Science.gov

Sample records for actual tooth flank

  1. Improvement of the oblique-incidence optical interferometric system to measure tooth flanks of involute helical gears.

    PubMed

    Fang, Suping; Wang, Leijie; Yang, Pengcheng; Meng, Lei; Komori, Masaharu; Kubo, Aizoh

    2011-04-01

    We put forward a plan of improving the oblique-incidence optical interferometric system applied in the measurement of tooth flanks of an involute spur gear in order to expand its capability to measure an involute helical gear. On the basis of the features of an involute helical tooth flank, we discuss how to realize the parallelism between the optical axis of the object arm of the optical system and the straight lines constructing the involute helical tooth flank. This parallelism helps the optical system produce an interference fringe pattern as clear as the one of an involute spur gear [Appl. Opt.49, 6409 (2010).]. A numerical simulation is then performed to examine the correctness of the improvement. During simulating, we unify the equation of difference tooth flanks by means of importing two parameters in relation to the left or right side of a tooth flank and the helical direction of teeth, respectively. Finally, the actual experiment is fulfilled through the real optical system built on an optical table. The simulation and experiment results verify the correctness and feasibility of the proposed improvement.

  2. Simulation method for interference fringe patterns in measuring gear tooth flanks by laser interferometry.

    PubMed

    Fang, Suping; Wang, Leijie; Komori, Masaharu; Kubo, Aizoh

    2010-11-20

    We present a ray-tracing-based method for simulation of interference fringe patterns (IFPs) for measuring gear tooth flanks with a two-path interferometer. This simulation method involves two steps. In the first step, the profile of an IFP is achieved by means of ray tracing within the object path of the interferometer. In the second step, the profile of an IFP is filled with interference fringes, according to a set of functions from an optical path length to a fringe gray level. To examine the correctness of this simulation method, simulations are performed for two spur involute gears, and the simulated IFPs are verified by experiments using the actual two-path interferometer built on an optical platform.

  3. Flank pain

    MedlinePlus

    Pain - side; Side pain ... Flank pain can be a sign of a kidney problem. But, since many organs are in this area, other causes are possible. If you have flank pain and fever , chills, blood in the urine, or ...

  4. Flank solar wind interaction

    NASA Technical Reports Server (NTRS)

    Moses, Stewart L.; Greenstadt, Eugene W.

    1992-01-01

    This report summarizes the results of the first 12 months of our program to study the interaction of the Earth's magnetosphere with the solar wind on the far flanks of the bow shock. This study employs data from the ISEE-3 spacecraft during its traversals of the Earth's magnetotail and correlative data from spacecraft monitoring the solar wind upstream. Our main effort to date has involved assembling data sets and developing new plotting programs. Two talks were given at the Spring Meeting of the American Geophysical Union describing our initial results from analyzing data from the far flank foreshock and magnetosheath. The following sections summarize our results.

  5. Tooth Decay

    MedlinePlus

    You call it a cavity. Your dentist calls it tooth decay or dental caries. They're all names for a hole in your tooth. The cause of tooth decay is plaque, a sticky substance in your mouth made up mostly of germs. Tooth decay starts in the outer layer, called the enamel. Without ...

  6. Flank solar wind interaction

    NASA Technical Reports Server (NTRS)

    Moses, Stewart L.; Greenstadt, Eugene W.; Coroniti, Ferdinand V.

    1994-01-01

    In this report we will summarize the results of the work performed under the 'Flank Solar Wind Interaction' investigation in support of NASA's Space Physics Guest Investigator Program. While this investigation was focused on the interaction of the Earth's magnetosphere with the solar wind as observed by instruments on the International Sun-Earth Explorer (ISEE) 3 spacecraft, it also represents the culmination of decades of research performed by scientists at TRW on the rich phenomenology of collisionless shocks in space.

  7. Influence of tooth profile on the noncircular gear tooth contact

    NASA Astrophysics Data System (ADS)

    Cristescu, A.; Andrei, L.; Cristescu, B.

    2017-02-01

    With noncircular gears, the continuous modification of the tooth meshing, in terms of variation of the tooth profiles and the line of action position and inclination, makes difficult the implementation of a general standard procedure for the analysis of the noncircular gears tooth contact. In this paper, the authors present a graphical approach that enables the tooth contact static pattern to be produced and evaluated in case of a noncircular gear with complex geometry of the pitch curve. The study is virtually developed, in AutoCAD environment, by animating and investigating the gear solid models in mesh. The tooth static contact analysis enables the path of contact area and distribution to be evaluated in correlation with the following variable initial data: gear pitch curve geometry, tooth profile geometry, as a consequence of different generating procedures, and the gear pressure angle. It was found out that the noncircular gear tooth contact could be improved by choosing different procedures for the tooth flank generation in concave and convex zones and by increasing the gear pressure angle.

  8. Tooth anatomy

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002214.htm Tooth anatomy To use the sharing features on this page, ... upper jawbone is called the maxilla. Images Tooth anatomy References Lingen MW. Head and neck. In: Kumar ...

  9. Tooth Problems

    MedlinePlus

    ... saved.Start OverDiagnosisYour pain may be from a FRACTURED, CRACKED or LOOSE TOOTH.Self CareSave any pieces of the tooth, wrap ... OverDiagnosisYour pain may be from TEMPOROMANDIBULAR JOINT (TMJ) syndrome, a condition that affects the jaw.Self CareTry ...

  10. West Flank Downhole Temperature Data

    DOE Data Explorer

    Doug Blankenship

    2008-03-01

    Downhole temperature data for the three wells inside the West Flank FORGE footprint; 83-11, TCH 74-2 and TCH 48-11. TCH 74-2 and TCH 48-11 were both collected before 1990 and 83-11 was collected in 2009. The are compiled into one spreadsheet for ease of visualization.

  11. Heat Shield Flank Close Up

    NASA Technical Reports Server (NTRS)

    2005-01-01

    This image from NASA's Mars Exploration Rover Opportunity features an up-close view of the flank piece of the rover's broken heat shield.

    The rover spent 36 sols investigating how the severe heating during entry through the atmosphere affected the heat shield. The most obvious is the fact that the heat shield inverted upon impact. Overall, engineers were interested in evaluating the performance of the heat shield's thermal protection system.

    This is the the panormamic camera team's best current attempt at generating a 'true color' view of what this scene would look like if viewed by a human on Mars. It was generated from a mathematical combination of six calibrated, left-eye panoramic camera images acquired around 3:07 p.m. local solar time on Opportunity's sol 331 (Dec. 28, 2004) using filters ranging in wavelengths from 430 to 750 nanometers.

  12. The study of double flank micro gear roll testing

    NASA Astrophysics Data System (ADS)

    Liu, Yen-Chih; An, Nai-Chun; Yang, Shu-Han; Yan, Sheng-Zhan; Chen, Shih-Lu

    2011-12-01

    The recent fast development of multifunctional portable electronic devices results in the obvious requirement of micro mechanical components. Due to the popular application of the micro actuators and the micro gearboxes, micro gears become the frequently used micro mechanical component in a small device such as small intelligent robots or dental surgical devices. Metal Industries Research & Development Centre (MIRDC) has successfully developed a small speed reducer that comprises several micro planetary gear trains. The module of this micro planetary gear train is 0.12mm. Since all gears are small, no commercial instrument is available for inspection. How to evaluate the manufacturing quality of micro gears becomes an important issue. This study focuses on the double flank gear rolling test and a specialized apparatus is built referring to the testing requirements in the international standards. The center distance variation during the rolling test is recorded and two indices, the total radial composite deviation and the maximum tooth-to-tooth radial composite deviation, are calculated to evaluate the accuracy grade of the micro gears. Experimental results show that the accuracy of the micro gear made by the cold forging process conforms to grade 7 defined in the ISO 1328-2 while grade 2 is achieved if the JGMA 116-02 is specified.

  13. Tooth - abnormal colors

    MedlinePlus

    ... medlineplus.gov/ency/article/003065.htm Tooth - abnormal colors To use the sharing features on this page, please enable JavaScript. Abnormal tooth color is any color other than white to yellowish- ...

  14. Tooth sensitivity and whitening.

    PubMed

    Swift, Edward J

    2005-09-01

    This article presents a review of the basic concepts of tooth sensitivity and how those concepts apply to cervical dentin hypersensitivity and the sensitivity frequently associated with tooth whitening. The etiology and treatment of cervical dentin hypersensitivity are described. The clinical presentation, incidence, and predisposing factors for sensitivity associated with tooth whitening also are discussed.

  15. Quantitative Evaluation of Strain Near Tooth Fillet by Image Processing

    NASA Astrophysics Data System (ADS)

    Masuyama, Tomoya; Yoshiizumi, Satoshi; Inoue, Katsumi

    The accurate measurement of strain and stress in a tooth is important for the reliable evaluation of the strength or life of gears. In this research, a strain measurement method which is based on image processing is applied to the analysis of strain near the tooth fillet. The loaded tooth is photographed using a CCD camera and stored as a digital image. The displacement of the point in the tooth flank is tracked by the cross-correlation method, and then, the strain is calculated. The interrogation window size of the correlation method and the overlap amount affect the accuracy and resolution. In the case of measurements at structures with complicated profiles such as fillets, the interrogation window maintains a large size and the overlap amount should be large. The surface condition also affects the accuracy. The white painted surface with a small black particle is suitable for measurement.

  16. Efficacy of Nonthermal Atmospheric Pressure Plasma for Tooth Bleaching

    PubMed Central

    Nam, Seoul Hee; Lee, Hae June; Hong, Jin Woo; Kim, Gyoo Cheon

    2015-01-01

    The conventional light source used for tooth bleaching has the potential to cause thermal damage, and the actual role of the light source is doubtful. In this study, we evaluated bleaching efficacy, temperature, and morphological safety after tooth bleaching with nonthermal atmospheric pressure plasma. Tooth bleaching combined with plasma had improved efficacy in providing a higher level of brightness. The temperature of the pulp chamber was maintained around 37°C, indicating that the plasma does not cause any thermal damage. The morphological results of tooth bleaching with plasma did not affect mineral composition under scanning electron microscopy (SEM) observations. On the basis of these results, the application of plasma and low concentration of 15% carbamide peroxide (CP) has a high capability for effective tooth bleaching. It can be documented that plasma is a safe energe source, which has no deleterious effects on the tooth surface. PMID:25685843

  17. Cracked tooth syndrome: Overview of literature

    PubMed Central

    Hasan, Shamimul; Singh, Kuldeep; Salati, Naseer

    2015-01-01

    Pain is defined as an “unpleasant sensory and emotional feeling which is associated with actual or potential injury of tissue or expressed in terms of such injury.” Tooth pain usually refers to pain around the teeth or jaws mainly as a result of a dental condition. Mostly, toothaches are caused by a carious cavity, a broken tooth, an exposed tooth root or gum disease. The toothache may sometimes be the result of radiating pain from structures in the vicinity of tooth and jaws (cardiac pain, ear, nose, throat pain, and sinusitis). Therefore, evaluation by both dentists and physicians are sometimes necessary to diagnose medical illnesses causing “toothache.” Cracked tooth syndrome is a major diagnostic challenge in clinical practice. Accurate diagnosis and appropriate treatment are complicated due to lack of awareness of this condition and its bizarre clinical features. Early diagnosis has been linked with successful restorative management and good prognosis. This article provides a detailed literature on the causes, classification, signs and symptoms, diagnosis, and treatment planning of cracked tooth syndrome. PMID:26539363

  18. The Submarine Flanks of Anatahan Volcano

    NASA Astrophysics Data System (ADS)

    Chadwick, W. W.; Embley, R. W.; Johnson, P. D.; Merle, S. G.; Ristau, S.

    2003-12-01

    The submarine flanks of Anatahan volcano were surveyed with EM300 multibeam sonar and the MR1 sidescan sonar from the R/V Thomas G. Thompson in February 2003. This was part of a larger survey of over 50 submarine volcanoes within the Marianas volcanic arc between 13° 10'N and 23° 10'N (see Embley et al. and Baker et al. abstracts, this meeting). This work was part of a multi-year study of seafloor volcanism in diverse tectonic settings, funded by NOAA's Office of Ocean Exploration. (see: http://oceanexplorer.noaa.gov/explorations/03fire/). The island of Anatahan has a maximum elevation of 798 m, but its submarine flanks descend to depths of 2000-2600 m, so most of the volcano lies below sea level. The submarine part of the volcano is elongated in the east-west direction, like the island. Conspicuous in the bathymetry are numerous small parasitic cones and hummocky ridges on the southwest and east submarine flanks of the island that radiate outward (downslope) from the island. These features appear as areas of high reflectivity in the MR1 sidescan sonar and some have distinctly lobate outlines, suggesting that they are areas of relatively young lava flows. Some of these lava flows extend up to 15 km from the coastline of the island and to depths below 2000 m. The upslope sources of these lavas are often ambiguous, but we interpret that they were erupted underwater (as opposed to erupted on land and then flowing into the ocean) because they are associated with cones and ridges that may be vent areas. The other flanks of the island appear to be draped in volcaniclastic material that has been transported downslope from the shoreline, in some cases as distinct flows that radiate outward in braided channels that have slightly higher reflectivity than surrounding areas in the sidescan imagery. These fragmental flows also extend to depths below 2000 m, especially on the west and south flanks of the island. The most prominent feature in the bathymetry around Anatahan is a

  19. Characteristics of the flank magnetopause: Cluster observations

    NASA Astrophysics Data System (ADS)

    Haaland, S.; Reistad, J.; Tenfjord, P.; Gjerloev, J.; Maes, L.; DeKeyser, J.; Maggiolo, R.; Anekallu, C.; Dorville, N.

    2014-11-01

    The magnetopause is a current sheet forming the boundary between the geomagnetic field on one side and the shocked solar wind on the other side. This paper discusses properties of the low-latitude dawn and dusk flanks of the magnetopause. The reported results are based on a large number of measurements obtained by the Cluster satellites during magnetopause traversals. Using a combination of single-spacecraft and multispacecraft techniques, we calculated macroscopic features such as thickness, location, and motion of the magnetopause. The results show that the typical flank magnetopause is significantly thicker than the dayside magnetopause and also possesses a pronounced and persistent dawn-dusk asymmetry. Thicknesses vary from 150 to 5000 km, with an median thickness of around 1400 km at dawn and around 1150 km at dusk. Current densities are on average higher on dusk, suggesting that the total current at dawn and dusk are similar. Solar wind conditions and the interplanetary magnetic field cannot fully explain the observed dawn-dusk asymmetry. For a number of crossings we were also able to derive detailed current density profiles. The profiles show that the magnetopause often consists of two or more adjacent current sheets, each current sheet typically several ion gyroradii thick and often with different current direction. This demonstrates that the flank magnetopause has a structure that is more complex than the thin, one-dimensional current sheet described by a Chapman-Ferraro layer.

  20. Decellularized Tooth Bud Scaffolds for Tooth Regeneration.

    PubMed

    Zhang, W; Vazquez, B; Oreadi, D; Yelick, P C

    2017-01-01

    Whole tooth regeneration approaches currently are limited by our inability to bioengineer full-sized, living replacement teeth. Recently, decellularized organ scaffolds have shown promise for applications in regenerative medicine by providing a natural extracellular matrix environment that promotes cell attachment and tissue-specific differentiation leading to full-sized organ regeneration. We hypothesize that decellularized tooth buds (dTBs) created from unerupted porcine tooth buds (TBs) can be used to guide reseeded dental cell differentiation to form whole bioengineered teeth, thereby providing a potential off-the-shelf scaffold for whole tooth regeneration. Porcine TBs were harvested from discarded 6-mo-old pig jaws, and decellularized by successive sodium dodecyl sulfate/Triton-X cycles. Four types of replicate implants were used in this study: 1) acellular dTBs; 2) recellularized dTBs seeded with porcine dental epithelial cells, human dental pulp cells, and human umbilical vein endothelial cells (recell-dTBs); 3) dTBs seeded with bone morphogenetic protein (BMP)-2 (dTB-BMPs); and 4) freshly isolated nondecellularized natural TBs (nTBs). Replicate samples were implanted into the mandibles of host Yucatan mini-pigs and grown for 3 or 6 mo. Harvested mandibles with implanted TB constructs were fixed in formalin, decalcified, embedded in paraffin, sectioned, and analyzed via histological methods. Micro-computed tomography (CT) analysis was performed on harvested 6-mo samples prior to decalcification. All harvested constructs exhibited a high degree of cellularity. Significant production of organized dentin and enamel-like tissues was observed in dTB-recell and nTB implants, but not in dTB or dTB-BMP implants. Micro-CT analyses of 6-mo implants showed the formation of organized, bioengineered teeth of comparable size to natural teeth. To our knowledge, these results are the first to describe the potential use of dTBs for functional whole tooth regeneration.

  1. Vital tooth whitening.

    PubMed

    Kihn, Patricia W

    2007-04-01

    Vital tooth whitening, when administered correctly, is by all accounts one of the safest, most conservative, least expensive, and most effective aesthetic procedures currently available to patients. This article traces the evolution of the technology, describes what is known about the mechanism of action and explores such issues as toxicology and side effects associated with tooth whitening. The article also describes the various tooth-whitening systems, which include dentist-supervised night-guard bleaching, in-office or power bleaching, and bleaching with over-the-counter bleaching products. Combination treatments and light-activated treatments are also discussed. Finally, the article summarizes the areas of research needed in this field.

  2. Cavities/Tooth Decay

    MedlinePlus

    ... of various materials, such as tooth-colored composite resins, porcelain or combinations of several materials. Silver amalgam ... fit. Crowns may be made of gold, porcelain, resin, porcelain fused to metal or other materials. Root ...

  3. Replacing a Missing Tooth

    MedlinePlus

    ... This may be accomplished by adding plastic or porcelain filling material or a porcelain crown to reshape its appearance. What options are ... there is no danger of nerve involvement. A porcelain replacement tooth is held in place by metal ...

  4. To Tell the Tooth

    MedlinePlus

    ... Oral Health Made Easy Sesame Street Activity Sheets + Games and Quizzes Visit the Dentist with Marty To ... Resources Smile Smarts Dental Health Curriculum MouthHealthy Kids > Games and Quizzes > To Tell the Tooth To Tell ...

  5. The cracked tooth.

    PubMed

    Zuckerman, G R

    1998-01-01

    Fractured molars and premolars are very common. Fractures usually result from cracks that develop and slowly extend until the tooth separates into buccal and lingual fragments. Sometimes, as these cracks expand, the patient exhibits symptoms of what is commonly referred to as "cracked tooth syndrome" (CTS). When CTS occurs, an opportunity exists to diagnose and treat these patients, to relieve their discomfort and prevent sequelae that would require more extensive treatment.

  6. West Flank Coso, CA FORGE Seismic Reflection

    SciTech Connect

    Doug Blankenship

    2016-05-16

    PDFs of seismic reflection profiles 101,110, 111 local to the West Flank FORGE site. 45 line kilometers of seismic reflection data are processed data collected in 2001 through the use of vibroseis trucks. The initial analysis and interpretation of these data was performed by Unruh et al. (2001). Optim processed these data by inverting the P-wave first arrivals to create a 2-D velocity structure. Kirchhoff images were then created for each line using velocity tomograms (Unruh et al., 2001).

  7. Composition measurements in the dusk flank magnetosphere

    NASA Astrophysics Data System (ADS)

    Fuselier, S. A.; Elphic, R. C.; Gosling, J. T.

    1999-03-01

    The dusk flank magnetosphere exhibits significant structure. Several regions have been identified, including the plasma sheet, mantle, and low latitude boundary layer. Transitions from one region to the next, for example from the mantle to the plasma sheet, can be abrupt or indistinct. In addition, the density within the flank mantle can range over several orders of magnitude. Although there is significant structure in this region of the magnetosphere, individual regions often can be distinguished by their energy spectra and ion composition. ISEE Fast Plasma Experiment and Plasma Composition Experiment data are used to examine the composition of the mantle and to study a set of transitions from the mantle to the plasma sheet where plasmas with mantle-like and plasma sheet-like energies mix. This study indicates that the variability of the mantle density is largely due to variability in the solar wind component (H+ and He2+); the ionospheric plasma (O+) density is roughly constant. Similarly, the plasma with mantle-like energy found in the mixed region is largely of solar wind origin.

  8. West Flank Coso, CA FORGE Magnetotelluric Inversion

    DOE Data Explorer

    Doug Blankenship

    2016-05-16

    The Coso Magnetotelluric (MT) dataset of which the West Flank FORGE MT data is a subset, was collected by Schlumberger / WesternGeco and initially processed by the WesternGeco GeoSolutions Integrated EM Center of Excellence in Milan, Italy. The 2011 data was based on 99 soundings that were centered on the West Flank geothermal prospect. The new soundings along with previous data from 2003 and 2006 were incorporated into a 3D inversion. Full impedance tensor data were inverted in the 1-3000 Hz range. The modelling report notes several noise sources, specifically the DC powerline that is 20,000 feet west of the survey area, and may have affected data in the 0.02 to 10 Hz range. Model cell dimensions of 450 x 450 x 65 feet were used to avoid computational instability in the 3D model. The fit between calculated and observed MT values for the final model run had an RMS value of 1.807. The included figure from the WesternGeco report shows the sounding locations from the 2011, 2006 and 2003 surveys.

  9. Stabilization of volcanic flanks by dike intrusion: An example from Kilauea

    USGS Publications Warehouse

    Delaney, P.T.; Denlinger, R.P.

    1999-01-01

    Dike propagation and dilation increases the compression of adjacent rocks. On volcanoes, especially oceanic shields, dikes are accordingly thought to be structurally destabilizing. As compression is incremented, volcanic flanks are driven outward or downslope and thus increase their susceptibility to destructive earthquakes and giant landslides. We show, however, that the 2-m-thick dike emplaced along the east rift zone of Kilauea in 1983 actually stabilized that volcano's flank. Specifically, production of flank earthquakes dropped more than twofold after 1983 as maximum downslope motion slowed to 6 cm ?? year-1 from approximately 40 cm ?? year-1 during 1980-1982. As much as 65 cm of deflationary subsidence above Kilauea's summit and upper rift zones accompanied the dike intrusion. According to recent estimates, this deflation corresponds to a reduction in magma-reservoir pressure of approximately 4 MPa, probably about as much as the driving pressure of the 1983 dike. The volume of the dike, approximately 0.10-0.15 km3, is orders of magnitude less than the estimated 200- to 250-km3 volume of Kilauea's reservoir of magma and nearby hot, mushy rock. Thus, deflation of that reservoir reduces the compressional load on the flank over a much larger area than intrusion of the dike adds to it, particularly at the dominant depth of seismicity, 8-9 km. A Coulomb block model for flank motion during intervals between major earthquakes requires the low-angle fault beneath Kilauea's flank to exhibit slip weakening, conducive to earthquake instability. Accordingly, the triggering mechanism of destructive earthquakes, several of which have struck Hawaii during the past 150 years, need not require stresses accumulated by dike intrusions.

  10. Tsunami deposits at high altitudes on the flanks of volcanic islands

    NASA Astrophysics Data System (ADS)

    Paris, Raphael

    2016-04-01

    It is actually difficult to infer the mechanisms and dynamics of giant mass failures of oceanic shield volcanoes and to evaluate related tsunami hazards. Marine conglomerates and gravels found at unusually high elevations in Hawaii, Cape Verde, Mauritius and Canary Islands are often interpreted as being the result of tsunami waves generated by such massive flank failures. In the first part of this contribution, we document tsunami deposits (marine gravels with pumices) attached to the northwestern slopes of Tenerife, Canary Islands, at altitudes up to 132 m asl. Stratigraphy of the deposits and composition of the pumices allows identifying sources of the successive tsunamis and proposing a new scenario for the Icod flank failure and El Abrigo caldera-forming eruption ca. 170 ka. Then we propose a litterature review of tsunami deposits at high altitudes on the flanks of volcanic islands, and especially oceanic shield volcanoes. These deposits are discussed in terms of texture, structure, composition and particularly the juvenile volcanic material, and implications for better understanding the mechanisms controlling massive flank failures.

  11. Immediate total tooth replacement.

    PubMed

    Garber, D A; Salama, M A; Salama, H

    2001-03-01

    Successful implant placement at the time of extraction has been documented. Implant placement at the time of extraction was initially performed as a two-stage procedure often with barrier membranes and sophisticated second-stage surgical uncoverings. The authors describe the next generation of this technique, including atraumatic tooth removal with simultaneous root form, implant placement, and temporization at one appointment. This technique of "Immediate Total Tooth Replacement" allows for the maintenance of the bony housing and soft-tissue form that existed before extraction, while at the same time establishing a root form anchor in the bone for an esthetic restoration.

  12. Acoustic tooth cleaner

    NASA Technical Reports Server (NTRS)

    Heyman, J. S. (Inventor)

    1982-01-01

    An acoustic oral hygiene unit is described that uses acoustic energy to oscillate mild abrasive particles in a water suspension which is then directed in a low pressure stream onto the teeth. The oscillating abrasives scrub the teeth clean removing food particles, plaque, calculous, and other foreign material from tooth surfaces, interproximal areas, and tooth-gingiva interface more effectively than any previous technique. The relatively low power output and the basic design makes the invention safe and convenient for everyday use in the home without special training. This invention replaces all former means of home dental prophylaxis, and requires no augmentation to fulfill all requirements for daily oral hygienic care.

  13. The supernumerary nasal tooth.

    PubMed

    Kirmeier, R; Truschnegg, A; Payer, M; Malyk, J; Daghighi, S; Jakse, N

    2009-11-01

    Teeth exceeding the normal dental complement that have erupted into the nasal cavity are a rare pathological entity. This case report describes a female patient with recurrent complaints and fetid discharge from the left nasal cavity. The suspected clinical diagnosis of a supernumerary nasal tooth was confirmed by computed tomography. After endoscopic removal, the tooth was examined using X-ray microtomography and thin-section preparations; these findings are presented for the first time. A literature search identified 25 supernumerary nasal teeth in 23 patients.

  14. Single tooth bite forces in healthy young adults.

    PubMed

    Ferrario, V F; Sforza, C; Serrao, G; Dellavia, C; Tartaglia, G M

    2004-01-01

    The assessment of bite forces on healthy single tooth appears essential for a correct quantification of the actual impact of single implant oral rehabilitations. In the present study, a new single tooth strain-gauge bite transducer was used in 52 healthy young adults (36 men, 16 women) with a complete permanent dentition. The influences of tooth position along the dental arch, of side, and of sex, on maximum bite force were assessed by an ANOVA. No significant left-right differences were found. On average, in both sexes the lowest bite force was recorded on the incisors (40-48% of maximum single tooth bite force), the largest force was recorded on the first molar. Bite forces were larger in men than in women (P < 0.002), and increased monotonically along the arch until the first or second permanent molar (P < 0.0001). The present data can be used as reference values for the comparison of dental forces in patients.

  15. Rapid deformation of the South flank of kilauea volcano, hawaii.

    PubMed

    Owen, S; Segall, P; Freymueller, J; Mikijus, A; Denlinger, R; Arnadóttir, T; Sako, M; Bürgmann, R

    1995-03-03

    The south flank of Kilauea volcano has experienced two large [magnitude (M) 7.2 and M 6.1] earthquakes in the past two decades. Global Positioning System measurements conducted between 1990 and 1993 reveal seaward displacements of Kilauea's central south flank at rates of up to about 10 centimeters per year. In contrast, the northern side of the volcano and the distal ends of the south flank did not displace significantly. The observations can be explained by slip on a low-angle fault beneath the south flank combined with dilation deep within Kilauea's rift system, both at rates of at least 15 centimeters per year.

  16. Pneumomediastinum after Tooth Extraction

    PubMed Central

    Ocakcioglu, Ilhan; Koyuncu, Serhat; Kupeli, Mustafa; Bol, Oguzhan

    2016-01-01

    Pneumomediastinum is defined as the presence of air in mediastinum. Pneumomediastinum can sometimes occur after surgery. Pneumomediastinum seen after dental procedures is rare. We presented the case of subcutaneous emphysema developed in the neck and upper chest after tooth extraction and discussed the possible mechanisms of pneumomediastinum. PMID:26989552

  17. The Rachitic Tooth

    PubMed Central

    Nociti, Francisco H.; Somerman, Martha J.

    2014-01-01

    Teeth are mineralized organs composed of three unique hard tissues, enamel, dentin, and cementum, and supported by the surrounding alveolar bone. Although odontogenesis differs from osteogenesis in several respects, tooth mineralization is susceptible to similar developmental failures as bone. Here we discuss conditions fitting under the umbrella of rickets, which traditionally referred to skeletal disease associated with vitamin D deficiency but has been more recently expanded to include newly identified factors involved in endocrine regulation of vitamin D, phosphate, and calcium, including phosphate-regulating endopeptidase homolog, X-linked, fibroblast growth factor 23, and dentin matrix protein 1. Systemic mineral metabolism intersects with local regulation of mineralization, and factors including tissue nonspecific alkaline phosphatase are necessary for proper mineralization, where rickets can result from loss of activity of tissue nonspecific alkaline phosphatase. Individuals suffering from rickets often bear the additional burden of a defective dentition, and transgenic mouse models have aided in understanding the nature and mechanisms involved in tooth defects, which may or may not parallel rachitic bone defects. This report reviews dental effects of the range of rachitic disorders, including discussion of etiologies of hereditary forms of rickets, a survey of resulting bone and tooth mineralization disorders, and a discussion of mechanisms, known and hypothesized, involved in the observed dental pathologies. Descriptions of human pathology are augmented by analysis of transgenic mouse models, and new interpretations are brought to bear on questions of how teeth are affected under conditions of rickets. In short, the rachitic tooth will be revealed. PMID:23939820

  18. Effect of Flanking Sounds on the Auditory Continuity Illusion

    PubMed Central

    Kobayashi, Maori; Kashino, Makio

    2012-01-01

    Background The auditory continuity illusion or the perceptual restoration of a target sound briefly interrupted by an extraneous sound has been shown to depend on masking. However, little is known about factors other than masking. Methodology/Principal Findings We examined whether a sequence of flanking transient sounds affects the apparent continuity of a target tone alternated with a bandpass noise at regular intervals. The flanking sounds significantly increased the limit of perceiving apparent continuity in terms of the maximum target level at a fixed noise level, irrespective of the frequency separation between the target and flanking sounds: the flanking sounds enhanced the continuity illusion. This effect was dependent on the temporal relationship between the flanking sounds and noise bursts. Conclusions/Significance The spectrotemporal characteristics of the enhancement effect suggest that a mechanism to compensate for exogenous attentional distraction may contribute to the continuity illusion. PMID:23251666

  19. West Flank Coso, CA FORGE ArcGIS data 2

    DOE Data Explorer

    Doug Blankenship

    2016-03-01

    archive of ArcGIS data from the West Flank FORGE site located in Coso, California. Archive contains: 8 shapefiles polygon of the 3D geologic model polylines of the traces 3D modeled faults polylines of the fault traces from Duffield and Bacon, 1980 polygon of the West Flank FORGE site polylines of the traces of the geologic cross-sections (cross-sections in a separate archive in the GDR) polylines of the traces of the seismic reflection profiles through and adjacent to the West Flank site (seismic reflection profiles in a separate archive in the GDR) points of the well collars in and around the West Flank site polylines of the surface expression of the West Flank well paths

  20. Gear tooth topological modification

    NASA Technical Reports Server (NTRS)

    Kish, Jules G. (Inventor); Isabelle, Charles (Inventor)

    1994-01-01

    The topology of parallel axis gears, such as spur and helical gears is modified to produce quieter and more smoothly operating gear sets with more uniform load distribution. A finite element analysis of the gear in its operating mode is made to produce a plot of radial and tangential deflections of the pinion and gear tooth surfaces which will occur when the gears are loaded during operation. The resultant plot is then inverted to produce a plot, or set of coordinates, which will define the path of travel of the gear tooth grinding wheel, which path is a mirror image of the plot of the finite element analysis. The resulting gears, when subjected to operating loads, will thus be deflected tangentially and radially to their optimum operating, or theoretical true involute, positions so as to produce quieter, smoother, and more evenly loaded gear trains.

  1. Three tooth kinematic coupling

    DOEpatents

    Hale, Layton C.

    2000-01-01

    A three tooth kinematic coupling based on having three theoretical line contacts formed by mating teeth rather than six theoretical point contacts. The geometry requires one coupling half to have curved teeth and the other coupling half to have flat teeth. Each coupling half has a relieved center portion which does not effect the kinematics, but in the limit as the face width approaches zero, three line contacts become six point contacts. As a result of having line contact, a three tooth coupling has greater load capacity and stiffness. The kinematic coupling has application for use in precision fixturing for tools or workpieces, and as a registration device for a work or tool changer or for optics in various products.

  2. Solving tooth sensitivity.

    PubMed

    Miller, Michael B

    2010-01-01

    Solving tooth sensitivity requires both you and the patients to be resilient and to understand that if one approach doesn't work, you can try another one that is non-invasive or, at worst, minimally invasive. Much like the clinician who posted the original question, I strongly believe that it is our responsibility to convince patients that jumping to a radical solution could be totally unnecessary--and expensive-- and still might not solve the problem.

  3. Tooth whitening in children.

    PubMed

    Donly, Kevin J; Donly, Adriana Segura; Baharloo, Laila; Rojas-Candelas, Edith; Garcia-Godoy, Franklin; Zhou, Xiaojie; Gerlach, Robert W

    2002-01-01

    Although there are several case reports of vital tooth bleaching in children, there is limited clinical trial evidence of the safety or efficacy of this practice. Accordingly, a new clinical trial was conducted to evaluate the effects of 2 different bleaching systems, a 6.5% hydrogen peroxide strip system and a 10% carbamide peroxide tray system, in a population of preteens and teens. A total of 106 volunteers, aged 11 to 18 years, took part in this 8-week study. Patients were randomized by a ratio of 2:1 to the strip or tray groups, with each group treating the maxillary arch first and then the mandibular arch for 4 consecutive weeks each. Individuals assigned to the strip group used the system twice daily for 30 minutes (a total of 56 contact hours over the 8-week study). Those assigned to the tray group used that system overnight (approximately 448 contact hours). Digital images were obtained at baseline and after every 2-week treatment period. Average tooth color was determined in L*, a*, b* color space, where L* indicated lightness, a* indicated red-green, and b* indicated yellow-blue. Both systems significantly whitened teeth (P < 0.0001). While there were no significant differences between groups with respect to the primary whitening response (delta b*) on the maxillary teeth, 4 weeks of overnight treatment with the 10% carbamide peroxide tray (approximately 224 contact hours) yielded statistically significant whitening (P < 0.05) on the mandibular teeth compared with the 6.5% hydrogen peroxide strip used for 28 hours. Both tooth-whitening systems had similar sensitivity/irritation reported after instructed use. This research demonstrates that tooth whitening in teens may be safely accomplished using either the short-contact-time hydrogen peroxide bleaching strips or the overnight carbamide peroxide tray systems tested in this study.

  4. Chick tooth induction revisited.

    PubMed

    Cai, Jinglei; Cho, Sung-Won; Ishiyama, Mikio; Mikami, Masato; Hosoya, Akihiro; Kozawa, Yukishige; Ohshima, Hayato; Jung, Han-Sung

    2009-07-15

    Teeth have been missing from Aves for almost 100 million years. However, it is believed that the avian oral epithelium retains the molecular signaling required to induce odontogenesis, and this has been widely examined using heterospecific recombinations with mouse dental mesenchyme. It has also been argued that teeth can form from the avian oral epithelium owing to contamination of the mouse mesenchyme with mouse dental epithelial cells. To investigate the possibility of tooth formation from chick oral epithelium and the characteristics of possible chick enamel, we applied LacZ transgenic mice during heterospecific recombination and examined the further tooth formation. Transmission electron microscopy was used to identify the two tissues during development after heterospecific recombination. No mixing was detected between chick oral epithelium and mouse dental mesenchyme after 2 days, and secretory ameloblasts with Tomes' processes were observed after 1 week. Teeth were formed after 3 weeks with a single cusp pattern, possibly determined by epithelial factors, which is similar to that of the avian tooth in the late Jurassic period. These recombinant teeth were smaller than mouse molars, whereas perfect structures of both ameloblasts and enamel showed histological characteristics similar to those of mice. Together these observations consistent with previous report that odontogenesis is initially directed by species-specific mesenchymal signals interplaying with common epithelial signals.

  5. The Course of Actualization

    ERIC Educational Resources Information Center

    De Smet, Hendrik

    2012-01-01

    Actualization is traditionally seen as the process following syntactic reanalysis whereby an item's new syntactic status manifests itself in new syntactic behavior. The process is gradual in that some new uses of the reanalyzed item appear earlier or more readily than others. This article accounts for the order in which new uses appear during…

  6. Abiotic tooth enamel.

    PubMed

    Yeom, Bongjun; Sain, Trisha; Lacevic, Naida; Bukharina, Daria; Cha, Sang-Ho; Waas, Anthony M; Arruda, Ellen M; Kotov, Nicholas A

    2017-03-01

    Tooth enamel comprises parallel microscale and nanoscale ceramic columns or prisms interlaced with a soft protein matrix. This structural motif is unusually consistent across all species from all geological eras. Such invariability-especially when juxtaposed with the diversity of other tissues-suggests the existence of a functional basis. Here we performed ex vivo replication of enamel-inspired columnar nanocomposites by sequential growth of zinc oxide nanowire carpets followed by layer-by-layer deposition of a polymeric matrix around these. We show that the mechanical properties of these nanocomposites, including hardness, are comparable to those of enamel despite the nanocomposites having a smaller hard-phase content. Our abiotic enamels have viscoelastic figures of merit (VFOM) and weight-adjusted VFOM that are similar to, or higher than, those of natural tooth enamels-we achieve values that exceed the traditional materials limits of 0.6 and 0.8, respectively. VFOM values describe resistance to vibrational damage, and our columnar composites demonstrate that light-weight materials of unusually high resistance to structural damage from shocks, environmental vibrations and oscillatory stress can be made using biomimetic design. The previously inaccessible combinations of high stiffness, damping and light weight that we achieve in these layer-by-layer composites are attributed to efficient energy dissipation in the interfacial portion of the organic phase. The in vivo contribution of this interfacial portion to macroscale deformations along the tooth's normal is maximized when the architecture is columnar, suggesting an evolutionary advantage of the columnar motif in the enamel of living species. We expect our findings to apply to all columnar composites and to lead to the development of high-performance load-bearing materials.

  7. View looking northeast of console table and mirror flanked by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View looking northeast of console table and mirror flanked by 18th century French chairs in the first floor Reception Hall - Perry Belmont House, 1618 New Hampshire Avenue, NW, Washington, District of Columbia, DC

  8. 1. FRONT (NORTH) SIDE; SMOKESTACKS FLANK PROTECTING BAY THAT CONTAINS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. FRONT (NORTH) SIDE; SMOKESTACKS FLANK PROTECTING BAY THAT CONTAINS COAL ELEVATING EQUIPMENT - Rath Packing Company, Boiler Room, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

  9. GATE AND FLANKING FENCE AT ENTRANCE TO MEMORIAL WALK. VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GATE AND FLANKING FENCE AT ENTRANCE TO MEMORIAL WALK. VIEW TO NORTHEAST. - Rock Island National Cemetery, Rock Island Arsenal, 0.25 mile north of southern tip of Rock Island, Rock Island, Rock Island County, IL

  10. DETAIL OF FENCE FLANKING GATE AT ENTRANCE TO MEMORIAL WALK. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF FENCE FLANKING GATE AT ENTRANCE TO MEMORIAL WALK. VIEW TO NORTHEAST. - Rock Island National Cemetery, Rock Island Arsenal, 0.25 mile north of southern tip of Rock Island, Rock Island, Rock Island County, IL

  11. East side detail, showing later wings flanking original entrance on ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    East side detail, showing later wings flanking original entrance on east side. - Fitzsimons General Hospital, Red Cross Building, South Eighth Street Bounded by West McAfee Avenue on South & West Harlow Avenue on North, Aurora, Adams County, CO

  12. 6. DETAIL OF SCROLLED CENTRAL PANEL, FLANKED BY ALLEGORICAL STATUES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. DETAIL OF SCROLLED CENTRAL PANEL, FLANKED BY ALLEGORICAL STATUES (OF LEARNING) AND FESTOONS, ABOVE MAIN ENTRANCE OF THE ROEBLING SCHOOL. - John A. Roebling's Sons Company, Kinkora Works, Village of Roebling, Roebling, Burlington County, NJ

  13. Single implant tooth replacement.

    PubMed

    Briley, T F

    1998-01-01

    It has been shown that direct bone anchorage of dental implants will provide long-term predictability for single tooth implants and multi-unit implants. The function of implant-supported restoration is now routinely achieved. The real challenge facing the restorative dentist and laboratory technician is to achieve optimal aesthetics. The learning objective of this article is to review the prosthodontic procedures essential to maximizing natural aesthetics in implant supported restorations. It will provide a review of master impression techniques, prepable titanium abutments and designing the cement on restoration. Particular emphasis is directed to the soft tissue model from which a series of sequenced techniques can be followed to achieve optimal aesthetics. Analysis of the implant alignment with regard to the neighboring teeth will result in having to make a choice of which prepable abutment will maximize the aesthetic result. The following case outlines how to replace a single missing tooth using an externally hexed implant system and a prefabricated titanium abutment on a 26-year-old male patient.

  14. Seal Out Tooth Decay

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you ... Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  15. Dental Caries (Tooth Decay)

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  16. Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation

    NASA Astrophysics Data System (ADS)

    Endo, H.; Randall, R. B.; Gosselin, C.

    2009-04-01

    This paper presents a technique to differentially diagnose two types of localized gear tooth faults: a spall and a crack in the gear tooth fillet region. These faults could have very different prognoses, but existing diagnostic techniques only detect the presence of localized tooth faults without being able to differentiate between a spall and a crack. The effects of spalls and cracks on the behaviour of gear assemblies were studied using static and dynamic simulation models. Changes in the kinematics of a pair of meshing gears due to a gear tooth fillet crack (TFC) and a tooth flank spall were compared using a static analysis model. The difference in the variation of the transmission error (TE) caused by the two faults reveals their characteristics. The effect of a tooth crack depends on the change in stiffness of the tooth while the effect of a spall is dominantly determined by the geometry of the fault. A technique has previously been proposed to detect spalls [M. EL Badaoui, J. Antoni, F. Guillet, J. Daniere, Use of the moving cepstrum integral to detect and localize tooth spalls in gears, Mechanical System and Signal Processing, 15 (5) (2001) 873-885; M. EL Badaoui, V. Cahouet, F. Guillet, J. Daniere P. Velex, Modelling and detection of localized tooth defects in geared systems, Transaction of ASME, 123 (2001) 422-430], using the cepstrum to detect a negative echo in the signal (from entry into and exit from the spall) and successfully performed differential diagnosis on the simulated vibration signals. While the result of the experimental study showed some differences from the result of the simulation study, the differential diagnosis was successfully performed based on the technique presented in this paper. Further investigation revealed non-linear gearmesh behaviour which was causing differences in the experimental and simulation model results.

  17. Risk Assessment for Tooth Wear.

    PubMed

    Kontaxopoulou, Isavella; Alam, Sonia

    2015-08-01

    Tooth wear has an increasing prevalence in the UK population. The aetiology is commonly multifactorial, and the aetiopathology is through a combination of erosion, attrition, abrasion and abfraction. Erosion is associated with intrinsic or extrinsic acids, and therefore subjects with reflux disease and eating disorders are at increased risk. Fruit juice, fruits and carbonated drink consumption, frequency of consumption and specific habits are also risk factors. Attrition is more prevalent in bruxists. Other habits need to be considered when defining the risk of tooth wear. Abrasion is usually associated with toothbrushing and toothpastes, especially in an already acidic environment. Patients with extensive lesions that affect dentin may be at higher risk, as well as those presenting with unstained lesions. Monitoring of the progress of tooth wear is recommended to identify those with active tooth wear. Indices for tooth wear are a helpful aid.

  18. Partial tooth gear bearings

    NASA Technical Reports Server (NTRS)

    Vranish, John M. (Inventor)

    2010-01-01

    A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

  19. Abiotic tooth enamel

    NASA Astrophysics Data System (ADS)

    Yeom, Bongjun; Sain, Trisha; Lacevic, Naida; Bukharina, Daria; Cha, Sang-Ho; Waas, Anthony M.; Arruda, Ellen M.; Kotov, Nicholas A.

    2017-03-01

    Tooth enamel comprises parallel microscale and nanoscale ceramic columns or prisms interlaced with a soft protein matrix. This structural motif is unusually consistent across all species from all geological eras. Such invariability—especially when juxtaposed with the diversity of other tissues—suggests the existence of a functional basis. Here we performed ex vivo replication of enamel-inspired columnar nanocomposites by sequential growth of zinc oxide nanowire carpets followed by layer-by-layer deposition of a polymeric matrix around these. We show that the mechanical properties of these nanocomposites, including hardness, are comparable to those of enamel despite the nanocomposites having a smaller hard-phase content. Our abiotic enamels have viscoelastic figures of merit (VFOM) and weight-adjusted VFOM that are similar to, or higher than, those of natural tooth enamels—we achieve values that exceed the traditional materials limits of 0.6 and 0.8, respectively. VFOM values describe resistance to vibrational damage, and our columnar composites demonstrate that light-weight materials of unusually high resistance to structural damage from shocks, environmental vibrations and oscillatory stress can be made using biomimetic design. The previously inaccessible combinations of high stiffness, damping and light weight that we achieve in these layer-by-layer composites are attributed to efficient energy dissipation in the interfacial portion of the organic phase. The in vivo contribution of this interfacial portion to macroscale deformations along the tooth’s normal is maximized when the architecture is columnar, suggesting an evolutionary advantage of the columnar motif in the enamel of living species. We expect our findings to apply to all columnar composites and to lead to the development of high-performance load-bearing materials.

  20. CHIPPING FRACTURE RESISTANCE OF DENTURE TOOTH MATERIALS

    PubMed Central

    Quinn, G. D.; Giuseppetti, A. A.; Hoffman, K. H.

    2014-01-01

    Objective The applicability of the edge chipping method to denture tooth materials was assessed. These are softer materials than those usually tested by edge chipping. The edge chipping fracture resistances of polymethylmethacrylate (PMMA) based and two filled resin composite denture tooth materials were compared. Methods An edge chipping machine was used to chip rectangular blocks and flattened anterior denture teeth. Force versus edge distance data were collected over a broad range of forces and distances. Between 20 and 65 chips were made per condition depending upon the material, the scatter, and the indenter type. Different indenter types were used including Rockwell C, sharp conical 120°, Knoop, and Vickers. The edge toughness, Te, was evaluated for different indenter types. Results The edge chipping data collected on the blocks matched the data collected from flattened teeth. High scatter, particularly at large distances and loads, meant that many tests (up to 64) were necessary to compare the denture tooth materials and to ascertain the appropriate data trends. A linear force – distance trend analysis was adequate for comparing these materials. A power law trend might be more appropriate, but the large scatter obscured the definitive determination of the precise trend. Different indenters produce different linear trends, with the ranking of: sharp conical 120°, Rockwell C, and Knoop, from lowest to highest edge toughness. Vickers indenter data were extremely scattered and a sensible trend could not be obtained. Edge toughness was inversely correlated to hardness. Significance Edge chipping data collected either from simple laboratory scale test blocks or from actual denture teeth may be used to evaluate denture materials. The edge chipping method’s applicability has been extended to another class of restorative materials. PMID:24674342

  1. Influence of Conventional and Digital Wax-ups on Axial Tooth Contour.

    PubMed

    Abduo, Jaafar; Bennamoun, Mohammed; Tennant, Marc

    2015-01-01

    The aim of this study was to evaluate the impact of conventional and digital diagnostic wax-up on the axial tooth contour. Dental models of 15 patients were collected. Each model received conventional wax-up and digital wax-up. The conventional wax-up was based on tooth modification with dental wax on actual models. The digital wax-up involved fitting an average tooth form on virtual pretreatment models. Each wax-up model was digitally superimposed on the corresponding pretreatment model. For each modified tooth, analysis planes were extracted at three locations: mesial line angle, midtooth, and distal line angle. The impact of the following variables was evaluated: interarch location (maxilla vs mandible), intra-arch location (anterior vs posterior), tooth category (incisors, canines, premolars, and molars), and tooth location (midtooth vs line angle). The axial contour of the modified teeth increased after each wax-up, and this increase was directly proportional to the distance from the gingival margin. There is a clear tendency for the digital wax-up to cause a greater contour increase than the conventional wax-up. The anterior teeth were associated with a greater tooth contour increase than posterior teeth and the contour of the molars was the least affected. Although the conventional wax-up contour alteration was significantly less than for the digital wax-up, the actual difference was minimal.

  2. Transducer model produces facilitation from opposite-sign flanks

    NASA Technical Reports Server (NTRS)

    Solomon, J. A.; Watson, A. B.; Morgan, M. J.

    1999-01-01

    Small spots, lines and Gabor patterns can be easier to detect when they are superimposed upon similar spots, lines and Gabor patterns. Traditionally, such facilitation has been understood to be a consequence of nonlinear contrast transduction. Facilitation has also been reported to arise from non-overlapping patterns with opposite sign. We point out that this result does not preclude the traditional explanation for superimposed targets. Moreover, we find that facilitation from opposite-sign flanks is weaker than facilitation from same-sign flanks. Simulations with a transducer model produce opposite-sign facilitation.

  3. West Flank Coso FORGE Magnetotelluric 3D Data

    SciTech Connect

    Doug Blankenship

    2016-01-01

    This is the 3D version of the MT data for the West Flank FORGE area.The Coso geothermal field has had three Magnetotelluric (MT) datasets collected including surveys in 2003, 2006, and 2011. The final collection, in 2011, expanded the survey to the west and covers the West Flank of FORGE area.This most recent data set was collected by Schlumberger/WesternGeco and inverted by the WesternGeco GeoSolutions Integrated EM Center of Excellence in Milan, Italy; the 2003 and 2006 data were integrated for these inversions in the present study.

  4. The Human Sweet Tooth

    PubMed Central

    Reed, Danielle R; McDaniel, Amanda H

    2006-01-01

    Humans love the taste of sugar and the word "sweet" is used to describe not only this basic taste quality but also something that is desirable or pleasurable, e.g., la dolce vita. Although sugar or sweetened foods are generally among the most preferred choices, not everyone likes sugar, especially at high concentrations. The focus of my group's research is to understand why some people have a sweet tooth and others do not. We have used genetic and molecular techniques in humans, rats, mice, cats and primates to understand the origins of sweet taste perception. Our studies demonstrate that there are two sweet receptor genes (TAS1R2 and TAS1R3), and alleles of one of the two genes predict the avidity with which some mammals drink sweet solutions. We also find a relationship between sweet and bitter perception. Children who are genetically more sensitive to bitter compounds report that very sweet solutions are more pleasant and they prefer sweet carbonated beverages more than milk, relative to less bitter-sensitive peers. Overall, people differ in their ability to perceive the basic tastes, and particular constellations of genes and experience may drive some people, but not others, toward a caries-inducing sweet diet. Future studies will be designed to understand how a genetic preference for sweet food and drink might contribute to the development of dental caries. PMID:16934118

  5. Functional tooth restoration utilising split germs through re-regionalisation of the tooth-forming field

    PubMed Central

    Yamamoto, Naomi; Oshima, Masamitsu; Tanaka, Chie; Ogawa, Miho; Nakajima, Kei; Ishida, Kentaro; Moriyama, Keiji; Tsuji, Takashi

    2015-01-01

    The tooth is an ectodermal organ that arises from a tooth germ under the regulation of reciprocal epithelial-mesenchymal interactions. Tooth morphogenesis occurs in the tooth-forming field as a result of reaction-diffusion waves of specific gene expression patterns. Here, we developed a novel mechanical ligation method for splitting tooth germs to artificially regulate the molecules that control tooth morphology. The split tooth germs successfully developed into multiple correct teeth through the re-regionalisation of the tooth-forming field, which is regulated by reaction-diffusion waves in response to mechanical force. Furthermore, split teeth erupted into the oral cavity and restored physiological tooth function, including mastication, periodontal ligament function and responsiveness to noxious stimuli. Thus, this study presents a novel tooth regenerative technology based on split tooth germs and the re-regionalisation of the tooth-forming field by artificial mechanical force. PMID:26673152

  6. The ridges of Europa: Extensions of adjacent topography onto their flanks

    NASA Astrophysics Data System (ADS)

    Greenberg, Richard; Sak, Peter B.

    2014-03-01

    The surface of Europa displays numerous generations of intersecting arrays of linear ridges. At some locations along these ridges, older ridges on adjacent terrain appear to extend up the flank of a more recent ridge. It has thus been suggested that the ridges may have formed by upturning of that adjacent terrain. However, the newer ridges generally appear to be material deposited over the older terrain. Here we consider how the morphology of the overprinted topography may have been inherited by the more recent ridges. An analogous process occurs along some sediment-starved convergent plate boundaries on Earth, where the poorly consolidated material of a frontal prism of an overriding plate is pushed over preexisting ridges and seamounts on the downgoing plate. The overriding plate inherits the morphology of the downgoing plate even though the actual extension of that topography has been underthrust and buried. A well-studied example lies offshore of Costa Rica where the Caribbean plate overrides the Cocos plate. Experiments show other mechanisms as well: mass-wasting down a flank can result in extensions of adjacent ridges thanks to the geometry imposed by a constant angle of repose; in addition, more pronounced extensions of the older ridges result if the new ridge grows as it is bulldozed from behind (i.e., from the central groove of a double ridge on Europa). The shapes of the ridge extensions are distinctly different in these two cases. If tidal pumping extrudes material to the surface at the center of a double ridge, it might drive the latter mechanism. The ridge extensions observed on the flanks of more recent ridges may provide a crucial diagnostic of dominant ridge-building mechanisms when and if additional images are obtained at high resolution from future exploration. In additional to their morphology, the distribution of ridge extensions at only isolated locales may also provide constraints on ridge formation processes and their diversity.

  7. 10. INTERIOR OF LIVING ROOM SHOWING FRONT DOOR FLANKED BY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR OF LIVING ROOM SHOWING FRONT DOOR FLANKED BY SLIDING GLASS WINDOWS AND ELECTRICAL WALL HEATER. ORIGINAL 1-LIGHT OVER 1-LIGHT, DOUBLE-HUNG WINDOW AT PHOTO RIGHT. CEILING VENT TO CHIMNEY AT RIGHT UPPER PHOTO CENTER. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  8. West Flank Coso, CA FORGE Natural Fracture data

    SciTech Connect

    Doug Blankenship

    2016-05-16

    Natural fracture data from wells 33-7, 33A-7,52A-7, 52B-7 and 83-11 at West Flank. Fracture orientations were determined from image logs of these wells (see accompanying submissions). Data files contain depth, apparent (in wellbore reference frame) and true (in geographic reference frame) azimuth and dip, respectively.

  9. Diagnosis of susceptibility to malignant hyperthermia with flanking DNA markers.

    PubMed Central

    Healy, S J; Heffron, J J; Lehane, M; Bradley, D G; Johnson, K; McCarthy, T V

    1991-01-01

    OBJECTIVE--To define the region on human chromosome 19 carrying the gene for malignant hyperthermia susceptibility and to evaluate the use of flanking DNA markers in diagnosing susceptibility. DESIGN--Prospective molecular genetic linkage studies in a large malignant hyperthermia pedigree. SETTING--Irish malignant hyperthermia testing centre. SUBJECTS--A large Irish malignant hyperthermia pedigree. MAIN OUTCOME MEASURES--Routine diagnosis of susceptibility to malignant hyperthermia with in vitro contracture test on muscle biopsy specimens and genetic linkage between susceptibility and polymorphic DNA markers in a malignant hyperthermia family. RESULTS--Genetic typing of polymorphic DNA markers in a large Irish malignant hyperthermia pedigree generated a lod score of greater than 3 for the marker D19S9 and showed that the gene for susceptibility is flanked by the markers D19S9 and D19S16. These tightly linked flanking markers allowed non-invasive presymptomatic diagnosis of susceptibility in five untested subjects in the large pedigree with an accuracy of greater than 99.7%. CONCLUSIONS--DNA markers flanking the gene for susceptibility to malignant hyperthermia can be used with high accuracy to diagnose susceptibility in subjects in large known malignant hyperthermia pedigrees and may replace the previous in vitro contracture test for diagnosing this inherited disorder in large families with malignant hyperthermia. PMID:1684123

  10. FACILITY 713, LIVING ROOM SHOWING DIAMONDPANED WINDOWS FLANKING THE FIREPLACE, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FACILITY 713, LIVING ROOM SHOWING DIAMOND-PANED WINDOWS FLANKING THE FIREPLACE, AND LEADED-GLASS WINDOWS IN DINING ROOM IN RIGHT BACKGROUND, VIEW FACING SOUTHEAST. - Schofield Barracks Military Reservation, Central-Entry Single-Family Housing Type, Between Bragg & Grime Streets near Ayres Avenue, Wahiawa, Honolulu County, HI

  11. Clinical measurement of tooth wear: Tooth wear indices

    PubMed Central

    López-Frías, Francisco J.; Castellanos-Cosano, Lizett; Martín-González, Jenifer; Llamas-Carreras, José M.

    2012-01-01

    Attrition, erosion, and abrasion result in alterations to the tooth and manifest as tooth wear. Each classification corresponds to a different process with specific clinical features. Classifications made so far have no accurate prevalence data because the indexes do not necessarily measure a specific etiology, or because the study populations can be diverse in age and characteristics. Tooth wears (attrition, erosion and abrasion) is perceived internationally as a growing problem. However, the interpretation and comparison of clinical and epidemiological studies, it is increasingly difficult because of differences in terminology and the large number of indicators/indices that have been developed for the diagnosis, classification and monitoring of the loss of dental hard tissue. These indices have been designed to identify increasing severity and are usually numerical, none have universal acceptance, complicating the evaluation of the true increase in prevalence reported. This article considers the ideal requirements for an erosion index. A literature review is conducted with the aim of analyzing the evolution of the indices used today and discuss whether they meet the clinical needs and research in dentistry. Key words:Tooth wear, tooth wear indices, attrition, erosion, abrasion, abfraction. PMID:24558525

  12. Clinical measurement of tooth wear: Tooth wear indices.

    PubMed

    López-Frías, Francisco J; Castellanos-Cosano, Lizett; Martín-González, Jenifer; Llamas-Carreras, José M; Segura-Egea, Juan J

    2012-02-01

    Attrition, erosion, and abrasion result in alterations to the tooth and manifest as tooth wear. Each classification corresponds to a different process with specific clinical features. Classifications made so far have no accurate prevalence data because the indexes do not necessarily measure a specific etiology, or because the study populations can be diverse in age and characteristics. Tooth wears (attrition, erosion and abrasion) is perceived internationally as a growing problem. However, the interpretation and comparison of clinical and epidemiological studies, it is increasingly difficult because of differences in terminology and the large number of indicators/indices that have been developed for the diagnosis, classification and monitoring of the loss of dental hard tissue. These indices have been designed to identify increasing severity and are usually numerical, none have universal acceptance, complicating the evaluation of the true increase in prevalence reported. This article considers the ideal requirements for an erosion index. A literature review is conducted with the aim of analyzing the evolution of the indices used today and discuss whether they meet the clinical needs and research in dentistry. Key words:Tooth wear, tooth wear indices, attrition, erosion, abrasion, abfraction.

  13. Flexural uplift of rift flanks in central Greece

    NASA Astrophysics Data System (ADS)

    Poulimenos, George; Doutsos, Theodor

    1997-12-01

    Uplifts, with elevations of up to 2000 m and short wavelengths (30-35 km), flank three major grabens in central Greece: the Rio, Sparta, and Atalanti grabens. They are bordered on their landward sides by narrow basins oriented parallel to the graben axes: the Manesi and Trichonis basins at the Rio graben and Copais and Istiea basins at the Atalanti graben. The flexural origin of these uplift profiles is investigated here by using thin, broken plate models. It is demonstrated that the observed topography of the graben flanks is consistent with the upward deflection of elastic and viscoelastic plates in response to upward directed forces applied at the graben flanks. In order to evaluate to applicability of each model, their predictions are checked against the observations. The elastic predictive modeling fits well with the observed flexural wavelengths and the flanking seismicity. However, it fails to predict the graben widths and the inferred elastic layer thickness. In contrast, the viscoelastic model successfully explains the graben widths and the "back" basins as flexural hinterland basins and matches the seismological data and the time constraints of rifting. It is therefore suggested that flexural uplift with viscoelastic relaxation accounts for the building of the graben flanks. The invoked viscoelastic models constrain the effective elastic thickness of the plates at 10 km for the Rio graben and 15 km for the Sparta and Atalanti grabens, suggesting a low-viscosity lower crust. Furthermore, they predict low rates of tectonic uplift of the order of 0.1 mm a-1 for the Atalanti graben, intermediate rates of 0.24-0.37 mm a-1 for the Rio graben, and high rates of 0.7-0.9 mm a-1 for the Sparta graben. The latter are quite possibly overestimated since napping events, capable of producing high local relief, are traced normal to the modeled profiles.

  14. Consideration of Moving Tooth Load in Gear Crack Propagation Predictions

    NASA Technical Reports Server (NTRS)

    Lewicki, David G.; Handschuh, Robert F.; Spievak, Lisa E.; Wawrzynek, Paul A.; Ingraffea, Anthony R.

    2001-01-01

    Robust gear designs consider not only crack initiation, but crack propagation trajectories for a fail-safe design. In actual gear operation, the magnitude as well as the position of the force changes as the gear rotates through the mesh. A study to determine the effect of moving gear tooth load on crack propagation predictions was performed. Two-dimensional analysis of an involute spur gear and three-dimensional analysis of a spiral-bevel pinion gear using the finite element method and boundary element method were studied and compared to experiments. A modified theory for predicting gear crack propagation paths based on the criteria of Erdogan and Sih was investigated. Crack simulation based on calculated stress intensity factors and mixed mode crack angle prediction techniques using a simple static analysis in which the tooth load was located at the highest point of single tooth contact was validated. For three-dimensional analysis, however, the analysis was valid only as long as the crack did not approach the contact region on the tooth.

  15. Tooth polishing: The current status

    PubMed Central

    Sawai, Madhuri Alankar; Bhardwaj, Ashu; Jafri, Zeba; Sultan, Nishat; Daing, Anika

    2015-01-01

    Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients’ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same. PMID:26392683

  16. Flexural analysis of uplifted rift flanks on Venus

    NASA Technical Reports Server (NTRS)

    Evans, Susan A.; Simons, Mark; Solomon, Sean C.

    1992-01-01

    Knowledge of the thermal structure of a planet is vital to a thorough understanding of its general scheme of tectonics. Since no direct measurements of heat flow or thermal gradient are available for Venus, most estimates have been derived from theoretical considerations or by analog with the Earth. The flexural response of the lithosphere to applied loads is sensitive to regional thermal structure. Under the assumption that the yield strength as a function of depth can be specified, the temperature gradient can be inferred from the effective elastic plate thickness. Previous estimates of the effective elastic plate thickness of Venus range from 11-18 km for the foredeep north of Uorsar Rupes to 30-60 km for the annular troughs around several coronae. Thermal gradients inferred for these regions are 14-23 K km(exp -1) and 4-9 K km(exp -1) respectively. In this study, we apply the same techniques to investigate the uplifted flanks of an extensional rift. Hypotheses for the origin of uplifted rift flanks on Earth include lateral transport of heat from the center of the rift, vertical transport of heat by small-scale convection, differential thinning of the lithosphere, dynamical uplift, and isostatic response to mechanical uploading of the lithosphere. The 1st hypothesis is considered the dominant contributor to terrestrial rift flanks lacking evidence for volcanic activity, particularly for rift structures that are no longer active. In this study, we model the uplifted flanks of a venusian rift as the flexural response to a vertical end load.

  17. Geomorphology of the north flank of the Uinta Mountains

    USGS Publications Warehouse

    Bradley, W.H.

    1936-01-01

    beds now form hogbacks ranked along the sides of the fold. In places large faults, approximating the regional strike, cut these steeply inclined beds. Gently warped Tertiary sediments, mostly of Eocene age, fill the large Green River Basin, which lies north of the range, to a depth of several thousand feet and lap up on the flanks of the mountains, from which they were chiefly derived.

  18. The hamster flank organ model: Is it relevant to man

    SciTech Connect

    Franz, T.J.; Lehman, P.A.; Pochi, P.; Odland, G.F.; Olerud, J. )

    1989-10-01

    The critical role that androgens play in the etiology of acne has led to a search for topically active antiandrogens and the frequent use of the flank organ of the golden Syrian hamster as an animal model. 17-alpha-propyltestosterone (17-PT) has been identified as having potent antiandrogenic activity in the hamster model, and this report describes its clinical evaluation. Two double-blind placebo controlled studies comparing 4% 17-PT in 80% alcohol versus vehicle alone were conducted. One study examined 17-PT sebosuppressive activity in 20 subjects. The second study examined its efficacy in 44 subjects having mild to moderate acne. A third study measured in vitro percutaneous absorption of 17-PT through hamster flank and monkey skin, and human face skin in-vivo, using radioactive drug. 17-PT was found to be ineffective in reducing either the sebum excretion rate or the number of inflammatory acne lesions. Failure of 17-PT to show clinical activity was not a result of poor percutaneous absorption. Total absorption in man was 7.7% of the dose and only 1.0% in the hamster. The sebaceous gland of hamster flank organ is apparently more sensitive to antiandrogens than the human sebaceous gland.

  19. Tooth separation: a risk-free procedure?

    PubMed

    Monini, André da Costa; Guimarães, Murilo de Sousa; Gandini Júnior, Luiz Gonzaga; Santos-Pinto, Lourdes; Hebling, Josimeri

    2012-09-01

    This article reports the case of a 12-year-old patient with tooth extrusion, pain, gingival bleeding, and localized periodontitis near the maxillary second premolar. Despite probing and radiographic examination, it was not possible to establish the etiology. Tooth extraction was indicated because of the severe tooth mobility and extrusion. Curettage of the tooth socket revealed a rubber separator. Preventive approaches are suggested to avoid iatrogenesis and legal problems.

  20. Biology of tooth replacement in amniotes

    PubMed Central

    Whitlock, John A; Richman, Joy M

    2013-01-01

    Tooth replacement is a common trait to most vertebrates, including mammals. Mammals, however, have lost the capacity for continuous tooth renewal seen in most other vertebrates, and typically have only 1–2 generations of teeth. Here, we review the mechanisms of tooth replacement in reptiles and mammals, and discuss in detail the current and historical theories on control of timing and pattern of tooth replacement and development. PMID:23788284

  1. 21 CFR 872.3920 - Porcelain tooth.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Porcelain tooth. 872.3920 Section 872.3920 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3920 Porcelain tooth. (a) Identification. A porcelain tooth is a prefabricated device made of porcelain powder for clinical use (§ 872.6660) intended for...

  2. 21 CFR 872.3920 - Porcelain tooth.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Porcelain tooth. 872.3920 Section 872.3920 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3920 Porcelain tooth. (a) Identification. A porcelain tooth is a prefabricated device made of porcelain powder for clinical use (§ 872.6660) intended for...

  3. 21 CFR 872.3920 - Porcelain tooth.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Porcelain tooth. 872.3920 Section 872.3920 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3920 Porcelain tooth. (a) Identification. A porcelain tooth is a prefabricated device made of porcelain powder for clinical use (§ 872.6660) intended for...

  4. 21 CFR 872.3920 - Porcelain tooth.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Porcelain tooth. 872.3920 Section 872.3920 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3920 Porcelain tooth. (a) Identification. A porcelain tooth is a prefabricated device made of porcelain powder for clinical use (§ 872.6660) intended for...

  5. 21 CFR 872.3920 - Porcelain tooth.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Porcelain tooth. 872.3920 Section 872.3920 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3920 Porcelain tooth. (a) Identification. A porcelain tooth is a prefabricated device made of porcelain powder for clinical use (§ 872.6660) intended for...

  6. Charcot-Marie-Tooth Disease

    MedlinePlus

    Charcot-Marie-Tooth disease (CMT) is a group of genetic nerve disorders. It is named after the three doctors who first identified it. ... a nerve biopsy. There is no cure. The disease can be so mild you don't realize ...

  7. Tooth-Bleaching: A Review of the Efficacy and Adverse Effects of Various Tooth Whitening Products.

    PubMed

    Majeed, Abdul; Farooq, Imran; Grobler, Sias R; Rossouw, R J

    2015-12-01

    Tooth bleaching (whitening) is one of the most common and inexpensive method for treating discolouration of teeth. Dental aesthetics, especially tooth colour, is of great importance to majority of the people; and discolouration of even a single tooth can negatively influence the quality of life. Therefore, a review of the literature was carried out (limited to aesthetic tooth-bleaching) to provide a broad overview of the efficacy and adverse effects of various tooth whitening products on soft and hard oral tissues.

  8. An integrated electro-mechanical model of motor-gear units—Applications to tooth fault detection by electric measurements

    NASA Astrophysics Data System (ADS)

    Feki, N.; Clerc, G.; Velex, Ph.

    2012-05-01

    Fault diagnosis in geared transmissions is traditionally based on vibration monitoring but, in a number of cases, sensor implementation and signal transfer from rotary to stationary parts can cause problems. This paper presents an original integrated electro-mechanical model aimed at testing the possibility and the interest of tooth fault detection based on electric measurements on the motor stator. The motor is simulated using Kron's transformation while the mechanical transmission is accounted for by a lumped parameter model. Tooth defects are assimilated to distributions of initial separations between the mating flanks whose positions and shapes are controlled. A unique non-linear parametrically excited differential system is obtained, which provides direct access to both the electrical and mechanical variables. A number of results are presented, which illustrate the possibility of tooth fault detection by stator current measurements with regard to the position and dimensions of the defect.

  9. Adhesive and Migratory Effects of Phosphophoryn Are Modulated by Flanking Peptides of the Integrin Binding Motif

    PubMed Central

    Suzuki, Shigeki; Kobuke, Seiji; Haruyama, Naoto; Hoshino, Hiroaki; Kulkarni, Ashok B.; Nishimura, Fusanori

    2014-01-01

    Phosphophoryn (PP) is generated from the proteolytic cleavage of dentin sialophosphoprotein (DSPP). Gene duplications in the ancestor dentin matrix protein-1 (DMP-1) genomic sequence created the DSPP gene in toothed animals. PP and DMP-1 are phosphorylated extracellular matrix proteins that belong to the family of small integrin-binding ligand N-linked glycoproteins (SIBLINGs). Many SIBLING members have been shown to evoke various cell responses through the integrin-binding Arg-Gly-Asp (RGD) domain; however, the RGD-dependent function of PP is not yet fully understood. We demonstrated that recombinant PP did not exhibit any obvious cell adhesion ability, whereas the simultaneously purified recombinant DMP-1 did. A cell adhesion inhibitory analysis was performed by pre-incubating human osteosarcoma MG63 cells with various PP peptides before seeding onto vitronectin. The results obtained revealed that the incorporation of more than one amino acid on both sides of the PP-RGD domain was unable to inhibit the adhesion of MG63 cells onto vitronectin. Furthermore, the inhibitory activity of a peptide containing the PP-RGD domain with an open carboxyl-terminal side (H-463SDESDTNSESANESGSRGDA482-OH) was more potent than that of a peptide containing the RGD domain with an open amino-terminal side (H-478SRGDASYTSDESSDDDNDSDSH499-OH). This phenomenon was supported by the potent cell adhesion and migration abilities of the recombinant truncated PP, which terminated with Ala482. Furthermore, various point mutations in Ala482 and/or Ser483 converted recombinant PP into cell-adhesive proteins. Therefore, we concluded that the Ala482-Ser483 flanking sequence, which was detected in primates and mice, was the key peptide bond that allowed the PP-RGD domain to be sequestered. The differential abilities of PP and DMP-1 to act on integrin imply that DSPP was duplicated from DMP-1 to serve as a crucial extracellular protein for tooth development rather than as an integrin

  10. COMPUTED TOMOGRAPHY OF TOOTH RESORPTION IN CATS.

    PubMed

    Lang, Linda G; Wilkinson, Thomas E; White, Tammy L; Farnsworth, Raelynn K; Potter, Kathleen A

    2016-09-01

    Tooth resorption is the most common dental disease in cats and can be a source of oral pain. The current clinical gold standard for diagnosis includes a combination of oral exam and dental radiography, however early lesions are not always detected. Computed tomography (CT) of the skull, including the dental arches, is a commonly performed diagnostic procedure, however the appearance of tooth resorption on CT and the diagnostic ability of CT to detect tooth resorption have not been evaluated. The purpose of this prospective, descriptive, diagnostic accuracy study was to characterize the CT appearance of tooth resorption in a sample of affected cats and to evaluate the sensitivity and specificity of CT for tooth resorption compared to the clinical gold standard of oral exam and intraoral dental radiography. Twenty-eight cat cadaver specimens were recruited for inclusion. Each specimen was evaluated using oral exam, intraoral dental radiography, and computed tomography (four different slice thicknesses). Each tooth was evaluated for the presence or absence of tooth resorption. Teeth with lesions and a subset of normal teeth were evaluated with histopathology. On CT, tooth resorption appeared as irregularly marginated hypoattenuating defects in the mineral attenuating tooth components, most commonly involving the root or cementoenamel junction. Sensitivity for CT detection of tooth resorption was fair to poor (42.2-57.7%) and specificity was good to excellent (92.8-96.3%). Findings from this study indicated that CT has high specificity but low sensitivity for detection of tooth resorption in cats.

  11. Flank Terraces of Martian Shield Volcanoes: Architecture and Formation

    NASA Astrophysics Data System (ADS)

    Byrne, P. K.; van Wyk de Vries, B.; Murray, J. B.; Troll, V. R.

    2007-12-01

    Flank terraces are topographically subtle bulge-like structures on the sides of numerous Martian shield volcanoes. They have a gentle convex profile in cross section. These structures have an arcuate outline in plan, and are arranged in a distinctive, imbricate "fish scale" pattern about each terraced edifice. Terraces are generally regarded as compressive features, formed by magma chamber inflation or lithospheric flexure. Some workers argue they are extensional in nature however, due to flank relaxation or gravitational slumping. Previously recognised on Olympus Mons and the Tharsis Montes (Ascraeus, Pavonis, and Arsia), we show that this pattern also exists on Elysium Mons, Hecates Tholus, Albor Tholus, and Ceraunius Tholus, and Alba Patera. Terrace distribution differs between volcanoes, but the characteristic pattern remains the same. Terraces must be late-stage/reactivated structures relative to volcano growth, as they remain visible today. The mechanism responsible for terrace formation probably acts throughout the edifices, as terraces occur at all volcano elevations. Differences in distribution may be due to variations in edifice internal structure, geometry, or the interplay between local and regional stresses. That terraces occur across such a range of Martian volcanoes implies they are size-, slope-, and volcano age-independent structures. The presence and number of other tectonic structures, e.g. calderas and gräben, also vary between terraced volcanoes. Like these other structures, flank terraces may be a fundamental feature of Martian volcano development. In light of these observations, existing formation mechanism hypotheses must be revisited. Magma chamber tumescence, which may have occurred to varying extents on these volcanoes, does not produce convex terrace structures. Both flank relaxation and shallow slumps are associated with volcano spreading, yet none of the Martian examples shows evidence of radially oriented gräben or collapse scars. A

  12. West Flank Coso, CA FORGE 3D geologic model

    SciTech Connect

    Doug Blankenship

    2016-03-01

    This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The data file is tabular data in a text file, with lithology data associated with X,Y,Z grid points. All the relevant information is in the file header (the spatial reference, the projection etc.) In addition all the fields in the data file are identified in the header.

  13. Tooth sensitivity: mechanisms and management.

    PubMed

    Markowitz, K

    1993-08-01

    Tooth sensitivity is a common complaint encountered in clinical practice. Exposed superficial dentin is free of nerve endings, yet sensitive. Experimental evidence indicates that stimuli, such as probing the dentin surface and air blasts, induce fluid movements in the dentinal tubules and these fluid movements, in turn, activate the intradental nerves. The condition of the dentin surface is critically important in allowing this process. In addition, the internal environment of the pulp may influence nerve excitability. Therapies for tooth sensitivity include both agents that obstruct the dentinal tubules and agents that can decrease the excitability of the intradental nerves. The exact treatment used depends on the etiology of the individual's problem and the extent of dentinal tissue damage.

  14. Towards tooth friendly soft drinks.

    PubMed

    Kolahi, Jafar; Fazilati, Mohamad; Kadivar, Mahdi

    2009-10-01

    Most soft drinks contain high concentration of simple carbohydrates and have a pH of 3 or even lower. Therefore, they are harmful for tooth structure. A tooth friendly soft drink (T.F.S.D) should have the following characteristics and elements; fluoride (approximately 1 ppm), casein phosphopeptide-amorphous calcium phosphate (2%), xylitol (4-6g/serving), tea polyphenols (2-4 mg/ml), cranberry extract (250 mg/ml of the flavonoids quercetin and myricetin), sugar free, pH close to 5.5 and super oxygenation (240,000 ppm) vs. carbonation. T.F.S.D can be packaged in a container which gaseous oxygen is dissolved in a liquid in the form of bubbles. However, looking at opportunities for so-called sophisticated soft drinks, T.F.S.D will be an example for a functional and health oriented soft drink.

  15. Optical spectroscopy and tooth decay

    NASA Astrophysics Data System (ADS)

    Misra, P.; De, T.; Singh, R.

    2005-11-01

    Optical spectroscopy in the ultraviolet, visible and mid-infrared spectral regions has been used to discriminate between healthy and diseased teeth of patients in the age range 15-75 years. Spectral scans of absorbance versus wavenumber and fluorescence intensity versus wavelength have been recorded and investigated for caries and periodontal disease. Such optical diagnostics can prove very useful in the early detection and treatment of tooth decay.

  16. Plasma Transport at the Magnetospheric Flank Boundary. Final report

    SciTech Connect

    Otto, Antonius

    2012-04-23

    Progress is highlighted in these areas: 1. Model of magnetic reconnection induced by three-dimensional Kelvin Helmholtz (KH) modes at the magnetospheric flank boundary; 2. Quantitative evaluation of mass transport from the magnetosheath onto closed geomagnetic field for northward IMF; 3. Comparison of mass transfer by cusp reconnection and Flank Kelvin Helmholtz modes; 4. Entropy constraint and plasma transport in the magnetotail - a new mechanism for current sheet thinning; 5. Test particle model for mass transport onto closed geomagnetic field for northward IMF; 6. Influence of density asymmetry and magnetic shear on (a) the linear and nonlinear growth of 3D Kelvin Helmholtz (KH) modes, and (b) three-dimensional KH mediated mass transport; 7. Examination of entropy and plasma transport in the magnetotail; 8. Entropy change and plasma transport by KH mediated reconnection - mixing and heating of plasma; 9. Entropy and plasma transport in the magnetotail - tail reconnection; and, 10. Wave coupling at the magnetospheric boundary and generation of kinetic Alfven waves.

  17. A modal-spectral model for flanking transmissions

    NASA Astrophysics Data System (ADS)

    Poblet-Puig, Jordi

    2016-11-01

    A model for the prediction of direct and indirect (flanking) sound transmissions is presented. It can be applied to geometries with extrusion symmetry. The structures are modelled with spectral finite elements. The acoustic domains are described by means of a modal expansion of the pressure field and must be cuboid-shaped. These reasonable simplifications in the geometry allow the use of more efficient numerical methods. Consequently the coupled vibroacoustic problem in structures such as junctions is efficiently solved. The vibration reduction index of T-junctions with acoustic excitation and with point force excitation is compared. The differences due to the excitation type obey quite general trends that could be taken into account by prediction formulas. However, they are smaller than other uncertainties not considered in practice. The model is also used to check if the sound transmissions of a fully vibroacoustic problem involving several flanking paths can be reproduced by superposition of independent paths. There exist some differences caused by the interaction between paths, which are more important at low frequencies.

  18. Biomarkers in orthodontic tooth movement.

    PubMed

    Kumar, A Anand; Saravanan, K; Kohila, K; Kumar, S Sathesh

    2015-08-01

    Tooth movement by orthodontic treatment is characterized by remodeling changes in the periodontal ligament, alveolar bone, and gingiva. A reflection of these phenomenons can be found in the gingival crevicular fluid (GCF) of moving teeth, with significant elevations in the concentrations of its components like, cytokines, neurotransmitters, growth Factors, and a arachidonic acid metabolites. GCF arises at the gingival margin and can be described as a transudate or an exudate. Several studies have focused on the composition of GCF and the changes that occur during orthodontic tooth movement (OTM). GCF component analysis is a non-invasive method for studying the cellular response of the underlying periodontium. Clinically, GCF can be easily collected using platinum loops, filter paper strips, gingival washings, and micropipettes. A number of GCF biomarkers involve in bone remodeling during OTM. The data suggest that knowledge of all the biomarkers present in the GCF that can be used to mark the changes in tooth that is undergoing orthodontic treatment may be of clinical usefulness leading to proper choice of mechanical stress to improve and to shorten treatment time and avoid side effects.

  19. Digital Radiography for Determination of Primary Tooth Length: In Vivo and Ex Vivo Studies

    PubMed Central

    Basso, Maria D.; Jeremias, Fabiano; Cordeiro, Rita C. L.; Santos-Pinto, Lourdes

    2015-01-01

    Background. Methods for determining the root canal length of the primary tooth should yield accurate and reproducible results. In vitro studies show some limitations, which do not allow their findings to be directly transferred to a clinical situation. Aim. To compare the accuracy of radiographic tooth length obtained from in vivo digital radiograph with that obtained from ex vivo digital radiograph. Method. Direct digital radiographs of 20 upper primary incisors were performed in teeth (2/3 radicular resorption) that were radiographed by an intraoral sensor, according to the long-cone technique. Teeth were extracted, measured, and mounted in a resin block, and then radiographic template was used to standardise the sensor-target distance (30 cm). The apparent tooth length (APTL) was obtained from the computer screen by means of an electronic ruler accompanying the digital radiography software (CDR 2.0), whereas the actual tooth length (ACTL) was obtained by means of a digital calliper following extraction. Data were compared to the ACTL by variance analysis and Pearson's correlation test. Results. The values for APTL obtained from in vivo radiography were slightly underestimated, whereas those values obtained from ex vivo were slightly overestimated. No significance was observed (P ≤ 0.48) between APTL and ACTL. Conclusion. The length of primary teeth estimated by in vivo and ex vivo comparisons using digital radiography was found to be similar to the actual tooth length. PMID:25802894

  20. Accuracy and precision of estimating age of gray wolves by tooth wear

    USGS Publications Warehouse

    Gipson, P.S.; Ballard, W.B.; Nowak, R.M.; Mech, L.D.

    2000-01-01

    We evaluated the accuracy and precision of tooth wear for aging gray wolves (Canis lupus) from Alaska, Minnesota, and Ontario based on 47 known-age or known-minimum-age skulls. Estimates of age using tooth wear and a commercial cementum annuli-aging service were useful for wolves up to 14 years old. The precision of estimates from cementum annuli was greater than estimates from tooth wear, but tooth wear estimates are more applicable in the field. We tended to overestimate age by 1-2 years and occasionally by 3 or 4 years. The commercial service aged young wolves with cementum annuli to within ?? 1 year of actual age, but under estimated ages of wolves ???9 years old by 1-3 years. No differences were detected in tooth wear patterns for wild wolves from Alaska, Minnesota, and Ontario, nor between captive and wild wolves. Tooth wear was not appropriate for aging wolves with an underbite that prevented normal wear or severely broken and missing teeth.

  1. Automating digital leaf measurement: the tooth, the whole tooth, and nothing but the tooth.

    PubMed

    Corney, David P A; Tang, H Lilian; Clark, Jonathan Y; Hu, Yin; Jin, Jing

    2012-01-01

    Many species of plants produce leaves with distinct teeth around their margins. The presence and nature of these teeth can often help botanists to identify species. Moreover, it has long been known that more species native to colder regions have teeth than species native to warmer regions. It has therefore been suggested that fossilized remains of leaves can be used as a proxy for ancient climate reconstruction. Similar studies on living plants can help our understanding of the relationships. The required analysis of leaves typically involves considerable manual effort, which in practice limits the number of leaves that are analyzed, potentially reducing the power of the results. In this work, we describe a novel algorithm to automate the marginal tooth analysis of leaves found in digital images. We demonstrate our methods on a large set of images of whole herbarium specimens collected from Tilia trees (also known as lime, linden or basswood). We chose the genus Tilia as its constituent species have toothed leaves of varied size and shape. In a previous study we extracted c.1600 leaves automatically from a set of c.1100 images. Our new algorithm locates teeth on the margins of such leaves and extracts features such as each tooth's area, perimeter and internal angles, as well as counting them. We evaluate an implementation of our algorithm's performance against a manually analyzed subset of the images. We found that the algorithm achieves an accuracy of 85% for counting teeth and 75% for estimating tooth area. We also demonstrate that the automatically extracted features are sufficient to identify different species of Tilia using a simple linear discriminant analysis, and that the features relating to teeth are the most useful.

  2. Test Tube Tooth: The Next Big Thing

    PubMed Central

    Tahir, Mohammed; Yadav, Harsh; Sureka, Rakshit; Garg, Aarti

    2016-01-01

    Unlike some vertebrates and fishes, humans do not have the capacity for tooth regeneration after the loss of permanent teeth. Although artificial replacement with removable dentures, fixed prosthesis and implants is possible through advances in the field of prosthetic dentistry, it would be ideal to recreate a third set of natural teeth to replace lost dentition. For many years now, researchers in the field of tissue engineering have been trying to bioengineer dental tissues as well as whole teeth. In order to attain a whole tooth through dental engineering, that has the same or nearly same biological, mechanical and physical properties of a natural tooth, it’s necessary to deal with all the cells and tissues which are concerned with the formation, maintenance and repair of the tooth. In this article we review the steps involved in odontogenesis or organogenesis of a tooth and progress in the bioengineering of a whole tooth. PMID:27504430

  3. West Flank Coso, CA FORGE 3D temperature model

    SciTech Connect

    Doug Blankenship

    2016-03-01

    x,y,z data of the 3D temperature model for the West Flank Coso FORGE site. Model grid spacing is 250m. The temperature model for the Coso geothermal field used over 100 geothermal production sized wells and intermediate-depth temperature holes. At the near surface of this model, two boundary temperatures were assumed: (1) areas with surface manifestations, including fumaroles along the northeast striking normal faults and northwest striking dextral faults with the hydrothermal field, a temperature of ~104˚C was applied to datum at +1066 meters above sea level elevation, and (2) a near-surface temperature at about 10 meters depth, of 20˚C was applied below the diurnal and annual conductive temperature perturbations. These assumptions were based on heat flow studies conducted at the CVF and for the Mojave Desert. On the edges of the hydrothermal system, a 73˚C/km (4˚F/100’) temperature gradient contour was established using conductive gradient data from shallow and intermediate-depth temperature holes. This contour was continued to all elevation datums between the 20˚C surface and -1520 meters below mean sea level. Because the West Flank is outside of the geothermal field footprint, during Phase 1, the three wells inside the FORGE site were incorporated into the preexisting temperature model. To ensure a complete model was built based on all the available data sets, measured bottom-hole temperature gradients in certain wells were downward extrapolated to the next deepest elevation datum (or a maximum of about 25% of the well depth where conductive gradients are evident in the lower portions of the wells). After assuring that the margins of the geothermal field were going to be adequately modelled, the data was contoured using the Kriging method algorithm. Although the extrapolated temperatures and boundary conditions are not rigorous, the calculated temperatures are anticipated to be within ~6˚C (20˚F), or one contour interval, of the

  4. Mechanisms of Tooth Eruption and Orthodontic Tooth Movement

    PubMed Central

    Wise, G.E.; King, G.J.

    2008-01-01

    Teeth move through alveolar bone, whether through the normal process of tooth eruption or by strains generated by orthodontic appliances. Both eruption and orthodontics accomplish this feat through similar fundamental biological processes, osteoclastogenesis and osteogenesis, but there are differences that make their mechanisms unique. A better appreciation of the molecular and cellular events that regulate osteoclastogenesis and osteogenesis in eruption and orthodontics is not only central to our understanding of how these processes occur, but also is needed for ultimate development of the means to control them. Possible future studies in these areas are also discussed, with particular emphasis on translation of fundamental knowledge to improve dental treatments. PMID:18434571

  5. Practical whole-tooth restoration utilizing autologous bioengineered tooth germ transplantation in a postnatal canine model

    PubMed Central

    Ono, Mitsuaki; Oshima, Masamitsu; Ogawa, Miho; Sonoyama, Wataru; Hara, Emilio Satoshi; Oida, Yasutaka; Shinkawa, Shigehiko; Nakajima, Ryu; Mine, Atsushi; Hayano, Satoru; Fukumoto, Satoshi; Kasugai, Shohei; Yamaguchi, Akira; Tsuji, Takashi; Kuboki, Takuo

    2017-01-01

    Whole-organ regeneration has great potential for the replacement of dysfunctional organs through the reconstruction of a fully functional bioengineered organ using three-dimensional cell manipulation in vitro. Recently, many basic studies of whole-tooth replacement using three-dimensional cell manipulation have been conducted in a mouse model. Further evidence of the practical application to human medicine is required to demonstrate tooth restoration by reconstructing bioengineered tooth germ using a postnatal large-animal model. Herein, we demonstrate functional tooth restoration through the autologous transplantation of bioengineered tooth germ in a postnatal canine model. The bioengineered tooth, which was reconstructed using permanent tooth germ cells, erupted into the jawbone after autologous transplantation and achieved physiological function equivalent to that of a natural tooth. This study represents a substantial advancement in whole-organ replacement therapy through the transplantation of bioengineered organ germ as a practical model for future clinical regenerative medicine. PMID:28300208

  6. The doppelganger tooth: A diagnostic conundrum!

    PubMed Central

    Dhawan, Preeti; Gaurav, Vivek; Singh, Aditi

    2015-01-01

    Abnormalities in tooth morphology and number are not uncommon. However, an exact clone of a normal tooth is a recondite clinical finding. Presence of supplementary teeth is mostly noticed in maxillary anterior, molar or premolar region, followed by mandibular premolar region in descending order of its site of occurrence. Supplemental tooth in mandibular anterior has a low prevalence of 0.01%. This paper reports one such rare case of nonsyndromic incisive jumeaux in mandibular anterior region during mixed dentition period. PMID:26097343

  7. The doppelganger tooth: A diagnostic conundrum!

    PubMed

    Dhawan, Preeti; Gaurav, Vivek; Singh, Aditi

    2015-01-01

    Abnormalities in tooth morphology and number are not uncommon. However, an exact clone of a normal tooth is a recondite clinical finding. Presence of supplementary teeth is mostly noticed in maxillary anterior, molar or premolar region, followed by mandibular premolar region in descending order of its site of occurrence. Supplemental tooth in mandibular anterior has a low prevalence of 0.01%. This paper reports one such rare case of nonsyndromic incisive jumeaux in mandibular anterior region during mixed dentition period.

  8. Tooth fragment reattachment: An esthetic, biological restoration

    PubMed Central

    Choudhary, Ajay; Garg, Rakesh; Bhalla, Anindya; Khatri, Rohit Kumar

    2015-01-01

    Coronal fractures of the anterior teeth are a common form of dental trauma. If the original tooth fragment is retained following fracture, reattachment of the fractured fragment to the remaining tooth can provide better and long lasting esthetics, improved function, a positive psychological response, and is a faster and less complicated procedure. This paper reports on coronal tooth fracture case that was successfully treated using adhesive reattachment of fractured fragment and post placement. PMID:25810662

  9. Initial tooth movement: force application and pain--a relationship?

    PubMed

    Jones, M L; Richmond, S

    1985-08-01

    Initial dental casts of 24 patients, who had previously completed a discomfort index card for the first 16 days following placement of a fixed appliance, were examined. A method is described whereby the anterior and overall crowding in the relevant dental arch was measured as a tooth/arch discrepancy index using the reflex metrograph. The crowding was measured in three dimensions as the discrepancy between the sum of the anatomic mesiodistal widths of the teeth and the actual mean arch shape canine to canine (3 to 3) and first molar to first molar (6 to 6) inclusive. An additional two-dimensional method using the best "goodness of fit" (least variance) of a parabolic arch shape for the mean arch length in the 6 to 6 crowding measurement is also described. The measurement accuracy of the reflex plotter was less than 0.12 mm. The method error for the crowding measurements expressed as root mean square (RMS) values was 0.97 mm for the anterior tooth/arch, 1.45 mm for the overall tooth/arch discrepancies, and 1.35 mm for the tooth/arch discrepancy based on the best fit of a parabolic curve. It is proposed that since the same bracket width and fully engaged arch wire type were used in every case, some relationship between the initial crowding that reflected the forces applied and the discomfort experienced by the patients might be expected. This was not found to be true. There was no correlation between the total discomfort experienced and the crowding measurements 3 to 3 or 6 to 6.(ABSTRACT TRUNCATED AT 250 WORDS)

  10. Bathymetry of the southwest flank of Mauna Loa Volcano, Hawaii

    USGS Publications Warehouse

    Chadwick, William W.; Moore, James G.; Fox, Christopher G.

    1994-01-01

    Much of the seafloor topography in the map area is on the southwest submarine flank of the currently active Mauna Loa Volcano. The benches and blocky hills shown on the map were shaped by giant landslides that resulted from instability of the rapidly growing volcano. These landslides were imagined during a 1986 to 1991 swath sonar program of the United States Hawaiian Exclusive Economic Zone, a cooperative venture by the U.S. Geological Survey and the British Institute of Oceanographic Sciences (Lipman and others, 1988; Moore and others, 1989). Dana Seamount (and probably also the neighboring Day Seamount) are apparently Cretaceous in age, based on paleomagnetic studies, and predate the growth of the Hawaiian Ridge volcanoes (Sager and Pringle, 1990).

  11. Microsatellite flanking region similarities among different loci within insect species.

    PubMed

    Meglécz, E; Anderson, S J; Bourguet, D; Butcher, R; Caldas, A; Cassel-Lundhagen, A; d'Acier, A C; Dawson, D A; Faure, N; Fauvelot, C; Franck, P; Harper, G; Keyghobadi, N; Kluetsch, C; Muthulakshmi, M; Nagaraju, J; Patt, A; Péténian, F; Silvain, J-F; Wilcock, H R

    2007-04-01

    Although microsatellites are ubiquitous in eukaryota, the number of available markers varies strongly among taxa. This meta-analysis was conducted on 32 insect species. Sequences were obtained from two assembled whole genomes, whole genome shotgun (WGS) sequences from 10 species and screening partial genomic libraries for microsatellites from 23 species. We have demonstrated: (1) strong differences in the abundance of microsatellites among species; (2) that microsatellites within species are often grouped into families based on similarities in their flanking sequences; (3) that the proportion of microsatellites grouped into families varies strongly among taxa; and (4) that microsatellite families were significantly more often associated with transposable elements - or their remnants - than unique microsatellite sequences.

  12. Tooth brushing inhibits oral bacteria in dogs.

    PubMed

    Watanabe, Kazuhiro; Hayashi, Kotaro; Kijima, Saku; Nonaka, Chie; Yamazoe, Kazuaki

    2015-10-01

    In this study, scaling, polishing and daily tooth brushing were performed in 20 beagle dogs, and the number of oral bacteria was determined using a bacterial counter. The dogs were randomized into the scaling (S), scaling + polishing (SP), scaling + tooth daily brushing (SB) and scaling + polishing + tooth daily brushing (SPB) groups. Samples were collected from the buccal surface of the maxillary fourth premolars of the dogs immediately after scaling and every week thereafter from weeks 1 to 8. Throughout the study, the number of bacteria was significantly lower in the SB and SPB groups compared with the S group. The findings suggest that daily tooth brushing inhibited oral bacterial growth in the dogs.

  13. Pore Pressure Distribution and Flank Instability in Hydrothermally Altered Stratovolcanoes

    NASA Astrophysics Data System (ADS)

    Ball, J. L.; Taron, J.; Hurwitz, S.; Reid, M. E.

    2015-12-01

    Field and geophysical investigations of stratovolcanoes with long-lived hydrothermal systems commonly reveal that initially permeable regions (such as brecciated layers of pyroclastic material) can become both altered and water-bearing. Hydrothermal alteration in these regions, including clay formation, can turn them into low-permeability barriers to fluid flow, which could increase pore fluid pressures resulting in flank slope instability. We examined elevated pore pressure conditions using numerical models of hydrothermal flow in stratovolcanoes, informed by geophysical data about internal structures and deposits. Idealized radially symmetric meshes were developed based on cross-sectional profiles and alteration/permeability structures of Cascade Range stratovolcanoes. We used the OpenGeoSys model to simulate variably saturated conditions in volcanoes heated only by regional heat fluxes, as well as 650°C intrusions at two km depth below the surface. Meteoric recharge was estimated from precipitation rates in the Cascade Range. Preliminary results indicate zones of elevated pore pressures form: 1) where slopes are underlain by continuous low-permeability altered layers, or 2) when the edifice has an altered core with saturated, less permeable limbs. The first scenario might control shallow collapses on the slopes above the altered layers. The second could promote deeper flank collapses that are initially limited to the summit and upper slopes, but could progress to the core of an edifice. In both scenarios, pore pressures can be further elevated by shallow intrusions, or evolve over longer time scales under forcing from regional heat flux. Geometries without confining low-permeability layers do not show these pressure effects. Our initial scenarios use radially symmetric models, but we are also simulating hydrothermal flow under real 3D geometries with asymmetric subsurface structures (Mount Adams). Simulation results will be used to inform 3D slope

  14. Evidence of Multiple Flank Collapse at Volcan Baru, Panama

    NASA Astrophysics Data System (ADS)

    Herrick, J. A.; Rose, W. I.

    2009-12-01

    Michigan Tech's Peace Corps Master's International program (PCMI) in Geological Hazards has enabled several long-term investigations of active volcanoes in Latin America. To contribute to volcanic hazard assessments in Panama and achieve the goals defined by the PCMI program, we developed this debris avalanche project to address outstanding questions regarding Volcan Baru's most devastating event - massive slope failure of the western flank. Relying on basic mapping tools as well as the 2007 USGS Open-File Report focusing on hazard assessments of Panama's youngest and potentially active volcano, identification of the debris avalanche deposits (DAD) required detailed field investigations to determine the limits of the units. Extending across an area larger than 600 km2, field strategies were developed based on outcrop exposures within drainages and road-cuts. Aerial photos and DEMs of Baru's nested craters were interpreted by earlier scientists as the remains of two collapsed flanks. The results from in-depth field traverses provide several important discoveries: paleosols and sharp contacts within the stratigraphy indicate multiple DAD, deeply weathered hummocks red-flag the deposits more than 50-km away from Baru's crater, and high-quality radiocarbon samples (up to 45-cm long fragments of entrained wood) lie in the distal reaches of the debris flow area. During the 2008-2009 field seasons, we received assistance from the University of Panama, Civil Protection, and Panama's National Institute of Geography. Support from local experts and feedback from professional scientists of the Smithsonian Institution and Costa Rica's Institute of Electricity were invaluable. The 2-year investment in volcanic hazard studies has brought together resources from several countries as well as fresh data that will benefit the residents and emergency management officials of Panama. Jigsaw fractured clasts lie within Volcan Baru's debris avalanche deposits more than 28 km south of the

  15. Erosion of Terrestrial Rift Flank Topography: A Quantitative Study

    NASA Technical Reports Server (NTRS)

    Weissel, Jeffrey K.

    1999-01-01

    Many rifted or passive continental margins feature a seaward-facing erosional escarpment which abruptly demarcates deeply weathered, low relief, interior uplands from a deeply incised, high relief coastal zone. It is generally accepted that these escarpments originate at the time of continental rifting and propagate inland through the elevated rift flank topography at rates on the order of 1 km/Myr over the course of a margin's history. Considering the length of passive margins worldwide and an average rift flank plateau height of several hundred meters, it is clear that sediment eroded from passive margins is an important component of the mass flux from continents to oceans through geologic time. The overall goal of the research reported here is to develop a quantitative understanding of the kinematics of escarpment propagation across passive margins and the underlying geological processes responsible for this behavior. Plateau-bounding escarpments in general exhibit two basic forms depending on the direction of surface water drainage on the plateau interior relative to the escarpment. Where surface water flows away from the escarpment, the escarpment takes the form of subdued embayments and promontories, such that its overall trend remains fairly straight as it evolves with time. Where upland streams flow across the escarpment, it takes the form of dramatic, narrow gorges whose heads appear to propagate up the plateau drainage systems as large-scale knickpoints. From work on the Colorado Plateau, Schmidt (1987) noted that the Colorado River is located much closer to the Grand Canyon's south rim, a drainage divide escarpment, than to the north rim, which is a gorge-like escarpment. The main implication is that the gorge-like form might be associated with higher long-term average erosion rates compared to the drainage divide escarpment type.

  16. Linguistic Theory and Actual Language.

    ERIC Educational Resources Information Center

    Segerdahl, Par

    1995-01-01

    Examines Noam Chomsky's (1957) discussion of "grammaticalness" and the role of linguistics in the "correct" way of speaking and writing. It is argued that the concern of linguistics with the tools of grammar has resulted in confusion, with the tools becoming mixed up with the actual language, thereby becoming the central…

  17. The unicorn and the narwhal: a tale of the tooth.

    PubMed

    Christen, Arden G; Christen, Joan A

    2011-01-01

    From as far back as the early Roman era, detailed descriptions and artistic images of the unicorn have been imagined. In Europe, the Mediterranean and the Far East, this creature became accepted as real. Although such an animal had never actually been seen, it was said to have the appearance of a horse, the beard and cloven hooves of a goat, the tail of a lion, and a single, spear-like horn protruding from the center of its forehead. The unicorn myth originated shortly after unidentified horn-like objects, from six to ten feet long, began to appear in ancient European marketplaces. Physicians quickly ascribed outlandish healing properties to these horns, pulverizing them for the treatment of various diseases. In 1638, a Danish zoologist challenged these claims and provided evidence that the so-called "unicorn horn" was actually the tusk (tooth) of the narwhal from the Arctic seas. However, his findings remained unheeded for the next 100 years. This paper explains how the myth of the unicorn and the purported powers contained within the substance of its magical horn evolved from the ages-old spoils of the Arctic fishing trade, where the narwhal was primarily speared for food and secondarily, for the export value of its ivory tusk. This unusually long, pointed and protruding single tooth, which breaks through the upper lip and the left jaw of each male narwhal, became a highly valuable commodity over the following centuries, due to its believed supernatural origins and curative qualities.

  18. Esthesioneuroblastoma presenting as tooth pain.

    PubMed

    Devi, Parvathi; Bhavle, Radhika; Aggarwal, Avanti; Walia, Cherry

    2014-09-01

    Esthesioneuroblastoma, also called olfactory neuroblastoma, is a rare malignant tumor originating in the olfactory epithelium in the upper nasal cavity with intracranial extension and may also be associated with secondary sinus diseases. Esthesioneuroblastoma has been observed to cause death by distant metastasis or by invasion through the cribriform plate and secondary meningitis. It usually produces nasal obstruction, epistaxis and less commonly anosmia, headache and pain. We report a case of esthesioneuroblastoma in a 50-year-old female who reported with tooth pain as a presenting symptom.

  19. Proteoglycans and orthodontic tooth movement.

    PubMed

    Waddington, R J; Embery, G

    2001-12-01

    Proteoglycans represent an important and diverse family of extracellular matrix components within the connective tissues of the periodontium. This review focuses on the function and metabolism of the various proteoglycans in periodontal tissues, such as alveolar bone and periodontal ligament, and considers their potential fate in response to an orthodontic force. Such considerations provide an important background in evaluating the potential for proteoglycan metabolites, alongside other connective tissue metabolites, as biomarkers for assessing the deep-seated metabolic changes and as a diagnostic tool in monitoring orthodontic tooth movement.

  20. [Tooth erosion - a multidisciplinary approach].

    PubMed

    Strużycka, Izabela; Rusyan, Ewa; Bogusławska-Kapała, Agnieszka

    2016-02-01

    During the last decades, an increasingly greater interest in dental erosion has been observed in clinical dental practice, in dental public health and in dental research because prevalence of erosive tooth wear is still increasing especially in young age group of population. Erosive tooth wear is a multifactorial etiology process characterized by progressive loss of hard dental tissue. It is defined as the exogenous and/or endogenous acids dissolution of the dental tissue, without bacterial involvement. In the development of dental erosive wear, interactions are required which include chemical, biological, behavioral, diet, time, socioeconomic, knowledge, education, and general health factors. Examples of risk groups could be patients with eating disorders, like anorexia nervosa or bulimia nervosa, gastroesophageal reflux disease, chronic alcohol abuse or dependence. Special nutrition habits groups with high consumption of soft or sport drinks, special diets like vegetarian, vegan or raw food diet, the regular intake of drugs, medications and food supplements can also increase the risk for dental erosion. Comprehensive knowledge of the different risk and protective factors is a perquisite for initiating adequate preventive measures.

  1. Pediatric tooth extractions under sedoanalgesia

    PubMed Central

    Arpaci, Ayse Hande; Isik, Berrin

    2016-01-01

    Objective: The present study aims to evaluate intravenous ketamine and inhalation sedation in children, their unwanted side-effects and surgeon satisfaction. Methods: In this study, data of 922 children aged between 1-18 who underwent tooth extraction under sedoanalgesia in our department between September 2015-January 2016 were gathered and anesthesia approaches, unwanted side effects and surgical satisfaction was investigated. Postoperative recovery emergence agitation or delirium was evaluated with Watcha Behavior Scale (WBS). Results: Patients were grouped and compared according to acceptance of intravenous line placement (Group-1) or not (Group- 2). Group 1 received intravenous ketamine anesthesia (n=822), Group 2 received inhalation anesthesia with sevoflurane (n=100). Number of patients, age, weight and gender was significantly different in two groups. When side effects were investigated nausea was observed in 30 patients (3.6%), skin rashes were observed in 26 patients (3.2%) in Group-1 while skin rashes were observed in one patient (1%) in Group 2. 95% of surgeons reported intravenous anesthesia, 18% of surgeons reported inhalation anesthesia to be the anesthesia of choice. Emergence of postoperative recovery agitation (WBS≥3) was observed more frequent in Group 2 (p<0.05) than Group 1. Conclusion: Ketamine, which has analgesic, hypnotic and amnestic effects and which does not alter pharyngeal and laryngeal reflexes thus minimizes aspiration possibility, is a safe and effective anesthetic agent for tooth extractions of the pediatric population under sedoanalgesia. PMID:27882039

  2. Tooth whitening: facts and fallacies.

    PubMed

    Heymann, H O

    2005-04-23

    Since the introduction of nightguard vital bleaching (tray bleaching) in 1989, dentistry has witnessed an astronomical rise in the interest in tooth whitening.(1) As a result, the most frequently asked question is, 'what bleaching technique works best?' Virtually all of today's whitening approaches work, because bleach is bleach. Whether a nightguard bleach is used with only 10% carbamide peroxide (which contains only 3% hydrogen peroxide), over-the-counter (OTC) whitening strips are applied containing 6% hydrogen peroxide, or an in-office bleach is employed using 25-35% hydrogen peroxide, the end results can potentially be the same. Similarity of results is possible because the mechanism of action is the same: oxidation of organic pigments or chromogens in the tooth. Granted, some bleaching approaches are more expeditious than others, owing to differences in concentration or exposure time. But as just noted, the most important factors in the efficacy of any bleaching treatment are concentration of the bleaching agent and duration of the exposure time.

  3. Age of an Indonesian Fossil Tooth Determined by Electron Paramagnetic Resonance

    SciTech Connect

    Bogard, JS

    2004-04-07

    The first fossil hominid tooth recovered during 1999 excavations from the Cisanca River region in West Java, Indonesia, was associated with a series of bovid teeth from a single individual that was recovered 190 cm beneath the hominid tooth. The age of the fossil bovid teeth was determined using electron paramagnetic resonance (EPR) analysis as part of an effort to bracket the age of the hominid tooth. The EPR-derived age of the bovid teeth is (5.16 {+-} 2.01) x 10{sup 5} years. However, the age estimate reported here is likely an underestimate of the actual age of deposition since evidence of heating was detected in the EPR spectra of the bovid teeth, and the heating may have caused a decrease in the intensity of EPR components on which the age calculation is based.

  4. Investigation of EPR signals on tooth enamel

    NASA Astrophysics Data System (ADS)

    Pavlenko, A.; Mironova-Ulmane, N.; Polakov, M.; Riekstina, D.

    2007-12-01

    Calcified tissues are involved in continues metabolic process in human organism exchanging a number of chemical elements with environment. The rate of biochemical reactions is tissue dependent and the slowest one at the tooth enamel, the most mineralized tissue of human organism. The long time stability and unique chemical composition make tooth enamel suitable for number of application. The assessment of individual radiation dose by Electron Paramagnetic Resonance (EPR) and evaluations of elemental composition by Instrumentation Neutron Activation Analysis (INAA) are the well known procedures where properties of tooth enamel intensively used. The current work is focused on investigation of EPR signals and determination of chemical composition on several teeth samples having different origin. The EPR spectra and INAA element content of milk tooth, caries tooth, and paradantose tooth have been compared to each other. The results showed that the intensity of EPR signal is much higher for the caries tooth than the for paradantose tooth that is in agreement with depleted Ca content.

  5. Addressing Tooth Decay in Head Start Children

    ERIC Educational Resources Information Center

    Knowlden, Adam P.; Hill, Lawrence F.; Alles-White, Monica L.; Cottrell, Randall R.

    2012-01-01

    Tooth decay is the most prevalent chronic disease of childhood. Oral health education and dental services are crucial to reducing the number of children afflicted with dental cavities. Due to limited access to preventative care, Head Start children are particularly vulnerable to tooth decay. This article outlines practical implications of a…

  6. Autogenous Transplantation for Replacing a Hopeless Tooth

    PubMed Central

    Zakershahrak, Mehrsa; Moshari, Amirabbas; Vatanpour, Mehdi; Khalilak, Zohreh; Jalali Ara, Afsoon

    2017-01-01

    Autogenous tooth transplantation (ATT) is a simple and reasonable choice for replacing the missing teeth when a proper donor tooth is available. This report presents a case of successful ATT of a maxillary right third molar for replacement of mandibular right second molar with a concomitant endodontic-periodontal disease. The mandibular second molar was believed to be hopeless due to a severe damage to coronal tooth structure, inappropriate root canal treatment and apical radiolucency. After extraction of mandibular second molar and maxillary third molar (the donor), the tooth was re-implanted into the extracted socket of second molar site. Root canal therapy was then performed. After 3 years, clinical and radiographic examinations revealed satisfying results, with no signs and symptoms. The patient is asymptomatic and the transplanted tooth is still functional with no signs of marginal periodontal pathosis. Radiographies showed bone regeneration in the site of previous extensive periapical lesion, normal periodontal ligament with no signs of root resorption. PMID:28179939

  7. Natural tooth as an interim prosthesis

    PubMed Central

    Dhariwal, Neha S.; Gokhale, Niraj S.; Patel, Punit; Hugar, Shivayogi M.

    2016-01-01

    A traumatic injury to primary maxillary anterior tooth is one of the common causes for problems with the succedaneous tooth leading to it noneruption. A missing anterior tooth can be psychologically and socially damaging to the patient. Despite a wide range of treatment options available, sometimes, it is inevitable to save the natural tooth. This paper describes the immediate replacement of a right central incisor using a fiber-composite resin splint with the natural tooth crown as a pontic following surgical extraction of the dilacerated impacted permanent maxillary central incisor. The abutment teeth can be conserved with minimal or no preparation, thus keeping the technique reversible and can be completed at chair side thereby avoiding laboratory costs. It can be used as an interim measure until a definitive prosthesis can be fabricated as the growth is still incomplete. PMID:27433074

  8. Biologically Based Restorative Management of Tooth Wear

    PubMed Central

    Kelleher, Martin G. D.; Bomfim, Deborah I.; Austin, Rupert S.

    2012-01-01

    The prevalence and severity of tooth wear is increasing in industrialised nations. Yet, there is no high-level evidence to support or refute any therapeutic intervention. In the absence of such evidence, many currently prevailing management strategies for tooth wear may be failing in their duty of care to first and foremost improve the oral health of patients with this disease. This paper promotes biologically sound approaches to the management of tooth wear on the basis of current best evidence of the aetiology and clinical features of this disease. The relative risks and benefits of the varying approaches to managing tooth wear are discussed with reference to long-term follow-up studies. Using reference to ethical standards such as “The Daughter Test”, this paper presents case reports of patients with moderate-to-severe levels of tooth wear managed in line with these biologically sound principles. PMID:22315608

  9. Tooth Whitening: What We Now Know

    PubMed Central

    Carey, Clifton M.

    2014-01-01

    Declarative Title Current research about tooth whitening shows that it is safe and effective when manufacturer’s protocol is followed, yet there are risks of which the profession and users should be aware. This update provides a summary of current research and assessment of the safety and efficacy of tooth whitening regimens. Background Tooth whitening has become one of the most frequently requested dental procedures by the public. The public has come to demand whiter, more perfect smiles and in response many choices for tooth whitening have been made available. These include home-based products such as toothpastes, gels, and films, as well as in-office based systems where products containing highly concentrated bleaching agents are applied under professional supervision. The profession and public have been aware of certain risks related to tooth whitening such as increased tooth sensitivity and gingival irritation. New research has shown that there are other risks such as tooth surface roughening and softening, increased potential for demineralization, degradation of dental restorations, and unacceptable color change of dental restorations. The new research is also focused on optimizing whitening procedures to reduce tooth sensitivity and to increase the persistence of the whitening. Methods Current reports in the literature are reviewed that are related to the use of peroxide based whitening methods. These reports include in vitro studies for method optimization and mechanism as well as clinical studies on effects of various whitening regimens. Conclusions When manufacturer’s instructions are followed, hydrogen peroxide and carbamide peroxide based tooth whitening is safe and effective. Patients should be informed of the risks associated with tooth whitening and instructed on identification of adverse occurrences so that they may seek professional help asneeded. PMID:24929591

  10. Asymmetric nucleosomes flank promoters in the budding yeast genome.

    PubMed

    Ramachandran, Srinivas; Zentner, Gabriel E; Henikoff, Steven

    2015-03-01

    Nucleosomes in active chromatin are dynamic, but whether they have distinct structural conformations is unknown. To identify nucleosomes with alternative structures genome-wide, we used H4S47C-anchored cleavage mapping, which revealed that 5% of budding yeast (Saccharomyces cerevisiae) nucleosome positions have asymmetric histone-DNA interactions. These asymmetric interactions are enriched at nucleosome positions that flank promoters. Micrococcal nuclease (MNase) sequence-based profiles of asymmetric nucleosome positions revealed a corresponding asymmetry in MNase protection near the dyad axis, suggesting that the loss of DNA contacts around H4S47 is accompanied by protection of the DNA from MNase. Chromatin immunoprecipitation mapping of selected nucleosome remodelers indicated that asymmetric nucleosomes are bound by the RSC chromatin remodeling complex, which is required for maintaining nucleosomes at asymmetric positions. These results imply that the asymmetric nucleosome-RSC complex is a metastable intermediate representing partial unwrapping and protection of nucleosomal DNA on one side of the dyad axis during chromatin remodeling.

  11. 3D FEM Simulation of Flank Wear in Turning

    NASA Astrophysics Data System (ADS)

    Attanasio, Aldo; Ceretti, Elisabetta; Giardini, Claudio

    2011-05-01

    This work deals with tool wear simulation. Studying the influence of tool wear on tool life, tool substitution policy and influence on final part quality, surface integrity, cutting forces and power consumption it is important to reduce the global process costs. Adhesion, abrasion, erosion, diffusion, corrosion and fracture are some of the phenomena responsible of the tool wear depending on the selected cutting parameters: cutting velocity, feed rate, depth of cut, …. In some cases these wear mechanisms are described by analytical models as a function of process variables (temperature, pressure and sliding velocity along the cutting surface). These analytical models are suitable to be implemented in FEM codes and they can be utilized to simulate the tool wear. In the present paper a commercial 3D FEM software has been customized to simulate the tool wear during turning operations when cutting AISI 1045 carbon steel with uncoated tungsten carbide tip. The FEM software was improved by means of a suitable subroutine able to modify the tool geometry on the basis of the estimated tool wear as the simulation goes on. Since for the considered couple of tool-workpiece material the main phenomena generating wear are the abrasive and the diffusive ones, the tool wear model implemented into the subroutine was obtained as combination between the Usui's and the Takeyama and Murata's models. A comparison between experimental and simulated flank tool wear curves is reported demonstrating that it is possible to simulate the tool wear development.

  12. Measurement accuracy and reliability of tooth length on conventional and CBCT reconstructed panoramic radiographs

    PubMed Central

    Flores-Mir, Carlos; Rosenblatt, Mark R; Major, Paul W.; Carey, Jason P.; Heo, Giseon

    2014-01-01

    INTRODUCTION: This in vivo study assessed accuracy and reliability of tooth length measurements obtained from conventional panoramic radiographs and CBCT panoramic reconstructions to that of a digital caliper (gold standard). METHODS: The sample consisted of subjects who had CBCT and conventional panoramic radiographic imaging and who required maxillary premolar extraction for routine orthodontic treatment. A total of 48 teeth extracted from 26 subjects were measured directly with digital calipers. Radiographic images were scanned and digitally measured in Dolphin 3D software. Accuracy of tooth length measurements made by CBCT panoramic reconstructions, conventional panoramic radiographs and digital caliper (gold standard) were compared to each other by repeated measures one-way ANOVA with Bonferroni correction and by single measures intraclass correlation coefficient. RESULTS: Repeated root length measures with digital calipers, panoramic radiographs and CBCT constructed panoramic-like images were all individually highly reliable. Compared to the caliper (gold standard), tooth measurements obtained from conventional panoramic radiographs were on average 6.3 mm (SD = 2.0 mm) longer, while tooth measurements from CBCT panoramic reconstructions were an average of 1.7 mm (SD = 1.2 mm) shorter. CONCLUSIONS: In comparison to actual tooth lengths, conventional panoramic radiographs were relatively inaccurate, overestimating the lengths by 29%, while CBCT panoramic reconstructions underestimated the lengths by 4%. PMID:25715716

  13. Evaluation of MEMS-Based Wireless Accelerometer Sensors in Detecting Gear Tooth Faults in Helicopter Transmissions

    NASA Technical Reports Server (NTRS)

    Lewicki, David George; Lambert, Nicholas A.; Wagoner, Robert S.

    2015-01-01

    The diagnostics capability of micro-electro-mechanical systems (MEMS) based rotating accelerometer sensors in detecting gear tooth crack failures in helicopter main-rotor transmissions was evaluated. MEMS sensors were installed on a pre-notched OH-58C spiral-bevel pinion gear. Endurance tests were performed and the gear was run to tooth fracture failure. Results from the MEMS sensor were compared to conventional accelerometers mounted on the transmission housing. Most of the four stationary accelerometers mounted on the gear box housing and most of the CI's used gave indications of failure at the end of the test. The MEMS system performed well and lasted the entire test. All MEMS accelerometers gave an indication of failure at the end of the test. The MEMS systems performed as well, if not better, than the stationary accelerometers mounted on the gear box housing with regards to gear tooth fault detection. For both the MEMS sensors and stationary sensors, the fault detection time was not much sooner than the actual tooth fracture time. The MEMS sensor spectrum data showed large first order shaft frequency sidebands due to the measurement rotating frame of reference. The method of constructing a pseudo tach signal from periodic characteristics of the vibration data was successful in deriving a TSA signal without an actual tach and proved as an effective way to improve fault detection for the MEMS.

  14. Tooth crown heights, tooth wear, sexual dimorphism and jaw growth in hominoids.

    PubMed

    Dean, M C; Beynon, A D

    1991-01-01

    The aim of this review is to bring together data that link tooth morphology with tooth function and tooth growth: We aim to show how the microanatomy of hominoid teeth is providing evidence about rates of tooth growth that are likely to be a consequence of both masticatory strategy and social behaviour. First, we present data about incisor and molar tooth wear in wild short chimpanzees that demonstrate how crown heights are likely to be related to relative tooth use in a broad sense. Following this we review recent studies that describe the microanatomy of hominoid tooth enamel and show how these studies are providing evidence about tooth crown formation times in hominoids, as well as improving estimates for the age at death of certain juvenile fossil hominids. Next, we outline what is known about the mechanisms of tooth growth in the sexually dimorphic canine teeth of chimpanzees and compare these patterns of growth with tooth growth patterns in the canines of three fossil hominids from Laetoli, Tanzania. Finally, we discuss how selection pressures that operate to increase or reduce the size of anterior teeth interact with jaw size. We argue that the space available to grow developing teeth in the mandibles of juvenile hominoids is determined by the growth patterns of the mandibles, which in turn reflect masticatory strategy. The consequences of selection pressure to grow large or small anterior teeth are likely to be reflected in the times at which these teeth are able to emerge into occlusion.

  15. Spectroscopic investigations of carious tooth decay.

    PubMed

    Thareja, R K; Sharma, A K; Shukla, Shobha

    2008-11-01

    We report on the elemental composition of healthy and infected part of human tooth using laser induced breakdown spectroscopy (LIBS). We have used prominent constituent transitions in laser-excited tooth to diagnose the state of the tooth. A nanosecond laser pulse (355nm, 5ns) was used as an ablating pulse and the sodium (3s2S-3p2P) at 588.99 and (3s2S-3p2P) at 589.99nm, strontium (5s21S-1s5P) at 460.55nm, and calcium (3d3D-4f 3F0) at 452.55nm transitions for spectroscopic analysis. The spectroscopic observations in conjunction with discriminate analysis showed that calcium attached to the hydroxyapatite structure of the tooth was affected severely at the infected part of the tooth. The position-time plots generated from two-dimensional (2D) images conclusively showed a decrease in calcium concentration in the infected region of the irradiated tooth. Using the technique, we could distinguish between the healthy and carious parts of the tooth with significant accuracy.

  16. How People Actually Use Thermostats

    SciTech Connect

    Meier, Alan; Aragon, Cecilia; Hurwitz, Becky; Mujumdar, Dhawal; Peffer, Therese; Perry, Daniel; Pritoni, Marco

    2010-08-15

    Residential thermostats have been a key element in controlling heating and cooling systems for over sixty years. However, today's modern programmable thermostats (PTs) are complicated and difficult for users to understand, leading to errors in operation and wasted energy. Four separate tests of usability were conducted in preparation for a larger study. These tests included personal interviews, an on-line survey, photographing actual thermostat settings, and measurements of ability to accomplish four tasks related to effective use of a PT. The interviews revealed that many occupants used the PT as an on-off switch and most demonstrated little knowledge of how to operate it. The on-line survey found that 89% of the respondents rarely or never used the PT to set a weekday or weekend program. The photographic survey (in low income homes) found that only 30% of the PTs were actually programmed. In the usability test, we found that we could quantify the difference in usability of two PTs as measured in time to accomplish tasks. Users accomplished the tasks in consistently shorter times with the touchscreen unit than with buttons. None of these studies are representative of the entire population of users but, together, they illustrate the importance of improving user interfaces in PTs.

  17. Evolution of High Tooth Replacement Rates in Sauropod Dinosaurs

    PubMed Central

    Smith, Kathlyn M.; Fisher, Daniel C.; Wilson, Jeffrey A.

    2013-01-01

    Background Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. Methodology/Principal Findings We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days). Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. Conclusions/Significance Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size), and derived titanosaurs and diplodocoids independently

  18. Regenerative Applications Using Tooth Derived Stem Cells in Other Than Tooth Regeneration: A Literature Review

    PubMed Central

    Park, Yun-Jong; Cha, Seunghee; Park, Young-Seok

    2016-01-01

    Tooth derived stem cells or dental stem cells are categorized according to the location from which they are isolated and represent a promising source of cells for regenerative medicine. Originally, as one kind of mesenchymal stem cells, they are considered an alternative of bone marrow stromal cells. They share many commonalties but maintain differences. Considering their original function in development and the homeostasis of tooth structures, many applications of these cells in dentistry have aimed at tooth structure regeneration; however, the application in other than tooth structures has been attempted extensively. The availability from discarded or removed teeth can be an innate benefit as a source of autologous cells. Their origin from the neural crest results in exploitation of neurological and numerous other applications. This review briefly highlights current and future perspectives of the regenerative applications of tooth derived stem cells in areas beyond tooth regeneration. PMID:26798366

  19. Effective sealing of a disk cavity using a double-toothed rim seal

    NASA Astrophysics Data System (ADS)

    Bhavnani, S. H.; Khilnani, V. I.; Tsai, L.-C.; Khodadadi, J. M.; Goodling, J. S.; Waggott, J.

    1992-06-01

    The sealing characteristics of an advanced air-cooled turbo-expander disk cavity are examined employing laser sheet flow visualization and static pressure measurements. Tests are conducted on a simplified half-scale model of an actual low pressure turbo-expander first-stage disk cavity. The superior performance of the seal studied is confirmed by comparison with a single-toothed rim seal and a simple axial rim seal.

  20. Immediate Esthetic Rehabilitation of Periodontally Compromised Anterior Tooth Using Natural Tooth as Pontic

    PubMed Central

    Kumar, K. Pavan; Nujella, Surya Kumari; Gopal, S. Sujatha

    2016-01-01

    For patients who require removal of anterior teeth and their replacement various treatment modalities are available. With advancement in technology and availability of glass/polyethylene fibres, use of natural tooth as pontic with fibre reinforced composite restorations offers the promising results. The present case report describes management of periodontally compromised mandibular anterior tooth using natural tooth pontic with fibre reinforcement. A 1-year follow-up showed that the bridge was intact with good esthetics and no problem was reported. PMID:27195156

  1. Critical appraisal. In-office tooth whitening: pulpal effects and tooth sensitivity issues.

    PubMed

    Kwon, So Ran; Swift, Edward J

    2014-01-01

    In-office bleaching is an effective method for whitening teeth.Tooth sensitivity associated with in-office whitening is reversible and may range from mild to considerable. The incidence and severity of tooth sensitivity can be reduced by pretreatment with a desensitizer such as potassium nitrate. Histologic studies and clinical studies on long-term pulpal effects are lacking to definitively support the safety of in-office tooth whitening. Future studies on the etiology of tooth sensitivity related to whitening might greatly improve the means of preventing and managing this side effect.

  2. Recent approaches in tooth engineering research.

    PubMed

    Svandová, E; Veselá, B; Křivánek, J; Hampl, A; Matalová, E

    2014-01-01

    Tooth absence and defects caused by various reasons are frequent events in humans. They are not life threatening but may bring about social consequences. Recent dentistry provides solutions in the form of prosthetics or dental implants; however, several complications and distinct limitations favour bioengineering of dental and periodontal structures. At least two types of cells (epithelial and mesenchymal) have to be recombined to produce a new functional tooth. Moreover, the tooth must be vascularized, innervated and properly anchored in the bone. To study these issues, different approaches have been established in both basic and applied research. In this review, recent strategies and techniques of tooth engineering are comprehensively summarized and discussed, particularly regarding manipulation using stem cells.

  3. Tooth brushing inhibits oral bacteria in dogs

    PubMed Central

    WATANABE, Kazuhiro; HAYASHI, Kotaro; KIJIMA, Saku; NONAKA, Chie; YAMAZOE, Kazuaki

    2015-01-01

    In this study, scaling, polishing and daily tooth brushing were performed in 20 beagle dogs, and the number of oral bacteria was determined using a bacterial counter. The dogs were randomized into the scaling (S), scaling + polishing (SP), scaling + tooth daily brushing (SB) and scaling + polishing + tooth daily brushing (SPB) groups. Samples were collected from the buccal surface of the maxillary fourth premolars of the dogs immediately after scaling and every week thereafter from weeks 1 to 8. Throughout the study, the number of bacteria was significantly lower in the SB and SPB groups compared with the S group. The findings suggest that daily tooth brushing inhibited oral bacterial growth in the dogs. PMID:25994486

  4. Materials science: Lessons from tooth enamel

    NASA Astrophysics Data System (ADS)

    Espinosa, Horacio D.; Soler-Crespo, Rafael

    2017-03-01

    A remarkable composite material has been made that mimics the structure of tooth enamel. This achievement opens up the exploration of new composite materials and of computational methods that reliably predict their properties. See Letter p.95

  5. Robust tooth surface reconstruction by iterative deformation.

    PubMed

    Jiang, Xiaotong; Dai, Ning; Cheng, Xiaosheng; Wang, Jun; Peng, Qingjin; Liu, Hao; Cheng, Cheng

    2016-01-01

    Digital design technologies have been applied extensively in dental medicine, especially in the field of dental restoration. The all-ceramic crown is an important restoration type of dental CAD systems. This paper presents a robust tooth surface reconstruction algorithm for all-ceramic crown design. The algorithm involves three necessary steps: standard tooth initial positioning and division; salient feature point extraction using Morse theory; and standard tooth deformation using iterative Laplacian Surface Editing and mesh stitching. This algorithm can retain the morphological features of the tooth surface well. It is robust and suitable for almost all types of teeth, including incisor, canine, premolar, and molar. Moreover, it allows dental technicians to use their own preferred library teeth for reconstruction. The algorithm has been successfully integrated in our Dental CAD system, more than 1000 clinical cases have been tested to demonstrate the robustness and effectiveness of the proposed algorithm.

  6. Computer simulation of gear tooth manufacturing processes

    NASA Technical Reports Server (NTRS)

    Mavriplis, Dimitri; Huston, Ronald L.

    1990-01-01

    The use of computer graphics to simulate gear tooth manufacturing procedures is discussed. An analytical basis for the simulation is established for spur gears. The simulation itself, however, is developed not only for spur gears, but for straight bevel gears as well. The applications of the developed procedure extend from the development of finite element models of heretofore intractable geometrical forms, to exploring the fabrication of nonstandard tooth forms.

  7. [A case of xanthogranulomatous pyelonephritis presenting with the flank subcutaneous mass].

    PubMed

    Masuda, H; Nobuhisa, S; Ueda, H; Katsuoka, Y; Okano, H

    2000-05-01

    A 51-year-old female exhibited fever, left flank pain and left flank mass in March, 1993. Drip infusion pyelography (DIP) revealed a non-functioning left kidney with shadows of calculi, and abdominal computerized tomography (CT) showed renal calculi and multilocular cystic lesions in the left kidney extending through the perinephric space into the mass on the left flank. Percutaneous nephrostomy and percutaneous drainage were performed, followed by left nephrectomy. Histopathological findings revealed xanthogranulomatous pyelonephritis. There have been a few case reports of xanthogranulomatous pyelonephritis forming nephrocutaneous fistula in the back.

  8. Ovariectomy by left flank approach in prepubertal Nelore (Bos indicus) heifers

    PubMed Central

    Peiró, Juliana R.; Nogueira, Geison M.; Nogueira, Guilherme P.; Perri, Silvia H.V.; Cardoso, Daniel

    2009-01-01

    The main objective of this study was to evaluate a recumbent left flank approach to bilateral ovariectomy in prepubertal heifers and to develop an optimal surgical technique for this procedure. Both ovaries were removed from 6 Nelore heifers by left flank approach without any complications, except in 1 heifer, which was believed to have had only 1 ovary based on ultrasound and exploration during surgery, but was later found to have a remaining functional ovary. Ovariectomy via left flank approach in recumbent prepubertal heifers is feasible and technically easy. This procedure does not involve special instrumentation and, despite the invasive approach, it allows optimal visualization of the ovaries and uterus. PMID:19794897

  9. A method for amplification of unknown flanking sequences based on touchdown PCR and suppression-PCR.

    PubMed

    Gao, Song; He, Dan; Li, Guangquan; Zhang, Yanhua; Lv, Huiying; Wang, Li

    2016-09-15

    Thermal asymmetric staggered PCR is the most widely used technique to obtain the flanking sequences. However, it has some limitations, including a low rate of positivity, and complex operation. In this study, a improved method of it was made based on suppression-PCR and touchdown PCR. The PCR fragment obtained by the amplification was used directly for sequencing after gel purification. Using this improved method, the positive rate of amplified flanking sequences of the ATMT mutants reached 99%. In addition, the time from DNA extraction to flanking sequence analysis was shortened to 2 days with about 6 dollars each sample.

  10. The actual goals of geoethics

    NASA Astrophysics Data System (ADS)

    Nemec, Vaclav

    2014-05-01

    The most actual goals of geoethics have been formulated as results of the International Conference on Geoethics (October 2013) held at the geoethics birth-place Pribram (Czech Republic): In the sphere of education and public enlightenment an appropriate needed minimum know how of Earth sciences should be intensively promoted together with cultivating ethical way of thinking and acting for the sustainable well-being of the society. The actual activities of the Intergovernmental Panel of Climate Changes are not sustainable with the existing knowledge of the Earth sciences (as presented in the results of the 33rd and 34th International Geological Congresses). This knowledge should be incorporated into any further work of the IPCC. In the sphere of legislation in a large international co-operation following steps are needed: - to re-formulate the term of a "false alarm" and its legal consequences, - to demand very consequently the needed evaluation of existing risks, - to solve problems of rights of individuals and minorities in cases of the optimum use of mineral resources and of the optimum protection of the local population against emergency dangers and disasters; common good (well-being) must be considered as the priority when solving ethical dilemmas. The precaution principle should be applied in any decision making process. Earth scientists presenting their expert opinions are not exempted from civil, administrative or even criminal liabilities. Details must be established by national law and jurisprudence. The well known case of the L'Aquila earthquake (2009) should serve as a serious warning because of the proven misuse of geoethics for protecting top Italian seismologists responsible and sentenced for their inadequate superficial behaviour causing lot of human victims. Another recent scandal with the Himalayan fossil fraud will be also documented. A support is needed for any effort to analyze and to disclose the problems of the deformation of the contemporary

  11. High-efficiency tooth bleaching using non-thermal atmospheric pressure plasma with low concentration of hydrogen peroxide

    PubMed Central

    NAM, Seoul Hee; LEE, Hyun Woo; CHO, Soo Hyun; LEE, Jae Koo; JEON, Young Chan; KIM, Gyoo Cheon

    2013-01-01

    Light-activated tooth bleaching with a high hydrogen peroxide (HP; H2O2) concentration has risks and the actual role of the light source is doubtful. The use of conventional light might result in an increase in the temperature and cause thermal damage to the health of the tooth tissue. Objective: This study investigated the efficacy of tooth bleaching using non-thermal atmospheric pressure plasma (NAPP) with 15% carbamide peroxide (CP; CH6N2O3) including 5.4% HP, as compared with conventional light sources. Material and Methods: Forty human teeth were randomly divided into four groups: Group I (CP+NAPP), Group II (CP+plasma arc lamp; PAC), Group III (CP+diode laser), and Group IV (CP alone). Color changes (ΔE ) of the tooth and tooth surface temperatures were measured. Data were evaluated by one-way analysis of variance (ANOVA) and post-hoc Tukey's tests. Results: Group I showed the highest bleaching efficacy, with a ΔE value of 1.92-, 2.61 and 2.97-fold greater than those of Groups II, III and IV, respectively (P<0.05). The tooth surface temperature was maintained around 37ºC in Group I, but it reached 43ºC in Groups II and III. Conclusions: The NAPP has a greater capability for effective tooth bleaching than conventional light sources with a low concentration of HP without causing thermal damage. Tooth bleaching using NAPP can become a major technique for in-office bleaching in the near future. PMID:23857658

  12. Adhesion of Dental Materials to Tooth Structure

    NASA Astrophysics Data System (ADS)

    Mitra, Sumita B.

    2000-03-01

    The understanding and proper application of the principles of adhesion has brought forth a new paradigm in the realm of esthetic dentistry. Modern restorative tooth procedures can now conserve the remaining tooth-structure and also provide for the strengthening of the tooth. Adhesive restorative techniques call for the application and curing of the dental adhesive at the interface between the tooth tissue and the filling material. Hence the success of the restoration depends largely on the integrity of this interface. The mechanism of adhesion of the bonding materials to the dental hard tissue will be discussed in this paper. There are four main steps that occur during the application of the dental adhesive to the oral hard tissues: 1) The first step is the creation of a microstructure in the tooth enamel or dentin by means of an acidic material. This can be through the application of a separate etchant or can be accomplished in situ by the adhesive/primer. This agent has to be effective in removing or modifying the proteinaceous “smear” layer, which would otherwise act as a weak boundary layer on the surface to be bonded. 2) The primer/adhesive must then be able to wet and penetrate the microstructure created in the tooth. Since the surface energies of etched enamel and that of etched dentin are different finding one material to prime both types of dental tissues can be quite challenging. 3) The ionomer types of materials, particularly those that are carboxylate ion-containing, can chemically bond with the calcium ions of the hydroxyapatite mineral. 4) Polymerization in situ allows for micromechanical interlocking of the adhesive. The importance of having the right mechanical properties of the cured adhesive layer and its role in absorbing and dissipating stresses encountered by a restored tooth will also be discussed.

  13. [Imaging modalities and therapy options in patients with acute flank pain].

    PubMed

    Grosse, A; Grosse, C

    2014-07-01

    The objective of this article is the description of imaging techniques for the evaluation of patients with acute flank pain and suspicion of urolithiasis and the impact of these techniques in the therapy management of patients with calculi.

  14. Complete mitochondrial genome sequence of Chestnut-flanked white-eye (Zosterops erythropleurus).

    PubMed

    Li, Yumei; Yao, Jiyuan; Zhao, Xin; Li, Lingyu; Yan, Shouqing

    2016-09-01

    The Chestnut-flanked white-eye (Zosterops erythropleurus) is a species of family Zosteropidae, which is distributed widely in the world. In the present study, the complete mitochondrial genome sequence of Chestnut-flanked white-eye was determined. It has a total length of 17 811 bp, and contains 13 protein-coding genes, 22 tRNA genes, 2 ribosome RNA genes and 2 control regions. The total base composition was 30.2% for A, 31.0% for C, 14.2% for G and 24.6% for T. The phylogenetic tree of Chestnut-flanked white-eye and 13 other species belonging to the order Passeriformes was built. The molecular data presented here will be useful to study the evolutionary relationships and genetic diversity of Chestnut-flanked white-eye.

  15. Window type: 2x3 fixed multipaned steel window flanked by 1x3 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: 2x3 fixed multipaned steel window flanked by 1x3 multipaned steel casements. Concrete sill and spandrel also illustrated. Building 43, facing east - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  16. Effect of flanking bases on quadruplex stability and Watson-Crick duplex competition.

    PubMed

    Arora, Amit; Nair, Divya R; Maiti, Souvik

    2009-07-01

    Guanine-rich DNA sequences have the ability to fold into four-stranded structures called G-quadruplexes, and are considered as promising anticancer targets. Although the G-quadruplex structure is composed of quartets and interspersed loops, in the genome it is also flanked on each side by numerous bases. The effect of loop length and composition on quadruplex conformation and stability has been well investigated in the past, but the effect of flanking bases on quadruplex stability and Watson-Crick duplex competition has not been addressed. We have studied in detail the effect of flanking bases on quadruplex stability and on duplex formation by the G-quadruplex in the presence of complementary strands using the quadruplex-forming sequence located in the promoter region of the c-kit oncogene. The results obtained from CD, thermal difference spectrum and UV melting demonstrated the effect of flanking bases on quadruplex structure and stability. With the increase in flank length, the increase in the more favorable DeltaH(vH) is accompanied by a striking increase in the unfavorable DeltaS(vH), which resulted in a decrease in the overall DeltaG(vH) of quadruplex formation. Furthermore, CD, fluorescence and isothermal titration calorimetry studies demonstrated that the propensity to attain quadruplex structure decreases with increasing flank length.

  17. The evolution of dinosaur tooth enamel microstructure.

    PubMed

    Hwang, Sunny H

    2011-02-01

    The evolution of tooth enamel microstructure in both extinct and extant mammalian groups has been extensively documented, but is poorly known in reptiles, including dinosaurs. Previous intensive sampling of dinosaur tooth enamel microstructure revealed that: (1) the three-dimensional arrangement of enamel types and features within a tooth-the schmelzmuster-is most useful in diagnosing dinosaur clades at or around the family level; (2) enamel microstructure complexity is correlated with tooth morphology complexity and not necessarily with phylogenetic position; and (3) there is a large amount of homoplasy within Theropoda but much less within Ornithischia. In this study, the examination of the enamel microstructure of 28 additional dinosaur taxa fills in taxonomic gaps of previous studies and reinforces the aforementioned conclusions. Additionally, these new specimens reveal that within clades such as Sauropodomorpha, Neotheropoda, and Euornithopoda, the more basal taxa have simpler enamel that is a precursor to the more complex enamel of more derived taxa and that schmelzmusters evolve in a stepwise fashion. In the particularly well-sampled clade of Euornithopoda, correlations between the evolution of dental and enamel characters could be drawn. The ancestral schmelzmuster for Genasauria remains ambiguous due to the dearth of basal ornithischian teeth available for study. These new specimens provide new insights into the evolution of tooth enamel microstructure in dinosaurs, emphasizing the importance of thorough sampling within broadly inclusive clades, especially among their more basal members.

  18. [Growth factors in human tooth development].

    PubMed

    Bellone, C; Barni, T; Pagni, L; Balboni, G C; Vannelli, G B

    1990-03-01

    Our research concerns the immunohistochemical localization of EGF and IGF-I receptors in the tooth germ, using monoclonal antibodies. The results show that in the early phases of human tooth development EGF and IGF-I receptors are present. At bud stage both receptors are localized at dental laminae level, in some epithelial cells of the tooth bud and in some mesenchymal cells. At cap stage the receptors are present in the outer and inner enamel epithelium, and in some cells of stellate reticulum. As far as concerns the mesenchymal cells, some cells of dental papilla in contact with enamel organ, are intensely positive. The immunopositivity is present also in some mesenchymal cells at follicular level. At late cap stage and at early bell stage receptors are not present at inner enamel epithelium level but they can be detectable in the mesenchyma of dental papilla and in some cells of the follicle. On the basis of these results it may be hypothesized that EGF and IGF-I can act as growth factors in the modulation of cellular proliferation and differentiation during the human tooth morphogenesis. Moreover, it is possible that these substances can play a role in the mesenchymal-epithelial interaction in the developing human tooth.

  19. Detecting Tooth Damage in Geared Drive Trains

    NASA Technical Reports Server (NTRS)

    Nachtsheim, Philip R.

    1997-01-01

    This paper describes a method that was developed to detect gear tooth damage that does not require a priori knowledge of the frequency characteristic of the fault. The basic idea of the method is that a few damaged teeth will cause transient load fluctuations unlike the normal tooth load fluctuations. The method attempts to measure the energy in the lower side bands of the modulated signal caused by the transient load fluctuations. The method monitors the energy in the frequency interval which excludes the frequency of the lowest dominant normal tooth load fluctuation and all frequencies above it. The method reacted significantly to the tooth fracture damage results documented in the Lewis data sets which were obtained from tests of the OH-58A transmission and tests of high contact ratio spiral bevel gears. The method detected gear tooth fractures in all four of the high contact ratio spiral bevel gear runs. Published results indicate other detection methods were only able to detect faults for three out of four runs.

  20. Mathematical models for the synthesis and optimization of spiral bevel gear tooth surfaces. [for helicopter transmissions

    NASA Technical Reports Server (NTRS)

    Litvin, F. L.; Rahman, P.; Goldrich, R. N.

    1982-01-01

    The geometry of spiral bevel gears and to their rational design are studied. The nonconjugate tooth surfaces of spiral bevel gears are, in theory, replaced (or approximated) by conjugated tooth surfaces. These surfaces can be generated by two conical surfaces, and by a conical surface and a revolution. Although these conjugated tooth surfaces are simpler than the actual ones, the determination of their principal curvatures and directions is still a complicated problem. Therefore, a new approach, to the solution of these is proposed. Direct relationships between the principal curvatures and directions of the tool surface and those of the generated gear surface are obtained. With the aid of these analytical tools, the Hertzian contact problem for conjugate tooth surfaces can be solved. These results are useful in determining compressive load capacity and surface fatigue life of spiral bevel gears. A general theory of kinematical errors exerted by manufacturing and assembly errors is developed. This theory is used to determine the analytical relationship between gear misalignments and kinematical errors. This is important to the study of noise and vibration in geared systems.

  1. Nuclear-chemical methods in a hard tooth tissue abrasion study

    NASA Astrophysics Data System (ADS)

    Gosman, A.; Spěváček, V.; Koníček, J.; Vopálka, D.; Houŝová, D.; Doležalová, L.

    1999-01-01

    The advanced method consists in implantation—labelling of the thin surface layers of the solid objects, e.g. hard tooth tissue, by atoms of suitable natural or artificial radionuclides. Nuclides from the uranium series were implanted into the surface by using nuclear recoil effect at alpha decay of 226Ra to 222Rn, alpha decay of 222Rn to RaA, alpha decay of RaA to RaB (beta-emitter) and further alpha or beta emitters. With regard to chosen alpha detection and to the half—lives of the radionuclides, there was actually measured the activity of 222Rn, RaA and RaC’ in the thin surface layer. This was followed by the laboratory simulation of the abrasion in the system of “toothbrush—various suspensions of the tooth-pastes—hard tooth tissue (or material standard—ivory)” in specially designed device—the dentoabrasionmeter. The activities of the tissue surface measured before and after abrasion were used for calculations of the relative drop of the surface activity. On this basis the influence of various tooth-pastes containing various abrasive substances was determined.

  2. Dose rate assessment in tooth enamel

    NASA Astrophysics Data System (ADS)

    Wieser, A.; Göksu, H. Y.; Regulla, D. F.; Vogenauer, A.

    A mammoth found in the southern part of Germany was dated by ESR spectroscopy. This dating method is based on the measurement of the accumulated dose in tooth enamel and assessment of the annual dose. The accumulated dose is obtained from the radiation induced ESR signal at g = 2.0018 of the enamel. The annual dose was first determined by measuring the 238U, 232Th and 40K content of the tooth and of the surrounding soil. As a crosscheck, the dose rate from the tooth was measured by inserting TL dosimeters in the dentine and storing them at 'zero' background in a salt mine. The cosmic dose rate and the gamma dose rate from the soil was evaluated from TL dosimeters buried at the excavation site. The results are discussed with respect to the applicability of ESR dating on teeth.

  3. Tooth-derived bone graft material

    PubMed Central

    Kim, Young-Kyun; Lee, Junho; Kim, Kyung-Wook; Murata, Masaru; Akazawa, Toshiyuki; Mitsugi, Masaharu

    2013-01-01

    With successful extraction of growth factors and bone morphogenic proteins (BMPs) from mammalian teeth, many researchers have supported development of a bone substitute using tooth-derived substances. Some studies have also expanded the potential use of teeth as a carrier for growth factors and stem cells. A broad overview of the published findings with regard to tooth-derived regenerative tissue engineering technique is outlined. Considering more than 100 published papers, our team has developed the protocols and techniques for processing of bone graft material using extracted teeth. Based on current studies and studies that will be needed in the future, we can anticipate development of scaffolds, homogenous and xenogenous tooth bone grafts, and dental restorative materials using extracted teeth. PMID:24471027

  4. Tooth-on-tooth interlocking occlusion suggests macrophagy in the mesozoic marine crocodylomorph dakosaurus.

    PubMed

    Young, Mark T; Brusatte, Stephen L; Beatty, Brian L; De Andrade, Marco Brandalise; Desojo, Julia B

    2012-07-01

    Metriorhynchidae was a peculiar but long-lived group of marine Mesozoic crocodylomorphs adapted to a pelagic lifestyle. Recent discoveries show that metriorhynchids evolved a wide range of craniodental morphotypes and inferred feeding strategies. One genus, Dakosaurus, is arguably the most aberrant marine crocodylomorph due to its large, robust, ziphodont teeth; very low tooth count; and brevirostrine/oreinirostral snout. We here report an additional unusual feature of Dakosaurus that is unique among marine crocodylomorphs: tightly fitting tooth-to-tooth occlusion, whose inference is supported by reception pits along the upper and lower tooth rows, indicative of vertically orientated crowns that were in close contact during occlusion, and three distinct types of dental wear. These include irregular spalled surfaces near the apex (probably caused by tooth-food contact), semi-circular wear near the base, and elongate surfaces extending along the mesial and distal margins of the teeth, obliterating the carinae (including the denticles). Scanning electron micrographs show that these latter surfaces are marked by parallel apicobasal striations, which in extant mammals reflect tooth-tooth contact. As such, we interpret the carinal wear facets in Dakosaurus as being formed by repeated tooth-tooth contact between the mesial and distal margins of the teeth of the upper and lower jaw. We posit that this increased the available shearing surface on their high crowns. Together, these wear patterns suggest that occlusion in Dakosaurus was specialized for cutting large and abrasive prey items into portions small enough to swallow, making it a prime example of an aquatic reptile with macrophagous feeding habits.

  5. Treatment imprudence leading to missed tooth fragment

    PubMed Central

    Barua, Pranamee; Chaudhary, Seema; Kaur, Harsimran; Mallikarjuna, Rachappa

    2013-01-01

    Traumatic dental injuries (TDI) represent one of the most common oral health problems in children and adolescents. Dental trauma requires a special consideration when it accompanies soft tissue lacerations. Tooth fragments occasionally penetrate into soft tissues and may cause severe complications. This article describes the case of a 12-year-old girl with a fractured tooth fragment embedded in the lower lip for 4 months, which went unnoticed at her primary health centre. This report highlights the importance of proper radiographic diagnosis along with clinical examination after trauma in order to prevent any future complications. PMID:23606390

  6. How to Prevent Tooth Decay in Your Baby

    MedlinePlus

    ... Español Text Size Email Print Share How to Prevent Tooth Decay in Your Baby Page Content ​ Baby ... spreading and to prevent further damage. How to Prevent Tooth Decay in Babies Take the following steps ...

  7. A panorama of tooth wear during the medieval period.

    PubMed

    Esclassan, Rémi; Hadjouis, Djillali; Donat, Richard; Passarrius, Olivier; Maret, Delphine; Vaysse, Frédéric; Crubézy, Eric

    2015-01-01

    Tooth wear is a natural phenomenon and a universal occurrence that has existed from the origin of humankind and depends on the way of life, especially diet. Tooth wear was very serious in ancient populations up to the medieval period. The aim of this paper is to present a global view of tooth wear in medieval times in Europe through different parameters: scoring systems, quantity and direction of wear, gender, differences between maxilla and mandible, relations with diet, caries, tooth malpositions and age.

  8. Masticatory ability and functional tooth units in Japanese adults.

    PubMed

    Ueno, M; Yanagisawa, T; Shinada, K; Ohara, S; Kawaguchi, Y

    2008-05-01

    The purposes of this study were (i) to examine the relationship between the number of natural teeth and the number of functional tooth units in Japanese adults, (ii) to evaluate how functional tooth units relate to subjective masticatory ability and (iii) to determine the minimum number of natural teeth and functional tooth units needed to maintain adequate self-assessed chewing function. A self-administered questionnaire was given and dental examination was conducted for 2164 residents aged 40 to 75 years. Counts were made on the number of functional tooth units of natural teeth (n-functional tooth units), the sum of natural teeth and artificial teeth on implant-supported and fixed prostheses (nif-functional tooth units) and the sum of natural teeth and artificial teeth on implant-supported, fixed and removable prostheses (total-functional tooth units). The average number of natural teeth, n-functional tooth units and nif-functional tooth units decreased with age, but these were often replaced by functional tooth units from artificial teeth on removable prostheses. Total-functional tooth units in 50-59 year old people were slightly lower compared with those in other age groups. Subjects who reported that they could chew every food item on an average had 23.4 total natural teeth, 12.6 posterior natural teeth, 7.6 n-functional tooth units, 8.6 nif-functional tooth units and 10.4 total-functional tooth units, and subjects without chewing difficulties had fewer functional tooth units from removable prostheses. Maintaining 20 and more natural teeth and at least eight nif-functional tooth units is important in reducing the likelihood of self-assessed chewing difficulties.

  9. Estimation of gear tooth transverse crack size from vibration by fusing selected gear condition indices

    NASA Astrophysics Data System (ADS)

    Choi, Sukhwan; Li, C. James

    2006-09-01

    Gears are common power transmission elements and are frequently responsible for transmission failures. Since a tooth crack is not directly measurable while a gear is in operation, one has to develop an indirect method to estimate its size from some measurables. This study developed such a method to estimate the size of a tooth transverse crack for a spur gear in operation. Using gear vibrations measured from an actual gear accelerated test, this study examined existing gear condition indices to identify those correlated well to crack size and established their utility for crack size estimation through index fusion using a neural network. When tested with vibrations measured from another accelerated test, the method had an averaged estimation error of about 5%.

  10. 21 CFR 872.3200 - Resin tooth bonding agent.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Resin tooth bonding agent. 872.3200 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3200 Resin tooth bonding agent. (a) Identification. A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be...

  11. 21 CFR 872.3200 - Resin tooth bonding agent.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Resin tooth bonding agent. 872.3200 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3200 Resin tooth bonding agent. (a) Identification. A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be...

  12. The Importance of Tooth Decay Prevention in Children under Three

    ERIC Educational Resources Information Center

    Milgrom, Peter; Huebner, Colleen; Chi, Donald

    2010-01-01

    Tooth decay and tooth loss was once the norm but public health interventions have led to major improvements for most people. Nevertheless, not all children have benefited. Dental disease in young children is unacceptably high. Tooth decay is preventable. Early childhood educators are often the first to notice the problem. Professional…

  13. 21 CFR 872.3590 - Preformed plastic denture tooth.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Preformed plastic denture tooth. 872.3590 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3590 Preformed plastic denture tooth. (a) Identification. A preformed plastic denture tooth is a prefabricated device, composed of materials such as...

  14. 21 CFR 872.3590 - Preformed plastic denture tooth.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Preformed plastic denture tooth. 872.3590 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3590 Preformed plastic denture tooth. (a) Identification. A preformed plastic denture tooth is a prefabricated device, composed of materials such as...

  15. 21 CFR 872.3590 - Preformed plastic denture tooth.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Preformed plastic denture tooth. 872.3590 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3590 Preformed plastic denture tooth. (a) Identification. A preformed plastic denture tooth is a prefabricated device, composed of materials such as...

  16. 21 CFR 872.3590 - Preformed plastic denture tooth.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Preformed plastic denture tooth. 872.3590 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3590 Preformed plastic denture tooth. (a) Identification. A preformed plastic denture tooth is a prefabricated device, composed of materials such as...

  17. 21 CFR 872.3590 - Preformed plastic denture tooth.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed plastic denture tooth. 872.3590 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3590 Preformed plastic denture tooth. (a) Identification. A preformed plastic denture tooth is a prefabricated device, composed of materials such as...

  18. 21 CFR 872.3690 - Tooth shade resin material.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Tooth shade resin material. 872.3690 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3690 Tooth shade resin material. (a) Identification. Tooth shade resin material is a device composed of materials such as bisphenol-A...

  19. 21 CFR 872.3690 - Tooth shade resin material.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Tooth shade resin material. 872.3690 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3690 Tooth shade resin material. (a) Identification. Tooth shade resin material is a device composed of materials such as bisphenol-A...

  20. 21 CFR 872.5525 - Preformed tooth positioner.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Preformed tooth positioner. 872.5525 Section 872...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected...

  1. 21 CFR 872.5525 - Preformed tooth positioner.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Preformed tooth positioner. 872.5525 Section 872...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected...

  2. 21 CFR 872.5525 - Preformed tooth positioner.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Preformed tooth positioner. 872.5525 Section 872...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected...

  3. 21 CFR 872.3690 - Tooth shade resin material.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Tooth shade resin material. 872.3690 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3690 Tooth shade resin material. (a) Identification. Tooth shade resin material is a device composed of materials such as bisphenol-A...

  4. 21 CFR 872.5525 - Preformed tooth positioner.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Preformed tooth positioner. 872.5525 Section 872...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected...

  5. 21 CFR 872.3200 - Resin tooth bonding agent.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Resin tooth bonding agent. 872.3200 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3200 Resin tooth bonding agent. (a) Identification. A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be...

  6. 21 CFR 872.3690 - Tooth shade resin material.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Tooth shade resin material. 872.3690 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3690 Tooth shade resin material. (a) Identification. Tooth shade resin material is a device composed of materials such as bisphenol-A...

  7. 21 CFR 872.5525 - Preformed tooth positioner.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed tooth positioner. 872.5525 Section 872...) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5525 Preformed tooth positioner. (a) Identification. A preformed tooth positioner is a plastic device that is an impression of a perfected...

  8. 21 CFR 872.3200 - Resin tooth bonding agent.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Resin tooth bonding agent. 872.3200 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3200 Resin tooth bonding agent. (a) Identification. A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be...

  9. 21 CFR 872.3200 - Resin tooth bonding agent.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Resin tooth bonding agent. 872.3200 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3200 Resin tooth bonding agent. (a) Identification. A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be...

  10. 21 CFR 872.3690 - Tooth shade resin material.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Tooth shade resin material. 872.3690 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3690 Tooth shade resin material. (a) Identification. Tooth shade resin material is a device composed of materials such as bisphenol-A...

  11. 21 CFR 872.3580 - Preformed gold denture tooth.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a) Identification. A preformed gold denture tooth is a device composed of austenitic alloys or alloys containing...

  12. 21 CFR 872.3580 - Preformed gold denture tooth.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a) Identification. A preformed gold denture tooth is a device composed of austenitic alloys or alloys containing...

  13. 21 CFR 872.3580 - Preformed gold denture tooth.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a) Identification. A preformed gold denture tooth is a device composed of austenitic alloys or alloys containing...

  14. 21 CFR 872.3580 - Preformed gold denture tooth.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a) Identification. A preformed gold denture tooth is a device composed of austenitic alloys or alloys containing...

  15. 21 CFR 872.3580 - Preformed gold denture tooth.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Preformed gold denture tooth. 872.3580 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3580 Preformed gold denture tooth. (a) Identification. A preformed gold denture tooth is a device composed of austenitic alloys or alloys containing...

  16. Inversion of coeval shear and normal stress of Piton de la Fournaise flank displacement

    NASA Astrophysics Data System (ADS)

    Tridon, Marine; Cayol, Valérie; Froger, Jean-Luc; Augier, Aurélien; Bachèlery, Patrick

    2016-11-01

    The April 2007 eruption of Piton de la Fournaise was the biggest volcano eruptive crisis of the 20th and 21st centuries. Interferometric synthetic aperture radar (InSAR) captured a large coeruptive seaward displacement on the volcano's eastern flank, which continued for more than a year at a decreasing rate. Coeruptive uplift and posteruptive subsidence were also observed. While it is generally agreed that flank displacement is induced by fault slip, we suggest that this flank displacement might have been induced by a sheared sill, based on observations of sheared sills at Piton des Neiges. To test this hypothesis, we develop a new method to invert a quadrangular curved source submitted to simultaneous pressure and shear stress changes. This method, based on boundary elements, is applied to data acquired along six Envisat orbits covering a 14 month period subsequent to the April 2007 eruption. Posteruptive displacement is well explained by closure and slip of a large (5 km by 8 km) and shallow (500 m) trapezoidal fracture parallel to the flank and probably coincident with a lithological discontinuity. We investigate whether thermal contraction or degassing of a coeruptive sill can explain the displacement. Such a sill would have to be 10 times thicker than inferred from the coeruptive uplift and solidification time 10 times shorter ( 20 days) than the duration of the posteruptive subsidence (24 to 33 months). Instead, we propose that the posteruptive eastern flank displacement is due to the compaction and ongoing slow slip on a shallow detachment fault.

  17. Isolation and characterization of the 5'-flanking sequence of the human ocular lens MIP gene.

    PubMed

    Wang, X Y; Ohtaka-Maruyama, C; Pisano, M M; Jaworski, C J; Chepelinsky, A B

    1995-12-29

    The MIP (major intrinsic protein) gene, a member of an ancient family of membrane channel genes, encodes the predominant fiber cell membrane protein of the ocular lens. Its specific expression in the lens fibers is temporally and spatially regulated during development. To study the regulation of expression of MIP and delineate the regulatory elements underlying its tissue specificity and ontogenic profile, we have cloned 2840 bp of the human MIP 5'-flanking sequence. The human MIP 5'-flanking sequence contains three complete Alu repetitive elements in tandem at position between nt -1699 and -2684 (nt -1699/-2684). These Alu elements appear to have had a complex evolutionary history with insertions at different times. We have fused DNA fragments containing MIP 5'-flanking sequences to the bacterial cat reporter gene encoding chloramphenicol acetyltransferase and assayed them in primary cultures of chicken lens cells. We have mapped two negative regulatory regions in the human MIP 5'-flanking sequences -1564/-1696 and -948/-1000. We demonstrated that the human MIP 5'-flanking sequence -253/+42 contains a functional promoter in lens cells but is inactive in kidney epithelial cells or mouse fibroblasts, suggesting that this sequence contains regulatory elements responsible for the lens-specific expression of MIP.

  18. Ground beef patties prepared from brisket, flank and plate have unique fatty acid and sensory characteristics.

    PubMed

    Blackmon, Terronica; Miller, Rhonda K; Kerth, Chris; Smith, Stephen B

    2015-05-01

    We hypothesized that unique ground beef products could be formulated from brisket, flank, and plate primals. Primals were taken from 4 USDA Select carcasses from conventionally produced cattle, selected at random in a commercial packing plant. Lean and fat trims were separated, and ground beef was formulated from each primal to contain 10, 20, or 30% total fat. Brisket patties contained higher proportions of monounsaturated fatty acids and less saturated fatty acids than flank patties. There were no differences in n-6 or n-3 fatty acids across primal type or fat level. After cooking, brisket patties had higher bloody/serumy and fat-like descriptor values than flank patties. Plate patties generated higher amounts of lipid-derived volatiles than patties from the brisket or flank. Brisket patties generally had higher amounts of pleasant headspace volatiles whereas the plate relied more heavily on Maillard-derived volatiles than flank patties. We conclude that individual primals can be used to formulate ground beef with unique compositional and flavor characteristics.

  19. On the mechanical properties of tooth enamel under spherical indentation.

    PubMed

    Chai, Herzl

    2014-11-01

    The mechanical properties of tooth enamel generally exhibit large variations, which reflect its structural and material complexity. Some key properties were evaluated under localized contact, simulating actual functioning conditions. Prominent cusps of extracted human molar teeth were polished down ~0.7 mm below the cusp tip and indented by tungsten carbide balls. The internal damage was assessed after unloading from longitudinal or transverse sections. The ultimate tensile stress (UTS) was determined using a novel bilayer specimen. The damage is characterized by penny-like radial cracks driven by hoop stresses and cylindrical cracks driven along protein-rich interrod materials by shear stresses. Shallow cone cracks typical of homogeneous materials which may cause rapid tooth wear under repeat contact are thus avoided. The mean stress vs. indentation strain curve is highly nonlinear, attributable to plastic shearing of protein between and within enamel rods. This curve is also affected by damage, especially radial cracks, the onset of which depends on ball radius. Several material properties were extracted from the tests, including shear strain at the onset of ring cracks γ(F) (=0.14), UTS (=119 MPa), toughness K(C) (=0.94 MPa m(1/2)), a crack propagation law and a constitutive response determined by trial and error with the aid of a finite-element analysis. These quantities, which are only slightly sensitive to anatomical location within the enamel region tested, facilitate a quantitative assessment of crown failure. Causes for variations in published UTS and K(C) values are discussed.

  20. Tooth wear: diet analysis and advice.

    PubMed

    Young, William George

    2005-04-01

    Diet analysis and advice for patients with tooth wear is potentially the most logical intervention to arrest attrition, erosion and abrasion. It is saliva that protects the teeth against corrosion by the acids which soften enamel and make it susceptible to wear. Thus the lifestyles and diet of patients at risk need to be analysed for sources of acid and reasons for lost salivary protection. Medical conditions which put patients at risk of tooth wear are principally: asthma, bulimia nervosa, caffeine addiction, diabetes mellitus, exercise dehydration, functional depression, gastroesophageal reflux in alcoholism, hypertension and syndromes with salivary hypofunction. The sources of acid are various, but loss of salivary protection is the common theme. In healthy young Australians, soft drinks are the main source of acid, and exercise dehydration the main reason for loss of salivary protection. In the medically compromised, diet acids and gastroesophageal reflux are the sources, but medications are the main reasons for lost salivary protection. Diet advice for patients with tooth wear must: promote a healthy lifestyle and diet strategy that conserves the teeth by natural means of salivary stimulation; and address the specific needs of the patients' oral and medical conditions. Individualised, patient-empowering erosion WATCH strategies; on Water, Acid, Taste, Calcium and Health, are urgently required to combat the emerging epidemic of tooth wear currently being experienced in westernised societies.

  1. Tooth rotation and alveolar bone loss.

    PubMed

    Peretz, B; Machtei, E E

    1996-07-01

    Tooth rotation and periodontal breakdown has not been thoroughly studied due to lack of quantitative tools. The purpose of the present study was to examine this correlation, with respect to alveolar bone loss, from direct observation of 17 skulls. A photograph of the mandibular occlusal plane was taken from a fixed reference point, and the midcentral fossa and the extreme mesial and distal points of each tooth were marked on the photograph. A computer program established the arch form of each mandibular from the midtooth landmarks. The angle between individual teeth and the arch (at any given point) was calculated. Bone loss, indicated by the distance of the bone crest from the cementoenamel junction, was measured at six reference points around each tooth with a caliper. A positive correlation, through weak, was found between increased tooth rotation and greater bone loss. Mean bone loss of teeth with rotation of 20 degrees and greater was 4.03 mm, while that of teeth with less than 20 degrees of rotation was 3.49 mm.

  2. Computerized Inspection Of Gear-Tooth Surfaces

    NASA Technical Reports Server (NTRS)

    Handschuh, R. F.; Litvin, F. L.; Zhang, Y.; Kuan, C.

    1994-01-01

    Method of manufacturing gears with precisely shaped teeth involves computerized inspection of gear-tooth surfaces followed by adjustments of machine-tool settings to minimize deviations between real and theoretical versions of surfaces. Thus, iterated cycles of cutting gear teeth, inspection, and adjustments help increase and/or maintain precision of subsequently manufactured gears.

  3. Accuracy of developing tooth length as an estimate of age in human skeletal remains: the deciduous dentition.

    PubMed

    Cardoso, Hugo F V

    2007-10-02

    Dental age assessments are widely used to estimate age of immature skeletal remains. Most methods have relied on fractional stages of tooth emergence and formation, particularly of the permanent dentition, for predicting the age of infants and very young children. In this study, the accuracy of regression equations of developing deciduous tooth length for age estimation (Liversidge et al.) is tested on a sample of 30 Portuguese subadult skeletons of known age at death. Overall the method shows high accuracy and the average difference between estimated and chronological age is between 0.20 and -0.14 years when using single teeth, and 0.06 years, when using all available teeth. However, there is a tendency for the deciduous molars to provide overestimates of chronological age. Results show that age estimates can be obtained within +/-0.10 years with a 95% confidence interval when several teeth are used. Overall between-tooth agreement in age estimates decreases with increasing age but there is less variability of estimates with more teeth contributing to overall mean age. One seemingly limitation of this method may be the fact that it was developed by combining the maxillary and mandibular teeth. The other is related to the accuracy with which radiographic tooth length can be used as a valid surrogate for actual tooth length. Nevertheless, the advantages of this metric method surpass the limitations of chronologies based on stages of dental development.

  4. Exceptionally prolonged tooth formation in elasmosaurid plesiosaurians

    PubMed Central

    Kear, Benjamin P.; Larsson, Dennis; Lindgren, Johan; Kundrát, Martin

    2017-01-01

    Elasmosaurid plesiosaurians were globally prolific marine reptiles that dominated the Mesozoic seas for over 70 million years. Their iconic body-plan incorporated an exceedingly long neck and small skull equipped with prominent intermeshing ‘fangs’. How this bizarre dental apparatus was employed in feeding is uncertain, but fossilized gut contents indicate a diverse diet of small pelagic vertebrates, cephalopods and epifaunal benthos. Here we report the first plesiosaurian tooth formation rates as a mechanism for servicing the functional dentition. Multiple dentine thin sections were taken through isolated elasmosaurid teeth from the Upper Cretaceous of Sweden. These specimens revealed an average of 950 daily incremental lines of von Ebner, and infer a remarkably protracted tooth formation cycle of about 2–3 years–other polyphyodont amniotes normally take ~1–2 years to form their teeth. Such delayed odontogenesis might reflect differences in crown length and function within an originally uneven tooth array. Indeed, slower replacement periodicity has been found to distinguish larger caniniform teeth in macrophagous pliosaurid plesiosaurians. However, the archetypal sauropterygian dental replacement system likely also imposed constraints via segregation of the developing tooth germs within discrete bony crypts; these partly resorbed to allow maturation of the replacement teeth within the primary alveoli after displacement of the functional crowns. Prolonged dental formation has otherwise been linked to tooth robustness and adaption for vigorous food processing. Conversely, elasmosaurids possessed narrow crowns with an elongate profile that denotes structural fragility. Their apparent predilection for easily subdued prey could thus have minimized this potential for damage, and was perhaps coupled with selective feeding strategies that ecologically optimized elasmosaurids towards more delicate middle trophic level aquatic predation. PMID:28241059

  5. Orthodontic tooth movement after different coxib therapies.

    PubMed

    de Carlos, Felix; Cobo, Juan; Perillan, Carmen; Garcia, Miguel A; Arguelles, Juan; Vijande, Manuel; Costales, Marina

    2007-12-01

    Anti-inflammatory substances used for treatment of pain and discomfort related to orthodontic treatment (OT) could slow down tooth movement. Selective cyclooxygenase-2 inhibitors are an alternative to conventional non-steroidal anti-inflammatory drugs. The aim of this study was to compare different coxibs on dental movement in the rat. Twenty-eight Wistar male rats (3 months old) divided into four experimental groups were studied: (1) Five rats underwent a 50 g coil spring implantation and received three injections of 0.5 mg/kg body weight (bw) of Rofecoxib in the maxillary gingiva, close to the first molar, on the day of implantation and after 3 and 5 days. Similar procedures were carried out (2) on six animals receiving 8 mg/kg bw of Celecoxib and (3) on five animals receiving 25 mg/kg bw of Parecoxib. (4) For the controls, 12 rats received the same OT but only equivolumetric 0.9 per cent saline solution injections. Tooth movement was measured on lateral cranial teleradiographs after 10 days of treatment. Non-parametric standard techniques (Wilcoxon, H, and Mann-Whitney, U) were used for statistical analysis. Mesial tooth displacement in the control animals was 0.33 +/- 0.07 mm. While no movement was found in rats treated with Rofecoxib, the Celecoxib- and Parecoxib-treated rats showed tooth movement of 0.42 +/- 0.09 mm and 0.22 +/- 0.04 mm, respectively. The differences were statistically significant (H = 13.07; P < 0.004). Celecoxib and Parecoxib, but not Rofecoxib, seem appropriate for discomfort and pain relief while avoiding interference during tooth movement.

  6. Developing a biomimetic tooth bud model.

    PubMed

    Smith, Elizabeth E; Zhang, Weibo; Schiele, Nathan R; Khademhosseini, Ali; Kuo, Catherine K; Yelick, Pamela C

    2017-01-08

    A long-term goal is to bioengineer, fully functional, living teeth for regenerative medicine and dentistry applications. Biologically based replacement teeth would avoid insufficiencies of the currently used dental implants. Using natural tooth development as a guide, a model was fabricated using post-natal porcine dental epithelial (pDE), porcine dental mesenchymal (pDM) progenitor cells, and human umbilical vein endothelial cells (HUVEC) encapsulated within gelatin methacrylate (GelMA) hydrogels. Previous publications have shown that post-natal DE and DM cells seeded onto synthetic scaffolds exhibited mineralized tooth crowns composed of dentin and enamel. However, these tooth structures were small and formed within the pores of the scaffolds. The present study shows that dental cell-encapsulated GelMA constructs can support mineralized dental tissue formation of predictable size and shape. Individually encapsulated pDE or pDM cell GelMA constructs were analysed to identify formulas that supported pDE and pDM cell attachment, spreading, metabolic activity, and neo-vasculature formation with co-seeded endothelial cells (HUVECs). GelMa constructs consisting of pDE-HUVECS in 3% GelMA and pDM-HUVECs within 5% GelMA supported dental cell differentiation and vascular mineralized dental tissue formation in vivo. These studies are the first to demonstrate the use of GelMA hydrogels to support the formation of post-natal dental progenitor cell-derived mineralized and functionally vascularized tissues of specified size and shape. These results introduce a novel three-dimensional biomimetic tooth bud model for eventual bioengineered tooth replacement teeth in humans. Copyright © 2017 John Wiley & Sons, Ltd.

  7. Analysis of the soluble human tooth proteome and its ability to induce dentin/tooth regeneration.

    PubMed

    Chun, So Young; Lee, Hyo Jung; Choi, Young Ae; Kim, Kyung Min; Baek, Sang Heum; Park, Hyo Sang; Kim, Jae-Young; Ahn, Jung-Mo; Cho, Je-Yeol; Cho, Dong-Woo; Shin, Hong-In; Park, Eui Kyun

    2011-01-01

    While the soluble proteins of human teeth consist of various extracellular matrix and bioactive proteins, they have not yet been characterized fully. Moreover, the role they play in tooth regeneration is not clear. Analysis of the soluble proteins in human teeth by liquid chromatography-mass spectrometry revealed 147 different ethylenediaminetetraacetic acid-soluble tooth proteins (ESTPs). Of these, 29 had not been shown previously to be present in human teeth. To determine their effect on the in vitro responses of dental pulp stem cells (DPSCs), DPSCs were cultured in ESTP-coated culture plates and three-dimensional scaffolds. The ESTPs significantly enhanced DPSC odontoblast differentiation and mineralization in vitro, but had only partial effect on bone marrow stem cells or adipose tissue stem cells. To test the effect of ESTPs on in vivo dentin and tooth formation, mouse embryonic tooth-forming primordia and xenogenic murine apical bud epithelium/human DPSC composites were treated with ESTPs before implantation under the renal capsule of ICR mice. ESTP treatment promoted the formation of morphologically normal teeth by the tooth-forming primordium regions and enhanced the development of a regular and large dentin structure by the composites. These observations suggest that human ESTPs contain dentinogenic proteins and can promote dentin and tooth formation.

  8. Magmatism on rift flanks: Insights from ambient noise phase velocity in Afar region

    NASA Astrophysics Data System (ADS)

    Korostelev, Félicie; Weemstra, Cornelis; Leroy, Sylvie; Boschi, Lapo; Keir, Derek; Ren, Yong; Molinari, Irene; Ahmed, Abdulhakim; Stuart, Graham W.; Rolandone, Frédérique; Khanbari, Khaled; Hammond, James O. S.; Kendall, J. M.; Doubre, Cécile; Ganad, Ismail Al; Goitom, Berhe; Ayele, Atalay

    2015-04-01

    During the breakup of continents in magmatic settings, the extension of the rift valley is commonly assumed to initially occur by border faulting and progressively migrate in space and time toward the spreading axis. Magmatic processes near the rift flanks are commonly ignored. We present phase velocity maps of the crust and uppermost mantle of the conjugate margins of the southern Red Sea (Afar and Yemen) using ambient noise tomography to constrain crustal modification during breakup. Our images show that the low seismic velocities characterize not only the upper crust beneath the axial volcanic systems but also both upper and lower crust beneath the rift flanks where ongoing volcanism and hydrothermal activity occur at the surface. Magmatic modification of the crust beneath rift flanks likely occurs for a protracted period of time during the breakup process and may persist through to early seafloor spreading.

  9. Computer aided design and analysis of gear tooth geometry

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.

    1987-01-01

    A simulation method for gear hobbing and shaping of straight and spiral bevel gears is presented. The method is based upon an enveloping theory for gear tooth profile generation. The procedure is applicable in the computer aided design of standard and nonstandard tooth forms. An inverse procedure for finding a conjugate gear tooth profile is presented for arbitrary cutter geometry. The kinematic relations for the tooth surfaces of straight and spiral bevel gears are proposed. The tooth surface equations for these gears are formulated in a manner suitable for their automated numerical development and solution.

  10. Generation of a crowned pinion tooth surface by a plane

    NASA Technical Reports Server (NTRS)

    Litvin, F. L.; Zhang, J.; Handschuh, R. F.

    1988-01-01

    The topology of a crowned spur pinion tooth surface that reduces the level of transmission errors due to misalignment is described. The geometry of the modified pinion tooth surface and of the regular involute gear tooth surface is discussed. The tooth contact analysis between the meshing surfaces is also described. Generating a modified pinion tooth surface by a plane whose motion is controlled by a 5-degree-of-freedom system is investigated. The numerical results included indicate that the transmission error remains low as the gears are misaligned.

  11. Mantle Flow, Dynamic Topography and Rift-Flank Uplift of Arabia

    NASA Astrophysics Data System (ADS)

    Daradich, A. L.; Mitrovica, J. X.; Pysklywec, R. N.; Willett, S. D.

    2002-12-01

    The Red Sea is flanked by highlands. To the east, the Arabian platform is broadly tilted along an axis that runs parallel to the sea, and the long tail of high topography has been described as a classic example of `rift-flank uplift' [Wernicke, 1985]. A suite of thermal and mechanical effects have been invoked to derive generic mechanisms for flank uplift and these have been applied, with varying levels of success, to the Arabian case. We propose that dynamic topography supported by large scale mantle flow beneath the Africa-Arabia system contributes significantly to the observed pattern of Arabian rift-flank uplift. Seismic tomographic images indicate the existence of large scale (anomalously slow) heterogeneity originating from the deep mantle under southern Africa and, apparently, connecting to more shallow structure beneath the East African Rift system and the Arabian plate. We predict Arabian topography driven by viscous stresses associated with this buoyant megastructure. We first convert velocity anomalies given by the seismic S-wave model S20RTS [Ritsema et al., 1999] to density anomalies using standard scaling profiles, and then input these into a 2-D mantle convection model. Normal stresses derived from the flow models are then used to compute associated profiles of surface (`dynamic') topography. These profiles reconcile the observed topography of the Arabian platform and they provide an explanation for the distinct geometry of rift-flank uplift across the two sides of the Red Sea. Our calculations do not preclude a contribution to topography from previously described thermal and/or mechanical effects; however, they indicate that future analyses of rift-flank uplift should consider the potential contribution from large scale mantle flow.

  12. The geomorphology of the flanks of the Lord Howe Island volcano, Tasman Sea, Australia

    NASA Astrophysics Data System (ADS)

    Kennedy, D. M.; Brooke, B. P.; Woodroffe, C. D.; Jones, B. G.; Waikari, C.; Nichol, S.

    2011-04-01

    The flanks of mid-ocean volcanoes are inherently unstable features especially in the constructional phase of development when the volcano is active. Lateral and vertical stresses are placed on the volcanic edifice as it builds, with the flanks continuing to be unstable up to at least 1 Ma after volcanism has ceased. The flanks of the Lord Howe Island volcano record this period of greatest instability and a subsequent period in which marine and subaerial erosion have dominated its geomorphic evolution. Lord Howe Island lies in the Tasman Sea of the Southern Pacific region and is the subaerial remnant of a Miocene mid-ocean volcano. The island has only recently entered reef building seas and therefore has been subject to marine erosive processes over the past 5-6 Ma. The island is unique as it sits on the stable drowned continental crust of the Lord Howe Rise rather than oceanic crust like many other mid-plate basaltic islands. Multibeam sonar bathymetry data were collected to a depth of 3500 m where the island flanks grade into the surrounding planar sea floor. Several slump features are evident, the largest being over 130 km 2 in area. These features are inferred to be old (late Tertiary) based on an extensive cover of marine sediment as indicated by low multibeam backscatter intensity and subdued topography. Most likely the slumps formed during the immediate post-eruptive stage of volcano evolution, before the bulk of the subaerial portion of the volcano was removed by marine erosion. Flank processes are now dominated by the deposition of carbonate sediment composed of mollusc and foraminiferal remains. Based on radiocarbon and stable isotope analyses of a sediment core (760 m depth) collected on a trough in the centre of the volcanic edifice, Quaternary sediment was likely deposited predominantly during glacial periods. The erosional morphology, sediment cover and tectonic stability of the region suggest that the flanks of the volcano are at present relatively

  13. DNA double-strand break repair: Genetic determinants of flanking crossing-over

    SciTech Connect

    Kusano, Kohji; Sunohara, Yukari; Kobayashi, Ichizo; Takahashi, Noriko; Yoshikura, Hiroshi )

    1994-02-01

    Whether or not homologous interaction of two DNA molecules results in crossing-over of the flanking sequences is an important decision in view of genome organization. Several homologous recombination models, including the double-strand break repair models, explain this decision as choice between two alternative modes of resolution of Holliday-type intermediates. The authors have demonstrated that a double-strand gap can be repaired through gene conversion copying a homologous duplex, as predicted by the double-strand break repair models, in the RecE pathway of Escherichia coli. This gap repair is often accompanied by crossing-over of the flanking sequences. Mutations in ruvC and recG, whose products interact with Holliday structures in vitro, do not block double-strand gap repair or its association with flanking crossing-over. However, two mutations in the recJ gene, which encodes a single-strand 5[prime][yields]3[prime] exonuclease, severely decrease association of flanking crossing-over. Two mutations in the recQ gene, which encodes a helicase, moderately decrease association of flanking crossing-over by themselves and suppress the severe effect of a recJ mutation. Similar relationships of recJ and recQ mutations are observed in cell survival after ultraviolet light irradiation, [gamma]-ray irradiation, and H[sub 2]O[sub 2] treatment. The authors discuss how cooperation of the recQ gene product and the recJ gene product brings about double-strand break repair accompanied by flanking crossing-over. They also discuss how this reaction is related to repair of chromosome damages.

  14. Comparison of flank modification on Ascraeus and Arsia Montes volcanoes, Mars

    NASA Technical Reports Server (NTRS)

    Zimbelman, James R.

    1993-01-01

    Geologic mapping of the Tharsis Montes on Mars is in progress as part of the Mars Geologic Mapping Program of NASA. Mapping of the southern flanks of Ascraeus Mons at 1:500,000 scale was undertaken first followed by detailed mapping of Arsia Mons; mapping of Pavonis Mons will begin later this year. Results indicate that each of the Tharsis volcanoes displays unique variations on the general 'theme' of a martian shield volcano. Here we concentrate on the flank characteristics on Ascraeus Mons and Arsia Mons, the northernmost and southernmost of the Tharsis Montes, as illustrative of the most prominent trends.

  15. Upwelling of hydrothermal solutions through ridge flank sediments shown by pore water profiles

    SciTech Connect

    Maris, C.R.P.; Bender, M.L.

    1982-05-07

    High calcium ion and low magnesium ion concentrations in sediment pore waters in cores from the Galapagos Mounds Hydrothermal Field on the flank of the Galapagos Spreading Center are believed to be due to a calcium-magnesium exchange reaction between circulating seawater and basement basalt. The nonlinearity of the calcium ions and magnesium ion gradients indicates that these discharging hydrothermal solutions on the ridge flank are upwelling at the rate of about 1 centimeter per year through the pelagic sediments of the Mounds Field and at about 20 centimeters per year through the hydrothermal mounds themselves.

  16. Noncontact intraoral measurement of force-related tooth mobility.

    PubMed

    Göllner, Matthias; Holst, Alexandra; Berthold, Christine; Schmitt, Johannes; Wichmann, Manfred; Holst, Stefan

    2010-10-01

    The aim of this pilot study was to measure force-related tooth mobility. Vertical and horizontal anterior tooth mobility in 31 healthy periodontal subjects was measured by a noncontact optical measurement technique. The subjects continuously increased the force on each tooth by biting on a load cell. An automated software program recorded tooth displacement at 9-N intervals. Vertical and horizontal displacements were subsequently measured. The vector of tooth mobility in the buccal direction was calculated using the Pythagorean theorem. The average displacements over all subjects for each tooth were determined. Global differences were assessed with the Wilcoxon test. There were no significant differences between contralateral teeth overall load stages. There were no significant differences in tooth mobility between the central and lateral incisors except for in the horizontal direction. However, there were significant differences between central incisor and canine and lateral incisor and canine teeth.

  17. Clinical management of the avulsed tooth.

    PubMed

    Trope, M

    1995-01-01

    Treatment outside the dental office: Replant immediately after gentle washing if practical. If replantation is not practical, store the tooth in the best medium available. Storage media in order of preference are Hank's Balanced Salt Solution (HBSS), milk, saline, and saliva (buccal vestibule). Water is the least desirable storage medium. Treatment in the office: Emergency visit; Place tooth in HBSS while exam is conducted and history is taken. Prepare socket for gentle repositioning of the tooth. Prepare the root. Extraoral dry time < 20 minutes: Closed apex--replant immediately after gentle washing. Open apex--soak in 1 mg doxycycline in 20 mg saline for 5 minutes. Extraoral dry time 20 to 60 minutes: Soak in HBSS for 30 minutes and replant. Extraoral dry time > 60 minutes: soak in citric acid, 2% stannous fluoride, and doxycycline and replant. Endodontics can be done extraorally. Semirigid splint for 7 to 10 days. (If alveolar fracture is present, rigid splint for 4 to 8 weeks). Suture soft-tissue lacerations, particularly in the cervical area. Administer systemic antibiotics (penicillin V potassium if possible) Chlorhexidine rinses and stringent oral hygiene while the splint is in place (7 to 10 days). Analgesics as required. Second visit after 7 to 10 days: Endodontic treatment: Tooth with open apex and extraoral dry time of < 60 minutes: No endodontic treatment initially. Recall every 3 to 4 weeks to examine for evidence of pathosis. If pathosis is noted, disinfect the pulp space and start apexification procedure. Tooth with open apex and extraoral dry time > 60 minutes: If endodontics was not completed in the emergency visit, start endodontics and follow apexification procedure. Tooth with closed apex: Endodontics should be initiated after 7 to 10 days. Careful chemomechanical instrumentation under strict asepsis. Splint removed at end of visit. Obturation visit: If endodontics was initiated 7 to 10 days after the avulsion, obturation can take place after

  18. The design and analysis of single flank transmission error testor for loaded gears

    NASA Technical Reports Server (NTRS)

    Houser, D. R.; Bassett, D. E.

    1985-01-01

    Due to geometrical imperfections in gears and finite tooth stiffnesses, the motion transmitted from an input gear shaft to an output gear shaft will not have conjugate action. In order to strengthen the understanding of transmission error and to verify mathematical models of gear transmission error, a test stand that will measure the transmission error of a gear pair at operating loads, but at reduced speeds would be desirable. This document describes the design and development of a loaded transmission error tester. For a gear box with a gear ratio of one, few tooth meshing combinations will occur during a single test. In order to observe the effects of different tooth mesh combinations and to increase the ability to load test gear pairs with higher gear ratios, the system was designed around a gear box with a gear ratio of two.

  19. Two stage gear tooth dynamics program

    NASA Technical Reports Server (NTRS)

    Boyd, Linda S.

    1989-01-01

    The epicyclic gear dynamics program was expanded to add the option of evaluating the tooth pair dynamics for two epicyclic gear stages with peripheral components. This was a practical extension to the program as multiple gear stages are often used for speed reduction, space, weight, and/or auxiliary units. The option was developed for either stage to be a basic planetary, star, single external-external mesh, or single external-internal mesh. The two stage system allows for modeling of the peripherals with an input mass and shaft, an output mass and shaft, and a connecting shaft. Execution of the initial test case indicated an instability in the solution with the tooth paid loads growing to excessive magnitudes. A procedure to trace the instability is recommended as well as a method of reducing the program's computation time by reducing the number of boundary condition iterations.

  20. Non-surgical management of tooth hypersensitivity.

    PubMed

    Clark, Danielle; Levin, Liran

    2016-10-01

    Tooth sensitivity is a common complaint of patients in dental practices. Studies have demonstrated dentinal hypersensitivity to affect 10-30% of the population. There are various potential causes of tooth sensitivity and a variety of available treatment options. This narrative review will discuss the possible aetiology of this condition, as well as the treatment modalities available. A tailor-made treatment plan that starts with the most non-invasive treatment options and escalates only when those options have proven insufficient in alleviating symptoms should be provided for each patient. Only after all non- and less-invasive methods have failed to reduce the symptoms should more invasive treatment options, such as root-coverage, be considered.

  1. Effective property of tooth enamel: monoclinic behavior.

    PubMed

    Lu, Cunyou; Nakamura, Toshio; Korach, Chad S

    2012-05-11

    Human tooth enamel possesses a unique morphology characterized by a repeated cell arrangement, which is composed of varying orientations of hydroxyapatite crystals. In the past, various investigators have reported diverse mechanical properties based on isotropic or orthotropic mechanical models in their experimental and numerical studies. However, these models are insufficient to capture the accurate microstructural effects on the enamel mechanical response. In this paper, a monoclinic anisotropic model, which offers correct descriptions of enamel deformation behaviors, is introduced. The model takes into account the 3D orientation changes of the hydroxyapatite crystals and their spatial elastic property variations. The proposed approach is based on a unit-cell and periodic boundary conditions, and it utilizes the collective deformation characteristics of many rods to determine 13 independent material constants required for the monoclinic model. These constants are necessary to utilize the effective property model to study various mechanical conditions such as abrasion, erosion, wear and fracture of whole tooth enamel.

  2. Aggregatibacter Actinomycetemcomitans – A Tooth Killer?

    PubMed Central

    Ummer, Fajar; Dhivakar, C.P

    2014-01-01

    Strong evidence is available on Aggregatibacter actinomycetemcomitans (A.a) on its role as the causative agent of localised juvenile periodontitis (LJP), a disease characterised by rapid destruction of the tooth-supporting tissues. This organism possesses a large number of virulence factors with a wide range of activities which enable it to colonise the oral cavity, invade periodontal tissues, evade host defences, initiate connective tissue destruction and interfere with tissue repair. Adhesion to epithelial and tooth surfaces is dependent on the presence of surface proteins and structures such as microvesicles and fimbriae. Invasion has been demonstrated in vivo and in vitro. The organism has a number of means of evading host defences which include: (i) production of leukotoxin; (ii) producing immunosuppressive factors; (iv) secreting proteases capable of cleaving IgG; and (v) producing Fc-binding. PMID:25302290

  3. Large scale study of tooth enamel

    SciTech Connect

    Bodart, F.; Deconninck, G.; Martin, M.Th.

    1981-04-01

    Human tooth enamel contains traces of foreign elements. The presence of these elements is related to the history and the environment of the human body and can be considered as the signature of perturbations which occur during the growth of a tooth. A map of the distribution of these traces on a large scale sample of the population will constitute a reference for further investigations of environmental effects. One hundred eighty samples of teeth were first analysed using PIXE, backscattering and nuclear reaction techniques. The results were analysed using statistical methods. Correlations between O, F, Na, P, Ca, Mn, Fe, Cu, Zn, Pb and Sr were observed and cluster analysis was in progress. The techniques described in the present work have been developed in order to establish a method for the exploration of very large samples of the Belgian population.

  4. Reasons for permanent tooth extractions in Taiwan.

    PubMed

    Lee, Chen-Yi; Chang, Yong-Yuan; Shieh, Tien-Yu; Chang, Chin-Shun

    2015-03-01

    There has been no study in Taiwan on reasons for extraction of permanent teeth. This study aimed to determine the reasons for permanent teeth extraction in Taiwan. This study performed a secondary data analysis based on the National Health Insurance Research Database. The 2009 database was adopted and there are 131 104 records of dental visits in the database; among them, 4958 visits (from 4811 patients) have a coding of extraction. The results showed that dental caries (55.3%) was the main reason for tooth extraction, followed by periodontal disease (22.1%). Extraction because of dental caries was commonly observed in all age-groups, and extractions because of periodontal disease increased in those older than 35 years. Maxillary and mandibular third molar were the most frequently removed tooth types, and most were extracted because of dental caries and impaction respectively.

  5. New method of control of tooth whitening

    NASA Astrophysics Data System (ADS)

    Angelov, I.; Mantareva, V.; Gisbrecht, A.; Valkanov, S.; Uzunov, Tz.

    2010-10-01

    New methods of control of tooth bleaching stages through simultaneous measurements of a reflected light and a fluorescence signal are proposed. It is shown that the bleaching process leads to significant changes in the intensity of a scattered signal and also in the shape and intensity of the fluorescence spectra. Experimental data illustrate that the bleaching process causes essential changes in the teeth discoloration in short time as 8-10 min from the beginning of the application procedure. The continuation of the treatment is not necessary moreover the probability of the enamel destroy increases considerably. The proposed optical back control of tooth surface is a base for development of a practical set up to control the duration of the bleaching procedure.

  6. Investigation on the flanking transmission of impact sound insulation of floor

    NASA Astrophysics Data System (ADS)

    Semprini, Giovanni; Cocchi, Alessandro

    2004-05-01

    Impact sound pressure level of floors depends, as general rule, on direct sound radiated by the floor excited by a standard tapping machine and on flanking transmission of lateral walls. Depending on the kind of junction between the floor and walls of the receiving room, flanking paths can be more or less important. Requirements of laboratory test specimens are not well specified in EN ISO 140 standards, particularly for junctions of the test floor and lateral walls. In this paper measurements performed at DIENCA laboratory are presented in order to evaluate the influence of flanking transmission on impact sound pressure levels of a standard floor and on impact sound reduction level of standard floor with a resilient layer. Measurements are performed on a 14-cm-thick concrete floor in two different conditions: first connected on two sides of the receiving room and then on all four sides. Impact sound pressure levels and vibration levels are analyzed in order to evaluate the contribution of different transmission paths. As the measurements were carried on in the new facility for measurement of the contribution of the flanking transmission, this facility will be exhaustively presented in the paper.

  7. Geomorphological Map of the Lower NW Flank of Hecates Tholus Volcano, Mars

    NASA Astrophysics Data System (ADS)

    de Pablo, M. A.; Centeno, J. D.

    2012-03-01

    We present our 1:100,000-scale geomorphological map of the NW flank of Hecates Tholus volcano, Mars, by the use of CTX images and HRSC-derived DTM. This map will allow us to study in detail the geology and glacial history of this volcano.

  8. Acute flank pain secondary to urolithiasis: radiologic evaluation and alternate diagnoses.

    PubMed

    Jindal, Gaurav; Ramchandani, Parvati

    2007-05-01

    This article discusses the radiologic management of the patient who has acute flank pain. It describes the evolution of radiologic imaging in patients who present with acute symptoms caused by suspected urolithiasis, the advantages of unenhanced helical CT and the limitations of abdominal radiography, intravenous urography, and ultrasonography in this setting, and the alternative diagnoses encountered within the urinary tract, abdomen, and pelvis.

  9. Hazard potential of volcanic flank collapses raised by new megatsunami evidence.

    PubMed

    Ramalho, Ricardo S; Winckler, Gisela; Madeira, José; Helffrich, George R; Hipólito, Ana; Quartau, Rui; Adena, Katherine; Schaefer, Joerg M

    2015-10-01

    Large-scale gravitational flank collapses of steep volcanic islands are hypothetically capable of triggering megatsunamis with highly catastrophic effects. Yet, evidence for the generation and impact of collapse-triggered megatsunamis and their high run-ups remains scarce or is highly controversial. Therefore, doubts remain on whether island flank failures truly generate enough volume flux to trigger giant tsunamis, leading to diverging opinions concerning the real hazard potential of such collapses. We show that one of the most prominent oceanic volcanoes on Earth-Fogo, in the Cape Verde Islands-catastrophically collapsed and triggered a megatsunami with devastating effects ~73,000 years ago. Our deductions are based on the recent discovery and cosmogenic (3)He dating of tsunamigenic deposits found on nearby Santiago Island, which attest to the impact of this giant tsunami and document wave run-up heights exceeding 270 m. The evidence reported here implies that Fogo's flank failure involved at least one fast and voluminous event that led to a giant tsunami, in contrast to what has been suggested before. Our observations therefore further demonstrate that flank collapses may indeed catastrophically happen and are capable of triggering tsunamis of enormous height and energy, adding to their hazard potential.

  10. 7. INTERIOR LIVING ROOM SHOWING 6LIGHT FRONT DOOR FLANKED BY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. INTERIOR LIVING ROOM SHOWING 6-LIGHT FRONT DOOR FLANKED BY ONE OF TWO 6-LIGHT OVER 1-LIGHT SASH WINDOWS AT PHOTO RIGHT, AND OPEN DOORWAY TO BEDROOM NUMBER ONE (AND BEDROOM NUMBER TWO IN BACKGROUND) AT PHOTO LEFT. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  11. Rift flank segmentation, basin initiation and propagation: a neotectonic example from Lake Baikal

    USGS Publications Warehouse

    Agar, S.M.; Klitgord, Kim D.

    1995-01-01

    New surficial data (field, Landsat TM and topography) define morpho-tectonic domains and rift flank segmentation in the Ol'khon region of the Central Baikal rift. Deformation, drainage and depositional patterns indicate a change in the locus of active extension that may relate to a recent (flank graben has propagated southwards along the rift flank and is still actively fragmenting. These surficial data are used to constrain a model for the time-dependent topographic variations during progressive subsidence along a rift flank, involving the transfer of footwall units to hanging-wall domains. Rapid changes in border fault footwall relief in this model are associated with change in the active border fault location with widespread mass-wasting. The model shows that time-dependent histories need to be integrated with flexural uplift models for active normal faults. The active, syn-rift depositional systems of the Ol'khon region provide a valuable analogue for the early evolution of continental margins and the structural controls on syn-rift hydrocarbon sources and reservoirs.

  12. Magmatism on rift flanks: insights from Ambient-Noise Phase-velocity in Afar region

    NASA Astrophysics Data System (ADS)

    Korostelev, Félicie; Weemstra, Cornelis; Leroy, Sylvie; Boschi, Lapo; Ren, Yong; Ahmed, Abdulhakim; Keir, Derek; Stuart, Graham W.; Rolandone, Frédérique; Khanbari, Khaled; Hammond, James O. S.; Kendall, J. Michael; Doubre, Cécile; Ganad, Ismail Al

    2015-04-01

    During the breakup of continent in the presence of magma, strain is commonly assumed to initially occur by border faulting, and progressively migrate in space and time towards axial magma intrusion. Magmatic processes near the rift flanks are commonly ignored. We present phase-velocity maps of the crust and uppermost mantle of the conjugate margins of the southern Red Sea (Afar and Yemen) using ambient noise tomography to constrain crustal modification during breakup. Our images show that the low seismic velocities characterize not only upper crust beneath the axial volcanic systems, but also both upper and lower crust beneath rift flanks where ongoing volcanism and hydrothermal activity occurs at the surface. The results show that magmatic modification of the crust beneath rift flanks likely occurs for a protracted period of time during the breakup process, and may persist through to early seafloor spreading. Since ongoing flank magmatism during breakup impacts the thermal evolution of the lithosphere, it has implications for the subsidence history of the rift.

  13. Sudden aseismic fault slip on the south flank of Kilauea volcano.

    PubMed

    Cervelli, Peter; Segall, Paul; Johnson, Kaj; Lisowski, Michael; Miklius, Asta

    2002-02-28

    One of the greatest hazards associated with oceanic volcanoes is not volcanic in nature, but lies with the potential for catastrophic flank failure. Such flank failure can result in devastating tsunamis and threaten not only the immediate vicinity, but coastal cities along the entire rim of an ocean basin. Kilauea volcano on the island of Hawaii, USA, is a potential source of such flank failures and has therefore been monitored by a network of continuously recording geodetic instruments, including global positioning system (GPS) receivers, tilt meters and strain meters. Here we report that, in early November 2000, this network recorded transient southeastward displacements, which we interpret as an episode of aseismic fault slip. The duration of the event was about 36 hours, it had an equivalent moment magnitude of 5.7 and a maximum slip velocity of about 6[?]cm per day. Inversion of the GPS data reveals a shallow-dipping thrust fault at a depth of 4.5[?]km that we interpret as the down-dip extension of the Hilina Pali--Holei Pali normal fault system. This demonstrates that continuously recording geodetic networks can detect accelerating slip, potentially leading to warnings of volcanic flank collapse.

  14. Hazard potential of volcanic flank collapses raised by new megatsunami evidence

    PubMed Central

    Ramalho, Ricardo S.; Winckler, Gisela; Madeira, José; Helffrich, George R.; Hipólito, Ana; Quartau, Rui; Adena, Katherine; Schaefer, Joerg M.

    2015-01-01

    Large-scale gravitational flank collapses of steep volcanic islands are hypothetically capable of triggering megatsunamis with highly catastrophic effects. Yet, evidence for the generation and impact of collapse-triggered megatsunamis and their high run-ups remains scarce or is highly controversial. Therefore, doubts remain on whether island flank failures truly generate enough volume flux to trigger giant tsunamis, leading to diverging opinions concerning the real hazard potential of such collapses. We show that one of the most prominent oceanic volcanoes on Earth—Fogo, in the Cape Verde Islands—catastrophically collapsed and triggered a megatsunami with devastating effects ~73,000 years ago. Our deductions are based on the recent discovery and cosmogenic 3He dating of tsunamigenic deposits found on nearby Santiago Island, which attest to the impact of this giant tsunami and document wave run-up heights exceeding 270 m. The evidence reported here implies that Fogo’s flank failure involved at least one fast and voluminous event that led to a giant tsunami, in contrast to what has been suggested before. Our observations therefore further demonstrate that flank collapses may indeed catastrophically happen and are capable of triggering tsunamis of enormous height and energy, adding to their hazard potential. PMID:26601287

  15. Window type: paired 2x4 multipaned steel windows flanked by 1x4 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: paired 2x4 multipaned steel windows flanked by 1x4 multipaned steel casements, breaking building corner. Raised panel door front entry also illustrated. Ground floor detail Building 19, facing north - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  16. Window type: 4x4 multipaned steel window flanked by 1x4 multipaned ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: 4x4 multipaned steel window flanked by 1x4 multipaned steel, casements. Concrete stoop, entry overhang and pipe rail detail also illustrated. Building 36, facing northwest - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  17. Window type: paired 3x2 multipaned steel window flanked by 1x3 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: paired 3x2 multipaned steel window flanked by 1x3 multipaned steel casements, breaking building corner. Broad overhanging eave also illustrated. Second story detail. Building 13, facing east - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  18. The submarine flanks of Anatahan Volcano, commonwealth of the Northern Mariana Islands

    NASA Astrophysics Data System (ADS)

    Chadwick, William W.; Embley, Robert W.; Johnson, Paul D.; Merle, Susan G.; Ristau, Shannon; Bobbitt, Andra

    2005-08-01

    The submarine flanks of Anatahan volcano were surveyed comprehensively for the first time in 2003 and 2004 with multibeam and sidescan sonar systems. A geologic map based on the new bathymetry and backscatter data shows that 67% of the volcano's submarine flanks are covered with volcaniclastic debris and 26% is lava flows, cones, and bedrock outcrops. The island of Anatahan is only 1% of the volume of the entire volcano, which has a height from its submarine base of 3700 m and an average diameter of ˜35 km. NE Anatahan is a prominent satellite volcano located 10 km NE of the island, but it is only 6% of Anatahan's volume (40 km 3 vs. 620 km 3). Seventy-eight submarine eruptive vents are mapped associated with lava flows and cones between depths of 350 and 2950 m, and 80% of these vents are located in a cluster on the east flank of the volcano. The distribution of cones and lava flows vs. depth suggests a possible change in eruptive style from explosive to effusive between 1500 and 2000 m. Eruptive vents below 2000 m have produced mostly lava flows. There is no evidence of major landslides on the submarine flanks of Anatahan volcano, in contrast to many basaltic islands and seamounts, suggesting that mass wasting at felsic oceanic arc volcanoes may be characterized by sediment flows of unconsolidated volcaniclastic debris instead of mass movements of relatively large intact blocks.

  19. Organic geochemistry of sediments on the flanks of Tanner and Cortes banks offshore from southern California

    USGS Publications Warehouse

    Rapp, J.B.; Kvenvolden, K.A.

    1982-01-01

    Holocene sediment, composed mainly of foram tests, occurs on the flanks of the Tanner and Cortes Banks, offshore southern California. The organic matter in this sediment differs in content and composition from the organic matter in nearby basins. Two sources of hydrocarbons are indicated: terrestrial plants and biodegraded or immature petroleum.

  20. Autoradiographic localization of tritiated dihydrotestosterone in the flank organ of the albino hamster

    SciTech Connect

    Lucky, A.W.; Eisenfeld, A.J.; Visintin, I.

    1985-02-01

    In the hamster flank organ, the growth of hair and growth of sebaceous glands are androgen-dependent functions. Although dihydrotestosterone (DHT) is known to be a potent stimulator of flank organ growth, there is no information about localization of DHT receptor sites in this organ. The purpose of this study was to use steroid autoradiography to localize DHT receptors in the hamster flank organ. Because steroid hormones are functional when translocated to nuclear receptors, nuclear localization by autoradiography defines receptor sites. In order to be able to visualize autoradiographic grains from radiolabeled androgens around hair follicles, albino hamsters were studied to avoid confusion between the grains and pigment granules which are abundant in the more common Golden Syrian hamster. Mature male hamsters castrated 24 hours earlier were given tritium-labeled dihydrotestosterone ( (/sup 3/H)DHT). Using the technique of thaw-mount steroid autoradiography, 4-micron unfixed frozen sections were mounted in the dark onto emulsion-coated glass slides and allowed to develop for 4-6 months. (/sup 3/H)DHT was found to be concentrated over sebocyte nuclei. The label was present peripherally as well as in differentiating sebocytes. There was no nuclear localization of (/sup 3/H)DHT in animals pretreated with excessive quantities of unlabeled DHT. Steroid metabolites of (/sup 3/H) DHT were assessed by thin-layer chromatography in paired tissue samples. Most of the label remained with DHT. Uptake was inhibited in the flank organ of hamsters pretreated with unlabeled DHT.

  1. Flanking Magnitudes: Dissociation between Numerosity and Numerical Value in a Selective Attention Task

    ERIC Educational Resources Information Center

    Naparstek, Sharon; Safadi, Ziad; Lichtenstein-Vidne, Limor; Henik, Avishai

    2015-01-01

    The current research examined whether peripherally presented numerical information can affect the speed of number processing. In 2 experiments, participants were presented with a target matrix flanked by a distractor matrix and were asked to perform a comparative judgment (i.e., decide whether the target was larger or smaller than the reference…

  2. Piggyback tectonics: Long-term growth of Kilauea on the south flank of Mauna Loa

    USGS Publications Warehouse

    Lipman, Peter W.; Sisson, Thomas W.; Coombs, Michelle L.; Calvert, Andrew T.; Kimura, Jun-Ichi

    2006-01-01

    Present-day Kilauea is the more dynamic edifice, but prior to inception of Kilauea and during its early growth, Mauna Loa is inferred to have undergone intense volcano spreading, involving the Kaoiki–Honuapo fault system (considered a geometric analog of the Hilina system on Kilauea). Cumulative deformation of Mauna Loa's south flank during growth of Kilauea since 200–300 ka is estimated to have involved > 10 km of seaward spreading, displacing the rift zones of Kīlauea while its deep plumbing system and summit magma reservoir remained nearly fixed in space. Kilauea's rift zones, rather than migrating southward with time solely due to dike emplacement preferentially on the mobile seaward side, alternatively are interpreted to have been transported passively southward, “piggyback” style, during shield-stage growth of Kilauea as a blister on the still-mobile south flank of Mauna Loa. Such an evolution of Kilauea accounts for the arcuate geometry of the present-day rift zones, proximity of the summit magma supply to the exposed flank of Mauna Loa, initial submarine growth of the ancestral edifice, and present-day location of Mauna Loa rocks at shallow depth beneath the south flank of Kilauea.

  3. Cloning flanking sequence by single-primer PCR in transgenic plants.

    PubMed

    Ma, J; Wang, Y P; Ren, S; Zhang, Z; Lu, S; Wang, P W

    2014-10-20

    The insertion position of exogenous genes in plant genomes is usually identified by adapter ligation-mediated polymerase chain reaction (PCR), thermal asymmetric interlaced PCR, and restriction site extension PCR in transgenic plant research. However, these methods have various limitations, such as the complexity of designing primers and time-consuming and multiple-step procedures. The goal of this study was to establish an easier, more rapid, and more accurate method to clone flanking sequence using single-primer PCR in transgenic plants. Unknown flanking genome sequences in transgenic plants, including those in tobacco, soybean, rice, and maize, were cloned using the single-primer PCR method established in this study, with the Bar gene as the anchor gene. The primer 1 (P1), P2, and P3 PCRs obtained 4 sequences, and the completely correct flanking sequence of 508 bp that was obtained in the P3 PCR was verified by sequencing analysis. The single-primer PCR is more rapid and accurate than conventional methods, justifying its application widely in cloning flanking sequences in transgenic plants.

  4. Surgical Tooth Implants, Combat and Field.

    DTIC Science & Technology

    1977-11-01

    assisted by Mr. Larry G. McCoy, We are gratefully indebted to our dental consultants from The Ohio State University , College of Dentistry: Dr...SURGICAL TOOTH IMPLANTS , COMBAT AND FIELD by Craig R. Hassler and Larry G. McCoy BACKGROUND Research interest in dental restorations has continued...terman, R.B., and Marshall , R.P. , “ Dental Anchors of Non-Natural Design Implanted In Miniature Swine ” , J. Dent. Res., 52, 124 (1973). (11) Mills

  5. Enamel alteration following tooth bleaching and remineralization.

    PubMed

    Coceska, Emilija; Gjorgievska, Elizabeta; Coleman, Nichola J; Gabric, Dragana; Slipper, Ian J; Stevanovic, Marija; Nicholson, John W

    2016-06-01

    The purpose of this study was to compare the effects of professional tooth whitening agents containing highly concentrated hydrogen peroxide (with and without laser activation), on the enamel surface; and the potential of four different toothpastes to remineralize any alterations. The study was performed on 50 human molars, divided in two groups: treated with Opalescence(®) Boost and Mirawhite(®) Laser Bleaching. Furthermore, each group was divided into five subgroups, a control one and 4 subgroups remineralized with: Mirasensitive(®) hap+, Mirawhite(®) Gelleѐ, GC Tooth Mousse™ and Mirafluor(®) C. The samples were analysed by SEM/3D-SEM-micrographs, SEM/EDX-qualitative analysis and SEM/EDX-semiquantitative analysis. The microphotographs show that both types of bleaching cause alterations: emphasized perikymata, erosions, loss of interprizmatic substance; the laser treatment is more aggressive and loss of integrity of the enamel is determined by shearing off the enamel rods. In all samples undergoing remineralization deposits were observed, those of toothpastes based on calcium phosphate technologies seem to merge with each other and cover almost the entire surface of the enamel. Loss of integrity and minerals were detected only in the line-scans of the sample remineralized with GC Tooth Mousse™. The semiquantitative EDX analysis of individual elements in the surface layer of the enamel indicates that during tooth-bleaching with HP statistically significant loss of Na and Mg occurs, whereas the bleaching in combination with a laser leads to statistically significant loss of Ca and P. The results undoubtedly confirm that teeth whitening procedures lead to enamel alterations. In this context, it must be noted that laser bleaching is more aggressive for dental substances. However, these changes are reversible and can be repaired by application of remineralization toothpastes.

  6. Bivalent histone modifications during tooth development.

    PubMed

    Zheng, Li-Wei; Zhang, Bin-Peng; Xu, Ruo-Shi; Xu, Xin; Ye, Ling; Zhou, Xue-Dong

    2014-12-01

    Histone methylation is one of the most widely studied post-transcriptional modifications. It is thought to be an important epigenetic event that is closely associated with cell fate determination and differentiation. To explore the spatiotemporal expression of histone H3 lysine 4 trimethylation (H3K4me3) and histone H3 lysine 27 trimethylation (H3K27me3) epigenetic marks and methylation or demethylation transferases in tooth organ development, we measured the expression of SET7, EZH2, KDM5B and JMJD3 via immunohistochemistry and quantitative polymerase chain reaction (qPCR) analysis in the first molar of BALB/c mice embryos at E13.5, E15.5, E17.5, P0 and P3, respectively. We also measured the expression of H3K4me3 and H3K27me3 with immunofluorescence staining. During murine tooth germ development, methylation or demethylation transferases were expressed in a spatial-temporal manner. The bivalent modification characterized by H3K4me3 and H3K27me3 can be found during the tooth germ development, as shown by immunofluorescence. The expression of SET7, EZH2 as methylation transferases and KDM5B and JMJD3 as demethylation transferases indicated accordingly with the expression of H3K4me3 and H3K27me3 respectively to some extent. The bivalent histone may play a critical role in tooth organ development via the regulation of cell differentiation.

  7. Atomic force microscopy study of tooth surfaces.

    PubMed

    Farina, M; Schemmel, A; Weissmüller, G; Cruz, R; Kachar, B; Bisch, P M

    1999-03-01

    Atomic force microscopy (AFM) was used to study tooth surfaces in order to compare the pattern of particle distribution in the outermost layer of the tooth surfaces. Human teeth and teeth from a rodent (Golden hamster), from a fish (piranha), and from a grazing mollusk (chiton) with distinct feeding habits were analyzed in terms of particle arrangement, packing, and size distribution. Scanning electron microscopy and transmission electron microscopy were used for comparison. It was found that AFM gives high-contrast, high-resolution images and is an important tool as a source of complementary and/or new structural information. All teeth were cleaned and some were etched with acidic solutions before analysis. It was observed that human enamel (permanent teeth) presents particles tightly packed in the outer surface, whereas enamel from the hamster (continuously growing teeth) shows particles of less dense packing. The piranha teeth have a thin cuticle covering the long apatite crystals of the underlying enameloid. This cuticle has a rough surface of particles that have a globular appearance after the brief acidic treatment. The similar appearance of the in vivo naturally etched tooth surface suggests that the pattern of globule distribution may be due to the presence of an organic material. Elemental analysis of this cuticle indicated that calcium, phosphorus, and iron are the main components of the structure while electron microdiffraction of pulverized cuticle particles showed a pattern consistent with hydroxyapatite. The chiton mineralized tooth cusp had a smooth surface in an unabraded region and a very rough structure with the magnetite crystals (already known to make part of the structure) protruding from the surface. It was concluded that the structures analyzed are optimized for efficiency in feeding mechanism and life span of the teeth.

  8. Ectopic Premolar Tooth in the Sigmoid Notch

    PubMed Central

    Akgül, H. M.; Bayrakdar, I. S.

    2016-01-01

    Impaction of a mandibular premolar is relatively uncommon. Ectopic placement is more unusual and there has been no discussion in the literature of an ectopic mandibular premolar in the coronoid process. In this case report, we present an impacted ectopic mandibular permanent premolar in the sigmoid notch (incisura mandibulae) region. Etiology of the tooth and treatment options are discussed and illustrated by Cone Beam Computed Tomography (CBCT) images. PMID:27547475

  9. Analogue modelling of flank dynamics at Mount Etna, Italy: first results

    NASA Astrophysics Data System (ADS)

    Norini, G.; Acocella, V.; Neri, M.

    2009-04-01

    Mount Etna shows one of the most relevant case of active flank dynamics along its East and South-East sectors, with some well-known tectonic structures, such as the Pernicana fault, and evident morphologies, such as the Valle del Bove depression. Factors governing this flank dynamics are still matter of debate. Among these, the most important recognized by previous Authors are the topography, intrusion of a plutonic complex in the basement, rising of magma in the volcanic edifice, regional tectonics, low cohesion layers in the volcano basement, and pore pressure. In this study, a first set of analogue models of the complex flank dynamics of Mount Etna was conducted, and the experiments were analyzed for deformation characteristics. Several experiments were run to account for the role of each factor or combination of factors on the flank dynamics of the volcano. The modeling apparatus consisted of a sand cone on a sand base simulating the volcanic edifice and its basement. Sand used for the experiments was a mixture of high cohesion crushed silica sand and low cohesion glass microspheres. Alternated layers with different cohesion were used to account for the crustal structure of the basement. Geometry of the experiments was designated to simulate the topographic gradient at the eastern base of the volcano. Injections of high viscosity silly putty and low viscosity vegetable oil were used to model respectively the growth of an intrusive complex below the volcano and the rising of magma inside the deformed volcanic edifice. Some experiments were conducted on a sheared basal layer to reproduce the effect of the regional tectonics on the volcano flank dynamics. Finally, injection of compressed air in the model allows to simulate the pore pressure and its capability to reduce shear strength of the analogue granular materials. We used a high resolution laser scanner to trace surface deformation as function of the physical conditions of the models. The three

  10. Role of olivine cumulates in destabilizing the flanks of Hawaiian volcanoes

    USGS Publications Warehouse

    Clague, D.A.; Denlinger, R.P.

    1994-01-01

    The south flank of Kilauea Volcano is unstable and has the structure of a huge landslide; it is one of at least 17 enormous catastrophic landslides shed from the Hawaiian Islands. Mechanisms previously proposed for movement of the south flank invoke slip of the volcanic pile over seafloor sediments. Slip on a low friction de??collement alone cannot explain why the thickest and widest sector of the flank moves more rapidly than the rest, or why this section contains a 300 km3 aseismic volume above the seismically defined de??collement. It is proposed that this aseismic volume, adjacent to the caldera in the direction of flank slip, consists of olivine cumulates that creep outward, pushing the south flank seawards. Average primary Kilauea tholeiitic magma contains about 16.5 wt.% MgO compared with an average 10 wt.% MgO for erupted subaerial and submarine basalts. This difference requires fractionation of 17 wt.% (14 vol.%) olivine phenocrysts that accumulate near the base of the magma reservoir where they form cumulates. Submarine-erupted Kilauea lavas contain abundant deformed olivine xenocrysts derived from these cumulates. Deformed dunite formed during the tholeiitic shield stage is also erupted as xenoliths in subsequent alkalic lavas. The deformation structures in olivine xenocrysts suggest that the cumulus olivine was densely packed, probably with as little as 5-10 vol.% intercumulus liquid, before entrainment of the xenocrysts. The olivine cumulates were at magmatic temperatures (>1100??C) when the xenocrysts were entrained. Olivine at 1100??C has a rheology similar to ice, and the olivine cumulates should flow down and away from the summit of the volcano. Flow of the olivine cumulates places constant pressure on the unbuttressed seaward flank, leading to an extensional region that localizes deep intrusions behind the flank; these intrusions add to the seaward push. This mechanism ties the source of gravitational instability to the caldera complex and deep

  11. Developmental biology and building a tooth.

    PubMed

    Thesleff, Irma

    2003-09-01

    During the last 15 years, we have started to understand tooth development at the gene level. The list of genes known to regulate the position, shape, or number of teeth is lengthening rapidly. Interestingly, so far all these genes have important functions in the mediation of cell communication, which is generally considered the most important mechanism driving embryonic development. The communication is mediated by small signal molecules that are sent to nearby cells, thereby affecting their behavior and advancing differentiation. There are dozens of different signals and their receptors and target genes, which together form complicated signaling networks. The defects in several human conditions affecting tooth development have been identified recently, and these genes have turned out to be necessary components of signaling networks. Experimental studies using transgenic mice as models for human syndromes such as ectodermal and cleidocranial dysplasia have pinpointed the exact roles of the disease genes and indicated ways for possible new therapies. It is also possible that by combining the knowledge of molecular regulation of tooth development with the recent breakthroughs in stem cell research, dreams of building new teeth in dental practice may come true in the future.

  12. Orthodontic Tooth Movement with Clear Aligners

    PubMed Central

    Drake, Carl T.; McGorray, Susan P.; Dolce, Calogero; Nair, Madhu; Wheeler, Timothy T.

    2012-01-01

    Clear aligners provide a convenient model to measure orthodontic tooth movement (OTM). We examined the role of in vivo aligner material fatigue and subject-specific factors in tooth movement. Fifteen subjects seeking orthodontic treatment at the University of Florida were enrolled. Results were compared with data previously collected from 37 subjects enrolled in a similar protocol. Subjects were followed prospectively for eight weeks. An upper central incisor was programmed to move 0.5 mm. every two weeks using clear aligners. A duplicate aligner was provided for the second week of each cycle. Weekly polyvinyl siloxane (PVS) impressions were taken, and digital models were fabricated to measure OTM. Initial and final cone beam computed tomography (CBCT) images were obtained to characterize OTM. Results were compared to data from a similar protocol, where subjects received a new aligner biweekly. No significant difference was found in the amount of OTM between the two groups, with mean total OTM of 1.11 mm. (standard deviation (SD) 0.30) and 1.07 mm. (SD 0.33) for the weekly aligner and biweekly control groups, respectively (P = 0.72). Over eight weeks, in two-week intervals, material fatigue does not play a significant role in the rate or amount of tooth movement. PMID:22928114

  13. Iatrogenic traumatic brain injury during tooth extraction.

    PubMed

    Troxel, Mark

    2015-01-01

    An 8 yr old spayed female Yorkshire terrier was referred for evaluation of progressive neurological signs after a routine dental prophylaxis with tooth extractions. The patient was circling to the left and blind in the right eye with right hemiparesis. Neurolocalization was to the left forebrain. MRI revealed a linear tract extending from the caudal oropharynx, through the left retrobulbar space and frontal lobe, into the left parietal lobe. A small skull fracture was identified in the frontal bone through which the linear tract passed. Those findings were consistent with iatrogenic trauma from slippage of a dental elevator during extraction of tooth 210. The dog was treated empirically with clindamycin. The patient regained most of its normal neurological function within the first 4 mo after the initial injury. Although still not normal, the dog has a good quality of life. Traumatic brain injury is a rarely reported complication of extraction. Care must be taken while performing dental cleaning and tooth extraction, especially of the maxillary premolar and molar teeth to avoid iatrogenic damage to surrounding structures.

  14. Mechanics analysis of molar tooth splitting.

    PubMed

    Barani, Amir; Chai, Herzl; Lawn, Brian R; Bush, Mark B

    2015-03-01

    A model for the splitting of teeth from wedge loading of molar cusps from a round indenting object is presented. The model is developed in two parts: first, a simple 2D fracture mechanics configuration with the wedged tooth simulated by a compact tension specimen; second, a full 3D numerical analysis using extended finite element modeling (XFEM) with an embedded crack. The result is an explicit equation for splitting load in terms of indenter radius and key tooth dimensions. Fracture experiments on extracted human molars loaded axially with metal spheres are used to quantify the splitting forces and thence to validate the model. The XFEM calculations enable the complex crack propagation, initially in the enamel coat and subsequently in the interior dentin, to be followed incrementally with increasing load. The fracture evolution is shown to be stable prior to failure, so that dentin toughness, not strength, is the controlling material parameter. Critical conditions under which tooth splitting in biological and dental settings are likely to be met, however rare, are considered.

  15. Influence of musical instruments on tooth positions.

    PubMed

    Herman, E

    1981-08-01

    A 2-year longitudinal investigation was conducted at five New York City junior high schools on 11- to 13-year-old children starting instrumental music education to determine what tooth movement, if any, resulted from the playing of certain musical instruments. Questionnaires, interviews, oral examinations, and dental casts were used at the start of instrumental study, after one year, and then after a second year. Statistically significant anterior tooth movements occurred in an overwhelming majority of the instrumentalists, while negligible movements were recorded for the controls over this period. As a result of this study, certain recommendations can be made by dentists when they are asked to suggest instruments which are dentally suited for children. In most cases they can suggest more than one instrument which would be of benefit dentally to the individual child, especially in the increase or reduction of overjet and overbite. The playing of the correct musical instrument can serve as an adjunct to the dentist or orthodontist in trying to accomplish certain tooth movements.

  16. Submarine geology of Hana Ridge and Haleakala Volcano's northeast flank, Maui

    USGS Publications Warehouse

    Eakins, Barry W.; Robinson, Joel E.

    2006-01-01

    We present a morphostructural analysis of the submarine portions of Haleakala Volcano and environs, based upon a 4-year program of geophysical surveys and submersible explorations of the underwater flanks of Hawaiian volcanoes that was conducted by numerous academic and governmental research organizations in Japan and the U.S. and funded primarily by the Japan Agency for Marine–Earth Science and Technology. A resulting reconnaissance geologic map features the 135-km-long Hana Ridge, the 3000 km2 Hana slump on the volcano's northeast flank, and island-surrounding terraces that are the submerged parts of volcanic shields. Hana Ridge below 2000 m water depth exhibits the lobate morphology typical of the subaqueously erupted parts of Hawaiian rift zones, with some important distinctions: namely, subparallel crestlines, which we propose result from the down-rift migration of offsets in the dike intrusion zone, and an amphitheater at its distal toe, where a submarine landslide has embayed the ridge tip. Deformation of Haleakala's northeast flank is limited to that part identified as the Hana slump, which lies downslope from the volcano's submerged shield, indicating that flank mobility is also limited in plan, inconsistent with hypothesized volcanic spreading driven by rift-zone dilation. The leading edge of the slump has transverse basins and ridges that resemble the thrust ramps of accretionary prisms, and we present a model to describe the slump's development that emphasizes the role of coastally generated fragmental basalt on gravitational instability of Haleakala's northeast flank and that may be broadly applicable to other ocean-island slumps.

  17. Radiometric Dating of Large Volume Flank Collapses in The Lesser Antilles Arc.

    NASA Astrophysics Data System (ADS)

    Quidelleur, X.; Samper, A.; Boudon, G.; Le Friant, A.; Komorowski, J.

    2004-12-01

    It is now admitted that flank collapses, probably triggered by magmatic inflation and/or gravitational collapses, is a recurrent process of the evolution of the Lesser Antilles Arc volcanoes. Large magnitude debris avalanche deposits have been identified offshore, in the Grenada basin (Deplus et al., 2001; Le Friant et al., 2001). The widest extensions have been observed off the coast of Dominica and St Lucia, with associated volumes up to 20 km3. Another large-scale event, with marine evidences probably covered by sediments and latter flank collapses, has been inferred onland from morphological evidences and characteristic deposits of the Carbets structure in Martinique. We present radiometric dating of these three major events using the K-Ar Cassignol-Gillot technique performed on selected groundmass. Both volcanic formations preceding flank collapses (remnants of the horseshoe shaped structures or basal lava flows) and following landslides (lava domes) have been dated. In the Qualibou depression of St. Lucia, the former structure has been dated at 1096+-16 ka and the collapse constrained by dome emplacement prior to 97+-2 ka (Petit Piton). In Dominica, several structures have been associated with repetitive flank collapse events inferred from marine data (Le Friant et al., 2002). The Plat-Pays event probably occurred after 96+-2 ka. Inside the inherited depression, Scotts Head, which is interpreted as a proximal pluri-kilometric megabloc from the Soufriere avalanche, has been dated at 14+-1 ka, providing an older bound for this event. In Martinique Island, three different domes within the Carbets structure have been dated at 335+-5 ka. Assuming a rapid magma emplacement following pressure release due to deloading, this constrains the age of this high magnitude event. Finally, these results obtained from three of the most voluminous flank collapses provide constraints to estimate the recurrence of these events, which represent one of the major hazards associated

  18. Tooth brushing habits in uninstructed adults--frequency, technique, duration and force.

    PubMed

    Ganss, C; Schlueter, N; Preiss, S; Klimek, J

    2009-06-01

    Professional recommendations for individual oral hygiene mostly include tooth brushing at least twice daily for 2-3 min with gentle force using the Bass technique or modifications of it. This study evaluated whether habitual tooth brushing actually meets these standards. Uninstructed adults (n = 103; mean age 31 +/- 6 years; 61 female, 42 male) with habitual manual tooth brushing were given a self-administered questionnaire about the frequency of brushing and a computer system recorded their brushing technique, duration and force. The majority (79.6%) of participants brushed twice daily. The mean brushing duration was 96.6 +/- 36.0 s, the mean brushing force was 2.3 +/- 0.7 N (max. 4.1 N), and no significant differences were found for quadrants. Most subjects (73.8%) brushed with circling, 8.7% with horizontal/scrubbing, 13.6% with horizontal/circling and 3.9% with vertical/sweeping movements. Modified Bass technique was not observed. When appropriate brushing habits were defined as brushing at least twice daily for 120 s with a brushing force of less than 3 N and with circling or vertical sweeping movements, only 25.2% of the participants fulfilled all criteria, emphasising the ongoing need for oral hygiene education.

  19. Influence of tooth profile modification on spur gear dynamic tooth strain

    NASA Astrophysics Data System (ADS)

    Oswald, Fred B.; Townsend, Dennis P.

    1995-06-01

    This paper presents results of dynamic strain gage measurements performed on the NASA gear-noise rig. The experiments were part of a joint research program between NASA and the U.S. Army Research Laboratory to advance the technology of rotorcraft transmissions. Tests were performed on six sets of low contact ratio spur gears with different tooth profile modifications. Results presented include static and dynamic measurements of gear tooth strain taken over a matrix of operating conditions. The results demonstrate that a well-designed tooth profile modification can significantly reduce dynamic loads in spur gears, especially for gears which operate at high speed and under high torque. The two parabolic modifications tested were not as effective as linear modifications, possibly because the modification zone was too long.

  20. Influence of tooth profile modification on spur gear dynamic tooth strain

    NASA Technical Reports Server (NTRS)

    Oswald, Fred B.; Townsend, Dennis P.

    1995-01-01

    This paper presents results of dynamic strain gage measurements performed on the NASA gear-noise rig. The experiments were part of a joint research program between NASA and the U.S. Army Research Laboratory to advance the technology of rotorcraft transmissions. Tests were performed on six sets of low contact ratio spur gears with different tooth profile modifications. Results presented include static and dynamic measurements of gear tooth strain taken over a matrix of operating conditions. The results demonstrate that a well-designed tooth profile modification can significantly reduce dynamic loads in spur gears, especially for gears which operate at high speed and under high torque. The two parabolic modifications tested were not as effective as linear modifications, possibly because the modification zone was too long.

  1. Local Synthesis and Tooth Contact Analysis of Face-Milled, Uniform Tooth Height Spiral Bevel Gears

    NASA Technical Reports Server (NTRS)

    Litvin, F. L.; Wang, A. G.

    1996-01-01

    Face-milled spiral bevel gears with uniform tooth height are considered. An approach is proposed for the design of low-noise and localized bearing contact of such gears. The approach is based on the mismatch of contacting surfaces and permits two types of bearing contact either directed longitudinally or across the surface to be obtained. Conditions to avoid undercutting were determined. A Tooth Contact Analysis (TCA) was developed. This analysis was used to determine the influence of misalignment on meshing and contact of the spiral bevel gears. A numerical example that illustrates the theory developed is provided.

  2. Generation of spiral bevel gears with conjugate tooth surfaces and tooth contact analysis

    NASA Technical Reports Server (NTRS)

    Litvin, Faydor L.; Tsung, Wei-Jiung; Lee, Hong-Tao

    1987-01-01

    A new method for generation of spiral bevel gears is proposed. The main features of this method are as follows: (1) the gear tooth surfaces are conjugated and can transform rotation with zero transmission errors; (2) the tooth bearing contact is localized; (3) the center of the instantaneous contact ellipse moves in a plane that has a fixed orientation; (4) the contact normal performs in the process of meshing a parallel motion; (5) the motion of the contact ellipse provides improved conditions of lubrication; and (6) the gears can be manufactured by use of Gleason's equipment.

  3. The cracked-tooth syndrome and fractured posterior cusp.

    PubMed

    Snyder, D E

    1976-06-01

    1. Even from such a small sample as that reported in this study, it is evident that the fractured cusp and cracked-tooth syndrome are common problems. The large number of fractured cusps compared to the cracked-tooth syndrome suggests that some of the cases of fractured cusp could have been diagnosed earlier. 2. It is most important that dentists be aware of the cracked-tooth syndrome in order to relieve the patient's discomfort, prevent the possible eventual loss of the pulp or tooth, and avoid unnecessary and possibly damaging treatment for misdiagnosed facial pain. 3. Conservation of tooth structure in restorative procedures is most necessary in order to prevent the cracked-tooth syndrome or fractured posterior cusp.

  4. The interactions between attrition, abrasion and erosion in tooth wear.

    PubMed

    Shellis, R Peter; Addy, Martin

    2014-01-01

    Tooth wear is the result of three processes: abrasion (wear produced by interaction between teeth and other materials), attrition (wear through tooth-tooth contact) and erosion (dissolution of hard tissue by acidic substances). A further process (abfraction) might potentiate wear by abrasion and/or erosion. Knowledge of these tooth wear processes and their interactions is reviewed. Both clinical and experimental observations show that individual wear mechanisms rarely act alone but interact with each other. The most important interaction is the potentiation of abrasion by erosive damage to the dental hard tissues. This interaction seems to be the major factor in occlusal and cervical wear. The available evidence is insufficient to establish whether abfraction is an important contributor to tooth wear in vivo. Saliva can modulate erosive/abrasive tooth wear, especially through formation of pellicle, but cannot prevent it.

  5. Tooth form design supporting system in module design

    NASA Astrophysics Data System (ADS)

    Nagasawa, Junji; Namiki, Ryou; Tanaka, Souichi; Aoyama, Shigeru

    A lot of time was spent in designing the tooth form because there was no Computer Aided Design (CAD) system suitable for designing the tooth form of gears. A CAD system to support the tooth form design to promote efficiency of the tooth form design of gears for a wristwatch was developed. This system can perform calculation of torque transmission factor of gears, automatic drawing of tooth form drawing, and engagement simulation, and by utilizing this system the tooth form can be designed in less than one fourth of the time required by the conventional method. The characteristics of the system used to calculate the torque transmission factor of a pair of gears are summarized and the displayed results are shown.

  6. Sonosurgery for atraumatic tooth extraction: a clinical report.

    PubMed

    Papadimitriou, Dimitrios E V; Geminiani, Alessandro; Zahavi, Thomas; Ercoli, Carlo

    2012-12-01

    The preservation of an intact labial plate during tooth extraction is a critical determinant of whether an immediate implant can be placed and is also an important predictor of the esthetic result. The purpose of this clinical report was to present a method for atraumatic tooth extraction by using an air-driven sonic instrument with specially designed inserts. This surgical technique provides the clinician with an efficient method for atraumatic tooth extraction and preservation of an intact labial plate.

  7. Three-dimensional displacements of a large volcano flank movement during the May 2010 eruptions at Pacaya Volcano, Guatemala

    NASA Astrophysics Data System (ADS)

    Schaefer, L. N.; Wang, T.; Escobar-Wolf, R.; Oommen, T.; Lu, Z.; Kim, J.; Lundgren, P. R.; Waite, G. P.

    2017-01-01

    Although massive flank failure is fairly common in the evolution of volcanoes, measurements of flank movement indicative of instability are rare. Here 3-D displacements from airborne radar amplitude images derived using an amplitude image pixel offset tracking technique show that the west and southwest flanks of Pacaya Volcano in Guatemala experienced large ( 4 m), discrete landsliding that was ultimately aborted. Pixel offset tracking improved measurement recovery by nearly 50% over classic interferometric synthetic aperture radar techniques, providing unique measurements at the event. The 3-D displacement field shows that the flank moved coherently downslope along a complex failure surface involving both rotational and along-slope movement. Notably, the lack of continuous movement of the slide in the years leading up to the event emphasizes that active movement should not always be expected at volcanoes for which triggering factors (e.g., magmatic intrusions and eruptions) could precipitate sudden major flank instability.

  8. Computer-aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Shuo, Hung Chang; Huston, Ronald L.; Coy, John J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  9. Computer aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.; Coy, J. J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  10. Tooth positioners and their effects on treatment outcome

    PubMed Central

    Pravindevaprasad, A.; Therese, Beena Agnes

    2013-01-01

    Malocclusion can also be corrected by means of clear removable appliances called as “tooth positioners” or “aligners”. A tooth positioner is used to control settling and to minimize or eliminate relapse of the teeth after an orthodontic treatment. In this article, a complete review of the objectives, course of treatment, fabrication, and the materials used for fabrication of tooth positioners along with their importance and disadvantages were discussed. Tooth positioners did improve the overall orthodontic treatment outcome as quantified by the ABO (American Board of orthodontics) objective scoring method. But once the initial occlusal contact was achieved, the vertical movement of teeth was found to be inhibited. PMID:24082720

  11. Realizing actual feedback control of complex network

    NASA Astrophysics Data System (ADS)

    Tu, Chengyi; Cheng, Yuhua

    2014-06-01

    In this paper, we present the concept of feedbackability and how to identify the Minimum Feedbackability Set of an arbitrary complex directed network. Furthermore, we design an estimator and a feedback controller accessing one MFS to realize actual feedback control, i.e. control the system to our desired state according to the estimated system internal state from the output of estimator. Last but not least, we perform numerical simulations of a small linear time-invariant dynamics network and a real simple food network to verify the theoretical results. The framework presented here could make an arbitrary complex directed network realize actual feedback control and deepen our understanding of complex systems.

  12. Epithelial topography for repetitive tooth formation

    PubMed Central

    Gaete, Marcia; Fons, Juan Manuel; Popa, Elena Mădălina; Chatzeli, Lemonia; Tucker, Abigail S.

    2015-01-01

    ABSTRACT During the formation of repetitive ectodermally derived organs such as mammary glands, lateral line and teeth, the tissue primordium iteratively initiates new structures. In the case of successional molar development, new teeth appear sequentially in the posterior region of the jaw from Sox2+ cells in association with the posterior aspect of a pre-existing tooth. The sequence of molar development is well known, however, the epithelial topography involved in the formation of a new tooth is unclear. Here, we have examined the morphology of the molar dental epithelium and its development at different stages in the mouse in vivo and in molar explants. Using regional lineage tracing we show that within the posterior tail of the first molar the primordium for the second and third molar are organized in a row, with the tail remaining in connection with the surface, where a furrow is observed. The morphology and Sox2 expression of the tail retains characteristics reminiscent of the earlier stages of tooth development, such that position along the A-P axes of the tail correlates with different temporal stages. Sox9, a stem/progenitor cell marker in other organs, is expressed mainly in the suprabasal epithelium complementary with Sox2 expression. This Sox2 and Sox9 expressing molar tail contains actively proliferating cells with mitosis following an apico-basal direction. Snail2, a transcription factor implicated in cell migration, is expressed at high levels in the tip of the molar tail while E-cadherin and laminin are decreased. In conclusion, our studies propose a model in which the epithelium of the molar tail can grow by posterior movement of epithelial cells followed by infolding and stratification involving a population of Sox2+/Sox9+ cells. PMID:26538639

  13. Cracked tooth syndrome. Part 2: restorative options for the management of cracked tooth syndrome.

    PubMed

    Banerji, S; Mehta, S B; Millar, B J

    2010-06-01

    The second of this two part series on 'cracked tooth syndrome' will focus on the available methods for the immediate, intermediate and definitive management of patients affected by this condition. Included in this article is a comprehensive account of the relative merits/drawbacks of various restorative materials and their respective techniques of application for the treatment of symptomatic, incompletely fractured posterior teeth.

  14. Genomic organization and 5{prime}-flanking DNA sequence of the murine stomatin gene (Epb72)

    SciTech Connect

    Gallagher, P.G.; Turetsky, T.; Mentzer, W.C. |

    1996-06-15

    Stomatin is a poorly understood integral membrane protein that is absent from the erythrocyte membranes of many patients with hereditary stomatocytosis. This report describes the cloning of the murine stomatin chromosomal gene, determination of its genomic structure, and characterization of the 5{prime}-flanking genomic DNA sequences. The stomatin gene is encoded by seven exons spread over {approximately}25 kb of genomic DNA. There is no concordance between the exon structure of the stomatin gene and the locations of three domains predicted on the basis of protein structure. Inspection of the 5{prime}-flanking DNA sequences reveals features of a TATA-less housekeeping gene promoter and consensus sequences for a number of potential DNA-binding proteins. 12 refs., 2 figs., 1 tab.

  15. The Silent Earthquakes of Kilauea's South Flank and their Ramifications for Catastrophic Failure

    NASA Astrophysics Data System (ADS)

    Cervelli, P. F.

    2004-12-01

    The south flank of Kilauea Volcano is one of the most actively deforming regions on the planet. GPS measurements taken there since the early 1990s show a persistent seaward migration at rates exceeding 5 cm/yr. Large earthquakes occur on Kilauea with alarming frequency. The largest in historical times, a M7.2 event in 1975, caused more than 6 m of seaward displacement in addition to 3.5 m of coastal subsidence. In the last few years, an intermediate form of south flank deformation has been observed. With slip rates of about 10 cm/day, these so-called ``silent earthquake'' are much slower than the nearly instantaneous brittle failure of normal earthquakes, but vastly faster than the creep that carries the south flank relentlessly toward the sea. Kilauea is the latest subaerial volcano in an archipelago of volcanic islands stretching back to the Kamchatka Peninsula. In just the youngest part of this chain, the modern Hawaiian islands, there are more than 70 submarine debris fields, each thought to represent an ancestral flank collapse. If these collapses occurred catastrophically, they almost certainly created tsunami large enough to inundate nearby islands and perhaps long-lived enough to threaten the entire Pacific basin. Evidence for prehistoric inundation on the Hawaiian island consists of anomalously elevated detrital coral deposits, found at several locales and interpreted as the diaspora of passing tsunami. As the youngest and most active of the subaerial Hawaiian volcanoes, it is natural to wonder if Kilauea--in particular the south flank--is the most likely place for future catastrophic collapses. Since the creation of the continuous GPS network on Kilauea in the mid-1990s, as many as four silent earthquakes have been detected. Two of these, occurring in November 2000 and July 2003, have resulted in elastic deformation fields large enough to model. The modeling shows that these events occurred on a shallow ( ˜ 5 km depth) landward dipping fault, possibly

  16. Evidence for microbial carbon and sulfur cycling in deeply buried ridge flank basalt.

    PubMed

    Lever, Mark A; Rouxel, Olivier; Alt, Jeffrey C; Shimizu, Nobumichi; Ono, Shuhei; Coggon, Rosalind M; Shanks, Wayne C; Lapham, Laura; Elvert, Marcus; Prieto-Mollar, Xavier; Hinrichs, Kai-Uwe; Inagaki, Fumio; Teske, Andreas

    2013-03-15

    Sediment-covered basalt on the flanks of mid-ocean ridges constitutes most of Earth's oceanic crust, but the composition and metabolic function of its microbial ecosystem are largely unknown. By drilling into 3.5-million-year-old subseafloor basalt, we demonstrated the presence of methane- and sulfur-cycling microbes on the eastern flank of the Juan de Fuca Ridge. Depth horizons with functional genes indicative of methane-cycling and sulfate-reducing microorganisms are enriched in solid-phase sulfur and total organic carbon, host δ(13)C- and δ(34)S-isotopic values with a biological imprint, and show clear signs of microbial activity when incubated in the laboratory. Downcore changes in carbon and sulfur cycling show discrete geochemical intervals with chemoautotrophic δ(13)C signatures locally attenuated by heterotrophic metabolism.

  17. Oceanic phosphorus imbalance: Magnitude of the mid-ocean ridge flank hydrothermal sink

    NASA Astrophysics Data System (ADS)

    Wheat, C. Geoffrey; McManus, James; Mottl, Michael J.; Giambalvo, Emily

    2003-09-01

    We present a new estimate for the crustal phosphorous sink that results from reactions among seawater, basalt, and sediment blanketing low temperature mid-ocean ridge flank hydrothermal systems. New estimates for global hydrothermal power output, sediment thickness, and the dissolved phosphate concentrations in basement formation fluids indicate that fluid flow through ridge flanks removes 2.8 × 1010 mol P yr-1. This value is larger (130%) than the riverine dissolved flux of inorganic phosphate and is as much as 35% of the sedimentary P sink. The concordant seawater flux (2.1 × 1016 kg yr-1) is 65% of the riverine fluid flux and circulates a fluid volume equivalent to the entire ocean in about 70,000 yr. Additional sampling of seafloor springs is required to further constrain the range of calculated phosphate fluxes; nevertheless the modern phosphorus budget is clearly unbalanced with total sinks outpacing sources.

  18. Stability analysis of Western flank of Cumbre Vieja volcano (La Palma) using numerical modelling

    NASA Astrophysics Data System (ADS)

    Bru, Guadalupe; Gonzalez, Pablo J.; Fernandez-Merodo, Jose A.; Fernandez, Jose

    2016-04-01

    La Palma volcanic island is one of the youngest of the Canary archipelago, being a composite volcano formed by three overlapping volcanic centers. There are clear onshore and offshore evidences of past giant landslides that have occurred during its evolution. Currently, the active Cumbre Vieja volcano is in an early development state (Carracedo et al., 2001). The study of flank instability processes aim to assess, among other hazards, catastrophic collapse and potential tsunami generation. Early studies of the potential instability of Cumbre Vieja volcano western flank have focused on the use of sparse geodetic networks (Moss et al. 1999), surface geological mapping techniques (Day et al. 1999) and offshore bathymetry (Urgeles et al. 1999). Recently, a dense GNSS network and satellite radar interferometry results indicate ground motion consistent with deep-seated creeping processes (Prieto et al. 2009, Gonzalez et al. 2010). In this work, we present a geomechanical advanced numerical model that captures the ongoing deformation processes at Cumbre Vieja. We choose the Finite Elements Method (FEM) which is based in continuum mechanics and is the most used for geotechnical applications. FEM has the ability of using arbitrary geometry, heterogeneities, irregular boundaries and different constitutive models representative of the geotechnical units involved. Our main contribution is the introduction of an inverse approach to constrain the geomechanical parameters using satellite radar interferometry displacements. This is the first application of such approach on a large volcano flank study. We suggest that the use of surface displacements and inverse methods to rigorously constrain the geomechanical model parameter space is a powerful tool to understand volcano flank instability. A particular important result of the studied case is the estimation of displaced rock volume, which is a parameter of critical importance for simulations of Cumbre Vieja tsunamigenic hazard

  19. Pediatric Charcot-Marie-Tooth disease.

    PubMed

    Jani-Acsadi, Agnes; Ounpuu, Sylvia; Pierz, Kristan; Acsadi, Gyula

    2015-06-01

    Heritable diseases of the peripheral nerves (Charcot-Marie-Tooth disease [CMT]) affect the motor units and sensory nerves, and they are among the most prevalent genetic conditions in the pediatric patient population. The typical clinical presentation includes distal muscle weakness and atrophy, but the severity and progression are largely variable. Improvements in supportive treatment have led to better preservation of patients' motor functions. More than 80 genes have been associated with CMT. These genetic discoveries, along with the developments of cellular and transgenic disease models, have allowed clinicians to better understand the disease mechanisms, which should lead to more specific treatments.

  20. Measurement of Gear Tooth Dynamic Friction

    NASA Technical Reports Server (NTRS)

    Rebbechi, Brian; Oswald, Fred B.; Townsend, Dennis P.

    1996-01-01

    Measurements of dynamic friction forces at the gear tooth contact were undertaken using strain gages at the root fillets of two successive teeth. Results are presented from two gear sets over a range of speeds and loads. The results demonstrate that the friction coefficient does not appear to be significantly influenced by the sliding reversal at the pitch point, and that the friction coefficient values found are in accord with those in general use. The friction coefficient was found to increase at low sliding speeds. This agrees with the results of disc machine testing.

  1. Germ Cell-Specific Excision of loxP-Flanked Transgenes in Rainbow Trout Oncorhynchus mykiss.

    PubMed

    Katayama, Naoto; Kume, Sachi; Hattori-Ihara, Shoko; Sadaie, Sakiko; Hayashi, Makoto; Yoshizaki, Goro

    2016-04-01

    Cre/loxP-mediated DNA excision in germ cell lineages could contribute substantially to the study of germ cell biology in salmonids, which are emerging as a model species in this field. However, a cell type-specific Cre/loxPsystem has not been successfully developed for any salmonid species. Therefore, we examined the feasibility of Cre/loxP-mediated, germ cell-specific gene excision and transgene activation in rainbow trout. Double-transgenic (wTg) progeny were obtained by mating a transgenic male carryingcrewith a transgenic female carrying thehsc-LRLGgene;crewas driven by rainbow troutvasaregulatory regions and thehsc-LRLGgene was made up of the rainbow troutheat-shock-cognate71promoter, theDsRedgene flanked by twoloxPsites, and theEgfpgene. PCR analysis, fluorescence imaging, and histological analysis revealed that excision of theloxP-flanked sequence and activation ofEgfpoccurred only in germ cells of wTg fish. However, progeny tests revealed that the excision efficiency ofloxP-flanked sequence in germ cells was low (≤3.27%). In contrast, the other wTg fish derived from two differentcre-transgenic males frequently excised theloxP-flanked sequence in germ cells (≤89.25%). Thus, we showed for the first time successful germ cell-specific transgene manipulation via the Cre/loxPsystem in rainbow trout. We anticipate that this technology will be suitable for studies of cell function through cell targeting, cell-linage tracing, and generating cell type-specific conditional gene knockouts and separately for developing sterile rainbow trout in aquaculture.

  2. Hand-assisted laparoscopic nephrectomy for xanthogranulomatous pyelonephritis with nephrocutaneous fistula after failed flank exploration.

    PubMed

    Kijvikai, Kittinut; Dissaranan, Charuspong; Chalermsanyakorn, Panas; Matchariyakul, Chaiyasit; Kochakarn, Wachira

    2006-08-01

    Xanthogranulomatous pyelonephritis presenting with nephrocutaneous fistula is a rare condition, and its treatment of choice is nephrectomy. Laparoscopic management has been proved to be challenging in these inflammatory renal conditions. However, there was no previous report in the literature regarding laparoscopic treatment of nephrocutaneous fistula especially after previous operation. In this communication, we report the first case of hand-assisted laparoscopic nephrectomy for xanthogranulomatous pyelonephritis with nephrocutaneous fistula after previous failed flank exploration.

  3. Evidence for a Mega-Tsunami Generated by Giant Flank Collapse of Fogo Volcano, Cape Verde

    NASA Astrophysics Data System (ADS)

    Ramalho, R. S.; Madeira, J.; Helffrich, G. R.; Schaefer, J. M.; Winckler, G.; Quartau, R.; Adena, K.

    2013-12-01

    Mega-tsunamis generated by ocean island flank collapses are expected to be some of the most hazardous forces of nature, yet evidence for their near-source effects and inferred high run-ups so far is scarce or hotly debated. A newly discovered deposit on the northern coast of Santiago Island (Cape Verde), however, documents the magnitude and run-up height associated with this kind of event. Additionally to chaotic conglomerates distributed from sea-level up to 100 m elevation standing on slopes as steep as 20°, the deposit comprises a number of scattered megaclasts of submarine lava flows, limestone and tuff. The megaclasts are presently located over a higher substructural slope built on younger subaerial lava flows and at elevations ranging 160-220 m a.s.l. All megaclasts correspond to lithologies that crop out exclusively in nearby cliff faces. The origin of this deposit is consequently attributed to an exceptional wave that plucked blocks from the cliff face, transported them inland and deposited them over the higher slopes of the volcanic edifice. The distribution of the megaclasts, together with the local geomorphology, is in agreement with a tsunami that approached the island edifice from the west and was refracted along its northern flank, flooding a series of northwest-oriented valleys. This suggests that the well-known flank collapse of Fogo volcano, located 55 km west of Santiago, is the most likely source, a hypothesis being tested with surface exposure dating. The inferred run-up exceeded 200 m and is consistent with numerical simulations by Paris et al. 2011, implying that the present Fogo island morphology probably developed by at least one giant flank collapse with devastating near-source effects.

  4. Evidence of sheared sills related to flank destabilization in a basaltic volcano

    NASA Astrophysics Data System (ADS)

    Berthod, C.; Famin, V.; Bascou, J.; Michon, L.; Ildefonse, B.; Monié, P.

    2016-04-01

    Piton des Neiges basaltic volcano (La Réunion) has been deeply dissected by erosion, exposing large volumes of debris avalanche deposits. To shed light on the factors that led to volcano flank destabilizations, we studied the structure, the crystallographic and magnetic fabrics of the substratum of a debris avalanche unit. This substratum is a complex of > 50 seaward-dipping sills that has been exposed by the avalanche. Structural observations show that the sill plane in contact with the avalanche is one of the latest intrusions in the sill complex. In this uppermost sill, the anisotropy of magnetic susceptibility (AMS) is correlated to the crystallographic preferred orientation of magmatic silicate minerals, allowing us to use AMS as a proxy to infer the magmatic flow. The AMS fabric across the intrusion is strongly asymmetric, which reveals that the contact sill was emplaced with a normal shear displacement of its hanging wall. The shear displacement and the magma flow in the intrusion are both directed toward the NNE, i.e. toward the sea, which is also the direction of the slope and of the debris avalanche runout. Because all the sills in the intrusion complex have a similar dip and dip direction, it is likely that several of them also underwent a cointrusive slip toward the NNE. We conclude that this cointrusive normal slip, repeated over many intrusions of the sill complex, increased the flank instability of the volcano. This incremental instability may have ended up into the observed debris avalanche deposit. At Piton de la Fournaise, the active volcano of La Réunion, sill intrusion and cointrusive flank displacement have been inferred from geophysical studies for the April 2007 eruption. By providing direct evidence of sheared sills, our study substantiates the idea that repeated sill intrusions may eventually trigger flank destabilizations in basaltic volcanoes.

  5. Hazard Potential of Volcanic Flank Collapses Raised by New Megatsunami Evidence

    NASA Astrophysics Data System (ADS)

    Ramalho, R. S.; Winckler, G.; Madeira, J.; Helffrich, G. R.; Hipólito, A.; Quartau, R.; Adena, K.; Schaefer, J. M.

    2015-12-01

    Large-scale gravitational flank collapses of steep volcanic islands are hypothetically capable of triggering megatsunamis with highly catastrophic effects. Yet evidence for the existence and impact of collapsed-triggered megatsunamis and their run-up heights remains scarce and/or is highly contentious. Therefore a considerable debate still exists over the potential magnitude of collapse-triggered tsunamis and their inherent hazard. In particular, doubts still remain whether or not large-scale flank failures typically generate enough volume flux to result in megatsunamis, or alternatively operate by slow-moving or multiple smaller episodic failures with much lower tsunamigenic potential. Here we show that one of the tallest and most active oceanic volcanoes on Earth - Fogo, in the Cape Verde Islands - collapsed catastrophically and triggered a megatsunami with devastating near-field effects ~73,000 years ago. Our deductions are based on the recent discovery and cosmogenic 3He dating of tsunamigenic deposits - comprising fields of stranded megaclasts, chaotic conglomerates, and sand sheets - found on the adjacent Santiago Island, which attest to the impact of this megatsunami and document wave run-up heights exceeding 270 m. The evidence reported here implies that Fogo's flank failure involved at least one sudden and voluminous event that resulted in a megatsunami, in contrast to what has been suggested before. Our work thus provides another line of evidence that large-scale flank failures at steep volcanic islands may indeed happen catastrophically and are capable of triggering tsunamis of enormous height and energy. This new line of evidence therefore reinforces the hazard potential of volcanic island collapses and stands as a warning that such hazard should not be underestimated, particularly in areas where volcanic island edifices are close to other islands or to highly populated continental margins.

  6. Improved predictive test for MEN2, using flanking dinucleotide repeats and RFLPs

    SciTech Connect

    Howe, J.R.; Lairmore, T.C.; Mishra, S.K.; Shenshen Dou; Veile, R.; Wells, S.A. Jr.; Donis-Keller, H. )

    1992-12-01

    Gene(s) for the autosomal dominant endocrine cancer syndromes, multiple endocrine neoplasia type 2A (MEN2A), multiple endocrine neoplasia type 2B (MEN2B), and familial medullary thyroid carcinoma (MTC1) all map to the pericentromeric region of chromosome 10. Predictive testing for the inheritance of mutant alleles in individuals at risk for these disorders has been limited by the availability of highly informative and closely linked flanking markers. The authors describe the development of eight new markers, including two PCR-based dinucleotide repeat polymorphisms and six RFLPs that flank the disease loci. One of the dinucleotide repeat markers (sJRH-1) derives from the RBP3 locus on 10q11.2 and has a PIC of .88. The other dinucleotide repeat (sTCL-1) defines a new locus, D10S176, that maps by in situ hybridization to 10p11.2 and has a PIC of .68. The authors have constructed a new genetic linkage map of the pericentromeric region of chromosome 10, on the basis of 13 polymorphisms at six loci, which places the MEN2A locus between the dinucleotide repeat markers, with odds of 5,750:1 over the next most likely position. Using this set of markers, predictive genetic testing of 130 at-risk individuals from six families segregating MEN2A revealed that 95% were jointly informative with flanking markers, representing a significant improvement in genetic testing capabilities. 42 refs., 6 figs., 3 tabs.

  7. Cloning and characterization of the 5'-flanking region of the Ehox gene

    SciTech Connect

    Lee, Woon Kyu . E-mail: wklee@yumc.yonsei.ac.kr; Kim, Yong-Man; Malik, Nasir; Ma Chang; Westphal, Heiner

    2006-03-03

    The paired-like homeobox-containing gene Ehox plays a role in embryonic stem cell differentiation and is highly expressed in the developing placenta and thymus. To understand the mechanisms of regulation of Ehox gene expression, the 5'-flanking region of the Ehox gene was isolated from a mouse BAC library. 5'-RACE analysis revealed a single transcriptional start site 130 nucleotides upstream of the translation initiation codon. Transient transfection with a luciferase reporter gene under the control of serially deleted 5'-flanking sequences revealed that the nt -84 to -68 region contained a positive cis-acting element for efficient expression of the Ehox gene. Mutational analysis of this region and oligonucleotide competition in the electrophoretic mobility shift assay revealed the presence of a CCAAT box, which is a target for transcription nuclear factor Y (NFY). NFY is essential for positive gene regulation. No tissue-specific enhancer was identified in the 1.9-kb 5'-flanking region of the Ehox gene. Ehox is expressed during the early stages of embryo development, specifically in Brain at 9.5 dpc, as well as during the late stages of embryo development. These results suggest that NFY is an essential regulatory factor for Ehox transcriptional activity, which is important for the post-implantation stage of the developing embryo.

  8. Analysis of the regions flanking the human insulin gene and sequence of an Alu family member.

    PubMed Central

    Bell, G I; Pictet, R; Rutter, W J

    1980-01-01

    The regions around the human insulin gene have been studied by heteroduplex, hybridization and sequence analysis. These studies indicated that there is a region of heterogeneous length located approximately 700 bp before the 5' end of the gene; and that the 19 kb of cloned DNA which includes the 1430 bp insulin gene as well as 5650 bp before and 11,500 bp after the gene is single copy sequence except for 500 bp located 6000 bp from the 3' end of the gene. This 500 bp segment contains a member of the Alu family of dispersed middle repetitive sequences as well as another less highly repeated homopolymeric segment. The sequence of this region was determined. This Alu repeat is bordered by 19 bp direct repeats and also contains an 83 bp sequence which is present twice. The regions flanking the human and rat I insulin genes were compared by heteroduplex analysis to localize homologous sequences in the flanking regions which could be involved in the regulation of insulin biosynthesis. The homology between the two genes is restricted to the region encoding preproinsulin and a short region of approximately 60 bp flanking the 5' side of the genes. Images PMID:6253909

  9. Dentition and tooth replacement pattern in Chalcides (Squamata; Scincidae).

    PubMed

    Delgado, Sidney; Davit-Beal, Tiphaine; Sire, Jean-Yves

    2003-05-01

    This study was undertaken as a prerequisite to investigations on tooth differentiation in a squamate, the Canarian scincid Chalcides. Our main goal was to determine whether the pattern of tooth replacement, known to be regular in lizards, could be helpful to predict accurately any stage of tooth development. A growth series of 20 laboratory-reared specimens, aged from 0.5 month after birth to about 6 years, was used. The dentition (functional and replacement teeth) was studied from radiographs of jaw quadrants. The number of tooth positions, the tooth number in relation to age and to seasons, and the size of the replacement teeth were recorded. In Chalcides, a single row of pleurodont functional teeth lies at the labial margin of the dentary, premaxillary, and maxillary. Whatever the age of the specimens, 16 tooth positions were recorded, on average, in each quadrant, suggesting that positions are maintained throughout life. Replacement teeth were numerous whatever the age and season, while the number of functional teeth was subject to variation. Symmetry of tooth development was evaluated by comparing teeth two by two from the opposite side in the four jaw quadrants of several specimens. Although the relative size of some replacement teeth fitted perfectly, the symmetry criterion was not reliable to predict the developmental stage of the opposite tooth, whether the pair of teeth compared was left-right or upper-lower. The best fit was found when comparing the size of successive replacement teeth from the front to the back of the jaw. Every replacement tooth that is 40-80% of its definitive size is followed, in the next position on the arcade, by a tooth that is, on average, 20% less developed. Considering teeth in alternate positions (even and odd series), each replacement tooth was a little more developed than the previous, more anterior, one (0.5-20% when the teeth are from 10-40% of their final size). The latter pattern showed that tooth replacement occurred in

  10. Common developmental pathways link tooth shape to regeneration

    PubMed Central

    Fraser, Gareth J.; Bloomquist, Ryan F.; Streelman, J. Todd

    2013-01-01

    In many non-mammalian vertebrates, adult dentitions result from cyclical rounds of tooth regeneration wherein simple unicuspid teeth are replaced by more complex forms. Therefore and by contrast to mammalian models, the numerical majority of vertebrate teeth develop shape during the process of replacement. Here, we exploit the dental diversity of Lake Malawi cichlid fishes to ask how vertebrates generally replace their dentition and in turn how this process acts to influence resulting tooth morphologies. First, we used immunohistochemistry to chart organogenesis of continually replacing cichlid teeth and discovered an epithelial down-growth that initiates the replacement cycle via a labial proliferation bias. Next, we identified sets of co-expressed genes from common pathways active during de novo, lifelong tooth replacement and tooth morphogenesis. Of note, we found two distinct epithelial cell populations, expressing markers of dental competence and cell potency, which may be responsible for tooth regeneration. Related gene sets were simultaneously active in putative signaling centers associated with the differentiation of replacement teeth with complex shapes. Finally, we manipulated targeted pathways (BMP, FGF, Hh, Notch, Wnt/β-catenin) in vivo with small molecules and demonstrated dose-dependent effects on both tooth replacement and tooth shape. Our data suggest that the processes of tooth regeneration and tooth shape morphogenesis are integrated via a common set of molecular signals. This linkage has subsequently been lost or decoupled in mammalian dentitions where complex tooth shapes develop in first generation dentitions that lack the capacity for lifelong replacement. Our dissection of the molecular mechanics of vertebrate tooth replacement coupled to complex shape pinpoints aspects of odontogenesis that might be re-evolved in the lab to solve problems in regenerative dentistry. PMID:23422830

  11. Tooth cusp sharpness as a dietary correlate in great apes.

    PubMed

    Berthaume, Michael A

    2014-02-01

    Mammalian molars have undergone heavy scrutiny to determine correlates between morphology and diet. Here, the relationship between one aspect of occlusal morphology, tooth cusp radius of curvature (RoC), and two broad dietary categories, folivory and frugivory, is analyzed in apes. The author hypothesizes that there is a relationship between tooth cusp RoC and diet, and that folivores have sharper teeth than frugivores, and further test the correlation between tooth cusp RoC and tooth cusp size. Eight measures of tooth cusp RoC (two RoCs per cusp) were taken from 53 M(2) s from four species and subspecies of frugivorous apes (Pongo pygmaeus, Pan troglodytes troglodytes, Pan troglodytes schweinfurthii, and Gorilla gorilla gorilla) and two subspecies of folivorous apes (Gorilla beringei beringei, and Gorilla beringei graueri). Phylogenetically corrected ANOVAs were run on the full dataset and several subsets of the full dataset, revealing that, when buccolingual RoCs are taken into account, tooth cusp RoCs can successfully differentiate folivores and frugivores. PCAs revealed that folivores consistently had duller teeth than frugivores. In addition, a weak, statistically significant positive correlation exists between tooth cusp size and tooth cusp RoC. The author hypothesizes differences in tooth cusp RoC are correlated with wear rates, where, per vertical unit of wear, duller cusps will have a longer length of exposed enamel ridge than sharper cusps. More data need to be gathered to determine if the correlation between tooth cusp RoC and tooth cusp size holds true when small primates are considered.

  12. Children's Rights and Self-Actualization Theory.

    ERIC Educational Resources Information Center

    Farmer, Rod

    1982-01-01

    Educators need to seriously reflect upon the concept of children's rights. Though the idea of children's rights has been debated numerous times, the idea remains vague and shapeless; however, Maslow's theory of self-actualization can provide the children's rights idea with a needed theoretical framework. (Author)

  13. Group Counseling for Self-Actualization.

    ERIC Educational Resources Information Center

    Streich, William H.; Keeler, Douglas J.

    Self-concept, creativity, growth orientation, an integrated value system, and receptiveness to new experiences are considered to be crucial variables to the self-actualization process. A regular, year-long group counseling program was conducted with 85 randomly selected gifted secondary students in the Farmington, Connecticut Public Schools. A…

  14. Culture Studies and Self-Actualization Theory.

    ERIC Educational Resources Information Center

    Farmer, Rod

    1983-01-01

    True citizenship education is impossible unless students develop the habit of intelligently evaluating cultures. Abraham Maslow's theory of self-actualization, a theory of innate human needs and of human motivation, is a nonethnocentric tool which can be used by teachers and students to help them understand other cultures. (SR)

  15. Humanistic Education and Self-Actualization Theory.

    ERIC Educational Resources Information Center

    Farmer, Rod

    1984-01-01

    Stresses the need for theoretical justification for the development of humanistic education programs in today's schools. Explores Abraham Maslow's hierarchy of needs and theory of self-actualization. Argues that Maslow's theory may be the best available for educators concerned with educating the whole child. (JHZ)

  16. Developing Human Resources through Actualizing Human Potential

    ERIC Educational Resources Information Center

    Clarken, Rodney H.

    2012-01-01

    The key to human resource development is in actualizing individual and collective thinking, feeling and choosing potentials related to our minds, hearts and wills respectively. These capacities and faculties must be balanced and regulated according to the standards of truth, love and justice for individual, community and institutional development,…

  17. 50 CFR 253.16 - Actual cost.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Actual cost. 253.16 Section 253.16 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE AID TO FISHERIES FISHERIES ASSISTANCE PROGRAMS Fisheries Finance Program §...

  18. Retroposon analysis of major cetacean lineages: The monophyly of toothed whales and the paraphyly of river dolphins

    PubMed Central

    Nikaido, Masato; Matsuno, Fumio; Hamilton, Healy; Brownell, Robert L.; Cao, Ying; Ding, Wang; Zuoyan, Zhu; Shedlock, Andrew M.; Fordyce, R. Ewan; Hasegawa, Masami; Okada, Norihiro

    2001-01-01

    SINE (short interspersed element) insertion analysis elucidates contentious aspects in the phylogeny of toothed whales and dolphins (Odontoceti), especially river dolphins. Here, we characterize 25 informative SINEs inserted into unique genomic loci during evolution of odontocetes to construct a cladogram, and determine a total of 2.8 kb per taxon of the flanking sequences of these SINE loci to estimate divergence times among lineages. We demonstrate that: (i) Odontocetes are monophyletic; (ii) Ganges River dolphins, beaked whales, and ocean dolphins diverged (in this order) after sperm whales; (iii) three other river dolphin taxa, namely the Amazon, La Plata, and Yangtze river dolphins, form a monophyletic group with Yangtze River dolphins being the most basal; and (iv) the rapid radiation of extant cetacean lineages occurred some 28–33 million years B.P., in strong accord with the fossil record. The combination of SINE and flanking sequence analysis suggests a topology and set of divergence times for odontocete relationships, offering alternative explanations for several long-standing problems in cetacean evolution. PMID:11416211

  19. Whiteheadian Actual Entitities and String Theory

    NASA Astrophysics Data System (ADS)

    Bracken, Joseph A.

    2012-06-01

    In the philosophy of Alfred North Whitehead, the ultimate units of reality are actual entities, momentary self-constituting subjects of experience which are too small to be sensibly perceived. Their combination into "societies" with a "common element of form" produces the organisms and inanimate things of ordinary sense experience. According to the proponents of string theory, tiny vibrating strings are the ultimate constituents of physical reality which in harmonious combination yield perceptible entities at the macroscopic level of physical reality. Given that the number of Whiteheadian actual entities and of individual strings within string theory are beyond reckoning at any given moment, could they be two ways to describe the same non-verifiable foundational reality? For example, if one could establish that the "superject" or objective pattern of self- constitution of an actual entity vibrates at a specific frequency, its affinity with the individual strings of string theory would be striking. Likewise, if one were to claim that the size and complexity of Whiteheadian 'societies" require different space-time parameters for the dynamic interrelationship of constituent actual entities, would that at least partially account for the assumption of 10 or even 26 instead of just 3 dimensions within string theory? The overall conclusion of this article is that, if a suitably revised understanding of Whiteheadian metaphysics were seen as compatible with the philosophical implications of string theory, their combination into a single world view would strengthen the plausibility of both schemes taken separately. Key words: actual entities, subject/superjects, vibrating strings, structured fields of activity, multi-dimensional physical reality.

  20. Carrea’s Index and Tooth Dimensions– An Avant-Garde in Stature Estimation: An Observational Study

    PubMed Central

    Reddy, Reddy Sudhakara; Rajesh, Nallakunta; Jyothirmai, Koneru; Preethi, Madgula; Teja, Thungala Navya

    2016-01-01

    Introduction Identifying victims in case of mass disasters when only human remains are present is quite a challenging task. Although other peripheral extremities of human body are used in estimating stature, in situations where only skull is available, teeth play an important role in personal identification. The present study used Carrea’s index in stature estimation using tooth dimensions. Aim This study is intended to correlate the anterior mandibular tooth dimensions with that of real stature using Carrea’s index and also to know the applicability and validity of this index to the current study population. Materials and Methods A total of 82 subjects (both males and females) which makes 164 hemiarches (normal, crowded and diastema) were included. Actual height of each subject was measured using anthropometer and tooth measurements from each cast were recorded and analyzed using Carrea’s index. Results The results showed a strong correlation between estimated stature and real stature. Moreover, this correlation is more valid on male sample and right side of the inferior hemiarches (Normal-81.8% and 87.2%; Crowded-76.4% and 80%; Diastema-52.9% and 60% respectively). Conclusion Although a correlation between actual stature and estimated stature was established, Carrea’s index as a predictor tool may not give accurate estimations. Nevertheless, it could only act as an auxiliary tool in person identification. PMID:28209000

  1. Mechanical response of the south flank of kilauea volcano, hawaii, to intrusive events along the rift systems

    USGS Publications Warehouse

    Dvorak, J.J.; Okamura, A.T.; English, T.T.; Koyanagi, R.Y.; Nakata, J.S.; Sako, M.K.; Tanigawa, W.T.; Yamashita, K.M.

    1986-01-01

    Increased earthquake activity and compression of the south flank of Kilauea volcano, Hawaii, have been recognized by previous investigators to accompany rift intrusions. We further detail the temporal and spatial changes in earthquake rates and ground strain along the south flank induced by six major rift intrusions which occurred between December 1971 and January 1981. The seismic response of the south flank to individual rift intrusions is immediate; the increased rate of earthquake activity lasts from 1 to 4 weeks. Horizontal strain measurements indicate that compression of the south flank usually accompanies rift intrusions and eruptions. Emplacement of an intrusion at a depth greater than about 4 km, such as the June 1982 southwest rift intrusion, however, results in a slight extension of the subaerial portion of the south flank. Horizontal strain measurements along the south flank are used to locate the January 1983 east-rift intrusion, which resulted in eruptive activity. The intrusion is modeled as a vertical rectangular sheet with constant displacement perpendicular to the plane of the sheet. This model suggests that the intrusive body that compressed the south flank in January 1983 extended from the surface to about 2.4 km depth, and was aligned along a strike of N66??E. The intrusion is approximately 11 km in length, extended beyond the January 1983 eruptive fissures, which are 8 km in length and is contained within the 14-km-long region of shallow rift earthquakes. ?? 1986.

  2. Tooth staining effects of an alexidine mouthwash.

    PubMed

    Formicola, A J; Deasy, M J; Johnson, D H; Howe, E E

    1979-04-01

    The primary purpose of this study was to determine the amount of tooth staining produced by an alexidine mouthrinse. One hundred and eighty subjects rinsed twice daily for 1 month with either 15 ml of alexidine (0.035%) or a placebo solution. Prior to the study, the subjects were classified according to their smoking, coffee and tea drinking habits and these factors were subsequently considered in the analysis of the stain scores. Additionally, the effects on staining of a prior prophylaxis and the use of a fluoridated toothpaste during the study were determined. Upon termination of the study, subjects utilizing the active mouthrinse manifested a greater degree of staining than placebo users. The amount and intensity of the stain due to alexidine were not influenced (increased) by smoking, tea or coffee drinking habits. A prior prophylaxis did not reduce the staining propensity of alexidine users. The method of scoring developed can be used to assess the degree of tooth staining induced by antiplaque agents.

  3. Inadvertent tooth movement with fixed lingual retainers.

    PubMed

    Shaughnessy, Timothy G; Proffit, William R; Samara, Said A

    2016-02-01

    Fixed retainers are effective in maintaining the alignment of the anterior teeth more than 90% of the time, but they can produce inadvertent tooth movement that in the most severe instances requires orthodontic retreatment managed with a periodontist. This is different from relapse into crowding when a fixed retainer is lost. These problems arise when the retainer breaks but remains bonded to some or all teeth, or when an intact retainer is distorted by function or was not passive when bonded. In both instances, torque of the affected teeth is the predominant outcome. A fixed retainer made with dead soft wire is the least likely to create torque problems but is the most likely to break. Highly flexible twist wires bonded to all the teeth appear to be the most likely to produce inadvertent tooth movement, but this also can occur with stiffer wires bonded only to the canines. Orthodontists, general dentists, and patients should be aware of possible problems with fixed retainers, especially those with all teeth bonded, because the patient might not notice partial debonding. Regular observations of patients wearing fixed retainers by orthodontists in the short term and family dentists in the long term are needed.

  4. Analyses of Etna Eruptive Activity From 18th Century and Characterization of Flank Eruptions

    NASA Astrophysics Data System (ADS)

    del Carlo, P.; Branca, S.; Coltelli, M.

    2003-12-01

    Etna explosive activity has usually been considered subordinate with respect to the effusive eruptions. Nevertheless, in the last decade and overall after the 2001 and 2002 flank eruptions, explosive activity has drawn the attention of the scientific and politic communities owing to the damages that the long-lasting ash fall caused to Sicily's economy. We analyzed the eruptions from the 18th century to find some analogous behavior of Etna in the past. A study of the Etna historical record (Branca and Del Carlo, 2003) evidenced that after the 1727 eruption, there are no more errors in the attribution of the year of the eruption. Furthermore from this time on, the scientific quality of the chronicles allowed us to obtain volcanological information and to estimate the magnitude of the major explosive events. The main goal of this work was to characterize the different typologies of Etna eruptions in the last three centuries. Meanwhile, we have tried to find the possible relationship between the two kinds of activity (explosive and effusive) in order to understand the complexity of the eruptive phenomena and define the short-term behavior of Etna. On the base of the predominance of the eruptive typology (effusive or explosive) we have classified the flank eruptions in three classes: i) Type 1: almost purely effusive; ii) Type 2: the intensity of explosive activity comparable with the effusive; iii) Type 3: almost purely explosive with minor lava effusion (only the 1763 La Montagnola and 2002 eruptions belong to this class). Long-lasting explosive activity is produced by flank eruptions with continuous ash emission and prolonged fallout on the flanks (e.g. 1763, 1811, 1852-53, 1886, 1892, 2001 and 2002 eruptions). At summit craters continuous activity is weaker, whereas the strongest explosive eruptions are short-lived events. Furthermore, from the 18th to 20th century there were several years of intense and discontinuous summit explosive activity, from high strombolian

  5. Transmembrane Helix Association Affinity Can Be Modulated by Flanking and Noninterfacial Residues

    PubMed Central

    Zhang, Jinming; Lazaridis, Themis

    2009-01-01

    The GxxxG sequence motif mediates the association of transmembrane (TM) helices by providing a site of close contact between them. However, it is not sufficient for strong association. For example, both bacteriophage M13 major coat protein (MCP) and human erythrocyte protein glycophorin A (GpA) contain a GxxxG motif in their TM domains and form a homodimer, but the association affinity of MCP, measured by the ToxCAT in vivo assay, is dramatically weaker than that of GpA. Even when all interfacial residues of MCP were substituted for those of GpA (MCP-GpA), association remained significantly weaker than in GpA. Here we provide an explanation for these experimental observations using molecular dynamics simulations in an implicit membrane (IMM1-GC). The association free energies of GpA29 (GpA with 29 residues all from the wild-type sequence), GpA15p11 (GpA with 15 residues from the wild-type sequence plus 11 flanking residues from the ToxCAT construct), MCP, and MCP-GpA TM helices were calculated and compared. MCP and MCP-GpA have the same flanking residues used in the ToxCAT assay as those in GpA15p11, but the position of the flanking residues relative to the GxxxG motif is different. The calculated association free energies follow experimental observations: the association affinity of MCP-GpA falls between those of GpA15p11 and MCP wild-type. MCP exhibits an equally strong interhelical interaction in the TM domain. A major reason for the weaker association of MCP in the calculations was the noninterfacial residue Lys-40, which in the dimer structure is forced to be buried in the membrane interior. To alleviate the desolvation cost, in MCP and MCP-GpA dimers, Lys-40 gets deprotonated. A second factor that modulates association affinity is the flanking residues. Thanks to them, GpA15p11 exhibits a much stronger association affinity than GpA29. The positioning of the flanking residues is also important, as evidenced by the difference in association affinity between

  6. Peroxide dental bleaching via laser microchannels and tooth color measurements

    NASA Astrophysics Data System (ADS)

    Altshuler, Gregory; Belikov, Andrey; Skrypnik, Alexei; Feldchtein, Felix; Pushkareva, Alexandra; Shatilova, Ksenia; Cernavin, Igor; Tuchin, Valery

    2016-12-01

    The aim of this study was to use microchannels drilled by an Er:YAG laser into a human tooth through the enamel into the dentin for direct injection of hydrogen peroxide (HP) to produce a minimally invasive, rapid, tooth bleaching effect. The experiments were conducted in vitro. Five microchannels with a diameter of ˜200 μm and a depth of ˜2 mm were drilled through the palatal side of a human tooth crown using the microbeam of an Er:YAG-laser with a wavelength of 2.94 μm. After injection of an aqueous solution of 31%-HP through the microchannels, the tooth color was evaluated using a VITA shade guide and International Commission on Illumination L*ab color parameters. A tooth model used for the evaluation of the distribution of HP concentration was created and the amount of HP which can be injected into tooth dentin to bleach it safely was estimated. Injection of 1.5±0.1 mm3 of 31%-HP into the tooth led to noticeable bleaching within 3 h and significant improvement of tooth color within 24 h.

  7. 3D Simulation Modeling of the Tooth Wear Process.

    PubMed

    Dai, Ning; Hu, Jian; Liu, Hao

    2015-01-01

    Severe tooth wear is the most common non-caries dental disease, and it can seriously affect oral health. Studying the tooth wear process is time-consuming and difficult, and technological tools are frequently lacking. This paper presents a novel method of digital simulation modeling that represents a new way to study tooth wear. First, a feature extraction algorithm is used to obtain anatomical feature points of the tooth without attrition. Second, after the alignment of non-attrition areas, the initial homogeneous surface is generated by means of the RBF (Radial Basic Function) implicit surface and then deformed to the final homogeneous by the contraction and bounding algorithm. Finally, the method of bilinear interpolation based on Laplacian coordinates between tooth with attrition and without attrition is used to inversely reconstruct the sequence of changes of the 3D tooth morphology during gradual tooth wear process. This method can also be used to generate a process simulation of nonlinear tooth wear by means of fitting an attrition curve to the statistical data of attrition index in a certain region. The effectiveness and efficiency of the attrition simulation algorithm are verified through experimental simulation.

  8. [Tooth decay and its complication prognosis in smokers].

    PubMed

    Orekhova, L Iu; Osipova, M V

    2014-01-01

    The study focuses on complicated and non-complicated tooth decay course and prognosis in smokers. Oral status, prevention and treatment effectiveness was assessed in 330 non-smokers and 345 smoking patients. The results allowed concluding with guidelines for tooth decay prevention and treatment in smokers.

  9. 3D Simulation Modeling of the Tooth Wear Process

    PubMed Central

    Dai, Ning; Hu, Jian; Liu, Hao

    2015-01-01

    Severe tooth wear is the most common non-caries dental disease, and it can seriously affect oral health. Studying the tooth wear process is time-consuming and difficult, and technological tools are frequently lacking. This paper presents a novel method of digital simulation modeling that represents a new way to study tooth wear. First, a feature extraction algorithm is used to obtain anatomical feature points of the tooth without attrition. Second, after the alignment of non-attrition areas, the initial homogeneous surface is generated by means of the RBF (Radial Basic Function) implicit surface and then deformed to the final homogeneous by the contraction and bounding algorithm. Finally, the method of bilinear interpolation based on Laplacian coordinates between tooth with attrition and without attrition is used to inversely reconstruct the sequence of changes of the 3D tooth morphology during gradual tooth wear process. This method can also be used to generate a process simulation of nonlinear tooth wear by means of fitting an attrition curve to the statistical data of attrition index in a certain region. The effectiveness and efficiency of the attrition simulation algorithm are verified through experimental simulation. PMID:26241942

  10. Distribution pattern of cholinesterase enzymes in human tooth germs.

    PubMed

    Nandasena, T L; Jayawardena, C K; Tilakaratne, W M; Nanayakkara, C D

    2010-08-01

    The two distinct molecular forms of cholinesterase (ChE) are acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE). Our previous studies have reported that ChE is involved in tooth development. However, further experiments are needed to understand the precise action of ChE in tooth development. This study aimed to localise types of ChE in human tooth germs, and identify their distribution pattern. ChE were localised in frozen sections of jaws which were prepared from dead fetuses, neonates and stillborns who were free from visible abnormalities by Karnovsky and Root method. AChE was identified in the inner and outer enamel epithelia including the cervical loop region, stratum intermedium and preameloblasts of tooth germs at bell stage. Secretory ameloblasts were free from staining. The bud and cap stages of permanent tooth germs showed AChE activity on the lingual aspect and top surface of the epithelial ingrowths, respectively. BuChE activity was localised in the degenerating dental lamina. Our study reported the first evidence of localisation of ChE in human tooth development and identified the possible molecular form of ChE in tooth germs as AChE. Also, our results have provided strong evidence to speculate the action of AChE is on the cells of enamel organ during tooth development.

  11. Crowned spur gears - Methods for generation and tooth contact analysis. I - Basic concepts, generation of the pinion tooth surface by a plane

    NASA Technical Reports Server (NTRS)

    Litvin, F. L.; Handschuh, R. F.; Zhang, J.

    1988-01-01

    A topology of crowned spur pinion tooth surface that reduces the level of transmission errors due to misalignment is proposed. The geometry of the deviated pinion tooth surface and regular gear tooth surface, along with tooth contact analysis is discussed. Generation of the deviated pinion tooth surface by a plane whose motion is controlled by a five-degree-of-freedom system is proposed. Numerical results are included and indicate that transmission errors remain low as the gears are misaligned.

  12. An Analysis of the Symptomatic Domains Most Relevant to Charcot Marie Tooth Neuropathy (CMT) Patients

    ClinicalTrials.gov

    2015-04-28

    Charcot Marie Tooth Disease (CMT); Hereditary Sensory and Motor Neuropathy; Nerve Compression Syndromes; Tooth Diseases; Congenital Abnormalities; Genetic Diseases, Inborn; Heredodegenerative Disorders, Nervous System

  13. Single-Tooth Modeling for 3D Dental Model

    PubMed Central

    Yuan, Tianran; Liao, Wenhe; Dai, Ning; Cheng, Xiaosheng; Yu, Qing

    2010-01-01

    An integrated single-tooth modeling scheme is proposed for the 3D dental model acquired by optical digitizers. The cores of the modeling scheme are fusion regions extraction, single tooth shape restoration, and single tooth separation. According to the “valley” shape-like characters of the fusion regions between two adjoining teeth, the regions of the 3D dental model are analyzed and classified based on the minimum curvatures of the surface. The single tooth shape is restored according to the bioinformation along the hole boundary, which is generated after the fusion region being removed. By using the extracted boundary from the blending regions between the teeth and soft tissues as reference, the teeth can be separated from the 3D dental model one by one correctly. Experimental results show that the proposed method can achieve satisfying modeling results with high-degree approximation of the real tooth and meet the requirements of clinical oral medicine. PMID:20689718

  14. Interaction between attrition,abrasion and erosion in tooth wear.

    PubMed

    Addy, M; Shellis, R P

    2006-01-01

    Tooth wear is the result of three processes: abrasion (wear produced by interaction between teeth and other materials), attrition (wear through tooth-tooth contact) and erosion (dissolution of hard tissue by acidic substances). A further process (abfraction) might potentiate wear by abrasion and/or erosion. Both clinical and experimental observations show that individual wear mechanisms rarely act alone but interact with each other. The most important interaction is the potentiation of abrasion by erosive damage to the dental hard tissues. This interaction seems to be the major factor in occlusal and cervical wear. The available evidence seems insufficient to establish whether abfraction is an important contributor to tooth wear in vivo. Saliva can modulate erosive/abrasive tooth wear through formation of pellicle and by remineralisation but cannot prevent it.

  15. pH Response and Tooth Surface Solubility at the Tooth/Bacteria Interface.

    PubMed

    Mayanagi, Gen; Igarashi, Koei; Washio, Jumpei; Takahashi, Nobuhiro

    2017-02-02

    Evaluating the physiochemical processes at the tooth surface/bacteria interface is important for elucidating the etiology of dental caries. This study aimed to compare the mineral solubility and protein degradation of coronal enamel (CE) and root dentin (RD), and investigate the involvement of dissolved components in bacteria-induced pH changes using a model of tooth/bacteria interface. An experimental apparatus forming a well was made of polymethyl methacrylate, and a bovine tooth (CE or RD) specimen was fixed at the bottom of the well. A miniature pH electrode was placed on the tooth, and Streptococcus mutans NCTC 10449 cells, grown in 0.5% glucose-containing complex medium, were packed into the well. The pH at the tooth/S. mutans interface was monitored continuously for 120 min after the addition of 0.5% glucose at 37°C. S. mutans cells were recovered from the wells, and the amounts of lactate and calcium were measured using a portable lactate meter and a fluorescent dye, respectively. Proteolytic activity was also evaluated fluorometrically. The pH of the RD/S. mutans interface was significantly higher than that of the CE/S. mutans interface (30 min: 6.37 ± 0.12 vs. 6.18 ± 0.11, 60 min: 6.08 ± 0.14 vs. 5.66 ± 0.27, 90 min: 5.49 ± 0.24 vs. 5.14 ± 0.22, p < 0.05). Greater amounts of calcium were dissolved from RD (3.19 ± 0.74 µg/mL) than from CE (1.84 ± 0.68 µg/mL; p < 0.05), while similar amounts of lactate were produced. Proteolytic activity was not detected at any of the interfaces. These results indicate that RD is more soluble to bacteria-induced acidification than CE. This method can contribute to the evaluation and development of caries-preventive materials.

  16. The Prevalence of Tooth Wear in the Dutch Adult Population

    PubMed Central

    Wetselaar, Peter; Vermaire, Jan H.; Visscher, Corine M.; Lobbezoo, Frank; Schuller, Annemarie A.

    2016-01-01

    This study aimed to assess the prevalence of tooth wear in different age groups of the Dutch adult population and to determine this tooth wear distribution by gender, socioeconomic class, and type of teeth. Results were compared with the outcomes of a previous study in a comparable population. As part of a comprehensive investigation of the oral health of the general Dutch adult population in 2013, tooth wear was assessed among 1,125 subjects in the city of ‘s-Hertogenbosch. The data collected were subjected to stratified analysis by 5 age groups (25-34, 35-44, 45-54, 55-64, and 65-74 years), gender, socioeconomic class, and type of teeth. Tooth wear was assessed using a 5-point ordinal occlusal/incisal grading scale. The number of teeth affected was higher in older age groups. Men showed more tooth wear than women, and subjects with low socioeconomic status (low SES) showed on average higher scores than those with high SES. Tooth wear prevalence found in this study was higher in all age groups than in the previous study. The present study found prevalences of 13% for mild tooth wear and 80% for moderate tooth wear, leading to the conclusion that these are common conditions in the Dutch adult population. Severe tooth wear (prevalence 6%) may however be characterized as rare. A tendency was found for there to be more tooth wear in older age groups, in men as compared with women, in persons with lower SES, and in the present survey as compared with the previous one. PMID:27694757

  17. The Actual Apollo 13 Prime Crew

    NASA Technical Reports Server (NTRS)

    1970-01-01

    The actual Apollo 13 lunar landing mission prime crew from left to right are: Commander, James A. Lovell Jr., Command Module pilot, John L. Swigert Jr.and Lunar Module pilot, Fred W. Haise Jr. The original Command Module pilot for this mission was Thomas 'Ken' Mattingly Jr. but due to exposure to German measles he was replaced by his backup, Command Module pilot, John L. 'Jack' Swigert Jr.

  18. Exogenous fibroblast growth factor 8 rescues development of mouse diastemal vestigial tooth ex vivo.

    PubMed

    Li, Lu; Yuan, Guohua; Liu, Chao; Zhang, Lu; Zhang, Yanding; Chen, YiPing; Chen, Zhi

    2011-06-01

    Regression of vestigial tooth buds results in the formation of the toothless diastema, a unique feature of the mouse dentition. Revitalization of the diastemal vestigial tooth bud provides an excellent model for studying tooth regeneration and replacement. It has been previously shown that suppression of fibroblast growth factor (FGF) signaling in the diastema results in vestigial tooth bud regression. In this study, we report that application of exogenous FGF8 to the mouse embryonic diastemal region rescues diastemal tooth development. However, this rescue of diastemal tooth development occurs only in an isolated diastemal regions and not in the mandibular quadrant, which includes the incisor and molar germs. FGF8 promotes cell proliferation and inhibits apoptosis in diastemal tooth epithelium, and revitalizes the tooth developmental program, as evidenced by the expression of genes critical for normal tooth development. Our results also support the idea that the adjacent tooth germs contribute to the suppression of diastemal vestigial tooth buds by means of multiple signals.

  19. Possible Evidences of Ice Dynamics in the Putative Glaciers at the Lower NW Flank of Hecates Tholus Volcano, Mars

    NASA Astrophysics Data System (ADS)

    Centeno, J. D.; de Pablo, M. A.

    2011-03-01

    Glacial forms, like crevasses and bergschrunds give evidence of recent glacial flow in the northwest flank of Hecates Tholus. We show several working hypothesis on the origin of these forms and its relation with slope gravitational processes and deglaciation.

  20. Modeling "secular" flank motion at Kilauea Volcano (Hawai'i) during 2000-2003

    NASA Astrophysics Data System (ADS)

    Plattner, C.; Amelung, F.; Baker, S.; Govers, R. M.; Poland, M. P.; Lavallee, Y.

    2011-12-01

    Kilauea's south flank is moving seaward due to flank instabilities. The rate is influenced by magmatic events (dike intrusions) and tectonic events (earthquakes and slow-slip events at the decollement), but the general flank motion signal remains significant at any time, with rates of 6-10 cm/yr during the past decade. The surface displacements were explained by fault slip along the decollement beneath Kilauea combined with deep-rift opening in elastic halfspace dislocation models. While these models explain the kinematics well, the dynamics of the rift opening are not resolved, and the question on contribution from magmatic driving forces versus an entirely gravitationally-driven system remains. InSAR time-series analysis (Small Baseline Algorithm; SBAS) showed linear surface subsidence at Kilauea summit (maximum rate 5.5 cm/yr south of the caldera) during 2000-2003, a time-period during which the influence of distinct deformation events is small in comparison to previous and later time-periods. Here, we investigate if summit subsidence can be explained as a consequence of secular flank motion at Kilauea by ductile creep of a deep magma mush, using a numerical model with time-dependent material deformation properties to constrain velocities rather than displacements. We developed a 2D finite element model that investigates the deformation response of Kilauea to gravitational driving forces only. The model geometry includes a decollement fault beneath the volcano that can have locked and creeping fault segments. We introduce time-dependent material behavior using a viscoelastic model media. The host rock remains stable over geodetic timescales given its high viscosity value, while the deep-seated magma mush beneath Kilauea caldera is assigned a lower viscosity and spreads at significant rates. The deformation signal of the magma mush is transmitted to the surface, causing local subsidence at Kilauea summit, showing that summit subsidence can be explained by flank

  1. Equine odontoclastic tooth resorption and hypercementosis.

    PubMed

    Staszyk, Carsten; Bienert, Astrid; Kreutzer, Robert; Wohlsein, Peter; Simhofer, Hubert

    2008-12-01

    A poorly described, painful disorder of incisor and canine teeth, variably causing periodontitis, with resorptive or proliferative changes of the calcified dental tissues, has recently been documented in aged horses. No plausible aetiopathogenesis for this syndrome has been recorded. Eighteen diseased teeth from eight horses were examined grossly and microscopically and showed the presence of odontoclastic cells by tartrate resistant acid phosphatase (TRAP) staining. A chronological sequence of odontoclastic resorption followed by hypercementosis was demonstrated and, consequently, the term equine odontoclastic tooth resorption and hypercementosis (EOTRH) is proposed for this disorder. EOTRH shares many features with similar dental syndromes described in humans and cats. An aetiological hypothesis proposes mechanical stress of the periodontal ligament as the initiating factor.

  2. Diagnosis of Charcot-Marie-Tooth Disease

    PubMed Central

    Banchs, Isabel; Casasnovas, Carlos; Albertí, Antonia; De Jorge, Laura; Povedano, Mónica; Montero, Jordi; Martínez-Matos, Juan Antonio; Volpini, Victor

    2009-01-01

    Charcot-Marie-Tooth (CMT) disease or hereditary motor and sensory neuropathy (HMSN) is a genetically heterogeneous group of conditions that affect the peripheral nervous system. The disease is characterized by degeneration or abnormal development of peripheral nerves and exhibits a range of patterns of genetic transmission. In the majority of cases, CMT first appears in infancy, and its manifestations include clumsiness of gait, predominantly distal muscular atrophy of the limbs, and deformity of the feet in the form of foot drop. It can be classified according to the pattern of transmission (autosomal dominant, autosomal recessive, or X linked), according to electrophysiological findings (demyelinating or axonal), or according to the causative mutant gene. The classification of CMT is complex and undergoes constant revision as new genes and mutations are discovered. In this paper, we review the most efficient diagnostic algorithms for the molecular diagnosis of CMT, which are based on clinical and electrophysiological data. PMID:19826499

  3. Tooth loss and obstructive sleep apnoea

    PubMed Central

    Bucca, Caterina; Cicolin, Alessandro; Brussino, Luisa; Arienti, Andrea; Graziano, Alessandra; Erovigni, Francesco; Pera, Paolo; Gai, Valerio; Mutani, Roberto; Preti, Giulio; Rolla, Giovanni; Carossa, Stefano

    2006-01-01

    Background Complete tooth loss (edentulism) produces anatomical changes that may impair upper airway size and function. The aim of this study was to evaluate whether edentulism favours the occurrence of obstructive sleep apnoea (OSA). Methods Polysomnography was performed in 48 edentulous subjects on two consecutive nights, one slept with and the other without dentures. Upper airway size was assessed by cephalometry and by recording forced mid-inspiratory airflow rate (FIF50). Exhaled nitric oxide (eNO) and oral NO (oNO), were measured as markers of airway and oropharyngeal inflammation. Results The apnoea/hypopnoea index (AHI) without dentures was significantly higher than with dentures (17·4 ± 3·6 versus 11·0 ± 2·3. p = 0·002), and was inversely related to FIF50 (p = 0·017) and directly related to eNO (p = 0·042). Sleeping with dentures, 23 subjects (48%) had an AHI over 5, consistent with OSA, but sleeping without dentures the number of subjects with abnormal AHI rose to 34 (71%). At cephalometry, removing dentures produced a significant decrease in retropharyngeal space (from 1·522 ± 0·33 cm to 1·27 ± 0·42 cm, p = 0·006). Both morning eNO and oNO were higher after the night slept without dentures (eNO 46·1 ± 8·2 ppb versus 33·7 ± 6·3 ppb, p = 0·035, oNO 84·6 ± 13·7 ppb versus 59·2 ± 17·4 ppb, p = 0·001). Conclusion These findings suggest that complete tooth loss favours upper airway obstruction during sleep. This untoward effect seems to be due to decrease in retropharyngeal space and is associated with increased oral and exhaled NO concentration. PMID:16417639

  4. Tooth Size Variation in Pinniped Dentitions.

    PubMed

    Wolsan, Mieczyslaw; Suzuki, Satoshi; Asahara, Masakazu; Motokawa, Masaharu

    2015-01-01

    It is contentious whether size variation among mammalian teeth is heterogeneous or homogeneous, whether the coefficient of variation is reliable, and whether the standard deviation of log-transformed data and the residual of standard deviation on mean variable size are useful replacements for the coefficient of variation. Most studies of tooth size variation have been on mammals with complex-crowned teeth, with relatively little attention paid to taxa with simple-crowned teeth, such as Pinnipedia. To fill this gap in knowledge and to resolve the existing controversies, we explored the variation of linear size variables (length and width) for all teeth from complete permanent dentitions of four pinniped species, two phocids (Histriophoca fasciata, Phoca largha) and two otariids (Callorhinus ursinus, Eumetopias jubatus). Size variation among these teeth was mostly heterogeneous both along the toothrow and among species. The incisors, canines, and mesial and distal postcanines were often relatively highly variable. The levels of overall dental size variation ranged from relatively low as in land carnivorans (Phoca largha and both otariids) to high (Histriophoca fasciata). Sexual size dimorphism varied among teeth and among species, with teeth being, on average, larger in males than in females. This dimorphism was more pronounced, and the canines were larger and more dimorphic relative to other teeth in the otariids than in the phocids. The coefficient of variation quantified variation reliably in most cases. The standard deviation of log-transformed data was redundant with the coefficient of variation. The residual of standard deviation on mean variable size was inaccurate when size variation was considerably heterogeneous among the compared variables, and was incomparable between species and between sexes. The existing hypotheses invoking developmental fields, occlusal complexity, and the relative timing of tooth formation and sexually dimorphic hormonal activity do

  5. Industrial Noise and Tooth Wear - Experimental Study

    PubMed Central

    Cavacas, Maria Alzira; Tavares, Vitor; Borrecho, Gonçalo; Oliveira, Maria João; Oliveira, Pedro; Brito, José; Águas, Artur; dos Santos, José Martins

    2015-01-01

    Tooth wear is a complex multifactorial process that involves the loss of hard dental tissue. Parafunctional habits have been mentioned as a self-destructive process caused by stress, which results in hyperactivity of masticatory muscles. Stress manifests itself through teeth grinding, leading to progressive teeth wear. The effects of continuous exposure to industrial noise, a “stressor” agent, cannot be ignored and its effects on the teeth must be evaluated. Aims: The aim of this study was to ascertain the effects of industrial noise on dental wear over time, by identifying and quantifying crown area loss. Material and Methods: 39 Wistar rats were used. Thirty rats were divided in 3 experimental groups of 10 animals each. Animals were exposed to industrial noise, rich in LFN components, for 1, 4 and 7 months, with an average weekly exposure of 40 hours (8h/day, 5 days/week with the weekends in silence). The remaining 9 animals were kept in silence. The areas of the three main cusps of the molars were measured under light microscopy. Statistical analysis used: A two-way ANOVA model was applied at significance level of 5%. Results: The average area of the molar cusps was significantly different between exposed and non-exposed animals. The most remarkable differences occurred between month 1 and 4. The total crown loss from month 1 to month 7 was 17.3% in the control group, and 46.5% in the exposed group, and the differences between these variations were significant (p<0.001). Conclusions: Our data suggest that industrial noise is an important factor in the pathogenesis of tooth wear. PMID:25798052

  6. Tooth Size Variation in Pinniped Dentitions

    PubMed Central

    Wolsan, Mieczyslaw; Suzuki, Satoshi; Asahara, Masakazu; Motokawa, Masaharu

    2015-01-01

    It is contentious whether size variation among mammalian teeth is heterogeneous or homogeneous, whether the coefficient of variation is reliable, and whether the standard deviation of log-transformed data and the residual of standard deviation on mean variable size are useful replacements for the coefficient of variation. Most studies of tooth size variation have been on mammals with complex-crowned teeth, with relatively little attention paid to taxa with simple-crowned teeth, such as Pinnipedia. To fill this gap in knowledge and to resolve the existing controversies, we explored the variation of linear size variables (length and width) for all teeth from complete permanent dentitions of four pinniped species, two phocids (Histriophoca fasciata, Phoca largha) and two otariids (Callorhinus ursinus, Eumetopias jubatus). Size variation among these teeth was mostly heterogeneous both along the toothrow and among species. The incisors, canines, and mesial and distal postcanines were often relatively highly variable. The levels of overall dental size variation ranged from relatively low as in land carnivorans (Phoca largha and both otariids) to high (Histriophoca fasciata). Sexual size dimorphism varied among teeth and among species, with teeth being, on average, larger in males than in females. This dimorphism was more pronounced, and the canines were larger and more dimorphic relative to other teeth in the otariids than in the phocids. The coefficient of variation quantified variation reliably in most cases. The standard deviation of log-transformed data was redundant with the coefficient of variation. The residual of standard deviation on mean variable size was inaccurate when size variation was considerably heterogeneous among the compared variables, and was incomparable between species and between sexes. The existing hypotheses invoking developmental fields, occlusal complexity, and the relative timing of tooth formation and sexually dimorphic hormonal activity do

  7. Role of large flank-collapse events on magma evolution of volcanoes. Insights from the Lesser Antilles Arc

    NASA Astrophysics Data System (ADS)

    Boudon, Georges; Villemant, Benoît; Friant, Anne Le; Paterne, Martine; Cortijo, Elsa

    2013-08-01

    Flank-collapse events are now recognized as common processes of destruction of volcanoes. They may occur several times on a volcanic edifice pulling out varying volumes of material from km3 to thousands of km3. In the Lesser Antilles Arc, a large number of flank-collapse events were identified. Here, we show that some of the largest events are correlated to significant variations in erupted magma compositions and eruptive styles. On Montagne Pelée (Martinique), magma production rate has been sustained during several thousand years following a 32 ka old flank-collapse event. Basic and dense magmas were emitted through open-vent eruptions that generated abundant scoria flows while significantly more acidic magmas were produced before the flank collapse. The rapid building of a new cone increased the load on magma bodies at depth and the density threshold. Magma production rate decreased and composition of the erupted products changed to more acidic compared to the preceding period of activity. These low density magma generated plinian and dome-forming eruptions up to the Present. In contrast at Soufrière Volcanic Centre of St. Lucia and at Pitons du Carbet in Martinique, the flank-collapses have an opposite effect: in both cases, the acidic magmas erupted immediately after the flank-collapses. These magmas are highly porphyritic (up to 60% phenocrysts) and much more viscous than the magmas erupted before the flank-collapses. They have been generally emplaced as voluminous and uptight lava domes (called “the Pitons”). Such magmas could not ascent without a significant decrease of the threshold effect produced by the volcanic edifice loading before the flank-collapse.

  8. Large-scale flank collapse events during the activity of Montagne Pelée, Martinique, Lesser Antilles

    NASA Astrophysics Data System (ADS)

    Le Friant, Anne; Boudon, Georges; Deplus, Christine; Villemant, Benoã®T.

    2003-01-01

    A horseshoe-shaped structure already identified on the southwestern flank of Montagne Pelée (Martinique, Lesser Antilles arc) was previously interpreted as resulting of a flank collapse event, but no debris avalanche deposits were observed at the time. New offshore high-resolution bathymetry and geophysical data (Aguadomar cruise; December 1998 to January 1999; R/V L'Atalante) lead us to identify three debris avalanche deposits on the submarine western flank of Montagne Pelée extending down to the Grenada Basin. They display morphological fronts and hummocky morphology on bathymetric data, speckled pattern on backscatter data and hyperbolic facies on 3.5 kHz and seismic profiles. New on-land geological studies lead us to identify two other horseshoe-shaped structures on the same flank of the volcano. The three submarine deposits have been traced back to the structures identified on land, which confirms the occurrence of repeated flank collapse events during the evolution of Montagne Pelée. The ages of the last two events are estimated at ˜9 ka and ˜25 ka on the basis of 14C and 238U/230Th dates. Every flank collapse produced debris avalanches which flowed down to the Caribbean Sea. We propose that the repeated instabilities are due to the large asymmetry of the island with western aerial and submarine slopes steeper than the eastern slopes. The asymmetry results from progressive loading by accumulation of volcanic products on the western slopes of the volcano and development of long-term gravitational instabilities. Meteoric and hydrothermal fluid circulation on the floor of the second flank collapse structure also creates a weakened hydrothermalized area, which favors the recurrence of flank collapses.

  9. Generation, migration, and entrapment of Precambrian oils in the Eastern Flank Heavy Oil province, south Oman

    SciTech Connect

    Konert, G.; Van Den Brink, H.A. ); Visser, W. )

    1991-08-01

    The prolific Eastern Flank Heavy Oil province east of the South Oman Salt basin is unique because of the widespread occurrence of Precambrian source rocks from which the hydrocarbons originated. Fission-track analysis and burial studies suggest that most of these source rocks became mature and generated hydrocarbons in the Ordovician; subsequently, the source beds were uplifted and did not re-enter the oil window. Its uniqueness is also based on the all-important role played by Precambrian salt. The traps in Palaeozoic clastics were initially structured by halokinesis, and subsequently by salt dissolution. The latter process gradually removed the salt from the area is largely responsible for the present-day structure with palaeo-withdrawal basins inverted in present-day turtles. Present-day traps are mainly post-Late Jurassic in age, significantly post-dating the time of oil generation. Detailed field studies indicate that charge phases appear to correlate with periods of increased salt dissolution in the Late Jurassic-Early Cretaceous, Late Cretaceous, and Tertiary. Oil was probably stored in intermediate traps below and within the salt. It was gradually released upon progressive tilting of the basin flank; it migrated updip toward the basinward retreating salt edge, and subsequently (back) spilled into the stratigraphically younger traps. Also, removal of the top seal of intra-salt and sub-salt traps by salt dissolution allowed upward remigration. It follows that charge concepts in the Eastern Flank Heavy Oil province depend on defining salt-edge-related hydrocarbon release areas, rather than on kitchen modeling.

  10. Radiometric dating of three large volume flank collapses in the Lesser Antilles Arc

    NASA Astrophysics Data System (ADS)

    Samper, A.; Quidelleur, X.; Boudon, G.; Le Friant, A.; Komorowski, J. C.

    2008-10-01

    It is now recognised that flank collapses are a recurrent process in the evolution of the Lesser Antilles Arc volcanoes. Large magnitude debris-avalanche deposits have been identified off the coast of Dominica, Martinique and St. Lucia, with associated volumes up to 20 km 3 [Deplus, C., Le Friant, A., Boudon, G., Komorowski, J.-C., Villemant, B., Harford, C., Ségoufin, J., Cheminée, J.-L., 2001. Submarine evidence for large-scale debris avalanches in the Lesser Antilles Arc. Earth Planet. Sci. Lett., 192: 145-157.]. We present new radiometric dating of three major events using the K-Ar Cassignol-Gillot technique. In the Qualibou depression of St. Lucia, a collapse has been constrained by dome emplacement prior to 95 ± 2 ka. In Dominica, where repetitive flank collapse events have occurred [Le Friant, A., Boudon, G., Komorowski, J.-C., Deplus, C., 2002. L'île de la Dominique, à l'origine des avalanches de débris les plus volumineuses de l'arc des Petites Antilles. C.R. Geoscience, 334: 235-243], the Plat Pays event probably occurred after 96 ± 2 ka. Inside the depression caused by this event, Scotts Head, which is interpreted as a proximal megabloc from the subsequent Soufriere avalanche event has been dated at 14 ± 1 ka, providing an older bound for this event. On Martinique three different domes within the Carbets structure dated at 337 ± 5 ka constrain the age of this high magnitude event. Finally, these results obtained from three of the most voluminous flank collapses provide constraints to estimate the recurrence of these events, which represent one of the major hazards associated with volcanoes of the Lesser Antilles Arc.

  11. Long-period seismic events with strikingly regular temporal patterns on Katla volcano's south flank (Iceland)

    NASA Astrophysics Data System (ADS)

    Sgattoni, Giulia; Jeddi, Zeinab; Gudmundsson, Ólafur; Einarsson, Páll; Tryggvason, Ari; Lund, Björn; Lucchi, Federico

    2016-09-01

    Katla is a threatening volcano in Iceland, partly covered by the Mýrdalsjökull ice cap. The volcano has a large caldera with several active geothermal areas. A peculiar cluster of long-period seismic events started on Katla's south flank in July 2011, during an unrest episode in the caldera that culminated in a glacier outburst. The seismic events were tightly clustered at shallow depth in the Gvendarfell area, 4 km south of the caldera, under a small glacier stream at the southern margin of Mýrdalsjökull. No seismic events were known to have occurred in this area before. The most striking feature of this seismic cluster is its temporal pattern, characterized by regular intervals between repeating seismic events, modulated by a seasonal variation. Remarkable is also the stability of both the time and waveform features over a long time period, around 3.5 years. We have not found any comparable examples in the literature. Both volcanic and glacial processes can produce similar waveforms and therefore have to be considered as potential seismic sources. Discerning between these two causes is critical for monitoring glacier-clad volcanoes and has been controversial at Katla. For this new seismic cluster on the south flank, we regard volcano-related processes as more likely than glacial ones for the following reasons: 1) the seismic activity started during an unrest episode involving sudden melting of the glacier and a jökulhlaup; 2) the glacier stream is small and stagnant; 3) the seismicity remains regular and stable for years; 4) there is no apparent correlation with short-term weather changes, such as rainstorms. We suggest that a small, shallow hydrothermal system was activated on Katla's south flank in 2011, either by a minor magmatic injection or by changes of permeability in a local crack system.

  12. North Kona slump: Submarine flank failure during the early(?) tholeiitic shield stage of Hualalai Volcano

    USGS Publications Warehouse

    Lipman, P.W.; Coombs, M.L.

    2006-01-01

    The North Kona slump is an elliptical region, about 20 by 60 km (1000-km2 area), of multiple, geometrically intricate benches and scarps, mostly at water depths of 2000–4500 m, on the west flank of Hualalai Volcano. Two dives up steep scarps in the slump area were made in September 2001, using the ROV Kaiko of the Japan Marine Science and Technology Center (JAMSTEC), as part of a collaborative Japan–USA project to improve understanding of the submarine flanks of Hawaiian volcanoes. Both dives, at water depths of 2700–4000 m, encountered pillow lavas draping the scarp-and-bench slopes. Intact to only slightly broken pillow lobes and cylinders that are downward elongate dominate on the steepest mid-sections of scarps, while more equant and spherical pillow shapes are common near the tops and bases of scarps and locally protrude through cover of muddy sediment on bench flats. Notably absent are subaerially erupted Hualalai lava flows, interbedded hyaloclastite pillow breccia, and/or coastal sandy sediment that might have accumulated downslope from an active coastline. The general structure of the North Kona flank is interpreted as an intricate assemblage of downdropped lenticular blocks, bounded by steeply dipping normal faults. The undisturbed pillow-lava drape indicates that slumping occurred during shield-stage tholeiitic volcanism. All analyzed samples of the pillow-lava drape are tholeiite, similar to published analyses from the submarine northwest rift zone of Hualālai. Relatively low sulfur (330–600 ppm) and water (0.18–0.47 wt.%) contents of glass rinds suggest that the eruptive sources were in shallow water, perhaps 500–1000-m depth. In contrast, saturation pressures calculated from carbon dioxide concentrations (100–190 ppm) indicate deeper equilibration, at or near sample sites at water depths of − 3900 to − 2800 m. Either vents close to the sample sites erupted mixtures of undegassed and degassed magmas, or volatiles were resorbed from

  13. Stability analysis of Hawaiian Island flanks using insight gained from strength testing of the HSDP core

    NASA Astrophysics Data System (ADS)

    Thompson, Nick; Watters, Robert J.; Schiffman, Peter

    2008-04-01

    Hawaiian Island flank failures are recognized as the largest landslide events on Earth, reaching volumes of several thousand cubic kilometers and lengths of over 200 km and occurring on an average of once every 100 000 years. The 3.1 km deep Hawaii Scientific Drilling Project (HSDP) enabled an investigation of the rock mass strength variations on the island of Hawaii [Schiffman, P., Watters, R.J., Thompson, N., Walton, A.W., 2006. Hyaloclastites and the slope stability of Hawaiian volcanoes: insights from the Hawaiian Scientific Drilling Project's 3-km drill core. Journal of Volcanology and Geothermal Research, 151 (1-3): 217-228]. This study builds on that of Schiffman et al. [Schiffman, P., Watters, R.J., Thompson, N., Walton, A.W., 2006. Hyaloclastites and the slope stability of Hawaiian volcanoes: Insights from the Hawaiian Scientific Drilling Project's 3-km drill core. Journal of Volcanology and Geothermal Research, 151 (1-3): 217-228] by considering more in-depth rock mass classification and strength testing methods of the HSDP core. Geotechnical core logging techniques combined with laboratory strength testing methods show that rock strength differences exist within the edifice. Comparing the rock strength parameters obtained from the various volcano lithologies identified weak zones, suggesting the possible location of future slip surfaces for large flank failures. Relatively weak rock layers were recognized within poorly consolidated hyaloclastite zones, with increases in strength based on degree of alteration. Subaerial and submarine basalt flows are found to be significantly stronger. With the aid of digital elevation models, cross-sections have been developed of key flank areas on the island of Hawaii. Limit equilibrium slope stability analyses are performed on each cross-section using various failure criteria for the rock mass strength calculations. Based on the stability analyses the majority of the slopes analyzed are considered stable. In cases

  14. Geochemistry of summit fumarole vapors and flanking thermal/mineral waters at Popocatepetl Volcano, Mexico

    SciTech Connect

    Werner, C.; Goff, F.; Janik, C.J.

    1997-06-01

    Popocatepetl Volcano is potentially devastating to populations living in the greater Mexico City area. Systematic monitoring of fumarole gases and flanking thermal/mineral springs began in early 1994 after increased fumarolic and seismic activity were noticed in 1991. These investigations had two major objectives: (1) to determine if changes in magmatic conditions beneath Popocatepetl might be reflected by chemical changes in fumarolic discharges and (2) to determine if thermal/mineral spring waters in the vicinity of Popocatepetl are geochemically related to or influences by the magmatic system. This report summarizes results from these two discrete studies.

  15. Augmenting CRISPR applications in Drosophila with tRNA-flanked sgRNAs.

    PubMed

    Port, Fillip; Bullock, Simon L

    2016-10-01

    We present tRNA-based vectors for producing multiple clustered regularly interspaced short palindromic repeats (CRISPR) single guide RNAs (sgRNAs) from a single RNA polymerase II or III transcript in Drosophila. The system, which is based on liberation of sgRNAs by processing flanking tRNAs, permits highly efficient multiplexing of Cas9-based mutagenesis. We also demonstrate that the tRNA-sgRNA system markedly increases the efficacy of conditional gene disruption by Cas9 and can promote editing by the recently discovered RNA-guided endonuclease Cpf1.

  16. Territory Tenure Increases with Repertoire Size in Brownish-Flanked Bush Warbler

    PubMed Central

    Xia, Canwei; Wei, Chentao; Zhang, Yanyun

    2015-01-01

    Song repertoire size is often cited as a classic example of a secondary sexual trait in birds. Models of sexual selection and empirical tests of their predictions have often related secondary sexual traits to longevity. However, the relationship between repertoire size and longevity is unclear. Using capture-mark-recapture studies in two populations of the brownish-flanked bush warbler Cettia fortipes, we found that males with a repertoire size of three maintained territory tenure for a longer duration than did males with a repertoire size of two. These results provide evidence that even a minimal difference in repertoire size can serve as a potential signal of territory tenure capability. PMID:25822524

  17. Recognition of core and flanking amino acids of MHC class II-bound peptides by the T cell receptor.

    PubMed

    Sant'Angelo, Derek B; Robinson, Eve; Janeway, Charles A; Denzin, Lisa K

    2002-09-01

    CD4 T cells recognize peptides bound to major histocompatibility complex (MHC) class II molecules. Most MHC class II molecules have four binding pockets occupied by amino acids 1, 4, 6, and 9 of the minimal peptide epitope, while the residues at positions 2, 3, 5, 7, and 8 are available to interact with the T cell receptor (TCR). In addition MHC class II bound peptides have flanking residues situated outside of this peptide core. Here we demonstrate that the flanking residues of the conalbumin peptide bound to I-A(k) have no effect on recognition by the D10 TCR. To study the role of peptide flanks for recognition by a second TCR, we determined the MHC and TCR contacting amino acids of the I-A(b) bound Ealpha peptide. The Ealpha peptide is shown to bind I-A(b) using four alanines as anchor residues. TCR recognition of Ealpha peptides with altered flanking residues again suggested that, in general, no specific interactions occurred with the peptide flanks. However, using an HLA-DM-mediated technique to measure peptide binding to MHC class II molecules, we found that the peptide flanking residues contribute substantially to MHC binding.

  18. Safety issues of tooth whitening using peroxide-based materials.

    PubMed

    Li, Y; Greenwall, L

    2013-07-01

    In-office tooth whitening using hydrogen peroxide (H₂O₂) has been practised in dentistry without significant safety concerns for more than a century. While few disputes exist regarding the efficacy of peroxide-based at-home whitening since its first introduction in 1989, its safety has been the cause of controversy and concern. This article reviews and discusses safety issues of tooth whitening using peroxide-based materials, including biological properties and toxicology of H₂O₂, use of chlorine dioxide, safety studies on tooth whitening, and clinical considerations of its use. Data accumulated during the last two decades demonstrate that, when used properly, peroxide-based tooth whitening is safe and effective. The most commonly seen side effects are tooth sensitivity and gingival irritation, which are usually mild to moderate and transient. So far there is no evidence of significant health risks associated with tooth whitening; however, potential adverse effects can occur with inappropriate application, abuse, or the use of inappropriate whitening products. With the knowledge on peroxide-based whitening materials and the recognition of potential adverse effects associated with the procedure, dental professionals are able to formulate an effective and safe tooth whitening regimen for individual patients to achieve maximal benefits while minimising potential risks.

  19. Digital modeling technology for full dental crown tooth preparation.

    PubMed

    Dai, Ning; Zhong, Yicheng; Liu, Hao; Yuan, Fusong; Sun, Yuchun

    2016-04-01

    A dental defect is one of the most common oral diseases, and it often requires a full crown restoration. In this clinical operation, the dentist must manually prepare the affected tooth for the full crown so that it has a convergence angle between 4° and 10°, no undercuts, and uniform and even shoulder widths and depths using a high speed diamond bur in the patient׳s mouth within one hour, which is a difficult task that requires visual-manual operation. The quality of the tooth preparation has an important effect on the success rate of the subsequent prosthodontic treatment. This study involved research into digital modeling technology for full dental crown tooth preparation. First, the margin line of the tooth preparation was designed using a semi-automatic interactive process. Second, the inserting direction was automatically computed. Then, the characteristic parameters and the constraints on the tooth preparation were defined for the model. Next, the shoulder and axial surface of the tooth preparation were formed using parametric modeling. Finally, the implicit surface of a radial basis function was used to construct the tooth preparation׳s occlusal surface. The experimental results verified that the method of digital modeling for full crown preparation proposed in this study can quickly and accurately implement personalized designs of various parameters, such as the shoulder width and the convergence angle; it provides a digital design tool for full crown preparation.

  20. The clinical measurement of tooth colour and stain.

    PubMed

    Brook, A H; Smith, R N; Lath, D J

    2007-10-01

    There are many contributory factors to tooth colour and different techniques for its measurement. The aim of this paper is to evaluate methods of tooth colour and stain measurement, with an emphasis on recent advances in objective clinical measurement techniques. The overall colour effect of natural teeth is created by a combination of light which is reflected and scattered by tooth enamel and the underlying dentine. Developmental defects of the dentition can affect the intrinsic discolouration of teeth, for example, amelogenesis imperfecta and dentinogenesis imperfecta. Extrinsic discolouration is predominantly caused by stain build up on a tooth surface from bacteria, foodstuffs or metalic compounds. Tooth colour and stain measurement are currently assessed using a wide range of measurement methods divided into subjective (visual shade matching) and objective instrumental assessment such as by colourimetry, spectrophotometry and digital image analysis. The most popular method of assessing tooth colour clinically is visual shade matching, as this approach is quick and simple to use. However, variation in results can occur as a consequence of the subjective nature of this method. The instrumental approaches including quantitative light-induced fluorescence remove or significantly reduce the subjective component. Image analysis appears to be the most suitable method for tooth colour measurement and further work is being carried out to establish this approach.

  1. A study of prevalence and distribution of tooth agenesis

    PubMed Central

    Bozga, A; Stanciu, RP; Mănuc, D

    2014-01-01

    Introduction. Tooth agenesis is a phenomenon that occurs relatively commonly. The incidence of the missing teeth presented in the previous reports varies according to the studied population. Objective. The aim of this study was to find the prevalence of tooth agenesis in a population group in Bucharest. Methods and results. The prevalence and distribution of dental agenesis was determined in a sample of 518 patients, 285 females and 233 males, aged 6 to 41 years, who had been treated in the Clinic of Orthodontics and Dentofacial Orthopedics in Bucharest. The tooth agenesis was diagnosed by using the orthodontic records and study casts for each patient. 35 of the patients, 17 males and 18 females, were diagnosed with at least one absent permanent tooth and 47 missing permanent teeth were reported. A prevalence of 6.757% was observed for tooth agenesis. The mandibular second premolar was found to be the most affected tooth, followed by the maxillary lateral incisor, maxillary second premolar, mandibular central incisors, mandibular second molar and mandibular lateral incisor. Discussion. The incidence of dental agenesis, its pattern and distribution per tooth type are in accordance with the previous published studies. PMID:25713620

  2. Tooth resorption in the Swedish Eurasion lynx (Lynx lynx).

    PubMed

    Pettersson, Ann

    2010-01-01

    The etiology of tooth resorption in the domestic cat remains unknown. The high prevalence and progressive nature of the disease complicates defining healthy control groups. In order to evaluate the possible influence of various life style changes on the prevalence of tooth resorption, healthy control groups are a prerequisite. This paper presents a prevalence study for tooth resorption in a free-ranging wild felidae population. Skulls from 46 free-ranging Eurasian lynx (Lynx lynx) were examined. The age of the animals had previously been estimated based on cementum annuli in the maxillary right canine tooth. The dental examination included both dental probing and radiographic imaging. Complicated fractures of the canine teeth were found in 9/46 (19.5%) skulls. In one fractured canine, apical root resorption and periapical lucency was detected. The root resorption was attributed to inflammatory resorption as a consequence of the initial dental trauma and necrotic pulp. No signs of tooth resorption were found in the remaining teeth. Supernumerary roots were detected in 18/46 skulls (39.1 %). Supernumerary "peg" teeth caudal to the mandibular first molar tooth were detected in 6/46 (13.0%) skulls. Although further studies on dental ultra-structure are needed, the Swedish Eurasian lynx may, in the future, be useful as a healthy comparative model for studies on the etiopathogenesis of tooth resorption in the domestic cat.

  3. ClC-7 Deficiency Impairs Tooth Development and Eruption

    PubMed Central

    Wang, He; Pan, Meng; Ni, Jinwen; Zhang, Yanli; Zhang, Yutao; Gao, Shan; Liu, Jin; Wang, Zhe; Zhang, Rong; He, Huiming; Wu, Buling; Duan, Xiaohong

    2016-01-01

    CLCN7 gene encodes the voltage gated chloride channel 7 (ClC-7) in humans. The mutations in CLCN7 have been associated with osteopetrosis in connection to the abnormal osteoclasts functions. Previously, we found that some osteopetrosis patients with CLCN7 mutations suffered from impacted teeth and root dysplasia. Here we set up two in vivo models under a normal or an osteoclast-poor environment to investigate how ClC-7 affects tooth development and tooth eruption. Firstly, chitosan-Clcn7-siRNA nanoparticles were injected around the first maxillary molar germ of newborn mice and caused the delay of tooth eruption and deformed tooth with root dysplasia. Secondly, E13.5 molar germs infected with Clcn7 shRNA lentivirus were transplanted under the kidney capsule and presented the abnormal changes in dentin structure, periodontal tissue and cementum. All these teeth changes have been reported in the patients with CLCN7 mutation. In vitro studies of ameloblasts, odontoblasts and dental follicle cells (DFCs) were conducted to explore the involved mechanism. We found that Clcn7 deficiency affect the differentiation of these cells, as well as the interaction between DFCs and osteoclasts through RANKL/OPG pathway. We conclude that ClC-7 may affect tooth development by directly targeting tooth cells, and regulate tooth eruption through DFC mediated osteoclast pathway. PMID:26829236

  4. Prevalence and Indicators of Tooth Wear among Chinese Adults

    PubMed Central

    Wei, Zhao; Du, Yangge; Zhang, Jing; Tai, Baojun

    2016-01-01

    Numerous epidemiological studies have focused on the prevalence and related indicators of tooth wear. However, no sufficient studies have been conducted with Chinese adults. The purpose of this study was to assess the prevalence of tooth wear and identify related indicators among adults aged 36 to 74 years in Wuhan City, P.R. China. A cross-sectional and analytic study was conducted with 720 participants, aged 35–49 yrs and 50–74 yrs, in 2014. Each age group included 360 participants, of which 50% were males and 50% were females. All participants completed a questionnaire before examination. Tooth wear was assessed using the modified Basic Erosive Wear Examination (BEWE) index. The data were analyzed using the chi-square test and binary logistic regression analysis. The prevalence of tooth wear was 67.5% and 100% in the 35–49 and 50–74 age groups, respectively. The prevalence of dentin exposure was 64.7% and 98.3%, respectively. A significantly higher prevalence of tooth wear and dentin exposure was found in the 50–74 yr group than in the 35–49 yr group (p < 0.05). Critical indicators of tooth wear and dentin exposure included high frequency of acidic drinks and foods consumption, low socio-economic status, and unilateral chewing. The frequency of changing toothbrushes and the habit of drinking water during meals were associated with tooth wear. In addition, the usage of hard-bristle toothbrushes and consuming vitamin C and aspirin were found to be linked with dentin exposure. In conclusion, the prevalence of tooth wear and dentin exposure observed in Chinese adults was high, and the results revealed an association between tooth wear and socio-behavioral risk indicators. PMID:27583435

  5. Explosive Percolation Transition is Actually Continuous

    NASA Astrophysics Data System (ADS)

    da Costa, R. A.; Dorogovtsev, S. N.; Goltsev, A. V.; Mendes, J. F. F.

    2010-12-01

    Recently a discontinuous percolation transition was reported in a new “explosive percolation” problem for irreversible systems [D. Achlioptas, R. M. D’Souza, and J. Spencer, Science 323, 1453 (2009)SCIEAS0036-807510.1126/science.1167782] in striking contrast to ordinary percolation. We consider a representative model which shows that the explosive percolation transition is actually a continuous, second order phase transition though with a uniquely small critical exponent of the percolation cluster size. We describe the unusual scaling properties of this transition and find its critical exponents and dimensions.

  6. Neoadjuvant Treatment in Rectal Cancer: Actual Status

    PubMed Central

    Garajová, Ingrid; Di Girolamo, Stefania; de Rosa, Francesco; Corbelli, Jody; Agostini, Valentina; Biasco, Guido; Brandi, Giovanni

    2011-01-01

    Neoadjuvant (preoperative) concomitant chemoradiotherapy (CRT) has become a standard treatment of locally advanced rectal adenocarcinomas. The clinical stages II (cT3-4, N0, M0) and III (cT1-4, N+, M0) according to International Union Against Cancer (IUCC) are concerned. It can reduce tumor volume and subsequently lead to an increase in complete resections (R0 resections), shows less toxicity, and improves local control rate. The aim of this review is to summarize actual approaches, main problems, and discrepancies in the treatment of locally advanced rectal adenocarcinomas. PMID:22295206

  7. Air resistance measurements on actual airplane parts

    NASA Technical Reports Server (NTRS)

    Weiselsberger, C

    1923-01-01

    For the calculation of the parasite resistance of an airplane, a knowledge of the resistance of the individual structural and accessory parts is necessary. The most reliable basis for this is given by tests with actual airplane parts at airspeeds which occur in practice. The data given here relate to the landing gear of a Siemanms-Schuckert DI airplane; the landing gear of a 'Luftfahrzeug-Gesellschaft' airplane (type Roland Dlla); landing gear of a 'Flugzeugbau Friedrichshafen' G airplane; a machine gun, and the exhaust manifold of a 269 HP engine.

  8. [Clinical consequences of dioxins exposure during tooth development].

    PubMed

    Maurin, J C; Bleicher, F; Magloire, H

    2005-11-01

    Commonly designed by the term "dioxins", polychlorinated aromatic hydrocarbons are environmental pollutants leading to several toxic effects during development and growth in embryo and child. The general consequences of dioxin exposure are particularly well-documented whereas only few data are mentioned by the experts concerning tooth development. However, studies performed in rodents have shown many disruptions during odontogenesis and enamel mineralisation. Moreover, recent epidemiological studies have demonstrated in human the incidence of dioxin exposure on enamel hypomineralisation and hypodontia. The aim of this review is to report recent data about consequences of dioxin exposure on tooth development, tooth being considered as a biological marker of potential dioxin poisoning.

  9. Overview of the geology of the east flank of the Front Range

    SciTech Connect

    Grose, T.L.T.

    1993-12-31

    This paper describes the geology encountered as part of a geology field trip. This stop identifies the monocline that forms the east flank of the Front Range and the west flank of the Denver Basin. The stratigraphic section viewed in cross section to the south is composed of: (1) migmatitic quartzo-feldspathic gneiss of Early Proterozoic age; (2) red sandstone and conglomerate of the Pennsylvanian-Permian Fountain Formation, 1,700 Feet thick; (3) Lyons Sandstone of Permian age, 200 feet thick; (4) shale, siltstone, and limestone of the Lykins Formation of Permian and Triassic age, 200 Feet thick; (5) gypsum, shale, and limestone of the Ralston Creek Formation of Jurassic age, 90 feet thick; (6) sandstone, shale, and limestone of the Morrison Formation of Jurassic age, 300 feet thick, locally containing dinosaur bones; (7) Lower Cretaceous Dakota Group, including the Lytle Formation of sandstone and conglomerate, 80 feet thick, and the South Platte Formation of sandstone and shale, 220 feet thick.

  10. Development of PCR-based codominant markers flanking the Alt3 gene in rye.

    PubMed

    Miftahudin; Scoles, G J; Gustafson, J P

    2004-04-01

    Aluminum (Al) toxicity is considered to be a major problem for crop growth and production on acid soils. The ability of crops to overcome Al toxicity varies among crop species and cultivars. Rye (Secale cereale L.) is the most Al-tolerant species among the Triticeae. Our previous study showed that Al tolerance in a rye F6 recombinant inbred line (RIL) population was controlled by a single gene designated as the aluminum tolerance (Alt3) gene on chromosome 4RL. Based on the DNA sequence of a rice (Oryza sativa L.) BAC clone suspected to be syntenic to the Alt3 gene region, we developed two PCR-based codominant markers flanking the gene. These two markers, a sequence-tagged site (STS) marker and a cleaved amplified polymorphic sequence (CAPS) marker, each flanked the Alt3 gene at an approximate distance of 0.4 cM and can be used to facilitate high-resolution mapping of the gene. The markers might also be used for marker-assisted selection in rye or wheat (Triticum aestivum L.) breeding programs to obtain Al-tolerant lines and (or) cultivars.

  11. Detection and direct genomic sequencing of multiple rare unknown flanking DNA in highly complex samples.

    PubMed

    Schmidt, M; Hoffmann, G; Wissler, M; Lemke, N; Müssig, A; Glimm, H; Williams, D A; Ragg, S; Hesemann, C U; von Kalle, C

    2001-05-01

    By identifying the sequence of retro- and lentiviral integration sites in peripheral blood leukocytes, the clonal composition and fate of genetically modified hematopoietic progenitor and stem cells could be mapped in vitro and in vivo. Previously available methods have been limited to the analysis of mono- or oligoclonal integration sites present in high copy numbers. Here, we perform characterization of multiple rare retroviral and lentiviral integration sites in highly complex DNA samples. The reliability of this method results from nontarget DNA removal via magnetic extension primer tag selection (EPTS) preceding solid-phase ligation-mediated PCR. EPTS/LM-PCR allowed the simultaneous direct genomic sequencing of multiple proviral LTR-flanking sequences of retro- and lentiviral vectors even if only 1 per 100 to 1000 cells contained the provirus. A primer walking "around" the integration locus demonstrated the adaptability of EPTS/LM-PCR to study unknown flanking DNA regions unrelated to proviruses. The technique is fast, inexpensive, and sensitive in minimal samples. It enables studies of retro- and lentiviral integration, viral vector tracking in gene therapy, insertional mutagenesis, transgene integration, and direct genomic sequencing that until now have been difficult or impossible to perform.

  12. Volcano flank instability in the Lesser Antilles Arc: Diversity of scale, processes, and temporal recurrence

    NASA Astrophysics Data System (ADS)

    Boudon, Georges; Le Friant, Anne; Komorowski, Jean-Christophe; Deplus, Christine; Semet, Michel P.

    2007-08-01

    The 1997 Boxing Day collapse, a remarkable feature of the ongoing eruption of Soufrière Hills on Montserrat, has prompted new interest in the study of volcano stability in the Lesser Antilles. Building on a few cases documented in the literature, we have now identified at least 47 flank collapse events on volcanoes of the Caribbean arc where this type of behavior is characteristic and repetitive. About 15 events occurred on active volcanoes within the last 12,000 years. In the northern part of the arc, flank collapses are repetitive, do not exceed 1 km3 in volume, occur in all directions, and are promoted by intense hydrothermal alteration and well-developed fracturing of the summit part of the edifices. In contrast, infrequent but large sector collapses, with volumes up to tens of km3, are typical of the southern volcanoes. They are always directed to the west as a result of the high overall slopes of the islands toward the deep back-arc Grenada Basin. Because Caribbean islands are small, a large part of the resulting debris avalanches have flowed into the sea thus contributing voluminous and sudden inputs of volcaniclastic sediments to the Grenada Basin. Deposits from such submarine flows have been identified during the recent AGUADOMAR and CARAVAL oceanographic cruises and traced to their source structures on land. Edifice collapses have a major influence on subsequent volcanic activity but also are of high concern because of their tsunamigenic potential.

  13. Flanking sequence context-dependent transcription factor binding in early Drosophila development

    PubMed Central

    2013-01-01

    Background Gene expression in the Drosophila embryo is controlled by functional interactions between a large network of protein transcription factors (TFs) and specific sequences in DNA cis-regulatory modules (CRMs). The binding site sequences for any TF can be experimentally determined and represented in a position weight matrix (PWM). PWMs can then be used to predict the location of TF binding sites in other regions of the genome, although there are limitations to this approach as currently implemented. Results In this proof-of-principle study, we analyze 127 CRMs and focus on four TFs that control transcription of target genes along the anterio-posterior axis of the embryo early in development. For all four of these TFs, there is some degree of conserved flanking sequence that extends beyond the predicted binding regions. A potential role for these conserved flanking sequences may be to enhance the specificity of TF binding, as the abundance of these sequences is greatly diminished when we examine only predicted high-affinity binding sites. Conclusions Expanding PWMs to include sequence context-dependence will increase the information content in PWMs and facilitate a more efficient functional identification and dissection of CRMs. PMID:24093548

  14. Insulators recruit histone methyltransferase dMes4 to regulate chromatin of flanking genes

    PubMed Central

    Lhoumaud, Priscillia; Hennion, Magali; Gamot, Adrien; Cuddapah, Suresh; Queille, Sophie; Liang, Jun; Micas, Gael; Morillon, Pauline; Urbach, Serge; Bouchez, Olivier; Severac, Dany; Emberly, Eldon; Zhao, Keji; Cuvier, Olivier

    2014-01-01

    Chromosomal domains in Drosophila are marked by the insulator-binding proteins (IBPs) dCTCF/Beaf32 and cofactors that participate in regulating long-range interactions. Chromosomal borders are further enriched in specific histone modifications, yet the role of histone modifiers and nucleosome dynamics in this context remains largely unknown. Here, we show that IBP depletion impairs nucleosome dynamics specifically at the promoters and coding sequence of genes flanked by IBP binding sites. Biochemical purification identifies the H3K36 histone methyltransferase NSD/dMes-4 as a novel IBP cofactor, which specifically co-regulates the chromatin accessibility of hundreds of genes flanked by dCTCF/Beaf32. NSD/dMes-4 presets chromatin before the recruitment of transcriptional activators including DREF that triggers Set2/Hypb-dependent H3K36 trimethylation, nucleosome positioning, and RNA splicing. Our results unveil a model for how IBPs regulate nucleosome dynamics and gene expression through NSD/dMes-4, which may regulate H3K27me3 spreading. Our data uncover how IBPs dynamically regulate chromatin organization depending on distinct cofactors. PMID:24916307

  15. The CYP2B2 5' flank contains a complex glucocorticoid response unit.

    PubMed

    Audet-Walsh, Etienne; Lachaud, Antoine Amaury; Anderson, Alan

    2008-11-15

    Rat CYP2B1 and CYP2B2 and mouse CYP2B10 are dramatically induced by phenobarbital (PB) in liver. PB responsiveness requires the constitutive androstane receptor (CAR). However, dexamethasone treatment can also induce CYP2B genes in both rat and mouse liver. Three regions have been shown to be involved in conferring dexamethasone responsiveness on CYP2B2 reporter constructs. They are the PB response unit, a functional glucocorticoid response element at -1.3kb in the 5' flank and a weak element in the basal promoter. We report here the identification, by deletion analysis of the CYP2B2 5' flank, of new glucocorticoid response elements or accessory factor sites. Moreover, we show that CAR acts as an accessory factor in the dexamethasone response in vivo of CYP2B10 protein in mice, by increasing both the basal and induced levels. We propose a model to explain the dexamethasone responsiveness of the CYP2B2 gene in which induction is mediated by a complex glucocorticoid response unit.

  16. Different chromatin structures along the spacers flanking active and inactive Xenopus rRNA genes.

    PubMed Central

    Lucchini, R; Sogo, J M

    1992-01-01

    The accessibility of DNA in chromatin to psoralen was assayed to compare the chromatin structure of the rRNA coding and spacer regions of the two related frog species Xenopus laevis and Xenopus borealis. Isolated nuclei from tissue culture cells were photoreacted with psoralen, and the extent of cross-linking in the different rDNA regions was analyzed by using a gel retardation assay. In both species, restriction fragments from the coding regions showed two distinct extents of cross-linking, indicating the presence of two types of chromatin, one that contains nucleosomes and represents the inactive gene copies, and the other one which is more cross-linked and corresponds to the transcribed genes. A similar cross-linking pattern was obtained with restriction fragments from the enhancer region. Analysis of fragments including these sequences and the upstream portions of the genes suggests that active genes are preceded by nonnucleosomal enhancer regions. The spacer regions flanking the 3' end of the genes gave different results in the two frog species. In X. borealis, all these sequences are packaged in nucleosomes, whereas in X. laevis a distinct fraction, presumably those flanking the active genes, show a heterogeneous chromatin structure. This disturbed nucleosomal organization correlates with the presence of a weaker terminator at the 3' end of the X. laevis genes compared with those of X. borealis, which allows polymerases to transcribe into the downstream spacer. Images PMID:1406621

  17. Characterization of the Nanog 5′-flanking Region in Bovine

    PubMed Central

    Choi, Don-Ho; Kim, Duk-Jung; Song, Ki-Duk; Park, Hwan-Hee; Ko, Tae Hyun; Pyao, Yuliya; Chung, Ku-Min; Cha, Seok Ho; Sin, Young-Su; Kim, Nam-Hyung; Lee, Woon-Kyu

    2016-01-01

    Bovine embryonic stem cells have potential for use in research, such as transgenic cattle generation and the study of developmental gene regulation. The Nanog may play a critical role in maintenance of the undifferentiated state of embryonic stem cells in the bovine, as in murine and human. Nevertheless, efforts to study the bovine Nanog for pluripotency-maintaining factors have been insufficient. In this study, in order to understand the mechanisms of transcriptional regulation of the bovine Nanog, the 5′-flanking region of the Nanog was isolated from ear cells of Hanwoo. Results of transient transfection using a luciferase reporter gene under the control of serially deleted 5′-flanking sequences revealed that the −134 to −19 region contained the positive regulatory sequences for the transcription of the bovine Nanog. Results from mutagenesis studies demonstrated that the Sp1-binding site that is located in the proximal promoter region plays an important role in transcriptional activity of the bovine Nanog promoter. The electrophoretic mobility shift assay with the Sp1 specific antibody confirmed the specific binding of Sp1 transcription factor to this site. In addition, significant inhibition of Nanog promoter activity by the Sp1 mutant was observed in murine embryonic stem cells. Furthermore, chromatin-immunoprecipitation assay with the Sp1 specific antibody confirmed the specific binding of Sp1 transcription factor to this site. These results suggest that Sp1 is an essential regulatory factor for bovine Nanog transcriptional activity. PMID:27165025

  18. Character of shell beds flanking Herod Point shoal, southeastern Long Island Sound, New York

    USGS Publications Warehouse

    Poppe, L.J.; Williams, S.J.; Babb, Ivar G.

    2011-01-01

    High biogenic productivity, strong tidal currents, shoal topography, and short transport distances combine to favor shell-bed formation along the lower flanks of a cape-associated shoal off Herod Point on Long Island, New York. This shell bed has a densely packed, clast-supported fabric composed largely of undegraded surf clam (Spisula solidissima) valves. It is widest along the central part of the western flank of the shoal where topographic gradients are steep and a stronger flood tide results in residual flow. The bed is narrower and thinner toward the landward margins where currents are too weak to transport larger valves and topographic gradients are gentle, limiting bed-load transport mechanisms by which the shells are concentrated. Reconnaissance mapping off Roanoke Point suggests that shell beds are also present at the other cape-associated shoals off northeastern Long Island, where relatively similar geomorphic and oceanographic conditions exist. These shell beds are important to the Long Island Sound ecosystem because they provide complex benthic habitats of rough and hard substrates at the boundary between the muddy basin floor and mobile sand of the shoals. ?? 2011, the Coastal Education & Research Foundation (CERF).

  19. Stratigraphy and Characterization of Volcanic Deposits on the Northwestern Flanks of Mt. Makiling, Laguna, Philippines

    NASA Astrophysics Data System (ADS)

    Ybanez, R. L.; Bonus, A. A. B.; Judan, J. M.; Racoma, B. A.; Morante, K. A. M.; Balangue, M. I. R. D.

    2014-12-01

    Mt. Makiling is an inactive stratovolcano located in the province of Laguna. Semi-detailed geologic field mapping on the northwestern low-level flanks and apron of the volcano was conducted. Exposures reveal a volcanic terrain hosting a wide variety of volcanic rocks: lava flows, pyroclastic surges, pyroclastic flows, and tuff deposits. Stratigraphic logging of the volcanic deposits showed differences in occurrence of the deposit types as well as their characteristics. The pyroclastic flow deposits are found at the base of the column overlain by pyroclastic surges which were more common in the area. Capping the pyroclastic surges is a thin layer of tuffaceous units. Isolated deposits of lava flows of andesitic composition were mapped in the western flank of Mt. Makiling. These varying volcanic deposits are derived from different eruptive activities of Mt. Makiling, with at least three separate eruptive episodes indicated by the exposed deposits. Two separate explosive eruptions are marked by two different pyroclastic deposits, while an effusive episode, marked by andesitic lava flows, can also be identified. The pyroclastic surge deposit is uncharacteristically thick, around a hundred meters or more exposed, providing further questions as to the magnitude of past eruptions or the mechanism of pyroclastic material deposition around the volcano. Mt. Makiling, thus, has historically undergone different eruption types, but still releases generally the same material composition across varying deposits: intermediate or andesitic composition. This is consistent with the trend of Philippine volcanoes, and with the Macolod corridor which hosts this volcanic system.

  20. Crystal structure of PHO4 bHLH domain-DNA complex: flanking base recognition.

    PubMed Central

    Shimizu, T; Toumoto, A; Ihara, K; Shimizu, M; Kyogoku, Y; Ogawa, N; Oshima, Y; Hakoshima, T

    1997-01-01

    The crystal structure of a DNA-binding domain of PHO4 complexed with DNA at 2.8 A resolution revealed that the domain folds into a basic-helix-loop-helix (bHLH) motif with a long but compact loop that contains a short alpha-helical segment. This helical structure positions a tryptophan residue into an aromatic cluster so as to make the loop compact. PHO4 binds to DNA as a homodimer with direct reading of both the core E-box sequence CACGTG and its 3'-flanking bases. The 3'-flanking bases GG are recognized by Arg2 and His5. The residues involved in the E-box recognition are His5, Glu9 and Arg13, as already reported for bHLH/Zip proteins MAX and USF, and are different from those recognized by bHLH proteins MyoD and E47, although PHO4 is a bHLH protein. PMID:9303313

  1. Hydrothermal recharge and discharge across 50 km guided by seamounts on a young ridge flank.

    PubMed

    Fisher, A T; Davis, E E; Hutnak, M; Spiess, V; Zühlsdorff, L; Cherkaoui, A; Christiansen, L; Edwards, K; Macdonald, R; Villinger, H; Mottl, M J; Wheat, C G; Becker, K

    2003-02-06

    Hydrothermal circulation within the sea floor, through lithosphere older than one million years (Myr), is responsible for 30% of the energy released from plate cooling, and for 70% of the global heat flow anomaly (the difference between observed thermal output and that predicted by conductive cooling models). Hydrothermal fluids remove significant amounts of heat from the oceanic lithosphere for plates typically up to about 65 Myr old. But in view of the relatively impermeable sediments that cover most ridge flanks, it has been difficult to explain how these fluids transport heat from the crust to the ocean. Here we present results of swath mapping, heat flow, geochemistry and seismic surveys from the young eastern flank of the Juan de Fuca ridge, which show that isolated basement outcrops penetrating through thick sediments guide hydrothermal discharge and recharge between sites separated by more than 50 km. Our analyses reveal distinct thermal patterns at the sea floor adjacent to recharging and discharging outcrops. We find that such a circulation through basement outcrops can be sustained in a setting of pressure differences and crustal properties as reported in independent observations and modelling studies.

  2. Preliminary Results of Heat flow Measurements across the Eastern Flank of the Adare Trough, Antarctica

    NASA Astrophysics Data System (ADS)

    Hong, J. K.; Kim, Y. G.; Jin, Y. K.

    2015-12-01

    Marine heat flow measurement on the ridge is a direct and useful approach to know the current state of thermal regime below the lithosphere. Measurements in ridges located in the Antarctica are practically challenged by harsh conditions such as extensive and moving sea ice cover and stiff seafloor composed of diatomaceous sediments. We planned heat flow measurements across the Adare Trough, north of the Ross Sea, during the recent Korean icebreaker R/V Araon's Antarctic expedition (ANA05B; Dec 12th 2014-Feb 25th 2015) to get thermal information which is a missing piece in terms of geophysical data in this region to describe its asymmetric activity in spreading rate. Finally, we collected information only at three stations across the eastern flank of the Adare Trough over 70 km along with NBP9702 seismic line because of various limitations above. It is a preliminary result that observed heat flow seems significantly higher than estimated one from known magnetic anomaly age using a global age-heat flow curve. In order to conclude some suggestion, we need further studies regarding identification of 'real' heat flow from lithosphere, and increase of the number of data. More heat flow measurements will be carried out again on the eastern flank in the next Araon's Antarctic expedition (tentatively ANA06C; March 2016) to supplement the small number of data.

  3. Microbial community in black rust exposed to hot ridge flank crustal fluids.

    PubMed

    Nakagawa, Satoshi; Inagaki, Fumio; Suzuki, Yohey; Steinsbu, Bjørn Olav; Lever, Mark Alexander; Takai, Ken; Engelen, Bert; Sako, Yoshihiko; Wheat, Charles Geoffrey; Horikoshi, Koki

    2006-10-01

    During Integrated Ocean Drilling Program Expedition 301, we obtained a sample of black rust from a circulation obviation retrofit kit (CORK) observatory at a borehole on the eastern flank of Juan de Fuca Ridge. Due to overpressure, the CORK had failed to seal the borehole. Hot fluids from oceanic crust had discharged to the overlying bottom seawater and resulted in the formation of black rust analogous to a hydrothermal chimney deposit. Both culture-dependent and culture-independent analyses indicated that the black-rust-associated community differed from communities reported from other microbial habitats, including hydrothermal vents at seafloor spreading centers, while it shared phylotypes with communities previously detected in crustal fluids from the same borehole. The most frequently retrieved sequences of bacterial and archaeal 16S rRNA genes were related to the genera Ammonifex and Methanothermococcus, respectively. Most phylotypes, including phylotypes previously detected in crustal fluids, were isolated in pure culture, and their metabolic traits were determined. Quantification of the dissimilatory sulfite reductase (dsrAB) genes, together with stable sulfur isotopic and electron microscopic analyses, strongly suggested the prevalence of sulfate reduction, potentially by the Ammonifex group of bacteria. Stable carbon isotopic analyses suggested that the bulk of the microbial community was trophically reliant upon photosynthesis-derived organic matter. This report provides important insights into the phylogenetic, physiological, and trophic characteristics of subseafloor microbial ecosystems in warm ridge flank crusts.

  4. Sequences flanking the core-binding site modulate glucocorticoid receptor structure and activity

    PubMed Central

    Schöne, Stefanie; Jurk, Marcel; Helabad, Mahdi Bagherpoor; Dror, Iris; Lebars, Isabelle; Kieffer, Bruno; Imhof, Petra; Rohs, Remo; Vingron, Martin; Thomas-Chollier, Morgane; Meijsing, Sebastiaan H.

    2016-01-01

    The glucocorticoid receptor (GR) binds as a homodimer to genomic response elements, which have particular sequence and shape characteristics. Here we show that the nucleotides directly flanking the core-binding site, differ depending on the strength of GR-dependent activation of nearby genes. Our study indicates that these flanking nucleotides change the three-dimensional structure of the DNA-binding site, the DNA-binding domain of GR and the quaternary structure of the dimeric complex. Functional studies in a defined genomic context show that sequence-induced changes in GR activity cannot be explained by differences in GR occupancy. Rather, mutating the dimerization interface mitigates DNA-induced changes in both activity and structure, arguing for a role of DNA-induced structural changes in modulating GR activity. Together, our study shows that DNA sequence identity of genomic binding sites modulates GR activity downstream of binding, which may play a role in achieving regulatory specificity towards individual target genes. PMID:27581526

  5. Splicing of intron 3 of human BACE requires the flanking introns 2 and 4.

    PubMed

    Annies, Maik; Stefani, Muriel; Hueber, Andreas; Fischer, Frauke; Paganetti, Paolo

    2009-10-16

    Regulation of proteolytic cleavage of the amyloid precursor protein by the aspartic protease BACE may occur by alternative splicing and the generation of enzymatically inactive forms. In fact, the presence of exonic donor and acceptor sites for intron 3 generates the two deficient variants BACE457 and BACE476. In HEK293 cells, when introns are inserted separately in the BACE cDNA, we found that whilst introns 2 and 4 are efficiently spliced out, intron 3 is not removed. On the other hand, splicing to wild-type BACE is restored when intron 3 is flanked by the two other introns. The presence of all three introns also leads to alternative splicing of intron 3 and the generation of BACE476. In contrast, BACE457 expression takes place only after mutating the donor splice site of intron 3, indicating that additional regulatory elements are necessary for the use of the splicing site within exon 4. Overall, our data demonstrate that a complex splicing of intron 3 regulates the maturation of the BACE mRNA. This appears orchestrated by domains present in the exons and introns flanking intron 3. Excessive BACE activity is a risk factor for Alzheimer's disease, therefore this complex regulation might guarantee low neuronal BACE activity and disease prevention.

  6. Renal infarction versus pyelonephritis in a woman presenting with fever and flank pain.

    PubMed

    Piccoli, Giorgina B; Priola, Adriano M; Vigotti, Federica N; Guzzo, Gabriella; Veltri, Andrea

    2014-08-01

    Patients with fever, flank pain, and dysuria frequently are encountered in the emergency department. Acute pyelonephritis is the most likely diagnosis; however, its clinical and radiologic presentation consistently overlap with that of acute renal infarction. Ultrasound is unable to distinguish early infarction from nonabscessed acute pyelonephritis. Hence, computed tomography or magnetic resonance imaging are needed. We report the case of a 68-year-old woman who presented with fever, flank pain, and dysuria, along with respiratory distress and tachycardia. Elevated values for inflammatory indexes suggested a diagnosis of acute pyelonephritis, and subsequent contrast-enhanced computed tomography showed hypodense wedge-shaped areas in both kidneys. However, the presence of a thin rim of capsular enhancement (cortical rim sign), the absence of perirenal inflammatory changes, and the location of the lesions apart from defined calyces suggested the alternative diagnosis of renal infarction. The underlying cause was not identified until an episode of acute dyspnea revealed paroxysmal arrhythmia. Our case demonstrates that a thorough knowledge of the imaging findings of renal infarction and acute pyelonephritis is essential to correctly making the diagnosis.

  7. Investigating the probability of sign inconsistency in the regression coefficients of markers flanking quantitative trait loci.

    PubMed Central

    Hwang, J T Gene; Nettleton, Dan

    2002-01-01

    Estimates of the locations and effects of quantitative trait loci (QTL) can be obtained by regressing phenotype on marker genotype. Under certain basic conditions, the signs of regression coefficients flanking QTL must be the same. There is no guarantee, however, that the signs of the regression coefficient estimates will be the same. We use sign inconsistency to describe the situation in which there is disagreement between the signs of the estimated regression coefficients flanking QTL. The presence of sign inconsistency can undermine the effectiveness of QTL mapping strategies that presume intervals whose markers have regression coefficient estimates of differing sign to be devoid of QTL. This article investigates the likelihood of sign inconsistency under various conditions. We derive an analytic expression for the approximate probability of sign inconsistency in the single-QTL case. We also examine sign inconsistency probabilities when multiple QTL are present through simulation. We have discovered that the probability of sign inconsistency can be unacceptably high, even when the conditions for QTL detection are otherwise quite favorable. PMID:11973322

  8. Electromagnetic evidence for an ancient avelanche caldera rim onthe south flank of mount merapi, indonesia

    SciTech Connect

    Kalscheuer, T.; Commer, M.; Helwig, S.L.; Hoerdt, A.; Tezkan, B.

    2006-02-28

    Long-Offset Transient Electromagnetic (LOTEM) data andVIBROTEM data from the south flank of Mount Merapi on Java island,Indonesia, are interpreted with one-dimensional (1D) inversions as wellas two-dimensional (2D) forward modelling. One-dimensional jointinversions of several components of the electromagnetic field withOccam's method reduce the number of equivalent models, which were derivedfrom inversions of single components and fit the data to a similarmisfit. The 1D results, together with results from other geophysicalmeasurements, serve as the basic model for further 2D forward modelling.The final model depicts a layering that follows the topography of thestrato-volcano. In the depth range of 500 m to 1000 m, the resistivity ofthe layers decreases rapidly downwards into a good conductor withresistivities below 10 OMEGAm. The deepest layer has a resistivity of 0.4OMEGAm which is quantitatively explained with a combination of salinefluids and hydrothermally altered minerals. Furthermore, the final modelsupports a hypothesis from the interpretation of central-loop TEM(Transient Electromagnetic) data that there is a fault structure belowthe southern flank, approximately 7.3 km south of the summit. To thenorth of the fault, the top of the good conductor is lowered from a depthof 500 m to 1000 m. We propose that the fault structure coincides with anancient avalanche caldera rim.

  9. Role of large flank-collapse events on magma evolution of volcanoes. Insights from the Lesser Antilles Arc

    NASA Astrophysics Data System (ADS)

    Boudon, G.; Villemant, B.; Le Friant, A.; Paterne, M.; Cortijo, E.

    2012-12-01

    Flank-collapse events are now recognized as common process of destruction of volcanoes. They can occur several times on a volcanic edifice and may involve a large range of volume of material from km3 to thousands of km3. Large flank-collapse events may have significant effects on magma eruption and evolution. The load exerted by the volcanic edifice on the plumbing system and the magma chamber acts as a density filter for magma ascent. Magmas denser than the density threshold are stored within the magma chamber where they differentiate and thus become less dense with time which favours their eruption. When a flank-collapse event occurs the edifice load suddenly decreases which decreases the density threshold allowing denser magmas to ascend and erupt. Thus construction and destruction of volcanic edifices may control both differentiation and eruptive processes. In the Lesser Antilles Arc, a large number of flank-collapse events have been identified. Here, we show that some of the largest events are correlated to significant variations in erupted magma compositions and eruptive styles. On Montagne Pelée, after the 32 kys old flank-collapse event, the magma production rate is sustained during several thousand years: basic and dense magmas were emitted through open-vent eruptions that generated abundant scoria flows. The pre-flank collapse activity produced significantly more acidic magmas. The rapid building of a new cone after the flank collapse progressively increased the load and the density threshold, leading to a decrease in magma production rate and a change in the magma composition of the erupted products. They are more acidic and less dense and thus generate plinian and dome-forming eruptions up to present. On the contrary, at Soufrière Volcanic Centre of St Lucia and at Pitons du Carbet in Martinique, the flank collapses have an opposite effect: in both cases, more acidic magmas erupted after the flank collapse events. These magmas are highly crystallized

  10. 21 CFR 872.3750 - Bracket adhesive resin and tooth conditioner.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Bracket adhesive resin and tooth conditioner. 872... and tooth conditioner. (a) Identification. A bracket adhesive resin and tooth conditioner is a device... to a tooth surface. (b) Classification. Class II....

  11. 21 CFR 872.3750 - Bracket adhesive resin and tooth conditioner.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bracket adhesive resin and tooth conditioner. 872... and tooth conditioner. (a) Identification. A bracket adhesive resin and tooth conditioner is a device... to a tooth surface. (b) Classification. Class II....

  12. 21 CFR 872.3750 - Bracket adhesive resin and tooth conditioner.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Bracket adhesive resin and tooth conditioner. 872... and tooth conditioner. (a) Identification. A bracket adhesive resin and tooth conditioner is a device... to a tooth surface. (b) Classification. Class II....

  13. 21 CFR 872.3750 - Bracket adhesive resin and tooth conditioner.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Bracket adhesive resin and tooth conditioner. 872... and tooth conditioner. (a) Identification. A bracket adhesive resin and tooth conditioner is a device... to a tooth surface. (b) Classification. Class II....

  14. 21 CFR 872.3750 - Bracket adhesive resin and tooth conditioner.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Bracket adhesive resin and tooth conditioner. 872... and tooth conditioner. (a) Identification. A bracket adhesive resin and tooth conditioner is a device... to a tooth surface. (b) Classification. Class II....

  15. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  16. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  17. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  18. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  19. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  20. Seismic Evidence of Abundant Flank Magmatism at the Endeavour Segment, Juan de Fuca Ridge

    NASA Astrophysics Data System (ADS)

    Hooft, E. E.; Wells, A. E.; Toomey, D. R.; Wilcock, W. S.

    2013-12-01

    Oceanic crust forms primarily within a narrow, several-kilometer wide, neovolcanic zone at mid-ocean ridges; however, there is an increasing recognition that crustal structure at fast-spreading ridges is modified by off-axis magmatism. Here we use seismic data to show that flank magmatism is also common at an intermediate spreading-rate ridge. We detect several crustal-level, low-velocity, high-attenuation regions on the eastern and western ridge flanks, 7 to 16 km from the neovolcanic zone at the Endeavour segment of the Juan de Fuca Ridge. Seismic refraction data were collected using 64 ocean bottom seismometers (OBSs) and 5,567 airgun shots from the 6600 in3 airgun array of the R/V Marcus G. Langseth in a region extending along the entire ridge segment and out to ~30 km from the rise axis on either side. We observe amplitude anomalies for crustal phases, Pg, for a variety of source-receiver azimuths indicative of numerous anomalous seismic regions on the ridge flanks. We use finite-difference waveform forward modeling to estimate the dimensions, depth, and seismic properties of two of the inferred anomalous regions. The attenuating regions extend horizontally from 2 to 15 km beneath off-axis, ridge-parallel bathymetric highs and from 2 to 4 km below the seafloor. The velocity reduction and the attenuation anomalies suggest the presence of high temperatures and perhaps a small percentage of melt. One anomalous region is associated with a mid-crustal reflector observed in multi-channel seismic data and other mid-crustal reflectors are also present off axis in the region. We attribute the observed seismic anomalies to off-axis magmatic intrusions. Seismic tomography has shown that the upper-crustal, low-velocity layer is thickened on the outer flanks of these highs. This suggests that off-axis volcanism could contribute to the formation of the highs, with erupted lava flowing down the off-axis slopes forming the thicker upper-crustal low-velocity layer. The

  1. A deep scar in the flank of Tenerife (Canary Islands): Geophysical contribution to tsunami hazard assessment

    NASA Astrophysics Data System (ADS)

    Coppo, Nicolas P.; Schnegg, Pierre-André; Falco, Pierik; Costa, Roberto

    2009-05-01

    Among the high-intensity on-Earth tsunami generating events, seismicity, submarine landslides, and volcano lateral collapses are the most important [Ward, S.H., 2001. Landslide tsunami. J. Geophy. Res. 106, 11201-11215; Holcomb, R.T., Searle, R.C., 1991. Large landslides from oceanic volcanoes. Mar. Geotech. 10, 19-32; Tinti, S., Bortolucci, E., Romagnoli, C., 2000. Computer simulations of tsunamis due to the sector collapse ar Stromboli, Italy. J. Volcano. Geotherm. Res. 96, 103-128; Ward, S.N., Day, S., 2003. Ritter Island Volcano — lateral collapse and the tsunami of 1888. Geophys. J. Int. 154, 891-902; MacGuire, W.J., 2003. Volcano instability and lateral collapse. Revista 1, 33-45]. Offshore bathymetry studies highlighted huge accumulations of large mass-waste flows (up to thousands cubic kilometres) inherited from past lateral collapses or submarine landslides [ Le Friant, A., Boudon, G., Deplus, C., Villemant, B., 2003. Large-scale flank collapse events during the activity of Montagne Pelée, Martinique, Lesser Antilles. J. Geophys. Res. 108, ECV13; Moore, J.G. et al., 1989. Prodigious submarine Landslides on the Hawaiian ridge. J. Geophys. Res. 94, 17465-17484] which spread over more than 100 km off the northern Tenerife (Canary Islands) coastline [Watts, A.B., Masson, D.G., 1995. A giant landslide on the north flank of Tenerife, Canary Islands. J. Geophys. Res. 100, 24487-24498]. Although mechanics and dynamics triggering such catastrophic events follow from combined complex processes and interactions [Hürlimann, M., Garcia-Piera, J.-O., Ledesma, A., 2000. Causes and mobility of large volcanic landslides: application to Tenerife, Canary Islands. J. Volcano. Geotherm. Res. 103, 121-134; Masson, D.G. et al., 2002. Slope failures on the flanks of the western Canary Islands. Earth-Sci. Rev. 57, 1-35; Reid, M.E., Sisson, T.W., Brien, D.L., 2001. Volcano collapse promoted by hydrothermal alteration and edifice shape, Mount Rainier, Washington. Geology 29, 779

  2. Multidisciplinary geophysical study of the NE sector of the unstable flank of Etna volcano

    NASA Astrophysics Data System (ADS)

    Bonforte, Alessandro; Cocina, Ornella; Siniscalchi, Agata; Barberi, Graziella; Guglielmino, Francesco; Romano, Gerardo; Sicali, Simona; Tripaldi, Simona

    2015-04-01

    On volcanic areas, usually characterized by complex structural environments, a lot of independent geophysical studies are usually performed. The non-uniqueness of the geophysical inverse models, the different level of resolution and sensitivity of the results spurred us to integrate independent geophysical datasets and results collected on Mt. Etna volcano, in order to obtain more accurate and reliable model interpretation. Mt. Etna volcano is located along the eastern coast of Sicily and it is characterized by a complex structural setting. In this region, the general N-S compressive regime related to the Africa - Europe collision interacts with the WNW-ESE extensional regime associated to the Malta Escarpment dynamics, observable along the eastern coast of Sicily. At Mt Etna, a great number of studies concerns the existence of instability phenomena; a general eastward motion of the eastern flank of the volcano has been measured with always increasing detail and its relationship with the eruptive and magmatic activity is being investigated. The unstable flank appears bounded to the north by the E-W-trending Provenzana - Pernicana Fault System and to the SW by the NS Ragalna Fault system. Eastwards, this area is divided by several NW-SE trending faults. Recent studies consider this area as divided into several blocks characterized by different shape and kinematics. Ground deformation studies (GPS and InSAR) define the NE portion of the unstable flank as the most mobile one. In the frame of the MEDiterranean Supersites Volcanoes (MED-SUV) project, ground deformation data (GPS and INSAR), 3D seismicity, seismic tomography and two resistivity model profiles, have been analyzed together, in order to put some constraints on the deep structure of the NE sector of the unstable flank. Seismic data come from the permanent network run by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) - Sezione di Catania, Osservatorio Etneo. Ground deformation data comes from In

  3. Study of the kinematic and load sharing properties of wormgearing with non-symmetric tooth profiles

    NASA Astrophysics Data System (ADS)

    Sun, D. C.; Yuan, Qin

    1995-01-01

    The geometry of non-symmetric tooth profiles, i.e. tooth profiles with different pressure angles on the two sides of the tooth, is studied. A feasible non-symmetric tooth profile for application in helicopter transmissions is laid out as the best compromise among several conflicting factors. The non-symmetric tooth profile is then compared with the symmetric tooth profile studied previously. Based on the detailed comparisons it is concluded that the use of the non-symmetric tooth profile would severely limit the face width of the worm, consequently reduce the number of meshing teeth and cause much higher normal load on the individual gear teeth.

  4. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  5. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 10 2012-01-01 2012-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  6. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  7. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  8. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  9. Complications associated with cheek tooth extraction in the horse.

    PubMed

    Earley, Edward T; Rawlinson, Jennifer E; Baratt, Robert M

    2013-01-01

    Common indications for cheek tooth extraction in the horse include dental fracture, periodontal disease, severe decay/ caries, mandibular fracture with alveolar/tooth involvement, and periapical abscess. Complications secondary to extraction of cheek teeth are prevalent. Typical complications may include retained root tip(s), collateral damage of neighboring teeth and alveolar bone, mandibular fracture non-union or delayed union, cemental ankylosis, dilacerated root(s), oroantral/oronasal fistula, palatal deviation of cheek teeth, bone sequestration, sinus involvement, alveolar plug failure, and palatine artery laceration. This paper presents a series of cases that had complications following cheek tooth extraction. Anticipation of problematic extractions, recognition of complications, and appropriate treatment will aid the clinician in managing the inevitable cheek tooth extraction complication.

  10. The actual status of Astronomy in Moldova

    NASA Astrophysics Data System (ADS)

    Gaina, A.

    The astronomical research in the Republic of Moldova after Nicolae Donitch (Donici)(1874-1956(?)) were renewed in 1957, when a satellites observations station was open in Chisinau. Fotometric observations and rotations of first Soviet artificial satellites were investigated under a program SPIN put in action by the Academy of Sciences of former Socialist Countries. The works were conducted by Assoc. prof. Dr. V. Grigorevskij, which conducted also research in variable stars. Later, at the beginning of 60-th, an astronomical Observatory at the Chisinau State University named after Lenin (actually: the State University of Moldova), placed in Lozovo-Ciuciuleni villages was open, which were coordinated by Odessa State University (Prof. V.P. Tsesevich) and the Astrosovet of the USSR. Two main groups worked in this area: first conducted by V. Grigorevskij (till 1971) and second conducted by L.I. Shakun (till 1988), both graduated from Odessa State University. Besides this research areas another astronomical observations were made: Comets observations, astroclimate and atmospheric optics in collaboration with the Institute of the Atmospheric optics of the Siberian branch of the USSR (V. Chernobai, I. Nacu, C. Usov and A.F. Poiata). Comets observations were also made since 1988 by D. I. Gorodetskij which came to Chisinau from Alma-Ata and collaborated with Ukrainean astronomers conducted by K.I. Churyumov. Another part of space research was made at the State University of Tiraspol since the beggining of 70-th by a group of teaching staff of the Tiraspol State Pedagogical University: M.D. Polanuer, V.S. Sholokhov. No a collaboration between Moldovan astronomers and Transdniestrian ones actually exist due to War in Transdniestria in 1992. An important area of research concerned the Radiophysics of the Ionosphere, which was conducted in Beltsy at the Beltsy State Pedagogical Institute by a group of teaching staff of the University since the beginning of 70-th: N. D. Filip, E

  11. Use of Metallic Endosseous Implants as a Tooth Substitute.

    DTIC Science & Technology

    1979-06-01

    exposed in the oral cavity and placed in function with the opposing dentition iBACKGROUND The development of a dental implant that will serve as a...single tooth replacement. MATERIALS AND METHODS: HUMAN STUDY (SINGLE TOOTH REPLACEMENT) Volunteer patients were selected who had a full dentition ...the crown was cemented to the implant and placed in function with the opposing dentition . All crowns were cerauco crowns (porcelain fused to gold). The

  12. Effects of in-office tooth whiteners on hardness of tooth-colored restoratives.

    PubMed

    Yap, A U J; Wattanapayungkul, P

    2002-01-01

    This study investigated the effects of in-office tooth whiteners on the hardness of hybrid (Spectrum TPH), polyacid-modified (Dyract AP), PRG (Reactmer) composites and a resin-modified glass ionomer cement (Fuji II LC). Twenty-seven specimens of each material were fabricated, randomly divided into three groups of nine and treated as follows--Group 1: stored in distilled water at 37 degrees C for three weeks (control); Group 2: treated with carbamide peroxide (Opalescence Quick) for 30 minutes/week for three weeks; Group 3: treated with 35% hydrogen peroxide power bleach (Opalescence Xtra) for 30 minutes/week for three weeks. For Groups 2 and 3, specimens were stored in distilled water at 37 degrees C during the hiatus periods. The treated specimens were subsequently subjected to microhardness testing (load = 500gf; dwell time = 15 seconds). Results were analyzed using ANOVA/Scheffe's test (p<0.05). For all treatment groups, Spectrum was significantly harder than the other materials and Reactmer was significantly harder than Dyract and Fuji II LC. The effects of in-office tooth whiteners on microhardness were material-dependent. No significant difference in hardness was observed between treatment groups for Dyract and Reactmer. For Spectrum and Fuji II LC, specimens treated with Opalescence Quick were significantly harder than those treated with Opalescence Xtra. No significant difference in hardness was observed between the control and bleached groups for all materials. The hardness of resin-modified glass-ionomer cements, hybrid, polyacid-modified and PRG composites is therefore not significantly affected by the use of 35% carbamide peroxide and 35% hydrogen peroxide in-office tooth whiteners.

  13. An automatic tooth preparation technique: A preliminary study

    NASA Astrophysics Data System (ADS)

    Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

    2016-04-01

    The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05–0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

  14. Tooth structure studied using the atomic force microscope

    NASA Astrophysics Data System (ADS)

    Kasas, Sandor; Berdal, Ariane; Celio, Marco R.

    1993-06-01

    We used the atomic force microscope (AFM) to observe structure of the tooth, both rat and human. The rigidity and the surface flatness of thin sections of this mineralized tissue, allow us to attain good resolution with the AFM. As enamel contains uniquely large crystals of hydroxyapatite it can be investigated at high resolution. Tooth enamel and thin slices of undecalcified developing tooth germs from 2 - 12 day old rats were observed, embedded in acrylic resin (Lowicryl K4M). In addition, as orthophosphoric acid is widely used clinically to etch tooth enamel before restoring with composites, we studied its action at pH2 on the tooth surface during 1 hour of exposition. Hydroxyapatite crystals and collagen fibers were seen in the tooth slices observed in air, and the classical structure of the enamel was visible. The etched enamel surface under liquid, showed dramatic differences to that imaged in air. Modifications to the surface were also seen during exposure to the acid.

  15. Corticotomy-/osteotomy-assisted tooth movement microCTs differ.

    PubMed

    Lee, W; Karapetyan, G; Moats, R; Yamashita, D-D; Moon, H-B; Ferguson, D J; Yen, S

    2008-09-01

    Corticotomy-assisted and osteotomy-assisted tooth movement involves surgical incisions through the alveolar bone. To ascertain whether teeth move by distraction osteogenesis or by regional accelerated phenomenon (RAP), we randomly assigned 30 Sprague-Dawley rats to one of 5 experimental groups: corticotomy alone, corticotomy-assisted tooth movement, osteotomy alone, osteotomy-assisted tooth movement, or tooth movement alone. Each animal was imaged by microtomography immediately after surgery, after 21 days, and after 2 months. After 21 days, regional accelerated phenomenon was observed in the alveolar bone of the corticotomy-treated animals and distraction osteogenesis in the osteotomy-assisted tooth movement animals. Pixel count data were analyzed by nested ANOVA for 5 experimental groups, split-mouth controls, 3 levels along the root, and 5 sites per level. The most demineralized sites after 21 days differed for each of the experimental groups. Our study indicates that osteotomies and corticotomies induce different alveolar bone reactions, which can be exploited for tooth movement.

  16. An automatic tooth preparation technique: A preliminary study

    PubMed Central

    Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

    2016-01-01

    The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05–0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique. PMID:27125874

  17. An automatic tooth preparation technique: A preliminary study.

    PubMed

    Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

    2016-04-29

    The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05-0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

  18. Pain fiber anesthetic reduces brainstem Fos after tooth extraction.

    PubMed

    Badral, B; Davies, A J; Kim, Y H; Ahn, J S; Hong, S D; Chung, G; Kim, J S; Oh, S B

    2013-11-01

    We recently demonstrated that pain-sensing neurons in the trigeminal system can be selectively anesthetized by co-application of QX-314 with the TRPV1 receptor agonist, capsaicin (QX cocktail). Here we examined whether this new anesthetic strategy can block the neuronal changes in the brainstem following molar tooth extraction in the rat. Adult male Sprague-Dawley rats received infiltration injection of anesthetic 10 min prior to lower molar tooth extraction. Neuronal activation was determined by immunohistochemistry for the proto-oncogene protein c-Fos in transverse sections of the trigeminal subnucleus caudalis (Sp5C). After tooth extraction, c-Fos-like immunoreactivity (Fos-LI) detected in the dorsomedial region of bilateral Sp5C was highest at 2 hrs (p < .01 vs. naïve ipsilateral) and declined to pre-injury levels by 8 hrs. Pre-administration of the QX cocktail significantly reduced to sham levels Fos-LI examined 2 hrs after tooth extraction; reduced Fos-LI was also observed with the conventional local anesthetic lidocaine. Pulpal anesthesia by infiltration injection was confirmed by inhibition of the jaw-opening reflex in response to electrical tooth pulp stimulation. Our results suggest that the QX cocktail anesthetic is effective in reducing neuronal activation following tooth extraction. Thus, a selective pain fiber 'nociceptive anesthetic' strategy may provide an effective local anesthetic option for dental patients in the clinic.

  19. Tooth anatomy risk factors influencing root canal working length accessibility

    PubMed Central

    Tang, Lu; Sun, Tuo-qi; Gao, Xiao-jie; Zhou, Xue-dong; Huang, Ding-ming

    2011-01-01

    The aim of this study was to analyze the specific influence of root canal anatomy on the accessibility of working length during root canal therapy. Four hundred seventy-six root canal therapy cases (amounting to a total of 1 005 root canals) were examined. The anatomy risk factors assessed in each case included: tooth type (tooth location), root canal curvature, and root canal calcification, as well as endodontic retreatment. The investigation examined the correlation between each of these anatomic factors and the working length, with statistical analysis consisting of Chi-square tests and multiple logistic regression analysis. In an independent factor analysis, tooth type (tooth location), root canal curvature, canal calcification, and endodontic retreatment were determined to be the primary risk factors. In a multiple-factor regression model, root curvature and canal calcification were found to most significantly influence root canal working length accessibility (P<0.05). Root canal anatomy increases the difficulty of root canal preparation. Appropriate consideration of tooth anatomy will assist in accurate determination of preparation difficulty before instrumentation. This study alerts clinical therapists to anatomical factors influencing the working length accessibility, and allows for a direct estimate of success rate given in situ measurements of tooth factors during the root canal treatment procedure. PMID:21789962

  20. Personalized Orthodontic Accurate Tooth Arrangement System with Complete Teeth Model.

    PubMed

    Cheng, Cheng; Cheng, Xiaosheng; Dai, Ning; Liu, Yi; Fan, Qilei; Hou, Yulin; Jiang, Xiaotong

    2015-09-01

    The accuracy, validity and lack of relation information between dental root and jaw in tooth arrangement are key problems in tooth arrangement technology. This paper aims to describe a newly developed virtual, personalized and accurate tooth arrangement system based on complete information about dental root and skull. Firstly, a feature constraint database of a 3D teeth model is established. Secondly, for computed simulation of tooth movement, the reference planes and lines are defined by the anatomical reference points. The matching mathematical model of teeth pattern and the principle of the specific pose transformation of rigid body are fully utilized. The relation of position between dental root and alveolar bone is considered during the design process. Finally, the relative pose relationships among various teeth are optimized using the object mover, and a personalized therapeutic schedule is formulated. Experimental results show that the virtual tooth arrangement system can arrange abnormal teeth very well and is sufficiently flexible. The relation of position between root and jaw is favorable. This newly developed system is characterized by high-speed processing and quantitative evaluation of the amount of 3D movement of an individual tooth.

  1. The effect of motor vehicle airbag deployment on tooth surfaces.

    PubMed

    Ashar, A; James, H; Higgins, D; Kaidonis, J; Anderson, R W G

    2009-12-01

    Motor vehicle airbag technology is directed at the reduction of injury to drivers and passengers however a number of researchers have reported cases of injuries caused by airbags. Injuries to tooth surfaces, particularly tooth wear following the deployment of motor vehicle airbags, have never been studied. A review of the literature and clinical experience does not suggest tooth enamel abrasion to be a likely outcome following airbag deployment. This in vitro pilot study was conducted to assess the effect on tooth surfaces following the deployment of motor vehicle airbags, and in particular to attempt to reproduce the injuries claimed in a case report published in the Journal of Forensic Odonto- Stomatology in December 2007. A sample of extracted upper anterior teeth (n = 20) were analyzed using unaided visual observation, photographic and microscopic observation pre- and post- airbag deployment. Teeth were mounted on a fabricated head form (similar to those used in crash test dummies) using dental putty. The tests were performed using a modified airbag test rig with airbags deployed in 5 different positions relative to the head, with respect to distance and angulations. The result of the tests showed no changes to the teeth with unaided observation, macro photography or under the microscope. Tooth wear patterns described in the case report were not observed. Although accurate reproduction of an in vivo situation is not possible, this study has given some insight into the effects of motor vehicle airbag deployment, and suggests that significant tooth wear is an unlikely outcome from airbag deployment.

  2. Is there an association between skeletal asymmetry and tooth absence?

    PubMed Central

    Thiesen, Guilherme; Gribel, Bruno Frazão; Pereira, Keila Cristina Rausch; Freitas, Maria Perpetua Mota

    2016-01-01

    ABSTRACT Introduction: Facial skeletal asymmetry is commonly found in humans and its main characteristic is menton deviation. The literature suggests that occlusal and masticatory problems arising from tooth absence could be related to the development of such asymmetries. Objective: The aim of this cross-sectional study was to estimate the prevalence of mandibular skeletal asymmetries and to investigate its association with posterior tooth absences. Methods: Tomographic images of 952 individuals aged from 18 to 75 years old were used. Asymmetry was the analyzed outcome, and it was categorized into three groups according to gnathion displacement in relation to the midsagittal plane (relative symmetry, moderate asymmetry, and severe asymmetry). Patients were sorted by the presence of all posterior teeth, unilateral posterior tooth absence, or bilateral posterior tooth absence. Chi-square test with a significance level of 5% was used to verify the association between posterior tooth absence and asymmetry. Results: Results show relative symmetry present in 55.3% of the sample, as well as the prevalence of 27.3% for moderate mandibular asymmetry and 17.4% for severe asymmetry. Moderate and severe mandibular asymmetries occurred in a higher proportion in patients with unilateral posterior tooth absence. However, there was no statistically significant difference between the analyzed groups (p = 0.691). Conclusions: In this study, mandibular asymmetries did not present any association with the absence of teeth on the posterior area of the arch. PMID:27653267

  3. Dynamic measurements of gear tooth friction and load

    NASA Technical Reports Server (NTRS)

    Rebbechi, Brian; Oswald, Fred B.; Townsend, Dennis P.

    1991-01-01

    As part of a program to study fundamental mechanisms of gear noise, static and dynamic gear tooth strain measurements were made on the NASA gear-noise rig. Tooth-fillet strains from low-contact ratio-spur gears were recorded for 28 operating conditions. A method is introduced whereby strain gage measurements taken from both the tension and compression sides of a gear tooth can be transformed into the normal and frictional loads on the tooth. This technique was applied to both the static and dynamic strain data. The static case results showed close agreement with expected results. For the dynamic case, the normal-force computation produced very good results, but the friction results, although promising, were not as accurate. Tooth sliding friction strongly affected the signal from the strain gage on the tensionside of the tooth. The compression gage was affected by friction to a much lesser degree. The potential of the method to measure friction force was demonstrated, but further refinement will be required before this technique can be used to measure friction forces dynamically with an acceptable degree of accuracy.

  4. Ecological Resilience and Resistance in the Hyper Diverse Forests on the Eastern Andean Flank (Mera, Ecuador)

    NASA Astrophysics Data System (ADS)

    Keen, H. F.; Gosling, W. D.; Montoya, E.; Sherlock, S.; Mothes, P. A.

    2014-12-01

    Today the Neotropics contain some of the world's most biodiverse and threatened ecosystems. Sediments obtained from two radiocarbon infinite (>48,000 years) stratigraphic sections on the eastern Andean flank, provide new insight into the relationship between biodiversity and disturbance during the Pleistocene (~200,000 years). Pollen analysis of modern and fossil material indicates that hyper diverse forest vegetation has been a feature of the Andean flank landscape for 100,000 years (pollen richness: modern = 44, fossil = 48). Correlation of past vegetation with disturbance events (volcanic and fluvial) indicates the response of hyper-diverse forest to past landscape scale change. Pollen records from near Mera (01°27 S, 78°06 W; 1117 m asl) indicate two major changes in the pollen assemblage, with forest communities dominated by: i) Hedyosmum-Alnus-Ilex, and ii) Combretaceae-Melastomataceae-Myrtaceae. These two pollen assemblages most closely resemble modern vegetation cloud forest (2500-3400m asl) and lower montane rain forest (700-2499 m asl) respectively. Sedimentary evidence suggests that at least 21 volcanic events and three changes in the local fluvial regime perturbed the regional landscape during the period of deposition. However, there is no evidence for volcanic or fluvial disturbance events causing a persistent change in vegetation community. Volcanic events (tephra deposits) are associated with increased fire (charcoal particles), and changes in vegetation (pollen grains); however, within ~50cm of sediment accumulation above each tephra, pollen assemblages revert to pre-deposition compositions. Increased fluvial influence (gravel deposits) is associated with elevated input of pollen from taxa today found at higher elevations (Podocarpus-Celtis). The input of high elevation taxa concomitant with fluvial deposits is most likely indicative of an increase in long-distance transport of pollen along water courses originating in the Andes. Our data indicate

  5. Distinct sources of particles near the cusp and the dusk flank of the magnetosphere

    NASA Astrophysics Data System (ADS)

    Escoubet, C. P.; Grison, B.; Berchem, J.; Trattner, K. J.; Lavraud, B.; Pitout, F.; Soucek, J.; Richard, R. L.; Laakso, H. E.; Masson, A.; Dunlop, M.; Dandouras, I. S.; Rème, H.; Fazakerley, A. N.; Daly, P. W.

    2015-12-01

    At the magnetopause, the location of the magnetic reconnection sites depends on the orientation of the interplanetary magnetic field (IMF) in the solar wind: on the dayside magnetosphere for an IMF southward, on the lobes for an IMF northward and on the flanks for an IMF in the East-West direction. Since most of observations of reconnection events have sampled a limited region of space simultaneously it is still not yet know if the reconnection line is extended over large regions of the magnetosphere or if is patchy and made of many reconnection lines. We report a Cluster crossing on 5 January 2002 near the exterior cusp on the southern dusk side where we observe multiple sources of reconnection/injections. The IMF was mainly azimuthal (IMF-By around -5 nT), the solar wind speed lower than usual around 280 km/s with the density of order 5 cm-3. The four Cluster spacecraft had an elongated configuration near the magnetopause. C4 was the first spacecraft to enter the cusp around 19:52:04 UT, followed by C2 at 19:52:35 UT, C1 at 19:54:24 UT and C3 at 20:13:15 UT. C4 and C1 observed two ion energy dispersions at 20:10 UT and 20:40 UT and C3 at 20:35 UT and 21:15 UT. Using the time of flight technique on the upgoing and downgoing ions, which leads to energy dispersions, we obtain distances of the ion sources between 14 and 20 RE from the spacecraft. The slope of the ion energy dispersions confirmed these distances. Using Tsyganenko model, we find that these sources are located on the dusk flank, past the terminator. The first injection by C3 is seen at approximately the same time as the 2nd injection on C1 but their sources at the magnetopause were separated by more than 7 RE. This would imply that two distinct sources were active at the same time on the dusk flank of the magnetosphere. In addition, a flow reversal was observed at the magnetopause on C4 which would be an indication that reconnection is also taking place near the exterior cusp quasi-simultaneously. A

  6. Recurrent large-scale landsliding on the west flank of La Palma, Canary Islands

    NASA Astrophysics Data System (ADS)

    Urgeles, Roger; Masson, Douglas G.; Canals, Miquel; Watts, Anthony B.; Le Bas, Tim

    1999-11-01

    A large area of debris avalanche deposits has been discovered on the western submarine flanks of the island of La Palma. Multibeam bathymetry and its derivative backscatter data, Towed Ocean Bottom Instrument (TOBI) sidescan sonar images, and 3.5 kHz and airgun seismic reflection data have been used to identify at least two, and possibly as many as four, major landslide events. The youngest of the events, the Cumbre Nueva Debris Avalanche, extends onshore into the valleys bounded by the Caldera de Taburiente and Cumbre Nueva Ridge, which mark the degraded collapse scars. Radiometric dating of the volcanic flows in the headwall indicate an age of between 536 and 125 ka for this landslide. The debris avalanche covers an area of 780 km2, has a maximum thickness of 500 m, and has an estimated volume of 95 km3. Older deposits, collectively referred to as the Playa de la Veta Debris Avalanche Complex, are probably, as the name indicates, an amalgamation of at least two or three events rather than the result of a single catastrophic failure. The Playa de la Veta Debris Avalanche Complex is associated onshore with an unconformity dated as late Matuyama (1 Ma to 800 ka). It covers an area of 1200 km2, has a maximum thickness of 1300 m, and may represent a total volume of up to 650 km3. The greater thicknesses and limited areas occupied by debris avalanches on the western flank of La Palma, compared to other landslides in the Canary Archipelago, suggest that the La Palma landslide masses have relatively low mobility. The different debris avalanche lobes formed by each landslide event are separated by channels 2-2.5 km wide. The clear relationship between channel position and the boundaries of each debris avalanche lobe indicates that debris avalanches control later channel formation and pathways. The relief of the submarine flanks of the La Palma volcanoes, in the areas of island slope unaffected by landslides, is mainly the result of constructional volcanic processes

  7. [Pathology of Charcot-Marie-Tooth Disease].

    PubMed

    Oka, Nobuyuki

    2016-01-01

    Although genetic testing is available, nerve biopsy is useful in selected patients for the diagnosis of Charcot-Marie-Tooth disease (CMT). These are sporadic cases of hereditary neuropathy, or familial cases in which genetic testing is negative. CMT is caused by mutations of various genes. The pathological features of CMT have mostly been investigated using nerve biopsy, which may shed light on the presumed functions of mutated gene products. PMP22 duplication in CMT1A induces numerous large onion bulb lesions (OB). Compared to chronic inflammatory demyelinating polyradiculoneuropathy, the differential features of CMT1A are patchy distribution of OB and non-inflammatory lesions. CMT1B also manifests as OB, but presents abnormal compaction of myelin sheaths caused by uncompacted myelin or excessive myelin folding. CMT2 includes axonal neuropathies and many causative genes have been found. CMT2A (MFN2 mutation) shows abnormal mitochondria with a spherical morphology instead of tubular in the longitudinal direction. CMT4 consists of autosomal recessive forms with demyelinating pathology. Most subtypes have mutations of genes relating to myelin maintenance, and pathologically, they show abnormal folding of the myelin structure.

  8. Canine tooth size variability in primates.

    PubMed

    Beauchamp, G

    1989-01-01

    I present an analysis of canine tooth size variability in male and female primates. The coefficient of variation (CV = SD X 100/mean) as an index of canine size variability proved to be dependent on mean canine size in males and, to a lower extent, in females. Therefore, variability tends to increase with increasing values of mean canine size. Using residuals from the regression of log SD on log mean canine size in male and female primates, I analysed the contribution of diet, habitat and mating system to canine size variability. Habitat and mating system are known to influence to a certain extent the degree of sexual dimorphism in canine size. Given the well-known relationship between sexual dimorphism and phenotypic variability, it was suggested that these factors might influence variability in canine size. Everything else being equal, males of polygynous species are characterized by more variable canine sizes than males of monogamous species. Habitat and diet did not contribute to the level of variability observed in either males or females. It is proposed that a high level of variability in canine size may be related to the likelihood that enlarged canines evolved as a result of male-male competition for mates in polygynous species.

  9. Biomaterials in Tooth Tissue Engineering: A Review

    PubMed Central

    Sharma, Sarang; Srivastava, Dhirendra; Grover, Shibani; Sharma, Vivek

    2014-01-01

    Biomaterials play a crucial role in the field of tissue engineering. They are utilized for fabricating frameworks known as scaffolds, matrices or constructs which are interconnected porous structures that establish a cellular microenvironment required for optimal tissue regeneration. Several natural and synthetic biomaterials have been utilized for fabrication of tissue engineering scaffolds. Amongst different biomaterials, polymers are the most extensively experimented and employed materials. They can be tailored to provide good interconnected porosity, large surface area, adequate mechanical strengths, varying surface characterization and different geometries required for tissue regeneration. A single type of material may however not meet all the requirements. Selection of two or more biomaterials, optimization of their physical, chemical and mechanical properties and advanced fabrication techniques are required to obtain scaffold designs intended for their final application. Current focus is aimed at designing biomaterials such that they will replicate the local extra cellular environment of the native organ and enable cell-cell and cell-scaffold interactions at micro level required for functional tissue regeneration. This article provides an insight into the different biomaterials available and the emerging use of nano engineering principles for the construction of bioactive scaffolds in tooth regeneration. PMID:24596804

  10. Mechanics of microwear traces in tooth enamel.

    PubMed

    Borrero-Lopez, Oscar; Pajares, Antonia; Constantino, Paul J; Lawn, Brian R

    2015-03-01

    It is hypothesized that microwear traces in natural tooth enamel can be simulated and quantified using microindentation mechanics. Microcontacts associated with particulates in the oral wear medium are modeled as sharp indenters with fixed semi-apical angle. Distinction is made between markings from static contacts (pits) and translational contacts (scratches). Relations for the forces required to produce contacts of given dimensions are derived, with particle angularity and compliance specifically taken into account so as to distinguish between different abrasives in food sources. Images of patterns made on human enamel with sharp indenters in axial and sliding loading are correlated with theoretical predictions. Special attention is given to threshold conditions for transition from a microplasticity to a microcracking mode, corresponding to mild and severe wear domains. It is demonstrated that the typical microwear trace is generated at loads on the order of 1N - i.e. much less than the forces exerted in normal biting - attesting to the susceptibility of teeth to wear in everyday mastication, especially in diets with sharp, hard and large inclusive intrinsic or extraneous particulates.

  11. Computerized inspection of gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Litvin, Faydor L.; Yi, Zhang; Kieffer, Jonathan; Handschuh, Robert F.; Coy, John J.

    1989-01-01

    An approach is proposed that uses coordinate measurements of the real surface of spiral bevel gears to determine the actual machine tool setting applied during the gear manufacturing process. The deviations of the real surface from the theoretical one are also determined. Adjustments are then applied by machine tool corrections to minimize these surface deviations. This is accomplished by representing the real surface analytically in the same Gaussian coordinates as the theoretical surface.

  12. Flanking sequences modulate diepoxide and mustard cross-linking efficiencies at the 5'-GNC site.

    PubMed

    Sawyer, Gregory A; Frederick, Elizabeth D; Millard, Julie T

    2004-08-01

    Diepoxybutane, diepoxyoctane, and mechlorethamine are cytotoxic agents that induce interstrand cross-links between the N7 positions of deoxyguanosine residues on opposite strands of the DNA duplex preferentially at 5'-GNC sequences. We have systematically varied the identity of either the base 5' to the cross-linked deoxyguanosine residues or the intervening base pair to determine flanking sequence effects on cross-linking efficiency. We used synthetic DNA oligomers containing four 5'-N(1)GN(2)C sites that varied either N(1) or N(2). Interstrand cross-links were purified through denaturing polyacrylamide gel electrophoresis and then subjected to piperidine cleavage. The amount of cleavage at each deoxyguanosine residue, representative of cross-linking efficiency at that site, was determined by sequencing gel analysis. Our data suggest that cross-linking efficiency varies with the identity of N(1) similarly (purines > pyrimidines) for diepoxybutane, diepoxyoctane, and mechlorethamine but that the effects of N(2) differ for the three compounds.

  13. Chandra X-ray Observations of Young Clusters. Volume II; Orion Flanking Fields Data

    NASA Technical Reports Server (NTRS)

    Ramirez, Solange V.; Rebull, Luisa; Stauffer, John; Strom, Stephen; Hillenbrand, Lynne; Hearty, Thomas; Kopan, Eugene L.; Pravdo, Steven; Makidon, Russell; Jones, Burton

    2004-01-01

    We present results of Chandra observations of two flanking fields (FFs) in Orion, outside the Orion Nebula Cluster (ONC). The observations were taken with the ACIS-I camera with an exposure time of about 48 ks each field. We present a catalog of 417 sources, which includes X-ray luminosity, optical and infrared photometry, and X-ray variability information. We have found 91 variable sources, 33 of which have a flarelike light curve and 11 of which have a pattern of a steady increase or decrease over a 10 hr period. The optical and infrared photometry for the stars identified as X-ray sources are consistent with most of these objects being pre-main-sequence stars with ages younger than 10 Myr. We present evidence for an age difference among the X-ray-selected samples of NGC 2264, Orion FFs, and ONC, with NGC 2264 being the oldest and ONC being the youngest.

  14. Sangre de Cristo Mountains: East flank Culebra range thrust fault and Raton basin prospects, Colorado

    SciTech Connect

    Ericson, E.K.

    1989-09-01

    Drilling in the Stonewall area west of Trinidad confirms seismic evidence of major thrust faulting displacing the surface complex a minimum of 2.5 km (1.5 mi) eastward over the west flank of the Raton basin. There is no direct evidence of this master fault where it apparently intersects the surface in the poorly exposed Pierre Shale section east of the Dakota stonewall. This mountain-to-basin relationship has been established in some of the frontal ranges to the north, but it had not been proven in this part of the Sangre de Cristo. Although commercial hydrocarbons were not found in this test, the structural information provides encouragement for exploration of hidden traps in other sectors of the mountain front.

  15. Thermochronologic constraints on Jurassic rift flank denudation in the Thiel Mountains, Antarctica

    USGS Publications Warehouse

    Fitzgerald, P.G.; Baldwin, S.L.

    2007-01-01

    The Thiel Mountains are part of the Transantarctic Mountains (TAM) and occupy a strategic position close to the East-West Antarctic boundary. They occur in a region of relatively subdued topography distal from high topography and high relief of most of the TAM adjacent to the West Antarctic rift system. Low-temperature thermochronology on samples collected from the Reed Ridge granite on the north flank of the Thiel Mountains constrain the thermal and hence tectonic history. Apatite fission track data plus thermal models indicate cooling from ca. 165-150 Ma. In conjunction with 40Ar/39Ar K-feldspar data, the results indicate cooling was due to relatively slow erosional denudation, and not thermal relaxation following Jurassic tholeiitic magmatism. Denudation was most likely associated with the formation of the Jurassic rift system across Antarctica that marked the initial breakup of Gondwana. This is the oldest episode of denudation associated with formation of the present day TAM

  16. Introns and their flanking sequences of Bombyx mori rDNA.

    PubMed Central

    Fujiwara, H; Ogura, T; Takada, N; Miyajima, N; Ishikawa, H; Maekawa, H

    1984-01-01

    We obtained two different clones (16 kb and 13 kb) of B. mori rDNA with intron sequence within the 28S-rRNA coding region. The sequence surrounding the intron was found to be highly conserved as indicated in several eukaryotes (Tetrahymena, Drosophila and Xenopus). The 28S rRNA-coding sequence of 16 kb and 13 kb clone was interrupted at precisely the same sites as those where the D. melanogaster rDNA interrupted by the type I and type II intron, respectively. The intron sequences of B. mori were different from those of D. melanogaster. In 16 kb clone, the intron was flanked by 14 bp duplication of the junction sequence, which was also present once within the 28S rRNA-coding region of rDNA without intron. This 14 bp sequence was identical with those surrounding the introns of Dipteran rDNAs. PMID:6091041

  17. The response of vegetation on the Andean flank in western Amazonia to Pleistocene climate change.

    PubMed

    Cárdenas, Macarena L; Gosling, William D; Sherlock, Sarah C; Poole, Imogen; Pennington, R Toby; Mothes, Patricia

    2011-02-25

    A reconstruction of past environmental change from Ecuador reveals the response of lower montane forest on the Andean flank in western Amazonia to glacial-interglacial global climate change. Radiometric dating of volcanic ash indicates that deposition occurred ~324,000 to 193,000 years ago during parts of Marine Isotope Stages 9, 7, and 6. Fossil pollen and wood preserved within organic sediments suggest that the composition of the forest altered radically in response to glacial-interglacial climate change. The presence of Podocarpus macrofossils ~1000 meters below the lower limit of their modern distribution indicates a relative cooling of at least 5°C during glacials and persistence of wet conditions. Interglacial deposits contain thermophilic palms suggesting warm and wet climates. Hence, global temperature change can radically alter vegetation communities and biodiversity in this region.

  18. Caustic-Side Solvent Extraction: Prediction of Cesium Extraction for Actual Wastes and Actual Waste Simulants

    SciTech Connect

    Delmau, L.H.; Haverlock, T.J.; Sloop, F.V., Jr.; Moyer, B.A.

    2003-02-01

    This report presents the work that followed the CSSX model development completed in FY2002. The developed cesium and potassium extraction model was based on extraction data obtained from simple aqueous media. It was tested to ensure the validity of the prediction for the cesium extraction from actual waste. Compositions of the actual tank waste were obtained from the Savannah River Site personnel and were used to prepare defined simulants and to predict cesium distribution ratios using the model. It was therefore possible to compare the cesium distribution ratios obtained from the actual waste, the simulant, and the predicted values. It was determined that the predicted values agree with the measured values for the simulants. Predicted values also agreed, with three exceptions, with measured values for the tank wastes. Discrepancies were attributed in part to the uncertainty in the cation/anion balance in the actual waste composition, but likely more so to the uncertainty in the potassium concentration in the waste, given the demonstrated large competing effect of this metal on cesium extraction. It was demonstrated that the upper limit for the potassium concentration in the feed ought to not exceed 0.05 M in order to maintain suitable cesium distribution ratios.

  19. Autocrine and paracrine Shh signaling are necessary for tooth morphogenesis, but not tooth replacement in snakes and lizards (Squamata).

    PubMed

    Handrigan, Gregory R; Richman, Joy M

    2010-01-01

    Here we study the role of Shh signaling in tooth morphogenesis and successional tooth initiation in snakes and lizards (Squamata). By characterizing the expression of Shh pathway receptor Ptc1 in the developing dentitions of three species (Eublepharis macularius, Python regius, and Pogona vitticeps) and by performing gain- and loss-of-function experiments, we demonstrate that Shh signaling is active in the squamate tooth bud and is required for its normal morphogenesis. Shh apparently mediates tooth morphogenesis by separate paracrine- and autocrine-mediated functions. According to this model, paracrine Shh signaling induces cell proliferation in the cervical loop, outer enamel epithelium, and dental papilla. Autocrine signaling within the stellate reticulum instead appears to regulate cell survival. By treating squamate dental explants with Hh antagonist cyclopamine, we induced tooth phenotypes that closely resemble the morphological and differentiation defects of vestigial, first-generation teeth in the bearded dragon P. vitticeps. Our finding that these vestigial teeth are deficient in epithelial Shh signaling further corroborates that Shh is needed for the normal development of teeth in snakes and lizards. Finally, in this study, we definitively refute a role for Shh signaling in successional dental lamina formation and conclude that other pathways regulate tooth replacement in squamates.

  20. RENAL RETENTION OF LIPID MICROBUBBLES: A POTENTIAL MECHANISM FOR FLANK DISCOMFORT DURING ULTRASOUND CONTRAST ADMINISTRATION

    PubMed Central

    Liu, Ya Ni; Khangura, Jaspreet; Xie, Aris; Belcik, J. Todd; Qi, Yue; Davidson, Brian P.; Zhao, Yan; Kim, Sajeevani; Inaba, Yoichi; Lindner, Jonathan R.

    2013-01-01

    Background The etiology for flank pain sometimes experienced during administration of ultrasound contrast agents is unknown. We investigated whether microbubble ultrasound contrast agents are retained within the renal microcirculation which could lead to either flow disturbance or local release of vasoactive and pain mediators downstream from complement activation. Methods Retention of lipid-shelled microbubbles in the renal microcirculation of mice was assessed by confocal fluorescent microscopy and contrast-enhanced ultrasound (CEU) imaging with dose-escalating intravenous injection. Studies were performed with size-segregated microbubbles to investigate physical entrapment, after glycocalyx degradation, and in wild-type and C3-deficient mice to investigate complement-mediated retention. Urinary bradykinin was measured before and after microbubbles. Renal CEU in human subjects (n=13) was performed 7–10 min after completion of lipid microbubble administration. Results In both mice and humans, microbubble retention was detected in the renal cortex by persistent CEU signal enhancement. Microbubble retention in mice was linearly related to dose and occurred almost exclusively in cortical glomerular microvessels. Microbubble retention did not affect microsphere-derived renal blood flow. Microbubble retention was not influenced by glycocalyx degradation nor by microbubble size, thereby excluding lodging, but was reduced by 90% (p<0.01) in C3-deficient mice. Urinary bradykinin increased by 65% five minutes after microbubble injection. Conclusion Lipid-shelled microbubbles are retained in the renal cortex due to complement-mediated interactions with glomerular microvascular endothelium. Microbubble retention does not adversely affect renal perfusion but does generate complement-related intermediates that are known to mediate nociception and could be responsible for flank pain. PMID:24035699

  1. HSDP II Drill Core: Preliminary Rock Strength Results and Implications to Flank Stability, Mauna Kea Volcano

    NASA Astrophysics Data System (ADS)

    Thompson, N.; Watters, R. J.; Schiffman, P.

    2004-12-01

    Selected portions of the 3-km HSDP II core were tested to provide unconfined rock strength data from hyaloclastite alteration zones and pillow lavas. Though the drilling project was not originally intended for strength purpose, it is believed the core can provide unique rock strength insights into the flank stability of the Hawaiian Islands. The testing showed that very weak rock exists in the hyaloclastite abundant zones in the lower 2-km of the core with strength dependent on the degree of consolidation and type of alteration. Walton and Schiffman identified three zones of alteration, an upper incipient alteration zone (1080-1335m), a smectitic zone (1405-1573m) and a lower palagonitic zone from about 1573 m to the base of the core. These three zones were sampled and tested together with pillow lava horizons for comparison. Traditional cylindrical core was not available as a consequence of the entire core having been split lengthwise for archival purposes. Hence, point load strength testing was utilized which provides the unconfined compressive strength on irregular shaped samples. The lowest unconfined strengths were recorded from incipient alteration zones with a mean value of 9.5 MPa. Smectitic alteration zones yielded mean values of 16.4 MPa, with the highest measured alteration strengths from the palagonite zones with a mean value of 32.1 MPa. As anticipated, the highest strengths were from essentially unaltered lavas with a mean value of 173 MPa. Strength variations of between one to two orders of magnitude were identified in comparing the submarine hyaloclastite with the intercalated submarine lavas. The weakest zones within the hyaloclastites may provide horizons for assisting flank collapse by serving as potential thrust zones and landslide surfaces.

  2. Temperature Estimates for the Slow Slip Region on the Decollement Underlying the South Flank of Kilauea

    NASA Astrophysics Data System (ADS)

    Spinelli, G. A.

    2013-12-01

    Eleven slow slip events on the decollement beneath the south flank of Kilauea volcano have been documented geodetically since 1998 (Brooks et al., 2006; Montgomery-Brown et al., 2009; 2013). Tectonic tremor has not been observed associated with these events, in contrast to most slow slip events in subduction zones (Montgomery-Brown et al., 2013). The slow slip events occur on the decollement at ~8 km depth, and updip of the 'normal' earthquakes on the fault. Constraining temperatures on Kilauea's decollement allows comparisons between its slow slip events and those in subduction zones. Kilauea's slow slip events (~8 km depth) are significantly shallower than most subduction zone slow slip events. I estimate temperatures in a 2-D cross-section through the south flank of Kilauea by combining methods used in subduction zone thermal models (Wang et al., 1995) with elements of intrusion cooling models of volcanoes (e.g., Civetta et al., 2004). Temperatures in the cross-section are controlled by: 1) heat sources from friction on the decollement, radioactive decay, and volcanic activity, and 2) heat transport by conduction, advection of the volcanic pile to the southeast over the underlying oceanic lithosphere, and advective heat transport associated with groundwater flow. I examine the thermal effects of a range of effective friction coefficients on the fault from 0-0.2. I determine the potential effects of groundwater flow in the upper ~1-2 km of the onshore and near-offshore volcanic pile (e.g., Kauahikaua, 1993; Buttner and Huenges, 2003) on decollement temperatures. Finally, I examine how heat input from Kilauea volcano may result in higher decollement temperatures than at the same depth on plate boundary faults in subduction zones.

  3. Hazard Zonation at Mount Adams, Washington based on Edifice and Flank Stability Modeling

    NASA Astrophysics Data System (ADS)

    Bowman, S. D.; Watters, R. J.

    2002-12-01

    Collapse of the edifice [summit] and flanks of volcanoes is common worldwide, including the Cascade Range. Many of these failures have transformed into devastating debris flows that may travel hundreds of miles from their source area and have killed or injured hundreds of thousands of people. Despite the danger posed by these failures and the incipient debris flows, limited geotechnical data exists to quantify hazards from edifice and flank failure. Recent field work and investigation at Mount Adams, Washington focused on developing and refining a methodology for characterizing volcanic stability for geologic hazard analysis. This methodology may be applied at other volcanoes worldwide. Geotechnical data, including discontinuity and strength characteristics, Rock Mass Rating (RMR), point load index, direct shear, unconfined compression, and triaxial data were used to identify sectors based upon common geotechnical and geologic characteristics. The geotechnical information collected at Mount Adams adds to the limited data available worldwide and provides general strength ranges for use in initial stability studies at other volcanoes. In addition, a new point load index device was developed for use at high elevation and remote locations. Stability of each identified sector was analyzed using limit equilibrium methods, based upon collected geotechnical and geologic data. Three previous failures were backanalysed to determine strength characteristics at the time of failure. Areas of immediate instability include The Castle and the Avalanche Glacier Headwall. Backanalysis of the Trout Lake Mudflow, which formed the Avalanche Glacier Headwall, suggests a seismic or eruption triggering mechanism. Stability analysis resulted in a failure hazard map quantifying the hazard in each sector from slope failure. This hazard map in combination with other data may be used by agencies and organizations involved in land-use planning in the Mount Adams area to protect lives and

  4. Airborne sound insulation evaluation and flanking path prediction of coupled room

    NASA Astrophysics Data System (ADS)

    Tassia, R. D.; Asmoro, W. A.; Arifianto, D.

    2016-11-01

    One of the parameters to review the acoustic comfort is based on the value of the insulation partition in the classroom. The insulation value can be expressed by the sound transmission loss which converted into a single value as weighted sound reduction index (Rw, DnTw) and also have an additional sound correction factor in low frequency (C, Ctr) .In this study, the measurements were performed in two positions at each point using BSWA microphone and dodecahedron speaker as the sound source. The results of field measurements indicate the acoustic insulation values (DnT w + C) is 19.6 dB. It is noted that the partition wall not according to the standard which the DnTw + C> 51 dB. Hence the partition wall need to be redesign to improve acoustic insulation in the classroom. The design used gypsum board, plasterboard, cement board, and PVC as the replacement material. Based on the results, all the material is simulated in accordance with established standards. Best insulation is cement board with the insulation value is 69dB, the thickness of 12.5 mm on each side and the absorber material is 50 mm. Many factors lead to increase the value of acoustic insulation, such as the thickness of the panel, the addition of absorber material, density, and Poisson's ratio of a material. The prediction of flanking path can be estimated from noise reduction values at each measurement point in the class room. Based on data obtained, there is no significant change in noise reduction from each point so that the pathway of flanking is not affect the sound transmission in the classroom.

  5. Whale phylogeny and rapid radiation events revealed using novel retroposed elements and their flanking sequences

    PubMed Central

    2011-01-01

    Background A diversity of hypotheses have been proposed based on both morphological and molecular data to reveal phylogenetic relationships within the order Cetacea (dolphins, porpoises, and whales), and great progress has been made in the past two decades. However, there is still some controversy concerning relationships among certain cetacean taxa such as river dolphins and delphinoid species, which needs to be further addressed with more markers in an effort to address unresolved portions of the phylogeny. Results An analysis of additional SINE insertions and SINE-flanking sequences supported the monophyly of the order Cetacea as well as Odontocete, Delphinoidea (Delphinidae + Phocoenidae + Mondontidae), and Delphinidae. A sister relationship between Delphinidae and Phocoenidae + Mondontidae was supported, and members of classical river dolphins and the genera Tursiops and Stenella were found to be paraphyletic. Estimates of divergence times revealed rapid divergences of basal Odontocete lineages in the Oligocene and Early Miocene, and a recent rapid diversification of Delphinidae in the Middle-Late Miocene and Pliocene within a narrow time frame. Conclusions Several novel SINEs were found to differentiate Delphinidae from the other two families (Monodontidae and Phocoenidae), whereas the sister grouping of the latter two families with exclusion of Delphinidae was further revealed using the SINE-flanking sequences. Interestingly, some anomalous PCR amplification patterns of SINE insertions were detected, which can be explained as the result of potential ancestral SINE polymorphisms and incomplete lineage sorting. Although a few loci were potentially anomalous, this study demonstrated that the SINE-based approach is a powerful tool in phylogenetic studies. Identifying additional SINE elements that resolve the relationships in the superfamily Delphinoidea and family Delphinidae will be important steps forward in completely resolving cetacean phylogenetic

  6. [Sequence characterization of the 5'-Flanking region of the GHR gene in Tibetan sheep].

    PubMed

    Ma, Zhi-Jie; Wei, Ya-Ping; Zhong, Jin-Cheng; Chen, Zhi-Hua; Lu, Hong; Tong, Zi-Bao

    2007-08-01

    The 5'-Flanking sequence (including the P1 promotor and exon 1A) of the GHR gene in Oura-type Tibetan sheep (O. aries) was cloned by T-A method and sequenced (GenBank accession No. EF116490). Characterization and comparison of this sequence with mouflons (O. musimon), goat (C. hircus), cattle (B. taurus) and European bison (B. bonasus) orthologues were also conducted. Results showed that: 1) The 5'-flanking region contained many potential transcriptional factor binding sites such as those for C/EBPb, C/EBP, SP1, Cap, USF, HFH-2, HNF-3b, and Oct-1, which might have an important effect on transcription activation and regulation as well as tissue-specific expression. The rate of repetitive sequences was 2.55% and no SINEs, LINEs, LTR anti-transcription elements or DNA transposon elements were found, although one (TG)11 microsatellite was found. 2) In the P1 promotor region, sequence homology between the Tibetan sheep and mouflon, goat, cattle and European bison was 99.7%, 94.2%, 85.9% and 86.5%, respectively, while that for exon 1A was 99.0%, 97.0%, 92.7% and 94.6%, respectively. 3) The molecular phylogenetic tree among these species, constructed by the neighborhood joining method based on the sequences of no-coding region of the GHR genes, placed the two Bovinae species on one branch and the three Caprinae species on the other. Tibetan sheep and mouflons were joined first, followed by the goat, and then the Bovinae species, including the cattle and European bison. This result of phylogenetic clustering was not only identical to the taxonomy, but also to the phylogenetic clustering using the mitochondrial DNA of these species.

  7. The interaction of polyglutamine peptides with lipid membranes is regulated by flanking sequences associated with huntingtin.

    PubMed

    Burke, Kathleen A; Kauffman, Karlina J; Umbaugh, C Samuel; Frey, Shelli L; Legleiter, Justin

    2013-05-24

    Huntington disease (HD) is caused by an expanded polyglutamine (poly(Q)) repeat near the N terminus of the huntingtin (htt) protein. Expanded poly(Q) facilitates formation of htt aggregates, eventually leading to deposition of cytoplasmic and intranuclear inclusion bodies containing htt. Flanking sequences directly adjacent to the poly(Q) domain, such as the first 17 amino acids on the N terminus (Nt17) and the polyproline (poly(P)) domain on the C-terminal side of the poly(Q) domain, heavily influence aggregation. Additionally, htt interacts with a variety of membraneous structures within the cell, and Nt17 is implicated in lipid binding. To investigate the interaction between htt exon1 and lipid membranes, a combination of in situ atomic force microscopy, Langmuir trough techniques, and vesicle permeability assays were used to directly monitor the interaction of a variety of synthetic poly(Q) peptides with different combinations of flanking sequences (KK-Q35-KK, KK-Q35-P10-KK, Nt17-Q35-KK, and Nt17-Q35-P10-KK) on model membranes and surfaces. Each peptide aggregated on mica, predominately forming extended, fibrillar aggregates. In contrast, poly(Q) peptides that lacked the Nt17 domain did not appreciably aggregate on or insert into lipid membranes. Nt17 facilitated the interaction of peptides with lipid surfaces, whereas the poly(P) region enhanced this interaction. The aggregation of Nt17-Q35-P10-KK on the lipid bilayer closely resembled that of a htt exon1 construct containing 35 repeat glutamines. Collectively, this data suggests that the Nt17 domain plays a critical role in htt binding and aggregation on lipid membranes, and this lipid/htt interaction can be further modulated by the presence of the poly(P) domain.

  8. Volatile emissions from the crater and flank of Oldoinyo Lengai volcano, Tanzania

    USGS Publications Warehouse

    Koepenick, K.W.; Brantley, S.L.; Thompson, J.M.; Rowe, G.L.; Nyblade, A.A.; Moshy, C.

    1996-01-01

    As a comparison to airborne infrared (IR) flux measurements, ground-based sampling of fumarole and soil gases was used to characterize the quiescent degassing of CO2 from Oldoinyo Lengai volcano. Aerial and ground-based measurements are in good agreement: ???75% of the aerially measured CO2 flux at Lengai (0.05-0.06 ?? 1012 mol yr-1 or 6000-7200 tonnes CO2 d-1) can be attributed to seven large crater vents. In contrast to Etna and Vulcano Island, where 15-50% of the total CO2 flux emanates diffusely through the volcanic flanks, diffuse emissions were measured only within 500 m of the crater rim at Lengai, contributing < 2% of the total flux. The lack of extensive flank emissions may reflect the dimensions of the magma chamber and/or the lack of a shallow fluid flow system. Thermodynamic restoration of fumarole analyses shows that gases are the most CO2-rich and H2O-poor reported for any volcano, containing 64-74% CO2, 24-34% H2O, 0.88-1.0% H2, 0.1-0.4% CO and < 0.1% H2S, HCl, HF, and CH4. Volatile emissions of S, Cl, and F at Oldoiyno Lengai are estimated as 4.5, 1.5, and 1.0 ?? 107 mol yr-1, respectively. Accuracy of the airborne technique was also assessed by measuring the C emission rate from a coal-burning power plant. CO2 fluxes were measured within ??10% near the plant; however, poor resolution at increased distances caused an underestimation of the flux by a factor of 2. The relatively large CO2 fluxes measured for alkaline volcanoes such as Oldoinyo Lengai or Etna may indicate that midplate volcanoes represent a large, yet relatively unknown, natural source of CO2.

  9. Shading of ceramic crowns using digital tooth shade matching devices.

    PubMed

    Baltzer, A; Kaufmann-Jinoian, V

    2005-04-01

    In the 1990s, there was great optimism due to the development of devices for measuring tooth shade. The frequently not so simple, visual determination of the shade of a tooth was to be done with the aid of a device which recognizes the shade and describes it accurately by reference to a color chart. However, the skepticism towards such devices was also great. It is known that the color effect frequently differs strongly when comparing a tooth from the shade guide with a metal ceramic crown, despite identical shade designation. Anyone who considers visual shade determination to be inadequate and places his hopes in digital shade matching devices will be disappointed. It is the shade-generating structures of the metal ceramic and frequently of the veneer layers that turn out to be too thin which, despite correct shade selection, cause a different color perception. Such problems have been reduced decisively with the development of fracture-proof hard porcelain caps (Vita In-Ceram) with optical characteristics similar to teeth. In addition, the Vita System 3D-Master tooth shade system developed in 1998 by Vita in cooperation with Dr. Hall from Australia, leads the practitioner to a better understanding of the primary tooth shade characteristics of "brightness (value)", "color intensity (chroma)" and "color (wave length of the visible light, hue)". These two innovations allow a more accurate estimate of the basic shade of a natural tooth (reference tooth) and the imitation in the laboratory of its natural, shade-generating structures. If digital shade measurement supplements the visual shade estimate, then a further improvement can be expected--especially in the recognition of the basic shade. Qualitative descriptions of subjective shade measurement of a natural tooth and of its imitation in the dental laboratory by ceramics can be found frequently in professional journals and publications. With digital tooth shade matching devices, which apart from the color code of

  10. Cloning of flanking sequence in transgenic plants by restriction site-anchored single-primer polymerase chain reaction.

    PubMed

    Ma, J; Wang, N N; Ren, S; Fu, Y P; Lu, S; Wang, Y P; Wang, P W

    2014-12-12

    Determining the insertion position of an exogenous gene in the target plant genome is one of the main issues in the transgenic plant field. This study introduced a simple, rapid, and accurate method to clone the flanking sequences of the transgenic bar gene as the anchoring gene in the transgenic maize genome using single-primer polymerase chain reaction (PCR). This method was based on the distribution of restriction sites in the maize genome and adopted the single-primer PCR method. Cloning the flanking sequences with the restriction site-anchored single-primer PCR simplified the experimental procedures by about 70% and reduced the experimental time by more than 80%. In conclusion, the restriction site-anchored single-primer PCR was a simple, rapid method to obtain the unknown flanking sequences in the transgenic plants.

  11. Biophysical properties of regions flanking the bHLH-Zip motif in the p22 Max protein.

    PubMed

    Pursglove, Sharon E; Fladvad, Malin; Bellanda, Massimo; Moshref, Ahmad; Henriksson, Marie; Carey, Jannette; Sunnerhagen, Maria

    2004-10-22

    The Max protein is the central dimerization partner in the Myc-Max-Mad network of transcriptional regulators, and a founding structural member of the family of basic-helix-loop-helix (bHLH)-leucine zipper (Zip) proteins. Biologically important regions flanking its bHLH-Zip motif have been disordered or absent in crystal structures. The present study shows that these regions are resistant to proteolysis in both the presence and absence of DNA, and that Max dimers containing both flanking regions have significantly higher helix content as measured by circular dichroism than that predicted from the crystal structures. Nuclear magnetic resonance measurements in the absence of DNA also support the inferred structural order. Deletion of both flanking regions is required to achieve maximal DNA affinity as measured by EMSA. Thus, the previously observed functionalities of these Max regions in DNA binding, phosphorylation, and apoptosis are suggested to be linked to structural properties.

  12. Amery Ice Shelf's 'Loose Tooth' Gets Looser

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Amery Ice Shelf is an important dynamic system responsible for draining about 16% of the grounded East Antarctic ice sheet through only 2% of its coastline. Most of the mass input to the system occurs from the Lambert and several other glaciers. Mass loss from the system occurs through basal melting and iceberg calving. These images from the Multi-angle Imaging SpectroRadiometer (MISR) portray the ice shelf front on October 6, 2001 (top) and September 29, 2002 (bottom), and illustrate changes that took place over the year elapsed between the two views.

    Two longitudinal rifts, oriented roughly parallel to the direction of ice flow and measuring about 25 and 15 kilometers in length, are apparent near the seaward edge of the ice shelf. Between them, a transverse fracture extends eastward from the base of the western rift. This rift system is colloquially named the Amery 'loose tooth.' Over the course of the one-year interval between these two MISR images, the ice front has advanced approximately 1.6 - 1.7 kilometers, and the transverse fracture and a three-way fissure at the juncture of the rifts have widened. When the transverse fracture eventually reaches the eastern rift, a large iceberg (25 kilometers x 25 kilometers) will be released.

    These false-color multi-angle composites combine red-band data from MISR's 60o forward, nadir, and 60o aftward viewing cameras, displayed as red, green and blue, respectively. Different colors represent angular reflectance variations. Since generally smooth surfaces predominantly forward-scatter sunlight, these appear in shades of blue. Rough surfaces tend to backward-scatter sunlight, and these appear in shades of red or orange. Low clouds appear bright purple, since they exhibit both forward and backward-scattering. Using this technique, textural variations among ice types are revealed, and clouds can be easily distinguished from ice. Illumination conditions on the two dates are nearly identical.

    Understanding the

  13. Flanking region variation of ForenSeq™ DNA Signature Prep Kit STR and SNP loci in Yavapai Native Americans.

    PubMed

    Wendt, Frank R; King, Jonathan L; Novroski, Nicole M M; Churchill, Jennifer D; Ng, Jillian; Oldt, Robert F; McCulloh, Kelly L; Weise, Jessica A; Smith, David Glenn; Kanthaswamy, Sreetharan; Budowle, Bruce

    2017-02-27

    Massively parallel sequencing (MPS) offers advantages over current capillary electrophoresis-based analysis of short tandem repeat (STR) loci for human identification testing. In particular STR repeat motif sequence information can be obtained, thereby increasing the discrimination power of some loci. While sequence variation within the repeat region is observed relatively frequently in some of the commonly used STRs, there is an additional degree of variation found in the flanking regions adjacent to the repeat motif. Repeat motif and flanking region sequence variation have been described for major population groups, however, not for more isolated populations. Flanking region sequence variation in STR and single nucleotide polymorphism (SNP) loci in the Yavapai population was analyzed using the ForenSeq™ DNA Signature Prep Kit and STRait Razor v2s. Seven and 14 autosomal STRs and identity-informative single nucleotide polymorphisms (iiSNPs), respectively, had some degree of flanking region variation. Three and four of these identity-informative loci, respectively, showed ≥5% increase in expected heterozygosity. The combined length- and sequence-based random match probabilities (RMPs) for 27 autosomal STRs were 6.11×10(-26) and 2.79×10(-29), respectively. When combined with 94 iiSNPs (a subset of which became microhaplotypes) the combined RMP was 5.49×10(-63). Analysis of length-based and sequence-based autosomal STRs in STRUCTURE indicated that the Yavapai are most similar to the Hispanic population. While producing minimal increase in X- and Y-STR discrimination potential, access to flanking region data enabled identification of one novel X-STR and three Y-STR alleles relative to previous reports. Five ancestry-informative SNPs (aiSNPs) and two phenotype-informative SNPs (piSNPs) exhibited notable flanking region variation.

  14. Automatic detection of tooth cracks in optical coherence tomography images

    PubMed Central

    2017-01-01

    Purpose The aims of the present study were to compare the image quality and visibility of tooth cracks between conventional methods and swept-source optical coherence tomography (SS-OCT) and to develop an automatic detection technique for tooth cracks by SS-OCT imaging. Methods We evaluated SS-OCT with a near-infrared wavelength centered at 1,310 nm over a spectral bandwidth of 100 nm at a rate of 50 kHz as a new diagnostic tool for the detection of tooth cracks. The reliability of the SS-OCT images was verified by comparing the crack lines with those detected using conventional methods. After performing preprocessing of the obtained SS-OCT images to emphasize cracks, an algorithm was developed and verified to detect tooth cracks automatically. Results The detection capability of SS-OCT was superior or comparable to that of trans-illumination, which did not discriminate among the cracks according to depth. Other conventional methods for the detection of tooth cracks did not sense initial cracks with a width of less than 100 μm. However, SS-OCT detected cracks of all sizes, ranging from craze lines to split teeth, and the crack lines were automatically detected in images using the Hough transform. Conclusions We were able to distinguish structural cracks, craze lines, and split lines in tooth cracks using SS-OCT images, and to automatically detect the position of various cracks in the OCT images. Therefore, the detection capability of SS-OCT images provides a useful diagnostic tool for cracked tooth syndrome. PMID:28261523

  15. Tooth extraction, bleeding and pain control.

    PubMed

    Al-Bahlani, S; Sherriff, A; Crawford, P J

    2001-10-01

    Local anaesthesia is used routinely in dental surgery; it is effective in both pain control and--through the vasoconstrictors often contained within it--the reduction of bleeding. The extraction of deciduous teeth under general anaesthesia is often carried out without these local effects. There are no previous studies to investigate the combined effect of local anaesthesia with general anaesthesia on blood loss and pain control. A randomised, controlled clinical trial was carried out with one hundred children aged 3-5 years. Ethical approval and informed consent were obtained. Surface anaesthetic cream (EMLA) was placed on the hand into which the intravenous access was to be placed. One to two ml of blood was taken at the time of induction as a baseline of the patient's level of haematin pigment. Children in the experimental group were given one quarter of a cartridge (0.5 ml) of local anaesthetic containing epinephrine (1:80,000) in each quadrant before tooth extraction; all blood in swabs, suction equipment and disposables was collected and digested with NaOH. The children were observed for 11 minutes post-operatively for any signs of distress. Total blood loss was calculated by comparison of the baseline sample and the shed blood digests. This study showed that using local anaesthesia for dental extractions under general anaesthesia was associated with decreased blood loss (p = 0.001). The second finding--which has not been reported before--was that this use of local anaesthesia was shown to cause distress to this age group of children upon recovery from the general anaesthetic (p <0.0001). The use of local anaesthetic in this situation provided a useful reduction in post-operative bleeding. However, its use was associated with greater post-operative distress.

  16. Malformations of the tooth root in humans

    PubMed Central

    Luder, Hans U.

    2015-01-01

    The most common root malformations in humans arise from either developmental disorders of the root alone or disorders of radicular development as part of a general tooth dysplasia. The aim of this review is to relate the characteristics of these root malformations to potentially disrupted processes involved in radicular morphogenesis. Radicular morphogenesis proceeds under the control of Hertwig's epithelial root sheath (HERS) which determines the number, length, and shape of the root, induces the formation of radicular dentin, and participates in the development of root cementum. Formation of HERS at the transition from crown to root development appears to be very insensitive to adverse effects, with the result that rootless teeth are extremely rare. In contrast, shortened roots as a consequence of impaired or prematurely halted apical growth of HERS constitute the most prevalent radicular dysplasia which occurs due to trauma and unknown reasons as well as in association with dentin disorders. While odontoblast differentiation inevitably stops when growth of HERS is arrested, it seems to be unaffected even in cases of severe dentin dysplasias such as regional odontodysplasia and dentin dysplasia type I. As a result radicular dentin formation is at least initiated and progresses for a limited time. The only condition affecting cementogenesis is hypophosphatasia which disrupts the formation of acellular cementum through an inhibition of mineralization. A process particularly susceptible to adverse effects appears to be the formation of the furcation in multirooted teeth. Impairment or disruption of this process entails taurodontism, single-rooted posterior teeth, and misshapen furcations. Thus, even though many characteristics of human root malformations can be related to disorders of specific processes involved in radicular morphogenesis, precise inferences as to the pathogenesis of these dysplasias are hampered by the still limited knowledge on root formation

  17. Experimental investigation of fatigue behavior of spur gear in altered tooth-sum gearing

    NASA Astrophysics Data System (ADS)

    Sachidananda, H. K.; Gonsalvis, Joseph; Prakash, H. R.

    2012-09-01

    This paper deals with the contact stress, power loss, and pitting of spur gear tooth in altered tooth-sum gearing for a tooth-sum of 100 teeth when altered by ±4% tooth-sum. Analytical and experimental methods were performed to investigate and compare the altered tooth-sum gearing against the standard tooth-sum gearing. The experiments were performed using a power recirculating type test rig. The tooth loads for the experimental investigations were determined considering the surface durability of gears. A clear picture of the surface damage was obtained using a scanning electron microphotograph. The negative alteration in the tooth-sum performed better than the positive alteration in a tooth-sum operating between specified center distances.

  18. Comparison of flank margin cave development on San Salvador island, Bahamas, and Isla de Mona, Puerto Rico

    USGS Publications Warehouse

    Mylroie, J.; Carew, J.L.; Frank, E.F.; Larsen, Matthew C.; Boardman, M.

    1995-01-01

    Despite differences in rock age and geologic setting, both San Salvador and Isla do Mona show evidence of re-invasion of the flank margin caves by dissolutionally aggressive water following a vadose interval. The flank margin caves have very similar morphologies and characteristics, and the only major difference is attrutable to the larger lens size and the longer duration of stable lens position on Isla de Mona. The data indicate that dissolution occurs rapidly in these environments, and despite the development of large voids, the same geochemical environment can be re-established after an emergence episode. 

  19. Consequences of Predicted or Actual Asteroid Impacts

    NASA Astrophysics Data System (ADS)

    Chapman, C. R.

    2003-12-01

    Earth impact by an asteroid could have enormous physical and environmental consequences. Impactors larger than 2 km diameter could be so destructive as to threaten civilization. Since such events greatly exceed any other natural or man-made catastrophe, much extrapolation is necessary just to understand environmental implications (e.g. sudden global cooling, tsunami magnitude, toxic effects). Responses of vital elements of the ecosystem (e.g. agriculture) and of human society to such an impact are conjectural. For instance, response to the Blackout of 2003 was restrained, but response to 9/11 terrorism was arguably exaggerated and dysfunctional; would society be fragile or robust in the face of global catastrophe? Even small impacts, or predictions of impacts (accurate or faulty), could generate disproportionate responses, especially if news media reports are hyped or inaccurate or if responsible entities (e.g. military organizations in regions of conflict) are inadequately aware of the phenomenology of small impacts. Asteroid impact is the one geophysical hazard of high potential consequence with which we, fortunately, have essentially no historical experience. It is thus important that decision makers familiarize themselves with the hazard and that society (perhaps using a formal procedure, like a National Academy of Sciences study) evaluate the priority of addressing the hazard by (a) further telescopic searches for dangerous but still-undiscovered asteroids and (b) development of mitigation strategies (including deflection of an oncoming asteroid and on- Earth civil defense). I exemplify these issues by discussing several representative cases that span the range of parameters. Many of the specific physical consequences of impact involve effects like those of other geophysical disasters (flood, fire, earthquake, etc.), but the psychological and sociological aspects of predicted and actual impacts are distinctive. Standard economic cost/benefit analyses may not

  20. Interactive Tooth Separation from Dental Model Using Segmentation Field

    PubMed Central

    2016-01-01

    Tooth segmentation on dental model is an essential step of computer-aided-design systems for orthodontic virtual treatment planning. However, fast and accurate identifying cutting boundary to separate teeth from dental model still remains a challenge, due to various geometrical shapes of teeth, complex tooth arrangements, different dental model qualities, and varying degrees of crowding problems. Most segmentation approaches presented before are not able to achieve a balance between fine segmentation results and simple operating procedures with less time consumption. In this article, we present a novel, effective and efficient framework that achieves tooth segmentation based on a segmentation field, which is solved by a linear system defined by a discrete Laplace-Beltrami operator with Dirichlet boundary conditions. A set of contour lines are sampled from the smooth scalar field, and candidate cutting boundaries can be detected from concave regions with large variations of field data. The sensitivity to concave seams of the segmentation field facilitates effective tooth partition, as well as avoids obtaining appropriate curvature threshold value, which is unreliable in some case. Our tooth segmentation algorithm is robust to dental models with low quality, as well as is effective to dental models with different levels of crowding problems. The experiments, including segmentation tests of varying dental models with different complexity, experiments on dental meshes with different modeling resolutions and surface noises and comparison between our method and the morphologic skeleton segmentation method are conducted, thus demonstrating the effectiveness of our method. PMID:27532266

  1. Canine tooth size and fitness in male mandrills (Mandrillus sphinx).

    PubMed

    Leigh, Steven R; Setchell, Joanna M; Charpentier, Marie; Knapp, Leslie A; Wickings, E Jean

    2008-07-01

    Sexual selection theory explains the evolution of exaggerated male morphologies and weaponry, but the fitness consequences of developmental and age-related changes in these features remain poorly understood. This long-term study of mandrill monkeys (Mandrillus sphinx) demonstrates how age-related changes in canine tooth weaponry and adult canine size correlate closely with male lifetime reproductive success. Combining long-term demographic and morphometric data reveals that male fitness covaries simply and directly with canine ontogeny, adult maximum size, and wear. However, fitness is largely independent of other somatometrics. Male mandrills sire offspring almost exclusively when their canines exceed approximately 30 mm, or two-thirds of average adult value (45 mm). Moreover, sires have larger canines than nonsires. The tooth diminishes through wear as animals age, corresponding with, and perhaps influencing, reproductive senescence. These factors combine to constrain male reproductive opportunities to a brief timespan, defined by the period of maximum canine length. Sexually-selected weaponry, especially when it is nonrenewable like the primate canine tooth, is intimately tied to the male life course. Our analyses of this extremely dimorphic species indicate that sexual selection is closely intertwined with growth, development, and aging, pointing to new directions for sexual selection theory. Moreover, the primate canine tooth has potential as a simple mammalian system for testing genetically-based models of aging. Finally, the tooth may record details of life histories in fossil primates, especially when sexual selection has played a role in the evolution of dimorphism.

  2. Jaw lesions associated with impacted tooth: A radiographic diagnostic guide

    PubMed Central

    Mortazavi, Hamed

    2016-01-01

    This review article aimed to introduce a category of jaw lesions associated with impacted tooth. General search engines and specialized databases such as Google Scholar, PubMed, PubMed Central, MedLine Plus, Science Direct, Scopus, and well-recognized textbooks were used to find relevant studies using keywords such as "jaw lesion", "jaw disease", "impacted tooth", and "unerupted tooth". More than 250 articles were found, of which approximately 80 were broadly relevant to the topic. We ultimately included 47 articles that were closely related to the topic of interest. When the relevant data were compiled, the following 10 lesions were identified as having a relationship with impacted tooth: dentigerous cysts, calcifying odontogenic cysts, unicystic (mural) ameloblastomas, ameloblastomas, ameloblastic fibromas, adenomatoid odontogenic tumors, keratocystic odontogenic tumors, calcifying epithelial odontogenic tumors, ameloblastic fibro-odontomas, and odontomas. When clinicians encounter a lesion associated with an impacted tooth, they should first consider these entities in the differential diagnosis. This will help dental practitioners make more accurate diagnoses and develop better treatment plans based on patients' radiographs. PMID:27672610

  3. Results after wisdom tooth transplantation. A retrospective study.

    PubMed

    Schütz, Silvio; Beck, Isabelle; Kühl, Sebastian; Filippi, Andreas

    2013-01-01

    Wisdom tooth transplants offer youth the possibility of biologically fixed tooth replacement in cases of premolar agenesis or premature loss of a molar. In the present study, 57 transplants of third molars were reviewed and evaluated retrospectively on preoperative findings (root growth stages, extraction sites, indication for transplantation), on postoperative clinical findings (local gingivitis, periodontal probing values, tooth mobility, percussion sound and percussion pain) and on radiological findings (tertiary build-up of dentin, osseous periradicular conditions, progress of root growth). Only the transplants which healed with a vital pulp and in a periodontally healthy state were considered successful. Upper and lower wisdom teeth having 50% to 75% root growth progression were transplanted. The postoperative follow-up observation period averaged 26.4 months. The success of a wisdom tooth transplantation was not influenced by the root growth stage (p = 1), the extraction location of wisdom teeth (p = 0.45), or the feasibility for a transplantation (p = 0.56). Three teeth showed pulpal necrosis with apical periodontitis and were counted as failures. The success rate was rather high with 54 out of 57 transplants (94.7%), therefore wisdom tooth transplantations, with careful selection of a suitable graft and its gentle removal, can be described as a good predictable treatment.

  4. Brief communication: Tigaran (Point Hope, Alaska) tooth drilling.

    PubMed

    Schwartz, J H; Brauer, J; Gordon-Larsen, P

    1995-05-01

    In a sample of 48 adult Tigarans (1300-1700 A.D.) from Point Hope, Alaska, 33 exhibited various degrees of periodontal disease, which, in 25, resulted in tooth loss (Schwartz, unpublished data). Although extreme examples of tooth wear were prevalent in the sample, carious infection was noted in only one individual, in whom the lower central incisors (I1S) had been affected. In the left I1, infection had spread through the root's apex into the alveolar bone, causing an abscess. The buccal (labial) side of the root of this tooth, just below the crown, bears a shallow, relatively flat-bottomed depression, with a small perforation into, as well as a second hole that fully penetrates, the root canal. Both of these features appear to have been produced by an implement, and, as they are associated with a diseased tooth, and ritualistic tooth shaping or drilling of any sort was, and is, not practiced among Arctic groups, their purpose was probably therapeutic. As such, this specimen appears to represent a case of precontact New World Arctic dentistry.

  5. Energy harvesting from mastication forces via a smart tooth

    NASA Astrophysics Data System (ADS)

    Bani-Hani, Muath; Karami, M. Amin

    2016-04-01

    The batteries of the current pacing devices are relatively large and occupy over 60 percent of the size of pulse generators. Therefore, they cannot be placed in the subtle areas of human body. In this paper, the mastication force and the resulting tooth pressure are converted to electricity. The pressure energy can be converted to electricity by using the piezoelectric effect. The tooth crown is used as a power autonomous pulse generator. We refer to this envisioned pulse generator as the smart tooth. The smart tooth is in the form of a dental implant. A piezoelectric vibration energy harvester is designed and modeled for this purpose. The Piezoelectric based energy harvesters investigated and analyzed in this paper initially includes a single degree of freedom piezoelectric based stack energy harvester which utilizes a harvesting circuit employing the case of a purely resistive circuit. The next step is utilizing and investigating a bimorph piezoelectric beam which is integrated/embedded in the smart tooth implant. Mastication process causes the bimorph beam to buckle or return to unbuckled condition. The transitions results in vibration of the piezoelectric beam and thus generate energy. The power estimated by the two mechanisms is in the order of hundreds of microwatts. Both scenarios of the energy harvesters are analytically modeled. The exact analytical solution of the piezoelectric beam energy harvester with Euler-Bernoulli beam assumptions is presented. The electro-mechanical coupling and the geometric nonlinearities have been included in the model for the piezoelectric beam.

  6. Auditory function in children with Charcot-Marie-Tooth disease.

    PubMed

    Rance, Gary; Ryan, Monique M; Bayliss, Kristen; Gill, Kathryn; O'Sullivan, Caitlin; Whitechurch, Marny

    2012-05-01

    The peripheral manifestations of the inherited neuropathies are increasingly well characterized, but their effects upon cranial nerve function are not well understood. Hearing loss is recognized in a minority of children with this condition, but has not previously been systemically studied. A clear understanding of the prevalence and degree of auditory difficulties in this population is important as hearing impairment can impact upon speech/language development, social interaction ability and educational progress. The aim of this study was to investigate auditory pathway function, speech perception ability and everyday listening and communication in a group of school-aged children with inherited neuropathies. Twenty-six children with Charcot-Marie-Tooth disease confirmed by genetic testing and physical examination participated. Eighteen had demyelinating neuropathies (Charcot-Marie-Tooth type 1) and eight had the axonal form (Charcot-Marie-Tooth type 2). While each subject had normal or near-normal sound detection, individuals in both disease groups showed electrophysiological evidence of auditory neuropathy with delayed or low amplitude auditory brainstem responses. Auditory perception was also affected, with >60% of subjects with Charcot-Marie-Tooth type 1 and >85% of Charcot-Marie-Tooth type 2 suffering impaired processing of auditory temporal (timing) cues and/or abnormal speech understanding in everyday listening conditions.

  7. Tooth wear among patients suffering from mental disorders

    PubMed Central

    Piccoli, Luca; Besharat, Laith Konstantinos; Cassetta, Michele; Migliau, Guido; Di Carlo, Stefano; Pompa, Giorgio

    2014-01-01

    Summary Aim Assess oral health, treatment needs and the correlation between tooth wear and medications in patients with psychiatric disease. Methodology 92 patients (40 male and 52 female) admitted in the Department of Neurology and Psychiatry of the Umberto I Hospital of Rome underwent an oral and dental clinical examination in accordance according to World Health Organization Basic Methods Criteria. One dentist performed all clinical examinations, training and calibration was carried out by an experienced clinical examiner. To measure the degree of inter-examiner agreement Kappa statistics was calculated. Level of tooth wear was assessed using the tooth wear classification of Johansson et al. Exact psychiatric pathology and medications of each patient were registrated. The Statistical Package for the Social Sciences (SPSS Inc., Chicago, Ill.) was used to analyze the data. A value of P < 0.05 was considered statistically significant. Results 34.78% of the sample regarding tooth wear demonstrated score 2. Men demonstrated 30% score 2, and 20% score 3 and 4 whereas female patients 38.46% score 2, 7.69% score 3 and none score 4. Conclusions Chronic exposure to neuroleptic drugs can cause phenomena of bruxism. There is a direct correlation between tooth wear, psychiatric disorders and administration of certain drugs. Poor oral hygiene and extensive unmet needs for dental treatment were widespread among psychiatric patients. PMID:25002918

  8. The development of complex tooth shape in reptiles

    PubMed Central

    Zahradnicek, Oldrich; Buchtova, Marcela; Dosedelova, Hana; Tucker, Abigail S.

    2014-01-01

    Reptiles have a diverse array of tooth shapes, from simple unicuspid to complex multicuspid teeth, reflecting functional adaptation to a variety of diets and eating styles. In addition to cusps, often complex longitudinal labial and lingual enamel crests are widespread and contribute to the final shape of reptile teeth. The simplest shaped unicuspid teeth have been found in piscivorous or carnivorous ancestors of recent diapsid reptiles and they are also present in some extant carnivores such as crocodiles and snakes. However, the ancestral tooth shape for squamate reptiles is thought to be bicuspid, indicating an insectivorous diet. The development of bicuspid teeth in lizards has recently been published, indicating that the mechanisms used to create cusps and crests are very distinct from those that shape cusps in mammals. Here, we introduce the large variety of tooth shapes found in lizards and compare the morphology and development of bicuspid, tricuspid, and pentacuspid teeth, with the aim of understanding how such tooth shapes are generated. Next, we discuss whether the processes used to form such morphologies are conserved between divergent lizards and whether the underlying mechanisms share similarities with those of mammals. In particular, we will focus on the complex teeth of the chameleon, gecko, varanus, and anole lizards using SEM and histology to compare the tooth crown morphology and embryonic development. PMID:24611053

  9. Detecting Gear Tooth Fatigue Cracks in Advance of Complete Fracture

    NASA Technical Reports Server (NTRS)

    Zakrajsek, James J.; Lewicki, David G.

    1996-01-01

    Results of using vibration-based methods to detect gear tooth fatigue cracks are presented. An experimental test rig was used to fail a number of spur gear specimens through bending fatigue. The gear tooth fatigue crack in each test was initiated through a small notch in the fillet area of a tooth on the gear. The primary purpose of these tests was to verify analytical predictions of fatigue crack propagation direction and rate as a function of gear rim thickness. The vibration signal from a total of three tests was monitored and recorded for gear fault detection research. The damage consisted of complete rim fracture on the two thin rim gears and single tooth fracture on the standard full rim test gear. Vibration-based fault detection methods were applied to the vibration signal both on-line and after the tests were completed. The objectives of this effort were to identify methods capable of detecting the fatigue crack and to determine how far in advance of total failure positive detection was given. Results show that the fault detection methods failed to respond to the fatigue crack prior to complete rim fracture in the thin rim gear tests. In the standard full rim gear test all of the methods responded to the fatigue crack in advance of tooth fracture; however, only three of the methods responded to the fatigue crack in the early stages of crack propagation.

  10. The effect of light-activation sources on tooth bleaching

    PubMed Central

    Baroudi, Kusai; Hassan, Nadia Aly

    2014-01-01

    Vital bleaching is one of the most requested cosmetic dental procedures asked by patients who seek a more pleasing smile. This procedure consists of carbamide or hydrogen peroxide gel applications that can be applied in-office or by the patient (at-home/overnight bleaching system). Some in-office treatments utilise whitening light with the objective of speeding up the whitening process. The objective of this article is to review and summarise the current literature with regard to the effect of light-activation sources on in-office tooth bleaching. A literature search was conducted using Medline, accessed via the National Library of Medicine Pub Med from 2003 to 2013 searching for articles relating to effectiveness of light activation sources on in-office tooth bleaching. This study found conflicting evidence on whether light truly improve tooth whitening. Other factors such as, type of stain, initial tooth colour and subject age which can influence tooth bleaching outcome were discussed. Conclusions: The use of light activator sources with in-office bleaching treatment of vital teeth did not increase the efficacy of bleaching or accelerate the bleaching. PMID:25298598

  11. Periodontal response after tooth movement into intrabony defects.

    PubMed

    Polson, A; Caton, J; Polson, A P; Nyman, S; Novak, J; Reed, B

    1984-04-01

    The present study was undertaken since conflicting evidence exists regarding the effect of such tooth movement on levels of connective tissue attachment. Localized intrabony pockets were produced around isolated incisors in four rhesus monkeys. The root surfaces were planned to the level of the bone at the base of the angular bony defects. An oral hygiene regime was begun and continued for the remainder of the study. The experimental teeth were moved orthodontically into, and through, the original area of the intrabony defect. Two months after cessation of active tooth movement, block specimens were removed for histologic analysis. Control specimens comprised those teeth with induced periodontal defects, but without tooth movement. In specimens not subjected to tooth movement, angular bony defects were present and epithelium lined the root surface to the apical extent of instrumentation. The alveolar bone adjacent to the orthodontically moved teeth no longer had angular defect morphology. On the pressure side, epithelium lined the root surface, was interposed between root surface and bone and terminated at the apical limit of root instrumentation. On the tension side, the crest of the bone was located apical to the level of root planing, and epithelium lined the instrumented portion of the root surface. It was concluded that orthodontic tooth movement into intrabony periodontal defects was without effect upon the levels of connective tissue attachment.

  12. Inspection of Tooth Surface Geometry by Means of Vibration Measurement

    NASA Astrophysics Data System (ADS)

    Ratanasumawong, Chanat; Matsumura, Shigeki; Houjoh, Haruo

    Tooth surface undulation is one of the important sources of gear noise and vibration. The vibration caused by this source is observed as the occurrence of non-meshing vibration component or ghost noise on a vibration spectrum. Frequently ghost noise occurs at the same frequency with natural frequency of a gear pair, consequently its amplitude is amplified to the considerable level and lead to unexpected and severe noise and vibration problems. In this paper a method for inspecting tooth surface undulation is proposed and applied to a helical gear pair. Vibration characteristics of individual gear are extracted from the vibration signal of a gear by synchronous averaging technique, then a frequency response function that can be determined experimentally is applied to the individual averaged signal to assess the tooth surface undulation. The undulations are evaluated by applying this method to the measured vibration signals of the gear pair operated at various speeds and various torques, and show good agreement with each other regardless of operating conditions and also with the expectation by precise tooth surface measurement, even though the undulation is very small in the level of 0.1µm. These results suggest the ability of this method to assess the tooth surface geometry relevant to vibration.

  13. The Charcot Marie Tooth disease protein LITAF is a zinc-binding monotopic membrane protein

    PubMed Central

    Qin, Wenxia; Wunderley, Lydia; Barrett, Anne L.; High, Stephen; Woodman, Philip G.

    2016-01-01

    LITAF (LPS-induced TNF-activating factor) is an endosome-associated integral membrane protein important for multivesicular body sorting. Several mutations in LITAF cause autosomal-dominant Charcot Marie Tooth disease type 1C. These mutations map to a highly conserved C-terminal region, termed the LITAF domain, which includes a 22 residue hydrophobic sequence and flanking cysteine-rich regions that contain peptide motifs found in zinc fingers. Although the LITAF domain is thought to be responsible for membrane integration, the membrane topology of LITAF has not been established. Here, we have investigated whether LITAF is a tail-anchored (TA) membrane-spanning protein or monotopic membrane protein. When translated in vitro, LITAF integrates poorly into ER-derived microsomes compared with Sec61β, a bona fide TA protein. Furthermore, introduction of N-linked glycosylation reporters shows that neither the N-terminal nor C-terminal domains of LITAF translocate into the ER lumen. Expression in cells of an LITAF construct containing C-terminal glycosylation sites confirms that LITAF is not a TA protein in cells. Finally, an immunofluorescence-based latency assay showed that both the N- and C-termini of LITAF are exposed to the cytoplasm. Recombinant LITAF contains 1 mol/mol zinc, while mutation of predicted zinc-binding residues disrupts LITAF membrane association. Hence, we conclude that LITAF is a monotopic membrane protein whose membrane integration is stabilised by a zinc finger. The related human protein, CDIP1 (cell death involved p53 target 1), displays identical membrane topology, suggesting that this mode of membrane integration is conserved in LITAF family proteins. PMID:27582497

  14. K-Ar geochronology of basement rocks on the northern flank of the Huancabama deflection, Ecuador

    USGS Publications Warehouse

    Feininger, Tomas; Silberman, M.L.

    1982-01-01

    The Huancabamba deflection, a major Andean orocline located at the Ecuador-Peru border, constitutes an important geologic boundary on the Pacific coast of South America. Crust to the north of the deflection is oceanic and the basement is composed of basic igneous rocks of Cretaceous age, whereas crust to the south is continental and felsic rocks of Precambrian to Cretaceous age make up the basement. The northern flank of the Huancabamba Deflection in El Oro Province, Ecuador, is underlain by Precambrian polymetamorphic basic rocks of the Piedras Group; shale, siltstone, sandstone, and their metamorphosed equivalents in the Tahuin Group (in part of Devonian age); concordant syntectonic granitic rocks; quartz diorite and alaskite of the Maroabeli pluton; a protrusion of serpentinized harzburgite that contains a large inclusion of blueschist-facies metamorphic rocks, the Raspas Formation, and metamorphic rocks north of the La Palma fault. Biotite from gneiss of the Tahuin Group yields a Late Triassic K-Ar age (210 ? 8 m.y.). This is interpreted as an uplift age and is consistent with a regional metamorphism of Paleozoic age. A nearby sample from the Piedras Group that yielded a hornblende K-Ar age of 196 ? 8 m.y. was affected by the same metamorphic event. Biotite from quartz diorite of the mesozonal Maroabeli pluton yields a Late Triassic age (214 ? 6 m.y.) which is interpreted as an uplift age which may be only slightly younger than the age of magmatic crystallization. Emplacement of the pluton may postdate regional metamorphism of the Tahuin Group. Phengite from politic schist of the Raspas Formation yields an Early Cretaceous K-Ar age (132 ? 5 m.y.). This age is believed to date the isostatic rise of the encasing serpentinized harzburgite as movement along a subjacent subduction zone ceased, and it is synchronous with the age of the youngest lavas of a coeval volcanic arc in eastern Ecuador. A Late Cretaceous K-Ar age (74.4 ? 1.1 m.y.) from hornblende in

  15. Quaternary tectonic stability of the Bahamian archipelago: evidence from fossil coral reefs and flank margin caves

    NASA Astrophysics Data System (ADS)

    Carew, James L.; Mylroie, John E.

    Throughout the islands of the Bahamian archipelago fossil coral reefs are found from current sea level up to a maximum elevation of +4 m. {234U}/{230Th} radiometric dates obtained from in situ corals from these reefs, by both alpha-count and mass-spectrometric techniques, indicates that they were all formed during Oxygen Isotope Substage 5e (ca. 125,000 years ago). Those data are consistent with a maximum sea-level highstand of +6 m during Substage 5e, and either no vertical motion of the Bahamas, or possible isostatic subsidence of up to 2 m during the past 120,000 years. No older in situ fossil corals, or other subtidal deposits, have been found subaerially exposed anywhere in the Bahamas. That finding suggests that late Quaternary (at least the past 300,000 years) isostatic subsidence has occurred at a rate of 1-2 m per hundred thousand years, and/or no pre-5e highstands were above modern sea level. An independent corroboration of the conclusions drawn about sea level amplitude and tectonic stability of the Bahamas from the coral reef data is available from examination of abundant flank margin caves (horizontal, phreatic dissolution caves) found above modern sea level throughout the Bahamas. These horizontally extensive air-filled caves have dissolutional ceilings with elevations that are restricted to +1 to +7 m, which is consistent with formation at the margin of a thin freshwater lens elevated by a past +6 m sea-level highstand. The restricted cave elevations, and the lack of stalagmites in these caves that are older than 100,000 years, are also consistent with cave formation during Substage 5e, and possible subsequent isostatic subsidence of a few metres. The subsurface geology of the southeastern Bahamas contains a long-term record (millions of years) that has been attributed to past tectonic activity along the North American/Caribbean plate boundary. While that record suggests differential subsidence across the Bahamas in the Tertiary Period, the data from

  16. The third Volcano of La Réunion Island : new geochemical data from submarine flanks

    NASA Astrophysics Data System (ADS)

    Smietana, M. S.; Bachèlery, P. B.; Hémond, C. H.

    2009-04-01

    The existence of a third volcano on La Réunion Island, named Les Alizés, was presumed from gravity and magnetic data. This buried volcano is only known by the hypovolcanic complex encountered during a geothermal exploration drilling, beneath the eastern flank of Piton de la Fournaise. Negative magnetic anomalies offshore the north-eastern coast, suggest that the rocks belonging to Les Alizés volcano could be present in this area. In January 2008, a scientific survey onboard the R/V METEOR was carried out offshore La Réunion within the frame of the project ERODER2. During this campaign, submarine basalts were dredged on three rift zones of this intraplate volcanic island (NE and SE rift zones of Piton de la Fournaise volcano, and l'Etang Salé rift zone off the southern flank of Piton des Neiges volcano). The dredged rocks were analyzed for their major and trace element bulk compositions and compared with all available data for both Piton des Neiges and Piton de la Fournaise. Two groups of basaltic lava have been identified. Group 1, which encompasses samples from each rift zone, presents compositions similar to the subaerial basaltic rocks. Group 2, only found in the northern part of the NE rift zone, has higher K2O (1,28-1,44 wt.%), P2O5 (0,35-0,43 wt.%), and La/Sm (4,1-4,2) compared to subaerial and Group 1 lava [K20 (0,61-1,07 wt.%), P2O5 (0,17-0,28 wt.%), La/Sm (3,1-3,8)]. Such characteristics (high K2O, P2O5 and HREE and low SiO2) are exceptional for La Réunion lava and Group 2 composition does not correspond to any known rock from this island. This suggests a possible compositional change during the building of La Réunion edifice that can be indicative of variations in the partial melting processes. Is Les Alizés volcano there?

  17. Bizarre tooth surface loss and the Miswak stick.

    PubMed

    Karia, Roshni; Kelleher, Martin G

    2014-05-01

    Tooth surface loss can present in a variety of ways, some of which can appear rather strange on first examination. This case report demonstrates an unusual presentation of tooth surface loss (TSL) and its subsequent treatment. This loss of hard dental tissue appeared to be affecting the whole of the patient's remaining dentition, both lingually and buccally. Detailed questioning revealed the origins of this problem which turned out to be due to excessive use of an intra-oral Miswak chewing stick. Cinical Relevance: This article will enable clinicians to understand the importance of specific, targeted history-taking, involving a rare case of tooth surface loss as well as the use of minimally destructive restoration composites and a fibre-reinforced composite bridge.

  18. Computerized Analysis of Digital Photographs for Evaluation of Tooth Movement

    PubMed Central

    Toodehzaeim, Mohammad Hossein; Karandish, Maryam; Karandish, Mohammad Nabi

    2015-01-01

    Objectives: Various methods have been introduced for evaluation of tooth movement in orthodontics. The challenge is to adopt the most accurate and most beneficial method for patients. This study was designed to introduce analysis of digital photographs with AutoCAD software as a method to evaluate tooth movement and assess the reliability of this method. Materials and Methods: Eighteen patients were evaluated in this study. Three intraoral digital images from the buccal view were captured from each patient in half an hour interval. All the photos were sent to AutoCAD software 2011, calibrated and the distance between canine and molar hooks were measured. The data was analyzed using intraclass correlation coefficient. Results: Photographs were found to have high reliability coefficient (P > 0.05). Conclusion: The introduced method is an accurate, efficient and reliable method for evaluation of tooth movement. PMID:26622272

  19. Computer-Assisted Technique for Surgical Tooth Extraction

    PubMed Central

    Hamza, Hosamuddin

    2016-01-01

    Introduction. Surgical tooth extraction is a common procedure in dentistry. However, numerous extraction cases show a high level of difficulty in practice. This difficulty is usually related to inadequate visualization, improper instrumentation, or other factors related to the targeted tooth (e.g., ankyloses or presence of bony undercut). Methods. In this work, the author presents a new technique for surgical tooth extraction based on 3D imaging, computer planning, and a new concept of computer-assisted manufacturing. Results. The outcome of this work is a surgical guide made by 3D printing of plastics and CNC of metals (hybrid outcome). In addition, the conventional surgical cutting tools (surgical burs) are modified with a number of stoppers adjusted to avoid any excessive drilling that could harm bone or other vital structures. Conclusion. The present outcome could provide a minimally invasive technique to overcome the routine complications facing dental surgeons in surgical extraction procedures. PMID:27127510

  20. High-altitude illness induced by tooth root infection

    PubMed Central

    Finsterer, J

    1999-01-01

    High-altitude illness may occur after recent pulmonary infection, but high-altitude illness after root canal therapy has not been described previously. A 44-year-old man is presented who skied to a 3333 m high peak in the Eastern Alps one day after he had undergone root canal therapy because of a tooth root infection. After 4 hours above 3000 m severe symptoms of high-altitude illness, including pulmonary oedema, developed. His condition improved after immediate descent. The next day he presented with local and general signs of infection which were successfully treated with gingival incisions and antibiotics. In conclusion, acute tooth root infection and root canal therapy may induce high-altitude illness at an altitude just above 3000 m.


Keywords: high-altitude illness; pulmonary oedema; root canal therapy; tooth root infection PMID:10715764

  1. Computer-Assisted Technique for Surgical Tooth Extraction.

    PubMed

    Hamza, Hosamuddin

    2016-01-01

    Introduction. Surgical tooth extraction is a common procedure in dentistry. However, numerous extraction cases show a high level of difficulty in practice. This difficulty is usually related to inadequate visualization, improper instrumentation, or other factors related to the targeted tooth (e.g., ankyloses or presence of bony undercut). Methods. In this work, the author presents a new technique for surgical tooth extraction based on 3D imaging, computer planning, and a new concept of computer-assisted manufacturing. Results. The outcome of this work is a surgical guide made by 3D printing of plastics and CNC of metals (hybrid outcome). In addition, the conventional surgical cutting tools (surgical burs) are modified with a number of stoppers adjusted to avoid any excessive drilling that could harm bone or other vital structures. Conclusion. The present outcome could provide a minimally invasive technique to overcome the routine complications facing dental surgeons in surgical extraction procedures.

  2. Estimating Size of Gear Tooth Root Crack Using Embedded Modelling

    NASA Astrophysics Data System (ADS)

    James Li, C.; Lee, Hyungdae; Choi, Suk Hwan

    2002-09-01

    This paper describes an embedded modelling approach for identifying gear meshing stiffness from measured gear angular displacement or transmission error. An embedded model integrating a physical based model of the gearbox and a parametric representation, in the form of truncated Fourier series, of meshing stiffness is established. A solution method is then used to find the meshing stiffness that minimises the discrepancy between model output and measured output. Furthermore, an algorithm is also developed to estimate the size of tooth crack from identified meshing stiffness. Both simulation and experimental studies were conducted to evaluate if identified tooth meshing stiffness can reveal a tooth crack more effectively, and if the crack size can be estimated with an adequate level of accuracy.

  3. Multidisciplinary Treatment Options of Tooth Avulsion Considering Different Therapy Concepts

    PubMed Central

    Kostka, Eckehard; Meissner, Simon; Finke, Christian H; Mandirola, Manlio; Preissner, Saskia

    2014-01-01

    Background: Avulsion of permanent front teeth is a rare accident, mostly affecting children between seven and nine years of age. Replanted and splinted, these teeth often develop inflammation, severe resorption or ankylosis affecting alveolar bone development and have to be extracted sooner or later. Objectives: The purpose of this study was to evaluate different therapy concepts to create a structured concept for the treatment of avulsions. Results: Based on existing therapy concepts, a concept for different initial conditions (dry time, age, growth, tooth, hard and soft tissues) was developed and is presented here. Conclusion: A great deal of research has been performed during recent years and guidelines for the management of avulsions have been published. With the help of this literature it is possible to identify the best treatment procedure for each tooth. Clinical Relevance: The prognosis of avulsed teeth can be improved by considering evidence-based therapy concepts. Resorption, ankylosis and tooth loss could be minimized. PMID:25352922

  4. Interdisciplinary Treatment of a Fused Lower Premolar with Supernumerary Tooth

    PubMed Central

    Gadimli, Cengiz; Sari, Zafer

    2011-01-01

    The objective of this report is to describe combined orthodontic and endodontic treatment of a fused mandibular premolar with supernumerary tooth. The patient was a 15 year old girl seeking orthodontic treatment for the correction of maxillary and mandibular crowding. Cephalometric examination revealed skeletally Class I relationship. The panoramic radiograph showed a fused tooth with two separate pulp chambers and two separate root canals connecting in apical third. After the endodontic treatment of the fused teeth, the stripping of the supernumerary tooth was performed to establish a Class I canine relationship and to correct midline deviation. At the end of the treatment, the crowding was resolved and positive overjet and overbite was achieved. PMID:21769280

  5. In phantom Dosimetric response of tooth enamel to neutrons.

    PubMed

    Fattibene, P; Angelone, M; Pillon, M; De Coste, V

    2004-01-01

    Electron Paramagnetic Resonance dosimetry based on tooth enamel has one important application in dose reconstruction of nuclear plant workers, where the contribution of neutrons to individual dose is often important. Evaluation of tooth enamel response to neutrons is thus an important goal. A few experimental data at thermal and fast neutron energies are available. A first evaluation of the tooth enamel relative response to 60Co in monoenergetic neutron flux of 2.8 and of 14 MeV, published elsewhere, has provided results apparently non-consistent with the results obtained at lower and higher energies. A comparison of those results in the 2.8 and 14 MeV beams with those available in the literature for other beams is reported and possible reasons for incongruities are discussed. Dose conversion factors of enamel to the water and air are also calculated and reported.

  6. Role of Homeobox Genes in Tooth Morphogenesis: A Review

    PubMed Central

    Suryadeva, Sreevalli

    2015-01-01

    In oral cavity, disturbances due to genetic alterations may range from lack of tooth development to morphological defects. Due to technical advances in genetic engineering and molecular biology, valuable information regarding dentofacial growth could be studied in detailed manner. This helped us to explain the aetiology and pathogenesis of many dentofacial disorders. The success in treatment lies first in determining the aetiology of tooth anomalies and finally differentiating the effect of genes and environment on the orofacial diseases of that particular individual. Several genes belonging to class II homeobox families are expressed during odontogenesis however homeobox genes are not directly imvolved in tooth formation as they are not directly expressed in the first branchial arch derivatives. PMID:25859538

  7. Rare case of a strangulated intercostal flank hernia following open nephrectomy: A case report and review of literature

    PubMed Central

    Akinduro, Oluwaseun O.; Jones, Frank; Turner, Jacquelyn; Cason, Frederick; Clark, Clarence

    2015-01-01

    Introduction Flank incisions may be associated with incisional flank hernias, which may progress to incarceration and strangulation. Compromised integrity of the abdominal and intercostal musculature due to previous surgery may be associated with herniation of abdominal contents into the intercostal space. There have been six previously reported cases of herniation into the intercostal space after a flank incision for a surgical procedure. This case highlights the clinical picture associated with an emergent strangulated hernia and highlights the critical steps in its management. Presentation of case We present a case of a 79-year-old adult man with multiple comorbidities presenting with a strangulated flank hernia secondary to an intercostal incision for a right-sided open nephrectomy. The strangulated hernia required emergent intervention including right-sided hemi-colectomy with ileostomy and mucous fistula. Discussion Abdominal incisional hernias are rare and therefore easily overlooked, but may result in significant morbidity or even death in the patient.. The diagnosis can be made with a thorough clinical examination and ultrasound or computed topographical investigation. Once a hernia has become incarcerated, emergent surgical management is necessary to avoid strangulation and small bowel obstruction. Conclusion Urgent diagnosis and treatment of this extremely rare hernia is paramount especially in the setting of strangulation. PMID:26629848

  8. Polymorphisms of Flanking Region of the ASB15 Gene and Their Associations with Performance Traits in Chicken.

    PubMed

    Wang, Y C; Han, R L; Li, Z J; Geng, J; Tian, Y D; Jiang, R R; Wu, J P; Kang, X T

    2017-01-02

    Research on the identity of genes and their relationship with traits of economic importance in chickens could assist in the selection of poultry. In this study, an F2 resource population of Gushi chickens crossed with Anka broilers was used to detect single-nucleotide polymorphisms (SNPs) in the flanking region of the ASB15 gene by DNA sequencing and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). One SNP of -1271 C>T in 5' flanking region of the chicken ASB15 gene and two SNPs of the 10618 A>G and 10716 G>A in 3' flanking region were identified. Furthermore, the 10618 A>G and 10716 G>A in 3' flanking region were in complete linkage. Association analysis results showed that -1271 C>T was not associated with performance traits, while the 10618 A>G and 10716 G>A were significantly associated with BW2, 4, 6, 8, 10, 12, SL12, CD8, CW4, 8, 12, BSL4, 8, 12, and SEW, EW, WW, BMW, LW, CW, SFT. Our results suggest that the ASB15 gene profoundly affects chicken performance traits.

  9. The occurrence of Mt Barca flank eruption in the evolution of the NW periphery of Etna volcano (Italy)

    NASA Astrophysics Data System (ADS)

    Branca, S.; Del Carlo, P.; Lo Castro, M. D.; de Beni, E.; Wijbrans, J.

    2009-01-01

    Geological surveys, tephrostratigraphic study, and 40Ar/39Ar age determinations have allowed us to chronologically constrain the geological evolution of the lower NW flank of Etna volcano and to reconstruct the eruptive style of the Mt Barca flank eruption. This peripheral sector of the Mt Etna edifice, corresponding to the upper Simeto valley, was invaded by the Ellittico volcano lava flows between 41 and 29 ka ago when the Mt Barca eruption occurred. The vent of this flank eruption is located at about 15 km away from the summit craters, close to the town of Bronte. The Mt Barca eruption was characterized by a vigorous explosive activity that produced pyroclastic deposits dispersed eastward and minor effusive activity with the emission of a 1.1-km-long lava flow. Explosive activity was characterized by a phreatomagmatic phase followed by a magmatic one. The geological setting of this peripheral sector of the volcano favors the interaction between the rising magma and the shallow groundwater hosted in the volcanic pile resting on the impermeable sedimentary basement. This process produced phreatomagmatic activity in the first phase of the eruption, forming a pyroclastic fall deposit made of high-density, poorly vesicular scoria lapilli and lithic clasts. Conversely, during the second phase, a typical strombolian fall deposit formed. In terms of hazard assessment, the possible occurrence of this type of highly explosive flank eruption, at lower elevation in the densely inhabited areas, increases the volcanic risk in the Etnean region and widens the already known hazard scenario.

  10. [Cloning of 5', 3' flanking sequence of ovine BLG and regulating the expression of GFP in mammary gland cell line].

    PubMed

    Liu, Ming-Jun; Li, Wen-Rong; Wu, Jian; Huang, Jun-Cheng; Guo, Zhi-Qin; Qu, Xin-Yong; Paul, Kroon

    2002-01-01

    5' and 3' flanking region of ovine BLG were amplified from sheep genomic DNA according to the published whole sequence of ovine BLG and cloned to pGEM-T vector correspondently. By partially sequencing, the sequences of BLG 5' and 3' flanking were the same as that of publication completely. The recombinant structure used to direct exogenous gene especially to express in mammary gland was constructed by joining 4.2 kb 5' flanking with 2.1 kb 3' flanking. In order to assess the efficiency of BLG regulatory elements, green fluorescent protein (GFP) gene as a reporter was fused with BLG construct and transfected the mammary epithelial cells (TD47). Through observation under UV microscope and detection by fluorometer, it is demonstrated that the GFP has been successfully expressed in TD47 cell line. By virtue of direct observation and quantitative analysis, the BLG-GFP construct can be served as a model for the quick assessment of mammary gland expression construct.

  11. Tooth development in Ambystoma mexicanum: phosphatase activities, calcium accumulation and cell proliferation in the tooth-forming tissues.

    PubMed

    Wistuba, Joachim; Ehmcke, Jens; Clemen, Günter

    2003-06-01

    Prerequisites of tooth formation, cell proliferation in the tooth-forming tissues, calcium accumulation and the enzymatic activities of alkaline (ALP) and acid phosphatases (ACP) were investigated by immunohistochemical and histochemical methods in various developmental stages of the Mexican Axolotl, Ambystoma mexicanum. During the growth of replacement teeth, the tooth-forming tissues continually recruit cells from the surrounding regions. The basal layer of the oral epithelium, the dental lamina and sometimes even the outer enamel epithelium provide cells for the differentiated inner enamel epithelium, in which the active ameloblasts are localized. The differentiating odontoblasts are derived from proliferating cells situated basally to the replacement teeth in the mesenchymal tissue. When differentiation has started and the cells have become functional, proliferative activity can no longer be observed. Calcium is accumulated close to the site of mineralization in the inner enamel epithelium and in the odontoblasts as it is in mammals, elasmobranchii and teleostei. The activities of ACP and ALP related to the mineralization of the replacement teeth are separated spatially and not sequentially as they are in mammals. However, the results indicate a similar function of these enzymatic components in relation to tooth formation and maturation of mineral deposition. Most of the substantial processes related to tooth formation reported from other vertebrates occur in a manner similar to that in Ambystoma mexicanum, but there also seem to be basic mechanisms present that are realised in a unique way in this urodele.

  12. External Validity of Contingent Valuation: Comparing Hypothetical and Actual Payments.

    PubMed

    Ryan, Mandy; Mentzakis, Emmanouil; Jareinpituk, Suthi; Cairns, John

    2016-10-09

    Whilst contingent valuation is increasingly used in economics to value benefits, questions remain concerning its external validity that is do hypothetical responses match actual responses? We present results from the first within sample field test. Whilst Hypothetical No is always an Actual No, Hypothetical Yes exceed Actual Yes responses. A constant rate of response reversals across bids/prices could suggest theoretically consistent option value responses. Certainty calibrations (verbal and numerical response scales) minimise hypothetical-actual discrepancies offering a useful solution. Helping respondents resolve uncertainty may reduce the discrepancy between hypothetical and actual payments and thus lead to more accurate policy recommendations. Copyright © 2016 John Wiley & Sons, Ltd.

  13. Generation of gear tooth surfaces by application of CNC machines

    NASA Technical Reports Server (NTRS)

    Litvin, F. L.; Chen, N. X.

    1994-01-01

    This study will demonstrate the importance of application of computer numerically controlled (CNC) machines in generation of gear tooth surfaces with new topology. This topology decreases gear vibration and will extend the gear capacity and service life. A preliminary investigation by a tooth contact analysis (TCA) program has shown that gear tooth surfaces in line contact (for instance, involute helical gears with parallel axes, worm gear drives with cylindrical worms, etc.) are very sensitive to angular errors of misalignment that cause edge contact and an unfavorable shape of transmission errors and vibration. The new topology of gear tooth surfaces is based on the localization of bearing contact, and the synthesis of a predesigned parabolic function of transmission errors that is able to absorb a piecewise linear function of transmission errors caused by gear misalignment. The report will describe the following topics: description of kinematics of CNC machines with six degrees of freedom that can be applied for generation of gear tooth surfaces with new topology. A new method for grinding of gear tooth surfaces by a cone surface or surface of revolution based on application of CNC machines is described. This method provides an optimal approximation of the ground surface to the given one. This method is especially beneficial when undeveloped ruled surfaces are to be ground. Execution of motions of the CNC machine is also described. The solution to this problem can be applied as well for the transfer of machine tool settings from a conventional generator to the CNC machine. The developed theory required the derivation of a modified equation of meshing based on application of the concept of space curves, space curves represented on surfaces, geodesic curvature, surface torsion, etc. Condensed information on these topics of differential geometry is provided as well.

  14. Sclerostin Promotes Bone Remodeling in the Process of Tooth Movement

    PubMed Central

    Shu, Rui; Bai, Ding; Sheu, Tzongjen; He, Yao; Yang, Xianrui; Xue, Chaoran; He, Yiruo; Zhao, Mengyuan; Han, Xianglong

    2017-01-01

    Tooth movement is a biological process of bone remodeling induced by mechanical force. Sclerostin secreted by osteocytes is mechanosensory and important in bone remodeling. However, little is known regarding the role of sclerostin in tooth movement. In this study, models of experimental tooth movement were established in rats and mice. Sclerostin expression was investigated with immunohistochemistry staining, and osteoclastic activity was analyzed with tartrate-resistant acid phosphatase (TRAP) staining. MLO-Y4 osteocyte-like cells underwent uniaxial compression and tension stress or were cultured in hypoxia conditions. Expression of sclerostin was assessed by RT-qPCR and ELISA. MLO-Y4 cells were cultured with recombinant human sclerostin (rhSCL) interference and then co-cultured with RAW264.7 osteoclast precursor cells. Expressions of RANKL and OPG were analyzed by RT-qPCR, and osteoclastic activity was assessed by TRAP staining. During tooth movement, sclerostin was expressed differently in compression and tension sites. In SOST knock-out mice, there were significantly fewer TRAP-positive cells than in WT mice during tooth movement in compression sites. In-vitro studies showed that the expression of sclerostin in MLO-Y4 osteocyte-like cells was not different under a uniaxial compression and tension force, whereas hypoxia conditions significantly increased sclerostin expression in MLO-Y4 cells. rhSCL interference increased the expression of RANKL and the RANKL/OPG ratio in MLO-Y4 cells and the osteoclastic induction ability of MLO-Y4 cells in experimental osteocyte-osteoclast co-culture. These data suggest that sclerostin plays an important role in the bone remodeling of tooth movement. PMID:28081119

  15. Sclerostin Promotes Bone Remodeling in the Process of Tooth Movement.

    PubMed

    Shu, Rui; Bai, Ding; Sheu, Tzongjen; He, Yao; Yang, Xianrui; Xue, Chaoran; He, Yiruo; Zhao, Mengyuan; Han, Xianglong

    2017-01-01

    Tooth movement is a biological process of bone remodeling induced by mechanical force. Sclerostin secreted by osteocytes is mechanosensory and important in bone remodeling. However, little is known regarding the role of sclerostin in tooth movement. In this study, models of experimental tooth movement were established in rats and mice. Sclerostin expression was investigated with immunohistochemistry staining, and osteoclastic activity was analyzed with tartrate-resistant acid phosphatase (TRAP) staining. MLO-Y4 osteocyte-like cells underwent uniaxial compression and tension stress or were cultured in hypoxia conditions. Expression of sclerostin was assessed by RT-qPCR and ELISA. MLO-Y4 cells were cultured with recombinant human sclerostin (rhSCL) interference and then co-cultured with RAW264.7 osteoclast precursor cells. Expressions of RANKL and OPG were analyzed by RT-qPCR, and osteoclastic activity was assessed by TRAP staining. During tooth movement, sclerostin was expressed differently in compression and tension sites. In SOST knock-out mice, there were significantly fewer TRAP-positive cells than in WT mice during tooth movement in compression sites. In-vitro studies showed that the expression of sclerostin in MLO-Y4 osteocyte-like cells was not different under a uniaxial compression and tension force, whereas hypoxia conditions significantly increased sclerostin expression in MLO-Y4 cells. rhSCL interference increased the expression of RANKL and the RANKL/OPG ratio in MLO-Y4 cells and the osteoclastic induction ability of MLO-Y4 cells in experimental osteocyte-osteoclast co-culture. These data suggest that sclerostin plays an important role in the bone remodeling of tooth movement.

  16. ANESTHESIA FOR CHARCOT-MARIE-TOOTH DISEASE: CASE REPORT.

    PubMed

    Alzaben, Khalid R; Samarah, Omar Q; Obeidat, Salameh S; Halhouli, Oday; Al Kharabsheh, Murad

    2016-06-01

    Charcot-Marie-Tooth disease comprises a group of disorders characterized by progressive muscle weakness and wasting. Reviewing the anaesthetic literature produced conflicting reports about the best anaesthetic options for patients with CMTD; as they are at increased risk of prolonged response to muscle relaxants, malignant hyperthermia and risks of regional anaesthesia. We present a case of the successful use of total intravenous anaesthesia with dexmedetomidine and propofol combined with caudal block using bupivacaine mixed with dexmedetomidine without any complications, for a 17 year old male patient with Charcot Marie-Tooth disease who underwent a lower limb orthopedic surgery.

  17. Crystal structure of human tooth enamel studied by neutron diffraction

    NASA Astrophysics Data System (ADS)

    Ouladdiaf, Bachir; Rodriguez-Carvajal, Juan; Goutaudier, Christelle; Ouladdiaf, Selma; Grosgogeat, Brigitte; Pradelle, Nelly; Colon, Pierre

    2015-02-01

    Crystal structure of human tooth enamel was investigated using high-resolution neutron powder diffraction. Excellent agreement between observed and refined patterns is obtained, using the hexagonal hydroxyapatite model for the tooth enamel, where a large hydroxyl deficiency ˜70% is found in the 4e site. Rietveld refinements method combined with the difference Fourier maps have revealed, however, that the hydroxyl ions are not only disordered along the c-axis but also within the basal plane. Additional H ions located at the 6h site and forming HPO42- anions were found.

  18. Turner's tooth with unique radiographic presentation: a case report.

    PubMed

    Lakshman, Anusha Rangare; Kanneppady, Sham Kishor; Castelino, Renita Lorina

    2014-01-01

    Hypoplasia--the result of a disruption in the enamel matrix formation process--causes a defect in the quality and thickness of enamel. Enamel formation is a complex and highly regulated process. Enamel defects have been associated with a broad spectrum of etiologies, including genetic, epigenetic, systemic, local, and environmental factors. An enamel defect in the permanent teeth caused by periapical inflammatory disease in the overlying primary tooth is referred to as Turner's tooth (also known as Turner's hypoplasia). This article presents a case of Turner's hypoplasia of the first mandibular premolar, with an unusual radiographic presentation.

  19. The Missing Tooth: A Curious Case of Postobstructive Pneumonia

    PubMed Central

    Holmes, Ian; Gajurel, Kiran; Montoya, Jose

    2016-01-01

    Foreign body aspirations that are not recognized at the time of aspiration can lead to insidious symptoms that can present a diagnostic challenge. We report the case of a 70-year-old man presenting with postobstructive pneumonia 2 months after aspirating his own tooth during a meal. He had been mistakenly diagnosed with asthma and treated with bronchodilators before a computed tomography scan of the thorax revealed the impacted tooth in his left bronchus. We review the clinical features and microbiology of postobstructive pneumonia and discuss the rationale of its treatment. PMID:27419162

  20. CBCT-Aided Multidisciplinary Approach to Salvaging an Intruded Tooth.

    PubMed

    Pamboo, Jaya; Hans, Manoj Kumar; Chander, Subhash; Kumar, Santosh; Chinna, Harleen

    2016-03-01

    Among the most severe types of traumatic dental injuries is intrusive luxation, which displaces the affected tooth deeper into the alveolus, causing significant damage to the pulp and all of the supporting structures. This article describes a unique case of intrusive luxation of the mature left maxillary central incisor in an 18-year-old male patient. The diagnosis was confirmed using cone-beam computed tomography (CBCT), after which the intruded tooth was successfully repositioned by endodontic and orthodontic management. This was followed by prosthodontic rehabilitation. This case report also discusses the role of CBCT in effectively diagnosing this type of injury.

  1. The Correlation between Bone Loss and Tooth Malalignment.

    DTIC Science & Technology

    1982-01-22

    to correlate periodontal bone loss and the malpositionini of mandibular anterior teeth. In the absence of gingival t.issue, a more accurate correlation ...AD-AiI 545 ARM4Y INST OF DENTAL RESEARCH WASHINGTON DC F/S 6/5 THE CORRELATION BETWEEN BONE LOSS AND TOOTH MALALIONMENT. (U) JAN 82 M A RUSSELL, L...CATALOG NUMBER .’- TITLE(and ubtite) 1 037 5. TYPE OF -ft(EPORT A PERIOD COVERED The Correlation Between Bone Loss and Tooth Suhmission of paper

  2. New bone formation by orthodontic tooth movement for implant placement

    PubMed Central

    Cabbar, Fatih; Nur, Rahime Burcu; Dikici, Burcu; Canpolat, Ceyhun; Capar, Gonca Duygu

    2016-01-01

    Bone defects at the anterior regions of the jaws often cause esthetic problems such as gingival disharmonies and longer crowns than neighboring teeth. Variety of procedures can be used in this region for achieving sufficient bone volume with or without different bone graft materials. All of these procedures has their own advantages and disadventages. New bone formation was defined with orthodontic tooth movement in different regions. In this case we present the use of orthodontic tooth movement, for achieving sufficient bone volume, in anterior maxillary region, for esthetic and functional results. PMID:28299281

  3. Tooth contact shift in loaded spiral bevel gears

    NASA Technical Reports Server (NTRS)

    Savage, M.; Altidis, P. C.; Lewicki, D. G.; Coy, J. J.; Litvin, F. L.

    1989-01-01

    An analytical method is presented to predict the shifts of the contact ellipses of spiral bevel gear teeth under load. The contact ellipse shift is the motion of the tooth contact position from the ideal pitch point to its location under load. The shifts are due to the elastic motions of the gear and pinion supporting shafts and bearings. The calculations include the elastic deflections of the gear shafts and the deflections of the four shaft bearings. The method assumes that the surface curvature of each tooth is constant near the unloaded pitch point. Results from these calculations will help designers reduce transmission weight without seriously reducing transmission performance.

  4. Tooth Contact Shift in Loaded Spiral Bevel Gears

    NASA Technical Reports Server (NTRS)

    Savage, M.; Altidis, P. C.; Lewicki, D. G.; Coy, J. J.; Litvin, F. L.

    1989-01-01

    An analytical method is presented to predict the shifts of the contact ellipses of spiral bevel gear teeth under load. The contact ellipse shift is the motion of the tooth contact position from the ideal pitch point to its location under load. The shifts are due to the elastic motions of the gear and pinion supporting shafts and bearings. The calculations include the elastic deflections of the gear shafts and the deflections of the four shaft bearings. The method assumes that the surface curvature of each tooth is constant near the unloaded pitch point. Results from these calculations will help designers reduce transmission weight without seriously reducing transmission performance.

  5. Gear sound levels with various tooth contact ratios and forms

    NASA Technical Reports Server (NTRS)

    Lenski, Joseph W., Jr.; Spencer, Robert H.; Drago, Raymond J.; Valco, Mark J.; Oswald, Fred B.

    1993-01-01

    The real noise reduction benefits which may be obtained through the use of one gear tooth form as compared to another is an important design parameter for any geared system, especially for helicopters in which both weight and reliability are very important factors. The design and testing of nine sets of gears which are as identical as possible except for their basic tooth geometry are described. Noise measurements were made at various combinations of load and speed for each gear set so that direct comparisons could be made. The resultant data was analyzed so that valid conclusions could be drawn and interpreted for design use.

  6. Nonlinear sediment thickness increase on the western East Pacific Rise flank, 45°S

    NASA Astrophysics Data System (ADS)

    Horn, Michael; Uenzelmann-Neben, Gabriele

    2013-07-01

    Sediment thickness was evaluated on the western flank of the East Pacific Rise (EPR) at 45°S, based on high-resolution seismic data gathered during cruise 213/2 of R/V Sonne in 2011. Two zones with distinctly different sediment thickness were identified, separated by a transitional zone bordering a pseudo-fault. Sediment in the more distal zone 2 is almost twice as thick (~120 m) as in zone 1 close to the EPR. This is in contrast to the expected progressive sedimentary column thickening with seafloor age and distance from the spreading axis. The younger of two seismic units detected within the sedimentary column (EPR-2) occurs mainly in the distal zone on crust older than 9 Ma, whereas on younger crust it is present only in small isolated bodies. Both sedimentary units drape the basement. The drape is interpreted to represent particle settling from suspension and a generally low regional primary productivity. The spatial variation in sediment thickness cannot be explained by existing models, and other processes considered in the present case are (1) higher productivity in the western sector of the survey area, where thicker sediments were observed (zone 2), (2) the formation of sediment drifts near basement highs (`seamount effect'), due to flow of Lower Circumpolar Deep Water affecting sediment deposition, and (3) erosion and/or non-deposition of the younger EPR-2 unit, due to elevated bed shear stresses associated with eddies transferring kinetic energy to the seafloor

  7. Seismic evidence for blind thrusting of the northwestern flank of the Venezuelan Andes

    NASA Astrophysics Data System (ADS)

    de Toni, Bruno; Kellogg, James

    1993-12-01

    Surface geology and seismic and well data from the northwestern flank of the Venezuelan Andes indicate overthrusting of Andean basement rocks toward the adjacent Maracaibo Basin along a blind thrust fault. The frontal monocline is interpreted as the forelimb of a northwestward verging fault-related fold deformed over a crustal-scale ramp. The Andean block has been thrust 20 km to the northwest and uplifted 10 km on a ramp that dips about 20°-30° southeastward. The thrust fault ramps up through crystalline basement rocks to a decollement horizon within the shaly units of the Cretaceous Colon-Mito Juan formations. Backthrusts in the monocline produce a wedge geometry and reduce the amount of blind slip required on the decollement northwest of the Andes. The rigid Andean uplift was caused by northwest-southeast compressive tectonic forces related to the convergence of the Caribbean plate, the Panama volcanic arc, and northwestern South America. The thick (up to 6 km) molasse deposits accumulated in the foredeep basin indicate that the Venezuelan Andes started to rise as early as the early Miocene. However, a late Miocene intramolasse unconformity marks the beginning of the formation of the monocline and the greatest uplift. The crustal-scale fault-related fold model may explain structural features seen in other areas of basement-involved foreland deformation.

  8. Flanking magnitudes: dissociation between numerosity and numerical value in a selective attention task.

    PubMed

    Naparstek, Sharon; Safadi, Ziad; Lichtenstein-Vidne, Limor; Henik, Avishai

    2015-07-01

    The current research examined whether peripherally presented numerical information can affect the speed of number processing. In 2 experiments, participants were presented with a target matrix flanked by a distractor matrix and were asked to perform a comparative judgment (i.e., decide whether the target was larger or smaller than the reference 5). In Experiment 1, the target was symbolic (i.e., a single digit), and in Experiment 2, it was nonsymbolic (i.e., a random presentation of dots). In both experiments, flanker matrices had 2 dimensions-numerosity and numerical value-that were manipulated orthogonally to create stimulus congruent and stimulus incongruent conditions. Incongruent trials differed in the laterality between target and flanker (i.e., their location in relation to the reference 5). When responding to symbolic targets (Experiment 1), only the flanker's numerical value affected reaction times (RTs), whereas when responding to nonsymbolic targets (Experiment 2), only the flanker's numerosity affected RTs. In addition, the pattern of flanker interference differed between targets: For symbolic targets, laterality did not affect responses, whereas for nonsymbolic targets, laterality did affect responses. These results imply both symbolic and nonsymbolic magnitudes can be automatically activated; however, this activation is contingent upon their relevance to the task at hand. Implications of these results on the efficiency of the visual processing system and on numerical cognition are further discussed.

  9. Physical and chemical properties of submarine basaltic rocks from the submarine flanks of the Hawaiian Islands

    USGS Publications Warehouse

    Yokose, H.; Lipman, P.W.; Kanamatsu, T.

    2005-01-01

    To evaluate physical and chemical diversity in submarine basaltic rocks, approximately 280 deep submarine samples recovered by submersibles from the underwater flanks of the Hawaiian Islands were analyzed and compared. Based on observations from the submersibles and hand specimens, these samples were classified into three main occurrence types (lavas, coarse-grained volcaniclastic rocks, and fine-grained sediments), each with several subtypes. The whole-rock sulfur content and porosity in submarine basaltic rocks, recovered from depths greater than 2000 m, range from < 10 ppm and 2 vol.% to 2200 ppm and 47 vol.%, respectively. These wide variations cannot be due just to different ambient pressures at the collection depths, as inferred previously for submarine erupted lavas. The physical and chemical properties of the recovered samples, especially a combination of three whole-rock parameters (Fe-oxidation state, Sulfur content, and Porosity), are closely related to the occurrence type. The FSP triangular diagram is a valuable indicator of the source location of basaltic fragments deposited in deep submarine areas. This diagram can be applied to basaltic rocks such as clasts in debris-flow deposits, submarine-emplaced lava flows that may have crossed the shoreline, and slightly altered geological samples. ?? 2005 Elsevier B.V. All rights reserved.

  10. An INDEL polymorphism at the X-STR GATA172D05 flanking region.

    PubMed

    Rodrigues, Elzemar Martins Ribeiro; dos Santos, Ney Pereira Carneiro; dos Santos, Andrea Kely Campos Ribeiro; Marinho, Anderson Nonato; Zago, Marco Antonio; Gomes, Iva; Amorim, António; Gusmão, Leonor; dos Santos, Sidney Emanuel Batista

    2009-01-01

    A new polymorphic INDEL was detected at the X-STR GATA172D05 flanking region, which corresponds to an 18-bp deletion, 141 bp upstream the TAGA repeat motif. This INDEL was found to be polymorphic in different population samples from Native Americans, Africans, and Europeans as well as in an admixed population from the Amazonia (Belém). Gene diversities varied between 37.5% in Native Americans and 49.9% in Africans. Comparison between human and chimpanzee sequences showed that the ancestral state corresponds to the presence of two copies of 18 bp, detected in both species; and the mutated allele has lost one of these two copies. The simultaneous analysis of the short tandem repeat (STR) and INDEL variation showed an association between the INDEL ancestral allele with the shorter STR alleles. High diversities were found in all population groups when combining the information provided by the INDEL and STR variation. Gene diversities varied between 76.7% in Native Americans and 80.6% in both Portugal and Belém.

  11. Seismic detection of a low-velocity layer beneath the southeast flank of Mauna Loa, Hawaii

    SciTech Connect

    Thurber, C.H.; Li, Yingping ); Johnson, C.

    1989-07-01

    The authors have identified seismic phases reflected off the top and bottom of a low velocity layer (LVL) by analysis of seismograms from six small earthquakes in Hawaii. These events occurred almost directly beneath station AIN of the Hawaiian Volcano Observatory (HVO) seismic network, located within the Kaoiki seismic zone on the southeast flank of Mauna Loa. The polarity reversals of the first reflected phases provide clear evidence for the existence of a LVL beneath this station. The LVL is estimated to be at a depth of about 11.5 km, with a thickness of about 800 m. The estimated depth to the top of the LVL is consistent with the depth distribution of low-angle thrust faulting events from the aftershock sequence of the 1983 Kaoiki earthquake. Presumably, this zone is the marine sediment layer buried beneath the volcanic pile, along which the volcanic edifice may slip easily to cause large earthquakes. Mapping the interface between the volcanic pile and oceanic crust and thus determining the depth and thickness of the buried sediment layer is essential for understanding the tectonics of large earthquakes in Hawaii.

  12. Novel microbial assemblages inhabiting crustal fluids within mid-ocean ridge flank subsurface basalt.

    PubMed

    Jungbluth, Sean P; Bowers, Robert M; Lin, Huei-Ting; Cowen, James P; Rappé, Michael S

    2016-08-01

    Although little is known regarding microbial life within our planet's rock-hosted deep subseafloor biosphere, boreholes drilled through deep ocean sediment and into the underlying basaltic crust provide invaluable windows of access that have been used previously to document the presence of microorganisms within fluids percolating through the deep ocean crust. In this study, the analysis of 1.7 million small subunit ribosomal RNA genes amplified and sequenced from marine sediment, bottom seawater and basalt-hosted deep subseafloor fluids that span multiple years and locations on the Juan de Fuca Ridge flank was used to quantitatively delineate a subseafloor microbiome comprised of distinct bacteria and archaea. Hot, anoxic crustal fluids tapped by newly installed seafloor sampling observatories at boreholes U1362A and U1362B contained abundant bacterial lineages of phylogenetically unique Nitrospirae, Aminicenantes, Calescamantes and Chloroflexi. Although less abundant, the domain Archaea was dominated by unique, uncultivated lineages of marine benthic group E, the Terrestrial Hot Spring Crenarchaeotic Group, the Bathyarchaeota and relatives of cultivated, sulfate-reducing Archaeoglobi. Consistent with recent geochemical measurements and bioenergetic predictions, the potential importance of methane cycling and sulfate reduction were imprinted within the basalt-hosted deep subseafloor crustal fluid microbial community. This unique window of access to the deep ocean subsurface basement reveals a microbial landscape that exhibits previously undetected spatial heterogeneity.

  13. Mapping the fluid flow of the Mariana Mounds ridge flank hydrothermal system: Pore water chemical tracers

    SciTech Connect

    Wheat, C.G.; McDuff, R.E.

    1995-05-10

    The authors present a conceptual model of fluid circulation in a ridge flank hydrothermal system, the Mariana Mounds. The model is based on chemical data from pore waters extracted from piston cores and from push cores collected by deep-sea research vessel Alvin in small, meter-sized mounds situated on a local topographic high. These mounds are located within a region of heat flow exceeding that calculated from a conductive model and are zones of strong pore water upflow. The authors have interpreted the chemical data with time-dependent transport-reaction models to estimate pore water velocities. In the mounds themselves pore water velocities reach several meters per year to kilometers per year. Within about 100 m from these zones of focused upflow velocities decrease to several centimeters per year up to tens of centimeters per year. A large area of low heat flow surrounds these heat flow and topographic highs, with upwelling pore water velocities less than 2 cm/yr. In some nearby cores, downwelling of bottom seawater is evident but at speeds less than 2 cm/yr. Downwelling through the sediments appears to be a minor source of seawater recharge to the basaltic basement. The authors conclude that the principal source of seawater recharge to basement is where basement outcrops exist, most likely a scarpt about 2-4 km to the east and southeast of the study area. 71 refs., 14 figs., 3 tabs.

  14. The 5'-flanking regions of three pea legumin genes: comparison of the DNA sequences.

    PubMed Central

    Lycett, G W; Croy, R R; Shirsat, A H; Richards, D M; Boulter, D

    1985-01-01

    Approximately 1200 nucleotides of sequence data from the promoter and 5'-flanking regions of each of three pea (Pisum sativum L.) legumin genes (legA, legB and legC) are presented. The promoter regions of all three genes were found to be identical including the "TATA box", and "CAAT box', and sequences showing homology to the SV40 enhancers. The legA sequence begins to diverge from the others about 300bp from the start codon, whereas the other two genes remain identical for another 550bp. The regions of partial homology exhibit deletions or insertions and some short, comparatively well conserved sequences. The significance of these features is discussed in terms of evolutionary mechanisms and their possible functional roles. The legC gene contains a region that may potentially form either of two mutually exclusive stem-loop structures, one of which has a stem 42bp long, which suggests that it could be fairly stable. We suggest that a mechanism of switching between such alternative structures may play some role in gene control or may represent the insertion of a transposable element. PMID:2997721

  15. Proteasomal degradation of ubiquitinated Insig proteins is determined by serine residues flanking ubiquitinated lysines

    PubMed Central

    Lee, Joon No; Gong, Yi; Zhang, Xiangyu; Ye, Jin

    2006-01-01

    Insig-1 and Insig-2 are closely related proteins of the endoplasmic reticulum that play crucial roles in cholesterol homeostasis by inhibiting excessive cholesterol synthesis and uptake. In sterol-depleted cells Insig-1 is degraded at least 15 times more rapidly than Insig-2, owing to ubiquitination of Lys-156 and Lys-158 in Insig-1. In this study, we use domain-swapping methods to localize amino acid residues responsible for this differential degradation. In the case of Insig-2, Glu-214 stabilizes the protein by preventing ubiquitination. When Glu-214 is changed to alanine, Insig-2 becomes ubiquitinated, but it is still not degraded as rapidly as ubiquitinated Insig-1. The difference in the degradation rates is traced to two amino acids: Ser-149 in Insig-1 and Ser-106 in Insig-2. Ser-149, which lies NH2-terminal to the ubiquitination sites, accelerates the degradation of ubiquitinated Insig-1. Ser-106, which is COOH-terminal to the ubiquitination sites, retards the degradation of ubiquitinated Insig-2. The current studies indicate that the degradation of ubiquitinated Insigs is controlled by serine residues flanking the sites of ubiquitination. PMID:16549805

  16. Microbial Inventory of Deeply Buried Oceanic Crust from a Young Ridge Flank

    PubMed Central

    Jørgensen, Steffen L.; Zhao, Rui

    2016-01-01

    The deep marine biosphere has over the past decades been exposed as an immense habitat for microorganisms with wide-reaching implications for our understanding of life on Earth. Recent advances in knowledge concerning this biosphere have been achieved mainly through extensive microbial and geochemical studies of deep marine sediments. However, the oceanic crust buried beneath the sediments, is still largely unexplored with respect to even the most fundamental questions related to microbial life. Here, we present quantitative and qualitative data related to the microbial inventory from 33 deeply buried basaltic rocks collected at two different locations, penetrating 300 vertical meters into the upper oceanic crust on the west flank of the Mid-Atlantic spreading ridge. We use quantitative PCR and sequencing of 16S rRNA gene amplicons to estimate cell abundances and to profile the community structure. Our data suggest that the number of cells is relatively stable at ~104 per gram of rock irrespectively of sampling site and depth. Further, we show that Proteobacteria, especially Gammaproteobacteria dominate the microbial assemblage across all investigated samples, with Archaea, in general, represented by < 1% of the community. In addition, we show that the communities within the crust are distinct from the overlying sediment. However, many of their respective microbial inhabitants are shared between the two biomes, but with markedly different relative distributions. Our study provides fundamental information with respect to abundance, distribution, and identity of microorganisms in the upper oceanic crust. PMID:27303398

  17. Genetic analysis of the fragile-X mental retardation syndrome with two flanking polymorphic DNA markers

    SciTech Connect

    Oberle, I.; Heilig, R.; Moisan, J.P.; Kloepfer, C.; Mattei, M.G.; Mattei, J.F.; Boue, J.; Froster-Iskenius, U.; Jacobs, P.A.; Lathrop, G.M.; Lalouel, J.M.

    1986-02-01

    The fragile-X mental retardation syndrome, one of the most prevalent chromosome X-linked diseases (approx. = 1 of 2000 newborn males), is characterized by the presence in affected males and in a portion of carrier females of a fragile site at chromosome band Xq27. The authors have performed a linkage analysis in 16 families between the locus for the fragile-X syndrome, FRAXQ27, and two polymorphic DNA markers that correspond to the anonymous probe St14 and to the coagulation factor IX gene F9. The results indicate that the order of loci is centromere-F9-FRAXQ27-St14-Xqter. The estimate of the recombination fraction for the linkage F9-FRAXQ27 is 0.12 and 0.10 for FRAXQ27-St14. Recombination between St14 and F9 does not appear to be significantly different in normal and fragile-X families. The two flanking probes were used for diagnosis of the carrier state and for detection of transmission of the disease through phenotypically normal males. They should also allow first-trimester diagnosis with a reliability of about 98% in 40% of the families. Used in conjunction with the cytogenetic analysis, the segregation studies with both probes should improve the genetic counseling for the fragile-X syndrome and should be useful for the formal genetic analysis of this unique disease.

  18. Duplicative activation mechanisms of two trypanosome telomeric VSG genes with structurally simple 5' flanks.

    PubMed

    Matthews, K R; Shiels, P G; Graham, S V; Cowan, C; Barry, J D

    1990-12-25

    In the mammalian bloodstream, African trypanosomes express variant surface glycoprotein (VSG) genes from a family of long and complex telomeric expression sites. VSG switching generally occurs by the duplication of different VSG genes into these sites by gene conversion involving a series of 70 base pair (70bp) repeats in the 5' flank. In contrast, when VSG is first synthesised by trypanosomes in the tsetse fly at the metacyclic stage, a separate set of telomeric expression sites is activated. These latter telomeres appear not to act as recipients in gene conversion. We have found that the structure of two such expression sites is simple, with very short 70bp repeat regions and very little other sequence in common with bloodstream expression sites. However, the two telomeres readily act as donors in VSG gene conversion in the bloodstream and we show for one a consistent association of the conversion 5' end point with the short 70bp repeat region. These findings help explain why a very predictable set of VSGs is expressed in the tsetse fly and have implications for VSG gene conversion mechanisms.

  19. Petrology of parasitic and eccentric cones on the flanks and base of Somma-Vesuvius

    NASA Astrophysics Data System (ADS)

    Macdonald, Ray; Bagiński, Bogusław; Rolandi, Giuseppe; De Vivo, Benedetto; Kopczyńska, Anna

    2016-02-01

    Parasitic and eccentric cones on the flanks and at the base of Somma-Vesuvius potentially provide information on the plumbing system of the complex. We present geochemical data for minerals, glasses and rocks from the Pollena and Cercola cones. The rocks are phonotephrites and a basaltic trachyandesite. A volumetrically dominant type contains phenocrysts of olivine, clinopyroxene, leucite, plagioclase ± apatite ± Fe-Ti-oxides. A second type is phlogopite-phyric. Low magnesium-numbers (62-49) and Ni abundances (≤32 ppm) indicate that the primary magmas underwent crustal-level fractionation but the cores of olivine and clinopyroxene phenocrysts carry records of the parental magmas. Geochemical data indicate that the rocks form more than one magmatic lineage. Matrix glasses point to low-pressure fractionation trends towards decreasing melt silica-undersaturation. The phlogopite-phyric rocks were derived from more hydrous magmas than those lacking phlogopite phenocrysts, perhaps at higher pressures. Phenocryst assemblages are difficult to reconcile with published experimental work and it is likely that they are far from equilibrium assemblages. The cone magmas were probably derived from high levels within the main plumbing system via lateral transport.

  20. Splicing of COB intron 5 requires pairing between the internal guide sequence and both flanking exons.

    PubMed

    Partono, S; Lewin, A S

    1990-11-01

    Group I introns are characterized by a set of conserved sequence elements and secondary structures. Evidence supporting the pairing of certain of these sequences has come from the comparison of intron sequences and from the analysis of mutations that disrupt splicing by interfering with pairing. One of the structures proposed for all group I introns is an internal guide sequence that base pairs with the upstream and the downstream exons, bringing them into alignment for ligation. We made specific mutations in the internal guide sequence and the flanking exons of the fifth intron in the yeast mitochondrial gene for apocytochrome b (COB). Mutations that disrupted the pairing between the internal guide sequence and the upstream exon (the P1 pairing) blocked addition of guanosine to the 5' end of the intron during autocatalytic reactions and prevented formation of the full-length circular intron. In contrast, transcripts containing mutations that disrupted the pairing between the guide sequence and the downstream exon (the P10 helix) initiated splicing but failed to ligate exons. Compensatory mutations that restored helices of normal stability mitigated the effects of the original mutations. These data provide direct evidence for the importance of the base pairing between the internal guide sequence and the downstream exon in the splicing of a wild-type group I intron.