Science.gov

Sample records for actual power consumption

  1. Power and Control in Kathmandu: A Comparison of Attempted Power, Actual Power, and Achieved Power.

    PubMed

    Emery, Clifton R; Thapa, Sirjana; Wu, Shali

    2016-05-05

    We argue that the concept of power has been inadvertently sidelined in recent theory and research on husband violence. Three types of relationship power may matter with respect to husband violence: attempted power, actual power, and achieved power. Analyses of a randomly selected representative sample of 270 married or partnered women in Kathmandu showed that actual power was related to husband violence prevalence, severity, and injury. Achieved power was related to husband violence prevalence and severity, and attempted power was related to husband violence injury. Implications are discussed.

  2. Power Delivery from an Actual Thermoelectric Generation System

    NASA Astrophysics Data System (ADS)

    Kaibe, Hiromasa; Kajihara, Takeshi; Nagano, Kouji; Makino, Kazuya; Hachiuma, Hirokuni; Natsuume, Daisuke

    2014-06-01

    Similar to photovoltaic (PV) and fuel cells, thermoelectric generators (TEGs) supply direct-current (DC) power, essentially requiring DC/alternating current (AC) conversion for delivery as electricity into the grid network. Use of PVs is already well established through power conditioning systems (PCSs) that enable DC/AC conversion with maximum-power-point tracking, which enables commercial use by customers. From the economic, legal, and regulatory perspectives, a commercial PCS for PVs should also be available for TEGs, preferably as is or with just simple adjustment. Herein, we report use of a PV PCS with an actual TEG. The results are analyzed, and proper application for TEGs is proposed.

  3. Power consumption monitoring using additional monitoring device

    SciTech Connect

    Truşcă, M. R. C. Albert, Ş. Tudoran, C. Soran, M. L. Fărcaş, F.; Abrudean, M.

    2013-11-13

    Today, emphasis is placed on reducing power consumption. Computers are large consumers; therefore it is important to know the total consumption of computing systems. Since their optimal functioning requires quite strict environmental conditions, without much variation in temperature and humidity, reducing energy consumption cannot be made without monitoring environmental parameters. Thus, the present work uses a multifunctional electric meter UPT 210 for power consumption monitoring. Two applications were developed: software which carries meter readings provided by electronic and programming facilitates remote device and a device for temperature monitoring and control. Following temperature variations that occur both in the cooling system, as well as the ambient, can reduce energy consumption. For this purpose, some air conditioning units or some computers are stopped in different time slots. These intervals were set so that the economy is high, but the work's Datacenter is not disturbed.

  4. Exploring human inactivity in computer power consumption

    NASA Astrophysics Data System (ADS)

    Candrawati, Ria; Hashim, Nor Laily Binti

    2016-08-01

    Managing computer power consumption has become an important challenge in computer society and this is consistent with a trend where a computer system is more important to modern life together with a request for increased computing power and functions continuously. Unfortunately, previous approaches are still inadequately designed to handle the power consumption problem due to unpredictable workload of a system caused by unpredictable human behaviors. This is happens due to lack of knowledge in a software system and the software self-adaptation is one approach in dealing with this source of uncertainty. Human inactivity is handled by adapting the behavioral changes of the users. This paper observes human inactivity in the computer usage and finds that computer power usage can be reduced if the idle period can be intelligently sensed from the user activities. This study introduces Control, Learn and Knowledge model that adapts the Monitor, Analyze, Planning, Execute control loop integrates with Q Learning algorithm to learn human inactivity period to minimize the computer power consumption. An experiment to evaluate this model was conducted using three case studies with same activities. The result show that the proposed model obtained those 5 out of 12 activities shows the power decreasing compared to others.

  5. Low power-consumption quantum cascade lasers

    NASA Astrophysics Data System (ADS)

    Katsuyama, Tsukuru; Hashimoto, Jun-ichi; Yoshinaga, Hiroyuki; Mori, Hiroki; Tsuji, Yukihiro; Murata, Makoto; Ekawa, Mitsuru; Tanahashi, Toshiyuki

    2015-01-01

    Quantum cascade lasers (QCLs) are promising light sources for real time high-sensitivity gas sensing in the mid-infrared region. For the practical use of QCLs as a compact and portable gas sensor, their power-consumption needs to be reduced. We report a successful operation of a low power-consumption distributed feedback (DFB) QCL. For the reduction of power consumption, we introduced a vertical-transition structure in a core region to improve carrier transition efficiency and reduced the core volume. DFB-QCL epitaxial structure was grown by low-pressure OMVPE. The core region consists of AlInAs/GaInAs superlattices lattice-matched to InP. A first-order Bragg-grating was formed near the core region to obtain a large coupling coefficiency. A mesa-strip was formed by reactive ion etching and a buried-heterostructure was fabricated by the regrowth of semi-insulating InP. High-reflective facet coatings were also performed to decrease the mirror loss for the reduction of the threshold current. A device (5x500μm) operated with a single mode in the wavelength region from 7.23μm to 7.27μm. The threshold current and threshold voltage under CW operation at 20 °C were 52mA and 8.4V respectively. A very low threshold power-consumption as low as 0.44 W was achieved, which is among the lowest values at room temperature to our knowledge.

  6. Food consumption and the actual statistics of cardiovascular diseases: an epidemiological comparison of 42 European countries

    PubMed Central

    Grasgruber, Pavel; Sebera, Martin; Hrazdira, Eduard; Hrebickova, Sylva; Cacek, Jan

    2016-01-01

    Background The aim of this ecological study was to identify the main nutritional factors related to the prevalence of cardiovascular diseases (CVDs) in Europe, based on a comparison of international statistics. Design The mean consumption of 62 food items from the FAOSTAT database (1993–2008) was compared with the actual statistics of five CVD indicators in 42 European countries. Several other exogenous factors (health expenditure, smoking, body mass index) and the historical stability of results were also examined. Results We found exceptionally strong relationships between some of the examined factors, the highest being a correlation between raised cholesterol in men and the combined consumption of animal fat and animal protein (r=0.92, p<0.001). The most significant dietary correlate of low CVD risk was high total fat and animal protein consumption. Additional statistical analyses further highlighted citrus fruits, high-fat dairy (cheese) and tree nuts. Among other non-dietary factors, health expenditure showed by far the highest correlation coefficients. The major correlate of high CVD risk was the proportion of energy from carbohydrates and alcohol, or from potato and cereal carbohydrates. Similar patterns were observed between food consumption and CVD statistics from the period 1980–2000, which shows that these relationships are stable over time. However, we found striking discrepancies in men's CVD statistics from 1980 and 1990, which can probably explain the origin of the ‘saturated fat hypothesis’ that influenced public health policies in the following decades. Conclusion Our results do not support the association between CVDs and saturated fat, which is still contained in official dietary guidelines. Instead, they agree with data accumulated from recent studies that link CVD risk with the high glycaemic index/load of carbohydrate-based diets. In the absence of any scientific evidence connecting saturated fat with CVDs, these findings show that

  7. Power consumption analysis DBD plasma ozone generator

    NASA Astrophysics Data System (ADS)

    Nur, M.; Restiwijaya, M.; Muchlisin, Z.; Susan, I. A.; Arianto, F.; Widyanto, S. A.

    2016-11-01

    Studies on the consumption of energy by an ozone generator with various constructions electrodes of dielectric barrier discharge plasma (DBDP) reactor has been carried out. This research was done to get the configuration of the reactor, that is capable to produce high ozone concentrations with low energy consumption. BDBP reactors were constructed by spiral- cylindrical configuration, plasma ozone was generated by high voltage AC voltage up to 25 kV and maximum frequency of 23 kHz. The reactor consists of an active electrode in the form of a spiral-shaped with variation diameter Dc, and it was made by using copper wire with diameter Dw. In this research, we variated number of loops coil windings N as well as Dc and Dw. Ozone concentrations greater when the wire's diameter Dw and the diameter of the coil windings applied was greater. We found that impedance greater will minimize the concentration of ozone, in contrary to the greater capacitance will increase the concentration of ozone. The ozone concentrations increase with augmenting of power. Maximum power is effective at DBD reactor spiral-cylinder is on the Dc = 20 mm, Dw = 1.2 mm, and the number of coil windings N = 10 loops with the resulting concentration is greater than 20 ppm and it consumes energy of 177.60 watts

  8. Standby power consumption in U.S. residences

    SciTech Connect

    Huber, W.

    1997-12-01

    {open_quotes}Leaking electricity{close_quotes} is the electricity consumed by appliances while they are switched {open_quotes}off{close_quote} or not performing their principal function. Leaking electricity represents approximately 5 % of U.S. residential electricity. This is a relatively new phenomenon and is a result of proliferation of electronic equipment in homes. The standby losses in TVs, VCRs, compact audio systems, and cable boxes account for almost 40% of all leaking electricity. There is a wide range in standby losses in each appliance group. For example, standby losses in compact audio systems range from 2.1 to 28.6 W, even though their features are identical. In some cases, leaking electricity while switched off was only slightly less than energy consumption in the on mode. New features in these appliances may greatly increase leaking electricity, such as electronic program guides in TVs and cable boxes. In the standby mode, these new features require many extra components energized to permit the downloading of information. Several techniques are available to cut standby losses, most without using any new technologies. Simple redesign of circuits to avoid energizing unused components appears to save the most energy. A separate power supply, precisely designed for the actual power needed, is another solution. A switch mode power supply can substitute for the less efficient linear power supply. Switch mode power supplies cut no-load and standby losses by 60-80%. The combination of these techniques can cut leaking electricity by greater than 75%.

  9. Exposure to alcohol commercials in movie theaters affects actual alcohol consumption in young adult high weekly drinkers: an experimental study.

    PubMed

    Koordeman, Renske; Anschutz, Doeschka J; Engels, Rutger C M E

    2011-01-01

    The present pilot study examined the effects of alcohol commercials shown in movie theaters on the alcohol consumption of young adults who see these commercials. A two (alcohol commercials vs. nonalcohol commercials) by two (high weekly alcohol consumption vs. low weekly alcohol consumption) between-participant design was used, in which 184 young adults (age: 16-28 years) were exposed to a movie that was preceded by either alcohol commercials or nonalcohol commercials. Participants' actual alcohol consumption while watching the movie ("Watchmen") was examined. An analysis of variance (ANOVA) was conducted to examine the effects of the commercial condition on alcohol consumption. An interaction effect was found between commercial condition and weekly alcohol consumption (p < .001). Alcohol consumption among high weekly alcohol drinkers was higher in the alcohol commercial condition than in the nonalcohol commercial condition, whereas no differences were found in alcohol consumption between commercial conditions among low weekly alcohol drinkers. No gender differences were found in the association between exposure to alcohol commercials, weekly drinking, and alcohol use. Thus, exposure to alcohol commercials prior to a movie in a movie theater can directly influence alcohol consumption among high weekly alcohol consumers.

  10. Power Play: Calculating Home Electricity Consumption

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2007-01-01

    With both energy usage and energy costs rising rapidly, people can benefit from paying closer attention to their consumption of energy. Students can gain greater awareness of their personal use of electricity and get some excellent experience with the practical application of mathematics by studying their families' consumption of electricity. A…

  11. Liner shape and power consumption in rotary mills

    SciTech Connect

    Valderrama, W.; Grandela, P.; Magne, L.

    1995-12-31

    The effect of liner shape on power consumption was studied in a small laboratory mill under various operating conditions. It was found that the angle subtended between the lifter front face and the face in contact with the mill case has the most significant influence. The increasing height of lifter reduced power consumption, whereas the lifter spacing did not show any influence. The effect of height is less relevant at lower front angles. Highest power consumption is achieved with a 450 front angle. A comparison of cylinders and balls under identical conditions gives higher power consumption for ball charges. The data does suggest that, for maximum power draw, slip in the outer layers of the charge and the early recirculation of energy to the mill case should be avoided. Both factors prevent an efficient energy transfer to the mill charge.

  12. Whole-house measurements of standby power consumption

    SciTech Connect

    Ross, J.P.; Meier, Alan

    2000-09-15

    We investigated the variation in standby power consumption in ten California homes. Total standby power in the homes ranged from 14-169W, with an average of 67 W. This corresponded to 5 percent-26 percent of the homes' annual electricity use. The appliances with the largest standby losses were televisions, set-top boxes and printers. The large variation in the standby power of appliances providing the same service demonstrates that manufacturers are able to reduce standby losses without degrading performance. Replacing existing units with appliances with 1 W or less of standby power would reduce standby losses by 68 percent.

  13. Ultra-low power consumption military communication systems

    NASA Astrophysics Data System (ADS)

    Lowy, Menahem; Chin, Chi-Yuan; Tiemann, Jerome J.

    The authors present general techniques to reduce the power consumption while increasing the clock rate and maximizing the silicon area of CMOS circuits. Modern digital signal processing implementations suffer from high power dissipation while requiring large silicon area. A technique based on the use of additional transistors with a modified threshold is described. This technique lowers the power-delay product of transmission-gate intensive CMOS circuits compared to standard CMOS technology. Resulting circuits exhibit a reduced power dissipation while enabling increased clock rate and reduced implementation area by a factor of 2. Use of additional circuit optimization techniques improves the efficiency of CMOS circuits by a factor of 3 to 4.

  14. [Epidemiologic studies on role of nutrition in development of osteoarthrosis. Report 2. Actual consumption of food and risk assessment of their influence in development of osteoarthrosis].

    PubMed

    Martinchik, A N; Khodyrev, V N; Peskova, E V

    2010-01-01

    We studied the actual consumption of specific food groups of patients with osteoarthritis (OA) and analyzed the nutritional risk factors for OA in case-control study. Level of consumption of all types of dairy products was significantly lower in the group of patients with OA compared with controls. The relative risk of developing OA in the consumption of less than 573 g (median) of dairy products in terms of milk increases by 5-6 times.

  15. Profiling an application for power consumption during execution on a compute node

    DOEpatents

    Archer, Charles J; Blocksome, Michael A; Peters, Amanda E; Ratterman, Joseph D; Smith, Brian E

    2013-09-17

    Methods, apparatus, and products are disclosed for profiling an application for power consumption during execution on a compute node that include: receiving an application for execution on a compute node; identifying a hardware power consumption profile for the compute node, the hardware power consumption profile specifying power consumption for compute node hardware during performance of various processing operations; determining a power consumption profile for the application in dependence upon the application and the hardware power consumption profile for the compute node; and reporting the power consumption profile for the application.

  16. Profiling an application for power consumption during execution on a plurality of compute nodes

    DOEpatents

    Archer, Charles J.; Blocksome, Michael A.; Peters, Amanda E.; Ratterman, Joseph D.; Smith, Brian E.

    2012-08-21

    Methods, apparatus, and products are disclosed for profiling an application for power consumption during execution on a compute node that include: receiving an application for execution on a compute node; identifying a hardware power consumption profile for the compute node, the hardware power consumption profile specifying power consumption for compute node hardware during performance of various processing operations; determining a power consumption profile for the application in dependence upon the application and the hardware power consumption profile for the compute node; and reporting the power consumption profile for the application.

  17. `PROBABILISTIC Knowledge' as `OBJECTIVE Knowledge' in Quantum Mechanics: Potential Immanent Powers Instead of Actual Properties

    NASA Astrophysics Data System (ADS)

    Ronde, Christian De

    In classical physics, probabilistic or statistical knowledge has been always related to ignorance or inaccurate subjective knowledge about an actual state of affairs. This idea has been extended to quantum mechanics through a completely incoherent interpretation of the Fermi-Dirac and Bose-Einstein statistics in terms of "strange" quantum particles. This interpretation, naturalized through a widespread "way of speaking" in the physics community, contradicts Born's physical account of Ψ as a "probability wave" which provides statistical information about outcomes that, in fact, cannot be interpreted in terms of `ignorance about an actual state of affairs'. In the present paper we discuss how the metaphysics of actuality has played an essential role in limiting the possibilities of understating things differently. We propose instead a metaphysical scheme in terms of immanent powers with definite potentia which allows us to consider quantum probability in a new light, namely, as providing objective knowledge about a potential state of affairs.

  18. Reducing power consumption during execution of an application on a plurality of compute nodes

    DOEpatents

    Archer, Charles J [Rochester, MN; Blocksome, Michael A [Rochester, MN; Peters, Amanda E [Rochester, MN; Ratterman, Joseph D [Rochester, MN; Smith, Brian E [Rochester, MN

    2012-06-05

    Methods, apparatus, and products are disclosed for reducing power consumption during execution of an application on a plurality of compute nodes that include: executing, by each compute node, an application, the application including power consumption directives corresponding to one or more portions of the application; identifying, by each compute node, the power consumption directives included within the application during execution of the portions of the application corresponding to those identified power consumption directives; and reducing power, by each compute node, to one or more components of that compute node according to the identified power consumption directives during execution of the portions of the application corresponding to those identified power consumption directives.

  19. Environmental effects of interstate power trading on electricity consumption mixes

    SciTech Connect

    Joe Marriott; H. Scott Matthews

    2005-11-15

    Although many studies of electricity generation use national or state average generation mix assumptions, in reality a great deal of electricity is transferred between states with very different mixes of fossil and renewable fuels, and using the average numbers could result in incorrect conclusions in these studies. The authors create electricity consumption profiles for each state and for key industry sectors in the U.S. based on existing state generation profiles, net state power imports, industry presence by state, and an optimization model to estimate interstate electricity trading. Using these 'consumption mixes' can provide a more accurate assessment of electricity use in life-cycle analyses. It is concluded that the published generation mixes for states that import power are misleading, since the power consumed in-state has a different makeup than the power that was generated. And, while most industry sectors have consumption mixes similar to the U.S. average, some of the most critical sectors of the economy - such as resource extraction and material processing sectors - are very different. This result does validate the average mix assumption made in many environmental assessments, but it is important to accurately quantify the generation methods for electricity used when doing life-cycle analyses. 16 refs., 7 figs., 2 tabs.

  20. Environmental effects of interstate power trading on electricity consumption mixes.

    PubMed

    Marriott, Joe; Matthews, H Scott

    2005-11-15

    Although many studies of electricity generation use national or state average generation mix assumptions, in reality a great deal of electricity is transferred between states with very different mixes of fossil and renewable fuels, and using the average numbers could result in incorrect conclusions in these studies. We create electricity consumption profiles for each state and for key industry sectors in the U.S. based on existing state generation profiles, net state power imports, industry presence by state, and an optimization model to estimate interstate electricity trading. Using these "consumption mixes" can provide a more accurate assessment of electricity use in life-cycle analyses. We conclude that the published generation mixes for states that import power are misleading, since the power consumed in-state has a different makeup than the power that was generated. And, while most industry sectors have consumption mixes similar to the U.S. average, some of the most critical sectors of the economy--such as resource extraction and material processing sectors--are very different. This result does validate the average mix assumption made in many environmental assessments, but it is important to accurately quantify the generation methods for electricity used when doing life-cycle analyses.

  1. Power consumption analysis of operating systems for wireless sensor networks.

    PubMed

    Lajara, Rafael; Pelegrí-Sebastiá, José; Perez Solano, Juan J

    2010-01-01

    In this paper four wireless sensor network operating systems are compared in terms of power consumption. The analysis takes into account the most common operating systems--TinyOS v1.0, TinyOS v2.0, Mantis and Contiki--running on Tmote Sky and MICAz devices. With the objective of ensuring a fair evaluation, a benchmark composed of four applications has been developed, covering the most typical tasks that a Wireless Sensor Network performs. The results show the instant and average current consumption of the devices during the execution of these applications. The experimental measurements provide a good insight into the power mode in which the device components are running at every moment, and they can be used to compare the performance of different operating systems executing the same tasks.

  2. Power Consumption Analysis of Operating Systems for Wireless Sensor Networks

    PubMed Central

    Lajara, Rafael; Pelegrí-Sebastiá, José; Perez Solano, Juan J.

    2010-01-01

    In this paper four wireless sensor network operating systems are compared in terms of power consumption. The analysis takes into account the most common operating systems—TinyOS v1.0, TinyOS v2.0, Mantis and Contiki—running on Tmote Sky and MICAz devices. With the objective of ensuring a fair evaluation, a benchmark composed of four applications has been developed, covering the most typical tasks that a Wireless Sensor Network performs. The results show the instant and average current consumption of the devices during the execution of these applications. The experimental measurements provide a good insight into the power mode in which the device components are running at every moment, and they can be used to compare the performance of different operating systems executing the same tasks. PMID:22219688

  3. Optimization of CCGT power plant and performance analysis using MATLAB/Simulink with actual operational data.

    PubMed

    Hasan, Naimul; Rai, Jitendra Nath; Arora, Bharat Bhushan

    2014-01-01

    In the Modern scenario, the naturally available resources for power generation are being depleted at an alarming rate; firstly due to wastage of power at consumer end, secondly due to inefficiency of various power system components. A Combined Cycle Gas Turbine (CCGT) integrates two cycles- Brayton cycle (Gas Turbine) and Rankine cycle (Steam Turbine) with the objective of increasing overall plant efficiency. This is accomplished by utilising the exhaust of Gas Turbine through a waste-heat recovery boiler to run a Steam Turbine. The efficiency of a gas turbine which ranges from 28% to 33% can hence be raised to about 60% by recovering some of the low grade thermal energy from the exhaust gas for steam turbine process. This paper is a study for the modelling of CCGT and comparing it with actual operational data. The performance model for CCGT plant was developed in MATLAB/Simulink.

  4. Extinction paradox and actual power scattered in light beam scattering: a two-dimensional study.

    PubMed

    Lai, H M; Wong, W Y; Wong, W H

    2004-12-01

    The extinction paradox is examined by applying partial-wave analysis to a two-dimensional light beam interacting with a long transverse cylinder without absorption, assuming always short wavelengths. We show that the (conventional) power scattered, Psca, except for a very narrow beam hitting a transparent cylinder on axis, is always double the power directly intercepted by the scatterer, Pitc, including a zero result for Psca when the incident beam is basically off the material surface. This contradicts the interpretation that attributes one half of Psca to edge diffraction by the scatterer. Furthermore, we identify the shadow-forming wave (SFW) from the partial-wave sum in the forward direction and show that the actual power scattered or, equivalently, the power depleted from the incident beam is equal to one unit of Pitc for a narrow beam, gets larger for a broader beam, and approaches 2Pitc for a very broad beam. The larger value in the latter cases is due to the extent of divergence of the SFW beam out of the incident beam at distances well beyond the Rayleigh range.

  5. Budget-based power consumption for application execution on a plurality of compute nodes

    DOEpatents

    Archer, Charles J; Inglett, Todd A; Ratterman, Joseph D

    2012-10-23

    Methods, apparatus, and products are disclosed for budget-based power consumption for application execution on a plurality of compute nodes that include: assigning an execution priority to each of one or more applications; executing, on the plurality of compute nodes, the applications according to the execution priorities assigned to the applications at an initial power level provided to the compute nodes until a predetermined power consumption threshold is reached; and applying, upon reaching the predetermined power consumption threshold, one or more power conservation actions to reduce power consumption of the plurality of compute nodes during execution of the applications.

  6. Budget-based power consumption for application execution on a plurality of compute nodes

    DOEpatents

    Archer, Charles J; Blocksome, Michael A; Peters, Amanda E; Ratterman, Joseph D; Smith, Brian E

    2013-02-05

    Methods, apparatus, and products are disclosed for budget-based power consumption for application execution on a plurality of compute nodes that include: assigning an execution priority to each of one or more applications; executing, on the plurality of compute nodes, the applications according to the execution priorities assigned to the applications at an initial power level provided to the compute nodes until a predetermined power consumption threshold is reached; and applying, upon reaching the predetermined power consumption threshold, one or more power conservation actions to reduce power consumption of the plurality of compute nodes during execution of the applications.

  7. The ``Green Lab'': Power Consumption by Commercial Light Bulbs

    NASA Astrophysics Data System (ADS)

    Einsporn, James A.; Zhou, Andrew F.

    2011-09-01

    Going "green" is a slogan that is very contemporary, both with industry and in the political arena. Choosing more energy-efficient devices is one way homeowners can "go green." A simple method is to change home lighting from hot incandescent bulbs to compact fluorescent lights (CFLs). But do they really save energy? How do their illuminations compare? Even if the CFLs are more energy efficient, they still add to our pollution problem because of the mercury inside them. Light-emitting diodes (LEDs) could be the answer, but they are not available at our local stores. Can LEDs be made to screw right into a standard socket? How expensive are they? What are the power consumptions of so-called "60-W" and "100-W" CFL and LED light bulbs? These are the questions that are answered during this lab activity. Students measure the voltage and current for each of the three types of bulbs, and then calculate the electrical power required by each. An optional experiment is to set the light outputs of each bulb so they are equal in intensity, and then determine the power consumed. While not practical in the home, this experiment gives students an understanding of value for their buck.

  8. Consumption of the electric power inside silent discharge reactors

    SciTech Connect

    Yehia, Ashraf

    2015-01-15

    An experimental study was made in this paper to investigate the relation between the places of the dielectric barriers, which cover the surfaces of the electrodes in the coaxial cylindrical reactors, and the rate of change of the electric power that is consumed in forming silent discharges. Therefore, silent discharges have been formed inside three coaxial cylindrical reactors. The dielectric barriers in these reactors were pasted on both the internal surface of the outer electrode in the first reactor and the external surface of the inner electrode in the second reactor as well as the surfaces of the two electrodes in the third reactor. The reactor under study has been fed by atmospheric air that flowed inside it with a constant rate at normal temperature and pressure, in parallel with the application of a sinusoidal ac voltage between the electrodes of the reactor. The electric power consumed in forming the silent discharges inside the three reactors was measured as a function of the ac peak voltage. The validity of the experimental results was investigated by applying Manley's equation on the same discharge conditions. The results have shown that the rate of consumption of the electric power relative to the ac peak voltage per unit width of the discharge gap improves by a ratio of either 26.8% or 80% or 128% depending on the places of the dielectric barriers that cover the surfaces of the electrodes inside the three reactors.

  9. A high speed, low power consumption LVDS interface for CMOS pixel sensors

    NASA Astrophysics Data System (ADS)

    Shi, Zhan; Tang, Zhenan; Tian, Yong; Pham, Hung; Valin, Isabelle; Jaaskelainen, Kimmo

    2015-01-01

    The use of CMOS Pixel Sensors (CPSs) offers a promising approach to the design of vertex detectors in High Energy Physics (HEP) experiments. As the CPS equipping the upgraded Solenoidal Tracker at RHIC (STAR) pixel detector, ULTIMATE perfectly illustrates the potential of CPSs for HEP applications. However, further development of CPSs with respect to readout speed is required to fulfill the readout time requirement of the next generation HEP detectors, such as the upgrade of A Large Ion Collider Experiment (ALICE) Inner Tracking System (ITS), the International Linear Collider (ILC), and the Compressed Baryonic Matter (CBM) vertex detectors. One actual limitation of CPSs is related to the speed of the Low-Voltage Differential Signaling (LVDS) circuitry implementing the interface between the sensor and the Data Acquisition (DAQ) system. To improve the transmission rate while keeping the power consumption at a low level, a source termination technique and a special current comparator were adopted for the LVDS driver and receiver, respectively. Moreover, hardening techniques are used. The circuitry was designed and submitted for fabrication in a 0.18-μm CMOS Image Sensor (CIS) process at the end of 2011. The test results indicated that the LVDS driver and receiver can operate properly at the data rate of 1.2 Gb/s with power consumption of 19.6 mW.

  10. Analysis of actual pressure point using the power flexible capacitive sensor during chest compression.

    PubMed

    Minami, Kouichiro; Kokubo, Yota; Maeda, Ichinosuke; Hibino, Shingo

    2017-02-01

    In chest compression for cardiopulmonary resuscitation (CPR), the lower half of the sternum is pressed according to the American Heart Association (AHA) guidelines 2010. These have been no studies which identify the exact location of the applied by individual chest compressions. We developed a rubber power-flexible capacitive sensor that could measure the actual pressure point of chest compression in real time. Here, we examined the pressure point of chest compression by ambulance crews during CPR using a mannequin. We included 179 ambulance crews. Chest compression was performed for 2 min. The pressure position was monitored, and the quality of chest compression was analyzed by using a flexible pressure sensor (Shinnosukekun™). Of the ambulance crews, 58 (32.4 %) pressed the center and 121 (67.6 %) pressed outside the proper area of chest compression. Many of them pressed outside the center; 8, 7, 41, and 90 pressed on the caudal, left, right, and cranial side, respectively. Average compression rate, average recoil, average depth, and average duty cycle were 108.6 counts per minute, 0.089, 4.5 cm, and 48.27 %, respectively. Many of the ambulance crews did not press on the sternal lower half definitely. This new device has the potential to improve the quality of CPR during training or in clinical practice.

  11. Optimizing electrical power consumption in SOA based optical packet switching nodes

    NASA Astrophysics Data System (ADS)

    Zhang, Shaotang; Hu, Weisheng; Sun, Weiqiang; He, Hao

    2011-12-01

    Since the underlying demand for network capacity can be satisfied only by extremely increasing transmission bit rate, processing speed, and switching capacity, it definitely will lead to increased power consumption of network nodes. Energy crisis is global crisis nowadays and it has brought up many problems. Power consumption is becoming a crucial issue in designing high-performance network devices. This paper studies the power consumption model of a kind of Optical Packet Switching (OPS) node based on Semiconductor Optical Amplifiers (SOA). Our results show that by dynamically adjusting the bias current of SOAs, the power consumption on an OPS node can be reduced considerably, especially when the traffic distribution across multiple ports is not balanced and inter-nodal distances vary. The total electrical power consumption can be cut off significantly. We also show the power consumption can be further reduced by jointly optimizing the thermoelectric cooler current.

  12. The power-consumption-controlled extruder: a tool for pellet production.

    PubMed

    Kleinebudde, P; Sølvberg, A J; Lindner, H

    1994-07-01

    Based on the assumption that there is a link between power consumption of an extruder and pellet properties, a control circuit for power consumption was developed. Powder and granulation liquid are fed separately into a twin-screw extruder. The power consumption is controlled by varying the pump rate at a given powder-feed rate; consequently each level of power consumption results in a specific water content of the extrudate for a particular formulation. The shape of pellets depends almost entirely on the level of power consumption irrespective of formulation. The size of dry pellets is additionally affected by a shrinking factor which depends on the water content. The power-consumption-controlled extruder is an appropriate tool for the production of pellets. The system is able to adapt the water content for a formulation automatically.

  13. Power wheelchair range testing and energy consumption during fatigue testing.

    PubMed

    Cooper, R A; VanSickle, D P; Albright, S J; Stewart, K J; Flannery, M; Robertson, R N

    1995-10-01

    The range of a power wheelchair depends on many factors including: battery type, battery state, wheelchair/rider weight, terrain, the efficiency of the drive train, and driving behavior. The purpose of this study was to evaluate the feasibility of three methods of estimating power wheelchair range. Another significant purpose was to compare the current draw on pavement to current draw on an International Standards Organization (ISO) Double Drum tester at one m/sec. Tests were performed on seven different power wheelchairs unloaded, and loaded with an ISO 100 kg test dummy. Each chair was configured according to the manufacturer's specifications, and tires were properly inflated. Experienced test technicians were used for the tennis court tests, and treadmill tests. An ISO 100 kg test dummy was used for the ISO Double Drum test. Energy consumption was measured over a distance of 1500 m for each of the three test conditions. The rolling surface was level in all cases. Repeated measure analysis of variance (ANOVA) revealed a significant difference (p = 0.0001) between the predicted range at maximum speed for the three tests. Post hoc analysis demonstrated a significant difference (p < 0.01) in estimated range at maximum speed between the Double Drum test and the treadmill test, as well as between the Double Drum test and the tennis court test. Our results indicate no significant difference (p > 0.05) between the predicted range at maximal speed between the treadmill and tennis court tests. A simple relationship does not exist between the results of range testing with the Double Drum tester and the tennis court. An alternative would be to permit the use of a treadmill for range testing as simple relationships between all pertinent treadmill and tennis court range data were found. For the Double Drum tester used, the current demand is higher than under normal usage. This presents a problem as current is related to load torque in a power wheelchair. Hence, the Double

  14. Measurements and modelling of base station power consumption under real traffic loads.

    PubMed

    Lorincz, Josip; Garma, Tonko; Petrovic, Goran

    2012-01-01

    Base stations represent the main contributor to the energy consumption of a mobile cellular network. Since traffic load in mobile networks significantly varies during a working or weekend day, it is important to quantify the influence of these variations on the base station power consumption. Therefore, this paper investigates changes in the instantaneous power consumption of GSM (Global System for Mobile Communications) and UMTS (Universal Mobile Telecommunications System) base stations according to their respective traffic load. The real data in terms of the power consumption and traffic load have been obtained from continuous measurements performed on a fully operated base station site. Measurements show the existence of a direct relationship between base station traffic load and power consumption. According to this relationship, we develop a linear power consumption model for base stations of both technologies. This paper also gives an overview of the most important concepts which are being proposed to make cellular networks more energy-efficient.

  15. Measurements and Modelling of Base Station Power Consumption under Real Traffic Loads †

    PubMed Central

    Lorincz, Josip; Garma, Tonko; Petrovic, Goran

    2012-01-01

    Base stations represent the main contributor to the energy consumption of a mobile cellular network. Since traffic load in mobile networks significantly varies during a working or weekend day, it is important to quantify the influence of these variations on the base station power consumption. Therefore, this paper investigates changes in the instantaneous power consumption of GSM (Global System for Mobile Communications) and UMTS (Universal Mobile Telecommunications System) base stations according to their respective traffic load. The real data in terms of the power consumption and traffic load have been obtained from continuous measurements performed on a fully operated base station site. Measurements show the existence of a direct relationship between base station traffic load and power consumption. According to this relationship, we develop a linear power consumption model for base stations of both technologies. This paper also gives an overview of the most important concepts which are being proposed to make cellular networks more energy-efficient. PMID:22666026

  16. Age-related increase in food spilling by laboratory mice may lead to significant overestimation of actual food consumption: implications for studies on dietary restriction, metabolism, and dose calculations.

    PubMed

    Starr, Marlene E; Saito, Hiroshi

    2012-10-01

    It is widely accepted that food consumption in humans declines with advanced age; however, data from mice remain controversial. Based on our previous observation that mice spill a considerable amount of food while eating, we hypothesized that increased food spillage in old mice masks actual food intake. To investigate whether mice exhibit age-associated declines in food consumption, we evaluated the actual food consumption of C57BL/6 mice at various ages by measuring both the amount of food in the food receptacle and the amount dropped to the cage bottom during feeding. We found that old mice dropped significantly more food (36% ± 8%) than young mice (18% ± 5%), which led to overestimations of food consumption, particularly in old mice. Although actual food consumption decreased in very old mice, food intake per body weight did not significantly change. These findings suggest that caution should be taken to accurately quantify food consumption by aged animals.

  17. Optimal Dynamic Sub-Threshold Technique for Extreme Low Power Consumption for VLSI

    NASA Technical Reports Server (NTRS)

    Duong, Tuan A.

    2012-01-01

    For miniaturization of electronics systems, power consumption plays a key role in the realm of constraints. Considering the very large scale integration (VLSI) design aspect, as transistor feature size is decreased to 50 nm and below, there is sizable increase in the number of transistors as more functional building blocks are embedded in the same chip. However, the consequent increase in power consumption (dynamic and leakage) will serve as a key constraint to inhibit the advantages of transistor feature size reduction. Power consumption can be reduced by minimizing the voltage supply (for dynamic power consumption) and/or increasing threshold voltage (V(sub th), for reducing leakage power). When the feature size of the transistor is reduced, supply voltage (V(sub dd)) and threshold voltage (V(sub th)) are also reduced accordingly; then, the leakage current becomes a bigger factor of the total power consumption. To maintain low power consumption, operation of electronics at sub-threshold levels can be a potentially strong contender; however, there are two obstacles to be faced: more leakage current per transistor will cause more leakage power consumption, and slow response time when the transistor is operated in weak inversion region. To enable low power consumption and yet obtain high performance, the CMOS (complementary metal oxide semiconductor) transistor as a basic element is viewed and controlled as a four-terminal device: source, drain, gate, and body, as differentiated from the traditional approach with three terminals: i.e., source and body, drain, and gate. This technique features multiple voltage sources to supply the dynamic control, and uses dynamic control to enable low-threshold voltage when the channel (N or P) is active, for speed response enhancement and high threshold voltage, and when the transistor channel (N or P) is inactive, to reduce the leakage current for low-leakage power consumption.

  18. Measurement and Characterization of Haswell Power and Energy Consumption

    SciTech Connect

    Huang, Song; Lang, Michael Kenneth; Pakin, Scott D.; Fu, Song

    2016-02-19

    This is a presentation intended for the NMC seminar. Its primary objective was to understand power-performance of Haswell EP for HPC; test four benchmark programs on PowerEdge R730 with control knobs; as well as test more applications, use more compute nodes, examine the effects of control knobs, and implement power capping.

  19. Reducing power consumption while performing collective operations on a plurality of compute nodes

    DOEpatents

    Archer, Charles J.; Blocksome, Michael A.; Peters, Amanda E.; Ratterman, Joseph D.; Smith, Brian E.

    2011-10-18

    Methods, apparatus, and products are disclosed for reducing power consumption while performing collective operations on a plurality of compute nodes that include: receiving, by each compute node, instructions to perform a type of collective operation; selecting, by each compute node from a plurality of collective operations for the collective operation type, a particular collective operation in dependence upon power consumption characteristics for each of the plurality of collective operations; and executing, by each compute node, the selected collective operation.

  20. Minimization of power consumption during charging of superconducting accelerating cavities

    NASA Astrophysics Data System (ADS)

    Bhattacharyya, Anirban Krishna; Ziemann, Volker; Ruber, Roger; Goryashko, Vitaliy

    2015-11-01

    The radio frequency cavities, used to accelerate charged particle beams, need to be charged to their nominal voltage after which the beam can be injected into them. The standard procedure for such cavity filling is to use a step charging profile. However, during initial stages of such a filling process a substantial amount of the total energy is wasted in reflection for superconducting cavities because of their extremely narrow bandwidth. The paper presents a novel strategy to charge cavities, which reduces total energy reflection. We use variational calculus to obtain analytical expression for the optimal charging profile. Energies, reflected and required, and generator peak power are also compared between the charging schemes and practical aspects (saturation, efficiency and gain characteristics) of power sources (tetrodes, IOTs and solid state power amplifiers) are also considered and analysed. The paper presents a methodology to successfully identify the optimal charging scheme for different power sources to minimize total energy requirement.

  1. Rotary ultrasonic machining of CFRP composites: a study on power consumption.

    PubMed

    Cong, W L; Pei, Z J; Deines, T W; Srivastava, Anil; Riley, L; Treadwell, C

    2012-12-01

    Carbon fiber reinforced plastic (CFRP) composites are very difficult to machine. A large number of holes need to be drilled in CFRP for many applications. Therefore, it is important to develop cost-effective drilling processes. CFRP has been drilled by rotary ultrasonic machining (RUM) successfully. The literature has reports about the effects of input variables on output variables (including cutting force, torque, surface roughness, tool wear, and workpiece delamination) in RUM of CFRP. However, there are no reports on power consumption in RUM of CFRP. This paper reports the first study on power consumption in RUM of CFRP. It reports an experimental investigation on effects of input variables (ultrasonic power, tool rotation speed, feedrate, and type of CFRP) on power consumption of each component (including ultrasonic power supply, spindle motor, coolant pump, and air compressor) and the entire RUM system.

  2. Evaluating the Power Consumption of Wireless Sensor Network Applications Using Models

    PubMed Central

    Dâmaso, Antônio; Freitas, Davi; Rosa, Nelson; Silva, Bruno; Maciel, Paulo

    2013-01-01

    Power consumption is the main concern in developing Wireless Sensor Network (WSN) applications. Consequently, several strategies have been proposed for investigating the power consumption of this kind of application. These strategies can help to predict the WSN lifetime, provide recommendations to application developers and may optimize the energy consumed by the WSN applications. While measurement is a known and precise strategy for power consumption evaluation, it is very costly, tedious and may be unfeasible considering the (usual) large number of WSN nodes. Furthermore, due to the inherent dynamism of WSNs, the instrumentation required by measurement techniques makes difficult their use in several different scenarios. In this context, this paper presents an approach for evaluating the power consumption of WSN applications by using simulation models along with a set of tools to automate the proposed approach. Starting from a programming language code, we automatically generate consumption models used to predict the power consumption of WSN applications. In order to evaluate the proposed approach, we compare the results obtained by using the generated models against ones obtained by measurement. PMID:23486217

  3. Evaluating the power consumption of wireless sensor network applications using models.

    PubMed

    Dâmaso, Antônio; Freitas, Davi; Rosa, Nelson; Silva, Bruno; Maciel, Paulo

    2013-03-13

    Power consumption is the main concern in developing Wireless Sensor Network (WSN) applications. Consequently, several strategies have been proposed for investigating the power consumption of this kind of application. These strategies can help to predict the WSN lifetime, provide recommendations to application developers and may optimize the energy consumed by the WSN applications. While measurement is a known and precise strategy for power consumption evaluation, it is very costly, tedious and may be unfeasible considering the (usual) large number of WSN nodes. Furthermore, due to the inherent dynamism of WSNs, the instrumentation required by measurement techniques makes difficult their use in several different scenarios. In this context, this paper presents an approach for evaluating the power consumption of WSN applications by using simulation models along with a set of tools to automate the proposed approach. Starting from a programming language code, we automatically generate consumption models used to predict the power consumption of WSN applications. In order to evaluate the proposed approach, we compare the results obtained by using the generated models against ones obtained by measurement.

  4. Sustainable power generation in continuous flow microbial fuel cell treating actual wastewater: influence of biocatalyst type on electricity production.

    PubMed

    Ismail, Zainab Z; Jaeel, Ali Jwied

    2013-01-01

    Microbial fuel cells (MFCs) have the potential to simultaneously treat wastewater for reuse and to generate electricity. This study mainly considers the performance of an upflow dual-chambered MFC continuously fueled with actual domestic wastewater and alternatively biocatalyzed with aerobic activated sludge and strain of Bacillus Subtilis. The behavior of MFCs during initial biofilm growth and characterization of anodic biofilm were studied. After 45 days of continuous operation, the biofilms on the anodic electrode were well developed. The performance of MFCs was mainly evaluated in terms of COD reductions and electrical power output. Results revealed that the COD removal efficiency was 84% and 90% and the stabilized power outputs were clearly observed achieving a maximum value of 120 and 270 mW/m(2) obtained for MFCs inoculated with mixed cultures and Bacillus Subtilis strain, respectively.

  5. Sustainable Power Generation in Continuous Flow Microbial Fuel Cell Treating Actual Wastewater: Influence of Biocatalyst Type on Electricity Production

    PubMed Central

    Ismail, Zainab Z.; Jaeel, Ali Jwied

    2013-01-01

    Microbial fuel cells (MFCs) have the potential to simultaneously treat wastewater for reuse and to generate electricity. This study mainly considers the performance of an upflow dual-chambered MFC continuously fueled with actual domestic wastewater and alternatively biocatalyzed with aerobic activated sludge and strain of Bacillus Subtilis. The behavior of MFCs during initial biofilm growth and characterization of anodic biofilm were studied. After 45 days of continuous operation, the biofilms on the anodic electrode were well developed. The performance of MFCs was mainly evaluated in terms of COD reductions and electrical power output. Results revealed that the COD removal efficiency was 84% and 90% and the stabilized power outputs were clearly observed achieving a maximum value of 120 and 270 mW/m2 obtained for MFCs inoculated with mixed cultures and Bacillus Subtilis strain, respectively. PMID:24453893

  6. A Network Selection Algorithm Considering Power Consumption in Hybrid Wireless Networks

    NASA Astrophysics Data System (ADS)

    Joe, Inwhee; Kim, Won-Tae; Hong, Seokjoon

    In this paper, we propose a novel network selection algorithm considering power consumption in hybrid wireless networks for vertical handover. CDMA, WiBro, WLAN networks are candidate networks for this selection algorithm. This algorithm is composed of the power consumption prediction algorithm and the final network selection algorithm. The power consumption prediction algorithm estimates the expected lifetime of the mobile station based on the current battery level, traffic class and power consumption for each network interface card of the mobile station. If the expected lifetime of the mobile station in a certain network is not long enough compared the handover delay, this particular network will be removed from the candidate network list, thereby preventing unnecessary handovers in the preprocessing procedure. On the other hand, the final network selection algorithm consists of AHP (Analytic Hierarchical Process) and GRA (Grey Relational Analysis). The global factors of the network selection structure are QoS, cost and lifetime. If user preference is lifetime, our selection algorithm selects the network that offers longest service duration due to low power consumption. Also, we conduct some simulations using the OPNET simulation tool. The simulation results show that the proposed algorithm provides longer lifetime in the hybrid wireless network environment.

  7. Power consumption of rotary blood pumps: pulsatile versus constant-speed mode.

    PubMed

    Pirbodaghi, Tohid; Cotter, Chris; Bourque, Kevin

    2014-12-01

    We investigated the power consumption of a HeartMate III rotary blood pump based on in vitro experiments performed in a cardiovascular simulator. To create artificial-pulse mode, we modulated the pump speed by decreasing the mean speed by 2000 rpm for 200 ms and then increasing speed by 4000 rpm (mean speeds plus 2000 rpm) for another 200 ms, creating a square waveform shape. The HeartMate III was connected to a cardiovascular simulator consisting of a hydraulic pump system to simulate left ventricle pumping action, arterial and venous compliance chambers, and an adjustable valve for peripheral resistance to facilitate the desired aortic pressure. The simulator operated based on Suga's elastance model to mimic the Starling response of the heart, thereby reproducing physiological blood flow and pressure conditions. We measured the instantaneous total electrical current and voltage of the pump to evaluate its power consumption. The aim was to answer these fundamental questions: (i) How does pump speed modulation affect pump power consumption? (ii) How does the power consumption vary in relation to external pulsatile flow? The results indicate that speed modulation and external pulsatile flow both moderately increase the power consumption. Increasing the pump speed reduces the impact of external pulsatile flow.

  8. AC Power Consumption of Single-Walled Carbon Nanotube Interconnects: Non-Equilibrium Green's Function Simulation

    NASA Astrophysics Data System (ADS)

    Yamamoto, Takahiro; Sasaoka, Kenji; Watanabe, Satoshi

    2012-04-01

    We theoretically investigate the emittance and dynamic dissipation of a nanoscale interconnect consisting of a metallic single-walled carbon nanotube using the non-equilibrium Green's function technique for AC electronic transport. We show that the emittance and dynamic dissipation depend strongly on the contact conditions of the interconnect and that the power consumption can be reduced by adjusting the contact conditions. We propose an appropriate condition of contact that yields a high power factor and low apparent power.

  9. A new bias scheme for a low power consumption ReRAM crossbar array

    NASA Astrophysics Data System (ADS)

    Sun, Wookyung; Choi, Sujin; Shin, Hyungsoon

    2016-08-01

    This paper proposes a new bias scheme for a crossbar array that can improve the power consumption and read margin. The concept of the newly proposed 5/12 bias scheme is to reduce the bias of the unselected cells for power consumption and the bias of half-selected cells for a reduced line voltage drop of the selected cell. In the 5/12 bias scheme, the unselected word line and bit line are biased to 5 × V app/12 and 7 × V app/12, respectively. The electrical characteristics of the 5/12 bias scheme are evaluated by HSPICE simulations and it is found that appropriate nonlinearity of selector can simultaneously achieve low power consumption and high read margin for 5/12 bias scheme.

  10. Signal Processing for a Lunar Array: Minimizing Power Consumption

    NASA Technical Reports Server (NTRS)

    D'Addario, Larry; Simmons, Samuel

    2011-01-01

    Motivation for the study is: (1) Lunar Radio Array for low frequency, high redshift Dark Ages/Epoch of Reionization observations (z =6-50, f=30-200 MHz) (2) High precision cosmological measurements of 21 cm H I line fluctuations (3) Probe universe before first star formation and provide information about the Intergalactic Medium and evolution of large scale structures (5) Does the current cosmological model accurately describe the Universe before reionization? Lunar Radio Array is for (1) Radio interferometer based on the far side of the moon (1a) Necessary for precision measurements, (1b) Shielding from earth-based and solar RFI (12) No permanent ionosphere, (2) Minimum collecting area of approximately 1 square km and brightness sensitivity 10 mK (3)Several technologies must be developed before deployment The power needed to process signals from a large array of nonsteerable elements is not prohibitive, even for the Moon, and even in current technology. Two different concepts have been proposed: (1) Dark Ages Radio Interferometer (DALI) (2)( Lunar Array for Radio Cosmology (LARC)

  11. Cognitive radio adaptation for power consumption minimization using biogeography-based optimization

    NASA Astrophysics Data System (ADS)

    Qi, Pei-Han; Zheng, Shi-Lian; Yang, Xiao-Niu; Zhao, Zhi-Jin

    2016-12-01

    Adaptation is one of the key capabilities of cognitive radio, which focuses on how to adjust the radio parameters to optimize the system performance based on the knowledge of the radio environment and its capability and characteristics. In this paper, we consider the cognitive radio adaptation problem for power consumption minimization. The problem is formulated as a constrained power consumption minimization problem, and the biogeography-based optimization (BBO) is introduced to solve this optimization problem. A novel habitat suitability index (HSI) evaluation mechanism is proposed, in which both the power consumption minimization objective and the quality of services (QoS) constraints are taken into account. The results show that under different QoS requirement settings corresponding to different types of services, the algorithm can minimize power consumption while still maintaining the QoS requirements. Comparison with particle swarm optimization (PSO) and cat swarm optimization (CSO) reveals that BBO works better, especially at the early stage of the search, which means that the BBO is a better choice for real-time applications. Project supported by the National Natural Science Foundation of China (Grant No. 61501356), the Fundamental Research Funds of the Ministry of Education, China (Grant No. JB160101), and the Postdoctoral Fund of Shaanxi Province, China.

  12. Power consumption analysis of priority-based service differentiation scheme for LR-WPANs

    NASA Astrophysics Data System (ADS)

    Kim, Meejoung; Hwang, Eenjun

    2016-06-01

    In this paper, we investigate the effect of service differentiation on the power consumption in contention period of IEEE 802.15.4 sensor networks. Power consumption is analysed for two different service differentiation schemes under non-saturation condition. The two service differentiation schemes are the differentiation by the backoff exponent (BED) and differentiation by the contention window (CWD), which provide multilevel differentiated services in beacon-enabled mode with slotted carrier sense multiple access/collision avoidance (CSMA/CA) algorithm. The analysis is based on the stationary probabilities of a discrete-time Markov chain, which is a model of CSMA/CA describing the state of a head packet of a device. Numerical results show that CWD uses the power more efficiently and performs better in terms of throughput, while BED more differentiates the service.

  13. Methods for estimating water consumption for thermoelectric power plants in the United States

    USGS Publications Warehouse

    Diehl, Timothy H.; Harris, Melissa; Murphy, Jennifer C.; Hutson, Susan S.; Ladd, David E.

    2013-01-01

    Heat budgets were constructed for the first four generation-type categories; data at solar thermal plants were insufficient for heat budgets. These heat budgets yielded estimates of the amount of heat transferred to the condenser. The ratio of evaporation to the heat discharged through the condenser was estimated using existing heat balance models that are sensitive to environmental data; this feature allows estimation of consumption under different climatic conditions. These two estimates were multiplied to yield an estimate of consumption at each power plant.

  14. USING TIME VARIANT VOLTAGE TO CALCULATE ENERGY CONSUMPTION AND POWER USE OF BUILDING SYSTEMS

    SciTech Connect

    Makhmalbaf, Atefe; Augenbroe , Godfried

    2015-12-09

    Buildings are the main consumers of electricity across the world. However, in the research and studies related to building performance assessment, the focus has been on evaluating the energy efficiency of buildings whereas the instantaneous power efficiency has been overlooked as an important aspect of total energy consumption. As a result, we never developed adequate models that capture both thermal and electrical characteristics (e.g., voltage) of building systems to assess the impact of variations in the power system and emerging technologies of the smart grid on buildings energy and power performance and vice versa. This paper argues that the power performance of buildings as a function of electrical parameters should be evaluated in addition to systems’ mechanical and thermal behavior. The main advantage of capturing electrical behavior of building load is to better understand instantaneous power consumption and more importantly to control it. Voltage is one of the electrical parameters that can be used to describe load. Hence, voltage dependent power models are constructed in this work and they are coupled with existing thermal energy models. Lack of models that describe electrical behavior of systems also adds to the uncertainty of energy consumption calculations carried out in building energy simulation tools such as EnergyPlus, a common building energy modeling and simulation tool. To integrate voltage-dependent power models with thermal models, the thermal cycle (operation mode) of each system was fed into the voltage-based electrical model. Energy consumption of systems used in this study were simulated using EnergyPlus. Simulated results were then compared with estimated and measured power data. The mean square error (MSE) between simulated, estimated, and measured values were calculated. Results indicate that estimated power has lower MSE when compared with measured data than simulated results. Results discussed in this paper will illustrate the

  15. Evaluation of power consumption of paddle wheel in an open raceway pond.

    PubMed

    Li, Yanxi; Zhang, Qinghua; Wang, Zhihui; Wu, Xia; Cong, Wei

    2014-07-01

    Open raceway ponds are widely adopted in microalgae cultivation. Paddle wheels consume the most part of power during the process of cultivation in open raceway ponds. The configuration of blades directly determines power consumption for paddle wheels. In this work, power consumption of four blades configurations was determined in a bench-scale open raceway pond of 2.2 m(2). The effect of blades configuration, the influence of filling levels from 5 to 15 cm and influence of rotational speeds from 7 to 15 r min(-1) on shaft power consumption (P(S)), fluid velocity (U(c)) and paddle wheel efficiency (η) was investigated. Results demonstrated that flat blades were the most efficient configuration. Higher culture depth led to larger U(c), more P(s) and larger η, especially when blades were not totally immerged in water. Under the same filling level and rotational speed, the value of P(S) decreases in the order: zigzagged, flat, forward-curved and back-curved, respectively. The zigzagged blades led to a larger U(c) at the culture depth of 5 cm, while flat and forward-curved blades drove a larger U(c) when culture depth was higher than 5 cm. The maximum value of η was 0.50 with flat blades at 11 r min(-1) and 15 cm of culture depth. Empirical correlations of non-dimensional numbers related to operation parameters and blades geometry for four paddle wheel blades were also proposed.

  16. Reducing power consumption during execution of an application on a plurality of compute nodes

    DOEpatents

    Archer, Charles J.; Blocksome, Michael A.; Peters, Amanda E.; Ratterman, Joseph D.; Smith, Brian E.

    2013-09-10

    Methods, apparatus, and products are disclosed for reducing power consumption during execution of an application on a plurality of compute nodes that include: powering up, during compute node initialization, only a portion of computer memory of the compute node, including configuring an operating system for the compute node in the powered up portion of computer memory; receiving, by the operating system, an instruction to load an application for execution; allocating, by the operating system, additional portions of computer memory to the application for use during execution; powering up the additional portions of computer memory allocated for use by the application during execution; and loading, by the operating system, the application into the powered up additional portions of computer memory.

  17. Measured effect of wind generation on the fuel consumption of an isolated diesel power system

    NASA Astrophysics Data System (ADS)

    Stiller, P. H.; Scott, G. W.; Shaltens, R. K.

    1983-06-01

    The Block Island Power Company (BIPCO), on Block Island, Rhode Island, operates an isolated electric power system consisting of diesel generation and an experimental wind turbine. The 150-kW wind turbine, designated MOD-OA by the U.S. Department of Energy is typically operated in parallel with two diesel generators to serve an average winter load of 350 kW. Wind generation serves up to 60 percent of the system demand depending on wind speed and total system load. Results of diesel fuel consumption measurements are given for the diesel units operated in parallel with the wind turbine and again without the wind turbine. The fuel consumption data are used to calculate the amount of fuel displaced by wind energy. Results indicate that the wind turbine displaced 25,700 lbs. of the diesel fuel during the test period, representing a calculated reduction in fuel consumption of 6.7 percent while generating 11 percent of the total electric energy. The amount of displaced fuel depends on operating conditions and system load. It is also shown that diesel engine throttle activity resulting from wind gusts which rapidly change the wind turbine output do not significantly influence fuel consumption.

  18. Measured effect of wind generation on the fuel consumption of an isolated diesel power system

    NASA Technical Reports Server (NTRS)

    Stiller, P. H.; Scott, G. W.; Shaltens, R. K.

    1983-01-01

    The Block Island Power Company (BIPCO), on Block Island, Rhode Island, operates an isolated electric power system consisting of diesel generation and an experimental wind turbine. The 150-kW wind turbine, designated MOD-OA by the U.S. Department of Energy is typically operated in parallel with two diesel generators to serve an average winter load of 350 kW. Wind generation serves up to 60 percent of the system demand depending on wind speed and total system load. Results of diesel fuel consumption measurements are given for the diesel units operated in parallel with the wind turbine and again without the wind turbine. The fuel consumption data are used to calculate the amount of fuel displaced by wind energy. Results indicate that the wind turbine displaced 25,700 lbs. of the diesel fuel during the test period, representing a calculated reduction in fuel consumption of 6.7 percent while generating 11 percent of the total electric energy. The amount of displaced fuel depends on operating conditions and system load. It is also shown that diesel engine throttle activity resulting from wind gusts which rapidly change the wind turbine output do not significantly influence fuel consumption.

  19. Power-law relationships for estimating mass, fuel consumption and costs of energy conversion equipments.

    PubMed

    Caduff, Marloes; Huijbregts, Mark A J; Althaus, Hans-Joerg; Hendriks, A Jan

    2011-01-15

    To perform life-cycle assessment studies, data on the production and use of the products is required. However, often only few data or measurements are available. Estimation of properties can be performed by applying scaling relationships. In many disciplines, they are used to either predict data or to search for underlying patterns, but they have not been considered in the context of product assessments hitherto. The goal of this study was to explore size scaling for commonly used energy conversion equipment, that is, boilers, engines, and generators. The variables mass M, fuel consumption Q, and costs C were related to power P. The established power-law relationships were M = 10(0.73.. 1.89)P(0.64.. 1.23) (R(2) ≥ 0.94), Q = 10(0.06.. 0.68)P(0.82.. 1.02) (R(2) ≥ 0.98) and C = 10(2.46.. 2.86)P(0.83.. 0.85) (R(2) ≥ 0.83). Mass versus power and costs versus power showed that none of the equipment types scaled isometrically, that is, with a slope of 1. Fuel consumption versus power scaled approximately isometrically for steam boilers, the other equipments scaled significantly lower than 1. This nonlinear scaling behavior induces a significant size effect. The power laws we established can be applied to scale the mass, fuel consumption and costs of energy conversion equipments up or down. Our findings suggest that empirical scaling laws can be used to estimate properties, particularly relevant in studies focusing on early product development for which generally only little information is available.

  20. Carbon emission intensity of power consumption in India: A detailed study of its indicators

    SciTech Connect

    Nag, B.; Kulshreshtha, M.

    2000-03-01

    This paper analyzes the trends and components of carbon emission intensity of power consumption in India by economic activity for the period 1974--1994 using the Divisia decomposition to quantify the relative influences of its three major indicators, viz., emission coefficient of power, electricity intensity, and structural shift. The authors further analyze the causes for the variations of emission coefficient for power consumption by deriving the relative influences of fuel mix, fuel intensity, and generation mix on emission coefficient and hence carbon intensity. The study explicitly accounts for fuel quality variations, generation, and transmission and distribution (T and D) losses and auxiliary consumption variations. Results show major increases in both emission intensity and emission coefficient during the 1980s. The authors find electricity intensity to be the major contributing factor behind the 40% emission intensity rise during this period. The emission coefficient increased by 13% during this period, the major contributing factor being generation mix effects, which increased by 27.6%, offsetting the effect of fuel quality, whose index declined by 10%.

  1. Flexible low-power-consumption OLED displays for a universal communication device

    NASA Astrophysics Data System (ADS)

    Hack, Michael G.; Chwang, Anna B.; Lu, Min-Hao M.; Kwong, Raymond C.; Weaver, Michael S.; Tung, Yeh-Jiun; Brown, Julie J.

    2003-09-01

    In this paper we will outline the technical challenges and progress towards enabling a novel communication device based on a roll-out, low power consumption, OLED display. Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. We believe that phosphorescent OLED (PHOLED) technology fabricated on a truly flexible substrate, enables a mobile Universal Communication Device (UCD) to offer a high information content display in an extendable form, while rolling up into a small form factor when not in use. This communication device is of great interest for a range of both consumer and military applications. From the display perspective, the key component is achieving a long-lived, low power consumption display. We believe the OLEDs are the preferred display media, and in this talk we will outline our flexible phosphorescent OLED technology. The key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing. UDC has been developing long-lived flexible OLED (FOLED) displays based on plastic substrates and multi-layer monolithic encapsulation. Recent progress in this area will also be reported. Finally, we will outline the backplane requirements for flexible OLED displays and compare the various technology options that can be used to fabricate the UCD.

  2. Reducing power consumption while synchronizing a plurality of compute nodes during execution of a parallel application

    DOEpatents

    Archer, Charles J [Rochester, MN; Blocksome, Michael A [Rochester, MN; Peters, Amanda E [Cambridge, MA; Ratterman, Joseph D [Rochester, MN; Smith, Brian E [Rochester, MN

    2012-04-17

    Methods, apparatus, and products are disclosed for reducing power consumption while synchronizing a plurality of compute nodes during execution of a parallel application that include: beginning, by each compute node, performance of a blocking operation specified by the parallel application, each compute node beginning the blocking operation asynchronously with respect to the other compute nodes; reducing, for each compute node, power to one or more hardware components of that compute node in response to that compute node beginning the performance of the blocking operation; and restoring, for each compute node, the power to the hardware components having power reduced in response to all of the compute nodes beginning the performance of the blocking operation.

  3. Reducing power consumption while synchronizing a plurality of compute nodes during execution of a parallel application

    DOEpatents

    Archer, Charles J [Rochester, MN; Blocksome, Michael A [Rochester, MN; Peters, Amanda A [Rochester, MN; Ratterman, Joseph D [Rochester, MN; Smith, Brian E [Rochester, MN

    2012-01-10

    Methods, apparatus, and products are disclosed for reducing power consumption while synchronizing a plurality of compute nodes during execution of a parallel application that include: beginning, by each compute node, performance of a blocking operation specified by the parallel application, each compute node beginning the blocking operation asynchronously with respect to the other compute nodes; reducing, for each compute node, power to one or more hardware components of that compute node in response to that compute node beginning the performance of the blocking operation; and restoring, for each compute node, the power to the hardware components having power reduced in response to all of the compute nodes beginning the performance of the blocking operation.

  4. Microwatt power consumption maximum power point tracking circuit using an analogue differentiator for piezoelectric energy harvesting

    NASA Astrophysics Data System (ADS)

    Chew, Z. J.; Zhu, M.

    2015-12-01

    A maximum power point tracking (MPPT) scheme by tracking the open-circuit voltage from a piezoelectric energy harvester using a differentiator is presented in this paper. The MPPT controller is implemented by using a low-power analogue differentiator and comparators without the need of a sensing circuitry and a power hungry controller. This proposed MPPT circuit is used to control a buck converter which serves as a power management module in conjunction with a full-wave bridge diode rectifier. Performance of this MPPT control scheme is verified by using the prototyped circuit to track the maximum power point of a macro-fiber composite (MFC) as the piezoelectric energy harvester. The MFC was bonded on a composite material and the whole specimen was subjected to various strain levels at frequency from 10 to 100 Hz. Experimental results showed that the implemented full analogue MPPT controller has a tracking efficiency between 81% and 98.66% independent of the load, and consumes an average power of 3.187 μW at 3 V during operation.

  5. Development of a protocol to optimize electric power consumption and life cycle environmental impacts for operation of wastewater treatment plant.

    PubMed

    Piao, Wenhua; Kim, Changwon; Cho, Sunja; Kim, Hyosoo; Kim, Minsoo; Kim, Yejin

    2016-12-01

    In wastewater treatment plants (WWTPs), the portion of operating costs related to electric power consumption is increasing. If the electric power consumption decreased, however, it would be difficult to comply with the effluent water quality requirements. A protocol was proposed to minimize the environmental impacts as well as to optimize the electric power consumption under the conditions needed to meet the effluent water quality standards in this study. This protocol was comprised of six phases of procedure and was tested using operating data from S-WWTP to prove its applicability. The 11 major operating variables were categorized into three groups using principal component analysis and K-mean cluster analysis. Life cycle assessment (LCA) was conducted for each group to deduce the optimal operating conditions for each operating state. Then, employing mathematical modeling, six improvement plans to reduce electric power consumption were deduced. The electric power consumptions for suggested plans were estimated using an artificial neural network. This was followed by a second round of LCA conducted on the plans. As a result, a set of optimized improvement plans were derived for each group that were able to optimize the electric power consumption and life cycle environmental impact, at the same time. Based on these test results, the WWTP operating management protocol presented in this study is deemed able to suggest optimal operating conditions under which power consumption can be optimized with minimal life cycle environmental impact, while allowing the plant to meet water quality requirements.

  6. Analyzing the Energy and Power Consumption of Remote Memory Accesses in the OpenSHMEM Model

    SciTech Connect

    Jana, Siddhartha; Hernandez, Oscar R; Poole, Stephen W; Hsu, Chung-Hsing; Chapman, Barbara

    2014-01-01

    PGAS models like OpenSHMEM provide interfaces to explicitly initiate one-sided remote memory accesses among processes. In addition, the model also provides synchronizing barriers to ensure a consistent view of the distributed memory at different phases of an application. The incorrect use of such interfaces affects the scalability achievable while using a parallel programming model. This study aims at understanding the effects of these constructs on the energy and power consumption behavior of OpenSHMEM applications. Our experiments show that cost incurred in terms of the total energy and power consumed depends on multiple factors across the software and hardware stack. We conclude that there is a significant impact on the power consumed by the CPU and DRAM due to multiple factors including the design of the data transfer patterns within an application, the design of the communication protocols within a middleware, the architectural constraints laid by the interconnect solutions, and also the levels of memory hierarchy within a compute node. This work motivates treating energy and power consumption as important factors while designing compute solutions for current and future distributed systems.

  7. Reducing water freshwater consumption at coal-fired power plants : approaches used outside the United States.

    SciTech Connect

    Elcock, D.

    2011-05-09

    Coal-fired power plants consume huge quantities of water, and in some water-stressed areas, power plants compete with other users for limited supplies. Extensive use of coal to generate electricity is projected to continue for many years. Faced with increasing power demands and questionable future supplies, industries and governments are seeking ways to reduce freshwater consumption at coal-fired power plants. As the United States investigates various freshwater savings approaches (e.g., the use of alternative water sources), other countries are also researching and implementing approaches to address similar - and in many cases, more challenging - water supply and demand issues. Information about these non-U.S. approaches can be used to help direct near- and mid-term water-consumption research and development (R&D) activities in the United States. This report summarizes the research, development, and deployment (RD&D) status of several approaches used for reducing freshwater consumption by coal-fired power plants in other countries, many of which could be applied, or applied more aggressively, at coal-fired power plants in the United States. Information contained in this report is derived from literature and Internet searches, in some cases supplemented by communication with the researchers, authors, or equipment providers. Because there are few technical, peer-reviewed articles on this topic, much of the information in this report comes from the trade press and other non-peer-reviewed references. Reducing freshwater consumption at coal-fired power plants can occur directly or indirectly. Direct approaches are aimed specifically at reducing water consumption, and they include dry cooling, dry bottom ash handling, low-water-consuming emissions-control technologies, water metering and monitoring, reclaiming water from in-plant operations (e.g., recovery of cooling tower water for boiler makeup water, reclaiming water from flue gas desulfurization [FGD] systems), and

  8. How hybrid-electric vehicles are different from conventional vehicles: the effect of weight and power on fuel consumption

    NASA Astrophysics Data System (ADS)

    Reynolds, C.; Kandlikar, M.

    2007-01-01

    An increasingly diverse set of hybrid-electric vehicles (HEVs) is now available in North America. The recent generation of HEVs have higher fuel consumption, are heavier, and are significantly more powerful than the first generation of HEVs. We compare HEVs for sale in the United States in 2007 to equivalent conventional vehicles and determine how vehicle weight and system power affects fuel consumption within each vehicle set. We find that heavier and more powerful hybrid-electric vehicles are eroding the fuel consumption benefit of this technology. Nonetheless, the weight penalty for fuel consumption in HEVs is significantly lower than in equivalent conventional internal combustion engine vehicles (ICEVs). A 100 kg change in vehicle weight increases fuel consumption by 0.7 l/100 km in ICEVs compared with 0.4 l/100 km in HEVs. When the HEVs are compared with their ICEV counterparts in an equivalence model that differentiates between cars and sports-utility vehicles, the average fuel consumption benefit was 2.7 l/100 km. This analysis further reveals that a HEV which is 100 kg heavier than an identical ICEV would have a fuel consumption penalty of 0.15 l/100 km. Likewise, an increase in the HEV's power by 10 kW results in a fuel consumption penalty of 0.27 l/100 km.

  9. Progress Toward Accurate Measurements of Power Consumptions of DBD Plasma Actuators

    NASA Technical Reports Server (NTRS)

    Ashpis, David E.; Laun, Matthew C.; Griebeler, Elmer L.

    2012-01-01

    The accurate measurement of power consumption by Dielectric Barrier Discharge (DBD) plasma actuators is a challenge due to the characteristics of the actuator current signal. Micro-discharges generate high-amplitude, high-frequency current spike transients superimposed on a low-amplitude, low-frequency current. We have used a high-speed digital oscilloscope to measure the actuator power consumption using the Shunt Resistor method and the Monitor Capacitor method. The measurements were performed simultaneously and compared to each other in a time-accurate manner. It was found that low signal-to-noise ratios of the oscilloscopes used, in combination with the high dynamic range of the current spikes, make the Shunt Resistor method inaccurate. An innovative, nonlinear signal compression circuit was applied to the actuator current signal and yielded excellent agreement between the two methods. The paper describes the issues and challenges associated with performing accurate power measurements. It provides insights into the two methods including new insight into the Lissajous curve of the Monitor Capacitor method. Extension to a broad range of parameters and further development of the compression hardware will be performed in future work.

  10. Reducing pump power consumption by 40% (1000 kw) through improved pump management in a central plant

    SciTech Connect

    Deng, S.; Liu, M.; Turner, D.

    1998-07-01

    Chilled water system data collection and field measurements performed at the Central Utility Plant of Texas A and M University (TAMU) in College Station, Texas revealed that 30--50 % of the primary pump head is consumed by manual and automatic valves being operated in a partially-opened condition. A comprehensive analysis was performed to develop an improved pump management schedule. The results show potential savings of up to 40% of the pump power consumption without any capital investment. The optimized schedule is being implemented. This paper describes the method and presents results of the analysis and implementation.

  11. Low power consumption resistance random access memory with Pt/InOx/TiN structure

    NASA Astrophysics Data System (ADS)

    Yang, Jyun-Bao; Chang, Ting-Chang; Huang, Jheng-Jie; Chen, Yu-Ting; Tseng, Hsueh-Chih; Chu, Ann-Kuo; Sze, Simon M.; Tsai, Ming-Jinn

    2013-09-01

    In this study, the resistance switching characteristics of a resistive random access memory device with Pt/InOx/TiN structure is investigated. Unstable bipolar switching behavior is observed during the initial switching cycle, which then stabilizes after several switching cycles. Analyses indicate that the current conduction mechanism in the resistance state is dominated by Ohmic conduction. The decrease in electrical conductance can be attributed to the reduction of the cross-sectional area of the conduction path. Furthermore, the device exhibits low operation voltage and power consumption.

  12. Very Low-Power Consumption Analog Pulse Processing ASIC for Semiconductor Radiation Detectors

    SciTech Connect

    Wessendorf, K.O.; Lund, J.C.; Brunett, B.A.; Laguna, G.R.; Clements, J.W.

    1999-08-23

    We describe a very-low power consumption circuit for processing the pulses from a semiconductor radiation detector. The circuit was designed for use with a cadmium zinc telluride (CZT) detector for unattended monitoring of stored nuclear materials. The device is intended to be battery powered and operate at low duty-cycles over a long period of time. This system will provide adequate performance for medium resolution gamma-ray pulse-height spectroscopy applications. The circuit incorporates the functions of a charge sensitive preamplifier, shaping amplifier, and peak sample and hold circuit. An application specific integrated circuit (ASIC) version of the design has been designed, built and tested. With the exception of the input field effect transistor (FET), the circuit is constructed using bipolar components. In this paper the design philosophy and measured performance characteristics of the circuit are described.

  13. FUEL CONSUMPTION AND COST SAVINGS OF CLASS 8 HEAVY-DUTY TRUCKS POWERED BY NATURAL GAS

    SciTech Connect

    Gao, Zhiming; LaClair, Tim J; Daw, C Stuart; Smith, David E

    2013-01-01

    We compare the fuel consumption and greenhouse gas emissions of natural gas and diesel heavy-duty (HD) class 8 trucks under consistent simulated drive cycle conditions. Our study included both conventional and hybrid HD trucks operating with either natural gas or diesel engines, and we compare the resulting simulated fuel efficiencies, fuel costs, and payback periods. While trucks powered by natural gas engines have lower fuel economy, their CO2 emissions and costs are lower than comparable diesel trucks. Both diesel and natural gas powered hybrid trucks have significantly improved fuel economy, reasonable cost savings and payback time, and lower CO2 emissions under city driving conditions. However, under freeway-dominant driving conditions, the overall benefits of hybridization are considerably less. Based on payback period alone, non-hybrid natural gas trucks appear to be the most economic option for both urban and freeway driving environments.

  14. 650-nm 1 × 2 polymeric thermo-optic switch with low power consumption.

    PubMed

    Wang, Xi-Bin; Sun, Jian; Liu, Yu-Fen; Sun, Jing-Wen; Chen, Chang-Ming; Sun, Xiao-Qiang; Wang, Fei; Zhang, Da-Ming

    2014-05-05

    In this paper, a low-power 1 × 2 polymeric thermo-optic switch operating at the polymer optical fiber low-loss window of 650 nm was studied. The characteristic parameters of the switch were carefully designed and simulated. The fabrication was done by using standard semiconductor fabrication techniques such as spin-coating, photolithography, and dry etching. The device was fabricated based on poly(methyl methacrylate) (PMMA)-based materials with the Mach-Zehnder interferometer (MZI) structure. The device shows an extinction ratio of over 23.4 dB at 650 nm with a very low-power consumption of 5.3 mW. The measured switching rise time and fall time are 464.4 and 448.0 µs, respectively.

  15. Differences in oxygen consumption and external power between male and female speed skaters during supramaximal cycling.

    PubMed

    van Ingen Schenau, G J; de Groot, G

    1983-01-01

    Differences in performance levels between elite male and female endurance athletes are often explained by differences found in VO2 max even when expressed in VO2 max per kilogram lean body mass (VO2/LBM). Such an explanation is only a matter of course when less or no difference exists in mechanical efficiency, anaerobic power and technical variables like friction constants between males and females. Particularly during supramaximal exercises. In this study five elite male speed skaters were compared with five elite female speed skaters with respect to oxygen consumption and external power during a 3 min supramaximal bicycle ergometer test. The training background and training history of both groups were comparable. Although the elite males showed a 20% higher VO2/BW and 8% higher VO2/LBM (71.0 versus 65.01 x min-1 . kg-1) than the females, the female group showed the same mean external power Pc per kilogram body weight, and a surprising 12% higher Pc/LBM than the males (6.47 versus 5.79 W x kg-1). Hence the female group delivered 22% more external power per liter of oxygen consumption. With the help of additional data from 14 male and 11 female sub-elite skaters it is shown that the differences between the elite groups are mainly due to sex differences. In the light of differences between men and women reported in other studies, it seems likely that the differences found in this study are due to a difference in mechanical efficiency which particularly occurs in supramaximal tasks.(ABSTRACT TRUNCATED AT 250 WORDS)

  16. Chip Scale Atomic Resonator Frequency Stabilization System With Ultra-Low Power Consumption for Optoelectronic Oscillators.

    PubMed

    Zhao, Jianye; Zhang, Yaolin; Lu, Haoyuan; Hou, Dong; Zhang, Shuangyou; Wang, Zhong

    2016-07-01

    We present a long-term chip scale stabilization scheme for optoelectronic oscillators (OEOs) based on a rubidium coherent population trapping (CPT) atomic resonator. By locking a single mode of an OEO to the (85)Rb 3.035-GHz CPT resonance utilizing an improved phase-locked loop (PLL) with a PID regulator, we achieved a chip scale frequency stabilization system for the OEO. The fractional frequency stability of the stabilized OEO by overlapping Allan deviation reaches 6.2 ×10(-11) (1 s) and  ∼ 1.45 ×10 (-11) (1000 s). This scheme avoids a decrease in the extra phase noise performance induced by the electronic connection between the OEO and the microwave reference in common injection locking schemes. The total physical package of the stabilization system is [Formula: see text] and the total power consumption is 400 mW, which provides a chip scale and portable frequency stabilization approach with ultra-low power consumption for OEOs.

  17. Low-power consumption seamless wireless and wired links using transparent waveform transfer

    NASA Astrophysics Data System (ADS)

    Kawanishi, Tetsuya

    2014-12-01

    This paper describes wired and wireless seamless networks consisting of radiowave and optical fiber links. Digital coherent technology developed for high-speed optical fiber transmission can mitigate signal deformation in radiowave links in the air as well as in optical fibers. Radio-over-fiber (RoF) technique, which transmits radio waveforms on intensity envelops of optical signals, can provide direct waveform transfer between optical and radio signals by using optical-to-electric or electric-to-optical conversion devices. Combination of RoF in millimeter-wave bands and digital coherent with high-performance digital signal processing (DSP) can provide wired and wireless seamless links where bit rate of wireless links would be close to 100 Gb/s. Millimeter-wave transmission distance would be shorter than a few kilometers due to large atmospheric attenuation, so that many moderate distance wireless links, which are seamlessly connected to optical fiber networks should be required to provide high-speed mobile-capable networks. In such systems, reduction of power consumption at media converters connecting wired and wireless links would be very important to pursue both low-power consumption and large capacity.

  18. Effect of heating strategy on power consumption and performance of a pilot plant anaerobic digester.

    PubMed

    Espinosa-Solares, Teodoro; Valle-Guadarrama, Salvador; Bombardiere, John; Domaschko, Max; Easter, Michael

    2009-05-01

    The effect of heating strategy on power consumption and performance of a pilot plant anaerobic digester treating chicken litter, under thermophilic conditions, has been studied. Heating strategy was evaluated using three different spans (0.2 degrees C, 0.6 degrees C, and 1.0 degree C) for triggering the temperature control system from target temperature (56.7 degrees C). The hydraulic retention time in the pilot plant digester was in the range of 32 to 37 days, varying the total solids concentration fed from 5% to 6%. The results showed that under the experimental conditions, heating was the most energy-demanding process with 95.5% of the energy used. Increments up to 7.5% and 3.8%, respectively, on mechanical and heating power consumption, were observed as the span, for triggering the temperature control system from target temperature, was increased. Under the experimental conditions studied here, an increment of 30.6% on the global biodigester performance index was observed when a span of 1.0 degree C was compared to the one of 0.2 degrees C.

  19. Review of Millimeter-Wave Integrated Circuits With Low Power Consumption for High Speed Wireless Communications

    NASA Astrophysics Data System (ADS)

    Ellinger, Frank; Fritsche, David; Tretter, Gregor; Leufker, Jan Dirk; Yodprasit, Uroschanit; Carta, C.

    2017-01-01

    In this paper we review high-speed radio-frequency integrated circuits operating up to 210 GHz and present selected state-of-the-art circuits with leading-edge performance, which we have designed at our chair. The following components are discussed employing bipolar complementary metal oxide semiconductors (BiCMOS) technologies: a 200 GHz amplifier with 17 dB gain and around 9 dB noise figure consuming only 18 mW, a 200 GHz down mixer with 5.5 dB conversion gain and 40 mW power consumption, a 190 GHz receiver with 47 dB conversion gain and 11 dB noise figure and a 60 GHz power amplifier with 24.5 dBm output power and 12.9 % power added efficiency (PAE). Moreover, we report on a single-core flash CMOS analogue-to-digital converter (ADC) with 3 bit resolution and a speed of 24 GS/s. Finally, we discuss a 60 GHz on-off keying (OOK) BiCMOS transceiver chip set. The wireless transmission of data with 5 Gb/s at 42 cm distance between transmitter and receiver was verified by experiments. The complete transceiver consumes 396 mW.

  20. Adding simultaneous stimulating channels to reduce power consumption in cochlear implants.

    PubMed

    Langner, Florian; Saoji, Aniket A; Büchner, Andreas; Nogueira, Waldo

    2017-03-01

    Sound coding strategies for Cochlear Implant (CI) listeners can be used to control the trade-off between speech performance and power consumption. Most commercial CI strategies use non-simultaneous channel stimulation, stimulating only one electrode at a time. One could add parallel simultaneous stimulating channels such that the electrical interaction between channels is increased. This would produce spectral smearing, because the electrical fields of the simultaneous stimulated channels interact, but also power savings. The parallel channels produce a louder sensation than sequential stimulation. To test this hypothesis we implemented different sound coding strategies using a research interface from Advanced Bionics: the commercial F120 strategy using sequential channel stimulation (one channel equals two electrodes with current steering) and the Paired strategy, consisting of simultaneous stimulation with two channels. Here, the electrical field of both channels will interact, requiring less current on each channel to perceive the same loudness as with F120. However, channel interaction between the independent channels may reduce speech recognition or understanding. This can be diminished by adding an inverse-polarity stimulation channel between both channels. This strategy is termed Paired with Flanks. Additionally, Triplet with three channels and an adjacent Flank style was investigated. For each strategy we measured speech intelligibility with the Hochmair-Schulz-Moser sentence test. Spectral resolution was assessed using a spectral modulation depth detection task. Results show that Paired without Flanks obtains similar performance while reducing the current by 20% on average compared to F120. Triplet with and without Flanks shows overall poorer performance when compared to F120. All strategies inhibit the option to increase the pulse width which would result in even further decreased power consumption.

  1. Novel Self-Heated Gas Sensors Using on-Chip Networked Nanowires with Ultralow Power Consumption.

    PubMed

    Tan, Ha Minh; Manh Hung, Chu; Ngoc, Trinh Minh; Nguyen, Hugo; Duc Hoa, Nguyen; Van Duy, Nguyen; Hieu, Nguyen Van

    2017-02-22

    The length of single crystalline nanowires (NWs) offers a perfect pathway for electron transfer, while the small diameter of the NWs hampers thermal losses to tje environment, substrate, and metal electrodes. Therefore, Joule self-heating effect is nearly ideal for operating NW gas sensors at ultralow power consumption, without additional heaters. The realization of the self-heated NW sensors using the "pick and place" approach is complex, hardly reproducible, low yield, and not applicable for mass production. Here, we present the sensing capability of the self-heated networked SnO2 NWs effectively prepared by on-chip growth. Our developed self-heated sensors exhibit a good response of 25.6 to 2.5 ppm NO2 gas, while the response to 500 ppm H2, 100 ppm NH3, 100 ppm H2S, and 500 ppm C2H5OH is very low, indicating the good selectivity of the sensors to NO2 gas. Furthermore, the detection limit is very low, down to 82 parts-per-trillion. As-obtained sensing performance under self-heating mode is nearly identical to that under external heating mode. While the power consumption under self-heating mode is extremely low, around hundreds of microwatts, as scaled-down the size of the electrode is below 10 μm. The selectivity of the sensors can be controlled simply by tuning the loading power that enables simple detection of NO2 in mixed gases. Remarkable performance together with a significantly facile fabrication process of the present sensors enhances the potential application of NW sensors in next generation technologies such as electronic noses, the Internet of Things, and smartphone sensing.

  2. Potential nanotechnology applications for reducing freshwater consumption at coal fired power plants : an early view.

    SciTech Connect

    Elcock, D.

    2010-09-17

    This report was funded by the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL) Existing Plants Research Program, which has an energy-water research effort that focuses on water use at power plants. This study complements the overall research effort of the Existing Plants Research Program by evaluating water issues that could impact power plants. A growing challenge to the economic production of electricity from coal-fired power plants is the demand for freshwater, particularly in light of the projected trends for increasing demands and decreasing supplies of freshwater. Nanotechnology uses the unique chemical, physical, and biological properties that are associated with materials at the nanoscale to create and use materials, devices, and systems with new functions and properties. It is possible that nanotechnology may open the door to a variety of potentially interesting ways to reduce freshwater consumption at power plants. This report provides an overview of how applications of nanotechnology could potentially help reduce freshwater use at coal-fired power plants. It was developed by (1) identifying areas within a coal-fired power plant's operations where freshwater use occurs and could possibly be reduced, (2) conducting a literature review to identify potential applications of nanotechnology for facilitating such reductions, and (3) collecting additional information on potential applications from researchers and companies to clarify or expand on information obtained from the literature. Opportunities, areas, and processes for reducing freshwater use in coal-fired power plants considered in this report include the use of nontraditional waters in process and cooling water systems, carbon capture alternatives, more efficient processes for removing sulfur dioxide and nitrogen oxides, coolants that have higher thermal conductivities than water alone, energy storage options, and a variety of plant inefficiencies, which, if improved

  3. Super low power consumption middle infrared LED-PD optopairs for chemical sensing

    NASA Astrophysics Data System (ADS)

    Stoyanov, Nikolay D.; Salikhov, Khafiz M.; Kalinina, Karina V.; Kizhaev, Sergey S.; Chernyaev, Anton V.

    2014-03-01

    The new photodiodes with cut-off wavelengths at 3640 nm, 4600 nm and 5150 nm have been recently developed in a high-tech company LED Microsensor NT (St.Petersburg, Russia) in cooperation with Aalto University (Espoo, Finland). Photodiode (PD) heterostructures InAsSb/InAsSbP were grown by MOVPE on InAs substrates. For the PDs with a cutoff wavelength at 3640 nm at room temperature the responsivity at 3300 nm reached 1.46 A/W and, detectivity was 1.56*1010 cm.Hz1/2/W. For the PDs with a cut-off 4600 nm the same parameters were: 1.91 A/W and 6.7*109 cm.Hz1/2/W respectively (lambda=4100 nm). For the third type of PDs with a cut-off at 5150 nm responsivity was 0.29 A/W, detectivity was 4.2*108 cm.Hz1/2/W (lambda=5000 nm). Creation of photodiodes for the spectral range 2500-5200 nm with acceptable efficiency in photovoltaic operation mode (with no reverse bias) and using them in a pair with spectrally matched LEDs driven by very short current pulses allows developing optical cells with very low power consumption (less than 1 mW). Small size of the LED and PD dies (0.4-0.8 mm) and low heating makes it possible to design very thin optical cells (less than 2 mm) for measuring CH4, CO2, CO, H2O and other substances [1]. Mounting of a few LED dies that emit at different wavelengths in such a small cell allows measuring different chemical substances simultaneously. Direct coating of optical filters on the LED or PD surface during post-growth process allows improving selectivity and sensitivity of the sensor. Super low power consumption of the diode-based optical cells makes them promising candidates for the wireless mesh sensor networks for various gas monitoring purposes as well as for HVAC systems. Combination of the low power consumption and thin size of the cells opens possibility to embed them in mobile devices.

  4. Local muscle oxygen consumption related to external and joint specific power.

    PubMed

    Skovereng, Knut; Ettema, Gertjan; van Beekvelt, Mireille

    2016-02-01

    The purpose of the present study was to examine the effects of external work rate on joint specific power and the relationship between knee extension power and vastus lateralis muscle oxygen consumption (mVO2). We measured kinematics and pedal forces and used inverse dynamics to calculate joint power for the hip, knee and ankle joints during an incremental cycling protocol performed by 21 recreational cyclists. Vastus lateralis mVO2 was estimated using near-infrared spectroscopy with an arterial occlusion. The main finding was a non-linear relationship between vastus lateralis mVO2 and external work rate that was characterised by an increase followed by a tendency for a levelling off (R(2)=0.99 and 0.94 for the quadratic and linear models respectively, p<0.05). When comparing 100W and 225W, there was a ∼43W increase in knee extension but still a ∼9% decrease in relative contribution of knee extension to external work rate resulting from a ∼47W increase in hip extension. When vastus lateralis mVO2 was related to knee extension power, the relationship was still non-linear (R(2)=0.99 and 0.97 for the quadratic and linear models respectively, p<0.05). These results demonstrate a non-linear response in mVO2 relative to a change in external work rate. Relating vastus lateralis mVO2 to knee extension power showed a better fit to a linear equation compared to external work rate, but it is not a straight line.

  5. Internationally recognized guidelines for ‘sensible’ alcohol consumption: is exceeding them actually detrimental to health and social circumstances? Evidence from a population-based cohort study

    PubMed Central

    Batty, G. David; Lewars, Heather; Emslie, Carol; Gale, Catharine R.; Hunt, Kate

    2009-01-01

    Background The health and social impact of drinking in excess of internationally recognized weekly (>21 units in men; >14 units in women) and daily (>4 units in men; >3 units in women) recommendations for ‘sensible’ alcohol intake are largely unknown. Methods A prospective cohort study of 1551 men and women aged around 55 years in 1988 when typical alcohol consumption was recalled using a 7-day grid. An average of 3.4 years later (1990/92), study participants were re-surveyed (n = 1259; 84.7% of the target population) when they responded to nurse-administered enquiries regarding minor psychiatric morbidity, self-perceived health, hypertension, accidents, overweight/obesity and financial difficulties. Study members were followed up for mortality experience over 18 years. Results In fully adjusted analyses, surpassing guidelines for sensible alcohol intake was associated with an increased risk of hypertension [daily guidelines only: P-value(trend): 0.012], financial problems [weekly guidelines: P-value(difference): 0.046] and, to a lesser degree, accidents [weekly guidelines: P-value(difference): 0.065]. There was no association between either indicator of alcohol intake and mortality risk. Conclusions In the present study, there was some evidence for a detrimental effect on health and social circumstances of exceeding current internationally recognized weekly and daily guidelines for alcohol intake. PMID:19574275

  6. Design optimizations of phase noise, power consumption and frequency tuning for VCO

    NASA Astrophysics Data System (ADS)

    Nan, Chen; Shengxi, Diao; Lu, Huang; Xuefei, Bai; Fujiang, Lin

    2013-09-01

    To meet the requirements of the low power Zigbee system, VCO design optimizations of phase noise, power consumption and frequency tuning are discussed in this paper. Both flicker noise of tail bias transistors and up-conversion of flicker noise from cross-coupled pair are reduced by improved self-switched biasing technology, leading to low close-in phase noise. Low power is achieved by low supply voltage and triode region biasing. To linearly tune the frequency and get constant gain, distributed varactor structure is adopted. The proposed VCO is fabricated in SMIC 0.18-μm CMOS process. The measured linear tuning range is from 2.38 to 2.61 GHz. The oscillator exhibits low phase noise of -77.5 dBc/Hz and -122.8 dBc/Hz at 10 kHz and 1 MHz offset, respectively, at 2.55 GHz oscillation frequency while dissipating 2.7 mA from 1.2 V supply voltage, which well meet design specifications.

  7. Low Power Consumption Digital Clock Recovery Circuit Based on Threshold Crossing

    NASA Astrophysics Data System (ADS)

    Perić, Dragana; Perić, Miroslav

    2016-12-01

    In this paper a new structure of digital clock recovery — DCR circuit is presented. The main features of this DCR are: low complexity design, low power consumption and a single system clock operation. Thus, multiple instantiation of this type of DCR on a single chip is not complex. Due to this, such DCR can target application in energy-efficient cognitive radio systems with carrier aggregation. For performance evaluation, we have derived Markov chain based mathematical model for peak-to-peak and root mean square jitter performance analysis. The stability problem of this model, rising from the fact that some phase error states have several orders of magnitude lower probabilities than the others, is solved using mathematical apparatus for symbolic analysis. The mathematical model validity is examined by laboratorial measurements of proposed DCR for 4-PAM signal. The measurement methodology and results are described in details.

  8. Methods of reducing energy consumption of the oxidant supply system for MHD/steam power plants

    NASA Technical Reports Server (NTRS)

    Juhasz, A. J.

    1983-01-01

    An in-depth study was conducted to identify possible improvements to the oxidant supply system for combined cycle MHD power plants which would lead to higher thermal efficiency and reduction in the cost of electricity, COE. Results showed that the oxidant system energy consumption could be minimized when the process was designed to deliver a product O2 concentration of 70 mole percent. The study also led to the development of a new air separation process, referred to as liquid pumping and internal compression. MHD system performance calculations show that the new process would permit an increase in plant thermal efficiency of 0.6 percent while allowing more favorable tradeoffs between magnetic energy and oxidant system capacity requirements.

  9. System and method for controlling power consumption in a computer system based on user satisfaction

    DOEpatents

    Yang, Lei; Dick, Robert P; Chen, Xi; Memik, Gokhan; Dinda, Peter A; Shy, Alex; Ozisikyilmaz, Berkin; Mallik, Arindam; Choudhary, Alok

    2014-04-22

    Systems and methods for controlling power consumption in a computer system. For each of a plurality of interactive applications, the method changes a frequency at which a processor of the computer system runs, receives an indication of user satisfaction, determines a relationship between the changed frequency and the user satisfaction of the interactive application, and stores the determined relationship information. The determined relationship can distinguish between different users and different interactive applications. A frequency may be selected from the discrete frequencies at which the processor of the computer system runs based on the determined relationship information for a particular user and a particular interactive application running on the processor of the computer system. The processor may be adapted to run at the selected frequency.

  10. Methods of reducing energy consumption of the oxidant supply system for MHD/steam power plants

    NASA Technical Reports Server (NTRS)

    Juhasz, A. J.

    1983-01-01

    An in-depth study was conducted to identify possible improvements to the oxidant supply system for combined cycle MHD power plants which would lead to higher thermal efficiency and reduction in the cost of electricity, COE. Results showed that the oxidant system energy consumption could be minimized when the process was designed to deliver a product O2 concentration of 70 mole percent. The study also led to the development of a new air separation process, referred to as 'liquid pumping and internal compression'. MHD system performance calculations show that the new process would permit an increase in plant thermal efficiency of 0.6 percent while allowing more favorable tradeoffs between magnetic energy and oxidant system capacity requirements.

  11. A durable, non power consumptive, simple seal for rotary blood pumps.

    PubMed

    Mitamura, Y; Sekine, K; Asakawa, M; Yozu, R; Kawada, S; Okamoto, E

    2001-01-01

    One of the key technologic requirements for rotary blood pumps is the sealing of the motor shaft. A mechanical seal, a journal bearing, magnetic coupling, and magnetic suspension have been developed, but they have drawbacks such as wear, thrombus formation, and power consumption. A magnetic fluid seal was developed for an axial flow pump. A magnetic fluid seal is durable, simple, and non power consumptive. Long-term experiments and finite element modeling (FEM) analyses confirmed these advantages. The seal body was composed of a Ned-Fe magnet and two pole pieces; the seal was formed by injecting ferrofluid into the gap (50 microm) between the pole pieces and the motor shaft. To contain the ferrofluid in the seal and to minimize the possibility of ferrofluid making contact with blood, a shield with a small cavity was attached to the pole piece. While submerged in blood, the sealing pressure of the seal was measured and found to be 188 mm Hg with ferrofluid LS-40 (saturated magnetization, 24.3 kA/m) at a motor speed of 10,000 rpm and 225 mm Hg under static conditions. The magnetic fluid seals performed perfectly at a pressure of 100 mm Hg for 594 + days in a static condition, and 51, 39+, and 34+ days at a motor speed of 8,000 rpm. FEM analyses indicated a theoretical sealing pressure of 260 mm Hg. The state of the magnetic fluid in the seal in water was observed with a microscope. Neither splashing of magnetic fluid nor mixing of the magnetic fluid and water was observed. The specially designed magnetic fluid seal for keeping liquids out is useful for axial flow blood pumps. The magnetic fluid seal was incorporated into an intracardiac axial flow pump.

  12. Power consumption and byproducts in electron beam and electrical discharge processing of volatile organic compounds

    SciTech Connect

    Penetrante, B.M.; Hsiao, M.C.; Bardsley, J.N.

    1996-02-20

    Among the new methods being investigated for the post-process reduction of volatile organic compounds (VOCs) in atmospheric-pressure air streams are based on non-thermal plasmas. Electron beam, pulsed corona and dielectric-barrier discharge methods are among the more extensively investigated techniques for producing non-thermal plasmas. In order to apply non-thermal plasmas in an industrial scale, it is important to establish the electrical power requirements and byproducts of the process. In this paper the authors present experimental results using a compact electron beam reactor, a pulsed corona and a dielectric-barrier discharge reactor. They have used these reactors to study the removal of a wide variety of VOCs. The effects of background gas composition and gas temperature on the decomposition chemistry have been studied. They present a description of the reactions that control the efficiency of the plasma process. They have found that pulsed corona and other types of electrical discharge reactors are most suitable only for processes requiring O radicals. For VOCs requiring copious amounts of electrons, ions, N atoms or OH radicals, the use of electron beam reactors is generally the best way of minimizing the electrical power consumption. Electron beam processing is remarkably more effective for all of the VOCs tested. For control of VOC emissions from dilute, large volume sources such as paint spray booths, cost analysis shows that the electron beam method is cost-competitive to thermal and catalytic methods that employ heat recovery or hybrid techniques.

  13. Regrowth-free mid-infrared distributed feedback quantum cascade lasers with sub-watt power consumption

    NASA Astrophysics Data System (ADS)

    Briggs, Ryan M.; Frez, Clifford; Fradet, Mathieu; Forouhar, Siamak; Blanchard, Romain; Pflügl, Christian

    2016-03-01

    We report on room-temperature, continuous-wave operation of single-mode quantum cascade lasers designed for minimal threshold power consumption in the 4 to 10 μm spectral range. Narrow-ridge distributed feedback lasers were developed with plasma-etched sidewall corrugations and infrared-transparent dielectric cladding, enabling fabrication without any epitaxial steps beyond the initial growth of the planar laser wafer. The devices exhibit single-mode emission with stable, mode-hop-free tuning and side-mode suppression greater than 25 dB. We demonstrate packaged single-mode devices with continuous-wave threshold power consumption near 1 W above room temperature.

  14. Note: Ultra-high frequency ultra-low dc power consumption HEMT amplifier for quantum measurements in millikelvin temperature range

    NASA Astrophysics Data System (ADS)

    Korolev, A. M.; Shnyrkov, V. I.; Shulga, V. M.

    2011-01-01

    We have presented theory and experimentally demonstrated an efficient method for drastically reducing the power consumption of the rf/microwave amplifiers based on HEMT in unsaturated dc regime. Conceptual one-stage 10 dB-gain amplifier showed submicrowatt level of the power consumption (0.95 μW at frequency of 0.5 GHz) when cooled down to 300 mK. Proposed technique has a great potential to design the readout amplifiers for ultra-deep-cooled cryoelectronic quantum devices.

  15. Note: Ultra-high frequency ultra-low dc power consumption HEMT amplifier for quantum measurements in millikelvin temperature range.

    PubMed

    Korolev, A M; Shnyrkov, V I; Shulga, V M

    2011-01-01

    We have presented theory and experimentally demonstrated an efficient method for drastically reducing the power consumption of the rf/microwave amplifiers based on HEMT in unsaturated dc regime. Conceptual one-stage 10 dB-gain amplifier showed submicrowatt level of the power consumption (0.95 μW at frequency of 0.5 GHz) when cooled down to 300 mK. Proposed technique has a great potential to design the readout amplifiers for ultra-deep-cooled cryoelectronic quantum devices.

  16. SoftExplorer: Estimating and Optimizing the Power and Energy Consumption of a C Program for DSP Applications

    NASA Astrophysics Data System (ADS)

    Senn, Eric; Laurent, Johann; Julien, Nathalie; Martin, Eric

    2005-12-01

    We present a method to estimate the power and energy consumption of an algorithm directly from the C program. Three models are involved: a model for the targeted processor (the power model), a model for the algorithm, and a model for the compiler (the prediction model). A functional-level power analysis is performed to obtain the power model. Five power models have been developed so far, for different architectures, from the simple RISC ARM7 to the very complex VLIW DSP TI C64. Important phenomena are taken into account, like cache misses, pipeline stalls, and internal/external memory accesses. The model for the algorithm expresses the algorithm's influence over the processor's activity. The prediction model represents the behavior of the compiler, and how it will allow the algorithm to use the processor's resources. The data mapping is considered at that stage. We have developed a tool, SoftExplorer, which performs estimation both at the C-level and the assembly level. Estimations are performed on real-life digital signal processing applications with average errors of[InlineEquation not available: see fulltext.]% at the C-level and[InlineEquation not available: see fulltext.]% at the assembly level. We present how SoftExplorer can be used to optimize the consumption of an application. We first show how to find the best data mapping for an algorithm. Then we demonstrate a method to choose the processor and its operating frequency in order to minimize the global energy consumption.

  17. Optimal Self-Tuning PID Controller Based on Low Power Consumption for a Server Fan Cooling System.

    PubMed

    Lee, Chengming; Chen, Rongshun

    2015-05-20

    Recently, saving the cooling power in servers by controlling the fan speed has attracted considerable attention because of the increasing demand for high-density servers. This paper presents an optimal self-tuning proportional-integral-derivative (PID) controller, combining a PID neural network (PIDNN) with fan-power-based optimization in the transient-state temperature response in the time domain, for a server fan cooling system. Because the thermal model of the cooling system is nonlinear and complex, a server mockup system simulating a 1U rack server was constructed and a fan power model was created using a third-order nonlinear curve fit to determine the cooling power consumption by the fan speed control. PIDNN with a time domain criterion is used to tune all online and optimized PID gains. The proposed controller was validated through experiments of step response when the server operated from the low to high power state. The results show that up to 14% of a server's fan cooling power can be saved if the fan control permits a slight temperature response overshoot in the electronic components, which may provide a time-saving strategy for tuning the PID controller to control the server fan speed during low fan power consumption.

  18. Optimal Self-Tuning PID Controller Based on Low Power Consumption for a Server Fan Cooling System

    PubMed Central

    Lee, Chengming; Chen, Rongshun

    2015-01-01

    Recently, saving the cooling power in servers by controlling the fan speed has attracted considerable attention because of the increasing demand for high-density servers. This paper presents an optimal self-tuning proportional-integral-derivative (PID) controller, combining a PID neural network (PIDNN) with fan-power-based optimization in the transient-state temperature response in the time domain, for a server fan cooling system. Because the thermal model of the cooling system is nonlinear and complex, a server mockup system simulating a 1U rack server was constructed and a fan power model was created using a third-order nonlinear curve fit to determine the cooling power consumption by the fan speed control. PIDNN with a time domain criterion is used to tune all online and optimized PID gains. The proposed controller was validated through experiments of step response when the server operated from the low to high power state. The results show that up to 14% of a server’s fan cooling power can be saved if the fan control permits a slight temperature response overshoot in the electronic components, which may provide a time-saving strategy for tuning the PID controller to control the server fan speed during low fan power consumption. PMID:26007725

  19. Plasmonics-Based Multifunctional Electrodes for Low-Power-Consumption Compact Color-Image Sensors.

    PubMed

    Lin, Keng-Te; Chen, Hsuen-Li; Lai, Yu-Sheng; Chi, Yi-Min; Chu, Ting-Wei

    2016-03-01

    High pixel density, efficient color splitting, a compact structure, superior quantum efficiency, and low power consumption are all important features for contemporary color-image sensors. In this study, we developed a surface plasmonics-based color-image sensor displaying a high photoelectric response, a microlens-free structure, and a zero-bias working voltage. Our compact sensor comprised only (i) a multifunctional electrode based on a single-layer structured aluminum (Al) film and (ii) an underlying silicon (Si) substrate. This approach significantly simplifies the device structure and fabrication processes; for example, the red, green, and blue color pixels can be prepared simultaneously in a single lithography step. Moreover, such Schottky-based plasmonic electrodes perform multiple functions, including color splitting, optical-to-electrical signal conversion, and photogenerated carrier collection for color-image detection. Our multifunctional, electrode-based device could also avoid the interference phenomenon that degrades the color-splitting spectra found in conventional color-image sensors. Furthermore, the device took advantage of the near-field surface plasmonic effect around the Al-Si junction to enhance the optical absorption of Si, resulting in a significant photoelectric current output even under low-light surroundings and zero bias voltage. These plasmonic Schottky-based color-image devices could convert a photocurrent directly into a photovoltage and provided sufficient voltage output for color-image detection even under a light intensity of only several femtowatts per square micrometer. Unlike conventional color image devices, using voltage as the output signal decreases the area of the periphery read-out circuit because it does not require a current-to-voltage conversion capacitor or its related circuit. Therefore, this strategy has great potential for direct integration with complementary metal-oxide-semiconductor (CMOS)-compatible circuit

  20. Low-power-Consumption metal oxide NO2 gas sensor based on micro-heater and screen printing technology.

    PubMed

    Moon, S E; Lee, H K; Choi, N J; Lee, J; Yang, W S; Kim, J; Jong, J J; Yoo, D J

    2012-07-01

    An NO2 micro gas sensor was fabricated based on a micro-heater using tin oxide nano-powders for effective gas detection and monitoring system with low power consumption and high sensitivity. The processes of the fabrication were acceptable to the conventional CMOS processes for mass-production. Semiconducting SnO2 nano-powders were synthesized via the co-precipitation method; and to increase the sensitivity of the NO2 gas rare metal dopants were added. In the structure of the micro-heater, the resistances of two semi-circular Pt heaters were connected to the spreader for thermal uniformity. The resistance of each heater becomes an electrically equal Wheatstone-bridge, which was divided in half by the heat spreading structure. Based on the aforementioned design, a low-power-consumption micro-heater was fabricated using the CMOS-compatible MEMS processes. A bridge-type micro-heater based on the Si substrate was fabricated via surface micro-machining. The NO2 sensing properties of a screen-printed tin oxide thick film device were measured The micro gas sensors showed substantial sensitivity down to 0.5 ppm NO2 at a low power consumption (34.2 mW).

  1. Reduction in the Electric Power Consumption of a Thermoelectric Refrigerator by Experimental Optimization of the Temperature Controller

    NASA Astrophysics Data System (ADS)

    Martínez, A.; Astrain, D.; Rodríguez, A.; Pérez, G.

    2013-07-01

    Most thermoelectric refrigerators used for food conservation are operated by on/off temperature controllers, because of their simplicity and low cost. This type of controller poses a major problem: when the inner temperature reaches the lower setpoint and the thermoelectric modules are switched off, a great amount of the heat stored in the heat exchanger at the hot end of the modules goes back into the refrigerator, by heat conduction through the modules and the heat extender. This effect significantly increases the electric power consumption of the refrigerator. This work studies experimentally the influence of different temperature control systems on the electric power consumption and coefficient of performance of a thermoelectric refrigerator: an on/off controller, a proportional-integral-derivative controller, and a novel operating system based on idling voltages. The latter provides voltage to the modules once the inner temperature reaches the lower setpoint, instead of switching them off, preventing heat from going back. A prototype has been constructed to compare these operating systems. Results prove that the controller based on idling voltages reduces the electric power consumption of the refrigerator by 32% and increases the coefficient of performance by 64%, compared with the on/off controller.

  2. Computational fluid dynamics study on mixing mode and power consumption in anaerobic mono- and co-digestion.

    PubMed

    Zhang, Yuan; Yu, Guangren; Yu, Liang; Siddhu, Muhammad Abdul Hanan; Gao, Mengjiao; Abdeltawab, Ahmed A; Al-Deyab, Salem S; Chen, Xiaochun

    2016-03-01

    Computational fluid dynamics (CFD) was applied to investigate mixing mode and power consumption in anaerobic mono- and co-digestion. Cattle manure (CM) and corn stover (CS) were used as feedstock and stirred tank reactor (STR) was used as digester. Power numbers obtained by the CFD simulation were compared with those from the experimental correlation. Results showed that the standard k-ε model was more appropriate than other turbulence models. A new index, net power production instead of gas production, was proposed to optimize feedstock ratio for anaerobic co-digestion. Results showed that flow field and power consumption were significantly changed in co-digestion of CM and CS compared with those in mono-digestion of either CM or CS. For different mixing modes, the optimum feedstock ratio for co-digestion changed with net power production. The best option of CM/CS ratio for continuous mixing, intermittent mixing I, and intermittent mixing II were 1:1, 1:1 and 1:3, respectively.

  3. Withdrawal and consumption of water by thermoelectric power plants in the United States, 2010

    USGS Publications Warehouse

    Diehl, Timothy H.; Harris, Melissa A.

    2014-01-01

    An analysis of 2005 and 2010 EIA-reported water use indicated that withdrawal and consumption declined 18 percent and 34 percent, respectively. Alternative water types (types other than freshwater) accounted for approximately 25 percent of all withdrawals in 2010, most of which occurred at plants with once-through cooling systems using saline and brackish tidal waters. Differences among withdrawal and consumption coefficients based on EIA-reported water use for 2005 and 2010 and heat-budget model results for 2010 reveal opportunities for improving consistency and accuracy of reporting of water-use information at the plant scale.

  4. Using architecture information and real-time resource state to reduce power consumption and communication costs in parallel applications.

    SciTech Connect

    Brandt, James M.; Devine, Karen Dragon; Gentile, Ann C.; Leung, Vitus Joseph; Olivier, Stephen Lecler; Pedretti, Kevin; Rajamanickam, Sivasankaran; Bunde, David P.; Deveci, Mehmet; Catalyurek, Umit V.

    2014-09-01

    As computer systems grow in both size and complexity, the need for applications and run-time systems to adjust to their dynamic environment also grows. The goal of the RAAMP LDRD was to combine static architecture information and real-time system state with algorithms to conserve power, reduce communication costs, and avoid network contention. We devel- oped new data collection and aggregation tools to extract static hardware information (e.g., node/core hierarchy, network routing) as well as real-time performance data (e.g., CPU uti- lization, power consumption, memory bandwidth saturation, percentage of used bandwidth, number of network stalls). We created application interfaces that allowed this data to be used easily by algorithms. Finally, we demonstrated the benefit of integrating system and application information for two use cases. The first used real-time power consumption and memory bandwidth saturation data to throttle concurrency to save power without increasing application execution time. The second used static or real-time network traffic information to reduce or avoid network congestion by remapping MPI tasks to allocated processors. Results from our work are summarized in this report; more details are available in our publications [2, 6, 14, 16, 22, 29, 38, 44, 51, 54].

  5. Power to the Plug: An Introduction to Energy, Electricity, Consumption and Efficiency

    SciTech Connect

    DOE / EERE / NEED Project

    2011-06-07

    The NEED Project and the U.S. Department of Energy have collaborated to bring you this educational four-page guide to energy, electricity, consumption and efficiency. It includes, on the last page, a home energy survey to help you analyze your home energy use.

  6. A High Dynamic Range and Low Power Consumption Audio Delta-Sigma Modulator with Opamp Sharing Technique among Three Integrators

    NASA Astrophysics Data System (ADS)

    Kanemoto, Daisuke; Ido, Toru; Taniguchi, Kenji

    A low power and high performance with third order delta-sigma modulator for audio applications, fabricated in a 0.18µm CMOS process, is presented. The modulator utilizes a third order noise shaping with only one opamp by using an opamp sharing technique. The opamp sharing among three integrator stages is achieved through the optimal operation timing, which makes use of the load capacitance differences between the three integrator stages. The designed modulator achieves 101.1dB signal-to-noise ratio (A-weighted) and 101.5dB dynamic range (A-weighted) with 7.5mW power consumption from a 3.3V supply. The die area is 1.27mm2. The fabricated delta-sigma modulator achieves the highest figure-of-merit among published high performance low power audio delta-sigma modulators.

  7. A thirst for power: A global analysis of water consumption for energy production

    NASA Astrophysics Data System (ADS)

    Spang, Edward

    Producing energy resources requires significant quantities of freshwater. As an energy sector changes or expands, the mix of technologies deployed to produce fuels and electricity determines the associated burden on regional water resources. A number of reports exist that specify water consumption by discrete energy production technologies. This research synthesizes and expands this previous work by examining the global distribution of water consumption intensity of national-level energy portfolios. By defining and calculating indicators to quantify the relative water use intensity of national energy systems, it was possible to highlight potentially problematic areas of high water use intensity while also providing examples of water-efficient energy production. The results of the research show a high variability in the national water consumption of energy production (WCEP) for the 158 countries that were assessed. However, looking across the indicators for WCEP internationally, the countries that were heavily producing fossil fuel or biofuels demonstrated the greatest intensity of energy-based water consumption. The economic imperative to develop fossil fuels drives high water consumption in countries that already lack sufficient water supplies. Meanwhile, biofuels require so much water over their lifecycle per unit of produced energy that any modest commitment to producing biofuels has significant water consumption ramifications for the country. While these results are based on a comprehensive review of available data, future research in this area could be significantly enhanced through better data and widespread adoption of consistent reporting mechanisms. Additional opportunities to expand the field include increasing the resolution of the study regions, tracking these indicators over time, and exploring innovative policy approaches to managing national WCEP effectively. For nations facing the greatest limitations in the availability of local water and energy

  8. Mitigating an increase of specific power consumption in a cryogenic air separation unit at reduced oxygen production

    NASA Astrophysics Data System (ADS)

    Singla, Rohit; Chowdhury, Kanchan

    2017-02-01

    Specific power consumed in a Linde double column air separation unit (ASU) increases as the quantity of oxygen produced at a given purity is decreased due to the changes of system requirement or market demand. As the plant operates in part load condition, the specific power consumption (SPC) increases as the total power consumption remains the same. In order to mitigate the increase of SPC at lower oxygen production, the operating pressure of high pressure column (HPC) can be lowered by extending the low pressure column (LPC) by a few trays and adding a second reboiler. As the duty of second reboiler in LPC is increased, the recovery of oxygen decreases with a lowering of the HPC pressure. This results in mitigation of the increase of SPC of the plant. A Medium pressure ASU with dual reboiler that produces pressurised gaseous and liquid products of oxygen and nitrogen is simulated in Aspen Hysys 8.6®, a commercial process simulator to determine SPC at varying oxygen production. The effects of reduced pressure of air feed into the cold box on the size of heat exchangers (HX) are analysed. Operation strategy to obtain various oxygen production rates at varying demand is also proposed.

  9. A fast, ultra-low and frequency-scalable power consumption, 10-bit SAR ADC for particle physics detectors

    NASA Astrophysics Data System (ADS)

    Firlej, M.; Fiutowski, T.; Idzik, M.; Kulis, S.; Moron, J.; Swientek, K.

    2015-11-01

    The design and measurements results of a fast 10-bit SAR ADC with ultra-low and scalable with frequency power consumption, developed for readout systems for detectors at future particle physics colliders (ILC, CLIC, LHC Upgrade), are described. A prototype ASIC was designed and fabricated in 130 nm CMOS technology and a wide spectrum of static (INLlesssim0.5 LSB, DNLlesssim0.5 LSB) and dynamic (SINAD ~58 dB, ENOB~9.3) measurements was performed to study and quantify the ADC performance. The ADC works in wide 10 kS/s - 40 MS/s sampling frequency range, covering more than three orders of magnitude. In most of the range the power consumption scales linearly with sampling rate with a factor of about 22 μW/MS/s. A dynamic and asynchronous internal logic makes the ADC very well suited not only for commonly used synchronous sampling but also for applications with asynchronous sampling and/or the ones requiring power cycling, like the experiments at future linear collider (ILC/CLIC). The ADC layout is drawn with a small pitch of 146 μm to facilitate multi-channel integration. The obtained figure of Merit is in range 32-37 fJ/conversion for sampling frequencies 10-40 MS/s, placing the ADC among the best State of the Art designs with similar technology and specifications.

  10. Flexoelectric effect in an in-plane switching (IPS) liquid crystal cell for low-power consumption display devices

    PubMed Central

    Kim, Min Su; Bos, Philip J.; Kim, Dong-Woo; Yang, Deng-Ke; Lee, Joong Hee; Lee, Seung Hee

    2016-01-01

    Technology of displaying static images in portable displays, advertising panels and price tags pursues significant reduction in power consumption and in product cost. Driving at a low-frequency electric field in fringe-field switching (FFS) mode can be one of the efficient ways to save powers of the recent portable devices, but a serious drop of image-quality, so-called image-flickering, has been found in terms of the coupling of elastic deformation to not only quadratic dielectric effect but linear flexoelectric effect. Despite of the urgent requirement of solving the issue, understanding of such a phenomenon is yet vague. Here, we thoroughly analyze and firstly report the flexoelectric effect in in-plane switching (IPS) liquid crystal cell. The effect takes place on the area above electrodes due to splay and bend deformations of nematic liquid crystal along oblique electric fields, so that the obvious spatial shift of the optical transmittance is experimentally observed and is clearly demonstrated based on the relation between direction of flexoelectric polarization and electric field polarity. In addition, we report that the IPS mode has inherent characteristics to solve the image-flickering issue in the low-power consumption display in terms of the physical property of liquid crystal material and the electrode structure. PMID:27731372

  11. Flexoelectric effect in an in-plane switching (IPS) liquid crystal cell for low-power consumption display devices

    NASA Astrophysics Data System (ADS)

    Kim, Min Su; Bos, Philip J.; Kim, Dong-Woo; Yang, Deng-Ke; Lee, Joong Hee; Lee, Seung Hee

    2016-10-01

    Technology of displaying static images in portable displays, advertising panels and price tags pursues significant reduction in power consumption and in product cost. Driving at a low-frequency electric field in fringe-field switching (FFS) mode can be one of the efficient ways to save powers of the recent portable devices, but a serious drop of image-quality, so-called image-flickering, has been found in terms of the coupling of elastic deformation to not only quadratic dielectric effect but linear flexoelectric effect. Despite of the urgent requirement of solving the issue, understanding of such a phenomenon is yet vague. Here, we thoroughly analyze and firstly report the flexoelectric effect in in-plane switching (IPS) liquid crystal cell. The effect takes place on the area above electrodes due to splay and bend deformations of nematic liquid crystal along oblique electric fields, so that the obvious spatial shift of the optical transmittance is experimentally observed and is clearly demonstrated based on the relation between direction of flexoelectric polarization and electric field polarity. In addition, we report that the IPS mode has inherent characteristics to solve the image-flickering issue in the low-power consumption display in terms of the physical property of liquid crystal material and the electrode structure.

  12. Flexoelectric effect in an in-plane switching (IPS) liquid crystal cell for low-power consumption display devices.

    PubMed

    Kim, Min Su; Bos, Philip J; Kim, Dong-Woo; Yang, Deng-Ke; Lee, Joong Hee; Lee, Seung Hee

    2016-10-12

    Technology of displaying static images in portable displays, advertising panels and price tags pursues significant reduction in power consumption and in product cost. Driving at a low-frequency electric field in fringe-field switching (FFS) mode can be one of the efficient ways to save powers of the recent portable devices, but a serious drop of image-quality, so-called image-flickering, has been found in terms of the coupling of elastic deformation to not only quadratic dielectric effect but linear flexoelectric effect. Despite of the urgent requirement of solving the issue, understanding of such a phenomenon is yet vague. Here, we thoroughly analyze and firstly report the flexoelectric effect in in-plane switching (IPS) liquid crystal cell. The effect takes place on the area above electrodes due to splay and bend deformations of nematic liquid crystal along oblique electric fields, so that the obvious spatial shift of the optical transmittance is experimentally observed and is clearly demonstrated based on the relation between direction of flexoelectric polarization and electric field polarity. In addition, we report that the IPS mode has inherent characteristics to solve the image-flickering issue in the low-power consumption display in terms of the physical property of liquid crystal material and the electrode structure.

  13. Optimal Topology Control and Power Allocation for Minimum Energy Consumption in Consensus Networks

    DTIC Science & Technology

    2011-12-16

    network topology can be modeled as a random graph model. It can be shown [22], [23] that the system in (3) converges to consensus almost surely, i.e...Terms— Consensus algorithms, minimum energy con- sumption, random graphs, sensor networks, topology control. I. INTRODUCTION A VERAGE consensus ...network context, it is necessary to minimize the en- ergy consumption necessary to reach consensus . Clearly, the network topology plays a fundamental role

  14. The pulling power of chocolate: Effects of approach-avoidance training on approach bias and consumption.

    PubMed

    Dickson, Hugh; Kavanagh, David J; MacLeod, Colin

    2016-04-01

    Previous research has shown that action tendencies to approach alcohol may be modified using computerized Approach-Avoidance Task (AAT), and that this impacted on subsequent consumption. A recent paper in this journal (Becker, Jostman, Wiers, & Holland, 2015) failed to show significant training effects for food in three studies: Nor did it find effects on subsequent consumption. However, avoidance training to high calorie foods was tested against a control rather than Approach training. The present study used a more comparable paradigm to the alcohol studies. It randomly assigned 90 participants to 'approach' or 'avoid' chocolate images on the AAT, and then asked them to taste and rate chocolates. A significant interaction of condition and time showed that training to avoid chocolate resulted in faster avoidance responses to chocolate images, compared with training to approach it. Consistent with Becker et al.'s Study 3, no effect was found on amounts of chocolate consumed, although a newly published study in this journal (Schumacher, Kemps, & Tiggemann, 2016) did do so. The collective evidence does not as yet provide solid basis for the application of AAT training to reduction of problematic food consumption, although clinical trials have yet to be conducted.

  15. A Thirst for Power: Measuring the Water Consumption of National Energy Production Portfolios

    NASA Astrophysics Data System (ADS)

    Spang, E.

    2011-12-01

    Discussion of the environmental implications of worldwide energy demand is currently dominated by the effects of CO2 emissions on our global climate. However, at the regional scale, the water resource requirements associated with energy systems are a growing concern. While much of the research in this area (commonly referred to as the "water-energy nexus") has focused on estimating the water consumption of discrete energy technologies, this research synthesizes and expands the existing work in the field to explore the comprehensive water consumption of national level energy portfolios. Understanding the system-wide coupled demand for these resources is crucial for regional governments seeking to improve and protect both water and energy security. To provide a new perspective on the topic, I defined a set of water intensity metrics for national energy production, calculated indicator values for over 150 countries, and digitally mapped the results to create the first global representation of the geographic distribution of water-intensive energy systems. The results demonstrate a high level of variation in the composition and quantities of water consumption across nations as well as across the suite of indicators that were applied. This suggests that meaningful evaluation of water-energy systems fundamentally requires the consideration of spatial and regional characteristics, as well as the application of multiple indicators to define the intensity of the coupled relationship.

  16. Tool for a configurable integrated circuit that uses determination of dynamic power consumption

    NASA Technical Reports Server (NTRS)

    French, Matthew C. (Inventor); Wang, Li (Inventor); Agarwal, Deepak (Inventor); Davoodi, Azadeh (Inventor)

    2011-01-01

    A configurable logic tool that allows minimization of dynamic power within an FPGA design without changing user-entered specifications. The minimization of power may use minimized clock nets as a first order operation, and a second order operation that minimizes other factors, such as area of placement, area of clocks and/or slack.

  17. Effects of Village Power Quality on Fuel Consumption and Operating Expenses

    SciTech Connect

    Richard Wies; Ron Johnson

    2008-12-31

    Alaska's rural village electric utilities are isolated from the Alaska railbelt electrical grid intertie and from each other. Different strategies have been developed for providing power to meet demand in each of these rural communities. Many of these communities rely on diesel electric generators (DEGs) for power. Some villages have also installed renewable power sources and automated generation systems for controlling the DEGs and other sources of power. For example, Lime Village has installed a diesel battery photovoltaic hybrid system, Kotzebue and Wales have wind-diesel hybrid systems, and McGrath has installed a highly automated system for controlling diesel generators. Poor power quality and diesel engine efficiency in village power systems increases the cost of meeting the load. Power quality problems may consist of poor power factor (PF) or waveform disturbances, while diesel engine efficiency depends primarily on loading, the fuel type, the engine temperature, and the use of waste heat for nearby buildings. These costs take the form of increased fuel use, increased generator maintenance, and decreased reliability. With the cost of bulk fuel in some villages approaching $1.32/liter ($5.00/gallon) a modest 5% decrease in fuel use can result in substantial savings with short payback periods depending on the village's load profile and the cost of corrective measures. This project over its five year history has investigated approaches to improving power quality and implementing fuel savings measures through the use of performance assessment software tools developed in MATLAB{reg_sign} Simulink{reg_sign} and the implementation of remote monitoring, automated generation control, and the addition of renewable energy sources in select villages. The results have shown how many of these communities would benefit from the use of automated generation control by implementing a simple economic dispatch scheme and the integration of renewable energy sources such as wind

  18. Compact CH4 sensor system based on a continuous-wave, low power consumption, room temperature interband cascade laser

    NASA Astrophysics Data System (ADS)

    Dong, Lei; Li, Chunguang; Sanchez, Nancy P.; Gluszek, Aleksander K.; Griffin, Robert J.; Tittel, Frank K.

    2016-01-01

    A tunable diode laser absorption spectroscopy-based methane sensor, employing a dense-pattern multi-pass gas cell and a 3.3 μm, CW, DFB, room temperature interband cascade laser (ICL), is reported. The optical integration based on an advanced folded optical path design and an efficient ICL control system with appropriate electrical power management resulted in a CH4 sensor with a small footprint (32 × 20 × 17 cm3) and low-power consumption (6 W). Polynomial and least-squares fit algorithms are employed to remove the baseline of the spectral scan and retrieve CH4 concentrations, respectively. An Allan-Werle deviation analysis shows that the measurement precision can reach 1.4 ppb for a 60 s averaging time. Continuous measurements covering a seven-day period were performed to demonstrate the stability and robustness of the reported CH4 sensor system.

  19. Regrowth-free single-mode quantum cascade lasers with power consumption below 1 W

    SciTech Connect

    Briggs, Ryan M. Frez, Clifford; Borgentun, Carl E.; Forouhar, Siamak

    2014-10-06

    We report on single-mode distributed-feedback quantum cascade lasers emitting at 4.8 μm with continuous-wave threshold power consumption as low as 0.76 W at 20 °C and 0.98 W at 50 °C. Following growth of the laser active region and semiconductor cladding layers by a single molecular beam epitaxy process, devices with 4-μm-wide ridges and vertical sidewall gratings were fabricated using plasma etching and standard dielectric and metal deposition processes. In terms of mode stability, output power, and efficiency, we show that lasers with 1-mm cavity length and high-reflectivity back-facet coatings can match the performance of buried heterostructure devices, but with the advantage of requiring only a single epitaxial growth step.

  20. Highly-Ordered 3D Vertical Resistive Switching Memory Arrays with Ultralow Power Consumption and Ultrahigh Density.

    PubMed

    Al-Haddad, Ahmed; Wang, Chengliang; Qi, Haoyuan; Grote, Fabian; Wen, Liaoyong; Bernhard, Jörg; Vellacheri, Ranjith; Tarish, Samar; Nabi, Ghulam; Kaiser, Ute; Lei, Yong

    2016-09-07

    Resistive switching random access memories (RRAM) have attracted great scientific and industrial attention for next generation data storage because of their advantages of nonvolatile properties, high density, low power consumption, fast writing/erasing speed, good endurance, and simple and small operation system. Here, by using a template-assisted technique, we demonstrate a three-dimensional highly ordered vertical RRAM device array with density as high as that of the nanopores of the template (10(8)-10(9) cm(-2)), which can also be fabricated in large area. The high crystallinity of the materials, the large contact area and the intimate semiconductor/electrode interface (3 nm interfacial layer) make the ultralow voltage operation (millivolt magnitude) and ultralow power consumption (picowatt) possible. Our procedure for fabrication of the nanodevice arrays in large area can be used for producing many other different materials and such three-dimensional electronic device arrays with the capability to adjust the device densities can be extended to other applications of the next generation nanodevice technology.

  1. Methodologies for assessing the use-phase power consumption and greenhouse gas emissions of telecommunications network services.

    PubMed

    Chan, Chien A; Gygax, André F; Wong, Elaine; Leckie, Christopher A; Nirmalathas, Ampalavanapillai; Kilper, Daniel C

    2013-01-02

    Internet traffic has grown rapidly in recent years and is expected to continue to expand significantly over the next decade. Consequently, the resulting greenhouse gas (GHG) emissions of telecommunications service-supporting infrastructures have become an important issue. In this study, we develop a set of models for assessing the use-phase power consumption and carbon dioxide emissions of telecom network services to help telecom providers gain a better understanding of the GHG emissions associated with the energy required for their networks and services. Due to the fact that measuring the power consumption and traffic in a telecom network is a challenging task, these models utilize different granularities of available network information. As the granularity of the network measurement information decreases, the corresponding models have the potential to produce larger estimation errors. Therefore, we examine the accuracy of these models under various network scenarios using two approaches: (i) a sensitivity analysis through simulations and (ii) a case study of a deployed network. Both approaches show that the accuracy of the models depends on the network size, the total amount of network service traffic (i.e., for the service under assessment), and the number of network nodes used to process the service.

  2. Tobacco talk: reflections on corporate power and the legal framing of consumption.

    PubMed

    Benson, Peter

    2010-12-01

    This article examines how North Carolina tobacco farmers think about the moral ambiguities of tobacco business. Drawing on ethnographic research with tobacco farmers and archival research on the tobacco industry, I specify the core psychological defense mechanisms that tobacco companies have crafted for people associated with the industry. I also document local social, cultural, and economic factors in rural North Carolina that underpin ongoing rural dependence on tobacco despite the negativity that surrounds tobacco and structural adjustments. This article contributes to our knowledge about tobacco farmers and tobacco farming communities, which is important for tobacco-control strategies. I reflect on ethical and economic paradoxes related to the rise of corporate social responsibility in the tobacco industry, where an official legal framing of consumption, focused on informed adult consumer autonomy and health education, is promoted to undermine more robust public health prevention efforts.

  3. Low Power Consumption Lasers for Miniature Optical Spectrometers for Trace Gas Analysis

    NASA Technical Reports Server (NTRS)

    Forouhar, S.; Frez, C.; Franz, K. J.; Ksendzov, A.; Qiu, Y.; Soibel, K. A.; Chen, J.; Hosoda, T.; Kipshidze, G.; Shterengas, L.; Belenky, G.

    2011-01-01

    The air quality of any manned spacecraft needs to be continuously monitored in order to safeguard the health of the crew. Air quality monitoring grows in importance as mission duration increases. Due to the small size, low power draw, and performance reliability, semiconductor laser-based instruments are viable candidates for this purpose. Achieving a minimum instrument size requires lasers with emission wavelength coinciding with the absorption of the fundamental absorption lines of the target gases, which are mostly in the 3.0-5.0 micron wavelength range. In this paper we report on our progress developing high wall plug efficiency type-I quantum-well GaSb-based diode lasers operating at room temperatures in the spectral region near 3.0-3.5 micron and quantum cascade (QC) lasers in the 4.0-5.0 micron range. These lasers will enable the development of miniature, low-power laser spectrometers for environmental monitoring of the spacecraft.

  4. Wing-wake interaction reduces power consumption in insect tandem wings

    NASA Astrophysics Data System (ADS)

    Lehmann, Fritz-Olaf

    2009-05-01

    Insects are capable of a remarkable diversity of flight techniques. Dragonflies, in particular, are notable for their powerful aerial manoeuvres and endurance during prey catching or territory flights. While most insects such as flies, bees and wasps either reduced their hinds wings or mechanically coupled fore and hind wings, dragonflies have maintained two independent-controlled pairs of wings throughout their evolution. An extraordinary feature of dragonfly wing kinematics is wing phasing, the shift in flapping phase between the fore and hind wing periods. Wing phasing has previously been associated with an increase in thrust production, readiness for manoeuvrability and hunting performance. Recent studies have shown that wing phasing in tandem wings produces a twofold modulation in hind wing lift, but slightly reduces the maximum combined lift of fore and hind wings, compared to two wings flapping in isolation. Despite this disadvantage, however, wing phasing is effective in improving aerodynamic efficiency during flight by the removal of kinetic energy from the wake. Computational analyses demonstrate that this increase in flight efficiency may save up to 22% aerodynamic power expenditure compared to insects flapping only two wings. In terms of engineering, energetic benefits in four-wing flapping are of substantial interest in the field of biomimetic aircraft design, because the performance of man-made air vehicles is often limited by high-power expenditure rather than by lift production. This manuscript provides a summary on power expenditures and aerodynamic efficiency in flapping tandem wings by investigating wing phasing in a dynamically scaled robotic model of a hovering dragonfly.

  5. Wing-wake interaction reduces power consumption in insect tandem wings

    NASA Astrophysics Data System (ADS)

    Lehmann, Fritz-Olaf

    Insects are capable of a remarkable diversity of flight techniques. Dragonflies, in particular, are notable for their powerful aerial manoeuvres and endurance during prey catching or territory flights. While most insects such as flies, bees and wasps either reduced their hinds wings or mechanically coupled fore and hind wings, dragonflies have maintained two independent-controlled pairs of wings throughout their evolution. An extraordinary feature of dragonfly wing kinematics is wing phasing, the shift in flapping phase between the fore and hind wing periods. Wing phasing has previously been associated with an increase in thrust production, readiness for manoeuvrability and hunting performance. Recent studies have shown that wing phasing in tandem wings produces a twofold modulation in hind wing lift, but slightly reduces the maximum combined lift of fore and hind wings, compared to two wings flapping in isolation. Despite this disadvantage, however, wing phasing is effective in improving aerodynamic efficiency during flight by the removal of kinetic energy from the wake. Computational analyses demonstrate that this increase in flight efficiency may save up to 22% aerodynamic power expenditure compared to insects flapping only two wings. In terms of engineering, energetic benefits in four-wing flapping are of substantial interest in the field of biomimetic aircraft design, because the performance of man-made air vehicles is often limited by high-power expenditure rather than by lift production. This manuscript provides a summary on power expenditures and aerodynamic efficiency in flapping tandem wings by investigating wing phasing in a dynamically scaled robotic model of a hovering dragonfly.

  6. Measurement of Fine Particles From Mobile and Stationary Sources, and Reducing the Air Conditioner Power Consumption in Hybrid Electric Vehicles

    NASA Astrophysics Data System (ADS)

    Brewer, Eli Henry

    We study the PM2.5and ultrafine exhaust emissions from a new natural gas-fired turbine power facility to better understand air pollution in California. To characterize the emissions from new natural gas turbines, a series of tests were performed on a GE LMS100 gas turbine. These tests included PM2.5 and wet chemical tests for SO2/SO 3 and NH3, as well as ultrafine (less than 100 nm in diameter) particulate matter measurements. The turbine exhaust had an average particle number concentration that was 2.3x103 times higher than ambient air. The majority of these particles were nanoparticles; at the 100 nm size, stack particle concentrations were about 20 times higher than ambient, and increased to 3.9x104 times higher on average in the 2.5 - 3 nm particle size range. This study also found that ammonia emissions were higher than expected, but in compliance with permit conditions. This was possibly due to an ammonia imbalance entering the catalyst, some flue gas bypassing the catalyst, or not enough catalyst volume. SO3 accounted for an average of 23% of the total sulfur oxides emissions measured. Some of the SO3 is formed in the combustion process, it is likely that the majority formed as the SO2 in the combustion products passed across the oxidizing CO catalyst and SCR catalyst. The 100 MW turbine sampled in this study emitted particle loadings similar to those previously measured from turbines in the SCAQMD area, however, the turbine exhaust contained far more particles than ambient air. The power consumed by an air conditioner accounts for a significant fraction of the total power used by hybrid and electric vehicles especially during summer. This study examined the effect of recirculation of cabin air on power consumption of mobile air conditioners both in-lab and on-road. Real time power consumption and vehicle mileage were recorded by an On Board Diagnostic monitor and carbon balance method. Vehicle mileage improved with increased cabin air recirculation. The

  7. Fuel consumption and fire emissions estimates using Fire Radiative Power, burned area and statistical modelling on the fire event scale

    NASA Astrophysics Data System (ADS)

    Ruecker, Gernot; Leimbach, David; Guenther, Felix; Barradas, Carol; Hoffmann, Anja

    2016-04-01

    Fire Radiative Power (FRP) retrieved by infrared sensors, such as flown on several polar orbiting and geostationary satellites, has been shown to be proportional to fuel consumption rates in vegetation fires, and hence the total radiative energy released by a fire (Fire Radiative Energy, FRE) is proportional to the total amount of biomass burned. However, due to the sparse temporal coverage of polar orbiting and the coarse spatial resolution of geostationary sensors, it is difficult to estimate fuel consumption for single fire events. Here we explore an approach for estimating FRE through temporal integration of MODIS FRP retrievals over MODIS-derived burned areas. Temporal integration is aided by statistical modelling to estimate missing observations using a generalized additive model (GAM) and taking advantage of additional information such as land cover and a global dataset of the Canadian Fire Weather Index (FWI), as well as diurnal and annual FRP fluctuation patterns. Based on results from study areas located in savannah regions of Southern and Eastern Africa and Brazil, we compare this method to estimates based on simple temporal integration of FRP retrievals over the fire lifetime, and estimate the potential variability of FRP integration results across a range of fire sizes. We compare FRE-based fuel consumption against a database of field experiments in similar landscapes. Results show that for larger fires, this method yields realistic estimates and is more robust when only a small number of observations is available than the simple temporal integration. Finally, we offer an outlook on the integration of data from other satellites, specifically FireBird, S-NPP VIIRS and Sentinel-3, as well as on using higher resolution burned area data sets derived from Landsat and similar sensors.

  8. Low power consumption and continuously tunable all-optical microwave filter based on an opto-mechanical microring resonator.

    PubMed

    Liu, Li; Yang, Yue; Li, Zhihua; Jin, Xing; Mo, Wenqin; Liu, Xing

    2017-01-23

    We propose and experimentally demonstrate a continuously tunable all-optical microwave filter using a silicon opto-mechanical microring resonator (MRR). By finely adjusting the pump light with submilliwatt power level, transmission spectrum of the MRR could be continuously shifted based on the nonlinear effects, including the opto-mechanical effect and thermo-optic effect. Therefore, in the case of optical single sideband (OSSB) modulation, the frequency intervals between the optical carrier (near one MRR resonance) and the corresponding resonance could be flexibly manipulated, which is the critical factor to achieve continuously tunable microwave photonic filter (MPF). In the experiment, the central frequency of the MPF could be continuously tuned from 6 GHz to 19 GHz with the pump power lower than -2.5 dBm. The proposed opto-mechanical device is competent to process microwave signals with dominant advantages, such as compact footprint, all-optical control and low power consumption. In the future, using light to control light, the opto-mechanical structure on silicon platforms might have many other potential applications in microwave systems, such as microwave switch.

  9. Power consumption, discharge capacitance and light emission as measures for thrust production of dielectric barrier discharge plasma actuators

    SciTech Connect

    Kriegseis, J.; Grundmann, S.; Tropea, C.

    2011-07-01

    A new procedure of determining the time resolved capacitance of a plasma actuator during operation is introduced, representing a simple diagnostic tool that provides insight into the phenomenological behavior of plasma actuators. The procedure is demonstrated by presenting example correlations between consumed electrical energy, size of the plasma region, and the operating voltage. It is shown that the capacitance of a plasma actuator is considerably increased by the presence of the plasma; hence a system that has previously been impedance matched can be considerably de-tuned when varying the operating voltage of the actuator. Such information is fundamental for any attempts to increase the energy efficiency of plasma-actuator systems. A combined analysis of the capacitance, light emission, size of the plasma region, force production, and power consumption is presented.

  10. Compact, lower-power-consumption wavelength tunable laser fabricated with silicon photonic-wire waveguide micro-ring resonators.

    PubMed

    Chu, Tao; Fujioka, Nobuhide; Ishizaka, Masashige

    2009-08-03

    A wavelength tunable laser with an SOA and external double micro-ring resonator, which is fabricated with silicon photonic-wire waveguides, is demonstrated. To date, it is the first wavelength tunable laser fabricated with silicon photonic technology. The device is ultra compact, and its external resonator footprint is 700 x 450 microm, which is about 1/25 that of conventional tunable lasers fabricated with SiON waveguides. The silicon resonator shows a wide tuning range covering the C or L bands for DWDM optical communication. We obtained a maximum tuning span of 38 nm at a tuning power consumption of 26 mW, which is about 1/8 that of SiON-type resonators.

  11. Monitoring of a micro-smart grid: Power consumption data of some machineries of an agro-industrial test site.

    PubMed

    Fabrizio, Enrico; Biglia, Alessandro; Branciforti, Valeria; Filippi, Marco; Barbero, Silvia; Tecco, Giuseppe; Mollo, Paolo; Molino, Andrea

    2017-02-01

    For the management of a (micro)-smart grid it is important to know the patters of the load profiles and of the generators. In this article the power consumption data obtained through a monitoring activity developed on a micro-smart grid in an agro-industrial test-site are presented. In particular, this reports the synthesis of the monitoring results of 5 loads (5 industrial machineries for crop micronization, corncob crashing and other similar processes). How these data were used within a monitoring and managing scheme of a micro-smart grid can be found in (E. Fabrizio, V. Branciforti, A. Costantino, M. Filippi, S. Barbero, G. Tecco, P. Mollo, A. Molino, 2017) [1]. The data can be useful for other researchers in order to create benchmarks of energy use input appropriate energy demand values in optimization tools for the industrial sector.

  12. Reflective dual-mode liquid crystal display possessing low power consumption and high contrast ratio under ambient light.

    PubMed

    Kim, Taehyung; Lee, Joong Ha; Yoon, Tae-Hoon; Choi, Suk-Won

    2012-07-02

    We propose a reflective dual-mode liquid crystal display (RD-LCD) which has advantages of long memory retention time and high contrast ratio. The proposed device adopts ideal bistable characteristics, a cell thickness over pitch (d/p) of 0.25. It can realize long memory retention time, thereby reducing power consumption. In addition, an optical configuration for the RD-LCD makes low light leakages at dark state and shows good dispersion characteristics in both dark and bright states over the entire visible ranges. We experimentally confirmed retention time over 6 months in memory mode and memory and dynamic contrast ratios of 47:1 and 43:1 under ambient light, respectively. As a result, the proposed RD-LCD demonstrates convincingly that it is a candidate for green display.

  13. Undulatory Swimming in Shear-Thinning Fluids: Flow Fields & Power Consumption

    NASA Astrophysics Data System (ADS)

    Gagnon, David; Montenegro-Johnson, Thomas; Lauga, Eric; Arratia, Paulo

    2016-11-01

    In this talk, we investigate the flow and dynamics of the undulatory swimmer Caenorhabditis elegans in shear-thinning fluids. Recent theoretical and numerical studies have shown that the cost of swimming, or mechanical power, for a 2D waving sheet is reduced in shear-thinning fluids. Here, we use velocimetry and tracking techniques to experimentally investigate this hypothesis using two methods: (i) an estimate of the mechanical power of the swimmer and (ii) the viscous dissipation rate of the flow field. We find the cost of swimming for C. elegans in shear-thinning fluids is reduced when compared to the cost of swimming in Newtonian fluids, scales with a fluid's effective viscosity, and can be predicted using fluid rheology and simple swimming kinematics. These results, however, have a caveat: only a planar (2D) slice of the 3D flow field around swimmer is accessible for analysis. In order to better interpret our flow measurements, we compare our planar velocimetry to a full 3D boundary element method simulation. We find that nearly all deviations between experiments and simulations can be accounted for by a simple correction factor involving the out-of-plane velocity gradient, which can be computed directly from planar experimental data using incompressibility.

  14. Low Power Consumption Laser for Next Generation Miniature Optical Spectrometers for Trace Gas Analysis

    NASA Technical Reports Server (NTRS)

    Forouhar, S.; Frez, C.; Franz, K. J.; Ksendzov, A.; Qiu, Y.; Soibel, K. A.; Chen, J.; Hosoda, T.; Kipshidze, G.; Shterengas, L.; Belenky, G.

    2011-01-01

    The air quality of any manned spacecraft needs to be continuously monitored in order to safeguard the health of the crew. Air quality monitoring grows in importance as mission duration increases. Due to the small size, low power draw, and performance reliability, semiconductor laser-based instruments are viable candidates for this purpose. Achieving a minimum instrument size requires lasers with emission wavelength coinciding with the absorption of the fundamental absorption lines of the target gases, which are mostly in the 3.0-5.0 mu m wavelength range. In this paper we report on our progress developing high wall plug efficiency type-I quantum-well GaSb-based diode lasers operating at room temperatures in the spectral region near 3.0-3.5 mu m and quantum cascade (QC) lasers in the 4.0-5.0 mu m range. These lasers will enable the development of miniature, low-power laser spectrometers for environmental monitoring of the spacecraft

  15. Development of highly compact and low power consumption athermal military laser designators

    NASA Astrophysics Data System (ADS)

    Sijan, A.

    2012-10-01

    The utility of military lasers, particularly in the area of laser designation for laser-guided weapons, is well understood. Laser systems based on Nd:YAG have been fielded since the 1980's and over the last three decades have introduced incremental technology steps to improve performance and weight. The most recent technology step has been the introduction of athermal lasers based on laser-diode pumping of Nd:YAG and products are now emerging for use on the battlefield. The technical performance, efficiency, size, weight and power for these lasers, has been key to driving the new production designs. In this paper, we review the development of the laser designs and their introduction since the advent of laser designation. In particular, we compare the relative performance and characteristics over the evolution of fielded laser designators. Moreover, we will review the key building blocks for the design of athermal lasers and describe some critical design issues for engineering and productionisation of a military laser system, including removal of thermal lensing, novel diode-pumping schemes and robustness over the environment. These will be exemplified using results from the development of the SELEX Galileo Type 163 Laser Target Designators. These will cover not only technical performance, power and efficiency, but also thermal management, mass, volume, cost and overall complexity for manufacture.

  16. Stable single-mode distributed feedback quantum cascade lasers at λ ∼ 4.25 μm with low power consumption

    NASA Astrophysics Data System (ADS)

    Jia, Zhiwei; Wang, Lijun; Zhang, Jinchuan; Liu, Fengqi; Zhuo, Ning; Zhai, Shenqiang; Liu, Junqi; Wang, Zhanguo

    2016-10-01

    Short-wavelength (4.25 μm) distributed-feedback quantum cascade laser operating in continuous wave (cw) mode at room temperature with low power consumption was presented. Stable single-mode operation with a side-mode-suppression-ratio above 25 dB was maintained for the whole measured current and temperature range by enlarging gain difference and strong grating coupling. Because of the strong coupling, very low threshold current and power consumption were achieved. For a device of 9-μm-wide and 2-mm-long, the cw threshold current and power consumption at 293 K were as low as 126 mA and 1.45 W, respectively. All results above were from the device without using buried heterostructure geometry.

  17. RETRACTED — Preparation of helical biphenyl polyurethane and its low power consumption thermo-optic switch

    NASA Astrophysics Data System (ADS)

    Wang, Qing; Qiu, Fengxian; Yang, Dongya; Cao, Guorong; Guan, Yijun; Shen, Qiang; Zhuang, Lin; Cao, Zhijuan; Ye, Feiyan

    2013-04-01

    Azo chromophore molecule (NDPD) and helical biphenyl polyurethane (HBPU) were prepared. The chemical structures of NDPD and HBPU were characterized by FTIR and UV-vis spectroscopy. The measurements of refractive index, thermo-optic coefficient (dn/dT), transmission loss, refractive index dispersions and Sellmeyer coefficients of HBPU were measured using ATR technique, CCD digital imaging devices and Sellmeyer equation. The results showed that HBPU would be useful for the design of high performance digital optical switch. The prepared HBPU was utilized as core material to propose a Y-branch thermo-optic switch, which was based on thermo-optic effect of HBPU at the infrared communication wavelength of 1.55 μm. With branching angle of 0.143° and the finite difference beam propagation method (FD-BPM), the polymeric thermo-optic switch was simulated. The simulation results indicated that the device has a low switching power of 1.68 mW and a switching response time of 7.0 ms.

  18. High Operating Temperature and Low Power Consumption Boron Nitride Nanosheets Based Broadband UV Photodetector.

    PubMed

    Rivera, Manuel; Velázquez, Rafael; Aldalbahi, Ali; Zhou, Andrew F; Feng, Peter

    2017-03-03

    We extend our work on the use of digitally controlled pulsed laser plasma deposition (PLPD) technique to synthesize high quality, 2-dimensional single crystalline boron nitride nanosheets (BNNSs) at a low substrate temperature for applications in high-performance deep UV photodetectors. The obtained sample consists of a large amount of BNNSs partially overlapping one another with random orientations. Each sheet is composed of a few (from 2 to 10) stacked atomic layers exhibiting high transparency due to its highly ordered hBN crystallinity. Deep UV detectors based on the obtained BNNSs were designed, fabricated, and tested. The bias and temperature effects on the photocurrent strength and the signal-to-noise ratio have been carefully characterized and discussed. A significant shift in the cut off wavelength of the BNNSs based photodetectors was observed suggesting a band gap reduction as a result of the BNNSs' collective structure. The newly designed photodetector presented exceptional properties: a high sensitivity to weak intensities of radiation in both UVC and UVB range while remaining visible-blind, and a high signal-to-noise ratio operation even at temperatures as high as 400 °C. In addition, the BNNSs based photodetector exhibited potential for self-powered operation.

  19. High Operating Temperature and Low Power Consumption Boron Nitride Nanosheets Based Broadband UV Photodetector

    PubMed Central

    Rivera, Manuel; Velázquez, Rafael; Aldalbahi, Ali; Zhou, Andrew F.; Feng, Peter

    2017-01-01

    We extend our work on the use of digitally controlled pulsed laser plasma deposition (PLPD) technique to synthesize high quality, 2-dimensional single crystalline boron nitride nanosheets (BNNSs) at a low substrate temperature for applications in high-performance deep UV photodetectors. The obtained sample consists of a large amount of BNNSs partially overlapping one another with random orientations. Each sheet is composed of a few (from 2 to 10) stacked atomic layers exhibiting high transparency due to its highly ordered hBN crystallinity. Deep UV detectors based on the obtained BNNSs were designed, fabricated, and tested. The bias and temperature effects on the photocurrent strength and the signal-to-noise ratio have been carefully characterized and discussed. A significant shift in the cut off wavelength of the BNNSs based photodetectors was observed suggesting a band gap reduction as a result of the BNNSs’ collective structure. The newly designed photodetector presented exceptional properties: a high sensitivity to weak intensities of radiation in both UVC and UVB range while remaining visible-blind, and a high signal-to-noise ratio operation even at temperatures as high as 400 °C. In addition, the BNNSs based photodetector exhibited potential for self-powered operation. PMID:28256507

  20. High Operating Temperature and Low Power Consumption Boron Nitride Nanosheets Based Broadband UV Photodetector

    NASA Astrophysics Data System (ADS)

    Rivera, Manuel; Velázquez, Rafael; Aldalbahi, Ali; Zhou, Andrew F.; Feng, Peter

    2017-03-01

    We extend our work on the use of digitally controlled pulsed laser plasma deposition (PLPD) technique to synthesize high quality, 2-dimensional single crystalline boron nitride nanosheets (BNNSs) at a low substrate temperature for applications in high-performance deep UV photodetectors. The obtained sample consists of a large amount of BNNSs partially overlapping one another with random orientations. Each sheet is composed of a few (from 2 to 10) stacked atomic layers exhibiting high transparency due to its highly ordered hBN crystallinity. Deep UV detectors based on the obtained BNNSs were designed, fabricated, and tested. The bias and temperature effects on the photocurrent strength and the signal-to-noise ratio have been carefully characterized and discussed. A significant shift in the cut off wavelength of the BNNSs based photodetectors was observed suggesting a band gap reduction as a result of the BNNSs’ collective structure. The newly designed photodetector presented exceptional properties: a high sensitivity to weak intensities of radiation in both UVC and UVB range while remaining visible-blind, and a high signal-to-noise ratio operation even at temperatures as high as 400 °C. In addition, the BNNSs based photodetector exhibited potential for self-powered operation.

  1. Bulk-micromachined submicroliter-volume PCR chip with very rapid thermal response and low power consumption.

    PubMed

    Lee, Dae-Sik; Park, Se Ho; Yang, Haesik; Chung, Kwang-Hyo; Yoon, Tae Hwan; Kim, Sung-Jin; Kim, Kyuwon; Kim, Youn Tae

    2004-08-01

    The current paper describes the design, fabrication, and testing of a micromachined submicroliter-volume polymerase chain reaction (PCR) chip with a fast thermal response and very low power consumption. The chip consists of a bulk-micromachined Si component and hot-embossed poly(methyl methacrylate)(PMMA) component. The Si component contains an integral microheater and temperature sensor on a thermally well-isolated membrane, while the PMMA component contains a submicroliter-volume PCR chamber, valves, and channels. The micro hot membrane under the submicroliter-volume chamber is a silicon oxide/silicon nitride/silicon oxide (O/N/O) diaphragm with a thickness of 1.9 microm, resulting in a very low thermal mass. In experiments, the proposed chip only required 45 mW to heat the reaction chamber to 92 degrees C, the denaturation temperature of DNA, plus the heating and cooling rates are about 80 degrees C s(-1) and 60 degrees C s(-1), respectively. We validated, from the fluorescence results from DNA stained with SYBR Green I, that the proposed chip amplified the DNA from vector clone, containing tumor suppressor gene BRCA 1 (127 base pairs at 11th exon), after 30 thermal cycles of 3 s, 5 s, and 5 s at 92 degrees C, 55 degrees C, and 72 degrees C, respectively, in a 200 nL-volume chamber. As for specificity of DNA products, owing to difficulty in analyzing the very small volume PCR results from the micro chip, we vicariously employed the larger volume PCR products after cycling with the same sustaining temperatures as with the micro chip but with much slower ramping rates (3.3 degrees C s(-1) when rising, 2.5 degrees C s(-1) when cooling) within circa 20 minutes on a commercial PCR machine and confirmed the specificity to BRCA 1 (127 base pairs) with agarose gel electrophoresis. Accordingly, the fabricated micro chip demonstrated a very low power consumption and rapid thermal response, both of which are crucial to the development of a fully integrated and battery-powered

  2. Design and fabrication of micro-hotplates made on a polyimide foil: electrothermal simulation and characterization to achieve power consumption in the low mW range

    NASA Astrophysics Data System (ADS)

    Courbat, J.; Canonica, M.; Teyssieux, D.; Briand, D.; de Rooij, N. F.

    2011-01-01

    The design of ultra-low power micro-hotplates on a polyimide (PI) substrate supported by thermal simulations and characterization is presented. By establishing a method for the thermal simulation of very small scale heating elements, the goal of this study was to decrease the power consumption of PI micro-hotplates to a few milliwatts to make them suitable for very low power applications. To this end, the mean heat transfer coefficients in air of the devices were extracted by finite element analysis combined with very precise thermographic measurements. A simulation model was implemented for these hotplates to investigate both the influence of their downscaling and the bulk micromachining of the polyimide substrate to lower their power consumptions. Simulations were in very good agreement with the experimental results. The main parameters influencing significantly the power consumption at such dimensions were identified and guidelines were defined allowing the design of very small (15 × 15 µm) and ultra-low power heating elements (6 mW at 300 °C). These very low power heating structures enable the realization of flexible sensors, such as gas, flow or wind sensors, for applications in autonomous wireless sensors networks or RFID applications and make them compatible with large-scale production on foil such as roll-to-roll or printing processes.

  3. Lean consumption.

    PubMed

    Womack, James P; Jones, Daniel T

    2005-03-01

    During the past 20 years, the real price of most consumer goods has fallen worldwide, the variety of goods and the range of sales channels offering them have continued to grow, and product quality has steadily improved. So why is consumption often so frustrating? It doesn't have to be--and shouldn't be--the authors say. They argue that it's time to apply lean thinking to the processes of consumption--to give consumers the full value they want from goods and services with the greatest efficiency and the least pain. Companies may think they save time and money by off-loading work to the consumer but, in fact, the opposite is true. By streamlining their systems for providing goods and services, and by making it easier for customers to buy and use those products and services, a growing number of companies are actually lowering costs while saving everyone time. In the process, these businesses are learning more about their customers, strengthening consumer loyalty, and attracting new customers who are defecting from less user-friendly competitors. The challenge lies with the retailers, service providers, manufacturers, and suppliers that are not used to looking at total cost from the standpoint of the consumer and even less accustomed to working with customers to optimize the consumption process. Lean consumption requires a fundamental shift in the way companies think about the relationship between provision and consumption, and the role their customers play in these processes. It also requires consumers to change the nature of their relationships with the companies they patronize. Lean production has clearly triumphed over similar obstacles in recent years to become the dominant global manufacturing model. Lean consumption, its logical companion, can't be far behind.

  4. High-gain subnanowatt power consumption hybrid complementary logic inverter with WSe2 nanosheet and ZnO nanowire transistors on glass.

    PubMed

    Shokouh, Seyed Hossein Hosseini; Pezeshki, Atiye; Ali Raza, Syed Raza; Lee, Hee Sung; Min, Sung-Wook; Jeon, Pyo Jin; Shin, Jae Min; Im, Seongil

    2015-01-07

    A 1D-2D hybrid complementary logic inverter comprising of ZnO nanowire and WSe2 nanosheet field-effect transistors (FETs) is fabricated on glass, which shows excellent static and dynamic electrical performances with a voltage gain of ≈60, sub-nanowatt power consumption, and at least 1 kHz inverting speed.

  5. Numerical investigation of power consumption and mixing time in a stirred vessel with regular and multiscale impellers

    NASA Astrophysics Data System (ADS)

    Basbug, Salur; Papadakis, George; Vassilicos, Christos

    2015-11-01

    The flow field inside a stirred tank is obtained by means of direct numerical simulation based on finite volume method at Re =500. Two different types of four-bladed radial impellers are considered: the first one is a regular type with rectangular blades and the second one is a modified version of the former with irregular blade edges, having the same thickness and the surface area. The shaft power is averaged over more than sixty revolutions and the comparison between the two cases shows that the impeller with irregular blades has lower energy consumption. Moreover, a passive scalar is injected into the vessel for a quarter period of revolution and the scalar transport equation is solved to investigate the mixing times. The coefficient of variation of the passive scalar is averaged over the whole volume in order to obtain a quantitative indicator of the mixing progress. The homogenization curves depend on the instantaneous flow conditions due to the transient nature of the mixing process, therefore multiple curves are averaged to obtain a representative result. There are indications that irregular blades can decrease mixing time with respect to regular ones.

  6. Zero-Power-Consumption Solar-Blind Photodetector Based on β-Ga2O3/NSTO Heterojunction.

    PubMed

    Guo, Daoyou; Liu, Han; Li, Peigang; Wu, Zhenping; Wang, Shunli; Cui, Can; Li, Chaorong; Tang, Weihua

    2017-01-18

    A solar-blind photodetector based on β-Ga2O3/NSTO (NSTO = Nb:SrTiO3) heterojunctions were fabricated for the first time, and its photoelectric properties were investigated. The device presents a typical positive rectification in the dark, while under 254 nm UV light illumination, it shows a negative rectification, which might be caused by the generation of photoinduced electron-hole pairs in the β-Ga2O3 film layer. With zero bias, that is, zero power consumption, the photodetector shows a fast photoresponse time (decay time τd = 0.07 s) and the ratio Iphoto/Idark ≈ 20 under 254 nm light illumination with a light intensity of 45 μW/cm(2). Such behaviors are attributed to the separation of photogenerated electron-hole pairs driven by the built-in electric field in the depletion region of β-Ga2O3 and the NSTO interface, and the subsequent transport toward corresponding electrodes. The photocurrent increases linearly with increasing the light intensity and applied bias, while the response time decreases with the increase of the light intensity. Under -10 V bias and 45 μW/cm(2) of 254 nm light illumination, the photodetector exhibits a responsivity Rλ of 43.31 A/W and an external quantum efficiency of 2.1 × 10(4) %. The photo-to-electric conversion mechanism in the β-Ga2O3/NSTO heterojunction photodetector is explained in detail by energy band diagrams. The results strongly suggest that a photodetector based on β-Ga2O3 thin-film heterojunction structure can be practically used to detect weak solar-blind signals because of its high photoconductive gain.

  7. Energy resolution and power consumption of Timepix detector for different detector settings and saturation of front-end electronics

    NASA Astrophysics Data System (ADS)

    Kroupa, M.; Hoang, S.; Stoffle, N.; Soukup, P.; Jakubek, J.; Pinsky, L. S.

    2014-05-01

    An ongoing research project in the area of radiation monitoring employing the Timepix technology from the CERN-based Medipix2 Collaboration profits greatly from optimizing the precision of the position and energy information obtained for the detected quanta. Wider applications of the Timepix technology as a radiation monitor also puts new demands on the precision and speed of the energy calibration. We compare the analog signal in pixel front-end electronics for different sources used during detector evaluation and energy calibration. We use the direct measurement of the analog signal from the pixel preamplifier and comparator to characterize pulse shape differences for different sources, e.g. internal test pulses, external test pulses, ionizing radiation, etc. and study their interchangeability. Accurate per-pixel energy calibration of the Timepix detector enables the direct measurement of the energy deposited by different types of ionizing radiation. The energy calibration process requires the application of a known charge to front-end electronics of each pixel. The small pixel size limits use of the radioactive sources. The 59.54 keV line from 241Am is commonly used as the highest point in calibration curve. The heavy ion dosimetry as encountered in the space radiation environment requires a considerable extrapolation to the energies in the MeV range. We have observed that for energies around and beyond 1 MeV the response of the Timepix's front-end electronics no longer follows the extrapolated calibration function. We have investigated this non-linearity and identified its source. We also propose both hardware and software solutions to suppress this effect. In this paper we show the impact on pixel calibration and the subsequent energy resolution for different detector settings as well as the resulting power consumptions. We discuss the parameter optimization for several different real-world applications.

  8. The Course of Actualization

    ERIC Educational Resources Information Center

    De Smet, Hendrik

    2012-01-01

    Actualization is traditionally seen as the process following syntactic reanalysis whereby an item's new syntactic status manifests itself in new syntactic behavior. The process is gradual in that some new uses of the reanalyzed item appear earlier or more readily than others. This article accounts for the order in which new uses appear during…

  9. Mechanism of power consumption inhibitive multi-layer Zn:SiO{sub 2}/SiO{sub 2} structure resistance random access memory

    SciTech Connect

    Zhang, Rui; Lou, Jen-Chung; Tsai, Tsung-Ming E-mail: tcchang@mail.phys.nsysu.edu.tw; Chang, Kuan-Chang; Huang, Syuan-Yong; Shih, Chih-Cheng; Pan, Jhih-Hong; Tung, Cheng-Wei; Chang, Ting-Chang E-mail: tcchang@mail.phys.nsysu.edu.tw; Chen, Kai-Huang; Young, Tai-Fa; Chen, Hsin-Lu; Chen, Jung-Hui; Chen, Min-Chen; Syu, Yong-En; Sze, Simon M.

    2013-12-21

    In this paper, multi-layer Zn:SiO{sub 2}/SiO{sub 2} structure is introduced to reduce the operation power consumption of resistive random access memory (RRAM) device by modifying the filament formation process. And the configuration of multi-layer Zn:SiO{sub 2}/SiO{sub 2} structure is confirmed and demonstrated by auger electron spectrum. Material analysis together with conduction current fitting is applied to qualitatively evaluate the carrier conduction mechanism on both low resistance state and high resistance state. Finally, single layer and multilayer conduction models are proposed, respectively, to clarify the corresponding conduction characteristics of two types of RRAM devices.

  10. Improving Read Disturb Characteristics by Using Double Common Source Line and Dummy Switch Architecture in Multi Level Cell NAND Flash Memory with Low Power Consumption

    NASA Astrophysics Data System (ADS)

    Kang, Myounggon; Park, Ki-Tae; Song, Youngsun; Lim, Youngho; Suh, Kang-Deog; Shin, Hyungcheol

    2011-04-01

    Two new NAND structures using double common source line (CSL) and dummy switch and their read operation schemes as a solution for NAND flash memories have been proposed. Compared with conventional scheme, the proposed read schemes improves read disturb characteristics beyond sub-30 nm technology node. By using proposed read scheme, the number of fail bits of proposed NAND was decreased than those of conventional NAND at read cycles. Also, it was proven that they contribute to improve the performance and suppress the power consumption. The proposed NAND was verified by both simulation and experimental measurements in a fabricated 40 nm multi level cell (MLC) NAND device.

  11. 10 CFR Appendix Z to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of External Power Supplies

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... it. (Reference for guidance only, see IEEE Standard 1515-2000, 4.3.1.1, § 430.4.) c. Active power... IEEE Standard 100. (Reference for guidance only, see § 430.4.) a. Active mode means the mode of... multiple-voltage external power supply). b. Active mode efficiency is the ratio, expressed as a...

  12. 10 CFR Appendix Z to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of External Power Supplies

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... multiple-voltage external power supply). b. Active mode efficiency is the ratio, expressed as a percentage..., “General Conditions for Measurement,” of the CEC's “Test Method for Calculating the Energy Efficiency of... separately powered fans, air conditioners, or heat sinks. The UUT shall be conditioned, rested, and tested...

  13. 10 CFR Appendix Z to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of External Power Supplies

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... multiple-voltage external power supply). b. Active mode efficiency is the ratio, expressed as a percentage..., “General Conditions for Measurement,” of the CEC's “Test Method for Calculating the Energy Efficiency of... separately powered fans, air conditioners, or heat sinks. The UUT shall be conditioned, rested, and tested...

  14. 10 CFR Appendix Z to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of External Power Supplies

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... multiple-voltage external power supply). b. Active mode efficiency is the ratio, expressed as a percentage..., “General Conditions for Measurement,” of the CEC's “Test Method for Calculating the Energy Efficiency of... separately powered fans, air conditioners, or heat sinks. The UUT shall be conditioned, rested, and tested...

  15. Revealing Water Stress by the Thermal Power Industry in China Based on a High Spatial Resolution Water Withdrawal and Consumption Inventory.

    PubMed

    Zhang, Chao; Zhong, Lijin; Fu, Xiaotian; Wang, Jiao; Wu, Zhixuan

    2016-02-16

    This study reveals the spatial distribution of water withdrawal and consumption by thermal power generation and the associated water stress at catchment level in China based on a high-resolution geodatabase of electric generating units and power plants. We identified three groups of regions where the baseline water stress exerted by thermal power generation is comparatively significant: (1) the Hai River Basin/East Yellow River Basin in the north; (2) some arid catchments in Xinjiang Autonomous Region in the northwest; and (3) the coastal city clusters in the Yangtze River Delta, Pearly River Delta, and Zhejiang Province. Groundwater stress is also detected singularly in a few aquifers mainly in the Hai River Basin and the lower reaches of the Yellow River Basin. As China accelerates its pace of coal mining and coal-fired power generation in the arid northwest regions, the energy/water priorities in catchments under high water stress are noteworthy. We conclude that promotion of advanced water-efficient technologies in the energy industry and more systematic analysis of the water stress of thermal power capacity expansion in water scarce regions in inland China are needed. More comprehensive and transparent data monitoring and reporting are essential to facilitate such water stress assessment.

  16. Investigation of thermal resistance and power consumption in Ga-doped indium oxide (In{sub 2}O{sub 3}) nanowire phase change random access memory

    SciTech Connect

    Jin, Bo; Lee, Jeong-Soo E-mail: ljs6951@postech.ac.kr; Lim, Taekyung; Ju, Sanghyun; Latypov, Marat I.; Pi, Dong-Hai; Seop Kim, Hyoung; Meyyappan, M. E-mail: ljs6951@postech.ac.kr

    2014-03-10

    The resistance stability and thermal resistance of phase change memory devices using ∼40 nm diameter Ga-doped In{sub 2}O{sub 3} nanowires (Ga:In{sub 2}O{sub 3} NW) with different Ga-doping concentrations have been investigated. The estimated resistance stability (R(t)/R{sub 0} ratio) improves with higher Ga concentration and is dependent on annealing temperature. The extracted thermal resistance (R{sub th}) increases with higher Ga-concentration and thus the power consumption can be reduced by ∼90% for the 11.5% Ga:In{sub 2}O{sub 3} NW, compared to the 2.1% Ga:In{sub 2}O{sub 3} NW. The excellent characteristics of Ga-doped In{sub 2}O{sub 3} nanowire devices offer an avenue to develop low power and reliable phase change random access memory applications.

  17. 100 nm AlSb/InAs HEMT for Ultra-Low-Power Consumption, Low-Noise Applications

    PubMed Central

    Bagumako, Sonia; Desplanque, Ludovic; Wichmann, Nicolas; Bollaert, Sylvain; Danneville, François; Wallart, Xavier

    2014-01-01

    We report on high frequency (HF) and noise performances of AlSb/InAs high electron mobility transistor (HEMT) with 100 nm gate length at room temperature in low-power regime. Extrinsic cut-off frequencies fT/fmax of 100/125 GHz together with minimum noise figure NFmin = 0.5 dB and associated gain Gass = 12 dB at 12 GHz have been obtained at drain bias of only 80 mV, corresponding to 4 mW/mm DC power dissipation. This demonstrates the great ability of AlSb/InAs HEMT for high-frequency operation combined with low-noise performances in ultra-low-power regime. PMID:24707193

  18. Rebalancing of internally generated carriers for mid-infrared interband cascade lasers with very low power consumption.

    PubMed

    Vurgaftman, I; Bewley, W W; Canedy, C L; Kim, C S; Kim, M; Merritt, C D; Abell, J; Lindle, J R; Meyer, J R

    2011-12-13

    The interband cascade laser differs from any other class of semiconductor laser, conventional or cascaded, in that most of the carriers producing population inversion are generated internally, at semimetallic interfaces within each stage of the active region. Here we present simulations demonstrating that all previous interband cascade laser performance has suffered from a significant imbalance of electron and hole densities in the active wells. We further confirm experimentally that correcting this imbalance with relatively heavy n-type doping in the electron injectors substantially reduces the threshold current and power densities relative to all earlier devices. At room temperature, the redesigned devices require nearly two orders of magnitude less input power to operate in continuous-wave mode than the quantum cascade laser. The interband cascade laser is consequently the most attractive option for gas sensing and other spectroscopic applications requiring low output power and minimum heat dissipation at wavelengths extending from 3 μm to beyond 6 μm.

  19. 100 nm AlSb/InAs HEMT for ultra-low-power consumption, low-noise applications.

    PubMed

    Gardès, Cyrille; Bagumako, Sonia; Desplanque, Ludovic; Wichmann, Nicolas; Bollaert, Sylvain; Danneville, François; Wallart, Xavier; Roelens, Yannick

    2014-01-01

    We report on high frequency (HF) and noise performances of AlSb/InAs high electron mobility transistor (HEMT) with 100 nm gate length at room temperature in low-power regime. Extrinsic cut-off frequencies fT/f max of 100/125 GHz together with minimum noise figure NF(min) = 0.5 dB and associated gain G(ass) = 12 dB at 12 GHz have been obtained at drain bias of only 80 mV, corresponding to 4 mW/mm DC power dissipation. This demonstrates the great ability of AlSb/InAs HEMT for high-frequency operation combined with low-noise performances in ultra-low-power regime.

  20. 10 CFR Appendix Z to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of External Power Supplies

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... IEEE Standard 100. (Reference for guidance only, see § 430.4.) a. Active mode means the mode of... it. (Reference for guidance only, see IEEE Standard 1515-2000, 4.3.1.1, § 430.4.) c. Active power... period. (Reference for guidance only, see IEEE Standard 1515-2000, § 430.4.) d. Ambient temperature...

  1. Low power consumption high speed CMOS dual-modulus 15/16 prescaler for optical and wireless communications

    NASA Astrophysics Data System (ADS)

    Liu, Hui-Min; Zhang, Xiao-Xing; Dai, Yu-Jie; Lv, Ying-Jie

    2011-09-01

    Frequency synthesizer is an important part of optical and wireless communication system. Low power comsumption prescaler is one of the most critical unit of frequency synthesizer. For the frequency divider, it must be programmable for channel selection in multi-channel communication systems. A dual-modulus prescaler (DMP) is needed to provide variable division ratios. DMP is considered as a critical power dissipative block since it always operates at full speed. This paper introduces a high speed and low power complementary metal oxide semiconductor (CMOS) 15/16 DMP based on true single-phase-clock (TSPC) and transmission gates (TGs) cell. A conventional TSPC is optimized in terms of devices size, and it is resimulated. The TSPC is used in the synchronous and asynchronous counter. TGs are used in the control logic. The DMP circuit is implemented in 0.18 μm CMOS process. The simulation results are provided. The results show wide operating frequency range from 7.143 MHz to 4.76 GHz and it comsumes 3.625 mW under 1.8 V power supply voltage at 4.76 GHz.

  2. 10 CFR Appendix V to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan Light Kits

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of Ceiling Fan Light Kits V Appendix V to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY... Appendix V to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan... of ceiling fan light kits. 2. Definitions: a. Input power means the actual total power used by...

  3. 10 CFR Appendix V to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan Light Kits

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... of Ceiling Fan Light Kits V Appendix V to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY... Appendix V to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan... of ceiling fan light kits. 2. Definitions: a. Input power means the actual total power used by...

  4. 10 CFR Appendix V to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan Light Kits

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of Ceiling Fan Light Kits V Appendix V to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY... Appendix V to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Ceiling Fan... of ceiling fan light kits. 2. Definitions: a. Input power means the actual total power used by...

  5. Low Power Consumption Lasers for Next Generation Miniature Optical Spectrometers for Major Constituent and Trace Gas Analysis

    NASA Technical Reports Server (NTRS)

    Forouhar, Siamak; Soibel, Alexander; Frez, Clifford; Qiu, Yueming; Chen, J.; Hosoda, T.; Kipshidze, G.; Shterengas, L.; Tsvid, G.; Belenky, G.; Franz, Kale J.; Gmachl, Claire; Scherer, Benjamin

    2010-01-01

    The air quality of any manned spacecraft needs to be continuously monitored in order to safeguard the health of the crew. Air quality monitoring grows in importance as mission duration increases. Due to the small size, low power draw, and performance reliability, semiconductor laser-based instruments are viable candidates for this purpose. The minimum instrument size requires lasers with emission wavelength coinciding with the absorption of the fundamental frequency of the target gases which are mostly in the 3.0-5.0 micrometers wavelength range. In this paper we report on our progress developing high wall plug efficiency type-I quantum-well GaSb-based diode lasers operating at room temperatures in the spectral region near 3.0-3.5 micrometers and quantum cascade (QC) lasers in the 4.0-5.0 micrometers range. These lasers will enable the development of miniature, low-power laser spectrometers for environmental monitoring of the spacecraft.

  6. High-Performance electronics at ultra-low power consumption for space applications: From superconductor to nanoscale semiconductor technology

    NASA Technical Reports Server (NTRS)

    Duncan, Robert V.; Simmons, Jerry; Kupferman, Stuart; McWhorter, Paul; Dunlap, David; Kovanis, V.

    1995-01-01

    A detailed review of Sandia's work in ultralow power dissipation electronics for space flight applications, including superconductive electronics, new advances in quantum well structures, and ultra-high purity 3-5 materials, and recent advances in micro-electro-optical-mechanical systems (MEMS) is presented. The superconductive electronics and micromechanical devices are well suited for application in micro-robotics, micro-rocket engines, and advanced sensors.

  7. The Effect of Cadence on Shank Muscle Oxygen Consumption and Deoxygenation in Relation to Joint Specific Power and Cycling Kinematics

    PubMed Central

    Ettema, Gertjan; van Beekvelt, Mireille

    2017-01-01

    The purpose of the present study was to investigate the effect of cadence on joint specific power and cycling kinematics in the ankle joint in addition to muscle oxygenation and muscle VO2 in the gastrocnemius and tibialis anterior. Thirteen cyclists cycled at a cadence of 60, 70, 80, 90, 100 and 110 rpm at a constant external work rate of 160.1 ± 21.3 W. Increasing cadence led to a decrease in ankle power in the dorsal flexion phase and to an increase in ankle joint angular velocity above 80 rpm. In addition, increasing cadence increased deoxygenation and desaturation for both the gastrocnemius and tibialis anterior muscles. Muscle VO2 increased following increased cadence but only in the tibialis anterior and only at cadences above 80 rpm, thus coinciding with the increase in ankle joint angular velocity. There was no effect of cadence in the gastrocnemius. This study demonstrates that high cadences lead to increased mVO2 in the TA muscles that cannot be explained by power in the dorsal flexion phase. PMID:28060894

  8. Fast response and low power consumption 1×2 thermo-optic switch based on dielectric-loaded surface plasmon polariton waveguides

    NASA Astrophysics Data System (ADS)

    Qi, Zhipeng; Hu, Guohua; Yun, Binfeng; Zhang, Xiong; Cui, Yiping

    2016-08-01

    In this paper, we present a 1 × 2 thermo-optic (TO) switch based on the integration of the dielectric-loaded surface plasmon polariton (SPP) waveguides with the silicon nanowires. Liquid-curable fluorinated resin (LFR) made of perfluorinated polymer was adopted as the ridge, which has a TO coefficient twice more than that of polymethyl methacrylate, leading to a significant decrease in the power consumption. It was shown that the response time of the dielectric-loaded SPP waveguide could be improved through optimizing the dimensions of the LFR polymer ridge without loss of relative high figure of merit and large confinement factor. Performance characteristics of such a 1 × 2 TO switch operating at a telecom wavelength of 1550 nm was investigated theoretically from the analysis of both heat and optical fields. The results reveal that a switching power as low as 7 mW and an extremely short switching time (with rise time of 3 μs and fall time of 6.7 μs) could be achieved with the proposed dielectric-loaded SPP-based 1 × 2 TO switch. In addition, the crosstalk could be enhanced to at least 40 dB with the applied power of 7 mW at the wavelength of 1550 nm, and it could be retained to be above 20 dB in the wavelength spectrum of 1500-1600 nm during the on/off state.

  9. Experimental investigation of the flow field and power consumption characteristics of regular and fractal blade impellers in a dynamic mixer

    NASA Astrophysics Data System (ADS)

    Steiros, K.; Bruce, P. J. K.; Buxton, O. R. H.; Vassilicos, J. C.

    2015-11-01

    Experiments have been performed in an octagonal un-baffled water tank, stirred by three radial turbines with different geometry impellers: (1) regular rectangular blades; (2) single-iteration fractal blades; (3) two-iteration fractal blades. Shaft torque was monitored and the power number calculated for each case. Both impellers with fractal geometry blades exhibited a decrease of turbine power number compared to the regular one (15% decrease for single-iteration and 19% for two iterations). Phase locked PIV in the discharge region of the blades revealed that the vortices emanating from the regular blades are more coherent, have higher kinetic energy, and advect faster towards the tank's walls where they are dissipated, compared to their fractal counterparts. This suggests a strong link between vortex production and behaviour and the energy input for the different impellers. Planar PIV measurements in the bulk of the tank showed an increase of turbulence intensity of over 20% for the fractal geometry blades, suggesting higher mixing efficiency. Experiments with pressure measurements on the different geometry blade surfaces are ongoing to investigate the distribution of forces, and calculate hydrodynamic centres of pressure. The authors would like to acknowledge the financial support given by European Union FP7 Marie Curie MULTISOLVE project (Grant Agreement No. 317269).

  10. Compact CH{sub 4} sensor system based on a continuous-wave, low power consumption, room temperature interband cascade laser

    SciTech Connect

    Dong, Lei; Li, Chunguang; Gluszek, Aleksander K.; Tittel, Frank K.; Sanchez, Nancy P.; Griffin, Robert J.

    2016-01-04

    A tunable diode laser absorption spectroscopy-based methane sensor, employing a dense-pattern multi-pass gas cell and a 3.3 μm, CW, DFB, room temperature interband cascade laser (ICL), is reported. The optical integration based on an advanced folded optical path design and an efficient ICL control system with appropriate electrical power management resulted in a CH{sub 4} sensor with a small footprint (32 × 20 × 17 cm{sup 3}) and low-power consumption (6 W). Polynomial and least-squares fit algorithms are employed to remove the baseline of the spectral scan and retrieve CH{sub 4} concentrations, respectively. An Allan-Werle deviation analysis shows that the measurement precision can reach 1.4 ppb for a 60 s averaging time. Continuous measurements covering a seven-day period were performed to demonstrate the stability and robustness of the reported CH{sub 4} sensor system.

  11. Electrical appliance energy consumption control methods and electrical energy consumption systems

    DOEpatents

    Donnelly, Matthew K.; Chassin, David P.; Dagle, Jeffery E.; Kintner-Meyer, Michael; Winiarski, David W.; Pratt, Robert G.; Boberly-Bartis, Anne Marie

    2006-03-07

    Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

  12. Electrical appliance energy consumption control methods and electrical energy consumption systems

    DOEpatents

    Donnelly, Matthew K.; Chassin, David P.; Dagle, Jeffery E.; Kintner-Meyer, Michael; Winiarski, David W.; Pratt, Robert G.; Boberly-Bartis, Anne Marie

    2008-09-02

    Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

  13. Effects of light-emitting diodes under capped daily energy consumption with combinations of electric power and photoperiod on cultivation of Chlorella pyrenoidosa.

    PubMed

    Li, Jinhao; Bin, Hui; Lin, Jian; Chen, Feng; Miao, Xiaoling

    2016-04-01

    Effects of white light-emitting diodes (LEDs) with different light intensities at photoperiod of 18:6h on Chlorella pyrenoidosa growth were investigated. The microalgae exhibited the highest growth rate 89.0mgL(-1)d(-1) and growth efficiency 97.8mgL(-1)KWh(-1) at 110 and 90μmolm(-2)s(-1), respectively. Based on the discovery of this asynchronous phenomenon between growth rate and growth efficiency, influences of LEDs (red, blue and white) under capped daily energy consumption (0.80KWh d(-1)) with combinations of electric power (33.3, 44.4 and 66.6w) and photoperiod (24:0, 18:6 and 12:12h) were further investigated. The highest growth efficiency 106.4mgL(-1)KWh(-1) and growth rate 85.1mgL(-1)d(-1) were both obtained under white-33.3w-24h. Growth efficiency and growth rate were simultaneously improved 1.1 times through this method above. The order of growth efficiency under different LEDs were white>blue>red.

  14. Development of a bidirectional transcutaneous optical data transmission system for artificial hearts allowing long-distance data communication with low electric power consumption.

    PubMed

    Okamoto, Eiji; Yamamoto, Yoshiro; Inoue, Yusuke; Makino, Tsutomu; Mitamura, Yoshinori

    2005-01-01

    We have developed a wavelength division bidirectional transcutaneous optical data transmission system using amplitude shift keying (ASK) modulation. The bidirectional optical data transmission system consists of two kinds of light emitting diodes (LEDs) having different wavelengths and an ASK modulator and demodulator. Two narrow directional visible LEDs with a peak output wavelength of 590 nm were used to transmit data from inside the body to outside the body, and a narrow directional near-infrared LED with a peak output wavelength of 940 nm was used for transmission from outside the body to inside the body. The ASK modulator employs a carrier pulse signal (50 kHz) to support a maximum data transmission rate of 9600 bps. An in vitro experiment showed that the maximum tissue thickness of near-infrared optical data transmission without error was 45 mm; the figure was 20 mm for visible optical data transmission. There was no interference between the signals under full-duplex data transmission. Electric power consumption for the data transmission links was 122 mW for near-infrared light and 162 mW (81 mW x 2) for visible light. From the above results, a bidirectional transcutaneous optical data transmission system promises adequate performance for monitoring and control of an artificial heart.

  15. Reducing theatre energy consumption.

    PubMed

    Pierce, Tom; Morris, Gemma; Parker, Beena

    2014-03-01

    As little has been written to describe the electrical energy required to deliver anaesthesia, we undertook to measure the total electrical energy consumption for a day's clinical anaesthesia. Daily energy consumption related to anaesthesia was measured with commercially available 'plug-in' power and energy meters, and additional in-use energy estimates were based on direct observation made in theatre and from measuring the power consumption of anaesthetic gas scavenging system (AGSS) pumps. Total energy use for anaesthesia per day was 28 kWh, and cost the modest sum of around pound 2.24 per day. Disproportionately large amounts of energy were required to run the anaesthetic gas scavenging pumps and the overhead radiant heaters. Energy saving can be safely obtained by switching off AGSS out of hours, and placing radiant heaters on timing or thermostatic controls.

  16. Electrical power consumption of the emitter for a non-guided optoelectronic link Optimisation de la consommation électrique d'un émetteur pour une liaison optoélectronique non-guidée

    NASA Astrophysics Data System (ADS)

    Benaouda, A.; Lescure, M.; Bensalah, R.

    1998-02-01

    The aim of this paper is to determine the best value of the signal-to-noise ratio (SNR) for a non-guided optoelectronic link with minimum electrical power consumption by the emitter. Transmitter structures have been analysed and optimized as a function of the bit error rate (BER) of the link in order to give either the highest autonomy or a lower number of emitter components. The application requirement for the transmitter is consequently to offer a flexible and secure communication solution. The transmitter provides non-guided infrared communication inside a limited cell size. The thermal effects, the rise and fall times of the optical power output of the emission and the characteristics of component devices have been taken into consideration in order to evaluate the SNR. We demonstrate that, for a given electrical consumption, the emitted optical power of the transmitter circuit increases with the logarithm of the total number of light emitting diodes.

  17. Effect of impeller type and mechanical agitation on the mass transfer and power consumption aspects of ASBR operation treating synthetic wastewater.

    PubMed

    Michelan, Rogério; Zimmer, Thiago R; Rodrigues, José A D; Ratusznei, Suzana M; de Moraes, Deovaldo; Zaiat, Marcelo; Foresti, Eugenio

    2009-03-01

    The effect of flow type and rotor speed was investigated in a round-bottom reactor with 5 L useful volume containing 2.0 L of granular biomass. The reactor treated 2.0 L of synthetic wastewater with a concentration of 800 mgCOD/L in 8-h cycles at 30 degrees C. Five impellers, commonly used in biological processes, have been employed to this end, namely: a turbine and a paddle impeller with six-vertical-flat-blades, a turbine and a paddle impeller with six-45 degrees -inclined-flat-blades and a three-blade-helix impeller. Results showed that altering impeller type and rotor speed did not significantly affect system stability and performance. Average organic matter removal efficiency was about 84% for filtered samples, total volatile acids concentration was below 20 mgHAc/L and bicarbonate alkalinity a little less than 400 mgCaCO3/L for most of the investigated conditions. However, analysis of the first-order kinetic model constants showed that alteration in rotor speed resulted in an increase in the values of the kinetic constants (for instance, from 0.57 h(-1) at 50 rpm to 0.84 h(-1) at 75 rpm when the paddle impeller with six-45 degrees -inclined-flat-blades was used) and that axial flow in mechanically stirred reactors is preferable over radial-flow when the vertical-flat-blade impeller is compared to the inclined-flat-blade impeller (for instance at 75 rpm, from 0.52 h(-1) with the six-flat-blade-paddle impeller to 0.84 h(-1) with the six-45 degrees -inclined-flat-blade-paddle impeller), demonstrating that there is a rotor speed and an impeller type that maximize solid-liquid mass transfer in the reaction medium. Furthermore, power consumption studies in this reduced reactor volume showed that no high power transfer is required to improve mass transfer (less than 0.6 kW/10(3)m3).

  18. Mercury and other trace elements in Ohio River fish collected near coal-fired power plants: Interspecific patterns and consideration of consumption risks.

    PubMed

    Reash, Robin J; Brown, Lauren; Merritt, Karen

    2015-07-01

    Many coal-fired electric generating facilities in the United States are discharging higher loads of Hg, Se, and other chemicals to receiving streams due to the installation of flue gas desulfurization (FGD) air pollution control units. There are regulatory concerns about the potential increased uptake of these bioaccumulative trace elements into food webs. We evaluated the concentrations of As, total Hg (THg), methylmercury (MeHg), and Se in Ohio River fish collected proximal to coal-fired power plants, of which 75% operate FGD systems. Fillet samples (n = 50) from 6 fish species representing 3 trophic levels were analyzed. Geometric mean fillet concentrations of THg (wet wt), MeHg (wet wt), and Se (dry wt) in 3 species were 0.136, 0.1181, and 3.19 mg/kg (sauger); 0.123, 0.1013, and 1.56 mg/kg (channel catfish); and 0.127, 0.0914, and 3.30 mg/kg (hybrid striped bass). For all species analyzed, only 3 fillet samples (6% of total) had MeHg concentrations that exceeded the US Environmental Protection Agency (USEPA) human health criterion (0.3 mg/kg wet wt); all of these were freshwater drum aged ≥ 19 y. None of the samples analyzed exceeded the USEPA proposed muscle and whole body Se thresholds for protection against reproductive effects in freshwater fish. All but 8 fillet samples had a total As concentration less than 1.0 mg/kg dry wt. Mean Se health benefit values (HBVSe ) for all species were ≥ 4, indicating that potential Hg-related health risks associated with consumption of Ohio River fish are likely to be offset by adequate Se concentrations. Overall, we observed no measurable evidence of enhanced trace element bioaccumulation associated with proximity to power plant FGD facilities, however, some enhanced bioaccumulation could have occurred in the wastewater mixing zones. Furthermore, available evidence indicates that, due to hydraulic and physical factors, the main stem Ohio River appears to have low net Hg methylation potential.

  19. Linguistic Theory and Actual Language.

    ERIC Educational Resources Information Center

    Segerdahl, Par

    1995-01-01

    Examines Noam Chomsky's (1957) discussion of "grammaticalness" and the role of linguistics in the "correct" way of speaking and writing. It is argued that the concern of linguistics with the tools of grammar has resulted in confusion, with the tools becoming mixed up with the actual language, thereby becoming the central…

  20. Determinants of Fast Food Consumption among Iranian High School Students Based on Planned Behavior Theory

    PubMed Central

    Sharifirad, Gholamreza; Yarmohammadi, Parastoo; Azadbakht, Leila; Morowatisharifabad, Mohammad Ali; Hassanzadeh, Akbar

    2013-01-01

    Objective. This study was conducted to identify some factors (beliefs and norms) which are related to fast food consumption among high school students in Isfahan, Iran. We used the framework of the theory planned behavior (TPB) to predict this behavior. Subjects & Methods. Cross-sectional data were available from high school students (n = 521) who were recruited by cluster randomized sampling. All of the students completed a questionnaire assessing variables of standard TPB model including attitude, subjective norms, perceived behavior control (PBC), and the additional variables past behavior, actual behavior control (ABC). Results. The TPB variables explained 25.7% of the variance in intentions with positive attitude as the strongest (β = 0.31, P < 0.001) and subjective norms as the weakest (β = 0.29, P < 0.001) determinant. Concurrently, intentions accounted for 6% of the variance for fast food consumption. Past behavior and ABC accounted for an additional amount of 20.4% of the variance in fast food consumption. Conclusion. Overall, the present study suggests that the TPB model is useful in predicting related beliefs and norms to the fast food consumption among adolescents. Subjective norms in TPB model and past behavior in TPB model with additional variables (past behavior and actual behavior control) were the most powerful predictors of fast food consumption. Therefore, TPB model may be a useful framework for planning intervention programs to reduce fast food consumption by students. PMID:23936635

  1. Life cycle greenhouse gas emissions and freshwater consumption of Marcellus shale gas.

    PubMed

    Laurenzi, Ian J; Jersey, Gilbert R

    2013-05-07

    We present results of a life cycle assessment (LCA) of Marcellus shale gas used for power generation. The analysis employs the most extensive data set of any LCA of shale gas to date, encompassing data from actual gas production and power generation operations. Results indicate that a typical Marcellus gas life cycle yields 466 kg CO2eq/MWh (80% confidence interval: 450-567 kg CO2eq/MWh) of greenhouse gas (GHG) emissions and 224 gal/MWh (80% CI: 185-305 gal/MWh) of freshwater consumption. Operations associated with hydraulic fracturing constitute only 1.2% of the life cycle GHG emissions, and 6.2% of the life cycle freshwater consumption. These results are influenced most strongly by the estimated ultimate recovery (EUR) of the well and the power plant efficiency: increase in either quantity will reduce both life cycle freshwater consumption and GHG emissions relative to power generated at the plant. We conclude by comparing the life cycle impacts of Marcellus gas and U.S. coal: The carbon footprint of Marcellus gas is 53% (80% CI: 44-61%) lower than coal, and its freshwater consumption is about 50% of coal. We conclude that substantial GHG reductions and freshwater savings may result from the replacement of coal-fired power generation with gas-fired power generation.

  2. The search of the best mode of the reserve power supply consumption during the nuclear reactor’s emergency shutdown procedures in case of force majeure circumstances

    NASA Astrophysics Data System (ADS)

    Zagrebaev, A. M.; Trifonenkov, A. V.

    2017-01-01

    This article deals with the problem of the control mode choice for a power supply system in case of force majeure circumstances. It is not known precisely, when a force majeure incident occurs, but the threatened period is given, when the incident is expected. It is supposed, that force majeure circumstances force nuclear reactor shutdown at the moment of threat coming. In this article the power supply system is considered, which consists of a nuclear reactor and a reserve power supply, for example, a hydroelectric pumped storage power station. The reserve power supply has limited capacity and it doesn’t undergo the threatened incident. The problem of the search of the best reserve supply time-distribution in case of force majeure circumstances is stated. The search is performed according to minimization of power loss and damage to the infrastructure. The software has been developed, which performs automatic numerical search of the approximate optimal control modes for the reserve power supply.

  3. How People Actually Use Thermostats

    SciTech Connect

    Meier, Alan; Aragon, Cecilia; Hurwitz, Becky; Mujumdar, Dhawal; Peffer, Therese; Perry, Daniel; Pritoni, Marco

    2010-08-15

    Residential thermostats have been a key element in controlling heating and cooling systems for over sixty years. However, today's modern programmable thermostats (PTs) are complicated and difficult for users to understand, leading to errors in operation and wasted energy. Four separate tests of usability were conducted in preparation for a larger study. These tests included personal interviews, an on-line survey, photographing actual thermostat settings, and measurements of ability to accomplish four tasks related to effective use of a PT. The interviews revealed that many occupants used the PT as an on-off switch and most demonstrated little knowledge of how to operate it. The on-line survey found that 89% of the respondents rarely or never used the PT to set a weekday or weekend program. The photographic survey (in low income homes) found that only 30% of the PTs were actually programmed. In the usability test, we found that we could quantify the difference in usability of two PTs as measured in time to accomplish tasks. Users accomplished the tasks in consistently shorter times with the touchscreen unit than with buttons. None of these studies are representative of the entire population of users but, together, they illustrate the importance of improving user interfaces in PTs.

  4. Extremely low losses 14xx single mode laser diode leading to 550-mW output power module with 0-75°C case temperature and 10-W consumption

    NASA Astrophysics Data System (ADS)

    Burie, J.-R.; Garabedian, P.; Starck, C.; Pagnod-Rossiaux, P.; Bettiati, M.; Do Nascimento, M.; Reygrobellet, J.-N.; Bertreux, J.-C.; Laruelle, F.

    2012-03-01

    High power 14xx laser pumps are more and more required for eye safe industrial, medical, safety and defense applications as well as for increased telecom network capability (e.g. for 100 Gb Ethernet). However, this need of high power requires to control the overall power consumption in a range in line with systems requirements. In this respect, 3S PHOTONICS has developed a 14xx nm single mode laser diode with record internal losses of 1.5 cm-1 compared to the 2.7 cm-1 reported up to now. These lasers are based on p/nBH technology and use the asymmetric waveguide concept to reduce internal losses. The record loss value, coupled to an internal efficiency higher than 0.8, allows realization lasers of 3 mm length with external efficiency higher than 0.5 W.A-1 at 25°C in AR/HR coating configuration. Modules using direct coupling technology were realized. High coupling efficiency is obtained thanks to the 8° x 14° far field pattern of the diode. Output power of 550 mW at 1.8 A is thus obtained, with or without FBG stabilization, with maximum output power above 700mW. Thanks to the lasers' length, voltage at this current level is below 1.9 V, which gives a reduced thermal load. Thus, the overall modules electrical consumption remains lower than 10 W at case temperatures ranging from 0°C to 75°C. The 3 mm length also guaranties high reliability of these laser diodes.

  5. Developing a high-resolution vehicular emission inventory by integrating an emission model and a traffic model: Part 1--Modeling fuel consumption and emissions based on speed and vehicle-specific power.

    PubMed

    Wang, Haikun; Fu, Lixin

    2010-12-01

    To improve the accuracy and applicability of vehicular emission models, this study proposes a speed and vehicle-specific power (VSP) modeling method to estimate vehicular emissions and fuel consumption using data gathered by a portable emissions monitoring system (PEMS). The PEMS data were categorized into discrete speed-VSP bins on the basis of the characteristics of vehicle driving conditions and emissions in Chinese cities. Speed-VSP modal average rates of emissions (or fuel consumption) and the time spent in the corresponding speed-VSP bins were then used to calculate the total trip emissions (or fuel consumption) and emission factors (or fuel economy) under specific average link speeds. The model approach was validated by comparing it against measured data with prediction errors within 20% for trip emissions and link-speed-based emission factors. This analysis is based on the data of light-duty gasoline vehicles in China; however, this research approach could be generalized to other vehicle fleets in other countries. This modeling method could also be coupled with traffic demand models to establish high-resolution emissions inventories and evaluate the impacts of traffic-related emission control measures.

  6. Compact, low power consumption methane sensor based on a novel miniature multipass gas cell and a CW, room temperature interband cascade laser emitting at 3.3 μm

    NASA Astrophysics Data System (ADS)

    Dong, Lei; Li, Chunguang; Sanchez, Nancy P.; Gluszek, Aleksander K.; Griffin, Robert J.; Tittel, Frank K.

    2016-02-01

    A tunable diode laser absorption spectroscopy (TDLAS)-based methane sensor, employing a miniature dense-pattern multi-pass gas cell (MPGC) and a continuous wave, room temperature interband cascade laser (ICL), is reported. The optical integration based on an advanced folded optical path design and an efficient ICL control system with appropriate electrical power management results in a methane sensor with a small footprint (32 × 20 × 17 cm3) and low-power consumption (6W). The direct absorption measurement strategy allows absolute quantitative assessments without any calibration. Polynomial and least-squares fit algorithms are employed to remove the baseline of the spectral scan and retrieve CH4 concentrations, respectively. An Allan-Werle deviation analysis shows that the measurement precision can reach 1.4 ppb for a 60 s averaging time. Continuous measurements lasting seven days were performed to demonstrate the stability and robustness of the reported methane sensor.

  7. The actual goals of geoethics

    NASA Astrophysics Data System (ADS)

    Nemec, Vaclav

    2014-05-01

    The most actual goals of geoethics have been formulated as results of the International Conference on Geoethics (October 2013) held at the geoethics birth-place Pribram (Czech Republic): In the sphere of education and public enlightenment an appropriate needed minimum know how of Earth sciences should be intensively promoted together with cultivating ethical way of thinking and acting for the sustainable well-being of the society. The actual activities of the Intergovernmental Panel of Climate Changes are not sustainable with the existing knowledge of the Earth sciences (as presented in the results of the 33rd and 34th International Geological Congresses). This knowledge should be incorporated into any further work of the IPCC. In the sphere of legislation in a large international co-operation following steps are needed: - to re-formulate the term of a "false alarm" and its legal consequences, - to demand very consequently the needed evaluation of existing risks, - to solve problems of rights of individuals and minorities in cases of the optimum use of mineral resources and of the optimum protection of the local population against emergency dangers and disasters; common good (well-being) must be considered as the priority when solving ethical dilemmas. The precaution principle should be applied in any decision making process. Earth scientists presenting their expert opinions are not exempted from civil, administrative or even criminal liabilities. Details must be established by national law and jurisprudence. The well known case of the L'Aquila earthquake (2009) should serve as a serious warning because of the proven misuse of geoethics for protecting top Italian seismologists responsible and sentenced for their inadequate superficial behaviour causing lot of human victims. Another recent scandal with the Himalayan fossil fraud will be also documented. A support is needed for any effort to analyze and to disclose the problems of the deformation of the contemporary

  8. A short fuse after alcohol: implicit power associations predict aggressiveness after alcohol consumption in young heavy drinkers with limited executive control.

    PubMed

    Wiers, Reinout W; Beckers, Leen; Houben, Katrijn; Hofmann, Wilhelm

    2009-09-01

    This study tested a hypothesis derived from recent dual-process models, which conceptualize behavior as the interplay of associative and Executive Control (EC) processes. This general logic was applied here to the phenomenon of aggressiveness after drinking alcohol. Specifically, we predicted that automatic associations between alcohol and power would predict aggressiveness after drinking in men with relatively weak EC. Participants were 57 heavy drinking male students, who completed two versions of the Implicit Association Test (IAT), one assessing alcohol-power associations (hypothesized critical associations) and one alcohol-arousal associations (control-test), a classical Stroop test (measure of EC) and a number of alcohol-related questionnaires, including four questions on aggressiveness after drinking (dependent variable). As predicted, automatic alcohol-power associations significantly predicted self-reported aggressiveness after drinking in low but not in high EC individuals. As expected, this interaction was specific for alcohol-power associations since it was not found with regard to alcohol-arousal associations. We argue that this finding, together with a recent related findings, indicates that specific instances of "impulsivity" can be conceptualized as the joint outcome of two processes: a general weak EC and an associative process that predicts the impulsive behavior under study when not inhibited by EC processes.

  9. Accumulation of heavy metals and human health risk assessment via the consumption of freshwater fish Mastacembelus armatus inhabiting, thermal power plant effluent loaded canal.

    PubMed

    Javed, Mehjbeen; Usmani, Nazura

    2016-01-01

    Bioaccumulation of six heavy metals (Mn, Fe, Co, Ni, Cu, Zn) in the muscle of highly consumed fish species (Mastacembelus armatus) were measured using atomic absorption spectrometer. Fe (213.29 mg/kg dry weight) concentration was the most, followed by Zn (186.19 mg/kg dry weight), Ni (58.98 mg/kg dry weight), Cu (41.36 mg/kg dry weight), Co (9.06 mg/kg dry weight) and Mn (9.03 mg/kg dry weight). Estimated daily intake of heavy metals was calculated by mean fish consumption rate 19.5 × 10(-3) kg/day, on the basis of a calculation of the amount of fish consumed by adult individuals (male and female). The studied fish species pose non carcinogenic risk for Co and Ni [target hazard quotient (THQ) > 1] only. Hazard index (HI) was high. Carcinogenic risk (TR) posed by this fish for male and female was 3.43 × 10(-3) and 3.91 × 10(-3), respectively for Ni (the carcinogenic potency slope factor was available for Ni only). The study is an alert indicating that inhabitants who consume these fishes (particularly females) were at risk of Co and Ni toxicity. In India recommended guidelines have yet not been established for these heavy metals, which is essential for setting of toxicological standards.

  10. Firewood consumption in a Nepali village

    SciTech Connect

    Fox, J.

    1984-05-01

    People's dependence on firewood as a primary source of energy is causing serious deforestation problems in many developing countries. Reliable information on firewood consumption rates is needed to develop afforestation plans and to control deforestation. This study compares three methods used to determine firewood consumption in a Nepali village. Cultural and environmental factors that affect firewood consumption in the village are also examined. The weight survey proved to be the most accurate method used. The less precise daily recall and annual recall surveys overestimated actual firewood consumption by factors of 1.76 and 1.95, respectively. Overestimates are attributed to both physical and social factors. In view of the good agreement between daily and annual recall surveys, and the much greater ease of conducting the latter, annual recall surveys are recommended as the most practical method of monitoring firewood consumption rates. Validating the survey with occasional weighted measurements is suggested as a means of improving accuracy.

  11. Ferric-reducing ability power of selected plant polyphenols and their metabolites: implications for clinical studies on the antioxidant effects of fruits and vegetable consumption.

    PubMed

    deGraft-Johnson, Jeffrey; Kolodziejczyk, Krzysztof; Krol, Maciej; Nowak, Piotr; Krol, Boguslaw; Nowak, Dariusz

    2007-05-01

    Undeniably, low sensitivities in the ferric-reducing ability power (FRAP) is evident in the detection of the augmentation of plasma antioxidant activity, relative to the rise in circulating polyphenols after ingestion of fruits and vegetables. We investigated in vitro the FRAP of 17 plant polyphenols and their metabolites at submicromolar concentrations commensurate in human plasma. We then explored the in vitro effects of polyphenols and purified apple quercetin glycosides on plasma FRAP. We found that apple quercetin glycosides along with various polyphenols observed this distinct power at submicromolar concentrations. The presence of a catechol structure in the compound molecule was positively associated with FRAP (r = 0.60, P < 0.05). An aliphatic substitute at a catechol ring and a double bond in an aliphatic substitute conjugated with an aromatic ring of catechol contributed to 37% of the variance in the FRAP of compounds with catechol in the backbone structure (n = 11). Plasma supplementation with 0.2 microM mixtures of seven of the most active compounds (catechin, 3,4-dihydroxycinnamic acid, 3,4-dihydroxyhydrocinnamic acid, 3,4-dihydroxyphenylacetic acid, ferulic acid, gallic acid and quercetin) initiated a placid rise in FRAP (23.3 +/- 1.2 versus 28.1 +/- 1.3 nmol of Fe(3+), P < 0.05). Apple quercetin glycosides at 0.5 microM did not elevate plasma FRAP. Plasma alone had 30 times higher power than quercetin glycosides at 0.5 microM. Abounding of FRAP exhibited in human plasma as compared to polyphenols at submicromolar concentrations, may offer elucidation to previous incongruities implicated in insignificant rises of plasma FRAP several days after ingestion of fruits or vegetables. This suggests that intake of food products and/or supplements rich in polyphenols containing a catechol ring with an aliphatic substitute augments the plasma FRAP in human beings.

  12. US energy consumption and supply

    NASA Astrophysics Data System (ADS)

    Vanatta, C. M.

    1981-01-01

    Energy consumption and cost in 1978 and 1979 are discussed with emphasis on the effect of imported oil on the economy of the United States. Some of the international aspects of energy supply are described, and actions to meet the probability of a cutoff of oil imports from the Persian Gulf area are suggested. Short and long range strategies for ensuring energy self sufficiency are discussed. A rationale for major, long range dependence on fission and fusion power is given, and the possible advantages of a nearly all electric energy system are mentioned. Projection of energy consumption and supply to the year 2020 based upon economic and demographic models is discussed.

  13. Digital Photography as a Tool to Measure School Cafeteria Consumption

    ERIC Educational Resources Information Center

    Swanson, Mark

    2008-01-01

    Background: Assessing actual consumption of school cafeteria meals presents challenges, given recall problems of children, the cost of direct observation, and the time constraints in the school cafeteria setting. This study assesses the use of digital photography as a technique to measure what elementary-aged students select and actually consume…

  14. 63. VIEW OF AUTOTRANSFERS. THE ACTUAL AUTOTRANSFERS ARE ENCLOSED IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    63. VIEW OF AUTOTRANSFERS. THE ACTUAL AUTOTRANSFERS ARE ENCLOSED IN THE OIL FILLED CYLINDERS ON THE RIGHT OF THE PHOTOGRAPH. THESE ELECTRICAL DEVICES BOOSTED THE GENERATOR OUTPUT OF 11,000 VOLTS TO 22,000 VOLTS PRIOR TO TRANSMISSION OUT TO THE MAIN FEEDER LINES. A SPARE INNER UNIT IS CONTAINED IN THE METAL BOX AT THE LEFT OF THE PHOTOGRAPH. - New York, New Haven & Hartford Railroad, Cos Cob Power Plant, Sound Shore Drive, Greenwich, Fairfield County, CT

  15. State energy data report 1996: Consumption estimates

    SciTech Connect

    1999-02-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.

  16. Simulated thermal energy demand and actual energy consumption in refurbished and non-refurbished buildings

    NASA Astrophysics Data System (ADS)

    Ilie, C. A.; Visa, I.; Duta, A.

    2016-08-01

    The EU legal frame imposes the Nearly Zero Energy Buildings (nZEB) status to any new public building starting with January 1st, 2019 and for any other new building starting with 2021. Basically, nZEB represents a Low Energy Building (LEB) that covers more than half of the energy demand by using renewable energy systems installed on or close to it. Thus, two steps have to be followed in developing nZEB: (1) reaching the LEB status through state- of-the art architectural and construction solutions (for the new buildings) or through refurbishing for the already existent buildings, followed by (2) implementing renewables; in Romania, over 65% of the energy demand in a building is directly linked to heating, domestic hot water (DHW), and - in certain areas - for cooling. Thus, effort should be directed to reduce the thermal energy demand to be further covered by using clean and affordable systems: solar- thermal systems, heat pumps, biomass, etc. or their hybrid combinations. Obviously this demand is influenced by the onsite climatic profile and by the building performance. An almost worst case scenario is approached in the paper, considering a community implemented in a mountain area, with cold and long winters and mild summers (Odorheiul Secuiesc city, Harghita county, Romania). Three representative types of buildings are analysed: multi-family households (in blocks of flats), single-family houses and administrative buildings. For the first two types, old and refurbished buildings were comparatively discussed.

  17. Realizing actual feedback control of complex network

    NASA Astrophysics Data System (ADS)

    Tu, Chengyi; Cheng, Yuhua

    2014-06-01

    In this paper, we present the concept of feedbackability and how to identify the Minimum Feedbackability Set of an arbitrary complex directed network. Furthermore, we design an estimator and a feedback controller accessing one MFS to realize actual feedback control, i.e. control the system to our desired state according to the estimated system internal state from the output of estimator. Last but not least, we perform numerical simulations of a small linear time-invariant dynamics network and a real simple food network to verify the theoretical results. The framework presented here could make an arbitrary complex directed network realize actual feedback control and deepen our understanding of complex systems.

  18. State energy data report 1994: Consumption estimates

    SciTech Connect

    1996-10-01

    This document provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), operated by EIA. SEDS provides State energy consumption estimates to members of Congress, Federal and State agencies, and the general public, and provides the historical series needed for EIA`s energy models. Division is made for each energy type and end use sector. Nuclear electric power is included.

  19. Children's Rights and Self-Actualization Theory.

    ERIC Educational Resources Information Center

    Farmer, Rod

    1982-01-01

    Educators need to seriously reflect upon the concept of children's rights. Though the idea of children's rights has been debated numerous times, the idea remains vague and shapeless; however, Maslow's theory of self-actualization can provide the children's rights idea with a needed theoretical framework. (Author)

  20. Group Counseling for Self-Actualization.

    ERIC Educational Resources Information Center

    Streich, William H.; Keeler, Douglas J.

    Self-concept, creativity, growth orientation, an integrated value system, and receptiveness to new experiences are considered to be crucial variables to the self-actualization process. A regular, year-long group counseling program was conducted with 85 randomly selected gifted secondary students in the Farmington, Connecticut Public Schools. A…

  1. Culture Studies and Self-Actualization Theory.

    ERIC Educational Resources Information Center

    Farmer, Rod

    1983-01-01

    True citizenship education is impossible unless students develop the habit of intelligently evaluating cultures. Abraham Maslow's theory of self-actualization, a theory of innate human needs and of human motivation, is a nonethnocentric tool which can be used by teachers and students to help them understand other cultures. (SR)

  2. Humanistic Education and Self-Actualization Theory.

    ERIC Educational Resources Information Center

    Farmer, Rod

    1984-01-01

    Stresses the need for theoretical justification for the development of humanistic education programs in today's schools. Explores Abraham Maslow's hierarchy of needs and theory of self-actualization. Argues that Maslow's theory may be the best available for educators concerned with educating the whole child. (JHZ)

  3. Developing Human Resources through Actualizing Human Potential

    ERIC Educational Resources Information Center

    Clarken, Rodney H.

    2012-01-01

    The key to human resource development is in actualizing individual and collective thinking, feeling and choosing potentials related to our minds, hearts and wills respectively. These capacities and faculties must be balanced and regulated according to the standards of truth, love and justice for individual, community and institutional development,…

  4. 50 CFR 253.16 - Actual cost.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Actual cost. 253.16 Section 253.16 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE AID TO FISHERIES FISHERIES ASSISTANCE PROGRAMS Fisheries Finance Program §...

  5. Whiteheadian Actual Entitities and String Theory

    NASA Astrophysics Data System (ADS)

    Bracken, Joseph A.

    2012-06-01

    In the philosophy of Alfred North Whitehead, the ultimate units of reality are actual entities, momentary self-constituting subjects of experience which are too small to be sensibly perceived. Their combination into "societies" with a "common element of form" produces the organisms and inanimate things of ordinary sense experience. According to the proponents of string theory, tiny vibrating strings are the ultimate constituents of physical reality which in harmonious combination yield perceptible entities at the macroscopic level of physical reality. Given that the number of Whiteheadian actual entities and of individual strings within string theory are beyond reckoning at any given moment, could they be two ways to describe the same non-verifiable foundational reality? For example, if one could establish that the "superject" or objective pattern of self- constitution of an actual entity vibrates at a specific frequency, its affinity with the individual strings of string theory would be striking. Likewise, if one were to claim that the size and complexity of Whiteheadian 'societies" require different space-time parameters for the dynamic interrelationship of constituent actual entities, would that at least partially account for the assumption of 10 or even 26 instead of just 3 dimensions within string theory? The overall conclusion of this article is that, if a suitably revised understanding of Whiteheadian metaphysics were seen as compatible with the philosophical implications of string theory, their combination into a single world view would strengthen the plausibility of both schemes taken separately. Key words: actual entities, subject/superjects, vibrating strings, structured fields of activity, multi-dimensional physical reality.

  6. Tidal power in Argentina

    SciTech Connect

    Aisiks, E.G.

    1993-03-01

    This presentation describes the tidal power potential of Argentina and the current status of its utilization. The topics of the presentation include tidal power potential, electric production of the region and the Argentine share of production and consumption, conventional hydroelectric potential, economic feasibility of tidal power production, and the general design and feasibility of a tidal power plant planned for the San Jose Gulf.

  7. The Actual Apollo 13 Prime Crew

    NASA Technical Reports Server (NTRS)

    1970-01-01

    The actual Apollo 13 lunar landing mission prime crew from left to right are: Commander, James A. Lovell Jr., Command Module pilot, John L. Swigert Jr.and Lunar Module pilot, Fred W. Haise Jr. The original Command Module pilot for this mission was Thomas 'Ken' Mattingly Jr. but due to exposure to German measles he was replaced by his backup, Command Module pilot, John L. 'Jack' Swigert Jr.

  8. Predicting Ship Fuel Consumption: Update.

    DTIC Science & Technology

    1996-07-01

    ship propulsion fuel consumption as a function of ship speed for U.S. Navy combatant and auxiliary ships. Prediction is based on fitting an analytic function to published ship class speed-fuel use data using nonlinear regression. The form of the analytic function fitted is motivated by the literature on ship powering and resistance. The report discusses data sources and data issues, and the impact of ship propulsion plant configuration on fuel use. The regression coefficients of the exponential function fitted, tabular numerical comparison of

  9. Brand switching or reduced consumption? A study of how cigarette taxes affect tobacco consumption.

    PubMed

    Chen, Chiang-Ming; Chang, Kuo-Liang; Lin, Lin; Lee, Jwo-Leun

    2014-12-01

    We examined the influence of cigarette taxes on tobacco consumption, with an emphasis on smokers' choice between reducing cigarette consumption and switching brands. We constructed three scenario-based models to study the following two subjects: (1) the relationship between deciding whether to reduce one's cigarette consumption and to practice brand switching (simultaneous or sequential); (2) the key determinants that affect smokers' decisions in terms of their consumption and brand switching when facing higher taxes. We applied data collected from a survey in Taiwan, and the results indicated that both independent and two-stage decision-making models generated very similar conclusions. We also found that gender difference contributed to reduce cigarette consumption. In addition, this study indicated that high-income smokers were less likely to switch brands, whereas well-educated smokers were more likely to switch brands. Most importantly, we questioned the effectiveness of cigarette tax policy, as our results suggested that higher price did not necessarily reduce consumption. Indeed, data indicated that <24 % of smokers actually reduced their cigarette consumption after the tax on cigarettes increased.

  10. Overview of Alcohol Consumption

    MedlinePlus

    ... Work Our Funding Our Staff Jobs & Training Our Location Contact Us You are here Home » Alcohol & Your Health » Overview of Alcohol Consumption In this Section Alcohol Facts & Statistics What Is A Standard Drink? Drinking Levels Defined Overview of Alcohol Consumption ...

  11. Automated Power-Distribution System

    NASA Technical Reports Server (NTRS)

    Ashworth, Barry; Riedesel, Joel; Myers, Chris; Miller, William; Jones, Ellen F.; Freeman, Kenneth; Walsh, Richard; Walls, Bryan K.; Weeks, David J.; Bechtel, Robert T.

    1992-01-01

    Autonomous power-distribution system includes power-control equipment and automation equipment. System automatically schedules connection of power to loads and reconfigures itself when it detects fault. Potential terrestrial applications include optimization of consumption of power in homes, power supplies for autonomous land vehicles and vessels, and power supplies for automated industrial processes.

  12. Tackling the Knowledge: Action Gap in Sustainable Consumption--Insights from a Participatory School Programme

    ERIC Educational Resources Information Center

    Barth, Matthias; Fischer, Daniel; Michelsen, Gerd; Nemnich, Claudia; Rode, Horst

    2012-01-01

    In the international policy discourse on sustainable consumption and production, education is acknowledged to be a powerful tool in changing unsustainable patterns of consumption. Current educational policies and programmes have responded to the consumption challenge mainly by including and addressing consumption issues in formal tuition in…

  13. Bat consumption in Thailand

    PubMed Central

    Suwannarong, Kanokwan; Schuler, Sidney

    2016-01-01

    Background Human consumption of bats poses an increasing public health threat globally. Communities in which bat guano is mined from caves have extensive exposure to bat excreta, often harvest bats for consumption, and are at risk for bat-borne diseases. Methods This rapid ethnographic study was conducted in four provinces of Thailand (Ratchaburi, Sakaeo, Nakorn Sawan, and Phitsanulok), where bat guano was mined and sold during the period April–August 2014. The aim of this study was to understand behaviors and risk perceptions associated with bat conservation, exposure to bats and their excreta, and bat consumption. Sixty-seven respondents playing various roles in bat guano mining, packaging, sale, and use as fertilizer participated in the study. Data were collected through interviews and/or focus group discussions. Results In spite of a bat conservation program dating back to the 1980s, the benefits of conserving bats and the risks associated with bat consumption were not clear and infrequently articulated by study respondents. Discussion Since bat consumption continues, albeit covertly, the risk of bat-borne diseases remains high. There is an opportunity to reduce the risk of bat-borne diseases in guano-mining communities by strengthening bat conservation efforts and raising awareness of the health risks of bat consumption. Further research is suggested to test behavior change strategies for reducing bat consumption. PMID:26806167

  14. Explosive Percolation Transition is Actually Continuous

    NASA Astrophysics Data System (ADS)

    da Costa, R. A.; Dorogovtsev, S. N.; Goltsev, A. V.; Mendes, J. F. F.

    2010-12-01

    Recently a discontinuous percolation transition was reported in a new “explosive percolation” problem for irreversible systems [D. Achlioptas, R. M. D’Souza, and J. Spencer, Science 323, 1453 (2009)SCIEAS0036-807510.1126/science.1167782] in striking contrast to ordinary percolation. We consider a representative model which shows that the explosive percolation transition is actually a continuous, second order phase transition though with a uniquely small critical exponent of the percolation cluster size. We describe the unusual scaling properties of this transition and find its critical exponents and dimensions.

  15. Neoadjuvant Treatment in Rectal Cancer: Actual Status

    PubMed Central

    Garajová, Ingrid; Di Girolamo, Stefania; de Rosa, Francesco; Corbelli, Jody; Agostini, Valentina; Biasco, Guido; Brandi, Giovanni

    2011-01-01

    Neoadjuvant (preoperative) concomitant chemoradiotherapy (CRT) has become a standard treatment of locally advanced rectal adenocarcinomas. The clinical stages II (cT3-4, N0, M0) and III (cT1-4, N+, M0) according to International Union Against Cancer (IUCC) are concerned. It can reduce tumor volume and subsequently lead to an increase in complete resections (R0 resections), shows less toxicity, and improves local control rate. The aim of this review is to summarize actual approaches, main problems, and discrepancies in the treatment of locally advanced rectal adenocarcinomas. PMID:22295206

  16. Air resistance measurements on actual airplane parts

    NASA Technical Reports Server (NTRS)

    Weiselsberger, C

    1923-01-01

    For the calculation of the parasite resistance of an airplane, a knowledge of the resistance of the individual structural and accessory parts is necessary. The most reliable basis for this is given by tests with actual airplane parts at airspeeds which occur in practice. The data given here relate to the landing gear of a Siemanms-Schuckert DI airplane; the landing gear of a 'Luftfahrzeug-Gesellschaft' airplane (type Roland Dlla); landing gear of a 'Flugzeugbau Friedrichshafen' G airplane; a machine gun, and the exhaust manifold of a 269 HP engine.

  17. Energy-consumption modelling

    SciTech Connect

    Reiter, E.R.

    1980-01-01

    A highly sophisticated and accurate approach is described to compute on an hourly or daily basis the energy consumption for space heating by individual buildings, urban sectors, and whole cities. The need for models and specifically weather-sensitive models, composite models, and space-heating models are discussed. Development of the Colorado State University Model, based on heat-transfer equations and on a heuristic, adaptive, self-organizing computation learning approach, is described. Results of modeling energy consumption by the city of Minneapolis and Cheyenne are given. Some data on energy consumption in individual buildings are included.

  18. Power levels in office equipment: Measurements of new monitors and personal computers

    SciTech Connect

    Roberson, Judy A.; Brown, Richard E.; Nordman, Bruce; Webber, Carrie A.; Homan, Gregory H.; Mahajan, Akshay; McWhinney, Marla; Koomey, Jonathan G.

    2002-05-14

    Electronic office equipment has proliferated rapidly over the last twenty years and is projected to continue growing in the future. Efforts to reduce the growth in office equipment energy use have focused on power management to reduce power consumption of electronic devices when not being used for their primary purpose. The EPA ENERGY STAR[registered trademark] program has been instrumental in gaining widespread support for power management in office equipment, and accurate information about the energy used by office equipment in all power levels is important to improving program design and evaluation. This paper presents the results of a field study conducted during 2001 to measure the power levels of new monitors and personal computers. We measured off, on, and low-power levels in about 60 units manufactured since July 2000. The paper summarizes power data collected, explores differences within the sample (e.g., between CRT and LCD monitors), and discusses some issues that arise in m etering office equipment. We also present conclusions to help improve the success of future power management programs.Our findings include a trend among monitor manufacturers to provide a single very low low-power level, and the need to standardize methods for measuring monitor on power, to more accurately estimate the annual energy consumption of office equipment, as well as actual and potential energy savings from power management.

  19. Rituals enhance consumption.

    PubMed

    Vohs, Kathleen D; Wang, Yajin; Gino, Francesca; Norton, Michael I

    2013-09-01

    Four experiments tested the novel hypothesis that ritualistic behavior potentiates and enhances ensuing consumption--an effect found for chocolates, lemonade, and even carrots. Experiment 1 showed that participants who engaged in ritualized behavior, compared with those who did not, evaluated chocolate as more flavorful, valuable, and deserving of behavioral savoring. Experiment 2 demonstrated that random gestures do not boost consumption as much as ritualistic gestures do. It further showed that a delay between a ritual and the opportunity to consume heightens enjoyment, which attests to the idea that ritual behavior stimulates goal-directed action (to consume). Experiment 3 found that performing a ritual oneself enhances consumption more than watching someone else perform the same ritual, suggesting that personal involvement is crucial for the benefits of rituals to emerge. Finally, Experiment 4 provided direct evidence of the underlying process: Rituals enhance the enjoyment of consumption because of the greater involvement in the experience that they prompt.

  20. Human Biomass Consumption

    NASA Video Gallery

    Humans are using an increasing amount of Earth’s annual production of plants. Research shows that, from 1995 to 2005, consumption rose from 20 to 25 percent of the planet's annual production. Wha...

  1. Discrepancy between actual and ideal body images; Impact on eating and exercise behaviors.

    PubMed

    Anton, S D; Perri, M G; Riley, J R

    2000-12-01

    This study examined how discrepancies between actual and ideal body images are related to eating and exercise patterns. A total of 115 college-age women completed the Body Discrepancy Scale (BDS, a measure of the discrepancy between one's "actual" vs. "ideal" weight and size), a leisure-time physical activity survey, and questionnaires assessing the intake of fat and fiber (i.e., fruits and vegetables), as well as measures of maladaptive eating attitudes and behaviors. Partial correlations (controlling for Body Mass Index, BMI) showed that scores on the BDS were significantly (P's<.05) associated with low levels of physical activity (r=-.28), with low levels of fruit and vegetable consumption (r=-.19), and with high levels of body image dissatisfaction (r=.32) and binge eating (r=.32). Collectively, these findings suggest that discrepancies between actual and ideal body images are associated with maladaptive eating and exercise patterns.

  2. Wing kinematics in a hovering dronefly minimize power expenditure.

    PubMed

    Wu, J H; Sun, M

    2014-10-15

    When an insect hovers or performs constant-speed flight, its wings flap at certain amplitude, frequency, angle of attack, etc., and the flight is balanced (vertical force equals to the weight, and horizontal force and pitch moment are zero). It is possible that when some other sets of values of wing kinematical parameters are used, the force and moment balance conditions can still be satisfied. Does the wing kinematics used by a constant-speed flying insect minimize the power expenditure? In this study, whether the wing kinematics used by a freely hovering dronefly minimizes its energy expenditure was investigated. First, the power consumption using the set of values of wing kinematical parameters that was actually employed by the insect was computed. Then, the kinematical parameters were changed while keeping the equilibrium flight conditions satisfied, and the power consumption was recalculated. It was found that wing kinematical parameters used by the freely hovering dronefly are very close to that minimize its energy consumption, and they can ensure the margin of controllability from hovering to maneuvers. That is, slight change of wing kinematical parameters did not cause significant change of the specific power (maintained a relatively small value).

  3. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  4. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 10 2012-01-01 2012-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  5. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  6. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  7. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  8. The actual status of Astronomy in Moldova

    NASA Astrophysics Data System (ADS)

    Gaina, A.

    The astronomical research in the Republic of Moldova after Nicolae Donitch (Donici)(1874-1956(?)) were renewed in 1957, when a satellites observations station was open in Chisinau. Fotometric observations and rotations of first Soviet artificial satellites were investigated under a program SPIN put in action by the Academy of Sciences of former Socialist Countries. The works were conducted by Assoc. prof. Dr. V. Grigorevskij, which conducted also research in variable stars. Later, at the beginning of 60-th, an astronomical Observatory at the Chisinau State University named after Lenin (actually: the State University of Moldova), placed in Lozovo-Ciuciuleni villages was open, which were coordinated by Odessa State University (Prof. V.P. Tsesevich) and the Astrosovet of the USSR. Two main groups worked in this area: first conducted by V. Grigorevskij (till 1971) and second conducted by L.I. Shakun (till 1988), both graduated from Odessa State University. Besides this research areas another astronomical observations were made: Comets observations, astroclimate and atmospheric optics in collaboration with the Institute of the Atmospheric optics of the Siberian branch of the USSR (V. Chernobai, I. Nacu, C. Usov and A.F. Poiata). Comets observations were also made since 1988 by D. I. Gorodetskij which came to Chisinau from Alma-Ata and collaborated with Ukrainean astronomers conducted by K.I. Churyumov. Another part of space research was made at the State University of Tiraspol since the beggining of 70-th by a group of teaching staff of the Tiraspol State Pedagogical University: M.D. Polanuer, V.S. Sholokhov. No a collaboration between Moldovan astronomers and Transdniestrian ones actually exist due to War in Transdniestria in 1992. An important area of research concerned the Radiophysics of the Ionosphere, which was conducted in Beltsy at the Beltsy State Pedagogical Institute by a group of teaching staff of the University since the beginning of 70-th: N. D. Filip, E

  9. Photovoltaic performance models: an evaluation with actual field data

    NASA Astrophysics Data System (ADS)

    TamizhMani, Govindasamy; Ishioye, John-Paul; Voropayev, Arseniy; Kang, Yi

    2008-08-01

    Prediction of energy production is crucial to the design and installation of the building integrated photovoltaic systems. This prediction should be attainable based on the commonly available parameters such as system size, orientation and tilt angle. Several commercially available as well as free downloadable software tools exist to predict energy production. Six software models have been evaluated in this study and they are: PV Watts, PVsyst, MAUI, Clean Power Estimator, Solar Advisor Model (SAM) and RETScreen. This evaluation has been done by comparing the monthly, seasonaly and annually predicted data with the actual, field data obtained over a year period on a large number of residential PV systems ranging between 2 and 3 kWdc. All the systems are located in Arizona, within the Phoenix metropolitan area which lies at latitude 33° North, and longitude 112 West, and are all connected to the electrical grid.

  10. An Operating Method Using Prediction of Photovoltaic Power for a Photovoltaic-Diesel Hybrid Power Generation System

    NASA Astrophysics Data System (ADS)

    Yamamoto, Shigehiro; Sumi, Kazuyoshi; Nishikawa, Eiichi; Hashimoto, Takeshi

    This paper describes a novel operating method using prediction of photovoltaic (PV) power for a photovoltaic-diesel hybrid power generation system. The system is composed of a PV array, a storage battery, a bi-directional inverter and a diesel engine generator (DG). The proposed method enables the system to save fuel consumption by using PV energy effectively, reducing charge and discharge energy of the storage battery, and avoiding low-load operation of the DG. The PV power is simply predicted from a theoretical equation of solar radiation and the observed PV energy for a constant time before the prediction. The amount of fuel consumption of the proposed method is compared with that of other methods by a simulation based on measurement data of the PV power at an actual PV generation system for one year. The simulation results indicate that the amount of fuel consumption of the proposed method is smaller than that of any other methods, and is close to that of the ideal operation of the DG.

  11. The Spatial and Temporal Consumptive Water Use Impacts of Rapid Shale Gas Development and Use in Texas

    NASA Astrophysics Data System (ADS)

    Pacsi, A. P.; Allen, D.

    2013-12-01

    Over the past several years, the development of shale gas resources has proceeded rapidly in many areas of the United States, and this shale gas development requires the use of millions of gallons of water, per well, for hydraulic fracturing. Recent life cycle assessments of natural gas from shale formations have calculated the potential for water use reduction when water use is integrated along the entire natural gas supply chain, if the shale gas is used in natural-gas power plants to displace coal-fired electricity generation. Actual grid operation, however, is more complicated and would require both that sufficient unused natural gas generation capacity exists for the displacement of coal-fired power generation and that the natural gas price is low enough that the switching is financially feasible. In addition, water savings, which would occur mainly from a reduction in the cooling water demand at coal-fired power plants, may occur in different regions and at different times than water used in natural gas production. Thus, consumptive water impacts may be spatial and temporally disparate, which is not a consideration in current life-cycle literature. The development of shale gas resources in Texas in August 2008 through December 2009 was chosen as a case study for characterizing this phenomenon since Texas accounted for two-thirds of the shale gas produced in the United States during this period and since the price of natural gas for electricity generation dropped significantly over the episode. Changes to the Texas self-contained electric grid (ERCOT) for a scenario with actual natural gas production and prices was estimated using a constrained grid model, rather than assuming that natural gas generation would displace coal-fired power plant usage. The actual development scenario was compared to an alternative development scenario in which natural gas prices remained elevated throughout the episode. Upstream changes in water consumption from lignite (coal

  12. Content Consumption and Hierarchical Structures of Web-Supported Courses

    ERIC Educational Resources Information Center

    Hershkovitz, Arnon; Hardof-Jaffe, Sharon; Nachmias, Rafi

    2014-01-01

    This study presents an empirical investigation of the relationship between the hierarchical structure of content delivered to students within a Learning Management System (LMS) and its actual consumption. To this end, campus-wide data relating to 1,203 courses were collected from the LMS' servers and were subsequently analyzed using data mining…

  13. Validation of the FLAGSOL parabolic trough solar power plant performance model

    SciTech Connect

    Price, H.W.; Svoboda, P.; Kearney, D.

    1994-10-01

    This paper describes the results of a validation of the FLAGSOL parabolic trough solar power plant performance model. The validation was accomplished by simulating an operating solar electric generating system (SEGS) parabolic trough solar thermal power plant and comparing the model output results with actual plant operating data. This comparison includes instantaneous, daily, and annual total solar thermal electric output, gross solar electric generation, and solar mode parasitic electric consumption. The results indicate that the FLAGSOL model adequately predicts the gross solar electric output of an operating plant, both on a daily and an annual basis.

  14. Investigating the discrepancy between the predicted and actual energy performance of buildings

    NASA Astrophysics Data System (ADS)

    Demanuele, Christine

    The threat of climate change has increased the demand for energy efficiency in buildings, with various stakeholders requesting more accurate predictions of energy consumption, and energy consultants coming under increased pressure to guarantee the energy performance of buildings. This study aims to investigate the factors causing the discrepancy which currently exists between the predicted and actual energy performance of buildings, which will lead to a deeper understanding of this discrepancy and, ultimately, more accurate energy predictions. As part of this study, a non-domestic building in London was modelled and monitored, so as to identify the main contributors to the discrepancy between the predicted and actual energy consumption. In addition, sensitivity analysis was carried out on a number of input variables to establish the set of influential parameters, and to determine whether using such techniques would successfully predict the range in which building energy consumption is likely to fall. The results show that the uncertainty calculated from differential sensitivity analysis encompasses the actual energy performance of the building. The most variable and influential parameters are those which are controlled by occupants, therefore it is paramount that management and occupants are well-informed about the building operation for energy targets to be achieved. Although the sensitivity analysis methods employed are impractical for commercial use, it is possible to develop simpler methods, encompassing all stages of building design and operation, which would decrease the discrepancy between the actual and predicted energy performance of buildings. Such techniques would be invaluable to energy consultants, for whom the cost resting on uncertainties in predictions is substantial due to more demanding clients and fines liable to be paid if energy predictions go wrong. A better understanding of the discrepancy, together with more accurate predictions, would

  15. Caustic-Side Solvent Extraction: Prediction of Cesium Extraction for Actual Wastes and Actual Waste Simulants

    SciTech Connect

    Delmau, L.H.; Haverlock, T.J.; Sloop, F.V., Jr.; Moyer, B.A.

    2003-02-01

    This report presents the work that followed the CSSX model development completed in FY2002. The developed cesium and potassium extraction model was based on extraction data obtained from simple aqueous media. It was tested to ensure the validity of the prediction for the cesium extraction from actual waste. Compositions of the actual tank waste were obtained from the Savannah River Site personnel and were used to prepare defined simulants and to predict cesium distribution ratios using the model. It was therefore possible to compare the cesium distribution ratios obtained from the actual waste, the simulant, and the predicted values. It was determined that the predicted values agree with the measured values for the simulants. Predicted values also agreed, with three exceptions, with measured values for the tank wastes. Discrepancies were attributed in part to the uncertainty in the cation/anion balance in the actual waste composition, but likely more so to the uncertainty in the potassium concentration in the waste, given the demonstrated large competing effect of this metal on cesium extraction. It was demonstrated that the upper limit for the potassium concentration in the feed ought to not exceed 0.05 M in order to maintain suitable cesium distribution ratios.

  16. Estimation of food consumption

    SciTech Connect

    Callaway, J.M. Jr.

    1992-04-01

    The research reported in this document was conducted as a part of the Hanford Environmental Dose Reconstruction (HEDR) Project. The objective of the HEDR Project is to estimate the radiation doses that people could have received from operations at the Hanford Site. Information required to estimate these doses includes estimates of the amounts of potentially contaminated foods that individuals in the region consumed during the study period. In that general framework, the objective of the Food Consumption Task was to develop a capability to provide information about the parameters of the distribution(s) of daily food consumption for representative groups in the population for selected years during the study period. This report describes the methods and data used to estimate food consumption and presents the results developed for Phase I of the HEDR Project.

  17. Amtrak fuel consumption study

    SciTech Connect

    Hitz, J.

    1981-02-01

    This report documents a study of fuel consumption on National Railroad Passenger Corporation (Amtrak) trains and is part of an effort to determine effective ways of conserving fuel on the Amtrak system. The study was performed by the Transportation Systems Center (TSC). A series of 26 test runs were conducted on Amtrak trains operating between Boston, Massachusetts, and New Haven, Connecticut, to measure fuel consumption, trip time and other fuel-use-related parameters. The test data were analyzed and compared with results of the TSC Train Performance Simulator replicating the same operations.

  18. 19 CFR 19.18 - Smelting and refining; allowance for wastage; withdrawal for consumption.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... filing the withdrawals; but neither the actual ability to withdraw smelted or refined products from the...; withdrawal for consumption. 19.18 Section 19.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT... wastage; withdrawal for consumption. (a) Except where absolute deductions have been allowed in...

  19. 19 CFR 19.18 - Smelting and refining; allowance for wastage; withdrawal for consumption.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... filing the withdrawals; but neither the actual ability to withdraw smelted or refined products from the...; withdrawal for consumption. 19.18 Section 19.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT... wastage; withdrawal for consumption. (a) Except where absolute deductions have been allowed in...

  20. 19 CFR 19.18 - Smelting and refining; allowance for wastage; withdrawal for consumption.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... filing the withdrawals; but neither the actual ability to withdraw smelted or refined products from the...; withdrawal for consumption. 19.18 Section 19.18 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT... wastage; withdrawal for consumption. (a) Except where absolute deductions have been allowed in...

  1. An electricity consumption model for electric vehicular flow

    NASA Astrophysics Data System (ADS)

    Xiao, Hong; Huang, Hai-Jun; Tang, Tie-Qiao

    2016-09-01

    In this paper, we apply the relationships between the macro and micro variables of traffic flow to develop an electricity consumption model for electric vehicular flow. We use the proposed model to study the quantitative relationships between the electricity consumption/total power and speed/density under uniform flow, and the electricity consumptions during the evolution processes of shock, rarefaction wave and small perturbation. The numerical results indicate that the proposed model can perfectly describe the electricity consumption for electric vehicular flow, which shows that the proposed model is reasonable.

  2. The Survey and Analysis of Excellent Senior High School Physics Teachers' Professional Growth Actuality

    ERIC Educational Resources Information Center

    Sun, Haibin; Liu, Tingting

    2010-01-01

    Excellent senior high school physics teachers are the backbone power in the new course reform of physics in China. The excellent senior high school physics teachers' professional growth actuality in Shandong is surveyed in this article by the self-made "Questionnaire of Excellent Senior High School Physics Teachers' Professional Growth",…

  3. Trimode optimizes hybrid power plants. Final report: Phase 2

    SciTech Connect

    O`Sullivan, G.A.; O`Sullivan, J.A.

    1998-07-01

    In the Phase 2 project, Abacus Controls Inc. did research and development of hybrid systems that combine the energy sources from photovoltaics, batteries, and diesel-generators and demonstrated that they are economically feasible for small power plants in many parts of the world. The Trimode Power Processor reduces the fuel consumption of the diesel-generator to its minimum by presenting itself as the perfect electrical load to the generator. A 30-kW three-phase unit was tested at Sandia National Laboratories to prove its worthiness in actual field conditions. The use of photovoltaics at remote locations where reliability of supply requires a diesel-generator will lower costs to operate by reducing the run time of the diesel generator. The numerous benefits include longer times between maintenance for the diesel engine and better power quality from the generator. 32 figs.

  4. Consequences of Predicted or Actual Asteroid Impacts

    NASA Astrophysics Data System (ADS)

    Chapman, C. R.

    2003-12-01

    Earth impact by an asteroid could have enormous physical and environmental consequences. Impactors larger than 2 km diameter could be so destructive as to threaten civilization. Since such events greatly exceed any other natural or man-made catastrophe, much extrapolation is necessary just to understand environmental implications (e.g. sudden global cooling, tsunami magnitude, toxic effects). Responses of vital elements of the ecosystem (e.g. agriculture) and of human society to such an impact are conjectural. For instance, response to the Blackout of 2003 was restrained, but response to 9/11 terrorism was arguably exaggerated and dysfunctional; would society be fragile or robust in the face of global catastrophe? Even small impacts, or predictions of impacts (accurate or faulty), could generate disproportionate responses, especially if news media reports are hyped or inaccurate or if responsible entities (e.g. military organizations in regions of conflict) are inadequately aware of the phenomenology of small impacts. Asteroid impact is the one geophysical hazard of high potential consequence with which we, fortunately, have essentially no historical experience. It is thus important that decision makers familiarize themselves with the hazard and that society (perhaps using a formal procedure, like a National Academy of Sciences study) evaluate the priority of addressing the hazard by (a) further telescopic searches for dangerous but still-undiscovered asteroids and (b) development of mitigation strategies (including deflection of an oncoming asteroid and on- Earth civil defense). I exemplify these issues by discussing several representative cases that span the range of parameters. Many of the specific physical consequences of impact involve effects like those of other geophysical disasters (flood, fire, earthquake, etc.), but the psychological and sociological aspects of predicted and actual impacts are distinctive. Standard economic cost/benefit analyses may not

  5. Price and cigarette consumption in Europe

    PubMed Central

    Gallus, S; Schiaffino, A; Vecchia, C La; Townsend, J; Fernandez, E

    2006-01-01

    Objective To analyse the variation in demand for tobacco according to price of cigarettes across the European region. Design Cross‐sectional study. Setting All the 52 countries of the European region. Participants For each European country, data were collected on annual per adult cigarette consumption (2000), smoking prevalence (most recent), retail price of a pack of local and foreign brand cigarettes (around 2000), the gross domestic product adjusted by purchasing power parities, and the adult population (2000). Main outcome measure Price elasticity of demand for cigarettes (that is, the change in cigarette consumption according to a change in tobacco price) across all the European countries, estimated by double‐log multiple linear regression. Results Controlling for male to female prevalence ratio, price elasticities for consumption were −0.46 (95% confidence interval (CI) −0.74 to −0.17) and −0.74 (95% CI −1.13 to −0.35) for local and foreign brand, respectively. The inverse relation between cigarette price and consumption was stronger in countries not in the European Union (price elasticity for foreign brand cigarettes of −0.8) as compared to European Union countries (price elasticity of −0.4). Conclusions The result that, on average, in Europe smoking consumption decreases 5–7% for a 10% increase in the real price of cigarettes strongly supports an inverse association between price and cigarette smoking. PMID:16565459

  6. Frigate Fuel Consumption Indicator

    DTIC Science & Technology

    2010-09-20

    Report DRDC-RDDC-2014- C50 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is...estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the...number. 1 . REPORT DATE 20 SEP 2010 2. REPORT TYPE 3. DATES COVERED 00-00-2010 to 00-00-2010 4. TITLE AND SUBTITLE Frigate Fuel Consumption

  7. External Validity of Contingent Valuation: Comparing Hypothetical and Actual Payments.

    PubMed

    Ryan, Mandy; Mentzakis, Emmanouil; Jareinpituk, Suthi; Cairns, John

    2016-10-09

    Whilst contingent valuation is increasingly used in economics to value benefits, questions remain concerning its external validity that is do hypothetical responses match actual responses? We present results from the first within sample field test. Whilst Hypothetical No is always an Actual No, Hypothetical Yes exceed Actual Yes responses. A constant rate of response reversals across bids/prices could suggest theoretically consistent option value responses. Certainty calibrations (verbal and numerical response scales) minimise hypothetical-actual discrepancies offering a useful solution. Helping respondents resolve uncertainty may reduce the discrepancy between hypothetical and actual payments and thus lead to more accurate policy recommendations. Copyright © 2016 John Wiley & Sons, Ltd.

  8. Smart energy management and low-power design of sensor and actuator nodes on algorithmic level for self-powered sensorial materials and robotics

    NASA Astrophysics Data System (ADS)

    Bosse, Stefan; Behrmann, Thomas

    2011-06-01

    We propose and demonstrate a design methodology for embedded systems satisfying low power requirements suitable for self-powered sensor and actuator nodes. This design methodology focuses on 1. smart energy management at runtime and 2. application-specific System-On- Chip (SoC) design at design time, contributing to low-power systems on both algorithmic and technology level. Smart energy management is performed spatially at runtime by a behaviour-based or state-action-driven selection from a set of different (implemented) algorithms classified by their demand of computation power, and temporally by varying data processing rates. It can be shown that power/energy consumption of an application-specific SoC design depends strongly on computation complexity. Signal and control processing is modelled on abstract level using signal flow diagrams. These signal flow graphs are mapped to Petri Nets to enable direct high-level synthesis of digital SoC circuits using a multi-process architecture with the Communicating-Sequential-Process model on execution level. Power analysis using simulation techniques on gatelevel provides input for the algorithmic selection during runtime of the system, leading to a closed-loop design flow. Additionally, the signal-flow approach enables power management by varying the signal flow and data processing rates depending on actual energy consumption, estimated energy deposit, and required Quality-of-Service.

  9. From deep sequencing to actual clones.

    PubMed

    D'Angelo, Sara; Kumar, Sandeep; Naranjo, Leslie; Ferrara, Fortunato; Kiss, Csaba; Bradbury, Andrew R M

    2014-10-01

    The application of deep sequencing to in vitro display technologies has been invaluable for the straightforward analysis of enriched clones. After sequencing in vitro selected populations, clones are binned into identical or similar groups and ordered by abundance, allowing identification of those that are most enriched. However, the greatest strength of deep sequencing is also its greatest weakness: clones are easily identified by their DNA sequences, but are not physically available for testing without a laborious multistep process involving several rounds of polymerization chain reaction (PCR), assembly and cloning. Here, using the isolation of antibody genes from a phage and yeast display selection as an example, we show the power of a rapid and simple inverse PCR-based method to easily isolate clones identified by deep sequencing. Once primers have been received, clone isolation can be carried out in a single day, rather than two days. Furthermore the reduced number of PCRs required will reduce PCR mutations correspondingly. We have observed a 100% success rate in amplifying clones with an abundance as low as 0.5% in a polyclonal population. This approach allows us to obtain full-length clones even when an incomplete sequence is available, and greatly simplifies the subcloning process. Moreover, rarer, but functional clones missed by traditional screening can be easily isolated using this method, and the approach can be extended to any selected library (scFv, cDNA, libraries based on scaffold proteins) where a unique sequence signature for the desired clones of interest is available.

  10. [Some problems in measuring the frequency-resolving power of hearing].

    PubMed

    Supin, A Ia

    2004-08-01

    In spite of detailed elaboration of masking methods of measuring the frequency selectivity of hearing, such measurements actually are not in use for diagnostics purpose because of their time-consumption and ambiguity of extrapolation of the results to perception of complex sound spectrum patterns. A method of direct measuring of spectrum resolving power using rippled-noise test, is suggested. Results of measurements have shown that the actual ability of hearing to discriminate complex sound spectra is higher than that predicted by acuteness of auditory frequency filters: dependence of acuteness of auditory frequency filters on sound level does not influence the ability to discriminate complex spectra; and the influence on interfering noise on the frequency resolving power can not be explained by a decrease of the spectral contrast by the spread of excitation.

  11. Machining strategies exploring reduction in energy consumption

    NASA Astrophysics Data System (ADS)

    Mamun, Abdullah Al

    The main aim of this thesis is to explore machining strategies, analyzing energy consumption using Design of Experiments (DOE) at the material removal rate (MRR), compare to cutting geometrical trajectories according to CNC parameters such as spindle RPM, feed rate, depth of cut per pass and total depth of cut. Spindle RPM, depth of cut per pass, and feed rate are selected as the main three factors and each factor has two levels: low-level (-) and high-level (+). These experiments have been performed at an end-milling machine by using a concept of a constant volume of material removal processes in the circular and linear geometrical slots in pine wood blocks. Standard energy logger equipment has used to measure energy consumption during end-milling operation. Different statistical analysis, such as ANOVA, regression line, and cause & effect diagram have used to show different energy consumption results in the material removal process. At the end the of data analysis, it is found that a significant amount of electricity demand is associated with machining pre-cutting & post-cutting stage and this significant amount of electricity demand is defined as peripheral energy. This peripheral energy is not involved in the actual performance of material removal process in the end-milling process. In the [Figure 11] end-milling process has been involved with pine wood blocks at constant volume of material removal (2.8 cubic inch) process. Results can be varied using of hard material removal process, such as steel & aluminum metals.

  12. Evaluation of parasitic consumption for a CSP plant

    NASA Astrophysics Data System (ADS)

    Ramorakane, Relebohile John; Dinter, Frank

    2016-05-01

    With the continuous development and desire to build alternative effective and efficient power plants, Concentrated Solar Power (CSP) plants (and more specifically the Parabolic Trough CSP Plants) have proven to be one of the alternative energy resources for the future. On this regard more emphasis and research is being employed to better this power plant technology, where one of the main challenges to these plants is to improve their efficiency by optimizing the parasitic load, wherein one of the major causes of the power plants' reduced overall efficiency arises from their parasitic load consumption. This project is therefore aimed at evaluating the parasitic load on Andasol 3 Power Plant, which is a 50 MW Parabolic Trough Power Plant with a 7.5 hours of full load storage system. It was hence determined that the total power plant's parasitic load consumption is about 12% in summer season and between 16% and 24% in winter season. In an effort to improve the power plant's efficiency, a couple of measures to reduce the parasitic load consumption were recommended, and also an alternative and cheaper source of parasitic load feeding plant, during the day (when the parasitic load consumption is highest) was proposed/recommended.

  13. The Burden of Cancer Attributable to Alcohol Consumption

    PubMed Central

    TESTINO, Gianni

    2011-01-01

    ABSTRACT Many epidemiological studies have demonstrated a correlation between alcohol intake and the occurrence of cancer in humans. All types of alcoholic beverages are associated with an increased risk which suggests that ethanol itself is the crucial compound which causes that effect. The International Agency for Research for Cancer classified alcohol consumption and acetaldehyde associated with alcohol consumption as carcinogenic for humans (group 1): oral cavity, pharynx, larynx, esophagus, colorectal, liver and female breast. The mechanisms by which alcohol consumption exerts its carcinogenic effect have not been defined fully, although plausible events include: a genotoxic effect of acetaldehyde; increased estrogen concentration, which is important for breast carcinogenesis; a role as solvent of tobacco carcinogens; production of reactive oxygen species and nitrogen species; and change in folate metabolism. Most alcohol-induced diseases increases in a linear fashion as intake increases: oral, esophagus and colon cancer fall into this pattern: very little is known about safe margins of alcohol consumption. Given the linear dose-response relation between alcohol intake and risk of cancer, control of heavy drinking remains the main target for cancer control. In healthy subjects, European Code Against Cancer recommends keeping daily consumption within two drinks for man and one drink for women. In our opinion, there are not enough data to support the actually safe intake of alcohol. Any level of alcohol consumption increase the risk of developing an alcohol related cancer. The level of risk increases in line with the level consumption. PMID:22879847

  14. Optimal Energy Consumption Analysis of Natural Gas Pipeline

    PubMed Central

    Liu, Enbin; Li, Changjun; Yang, Yi

    2014-01-01

    There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent. PMID:24955410

  15. Optimal energy consumption analysis of natural gas pipeline.

    PubMed

    Liu, Enbin; Li, Changjun; Yang, Yi

    2014-01-01

    There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent.

  16. On the dynamics of the age structure, dependency, and consumption

    PubMed Central

    Hock, Heinrich

    2013-01-01

    We examine the effects of population aging due to declining fertility and rising elderly life expectancy on consumption possibilities in the presence of intergenerational transfers. Our analysis is based on a highly tractable continuous-time overlapping generations model in which the population is divided into three groups (youth dependents, workers, and elderly dependents) and lifecourse transitions take place in a probabilistic fashion. We show that the consumption-maximizing response to greater longevity in highly developed countries is an increase in fertility. However, with larger transfer payments, the actual fertility response will likely be the opposite, leading to further population aging. PMID:24353374

  17. Improvement of reliability and power consumption for SnSb{sub 4} phase change film composited with Ga{sub 3}Sb{sub 7} by superlattice-like method

    SciTech Connect

    Hu, Yifeng; Zhai, Jiwei; Zeng, Huarong; Song, Sannian; Song, Zhitang

    2015-05-07

    Superlattice-like (SLL) SnSb{sub 4}/Ga{sub 3}Sb{sub 7} (SS/GS) thin films were investigated through in-situ film resistance measurement. The optical band gap was derived from the transmittance spectra by using a UV-visible-NIR (ultraviolet-visible-near infrared) spectrophotometer. Transmission electron microscopy was used to observe the micro-structure before and after annealing. Phase change memory cells based on the SLL [SS(3 nm)/GS(4.5 nm)]{sub 7} thin films were fabricated to test and verify the operation consumption and switching endurance. The scanning thermal microscopy was used to probe the nanoscale thermal property.

  18. Population growth and consumption.

    PubMed

    Chalkley, K

    1997-04-01

    The relationship between population growth, resource consumption, and environmental degradation is complex. The rise in "greenhouse gases" that will cause climatic change is clearly due to human activity, and pollutants are often concentrated in densely populated areas. However, even an area with a negative population growth, such as Russia, can experience severe environmental degradation due to poor management. Consumption patterns have the most effect on ozone depletion, while population growth threatens biodiversity of and within species through the destruction of ecosystems. Migration joins population growth and social factors, such as land inequality, as major causes of deforestation, and global demand for water is expected to increase faster than the rate of population growth. Coastal development and over-fishing threaten to deplete the oceans, while soil quality is threatened by inappropriate land use. Estimates of the earth's carrying capacity range from less than 3 billion to more than 44 billion people, indicating how difficult it is to assess this figure. Development efforts throughout the world may lead to human gains that will ultimately be negated by environmental losses. These factors have led to growing support for environmentally sustainable development.

  19. Patterns of chocolate consumption.

    PubMed

    Seligson, F H; Krummel, D A; Apgar, J L

    1994-12-01

    Although consumed in some form since at least 460 AD, cacao (Theobroma cacao) was not used in confectionery until the 19th century when the cocoa press was invented. Per capita consumption of chocolate confectionery in the United States is moderate (approximately 4.6-4.8 kg/y) compared with that of many northern European countries (approximately 7-10 kg/y). Eleven percent of the US population reported consuming chocolate candy on > or = 1 of the 3 d of recorded food intake in the US Department of Agriculture Nationwide Food Consumption Survey 1987-1988; < 1.0% consumed chocolate every day. The Western region of the United States contained the highest proportion of chocolate consumers. More whites than other racial groups were consumers. Chocolate was consumed by more people in the winter than in other seasons and more was consumed at snacks than at meals. The mean amount of chocolate consumed was approximately 30-90 g/d, depending on sex and age group. Chocolate candy was only a minor contributor (0.7-3.4%) to the overall dietary intake of total energy, fat, saturated fatty acids, and stearic acid.

  20. Economic and safety analysis of unconventional peak regulation on power unit of peak shifting start-stop

    NASA Astrophysics Data System (ADS)

    Cao, X.; Zhao, J. F.; Duan, X. Q.; Jin, Y. A.

    2017-01-01

    Tthe capacity difference of peak regulation between the power gird and the actual demand has become a serious problem considering the growth in the difference between electricity supply and demand. Therefore, peak regulation of power grid needs to be deeply studied. Unconventional peak regulation on unit of peak shifting start-stop is a way that can broaden the range of power regulation, as well as benefit safe operation of the power grid. However, it requires frequent and fast unit start-stop, complex operation, and more staff labor. By carrying out unconventional thermal power unit load test, the start-stop mode of peak auxiliary equipment is studied in this paper, indicating that it has a positive effect on safety and economic of load-peaking operation. The best working conditions of the peak units is found by analysing consumption cost, safety specifications, and life lost of the start-stop peak regulation mode.

  1. Electrical energy consumption control apparatuses and electrical energy consumption control methods

    DOEpatents

    Hammerstrom, Donald J.

    2012-09-04

    Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

  2. Self-Actualization and the Effective Social Studies Teacher.

    ERIC Educational Resources Information Center

    Farmer, Rodney B.

    1980-01-01

    Discusses a study undertaken to investigate the relationship between social studies teachers' degrees of self-actualization and their teacher effectiveness. Investigates validity of using Maslow's theory of self-actualization as a way of identifying the effective social studies teacher personality. (Author/DB)

  3. Self-Actualization Effects Of A Marathon Growth Group

    ERIC Educational Resources Information Center

    Jones, Dorothy S.; Medvene, Arnold M.

    1975-01-01

    This study examined the effects of a marathon group experience on university student's level of self-actualization two days and six weeks after the experience. Gains in self-actualization as a result of marathon group participation depended upon an individual's level of ego strength upon entering the group. (Author)

  4. Self-actualization: Its Use and Misuse in Teacher Education.

    ERIC Educational Resources Information Center

    Ivie, Stanley D.

    1982-01-01

    The writings of Abraham Maslow are analyzed to determine the meaning of the psychological term "self-actualization." After pointing out that self-actualization is a rare quality and that it has little to do with formal education, the author concludes that the concept has little practical relevance for teacher education. (PP)

  5. The Self-Actualization of Polk Community College Students.

    ERIC Educational Resources Information Center

    Pearsall, Howard E.; Thompson, Paul V., Jr.

    This article investigates the concept of self-actualization introduced by Abraham Maslow (1954). A summary of Maslow's Needs Hierarchy, along with a description of the characteristics of the self-actualized person, is presented. An analysis of humanistic education reveals it has much to offer as a means of promoting the principles of…

  6. 26 CFR 1.953-2 - Actual United States risks.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Actual United States risks. 1.953-2 Section 1... (CONTINUED) INCOME TAXES Controlled Foreign Corporations § 1.953-2 Actual United States risks. (a) In general. For purposes of paragraph (a) of § 1.953-1, the term “United States risks” means risks described...

  7. 26 CFR 1.953-2 - Actual United States risks.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 10 2011-04-01 2011-04-01 false Actual United States risks. 1.953-2 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Controlled Foreign Corporations § 1.953-2 Actual United States risks. (a) In general. For purposes of paragraph (a) of § 1.953-1, the term “United States risks” means...

  8. 26 CFR 1.953-2 - Actual United States risks.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 10 2014-04-01 2013-04-01 true Actual United States risks. 1.953-2 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Controlled Foreign Corporations § 1.953-2 Actual United States risks. (a) In general. For purposes of paragraph (a) of § 1.953-1, the term “United States risks” means...

  9. 26 CFR 1.953-2 - Actual United States risks.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 10 2013-04-01 2013-04-01 false Actual United States risks. 1.953-2 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Controlled Foreign Corporations § 1.953-2 Actual United States risks. (a) In general. For purposes of paragraph (a) of § 1.953-1, the term “United States risks” means...

  10. 26 CFR 1.953-2 - Actual United States risks.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 10 2012-04-01 2012-04-01 false Actual United States risks. 1.953-2 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Controlled Foreign Corporations § 1.953-2 Actual United States risks. (a) In general. For purposes of paragraph (a) of § 1.953-1, the term “United States risks” means...

  11. Facebook as a Library Tool: Perceived vs. Actual Use

    ERIC Educational Resources Information Center

    Jacobson, Terra B.

    2011-01-01

    As Facebook has come to dominate the social networking site arena, more libraries have created their own library pages on Facebook to create library awareness and to function as a marketing tool. This paper examines reported versus actual use of Facebook in libraries to identify discrepancies between intended goals and actual use. The results of a…

  12. School Guidance Counselors' Perceptions of Actual and Preferred Job Duties

    ERIC Educational Resources Information Center

    Edwards, John Dexter

    2010-01-01

    The purpose of this study was to provide process data for school counselors, administrators, and the public, regarding school counselors' actual roles within the guidance counselor preferred job duties and actual job duties. In addition, factors including National Certification or no National Certification, years of counseling experience, and…

  13. Comparative Analysis of Thermoeconomic Evaluation Criteria for an Actual Heat Engine

    NASA Astrophysics Data System (ADS)

    Özel, Gülcan; Açıkkalp, Emin; Savaş, Ahmet Fevzi; Yamık, Hasan

    2016-07-01

    In the present study, an actual heat engine is investigated by using different thermoeconomic evaluation criteria in the literature. A criteria that has not been investigated in detail is considered and it is called as ecologico-economical criteria (F_{EC}). It is the difference of power cost and exergy destruction rate cost of the system. All four criteria are applied to an irreversible Carnot heat engine, results are presented numerically and some suggestions are made.

  14. Establishing seasonal chronicles of actual evapotranspiration under sloping conditions

    NASA Astrophysics Data System (ADS)

    Zitouna Chebbi, R.; Prévot, L.; Jacob, F.; Voltz, M.

    2012-04-01

    Estimation of daily and seasonal actual evapotranspiration (ETa) is strongly needed for hydrological and agricultural purposes. Although the eddy covariance method is well suited for such estimation of land surface fluxes, this method suffers from limitations when establishing long time series. Missing data are often encountered, resulting from bad meteorological conditions, rejection by quality control tests, power failures… Numerous gap fill techniques have been proposed in the literature but there applicability in sloping conditions is not well known. In order to estimate ETa over long periods (agricultural cycle) on crops cultivated in sloping areas, a pluri-annual experiment was conducted in the Kamech catchment, located in North-eastern Tunisia. This Mediterranean site is characterized by a large heterogeneity in topography, soils and crops. Land surface fluxes were measured using eddy covariance systems. Measurements were collected on the two opposite sides of the Kamech V-shaped catchment, within small fields having slopes steeper than 5%. During three different years, four crops were studied: durum wheat, oat, fava bean and pasture. The topography of the catchment and the wind regime induced upslope and downslope flows over the study fields. In this study, we showed that gap filling of the turbulent fluxes (sensible and latent heat) can be obtained through linear regressions against net radiation. To account for the effect of the topography, linear regressions were calibrated by distinguishing upslope and downslope flows. This significantly improved the quality of the reconstructed data over 30 minute intervals. This gap filling technique also improved the energy balance closure at the daily time scale. As a result, seasonal chronicles of daily ETa throughout the growth cycle of the study crops in the Kamech watershed were established, thus providing useful information about the water use of annual crops in a semi-arid rainfed and hilly area.

  15. Natural gas consumption prediction in Slovenian industry - a case study

    NASA Astrophysics Data System (ADS)

    Kovačič, Miha; Šarler, Božidar; Župerl, Uroš

    2016-09-01

    In accordance with the regulations of the Energy Agency of the Republic of Slovenia, each natural gas supplier regulates and determines the charges for the differences between the ordered (predicted) and the actually supplied quantities of natural gas. Yearly charges for these differences represent up to 2% of supplied natural gas costs. All the natural gas users, especially industry, have huge problems finding the proper method for efficient natural gas consumption prediction and, consequently, the decreasing of mentioned costs. In this study, prediction of the natural gas consumption in Štore Steel Ltd. (steel plant) is presented. On the basis of production data, several models for natural gas consumption have been developed using linear regression, genetic programming and artificial neural network methods. The genetic programming approach outperformed linear regression and artificial neural networks.

  16. Actual 10-Year Survivors Following Resection of Adrenocortical Carcinoma

    PubMed Central

    Tran, Thuy B.; Postlewait, Lauren M.; Maithel, Shishir K.; Prescott, Jason D.; Wang, Tracy S.; Glenn, Jason; Phay, John E.; Keplinger, Kara; Fields, Ryan C.; Jin, Linda X.; Weber, Sharon M.; Salem, Ahmed; Sicklick, Jason K.; Gad, Shady; Yopp, Adam C.; Mansour, John C.; Duh, Quan-Yang; Seiser, Natalie; Solorzano, Carmen C.; Kiernan, Colleen M.; Votanopoulos, Konstantinos I.; Levine, Edward A.; Hatzaras, Ioannis; Shenoy, Rivfka; Pawlik, Timothy M.; Norton, Jeffrey A.; Poultsides, George A.

    2017-01-01

    Background Adrenocortical carcinoma (ACC) is a rare and aggressive malignancy with limited therapeutic options beyond surgical resection. The characteristics of actual long-term survivors following surgical resection for ACC have not been previously reported. Method Patients who underwent resection for ACC at one of 13 academic institutions participating in the US Adrenocortical Carcinoma Group from 1993 to 2014 were analyzed. Patients were stratified into four groups: early mortality (died within 2 years), late mortality (died within 2–5 years), actual 5-year survivor (survived at least 5 years), and actual 10-year survivor (survived at least 10 years). Patients with less than 5 years of follow-up were excluded. Results Among the 180 patients available for analysis, there were 49 actual 5-year survivors (27%) and 12 actual 10-year survivors (7%). Patients who experienced early mortality had higher rates of cortisol-secreting tumors, nodal metastasis, synchronous distant metastasis, and R1 or R2 resections (all P < 0.05). The need for multi-visceral resection, perioperative blood transfusion, and adjuvant therapy correlated with early mortality. However, nodal involvement, distant metastasis, and R1 resection did not preclude patients from becoming actual 10-year survivors. Ten of twelve actual 10-year survivors were women, and of the seven 10-year survivors who experienced disease recurrence, five had undergone repeat surgery to resect the recurrence. Conclusion Surgery for ACC can offer a 1 in 4 chance of actual 5-year survival and a 1 in 15 chance of actual 10-year survival. Long-term survival was often achieved with repeat resection for local or distant recurrence, further underscoring the important role of surgery in managing patients with ACC. PMID:27633419

  17. Power Generation: The Next 30 Years

    ERIC Educational Resources Information Center

    Holcomb, Robert W.

    1970-01-01

    Discusses pollution problems associated with power production. Estimates power consumption in the 1980's and the availability of fossil and nuclear fuel resources. Emphasizes needed research on air pollution, nuclear pollution, and thermal pollution. (EB)

  18. Impact of electric cars on U.S. petroleum consumption

    NASA Astrophysics Data System (ADS)

    Collins, M. M.; Carriere, W. M.

    1980-02-01

    A computer model that forecasts electricity demand and capacity on an hourly basis for each major electric power company in the United States is used to analyze the potential impact of electric cars on national petroleum consumption in 1980, 1990, and 2000. The analysis, based on 1978 and 1979 growth projections by the industry, shows that if all cars were electrified in the year 2000, autombile petroleum use would be cut by 75 percent, saving 2.5 million barrels of crude oil a day, or 14 percent of future national petroleum consumption. Most cars could be charged overnight from otherwise idle coal and nuclear power plants.

  19. CROSS-DISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY: Simulation of SET Operation in Phase-Change Random Access Memories with Heater Addition and Ring-Type Contactor for Low-Power Consumption by Finite Element Modeling

    NASA Astrophysics Data System (ADS)

    Gong, Yue-Feng; Song, Zhi-Tang; Ling, Yun; Liu, Yan; Feng, Song-Lin

    2009-11-01

    A three-dimensional finite element model for phase change random access memory (PCRAM) is established for comprehensive electrical and thermal analysis during SET operation. The SET behaviours of the heater addition structure (HS) and the ring-type contact in bottom electrode (RIB) structure are compared with each other. There are two ways to reduce the RESET current, applying a high resistivity interfacial layer and building a new device structure. The simulation results indicate that the variation of SET current with different power reduction ways is little. This study takes the RESET and SET operation current into consideration, showing that the RIB structure PCRAM cell is suitable for future devices with high heat efficiency and high-density, due to its high heat efficiency in RESET operation.

  20. Sustainable Consumption and Life Satisfaction

    ERIC Educational Resources Information Center

    Xiao, Jing Jian; Li, Haifeng

    2011-01-01

    The purpose of this study was to examine the association between sustainable consumption and life satisfaction. One aspect of sustainable consumption focused on in this study is the environment friendly purchase or green purchase. Using data collected from consumers in 14 cities in China, we found that consumers who reported green purchase…

  1. Intergenerational Linkages in Consumption Behavior

    ERIC Educational Resources Information Center

    Waldkirch, Andreas; Ng, Serena; Cox, Donald

    2004-01-01

    We investigate familial relationships in consumption patterns using a sample of parents and their children from the Panel Study of Income Dynamics. We find a positive and statistically significant parent-specific effect on children's consumption even after controlling for the effect of parental income. This correlation is found in different…

  2. Electrodermal responses to implied versus actual violence on television.

    PubMed

    Kalamas, A D; Gruber, M L

    1998-01-01

    The electrodermal response (EDR) of children watching a violent show was measured. Particular attention was paid to the type of violence (actual or implied) that prompted an EDR. In addition, the impact of the auditory component (sounds associated with violence) of the show was evaluated. Implied violent stimuli, such as the villain's face, elicited the strongest EDR. The elements that elicited the weakest responses were the actual violent stimuli, such as stabbing. The background noise and voices of the sound track enhanced the total number of EDRs. The results suggest that implied violence may elicit more fear (as measured by EDRs) than actual violence does and that sounds alone contribute significantly to the emotional response to television violence. One should not, therefore, categorically assume that a show with mostly actual violence evokes less fear than one with mostly implied violence.

  3. 40. Photocopy of plan of the Castillo c. 1779 (Actual ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. Photocopy of plan of the Castillo c. 1779 (Actual Negative 4'x5') STAR PLAN, COURTYARD FACADE PROFILE AND DEFENSIVE LINKS - Castillo de San Marcos, 1 Castillo Drive, Saint Augustine, St. Johns County, FL

  4. A consumption value-gap analysis for sustainable consumption.

    PubMed

    Biswas, Aindrila

    2017-01-26

    Recent studies on consumption behavior have depicted environmental apprehension resulting from across wide consumer segments. However, this has not been widely reflected upon the growth in the market shares for green or environment-friendly products mostly because gaps exist between consumers' expectations and perceptions for those products. Previous studies have highlighted the impact of perceived value on potential demand, consumer satisfaction and behavioral intentions. The necessity to understand the effects of gaps in expected and perceived values on consumers' behavioral intention and potential demand for green products cannot be undermined as it shapes the consumers' inclination to repeated purchase and consumption and thus foster potential market demand. Pertaining to this reason, the study aims to adopt a consumption value-gap model based on the theory of consumption values to assess their impact on sustainable consumption behavior and market demand of green products. Consumption value refers to the level of fulfillment of consumer needs by assessment of net utility derived after effective comparison between the benefits (financial or emotional) and the gives (money, time, or energy). The larger the gaps the higher will be the adversarial impact on behavioral intentions. A structural equation modeling was applied to assess data collected through questionnaire survey. The results indicate that functional value-gap and environmental value-gap has the most adversarial impact on sustainable consumption behavior and market demand for green products.

  5. Actuarial and actual analysis of surgical results: empirical validation.

    PubMed

    Grunkemeier, G L; Anderson, R P; Starr, A

    2001-06-01

    This report validates the use of the Kaplan-Meier (actuarial) method of computing survival curves by comparing 12-year estimates published in 1978 with current assessments. It also contrasts cumulative incidence curves, referred to as "actual" analysis in the cardiac-related literature with Kaplan-Meier curves for thromboembolism and demonstrates that with the former estimate the percentage of events that will actually occur.

  6. Wind farm production cost: Optimum turbine size and farm capacity in the actual market

    SciTech Connect

    Laali, A.R.; Meyer, J.L.; Bellot, C.; Louche, A.

    1996-12-31

    Several studies are undertaken in R&D Division of EDF in collaboration with ERASME association in order to have a good knowledge of the wind energy production costs. These studies are performed in the framework of a wind energy monitoring project and concern the influence of a few parameters like wind farm capacity, turbine size and wind speed on production costs, through an analysis of the actual market trend. Some 50 manufacturers and 140 different kind of wind turbines are considered for this study. The minimum production cost is situated at 800/900 kW wind turbine rated power. This point will probably move to more important powers in the future. This study is valid only for average conditions and some special parameters like particular climate conditions or lack of infrastructure for a special site the could modify the results shown on the curves. The variety of wind turbines (rated power as a function of rotor diameter, height and specific rated power) in the actual market is analyzed. A brief analysis of the market trend is also performed. 7 refs., 7 figs.

  7. Wavelet modulation: An alternative modulation with low energy consumption

    NASA Astrophysics Data System (ADS)

    Chafii, Marwa; Palicot, Jacques; Gribonval, Rémi

    2017-02-01

    This paper presents wavelet modulation, based on the discrete wavelet transform, as an alternative modulation with low energy consumption. The transmitted signal has low envelope variations, which induces a good efficiency for the power amplifier. Wavelet modulation is analyzed and compared for different wavelet families with orthogonal frequency division multiplexing (OFDM) in terms of peak-to-average power ratio (PAPR), power spectral density (PSD) properties, and the impact of the power amplifier on the spectral regrowth. The performance in terms of bit error rate and complexity of implementation are also evaluated, and several trade-offs are characterized. xml:lang="fr"

  8. Short-Term Power Fluctuations of Large Wind Power Plants: Preprint

    SciTech Connect

    Wan, Y.; Bucaneg, D.

    2002-01-01

    With electric utilities and other power providers showing increased interest in wind power and with growing penetration of wind capacity into the market, questions about how wind power fluctuations affect power system operations and about wind power's ancillary services requirements are receiving lots of attention. The project's purpose is to acquire actual, long-term wind power output data for analyzing wind power fluctuations, frequency distribution of the changes, the effects of spatial diversity, and wind power ancillary services.

  9. Next Generation Geothermal Power Plants

    SciTech Connect

    Brugman, John; Hattar, Mai; Nichols, Kenneth; Esaki, Yuri

    1995-09-01

    A number of current and prospective power plant concepts were investigated to evaluate their potential to serve as the basis of the next generation geothermal power plant (NGGPP). The NGGPP has been envisaged as a power plant that would be more cost competitive (than current geothermal power plants) with fossil fuel power plants, would efficiently use resources and mitigate the risk of reservoir under-performance, and minimize or eliminate emission of pollutants and consumption of surface and ground water. Power plant concepts were analyzed using resource characteristics at ten different geothermal sites located in the western United States. Concepts were developed into viable power plant processes, capital costs were estimated and levelized busbar costs determined. Thus, the study results should be considered as useful indicators of the commercial viability of the various power plants concepts that were investigated. Broadly, the different power plant concepts that were analyzed in this study fall into the following categories: commercial binary and flash plants, advanced binary plants, advanced flash plants, flash/binary hybrid plants, and fossil/geothed hybrid plants. Commercial binary plants were evaluated using commercial isobutane as a working fluid; both air-cooling and water-cooling were considered. Advanced binary concepts included cycles using synchronous turbine-generators, cycles with metastable expansion, and cycles utilizing mixtures as working fluids. Dual flash steam plants were used as the model for the commercial flash cycle. The following advanced flash concepts were examined: dual flash with rotary separator turbine, dual flash with steam reheater, dual flash with hot water turbine, and subatmospheric flash. Both dual flash and binary cycles were combined with other cycles to develop a number of hybrid cycles: dual flash binary bottoming cycle, dual flash backpressure turbine binary cycle, dual flash gas turbine cycle, and binary gas turbine

  10. Application Power Signature Analysis

    SciTech Connect

    Hsu, Chung-Hsing; Combs, Jacob; Nazor, Jolie; Santiago, Fabian; Thysell, Rachelle; Rivoire, Suzanne; Poole, Stephen W

    2014-01-01

    The high-performance computing (HPC) community has been greatly concerned about energy efficiency. To address this concern, it is essential to understand and characterize the electrical loads of HPC applications. In this work, we study whether HPC applications can be distinguished by their power-consumption patterns using quantitative measures in an automatic manner. Using a collection of 88 power traces from 4 different systems, we find that basic statistical measures do a surprisingly good job of summarizing applications' distinctive power behavior. Moreover, this study opens up a new area of research in power-aware HPC that has a multitude of potential applications.

  11. Alcohol consumption and plasma homocysteine.

    PubMed

    Sakuta, Hidenari; Suzuki, Takashi

    2005-10-01

    A few reports show that consumption of spirits and of wine correlate with elevated plasma total homocysteine (tHcy), which is associated with the risk of cardiovascular disease. We analyzed the relation between tHcy and current daily ethanol consumption cross-sectionally in middle-aged Japanese men (n = 974, age 51-59 years). Plasma tHcy was positively associated with consumption of whiskey but not with consumption of shochu (Japanese spirits), sake, beer, or wine. Odds ratios of an increase in daily intake of 30 ml ethanol (approximately 1 standard deviation) for hyperhomocysteinemia (>14.0 micromol/l) were 2.58 (95% confidence interval, 1.29-5.14) for whiskey, 1.08 (0.78-1.50) for shochu, 0.99 (0.59-1.66) for sake, 0.98 (0.58-1.63) for beer, and 1.70 (0.31-9.50) for wine in a multivariate logistic regression analysis adjusted for the daily number of cigarettes smoked, physical activity, vegetable consumption, and serum creatinine levels. After inclusion of plasma folate and vitamin B12 in the multivariate analysis model, the association between whiskey ethanol consumption and hyperhomocysteinemia remained significant with odds ratio of 2.79 (1.36-5.72). These results suggest that whiskey consumption correlates with hyperhomocysteinemia independently of plasma folate or vitamin B12 or lifestyle factors in the population studied.

  12. Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

    SciTech Connect

    Matsumoto, Hiroyo; Shioji, Norio; Hamasaki, Akihiro

    1995-12-31

    To mitigate CO{sub 2} discharged from thermal power plants, studies on CO{sub 2} fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows: (1) A method is proposed for evaluating the maximum photosynthesis rate in the raceway cultivator using only the algal physical properties; (2) Outdoor cultivation tests taking actual flue gas were performed with no trouble or break throughout 1 yr using the strain collected in the test; (3) The produced microalgae is effective as solid fuel; and (4) The feasibility studies of this system were performed. The system required large land area, but the area is smaller than that required for other biomass systems, such as tree farms.

  13. Neighborhood fast food availability and fast food consumption

    PubMed Central

    Oexle, Nathalie; Barnes, Timothy L; Blake, Christine E; Bell, Bethany A; Liese, Angela D

    2015-01-01

    Recent nutritional and public health research has focused on how the availability of various types of food in a person’s immediate area or neighborhood influences his or her food choices and eating habits. It has been theorized that people living in areas with a wealth of unhealthy fast-food options may show higher levels of fast-food consumption, a factor that often coincides with being overweight or obese. However, measuring food availability in a particular area is difficult to achieve consistently: there may be differences in the strict physical locations of food options as compared to how individuals perceive their personal food availability, and various studies may use either one or both of these measures. The aim of this study was to evaluate the association between weekly fast-food consumption and both a person’s perceived availability of fast-food and an objective measure of fast-food presence—Geographic Information Systems (GIS)—within that person’s neighborhood. A randomly selected population-based sample of eight counties in South Carolina was used to conduct a cross-sectional telephone survey assessing self-report fast-food consumption and perceived availability of fast food. GIS was used to determine the actual number of fast-food outlets within each participant’s neighborhood. Using multinomial logistic regression analyses, we found that neither perceived availability nor GIS-based presence of fast-food was significantly associated with weekly fast-food consumption. Our findings indicate that availability might not be the dominant factor influencing fast-food consumption. We recommend using subjective availability measures and considering individual characteristics that could influence both perceived availability of fast food and its impact on fast-food consumption. If replicated, our findings suggest that interventions aimed at reducing fast-food consumption by limiting neighborhood fast-food availability might not be completely

  14. Neighborhood fast food availability and fast food consumption.

    PubMed

    Oexle, Nathalie; Barnes, Timothy L; Blake, Christine E; Bell, Bethany A; Liese, Angela D

    2015-09-01

    Recent nutritional and public health research has focused on how the availability of various types of food in a person's immediate area or neighborhood influences his or her food choices and eating habits. It has been theorized that people living in areas with a wealth of unhealthy fast-food options may show higher levels of fast-food consumption, a factor that often coincides with being overweight or obese. However, measuring food availability in a particular area is difficult to achieve consistently: there may be differences in the strict physical locations of food options as compared to how individuals perceive their personal food availability, and various studies may use either one or both of these measures. The aim of this study was to evaluate the association between weekly fast-food consumption and both a person's perceived availability of fast-food and an objective measure of fast-food presence - Geographic Information Systems (GIS) - within that person's neighborhood. A randomly selected population-based sample of eight counties in South Carolina was used to conduct a cross-sectional telephone survey assessing self-report fast-food consumption and perceived availability of fast food. GIS was used to determine the actual number of fast-food outlets within each participant's neighborhood. Using multinomial logistic regression analyses, we found that neither perceived availability nor GIS-based presence of fast-food was significantly associated with weekly fast-food consumption. Our findings indicate that availability might not be the dominant factor influencing fast-food consumption. We recommend using subjective availability measures and considering individual characteristics that could influence both perceived availability of fast food and its impact on fast-food consumption. If replicated, our findings suggest that interventions aimed at reducing fast-food consumption by limiting neighborhood fast-food availability might not be completely effective.

  15. Ground Vehicle Power and Mobility

    DTIC Science & Technology

    2010-11-17

    foreign oil – Alternative sources sought – wind, solar , bio-mass, waste to energy • Operational issues – Battery usage & limitations – energy & power...Inefficient management/ distribution of power – Demand for soldier- wearable power • Increased emphasis on system power metrics (KPPs, low consumption...Full Vehicle Environmental Test Cell – Ambient temperature control to 160°F – Solar load simulation – Wind speeds up to 20mph in eight possible

  16. Reactive power compensating system

    DOEpatents

    Williams, Timothy J.; El-Sharkawi, Mohamed A.; Venkata, Subrahmanyam S.

    1987-01-01

    The reactive power of an induction machine is compensated by providing fixed capacitors on each phase line for the minimum compensation required, sensing the current on one line at the time its voltage crosses zero to determine the actual compensation required for each phase, and selecting switched capacitors on each line to provide the balance of the compensation required.

  17. Validating the plate mapping method: Comparing drawn foods and actual foods of university students in a cafeteria.

    PubMed

    Sharp, David E

    2016-05-01

    To examine effects of plate size on meals, I developed a method I label plate mapping. To validate plate mapping, a quasi-experimental between participants study was conducted that asked university students to accurately draw their lunch meal. Participants were randomized into groups where they were asked either pre-consumption or post-consumption to draw their lunch on either a 9″ or 11″ paper plate. Coding plate drawings for total meal size revealed that students drew bigger meals on larger plates and participant meal size drawings were more accurate when the plate provided was the same size as the meal plate used. Gender moderated meal size drawings, with women generally drawing meals that were more highly correlated and similarly sized to actual meals when compared to the drawings of men. Overall, the size of plate drawings was highly correlated with the size of actual foods, which provides support for the validity of the method of plate mapping. These findings suggest that plate mapping can be applied to estimate meal size and assess sensitivity to plate size. Gaining a better understanding of the mechanisms and processes that influence food consumption habits can help increase awareness of these cues for both academics as well as for consumers of food and benefit short- and long-term health goals.

  18. Nuclear Power in Japan.

    ERIC Educational Resources Information Center

    Powell, John W.

    1983-01-01

    Energy consumption in Japan has grown at a faster rate than in any other major industrial country. To maintain continued prosperity, the government has embarked on a crash program for nuclear power. Current progress and issues/reactions to the plan are discussed. (JN)

  19. Energy consumption in buildings and female thermal demand

    NASA Astrophysics Data System (ADS)

    Kingma, Boris; van Marken Lichtenbelt, Wouter

    2015-12-01

    Energy consumption of residential buildings and offices adds up to about 30% of total carbon dioxide emissions; and occupant behaviour contributes to 80% of the variation in energy consumption. Indoor climate regulations are based on an empirical thermal comfort model that was developed in the 1960s (ref. ). Standard values for one of its primary variables--metabolic rate--are based on an average male, and may overestimate female metabolic rate by up to 35% (ref. ). This may cause buildings to be intrinsically non-energy-efficient in providing comfort to females. Therefore, we make a case to use actual metabolic rates. Moreover, with a biophysical analysis we illustrate the effect of miscalculating metabolic rate on female thermal demand. The approach is fundamentally different from current empirical thermal comfort models and builds up predictions from the physical and physiological constraints, rather than statistical association to thermal comfort. It provides a substantiation of the thermal comfort standard on the population level and adds flexibility to predict thermal demand of subpopulations and individuals. Ultimately, an accurate representation of thermal demand of all occupants leads to actual energy consumption predictions and real energy savings of buildings that are designed and operated by the buildings services community.

  20. Subjective and objective effects of coffee consumption - caffeine or expectations?

    PubMed

    Dömötör, Zs; Szemerszky, R; Köteles, F

    2015-03-01

    Impact of 5 mg/kg caffeine, chance of receiving caffeine (stimulus expectancies), and expectations of effects of caffeine (response expectancies) on objective (heart rate (HR), systolic/diastolic blood pressure (SBP/DBP), measures of heart rate variability (HRV), and reaction time (RT)) and subjective variables were investigated in a double-blind, placebo-controlled experiment with a no-treatment group. Participants were 107 undergraduate university students (mean age 22.3 ± 3.96 years). Consumption of 5 mg/kg caffeine had an impact on participants' SBP, standard deviation of normal heartbeat intervals, HR (decrease), and subjective experience 40 minutes later even after controlling for respective baseline values, stimulus and response expectancies, and habitual caffeine consumption. No effects on DBP, high frequency component of HRV, the ratio of low- and high-frequency, and RT were found. Beyond actual caffeine intake, response expectancy score was also a determinant of subjective experience which refers to a placebo component in the total effect. Actual autonomic (SBP, HR) changes and somatosensory amplification tendency, however, had no significant impact on subjective experience. Placebo reaction plays a role in the subjective changes caused by caffeine consumption but it has no impact on objective variables. Conditional vs deceptive administration of caffeine (i.e. stimulus expectancies) had no impact on any assessed variable.

  1. Alcohol consumption on pancreatic diseases.

    PubMed

    Herreros-Villanueva, Marta; Hijona, Elizabeth; Bañales, Jesus Maria; Cosme, Angel; Bujanda, Luis

    2013-02-07

    Although the association between alcohol and pancreatic diseases has been recognized for a long time, the impact of alcohol consumption on pancreatitis and pancreatic cancer (PC) remains poorly defined. Nowadays there is not consensus about the epidemiology and the beverage type, dose and duration of alcohol consumption causing these diseases. The objective of this study was to review the epidemiology described in the literature for pancreatic diseases as a consequence of alcoholic behavior trying to understand the association between dose, type and frequency of alcohol consumption and risk of pancreatitis and PC. The majority of the studies conclude that high alcohol intake was associated with a higher risk of pancreatitis (around 2.5%-3% between heavy drinkers and 1.3% between non drinkers). About 70% of pancreatitis are due to chronic heavy alcohol consumption. Although this incidence rate differs between countries, it is clear that the risk of developing pancreatitis increases with increasing doses of alcohol and the average of alcohol consumption vary since 80 to 150 g/d for 10-15 years. With regard to PC, the role of alcohol consumption remains less clear, and low to moderate alcohol consumption do not appear to be associated with PC risk, and only chronic heavy drinking increase the risk compared with lightly drinkers. In a population of 10%-15% of heavy drinkers, 2%-5% of all PC cases could be attributed to alcohol consumption. However, as only a minority (less than 10% for pancreatitis and 5% for PC) of heavily drinkers develops these pancreatic diseases, there are other predisposing factors besides alcohol involved. Genetic variability and environmental exposures such as smoking and diet modify the risk and should be considered for further investigations.

  2. Caffeine consumption in young children.

    PubMed

    Warzak, William J; Evans, Shelby; Floress, Margaret T; Gross, Amy C; Stoolman, Sharon

    2011-03-01

    Two hundred twenty-eight surveyed parents reported that their 5 to 7 year old children drank approximately 52 mg of caffeine daily and their 8 to 12 year old children drank 109 mg daily. Caffeine consumption and hours slept were significantly negatively correlated, but caffeine consumption and enuresis were not significantly correlated. Spanish-speaking parents reported fewer bedwetting events than their English-speaking peers.

  3. Manufacturing consumption of energy 1991

    SciTech Connect

    Not Available

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  4. Daily practices, consumption and citizenship.

    PubMed

    Mazzarino, Jane M; Morigi, Valdir J; Kaufmann, Cristine; Farias, Alessandra M B; Fernandes, Diefersom A

    2011-12-01

    This paper promotes a reflection on the relationship between daily practices and consumption. Understanding how conflicts, resistance and consensus are generated from daily consumption practices opens up possibilities for reflecting on the construction of sustainability in the context of diversity, one of the landmarks of the globalized world. Within this socio-cultural context, the central issue is: can consumption generate citizenship practices? The concepts of subject and agent help one think about collective action and subjectivation processes and their interferences on the collective consuming behavior. Based on empirical data from a research carried out in the municipality of Estrela in 2007, in the Taquari Valley - Rio Grande do Sul (Southern Brazil) on local reality consumption practices, it was possible to conclude that various reasoning mechanisms and values underlie the daily consumption practices. Citizenship construction, based on consumption practices, depends on the subject's reflection capacity on his/her daily practices or on what goes through the circulation of environmental information based on sociability spaces.

  5. Alcohol Consumption in Demographic Subpopulations

    PubMed Central

    Delker, Erin; Brown, Qiana; Hasin, Deborah S.

    2016-01-01

    Alcohol consumption is common across subpopulations in the United States. However, the health burden associated with alcohol consumption varies across groups, including those defined by demographic characteristics such as age, race/ethnicity, and gender. Large national surveys, such as the National Epidemiologic Survey on Alcohol and Related Conditions and the National Survey on Drug Use and Health, found that young adults ages 18–25 were at particularly high risk of alcohol use disorder and unintentional injury caused by drinking. These surveys furthermore identified significant variability in alcohol consumption and its consequences among racial/ethnic groups. White respondents reported the highest prevalence of current alcohol consumption, whereas alcohol abuse and dependence were most prevalent among Native Americans. Native Americans and Blacks also were most vulnerable to alcohol-related health consequences. Even within ethnic groups, there was variability between and among different subpopulations. With respect to gender, men reported more alcohol consumption and binge drinking than women, especially in older cohorts. Men also were at greater risk of alcohol abuse and dependence, liver cirrhosis, homicide after alcohol consumption, and drinking and driving. Systematic identification and measurement of the variability across demographics will guide prevention and intervention efforts, as well as future research. PMID:27159807

  6. Nodal Network Modelling by Integrating Remote Sensing Derived Actual Evapotranspiration with Spatial Water Balance in a Demand Driven Irrigation System

    NASA Astrophysics Data System (ADS)

    Ullah, Kaleem; Hafeez, Mohsin; Sixsmith, Josh; Faux, Ralph

    2010-05-01

    The long-term sustainability of water for agriculture is in doubt in many regions of the world. The major withdrawals of water are for agriculture, industry, and domestic consumption. Irrigated agriculture is major consumer of fresh water, but a large part of the water devour for irrigation is wasted due to poor management of irrigation systems. Improving water management in irrigated areas and assessment of irrigation performance are critical activities for this endeavour. These activities are needed not only to improve water productivity, but also to increase the sustainability of irrigated agriculture and improving the irrigation efficiency. The improvement of the water use efficiency entail the complete understanding of various components of water balances such as rainfall, surface water, groundwater and evapotranspiration (ET). Evapotranspiration is the overriding aspect of water balance at farm to catchment scale. Many models have been used to measure the Evapotranspiration rate, either empirical or functional. The major disadvantage of this approach is that most methods generate only point values, resulting in estimates that are not representative of large areas. These methods are based on crop factors under ideal conditions and cannot therefore represent actual crop ET. Satellite remote sensing is a powerful mean to estimate ET over various spatial and temporal scales. The use of remote sensing techniques to estimate ET is achieved by solving the energy balance thermodynamics fluxes at the surface of the earth. For improved irrigation system management and operation, a holistic approach of integrating remote sensing derived ET from SAM-ET (spatial algorithm for mapping evapotranspiration) algorithm, for Australian agro-ecosystem with spatial water balance by using nodal network model was applied to evaluate agricultural water management in Coleambally Irrigation Area (CIA), New South Wales, Australia. It covers approximately 79,000 ha of intensive

  7. Self-reported vs. actual energy intake in youth with and without loss of control eating.

    PubMed

    Wolkoff, Laura E; Tanofsky-Kraff, Marian; Shomaker, Lauren B; Kozlosky, Merel; Columbo, Kelli M; Elliott, Camden A; Ranzenhofer, Lisa M; Osborn, Robyn L; Yanovski, Susan Z; Yanovski, Jack A

    2011-01-01

    Episodes of loss of control over eating (LOC) in children and adolescents--often characterized by the consumption of highly palatable dessert and snack-type foods--have been associated with a lack of awareness while eating that could lead to under- or over-estimation of how much food is consumed. However, little is known about the reporting accuracy of food intake in youth with and without LOC eating. One hundred fifty-six girls and boys were administered the Eating Disorder Examination to assess for the presence of LOC eating. Youth were queried regarding the amounts of foods consumed directly following a multi-item, laboratory buffet test meal. Children with LOC (n=42) did not differ significantly from youth without LOC (n=114) in reporting accuracy of total food intake (reported minus actual energy intake: 153.0 ± 59.6 vs. 96.9 ± 36.0 kcal; p=0.42). However, compared to those without LOC, children with LOC were less accurate at reporting percentage of energy intake from carbohydrate (p=0.01). Youth with LOC were also less accurate at reporting their intake of desserts (p=0.04). Findings point to the possibility that youth with LOC may have poorer recall of sweet food consumption. Future research is required to examine whether poorer recall reflects a lack of awareness while eating palatable, sweet foods.

  8. Human biomonitoring to optimize fish consumption advice: reducing uncertainty when evaluating benefits and risks.

    PubMed

    Arnold, Scott M; Lynn, Tracey V; Verbrugge, Lori A; Middaugh, John P

    2005-03-01

    National fish consumption advisories that are based solely on assessment of risk of exposure to contaminants without consideration of consumption benefits result in overly restrictive advice that discourages eating fish even in areas where such advice is unwarranted. In fact, generic fish advisories may have adverse public health consequences because of decreased fish consumption and substitution of foods that are less healthy. Public health is on the threshold of a new era for determining actual exposures to environmental contaminants, owing to technological advances in analytical chemistry. It is now possible to target fish consumption advice to specific at-risk populations by evaluating individual contaminant exposures and health risk factors. Because of the current epidemic of nutritionally linked disease, such as obesity, diabetes, and cardiovascular disease, general recommendations for limiting fish consumption are ill conceived and potentially dangerous.

  9. Analysis of theoretical and real values of heat consumption in units of the apartment building

    NASA Astrophysics Data System (ADS)

    Pavloková, Petra; Richter, Aleš; Janša, Jan

    2016-06-01

    This article is focused on heat consumption in the apartment building and the factors affecting it. The apartment building has three entrances and four over ground floors and one underground floor. In the entire apartment building there are 24 flats, which they are identical (kitchen, bedroom, living room and bathroom). In flats on radiators were installed the ratio heat meters according to Act 318/2012 Coll. by the Metrology Act. The ratio heat meters are used for fair billing of the heat costs for all owners. Continuous monitoring of the actual heat consumption in the flats were collected data of the real heat consumption. The theoretical values of heat consumption were counted in software ENERGIE. The apartment building is divided into24 flats and the calculation was made for each of them. The theoretical and real heat consumption was compared.

  10. Assessment of Housing Energy Consumption in Turkey

    NASA Astrophysics Data System (ADS)

    Yerel Kandemir, Suheyla; Erdem Çerçevik, Ali; Ankara, Huseyin; Ozgur Yayli, M.

    2016-10-01

    In this study, we analyze housing energy consumption in Turkey. The energy consumption is evaluated by using the multivariate techniques such as cluster analysis and multidimensional scaling (MDS) analysis. The number of clusters for housing energy consumption was selected as five years. Finally, cluster and MDS analysis results show that the 2009 and 2010 was the most similar consumption years in housing energy consumption. Finally, this paper present that the usefulness of cluster and MDS analysis for assessment in the energy consumption.

  11. Power Measurement Methods for Energy Efficient Applications

    PubMed Central

    Calandrini, Guilherme; Gardel, Alfredo; Bravo, Ignacio; Revenga, Pedro; Lázaro, José L.; Toledo-Moreo, F. Javier

    2013-01-01

    Energy consumption constraints on computing systems are more important than ever. Maintenance costs for high performance systems are limiting the applicability of processing devices with large dissipation power. New solutions are needed to increase both the computation capability and the power efficiency. Moreover, energy efficient applications should balance performance vs. consumption. Therefore power data of components are important. This work presents the most remarkable alternatives to measure the power consumption of different types of computing systems, describing the advantages and limitations of available power measurement systems. Finally, a methodology is proposed to select the right power consumption measurement system taking into account precision of the measure, scalability and controllability of the acquisition system. PMID:23778191

  12. Inconsistent Investment and Consumption Problems

    SciTech Connect

    Kronborg, Morten Tolver; Steffensen, Mogens

    2015-06-15

    In a traditional Black–Scholes market we develop a verification theorem for a general class of investment and consumption problems where the standard dynamic programming principle does not hold. The theorem is an extension of the standard Hamilton–Jacobi–Bellman equation in the form of a system of non-linear differential equations. We derive the optimal investment and consumption strategy for a mean-variance investor without pre-commitment endowed with labor income. In the case of constant risk aversion it turns out that the optimal amount of money to invest in stocks is independent of wealth. The optimal consumption strategy is given as a deterministic bang-bang strategy. In order to have a more realistic model we allow the risk aversion to be time and state dependent. Of special interest is the case were the risk aversion is inversely proportional to present wealth plus the financial value of future labor income net of consumption. Using the verification theorem we give a detailed analysis of this problem. It turns out that the optimal amount of money to invest in stocks is given by a linear function of wealth plus the financial value of future labor income net of consumption. The optimal consumption strategy is again given as a deterministic bang-bang strategy. We also calculate, for a general time and state dependent risk aversion function, the optimal investment and consumption strategy for a mean-standard deviation investor without pre-commitment. In that case, it turns out that it is optimal to take no risk at all.

  13. Automotive Gas Turbine Power System-Performance Analysis Code

    NASA Technical Reports Server (NTRS)

    Juhasz, Albert J.

    1997-01-01

    An open cycle gas turbine numerical modelling code suitable for thermodynamic performance analysis (i.e. thermal efficiency, specific fuel consumption, cycle state points, working fluid flowrates etc.) of automotive and aircraft powerplant applications has been generated at the NASA Lewis Research Center's Power Technology Division. The use this code can be made available to automotive gas turbine preliminary design efforts, either in its present version, or, assuming that resources can be obtained to incorporate empirical models for component weight and packaging volume, in later version that includes the weight-volume estimator feature. The paper contains a brief discussion of the capabilities of the presently operational version of the code, including a listing of input and output parameters and actual sample output listings.

  14. Bringing Environmentalism Home: Children's Influence on Family Consumption in the Nordic Countries and beyond

    ERIC Educational Resources Information Center

    Larsson, Bengt; Andersson, Magnus; Osbeck, Christina

    2010-01-01

    This article discusses children as contributors to sustainable ecological development. The aim of the article is to develop a framework for researching two questions: What are the prerequisites for children to become responsible environmentalists? What actual and potential influence do children have on their family's consumption? Three theoretical…

  15. Progressive Digressions: Home Schooling for Self-Actualization.

    ERIC Educational Resources Information Center

    Rivero, Lisa

    2002-01-01

    Maslow's (1971) theory of primary creativeness is used as the basis for a self-actualization model of education. Examples of how to use the model in creative homeschooling are provided. Key elements include digressive and immersion learning, self-directed learning, and the integration of work and play. Teaching suggestions are provided. (Contains…

  16. A Taxometric Analysis of Actual Internet Sports Gambling Behavior

    ERIC Educational Resources Information Center

    Braverman, Julia; LaBrie, Richard A.; Shaffer, Howard J.

    2011-01-01

    This article presents findings from the first taxometric study of actual gambling behavior to determine whether we can represent the characteristics of extreme gambling as qualitatively distinct (i.e., taxonic) or as a point along a dimension. We analyzed the bets made during a 24-month study period by the 4,595 most involved gamblers among a…

  17. William Brennan and the Failed "Theory" of Actual Malice.

    ERIC Educational Resources Information Center

    Gillmor, Donald M.

    This paper contains an analysis of Justice William Brennan's Supreme Court opinions concerning cases on freedom of expression and his interpretations of Alexander Meiklejohn's theory of actual malice in cases of libel. Particular attention is paid to Brennan's landmark contribution to the law of libel, his opinion in "New York Times v.…

  18. MLCMS Actual Use, Perceived Use, and Experiences of Use

    ERIC Educational Resources Information Center

    Asiimwe, Edgar Napoleon; Grönlund, Åke

    2015-01-01

    Mobile learning involves use of mobile devices to participate in learning activities. Most e-learning activities are available to participants through learning systems such as learning content management systems (LCMS). Due to certain challenges, LCMS are not equally accessible on all mobile devices. This study investigates actual use, perceived…

  19. Venture actualization in nursing. An analysis of innovation.

    PubMed

    Neidlinger, S H; Bartleson, B J; Drews, N; Hukari, D

    1992-01-01

    From innovations shared by nurse executives and nurse intrapreneurs in acute care hospitals, The Venture Actualization in Nursing Model emerged. Derived from a nursing perspective, this model captures the steps of the nurse innovation process, linking the nurse executive and nurse intrapreneur role components to the process that leads to venture success.

  20. Comparison of Actual Surgical Outcomes and 3D Surgical Simulations

    PubMed Central

    Tucker, Scott; Cevidanes, Lucia; Styner, Martin; Kim, Hyungmin; Reyes, Mauricio; Proffit, William; Turvey, Timothy

    2009-01-01

    Purpose The advent of imaging software programs have proved to be useful for diagnosis, treatment planning, and outcome measurement, but precision of 3D surgical simulation still needs to be tested. This study was conducted to determine if the virtual surgery performed on 3D models constructed from Cone-beam CT (CBCT) can correctly simulate the actual surgical outcome and to validate the ability of this emerging technology to recreate the orthognathic surgery hard tissue movements in 3 translational and 3 rotational planes of space. Methods Construction of pre- and post-surgery 3D models from CBCTs of 14 patients who had combined maxillary advancement and mandibular setback surgery and 6 patients who had one-piece maxillary advancement surgery was performed. The post-surgery and virtually simulated surgery 3D models were registered at the cranial base to quantify differences between simulated and actual surgery models. Hotelling T-test were used to assess the differences between simulated and actual surgical outcomes. Results For all anatomic regions of interest, there was no statistically significant difference between the simulated and the actual surgical models. The right lateral ramus was the only region that showed a statistically significant, but small difference when comparing two- and one-jaw surgeries. Conclusions Virtual surgical methods were reliably reproduced, oral surgery residents could benefit from virtual surgical training, and computer simulation has the potential to increase predictability in the operating room. PMID:20591553

  1. 24 CFR 200.96 - Certificates of actual cost.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Requirements for Application, Commitment, and... Continuing Eligibility Requirements for Existing Projects Cost Certification § 200.96 Certificates of actual... before final endorsement, except that in the case of an existing project that does not...

  2. 24 CFR 200.96 - Certificates of actual cost.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Requirements for Application, Commitment, and... Continuing Eligibility Requirements for Existing Projects Cost Certification § 200.96 Certificates of actual... before final endorsement, except that in the case of an existing project that does not...

  3. Computer/PERT technique monitors actual versus allocated costs

    NASA Technical Reports Server (NTRS)

    Houry, E.; Walker, J. D.

    1967-01-01

    A computer method measures the users performance in cost-type contracts utilizing the existing nasa program evaluation review technique without imposing any additional reporting requirements. progress is measured by comparing actual costs with a value of work performed in a specific period.

  4. Student Exposure to Actual Patients in the Classroom.

    ERIC Educational Resources Information Center

    Chisholm, Marie A.; McCall, Charles Y.; Francisco, George E., Jr.; Poirier, Sylvie

    1997-01-01

    Two clinical courses for first-year dental students were designed to develop students' interaction skills through actual patient case presentations and discussions and an interdisciplinary teaching approach. Results indicate students preferred the case presentations, with or without lecture, to the lecture-only approach and felt they learned more…

  5. Fair Equality of Opportunity in Our Actual World

    ERIC Educational Resources Information Center

    Sachs, Benjamin

    2016-01-01

    Fair equality of opportunity, a principle that governs the competition for desirable jobs, can seem irrelevant in our actual world, for two reasons. First, parents have broad liberty to raise their children as they see fit, which seems to undermine the fair equality of opportunity-based commitment to eliminating the effects of social circumstances…

  6. Actualizing Concepts in Home Management: Proceedings of a National Conference.

    ERIC Educational Resources Information Center

    American Home Economics Association, Washington, DC.

    The booklet prints the following papers delivered at a national conference: Actualizing Concepts in Home Management: Decision Making, Dorothy Z. Price; Innovations in Teaching: Ergonomics, Fern E. Hunt; Relevant Concepts of Home Management: Innovations in Teaching, Kay P. Edwards; Standards in a Managerial Context, Florence S. Walker; Organizing:…

  7. Actual ET modelling based on the Budyko framework and the sustainability of vegetation water use in the loess plateau.

    PubMed

    Gao, Xuerui; Sun, Miao; Zhao, Qi; Wu, Pute; Zhao, Xining; Pan, Wenxiang; Wang, Yubao

    2017-02-01

    Jointly influenced by the natural factors and the artificial protection measures, the ecological environment of Loess Plateau has been significantly improved in recent years, but which has already brought about some water-related problems. To maintain the balance between precipitation and water consumption is an important foundation for sustainable development of the ecology remediation. This study used Budyko Framework to simulate the actual water consumption of 161 sub-basins from 1990 to 2014. Based on the simulation results, the research also analyzed the evolution characteristics of water balance in Loess Plateau from 1990 to 2014. Results show that, with the increase of vegetation coverage, the regional precipitation and actual evapotranspiration were both showing a significant increasing trend, and the increasing rate of precipitation was 1.91mm/a on average, which was greater than the increasing rate of actual evapotranspiration of 1.34mm/a. To further demonstrate the water balance regime in Loess Plateau, the evapotranspiration coefficient (ECC) was used to quantitatively indicate the ratio of the vegetation water consumption and the total precipitation. The average values of ECC were 0.868, 0.863, 0.851 and 0.837 respectively in four sub-periods of 1990-1999, 2000-2004, 2005-2009 and 2010-2014. The above analyses indicate that with the vegetation recovery and ecological restoration, the percentage of evapotranspiration in the total precipitation is keeping decreasing and in turn the percentage of water yield in the total precipitation is keeping increasing. Consequently, it seems more sustainable for vegetation water use in most areas of Loess Plateau currently.

  8. Controlled cooling of an electronic system for reduced energy consumption

    DOEpatents

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2016-08-09

    Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

  9. [Personality factors as predictors of alcohol consumption by university students].

    PubMed

    Natividade, Jean Carlos; Aguirre, Alba Recalde; Bizarro, Lisiane; Hutz, Claudio Simon

    2012-06-01

    This study aimed to verify differences in personality factors between abstainers and drinkers and between individuals with higher versus lower levels of alcohol consumption in the previous three months, and to test the predictive power of factors for any lifetime alcohol consumption and for at least monthly alcohol consumption. A total of 169 university students participated, of whom 66.7% were women, with a mean age of 21.2 years. Lifetime alcohol consumption was 90.1%; 42.3% had consumed at least twice in the previous three months; and 57.7% consumed alcohol at least monthly. Participants with less frequent consumption in the previous three months showed higher mean scores for personality factors involving socialization and achievement, while those that consumed more frequently scored higher on extroversion. A predictive model showed that increments in extroversion contributed to increased odds of drinking alcohol, while increments in achievement decreased the odds of drinking. Personality characteristics were able to distinguish between different groups of drinkers and predict the frequency of alcohol consumption.

  10. Practical application of the benchmarking technique to increase reliability and efficiency of power installations and main heat-mechanic equipment of thermal power plants

    NASA Astrophysics Data System (ADS)

    Rimov, A. A.; Chukanova, T. I.; Trofimov, Yu. V.

    2016-12-01

    Data on the comparative analysis variants of the quality of power installations (benchmarking) applied in the power industry is systematized. It is shown that the most efficient variant of implementation of the benchmarking technique is the analysis of statistical distributions of the indicators in the composed homogenous group of the uniform power installations. The benchmarking technique aimed at revealing the available reserves on improvement of the reliability and heat efficiency indicators of the power installations of the thermal power plants is developed in the furtherance of this approach. The technique provides a possibility of reliable comparison of the quality of the power installations in their homogenous group limited by the number and adoption of the adequate decision on improving some or other technical characteristics of this power installation. The technique provides structuring of the list of the comparison indicators and internal factors affecting them represented according to the requirements of the sectoral standards and taking into account the price formation characteristics in the Russian power industry. The mentioned structuring ensures traceability of the reasons of deviation of the internal influencing factors from the specified values. The starting point for further detail analysis of the delay of the certain power installation indicators from the best practice expressed in the specific money equivalent is positioning of this power installation on distribution of the key indicator being a convolution of the comparison indicators. The distribution of the key indicator is simulated by the Monte-Carlo method after receiving the actual distributions of the comparison indicators: specific lost profit due to the short supply of electric energy and short delivery of power, specific cost of losses due to the nonoptimal expenditures for repairs, and specific cost of excess fuel equivalent consumption. The quality loss indicators are developed

  11. Meat Consumption Culture in Ethiopia

    PubMed Central

    Jo, Cheorun

    2014-01-01

    The consumption of animal flesh food in Ethiopia has associated with cultural practices. Meat plays pivotal and vital parts in special occasions and its cultural symbolic weight is markedly greater than that accorded to most other food. Processing and cooking of poultry is a gender based duty and has socio-cultural roles. Ethiopians are dependent on limited types of animals for meats due to the taboo associated culturally. Moreover, the consumption of meat and meat products has a very tidy association with religious beliefs, and are influenced by religions. The main religions of Ethiopia have their own peculiar doctrines of setting the feeding habits and customs of their followers. They influence meat products consumption through dictating the source animals that should be used or not be used for food, and scheduling the days of the years in periodical permeation and restriction of consumptions which in turn influences the pattern of meat consumption in the country. In Ethiopia, a cow or an ox is commonly butchered for the sole purpose of selling within the community. In special occasions, people have a cultural ceremony of slaughtering cow or ox and sharing among the group, called Kircha, which is a very common option of the people in rural area where access of meat is challenging frequently. PMID:26760739

  12. Process for Generating Engine Fuel Consumption Map: Future Atkinson Engine with Cooled EGR and Cylinder Deactivation

    EPA Pesticide Factsheets

    This document summarizes the process followed to utilize GT-POWER modeled engine and laboratory engine dyno test data to generate a full engine fuel consumption map which can be used by EPA's ALPHA vehicle simulations.

  13. Access to Supermarkets and Fruit and Vegetable Consumption

    PubMed Central

    Cook, Andrea J.; Jiao, Junfeng; Seguin, Rebecca A.; Vernez Moudon, Anne; Hurvitz, Philip M.; Drewnowski, Adam

    2014-01-01

    Objectives. We examined whether supermarket choice, conceptualized as a proxy for underlying personal factors, would better predict access to supermarkets and fruit and vegetable consumption than mere physical proximity. Methods. The Seattle Obesity Study geocoded respondents’ home addresses and locations of their primary supermarkets. Primary supermarkets were stratified into low, medium, and high cost according to the market basket cost of 100 foods. Data on fruit and vegetable consumption were obtained during telephone surveys. Linear regressions examined associations between physical proximity to primary supermarkets, supermarket choice, and fruit and vegetable consumption. Descriptive analyses examined whether supermarket choice outweighed physical proximity among lower-income and vulnerable groups. Results. Only one third of the respondents shopped at their nearest supermarket for their primary food supply. Those who shopped at low-cost supermarkets were more likely to travel beyond their nearest supermarket. Fruit and vegetable consumption was not associated with physical distance but, with supermarket choice, after adjusting for covariates. Conclusions. Mere physical distance may not be the most salient variable to reflect access to supermarkets, particularly among those who shop by car. Studies on food environments need to focus beyond neighborhood geographic boundaries to capture actual food shopping behaviors. PMID:24625173

  14. Intertemporal consumption with directly measured welfare functions and subjective expectations

    PubMed Central

    Kapteyn, Arie; Kleinjans, Kristin J.; van Soest, Arthur

    2010-01-01

    Euler equation estimation of intertemporal consumption models requires many, often unverifiable assumptions. These include assumptions on expectations and preferences. We aim at reducing some of these requirements by using direct subjective information on respondents’ preferences and expectations. The results suggest that individually measured welfare functions and expectations have predictive power for the variation in consumption across households. Furthermore, estimates of the intertemporal elasticity of substitution based on the estimated welfare functions are plausible and of a similar order of magnitude as other estimates found in the literature. The model favored by the data only requires cross-section data for estimation. PMID:20442798

  15. Moral Violations Reduce Oral Consumption

    PubMed Central

    Chan, Cindy; Van Boven, Leaf; Andrade, Eduardo B.; Ariely, Dan

    2014-01-01

    Consumers frequently encounter moral violations in everyday life. They watch movies and television shows about crime and deception, hear news reports of corporate fraud and tax evasion, and hear gossip about cheaters and thieves. How does exposure to moral violations influence consumption? Because moral violations arouse disgust and because disgust is an evolutionarily important signal of contamination that should provoke a multi-modal response, we hypothesize that moral violations affect a key behavioral response to disgust: reduced oral consumption. In three experiments, compared with those in control conditions, people drank less water and chocolate milk while (a) watching a film portraying the moral violations of incest, (b) writing about moral violations of cheating or theft, and (c) listening to a report about fraud and manipulation. These findings imply that “moral disgust” influences consumption in ways similar to core disgust, and thus provide evidence for the associations between moral violations, emotions, and consumer behavior. PMID:25125931

  16. Moral Violations Reduce Oral Consumption.

    PubMed

    Chan, Cindy; Van Boven, Leaf; Andrade, Eduardo B; Ariely, Dan

    2014-07-01

    Consumers frequently encounter moral violations in everyday life. They watch movies and television shows about crime and deception, hear news reports of corporate fraud and tax evasion, and hear gossip about cheaters and thieves. How does exposure to moral violations influence consumption? Because moral violations arouse disgust and because disgust is an evolutionarily important signal of contamination that should provoke a multi-modal response, we hypothesize that moral violations affect a key behavioral response to disgust: reduced oral consumption. In three experiments, compared with those in control conditions, people drank less water and chocolate milk while (a) watching a film portraying the moral violations of incest, (b) writing about moral violations of cheating or theft, and (c) listening to a report about fraud and manipulation. These findings imply that "moral disgust" influences consumption in ways similar to core disgust, and thus provide evidence for the associations between moral violations, emotions, and consumer behavior.

  17. Computer simulated building energy consumption for verification of energy conservation measures in network facilities

    NASA Technical Reports Server (NTRS)

    Plankey, B.

    1981-01-01

    A computer program called ECPVER (Energy Consumption Program - Verification) was developed to simulate all energy loads for any number of buildings. The program computes simulated daily, monthly, and yearly energy consumption which can be compared with actual meter readings for the same time period. Such comparison can lead to validation of the model under a variety of conditions, which allows it to be used to predict future energy saving due to energy conservation measures. Predicted energy saving can then be compared with actual saving to verify the effectiveness of those energy conservation changes. This verification procedure is planned to be an important advancement in the Deep Space Network Energy Project, which seeks to reduce energy cost and consumption at all DSN Deep Space Stations.

  18. A global optimization method synthesizing heat transfer and thermodynamics for the power generation system with Brayton cycle

    NASA Astrophysics Data System (ADS)

    Fu, Rong-Huan; Zhang, Xing

    2016-09-01

    Supercritical carbon dioxide operated in a Brayton cycle offers a numerous of potential advantages for a power generation system, and a lot of thermodynamics analyses have been conducted to increase its efficiency. Because there are a lot of heat-absorbing and heat-lossing subprocesses in a practical thermodynamic cycle and they are implemented by heat exchangers, it will increase the gross efficiency of the whole power generation system to optimize the system combining thermodynamics and heat transfer theory. This paper analyzes the influence of the performance of heat exchangers on the actual efficiency of an ideal Brayton cycle with a simple configuration, and proposes a new method to optimize the power generation system, which aims at the minimum energy consumption. Although the method is operated only for the ideal working fluid in this paper, its merits compared to that only with thermodynamic analysis are fully shown.

  19. Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely-Low Energy Consumption Electronics

    DTIC Science & Technology

    2015-12-17

    single-electron transistor, tunnel transistor, energy- efficient electronics 16. SECURITY CLASSIFICATION OF: a. REPORT u b. ABSTRACT U c. THIS PAGE...Publications/Patents p.39 III.B. Presentations p.39 . 9 . I. Introduction and Background Excessive heat dissipation (or power consumption) of modem...of heat dissipation/power consumption of smart phones, tablets, and laptops is such that it prohibits a continuous and prolonged operation of these

  20. The "Green Lab": Power Consumption by Commercial Light Bulbs

    ERIC Educational Resources Information Center

    Einsporn, James A.; Zhou, Andrew F.

    2011-01-01

    Going "green" is a slogan that is very contemporary, both with industry and in the political arena. Choosing more energy-efficient devices is one way homeowners can "go green." A simple method is to change home lighting from hot incandescent bulbs to compact fluorescent lights (CFLs). But do they really save energy? How do their illuminations…

  1. Using abstract language signals power.

    PubMed

    Wakslak, Cheryl J; Smith, Pamela K; Han, Albert

    2014-07-01

    Power can be gained through appearances: People who exhibit behavioral signals of power are often treated in a way that allows them to actually achieve such power (Ridgeway, Berger, & Smith, 1985; Smith & Galinsky, 2010). In the current article, we examine power signals within interpersonal communication, exploring whether use of concrete versus abstract language is seen as a signal of power. Because power activates abstraction (e.g., Smith & Trope, 2006), perceivers may expect higher power individuals to speak more abstractly and therefore will infer that speakers who use more abstract language have a higher degree of power. Across a variety of contexts and conversational subjects in 7 experiments, participants perceived respondents as more powerful when they used more abstract language (vs. more concrete language). Abstract language use appears to affect perceived power because it seems to reflect both a willingness to judge and a general style of abstract thinking.

  2. Power Management System Design for Solar-Powered UAS

    DTIC Science & Technology

    2015-12-01

    extreme aerodynamic efficiency in order to minimize the power required to maintain flight, and a recognition that every sub- system in this system of... systems into a lightweight module for particular mission sets. 14. SUBJECT TERMS solar efficiency , maximum power point tracker, solar array, unmanned...requirements. This ultimately contributes to the overall energy efficiency of the system . 3. Power Consumption Considering this research topic, perhaps

  3. USE OF COAL DRYING TO REDUCE WATER CONSUMED IN PULVERIZED COAL POWER PLANTS

    SciTech Connect

    Edward K. Levy; Nenad Sarunac; Harun Bilirgen; Hugo Caram

    2006-03-01

    U.S. low rank coals contain relatively large amounts of moisture, with the moisture content of subbituminous coals typically ranging from 15 to 30 percent and that for lignites from 25 and 40 percent. High fuel moisture has several adverse impacts on the operation of a pulverized coal generating unit, for it can result in fuel handling problems and it affects heat rate, stack emissions and maintenance costs. Theoretical analyses and coal test burns performed at a lignite fired power plant show that by reducing the fuel moisture, it is possible to improve boiler performance and unit heat rate, reduce emissions and reduce water consumption by the evaporative cooling tower. The economic viability of the approach and the actual impact of the drying system on water consumption, unit heat rate and stack emissions will depend critically on the design and operating conditions of the drying system. The present project evaluated the low temperature drying of high moisture coals using power plant waste heat to provide the energy required for drying. Coal drying studies were performed in a laboratory scale fluidized bed dryer to gather data and develop models on drying kinetics. In addition, analyses were carried out to determine the relative costs and performance impacts (in terms of heat rate, cooling tower water consumption and emissions) of drying along with the development of optimized drying system designs and recommended operating conditions.

  4. Power without nukes

    SciTech Connect

    Not Available

    1988-03-01

    Nuclear power is good at producing large quantities of electricity. Barring a big change in the world's pattern of energy consumption, that is the kind of energy that will be most in demand if economic growth is to remain rapid. What are the options if we abandon nuclear power. By the year 2000, even on conservative estimates of economic growth, OECD countries would be generating 25% of their electricity from nuclear power. Total nuclear capacity would be about 400,000 MW. That is the size of the gap that would have to be filled. The rate of economic growth and the progress of conservation both depend partly on the price of energy - and the price of energy depends on the speed and extent of any nuclear phase-out. But if nuclear power stations were shut overnight, power cuts would be impossible to avoid in several countries, and electricity-generating costs would osar. Only oil, gas, and coal could fill the gap. Consumption of either oil or coal would have to rise by 10%. Replacing nuclear power over say 20 years would be less disruptive, but still costly. Some new sources - oil from tar sands and shale, more hydroelectric power, perhaps fuel cells - would fill the gap. But they would not prevent energy prices from rising to at least double their present levels in real terms. Indeed, they would require such a rise, because without it they would make no commercial sense.

  5. Wireless Power Transfer

    SciTech Connect

    2013-07-22

    Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the

  6. Wireless Power Transfer

    ScienceCinema

    None

    2016-07-12

    Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the

  7. Using LEDs to reduce energy consumption

    NASA Astrophysics Data System (ADS)

    Eweni, Chukwuebuka E.

    The most popularly used light bulb in homes is the incandescent. It is also the least energy efficient. The filament in the bulb is so thin that it causes resistance in the electricity, which in turn causes the electricity's energy to form heat. This causes the incandescent to waste a lot of energy forming heat rather than forming the light. It uses 15 lumens per watt of input power. A recorded MATLAB demonstration showcased LED versatility and how it can be used by an Arduino UNO board. The objective of this thesis is to showcase how LEDs can reduce energy consumption through the use of an Arduino UNO board and MATLAB and to discuss the applications of LED. LED will be the future of lighting homes and will eventually completely incandescent bulbs when companies begin to make the necessary improvements to the LED.

  8. Oxygen consumption estimation with combined color doppler ultrasound and photoacoustic microscopy: a phantom study

    NASA Astrophysics Data System (ADS)

    Jiang, Yan; Harrison, Tyler; Forbrich, Alex; Zemp, Roger J.

    2011-03-01

    The metabolic rate of oxygen consumption (MRO2) quantifies tissue metabolism, which is important for diagnosis of many diseases. For a single vessel model, the MRO2 can be estimated in terms of the mean flow velocity, vessel crosssectional area, total concentration of hemoglobin (CHB), and the difference between the oxygen saturation (sO2) of blood flowing into and out of the tissue region. In this work, we would like to show the feasibility to estimate MRO2 with our combined photoacoustic and high-frequency ultrasound imaging system. This system uses a swept-scan 25-MHz ultrasound transducer with confocal dark-field laser illumination optics. A pulse-sequencer enables ultrasonic and laser pulses to be interlaced so that photoacoustic and Doppler ultrasound images are co-registered. Since the mean flow velocity can be measured by color Doppler ultrasound, the vessel cross-sectional area can be measured by power Doppler or photoacoustic imaging, and multi-wavelength photoacoustic methods can be used to estimate sO2 and CHB, all of these parameters necessary for MRO2 estimation can be provided by our system. Experiments have been performed on flow phantoms to generate co-registered color Doppler and photoacoustic images. To verify the sO2 estimation, two ink samples (red and blue) were mixed in various concentration ratios to mimic different levels of sO2, and the result shows a good match between the calculated concentration ratios and actual values.

  9. Impacts of static pressure set level on HVAC energy consumption and indoor conditions

    SciTech Connect

    Liu, M.; Zhu, Y.; Claridge, D.E.; White, E.

    1997-12-31

    Air static pressure must be maintained at a certain level leaving the air-handling unit (AHU) to force a suitable amount of air through the terminal boxes. However, an excessive static pressure level is often used due to (1) lack of a control device in a constant-volume (CV) system, (2) a malfunctioning control device in a variable-air-volume (VAV) system, and (3) fear of failure to maintain room temperature. High static pressure often develops excessive damper leakage in older mixing boxes. This results in an appropriate mixing of hot and cold air for dual-duct systems, excessive reheat in single-duct systems, and an excessive amount of air entering the space. Consequently, the actual fan power and heating and cooling energy consumption all become significantly higher than the design values. Even worse, the system may not be able to maintain room conditions due to unwanted simultaneous heating and cooling and may be noisy due to the excessive static pressure. This paper proposed to control the hot duct pressure and the variable-frequency drives (VFDs) to control the fan static, i.e., the cold duct pressure for dual-duct air-handling units. Both a theoretical analysis and results from a case study are presented in this paper.

  10. FRACTIONAL CRYSTALLIZATION FLOWSHEET TESTS WITH ACTUAL TANK WASTE

    SciTech Connect

    HERTING, D.L.

    2007-04-13

    Laboratory-scale flowsheet tests of the fractional crystallization process were conducted with actual tank waste samples in a hot cell at the 2224 Laboratory. The process is designed to separate medium-curie liquid waste into a low-curie stream for feeding to supplemental treatment and a high-curie stream for double-shell tank storage. Separations criteria (for Cesium-137 sulfate and sodium) were exceeded in all three of the flowsheet tests that were performed.

  11. FRACTIONAL CRYSTALLIZATION FLOWSHEET TESTS WITH ACTUAL TANK WASTE

    SciTech Connect

    HERTING, D.L.

    2006-10-18

    Laboratory-scale flowsheet tests of the fractional crystallization process were conducted with actual tank waste samples in a hot cell at the 222-S Laboratory. The process is designed to separate medium-curie liquid waste into a low-curie stream for feeding to supplemental treatment and a high-curie stream for double-shell tank storage. Separations criteria (for Cs-137 sulfate, and sodium) were exceeded in all three of the flowsheet tests that were performed.

  12. Survey data on household electricity consumption and living status in Northwestern China

    PubMed Central

    Niu, Shuwen; Jia, Yanqin; Ye, Liqiong; Dai, Runqi; Li, Na

    2016-01-01

    Based on 1128 survey questionnaires, main information on urban and rural household electricity consumption was obtained. Original data included household income, the price of electricity, all kinds of electrical appliances, purchase price of main appliances, household size, electricity consumption, as well as power, daily use time of electrical appliances in this data article. These data fully reflected behavior, preferences and living pattern of sample households in electricity use and provided the basis for analyzing the relationship between household electricity consumption and the quality of life (“Does electricity consumption improve residential living status in less developed regions? An empirical analysis using the quantile regression approach” [1]). PMID:27115023

  13. Survey data on household electricity consumption and living status in Northwestern China.

    PubMed

    Niu, Shuwen; Jia, Yanqin; Ye, Liqiong; Dai, Runqi; Li, Na

    2016-06-01

    Based on 1128 survey questionnaires, main information on urban and rural household electricity consumption was obtained. Original data included household income, the price of electricity, all kinds of electrical appliances, purchase price of main appliances, household size, electricity consumption, as well as power, daily use time of electrical appliances in this data article. These data fully reflected behavior, preferences and living pattern of sample households in electricity use and provided the basis for analyzing the relationship between household electricity consumption and the quality of life ("Does electricity consumption improve residential living status in less developed regions? An empirical analysis using the quantile regression approach" [1]).

  14. The actual citation impact of European oncological research.

    PubMed

    López-Illescas, Carmen; de Moya-Anegón, Félix; Moed, Henk F

    2008-01-01

    This study provides an overview of the research performance of major European countries in the field Oncology, the most important journals in which they published their research articles, and the most important academic institutions publishing them. The analysis was based on Thomson Scientific's Web of Science (WoS) and calculated bibliometric indicators of publication activity and actual citation impact. Studying the time period 2000-2006, it gives an update of earlier studies, but at the same time it expands their methodologies, using a broader definition of the field, calculating indicators of actual citation impact, and analysing new and policy relevant aspects. Findings suggest that the emergence of Asian countries in the field Oncology has displaced European articles more strongly than articles from the USA; that oncologists who have published their articles in important, more general journals or in journals covering other specialties, rather than in their own specialist journals, have generated a relatively high actual citation impact; and that universities from Germany, and--to a lesser extent--those from Italy, the Netherlands, UK, and Sweden, dominate a ranking of European universities based on number of articles in oncology. The outcomes illustrate that different bibliometric methodologies may lead to different outcomes, and that outcomes should be interpreted with care.

  15. Food consumption trends and drivers

    PubMed Central

    Kearney, John

    2010-01-01

    A picture of food consumption (availability) trends and projections to 2050, both globally and for different regions of the world, along with the drivers largely responsible for these observed consumption trends are the subject of this review. Throughout the world, major shifts in dietary patterns are occurring, even in the consumption of basic staples towards more diversified diets. Accompanying these changes in food consumption at a global and regional level have been considerable health consequences. Populations in those countries undergoing rapid transition are experiencing nutritional transition. The diverse nature of this transition may be the result of differences in socio-demographic factors and other consumer characteristics. Among other factors including urbanization and food industry marketing, the policies of trade liberalization over the past two decades have implications for health by virtue of being a factor in facilitating the ‘nutrition transition’ that is associated with rising rates of obesity and chronic diseases such as cardiovascular disease and cancer. Future food policies must consider both agricultural and health sectors, thereby enabling the development of coherent and sustainable policies that will ultimately benefit agriculture, human health and the environment. PMID:20713385

  16. Energy Consumption vs. Energy Requirement

    ERIC Educational Resources Information Center

    Fan, L. T.; Zhang, Tengyan; Schlup, John R.

    2006-01-01

    Energy is necessary for any phenomenon to occur or any process to proceed. Nevertheless, energy is never consumed; instead, it is conserved. What is consumed is available energy, or exergy, accompanied by an increase in entropy. Obviously, the terminology, "energy consumption" is indeed a misnomer although it is ubiquitous in the…

  17. Sales promotions and food consumption.

    PubMed

    Hawkes, Corinna

    2009-06-01

    Sales promotions are widely used to market food to adults, children, and youth. Yet, in contrast to advertising, practically no attention has been paid to their impacts on dietary behaviors, or to how they may be used more effectively to promote healthy eating. This review explores the available literature on the subject. The objective is to identify if and what literature exists, examine the nature of this literature, and analyze what can be learned from it about the effects of sales promotions on food consumption. The review finds that while sales promotions lead to significant sales increases over the short-term, this does not necessarily lead to changes in food-consumption patterns. Nevertheless, there is evidence from econometric modeling studies indicating that sales promotions can influence consumption patterns by influencing the purchasing choices of consumers and encouraging them to eat more. These effects depend on the characteristics of the food product, sales promotion, and consumer. The complexity of the effects means that sales promotions aiming to encourage consumption of nutritious foods need to be carefully designed. These conclusions are based on studies that use mainly sales data as a proxy for dietary intake. The nutrition (and economics) research communities should add to this existing body of research to provide evidence on the impact of sales promotions on dietary intake and related behaviors. This would help support the development of a sales promotion environment conducive to healthy eating.

  18. Caffeine Consumption by College Undergraduates.

    ERIC Educational Resources Information Center

    Loke, Wing Hong

    1988-01-01

    Surveyed 542 undergraduates concerning their caffeine consumption. Found that subjects consumed less caffeine than average caffeine-drinking population. Coffee was main beverage used. Subjects reported drinking more caffeine when preparing for examinations. Suggests that caffeine may have some beneficial effects on learning. (Author/NB)

  19. Shifting Preferences in Pornography Consumption.

    ERIC Educational Resources Information Center

    Zillmann, Dolf; Bryant, Jennings

    1986-01-01

    Concludes that subjects with considerable prior exposure to common, nonviolent pornography preferred to watch uncommon pornography. Male nonstudents preferred it almost exclusively, as did male students to a lesser extent. Females also exhibited this consumption preference, though it was far less pronounced, especially in female students. (JD)

  20. Gender Commitment and Alcohol Consumption.

    ERIC Educational Resources Information Center

    Rabow, Jerome; And Others

    1992-01-01

    Categorized 179 college students as masculine, feminine, androgynous, or undifferentiated. Found gender orientations related to overall quantity-frequency index of alcohol consumption and beverage type. Androgynous respondents consumed less total alcohol than other groups; undifferentiated subjects drank more than feminine or androgynous subjects;…

  1. Global implications of standby power use

    SciTech Connect

    Lebot, Benoit; Meier, Alan; Anglade, Alain

    2000-05-01

    Separate studies indicate that standby power is responsible for 20-60 W per home in developed countries. Standby power is responsible for about 2% of OECD countries total electricity consumption and the related power generation generates almost 1% of their carbon emissions. Replacement of existing appliances with those appliances having the lowest standby would reduce total standby power consumption by over 70%. The resulting reductions in carbon emissions would meet over 3% of OECD's total Kyoto commitments. Other strategies may cut more carbon emissions, but standby power is unique in that the reductions are best accomplished through international collaboration and whose costs and large benefits would be spread over all countries.

  2. Electric power monthly

    SciTech Connect

    1995-08-01

    The Energy Information Administration (EIA) prepares the Electric Power Monthly (EPM) for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. This publication provides monthly statistics for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions. The EIA publishes statistics in the EPM on net generation by energy source, consumption, stocks, quantity, quality, and cost of fossil fuels; and capability of new generating units by company and plant. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead.

  3. Electric power monthly

    SciTech Connect

    Smith, Sandra R.; Johnson, Melvin; McClevey, Kenneth; Calopedis, Stephen; Bolden, Deborah

    1992-05-01

    The Electric Power Monthly is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the national, Census division, and State levels for net generation, fuel consumption, fuel stocks, quantity and quality of fuel, cost of fuel, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fuel are also displayed for the North American Electric Reliability Council (NERC) regions. Additionally, statistics by company and plant are published in the EPM on capability of new plants, new generation, fuel consumption, fuel stocks, quantity and quality of fuel, and cost of fuel.

  4. The growth pattern and fuel life cycle analysis of the electricity consumption of Hong Kong.

    PubMed

    To, W M; Lai, T M; Lo, W C; Lam, K H; Chung, W L

    2012-06-01

    As the consumption of electricity increases, air pollutants from power generation increase. In metropolitans such as Hong Kong and other Asian cities, the surge of electricity consumption has been phenomenal over the past decades. This paper presents a historical review about electricity consumption, population, and change in economic structure in Hong Kong. It is hypothesized that the growth of electricity consumption and change in gross domestic product can be modeled by 4-parameter logistic functions. The accuracy of the functions was assessed by Pearson's correlation coefficient, mean absolute percent error, and root mean squared percent error. The paper also applies the life cycle approach to determine carbon dioxide, methane, nitrous oxide, sulfur dioxide, and nitrogen oxide emissions for the electricity consumption of Hong Kong. Monte Carlo simulations were applied to determine the confidence intervals of pollutant emissions. The implications of importing more nuclear power are discussed.

  5. Minimizing water consumption when producing hydropower

    NASA Astrophysics Data System (ADS)

    Leon, A. S.

    2015-12-01

    In 2007, hydropower accounted for only 16% of the world electricity production, with other renewable sources totaling 3%. Thus, it is not surprising that when alternatives are evaluated for new energy developments, there is strong impulse for fossil fuel or nuclear energy as opposed to renewable sources. However, as hydropower schemes are often part of a multipurpose water resources development project, they can often help to finance other components of the project. In addition, hydropower systems and their associated dams and reservoirs provide human well-being benefits, such as flood control and irrigation, and societal benefits such as increased recreational activities and improved navigation. Furthermore, hydropower due to its associated reservoir storage, can provide flexibility and reliability for energy production in integrated energy systems. The storage capability of hydropower systems act as a regulating mechanism by which other intermittent and variable renewable energy sources (wind, wave, solar) can play a larger role in providing electricity of commercial quality. Minimizing water consumption for producing hydropower is critical given that overuse of water for energy production may result in a shortage of water for other purposes such as irrigation, navigation or fish passage. This paper presents a dimensional analysis for finding optimal flow discharge and optimal penstock diameter when designing impulse and reaction water turbines for hydropower systems. The objective of this analysis is to provide general insights for minimizing water consumption when producing hydropower. This analysis is based on the geometric and hydraulic characteristics of the penstock, the total hydraulic head and the desired power production. As part of this analysis, various dimensionless relationships between power production, flow discharge and head losses were derived. These relationships were used to withdraw general insights on determining optimal flow discharge and

  6. Exposure to soda commercials affects sugar-sweetened soda consumption in young women. An observational experimental study.

    PubMed

    Koordeman, Renske; Anschutz, Doeschka J; van Baaren, Rick B; Engels, Rutger C M E

    2010-06-01

    The present study examines the direct effects of television commercials advertising soda on actual sugar-sweetened soda consumption among young women. An experimental-observational study design was used, in which 51 female students (ages 18-29) were exposed to a 35-min movie clip, interrupted by two commercial breaks consisting of soda or water commercials. Their actual soda consumption while watching the movie clip was examined. An analysis of variance was used to examine the effects of commercial condition on soda consumption. Thirst and first glass consumed before the first commercial break were added as covariates in the analyses. Results indicated that participants assigned to the condition with soda commercials consumed 1.3 ounces more soda than participants in the water commercial condition. Exposure to soda commercials while watching a movie can have a strong influence on increasing sugar-sweetened soda consumption in young women.

  7. [Food in the contemporary context: consumption, political action and sustainability].

    PubMed

    Portilho, Fátima; Castañeda, Marcelo; de Castro, Inês Rugani Ribeiro

    2011-01-01

    The interdisciplinary field of reflections on food as politics goes through a process of expansion and overflow to the private sphere, and routine daily food consumption. This process seems to be a reflection of transformations in the global agrifood markets, the wide publicity and awareness of food hazards and the politicization of consumption. To the extent that individuals are to assume responsibility for the environmental and social consequences of their everyday choices, the specificity of political power in contemporary societies goes beyond the institutional level (food security and nutrition, social inequalities in access to food, agricultural policies and regulations advertising of food) to meet the private sphere. This paper shows, initially, some of the recent debates about the process of politicization of consumption and then explores a theoretical reflection on the ethical, political and ideological habits that relate to food consumption, including the locations and ways of acquiring and food preparation, the values of environmental preservation, solidarity with local producers and reflexive caution against food risks. Finally, points to a research agenda capable of capturing the processes of politicization of food and consumer practices in the field of political power.

  8. Wireless network interface energy consumption implications of popular streaming formats

    NASA Astrophysics Data System (ADS)

    Chandra, Surendar

    2001-12-01

    With the proliferation of mobile streaming multimedia, available battery capacity constrains the end-user experience. Since streaming applications tend to be long running, wireless network interface card's (WNIC) energy consumption is particularly an acute problem. In this work, we explore the WNIC energy consumption implications of popular multimedia streaming formats from Microsoft (Windows media), Real (Real media) and Apple (Quick Time). We investigate the energy consumption under varying stream bandwidth and network loss rates. We also explore history-based client-side strategies to reduce the energy consumed by transitioning the WNICs to a lower power consuming sleep state. We show that Microsoft media tends to transmit packets at regular intervals; streams optimized for 28.8 Kbps can save over 80% in energy consumption with 2% data loss. A high bandwidth stream (768 Kbps) can still save 57% in energy consumption with less than 0.3% data loss. For high bandwidth streams, Microsoft media exploits network-level packet fragmentation, which can lead to excessive packet loss (and wasted energy) in a lossy network. Real stream packets tend to be sent closer to each other, especially at higher bandwidths. Quicktime packets sometimes arrive in quick succession; most likely an application level fragmentation mechanism. Such packets are harder to predict at the network level without understanding the packet semantics.

  9. Food production and consumption near the Savannah River Site

    SciTech Connect

    Hamby, D.M.

    1991-12-31

    Routine operations at the Savannah River Site (SRS) result in the release of radionuclides to the atmosphere and to the Savannah River. The resulting radiological doses to the off-site maximum individual and the 80-km population are estimated on a yearly basis. These estimates are generated using dose models prescribed in the NRC Reg. Guide 1.109 for the commercial nuclear power industry. A study of land and water usage characteristics in the region of the Savannah River Site has been conducted to determine site-specific values of the NRC dose model parameters. The study`s scope included local characteristics of meat, milk, vegetable production; Savannah River recreational activities and fish harvests; meat, milk, vegetable, and seafood consumption rates; and Savannah River drinking-water populations. Average and maximum consumption rates of beef, milk, vegetables, and fish have been determined for individuals residing in the southern United States. The study suggest that many of the consumption rates provided by the NRC may not be appropriate for residents of the South. Average consumption rates are slightly higher than the defaults provided by the NRC. Maximum consumption rates, however, are typically lower than NRC values. Agricultural productivity in the SRS region was found to be quite different than NRC recommendations. Off-site doses have been predicted using both NRC and SRS parameter values to demonstrate the significance of site-specific data.

  10. Food production and consumption near the Savannah River Site

    SciTech Connect

    Hamby, D.M.

    1991-01-01

    Routine operations at the Savannah River Site (SRS) result in the release of radionuclides to the atmosphere and to the Savannah River. The resulting radiological doses to the off-site maximum individual and the 80-km population are estimated on a yearly basis. These estimates are generated using dose models prescribed in the NRC Reg. Guide 1.109 for the commercial nuclear power industry. A study of land and water usage characteristics in the region of the Savannah River Site has been conducted to determine site-specific values of the NRC dose model parameters. The study's scope included local characteristics of meat, milk, vegetable production; Savannah River recreational activities and fish harvests; meat, milk, vegetable, and seafood consumption rates; and Savannah River drinking-water populations. Average and maximum consumption rates of beef, milk, vegetables, and fish have been determined for individuals residing in the southern United States. The study suggest that many of the consumption rates provided by the NRC may not be appropriate for residents of the South. Average consumption rates are slightly higher than the defaults provided by the NRC. Maximum consumption rates, however, are typically lower than NRC values. Agricultural productivity in the SRS region was found to be quite different than NRC recommendations. Off-site doses have been predicted using both NRC and SRS parameter values to demonstrate the significance of site-specific data.

  11. Actual drawing of histological images improves knowledge retention.

    PubMed

    Balemans, Monique C M; Kooloos, Jan G M; Donders, A Rogier T; Van der Zee, Catharina E E M

    2016-01-01

    Medical students have to process a large amount of information during the first years of their study, which has to be retained over long periods of nonuse. Therefore, it would be beneficial when knowledge is gained in a way that promotes long-term retention. Paper-and-pencil drawings for the uptake of form-function relationships of basic tissues has been a teaching tool for a long time, but now seems to be redundant with virtual microscopy on computer-screens and printers everywhere. Several studies claimed that, apart from learning from pictures, actual drawing of images significantly improved knowledge retention. However, these studies applied only immediate post-tests. We investigated the effects of actual drawing of histological images, using randomized cross-over design and different retention periods. The first part of the study concerned esophageal and tracheal epithelium, with 384 medical and biomedical sciences students randomly assigned to either the drawing or the nondrawing group. For the second part of the study, concerning heart muscle cells, students from the previous drawing group were now assigned to the nondrawing group and vice versa. One, four, and six weeks after the experimental intervention, the students were given a free recall test and a questionnaire or drawing exercise, to determine the amount of knowledge retention. The data from this study showed that knowledge retention was significantly improved in the drawing groups compared with the nondrawing groups, even after four or six weeks. This suggests that actual drawing of histological images can be used as a tool to improve long-term knowledge retention.

  12. Dieting: really harmful, merely ineffective or actually helpful?

    PubMed

    Lowe, Michael R; Timko, C Alix

    2004-08-01

    Dieting has developed a negative reputation among many researchers and health care professionals. However, 'dieting' can refer to a variety of behavioural patterns that are associated with different effects on eating and body weight. The wisdom of dieting depends on what kind of dieting is involved, who is doing it, and why. Thus, depending on what one means by the term, dieting can be quite harmful, merely ineffective or actually beneficial. The present paper considers examples of all three. In particular, we argue that judgements about the desirability of dieting should consider the likely consequences to particular individuals of engaging in, or not engaging in, dieting behaviour.

  13. The Frictional Force with Respect to the Actual Contact Surface

    NASA Technical Reports Server (NTRS)

    Holm, Ragnar

    1944-01-01

    Hardy's statement that the frictional force is largely adhesion, and to a lesser extent, deformation energy is proved by a simple experiment. The actual contact surface of sliding contacts and hence the friction per unit of contact surface was determined in several cases. It was found for contacts in normal atmosphere to be about one-third t-one-half as high as the macroscopic tearing strength of the softest contact link, while contacts annealed in vacuum and then tested, disclosed frictional forces which are greater than the macroscopic strength.

  14. Evaluation Of A Residential Retrofit Program In Omaha Nebraska: A Comparison Of Actual Energy Savings With Audit Predictions Using Quantitative Analysis

    NASA Astrophysics Data System (ADS)

    Cory, Bradley S.

    The reEnergize Program conducted 957 energy upgrades in Omaha Nebraska from July 2010 to September 30th 2013, through a government grant within the Better Buildings Neighborhood Program. Projected program savings were provided upon program completion but it was unknown how effective the program was at actually reducing energy consumption in the homes that were upgraded. The following research report uses a PRISM analysis to remove the effect of weather and compare the actual pre and post utility usage rates to determine the actual effectiveness of the program. The housing characteristics, and individual energy upgrades were analyzed to see if any patterns or trends could be identified between consumption savings and housing type and specific upgrade measure. The results of the study showed that the program did induce savings but by much less than the engineering estimates predicted. It is likely that housing characteristics and upgrade measures play a role in inducing consumption savings but homeowner behavior is a stronger factor that influences savings.

  15. Manufacturing consumption of energy 1994

    SciTech Connect

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  16. Research of Tianjin's future water consumption

    NASA Astrophysics Data System (ADS)

    Shen, Yinhe

    2017-03-01

    Water shortage has been a great issue in nowadays. Thus, the prediction of future water consumption situation in an area appears especially important. The water demand includes industrial water, agricultural water and domestic water. The paper take Tianjin, China as the study object to predict the Tianjin's water consumption in future 15 years. To get more accurate result, we use Grey Forecasting Model, to get the correlation degree between water consumption, domestic water consumption, industrial water consumption and agricultural water consumption, we successfully figure out the water demand in 2030 will be 2.47 billion cubic meters.

  17. Investigating Data Motion Power Trends to Enable Power-Efficient OpenSHMEM Implementations

    SciTech Connect

    Mintz, Tiffany M; D'Azevedo, Eduardo F.; Gorentla Venkata, Manjunath; Hsu, Chung-Hsing

    2016-01-01

    As we continue to develop extreme-scale systems, it is becoming increasingly important to be mindful and more in control of power consumed by these systems. With high performance requirements being more constrained by power and data movement quickly becoming the critical concern for both power and performance, now is an opportune time for OpenSHMEM implementations to address the need for more power-efficient data movement. In order to enable power efficient OpenSHMEM implementations, we have formulated power trend studies that emphasize power consumption for one-sided communications and the disparities in power consumption across multiple implementations. In this paper, we present power trend analysis, generate targeted hypotheses for increasing power efficiency with OpenSHMEM, and discuss prospective research for power efficient OpenSHMEM implementations.

  18. Household vehicles energy consumption 1994

    SciTech Connect

    1997-08-01

    Household Vehicles Energy Consumption 1994 reports on the results of the 1994 Residential Transportation Energy Consumption Survey (RTECS). The RTECS is a national sample survey that has been conducted every 3 years since 1985. For the 1994 survey, more than 3,000 households that own or use some 6,000 vehicles provided information to describe vehicle stock, vehicle-miles traveled, energy end-use consumption, and energy expenditures for personal vehicles. The survey results represent the characteristics of the 84.9 million households that used or had access to vehicles in 1994 nationwide. (An additional 12 million households neither owned or had access to vehicles during the survey year.) To be included in then RTECS survey, vehicles must be either owned or used by household members on a regular basis for personal transportation, or owned by a company rather than a household, but kept at home, regularly available for the use of household members. Most vehicles included in the RTECS are classified as {open_quotes}light-duty vehicles{close_quotes} (weighing less than 8,500 pounds). However, the RTECS also includes a very small number of {open_quotes}other{close_quotes} vehicles, such as motor homes and larger trucks that are available for personal use.

  19. Municipal water consumption forecast accuracy

    NASA Astrophysics Data System (ADS)

    Fullerton, Thomas M.; Molina, Angel L.

    2010-06-01

    Municipal water consumption planning is an active area of research because of infrastructure construction and maintenance costs, supply constraints, and water quality assurance. In spite of that, relatively few water forecast accuracy assessments have been completed to date, although some internal documentation may exist as part of the proprietary "grey literature." This study utilizes a data set of previously published municipal consumption forecasts to partially fill that gap in the empirical water economics literature. Previously published municipal water econometric forecasts for three public utilities are examined for predictive accuracy against two random walk benchmarks commonly used in regional analyses. Descriptive metrics used to quantify forecast accuracy include root-mean-square error and Theil inequality statistics. Formal statistical assessments are completed using four-pronged error differential regression F tests. Similar to studies for other metropolitan econometric forecasts in areas with similar demographic and labor market characteristics, model predictive performances for the municipal water aggregates in this effort are mixed for each of the municipalities included in the sample. Given the competitiveness of the benchmarks, analysts should employ care when utilizing econometric forecasts of municipal water consumption for planning purposes, comparing them to recent historical observations and trends to insure reliability. Comparative results using data from other markets, including regions facing differing labor and demographic conditions, would also be helpful.

  20. Health benefits of nut consumption.

    PubMed

    Ros, Emilio

    2010-07-01

    Nuts (tree nuts and peanuts) are nutrient dense foods with complex matrices rich in unsaturated fatty and other bioactive compounds: high-quality vegetable protein, fiber, minerals, tocopherols, phytosterols, and phenolic compounds. By virtue of their unique composition, nuts are likely to beneficially impact health outcomes. Epidemiologic studies have associated nut consumption with a reduced incidence of coronary heart disease and gallstones in both genders and diabetes in women. Limited evidence also suggests beneficial effects on hypertension, cancer, and inflammation. Interventional studies consistently show that nut intake has a cholesterol-lowering effect, even in the context of healthy diets, and there is emerging evidence of beneficial effects on oxidative stress, inflammation, and vascular reactivity. Blood pressure, visceral adiposity and the metabolic syndrome also appear to be positively influenced by nut consumption. Thus it is clear that nuts have a beneficial impact on many cardiovascular risk factors. Contrary to expectations, epidemiologic studies and clinical trials suggest that regular nut consumption is unlikely to contribute to obesity and may even help in weight loss. Safety concerns are limited to the infrequent occurrence of nut allergy in children. In conclusion, nuts are nutrient rich foods with wide-ranging cardiovascular and metabolic benefits, which can be readily incorporated into healthy diets.

  1. Alcohol consumption and body weight.

    PubMed

    French, Michael T; Norton, Edward C; Fang, Hai; Maclean, Johanna Catherine

    2010-07-01

    The number of Americans who are overweight or obese has reached epidemic proportions. Elevated weight is associated with health problems and increased medical expenditures. This paper analyzes Waves 1 and 2 of the National Epidemiological Survey of Alcohol and Related Conditions to investigate the role of alcohol consumption in weight gain. Alcohol is not only an addictive substance but also a high-calorie beverage that can interfere with metabolic function and cognitive processes. Because men and women differ in the type and amount of alcohol they consume, in the biological effects they experience as a result of alcohol consumption, and in the consequences they face as a result of obesity, we expect our results to differ by gender. We use first-difference models of body mass index (BMI) and alcohol consumption (frequency and intensity) to control for time-invariant unobservable factors that may influence changes in both alcohol use and weight status. Increasing frequency and intensity of alcohol use is associated with statistically significant yet quantitatively small weight gain for men but not for women. Moreover, the first-difference results are much smaller in magnitude and sometimes different in sign compared with the benchmark pooled cross-sectional estimates.

  2. Health Benefits of Nut Consumption

    PubMed Central

    Ros, Emilio

    2010-01-01

    Nuts (tree nuts and peanuts) are nutrient dense foods with complex matrices rich in unsaturated fatty and other bioactive compounds: high-quality vegetable protein, fiber, minerals, tocopherols, phytosterols, and phenolic compounds. By virtue of their unique composition, nuts are likely to beneficially impact health outcomes. Epidemiologic studies have associated nut consumption with a reduced incidence of coronary heart disease and gallstones in both genders and diabetes in women. Limited evidence also suggests beneficial effects on hypertension, cancer, and inflammation. Interventional studies consistently show that nut intake has a cholesterol-lowering effect, even in the context of healthy diets, and there is emerging evidence of beneficial effects on oxidative stress, inflammation, and vascular reactivity. Blood pressure, visceral adiposity and the metabolic syndrome also appear to be positively influenced by nut consumption. Thus it is clear that nuts have a beneficial impact on many cardiovascular risk factors. Contrary to expectations, epidemiologic studies and clinical trials suggest that regular nut consumption is unlikely to contribute to obesity and may even help in weight loss. Safety concerns are limited to the infrequent occurrence of nut allergy in children. In conclusion, nuts are nutrient rich foods with wide-ranging cardiovascular and metabolic benefits, which can be readily incorporated into healthy diets. PMID:22254047

  3. Energy sustainability: consumption, efficiency, and ...

    EPA Pesticide Factsheets

    One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consumption began exceeding planetary supply in 1977 and by 2030, global energy demand, population, and gross domestic product are projected to greatly increase over 1977 levels. With the aim of finding sustainable energy solutions, we present a simple yet rigorous procedure for assessing and counterbalancing the relationship between energy demand, environmental impact, population, GDP, and energy efficiency. Our analyses indicated that infeasible increases in energy efficiency (over 100 %) would be required by 2030 to return to 1977 environmental impact levels and annual reductions (2 and 3 %) in energy demand resulted in physical, yet impractical requirements; hence, a combination of policy and technology approaches is needed to tackle this critical challenge. This work emphasizes the difficulty in moving toward energy sustainability and helps to frame possible solutions useful for policy and management. Based on projected energy consumption, environmental impact, human population, gross domestic product (GDP), and energy efficiency, for this study, we explore the increase in energy-use efficiency and the decrease in energy use intensity required to achieve sustainable environmental impact le

  4. Caffeine consumption among medical students.

    PubMed

    Mino, Y; Yasuda, N; Fujimura, T; Ohara, H

    1990-12-01

    Recently, caffeine consumption in Japan is thought to have increased. Although caffeine had been considered to be harmless, there have been studies which suggests an association between caffeine and health and give rise to vigorous discussion. However, in Japan, there have been few epidemiological studies on caffeine consumption among a general population. A questionnaire survey was conducted among medical students and the results were as follows: 1) High dose users (estimated daily caffeine use is 250 mg or more) were observed in 15.2% and the proportion was higher in males than in females. 2) The respondents gave sleepiness, dry mouth and so on, as reasons for taking caffeine beverages, and gave, as the effects of caffeine, becoming clear-headed, shaking off sleepiness, and epigastric discomfort or pain. 3) A third of respondents have experienced taking caffeine tablets and ampules to shake off sleepiness and, in males, the more caffeine they had daily, the more who reported the experience. 4) Caffeine consumption has an association with alcohol use and smoking habit among males.

  5. Coffee Consumption and Cardiovascular Health.

    PubMed

    Chrysant, Steven G

    2015-09-01

    Coffee is the most widely consumed beverage worldwide and is only second to water drinking and is consumed by 83% of adults in the United States. The long-held controversy regarding the association of coffee consumption with an increased incidence of cardiovascular diseases (CVDs) and hypertension has been reversed by several recent prospective cohort studies and meta-analyses, which have demonstrated that coffee consumption is not associated with increased incidence of CVDs and hypertension and instead it could have a beneficial effect. To get a better understanding of the effects of coffee consumption on cardiovascular health, a Medline search of the English language literature was conducted from 2010 to early 2015 and 25 pertinent reports with information on the effects of coffee drinking, the incidence of CVDs, and hypertension and its mechanism of action were selected for inclusion in this commentary. These studies have shown either a neutral or beneficial effect of coffee on cardiovascular health. In conclusion, coffee is safe to drink by both normal subjects and by those with preexisting CVDs and hypertension.

  6. Beverage consumption and paediatric NAFLD.

    PubMed

    Mosca, Antonella; Della Corte, Claudia; Sartorelli, Maria Rita; Ferretti, Francesca; Nicita, Francesco; Vania, Andrea; Nobili, Valerio

    2016-12-01

    Non-alcoholic fatty liver disease (NAFLD) is the most common chronic liver disease in children and adolescents, due to the increased worldwide incidence of obesity among children. It is now clear enough that of diet high in carbohydrates and simple sugars are associated with hepatic steatosis and non-alcoholic steatohepatitis (NASH). Several studies have shown that an increased consumption of simple sugars is also positively associated with overweight and obesity, and related co-morbidities, such as type 2 diabetes, metabolic syndrome and NAFLD. It is difficult to define the role of the various components of soft drinks and energy drinks in the pathogenesis of NAFLD and its progression in NASH, but the major role is played by high calorie and high sugar consumption, mainly fructose. In addition, other components of these beverages (e.g. xanthine) seem to have an important role in the pathogenesis of metabolic disorders, crucial pathways involved in NAFLD/NASH. The drastic reduction in the consumption of energy drinks and soft drinks is an appropriate intervention for the prevention of obesity and NAFLD in young people.

  7. Effects of Radiation on Commercial Power Devices

    NASA Technical Reports Server (NTRS)

    Selva, Luis; Becker, Heidi; Chavez, Rosa; Scheick, Leif

    2006-01-01

    The effects of radiation on various commercial power devices are presented. The devices have proved to be very fragile to single event effects, with some of the devices actually succumbing to catastrophic SEE with protons.

  8. Green Power Partnership Resource Library: Solicitations

    EPA Pesticide Factsheets

    Green Power Partnership Resource Library includes documents meant to aid organizations and individuals in navigating the renewable energy procurement and renewable energy project development processes. It includes guidance documents, templates and actual e

  9. Electric Power: Decisions for the Future.

    ERIC Educational Resources Information Center

    Cardon, Phillip L.; Preston, John

    2003-01-01

    Reviews the past 25 years of electricity consumption in the United States and considers the implications for the near future. Discusses strategies for energy conservation and provides a student activity for measuring and conserving electric power. (Author/JOW)

  10. Actual ratio of triacylglycerol positional isomers in milk and cheese.

    PubMed

    Gotoh, Naohiro; Matsumoto, Yumiko; Nagai, Toshiharu; Mizobe, Hoyo; Yoshinaga, Kazuaki; Kojima, Koichi; Kuroda, Ikuma; Kitamura, Yohei; Shimizu, Takashi; Ishida, Hiroki; Wada, Shun

    2012-01-01

    Actual ratios of triacylglycerol (TAG) positional isomers in human, rat, and cow milk fat and cow, buffalo, goat, and sheep cheese fat were analyzed using HPLC-UV-atmospheric pressure chemical ionization-MS/MS system equipped with an octacosyl silylation column or polymeric ODS column. We substituted cheese fats for milk fats in parts of our study because milks from ruminants, with the exception of cows, are difficult to get in Japan. The actual ratio of β-PPC (the TAG consisting of two palmitic acids (P) and one capric acid (C), with the palmitic acid located at the β position) and β-PCP in human milk was different from those in ruminants, with more than half of the medium-chain fatty acids located at the β position even though other fats possessed it mainly at the α position. Palmitic acid was mainly located at the β position for human milk and rat milk; however, the location in ruminant cheese fat was mainly at the α position. The location of fatty acids is thought to be very important for infant nutrition. Particularly, the location of palmitic acid in case of human milk and of medium-chain fatty acids in case of ruminant milk was very characteristic and is considered to be very important to the fatty acids in milk fat.

  11. Actual and actuarial probabilities of competing risks: apples and lemons.

    PubMed

    Grunkemeier, Gary L; Jin, Ruyun; Eijkemans, Marinus J C; Takkenberg, Johanna J M

    2007-05-01

    The probability of a type of failure that is not inevitable, but can be precluded by other events such as death, is given by the cumulative incidence function. In cardiac research articles, it has become known as the actual probability, in contrast to the actuarial methods of estimation, usually implemented by the Kaplan-Meier (KM) estimate. Unlike cumulative incidence, KM attempts to predict what the latent failure probability would be if death were eliminated. To do this, the KM method assumes that the risk of dying and the risk of failure are independent. But this assumption is not true for many cardiac applications in which the risks of failure and death are negatively correlated (ie, patients with a higher risk of dying have a lower risk of failure, and patients with a lower risk of death have a higher risk of failure, which is a condition called informative censoring). Recent editorials in two cardiac journals have promoted the use of the KM method (actuarial estimate) for competing risk events (specifically for heart valve performance) and criticized the use of the cumulative incidence (actual) estimates. This report has two aims: to explain the difference between these two estimates and to show why the KM is generally not appropriate. In the process we will rely on alternative representations of the KM estimator (using redistribution to the right and inverse probability weighting) to explain the difference between the two estimates and to show how it may be possible to adjust KM to overcome the informative censoring.

  12. Experimental study on the regenerator under actual operating conditions

    NASA Astrophysics Data System (ADS)

    Nam, Kwanwoo; Jeong, Sangkwon

    2002-05-01

    An experimental apparatus was prepared to investigate thermal and hydrodynamic characteristics of the regenerator under its actual operating conditions. The apparatus included a compressor to pressurize and depressurize regenerator with various operating frequencies. Cold end of the regenerator was maintained around 100 K by means of liquid nitrogen container and heat exchanger. Instantaneous gas temperature and mass flow rate were measured at both ends of the regenerator during the whole pressure cycle. Pulsating pressure and pressure drop across the regenerator were also measured. The operating frequency of the pressure cycle was varied between 3 and 60 Hz, which are typical operating frequencies of Gifford-McMahon, pulse tube, and Stirling cryocoolers. First, friction factor for the wire screen mesh was directly determined from room temperature experiments. When the operating frequency was less than 9 Hz, the oscillating flow friction factor was nearly same as the steady flow friction factor for Reynolds number up to 100. For 60 Hz operations, the ratio of oscillating flow friction factor to steady flow one was increased as hydraulic Reynolds number became high. When the Reynolds number was 100, this ratio was about 1.6. Second, ineffectiveness of the regenerator was obtained when the cold-end was maintained around 100 K and the warm-end at 300 K to simulate the actual operating condition of the regenerator in cryocooler. Effect of the operating frequency on ineffectiveness of regenerator was discussed at low frequency range.

  13. What do tests of formal reasoning actually measure?

    NASA Astrophysics Data System (ADS)

    Lawson, Anton E.

    Tests of formal operational reasoning derived from Piagetian theory have been found to be effective predictors of academic achievement. Yet Piaget's theory regarding the underlying nature of formal operations and their employment in specific contexts has run into considerable empirical difficulty. The primary purpose of this study was to present the core of an alternative theory of the nature of advanced scientific reasoning. That theory, referred to as the multiple-hypothesis theory, argues that tests of formal operational reasoning actually measure the extent to which persons have acquired the ability to initiate reasoning with more than one specific antecedent condition, or if they are unable to imagine more than one antecedent condition, they are aware that more than one is possible; therefore conclusions that are drawn are tempered by this possibility. As a test of this multiple-hypothesis theory of advanced reasoning and the contrasting Piagetian theory of formal operations, a sample of 922 college students were first classified as concrete operational, transitional, or formal operational, based upon responses to standard Piagetian measures of formal operational reasoning. They were then administered seven logic tasks. Actual response patterns to the tasks were analyzed and found to be similar to predicted response patterns derived from the multiple-hypothesis theory and were different from those predicted by Piagetian theory. Therefore, support was obtained for the multiple-hypothesis theory. The terms intuitive and reflective were suggested to replace the terms concrete operational and formal operational to refer to persons at varying levels of intellectual development.

  14. Microbial minorities modulate methane consumption through niche partitioning.

    PubMed

    Bodelier, Paul L E; Meima-Franke, Marion; Hordijk, Cornelis A; Steenbergh, Anne K; Hefting, Mariet M; Bodrossy, Levente; von Bergen, Martin; Seifert, Jana

    2013-11-01

    Microbes catalyze all major geochemical cycles on earth. However, the role of microbial traits and community composition in biogeochemical cycles is still poorly understood mainly due to the inability to assess the community members that are actually performing biogeochemical conversions in complex environmental samples. Here we applied a polyphasic approach to assess the role of microbial community composition in modulating methane emission from a riparian floodplain. We show that the dynamics and intensity of methane consumption in riparian wetlands coincide with relative abundance and activity of specific subgroups of methane-oxidizing bacteria (MOB), which can be considered as a minor component of the microbial community in this ecosystem. Microarray-based community composition analyses demonstrated linear relationships of MOB diversity parameters and in vitro methane consumption. Incubations using intact cores in combination with stable isotope labeling of lipids and proteins corroborated the correlative evidence from in vitro incubations demonstrating γ-proteobacterial MOB subgroups to be responsible for methane oxidation. The results obtained within the riparian flooding gradient collectively demonstrate that niche partitioning of MOB within a community comprised of a very limited amount of active species modulates methane consumption and emission from this wetland. The implications of the results obtained for biodiversity-ecosystem functioning are discussed with special reference to the role of spatial and temporal heterogeneity and functional redundancy.

  15. State energy data report 1992: Consumption estimates

    SciTech Connect

    Not Available

    1994-05-01

    This is a report of energy consumption by state for the years 1960 to 1992. The report contains summaries of energy consumption for the US and by state, consumption by source, comparisons to other energy use reports, consumption by energy use sector, and describes the estimation methodologies used in the preparation of the report. Some years are not listed specifically although they are included in the summary of data.

  16. Consumption of sweet snacks and caries experience of primary school children.

    PubMed

    Kalsbeek, H; Verrips, G H

    1994-01-01

    With the aim of evaluating the relationship between consumption of sweet snacks (sugars) and caries prevalence, a secondary analysis was performed on data obtained in an epidemiological study of 5-, 8- and 11-year-old children, all participants of Regional Institutions for Youth Dentistry. The children's primary and permanent teeth were examined mainly by visual examination. Parents completed a questionnaire on the child's toothbrushing habits, use of fluoride tablets and fluoride toothpaste, consumption of sweet snacks, level of education of the mother as an indicator of the socio-economic status of the family and country of birth of the mother as an indicator of ethnicity. The various oral hygiene habits were combined into one variable. Firstly the crude relationship between consumption of sweet snacks and caries experience was evaluated, subsequently oral hygiene habits, socio-economic status and ethnicity were taken into account. Mean dmfs scores of 5- and 8-year-old children who consumed sweet snacks between meals more than 5 times a day (according to parents' reports) were significantly higher than mean dmfs scores of children with a lower reported sweet snack consumption. Multivariate analysis confirmed this result. Only 4.2% of the children were in the group with such a high sweet snack consumption. A number of parents probably underestimated the sweet snack consumption of their children. As the validity of the data on sweet snack consumption was questionable, the actual influence of this factor might be larger than the results of this study show.

  17. Investigating the added values of high frequency energy consumption data using data mining techniques

    NASA Astrophysics Data System (ADS)

    Ni, Ying; Engström, Christopher; Malyarenko, Anatoliy; Wallin, Fredrik

    2014-12-01

    In this paper we apply data-mining techniques to customer classification and clustering tasks on actual electricity consumption data from 350 Swedish households. For the classification task we classify households into different categories based on some statistical attributes of their energy consumption measurements. For the clustering task, we use average daily load diagrams to partition electricity-consuming households into distinct groups. The data contains electricity consumption measurements on each 10-minute time interval for each light source and electrical appliance. We perform the classification and clustering tasks using four variants of processed data sets corresponding to the 10-minute total electricity consumption aggregated from all electrical sources, the hourly total consumption aggregated over all 10-minute intervals during that clock hour, the total consumption over each four-hour intervals and finally the daily total consumption. The goal is to see if there are any differences in using data sets of various frequency levels. We present the comparison results and investigate the added value of the high-frequency measurements, for example 10-minute measurements, in terms of its influence on customer clustering and classification.

  18. Self-Actualization in a Marathon Growth Group: Do the Strong Get Stronger?

    ERIC Educational Resources Information Center

    Kimball, Ronald; Gelso, Charles J.

    1974-01-01

    This study examined the effects of a weekend marathon on the level of self-actualization of college students and the relationship between ego strength and extent of change in self-actualization. The group experience did increase self-actualization, but participants' initial level of ego strength was unrelated to changes in self-actualization.…

  19. Catalytic combustion of actual low and medium heating value gases

    NASA Technical Reports Server (NTRS)

    Bulzan, D. L.

    1982-01-01

    Catalytic combustion of both low and medium heating value gases using actual coal derived gases obtained from operating gasifiers was demonstrated. A fixed bed gasifier with a complete product gas cleanup system was operated in an air blown mode to produce low heating value gas. A fluidized bed gasifier with a water quench product gas cleanup system was operated in both an air enriched and an oxygen blown mode to produce low and medium, heating value gas. Noble metal catalytic reactors were evaluated in 12 cm flow diameter test rigs on both low and medium heating value gases. Combustion efficiencies greater than 99.5% were obtained with all coal derived gaseous fuels. The NOx emissions ranged from 0.2 to 4 g NO2 kg fuel.

  20. An evaluation of contractor projected and actual costs

    NASA Technical Reports Server (NTRS)

    Kwiatkowski, K. A.; Buffalano, C.

    1974-01-01

    GSFC contractors with cost-plus contracts provide cost estimates for each of the next four quarters on a quarterly basis. Actual expenditures over a two-year period were compared to the estimates, and the data were sorted in different ways to answer several questions and give quantification to observations, such as how much does the accuracy of estimates degrade as they are made further into the future? Are estimates made for small dollar amounts more accurate than for large dollar estimates? Other government agencies and private companies with cost-plus contracts may be interested in this analysis as potential methods of contract management for their organizations. It provides them with the different methods one organization is beginning to use to control costs.

  1. Motion fading is driven by perceived, not actual angular velocity.

    PubMed

    Kohler, P J; Caplovitz, G P; Hsieh, P-J; Sun, J; Tse, P U

    2010-06-01

    After prolonged viewing of a slowly drifting or rotating pattern under strict fixation, the pattern appears to slow down and then momentarily stop. Here we examine the relationship between such 'motion fading' and perceived angular velocity. Using several different dot patterns that generate emergent virtual contours, we demonstrate that whenever there is a difference in the perceived angular velocity of two patterns of dots that are in fact rotating at the same angular velocity, there is also a difference in the time to undergo motion fading for those two patterns. Conversely, whenever two patterns show no difference in perceived angular velocity, even if in fact rotating at different angular velocities, we find no difference in the time to undergo motion fading. Thus, motion fading is driven by the perceived rather than actual angular velocity of a rotating stimulus.

  2. Non-actual motion: phenomenological analysis and linguistic evidence.

    PubMed

    Blomberg, Johan; Zlatev, Jordan

    2015-09-01

    Sentences with motion verbs describing static situations have been seen as evidence that language and cognition are geared toward dynamism and change (Talmy in Toward a cognitive semantics, MIT Press, Cambridge, 2000; Langacker in Concept, image, and symbol: the cognitive basis of grammar, Mouton de Gruyter, Berlin and New York, 1990). Different concepts have been used in the literature, e.g., fictive motion, subjective motion and abstract motion to denote this. Based on phenomenological analysis, we reinterpret such concepts as reflecting different motivations for the use of such constructions (Blomberg and Zlatev in Phenom Cogn Sci 13(3):395-418, 2014). To highlight the multifaceted character of the phenomenon, we propose the concept non-actual motion (NAM), which we argue is more compatible with the situated cognition approach than explanations such as "mental simulation" (e.g., Matlock in Studies in linguistic motivation, Mouton de Gruyter, Berlin, 2004). We investigate the expression of NAM by means of a picture-based elicitation task with speakers of Swedish, French and Thai. Pictures represented figures that either afford human motion or not (±afford); crossed with this, the figure extended either across the picture from a third-person perspective (3 pp) or from a first-person perspective (1 pp). All picture types elicited NAM-sentences with the combination [+afford, 1 pp] producing most NAM-sentences in all three languages. NAM-descriptions also conformed to language-specific patterns for the expression of actual motion. We conclude that NAM shows interaction between pre-linguistic motivations and language-specific conventions.

  3. Thermoregulation during prolonged actual and laboratory-simulated bicycling.

    PubMed

    Brown, S L; Banister, E W

    1985-01-01

    Thermoregulatory and cardiorespiratory responses to bicycling 55 km (mean speed 9.7 m X s-1) outdoors (15 degrees C DB) were compared to equivalent cycle ergometry (90 min at 65% VO2max) in the laboratory (20-23 degrees C DB, 50% RH) in 7 trained cyclists. Outdoor environmental conditions were simulated with fans and lamps, and were contrasted with standard no-wind, no-sun laboratory conditions. Sweating rate was similar during outdoor and laboratory simulated outdoor cycling (0.90 and 0.87 to 0.94 1 X h-1 respectively). During outdoor bicycling, mean heart rate (161 bt X min-1) was 7-13% higher (p less than .05) than under laboratory conditions, suggesting a greater strain for a similar external work rate. The increase in rectal temperature (0.8 degrees C) was 33-50% less (p less than 0.05) at the cooler outdoor ambient temperature than in the laboratory. Thermoregulatory stress was greater under the no-fan, no-lamp laboratory condition than during simulated outdoor conditions (36-38% greater (p less than 0.05) sweating rate, 15-18% greater (p less than 0.01) mean skin temperature, 6.4 to 7.8 fold greater (p less than 0.01) amount of clothing-retrained sweat). The cooling wind encountered in actual road bicycling apparently reduces thermoregulatory and circulatory demands compared with stationary cycle ergometry indoors. Failure to account for this enhanced cooling may result in overestimation of the physiological stress of actual road cycling.(ABSTRACT TRUNCATED AT 250 WORDS)

  4. Limits to Global Groundwater Consumption

    NASA Astrophysics Data System (ADS)

    Graaf, I. D.; Van Beek, R.; Sutanudjaja, E.; Wada, Y.; Bierkens, M. F.

    2015-12-01

    In regions with frequent water stress and large aquifer systems, groundwater is often used as an additional fresh water source. For many regions of the world groundwater abstraction exceeds groundwater recharge and persistent groundwater depletion occurs. The most direct effect of groundwater depletion is declining of water tables, leading to reduced groundwater discharge needed to sustain base-flow to e.g. rivers. Next to that, pumping costs increase, wells dry up and land subsidence occurs. These problems are expected to increase in the near future due to growing population and climate changes. This poses the urgent question of what the limits are of groundwater consumption worldwide. We simulate global water availability (5 arc-minute resolution, for 1960-2050) using the hydrological model PCR-GLOBWB (van Beek et al. 2011), coupled to a groundwater model based on MODFLOW (de Graaf et al. 2015), allowing for groundwater - surface water interactions. The groundwater model includes a parameterization of world's confined and unconfined aquifer systems needed for a realistic simulation of groundwater head dynamics. Water demands are included (from Wada et al. 2014). We study the limits to water consumption, focusing on locally attainable groundwater and groundwater levels critical to rivers to sustain low flows. We show an increasing trend (1960-2050) in groundwater head declines, due to increase in groundwater demand. Also, stream flow will decrease and low flow conditions will occur more frequent and will be longer in duration in the near future, especially for irrigated areas. Next to that, we provide a global overview of the years it takes until groundwater gets unattainable for e.g. a local farmer (100 m below land-surface used as a proxy), and estimate the increase in pumping cost for the near future. The results show where and when limits of groundwater consumption are reached globally.

  5. Sociological Ambivalence and Funeral Consumption

    PubMed Central

    Canning, Louise

    2015-01-01

    This article builds on Hillcoat-Nallétamby and Phillips’ (2011) conceptualization of sociological ambivalence within the relational framework to examine a particular consumption practice, the funeral. We develop understanding of social, cultural and relational issues that arise from the experience associated with funeral-arranging. This is not a voluntary behaviour but one engaged with through force of circumstance and which involves commercial and relational decisions. Drawing on data from 10 interviews from a larger UK study, we focus on ambivalence surrounding choice and its impact on relations, showing how sentiments including love, obligation, regret and revenge evolve and transform past and future relationships. PMID:26236046

  6. Forests, Trees, and Micronutrient-Rich Food Consumption in Indonesia.

    PubMed

    Ickowitz, Amy; Rowland, Dominic; Powell, Bronwen; Salim, Mohammad Agus; Sunderland, Terry

    2016-01-01

    Micronutrient deficiency remains a serious problem in Indonesia with approximately 100 million people, or 40% of the population, suffering from one or more micronutrient deficiencies. In rural areas with poor market access, forests and trees may provide an essential source of nutritious food. This is especially important to understand at a time when forests and other tree-based systems in Indonesia are being lost at unprecedented rates. We use food consumption data from the 2003 Indonesia Demographic Health Survey for children between the ages of one and five years and data on vegetation cover from the Indonesian Ministry of Forestry to examine whether there is a relationship between different tree-dominated land classes and consumption of micronutrient-rich foods across the archipelago. We run our models on the aggregate sample which includes over 3000 observations from 25 provinces across Indonesia as well as on sub-samples from different provinces chosen to represent the different land classes. The results show that different tree-dominated land classes were associated with the dietary quality of people living within them in the provinces where they were dominant. Areas of swidden/agroforestry, natural forest, timber and agricultural tree crop plantations were all associated with more frequent consumption of food groups rich in micronutrients in the areas where these were important land classes. The swidden/agroforestry land class was the landscape associated with more frequent consumption of the largest number of micronutrient rich food groups. Further research needs to be done to establish what the mechanisms are that underlie these associations. Swidden cultivation in is often viewed as a backward practice that is an impediment to food security in Indonesia and destructive of the environment. If further research corroborates that swidden farming actually results in better nutrition than the practices that replace it, Indonesian policy makers may need to

  7. [Over-consumption of drugs by elderly patients].

    PubMed

    Paille, François

    2004-01-01

    Aging is a major factor in the over-consumption of drugs: although individuals aged >65 years account for approximately 15% of the population, almost one-third of all prescriptions are made out for this age group. This over-consumption is responsible for a number of potential hazards, such as iatrogenic pathology, poor compliance and drug interactions; it is also an economic burden. Most studies report an average of five drugs prescribed per individual, regardless of outpatient or inpatient status. Cardiovascular and psychotropic drugs are the most widely prescribed classes. Analgesic and nonsteroidal anti-inflammatory drugs are also very common. These are also the classes responsible for the highest number of adverse events in the elderly. There are numerous reasons for this over-consumption; in some cases, it is attributable to the patient himself (multiple diseases, deterioration of bodily functions, poor compliance, misuse, etc.), while in others, the prescribing physician, family or professional caregivers are at fault. The development of new drugs and the information made available regarding them can also be implicated. Studies comparing actual prescriptions with reference indications have shown that some are inappropriate: one meta-analysis showed that for 21.3% of patients in institutions and 40% of patients in convalescent homes, at least one prescription was inadequate; and in another analysis, the same applied to 12.5% of patients living at home. The potential seriousness of this over-consumption by elderly patients, even more so than in adults, calls for a detailed analysis of the situation and rational, regularly reviewed, realistic prescribing.

  8. Forests, Trees, and Micronutrient-Rich Food Consumption in Indonesia

    PubMed Central

    Ickowitz, Amy; Rowland, Dominic; Powell, Bronwen; Salim, Mohammad Agus; Sunderland, Terry

    2016-01-01

    Micronutrient deficiency remains a serious problem in Indonesia with approximately 100 million people, or 40% of the population, suffering from one or more micronutrient deficiencies. In rural areas with poor market access, forests and trees may provide an essential source of nutritious food. This is especially important to understand at a time when forests and other tree-based systems in Indonesia are being lost at unprecedented rates. We use food consumption data from the 2003 Indonesia Demographic Health Survey for children between the ages of one and five years and data on vegetation cover from the Indonesian Ministry of Forestry to examine whether there is a relationship between different tree-dominated land classes and consumption of micronutrient-rich foods across the archipelago. We run our models on the aggregate sample which includes over 3000 observations from 25 provinces across Indonesia as well as on sub-samples from different provinces chosen to represent the different land classes. The results show that different tree-dominated land classes were associated with the dietary quality of people living within them in the provinces where they were dominant. Areas of swidden/agroforestry, natural forest, timber and agricultural tree crop plantations were all associated with more frequent consumption of food groups rich in micronutrients in the areas where these were important land classes. The swidden/agroforestry land class was the landscape associated with more frequent consumption of the largest number of micronutrient rich food groups. Further research needs to be done to establish what the mechanisms are that underlie these associations. Swidden cultivation in is often viewed as a backward practice that is an impediment to food security in Indonesia and destructive of the environment. If further research corroborates that swidden farming actually results in better nutrition than the practices that replace it, Indonesian policy makers may need to

  9. Active Power Controls from Wind Power: Bridging the Gaps

    SciTech Connect

    Ela, E.; Gevorgian, V.; Fleming, P.; Zhang, Y. C.; Singh, M.; Muljadi, E.; Scholbrook, A.; Aho, J.; Buckspan, A.; Pao, L.; Singhvi, V.; Tuohy, A.; Pourbeik, P.; Brooks, D.; Bhatt, N.

    2014-01-01

    This paper details a comprehensive study undertaken by the National Renewable Energy Laboratory, Electric Power Research Institute, and the University of Colorado to understand how the contribution of wind power providing active power control (APC) can benefit the total power system economics, increase revenue streams, improve the reliability and security of the power system, and provide superior and efficient response while reducing any structural and loading impacts that may reduce the life of the wind turbine or its components. The study includes power system simulations, control simulations, and actual field tests using turbines at NREL's National Wind Technology Center (NWTC). The study focuses on synthetic inertial control, primary frequency control, and automatic generation control, and analyzes timeframes ranging from milliseconds to minutes to the lifetime of wind turbines, locational scope ranging from components of turbines to large wind plants to entire synchronous interconnections, and additional topics ranging from economics to power system engineering to control design.

  10. Socio-Demographic Differences in Energy Drink Consumption and Reasons for Consumption among US College Students

    ERIC Educational Resources Information Center

    Poulos, Natalie S.; Pasch, Keryn E.

    2016-01-01

    Background: Energy drink consumption has become increasingly prevalent among US college students, yet little is known about current rates of consumption and reasons for consumption among current energy drink users, particularly differences related to gender and race/ethnicity. Objectives: To better understand energy drink consumption alone and…

  11. Ketones suppress brain glucose consumption.

    PubMed

    LaManna, Joseph C; Salem, Nicolas; Puchowicz, Michelle; Erokwu, Bernadette; Koppaka, Smruta; Flask, Chris; Lee, Zhenghong

    2009-01-01

    The brain is dependent on glucose as a primary energy substrate, but is capable of utilizing ketones such as beta-hydroxybutyrate (beta HB) and acetoacetate (AcAc), as occurs with fasting, prolonged starvation or chronic feeding of a high fat/low carbohydrate diet (ketogenic diet). In this study, the local cerebral metabolic rate of glucose consumption (CMRglu; microM/min/100g) was calculated in the cortex and cerebellum of control and ketotic rats using Patlak analysis. Rats were imaged on a rodent PET scanner and MRI was performed on a 7-Tesla Bruker scanner for registration with the PET images. Plasma glucose and beta HB concentrations were measured and 90-minute dynamic PET scans were started simultaneously with bolus injection of 2-Deoxy-2[18F]Fluoro-D-Glucose (FDG). The blood radioactivity concentration was automatically sampled from the tail vein for 3 min following injection and manual periodic blood samples were taken. The calculated local CMRGlu decreased with increasing plasma BHB concentration in the cerebellum (CMRGlu = -4.07*[BHB] + 61.4, r2 = 0.3) and in the frontal cortex (CMRGlu = -3.93*[BHB] + 42.7, r2 = 0.5). These data indicate that, under conditions of ketosis, glucose consumption is decreased in the cortex and cerebellum by about 10% per each mM of plasma ketone bodies.

  12. Resource consumption, sustainability, and cancer.

    PubMed

    Kareva, Irina; Morin, Benjamin; Castillo-Chavez, Carlos

    2015-02-01

    Preserving a system's viability in the presence of diversity erosion is critical if the goal is to sustainably support biodiversity. Reduction in population heterogeneity, whether inter- or intraspecies, may increase population fragility, either decreasing its ability to adapt effectively to environmental changes or facilitating the survival and success of ordinarily rare phenotypes. The latter may result in over-representation of individuals who may participate in resource utilization patterns that can lead to over-exploitation, exhaustion, and, ultimately, collapse of both the resource and the population that depends on it. Here, we aim to identify regimes that can signal whether a consumer-resource system is capable of supporting viable degrees of heterogeneity. The framework used here is an expansion of a previously introduced consumer-resource type system of a population of individuals classified by their resource consumption. Application of the Reduction Theorem to the system enables us to evaluate the health of the system through tracking both the mean value of the parameter of resource (over)consumption, and the population variance, as both change over time. The article concludes with a discussion that highlights applicability of the proposed system to investigation of systems that are affected by particularly devastating overly adapted populations, namely cancerous cells. Potential intervention approaches for system management are discussed in the context of cancer therapies.

  13. Piezoelectric Power Requirements for Active Vibration Control

    NASA Technical Reports Server (NTRS)

    Brennan, Matthew C.; McGowan, Anna-Maria Rivas

    1997-01-01

    This paper presents a method for predicting the power consumption of piezoelectric actuators utilized for active vibration control. Analytical developments and experimental tests show that the maximum power required to control a structure using surface-bonded piezoelectric actuators is independent of the dynamics between the piezoelectric actuator and the host structure. The results demonstrate that for a perfectly-controlled system, the power consumption is a function of the quantity and type of piezoelectric actuators and the voltage and frequency of the control law output signal. Furthermore, as control effectiveness decreases, the power consumption of the piezoelectric actuators decreases. In addition, experimental results revealed a non-linear behavior in the material properties of piezoelectric actuators. The material non- linearity displayed a significant increase in capacitance with an increase in excitation voltage. Tests show that if the non-linearity of the capacitance was accounted for, a conservative estimate of the power can easily be determined.

  14. Electric power monthly, September 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  15. Eat fit. Get big? How fitness cues influence food consumption volumes.

    PubMed

    Koenigstorfer, Joerg; Groeppel-Klein, Andrea; Kettenbaum, Myriam; Klicker, Kristina

    2013-06-01

    Fitness cues on food packages are a common marketing practice in the food sector. This study aims to find out whether and how fitness cues influence food consumption. The results of two field studies show that, even though eating fitness-cued food does not help consumers become more fit, the claims on the packaging increase both serving size and actual food consumption. This effect is mediated by serving size inferences. Also, consumers feel less guilty and perceive themselves closer to desired fitness levels after having consumed the food. The findings show that packaging cues relating to energy expenditure can increase energy intake despite the fact that consumers are not engaged in any actual physical activity while eating the food.

  16. A realistic dynamic blower energy consumption model for wastewater applications.

    PubMed

    Amerlinck, Y; De Keyser, W; Urchegui, G; Nopens, I

    2016-10-01

    At wastewater treatment plants (WWTPs) aeration is the largest energy consumer. This high energy consumption requires an accurate assessment in view of plant optimization. Despite the ever increasing detail in process models, models for energy production still lack detail to enable a global optimization of WWTPs. A new dynamic model for a more accurate prediction of aeration energy costs in activated sludge systems, equipped with submerged air distributing diffusers (producing coarse or fine bubbles) connected via piping to blowers, has been developed and demonstrated. This paper addresses the model structure, its calibration and application to the WWTP of Mekolalde (Spain). The new model proved to give an accurate prediction of the real energy consumption by the blowers and captures the trends better than the constant average power consumption models currently being used. This enhanced prediction of energy peak demand, which dominates the price setting of energy, illustrates that the dynamic model is preferably used in multi-criteria optimization exercises for minimizing the energy consumption.

  17. Mapping water consumption for energy production around the Pacific Rim

    NASA Astrophysics Data System (ADS)

    Tidwell, Vincent; Moreland, Barbie

    2016-09-01

    World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium and unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. For six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.

  18. Mapping water consumption for energy production around the Pacific Rim

    DOE PAGES

    Tidwell, Vincent; Moreland, Barbie

    2016-09-07

    World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium andmore » unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. Furthermore, for six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.« less

  19. Mapping water consumption for energy production around the Pacific Rim

    SciTech Connect

    Tidwell, Vincent; Moreland, Barbie

    2016-09-07

    World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium and unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. Furthermore, for six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.

  20. Power and reduced temporal discounting.

    PubMed

    Joshi, Priyanka D; Fast, Nathanael J

    2013-04-01

    Decision makers generally feel disconnected from their future selves, an experience that leads them to prefer smaller immediate gains to larger future gains. This pervasive tendency is known as temporal discounting, and researchers across disciplines are interested in understanding how to overcome it. Following recent advances in the power literature, we suggest that the experience of power enhances one's connection with the future self, which in turn results in reduced temporal discounting. In Study 1, we found that participants assigned to high-power roles were less likely than participants assigned to low-power roles to display temporal discounting. In Studies 2 and 3, priming power reduced temporal discounting in monetary and nonmonetary tasks, and, further, connection with the future self mediated the relation between power and reduced discounting. In Study 4, experiencing a general sense of power in the workplace predicted actual lifetime savings. These results have important implications for future research.

  1. Tutorial on Actual Space Environmental Hazards For Space Systems (Invited)

    NASA Astrophysics Data System (ADS)

    Mazur, J. E.; Fennell, J. F.; Guild, T. B.; O'Brien, T. P.

    2013-12-01

    It has become common in the space science community to conduct research on diverse physical phenomena because they are thought to contribute to space weather. However, satellites contend with only three primary environmental hazards: single event effects, vehicle charging, and total dose, and not every physical phenomenon that occurs in space contributes in substantial ways to create these hazards. One consequence of the mismatch between actual threats and all-encompassing research is the often-described gap between research and operations; another is the creation of forecasts that provide no actionable information for design engineers or spacecraft operators. An example of the latter is the physics of magnetic field emergence on the Sun; the phenomenon is relevant to the formation and launch of coronal mass ejections and is also causally related to the solar energetic particles that may get accelerated in the interplanetary shock. Unfortunately for the research community, the engineering community mitigates the space weather threat (single-event effects from heavy ions above ~50 MeV/nucleon) with a worst-case specification of the environment and not with a prediction. Worst-case definition requires data mining of past events, while predictions involve large-scale systems science from the Sun to the Earth that is compelling for scientists and their funding agencies but not actionable for design or for most operations. Differing priorities among different space-faring organizations only compounds the confusion over what science research is relevant. Solar particle impacts to human crew arise mainly from the total ionizing dose from the solar protons, so the priority for prediction in the human spaceflight community is therefore much different than in the unmanned satellite community, while both communities refer to the fundamental phenomenon as space weather. Our goal in this paper is the presentation of a brief tutorial on the primary space environmental phenomena

  2. Addiction surplus: the add-on margin that makes addictive consumptions difficult to contain.

    PubMed

    Adams, Peter J; Livingstone, Charles

    2015-01-01

    Addictive consumptions generate financial surpluses over-and-above non-addictive consumptions because of the excessive consumption of addicted consumers. This add-on margin or 'addiction surplus' provides a powerful incentive for beneficiaries to protect their income by ensuring addicted consumers keep consuming. Not only that, addiction surplus provides the financial base that enables producers to sponsor activities which aim to prevent public health initiatives from reducing consumption. This paper examines the potency of addiction surplus to engage industry, governments and communities in an on-going reliance on addiction surplus. It then explores how neo-liberal constructions of a rational consumer disguise the ethical and exploitative dynamics of addiction surplus by examining ways in which addictive consumptions fail to conform to notions of autonomy and rationality. Four measures are identified to contain the distorting effects of addiction surplus.

  3. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... power consumption during the off mode, PW,OFF = 0, and the fossil fuel energy consumed during the off... 62301 (Second Edition) (incorporated by reference; see § 430.3), and the fossil fuel energy consumption... in Btu. 5.2 Average annual fossil fuel energy for pool heaters. The average annual fuel energy...

  4. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... shall be in Btu. 4.2Average annual fossil fuel energy for pool heaters. The average annual fuel energy... reference; see § 430.3) and the fossil fuel energy consumption during the standby test, Qp, in Btu. Ambient... switch, the average electric power consumption during the off mode, PW,OFF = 0, and the fossil...

  5. Phase Compensation Techniques for Low-Power Operational Amplifiers

    NASA Astrophysics Data System (ADS)

    Ito, Rui; Itakura, Tetsuro

    An operational amplifier is one of the key functional blocks and is widely used in analog and mixed-signal circuits. For low-power consumption, many techniques such as class AB and slew-rate enhancement have been proposed. Although phase compensation is related to power consumption, it has not been clearly discussed from the viewpoint of the power consumption. In this paper, the conventional and the improved Miller compensations and the phase compensation by introducing a new zero are dicussed for low-power operational amplifiers.

  6. Simulation of an ultralow-power power management circuit for MEMS cantilever piezoelectric vibration energy harvesters

    NASA Astrophysics Data System (ADS)

    Takei, Ryohei; Okada, Hironao; Makimoto, Natsumi; Itoh, Toshihiro; Kobayashi, Takeishi

    2016-10-01

    We developed a power management circuit for piezoelectric microelectromechanical system cantilever vibration energy harvesters (VEHs) with ultralow-power consumption. The power management circuit was effective in a wireless vibration monitoring system. To operate the system, ultralow-power electronics were required because only a small amount of electrical power was generated from the faint environmental vibration. Pb(Zr,Ti)O3 (PZT) and aluminum nitride (AlN) VEHs were fabricated and their equivalent circuits were extracted from output voltage measurements. The power management circuit was simulated using the extracted circuits. The simulation suggested that the power management circuit can be driven by a vibration acceleration of 1.0 m/s2 by lowering the power consumption of the power management circuit using existing electronics.

  7. Condensation heat transfer of actual flue gas on horizontal tubes

    SciTech Connect

    Osakabe, Masahiro; Itoh, Tugue; Yagi, Kiyoyuki

    1999-07-01

    In order to improve the boiler efficiency, latent heat recovery from an exhaust flue gas is a very important concept. Condensation heat transfer on horizontal stainless steel tubes was investigated experimentally using an actual flue gas from a natural gas boiler. The experiment was conducted at different air ratios and steam mass concentrations of the flue gas, and in a wide range of tube wall temperature. The condensation pattern was similar to the dropwise condensation near the dew point. As the wall temperature was decreased, the wall region covered with a thin liquid film increased. The heat and mass transfer behavior were well predicted with the simple analogy correlation in the high wall temperature region. But in the low wall temperature region, the total heat transfer rate was higher than that predicted by the simple analogy correlation. At a high steam mass concentration artificially generated with steam injection, the total heat transfer rate was higher than that predicted by the simple analogy correlation. The analogy correlation using the modified Sherwood number taking account of the mass absorption effect was proposed. The modified correlation gave a good prediction of the heat flux at the high steam mass concentration.

  8. A taxometric analysis of actual Internet sports gambling behavior.

    PubMed

    Braverman, Julia; LaBrie, Richard A; Shaffer, Howard J

    2011-03-01

    This article presents findings from the first taxometric study of actual gambling behavior to determine whether we can represent the characteristics of extreme gambling as qualitatively distinct (i.e., taxonic) or as a point along a dimension. We analyzed the bets made during a 24-month study period by the 4,595 most involved gamblers among a cohort of 48,114 people using an Internet service to gamble on sporting events. We applied two taxometric procedures (i.e., MAMBAC and MAXCOV) to three indicators of betting behavior: total money lost, total number of bets, and total money wagered. The results fail to provide support for the view that the most involved Internet sports gamblers include a distinct category of gamblers. More research is necessary to clarify the similar features of recreational and extreme gamblers and the dimensions that scientists can use to measure these behaviors. Finally, we discuss the implications of these findings for clinical, research, and public policy activities.

  9. Alternate corrections for estimating actual wetland evapotranspiration from potential evapotranspiration

    USGS Publications Warehouse

    Barclay, Shoemaker W.; Sumner, D.M.

    2006-01-01

    Corrections can be used to estimate actual wetland evapotranspiration (AET) from potential evapotranspiration (PET) as a means to define the hydrology of wetland areas. Many alternate parameterizations for correction coefficients for three PET equations are presented, covering a wide range of possible data-availability scenarios. At nine sites in the wetland Everglades of south Florida, USA, the relatively complex PET Penman equation was corrected to daily total AET with smaller standard errors than the PET simple and Priestley-Taylor equations. The simpler equations, however, required less data (and thus less funding for instrumentation), with the possibility of being corrected to AET with slightly larger, comparable, or even smaller standard errors. Air temperature generally corrected PET simple most effectively to wetland AET, while wetland stage and humidity generally corrected PET Priestley-Taylor and Penman most effectively to wetland AET. Stage was identified for PET Priestley-Taylor and Penman as the data type with the most correction ability at sites that are dry part of each year or dry part of some years. Finally, although surface water generally was readily available at each monitoring site, AET was not occurring at potential rates, as conceptually expected under well-watered conditions. Apparently, factors other than water availability, such as atmospheric and stomata resistances to vapor transport, also were limiting the PET rate. ?? 2006, The Society of Wetland Scientists.

  10. Actual development of the chenier coast of suriname (South America)

    NASA Astrophysics Data System (ADS)

    Augustinus, Pieter G. E. F.

    1980-04-01

    The Holocene coastal plain of Suriname is a chenier plain. Its actual sedimentological development has been studied during three field-work periods (1966, 1967/1968, 1972). Clay is the predominant sediment in this low- to medium-energy environment. It accumulates in extensive shoreface-attached mudflats (sometimes considered as giant mudwaves), which migrate continuously to the west due to deposition of slingmud at their west side and simultaneous erosion of the east side. In between the mudflats cheniers may develop. Thin-section analysis of the clay deposits revealed that they are built up of an alternation of thick clayey laminae and thin laminae of silt and fine sand. The clayey laminae chiefly show a unistrial plasmic fabric. Disturbaces in the upper zone are caused by bioturbation. Two types of cheniers can be distinguished. One type contains fine sand which has been winnowed out of the pelite deposits. Since this sand is brought from the shelf the chenier formation begins at approximately mean low-water level. Longshore bars are formed and these are driven shoreward by wave action. The other type is built up of medium to coarse sand supplied by a local river. It is transported westward by beachdrift in a narrow zone around the mean high-water line. These cheniers develop therefore at or just above the mean high-tide level. The sedimentary structures of both types of cheniers have many characteristics in common. However, each type also has its own distinct features.

  11. Reconciling actual and perceived rates of predation by domestic cats.

    PubMed

    McDonald, Jennifer L; Maclean, Mairead; Evans, Matthew R; Hodgson, Dave J

    2015-07-01

    The predation of wildlife by domestic cats (Felis catus) is a complex problem: Cats are popular companion animals in modern society but are also acknowledged predators of birds, herpetofauna, invertebrates, and small mammals. A comprehensive understanding of this conservation issue demands an understanding of both the ecological consequence of owning a domestic cat and the attitudes of cat owners. Here, we determine whether cat owners are aware of the predatory behavior of their cats, using data collected from 86 cats in two UK villages. We examine whether the amount of prey their cat returns influences the attitudes of 45 cat owners toward the broader issue of domestic cat predation. We also contribute to the wider understanding of physiological, spatial, and behavioral drivers of prey returns among cats. We find an association between actual prey returns and owner predictions at the coarse scale of predatory/nonpredatory behavior, but no correlation between the observed and predicted prey-return rates among predatory cats. Cat owners generally disagreed with the statement that cats are harmful to wildlife, and disfavored all mitigation options apart from neutering. These attitudes were uncorrelated with the predatory behavior of their cats. Cat owners failed to perceive the magnitude of their cats' impacts on wildlife and were not influenced by ecological information. Management options for the mitigation of cat predation appear unlikely to work if they focus on "predation awareness" campaigns or restrictions of cat freedom.

  12. Is transferring an educational innovation actually a process of transformation?

    PubMed

    Varpio, Lara; Bell, Robert; Hollingworth, Gary; Jalali, Alireza; Haidet, Paul; Levine, Ruth; Regehr, Glenn

    2012-08-01

    Recent debates question the extent to which adopting an educational innovation requires compromise between the innovation's original design and the adoption site's context. Through compromises, the innovation's fundamental principles may be transferred, transformed, or abandoned. This paper analyzes such compromises during the piloting of Team-Based Learning (TBL). We ask: When is the process of transferring an innovation actually a process of transformation? This study is an autoethnography of our research team's implementation process. Autoethnographies are personalized accounts where authors draw on their own experiences to extend understanding of a particular topic. To conduct this autoethnography, we used an in-depth, interactive interview with the piloting clinician educator. In the analysis of TBL's fundamental principles, some aspects of the principles transferred easily, while others were transformed. Analysis raised concerns that the transformations threatened the foundational principles of TBL. While an educational innovation's techniques may seem to be surface structures, they are realizations of deeper fundamental principles. The fundamental principles are themselves realizations of the innovation's foundational philosophy. When techniques and/or principles are modified to a context, it is important to analyze if the modifications continue to uphold the innovation's philosophy.

  13. Reconciling actual and perceived rates of predation by domestic cats

    PubMed Central

    McDonald, Jennifer L; Maclean, Mairead; Evans, Matthew R; Hodgson, Dave J

    2015-01-01

    The predation of wildlife by domestic cats (Felis catus) is a complex problem: Cats are popular companion animals in modern society but are also acknowledged predators of birds, herpetofauna, invertebrates, and small mammals. A comprehensive understanding of this conservation issue demands an understanding of both the ecological consequence of owning a domestic cat and the attitudes of cat owners. Here, we determine whether cat owners are aware of the predatory behavior of their cats, using data collected from 86 cats in two UK villages. We examine whether the amount of prey their cat returns influences the attitudes of 45 cat owners toward the broader issue of domestic cat predation. We also contribute to the wider understanding of physiological, spatial, and behavioral drivers of prey returns among cats. We find an association between actual prey returns and owner predictions at the coarse scale of predatory/nonpredatory behavior, but no correlation between the observed and predicted prey-return rates among predatory cats. Cat owners generally disagreed with the statement that cats are harmful to wildlife, and disfavored all mitigation options apart from neutering. These attitudes were uncorrelated with the predatory behavior of their cats. Cat owners failed to perceive the magnitude of their cats’ impacts on wildlife and were not influenced by ecological information. Management options for the mitigation of cat predation appear unlikely to work if they focus on “predation awareness” campaigns or restrictions of cat freedom. PMID:26306163

  14. Remotely sensed actual evapotranspiration: implications for groundwater management in Botswana.

    NASA Astrophysics Data System (ADS)

    Timmermans, W. J.; Meijerink, A. M. J.

    In order to determine evapotranspiration losses from the groundwater of an aquifer in Botswana during the dry season, the multi-step Surface Energy Balance Algorithm for Land (SEBAL) was applied using sequential Landsat TM and NOAA-AVHRR data. During satellite overpasses, continuous data on surface temperatures and soil moisture were available from a meteorological tower and field observations for calibration and partial validation of the results. The SEBAL method yielded high actual evapotranspiration (E a) rates (1.5 - 3 mm/d), if relatively dense savannah vegetation was present, even when the water-table was over 30 m deep, as is the case in the upper part of the aquifer. No relationship between Ea and depth to water-table was found, except in the valleys, where riverine forests are fed by a system of discharging groundwater flow. The patterns on a vegetation map, based on a supervised classification using TM data, including thermal bands, showed similarity with the E a patterns. The spatial distributions of vegetation types and of E a have been interpreted as important uptake of water by deep roots; this is supported by increasing evidence from other parts of the world. Sap flow was measured in tall bushes near the tower site. The upper part (2 m) of the soil was dry. The results have implications for the groundwater recharge mechanism and the management of groundwater. Further validation studies have been initiated.

  15. Virtual reality as telemedicine tool: technology, ergonomics and actual applications.

    PubMed

    Riva, G; Gamberini, L

    2000-01-01

    This paper surveys the state of the art in telemedicine applications of virtual environments (VEs) and related technologies for health care. The possible use of VEs as telemedicine tool has attracted much interest in medicine. Actually this technology is commonly used in remote or augmented surgery, and surgical training, which are critically dependent upon eye-hand coordination. Recently, however, different researchers have tried to use VEs in anatomic learning and for the assessment and rehabilitation in neuro-psychology. To date, such applications have improved the quality of health care, and later they will lead to substantial cost savings. Tools that respond to the needs of present VE systems are being refined or developed. However, the possible use of VEs in telemedicine is not linked to the solution of technical problems only. In fact telemedicine is not simply a technology but a complex process whose successful exploitation needs significant attention to ergonomics, human factors and organizational changes in the structure of the relevant health service.

  16. Moderate alcohol consumption stimulates food intake and food reward of savoury foods.

    PubMed

    Schrieks, Ilse C; Stafleu, Annette; Griffioen-Roose, Sanne; de Graaf, Cees; Witkamp, Renger F; Boerrigter-Rijneveld, Rianne; Hendriks, Henk F J

    2015-06-01

    The aim of this study was to investigate whether food reward plays a role in the stimulating effect of moderate alcohol consumption on subsequent food intake. In addition, we explored the role of oral and gut sensory pathways in alcohol's effect on food reward by modified sham feeding (MSF) or consumption of a preload after alcohol intake.In a single-blind crossover design, 24 healthy men were randomly assigned to either consumption of vodka/orange juice (20 g alcohol) or orange juice only, followed by consumption of cake, MSF of cake or no cake. Food reward was evaluated by actual food intake measured by an ad libitum lunch 45 min after alcohol ingestion and by behavioural indices of wanting and liking of four food categories (high fat, low fat, sweet and savoury).Moderate alcohol consumption increased food intake during the ad libitum lunch by 11% (+338 kJ, P = 0.004). Alcohol specifically increased intake (+127 kJ, P <0.001) and explicit liking (P = 0.019) of high-fat savoury foods. Moreover, moderate alcohol consumption increased implicit wanting for savoury (P = 0.013) and decreased implicit wanting for sweet (P = 0.017) before the meal. Explicit wanting of low-fat savoury foods only was higher after alcohol followed by no cake as compared to after alcohol followed by cake MSF (P = 0.009), but not as compared to alcohol followed by cake consumption (P = 0.082). Both cake MSF and cake consumption had no overall effect on behavioural indices of food reward.To conclude, moderate alcohol consumption increased subsequent food intake, specifically of high-fat savoury foods. This effect was related to the higher food reward experienced for savoury foods. The importance of oral and gut sensory signalling in alcohol's effect on food reward remains largely unclear.

  17. Beverage Consumption Patterns among Norwegian Adults.

    PubMed

    Paulsen, Mari Mohn; Myhre, Jannicke Borch; Andersen, Lene Frost

    2016-09-13

    Beverages may be important contributors for energy intake and dietary quality. The purpose of the study was to investigate how beverage consumption varies between different meals (breakfast, lunch, dinner, supper/evening meal, snacks) and between weekdays and weekend-days in Norwegian adults. A cross-sectional dietary survey was conducted among Norwegian adults (n = 1787) in 2010-2011. Two telephone-administered 24 h recalls were used for dietary data collection. Breakfast was the most important meal for milk and juice consumption, dinner for sugar-sweetened beverages and wine, and snacks for water, coffee, artificially sweetened beverages, and beer. Consumption of sugar-sweetened and artificially sweetened beverages did not differ between weekdays and weekend-days among consumers. The average intake of wine and beer (men only) was higher on weekend-days. Higher age was positively associated with wine consumption and negatively associated with consumption of water, sugar-sweetened, and artificially sweetened beverages. Higher education was associated with consumption of water, beer, and wine, whereas lower education was associated with sugar-sweetened beverage consumption. Beverage consumption patterns among Norwegian adults vary between different meal types and in subgroups of the population. Alcohol consumption was higher on weekend-days. Knowledge regarding beverage consumption patterns in the population should be considered when revising dietary guidelines in the future.

  18. Beverage Consumption Patterns among Norwegian Adults

    PubMed Central

    Paulsen, Mari Mohn; Myhre, Jannicke Borch; Andersen, Lene Frost

    2016-01-01

    Beverages may be important contributors for energy intake and dietary quality. The purpose of the study was to investigate how beverage consumption varies between different meals (breakfast, lunch, dinner, supper/evening meal, snacks) and between weekdays and weekend-days in Norwegian adults. A cross-sectional dietary survey was conducted among Norwegian adults (n = 1787) in 2010–2011. Two telephone-administered 24 h recalls were used for dietary data collection. Breakfast was the most important meal for milk and juice consumption, dinner for sugar-sweetened beverages and wine, and snacks for water, coffee, artificially sweetened beverages, and beer. Consumption of sugar-sweetened and artificially sweetened beverages did not differ between weekdays and weekend-days among consumers. The average intake of wine and beer (men only) was higher on weekend-days. Higher age was positively associated with wine consumption and negatively associated with consumption of water, sugar-sweetened, and artificially sweetened beverages. Higher education was associated with consumption of water, beer, and wine, whereas lower education was associated with sugar-sweetened beverage consumption. Beverage consumption patterns among Norwegian adults vary between different meal types and in subgroups of the population. Alcohol consumption was higher on weekend-days. Knowledge regarding beverage consumption patterns in the population should be considered when revising dietary guidelines in the future. PMID:27649236

  19. Plants Consumption and Liver Health

    PubMed Central

    Guan, Yong-Song; He, Qing

    2015-01-01

    The liver is a very important organ with a lot of functions for the host to survive. Dietary components are essential for and can be beneficial or detrimental to the healthy or diseased liver. Plants food is an essential part of the human diet and comprises various compounds which are closely related to liver health. Selected food plants can provide nutritional and medicinal support for liver disease. At the present, the knowledge of the effects of plants on the liver is still incomplete. The most urgent task at the present time is to find the best dietary and medicinal plants for liver health in an endless list of candidates. This review article updates the knowledge about the effects of plants consumption on the health of the liver, putting particular emphasis on the potential beneficial and harmful impact of dietary and medicinal plants on liver function. PMID:26221179

  20. Household vehicles energy consumption 1991

    SciTech Connect

    Not Available

    1993-12-09

    The purpose of this report is to provide information on the use of energy in residential vehicles in the 50 States and the District of Columbia. Included are data about: the number and type of vehicles in the residential sector, the characteristics of those vehicles, the total annual Vehicle Miles Traveled (VMT), the per household and per vehicle VMT, the vehicle fuel consumption and expenditures, and vehicle fuel efficiencies. The data for this report are based on the household telephone interviews from the 1991 RTECS, conducted during 1991 and early 1992. The 1991 RTECS represents 94.6 million households, of which 84.6 million own or have access to 151.2 million household motor vehicles in the 50 States and the District of Columbia.

  1. Energy consumption in thermomechanical pulping

    SciTech Connect

    Marton, R.; Tsujimoto, N.; Eskelinen, E.

    1981-08-01

    Various components of refining energy were determined experimentally and compared with those calculated on the basis of the dimensions of morphological elements of wood. The experimentally determined fiberization energy of spruce was 6 to 60 times larger than the calculated value and that of birch 3 to 15 times larger. The energy consumed in reducing the Canadian standard freeness of isolated fibers from 500 to 150 ml was found to be approximately 1/3 of the total fiber development energy for both spruce and birch TMP. Chip size affected the refining energy consumption; the total energy dropped by approximately 30% when chip size was reduced from 16 mm to 3 mm in the case of spruce and approximately 40% for birch. 6 refs.

  2. Chronic coral consumption by butterflyfishes

    NASA Astrophysics Data System (ADS)

    Cole, A. J.; Lawton, R. J.; Pratchett, M. S.; Wilson, S. K.

    2011-03-01

    Interactions between predators and prey organisms are of fundamental importance to ecological communities. While the ecological impact that grazing predators can have in terrestrial and temperate marine systems are well established, the importance of coral grazers on tropical reefs has rarely been considered. In this study, we estimate the biomass of coral tissue consumed by four prominent species of corallivorous butterflyfishes. Sub-adult butterflyfishes (60-70 mm, 6-11 g) remove between 0.6 and 0.9 g of live coral tissue per day, while larger adults (>110 mm, ~40-50 g) remove between 1.5 and 3 g of coral tissue each day. These individual consumption rates correspond to the population of coral-feeding butterflyfishes at three exposed reef crest habitats at Lizard Island, Great Barrier Reef, consuming between 14.6 g (±2.0) and 19.6 g (±3.9) .200 m-2 day-1 of coral tissue. When standardised to the biomass of butterflyfishes present, a combined reefwide removal rate of 4.2 g (±1.2) of coral tissue is consumed per 200 m-2 kg-1 of coral-feeding butterflyfishes. The quantity of coral tissue removed by these predators is considerably larger than previously expected and indicates that coral grazers are likely to play an important role in the transfer of energy fixed by corals to higher consumers. Chronic coral consumption by butterflyfishes is expected to exact a large energetic cost upon prey corals and contribute to an increased rate of coral loss on reefs already threatened by anthropogenic pressure and ongoing climate change.

  3. Waiting for Merlot: anticipatory consumption of experiential and material purchases.

    PubMed

    Kumar, Amit; Killingsworth, Matthew A; Gilovich, Thomas

    2014-10-01

    Experiential purchases (money spent on doing) tend to provide more enduring happiness than material purchases (money spent on having). Although most research comparing these two types of purchases has focused on their downstream hedonic consequences, the present research investigated hedonic differences that occur before consumption. We argue that waiting for experiences tends to be more positive than waiting for possessions. Four studies demonstrate that people derive more happiness from the anticipation of experiential purchases and that waiting for an experience tends to be more pleasurable and exciting than waiting to receive a material good. We found these effects in studies using questionnaires involving a variety of actual planned purchases, in a large-scale experience-sampling study, and in an archival analysis of news stories about people waiting in line to make a purchase. Consumers derive value from anticipation, and that value tends to be greater for experiential than for material purchases.

  4. Residential Energy Consumption Survey (RECS ) 2009 Technical Documentation - Summary

    EIA Publications

    2013-01-01

    RECS is a periodic survey sponsored by the U.S. Energy Information Administration (EIA) that provides detailed information about energy usage in U.S. homes. RECS is a multi-year effort consisting of a Household Survey phase, data collection from household energy suppliers, and detailed consumption and expenditures estimation. The Household Survey collects data on energy-related characteristics and usage patterns of a nationally representative sample of housing units. For renters that do not directly pay for their energy usage, a supplementary Rental Agent Survey is conducted. The Energy Supplier Surveys (ESS) collect data on how much electricity, natural gas, propane/LPG, fuel oil, and kerosene were consumed in the sampled housing unit during the reference year. It also collects data on actual dollar amounts spent on these energy sources.

  5. The inequality of water scarcity events: who is actually being affected?

    NASA Astrophysics Data System (ADS)

    Veldkamp, Ted I. E.; Wada, Yoshihide; Kummu, Matti; Aerts, Jeroen C. J. H.; Ward, Philip J.

    2015-04-01

    Over the past decades, changing hydro-climatic and socioeconomic conditions increased regional and global water scarcity problems. In the near future, projected changes in human water use and population growth - in combination with climate change - are expected to aggravate water scarcity conditions and its associated impacts on our society. Whilst a wide range of studies have modelled past and future regional and global patterns of change in population or land area impacted by water scarcity conditions, less attention is paid on who is actually affected and how vulnerable this share of the population is to water scarcity conditions. The actual impact of water scarcity events, however, not only depends on the numbers being affected, but merely on how sensitive this population is to water scarcity conditions, how quick and efficient governments can deal with the problems induced by water scarcity, and how many (financial and infrastructural) resources are available to cope with water scarce conditions. Only few studies have investigated the above mentioned interactions between societal composition and water scarcity conditions (e.g. by means of the social water scarcity index and the water poverty index) and, up to our knowledge, a comprehensive global analysis including different water scarcity indicators and multiple climate and socioeconomic scenarios is missing. To address this issue, we assess in this contribution the adaptive capacity of a society to water scarcity conditions, evaluate how this may be driven by different societal factors, and discuss how enhanced knowledge on this topic could be of interest for water managers in their design of adaptation strategies coping with water scarcity events. For that purpose, we couple spatial information on water scarcity conditions with different components from, among others, the Human Development Index and the Worldwide Governance Indicators, such as: the share of the population with an income below the poverty

  6. A modified exponential behavioral economic demand model to better describe consumption data.

    PubMed

    Koffarnus, Mikhail N; Franck, Christopher T; Stein, Jeffrey S; Bickel, Warren K

    2015-12-01

    Behavioral economic demand analyses that quantify the relationship between the consumption of a commodity and its price have proven useful in studying the reinforcing efficacy of many commodities, including drugs of abuse. An exponential equation proposed by Hursh and Silberberg (2008) has proven useful in quantifying the dissociable components of demand intensity and demand elasticity, but is limited as an analysis technique by the inability to correctly analyze consumption values of zero. We examined an exponentiated version of this equation that retains all the beneficial features of the original Hursh and Silberberg equation, but can accommodate consumption values of zero and improves its fit to the data. In Experiment 1, we compared the modified equation with the unmodified equation under different treatments of zero values in cigarette consumption data collected online from 272 participants. We found that the unmodified equation produces different results depending on how zeros are treated, while the exponentiated version incorporates zeros into the analysis, accounts for more variance, and is better able to estimate actual unconstrained consumption as reported by participants. In Experiment 2, we simulated 1,000 datasets with demand parameters known a priori and compared the equation fits. Results indicated that the exponentiated equation was better able to replicate the true values from which the test data were simulated. We conclude that an exponentiated version of the Hursh and Silberberg equation provides better fits to the data, is able to fit all consumption values including zero, and more accurately produces true parameter values.

  7. Food consumption patterns and economic growth. Increasing affluence and the use of natural resources.

    PubMed

    Gerbens-Leenes, P W; Nonhebel, S; Krol, M S

    2010-12-01

    This study analyzes relationships between food supply, consumption and income, taking supply, meat and dairy, and consumption composition (in macronutrients) as indicators, with annual per capita GDP as indicator for income. It compares food consumption patterns for 57 countries (2001) and gives time trends for western and southern Europe. Cross-sectional and time series relationships show similar patterns of change. For low income countries, GDP increase is accompanied by changes towards food consumption patterns with large gaps between supply and actual consumption. Total supply differs by a factor of two between low and high income countries. People in low income countries derive nutritional energy mainly from carbohydrates; the contribution of fats is small, that of protein the same as for high income countries and that of meat and dairy negligible. People in high income countries derive nutritional energy mainly from carbohydrates and fat, with substantial contribution of meat and dairy. Whenever and wherever economic growth occurs, food consumption shows similar change in direction. The European nutrition transition happened gradually, enabling agriculture and trade to keep pace with demand growth. Continuation of present economic trends might cause significant pressure on natural resources, because changes in food demand occur much faster than in the past, especially in Asia.

  8. Power spectral estimation algorithms

    NASA Technical Reports Server (NTRS)

    Bhatia, Manjit S.

    1989-01-01

    Algorithms to estimate the power spectrum using Maximum Entropy Methods were developed. These algorithms were coded in FORTRAN 77 and were implemented on the VAX 780. The important considerations in this analysis are: (1) resolution, i.e., how close in frequency two spectral components can be spaced and still be identified; (2) dynamic range, i.e., how small a spectral peak can be, relative to the largest, and still be observed in the spectra; and (3) variance, i.e., how accurate the estimate of the spectra is to the actual spectra. The application of the algorithms based on Maximum Entropy Methods to a variety of data shows that these criteria are met quite well. Additional work in this direction would help confirm the findings. All of the software developed was turned over to the technical monitor. A copy of a typical program is included. Some of the actual data and graphs used on this data are also included.

  9. Economics of electron beam accelerator facilities: Concept vs actual

    NASA Astrophysics Data System (ADS)

    Minbiole, Paul R.

    1995-02-01

    Electron beam accelerator facilities continue to demonstrate their ability to "add value" to a wide range of industrial products. The power, energy, and reliability of commercially available accelerators have increased steadily over the past several decades. The high throughput potential of modern electron beam facilities, together with the broad spectrum of commercial applications, result in the concept that an electron beam facility is an effective tool for adding economic value to industrial products. However, the high capital costs of such a facility (including hidden costs), together with practical limitations to high throughput (including several layers of inefficiencies), result in profit-and-loss economics which are more tenuous than expected after first analysis.

  10. Beaked Whales Respond to Simulated and Actual Navy Sonar

    PubMed Central

    Tyack, Peter L.; Zimmer, Walter M. X.; Moretti, David; Southall, Brandon L.; Claridge, Diane E.; Durban, John W.; Clark, Christopher W.; D'Amico, Angela; DiMarzio, Nancy; Jarvis, Susan; McCarthy, Elena; Morrissey, Ronald; Ward, Jessica; Boyd, Ian L.

    2011-01-01

    Beaked whales have mass stranded during some naval sonar exercises, but the cause is unknown. They are difficult to sight but can reliably be detected by listening for echolocation clicks produced during deep foraging dives. Listening for these clicks, we documented Blainville's beaked whales, Mesoplodon densirostris, in a naval underwater range where sonars are in regular use near Andros Island, Bahamas. An array of bottom-mounted hydrophones can detect beaked whales when they click anywhere within the range. We used two complementary methods to investigate behavioral responses of beaked whales to sonar: an opportunistic approach that monitored whale responses to multi-day naval exercises involving tactical mid-frequency sonars, and an experimental approach using playbacks of simulated sonar and control sounds to whales tagged with a device that records sound, movement, and orientation. Here we show that in both exposure conditions beaked whales stopped echolocating during deep foraging dives and moved away. During actual sonar exercises, beaked whales were primarily detected near the periphery of the range, on average 16 km away from the sonar transmissions. Once the exercise stopped, beaked whales gradually filled in the center of the range over 2–3 days. A satellite tagged whale moved outside the range during an exercise, returning over 2–3 days post-exercise. The experimental approach used tags to measure acoustic exposure and behavioral reactions of beaked whales to one controlled exposure each of simulated military sonar, killer whale calls, and band-limited noise. The beaked whales reacted to these three sound playbacks at sound pressure levels below 142 dB re 1 µPa by stopping echolocation followed by unusually long and slow ascents from their foraging dives. The combined results indicate similar disruption of foraging behavior and avoidance by beaked whales in the two different contexts, at exposures well below those used by regulators to define

  11. Using lysimeters to test the Penman Monteith actual evapotranspiration.

    NASA Astrophysics Data System (ADS)

    Ben Asher, Jiftah; Volinski, Roman; Zilberman, Arkadi; Bar Yosef, Beni; Silber, Avner

    2015-04-01

    Differences in actual transpiration (ETa) of banana plants were quantified in a lysimeter experiment. ETA was computed using instantaneous data from two weighing lysimeters and compared to PM (Penman-Monteith) model for ETa. Two critical problems were faced in this test. A) Estimating canopy and aerodynamic resistances ("rc" and "ra" respectively ) and B) converting the lysimeter changes in water volume ( LYv cm3 ) to ETa length units ( cm ). The two unknowns " rc" and "ra" were obtained from continuous measurements of the differences between canopy and air temperature (Tc - Ta). This difference was established by means of the infrared thermometry which was followed by numerical and analytical calculation of ETa using the modification suggested by R. Jackson to the PM model. The conversion of lysimeter volumetric units (LYv) to ETa length units was derived from the slope of cumulative LYv/ETa. This relationship was significantly linear (r2=0.97and 0.98.). Its slope was interpreted as "evaporating leaf area" which accounted for 1.8E4 cm2 in lysimeter 1 and 2.3E4 cm2.in lysimeter 2 . The comparison between LYv and PM model was acceptable even under very low ETa. The average of two lysimeters was 1.1mm/day (1.4 mm/day , LYv 1 and 0.8 LYv 2) while ETa calculated on the basis of PM model was 1.2 mm/day. It was concluded that although lysimeters are most accurate systems to measure ETa one of its disadvantages ( beside the high cost) is the volumetric output that in many cases should be supported by a one dimensional energy balance system. The PM model was found to be a reliable complementary tool to convert lysimeters volumetric output into conventional length units of ETa.

  12. Beaked whales respond to simulated and actual navy sonar.

    PubMed

    Tyack, Peter L; Zimmer, Walter M X; Moretti, David; Southall, Brandon L; Claridge, Diane E; Durban, John W; Clark, Christopher W; D'Amico, Angela; DiMarzio, Nancy; Jarvis, Susan; McCarthy, Elena; Morrissey, Ronald; Ward, Jessica; Boyd, Ian L

    2011-03-14

    Beaked whales have mass stranded during some naval sonar exercises, but the cause is unknown. They are difficult to sight but can reliably be detected by listening for echolocation clicks produced during deep foraging dives. Listening for these clicks, we documented Blainville's beaked whales, Mesoplodon densirostris, in a naval underwater range where sonars are in regular use near Andros Island, Bahamas. An array of bottom-mounted hydrophones can detect beaked whales when they click anywhere within the range. We used two complementary methods to investigate behavioral responses of beaked whales to sonar: an opportunistic approach that monitored whale responses to multi-day naval exercises involving tactical mid-frequency sonars, and an experimental approach using playbacks of simulated sonar and control sounds to whales tagged with a device that records sound, movement, and orientation. Here we show that in both exposure conditions beaked whales stopped echolocating during deep foraging dives and moved away. During actual sonar exercises, beaked whales were primarily detected near the periphery of the range, on average 16 km away from the sonar transmissions. Once the exercise stopped, beaked whales gradually filled in the center of the range over 2-3 days. A satellite tagged whale moved outside the range during an exercise, returning over 2-3 days post-exercise. The experimental approach used tags to measure acoustic exposure and behavioral reactions of beaked whales to one controlled exposure each of simulated military sonar, killer whale calls, and band-limited noise. The beaked whales reacted to these three sound playbacks at sound pressure levels below 142 dB re 1 µPa by stopping echolocation followed by unusually long and slow ascents from their foraging dives. The combined results indicate similar disruption of foraging behavior and avoidance by beaked whales in the two different contexts, at exposures well below those used by regulators to define

  13. Biomass burning fuel consumption dynamics in the tropics and subtropics assessed from satellite

    NASA Astrophysics Data System (ADS)

    Andela, Niels; van der Werf, Guido R.; Kaiser, Johannes W.; van Leeuwen, Thijs T.; Wooster, Martin J.; Lehmann, Caroline E. R.

    2016-06-01

    Landscape fires occur on a large scale in (sub)tropical savannas and grasslands, affecting ecosystem dynamics, regional air quality and concentrations of atmospheric trace gasses. Fuel consumption per unit of area burned is an important but poorly constrained parameter in fire emission modelling. We combined satellite-derived burned area with fire radiative power (FRP) data to derive fuel consumption estimates for land cover types with low tree cover in South America, Sub-Saharan Africa, and Australia. We developed a new approach to estimate fuel consumption, based on FRP data from the polar-orbiting Moderate Resolution Imaging Spectroradiometer (MODIS) and the geostationary Spinning Enhanced Visible and Infrared Imager (SEVIRI) in combination with MODIS burned-area estimates. The fuel consumption estimates based on the geostationary and polar-orbiting instruments showed good agreement in terms of spatial patterns. We used field measurements of fuel consumption to constrain our results, but the large variation in fuel consumption in both space and time complicated this comparison and absolute fuel consumption estimates remained more uncertain. Spatial patterns in fuel consumption could be partly explained by vegetation productivity and fire return periods. In South America, most fires occurred in savannas with relatively long fire return periods, resulting in comparatively high fuel consumption as opposed to the more frequently burning savannas in Sub-Saharan Africa. Strikingly, we found the infrequently burning interior of Australia to have higher fuel consumption than the more productive but frequently burning savannas in northern Australia. Vegetation type also played an important role in explaining the distribution of fuel consumption, by affecting both fuel build-up rates and fire return periods. Hummock grasslands, which were responsible for a large share of Australian biomass burning, showed larger fuel build-up rates than equally productive grasslands in

  14. Household energy consumption and expenditures 1993

    SciTech Connect

    1995-10-05

    This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expenditures than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.

  15. Power management for energy harvesting wireless sensors

    NASA Astrophysics Data System (ADS)

    Arms, S. W.; Townsend, C. P.; Churchill, D. L.; Galbreath, J. H.; Mundell, S. W.

    2005-05-01

    The objective of this work was to demonstrate smart wireless sensing nodes capable of operation at extremely low power levels. These systems were designed to be compatible with energy harvesting systems using piezoelectric materials and/or solar cells. The wireless sensing nodes included a microprocessor, on-board memory, sensing means (1000 ohm foil strain gauge), sensor signal conditioning, 2.4 GHz IEEE 802.15.4 radio transceiver, and rechargeable battery. Extremely low power consumption sleep currents combined with periodic, timed wake-up was used to minimize the average power consumption. Furthermore, we deployed pulsed sensor excitation and microprocessor power control of the signal conditioning elements to minimize the sensors" average contribution to power draw. By sleeping in between samples, we were able to demonstrate extremely low average power consumption. At 10 Hz, current consumption was 300 microamps at 3 VDC (900 microwatts); at 5 Hz: 400 microwatts, at 1 Hz: 90 microwatts. When the RF stage was not used, but data were logged to memory, consumption was further reduced. Piezoelectric strain energy harvesting systems delivered ~2000 microwatts under low level vibration conditions. Output power levels were also measured from two miniature solar cells; which provided a wide range of output power (~100 to 1400 microwatts), depending on the light type & distance from the source. In summary, system power consumption may be reduced by: 1) removing the load from the energy harvesting & storage elements while charging, 2) by using sleep modes in between samples, 3) pulsing excitation to the sensing and signal conditioning elements in between samples, and 4) by recording and/or averaging, rather than frequently transmitting, sensor data.

  16. Health implications of fructose consumption: A review of recent data.

    PubMed

    Rizkalla, Salwa W

    2010-11-04

    This paper reviews evidence in the context of current research linking dietary fructose to health risk markers.Fructose intake has recently received considerable media attention, most of which has been negative. The assertion has been that dietary fructose is less satiating and more lipogenic than other sugars. However, no fully relevant data have been presented to account for a direct link between dietary fructose intake and health risk markers such as obesity, triglyceride accumulation and insulin resistance in humans. First: a re-evaluation of published epidemiological studies concerning the consumption of dietary fructose or mainly high fructose corn syrup shows that most of such studies have been cross-sectional or based on passive inaccurate surveillance, especially in children and adolescents, and thus have not established direct causal links. Second: research evidence of the short or acute term satiating power or increasing food intake after fructose consumption as compared to that resulting from normal patterns of sugar consumption, such as sucrose, remains inconclusive. Third: the results of longer-term intervention studies depend mainly on the type of sugar used for comparison. Typically aspartame, glucose, or sucrose is used and no negative effects are found when sucrose is used as a control group.Negative conclusions have been drawn from studies in rodents or in humans attempting to elucidate the mechanisms and biological pathways underlying fructose consumption by using unrealistically high fructose amounts.The issue of dietary fructose and health is linked to the quantity consumed, which is the same issue for any macro- or micro nutrients. It has been considered that moderate fructose consumption of ≤50g/day or ~10% of energy has no deleterious effect on lipid and glucose control and of ≤100g/day does not influence body weight. No fully relevant data account for a direct link between moderate dietary fructose intake and health risk markers.

  17. Supporting Sustainable Food Consumption: Mental Contrasting with Implementation Intentions (MCII) Aligns Intentions and Behavior.

    PubMed

    Loy, Laura S; Wieber, Frank; Gollwitzer, Peter M; Oettingen, Gabriele

    2016-01-01

    With growing awareness that sustainable consumption is important for quality of life on earth, many individuals intend to act more sustainably. In this regard, interest in reducing meat consumption is on the rise. However, people often do not translate intentions into actual behavior change. To address this intention-behavior gap, we tested the self-regulation strategy of mental contrasting with implementation intentions (MCII). Here, people identify and imagine a desired future and current obstacles standing in its way. They address the obstacles with if-then plans specifying when, where, and how to act differently. In a 5-week randomized controlled experimental study, we compared an information + MCII intervention with an information-only control intervention. As hypothesized, only MCII participants' intention of reducing their meat consumption was predictive of their actual reduction, while no correspondence between intention and behavior change was found for control participants. Participants with a moderate to strong intention to reduce their meat consumption reduced it more in the MCII than in the control condition. Thus, MCII helped to narrow the intention-behavior gap and supported behavior change for those holding moderate and strong respective intentions.

  18. Supporting Sustainable Food Consumption: Mental Contrasting with Implementation Intentions (MCII) Aligns Intentions and Behavior

    PubMed Central

    Loy, Laura S.; Wieber, Frank; Gollwitzer, Peter M.; Oettingen, Gabriele

    2016-01-01

    With growing awareness that sustainable consumption is important for quality of life on earth, many individuals intend to act more sustainably. In this regard, interest in reducing meat consumption is on the rise. However, people often do not translate intentions into actual behavior change. To address this intention-behavior gap, we tested the self-regulation strategy of mental contrasting with implementation intentions (MCII). Here, people identify and imagine a desired future and current obstacles standing in its way. They address the obstacles with if-then plans specifying when, where, and how to act differently. In a 5-week randomized controlled experimental study, we compared an information + MCII intervention with an information-only control intervention. As hypothesized, only MCII participants’ intention of reducing their meat consumption was predictive of their actual reduction, while no correspondence between intention and behavior change was found for control participants. Participants with a moderate to strong intention to reduce their meat consumption reduced it more in the MCII than in the control condition. Thus, MCII helped to narrow the intention-behavior gap and supported behavior change for those holding moderate and strong respective intentions. PMID:27199840

  19. Interactive group education for refugees from the Former Yugoslavia to reduce their oil consumption.

    PubMed

    Kruseman, Maaike; Stoll, Beat E; Stalder, Hans

    2003-02-01

    In 1999 at an outpatient dietetic consultation in Geneva, Switzerland, 20% of the patients were refugees. Most were from the Former Yugoslavia. The main goal of dietary counseling was to decrease their fat consumption. As one-on-one counseling was unsuccessful, a pilot intervention was developed to explore the potential of participatory workshops for identifying and implementing appropriate behaviors. Four series of three workshops were held. Participants identified and practiced ways to reduce fat consumption. Knowledge skills were measured on completion of the workshops and 6 months later. Oil was highly valued in participants' representation of health. However, average reduction of oil per recipe was 58%, or 35 ml (95% CI: 15-55). The application of oil-sparing techniques increased nine-fold. Such an approach may be an alternative to one-on-one dietary counseling where this is ineffective. Next steps should include a trial to determine the impact of new skills on actual fat consumption.

  20. Construction and Validation of a Scale to Measure Maslow's Concept of Self-Actualization

    ERIC Educational Resources Information Center

    Jones, Kenneth Melvin; Randolph, Daniel Lee

    1978-01-01

    Designed to measure self-actualization as defined by Abraham Maslow, the Jones Self Actualizing Scale, as assessed in this study, possesses content validity, reliability, and a number of other positive characteristics. (JC)

  1. Long-Term Wind Power Variability

    SciTech Connect

    Wan, Y. H.

    2012-01-01

    The National Renewable Energy Laboratory started collecting wind power data from large commercial wind power plants (WPPs) in southwest Minnesota with dedicated dataloggers and communication links in the spring of 2000. Over the years, additional WPPs in other areas were added to and removed from the data collection effort. The longest data stream of actual wind plant output is more than 10 years. The resulting data have been used to analyze wind power fluctuations, frequency distribution of changes, the effects of spatial diversity, and wind power ancillary services. This report uses the multi-year wind power data to examine long-term wind power variability.

  2. TARDEC Overview: Ground Vehicle Power and Mobility

    DTIC Science & Technology

    2011-02-04

    IED Defeat Systems – New weapons • Energy security problematic – Increasing dependence on foreign oil – Alternative sources sought – wind, solar ...for soldier- wearable power • Increased emphasis on system power metrics (KPPs, low consumption components) The Challenges 0 20 40 60 80 100 120 1860

  3. Power-Aware Cognitive Packet Networks

    DTIC Science & Technology

    2005-04-01

    Power-Aware Cognitive Packet Networks Erol Gelenbe Dennis Gabor Chair Ricardo Lent Research Fellow Department of Electrical and Electronic...intelligent distribution of energy consumption in the network Power-Aware Cognitive Packet Networks Erol Gelenbe Dennis Gabor Chair Ricardo Lent

  4. Relationship between Burnout Syndrome Symptoms and Self-Actualization Scores in Critical-Care Nurses.

    DTIC Science & Technology

    1985-01-01

    opportunities, satisfactory supervision, and self-actualization. One study indicated that nursing education promotes self-actualization at least to... nursing education achieved in burnout syndrome symptoms? 8. Is there a difference by level of nursing education achieved in self-actualization...level of nursing education achieved in the burnout scores or the self-actualization scores. The exception was that the associate degree nurses scored

  5. Modulation of sweet preference by the actual and anticipated consequences of eating.

    PubMed

    Martin, Ashley A; Ferriday, Danielle; Rogers, Peter J; Brunstrom, Jeffrey M

    2016-12-01

    Previous research has shown that non-human animals exhibit an inverted-U pattern of sweet preference, with consumption increasing across moderate levels of sweetness and then declining for high levels of sweetness. In rodents, this pattern reflects an avoidance of the postingestive effects of consuming energy-dense sugar solutions (conditioned satiation). Here, we examined whether humans also adjust their preferences to compensate for the anticipated energy content/satiating outcomes of consuming sweetened foods. In two experiments (each N = 40), participants were asked to taste and imagine eating small (15 g) and large (250 g) portions of five novel desserts that varied in sweetness. Participants evaluated the desserts' expected satiety, expected satiation, and expected sickliness. A measure of estimated energy content was also derived using a computerized energy compensation test. This procedure was completed before and after consuming a standard lunch. Across both experiments, results confirmed that participants preferred a less sweet dessert when asked to imagine eating a large versus a small portion, and when rating the dessert in a fed versus fasted state. We also obtained evidence that participants anticipated more energy from the sweeter desserts (even in Experiment 2 when half of the participants were informed that the desserts were equated for energy content). However we found only partial evidence for anticipated satiation-expected sickliness was related systematically to increases in sweetness, but expected satiation and expected satiety were only weakly influenced. These findings raise questions about the role of sweetness in the control of food intake (in humans) and the degree to which 'sweet-calorie learning' occurs in complex dietary environments where sweetness may actually be a poor predictor of the energy content of foods.

  6. Power optimization in body sensor networks: the case of an autonomous wireless EMG sensor powered by PV-cells.

    PubMed

    Penders, J; Pop, V; Caballero, L; van de Molengraft, J; van Schaijk, R; Vullers, R; Van Hoof, C

    2010-01-01

    Recent advances in ultra-low-power circuits and energy harvesters are making self-powered body sensor nodes a reality. Power optimization at the system and application level is crucial in achieving ultra-low-power consumption for the entire system. This paper reviews system-level power optimization techniques, and illustrates their impact on the case of autonomous wireless EMG monitoring. The resulting prototype, an Autonomous wireless EMG sensor power by PV-cells, is presented.

  7. Impact of climatic factors on energy consumption during the heating season

    NASA Astrophysics Data System (ADS)

    Ginzburg, A. S.; Reshetar, O. A.; Belova, I. N.

    2016-09-01

    Global and regional climate changes produce a significant effect on energy production and consumption, especially on heating and air conditioning in residential, industrial, commercial, and office rooms. In Russia, with its contracting climate conditions, energy consumption varies a lot in different regions. Thus, we have to review the dynamics of energy consumption during the cold season individually for each region of the country. We analyzed the dynamics of duration and temperature of the heating season in Moscow region and completed a comparative study of heat energy consumption, actual and calculated based on the 'degreedays' concept, in the municipal economy of Moscow during the last decade. Based on the actual data analysis, we proved that conservation of energy resources in a large city relies not so much on a shortening of the heating period as on the growth of atmospheric air temperature in winter. The projected climate warming in the Moscow region in the nearest decades, along with measures of energy conservation, will promote a significant reduction in energy consumption of the municipal economy in winter. The results shown in this article were obtained in the process of preparing and implementing project no. 16-17-00114 by the Russian Science Foundation "Analysis of an impact of the regional climate change on the residential and commercial energy consumption of Russian megacities," within the main area of focus of the Russian Science Foundation, which is "Fundamental Research and Exploration in Main Topical Areas of Focus." The project was implemented within the framework of the scientific area of focus, which is "Reduction of the Risk and Mitigation of Consequences of Natural and Man-made Disasters" ("Studying Economical, Political, and Social Consequences of Global Climate Changes" problem).

  8. 25 CFR 39.201 - Does ISEF reflect the actual cost of school operations?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Does ISEF reflect the actual cost of school operations... Does ISEF reflect the actual cost of school operations? ISEF does not attempt to assess the actual cost of school operations either at the local school level or in the aggregate nationally. ISEF is...

  9. 25 CFR 39.101 - Does ISEF assess the actual cost of school operations?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Does ISEF assess the actual cost of school operations? 39... SCHOOL EQUALIZATION PROGRAM Indian School Equalization Formula § 39.101 Does ISEF assess the actual cost of school operations? No. ISEF does not attempt to assess the actual cost of school operations...

  10. Self-Actualization in a Marathon Growth Group: Do the Strong Get Stronger?

    ERIC Educational Resources Information Center

    Kimball, Ronald; Gelso, Charles J.

    This study examined the effects of a weekend marathon on the level of self-actualization of college students one and four weeks following their group experience. It also studied the relationship between ego strength and extent of change in self-actualization during a marathon. Generally, the group experience did increase self-actualization and the…

  11. 7 CFR 400.51 - Availability of actual production history program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Availability of actual production history program. 400.51 Section 400.51 Agriculture Regulations of the Department of Agriculture (Continued) FEDERAL CROP... History § 400.51 Availability of actual production history program. An Actual Production History...

  12. 7 CFR 400.51 - Availability of actual production history program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 6 2014-01-01 2014-01-01 false Availability of actual production history program. 400.51 Section 400.51 Agriculture Regulations of the Department of Agriculture (Continued) FEDERAL CROP... History § 400.51 Availability of actual production history program. An Actual Production History...

  13. 7 CFR 400.51 - Availability of actual production history program.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 6 2013-01-01 2013-01-01 false Availability of actual production history program. 400.51 Section 400.51 Agriculture Regulations of the Department of Agriculture (Continued) FEDERAL CROP... History § 400.51 Availability of actual production history program. An Actual Production History...

  14. On the downscaling of actual evapotranspiration maps based on combination of MODIS and landsat-based actual evapotranspiration estimates

    USGS Publications Warehouse

    Singh, Ramesh K.; Senay, Gabriel B.; Velpuri, Naga Manohar; Bohms, Stefanie; Verdin, James P.

    2014-01-01

     Downscaling is one of the important ways of utilizing the combined benefits of the high temporal resolution of Moderate Resolution Imaging Spectroradiometer (MODIS) images and fine spatial resolution of Landsat images. We have evaluated the output regression with intercept method and developed the Linear with Zero Intercept (LinZI) method for downscaling MODIS-based monthly actual evapotranspiration (AET) maps to the Landsat-scale monthly AET maps for the Colorado River Basin for 2010. We used the 8-day MODIS land surface temperature product (MOD11A2) and 328 cloud-free Landsat images for computing AET maps and downscaling. The regression with intercept method does have limitations in downscaling if the slope and intercept are computed over a large area. A good agreement was obtained between downscaled monthly AET using the LinZI method and the eddy covariance measurements from seven flux sites within the Colorado River Basin. The mean bias ranged from −16 mm (underestimation) to 22 mm (overestimation) per month, and the coefficient of determination varied from 0.52 to 0.88. Some discrepancies between measured and downscaled monthly AET at two flux sites were found to be due to the prevailing flux footprint. A reasonable comparison was also obtained between downscaled monthly AET using LinZI method and the gridded FLUXNET dataset. The downscaled monthly AET nicely captured the temporal variation in sampled land cover classes. The proposed LinZI method can be used at finer temporal resolution (such as 8 days) with further evaluation. The proposed downscaling method will be very useful in advancing the application of remotely sensed images in water resources planning and management.

  15. Short-Term Energy Outlook Model Documentation: Electricity Generation and Fuel Consumption Models

    EIA Publications

    2014-01-01

    The electricity generation and fuel consumption models of the Short-Term Energy Outlook (STEO) model provide forecasts of electricity generation from various types of energy sources and forecasts of the quantities of fossil fuels consumed for power generation. The structure of the electricity industry and the behavior of power generators varies between different areas of the United States. In order to capture these differences, the STEO electricity supply and fuel consumption models are designed to provide forecasts for the four primary Census regions.

  16. Neurobehavioral effects of aspartame consumption.

    PubMed

    Lindseth, Glenda N; Coolahan, Sonya E; Petros, Thomas V; Lindseth, Paul D

    2014-06-01

    Despite its widespread use, the artificial sweetener aspartame remains one of the most controversial food additives, due to mixed evidence on its neurobehavioral effects. Healthy adults who consumed a study-prepared high-aspartame diet (25 mg/kg body weight/day) for 8 days and a low-aspartame diet (10 mg/kg body weight/day) for 8 days, with a 2-week washout between the diets, were examined for within-subject differences in cognition, depression, mood, and headache. Measures included weight of foods consumed containing aspartame, mood and depression scales, and cognitive tests for working memory and spatial orientation. When consuming high-aspartame diets, participants had more irritable mood, exhibited more depression, and performed worse on spatial orientation tests. Aspartame consumption did not influence working memory. Given that the higher intake level tested here was well below the maximum acceptable daily intake level of 40-50 mg/kg body weight/day, careful consideration is warranted when consuming food products that may affect neurobehavioral health.

  17. Barriers to and Facilitators of the Consumption of Animal-Based Protein-Rich Foods in Older Adults

    PubMed Central

    Appleton, K. M.

    2016-01-01

    Protein intakes in the older population can be lower than recommended for good health, and while reasons for low protein intakes can be provided, little work has attempted to investigate these reasons in relation to actual intakes, and so identify those of likely greatest impact when designing interventions. Questionnaires assessing: usual consumption of meat, fish, eggs and dairy products; agreement/disagreement with reasons for the consumption/non-consumption of these foods; and several demographic and lifestyle characteristics; were sent to 1000 UK community-dwelling adults aged 65 years and over. In total, 351 returned questionnaires, representative of the UK older population for gender and age, were suitable for analysis. Different factors were important for consumption of the four food groups, but similarities were also found. These similarities likely reflect issues of particular concern to both the consumption of animal-based protein-rich foods and the consumption of these foods by older adults. Taken together, these findings suggest intakes to be explained by, and thus that strategies for increasing consumption should focus on: increasing liking/tastiness; improving convenience and the effort required for food preparation and consumption; minimizing spoilage and wastage; and improving perceptions of affordability or value for money; freshness; and the healthiness of protein-rich foods. PMID:27043615

  18. Calibrated energy simulations of potential energy savings in actual retail buildings

    NASA Astrophysics Data System (ADS)

    Alhafi, Zuhaira

    Retail stores are commercial buildings with high energy consumption due to their typically large volumes and long hours of operation. This dissertation assesses heating, ventilating and air conditioning saving strategies based on energy simulations with input parameters from actual retail buildings. The dissertation hypothesis is that "Retail store buildings will save a significant amount of energy by (1) modifying ventilation rates, and/or (2) resetting set point temperatures. These strategies have shown to be beneficial in previous studies. As presented in the literature review, potential energy savings ranged from 0.5% to 30% without compromising indoor thermal comfort and indoor air quality. The retail store buildings can be ventilated at rates significantly lower than rates called for in the ASHRAE Standard 62.1-2010 while maintaining acceptable indoor air quality. Therefore, two dissertation objectives are addressed: (1) Investigate opportunities to reduce ventilation rates that do not compromise indoor air quality in retail stores located in Central Pennsylvania, (2) Investigate opportunities to increase (in summer) and decrease (in winter) set point temperatures that do not compromise thermal comfort. This study conducted experimental measurements of ventilation rates required to maintain acceptable air quality and indoor environmental conditions requirements for two retail stores using ASHRAE Standard 62.1_2012. More specifically, among other parameters, occupancy density, indoor and outdoor pollutant concentrations, and indoor temperatures were measured continuously for one week interval. One of these retail stores were tested four times for a yearlong time period. Pollutants monitored were formaldehyde, carbon dioxide, particle size distributions and concentrations, as well as total volatile organic compounds. As a part of the base protocol, the number of occupants in each store was hourly counted during the test, and the results reveal that the occupant

  19. Food choice: the battle between package, taste and consumption situation.

    PubMed

    Gutjar, Swetlana; de Graaf, Cees; Palascha, Aikaterini; Jager, Gerry

    2014-09-01

    The present study compared how intrinsic (sensory) and extrinsic (packaging) product properties influence actual food choice in combination with the concept of product appropriateness in a specific consumption context. Food choice of seven test products was measured in three breakfast sessions within a simulated cafeteria setting with subsequent product consumption. Test products were five breakfast drinks and two dessert products considered as inappropriate for breakfast. One hundred and three participants took part in a blind taste session, after which they chose one out of the seven foods to consume for breakfast. In a second session (familiar package session), the same participants based their choice on the package of the seven foods they tasted in the first session. An additional group of 65 participants took part in a third naïve package session, where they chose just on the basis of package without being previously exposed to the foods. Results showed that food choices in the naïve package session were guided by the package that labelled the products as "breakfast product". Food choices in the blind session were strongly correlated (r = 0.8) with the liking of the products. Food choice in the "familiar package session" lay between the blind and naïve package session. It is concluded that food choice in a simulated cafeteria setting is guided by extrinsic (package) as well as intrinsic (sensory) properties and both can act as a cue for product appropriateness given a specific consumption context. Depending on the salience of either intrinsic or extrinsic properties during the choice moment their impact on choice is stronger.

  20. Electric power monthly, April 1993

    SciTech Connect

    Not Available

    1993-05-07

    The Electric Power Monthly is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the US, Census division, and State levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions.

  1. Electric power monthly, May 1993

    SciTech Connect

    Not Available

    1993-05-25

    The Electric Power Monthly (EPM) is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the US, Census division, and State levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions.

  2. Use of nanofiltration to reduce cooling tower water consumption.

    SciTech Connect

    Altman, Susan Jeanne; Ciferno, Jared

    2010-10-01

    Nanofiltration (NF) can effectively treat cooling-tower water to reduce water consumption and maximize water usage efficiency of thermoelectric power plants. A pilot is being run to verify theoretical calculations. A side stream of water from a 900 gpm cooling tower is being treated by NF with the permeate returning to the cooling tower and the concentrate being discharged. The membrane efficiency is as high as over 50%. Salt rejection ranges from 77-97% with higher rejection for divalent ions. The pilot has demonstrated a reduction of makeup water of almost 20% and a reduction of discharge of over 50%.

  3. World synthetic rubber consumption is growing

    SciTech Connect

    Not Available

    1987-03-04

    Worldwide consumption of new rubber, both synthetic and natural, has increased. This report includes a prediction of even more growth in the rubber market which was made by the International Institute of Synthetic Rubber Producers (IISRP), based in Houston. Figures are given for worldwide consumption.

  4. Lost in Transition? Student Food Consumption

    ERIC Educational Resources Information Center

    Blichfeldt, Bodil Stilling; Gram, Malene

    2013-01-01

    Findings from transition studies as well as studies of student food show that the transition from living at home to independent living influences student food consumption and that food consumption might be problematic during this period. Furthermore, both students' enactment of being in transition and the food habits and practices they bring with…

  5. Social Stratification and Consumption Patterns in Turkey

    ERIC Educational Resources Information Center

    Aydin, Kemal

    2006-01-01

    In this article, by analyzing consumption practices of Turkish households, I attempted to identify whether there are distinctions between different social classes in Turkey. Stated another way, I assessed and explored the impact of socio-economic forces on consumption patterns, taste and lifestyle. In doing so, I tested empirically, two…

  6. Modeling Addictive Consumption as an Infectious Disease.

    PubMed

    Alamar, Benjamin; Glantz, Stanton A

    2006-03-17

    The dominant model of addictive consumption in economics is the theory of rational addiction. The addict in this model chooses how much they are going to consume based upon their level of addiction (past consumption), the current benefits and all future costs. Several empirical studies of cigarette sales and price data have found a correlation between future prices and consumption and current consumption. These studies have argued that the correlation validates the rational addiction model and invalidates any model in which future consumption is not considered. An alternative to the rational addiction model is one in which addiction spreads through a population as if it were an infectious disease, as supported by the large body of empirical research of addictive behaviors. In this model an individual's probability of becoming addicted to a substance is linked to the behavior of their parents, friends and society. In the infectious disease model current consumption is based only on the level of addiction and current costs. Price and consumption data from a simulation of the infectious disease model showed a qualitative match to the results of the rational addiction model. The infectious disease model can explain all of the theoretical results of the rational addiction model with the addition of explaining initial consumption of the addictive good.

  7. Towards an Operational Monitoring of Actual Evapotranspiration With Modis Imagery

    NASA Astrophysics Data System (ADS)

    Timmermans, W.; Gieske, A.; Bastiaanssen, W.; Holtslag, B.; Wolski, P.; Arneth, A.; Wohland, P.

    2002-12-01

    as daily rates of ET. They are compared with ground-based energy flux measurements using a meteorological flux tower, situated at a homogeneous site in the savannah. The model returns estimates of sensible and soil heat fluxes that agree well with the tower measurements, but net radiation and latent heat flux show deviations. The net radiation is slightly low and mostly due to differences between modeled and actual albedo. Latent heat fluxes are overestimated by about 35 Wm-2, if compared to the eddy measurements. However, if the energy closure gap is due entirely to errors in the towers latent heat fluxes, which is done in the remote sensing approach, they are underestimated by about 30 Wm-2. In other words, further improvement of the model is hampered by possible errors in the validation data. Using this model output, a regional estimate of daily ET can be retrieved, assuming a constant daytime evaporative fraction. Typical values that emerge are 6 mm for the swamps, 2 for the grasslands and 1 mm for the savannah.

  8. Estimating pumping time and ground-water withdrawals using energy- consumption data

    USGS Publications Warehouse

    Hurr, R.T.; Litke, D.W.

    1989-01-01

    Evaluation of the hydrology of an aquifer requires knowledge about the volume of groundwater in storage and also about the volume of groundwater withdrawals. Totalizer flow meters may be installed at pumping plants to measure withdrawals; however, it generally is impractical to equip all pumping plants in an area with meters. A viable alternative is the use of rate-time methods. Rate-time methods may be used at individual pumping plants to decrease the data collection necessary for determining withdrawals. At sites where pumping-time measurement devices are not installed, pumping time may be determined on the basis of energy consumption and power demand. At pumping plants where energy consumption is metered, data acquired by reading of meters is used to estimate pumping time. Care needs to be taken to read these meters correctly. At pumping plants powered by electricity, the calculations need to be modified if transformers are present. At pumping plants powered by natural gas, the effects of the pressure-correction factor need to be included in the calculations. At pumping plants powered by gasoline, diesel oil, or liquid petroleum gas, the geometry of storage tanks needs to be analyzed as part of the calculations. The relation between power demand and pumping rate at a pumping plant can be described through the use of the power-consumption coefficient. Where equipment and hydrologic conditions are stable, this coefficient can be applied to total energy consumption at a site to estimate total groundwater withdrawals. Random sampling of power consumption coefficients can be used to estimate area-wide groundwater withdrawal. (USGS)

  9. Daidzin decreases ethanol consumption in rats.

    PubMed

    Heyman, G M; Keung, W M; Vallee, B L

    1996-09-01

    In a previous study, daidzin, a constituent of an ancient Chinese herbal treatment for alcoholism, decreased home-cage ethanol consumption in laboratory Syrian golden hamsters. The present study tested the generality of daidzin's antidipsotropic effects. Rats served as subjects in a two-lever choice procedure. At one lever, responses earned 10% ethanol, flavored with saccharin. At the other lever, responses earned an isocaloric starch solution. Daidzin decreased both ethanol and starch consumption, but the decreases in ethanol intake were larger. Changes in consumption were dose dependent, and differences in ethanol and food consumption increased slightly (but significantly) as dose increased. Daidzin produced a similar pattern of decreases in lever pressing. In baseline, there was an approximately equal distribution of responses between the two levers; at the highest daidzin dose, the relative number of responses at the ethanol lever decreased to 30%. These results replicate and extend earlier findings, and they encourage further research on daidzin's capacity to decrease ethanol consumption.

  10. Perceived and actual social discrimination: the case of overweight and social inclusion.

    PubMed

    Hartung, Freda-Marie; Renner, Britta

    2013-01-01

    The present study examined the correspondence between perceived and actual social discrimination of overweight people. In total, 77 first-year students provided self-ratings about their height, weight, and perceived social inclusion. To capture actual social inclusion, each participant nominated those fellow students (a) she/he likes and dislikes and (b) about whom she/he is likely to hear social news. Students with lower Body Mass Index (BMI) felt socially included, irrespective of their actual social inclusion. In contrast, students with higher BMI felt socially included depending on the degree of their actual social inclusion. Specifically, their felt social inclusion accurately reflected whether they were actually liked/disliked, but only when they were part of social news. When not part of social news, they also showed insensitivity to their actual social inclusion status. Thus, students with a lower BMI tended to be insensitive, while students with a higher BMI showed a differential sensitivity to actual social discrimination.

  11. Literature data may underestimate the actual antioxidant capacity of cereals.

    PubMed

    Pérez-Jiménez, Jara; Saura-Calixto, Fulgencio

    2005-06-15

    Several recent articles have reported a significant antioxidant capacity of cereal products, determined in methanolic and ethanolic extracts. The aim of this work was to conduct an assessment of the antioxidant capacity of cereals using both chemical and in vitro digestive enzymatic extraction of antioxidants. Ferric reducing power (FRAP) and free radical scavenging capacity (DPPH) methods were used to determine the antioxidant capacity in wheat flour, bread, raw and boiled rice, wheat bran, and oat bran. The most efficient antioxidant extraction was achieved by using successively acidic methanol/water (50:50 v/v, pH 2) and acetone/water (70:30 v/v). The antioxidant capacity in these extracts ranged from 1.1 to 4.4 micromol Trolox/g dw. A significant amount of hydrolyzable phenolics with a high antioxidant capacity (from 5 to 108 micromol Trolox/g dw) was found in the residues of this aqueous-organic extraction. The antioxidant capacities of these nonextractable polyphenols are usually ignored in the literature, although they may have an antioxidant role in the gastrointestinal tract, especially after colonic fermentation, and may be fermentated to active metabolites. On the other hand, in vitro digestive enzymatic extracts obtained by enzymatic treatments that mimic conditions in the gastrointestinal tract showed that the amount of antioxidants released by the cereal matrix into the human intestine may be higher than the one that can be expected from measurements in the usual aqueous-organic extracts.

  12. Adaptive Preheating Duration Control for Low-Power Ambient Air Quality Sensor Networks

    PubMed Central

    Baek, Yoonchul; Atiq, Mahin K.; Kim, Hyung Seok

    2014-01-01

    Ceramic gas sensors used for measuring ambient air quality have features suitable for practical applications such as healthcare and air quality management, but have a major drawback—large power consumption to preheat the sensor for accurate measurements. In this paper; the adaptive preheating duration control (APC) method is proposed to reduce the power consumption of ambient air quality sensor networks. APC reduces the duration of unnecessary preheating, thereby alleviating power consumption. Furthermore, the APC can allow systems to meet user requirements such as accuracy and periodicity factor when detecting the concentration of a target gas. A performance evaluation of the power consumption of gas sensors is conducted with various user requirements and factors that affect the preheating duration of the gas sensor. This shows that the power consumption of the APC is lower than that of continuous power supply methods and constant power supply/cutoff methods. PMID:24658619

  13. Adaptive preheating duration control for low-power ambient air quality sensor networks.

    PubMed

    Baek, Yoonchul; Atiq, Mahin K; Kim, Hyung Seok

    2014-03-20

    Ceramic gas sensors used for measuring ambient air quality have features suitable for practical applications such as healthcare and air quality management, but have a major drawback-large power consumption to preheat the sensor for accurate measurements. In this paper; the adaptive preheating duration control (APC) method is proposed to reduce the power consumption of ambient air quality sensor networks. APC reduces the duration of unnecessary preheating, thereby alleviating power consumption. Furthermore, the APC can allow systems to meet user requirements such as accuracy and periodicity factor when detecting the concentration of a target gas. A performance evaluation of the power consumption of gas sensors is conducted with various user requirements and factors that affect the preheating duration of the gas sensor. This shows that the power consumption of the APC is lower than that of continuous power supply methods and constant power supply/cutoff methods.

  14. Perceived and Actual Change in Religion/Spirituality in Cancer Survivors: Longitudinal Relationships With Distress and Perceived Growth.

    PubMed

    Trevino, Kelly M; Naik, Aanand D; Moye, Jennifer

    2016-08-01

    This observational cohort study examined the relationships between actual and perceived R/S change at 12 months post cancer diagnosis with depression, anxiety, and perceived growth 6 months later. Older adult military veteran cancer survivors (n = 111) completed self-report surveys at 6, 12, and 18 months post cancer diagnosis. Perceived R/S change was assessed at 12 months postdiagnosis with "Have your religious or spiritual beliefs changed as a result of your cancer" (more R/S, less R/S, other). Actual R/S change was assessed at 6 and 12 months postdiagnosis on a single item, "I have faith in God or a Higher Power" (no, somewhat, yes). A notable minority reported perceived (18.9%) and actual (14.4%) change. Greater perceived R/S change predicted more severe symptoms of depression and anxiety and greater perceived growth at 18 months postdiagnosis; perceived growth was positively associated with anxiety. Cancer survivors who report R/S changes may benefit from spiritual and/or psychological support.

  15. An Actual Design of AC Filter for Static Var Compensator and Verification Results from the Field Test

    NASA Astrophysics Data System (ADS)

    Tamura, Yuji; Takasaki, Shinji; Irokawa, Shoichi; Takeda, Hideo; Takagi, Kikuo; Noro, Yasuhiro; Ametani, Akihiro

    AC filter design method for SVC and HVDC is commonly known in the relevant CIGRE technical brochure and IEC technical report. However the conventional method requires many iterative calculations of the harmonic voltages and currents until the calculation results become within the regulation levels by changing filter parameters based on the experience. In this respect, a new improved design method is proposed, which enables efficient evaluation on the complex impedance plane to confirm as to whether the proposed filter impedance is in the permissible range. In an actual project of Okuura SVC of Kyusyu Electric Power Co., Inc., the new method was applied to the AC filter design. This paper describes on the actual procedure of the AC filter design with the new method, the actual references of the harmonic performance calculation, and the field test measurement results on Okuura SVC. The calculation results and the filed measurement results are consistent with each other, thus the validity of the new design method is verified on its accuracy and effectiveness.

  16. Investigation of Power Factor Controller Applications.

    DTIC Science & Technology

    1984-07-01

    16 V’. Auburn Report 16 Pacific Gas and Electric Study 25 San Diego Gas and Electric Study 34 Northern Natural Gas Study 42 6...application. San Diego Gas and Electric Study SDG&E’s testing was primarily to determine the effect the NASA PFC has on power consumption and power...Magdaluyo, and J. D. Huey, Three Phase Power Factor Controller Test (Internal Correspondence)(San Diego Gas and Electric Com- • .’-," pany, December 1981

  17. Western Australian students' alcohol consumption and expenditure intentions for Schoolies.

    PubMed

    Jongenelis, Michelle I; Pettigrew, Simone; Biagioni, Nicole; Hagger, Martin S

    2016-12-19

    In Australia, the immediate post-school period (known as 'Schoolies') is associated with heavy drinking and high levels of alcohol-related harm. This study investigated students' intended alcohol consumption during Schoolies to inform interventions to reduce alcohol-related harm among this group. An online survey was administered to students in their senior year of schooling. Included items related to intended daily alcohol consumption during Schoolies, amount of money intended to be spent on alcohol over the Schoolies period, and past drinking behaviour. On average, participants (n=187) anticipated that they would consume eight standard drinks per day, which is substantially higher than the recommended maximum of no more than four drinks on a single occasion. Participants intended to spend an average of A$131 on alcohol over the Schoolies period. Although higher than national guidelines, intended alcohol consumption was considerably lower than has been previously documented during Schoolies events. The substantial amounts of money expected to be spent during Schoolies suggest this group has adequate spending power to constitute an attractive target market for those offering alternative activities that are associated with lower levels of alcohol-related harm.

  18. A coupled remote sensing and the Surface Energy Balance based algorithms to estimate actual evapotranspiration over the western and southern regions of Saudi Arabia

    NASA Astrophysics Data System (ADS)

    Mahmoud, Shereif H.; Alazba, A. A.

    2016-07-01

    In countries with absolute water scarcity such as the Kingdom of Saudi Arabia (KSA), large-scale actual evapotranspiration estimation is of great concern in water use practices. Herein, spatial and temporal distribution of actual evapotranspiration (AET) in the western and southern regions of KSA during 1992-2014 was estimated using the SEBAL model with field observations. Zonal statistics for each land use-cover type were also identified, in order to understand their effects on water consumption. In addition, daily and seasonal water consumption for major crops was computed. Results revealed a gradual increase in monthly AET values from January to April and subsequent decline from May to December. The maximum monthly AET values were observed for irrigated cropland in southwestern, central, and southeastern regions of Asir Province, central and southwestern regions of Al-Baha Province, central and the plains region of Jazan Province, southern portion of Makkah Province, and limited areas in the northern regions of Madinah Province. The annual AET ranged from 418.8 to 3442.3 mm yr-1. The normal distribution of mean annual AET values ranged from 717 to 1020 mm yr-1. Forty-two percent of the study area had an annual AET that ranged from 717 to 1020 mm yr-1. The second highest range of frequencies was concentrated around 1020-1322 mm yr-1, representing the majority of agricultural land. The consumptive water use of the different land cover types in study area indicated that irrigated cropland which occupied 14.6% of the study area had AET rates much higher than other land uses. Water bodies are the next highest, with forest and shrubland and sparse vegetation slightly lower, and very low AET rates from bare soil. Daily and seasonal water consumption of major cropping systems varied spatially depending on cropping practices and climatic conditions.

  19. In situ experimental study of carbon monoxide generation by gasoline-powered electric generator in an enclosed space.

    PubMed

    Wang, Liangzhu; Emmerich, Steven J; Persily, Andrew K

    2010-12-01

    On the basis of currently available data, approximately 97% of generator-related carbon monoxide (CO) fatalities are caused by operating currently marketed, carbureted spark-ignited gasoline-powered generators (not equipped with emission controls) in enclosed spaces. To better understand and to reduce the occurrence of these fatalities, research is needed to quantify CO generation rates, develop and test CO emission control devices, and evaluate CO transport and exposure when operating a generator in an enclosed space. As a first step in these efforts, this paper presents measured CO generation rates from a generator without any emission control devices operating in an enclosed space under real weather conditions. This study expands on previously published information from the U.S. Consumer Product Safety Commission. Thirteen separate tests were conducted under different weather conditions at half and full generator load settings. It was found that the CO level in the shed reached a maximum value of 29,300 +/- 580 mg/m3, whereas the oxygen (O2) was depleted to a minimum level of 16.2 +/- 0.02% by volume. For the test conditions of real weather and generator operation, the CO generation and the O2 consumption could be expressed as time-averaged generation/consumption rates. It was also found that the CO generation and O2 consumption rates can be correlated to the O2 levels in the space and the actual load output from the generator. These correlations are shown to agree well with the measurements.

  20. Power for sensors; sensors for power

    NASA Astrophysics Data System (ADS)

    Siegel, Mel

    2016-10-01

    As sensors are increasingly deployed in locations removed from mains power and increasingly expected to operate for times that are long compared to battery lifetimes we look to means for "harvesting" or "scavenging" energy from the sensors' operating environments. Whereas many sensors are "parametric" - their interaction with the environment causes a change in one or more of their electrical parameters - many other are true transducers - they perform their sensing function by extracting energy from their environment. These kinds of sensors can thus serve - under suitable operating conditions - both as measuring devices and as power supplies. In this paper we review this background, review the fundamental restrictions on our ability to extract energy from the environment, enumerate and summarize sensing principles that are promising candidates to double as power supplies, and provide several examples that span the range from already off-the-shelf at low cost to in laboratory prototype stage to sufficiently speculative that there might be reasonable doubt regarding whether they can actually work even in principle. Possibilities examined across this spectrum include thermal noise, ambient RF scavenging (briefly), thermoelectricity, piezoelectricity, pyroelectricity, and electrochemistry, especially including electrochemistry facilitated by microorganisms.