Science.gov

Sample records for added mass coefficients

  1. The added mass, Basset, and viscous drag coefficients in nondilute bubbly liquids undergoing small-amplitude oscillatory motion

    SciTech Connect

    Sangani, A.S. ); Zhang, D.Z.; Prosperetti, A. )

    1991-12-01

    The motion of bubbles dispersed in a liquid when a small-amplitude oscillatory motion is imposed on the mixture is examined in the limit of small frequency and viscosity. Under these conditions, for bubbles with a stress-free surface, the motion can be described in terms of added mass and viscous force coefficients. For bubbles contaminated with surface-active impurities, the introduction of a further coefficient to parametrize the Basset force is necessary. These coefficients are calculated numerically for random configurations of bubbles by solving the appropriate multibubble interaction problem exactly using a method of multipole expansion. Results obtained by averaging over several configurations are presented. Comparison of the results with those for periodic arrays of bubbles shows that these coefficients are, in general, relatively insensitive to the detailed spatial arrangement of the bubbles. On the basis of this observation, it is possible to estimate them via simple formulas derived analytically for dilute periodic arrays. The effect of surface tension and density of bubbles (or rigid particles in the case where the no-slip boundary condition is applicable) is also examined and found to be rather small.

  2. The generalized added mass revised

    NASA Astrophysics Data System (ADS)

    De Wilde, Juray

    2007-05-01

    The reformulation of the generalized or apparent added mass presented by De Wilde [Phys. Fluids 17, 113304 (2005)] neglects the presence of a drag-type force in the gas and solid phase momentum equations. Reformulating the generalized added mass accounting for the presence of a drag-type force, an apparent drag force appears next to the apparent distribution of the filtered gas phase pressure gradient over the phases already found by De Wilde in the above-cited reference. The reformulation of the generalized added mass and the evaluation of a linear wave propagation speed test then suggest a generalized added mass type closure approach to completely describe filtered gas-solid momentum transfer, that is, including both the filtered drag force and the correlation between the solid volume fraction and the gas phase pressure gradient.

  3. Added mass in human swimmers: age and gender differences.

    PubMed

    Caspersen, Cecilie; Berthelsen, Petter A; Eik, Mari; Pâkozdi, Csaba; Kjendlie, Per-Ludvik

    2010-08-26

    In unstationary swimming (changing velocity), some of the water around the swimmer is set in motion. This can be thought of as an added mass (M(a)) of water. The purpose of this study was to find added mass on human swimmers and investigate the effect of shape and body size. Thirty subjects were connected to a 2.8m long bar with handles, attached with springs (stiffness k = 318 N/m) and a force cell. By oscillating this system vertically and registering the period of oscillations it was possible to find the added mass of the swimmer, given the known masses of the bar and swimmer. Relative added mass (M(a)%) for boys, women and men were, respectively, 26.8 +/- 2.9%, 23.6 +/- 1.6% and 26.8 +/- 2.3% of the subjects total mass. This study reported significantly lower added mass (p < 0.001) and relative added mass (p < 0.002) for women compared to men, which indicate that the possible body shape differences between genders may be an important factor for determining added mass. Boys had significantly lower (p < 0.001) added mass than men. When added mass was scaled for body size there were no significant differences (p = 0.996) between boys and men, which indicated that body size is an important factor that influences added mass. The added mass in this study seems to be lower and within a smaller range than previously reported (Klauck, 1999; Eik et al., 2008). It is concluded that the added mass in human swimmers, in extended gliding position, is approximately 1/4 of the subjects' body mass.

  4. Added mass and damping on an oscillating surface-piercing circular column with a circular footing

    SciTech Connect

    Chung, J.S.

    1994-12-31

    Added mass and damping on a vertical, surface-piercing, circular cylinder or column with a submerged sharp-cornered circular floating, oscillating in water of finite and infinite depths are measured using a planar motion mechanism. The model is made of aluminum, and the outer diameters of the column and footing are 26.67 cm and 60.96 cm, and their lengths are 90.17 cm and 22.86 cm, respectively. The bodies were forced to oscillate sinusoidally with small amplitudes, for several submergences below a free surface. The added-mass and wave-damping coefficients are shown to be influenced strongly by the free-surface effect and are presented as a function of water depth, frequency and direction of oscillation and of depth of submergence from the free surface. For the vertical oscillation close to the free surface, negative added mass values are measured, and the predictions of the added mass by a 3-D diffraction theory are 10--20% lower than the experimental values at the model submergences tested. The experimental added mass coefficient values for the horizontal oscillation and the wave damping coefficients for the vertical oscillation in finite depth differ more than 100% from the corresponding 3-D theory prediction at a certain at-sea operational frequency range. This set of data provides further experimental information for the improvement of theoretical predictions.

  5. Overall Heat and Mass Transfer Coefficient of Water Vapor Adsorption

    NASA Astrophysics Data System (ADS)

    Hamamoto, Yoshinori; Mori, Hideo; Godo, Masazumi; Miura, Kunio; Watanabe, Yutaka; Ishizawa, Toshihiko; Takatsuka, Takeshi

    A fundamental investigation was performed to develop a compact and simple desiccant ventilation unit which is one of the main components of a novel energy saving air-conditioning system. Water vapor in the air is adsorbed and/or desorbed to be controlled the humidity of supply air through a unit of an adsorbent rotor. A numerical simulation helps to understand the phenomena of heat and mass transfer in the rotor block. Overall transfer coefficients were estimated by performing both experiment and calculation. It was examined that the transient overall equivalent heat and mass transfer coefficient was not constant. It seems that both film fluid and diffusion resistance govern the coefficients in the block, and the influence of air flow on the time averaged coefficients is estimated by a considering the laminar forced convection from a flat plate. There is little difference of the coefficient between adsorption and desorption process. The correlation and fitting parameters are presented for prediction of the overall heat and mass transfer coefficients. The estimation accuracy was improved.

  6. Mass transfer coefficients determination from linear gradient elution experiments.

    PubMed

    Pfister, David; Morbidelli, Massimo

    2015-01-02

    A procedure to estimate mass transfer coefficients in linear gradient elution chromatography is presented and validated by comparison with experimental data. Mass transfer coefficients are traditionally estimated experimentally through the van Deemter plot, which represents the HETP as a function of the fluid velocity. Up to now, the HETP was obtained under isocratic elution conditions. Unfortunately, isocratic elution experiments are often not suitable for large biomolecules which suffer from severe mass transfer hindrances. Yamamoto et al. were the first to propose a semi-empirical equation to relate HETPs measured from linear gradient elution experiments to those obtained under isocratic conditions [7]. Based on his pioneering work, the approach presented in this work aims at providing an experimental procedure supported by simple equations to estimate reliable mass transfer parameters from linear gradient elution chromatographic experiments. From the resolution of the transport model, we derived a rigorous analytical expression for the HETP in linear gradient elution chromatography.

  7. Dissociation and Mass Transfer Coefficients for Ammonia Volatilization Models

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Process-based models are being used to predict ammonia emissions from manure sources, but their accuracy has not been fully evaluated for cattle manure. Laboratory trials were conducted to measure the dissociation and mass transfer coefficients for ammonia volatilization from media of buffered ammon...

  8. Metabolic rate of carrying added mass: a function of walking speed, carried mass and mass location.

    PubMed

    Schertzer, Eliran; Riemer, Raziel

    2014-11-01

    The effort of carrying additional mass at different body locations is important in ergonomics and in designing wearable robotics. We investigate the metabolic rate of carrying a load as a function of its mass, its location on the body and the subject's walking speed. Novel metabolic rate prediction equations for walking while carrying loads at the ankle, knees and back were developed based on experiments where subjects walked on a treadmill at 4, 5 or 6km/h bearing different amounts of added mass (up to 2kg per leg and 22kg for back). Compared to previously reported equations, ours are 7-69% more accurate. Results also show that relative cost for carrying a mass at a distal versus a proximal location changes with speed and mass. Contrary to mass carried on the back, mass attached to the leg cannot be modeled as an increase in body mass.

  9. Pendulum mass affects the measurement of articular friction coefficient.

    PubMed

    Akelman, Matthew R; Teeple, Erin; Machan, Jason T; Crisco, Joseph J; Jay, Gregory D; Fleming, Braden C

    2013-02-01

    Friction measurements of articular cartilage are important to determine the relative tribologic contributions made by synovial fluid or cartilage, and to assess the efficacy of therapies for preventing the development of post-traumatic osteoarthritis. Stanton's equation is the most frequently used formula for estimating the whole joint friction coefficient (μ) of an articular pendulum, and assumes pendulum energy loss through a mass-independent mechanism. This study examines if articular pendulum energy loss is indeed mass independent, and compares Stanton's model to an alternative model, which incorporates viscous damping, for calculating μ. Ten loads (25-100% body weight) were applied in a random order to an articular pendulum using the knees of adult male Hartley guinea pigs (n=4) as the fulcrum. Motion of the decaying pendulum was recorded and μ was estimated using two models: Stanton's equation, and an exponential decay function incorporating a viscous damping coefficient. μ estimates decreased as mass increased for both models. Exponential decay model fit error values were 82% less than the Stanton model. These results indicate that μ decreases with increasing mass, and that an exponential decay model provides a better fit for articular pendulum data at all mass values. In conclusion, inter-study comparisons of articular pendulum μ values should not be made without recognizing the loads used, as μ values are mass dependent.

  10. Operation of the breeze tunnel to determine mass extinction coefficients

    SciTech Connect

    Sehmel, G.A.; Bonfante, R.; Catalano, E.; Rouse, W.G.; Banks, D.R.

    1993-06-01

    The breeze tunnel at the Edgewood Research, Development and Engineering Center (ERDEC) at Aberdeen Proving Ground, Maryland, is a unique facility for determining the efficacy of released smoke/obscurants in flowing air as a function of controlling variables. Optimum material feed characteristics and generator operating conditions can be determined. The facility allows investigation of the effects of different generator operating variables, airborne concentrations, and airborne particle sizes on mass extinction coefficients. The breeze tunnel is now available for Department of Defense (DoD) trials. During trials in the breeze tunnel, obscurants have been released from the compact-disc-generator, the IR-Log generator, and the XM56 generator. Obscurant release rates have ranged from an instantaneous puff to a continuous release of 10 lb/min. Extinction can be measured in the visual, infrared, and millimeter ranges of the electromagnetic spectrum. Experimental conditions allow calculation of mass extinction coefficients as a function of generator variables, including material release rates. Average mass extinction coefficients address attenuation from obscurants, both single primary particles and aggregates.

  11. Viral coefficient and hidden mass in the galaxy groups

    NASA Technical Reports Server (NTRS)

    Anosova, Joanna P.; Orlov, Victor V.; Kiseleva, Ljudmila G.

    1990-01-01

    The purpose is the verification of the virial mass estimations for small galaxy groups. The dynamical evolution of triple and quintuple galaxies was studied by the numerical simulations. The dependence of the virial coefficient k(t) versus time was derived. Initial k(O) = O. The function k(t) has some strong oscillations from 0.02 to 0.99. Generally, these oscillations are quasiperiodical ones. Such a behavior of k(t) is caused by formation in a system of close isolated temporary double subsystems. A strong correlation between the virial coefficient and the least mutual distance in the system is observed. Such wide oscillations may add into the estimation of virial mass of the galaxy groups an uncertainty of more than one order. An additional uncertainty is introduced by the projection effect. This uncertainty for the individual estimations of the masses approach three orders. Thus any individual estimation of the virial mass is impossible for small galaxy groups. Some possibility of statistical estimation (median or average) of the total mass, including a hidden mass, is shown for the homogeneous samples. The authors propose a method for these estimations based on a comparison of the medians of dynamical parameters (a mean size in projection and a dispersion of relative radial velocities) for the simulated and observed ensembles of the galaxy groups. This method has been applied to a sample of 46 probably physical triplets of galaxies. The probable median of the hidden mass in a volume of the triplet is about 4 M, where M is the total mass of visible matter.

  12. Saponification reaction system: a detailed mass transfer coefficient determination.

    PubMed

    Pečar, Darja; Goršek, Andreja

    2015-01-01

    The saponification of an aromatic ester with an aqueous sodium hydroxide was studied within a heterogeneous reaction medium in order to determine the overall kinetics of the selected system. The extended thermo-kinetic model was developed compared to the previously used simple one. The reaction rate within a heterogeneous liquid-liquid system incorporates a chemical kinetics term as well as mass transfer between both phases. Chemical rate constant was obtained from experiments within a homogeneous medium, whilst the mass-transfer coefficient was determined separately. The measured thermal profiles were then the bases for determining the overall reaction-rate. This study presents the development of an extended kinetic model for considering mass transfer regarding the saponification of ethyl benzoate with sodium hydroxide within a heterogeneous reaction medium. The time-dependences are presented for the mass transfer coefficient and the interfacial areas at different heterogeneous stages and temperatures. The results indicated an important role of reliable kinetic model, as significant difference in k(L)a product was obtained with extended and simple approach.

  13. Higgs mechanism and the added-mass effect.

    PubMed

    Krishnaswami, Govind S; Phatak, Sachin S

    2015-04-08

    In the Higgs mechanism, mediators of the weak force acquire masses by interacting with the Higgs condensate, leading to a vector boson mass matrix. On the other hand, a rigid body accelerated through an inviscid, incompressible and irrotational fluid feels an opposing force linearly related to its acceleration, via an added-mass tensor. We uncover a striking physical analogy between the two effects and propose a dictionary relating them. The correspondence turns the gauge Lie algebra into the space of directions in which the body can move, encodes the pattern of gauge symmetry breaking in the shape of an associated body and relates symmetries of the body to those of the scalar vacuum manifold. The new viewpoint is illustrated with numerous examples, and raises interesting questions, notably on the fluid analogues of the broken symmetry and Higgs particle, and the field-theoretic analogue of the added mass of a composite body.

  14. Higgs mechanism and the added-mass effect

    PubMed Central

    Krishnaswami, Govind S.; Phatak, Sachin S.

    2015-01-01

    In the Higgs mechanism, mediators of the weak force acquire masses by interacting with the Higgs condensate, leading to a vector boson mass matrix. On the other hand, a rigid body accelerated through an inviscid, incompressible and irrotational fluid feels an opposing force linearly related to its acceleration, via an added-mass tensor. We uncover a striking physical analogy between the two effects and propose a dictionary relating them. The correspondence turns the gauge Lie algebra into the space of directions in which the body can move, encodes the pattern of gauge symmetry breaking in the shape of an associated body and relates symmetries of the body to those of the scalar vacuum manifold. The new viewpoint is illustrated with numerous examples, and raises interesting questions, notably on the fluid analogues of the broken symmetry and Higgs particle, and the field-theoretic analogue of the added mass of a composite body. PMID:27547077

  15. Creating images by adding masses to gravitational point lenses

    NASA Astrophysics Data System (ADS)

    Sète, Olivier; Luce, Robert; Liesen, Jörg

    2015-04-01

    A well-studied maximal gravitational point lens construction of S. H. Rhie produces images of a light source using deflector masses. The construction arises from a circular, symmetric deflector configuration on masses (producing only images) by adding a tiny mass in the center of the other mass positions (and reducing all the other masses a little bit). In a recent paper we studied this "image creating effect" from a purely mathematical point of view (Sète, Luce & Liesen, Comput. Methods Funct. Theory 15(1), 2014). Here we discuss a few consequences of our findings for gravitational microlensing models. We present a complete characterization of the effect of adding small masses to these point lens models, with respect to the number of images. In particular, we give several examples of maximal lensing models that are different from Rhie's construction and that do not share its highly symmetric appearance. We give generally applicable conditions that allow the construction of maximal point lenses on masses from maximal lenses on masses.

  16. Octopus-inspired drag cancelation by added mass pumping

    NASA Astrophysics Data System (ADS)

    Weymouth, Gabriel; Giorgio-Serchi, Francesco

    2016-11-01

    Recent work has shown that when an immersed body suddenly changes its size, such as a deflating octopus during rapid escape jetting, the body experiences large forces due to the variation of added-mass energy. We extend this line of research by investigating a spring-mass oscillator submerged in quiescent fluid subject to periodic changes in its volume. This system isolates the ability of the added-mass thrust to cancel the bluff body resistance (having no jet flow to confuse the analysis) and moves closer to studying how these effects would work in a sustained propulsion case by studying periodic shape-change instead of a "one-shot" escape maneuver. With a combination of analytical, numerical, and experimental results, we show that the recovery of added-mass kinetic energy can be used to completely cancel the drag of the fluid, driving the onset of sustained oscillations with amplitudes as large as four times the average body radius. Moreover, these results are fairly independent of the details of the shape-change kinematics as long as the Stokes number and shape-change number are large. In addition, the effective pumping frequency range based on parametric oscillator analysis is shown to predict large amplitude response region observed in the numerics and experiments.

  17. Proposed Framework for Determining Added Mass of Orion Drogue Parachutes

    NASA Technical Reports Server (NTRS)

    Fraire, Usbaldo, Jr.; Dearman, James; Morris, Aaron

    2011-01-01

    The Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS) project is executing a program to qualify a parachute system for a next generation human spacecraft. Part of the qualification process involves predicting parachute riser tension during system descent with flight simulations. Human rating the CPAS hardware requires a high degree of confidence in the simulation models used to predict parachute loads. However, uncertainty exists in the heritage added mass models used for loads predictions due to a lack of supporting documentation and data. Even though CPAS anchors flight simulation loads predictions to flight tests, extrapolation of these models outside the test regime carries the risk of producing non-bounding loads. A set of equations based on empirically derived functions of skirt radius is recommended as the simplest and most viable method to test and derive an enhanced added mass model for an inflating parachute. This will increase confidence in the capability to predict parachute loads. The selected equations are based on those published in A Simplified Dynamic Model of Parachute Inflation by Dean Wolf. An Ames 80x120 wind tunnel test campaign is recommended to acquire the reefing line tension and canopy photogrammetric data needed to quantify the terms in the Wolf equations and reduce uncertainties in parachute loads predictions. Once the campaign is completed, the Wolf equations can be used to predict loads in a typical CPAS Drogue Flight test. Comprehensive descriptions of added mass test techniques from the Apollo Era to the current CPAS project are included for reference.

  18. Value-added logistics: the answer to mass customization.

    PubMed

    Verwoerd, W

    1999-11-01

    Value added logistics: A new concept or just new terminology? If you read Today and Tomorrow you will notice that Henry Ford used postponed manufacturing to save on transportation costs: On one railway-wagon he could ship either three T-Fords or the parts for seven T-Fords. This is one of the reasons he build several assembly plants in the United States and in Europe (Dagenham, UK; Koln, Germany; and Amsterdam). Although this concept has existed for more than 70 years, I found out that it is still quite unknown. Thanks to information technology, it is becoming more powerful. This opens large possibilities for mass customization.

  19. An experimental and numerical study of heave added mass and damping of horizontally submerged and perforated rectangular plates

    NASA Astrophysics Data System (ADS)

    An, Song; Faltinsen, Odd M.

    2013-05-01

    Forced harmonic heave motions of horizontally submerged and perforated rectangular plates are studied experimentally and numerically at both a deep and shallow submergence. The steady-state vertical forces are expressed in terms of added mass and damping coefficients. The numerical results are partly obtained by combining potential flow with linear free-surface conditions and a nonlinear viscous pressure loss condition at the mean oscillatory plate position. A domain decomposition technique is applied with a boundary element method in the inner domain and an analytical representation of the velocity potential in the outer domain. A drag term accounts for the vortex shedding at the outer plate edges. The numerically predicted Keulegan-Carpenter number dependent heave added mass and damping coefficients agree reasonably with experimental values, in particular for the deeper submergence.

  20. Isotopic mass-dependence of noble gas diffusion coefficients inwater

    SciTech Connect

    Bourg, I.C.; Sposito, G.

    2007-06-25

    Noble gas isotopes are used extensively as tracers inhydrologic and paleoclimatic studies. These applications requireknowledge of the isotopic mass (m) dependence of noble gas diffusioncoefficients in water (D), which has not been measured but is estimatedusing experimental D-values for the major isotopes along with an untestedrelationship from kinetic theory, D prop m-0.5. We applied moleculardynamics methods to determine the mass dependence of D for four noblegases at 298 K, finding that D prop m-beta with beta<0.2, whichrefutes the kinetic theory model underlying all currentapplications.

  1. THE MASS ACCOMMODATION COEFFICIENT OF AMMONIUM NITRATE AEROSOL. (R823514)

    EPA Science Inventory

    The mass transfer rate of pure ammonium nitrate between the aerosol and gas phases was
    quantified experimentally by the use of the tandem differential mobility analyzer/scanning mobility
    particle sizer (TDMA/SMPS) technique. Ammonium nitrate particles 80-220 nm in diameter<...

  2. Curvature dependence of the interfacial heat and mass transfer coefficients

    NASA Astrophysics Data System (ADS)

    Glavatskiy, K. S.; Bedeaux, D.

    2014-03-01

    Nucleation is often accompanied by heat transfer between the surroundings and a nucleus of a new phase. The interface between two phases gives an additional resistance to this transfer. For small nuclei the interfacial curvature is high, which affects not only equilibrium quantities such as surface tension, but also the transport properties. In particular, high curvature affects the interfacial resistance to heat and mass transfer. We develop a framework for determining the curvature dependence of the interfacial heat and mass transfer resistances. We determine the interfacial resistances as a function of a curvature. The analysis is performed for a bubble of a one-component fluid and may be extended to various nuclei of multicomponent systems. The curvature dependence of the interfacial resistances is important in modeling transport processes in multiphase systems.

  3. Molar Mass and Second Virial Coefficient of Polyethylene Glycol by Vapor Pressure Osmometry

    ERIC Educational Resources Information Center

    Schwinefus, Jeffrey J.; Checkal, Caleb; Saksa, Brian; Baka, Nadia; Modi, Kalpit; Rivera, Carlos

    2015-01-01

    In this laboratory experiment, students determine the number-average molar masses and second virial coefficients of polyethylene glycol (PEG) polymers ranging in molar mass from 200 to 1500 g mol[superscript -1] using vapor pressure osmometry (VPO). Students assess VPO in relation to accurate molar mass calculations of PEG polymers. Additionally,…

  4. Thermo-mechanical phase-shift determination in Coriolis mass-flowmeters with added masses

    NASA Astrophysics Data System (ADS)

    Ghayesh, Mergen H.; Amabili, Marco; Païdoussis, Michael P.

    2012-10-01

    The aim of this paper is to develop an approximate analytical solution for phase-shift (and thus mass flow) prediction along the length of the measuring tube of a Coriolis mass-flowmeter. A single, straight measuring tube is considered; added masses at the sensor and excitation locations are included in the model, and thus in the equation of motion. The measuring tube is excited harmonically by an electromagnetic driver. Taking into account thermal effects, the equation of motion is derived through use of the extended Hamilton's principle and constitutive relations. The equation of motion is discretized into a set of ordinary differential equations via Galerkin's technique. The method of multiple timescales is applied to the set of resultant equations, and the equations of order one and epsilon are obtained analytically for the system at primary resonance. The solution of the equation of motion is obtained by satisfying the solvability condition (making the solution of order epsilon free of secular terms). The flow-related phase-shift in the driver-induced tube vibration is measured at two symmetrically located points on either side of the mid-length of the tube. The analytical results for the phase-shift are compared to those obtained numerically. The effect of system parameters on the measured phase-shift is discussed. It is shown that the measured phase-shift depends on the mass flow rate, of course, but it is also affected by the magnitude of the added sensor mass and location, and the temperature change; nevertheless, the factors investigated do not induce a zero phase-shift.

  5. OVERALL MASS TRANSFER COEFFICIENT FOR POLLUTANT EMISSIONS FROM SMALL WATER POOLS UNDER SIMULATED INDOOR ENVIRONMENTAL CONDITIONS

    EPA Science Inventory

    Small chamber tests were conducted to experimentally determine the overall mass transfer coefficient for pollutant emissions from still water under simulated indoor-residential or occupational-environmental conditions. Fourteen tests were conducted in small environmental chambers...

  6. A method for determination mass absorption coefficient of gamma rays by Compton scattering.

    PubMed

    El Abd, A

    2014-12-01

    A method was proposed for determination mass absorption coefficient of gamma rays for compounds, alloys and mixtures. It is based on simulating interaction processes of gamma rays with target elements having atomic numbers from Z=1 to Z=92 using the MCSHAPE software. Intensities of Compton scattered gamma rays at saturation thicknesses and at a scattering angle of 90° were calculated for incident gamma rays of different energies. The obtained results showed that the intensity of Compton scattered gamma rays at saturations and mass absorption coefficients can be described by mathematical formulas. These were used to determine mass absorption coefficients for compound, alloys and mixtures with the knowledge of their Compton scattered intensities. The method was tested by calculating mass absorption coefficients for some compounds, alloys and mixtures. There is a good agreement between obtained results and calculated ones using WinXom software. The advantages and limitations of the method were discussed.

  7. Mass effect on the Soret coefficient in n-alkane mixtures

    SciTech Connect

    Alonso de Mezquia, David; Mounir Bou-Ali, M.; Madariaga, J. Antonio; Santamaría, Carlos

    2014-02-28

    We have determined the Soret coefficient of different equimolar and non equimolar n-alkane mixtures from measurements of the molecular diffusion and thermal diffusion coefficients. It is shown that equimolar mixtures behave as isotopic-like mixtures in which only the mass effect contributes to the Soret effect. In non equimolar mixtures, a small linear dependence with the molar fraction is observed. Finally, we have obtained a new correlation, which allows the determination of the Soret coefficient of n-alkane mixtures using the data of viscosity, the thermal expansion coefficient of the pure components, and the density of the equimolar mixture.

  8. Photon mass energy transfer coefficients for elements z=1 to 92 and 48 additional substances of dosimetric interest.

    PubMed

    Kato, Hideki

    2014-07-01

    Photon mass energy transfer coefficient is an essential factor when converting photon energy fluence into kinetic energy released per unit mass (kerma). Although mass attenuation coefficient and mass energy absorption coefficients can be looked up in databases, the mass energy transfer coefficient values are still controversial. In this paper, the photon mass energy transfer coefficients for elements Z=1-92 were calculated based on cross-sectional data for each photon interaction type. Mass energy transfer coefficients for 48 compounds and/or mixtures of dosimetric interest were calculated from coefficient data for elements using Bragg's additivity rule. We additionally developed software that can search these coefficient data for any element or substance of dosimetric interest. The database and software created in this paper should prove useful for radiation measurements and/or dose calculations.

  9. Calculation of Mass Transfer Coefficients in a Crystal Growth Chamber through Heat Transfer Measurements

    SciTech Connect

    Bell, J H; Hand, L A

    2005-04-21

    The growth rate of a crystal in a supersaturated solution is limited by both reaction kinetics and the local concentration of solute. If the local mass transfer coefficient is too low, concentration of solute at the crystal-solution interface will drop below saturation, leading to a defect in the growing crystal. Here, mass transfer coefficients are calculated for a rotating crystal growing in a supersaturated solution of potassium diphosphate (KDP) in water. Since mass transfer is difficult to measure directly, the heat transfer coefficient of a scale model crystal in water is measured using temperature-sensitive paint (TSP). To the authors' knowledge this is the first use of TSP to measure temperatures in water. The corresponding mass transfer coefficient is then calculated using the Chilton- Colburn analogy. Measurements were made for three crystal sizes at two running conditions each. Running conditions include periodic reversals of rotation direction. Heat transfer coefficients were found to vary significantly both across the crystal faces and over the course of a rotation cycle, but not from one face to another. Mean heat transfer coefficients increased with both crystal size and rotation rate. Computed mass transfer coefficients were broadly in line with expectations from the full-scale crystal growth experiments. Additional experiments show that continuous rotation of the crystal results in about a 30% lower heat transfer compared to rotation with periodic reversals. The continuous rotation case also shows a periodic variation in heat transfer coefficient of about 15%, with a period about 1/20th of the rotation rate.

  10. Rotational-Mode-Shape-Based Added Mass Identification Using Wavelet Packet Transform

    NASA Astrophysics Data System (ADS)

    Rajendran, Prakash; Sivakumar, Srinivasan M.

    2015-05-01

    A novel approach is proposed in this article that the combination of rotational mode shape with wavelet packet transform can detect the relatively small added mass (damage) location and its intensity in a beam structure. The rotational mode shapes of added mass state are obtained from a finite element model and used as input in wavelet analysis to capture signatures arising from even small damage in the beam. The proposed algorithm is able to clearly identify single and multiple added mass locations and their intensities in a cantilever beam. It is also tested with noise-contaminated signals to show its feasibility in practical situations.

  11. Studies on effective atomic numbers, electron densities and mass attenuation coefficients in Au alloys.

    PubMed

    Han, I; Demir, L

    2010-01-01

    The total mass attenuation coefficients (mu/rho) for pure Au and Au99Be1, Au88Ge12, Au95Zn5 alloys were measured at 59.5 and 88.0 keV photon energies. The samples were irradiated with 241Am and 109Cd radioactive point source using transmission arrangement. The gamma- rays were counted by a Si(Li) detector with resolution of 160 eV at 5.9 keV. Total atomic and electronic cross-sections (sigmat and sigmae), effective atomic and electron densities (Zeff and Nel) were determined using the obtained mass attenuation coefficients for investigated Au alloys. The theoretical mass attenuation coefficients of each alloy were estimated using mixture rule.

  12. Measurements of Soot Mass Absorption Coefficients from 300 to 660 nm

    NASA Astrophysics Data System (ADS)

    Renbaum-Wolff, Lindsay; Fisher, Al; Helgestad, Taylor; Lambe, Andrew; Sedlacek, Arthur; Smith, Geoffrey; Cappa, Christopher; Davidovits, Paul; Onasch, Timothy; Freedman, Andrew

    2016-04-01

    Soot, a product of incomplete combustion, plays an important role in the earth's climate system through the absorption and scattering of solar radiation. In particular, the assumed mass absorption coefficient (MAC) of soot and its variation with wavelength presents a significant uncertainty in the calculation of radiative forcing in global climate change models. As part of the fourth Boston College/Aerodyne soot properties measurement campaign, we have measured the mass absorption coefficient of soot produced by an inverted methane diffusion flame over a spectral range of 300-660 nm using a variety of optical absorption techniques. Extinction and absorption were measured using a dual cavity ringdown photoacoustic spectrometer (CRD-PAS, UC Davis) at 405 nm and 532 nm. Scattering and extinction were measured using a CAPS PMssa single scattering albedo monitor (Aerodyne) at 630 nm; the absorption coefficient was determined by subtraction. In addition, the absorption coefficients in 8 wavelength bands from 300 to 660 nm were measured using a new broadband photoacoustic absorption monitor (UGA). Soot particle mass was quantified using a centrifugal particle mass analyzer (CPMA, Cambustion), mobility size with a scanning mobility particle sizer (SMPS, TSI) and soot concentration with a CPC (Brechtel). The contribution of doubly charged particles to the sample mass was determined using a Single Particle Soot Photometer (DMT). Over a mass range of 1-8 fg, corresponding to differential mobility diameters of ~150 nm to 550 nm, the value of the soot MAC proved to be independent of mass for all wavelengths. The wavelength dependence of the MAC was best fit to a power law with an Absorption Ångstrom Coefficient slightly greater than 1.

  13. Extracting the effective mass of electrons in transparent conductive oxide thin films using Seebeck coefficient

    SciTech Connect

    Wang, Yaqin; Zhu, Junhao; Tang, Wu

    2014-05-26

    A method is proposed that combines Seebeck coefficient and carrier concentration to determine the electron effective mass of transparent conductive oxide (TCO) thin films. Experiments were conducted to test the validity of this approach on the transparent conductive Ga-doped ZnO thin films deposited by magnetron sputtering. An evident agreement of the calculated electron effective mass of the films is observed between the proposed approach and the previous studies. Besides, the optical carrier concentration and mobility derived from the calculated electron effective mass and spectroscopic ellipsometry using a complex dielectric function are consistent with those from direct Hall-effect measurement. The agreements suggest that Seebeck coefficient can serve as an alternative tool for extracting the effective mass of electrons in TCO films.

  14. Bioenergetic flux, mitochondrial mass and mitochondrial morphology dynamics in AD and MCI cybrid cell lines

    PubMed Central

    Silva, Diana F.; Selfridge, J. Eva; Lu, Jianghua; E, Lezi; Roy, Nairita; Hutfles, Lewis; Burns, Jeffrey M.; Michaelis, Elias K.; Yan, ShiDu; Cardoso, Sandra M.; Swerdlow, Russell H.

    2013-01-01

    Bioenergetic dysfunction occurs in Alzheimer's disease (AD) and mild cognitive impairment (MCI), a clinical syndrome that frequently precedes symptomatic AD. In this study, we modeled AD and MCI bioenergetic dysfunction by transferring mitochondria from MCI, AD and control subject platelets to mtDNA-depleted SH-SY5Y cells. Bioenergetic fluxes and bioenergetics-related infrastructures were characterized in the resulting cytoplasmic hybrid (cybrid) cell lines. Relative to control cybrids, AD and MCI cybrids showed changes in oxygen consumption, respiratory coupling and glucose utilization. AD and MCI cybrids had higher ADP/ATP and lower NAD+/NADH ratios. AD and MCI cybrids exhibited differences in proteins that monitor, respond to or regulate cell bioenergetic fluxes including HIF1α, PGC1α, SIRT1, AMPK, p38 MAPK and mTOR. Several endpoints suggested mitochondrial mass increased in the AD cybrid group and probably to a lesser extent in the MCI cybrid group, and that the mitochondrial fission–fusion balance shifted towards increased fission in the AD and MCI cybrids. As many of the changes we observed in AD and MCI cybrid models are also seen in AD subject brains, we conclude reduced bioenergetic function is present during very early AD, is not brain-limited and induces protean retrograde responses that likely have both adaptive and mal-adaptive consequences. PMID:23740939

  15. Empirical correlation of volumetric mass transfer coefficient for a rectangular internal-loop airlift bioreactor

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An empirical correlation of volumetric mass transfer coefficient was developed for a pilot scale internal-loop rectangular airlift bioreactor that was designed for biotechnology. The empirical correlation combines classic turbulence theory, Kolmogorov’s isotropic turbulence theory with Higbie’s pen...

  16. Mass coefficient and Grodzins relation for the ground-state band and {gamma} band

    SciTech Connect

    Jolos, R. V.; Brentano, P. von

    2006-12-15

    It is shown that the available experimental data on the energies of the first and the {gamma}-vibrational 2{sup +} states and the reduced E2 transition probabilities from these states to the ground state require for the explanation significantly different values of the mass coefficients for the rotational motion and {gamma}-vibrations.

  17. Swarm intelligence based wavelet coefficient feature selection for mass spectral classification: an application to proteomics data.

    PubMed

    Zhao, Weixiang; Davis, Cristina E

    2009-09-28

    This paper introduces the ant colony algorithm, a novel swarm intelligence based optimization method, to select appropriate wavelet coefficients from mass spectral data as a new feature selection method for ovarian cancer diagnostics. By determining the proper parameters for the ant colony algorithm (ACA) based searching algorithm, we perform the feature searching process for 100 times with the number of selected features fixed at 5. The results of this study show: (1) the classification accuracy based on the five selected wavelet coefficients can reach up to 100% for all the training, validating and independent testing sets; (2) the eight most popular selected wavelet coefficients of the 100 runs can provide 100% accuracy for the training set, 100% accuracy for the validating set, and 98.8% accuracy for the independent testing set, which suggests the robustness and accuracy of the proposed feature selection method; and (3) the mass spectral data corresponding to the eight popular wavelet coefficients can be located by reverse wavelet transformation and these located mass spectral data still maintain high classification accuracies (100% for the training set, 97.6% for the validating set, and 98.8% for the testing set) and also provide sufficient physical and medical meaning for future ovarian cancer mechanism studies. Furthermore, the corresponding mass spectral data (potential biomarkers) are in good agreement with other studies which have used the same sample set. Together these results suggest this feature extraction strategy will benefit the development of intelligent and real-time spectroscopy instrumentation based diagnosis and monitoring systems.

  18. The Small-Mass Limit for Langevin Dynamics with Unbounded Coefficients and Positive Friction

    NASA Astrophysics Data System (ADS)

    Herzog, David P.; Hottovy, Scott; Volpe, Giovanni

    2016-05-01

    A class of Langevin stochastic differential equations is shown to converge in the small-mass limit under very weak assumptions on the coefficients defining the equation. The convergence result is applied to three physically realizable examples where the coefficients defining the Langevin equation for these examples grow unboundedly either at a boundary, such as a wall, and/or at the point at infinity. This unboundedness violates the assumptions of previous limit theorems in the literature. The main result of this paper proves convergence for such examples.

  19. Mass attenuation coefficient of binderless, pre-treated and tannin-based Rhizophora spp. particleboards using 16.59 - 25.26 keV photon energy range

    NASA Astrophysics Data System (ADS)

    Mohd Yusof, Mohd Fahmi; Hamid, Puteri Nor Khatijah Abdul; Bauk, Sabar; Hashim, Rokiah; Tajuddin, Abdul Aziz

    2015-04-01

    The Rhizophora spp. particleboards were fabricated using ≤ 104 µm particle size at three different fabrication methods; binderless, steam pre-treated and tannin-added. The mass attenuation coefficient of Rhizophora spp. particleboards were measured using x-ray fluorescent (XRF) photon from niobium, molybdenum, palladium, silver and tin metal plates that provided photon energy between 16.59 to 25.26 keV. The results were compared to theoretical values for water calculated using photon cross-section database (XCOM).The results showed that all Rhizophora spp. particleboards having mass attenuation coefficient close to calculated XCOM for water. Tannin-added Rizophora spp. particleboard was nearest to calculated XCOM for water with χ2 value of 13.008 followed by binderless Rizophora spp. (25.859) and pre-treated Rizophora spp. (91.941).

  20. Estimation of REV Size for Fractured Rock Mass Based on Damage Coefficient

    NASA Astrophysics Data System (ADS)

    Ni, Pengpeng; Wang, Shuhong; Wang, Cungen; Zhang, Simiao

    2017-03-01

    Estimation of representative elementary volume (REV) is significant to analyze fractured rock mass in the framework of continuum mechanics. Engineers can therefore simplify the analysis by using an equivalent rock block with an average property, and the influence of fractures can be neglected in finite element modelling. The indicators to determine the REV size based on the joint geometrical parameters include the volumetric fracture intensity ( P 32) and the fracture tensor, but this type of calculation generally provides a lower bound evaluation. A novel conceptual framework of damage coefficient is introduced in this paper to consider the mechanical properties of fractures, such as joint aperture and roughness. A parametric study has been performed to establish the correlation between the proposed dimensionless damage coefficient and the traditional derived P 32 value. The effectiveness of the developed method is demonstrated by a case study, where a larger mechanical REV size is indeed calculated based on the damage coefficient.

  1. Mass specific optical absorption coefficients of mineral dust components measured by a multi wavelength photoacoustic spectrometer

    NASA Astrophysics Data System (ADS)

    Utry, N.; Ajtai, T.; Pintér, M.; Tombácz, E.; Illés, E.; Bozóki, Z.; Szabó, G.

    2014-09-01

    Mass specific optical absorption coefficients of various mineral dust components including silicate clays (illite, kaolin and bentonite), oxides (quartz, hematite and rutile), and carbonate (limestone) were determined at wavelengths of 1064, 532, 355 and 266 nm. These values were calculated from aerosol optical absorption coefficients measured by a multi-wavelength photoacoustic (PA) instrument, the mass concentration and the number size distribution of the generated aerosol samples as well as the size transfer functions of the measuring instruments. These results are expected to have considerable importance in global radiative forcing calculations. They can also serve as reference for validating calculated wavelength dependent imaginary parts (κ) of complex refractive indices which up to now have been typically deduced from bulk phase measurements by using indirect measurement methods. Accordingly, the presented comparison of the measured and calculated aerosol optical absorption spectra revealed the strong need for standardized sample preparation and measurement methodology in case of bulk phase measurements.

  2. Effect of impeller geometry on gas-liquid mass transfer coefficients in filamentous suspensions.

    PubMed

    Dronawat, S N; Svihla, C K; Hanley, T R

    1997-01-01

    Volumetric gas-liquid mass transfer coefficients were measured in suspensions of cellulose fibers with concentrations ranging from 0 to 20 g/L. The mass transfer coefficients were measured using the dynamic method. Results are presented for three different combinations of impellers at a variety of gassing rates and agitation speeds. Rheological properties of the cellulose fibers were also measured using the impeller viscometer method. Tests were conducted in a 20 L stirred-tank fermentor and in 65 L tank with a height to diameter ratio of 3:1. Power consumption was measured in both vessels. At low agitation rates, two Rushton turbines gave 20% better performance than the Rushton and hydrofoil combination and 40% better performance than the Rushton and propeller combination for oxygen transfer. At higher agitation rates, the Rushton and hydrofoil combination gave 14 and 25% better performance for oxygen transfer than two Rushton turbines and the Rushton and hydrofoil combination, respectively.

  3. The Use of Stereotypes in Mass Media Advertising: Blacks in Magazine, Newspaper and Television Ads.

    ERIC Educational Resources Information Center

    Culley, James D.; Bennett, Rex

    A brief review of the literature on the use of black stereotypes in mass media advertising, and the results of a current study in this area are presented. Data were gathered by analysis of 1,536 ads in six general interest magazines and 4,371 ads in the New York Times over a one month period, and 368 television commercials on three networks over a…

  4. In-situ determination of field-scale NAPL mass transfer coefficients: Performance, simulation and analysis

    NASA Astrophysics Data System (ADS)

    Mobile, Michael; Widdowson, Mark; Stewart, Lloyd; Nyman, Jennifer; Deeb, Rula; Kavanaugh, Michael; Mercer, James; Gallagher, Daniel

    2016-04-01

    Better estimates of non-aqueous phase liquid (NAPL) mass, its persistence into the future, and the potential impact of source reduction are critical needs for determining the optimal path to clean up sites impacted by NAPLs. One impediment to constraining time estimates of source depletion is the uncertainty in the rate of mass transfer between NAPLs and groundwater. In this study, an innovative field test is demonstrated for the purpose of quantifying field-scale NAPL mass transfer coefficients (klN) within a source zone of a fuel-contaminated site. Initial evaluation of the test concept using a numerical model revealed that the aqueous phase concentration response to the injection of clean groundwater within a source zone was a function of NAPL mass transfer. Under rate limited conditions, NAPL dissolution together with the injection flow rate and the radial distance to monitoring points directly controlled time of travel. Concentration responses observed in the field test were consistent with the hypothetical model results allowing field-scale NAPL mass transfer coefficients to be quantified. Site models for groundwater flow and solute transport were systematically calibrated and utilized for data analysis. Results show klN for benzene varied from 0.022 to 0.60 d- 1. Variability in results was attributed to a highly heterogeneous horizon consisting of layered media of varying physical properties.

  5. Global Mass Flux Solutions from GRACE: A Comparison of Parameter Estimation Strategies - Mass Concentrations Versus Stokes Coefficients

    NASA Technical Reports Server (NTRS)

    Rowlands, D. D.; Luthcke, S. B.; McCarthy J. J.; Klosko, S. M.; Chinn, D. S.; Lemoine, F. G.; Boy, J.-P.; Sabaka, T. J.

    2010-01-01

    The differences between mass concentration (mas con) parameters and standard Stokes coefficient parameters in the recovery of gravity infonnation from gravity recovery and climate experiment (GRACE) intersatellite K-band range rate data are investigated. First, mascons are decomposed into their Stokes coefficient representations to gauge the range of solutions available using each of the two types of parameters. Next, a direct comparison is made between two time series of unconstrained gravity solutions, one based on a set of global equal area mascon parameters (equivalent to 4deg x 4deg at the equator), and the other based on standard Stokes coefficients with each time series using the same fundamental processing of the GRACE tracking data. It is shown that in unconstrained solutions, the type of gravity parameter being estimated does not qualitatively affect the estimated gravity field. It is also shown that many of the differences in mass flux derivations from GRACE gravity solutions arise from the type of smoothing being used and that the type of smoothing that can be embedded in mas con solutions has distinct advantages over postsolution smoothing. Finally, a 1 year time series based on global 2deg equal area mascons estimated every 10 days is presented.

  6. A note on physical mass and the thermodynamics of AdS-Kerr black holes

    SciTech Connect

    McInnes, Brett; Ong, Yen Chin E-mail: yenchin.ong@nordita.org

    2015-11-01

    As with any black hole, asymptotically anti-de Sitter Kerr black holes are described by a small number of parameters, including a ''mass parameter'' M that reduces to the AdS-Schwarzschild mass in the limit of vanishing angular momentum. In sharp contrast to the asymptotically flat case, the horizon area of such a black hole increases with the angular momentum parameter a if one fixes M; this appears to mean that the Penrose process in this case would violate the Second Law of black hole thermodynamics. We show that the correct procedure is to fix not M but rather the ''physical'' mass E=M/(1−a{sup 2}/L{sup 2}){sup 2}; this is motivated by the First Law. For then the horizon area decreases with a. We recommend that E always be used as the mass in physical processes: for example, in attempts to ''over-spin'' AdS-Kerr black holes.

  7. Development of a model to determine mass transfer coefficient and oxygen solubility in bioreactors.

    PubMed

    Lee, Johnny

    2017-02-01

    The objective of this paper is to present an experimentally validated mechanistic model to predict the oxygen transfer rate coefficient (Kla) in aeration tanks for different water temperatures. Using experimental data created by Hunter and Vogelaar, the formula precisely reproduces experimental results for the standardized Kla at 20 °C, comparatively better than the current model used by ASCE 2-06 based on the equation Kla20 = Kla. ([Formula: see text])((20-T)) where T is in °C. Currently, reported values for [Formula: see text] range from 1.008 to 1.047. Because it is a geometric function, large error can result if an incorrect value of [Formula: see text] is used. Establishment of such value for an aeration system can only be made by means of series of full scale testing over a range of temperatures required. The new model predicts oxygen transfer coefficients to within 1% error compared to observed measurements. This is a breakthrough since the correct prediction of the volumetric mass transfer coefficient (Kla) is a crucial step in the design, operation and scale up of bioreactors including wastewater treatment plant aeration tanks, and the equation developed allows doing so without resorting to multiple full scale testing for each individual tank under the same testing condition for different temperatures. The effect of temperature on the transfer rate coefficient Kla is explored in this paper, and it is recommended to replace the current model by this new model given by: [Formula: see text] where T is in degree Kelvin, and the subscripts refer to degree Celsius; E, ρ, σ are properties of water. Furthermore, using data from published data on oxygen solubility in water, it was found that solubility bears a linear and inverse relationship with the mass transfer coefficient.

  8. Mass transfer coefficient in ginger oil extraction by microwave hydrotropic solution

    NASA Astrophysics Data System (ADS)

    Handayani, Dwi; Ikhsan, Diyono; Yulianto, Mohamad Endy; Dwisukma, Mandy Ayulia

    2015-12-01

    This research aims to obtain mass transfer coefficient data on the extraction of ginger oil using microwave hydrotropic solvent as an alternative to increase zingiberene. The innovation of this study is extraction with microwave heater and hydrotropic solvent,which able to shift the phase equilibrium, and the increasing rate of the extraction process and to improve the content of ginger oil zingiberene. The experiment was conducted at the Laboratory of Separation Techniques at Chemical Engineering Department of Diponegoro University. The research activities carried out in two stages, namely experimental and modeling work. Preparation of the model postulated, then lowered to obtain equations that were tested and validated using data obtained from experimental. Measurement of experimental data was performed using microwave power (300 W), extraction temperature of 90 ° C and the independent variable, i.e.: type of hydrotropic, the volume of solvent and concentration in order, to obtain zingiberen levels as a function of time. Measured data was used as a tool to validate the postulation, in order to obtain validation of models and empirical equations. The results showed that the mass transfer coefficient (Kla) on zingiberene mass transfer models ginger oil extraction at various hydrotropic solution attained more 14 ± 2 Kla value than its reported on the extraction with electric heating. The larger value of Kla, the faster rate of mass transfer on the extraction process. To obtain the same yields, the microwave-assisted extraction required one twelfth time shorter.

  9. Evaporation in relation to CO 2 concentration: Analysis of mass transfer coefficient

    NASA Astrophysics Data System (ADS)

    Ojha, C. S. P.; Yasuda, Hiroshi; Rao, Surampalli; Abd Elbasit, Mohamed A. M.; Kumar, Manoj

    2011-11-01

    In this study, the potential of mass transfer approach in estimating evaporation changes under different CO 2 levels are evaluated using data from controlled chamber experiments in which radiation and wind velocity were kept constant and temperature and relative humidity profiles were varied in different patterns along with CO 2 concentration. Currently, FAO procedure lists three approaches to compute air vapour pressure based on temperature and relative humidity profiles. In this study, the impact of using different procedures of estimating air vapour pressure is examined to assess the use of mass transfer approach for estimating evaporation. To achieve this, a part of the data is used to calibrate mass transfer coefficient which is subsequently used to project evaporation for future states. Accordingly, strategies are ranked for their potential in estimating evaporation. The effect of evaporation rate is compared at 400 ppm and 600 ppm CO 2 level. It has been observed that the evaporation rate is more pronounced at higher CO 2 level.

  10. Variations of low-degree gravity coefficients induced by oceanic mass redistribution

    NASA Astrophysics Data System (ADS)

    Kao, Y.

    2013-05-01

    Sea level anomalies (SLA) are determined from TOPEX/POSEIDON satellite altimeter data. The Steric effect will be removed from SLA to compute low-degree gravity harmonic coefficients from 1992 to 2011, forming time series of low-frequency oceanic mass-induced gravity change. Wavelet coefficients is used to resolve the harmonic spectrum for the relationship between time and study the amplitude, frequency and time correlation. The preliminary results show that the sea level trend (SLT) of corrected sea level anomalies (CSLA) at multiple sea areas are contrary to the results of SLA and Steric. The SLA and Steric results shows that the years of the phase change in the equator as the boundary, the area is divided into north and south hemisphere opposite phase change, and the two results of the data trend is also consistent. The coefficient annual change rate is 1.16±0.07×10-10, amplitude is 5.13×10-10 and phase for -81.2 degrees. The wavelet spectrum analysis shows that the the CSLA J2 change cycle for 3-7 years. The change of is greater than coefficient and its mean pole motion in the y-direction movement is greater than the x-direction.

  11. Near-Unity Mass Accommodation Coefficient of Organic Molecules of Varying Structure

    PubMed Central

    2014-01-01

    Atmospheric aerosol particles have a significant effect on global climate, air quality, and consequently human health. Condensation of organic vapors is a key process in the growth of nanometer-sized particles to climate relevant sizes. This growth is very sensitive to the mass accommodation coefficient α, a quantity describing the vapor uptake ability of the particles, but knowledge on α of atmospheric organics is lacking. In this work, we have determined α for four organic molecules with diverse structural properties: adipic acid, succinic acid, naphthalene, and nonane. The coefficients are studied using molecular dynamics simulations, complemented with expansion chamber measurements. Our results are consistent with α = 1 (indicating nearly perfect accommodation), regardless of the molecular structural properties, the phase state of the bulk condensed phase, or surface curvature. The results highlight the need for experimental techniques capable of resolving the internal structure of nanoparticles to better constrain the accommodation of atmospheric organics. PMID:25260072

  12. Free vibrations of circular cylindrical shells with a small added concentrated mass

    NASA Astrophysics Data System (ADS)

    Leizerovich, G. S.; Seregin, S. V.

    2016-09-01

    The effect of a small added mass on the frequency and shape of free vibrations of a thin shell is studied using shallow shell theory. The proposed mathematical model assumes that mass asymmetry even in a linear formulation leads to coupled radial flexural vibrations. The interaction of shape-generating waves is studied using modal equations obtained by the Bubnov-Galerkin method. Splitting of the flexural frequency spectrum is found, which is caused not only by the added mass but also by the wave-formation parameters of the shell. The ranges of the relative lengths and shell thicknesses are determined in which the interaction of flexural and radial vibrations can be neglected.

  13. Effects of micro-sized and nano-sized WO3 on mass attenauation coefficients of concrete by using MCNPX code.

    PubMed

    Tekin, H O; Singh, V P; Manici, T

    2017-03-01

    In the present work the effect of tungsten oxide (WO3) nanoparticles on mass attenauation coefficients of concrete has been investigated by using MCNPX (version 2.4.0). The validation of generated MCNPX simulation geometry has been provided by comparing the results with standard XCOM data for mass attenuation coefficients of concrete. A very good agreement between XCOM and MCNPX have been obtained. The validated geometry has been used for definition of nano-WO3 and micro-WO3 into concrete sample. The mass attenuation coefficients of pure concrete and WO3 added concrete with micro-sized and nano-sized have been compared. It was observed that shielding properties of concrete doped with WO3 increased. The results of mass attenauation coefficients also showed that the concrete doped with nano-WO3 significanlty improve shielding properties than micro-WO3. It can be concluded that addition of nano-sized particles can be considered as another mechanism to reduce radiation dose.

  14. Study of micro piezoelectric vibration generator with added mass and capacitance suitable for broadband vibration

    SciTech Connect

    He, Qing Mao, Xinhua Chu, Dongliang

    2015-07-15

    This study proposes an optimized frequency adjustment method that uses a micro-cantilever beam-based piezoelectric vibration generator based on a combination of added mass and capacitance. The most important concept of the proposed method is that the frequency adjustment process is divided into two steps: the first is a rough adjustment step that changes the size of the mass added at the end of cantilever to adjust the frequency in a large-scale and discontinuous manner; the second step is a continuous but short-range frequency adjustment via the adjustable added capacitance. Experimental results show that when the initial natural frequency of a micro piezoelectric vibration generator is 69.8 Hz, then this natural frequency can be adjusted to any value in the range from 54.2 Hz to 42.1 Hz using the combination of the added mass and the capacitance. This method simply and effectively matches a piezoelectric vibration generator’s natural frequency to the vibration source frequency.

  15. A simulation of gas flow: The dependence of the tangential momentum accommodation coefficient on molecular mass

    NASA Astrophysics Data System (ADS)

    Lim, William W.; Suaning, Gregg J.; McKenzie, David R.

    2016-09-01

    The tangential momentum accommodation coefficient (TMAC) influences the rate of pressure driven flow of a gas in a channel. The manner in which TMAC depends on the molecular mass is of importance as it influences the extent to which gas flow rates are affected by their mass, but there are conflicting opinions in the literature concerning the extent and even the sign of this dependence. We simulate the flow of the noble gases He, Ne, Ar, Kr, and Xe using molecular dynamics with Lennard-Jones potentials. The interaction with the wall is made realistic by simulating five layers of mobile atoms and allowing for adsorbed gas on the wall. With increasing mass of the gas, the TMAC exhibits asymptotic behaviour in approaching the value assumed to apply for an entrapped atom. Either increasing or decreasing TMAC with respect to an increasing molecular mass is produced, depending on the assumed TMAC of an entrapped atom. This resolves a conflict in the literature, where both increasing and decreasing trends are observed with mass.

  16. Isotopic mass-dependence of metal cation diffusion coefficients in liquid water

    SciTech Connect

    Bourg, I.C.; Richter, F.M.; Christensen, J.N.; Sposito, G.

    2009-01-11

    Isotope distributions in natural systems can be highly sensitive to the mass (m) dependence of solute diffusion coefficients (D) in liquid water. Isotope geochemistry studies routinely have assumed that this mass dependence either is negligible (as predicted by hydrodynamic theories) or follows a kinetic-theory-like inverse square root relationship (D {proportional_to} m{sup -0.5}). However, our recent experimental results and molecular dynamics (MD) simulations showed that the mass dependence of D is intermediate between hydrodynamic and kinetic theory predictions (D {proportional_to} m{sup -{beta}} with 0 {<=} {beta} < 0.2 for Li{sup +}, Cl{sup -}, Mg{sup 2+}, and the noble gases). In this paper, we present new MD simulations and experimental results for Na{sup +}, K{sup +}, Cs{sup +}, and Ca{sup 2+} that confirm the generality of the inverse power-law relation D {proportional_to} m{sup -{beta}}. Our new findings allow us to develop a general description of the influence of solute valence and radius on the mass dependence of D for monatomic solutes in liquid water. This mass dependence decreases with solute radius and with the magnitude of solute valence. Molecular-scale analysis of our MD simulation results reveals that these trends derive from the exponent {beta} being smallest for those solutes whose motions are most strongly coupled to solvent hydrodynamic modes.

  17. Soil cleanup by in-situ surfactant flushing. VII. Determination of mass transfer coefficients for reclamation of surfactant for recycle

    SciTech Connect

    Underwood, J.L.; Debelak, K.A.; Wilson, D.J.

    1995-01-01

    The contamination of soils and groundwater with volatile and/or nonvolatile organics from underground storage tanks, spills, and improper waste disposal presents a major remediation problem in the United States and other industrial nations. Mass transfer coefficients were determined for the extraction of naphthalene in 50 and 100 mM aqueous sodium dodecylsulfate (SDS) solutions (the continuous phase) into hexane (dispersed phase). The effect of surfactant was explored in a series of single drop experiments. Mass transfer coefficients determined experimentally fall between the values predicted by correlations for circulating and noncirculating drops. The presence of SDS does appear to reduce the mass transfer coefficients as compared to those for pure water.

  18. Effect of impeller geometry on gas-liquid mass transfer coefficients in filamentous suspensions

    SciTech Connect

    Dronawat, S.N.; Svihla, C.K.; Hanley, T.R.

    1997-12-31

    Volumetric gas-liquid mass transfer coefficients were measured in suspensions of cellulose fibers with concentrations ranging from 0 to 20 g/L. The mass transfer coefficients were measured using the dynamic method. Results are presented for three different combinations of impellers at a variety of gassing rates and agitation speeds. Rheological properties of the cellulose fibers were also measured using the impeller viscometer method. Tests were conducted in a 20 L stirred-tank fermentor and in 65 L tank with a height to diameter ratio of 3:1. Power consumption was measured in both vessels. At low agitation rates, two Rushton turbines gave 20% better performance than the Rushton and hydrofoil combination and 40% better performance than the Rushton and propeller combination for oxygen transfer. At higher agitation rates, the Rushton and hydrofoil combination gave 14 and 25% better performance for oxygen transfer than two Rushton turbines and the Rushton and hydrofoil combination, respectively. 8 refs., 11 figs., 1 tab.

  19. Experimental and numerical study on effects of airflow and aqueous ammonium solution temperature on ammonia mass transfer coefficient.

    PubMed

    Rong, Li; Nielsen, Peter V; Zhang, Guoqiang

    2010-04-01

    This paper reports the results of an investigation, based on fundamental fluid dynamics and mass transfer theory, carried out to obtain a general understanding of ammonia mass transfer from an emission surface. The effects of airflow and aqueous ammonium solution temperature on ammonia mass transfer are investigated by using computational fluid dynamics (CFD) modeling and by a mechanism modeling using dissociation constant and Henry's constant models based on the parameters measured in the experiments performed in a wind tunnel. The validated CFD model by experimental data is used to investigate the surface concentration distribution and mass transfer coefficient at different temperatures and velocities for which the Reynolds number is from 1.36 x 10(4) to 5.43 x 10(4) (based on wind tunnel length). The surface concentration increases as velocity decreases and varies greatly along the airflow direction on the emission surface. The average mass transfer coefficient increases with higher velocity and turbulence intensity. However, the mass transfer coefficient estimated by CFD simulation is consistently larger than the calculated one by the method using dissociation constant and Henry's constant models. In addition, the results show that the liquid-air temperature difference has little impact on the simulated mass transfer coefficient by CFD modeling, whereas the mass transfer coefficient increases with higher liquid temperature using the other method under the conditions that the liquid temperature is lower than the air temperature. Although there are differences of mass transfer coefficients between these two methods, the mass transfer coefficients determined by these two methods are significantly related.

  20. Mass transfer of SCWO processes: Molecular diffusion and mass transfer coefficients of inorganic nitrate species in sub- and supercritical water

    SciTech Connect

    Goemans, M.G.E.; Gloyna, E.F.; Buelow, S.J.

    1996-04-01

    Molecular diffusion coefficients of lithium-, sodium-, potassium-, cesium-, calcium-, and strontium nitrate in subcritical water were determined by analysis of Taylor dispersion profiles. Pressures ranged from 300 to 500 bar at temperatures ranging from 25{degrees}C to 300{degrees}C. The reported diffusion values were determined at infinite dilution. Molecular diffusion coefficients were 10 to 20 times faster in near-critical subcritical water than in water at ambient temperature and pressure (ATP). These findings implied that the diffusion rates were more liquid like than they were gas like, hence experimental results were correlated with diffusion models for liquids. The subcritical diffusion data presented in this work, and supercritical diffusion results published elsewhere were correlated with hydrodynamic diffusion equations. Both the Wilke-Chang correlation and the Stokes-Einstein equation yielded predictions within 10% of the experimental results if the structure of the diffusing species could be estimated. The effect of the increased diffusion rates on mass transfer rates in supercritical water oxidation applications was quantified, with emphasis on heterogeneous oxidation processes. This study and results published elsewhere showed that diffusion limited conditions are much more likely to be encountered in SCWO processes than commonly acknowledged.

  1. Condensation of water vapor: Experimental determination of mass and thermal accommodation coefficients

    NASA Astrophysics Data System (ADS)

    Winkler, P. M.; Vrtala, A.; Rudolf, R.; Wagner, P. E.; Riipinen, I.; Vesala, T.; Lehtinen, K. E. J.; Viisanen, Y.; Kulmala, M.

    2006-10-01

    Experimental determinations of mass and thermal accommodation coefficients αm and αt for condensation of water vapor in air have been conducted covering a temperature range from about 250 to 290 K. For the first time, both coefficients have been determined directly and simultaneously. To this end, growth of water droplets in air has been observed at different total gas pressures ranging from about 1000 down to 100 hPa. Monodispersed seed particles have been used as condensation nuclei. After addition of water vapor with well-defined partial vapor pressure, supersaturation was achieved by adiabatic expansion in an expansion chamber. Most experiments reported in the present paper were performed at vapor saturation ratios ranging from 1.30 to 1.50. Monodispersed Ag particles with a diameter of 9 nm have been used as condensation nuclei, and for humidification a diffusion humidifier was applied. One experiment was performed at the saturation ratio of 1.02, which resembles conditions observed in the Earth's lower atmosphere. In this experiment, monodispersed DEHS particles with a diameter of 80 nm were used as condensation nuclei, and water vapor was generated by quantitative evaporation of a liquid jet. Droplet growth was monitored using the CAMS method. For determination of the accommodation coefficients, experimental droplet growth curves were compared to corresponding theoretical curves. Quantitative comparison was performed by varying the respective accommodation coefficient and the starting time of droplet growth in a two-parameter best fit procedure. Considering the uncertainty with respect to the starting time of droplet growth and the uncertainties of the experimental water vapor supersaturation, corresponding maximum errors have been determined. From the results obtained it can be stated that αt is larger than 0.85 over the whole considered temperature range. For 250-270 K, values of αm below 0.8 are excluded, and for higher temperatures up to 290 K we can

  2. Effects of reservoir heterogeneity on scaling of effective mass transfer coefficient for solute transport.

    PubMed

    Leung, Juliana Y; Srinivasan, Sanjay

    2016-09-01

    Modeling transport process at large scale requires proper scale-up of subsurface heterogeneity and an understanding of its interaction with the underlying transport mechanisms. A technique based on volume averaging is applied to quantitatively assess the scaling characteristics of effective mass transfer coefficient in heterogeneous reservoir models. The effective mass transfer coefficient represents the combined contribution from diffusion and dispersion to the transport of non-reactive solute particles within a fluid phase. Although treatment of transport problems with the volume averaging technique has been published in the past, application to geological systems exhibiting realistic spatial variability remains a challenge. Previously, the authors developed a new procedure where results from a fine-scale numerical flow simulation reflecting the full physics of the transport process albeit over a sub-volume of the reservoir are integrated with the volume averaging technique to provide effective description of transport properties. The procedure is extended such that spatial averaging is performed at the local-heterogeneity scale. In this paper, the transport of a passive (non-reactive) solute is simulated on multiple reservoir models exhibiting different patterns of heterogeneities, and the scaling behavior of effective mass transfer coefficient (Keff) is examined and compared. One such set of models exhibit power-law (fractal) characteristics, and the variability of dispersion and Keff with scale is in good agreement with analytical expressions described in the literature. This work offers an insight into the impacts of heterogeneity on the scaling of effective transport parameters. A key finding is that spatial heterogeneity models with similar univariate and bivariate statistics may exhibit different scaling characteristics because of the influence of higher order statistics. More mixing is observed in the channelized models with higher-order continuity. It

  3. Effects of reservoir heterogeneity on scaling of effective mass transfer coefficient for solute transport

    NASA Astrophysics Data System (ADS)

    Leung, Juliana Y.; Srinivasan, Sanjay

    2016-09-01

    Modeling transport process at large scale requires proper scale-up of subsurface heterogeneity and an understanding of its interaction with the underlying transport mechanisms. A technique based on volume averaging is applied to quantitatively assess the scaling characteristics of effective mass transfer coefficient in heterogeneous reservoir models. The effective mass transfer coefficient represents the combined contribution from diffusion and dispersion to the transport of non-reactive solute particles within a fluid phase. Although treatment of transport problems with the volume averaging technique has been published in the past, application to geological systems exhibiting realistic spatial variability remains a challenge. Previously, the authors developed a new procedure where results from a fine-scale numerical flow simulation reflecting the full physics of the transport process albeit over a sub-volume of the reservoir are integrated with the volume averaging technique to provide effective description of transport properties. The procedure is extended such that spatial averaging is performed at the local-heterogeneity scale. In this paper, the transport of a passive (non-reactive) solute is simulated on multiple reservoir models exhibiting different patterns of heterogeneities, and the scaling behavior of effective mass transfer coefficient (Keff) is examined and compared. One such set of models exhibit power-law (fractal) characteristics, and the variability of dispersion and Keff with scale is in good agreement with analytical expressions described in the literature. This work offers an insight into the impacts of heterogeneity on the scaling of effective transport parameters. A key finding is that spatial heterogeneity models with similar univariate and bivariate statistics may exhibit different scaling characteristics because of the influence of higher order statistics. More mixing is observed in the channelized models with higher-order continuity. It

  4. Further explorations of Skyrme-Hartree-Fock-Bogoliubov mass formulas. XIII. The 2012 atomic mass evaluation and the symmetry coefficient

    NASA Astrophysics Data System (ADS)

    Goriely, S.; Chamel, N.; Pearson, J. M.

    2013-08-01

    Our family of three Hartree-Fock-Bogoliubov (HFB) mass models, labeled BSk19, BSk20, and BSk21, is here extended by (a) refitting to the 2012 Atomic Mass Evaluation (AME), and (b) varying the symmetry coefficient J. Five new models, labeled BSk22 to BSk26, along with their mass tables, HFB-22 to HFB-26, respectively, are presented. These models are characterized by unconventional Skyrme forces containing t4 and t5 terms, i.e., density-dependent generalizations of the usual t1 and t2 terms, respectively. Highly realistic contact pairing forces are used. The Skyrme forces are constrained to fit realistic equations of state of neutron matter stiff enough to support the massive neutron stars PSR J1614-2230 and PSR J0348+0432. Unphysical spin and spin-isospin instabilities of homogeneous nuclear matter, including the transition to a polarized state in neutron-star matter, are eliminated with the new forces. The best fits to the new database of 2353 nuclei are found for models BSk24 (J=30 MeV) and BSk25 (J=29 MeV), for which the root-mean square (rms) deviations are 0.55 and 0.54 MeV, respectively. Despite the larger database this is even better than the rms deviation of 0.58 MeV that we found with our fits to the 2003 AME. With J=32 MeV the rms deviation rises to 0.63 MeV. The neutron-skin thicknesses derived from antiproton scattering are shown to be consistent with the conclusions that we have drawn from masses.

  5. Effective atomic numbers and mass attenuation coefficients of some thermoluminescent dosimetric compounds for total photon interaction

    SciTech Connect

    Shivaramu; Amutha, R.; Ramprasath, V.

    1999-05-01

    Effective atomic numbers for total gamma-ray interaction with some selected thermoluminescent dosimetric compounds such as barium acetate, barium sulfate, calcium carbonate, calcium sulfate, calcium sulfate dihydrate, cadmium sulfate (anhydrous), cadmium sulfate, strontium sulfate, and lithium fluoride have been calculated in the 1-keV to 20-MeV energy region. Experimental mass attenuation coefficients and effective atomic numbers for these compounds at selected photon energies of 26.3, 33.2, 59.54, and 661.6 keV have been obtained from good geometry transmission measurements and compared with theoretical values. The effect of absorption edge on effective atomic numbers and its variation with energy, and nonvalidity of the Bragg`s mixture rule at incident photon energies closer to the absorption edges of constituent elements of compounds are discussed.

  6. Mass dependence of the Soret coefficient for atomic diffusion in condensed matter.

    PubMed

    Yu, Wei-Feng; Lin, Zheng-Zhe; Ning, Xi-Jing

    2013-06-01

    Particle diffusion in condensed matters driven by thermal gradient, the so-called Ludwig-Soret effect, has been investigated for about 160 years, but up to the present, seldom do theories on atomic level understand a series of puzzles in relevant experiments. In this work, we derived an expression of Soret coefficient for atomic diffusion in condensed matter from a single atom statistic model with relevant parameters expressed in terms of atomic mass and the potential profile felt by the guest atom without empirical parameters. The reality of the model was strictly tested by molecular dynamics simulations, especially the result for He atom diffusing on graphene sheet, which suggests the Soret effect may be used to separate (3)He from (4)He.

  7. Measurements of mass attenuation coefficient, effective atomic number and electron density of some amino acids

    NASA Astrophysics Data System (ADS)

    Kore, Prashant S.; Pawar, Pravina P.

    2014-05-01

    The mass attenuation coefficients of some amino acids, such as DL-aspartic acid-LR(C4H7NO4), L-glutamine (C4H10N2O3), creatine monohydrate LR(C4H9N3O2H2O), creatinine hydrochloride (C4H7N3O·HCl) L-asparagine monohydrate(C4H9N3O2H2O), L-methionine LR(C5H11NO2S), were measured at 122, 356, 511, 662, 1170, 1275 and 1330 keV photon energies using a well-collimated narrow beam good geometry set-up. The gamma-rays were detected using NaI (Tl) scintillation detection system with a resolution of 0.101785 at 662 keV. The attenuation coefficient data were then used to obtain the effective atomic numbers (Zeff), and effective electron densities (Neff) of amino acids. It was observed that the effective atomic number (Zeff) and effective electron densities (Neff) initially decrease and tend to be almost constant as a function of gamma-ray energy. Zeff and Neff experimental values showed good agreement with the theoretical values with less than 1% error for amino acids.

  8. Nonequilibrium Molecular Dynamics Simulations of Steady-State Heat and Mass Transport in Condensation. II. Transfer Coefficients.

    PubMed

    Røsjorde, A.; Kjelstrup, S.; Bedeaux, D.; Hafskjold, B.

    2001-08-01

    We present coefficients for transfer of heat and mass across the liquid-vapor interface of a one-component fluid. The coefficients are defined for the Gibbs surface from nonequilibrium thermodynamics and determined by nonequilibrium molecular dynamics simulations. The main conductivity coefficients are found to become large near the critical point, consistent with the disappearance of the surface in this limit. The resistivities of transfer found by molecular dynamics simulations are compared to the values predicted by kinetic theory. The main resistivity to heat transfer is found to agree from the triple point to about halfway to the critical point. The resistivity to mass transfer was used to determine the condensation coefficient, which was found to be practically constant with a value of about 0.82. The resistivity coupling coefficient predicted by simulations also agrees with values predicted by kinetic theory from the triple point until about halfway to the critical point. Copyright 2001 Academic Press.

  9. Single droplet separations and surface partition coefficient measurements using laser ablation mass spectrometry

    PubMed Central

    Jorabchi, Kaveh; Smith, Lloyd M.

    2010-01-01

    Surface activity of analytes plays a significant role in many chemical and physical phenomena. We present here a mass spectrometric method to characterize surface activity and solute partitioning between bulk liquid and the gas-liquid interface in droplets. The approach employs ablation by an IR laser from the surface of a microliter droplet deposited on a stainless steel post. The ablated material is ionized for mass spectrometric analysis by either droplet charging or by post-ionization in an electrospray plume. Three areas of application have been explored using this method; 1) separations in a single droplet: continuous ablation by a series of many successive laser pulses results in faster depletion of more surface active analytes, effectively comprising a surface activity-based separation. 2) Partition coefficient measurements: droplet volume is held constant during ablation by continually replenishing lost solvent. This leads to analyte-specific ion signal decay curves that may be fitted to a model based on Langmuir adsorption isotherms and simple analytical expressions, yielding quantitative values for the analyte surface partition coefficients. 3) Studies of the relationship between surface partitioning and HPLC phase partitioning: comparisons of surface activities measured by laser desorption with retention times in reversed phase HPLC reveal that the relationship between the two partitioning processes is very sensitive to chemical structure. Poor correlation between the retention time and surface activity is also observed within a subcategory of analytes (peptides). This effect is attributed to multi-modal solute-stationary phase interactions. The laser desorption approach presented here provides direct information on analyte surface activities free from the complications encountered in chromatographic methods due to chemical structure variations. PMID:19886638

  10. The calculation of mass attenuation coefficients of well-known thermoluminescent dosimetric compounds at wide energy range

    NASA Astrophysics Data System (ADS)

    Ermis, Elif Ebru

    2017-02-01

    The photon mass attenuation coefficients of LiF, BaSO4, CaCO3 and CaSO4 thermoluminescent dosimetric compounds at 100; 300; 500; 600; 800; 1,000; 1,500; 2,000; 3,000 and 5,000 keV gamma-ray energies were calculated. For this purpose, FLUKA Monte Carlo (MC) program which is one of the well-known MC codes was used in this study. Furthermore, obtained results were analyzed by means of ROOT program. National Institute of Standards and Technology (NIST) values were also used to compare the obtained theoretical values because the mass attenuation values of the used compounds could not found in the literature. Calculated mass attenuation coefficients were highly in accordance with the NIST values. As a consequence, FLUKA was successful in calculating the mass attenuation coefficients of the most used thermoluminescent compound.

  11. Determination of mass attenuation coefficients for threshold contrast evaluation in digital mammography

    NASA Astrophysics Data System (ADS)

    Hummel, Johann; Semturs, Friedrich; Menhart, Susanne; Figl, Michael

    2010-04-01

    According to the 'European protocol for the quality control of the physical and technical aspects of mammography screening' (EPQC) image quality digital mammography units has to be evaluated at different breast thicknesses. At the standard thickness of 50 mm polymethyl methacrylate (PMMA) image quality is determined by the analysis of CDMAM contrast detail phantom images where threshold contrasts are calculated for different gold disc diameters. To extend these results to other breast thicknesses contrast-to-noise ratios (CNR) and threshold contrast (TC) visibilities have to be calculated for all required thicknesses. To calculate the latter the mass attenuation coefficient (MAC) of gold has to be known for all possible beam qualities in the tube voltage range between 26 and 32 kV. In this paper we first determined the threshold contrast visibility using the CDMAM phantom with the same beam quality at different current-time products (mAs). We can derive from Rose theory that CNR • CT • α = const, where α is the diameter of the gold cylinder. From this the corresponding attenuation coefficients can be calculated. This procedure was repeated for four different beam qualities (Mo/Mo 27kV, Rh/Rh 29kV, Rh/Rh 31 kV, and W/Rh 29 kV)). Next, we measured the aluminium half value layer (HVL) of all x-ray spectra relevant for mammography. Using a first order Taylor expansion of MAC as a function of HVL, all other desired MAC can be calculated. The MAC as a function of the HVL was derived to MAChvl = -286.97 * hvl+186.03 with R2 = 0.997, where MAChvl indicates the MAC for all specific x-ray spectrum defined by its aluminium half value layer. Based on this function all necessary MACs needed for quality assurance (QA) were calculated. The results were in good agreement with the data found in the protocol.

  12. Nondestructive characterization of tie-rods by means of dynamic testing, added masses and genetic algorithms

    NASA Astrophysics Data System (ADS)

    Gentilini, C.; Marzani, A.; Mazzotti, M.

    2013-01-01

    The structural characterization of tie-rods is crucial for the safety assessments of historical buildings. The main parameters that characterize the behavior of tie-rods are the tensile force, the modulus of elasticity of the material and the rotational stiffness at both restraints. Several static, static-dynamic and pure dynamic nondestructive methods have been proposed in the last decades to identify such parameters. However, none of them is able to characterize all the four mentioned parameters. To fill this gap, in this work a procedure based on dynamic testing, added masses and genetic algorithms (GA) is proposed. The identification is driven by GA where the objective function is a metric of the discrepancy between the experimentally determined (by dynamic impact testing) and the numerically computed (by a fast and reliable finite element formulation) frequencies of vibration of some modified systems obtained from the tie-rod by adding a concentrated mass in specific positions. It is shown by a comprehensive numerical testing campaign in which several cases spanning from short, low-stressed, and almost hinged tie-rods to long, high-tensioned, and nearly clamped tie-rods, that the proposed strategy is reliable in the identification of the four unknowns. Finally, the procedure has been applied to characterize a metallic tie-rod located in Palazzo Paleotti, Bologna (Italy).

  13. Resistive thrust production can be as crucial as added mass mechanisms for inertial undulatory swimmers

    NASA Astrophysics Data System (ADS)

    Piñeirua, M.; Godoy-Diana, R.; Thiria, B.

    2015-08-01

    In this Rapid Communication, we address a crucial point regarding the description of moderate to high Reynolds numbers aquatic swimmers. For decades, swimming animals have been classified in two different families of propulsive mechanisms based on the Reynolds number: the resistive swimmers, using local friction to produce the necessary thrust force for locomotion at low Reynolds number, and the reactive swimmers, lying in the high Reynolds range, and using added mass acceleration (described by perfect fluid theory). However, inertial swimmers are also systems that dissipate energy, due to their finite size, therefore involving strong resistive contributions, even for high Reynolds numbers. Using a complete model for the hydrodynamic forces, involving both reactive and resistive contributions, we revisit here the physical mechanisms responsible for the thrust production of such swimmers. We show, for instance, that the resistive part of the force balance is as crucial as added mass effects in the modeling of the thrust force, especially for elongated species. The conclusions brought by this work may have significant contributions to the understanding of complex swimming mechanisms, especially for the future design of artificial swimmers.

  14. Resistive thrust production can be as crucial as added mass mechanisms for inertial undulatory swimmers.

    PubMed

    Piñeirua, M; Godoy-Diana, R; Thiria, B

    2015-08-01

    In this Rapid Communication, we address a crucial point regarding the description of moderate to high Reynolds numbers aquatic swimmers. For decades, swimming animals have been classified in two different families of propulsive mechanisms based on the Reynolds number: the resistive swimmers, using local friction to produce the necessary thrust force for locomotion at low Reynolds number, and the reactive swimmers, lying in the high Reynolds range, and using added mass acceleration (described by perfect fluid theory). However, inertial swimmers are also systems that dissipate energy, due to their finite size, therefore involving strong resistive contributions, even for high Reynolds numbers. Using a complete model for the hydrodynamic forces, involving both reactive and resistive contributions, we revisit here the physical mechanisms responsible for the thrust production of such swimmers. We show, for instance, that the resistive part of the force balance is as crucial as added mass effects in the modeling of the thrust force, especially for elongated species. The conclusions brought by this work may have significant contributions to the understanding of complex swimming mechanisms, especially for the future design of artificial swimmers.

  15. The effect of rotary inertia of added masses on vibrations of empty and fluid-filled circular cylindrical shells

    NASA Astrophysics Data System (ADS)

    Amabili, M.; Garziera, R.; Carra, S.

    2005-12-01

    This paper completes a study of Amabili and Garziera [2000, Vibrations of circular cylindrical shells with nonuniform constraints, elastic bed and added mass; Part I: empty and fluid-filled shells. J. Fluids Struct. 14, 669 690; 2002a, Vibrations of circular cylindrical shells with nonuniform constraints, elastic bed and added mass; Part II: shells containing or immersed in axial flow. J. Fluids Struct. 16, 31 51; 2002b, Vibrations of circular cylindrical shells with nonuniform constraints, elastic bed and added mass; Part III: steady viscous effects on shells conveying fluid. J. Fluids Struct. 16, 795 809] by adding the effect of rotary inertia of added masses to the DIVA code, based on the Rayleigh Ritz method and developed to study free vibrations of circular cylindrical shells with nonuniform boundary conditions, added masses, partial elastic bed, initial pre-stress, conveying flow or immersed in axial flow. The effect of rotary inertia has also been evaluated by commercial FEM software and experiments in order to validate the DIVA code. Calculations and experiments show that the effect of rotary inertia of added masses is generally negligible, except for additional local modes; this is in contrast with what has been found for thin plates, due to the geometric stiffness of the circular cylindrical shell.

  16. Peritoneal vascular reserve characterization through nitroprusside-induced modification of peritoneal mass transfer coefficients.

    PubMed

    Selgas, R; Carmona, A R; Martinez, M E; Perez-Fontan, M; Salinas, M; Conesa, J; Martinez Ara, J; Sicilia, L S

    1985-07-01

    The transport of solutes across the peritoneum may be increased by the topical administration of nitroprusside; the effects of the drug seem to be due to an increase in the number of perfused capillaries and/or in their permeability. We have compared the peritoneal mass transfer coefficients (MTC) for urea, creatinine and parathormone (PTH) under basal conditions and after administration of nitroprusside (4.5 mg/l dialysate) in 15 patients under CAPD therapy. The mean increments of the MTC were 48.8% for urea, 77.5% for creatinine and 323% for PTH. The relative MTC increments for the three molecules (taken in pairs) were: MTCPTH/urea' 2.53 times (mean), MTCPTH/creatinine' 1.7 times, and MTCcreatinine/urea' 0.73-times, with very variable ranges. The overall mean increment (OMI) for all three ratios ranged from -1.25 and +6 times. In six patients, some of the relative increments (and in three of them the OMI) were negative but the epidemiological features of these patients revealed no clear data. The OMI shows a direct correlation with the body surface area and an inverse correlation with the the duration of CAPD and ESRD and with the number of peritonitis episodes, albeit without statistical significance. We conclude that the peritoneal vascular reserve has individual characteristics, and that perhaps the OMI or some other similar index might serve to quantify and characterise it, if our findings are confirmed.

  17. Full Adaptive Optics Images of ADS 9731 and MU Cassiopeiae: Orbits and Masses

    NASA Astrophysics Data System (ADS)

    Drummond, Jack D.; Christou, Julian C.; Fugate, Robert Q.

    1995-09-01

    The double double ADS 9731 and the nearby Population II astrometric binary μ Cas have been imaged with full adaptive optics employed at the 1.5 m telescope belonging to the USAF Phillips Laboratory's Starfire Optical Range near Albuquerque, New Mexico. On 1994 May 4 at a wavelength of 0.85 μm, the Δmag values and separations for ADS 9731 components AB were observed to be 2.19 and 1".27, 0.90 and 1".55 for CD, and 0.40 and 14".8 between A and C. Combining these observations with earlier ones, we have obtained circular, highly inclined, long-period (834 and 1230 yr) preliminary orbits for both pairs and derived their masses along with other astrophysical quantities. However, consideration of stellar evolutionary models leads to a disagreement in the derived distance to the system (108.1 pc) and/or masses, which will perhaps be resolved by subsequent orbital refinement. The first ever real-time images at short wavelengths (<1 μm) of the faint companion to the astrometric binary μ Cas A component were easily made at 0.85 microns on 1994 August 28 and October 22, with movement noted between the two dates. The Δmag value was determined to be 4.9±0.1, and the separation on the two dates was 0".73 and 0".66. Combining our measurements with astrometric data from both Sproul and Allegheny Observatories, we make a simultaneous fit for a new master orbit and find masses of 0.742±0.059 and 0.173±0.011 Msun for A and B, respectively. From further analysis we derive a presumably primordial helium abundance f6r μ Cas of Y = 0.24±0.07 for an assumed age of 1010 yr and the latest measured metallicity of Z = 0.0021.

  18. Approximating the near-edge mass absorption coefficients for Ni using an ultra-thin bimetal foil

    DOE PAGES

    Alkire, Randall W.

    2016-11-01

    In an effort to improve the characteristics of a fluorescing metal-foil-based beam position monitor, a new bimetal ultra-thin (0.98/0.67 µm) Ti–Ni foil was introduced to replace an existing single-element ultra-thin 0.5 µm thick Cr foil. During characterization it was determined that absorption measurements on the bimetal foil could be used to fit the Ni mass absorption coefficients accurately in the vicinity of the NiKedge. Comparison with experimental results from the literature demonstrated that the fitting procedure produced coefficients with uncertainties of the order of ±1%. Once determined, these fit coefficients allowed the thickness of an independently mounted 8 µm thickmore » Ni foil to be computed from absorption measurements instead of relying on a tool-based measurement of the foil thickness. Using the 8 µm thick foil, a continuous map of Ni mass absorption coefficients was produced at 1 eV resolution throughout the near-edge region. Lastly, this high-resolution map marks a significant improvement over the existing NIST XCOM or FFAST database mass absorption coefficients, which have estimated errors of 10–20% for the near-edge region.« less

  19. Approximating the near-edge mass absorption coefficients for Ni using an ultra-thin bimetal foil

    SciTech Connect

    Alkire, Randall W.

    2016-11-01

    In an effort to improve the characteristics of a fluorescing metal-foil-based beam position monitor, a new bimetal ultra-thin (0.98/0.67 µm) Ti–Ni foil was introduced to replace an existing single-element ultra-thin 0.5 µm thick Cr foil. During characterization it was determined that absorption measurements on the bimetal foil could be used to fit the Ni mass absorption coefficients accurately in the vicinity of the NiKedge. Comparison with experimental results from the literature demonstrated that the fitting procedure produced coefficients with uncertainties of the order of ±1%. Once determined, these fit coefficients allowed the thickness of an independently mounted 8 µm thick Ni foil to be computed from absorption measurements instead of relying on a tool-based measurement of the foil thickness. Using the 8 µm thick foil, a continuous map of Ni mass absorption coefficients was produced at 1 eV resolution throughout the near-edge region. Lastly, this high-resolution map marks a significant improvement over the existing NIST XCOM or FFAST database mass absorption coefficients, which have estimated errors of 10–20% for the near-edge region.

  20. Investigation on fluid added mass effect in the modal response of a pump-turbine runner

    NASA Astrophysics Data System (ADS)

    Y He, L.; He, Y.; Y Luo, Y.; Wang, Z. W.

    2013-12-01

    With the improvement of technology and manufacturing level of hydraulic turbine, there is a trend to increase the power concentration of the units. As a consequence, heads, fluid velocities and rotational speeds are higher which lead to larger hydraulic excitation forces on the structures. Accordingly, vibration and high stress levels will arise, which may cause fatigue damage. Therefore, how to predict the natural frequencies and mode shapes of the runner during the design stage is of paramount importance. In this paper, numerical simulation to analyze the influence of the surrounding water in a pump-turbine runner modal has been carried out by using finite element method. The modal behavior of the runner in air and in water has been calculated. In addition, the added mass effect by comparing the natural frequencies and mode shapes in both cases has been determined. The results show that, due to the added mass effect of the surrounding water, natural frequencies are considerably reduced. The frequency reduction ratio (FRR) varies in a range of 0.06~0.43, depending on the mode shapes. Vibration amplitude and complexity of modes are the two main factors that affect the reduction ratio of runner natural frequencies. For the FRR of in-phase (IP) mode shapes, the vibration amplitude of each mode is considered to be the dominant reason. It is clear that the FRR decreases as the nodal diameter (ND) increases (except for 0ND). While for counter-phase (CP) mode shapes, with the frequency increases, the runner modes will become more and more complex, as a result of which, the FRR increases.

  1. Backscatter factors and mass energy-absorption coefficient ratios for diagnostic radiology dosimetry.

    PubMed

    Benmakhlouf, Hamza; Bouchard, Hugo; Fransson, Annette; Andreo, Pedro

    2011-11-21

    Backscatter factors, B, and mass energy-absorption coefficient ratios, (μ(en)/ρ)(w, air), for the determination of the surface dose in diagnostic radiology were calculated using Monte Carlo simulations. The main purpose was to extend the range of available data to qualities used in modern x-ray techniques, particularly for interventional radiology. A comprehensive database for mono-energetic photons between 4 and 150 keV and different field sizes was created for a 15 cm thick water phantom. Backscattered spectra were calculated with the PENELOPE Monte Carlo system, scoring track-length fluence differential in energy with negligible statistical uncertainty; using the Monte Carlo computed spectra, B factors and (μ(en)/ρ)(w, air) were then calculated numerically for each energy. Weighted averaging procedures were subsequently used to convolve incident clinical spectra with mono-energetic data. The method was benchmarked against full Monte Carlo calculations of incident clinical spectra obtaining differences within 0.3-0.6%. The technique used enables the calculation of B and (μ(en)/ρ)(w, air) for any incident spectrum without further time-consuming Monte Carlo simulations. The adequacy of the extended dosimetry data to a broader range of clinical qualities than those currently available, while keeping consistency with existing data, was confirmed through detailed comparisons. Mono-energetic and spectra-averaged values were compared with published data, including those in ICRU Report 74 and IAEA TRS-457, finding average differences of 0.6%. Results are provided in comprehensive tables appropriated for clinical use. Additional qualities can easily be calculated using a designed GUI interface in conjunction with software to generate incident photon spectra.

  2. Relationship between body size, fill volume, and mass transfer area coefficient in peritoneal dialysis.

    PubMed

    Keshaviah, P; Emerson, P F; Vonesh, E F; Brandes, J C

    1994-04-01

    A peritoneal dialysate fill volume of 2 L has become the standard of clinical practice, but the relationships between body size, fill volume, and mass transfer area coefficient (KoA) have not been well established. These relationships were studied in 10 stable peritoneal dialysis patients who underwent six peritoneal equilibration studies (2 h each) at fill volumes of 0.5, 1, 1.5, 2, 2.5, and 3 L. The concentration-time profiles for urea, creatinine, and glucose were measured at each fill volume, and residual volumes were calculated from the preceding dwell period. A modified Henderson equation was used to calculate the KoA for the three solutes as a function of fill volume. By normalizing the KoA for each solute to the value at 2 L, the data for all three solutes collapsed onto the same trend line when plotting the normalized KoA versus dialysate volume. Between 0.5- and 2-L fill volumes, the average normalized KoA increases in an almost linear fashion, its value almost doubling over this range. Between 2- and 3-L fill volumes, there is less than a 10% change in the normalized KoA. However, fill volumes for peak urea KoA were found to increase with increasing body surface area (R = 0.76), being around 2.5 L for an average-sized patient and increasing to between 3 and 3.5 L for body surface areas > 2 m2. To maximize solute transport, these relationships between body size, volume, and KoA should be considered when choosing fill volumes for continuous ambulatory peritoneal dialysis and automated peritoneal dialysis and when deciding reserve and tidal volumes for tidal peritoneal dialysis.

  3. Electrospray ionization mass spectrometric detection of low polar compounds by adding NaAuCl4.

    PubMed

    Moriwaki, Hiroshi

    2016-11-01

    Liquid chromatography electrospray ionization mass spectrometry (LC/ESI/MS) has been widely used for various analyses. However, it is difficult to use LC/ESI/MS for the analysis of low polar compounds, such as polycyclic aromatic hydrocarbons. It is well known that AuCl4(-) ion decomposes to AuCl3 by heating, and AuCl3 is a strong π-electrophilic Lewis acid. Low polar compounds (pyrene, benzo[a]pyrene, perylene, benzo[ghi]perylene, dibenzothiophene and p-dimethoxybenzene) were detected by ESI/MS in the positive ion mode by adding NaAuCl4 . The low polar compound interacts with AuCl3 formed at the ESI interface, and undergoes electron transfer to AuCl3 . The radical cation of the low polar compound was then detected by MS. In addition, the LC/ESI/MS determination of polycyclic aromatic hydrocarbons by the post-column addition of NaAuCl4 was studied. © 2016 The Authors Journal of Mass Spectrometry Published by John Wiley & Sons Ltd.

  4. Evaluation of interfacial mass transfer coefficient as a function of temperature and pressure in carbon dioxide/normal alkane systems

    NASA Astrophysics Data System (ADS)

    Nikkhou, Fatemeh; Keshavarz, Peyman; Ayatollahi, Shahab; Jahromi, Iman Raoofi; Zolghadr, Ali

    2015-04-01

    CO2 gas injection is known as one of the most popular enhanced oil recovery techniques for light and medium oil reservoirs, therefore providing an acceptable mass transfer mechanism for CO2-oil systems seems necessary. In this study, interfacial mass transfer coefficient has been evaluated for CO2-normal heptane and CO2-normal hexadecane systems using equilibrium and dynamic interfacial tension data, which have been measured using the pendant drop method. Interface mass transfer coefficient has been calculated as a function of temperature and pressure in the range of 313-393 K and 1.7-8.6 MPa, respectively. The results showed that the interfacial resistance is a parameter that can control the mass transfer process for some CO2-normal alkane systems, and cannot be neglected. Additionally, it was found that interface mass transfer coefficient increased with pressure. However, the variation of this parameter with temperature did not show a clear trend and it was strongly dependent on the variation of diffusivity and solubility of CO2 in the liquid phase.

  5. Determination of the external mass transfer coefficient and influence of mixing intensity in moving bed biofilm reactors for wastewater treatment.

    PubMed

    Nogueira, Bruno L; Pérez, Julio; van Loosdrecht, Mark C M; Secchi, Argimiro R; Dezotti, Márcia; Biscaia, Evaristo C

    2015-09-01

    In moving bed biofilm reactors (MBBR), the removal of pollutants from wastewater is due to the substrate consumption by bacteria attached on suspended carriers. As a biofilm process, the substrates are transported from the bulk phase to the biofilm passing through a mass transfer resistance layer. This study proposes a methodology to determine the external mass transfer coefficient and identify the influence of the mixing intensity on the conversion process in-situ in MBBR systems. The method allows the determination of the external mass transfer coefficient in the reactor, which is a major advantage when compared to the previous methods that require mimicking hydrodynamics of the reactor in a flow chamber or in a separate vessel. The proposed methodology was evaluated in an aerobic lab-scale system operating with COD removal and nitrification. The impact of the mixing intensity on the conversion rates for ammonium and COD was tested individually. When comparing the effect of mixing intensity on the removal rates of COD and ammonium, a higher apparent external mass transfer resistance was found for ammonium. For the used aeration intensities, the external mass transfer coefficient for ammonium oxidation was ranging from 0.68 to 13.50 m d(-1) and for COD removal 2.9 to 22.4 m d(-1). The lower coefficient range for ammonium oxidation is likely related to the location of nitrifiers deeper in the biofilm. The measurement of external mass transfer rates in MBBR will help in better design and evaluation of MBBR system-based technologies.

  6. On the determinatino of high-pressure mass-diffusion coefficients for binary mixtures

    NASA Technical Reports Server (NTRS)

    Bellan, J.; Harstad, K.

    2003-01-01

    A model for high-pressure binary diffusion coefficient calculation is proposed based on considerations originating from recasting both the low pressure kinetic theory and the Stokes-Einstein infinite dilution expressions into forms consistent with corresponding states theory.

  7. An experimental determination of the H2S overall mass transfer coefficient from quiescent surfaces at wastewater treatment plants

    NASA Astrophysics Data System (ADS)

    Santos, Jane Meri; Kreim, Virginie; Guillot, Jean-Michel; Reis, Neyval Costa; de Sá, Leandro Melo; Horan, Nigel John

    2012-12-01

    This study has investigated overall mass transfer coefficients of hydrogen sulphide from quiescent liquid surfaces under simulated laboratory conditions. Wind flow (friction velocity) has been correlated with the overall mass transfer coefficient (KL) of hydrogen sulphide in the liquid phase using a wind tunnel study. The experimental values for this coefficient have been compared with predicted KL values obtained from three different emission models that are widely used to determine volatilization rates from the quiescent surfaces of wastewater treatment unit processes. Friction velocity (in a range of 0.11 and 0.27 m s-1) was found to have a negligible influence on the overall mass transfer coefficients for hydrogen sulphide but by contrast two of the models predicted a stronger influence of friction velocity and overestimate the KL values by up to a factor of 12.5, thus risking unnecessary expenditure on odour control measures. However, at low wind speeds or friction velocities, when more odour complaints might be expected due to poor atmospheric dispersion, a better agreement of emission rates with experimental data was found for all the models.

  8. Mass attenuation coefficient of binderless, pre-treated and tannin-based Rhizophora spp. particleboards using 16.59 – 25.26 keV photon energy range

    SciTech Connect

    Mohd Yusof, Mohd Fahmi Hamid, Puteri Nor Khatijah Abdul; Tajuddin, Abdul Aziz; Bauk, Sabar; Hashim, Rokiah

    2015-04-29

    The Rhizophora spp. particleboards were fabricated using ≤ 104 µm particle size at three different fabrication methods; binderless, steam pre-treated and tannin-added. The mass attenuation coefficient of Rhizophora spp. particleboards were measured using x-ray fluorescent (XRF) photon from niobium, molybdenum, palladium, silver and tin metal plates that provided photon energy between 16.59 to 25.26 keV. The results were compared to theoretical values for water calculated using photon cross-section database (XCOM).The results showed that all Rhizophora spp. particleboards having mass attenuation coefficient close to calculated XCOM for water. Tannin-added Rizophora spp. particleboard was nearest to calculated XCOM for water with χ2 value of 13.008 followed by binderless Rizophora spp. (25.859) and pre-treated Rizophora spp. (91.941)

  9. Methamphetamine absorption by skin lipids: accumulated mass, partition coefficients, and the influence of fatty acids.

    PubMed

    Parker, K; Morrison, G

    2016-08-01

    Occupants of former methamphetamine laboratories, often residences, may experience increased exposure through the accumulation of the methamphetamine in the organic films that coat skin and indoor surfaces. The objectives of this study were to determine equilibrium partition coefficients of vapor-phase methamphetamine with artificial sebum (AS-1), artificial sebum without fatty acids (AS-2), and real skin surface films, herein called skin oils. Sebum and skin oil-coated filters were exposed to vapor-phase methamphetamine at concentrations ranging from 8 to 159 ppb, and samples were analyzed for exposure time periods from 2 h to 60 days. For a low vapor-phase methamphetamine concentration range of ~8-22 ppb, the equilibrium partition coefficient for AS-1 was 1500 ± 195 μg/g/ppb. For a high concentration range of 98-112 ppb, the partition coefficient was lower, 459 ± 80 μg/g/ppb, suggesting saturation of the available absorption capacity. The low partition coefficient for AS-2 (33 ± 6 μg/g/ppb) suggests that the fatty acids in AS-1 and skin oil are responsible for much high partition coefficients. We predict that the methamphetamine concentration in skin lipids coating indoor surfaces can exceed recommended surface remediation standards even for air concentrations well below 1 ppb.

  10. Studies on mass energy-absorption coefficients and effective atomic energy-absorption cross sections for carbohydrates

    NASA Astrophysics Data System (ADS)

    Ladhaf, Bibifatima M.; Pawar, Pravina P.

    2015-04-01

    We measured here the mass attenuation coefficients (μ/ρ) of carbohydrates, Esculine (C15H16O9), Sucrose (C12H22O11), Sorbitol (C6H14O6), D-Galactose (C6H12O6), Inositol (C6H12O6), D-Xylose (C5H10O5) covering the energy range from 122 keV up to 1330 keV photon energies by using gamma ray transmission method in a narrow beam good geometry set-up. The gamma-rays were detected using NaI(Tl) scintillation detection system with a resolution of 8.2% at 662 keV. The attenuation coefficient data were then used to obtain the total attenuation cross-section (σtot), molar extinction coefficients (ε), mass-energy absorption coefficients (μen/ρ) and effective (average) atomic energy-absorption cross section (σa,en) of the compounds. These values are found to be in good agreement with the theoretical values calculated based on XCOM data.

  11. Determination of the mass-transfer coefficient in liquid phase in a stream-bubble contact device

    NASA Astrophysics Data System (ADS)

    Dmitriev, A. V.; Dmitrieva, O. S.; Madyshev, I. N.

    2016-09-01

    One of the most effective energy saving technologies is the improvement of existing heat and mass exchange units. A stream-bubble contact device is designed to enhance the operation efficiency of heat and mass exchange units. The stages of the stream-bubble units that are proposed by the authors for the decarbonization process comprise contact devices with equivalent sizes, whose number is determined by the required performance of a unit. This approach to the structural design eliminates the problems that arise upon the transition from laboratory samples to industrial facilities and makes it possible to design the units of any required performance without a decrease in the effectiveness of mass exchange. To choose the optimal design that provides the maximum effectiveness of the mass-exchange processes in units and their intensification, the change of the mass-transfer coefficient is analyzed with the assumption of a number of parameters. The results of the study of the effect of various structural parameters of a stream-bubble contact device on the mass-transfer coefficient in the liquid phase are given. It is proven that the mass-transfer coefficient increases in the liquid phase, in the first place, with the growth of the level of liquid in the contact element, because the rate of the liquid run-off grows in this case and, consequently, the time of surface renewal is reduced; in the second place, with an increase in the slot diameter in the downpipe, because the jet diameter and, accordingly, their section perimeter and the area of the surface that is immersed in liquid increase; and, in the third place, with an increase in the number of slots in the downpipe, because the area of the surface that is immersed in the liquid of the contact element increases. Thus, in order to increase the mass-transfer coefficient in the liquid phase, it is necessary to design the contact elements with a minimum width and a large number of slots and their increased diameter; in

  12. The effect of microbubbles on gas-liquid mass transfer coefficient and degradation rate of COD in wastewater treatment.

    PubMed

    Yao, Kangning; Chi, Yong; Wang, Fei; Yan, Jianhua; Ni, Mingjiang; Cen, Kefa

    2016-01-01

    A commonly used aeration device at present has the disadvantages of low mass transfer rate because the generated bubbles are several millimeters in diameter which are much bigger than microbubbles. Therefore, the effect of a microbubble on gas-liquid mass transfer and wastewater treatment process was investigated. To evaluate the effect of each bubble type, the volumetric mass transfer coefficients for microbubbles and conventional bubbles were determined. The volumetric mass transfer coefficient was 0.02905 s(-1) and 0.02191 s(-1) at a gas flow rate of 0.67 L min(-1) in tap water for microbubbles and conventional bubbles, respectively. The degradation rate of simulated municipal wastewater was also investigated, using aerobic activated sludge and ozone. Compared with the conventional bubble generator, the chemical oxygen demand (COD) removal rate was 2.04, 5.9, 3.26 times higher than those of the conventional bubble contactor at the same initial COD concentration of COD 200 mg L(-1), 400 mg L(-1), and 600 mg L(-1), while aerobic activated sludge was used. For the ozonation process, the rate of COD removal using microbubble generator was 2.38, 2.51, 2.89 times of those of the conventional bubble generator. Based on the results, the effect of initial COD concentration on the specific COD degradation rate were discussed in different systems. Thus, the results revealed that microbubbles could enhance mass transfer in wastewater treatment and be an effective method to improve the degradation of wastewater.

  13. MASS TRANSFER COEFFICIENTS FOR A NON-NEWTONIAN FLUID AND WATER WITH AND WITHOUT ANTI-FOAM AGENTS

    SciTech Connect

    Leishear, R.

    2009-09-09

    Mass transfer rates were measured in a large scale system, which consisted of an 8.4 meter tall by 0.76 meter diameter column containing one of three fluids: water with an anti-foam agent, water without an anti-foam agent, and AZ101 simulant, which simulated a non-Newtonian nuclear waste. The testing contributed to the evaluation of large scale mass transfer of hydrogen in nuclear waste tanks. Due to its radioactivity, the waste was chemically simulated, and due to flammability concerns oxygen was used in lieu of hydrogen. Different liquids were used to better understand the mass transfer processes, where each of the fluids was saturated with oxygen, and the oxygen was then removed from solution as air bubbled up, or sparged, through the solution from the bottom of the column. Air sparging was supplied by a single tube which was co-axial to the column, the decrease in oxygen concentration was recorded, and oxygen measurements were then used to determine the mass transfer coefficients to describe the rate of oxygen transfer from solution. Superficial, average, sparging velocities of 2, 5, and 10 mm/second were applied to each of the liquids at three different column fill levels, and mass transfer coefficient test results are presented here for combinations of superficial velocities and fluid levels.

  14. Henry's law constant and overall mass transfer coefficient for formaldehyde emission from small water pools under simulated indoor environmental conditions.

    PubMed

    Liu, Xiaoyu; Guo, Zhishi; Roache, Nancy F; Mocka, Corey A; Allen, Matt R; Mason, Mark A

    2015-02-03

    The Henry's law constant (HLC) and the overall mass transfer coefficient are both important parameters for modeling formaldehyde emissions from aqueous solutions. In this work, the apparent HLCs for formaldehyde aqueous solutions were determined in the concentration range from 0.01% to 1% (w/w) and at different temperatures (23, 40, and 55 °C) by a static headspace extraction method. The aqueous solutions tested included formaldehyde in water, formaldehyde-water with nonionic surfactant Tergitol NP-9, and formaldehyde-water with anionic surfactant sodium dodecyl sulfate. Overall, the measured HLCs ranged from 8.33 × 10(-6) to 1.12 × 10(-4) (gas-concentration/aqueous-concentration, dimensionless). Fourteen small-chamber tests were conducted with formaldehyde solutions in small pools. By applying the measured HLCs, the formaldehyde overall liquid-phase mass transfer coefficients (KOLs) were determined to be in the range of 8.12 × 10(-5) to 2.30 × 10(-4) m/h, and the overall gas-phase mass transfer coefficients were between 2.84 and 13.4 m/h. The influences of the formaldehyde concentration, temperature, agitation rate, and surfactant on HLC and KOL were investigated. This study provides useful data to support source modeling for indoor formaldehyde originating from the use of household products that contain formaldehyde-releasing biocides.

  15. Extension of the Inverse Adding-Doubling Method to the Measurement of Wavelength-Dependent Absorption and Scattering Coefficients of Biological Samples

    SciTech Connect

    Baba, Justin S; Allegood, Marcus S

    2008-01-01

    Light interaction with biological tissue can be described using three parameters: the scattering and absorption coefficients (us and ua), as well as the anisotropy (g) which describes the directional dependence of the scattered photons. Accurately determining these optical properties for different tissue types at specific wavelengths, and simultaneously, would be beneficial for a variety of different biomedical applications. The goal of this project was to take a user-defined g-value and determine the remaining two parameters for a specified wavelength range for an integrating sphere with a collimated white light input source system. A fully automated computer program and process was developed to collect data for all wavelengths in a timely and accurate manner. LabVIEW was used to write programs to automate: raw intensity data collection from a spectrometer equipped integrating sphere, conversion of the data into a format for analysis via Scott Prahl's Inverse Adding-Doubling (IAD) C code execution, and computation of the optical properties based on the output from the IAD code. To allow data to be passed efficiently between LabVIEW and C code program modules, the two were combined into a single program (OPT 3.1). OPT 3.1 was tested using tissue mimicking phantoms and determination of the absorption and scattering coefficients showed excellent agreement with theory for wavelengths were the user inputted single g-value was sufficiently precise. Future improvements entail providing for multi-wavelength g-value entry to extend the accuracy of results to encompass the complete system multispectral range. Ultimately, the data collection process and algorithms developed through this effort will be used to study actual biological tissues for the purpose of deriving and refining models for light-tissue interactions.

  16. Evaluation of different C20 coefficients for the determination of ice mass loss in Antarctica and Greenland

    NASA Astrophysics Data System (ADS)

    Haberkorn, Christoph; Bloßfeld, Mathis; Bouman, Johannes; Fuchs, Martin; McMillan, Malcolm

    2015-04-01

    Large ice sheets cover the regions at North Pole and South Pole, Arctic and Antarctica. Due to global warming, these ice sheets experience changes. Depending on the location, ice sheets are melting or accumulating ice. These changes can be detected using geodetic space techniques like altimetry and satellite gravimetry. The CryoSat-2 mission is a special altimetry mission to observe the Earth's cryosphere and detect ice mass changes. It was launched in 2010. The satellite gravimetry missions GRACE and GOCE started earlier in 2003 and 2009. Both techniques, altimetry and gravimetry, provide data to compute the ice mass changes. The main observable of altimetry is the elevation change caused by melting and accumulating ice, whereas gravimetry observes changes in the Earth's gravity field due to mass changes. In our study we use data of GRACE and GOCE for a period between November 2010 and September 2013. This allows to directly compare the results with results obtained from CryoSat-2 mission. GRACE is suitable to measure the long wavelength part of the Earth's gravity field, whereas GOCE is projected to detect its shorter wavelength parts. Gravity gradients derived from GRACE monthly fields are combined with directly measured GOCE gradients by filtering the data along the orbit. GRACE is used up to 10 mHz, GOCE from 10 mHz up to 150 mHz. This data set does not include the polar gap of GOCE, which is filled up with GRACE only data. We use this data set to compute monthly solutions of spheric harmonic coefficients, which are then transformed to equivalent water height (EWH) values on a grid. In addition, they are summed up to obtain ice mass loss. Therefore, the pole regions are divided into smaller basins. As both gravimetry missions are not suited to detect the spheric harmonic coefficient C20 with sufficient accuracy, it has to be replaced. The coefficient C20 describes the flattening of the Earth and has therefore a large influence at the polar regions. We use time

  17. A method for estimating distributions of mass transfer rate coefficients with application to purging and batch experiments

    NASA Astrophysics Data System (ADS)

    Hollenbeck, K. J.; Harvey, C. F.; Haggerty, R.; Werth, C. J.

    1999-04-01

    Mass transfer between aquifer material and groundwater is often modeled as first-order rate-limited sorption or diffusive exchange between mobile zones and immobile zones with idealized geometries. Recent improvements in experimental techniques and advances in our understanding of pore-scale heterogeneity demonstrate that two (or even a few) rate coefficients are insufficient in many cases. Here, we investigate a piece-wise linear model for a continuous distribution of rate coefficients, that has several advantages over previously used `statistical' distribution models (with functional form from gamma or lognormal PDF's): (1) distributions of arbitrary, even bimodal, shapes can be represented; (2) linear estimation methods can be applied to determine the distribution from experimental data; (3) the uncertainty in the distribution can be determined for each of its sections; and (4) the relationship between the time scales of available data and those of estimatable mass transfer processes can be investigated. A statistical model refinement algorithm is presented that reduces the number of parameters (sections of the piece-wise linear model) to the admissible minimum. We show that purging experiments allow estimation of a wider zone of the rate distribution than do batch experiments, and hence will provide predictions that are accurate over a wider range of time scales. Finally, in an application to TCE gas-purging desorption data, the piece-wise linear rate-distribution model has a higher probability of being adequate than those using a gamma or lognormal distribution or a single rate coefficient.

  18. Feasibility Study of a Wearable Exoskeleton for Children: Is the Gait Altered by Adding Masses on Lower Limbs?

    PubMed Central

    Rossi, Stefano; Colazza, Alessandra; Petrarca, Maurizio; Castelli, Enrico; Cappa, Paolo; Krebs, Hermano Igo

    2013-01-01

    We are designing a pediatric exoskeletal ankle robot (pediatric Anklebot) to promote gait habilitation in children with Cerebral Palsy (CP). Few studies have evaluated how much or whether the unilateral loading of a wearable exoskeleton may have the unwanted effect of altering significantly the gait. The purpose of this study was to evaluate whether adding masses up to 2.5 kg, the estimated overall added mass of the mentioned device, at the knee level alters the gait kinematics. Ten healthy children and eight children with CP, with light or mild gait impairment, walked wearing a knee brace with several masses. Gait parameters and lower-limb joint kinematics were analyzed with an optoelectronic system under six conditions: without brace (natural gait) and with masses placed at the knee level (0.5, 1.0, 1.5, 2.0, 2.5 kg). T-tests and repeated measures ANOVA tests were conducted in order to find noteworthy differences among the trial conditions and between loaded and unloaded legs. No statistically significant differences in gait parameters for both healthy children and children with CP were observed in the five “with added mass” conditions. We found significant differences among “natural gait” and “with added masses” conditions in knee flexion and hip extension angles for healthy children and in knee flexion angle for children with CP. This result can be interpreted as an effect of the mechanical constraint induced by the knee brace rather than the effect associated with load increase. The study demonstrates that the mechanical constraint induced by the brace has a measurable effect on the gait of healthy children and children with CP and that the added mass up to 2.5 kg does not alter the lower limb kinematics. This suggests that wearable devices weighing 25 N or less will not noticeably modify the gait patterns of the population examined here. PMID:24023822

  19. Thermal and mechanical analysis on the cold mass support assembly of test cryomodule for IMP ADS-injector-II

    NASA Astrophysics Data System (ADS)

    Guo, X. L.; Wang, L.; Wang, J.; Wang, S. Y.; Liu, Y. Y.; Sun, S.

    2014-01-01

    The Injector-II of ADS project will include two cryomodules, each of which consists of eight HWR cavities and nine SC solenoid magnets. A test cryomodule (TCM1) containing one HWR cavity and two SC magnets was developed for verification of related technique at the first stage. The TCM1 cryostat was designed by Shanghai Institute of Applied Physics of Chinese Academy of Sciences (SINAP, CAS). The cold mass support assembly in the test cryomodule should accommodate the unbalanced loads induced by each cold mass assembly, the deformation induced by thermal shrinkage, and the thermal stress between different materials. In order to validate the structure design, coupled thermal and mechanical analysis on the cold mass support assembly was performed. The temperature, deformation and stress of the cold mass support assembly were obtained. The results effectively provide the guideline for the design and improvement of the cold mass support assembly.

  20. Study of mass attenuation coefficients and effective atomic numbers of bismuth-ground granulated blast furnace slag concretes

    NASA Astrophysics Data System (ADS)

    Kumar, Sandeep; Singh, Sukhpal

    2016-05-01

    Five samples of Bismuth-Ground granulated blast furnace slag (Bi-GGBFS) concretes were prepared using composition (0.6 cement + x Bi2O3 + (0.4-x) GGBFS, x = 0.05, 0.10, 0.15, 0.20 and 0.25) by keeping constant water (W) cement (C) ratio. Mass attenuation coefficients (μm) of these prepared samples were calculated using a computer program winXCOM at different gamma ray energies, whereas effective atomic numbers (Zeff) is calculated using mathematical formulas. The radiation shielding properties of Bi-GGBFS concrete has been compared with standard radiation shielding concretes.

  1. Comparison of experimental methods for determination of the volumetric mass transfer coefficient in fermentation processes

    NASA Astrophysics Data System (ADS)

    Tobajas, M.; García-Calvo, E.

    Mass transfer in bioreactors has been examined. In the present work, dynamic methods are used for the determination of KLa values for water, model media and a fermentation broth (Candida utilis) in an airlift reactor. The conventional dynamic method is applied at the end of the microbial process in order to avoid an alteration in the metabolism of the microorganisms. New dynamic methods are used to determine KLa in an airlift reactor during the microbial growth of Candida utilis on glucose. One of the methods is based on the continuous measurement of carbon dioxide production while the other method is based on the relationship between the oxygen transfer and biomass growth rates. These methods of determining KLa does not interfere with the microorganisms action. A theoretical mass transfer model has been used for KLa estimation for the systems described above. Some differences between calculated and measured values are found for fermentation processes due to the model is developed for two-phase air-water systems. Nevertheless, the average deviation between the predicted values and those obtained from the relationship between oxygen transfer and biomass production rates are lower than 25% in any case.

  2. A study on the characteristic behavior of mass inclusions added to a poro-elastic layer

    NASA Astrophysics Data System (ADS)

    Idrisi, Kamal; Johnson, Marty E.; Theurich, Daniel; Carneal, James P.

    2010-09-01

    Heterogeneous (HG) blankets consist of a layer of poro-elastic media with small embedded masses that replicate the behavior of a distributed mass-spring-damper system. The concept of an HG blanket used to control the sound transmission through an aircraft double-panel system has already been developed and cited in the present literature. However, deficiencies in methodical property control exist; therefore, the prime objective of this research is to provide a simple method to predict and control material properties of the heterogeneous blankets through alteration of mass and stiffness parameters. Mass inclusion size, shape, and placement were varied. If optimized heterogeneous (HG) blankets targeted to specific applications are to be successfully developed, control of these parameters is necessary. This research offers a detailed analysis of the behavior of the mass inclusions, highlighting controlled stiffness variation of the mass-spring-damper systems inside the HG blanket. Characteristic parameters of the HG blanket like the "footprint," "effective area," and the "mass interaction distance" are defined and confirmed through mathematical calculations and experimental results. A novel, empirical approach to predict the natural frequency of different mass shapes embedded in porous media was derived and experimentally verified for many different types of porous media, including melamine foam, polyurethane, and polyamide. A maximum error of 8% existed for all the predictions made in this document.

  3. Assessment of natural radiation exposure levels and mass attenuation coefficients of lime and gypsum samples used in Turkey.

    PubMed

    Damla, Nevzat; Cevik, Uğur; Kobya, Ali Ihsan; Celik, Ahmet; Celik, Necati

    2010-11-01

    The activity concentrations of 226Ra, 232Th, and 40K in lime and gypsum samples used as building materials in Turkey were measured using gamma spectrometry. The mean activity concentrations of 226Ra, 232Th, and 40K were found to be 38±16, 20±9, and 156±54 Bq kg(-1) for lime and found to be 17±6, 13±5, and 429±24 Bq kg(-1) for gypsum, respectively. The radiological hazards due to the natural radioactivity in the samples were inferred from calculations of radium equivalent activities (Raeq), indoor absorbed dose rate in the air, the annual effective dose, and gamma and alpha indices. These radiological parameters were evaluated and compared with the internationally recommended limits. The experimental mass attenuation coefficients (μ/ρ) of the samples were determined in the energy range 81-1,332 keV. The experimental mass attenuation coefficients were compared with theoretical values obtained using XCOM. It is found that the calculated values and the experimental results are in good agreement.

  4. Prediction of broadband attenuation computed using band-averaged mass extinction coefficients and band-averaged transmittance

    NASA Astrophysics Data System (ADS)

    Farmer, W. M.

    1991-09-01

    A common method of estimating the attenuation capabilities of military smokes/obscurants is to use a band-averaged mass-extinction coefficient with concentration-length values in the Beer-Bouguer transmission law. This approach ignores the effects of source spectra, sensor response, and normal atmospheric attenuation on broadband transmittance characteristics, which can significantly affect broadband transmittance. The differences that can occur in predicting relative transmittance as a function of concentration length by using band-averaged mass-extinction coefficients as opposed to more properly computing the band-averaged transmittance are discussed in this paper. Two examples are provided to illustrate the differences in results. The first example considers 3- to 5-micron and 8- to 14-micron band transmission through natural fogs. The second example considers 3- to 5-micron and 8- to 12-micron transmission through phosphorus-derived smoke (a common military obscurant) produced at 17 percent and at 90 percent relative humidity. Major differences are found in the values of concentration lengths predicted by the two methods when the transmittance relative to an unobscured atmosphere falls below about 20 percent. These results can affect conclusions concerning the detection of targets in smokes screens, smoke concentration lengths required to obscure a target, and radiative transport through polluted atmospheres.

  5. Value of apparent diffusion coefficient measurement for discrimination of focal benign and malignant hepatic masses.

    PubMed

    Kilickesmez, O; Bayramoglu, S; Inci, E; Cimilli, T

    2009-02-01

    The purpose of our study was to investigate the value of diffusion-weighted magnetic resonance imaging (DW-MRI) to discriminate benign and malignant focal lesions of the liver using parallel imaging technique. A total of 77 patients and 65 healthy controls were enrolled in the study. DW-MRI was performed with b-factors of 0, 500 and 1000 s/mm(2), and the apparent diffusion coefficients (ADC) values of the normal liver and the lesions were calculated. The mean ADC value of the focal liver lesions were as follows: simple cysts (3.16 +/- 0.18 x 10(-3) mm(2)/s), hydatid cysts (2.58 +/- 0.53 x 10(-3) mm(2)/s), hemangiomas (1.97 +/- 0.49 x 10(-3) mm(2)/s), metastases (1.14 +/- 0.41 x 10(-3) mm(2)/s) and hepatocellular carcinomas (HCC) (1.15 +/- 0.36 x 10(-3) mm(2)/s). The mean ADC values of all the disease groups were statistically significant when compared with the mean ADC value of the normal liver (1.56 +/- 0.14 x 10(-3) mm(2)/s), (P < 0.01). There were also statistically significant differences among the ADC values of hemangiomas and HCC metastases (P < 0.01), and simple and hydatid cysts (P < 0.008). However, there was no statistically significant difference between HCC and metastases. The present study showed that ADC measurement has the potential to differentiate benign and malignant focal hepatic lesions. We propose to add DW sequence in the MR protocol for the detection and quantitative discrimination of hepatic pathologies.

  6. Imaging of Cells and Tissues with Mass Spectrometry: Adding Chemical Information to Imaging

    PubMed Central

    Zimmerman, Tyler A.; Monroe, Eric B.; Tucker, Kevin R.; Rubakhin, Stanislav S.; Sweedler, Jonathan V.

    2009-01-01

    Techniques that map the distribution of compounds in biological tissues can be invaluable in addressing a number of critical questions in biology and medicine. One of the newest methods, mass spectrometric imaging, has enabled investigation of spatial localization for a variety of compounds ranging from atomics to proteins. The ability of mass spectrometry to detect and differentiate a large number of unlabeled compounds makes the approach amenable to the study of complex biological tissues. This chapter focuses on recent advances in the instrumentation and sample preparation protocols that make mass spectrometric imaging of biological samples possible, including strategies for both tissue and single cell imaging using the following mass spectrometric ionization methods: matrix-assisted laser desorption/ionization, secondary ion, electrospray and desorption electrospray. PMID:19118682

  7. Charge carrier effective mass and concentration derived from combination of Seebeck coefficient and Te125 NMR measurements in complex tellurides

    DOE PAGES

    Levin, E. M.

    2016-06-27

    Thermoelectric materials utilize the Seebeck effect to convert heat to electrical energy. The Seebeck coefficient (thermopower), S, depends on the free (mobile) carrier concentration, n, and effective mass, m*, as S ~ m*/n2/3. The carrier concentration in tellurides can be derived from 125Te nuclear magnetic resonance (NMR) spin-lattice relaxation measurements. The NMR spin-lattice relaxation rate, 1/T1, depends on both n and m* as 1/T1~(m*)3/2n (within classical Maxwell-Boltzmann statistics) or as 1/T1~(m*)2n2/3 (within quantum Fermi-Dirac statistics), which challenges the correct determination of the carrier concentration in some materials by NMR. Here it is shown that the combination of the Seebeck coefficientmore » and 125Te NMR spin-lattice relaxation measurements in complex tellurides provides a unique opportunity to derive the carrier effective mass and then to calculate the carrier concentration. This approach was used to study AgxSbxGe50–2xTe50, well-known GeTe-based high-efficiency tellurium-antimony-germanium-silver thermoelectric materials, where the replacement of Ge by [Ag+Sb] results in significant enhancement of the Seebeck coefficient. Thus, values of both m* and n derived using this combination show that the enhancement of thermopower can be attributed primarily to an increase of the carrier effective mass and partially to a decrease of the carrier concentration when the [Ag+Sb] content increases.« less

  8. Adding the Long-Term Perspective: Tien Shan's Glacier Mass Change during 1961-2012

    NASA Astrophysics Data System (ADS)

    Farinotti, D.; Longuevergne, L.; Moholdt, G.; Duethmann, D.; Bolch, T.; Vorogushyn, S.; Guntner, A.; Gafurov, A.

    2014-12-01

    The Tien Shan, Central Asia's major mountain range, has recently been the focus of a series of studies targeting changes in meteorological variables, glacier mass and extent, as well as runoff. Reviews have repeatedly highlighted the importance of glacier melt for total runoff on the one hand, but the scarcity of direct glaciological observation on the other. At the regional to global scale, the lack of such direct observations has been tackled by using remotely sensed products such as satellite gravimetry and altimetry, but the covered time frame is typically in the order of one decade, thus hampering robust assessments. Here, an ensemble of approaches based on the Gravity Recovery and Climate Experiment (GRACE), the Ice, Cloud and land Elevation Satellite (ICESat), and in-situ glacier mass balance measurements is used for estimating glacier mass changes in the Tien Shan during the last decade, and for validating a glacier mass balance model that we subsequently use for reconstructing a continuous mass balance time series over the last half-century. The model ensemble is designed to take into account a wide range of uncertainty sources including often-neglected differences such as data sources or model structure. We cross-validate our different approaches during the period 2003-2009, and find an average glacier mass change of -6.1±4.4 Gt/a, thus confirming previously published estimates. We use the glaciological modelling approach to extend our estimates over the period 1961-2012, and gain insights in the spatial and temporal evolution of the regional glacier melt. Estimated melt rates are in turn used for assessing the contribution of glacier melt to the total runoff of major hydrological basins, and indicate that the contribution from glaciers has likely been overestimated in a series of previous studies.

  9. Differences in concentration lengths computed using band-averaged mass extinction coefficients and band-averaged transmittance

    NASA Astrophysics Data System (ADS)

    Farmer, W. Michael

    1990-09-01

    An understanding of how broad-band transmittance is affected by the atmosphere is crucial to accurately predicting how broad-band sensors such as FLIRs will perform. This is particularly true for sensors required to function in an environment where countermeasures such as smokes/obscurants have been used to limit sensor performance. A common method of estimating the attenuation capabilities of smokes/obscurants released in the atmosphere to defeat broad-band sensors is to use a band averaged extinction coefficient with concentration length values in the Beer-Bouguer transmission law. This approach ignores the effects of source spectra, sensor response, and normal atmospheric attenuation, and can lead to results for band averages of the relative transmittance that are significantly different from those obtained using the source spectra, sensor response, and normal atmospheric transmission. In this paper we discuss the differences that occur in predicting relative transmittance as a function of concentration length using band-averaged mass extinction coefficients or computing the band-averaged transmittance as a function of source spectra. Two examples are provided to illustrate the differences in results. The first example is applicable to 8- to l4-um band transmission through natural fogs. The second example considers 3- to 5-um transmission through phosphorus smoke produced at 17% and 90% relative humidity. The results show major differences in the prediction of concentration length values by the two methods when the relative transmittance falls below about 20%.

  10. Spatial and temporal distribution of mass loss from the Greenland Ice Sheet since AD 1900.

    PubMed

    Kjeldsen, Kristian K; Korsgaard, Niels J; Bjørk, Anders A; Khan, Shfaqat A; Box, Jason E; Funder, Svend; Larsen, Nicolaj K; Bamber, Jonathan L; Colgan, William; van den Broeke, Michiel; Siggaard-Andersen, Marie-Louise; Nuth, Christopher; Schomacker, Anders; Andresen, Camilla S; Willerslev, Eske; Kjær, Kurt H

    2015-12-17

    The response of the Greenland Ice Sheet (GIS) to changes in temperature during the twentieth century remains contentious, largely owing to difficulties in estimating the spatial and temporal distribution of ice mass changes before 1992, when Greenland-wide observations first became available. The only previous estimates of change during the twentieth century are based on empirical modelling and energy balance modelling. Consequently, no observation-based estimates of the contribution from the GIS to the global-mean sea level budget before 1990 are included in the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Here we calculate spatial ice mass loss around the entire GIS from 1900 to the present using aerial imagery from the 1980s. This allows accurate high-resolution mapping of geomorphic features related to the maximum extent of the GIS during the Little Ice Age at the end of the nineteenth century. We estimate the total ice mass loss and its spatial distribution for three periods: 1900-1983 (75.1 ± 29.4 gigatonnes per year), 1983-2003 (73.8 ± 40.5 gigatonnes per year), and 2003-2010 (186.4 ± 18.9 gigatonnes per year). Furthermore, using two surface mass balance models we partition the mass balance into a term for surface mass balance (that is, total precipitation minus total sublimation minus runoff) and a dynamic term. We find that many areas currently undergoing change are identical to those that experienced considerable thinning throughout the twentieth century. We also reveal that the surface mass balance term shows a considerable decrease since 2003, whereas the dynamic term is constant over the past 110 years. Overall, our observation-based findings show that during the twentieth century the GIS contributed at least 25.0 ± 9.4 millimetres of global-mean sea level rise. Our result will help to close the twentieth-century sea level budget, which remains crucial for evaluating the reliability of models used to

  11. Spatial and temporal distribution of mass loss from the Greenland Ice Sheet since AD 1900

    NASA Astrophysics Data System (ADS)

    Kjeldsen, Kristian K.; Korsgaard, Niels J.; Bjørk, Anders A.; Khan, Shfaqat A.; Box, Jason E.; Funder, Svend; Larsen, Nicolaj K.; Bamber, Jonathan L.; Colgan, William; van den Broeke, Michiel; Siggaard-Andersen, Marie-Louise; Nuth, Christopher; Schomacker, Anders; Andresen, Camilla S.; Willerslev, Eske; Kjær, Kurt H.

    2015-12-01

    The response of the Greenland Ice Sheet (GIS) to changes in temperature during the twentieth century remains contentious, largely owing to difficulties in estimating the spatial and temporal distribution of ice mass changes before 1992, when Greenland-wide observations first became available. The only previous estimates of change during the twentieth century are based on empirical modelling and energy balance modelling. Consequently, no observation-based estimates of the contribution from the GIS to the global-mean sea level budget before 1990 are included in the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Here we calculate spatial ice mass loss around the entire GIS from 1900 to the present using aerial imagery from the 1980s. This allows accurate high-resolution mapping of geomorphic features related to the maximum extent of the GIS during the Little Ice Age at the end of the nineteenth century. We estimate the total ice mass loss and its spatial distribution for three periods: 1900-1983 (75.1 ± 29.4 gigatonnes per year), 1983-2003 (73.8 ± 40.5 gigatonnes per year), and 2003-2010 (186.4 ± 18.9 gigatonnes per year). Furthermore, using two surface mass balance models we partition the mass balance into a term for surface mass balance (that is, total precipitation minus total sublimation minus runoff) and a dynamic term. We find that many areas currently undergoing change are identical to those that experienced considerable thinning throughout the twentieth century. We also reveal that the surface mass balance term shows a considerable decrease since 2003, whereas the dynamic term is constant over the past 110 years. Overall, our observation-based findings show that during the twentieth century the GIS contributed at least 25.0 ± 9.4 millimetres of global-mean sea level rise. Our result will help to close the twentieth-century sea level budget, which remains crucial for evaluating the reliability of models used to

  12. Phase Diagram Calculation of Gas Mixtures for Refrigeration; Reflection & Transmission Coefficients and the Effective Mass: Superconducting Proximity I-V Measurements.

    NASA Astrophysics Data System (ADS)

    Friedmann, Gideon

    The efficiency of Joule-Thomson refrigerators greatly improves with the addition of hydrocarbons to nitrogen as coolant, and is highly dependent on the mixture composition. To optimize it, we calculated the mixture phase diagram using the Peng-Robinson equation of state. A program was developed to solve numerically a set of coupled non-linear equations for the equilibrium of the vapor and liquid phases of each mixture component. The program is highly efficient, quite stable, and reliable. Gases can be easily added to the program's database. We found that the cooling efficiency of the mixtures has a sharp ridge in composition space, and explain this. To better understand tunneling spectra of the high T_{rm c} cuprate superconductors, we analyzed the one-dimensional behavior of the wavefunction of a free particle striking a crystal interface. We describe the free particle using a wavepacket of plane waves, and the crystal using the Kronig-Penney model. We find that when the wavepacket is spread over many unit cells, it behaves like a free particle wavepacket striking a small potential step. The reflection and transmission coefficients are derived and one finds that they do not contain the particle's effective mass. We determine that the boundary conditions used in a standard effective mass approach must be modified to make it work. We conclude that one should not use the effective mass approximation in treating high T_{rm c} superconductor interfaces. We measured the dynamic resistance of a superconducting -normal metal-normal metal (SNN') geometry and observed that N', a superconductor at low enough temperatures, displays superconducting properties above its critical temperature. They disappear well below the critical temperature of S. We present a simple model of the proximity effect, which is self-consistent at any temperature and good for arbitrary thicknesses of N. The model shows how the superconducting gap decays with the distance from S. We observe that the

  13. Investigating the Influence of the Added Mass Effect to Marine Hydrokinetic Horizontal-Axis Turbines Using a General Dynamic Wake Wind Turbine Code: Preprint

    SciTech Connect

    Maniaci, D. C.; Li, Y.

    2012-04-01

    This paper describes a recent study to investigate the applicability of a horizontal-axis wind turbine (HAWT) structural dynamics and unsteady aerodynamics analysis program (FAST and AeroDyn respectively) to modeling the forces on marine hydrokinetic (MHK) turbines. It summarizes the added mass model that has been added to AeroDyn. The added mass model only includes flow acceleration perpendicular to the rotor disc, and ignores added mass forces caused by blade deflection. A model of the National Renewable Energy Laboratory's (NREL) Unsteady Aerodynamics Experiment (UAE) Phase VI wind turbine was analyzed using FAST and AeroDyn with sea water conditions and the new added mass model. The results of this analysis exhibited a 3.6% change in thrust for a rapid pitch case and a slight change in amplitude and phase of thrust for a case with 30 degrees of yaw.

  14. Investigating the Influence of the Added Mass Effect to Marine Hydrokinetic Horizontal-Axis Turbines Using a General Dynamic Wake Wind Turbine Code

    SciTech Connect

    Maniaci, D. C.; Li, Y.

    2011-10-01

    This paper describes a recent study to investigate the applicability of a horizontal-axis wind turbine (HAWT) structural dynamics and unsteady aerodynamics analysis program (FAST and AeroDyn respectively) to modeling the forces on marine hydrokinetic (MHK) turbines. This paper summarizes the added mass model that has been added to AeroDyn. The added mass model only includes flow acceleration perpendicular to the rotor disc, and ignores added mass forces caused by blade deflection. A model of the National Renewable Energy Laboratory's (NREL) Unsteady Aerodynamics Experiment (UAE) Phase VI wind turbine was analyzed using FAST and AeroDyn with sea water conditions and the new added mass model. The results of this analysis exhibited a 3.6% change in thrust for a rapid pitch case and a slight change in amplitude and phase of thrust for a case with 30{sup o} of yaw.

  15. Adding value through accelerator mass spectrometry-enabled first in human studies.

    PubMed

    Seymour, Mark A

    2016-12-01

    Accelerator mass spectrometry (AMS) is an ultra-sensitive technique for the analysis of radiocarbon. It is applicable to bioanalysis of any (14) C-labelled analyte and any sample type. The increasing body of data generated using LC+AMS indicates that the methodology is robust and reliable, and capable of meeting the same validation criteria as conventional bioanalytical techniques. Because it is a tracer technique, AMS is capable of discriminating between an administered radiolabelled dose and endogenous compound or non-radiolabelled compound administered separately. This paper discusses how it can be used to enhance the design of first in human (FIH) clinical studies and generate significant additional data, including: fundamental pharmacokinetics (CL and V), absolute bioavailability, mass balance, routes and rates of excretion, metabolic fate (including first-pass metabolism, identification of biliary metabolites and quantitative data to address metabolite safety testing issues), and tissue disposition of parent compound and metabolites. Because the (14) C-labelled microtracer dose is administered at the same time as a pharmacologically relevant non-radiolabelled dose, there is no concern about dose-linearity. However the mass of the microtracer dose itself is negligible and therefore does not affect the outcome of the FIH study. The addition of microtracer doses to a FIH study typically requires little additional expense, apart from the AMS analytics, making the approach cost-effective. It can also save significant time, compared to conventional approaches, and, by providing reliable human in vivo data as early as possible, prevent unnecessary expenditure later in drug development.

  16. Optimizing Thermal-Optical Analysis for Atmospheric Black Carbon (BC): Determining the Beer-Lambert Mass Without a Fixed Mass Absorption Coefficient for BC

    NASA Astrophysics Data System (ADS)

    Conny, J. M.; Norris, G.

    2007-12-01

    In thermal-optical transmission analysis (TOT), laser light passing through a particle-laden filter is monitored while carbonaceous material is removed in several heating steps and measured by flame ionization detection. In a helium atmosphere, the laser signal is attenuated by the pyrolysis of organic carbon (OC). Later, while carbon is removed in an oxidizing atmosphere, the laser signal returns to its value prior to pyrolysis (split point), whereupon the amount of carbon equivalent to the native BC is measured. Since pyrolyzed OC may actually evolve beyond the split point, the specific absorption cross sections of pyrolyzed OC and native BC must be equivalent. Moreover, OC pyrolysis must be sufficient so that unpyrolyzed OC is not measured as BC beyond the split point. Using response surfaces models of the apparent specific absorption cross sections for pyrolyzed OC and what the instrument measures as native BC, we determined the thermal conditions for establishing the equivalence of the apparent cross sections while insuring sufficient pyrolysis of OC. In this way, we have optimized TOT for BC mass based on the Beer-Lambert Law but without the need for an absolute mass absorption coefficient (or an absolute attenuation coefficient) for BC. Optimal thermal conditions for the equivalence of the cross sections were indicated by the intersection of the response surfaces. Concurrently, optimal conditions for sufficient pyrolysis of OC were indicated by a plateau in the response surface for the BC cross section. Modeling was based on extensive analyses of PM2.5 samples collected from Atlanta, Los Angeles, and Seattle. Although this work was reviewed by EPA and approved for publication, it may not necessarily reflect official Agency policy.

  17. Syngas fermentation to biofuel: evaluation of carbon monoxide mass transfer coefficient (kLa) in different reactor configurations.

    PubMed

    Munasinghe, Pradeep Chaminda; Khanal, Samir Kumar

    2010-01-01

    Lignocellulosic biomass such as agri-residues, agri-processing by-products, and energy crops do not compete with food and feed, and is considered to be the ideal renewable feedstocks for biofuel production. Gasification of biomass produces synthesis gas (syngas), a mixture primarily consisting of CO and H(2). The produced syngas can be converted to ethanol by anaerobic microbial catalysts especially acetogenic bacteria such as various clostridia species.One of the major drawbacks associated with syngas fermentation is the mass transfer limitation of these sparingly soluble gases in the aqueous phase. One way of addressing this issue is the improvement in reactor design to achieve a higher volumetric mass transfer coefficient (k(L)a). In this study, different reactor configurations such as a column diffuser, a 20-μm bulb diffuser, gas sparger, gas sparger with mechanical mixing, air-lift reactor combined with a 20-μm bulb diffuser, air-lift reactor combined with a single gas entry point, and a submerged composite hollow fiber membrane (CHFM) module were employed to examine the k(L) a values. The k(L) a values reported in this study ranged from 0.4 to 91.08 h(-1). The highest k(L) a of 91.08 h(-1) was obtained in the air-lift reactor combined with a 20-μm bulb diffuser, whereas the reactor with the CHFM showed the lowest k(L) a of 0.4 h(-1). By considering both the k(L) a value and the statistical significance of each configuration, the air-lift reactor combined with a 20-μm bulb diffuser was found to be the ideal reactor configuration for carbon monoxide mass transfer in an aqueous phase.

  18. Quantification of surface area and intrinsic mass transfer coefficient for ultrasound-assisted dissolution process of a sparingly soluble solid dispersed in aqueous solutions.

    PubMed

    Durbha, Krishna Sandilya; Aravamudan, Kannan

    2012-05-01

    The efficacy of power ultrasound of 20 kHz in enhancing the volumetric mass transfer coefficient was investigated in this study. Breakage and dissolution of sparingly soluble benzoic acid dispersed in either water or 24% aqueous glycerol was monitored as a function of time and ultrasound power input. Particle size measurements were carried out at intermediate times during the experiment to estimate the mean particle size and surface area. Linear combination of lognormal distributions was found to fit the experimental particle size distribution data. The De Brouckere mean diameters (d(43)) obtained from the particle size distributions decreased with increase in the ultrasonic power level. Empirical correlations were developed for the evolution of surface area as a function of ultrasonic energy input per unit mass. The effect of ultrasound on the intrinsic mass transfer coefficient (k(c)) could be decoupled from the volumetric mass transfer coefficient (k(c)a) as the surface area was also estimated. Different approaches involving either constant or variable intrinsic mass transfer coefficients were employed when carrying out the delineation. Mass transfer rates were enhanced due to both higher ultrasound induced intrinsic convective mass transfer coefficient and additional surface area created from particle breakage. To delineate the effects of particle breakage from solid dissolution, experiments were also carried out under non-mass transfer conditions by pre-saturating the solvents with benzoic acid. Both the solid-liquid systems examined in the present study attained saturation concentration when the ultrasonic energy input per unit mass was approximately 60 kJ/kg, irrespective of the ultrasonic power level setting.

  19. A tale of two solutes: Dual-domain flow and the role of the mass transfer coefficient

    NASA Astrophysics Data System (ADS)

    Callaghan, M. V.; Bishop, J. M.; Cey, E. E.; Bentley, L. R.

    2011-12-01

    ' histories were different because of the difference in their distribution at the beginning of the experiment. Dual-permeability water flow and solute transport has been modeled using the HYDRUS software package. The numerical model was calibrated to both the observed salt and tracer concentrations, and, consequently, the distinct behavior of the two solutes. The numerical modeling results indicate that salt and tracer transport are sensitive to the mass transfer coefficient between matrix and macropore domains and, consequently, proper selection of the coefficient value is key to the accurate prediction of transport in dual permeability media.

  20. New consistency tests for high-accuracy measurements of X-ray mass attenuation coefficients by the X-ray extended-range technique

    SciTech Connect

    Chantler, C.T.; Islam, M.T.; Rae, N.A.; Tran, C.Q.; Glover, J.L.; Barnea, Z.

    2012-09-25

    An extension of the X-ray extended-range technique is described for measuring X-ray mass attenuation coefficients by introducing absolute measurement of a number of foils - the multiple independent foil technique. Illustrating the technique with the results of measurements for gold in the 38-50 keV energy range, it is shown that its use enables selection of the most uniform and well defined of available foils, leading to more accurate measurements; it allows one to test the consistency of independently measured absolute values of the mass attenuation coefficient with those obtained by the thickness transfer method; and it tests the linearity of the response of the counter and counting chain throughout the range of X-ray intensities encountered in a given experiment. In light of the results for gold, the strategy to be ideally employed in measuring absolute X-ray mass attenuation coefficients, X-ray absorption fine structure and related quantities is discussed.

  1. Higher Daily Energy Expenditure and Respiratory Quotient, Rather Than Fat-Free Mass, Independently Determine Greater ad Libitum Overeating

    PubMed Central

    Thearle, Marie S.; Krakoff, Jonathan; Votruba, Susanne B.

    2015-01-01

    Context: Body fat-free mass (FFM), energy expenditure (EE), and respiratory quotient (RQ) are known predictors of daily food intake. Because FFM largely determines EE, it is unclear whether body composition per se or the underlying metabolism drives dietary intake. Objective: The objective of the study was to test whether 24-hour measures of EE and RQ and their components influence ad libitum food intake independently of FFM. Design and Participants: One hundred seven healthy individuals (62 males/45 females, 84 Native Americans/23 whites; age 33 ± 8 y; body mass index 33 ± 8 kg/m2; body fat 31% ± 8%) had 24-hour measures of EE in a whole-room indirect calorimeter during energy balance, followed by 3 days of ad libitum food intake using computerized vending machine systems. Body composition was estimated by dual-energy x-ray absorptiometry. Main Outcome Measures: FFM, 24-hour EE, RQ, spontaneous physical activity, sleeping EE (sleeping metabolic rate), awake and fed thermogenesis, and ad libitum food intake (INTAKE) were measured. Results: Higher 24-hour RQ (P < .001, partial R2 = 16%) and EE (P = .01, partial R2 = 7%), but not FFM (P = .65), were independent predictors of INTAKE. Mediation analysis demonstrated that 24-hour EE is responsible for 80% of the FFM effect on INTAKE (44.5 ± 16.9 kcal ingested per kilogram of FFM, P= .01), whereas the unique effect due to solely FFM was negligible (10.6 ± 23.2, P = .65). Spontaneous physical activity (r = 0.33, P = .001), but not sleeping metabolic rate (P = .71), positively predicted INTAKE, whereas higher awake and fed thermogenesis determined greater INTAKE only in subjects with a body mass index of 29 kg/m2 or less (r = 0.44, P = .01). Conclusions: EE and RQ, rather than FFM, independently determine INTAKE, suggesting that competitive energy-sensing mechanisms driven by the preferential macronutrient oxidation and total energy demands may regulate food intake. PMID:26086330

  2. [Fast screening of 24 sedative hypnotics illegally added in improving sleep health foods by high performance liquid chromatography-ion trap mass spectrometry].

    PubMed

    Lu, Li; Gong, Xu; Tan, Li

    2015-03-01

    A fast screening method was established for the simultaneous determination of 24 sedative hypnotics illegally added in improving sleep health foods by high performance liquid chromatography-ion trap mass spectrometry (HPLC-IT MS). The method was based on the sonication assisted extraction of the improving sleep health food samples using methanol. The extract was then filtrated with 0.45 µm filter membrane and the filtrate was separated on a Phenomenex Luna C18 column with isocratic elution at a flow rate of 0.3 mL/min. A binary mobile phase was 0.05% (v/v) formic acid (solvent A)-methanol/acetonitrile (15:25, v/v, solvent B). The electrospray ionization (ESI) source in positive ion mode or negative ion mode was used to scan MS1-MS3 spectra for the 24 sedative hypnotics. The MS2 and MS3 spectra were used for qualitative analysis of samples. The calibration graphs were linear in their concentration ranges with the correlation coefficients (r2) more than 0.999. The limits of detection (LODs) were 4.0-446.6 µg/L. The recoveries for all the drugs in the improving sleep health foods were 88.6%-110.3% with the relative standard deviations no more than 9.8% at three spiked levels. Twenty-seven batches of the improving sleep health foods were tested. Melatonin was found in eighteen batches. The method is fast, specific, sensitive, easy and suitable for fast screening of 24 sedative hypnotics illegally added in improving sleep health foods.

  3. An added-mass partition algorithm for fluid–structure interactions of compressible fluids and nonlinear solids

    SciTech Connect

    Banks, J.W. Henshaw, W.D. Kapila, A.K. Schwendeman, D.W.

    2016-01-15

    We describe an added-mass partitioned (AMP) algorithm for solving fluid–structure interaction (FSI) problems involving inviscid compressible fluids interacting with nonlinear solids that undergo large rotations and displacements. The computational approach is a mixed Eulerian–Lagrangian scheme that makes use of deforming composite grids (DCG) to treat large changes in the geometry in an accurate, flexible, and robust manner. The current work extends the AMP algorithm developed in Banks et al. [1] for linearly elasticity to the case of nonlinear solids. To ensure stability for the case of light solids, the new AMP algorithm embeds an approximate solution of a nonlinear fluid–solid Riemann (FSR) problem into the interface treatment. The solution to the FSR problem is derived and shown to be of a similar form to that derived for linear solids: the state on the interface being fundamentally an impedance-weighted average of the fluid and solid states. Numerical simulations demonstrate that the AMP algorithm is stable even for light solids when added-mass effects are large. The accuracy and stability of the AMP scheme is verified by comparison to an exact solution using the method of analytical solutions and to a semi-analytical solution that is obtained for a rotating solid disk immersed in a fluid. The scheme is applied to the simulation of a planar shock impacting a light elliptical-shaped solid, and comparisons are made between solutions of the FSI problem for a neo-Hookean solid, a linearly elastic solid, and a rigid solid. The ability of the approach to handle large deformations is demonstrated for a problem of a high-speed flow past a light, thin, and flexible solid beam.

  4. Vertically-resolved profiles of mass concentrations and particle backscatter coefficients of Asian dust plumes derived from lidar observations of silicon dioxide.

    PubMed

    Noh, Youngmin; Müller, Detlef; Shin, Sung-Kyun; Shin, Dongho; Kim, Young J

    2016-01-01

    This study presents a method to retrieve vertically-resolved profiles of dust mass concentrations by analyzing Raman lidar signals of silicon dioxide (quartz) at 546nm. The observed particle plumes consisted of mixtures of East Asian dust with anthropogenic pollution. Our method for the first time allows for extracting the contribution of the aerosol component "pure dust" contained in the aerosol type "polluted dust". We also propose a method that uses OPAC (Optical Properties of Aerosols and Clouds) and the mass concentrations profiles of dust in order to derive profiles of backscatter coefficients of pure dust in mixed dust/pollution plumes. The mass concentration of silicon dioxide (quartz) in the atmosphere can be estimated from the backscatter coefficient of quartz. The mass concentration of dust is estimated by the weight percentage (38-77%) of mineral quartz in Asian dust. The retrieved dust mass concentrations are classified into water soluble, nucleation, accumulation, mineral-transported and coarse mode according to OPAC. The mass mixing ratio of 0.018, 0.033, 0.747, 0.130 and 0.072, respectively, is used. Dust extinction coefficients at 550nm were calculated by using OPAC and prescribed number concentrations for each of the 5 components. Dust backscatter coefficients were calculated from the dust extinction coefficients on the basis of a lidar ratio of 45±3sr at 532nm. We present results of quartz-Raman measurements carried out on the campus of the Gwangju Institute of Science and Technology (35.10°N, 126.53°E) on 15, 16, and 21 March 2010.

  5. Towards a quantitative, measurement-based estimate of the uncertainty in photon mass attenuation coefficients at radiation therapy energies

    NASA Astrophysics Data System (ADS)

    Ali, E. S. M.; Spencer, B.; McEwen, M. R.; Rogers, D. W. O.

    2015-02-01

    In this study, a quantitative estimate is derived for the uncertainty in the XCOM photon mass attenuation coefficients in the energy range of interest to external beam radiation therapy—i.e. 100 keV (orthovoltage) to 25 MeV—using direct comparisons of experimental data against Monte Carlo models and theoretical XCOM data. Two independent datasets are used. The first dataset is from our recent transmission measurements and the corresponding EGSnrc calculations (Ali et al 2012 Med. Phys. 39 5990-6003) for 10-30 MV photon beams from the research linac at the National Research Council Canada. The attenuators are graphite and lead, with a total of 140 data points and an experimental uncertainty of ˜0.5% (k = 1). An optimum energy-independent cross section scaling factor that minimizes the discrepancies between measurements and calculations is used to deduce cross section uncertainty. The second dataset is from the aggregate of cross section measurements in the literature for graphite and lead (49 experiments, 288 data points). The dataset is compared to the sum of the XCOM data plus the IAEA photonuclear data. Again, an optimum energy-independent cross section scaling factor is used to deduce the cross section uncertainty. Using the average result from the two datasets, the energy-independent cross section uncertainty estimate is 0.5% (68% confidence) and 0.7% (95% confidence). The potential for energy-dependent errors is discussed. Photon cross section uncertainty is shown to be smaller than the current qualitative ‘envelope of uncertainty’ of the order of 1-2%, as given by Hubbell (1999 Phys. Med. Biol 44 R1-22).

  6. Henry’s Law Constant and Overall Mass Transfer Coefficient for Formaldehyde Emission from Small Water Pools under Simulated Indoor Environmental Conditions

    EPA Science Inventory

    The Henry’s law constant (HLC) and the overall mass transfer coefficient are both important parameters for modeling formaldehyde emissions from aqueous solutions. In this work, the apparent HLCs for aqueous formaldehyde solutions were determined in the concentration range from 0....

  7. Mass movement deposit and Tsunami in Lake Geneva (Switzerland-France) caused by a rockslide in 563 AD

    NASA Astrophysics Data System (ADS)

    Kremer, K.; Simpson, G.; Girardclos, S.

    2012-04-01

    Steep continental margins are known to collapse, producing submarine landslides that can generate Tsunamis. At smaller scale, the same can happen in lake basins. Lake sediments are excellent archives of such events. The study of mass movement deposits in lake sediments allows a better knowledge of past natural hazards in intracontinental regions at historic and prehistoric timescales. In Lake Geneva (Switzerland-France), more than 100 km of high resolution seismic reflection profiles reveal two distinct sequences in the lakes' late Holocene sedimentation history. The first sequence consists mainly of a succession of five large lens-shaped seismic units (A to E), characterized by transparent/chaotic seismic facies with irregular lower boundaries, interpreted as mass-movement deposits. These units are interbedded with parallel, continuous and strong amplitude reflections, interpreted as the 'background' lake sediment. The largest and most recent unit (E) is 5 m thick, covers an area of 50 km2 and has an estimated minimum volume of 0.25 km3, making it the largest sub-lacustrine mass-movement unit in Switzerland. The second sediment sequence consists of 5 m of 'background' seismic facies with parallel geometry, varying at small scale between chaotic/transparent and continuous, high amplitude reflections, which is interpreted as alternating turbidite and hemipelagic layers, respectively. Four 10 m long sediment cores confirm the seismic interpretation and show that the 5 m thick deposit can be described as a co-genetic debrite turbidite (Talling et al., 2004). Radiocarbon dating of plant macro-remains reveals that the unit E deposit may be linked to the Tauredunum rockslide of 563 AD in Rhone delta area. The induced sediment failure in the Rhone delta triggered a tsunami wave destroying parts of the Geneva Burgudian city and other villages at the lake borders as described in historical records. Numerical simulations, based on the shallow water equations, performed here

  8. Facilitating Conceptual Understanding of Gas-Liquid Mass Transfer Coefficient through a Simple Experiment Involving Dissolution of Carbon Dioxide in Water in a Surface Aeration Reactor

    ERIC Educational Resources Information Center

    Utgikar, Vivek P.; MacPherson, David

    2016-01-01

    Students in the undergraduate "transport phenomena" courses typically have a greater difficulty in understanding the theoretical concepts underlying the mass transport phenomena as compared to the concepts of momentum and energy transport. An experiment based on dissolution of carbon dioxide in water was added to the course syllabus to…

  9. EXTENSION OF THE INVERSE ADDING-DOUBLING METHOD TO THE MEASUREMENT OF WAVELENGTH-DEPENDENT ABSORPTION AND SCATTERING COEFFICIENTS OF BIOLOGICAL SAMPLES

    SciTech Connect

    Allegood, M.S.; Baba, J.S.

    2008-01-01

    Light interaction with biological tissue can be described using three parameters: the scattering and absorption coeffi cients (μs and μa), as well as the anisotropy (g) which describes the directional dependence of the scattered photons. Accurately determining these optical properties for different tissue types at specifi c wavelengths simultaneously would be benefi cial for a variety of different biomedical applications. The goal of this project was to take a user defi ned g-value and determine the remaining two parameters for a specifi ed wavelength range. A fully automated computer program and process was developed to collect data for all wavelengths in a timely and accurate manner. LabVIEW® was used to write programs to automate raw intensity data collection from a spectrometer equipped integrating sphere, conversion of the data into a format for analysis via Scott Prahl’s Inverse Adding-Doubling (IAD) C code execution, and fi nally computation of the optical properties based on the output from the IAD code. To allow data to be passed effi ciently between LabVIEW® and C code program modules, the two were combined into a single program (OPT 3.1). OPT 3.1 was tested using tissue mimicking phantoms. Determination of the absorption and scattering coeffi cients showed excellent agreement with theory for wavelengths where the user inputted single g-value was suffi ciently precise. Future improvements entail providing for multi-wavelength g-value entry to extend the accuracy of results to encompass the complete multispectral range. Ultimately, the data collection process and algorithms developed through this effort will be used to examine actual biological tissues for the purpose of building and refi ning models for light-tissue interactions.

  10. Experimental and CFD-PBM Study of Oxygen Mass Transfer Coefficient in Different Impeller Configurations and Operational Conditions of a Two-Phase Partitioning Bioreactor.

    PubMed

    Moradkhani, Hamed; Izadkhah, Mir-Shahabeddin; Anarjan, Navideh

    2017-02-01

    In this work, gas dispersion in a two-phase partitioning bioreactor is analyzed by calculating volumetric oxygen mass transfer coefficient which is modeled using a commercial computational fluid dynamics (CFD), code FLUENT 6.2. Dispersed oxygen bubbles dynamics is based on standard "k-ε" Reynolds-averaged Navier-Stokes (RANS) model. This paper describes a three-dimensional CFD model coupled with population balance equations (PBE) in order to get more confirming results of experimental measurements. Values of k L a are obtained using dynamic gassing-out method. Using the CFD simulation, the volumetric mass transfer coefficient is calculated based on Higbie's penetration theory. Characteristics of mass transfer coefficient are investigated for five configurations of impeller and three different aeration flow rates. The pitched six blade type, due to the creation of downward flow direction, leads to higher dissolved oxygen (DO) concentrations, thereby, higher values of k L a compared with other impeller compositions. The magnitude of dissolved oxygen percentage in the aqueous phase has direct correlation with impeller speed and any increase of the aeration magnitude leads to faster saturation in shorter periods of time. Agitation speeds of 300 to 800 rpm are found to be the most effective rotational speeds for the mass transfer of oxygen in two-phase partitioning bioreactors (TPPB).

  11. Particle motion in a periodic driving flow. The role of added mass force and the finite size of particles

    NASA Astrophysics Data System (ADS)

    Ruiz Chavarria, Gerardo; Lopez Sanchez, Erick Javier

    2016-11-01

    The motion of particles in a fluid is an open problem. The main difficulty arises from the fact that hydrodynamical forces acting on a particle depend on the flow properties. In addition, the form and the size of particles must be taken into account. In this work we present numerical results of the particle transport in a periodic driving flow in a channel flushing into an open domain. To study the transport of particles we solve the equation of motion for a spherical particle in which we include the drag, the gravity, the buoyancy, the added mass and the history force. Additionally we include the corrections for a particle of finite size. For solving this equation a knowledge of the velocity field is required. To obtain the velocity field we solve the Navier Stokes and the continuity equations with a finite volume method. In the flow under study a vorticity dipole and a spanwise vortex are present, both have an important influence on the motion of particles. The dipole enhances displacement of particles because flow between vortices behaves like a jet and the spanwise vortex produces the lifting and deposition of particles from/to the bottom. We observe clustering of particles both into the channel and in the open domain as observed in coastal systems. The authors acknowledge DGAPA-UNAM by support under project PAPIIT IN115315 "Ondas y estructuras coherentes en dinámica de fluidos".

  12. Self-association of nicotinamide in aqueous solution: mass transport, freezing-point depression, and partition coefficient studies.

    PubMed

    Charman, W N; Lai, C S; Finnin, B C; Reed, B L

    1991-09-01

    The steady-state flux (SSF) of nicotinamide from an aqueous donor phase across a model Silastic membrane did not increase proportionally with increasing donor phase concentration. The suspected self-association of the drug in aqueous solution was evaluated by studying the concentration-dependent changes in (i) the molal osmotic coefficient of nicotinamide (freezing-point depression studies) and (ii) the partition coefficient between water and n-octanol. The freezing points of aqueous solutions of nicotinamide were measured and a plot of osmolality vs molality was nonlinear. The partition coefficient of nicotinamide, studied at 15, 25, and 32 degrees C, also decreased with increasing concentration of drug. Mathematical models describing dimerization and higher orders of association were applied to the data. The results indicated the involvement of higher orders of association and it was found that an isodesmic (step-association) model was an adequate description of the freezing-point depression and partition coefficient data. The association constant, K, ranged between 1.59 +/- 0.02 M-1 at the freezing point and 0.48 +/- 0.01 M-1 as estimated from the partition coefficient data at 32 degrees C. These models for the self-association of nicotinamide allowed estimation of the apparent concentration of "monomeric" nicotinamide in the donor phase solutions studied in the SSF experiments. When the SSF data were analyzed with regard to the concentration of monomeric nicotinamide in the donor phase, a relationship close to linearity was observed.

  13. Measurement of the x-ray mass attenuation coefficients of gold in the 38-50-keV energy range

    SciTech Connect

    Islam, M T; Rae, N A; Glover, J L; Barnea, Z; de Jonge, M D; Tran, C Q; Wang, J; Chantler, C T

    2010-11-12

    We used synchrotron x rays to measure the x-ray mass attenuation coefficients of gold at nine energies from 38 to 50 keV with accuracies of 0.1%. Our results are much more accurate than previous measurements in this energy range. A comparison of our measurements with calculated mass attenuation coefficients shows that our measurements fall almost exactly midway between the XCOM and FFAST calculated theoretical values, which differ from one another in this energy region by about 4%, even though the range includes no absorption edge. The consistency and accuracy of these measurements open the way to investigations of the x-ray attenuation in the region of the L absorption edge of gold.

  14. Application of the shock layer theory to the determination of the mass transfer rate coefficient and its concentration dependence for proteins on anion exchange columns

    SciTech Connect

    Sajonz, P. ||; Guan-Sajonz, H.; Zhong, G.; Guiochon, G. |

    1997-03-01

    The extension of the shock layer theory to systems having a slow mass transfer kinetics and a concentration-dependent rate coefficient is discussed. Experiments were carried out with bovine serum albumin on two anion exchanges, TSK-GEL-DEAE-5PW and Resource-Q. The adsorption isotherm data, determined by single-step frontal analysis, could be fitted to simplified bi-Langmuir equations with vary small residuals. A lumped kinetic model (solid film linear driving force model, with rate coefficient k{sub f}) was used to account for the mass transfer kinetics. The profile of each breakthrough curve (BC) was fitted to the curve calculated with this transport model and the rate coefficient k{sub f} obtained by identification. A linear dependence of k{sub f} on the average concentration of the step of the BC was found. The shock layer thicknesses (SLT) calculated for different relative concentrations agreed very well with the experimental results. This justifies the use of the SLT for the direct determination of rate coefficients. 19 refs., 9 figs., 2 tabs.

  15. Comparison of approaches for measuring the mass accommodation coefficient for the condensation of water and sensitivities to uncertainties in thermophysical properties.

    PubMed

    Miles, Rachael E H; Reid, Jonathan P; Riipinen, Ilona

    2012-11-08

    We compare and contrast measurements of the mass accommodation coefficient of water on a water surface made using ensemble and single particle techniques under conditions of supersaturation and subsaturation, respectively. In particular, we consider measurements made using an expansion chamber, a continuous flow streamwise thermal gradient cloud condensation nuclei chamber, the Leipzig Aerosol Cloud Interaction Simulator, aerosol optical tweezers, and electrodynamic balances. Although this assessment is not intended to be comprehensive, these five techniques are complementary in their approach and give values that span the range from near 0.1 to 1.0 for the mass accommodation coefficient. We use the same semianalytical treatment to assess the sensitivities of the measurements made by the various techniques to thermophysical quantities (diffusion constants, thermal conductivities, saturation pressure of water, latent heat, and solution density) and experimental parameters (saturation value and temperature). This represents the first effort to assess and compare measurements made by different techniques to attempt to reduce the uncertainty in the value of the mass accommodation coefficient. Broadly, we show that the measurements are consistent within the uncertainties inherent to the thermophysical and experimental parameters and that the value of the mass accommodation coefficient should be considered to be larger than 0.5. Accurate control and measurement of the saturation ratio is shown to be critical for a successful investigation of the surface transport kinetics during condensation/evaporation. This invariably requires accurate knowledge of the partial pressure of water, the system temperature, the droplet curvature and the saturation pressure of water. Further, the importance of including and quantifying the transport of heat in interpreting droplet measurements is highlighted; the particular issues associated with interpreting measurements of condensation

  16. Measurement of mass attenuation coefficients of Eremurus-Rhizophora spp. particleboards for X-ray in the 16.63-25.30 keV energy range

    NASA Astrophysics Data System (ADS)

    Tousi, E. T.; Bauk, S.; Hashim, R.; Jaafar, M. S.; Abuarra, A.; Aldroobi, K. S. A.; Al-Jarrah, A. M.

    2014-10-01

    The roots of Eremurus spp. were used as a bio-adhesive in the fabrication of Rhizophora spp. particleboards. The mass attenuation coefficients of Eremurus-Rhizophora spp. particleboard of six samples with two different weight percentages of the Eremurus spp. root (6% and 12%) and three various Rhizophora spp. particle sizes (≤149 μm, 149-500 μm and 500-1000 μm) were determined by using X-ray fluorescence (XRF) photons in 16.63 keV and 25.30 keV of the photon energy range. The results were compared with theoretically calculated mass attenuations using the XCOM computer program for younger-age (breast 1: 75% muscle+25% fat), middle-age (breast 2: 50% muscle+50% fat), and old-age (breast 3: 25% muscle+75% fat) breasts. The results indicated that Eremurus-Rhizophora spp. particleboard is the appropriate suitable phantom in the diagnostic energy region. The mass attenuation coefficient in the low weight percentage of the bio-adhesive and the large Rhizophora spp. particle size were found very close to breast 1. Moreover the mass attenuation coefficient of the sample with high weight percentage of the bio-adhesive and small Rhizophora spp. particle size was found very close to water as a standard material phantom. In addition, the viscosity of dissolved Eremurus spp. root in water could be considerably higher than that of formaldehyde-based adhesives, which affects on some properties such as high strength and high binding.

  17. Measurement of the mass energy-absorption coefficient of air for x-rays in the range from 3 to 60 keV.

    PubMed

    Buhr, H; Büermann, L; Gerlach, M; Krumrey, M; Rabus, H

    2012-12-21

    For the first time the absolute photon mass energy-absorption coefficient of air in the energy range of 10 to 60 keV has been measured with relative standard uncertainties below 1%, considerably smaller than those of up to 2% assumed for calculated data. For monochromatized synchrotron radiation from the electron storage ring BESSY II both the radiant power and the fraction of power deposited in dry air were measured using a cryogenic electrical substitution radiometer and a free air ionization chamber, respectively. The measured absorption coefficients were compared with state-of-the art calculations and showed an average deviation of 2% from calculations by Seltzer. However, they agree within 1% with data calculated earlier by Hubbell. In the course of this work, an improvement of the data analysis of a previous experimental determination of the mass energy-absorption coefficient of air in the range of 3 to 10 keV was found to be possible and corrected values of this preceding study are given.

  18. Soil Exchangeable Phosphorus Pools, Equilibrium Characteristics, and Mass Distribution Coefficients for Eight-Mile Run Watershed, Wisconsin

    DTIC Science & Technology

    2009-09-01

    and Fe hydroxides) until an approximate equilibrium is achieved between particulate and aqueous phases as: 2dC  (2) where Cp2 = the soil...adsorbed inorganic P pool (M·M-1; Barrow 1983; Van Riemsdijk et al. 1984). In general, Cp2 represents a small fraction of the total adsorbed inorganic P...3) where ρ = the soil density (M·L-3). Cd2 and Cp2 are related to an equilibrium partition coefficient as: 2 2p dC k C  (4) where kd2 = the

  19. Kinetic study of the concentration dependence of the mass transfer rate coefficient in anion-exchange chromatography of bovine serum albumin

    SciTech Connect

    Miyabe, Kanji; Guiochon, G. |

    1999-07-01

    The experimental results of a previous study of the mass transfer kinetics of bovine serum albumin (BSA) in ion-exchange chromatography under nonlinear conditions are reevaluated. The analysis of the concentration dependence of the lumped mass-transfer rate coefficient (k{sub m,L}) provides information on the kinetics of axial dispersion, fluid-to-particle mass transfer, intraparticle mass transfer, and adsorption/desorption. The new analysis shows that the contribution of intraparticle mass transfer is the dominant one. Similar to k{sub m,L}, the surface diffusivity (D{sub s}) of BSA increases with increasing concentration. The linear concentration dependence of k{sub m,L} seems to originate in a similar dependence of D{sub s}. The use of a heterogeneous-surface model for the anion-exchange resin provides an explanation of the positive concentration dependence of D{sub s}. This work illustrates how frontal analysis data can be used for a detailed investigation of the kinetics of mass transfer between the phases of a chromatographic column, in addition to its conventional use in the determination of the thermodynamic characteristics of the phase equilibrium.

  20. Charge carrier effective mass and concentration derived from combination of Seebeck coefficient and 125Te NMR measurements in complex tellurides

    NASA Astrophysics Data System (ADS)

    Levin, E. M.

    2016-06-01

    Thermoelectric materials utilize the Seebeck effect to convert heat to electrical energy. The Seebeck coefficient (thermopower), S , depends on the free (mobile) carrier concentration, n , and effective mass, m*, as S ˜m*/n2 /3 . The carrier concentration in tellurides can be derived from 125Te nuclear magnetic resonance (NMR) spin-lattice relaxation measurements. The NMR spin-lattice relaxation rate, 1 /T1 , depends on both n and m* as 1 /T1˜(m*)3/2n (within classical Maxwell-Boltzmann statistics) or as 1 /T1˜(m*)2n2 /3 (within quantum Fermi-Dirac statistics), which challenges the correct determination of the carrier concentration in some materials by NMR. Here it is shown that the combination of the Seebeck coefficient and 125Te NMR spin-lattice relaxation measurements in complex tellurides provides a unique opportunity to derive the carrier effective mass and then to calculate the carrier concentration. This approach was used to study A gxS bxG e50-2xT e50 , well-known GeTe-based high-efficiency tellurium-antimony-germanium-silver thermoelectric materials, where the replacement of Ge by [Ag+Sb] results in significant enhancement of the Seebeck coefficient. Values of both m* and n derived using this combination show that the enhancement of thermopower can be attributed primarily to an increase of the carrier effective mass and partially to a decrease of the carrier concentration when the [Ag+Sb] content increases.

  1. Measurement of the mass attenuation coefficient from 81 keV to 1333 keV for elemental materials Al, Cu and Pb

    NASA Astrophysics Data System (ADS)

    Gjorgieva, Slavica; Barandovski, Lambe

    2016-03-01

    The mass attenuation coefficients (μ/ρ) for 3 high purity elemental materials Al, Cu and Pb were measured in the γ-ray energy range from 81 keV up to 1333 keV using 22Na, 60Co 133Ba and 133Cs as sources of gamma radiation. Well shielded detector (NaI (Tl) semiconductor detector) was used to measure the intensity of the transmitted beam. The measurements were made under condition of good geometry, assuring that any photon absorbed or deflected appreciably does not reach the detector. The measured values are compared with the theoretical ones obtained by Seltzer (1993).

  2. Mass attenuation coefficient of the Earth, Moon and Mars samples over 1keV-100GeV energy range.

    PubMed

    Camargo Moreira, Anderson; Roberto Appoloni, Carlos

    2006-09-01

    This work presents the calculation of the mass attenuation coefficient (micro) of lunar, Martian and terrestrial samples in function of the energy. WinXCOM software was employed to determine the micro values for the samples in the range from 1 keV to 100 GeV. The obtained values were practically the same for energies larger than 100 keV, but marked differences among the samples were observed for energies below 25 keV, which is the energy range of interest for the XRF system used in space probes.

  3. Estimation of air-water gas exchange coefficient in a shallow lagoon based on 222Rn mass balance.

    PubMed

    Cockenpot, S; Claude, C; Radakovitch, O

    2015-05-01

    The radon-222 mass balance is now commonly used to quantify water fluxes due to Submarine Groundwater Discharge (SGD) in coastal areas. One of the main loss terms of this mass balance, the radon evasion to the atmosphere, is based on empirical equations. This term is generally estimated using one among the many empirical equations describing the gas transfer velocity as a function of wind speed that have been proposed in the literature. These equations were, however, mainly obtained from areas of deep water and may be less appropriate for shallow areas. Here, we calculate the radon mass balance for a windy shallow coastal lagoon (mean depth of 6m and surface area of 1.55*10(8) m(2)) and use these data to estimate the radon loss to the atmosphere and the corresponding gas transfer velocity. We present new equations, adapted to our shallow water body, to express the gas transfer velocity as a function of wind speed at 10 m height (wind range from 2 to 12.5 m/s). When compared with those from the literature, these equations fit particularly well with the one of Kremer et al. (2003). Finally, we emphasize that some gas transfer exchange may always occur, even for conditions without wind.

  4. Experimental evidence supporting the insensitivity of cloud droplet formation to the mass accommodation coefficient for condensation of water vapor to liquid water

    NASA Astrophysics Data System (ADS)

    Langridge, Justin M.; Richardson, Mathews S.; Lack, Daniel A.; Murphy, Daniel M.

    2016-06-01

    The mass accommodation coefficient for uptake of water vapor to liquid water, αM, has been constrained using photoacoustic measurements of aqueous absorbing aerosol. Measurements performed over a range of relative humidities and pressures were compared to detailed model calculations treating coupled heat and mass transfer occurring during photoacoustic laser heating cycles. The strengths and weaknesses of this technique are very different to those for droplet growth/evaporation experiments that have typically been applied to these measurements, making this a useful complement to existing studies. Our measurements provide robust evidence that αM is greater than 0.1 for all humidities tested and greater than 0.3 for data obtained at relative humidities greater than 88% where the aerosol surface was most like pure water. These values of αM are above the threshold at which kinetic limitations are expected to impact the activation and growth of aerosol particles in warm cloud formation.

  5. Improving Biomethane Production and Mass Bioconversion of Corn Stover Anaerobic Digestion by Adding NaOH Pretreatment and Trace Elements

    PubMed Central

    Liu, ChunMei; Yuan, HaiRong; Zou, DeXun; Liu, YanPing; Zhu, BaoNing; Li, XiuJin

    2015-01-01

    This research applied sodium hydroxide (NaOH) pretreatment and trace elements to improve biomethane production when using corn stover for anaerobic digestion. Full-factor experimental tests identified the best combination of trace elements with the NaOH pretreatment, indicating that the best combination was with 1.0, 0.4, and 0.4 mg·L−1·d−1 of elements Fe, Co, and Ni, respectively. The cumulative biomethane production adding NaOH pretreatment and trace elements was 11,367 mL; total solid bioconversion rate was 55.7%, which was 41.8%–62.2% higher than with NaOH-pretreatment alone and 22.2%–56.3% higher than with untreated corn stover. The best combination was obtained 5–9 days shorter than T90 and maintained good system operation stability. Only a fraction of the trace elements in the best combination was present in the resulting solution; more than 85% of the total amounts added were transferred into the solid fraction. Adding 0.897 g of Fe, 0.389 g of Co, and 0.349 g of Ni satisfied anaerobic digestion needs and enhanced biological activity at the beginning of the operation. The results showed that NaOH pretreatment and adding trace elements improve corn stover biodegradability and enhance biomethane production. PMID:26137469

  6. Warped AdS3 black holes

    NASA Astrophysics Data System (ADS)

    Anninos, Dionysios; Li, Wei; Padi, Megha; Song, Wei; Strominger, Andrew

    2009-03-01

    Three dimensional topologically massive gravity (TMG) with a negative cosmological constant -l-2 and positive Newton constant G admits an AdS3 vacuum solution for any value of the graviton mass μ. These are all known to be perturbatively unstable except at the recently explored chiral point μl = 1. However we show herein that for every value of μl ≠ 3 there are two other (potentially stable) vacuum solutions given by SL(2,Bbb R) × U(1)-invariant warped AdS3 geometries, with a timelike or spacelike U(1) isometry. Critical behavior occurs at μl = 3, where the warping transitions from a stretching to a squashing, and there are a pair of warped solutions with a null U(1) isometry. For μl > 3, there are known warped black hole solutions which are asymptotic to warped AdS3. We show that these black holes are discrete quotients of warped AdS3 just as BTZ black holes are discrete quotients of ordinary AdS3. Moreover new solutions of this type, relevant to any theory with warped AdS3 solutions, are exhibited. Finally we note that the black hole thermodynamics is consistent with the hypothesis that, for μl > 3, the warped AdS3 ground state of TMG is holographically dual to a 2D boundary CFT with central charges c_R-formula and c_L-formula.

  7. Warped AdS3 black holes

    NASA Astrophysics Data System (ADS)

    Song, Wei; Anninos, Dionysios; Li, Wei; Padi, Megha; Strominger, Andrew

    2009-03-01

    Three dimensional topologically massive gravity (TMG) with a negative cosmological constant -ell-2 and positive Newton constant G admits an AdS3 vacuum solution for any value of the graviton mass μ. These are all known to be perturbatively unstable except at the recently explored chiral point μell = 1. However we show herein that for every value of μell ≠ 3 there are two other (potentially stable) vacuum solutions given by SL(2,Bbb R) × U(1)-invariant warped AdS3 geometries, with a timelike or spacelike U(1) isometry. Critical behavior occurs at μell = 3, where the warping transitions from a stretching to a squashing, and there are a pair of warped solutions with a null U(1) isometry. For μell > 3, there are known warped black hole solutions which are asymptotic to warped AdS3. We show that these black holes are discrete quotients of warped AdS3 just as BTZ black holes are discrete quotients of ordinary AdS3. Moreover new solutions of this type, relevant to any theory with warped AdS3 solutions, are exhibited. Finally we note that the black hole thermodynamics is consistent with the hypothesis that, for μell > 3, the warped AdS3 ground state of TMG is holographically dual to a 2D boundary CFT with central charges c_R-formula and c_L-formula.

  8. Mass-specific optical absorption coefficients and imaginary part of the complex refractive indices of mineral dust components measured by a multi-wavelength photoacoustic spectrometer

    NASA Astrophysics Data System (ADS)

    Utry, N.; Ajtai, T.; Pintér, M.; Tombácz, E.; Illés, E.; Bozóki, Z.; Szabó, G.

    2015-01-01

    Mass-specific optical absorption coefficients (MACs) and the imaginary part (κ) of the refractive indices of various mineral dust components including silicate clays (illite, kaolin and bentonite), oxides (quartz, hematite and rutile), and carbonate (limestone) were determined at the wavelengths of 1064, 532, 355 and 266 nm. The MAC values were calculated from aerosol optical absorption coefficients measured by a multi-wavelength photoacoustic (PA) instrument, the mass concentration and the number size distribution of the generated aerosol samples as well as the size transfer functions of the measuring instruments. Values of κ were calculated from the measured and particle-loss-corrected data by using a Mie-theory-based retrieval algorithm. The determined values could be used for comparisons with calculated wavelength-dependent κ values typically deduced from bulk-phase measurements by using indirect measurement methods. Accordingly, the presented comparison of the measured and calculated aerosol optical absorption spectra revealed the strong need for standardized sample preparation and measurement methodology in case of bulk-phase measurements.

  9. Coupling coefficient, temperature stability and mass sensitivity of the Rayleigh-type mode on (001) [110] AlAs/GaAs

    NASA Astrophysics Data System (ADS)

    Jungnickel, F.; Chilla, E.; Makarov, S.; Fröhlich, H.-J.

    1997-12-01

    The use of AlAs/GaAs layered structures for SAW sensor applications is discussed with the aim of exploring the potential of the material system for the integration of SAW and electronic devices. Based on the acoustic wave spectrum on the (001) cut of GaAs the development of the Rayleigh-type mode in the [110] direction of the AlAs/GaAs structure is described. Using a transfer matrix algorithm the phase velocity and the coupling coefficient of the dispersive structure are calculated as a function of the relative layer thickness 0964-1726/6/6/009/img7, with k being the wave number and 0964-1726/6/6/009/img8 the layer thickness. Results of SAW phase velocity measurements carried out by a thermoelastic laser excitation method and a time delay technique are presented. The coupling coefficient has a maximum at kh = 1.8 being twice as high as the coefficient of bare GaAs. The temperature stabilization with 0964-1726/6/6/009/img9 and Au layers is calculated and the relation between 0964-1726/6/6/009/img10 and 0964-1726/6/6/009/img11 is determined for a vanishing temperature coefficient of delay (TCD). The mass sensitivity is increased by the application of the temperature stabilizing layers. It reaches a maximum value at 0964-1726/6/6/009/img12 and 0964-1726/6/6/009/img13. Some aspects of optimization procedures including the AlAs layer thickness are discussed.

  10. Maintained total body water content and serum sodium concentrations despite body mass loss in female ultra-runners drinking ad libitum during a 100 km race.

    PubMed

    Knechtle, Beat; Senn, Oliver; Imoberdorf, Reinhard; Joleska, Irena; Wirth, Andrea; Knechtle, Patrizia; Rosemann, Thomas

    2010-01-01

    We investigated in 11 female ultra-runners during a 100 km ultra-run, the association between fluid intake and prevalence of exercise-associated hyponatremia in a cross-sectional study. Athletes drank ad libitum and recorded their fluid intake. They competed at 8.0 (1.0) km/h and finished within 762 (91) min. Fluid intake was 4.1 (1.3) L during the race, equal to 0.3 (0.1) L/h. Body mass decreased by 1.5 kg (p< 0.01); pre race body mass was related to speed in the race (r = -0.78, p< 0.05); and change (Delta) in body mass was not associated with speed in the race. Change in body mass was positively (r = 0.70; p< 0.05), and Delta urinary specific gravity negatively (r = -0.67; p< 0.05), correlated to Delta percent total body water. Changes in body mass were not related to fluid intake during the race. Fluid intake was not correlated to running speed and showed no association with either Delta percent total body water nor Delta [Na] in plasma. Fluid intake showed no relationship with both Delta haematocrit and Delta plasma volume. No exercise-associated hyponatremia occurred. Female ultra- runners consuming fluids ad libitum during the race experienced no fluid overload, and ad libitum drinking protects against exercise-associated hyponatremia. The reported higher incidence of exercise-associated hyponatremia in women is not really a gender effect but due to women being more prone to overdrink.

  11. Transport coefficients of hard-sphere mixtures. III. Diameter ratio 0.4 and mass ratio 0.03 at high fluid density

    NASA Astrophysics Data System (ADS)

    Erpenbeck, Jerome J.

    1993-07-01

    The equation of state and the transport coefficients of shear viscosity, thermal conductivity, thermal diffusion, and mutal diffusion are estimated for a binary, equimolar mixture of hard spheres having a diameter ratio of 0.4 and a mass ratio of 0.03 at volumes in the range 1.7V0 to 3V0 (V0=1/2 √2 Ntsumaxaσ3a, where xa are the mole fractions, σa are the diameters, and N is the number of particles), complementing and, in some cases, improving earlier low-density results through Monte Carlo, molecular-dynamics calculations using the Green-Kubo formulas. Calculations are reported for 108 to 2048 particles, so that both finite-system and, in the case of the transport coefficients, long-time tail corrections can be applied to obtain accurate estimates of the pressure and the transport coefficients in the thermodynamic limit. Corrections of both types are found to be increasingly important at higher densities, for which the pressure is observed to become nonlinear in 1/N over the range covered. The Mansoori-Carnahan-Starling-Leland (MCSL) equation is found to account for the pressure with considerable accuracy for V>=1.7V0 the difference between the observed (infinite-system) pressure and the MCSL prediction increases monotonically with density, reaching 0.4% at V=1.7V0. For volumes below 2V0 the pressure in excess of the MCSL prediction is found to ``soften'' slightly in its dependence on the density. The pressure is also compared with the known virial series (B2 and B3) and the difference is fitted to a rational polynomial from which estimates for B4 and B5 are derived. The transport coefficients are compared with the predictions of the revised Enskog theory, evaluated using the MCSL equation of state. The shear viscosity coefficient is found to lie within about 5% of the theory over much of the range of densities, exceeding the Enskog prediction at both high and low densities and rising sharply at the highest densities. The thermal conductivity drops to about 94

  12. New insights in the velocity dependency of the external mass transfer coefficient in 2D and 3D porous media for liquid chromatography.

    PubMed

    Deridder, Sander; Desmet, Gert

    2012-03-02

    Numerical calculations of the mobile zone mass transfer rate in a variety of ordered 2D and 3D structures are presented. These calculations are in line with earlier theoretical and experimental findings made in the field of chemical engineering and suggest that the Sherwood-number (Sh(m)) appearing in the mobile phase mass transfer term of the general plate height expression of liquid chromatography is not correctly predicted by the Wilson-Geankoplis--or the Kataoka--or the penetration model expression that have been used up to now to in the field of LC, and that at least more research is needed before these expressions can be continued to be used with confidence. The aforementioned expressions were obtained by neglecting the effect of axial dispersion on the mass transfer process, and it seems that they therefore underestimate the true Sh(m)-number by a factor of 2-5 around the minimum of the van Deemter-curve. New correlations describing the variation of the Sh(m)-coefficient as a function of the reduced velocity for a number of other packing geometries (tetrahedral monolith, 2D pillar array) are proposed. These correlations are in agreement with earlier theoretical and experimental studies showing that at low velocities the local-driving force-based Sh(m)-value is of the order of 10-20 in a packed bed column with an external porosity on the order of 35-40%.

  13. Accurate prediction of H3O+ and D3O+ sensitivity coefficients to probe a variable proton-to-electron mass ratio

    NASA Astrophysics Data System (ADS)

    Owens, A.; Yurchenko, S. N.; Polyansky, O. L.; Ovsyannikov, R. I.; Thiel, W.; Špirko, V.

    2015-12-01

    The mass sensitivity of the vibration-rotation-inversion transitions of H316O+, H318O+, and D316O+ is investigated variationally using the nuclear motion program TROVE (Yurchenko, Thiel & Jensen). The calculations utilize new high-level ab initio potential energy and dipole moment surfaces. Along with the mass dependence, frequency data and Einstein A coefficients are computed for all transitions probed. Particular attention is paid to the Δ|k| = 3 and Δ|k - l| = 3 transitions comprising the accidentally coinciding |J, K = 0, v2 = 0+> and |J, K = 3, v2 = 0-> rotation-inversion energy levels. The newly computed probes exhibit sensitivities comparable to their ammonia and methanol counterparts, thus demonstrating their potential for testing the cosmological stability of the proton-to-electron mass ratio. The theoretical TROVE results are in close agreement with sensitivities obtained using the non-rigid and rigid inverter approximate models, confirming that the ab initio theory used in the present study is adequate.

  14. Liquid chromatography-mass spectrometry based metabolomics study of cloned versus normal pigs fed either restricted or ad libitum high-energy diets.

    PubMed

    Christensen, Kirstine L; Hedemann, Mette S; Jørgensen, Henry; Stagsted, Jan; Knudsen, Knud Erik B

    2012-07-06

    Genetically identical cloned pigs should in principle eliminate biological variation and provide more pronounced effects when subjected to, e.g., dietary interventions, but little is known about how phenotype and phenotypic variation is affected by cloning. Therefore, an investigation of the metabolome of cloned pigs compared to normal control pigs was performed to elucidate the variation and possible differences in the metabolic phenotypes during a dietary intervention. A total of 19 control pigs and 17 cloned pigs were given the same high-energy dense diet either ad libitum or in a restricted manner (60% of ad libitum) for ∼6 months, and plasma was subjected to liquid chromatography-mass spectrometry nontargeted metabolomics and biochemical analyses. Low systemic levels of IGF-1 could indicate altered growth conditions and energy metabolism in cloned pigs. In response to ad libitum feeding, clones had a decreased energy intake and lower weight gain compared to controls, and plasma lipid profiles were changed accordingly. Elevated lactate and decreased creatine levels implied an increased anaerobic metabolism in ad libitum fed clones. Less interindividual variation between cloned pigs was however not established, suggesting a strong role for epigenetics and/or the gut microbiota to develop variation.

  15. Study of the effect of perturber mass on collisional broadening coefficients of lines in the ν3 band of CS2

    NASA Astrophysics Data System (ADS)

    Kongolo Tshikala, Pardaillan; Blanquet, Ghislain; Lepère, Muriel

    2012-05-01

    Using a tunable diode-laser spectrometer, we have recorded 28 lines in the fundamental ν3 band of carbon disulfide diluted in several rare gases: helium, neon and krypton. These lines are ranged from P(78) to R(72) and located in the spectral range 1514-1548 cm-1. The collisional half-widths of each line have been obtained by fitting to the experimental lineshape, a Voigt profile and also the models developed by Rautian and Sobel'man and by Galatry. These two more elaborate profiles take into account the narrowing due to the molecular confinement (Dicke effect). From these results and those previously obtained for CS2 + Ar, we have compared the collisional broadening coefficients of CS2 lines to put in evidence the effect of the perturber mass.

  16. Dynamics of Pb(II) adsorption on nanostructured γ-alumina: calculations of axial dispersion and overall mass transfer coefficients in the fixed-bed column.

    PubMed

    Saadi, Zahra; Saadi, Reyhaneh; Fazaeli, Reza

    2015-09-01

    In the present study, the removal of metal ions Pb(II) using nanostructured γ-alumina was investigated by tests on batch operations and fixed-bed columns. Optimization was determined for factors effective on adsorption such as pH, contact time of metal solution with adsorbent and initial solution concentration. The optimum pH level was determined at 4.5 and the maximum adsorption percentage was achieved at 150 minutes. pHpzc was measured 8.3 for nanostructured γ-Al2O3. The Langmuir, Freundlich and Temkin isotherms were used to analyze the experimental data. The Langmuir isotherm model showed the best agreement with the experimental data. The model showed evaluations for maximum adsorption capacity of adsorbent at 119.04 mg/g and adsorbent bed performance for different flow rates, bed heights and influent concentrations were also investigated. The lumped method was used to solve the bed equations, to predict the breakthrough curve and model overall mass transfer coefficient (Koverall) and axial dispersion coefficient (Dz) parameters to make comparisons with experimental results.

  17. Measurement of the x-ray mass energy-absorption coefficient of air using 3 keV to 10 keV synchrotron radiation.

    PubMed

    Büermann, L; Grosswendt, B; Kramer, H-M; Selbach, H-J; Gerlach, M; Hoffmann, M; Krumrey, M

    2006-10-21

    For the first time absolute photon mass energy-absorption coefficients of air in the energy range 3 keV to 10 keV have been measured with relative standard uncertainties less than 1%, significantly smaller than those of up to 5% assumed hitherto for calculated data. Monochromatized synchrotron radiation was used to measure both the total radiant energy by means of silicon photodiodes calibrated against a cryogenic radiometer and the fraction of radiant energy that is deposited in dry air by means of a free air ionization chamber. The measured ionization charge was converted into energy absorbed in air by calculated effective W values of photons as a function of their energy based on new measurements of the W values in dry air for electron kinetic energies between 1 keV and 7 keV, also presented in this work. The measured absorption coefficients were compared with state-of-the art calculations and found to agree within 0.7% with data calculated earlier by Hubbell at energies above 4 keV but were found to differ by values up to 2.1% at 10 keV from more recent calculations of Seltzer.

  18. Mass relocation through soil exhaustion: Transformation of habitation patterns in the southern Netherlands (1000 BC-500 AD)

    NASA Astrophysics Data System (ADS)

    Kluiving, Sjoerd; Bekkema, Marijke; Roymans, Nico; van Mourik, Jan

    2015-04-01

    Long-term archaeological data gathering in the southern Netherlands may deliver an unprecedented regional comparison that could be exemplary for the Pleistocene sand areas of the Northwest European Plain. On a micro-scale level, it has become clear that Bronze Age (2000-800 BC) and Iron Age (800-12 BC) farmers intensively used the landscape, resulting in a relatively dense distribution pattern of settlements all over the ridges and planes of the cover sand landscape. However, this agricultural use of the landscape related to the "celtic field" system led to a process of soil degradation by increased acidification during which Umbric Podzols gradually transformed into Carbic Podzols that could no longer be used as farmland. According to established "models," this process of "secondary podzolization" particularly affected those sections of the landscape that were dominated by dry sandy soils with a low loam content (loam = clay and silt, between c. 10% and 20%). In the Late Iron Age (250-12 BC), the changing soil conditions resulted in a dramatic shift in the habitation pattern that clearly manifests itself in the Roman period (12 BC-410 AD); on the local scale, the habitation moved from the degenerated soils to nearby areas with better soil conditions (higher loam content), which became more densely inhabited now than in the Bronze Age/Early Iron Age (2000-500 BC). The introduction of new land management (in the later Iron Age, and also by Romans) could also have been important for soil degradation. The areas where the Roman period settlements concentrated became also the areas where we can find the early medieval habitation (447-751 AD) and where the Plaggic Anthrosols started to develop in the late medieval period (1270-1500 AD). This poster is based on the analysis of soil properties. Measured loam values of soil samples (n=181) in Veldhoven, southern Netherlands, are in agreement with the described model that the plaggen cover is located on soils containing high

  19. Progressing towards more quantitative analytical pyrolysis of soil organic matter using molecular beam mass spectroscopy of whole soils and added standards

    SciTech Connect

    Haddix, Michelle L.; Magrini-Bair, Kim; Evans, Robert J.; Conant, Richard T.; Wallenstein, Matthew D.; Morris, Sherri J.; Calderón, Francisco; Paul, Eldor A.

    2016-12-01

    Soil organic matter (SOM) is extremely complex. It is composed of hundreds of different organic substances and it has been difficult to quantify these diverse substances in a dynamic-ecosystem functioning standpoint. Analytical pyrolysis has been used to compare chemical differences between soils, but its ability to measure the absolute amount of a specific compound in the soil is still in question. Our objective was to assess whether utilizing pyrolysis-molecular beam mass spectroscopy (py-MBMS) to define the signature of known reference compounds (adenine, indole, palmitic acid, etc.) and biological samples (chitin, fungi, cellulose, etc.) separately and when added to whole soils it was possible to make py-MBMS more quantitative. Reference compounds, spanning a wide variety of compound categories, and biological samples, expected to be present in SOM, were added to three soils from Colorado, Ohio, and Massachusetts that have varying total C, % clay, and clay type. Py-MBMS, a rapid analysis technique originally developed to analyze complex biomolecules, flash pyrolyzes soil organic matter to form products that are often considered characteristic of the original molecular structure. Samples were pyrolyzed at 550 degrees C by py-MBMS. All samples were weighed and %C and %N determined both before and after pyrolysis to evaluate mass loss, C loss, and N loss for the samples.An average relationship of r2 = 0.76 (P = 0.005) was found for the amount of cellulose added to soil at 25, 50, and 100% of soil C relative to the ion intensity of select mass/charge of the compound.There was a relationship of r2 = 0.93 (P < 0.001) for the amount of indole added to soil at 25, 50, and 100% of soil C and the ion intensity of the associated mass variables (mass/charge). Comparing spectra of pure compounds with the spectra of the compounds added to soil and isolated clay showed that interference could occur based on soil type and compound with the Massachusetts soil with high C (55

  20. Molar mass, radius of gyration and second virial coefficient from new static light scattering equations for dilute solutions: application to 21 (macro)molecules.

    PubMed

    Illien, Bertrand; Ying, Ruifeng

    2009-05-11

    New static light scattering (SLS) equations for dilute binary solutions are derived. Contrarily to the usual SLS equations [Carr-Zimm (CZ)], the new equations have no need for the experimental absolute Rayleigh ratio of a reference liquid and solely rely on the ratio of scattered intensities of solutions and solvent. The new equations, which are based on polarizability equations, take into account the usual refractive index increment partial differential n/partial differential rho(2) complemented by the solvent specific polarizability and a term proportional to the slope of the solution density rho versus the solute mass concentration rho(2) (density increment). Then all the equations are applied to 21 (macro)molecules with a wide range of molar mass (0.2500 kg mol(-1)), for which the scattered intensity is no longer independent of the scattering angle, the new equations give the same value of the radius of gyration as the CZ equation and consistent values of the second virial coefficient.

  1. The Effects of Added Hydrogen on Noble Gas Discharges Used as Ambient Desorption/Ionization Sources for Mass Spectrometry.

    PubMed

    Ellis, Wade C; Lewis, Charlotte R; Openshaw, Anna P; Farnsworth, Paul B

    2016-09-01

    We demonstrate the effectiveness of using hydrogen-doped argon as the support gas for the dielectric barrier discharge (DBD) ambient desorption/ionization (ADI) source in mass spectrometry. Also, we explore the chemistry responsible for the signal enhancement observed when using both hydrogen-doped argon and hydrogen-doped helium. The hydrogen-doped argon was tested for five analytes representing different classes of molecules. Addition of hydrogen to the argon plasma gas enhanced signals for gas-phase analytes and for analytes coated onto glass slides in positive and negative ion mode. The enhancements ranged from factors of 4 to 5 for gas-phase analytes and factors of 2 to 40 for coated slides. There was no significant increase in the background. The limit of detection for caffeine was lowered by a factor of 79 using H2/Ar and 2 using H2/He. Results are shown that help explain the fundamental differences between the pure-gas discharges and those that are hydrogen-doped for both argon and helium. Experiments with different discharge geometries and grounding schemes indicate that observed signal enhancements are strongly dependent on discharge configuration. Graphical Abstract ᅟ.

  2. The Effects of Added Hydrogen on Noble Gas Discharges Used as Ambient Desorption/Ionization Sources for Mass Spectrometry

    NASA Astrophysics Data System (ADS)

    Ellis, Wade C.; Lewis, Charlotte R.; Openshaw, Anna P.; Farnsworth, Paul B.

    2016-09-01

    We demonstrate the effectiveness of using hydrogen-doped argon as the support gas for the dielectric barrier discharge (DBD) ambient desorption/ionization (ADI) source in mass spectrometry. Also, we explore the chemistry responsible for the signal enhancement observed when using both hydrogen-doped argon and hydrogen-doped helium. The hydrogen-doped argon was tested for five analytes representing different classes of molecules. Addition of hydrogen to the argon plasma gas enhanced signals for gas-phase analytes and for analytes coated onto glass slides in positive and negative ion mode. The enhancements ranged from factors of 4 to 5 for gas-phase analytes and factors of 2 to 40 for coated slides. There was no significant increase in the background. The limit of detection for caffeine was lowered by a factor of 79 using H2/Ar and 2 using H2/He. Results are shown that help explain the fundamental differences between the pure-gas discharges and those that are hydrogen-doped for both argon and helium. Experiments with different discharge geometries and grounding schemes indicate that observed signal enhancements are strongly dependent on discharge configuration.

  3. AdS duals of matrix strings

    NASA Astrophysics Data System (ADS)

    Morales, Jose F.; Samtleben, Henning

    2003-06-01

    We review recent work on the holographic duals of type II and heterotic matrix string theories described by warped AdS3 supergravities. In particular, we compute the spectra of Kaluza-Klein primaries for type I, II supergravities on warped AdS3 × S7 and match them with the primary operators in the dual two-dimensional gauge theories. The presence of non-trivial warp factors and dilaton profiles requires a modification of the familiar dictionary between masses and 'scaling' dimensions of fields and operators. We present these modifications for the general case of domain wall/QFT correspondences between supergravities on warped AdSd+1 × Sq geometries and super Yang-Mills theories with 16 supercharges.

  4. Energy spectrum based calculation of the half and the tenth value layers for brachytherapy sources using a semiempirical parametrized mass attenuation coefficient formulism

    SciTech Connect

    Yue, Ning J.

    2008-06-15

    As different types of radionuclides (e.g., {sup 131}Cs source) are introduced for clinical use in brachytherapy, the question is raised regarding whether a relatively simple method exists for the derivation of values of the half value layer (HVL) or the tenth value layer (TVL). For the radionuclide that has been clinically used for years, such as {sup 125}I and {sup 103}Pd, the sources have been manufactured and marketed by several vendors with different designs and structures. Because of the nature of emission of low energy photons for these radionuclides, energy spectra of the sources are very dependent on their individual designs. Though values of the HVL or the TVL in certain commonly used shielding materials are relatively small for these low energy photon emitting sources, the question remains how the variations in energy spectra affect the HVL (or TVL) values and whether these values can be calculated with a relatively simple method. A more fundamental question is whether a method can be established to derive the HVL (TVL) values for any brachytherapy sources and for different materials in a relatively straightforward fashion. This study was undertaken to answer these questions. Based on energy spectra, a well established semiempirical mass attenuation coefficient computing scheme was utilized to derive the HVL (TVL) values of different materials for different types of brachytherapy sources. The method presented in this study may be useful to estimate HVL (TVL) values of different materials for brachytherapy sources of different designs and containing different radionuclides.

  5. The effect of aeration conditions, characterized by the volumetric mass transfer coefficient K(L)a, on the fermentation kinetics of Bacillus thuringiensis kurstaki.

    PubMed

    Mounsef, Jihane Rahbani; Salameh, Dominique; Louka, Nicolas; Brandam, Cedric; Lteif, Roger

    2015-09-20

    The aeration is a key factor for Bacillus thuringiensis growth, sporulation and δ-endotoxins production. The objective of our work was to study the effect of aeration on the fermentation kinetics of Bacillus thuringiensis kurstaki (Btk), cultivated in a cereal milling byproduct (CMB) mono-component medium, in order to improve the δ-endotoxins productivity. Aeration conditions were systematically characterized by the volumetric mass transfer coefficient KLa. In the 6% CMB culture medium, different values of the maximal specific oxygen uptake rate were obtained at different values of KLa. For KLa of 7.2 h(-1), the growth was inhibited and the sporulation was defective. There was a linear increase of the average specific growth rate and faster sporulation and liberation of spores and δ-endotoxins crystals when KLa was increased between 13.3 h(-1) and 65.5 h(-1). Similar kinetic was observed in cultures performed at KLa equal to 65.5 h(-1) and 106.2 h(-1). The highest toxins productivity of 96.1 mg L(-1) (h)-1 was obtained in the 9% CMB culture medium for KLa of 102 h(-1). It was possible to track the evolution of the bacterial cells between vegetative growth, sporulation and liberation of mature spores by following the variation of the CO2 percent in the effluent gas.

  6. Energy spectrum based calculation of the half and the tenth value layers for brachytherapy sources using a semiempirical parametrized mass attenuation coefficient formulism.

    PubMed

    Yue, Ning J

    2008-06-01

    As different types of radionuclides (e.g., 131Cs source) are introduced for clinical use in brachytherapy, the question is raised regarding whether a relatively simple method exists for the derivation of values of the half value layer (HVL) or the tenth value layer (TVL). For the radionuclide that has been clinically used for years, such as 125I and 103Pd, the sources have been manufactured and marketed by several vendors with different designs and structures. Because of the nature of emission of low energy photons for these radionuclides, energy spectra of the sources are very dependent on their individual designs. Though values of the HVL or the TVL in certain commonly used shielding materials are relatively small for these low energy photon emitting sources, the question remains how the variations in energy spectra affect the HVL (or TVL) values and whether these values can be calculated with a relatively simple method. A more fundamental question is whether a method can be established to derive the HVL (TVL) values for any brachytherapy sources and for different materials in a relatively straightforward fashion. This study was undertaken to answer these questions. Based on energy spectra, a well established semiempirical mass attenuation coefficient computing scheme was utilized to derive the HVL (TVL) values of different materials for different types of brachytherapy sources. The method presented in this study may be useful to estimate HVL (TVL) values of different materials for brachytherapy sources of different designs and containing different radionuclides.

  7. Determining the mass attenuation coefficient, effective atomic number, and electron density of raw wood and binderless particleboards of Rhizophora spp. by using Monte Carlo simulation

    NASA Astrophysics Data System (ADS)

    Marashdeh, Mohammad W.; Al-Hamarneh, Ibrahim F.; Abdel Munem, Eid M.; Tajuddin, A. A.; Ariffin, Alawiah; Al-Omari, Saleh

    Rhizophora spp. wood has the potential to serve as a solid water or tissue equivalent phantom for photon and electron beam dosimetry. In this study, the effective atomic number (Zeff) and effective electron density (Neff) of raw wood and binderless Rhizophora spp. particleboards in four different particle sizes were determined in the 10-60 keV energy region. The mass attenuation coefficients used in the calculations were obtained using the Monte Carlo N-Particle (MCNP5) simulation code. The MCNP5 calculations of the attenuation parameters for the Rhizophora spp. samples were plotted graphically against photon energy and discussed in terms of their relative differences compared with those of water and breast tissue. Moreover, the validity of the MCNP5 code was examined by comparing the calculated attenuation parameters with the theoretical values obtained by the XCOM program based on the mixture rule. The results indicated that the MCNP5 process can be followed to determine the attenuation of gamma rays with several photon energies in other materials.

  8. Performance analysis of a continuous serpentine flow reactor for electrochemical oxidation of synthetic and real textile wastewater: Energy consumption, mass transfer coefficient and economic analysis.

    PubMed

    Pillai, Indu M Sasidharan; Gupta, Ashok K

    2017-05-15

    A continuous flow electrochemical reactor was developed, and its application was tested for the treatment of textile wastewater. A parallel plate configuration with serpentine flow was chosen for the continuous flow reactor. Uniparameter optimization was carried out for electrochemical oxidation of synthetic and real textile wastewater (collected from the inlet of the effluent treatment plant). Chemical Oxygen Demand (COD) removal efficiency of 90% was achieved for synthetic textile wastewater (initial COD - 780 mg L(-1)) at a flow rate of 500 mL h(-1) (retention time of 6 h) and a current density of 1.15 mA cm(-2) and the energy consumption for the degradation was 9.2 kWh (kg COD)(-1). The complete degradation of real textile wastewater (initial COD of 368 mg L(-1)) was obtained at a current density of 1.15 mA cm(-2), NaCl concentration of 1 g L(-1) and retention time of 6 h. Energy consumption and mass transfer coefficient of the reactions were calculated. The continuous flow reactor performed better than batch reactor with reference to energy consumption and economy. The overall treatment cost for complete COD removal of real textile wastewater was 5.83 USD m(-3).

  9. Analysis of selected designer benzodiazepines by UHPLC with high-resolution time-of-flight mass spectrometry and the estimation of their partition coefficients by micellar electrokinetic chromatography.

    PubMed

    Tomková, Jana; Švidrnoch, Martin; Maier, Vítězslav; Ondra, Peter

    2017-03-07

    A new ultra high performance liquid chromatography with electrospray ionization time-of-flight mass spectrometry method for the selective and sensitive separation, identification and determination of selected designer benzodiazepines (namely, pyrazolam, phenazepam, etizolam, flubromazepam, diclazepam, deschloroetizolam, bentazepam, nimetazepam and flubromazolam) in human serum was developed. The separation of the studied designer benzodiazepines was achieved on C18 chromatographic column using gradient elution within 6 min without any significant matrix interferences. Liquid-liquid extraction with butyl acetate was applied for serum samples clean-up and preconcentration of studied designer benzodiazepines. The method was validated in terms of linearity, limit of detection, limit of quantification, matrix effects, specificity, precision, accuracy, recovery and sample stability. The limit of detection values were in range 0.10-0.15 ng/mL. The method was applied on spiked serum sample to demonstrate its applicability for systematic toxicology analysis. Furthermore, a capillary chromatographic method with micellar electrokinetic chromatography was used for the estimation of partition coefficients of studied designer benzodiazepines as important parameters to evaluate their pharmacological and toxicological properties. This article is protected by copyright. All rights reserved.

  10. Hairy AdS solitons

    NASA Astrophysics Data System (ADS)

    Anabalón, Andrés; Astefanesei, Dumitru; Choque, David

    2016-11-01

    We construct exact hairy AdS soliton solutions in Einstein-dilaton gravity theory. We examine their thermodynamic properties and discuss the role of these solutions for the existence of first order phase transitions for hairy black holes. The negative energy density associated to hairy AdS solitons can be interpreted as the Casimir energy that is generated in the dual filed theory when the fermions are antiperiodic on the compact coordinate.

  11. Effect of internal pressure and gas/liquid interface area on the CO mass transfer coefficient using hollow fibre membranes as a high mass transfer gas diffusing system for microbial syngas fermentation.

    PubMed

    Yasin, Muhammad; Park, Shinyoung; Jeong, Yeseul; Lee, Eun Yeol; Lee, Jinwon; Chang, In Seop

    2014-10-01

    This study proposed a submerged hollow fibre membrane bioreactor (HFMBR) system capable of achieving high carbon monoxide (CO) mass transfer for applications in microbial synthesis gas conversion systems. Hydrophobic polyvinylidene fluoride (PVDF) membrane fibres were used to fabricate a membrane module, which was used for pressurising CO in water phase. Pressure through the hollow fibre lumen (P) and membrane surface area per unit working volume of the liquid (A(S)/V(L)) were used as controllable parameters to determine gas-liquid volumetric mass transfer coefficient (k(L)a) values. We found a k(L)a of 135.72 h(-1) when P was 93.76 kPa and AS/VL was fixed at 27.5m(-1). A higher k(L)a of 155.16 h(-1) was achieved by increasing AS/VL to 62.5m(-1) at a lower P of 37.23 kPa. Practicality of HFMBR to support microbial growth and organic product formation was assessed by CO/CO2 fermentation using Eubacterium limosum KIST612.

  12. Decreased-activity mutants of phosphoglucose isomerase in the cytosol and chloroplast of Clarkia xantiana. Impact on mass-action ratios and fluxes to sucrose and starch, and estimation of Flux Control Coefficients and Elasticity Coefficients.

    PubMed Central

    Kruckeberg, A L; Neuhaus, H E; Feil, R; Gottlieb, L D; Stitt, M

    1989-01-01

    1. Subcellular-compartment-specific decreased-activity mutants of phosphoglucose isomerase in Clarkia xantiana were used to analyse the control of sucrose and starch synthesis during photosynthesis. Mutants were available in which the plastid phosphoglucose isomerase complement is decreased to 75% or 50% of the wild-type level, and the cytosol complement to 64%, 36% or 18% of the wild-type level. 2. The effects on the [product]/[substrate] ratio and on fluxes to sucrose or starch and the rate of photosynthesis were studied with the use of saturating or limiting light intensity to impose a high or low flux through these pathways. 3. Removal of a small fraction of either phosphoglucose isomerase leads to a significant shift of the [product]/[substrate] ratio away, from equilibrium. We conclude that there is no 'excess' of enzyme over that needed to maintain its reactants reasonably close to equilibrium. 4. Decreased phosphoglucose isomerase activity can also alter the fluxes to starch or sucrose. However, the effect on flux does not correlate with the extent of disequilibrium, and also varies depending on the subcellular compartment and on the conditions. 5. The results were used to estimate Flux Control Coefficients for the chloroplast and cytosolic phosphoglucose isomerases. The chloroplast isoenzyme exerts control on the rate of starch synthesis and on photosynthesis in saturating light intensity and CO2, but not at low light intensity. The cytosolic enzyme only exerts significant control when its complement is decreased 3-5-fold, and differs from the plastid isoenzyme in exerting more control in low light intensity. It has a positive Control Coefficient for sucrose synthesis, and a negative Control Coefficient for starch synthesis. 6. The Elasticity Coefficients in vivo of the cytosolic phosphoglucose isomerase were estimated to lie between 5 and 8 in the wild-type. They decrease in mutants with a lowered complement of cytosolic phosphoglucose isomerase. 7. The

  13. The SSME HPFTP interstage seals: Analysis and experiments for leakage and reaction-force coefficients

    NASA Technical Reports Server (NTRS)

    Childs, D. W.

    1983-01-01

    An improved theory for the prediction of the rotordynamic coefficients of turbulent annular seals was developed. Predictions from the theory are compared to the experimental results and an approach for the direct calculation of empirical turbulent coefficients from test data are introduced. An improved short seal solution is shown to do a better job of calculating effective stiffness and damping coefficients than either the original short seal solution or a finite length solution. However, the original short seal solution does a much better job of predicting equivalent added mass coefficient.

  14. Elevated corticosterone levels decrease reproductive output of chick-rearing Adélie penguins but do not affect chick mass at fledging

    PubMed Central

    Thierry, Anne-Mathilde; Ropert-Coudert, Yan; Raclot, Thierry

    2013-01-01

    Study of physiological mechanisms can help us to understand how animals respond to changing environmental conditions. In particular, stress hormones (i.e. glucocorticoids, such as corticosterone) are described as mediating resource allocation, allowing animals to adjust their physiology and behaviour to predictable and unpredictable changes in the environment. In this study, we investigated the effects of an experimental increase in baseline corticosterone levels on the breeding effort and the reproductive output of chick-rearing male Adélie penguins (Pygoscelis adeliae). The number of chicks per nest, their body mass, and their size were monitored throughout the study. Direct observations allowed measurement of the time spent foraging at sea and caring for the young on the nest. At the end of the treatment, blood samples were collected for isotope analysis. Although all birds raised at least one chick, reproductive output was decreased by 42% in corticosterone-treated birds compared with control birds. The increase in corticosterone levels during the guard stage did not affect the mass of surviving chicks or the brood mass at fledging. Corticosterone-treated males spent on average 21% more time at the nest than control birds. However, the duration of foraging trips was similar between both groups. In addition, the similarity of isotopic signatures suggests that both groups foraged at similar locations and ingested the same prey species. The detailed on-land behaviour of birds should be examined in further studies to clarify the possible links between corticosterone levels, brooding time, and reproductive output. Understanding the relationships between glucocorticoids, fitness, and ultimately population dynamics is fundamental to enabling conservation physiology as a discipline to be successful in helping to manage species of conservation concern. PMID:27293591

  15. The type of caloric sweetener added to water influences weight gain, fat mass, and reproduction in growing Sprague-Dawley female rats.

    PubMed

    Light, Heather R; Tsanzi, Embedzayi; Gigliotti, Joseph; Morgan, Keri; Tou, Janet C

    2009-06-01

    Caloric sweetened beverages have been suggested to be a major dietary contributor to weight gain, particularly among adolescents. Dietary recommendations are for moderating intakes of added sugars; however, the question remains whether certain types of sugars should be limited. The objective of this study was to determine the effect of drinking different caloric sweetened beverages on the development of adiposity, metabolic, and endocrine disorders. Young (age 28 days) female Sprague-Dawley rats (n = 8-9 rats/group) were randomly assigned to drink either deionized distilled water (ddH2O) or ddH2O sweetened with 13% (w/v) glucose, sucrose, fructose or high fructose corn syrup 55 (HFCS-55) for 8 weeks. Rats drinking caloric sweetened solutions failed to completely compensate for liquid calories ingested by reducing their consumption of solid food. This resulted in greater total energy intake compared to the ddH2O control; however, there was no significant difference in total energy intake between rats drinking sucrose, fructose or HFCS-55. Of the different caloric sweeteners, only rats drinking HFCS-55 had greater (P < 0.05) final body weights and fat mass compared to the rats drinking ddH2O or glucose solution. This may have occurred because drinking HFCS-55 solution promoted a faster body weight gain. Adiposity induced by caloric sweetened water was not accompanied by metabolic disorders indicated by the absence of dyslipidemia and no differences in fasting serum glucose, insulin or C-peptide among the treatment groups. However, rats drinking HFCS-55 showed lengthened estrous cycles due to prolonged estrus. Based on this study, the type of caloric sweetener added to beverages should be considered when making dietary recommendation for reducing excess body weight and related health risk.

  16. Added Sugars

    MedlinePlus

    ... need sugar to function properly. Added sugars contribute zero nutrients but many added calories that can lead to extra pounds or even obesity, thereby reducing heart health. If you think of your daily calorie needs as a budget, you want to “spend” ...

  17. Value Added?

    ERIC Educational Resources Information Center

    UCLA IDEA, 2012

    2012-01-01

    Value added measures (VAM) uses changes in student test scores to determine how much "value" an individual teacher has "added" to student growth during the school year. Some policymakers, school districts, and educational advocates have applauded VAM as a straightforward measure of teacher effectiveness: the better a teacher,…

  18. Evaluation of absorbent materials for use as ad hoc dry decontaminants during mass casualty incidents as part of the UK’s Initial Operational Response (IOR)

    PubMed Central

    Kassouf, Nick; Syed, Sara; Larner, Joanne; Amlôt, Richard

    2017-01-01

    The UK’s Initial Operational Response (IOR) is a revised process for the medical management of mass casualties potentially contaminated with hazardous materials. A critical element of the IOR is the introduction of immediate, on-scene disrobing and decontamination of casualties to limit the adverse health effects of exposure. Ad hoc cleansing of the skin with dry absorbent materials has previously been identified as a potential means of facilitating emergency decontamination. The purpose of this study was to evaluate the in vitro oil and water absorbency of a range of materials commonly found in the domestic and clinical environments and to determine the effectiveness of a small, but representative selection of such materials in skin decontamination, using an established ex vivo model. Five contaminants were used in the study: methyl salicylate, parathion, diethyl malonate, phorate and potassium cyanide. In vitro measurements of water and oil absorbency did not correlate with ex vivo measurements of skin decontamination. When measured ex vivo, dry decontamination was consistently more effective than a standard wet decontamination method (“rinse-wipe-rinse”) for removing liquid contaminants. However, dry decontamination was ineffective against particulate contamination. Collectively, these data confirm that absorbent materials such as wound dressings and tissue paper provide an effective, generic capability for emergency removal of liquid contaminants from the skin surface, but that wet decontamination should be used for non-liquid contaminants. PMID:28152053

  19. Evaluation of absorbent materials for use as ad hoc dry decontaminants during mass casualty incidents as part of the UK's Initial Operational Response (IOR).

    PubMed

    Kassouf, Nick; Syed, Sara; Larner, Joanne; Amlôt, Richard; Chilcott, Robert P

    2017-01-01

    The UK's Initial Operational Response (IOR) is a revised process for the medical management of mass casualties potentially contaminated with hazardous materials. A critical element of the IOR is the introduction of immediate, on-scene disrobing and decontamination of casualties to limit the adverse health effects of exposure. Ad hoc cleansing of the skin with dry absorbent materials has previously been identified as a potential means of facilitating emergency decontamination. The purpose of this study was to evaluate the in vitro oil and water absorbency of a range of materials commonly found in the domestic and clinical environments and to determine the effectiveness of a small, but representative selection of such materials in skin decontamination, using an established ex vivo model. Five contaminants were used in the study: methyl salicylate, parathion, diethyl malonate, phorate and potassium cyanide. In vitro measurements of water and oil absorbency did not correlate with ex vivo measurements of skin decontamination. When measured ex vivo, dry decontamination was consistently more effective than a standard wet decontamination method ("rinse-wipe-rinse") for removing liquid contaminants. However, dry decontamination was ineffective against particulate contamination. Collectively, these data confirm that absorbent materials such as wound dressings and tissue paper provide an effective, generic capability for emergency removal of liquid contaminants from the skin surface, but that wet decontamination should be used for non-liquid contaminants.

  20. Mass

    SciTech Connect

    Quigg, Chris

    2007-12-05

    In the classical physics we inherited from Isaac Newton, mass does not arise, it simply is. The mass of a classical object is the sum of the masses of its parts. Albert Einstein showed that the mass of a body is a measure of its energy content, inviting us to consider the origins of mass. The protons we accelerate at Fermilab are prime examples of Einsteinian matter: nearly all of their mass arises from stored energy. Missing mass led to the discovery of the noble gases, and a new form of missing mass leads us to the notion of dark matter. Starting with a brief guided tour of the meanings of mass, the colloquium will explore the multiple origins of mass. We will see how far we have come toward understanding mass, and survey the issues that guide our research today.

  1. Mass attenuation coefficients of Clear-Pb[reg sign] for photons from [sup 125]I, [sup 103]Pd, [sup 99m]Tc, [sup 192]Ir, [sup 137]Cs, and [sup 60]Co

    SciTech Connect

    Rivard, M.J. . Dept. of Radiation Oncology); Waid, D.S. . Radiation Oncology Dept.); Wierzbicki, J.G. . Cancer Treatment Center)

    1999-11-01

    The mass attenuation coefficients, [mu]/[rho], for Clear-Pb[reg sign] for photon energies ranging from 10 keV to 10 MeV were determined using Monte Carlo methods and simple equations used to manipulate elemental mass attenuation coefficients. It was determined that the effectiveness of Clear-Pb[reg sign] as a radiation shielding material was greater than plain acrylic for all photon energies, especially those less than 150 keV, and for deep penetration problems where the differences in [mu]/[rho] between Clear-Pb[reg sign] as a shielding material when compared with acrylic was determined for the following commonly used radionuclides: [sup 125]I, [sup 103]Pd, [sup 99m]Tc, [sup 192]Ir, [sup 137]Cs, and [sup 60]Co.

  2. Mass attenuation coefficients of Clear-Pb{reg_sign} for photons from {sup 125}I, {sup 103}Pd, {sup 99m}Tc, {sup 192}Ir, {sup 137}Cs, and {sup 60}Co

    SciTech Connect

    Rivard, M.J.; Waid, D.S.; Wierzbicki, J.G.

    1999-11-01

    The mass attenuation coefficients, {mu}/{rho}, for Clear-Pb{reg_sign} for photon energies ranging from 10 keV to 10 MeV were determined using Monte Carlo methods and simple equations used to manipulate elemental mass attenuation coefficients. It was determined that the effectiveness of Clear-Pb{reg_sign} as a radiation shielding material was greater than plain acrylic for all photon energies, especially those less than 150 keV, and for deep penetration problems where the differences in {mu}/{rho} between Clear-Pb{reg_sign} as a shielding material when compared with acrylic was determined for the following commonly used radionuclides: {sup 125}I, {sup 103}Pd, {sup 99m}Tc, {sup 192}Ir, {sup 137}Cs, and {sup 60}Co.

  3. Investigation of mass attenuation coefficient of almond gum bonded Rhizophora spp. particleboard as equivalent human tissue using XRF technique in the 16.6-25.3 keV photon energy.

    PubMed

    Ababneh, Baker; Tajuddin, Abd Aziz; Hashim, Rokiah; Shuaib, Ibrahim Lutfi

    2016-12-01

    This paper reports the novel use of almond gum as a binder in manufacturing Rhizophora spp. particleboard. X-ray fluorescence spectroscopy was employed for analysis under photon energy range of 16.6-25.3 keV. Results showed that almond gum-bonded Rhizophora spp. particleboard can be used as tissue-equivalent phantom in diagnostic radiation. The calculated mass attenuation coefficients of the particleboards were consistent with the values of water calculated using XCOM program for the same photon energies, with p values of 0.056, 0.069, and 0.077 for samples A8, C0, and C8, respectively. However, no direct relationship was found between the percentage of adhesive and the mass attenuation coefficient. The results positively supported the use of almond gum as a binding agent in the fabrication of particleboards, which can be used as a phantom material in dosimetric and quality control applications.

  4. Adding Value.

    ERIC Educational Resources Information Center

    Orsini, Larry L.; Hudack, Lawrence R.; Zekan, Donald L.

    1999-01-01

    The value-added statement (VAS), relatively unknown in the United States, is used in financial reports by many European companies. Saint Bonaventure University (New York) has adapted a VAS to make it appropriate for not-for-profit universities by identifying stakeholder groups (students, faculty, administrators/support personnel, creditors, the…

  5. Direction of associations between added sugar intake in early childhood and body mass index at age 7 years may depend on intake levels.

    PubMed

    Herbst, Antje; Diethelm, Katharina; Cheng, Guo; Alexy, Ute; Icks, Andrea; Buyken, Anette E

    2011-07-01

    Dietary factors, especially during early childhood, have been discussed as potentially critical for the development of childhood overweight. This study evaluated associations between added sugar intake during early childhood and BMI and body fat at age 7 y. Analysis was based on data from 216 participants of the Dortmund Nutritional and Anthropometric Longitudinally Designed (DONALD) Study. Life-course plots were constructed to evaluate the association between added sugar intake at different ages (0.5, 1, 1.5, and 2 y) and BMI SD score (BMI-SDS) and % body fat (%BF) at age 7 y. Multivariable analyses were performed for the periods identified as critical for later BMI and body fat. Added sugar intake at age 1 y and the change in intake levels during the second year of life emerged as potentially critical. At age 1 y, a higher total added sugar intake was related to a lower BMI-SDS at age 7 y [adjusted β ± SE: -0.116 ± 0.057 BMI-SDS/percent energy (%En) added sugar; P = 0.04]. Conversely, an increase in total added sugar in the second year of life (Δ%En between age 1 and 2 y) tended to be associated with a higher BMI-SDS (adjusted β ± SE: 0.074 ± 0.043 BMI-SDS/Δ%En added sugar; P = 0.09). No associations were observed with %BF. In conclusion, added sugar intake at low intake levels during early childhood does not appear to be critical for BMI and body fat at age 7 y. However, detrimental effects on BMI development may emerge when added sugar intakes are increased to higher levels.

  6. Protection of total body water content and absence of hyperthermia despite 2% body mass loss ('voluntary dehydration') in soldiers drinking ad libitum during prolonged exercise in cool environmental conditions.

    PubMed

    Nolte, Heinrich W; Noakes, Timothy D; van Vuuren, Bernard

    2011-11-01

    The extent to which humans need to replace fluid losses during exercise remains contentious despite years of focused research. The primary objective was to evaluate ad libitum drinking on hydration status to determine whether body mass loss can be used as an accurate surrogate for changes in total body water (TBW) during exercise. Data were collected during a 14.6-km route march (wet bulb globe temperature of 14.1°C ). 18 subjects with an average age of 26 ± 2.5 (SD) years participated. Their mean ad libitum total fluid intake was 2.1 ± 1.4 litres during the exercise. Predicted sweat rate was 1.289 ± 0.530 l/h. There were no significant changes (p>0.05) in TBW, urine specific gravity or urine osmolality despite an average body mass loss (p<0.05) of 1.3 ± 0.45 kg during the march. Core temperature rose as a function of marching speed and was unrelated to the % change in body mass. This suggests that changes in mass do not accurately predict changes in TBW (r=-0.16) because either the body mass loss during exercise includes losses other than water or there is an endogenous body water source that is released during exercise not requiring replacement during exercise, or both. Ad libitum water replacement between 65% and 70% of sweat losses maintained safe levels of hydration during the experiment. The finding that TBW was protected by ad libitum drinking despite approximately 2% body mass loss suggests that the concept of 'voluntary dehydration' may require revision.

  7. Measurement of the x-ray mass attenuation coefficient and determination of the imaginary component of the atomic form factor of tin over the energy range of 29-60keV

    NASA Astrophysics Data System (ADS)

    de Jonge, Martin D.; Tran, Chanh Q.; Chantler, Christopher T.; Barnea, Zwi; Dhal, Bipin B.; Paterson, David; Kanter, Elliot P.; Southworth, Stephen H.; Young, Linda; Beno, Mark A.; Linton, Jennifer A.; Jennings, Guy

    2007-03-01

    We use the x-ray extended-range technique (XERT) [C. T. Chantler , Phys. Rev. A 64, 062506 (2001)] to measure the mass attenuation coefficients of tin in the x-ray energy range of 29-60keV to 0.04-3% accuracy, and typically in the range 0.1-0.2% . Measurements made over an extended range of the measurement parameter space are critically examined to identify, quantify, and correct a number of potential experimental systematic errors. These results represent the most extensive experimental data set for tin and include absolute mass attenuation coefficients in the regions of x-ray absorption fine structure, extended x-ray absorption fine structure, and x-ray absorption near-edge structure. The imaginary component of the atomic form factor f2 is derived from the photoelectric absorption after subtracting calculated Rayleigh and Compton scattering cross sections from the total attenuation. Comparison of the result with tabulations of calculated photoelectric absorption coefficients indicates that differences of 1-2% persist between calculated and observed values.

  8. Biomarker- and similarity coefficient-based approaches to bacterial mixture characterization using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS)

    PubMed Central

    Zhang, Lin; Smart, Sonja; Sandrin, Todd R

    2015-01-01

    MALDI-TOF MS profiling has been shown to be a rapid and reliable method to characterize pure cultures of bacteria. Currently, there is keen interest in using this technique to identify bacteria in mixtures. Promising results have been reported with two- or three-isolate model systems using biomarker-based approaches. In this work, we applied MALDI-TOF MS-based methods to a more complex model mixture containing six bacteria. We employed: 1) a biomarker-based approach that has previously been shown to be useful in identification of individual bacteria in pure cultures and simple mixtures and 2) a similarity coefficient-based approach that is routinely and nearly exclusively applied to identification of individual bacteria in pure cultures. Both strategies were developed and evaluated using blind-coded mixtures. With regard to the biomarker-based approach, results showed that most peaks in mixture spectra could be assigned to those found in spectra of each component bacterium; however, peaks shared by two isolates as well as peaks that could not be assigned to any individual component isolate were observed. For two-isolate blind-coded samples, bacteria were correctly identified using both similarity coefficient- and biomarker-based strategies, while for blind-coded samples containing more than two isolates, bacteria were more effectively identified using a biomarker-based strategy. PMID:26537565

  9. Functional constraints on phenomenological coefficients

    NASA Astrophysics Data System (ADS)

    Klika, Václav; Pavelka, Michal; Benziger, Jay B.

    2017-02-01

    Thermodynamic fluxes (diffusion fluxes, heat flux, etc.) are often proportional to thermodynamic forces (gradients of chemical potentials, temperature, etc.) via the matrix of phenomenological coefficients. Onsager's relations imply that the matrix is symmetric, which reduces the number of unknown coefficients is reduced. In this article we demonstrate that for a class of nonequilibrium thermodynamic models in addition to Onsager's relations the phenomenological coefficients must share the same functional dependence on the local thermodynamic state variables. Thermodynamic models and experimental data should be validated through consistency with the functional constraint. We present examples of coupled heat and mass transport (thermodiffusion) and coupled charge and mass transport (electro-osmotic drag). Additionally, these newly identified constraints further reduce the number of experiments needed to describe the phenomenological coefficient.

  10. Laboratory Determination of Gas-Side Mass Transfer Coefficients Applicable to Soil Venting Systems for Removing Petroleum Hydrocarbons from Vadose Zone Soils

    DTIC Science & Technology

    1991-01-01

    monolayers situated on either side of this interface (Treybal, 1980; Henley and Seader , 1981). This equilibrium condition may be used to describe mass transfer...W.F. Reehl and D.H. Rosenblatt, eds., Handbook of Chemical Property Estimation Methods, American Chemical Society, 1990. Henley, E.J. and J.D. Seader

  11. Laboratory-Scale Column Testing Using IONSIV IE-911 for Removing Cesium from Acidic Tank Waste Simulant. 2: Determination of Cesium Exchange Capacity and Effective Mass Transfer Coefficient from a 500-cm3 Column Experiement

    SciTech Connect

    T.J. Tranter; R.D. Tillotson; T.A. Todd

    2005-04-01

    A semi-scale column test was performed using a commercial form of crystalline silicotitanate (CST) for removing radio-cesium from a surrogate acidic tank solution, which represents liquid waste stored at the Idaho National Engineering and Environmental Laboratory (INEEL). The engineered form of CST ion exchanger, known as IONSIVtmIE-911 (UOP, Mt. Laurel,NJ, USA), was tested in a 500-cm3 column to obtain a cesium breakthrough curve. The cesium exchange capacity of this column matched that obtained from previous testing with a 15-mc3 column. A numerical algorithm using implicit finite difference approximations was developed to solve the governing mass transport equations for the CST columns. An effective mass transfer coefficient was derived from solving these equations for previously reported 15 cm3 tests. The effective mass transfer coefficient was then used to predict the cesium breakthrough curve for the 500-cm3 column and compared to the experimental data reported in this paper. The calculated breakthrough curve showed excellent agreement with the data from the 500-cm3 column even though the interstitial velocity was a factor of two greater. Thus, this approach should provide a reasonable method for scale up to larger columns for treating actual tank waste.

  12. Mass accommodation coefficient measurements for HNO3, HCl and N2O5 on water, ice and aqueous sulfuric acid droplet surfaces

    NASA Technical Reports Server (NTRS)

    Worsnop, Douglas; Zahniser, Mark; Kolb, Charles; Watson, Lyn; Vandoren, Jane; Jayne, John; Davidovits, Paul

    1988-01-01

    Preliminary results are reported of the direct measurement of accommodation coefficients for HNO3, N2O5 and HCl on water drops, aqueous sulfuric acid drops and ice particles. The heterogeneous chemistry of these species together with ClONO2 has been implicated in the ozone depletion observed in the Antarctic stratosphere during the spring in the last eight years. The most plausible chemical mechanism involves the removal of nitrogen oxide species via condensation on ice particles in polar stratospheric clouds resulting in a increase in the active chlorine species responsible for the ozone depletion. The observation of low NO2 and high ClO densities in the Antarctic stratosphere last summer appear to be consistent with such a mechanism.

  13. Charge carrier effective mass and concentration derived from combination of Seebeck coefficient and Te125 NMR measurements in complex tellurides

    SciTech Connect

    Levin, E. M.

    2016-06-27

    Thermoelectric materials utilize the Seebeck effect to convert heat to electrical energy. The Seebeck coefficient (thermopower), S, depends on the free (mobile) carrier concentration, n, and effective mass, m*, as S ~ m*/n2/3. The carrier concentration in tellurides can be derived from 125Te nuclear magnetic resonance (NMR) spin-lattice relaxation measurements. The NMR spin-lattice relaxation rate, 1/T1, depends on both n and m* as 1/T1~(m*)3/2n (within classical Maxwell-Boltzmann statistics) or as 1/T1~(m*)2n2/3 (within quantum Fermi-Dirac statistics), which challenges the correct determination of the carrier concentration in some materials by NMR. Here it is shown that the combination of the Seebeck coefficient and 125Te NMR spin-lattice relaxation measurements in complex tellurides provides a unique opportunity to derive the carrier effective mass and then to calculate the carrier concentration. This approach was used to study AgxSbxGe50–2xTe50, well-known GeTe-based high-efficiency tellurium-antimony-germanium-silver thermoelectric materials, where the replacement of Ge by [Ag+Sb] results in significant enhancement of the Seebeck coefficient. Thus, values of both m* and n derived using this combination show that the enhancement of thermopower can be attributed primarily to an increase of the carrier effective mass and partially to a decrease of the carrier concentration when the [Ag+Sb] content increases.

  14. Internal structure of charged AdS black holes

    NASA Astrophysics Data System (ADS)

    Bhattacharjee, Srijit; Sarkar, Sudipta; Virmani, Amitabh

    2016-06-01

    When an electrically charged black hole is perturbed, its inner horizon becomes a singularity, often referred to as the Poisson-Israel mass inflation singularity. Ori constructed a model of this phenomenon for asymptotically flat black holes, in which the metric can be determined explicitly in the mass inflation region. In this paper we implement the Ori model for charged AdS black holes. We find that the mass function inflates faster than the flat space case as the inner horizon is approached. Nevertheless, the mass inflation singularity is still a weak singularity: Although spacetime curvature becomes infinite, tidal distortions remain finite on physical objects attempting to cross it.

  15. COMPARISON OF TIME-OF-FLIGHT AND DOUBLE FOCUSING MASS SPECTROMETRY FOR REACHING TENTATIVE IDENTIFICATIONS FOR UNANTICIPATED COMPOUNDS ADDED TO DRINKING WATER BY TERRORISTS

    EPA Science Inventory

    Local monitoring of post-treatment drinking water using bench-top mass spectrometers could identify target compounds in a mass spectral library. However, a terrorist might seek to incite greater hysteria by injecting or infusing a mixture of unanticipated compounds of unknown tox...

  16. Differentiating the Bishop ash bed and related tephra layers by elemental-based similarity coefficients of volcanic glass shards using solution inductively coupled plasma-mass spectrometry (S-ICP-MS)

    USGS Publications Warehouse

    Knott, J.R.; Sarna-Wojcicki, A. M.; Montanez, I.P.; Wan, E.

    2007-01-01

    Volcanic glass samples from the same volcanic center (intra-source) often have a similar major-element composition. Thus, it can be difficult to distinguish between individual tephra layers, particularly when using similarity coefficients calculated from electron microprobe major-element measurements. Minor/trace element concentrations in glass can be determined by solution inductively coupled plasma mass spectrometry (S-ICP-MS), but have not been shown as suitable for use in large tephrochronologic databases. Here, we present minor/trace-element concentrations measured by S-ICP-MS and compare these data by similarity coefficients, the method commonly used in large databases. Trial samples from the Bishop Tuff, the upper and lower tuffs of Glass Mountain and the tuffs of Mesquite Spring suites from eastern California, USA, which have an indistinguishable major-element composition, were analyzed using S-ICP-MS. The resulting minor/trace element similarity coefficients clearly separated the suites of tephra layers and, in most cases, individual tephra layers within each suite. Comparisons with previous instrumental neutron activation analysis (INAA) elemental measurements were marginally successful. This is important step toward quantitative correlation in large tephrochronologic databases to achieve definitive identification of volcanic glass samples and for high-resolution age determinations. ?? 2007 Elsevier Ltd and INQUA.

  17. AdS2 holographic dictionary

    NASA Astrophysics Data System (ADS)

    Cvetič, Mirjam; Papadimitriou, Ioannis

    2016-12-01

    We construct the holographic dictionary for both running and constant dilaton solutions of the two dimensional Einstein-Maxwell-Dilaton theory that is obtained by a circle reduction from Einstein-Hilbert gravity with negative cosmological constant in three dimensions. This specific model ensures that the dual theory has a well defined ultraviolet completion in terms of a two dimensional conformal field theory, but our results apply qualitatively to a wider class of two dimensional dilaton gravity theories. For each type of solutions we perform holographic renormalization, compute the exact renormalized one-point functions in the presence of arbitrary sources, and derive the asymptotic symmetries and the corresponding conserved charges. In both cases we find that the scalar operator dual to the dilaton plays a crucial role in the description of the dynamics. Its source gives rise to a matter conformal anomaly for the running dilaton solutions, while its expectation value is the only non trivial observable for constant dilaton solutions. The role of this operator has been largely overlooked in the literature. We further show that the only non trivial conserved charges for running dilaton solutions are the mass and the electric charge, while for constant dilaton solutions only the electric charge is non zero. However, by uplifting the solutions to three dimensions we show that constant dilaton solutions can support non trivial extended symmetry algebras, including the one found by Compère, Song and Strominger [1], in agreement with the results of Castro and Song [2]. Finally, we demonstrate that any solution of this specific dilaton gravity model can be uplifted to a family of asymptotically AdS2 × S 2 or conformally AdS2 × S 2 solutions of the STU model in four dimensions, including non extremal black holes. The four dimensional solutions obtained by uplifting the running dilaton solutions coincide with the so called `subtracted geometries', while those obtained

  18. Contribution to the benchmark for ternary mixtures: Measurement of the Soret and thermodiffusion coefficients of tetralin+isobutylbenzene+n-dodecane at a composition of (0.8/0.1/0.1) mass fractions by two-color optical beam deflection.

    PubMed

    Gebhardt, M; Köhler, W

    2015-04-01

    Within the framework of an international benchmark test we have performed measurements of the Soret and thermodiffusion coefficients of the organic ternary mixture (0.8/0.1/0.1 mass fraction) of 1,2,3,4-tetrahydronaphthaline (THN), isobutylbenzene (IBB) and n -dodecane (n C12) at 298.15K by means of a two-color optical beam deflection technique (OBD). The data evaluation procedure is based on a least squares fitting routine for an approximate analytical solution for the Soret cell problem. The condition number of the contrast factor matrix and standard error propagation are used for an error estimation for the measured Soret and thermodiffusion coefficients. The Soret coefficients obtained are S (') T(THN) = (1.20±0.09)×10(-3) K^-1, S (') T(IBB) = (- 0.34±0.14)×10(-3) K^-1, and S (') T(nC12) = (- 0.86±0.06)×10(-3) K^-1 and the corresponding thermodiffusion coefficients are D (') T(THN) = (0.72±0.26)×10(-12) m^2(s K)^-1, D (') T(IBB) = (- 0.22±0.42)×10(-12) m^2(s K)^-1, and D (') T(nC12) = (- 0.50±0.16)×10(-12) m^2(s K)^-1. These results will be used as ground-based reference data for the DCMIX project, where thermodiffusion experiments of ternary mixtures are measured in a microgravity environment aboard the International Space Station (ISS).

  19. Effective Viscosity Coefficient of Nanosuspensions

    NASA Astrophysics Data System (ADS)

    Rudyak, V. Ya.; Belkin, A. A.; Egorov, V. V.

    2008-12-01

    Systematic calculations of the effective viscosity coefficient of nanosuspensions have been performed using the molecular dynamics method. It is established that the viscosity of a nanosuspension depends not only on the volume concentration of the nanoparticles but also on their mass and diameter. Differences from Einstein's relation are found even for nanosuspensions with a low particle concentration.

  20. The Corrected Eta-Squared Coefficient: A Value Added Approach.

    ERIC Educational Resources Information Center

    Barnette, J. Jackson; McLean, James E.

    Eta-Squared (ES) is often used as a measure of strength of association of an effect, a measure often associated with effect size. It is also considered the proportion of total variance accounted for by an independent variable. It is simple to compute and interpret. However, it has one critical weakness cited by several authors (C. Huberty, 1994;…

  1. Solutions of free higher spins in AdS

    NASA Astrophysics Data System (ADS)

    Lü, H.; Shao, Kai-Nan

    2011-11-01

    We consider free massive and massless higher integer spins in AdS backgrounds in general D dimensions. We obtain the solutions corresponding to the highest-weight state of the spin-ℓ representations of the SO (2 , D - 1) isometry groups. The solution for the spin-ℓ field is expressed recursively in terms of that for the spin- (ℓ - 1). Thus starting from the explicit spin-0, all the higher-spin solutions can be obtained. These solutions allow us to derive the generalized Breitenlohner-Freedman bound, and analyze the asymptotic falloffs. In particular, solutions with negative mass square in general have falloffs slower than those of the Schwarzschild AdS black holes in the AdS boundaries.

  2. Factor Scores, Structure Coefficients, and Communality Coefficients

    ERIC Educational Resources Information Center

    Goodwyn, Fara

    2012-01-01

    This paper presents heuristic explanations of factor scores, structure coefficients, and communality coefficients. Common misconceptions regarding these topics are clarified. In addition, (a) the regression (b) Bartlett, (c) Anderson-Rubin, and (d) Thompson methods for calculating factor scores are reviewed. Syntax necessary to execute all four…

  3. New limb-darkening coefficients for PHOENIX/1D model atmospheres. I. Calculations for 1500 K ≤ Teff ≤ 4800 K Kepler, CoRot, Spitzer, uvby, UBVRIJHK, Sloan, and 2MASS photometric systems

    NASA Astrophysics Data System (ADS)

    Claret, A.; Hauschildt, P. H.; Witte, S.

    2012-10-01

    Aims: The knowledge of how the specific intensity is distributed over the stellar disk is crucial for interpreting the light curves of extrasolar transiting planets, double-lined eclipsing binaries, and other astrophysical phenomena. To provide theoretical inputs for light curve modelling codes, we present new calculations of limb-darkening coefficients for the spherically symmetric phoenix models. Methods: The limb-darkening coefficients were computed by covering the transmission curves of Kepler, CoRoT, and Spitzer space missions, as well as the passbands of the Strömgren, Johnson-Cousins, Sloan, and 2MASS. These computations adopted the least-square method. In addition, we also calculated the linear and bi-parametric approximations by adopting the flux conservation method as an additional tool for estimating the theoretical error bars in the limb-darkening coefficients. Results: Six laws were used to describe the specific intensity distribution: linear, quadratic, square root, logarithmic, exponential, and a more general one with 4 terms. The computations are presented for the solar chemical composition, with log g varying between 2.5 and 5.5 and effective temperatures between 1500-4800 K. The adopted microturbulent velocity and the mixing-length parameters are 2.0 km s-1 and 2.0, respectively. Tables 2-25 are only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/546/A14

  4. Orientifolded locally AdS3 geometries

    NASA Astrophysics Data System (ADS)

    Loran, F.; Sheikh-Jabbari, M. M.

    2011-01-01

    Continuing the analysis of [Loran F and Sheikh-Jabbari M M 2010 Phys. Lett. B 693 184-7], we classify all locally AdS3 stationary axi-symmetric unorientable solutions to AdS3 Einstein gravity and show that they are obtained by applying certain orientifold projection on AdS3, BTZ or AdS3 self-dual orbifold, respectively, O-AdS3, O-BTZ and O-SDO geometries. Depending on the orientifold fixed surface, the O-surface, which is either a space-like 2D plane or a cylinder, or a light-like 2D plane or a cylinder, one can distinguish four distinct cases. For the space-like orientifold plane or cylinder cases, these geometries solve AdS3 Einstein equations and are hence locally AdS3 everywhere except at the O-surface, where there is a delta-function source. For the light-like cases, the geometry is a solution to Einstein equations even at the O-surface. We discuss the causal structure for static, extremal and general rotating O-BTZ and O-SDO cases as well as the geodesic motion on these geometries. We also discuss orientifolding Poincaré patch AdS3 and AdS2 geometries as a way to geodesic completion of these spaces and comment on the 2D CFT dual to the O-geometries.

  5. In situ study of mass transfer in aqueous solutions under high pressures via Raman spectroscopy: A new method for the determination of diffusion coefficients of methane in water near hydrate formation conditions

    USGS Publications Warehouse

    Lu, W.J.; Chou, I.-Ming; Burruss, R.C.; Yang, M.Z.

    2006-01-01

    A new method was developed for in situ study of the diffusive transfer of methane in aqueous solution under high pressures near hydrate formation conditions within an optical capillary cell. Time-dependent Raman spectra of the solution at several different spots along the one-dimensional diffusion path were collected and thus the varying composition profile of the solution was monitored. Diffusion coefficients were estimated by the least squares method based on the variations in methane concentration data in space and time in the cell. The measured diffusion coefficients of methane in water at the liquid (L)-vapor (V) stable region and L-V metastable region are close to previously reported values determined at lower pressure and similar temperature. This in situ monitoring method was demonstrated to be suitable for the study of mass transfer in aqueous solution under high pressure and at various temperature conditions and will be applied to the study of nucleation and dissolution kinetics of methane hydrate in a hydrate-water system where the interaction of methane and water would be more complicated than that presented here for the L-V metastable condition. ?? 2006 Society for Applied Spectroscopy.

  6. In situ study of mass transfer in aqueous solutions under high pressures via Raman spectroscopy: a new method for the determination of diffusion coefficients of methane in water near hydrate formation conditions.

    PubMed

    Lu, W J; Chou, I M; Burruss, R C; Yang, M Z

    2006-02-01

    A new method was developed for in situ study of the diffusive transfer of methane in aqueous solution under high pressures near hydrate formation conditions within an optical capillary cell. Time-dependent Raman spectra of the solution at several different spots along the one-dimensional diffusion path were collected and thus the varying composition profile of the solution was monitored. Diffusion coefficients were estimated by the least squares method based on the variations in methane concentration data in space and time in the cell. The measured diffusion coefficients of methane in water at the liquid (L)-vapor (V) stable region and L-V metastable region are close to previously reported values determined at lower pressure and similar temperature. This in situ monitoring method was demonstrated to be suitable for the study of mass transfer in aqueous solution under high pressure and at various temperature conditions and will be applied to the study of nucleation and dissolution kinetics of methane hydrate in a hydrate-water system where the interaction of methane and water would be more complicated than that presented here for the L-V metastable condition.

  7. Determination of polydimethylsiloxane–water partition coefficients for ten 1-chloro-4-[2,2,2-trichloro-1-(4-chlorophenyl)ethyl]benzene-related compounds and twelve polychlorinated biphenyls using gas chromatography/mass spectrometry

    USGS Publications Warehouse

    Eganhouse, Robert P.

    2016-01-01

    Polymer-water partition coefficients (Kpw) of ten DDT-related compounds were determined in pure water at 25 °C using commercial polydimethylsiloxane-coated optical fiber. Analyte concentrations were measured by thermal desorption-gas chromatography/full scan mass spectrometry (TD–GC/MSFS; fibers) and liquid injection-gas chromatography/selected ion monitoring mass spectrometry (LI–GC/MSSIM; water). Equilibrium was approached from two directions (fiber uptake and depletion) as a means of assessing data concordance. Measured compound-specific log Kpw values ranged from 4.8 to 6.1 with an average difference in log Kpw between the two approaches of 0.05 log units (∼12% of Kpw). Comparison of the experimentally-determined log Kpw values with previously published data confirmed the consistency of the results and the reliability of the method. A second experiment was conducted with the same ten DDT-related compounds and twelve selected PCB (polychlorinated biphenyl) congeners under conditions characteristic of a coastal marine field site (viz., seawater, 11 °C) that is currently under investigation for DDT and PCB contamination. Equilibration at lower temperature and higher ionic strength resulted in an increase in log Kpw for the DDT-related compounds of 0.28–0.49 log units (61–101% of Kpw), depending on the analyte. The increase in Kpw would have the effect of reducing by approximately half the calculated freely dissolved pore-water concentrations (Cfree). This demonstrates the importance of determining partition coefficients under conditions as they exist in the field.

  8. Computational investigation of longitudinal diffusion, eddy dispersion, and trans-particle mass transfer in bulk, random packings of core-shell particles with varied shell thickness and shell diffusion coefficient.

    PubMed

    Daneyko, Anton; Hlushkou, Dzmitry; Baranau, Vasili; Khirevich, Siarhei; Seidel-Morgenstern, Andreas; Tallarek, Ulrich

    2015-08-14

    In recent years, chromatographic columns packed with core-shell particles have been widely used for efficient and fast separations at comparatively low operating pressure. However, the influence of the porous shell properties on the mass transfer kinetics in core-shell packings is still not fully understood. We report on results obtained with a modeling approach to simulate three-dimensional advective-diffusive transport in bulk random packings of monosized core-shell particles, covering a range of reduced mobile phase flow velocities from 0.5 up to 1000. The impact of the effective diffusivity of analyte molecules in the porous shell and the shell thickness on the resulting plate height was investigated. An extension of Giddings' theory of coupled eddy dispersion to account for retention of analyte molecules due to stagnant regions in porous shells with zero mobile phase flow velocity is presented. The plate height equation involving a modified eddy dispersion term excellently describes simulated data obtained for particle-packings with varied shell thickness and shell diffusion coefficient. It is confirmed that the model of trans-particle mass transfer resistance of core-shell particles by Kaczmarski and Guiochon [42] is applicable up to a constant factor. We analyze individual contributions to the plate height from different mass transfer mechanisms in dependence of the shell parameters. The simulations demonstrate that a reduction of plate height in packings of core-shell relative to fully porous particles arises mainly due to reduced trans-particle mass transfer resistance and transchannel eddy dispersion.

  9. Evaluation of recent glacier recession in the Cordillera Blanca, Peru (AD 1962 1999): spatial distribution of mass loss and climatic forcing

    NASA Astrophysics Data System (ADS)

    Mark, Bryan G.; Seltzer, Geoffrey O.

    2005-11-01

    We use a combination of aerial photogrammetry, satellite imagery, and differential GPS mapping to quantify the volume of ice lost between AD 1962 and 1999 from three glaciers on Nevado Queshque in the Cordillera Blanca, Perú (˜10°S). The largest averaged surface lowering (thinning) occurred in the southwest aspect (22 m) and the least in the eastern aspect (5 m). A heuristic sensitivity analysis indicates that 9.3 W m -2 was required to melt the total observed ice loss and this can be explained by sensible heat transfer related to a temperature rise of 1 °C, combined with a latent heat decrease related to a 0.14 g kg -1 increase in specific humidity. A first-difference analysis of temperature records from 29 stations in the Cordillera Blanca shows an average rising trend of 0.26 °C per decade over the 37 year interval, more than adequate to supply the hypothesized sensible heat transfer. A simple transmittivity model within a digital elevation model indicates solar radiation related to altered cloudiness was not a predominant climatic forcing. The distribution of glacier area with altitude calculated with the digital terrain model explains the observed asymmetrical ice melt.

  10. Coset construction of AdS particle dynamics

    NASA Astrophysics Data System (ADS)

    Heinze, Martin; Jorjadze, George; Megrelidze, Luka

    2017-01-01

    We analyze the dynamics of the AdSN+1 particle realized on the coset SO(2, N)/SO (1,N). Hamiltonian reduction provides the physical phase space in terms of the coadjoint orbit obtained by boosting a timelike element of 𝔰𝔬(2, N). We show equivalence of this approach to geometric quantization and to the SO(N) covariant oscillator description, for which the boost generators entail a complicated operator ordering. As an alternative scheme, we introduce dual oscillator variables and derive their algebra at the classical and the quantum levels. This simplifies the calculations of the commutators for the boost generators and leads to unitary irreducible representations of 𝔰𝔬(2, N) for all admissible values of the mass parameter. We furthermore discuss an SO(N) covariant supersymmetric extension of the oscillator quantization, with its realization for superparticles in AdS2 and AdS3 given by recent works.

  11. A high resolution model of linear trend in mass variations from DMT-2: Added value of accounting for coloured noise in GRACE data

    NASA Astrophysics Data System (ADS)

    Farahani, Hassan H.; Ditmar, Pavel; Inácio, Pedro; Didova, Olga; Gunter, Brian; Klees, Roland; Guo, Xiang; Guo, Jing; Sun, Yu; Liu, Xianglin; Zhao, Qile; Riva, Riccardo

    2017-01-01

    We present a high resolution model of the linear trend in the Earth's mass variations based on DMT-2 (Delft Mass Transport model, release 2). DMT-2 was produced primarily from K-Band Ranging (KBR) data of the Gravity Recovery And Climate Experiment (GRACE). It comprises a time series of monthly solutions complete to spherical harmonic degree 120. A novel feature in its production was the accurate computation and incorporation of stochastic properties of coloured noise when processing KBR data. The unconstrained DMT-2 monthly solutions are used to estimate the linear trend together with a bias, as well as annual and semi-annual sinusoidal terms. The linear term is further processed with an anisotropic Wiener filter, which uses full noise and signal covariance matrices. Given the fact that noise in an unconstrained model of the trend is reduced substantially as compared to monthly solutions, the Wiener filter associated with the trend is much less aggressive compared to a Wiener filter applied to monthly solutions. Consequently, the trend estimate shows an enhanced spatial resolution. It allows signals in relatively small water bodies, such as Aral sea and Ladoga lake, to be detected. Over the ice sheets, it allows for a clear identification of signals associated with some outlet glaciers or their groups. We compare the obtained trend estimate with the ones from the CSR-RL05 model using (i) the same approach based on monthly noise covariance matrices and (ii) a commonly-used approach based on the DDK-filtered monthly solutions. We use satellite altimetry data as independent control data. The comparison demonstrates a high spatial resolution of the DMT-2 linear trend. We link this to the usage of high-accuracy monthly noise covariance matrices, which is due to an accurate computation and incorporation of coloured noise when processing KBR data. A preliminary comparison of the linear trend based on DMT-2 with that computed from GSFC_global_mascons_v01 reveals, among

  12. Segmented strings in AdS 3

    NASA Astrophysics Data System (ADS)

    Callebaut, Nele; Gubser, Steven S.; Samberg, Andreas; Toldo, Chiara

    2015-11-01

    We study segmented strings in flat space and in AdS 3. In flat space, these well known classical motions describe strings which at any instant of time are piecewise linear. In AdS 3, the worldsheet is composed of faces each of which is a region bounded by null geodesics in an AdS 2 subspace of AdS 3. The time evolution can be described by specifying the null geodesic motion of kinks in the string at which two segments are joined. The outcome of collisions of kinks on the worldsheet can be worked out essentially using considerations of causality. We study several examples of closed segmented strings in AdS 3 and find an unexpected quasi-periodic behavior. We also work out a WKB analysis of quantum states of yo-yo strings in AdS 5 and find a logarithmic term reminiscent of the logarithmic twist of string states on the leading Regge trajectory.

  13. Conserved charges in timelike warped AdS3 spaces

    NASA Astrophysics Data System (ADS)

    Donnay, L.; Fernández-Melgarejo, J. J.; Giribet, G.; Goya, A.; Lavia, E.

    2015-06-01

    We consider the timelike version of warped anti-de Sitter space (WAdS), which corresponds to the three-dimensional section of the Gödel solution of four-dimensional cosmological Einstein equations. This geometry presents closed timelike curves (CTCs), which are inherited from its four-dimensional embedding. In three dimensions, this type of solution can be supported without matter provided the graviton acquires mass. Here, among the different ways to consistently give mass to the graviton in three dimensions, we consider the parity-even model known as new massive gravity (NMG). In the bulk of timelike WAdS3 space, we introduce defects that, from the three-dimensional point of view, represent spinning massive particlelike objects. For this type of source, we investigate the definition of quasilocal gravitational energy as seen from infinity, far beyond the region where the CTCs appear. We also consider the covariant formalism applied to NMG to compute the mass and the angular momentum of spinning particlelike defects and compare the result with the one obtained by means of the quasilocal stress tensor. We apply these methods to special limits in which the WAdS3 solutions coincide with locally AdS3 and locally AdS2×R spaces. Finally, we make some comments about the asymptotic symmetry algebra of asymptotically WAdS3 spaces in NMG.

  14. Modified Biserial Correlation Coefficients.

    ERIC Educational Resources Information Center

    Kraemer, Helena Chmura

    1981-01-01

    Asymptotic distribution theory of Brogden's form of biserial correlation coefficient is derived and large sample estimates of its standard error obtained. Its relative efficiency to the biserial correlation coefficient is examined. Recommendations for choice of estimator of biserial correlation are presented. (Author/JKS)

  15. QCD Condensates and Holographic Wilson Loops for Asymptotically AdS Spaces

    SciTech Connect

    Quevedo, R. Carcasses; Goity, Jose L.; Trinchero, Roberto C.

    2014-02-01

    The minimization of the Nambu-Goto (NG) action for a surface whose contour defines a circular Wilson loop of radius a placed at a finite value of the coordinate orthogonal to the border is considered. This is done for asymptotically AdS spaces. The condensates of dimension n = 2, 4, 6, 8, and 10 are calculated in terms of the coefficients in the expansion in powers of the radius a of the on-shell subtracted NG action for small a->0. The subtraction employed is such that it presents no conflict with conformal invariance in the AdS case and need not introduce an additional infrared scale for the case of confining geometries. It is shown that the UV value of the gluon condensates is universal in the sense that it only depends on the first coefficients of the difference with the AdS case.

  16. Consistent transport coefficients in astrophysics

    NASA Technical Reports Server (NTRS)

    Fontenla, Juan M.; Rovira, M.; Ferrofontan, C.

    1986-01-01

    A consistent theory for dealing with transport phenomena in stellar atmospheres starting with the kinetic equations and introducing three cases (LTE, partial LTE, and non-LTE) was developed. The consistent hydrodynamical equations were presented for partial-LTE, the transport coefficients defined, and a method shown to calculate them. The method is based on the numerical solution of kinetic equations considering Landau, Boltzmann, and Focker-Planck collision terms. Finally a set of results for the transport coefficients derived for a partially ionized hydrogen gas with radiation was shown, considering ionization and recombination as well as elastic collisions. The results obtained imply major changes is some types of theoretical model calculations and can resolve some important current problems concerning energy and mass balance in the solar atmosphere. It is shown that energy balance in the lower solar transition region can be fully explained by means of radiation losses and conductive flux.

  17. Coefficients of Effective Length.

    ERIC Educational Resources Information Center

    Edwards, Roger H.

    1981-01-01

    Under certain conditions, a validity Coefficient of Effective Length (CEL) can produce highly misleading results. A modified coefficent is suggested for use when empirical studies indicate that underlying assumptions have been violated. (Author/BW)

  18. Atmospheric pressure gas chromatography coupled to quadrupole-time of flight mass spectrometry as a powerful tool for identification of non intentionally added substances in acrylic adhesives used in food packaging materials.

    PubMed

    Canellas, E; Vera, P; Domeño, C; Alfaro, P; Nerín, C

    2012-04-27

    Acrylic adhesives are used to manufacture multilayer laminates that are used in food packaging to form the geometric shape of the package as well as to stick labels on the packages. Once applied on the packaging adhesives can supply potential migrants that could endanger the packaged food. Adhesives are complex matrices where intentionally and non intentionally added substances are present, but the identification of the migrants is required by law. In this study atmospheric pressure gas chromatography coupled to a quadrupole hyphenated to a time of flight mass spectrometer (APGC-MS/Q-TOF) has been explored for identification of unknowns coming from three different acrylic adhesives. The results are compared to those obtained by conventional GC-MS-Q (quadrupole). Sixteen compounds were identified by GC-MS/Q and five of them were confirmed by APGC-MS/Q-TOF as their molecular ions were found. Moreover, additional three new compounds were identified and their structure was elucidated working with the spectra obtained by APGC-MS/Q-TOF. This finding was very relevant as these compounds were biocides suspected to be allergenic and cytotoxic in humans. Migration studies were carried out using Tenax as solid food simulant and the results showed that the three acrylic adhesives tested in this work were safe for being used in food packaging materials since the migration of compounds previously identified was below the limit established in the current legislation.

  19. An AdS Crunch in Supergravity

    NASA Astrophysics Data System (ADS)

    Hertog, Thomas

    2004-12-01

    We review some properties of N=8 gauged supergravity in four dimensions with modified, but AdS invariant boundary conditions on the m2 = -2 scalars. There is a one-parameter class of asymptotic conditions on these fields and the metric components, for which the full AdS symmetry group is preserved. The generators of the asymptotic symmetries are finite, but acquire a contribution from the scalar fields. For a large class of such boundary conditions, we find there exist black holes with scalar hair that are specified by a single conserved charge. Since Schwarschild-AdS is a solution too for all boundary conditions, this provides an example of black hole non-uniqueness. We also show there exist solutions where smooth initial data evolve to a big crunch singularity. This opens up the possibility of using the dual conformal field theory to obtain a fully quantum description of the cosmological singularity, and we report on a preliminary study of this.

  20. Measuring Seebeck Coefficient

    NASA Technical Reports Server (NTRS)

    Snyder, G. Jeffrey (Inventor)

    2015-01-01

    A high temperature Seebeck coefficient measurement apparatus and method with various features to minimize typical sources of errors is described. Common sources of temperature and voltage measurement errors which may impact accurate measurement are identified and reduced. Applying the identified principles, a high temperature Seebeck measurement apparatus and method employing a uniaxial, four-point geometry is described to operate from room temperature up to 1300K. These techniques for non-destructive Seebeck coefficient measurements are simple to operate, and are suitable for bulk samples with a broad range of physical types and shapes.

  1. JKTLD: Limb darkening coefficients

    NASA Astrophysics Data System (ADS)

    Southworth, John

    2015-11-01

    JKTLD outputs theoretically-calculated limb darkening (LD) strengths for equations (LD laws) which predict the amount of LD as a function of the part of the star being observed. The coefficients of these laws are obtained by bilinear interpolation (in effective temperature and surface gravity) in published tables of coefficients calculated from stellar model atmospheres by several researchers. Many observations of stars require the strength of limb darkening (LD) to be estimated, which can be done using theoretical models of stellar atmospheres; JKTLD can help in these circumstances.

  2. = 4 supersymmetric Yang-Mills theories in AdS3

    NASA Astrophysics Data System (ADS)

    Kuzenko, Sergei M.; Tartaglino-Mazzucchelli, Gabriele

    2014-05-01

    For all types of = 4 anti-de Sitter (AdS) supersymmetry in three dimensions, we construct manifestly supersymmetric actions for Abelian vector multiplets and explain how to extend the construction to the non-Abelian case. Manifestly = 4 supersymmetric Yang-Mills (SYM) actions are explicitly given in the cases of (2,2) and critical (4,0) AdS supersymmetries. The = 4 vector multiplets and the corresponding actions are then reduced to (2,0) AdS superspace, in which only = 2 supersymmetry is manifest. Using the off-shell structure of the = 4 vector multiplets, we provide complete = 4 SYM actions in (2,0) AdS superspace for all types of = 4 AdS supersymmetry. In the case of (4,0) AdS supersymmetry, which admits a Euclidean counterpart, the resulting = 2 action contains a Chern-Simons term proportional to q/r, where r is the radius of AdS 3 and q is the R-charge of a chiral scalar superfield. The R-charge is a linear inhomogeneous function of X, an expectation value of the = 4 Cotton superfield. Thus our results explain the mysterious structure of = 4 supersymmetric Yang-Mills theories on S 3 discovered in arXiv:1401.7952. In the case of (3,1) AdS supersymmetry, which has no Euclidean counterpart, the SYM action contains both a Chern-Simons term and a chiral mass-like term. In the case of (2,2) AdS supersymmetry, which admits a Euclidean counterpart, the SYM action has no Chern-Simons and chiral mass-like terms.

  3. Study on the diffusion coefficients for ammonia nitrogen and nitrite and nitrate in PVA gels.

    PubMed

    Yang, Hong; Guan, Qingkun

    2016-10-01

    In order to quantify the proliferation of polyvinyl alcohol (PVA) gels in a matrix and optimize the performance of mass transfer, activated carbon (AC) and CaCO3 were selected as adding materials in this experiment. For the performance of mass transfer, the optimal conditions were analyzed using response surface method (RSM) considering the inter-correlated effects of the amount of AC and CaCO3. For RSM, 13 trials resulted in a partial cubic polynomial equation, which best predicted the amount of residual debris after homogenization. The results of the study show that the effective diffusion coefficient test device can analysis the diffusion rate nitrogen, nitrite and nitrate within the PVA gels quantitatively; adding appropriate amounts of AC and CaCO3 in the biological active filter can improve the performance of mass transfer effectively; the maximum effective diffusion coefficient of nitrogen and nitrite and nitrate in the packing were 1.3637 × 10(-9) and 1.0850 × 10(-9) and 1.0199 × 10(-9) m(2)/s, respectively, at optimal addition amount.

  4. The Massive Wave Equation in Asymptotically AdS Spacetimes

    NASA Astrophysics Data System (ADS)

    Warnick, C. M.

    2013-07-01

    We consider the massive wave equation on asymptotically AdS spaces. We show that the timelike F behaves like a finite timelike boundary, on which one may impose the equivalent of Dirichlet, Neumann or Robin conditions for a range of (negative) mass parameter which includes the conformally coupled case. We demonstrate well posedness for the associated initial-boundary value problems at the H 1 level of regularity. We also prove that higher regularity may be obtained, together with an asymptotic expansion for the field near F. The proofs rely on energy methods, tailored to the modified energy introduced by Breitenlohner and Freedman. We do not assume the spacetime is stationary, nor that the wave equation separates.

  5. Aspects of warped AdS3/CFT2 correspondence

    NASA Astrophysics Data System (ADS)

    Chen, Bin; Zhang, Jia-Ju; Zhang, Jian-Dong; Zhong, De-Liang

    2013-04-01

    In this paper we apply the thermodynamics method to investigate the holographic pictures for the BTZ black hole, the spacelike and the null warped black holes in three-dimensional topologically massive gravity (TMG) and new massive gravity (NMG). Even though there are higher derivative terms in these theories, the thermodynamics method is still effective. It gives consistent results with the ones obtained by using asymptotical symmetry group (ASG) analysis. In doing the ASG analysis we develop a brute-force realization of the Barnich-Brandt-Compere formalism with Mathematica code, which also allows us to calculate the masses and the angular momenta of the black holes. In particular, we propose the warped AdS3/CFT2 correspondence in the new massive gravity, which states that quantum gravity in the warped spacetime could holographically dual to a two-dimensional CFT with {c_R}={c_L}=24 /{Gm{β^2√{{2( {21-4{β^2}} )}}}}.

  6. AdS3: the NHEK generation

    NASA Astrophysics Data System (ADS)

    Bena, Iosif; Heurtier, Lucien; Puhm, Andrea

    2016-05-01

    It was argued in [1] that the five-dimensional near-horizon extremal Kerr (NHEK) geometry can be embedded in String Theory as the infrared region of an infinite family of non-supersymmetric geometries that have D1, D5, momentum and KK monopole charges. We show that there exists a method to embed these geometries into asymptotically- {AdS}_3× {S}^3/{{Z}}_N solutions, and hence to obtain infinite families of flows whose infrared is NHEK. This indicates that the CFT dual to the NHEK geometry is the IR fixed point of a Renormalization Group flow from a known local UV CFT and opens the door to its explicit construction.

  7. Systematics of Coupling Flows in AdS Backgrounds

    SciTech Connect

    Goldberger, Walter D.; Rothstein, Ira Z.

    2003-03-18

    We give an effective field theory derivation, based on the running of Planck brane gauge correlators, of the large logarithms that arise in the predictions for low energy gauge couplings in compactified AdS}_5 backgrounds, including the one-loop effects of bulk scalars, fermions, and gauge bosons. In contrast to the case of charged scalars coupled to Abelian gauge fields that has been considered previously in the literature, the one-loop corrections are not dominated by a single 4D Kaluza-Klein mode. Nevertheless, in the case of gauge field loops, the amplitudes can be reorganized into a leading logarithmic contribution that is identical to the running in 4D non-Abelian gauge theory, and a term which is not logarithmically enhanced and is analogous to a two-loop effect in 4D. In a warped GUT model broken by the Higgs mechanism in the bulk,we show that the matching scale that appears in the large logarithms induced by the non-Abelian gauge fields is m_{XY}^2/k where m_{XY} is the bulk mass of the XY bosons and k is the AdS curvature. This is in contrast to the UV scale in the logarithmic contributions of scalars, which is simply the bulk mass m. Our results are summarized in a set of simple rules that can be applied to compute the leading logarithmic predictions for coupling constant relations within a given warped GUT model. We present results for both bulk Higgs and boundary breaking of the GUT gauge

  8. ``Short'' spinning strings and structure of quantum AdS5×S5 spectrum

    NASA Astrophysics Data System (ADS)

    Beccaria, M.; Giombi, S.; Macorini, G.; Roiban, R.; Tseytlin, A. A.

    2012-09-01

    Using information from the marginality conditions of vertex operators for the AdS5×S5 superstring, we determine the structure of the dependence of the energy of quantum string states on their conserved charges and the string tension ˜λ. We consider states on the leading Regge trajectory in the flat space limit which carry one or two (equal) spins in AdS5 or S5 and an orbital momentum in S5, with Konishi multiplet states being particular cases. We argue that the coefficients in the energy may be found by using a semiclassical expansion. By analyzing the examples of folded spinning strings in AdS5 and S5, as well as three cases of circular two-spin strings, we demonstrate the universality of transcendental (zeta-function) parts of few leading coefficients. We also show the consistency with target space supersymmetry with different states belonging to the same multiplet having the same nontrivial part of the energy. We suggest, in particular, that a rational coefficient (found by Basso for the folded string using Bethe Ansatz considerations and which, in general, is yet to be determined by a direct two-loop string calculation) should, in fact, be universal.

  9. A test apparatus and facility to identify the rotordynamic coefficients of high-speed hydrostatic bearings

    NASA Technical Reports Server (NTRS)

    Childs, Dara; Hale, Keith

    1994-01-01

    A facility and apparatus are described which determine stiffness, damping, and added-mass rotordynamic coefficients plus steady-state operating characteristics of high speed hydrostatic journal bearings. The apparatus has a current top speed of 29,800 rpm with a bearing diameter of 7.62 cm (3 in.). Purified warm water, 55 C (130 F), is used as a test fluid to achieve elevated Reynolds numbers during operation. The test-fluid pump yields a bearing maximum inlet pressure of 6.9 Mpa (1000 psi). Static load on the bearing is independently controlled and measured. Orthogonally mounted external shakers are used to excite the test stator in the direction of, and perpendicular to, the static load. The apparatus can independently calculate all rotordynamic coefficients at a given operating condition.

  10. Experimental investigation of benzoic acid diffusion coefficient in γ-Al2O3 nanofluids at different temperatures

    NASA Astrophysics Data System (ADS)

    Manouchehrian Fard, Manouchehr; Beiki, Hossein

    2016-10-01

    An experimental study was performed to measure benzoic acid diffusion coefficient in water-based γ-Al2O3 nanofluids at different temperatures. Measurements were carried out at 15, 20 and 25 °C. γ-Al2O3 nanoparticles with an average diameter of 10-20 nm were added into de-ionized water as the based fluid. Nanoparticles volume fractions used in the based fluid were 0.025, 0.05, 0.1, 0.2, 0.4 and 0.8 %. Measurements showed that the diffusion coefficients was not changed with nanoparticles concentration and no enhancement was found. Dependence of diffusion coefficients on nanoparticles concentration followed the same trend in all temperatures investigated in this work. Nano stirring and nano-obstacles could be regarded as two reasons for mass diffusivity changes in nanofluids.

  11. Thermodynamics and Stability of Five Dimensional AdS Reissner-Nordstrom Black Hole

    NASA Astrophysics Data System (ADS)

    Saadat, Hassan

    2012-01-01

    In this paper we consider five dimensional AdS Reissner-Nordstrom black hole and calculate thermodynamical variables such as entropy, specific heat and free energy. In that case we can obtain stability conditions of the black hole and fix black hole charge and mass for phase transition.

  12. Closed Timelike Curves in (2+1)-AdS Gravity

    NASA Astrophysics Data System (ADS)

    Valtancoli, P.

    We build the (2+1)-AdS gravity generalization of the Gott time machine using a first-order formalism for solving the scattering of point sources. The two-body dynamics is solved by two invariant masses, whose difference is simply related to the total angular momentum of the system. We show how to build a time machine when at least one of the two invariant masses is no more real but acquires an imaginary part.

  13. Coefficient of restitution for a superelastic collision

    NASA Astrophysics Data System (ADS)

    Cross, Rod

    2017-03-01

    A simple experiment is described where the tip of a metal ruler is used to strike a 50 g mass. Since the ruler is very flexible, the impact duration is much longer than usual, giving the impression that the ruler simply pushes the mass forward at low speed over a long distance. The tip of the ruler remains in contact with the mass throughout the impact. However, the impact is best described as a long duration collision with a coefficient of restitution (COR) greater than zero, despite the fact that the relative speed during and at the end of the collision is zero. If the mass rests on a table and if the ruler strikes the table before striking the mass, then the ruler bends and stores elastic energy. The result is a superelastic collision where the COR is greater than unity.

  14. Stability of charged global AdS4 spacetimes

    NASA Astrophysics Data System (ADS)

    Arias, Raúl; Mas, Javier; Serantes, Alexandre

    2016-09-01

    We study linear and nonlinear stability of asymptotically AdS4 solutions in Einstein-Maxwell-scalar theory. After summarizing the set of static solutions we first examine thermodynamical stability in the grand canonical ensemble and the phase transitions that occur among them. In the second part of the paper we focus on nonlinear stability in the microcanonical ensemble by evolving radial perturbations numerically. We find hints of an instability corner for vanishingly small perturbations of the same kind as the ones present in the uncharged case. Collapses are avoided, instead, if the charge and mass of the perturbations come to close the line of solitons. Finally we examine the soliton solutions. The linear spectrum of normal modes is not resonant and instability turns on at extrema of the mass curve. Linear stability extends to nonlinear stability up to some threshold for the amplitude of the perturbation. Beyond that, the soliton is destroyed and collapses to a hairy black hole. The relative width of this stability band scales down with the charge Q, and does not survive the blow up limit to a planar geometry.

  15. Metastability in bubbling AdS space

    NASA Astrophysics Data System (ADS)

    Massai, Stefano; Pasini, Giulio; Puhm, Andrea

    2015-02-01

    We study the dynamics of probe M5 branes with dissolved M2 charge in bubbling geometries with SO(4) × SO(4) symmetry. These solutions were constructed by Bena-Warner and Lin-Lunin-Maldacena and correspond to the vacua of the maximally supersymmetric mass-deformed M2 brane theory. We find that supersymmetric probe M2 branes polarize into M5 brane shells whose backreaction creates an additional bubble in the geometry. We explicitly check that the supersymmetric polarization potential agrees with the one found within the Polchinski-Strassler approximation. The main result of this paper is that probe M2 branes whose orientation is opposite to the background flux can polarize into metastable M5 brane shells. These decay to a supersymmetric configuration via brane-flux annihilation. Our findings suggest the existence of metastable states in the mass-deformed M2 brane theory.

  16. AD(H)D.

    PubMed

    Harrison, Christopher; Charles, Janice; Britt, Helena

    2008-06-01

    The BEACH program (Bettering the Evaluation and Care of Health) shows that management of attention deficit (hyperactivity) disorder (AD(H)D) was rare in general practice, occurring only six times per 1,000 encounters with children aged 5-17 years, between April 2000 and December 2007. This suggests that general practitioners manage AD(H)D about 46,000 times for this age group nationally each year.

  17. ADS pilot program Plan

    NASA Technical Reports Server (NTRS)

    Clauson, J.; Heuser, J.

    1981-01-01

    The Applications Data Service (ADS) is a system based on an electronic data communications network which will permit scientists to share the data stored in data bases at universities and at government and private installations. It is designed to allow users to readily locate and access high quality, timely data from multiple sources. The ADS Pilot program objectives and the current plans for accomplishing those objectives are described.

  18. Measurement of the iodine partition coefficient

    SciTech Connect

    Furrer, M.; Cripps, R.C.; Gubler, R.

    1985-08-01

    The hydrolysis of iodine is complicated because it involves a number of species that differ considerably in their individual volatilities. Large uncertainties exist in the thermodynamic data of some of the iodine species, especially at temperatures above 25C. Because of this, an experiment was undertaken to measure the partition coefficient under varying physical and chemical conditions. Measurements of P were made for a temperature range of 21 to 113C under well-defined conditions (liquid molar concentration, pH, and redox potential) for inorganic iodine. The experimental results are interpreted with the aid of an analytical model and published thermodynamic data. A good agreement between calculated and measured values was found. The experimental setup allows the determination of very high partition coefficients up to a value of 2.0 X 10W. This is demonstrated by adding cesium-iodide to the fuel pool water of a boiling water reactor.

  19. AdS/CFT beyond the unitarity bound

    NASA Astrophysics Data System (ADS)

    Andrade, Tomás; Marolf, Donald

    2012-01-01

    Scalars in AdS d+1 with squared masses in the Breitenlohner-Freedman window - {d^{{2}}}/{4} ≤slant {m^{{2}}} < - {d^{{2}}}/{4} + {1} (in units with the AdS scale ℓ set to 1) are known to enjoy a variety of boundary conditions. For larger masses {m^{{2}}} > - {d^{{2}}}/{4} + {1} , unitarity bounds in possible dual CFTs suggest that such general boundary conditions should lead to ghosts. We show that this is not always the case as, for conformally-invariant boundary conditions in Poincaré AdS that would naively violate unitarity bounds, the system is generically ghost-free. Conflicts with unitarity bounds are avoided due to the presence of unexpected pure gauge modes and an associated infrared divergence. The expected ghosts appear when the IR divergence is removed either by deforming these boundary conditions or considering global AdS.

  20. Measurement of angular coefficients of drell-yan e(+) e(-) pairs in pp(anti-proton) collisions at square root of center of mass energy of 1.96 tev

    NASA Astrophysics Data System (ADS)

    Bhatia, Sudeep S.

    In this paper we present the status of the measurement of angular distributions of final state electrons in ppbar → gamma*/Z → e+ e- + X events produced in the Z boson mass region at square root of center of mass energy of 1.96 TeV at the Tevatron. For this analysis, we have used the Run IIb2 dataset collected with the Dphi detector. The angular distributions as a function of the transverse momentum of the electron-positron pair are studied, and the Lam-Tung relation, valid only for a spin-1 description of the gluon is investigated. The final result will also describe the details of the production mechanism of Z bosons via quark anti-quark annihilation or quark-gluon Compton scattering.

  1. Effective grid-dependent dispersion coefficient for conservative and reactive transport simulations in heterogeneous porous media

    NASA Astrophysics Data System (ADS)

    Cortinez, J. M.; Valocchi, A. J.; Herrera, P. A.

    2013-12-01

    Because of the finite size of numerical grids, it is very difficult to correctly account for processes that occur at different spatial scales to accurately simulate the migration of conservative and reactive compounds dissolved in groundwater. In one hand, transport processes in heterogeneous porous media are controlled by local-scale dispersion associated to transport processes at the pore-scale. On the other hand, variations of velocity at the continuum- or Darcy-scale produce spreading of the contaminant plume, which is referred to as macro-dispersion. Furthermore, under some conditions both effects interact, so that spreading may enhance the action of local-scale dispersion resulting in higher mixing, dilution and reaction rates. Traditionally, transport processes at different spatial scales have been included in numerical simulations by using a single dispersion coefficient. This approach implicitly assumes that the separate effects of local-dispersion and macro-dispersion can be added and represented by a unique effective dispersion coefficient. Moreover, the selection of the effective dispersion coefficient for numerical simulations usually do not consider the filtering effect of the grid size over the small-scale flow features. We have developed a multi-scale Lagragian numerical method that allows using two different dispersion coefficients to represent local- and macro-scale dispersion. This technique considers fluid particles that carry solute mass and whose locations evolve according to a deterministic component given by the grid-scale velocity and a stochastic component that corresponds to a block-effective macro-dispersion coefficient. Mass transfer between particles due to local-scale dispersion is approximated by a meshless method. We use our model to test under which transport conditions the combined effect of local- and macro-dispersion are additive and can be represented by a single effective dispersion coefficient. We also demonstrate that for

  2. Adding and Deleting Images

    EPA Pesticide Factsheets

    Images are added via the Drupal WebCMS Editor. Once an image is uploaded onto a page, it is available via the Library and your files. You can edit the metadata, delete the image permanently, and/or replace images on the Files tab.

  3. What Value "Value Added"?

    ERIC Educational Resources Information Center

    Richards, Andrew

    2015-01-01

    Two quantitative measures of school performance are currently used, the average points score (APS) at Key Stage 2 and value-added (VA), which measures the rate of academic improvement between Key Stage 1 and 2. These figures are used by parents and the Office for Standards in Education to make judgements and comparisons. However, simple…

  4. ADS in a Nutshell

    NASA Astrophysics Data System (ADS)

    Demleitner, M.; Eichhorn, G.; Grant, C. S.; Accomazzi, A.; Murray, S. S.; Kurtz, M. J.

    1999-05-01

    The bibliographic databases maintained by the NASA Astrophysics Data System are updated approximately biweekly with records gathered from over 125 sources all over the world. Data are either sent to us electronically, retrieved by our staff via semi-automated procedures, or entered in our databases through supervised OCR procedures. PERL scripts are run on the data to convert them from their incoming format to our standard format so that they can be added to the master database at SAO. Once new data has been added, separate index files are created for authors, objects, title words, and text word, allowing these fields to be searched for individually or in combination with each other. During the indexing procedure, discipline-specific knowledge is taken into account through the use of rule-based procedures performing string normalization, context-sensitive word translation, and synonym and stop word replacement. Once the master text and index files have been updated at SAO, an automated procedure mirrors the changes in the database to the ADS mirror site via a secure network connection. The use of a public domain software tool called rsync allows incremental updating of the database files, with significant savings in the amount of data being transferred. In the past year, the ADS Abstract Service databases have grown by approximately 30%, including 50% growth in Physics, 25% growth in Astronomy and 10% growth in the Instrumentation datasets. The ADS Abstract Service now contains over 1.4 million abstracts (475K in Astronomy, 430K in Physics, 510K in Instrumentation, and 3K in Preprints), 175,000 journal abstracts, and 115,000 full text articles. In addition, we provide links to over 40,000 electronic HTML articles at other sites, 20,000 PDF articles, and 10,000 postscript articles, as well as many links to other external data sources.

  5. Hairy black holes and the endpoint of AdS4 charged superradiance

    NASA Astrophysics Data System (ADS)

    Dias, Óscar J. C.; Masachs, Ramon

    2017-02-01

    We construct hairy black hole solutions that merge with the anti-de Sitter (AdS4) Reissner-Nordström black hole at the onset of superradiance. These hairy black holes have, for a given mass and charge, higher entropy than the corresponding AdS4-Reissner-Nordström black hole. Therefore, they are natural candidates for the endpoint of the charged superradiant instability. On the other hand, hairy black holes never dominate the canonical and grand-canonical ensembles. The zero-horizon radius of the hairy black holes is a soliton (i.e. a boson star under a gauge transformation). We construct our solutions perturbatively, for small mass and charge, so that the properties of hairy black holes can be used to testify and compare with the endpoint of initial value simulations. We further discuss the near-horizon scalar condensation instability which is also present in global AdS4-Reissner-Nordström black holes. We highlight the different nature of the near-horizon and superradiant instabilities and that hairy black holes ultimately exist because of the non-linear instability of AdS.

  6. Hall coefficient measurement for nondestructive materials characterization

    NASA Astrophysics Data System (ADS)

    Nagy, Peter B.

    2013-01-01

    Although Hall detectors are widely used for magnetic flux density measurements in numerous electromagnetic NDE applications, measurement of the Hall coefficient of metals and their alloys for NDE purposes has not been successfully attempted before. While other intrinsic electric properties, such as electric conductivity and, to a lesser degree, thermoelectric power, are widely used for NDE, Hall coefficient measurements have never been really considered mainly because the measurements are rather difficult to carry out, especially in high-conductivity materials. In contrast to electric conductivity, the Hall coefficient is influenced mainly by the concentration density of the free charge carriers, i.e., electrons in metals, and not so much by their mobility, therefore it could be a valuable addition to our NDE arsenal. We modified the alternating current potential drop (ACPD) method with square-electrode configuration by adding an external bias magnetic field modulation to measure the Hall coefficient. The presence of such a bias field violates the Reciprocity Theorem unless the sign of the magnetic field is switched between the two measurements, which can be exploited to measure the Hall coefficient in the presence of other variations that would otherwise hide it. This new experimental method was tested on paramagnetic alloys and yielded a ±4% reproducibility that probably could be further improved by additional development efforts. As a first step towards illustrating some of the potential applications of this new technique, we have done reversible applied stress measurements in Al 1100 plates and found the sensitivity of the technique to elastic strain surprisingly high.

  7. Evasion of added isotopic mercury from a northern temperate lake

    USGS Publications Warehouse

    Southworth, G.; Lindberg, S.; Hintelmann, H.; Amyot, M.; Poulain, A.; Bogle, M.; Peterson, M.; Rudd, J.; Harris, R.; Sandilands, K.; Krabbenhoft, D.; Olsen, M.

    2007-01-01

    Isotopically enriched Hg (90% 202Hg) was added to a small lake in Ontario, Canada, at a rate equivalent to approximately threefold the annual direct atmospheric deposition rate that is typical of the northeastern United States. The Hg spike was thoroughly mixed into the epilimnion in nine separate events at two-week intervals throughout the summer growing season for three consecutive years. We measured concentrations of spike and ambient dissolved gaseous Hg (DGM) concentrations in surface water and the rate of volatilization of Hg from the lake on four separate, week-long sampling periods using floating dynamic flux chambers. The relationship between empirically measured rates of spike-Hg evasion were evaluated as functions of DGM concentration, wind velocity, and solar illumination. No individual environmental variable proved to be a strong predictor of the evasion flux. The DGM-normalized flux (expressed as the mass transfer coefficient, k) varied with wind velocity in a manner consistent with existing models of evasion of volatile solutes from natural waters but was higher than model estimates at low wind velocity. The empirical data were used to construct a description of evasion flux as a function of total dissolved Hg, wind, and solar illumination. That model was then applied to data for three summers for the experiment to generate estimates of Hg re-emission from the lake surface to the atmosphere. Based on ratios of spike Hg to ambient Hg in DGM and dissolved total Hg pools, ratios of DGM to total Hg in spike and ambient Hg pools, and flux estimates of spike and ambient Hg, we concluded that the added Hg spike was chemically indistinguishable from the ambient Hg in its behavior. Approximately 45% of Hg added to the lake over the summer was lost via volatilization. ?? 2007 SETAC.

  8. Evasion of added isotopic mercury from a northern temperate lake.

    PubMed

    Southworth, George; Lindberg, Steven; Hintelmann, Holger; Amyot, Marc; Poulain, Alexandre; Bogle, Maryanna; Peterson, Mark; Rudd, John; Harris, R; Sandilands, Kenneth; Krabbenhoft, David; Olsen, Mark

    2007-01-01

    Isotopically enriched Hg (90% 202Hg) was added to a small lake in Ontario, Canada, at a rate equivalent to approximately threefold the annual direct atmospheric deposition rate that is typical of the northeastern United States. The Hg spike was thoroughly mixed into the epilimnion in nine separate events at two-week intervals throughout the summer growing season for three consecutive years. We measured concentrations of spike and ambient dissolved gaseous Hg (DGM) concentrations in surface water and the rate of volatilization of Hg from the lake on four separate, week-long sampling periods using floating dynamic flux chambers. The relationship between empirically measured rates of spike-Hg evasion were evaluated as functions of DGM concentration, wind velocity, and solar illumination. No individual environmental variable proved to be a strong predictor of the evasion flux. The DGM-normalized flux (expressed as the mass transfer coefficient, k) varied with wind velocity in a manner consistent with existing models of evasion of volatile solutes from natural waters but was higher than model estimates at low wind velocity. The empirical data were used to construct a description of evasion flux as a function of total dissolved Hg, wind, and solar illumination. That model was then applied to data for three summers for the experiment to generate estimates of Hg re-emission from the lake surface to the atmosphere. Based on ratios of spike Hg to ambient Hg in DGM and dissolved total Hg pools, ratios of DGM to total Hg in spike and ambient Hg pools, and flux estimates of spike and ambient Hg, we concluded that the added Hg spike was chemically indistinguishable from the ambient Hg in its behavior. Approximately 45% of Hg added to the lake over the summer was lost via volatilization.

  9. Coefficient Alpha: A Reliability Coefficient for the 21st Century?

    ERIC Educational Resources Information Center

    Yang, Yanyun; Green, Samuel B.

    2011-01-01

    Coefficient alpha is almost universally applied to assess reliability of scales in psychology. We argue that researchers should consider alternatives to coefficient alpha. Our preference is for structural equation modeling (SEM) estimates of reliability because they are informative and allow for an empirical evaluation of the assumptions…

  10. First Measurement of the Angular Coefficients of Drell-Yan e⁺e⁻ Pairs in the Z Mass Region from pp̄ Collisions at √s=1.96 TeV

    SciTech Connect

    Aaltonen, T.; Álvarez González, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J. A.; Apresyan, A.; Arisawa, T.; Artikov, A.; Asaadi, J.; Ashmanskas, W.; Auerbach, B.; Aurisano, A.; Azfar, F.; Badgett, W.; Barbaro-Galtieri, A.; Barnes, V. E.; Barnett, B. A.; Barria, P.; Bartos, P.; Bauce, M.; Bauer, G.; Bedeschi, F.; Beecher, D.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Bhatti, A.; Binkley, M.; Bisello, D.; Bizjak, I.; Bland, K. R.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brau, B.; Brigliadori, L.; Brisuda, A.; Bromberg, C.; Brucken, E.; Bucciantonio, M.; Budagov, J.; Budd, H. S.; Budd, S.; Burkett, K.; Busetto, G.; Bussey, P.; Buzatu, A.; Calancha, C.; Camarda, S.; Campanelli, M.; Campbell, M.; Canelli, F.; Canepa, A.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Carron, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cavalli-Sforza, M.; Cerri, A.; Cerrito, L.; Chen, Y. C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Chlebana, F.; Cho, K.; Chokheli, D.; Chou, J. P.; Chung, W. H.; Chung, Y. S.; Ciobanu, C. I.; Ciocci, M. A.; Clark, A.; Compostella, G.; Convery, M. E.; Conway, J.; Corbo, M.; Cordelli, M.; Cox, C. A.; Cox, D. J.; Crescioli, F.; Cuenca Almenar, C.; Cuevas, J.; Culbertson, R.; Dagenhart, D.; d’Ascenzo, N.; Datta, M.; de Barbaro, P.; De Cecco, S.; De Lorenzo, G.; Dell’Orso, M.; Deluca, C.; Demortier, L.; Deng, J.; Deninno, M.; Devoto, F.; d’Errico, M.; Di Canto, A.; Di Ruzza, B.; Dittmann, J. R.; D’Onofrio, M.; Donati, S.; Dong, P.; Dorigo, M.; Dorigo, T.; Ebina, K.; Elagin, A.; Eppig, A.; Erbacher, R.; Errede, D.; Errede, S.; Ershaidat, N.; Eusebi, R.; Fang, H. C.; Farrington, S.; Feindt, M.; Fernandez, J. P.; Ferrazza, C.; Field, R.; Flanagan, G.; Forrest, R.; Frank, M. J.; Franklin, M.; Freeman, J. C.; Funakoshi, Y.; Furic, I.; Gallinaro, M.; Galyardt, J.; Garcia, J. E.; Garfinkel, A. F.; Garosi, P.; Gerberich, H.; Gerchtein, E.; Giagu, S.; Giakoumopoulou, V.; Giannetti, P.; Gibson, K.; Ginsburg, C. M.; Giokaris, N.; Giromini, P.; Giunta, M.; Giurgiu, G.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldin, D.; Goldschmidt, N.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; González, O.; Gorelov, I.; Goshaw, A. T.; Goulianos, K.; Grinstein, S.; Grosso-Pilcher, C.; Group, R. C.; Guimaraes da Costa, J.; Gunay-Unalan, Z.; Haber, C.; Hahn, S. R.; Halkiadakis, E.; Hamaguchi, A.; Han, J. Y.; Happacher, F.; Hara, K.; Hare, D.; Hare, M.; Harr, R. F.; Hatakeyama, K.; Hays, C.; Heck, M.; Heinrich, J.; Herndon, M.; Hewamanage, S.; Hidas, D.; Hocker, A.; Hopkins, W.; Horn, D.; Hou, S.; Hughes, R. E.; Hurwitz, M.; Husemann, U.; Hussain, N.; Hussein, M.; Huston, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E. J.; Jha, M. K.; Jindariani, S.; Johnson, W.; Jones, M.; Joo, K. K.; Jun, S. Y.; Junk, T. R.; Kamon, T.; Karchin, P. E.; Kasmi, A.; Kato, Y.; Ketchum, W.; Keung, J.; Khotilovich, V.; Kilminster, B.; Kim, D. H.; Kim, H. S.; Kim, H. W.; Kim, J. E.; Kim, M. J.; Kim, S. B.; Kim, S. H.; Kim, Y. K.; Kimura, N.; Kirby, M.; Klimenko, S.; Kondo, K.; Kong, D. J.; Konigsberg, J.; Kotwal, A. V.; Kreps, M.; Kroll, J.; Krop, D.; Krumnack, N.; Kruse, M.; Krutelyov, V.; Kuhr, T.; Kurata, M.; Kwang, S.; Laasanen, A. T.; Lami, S.; Lammel, S.; Lancaster, M.; Lander, R. L.; Lannon, K.; Lath, A.; Latino, G.; LeCompte, T.; Lee, E.; Lee, H. S.; Lee, J. S.; Lee, S. W.; Leo, S.; Leone, S.; Lewis, J. D.; Limosani, A.; Lin, C.-J.; Linacre, J.; Lindgren, M.; Lipeles, E.; Lister, A.; Litvintsev, D. O.; Liu, C.; Liu, Q.; Liu, T.; Lockwitz, S.; Lockyer, N. S.; Loginov, A.; Lucchesi, D.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lys, J.; Lysak, R.; Madrak, R.; Maeshima, K.; Makhoul, K.; Maksimovic, P.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Margaroli, F.; Marino, C.; Martínez, M.; Martínez-Ballarín, R.; Mastrandrea, P.; Mathis, M.; Mattson, M. E.; Mazzanti, P.; McFarland, K. S.; McIntyre, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Menzione, A.; Mesropian, C.; Miao, T.; Mietlicki, D.; Mitra, A.; Miyake, H.; Moed, S.; Moggi, N.; Mondragon, M. N.; Moon, C. S.; Moore, R.; Morello, M. J.; Morlock, J.; Movilla Fernandez, P.; Mukherjee, A.; Muller, Th.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Naganoma, J.; Nakano, I.; Napier, A.; Nett, J.; Neu, C.; Neubauer, M. S.; Nielsen, J.; Nodulman, L.; Norniella, O.; Nurse, E.; Oakes, L.; Oh, S. H.; Oh, Y. D.; Oksuzian, I.; Okusawa, T.; Orava, R.; Ortolan, L.; Pagan Griso, S.; Pagliarone, C.; Palencia, E.; Papadimitriou, V.; Paramonov, A. A.; Patrick, J.; Pauletta, G.; Paulini, M.; Paus, C.; Pellett, D. E.; Penzo, A.; Phillips, T. J.; Piacentino, G.; Pianori, E.; Pilot, J.; Pitts, K.; Plager, C.; Pondrom, L.; Potamianos, K.; Poukhov, O.; Prokoshin, F.; Pronko, A.; Ptohos, F.; Pueschel, E.; Punzi, G.; Pursley, J.; Rahaman, A.; Ramakrishnan, V.; Ranjan, N.; Redondo, I.; Renton, P.; Rescigno, M.; Rimondi, F.; Ristori, L.; Robson, A.; Rodrigo, T.; Rodriguez, T.; Rogers, E.; Rolli, S.; Roser, R.; Rossi, M.; Rubbo, F.; Ruffini, F.; Ruiz, A.; Russ, J.; Rusu, V.; Safonov, A.; Sakumoto, W. K.; Sakurai, Y.; Santi, L.; Sartori, L.; Sato, K.; Saveliev, V.; Savoy-Navarro, A.; Schlabach, P.; Schmidt, A.; Schmidt, E. E.; Schmidt, M. P.; Schmitt, M.; Schwarz, T.; Scodellaro, L.; Scribano, A.; Scuri, F.; Sedov, A.; Seidel, S.; Seiya, Y.; Semenov, A.; Sforza, F.; Sfyrla, A.; Shalhout, S. Z.; Shears, T.; Shepard, P. F.; Shimojima, M.; Shiraishi, S.; Shochet, M.; Shreyber, I.; Simonenko, A.; Sinervo, P.; Sissakian, A.; Sliwa, K.; Smith, J. R.; Snider, F. D.; Soha, A.; Somalwar, S.; Sorin, V.; Squillacioti, P.; Stancari, M.; Stanitzki, M.; Denis, R. St.; Stelzer, B.; Stelzer-Chilton, O.; Stentz, D.; Strologas, J.; Strycker, G. L.; Sudo, Y.; Sukhanov, A.; Suslov, I.; Takemasa, K.; Takeuchi, Y.; Tang, J.; Tecchio, M.; Teng, P. K.; Thom, J.; Thome, J.; Thompson, G. A.; Thomson, E.; Ttito-Guzmán, P.; Tkaczyk, S.; Toback, D.; Tokar, S.; Tollefson, K.; Tomura, T.; Tonelli, D.; Torre, S.; Torretta, D.; Totaro, P.; Trovato, M.; Tu, Y.; Ukegawa, F.; Uozumi, S.; Varganov, A.; Vázquez, F.; Velev, G.; Vellidis, C.; Vidal, M.; Vila, I.; Vilar, R.; Vizán, J.; Vogel, M.; Volpi, G.; Wagner, P.; Wagner, R. L.; Wakisaka, T.; Wallny, R.; Wang, S. M.; Warburton, A.; Waters, D.; Weinberger, M.; Wester, W. C.; Whitehouse, B.; Whiteson, D.; Wicklund, A. B.; Wicklund, E.; Wilbur, S.; Wick, F.; Williams, H. H.; Wilson, J. S.; Wilson, P.; Winer, B. L.; Wittich, P.; Wolbers, S.; Wolfe, H.; Wright, T.; Wu, X.; Wu, Z.; Yamamoto, K.; Yamaoka, J.; Yang, T.; Yang, U. K.; Yang, Y. C.; Yao, W.-M.; Yeh, G. P.; Yi, K.; Yoh, J.; Yorita, K.; Yoshida, T.; Yu, G. B.; Yu, I.; Yu, S. S.; Yun, J. C.; Zanetti, A.; Zeng, Y.; Zucchelli, S.

    2011-06-15

    We report on the first measurement of the angular distributions of final state electrons in pp̄→γ*/Z→e⁺e⁻+X events produced in the Z boson mass region at √s=1.96 TeV. The data sample collected by the CDF II detector for this result corresponds to 2.1 fb⁻¹ of integrated luminosity. The angular distributions are studied as a function of the transverse momentum of the electron-positron pair and show good agreement with the Lam-Tung relation, consistent with a spin-1 description of the gluon, and demonstrate that, at high values of the transverse momentum, Z bosons are produced via quark-antiquark annihilation and quark-gluon Compton processes.

  11. First measurement of the angular coefficients of Drell-Yan e(+)e(-) pairs in the Z mass region from pp¯ collisions at √s=1.96 TeV.

    PubMed

    Aaltonen, T; González, B Alvarez; Amerio, S; Amidei, D; Anastassov, A; Annovi, A; Antos, J; Apollinari, G; Appel, J A; Apresyan, A; Arisawa, T; Artikov, A; Asaadi, J; Ashmanskas, W; Auerbach, B; Aurisano, A; Azfar, F; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Barria, P; Bartos, P; Bauce, M; Bauer, G; Bedeschi, F; Beecher, D; Behari, S; Bellettini, G; Bellinger, J; Benjamin, D; Beretvas, A; Bhatti, A; Binkley, M; Bisello, D; Bizjak, I; Bland, K R; Blumenfeld, B; Bocci, A; Bodek, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Brigliadori, L; Brisuda, A; Bromberg, C; Brucken, E; Bucciantonio, M; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Buzatu, A; Calancha, C; Camarda, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carls, B; Carlsmith, D; Carosi, R; Carrillo, S; Carron, S; Casal, B; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavaliere, V; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, K; Chokheli, D; Chou, J P; Chung, W H; Chung, Y S; Ciobanu, C I; Ciocci, M A; Clark, A; Compostella, G; Convery, M E; Conway, J; Corbo, M; Cordelli, M; Cox, C A; Cox, D J; Crescioli, F; Almenar, C Cuenca; Cuevas, J; Culbertson, R; Dagenhart, D; d'Ascenzo, N; Datta, M; de Barbaro, P; De Cecco, S; De Lorenzo, G; Dell'Orso, M; Deluca, C; Demortier, L; Deng, J; Deninno, M; Devoto, F; d'Errico, M; Di Canto, A; Di Ruzza, B; Dittmann, J R; D'Onofrio, M; Donati, S; Dong, P; Dorigo, M; Dorigo, T; Ebina, K; Elagin, A; Eppig, A; Erbacher, R; Errede, D; Errede, S; Ershaidat, N; Eusebi, R; Fang, H C; Farrington, S; Feindt, M; Fernandez, J P; Ferrazza, C; Field, R; Flanagan, G; Forrest, R; Frank, M J; Franklin, M; Freeman, J C; Funakoshi, Y; Furic, I; Gallinaro, M; Galyardt, J; Garcia, J E; Garfinkel, A F; Garosi, P; Gerberich, H; Gerchtein, E; Giagu, S; Giakoumopoulou, V; Giannetti, P; Gibson, K; Ginsburg, C M; Giokaris, N; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldin, D; Goldschmidt, N; Golossanov, A; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Grinstein, S; Grosso-Pilcher, C; Group, R C; da Costa, J Guimaraes; Gunay-Unalan, Z; Haber, C; Hahn, S R; Halkiadakis, E; Hamaguchi, A; Han, J Y; Happacher, F; Hara, K; Hare, D; Hare, M; Harr, R F; Hatakeyama, K; Hays, C; Heck, M; Heinrich, J; Herndon, M; Hewamanage, S; Hidas, D; Hocker, A; Hopkins, W; Horn, D; Hou, S; Hughes, R E; Hurwitz, M; Husemann, U; Hussain, N; Hussein, M; Huston, J; Introzzi, G; Iori, M; Ivanov, A; James, E; Jang, D; Jayatilaka, B; Jeon, E J; Jha, M K; Jindariani, S; Johnson, W; Jones, M; Joo, K K; Jun, S Y; Junk, T R; Kamon, T; Karchin, P E; Kasmi, A; Kato, Y; Ketchum, W; Keung, J; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, H W; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirby, M; Klimenko, S; Kondo, K; Kong, D J; Konigsberg, J; Kotwal, A V; Kreps, M; Kroll, J; Krop, D; Krumnack, N; Kruse, M; Krutelyov, V; Kuhr, T; Kurata, M; Kwang, S; Laasanen, A T; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; LeCompte, T; Lee, E; Lee, H S; Lee, J S; Lee, S W; Leo, S; Leone, S; Lewis, J D; Limosani, A; Lin, C-J; Linacre, J; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, C; Liu, Q; Liu, T; Lockwitz, S; Lockyer, N S; Loginov, A; Lucchesi, D; Lueck, J; Lujan, P; Lukens, P; Lungu, G; Lys, J; Lysak, R; Madrak, R; Maeshima, K; Makhoul, K; Maksimovic, P; Malik, S; Manca, G; Manousakis-Katsikakis, A; Margaroli, F; Marino, C; Martínez, M; Martínez-Ballarín, R; Mastrandrea, P; Mathis, M; Mattson, M E; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzione, A; Mesropian, C; Miao, T; Mietlicki, D; Mitra, A; Miyake, H; Moed, S; Moggi, N; Mondragon, M N; Moon, C S; Moore, R; Morello, M J; Morlock, J; Movilla Fernandez, P; Mukherjee, A; Muller, Th; Murat, P; Mussini, M; Nachtman, J; Nagai, Y; Naganoma, J; Nakano, I; Napier, A; Nett, J; Neu, C; Neubauer, M S; Nielsen, J; Nodulman, L; Norniella, O; Nurse, E; Oakes, L; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Orava, R; Ortolan, L; Griso, S Pagan; Pagliarone, C; Palencia, E; Papadimitriou, V; Paramonov, A A; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Pianori, E; Pilot, J; Pitts, K; Plager, C; Pondrom, L; Potamianos, K; Poukhov, O; Prokoshin, F; Pronko, A; Ptohos, F; Pueschel, E; Punzi, G; Pursley, J; Rahaman, A; Ramakrishnan, V; Ranjan, N; Redondo, I; Renton, P; Rescigno, M; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rodriguez, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rubbo, F; Ruffini, F; Ruiz, A; Russ, J; Rusu, V; Safonov, A; Sakumoto, W K; Sakurai, Y; Santi, L; Sartori, L; Sato, K; Saveliev, V; Savoy-Navarro, A; Schlabach, P; Schmidt, A; Schmidt, E E; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sforza, F; Sfyrla, A; Shalhout, S Z; Shears, T; Shepard, P F; Shimojima, M; Shiraishi, S; Shochet, M; Shreyber, I; Simonenko, A; Sinervo, P; Sissakian, A; Sliwa, K; Smith, J R; Snider, F D; Soha, A; Somalwar, S; Sorin, V; Squillacioti, P; Stancari, M; Stanitzki, M; Denis, R St; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Strycker, G L; Sudo, Y; Sukhanov, A; Suslov, I; Takemasa, K; Takeuchi, Y; Tang, J; Tecchio, M; Teng, P K; Thom, J; Thome, J; Thompson, G A; Thomson, E; Ttito-Guzmán, P; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Totaro, P; Trovato, M; Tu, Y; Ukegawa, F; Uozumi, S; Varganov, A; Vázquez, F; Velev, G; Vellidis, C; Vidal, M; Vila, I; Vilar, R; Vizán, J; Vogel, M; Volpi, G; Wagner, P; Wagner, R L; Wakisaka, T; Wallny, R; Wang, S M; Warburton, A; Waters, D; Weinberger, M; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Wilbur, S; Wick, F; Williams, H H; Wilson, J S; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, H; Wright, T; Wu, X; Wu, Z; Yamamoto, K; Yamaoka, J; Yang, T; Yang, U K; Yang, Y C; Yao, W-M; Yeh, G P; Yi, K; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanetti, A; Zeng, Y; Zucchelli, S

    2011-06-17

    We report on the first measurement of the angular distributions of final state electrons in pp¯ → γ*/Z → e(+)e(-) + X events produced in the Z boson mass region at √s1.96 TeV. The data sample collected by the CDF II detector for this result corresponds to 2.1  fb(-1) of integrated luminosity. The angular distributions are studied as a function of the transverse momentum of the electron-positron pair and show good agreement with the Lam-Tung relation, consistent with a spin-1 description of the gluon, and demonstrate that, at high values of the transverse momentum, Z bosons are produced via quark-antiquark annihilation and quark-gluon Compton processes.

  12. First Measurement of the Angular Coefficients of Drell-Yan e+e- Pairs in the Z Mass Region from pp¯ Collisions at s=1.96TeV

    NASA Astrophysics Data System (ADS)

    Aaltonen, T.; Álvarez González, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J. A.; Apresyan, A.; Arisawa, T.; Artikov, A.; Asaadi, J.; Ashmanskas, W.; Auerbach, B.; Aurisano, A.; Azfar, F.; Badgett, W.; Barbaro-Galtieri, A.; Barnes, V. E.; Barnett, B. A.; Barria, P.; Bartos, P.; Bauce, M.; Bauer, G.; Bedeschi, F.; Beecher, D.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Bhatti, A.; Binkley, M.; Bisello, D.; Bizjak, I.; Bland, K. R.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brau, B.; Brigliadori, L.; Brisuda, A.; Bromberg, C.; Brucken, E.; Bucciantonio, M.; Budagov, J.; Budd, H. S.; Budd, S.; Burkett, K.; Busetto, G.; Bussey, P.; Buzatu, A.; Calancha, C.; Camarda, S.; Campanelli, M.; Campbell, M.; Canelli, F.; Canepa, A.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Carron, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cavalli-Sforza, M.; Cerri, A.; Cerrito, L.; Chen, Y. C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Chlebana, F.; Cho, K.; Chokheli, D.; Chou, J. P.; Chung, W. H.; Chung, Y. S.; Ciobanu, C. I.; Ciocci, M. A.; Clark, A.; Compostella, G.; Convery, M. E.; Conway, J.; Corbo, M.; Cordelli, M.; Cox, C. A.; Cox, D. J.; Crescioli, F.; Cuenca Almenar, C.; Cuevas, J.; Culbertson, R.; Dagenhart, D.; D'Ascenzo, N.; Datta, M.; de Barbaro, P.; de Cecco, S.; de Lorenzo, G.; Dell'Orso, M.; Deluca, C.; Demortier, L.; Deng, J.; Deninno, M.; Devoto, F.; D'Errico, M.; di Canto, A.; di Ruzza, B.; Dittmann, J. R.; D'Onofrio, M.; Donati, S.; Dong, P.; Dorigo, M.; Dorigo, T.; Ebina, K.; Elagin, A.; Eppig, A.; Erbacher, R.; Errede, D.; Errede, S.; Ershaidat, N.; Eusebi, R.; Fang, H. C.; Farrington, S.; Feindt, M.; Fernandez, J. P.; Ferrazza, C.; Field, R.; Flanagan, G.; Forrest, R.; Frank, M. J.; Franklin, M.; Freeman, J. C.; Funakoshi, Y.; Furic, I.; Gallinaro, M.; Galyardt, J.; Garcia, J. E.; Garfinkel, A. F.; Garosi, P.; Gerberich, H.; Gerchtein, E.; Giagu, S.; Giakoumopoulou, V.; Giannetti, P.; Gibson, K.; Ginsburg, C. M.; Giokaris, N.; Giromini, P.; Giunta, M.; Giurgiu, G.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldin, D.; Goldschmidt, N.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; González, O.; Gorelov, I.; Goshaw, A. T.; Goulianos, K.; Grinstein, S.; Grosso-Pilcher, C.; Group, R. C.; Guimaraes da Costa, J.; Gunay-Unalan, Z.; Haber, C.; Hahn, S. R.; Halkiadakis, E.; Hamaguchi, A.; Han, J. Y.; Happacher, F.; Hara, K.; Hare, D.; Hare, M.; Harr, R. F.; Hatakeyama, K.; Hays, C.; Heck, M.; Heinrich, J.; Herndon, M.; Hewamanage, S.; Hidas, D.; Hocker, A.; Hopkins, W.; Horn, D.; Hou, S.; Hughes, R. E.; Hurwitz, M.; Husemann, U.; Hussain, N.; Hussein, M.; Huston, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E. J.; Jha, M. K.; Jindariani, S.; Johnson, W.; Jones, M.; Joo, K. K.; Jun, S. Y.; Junk, T. R.; Kamon, T.; Karchin, P. E.; Kasmi, A.; Kato, Y.; Ketchum, W.; Keung, J.; Khotilovich, V.; Kilminster, B.; Kim, D. H.; Kim, H. S.; Kim, H. W.; Kim, J. E.; Kim, M. J.; Kim, S. B.; Kim, S. H.; Kim, Y. K.; Kimura, N.; Kirby, M.; Klimenko, S.; Kondo, K.; Kong, D. J.; Konigsberg, J.; Kotwal, A. V.; Kreps, M.; Kroll, J.; Krop, D.; Krumnack, N.; Kruse, M.; Krutelyov, V.; Kuhr, T.; Kurata, M.; Kwang, S.; Laasanen, A. T.; Lami, S.; Lammel, S.; Lancaster, M.; Lander, R. L.; Lannon, K.; Lath, A.; Latino, G.; Lecompte, T.; Lee, E.; Lee, H. S.; Lee, J. S.; Lee, S. W.; Leo, S.; Leone, S.; Lewis, J. D.; Limosani, A.; Lin, C.-J.; Linacre, J.; Lindgren, M.; Lipeles, E.; Lister, A.; Litvintsev, D. O.; Liu, C.; Liu, Q.; Liu, T.; Lockwitz, S.; Lockyer, N. S.; Loginov, A.; Lucchesi, D.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lys, J.; Lysak, R.; Madrak, R.; Maeshima, K.; Makhoul, K.; Maksimovic, P.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Margaroli, F.; Marino, C.; Martínez, M.; Martínez-Ballarín, R.; Mastrandrea, P.; Mathis, M.; Mattson, M. E.; Mazzanti, P.; McFarland, K. S.; McIntyre, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Menzione, A.; Mesropian, C.; Miao, T.; Mietlicki, D.; Mitra, A.; Miyake, H.; Moed, S.; Moggi, N.; Mondragon, M. N.; Moon, C. S.; Moore, R.; Morello, M. J.; Morlock, J.; Movilla Fernandez, P.; Mukherjee, A.; Muller, Th.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Naganoma, J.; Nakano, I.; Napier, A.; Nett, J.; Neu, C.; Neubauer, M. S.; Nielsen, J.; Nodulman, L.; Norniella, O.; Nurse, E.; Oakes, L.; Oh, S. H.; Oh, Y. D.; Oksuzian, I.; Okusawa, T.; Orava, R.; Ortolan, L.; Pagan Griso, S.; Pagliarone, C.; Palencia, E.; Papadimitriou, V.; Paramonov, A. A.; Patrick, J.; Pauletta, G.; Paulini, M.; Paus, C.; Pellett, D. E.; Penzo, A.; Phillips, T. J.; Piacentino, G.; Pianori, E.; Pilot, J.; Pitts, K.; Plager, C.; Pondrom, L.; Potamianos, K.; Poukhov, O.; Prokoshin, F.; Pronko, A.; Ptohos, F.; Pueschel, E.; Punzi, G.; Pursley, J.; Rahaman, A.; Ramakrishnan, V.; Ranjan, N.; Redondo, I.; Renton, P.; Rescigno, M.; Rimondi, F.; Ristori, L.; Robson, A.; Rodrigo, T.; Rodriguez, T.; Rogers, E.; Rolli, S.; Roser, R.; Rossi, M.; Rubbo, F.; Ruffini, F.; Ruiz, A.; Russ, J.; Rusu, V.; Safonov, A.; Sakumoto, W. K.; Sakurai, Y.; Santi, L.; Sartori, L.; Sato, K.; Saveliev, V.; Savoy-Navarro, A.; Schlabach, P.; Schmidt, A.; Schmidt, E. E.; Schmidt, M. P.; Schmitt, M.; Schwarz, T.; Scodellaro, L.; Scribano, A.; Scuri, F.; Sedov, A.; Seidel, S.; Seiya, Y.; Semenov, A.; Sforza, F.; Sfyrla, A.; Shalhout, S. Z.; Shears, T.; Shepard, P. F.; Shimojima, M.; Shiraishi, S.; Shochet, M.; Shreyber, I.; Simonenko, A.; Sinervo, P.; Sissakian, A.; Sliwa, K.; Smith, J. R.; Snider, F. D.; Soha, A.; Somalwar, S.; Sorin, V.; Squillacioti, P.; Stancari, M.; Stanitzki, M.; Denis, R. St.; Stelzer, B.; Stelzer-Chilton, O.; Stentz, D.; Strologas, J.; Strycker, G. L.; Sudo, Y.; Sukhanov, A.; Suslov, I.; Takemasa, K.; Takeuchi, Y.; Tang, J.; Tecchio, M.; Teng, P. K.; Thom, J.; Thome, J.; Thompson, G. A.; Thomson, E.; Ttito-Guzmán, P.; Tkaczyk, S.; Toback, D.; Tokar, S.; Tollefson, K.; Tomura, T.; Tonelli, D.; Torre, S.; Torretta, D.; Totaro, P.; Trovato, M.; Tu, Y.; Ukegawa, F.; Uozumi, S.; Varganov, A.; Vázquez, F.; Velev, G.; Vellidis, C.; Vidal, M.; Vila, I.; Vilar, R.; Vizán, J.; Vogel, M.; Volpi, G.; Wagner, P.; Wagner, R. L.; Wakisaka, T.; Wallny, R.; Wang, S. M.; Warburton, A.; Waters, D.; Weinberger, M.; Wester, W. C., III; Whitehouse, B.; Whiteson, D.; Wicklund, A. B.; Wicklund, E.; Wilbur, S.; Wick, F.; Williams, H. H.; Wilson, J. S.; Wilson, P.; Winer, B. L.; Wittich, P.; Wolbers, S.; Wolfe, H.; Wright, T.; Wu, X.; Wu, Z.; Yamamoto, K.; Yamaoka, J.; Yang, T.; Yang, U. K.; Yang, Y. C.; Yao, W.-M.; Yeh, G. P.; Yi, K.; Yoh, J.; Yorita, K.; Yoshida, T.; Yu, G. B.; Yu, I.; Yu, S. S.; Yun, J. C.; Zanetti, A.; Zeng, Y.; Zucchelli, S.

    2011-06-01

    We report on the first measurement of the angular distributions of final state electrons in pp¯→γ*/Z→e+e-+X events produced in the Z boson mass region at s=1.96TeV. The data sample collected by the CDF II detector for this result corresponds to 2.1fb-1 of integrated luminosity. The angular distributions are studied as a function of the transverse momentum of the electron-positron pair and show good agreement with the Lam-Tung relation, consistent with a spin-1 description of the gluon, and demonstrate that, at high values of the transverse momentum, Z bosons are produced via quark-antiquark annihilation and quark-gluon Compton processes.

  13. Calculation and application of combined diffusion coefficients in thermal plasmas

    NASA Astrophysics Data System (ADS)

    Murphy, Anthony B.

    2014-03-01

    The combined diffusion coefficient method is widely used to treat the mixing and demixing of different plasma gases and vapours in thermal plasmas, such as welding arcs and plasma jets. It greatly simplifies the treatment of diffusion for many gas mixtures without sacrificing accuracy. Here, three subjects that are important in the implementation of the combined diffusion coefficient method are considered. First, it is shown that different expressions for the combined diffusion coefficients, arising from different definitions for the stoichiometric coefficients that assign the electrons to the two gases, are equivalent. Second, an approach is presented for calculating certain partial differential terms in the combined temperature and pressure diffusion coefficients that can cause difficulties. Finally, a method for applying the combined diffusion coefficients in computational models, which typically require diffusion to be expressed in terms of mass fraction gradients, is given.

  14. Black hole formation in AdS Einstein-Gauss-Bonnet gravity

    NASA Astrophysics Data System (ADS)

    Deppe, Nils; Kolly, Allison; Frey, Andrew R.; Kunstatter, Gabor

    2016-10-01

    AdS spacetime has been shown numerically to be unstable against a large class of arbitrarily small perturbations. In [1], the authors presented a preliminary study of the effects on stability of changing the local dynamics by adding a Gauss-Bonnet term to the Einstein action. Here we provide further details as well as new results with improved numerical methods. In particular, we elucidate new structure in Choptuik scaling plots. We also provide evidence of chaotic behavior at the transition between immediate horizon formation and horizon formation after the matter pulse reflects from the AdS conformal boundary. Finally, we present data suggesting the formation of naked singularities in spacetimes with ADM mass below the algebraic bound for black hole formation.

  15. Uptake coefficients for biosolids-amended dryland winter wheat

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Biosolids regulations developed in the United States employed risk assessment impacts of trace element additions on plant uptake. The US Environmental Protection Agency adapted the uptake coefficient (ratio of plant concentration to quantity of element added) when developing limitations on selected...

  16. Soft walls in dynamic AdS /QCD and the technidilaton

    NASA Astrophysics Data System (ADS)

    Evans, Nick; Jones, Peter; Scott, Marc

    2015-11-01

    Dynamic AdS /QCD is a modification of AdS /QCD that includes the running of the anomalous dimension of the q ¯q quark bilinear and in which the generation of the constituent quark mass plays the role of an IR wall. The model allows one to move away smoothly from the controlled spectrum of the N =2 super Yang-Mills theory of the D3/probe-D7 system to more QCD-like theories with chiral symmetry breaking. We investigate soft wall behavior in the model that gives Regge trajectories with Mn,s 2˜n ,s . To achieve these behaviors requires the quark's constituent mass to fall peculiarly sharply in the IR so that meson physics is sensitive to renormalization group (RG) scales well below the quark's on-shell mass. Including soft wall behavior in models of walking gauge dynamics breaks the near conformal symmetry which is present above the quark on-shell mass which can generate a large mass for the technidilaton like state. We conclude that the meson spectrum is rather sensitive to the IR decoupling.

  17. Cytoplasmic hydrogen ion diffusion coefficient.

    PubMed Central

    al-Baldawi, N F; Abercrombie, R F

    1992-01-01

    The apparent cytoplasmic proton diffusion coefficient was measured using pH electrodes and samples of cytoplasm extracted from the giant neuron of a marine invertebrate. By suddenly changing the pH at one surface of the sample and recording the relaxation of pH within the sample, an apparent diffusion coefficient of 1.4 +/- 0.5 x 10(-6) cm2/s (N = 7) was measured in the acidic or neutral range of pH (6.0-7.2). This value is approximately 5x lower than the diffusion coefficient of the mobile pH buffers (approximately 8 x 10(-6) cm2/s) and approximately 68x lower than the diffusion coefficient of the hydronium ion (93 x 10(-6) cm2/s). A mobile pH buffer (approximately 15% of the buffering power) and an immobile buffer (approximately 85% of the buffering power) could quantitatively account for the results at acidic or neutral pH. At alkaline pH (8.2-8.6), the apparent proton diffusion coefficient increased to 4.1 +/- 0.8 x 10(-6) cm2/s (N = 7). This larger diffusion coefficient at alkaline pH could be explained quantitatively by the enhanced buffering power of the mobile amino acids. Under the conditions of these experiments, it is unlikely that hydroxide movement influences the apparent hydrogen ion diffusion coefficient. PMID:1617134

  18. Position and mass determination of multiple particles using cantilever based mass sensors

    SciTech Connect

    Dohn, Soeren; Schmid, Silvan; Boisen, Anja; Amiot, Fabien

    2010-07-26

    Resonant microcantilevers are highly sensitive to added masses and have the potential to be used as mass-spectrometers. However, making the detection of individual added masses quantitative requires the position determination for each added mass. We derive expressions relating the position and mass of several added particles to the resonant frequencies of a cantilever, and an identification procedure valid for particles with different masses is proposed. The identification procedure is tested by calculating positions and mass of multiple microparticles with similar mass positioned on individual microcantilevers. Excellent agreement is observed between calculated and measured positions and calculated and theoretical masses.

  19. Supersymmetry of AdS and flat IIB backgrounds

    NASA Astrophysics Data System (ADS)

    Beck, S.; Gutowski, J.; Papadopoulos, G.

    2015-02-01

    We present a systematic description of all warped AdS n × w M 10- n and IIB backgrounds and identify the a priori number of supersymmetries N preserved by these solutions. In particular, we find that the AdS n backgrounds preserve for n ≤ 4 and for 4 < n ≤ 6 supersymmetries and for suitably restricted. In addition under some assumptions required for the applicability of the maximum principle, we demonstrate that the Killing spinors of AdS n backgrounds can be identified with the zero modes of Dirac-like operators on M 10- n establishing a new class of Lichnerowicz type theorems. Furthermore, we adapt some of these results to backgrounds with fluxes by taking the AdS radius to infinity. We find that these backgrounds preserve for 2 < n ≤ 4 and for 4 < n ≤ 7 supersymmetries. We also demonstrate that the Killing spinors of AdS n × w M 10- n do not factorize into Killing spinors on AdS n and Killing spinors on M 10- n .

  20. [Value-Added--Adding Economic Value in the Food Industry].

    ERIC Educational Resources Information Center

    Welch, Mary A., Ed.

    1989-01-01

    This booklet focuses on the economic concept of "value added" to goods and services. A student activity worksheet illustrates how the steps involved in processing food are examples of the concept of value added. The booklet further links food processing to the idea of value added to the Gross National Product (GNP). Discussion questions,…

  1. Wrong Signs in Regression Coefficients

    NASA Technical Reports Server (NTRS)

    McGee, Holly

    1999-01-01

    When using parametric cost estimation, it is important to note the possibility of the regression coefficients having the wrong sign. A wrong sign is defined as a sign on the regression coefficient opposite to the researcher's intuition and experience. Some possible causes for the wrong sign discussed in this paper are a small range of x's, leverage points, missing variables, multicollinearity, and computational error. Additionally, techniques for determining the cause of the wrong sign are given.

  2. Determination of Flux Control Coefficients from transient metabolite concentrations.

    PubMed Central

    Delgado, J; Liao, J C

    1992-01-01

    Flux Control Coefficients have been used in the analysis of metabolic regulation for quantifying the effect of an enzyme on the overall steady-state flux. However, the experimental determination of these coefficients is very time-consuming, involving either determining the individual enzyme kinetics or perturbing the enzyme activity by genetic or other means. We developed a methodology that enables the determination of the Flux Control Coefficients from transient metabolite concentrations without knowing kinetic parameters. The transient states can be generated by changing the incubation conditions or adding the initial substrate. This approach is suitable for investigating metabolic regulation in vivo or multiple enzyme systems in vitro. It is particularly helpful if used in conjunction with n.m.r. measurements. The approach is based on a relationship between transient metabolite concentrations and the Flux Control Coefficients. The methodology has been improved from our previous results, and it is illustrated by three examples with simple pathway topologies. PMID:1554375

  3. Direct Extraction of One-loop Integral Coefficients

    SciTech Connect

    Forde, Darren

    2007-04-16

    We present a general procedure for obtaining the coefficients of the scalar bubble and triangle integral functions of one-loop amplitudes. Coefficients are extracted by considering two-particle and triple unitarity cuts of the corresponding bubble and triangle integral functions. After choosing a specific parameterization of the cut loop momentum we can uniquely identify the coefficients of the desired integral functions simply by examining the behavior of the cut integrand as the unconstrained parameters of the cut loop momentum approach infinity. In this way we can produce compact forms for scalar integral coefficients. Applications of this method are presented for both QCD and electroweak processes, including an alternative form for the recently computed three-mass triangle coefficient in the six-photon amplitude A{sub 6}(1{sup -}, 2{sup +}, 3{sup -}, 4{sup +}, 5{sup -}, 6{sup +}). The direct nature of this extraction procedure allows for a very straightforward automation of the procedure.

  4. AdS3 Solutions of IIB Supergravity

    SciTech Connect

    Kim, Nakwoo

    2005-12-02

    We consider pure D3-brane configurations of IIB string theory which lead to supergravity solutions containing an AdS3 factor. They can provide new examples of AdS3/CFT2 examples on D3-branes whose worldvolume is partially compactified. When the internal 7 dimensional space is non-compact, they are related to fluctuations of higher dimensional AdS/CFT duality examples, thus dual to the BPS operators of D = 4 superconformal field theories. We find that supersymmetry requires the 7 dimensional space is warped Hopf-fibration of (real) 6 dimensional Kahler manifolds.

  5. Action growth for AdS black holes

    NASA Astrophysics Data System (ADS)

    Cai, Rong-Gen; Ruan, Shan-Ming; Wang, Shao-Jiang; Yang, Run-Qiu; Peng, Rong-Hui

    2016-09-01

    Recently a Complexity-Action (CA) duality conjecture has been proposed, which relates the quantum complexity of a holographic boundary state to the action of a Wheeler-DeWitt (WDW) patch in the anti-de Sitter (AdS) bulk. In this paper we further investigate the duality conjecture for stationary AdS black holes and derive some exact results for the growth rate of action within the Wheeler-DeWitt (WDW) patch at late time approximation, which is supposed to be dual to the growth rate of quantum complexity of holographic state. Based on the results from the general D-dimensional Reissner-Nordström (RN)-AdS black hole, rotating/charged Bañados-Teitelboim-Zanelli (BTZ) black hole, Kerr-AdS black hole and charged Gauss-Bonnet-AdS black hole, we present a universal formula for the action growth expressed in terms of some thermodynamical quantities associated with the outer and inner horizons of the AdS black holes. And we leave the conjecture unchanged that the stationary AdS black hole in Einstein gravity is the fastest computer in nature.

  6. Calculating the permeability coefficients of mixed matrix membranes of polydimethylsiloxane and silicalite crystals to various ethanol-water solutions using molecular simulations.

    EPA Science Inventory

    The permeability coefficients of mixed matrix membranes of polydimethylsiloxane (PDMS) and silicalite crystal are taken as the sum of the permeability coefficients of membrane components each weighted by their associated mass fraction. The permeability coefficient of a membrane c...

  7. Value Added in English Schools

    ERIC Educational Resources Information Center

    Ray, Andrew; McCormack, Tanya; Evans, Helen

    2009-01-01

    Value-added indicators are now a central part of school accountability in England, and value-added information is routinely used in school improvement at both the national and the local levels. This article describes the value-added models that are being used in the academic year 2007-8 by schools, parents, school inspectors, and other…

  8. Constructing the AdS dual of a Fermi liquid: AdS black holes with Dirac hair

    NASA Astrophysics Data System (ADS)

    Čubrović, Mihailo; Zaanen, Jan; Schalm, Koenraad

    2011-10-01

    We provide evidence that the holographic dual to a strongly coupled charged Fermi liquid has a non-zero fermion density in the bulk. We show that the pole-strength of the stable quasiparticle characterizing the Fermi surface is encoded in the AdS probability density of a single normalizable fermion wavefunction in AdS. Recalling Migdal's theorem which relates the pole strength to the Fermi-Dirac characteristic discontinuity in the number density at ω F , we conclude that the AdS dual of a Fermi liquid is described by occupied on-shell fermionic modes in AdS. Encoding the occupied levels in the total spatially averaged probability density of the fermion field directly, we show that an AdS Reissner-Nordström black holein a theory with charged fermions has a critical temperature, at which the system undergoes a first-order transition to a black hole with a non-vanishing profile for the bulk fermion field. Thermodynamics and spectral analysis support that the solution with non-zero AdS fermion-profile is the preferred ground state at low temperatures.

  9. Vector condensate and AdS soliton instability induced by a magnetic field

    NASA Astrophysics Data System (ADS)

    Cai, Rong-Gen; Li, Li; Li, Li-Fang; Wu, You

    2014-01-01

    We continue to study the holographic p-wave superconductor model in the Einstein-Maxwell-complex vector field theory with a non-minimal coupling between the complex vector field and the Maxwell field. In this paper we work in the AdS soliton background which describes a conformal field theory in the confined phase and focus on the probe approximation. We find that an applied magnetic field can lead to the condensate of the vector field and the AdS soliton instability. As a result, a vortex lattice structure forms in the spatial directions perpendicular to the applied magnetic field. As a comparison, we also discuss the vector condensate in the Einstein-SU(2) Yang-Mills theory and find that in the setup of the present paper, the Einstein-Maxwell-complex vector field model is a generalization of the SU(2) model in the sense that the vector field has a general mass and gyromagnetic ratio.

  10. Partition functions with spin in AdS2 via quasinormal mode methods

    NASA Astrophysics Data System (ADS)

    Keeler, Cynthia; Lisbão, Pedro; Ng, Gim Seng

    2016-10-01

    We extend the results of [1], computing one loop partition functions for massive fields with spin half in AdS2 using the quasinormal mode method proposed by Denef, Hartnoll, and Sachdev [2]. We find the finite representations of SO(2, 1) for spin zero and spin half, consisting of a highest weight state | h> and descendants with non-unitary values of h. These finite representations capture the poles and zeroes of the one loop determinants. Together with the asymptotic behavior of the partition functions (which can be easily computed using a large mass heat kernel expansion), these are sufficient to determine the full answer for the one loop determinants. We also discuss extensions to higher dimensional AdS2 n and higher spins.

  11. Massive quiver matrix models for massive charged particles in AdS

    SciTech Connect

    Asplund, Curtis T.; Denef, Frederik; Dzienkowski, Eric

    2016-01-11

    Here, we present a new class of N = 4 supersymmetric quiver matrix models and argue that it describes the stringy low-energy dynamics of internally wrapped D-branes in four-dimensional anti-de Sitter (AdS) flux compactifications. The Lagrangians of these models differ from previously studied quiver matrix models by the presence of mass terms, associated with the AdS gravitational potential, as well as additional terms dictated by supersymmetry. These give rise to dynamical phenomena typically associated with the presence of fluxes, such as fuzzy membranes, internal cyclotron motion and the appearance of confining strings. We also show how these models can be obtained by dimensional reduction of four-dimensional supersymmetric quiver gauge theories on a three-sphere.

  12. Massive quiver matrix models for massive charged particles in AdS

    DOE PAGES

    Asplund, Curtis T.; Denef, Frederik; Dzienkowski, Eric

    2016-01-11

    Here, we present a new class of N = 4 supersymmetric quiver matrix models and argue that it describes the stringy low-energy dynamics of internally wrapped D-branes in four-dimensional anti-de Sitter (AdS) flux compactifications. The Lagrangians of these models differ from previously studied quiver matrix models by the presence of mass terms, associated with the AdS gravitational potential, as well as additional terms dictated by supersymmetry. These give rise to dynamical phenomena typically associated with the presence of fluxes, such as fuzzy membranes, internal cyclotron motion and the appearance of confining strings. We also show how these models can bemore » obtained by dimensional reduction of four-dimensional supersymmetric quiver gauge theories on a three-sphere.« less

  13. Factors influencing the stream-aquifer flow exchange coefficient.

    PubMed

    Morel-Seytoux, Hubert J; Mehl, Steffen; Morgado, Kyle

    2014-01-01

    Knowledge of river gain from or loss to a hydraulically connected water table aquifer is crucial in issues of water rights and also when attempting to optimize conjunctive use of surface and ground waters. Typically in groundwater models this exchange flow is related to a difference in head between the river and some point in the aquifer, through a "coefficient." This coefficient has been defined differently as well as the location for the head in the aquifer. This paper proposes a new coefficient, analytically derived, and a specific location for the point where the aquifer head is used in the difference. The dimensionless part of the coefficient is referred to as the SAFE (stream-aquifer flow exchange) dimensionless conductance. The paper investigates the factors that influence the value of this new conductance. Among these factors are (1) the wetted perimeter of the cross-section, (2) the degree of penetration of the cross-section, and (3) the shape of the cross-section. The study shows that these factors just listed are indeed ordered in their respective level of importance. In addition the study verifies that the analytical correct value of the coefficient is matched by finite difference simulation only if the grid system is sufficiently fine. Thus the use of the analytical value of the coefficient is an accurate and efficient alternative to ad hoc estimates for the coefficient typically used in finite difference and finite element methods.

  14. Estimating biokinetic coefficients in the PACT™ system.

    PubMed

    Shen, Zhiyao; Arbuckle, Wm Brian

    2016-02-01

    When powdered activated carbon (PAC) is continuously added to the aeration tank of an activated sludge reactor, the modification is called a PACT™ process (for powdered activated carbon treatment). The PAC provides many benefits, but complicates the determination of biological phenomena. Determination of bio-oxidation kinetics in a PACT system is a key to fully understanding enhanced biological mechanisms resulting from PAC addition. A model is developed to account for the main mechanisms involved in the PACT system -- adsorption, air stripping and bio-oxidation. The model enables the investigation of biokinetic information, including possible synergistic effects. Six parallel reactors were used to treat a synthetic waste; three activated sludge and three PACT. The PACT reactors provided significantly reduced effluent TOC (total organic carbon). Biokinetic coefficients were obtained from steady-state data using averaged reactor data and by using all data (22 points for each reactor). As expected, the PACT reactors resulted in a substantial reduction in the effluent concentration of non-biodegradable total organic carbon. The Monod equation's half-saturation coefficient (Ks) was reduced significantly in the PACT reactors, resulting in higher growth rates at lower concentrations. The maximum specific substrate utilization (qm) rate was also reduced about 25% using the averaged data and remained unchanged using all the data. The substrate utilization values are affected by errors in biomass determination and more research is needed to accurately determine biomass.

  15. Robustness of the I4 symmetry energy coefficient

    NASA Astrophysics Data System (ADS)

    Jiang, H.; Cheng, Y. Y.; Wang, N.; Chen, Lie-Wen; Zhao, Y. M.; Arima, A.

    2016-12-01

    In this paper we investigate the I4 symmetry energy coefficient [I =(N -Z )/A ] extracted from a few popular mass models, and their corresponding databases improved, respectively, by the radial basis function (RBF) approach and the RBF with odd-even corrections. Our results show that the linear correlation between our resultant I4 symmetry energy coefficients (denoted by c4(V )) and the corresponding root-mean-square deviations from experimental masses of these theoretical databases is very robust. Interestingly, the extrapolated values of c4(V ) using the above three versions of databases are consistent with each other.

  16. AdS-Carroll branes

    NASA Astrophysics Data System (ADS)

    Clark, T. E.; ter Veldhuis, T.

    2016-11-01

    Coset methods are used to determine the action of a co-dimension one brane (domain wall) embedded in (d + 1)-dimensional AdS space in the Carroll limit in which the speed of light goes to zero. The action is invariant under the non-linearly realized symmetries of the AdS-Carroll spacetime. The Nambu-Goldstone field exhibits a static spatial distribution for the brane with a time varying momentum density related to the brane's spatial shape as well as the AdS-C geometry. The AdS-C vector field dual theory is obtained.

  17. ADS Based on Linear Accelerators

    NASA Astrophysics Data System (ADS)

    Pan, Weimin; Dai, Jianping

    An accelerator-driven system (ADS), which combines a particle accelerator with a subcritical core, is commonly regarded as a promising device for the transmutation of nuclear waste, as well as a potential scheme for thorium-based energy production. So far the predominant choice of the accelerator for ADS is a superconducting linear accelerator (linac). This article gives a brief overview of ADS based on linacs, including the motivation, principle, challenges and research activities around the world. The status and future plan of the Chinease ADS (C-ADS) project will be highlighted and discussed in depth as an example.

  18. AdS spacetimes from wrapped D3-branes

    NASA Astrophysics Data System (ADS)

    Gauntlett, Jerome P.; MacConamhna, Oisín A. P.

    2007-12-01

    We derive a geometrical characterization of a large class of AdS3 and AdS2 supersymmetric spacetimes in type IIB supergravity with non-vanishing five-form flux using G-structures. These are obtained as special cases of a class of supersymmetric spacetimes with an {{\\bb R}}^{1,1} or {{\\bb R}} (time) factor that are associated with D3 branes wrapping calibrated two or three cycles, respectively, in manifolds with SU(2), SU(3), SU(4) and G2 holonomy. We show how two explicit AdS solutions, previously constructed in gauged supergravity, satisfy our more general G-structure conditions. For each explicit solution, we also derive a special holonomy metric which, although singular, has an appropriate calibrated cycle. After analytic continuation, some of the classes of AdS spacetimes give rise to known classes of BPS bubble solutions with {{\\bb R}}\\times {\\it SO}(4)\\times {\\it SO}(4), {{\\bb R}}\\times {\\it SO}(4)\\times U(1) and {{\\bb R}}\\times {\\it SO}(4) symmetry. These have 1/2, 1/4 and 1/8 supersymmetry, respectively. We present a new class of 1/8 BPS geometries with {{\\bb R}}\\times {\\it SU}(2) symmetry, obtained by analytic continuation of the class of AdS spacetimes associated with D3-brane wrapped on associative three cycles.

  19. Orthogonality of spherical harmonic coefficients

    NASA Technical Reports Server (NTRS)

    Mcleod, M. G.

    1980-01-01

    Orthogonality relations are obtained for the spherical harmonic coefficients of functions defined on the surface of a sphere. Following a brief discussion of the orthogonality of Fourier series coefficients, consideration is given to the values averaged over all orientations of the coordinate system of the spherical harmonic coefficients of a function defined on the surface of a sphere that can be expressed in terms of Legendre polynomials for the special case where the function is the sum of two delta functions located at two different points on the sphere, and for the case of an essentially arbitrary function. It is noted that the orthogonality relations derived have found applications in statistical studies of the geomagnetic field.

  20. Transport coefficients of gluonic fluid

    SciTech Connect

    Das, Santosh K.; Alam, Jan-e

    2011-06-01

    The shear ({eta}) and bulk ({zeta}) viscous coefficients have been evaluated for a gluonic fluid. The elastic, gg{yields}gg and the inelastic, number nonconserving, gg{yields}ggg processes have been considered as the dominant perturbative processes in evaluating the viscous coefficients to entropy density (s) ratios. Recently the processes: gg{yields}ggg has been revisited and a correction to the widely used Gunion-Bertsch (GB) formula has been obtained. The {eta} and {zeta} have been evaluated for gluonic fluid with the formula recently derived. At large {alpha}{sub s} the value of {eta}/s approaches its lower bound, {approx}1/4{pi}.

  1. Seebeck coefficient of one electron

    SciTech Connect

    Durrani, Zahid A. K.

    2014-03-07

    The Seebeck coefficient of one electron, driven thermally into a semiconductor single-electron box, is investigated theoretically. With a finite temperature difference ΔT between the source and charging island, a single electron can charge the island in equilibrium, directly generating a Seebeck effect. Seebeck coefficients for small and finite ΔT are calculated and a thermally driven Coulomb staircase is predicted. Single-electron Seebeck oscillations occur with increasing ΔT, as one electron at a time charges the box. A method is proposed for experimental verification of these effects.

  2. Searching for AdS3 waves and asymptotically Lifshitz black holes in R3 new massive gravity

    NASA Astrophysics Data System (ADS)

    Anastasiou, Giorgos G.; Setare, M. R.; Vagenas, Elias C.

    2013-09-01

    In this paper, we consider the structure of the AdS3 vacua in R3 expansion of new massive gravity (R3-NMG). We obtain the degeneracies of the AdS3 vacua at several points of the parametric space. Additionally, following a specific analysis we show that AdS3 wave solutions are present. Using these wave solutions, we single out two special points of the parametric space for which logarithmic terms appear in the solutions. The first one is a point at which the effective mass of the wave profile, which is interpreted as a scalar mode, completely saturates the Breitenlohner-Freedman bound of the AdS3 space in which the wave is propagating. The second special point is a point at which the central charge of the theory vanishes. Furthermore, we investigate the possibility of asymptotically Lifshitz black hole solutions to be present in the three-dimensional R3-NMG. We derive analytically the Lifshitz vacua considering specific relations between the mass parameters of R3-NMG. A certain polynomial equation arises at the first special point where solutions with logarithmic falloff in the AdS3 space appear. Solving this polynomial equation, we obtain the values of the dynamical exponent z which correspond to possible asymptotically Lifshitz black hole solutions. However, it is shown that asymptotically Lifshitz black hole solutions do not exist in the three-dimensional R3-NMG for a specific ansatz of the black hole metric.

  3. Revisiting the thermodynamic relations in AdS /CMT models

    NASA Astrophysics Data System (ADS)

    Hyun, Seungjoon; Park, Sang-A.; Yi, Sang-Heon

    2017-03-01

    Motivated by the recent unified approach to the Smarr-like relation of anti-de Sitter (AdS) planar black holes in conjunction with the quasilocal formalism on conserved charges, we revisit the quantum statistical and thermodynamic relations of hairy AdS planar black holes. By extending the previous results, we identify the hairy contribution in the bulk and show that the holographic computation can be improved so that it is consistent with the bulk computation. We argue that the first law can be retained in its universal form and that the relation between the on-shell renormalized Euclidean action and its free energy interpretation in gravity may also be undeformed even with the hairy contribution in hairy AdS black holes.

  4. Entanglement entropy for free scalar fields in AdS

    NASA Astrophysics Data System (ADS)

    Sugishita, Sotaro

    2016-09-01

    We compute entanglement entropy for free massive scalar fields in anti-de Sitter (AdS) space. The entangling surface is a minimal surface whose boundary is a sphere at the boundary of AdS. The entropy can be evaluated from the thermal free energy of the fields on a topological black hole by using the replica method. In odd-dimensional AdS, exact expressions of the Rényi entropy S n are obtained for arbitrary n. We also evaluate 1-loop corrections coming from the scalar fields to holographic entanglement entropy. Applying the results, we compute the leading difference of entanglement entropy between two holographic CFTs related by a renormalization group flow triggered by a double trace deformation. The difference is proportional to the shift of a central charge under the flow.

  5. Note on a Confidence Interval for the Squared Semipartial Correlation Coefficient

    ERIC Educational Resources Information Center

    Algina, James; Keselman, Harvey J.; Penfield, Randall J.

    2008-01-01

    A squared semipartial correlation coefficient ([Delta]R[superscript 2]) is the increase in the squared multiple correlation coefficient that occurs when a predictor is added to a multiple regression model. Prior research has shown that coverage probability for a confidence interval constructed by using a modified percentile bootstrap method with…

  6. Comparing Regression Coefficients between Nested Linear Models for Clustered Data with Generalized Estimating Equations

    ERIC Educational Resources Information Center

    Yan, Jun; Aseltine, Robert H., Jr.; Harel, Ofer

    2013-01-01

    Comparing regression coefficients between models when one model is nested within another is of great practical interest when two explanations of a given phenomenon are specified as linear models. The statistical problem is whether the coefficients associated with a given set of covariates change significantly when other covariates are added into…

  7. Diffusion and chaos from near AdS2 horizons

    NASA Astrophysics Data System (ADS)

    Blake, Mike; Donos, Aristomenis

    2017-02-01

    We calculate the thermal diffusivity D = κ/c ρ and butterfly velocity v B in holographic models that flow to AdS2 × R d fixed points in the infra-red. We show that both these quantities are governed by the same irrelevant deformation of AdS2 and hence establish a simple relationship between them. When this deformation corresponds to a universal dilaton mode of dimension Δ = 2 then this relationship is always given by D = v B 2 /(2 πT).

  8. Tables of the coefficients A

    NASA Technical Reports Server (NTRS)

    Chandra, N.

    1974-01-01

    Numerical coefficients required to express the angular distribution for the rotationally elastic or inelastic scattering of electrons from a diatomic molecule were tabulated for the case of nitrogen and in the energy range from 0.20 eV to 10.0 eV. Five different rotational states are considered.

  9. Identities for generalized hypergeometric coefficients

    SciTech Connect

    Biedenharn, L.C.; Louck, J.D.

    1991-01-01

    Generalizations of hypergeometric functions to arbitrarily many symmetric variables are discussed, along with their associated hypergeometric coefficients, and the setting within which these generalizations arose. Identities generalizing the Euler identity for {sub 2}F{sub 1}, the Saalschuetz identity, and two generalizations of the {sub 4}F{sub 3} Bailey identity, among others, are given. 16 refs.

  10. Integer Solutions of Binomial Coefficients

    ERIC Educational Resources Information Center

    Gilbertson, Nicholas J.

    2016-01-01

    A good formula is like a good story, rich in description, powerful in communication, and eye-opening to readers. The formula presented in this article for determining the coefficients of the binomial expansion of (x + y)n is one such "good read." The beauty of this formula is in its simplicity--both describing a quantitative situation…

  11. Adding Insult to Imagery? Art Education and Censorship

    ERIC Educational Resources Information Center

    Sweeny, Robert W.

    2007-01-01

    The "Adding Insult to Imagery? Artistic Responses to Censorship and Mass-Media" exhibition opened in January 16, 2006, Kipp Gallery on the Indiana University of Pennsylvania campus. Eleven gallery-based works, 9 videos, and 10 web-based artworks comprised the show; each dealt with the relationship between censorship and mass mediated…

  12. Isospin diffusion in thermal AdS/CFT correspondence with flavor

    SciTech Connect

    Erdmenger, Johanna; Kaminski, Matthias; Rust, Felix

    2007-08-15

    We study the gauge/gravity dual of a finite temperature field theory at finite isospin chemical potential by considering a probe of two coincident D7-branes embedded in the AdS-Schwarzschild black hole background. The isospin chemical potential is obtained by giving a vacuum expectation value to the time component of the non-Abelian gauge field on the brane. The fluctuations of the non-Abelian gauge field on the brane are dual to the SU(2) flavor current in the field theory. For the embedding corresponding to vanishing quark mass, we calculate all Green functions corresponding to the components of the flavor current correlator. We discuss the physical properties of these Green functions, which go beyond linear response theory. In particular, we show that the isospin chemical potential leads to a frequency-dependent isospin diffusion coefficient.

  13. Mystery cloud of AD 536

    NASA Technical Reports Server (NTRS)

    Stothers, R. B.

    1984-01-01

    The possible cause of the densest and most persistent dry fog on record, which was observed in Europe and the Middle East during AD 536 and 537, is discussed. The fog's long duration toward the south and the high sulfuric acid signal detected in Greenland in ice cores dated around AD 540 support the theory that the fog was due to the explosion of the Rabaul volcano, the occurrence of which has been dated at about AD 540 by the radiocarbon method.

  14. Entropy of near-extremal black holes in AdS5

    SciTech Connect

    Simon, Joan; Balasubramanian, Vijay; de Boer, Jan; Jejjala, Vishnu; Simon, Joan

    2007-07-24

    We construct the microstates of near-extremal black holes in AdS_5 x S5 as gases of defects distributed in heavy BPS operators in the dual SU(N) Yang-Mills theory. These defects describe open strings on spherical D3-branes in the S5, and we show that they dominate the entropy by directly enumerating them and comparing the results with a partition sum calculation. We display new decoupling limits in which the field theory of the lightest open strings on the D-branes becomes dual to a near-horizon region of the black hole geometry. In the single-charge black hole we find evidence for an infrared duality between SU(N) Yang-Mills theories that exchanges the rank of the gauge group with an R-charge. In the two-charge case (where pairs of branes intersect on a line), the decoupled geometry includes an AdS_3 factor with a two-dimensional CFT dual. The degeneracy in this CFT accounts for the black hole entropy. In the three-charge case (where triples of branes intersect at a point), the decoupled geometry contains an AdS_2 factor. Below a certain critical mass, the two-charge system displays solutions with naked timelike singularities even though they do not violate a BPS bound. We suggest a string theoretic resolution of these singularities.

  15. Entanglement temperature and perturbed AdS3 geometry

    NASA Astrophysics Data System (ADS)

    Levine, G. C.; Caravan, B.

    2016-06-01

    Generalizing the first law of thermodynamics, the increase in entropy density δ S (x ) of a conformal field theory (CFT) is proportional to the increase in energy density, δ E (x ) , of a subsystem divided by a spatially dependent entanglement temperature, TE(x ) , a fixed parameter determined by the geometry of the subsystem, crossing over to thermodynamic temperature at high temperatures. In this paper we derive a generalization of the thermodynamic Clausius relation, showing that deformations of the CFT by marginal operators are associated with spatial temperature variations, δ TE(x ) , and spatial energy correlations play the role of specific heat. Using AdS/CFT duality we develop a relationship between a perturbation in the local entanglement temperature of the CFT and the perturbation of the bulk AdS metric. In two dimensions, we demonstrate a method through which direct diagonalizations of the boundary quantum theory may be used to construct geometric perturbations of AdS3 .

  16. AdS5 backgrounds with 24 supersymmetries

    NASA Astrophysics Data System (ADS)

    Beck, S.; Gutowski, J.; Papadopoulos, G.

    2016-06-01

    We prove a non-existence theorem for smooth AdS 5 solutions with connected, compact without boundary internal space that preserve strictly 24 supersymmetries. In particular, we show that D = 11 supergravity does not admit such solutions, and that all such solutions of IIB supergravity are locally isometric to the AdS 5 × S 5 maximally supersymmetric background. Furthermore, we prove that (massive) IIA supergravity also does not admit such solutions, provided that the homogeneity conjecture for massive IIA supergravity is valid. In the context of AdS/CFT these results imply that if gravitational duals for strictly mathcal{N}=3 superconformal theories in 4-dimensions exist, they are either singular or their internal spaces are not compact.

  17. Temperature dependence of the Soret coefficient of ionic colloids

    NASA Astrophysics Data System (ADS)

    Sehnem, A. L.; Figueiredo Neto, A. M.; Aquino, R.; Campos, A. F. C.; Tourinho, F. A.; Depeyrot, J.

    2015-10-01

    The temperature dependence of the Soret coefficient ST(T ) in electrostatically charged magnetic colloids is investigated. Two different ferrofluids, with different particles' mean dimensions, are studied. In both cases we obtain a thermophilic behavior of the Soret effect. The temperature dependence of the Soret coefficient is described assuming that the nanoparticles migrate along the ionic thermoelectric field created by the thermal gradient. A model based on the contributions from the thermoelectrophoresis and variation of the double-layer energy, without fitting parameters, is used to describe the experimental results of the colloid with the bigger particles. To do so, independent measurements of the ζ potential, mass diffusion coefficient, and Seebeck coefficient are performed. The agreement of the theory and the experimental results is rather good. In the case of the ferrofluid with smaller particles, it is not possible to get experimentally reliable values of the ζ potential and the model described is used to evaluate this parameter and its temperature dependence.

  18. MASS SPECTROMETRY

    DOEpatents

    Friedman, L.

    1962-01-01

    method is described for operating a mass spectrometer to improve its resolution qualities and to extend its period of use substantially between cleanings. In this method, a small amount of a beta emitting gas such as hydrogen titride or carbon-14 methane is added to the sample being supplied to the spectrometer for investigation. The additive establishes leakage paths on the surface of the non-conducting film accumulating within the vacuum chamber of the spectrometer, thereby reducing the effect of an accumulated static charge on the electrostatic and magnetic fields established within the instrument. (AEC)

  19. Holographic cusped Wilson loops in q-deformed AdS5 × S5 spacetime

    NASA Astrophysics Data System (ADS)

    Bai, Nan; Chen, Hui-Huang; Wu, Jun-Bao

    2015-10-01

    In this paper, a minimal surface in q-deformed AdS5×S5 with a cusp boundary is studied in detail. This minimal surface is dual to a cusped Wilson loop in dual field theory. We find that the area of the minimal surface has both logarithmic squared divergence and logarithmic divergence. The logarithmic squared divergence cannot be removed by either Legendre transformation or the usual geometric subtraction. We further make an analytic continuation to the Minkowski signature, taking the limit such that the two edges of the cusp become light-like, and extract the anomalous dimension from the coefficient of the logarithmic divergence. This anomalous dimension goes back smoothly to the results in the undeformed case when we take the limit that the deformation parameter goes to zero. Supported by National Natural Science Foundation of China (11105154, 11222549, 11275207), K. C. Wong Education Foundation and Youth Innovation Promotion Association of CAS

  20. Ozone absorption coefficients' role in Dobson instrument ozone measurement accuracy

    NASA Astrophysics Data System (ADS)

    Basher, R. E.

    1982-11-01

    The differences of 10% or more between the laboratory measurements of UV absorption coefficients by different investigators indicate accuracies that are quite inadequate for current needs in the measurement of atmospheric ozone. The standard band-integrated set of coefficients now used with the Dobson instrument are mutually consistent to about 2%, but their absolute accuracy is still in question. The accurate calculation of band-integrated coefficients must take account of their dependence on source spectral irradiance, atmospheric spectral transmittance, mean ozone temperature, and instrument spectral transmittance. A careful examination shows that Komhyr's (1980) case for an error of about +5% in the standard Dobson AD ozone estimation is subject to large uncertainties and certain lacks of independence. The obvious solution to this accuracy problem lies in better laboratory measurements of ozone absorption.

  1. Transport coefficients of quantum plasmas

    SciTech Connect

    Bennaceur, D.; Khalfaoui, A.H. )

    1993-09-01

    Transport coefficients of fully ionized plasmas with a weakly coupled, completely degenerate electron gas and classical ions with a wide range of coupling strength are expressed within the Bloch transport equation. Using the Kohler variational principle the collision integral of the quantum Boltzmann equation is derived, which accounts for quantum effects through collective plasma oscillations. The physical implications of the results are investigated through comparisons with other theories. For practical applications, electrical and thermal conductivities are derived in simple analytical formulas. The relation between these two transport coefficients is expressed in an explicit form, giving a generalized Wiedemann-Franz law, where the Lorentz ratio is a dependent function of the coupling parameter and the degree of degeneracy of the plasma.

  2. High temperature Seebeck coefficient metrology

    SciTech Connect

    Martin, J.; Tritt, T.; Uher, C.

    2010-12-15

    We present an overview of the challenges and practices of thermoelectric metrology on bulk materials at high temperature (300 to 1300 K). The Seebeck coefficient, when combined with thermal and electrical conductivity, is an essential property measurement for evaluating the potential performance of novel thermoelectric materials. However, there is some question as to which measurement technique(s) provides the most accurate determination of the Seebeck coefficient at high temperature. This has led to the implementation of nonideal practices that have further complicated the confirmation of reported high ZT materials. To ensure meaningful interlaboratory comparison of data, thermoelectric measurements must be reliable, accurate, and consistent. This article will summarize and compare the relevant measurement techniques and apparatus designs required to effectively manage uncertainty, while also providing a reference resource of previous advances in high temperature thermoelectric metrology.

  3. Study of Dispersion Coefficient Channel

    NASA Astrophysics Data System (ADS)

    Akiyama, K. R.; Bressan, C. K.; Pires, M. S. G.; Canno, L. M.; Ribeiro, L. C. L. J.

    2016-08-01

    The issue of water pollution has worsened in recent times due to releases, intentional or not, of pollutants in natural water bodies. This causes several studies about the distribution of pollutants are carried out. The water quality models have been developed and widely used today as a preventative tool, ie to try to predict what will be the concentration distribution of constituent along a body of water in spatial and temporal scale. To understand and use such models, it is necessary to know some concepts of hydraulic high on their application, including the longitudinal dispersion coefficient. This study aims to conduct a theoretical and experimental study of the channel dispersion coefficient, yielding more information about their direct determination in the literature.

  4. Portable vapor diffusion coefficient meter

    DOEpatents

    Ho, Clifford K.

    2007-06-12

    An apparatus for measuring the effective vapor diffusion coefficient of a test vapor diffusing through a sample of porous media contained within a test chamber. A chemical sensor measures the time-varying concentration of vapor that has diffused a known distance through the porous media. A data processor contained within the apparatus compares the measured sensor data with analytical predictions of the response curve based on the transient diffusion equation using Fick's Law, iterating on the choice of an effective vapor diffusion coefficient until the difference between the predicted and measured curves is minimized. Optionally, a purge fluid can forced through the porous media, permitting the apparatus to also measure a gas-phase permeability. The apparatus can be made lightweight, self-powered, and portable for use in the field.

  5. Convection coefficients at building surfaces

    NASA Astrophysics Data System (ADS)

    Kammerud, R. C.; Altmayer, E.; Bauman, F. S.; Gadgil, A.; Bohn, M.

    1982-09-01

    Correlations relating the rate of heat transfer from the surfaces of rooms to the enclosed air are being developed, based on empirical and analytic examinations of convection in enclosures. The correlations express the heat transfer rate in terms of boundary conditions relating to room geometry and surface temperatures. Work to date indicates that simple convection coefficient calculation techniques can be developed, which significantly improve accuracy of heat transfer predictions in comparison with the standard calculations recommended by ASHRAE.

  6. Transport coefficients for dense metal plasmas

    NASA Astrophysics Data System (ADS)

    Kuhlbrodt, Sandra; Redmer, Ronald

    2000-11-01

    Thermoelectric transport coefficients of metal plasmas are calculated within the linear response theory applied previously to determine the electrical conductivity of Al and Cu plasmas [R. Redmer, Phys. Rev. E 59, 1073 (1999)]. We consider temperatures of 1-3 eV and densities of 0.001-1 g/cm3 as relevant in rapid wire evaporation experiments. The plasma composition is calculated considering higher ionization stages of atoms up to 5+, and solving the respective system of coupled mass action laws. Interactions between charged particles are treated on T matrix level. Results for the electrical conductivity of various metal plasmas are in reasonable agreement with experimental data. Thermal conductivity and thermopower are also given. In addition, we compare with experimental data for temperatures up to 25 eV and liquidlike densities.

  7. Lorentzian AdS geometries, wormholes, and holography

    SciTech Connect

    Arias, Raul E.; Silva, Guillermo A.; Botta Cantcheff, Marcelo

    2011-03-15

    We investigate the structure of two-point functions for the quantum field theory dual to an asymptotically Lorentzian Anti de Sitter (AdS) wormhole. The bulk geometry is a solution of five-dimensional second-order Einstein-Gauss-Bonnet gravity and causally connects two asymptotically AdS spacetimes. We revisit the Gubser-Klebanov-Polyakov-Witten prescription for computing two-point correlation functions for dual quantum field theories operators O in Lorentzian signature and we propose to express the bulk fields in terms of the independent boundary values {phi}{sub 0}{sup {+-}} at each of the two asymptotic AdS regions; along the way we exhibit how the ambiguity of normalizable modes in the bulk, related to initial and final states, show up in the computations. The independent boundary values are interpreted as sources for dual operators O{sup {+-}} and we argue that, apart from the possibility of entanglement, there exists a coupling between the degrees of freedom living at each boundary. The AdS{sub 1+1} geometry is also discussed in view of its similar boundary structure. Based on the analysis, we propose a very simple geometric criterion to distinguish coupling from entanglement effects among two sets of degrees of freedom associated with each of the disconnected parts of the boundary.

  8. Methods for recalibration of mass spectrometry data

    DOEpatents

    Tolmachev, Aleksey V.; Smith, Richard D.

    2009-03-03

    Disclosed are methods for recalibrating mass spectrometry data that provide improvement in both mass accuracy and precision by adjusting for experimental variance in parameters that have a substantial impact on mass measurement accuracy. Optimal coefficients are determined using correlated pairs of mass values compiled by matching sets of measured and putative mass values that minimize overall effective mass error and mass error spread. Coefficients are subsequently used to correct mass values for peaks detected in the measured dataset, providing recalibration thereof. Sub-ppm mass measurement accuracy has been demonstrated on a complex fungal proteome after recalibration, providing improved confidence for peptide identifications.

  9. Orbits of the visual binaries ADS 8814 and ADS 8065 from observations along a short arc

    NASA Astrophysics Data System (ADS)

    Kiselev, A. A.; Kiyaeva, O. V.; Romanenko, L. G.; Gorynya, N. A.

    2012-07-01

    The orbits of the visual binaries ADS 8814 and ADS 8065 are determined for the first time. The orbits were calculated using the parameters of the apparent motion, based on position observations along short arcs obtained on the 26-inch refrector of the Pulkovo Observatory, supplemented with radial-velocity observations for the stellar components in both pairs obtained on the 1-m telescope of the Simeiz Section of the Crimean Astrophysical Observatory. All previous visual and photographic observations of these stars after 1832 were also taken into account. The orbit of ADS 8814 was refined using the differential-correction method. The orbital periods of these two stars are about 800 and 6000 years, respectively. The mass estimates derived for the known parallaxes from the Hipparcos catalog correspond to the spectral types of these stars. The polar vectors of the obtained orbits in Galactic coordinates are also given.

  10. A deformation of AdS5 × S5

    NASA Astrophysics Data System (ADS)

    Gauntlett, Jerome P.; Gutowski, Jan B.; Suryanarayana, Nemani V.

    2004-11-01

    We analyse a one-parameter family of supersymmetric solutions of type IIB supergravity that includes AdS5 × S5. For small values of the parameter the solutions are causally well behaved, but beyond a critical value closed timelike curves (CTCs) appear. The solutions are holographically dual to {\\cal N}=4 supersymmetric Yang Mills theory on a non-conformally flat background with non-vanishing R-currents. We compute the holographic energy momentum tensor for the spacetime and show that it remains finite even when the CTCs appear. The solutions, as well as the uplift of some recently discovered AdS5 black-hole solutions, are shown to preserve precisely two supersymmetries.

  11. Supersymmetric AdS_6 solutions of type IIB supergravity

    NASA Astrophysics Data System (ADS)

    Kim, Hyojoong; Kim, Nakwoo; Suh, Minwoo

    2015-10-01

    We study the general requirement for supersymmetric AdS_6 solutions in type IIB supergravity. We employ the Killing spinor technique and study the differential and algebraic relations among various Killing spinor bilinears to find the canonical form of the solutions. Our result agrees precisely with the work of Apruzzi et al. (JHEP 1411:099, 2014), which used the pure spinor technique. Hoping to identify the geometry of the problem, we also computed four-dimensional theory through the dimensional reduction of type IIB supergravity on AdS_6. This effective action is essentially a non-linear sigma model with five scalar fields parametrizing {SL}(3,{R})/{SO}(2,1), modified by a scalar potential and coupled to Einstein gravity in Euclidean signature. We argue that the scalar potential can be explained by a subgroup CSO(1,1,1) subset {SL}(3,{R}) in a way analogous to gauged supergravity.

  12. Universal isolation in the AdS landscape

    NASA Astrophysics Data System (ADS)

    Danielsson, U. H.; Dibitetto, G.; Vargas, S. C.

    2016-12-01

    We study the universal conditions for quantum nonperturbative stability against bubble nucleation for pertubatively stable AdS vacua based on positive energy theorems. We also compare our analysis with the preexisting ones in the literature carried out within the thin-wall approximation. The aforementioned criterion is then tested in two explicit examples describing massive type IIA string theory compactified on S3 and S3×S3, respectively. The AdS landscape of both classes of compactifications is known to consist of a set of isolated points. The main result is that all critical points respecting the Breitenlohner-Freedman (BF) bound also turn out be stable at a nonperturbative level. Finally, we speculate on the possible universal features that may be extracted from the above specific examples.

  13. Tachyon inflation in an AdS braneworld with backreaction

    NASA Astrophysics Data System (ADS)

    Bilić, Neven; Dimitrijevic, Dragoljub D.; Djordjevic, Goran S.; Milosevic, Milan

    2017-02-01

    We analyze the inflationary scenario based on the tachyon field coupled with the radion of the second Randall-Sundrum model (RSII). The tachyon Lagrangian is derived from the dynamics of a 3-brane moving in the five-dimensional bulk. The AdS5 geometry of the bulk is extended to include the radion. Using the Hamiltonian formalism we find four nonlinear field equations supplemented by the modified Friedmann equations of the RSII braneworld cosmology. After a suitable rescaling we reduce the parameters of our model to only one free parameter related to the brane tension and the AdS5 curvature. We solve the equations numerically assuming a reasonably wide range of initial conditions determined by physical considerations. Varying the free parameter and initial conditions we confront our results with the Planck 2015 data.

  14. Ambitwistors, oscillators and massless fields on AdS5

    NASA Astrophysics Data System (ADS)

    Uvarov, D. V.

    2016-11-01

    Positive energy unitary irreducible representations of SU (2 , 2) can be constructed with the aid of bosonic oscillators in (anti)fundamental representation of SU(2)L × SU(2)R that are closely related to Penrose twistors. Starting with the correspondence between the doubleton representations, homogeneous functions on projective twistor space and on-shell generalized Weyl curvature SL (2 , C) spinors and their low-spin counterparts, we study in the similar way the correspondence between the massless representations, homogeneous functions on ambitwistor space and, via the Penrose transform, with the gauge fields on Minkowski boundary of AdS5. The possibilities of reconstructing massless fields on AdS5 and some applications are also discussed.

  15. Generalised structures for N=1 AdS backgrounds

    NASA Astrophysics Data System (ADS)

    Coimbra, André; Strickland-Constable, Charles

    2016-11-01

    We expand upon a claim made in a recent paper [arXiv:1411.5721] that generic minimally supersymmetric AdS backgrounds of warped flux compactifications of Type II and M theory can be understood as satisfying a straightforward weak integrability condition in the language of {E}_{d(d)}× {R}+ generalised geometry. Namely, they are spaces admitting a generalised G-structure set by the Killing spinor and with constant singlet generalised intrinsic torsion.

  16. On information loss in AdS3/CFT2

    DOE PAGES

    Fitzpatrick, A. Liam; Kaplan, Jared; Li, Daliang; ...

    2016-05-18

    We discuss information loss from black hole physics in AdS3, focusing on two sharp signatures infecting CFT2 correlators at large central charge c: ‘forbidden singularities’ arising from Euclidean-time periodicity due to the effective Hawking temperature, and late-time exponential decay in the Lorentzian region. We study an infinite class of examples where forbidden singularities can be resolved by non-perturbative effects at finite c, and we show that the resolution has certain universal features that also apply in the general case. Analytically continuing to the Lorentzian regime, we find that the non-perturbative effects that resolve forbidden singularities qualitatively change the behavior ofmore » correlators at times t ~SBH, the black hole entropy. This may resolve the exponential decay of correlators at late times in black hole backgrounds. By Borel resumming the 1/c expansion of exact examples, we explicitly identify ‘information-restoring’ effects from heavy states that should correspond to classical solutions in AdS3. Lastly, our results suggest a line of inquiry towards a more precise formulation of the gravitational path integral in AdS3.« less

  17. Shock Wave Collisions and Thermalization in AdS_5

    NASA Astrophysics Data System (ADS)

    Kovchegov, Y. V.

    We study heavy ion collisions at strong 't Hooft coupling usingAdS/CFT correspondence. According to the AdS/CFT dictionary heavy ion collisions correspond to gravitational shock wave collisions in AdS_5. We construct the metric in the forward light cone after the collision perturbatively through expansion of Einstein equations in graviton exchanges. We obtain an analytic expression for the metric including all-order graviton exchanges with one shock wave, while keeping the exchanges with another shock wave at the lowest order. We read off the corresponding energy-momentum tensor of the produced medium. Unfortunately this energy-momentum tensor does not correspond to ideal hydrodynamics, indicating that higher order graviton exchanges are needed to construct the full solution of the problem. We also show that shock waves must completely stop almost immediately after the collision in AdS_5, which, on the field theory side, corresponds to complete nuclear stopping due to strong coupling effects, likely leading to Landau hydrodynamics. Finally, we perform trapped surface analysis of the shock wave collisions demonstrating that a bulk black hole, corresponding to ideal hydrodynamics on the boundary, has to be created in such collisions, thus constructing a proof of thermalization in heavy ion collisions at strong coupling.

  18. Adding interventions to mass measles vaccinations in India

    PubMed Central

    Verguet, Stéphane; Morris, Shaun K; Sharma, Jitendar K; Ram, Usha; Gauvreau, Cindy; Jones, Edward; Jha, Prabhat; Jit, Mark

    2016-01-01

    Abstract Objective To quantify the impact on mortality of offering a hypothetical set of technically feasible, high-impact interventions for maternal and child survival during India’s 2010–2013 measles supplementary immunization activity. Methods We developed Lives Saved Tool models for 12 Indian states participating in the supplementary immunization, based on state- and sex-specific data on mortality from India’s Million Deaths Study and on health services coverage from Indian household surveys. Potential add-on interventions were identified through a literature review and expert consultations. We quantified the number of lives saved for a campaign offering measles vaccine alone versus a campaign offering measles vaccine with six add-on interventions (nutritional screening and complementary feeding for children, vitamin A and zinc supplementation for children, multiple micronutrient and calcium supplementation in pregnancy, and free distribution of insecticide-treated bednets). Findings The measles vaccination campaign saved an estimated 19 016 lives of children younger than 5 years. A hypothetical campaign including measles vaccine with add-on interventions was projected to save around 73 900 lives (range: 70 200–79 300), preventing 73 700 child deaths (range: 70 000–79 000) and 300 maternal deaths (range: 200–400). The most effective interventions in the whole package were insecticide-treated bednets, measles vaccine and preventive zinc supplementation. Girls accounted for 66% of expected lives saved (12 712/19 346) for the measles vaccine campaign, and 62% of lives saved (45 721/74 367) for the hypothetical campaign including add-on interventions. Conclusion In India, a measles vaccination campaign including feasible, high-impact interventions could substantially increase the number of lives saved and mitigate gender-related inequities in child mortality. PMID:27843161

  19. Analytic self-gravitating Skyrmions, cosmological bounces and AdS wormholes

    NASA Astrophysics Data System (ADS)

    Ayón-Beato, Eloy; Canfora, Fabrizio; Zanelli, Jorge

    2016-01-01

    We present a self-gravitating, analytic and globally regular Skyrmion solution of the Einstein-Skyrme system with winding number w = ± 1, in presence of a cosmological constant. The static spacetime metric is the direct product R ×S3 and the Skyrmion is the self-gravitating generalization of the static hedgehog solution of Manton and Ruback with unit topological charge. This solution can be promoted to a dynamical one in which the spacetime is a cosmology of the Bianchi type-IX with time-dependent scale and squashing coefficients. Remarkably, the Skyrme equations are still identically satisfied for all values of these parameters. Thus, the complete set of field equations for the Einstein-Skyrme-Λ system in the topological sector reduces to a pair of coupled, autonomous, nonlinear differential equations for the scale factor and a squashing coefficient. These equations admit analytic bouncing cosmological solutions in which the universe contracts to a minimum non-vanishing size, and then expands. A non-trivial byproduct of this solution is that a minor modification of the construction gives rise to a family of stationary, regular configurations in General Relativity with negative cosmological constant supported by an SU (2) nonlinear sigma model. These solutions represent traversable AdS wormholes with NUT parameter in which the only "exotic matter" required for their construction is a negative cosmological constant.

  20. A novel method for measuring polymer-water partition coefficients.

    PubMed

    Zhu, Tengyi; Jafvert, Chad T; Fu, Dafang; Hu, Yue

    2015-11-01

    Low density polyethylene (LDPE) often is used as the sorbent material in passive sampling devices to estimate the average temporal chemical concentration in water bodies or sediment pore water. To calculate water phase chemical concentrations from LDPE concentrations accurately, it is necessary to know the LDPE-water partition coefficients (KPE-w) of the chemicals of interest. However, even moderately hydrophobic chemicals have large KPE-w values, making direct measurement experimentally difficult. In this study we evaluated a simple three phase system from which KPE-w can be determined easily and accurately. In the method, chemical equilibrium distribution between LDPE and a surfactant micelle pseudo-phase is measured, with the ratio of these concentrations equal to the LDPE-micelle partition coefficient (KPE-mic). By employing sufficient mass of polymer and surfactant (Brij 30), the mass of chemical in the water phase remains negligible, albeit in equilibrium. In parallel, the micelle-water partition coefficient (Kmic-w) is determined experimentally. KPE-w is the product of KPE-mic and Kmic-w. The method was applied to measure values of KPE-w for 17 polycyclic aromatic hydrocarbons, 37 polychlorinated biphenyls, and 9 polybrominated diphenylethers. These values were compared to literature values. Mass fraction-based chemical activity coefficients (γ) were determined in each phase and showed that for each chemical, the micelles and LDPE had nearly identical affinity.

  1. The Value-Added of Primary Schools: What Is It Really Measuring?

    ERIC Educational Resources Information Center

    Gorard, Stephen

    2008-01-01

    This paper compares the official value-added scores in 2005 for all primary schools in three adjacent Local Educational Authorities (LEAs) in England with the raw-score Key Stage 2 (KS2) results for the same schools. The correlation coefficient for the raw- and value-added scores of these 457 schools is around +0.75. Scatterplots show that there…

  2. Generalized transport coefficients for inelastic Maxwell mixtures under shear flow.

    PubMed

    Garzó, Vicente; Trizac, Emmanuel

    2015-11-01

    The Boltzmann equation framework for inelastic Maxwell models is considered to determine the transport coefficients associated with the mass, momentum, and heat fluxes of a granular binary mixture in spatially inhomogeneous states close to the simple shear flow. The Boltzmann equation is solved by means of a Chapman-Enskog-type expansion around the (local) shear flow distributions f(r)(0) for each species that retain all the hydrodynamic orders in the shear rate. Due to the anisotropy induced by the shear flow, tensorial quantities are required to describe the transport processes instead of the conventional scalar coefficients. These tensors are given in terms of the solutions of a set of coupled equations, which can be analytically solved as functions of the shear rate a, the coefficients of restitution α(rs), and the parameters of the mixture (masses, diameters, and composition). Since the reference distribution functions f(r)(0) apply for arbitrary values of the shear rate and are not restricted to weak dissipation, the corresponding generalized coefficients turn out to be nonlinear functions of both a and α(rs). The dependence of the relevant elements of the three diffusion tensors on both the shear rate and dissipation is illustrated in the tracer limit case, the results showing that the deviation of the generalized transport coefficients from their forms for vanishing shear rates is in general significant. A comparison with the previous results obtained analytically for inelastic hard spheres by using Grad's moment method is carried out, showing a good agreement over a wide range of values for the coefficients of restitution. Finally, as an application of the theoretical expressions derived here for the transport coefficients, thermal diffusion segregation of an intruder immersed in a granular gas is also studied.

  3. AD-1 aircraft in flight

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The Ames-Dryden (AD)-1 was a research aircraft designed to investigate the concept of an oblique (or pivoting) wing. The movie clip runs about 17 seconds and has two air-to-air views of the AD-1. The first shot is from slightly above as the wing pivots to 60 degrees. The other angle is almost directly below the aircraft when the wing is fully pivoted.

  4. Attenuation Coefficient Estimation of the Healthy Human Thyroid In Vivo

    NASA Astrophysics Data System (ADS)

    Rouyer, J.; Cueva, T.; Portal, A.; Yamamoto, T.; Lavarello, R.

    Previous studies have demonstrated that attenuation coefficients can be useful towards characterizing thyroid tissues. In this work, ultrasonic attenuation coefficients were estimated from healthy human thyroids in vivo using a clinical scanner. The selected subjects were five young, healthy volunteers (age: 26 ± 6 years old, gender: three females, two males) with no reported history of thyroid diseases, no palpable thyroid nodules, no smoking habits, and body mass index less than 30 kg/m2. Echographic examinations were conducted by a trained sonographer using a SonixTouch system (Ultrasonix Medical Corporation, Richmond, BC) equipped with an L14-5 linear transducer array (nominal center frequency of 10 MHz, transducer footprint of 3.8 cm). Radiofrequency data corresponding to the collected echographic images in both transverse and longitudinal views were digitized at a sampling rate of 40 MHz and processed with Matlab codes (MathWorks, Natick, MA) to estimate attenuation coefficients using the spectral log difference method. The estimation was performed using an analysis bandwidth spanning from 4.0 to 9.0 MHz. The average value of the estimated ultrasonic attenuation coefficients was equal to 1.34 ± 0.15 dB/(cm.MHz). The standard deviation of the estimated average attenuation coefficient across different volunteers suggests a non-negligible inter-subject variability in the ultrasonic attenuation coefficient of the human thyroid.

  5. CFD Modeling of the Multipurpose Hydrogen Test Bed (MHTB) Self-Pressurization and Spray Bar Mixing Experiments in Normal Gravity: Effect of the Accommodation Coefficient on the Tank Pressure

    NASA Technical Reports Server (NTRS)

    Kartuzova, Olga; Kassemi, Mohammad

    2015-01-01

    A CFD model for simulating the self-pressurization of a large scale liquid hydrogen storage tank is utilized in this paper to model the MHTB self-pressurization experiment. The kinetics-based Schrage equation is used to account for the evaporative and condensi ng interfacial mass flows in this model. The effect of the accommodation coefficient for calculating the interfacial mass transfer rate on the tank pressure during tank selfpressurization is studied. The values of the accommodation coefficient which were considered in this study vary from 1.0e-3 to 1.0e-1 for the explicit VOF model and from 1.0e-4 to 1.0e-3 for the implicit VOF model. The ullage pressure evolutions are compared against experimental data. A CFD model for controlling pressure in cryogenic storage tanks by spraying cold liquid into the ullage is also presented. The Euler-Lagrange approach is utilized for tracking the spray droplets and for modeling the interaction between the droplets and the continuous phase (ullage). The spray model is coupled with the VOF model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. Droplet-ullage heat and mass transfer are modeled. The flow, temperature, and interfacial mass flux, as well as droplets trajectories, size distribution and temperatures predicted by the model are presented. The ul lage pressure and vapor temperature evolutions are compared with experimental data obtained from the MHTB spray bar mixing experiment. The effect of the accommodation coefficient for calculating the interfacial and droplet mass transfer rates on the tank pressure during mixing of the vapor using spray is studied. The values used for the accommodation coefficient at the interface vary from 1.0e-5 to 1.0e-2. The droplet accommodation coefficient values vary from 2.0e-6 to 1.0e-4.

  6. Euclidean and Noetherian entropies in AdS space

    SciTech Connect

    Dutta, Suvankar; Gopakumar, Rajesh

    2006-08-15

    We examine the Euclidean action approach, as well as that of Wald, to the entropy of black holes in asymptotically AdS spaces. From the point of view of holography these two approaches are somewhat complementary in spirit and it is not obvious why they should give the same answer in the presence of arbitrary higher derivative gravity corrections. For the case of the AdS{sub 5} Schwarzschild black hole, we explicitly study the leading correction to the Bekenstein-Hawking entropy in the presence of a variety of higher derivative corrections studied in the literature, including the Type IIB R{sup 4} term. We find a nontrivial agreement between the two approaches in every case. Finally, we give a general way of understanding the equivalence of these two approaches.

  7. New Features in ADS Labs

    NASA Astrophysics Data System (ADS)

    Accomazzi, Alberto; Kurtz, M. J.; Henneken, E. A.; Grant, C. S.; Thompson, D.; Di Milia, G.; Luker, J.; Murray, S. S.

    2013-01-01

    The NASA Astrophysics Data System (ADS) has been working hard on updating its services and interfaces to better support our community's research needs. ADS Labs is a new interface built on the old tried-and-true ADS Abstract Databases, so all of ADS's content is available through it. In this presentation we highlight the new features that have been developed in ADS Labs over the last year: new recommendations, metrics, a citation tool and enhanced fulltext search. ADS Labs has long been providing article-level recommendations based on keyword similarity, co-readership and co-citation analysis of its corpus. We have now introduced personal recommendations, which provide a list of articles to be considered based on a individual user's readership history. A new metrics interface provides a summary of the basic impact indicators for a list of records. These include the total and normalized number of papers, citations, reads, and downloads. Also included are some of the popular indices such as the h, g and i10 index. The citation helper tool allows one to submit a set of records and obtain a list of top 10 papers which cite and/or are cited by papers in the original list (but which are not in it). The process closely resembles the network approach of establishing "friends of friends" via an analysis of the citation network. The full-text search service now covers more than 2.5 million documents, including all the major astronomy journals, as well as physics journals published by Springer, Elsevier, the American Physical Society, the American Geophysical Union, and all of the arXiv eprints. The full-text search interface interface allows users and librarians to dig deep and find words or phrases in the body of the indexed articles. ADS Labs is available at http://adslabs.org

  8. Heavy quark potential from deformed AdS5 models

    NASA Astrophysics Data System (ADS)

    Zhang, Zi-qiang; Hou, De-fu; Chen, Gang

    2017-04-01

    In this paper, we investigate the heavy quark potential in some holographic QCD models. The calculation relies on a modified renormalization scheme mentioned in a previous work of Albacete et al. After studying the heavy quark potential in Pirner-Galow model and Andreev-Zakharov model, we extend the discussion to a general deformed AdS5 case. It is shown that the obtained potential is negative definite for all quark-antiquark separations, differs from that using the usual renormalization scheme.

  9. The AdS central charge in string theory

    NASA Astrophysics Data System (ADS)

    Troost, Jan

    2011-11-01

    We evaluate the vacuum expectation value of the central charge operator in string theory in an AdS3 vacuum. Our calculation provides a rare non-zero one-point function on a spherical worldsheet. The evaluation involves the regularization both of a worldsheet ultraviolet divergence (associated to the infinite volume of the conformal Killing group), and a space-time infrared divergence (corresponding to the infinite volume of space-time). The two divergences conspire to give a finite result, which is the classical general relativity value for the central charge, corrected in bosonic string theory by an infinite series of tree level higher derivative terms.

  10. Introducing ADS 2.0

    NASA Astrophysics Data System (ADS)

    Accomazzi, Alberto; Kurtz, M. J.; Henneken, E. A.; Grant, C. S.; Thompson, D.; Luker, J.; Chyla, R.; Murray, S. S.

    2014-01-01

    In the spring of 1993, the Smithsonian/NASA Astrophysics Data System (ADS) first launched its bibliographic search system. It was known then as the ADS Abstract Service, a component of the larger Astrophysics Data System effort which had developed an interoperable data system now seen as a precursor of the Virtual Observatory. As a result of the massive technological and sociological changes in the field of scholarly communication, the ADS is now completing the most ambitious technological upgrade in its twenty-year history. Code-named ADS 2.0, the new system features: an IT platform built on web and digital library standards; a new, extensible, industrial strength search engine; a public API with various access control capabilities; a set of applications supporting search, export, visualization, analysis; a collaborative, open source development model; and enhanced indexing of content which includes the full-text of astronomy and physics publications. The changes in the ADS platform affect all aspects of the system and its operations, including: the process through which data and metadata are harvested, curated and indexed; the interface and paradigm used for searching the database; and the follow-up analysis capabilities available to the users. This poster describes the choices behind the technical overhaul of the system, the technology stack used, and the opportunities which the upgrade is providing us with, namely gains in productivity and enhancements in our system capabilities.

  11. Diffusion coefficient in hydrogel under high-frequency ultrasound

    NASA Astrophysics Data System (ADS)

    Tsukamoto, Akira; Tanaka, Kei; Kumata, Tatsuya; Watanabe, Yoshiaki; Miyata, Shogo; Furukawa, Katsuko; Ushida, Takashi

    2007-03-01

    Modulating hydrogel properties by external stimuli can be applied for drug delivery system. For example, ultrasound can enhance drug release from hydrogel by the mechanism which is not fully understood. We measured diffusion coefficient in hydrogel under high-frequency ultrasound to understand mass transport property. To estimate diffusion coefficient, FRAP (fluorescence recovery after photobleaching) technique was applied with time-lapse fluorescence microscopy and we analyzed fluorescence recovery after photobleaching of FITC-dextran (4˜40 kDa) which was fully fused in agarose gel (1˜3 %). As a result, diffusion coefficient was altered when agarose gel was sonicated by 1MHz ultrasound with 400kPa (peak-peak). We discussed several possible underlying mechanisms such as cavitation, heat and phase transition with extended experimental data.

  12. Primordial fluctuations from complex AdS saddle points

    SciTech Connect

    Hertog, Thomas; Woerd, Ellen van der E-mail: ellen@itf.fys.kuleuven.be

    2016-02-01

    One proposal for dS/CFT is that the Hartle-Hawking (HH) wave function in the large volume limit is equal to the partition function of a Euclidean CFT deformed by various operators. All saddle points defining the semiclassical HH wave function in cosmology have a representation in which their interior geometry is part of a Euclidean AdS domain wall with complex matter fields. We compute the wave functions of scalar and tensor perturbations around homogeneous isotropic complex saddle points, turning on single scalar field matter only. We compare their predictions for the spectra of CMB perturbations with those of a different dS/CFT proposal based on the analytic continuation of inflationary universes to real asymptotically AdS domain walls. We find the predictions of both bulk calculations agree to first order in the slow roll parameters, but there is a difference at higher order which, we argue, is a signature of the HH state of the fluctuations.

  13. AdS nonlinear instability: moving beyond spherical symmetry

    NASA Astrophysics Data System (ADS)

    Dias, Óscar J. C.; Santos, Jorge E.

    2016-12-01

    Anti-de Sitter (AdS) is conjectured to be nonlinear unstable to a weakly turbulent mechanism that develops a cascade towards high frequencies, leading to black hole formation (Dafermos and Holzegel 2006 Seminar at DAMTP (University of Cambridge) available at https://dpmms.cam.ac.uk/~md384/ADSinstability.pdf, Bizon and Rostworowski 2011 Phys. Rev. Lett. 107 031102). We give evidence that the gravitational sector of perturbations behaves differently from the scalar one studied by Bizon and Rostworowski. In contrast with Bizon and Rostworowski, we find that not all gravitational normal modes of AdS can be nonlinearly extended into periodic horizonless smooth solutions of the Einstein equation. In particular, we show that even seeds with a single normal mode can develop secular resonances, unlike the spherically symmetric scalar field collapse studied by Bizon and Rostworowski. Moreover, if the seed has two normal modes, more than one resonance can be generated at third order, unlike the spherical collapse of Bizon and Rostworowski. We also show that weak turbulent perturbative theory predicts the existence of direct and inverse cascades, with the former dominating the latter for equal energy two-mode seeds.

  14. The emission coefficient of uranium plasmas

    NASA Technical Reports Server (NTRS)

    Schneider, R. T.; Campbell, H. D.; Mack, J. M.

    1973-01-01

    The emission coefficient for uranium plasmas (Temperature: 8000 K) was measured for the wavelength range (200 A - 6000 A). The results are compared to theory and other measurements. The absorption coefficient for the same wavelength interval is also given.

  15. Second-degree Stokes coefficients from multi-satellite SLR

    NASA Astrophysics Data System (ADS)

    Bloßfeld, Mathis; Müller, Horst; Gerstl, Michael; Štefka, Vojtěch; Bouman, Johannes; Göttl, Franziska; Horwath, Martin

    2015-09-01

    The long wavelength part of the Earth's gravity field can be determined, with varying accuracy, from satellite laser ranging (SLR). In this study, we investigate the combination of up to ten geodetic SLR satellites using iterative variance component estimation. SLR observations to different satellites are combined in order to identify the impact of each satellite on the estimated Stokes coefficients. The combination of satellite-specific weekly or monthly arcs allows to reduce parameter correlations of the single-satellite solutions and leads to alternative estimates of the second-degree Stokes coefficients. This alternative time series might be helpful for assessing the uncertainty in the impact of the low-degree Stokes coefficients on geophysical investigations. In order to validate the obtained time series of second-degree Stokes coefficients, a comparison with the SLR RL05 time series of the Center of Space Research (CSR) is done. This investigation shows that all time series are comparable to the CSR time series. The precision of the weekly/monthly and coefficients is analyzed by comparing mass-related equatorial excitation functions with geophysical model results and reduced geodetic excitation functions. In case of , the annual amplitude and phase of the DGFI solution agrees better with three of four geophysical model combinations than other time series. In case of , all time series agree very well to each other. The impact of on the ice mass trend estimates for Antarctica are compared based on CSR GRACE RL05 solutions, in which different monthly time series are used for replacing. We found differences in the long-term Antarctic ice loss of Gt/year between the GRACE solutions induced by the different SLR time series of CSR and DGFI, which is about 13 % of the total ice loss of Antarctica. This result shows that Antarctic ice mass loss quantifications must be carefully interpreted.

  16. Strings on AdS wormholes and nonsingular black holes

    NASA Astrophysics Data System (ADS)

    Lü, H.; Vázquez-Poritz, Justin F.; Zhang, Zhibai

    2015-01-01

    Certain AdS black holes in the STU model can be conformally scaled to wormhole and black hole backgrounds which have two asymptotically AdS regions and are completely free of curvature singularities. While there is a delta-function source for the dilaton, classical string probes are not sensitive to this singularity. According to the AdS/CFT correspondence, the dual field theory lives on the union of the disjoint boundaries. For the wormhole background, causal contact exists between the two boundaries and the structure of certain correlation functions is indicative of an interacting phase for which there is a coupling between the degrees of freedom living at each boundary. The nonsingular black hole describes an entangled state in two non-interacting identical conformal field theories. By studying the behavior of open strings on these backgrounds, we extract a number of features of the ‘quarks’ and ‘anti-quarks’ that live in the field theories. In the interacting phase, we find that there is a maximum speed with which the quarks can move without losing energy, beyond which energy is transferred from a quark in one field theory to a quark in the other. We also compute the rate at which moving quarks within entangled states lose energy to the two surrounding plasmas. While a quark-antiquark pair within a single field theory exhibits Coulomb interaction for small separation, a quark in one field theory exhibits spring-like confinement with an anti-quark in the other field theory. For the entangled states, we study how the quark-antiquark screening length depends on temperature and chemical potential.

  17. Baldcypress tree ring elemental concentrations at Reelfoot Lake, Tennessee from AD 1795 to AD 1820

    SciTech Connect

    Van Arsdale, R.; Hall, G.

    1995-11-01

    Many two hundred year old baldcypress trees in Reelfoot Lake, Tennessee, lived through the great New Madrid earthquakes of 1811--1812. This study was undertaken to determine if the elemental composition of baldcypress tree rings showed any systematic variation through the earthquake period of AD 1795 through AD 1820. Multiple cores were collected from two Reelfoot Lake baldcypress trees and analyzed using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Individual yearly rings and five-year ring segments were analyzed to determine their elemental compositions. The cores were analyzed for Li through U but only Ba, Ce, Cs, Cu, I, La, Mg, Mn, Nd, Rb, Sm, Sr, and Zn were found to be in appropriate concentrations for this study. Of these elements only Ce, I, La, Nd, Rb, and Sm showed any systematic changes within individual cores. Comparison of three cores taken from one tree reveal that tree-ring elemental concentrations and changes in tree-ring elemental concentration through time are very different among the cores. When comparing the elemental concentrations of tree rings for the same years in the two different trees neither elemental concentrations nor changes in elemental concentration through time were similar. We conclude that the elemental concentrations in the tree rings of the two baldcypress trees analyzed in this study show no systematic change through the earthquake period of AD 1795 through AD 1820.

  18. Organic Aerosol Component (OACOMP) Value-Added Product Report

    SciTech Connect

    Fast, J; Zhang, Q; Tilp, A; Shippert, T; Parworth, C; Mei, F

    2013-08-23

    Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

  19. Standards for Standardized Logistic Regression Coefficients

    ERIC Educational Resources Information Center

    Menard, Scott

    2011-01-01

    Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

  20. A Note on the Dynamic Correlation Coefficient.

    DTIC Science & Technology

    1977-11-04

    The use of the dynamic correlation coefficient as a test of spuriousness in longitudinal designs was examined. It was shown that given conditions of...spuriousness and perfect stationarity, the dynamic correlation coefficient was positively, rather than inversely, related to spuriousness. It was...recommended that the dynamic correlation coefficient not be used in the future as a test of spuriousness. (Author)

  1. Soccer Ball Lift Coefficients via Trajectory Analysis

    ERIC Educational Resources Information Center

    Goff, John Eric; Carre, Matt J.

    2010-01-01

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin…

  2. M-Bonomial Coefficients and Their Identities

    ERIC Educational Resources Information Center

    Asiru, Muniru A.

    2010-01-01

    In this note, we introduce M-bonomial coefficients or (M-bonacci binomial coefficients). These are similar to the binomial and the Fibonomial (or Fibonacci-binomial) coefficients and can be displayed in a triangle similar to Pascal's triangle from which some identities become obvious.

  3. The Effective Mass of a Ball in the Air

    ERIC Educational Resources Information Center

    Messer, J.; Pantaleone, J.

    2010-01-01

    The air surrounding a projectile affects the projectile's motion in three very different ways: the drag force, the buoyant force, and the added mass. The added mass is an increase in the projectile's inertia from the motion of the air around it. Here we experimentally measure the added mass of a spherical projectile in air. The results agree well…

  4. Generic transport coefficients of a confined electrolyte solution

    NASA Astrophysics Data System (ADS)

    Yoshida, Hiroaki; Mizuno, Hideyuki; Kinjo, Tomoyuki; Washizu, Hitoshi; Barrat, Jean-Louis

    2014-11-01

    Physical parameters characterizing electrokinetic transport in a confined electrolyte solution are reconstructed from the generic transport coefficients obtained within the classical nonequilibrium statistical thermodynamic framework. The electro-osmotic flow, the diffusio-osmotic flow, the osmotic current, as well as the pressure-driven Poiseuille-type flow, the electric conduction, and the ion diffusion are described by this set of transport coefficients. The reconstruction is demonstrated for an aqueous NaCl solution between two parallel charged surfaces with a nanoscale gap, by using the molecular dynamic (MD) simulations. A Green-Kubo approach is employed to evaluate the transport coefficients in the linear-response regime, and the fluxes induced by the pressure, electric, and chemical potential fields are compared with the results of nonequilibrium MD simulations. Using this numerical scheme, the influence of the salt concentration on the transport coefficients is investigated. Anomalous reversal of diffusio-osmotic current, as well as that of electro-osmotic flow, is observed at high surface charge densities and high added-salt concentrations.

  5. Calculation of Dynamic Coefficients for Multiwound Foil Bearings

    NASA Astrophysics Data System (ADS)

    Feng, Kai; Kaneko, Shigehiko

    Dynamic performance of multiwound foil bearings with the effects of foil local deflection is investigated. The foils, separated and supported by projections on the ir surface are treated as thin plates. Deflections of the foils are solved with a finite element model. The air pressure is calculated with the Reynolds' equation by treating the lubricant as an isothermal idea gas. The effects of foils are simulated with the deflection of top foil added to the film thickness. A finite difference computer program is developed to solve the Reynolds equation and the elastic deflection equation, simultaneously. Perturbation method is used to determine the dynamic coefficients. The effects of foil deflection is discussed by comparing the dynamic coefficients of a foil bearing and a rigid bearing. Experimental data from a test rig supported by two multiwound foil bearings are used to validate this numerical solution.

  6. Separating Growth from Value Added

    ERIC Educational Resources Information Center

    Yeagley, Raymond

    2007-01-01

    This article discusses Rochester's two academic models that offer different tools for different purposes--measuring individual learning and measuring what affects learning. The main focus of currently available growth measures is formative assessment--providing data to inform instructional planning. Value-added assessment is not a student…

  7. Adding Value to Indiana's Commodities.

    ERIC Educational Resources Information Center

    Welch, Mary A., Ed.

    1995-01-01

    Food processing plants are adding value to bulk and intermediate products to sell overseas. The Asian Pacific Rim economies constituted the largest market for consumer food products in 1993. This shift toward consumer food imports in this area is due to more women working outside the home, the internationalization of populations, and dramatic…

  8. Courtship American Style: Newspaper Ads

    ERIC Educational Resources Information Center

    Cameron, Catherine; And Others

    1977-01-01

    This study investigated an increasing social phenomenon--newspaper advertising for dating or marital partners--in terms of the bargaining process involved. Content analysis of personal ads in a popular "respectable" singles newspaper revealed a pattern of offers and requests reminiscent of a heterosexual stock market. (Author)

  9. Effect of liquid distribution on gas-water phase mass transfer in an unsaturated sand during infiltration

    NASA Astrophysics Data System (ADS)

    Imhoff, Paul T.; Jaffé, Peter R.

    1994-09-01

    Gas-water phase mass transfer was examined in a homogeneous sand with both the gas and water phase mobile: water was infiltrated from the top of the sand column while benzene-laden air flowed upward from the bottom. Mass-transfer limitations for this situation may be important for applications of bioventing, where water and nutrients are added at the ground surface simultaneously with induced air movement to carry oxygen and volatile organics to microbial populations. Gas- and water-phase samples indicate that gas-water phase mass transfer was sufficiently fast that equilibrium between gas and water phases was achieved at all sampling locations within the porous medium. Lower-bound estimates for the gas-water mass-transfer rate coefficient show that mass transfer was at least 10-40 times larger than predictions made from an empirical model developed for gas-water phase mass transfer in an identical porous medium. A water-phase tracer test demonstrates that water flow was much more uniform in this study than in those earlier experiments, which is a likely explanation for the differing rates of gas-water phase mass transfer. It is hypothesized that the liquid distribution in previous laboratory experiments was less uniform because of preferential flow paths due to wetting front instabilities. Gas-water phase mass-transfer rate coefficients reported in this investigation are for an ideal situation of uniform water infiltration: mass-transfer rates in field soils are expected to be significantly smaller.

  10. Second virial coefficients for chain molecules

    SciTech Connect

    Bokis, C.P.; Donohue, M.D. . Dept. of Chemical Engineering); Hall, C.K. . Dept. of Chemical Engineering)

    1994-01-01

    The importance of having accurate second virial coefficients in phase equilibrium calculations, especially for the calculation of dew points, is discussed. The square-well potentials results in a simple but inaccurate equation for the second virial coefficient for small, spherical molecules such as argon. Here, the authors present a new equation for the second virial coefficient of both spherical molecules and chain molecules which is written in a form similar to that for the square-well potential. This new equation is accurate in comparison to Monte Carlo simulation data on second virial coefficients for square-well chain molecules and with second virial coefficients obtained from experiments on n-alkanes.

  11. An investigation of AdS2 backreaction and holography

    NASA Astrophysics Data System (ADS)

    Engelsöy, Julius; Mertens, Thomas G.; Verlinde, Herman

    2016-07-01

    We investigate a dilaton gravity model in AdS2 proposed by Almheiri and Polchinski [1] and develop a 1d effective description in terms of a dynamical boundary time with a Schwarzian derivative action. We show that the effective model is equivalent to a 1d version of Liouville theory, and investigate its dynamics and symmetries via a standard canonical framework. We include the coupling to arbitrary conformal matter and analyze the effective action in the presence of possible sources. We compute commutators of local operators at large time separation, and match the result with the time shift due to a gravitational shockwave interaction. We study a black hole evaporation process and comment on the role of entropy in this model.

  12. Supersymmetry Properties of AdS Supergravity Backgrounds

    NASA Astrophysics Data System (ADS)

    Beck, Samuel; Gutowski, Jan; Papadopoulos, George

    2017-01-01

    Anti-de Sitter supergravity backgrounds are of particular interest in light of the AdS/CFT correspondence, which relates them to dual conformal field theories on the boundary of the anti-de Sitter space. We have investigated the forms of the supersymmetries these backgrounds preserve by solving the Killing spinor equations on the anti-de Sitter components of these spaces. We have found that a supersymmetric AdSn background necessarily preserves 2⌊n/2⌋ k supersymmetries for n <= 4 and 2 ⌊n/2 ⌋ + 1 k supersymmetries for 4 < n <= 7 , k ∈N> 0 . Additionally, we have found that the Killing spinors of each background are exactly the zeroes of a Dirac-like operator constructed from the Killing spinor equations.

  13. On jordanian deformations of AdS5 and supergravity

    NASA Astrophysics Data System (ADS)

    Hoare, Ben; van Tongeren, Stijn J.

    2016-10-01

    We consider various homogeneous Yang-Baxter deformations of the {{AdS}}5× {{{S}}}5 superstring that can be obtained from the η-deformed superstring and related models by singular boosts. The jordanian deformations we obtain in this way behave similarly to the η-deformed model with regard to supergravity: T dualizing the classical sigma model it is possible to find corresponding solutions of supergravity, which, however, have dilatons that prevent T dualizing back. Hence the backgrounds of these jordanian deformations are not solutions of supergravity. Still, they do satisfy a set of recently found modified supergravity equations which implies that the corresponding sigma models are scale invariant. The abelian models that we obtain by singular boosts do directly correspond to solutions of supergravity. In addition to our main results we consider contraction limits of our main example, which do correspond to supergravity solutions.

  14. Multilayer thin-film inspection through measurements of reflection coefficients.

    PubMed

    Wu, Kai; Lee, Cheng-Chung; Brock, Neal J; Kimbrough, Brad

    2011-08-15

    A vibration-insensitive interferometer is described to measure the thickness, refraction index and surface profile of thin-film stack at normal incidence. By satisfying the continuous boundary conditions of electric and magnetic fields at interfaces in a multilayer film stack, the reflection coefficient phase of the thin-film stack can be distinguished from the phase of spatial path difference, thus thickness and refraction index can be extracted. The experiment results showed that the measurement precision is significantly increased after the phase analysis was added into the reflectance analysis.

  15. Holography beyond conformal invariance and AdS isometry?

    SciTech Connect

    Barvinsky, A. O.

    2015-03-15

    We suggest that the principle of holographic duality be extended beyond conformal invariance and AdS isometry. Such an extension is based on a special relation between functional determinants of the operators acting in the bulk and on its boundary, provided that the boundary operator represents the inverse propagators of the theory induced on the boundary by the Dirichlet boundary value problem in the bulk spacetime. This relation holds for operators of a general spin-tensor structure on generic manifolds with boundaries irrespective of their background geometry and conformal invariance, and it apparently underlies numerous O(N{sup 0}) tests of the AdS/CFT correspondence, based on direct calculation of the bulk and boundary partition functions, Casimir energies, and conformal anomalies. The generalized holographic duality is discussed within the concept of the “double-trace” deformation of the boundary theory, which is responsible in the case of large-N CFT coupled to the tower of higher-spin gauge fields for the renormalization group flow between infrared and ultraviolet fixed points. Potential extension of this method beyond the one-loop order is also briefly discussed.

  16. Charged rotating AdS black holes with Chern-Simons coupling

    NASA Astrophysics Data System (ADS)

    Mir, Mozhgan; Mann, Robert B.

    2017-01-01

    We obtain a perturbative solution for rotating charged black holes in five-dimensional Einstein-Maxwell-Chern-Simons theory with a negative cosmological constant. We start from a small undeformed Kerr-AdS solution and use the electric charge as a perturbative parameter to build up black holes with equal-magnitude angular momenta up to fourth order. These black hole solutions are described by three parameters, the charge, horizon radius and horizon angular velocity. We determine the physical quantities of these black holes and study their dependence on the parameters of black holes and arbitrary Chern-Simons coefficient. In particular, for values of the CS coupling constant beyond its supergravity value, due to a rotational instability, counterrotating black holes arise. Also the rotating solutions appear to have vanishing angular momenta and are not manifest uniquely by their global charges.

  17. Effects of Adding Nanoparticles on Boiling and Condensing Heat Transfer inside a horizontal round tube

    NASA Astrophysics Data System (ADS)

    Sheikholeslami, Mohsen; Sadoughi, Mohammadkazem; Shariatmadar, Hamed; Akhavan-Behabadi, Mohammad Ali

    2015-11-01

    An experimental investigation is performed on heat transfer evaluation of a nano-refrigerant flow during condensation and evaporation inside a horizontal round tube. Experiments are carried out for three working fluid types including: i) pure refrigerant (R600a); ii) refrigerant/lubricant (R600a/oil); and iii) nano-refrigerant: refrigerant/lubricant/nanoparticles (R600a/oil/CuO). Nanoparticles are added to the lubricant and their mixture is mixed with pure refrigerant. Therefore, nano-refrigerants (R600a/oil/CuO) are prepared by dispersing CuO nanoparticles with different fractions of 0.5%, 1% and 1.5% in the baseline mixture (R600a/oil). Effects of different factors including vapor quality, mass flux, and nanoparticles on the heat transfer coefficient are examined for both of condensation and evaporation flows, separately. The results shows that maximum heat transfer augmentation of 79% and 83% are achieved by using the refrigerant/lubricant/nanoparticles mixture, in comparison with the pure refrigerant case in condensation and evaporation, respectively which are occurred for nano-refrigerant with 1.5% mass fraction in both of them.

  18. Stability analysis of f( R)-AdS black holes

    NASA Astrophysics Data System (ADS)

    Moon, Taeyoon; Myung, Yun Soo; Son, Edwin J.

    2011-10-01

    We study the stability of the f( R)-AdS (Schwarzschild-AdS) black hole obtained from f( R) gravity. In order to resolve the difficulty of solving fourth-order linearized equations, we transform f( R) gravity into scalar-tensor theory by introducing two auxiliary scalars. In this case, the linearized curvature scalar becomes a dynamical scalaron, showing that all linearized equations are second order. Using the positivity of gravitational potentials and S-deformed technique allows us to guarantee the stability of f( R)-AdS black hole if the scalaron mass squared satisfies the Breitenlohner-Freedman bound. This is confirmed by computing quasinormal frequencies of the scalaron for the f( R)-AdS black hole.

  19. Investigating bias in squared regression structure coefficients

    PubMed Central

    Nimon, Kim F.; Zientek, Linda R.; Thompson, Bruce

    2015-01-01

    The importance of structure coefficients and analogs of regression weights for analysis within the general linear model (GLM) has been well-documented. The purpose of this study was to investigate bias in squared structure coefficients in the context of multiple regression and to determine if a formula that had been shown to correct for bias in squared Pearson correlation coefficients and coefficients of determination could be used to correct for bias in squared regression structure coefficients. Using data from a Monte Carlo simulation, this study found that squared regression structure coefficients corrected with Pratt's formula produced less biased estimates and might be more accurate and stable estimates of population squared regression structure coefficients than estimates with no such corrections. While our findings are in line with prior literature that identified multicollinearity as a predictor of bias in squared regression structure coefficients but not coefficients of determination, the findings from this study are unique in that the level of predictive power, number of predictors, and sample size were also observed to contribute bias in squared regression structure coefficients. PMID:26217273

  20. Investigating bias in squared regression structure coefficients.

    PubMed

    Nimon, Kim F; Zientek, Linda R; Thompson, Bruce

    2015-01-01

    The importance of structure coefficients and analogs of regression weights for analysis within the general linear model (GLM) has been well-documented. The purpose of this study was to investigate bias in squared structure coefficients in the context of multiple regression and to determine if a formula that had been shown to correct for bias in squared Pearson correlation coefficients and coefficients of determination could be used to correct for bias in squared regression structure coefficients. Using data from a Monte Carlo simulation, this study found that squared regression structure coefficients corrected with Pratt's formula produced less biased estimates and might be more accurate and stable estimates of population squared regression structure coefficients than estimates with no such corrections. While our findings are in line with prior literature that identified multicollinearity as a predictor of bias in squared regression structure coefficients but not coefficients of determination, the findings from this study are unique in that the level of predictive power, number of predictors, and sample size were also observed to contribute bias in squared regression structure coefficients.

  1. Gas-film coefficients for streams

    USGS Publications Warehouse

    Rathbun, R.E.; Tai, D.Y.

    1983-01-01

    Equations for predicting the gas-film coefficient for the volatilization of organic solutes from streams are developed. The film coefficient is a function of windspeed and water temperature. The dependence of the coefficient on windspeed is determined from published information on the evaporation of water from a canal. The dependence of the coefficient on temperature is determined from laboratory studies on the evaporation of water. Procedures for adjusting the coefficients for different organic solutes are based on the molecular diffusion coefficient and the molecular weight. The molecular weight procedure is easiest to use because of the availability of molecular weights. However, the theoretical basis of the procedure is questionable. The diffusion coefficient procedure is supported by considerable data. Questions, however, remain regarding the exact dependence of the film coefficint on the diffusion coefficient. It is suggested that the diffusion coefficient procedure with a 0.68-power dependence be used when precise estimate of the gas-film coefficient are needed and that the molecular weight procedure be used when only approximate estimates are needed.

  2. Realizing "value-added" metrology

    NASA Astrophysics Data System (ADS)

    Bunday, Benjamin; Lipscomb, Pete; Allgair, John; Patel, Dilip; Caldwell, Mark; Solecky, Eric; Archie, Chas; Morningstar, Jennifer; Rice, Bryan J.; Singh, Bhanwar; Cain, Jason; Emami, Iraj; Banke, Bill, Jr.; Herrera, Alfredo; Ukraintsev, Vladamir; Schlessinger, Jerry; Ritchison, Jeff

    2007-03-01

    The conventional premise that metrology is a "non-value-added necessary evil" is a misleading and dangerous assertion, which must be viewed as obsolete thinking. Many metrology applications are key enablers to traditionally labeled "value-added" processing steps in lithography and etch, such that they can be considered integral parts of the processes. Various key trends in modern, state-of-the-art processing such as optical proximity correction (OPC), design for manufacturability (DFM), and advanced process control (APC) are based, at their hearts, on the assumption of fine-tuned metrology, in terms of uncertainty and accuracy. These trends are vehicles where metrology thus has large opportunities to create value through the engineering of tight and targetable process distributions. Such distributions make possible predictability in speed-sorts and in other parameters, which results in high-end product. Additionally, significant reliance has also been placed on defect metrology to predict, improve, and reduce yield variability. The necessary quality metrology is strongly influenced by not only the choice of equipment, but also the quality application of these tools in a production environment. The ultimate value added by metrology is a result of quality tools run by a quality metrology team using quality practices. This paper will explore the relationships among present and future trends and challenges in metrology, including equipment, key applications, and metrology deployment in the manufacturing flow. Of key importance are metrology personnel, with their expertise, practices, and metrics in achieving and maintaining the required level of metrology performance, including where precision, matching, and accuracy fit into these considerations. The value of metrology will be demonstrated to have shifted to "key enabler of large revenues," debunking the out-of-date premise that metrology is "non-value-added." Examples used will be from critical dimension (CD

  3. Scattering States in AdS/CFT

    SciTech Connect

    Fitzpatrick, A.Liam; Kaplan, Jared; /SLAC

    2012-02-14

    We show that suitably regulated multi-trace primary states in large N CFTs behave like 'in' and 'out' scattering states in the flat-space limit of AdS. Their transition matrix elements approach the exact scattering amplitudes for the bulk theory, providing a natural CFT definition of the flat space S-Matrix. We study corrections resulting from the AdS curvature and particle propagation far from the center of AdS, and show that AdS simply provides an IR regulator that disappears in the flat space limit.

  4. Warping, extra dimensions, and a slice of AdSd

    NASA Astrophysics Data System (ADS)

    McDonald, Kristian L.

    2010-01-01

    Inspired by the Randall-Sundrum framework we consider a number of phenomenologically relevant model-building questions on a slice of compactified AdSd for d>5. Such spaces are interesting as they enable one to realize the weak scale via warping. We perform the Kaluza-Klein (KK) reduction for gravitons and bulk vectors in these spaces, and for the case of AdS6 consider the KK spectrum of gauge scalars. We further obtain the KK towers for bulk fermions on a slice of AdS7 and AdS9 and show that the Randall-Sundrum approach to flavor generalizes to these spaces with the localization of chiral zero-mode fermions controlled by their bulk Dirac mass parameters. However, for the phenomenologically interesting case where the transverse radius is R-1˜TeV, we show that bulk standard model fields are not viable due to a resulting volume suppression of the gauge-coupling constants. A similar suppression occurs for the case of UV localization. Thus it seems that the standard model fields should be confined to the infrared brane in such spaces. Sterile fields and extended gauge sectors may propagate in the bulk, with the gauge-coupling volume suppression experienced by the latter motivating a weak coupling to standard model fields. We also discuss some issues regarding the effective 4D theory description in these spaces.

  5. Thick domain walls in AdS black hole spacetimes

    SciTech Connect

    Moderski, Rafal; Rogatko, Marek

    2006-08-15

    Equations of motion for a real self-gravitating scalar field in the background of a black hole with negative cosmological constant were solved numerically. We obtain a sequence of static axisymmetric solutions representing thick domain wall cosmological black hole systems, depending on the mass of black hole, cosmological parameter and the parameter binding black hole mass with the width of the domain wall. For the case of extremal cosmological black hole the expulsion of scalar field from the black hole strongly depends on it.

  6. The High Amplitude delta Scuti Star AD Canis Minoris

    NASA Astrophysics Data System (ADS)

    Axelsen, R. A.; Napier-Munn, T.

    2016-12-01

    The high amplitude delta Scuti star AD Canis Minoris was studied by photoelectric photometry (PEP) during one night in in February 2011 and by digital single lens reflex (DSLR) photometry during seven nights in January and February 2016. Nine light curve peaks were captured, eight of them by DSLR photometry. A review of the literature enabled us to tabulate 109 times of maximum since 1959, to which we added 9 times of maximum from our data, thus creating the largest dataset to date for this star. Assuming a linear ephemeris, the period of AD CMi was calculated to be 0.122974511 (+/- 0.000000004) d, almost identical to that quoted in earlier literature. We constructed an observed minus computed (O-C) diagram which exhibited a quasi-sinusoidal shape, and fitted a weighted model characterised by combined quadratic and trigonometric functions. The fit indicates that the shape of the O-C diagram is attributable to the effects of a slow increase in the pulsation period of AD CMi at a constant rate, and the light time effect of a binary pair, confirming the results from previous authors, and updating most of the coefficients of the equation for the fitted model. The values of all of the coefficients in the function are statistically significant. The rate of increase in the pulsation period of AD CMi was calculated from the entire dataset to be dP/dt = 6.17 (+/- 0.75) x 10-9 d yr-1 or dP/Pdt = 5.01 (+/- 0.61) x 10-8 yr-1.

  7. Application of distribution coefficients to radiological assessment models

    SciTech Connect

    Schell, W.R.; Sanchez, A.L.; Underhill, D.W.; Thomas, E.

    1985-01-01

    A field and laboratory investigation of the transport of fallout radionuclides in natural, organic rich ecosystems has been initiated. Mountain-top peat bogs in Pennsylvania, New York and Virginia were sampled by coring, dated by Pb-210 methods and measured for bomb-produced Sr-90, Pu-239, 240, and Cs-137; laboratory measurements of the distribution coefficients for Cs-137, Sr-85, Ru-106, Am-241, and Co-57 by the constant shaking method have been made. These natural terrestrial ecosystems are labeled with fallout radionuclides from nuclear weapons tests which are environmental tracers of element transport. To explain the differences between the input from fallout and the distribution of Cs-137 in peat cores, a simple ''theoretical plate'' transport model has been used. Each year of growth is assumed to be a ''theoretical plate'' and Cs-137 deposited is transferred between plates by advection and mixing processes. The annual deposition of Cs-137 occurs on the (then) uppermost layer and is proportional to the atmospheric input. The theoretical plate model finds values of the advection and mixing coefficients which give the best fit between Cs-137 profile in the bog and the atmospherically-derived Cs-137. For the three bogs tested so far, the advection coefficients indicate an upward movement of Cs-137 as well as downward transport. Values for the diffusion coefficient range from 10E/sup -7/ to 10E/sup -9/ cm/sup 2/ s/sup -1/ depending on organic content and porosity. The mass transport values from the model are compared to laboratory measurements of distribution coefficients in simulated acid rain conditions. Based on the diffusion coefficients calculated from the model, a thickness of 8 to 20 cm of peat surrounding a leaking cannister of Cs-137 would not allow the radionuclide to enter an aquifer for 300 years from a low level waste disposal site.

  8. Recursive prescription for logarithmic jet rate coefficients

    NASA Astrophysics Data System (ADS)

    Gerwick, Erik

    2013-11-01

    We derive a recursion relation for the analytic leading logarithmic coefficients of a final state gluon cascade. We demonstrate the potential of our method by analytically computing the rate coefficients for the emission of up to 80 gluons in both the exclusive-kt (Durham) and generalized inclusive-kt class of jet algorithms. There is a particularly simple form for the ratios of resolved coefficients. We suggest potential applications for our method including the efficient generation of shower histories.

  9. 46 CFR 45.55 - Freeboard coefficient.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Freeboard coefficient. 45.55 Section 45.55 Shipping... § 45.55 Freeboard coefficient. (a) For ships less than 350 feet in length (L), the freeboard coefficient is P 1 in the formula: P 1=P+A[(L/D)-(L/D s)] where P is a factor, which is a function of...

  10. 46 CFR 45.55 - Freeboard coefficient.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Freeboard coefficient. 45.55 Section 45.55 Shipping... § 45.55 Freeboard coefficient. (a) For ships less than 350 feet in length (L), the freeboard coefficient is P 1 in the formula: P 1=P+A[(L/D)-(L/D s)] where P is a factor, which is a function of...

  11. 46 CFR 45.55 - Freeboard coefficient.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Freeboard coefficient. 45.55 Section 45.55 Shipping... § 45.55 Freeboard coefficient. (a) For ships less than 350 feet in length (L), the freeboard coefficient is P 1 in the formula: P 1=P+A[(L/D)-(L/D s)] where P is a factor, which is a function of...

  12. 46 CFR 45.55 - Freeboard coefficient.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Freeboard coefficient. 45.55 Section 45.55 Shipping... § 45.55 Freeboard coefficient. (a) For ships less than 350 feet in length (L), the freeboard coefficient is P 1 in the formula: P 1=P+A[(L/D)-(L/D s)] where P is a factor, which is a function of...

  13. 46 CFR 45.55 - Freeboard coefficient.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Freeboard coefficient. 45.55 Section 45.55 Shipping... § 45.55 Freeboard coefficient. (a) For ships less than 350 feet in length (L), the freeboard coefficient is P 1 in the formula: P 1=P+A[(L/D)-(L/D s)] where P is a factor, which is a function of...

  14. AdS4/CFT3 squashed, stretched and warped

    NASA Astrophysics Data System (ADS)

    Klebanov, Igor R.; Klose, Thomas; Murugan, Arvind

    2009-03-01

    We use group theoretic methods to calculate the spectrum of short multiplets around the extremum of Script N = 8 gauged supergravity potential which possesses Script N = 2 supersymmetry and SU(3) global symmetry. Upon uplifting to M-theory, it describes a warped product of AdS4 and a certain squashed and stretched 7-sphere. We find quantum numbers in agreement with those of the gauge invariant operators in the Script N = 2 superconformal Chern-Simons theory recently proposed to be the dual of this M-theory background. This theory is obtained from the U(N) × U(N) theory through deforming the superpotential by a term quadratic in one of the superfields. To construct this model explicitly, one needs to employ monopole operators whose complete understanding is still lacking. However, for the U(2) × U(2) gauge theory we make a proposal for the form of the monopole operators which has a number of desired properties. In particular, this proposal implies enhanced symmetry of the U(2) × U(2) ABJM theory for k = 1,2; it makes its similarity to and subtle difference from the BLG theory quite explicit.

  15. The ADS All Sky Survey

    NASA Astrophysics Data System (ADS)

    Goodman, Alyssa

    We will create the first interactive sky map of astronomers' understanding of the Universe over time. We will accomplish this goal by turning the NASA Astrophysics Data System (ADS), widely known for its unrivaled value as a literature resource, into a data resource. GIS and GPS systems have made it commonplace to see and explore information about goings-on on Earth in the context of maps and timelines. Our proposal shows an example of a program that lets a user explore which countries have been mentioned in the New York Times, on what dates, and in what kinds of articles. By analogy, the goal of our project is to enable this kind of exploration-on the sky-for the full corpus of astrophysical literature available through ADS. Our group's expertise and collaborations uniquely position us to create this interactive sky map of the literature, which we call the "ADS All-Sky Survey." To create this survey, here are the principal steps we need to follow. First, by analogy to "geotagging," we will "astrotag," the ADS literature. Many "astrotags" effectively already exist, thanks to curation efforts at both CDS and NED. These efforts have created links to "source" positions on the sky associated with each of the millions of articles in the ADS. Our collaboration with ADS and CDS will let us automatically extract astrotags for all existing and future ADS holdings. The new ADS Labs, which our group helps to develop, includes the ability for researchers to filter article search results using a variety of "facets" (e.g. sources, keywords, authors, observatories, etc.). Using only extracted astrotags and facets, we can create functionality like what is described in the Times example above: we can offer a map of the density of positions' "mentions" on the sky, filterable by the properties of those mentions. Using this map, researchers will be able to interactively, visually, discover what regions have been studied for what reasons, at what times, and by whom. Second, where

  16. Gribov ambiguity in asymptotically AdS three-dimensional gravity

    SciTech Connect

    Anabalon, Andres; Canfora, Fabrizio; Giacomini, Alex; Oliva, Julio

    2011-03-15

    In this paper the zero modes of the de Donder gauge Faddeev-Popov operator for three-dimensional gravity with negative cosmological constant are analyzed. It is found that the AdS{sub 3} vacuum produces (infinitely many) normalizable smooth zero modes of the Faddeev-Popov operator. On the other hand, it is found that the Banados-Teitelboim-Zanelli black hole (including the zero mass black hole) does not generate zero modes. This differs from the usual Gribov problem in QCD where, close to the maximally symmetric vacuum, the Faddeev-Popov determinant is positive definite while 'far enough' from the vacuum it can vanish. This suggests that the zero mass Banados-Teitelboim-Zanelli black hole could be a suitable ground state of three-dimensional gravity with negative cosmological constant. Because of the kinematic origin of this result, it also applies for other covariant gravity theories in three dimensions with AdS{sub 3} as maximally symmetric solution, such as new massive gravity and topologically massive gravity. The relevance of these results for supersymmetry breaking is pointed out.

  17. Micromechanical Oscillating Mass Balance

    NASA Technical Reports Server (NTRS)

    Altemir, David A. (Inventor)

    1997-01-01

    A micromechanical oscillating mass balance and method adapted for measuring minute quantities of material deposited at a selected location, such as during a vapor deposition process. The invention comprises a vibratory composite beam which includes a dielectric layer sandwiched between two conductive layers. The beam is positioned in a magnetic field. An alternating current passes through one conductive layers, the beam oscillates, inducing an output current in the second conductive layer, which is analyzed to determine the resonant frequency of the beam. As material is deposited on the beam, the mass of the beam increases and the resonant frequency of the beam shifts, and the mass added is determined.

  18. Field testing of sound absorption coefficients in a classroom

    NASA Astrophysics Data System (ADS)

    Pettyjohn, Steve

    2005-09-01

    Formal procedures for determining the sound absorption coefficients of materials installed in the field do not exist. However, the U.S. Air Force requested such tests to prove that the sound-absorbing material used in classrooms at Beale AFB in Marysville, CA, met the specified NRC of 0.80. They permitted the use of two layers of 0.5-in. fiberboard or 1-in.-thick fiberglass panels to meet the specified NRC rating. Post-construction tests showed reverberation times longer than expected. Unrealistic sound-absorption coefficients for room finish materials had to be used with the Sabine equation to achieve agreement between the measured and predicted reverberation time. By employing the Fitzroy equation and generally published absorption coefficients for ceiling tile, carpet, and fiberboard, the model provided excellent agreement with the measured reverberation times. The NRC of the fiberboard was computed to be 0.35, agreeing with published data. Since this did not meet project specifications, the Fitzroy model was used to learn the type and quantity of material needed to meet design goals. Follow-up tests showed good agreement between the predicted and measured reverberation times with material added, and project specifications were met. Results are also compared with the requirements of ANSI 12.60.

  19. The AdS/QCD Correspondence and Exclusive Processes

    SciTech Connect

    Brodsky, Stanley J.; de Teramond, Guy F.; Deur, Alexandre; /Jefferson Lab

    2010-08-25

    The AdS/CFT correspondence between theories in AdS space and conformal field theories in physical space-time provides an analytic, semi-classical, color-confining model for strongly-coupled QCD. The soft-wall AdS/QCD model modified by a positive-sign dilaton metric leads to a remarkable one-parameter description of nonperturbative hadron dynamics at zero quark mass, including a zero-mass pion and a Regge spectrum of linear trajectories with the same slope in orbital angular momentum L and radial quantum number n for both mesons and baryons. One also predicts the form of the non-perturbative effective coupling {alpha}{sub s}{sup AdS}(q) and its {beta}-function which agrees with the effective coupling {alpha}{sub ga} extracted from the Bjorken sum rule. Light-front holography, which connects the fifth-dimensional coordinate of AdS space z to an invariant impact separation variable {zeta}, allows one to compute the analytic form of the frame-independent light-front wavefunctions, the fundamental entities which encode hadron properties as well as decay constants, form factors, deeply virtual Compton scattering, exclusive heavy hadron decays and other exclusive scattering amplitudes. One thus obtains a relativistic description of hadrons in QCD at the amplitude level with dimensional counting for hard exclusive reactions at high momentum transfer. As specific examples we discuss the behavior of the pion and nucleon form factors in the space-like and time-like regions. We also review the phenomenology of exclusive processes including some anomalous empirical results.

  20. The inside outs of AdS3/CFT2: exact AdS wormholes with entangled CFT duals

    NASA Astrophysics Data System (ADS)

    Mandal, Gautam; Sinha, Ritam; Sorokhaibam, Nilakash

    2015-01-01

    We present the complete family of solutions of 3D gravity (Λ < 0) with two asymptotically AdS exterior regions. The solutions are constructed from data at the two boundaries, which correspond to two independent and arbitrary stress tensors T R , , and T L , . The two exteriors are smoothly joined on to an interior region through a regular horizon. We find CFT duals of these geometries which are entangled states of two CFT's. We compute correlators between general operators at the two boundaries and find perfect agreement between CFT and bulk calculations. We calculate and match the CFT entanglement entropy (EE) with the holographic EE which involves geodesics passing through the wormhole. We also compute a holographic, non-equilibrium entropy for the CFT using properties of the regular horizon. The construction of the bulk solutions here uses an exact version of Brown-Henneaux type diffeomorphisms which are asymptotically nontrivial and transform the CFT states by two independent unitary operators on the two sides. Our solutions provide an infinite family of explicit examples of the ER=EPR relation of Maldacena and Susskind [1].

  1. Commentary on Coefficient Alpha: A Cautionary Tale

    ERIC Educational Resources Information Center

    Green, Samuel B.; Yang, Yanyun

    2009-01-01

    The general use of coefficient alpha to assess reliability should be discouraged on a number of grounds. The assumptions underlying coefficient alpha are unlikely to hold in practice, and violation of these assumptions can result in nontrivial negative or positive bias. Structural equation modeling was discussed as an informative process both to…

  2. Implications of NGA for NEHRP site coefficients

    USGS Publications Warehouse

    Borcherdt, Roger D.

    2012-01-01

    Three proposals are provided to update tables 11.4-1 and 11.4-2 of Minimum Design Loads for Buildings and Other Structures (7-10), by the American Society of Civil Engineers (2010) (ASCE/SEI 7-10), with site coefficients implied directly by NGA (Next Generation Attenuation) ground motion prediction equations (GMPEs). Proposals include a recommendation to use straight-line interpolation to infer site coefficients at intermediate values of ̅vs (average shear velocity). Site coefficients are recommended to ensure consistency with ASCE/SEI 7-10 MCER (Maximum Considered Earthquake) seismic-design maps and simplified site-specific design spectra procedures requiring site classes with associated tabulated site coefficients and a reference site class with unity site coefficients. Recommended site coefficients are confirmed by independent observations of average site amplification coefficients inferred with respect to an average ground condition consistent with that used for the MCER maps. The NGA coefficients recommended for consideration are implied directly by the NGA GMPEs and do not require introduction of additional models.

  3. Coefficient Alpha and Reliability of Scale Scores

    ERIC Educational Resources Information Center

    Almehrizi, Rashid S.

    2013-01-01

    The majority of large-scale assessments develop various score scales that are either linear or nonlinear transformations of raw scores for better interpretations and uses of assessment results. The current formula for coefficient alpha (a; the commonly used reliability coefficient) only provides internal consistency reliability estimates of raw…

  4. Decay of (p,q)-Fourier coefficients.

    PubMed

    Edmunds, David E; Gurka, Petr; Lang, Jan

    2014-10-08

    We show that essentially the speed of decay of the Fourier sine coefficients of a function in a Lebesgue space is comparable to that of the corresponding coefficients with respect to the basis formed by the generalized sine functions sin p,q .

  5. A gain-coefficient switched Alexandrite laser

    NASA Astrophysics Data System (ADS)

    Lee, Chris J.; van der Slot, Peter J. M.; Boller, Klaus-J.

    2013-01-01

    We report on a gain-coefficient switched Alexandrite laser. An electro-optic modulator is used to switch between high and low gain states by making use of the polarization dependent gain of Alexandrite. In gain-coefficient switched mode, the laser produces 85 ns pulses with a pulse energy of 240 mJ at a repetition rate of 5 Hz.

  6. Coefficient Alpha Bootstrap Confidence Interval under Nonnormality

    ERIC Educational Resources Information Center

    Padilla, Miguel A.; Divers, Jasmin; Newton, Matthew

    2012-01-01

    Three different bootstrap methods for estimating confidence intervals (CIs) for coefficient alpha were investigated. In addition, the bootstrap methods were compared with the most promising coefficient alpha CI estimation methods reported in the literature. The CI methods were assessed through a Monte Carlo simulation utilizing conditions…

  7. Calculator program set up for film coefficients

    SciTech Connect

    Gracey, J.O.; Teter, D.L.

    1982-11-15

    Describes a mechanized computation scheme for the film coefficients used in heat transfer calculations designed for the Texas Instruments TI-59 programmable calculator. Presents tables showing application conditions (small diagram included) and the corresponding heat transfer equations for 10 heat flow situations; symbols used; user instructions, a complete film coefficient program; and storage assignments. Example problem and corresponding printout are given.

  8. Meta-Analysis of Coefficient Alpha

    ERIC Educational Resources Information Center

    Rodriguez, Michael C.; Maeda, Yukiko

    2006-01-01

    The meta-analysis of coefficient alpha across many studies is becoming more common in psychology by a methodology labeled reliability generalization. Existing reliability generalization studies have not used the sampling distribution of coefficient alpha for precision weighting and other common meta-analytic procedures. A framework is provided for…

  9. Estimation of the simple correlation coefficient.

    PubMed

    Shieh, Gwowen

    2010-11-01

    This article investigates some unfamiliar properties of the Pearson product-moment correlation coefficient for the estimation of simple correlation coefficient. Although Pearson's r is biased, except for limited situations, and the minimum variance unbiased estimator has been proposed in the literature, researchers routinely employ the sample correlation coefficient in their practical applications, because of its simplicity and popularity. In order to support such practice, this study examines the mean squared errors of r and several prominent formulas. The results reveal specific situations in which the sample correlation coefficient performs better than the unbiased and nearly unbiased estimators, facilitating recommendation of r as an effect size index for the strength of linear association between two variables. In addition, related issues of estimating the squared simple correlation coefficient are also considered.

  10. An agreement coefficient for image comparison

    USGS Publications Warehouse

    Ji, L.; Gallo, K.

    2006-01-01

    Combination of datasets acquired from different sensor systems is necessary to construct a long time-series dataset for remotely sensed land-surface variables. Assessment of the agreement of the data derived from various sources is an important issue in understanding the data continuity through the time-series. Some traditional measures, including correlation coefficient, coefficient of determination, mean absolute error, and root mean square error, are not always optimal for evaluating the data agreement. For this reason, we developed a new agreement coefficient for comparing two different images. The agreement coefficient has the following properties: non-dimensional, bounded, symmetric, and distinguishable between systematic and unsystematic differences. The paper provides examples of agreement analyses for hypothetical data and actual remotely sensed data. The results demonstrate that the agreement coefficient does include the above properties, and therefore is a useful tool for image comparison. ?? 2006 American Society for Photogrammetry and Remote Sensing.

  11. Accommodation coefficient of HOBr on deliquescent sodium bromide aerosol particles

    NASA Astrophysics Data System (ADS)

    Wachsmuth, M.; Gäggeler, H. W.; von Glasow, R.; Ammann, M.

    2002-06-01

    Uptake of HOBr on sea salt aerosol, sea salt brine or ice is believed to be a key process providing a source of photolabile bromine (Br2) and sustaining ozone depletion cycles in the Arctic troposphere. In the present study, uptake of HOBr on sodium bromide (NaBr) aerosol particles was investigated at an extremely low HOBr concentration of 300 cm-3 using the short-lived radioactive isotopes 83-86Br. Under these conditions, at maximum one HOBr molecule was taken up per particle. The rate of uptake was clearly limited by the mass accommodation coefficient, which was calculated to be 0.6 ± 0.2. This value is a factor of 10 larger than estimates used in earlier models. The atmospheric implications are discussed using the box model "MOCCA'', showing that the increase of the accommodation coefficient of HOBr by a factor of 10 only slightly affects net ozone loss, but significantly increases chlorine release.

  12. Path Flow Estimation Using Time Varying Coefficient State Space Model

    NASA Astrophysics Data System (ADS)

    Jou, Yow-Jen; Lan, Chien-Lun

    2009-08-01

    The dynamic path flow information is very crucial in the field of transportation operation and management, i.e., dynamic traffic assignment, scheduling plan, and signal timing. Time-dependent path information, which is important in many aspects, is nearly impossible to be obtained. Consequently, researchers have been seeking estimation methods for deriving valuable path flow information from less expensive traffic data, primarily link traffic counts of surveillance systems. This investigation considers a path flow estimation problem involving the time varying coefficient state space model, Gibbs sampler, and Kalman filter. Numerical examples with part of a real network of the Taipei Mass Rapid Transit with real O-D matrices is demonstrated to address the accuracy of proposed model. Results of this study show that this time-varying coefficient state space model is very effective in the estimation of path flow compared to time-invariant model.

  13. Mass Transport within Soils

    SciTech Connect

    McKone, Thomas E.

    2009-03-01

    with three major horizons, the saturated zone can be further divided into other zones based on hydraulic and geologic conditions. Wetland soils are a special and important class in which near-saturation conditions exist most of the time. When a contaminant is added to or formed in a soil column, there are several mechanisms by which it can be dispersed, transported out of the soil column to other parts of the environment, destroyed, or transformed into some other species. Thus, to evaluate or manage any contaminant introduced to the soil column, one must determine whether and how that substance will (1) remain or accumulate within the soil column, (2) be transported by dispersion or advection within the soil column, (3) be physically, chemically, or biologically transformed within the soil (i.e., by hydrolysis, oxidation, etc.), or (4) be transported out of the soil column to another part of the environment through a cross-media transfer (i.e., volatilization, runoff, ground water infiltration, etc.). These competing processes impact the fate of physical, chemical, or biological contaminants found in soils. In order to capture these mechanisms in mass transfer models, we must develop mass-transfer coefficients (MTCs) specific to soil layers. That is the goal of this chapter. The reader is referred to other chapters in this Handbook that address related transport processes, namely Chapter 13 on bioturbation, Chapter 15 on transport in near-surface geological formations, and Chapter 17 on soil resuspention. This chapter addresses the following issues: the nature of soil pollution, composition of soil, transport processes and transport parameters in soil, transformation processes in soil, mass-balance models, and MTCs in soils. We show that to address vertical heterogeneity in soils in is necessary to define a characteristic scaling depth and use this to establish process-based expressions for soil MTCs. The scaling depth in soil and the corresponding MTCs depend strongly

  14. Thermodiffusion, molecular diffusion and Soret coefficients of aromatic+n-alkane binary mixtures

    NASA Astrophysics Data System (ADS)

    Larrañaga, Miren; Bou-Ali, M. Mounir; Lapeira, Estela; Lizarraga, Ion; Santamaría, Carlos

    2016-10-01

    In the present work, we have measured the thermodiffusion coefficient of 51 binary liquid mixtures at 25 oC. These mixtures correspond to the series of the aromatics toluene and 1-methylnaphthalene with n-alkanes nCi (i = 6, 8, 10, 12, and 14) at different mass fractions in the whole range. For that, we have used the thermogravitational technique. It is shown that the thermodiffusion coefficient is a linear function of the mass fraction in all the mixtures. Extrapolating the lines, we obtain the thermodiffusion coefficient in dilute solutions of n-alkanes for both toluene and 1-methylnaphthalene. These limiting values show a linear dependence with the inverse of the product of the molecular weights. In addition, we have measured the molecular diffusion coefficient of all the mixtures at 0.5 of mass fraction and at 25 oC, by the sliding symmetric tubes technique. It is observed that the product of this coefficient with the viscosity at the same concentrations takes a constant value for each of the series considered. Finally, we have also determined the Soret coefficient of the equimass mixtures by the combination of the measurements of thermodiffusion and molecular diffusion coefficients.

  15. AD, the ALICE diffractive detector

    NASA Astrophysics Data System (ADS)

    Tello, Abraham Villatoro

    2017-03-01

    ALICE is one of the four large experiments at the CERN Large Hadron Collider (LHC). As a complement to its Heavy-Ion physics program, ALICE started during Run 1 of LHC an extensive program dedicated to the study of proton-proton diffractive processes. In order to optimize its trigger efficiencies and purities in selecting diffractive events, the ALICE Collaboration installed a very forward AD detector during the Long Shut Down 1 of LHC. This new forward detector system consists of two stations made of two layers of scintillator pads, one station on each side of the interaction point. With this upgrade, ALICE has substantially increased its forward physics coverage, including the double rapidity gap based selection of central production, as well as the measurements of inclusive diffractive cross sections.

  16. Methane Absorption Coefficients for the Jovian Planets and Titan

    NASA Astrophysics Data System (ADS)

    Karkoschka, Erich; Tomasko, M. G.

    2009-09-01

    We combined 11 data sets of methane transmission measurements within 0.4-5.5 micrometer wavelength in order to better understand the variation of methane absorption with temperature and pressure for conditions in the atmospheres of the Jovian planets and Titan. Eight data sets are based on published laboratory measurements. Another two data sets come from two spectrometers onboard the Huygens probe that measured methane absorption inside Titan's atmosphere (Tomasko et al. 2008, PSS 56, 624). We present the data with a refined analysis. The last data set consists of Hubble Space Telescope images of Jupiter taken in 2005 and 2007 as Ganymede started to be occulted by Jupiter. Using Ganymede as a light source, we probed Jupiter's stratosphere with large methane pathlengths. Below 1000 nm wavelength, we find methane absorption coefficients generally similar to those by Karkoschka (1998, Icarus 133, 134). We added descriptions of temperature and pressure dependence, which are typically small in this wavelength range. Data in this wavelength range are consistent with each other, except between 882 and 902 nm wavelength where laboratory data predict larger absorptions in the Jovian atmospheres than observed. We present possible explanations. Above 1000 nm, our analysis of the Huygens data confirms methane absorption coefficients by Irwin et al. (2006, Icarus 181, 309) at their laboratory temperatures. Huygens data are consistent with Irwin's model of the pressure dependence of methane absorption. However, when large extrapolations were needed, such as from laboratory data above 200 K to Titan's temperatures near 80 K, Irwin's model of temperature dependence predicts absorption coefficients up to 100 times lower than measured by Huygens. We combined Irwin's and Huygens' data to obtain more reliable methane absorption coefficients for the temperatures in the atmospheres of the Jovian planets and Titan. This research was supported by NASA grants NAG5-12014 and NNX08AE74G.

  17. Theoretical calculation of Joule-Thomson coefficient by using third virial coefficient

    NASA Astrophysics Data System (ADS)

    Mamedov, Bahtiyar Akber; Somuncu, Elif; Askerov, Iskender M.

    2017-02-01

    The Joule-Thomson coefficient has been theoretical investigated by using third virial coefficient. Established expressions enable us accurate and rapid calculations of Joule-Thomson coefficient. As seen from numerical results the analytical expressions for third virial coefficients are a very useful, giving a very fast method to calculate other thermodynamics properties of gasses. As an example, the calculation results have been successfully tested by using various literature data.

  18. Path-counting formulas for generalized kinship coefficients and condensed identity coefficients.

    PubMed

    Cheng, En; Ozsoyoglu, Z Meral

    2014-01-01

    An important computation on pedigree data is the calculation of condensed identity coefficients, which provide a complete description of the degree of relatedness of two individuals. The applications of condensed identity coefficients range from genetic counseling to disease tracking. Condensed identity coefficients can be computed using linear combinations of generalized kinship coefficients for two, three, four individuals, and two pairs of individuals and there are recursive formulas for computing those generalized kinship coefficients (Karigl, 1981). Path-counting formulas have been proposed for the (generalized) kinship coefficients for two (three) individuals but there have been no path-counting formulas for the other generalized kinship coefficients. It has also been shown that the computation of the (generalized) kinship coefficients for two (three) individuals using path-counting formulas is efficient for large pedigrees, together with path encoding schemes tailored for pedigree graphs. In this paper, we propose a framework for deriving path-counting formulas for generalized kinship coefficients. Then, we present the path-counting formulas for all generalized kinship coefficients for which there are recursive formulas and which are sufficient for computing condensed identity coefficients. We also perform experiments to compare the efficiency of our method with the recursive method for computing condensed identity coefficients on large pedigrees.

  19. Evaluation of Dimensionality in the Assessment of Internal Consistency Reliability: Coefficient Alpha and Omega Coefficients

    ERIC Educational Resources Information Center

    Green, Samuel B.; Yang, Yanyun

    2015-01-01

    In the lead article, Davenport, Davison, Liou, & Love demonstrate the relationship among homogeneity, internal consistency, and coefficient alpha, and also distinguish among them. These distinctions are important because too often coefficient alpha--a reliability coefficient--is interpreted as an index of homogeneity or internal consistency.…

  20. Soccer ball lift coefficients via trajectory analysis

    NASA Astrophysics Data System (ADS)

    Goff, John Eric; Carré, Matt J.

    2010-07-01

    We performed experiments in which a soccer ball was launched from a machine while two high-speed cameras recorded portions of the trajectory. Using the trajectory data and published drag coefficients, we extracted lift coefficients for a soccer ball. We determined lift coefficients for a wide range of spin parameters, including several spin parameters that have not been obtained by today's wind tunnels. Our trajectory analysis technique is not only a valuable tool for professional sports scientists, it is also accessible to students with a background in undergraduate-level classical mechanics.

  1. Spatial correlation coefficient images for ultrasonic detection.

    PubMed

    Cepel, Raina; Ho, K C; Rinker, Brett A; Palmer, Donald D; Lerch, Terrence P; Neal, Steven P

    2007-09-01

    In ultrasonics, image formation and detection are generally based on signal amplitude. In this paper, we introduce correlation coefficient images as a signal-amplitude independent approach for image formation. The correlation coefficients are calculated between A-scans digitized at adjacent measurement positions. In these images, defects are revealed as regions of high or low correlation relative to the background correlations associated with noise. Correlation coefficient and C-scan images are shown to demonstrate flat-bottom-hole detection in a stainless steel annular ring and crack detection in an aluminum aircraft structure.

  2. On the emission coefficient of uranium plasmas.

    NASA Technical Reports Server (NTRS)

    Schneider, R. T.; Campbell, H. D.; Mack, J. M.

    1973-01-01

    The emission coefficient for uranium plasmas (temperature: 8000 K) was measured for the wavelength range from 1200 to 6000 A. The results were compared to theoretical calculations and other measurements. Reasonable agreement between theoretical predictions and our measurements was found in the region from 1200 to 2000 A. Although it was difficult to make absolute comparisons among the different reported measurements, considerable disagreement was found for the higher wavelength region. A short discussion regarding the overall comparisons is given, and final suggestions are made as to the most appropriate emission coefficient values to be used in future design calculations. The absorption coefficient for the same wavelength interval is also reported.

  3. Diffusion coefficients in leaflets of bilayer membranes.

    PubMed

    Seki, Kazuhiko; Mogre, Saurabh; Komura, Shigeyuki

    2014-02-01

    We study diffusion coefficients of liquid domains by explicitly taking into account the two-layered structure called leaflets of the bilayer membrane. In general, the velocity fields associated with each leaflet are different and the layers sliding past each other cause frictional coupling. We obtain analytical results of diffusion coefficients for a circular liquid domain in a leaflet, and quantitatively study their dependence on the interleaflet friction. We also show that the diffusion coefficients diverge in the absence of coupling between the bilayer and solvents, even when the interleaflet friction is taken into account. In order to corroborate our theory, the effect of the interleaflet friction on the correlated diffusion is examined.

  4. Spreading coefficients of aliphatic hydrocarbons on water

    SciTech Connect

    Takii, Taichi; Mori, Y.H. . Dept. of Mechanical Engineering)

    1993-11-01

    Experiments have been performed to determine the equilibrium spreading coefficients of some aliphatic hydrocarbons (C[sub 6]C[sub 10]) on water. The thickness of a discrete lens of each hydrocarbon sample floating on a stagnant water pool was measured interferometrically and used to calculate the spreading coefficient of the hydrocarbon with the aid of Langmuir's capillarity theory. The dependences of the spreading coefficient, thus observed, on temperature (0--50 C) and on the number of carbon atoms in the hydrocarbon molecule are in qualitative agreement with the predictions based on the Lifshitz theory of van der Waals forces.

  5. Calculation of electronic transport coefficients of Ag and Au plasma

    SciTech Connect

    Apfelbaum, E. M.

    2011-12-15

    The thermoelectric transport coefficients of silver and gold plasma have been calculated within the relaxation-time approximation. We considered temperatures of 10-100 kK and densities of {rho} < or approx. 1 g/cm{sup 3}. The plasma composition was calculated using a corresponding system of coupled mass action laws, including the atom ionization up to +4. For momentum cross sections of electron-atom scattering we used the most accurate expressions available. The results of our modeling have been compared with other researchers' data whenever possible.

  6. A method for monitoring nuclear absorption coefficients of aviation fuels

    NASA Technical Reports Server (NTRS)

    Sprinkle, Danny R.; Shen, Chih-Ping

    1989-01-01

    A technique for monitoring variability in the nuclear absorption characteristics of aviation fuels has been developed. It is based on a highly collimated low energy gamma radiation source and a sodium iodide counter. The source and the counter assembly are separated by a geometrically well-defined test fuel cell. A computer program for determining the mass attenuation coefficient of the test fuel sample, based on the data acquired for a preset counting period, has been developed and tested on several types of aviation fuel.

  7. The New York Times ad.

    PubMed

    Hunt, M E; Kissling, F

    1993-01-01

    Feminization of patriarchal institutions is necessary in order to eliminate the exclusivity and mutuality of hierarchical, gender, class, and race stratification. The aim of this paper is to explain the history and activities surrounding the New York Times ad on Sunday, October 7, 1984 (the Catholic Statement on Pluralism and Abortion signed by Barbara Ferraro and Patricia Hussey of the Sisters of Note Dame de Namur, Rose Dominic Trapasso of the Maryknoll Sisters, and 67 other signers). The significance of this ad for Roman Catholic feminists and suggestions for new models of relationships between feminists is given. The Statement was written by Daniel Maguire and Frances Kissling and reviewed by 20 Roman Catholic ethicists. A sponsoring committee of early signers sought other support. Catholics for a Free Choice sponsored the funding for circulation of the Statement among professional societies, but not necessarily canonical communities. Publication of the entire statement in the Times was at the height of the presidential campaign. Conservative Bishops Bernard Law of Boston and John O'Connor of Boston publicly denounced Ferraro's position. The first institutional church response came on November 14, 1984, and stated that the Statement was personal opinion and contradictory to clear and constant church teachings about abortion. On November 30, 1984, Cardinal Jean Jerome Hamer of the Congregation for Religious and Secular Institutes responded to most presidents of canonical communities to request a public retraction from signers under threat of dismissal. The issue was obedience to the church. Several members of the canonical community and priests published retractions; negotiations with the Vatican began. Freedom of conscience and empowerment of canonical communities, as agents of their own lives, were given as reasons for the challenge to paternalism. The response was that women were subject to obedience within their communities and had taken public vows and were

  8. Friction coefficient dependence on electrostatic tribocharging

    NASA Astrophysics Data System (ADS)

    Burgo, Thiago A. L.; Silva, Cristiane A.; Balestrin, Lia B. S.; Galembeck, Fernando

    2013-08-01

    Friction between dielectric surfaces produces patterns of fixed, stable electric charges that in turn contribute electrostatic components to surface interactions between the contacting solids. The literature presents a wealth of information on the electronic contributions to friction in metals and semiconductors but the effect of triboelectricity on friction coefficients of dielectrics is as yet poorly defined and understood. In this work, friction coefficients were measured on tribocharged polytetrafluoroethylene (PTFE), using three different techniques. As a result, friction coefficients at the macro- and nanoscales increase many-fold when PTFE surfaces are tribocharged, but this effect is eliminated by silanization of glass spheres rolling on PTFE. In conclusion, tribocharging may supersede all other contributions to macro- and nanoscale friction coefficients in PTFE and probably in other insulating polymers.

  9. Universal relations of transport coefficients from holography

    SciTech Connect

    Cherman, Aleksey; Nellore, Abhinav

    2009-09-15

    We show that there are universal high-temperature relations for transport coefficients of plasmas described by a wide class of field theories with gravity duals. These theories can be viewed as strongly coupled large-N{sub c} conformal field theories deformed by one or more relevant operators. The transport coefficients we study are the speed of sound and bulk viscosity, as well as the conductivity, diffusion coefficient, and charge susceptibility of probe U(1) charges. We show that the sound bound v{sub s}{sup 2}{<=}1/3 is satisfied at high temperatures in these theories and also discuss bounds on the diffusion coefficient, the conductivity, and the bulk viscosity.

  10. Second virial coefficient of one dimensional gas

    SciTech Connect

    Mijatovic, M.

    1982-08-01

    The second virial coefficient of a one dimensional gas is calculated using the expressions for the scattering amplitude. The scattering amplitude is chosen in the form of rational function of wave vector.

  11. Heat transfer coefficient of cryotop during freezing.

    PubMed

    Li, W J; Zhou, X L; Wang, H S; Liu, B L; Dai, J J

    2013-01-01

    Cryotop is an efficient vitrification method for cryopreservation of oocytes. It has been widely used owing to its simple operation and high freezing rate. Recently, the heat transfer performance of cryotop was studied by numerical simulation in several studies. However, the range of heat transfer coefficient in the simulation is uncertain. In this study, the heat transfer coefficient for cryotop during freezing process was analyzed. The cooling rates of 40 percent ethylene glycol (EG) droplet in cryotop during freezing were measured by ultra-fast measurement system and calculated by numerical simulation at different value of heat transfer coefficient. Compared with the results obtained by two methods, the range of the heat transfer coefficient necessary for the numerical simulation of cryotop was determined, which is between 9000 W/(m(2)·K) and 10000 W/(m (2)·K).

  12. Friction coefficient dependence on electrostatic tribocharging.

    PubMed

    Burgo, Thiago A L; Silva, Cristiane A; Balestrin, Lia B S; Galembeck, Fernando

    2013-01-01

    Friction between dielectric surfaces produces patterns of fixed, stable electric charges that in turn contribute electrostatic components to surface interactions between the contacting solids. The literature presents a wealth of information on the electronic contributions to friction in metals and semiconductors but the effect of triboelectricity on friction coefficients of dielectrics is as yet poorly defined and understood. In this work, friction coefficients were measured on tribocharged polytetrafluoroethylene (PTFE), using three different techniques. As a result, friction coefficients at the macro- and nanoscales increase many-fold when PTFE surfaces are tribocharged, but this effect is eliminated by silanization of glass spheres rolling on PTFE. In conclusion, tribocharging may supersede all other contributions to macro- and nanoscale friction coefficients in PTFE and probably in other insulating polymers.

  13. Transonic Blunt Body Aerodynamic Coefficients Computation

    NASA Astrophysics Data System (ADS)

    Sancho, Jorge; Vargas, M.; Gonzalez, Ezequiel; Rodriguez, Manuel

    2011-05-01

    In the framework of EXPERT (European Experimental Re-entry Test-bed) accurate transonic aerodynamic coefficients are of paramount importance for the correct trajectory assessment and parachute deployment. A combined CFD (Computational Fluid Dynamics) modelling and experimental campaign strategy was selected to obtain accurate coefficients. A preliminary set of coefficients were obtained by CFD Euler inviscid computation. Then experimental campaign was performed at DNW facilities at NLR. A profound review of the CFD modelling was done lighten up by WTT results, aimed to obtain reliable values of the coefficients in the future (specially the pitching moment). Study includes different turbulence modelling and mesh sensitivity analysis. Comparison with the WTT results is explored, and lessons learnt are collected.

  14. Intracellular Signaling and Desmoglein 2 Shedding Triggered by Human Adenoviruses Ad3, Ad14, and Ad14P1

    PubMed Central

    Wang, Hongjie; Ducournau, Corinne; Saydaminova, Kamola; Richter, Maximilian; Yumul, Roma; Ho, Martin; Carter, Darrick; Zubieta, Chloé

    2015-01-01

    ABSTRACT We recently discovered that desmoglein 2 (DSG2) is a receptor for human adenovirus species B serotypes Ad3, Ad7, Ad11, and Ad14. Ad3 is considered to be a widely distributed human pathogen. Ad3 binding to DSG2 triggers the transient opening of epithelial junctions. Here, we further delineate the mechanism that leads to DSG2-mediated epithelial junction opening in cells exposed to Ad3 and recombinant Ad3 fiber proteins. We identified an Ad3 fiber knob-dependent pathway that involves the phosphorylation of mitogen-activated protein (MAP) kinases triggering the activation of the matrix-metalloproteinase ADAM17. ADAM17, in turn, cleaves the extracellular domain of DSG2 that links epithelial cells together. The shed DSG2 domain can be detected in cell culture supernatant and also in serum of mice with established human xenograft tumors. We then extended our studies to Ad14 and Ad14P1. Ad14 is an important research and clinical object because of the recent appearance of a new, more pathogenic strain (Ad14P1). In a human epithelial cancer xenograft model, Ad14P1 showed more efficient viral spread and oncolysis than Ad14. Here, we tested the hypothesis that a mutation in the Ad14P1 fiber knob could account for the differences between the two strains. While our X-ray crystallography studies suggested an altered three-dimensional (3D) structure of the Ad14P1 fiber knob in the F-G loop region, this did not significantly change the fiber knob affinity to DSG2 or the intracellular signaling and DSG2 shedding in epithelial cancer cells. IMPORTANCE A number of widely distributed adenoviruses use the epithelial junction protein DSG2 as a receptor for infection and lateral spread. Interaction with DSG2 allows the virus not only to enter cells but also to open epithelial junctions which form a physical barrier to virus spread. Our study elucidates the mechanism beyond virus-triggered junction opening with a focus on adenovirus serotype 3. Ad3 binds to DSG2 with its fiber

  15. Condom ads promote illicit sex.

    PubMed

    Kippley, J F

    1994-01-01

    Written in 1987, this opinion was republished in the wake of US President Bill Clinton's AIDS prevention media campaign promoting condom use which began January 1994, targeted at young adults aged 18-25. The author staunchly opposes condom use even though he admits that people do not consider abstinence from sex to be a serious option for the prevention of HIV/STD infection. He believes that there is no moral use of sex with a condom and that condoms have always been a sign of immorality, be it prostitution, adultery, fornication, or marital contraception. Likewise, the author laments the success enjoyed by Planned Parenthood in achieving the social acceptance of marital contraception and sex outside of marriage. The complete social acceptance of homosexual activity, however, remains to be achieved. Magazines, newspapers, and television receive income in exchange for publishing or airing advertisements. Finding offensive advertisements which promote the use of condoms against HIV infection, the author recommends writing letters of complaint to the responsible media sources. If the television stations or publications in question continue to advertise condoms to the public, stop watching them or end one's subscriptions to the particular printed media. Such action taken collectively among many individuals will reduce product sales and income, and potentially sway corporate policy against condom ads.

  16. Absorption coefficient instrument for turbid natural waters.

    PubMed

    Friedman, E; Poole, L; Cherdak, A; Houghton, W

    1980-05-15

    An instrument has been developed that directly measures the multispectral absorption coefficient of turbid natural water. The design incorporates methods for compensation of variation in the internal light source intensity, correction of the spectrally dependent nature of the optical elements, and correction for variation in background light level. When used in conjunction with a spectrally matched total attenuation instrument, the spectrally dependent scattering coefficient can also be derived. Systematic errors associated with multiple scattering have been estimated using Monte Carlo techniques.

  17. 16 CFR 460.18 - Insulation ads.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... INSULATION § 460.18 Insulation ads. (a) If your ad gives an R-value, you must give the type of insulation and... your ad gives a price, you must give the type of insulation, the R-value at a specific thickness, the... you give the price per square foot, you do not have to give the coverage area. (c) If your ad...

  18. 16 CFR 460.18 - Insulation ads.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... INSULATION § 460.18 Insulation ads. (a) If your ad gives an R-value, you must give the type of insulation and... your ad gives a price, you must give the type of insulation, the R-value at a specific thickness, the... you give the price per square foot, you do not have to give the coverage area. (c) If your ad...

  19. Myths & Facts about Value-Added Analysis

    ERIC Educational Resources Information Center

    TNTP, 2011

    2011-01-01

    This paper presents myths as well as facts about value-added analysis. These myths include: (1) "Value-added isn't fair to teachers who work in high-need schools, where students tend to lag far behind academically"; (2) "Value-added scores are too volatile from year-to-year to be trusted"; (3) "There's no research behind value-added"; (4) "Using…

  20. Antifungal activity by vapor contact of essential oils added to amaranth, chitosan, or starch edible films.

    PubMed

    Avila-Sosa, Raúl; Palou, Enrique; Jiménez Munguía, María Teresa; Nevárez-Moorillón, Guadalupe Virginia; Navarro Cruz, Addí Rhode; López-Malo, Aurelio

    2012-02-01

    Antimicrobial agents can be incorporated into edible films to provide microbiological stability, since films can be used as carriers of a variety of additives to extend product shelf life and reduce the risk of microbial growth on food surfaces. Addition of antimicrobial agents to edible films offers advantages such as the use of small antimicrobial concentrations and low diffusion rates. The aim of this study was to evaluate inhibition by vapor contact of Aspergillus niger and Penicillium digitatum by selected concentrations of Mexican oregano (Lippia berlandieri Schauer), cinnamon (Cinnamomum verum) or lemongrass (Cymbopogon citratus) essential oils (EOs) added to amaranth, chitosan, or starch edible films. Essential oils were characterized by gas chromatography-mass spectrometry (GC/MS) analysis. Amaranth, chitosan and starch edible films were formulated with essential oil concentrations of 0.00, 0.25, 0.50, 0.75, 1.00, 2.00, or 4.00%. Antifungal activity was evaluated by determining the mold radial growth on agar media inoculated with A. niger and P. digitatum after exposure to vapors arising from essential oils added to amaranth, chitosan or starch films using the inverted lid technique. The modified Gompertz model adequately described mold growth curves (mean coefficient of determination 0.991 ± 0.05). Chitosan films exhibited better antifungal effectiveness (inhibition of A. niger with 0.25% of Mexican oregano and cinnamon EO; inhibition of P. digitatum with 0.50% EOs) than amaranth films (2.00 and 4.00% of cinnamon and Mexican oregano EO were needed to inhibit the studied molds, respectively). For chitosan and amaranth films a significant increase (p<0.05) of lag phase was observed among film concentrations while a significant decrease (p<0.05) of maximum specific growth was determined. Chitosan edible films incorporating Mexican oregano or cinnamon essential oil could improve the quality of foods by the action of the volatile compounds on surface growth

  1. Concordance correlation coefficient applied to discrete data.

    PubMed

    Carrasco, Josep L; Jover, Lluis

    2005-12-30

    In any field in which decisions are subject to measurements, interchangeability between the methods used to obtain these measurements is essential. To consider methods as interchangeable, a certain degree of agreement is needed between the measurements they provide. The concordance correlation coefficient is an index that assesses the strength of agreement and it has been widely applied in situations in which measurements are made on a continuous scale. Recently the concordance correlation coefficient has been defined as a specific intraclass correlation coefficient estimated by the variance components of a Normal-Normal mixed linear model. Although this coefficient was defined for the continuous scale case, it may also be used with a discrete scale. In this case the data are often transformed and normalized, and the concordance correlation is applied. This study discusses the expression of the concordance correlation coefficient for discrete Poisson data by means of the Poisson-Normal generalized linear mixed model. The behaviour of the concordance correlation coefficient estimate is assessed by means of a simulation study, in which the estimates were compared using four models: three Normal-Normal mixed models with raw data, log-transformed data and square-root transformed data, and the Poisson-Normal generalized linear mixed model. An example is provided in which two different methods are used to measure CD34+ cells.

  2. New Features in the ADS Abstract Service

    NASA Technical Reports Server (NTRS)

    Eichhorn, Guenther; Accomazzi, Alberto; Grant, Carolyn S.; Kurtz, Michael J.; Henneken, Edwin A.; Thompson, Donna M.; Murray, Stephen S.

    2005-01-01

    The NASA-ADS Abstract Service provides a sophisticated search capability for the literature in Astronomy, Planetary Sciences, Physics/Geophysics, and Space Instrumentation. The ADS is funded by NASA and access to the ADS services is free to anybody world-wide without restrictions. It allows the user to search the literature by author, title, and abstract text.

  3. 27 CFR 19.456 - Adding denaturants.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Adding denaturants. 19.456... Denaturation § 19.456 Adding denaturants. Denaturants and spirits shall be mixed in packages, tanks, or bulk... proprietor shall submit a flow diagram of the intended process or method of adding denaturants. (Sec....

  4. Weighing the Claims in Diet Ads

    MedlinePlus

    ... página en español Weighing the Claims in Diet Ads Related Items Weight Loss Challenge Diet Ads and ... control Information Network .  The Truth Behind Weight Loss Ads Claims to watch out for include: Lose weight ...

  5. Metabolic control analysis using transient metabolite concentrations. Determination of metabolite concentration control coefficients.

    PubMed Central

    Delgado, J; Liao, J C

    1992-01-01

    The methodology previously developed for determining the Flux Control Coefficients [Delgado & Liao (1992) Biochem. J. 282, 919-927] is extended to the calculation of metabolite Concentration Control Coefficients. It is shown that the transient metabolite concentrations are related by a few algebraic equations, attributed to mass balance, stoichiometric constraints, quasi-equilibrium or quasi-steady states, and kinetic regulations. The coefficients in these relations can be estimated using linear regression, and can be used to calculate the Control Coefficients. The theoretical basis and two examples are discussed. Although the methodology is derived based on the linear approximation of enzyme kinetics, it yields reasonably good estimates of the Control Coefficients for systems with non-linear kinetics. PMID:1497632

  6. Temperature effects on diffusion coefficient for 6-gingerol and 6-shogaol in subcritical water extraction

    NASA Astrophysics Data System (ADS)

    Ilia Anisa, Nor; Azian, Noor; Sharizan, Mohd; Iwai, Yoshio

    2014-04-01

    6-gingerol and 6-shogaol are the main constituents as anti-inflammatory or bioactive compounds from zingiber officinale Roscoe. These bioactive compounds have been proven for inflammatory disease, antioxidatives and anticancer. The effect of temperature on diffusion coefficient for 6-gingerol and 6-shogaol were studied in subcritical water extraction. The diffusion coefficient was determined by Fick's second law. By neglecting external mass transfer and solid particle in spherical form, a linear portion of Ln (1-(Ct/Co)) versus time was plotted in determining the diffusion coefficient. 6-gingerol obtained the higher yield at 130°C with diffusion coefficient of 8.582x10-11 m2/s whilst for 6-shogaol, the higher yield and diffusion coefficient at 170°C and 19.417 × 10-11 m2/s.

  7. Radio Decameter Observations of AD Leonis

    NASA Astrophysics Data System (ADS)

    Leitzinger, M.; Odert, P., Hanslmeier, A.; Konovalenko, A. A.; Vanko, M.; Lammer, H.; Khodachenko, M. I.; Rucker, H. O.

    AD Leonis is known to be an active flaring star of spectral type M4.5 Ve. The World's largest decameter array, the UTR-2 near Kharkov/Ukraine of the Ukrainian Academy of Sciences, was monitoring this star for ten nights during February 2007. A Digital Spectro-Polarimeter (DSP) was used as back-end facility giving the possibility of investigating dynamic spectra. These spectra are very useful when searching for decameter radio type II bursts, which show a slow frequency drift with time and are known to be correlated with Coronal Mass Ejections (CMEs) on the Sun. Since the drift in frequency is correlated with the density of the material through which the shock wave propagates, we can use this also as a proxy for e.g. density changes for stellar wind investigations. We are able to discriminate between stellar and artificial emission using the instrument's multibeam capability. Averaging techniques are also applied to make possible bursts detectable. The main intention is the search for stellar analogues of the solar type II bursts as signatures of CMEs, but also for periodic structures. Preliminary results are presented.

  8. Radio decameter observations of AD Leonis

    NASA Astrophysics Data System (ADS)

    Leitzinger, M.; Odert, P.; Hanslmeier, A.; Konovalenko, A. A.; Vanko, M.; Khodachenko, M.; Lammer, H.; Rucker, H. O.

    2007-08-01

    AD Leonis is known to be an active flaring star of spectral type M4.5 Ve. The world's largest decamter array, the UTR-2 near Kharkov/Ukraine of the Ukrainian Academy of Scienecs, was monitoring this star for ten nights during February of this year. A Digital Spectro Polarimeter (DSP) was used as back-end facility giving the possibility of investigating dynamic spectra. These spectra are very useful when searching for decameter radio type II bursts, which show a slow frequency drift with time and are known to be correlated with Coronal Mass Ejections (CMEs) on the sun. Since the drift in frequency is correlated with the density of the material through which the shock wave propagates, we can use this also as a proxy for e.g. density changes for stellar wind investigations. We are able to discriminate between stellar and artificial emission using the instrument's multibeam capability. Also averaging techniques are applied to make possible bursts detectable. The main intention is the search for stellar analogues of the solar type II bursts as signatures of CMEs, but also for periodic structures. Preliminary results are presented.

  9. Comments on Cosmic Censorship in AdS/CFT

    SciTech Connect

    Hubeny, Veronika E.; Liu, Xiao; Rangamani, Mukund; Shenker, Stephen

    2004-03-21

    Recently Hertog, Horowitz, and Maeda (HHM) (hep-th/0310054) have proposed that cosmic censorship can be violated in the AdS/CFT context. They argue that for certain initial data there is insufficient energy available to make a black hole whose horizon is big enough to cloak the singularity that forms. We have investigated this proposal in the models HHM discuss and have thus far been unable to find initial data that provably satisfy this criterion, despite our development of an improved lower bound on the size of the singular region. This is consistent with recent numerical results (hep-th/0402109). For certain initial data, the energies of our configurations are not far above the lower bound on the requisite black hole mass, and so it is possible that in the exact time development naked singularities do form. We go on to argue that the finite radius cut-off AdS_5 situation discussed by HHM displays instabilities when the full 10D theory is considered. We propose an AdS_3 example that may well be free of this instability.

  10. Advertising health: the case for counter-ads.

    PubMed Central

    Dorfman, L; Wallack, L

    1993-01-01

    Public service advertisements have been used by many in hopes of "selling" good health behaviors. But selling good behavior--even if it could be done more effectively--is not the best goal for using mass media to prevent health problems. Personal behavior is only part of what determines health status. Social conditions and the physical environment are important determinants of health that are usually ignored by health promotion advertising. Public service advertising may be doing more harm than good if it is diverting attention from more effective socially based health promotion strategies. Counter-ads are one communications strategy that could be used to promote a broader responsibility for rectifying health problems. In the tradition of advocacy advertising directly promoting policy rather than products, counter-ads promote views consistent with a public health perspective. Counter-ads set the agenda for health issues, conferring status on policy-oriented strategies for addressing health problems. The primary purpose of counter-ads is to challenge the dominant view that public health problems reflect personal health habits. They are controversial because they place health issues in a social and political context. Advertising strategies for health promotion range over a spectrum from individually oriented public service advertising to socially oriented counter-advertising. The recent anti-tobacco campaign from the California Department of Health Services represents advertisements across the spectrum. Counter-ads that focus on a politically controversial definition for health problems are an appropriate and necessary alternative to public service advertising. PMID:8265756

  11. Advertising health: the case for counter-ads.

    PubMed

    Dorfman, L; Wallack, L

    1993-01-01

    Public service advertisements have been used by many in hopes of "selling" good health behaviors. But selling good behavior--even if it could be done more effectively--is not the best goal for using mass media to prevent health problems. Personal behavior is only part of what determines health status. Social conditions and the physical environment are important determinants of health that are usually ignored by health promotion advertising. Public service advertising may be doing more harm than good if it is diverting attention from more effective socially based health promotion strategies. Counter-ads are one communications strategy that could be used to promote a broader responsibility for rectifying health problems. In the tradition of advocacy advertising directly promoting policy rather than products, counter-ads promote views consistent with a public health perspective. Counter-ads set the agenda for health issues, conferring status on policy-oriented strategies for addressing health problems. The primary purpose of counter-ads is to challenge the dominant view that public health problems reflect personal health habits. They are controversial because they place health issues in a social and political context. Advertising strategies for health promotion range over a spectrum from individually oriented public service advertising to socially oriented counter-advertising. The recent anti-tobacco campaign from the California Department of Health Services represents advertisements across the spectrum. Counter-ads that focus on a politically controversial definition for health problems are an appropriate and necessary alternative to public service advertising.

  12. Quantization of the AdS3 superparticle on OSP (1 | 2) 2 / SL (2 , R)

    NASA Astrophysics Data System (ADS)

    Heinze, Martin; Jorjadze, George

    2017-02-01

    We analyze AdS3 superparticle dynamics on the coset OSP (1 | 2) × OSP (1 | 2) / SL (2 , R). The system is quantized in canonical coordinates obtained by gauge invariant Hamiltonian reduction. The left and right Noether charges of a massive particle are parametrized by coadjoint orbits of a timelike element of osp (1 | 2). Each chiral sector is described by two bosonic and two fermionic canonical coordinates corresponding to a superparticle with superpotential W = q - m / q, where m is the particle mass. Canonical quantization then provides a quantum realization of osp (1 | 2) ⊕ osp (1 | 2). For the massless particle the chiral charges lie on the coadjoint orbit of a nilpotent element of osp (1 | 2) and each of them depends only on one real fermion, which demonstrates the underlying κ-symmetry. These remaining left and right fermionic variables form a canonical pair and the system is described by four bosonic and two fermionic canonical coordinates. Due to conformal invariance of the massless particle, the osp (1 | 2) ⊕ osp (1 | 2) extends to the corresponding superconformal algebra osp (2 | 4). Its 19 charges are given by all real quadratic combinations of the canonical coordinates, which trivializes their quantization.

  13. AdS monopole black hole and phase transition

    NASA Astrophysics Data System (ADS)

    Miyashita, Shoichiro; Maeda, Kei-ichi

    2016-12-01

    We study the Einstein-SO(3)Yang-Mills-Higgs system with a negative cosmological constant and find the monopole black hole solutions as well as the trivial Reissner-Nordström black hole. We discuss thermodynamical stability of the monopole black hole in an isolated system. We expect a phase transition between those two black holes when the mass of a black hole increases or decreases. The type of phase transition depends on the cosmological constant Λ , as well as the vacuum expectation value v and the coupling constant λ of the Higgs field. Keeping λ small, we find there are two critical values of the cosmological constant, Λcr(1 )(v ) and Λcr (2 )(v ), which depend on v . If Λcr (1 )(v )<Λ (<0 ) , we find the first order transition, whereas if Λcr (2 )(v )<Λ <Λcr (1 )(v ) , the transition becomes second order. For the case of Λb(v )<Λ <Λ(2 )(v ), we again find the first order irreversible transition from the monopole black hole to the extreme Reissner-Nordström black hole. Beyond Λb(v ), no monopole black hole exists. We also discuss thermodynamical properties of the monopole black hole in a thermal bath system.

  14. Classical string solutions in the AdS/CFT correspondence

    NASA Astrophysics Data System (ADS)

    Irrgang, Andrew W.

    This dissertation studies the properties of fields generated by moving charged particles in a strongly interacting gauge theory. In classical electro-magnetism, calculating the fields produced by moving charges is straight forward, but in a strongly interacting non-abelian theory, such as QCD, this not the case due to large quantum effects and the theory being non-linear. Recently, the AdS/CFT correspondence made these calculations feasible, though still non-trivial. Interestingly from a physics point of view, the fields produced by the moving charges are represented by a string. Solving for the string's changing shape is possible due to a nice mathematical application of integrability techniques involving Riemann Theta functions. The first case of consideration is a quark and anti-quark rotating about their center of mass. Such a configuration is described by a rigidly rotating open string with endpoints in the boundary of AdS5. Various cases of angular motion of the quark/anti-quark pair in the boundary is analyzed using an associated 1-d integrable Neumann-Rosochatius system. A solution is found from which the energy and angular momenta of the configuration, ie, the field between the charged particles, is calculated after being properly regularized. The work continues by investigating open strings with endpoints in the boundary of AdS that follow more generic trajectories. Utilizing integrability techniques, the equations of motion are solved when the string moves in AdS3. The Pohlmeyer reduction reduces the equations of motion to a generalized Sinh-Gordon equation from which three cases are studied: the Liouville, Sinh-Gordon, and Cosh-Gordon equations. Solutions to the Sinh and Cosh-Gordon equations are written in terms of Riemann Theta functions and numerical examples of these solutions are presented.

  15. Low coefficient of thermal expansion polyimides containing metal ion additives

    NASA Technical Reports Server (NTRS)

    Stoakley, D. M.; St. Clair, A. K.

    1992-01-01

    Polyimides have become widely used as high performance polymers as a result of their excellent thermal stability and toughness. However, lowering their coefficient of thermal expansion (CTE) would increase their usefulness for aerospace and electronic applications where dimensional stability is a requirement. The incorporation of metal ion-containing additives into polyimides, resulting in significantly lowered CTE's, has been studied. Various metal ion additives have been added to both polyamic acid resins and soluble polyimide solutions in the concentration range of 4-23 weight percent. The incorporation of these metal ions has resulted in reductions in the CTE's of the control polyimides of 12 percent to over 100 percent depending on the choice of additive and its concentration.

  16. Transport Coefficients for the NASA Lewis Chemical Equilibrium Program

    NASA Technical Reports Server (NTRS)

    Svehla, Roger A.

    1995-01-01

    The new transport property data that will be used in the NASA Lewis Research Center's Chemical Equilibrium and Applications Program (CEA) is presented. It complements a previous publication that documented the thermodynamic and transport property data then in use. Sources of the data and a brief description of the method by which the data were obtained are given. Coefficients to calculate the viscosity, thermal conductivity, and binary interactions are given for either one, or usually, two temperature intervals, typically 300 to 1000 K and 1000 to 5000 K. The form of the transport equation is the same as used previously. The number of species was reduced from the previous database. Many species for which the data were estimated were eliminated from the database. Some ionneutral interactions were added.

  17. Drag and energy accommodation coefficients during sunspot maximum

    NASA Astrophysics Data System (ADS)

    Pardini, Carmen; Anselmo, Luciano; Moe, Kenneth; Moe, Mildred M.

    over 30-day intervals from October 1999 to December 2002, was found to be 2.16. When the measurement was adjusted upward by 12 % to correct for the bias in the density model, the resulting physical drag coefficient became 2.42. Comparison of this result with the calculated dependence of the drag coefficient of SNOE on the energy accommodation coefficient has revealed agreement for α = 0.97. This high an accommodation coefficient implies that a considerable portion of the satellite surface had oxygen atoms adsorbed on it. This is physically reasonable because during sunspot maximum the increased solar UV radiation dissociates more molecular oxygen and the UV heating causes the atmosphere to expand to higher altitudes. The analysis was carried out for several satellites, having perigee altitudes between 300 and 800 km, during the last solar cycle maximum. This sample included a subset of Surrey satellites, for which the main characteristics (i.e. size, shape, mass, attitude, etc.) were known, and some spherical, or nearly spherical, objects.

  18. Two media method for gamma ray attenuation coefficient measurement of archaeological ceramic samples

    PubMed

    Cunha e Silva RM; Appoloni; Parreira; Espinoza-Quinones; Coimbra; Aragao

    2000-12-01

    This work reports the application of an alternative methodology for the linear attenuation coefficient determination of irregular shape samples, in such a way that it is not necessary to know the sample thickness. Based on this method, indigenous archaeological ceramic fragments from the region of Londrina, north of Parana State in Brazil, were studied. On the other hand, theoretical mass attenuation coefficient values were determined with the XCOM computer code. With the results obtained, it was concluded that the two media method works very well for the linear attenuation coefficient measurement of irregular-shaped ceramic samples, which makes it suitable, especially, for archaeometric studies.

  19. Historical Literature in the ADS

    NASA Astrophysics Data System (ADS)

    Eichhorn, G.; Kurtz, M. J.; Accomazzi, A.; Grant, C. S.

    1997-12-01

    The Astrophysics Data System at http://adswww.harvard.edu is in the process of scanning the historical astronomical literature and making it available through the World Wide Web. We have scanned several volumes from the early 1800's of the "Astronomische Nachrichten", and the "Monthly Notices of the Royal Astronomical Society", the two oldest astronomical journals. We also have several of the early volumes of the "Astrophysical Journal" and the "Astronomical Journal" available. For all the journals that we cover, we have scanned volume 1. These early volumes can be accessed on a page-by-page basis. We plan to continue to scan this historical literature and complete these journals within the next year. We are also collaborating with a preservation project at Harvard University. This project will microfilm selected parts of astronomical Observatory reports. We plan to scan these microfilms to produce electronic images of these reports and put them on-line in the ADS. We hope to eventually cover most of the astronomical literature. In order to organize the scanned pages into articles, we need tables of contents (ToC). The early issues of the journals did not have printed ToC pages, so this needs to be done by hand. We do not have the financial resources to build these ToCs. We are looking for collaborators who would be willing to work with us in building these ToCs for the older journals and observatory reports. If you are interested in such a project, please contact the first author at gei@cfa.harvard.edu.

  20. Impacts of air-sea exchange coefficients on snowfall events over the Korean Peninsula

    NASA Astrophysics Data System (ADS)

    Kang, Jung-Yoon; Kwon, Young Cheol

    2016-08-01

    Snowfall over the Korean Peninsula is mainly associated with air mass transformation by the fluxes across the air-sea interface during cold-air outbreaks over the warm Yellow Sea. The heat and momentum exchange coefficients in the surface flux parameterization are key parameters of flux calculations across the air-sea interface. This study investigates the effects of the air-sea exchange coefficients on the simulations of snowfall events over the Korean Peninsula using the Weather Research and Forecasting (WRF) model. Two snowfall cases are selected for this study. One is a heavy snowfall event that took place on January 4, 2010, and the other is a light snowfall event that occurred on December 23-24, 2011. Several sensitivity tests are carried out with increased and decreased heat and momentum exchange coefficients. The domain-averaged precipitation is increased (decreased) with increased (decreased) heat exchange coefficient because the increased (decreased) surface heat flux leads to more (less) moist conditions in the low level of the atmosphere. On the other hand, the domain-averaged precipitation is decreased (increased) with increased (decreased) momentum exchange coefficient because the increased (decreased) momentum coefficient causes reduction (increase) of wind speed and heat flux. The variation of precipitation in the heat exchange coefficient experiments is much larger than that in the momentum exchange coefficient experiments because the change of heat flux has a more direct impact on moisture flux and snowfall amount, while the change of momentum flux has a rather indirect impact via wind speed changes. The low-pressure system is intensified and moves toward North when the heat exchange coefficient is increased because warming and moistening of the lower atmosphere contributes to destabilize the air mass, resulting in the change of precipitation pattern over the Korean Peninsula in the heat exchange coefficient experiments.

  1. Acetylated lysozyme as impurity in lysozyme crystals: constant distribution coefficient

    NASA Astrophysics Data System (ADS)

    Thomas, B. R.; Chernov, A. A.

    2001-11-01

    Hen egg white lysozyme (HEWL) was acetylated to modify molecular charge keeping the molecular size and weight nearly constant. Two derivatives, A and B, more and less acetylated, respectively, were obtained, separated, purified and added to the solution from which crystals of tetragonal HEWL crystals were grown. Amounts of the A and B impurities added were 0.76, 0.38 and 0.1 mg/ml and 0.43, 0.22, 0.1 mg/ml, respectively. The HEWL concentration were 20, 30 and 40 mg/ml. The crystals grown in 18 experiments for each impurity concentration and supersaturation were dissolved and quantities of A or B additives in these crystals were analyzed by cation exchange high performance liquid chromatography. All the data for each set of 18 samples with the different impurity and regular HEWL concentrations is well described by one distribution coefficient K=2.15±0.13 for A and K=3.42±0.25 for B. According to definition of K by Eq. (1) in the text, the condition K=const is equivalent to a decrease of impurity amount in the crystal as the supersaturation increases. The observed independence of the distribution coefficient on both the impurity concentration and supersaturation is explained by the dilution model described in this paper. It shows that the impurity adsorption and incorporation rates are proportional to the impurity concentration and that the growth rate is proportional to the concentration of crystallizing protein in solution. The frequency at which an impurity molecules irreversibly join the crystal was estimated to be 3 s -1, much higher than such frequency for regular crystal molecules 5×10 -2 s -1 at 30 mg/ml lysozyme concentration. Reasons for this inequality are discussed.

  2. Octanol/water partition coefficient estimation without missing fragment problems

    SciTech Connect

    Meylan, W.; Howard, P.H.

    1994-12-31

    Atom/fragment contribution values, used to estimate the log octanol-water partition coefficient (log P) of organic compounds, have been determined for 125 simple chemical substructures by a multiple linear regression of 1175 compounds with measured log P values. An additional 1176 compounds were used to determine 230 ``correction factors`` for various substructure orientations. Log P of a compound is estimated by simply summing all atom-fragment contribution values and correction factors occurring in a chemical structure. For the 2351 compound training set, the correlation coefficient (r{sup 2}) for the estimated to measured log P values is 0.98 with a standard deviation (sd) of 0.22 and an absolute mean error (me) of 0.16. This atom/fragment contribution (AFC) method was then tested on a separate validation set of 6,055 measured log P value.% that were not used to derive the methodology, and yielded r{sup 2} of 0.94, ad of 0.41 and me of 0.31. The method is able to predict log P within {+-}0.8 log units for over 96% of the experimental dataset of 8,406 compounds. Because of the simple atom/fragment methodology, ``missing fragments`` (a problem encountered in other methods), does not occur in the AFC method. Statistically, it is superior to other comprehensive estimation methods.

  3. Influence of statistical sequential decay on isoscaling and symmetry energy coefficient in a gemini simulation

    SciTech Connect

    Zhou, P.; Tian, W. D.; Ma, Y. G.; Cai, X. Z.; Fang, D. Q.; Wang, H. W.

    2011-09-15

    Extensive calculations on isoscaling behavior with the sequential-decay model gemini are performed for the medium-to-heavy nuclei in the mass range A=60-120 at excitation energies up to 3 MeV/nucleon. The comparison between the products after the first-step decay and the ones after the entire-steps decay demonstrates that there exists a strong sequential decay effect on the final isoscaling parameters and the apparent temperature. Results show that the apparent symmetry energy coefficient {gamma}{sub app} does not reflect the initial symmetry energy coefficient C{sub sym} embedded in the mass calculation in the present gemini model.

  4. Influence of statistical sequential decay on isoscaling and symmetry energy coefficient in a gemini simulation

    NASA Astrophysics Data System (ADS)

    Zhou, P.; Tian, W. D.; Ma, Y. G.; Cai, X. Z.; Fang, D. Q.; Wang, H. W.

    2011-09-01

    Extensive calculations on isoscaling behavior with the sequential-decay model gemini are performed for the medium-to-heavy nuclei in the mass range A=60-120 at excitation energies up to 3 MeV/nucleon. The comparison between the products after the first-step decay and the ones after the entire-steps decay demonstrates that there exists a strong sequential decay effect on the final isoscaling parameters and the apparent temperature. Results show that the apparent symmetry energy coefficient γapp does not reflect the initial symmetry energy coefficient Csym embedded in the mass calculation in the present gemini model.

  5. Temporal correlation coefficient for directed networks.

    PubMed

    Büttner, Kathrin; Salau, Jennifer; Krieter, Joachim

    2016-01-01

    Previous studies dealing with network theory focused mainly on the static aggregation of edges over specific time window lengths. Thus, most of the dynamic information gets lost. To assess the quality of such a static aggregation the temporal correlation coefficient can be calculated. It measures the overall possibility for an edge to persist between two consecutive snapshots. Up to now, this measure is only defined for undirected networks. Therefore, we introduce the adaption of the temporal correlation coefficient to directed networks. This new methodology enables the distinction between ingoing and outgoing edges. Besides a small example network presenting the single calculation steps, we also calculated the proposed measurements for a real pig trade network to emphasize the importance of considering the edge direction. The farm types at the beginning of the pork supply chain showed clearly higher values for the outgoing temporal correlation coefficient compared to the farm types at the end of the pork supply chain. These farm types showed higher values for the ingoing temporal correlation coefficient. The temporal correlation coefficient is a valuable tool to understand the structural dynamics of these systems, as it assesses the consistency of the edge configuration. The adaption of this measure for directed networks may help to preserve meaningful additional information about the investigated network that might get lost if the edge directions are ignored.

  6. Computing spatial information from Fourier coefficient distributions.

    PubMed

    Heinz, William F; Werbin, Jeffrey L; Lattman, Eaton; Hoh, Jan H

    2011-05-01

    The spatial relationships between molecules can be quantified in terms of information. In the case of membranes, the spatial organization of molecules in a bilayer is closely related to biophysically and biologically important properties. Here, we present an approach to computing spatial information based on Fourier coefficient distributions. The Fourier transform (FT) of an image contains a complete description of the image, and the values of the FT coefficients are uniquely associated with that image. For an image where the distribution of pixels is uncorrelated, the FT coefficients are normally distributed and uncorrelated. Further, the probability distribution for the FT coefficients of such an image can readily be obtained by Parseval's theorem. We take advantage of these properties to compute the spatial information in an image by determining the probability of each coefficient (both real and imaginary parts) in the FT, then using the Shannon formalism to calculate information. By using the probability distribution obtained from Parseval's theorem, an effective distance from the uncorrelated or most uncertain case is obtained. The resulting quantity is an information computed in k-space (kSI). This approach provides a robust, facile and highly flexible framework for quantifying spatial information in images and other types of data (of arbitrary dimensions). The kSI metric is tested on a 2D Ising model, frequently used as a model for lipid bilayer; and the temperature-dependent phase transition is accurately determined from the spatial information in configurations of the system.

  7. Parametric modeling of quantile regression coefficient functions.

    PubMed

    Frumento, Paolo; Bottai, Matteo

    2016-03-01

    Estimating the conditional quantiles of outcome variables of interest is frequent in many research areas, and quantile regression is foremost among the utilized methods. The coefficients of a quantile regression model depend on the order of the quantile being estimated. For example, the coefficients for the median are generally different from those of the 10th centile. In this article, we describe an approach to modeling the regression coefficients as parametric functions of the order of the quantile. This approach may have advantages in terms of parsimony, efficiency, and may expand the potential of statistical modeling. Goodness-of-fit measures and testing procedures are discussed, and the results of a simulation study are presented. We apply the method to analyze the data that motivated this work. The described method is implemented in the qrcm R package.

  8. Temperature coefficients of multijunction solar cells

    NASA Technical Reports Server (NTRS)

    Virshup, G. F.; Chung, B.-C.; Ladle Ristow, M.; Kuryla, M. S.; Brinker, D.

    1990-01-01

    Temperature coefficients measured in solar simulators with those measured under AM0 solar illumination are compared to illustrate the challenges in making these measurements. It is shown that simulator measurements of the short-circuit current (delta Jsc/delta T) are inaccurate due to the mismatch between the solar spectrum and the simulators at the bandgaps of the solar cells. Especially susceptible to error is the delta Jsc/delta T of cells which are components in monolithic multijunction solar cells, such as GaAs filtered by 1.93-eV AlGaAs, which has an AM0 coefficient of 6.82 micro-A/sq cm/deg C, compared to a Xenon simulator coefficient of 22.2 micro-A/sq cm/deg C.

  9. Electrostatic coupling between DNA and its counterions modulates the observed translational diffusion coefficients.

    PubMed

    Stellwagen, Earle; Stellwagen, Nancy C

    2015-09-01

    Free solution capillary electrophoresis (CE) is a useful technique for measuring the translational diffusion coefficients of charged analytes. The measurements are relatively fast if the polarity of the electric field is reversed to drive the analyte back and forth past the detection window during each run. We have tested the validity of the resulting diffusion coefficients using double-stranded DNA molecules ranging in size from 20 to 960 base pairs as the model system. The diffusion coefficients of small DNAs are equal to values in the literature measured by other techniques. However, the diffusion coefficients of DNA molecules larger than ∼30 base pairs are anomalously high and deviate increasingly from the literature values with increasing DNA molar mass. The anomalously high diffusion coefficients are due to electrostatic coupling between the DNA and its counterions. As a result, the measured diffusion coefficients vary with the diffusion coefficient of the counterion, as well as with cation concentration and electric field strength. These effects can be reduced or eliminated by measuring apparent diffusion coefficients of the DNA at several different electric field strengths and extrapolating the results to zero electric field.

  10. Joule-Thomson expansion of the charged AdS black holes

    NASA Astrophysics Data System (ADS)

    Ökcü, Özgür; Aydıner, Ekrem

    2017-01-01

    In this paper, we study Joule-Thomson effects for charged AdS black holes. We obtain inversion temperatures and curves. We investigate similarities and differences between van der Waals fluids and charged AdS black holes for the expansion. We obtain isenthalpic curves for both systems in the T- P plane and determine the cooling-heating regions.

  11. Molecular modeling of diffusion coefficient and ionic conductivity of CO2 in aqueous ionic solutions.

    PubMed

    Garcia-Ratés, Miquel; de Hemptinne, Jean-Charles; Bonet Avalos, Josep; Nieto-Draghi, Carlos

    2012-03-08

    Mass diffusion coefficients of CO(2)/brine mixtures under thermodynamic conditions of deep saline aquifers have been investigated by molecular simulation. The objective of this work is to provide estimates of the diffusion coefficient of CO(2) in salty water to compensate the lack of experimental data on this property. We analyzed the influence of temperature, CO(2) concentration,and salinity on the diffusion coefficient, the rotational diffusion, as well as the electrical conductivity. We observe an increase of the mass diffusion coefficient with the temperature, but no clear dependence is identified with the salinity or with the CO(2) mole fraction, if the system is overall dilute. In this case, we notice an important dispersion on the values of the diffusion coefficient which impairs any conclusive statement about the effect of the gas concentration on the mobility of CO(2) molecules. Rotational relaxation times for water and CO(2) increase by decreasing temperature or increasing the salt concentration. We propose a correlation for the self-diffusion coefficient of CO(2) in terms of the rotational relaxation time which can ultimately be used to estimate the mutual diffusion coefficient of CO(2) in brine. The electrical conductivity of the CO(2)-brine mixtures was also calculated under different thermodynamic conditions. Electrical conductivity tends to increase with the temperature and salt concentration. However, we do not observe any influence of this property with the CO(2) concentration at the studied regimes. Our results give a first evaluation of the variation of the CO(2)-brine mass diffusion coefficient, rotational relaxation times, and electrical conductivity under the thermodynamic conditions typically encountered in deep saline aquifers.

  12. Diffusion and transport coefficients in synthetic opals

    SciTech Connect

    Sofo, J. O.; Mahan, G. D.

    2000-07-15

    Opals are structures composed of close-packed spheres in the size range of nano to micrometers. They are sintered to create small necks at the points of contact. We have solved the diffusion problem in such structures. The relation between the diffusion coefficient and the thermal and electrical conductivity is used to estimate the transport coefficients of opal structures as a function of the neck size and the mean free path of the carriers. The theory presented is also applicable to the diffusion problem in other periodic structures. (c) 2000 The American Physical Society.

  13. Seebeck Coefficient Measured With Differential Heat Pulses

    NASA Technical Reports Server (NTRS)

    Zoltan, L.; Wood, C.; Stapfer, G.

    1986-01-01

    Common experimental errors reduced because pulse technique suppresses drifts in thermoelectric measurements. Differential-heat-pulse apparatus measures Seebeck coefficient in semiconductors at temperatures up to 1,900 K. Sample heated to measuring temperature in furnace. Ends of sample then differentially heated a few degrees more by lamps. Differential temperature rise and consequent Seebeck voltage measured via thermocouple leads. Because pulse technique used, errors that often arise from long-term drifts in thermoelectric measurements suppressed. Apparatus works with temperature differences of only few degrees, further increasing accuracy of coefficients obtained.

  14. Second virial coefficients of dipolar hard spheres.

    PubMed

    Philipse, Albert P; Kuipers, Bonny W M

    2010-08-18

    An asymptotic formula is reported for the second virial coefficient B(2) of a dipolar hard-sphere (DHS) fluid, in zero external field, for strongly coupled dipolar interactions. This simple formula, together with the one for the weak-coupling B(2), provides an accurate prediction of the second virial coefficient for a wide range of dipole moments, including those that are experimentally accessible in magnetite ferrofluids. The weak-coupling B(2) also yields an estimate of the magnetic moment minimally needed for isotropic gas-liquid phase-separation, if any, in the DHS fluid.

  15. Asymptotics of loop quantum gravity fusion coefficients

    NASA Astrophysics Data System (ADS)

    Alesci, Emanuele; Bianchi, Eugenio; Magliaro, Elena; Perini, Claudio

    2010-05-01

    The fusion coefficients from SO(3) to SO(4) play a key role in the definition of spin foam models for the dynamics in loop quantum gravity. In this paper we give a simple analytic formula of the Engle-Pereira-Rovelli-Livine fusion coefficients. We study the large spin asymptotics and show that they map SO(3) semiclassical intertwiners into SU(2)L × SU(2)R semiclassical intertwiners. This non-trivial property opens the possibility for an analysis of the semiclassical behavior of the model.

  16. Absorption coefficient instrument for turbid natural waters

    NASA Astrophysics Data System (ADS)

    Friedman, E.; Cherdak, A.; Poole, L.; Houghton, W.

    1980-05-01

    The paper presents an instrument that directly measures multispectral absorption coefficient of turbid natural water. Attention is given to the design, which is shown to incorporate methods for the compensation of variation in the internal light source intensity, correction of the spectrally dependent nature of the optical elements, and correction for variation in the background light level. In addition, when used in conjunction with a spectrally matched total attenuation instrument, the spectrally dependent scattering coefficient can also be derived. Finally, it is reported that systematic errors associated with multiple scattering have been estimated using Monte Carlo techniques.

  17. Absorption coefficient instrument for turbid natural waters

    NASA Technical Reports Server (NTRS)

    Friedman, E.; Cherdak, A.; Poole, L.; Houghton, W.

    1980-01-01

    The paper presents an instrument that directly measures multispectral absorption coefficient of turbid natural water. Attention is given to the design, which is shown to incorporate methods for the compensation of variation in the internal light source intensity, correction of the spectrally dependent nature of the optical elements, and correction for variation in the background light level. In addition, when used in conjunction with a spectrally matched total attenuation instrument, the spectrally dependent scattering coefficient can also be derived. Finally, it is reported that systematic errors associated with multiple scattering have been estimated using Monte Carlo techniques.

  18. Onsager coefficients of a Brownian Carnot cycle

    NASA Astrophysics Data System (ADS)

    Izumida, Y.; Okuda, K.

    2010-10-01

    We study a Brownian Carnot cycle introduced by Schmiedl and Seifert [Europhys. Lett. 81, 20003 (2008)] from a viewpoint of the linear irreversible thermodynamics. By considering the entropy production rate of this cycle, we can determine thermodynamic forces and fluxes of the cycle and calculate the Onsager coefficients for general protocols, that is, arbitrary schedules to change the potential confining the Brownian particle. We show that these Onsager coefficients contain the information of the protocol shape and they satisfy the tight-coupling condition irrespective of whatever protocol shape we choose. These properties may give an explanation why the Curzon-Ahlborn efficiency often appears in the finite-time heat engines.

  19. Shear viscosity coefficient of liquid lanthanides

    SciTech Connect

    Patel, H. P. Thakor, P. B. Prajapati, A. V.; Sonvane, Y. A.

    2015-05-15

    Present paper deals with the computation of shear viscosity coefficient (η) of liquid lanthanides. The effective pair potential v(r) is calculated through our newly constructed model potential. The Pair distribution function g(r) is calculated from PYHS reference system. To see the influence of local field correction function, Hartree (H), Tailor (T) and Sarkar et al (S) local field correction function are used. Present results are compared with available experimental as well as theoretical data. Lastly, we found that our newly constructed model potential successfully explains the shear viscosity coefficient (η) of liquid lanthanides.

  20. Static Einstein-Maxwell Black Holes with No Spatial Isometries in AdS Space.

    PubMed

    Herdeiro, Carlos A R; Radu, Eugen

    2016-11-25

    We explicitly construct static black hole solutions to the fully nonlinear, D=4, Einstein-Maxwell-anti-de Sitter (AdS) equations that have no continuous spatial symmetries. These black holes have a smooth, topologically spherical horizon (section), but without isometries, and approach, asymptotically, global AdS spacetime. They are interpreted as bound states of a horizon with the Einstein-Maxwell-AdS solitons recently discovered, for appropriate boundary data. In sharp contrast to the uniqueness results for a Minkowski electrovacuum, the existence of these black holes shows that single, equilibrium, black hole solutions in an AdS electrovacuum admit an arbitrary multipole structure.

  1. Effects of ad placement and type on consumer responses to podcast ads.

    PubMed

    Ritter, Eric A; Cho, Chang-Hoan

    2009-10-01

    The purpose of this study was to understand the effects of podcast ad placement and podcast ad type on consumers' perceived intrusiveness, perceived irritation, attitude toward the ad, and ad avoidance. Our 2 x 2 (traditional ad vs. sponsorship by beginning vs. middle) experimental study found that sponsorships generated better consumer responses than did traditional ads and that podcast ads placed at the beginning of audio podcasts yielded better consumer responses than those placed in the middle. Implications for marketers and advertisers are discussed.

  2. Boundary conditions for conformally coupled scalar in AdS4

    NASA Astrophysics Data System (ADS)

    Oh, Jae-Hyuk

    2015-06-01

    We consider conformally coupled scalar with ɸ4 coupling in AdS4 and study its various boundary conditions on AdS boundary. We have obtained perturbative solutions of equation of motion of the conformally coupled scalar with power expansion order by order in ɸ4 coupling λ up to λ2 order. In its dual CFT, we get 2, 4 and 6 point functions by using this solution with Dirichlet and Neumann boundary conditions via AdS/CFT dictionary. We also consider marginal deformation on AdS boundary and get its on-shell and boundary effective actions.

  3. Inseparability of photon-added Gaussian states

    SciTech Connect

    Li Hongrong; Li Fuli; Zhu Shiyao

    2007-06-15

    The inseparability of photon-added Gaussian states which are generated from two-mode Gaussian states by adding photons is investigated. According to the established inseparability conditions [New J. Phys. 7, 211 (2005); Phys. Rev. Lett. 96, 050503 (2006)], we find that even if a two-mode Gaussian state is separable, the photon-added Gaussian state becomes entangled when the purity of the Gaussian state is larger than a certain value. The lower bound of entanglement of symmetric photon-added Gaussian states is derived. The result shows that entanglement of the photon-added Gaussian states is involved with high-order moment correlations. We find that fidelity of teleporting coherent states cannot be raised by employing the photon-added Gaussian states as a quantum channel of teleportation.

  4. Zernike aberration coefficients transformed to and from Fourier series coefficients for wavefront representation.

    PubMed

    Dai, Guang-Ming

    2006-02-15

    The set of Fourier series is discussed following some discussion of Zernike polynomials. Fourier transforms of Zernike polynomials are derived that allow for relating Fourier series expansion coefficients to Zernike polynomial expansion coefficients. With iterative Fourier reconstruction, Zernike representations of wavefront aberrations can easily be obtained from wavefront derivative measurements.

  5. Extending the Constant Coefficient Solution Technique to Variable Coefficient Ordinary Differential Equations

    ERIC Educational Resources Information Center

    Mohammed, Ahmed; Zeleke, Aklilu

    2015-01-01

    We introduce a class of second-order ordinary differential equations (ODEs) with variable coefficients whose closed-form solutions can be obtained by the same method used to solve ODEs with constant coefficients. General solutions for the homogeneous case are discussed.

  6. Factor Scores, Structure Coefficients, and Communality Coefficients: It's All One General Linear Model.

    ERIC Educational Resources Information Center

    Marsh, S. Neil

    This paper explains the meaning and use of three important factor analytic statistics: factor scores, factor structure coefficients, and communality coefficients. For the discussion, 301 observations of junior high school students 11 measured variables from a previous study are analyzed. While factors provide the researcher with general…

  7. Computer programs for the concordance correlation coefficient.

    PubMed

    Crawford, Sara B; Kosinski, Andrzej S; Lin, Hung-Mo; Williamson, John M; Barnhart, Huiman X

    2007-10-01

    The CCC macro is presented for computation of the concordance correlation coefficient (CCC), a common measure of reproducibility. The macro has been produced in both SAS and R, and a detailed presentation of the macro input and output for the SAS program is included. The macro provides estimation of three versions of the CCC, as presented by Lin [L.I.-K. Lin, A concordance correlation coefficient to evaluate reproducibility, Biometrics 45 (1989) 255-268], Barnhart et al. [H.X. Barnhart, J.L. Haber, J.L. Song, Overall concordance correlation coefficient for evaluating agreement among multiple observers, Biometrics 58 (2002) 1020-1027], and Williamson et al. [J.M. Williamson, S.B. Crawford, H.M. Lin, Resampling dependent concordance correlation coefficients, J. Biopharm. Stat. 17 (2007) 685-696]. It also provides bootstrap confidence intervals for the CCC, as well as for the difference in CCCs for both independent and dependent samples. The macro is designed for balanced data only. Detailed explanation of the involved computations and macro variable definitions are provided in the text. Two biomedical examples are included to illustrate that the macro can be easily implemented.

  8. On Not Interpreting Coefficients: Comment on Holt.

    ERIC Educational Resources Information Center

    Wilson, Thomas P.

    1979-01-01

    A recent recommendation by Holt (EJ 200 576) that coefficients resulting from estimating log-linear and similar models should not be interpreted is argued to be based on lack of clarity about the substantive and theoretical importance of the choice between dummy and effect coding for categorical variables. (Author/GDC)

  9. The Seebeck coefficient of superionic conductors

    SciTech Connect

    Mahan, G. D.

    2015-01-28

    We present a theory of the anomalous Seebeck coefficient found in the superionic conductor Cu{sub 2}Se. It has a phase transition at T = 400 K where the cations disorder but the anions do not. This disorder gives a temperature-dependent width to the electronic states in the conduction band. This width provides the anomalous Seebeck contribution.

  10. Apparatus Measures Seebeck Coefficient And Resistivity

    NASA Technical Reports Server (NTRS)

    Zoltan, Leslie D.; Wood, Charles; Fleurial, Jean-Pierre; Liu, Yixin

    1993-01-01

    Electrical measurements made by four point probes, two of which double as temperature probes. Laboratory apparatus measures both Seebeck coefficients and electrical resistivities of candidate thermoelectric materials at temperatures from ambient to 1,300 K. Apparatus makes possible to take both measurements alternately and in rapid succession during same heating cycle, thereby reducing distortion.

  11. A new method for calculating loss coefficients

    SciTech Connect

    Chang, Y.C.; Yang, W.T.; Liu, C.C. . Dept. of Electrical Engineering)

    1994-08-01

    A method is proposed which avoids many limitations associated with traditional B-coefficient loss coefficient calculation. The proposed method, unlike the traditional B-coefficient method, is very fast and can handle line outages. The method utilizes network sensitivity factors which are established from DC load flow solutions. Line outage distribution factors (ODF's) are formulated using changes in network power generations to simulate the outaged line from the network. The method avoids the use of complicated reference frame transformations based upon Kron's tensor analysis. The necessity of data normalization used in least squares and the evaluation of the slope of [theta][sub j] versus PG[sub n] is not necessary with the proposed method. Using IEEE standard 14-bus and 30-bus systems, the method's results are compared against results obtained from an AC load flow program (LFED). The method's solution speed is compared to that of the LFED method, the base case database method and the conventional B-coefficient method based on A[sub jn]-factor. The proposed method is easy to implement and, when compared to other methods, has exhibited good accuracy and rapid execution times. The method is well suited to on-line dispatch applications.

  12. Experimental Influence Coefficients and Vibration Modes

    NASA Technical Reports Server (NTRS)

    Weidman, Deene J.; Kordes, Eldon E.

    1959-01-01

    Test results are presented for both symmetrical and antisymmetrical static loading of a wing model mounted on a three-point support system. The first six free-free vibration modes were determined experimentally. A comparison is made of the symmetrical nodal patterns and frequencies with the symmetrical nodal patterns and frequencies calculated from the experimental influence coefficients.

  13. Static coefficient test method and apparatus

    NASA Technical Reports Server (NTRS)

    Haehner, C. L.; Tarpley, J. L. (Inventor)

    1976-01-01

    The static coefficient of friction between contacting surfaces of a plurality of bodies is determined by applying a load to the bodies in a direction normal to the contacting surfaces. Opposite ends of a flexible filament are connected to a load cell and the first of the bodies. A motor continuously moves the second of the bodies away from the load cell at constant velocity at right angles to the force of the normal load so that the first body moves intermittently relative to the second body across a contact surface between them. The load on the surfaces, the nature of the surfaces, and the speed of the first body relative to the load cell are such that the filament is alternately and cyclically tensioned and relaxed as the movement occurs. The maximum tension occurs at the incipient stages of movement of the first body relative to the second body. The load cell derives a series of measurements which are coupled to an x-y recorder, from which the maximum forces of the filament are determined to enable the static coefficient of friction to be determined. From the maximum forces and the normal force, the coefficient is determined. For determining coefficients of friction where there are large compression loads, the normal load is applied with a calibrated compression spring that is deflected by a predetermined amount determined by a spring load vs. deflection calibration curve.

  14. Problems on Divisibility of Binomial Coefficients

    ERIC Educational Resources Information Center

    Osler, Thomas J.; Smoak, James

    2004-01-01

    Twelve unusual problems involving divisibility of the binomial coefficients are represented in this article. The problems are listed in "The Problems" section. All twelve problems have short solutions which are listed in "The Solutions" section. These problems could be assigned to students in any course in which the binomial theorem and Pascal's…

  15. The Evolution of Pearson's Correlation Coefficient

    ERIC Educational Resources Information Center

    Kader, Gary D.; Franklin, Christine A.

    2008-01-01

    This article describes an activity for developing the notion of association between two quantitative variables. By exploring a collection of scatter plots, the authors propose a nonstandard "intuitive" measure of association; and by examining properties of this measure, they develop the more standard measure, Pearson's Correlation Coefficient. The…

  16. The Seebeck coefficient of superionic conductors

    NASA Astrophysics Data System (ADS)

    Mahan, G. D.

    2015-01-01

    We present a theory of the anomalous Seebeck coefficient found in the superionic conductor Cu2Se. It has a phase transition at T = 400 K where the cations disorder but the anions do not. This disorder gives a temperature-dependent width to the electronic states in the conduction band. This width provides the anomalous Seebeck contribution.

  17. Bayesian Meta-Analysis of Coefficient Alpha

    ERIC Educational Resources Information Center

    Brannick, Michael T.; Zhang, Nanhua

    2013-01-01

    The current paper describes and illustrates a Bayesian approach to the meta-analysis of coefficient alpha. Alpha is the most commonly used estimate of the reliability or consistency (freedom from measurement error) for educational and psychological measures. The conventional approach to meta-analysis uses inverse variance weights to combine…

  18. Coefficient Omega Bootstrap Confidence Intervals: Nonnormal Distributions

    ERIC Educational Resources Information Center

    Padilla, Miguel A.; Divers, Jasmin

    2013-01-01

    The performance of the normal theory bootstrap (NTB), the percentile bootstrap (PB), and the bias-corrected and accelerated (BCa) bootstrap confidence intervals (CIs) for coefficient omega was assessed through a Monte Carlo simulation under conditions not previously investigated. Of particular interests were nonnormal Likert-type and binary items.…

  19. Pressure-viscosity coefficient of biobased lubricants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Film thickness is an important tribological property that is dependent on the combined effect of lubricant properties, material property of friction surfaces, and the operating conditions of the tribological process. Pressure-viscosity coefficient (PVC) is one of the lubricant properties that influe...

  20. Layer coefficients for NHDOT pavement materials

    NASA Astrophysics Data System (ADS)

    Janoo, Vincent C.

    1994-09-01

    In 1992, the New Hampshire Department of Transportation (NHDOT) experimented with the use of reclaimed asphalt concrete as a base course material, identified by NHDOT as reclaimed stabilized base (RSB). The RSB and a control test section were placed on Interstate 93 between exits 18 and 19. The RSB test section was designed to the same structural number (SN) as the control. To evaluate the structural capacity of these test sections, the U.S. Army Cold Regions Research and Engineering Laboratory (CRREL) conducted deflection tests using a Dynatest 8000 falling weight deflectometer (FWD). Preliminary analysis of the results by NHDOT personnel showed higher deflection in the reclaimed asphalt concrete test sections. The explanation was that the layer coefficient used for the RSB layer in the design was probably incorrect. A total of 10 test sections constituting the base course materials used by NHDOT were built near Bow, New Hampshire. CRREL evaluated and estimated the layer coefficients of the base course materials. The test program was developed to characterize the material in more than one way. Tests were conducted with the heavy weight deflectometer (HWD), dynamic cone penetrometer (DCP) and the Clegg hammer. In situ California bearing ratio (CBR) tests were also conducted. The deflection from the HWD were used with the WESDEF back calculation program to determine the layer moduli. The moduli were than used with the AASHTO Design Guide to calculate the layer coefficients. The layer coefficients were also determined with the method proposed by Rohde. The CBR values from the Clegg hammer, in situ CBR and DCP tests were also used in the relationships in the HDM model to determine the layer coefficients.

  1. Effects of microscopic transport coefficients on fission observables calculated by the Langevin equation

    NASA Astrophysics Data System (ADS)

    Usang, M. D.; Ivanyuk, F. A.; Ishizuka, C.; Chiba, S.

    2016-10-01

    Nuclear fission is treated by using the Langevin dynamical description with macroscopic and microscopic transport coefficients (mass and friction tensors), and it is elucidated how the microscopic (shell and pairing) effects in the transport coefficients, especially their dependence on temperature, affects various fission observables. We found that the microscopic transport coefficients, calculated by linear response theory, change drastically as a function of temperature: in general, the friction increases with growing temperature while the mass tensor decreases. This temperature dependence brings a noticeable change in the mass distribution and kinetic energies of fission fragments from nuclei around 236U at an excitation energy of 20 MeV. The prescission kinetic energy decreases from 25 MeV at low temperature to about 2.5 MeV at high temperature. In contrast, the Coulomb kinetic energy increases as the temperature increases. Interpolating the microscopic transport coefficients among the various temperatures enabled our Langevin equation to use the microscopic transport coefficients at a deformation-dependent local temperature of the dynamical evolution. This allowed us to compare directly the fission observables of both macroscopic and microscopic calculations, and we found almost identical results under the conditions considered in this work.

  2. Mass loss

    NASA Technical Reports Server (NTRS)

    Goldberg, Leo

    1987-01-01

    Observational evidence for mass loss from cool stars is reviewed. Spectra line profiles are used for the derivation of mass-loss rates with the aid of the equation of continuity. This equation implies steady mass loss with spherical symmetry. Data from binary stars, Mira variables, and red giants in globular clusters are examined. Silicate emission is discussed as a useful indicator of mass loss in the middle infrared spectra. The use of thermal millimeter-wave radiation, Very Large Array (VLA) measurement of radio emission, and OH/IR masers are discussed as a tool for mass loss measurement. Evidence for nonsteady mass loss is also reviewed.

  3. From path integrals to tensor networks for the AdS /CFT correspondence

    NASA Astrophysics Data System (ADS)

    Miyaji, Masamichi; Takayanagi, Tadashi; Watanabe, Kento

    2017-03-01

    In this paper, we discuss tensor network descriptions of AdS /CFT from two different viewpoints. First, we start with a Euclidean path-integral computation of ground state wave functions with a UV cutoff. We consider its efficient optimization by making its UV cutoff position dependent and define a quantum state at each length scale. We conjecture that this path integral corresponds to a time slice of anti-de Sitter (AdS) spacetime. Next, we derive a flow of quantum states by rewriting the action of Killing vectors of AdS3 in terms of the dual two-dimensional conformal field theory (CFT). Both approaches support a correspondence between the hyperbolic time slice H2 in AdS3 and a version of continuous multiscale entanglement renormalization ansatz. We also give a heuristic argument about why we can expect a sub-AdS scale bulk locality for holographic CFTs.

  4. Light-Front Quantization and AdS/QCD: An Overview

    SciTech Connect

    de Teramond, Guy F.; Brodsky, Stanley J.; /SLAC /Stanford U., Phys. Dept.

    2011-08-19

    We give an overview of the light-front holographic approach to strongly coupled QCD, whereby a confining gauge theory, quantized on the light front, is mapped to a higher-dimensional anti de Sitter (AdS) space. The framework is guided by the AdS/CFT correspondence incorporating a gravitational background asymptotic to AdS space which encodes the salient properties of QCD, such as the ultraviolet conformal limit at the AdS boundary at z {yields} 0, as well as modifications of the geometry in the large z infrared region to describe confinement and linear Regge behavior. There are two equivalent procedures for deriving the AdS/QCD equations of motion: one can start from the Hamiltonian equation of motion in physical space time by studying the off-shell dynamics of the bound state wavefunctions as a function of the invariant mass of the constituents. To a first semiclassical approximation, where quantum loops and quark masses are not included, this leads to a light-front Hamiltonian equation which describes the bound state dynamics of light hadrons in terms of an invariant impact variable {zeta} which measures the separation of the partons within the hadron at equal light-front time. Alternatively, one can start from the gravity side by studying the propagation of hadronic modes in a fixed effective gravitational background. Both approaches are equivalent in the semiclassical approximation. This allows us to identify the holographic variable z in AdS space with the impact variable {zeta}. Light-front holography thus allows a precise mapping of transition amplitudes from AdS to physical space-time. The internal structure of hadrons is explicitly introduced and the angular momentum of the constituents plays a key role.

  5. Beyond Test Scores: Adding Value to Assessment

    ERIC Educational Resources Information Center

    Rothman, Robert

    2010-01-01

    At a time when teacher quality has emerged as a key factor in student learning, a statistical technique that determines the "value added" that teachers bring to student achievement is getting new scrutiny. Value-added measures compare students' growth in achievement to their expected growth, based on prior achievement and demographic…

  6. A rotating hairy AdS3 black hole with the metric having only one Killing vector field

    NASA Astrophysics Data System (ADS)

    Iizuka, Norihiro; Ishibashi, Akihiro; Maeda, Kengo

    2015-08-01

    We perturbatively construct a three-dimensional rotating AdS black hole with a real scalar hair. We choose the mass of a scalar field slightly above the Breitenlohner-Freedman bound and impose a general boundary condition for the bulk scalar field at AdS infinity. We first show that rotating BTZ black holes are unstable against scalar field perturbations under our more general boundary condition. Next we construct a rotating hairy black hole perturbatively with respect to a small amplitude ɛ of the scalar field, up to O( ɛ 4). Our hairy black hole is stationary and exhibits no dissipation, but the lumps of the non-linearly perturbed geometry break axial symmetry, thus providing the first example of a rotating black hole whose metric admits only one Killing vector field. Furthermore, we numerically show that the entropy of our hairy black hole is larger than that of the BTZ black hole with the same energy and the angular momentum. We briefly discuss if our rotating hairy black hole in lumpy geometry could be the endpoint of the instability.

  7. Thermodynamic geometry and phase transitions of AdS braneworld black holes

    NASA Astrophysics Data System (ADS)

    Chaturvedi, Pankaj; Sengupta, Gautam

    2017-02-01

    The thermodynamics and phase transitions of charged RN-AdS and rotating Kerr-AdS black holes in a generalized Randall-Sundrum braneworld are investigated in the framework of thermodynamic geometry. A detailed analysis of the thermodynamics, stability and phase structures in the canonical and the grand canonical ensembles for these AdS braneworld black holes are described. The thermodynamic curvatures for both these AdS braneworld black holes are computed and studied as a function of the thermodynamic variables. Through this analysis we illustrate an interesting dependence of the phase structures on the braneworld parameter for these black holes.

  8. Next-Generation A/D Sampler ADS3000+ for VLBI2010

    NASA Technical Reports Server (NTRS)

    Takefuji, Kazuhiro; Takeuchi, Hiroshi; Tsutsumi, Masanori; Koyama, Yasuhiro

    2010-01-01

    A high-speed A/D sampler, called ADS3000+, has been developed in 2008, which can sample one analog signal up to 4 Gbps to versatile Linux PC. After A/D conversion, the ADS3000+ can perform digital signal processing such as real-time DBBC (Digital Base Band Conversion) and FIR filtering such as simple CW RFI filtering using the installed FPGAs. A 4 Gsps fringe test with the ADS3000+ has been successfully performed. The ADS3000+ will not exclusively be used for VLBI but will also be employed in other applications.

  9. Holographic complexity and fidelity susceptibility as holographic information dual to different volumes in AdS

    NASA Astrophysics Data System (ADS)

    Mazhari, N. S.; Momeni, Davood; Bahamonde, Sebastian; Faizal, Mir; Myrzakulov, Ratbay

    2017-03-01

    The holographic complexity and fidelity susceptibility have been defined as new quantities dual to different volumes in AdS. In this paper, we will use these new proposals to calculate both of these quantities for a variety of interesting deformations of AdS. We obtain the holographic complexity and fidelity susceptibility for an AdS black hole, Janus solution, a solution with cylindrical symmetry, an inhomogeneous background and a hyperscaling violating background. It is observed that the holographic complexity depends on the size of the subsystem for all these solutions and the fidelity susceptibility does not have any such dependence.

  10. Scrotal masses

    MedlinePlus

    ... cause scrotal masses can be easily treated. Even testicular cancer has a high cure rate if found and ... your provider to determine if it may be testicular cancer. Prevention You can prevent scrotal masses caused by ...

  11. Abdominal mass

    MedlinePlus

    ... lumpy mass in the right upper quadrant. Liver enlargement (hepatomegaly) can cause a firm, irregular mass below ... the kidney (usually only affects one kidney). Spleen enlargement (splenomegaly) can sometimes be felt in the left- ...

  12. Coefficient of restitution dependence of intruder rise time in two-dimensional Brazil-nut effect

    NASA Astrophysics Data System (ADS)

    Kesuma, T.; Aji, D. P. Purwa; Viridi, S.; Suprijadi

    2016-04-01

    Brazil-Nut Effect (BNE) is a granular material phenomenon, where larger grains (usually known as intruder) rise to the top when the granular system vibrated. We observe a single intruder rise time of BNE phenomenon in a two-dimensional molecular dynamics simulation of hard spheres collision scheme. Some experiments have shown that some granular properties, such as size and density ratio, play an important role to determine the rise time. However, other property, such as coefficients of restitution, is considered not to have a measurable impact. We explore the intruder inelasticity dependence of the rise time by varying its coefficient of restitution. We found that the intruder rise time tends to be flat for relatively high coefficient of restitution and increases exponentially below a certain deflecting point for low coefficient of restitution. This holds for specific mass ratio.

  13. Electron attachment to anthracene. A FALP measurement of the rate coefficient at room temperature

    NASA Astrophysics Data System (ADS)

    Canosa, A.; Parent, D. C.; Pasquerault, D.; Au; Gomet, J. C.; Laubé, S.; Rowe, B. R.

    1994-09-01

    The rate coefficient β for electron attachment to anthracene has been measured at room temperature using a flowing afterglow Langmuir probe mass spectrometer. A value of 1 × 10 -9 cm 3 s -1 (30% uncertainty) was found, indicating that an activation energy barrier might exist.

  14. [Rapid analysis of added ingredients in heroin].

    PubMed

    Wang, Ji-fen; Yu, Jing; Guo, Xin; Sun, Xing-long; Wang, Ding-fang

    2011-07-01

    The method of rapid analysis of added ingredients in heroin was studied in the present paper. Adding sucrose, fructose, glucose, starch, caffeine and phenacetin to heroin with a certain percentage, the changes in the infrared spectrum with the concentration of heroin increasing and the detection limit of the additives were determined. Whether or not heroin can be detected in the sample with high concentration of added ingredients was studied using Raman spectroscopy. Similarly, in high purity of heroin, whether or not Raman spectroscopy can detect the added ingredients was tested. Through systematic experiments, the results showed that: using infrared spectroscopy and Raman spectroscopy to test the added ingredients of heroin is a rapid and effective method. Each has both advantages and disadvantages. We should select the appropriate method according to the actual cases.

  15. Bioremediation of solid TNT particles in a soil slurry reactor: Mass transfer considerations

    SciTech Connect

    Gilcrease, P.C.; Murphy, V.G.; Reardon, K.F.

    1996-12-31

    The bioreduction of solid TNT by a Pseudomonas fluorescens strain was investigated in a stirred tank reactor. Experiments in which TNT beads were the only solids present indicated that the biodegradation mechanism is dissolution followed by degradation in bulk solution. Dissolution may limit the overall rate, in which case degradation can be enhanced through increased agitation. Since soil slurries may contain high concentrations of solids other than TNT, Teflon chips were added to investigate two separate effects on TNT dissolution in slurries. First, Teflon solids increase the viscosity of the slurry, resulting in lower solid-liquid mass transfer coefficients. Second, the agitated Teflon slurry can grind or comminute TNT particles, creating additional surface area for mass transfer. Enhanced dissolution rates were observed for TNT beads in a Teflon slurry at higher agitator speeds. This suggests that the biodegradation of solid TNT nuggets in a soil slurry bioreactor may be enhanced under conditions that promote particle attrition.

  16. Tree-level S-matrix of Pohlmeyer reduced form of AdS 5 × S 5 superstring theory

    NASA Astrophysics Data System (ADS)

    Hoare, B.; Tseytlin, A. A.

    2010-02-01

    With a motivation to find a 2-d Lorentz-invariant solution of the AdS 5 × S 5 superstring we continue the study of the Pohlmeyer-reduced form of this theory. The reduced theory is constructed from currents of the superstring sigma model and is classically equivalent to it. Its action is that of G/ H = Sp(2, 2) × Sp(4)/[SU(2)]4 gauged WZW model deformed by an integrable potential and coupled to fermions. This theory is UV finite and is conjectured to be related to the superstring theory also at the quantum level. Expanded near the trivial vacuum it has the same elementary excitations (8+8 massive bosonic and fermionic 2-d degrees of freedom) as the AdS 5 × S 5 superstring in the S 5 light-cone gauge or near plane-wave expansion. In contrast to the superstring case, the interaction terms in the reduced action are manifestly 2-d Lorentz invariant. Since the theory is integrable, its S-matrix should be effectively determined by the two-particle scattering. Here we explicitly compute the tree-level two-particle S-matrix for the elementary excitations of the reduced theory. We find that this S-matrix has the same index structure and group factorization properties as the superstring S-matrix computed in hep-th/0611169 but has simpler coefficients, depending only on the difference of two rapidities. While the gauge-fixed form of the reduced action has only the bosonic [SU(2)]4 part of the PSU(2|2) × PSU(2|2) symmetry of the light-cone superstring spectrum as its manifest symmetry we conjecture that it should also have a hidden fermionic symmetry that effectively interchanges bosons and fermions and which should guide us towards understanding the relation between the two S-matrices.

  17. Series extension: predicting approximate series coefficients from a finite number of exact coefficients

    NASA Astrophysics Data System (ADS)

    Guttmann, Anthony J.

    2016-10-01

    Given the first 20-100 coefficients of a typical generating function of the type that arises in many problems of statistical mechanics or enumerative combinatorics, we show that the method of differential approximants performs surprisingly well in predicting (approximately) subsequent coefficients. These can then be used by the ratio method to obtain improved estimates of critical parameters. In favourable cases, given only the first 20 coefficients, the next 100 coefficients are predicted with useful accuracy. More surprisingly, this is also the case when the method of differential approximants does not do a useful job in estimating the critical parameters, such as those cases in which one has stretched exponential asymptotic behaviour. Nevertheless, the coefficients are predicted with surprising accuracy. As one consequence, significant computer time can be saved in enumeration problems where several runs would normally be made, modulo different primes, and the coefficients constructed from their values modulo different primes. Another is in the checking of newly calculated coefficients. We believe that this concept of approximate series extension opens up a whole new chapter in the method of series analysis.

  18. The eleven observations of comets between 687 AD and 1114 AD recorded in the Anglo Saxon Chronicle

    NASA Technical Reports Server (NTRS)

    Mardon, E. G.; Williams, J.; Mardon, A. A.

    1992-01-01

    This research paper is an examination of the eleven cometary references (679AD, 729AD, 892AD, 950AD, 975AD, 995AD, 1066AD, 1097AD, 1106AD, 1110AD and 1114AD) found in the various manuscripts of The Anglo Saxon Chronicle between 678 AD and 1114 AD. The manuscripts contain more than 35 celestial observations. This is an examination of astronomical phenomena and other climatic or natural events, that are described in The Anglo Saxon Chronicle, which is also referred to as The Old English Annals.

  19. Inflation in AdS/CFT

    SciTech Connect

    Freivogel, Ben; Hubeny, Veronika E.; Maloney, Alexander; Myers, Rob; Rangamani, Mukund; Shenker, Stephen; /Stanford U., Phys. Dept.

    2005-10-07

    We study the realization of inflation within the AdS/CFT correspondence. We assume the existence of a string landscape containing at least one stable AdS vacuum and a (nearby) metastable de Sitter state. Standard arguments imply that the bulk physics in the vicinity of the AdS minimum is described by a boundary CFT. We argue that large enough bubbles of the dS phase, including those able to inflate, are described by mixed states in the CFT. Inflating degrees of freedom are traced over and do not appear explicitly in the boundary description. They nevertheless leave a distinct imprint on the mixed state. Analytic continuation allows us, in principle, to recover a large amount of nonperturbatively defined information about the inflating regime. Our work also shows that no scattering process can create an inflating region, even by quantum tunneling, since a pure state can never evolve into a mixed state under unitary evolution.We study the realization of inflation within the AdS/CFT correspondence. We assume the existence of a string landscape containing at least one stable AdS vacuum and a (nearby) metastable de Sitter state. Standard arguments imply that the bulk physics in the vicinity of the AdS minimum is described by a boundary CFT. We argue that large enough bubbles of the dS phase, including those able to inflate, are described by mixed states in the CFT. Inflating degrees of freedom are traced over and do not appear explicitly in the boundary description. They nevertheless leave a distinct imprint on the mixed state. Analytic continuation allows us, in principle, to recover a large amount of nonperturbatively defined information about the inflating regime. Our work also shows that no scattering process can create an inflating region, even by quantum tunneling, since a pure state can never evolve into a mixed state under unitary evolution.

  20. Increased ephemeris accuracy using attitude-dependent aerodynamic force coefficients for inertially stabilized spacecraft

    NASA Technical Reports Server (NTRS)

    Folta, David C.; Baker, David F.

    1991-01-01

    The FREEMAC program used to generate the aerodynamic coefficients, as well as associated routines that allow the results to be used in other software is described. These capabilities are applied in two numerical examples to the short-term orbit prediction of the Gamma Ray Observatory (GRO) and Hubble Space Telescope (HST) spacecraft. Predictions using attitude-dependent aerodynamic coefficients were made on a modified version of the PC-based Ephemeris Generation Program (EPHGEN) and were compared to definitive orbit solutions obtained from actual tracking data. The numerical results show improvement in the predicted semi-major axis and along-track positions that would seem to be worth the added computational effort. Finally, other orbit and attitude analysis applications are noted that could profit from using FREEMAC-calculated aerodynamic coefficients, including orbital lifetime studies, orbit determination methods, attitude dynamics simulators, and spacecraft control system component sizing.