Science.gov

Sample records for adding adipic acid

  1. Toxicity of adipic acid.

    PubMed

    Kennedy, Gerald L

    2002-05-01

    Adipic acid has very low acute toxicity in rats with an LD50 > 5000 mg/kg. Adipic acid produced mild to no skin irritation on intact guinea pig skin as a 50% concentration in propylene glycol; it was not a skin sensitizer. Adipic acid caused mild conjunctival irritation in washed rabbit eyes; in unwashed rabbit eyes, there was mild conjunctival irritation, minimal iritis, but no corneal effects. Adipic acid dust may irritate the mucous membranes of the lungs and nose. In a 2-year feeding study, rats fed adipic acid at concentrations up to 5% in the diet exhibited only weight loss. Adipic acid is not genetically active in a wide variety of assay systems. Adipic acid caused no developmental toxicity in mice, rats, rabbits, or hamsters when administered orally. Adipic acid is partially metabolized in humans; the balance is eliminated unchanged in the urine. Adipic acid is slightly to moderately toxic to fish, daphnia, and algae in acute tests.

  2. [Biosynthesis of adipic acid].

    PubMed

    Han, Li; Chen, Wujiu; Yuan, Fei; Zhang, Yuanyuan; Wang, Qinhong; Ma, Yanhe

    2013-10-01

    Adipic acid is a six-carbon dicarboxylic acid, mainly for the production of polymers such as nylon, chemical fiber and engineering plastics. Its annual demand is close to 3 million tons worldwide. Currently, the industrial production of adipic acid is based on the oxidation of aromatics from non-renewable petroleum resources by chemo-catalytic processes. It is heavily polluted and unsustainable, and the possible alternative method for adipic acid production should be developed. In the past years, with the development of synthetic biology and metabolic engineering, green and clean biotechnological methods for adipic acid production attracted more attention. In this study, the research advances of adipic acid and its precursor production are reviewed, followed by addressing the perspective of the possible new pathways for adipic acid production.

  3. Syngas route to adipic acid

    SciTech Connect

    Kealing, H.S.

    1986-03-01

    In an era of escalating hydrocarbon prices, the development of new technology to synthesize large volume chemical intermediates from the least expensive sources of carbon and hydrogen has been a research area of increasing intensity. Adipic acid is prepared commercially by oxidative processes using either benzene or phenol as the raw material base. Since both benzene and phenol prices track with the price of crude oil, future adipic acid price will increase as the oil reserve decreases. Thus, there is a need for a new process to produce adipic acid from cheap, and readily available, raw materials such as butadiene obtained as a by-product from world scale olefin plants. One such process that capitalizes on the use of butadiene as a raw material is BASF's two-step carbonylation route to adipic acid. The butadiene in the C/sub 4/ cut from a steam cracker is transformed by a two-stage carbonylation with carbon monoxide and methanol into adipic acid dimethyl ester. Hydrolysis converts the ester into adipic acid. BASF is now engineering a 130 mm pound per year commercial plant based on this technology.

  4. 21 CFR 582.1009 - Adipic acid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Adipic acid. 582.1009 Section 582.1009 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1009 Adipic acid. (a) Product. Adipic acid. (b) (c) Limitations, restrictions, or explanation....

  5. 21 CFR 582.1009 - Adipic acid.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Adipic acid. 582.1009 Section 582.1009 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1009 Adipic acid. (a) Product. Adipic acid. (b) (c) Limitations, restrictions, or explanation....

  6. 21 CFR 582.1009 - Adipic acid.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Adipic acid. 582.1009 Section 582.1009 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1009 Adipic acid. (a) Product. Adipic acid. (b) (c) Limitations, restrictions, or explanation....

  7. 21 CFR 582.1009 - Adipic acid.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Adipic acid. 582.1009 Section 582.1009 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1009 Adipic acid. (a) Product. Adipic acid. (b) (c) Limitations, restrictions, or explanation....

  8. 21 CFR 582.1009 - Adipic acid.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Adipic acid. 582.1009 Section 582.1009 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1009 Adipic acid. (a) Product. Adipic acid. (b) (c) Limitations, restrictions, or explanation....

  9. 21 CFR 184.1009 - Adipic acid.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Adipic acid. 184.1009 Section 184.1009 Food and... Substances Affirmed as GRAS § 184.1009 Adipic acid. (a) Adipic acid (C6H10O4, CAS Reg. No. 00124-04-9) is also known as 1,4-butanedicarboxylic acid or hexane-dioic acid. It is prepared by nitric acid...

  10. 21 CFR 184.1009 - Adipic acid.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Adipic acid. 184.1009 Section 184.1009 Food and... Substances Affirmed as GRAS § 184.1009 Adipic acid. (a) Adipic acid (C6H10O4, CAS Reg. No. 00124-04-9) is also known as 1,4-butanedicarboxylic acid or hexane-dioic acid. It is prepared by nitric acid...

  11. 21 CFR 184.1009 - Adipic acid.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Adipic acid. 184.1009 Section 184.1009 Food and... Substances Affirmed as GRAS § 184.1009 Adipic acid. (a) Adipic acid (C6H10O4, CAS Reg. No. 00124-04-9) is also known as 1,4-butanedicarboxylic acid or hexane-dioic acid. It is prepared by nitric acid...

  12. 21 CFR 184.1009 - Adipic acid.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Adipic acid. 184.1009 Section 184.1009 Food and....1009 Adipic acid. (a) Adipic acid (C6H10O4, CAS Reg. No. 00124-04-9) is also known as 1,4-butanedicarboxylic acid or hexane-dioic acid. It is prepared by nitric acid oxidation of cyclohexanol...

  13. 21 CFR 184.1009 - Adipic acid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Adipic acid. 184.1009 Section 184.1009 Food and... Substances Affirmed as GRAS § 184.1009 Adipic acid. (a) Adipic acid (C6H10O4, CAS Reg. No. 00124-04-9) is also known as 1,4-butanedicarboxylic acid or hexane-dioic acid. It is prepared by nitric acid...

  14. Adipic acid enhanced limestone flue gas desulfurization process - an assessment

    SciTech Connect

    Mobley, J.D.; Chang, J.C.S.

    1981-12-01

    Adipic acid, when used as an additive in a limestone FGD system, greatly increases both SO/sub 2/ removal and limestone utilization. Most existing limestone scrubbers would benefit from adipic acid addition without major process changes. No significant operating problems or adverse environmental impacts have been identified. The adipic acid enhanced system is economically attractive. Waste dibasic acids and glycolic acid appear to provide benefits similar to adipic acid at a lower cost.

  15. A "hidden" co-crystal of caffeine and adipic acid.

    PubMed

    Bucar, Dejan-Kresimir; Henry, Rodger F; Lou, Xiaochun; Borchardt, Thomas B; Zhang, Geoff G Z

    2007-02-07

    Co-crystal formation between caffeine and adipic acid has been explored over the years without success; utilizing the newly developed co-crystal screening method, we have finally discovered this "hidden" caffeine and adipic acid co-crystal.

  16. Benzene-free synthesis of adipic acid.

    PubMed

    Niu, Wei; Draths, K M; Frost, J W

    2002-01-01

    Strains of Escherichia coli were constructed and evaluated that synthesized cis,cis-muconic acid from D-glucose under fed-batch fermentor conditions. Chemical hydrogenation of the cis,cis-muconic acid in the resulting fermentation broth has also been examined. Biocatalytic synthesis of adipic acid from glucose eliminates two environmental concerns characteristic of industrial adipic acid manufacture: use of carcinogenic benzene and benzene-derived chemicals as feedstocks and generation of nitrous oxide as a byproduct of a nitric acid catalyzed oxidation. While alternative catalytic syntheses that eliminate the use of nitric acid have been developed, most continue to rely on petroleum-derived benzene as the ultimate feedstock. In this study, E. coli WN1/pWN2.248 was developed that synthesized 36.8 g/L of cis,cis-muconic acid in 22% (mol/mol) yield from glucose after 48 h of culturing under fed-batch fermentor conditions. Optimization of microbial cis,cis-muconic acid synthesis required expression of three enzymes not typically found in E. coli. Two copies of the Klebsiella pneumoniae aroZ gene encoding DHS dehydratase were inserted into the E. coli chromosome, while the K. pneumoniae aroY gene encoding PCA decarboxylase and the Acinetobacter calcoaceticus catA gene encoding catechol 1,2-dioxygenase were expressed from an extrachromosomal plasmid. After fed-batch culturing of WN1/pWN2.248 was complete, the cells were removed from the broth, which was treated with activated charcoal and subsequently filtered to remove soluble protein. Hydrogenation of the resulting solution with 10% Pt on carbon (5% mol/mol) at 3400 kPa of H2 pressure for 2.5 h at ambient temperature afforded a 97% (mol/mol) conversion of cis,cis-muconic acid into adipic acid.

  17. Urea-adipic acid (2/1).

    PubMed

    Chang, Hai-Sheng; Lin, Jian-Li

    2011-06-01

    The asymmetric unit of the title co-crystal, 2CH(4)N(2)O·C(6)H(10)O(4), contains two urea mol-ecules and two half-mol-ecules of adipic acid; the latter are completed by crystallographic inversion symmetry. The crystal packing is stabilized by O-H⋯O and N-H⋯O hydrogen bonds, generating a chain along [110]. Additional weak inter-chain O-H⋯O and N-H⋯O inter-molecular inter-actions lead to the formation of a three-dimensional network.

  18. Toward biotechnological production of adipic acid and precursors from biorenewables.

    PubMed

    Polen, Tino; Spelberg, Markus; Bott, Michael

    2013-08-20

    Adipic acid is the most important commercial aliphatic dicarboxylic acid in the chemical industry and is primarily used for the production of nylon-6,6 polyamide. The current adipic acid market volume is about 2.6 million tons/y and the average annual demand growth rate forecast to stay at 3-3.5% worldwide. Hitherto, the industrial production of adipic acid is carried out by petroleum-based chemo-catalytic processes from non-renewable fossil fuels. However, in the past years, efforts were made to find alternative routes for adipic acid production from renewable carbon sources by biotechnological processes. Here we review the approaches and the progress made toward bio-based production of adipic acid.

  19. Bis(2,6-diamino-pyridinium)-adipate-adipic acid-water (2/1/1/2).

    PubMed

    Karadayı, Nevzat

    2007-12-18

    The crystal structure of the title compound, 2C(5)H(8)N(3) (+)·C(6)H(8)O(4) (2-)·C(6)H(10)O(4)·2H(2)O, consists of amino-pyridinium cations, adipate dianions, adipic acid mol-ecules and disordered solvent water mol-ecules [occupancies 0.50 (4) and 0.50 (4)]. Both the adipate and adipic acid are located across inversion centres. Eight-membered hydrogen-bonded rings exist involving amino-pyridinium and adipate ions. Adipic acid mol-ecules and adipate anions are linked into zigzag supra-molecular chains by O-H⋯O hydrogen bonds.

  20. Alternative control techniques document: Nitric and adipic acid manufacturing plants

    SciTech Connect

    Lazzo, D.W.

    1991-12-01

    The Alternative Control Techniques document describes available control techniques for reducing NOx emission levels from nitric and adipic acid manufacturing plants. The document contains information on the formation of NOx and uncontrolled NOx emissions from nitric and adipic acid plants. The following NOx control techniques for nitric acid plants are discussed: extended absorption, nonselective catalytic reduction (NSCR), and selective catalytic reduction (SCR). The following NOx control techniques for adipic acid plants are discussed: extended absorption and thermal reduction. For each control technique, achievable controlled NOx emission levels, capital and annual costs, cost effectiveness, and environmental and energy impacts are presented.

  1. Metabolic engineering strategies to bio-adipic acid production.

    PubMed

    Kruyer, Nicholas S; Peralta-Yahya, Pamela

    2017-03-30

    Adipic acid is the most industrially important dicarboxylic acid as it is a key monomer in the synthesis of nylon. Today, adipic acid is obtained via a chemical process that relies on petrochemical precursors and releases large quantities of greenhouse gases. In the last two years, significant progress has been made in engineering microbes for the production of adipic acid and its immediate precursors, muconic acid and glucaric acid. Not only have the microbial substrates expanded beyond glucose and glycerol to include lignin monomers and hemicellulose components, but the number of microbial chassis now goes further than Escherichia coli and Saccharomyces cerevisiae to include microbes proficient in aromatic degradation, cellulose secretion and degradation of multiple carbon sources. Here, we review the metabolic engineering and nascent protein engineering strategies undertaken in each of these chassis to convert different feedstocks to adipic, muconic and glucaric acid. We also highlight near term prospects and challenges for each of the metabolic routes discussed.

  2. 40 CFR 721.10295 - IPDI modified isophthalic acid, neopentyl glycol and adipic acid (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., neopentyl glycol and adipic acid (generic). 721.10295 Section 721.10295 Protection of Environment..., neopentyl glycol and adipic acid (generic). (a) Chemical substances and significant new uses subject to... glycol and adipic acid (PMN P-11-591) is subject to reporting under this section for the significant...

  3. 40 CFR 721.10295 - IPDI modified isophthalic acid, neopentyl glycol and adipic acid (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., neopentyl glycol and adipic acid (generic). 721.10295 Section 721.10295 Protection of Environment..., neopentyl glycol and adipic acid (generic). (a) Chemical substances and significant new uses subject to... glycol and adipic acid (PMN P-11-591) is subject to reporting under this section for the significant...

  4. 40 CFR 721.10295 - IPDI modified isophthalic acid, neopentyl glycol and adipic acid (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., neopentyl glycol and adipic acid (generic). 721.10295 Section 721.10295 Protection of Environment..., neopentyl glycol and adipic acid (generic). (a) Chemical substances and significant new uses subject to... glycol and adipic acid (PMN P-11-591) is subject to reporting under this section for the significant...

  5. Dietary adipic acid reduces ammonia emission from swine excreta.

    PubMed

    van Kempen, T A

    2001-09-01

    Adipic acid is only partially catabolized when it is fed to animals, and a portion of it is excreted in urine. The excreted portion may lower urinary pH and, as a result, ammonia emission. The present study tested this hypothesis. In Exp. 1, nursery pigs (n = 14) were fed (for a period of 7 d) either a standard nursery diet or the same diet supplemented with 1% adipic acid to assess effects on urinary pH (collected on d 5 or 6) and in vitro ammonia emission from the collected urine samples that were mixed with control feces. In Exp. 2, grower pigs housed 10 each in one of two chambers were fed a control diet or the same diet supplemented with 1% adipic acid. Ventilated air was quantified and analyzed for ammonia using Fourier transform infrared spectroscopy to determine the effects of feeding 1% adipic acid on ammonia emission. The results from Exp. 1 showed that adipic acid strongly reduced urinary pH (from 7.7 to 5.5, P < 0.05). In vitro ammonia emission from these urine samples was significantly reduced at all the time points evaluated (1, 3, 18, and 46 h with reductions of 94, 93, 70, and 39%, respectively, P < 0.05). Experiment 2 showed that adipic acid supplementation reduced ammonia emission by 25% (P < 0.05), which corresponded to the predicted reduction in ammonia emission based on the reduction in manure pH observed. In conclusion, feeding adipic acid lowers urinary pH and reduces ammonia emission. The reduction in ammonia emission, though, does not correspond to the reduction in urinary pH but corresponds to the reduction in fecal pH as a result of mixing the urine and feces, in which feces act as a strong buffer.

  6. Adipic gets the acid test as flue gas scrubber additive

    SciTech Connect

    Miller, I.R.

    1980-02-11

    The first full-scale demonstration of adipic acid for such use, to be conducted early in the summer of 1980 in a 200 MW power plant burning high-sulfur coal, is designed to clarify the costs and show how to reduce losses of adipic acid via degradation. Adipic acid improves SO/sub 2/ removal by acting as a buffer to limit the pH drop normally occurring at the gas-liquid interface so that the higher SO/sub 2/ concentration in the surface film improves liquid-phase mass transfer; it also promotes higher limestone utilization. Prepared by the Tennessee Valley Authority, a preliminary economic analysis for a 500 MW plant burning 4% sulfur coal indicates that the addition of 1500 ppM of adipic acid (limestone at $7/ton and the acid at $840/ton) would raise SO/sub 2/ removal from 90 to 95%, reduce the total capital investment from $41.5 to $39.5 million, and have a first year revenue requirement of $19.9 million vs. $20.9 million without the acid. The large-scale trial will also help clarify concern over unpleasant odors that have been reported at test sites of the limestone/adipic system; valeric acid has been identified as the cause.

  7. Adipic acid increases plasma lysine but does not improve the efficiency of lysine utilization in swine.

    PubMed

    van Kempen, T A; van Heugten, E; Trottier, N L

    2001-09-01

    Adipic acid, upon catabolism, results in intermediates that bear a structural similarity to lysine degradation products. The objectives of this research were to determine whether adipic acid affects lysine concentrations in plasma and to evaluate whether adipic acid improves the efficiency of lysine utilization in pigs. In Exp. 1, nursery pigs (n = 14) were fed (for a period of 7 d) either a standard nursery diet or the same diet supplemented with 1% adipic acid to assess effects on plasma amino acid concentrations (plasma collected on d 7). In Exp. 2, nursery pigs (n = 56) were fed (for a period of 15 d) either a control diet or the same diet but deficient in either lysine, threonine, or tryptophan with or without supplemental adipic acid to assess the effects of adipic acid on the efficiency of amino acid utilization. The results from Exp. 1 showed that adipic acid increased plasma lysine (by 18%) but not alpha-amino adipic acid, an intermediate in lysine degradation. Experiment 2 demonstrated that adipic acid did not increase the efficiency of utilization of lysine, threonine, or tryptophan. The lack of effects on alpha-amino adipic acid in Exp. 1 and the lack of a positive effect on the efficiency of utilization of lysine, threonine, and tryptophan suggest that adipic acid does not inhibit the mitochondrial uptake of lysine and(or) its degradation in the mitochondrion. It is concluded that feeding adipic acid increases plasma lysine but does not improve the efficiency of lysine utilization.

  8. 40 CFR 721.10339 - Adipic acid, substituted propane, alkyldiol, acrylate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Adipic acid, substituted propane... Significant New Uses for Specific Chemical Substances § 721.10339 Adipic acid, substituted propane, alkyldiol... substance identified generically as adipic acid, substituted propane, alkyldiol, acrylate (PMN P-04-113)...

  9. 40 CFR 721.10339 - Adipic acid, substituted propane, alkyldiol, acrylate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Adipic acid, substituted propane... Significant New Uses for Specific Chemical Substances § 721.10339 Adipic acid, substituted propane, alkyldiol... substance identified generically as adipic acid, substituted propane, alkyldiol, acrylate (PMN P-04-113)...

  10. 40 CFR 721.10339 - Adipic acid, substituted propane, alkyldiol, acrylate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Adipic acid, substituted propane... Significant New Uses for Specific Chemical Substances § 721.10339 Adipic acid, substituted propane, alkyldiol... substance identified generically as adipic acid, substituted propane, alkyldiol, acrylate (PMN P-04-113)...

  11. Assemblies of cytosine within H-bonded network of adipic acid and citric acid

    NASA Astrophysics Data System (ADS)

    Das, Babulal; Baruah, Jubaraj B.

    2011-08-01

    Adipic acid binds to cytosine to form H-bonded discrete cytosine-cytosinium assemblies embedded in 1D infinite chain of adipic acid, whereas citric acid stabilizes trimeric cytosine-cytosinium assemblies having length of 19.44 Å stabilized between layered structures of citric acid molecules.

  12. 78 FR 20029 - Castor Oil, Polymer With Adipic Acid, Linoleic Acid, Oleic Acid and Ricinoleic Acid; Tolerance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-03

    ... AGENCY 40 CFR Part 180 Castor Oil, Polymer With Adipic Acid, Linoleic Acid, Oleic Acid and Ricinoleic..., polymer with adipic acid, linoleic acid, oleic acid and ricinoleic acid (CAS Reg. No. 1357486-09- 9) when used as an inert ingredient in a pesticide formulation. Advance Polymer Technology submitted a...

  13. FGD improves with adipic acid. [Flue gas desulfurization

    SciTech Connect

    Catalano, L.

    1982-07-01

    The addition of adipic acid to the limestone slurry in wet-scrubbing systems has been shown to enhance SO/sub 2/ collection and limestone utilisation whilst reducing operating costs. The results of demonstration tests carried out for the EPA on utility and industrial plants are presented.

  14. Effect of scrubbing operating conditions on adipic acid degradation. Final report February-August 1980

    SciTech Connect

    Chang, J.C.S.

    1981-02-01

    The report gives results of adipic acid degradation tests at EPA's IERL-RTP limestone SO2 scrubber, to investigate the effects of operating variables on unaccountable adipic acid loss. It was found that: (1) adipic acid degradation could not be totally quenched by only lowering the pH below 5.0; (2) pH change did significantly affect unaccountable adipic acid loss (other factors may increase the adipic acid degradation rate at both high and low pH); (3) an appreciable amount of adipic acid loss was caused by coprecipitation with calcium sulfite; and (4) forced oxidation could aggravate the adipic acid degradation loss even at pH below 5.0. Adipic acid loss could be reduced: at high sulfite concentrations (the adipic acid degradation rate could be decreased by lowering the destructive free radical concentrations by high total sulfite); in the presence of manganous ion at low pH (the metal ion might act as an inhibitor to the oxidative degradation reaction at low pH); and with high natural oxidation (the adipic acid coprecipitation loss might be reduced with the high natural oxidation). Adipic acid degradation (loss) data were compared from four different test facilities. Most of the data also support these conclusions.

  15. 76 FR 7703 - 1,4-Benzenedicarboxylic Acid, Dimethyl Ester, Polymer With 1,4-Butanediol, Adipic Acid, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-11

    ... AGENCY 40 CFR Part 180 1,4-Benzenedicarboxylic Acid, Dimethyl Ester, Polymer With 1,4- Butanediol, Adipic..., polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate (CAS Reg. No. 55231-08-8... residues of 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid,...

  16. Adipic acid enhanced flue gas desulfurization process for industrial boilers: Volume 1. Field test results. Project summary

    SciTech Connect

    Clarke, P.A.; Gerstle, R.W.; Henzel, D.S.; Mason, K.W.; Sabatini, S.R.

    1983-03-01

    Test results show that adding adipic acid to the limestone slurry significantly improved the SO/sub 2/ removal efficiency of the FGD system. Limited baseline data on operations with limestone only indicated a performance level of 55% SO/sub 2/ removal. Adding about 2200 ppM of adipic acid to the limestone scrubbing systems, the unit's level of performance increased to an average of 94.3% SO/sub 2/ removal which was maintained within a standard deviation of 2.2% over a 30-day test period during which boiler load was 70 to 130 million Btu/hr and gas throughput varied 300%.

  17. Disorder and twinning in molecular crystals: impurity-induced effects in adipic acid.

    PubMed

    Williams-Seton, L; Davey, R J; Lieberman, H F; Pritchard, R G

    2000-03-01

    The variation in physical properties of crystals grown in the presence of additives or impurities have previously been attributed to lattice disorder developed during crystallization. Adipic acid crystallized in the presence of a variety of stereochemically related impurities typifies such behavior with disorder manifest in variations of dissolution rates and enthalpies of solution and fusion. In this case the most extreme habit, produced by the presence of added monoalkanoic acids, is a rounded dumbbell that was suggested previously to be a twinned crystal. In this contribution such crystals are fully characterized both through their external morphology and by means of single crystal X-ray diffraction. These techniques show that these particles are not twinned but rather are disordered single crystals comprising a small number of slightly misaligned domains. The interaction between additive and substrate is modeled and new additives selected that induce the formation of true mechanical twins in adipic acid.

  18. Effect of milling on DSC thermogram of excipient adipic acid.

    PubMed

    Ng, Wai Kiong; Kwek, Jin Wang; Yuen, Aaron; Tan, Chin Lee; Tan, Reginald

    2010-03-01

    The purpose of this research was to investigate why and how mechanical milling results in an unexpected shift in differential scanning calorimetry (DSC) measured fusion enthalpy (Delta(fus)H) and melting point (T(m)) of adipic acid, a pharmaceutical excipient. Hyper differential scanning calorimetry (hyper-DSC) was used to characterize adipic acid before and after ball-milling. An experimental study was conducted to evaluate previous postulations such as electrostatic charging using the Faraday cage method, crystallinity loss using powder X-ray diffraction (PXRD), thermal annealing using DSC, impurities removal using thermal gravimetric analysis (TGA) and Karl Fischer titration. DSC thermograms showed that after milling, the values of Delta(fus)H and T(m) were increased by approximately 9% and 5 K, respectively. Previous suggestions of increased electrostatic attraction, change in particle size distribution, and thermal annealing during measurements did not explain the differences. Instead, theoretical analysis and experimental findings suggested that the residual solvent (water) plays a key role. Water entrapped as inclusions inside adipic acid during solution crystallization was partially evaporated by localized heating at the cleaved surfaces during milling. The correlation between the removal of water and melting properties measured was shown via drying and crystallization experiments. These findings show that milling can reduce residual solvent content and causes a shift in DSC results.

  19. Adipic acid-enhanced limestone flue gas desulfurization system commercial demonstration. [Missouri

    SciTech Connect

    Hargrove, O.W. Jr.; Colley, J.D.; Mobley, J.D.

    1981-01-01

    A full-scale demonstration carried out at Springfield, Mo City Utilities Southwest Power Plant in 1980-1981 on adipic acid enhanced limestone flue gas desulfurization system is reported. The major process findings during the demonstration are discussed. It is found that adipic acid is a viable means for improving SO/sub 2/ removal in scrubbers which are limited from a dissolved alkalinity standpoint. Dibasic acid (a mixture of glutaric, adipic, and succinic acids) is a technically viable alternative to adipic acid. 6 refs.

  20. Buffered flue gas scrubbing system using adipic acid by-product stream

    SciTech Connect

    Lester, J.H. Jr.; Danly, D.E.

    1983-12-27

    A by-product stream from the production of adipic acid from cyclohexane, containing glutaric acid, succinic acid and adipic acid, is employed as a buffer in lime or limestone flue gas scrubbing for the removal of sulfur dioxide from combustion gases.

  1. Phase diagram of a system of adipic, glutaric, and sebacic acids

    NASA Astrophysics Data System (ADS)

    Kolyado, A. V.; Alenova, S. M.; Garkushin, I. K.

    2016-06-01

    Adipic acid-glutaric acid, glutaric acid-sebacic acid, and adipic acid-sebacic acid binary systems are studied, along with an adipic acid-glutaric acid-sebacic acid ternary system. It is shown all of these systems are eutectic. Phase equilibria for the diagram elements of the binary systems and the ternary system are described. It is concluded that the above low-melting compounds can be recommended for use as working bodies in heat accumulators, and for preparing electrolytes used in the thin-layer anodic oxidation of aluminum alloys.

  2. Use of adipic acid to enhance flue gas desulfurization

    SciTech Connect

    Ostroff, N.; Laslo, D.

    1984-01-01

    From a chemical point of view, FGD is an acid-base neutralization reaction where the overall rate is balanced by the dissolution of (limestone) alkali, and the absorption of sulfur dioxide. The former occurs at a solid/liquid interface, and the latter occurs at a liquid/gas interface. The rate of each of these processes is determined by local conditions, notably, pH. The introduction of a buffering agent lowers the pH at the solid-liquid interface, thereby increasing the rate of limestone dissolution, and simultaneously, raises the pH at the liquid/gas interface, thereby increasing the rate of absorption. Studies performed during the past several years have established that adipic acid is the best available choice for application because of its unique combination of physical and chemical properties, and its price and availability. This paper discusses the theory of adipic acid enhancement and the mathematics used to describe these phenomena trace its history from the laboratory through full scale trials.

  3. Adipic and malonic acid aqueous solutions: surface tensions and saturation vapor pressures.

    PubMed

    Riipinen, Ilona; Koponen, Ismo K; Frank, Göran P; Hyvärinen, Antti-Pekka; Vanhanen, Joonas; Lihavainen, Heikki; Lehtinen, Kari E J; Bilde, Merete; Kulmala, Markku

    2007-12-20

    The surface tension of adipic aqueous solutions was measured as a function of temperature (T=278-313 K) and adipic acid mole fraction (X=0.000-0.003) using the Wilhelmy plate method. A parametrization fitted to these data is presented. The evaporation rates of binary water-malonic and water-adipic acid droplets were measured with a TDMA technique at different temperatures (T=293-300 K) and relative humidities (58-80%), and the saturation vapor pressures of subcooled liquid malonic and adipic acids were derived from the data using a binary evaporation model. The temperature dependence of the vapor pressures was obtained as least-squares fits to the derived vapor pressures: ln(Psat,l) (Pa)=220.2389-22634.96/T (K)-26.66767 ln T (K) for malonic acid and ln(Psat,l) (Pa)=140.6704-18230.97/T (K)-15.48011 ln T (K) for adipic acid.

  4. Form II of adipic acid-nicotinohydrazide (1/2).

    PubMed

    Lemmerer, Andreas; Bernstein, Joel; Kahlenberg, Volker

    2012-01-01

    The crystal structure of the title co-crystal, 2C(6)H(7)N(3)O·C(6)H(10)O(4), is a second polymorph, designated form II, of the co-crystal formed between the two mol-ecules [Lemmerer et al. (2011 ▶). CrystEngComm, 13, 55-59]. The asymmetric unit comprises one mol-ecule of nicotinic acid hydrazide, and one half-mol-ecule of adipic acid (the entire mol-ecule is completed by the application of a centre of inversion). In the crystal, mol-ecules assemble into a three-dimensional network of hydrogen bonds, formed by three N-H⋯O hydrogen bonds and one O-H⋯N hydrogen bond. The O-H⋯N hydrogen bond formed between the carboxyl group and the pyridine ring is supported by a C-H⋯O hydrogen bond.

  5. Theoretical interpretation of the line shape of crystalline adipic acid.

    PubMed

    Blaise, Paul; El-Amine Benmalti, Mohamed; Henri-Rousseau, Olivier

    2006-01-14

    A general quantum theoretical approach of the upsilon(X-H) IR line shape of cyclic dimers of weakly H-bonded species in the crystal state is proposed. In this model, the adiabatic approximation (allowing to separate the high-frequency motion from the slow one of the H-bond bridge) is performed for each separate H-bond bridge of the dimer and a strong nonadiabatic correction is introduced into the model via the resonant exchange between the fast-mode excited states of the two moieties. Quantum indirect damping and Fermi resonances are taken into account. The present model reduces satisfactorily to many models in the literature dealing with more special situations. It has been applied to the cyclic dimers of adipic acid in the crystal phase. It correctly fits the experimental line shape of the hydrogenated compound and predicts satisfactorily the evolution in the line shapes with temperature and the change in the line shape with isotopic substitution.

  6. Adipic acid enhanced flue gas desulfurization process for industrial boilers. Volume 2. Technical assessment. Project summary

    SciTech Connect

    Behrens, G.P.; Hargrove, O.W.

    1983-03-01

    The SO/sub 2/ removal efficiency with the adipic acid averaged 94.3% over a 30-day period, representing a significant improvement in the performance of the system using only limestone. Economic calculations for an industrial boiler adipic-acid-enhanced limestone FGD system indicate a slight reduction in both capital and operating expenses relative to a limestone-only system designed for 90% SO/sub 2/ control of 3.5% sulfur coal. The costs are competitive with the dual alkali system. The successful demonstration of the adipic-acid-enhanced limestone system increases the number of demonstrated technologies available to a potential user.

  7. Evaluation of adipic acid addition to a bench-scale Chiyoda Thoroughbred 121 FGD system. Final report

    SciTech Connect

    Behrens, G.P.

    1981-12-01

    An experimental laboratory study testing the effectiveness of adipic acid in the Chiyoda Thoroughbred 121 FGD system has been sponsored by the Electric Power Research Institute. Additionally, economic calculations for the cost effectiveness of usng adipic acid in a commercial scale CT-121 FGD system have been performed. The results of this study indicate that although adipic acid can increase the SO/sub 2/ removal capability of the CT-121 system, it is not an economically attractive process improvement. This result is due to the CT-121 process chemistry which minimizes limestone consumption and sludge volume without the need of adipic acid. These two areas realize major cost savings when adipic is used in a conventional limestone FGD system. The economic evaluation indicates even though a lower gas-side pressue drop is achieved when adipic acid is used, the savings in electrical costs are insufficient to offset the cost of adipic acid.

  8. 40 CFR 721.10395 - Fatty acids, C14-18 and C16-18 unsatd., polymers with adipic acid and triethanolamine, di-Me...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...., polymers with adipic acid and triethanolamine, di-Me sulfate-quaternized. 721.10395 Section 721.10395... Fatty acids, C14-18 and C16-18 unsatd., polymers with adipic acid and triethanolamine, di-Me sulfate... identified as fatty acids, C14-18 and C16-18 unsat., polymers with adipic acid and triethanolamine,...

  9. 40 CFR 721.10395 - Fatty acids, C14-18 and C16-18 unsatd., polymers with adipic acid and triethanolamine, di-Me...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...., polymers with adipic acid and triethanolamine, di-Me sulfate-quaternized. 721.10395 Section 721.10395... Fatty acids, C14-18 and C16-18 unsatd., polymers with adipic acid and triethanolamine, di-Me sulfate... identified as fatty acids, C14-18 and C16-18 unsat., polymers with adipic acid and triethanolamine,...

  10. 40 CFR 721.10395 - Fatty acids, C14-18 and C16-18 unsatd., polymers with adipic acid and triethanolamine, di-Me...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...., polymers with adipic acid and triethanolamine, di-Me sulfate-quaternized. 721.10395 Section 721.10395... Fatty acids, C14-18 and C16-18 unsatd., polymers with adipic acid and triethanolamine, di-Me sulfate... identified as fatty acids, C14-18 and C16-18 unsat., polymers with adipic acid and triethanolamine,...

  11. Bimetallic nanocatalysts for the conversion of muconic acid to adipic acid.

    PubMed

    Thomas, John Meurig; Raja, Robert; Johnson, Brian F G; O'Connell, Timothy J; Sankar, Gopinathan; Khimyak, Tetyana

    2003-05-21

    Adipic acid (2) production currently entails use and generation of environmentally harmful materials: an efficient catalyst, consisting of nanoparticles of Ru10Pt2 anchored within the pores of mesoporous silica, facilitates the production of (2) by hydrogenating muconic acid, that may be derived biocatalytically from D-glucose.

  12. Relationship between adipic acid concentration and the core symptoms of autism spectrum disorders.

    PubMed

    Puig-Alcaraz, Carmen; Fuentes-Albero, Milagros; Cauli, Omar

    2016-08-30

    Dicarboxylic acids are an important source of information about metabolism and potential physiopathological alterations in children with autism spectrum disorders (ASDs). We measured the concentration between dicarboxylic adipic and suberic acids in children with an ASD and typically-developing (TD) children and analyzed any relationships between the severity of the core symptoms of ASDs and other clinical features (drugs, supplements, drugs, or diet). The core symptoms of autism were evaluated using the DSM-IV criteria, and adipic acid and suberic acid were measured in urine samples. Overall, no increase in the concentration of adipic acid in children with ASDs compared to TD children, however when considering vitamin B supplementation in ASD there were significantly increased level of urinary adipic acid in children with an ASD not taking vitamin B supplementation compared to supplemented children or to TD children. No significant difference were observed in suberic acid. Interestingly, the increase in adipic acid concentration was significantly and indirectly correlated with the severity of the deficit in socialization and communication skills in children with an ASD. Therefore, therapeutic treatments aimed at decreasing adipic acid concentration might not be beneficial for treating the core symptoms of ASDs.

  13. Direct biosynthesis of adipic acid from a synthetic pathway in recombinant Escherichia coli.

    PubMed

    Yu, Jia-Le; Xia, Xiao-Xia; Zhong, Jian-Jiang; Qian, Zhi-Gang

    2014-12-01

    The C6 dicarboxylic acid, adipic acid, is an important platform chemical in industry. Biobased production of adipic acid is a promising alternative to the current petrochemical route. Here, we report biosynthesis of adipic acid using an artificial pathway inspired by the reversal of beta-oxidation of dicarboxylic acids. The biosynthetic pathway comprises condensation of acetyl-CoA and succinyl-CoA to form the C6 backbone and subsequent reduction, dehydration, hydrogenation, and release of adipic acid from its thioester. The pathway was first tested in vitro with reconstituted pathway enzymes and then functionally introduced into Escherichia coli for the biosynthesis and excretion of adipic acid into the culture medium. The production titer was increased by approximately 20-fold through the combination of recruiting enzymes that were more suitable to catalyze the synthetic reactions and increasing availability of the condensation substrates. This work demonstrates direct biosynthesis of adipic acid via non-natural synthetic pathway, which may enable its renewable production.

  14. Encapsulating fluorescein using adipic acid self-assembly on the surface of PPI-3 dendrimer.

    PubMed

    Chai, Minghui; Holley, Aaron K; Kruskamp, Michael

    2007-01-14

    A water-soluble self-assembly has been formed by associating adipic acid molecules onto the surface of the third generation poly(propyleneimine) dendrimer and this system has been used to encapsulate fluorescein.

  15. Study on the Effects of Adipic Acid on Properties of Dicyandiamide-Cured Electrically Conductive Adhesive and the Interaction Mechanism

    NASA Astrophysics Data System (ADS)

    Wang, Ling; Wan, Chao; Fu, Yonggao; Chen, Hongtao; Liu, Xiaojian; Li, Mingyu

    2014-01-01

    A small quantity of adipic acid was found to improve the performance of dicyandiamide-cured electrically conductive adhesive (ECA) by enhancing its electrical conductivity and mechanical properties. The mechanism of action of the adipic acid and its effects on the ECA were examined. The results indicated that adipic acid replaced the electrically insulating lubricant on the surface of the silver flakes, which significantly improved the electrical conductivity. Specifically, one of the acidic functional groups in adipic acid reacted with the silver flakes, and an amidation reaction occurred between the other acidic functional group in adipic acid and the dicyandiamide, which participated in the curing reaction. Therefore, adipic acid may act as a coupling agent to improve the overall ECA performance.

  16. Effect of trace metals and sulfite oxidation of adipic acid degradation in FGD systems. Final report Dec 81-May 82

    SciTech Connect

    Jarvis, J.B.; Terry, J.C.; Schubert, S.A.; Utley, B.L.

    1982-12-01

    The report gives results of the measurement of the adipic acid degradation rate in a bench-scale flue gas desulfurization (FGD) system, designed to simulate many of the important aspects of full-scale FGD systems. Results show that the adipic acid degradation rate depends on the sulfite oxidation rate, the adipic acid concentration, the presence of manganese in solution, and temperature. The degradation rate is also affected by pH, but only when manganese is present. Adipic acid degradation products identified in the liquid phase include valeric, butyric, propionic, succinic, and glutaric acids. When manganese was present, the predominant degradation products were succinic and glutaric acids. Analysis of solids from the bench scale tests shows large concentrations of coprecipitated adipic acid in low oxidation sulfite solids. By contrast, low quantities of coprecipitated adipic acid were found in high oxidation gypsum solids.

  17. One-pot room-temperature conversion of cyclohexane to adipic acid by ozone and UV light.

    PubMed

    Hwang, Kuo Chu; Sagadevan, Arunachalam

    2014-12-19

    Nitric acid oxidation of cyclohexane accounts for ~95% of the worldwide adipic acid production and is also responsible for ~5 to 8% of the annual worldwide anthropogenic emission of the ozone-depleting greenhouse gas nitrous oxide (N2O). Here we report a N2O-free process for adipic acid synthesis. Treatment of neat cyclohexane, cyclohexanol, or cyclohexanone with ozone at room temperature and 1 atmosphere of pressure affords adipic acid as a solid precipitate. Addition of acidic water or exposure to ultraviolet (UV) light irradiation (or a combination of both) dramatically enhances the oxidative conversion of cyclohexane to adipic acid.

  18. Boosting one-step conversion of cyclohexane to adipic acid by NO2 and VPO composite catalysts.

    PubMed

    Jian, Jian; You, Kuiyi; Duan, Xuezhi; Gao, Hongxu; Luo, Qing; Deng, Renjie; Liu, Pingle; Ai, Qiuhong; Luo, He'an

    2016-02-25

    We demonstrate VPO composites as efficient catalysts for highly selective oxidation of cyclohexane to adipic acid with NO2. In particular, the Ni-Al-VPO composite catalyst exhibits the striking conversion of cyclohexane (60.6%) and exceptionally high selectivity towards adipic acid (85.0%). Moreover, N2O is an environmentally harmful gas, and its yield in the present process is only 0.03 t/t adipic acid, which is far below that obtained using the industrial method (0.3 t/t adipic acid). This work provides a new strategy for the one-step synthesis of dicarboxylic acids from cycloalkanes.

  19. A limited LCA of bio-adipic acid: manufacturing the nylon-6,6 precursor adipic acid using the benzoic acid degradation pathway from different feedstocks.

    PubMed

    van Duuren, J B J H; Brehmer, B; Mars, A E; Eggink, G; Dos Santos, V A P Martins; Sanders, J P M

    2011-06-01

    A limited life cycle assessment (LCA) was performed on a combined biological and chemical process for the production of adipic acid, which was compared to the traditional petrochemical process. The LCA comprises the biological conversion of the aromatic feedstocks benzoic acid, impure aromatics, toluene, or phenol from lignin to cis, cis-muconic acid, which is subsequently converted to adipic acid through hydrogenation. Apart from the impact of usage of petrochemical and biomass-based feedstocks, the environmental impact of the final concentration of cis, cis-muconic acid in the fermentation broth was studied using 1.85% and 4.26% cis, cis-muconic acid. The LCA focused on the cumulative energy demand (CED), cumulative exergy demand (CExD), and the CO(2) equivalent (CO(2) eq) emission, with CO(2) and N(2) O measured separately. The highest calculated reduction potential of CED and CExD were achieved using phenol, which reduced the CED by 29% and 57% with 1.85% and 4.26% cis, cis-muconic acid, respectively. A decrease in the CO(2) eq emission was especially achieved when the N(2) O emission in the combined biological and chemical process was restricted. At 4.26% cis, cis-muconic acid, the different carbon backbone feedstocks contributed to an optimized reduction of CO(2) eq emissions ranging from 14.0 to 17.4 ton CO(2) eq/ton adipic acid. The bulk of the bioprocessing energy intensity is attributed to the hydrogenation reactor, which has a high environmental impact and a direct relationship with the product concentration in the broth.

  20. Effect of adipic dihydrazide modification on the performance of collagen/hyaluronic acid scaffold.

    PubMed

    Zhang, Ling; Xiao, Yumei; Jiang, Bo; Fan, Hongsong; Zhang, Xingdong

    2010-02-01

    Collagen and hydrazide-functionalized hyaluronic acid derivatives were hybridized by gelating and genipin crosslinking to form composite hydrogel. The study contributed to the understanding of the effects of adipic dihydrazide modification on the physicochemical and biological properties of the collagen/hyaluronic acid scaffold. The investigation included morphology observation, mechanical measurement, swelling evaluation, and collagenase degradation. The results revealed that the stability of composites was increased through adipic dihydrazide modification and genipin crosslinking. The improved biocompatibility and retention of hyaluronic acid made the composite material more favorable to chondrocytes growing, suggesting the prepared scaffold might be high potential for chondrogenesis.

  1. X-ray studies of crystalline complexes involving amino acids and peptides. XLIII. Adipic acid complexes of L- and DL-lysine.

    PubMed

    Sharma, Alok; Thamotharan, S; Roy, Siddhartha; Vijayan, M

    2006-03-01

    The asymmetric unit of the DL-lysine complex of adipic acid [bis(DL-lysinium) adipate], 2C6H15N2O2+.C6H8O(4)2-, contains a zwitterionic singly charged lysinium cation and half a doubly charged adipate anion (the complete anion has inversion symmetry). That of the L-lysine complex (lysinium hydrogen adipate), C6H15N2O2+.C6H9O4-, consists of a lysinium cation and a singly charged hydrogen adipate anion. In both structures, the lysinium cations organize into layers interconnected by adipate or hydrogen adipate anions. However, the arrangement of the molecular ions in the layer is profoundly different in the DL- and L-lysine complexes. The hydrogen adipate anions in the L-lysine complex form linear arrays in which adjacent ions are interconnected by a symmetric O...H...O hydrogen bond.

  2. Isolated adipic aciduria.

    PubMed

    Hasbini, D A; Mikati, M A; Habbal, Z M

    2001-01-01

    Adipic acid can appear, in combination with other dicarboxylic acids, in the urine of patients in a number of underlying metabolic diseases. A child with seizures and mental retardation of unknown etiology who was found to have elevated isolated adipic aciduria on investigation for metabolic diseases is reported. A dietary artifact was suspected, and the adipic aciduria resolved after the child was kept on a specific restricted diet for 3 days. This is the third report of isolated adipic aciduria secondary to food. Findings confirm the previous reports of dietary origin of isolated adipic aciduria and should alert clinicians to such artifact before committing patients to unnecessary treatments.

  3. Properties of collagen gels cross-linked by N-hydroxysuccinimide activated adipic acid deriviate.

    PubMed

    Duan, Lian; Liu, Wentao; Tian, Zhenhua; Li, Conghu; Li, Guoying

    2014-08-01

    In order to improve the properties of collagen gel, N-hydroxysuccinimide activated adipic acid derivative (NHS-AA) was introduced into the formation of collagen fibrils. NHS-AA with different [NHS-AA]/[NH2] ratios (0.1-1.5, calculated by [ester group] of NHS-AA and [NH2] of lysine and hydroxylysine residues of collagen) was added after, simultaneously with or before the formation of collagen fibrils (abbreviated CAF, CSF and CBF, respectively) to obtain different collagen gels. With the same dose of NHS-AA, the cross-linking degree for CAF was lower than those for CSF and CBF. The formation of collagen fibrils was restrained by NHS-AA for CSF and CBF while that for CAF was unaffected. When the dose of NHS-AA increased from 0.1 to 1.5, the water contents of CSF and CBF increased while that of CAF had no obvious change. With lower dose of NHS-AA (0.1), CAF possessed higher value of G' (87.3Pa) and the best thermal stability (47.6°C). As the ratio of [NHS-AA]/[NH2] increased to 1.5, CSF had the maximum value of G' (288.8Pa) and CAF had the best thermal stability (52.9°C). These results showed collagen gels with different properties could be prepared by adding NHS-AA with different adding sequence and dose.

  4. Properties of alkali-solubilized collagen solution crosslinked by N-hydroxysuccinimide activated adipic acid

    NASA Astrophysics Data System (ADS)

    Chen, Yihui; Zhang, Min; Liu, Wentao; Li, Guoying

    2011-03-01

    The effect of N-hydroxysuccinimide activated adipic acid (NHS-AA) on the properties of alkali-solubilized collagen solutions was examined. The residual amino group content in crosslinked collagen, determined by trinitrobenzensulfonic acid (TNBS) assay, was decreased with increasing NHS-AA concentration. The results from differential scanning calorimeter (DSC) indicated that the maximum denaturation temperature ( T d) of crosslinked collagen solution was about 4.2°C higher than that of un-crosslinked collagen solution (36.6°C). Moreover, the values of storage modulus ( G'), loss modulus ( G″) and complex viscosity ( η*), obtained by means of dynamic frequency sweeps, were increased as NHS-AA concentration added up to 1.5 mM, and then decreased slightly when further increased NHS-AA concentration. Besides, for collagen solution crosslinked with 1.5 mM NHS-AA, dynamic denaturation temperature ( T dd) was about 1.1°C lower than T d (40.8°C), and the Arrhenius-type time-temperature superposition (TTS) principle was applied to yield the activation energy to be 474.4 kJmol-1.

  5. Highly efficient chemical process to convert mucic acid into adipic acid and DFT studies of the mechanism of the rhenium-catalyzed deoxydehydration.

    PubMed

    Li, Xiukai; Wu, Di; Lu, Ting; Yi, Guangshun; Su, Haibin; Zhang, Yugen

    2014-04-14

    The production of bulk chemicals and fuels from renewable bio-based feedstocks is of significant importance for the sustainability of human society. Adipic acid, as one of the most-demanded drop-in chemicals from a bioresource, is used primarily for the large-volume production of nylon-6,6 polyamide. It is highly desirable to develop sustainable and environmentally friendly processes for the production of adipic acid from renewable feedstocks. However, currently there is no suitable bio-adipic acid synthesis process. Demonstrated herein is the highly efficient synthetic protocol for the conversion of mucic acid into adipic acid through the oxorhenium-complex-catalyzed deoxydehydration (DODH) reaction and subsequent Pt/C-catalyzed transfer hydrogenation. Quantitative yields (99 %) were achieved for the conversion of mucic acid into muconic acid and adipic acid either in separate sequences or in a one-step process.

  6. A study on reactive blending of (poly lactic acid) and poly (butylene succinate co adipate)

    NASA Astrophysics Data System (ADS)

    Bureepukdee, C.; Suttiruengwong, S.; Seadan, M.

    2015-07-01

    This research aims to study the blending of Polylactic acid (PLA) and Polybutylene succinate co adipate (PBSA) in order to understand the role of peroxide in free radical reaction on the compatibilization between these two biodegradable polyesters. Various ratios of PLA/PBSA blends with and without reactive agents were prepared in the twin screw extruder. Two types of peroxides, Di (tert-butylperoxyisopropyl) benzene (DTBP) and 2, 5-Dimethyl-2, 5-(t-butylperoxy) hexane (DTBH), were used with various concentrations to compare. From the torques measurement, DTBP was more reactive with PLA and PBSA than DTBH. PLA and PBSA 80:20, 60:40, 50:50, 40:60, and 20:80% by weight were melt-blended in a twin screw extruder. The reactive polymer blends were also prepared for the same ratios of the blends with addition of 0.08 and 0.1 phr of DTBP. The mechanical, thermal, rheological, and morphological properties were investigated. The impact strengths of the non-reactive blend increased with the increasing in PBSA content. The optimal impact strength was obtained at 40%wt of PBSA with 0.1 phr of DTBP. Adding 0.08 and 0.1 phr of DTBP led to the co continuous phase morphology of PLA/PBSA blends. The per cent crystallinity of PLA increased when blended with PBSA. PBSA might induce the crystallization of PLA.

  7. Capsule report: Adipic acid-enhanced lime/limestone test results at the EPA alkali scrubbing test facility

    SciTech Connect

    Burbank, D.A.; Wang, S.C.

    1982-04-01

    The fifth in a series of reports describing the results of the Shawnee Lime and Limestone Wet Scrubbing Test Program, the report describes the results of adipic acid-enhanced limestone wet scrubbing systems. A primary objective of the program was to enhance sulfur oxide removal and improve the reliability and economics of lime and limestone wet scrubbing systems by use of adipic acid as a chemical additive.

  8. Preparation of Nanocellulose Reinforced Chitosan Films, Cross-Linked by Adipic Acid

    PubMed Central

    Falamarzpour, Pouria; Behzad, Tayebeh; Zamani, Akram

    2017-01-01

    Adipic acid, an abundant and nontoxic compound, was used to dissolve and cross-link chitosan. After the preparation of chitosan films through casting technique, the in situ amidation reaction was performed at 80–100 °C as verified by Fourier transform infrared (FT-IR). The reaction was accompanied by the release of water which was employed to investigate the reaction kinetics. Accordingly, the reaction rate followed the first-order model and Arrhenius equation, and the activation energy was calculated to be 18 kJ/mol. Furthermore, the mechanical properties of the chitosan films were comprehensively studied. First, optimal curing conditions (84 °C, 93 min) were introduced through a central composite design. In order to evaluate the effects of adipic acid, the mechanical properties of physically cross-linked (uncured), chemically cross-linked (cured), and uncross-linked (prepared by acetic acid) films were compared. The use of adipic acid improved the tensile strength of uncured and chemically cross-linked films more than 60% and 113%, respectively. Finally, the effect of cellulose nanofibrils (CNFs) on the mechanical performance of cured films, in the presence of glycerol as a plasticizer, was investigated. The plasticized chitosan films reinforced by 5 wt % CNFs showed superior properties as a promising material for the development of chitosan-based biomaterials. PMID:28208822

  9. Preparation of Nanocellulose Reinforced Chitosan Films, Cross-Linked by Adipic Acid.

    PubMed

    Falamarzpour, Pouria; Behzad, Tayebeh; Zamani, Akram

    2017-02-13

    Adipic acid, an abundant and nontoxic compound, was used to dissolve and cross-link chitosan. After the preparation of chitosan films through casting technique, the in situ amidation reaction was performed at 80-100 °C as verified by Fourier transform infrared (FT-IR). The reaction was accompanied by the release of water which was employed to investigate the reaction kinetics. Accordingly, the reaction rate followed the first-order model and Arrhenius equation, and the activation energy was calculated to be 18 kJ/mol. Furthermore, the mechanical properties of the chitosan films were comprehensively studied. First, optimal curing conditions (84 °C, 93 min) were introduced through a central composite design. In order to evaluate the effects of adipic acid, the mechanical properties of physically cross-linked (uncured), chemically cross-linked (cured), and uncross-linked (prepared by acetic acid) films were compared. The use of adipic acid improved the tensile strength of uncured and chemically cross-linked films more than 60% and 113%, respectively. Finally, the effect of cellulose nanofibrils (CNFs) on the mechanical performance of cured films, in the presence of glycerol as a plasticizer, was investigated. The plasticized chitosan films reinforced by 5 wt % CNFs showed superior properties as a promising material for the development of chitosan-based biomaterials.

  10. Theoretical insights into heme-catalyzed oxidation of cyclohexane to adipic acid.

    PubMed

    Noack, Holger; Georgiev, Valentin; Blomberg, Margareta R A; Siegbahn, Per E M; Johansson, Adam Johannes

    2011-02-21

    Adipic acid is a key compound in the chemical industry, where it is mainly used in the production of polymers. The conventional process of its generation requires vast amounts of energy and, moreover, produces environmentally deleterious substances. Thus, there is interest in alternative ways to gain adequate amounts of adipic acid. Experimental reports on a one-pot iron-catalyzed conversion of cyclohexane to adipic acid motivated a theoretical investigation based on density functional theory calculations. The process investigated is interesting because it requires less energy than contemporary methods and does not produce environmentally harmful side products. The aim of the present contribution is to gain insight into the mechanism of the iron-catalyzed cyclohexane conversion to provide a basis for the further development of this process. The rate-limiting step of the process is discussed, but considering the accuracy of the calculations, it is difficult to ensure whether the rate-limiting step is in the substrate oxidation or in the generation of the catalytically active species. It is shown that the slowest step in the substrate oxidation is the conversion of cyclohexanol to cyclohexane-1,2-diol. Hydrogen-atom transfer from one of the OH groups of cyclohexane-1,2-diol makes the intradiol cleavage occur spontaneously.

  11. Oxidation-resistant acidic resins prepared by partial carbonization as cocatalysts in synthesis of adipic acid.

    PubMed

    Wei, Huijuan; Li, Hongbian; Liu, Yangqing; Jin, Peng; Wang, Xiangyu; Li, Baojun

    2012-08-01

    The oxidation-resistant acidic resins are of great importance for the catalytic oxidation systems. In this paper, the oxidatively stable acidic resins are obtained from the cation ion exchange resins (CIERs) through the thermal treatment in N(2) atmosphere. The structure and properties of the thermally treated CIERs were characterized by chemical analysis, Fourier transform infrared (FT-IR) spectra, acid capacity measurement and scanning electron microscope (SEM). The thermally treated CIERs possess high acid capacity up to 4.09 mmol g(-1). A partial carbonization is observed in the thermal treatment process of CIERs, but the morphology of resin spheres maintains well. The as-prepared CIERs are used as solid acids to assist the hydrogen peroxide oxidation of cyclohexene to adipic acid (ADA) with tungstic acid as the catalyst precursor. The improved yields of ADA in the recycling reaction are obtained in the presence of acidic CIERs. Meanwhile, the unproductive decomposition of H(2)O(2) is effectively suppressed. The high yields of ADA (about 81%) are kept by the thermally treated CIERs even after the fifth cycle. The thermally treated CIERs exhibit excellent acid-catalytic performance and possess remarkable oxidation-resistant capability.

  12. Full-scale utility FGD (flue gas desulfurization) system adipic acid demonstration program. Volume 1. Process results. Final report Jun 80-Nov 82

    SciTech Connect

    Hargrove, O.W. Jr; Colley, J.D.; Glover, R.L.; Owen, M.L.

    1983-06-01

    The report culminates a series of projects sponsored by the EPA, investigating the use of adipic acid as an additive to enhance SO/sub 2/ removal in aqueous flue gas desulfurization (FGD) systems, using limestone reagent. A 9-month program at the 194-MW Southwest Power Plant (SWPP) of City Utilities, Springfield, MO, demonstrated the effectiveness of adipic acid and dibasic acids (the latter, by-products of the production of adipic acid). The program examined the effect of adipic acid addition on a limestone FGD system under natural and forced-oxidation modes of operation.

  13. Full-scale utility FGD (flue gas desulfurization) system adipic acid demonstration program. Volume 2. Continuous emissions monitoring results. Final report Jun 80-Nov 82

    SciTech Connect

    Hargrove, O.W. Jr.; Colley, J.D.; Glover, R.L.; Owen, M.L.

    1983-06-01

    The report culminates a series of projects sponsored by the EPA, investigating the use of adipic acid as an additive to enhance SO/sub 2/ removal in aqueous flue gas desulfurization (FGD) systems, using limestone reagent. A 9-month program at the 194-MW Southwest Power Plant (SWPP) of City Utilities, Springfield, MO, demonstrated the effectiveness of adipic acid and dibasic acids (the latter, by-products of the production of adipic acid). The program examined the effect of adipic acid addition on a limestone FGD system under natural and forced-oxidation modes of operation.

  14. cis,cis-Muconic acid: separation and catalysis to bio-adipic acid for nylon-6,6 polymerization

    SciTech Connect

    Vardon, Derek R.; Rorrer, Nicholas A.; Salvachúa, Davinia; Settle, Amy E.; Johnson, Christopher W.; Menart, Martin J.; Cleveland, Nicholas S.; Ciesielski, Peter N.; Steirer, K. Xerxes; Dorgan, John R.; Beckham, Gregg T.

    2016-01-01

    cis,cis-Muconic acid is a polyunsaturated dicarboxylic acid that can be produced renewably via the biological conversion of sugars and lignin-derived aromatic compounds. Subsequently, muconic acid can be catalytically converted to adipic acid -- the most commercially significant dicarboxylic acid manufactured from petroleum. Nylon-6,6 is the major industrial application for adipic acid, consuming 85% of market demand; however, high purity adipic acid (99.8%) is required for polymer synthesis. As such, process technologies are needed to effectively separate and catalytically transform biologically derived muconic acid to adipic acid in high purity over stable catalytic materials. To that end, this study: (1) demonstrates bioreactor production of muconate at 34.5 g L-1 in an engineered strain of Pseudomonas putida KT2440, (2) examines the staged recovery of muconic acid from culture media, (3) screens platinum group metals (e.g., Pd, Pt, Rh, Ru) for activity and leaching stability on activated carbon (AC) and silica supports, (4) evaluates the time-on-stream performance of Rh/AC in a trickle bed reactor, and (5) demonstrates the polymerization of bio-adipic acid to nylon-6,6. Separation experiments confirmed AC effectively removed broth color compounds, but subsequent pH/temperature shift crystallization resulted in significant levels of Na, P, K, S and N in the crystallized product. Ethanol dissolution of muconic acid precipitated bulk salts, achieving a purity of 99.8%. Batch catalysis screening reactions determined that Rh and Pd were both highly active compared to Pt and Ru, but Pd leached significantly (1-9%) from both AC and silica supports. Testing of Rh/AC in a continuous trickle bed reactor for 100 h confirmed stable performance after 24 h, although organic adsorption resulted in reduced steady-state activity. Lastly, polymerization of bio-adipic acid with hexamethyldiamine produced nylon-6,6 with comparable properties to its petrochemical counterpart

  15. The adipic acid enhanced flue gas desulfurization process for industrial boilers. Volume 1. Field test results. Final report Feb 81-Feb 82

    SciTech Connect

    Clarke, P.A.; Gerstle, R.W.; Henzel, D.S.; Mason, K.W.; Sabatini, S.R.

    1982-11-01

    The report gives results of an evaluation of the effect of adding adipic acid on the SO/sub 2/ removal of a wet limestone flue gas desulfurization (FGD) system on a coal-fired industrial boiler at Rickenbacker Air National Guard Base near Columbus, OH. Emission data were collected in accordance with the regulations for SO/sub 2/ compliance data specified in the Federal Register. The test results show that adding adipic acid to the limestone slurry significantly improved the SO/sub 2/ removal efficiency of the FGD system. Limited baseline data on operations with limestone only indicated a performance level of 55% SO/sub 2/ removal. With the addition of about 2200 ppm of adipic acid to the limestone scrubbing system, the unit's level of performance increased to an average of 94.3% SO/sub 2/ removal (within a standard deviation of 2.2%) during which boiler load was 70-130 million Btu/hr and gas throughput varied 300%.

  16. AFM studies of the crystallization and habit modification of an excipient material, adipic acid.

    PubMed

    Keel, T R; Thompson, C; Davies, M C; Tendler, S J B; Roberts, C J

    2004-08-06

    Atomic force microscopy (AFM) has been used to investigate the (1 0 0) face of crystalline adipic acid, both in air and liquid environments. In air, surface reorganization occurred during scanning of the AFM probe, which has been investigated using single point force-distance analysis under a controlled relative humidity (RH) environment. We suggest such reorganization can be attributed to the influence of a network of water molecules bound to the hydrophilic (1 0 0) surface permitting local AFM tip-enhanced dissolution and reorganization of the solute. In situ imaging was also carried out on the crystals, revealing etch-pit formation during dissolution, and rapid growth at higher levels of supersaturation (sigma), both of which are direct consequences of the hydrophilic nature of the (1 0 0) face. Also presented here are nanoscale observations of the effect of octanoic acid, a structurally-related habit modifier, on crystalline adipic acid. Using AFM, we have been able to show that the presence of octanoic acid at low concentration has little observable affect on the development of the (1 0 0) face; however, as this concentration is increased, there are clear changes in step morphology and growth mode on the (1 0 0) face of the crystal. At a concentration of 1.26 mmol dm(-3) (a concentration corresponding to a molar ratio of approximately 1:175 octanoic acid:adipic acid), growth on the (1 0 0) face is inhibited, with in situ AFM imaging indicating this is a direct consequence of octanoic acid binding to the surface, and pinning the monomolecular growth steps.

  17. Synthesis and characterization of copolyanhydrides of carbohydrate-based galactaric acid and adipic acid.

    PubMed

    Mehtiö, Tuomas; Nurmi, Leena; Rämö, Virpi; Mikkonen, Hannu; Harlin, Ali

    2015-01-30

    A series of copolyanhydrides, consisting of 2,3,4,5-tetra-O-acetylgalactaric acid (AGA) and adipic acid (AA) as monomer units, was polymerized. Synthesis of AGA monomer consisted of two steps. First, O-acetylation of galactaric acid secondary hydroxyl groups was performed using acetic anhydride as a reagent. Acetic anhydride was then further used as a reagent in the synthesis of diacetyl mixed anhydride of AGA. Polymerizations were conducted as bulk condensation polymerization at 150 °C. Thermal properties of the copolymers varied depending on monomer composition. Increase in the AGA content had a clear increasing effect on the Tg. A similar increasing effect was observed in Tm. The degree of crystallinity decreased as AGA content increased. There was a slightly lowering tendency in the molecular weights of the obtained polymers when the AGA content in the polymerization mixtures increased. The described synthesis route shows that bio-based aldaric acid monomers are potential candidates for the adjustment of thermal properties of polyanhydrides.

  18. Correlation of hydrolytic degradation with structure for copolyesters produced from glycolic and adipic acids.

    PubMed

    Simitzis, J; Triantou, D; Soulis, S; Triantou, K; Simitzis, Ch; Zoumpoulakis, L

    2010-04-01

    Copolyesters based on glycolic acid (G) combined with adipic acid (A) and ethylene glycol (E) were synthesized in different percentage of molar ratios (A: 100-50% and G: 100%) and their hydrolytic degradation was studied and correlated with their structures. According to the DSC, the production of polyesters leads to the formation of copolyesters and not to mixtures of homopolyesters. The crystallites in the copolyesters mainly consist of continuous sequences of ethylene adipate structural units. The hydrolytic degradation of the polyesters was followed by their weight loss during hydrolysis and by the FTIR spectra of the initial polyesters compared with that of the degraded polyesters at equilibrium. The region between 1142 and 800 cm(-1) can be utilized to evaluate the extent of degradation of polyesters after their hydrolysis. The absorption bands at 1142, 1077 and 850 cm(-1) due to the amorphous region decrease after hydrolysis, whereas those at 972, 901 and 806 cm(-1) due to the crystalline region increase. The experimental data of the hydrolytic degradation were fitted with exponential rise to maximum type functions using two-parameter model, which describes very well mainly the initial part of the degradation, and four-parameter model (containing two exponential terms), which is appropriate for fitting the hydrolytic degradation on the entire time period (including the equilibrium). Furthermore, the kinetics of the hydrolytic degradation of the polyesters for the initial time period based on both models results to similar values of the rate constant, k. The synthesized copolyesters of glycolic acid combined with adipic acid and ethylene glycol are soluble in many common organic solvents opposite to PGA, leading to modified biodegradable polyesters and therefore they can be easily processed.

  19. Injectable oxidized hyaluronic acid/adipic acid dihydrazide hydrogel for nucleus pulposus regeneration.

    PubMed

    Su, Wen-Yu; Chen, Yu-Chun; Lin, Feng-Huei

    2010-08-01

    Injectable hydrogel allows irregular surgical defects to be completely filled, lessens the risk of implant migration, and minimizes surgical defects due to the solution-gel state transformation. Here, we first propose a method for preparing oxidized hyaluronic acid/adipic acid dihydrazide (oxi-HA/ADH) injectable hydrogel by chemical cross-linking under physiological conditions. Fourier transform infrared spectrometry and trinitrobenzene sulfonate assay were used to confirm the oxidation of hyaluronic acid. Rheological properties were measured to evaluate the working ability of the hydrogel for further clinical application. The oxi-HA/ADH in situ forming hydrogel can transform from liquid form into a gel-like matrix within 3-8 min, depending on the operational temperature. Furthermore, hydrogel degradation and cell assessment is also a concern for clinical application. Injectable oxi-HA/ADH8 hydrogel can maintain its gel-like state for at least 5 weeks with a degradation percentage of 40%. Importantly, oxi-HA/ADH8 hydrogel can assist in nucleus pulposus cell synthesis of type II collagen and aggrecan mRNA gene expression according to the results of real-time PCR analysis, and shows good biocompatibility based on cell viability and cytotoxicity assays. Based on the results of the current study, oxi-HA/ADH hydrogel may possess several advantages for future application in nucleus pulposus regeneration.

  20. An injectable oxidated hyaluronic acid/adipic acid dihydrazide hydrogel as a vitreous substitute.

    PubMed

    Su, Wen-Yu; Chen, Ko-Hua; Chen, Yu-Chun; Lee, Yen-Hsien; Tseng, Ching-Li; Lin, Feng-Huei

    2011-01-01

    Vitrectomy is a common procedure for treating ocular-related diseases. The surgery involves removing the vitreous humor from the center of the eye, and vitreous substitutes are needed to replace the vitreous humor after vitrectomy. In the present study, we developed a colorless, transparent and injectable hydrogel with appropriate refractive index as a vitreous substitute. The hydrogel is formed by oxidated hyaluronic acid (oxi-HA) cross-linked with adipic acid dihydrazide (ADH). Hyaluronic acid (HA) was oxidized by sodium periodate to create aldehyde functional groups, which could be cross-linked by ADH. The refractive index of this hydrogel ranged between 1.3420 and 1.3442, which is quite similar to human vitreous humor (1.3345). The degradation tests demonstrated that the hydrogel could maintain the gel matrix over 35 days, depending on the ADH concentration. In addition, the cytotoxicity was evaluated on retina pigmented epithelium (RPE) cells cultivated following the ISO standard (tests for in vitro cytotoxicity), and the hydrogel was found to be non-toxic. In a preliminary animal study, the oxi-HA/ADH hydrogel was injected into the vitreous cavity of rabbit eyes. The evaluations of slit-lamp observation, intraocular pressure, cornea thickness and histological examination showed no significant abnormal biological reactions for 3 weeks. This study suggests that the injectable oxi-HA/ADH hydrogel should be a potential vitreous substitute.

  1. Synthesis of C5-tetrazole derivatives of 2-amino-adipic acid displaying NMDA glutamate receptor antagonism.

    PubMed

    Lenda, Fatimazohra; Crouzin, Nadine; Cavalier, Mélanie; Guiramand, Janique; Lanté, Fabien; Barbanel, Gérard; Cohen-Solal, Catherine; Martinez, Jean; Guenoun, Farhate; Lamaty, Frédéric; Vignes, Michel

    2011-03-01

    Five derivatives of 2-amino-adipic acid bearing a tetrazole-substituted in C5 position were synthesized. These compounds displayed selective antagonism towards N-methyl-D: -aspartate (NMDA) receptors compared with AMPA receptors, and they were devoid of any neurotoxicity. Among these five analogues, one exhibited a higher affinity for synaptic NMDA responses than the other four. Therefore, C5 tetrazole-substituted of 2-amino-adipic acid represent an interesting series of new NMDA receptor antagonists. This approach may be considered as a new strategy to develop ligands specifically targeted to synaptic or extra-synaptic NMDA receptors.

  2. Influence of adipic acid on tensile and morphology properties of linear low density polyethylene/rambutan peels flour blends

    NASA Astrophysics Data System (ADS)

    Nadhirah, A. A.; Sam, S. T.; Noriman, N. Z.; Ragunathan, S.; Ismail, H.

    2015-07-01

    This study investigate about the tensile and morphological properties of degradable polymer produced from linear low density polyethylene/rambutan peel flour (LLDPE/RPF) blends and adipic acid (AA) was used as a compatibilizer by varying the rambutan peel flour (RPF) amount from 0-25wt%. The samples were subjected to tensile and morphological tests. AA compatibilized showed higher strength compared to uncompatibilized blends. The Young's modulus for LLDPE/RPF blends increased with increasing flour content. However, the addition of adipic acid had reduced the Young's Modulus.

  3. Engineering a Polyketide Synthase for In Vitro Production of Adipic Acid.

    PubMed

    Hagen, Andrew; Poust, Sean; Rond, Tristan de; Fortman, Jeffrey L; Katz, Leonard; Petzold, Christopher J; Keasling, Jay D

    2016-01-15

    Polyketides have enormous structural diversity, yet polyketide synthases (PKSs) have thus far been engineered to produce only drug candidates or derivatives thereof. Thousands of other molecules, including commodity and specialty chemicals, could be synthesized using PKSs if composing hybrid PKSs from well-characterized parts derived from natural PKSs was more efficient. Here, using modern mass spectrometry techniques as an essential part of the design-build-test cycle, we engineered a chimeric PKS to enable production one of the most widely used commodity chemicals, adipic acid. To accomplish this, we introduced heterologous reductive domains from various PKS clusters into the borrelidin PKS' first extension module, which we previously showed produces a 3-hydroxy-adipoyl intermediate when coincubated with the loading module and a succinyl-CoA starter unit. Acyl-ACP intermediate analysis revealed an unexpected bottleneck at the dehydration step, which was overcome by introduction of a carboxyacyl-processing dehydratase domain. Appending a thioesterase to the hybrid PKS enabled the production of free adipic acid. Using acyl-intermediate based techniques to "debug" PKSs as described here, it should one day be possible to engineer chimeric PKSs to produce a variety of existing commodity and specialty chemicals, as well as thousands of chemicals that are difficult to produce from petroleum feedstocks using traditional synthetic chemistry.

  4. Consecutive visible-light photoredox decarboxylative couplings of adipic acid active esters with alkynyl sulfones leading to cyclic compounds.

    PubMed

    Li, Jingjing; Tian, Hua; Jiang, Min; Yang, Haijun; Zhao, Yufen; Fu, Hua

    2016-07-07

    Novel and efficient consecutive photoredox decarboxylative couplings of adipic acid active esters (bis(1,3-dioxoisoindolin-2-yl)-substituted hexanedioates) with substituted 1-(2-arylethynylsulfonyl)benzenes have been developed under visible-light photocatalysis. The successive photoredox decarboxylative C-C bond formation at room temperature afforded the corresponding cyclic compounds in good yields with tolerance of some functional groups.

  5. Development of a solid-phase extraction method for simultaneous extraction of adipic acid, succinic acid and 1,4-butanediol formed during hydrolysis of poly(butylene adipate) and poly(butylene succinate).

    PubMed

    Lindström, Annika; Albertsson, Ann-Christine; Hakkarainen, Minna

    2004-01-02

    A solid-phase extraction (SPE) method was developed for the simultaneous extraction of dicarboxylic acids and diols formed during hydrolysis of poly(butylene succinate), PBS, and poly(butylene adipate), PBA. Four commercial non-polar SPE columns, three silica based: C8, C18, C18 (EC), and one resin based: ENV+, were tested for the extraction of succinic acid, adipic acid and 1,4-butanediol, the expected final hydrolysis products of PBS and PBA. ENV+ resin was chosen as a solid-phase, because it displayed the best extraction efficiency for 1,4-butanediol and succinic acid. Linear range for the extracted analytes was 1-500 ng/microl for adipic acid and 2-500 ng/microl for 1,4-butanediol and succinic acid. Detection and quantification limits for the analytes were between 1-2 and 2-7 ng/microl, respectively, and relative standard deviations were between 3 and 7%. Good repeatability and low detection limits made the developed SPE method and subsequent gas chromatography-mass spectrometry (GC-MS) analysis a sensitive tool for identification and quantification of hydrolysis products at early stages of degradation.

  6. Magnesium-mediated intramolecular reductive coupling: a stereoselective synthesis of C(2)-symmetric 3,4-bis-silyl-substituted adipic acid derivatives.

    PubMed

    Kundu, Pintu K; Ghosh, Sunil K

    2009-11-21

    Chiral C(2)-symmetric 3,4-bis-silyl-substituted adipic acid derivatives have been synthesised by a Mg/trimethylsilyl chloride-mediated intramolecular reductive coupling of symmetrical disiloxanes of beta-silylacrylic acid N-oxazolidinone derivatives. Efficient and short syntheses of enantiomerically pure enantiomers of 2,6-dioxabicyclo[3.3.0]octane-3,7-dione have been achieved from the bis-silylated adipic acid derivatives using Fleming-Tamao oxidation as the key step.

  7. Continuous-flow synthesis of adipic acid from cyclohexene using hydrogen peroxide in high-temperature explosive regimes.

    PubMed

    Damm, Markus; Gutmann, Bernhard; Kappe, C Oliver

    2013-06-01

    Safe only in a microreactor! The synthesis of adipic acid from cyclohexene by tungstic acid-catalyzed oxidation using hydrogen peroxide following the classical Noyori protocol can be accomplished in good yields with residence times as short as 20 min at 140 °C using a safe and scalable microreactor environment. Under these intensified conditions the use of a phase-transfer catalyst is not required.

  8. The adipic acid enhanced flue gas desulfurization process for industrial boilers. Volume 2. Technical assessment. Final report Feb 81-Feb 82

    SciTech Connect

    Behrens, G.P.; Hargrove, O.W. Jr

    1982-11-01

    The report gives results of an evaluation of an adipic acid enhanced limestone flue gas desulfurization (FGD) system on industrial boilers at Rickenbacker Air National Guard Base. The SO/sub 2/ removal efficiency with the adipic acid averaged 94.3% over a 30-day period. This represents a significant improvement in the performance of the system using only limestone. Economic calculations for an industrial boiler adipic acid enhanced limestone FGD system indicate a slight reduction in both capital and operating expenses relative to a limestone-only system designed for 90% SO2 control of 3.5% sulfur coal. The costs are competitive with those of the dual alkali system. The successful demonstration of the adipic acid enhanced limestone system increases the number of demonstrated technologies available to a potential user.

  9. Highly efficient one-step conversion of cyclohexane to adipic acid using single-site heterogeneous catalysts.

    PubMed

    Raja, Robert; Thomas, John Meurig; Xu, Mingcan; Harris, Kenneth D M; Greenhill-Hooper, Michael; Quill, Kieran

    2006-01-28

    A solid source of 'active' oxygen (acetylperoxyborate, APB), when dissolved in aqueous solution in the presence of a single-site microporous catalyst containing redox centres (Fe(III)AlPO-31, Mn(III)AlPO-5, Fe(III)AlPO-5), converts cyclohexane with high efficiency (ca. 88%) and exceptionally high selectivity (ca. 81%) to adipic acid at 383 K; this procedure is also effective in converting styrene to styrene oxide and -pinene and (+)-limonene to their corresponding epoxides.

  10. Effects of strong inter-hydrogen bond dynamical couplings in the polarized IR spectra of adipic acid crystals

    NASA Astrophysics Data System (ADS)

    Flakus, Henryk T.; Tyl, Aleksandra; Jablońska, Magdalena

    2009-10-01

    This paper presents the results of the re-investigation of polarized IR spectra of adipic acid and of its d2, d8 and d10 deuterium derivative crystals. The spectra were measured at 77 K by a transmission method using polarized light for two different crystalline faces. Theoretical analysis concerned linear dichroic effects and H/D isotopic effects observed in the spectra of the hydrogen and deuterium bonds in adipic acid crystals at the frequency ranges of the νO-H and the νO-D bands. The two-branch fine structure pattern of the νO-H and νO-D bands and the basic linear dichroic effects characterizing them were ascribed to the vibronic mechanism of vibrational dipole selection rule breaking for IR transitions in centrosymmetric hydrogen bond dimers. It was proved that for isotopically diluted crystalline samples of adipic acid, a non-random distribution of protons and deuterons occurs in the dimers (H/D isotopic " self-organization" effect). This effect results from the dynamical co-operative interactions involving the dimeric hydrogen bonds.

  11. Novel molecular anti-colorectalcancer conjugate:chlorambucil-adipic acid dihydrizide-glutamine.

    PubMed

    Tabasi, Maryam Akhavan; Amanlou, Massoud; Siadat, Seyed Davar; Nourmohammadi, Zahra; Omoomi, Farnoor Davachi; Ebrahimi, Seyed Esmaeil Sadat; Aghasadeghi, Mohammad Reza; Rahimi, Pooneh; Pourhosseini, Sahar; Mehravi, Bita; Ardestani, Mehdi Shafiee

    2013-11-01

    Cancer is one of the most fatal diseases in the world and it has been years that finding new drugs and chemotherapeutic techniques with lowest side effects become one of the most important challenging matters needs really hard efforts. Chlorambucil (CBL), an ancient direct-acting alkylating anticancer agent, is commonly used for initial treatment of some kinds of cancers but the use of CBL is often limited because of the unpleasant side effects due to its lack of specificity for targeting cancer cells. In this research we tried to increase the specificity of CBL by producing a novel conjugate by using glutamine amino acid (Glut). Based on previous studies, poly amines and nitrogen compounds noticeably are used by cancer cells increasingly; therefore we decided to increase the efficiency and specificity of CBL by designing and producing a novel anti cancer conjugate using glutamine amino acid as an uptake enhancer, CBL, and Adipic acid Dihydrazide (ADH) as a spacer and linker. The biological tests were carried out on HT29 colorectal cancer cell line to evaluate its anticancer properties. Biological tests like MTT assay, finding IC50, evaluating the induced mechanism of the death of our novel CBL-Glutamine conjugate on HT29 cells, testing abnormal toxicity of this conjugate on mice in comparison with CBL drug were careid out. We found that not only CBL-Glutamine conjugate preserved its anti cancer property with regard to CBL drug, but also it represent lower abnormal toxicity in mice. Apoptosis was detected as its mechanism of the death. Our present study provides a promising strategy for targeting cancer cells using amino acids nano-conjugate drugs. The future perspectives have also been highlighted in continuing similar and relative researches.

  12. Chiral transformation in protonated and deprotonated adipic acids through multistep internal proton transfer.

    PubMed

    Min, Seung Kyu; Park, Mina; Singh, N Jiten; Lee, Han Myoung; Lee, Eun Cheol; Kim, Kwang S; Lagutschenkov, Anita; Niedner-Schatteburg, Gereon

    2010-09-10

    Protonated and deprotonated adipic acids (PAA: HOOC-(CH(2))(4)--COOH(2) (+) and DAA: HOOC-(CH(2))(4)-COO(-)) have a charged hydrogen bond under the influence of steric constraint due to the molecular skeleton of a circular ring. Despite the similarity between PAA and DAA, it is surprising that the lowest energy structure of PAA is predicted to have (H(2)O...H...OH(2))(+) Zundel-like symmetric hydrogen bonding, whereas that of DAA has H(3)O(+) Eigen-like asymmetric hydrogen bonding. The energy profiles show that direct proton transfer between mirror image structures is unfavorable. Instead, the chiral transformation is possible by subsequent backbone twistings through stepwise proton transfer along multistep intermediate structures, which are Zundel-like ions for PAA and Eigen-like ions for DAA. This type of chiral transformation by multistep intramolecular proton transfers is unprecedented. Several prominent OH...O short hydrogen-bond stretching peaks are predicted in the range of 1000-1700 cm(-1) in the Car-Parrinello molecular dynamics (CPMD) simulations, which show distinctive signatures different from ordinary hydrogen-bond peaks. The O-H-O stretching peaks in the range of 1800-2700 cm(-1) become insignificant above around 150 K and are almost washed out at about 300 K.

  13. Superconducting properties of adipic-acid-doped bulk MgB2 superconductor

    NASA Astrophysics Data System (ADS)

    Vajpayee, Arpita; Awana, V. P. S.; Bhalla, G. L.; Bhobe, P. A.; Nigam, A. K.; Kishan, H.

    2009-01-01

    We report the effect of adipic acid (C6H10O4) doping on lattice parameters, microstructure, critical temperature (Tc), current density (Jc) and irreversibility field (Hirr) for an MgB2 superconductor. Actual carbon (C) substitution level for boron (B) is estimated to be from 0.40 at.% to 2.95 at.% for different doping levels. A reduction in Tc from 38.43 to 34.93 K and in lattice parameter a from 3.084(3) Å to 3.075(6) Å is observed for the 10 wt% C6H10O4 doped sample in comparison to pristine MgB2. This is an indication of C substitution at boron sites, with the C coming from the decomposition of C6H10O4 at the time of reaction. Interestingly the doped samples have resulted in significant enhancement of Jc and Hirr. All the doped samples exhibit the Jc value of the order of 104 A cm-2 at 5 K and 8 T, which is higher by an order of magnitude as compared to the undoped sample. This result indicates that C6H10O4 is a promising material for MgB2 for obtaining the excellent Jc values under higher magnetic fields.

  14. Control of the phytopathogen Botrytis cinerea using adipic acid monoethyl ester.

    PubMed

    Vicedo, Begonya; de la O Leyva, María; Flors, Víctor; Finiti, Ivan; Del Amo, Gemma; Walters, Dale; Real, Maria Dolores; García-Agustín, Pilar; González-Bosch, Carmen

    2006-01-01

    The in vitro and in vivo antifungal activity of adipic acid monoethyl ester (AAME) on the necrotrophic pathogen Botrytis cinerea has been studied. This chemical effectively controlled this important phytopathogen, inhibited spore germination and mycelium development at non-phytotoxic concentrations. The effectiveness of AAME treatment is concentration-dependent and influenced by pH. Spore germination in the presence of AAME is stopped at a very early stage, preventing germ tube development. In addition, cytological changes such as retraction of the conidial cytoplasm in the fungus are observed. AAME was also found to act on membrane integrity, affecting permeability without exhibiting lytic activity, as described previously for other antifungal compounds. Polyamine content in the mycelium of B. cinerea was also affected in response to AAME treatment, resulting in putrescine reduction and spermine accumulation similar to a number of antifungal agents. Microscopic observation of treated conidia after inoculation on tomato leaves suggested that inhibited spores are not able to attach to and penetrate the leaf. Finally, AAME completely suppressed the grey mould disease of tomato fruits under controlled inoculation conditions, providing evidence for its efficacy in a biological context and for the potential use of this chemical as an alternative fungicide treatment.

  15. Construction of two Cd(II) complexes by flexible adipic acid plus 2-((benzoimidazol-yl)methyl)-1H-tetrazole ligand

    NASA Astrophysics Data System (ADS)

    Duan, Wanlu; Zhang, Yuhong; Wang, Xiuxiu; Meng, Xiangru

    2015-10-01

    Two new complexes with the formulas [Cd(bimt)(adi)]n (1) and {[Cd(bimt)(adi)0.5Br]·H2O}n (2) were synthesized through reactions of 2-((benzoimidazol-yl)methyl)-1H-tetrazole (bimt) with Cd(II) salts in the presence of adipic acid (H2adi). Single crystal X-ray analysis reveals that complex 1 shows a 1D chain structure in which adipate ligand coordinates to Cd(II) ions with μ3-bridging mode. Complex 2 displays a 2D layer structure with 4-connected (44·62) topology in which adipate ligand coordinates to Cd(II) ions with μ2-bridging mode. These results reveal that the versatile coordination modes of adipate ligands play an important role in controlling the structures of the complexes. In addition, their IR spectra, element analyses, PXRD patterns and luminescent properties are investigated.

  16. Interactions of collagen molecules in the presence of N-hydroxysuccinimide activated adipic acid (NHS-AA) as a crosslinking agent.

    PubMed

    Zhang, Min; Wu, Kun; Li, Guoying

    2011-11-01

    The effect of crosslinking agent on pepsin-soluble bovine collagen solution was examined using N-hydroxysuccinimide activated adipic acid (NHS-AA) as a crosslinker. Electrophoretic patterns indicated that crosslinks formed when NHS-AA was added. A higher polarity level deduced from the changes in the fluorescence emission spectrum of pyrene in the crosslinked collagen solution indicated that the formation of well-ordered aggregates was suppressed. The random aggregation of collagens was also observed by atomic force microscopy (AFM). Furthermore, the association of collagens into fibrils was influenced by crosslinking. Self-assembly was suppressed at 37°C; however, as temperature was increased to 39°C, a small amount of NHS-AA leaded to an improvement in the ability of self-aggregation. Although more random structure was brought about by crosslinking, self-aggregation might still be promoted as temperature was increased, accompanying by the thermal stability improvement of fibrils.

  17. Metabolism of phytanic acid and 3-methyl-adipic acid excretion in patients with adult Refsum disease.

    PubMed

    Wierzbicki, Anthony S; Mayne, Phillip D; Lloyd, Matthew D; Burston, David; Mei, Guam; Sidey, Margaret C; Feher, Michael D; Gibberd, F Brian

    2003-08-01

    Adult Refsum disease (ARD) is associated with defective alpha-oxidation of phytanic acid (PA). omega-Oxidation of PA to 3-methyl-adipic acid (3-MAA) occurs although its clinical significance is unclear. In a 40 day study of a new ARD patient, where the plasma half-life of PA was 22.4 days, omega-oxidation accounted for 30% initially and later all PA excretion. Plasma and adipose tissue PA and 3-MAA excretion were measured in a cross-sectional study of 11 patients. The capacity of the omega-oxidation pathway was 6.9 (2.8-19.4) mg [20.4 (8.3-57.4) micromol] PA/day. 3-MAA excretion correlated with plasma PA levels (r = 0.61; P = 0.03) but not adipose tissue PA content. omega-Oxidation during a 56 h fast was studied in five patients. 3-MAA excretion increased by 208 +/- 58% in parallel with the 158 (125-603)% rise in plasma PA. Plasma PA doubled every 29 h, while 3-MAA excretion followed second-order kinetics. Acute sequelae of ARD were noted in three patients (60%) after fasting. The omega-oxidation pathway can metabolise PA ingested by patients with ARD, but this activity is dependent on plasma PA concentration. omega-Oxidation forms a functional reserve capacity that enables patients with ARD undergoing acute stress to cope with limited increases in plasma PA levels.

  18. Structure and spectroscopic studies of homo-and heterometallic complexes of adipic acid dihydrazide.

    PubMed

    Jeragh, Bakir; El-Asmy, Ahmed A

    2014-05-05

    A single crystal of adipic acid dihydrazide, ADH, has been analyzed. Its reaction with Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Ag(+), Pd(2+) and/or Pt(2+) gave homometallic and heterometallic complexes which are characterized by partial elemental analysis, spectra (MS, ESR, (1)H NMR, electronic; IR), thermal analysis and magnetic measurements. Some complexes: Zn(0.73)Cu(ADH)Cl4·H2O; Zn(0.71)Hg(0.36)(ADH)Cl4·H2O; Zn(0.65)Cd(0.46)(ADH)Cl4·½H2O; Zn(0.75)Co(0.41)(ADH-2H)Cl2·3H2O; Cd0.85Co0.43(ADH)Cl4·½EtOH were isolated having nonstiochiometric metal ratios. The ligand behaves as a neutral (bidentate or tetradentate) and/or binegative tetradentate. A square-pyramid, square-planar and tetrahedral structures were proposed for the homo Co(II), Cu(II) and Ni(II) complexes, respectively. A similar and different stereochemistry around each metal ion (tetrahedral+tetrahedral; tetrahedral+square-planar; tetrahedral+tetrahedral and/or tetrahedral+octahedral) was suggested for the heterometallic complexes. Some complexes were found highly stable with stability point >240 °C; the most stable is [HgNi(ADH-2H)Cl2]. The presence of diamagnetic atom (Zn, Cd or Hg) reduces the magnetic moments and gave anomalous moments. The degradation steps and the hydrated complexes are confirmed through the TGA study. The order of covalency of [Zn(0.73)Cu(ADH)Cl4]·H2O, [CdCu(ADH)Cl4]·H2O and [HgCu(ADH-2H)Cl2] matches with the size of the second metal (Zn complex>Cd complex>Hg complex). Some heterometallic complexes were found nonstoichiometric through the analysis of their metal content and supported by TGA.

  19. Structure and spectroscopic studies of homo-and heterometallic complexes of adipic acid dihydrazide

    NASA Astrophysics Data System (ADS)

    Jeragh, Bakir; El-Asmy, Ahmed A.

    A single crystal of adipic acid dihydrazide, ADH, has been analyzed. Its reaction with Co2+, Ni2+, Cu2+, Zn2+, Cd2+, Hg2+, Ag+, Pd2+ and/or Pt2+ gave homometallic and heterometallic complexes which are characterized by partial elemental analysis, spectra (MS, ESR, 1H NMR, electronic; IR), thermal analysis and magnetic measurements. Some complexes: Zn0.73Cu(ADH)Cl4·H2O; Zn0.71Hg0.36(ADH)Cl4·H2O; Zn0.65Cd0.46(ADH)Cl4·½H2O; Zn0.75Co0.41(ADH-2H)Cl2·3H2O; Cd0.85Co0.43(ADH)Cl4·½EtOH were isolated having nonstiochiometric metal ratios. The ligand behaves as a neutral (bidentate or tetradentate) and/or binegative tetradentate. A square-pyramid, square-planar and tetrahedral structures were proposed for the homo Co(II), Cu(II) and Ni(II) complexes, respectively. A similar and different stereochemistry around each metal ion (tetrahedral + tetrahedral; tetrahedral + square-planar; tetrahedral + tetrahedral and/or tetrahedral + octahedral) was suggested for the heterometallic complexes. Some complexes were found highly stable with stability point >240 °C; the most stable is [HgNi(ADH-2H)Cl2]. The presence of diamagnetic atom (Zn, Cd or Hg) reduces the magnetic moments and gave anomalous moments. The degradation steps and the hydrated complexes are confirmed through the TGA study. The order of covalency of [Zn0.73Cu(ADH)Cl4]·H2O, [CdCu(ADH)Cl4]·H2O and [HgCu(ADH-2H)Cl2] matches with the size of the second metal (Zn complex > Cd complex > Hg complex). Some heterometallic complexes were found nonstoichiometric through the analysis of their metal content and supported by TGA.

  20. The first contribution of capillary electrophoresis to the study of abiotic origins of homochirality: investigation of the enantioselective adsorption of 3-carboxy adipic acid on minerals.

    PubMed

    Castro-Puyana, María; Salgado, Antonio; Hazen, Robert M; Crego, Antonio L; Alegre, María Luisa Marina

    2008-04-01

    CE with UV detection was used for the first time to determine the enantioselective adsorption of the short-chain tricarboxylic acid, 3-carboxy adipic acid, on minerals as a mean of investigating plausible mechanisms for the origin of biochemical homochirality on Earth. The use of vancomycine as chiral selector in the separation buffer using the partial filling technique enabled the separation of the two enantiomers of this organic acid in about 12 min. Taking into account that this compound has a low absorption of the UV light, and in order to achieve the sensitivity needed to determine the enantiomeric excess of samples of 3-carboxy adipic acid adsorbed on minerals, we applied a strategy consisting of a field-amplified sample stacking together with the use of a bubble capillary and detection at low wavelength (192 nm). This combination enabled an LOD of about 10(-7) M and the determination of the enantiomeric excess of 3-carboxy adipic acid adsorbed on calcite and feldspar mineral samples at subnanomol levels of this acid. Results showed that an enantioselective adsorption of the enantiomers of 3-carboxy adipic acid on minerals took place.

  1. X-ray studies on crystalline complexes involving amino acids and peptides. XLII. Adipic acid complexes of L- and DL-arginine and supramolecular association in arginine-dicarboxylic acid complexes.

    PubMed

    Roy, Siddhartha; Singh, Desh Deepak; Vijayan, M

    2005-02-01

    The adipic acid complexes of DL-arginine and L-arginine are made up of zwitterionic, singularly positively charged arginium ions and doubly negatively charged adipate ions, with a 2:1 stoichiometry. One of the two crystallographically independent arginium ions in the L-arginine complex has a conformation hitherto unobserved in crystal structures containing the amino acid. In the present study the structural data on arginine complexes of saturated dicarboxylic acids with 0-5 C atoms separating the two carboxyl functions are given. In terms of molecular aggregation, formic and acetic acid complexes behave in a similar way to those involving fairly long carboxylic acids such as adipic acid. By and large, the supramolecular assembly in complexes involving dicarboxylic acids with 3 or more C atoms separating the carboxyl groups (glutaric, adipic and pimelic acids), and those involving formic and acetic acids, have common features. The aggregation patterns in complexes involving oxalic, malonic and maleic acids do not share striking features among themselves (except for the mode of hydrogen-bonded dimerization of arginium ions) or with those involving larger dicarboxylic acids. Complexes of succinic acid, the shortest linear dicarboxylic acid, share features with those involving shorter as well as longer dicarboxylic acids. The difference in the behaviour of long and short dicarboxylic acids and the ambiguous behaviour of succinic acid can be broadly related to their lengths.

  2. High-index proton-exchanged MgO:LiNbO3 optical waveguides using adipic acid

    NASA Astrophysics Data System (ADS)

    Pun, E. Y. B.; Loi, K. K.; Mak, C. F.; Chung, P. S.

    1993-03-01

    We report the fabrication and characterization of proton-exchanged optical waveguides in z-cut MgO:LiNbO3 using adipic acid as a new proton source. These waveguides exhibit propagation losses of less than 1 dB/cm, a linear-step index profile, and a surface index increase of 0.149 measured at 0.633 μm wavelength. This is the largest surface index change reported for proton-exchanged MgO:LiNbO3 waveguides. The diffusion parameters were characterized optically, and the diffusion constant D0 and the activation energy Q were found to be 5.40×1010 μm2/h and 103.27 kJ/mol, respectively. The diffusion rate is slower than that of the popular phosphoric acid.

  3. Effect of dietary adipic acid and corn dried distillers grains with solubles on laying hen performance and nitrogen loss from stored excreta with or without sodium bisulfate.

    PubMed

    Romero, C; Abdallh, M E; Powers, W; Angel, R; Applegate, T J

    2012-05-01

    Effects of dietary adipic acid (0 vs. 1%) and corn dried distillers grains with solubles (DDGS; 0 vs. 20%) were evaluated on hen performance and egg characteristics from 26 to 34 wk of age. Four isocaloric and isonitrogenous diets were randomly assigned to blocks of 6 consecutive cages (36 cages per diet; 2 hens per cage). On wk 2 and 7 of the experiment, excreta were collected by cage block, mixed, and equally split into 2 containers. Sodium bisulfate (SBS) was spread (8.8 kg/100 m(2)) on the top surface of half of the containers. All containers were stored uncovered for 14 d at room temperature. Excreta pH, DM, and N content were measured on d 0, 7, and 14 of storage. Feed intake (112 g/d per hen), egg production (96.1%), and egg specific gravity (1.079 g/g) were not affected by diet. On excreta collection day, a synergy (P = 0.014) between dietary adipic acid and DDGS was detected, as the lowest excreta pH was obtained with the diet including both adipic acid and DDGS. On d 7 of storage, excreta pH was still reduced by dietary adipic acid (P = 0.046) and DDGS (P < 0.001), but a week later, only dietary DDGS decreased excreta pH (8.91 vs. 9.21; P < 0.001). Whereas dietary adipic acid had no influence on excreta N loss, excreta from hens fed 20% DDGS lost 19.7% more N (P = 0.039) during storage than hens not eating DDGS. Surface amendment of excreta with SBS increased excreta DM content, with the effect being even more marked on d 14 of storage (increase of 6.7 percentage units; P < 0.001), consistently decreased excreta pH during storage (P < 0.001) and reduced N loss by 26.1% for the 14 d of storage period.

  4. Adipic acid-2,6-bis-(1H-benzimidazol-2-yl)pyridine-water (1/2/4).

    PubMed

    Lin, Songzhu; Jia, Ruokun; Gao, Feng; Zhou, Xiaoqing

    2012-12-01

    The asymmetric unit of the title hydrated co-crystal, 2C19H13N5·C6H10O4·4H2O, consists of one 2,6-bis-(1H-benzimidazol-2-yl)pyridine mol-ecule, half of an adipic acid mol-ecule (bis-ected by an inversion center) and two water solvates. In the crystal, N-H⋯O, O-H⋯O and O-H⋯N hydrogen bonds and π-π inter-actions [centroid-centroid distances = 3.769 (2) and 3.731 (2) Å] form a three-dimensional supra-molecular structure.

  5. Dissociative Ionization Mechanism and Appearance Energies in Adipic Acid Revealed by Imaging Photoelectron Photoion Coincidence, Selective Deuteration, and Calculations.

    PubMed

    Heringa, Maarten F; Slowik, Jay G; Prévôt, André S H; Baltensperger, Urs; Hemberger, Patrick; Bodi, Andras

    2016-05-26

    Adipic acid, a model compound for oxygenated organic aerosol, has been studied at the VUV beamline of the Swiss Light Source. Internal energy selected cations were prepared by threshold photoionization using vacuum ultraviolet synchrotron radiation and imaging photoelectron photoion coincidence spectroscopy (iPEPICO). The threshold photoelectron spectrum yields a vertical ionization energy (IE) of 10.5 eV, significantly above the calculated adiabatic IE of 8.6 eV. The cationic minimum is accessible after vertical ionization by H-transfer from one of the γ-carbons to a carbonyl oxygen and is sufficiently energetic to decay by water loss at the ionization onset. The slope of the breakdown curves, quantum chemical calculations, and selective deuteration of the carboxylic hydrogens establish the dissociative photoionization mechanism. After ionization, one γ-methylene hydrogen and the two carboxylic hydrogens are randomized prior to H2O loss. On the basis of the deuteration degree in the H2O + CO-loss product at higher energies, a direct water-loss channel without complete randomization also exists. The breakdown diagram and center of gravity of the H2O + CO-loss peak were modeled to obtain 0 K appearance energies of 10.77, 10.32, and 11.53 eV for H2O + CO loss, CH2COOH loss, and H2O + CH2COOH loss from adipic acid. These agree well with the CBS-QB3 calculated values of 10.68, 10.45, and 11.57 eV, respectively, which shows that threshold photoionization can yield energetics data as long as the dissociation is statistical, even when the parent ion cannot be observed. The results can be used as a starting point for a deeper understanding of the ionization and low-energy fragmentation of organic aerosol components.

  6. Adipic acid dihydrazide treated partially oxidized alginate beads for sustained oral delivery of flurbiprofen.

    PubMed

    Maiti, Sabyasachi; Singha, Kamalika; Ray, Somasree; Dey, Paramita; Sa, Biswanath

    2009-01-01

    In this study, periodate oxidation of sodium alginate was controlled such that the oxidized alginate could form isolatable beads with Ca(+2) ions. The beads of oxidized alginate having a degree of oxidation 1 mol%, entrapped 89% flurbiprofen and released almost all of its content within 1.5 h in pH 7.2 phosphate buffer solution. The beads were covalently crosslinked with adipic dihydrazide (ADH) in addition to ionic crosslinks and were characterized. Scanning electron microscopy revealed that the beads were spherical having smooth surfaces. The drug entrapment efficiency decreased (90-86%) with increasing concentration of ADH (2-6% w/v) in the gelation medium. However, the beads prolonged the drug release in alkaline dissolution medium up to 8 h depending upon the concentration of ADH. The beads prepared with 2% ADH swelled more rapidly and led to faster drug release in either pH 1.2 HCl solution or pH 7.2 phosphate buffer solution. The swelling tendencies were reduced and the drug release became slower with higher concentrations in either fluid. The drug diffusion from the beads followed super case II transport mechanism. FTIR spectroscopy indicated stable nature of flurbiprofen in the beads and therefore had potential as sustained oral delivery system for the drug.

  7. Hybrid porous tin(IV) phosphonate: an efficient catalyst for adipic acid synthesis and a very good adsorbent for CO2 uptake.

    PubMed

    Dutta, Arghya; Pramanik, Malay; Patra, Astam K; Nandi, Mahasweta; Uyama, Hiroshi; Bhaumik, Asim

    2012-07-07

    A new porous organic-inorganic hybrid tin phosphonate material has been synthesized hydrothermally, which shows a Brunauer-Emmett-Teller surface area of 723 m(2) g(-1) and it adsorbs 4.8 mmol g(-1) CO(2) at 273 K and 5 bar pressure. The material also shows remarkable catalytic activity in one-pot liquid phase oxidation of cyclohexanone to adipic acid under eco-friendly conditions.

  8. Structure and properties of Al-MIL-53-ADP, a breathing MOF based on the aliphatic linker molecule adipic acid.

    PubMed

    Reinsch, Helge; Pillai, Renjith S; Siegel, Renée; Senker, Jürgen; Lieb, Alexandra; Maurin, Guillaume; Stock, Norbert

    2016-03-14

    The new aluminium based metal-organic framework [Al(OH)(O2C-C4H8-CO2)]·H2O denoted as Al-MIL-53-ADP-lp (lp stands for large pore) was synthesised under solvothermal conditions. This solid is an analogue of the archetypical aluminium terephthalate Al-MIL-53 based on the aliphatic single-chain linker molecule adipic acid (H2ADP, hexanedioic acid). In contrast to its aromatic counterparts, Al-MIL-53-ADP exhibits a structural breathing behaviour solely upon dehydration/rehydration. The crystal structure of the anhydrous compound denoted as Al-MIL-53-ADP-np (np stands for narrow pore) was determined by a combination of forcefield-based computations and Rietveld refinement of the powder X-ray diffraction data while the structure of the hydrated form Al-MIL-53-ADP-lp was derived computationally by a combination of force field based methods and Density Functional Theory calculations. Both structures were further supported by (1)H, (13)C and (27)Al high-resolution NMR MAS 1D data coupled again with simulations. Al-MIL-53-ADP was further characterised by means of vibrational spectroscopy, elemental analysis, thermogravimetry and water vapour sorption.

  9. Growth and characterization of a single crystal of Urea Adipic acid (UAA)--a third order nonlinear optical material.

    PubMed

    Shanthi, A; Krishnan, C; Selvarajan, P

    2014-03-25

    An organic single crystal of Urea Adipic acid (UAA) was successfully grown in methanol solvent by slow solvent evaporation technique at room temperature (30 °C). The structure of grown crystal was elucidated from the X-ray diffraction study and it belongs to monoclinic system with centrosymmetric space group P21/c. The optical transmission spectrum of UAA has been recorded and its theoretical calculations were carried out to determine the linear optical constants such as linear absorption coefficient, extinction coefficient, refractive index and reflectance etc. The third-order nonlinearities of UAA crystal have been investigated by Z-scan method. The values of nonlinear refractive index (n2), the absorption coefficient (β) and third-order nonlinear susceptibility (χ((3))) are found to be the order of 0.96×10(-10) cm(2)/W, 1.248×10(-4) cm/W and 6.44×10(-8) esu respectively. Fourier Transform Infra Red and Raman spectroscopy studies reveal the intermolecular interactions present in the UAA sample. The dielectric and mechanical measurements of the title compound are also reported.

  10. Growth and characterization of a single crystal of Urea Adipic acid (UAA) - A third order nonlinear optical material

    NASA Astrophysics Data System (ADS)

    Shanthi, A.; Krishnan, C.; Selvarajan, P.

    2014-03-01

    An organic single crystal of Urea Adipic acid (UAA) was successfully grown in methanol solvent by slow solvent evaporation technique at room temperature (30 °C). The structure of grown crystal was elucidated from the X-ray diffraction study and it belongs to monoclinic system with centrosymmetric space group P21/c. The optical transmission spectrum of UAA has been recorded and its theoretical calculations were carried out to determine the linear optical constants such as linear absorption coefficient, extinction coefficient, refractive index and reflectance etc. The third-order nonlinearities of UAA crystal have been investigated by Z-scan method. The values of nonlinear refractive index (n2), the absorption coefficient (β) and third-order nonlinear susceptibility (χ(3)) are found to be the order of 0.96 × 10-10 cm2/W, 1.248 × 10-4 cm/W and 6.44 × 10-8 esu respectively. Fourier Transform Infra Red and Raman spectroscopy studies reveal the intermolecular interactions present in the UAA sample. The dielectric and mechanical measurements of the title compound are also reported.

  11. Synthesis of orthogonally protected (2S)-2-amino-adipic acid (α-AAA) and (2S,4R)-2-amino-4-hydroxyadipic acid (Ahad).

    PubMed

    Yadav, Saroj; Taylor, Carol M

    2013-06-07

    (2S,4R)-2-amino-4-hydroxyadipic acid (Ahad) building block 45 was synthesized in 11 steps and 6.5% overall yield from commercially available materials. Key steps in stereocontrol were an asymmetric conjugate addition employing a proline-based catalyst and a syn-selective intramolecular-conjugate addition of an oxygen nucleophile to an α,β-unsaturated ester. To enable incorporation of α-amino-adipic acid (α-AAA) and Ahad into peptides, a truly orthogonal protecting group scheme was developed, encompassing an allyloxycarbonyl (Alloc) carbamate for Nα, a tert-butyl ester for the δ-COOH, an acetol ester for the α-COOH, and a tert-butyldimethylsilyl ether for the γ-hydroxy group of Ahad.

  12. Solid-state characterization of novel active pharmaceutical ingredients: cocrystal of a salbutamol hemiadipate salt with adipic acid (2:1:1) and salbutamol hemisuccinate salt.

    PubMed

    Paluch, Krzysztof J; Tajber, Lidia; Elcoate, Curtis J; Corrigan, Owen I; Lawrence, Simon E; Healy, Anne Marie

    2011-08-01

    The production of salt or cocrystalline forms is a common approach to alter the physicochemical properties of pharmaceutical compounds. The goal of this work was to evaluate the impact of anion choice (succinate, adipate, and sulfate) on the physicochemical characteristics of salbutamol forms. Novel crystals of salbutamol were produced by solvent evaporation: a cocrystal of salbutamol hemiadipate with adipic acid (salbutamol adipate, SA), salbutamol hemisuccinate tetramethanolate (SSU.MeOH), and its desolvated form (SSU). The crystalline materials obtained were characterized using thermal, X-ray, nuclear magnetic resonance, Fourier transform infrared spectroscopy, dynamic vapor sorption (DVS), and elemental analysis. The crystal forms of SA and SSU.MeOH were determined to be triclinic, (Pī), and monoclinic, (P2(1) /n), respectively. DVS analysis confirmed that SSU and SA do not undergo hydration under increased relative humidity. Both thermal and elemental analyses confirmed the stoichiometry of the salt forms. The aqueous solubilities of SA and SSU were measured to be 82 ± 2 mg/mL (pH 4.5 ± 0.1) and 334 ± 13 mg/mL (pH 6.6 ± 0.1), respectively. Measured values corresponded well with the calculated pH solubility profiles. The intrinsic dissolution rate of cocrystallized SA was approximately four times lower than that of SSU, suggesting its use as an alternative to more rapidly dissolving salbutamol sulfate.

  13. Determination of polyadipates migrating from lid gaskets of glass jars. Hydrolysis to adipic acid and measurement by LC-MS/MS.

    PubMed

    Driffield, M; Bradley, E L; Harmer, N; Castle, L; Klump, S; Mottier, P

    2010-10-01

    Polyadipate plasticizers can be present in the polyvinylchloride (PVC) gaskets used to seal the lids of glass jars. As the gaskets can come into direct contact with the foodstuffs inside the jar, the potential exists for polyadipate migration into the food. The procedure and performance characteristics of a test method for the analysis of polyadipates in food simulants (3% aqueous acetic acid and 10% aqueous ethanol) and the volatile test media used in substitute fat tests (isooctane and 95% aqueous ethanol) are described. The PVC gaskets were exposed to the food simulants or their substitutes under standard test conditions. Studies were initially carried out using direct measurement of the polyadipate oligomers by liquid chromatography with time-of-flight mass spectrometric detection (LC-TOF-MS) but this was not practical due to the number of peaks detected. Instead, the migrating polyadipates were hydrolysed to adipic acid and measured by liquid chromatography with tandem mass spectrometric detection (LC-MS/MS). The amount of polyadipate that this measurement of adipic acid represents was then calculated. Method performance was assessed by analysis of gaskets from two types of jar lids by single-laboratory validation. Linearity, sensitivity, repeatability, intermediate reproducibility and recovery were determined to be suitable for checking compliance with the 30 mg/kg specific migration limits for polyesters of 1,2-propane diol and/or 1,3- and/or 1,4-butanediol and/or polypropylene-glycol with adipic acid, which may be end-capped with acetic acid or fatty acids C(12)-C(18) or n-octanol and/or n-decanol. The method was found to be much quicker than previous methods involving extraction, clean-up, hydrolysis, esterification, derivatisation and GC measurement, consequently saving time and money.

  14. Health Hazard Evaluation Report HETA 83-166-1594, Witco Chemical Corporation, Perth Amboy, New Jersey. [Ethylene oxide, glycols, and adipic acid

    SciTech Connect

    Cummings, C.E.; Roseman, J.

    1985-05-01

    Area and personel air samples were analyzed for ethylene oxide, glycols, and adipic-acid at the Witco Chemical Corporation, Perth Amboy, New Jersey from November to December, 1983 and May, 1984. The evaluation was requested by the union to investigate possible health effects due to polychlorinated biphenyls (PCBs), glycols, and ethylene oxide. The evaluation was assigned to the New Jersey State Department of Health. The authors conclude that health hazards due to ethylene oxide and airborne fatty acid exposures exist. Recommendations include improving ventilation and work practices and implementing an OSHA approved respirator program.

  15. Novel electrospun nanofibrous matrices prepared from poly(lactic acid)/poly(butylene adipate) blends for controlled release formulations of an anti-rheumatoid agent.

    PubMed

    Siafaka, Panoraia I; Barmbalexis, Panagiotis; Bikiaris, Dimitrios N

    2016-06-10

    In the present work, a series of novel formulations consisting of poly(lactic acid)/poly(butylene adipate) (PLA/PBAd) electrospun blends was examined as controlled release matrices for Leflunomide's active metabolite, Teriflunomide (TFL). The mixtures were prepared using different ratios of PLA and PBAd in order to produce nanofibrous matrices with different characteristics. Miscibility studies of the blended polymeric fibers were performed through differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). Hydrolytic degradation in the prepared fibers was evaluated at 37°C using a phosphate buffered saline solution. Different concentrations of (TFL) (5, 10, 15wt.%) were incorporated into nanofibers for examining the drug release behavior in simulated body fluids (SBF), at 37°C. The drug-loaded nanofibrous formulations were further characterized by Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy, DSC and XRD. Gel permeation chromatography (GPC) analysis was used to evaluate the mechanism of TFL release. Artificial neural networks (ANN) and multi-linear-regression (MLR) models were used to evaluate the effect of % content of PBAd (X1) and TFL (X2) on an initial burst effect and a dissolution behavior. It was found that PLA/PBAd nanofibers have different diameters depending on the ratio of used polyesters and added drug. TFL was incorporated in an amorphous form inside the polymeric nanofibers. In vitro release studies reveal that a drug release behavior is correlated with the size of the nanofibers, drug loading and matrix degradation after a specific time. ANN dissolution modeling showed increased correlation efficacy compared to MLR.

  16. Mesoporous core–shell Fenton nanocatalyst: a mild, operationally simple approach to the synthesis of adipic acid.

    PubMed

    Patra, Astam K; Dutta, Arghya; Bhaumik, Asim

    2013-09-09

    Mesoporous nanoparticles composed of γ-Al2O3 cores and α-Fe2O3 shells were synthesized in aqueous medium. The surface charge of γ-Al2O3 helps to form the core–shell nanocrystals. The core–shell structure and formation mechanism have been investigated by wide-angle XRD, energy-dispersive X-ray spectroscopy, and elemental mapping by ultrahigh-resolution (UHR) TEM and X-ray photoelectron spectroscopy. The N2 adsorption–desorption isotherm of this core–shell materials, which is of type IV, is characteristic of a mesoporous material having a BET surface area of 385 m2 g(−1) and an average pore size of about 3.2 nm. The SEM images revealed that the mesoporosity in this core–shell material is due to self-aggregation of tiny spherical nanocrystals with sizes of about 15–20 nm. Diffuse-reflectance UV/Vis spectra, elemental mapping by UHRTEM, and wide-angle XRD patterns indicate that the materials are composed of aluminum oxide cores and iron oxide shells. These Al2O3@Fe2O3 core–shell nanoparticles act as a heterogeneous Fenton nanocatalyst in the presence of hydrogen peroxide, and show high catalytic efficiency for the one-pot conversion of cyclohexanone to adipic acid in water. The heterogeneous nature of the catalyst was confirmed by a hot filtration test and analysis of the reaction mixture by atomic absorption spectroscopy. The kinetics of the reaction was monitored by gas chromatography and 1H NMR spectroscopy. The new core–shell catalyst remained in a separate solid phase, which could easily be removed from the reaction mixture by simple filtration and the catalyst reused efficiently.

  17. Experimental and theoretical charge density distribution in a host-guest system: synthetic terephthaloyl receptor complexed to adipic acid.

    PubMed

    Nguyen, Thanh Ha; Howard, Sian T; Hanrahan, Jane R; Groundwater, Paul W; Platts, James A; Hibbs, David E

    2012-06-14

    The experimental charge density distributions in a host-guest complex have been determined. The host, 1,4-bis[[(6-methylpyrid-2-yl)amino]carbonyl]benzene (1) and guest, adipic acid (2). The molecular geometries of 1 and 2 are controlled by the presence in the complex of intermolecular hydrogen bonding interactions and the presence in the host 1 of intramolecular hydrogen bonding motifs. This system therefore serves as an excellent model for studying noncovalent interactions and their effects on structure and electron density, and the transferability of electron distribution properties between closely related molecules. For the complex, high resolution X-ray diffraction data created the basis for a charge density refinement using a pseudoatomic multipolar expansion (Hansen-Coppens formalism) against extensive low-temperature (T = 100 K) single-crystal X-ray diffraction data and compared with a selection of theoretical DFT calculations on the same complex. The molecules crystallize in the noncentrosymmetric space group P2(1)2(1)2(1) with two independent molecules in the asymmetric unit. A topological analysis of the resulting density distribution using the atoms in molecules methodology is presented along with multipole populations, showing that the host and guest structures are relatively unaltered by the geometry changes on complexation. Three separate refinement protocols were adopted to determine the effects of the inclusion of calculated hydrogen atom anisotropic displacement parameters on hydrogen bond strengths. For the isotropic model, the total hydrogen bond energy differs from the DFT calculated value by ca. 70 kJ mol(-1), whereas the inclusion of higher multipole expansion levels on anisotropic hydrogen atoms this difference is reduced to ca. 20 kJ mol(-l), highlighting the usefulness of this protocol when describing H-bond energetics.

  18. Adipic acid-2,4-diamino-6-(4-meth-oxy-phen-yl)-1,3,5-triazine (1/2).

    PubMed

    Thanigaimani, Kaliyaperumal; Razak, Ibrahim Abdul; Arshad, Suhana; Jagatheesan, Rathinavel; Santhanaraj, Kulandaisamy Joseph

    2012-10-01

    The asymmetric unit of the title compound, 2C(10)H(11)N(5)O·C(6)H(10)O(4), consists of a 2,4-diamino-6-(4-meth-oxy-phen-yl)-1,3,5-triazine mol-ecule and one-half mol-ecule of adipic acid which lies about an inversion center. The triazine ring makes a dihedral angle of 12.89 (4)° with the adjacent benzene ring. In the crystal, the components are linked by N-H⋯O and O-H⋯N hydrogen bonds, thus generating a centrosymmetric 2 + 1 unit of triazine and adipic acid mol-ecules with R(2) (2)(8) motifs. The triazine mol-ecules are connected to each other by N-H⋯N hydrogen bonds, forming an R(2) (2)(8) motif and a supra-molecular ribbon along the c axis. The 2 + 1 units and the supra-molecular ribbons are further inter-linked by weak N-H⋯O, C-H⋯O and C-H⋯π inter-actions, resulting in a three-dimensional network.

  19. Polymer blends of polylactic acid (PLA) and polybutylene succinate-adipate

    NASA Astrophysics Data System (ADS)

    Ma, Wenguang

    A series of blends consisting of polylactic acid (PLA) and aliphatic succinate polyester (BionolleRTM #3000) had been prepared and investigated. The results of mechanical property investigations showed that using 20 wt% Bionolle#3000 can significantly increase the toughness of PLA. BionolleRTM #3000 also reduces the physical aging rate of PLA so blends remain tough longer. Conversely, the stiffness of BionolleRTM #3000 can be significantly increased by blending in PLA. DMA and DSC results show that PLA/BionolleRTM 3000 blends are not thermodynamically miscible, but are compatible blends. Studies have also been performed to determine the amount and rate of aerobic biodegradation of PLA/aliphatic succinate polyester blends in biologically active composting, enzymatic, and soil environments. The changes in molecular weight, molecular structure and thermal properties in the composting environment were also studied by GPC, NMR and DSC analyses. The research results showed BionolleRTM #3000 had a high degradation rate, while PLA had a low degradation rate. PLA/BionolleRTM #3000 blends had moderate degradation rates that increased with BionolleRTM #3000 content. The melt flow behavior of PLA/BionolleRTM #3000 blends has been studied by capillary rheometry. The relationship of the blends' viscosity with their composition, shear stress, shear rate, and temperature has been investigated. Power law index and activation energy of PLA, BionolleRTM #3000 and their blends have been calculated. The experimental and theoretical data can let us understand the processability of PLA/BionolleRTM #3000 blends. A scanning electron microscope (SEM) was used to investigate the morphological structure of the PLA/BionolleRTM #3000 blends. Micrographs of the samples made from different methods (blown film, extrudate and compression molding sheet) were taken; their differences in morphology were compared. For comparison, the micrographs of blend PLA/BionolleRTM #6000 was also studied. The

  20. Substrate specificity of 2-hydroxyglutaryl-CoA dehydratase from Clostridium symbiosum: toward a bio-based production of adipic acid.

    PubMed

    Parthasarathy, Anutthaman; Pierik, Antonio J; Kahnt, Jörg; Zelder, Oskar; Buckel, Wolfgang

    2011-05-03

    Expression of six genes from two glutamate fermenting clostridia converted Escherichia coli into a producer of glutaconate from 2-oxoglutarate of the general metabolism (Djurdjevic, I. et al. 2010, Appl. Environ. Microbiol.77, 320-322). The present work examines whether this pathway can also be used to reduce 2-oxoadipate to (R)-2-hydroxyadipic acid and dehydrate its CoA thioester to 2-hexenedioic acid, an unsaturated precursor of the biotechnologically valuable adipic acid (hexanedioic acid). 2-Hydroxyglutaryl-CoA dehydratase from Clostridium symbiosum, the key enzyme of this pathway and a potential radical enzyme, catalyzes the reversible dehydration of (R)-2-hydroxyglutaryl-CoA to (E)-glutaconyl-CoA. Using a spectrophotometric assay and mass spectrometry, it was found that (R)-2-hydroxyadipoyl-CoA, oxalocrotonyl-CoA, muconyl-CoA, and butynedioyl-CoA, but not 3-methylglutaconyl-CoA, served as alternative substrates. Hydration of butynedioyl-CoA most likely led to 2-oxosuccinyl-CoA, which spontaneously hydrolyzed to oxaloacetate and CoASH. The dehydratase is not specific for the CoA-moiety because (R)-2-hydroxyglutaryl-thioesters of N-acetylcysteamine and pantetheine served as almost equal substrates. Whereas the related 2-hydroxyisocaproyl-CoA dehydratase generated the stable and inhibitory 2,4-pentadienoyl-CoA radical, the analogous allylic ketyl radical could not be detected with muconyl-CoA and 2-hydroxyglutaryl-CoA dehydratase. With the exception of (R)-2-hydroxyglutaryl-CoA, all mono-CoA-thioesters of dicarboxylates used in this study were synthesized with glutaconate CoA-transferase from Acidaminococcus fermentans. The now possible conversion of (R)-2-hydroxyadipate via (R)-2-hydroxyadipoyl-CoA and 2-hexenedioyl-CoA to 2-hexenedioate paves the road for a bio-based production of adipic acid.

  1. Three-dimensional hydrogen-bonded structures in the hydrated proton-transfer salts of isonipecotamide with the dicarboxylic oxalic and adipic acid homologues.

    PubMed

    Smith, Graham; Wermuth, Urs D

    2013-10-01

    The structures of the 1:1 hydrated proton-transfer compounds of isonipecotamide (piperidine-4-carboxamide) with oxalic acid, 4-carbamoylpiperidinium hydrogen oxalate dihydrate, C6H13N2O(+)·C2HO4(-)·2H2O, (I), and with adipic acid, bis(4-carbamoylpiperidinium) adipate dihydrate, 2C6H13N2O(+)·C6H8O4(2-)·2H2O, (II), are three-dimensional hydrogen-bonded constructs involving several different types of enlarged water-bridged cyclic associations. In the structure of (I), the oxalate monoanions give head-to-tail carboxylic acid O-H···O(carboxyl) hydrogen-bonding interactions, forming C(5) chain substructures which extend along a. The isonipecotamide cations also give parallel chain substructures through amide N-H···O hydrogen bonds, the chains being linked across b and down c by alternating water bridges involving both carboxyl and amide O-atom acceptors and amide and piperidinium N-H···O(carboxyl) hydrogen bonds, generating cyclic R4(3)(10) and R3(2)(11) motifs. In the structure of (II), the asymmetric unit comprises a piperidinium cation, half an adipate dianion, which lies across a crystallographic inversion centre, and a solvent water molecule. In the crystal structure, the two inversion-related cations are interlinked through the two water molecules, which act as acceptors in dual amide N-H···O(water) hydrogen bonds, to give a cyclic R4(2)(8) association which is conjoined with an R4(4)(12) motif. Further N-H···O(water), water O-H···O(amide) and piperidinium N-H···O(carboxyl) hydrogen bonds give the overall three-dimensional structure. The structures reported here further demonstrate the utility of the isonipecotamide cation as a synthon for the generation of stable hydrogen-bonded structures. The presence of solvent water molecules in these structures is largely responsible for the non-occurrence of the common hydrogen-bonded amide-amide dimer, promoting instead various expanded cyclic hydrogen-bonding motifs.

  2. The mechanics of hyaluronic acid/adipic acid dihydrazide hydrogel: towards developing a vessel for delivery of preadipocytes to native tissues.

    PubMed

    Shoham, Naama; Sasson, Aviad Levi; Lin, Feng-Huei; Benayahu, Dafna; Haj-Ali, Rami; Gefen, Amit

    2013-12-01

    Promising treatment approaches in repairing tissue defects include implementation of regenerative medicine strategies, particularly delivery of preadipocytes to sites where adipose tissue damage needs to be repaired or where fat needs to be generated. In this study, we suggest that the injectable hyaluronic acid/adipic acid dihydrazide (HA/ADH) hydrogel may be an adipose-tissue-like material in terms of biological compatibility as well as mechanical behavior. First, we show that the hydrogel enables and supports growth, proliferation and differentiation of 3T3-L1 preadipocytes. Second, given that adipose tissue is a weight-bearing biological structure, we investigate the large deformation mechanical behavior of the hydrogel with and without embedded preadipocytes, by performing confined and unconfined compression tests and then calibrating a strain energy density (SED) function to the results. Four test groups were examined: (1) Hydrogel specimens right after the preparation without cells, (2) and (3) 3-days-cultured hydrogel specimens with and without cells, respectively, and (4) 6-days-cultured hydrogel specimens with cells. A one-term Ogden SED was found to adequately describe the hyperelastic behavior of the hydrogel specimens in all experimental groups. Importantly, we found that the mechanical properties of the hydrogel, when subjected to compression, are in good agreement with those of native adipose tissue, with the better fit occurring 3-6 days after preparation of the hydrogel. Third, computational finite element studies of the mechanical (stress-strain) behavior of the HA/ADH hydrogel when containing mature adipocytes indicated that the stiffnesses of the constructs were mildly affected by the presence of the adipocytes. Hence, we conclude that injectable HA/ADH hydrogel may serve as a vessel for protecting preadipocytes during, and at a short-term after delivery to native tissues, e.g. in research towards regenerative medicine in tissue reconstructions.

  3. The Penicillium chrysogenum aclA gene encodes a broad-substrate-specificity acyl-coenzyme A ligase involved in activation of adipic acid, a side-chain precursor for cephem antibiotics.

    PubMed

    Koetsier, Martijn J; Gombert, Andreas K; Fekken, Susan; Bovenberg, Roel A L; van den Berg, Marco A; Kiel, Jan A K W; Jekel, Peter A; Janssen, Dick B; Pronk, Jack T; van der Klei, Ida J; Daran, Jean-Marc

    2010-01-01

    Activation of the cephalosporin side-chain precursor to the corresponding CoA-thioester is an essential step for its incorporation into the beta-lactam backbone. To identify an acyl-CoA ligase involved in activation of adipate, we searched in the genome database of Penicillium chrysogenum for putative structural genes encoding acyl-CoA ligases. Chemostat-based transcriptome analysis was used to identify the one presenting the highest expression level when cells were grown in the presence of adipate. Deletion of the gene renamed aclA, led to a 32% decreased specific rate of adipate consumption and a threefold reduction of adipoyl-6-aminopenicillanic acid levels, but did not affect penicillin V production. After overexpression in Escherichia coli, the purified protein was shown to have a broad substrate range including adipate. Finally, protein-fusion with cyan-fluorescent protein showed co-localization with microbody-borne acyl-transferase. Identification and functional characterization of aclA may aid in developing future metabolic engineering strategies for improving the production of different cephalosporins.

  4. Evolution of insoluble eutectic Si particles in anodic oxidation films during adipic-sulfuric acid anodizing processes of ZL114A aluminum alloys

    NASA Astrophysics Data System (ADS)

    Hua, Lei; Liu, Jian-hua; Li, Song-mei; Yu, Mei; Wang, Lei; Cui, Yong-xin

    2015-03-01

    The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114A aluminum alloy substrates were investigated by optical microscopy (OM) and scanning electron microscopy (SEM). The anodic oxidation was performed at 25°C and a constant voltage of 15 V in a solution containing 50 g/L sulfuric acid and 10 g/L adipic acid. The thickness of the formed anodic oxidation film was approximately 7.13 μm. The interpore distance and the diameters of the major pores in the porous layer of the film were within the approximate ranges of 10-20 nm and 5-10 nm, respectively. Insoluble eutectic Si particles strongly influenced the morphology of the anodic oxidation films. The anodic oxidation films exhibited minimal defects and a uniform thickness on the ZL114A substrates; in contrast, when the front of the oxide oxidation films encountered eutectic Si particles, defects such as pits and non-uniform thickness were observed, and pits were observed in the films.

  5. Supra-molecular architecture in a co-crystal of the N(7)-H tautomeric form of N (6)-benzoyl-adenine with adipic acid (1/0.5).

    PubMed

    Swinton Darious, Robert; Thomas Muthiah, Packianathan; Perdih, Franc

    2016-06-01

    The asymmetric unit of the title co-crystal, C12H9N5O·0.5C6H10O4, consists of one mol-ecule of N (6)-benzoyl-adenine (BA) and one half-mol-ecule of adipic acid (AA), the other half being generated by inversion symmetry. The dihedral angle between the adenine and phenyl ring planes is 26.71 (7)°. The N (6)-benzoyl-adenine mol-ecule crystallizes in the N(7)-H tautomeric form with three non-protonated N atoms. This tautomeric form is stabilized by intra-molecular N-H⋯O hydrogen bonding between the carbonyl (C=O) group and the N(7)-H hydrogen atom on the Hoogsteen face of the purine ring, forming an S(7) ring motif. The two carboxyl groups of adipic acid inter-act with the Watson-Crick face of the BA mol-ecules through O-H⋯N and N-H⋯O hydrogen bonds, generating an R 2 (2)(8) ring motif. The latter units are linked by N-H⋯N hydrogen bonds, forming layers parallel to (10-5). A weak C-H⋯O hydrogen bond is also present, linking adipic acid mol-ecules in neighbouring layers, enclosing R (2) 2(10) ring motifs and forming a three-dimensional structure. C=O⋯π and C-H⋯π inter-actions are also present in the structure.

  6. Improved production of adipate with Escherichia coli by reversal of β-oxidation.

    PubMed

    Kallscheuer, Nicolai; Gätgens, Jochem; Lübcke, Marvin; Pietruszka, Jörg; Bott, Michael; Polen, Tino

    2017-03-01

    The linear C6 dicarboxylic acid adipic acid is an important bulk chemical in the petrochemical industry as precursor of the polymer nylon-6,6-polyamide. In recent years, efforts were made towards the biotechnological production of adipate from renewable carbon sources using microbial cells. One strategy is to produce adipate via a reversed β-oxidation pathway. Hitherto, the adipate titers were very low due to limiting enzyme activities for this pathway. In most cases, the CoA intermediates are non-natural substrates for the tested enzymes and were therefore barely converted. We here tested heterologous enzymes in Escherichia coli to overcome these limitations and to improve the production of adipate via a reverse β-oxidation pathway. We tested in vitro selected enzymes for the efficient reduction of the enoyl-CoA and in the final reaction for the thioester cleavage. The genes encoding the enzymes which showed in vitro the highest activity were then used to construct an expression plasmid for a synthetic adipate pathway. Expression of paaJ, paaH, paaF, dcaA, and tesB in E. coli BL21(DE3) resulted in the production of up to 36 mg/L of adipate after 30 h of cultivation. Beside the activities of the pathway enzymes, the availability of metabolic precursors may limit the synthesis of adipate, providing another key target for further strain engineering towards high-yield production of adipate with E. coli.

  7. Supra­molecular architecture in a co-crystal of the N(7)—H tautomeric form of N 6-benzoyl­adenine with adipic acid (1/0.5)

    PubMed Central

    Swinton Darious, Robert; Thomas Muthiah, Packianathan; Perdih, Franc

    2016-01-01

    The asymmetric unit of the title co-crystal, C12H9N5O·0.5C6H10O4, consists of one mol­ecule of N 6-benzoyl­adenine (BA) and one half-mol­ecule of adipic acid (AA), the other half being generated by inversion symmetry. The dihedral angle between the adenine and phenyl ring planes is 26.71 (7)°. The N 6-benzoyl­adenine mol­ecule crystallizes in the N(7)—H tautomeric form with three non-protonated N atoms. This tautomeric form is stabilized by intra­molecular N—H⋯O hydrogen bonding between the carbonyl (C=O) group and the N(7)—H hydrogen atom on the Hoogsteen face of the purine ring, forming an S(7) ring motif. The two carboxyl groups of adipic acid inter­act with the Watson–Crick face of the BA mol­ecules through O—H⋯N and N—H⋯O hydrogen bonds, generating an R 2 2(8) ring motif. The latter units are linked by N—H⋯N hydrogen bonds, forming layers parallel to (10-5). A weak C—H⋯O hydrogen bond is also present, linking adipic acid mol­ecules in neighbouring layers, enclosing R 2 2(10) ring motifs and forming a three-dimensional structure. C=O⋯π and C—H⋯π inter­actions are also present in the structure. PMID:27308047

  8. Efficacy of adding folic acid to foods.

    PubMed

    Fajardo, Violeta; Varela-Moreiras, Gregorio

    2012-06-01

    In the past, food fortification along with nutritional education and the decrease in food costs relative to income have proven successful in eliminating common nutritional deficiencies. These deficiencies such as goiter, rickets, beriberi, and pellagra have been replaced with an entirely new set of "emergent deficiencies" that were not previously considered a problem [e.g., folate and neural tube defects (NTDs)]. In addition, the different nutrition surveys in so-called affluent countries have identified "shortfalls" of nutrients specific to various age groups and/or physiological status. Complex, multiple-etiology diseases, such as atherosclerosis, diabetes, cancer, and obesity have emerged. Food fortification has proven an effective tool for tackling nutritional deficiencies in populations; but today a more reasonable approach is to use food fortification as a means to support but not replace dietary improvement strategies (i. e. nutritional education campaigns). Folic acid (FA) is a potential relevant factor in the prevention of a number of pathologies. The evidence linking FA to NTD prevention led to the introduction of public health strategies to increase folate intakes: pharmacological supplementation, mandatory or voluntary fortification of staple foods with FA, and the advice to increase the intake of folate-rich foods. It is quite contradictory to observe that, regardless of these findings, there is only limited information on food folate and FA content. Data in Food Composition Tables and Databases are scarce or incomplete. Fortification of staple foods with FA has added difficulty to this task. Globally, the decision to fortify products is left up to individual food manufacturers. Voluntary fortification is a common practice in many countries. Therefore, the "worldwide map of vitamin fortification" may be analyzed. It is important to examine if fortification today really answers to vitamin requirements at different ages and/or physiological states. The

  9. Structural characterization and thermal properties of polyamide 6.6/Mg, Al/adipate-LDH nanocomposites obtained by solid state polymerization

    SciTech Connect

    Herrero, M.; Benito, P.; Labajos, F.M.; Rives, V.; Zhu, Y.D.; Allen, G.C.; Adams, J.M.

    2010-07-15

    A new nanocomposite was obtained by dispersing an adipate-modified layered double hydroxide (Ad-LDH) with adipic acid and hexamethylene diamine. These samples were polymerized in the solid phase under a nitrogen flow for 200 min at 190 {sup o}C. The structural and compositional details of the nanocomposite were determined by powder X-ray diffraction (PXRD), fourier transform infrared (FTIR) spectroscopy, focused ion beam (FIB), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The PXRD patterns and FIB images show a partially intercalated and partially exfoliated dispersion of layered crystalline materials in the polyamide 6.6 matrix. The best dispersion level is achieved in polyamide 6.6/LDH nanocomposites with low LDH loading. Some residual tactoids and particle agglomerates are also evident at high concentration. The best thermal stability of the nanocomposites is shown by the sample with 0.1% LDH content, for which it is higher than that of pure polyamide. - Graphical abstract: A new nanocomposite was obtained by compounding an adipate-modified layered double hydroxides (LDH) with adipic acid and hexamethylene diamine. These samples were polymerized in the solid phase under a nitrogen flow for 200 min at 190 {sup o}C. The nanodispersion of LDH in polyamide 6.6 may be qualitatively estimated from the analysis and PXRD patterns and FIB images. The decomposition temperature in the nanocomposite with 0.1 % LDH increases significantly compared to that for pristine PA6.6. .

  10. Influence on the physicochemical properties of fish collagen gels using self-assembly and simultaneous cross-linking with the N-hydroxysuccinimide adipic acid derivative.

    PubMed

    Shen, Lirui; Tian, Zhenhua; Liu, Wentao; Li, Guoying

    2015-06-01

    Collagen gels from Southern catfish (Silurus meridionalis Chen) skins were prepared via the self-assembly of collagen molecules and simultaneous cross-linking with the N-hydroxysuccinimide adipic acid derivative (NHS-AA). The doses of NHS-AA were converted to [NHS-AA]/[NH2] ratios (0.025-1.6, calculated by the [active ester group] of NHS-AA and [ε-NH2] of lysine and hydroxylysine residues of collagen). When the ratio < 0.05, collagen gels were formed by collagen molecule self-assembly, resulting in the opalescent appearance of collagen gels and the characteristic D-periodicity of partial collagen fibrils, the collagen gel ([NHS-AA]/[NH2] = 0.05) displayed a small increase in denaturation temperature (Td, 42.8 °C), remaining weight (12.59%), specific water content (SWC 233.7) and elastic modulus (G' 128.4 Pa) compared with uncross-linked collagen gel (39.1 °C, 9.12%, 222.4 and 85.4 Pa, respectively). As the ratio > 0.05, disappearance of D-periodicity and a gradual change in appearance from opalescent to transparent suggested that the inhibition of NHS-AA in the self-assembly of collagen molecules was more obvious. As a result, the collagen gel ([NHS-AA]/[NH2] = 0.2) had the lowest Td (35.8 °C), remaining weight (7.96%), SWC (130.9) and G' (31.9 Pa). When the ratio was 1.6, the collagen molecule self-assembly was markedly suppressed and the formation of collagen gel was predominantly via the covalent cross-linking bonds which led to the transparent appearance, and the maximum values of Td (47.0 °C), remaining weight (45.92%) and G' (420.7 Pa) of collagen gel. These results indicated that collagen gels with different properties can be prepared using different NHS-AA doses.

  11. Amended final report of the safety assessment of dibutyl adipate as used in cosmetics.

    PubMed

    Andersen, Alan

    2006-01-01

    Dibutyl Adipate, the diester of butyl alcohol and adipic acid, functions as a plasticizer, skin-conditioning agent, and solvent in cosmetic formulations. It is reportedly used at a concentration of 5% in nail polish and 8% in suntan gels, creams, and liquids. Dibutyl Adipate is soluble in organic solvents, but practically insoluble in water. Dibutyl Adipate does not absorb radiation in the ultraviolet (UV) region of the spectrum. Dibutyl Adipate is not toxic in acute oral or dermal animal toxicity tests. In a subchronic dermal toxicity study, 1.0 ml/kg day-1 caused a significant reduction in body weight gain in rabbits, but 0.5 ml/kg/day1 was without effect. In a study with dogs, no adverse effects were observed when an emulsion containing 6.25% Dibutyl Adipate was applied to the entire body twice a week for 3 months. Dibutyl Adipate was tested for dermal irritation using rabbits and mice and a none to minimal irritation was observed. Dibutyl Adipate at a concentration of 25% was not a sensitizer in a guinea pig maximization study. Undiluted Dibutyl Adipate was minimally irritating to the eyes of rabbits and 0.1% was nonirritating. A significant increase in fetal gross abnormalities was observed in rats given intraperitoneal injections of Dibutyl Adipate at 1.75 ml/kg on 3 separate days during gestation, but no effect was seen in animals given 1.05 ml/kg. Dibutyl Adipate was not genotoxic in either bacterial or mammalian test systems. Clinical patch tests confirmed the absence of skin irritation found in animal tests. Clinical phototoxicity tests were negative. Dibutyl Adipate at 0.1% was not an ocular irritant in two male volunteers. In a clinical test of comedogenicity, Dibutyl Adipate produced no effect. The Cosmetic Ingredient Review (CIR) Expert Panel recognized that use of Dibutyl Adipate in suntan cosmetic products will result in repeated, frequent exposure in a leave-on product. The available data demonstrate no skin sensitization or cumulative skin

  12. Di(2-ethylhexyl)adipate

    Integrated Risk Information System (IRIS)

    Di ( 2 - ethylhexyl ) adipate ; CASRN 103 - 23 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Non

  13. Structural characterization and thermal properties of polyamide 6.6/Mg, Al/adipate-LDH nanocomposites obtained by solid state polymerization

    NASA Astrophysics Data System (ADS)

    Herrero, M.; Benito, P.; Labajos, F. M.; Rives, V.; Zhu, Y. D.; Allen, G. C.; Adams, J. M.

    2010-07-01

    A new nanocomposite was obtained by dispersing an adipate-modified layered double hydroxide (Ad-LDH) with adipic acid and hexamethylene diamine. These samples were polymerized in the solid phase under a nitrogen flow for 200 min at 190 °C. The structural and compositional details of the nanocomposite were determined by powder X-ray diffraction (PXRD), fourier transform infrared (FTIR) spectroscopy, focused ion beam (FIB), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The PXRD patterns and FIB images show a partially intercalated and partially exfoliated dispersion of layered crystalline materials in the polyamide 6.6 matrix. The best dispersion level is achieved in polyamide 6.6/LDH nanocomposites with low LDH loading. Some residual tactoids and particle agglomerates are also evident at high concentration. The best thermal stability of the nanocomposites is shown by the sample with 0.1% LDH content, for which it is higher than that of pure polyamide.

  14. ADIP ORNL contribution: 12th ADIP quarterly progress report for period October-December 1980. [Nb-1Zr

    SciTech Connect

    Puigh, R.; Duncan, D.; Ermi, A.M.; Gelles, D.; Zimmerchied, M.

    1980-01-01

    The following ADIP tasks are reported on: MFE-5 in-reactor fatigue crack growth in 316 SS in ORR, titanium alloy tensile properties after neutron irradiation in EBR-II, voids in neutron-irradiated Ti alloys, fabrication of ferritic alloys for RB-1 experiment in HFIR, microstructural examination of commercial ferritic alloys irradiated to very high fluence, microstructural examination of HT-9 archive material from the AD-2 test, and swelling of commercial alloys irradiated to a very high fluence. (DLC)

  15. Topological aspects of lanthanide-adipate-aqua compounds: Close packed and open framework structures

    NASA Astrophysics Data System (ADS)

    Chowdhuri, Durga Sankar; Kumar Jana, Swapan; Hazari, Debdoot; Zangrando, Ennio; Dalai, Sudipta

    2013-07-01

    A search in the Cambridge Structural Database (CSD) for lanthanide complexes with adipate [OOC(CH2)4COO]2- and aqua ligands retrieved a fair number of compounds. To this dataset a new lanthanum metal-organic framework, {[La2(adip)3(H2O)2] (1) (adipH2=adipic acid), synthesised and structurally characterized in these labs, was included. The crystal structures of these coordination polymers, of general formulation [Ln2(adip)3(H2O)x], exhibit a variety of topologies and dimensionality, which were clustered in different classes and described in detail. It was explored that the majority of these evidences the presence of metal chains or dinuclear Ln2 entities (separated in both cases by 4.0-4.8 Å), where lanthanide ions are differently connected by carboxylate groups with chelating or oxygen-bridging mode. The different amount of coordinated water molecules appear to affect the solid state networks. Moreover the crystal packing of these compounds shows peculiar aspects and examples were reported in the literature where the long alkyl chain of adipate connectors give rise to interpenetrated structures, or to porous material where lattice water or neutral larger molecules are clathrated.

  16. 78 FR 33748 - Diisopropyl Adipate; Exemption From the Requirement of a Tolerance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-05

    ... manufacturer, or pesticide manufacturer. The following list of North American Industrial Classification System... day oral toxicity study, male rats were given 0, 0.1, 1 or 5% adipic acid and female rats were given 0... growth retardation in males. In a 19 week oral toxicity study in rats, each rat was given 0, 50, 100,...

  17. Selected properties of acetylated adipate of retrograded starch.

    PubMed

    Zięba, T; Gryszkin, A; Kapelko, M

    2014-01-01

    Native potato starch (NS) and retrograded starch (R - obtained via freezing and defrosting of a starch paste) were used to prepare starch acetates: NS-A and R-A, and then acetylated distarch adipates: NS-ADA and R-ADA. The chemically-modified preparations produced from retrograded starch (R-A; R-ADA) were characterized by a higher degree of esterification compared to the modified preparations produced under the same conditions from native potato starch (NS-A; NS-ADA). Starch resistance to amylolysis was observed to increase (to 30-40 g/100 g) as a result of starch retrogradation and acetylation. Starch cross-linking had a significant impact on the increased viscosity of the paste in the entire course of pasting characteristics and on the increased values of rheological coefficients determined from the equations describing flow curves. The produced preparation of acetylated retrograded starch cross-linked with adipic acid (R-ADA) may be deemed an RS3/4 preparation to be used as a food thickening agent.

  18. Comparison of the hydrogen-bond patterns in 2-amino-1,3,4-thiadiazolium hydrogen oxalate, 2-amino-1,3,4-thiadiazole-succinic acid (1/2), 2-amino-1,3,4-thiadiazole-glutaric acid (1/1) and 2-amino-1,3,4-thiadiazole-adipic acid (1/1).

    PubMed

    Matulková, Irena; Císařová, Ivana; Němec, Ivan; Fábry, Jan

    2014-10-01

    The X-ray single-crystal structure determinations of the chemically related compounds 2-amino-1,3,4-thiadiazolium hydrogen oxalate, C2H4N3S(+)·C2HO4(-), (I), 2-amino-1,3,4-thiadiazole-succinic acid (1/2), C2H3N3S·2C4H6O4, (II), 2-amino-1,3,4-thiadiazole-glutaric acid (1/1), C2H3N3S·C5H8O4, (III), and 2-amino-1,3,4-thiadiazole-adipic acid (1/1), C2H3N3S·C6H10O4, (IV), are reported and their hydrogen-bonding patterns are compared. The hydrogen bonds are of the types N-H···O or O-H···N and are of moderate strength. In some cases, weak C-H···O interactions are also present. Compound (II) differs from the others not only in the molar ratio of base and acid (1:2), but also in its hydrogen-bonding pattern, which is based on chain motifs. In (I), (III) and (IV), the most prominent feature is the presence of an R2(2)(8) graph-set motif formed by N-H···O and O-H···N hydrogen bonds, which are present in all structures except for (I), where only a pair of N-H···O hydrogen bonds is present, in agreement with the greater acidity of oxalic acid. There are nonbonding S···O interactions present in all four structures. The difference electron-density maps show a lack of electron density about the S atom along the S···O vector. In all four structures, the carboxylic acid H atoms are present in a rare configuration with a C-C-O-H torsion angle of ∼0°. In the structures of (II)-(IV), the C-C-O-H torsion angle of the second carboxylic acid group has the more common value of ∼|180|°. The dicarboxylic acid molecules are situated on crystallographic inversion centres in (II). The Raman and IR spectra of the title compounds are presented and analysed.

  19. Effect of Alcohol Structure on the Optimum Condition for Novozym 435-Catalyzed Synthesis of Adipate Esters

    PubMed Central

    Abdul Rahman, Mohd Basyaruddin; Chaibakhsh, Naz; Basri, Mahiran

    2011-01-01

    Immobilized Candida antarctica lipase B, Novozym 435, was used as the biocatalyst in the esterification of adipic acid with four different isomers of butanol (n-butanol, sec-butanol, iso-butanol, and tert-butanol). Optimum conditions for the synthesis of adipate esters were obtained using response surface methodology approach with a four-factor-five-level central composite design concerning important reaction parameters which include time, temperature, substrate molar ratio, and amount of enzyme. Reactions under optimized conditions has yielded a high percentage of esterification (>96%) for n-butanol, iso-butanol, and sec-butanol, indicating that extent of esterification is independent of the alcohol structure for primary and secondary alcohols at the optimum conditions. Minimum reaction time (135 min) for achieving maximum ester yield was obtained for iso-butanol. The required time for attaining maximum yield and also the initial rates in the synthesis of di-n-butyl and di-sec-butyl adipate were nearly the same. Immobilized Candida antarctica lipase B was also capable of esterifying tert-butanol with a maximum yield of 39.1%. The enzyme is highly efficient biocatalyst for the synthesis of adipate esters by offering a simple production process and a high esterification yield. PMID:22389769

  20. Oil Biotechnology: Value-Added Products and Bioactive Fatty Acids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    During my 40+ years research career, I have been working on "biocatalysis" of hydrophobic organic compounds, both petroleum oil and vegetable oil, to convert them to value-added products. "Biocatalysis" is defined as the use of a biocatalyst such as whole microbial cells or enzymes, in an aqueous o...

  1. Production of Value-added Products by Lactic Acid Bacteria

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Lactic acid bacteria (LAB) are a group of facultative anaerobic, catalase negative, nonmotile and nonsporeforming–Gram positive bacteria. Most LAB utilize high energy C sources including monomer sugars to produce energy to maintain cellular structure and function. This anaerobic fermentation proce...

  2. Volatile fatty acids as an added value from biowaste.

    PubMed

    den Boer, Emilia; Łukaszewska, Agnieszka; Kluczkiewicz, Władysław; Lewandowska, Daria; King, Kevin; Reijonen, Tero; Kuhmonen, Tero; Suhonen, Anssi; Jääskeläinen, Ari; Heitto, Anneli; Laatikainen, Reino; Hakalehto, Elias

    2016-12-01

    The aim of the present work was to provide proof of concept of employing a co-culture of K. mobilis and E. coli for producing short and medium chain volatile fatty acids (VFAs) from kitchen biowaste and potato peels. To this aim, experiments were carried out at pilot-scale installation with a bioreactor of 250L. Different feeding strategies were tested under microaerobic conditions, at pH 6.0-6.5 in order to enhance chain elongation. Acetic acid and ethanol were dominating products in the initial stages of the bioprocess, but in a relatively short time of approx. 20-22h from the process start accumulation of propionic acid took place followed by a chain elongation to butyric and valeric acids. The highest final products yield of 325mg/g TS was achieved for the substrate load of 99.1g TS/L (VS of 91.1g/L) and pH 6.5, with the productivity of 448mg/L/h. However, the highest average VFAs chain length (3.77C) was observed in the process run with the loading of 63.2g TS/L and pH 6.0. In this study, we demonstrated that the existing symbiosis of the co-culture of K. mobilis and E. coli favours formation and chain elongation of VFA, induced most likely by the enhanced ethanol formation. Our finding differs from the previous research which focus mostly on anaerobic conditions of VFAs production. The results provide good basis for further optimisation of VFAs production process.

  3. Estimating the acidity of transition metal hydride and dihydrogen complexes by adding ligand acidity constants.

    PubMed

    Morris, Robert H

    2014-02-05

    A simple equation (pKa(THF) = ∑AL + Ccharge + Cnd + Cd6) can be used to obtain an estimate of the pKa of diamagnetic transition metal hydride and dihydrogen complexes in tetrahydrofuran, and, by use of conversion equations, in other solvents. It involves adding acidity constants AL for each of the ligands in the 5-, 6-, 7-, or 8-coordinate conjugate base complex of the hydride or dihydrogen complex along with a correction for the charge (Ccharge = -15, 0 or 30 for x = +1, 0 or -1 charge, respectively) and the periodic row of the transition metal (Cnd = 0 for 3d or 4d metal, 2 for 5d metal) as well as a correction for d(6) octahedral acids (Cd6 = 6 for d(6) metal ion in the acid, 0 for others) that are not dihydrogen complexes. Constants AL are provided for 13 commonly occurring ligand types; of these, nine neutral ligands are correlated with Lever's electrochemical ligand parameters EL. This method gives good estimates of the over 170 literature pKa values that range from less than zero to 50 with a standard deviation of 3 pKa units for complexes of the metals chromium to nickel, molybdenum, ruthenium to palladium, and tungsten to platinum in the periodic table. This approach allows a quick assessment of the acidity of hydride complexes found in nature (e.g., hydrogenases) and in industry (e.g., catalysis and hydrogen energy applications). The pKa values calculated for acids that have bulky or large bite angle chelating ligands deviate the most from this correlation. The method also provides an estimate of the base strength of the deprotonated form of the complex.

  4. ADS genes for reducing saturated fatty acid levels in seed oils

    DOEpatents

    Heilmann, Ingo H.; Shanklin, John

    2010-02-02

    The present invention relates to enzymes involved in lipid metabolism. In particular, the present invention provides coding sequences for Arabidopsis Desaturases (ADS), the encoded ADS polypeptides, and methods for using the sequences and encoded polypeptides, where such methods include decreasing and increasing saturated fatty acid content in plant seed oils.

  5. ADS genes for reducing saturated fatty acid levels in seed oils

    DOEpatents

    Heilmann, Ingo H; Shanklin, John

    2014-03-18

    The present invention relates to enzymes involved in lipid metabolism. In particular, the present invention provides coding sequences for Arabidopsis Desaturases (ADS), the encoded ADS polypeptides, and methods for using the sequences and encoded polypeptides, where such methods include decreasing and increasing saturated fatty acid content in plant seed oils.

  6. Data on synthesis of oligomeric and polymeric poly(butylene adipate-co-butylene terephthalate) model substrates for the investigation of enzymatic hydrolysis

    PubMed Central

    Perz, Veronika; Bleymaier, Klaus; Sinkel, Carsten; Kueper, Ulf; Bonnekessel, Melanie; Ribitsch, Doris; Guebitz, Georg M.

    2016-01-01

    The aliphatic-aromatic copolyester poly(butylene adipate-co-butylene terephthalate) (PBAT), also known as ecoflex, contains adipic acid, 1,4-butanediol and terephthalic acid and is proven to be compostable [1], [2], [3]). We describe here data for the synthesis and analysis of poly(butylene adipate-co-butylene terephthalate variants with different adipic acid:terephatalic acid ratios and 6 oligomeric PBAT model substrates. Data for the synthesis of the following oligomeric model substrates are described: mono(4-hydroxybutyl) terephthalate (BTa), bis(4-(hexanoyloxy)butyl) terephthalate (HaBTaBHa), bis(4-(decanoyloxy)butyl) terephthalate (DaBTaBDa), bis(4-(tetradecanoyloxy)butyl) terephthalate (TdaBTaBTda), bis(4-hydroxyhexyl) terephthalate (HTaH) and bis(4-(benzoyloxy)butyl) terephthalate (BaBTaBBa). Polymeric PBAT variants were synthesized with adipic acid:terephatalic acid ratios of 100:0, 90:10, 80:20, 70:30, 60:40 and 50:50. These polymeric and oligomeric substances were used as ecoflex model substrates in enzymatic hydrolysis experiments in the article “Substrate specificities of cutinases on aliphatic-aromatic polyesters and on their model substrates” [4]. PMID:26981550

  7. Short-fiber protein of ad40 confers enteric tropism and protection against acidic gastrointestinal conditions.

    PubMed

    Rodríguez, Ester; Romero, Carolina; Río, Adolfo; Miralles, Marta; Raventós, Aida; Planells, Laura; Burgueño, Joan F; Hamada, Hirofumi; Perales, Jose Carlos; Bosch, Assumpció; Gassull, Miguel Angel; Fernández, Ester; Chillon, Miguel

    2013-08-01

    The lack of vectors for selective gene delivery to the intestine has hampered the development of gene therapy strategies for intestinal diseases. We hypothesized that chimeric adenoviruses of Ad5 (species C) displaying proteins of the naturally enteric Ad40 (species F) might hold the intestinal tropism of the species F and thus be useful for gene delivery to the intestine. As oral-fecal dissemination of enteric adenovirus must withstand the conditions encountered in the gastrointestinal tract, we studied the resistance of chimeric Ad5 carrying the short-fiber protein of Ad40 to acid milieu and proteases and found that the Ad40 short fiber confers resistance to inactivation in acidic conditions and that AdF/40S was further activated upon exposure to low pH. In contrast, the chimeric AdF/40S exhibited only a slightly higher protease resistance compared with Ad5 to proteases present in simulated gastric juice. Then, the biodistribution of different chimeric adenoviruses by oral, rectal, and intravenous routes was tested. Expression of reporter β-galactosidase was measured in extracts of 15 different organs 3 days after administration. Our results indicate that among the chimeric viruses, only intrarectally given AdF/40S infected the colon (preferentially enteroendocrine cells and macrophages) and to a lesser extent, the small intestine, whereas Ad5 infectivity was very poor in all tissues. Additional in vitro experiments showed improved infectivity of AdF/40S also in different human epithelial cell lines. Therefore, our results point at the chimeric adenovirus AdF/40S as an interesting vector for selective gene delivery to treat intestinal diseases.

  8. Retention and utilization of amino acids in piglets fed ad libitum or restrictively diets supplemented with organic acids.

    PubMed

    Walz, O P; Pallauf, J

    1997-01-01

    In a metabolic trial 4 groups of 8 piglets of 5 kg weight each were kept individually for 45 days (final weight 23 kg) and fed a practical diet. At the beginning of the experiment the body amino acid contents of an additional group of 8 piglets were determined by carcass analysis, and at the end of the experiment the body amino acid contents of the 4 test group piglets (A = control fed ad libitum, B and C = supplement of 1.5% fumaric acid fed ad libitum or restrictively, D = supplement of 1.5% citric acid fed ad libitum) were also analysed. The amino acid retention during the experimental period was determined by difference. The supplements of fumaric or citric acid did not influence the amount of the amino acid retention. The quotient of amino acid retention to amino acid consumed or the "productive amino acid value" was calculated and the maintenance requirements of essential amino acids for piglets were used to estimate the productive amino acid value for both retention and maintenance. The mean amino acid retention amounted to about 56 g/d, i.e. 3.49 g/kg W0.75.d of essential amino acids. The essential amino acid requirements for maintenance was 2.0 g, i.e. 0.29 g/kg W0.75.d, showing a variation of 4% (Leu) to 20% (Met+Cys) when related to the amount of the corresponding amino acid retention. With regard to the amino acid pattern for retention of the nutritionally most important amino acids, the following ratios were found: Lys, 100 (6.27 g/16 g N): Met+Cys, 48 (3.03 g): Thr, 56 (3.49 g): Trp, 13 (0.80 g). The productive amino acid values ranged from 40% (Trp), 55% (Thr), 66% (Met) to 80% (Lys). Under the conditions investigated, neither the supplements of organic acids nor the feed restriction influenced the amino acid utilization.

  9. The multiple acyl-coenzyme A dehydrogenation disorders, glutaric aciduria type II and ethylmalonic-adipic aciduria. Mitochondrial fatty acid oxidation, acyl-coenzyme A dehydrogenase, and electron transfer flavoprotein activities in fibroblasts.

    PubMed Central

    Amendt, B A; Rhead, W J

    1986-01-01

    The multiple acyl-coenzyme A (CoA) dehydrogenation disorders (MAD) include severe (S) and mild (M) variants, glutaric aciduria type II (MAD:S) and ethylmalonic-adipic aciduria (MAD:M). Intact MAD:M mitochondria oxidized [1-14C]octanoate, [1-14C]palmityl-CoA, and [1,5-14C]glutarate at 20-46% of control levels; MAD:S mitochondria oxidized these three substrates at 0.4-18% of control levels. In MAD:M mitochondria, acyl-CoA dehydrogenase (ADH) activities were similar to control, whereas MAD:S ADH activities ranged from 38% to 73% of control. Electron transfer flavoprotein (ETF) activities in five MAD:M cell lines ranged from 29 to 51% of control (P less than 0.01); ETF deficiency was the primary enzymatic defect in two MAD:M lines. In four MAD:S patients, ETF activities ranged from 3% to 6% of control (P less than 0.001); flavin adenine dinucleotide addition increased residual ETF activity from 4% to 21% of control in a single MAD:S line (P less than 0.01). Three MAD:S patients had ETF activities ranging from 33 to 53% of control; other investigators found deficient ETF-dehydrogenase activity in these MAD:S and three of our MAD:M cell lines. PMID:3722376

  10. Investigation on the levitation force behaviour of malic acid added bulk MgB2 superconductors

    NASA Astrophysics Data System (ADS)

    Savaskan, B.; Taylan Koparan, E.; Celik, S.; Ozturk, K.; Yanmaz, E.

    2014-07-01

    The effects of malic acid addition (from 0 to 15 wt% of the total MgB2) on the levitation force properties of bulk MgB2 have been investigated. All samples were prepared from magnesium powder, amorphous boron powder, malic acid (C4H6O5) and toluene (C7H8) by using two-step solid state reaction method. Vertical and lateral levitation force measurements that are under both zero-field-cooled (ZFC) and field-cooled (FC) regimes were carried out at different temperatures of 24, 28 and 32 K for samples with various adding level. It was found that the reasonable malic acid adding has a positive impact on the levitation properties. At 24 K and 28 K, the 4 wt% and 6 wt% malic acid added samples exhibits a higher levitation force than pure sample. In the case of the optimally additive 4 wt% sample, the maximum levitation force corresponds to 18.60 N, whereas the pure sample shows 16.95 N at 24 K for ZFC regime. In this study the enhancing effect of malic acid adding on the levitation force properties of MgB2 has been first time investigated and reported.

  11. Dithiolopyrrolone antibiotic formation induced by adding valeric acid to the culture broth of Saccharothrix algeriensis.

    PubMed

    Merrouche, Rabiâa; Bouras, Noureddine; Coppel, Yannick; Mathieu, Florence; Monje, Marie-Carmen; Sabaou, Nasserdine; Lebrihi, Ahmed

    2010-06-25

    Three new antibiotics were isolated from the fermentation broth of Saccharothrix algeriensis NRRL B-24137 and characterized as the dithiolopyrrolone derivatives valerylpyrrothine (1), isovalerylpyrrothine (2), and formylpyrrothine (3) as well as the known antibiotic aureothricin. The production of the dithiolopyrrolone derivatives was induced by adding valeric acid to the culture medium. The compounds exhibited moderate antimicrobial activity in vitro.

  12. Phenylbutyric acid reduces amyloid plaques and rescues cognitive behavior in AD transgenic mice.

    PubMed

    Wiley, Jesse C; Pettan-Brewer, Christina; Ladiges, Warren C

    2011-06-01

    Trafficking through the secretory pathway is known to regulate the maturation of the APP-cleaving secretases and APP proteolysis. The coupling of stress signaling and pathological deterioration of the brain in Alzheimer's disease (AD) supports a mechanistic connection between endoplasmic reticulum (ER) stress and neurodegeneration. Consequently, small molecular chaperones, which promote protein folding and minimize ER stress, might be effective in delaying or attenuating the deleterious progression of AD. We tested this hypothesis by treating APPswePS1delta9 AD transgenic mice with the molecular chaperone phenylbutyric acid (PBA) for 14 months at a dose of 1 mg PBA g(-1) of body weight in the drinking water. Phenylbutyric acid treatment increased secretase-mediated APP cleavage, but was not associated with any increase in amyloid biosynthesis. The PBA-treated AD transgenic mice had significantly decreased incidence and size of amyloid plaques throughout the cortex and hippocampus. There was no change in total amyloid levels suggesting that PBA modifies amyloid aggregation or pathogenesis independently of biogenesis. The decrease in amyloid plaques was paralleled by increased memory retention, as PBA treatment facilitated cognitive performance in a spatial memory task in both wild-type and AD transgenic mice. The molecular mechanism underlying the cognitive facilitation of PBA is not clear; however, increased levels of both metabotropic and ionotropic glutamate receptors, as well as ADAM10 and TACE, were observed in the cortex and hippocampus of PBA-treated mice. The data suggest that PBA ameliorates the cognitive and pathological features of AD and supports the investigation of PBA as a therapeutic for AD.

  13. [Progress in engineering Escherichia coli for production of high-value added organic acids and alcohols].

    PubMed

    Wang, Jiming; Liu, Wei; Xu, Xin; Zhang, Haibo; Xian, Mo

    2013-10-01

    Confronted with the gradual exhaustion of the earth's fossil energy resources and the grimmer environmental deterioration, the bio-based process to produce high-value added platform chemicals from renewable biomass is attracting growing interest. Escherichia coli has been chosen as a workhouse for the production of many valuable chemicals due to various advantages, such as clear genetic background, convenient to be genetically modified and good growth properties with low nutrient requirements. Rational strain development of E. coli achieved by metabolic engineering strategies has provided new processes for efficiently biotechnological production of various high-value chemical building blocks. This review focuses on recent progresses in metabolic engineering of E. coli that lead to efficient recombinant biocatalysts for production of high-value organic acids such as succinic acid, 3-hydroxypropanoic acid and glucaric acid as well as alcohols like glycerol and xylitol. Besides, this review also discusses several other platform chemicals, including 2,5-furan dicarboxylic acid, aspartic acid, glutamic acid, itaconic acid, levulinic acid, 3-hydroxy-gamma-butyrolactone and sorbitol, which have not been produced by E. coli until now.

  14. Bioavailability of iron, vitamin A, zinc, and folic acid when added to condiments and seasonings.

    PubMed

    Degerud, Eirik M; Manger, Mari Skar; Strand, Tor A; Dierkes, Jutta

    2015-11-01

    Seasonings and condiments can be candidate vehicles for micronutrient fortification if consumed consistently and if dietary practices ensure bioavailability of the nutrient. In this review, we identify factors that may affect the bioavailability of iron, vitamin A, zinc, and folic acid when added to seasonings and condiments and evaluate their effects on micronutrient status. We take into consideration the chemical and physical properties of different forms of the micronutrients, the influence of the physical and chemical properties of foods and meals to which fortified seasonings and condiments are typically added, and interactions between micronutrients and the physiological and nutritional status of the target population. Bioavailable fortificants of iron have been developed for use in dry or fluid vehicles. For example, sodium iron ethylenediaminetetraacetic acid (NaFeEDTA) and ferrous sulfate with citric acid are options for iron fortification of fish and soy sauce. Furthermore, NaFeEDTA, microencapsulated ferrous fumarate, and micronized elemental iron are potential fortificants in curry powder and salt. Dry forms of retinyl acetate or palmitate are bioavailable fortificants of vitamin A in dry candidate vehicles, but there are no published studies of these fortificants in fluid vehicles. Studies of zinc and folic acid bioavailability in seasonings and condiments are also lacking.

  15. Composition and Fatty Acid Profile of Goat Meat Sausages with Added Rice Bran

    PubMed Central

    Gebrelul, Sebhatu

    2014-01-01

    A scientific consensus on the relationship between obesity, obesity related diseases, and diet has emerged. One of the factors is overconsumption of the red meats such as pork and beef. Goat meat has the potential to replace these traditionally consumed meats. Rice bran is a rich source of antioxidants such as vitamin E. In this study, goat meat sausages were formulated to contain 0, 1.5 or 3 percent stabilized rice bran. Proximate and fatty acid composition, α-tocopherol, cholesterol concentration, and antioxidant activities of cooked goat meat sausages containing varying percentages of rice bran were measured. Data were analyzed using a fixed effects model. The fat percentage in the goat meat sausages increased in response to increasing rice bran percentages (P < 0.001). Saturated fatty acids concentration decreased linearly (P < 0.01), while unsaturated fatty acids and omega-3 and omega-6 fatty acids increased linearly in response to increasing rice bran percentages (P < 0.05). The concentration of α-tocopherol in sausages increased linearly in response to increasing rice bran percentages (P < 0.01). Also, antioxidant activity increased linearly in sausages in response to added rice bran (P < 0.01). The cholesterol concentration of sausages did not vary significantly in response to added rice bran. PMID:26904643

  16. Bioavailability of iron, vitamin A, zinc, and folic acid when added to condiments and seasonings

    PubMed Central

    Degerud, Eirik M.; Manger, Mari Skar; Strand, Tor A.

    2015-01-01

    Seasonings and condiments can be candidate vehicles for micronutrient fortification if consumed consistently and if dietary practices ensure bioavailability of the nutrient. In this review, we identify factors that may affect the bioavailability of iron, vitamin A, zinc, and folic acid when added to seasonings and condiments and evaluate their effects on micronutrient status. We take into consideration the chemical and physical properties of different forms of the micronutrients, the influence of the physical and chemical properties of foods and meals to which fortified seasonings and condiments are typically added, and interactions between micronutrients and the physiological and nutritional status of the target population. Bioavailable fortificants of iron have been developed for use in dry or fluid vehicles. For example, sodium iron ethylenediaminetetraacetic acid (NaFeEDTA) and ferrous sulfate with citric acid are options for iron fortification of fish and soy sauce. Furthermore, NaFeEDTA, microencapsulated ferrous fumarate, and micronized elemental iron are potential fortificants in curry powder and salt. Dry forms of retinyl acetate or palmitate are bioavailable fortificants of vitamin A in dry candidate vehicles, but there are no published studies of these fortificants in fluid vehicles. Studies of zinc and folic acid bioavailability in seasonings and condiments are also lacking. PMID:26469774

  17. The modification and characterization of maleic anhydride-styrene-methyl metacrylate terpolymer by poly(ethylene adipate)

    NASA Astrophysics Data System (ADS)

    Boztuğ, Ali; Basan, Satilmiş

    2007-03-01

    In this study, the functionality of maleic anhydride was utilized in the maleic anhydride-styrene-methyl metacrylate (MAStMMA) terpolymer. First, the polyester of poly(ethylene adipate), PEA, polycondensation copolymer was synthesized from ethylene glycol and adipic acid monomers. PEA was then modified on its maleic anhydride units in the MAStMMA terpolymer which has been synthesized previously. This modified copolymer was characterized by FTIR (Fourier Transform Infrared spectroscopy). The viscosimetric and thermomechanical characterization of MAStMMA terpolymer and its modified copolymer were also performed and the results were compared. The modified copolymer obtained was found to be more elastic and more soluble, and had lower viscosity and density.

  18. 21 CFR 178.3690 - Pentaerythritol adipate-stearate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Pentaerythritol adipate-stearate. 178.3690 Section 178.3690 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND SANITIZERS Certain Adjuvants...

  19. Spoilage characteristics of traditionally packaged ground beef with added lactic acid bacteria displayed at abusive temperatures.

    PubMed

    Hoyle Parks, A R; Brashears, M M; Woerner, W D; Martin, J N; Thompson, L D; Brooks, J C

    2012-02-01

    Growth of pathogenic organisms such as Escherichia coli O157:H7 and Salmonella spp. can be inhibited in ground beef through the addition of certain lactic acid-producing bacteria (LAB; Lactobacillus acidophilus NP51, Lactobacillus crispatus NP35, Pediococcus acidilactici, and Lactococcus lactis ssp. lactis). This study evaluated the effects of LAB inclusion on the organoleptic and biochemical properties typically associated with spoilage in traditionally packaged ground beef displayed at abusive (10°C) temperatures for 36 h. Trained and untrained panelist evaluations of lean color and off-odor, as well as instrumental color analyses, did not indicate an effect on spoilage traits due to LAB utilization (P > 0.05). However, display length affected each variable independently and was indicative of decreased stability and acceptability as display time (h) increased (P < 0.05). Thiobarbituric acid values were decreased for ground beef with added LAB (P < 0.05), but likely can be related to bacterial degradation of lipid oxidation by-products because no reduction in organoleptic traits due to oxidation was noted between treatments. Overall, LAB did not adversely influence the spoilage characteristics of traditionally packaged ground beef displayed at abusive temperatures for up to 36 h. Furthermore, biochemical and sensory indicators of spoilage were present for all treatments at the conclusion of display. Therefore, LAB can be added to ground beef in traditional packaging as a processing intervention without masking or delaying the expected spoilage characteristics.

  20. Effect of added caffeic acid and tyrosol on the fatty acid and volatile profiles of camellia oil following heating.

    PubMed

    Haiyan, Zhong; Bedgood, Danny R; Bishop, Andrea G; Prenzler, Paul D; Robards, Kevin

    2006-12-13

    Camellia oil is widely used in some parts of the world partly because of its high oxidative stability. The effect of heating a refined camellia oil for 1 h at 120 degrees C or 2 h at 170 degrees C with exogenous antioxidant, namely, caffeic acid and tyrosol, was studied. Parameters used to assess the effect of heating were peroxide and K values, volatile formation, and fatty acid profile. Of these, volatile formation was the most sensitive index of change as seen in the number of volatiles and the total area count of volatiles in gas chromatograms. Hexanal was generally the dominant volatile in treated and untreated samples with a concentration of 2.13 and 5.34 mg kg(-1) in untreated oils heated at 120 and 170 degrees C, respectively. The hexanal content was significantly reduced in heated oils to which tyrosol and/or caffeic acid had been added. Using volatile formation as an index of oxidation, tyrosol was the more effective antioxidant of these compounds. This is contradictory to generally accepted antioxidant structure-activity relationships. Changes in fatty acid profiles after heating for up to 24 h at 180 degrees C were not significant.

  1. Oncosecretomics coupled to bioenergetics identifies α-amino adipic acid, isoleucine and GABA as potential biomarkers of cancer: Differential expression of c-Myc, Oct1 and KLF4 coordinates metabolic changes.

    PubMed

    Bellance, Nadège; Pabst, Lisa; Allen, Genevara; Rossignol, Rodrigue; Nagrath, Deepak

    2012-11-01

    Bioenergetic profiling of tumors is a new challenge of cancer research and medicine as therapies are currently being developed. Meanwhile, methodological means must be proposed to gather information on tumor metabolism in order to adapt these potential therapies to the bioenergetic specificities of tumors. Studies performed on tumors and cancer cell lines have shown that cancer cells bioenergetics is highly variable. This profile changes with microenvironmental conditions (eg. substrate availability), the oncogenes activated (and the tumor suppressors inactivated) and the interaction with the stroma (i.e. reverse Warburg effect). Here, we assessed the power of metabolic footprinting (MFP) to unravel the bioenergetics and associated anabolic changes induced by three oncogenes, c-Myc, KLF4 and Oct1. The MFP approach provides a quantitative analysis of the metabolites secreted and consumed by cancer cells. We used ultra performance liquid chromatography for quantifying the amino acid uptake and secretion. To investigate the potential oncogene-mediated alterations in mitochondrial metabolism, we measured oxygen consumption rate and ATP production as well as the glucose uptake and lactate release. Our findings show that c-Myc deficiency initiates the Warburg effect along with a reduction of mitochondrial respiration. KLF4 deficiency also stimulated glycolysis, albeit without cellular respiration impairment. In contrast, Oct1 deficiency reduced glycolysis and enhanced oxidative phosphorylation efficiency. MFP revealed that c-Myc, KLF4 and Oct1 altered amino acid metabolism with specific patterns. We identified isoleucine, α-aminoadipic acid and GABA (γ-aminoisobutyric acid) as biomarkers related. Our findings establish the impact of Oct1, KLF4 and c-Myc on cancer bioenergetics and evidence a link between oncosecretomics and cellular bioenergetics profile.

  2. Historic volcanism, European dry fogs, and greenland Acid precipitation, 1500 B.C. To a.d. 1500.

    PubMed

    Stothers, R B; Rampino, M R

    1983-10-28

    Historic dry fogs in Europe, acid precipitation in Greenland, and major explosive volcanic eruptions correlate well with each other between 1500 B.C. and A.D. 1500. European (Mediterranean and Icelandic) volcanic eruptions appear to be the source of at least five of the nine largest acidity signals found in Greenland ice for this period. Between 152 B.C. and A.D. 43, eruptions of sulfur-rich Mount Etna probably supplied about 15 percent of the smaller acidity signals.

  3. Cannabinoid receptor antagonist-induced striated muscle toxicity and ethylmalonic-adipic aciduria in beagle dogs.

    PubMed

    Tomlinson, Lindsay; Tirmenstein, Mark A; Janovitz, Evan B; Aranibar, Nelly; Ott, Karl-Heinz; Kozlosky, John C; Patrone, Laura M; Achanzar, William E; Augustine, Karen A; Brannen, Kimberly C; Carlson, Kenneth E; Charlap, Jeffrey H; Dubrow, Katherine M; Kang, Liya; Rosini, Laura T; Panzica-Kelly, Julieta M; Flint, Oliver P; Moulin, Frederic J; Megill, John R; Zhang, Haiying; Bennett, Michael J; Horvath, Joseph J

    2012-10-01

    Ibipinabant (IBI), a potent cannabinoid-1 receptor (CB1R) antagonist, previously in development for the treatment of obesity, causes skeletal and cardiac myopathy in beagle dogs. This toxicity was characterized by increases in muscle-derived enzyme activity in serum and microscopic striated muscle degeneration and accumulation of lipid droplets in myofibers. Additional changes in serum chemistry included decreases in glucose and increases in non-esterified fatty acids and cholesterol, and metabolic acidosis, consistent with disturbances in lipid and carbohydrate metabolism. No evidence of CB1R expression was detected in dog striated muscle as assessed by polymerase chain reaction, immunohistochemistry, Western blot analysis, and competitive radioligand binding. Investigative studies utilized metabonomic technology and demonstrated changes in several intermediates and metabolites of fatty acid metabolism including plasma acylcarnitines and urinary ethylmalonate, methylsuccinate, adipate, suberate, hexanoylglycine, sarcosine, dimethylglycine, isovalerylglycine, and 2-hydroxyglutarate. These results indicated that the toxic effect of IBI on striated muscle in beagle dogs is consistent with an inhibition of the mitochondrial flavin-containing enzymes including dimethyl glycine, sarcosine, isovaleryl-CoA, 2-hydroxyglutarate, and multiple acyl-CoA (short, medium, long, and very long chain) dehydrogenases. All of these enzymes converge at the level of electron transfer flavoprotein (ETF) and ETF oxidoreductase. Urinary ethylmalonate was shown to be a biomarker of IBI-induced striated muscle toxicity in dogs and could provide the ability to monitor potential IBI-induced toxic myopathy in humans. We propose that IBI-induced toxic myopathy in beagle dogs is not caused by direct antagonism of CB1R and could represent a model of ethylmalonic-adipic aciduria in humans.

  4. 40 CFR 721.8079 - Isophorone diisocyanate neopentyl glycol adipate polyurethane prepolymer.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... glycol adipate polyurethane prepolymer. 721.8079 Section 721.8079 Protection of Environment ENVIRONMENTAL... adipate polyurethane prepolymer. (a) Chemical substance and significant new uses subject to reporting. (1... polyurethane prepolymer (PMN P-94-1743) is subject to reporting under this section for the significant new...

  5. 40 CFR 721.8079 - Isophorone diisocyanate neopentyl glycol adipate polyurethane prepolymer.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... glycol adipate polyurethane prepolymer. 721.8079 Section 721.8079 Protection of Environment ENVIRONMENTAL... adipate polyurethane prepolymer. (a) Chemical substance and significant new uses subject to reporting. (1... polyurethane prepolymer (PMN P-94-1743) is subject to reporting under this section for the significant new...

  6. Enhanced Butanol Production Through Adding Organic Acids and Neutral Red by Newly Isolated Butanol-Tolerant Bacteria.

    PubMed

    Jiang, Cheng; Cao, Guangli; Wang, Zhenyu; Li, Ying; Song, Jinzhu; Cong, Hua; Zhang, Junzheng; Yang, Qian

    2016-12-01

    As alternative microorganisms for butanol production with high butanol tolerant and productivity are in high demand, one excellent butanol-tolerant bacterium, S10, was isolated and identified as Clostridium acetobutylicum S10. In order to enhance the performance of butanol production, organic acids and neutral red were added during butanol fermentation. Synergistic effects were exhibited in the combinations of organic acids and neutral red to promote butanol production. Consequently, the optimal concentrations of combined acetate, butyrate, and neutral red were determined at sodium acetate 1.61 g/L, sodium butyrate 1.88 g/L, and neutral red 0.79 g/L, respectively, with the butanol yield of 6.09 g/L which was 20.89 % higher than that in control. These results indicated that combination of adding organic acid and neutral red is a potential effective measure to improve butanol production.

  7. Lipid and fatty acid metabolism in Ralstonia eutropha: relevance for the biotechnological production of value-added products.

    PubMed

    Riedel, Sebastian L; Lu, Jingnan; Stahl, Ulf; Brigham, Christopher J

    2014-02-01

    Lipid and fatty acid metabolism has been well studied in model microbial organisms like Escherichia coli and Bacillus subtilis. The major precursor of fatty acid biosynthesis is also the major product of fatty acid degradation (β-oxidation), acetyl-CoA, which is a key metabolite for all organisms. Controlling carbon flux to fatty acid biosynthesis and from β-oxidation allows for the biosynthesis of natural products of biotechnological importance. Ralstonia eutropha can utilize acetyl-CoA from fatty acid metabolism to produce intracellular polyhydroxyalkanoate (PHA). R. eutropha can also be engineered to utilize fatty acid metabolism intermediates to produce different PHA precursors. Metabolism of lipids and fatty acids can be rerouted to convert carbon into other value-added compounds like biofuels. This review discusses the lipid and fatty acid metabolic pathways in R. eutropha and how they can be used to construct reagents for the biosynthesis of products of industrial importance. Specifically, how the use of lipids or fatty acids as the sole carbon source in R. eutropha cultures adds value to these biotechnological products will be discussed here.

  8. Electrochemical activity of iron in acid treated bentonite and influence of added nickel

    NASA Astrophysics Data System (ADS)

    Mudrinić, T.; Mojović, Z.; Milutinović-Nikolić, A.; Mojović, M.; Žunić, M.; Vukelić, N.; Jovanović, D.

    2015-10-01

    Bentonite originated from Mečji Do, Serbia, was submitted to acid treatment at 70 °C for 30 min, while only the concentration of applied HCl varied. The obtained acid treated samples were used to modify glassy carbon (GC) electrode. The effect of applied acid treatment on the electrochemical behavior of GC electrodes modified with these materials was investigated. Furthermore, the effect of the introduction of nickel into acid treated samples was studied. The incorporation of nickel into acid treated bentonite was achieved by either ion exchange or impregnation/decomposition method. The obtained samples were characterized using the following methods: inductively coupled plasma (ICP), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and electron spin resonance (ESR) spectroscopy. The electrochemical behavior of these samples was tested by cyclic voltammetry in 0.1 mol dm-3 H2SO4 solution. The ICP, FTIR and ESR results exhibited a slight decrease of iron content in the acid treated samples. XRD and FTIR results confirmed that the conditions applied for the acid treatment were mild enough for the smectite structure to be preserved. The electrocatalytic test showed that the current response of Fe2+/Fe3+ oxidation/reduction process increased on the GC electrodes separately modified with each of the acid treated samples in comparison with current obtained on the GC electrode modified with untreated sample. These results indicated that applied acid treatment probably increased the accessibility of the electroactive iron within smectite. Cyclic voltammograms obtained for the GC electrodes modified with acid treated bentonite materials showed greater anodic charge (qa) than cathodic charge (qc). This difference might be due to iron detachment from smectite structure during the oxidation process. Further modification of the selected acid treated sample with nickel species resulted in decreased current response of the Fe2+/Fe3+ oxidation

  9. In vitro release of clomipramine HCl and buprenorphine HCl from poly adipic anhydride (PAA) and poly trimethylene carbonate (PTMC) blends.

    PubMed

    Dinarvand, Rassoul; Alimorad, Mohammed Massoud; Amanlou, Massoud; Akbari, Hamid

    2005-10-01

    Controlled drug-delivery technology is concerned with the systematic release of a pharmaceutical agent to maintain a therapeutic level of the drug in the body for modulated and/or prolonged periods of time. This may be achieved by incorporating the therapeutic agent into a degradable polymer vehicle, which releases the agent continuously as the matrix erodes. In this study, poly trimethylene carbonate (PTMC), an aliphatic polycarbonate, and poly adipic anhydride (PAA), an aliphatic polyanhydride, were synthesized via melt condensation and ring-opening polymerization of trimethylene carbonate and adipic acid, respectively. The release of clomipramine HCl and buprenorphine HCl from discs prepared with the use of PTMC-PAA blends in phosphate buffer (pH 7.4) are also described. Clomipramine HCl and buprenorphine HCl were both used as hydrophilic drug models. Theoretical treatment of the data with the Peppas model revealed that release of clomipramine HCl (5%) in devices containing 70% PTMC or more followed a Fickian diffusion model. However, the releases of buprenorphine HCl (5%) in the same devices were anomalous. For devices containing 50% and more PAA, surface erosion may play a significant role in the release of both molecules.

  10. [The synthesis of RGD peptide derivatives containing glutaric and adipic residues].

    PubMed

    Vigorov, A Iu; Demin, A M; Nizova, I A; Krasnov, V P

    2014-01-01

    A method of the synthesis of RGD peptide derivatives containing glutaric or adipic residues linked with α-amino group of L-arginine and allowing carrying out their coupling with other biomolecules and nanoparticles.

  11. Microwave assisted conversion of microcrystalline cellulose into value added chemicals using dilute acid catalyst.

    PubMed

    Ching, Teck Wei; Haritos, Victoria; Tanksale, Akshat

    2017-02-10

    One of the grand challenges of this century is to transition fuels and chemicals production derived from fossil feedstocks to renewable feedstocks such as cellulosic biomass. Here we describe fast microwave conversion of microcrystalline cellulose (MCC) in water, with dilute acid catalyst to produce valuable platform chemicals. Single 10min microwave assisted treatment was able to convert >60% of MCC, with >50mol% yield of desirable products such as glucose, HMF, furfural and levulinic acid. Recycling of residual MCC with make-up fresh MCC resulted in an overall conversion of >93% after 5 cycles while maintaining >60% conversion in each cycle. Addition of isopropanol (70%v/v) as a co-solvent increased the yields of HMF and levulinic acid. This work shows for the first time proof of concept for complete conversion of recalcitrant microcrystalline cellulose in mild conditions of low temperature, dilute acid and short residence time using energy efficient microwave technology.

  12. Effect of baking process on added folic acid and endogenous folates stability in wheat and rye breads.

    PubMed

    Gujska, Elzbieta; Majewska, Katarzyna

    2005-06-01

    In Poland bread as a staple food both made from wheat and rye flour can be a potential product for future fortification with folic acid. The objective of the study was to examine the effect of fermentation and baking on added folic acid and some endogenous folates stability during breadmaking of rye and wheat breads. Breads were produced using the formulation containing enriched flour with 0.2 mg folic acid/100 g product, baker's yeast and additionally ascorbic acid for wheat bread and lactic acid for rye bread. Folates were extracted with Hepes/Ches buffer (pH = 7.85) followed by destruction of matrix by amylase and protease and deconjugation with rat serum conjugase. Affinity chromatography (FBP bovine milk) was used to purify and concentrate samples. The folates were separated by HPLC with C18 column and with a combination of fluorescence and UV detection. For both rye and wheat breads there was a decrease of folic acid from flour to bread stage. The total losses depend on baking process and ranged from 12 to 21%. Some changes in the level of different native folate forms during the stage of baking process were also observed.

  13. Wheat straw hemicelluloses added with cellulose nanocrystals and citric acid. Effect on film physical properties.

    PubMed

    Pereira, Paulo H F; Waldron, Keith W; Wilson, David R; Cunha, Arcelina P; Brito, Edy S de; Rodrigues, Tigressa H S; Rosa, Morsyleide F; Azeredo, Henriette M C

    2017-05-15

    Wheat straw has been used as a source of hemicelluloses (WSH) and cellulose nanocrystals (CNC) for the elaboration of biodegradable films. Different films have been formed by using WSH as a matrix and different contents of CNC and citric acid. The predominant hemicelluloses were arabinoxylans. CNC reinforced the films, improving tensile strength and modulus, water resistance and water vapor barrier. Citric acid, on the other hand, presented concomitant plasticizing and crosslinking effects (the latter also evidenced by FTIR), probably due to a crosslinking extension by glycerol. The use of 5.9wt% CNC and 30wt% citric acid was defined as optimal conditions, resulting in minimum water sensitivity and permeability, while maintaining a good combination of tensile properties. Under those conditions, the films presented enhanced modulus, elongation, water resistance, and barrier to water vapor when compared to the control WSH film, and might be used for wrapping or coating a variety of foods.

  14. Enhancement and modeling of microparticle-added Rhizopus oryzae lactic acid production.

    PubMed

    Coban, Hasan Bugra; Demirci, Ali

    2016-02-01

    Lactic acid has a wide industrial application area and can be produced by fungal strains. However, excessive bulk growth form of fungi during the fermentations is a major problem, which limits the fermentation performance. Microparticles are excellent tools to prevent bulk fungal growth and provide homogenized fermentation broth to increase uniformity and the prediction performance of the models. Therefore, in this study, addition of aluminum oxide and talcum microparticles into fermentations was evaluated to enhance the production of lactic acid by Rhizopus oryzae. The results showed that the bulk fungal growth was prevented and the lactic acid concentration increased from 6.02 to 13.88 and 24.01 g/L, when 15 g/L of aluminum oxide or 10 g/L of talcum was used, respectively, in the shake-flask fermentations. Additionally, substrate concentration, pH, and agitation were optimized in the bioreactors using response surface methodology, and optimum values were determined as 126 g/L of glucose, 6.22 pH, and 387 rpm, respectively. Under these conditions, lactic acid production further increased to 75.1 ± 1.5 g/L with 10 g/L of talcum addition. Also, lactic acid production and glucose consumption in the batch fermentation were successfully modeled with modified Gompertz model and modified logistic model. RMSE and MAE values for lactic acid production were calculated as 2.279 and 1.498 for the modified Gompertz model; 3.6 and 4.056 for the modified logistic model. Additionally, modified logistic model predicted glucose consumption with -2.088 MAE and 2.868 RMSE, whereas these values were calculated as 2.035 and 3.946 for the modified Gompertz model.

  15. Partial characterization of chayotextle starch-based films added with ascorbic acid encapsulated in resistant starch.

    PubMed

    Martínez-Ortiz, Miguel A; Vargas-Torres, Apolonio; Román-Gutiérrez, Alma D; Chavarría-Hernández, Norberto; Zamudio-Flores, Paul B; Meza-Nieto, Martín; Palma-Rodríguez, Heidi M

    2017-05-01

    Chayotextle starch was modified by subjecting it to a dual treatment with acid and heating-cooling cycles. This caused a decrease in the content of amylose, which showed values of 30.22%, 4.80%, 3.27% and 3.57% for native chayotextle starch (NCS), starch modified by acid hydrolysis (CMS), and CMS with one (CMS1AC) and three autoclave cycles (CMS3AC), respectively. The percentage of crystallinity showed an increase of 36.9%-62% for NCS and CMS3AC. The highest content of resistant starch (RS) was observed in CMS3AC (37.05%). The microcapsules were made with CMS3AC due to its higher RS content; the total content of ascorbic acid of the microcapsules was 82.3%. The addition of different concentrations of CMS3AC microcapsules (0%, 2.5%, 6.255% and 12.5%) to chayotextle starch-based films (CSF) increased their tensile strength and elastic modulus. The content of ascorbic acid and RS in CSF was ranged from 0% to 59.4% and from 4.84% to 37.05% in the control film and in the film mixed with CMS3AC microcapsules, respectively. Water vapor permeability (WVP) values decreased with increasing concentrations of microcapsules in the films. Microscopy observations showed that higher concentrations of microcapsules caused agglomerations due their poor distribution in the matrix of the films.

  16. Crystal structure of nicotinic acid mononucleotide adenylyltransferase from Staphyloccocus aureus: structural basis for NaAD interaction in functional dimer.

    PubMed

    Han, Seungil; Forman, Michael D; Loulakis, Pat; Rosner, Michelle H; Xie, Zhi; Wang, Hong; Danley, Dennis E; Yuan, Wei; Schafer, John; Xu, Zuoyu

    2006-07-21

    Bacterial nicotinic acid mononucleotide adenylyltransferase (NaMNAT; EC 2.7.7.18) encoded by the nadD gene, is essential for cell survival and is thus an attractive target for developing new antibacterial agents. The NaMNAT catalyzes the transfer of an adenylyl group of ATP to nicotinic acid mononucleotide (NaMN) to form nicotinic acid dinucleotide (NaAD). Two independently derived, high-resolution structures of Staphylococcus aureus NaMNAT-NaAD complexes establish the conserved features of the core dinucleotide-binding fold with other adenylyltransferases from bacteria to human despite a limited sequence conservation. The crystal structures reveal that the nicotinate carboxylates of NaAD are recognized by interaction with the main-chain amides of Thr85 and Tyr117, a positive helix dipole and two bridged-water molecules. Unlike other bacterial adenylyltransferases, where a partially conserved histidine residue interacts with the nicotinate ring, the Leu44 side-chain interacts with the nicotinate ring by van der Waals contact. Importantly, the S. aureus NaMNAT represents a distinct adenylyltransferase subfamily identifiable in part by common features of dimerization and substrate recognition in the loop connecting beta5 to beta6 (residues 132-146) and the additional beta6 strand. The unique beta6 strand helps orient the residues in the loop connecting beta5 to beta6 for substrate/product recognition and allows the beta7 strand structural flexibility to make key dimer interface interactions. Taken together, these structural results provide a molecular basis for understanding the coupled activity and recognition specificity for S. aureus NaMNAT and for rational design of selective inhibitors.

  17. Exploitation of sweet cherry (Prunus avium L.) puree added of stem infusion through fermentation by selected autochthonous lactic acid bacteria.

    PubMed

    Di Cagno, Raffaella; Surico, Rosalinda Fortunata; Minervini, Giovanna; Rizzello, Carlo Giuseppe; Lovino, Raffaella; Servili, Maurizio; Taticchi, Agnese; Urbani, Sefania; Gobbetti, Marco

    2011-08-01

    Strains of Lactobacillus plantarum, Pediococcus acidilactici, Pediococcus pentosaceus and Leuconostoc mesenteroides subsp. mesenteroides were identified from 8 cultivars of sweet cherry by partial 16S rRNA gene sequence and subjected to typing by Random Amplified Polymorphic DNA-Polymerase Chain Reaction (RAPD-PCR) analysis. Representative isolates from each species and each cultivar were screened based on the kinetics of growth on cherry puree added of (10%, v/v) stem infusion (CP-SI). A protocol for processing and storage of CP-SI, which included fermentation by selected autochthonous P. pentosaceus SWE5 and L. plantarum FP3 (started CP-SI) or spontaneous fermentation (unstarted CP-SI), was set up. Starters grew and remained viable at elevated cell numbers (ca. 9.0 log cfu g(-1)) during 60 days of storage at 4 °C. The number of presumptive lactic acid bacteria of the unstarted CP-SI did not exceed the value of ca. 3.0 log cfu g(-1). Consumption of carbohydrates (e.g., glucose and fructose) by starter lactic acid bacteria was limited as well as it was the lactic acid fermentation. Consumption of organic acids (e.g., malic acid) and free amino acids was evident, especially, throughout storage. Compared to CP-SI before processing, the concentrations of total phenolic compounds and anthocyanins did not vary in the started CP-SI. The concentration of anthocyanins slightly decreased in the unstarted CP-SI. The antioxidant activity, expressed as the scavenging activity toward DPPH radical, was found at highest level in the started CP-SI which approached that found in CP-SI before processing. During storage, viscosity and, especially, color indexes of started CP-SI were higher than those found in the unstarted CP-SI. Fermentation by autochthonous lactic acid bacteria seemed to also positively interfere with the sensory attributes of CP-SI.

  18. RETRACTED: Crystal growth and spectroscopic characterization of Aloevera amino acid added lithium sulfate monohydrate: A non-linear optical crystal

    NASA Astrophysics Data System (ADS)

    Manimekalai, R.; Antony Joseph, A.; Ramachandra Raja, C.

    2014-03-01

    This article has been retracted: please see Elsevier Policy on Article Withdrawal. This article has been retracted at the request of authors. According to the author we have reported Aloevera Amino Acid added Lithium sulphate monohydrate [AALSMH] crystal is a new nonlinear optical crystal. From the recorded high performance liquid chromatography spectrum, by matching the retention times with the known compounds, the amino acids present in our extract are identified as homocystine, isoleucine, serine, leucine and tyrosine. From the thin layer chromatography and colorimetric estimation techniques, presence of isoleucine was identified and it was also confirmed by NMR spectrum. From the above studies, we came to conclude that AALSMH is new nonlinear optical crystal. After further investigation, lattice parameter values of AALSMH are coinciding with lithium sulphate. Therefore we have decided to withdraw our paper. Sorry for the inconvenience and time spent.

  19. Value-added potential of expeller-pressed canola oil refining: characterization of sinapic acid derivatives and tocopherols from byproducts.

    PubMed

    Chen, Yougui; Thiyam-Hollander, Usha; Barthet, Veronique J; Aachary, Ayyappan A

    2014-10-08

    Valuable phenolic antioxidants are lost during oil refining, but evaluation of their occurrence in refining byproducts is lacking. Rapeseed and canola oil are both rich sources of sinapic acid derivatives and tocopherols. The retention and loss of sinapic acid derivatives and tocopherols in commercially produced expeller-pressed canola oils subjected to various refining steps and the respective byproducts were investigated. Loss of canolol (3) and tocopherols were observed during bleaching (84.9%) and deodorization (37.6%), respectively. Sinapic acid (2) (42.9 μg/g), sinapine (1) (199 μg/g), and canolol (344 μg/g) were found in the refining byproducts, namely, soap stock, spent bleaching clay, and wash water, for the first time. Tocopherols (3.75 mg/g) and other nonidentified phenolic compounds (2.7 mg sinapic acid equivalent/g) were found in deodistillates, a byproduct of deodorization. DPPH radical scavenging confirmed the antioxidant potential of the byproducts. This study confirms the value-added potential of byproducts of refining as sources of endogenous phenolics.

  20. Adding value to plant oils and fatty acids: Biological transformation of fatty acids into ω-hydroxycarboxylic, α,ω-dicarboxylic, and ω-aminocarboxylic acids.

    PubMed

    Seo, Joo-Hyun; Lee, Sun-Mee; Lee, Jinwon; Park, Jin-Byung

    2015-12-20

    Not only short chain ω-hydroxycarboxylic acids, α,ω-dicarboxylic acids, and ω-aminocarboxylic acids but also medium to long chain carboxylic acids are widely used as building blocks and intermediates in the chemical, pharmaceutical, and food industries. Thereby, recent achievements in biological production of medium to long chain carboxylic acids are addressed here. ω-Hydroxycarboxylic and α,ω-dicarboxylic acids were synthesized via terminal CH bond oxygenation of fatty acids and/or internal oxidative cleavage of the fatty acid carbon skeletons. ω-Aminocarboxylic acids were enzymatically produced from ω-hydroxycarboxylic acids via ω-oxocarboxylic acids. Productivities and product yields of some of the products are getting close to the industrial requirements for large scale production.

  1. Effects of adding supplemental tallow to diets containing distillers dried grains with solubles on fatty acid digestibility in growing pigs.

    PubMed

    Davis, J M; Urriola, P E; Baidoo, S K; Johnston, L J; Shurson, G C

    2015-01-01

    An experiment was conducted to measure the apparent ileal digestibility (AID) and apparent total tract digestibility (ATTD) of fatty acids in diets containing 0 or 30% corn distillers dried grains with solubles (DDGS) and 0, 5, or 10% tallow. Barrows (n = 24; initial BW = 25 kg) were surgically fitted with a T-cannula at the distal ileum. Pigs (n = 4/diet) were randomly assigned to diets: corn-soybean meal control (CON), CON plus 5% tallow (5T0D), CON plus 10% tallow (10T0D), CON plus 30% DDGS (0T30D), CON plus 5% tallow and 30% DDGS (5T30D), and CON plus 10% tallow and 30% DDGS (10T30D). Eight replicates per treatment were achieved by randomizing diets among pigs for a second collection period. Each pig was fed their respective diet for a 5-d adaptation period followed by 3-d fecal collection and 2-d ileal digesta collection periods. The AID and ATTD of fatty acids was calculated using the index method and acid-insoluble ash as an indigestible marker. When tallow was added to diets with 0% DDGS, there was no effect on AID of palmitic acid (C16:0) or SFA, while AID of stearic acid (C18:0) was increased (66.87% for CON, 72.06% for 5T0D, and 76.81% for 10T0D; P < 0.01). However, when diets contained 30% DDGS, the AID of all SFA was reduced as levels of tallow increased C16:0 (77.62% for 0T30D, 69.66% for 5T30D, and 68.43% for 10T30D), C18:0 (85.87% for 0T30D, 64.08% for 5T30D, and 61.25% for 10T30D), and SFA (79.88% for 0T30D, 68.23% for 5T30D, and 66.29% for 10T30D). The AID of MUFA was not affected when tallow was added to diets with 30% DDGS but actually increased in 5T0D and 10T0D. The amount of apparent ileal digested fatty acids increased with the addition of DDGS and tallow regardless of their digestibility. Amounts of ileal digested MUFA and PUFA increased when both DDGS (P < 0.01) and tallow (P < 0.01) were included in the diet compared to when either ingredient was excluded. For ileal digestible SFA, an interaction (P < 0.01) between DDGS and tallow was

  2. Utilisation of single added fatty acids by consortia of digester sludge in batch culture

    SciTech Connect

    Wagner, Andreas Otto; Gstrauntaler, Gudrun; Illmer, Paul

    2010-10-15

    Inocula derived from an anaerobic digester were used to study (i) their potential for methane production and (ii) the utilisation rates of different short chain fatty acids (SCFAs) by the microbial community in defined media with mono-carbon sources (formic-, acetetic-, propionic-, butyric acid) in batch culture. It could be demonstrated that the microbial reactor population could be transferred successfully to the lab, and its ability to build up methane was present even with deteriorating biogas plant performance. Therefore, this reduction in performance of the biogas plant was not due to a decrease in abundance, but due to an inactivity of the microbial community. Generally, the physico-chemical properties of the biogas plant seemed to favour hydrogenotrophic methanogens, as seen by the high metabolisation rates of formate compared with all other carbon sources. In contrast, acetoclastic methanogenesis could be shown to play a minor role in the methane production of the investigated biogas plant, although the origin of up to 66% of methane is generally suggested to be generated through acetoclastic pathway.

  3. Promoted degradation of perfluorooctanic acid by persulfate when adding activated carbon.

    PubMed

    Lee, Yu-Chi; Lo, Shang-Lien; Kuo, Jeff; Huang, Chin-Pao

    2013-10-15

    Treatment of persistent perfluorooctanoic acid (PFOA) in water using persulfate (PS) oxidation typically requires an elevated temperature or UV irradiation, which is energy-consuming. Under relatively low temperatures of 25-45°C, activated carbon (AC) activated PS oxidation of PFOA was evaluated for its potential of practical applications. With presence of AC in PS oxidation, PFOA removal efficiency at 25°C reached 682% with a high defluorination efficiency of 549% after 12h and few intermediates of short-chain perfluorinated carboxylic acids (PFCAs) were found. The removal and defluorination rates with the combined AC/PS system were approximately 12 and 19 times higher than those of the PS-only system, respectively. Activated carbon not only removes PFOA through adsorption, but also activates PS to form sulfate radicals that accelerate the decomposition and mineralization of PFOA. The activation energy for PS oxidation of PFOA was reduced from 668 to 261kJ/mol by the catalytic effect of AC, which implies a lower reaction temperature and a shorter reaction time would suffice. A 2-cycle schematic reaction mechanism was used to describe PS oxidation of PFOA with the generation of various intermediates and end-products.

  4. Development of silver/titanium dioxide/chitosan adipate nanocomposite as an antibacterial coating for fruit storage

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A novel nanocomposite of silver/titanium dioxide/chitosan adipate (Ag/TiO2/CS) was developed through photochemical reduction using a chitosan adipate template. Chitosan served as a reducing agent for the metal ions, and anchored metal ions by forming Ag–N coordination bonds and electrostatic attract...

  5. Adding monounsaturated fatty acids to a dietary portfolio of cholesterol-lowering foods in hypercholesterolemia

    PubMed Central

    Jenkins, David J.A.; Chiavaroli, Laura; Wong, Julia M.W.; Kendall, Cyril; Lewis, Gary F.; Vidgen, Edward; Connelly, Philip W.; Leiter, Lawrence A.; Josse, Robert G.; Lamarche, Benoît

    2010-01-01

    Background Higher intake of monounsaturated fat may raise high-density lipoprotein (HDL) cholesterol without raising low-density lipoprotein (LDL) cholesterol. We tested whether increasing the monounsaturated fat content of a diet proven effective for lowering LDL cholesterol (dietary portfolio) also modified other risk factors for cardiovascular disease, specifically by increasing HDL cholesterol, lowering serum triglyceride and further reducing the ratio of total to HDL cholesterol. Methods Twenty-four patients with hyperlipidemia consumed a therapeutic diet very low in saturated fat for one month and were then randomly assigned to a dietary portfolio low or high in monounsaturated fatty acid for another month. We supplied participants’ food for the two-month period. Calorie intake was based on Harris–Benedict estimates for energy requirements. Results For patients who consumed the dietary portfolio high in monounsaturated fat, HDL cholesterol rose, whereas for those consuming the dietary portfolio low in monounsaturated fat, HDL cholesterol did not change. The 12.5% treatment difference was significant (0.12 mmol/L, 95% confidence interval [CI] 0.05 to 0.21, p = 0.003). The ratio of total to HDL cholesterol was reduced by 6.5% with the diet high in monounsaturated fat relative to the diet low in monounsaturated fat (−0.28, 95% CI −0.59 to −0.04, p = 0.025). Patients consuming the diet high in monounsaturated fat also had significantly higher concentrations of apolipoprotein AI, and their C-reactive protein was significantly lower. No treatment differences were seen for triglycerides, other lipids or body weight, and mean weight loss was similar for the diets high in monounsaturated fat (−0.8 kg) and low in monounsaturated fat (−1.2 kg). Interpretation Monounsaturated fat increased the effectiveness of a cholesterol-lowering dietary portfolio, despite statin-like reductions in LDL cholesterol. The potential benefits for cardiovascular risk were

  6. Synthesis and characterization of polyacids from palm acid oil and sunflower oil via addition reaction.

    PubMed

    Zeimaran, Ehsan; Kadir, Mohammed Rafiq Abdul; Nor, Hussin Mohd; Kamarul, Tunku; Djordjevic, Ivan

    2013-12-15

    In this study aliphatic polyacids were synthesized using palm acid oil (PAO) and sunflower oil (SFO) via addition reaction technique. The synthesized materials were characterized using Fourier-transform infra-red (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-ToF-MS) and thermo-gravimetric analysis (TGA). Mixing formic acid and hydrogen peroxide with PAO or SFO at the ratio 3:10:1 produced the lowest iodine value of 10.57 and 9.24 respectively, indicating the increase in epoxidization of both oils. Adding adipic acid to the epoxidized oils at a ratio of 1:10 increases the acid values of SFO and PAO to 11.22 and 6.73 respectively. The existence of multi-acid groups present in synthesized polyacid was confirmed by MALD-ToF-MS. This feature indicates a possible value to the biomaterials development.

  7. Characterization of lignocellulosic compositions' degradation during chicken manure composting with added biochar by phospholipid fatty acid (PLFA) and correlation analysis.

    PubMed

    Liu, Ning; Zhou, Jialiang; Han, Lujia; Huang, Guangqun

    2017-05-15

    Biorefractory high polymer lignocellulosic compositions may limit rapid composting and stable decomposition. Because their degradation during composting is not well understood, the correlation with microbial community profiles was assessed to reveal degradation mechanism of lignocellulosic compositions. Testing of chicken manure aerobic composting with added biochar was performed using phospholipid fatty acid (PLFA) and correlation analysis. Results demonstrated a good composting effect with good dynamic correlation between microbial characteristic (PLFA) and lignocellulosic compositions' degradation ratio. The prediction model for hemicellulose degradation ratio (R(2)=0.97, SEP=3.24) and the prediction model for cellulose degradation ratio (R(3)=0.94, SEP=3.09), built using PLFA 16:0-18:2ω6c and PLFA 18:2ω6c-18:3ω3 as the arguments had good predictive ability. Based on microbial analysis and quantitative characterization of the degradation ratio, the prediction models provided methodological support for delineating the mechanism of lignocellulosic compositions' degradation during chicken manure aerobic composting with added biochar.

  8. [Synthesis of diisooctyl adipate catalyzed by lipase-displaying Pichia pastoris whole-cell biocatalysts].

    PubMed

    Zhang, Na; Jin, Zi; Lin, Ying; Zheng, Suiping; Han, Shuangyan

    2013-07-01

    An enzyme-displaying yeast as a whole-cell biocatalyst is an alternative to immobilized enzyme, due to its low-cost preparation and simple recycle course. Here, lipase-displaying Pichia pastoris whole-cell was used as a biocatalyst to synthesize diisooctyl adipate in the non-aqueous system. The maximum productivity of diisooctyl adipate was obtained as 85.0% in a 10 mL reaction system. The yield could be reached as high as 97.8% when the reaction system was scaled up to 200 mL. The purity obtained is 98.2% after vacuum distillation. Thus, the lipase-displaying P. pastoris whole-cell biocatalyst was promising in commercial application for diisooctyl adipate synthesis in non-aqueous phase.

  9. Production of Optically Pure D-Lactic Acid by the Combined use of Weissella sp. S26 and Bacillus sp. ADS3.

    PubMed

    Li, Qingxin; Hudari, Mohammad Sufian Bin; Wu, Jin Chuan

    2016-01-01

    Optically pure D-lactic acid was produced from glucose, xylose, or starch by the combined use of Weissella sp. S26 and Bacillus sp. ADS3, two native bacterial strains isolated from Singapore environment. Weissella sp. S26 was used to ferment various sugars to lactic acid rich in D-isomer followed by sterilization of the broth and inoculation of Bacillus sp. ADS3 cells to selectively degrade acetic acid (if any) and L-lactic acid. In a simultaneous saccharification and fermentation of starch by Weissella sp. S26 in 1 L of modified MRS medium containing 50 g/L starch at 30 °C, lactic acid reached 24.2 g/L (23.6 g/L of D-isomers and 0.6 g/L of L-isomers), and acetic acid was 11.8 g/L at 37 h. The fermentation broth was sterilized at 100 °C for 20 min and cooled down to 30 °C followed by inoculation of Bacillus sp. ADS3 (10 %, v/v), and the mixture was kept at 30 °C for 115 h. Acetic acid was completely removed, and L-lactic acid was largely removed giving an optical purity of D-lactic acid as high as 99.5 %.

  10. Effect of cooking on the chemical composition of low-salt, low-fat Wakame/olive oil added beef patties with special reference to fatty acid content.

    PubMed

    López-López, I; Cofrades, S; Cañeque, V; Díaz, M T; López, O; Jiménez-Colmenero, F

    2011-09-01

    Changes in chemical composition, with special reference to fatty acids, as affected by cooking, were studied in low-salt (0.5%)/low-fat patties (10%) with added Wakame (3%) and partial or total replacement of pork backfat with olive oil-in-water emulsion. The addition of Wakame and olive oil-in-water emulsion improved (P < 0.05) the binding properties and the cooking retention values of moisture, fat, fatty acids and ash, which were close to 100%. Partial and total replacement of animal fat with olive oil-in-water emulsion reduced (P < 0.05) saturated fatty acids (SFAs), while total replacement also reduced (P < 0.05) polyunsaturated fatty acid (PUFAs) contents. The fatty acid concentration in cooked patties was affected by product formulation. Unlike the case of all animal fat patties, when olive oil was added the cooking process increased (P < 0.05) SFAs, monounsaturated fatty acids (MUFAs) and PUFA n-3 (linolenic acid) and n-6 (linoleic acid) contents. Cooked formulated patties with seaweed and partial or total replacement of pork backfat by oil-in-water emulsion and with seaweed added were less calorie-dense and had lower SFAs levels, while samples with olive oil had higher MUFAs levels.

  11. Preschool iron-folic acid and zinc supplementation in children exposed to iron-folic acid in utero confers no added cognitive benefit in early school-age.

    PubMed

    Christian, Parul; Morgan, Mary E; Murray-Kolb, Laura; LeClerq, Steven C; Khatry, Subarna K; Schaefer, Barbara; Cole, Pamela M; Katz, Joanne; Tielsch, James M

    2011-11-01

    In Nepal, antenatal iron-folic acid supplementation improved aspects of intellectual, executive, and fine motor function among school-age children. We examined the impact of added zinc to the maternal antenatal supplement (M-IFAZn) and preschool supplementation from 12 to 36 mo with iron-folic acid (C-IFA) ± zinc (C-IFAZn) on cognitive outcomes compared to maternal iron-folic acid (M-IFA) alone. Children 7-9 y old (n = 780) who participated in early childhood micronutrient supplementation trial during 2001-2004 and whose mothers participated in an antenatal micronutrient supplementation between 1999 and 2001 were followed for cognitive assessments in 2007-2009. Using multivariate analysis of variance and adjusting for confounders, M-IFA with child supplementation (either C-IFA or C-IFAZn) did not impact scores on the tests of general intelligence (Universal Nonverbal Intelligence Test), and executive function (Stroop and go/no go tests) relative to the M-IFA alone. However, children in the C-IFAZn group had slightly lower scores on the backward digit span (-0.29, 95% CI: -0.55, -0.04) and Movement Assessment Battery for Children (1.33, 95% CI: 0.26, 2.40) relative to the referent group, whereas both C-IFA (-1.92, 95% CI: -3.12, -0.71) and C-IFAZn (-1.78, 95% CI: -2.63, -0.92) produced somewhat lower finger tapping test scores (fine motor skills). The combination of M-IFAZn and C-IFA or C-IFAZn did not lead to any outcome differences relative to M-IFA alone. Preschool iron-folic acid ± zinc to children exposed to iron-folic acid in utero or addition of zinc to maternal iron-folic acid conferred no additional benefit to cognitive outcomes assessed in early school age. The late timing of supplementation during preschool may explain the lack of impact of iron and/or zinc.

  12. Adding silver and copper to hydrogen peroxide and peracetic acid in the disinfection of an advanced primary treatment effluent.

    PubMed

    Orta De Velásquez, M T; Yáñez-Noguez, I; Jiménez-Cisneros, B; Luna Pabello, V M

    2008-11-01

    This paper evaluates the efficacy of hydrogen peroxide (HP) and peracetic acid (PAA) in the disinfection of an Advanced Primary Treatment (APT) effluent, and how said disinfection capacities can be enhanced by combining the oxidants with copper (Cu2+) and silver (Ag). The treatment sequence consisted of APT (adding chemicals to water to remove suspended solids by coagulation and flocculation), followed by disinfection with various doses of HP, HP+Cu2+, HP+Ag, PAA and PAA+Ag. Microbiological quality was determined by monitoring concentrations of fecal coliforms (FC), pathogenic bacteria (PB) and helminth eggs (HE) throughout the sequence. The results revealed that APT effluent still contains very high levels of bacteria as the treatment only removes 1-2 log of FC and PB, but the reduction in the number of viable helminth eggs was 83%. Subsequent disinfection stages demonstrated that both HP+Cu2+ and HP+Ag have a marked disinfection capacity for bacteria (3.9 and 3.4 log-inactivation, respectively). Peracetic acid on its own was already extremely efficient at disinfecting for bacteria, and the effect was enhanced when combining PAA with silver (PAA+Ag). The best result for HE removal was achieved by combining PAA with silver (PAA+Ag) at doses of 20 + 2.0 mg l(-1), respectively. The study concluded that the PAA+Ag and HP+Ag combinations were good alternatives for APT effluent disinfection, because the disinfected effluents met the standards in NOM-001-SEMARNAT-1996, Mexico's regulation governing the microbiological quality required in treated wastewater destined for unrestricted reuse in agricultural irrigation (< or =1 helminths per litre). Combining either of these disinfection treatments with a primary method such as APT, therefore, offers an effective and practical way of reducing the health risks normally associated with the reuse of wastewaters.

  13. New dithiolopyrrolone antibiotics induced by adding sorbic acid to the culture medium of Saccharothrix algeriensis NRRL B-24137.

    PubMed

    Merrouche, Rabiâa; Bouras, Noureddine; Coppel, Yannick; Mathieu, Florence; Sabaou, Nasserdine; Lebrihi, Ahmed

    2011-05-01

    Dithiolopyrrolone antibiotics, produced by several microorganisms, are known for their strong antimicrobial activities. This class of antibiotics generated new interest after the discovery of their anticancer and antitumor properties. In this study, four new antibiotics were purified from the fermentation broth of Saccharothrix algeriensis NRRL B-24137 and characterized as dithiolopyrrolone derivatives. These new dithiolopyrrolone antibiotics were induced by adding sorbic acid, as precursor, at a concentration of 5 mM to the semi-synthetic medium. The analysis of the induced antibiotics was carried out by HPLC. The maximal production of the antibiotics PR2, PR8, PR9 and PR10 was 0.08±0.04, 0.21±0.04, 0.13±0.03 and 0.09±0.00 mg L(-1) , respectively, obtained after 8 days of fermentation. The chemical structures of these antibiotics were determined by (1) H- and (13) C-nuclear magnetic resonance, mass and UV-visible data. The four new dithiolopyrrolone antibiotics - PR2, PR8, PR9 and PR10 - were characterized, respectively, as crotonyl-pyrrothine, sorbyl-pyrrothine, 2-hexonyl-pyrrothine and 2-methyl-3-pentenyl-pyrrothine. The minimum inhibitory concentrations of the new induced antibiotics were determined.

  14. Microbial production of low molecular weight hyaluronic acid by adding hydrogen peroxide and ascorbate in batch culture of Streptococcus zooepidemicus.

    PubMed

    Liu, Long; Du, Guocheng; Chen, Jian; Zhu, Yang; Wang, Miao; Sun, Jun

    2009-01-01

    Microbial production of low molecular weight hyaluronic acid (HA) by the addition of hydrogen peroxide and ascorbate during the batch culture of Streptococcus zooepidemicus was investigated. Hydrogen peroxide (1.0 mmol/g HA) and ascorbate (0.5 mmol/g HA) were added at 8h and 12h to degrade HA. With the redox depolymerization of HA, the HA molecular weight decreased from 1,300 kDa for the control to 80 kDa, and the average broth viscosity during 8-16 h decreased from 360 mPa s for the control to 290 mPa s. The average oxygen mass transfer coefficient K(L)a increased from 10h(-1) for the control to 35 h(-1) and the average dissolved oxygen level increased from 1% of air saturation in the control to 10%. HA production increased from 5.0 g/L for the control to 6.5 g/L, and contributed to the increased redox potential and energy charge. This novel process not only significantly enhanced production of low molecular weight HA, but also improved purification efficiency due to a decreased broth viscosity. Low molecular weight HA finds applications in biomedical and healthcare fields.

  15. Effects of adding liquid DL-methionine hydroxy analogue-free acid to drinking water on growth performance and small intestinal morphology of nursery pigs.

    PubMed

    Kaewtapee, C; Krutthai, N; Poosuwan, K; Poeikhampha, T; Koonawootrittriron, S; Bunchasak, C

    2010-06-01

    This study was conducted to evaluate the effect of adding liquid DL-methionine hydroxy analogue free acid (LMA) to drinking water on growth performance, small intestinal morphology and volatile fatty acids in the caecum of nursery pigs. Twenty-four crossbred pigs (Large White x Landrace, BW approximately 18 kg) were divided into three groups with four replications of two piglets each. The piglets received drinking water without (control), with 0.05 or 0.10% LMA. The results indicated that adding LMA at 0.10% to drinking water significantly increased their weight gain, average daily feed intake (p < 0.05) and tended to improve the feed conversion ratio. Adding LMA to drinking water significantly increased their water intake and significantly reduced the pH of drinking water (p < 0.01), thus total plate count (p < 0.01) and Escherichia coli in drinking water was reduced (p < 0.05), while the total number of bacteria in the caecum was not significantly affected. Liquid DL-methionine hydroxy analogue free acid supplementation in drinking water tended to decrease pH in the stomach, duodenum, jejunum, colon and rectum. Furthermore, adding LMA at 0.10% significantly increased villous height in the duodenum, jejunum and ileum (p < 0.05), and the villous height:crypt depth ratio in the jejunum and ileum (p < 0.01) was higher, whereas acetic acid concentration in the caecum was significantly lower than in the control group. It could be concluded that adding LMA to drinking water improved growth performance of the nursery pigs because of high water quality and high nutrient utilization caused by an improvement of small intestinal morphology (not from nutritional effect of methionine source).

  16. Antioxidant activity of phenolic compounds added to a functional emulsion containing omega-3 fatty acids and plant sterol esters.

    PubMed

    Espinosa, Raquel Rainho; Inchingolo, Raffaella; Alencar, Severino Matias; Rodriguez-Estrada, Maria Teresa; Castro, Inar Alves

    2015-09-01

    The effect of eleven compounds extracted from red propolis on the oxidative stability of a functional emulsion was evaluated. Emulsions prepared with Echium oil as omega 3 (ω-3 FA) source, containing 1.63 g/100mL of α-linolenic acid (ALA), 0.73 g/100 mL of stearidonic acid (SDA) and 0.65 g/100mL of plant sterol esters (PSE) were prepared without or with phenolic compounds (vanillic acid, caffeic acid, trans-cinnamic acid, 2,4-dihydroxycinnamic acid, p-coumaric acid, quercetin, trans-ferulic acid, trans,trans-farnesol, rutin, gallic acid or sinapic acid). tert-Butylhydroquinone and a mixture containing ascorbic acid and FeSO4 were applied as negative and positive controls of the oxidation. Hydroperoxide, thiobarbituric acid reactive substances (TBARS), malondialdehyde and phytosterol oxidation products (POPs) were evaluated as oxidative markers. Based on hydroperoxide and TBARS analysis, sinapic acid and rutin (200 ppm) showed the same antioxidant activity than TBHQ, representing a potential alternative as natural antioxidant to be applied in a functional emulsion containing ω-3 FA and PSE.

  17. Adsorption of organic acids on TiO2 nanoparticles: effects of pH, nanoparticle size, and nanoparticle aggregation.

    PubMed

    Pettibone, John M; Cwiertny, David M; Scherer, Michelle; Grassian, Vicki H

    2008-06-01

    In this study, the adsorption of two organic acids, oxalic acid and adipic acid, on TiO2 nanoparticles was investigated at room temperature, 298 K. Solution-phase measurements were used to quantify the extent and reversibility of oxalic acid and adipic acid adsorption on anatase nanoparticles with primary particle sizes of 5 and 32 nm. At all pH values considered, there were minimal differences in measured Langmuir adsorption constants, K ads, or surface-area-normalized maximum adsorbate-surface coverages, Gamma max, between 5 and 32 nm particles. Although macroscopic differences in the reactivity of these organic acids as a function of nanoparticle size were not observed, ATR-FTIR spectroscopy showed some distinct differences in the absorption bands present for oxalic acid adsorbed on 5 nm particles compared to 32 nm particles, suggesting different adsorption sites or a different distribution of adsorption sites for oxalic acid on the 5 nm particles. These results illustrate that molecular-level differences in nanoparticle reactivity can still exist even when macroscopic differences are not observed from solution phase measurements. Our results also allowed the impact of nanoparticle aggregation on acid uptake to be assessed. It is clear that particle aggregation occurs at all pH values and that organic acids can destabilize nanoparticle suspensions. Furthermore, 5 nm particles can form larger aggregates compared to 32 nm particles under the same conditions of pH and solid concentrations. The relative reactivity of 5 and 32 nm particles as determined from Langmuir adsorption parameters did not appear to vary greatly despite differences that occur in nanoparticle aggregation for these two different size nanoparticles. Although this potentially suggests that aggregation does not impact organic acid uptake on anatase particles, these data clearly show that challenges remain in assessing the available surface area for adsorption in nanoparticle aqueous suspensions

  18. [Levels of phthalates and adipates in processed foods and migration of di-isononyl adipate from polyvinyl chloride film into foods].

    PubMed

    Saito, Isao; Ueno, Eiji; Oshima, Harumi; Matsumoto, Hiroshi

    2002-06-01

    The levels of dibutyl phthalate (DBP), butylbenzyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEPHP), di-isononyl phthalate (DINP), di-(2-ethylhexyl) adipate (DEHA) and di-isononyl adipate (DINA) were determined in 50 processed foods (ham and sausage, fried dumpling and shao-mai, fish paste products, croquette and fried fish, bread, noodle, pickles, etc.). DBP, BBP, DEHP, DINP, DEHA, and DINA were contained at nd approximately 47.7, nd approximately 16.6, nd approximately 749, nd approximately 358, nd approximately 57.2 and nd approximately 20,200 ppb, respectively. High-level contamination of DINA was found in fish paste products, croquette and shao-mai, presumably because of migration from plasticized wrapping film using for food packaging. We studied the relationship between DINA migration from wrapped PVC film into fried croquette and its standing time after frying. When the croquette was wrapped immediately after frying, the migration from wrapping film into the croquette was highest (36,400 ng/g). On wrapping after standing for 5 min and 30 min, the migration level was reduced to 1/3.5 and 1/14 of the highest level, respectively.

  19. Effects of a dietary ketone ester on hippocampal glycolytic and TCA cycle intermediates and amino acids in a 3xTgAD mouse model of Alzheimer's disease.

    PubMed

    Pawlosky, Robert J; Kemper, Martin F; Kashiwaya, Yoshihero; King, M Todd; Mattson, Mark P; Veech, Richard L

    2017-01-18

    In patients with Alzheimer's disease (AD) and in a triple transgenic (3xTgAD) mouse model of AD low glucose metabolism in the brain precedes loss of memory and cognitive decline. The metabolism of ketones in the brain by-passes glycolysis and therefore may correct several deficiencies that are associated with glucose hypometabolism. A dietary supplement composed of an ester of D-β-hydroxybutyrate and R-1,3 butane diol referred to as ketone ester (KE) was incorporated into a rodent diet and fed to 3xTgAD mice for 8 months. At 16.5 months of age animals were euthanized and brains dissected. Analyses were carried out on the hippocampus and frontal cortex for glycolytic and TCA (Tricarboxylic Acid) cycle intermediates, amino acids, oxidized lipids and proteins, and enzymes. There were higher concentrations of D-β-hydroxybutyrate in the hippocampus of KE-fed mice where there were also higher concentrations of TCA cycle and glycolytic intermediates and the energy-linked biomarker, n-acetyl aspartate compared to controls. In the hippocampi of control-fed animals the free mitochondrial [NAD(+) ]/[NADH] ratio were highly oxidized, whereas, in KE-fed animals the mitochondria were reduced. Also, the levels of oxidized protein and lipids were lower and the energy of ATP hydrolysis was greater compared to controls. 3xTgAD mice maintained on a KE-supplemented diet had higher concentrations of glycolytic and TCA cycle metabolites, a more reduced mitochondrial redox potential, and lower amounts of oxidized lipids and proteins in their hippocampi compared to controls. The KE offers a potential therapy to counter fundamental metabolic deficits common to patients and transgenic models. This article is protected by copyright. All rights reserved.

  20. Generation of Bioactive Oxylipins from Exogenously Added Arachidonic, Eicosapentaenoic and Docosahexaenoic Acid in Primary Human Brain Microvessel Endothelial Cells.

    PubMed

    Aukema, Harold M; Winter, Tanja; Ravandi, Amir; Dalvi, Siddhartha; Miller, Donald W; Hatch, Grant M

    2016-05-01

    The human blood-brain barrier (BBB) is the restrictive barrier between the brain parenchyma and the circulating blood and is formed in part by microvessel endothelial cells. The brain contains significant amounts of arachidonic acid (ARA), and docosahexaenoic acid (DHA), which potentially give rise to the generation of bioactive oxylipins. Oxylipins are oxygenated fatty acid metabolites that are involved in an assortment of biological functions regulating neurological health and disease. Since it is not known which oxylipins are generated by human brain microvessel endothelial cells (HBMECs), they were incubated for up to 30 min in the absence or presence of 0.1-mM ARA, eicosapentaenoic acid (EPA) or DHA bound to albumin (1:1 molar ratio), and the oxylipins generated were examined using high performance liquid chromatography-tandem mass spectrometry (HPLC/MS/MS). Of 135 oxylipins screened in the media, 63 were present at >0.1 ng/mL at baseline, and 95 were present after incubation with fatty acid. Oxylipins were rapidly generated and reached maximum levels by 2-5 min. While ARA, EPA and DHA each stimulated the production of oxylipins derived from these fatty acids themselves, ARA also stimulated the production of oxylipins from endogenous 18- and 20-carbon fatty acids, including α-linolenic acid. Oxylipins generated by the lipoxygenase pathway predominated both in resting and stimulated states. Oxylipins formed via the cytochrome P450 pathway were formed primarily from DHA and EPA, but not ARA. These data indicate that HBMECs are capable of generating a plethora of bioactive lipids that have the potential to modulate BBB endothelial cell function.

  1. Hairy AdS solitons

    NASA Astrophysics Data System (ADS)

    Anabalón, Andrés; Astefanesei, Dumitru; Choque, David

    2016-11-01

    We construct exact hairy AdS soliton solutions in Einstein-dilaton gravity theory. We examine their thermodynamic properties and discuss the role of these solutions for the existence of first order phase transitions for hairy black holes. The negative energy density associated to hairy AdS solitons can be interpreted as the Casimir energy that is generated in the dual filed theory when the fermions are antiperiodic on the compact coordinate.

  2. Production of a value added compound from the H-acid waste water-Bioflocculants by Klebsiella pneumoniae.

    PubMed

    Zhong, Chunying; Xu, Aihua; Wang, Buyun; Yang, Xianghui; Hong, Wentao; Yang, Baokun; Chen, Changhong; Liu, Hongtao; Zhou, Jiangang

    2014-10-01

    A novel strain (designated as ZCY-7) which could convert H-acid into bioflocculants was isolated from H-acid wastewater sludge. Conditions for bioflocculants production were optimized by response surface methodology (RSM) and determined to be inoculum size 9.65%, initial pH 7.0, and CODCr of the H-acid wastewater 520mg/L. The highest flocculating efficiency achieved for kaolin suspension was 95.1%, after 60h cultivation. The yielded bioflocculant was mainly composed of polysaccharide (82.4%) and protein (14.2%), and maintained its flocculating activity in 0.4% (w/w) kaolin suspensions over pH 2-8 and 20-80°C. Fourier transform infrared (FTIR) spectra showed that amino, amide and hydroxyl groups were present in the bioflocculant molecules. A viable alternative treatment technology of H-acid wastewater using this novel strain is suggested, which could largely reduce bioflocculants costs. In addition, flocculating mechanism investigation reveals that the bioflocculant could cause kaolin suspension instability by means of charge neutralization firstly and then promoted the aggregation of suspension particles by adsorption and bridge. It is evident from the results that H-acid wastewater could be used as a source to manufacture bioflocculants.

  3. Production of a value-added hydroxy fatty acid, 7,10-dihydroxy-8(E)-octadecenoic acid from high oleic safflower oil by Pseudomonas aeruginosa PR3

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Hydroxy fatty acids (HFA), originally found in small amount mainly from plant systems, are good examples of the structurally modified lipids, rendering special properties such as higher viscosity and reactivity compared to normal fatty acids. Based on these properties, HFAs possess high industrial ...

  4. Multifunctional Nanobiocomposite of Poly[(butylene succinate)-co-adipate] and Clay.

    PubMed

    Al-Thabaiti, Shaeel A; Ray, Suprakas Sinha; Basahel, Sulaiman Nassir; Mokhtar, Mohamed

    2015-03-01

    The processing and characterization of multifunctional nanobiocomposite of biodegradable poly[(butylene succinate)-co-adipate] (PBSA) and organically modified synthetic fluorine mica (OSFM) are reported. The nanobiocomposite of PBSA with OSFM was prepared using melt- blending, and the structure and morphology of the nanocomposite were characterized using X-ray diffraction and transmission electron microscopy. The mechanical and material properties measurements showed the concurrent improvement in temperature dependence storage modulus, tensile properties, gas barrier, and thermal stability of neat PBSA after nanocomposite formation. Such improved inherent properties along with the environmentally-friendly feature are expected to widen the use of PBSA for short-term food-packaging applications.

  5. Clearing the fog: a review of the effects of dietary omega-3 fatty acids and added sugars on chemotherapy-induced cognitive deficits.

    PubMed

    Orchard, Tonya S; Gaudier-Diaz, Monica M; Weinhold, Kellie R; Courtney DeVries, A

    2017-02-01

    Cancer treatments such as chemotherapy have been an important part of extending survival in women diagnosed with breast cancer. However, chemotherapy can cause potentially toxic side effects in the brain that impair memory, verbal fluency, and processing speed in up to 30% of women treated. Women report that post-chemotherapy cognitive deficits negatively impact quality of life and may last up to ten years after treatment. Mechanisms underlying these cognitive impairments are not fully understood, but emerging evidence suggests that chemotherapy induces structural changes in the brain, produces neuroinflammation, and reduces adult hippocampal neurogenesis. Dietary approaches that modify inflammation and neurogenesis are promising strategies for reducing chemotherapy-induced cognitive deficits in breast cancer survivors. In this review, we describe the cognitive and neuronal side effects associated with commonly used chemotherapy treatments for breast cancer, and we focus on the often opposing actions of omega-3 fatty acids and added sugars on cognitive function, neuroinflammation, and adult hippocampal neurogenesis. Omega-3 fatty acids administered concurrently with doxorubicin chemotherapy have been shown to prevent depressive-like behaviors and reduce neuroinflammation, oxidative stress, and neural apoptosis in rodent models. In contrast, diets high in added sugars may interact with n-3 FAs to diminish their anti-inflammatory activity or act independently to increase neuroinflammation, reduce adult hippocampal neurogenesis, and promote cognitive deficits. We propose that a diet rich in long-chain, marine-derived omega-3 fatty acids and low in added sugars may be an ideal pattern for preventing or alleviating neuroinflammation and oxidative stress, thereby protecting neurons from the toxic effects of chemotherapy. Research testing this hypothesis could lead to the identification of modifiable dietary choices to reduce the long-term impact of chemotherapy on the

  6. Bacterial and protozoal communities and fatty acid profile in the rumen of sheep fed a diet containing added tannins.

    PubMed

    Vasta, Valentina; Yáñez-Ruiz, David R; Mele, Marcello; Serra, Andrea; Luciano, Giuseppe; Lanza, Massimiliano; Biondi, Luisa; Priolo, Alessandro

    2010-04-01

    This study evaluated the effects of tannins on ruminal biohydrogenation (BH) due to shifts in the ruminal microbial environment in sheep. Thirteen lambs (45 days of age) were assigned to two dietary treatments: seven lambs were fed a barley-based concentrate (control group) while the other six lambs received the same concentrate with supplemental quebracho tannins (9.57% of dry matter). At 122 days of age, the lambs were slaughtered, and the ruminal contents were subjected to fatty acid analysis and sampled to quantify populations of Butyrivibrio fibrisolvens, which converts C(18:2) c9-c12 (linoleic acid [LA]) to C(18:2) c9-t11 (rumenic acid [RA]) and then RA to C(18:1) t11 (vaccenic acid [VA]); we also sampled for Butyrivibrio proteoclasticus, which converts VA to C(18:0) (stearic acid [SA]). Tannins increased (P < 0.005) VA in the rumen compared to the tannin-free diet. The concentration of SA was not affected by tannins. The SA/VA ratio was lower (P < 0.005) for the tannin-fed lambs than for the controls, suggesting that the last step of the BH process was inhibited by tannins. The B. proteoclasticus population was lower (-30.6%; P < 0.1), and B. fibrisolvens and protozoan populations were higher (+107% and +56.1%, respectively; P < 0.05) in the rumen of lambs fed the tannin-supplemented diet than in controls. These results suggest that quebracho tannins altered BH by changing ruminal microbial populations.

  7. Added Sugars

    MedlinePlus

    ... need sugar to function properly. Added sugars contribute zero nutrients but many added calories that can lead to extra pounds or even obesity, thereby reducing heart health. If you think of your daily calorie needs as a budget, you want to “spend” ...

  8. Value Added?

    ERIC Educational Resources Information Center

    UCLA IDEA, 2012

    2012-01-01

    Value added measures (VAM) uses changes in student test scores to determine how much "value" an individual teacher has "added" to student growth during the school year. Some policymakers, school districts, and educational advocates have applauded VAM as a straightforward measure of teacher effectiveness: the better a teacher,…

  9. Increased brain uptake of targeted nanoparticles by adding an acid-cleavable linkage between transferrin and the nanoparticle core.

    PubMed

    Clark, Andrew J; Davis, Mark E

    2015-10-06

    Most therapeutic agents are excluded from entering the central nervous system by the blood-brain barrier (BBB). Receptor mediated transcytosis (RMT) is a common mechanism used by proteins, including transferrin (Tf), to traverse the BBB. Here, we prepared Tf-containing, 80-nm gold nanoparticles with an acid-cleavable linkage between the Tf and the nanoparticle core to facilitate nanoparticle RMT across the BBB. These nanoparticles are designed to bind to Tf receptors (TfRs) with high avidity on the blood side of the BBB, but separate from their multidentate Tf-TfR interactions upon acidification during the transcytosis process to allow release of the nanoparticle into the brain. These targeted nanoparticles show increased ability to cross an in vitro model of the BBB and, most important, enter the brain parenchyma of mice in greater amounts in vivo after systemic administration compared with similar high-avidity nanoparticles containing noncleavable Tf. In addition, we investigated this design with nanoparticles containing high-affinity antibodies (Abs) to TfR. With the Abs, the addition of the acid-cleavable linkage provided no improvement to in vivo brain uptake for Ab-containing nanoparticles, and overall brain uptake was decreased for all Ab-containing nanoparticles compared with Tf-containing ones. These results are consistent with recent reports of high-affinity anti-TfR Abs trafficking to the lysosome within BBB endothelium. In contrast, high-avidity, Tf-containing nanoparticles with the acid-cleavable linkage avoid major endothelium retention by shedding surface Tf during their transcytosis.

  10. Thermal and mechanical properties of polylactic acid (PLA) and bagasse carboxymethyl cellulose (CMCB) composite by adding isosorbide diesters

    NASA Astrophysics Data System (ADS)

    Kamthai, Suthaphat; Magaraphan, Rathanawan

    2015-05-01

    An isosorbide diesters is one of isororbide types used as a plasticizer. The influence of this plasticizer on thermal and mechanical properties of polylactic acid and bagasse carboxymethyl cellulose (PLA/CMCB) composites was studied. PLA was blended with CMCB at 1%wt using various contents of isosorbide diesters (5, 10, 15 and 20%wt of PLA). The differential scanning calorimetric (DSC) and thermogravimetric (TGA) analyses indicated that the increment of isosorbide diesters concentration resulted in decreasing glass transition, melting and decomposition temperatures, as well as the reduction of storage modulus of PLA/CMCB composites. Moreover, the elongation of PLA/CMCB composites was significantly improved with increasing plasticizer content.

  11. Assessment of methods for amino acid matrix selection and their use on empirical data shows that ad hoc assumptions for choice of matrix are not justified

    PubMed Central

    Keane, Thomas M; Creevey, Christopher J; Pentony, Melissa M; Naughton, Thomas J; Mclnerney, James O

    2006-01-01

    Background In recent years, model based approaches such as maximum likelihood have become the methods of choice for constructing phylogenies. A number of authors have shown the importance of using adequate substitution models in order to produce accurate phylogenies. In the past, many empirical models of amino acid substitution have been derived using a variety of different methods and protein datasets. These matrices are normally used as surrogates, rather than deriving the maximum likelihood model from the dataset being examined. With few exceptions, selection between alternative matrices has been carried out in an ad hoc manner. Results We start by highlighting the potential dangers of arbitrarily choosing protein models by demonstrating an empirical example where a single alignment can produce two topologically different and strongly supported phylogenies using two different arbitrarily-chosen amino acid substitution models. We demonstrate that in simple simulations, statistical methods of model selection are indeed robust and likely to be useful for protein model selection. We have investigated patterns of amino acid substitution among homologous sequences from the three Domains of life and our results show that no single amino acid matrix is optimal for any of the datasets. Perhaps most interestingly, we demonstrate that for two large datasets derived from the proteobacteria and archaea, one of the most favored models in both datasets is a model that was originally derived from retroviral Pol proteins. Conclusion This demonstrates that choosing protein models based on their source or method of construction may not be appropriate. PMID:16563161

  12. Omega 3 fatty acids induce a marked reduction of apolipoprotein B48 when added to fluvastatin in patients with type 2 diabetes and mixed hyperlipidemia: a preliminary report

    PubMed Central

    Valdivielso, Pedro; Rioja, José; García-Arias, Carlota; Sánchez-Chaparro, Miguel Angel; González-Santos, Pedro

    2009-01-01

    Backgorund Mixed hyperlipidemia is common in patients with diabetes. Statins, the choice drugs, are effective at reducing lipoproteins that contain apolipoprotein B100, but they fail to exert good control over intestinal lipoproteins, which have an atherogenic potential. We describe the effect of prescription omega 3 fatty acids on the intestinal lipoproteins in patients with type 2 diabetes who were already receiving fluvastatin 80 mg per day. Methods Patients with type 2 diabetes and mixed hyperlipidemia were recruited. Fasting lipid profile was taken when patients were treated with diet, diet plus 80 mg of fluvastatin and diet plus fluvastatin 80 mg and 4 g of prescription omega 3 fatty acids. The intestinal lipoproteins were quantified by the fasting concentration of apolipoprotein B48 using a commercial ELISA. Results The addition of 4 g of prescription omega 3 was followed by significant reductions in the levels of triglycerides, VLDL triglycerides and the triglyceride/HDL cholesterol ratio, and an increase in HDL cholesterol (P < 0.05). Fluvastatin induced a reduction of 26% in B100 (P < 0.05) and 14% in B48 (NS). However, the addition of omega 3 fatty acids enhanced this reduction to 32% in B100 (NS) and up to 36% in B48 (P < 0.05). Conclusion Our preliminary findings therefore suggest an additional benefit on postprandial atherogenic particles when omega 3 fatty acids are added to standard treatment with fluvastatin. PMID:19133114

  13. The electrooxidation mechanism of formic acid on platinum and on lead ad-atoms modified platinum studied with the kinetic isotope effect

    NASA Astrophysics Data System (ADS)

    Bełtowska-Brzezinska, M.; Łuczak, T.; Stelmach, J.; Holze, R.

    2014-04-01

    Kinetics and mechanism of formic acid (FA) oxidation on platinum and upd-lead ad-atoms modified platinum electrodes have been studied using unlabelled and deuterated compounds. Poisoning of the electrode surface by CO-like species was prevented by suppression of dissociative chemisorption of FA due to a fast competitive underpotential deposition of lead ad-atoms on the Pt surface from an acidic solution containing Pb2+ cations. Modification of the Pt electrode with upd lead induced a catalytic effect in the direct electrooxidation of physisorbed FA to CO2. With increasing degree of H/D substitution, the rate of this reaction decreased in the order: HCOOH > DCOOH ≥ HCOOD > DCOOD. HCOOH was oxidized 8.5-times faster on a Pt/Pb electrode than DCOOD. This primary kinetic isotope effect proves that the C-H- and O-H-bonds are simultaneously cleaved in the rate determining step. A secondary kinetic isotope effect was found in the dissociative chemisorption of FA in the hydrogen adsorption-desorption range on a bare Pt electrode after H/D exchange in the C-H bond, wherein the influence of deuterium substitution in the O-H group was negligibly small. Thus the C-H bond cleavage is accompanied by the C-OH and not the O-H bond split in the FA decomposition, producing CO-like species on the Pt surface sites.

  14. Acetylated adipate of retrograded starch as RS 3/4 type resistant starch.

    PubMed

    Kapelko-Żeberska, M; Zięba, T; Spychaj, R; Gryszkin, A

    2015-12-01

    This study was aimed at producing acetylated adipate of retrograded starch (ADA-R) with various degrees of substitution with functional groups and at determining the effect of esterification degree on resistance and pasting characteristics of the produced preparations. Paste was prepared from native potato starch, and afterwards frozen and defrosted. After drying and disintegration, the paste was acetylated and crosslinked using various doses of reagents. An increase in the total degree of esterification of the produced ADA-R-preparation caused an increase in its resistance to the action of amyloglucosidase. Viscosity of the paste produced from ADA-R-preparation in a wide range of acetylation degrees was increasing along with increasing crosslinking of starch. The study demonstrated that acetylated adipate of retrograded starch may be classified as a preparation of RS 3/4 type resistant starch (retrograded starch/chemically-modified starch) with good texture-forming properties. The conducted modification offers the possibility of modeling the level of resistance of the produced preparation.

  15. Development and quality of a Brazilian semi-hard goat cheese (coalho) with added probiotic lactic acid bacteria.

    PubMed

    Garcia, Estefânia Fernandes; de Oliveira, Maria Elieidy Gomes; Queiroga, Rita de Cássia Ramos Do Egypto; Machado, Tamires Alcântara Dourado; de Souza, Evandro Leite

    2012-12-01

    The effects of the addition of different strains of lactic acid bacteria on different quality parameters of a Brazilian goat semi-hard cheese (coalho) were assessed during 7 days of storage (10°C) as follows: Control, Lactobacillus lactis subsp. lactis and L. lactis subsp. cremoris (standard); C2, L. acidophilus; C3, L. paracasei; C4, Bifidobacterium lactis; and C5, L. acidophilus, L. paracasei and B. lactis. There were no differences for the proteolysis index and depth of proteolysis among the assessed cheeses. The cheeses presented increase in hardness, gumminess and chewiness during the storage. Regarding the ability to melt, all evaluated cheeses showed a reduction in diameter. Cheeses presented high luminosity with predominance of the yellow component; and number of lactic bacteria greater than 10⁶-10⁷ cfu/g during the 7 days of storage. C5 had better sensory scores in the acceptance test, purchase intention and preference ranking test. Coalho goat cheese could be a potential carrier of probiotic lactic acid bacteria.

  16. Luminescence features from conical bubble collapse in 1,2 propanediol and its perturbation adding sulfuric acid

    NASA Astrophysics Data System (ADS)

    Navarrete, M.; Sanchéz, C.; Godínez, F. A.; Mejía, E. V.; Villagrán, M.

    2011-01-01

    A summary of experimental findings on the luminescence from bubble collapse, CBL, varying the gas inert bubble content, the driving pressure and perturbing the liquid piston with small quantities of sulfuric acid is presented. The temporal, spectral, and spatial characteristics of the luminescence regarding with dynamic features of collapse are also examinees. CBL was reproduced using Argon gas, and 1, 2-propanediol as liquid piston. In general, the pulse shape exhibits a large variety of profiles. The luminescence intensity was increased two-fold and the pulse width decreased almost to half when the liquid was disturbed with sulfuric acid. Spectrally, the Swan, CH and CN lines were observed at low volume of Ar gas and low driving pressure, lines of OH°, Na*, K* always appear superimposed on an underlying continuum background. De-excitation of sodium atom at 589 nm and two satellites diffuse bands at ~554 nm and ~620 nm from alkali -metal-argon exciplexes was observed in both systems under certain conditions. All these findings point towards several sources of light emission that are generated during the compression time line, resulting in temporally and spatially inhomogeneous pulse. A mechanism for explain the bright CBL is broached.

  17. Impact property enhancement of poly (lactic acid) with different flexible copolymers

    NASA Astrophysics Data System (ADS)

    Likittanaprasong, N.; Seadan, M.; Suttiruengwong, S.

    2015-07-01

    The objective of this work was to improve the impact property of Poly (lactic acid) (PLA) by blending with different copolymers. Six flexible copolymers, namely, acrylonitrile butadiene styrene (ABS) powder, Biomax, polybutyrate adipate co-terephthalate (PBAT), polyether block amide (PEBAX), ethylene-vinyl acetate (EVA) and ethylene acrylic elastomer (EAE), with loading less than 20wt% were used and compared. The rheological, mechanical and morphological properties of samples were investigated by melt flow index, tensile testing, impact testing and scanning electron microscope (SEM), respectively. It was found that PLA added 20wt% EAE showed the highest impact strength (59.5 kJ/m2), which was 22 times higher than neat PLA. The elongation at break was also increased by 12 folds compared to neat PLA. The SEM images showed good interface and distribution for PLA containing 20wt% EAE, 15 phr Biomax and 20 wt% PEBAX.

  18. Novel ketone body therapy for managing Alzheimer's disease: An Editorial Highlight for Effects of a dietary ketone ester on hippocampal glycolytic and tricarboxylic acid cycle intermediates and amino acids in a 3xTgAD mouse model of Alzheimer's disease.

    PubMed

    Puchowicz, Michelle A; Seyfried, Thomas N

    2017-03-15

    Read the highlighted article 'Effects of a dietary ketone ester on hippocampal glycolytic and tricarboxylic acid cycle intermediates and amino acids in a 3xTgAD mouse model of Alzheimer's disease' on doi: 10.1111/jnc.13958.

  19. Adding zinc to supplemental iron and folic acid does not affect mortality and severe morbidity in young children.

    PubMed

    Bhandari, Nita; Taneja, Sunita; Mazumder, Sarmila; Bahl, Rajiv; Fontaine, Olivier; Bhan, Maharaj K

    2007-01-01

    Studies have found a substantial reduction in diarrhea and respiratory morbidity in young children receiving zinc supplementation. The impact of daily zinc supplementation administered with iron plus folic acid (IFA) in young children on all-cause hospitalizations and mortality in comparison with IFA alone was evaluated. In a double blind cluster-randomized controlled trial, 94,359 subjects aged 1-23 mo were administered a daily dose of zinc plus IFA or IFA alone for a duration of 12 mo after enrollment. The intervention group tablet contained 10 mg of elemental zinc, 12.5 mg of iron, and 50 microg of folic acid. The control group tablets were similar except that they contained a placebo for zinc. Infants aged <6 mo were administered half a tablet, and those older received 1 tablet dissolved in breast milk or water. Hospitalizations were captured by trained study physicians through the surveillance of 8 hospitals. Deaths and hospitalizations were ascertained through visits to households by study supervisors once every 2 mo. The overall death rates did not differ significantly between the 2 groups when adjusted for cluster randomization (hazard ratio = 1.02, 95% CI 0.87, 1.19). Zinc and IFA supplementation compared with IFA alone did not affect adjusted hospitalization rates (overall rate ratio = 1.08, 95% CI 0.98, 1.19; diarrhea-specific rate ratio = 1.15, 95% CI 0.99, 1.34; or pneumonia-specific rate ratio = 1.09, 95% CI 0.94, 1.25). The lack of impact of zinc on mortality and hospitalization rates in this study may have been due to the use of lower daily zinc dosing than used in some of the morbidity prevention trials or from an interaction between zinc and iron, where the addition of iron may have adversely affected potential effects of zinc on immune function and morbidity. Future research should address iron and zinc interaction effects on important functional outcomes.

  20. Effects of the storage time on the folic acid added to ready-to-eat meat products manufactured by irradiation

    NASA Astrophysics Data System (ADS)

    Galán, I.; García, M. L.; Selgas, M. D.

    2013-04-01

    Three different meat products enriched with folic acid (FA) (2.4 mg/100 g) were manufactured: hamburgers, cooked and dry fermented sausages. They were prepared as ready-to-eat (RTE) products using E-beam radiation (2 and 3 kGy) to ensure their safety. The stability of FA and sensory properties of the irradiated meat products were studied during three months of storage under freezing conditions for hamburgers and refrigeration conditions for cooked and dry fermented sausages. FA content was stable in non-irradiated and irradiated hamburgers and cooked sausages over the storage period, whereas it decreased 20% in non-irradiated dry fermented sausages and 12-8% in irradiated samples at 2 and 3 kGy, respectively. Nevertheless, the final amount remained sufficient to provide the recommended daily intake. Panelists rated the sensory properties of the hamburger as satisfactory even after irradiation and 90 days of storage. The overall acceptability of RTE cooked and dry fermented sausages improved slightly with storage (P>0.05).

  1. Synthesis of no carrier added F-18 16-fluorohexadecanoic acid (FHDA) and investigation of its labeled metabolites and its kinetics in the heart

    SciTech Connect

    DeGrado, T.R.; Bernstein, D.R.; Gatley, S.J.; Ng, C.K.; Holden, J.E.

    1984-01-01

    No carrier added FHDA was prepared via saponification of the product of silver oxide assisted reaction of near-anhydrous tetraethylammonium fluoride with methyl 16-iodohexadecanoate. The labeled fatty acid was injected into isolated perfused rat hearts. Coronary perfusate was collected for 4-9 minutes, when hearts were chilled and homogenized. F-18 in perfusate was analysed by HPLC (NH column; 50mM amm. acetate in 50% acetonitrile). Material with the same retention time as F-18 fluoroacetate (prepared by F-for-I exchange with ethyl iodoacetate) was found. Some F-18 stuck permanently to the column and was assigned as fluoride since the same fraction of label in perfusate was retained on alumina columns eluted with water. Anion exchange HPLC (SAX column; 20mM pot. phosphate, pH 7) of homogenates gave peaks corresponding to fluoroacetate plus fluoride and minor peaks which could be fluoroacetylCoA and fluorocitrate. The authors interpret their data as follows. Beta-oxidation of FHDA results in fluoroacetylCoA which either undergoes ''lethal synthesis'' to fluorocitrate or is hydrolysed to fluoroacetate which diffuses out of the heart. The source of the fluoride is not yet clear, but could complicate interpretation of FHDA kinetics measured in vivo with positron tomography. Clearance of label from FHDA in isolated perfused hearts was faster than for labeled 16-iodohexadecanoic acid, indicating that the F-18 tracer may be a more sensitive probe of myocardial fatty acid metabolism.

  2. Properties of cholesterol-reduced butter made with beta-cyclodextrin and added evening primrose oil and phytosterols.

    PubMed

    Kim, J J; Jung, T H; Ahn, J; Kwak, H S

    2006-12-01

    The present study was carried out to examine changes in the chemical and sensory properties of butter in which the cholesterol was reduced and to which evening primrose oil (EPO) and phytosterols were added. Crosslinked beta-cyclodextrin (beta-CD) made from adipic acid was used, and approximately 90% of the cholesterol was removed. The color measurement values "L" and "a" were significantly different between the control (butter with no beta-CD treatment and no added EPO and phytosterols) and treatment A (butter treated with 10% crosslinked beta-CD); however, the color values for "L" and "a" were similar. The color value "b" in treatment B (butter treated with 10% crosslinked beta-CD and 5% phytosterols and 3% EPO added) was significantly higher than in the other treatments. The thiobarbituric acid value of treatment B was significantly higher than that of the control and treatment A. Scores for hardness, elasticity, and cohesiveness were significantly lower in the control than in treatment A. Differences in sensory characteristics did not result from the beta-CD treatment but from the addition of EPO and phytosterols. In microscopic examinations, no noticeable differences were found among the treatments, and a smooth texture and a fine, uniform crystalline structure were observed. Results indicated that about 90% of the cholesterol was reduced by crosslinked beta-CD and that the beta-CD treatment itself did not adversely influence the chemical and sensory properties of the butter. However, the addition of EPO and phytosterols to the butter appeared to impair its sensory properties, especially in terms of rancidity and overall acceptability.

  3. High molecular weight β-poly(L-malic acid) produced by A. pullulans with Ca²⁺ added repeated batch culture.

    PubMed

    Cao, Weifeng; Chen, Xiangrong; Luo, Jianquan; Yin, Junxiang; Qiao, Changsheng; Wan, Yinhua

    2016-04-01

    β-Poly(malic acid) (PMLA) has attracted increasing attentions because of its potential application in medicine and other industries. In this study, the variation of PMLA molecular weight (Mw) in the batch culture and the strategies to enhance PMLA Mw were studied. Adding exogenous Ca(2+) (0.1g/L CaCl2) to the medium caused a significant increase in both PMLA concentration and Mw (11.38% and 26.3%, respectively) when Na2CO3 was used as the neutralizer. The Mw of PMLA during the process of batch culture, which associated with the specific PMLA production per unit cell mass (Yp/x) before glucose was depleted, increased from 12.522 KDa to its maximum 18.693 KDa and then kept decreasing until the end of the culture. Compared with the results in batch culture, Mw increased by 84.4% (up to 19.51 kDa) with a productivity of 1.1 gh(-1)L(-1) when the cells were maintained in exponential growth phase during Ca(2+) added repeated batch culture. The present work provides an efficient approach to obtain superior quality PMLA product with high Mw.

  4. Hepatic metabolism of glucose and linoleic acid varies in relation to susceptibility to fatty liver in ad libitum-fed Muscovy and Pekin ducks.

    PubMed

    Saez, Gladys; Baéza, Elisabeth; Davail, Stéphane; Durand, Denys; Bauchart, Dominique; Gruffat, Dominique

    2009-02-01

    The susceptibility to develop hepatic steatosis is known to differ between duck species, especially between Muscovy and Pekin ducks. This difference could be explained by either differential responses of species to overfeeding or genetic differences in hepatic lipid metabolism. The aim of the present study was to compare the intensities of the different hepatic pathways (oxidation, lipogenesis, esterification, secretion, etc.) of the two main nutrients (glucose and linoleic acid (LA)) reaching the liver of ad libitum-fed Muscovy (n 6) and Pekin (n 6) ducks using the ex vivo method of liver slices incubated for 16 h with [U-14C]glucose, [1-14C]LA and [35S]methionine added to the survival medium. In such experimental conditions, the lipogenesis pathway from glucose was 2-fold higher (P<0.05) in the liver of the Muscovy duck than in that of the Pekin duck. Furthermore, the hepatic uptake of LA was 2-fold higher (P<0.05) in the Muscovy duck than in the Pekin duck leading to a 2-fold higher (P<0.05) esterification of this fatty acid in the liver of the Muscovy duck. The hepatic secretion of VLDL was higher (P<0.01) in the Muscovy duck than in the Pekin duck but insufficient to prevent lipid accumulation in the liver of the Muscovy duck. In conclusion, these results show the influence of the species on the hepatic metabolism of ducks in relation to their susceptibility to develop fatty liver. These results should shed light on the metabolic regulations that might underlie susceptibility to hepatic steatosis in the the human liver.

  5. Adding Value.

    ERIC Educational Resources Information Center

    Orsini, Larry L.; Hudack, Lawrence R.; Zekan, Donald L.

    1999-01-01

    The value-added statement (VAS), relatively unknown in the United States, is used in financial reports by many European companies. Saint Bonaventure University (New York) has adapted a VAS to make it appropriate for not-for-profit universities by identifying stakeholder groups (students, faculty, administrators/support personnel, creditors, the…

  6. Aqueous solubility and Daphnia magna chronic toxicity of di(2-ethylhexyl) adipate.

    PubMed

    Robillard, K A; Dufresne, D L; Gorsuch, J W; Stubblefield, W A; Staples, C A; Parkerton, T F

    2008-06-01

    A water solubility of 5.5 (+/-0.22) microg/L for di(2-ethylhexyl) adipate (DEHA) was measured using the slow-stir method. This value is consistent with computer estimations and over two orders of magnitude lower than that previously determined using the shake-flask method. We performed a 21-day chronic Daphnia magna limit test at an average exposure of 4.4 microg/L in laboratory diluent water to avoid insoluble test material and avoid physical entrapment. One hundred percent of the DEHA-treated organisms survived compared to 90% survival in both the controls and solvent controls. Mean neonate reproduction was 152, 137, and 148 and mean dry weight per surviving female was 0.804, 0.779, and 0.742 mg in the DEHA treatment, control, and solvent control, respectively. No adverse effects were observed.

  7. Poly(butylene succinate-co-butylene adipate)/cellulose nanocrystal composites modified with phthalic anhydride.

    PubMed

    Zhang, Xuzhen; Zhang, Yong

    2015-12-10

    As a kind of biomass nanofiller for polymers, cellulose nanocrystal (CNC) has good mechanical properties and reinforcing capability. To improve the compatibility of poly(butylene succinate-co-butylene adipate) (PBSA)/CNC composites, phthalic anhydride was used as a compatilizer during melt mixing, leading to the significant improvement of the mechanical properties and thermal stability of the composites, which is related to the better dispersion of CNC in the composites. The addition of phthalic anhydride could accelerate the crystallization of PBSA component as evidenced by the curves of isothermal crystallization of the composites, but had little effect on the crystalline polymorphs of PBSA component. The addition of phthalic anhydride could strongly improve the hydrophobicity of the composites. The good mechanical properties, fast crystallization and improved hydrophobicity of PBSA/CNC composites with phthalic anhydride are favor to their practical commercial utilization.

  8. The influence of pressure on the photoluminescence properties of a terbium-adipate framework

    NASA Astrophysics Data System (ADS)

    Spencer, Elinor C.; Zhao, Jing; Ross, Nancy L.; Andrews, Michael B.; Surbella, Robert G.; Cahill, Christopher L.

    2013-06-01

    The influence of pressure (over the 0-4.7 GPa range) on the photoluminescence emissions and crystal structure of the known 3D terbium-adipate metal-organic framework material Tb-GWMOF6 has been evaluated by high-pressure single-crystal X-ray diffraction and spectroscopic techniques. The results from this study show that this complex lanthanide framework structure undergoes three phase transitions within the 0-4 GPa pressure range that involve alterations in the number of symmetry independent Tb3+ ion sites within the crystal lattice. These pressure induced modifications to the structure of Tb-GWMOF6 lead to pronounced changes in the profiles of the 5D4→7F5 emission spectra of this complex.

  9. Gas chromatographic-mass spectrometric determination of adipate-based polymeric plasticizers in foods.

    PubMed

    Castle, L; Mercer, A J; Gilbert, J

    1988-01-01

    A method for the quantitative determination of adipate-based polymeric plasticizers in foods is described. The procedure involves extraction from the food and transmethylation of the polymeric plasticizer to form dimethyladipate (DMA). The derivative is cleaned up by size-exclusion chromatography and determined by capillary gas chromatography-mass spectrometry with selected ion monitoring. The use of a deuterated internal standard at the extraction stage enables quantitation by stable isotope dilution. A detection limit of 0.1 mg/kg of the polymeric plasticizer in foods and a relative standard deviation of 4% have been achieved routinely. The method has been applied successfully to the analysis of cheese, sandwiches, meat, biscuits, and cake that have been in contact with polymeric plasticized poly(vinyl chloride) films.

  10. Drug incorporation and release of water soluble drugs from novel functionalized poly(glycerol adipate) nanoparticles.

    PubMed

    Puri, Sanyogita; Kallinteri, Paraskevi; Higgins, Sean; Hutcheon, Gillian A; Garnett, Martin C

    2008-01-04

    We have previously demonstrated the ability of poly(glycerol adipate) backbone (PGA) and PGA polymer backbone substituted with varying amounts of pendant C(18) chain length acyl groups to yield Dexamethasone phosphate DXMP loaded nanoparticles. The aim of this study was to obtain a deeper understanding of the underlying principles responsible for good drug incorporation and controlled release of drugs from poly (glycerol adipate) (PGA) nanoparticles. We compared the incorporation of the water soluble drugs DXMP and Cytosine arabinoside (CYT-ARA) in both unmodified and substituted PGA polymers. We investigated the effect of change in acyl group chain length and the degree of substitution on the physicochemical properties, drug loading and release of DXMP and CYT-ARA. Nanoparticles were prepared by the interfacial deposition technique and the simultaneous emulsification method. Amongst the nanoparticles prepared using acylated polymers with varying chain lengths (C(2) to C(10)) for DXMP incorporation, polymers with acyl group chain lengths containing 8 carbon atoms (C(8)) showed maximum drug incorporation. Amongst the C(8) series, polymers with 100% acylation provided both good drug incorporation and a controlled release for DXMP while for CYT-ARA it was the unsubstituted polymer backbone that had maximum drug loading and slower release. A number of inter-related factors are responsible for producing particles with particular size, zeta potential, drug loading and release characteristics. Drug loading and release from nanoparticles are primarily influenced by the nature of interactions between the drug and polymers which in turn depend upon the type of drug used and the physical chemistry of the polymer.

  11. Second virial coefficient of poly(bisphenol-A diglycidyl ether-co-adipic acid)

    NASA Astrophysics Data System (ADS)

    Wohlfarth, Ch.

    This document is part of Subvolume D2 'Polymer Solutions - Physical Properties and their Relations I (Thermodynamic Properties: PVT -Data and miscellaneous Properties of polymer Solutions) of Volume 6 `Polymers' of Landolt-Börnstein - Group VIII `Advanced Materials and Technologies'.

  12. Limestone/adipic acid FGD and stack opacity reduction pilot plant tests at Big Rivers

    SciTech Connect

    Laslo, D.; Bakke, E.; Chisholm, E.

    1984-01-01

    Big Rivers Electric Corporation (BREC) contracted Peabody Process Systems, Inc. (PPSI) to install a flue gas cleaning (FGC) pilot plant at the BREC R.D. Green Station Unit No. 2 located at Sebree, KY. A six month test program was completed demonstrating technology for: alternatives to using lime as an alkali; methods for improving cake dewatering; identification of the causes of high stack opacity; and methods for the reduction of high stack opacity. This paper presents highlights extracted from the reports submitted by PPSI to BREC on this test program. BREC was primarily interested in reduction of operating costs, if possible, by using an alkali less expensive than lime, and by improving the poor dewatering characteristic inherent in a dolomitic lime system. BREC was also within compliance for particulate emissions and opacity in the duct after the dry electrostatic precipitator, but not in compliance with the stack opacity regulation, and therefore wanted to investigate methods for stack opacity reduction.

  13. Spoilage characteristics of ground beef with added lactic acid bacteria and rosemary oleoresin packaged in a modified-atmosphere package and displayed at abusive temperatures.

    PubMed

    Parks, A R Hoyle; Brashears, M M; Woerner, W D; Martin, J N; Thompson, L D; Brooks, J C

    2012-06-01

    Lactic acid bacteria (LAB) can reduce Escherichia coli O157:H7 and Salmonella spp. in ground beef during storage. Furthermore, the addition of rosemary oleoresin (RO), a natural antioxidant, to ground beef has been shown to increase shelf life and is commonly used in modified-atmosphere packaged (MAP) ground beef. This study evaluated the effects of LAB and RO treatment on the shelf life and stability of MAP ground beef displayed at abusive (10°C) temperatures for 36 h. Subjective and objective sensory analyses were conducted to determine spoilage endpoints. Trained and consumer panel responses and Hunter lightness (L*), redness (a*), and yellowness (b*) values were not affected (P = 0.62, 0.66, 0.45) by LAB addition, although RO inclusion improved (P < 0.05) lean color. Ground beef with LAB and RO had significantly less (P < 0.0001) thiobarbituric acid reactive substance values than control ground beef, indicating decreased lipid oxidation. Additionally, RO inclusion reduced (P < 0.0001) off odors, as determined by trained and consumer odor panelists. Overall, the addition of LAB did not negatively affect beef color, odor, or oxidative rancidity, suggesting that LAB can be added to ground beef in MAP packaging as a processing intervention without detrimentally affecting shelf life or stability.

  14. Effect of storage and packaging on fatty acid composition and oxidation in dry fermented sausages made with added olive oil and antioxidants.

    PubMed

    Ansorena, Diana; Astiasarán, Iciar

    2004-06-01

    Dry fermented sausages produced by a partial substitution of pork backfat with pre-emulsified olive oil were manufactured and stored (2 and 5 months) using different packaging conditions (aerobic/vacuum piece/vacuum slices) in order to evaluate the intensity of the oxidation process. Also the effect of the addition of butylhydroxytoluene (BHT) and butylhydroxyanisole (BHA) to one of the modified batches was studied. Addition of olive oil, especially with antioxidants, was more effective than using vacuum storing methods in avoiding lipid oxidation during storage. After 5 months of storage at 4 °C, the combination of the increase in oleic acid and the preservation of PUFA by the antioxidant activity of the olive oil emulsion and antioxidants (when added), lead to better MUFA+PUFA/SFA ratios in olive oil containing sausages (1.90-1.98 g/100 g fatty acids) and particularly in antioxidants containing sausages (2.02-2.16 g/100 g) than in control ones (1.72 g/100 g). Vacuum packaging of the piece was the best method to minimise formation of lipid oxidation volatile compounds.

  15. Implication of azelaic acid in a Greenland Ice Core for oceanic and atmospheric changes in high latitudes

    NASA Astrophysics Data System (ADS)

    Kawamura, K.; Yokoyama, K.; Fujii, Y.; Watanabe, O.

    A Greenland ice core (450 years) has been studied for low molecular weight dicarboxylic acids (C2-C10) using a capillary gas chromatography and mass spectrometer. Their molecular distribution generally showed a predominance of succinic acid (C4) followed by oxalic (C2), malonic (C3), glutaric (C5), adipic (C6), and azelaic (C9) acids. Azelaic acid, that is a specific photochemical reaction product of biogenic unsaturated fatty acids, gave a characteristic historical trend in the ice core; i.e., the concentrations are relatively low during late 16th to 19th century (Little Ice Age) but become very high in late 19th to 20th century (warmer periods) with a large peak in 1940s AD. Lower concentrations of azelaic acid may have been caused by a depressed emission of unsaturated fatty acids from seawater microlayers due to enhanced sea ice coverage during Little Ice Age. Inversely, increased concentrations of azelaic acid in late 19th to 20th century are likely interpreted by an enhanced sea-to-air emission of the precursor unsaturated fatty acids due to a retreat of sea ice and/or by the enhanced production due to a potentially increased oxidizing capability of the atmosphere.

  16. Acute effects of breakfasts containing alpha-lactalbumin, or gelatin with or without added tryptophan, on hunger, 'satiety' hormones and amino acid profiles.

    PubMed

    Nieuwenhuizen, Arie G; Hochstenbach-Waelen, Ananda; Veldhorst, Margriet A B; Westerterp, Klaas R; Engelen, Mariëlle P K J; Brummer, Robert-Jan M; Deutz, Nicolaas E P; Westerterp-Plantenga, Margriet S

    2009-06-01

    Proteins are the most satiating macronutrients. Tryptophan (TRP) may contribute to the satiating effect, as it serves as a precursor for the anorexigenic neurotransmitter serotonin. To address the role of TRP in the satiating properties of dietary protein, we compared three different breakfasts, containing either alpha-lactalbumin (high in TRP), gelatin (low in TRP) or gelatin with added TRP (gelatin+TRP, high in TRP), on appetite. Twenty-four subjects (22-29 kg/m2; aged 19-37 years) received a subject-specific breakfast at t = 0 with 10, 55 and 35 % energy from protein, carbohydrate and fat respectively in a randomised, single-blind design. Hunger, glucagon-like peptide (GLP)-1, ghrelin, amino acid concentrations and energy intake during a subsequent lunch were determined. Suppression of hunger was stronger 240 min after the breakfast with alpha-lactalbumin compared with gelatin and gelatin+TRP. Total plasma amino acid concentrations were lower with alpha-lactalbumin compared with gelatin with or without TRP (from t = 180-240 min). TRP concentrations were higher after alpha-lactalbumin than after gelatin with or without TRP from t = 0-100 min, whereas from t = 100-240 min, TRP concentrations were lower after gelatin than after alpha-lactalbumin and gelatin+TRP. The plasma ratio of TRP to other large neutral amino acids (LNAA) was, only at t = 100 min, lower after gelatin+TRP than after the other breakfasts. Plasma amino acid responses, TRP concentrations and TRP:LNAA ratios were not correlated with hunger. GLP-1 and ghrelin concentrations were similar for all diets. Energy intake during a subsequent lunch was similar for all diets. Summarised, an alpha-lactalbumin breakfast suppresses hunger more than a gelatin or gelatin+TRP breakfast. This cannot be explained by (possible) differences found in TRP concentrations and TRP:LNAA ratios in the breakfasts and in plasma, as well as in circulating total amino acids, GLP-1 and ghrelin.

  17. The assessment of diffuse pollution from acid-mine drainage using an updated and revised diatom assessment procedure as an added-value bio-monitoring tool.

    PubMed

    Archibald, C G M; Taylor, J C

    2007-01-01

    Three data sources (physico-chemistry, bio-monitoring and eco-toxicology) are currently used in South Africa to establish environmental water quality conditions. Environmental water quality in turn is key information required for the "ecological reserve determination" of river reaches. Bio-monitoring in South Africa has been limited in recent times mostly to the use of the SASS procedure which relies on invertebrates only. This paper describes the re-introduction of a diatom-based water quality assessment as an added-value bio-monitoring tool. A specific example is discussed citing the response of diatom assemblages to diffuse pollution from acid mine drainage and how effective diatoms are as indicators of ecological integrity and river recovery measured downstream of the area of impact. The advantages of applying this bio-monitoring technique over other biological measures are presented in the context of technological advances in rapid image processing, species identification and software applications of diatom-based water quality indices. The valuable records of the diatom assemblages of the past, held in the South African Diatom Collection at the CSIR (KwaZulu-Natal), can now be accessed and interpreted as historical environmental water quality reference points for several rivers in South Africa.

  18. Mystery cloud of AD 536

    NASA Technical Reports Server (NTRS)

    Stothers, R. B.

    1984-01-01

    The possible cause of the densest and most persistent dry fog on record, which was observed in Europe and the Middle East during AD 536 and 537, is discussed. The fog's long duration toward the south and the high sulfuric acid signal detected in Greenland in ice cores dated around AD 540 support the theory that the fog was due to the explosion of the Rabaul volcano, the occurrence of which has been dated at about AD 540 by the radiocarbon method.

  19. Reproductive and Developmental Toxicity Screening Test of Ethyl Hydrogen Adipate in Rats

    PubMed Central

    Nam, Chunja; Hwang, Jae-Sik; Han, Kyoung-Goo; Jo, Eunhye; Yoo, Sun-kyoung; Eom, Ig-Chun; Kang, Jong-Koo

    2016-01-01

    This study aimed to evaluate the potential toxicity and safety of ethyl hydrogen adipate (EHA) by determining its effect on the reproductive function and development of Sprague-Dawley (SD) rats at dose levels of 0 (control), 200, 400, and 800 mg/kg/day. One male and five females of the 800 mg/kg/day died. Body weight loss was observed in the males of the 800 mg/kg/day and in females of the 400 and 800 mg/kg/day. In addition, mating indices decreased and pre-implantation loss rates increased in parental animals of the 400 and 800 mg/kg/day. The gestation index decreased in the male and female rats of the 800 mg/kg/day. Moreover, the body weight of the pups from the 800 mg/kg/day group decreased on post-parturition day 4. These results indicated that the no-observed-adverse-effect level of EHA for parental males and females was 400 mg/kg/day and 200 mg/kg/day, respectively, and that for pups was 400 mg/kg/day. PMID:27818735

  20. Pyridoxine-dependent epilepsy with elevated urinary α-amino adipic semialdehyde in molybdenum cofactor deficiency.

    PubMed

    Struys, Eduard Alexander; Nota, Benjamin; Bakkali, Abdellatif; Al Shahwan, Saad; Salomons, Gajja Sophi; Tabarki, Brahim

    2012-12-01

    α-Amino adipic semialdehyde (α-AASA) accumulates in body fluids from patients with pyridoxine-dependent epilepsy because of mutations in antiquitin (ALDH7A1) and serves as the biomarker for this condition. We have recently found that the urinary excretion of α-AASA was also increased in molybdenum cofactor and sulfite oxidase deficiencies. The seizures in pyridoxine-dependent epilepsy are caused by lowered cerebral levels of pyridoxal-5-phosphate (PLP), the bioactive form of pyridoxine (vitamin B(6)), which can be corrected by the supplementation of pyridoxine. The nonenzymatic trapping of PLP by the cyclic form of α-AASA is causative for the lowered cerebral PLP levels. We describe 2 siblings with clinically evident pyridoxine-responsive seizures associated with increased urinary excretion of α-AASA. Subsequent metabolic investigations revealed several metabolic abnormities, all indicative for molybdenum cofactor deficiency. Molecular investigations indeed revealed a known homozygous mutation in the MOCS2 gene. Based upon the clinically evident pyridoxine-responsive seizures in these 2 siblings, we recommend considering pyridoxine supplementation to patients affected with molybdenum cofactor or sulfite oxidase deficiencies.

  1. Characterization of a poly(butylene adipate-co-terephthalate)- hydrolyzing lipase from Pelosinus fermentans.

    PubMed

    Biundo, Antonino; Hromic, Altijana; Pavkov-Keller, Tea; Gruber, Karl; Quartinello, Felice; Haernvall, Karolina; Perz, Veronika; Arrell, Miriam S; Zinn, Manfred; Ribitsch, Doris; Guebitz, Georg M

    2016-02-01

    Certain α/β hydrolases have the ability to hydrolyze synthetic polyesters. While their partial hydrolysis has a potential for surface functionalization, complete hydrolysis allows recycling of valuable building blocks. Although knowledge about biodegradation of these materials is important regarding their fate in the environment, it is currently limited to aerobic organisms. A lipase from the anaerobic groundwater organism Pelosinus fermentans DSM 17108(PfL1) was cloned and expressed in Escherichia coli BL21-Gold (DE3) and purified from the cell extract. Biochemical characterization with small substrates showed thermoalkalophilic properties (Topt=50 °C, pHopt=7.5) and higher activity towards para-nitrophenyl octanoate (12.7 U mg(-1)) compared to longer and shorter chain lengths (C14 0.7 U mg(-1) and C2 4.3 U mg(-1), respectively). Crystallization and determination of the 3-D structure displayed the presence of a lid structure and a zinc ion surrounded by an extra domain. These properties classify the enzyme into the I.5 lipase family. PfL1 is able to hydrolyze poly(1,4-butylene adipate-co-terephthalate) (PBAT) polymeric substrates. The hydrolysis of PBAT showed the release of small building blocks as detected by liquid chromatography mass spectrometry (LC-MS). Protein dynamics seem to be involved with lid opening for the hydrolysis of PBAT by PfL1.

  2. AD6 (8-monochloro-3-beta-diethylamino-ethyl-4-methyl-7-ethoxycarbonyl-meth oxy coumarin) inhibits the release of arachidonic acid in human platelets stimulated by thrombin

    SciTech Connect

    Porcellati, S.; Costantini, V.; Prosdocimi, M.; Pistolesi, R.; Porrovecchio, P.; Nenci, G.G.; Goracci, G.

    1987-07-01

    The coumarin derivative AD6 is known to inhibit platelet aggregation and release and it possesses vasodilatory properties on coronary arteries of laboratory animals. Furthermore, the inhibition of the production of TxB2 from endogenous substrates after stimulation of human platelets with collagen has been demonstrated. The present report demonstrates that AD6 inhibits the production of labeled arachidonic acid and diglycerides from phospholipids of platelets stimulated with thrombin. This effect is dose-dependent and is already evident at a concentration of the drug (25 microM) which is unable to prevent the aggregation. Apparently, AD6 inhibits the release of arachidonic acid from phosphatidylinositol and choline phosphoglycerides which are the main sources of the substrate for the synthesis of prostaglandins and thromboxanes.

  3. Preschool Iron-Folic Acid and Zinc Supplementation in Children Exposed to Iron-Folic Acid in Utero Confers No Added Cognitive Benefit in Early School-Age123

    PubMed Central

    Christian, Parul; Morgan, Mary E.; Murray-Kolb, Laura; LeClerq, Steven C.; Khatry, Subarna K.; Schaefer, Barbara; Cole, Pamela M.; Katz, Joanne; Tielsch, James M.

    2011-01-01

    In Nepal, antenatal iron-folic acid supplementation improved aspects of intellectual, executive, and fine motor function among school-age children. We examined the impact of added zinc to the maternal antenatal supplement (M-IFAZn) and preschool supplementation from 12 to 36 mo with iron-folic acid (C-IFA) ± zinc (C-IFAZn) on cognitive outcomes compared to maternal iron-folic acid (M-IFA) alone. Children 7–9 y old (n = 780) who participated in early childhood micronutrient supplementation trial during 2001–2004 and whose mothers participated in an antenatal micronutrient supplementation between 1999 and 2001 were followed for cognitive assessments in 2007–2009. Using multivariate analysis of variance and adjusting for confounders, M-IFA with child supplementation (either C-IFA or C-IFAZn) did not impact scores on the tests of general intelligence (Universal Nonverbal Intelligence Test), and executive function (Stroop and go/no go tests) relative to the M-IFA alone. However, children in the C-IFAZn group had slightly lower scores on the backward digit span (−0.29, 95% CI: −0.55, −0.04) and Movement Assessment Battery for Children (1.33, 95% CI: 0.26, 2.40) relative to the referent group, whereas both C-IFA (−1.92, 95% CI: −3.12, −0.71) and C-IFAZn (−1.78, 95% CI: −2.63, −0.92) produced somewhat lower finger tapping test scores (fine motor skills). The combination of M-IFAZn and C-IFA or C-IFAZn did not lead to any outcome differences relative to M-IFA alone. Preschool iron-folic acid ± zinc to children exposed to iron-folic acid in utero or addition of zinc to maternal iron-folic acid conferred no additional benefit to cognitive outcomes assessed in early school age. The late timing of supplementation during preschool may explain the lack of impact of iron and/or zinc. PMID:21956955

  4. Orientifolded locally AdS3 geometries

    NASA Astrophysics Data System (ADS)

    Loran, F.; Sheikh-Jabbari, M. M.

    2011-01-01

    Continuing the analysis of [Loran F and Sheikh-Jabbari M M 2010 Phys. Lett. B 693 184-7], we classify all locally AdS3 stationary axi-symmetric unorientable solutions to AdS3 Einstein gravity and show that they are obtained by applying certain orientifold projection on AdS3, BTZ or AdS3 self-dual orbifold, respectively, O-AdS3, O-BTZ and O-SDO geometries. Depending on the orientifold fixed surface, the O-surface, which is either a space-like 2D plane or a cylinder, or a light-like 2D plane or a cylinder, one can distinguish four distinct cases. For the space-like orientifold plane or cylinder cases, these geometries solve AdS3 Einstein equations and are hence locally AdS3 everywhere except at the O-surface, where there is a delta-function source. For the light-like cases, the geometry is a solution to Einstein equations even at the O-surface. We discuss the causal structure for static, extremal and general rotating O-BTZ and O-SDO cases as well as the geodesic motion on these geometries. We also discuss orientifolding Poincaré patch AdS3 and AdS2 geometries as a way to geodesic completion of these spaces and comment on the 2D CFT dual to the O-geometries.

  5. Di-(2-ethylhexyl) adipate in selected total diet food composite samples.

    PubMed

    Cao, Xu-Liang; Zhao, Wendy; Churchill, Robin; Dabeka, Robert

    2013-11-01

    Polyvinyl chloride (PVC) food-wrapping films plasticized with di-(2-ethylhexyl) adipate (DEHA) are commonly used by grocery stores in Canada to rewrap meat, poultry, fish, cheese, and other foods. DEHA was assessed as part of the Government of Canada's Chemicals Management Plan. The main source of exposure for most age groups was expected to be food. Although the margin of exposure from food and beverages is considered to be adequately protective, the Government of Canada committed to performing targeted surveys of DEHA in foods and food packaging materials to better define Canadian exposure to DEHA through dietary intake. In order to determine whether more-comprehensive targeted surveys on DEHA in foods should be conducted, 26 food composite samples from the 2011 Canadian total diet study were selected and analyzed for DEHA using a method based on solvent and dispersive solid-phase extraction and gas chromatography-mass spectrometry. These 26 food composites include cheese, meat, poultry, fish, and fast foods, and PVC films were likely used in packaging the individual foods used to make the composites. DEHA was detected in most of the meat, poultry, and fish composite samples, with the highest concentration found in ground beef (11 μg/g), followed by beef steak (9.9 μg/g), freshwater fish (7.8 μg/g), poultry liver pâté (7.4 μg/g), fresh pork (6.9 μg/g), cold cuts and luncheon meats (2.8 μg/g), veal cutlets (2.1 μg/g), roast beef (1.3 μg/g), lamb (1.2 μg/g), and organ meats (0.20 μg/g). Targeted surveys should be conducted to investigate the presence of DEHA in various foods packaged with PVC films in more detail and provide updated occurrence data for accurate human exposure assessment.

  6. Crystal engineering of analogous and homologous organic compounds: hydrogen bonding patterns in trimethoprim hydrogen phthalate and trimethoprim hydrogen adipate

    PubMed Central

    Muthiah, Packianathan Thomas; Francis, Savarimuthu; Rychlewska, Urszula; Warżajtis, Beata

    2006-01-01

    Background Trimethoprim [2,4-diamino-5-(3',4',5'-trimethoxybenzyl)pyrimidine] is an antifolate drug. It selectively inhibits the bacterial dihydrofolate reductase (DHFR) enzyme. Results In the crystal structures of trimethoprim (TMP)-hydrogen phthalate (1) and trimethoprim-hydrogen adipate (2), one of the N atoms of the pyrimidine ring is protonated and it interacts with the deprotonated carboxylate oxygens through a pair of nearly parallel N-H...O hydrogen bonds to form a fork-like interaction. In the compound 1, the pyrimidine moieties of the TMP cations are centrosymmetrically paired through a pair of N-H...N hydrogen bonds involving 4-amino group and the N (N3) atom of the pyrimidine rings to form a 8-membered hydrogen bonded ring [R22(8)]. The 4-amino group of one TMP moiety and 2-amino group of another TMP moiety (both moieties are members of a base pair) are bridged by the carbonyl oxygen of the phthalate moiety through N-H...O hydrogen bonds forming 8-membered hydrogen-bonded ring [R22(8)]. The characteristic hydrogen-bonded rings observed in the structure aggregate into a supramolecular ladder consisting of a pair of chains, each of which is built up of alternate TMP and hydrogen phthalate ions. In the compound 2, two TMP cations and two hydrogen adipate anions are arranged about an inversion center so that the complementary DDAA (D = donor, A = acceptor) arrays of quadruple hydrogen-bonding patterns are formed. The head-to-tail arrangement of the hydrogen adipate ions leads to a hydrogen-bonded supramolecular chain. From crystal engineering point of view, it is interesting to note that the compound 1 has a hydrogen-bonded network remarkably identical with its aliphatic analogue, trimethoprim hydrogen maleate. Similarly the compound 2, resembles its homolog trimethoprim hydrogen glutarate. Conclusion In the crystal structure of trimethoprim hydrogen phthalate, the hydrogen-bonded network is remarkably identical with its aliphatic analogue, trimethoprim

  7. Oxidative carbonylation - A new syngas route to sebacic acid

    SciTech Connect

    Kesling, H.S.

    1986-03-01

    Conventional technology for sebacic acid manufacture involves caustic soda decomposition of ricinoleic acid at high temperature. Principal co-products include 2-octanol and glycerine. Castor oil, which is the natural source for ricinoleic acid, is subject to price fluctuation due to cyclic crop production and protectionist policies by foreign governments. Castor oil technology is also at disadvantage because the overall product yield is low (<80%) and co-product 2-octanol must compete with cheap 2-ethylhexanol in plasticizer applications. These and other factors have resulted in a significant decline in the sebacic acid market from about 30 MM lbs. per year in the 70's to less that 5 MM lbs. in the 80's. Thus, there is a clear need for a new process to produce sebacic acid from cheap and readily available petrochemicals. In Japan, the need for new technology was answered by the development of an electrolytic route to sebacic acid. The Kolbe type electrolytic process involves dimerization of adipic acid half methyl ester salt to give dimethyl sebacate. The dimerization proceeds in 92% yield with 90% selectivity based on the adipate half ester. The main drawbacks of this process are the cost of energy utilized by the electrolytic process and the cost of adipic acid. A recent Chem Systems report indicates a small advantage for the Asahi electrolytic process with ample room for new technology development.

  8. Economics of retrofitting Big Rivers Electric Corporation's lime-based FGD (Flue-Gas Desulfurization) system to organic-acid-enhanced limestone operations. Final report, August 1983-December 1984

    SciTech Connect

    Laslo, D.; Ostroff, N.; Foley, R.; Schreyer, D.G.

    1985-04-01

    The report describes the site specific changes required to convert an existing lime FGD system to a limestone system enhanced by dibasic acid (DBA) or adipic acid, and the costs of making such a change. In 1982-83, pilot plant tests were conducted at the R. D. Green Station of Big Rivers Electric Corporation (BREC). The final report of the pilot testing included comparisons of the operating costs of a lime-based full-size absorber, to those of a retrofit limestone system enhanced with DBA or adipic acid. Results of this analysis indicate that an annual cost savings of $2.6 million could be achieved by converting the existing BREC lime system to an adipic-acid-enhanced limestone system, and an annual savings of $3.1 million could be achieved by converting to a DBA-enhanced system.

  9. Warped AdS3 black holes

    NASA Astrophysics Data System (ADS)

    Anninos, Dionysios; Li, Wei; Padi, Megha; Song, Wei; Strominger, Andrew

    2009-03-01

    Three dimensional topologically massive gravity (TMG) with a negative cosmological constant -l-2 and positive Newton constant G admits an AdS3 vacuum solution for any value of the graviton mass μ. These are all known to be perturbatively unstable except at the recently explored chiral point μl = 1. However we show herein that for every value of μl ≠ 3 there are two other (potentially stable) vacuum solutions given by SL(2,Bbb R) × U(1)-invariant warped AdS3 geometries, with a timelike or spacelike U(1) isometry. Critical behavior occurs at μl = 3, where the warping transitions from a stretching to a squashing, and there are a pair of warped solutions with a null U(1) isometry. For μl > 3, there are known warped black hole solutions which are asymptotic to warped AdS3. We show that these black holes are discrete quotients of warped AdS3 just as BTZ black holes are discrete quotients of ordinary AdS3. Moreover new solutions of this type, relevant to any theory with warped AdS3 solutions, are exhibited. Finally we note that the black hole thermodynamics is consistent with the hypothesis that, for μl > 3, the warped AdS3 ground state of TMG is holographically dual to a 2D boundary CFT with central charges c_R-formula and c_L-formula.

  10. Warped AdS3 black holes

    NASA Astrophysics Data System (ADS)

    Song, Wei; Anninos, Dionysios; Li, Wei; Padi, Megha; Strominger, Andrew

    2009-03-01

    Three dimensional topologically massive gravity (TMG) with a negative cosmological constant -ell-2 and positive Newton constant G admits an AdS3 vacuum solution for any value of the graviton mass μ. These are all known to be perturbatively unstable except at the recently explored chiral point μell = 1. However we show herein that for every value of μell ≠ 3 there are two other (potentially stable) vacuum solutions given by SL(2,Bbb R) × U(1)-invariant warped AdS3 geometries, with a timelike or spacelike U(1) isometry. Critical behavior occurs at μell = 3, where the warping transitions from a stretching to a squashing, and there are a pair of warped solutions with a null U(1) isometry. For μell > 3, there are known warped black hole solutions which are asymptotic to warped AdS3. We show that these black holes are discrete quotients of warped AdS3 just as BTZ black holes are discrete quotients of ordinary AdS3. Moreover new solutions of this type, relevant to any theory with warped AdS3 solutions, are exhibited. Finally we note that the black hole thermodynamics is consistent with the hypothesis that, for μell > 3, the warped AdS3 ground state of TMG is holographically dual to a 2D boundary CFT with central charges c_R-formula and c_L-formula.

  11. By-products of electrochemical synthesis of suberic acid

    SciTech Connect

    Shirobokova, O.I.; Adamov, A.A.; Freidlin, G.N.; Antonenko, N.S.; Grudtsyn, Yu.D.

    1988-05-10

    By-products of the electrochemical synthesis of dimethyl suberate from glutaric anhydride were studied. This is isolated by thermal dehydration of a mixture of lower dicarboxylic acids that are wastes from the production of adipic acid. To isolate the by-products, they used the methods of vacuum rectification and preparative gas-liquid chromatography, and for their identification, PMR, IR spectroscopy, gas-liquid chromatography, and other known physicochemical methods of investigation.

  12. 40 CFR 98.50 - Definition of source category.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.50 Definition of source category. The adipic acid production source category consists of all adipic acid production facilities that use oxidation to produce adipic acid....

  13. 40 CFR 98.50 - Definition of source category.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.50 Definition of source category. The adipic acid production source category consists of all adipic acid production facilities that use oxidation to produce adipic acid....

  14. Effects of chemical versus enzymatic processing of kenaf fibers on poly(hydroxybutyrate-co-valerate)/poly(butylene adipate-co-terephthalate) composite properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effect of fiber retting on crystallization and mechanical performance was investigated. A poly(hydroxybutyrate-co-valerate) (PHBV) and poly(butylene adipate-co-terephthalate) (PBAT) blend in a 80/20 ratio was modified using 5% by weight kenaf (Hibiscus cannabinus L.) fiber. Fibers were retted us...

  15. Segmented strings in AdS 3

    NASA Astrophysics Data System (ADS)

    Callebaut, Nele; Gubser, Steven S.; Samberg, Andreas; Toldo, Chiara

    2015-11-01

    We study segmented strings in flat space and in AdS 3. In flat space, these well known classical motions describe strings which at any instant of time are piecewise linear. In AdS 3, the worldsheet is composed of faces each of which is a region bounded by null geodesics in an AdS 2 subspace of AdS 3. The time evolution can be described by specifying the null geodesic motion of kinks in the string at which two segments are joined. The outcome of collisions of kinks on the worldsheet can be worked out essentially using considerations of causality. We study several examples of closed segmented strings in AdS 3 and find an unexpected quasi-periodic behavior. We also work out a WKB analysis of quantum states of yo-yo strings in AdS 5 and find a logarithmic term reminiscent of the logarithmic twist of string states on the leading Regge trajectory.

  16. Self-assembly in solvates of 2,4-diamino-6-(4-methyl- phenyl)-1,3,5-triazine and in its molecular adducts with some aliphatic dicarboxylic acids

    NASA Astrophysics Data System (ADS)

    Nandy, Purnendu; Nayak, Amrita; Biswas, Sharmita Nandy; Pedireddi, V. R.

    2016-03-01

    Solid state structures of 2,4-diamino-6-(4-methylphenyl)-1,3,5-triazine, 1, in the form of methanol and dimethylsulfoxide (DMSO) solvates, as well as supramolecular assemblies of 1 with various aliphatic dicarboxylic acids, oxalic (a), malonic (b), succinic (c), glutaric (d) and adipic (e) have been reported. Analysis of the assemblies has been carried out by single crystal X-ray diffraction and thermal methods. Triazine 1 yields anhydrous molecular adducts with acids a-d, upon co-crystallization either from CH3OH and DMSO solvents. However acid e gives anhydrous adduct from DMSO solvent, while it gives a methanol adduct from CH3OH. Structure determination reveals that molecular adducts 1a, 1d and 1e are in a 2:1 ratio of 1 and the corresponding acid. However the ratio is 1:1, in 1b, perhaps due to the involvement of one of the acid groups in the intramolecular hydrogen bonding and in adduct 1c the ratio observed is 3:2. Structural features in all these assemblies have been rationalised in terms of various recognition patterns formed between the acceptor and donor groups. A noteworthy feature is that -COOH groups in acid a establish interaction with 1 through amino groups, while such interactions are observed to be through hetero -N atoms in case of the acids b-e.

  17. Conformations, energies, and intramolecular hydrogen bonds in dicarboxylic acids: implications for the design of synthetic dicarboxylic acid receptors.

    PubMed

    Nguyen, Thanh Ha; Hibbs, David E; Howard, Siân T

    2005-09-01

    The various conformers of the dicarboxylic acids HO2C--(CH2)n--CO2H, n = 1-4, were obtained using density functional methods (DFT), both in the gas phase and in the aqueous phase using a polarized continuum model (PCM). Several new conformers were identified, particularly for the two larger molecules glutaric (n = 3) and adipic acid (n =4). The PCM results show that the stability of most conformers were affected, many becoming unstable in the aqueous phase; and the energy ordering of conformers is also different. The results suggest that conformational preferences could be important in determining the design and stability of appropriate synthetic receptors for glutaric and adipic acid. Geometry changes between gas and aqueous phases were most marked in those conformers containing an intramolecular hydrogen bond. Additional calculations have probed the strength of intramolecular hydrogen bonds in these dicarboxylic acids. In the cases of glutaric and adipic acid, the strength of the intramolecular hydrogen bond were estimated to be around 28-29 kJ/mol, without any vibrational energy correction. The intramolecular hydrogen bond energies in malonic and succinic acid were also estimated from the calculated H-bond distances using an empirical relationship. Intramolecular H-bond redshifts of 170-250 cm(-1) have been estimated from the results of the harmonic frequency analyses.

  18. Ruthenium-catalyzed oxidation of alkenes, alkynes, and alcohols to organic acids with aqueous hydrogen peroxide.

    PubMed

    Che, Chi-Ming; Yip, Wing-Ping; Yu, Wing-Yiu

    2006-09-18

    A protocol that adopts aqueous hydrogen peroxide as a terminal oxidant and [(Me3tacn)(CF3CO2)2Ru(III)(OH2)]CF3CO2 (1; Me3tacn = 1,4,7-trimethyl-1,4,7-triazacyclononane) as a catalyst for oxidation of alkenes, alkynes, and alcohols to organic acids in over 80% yield is presented. For the oxidation of cyclohexene to adipic acid, the loading of 1 can be lowered to 0.1 mol %. On the one-mole scale, the oxidation of cyclohexene, cyclooctene, and 1-octanol with 1 mol % of 1 produced adipic acid (124 g, 85% yield), suberic acid (158 g, 91% yield), and 1-octanoic acid (129 g, 90% yield), respectively. The oxidative C=C bond-cleavage reaction proceeded through the formation of cis- and trans-diol intermediates, which were further oxidized to carboxylic acids via C-C bond cleavage.

  19. Development of a pH sensor based on a nanostructured filter adding pH-sensitive fluorescent dye for detecting acetic acid in photovoltaic modules

    NASA Astrophysics Data System (ADS)

    Asaka, Takashi; Itayama, Tomohiro; Nagasaki, Hideaki; Iwami, Kentaro; Yamamoto, Chizuko; Hara, Yukiko; Masuda, Atsushi; Umeda, Norihiro

    2015-08-01

    Acetic acid formed via the hydrolysis of ethylene vinyl acetate (EVA) as an encapsulant in photovoltaic (PV) modules causes a decrease in the conversion efficiency of such modules by grid corrosion. Here, a nondestructive and simple optical method for evaluating the condition of PV modules is proposed. This method uses a dual-wavelength pH-sensitive fluorescent dye to detect acetic acid in PV modules using a change in pH. The change in pH induced by the formation of acetic acid is detected by the change in the ratio of the fluorescent intensities of two peaks of the dye. A pH-sensitive fluorescent dye showed sensitivity for small amounts of acetic acid such as that produced from EVA. Furthermore, a membrane filter dyed with a pH-sensitive fluorescent dye was confirmed to detect acetic acid in aged EVA after a damp-heat test (85 °C, 85%) for 5000 h in PV modules.

  20. Adding a combination of hydroxycitrate and lipoic acid (METABLOC™) to chemotherapy improves effectiveness against tumor development: experimental results and case report.

    PubMed

    Guais, Adeline; Baronzio, GianFranco; Sanders, Edward; Campion, Frédéric; Mainini, Carlo; Fiorentini, Giammaria; Montagnani, Francesco; Behzadi, Mahsa; Schwartz, Laurent; Abolhassani, Mohammad

    2012-02-01

    Altered metabolism of cancer first highlighted by Otto Warburg has a long history. Although ignored for a considerable amount of time, it is now receiving substantial attention. We recently published results obtained with a combination of two drugs, lipoic acid and hydroxycitrate, targeting metabolic enzymes particularly affected in cancer: ATP citrate lyase and pyruvate dehydrogenase kinase. This treatment was as efficient as chemotherapy in the three mouse cancer models that were tested. In this work, we asked if our drug combination could be used in conjunction with standard cytotoxic chemotherapy, in particular cisplatin, to improve basic protocol efficacy. A combination of lipoic acid and hydroxycitrate was administered to mice implanted with syngeneic cancer cells, LL/2 lung carcinoma and MBT-2 bladder carcinoma, concommitantly with classical chemotherapy (cisplatin or methotrexate). We demonstrate that the triple combination lipoic acid + hydroxycitrate + cisplatin or methotrexate is more efficient than cisplatin or methotrexate used individually or the combination of lipoic acid and hydroxycitrate administered alone. Of particular note are the results obtained in the treatment of an 80 year-old female who presented with ductal adenocarcinoma of the pancreas accompanied by liver metastases. A treatment course using gemcitabine plus α-lipoic acid and hydroxycitrate gave highly promising results. The in vivo data, coupled with the case study results, suggest a possible advantage in using a treatment targeted at cancer metabolism in association with classical chemotherapy.

  1. AdS duals of matrix strings

    NASA Astrophysics Data System (ADS)

    Morales, Jose F.; Samtleben, Henning

    2003-06-01

    We review recent work on the holographic duals of type II and heterotic matrix string theories described by warped AdS3 supergravities. In particular, we compute the spectra of Kaluza-Klein primaries for type I, II supergravities on warped AdS3 × S7 and match them with the primary operators in the dual two-dimensional gauge theories. The presence of non-trivial warp factors and dilaton profiles requires a modification of the familiar dictionary between masses and 'scaling' dimensions of fields and operators. We present these modifications for the general case of domain wall/QFT correspondences between supergravities on warped AdSd+1 × Sq geometries and super Yang-Mills theories with 16 supercharges.

  2. Effects of linseed and quercetin added to the diet of fattening lambs on the fatty acid profile and lipid antioxidant status of meat samples.

    PubMed

    Andrés, S; Morán, L; Aldai, N; Tejido, M L; Prieto, N; Bodas, R; Giráldez, F J

    2014-06-01

    Thirty-two Merino lambs fed barley straw and a concentrate formulated either with palm oil (CTRL group) or with linseed (+LS group), both alone or supplemented with quercetin (+QCT group or +LS+QCT group) were used to assess the effects of these dietary supplements on meat quality attributes. After being slaughtered, the longissimus thoracis muscles were used to study the fatty acid (FA) profile in detail, whilst longissimus lumborum slices were stored under refrigerated conditions to determine the lipid stability. Linseed increased the content of highly unsaturated n-3 long-chain fatty acid (20:5n-3; 22:5n-3; 22:6n-3). Interestingly, a significant increment of rumenic acid content (9c,11t-18:2) was observed when this seed was administered together with dietary quercetin. Moreover, the feeding of quercetin resulted in a reduction in the proportion of saturated FA and a decrease in lipid peroxidation of meat when the lambs were fed linseed. In conclusion, from both a nutritional and a commercial (shelf-life) point of view, it may be useful to include a source of quercetin when lambs are fed linseed diets.

  3. Effect of adding amino acids residues in N- and C-terminus of Vip3Aa16 (L121I) toxin.

    PubMed

    Sellami, Sameh; Cherif, Marwa; Jamoussi, Kaïs

    2016-06-01

    To study the importance of N- and C-terminus of Bacillus thuringiensis Vip3Aa16 (L121I) toxin (88 kDa), a number of mutants were generated. The addition of two (2R: RS) or eleven (11R: RSRPGHHHHHH) amino acid residues at the Vip3Aa16 (L121I) C-terminus allowed to an unappropriated folding illustrated by the abundant presence of the 62 kDa proteolytic form. The produced Vip3Aa16 (L121I) full length form was less detected when increasing the number of amino acids residues in the C-terminus. Bioassays demonstrated that the growth of the lepidopteran Ephestia kuehniella was slightly affected by Vip3Aa16 (L121I)-2R and not affected by Vip3Aa16 (L121I)-11R. Additionally, the fusion at the Vip3Aa16 (L121I) N-terminus of 39 amino acids harboring the E. coli OmpA leader peptide and the His-tag sequence allowed to the increase of protease sensitivity of Vip3Aa16 (L121I) full length form, as only the 62 kDa proteolysis form was detected. Remarkably, this fused protein produced in Escherichia coli (E. coli) was biologically inactive toward Ephestia kuehniella larvae. Thus, the N-terminus of the protein is required to the accomplishment of the insecticidal activity of Vip3 proteins. This report serves as guideline for the study of Vip3Aa16 (L121I) protein stability and activity.

  4. Wortmannilactones I-L, new NADH-fumarate reductase inhibitors, induced by adding suberoylanilide hydroxamic acid to the culture medium of Talaromyces wortmannii.

    PubMed

    Liu, Wen-Cai; Wang, Yi-Yu; Liu, Jun-Hui; Ke, Ai-Bing; Zheng, Zhi-Hui; Lu, Xin-Hua; Luan, Yu-Shi; Xiu, Zhi-Long; Dong, Yue-Sheng

    2016-11-01

    With the aim of finding more potential inhibitors against NADH-fumarate reductase (specific target for treating helminthiasis and cancer) from natural resources, Talaromyces wortmannii was treated with the epigenome regulatory agent suberoylanilide hydroxamic acid, which resulted in the isolation of four new wortmannilactones derivatives (wortmannilactones I-L, 1-4). The structures of these new compounds were elucidated based on IR, HRESIMS and NMR spectroscopic data analyses. These four new compounds showed potent inhibitory activity against NADH-fumarate reductase with the IC50 values ranging from 0.84 to 1.35μM.

  5. Adding wheat middlings, microbial phytase, and citric acid to corn-soybean meal diets for growing pigs may replace inorganic phosphorus supplementation.

    PubMed

    Han, Y M; Roneker, K R; Pond, W G; Lei, X G

    1998-10-01

    Three experiments were conducted with 96 growing Landrace x Yorkshire x Duroc crossbreds to determine the collective effectiveness of cereal phytase from wheat middlings, microbial phytase, and citric acid in improving phytate-P bioavailability in corn-soy diets. In Exp. 1, 40 gilts (7 wk old) were fed five diets for 8 wk. Diets 1, 2, and 3 were low-P, corn-soybean meal diets (CSB) + 0, .1, or .2% inorganic P (Pi) as calcium phosphate, respectively. Diet 4 was a similar corn-soy diet that included 15% wheat middlings (461 cereal phytase U/kg). Diet 5 was the CSB + microbial phytase (1,200 U/kg; Natuphos, BASF, Mount Olive, NJ). In Exp. 2, 16 barrows (8 wk old) were fed two diets for 6 wk. Diet 1 was the same as Diet 3 of Exp. 1 (.2% Pi). Diet 2 was Diet 4 of Exp. 1 + microbial phytase (300 U/kg). In Exp. 3, 40 barrows and gilts (6 wk old) were fed four diets for 6 wk. Diets 1 and 2 were the same as those in Exp. 2. Diet 3 was Diet 2 of Exp. 2 + 1.5% citric acid. Diet 4 was similar to Diet 3 but contained 10 instead of 15% wheat middlings. In Exp. 1, pigs fed the low-P, CSB (Diet 1) had lower (P < .05) ADG, ADFI, plasma Pi concentration, bone strength, and mobility score than pigs of the other four treatments. Measurements for pigs fed the 15% wheat middlings diet were not significantly different from those of pigs fed the CSB + .1% Pi or microbial phytase. In Exp. 2, ADG (P=.06) during wk 1 to 3 and gain:feed ratio (P < .02) and plasma Pi concentration (P < .005) during all weeks favored pigs fed the CSB + .2% Pi compared with the other diet including 15% wheat middlings. In Exp. 3, identical ADG during all weeks and similar plasma Pi concentrations at wk 4 and 6 were observed between pigs fed the two citric acid diets (Diets 3 and 4) and the CSB + .2% Pi (Diet 1). Pigs fed Diet 4 (10% wheat middlings) had even higher (P < .02) gain:feed ratio during wk 1 to 3 than those fed Diet 1. It seems feasible to completely replace calcium phosphate with 10 to 15% wheat

  6. Alterations of amino Acid level in depressed rat brain.

    PubMed

    Yang, Pei; Li, Xuechun; Ni, Jian; Tian, Jingchen; Jing, Fu; Qu, Changhai; Lin, Longfei; Zhang, Hui

    2014-10-01

    Amino-acid neurotransmitter system dysfunction plays a major role in the pathophysiology of depression. Several studies have demonstrated the potential of amino acids as a source of neuro-specific biomarkers could be used in future diagnosis of depression. Only partial amino acids such as glycine and asparagine were determined from certain parts of rats' brain included hippocampi and cerebral cortex in previous studies. However, according to systematic biology, amino acids in different area of brain are interacted and interrelated. Hence, the determination of 34 amino acids through entire rats' brain was conducted in this study in order to demonstrate more possibilities for biomarkers of depression by discovering other potential amino acids in more areas of rats' brain. As a result, 4 amino acids (L-aspartic acid, L-glutamine, taurine and γ-amino-n-butyric acid) among 34 were typically identified as potentially primary biomarkers of depression by data statistics. Meanwhile, an antidepressant called Fluoxetine was employed to verify other potential amino acids which were not identified by data statistics. Eventually, we found L-α-amino-adipic acid could also become a new potentially secondary biomarker of depression after drug validation. In conclusion, we suggested that L-aspartic acid, L-glutamine, taurine, γ-amino-n-butyric acid and L-α-amino-adipic acid might become potential biomarkers for future diagnosis of depression and development of antidepressant.

  7. Photoelectron spectroscopy of carbonyls: saturated normal dicarboxylic acids

    SciTech Connect

    Chattopadhyay, S.; Meeks, J.L.; Findley, G.L.; McGlynn, S.P.

    1981-04-16

    The ultraviolet photoelectron spectra (UPS) of oxalic, malonic, succinic, glutaric, and adipic acids, and various of their simple derivatives, are presented and discussed. The four lowest-energy ionization events, (I(n/sub +/), I(n/sub -), I (..pi../sub +/), I(..pi../sub -/)), are assigned in all cases. Higher ionization events are not assigned because of molecule-limited resolution in the higher-energy UPS region.

  8. Ice core profiles of saturated fatty acids (C12:0-C30:0) and oleic acid (C18:1) from southern Alaska since 1734 AD: A link to climate change in the Northern Hemisphere

    NASA Astrophysics Data System (ADS)

    Pokhrel, Ambarish; Kawamura, Kimitaka; Seki, Osamu; Matoba, Sumio; Shiraiwa, Takayuki

    2015-01-01

    An ice core drilled at Aurora Peak in southeast Alaska was analyzed for homologous series of straight chain fatty acids (C12:0-C30:0) including unsaturated fatty acid (oleic acid) using gas chromatography (GC/FID) and GC/mass spectrometry (GC/MS). Molecular distributions of fatty acids are characterized by even carbon number predominance with a peak at palmitic acid (C16:0, av. 20.3 ± SD. 29.8 ng/g-ice) followed by oleic acid (C18:1, 19.6 ± 38.6 ng/g-ice) and myristic acid (C14:0, 15.3 ± 21.9 ng/g-ice). The historical trends of short-chain fatty acids, together with correlation analysis with inorganic ions and organic tracers suggest that short-chain fatty acids (except for C12:0 and C15:0) were mainly derived from sea surface micro layers through bubble bursting mechanism and transported over the glacier through the atmosphere. This atmospheric transport process is suggested to be linked with Kamchatka ice core δD record from Northeast Asia and Greenland Temperature Anomaly (GTA). In contrast, long-chain fatty acids (C20:0-C30:0) are originated from terrestrial higher plants, soil organic matter and dusts, which are also linked with GTA. Hence, this study suggests that Alaskan fatty acids are strongly influenced by Pacific Decadal Oscillation/North Pacific Gyre Oscillation and/or extra tropical North Pacific surface climate and Arctic oscillation. We also found that decadal scale variability of C18:1/C18:0 ratios in the Aurora Peak ice core correlate with the Kamchatka ice core δD, which reflects climate oscillations in the North Pacific. This study suggests that photochemical aging of organic aerosols could be controlled by climate periodicity.

  9. Oxidation of cyclohexanediol derivatives with 12-tungstophosphoric acid-hydrogen peroxide system.

    PubMed

    Fujitani, Kango; Mizutani, Toshihiro; Oida, Tatsuo; Kawase, Tokuzo

    2009-01-01

    Oxidation of cyclohexanediol derivatives with 12-tungstophospholic acid-hydrogen peroxide system was investigated focusing on a reaction mechanism in the preparation of dicarboxylic acids from olefin because oxidative cleavage of vicinal diols would be a rate-determining step in oxidative cleavage of carbon-carbon double bonds. trans-1,2-Cyclohexanediol (DHC) was converted to adipic acid almost quantatively, while 1-hydroxy-2-methoxycyclohexane (HMC) gave a mixture of adipic acid, glutaric acid and monomethyl adipate. In the case of 1,4-cyclohexanediol, 4-hydroxy-cyclohexanone and many hyperoxidated products were obtained. Based on results for HMC, it is concluded that following route would be also reasonable in oxidative cleavage of vicinal diol with 12-tungstophospholic acid-hydrogen peroxide system: (1) first oxidation of vicinal diol to alpha-hydroxyketone, (2) nucleophilic attack of hydrogen peroxide attacks to carbonyl carbon, (3) Baiyer-Villiger rearrangement of dihydroxy-hydroperoxide to a cyclic ester, (4) hydrolysis and final oxidation to dicarboxylic acid.

  10. Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectra of poly(butylene adipate).

    PubMed

    Rizzarelli, Paola; Puglisi, Concetto; Montaudo, Giorgio

    2006-01-01

    Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectrometry (MALDI-TOF/TOF-MS/MS) was employed to analyze four poly(butylene adipate) (PBAd) oligomers and to investigate their fragmentation pathways as a continuation of our work on the MALDI-TOF/TOF-MS/MS study of synthetic polymers. MALDI-TOF/TOF-MS/MS analysis was performed on oligomers terminated by carboxyl and hydroxyl groups, methyl adipate and hydroxyl groups, dihydroxyl groups, and dicarboxyl groups. The sodium adducts of these oligomers were selected as precursor ions. Different end groups do not influence the fragmentation of sodiated polyester oligomers and similar series of product ions were observed in all the MALDI-TOF/TOF-MS/MS spectra. According to the structures of the most abundant product ions identified in the present work, three fragmentation pathways have been proposed to occur most frequently in PBAd: beta-hydrogen-transfer rearrangement, leading to the selective cleavage of the --O--CH(2)-- bonds; --CH(2)--CH(2)-- (beta--beta) bond cleavage in the adipate moiety; and ester bond scission.

  11. Synthesis of biocompatible poly(ɛ-caprolactone)- block-poly(propylene adipate) copolymers appropriate for drug nanoencapsulation in the form of core-shell nanoparticles.

    PubMed

    Nanaki, Stavroula G; Pantopoulos, Kostas; Bikiaris, Dimitrios N

    2011-01-01

    Poly(propylene adipate)-block-poly(ɛ-caprolactone) copolymers were synthesized using a combination of polycondensation and ring-opening polymerization of ɛ-caprolactone in the presence of poly(propylene adipate). Gel permeation chromatography was used for molecular weight determination, whereas hydrogen-1 nuclear magnetic resonance and carbon-13 nuclear magnetic resonance spectroscopy were employed for copolymer characterization and composition evaluation. The copolymers were found to be block while their composition was similar to the feeding ratio. They formed semicrystalline structures, while only poly(ɛ-caprolactone) formed crystals, as shown by wide angle X-ray diffraction. Differential scanning calorimetry data suggest that the melting point and heat of fusion of copolymers decreased by increasing the poly(propylene adipate) amount. The synthesized polymers exhibited low cytotoxicity and were used to encapsulate desferrioxamine, an iron-chelating drug. The desferrioxamine nanoparticles were self-assembled into core shell structures, had mean particle size <250 nm, and the drug remained in crystalline form. Further studies revealed that the dissolution rate was mainly related to the melting temperature, as well as to the degree of crystallinity of copolymers.

  12. Chemical modification of zinc hydroxide nitrate and Zn-Al-layered double hydroxide with dicarboxylic acids.

    PubMed

    Arizaga, Gregorio Guadalupe Carbajal; Mangrich, Antonio Salvio; da Costa Gardolinski, José Eduardo Ferreira; Wypych, Fernando

    2008-04-01

    A zinc hydroxide nitrate (ZHN), Zn5(OH)8(NO3)2.2H2O, and a layered double hydroxide (LDH), Zn/Al-NO3 were doped with 0.2 mol% of Cu2+ during alkaline chemical precipitation. Both compounds were intercalated with adipate ((-)OOC(CH2)4COO(-)), azelate ((-)OOC(CH2)7COO(-)), and benzoate (C6H5COO(-)) ions through ion exchange reactions. Solid state 13C nuclear magnetic resonance spectroscopy showed only one signal of carboxylic carbon for adipate and azelate intercalated into LDH, indicating that the carboxylic ends of both acids were equivalent, whereas the signal split when the intercalation was into the ZHN matrix. The electron paramagnetic resonance (EPR) spectrum of copper in octahedral cation sites of LDH layers showed a Hamiltonian parameter ratio g ||/A ||=170 cm and, after intercalation of adipate, the change was not significant: g ||/A ||=174 cm. This result indicates that the carboxylate ions did not coordinate with copper centers. Nonetheless, the intercalation of azelate increased the ratio to g ||/A ||=194 cm, similar to the spectra of ZHN modified with adipate, g ||/A ||=199 cm, and azelate, g ||/A ||=183 and 190 cm, which are associated with the coordination of copper by weak carboxylate anion ligands. Copper occupies octahedral or tetrahedral sites in ZHN layers, and the EPR spectra indicate that the dicarboxylate anions reacted preferentially with octahedral sites, whereas benzoate reacted with both sites.

  13. Added value of next generation gene panel analysis for patients with elevated methylmalonic acid and no clinical diagnosis following functional studies of vitamin B12 metabolism.

    PubMed

    Pupavac, Mihaela; Tian, Xia; Chu, Jordan; Wang, Guoli; Feng, Yanming; Chen, Stella; Fenter, Remington; Zhang, Victor W; Wang, Jing; Watkins, David; Wong, Lee-Jun; Rosenblatt, David S

    2016-03-01

    Next generation sequencing (NGS) based gene panel testing is increasingly available as a molecular diagnostic approach for inborn errors of metabolism. Over the past 40 years patients have been referred to the Vitamin B12 Clinical Research Laboratory at McGill University for diagnosis of inborn errors of cobalamin metabolism by functional studies in cultured fibroblasts. DNA samples from patients in which no diagnosis was made by these studies were tested by a NGS gene panel to determine whether any molecular diagnoses could be made. 131 DNA samples from patients with elevated methylmalonic acid and no diagnosis following functional studies of cobalamin metabolism were analyzed using the 24 gene extended cobalamin metabolism NGS based panel developed by Baylor Miraca Genetics Laboratories. Gene panel testing identified two or more variants in a single gene in 16/131 patients. Eight patients had pathogenic findings, one had a finding of uncertain significance, and seven had benign findings. Of the patients with pathogenic findings, five had mutations in ACSF3, two in SUCLG1 and one in TCN2. Thus, the NGS gene panel allowed for the presumptive diagnosis of 8 additional patients for which a diagnosis was not made by the functional assays.

  14. Chiral separation of amino acids by copper(II) complexes of tetradentate diaminodiamido-type ligands added to the eluent in reversed-phase high-performance liquid chromatography: a ligand exchange mechanism.

    PubMed

    Galaverna, G; Corradini, R; Dallavalle, F; Folesani, G; Dossena, A; Marchelli, R

    2001-07-13

    In this paper we report a study on the mechanism of the enantiomeric separation of unmodified D,L-amino acids in RP-HPLC by copper(II) complexes of two tetradentate diaminodiamido ligands, (S,S)-N,N'-bis(phenylalanyl)ethanediamine (PheNN-2) and (S,S)-N,N'-bis(methylphenylalanyl)ethanediamine (Me2PheNN-2), added to the eluent. The aim is to investigate whether and how a copper(II) complex with no free equatorial positions can perform chiral discrimination of bidentate analytes such as unmodified amino acids. The problem is approached in a systematic way by: (a) varying the different chromatographic parameters (pH, selector concentration, eluent polarity); (b) performing chiral separation with the selector adsorbed on the stationary phase; (c) studying the ternary complex formation of these ligands with D- and L-amino acids in solution by glass electrode potentiometry and electrospray ionization MS. All the experimental data are consistent with a mechanism of chiral recognition, based on ligand exchange, which involves as selectors the species [Cu2L2H(-2)]2+ and [CuLH(-2)] and proceeds by displacement of two binding sites from the equatorial positions, giving rise to the ternary species [CuLA]+ and [CuLH(-1) A]. The most important factor responsible for chiral discrimination seems to be the affinity of the diastereomeric ternary complexes for the stationary phase since no enantioselectivity is observed in solution.

  15. An AdS Crunch in Supergravity

    NASA Astrophysics Data System (ADS)

    Hertog, Thomas

    2004-12-01

    We review some properties of N=8 gauged supergravity in four dimensions with modified, but AdS invariant boundary conditions on the m2 = -2 scalars. There is a one-parameter class of asymptotic conditions on these fields and the metric components, for which the full AdS symmetry group is preserved. The generators of the asymptotic symmetries are finite, but acquire a contribution from the scalar fields. For a large class of such boundary conditions, we find there exist black holes with scalar hair that are specified by a single conserved charge. Since Schwarschild-AdS is a solution too for all boundary conditions, this provides an example of black hole non-uniqueness. We also show there exist solutions where smooth initial data evolve to a big crunch singularity. This opens up the possibility of using the dual conformal field theory to obtain a fully quantum description of the cosmological singularity, and we report on a preliminary study of this.

  16. Structural, electrochemical characterization and SOD mimic activities of 1D chain or 3D network encouraged by unique μ2-bridging by adipate ion in mixed ligand complexes containing α-diimine as auxiliary ligand

    NASA Astrophysics Data System (ADS)

    Siddiqi, Zafar A.; Sharma, Prashant K.; Shahid, M.; Kumar, Sarvendra; Anjuli; Siddique, Armeen

    The present ternary complexes [Cu(ada)(phen)(H2O)]·2H2O (1), [Co2(ada)2(phen)2(H2O)2] (2) and [{Cu(ada)3(bipy)}n·3nH2O] (3) (H2ada = adipic acid, phen = 1,10-phenanthroline and bipy = 2,2'-bipyridine) obtained under varying experimental conditions were characterized by spectral, electrochemical and thermal studies. The bonding modes and the spatial arrangements of the carboxylate dianion around the metal ions have been investigated employing FTIR, EPR and X-ray crystallographic studies. Present data revealed a six coordinate distorted octahedral geometry for 2 with a = 8.068, b = 9.788, c = 11.788 Å, α = 70.464, β = 75.109, γ = 72.063° and a five coordinate square pyramidal geometry for 3 with a = 9.509, b = 9.912, c = 12.656 Å, α = 70.486, β = 73.604, γ = 75.162°. The superoxide dismutase (SOD) mimic activities of the complexes are in the order 1 > 3 > 2.

  17. Production and characterization of novel starch and poly(butylene adipate-co-terephthalate)-based materials and their applications

    NASA Astrophysics Data System (ADS)

    Stagner, Jacqueline Ann

    This work focuses on the production and characterization of blends of maleated thermoplastic starch (MTPS) and poly(butylenes adipate-co-terephthalate) and their application for use as thermoformed objects, films, and foams. First, by the production and characterization of maleated thermoplastic starch (MTPS) synthesized by reactive extrusion in a twin-screw extruder, a better understanding of MTPS was gained. This reactive thermoplastic starch was prepared with glycerol as the plasticizer, maleic anhydride (MA), and free-radical initiator, 2,5-bis(tert-butylperoxy)-2,5-dimethylhexane (Luperox 101). Dynamic light scattering (DLS), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), soxhlet extraction in acetone, and environmental scanning electron microscopy (ESEM) were performed to determine the effect of maleation, extrusion temperature, initiator concentration, and maleic anhydride concentration on the resulting MTPS. Next, maleated thermoplastic starch (MTPS) and thermoplastic starch (TPS) were reactively blended in a twin-screw extruder with a biodegradable polyester, poly(butylene adipate-co-terephthalate) (PBAT). The blends were extruded to produce thermoformable sheets. The mechanical properties of the sheets were characterized by tensile and puncture tests. Proof of grafting was determined by soxhlet extraction in dichloromethane and FTIR analysis. Observations of the thermal properties were made using DSC, while the surface of the sheets was imaged using ESEM. Blends of MTPS and PBAT were also extruded to produce films. Mechanical testing (tensile and puncture tests) and barrier performance testing (carbon dioxide, oxygen, and water vapor permeability) were performed on the films. Transmission electron microscopy (TEM) was used to image the blends and to view the dispersion of the various phases. Finally, blends of MTPS and PBAT were extruded with an endothermic chemical blowing agent to produce foams. The foams were

  18. Testing and commercialization of byproduct dibasic acids as buffer additives for limestone flue gas desulfurization systems

    SciTech Connect

    Chang, J.C.S.; Mobley, J.D.

    1983-10-01

    Pilot plant (0.1 MW) tests and utility boiler full scale demonstration (194 MW) of byproduct organic dibasic acids (DBA) as buffer additives to limestone scrubbers have shown performance improvements equivalent to those achieved by the addition of pure adipic acid. Both SO/sub 2/ removal efficiency and limestone utilization increased, and no significant operating problems were observed with three of the four DBA tested. Chemical and biological evaluations of scrubber samples taken during the DBA testing indicated no detectable toxicity or mutagenicity, and no significant environmental impact is expected as a result of DBA addition. Economic estimates indicate that substitution of DBA for pure adipic acid as a buffer additive will result in additive cost savings of 30% or greater.

  19. Toughening of biodegradable polylactide/poly(butylene succinate-co-adipate) blends via in situ reactive compatibilization.

    PubMed

    Ojijo, Vincent; Ray, Suprakas Sinha; Sadiku, Rotimi

    2013-05-22

    Polylactide and poly(butylene succinate-co-adipate) (PLA/PBSA) were melt-blended in the presence of triphenyl phosphite (TPP). An increase in the torque during melt mixing was used to monitor the changes in viscosity as compatibilization of the blends occurred. Scanning electron micrographs showed not only a reduction in the dispersed-phase size with increased TPP content but also fibrillated links between the PLA and PBSA phases, signifying compatibilization. Moreover, optimization of parameters such as the mixing sequence and time, TPP content, and PBSA concentration revealed that blends containing 30 and 10 wt % PBSA and 2 wt % TPP, which were processed for 30 min, were optimal in terms of thermomechanical properties. The impact strength increased from 6 kJ/m(2) for PLA to 11 and 16 kJ/m(2) for blends containing 30 and 10 wt % PBSA, respectively, whereas the elongation-at-break increased from 6% for PLA to 20 and 37% for blends containing 30 and 10 wt % PBSA, respectively. Upon compatibilization, the failure mode shifted from the brittle fracture of PLA to ductile deformation, effected by the debonding between the two phases. With improved phase adhesion, compatibilized blends not only were toughened but also did not significantly lose tensile strength and thermal stability.

  20. In vitro dermal absorption of di(2-ethylhexyl) adipate (DEHA) in a roll-on deodorant using human skin.

    PubMed

    Zhou, Simon Ningsun; Moody, Richard P; Aikawa, Bio; Yip, Anna; Wang, Bing; Zhu, Jiping

    2013-01-01

    In vitro dermal absorption experiments were conducted using a roll-on deodorant that contains 1.56% di(2-ethylhexyl) adipate (DEHA), a plasticizer widely used in consumer products. Human skin specimens were fitted in Bronaugh flow-through Teflon diffusion cells. The diffusion cells were maintained at 32 °C to reflect the skin temperature. Two amounts (low dose: 5 mg of the product; high dose: 100 mg) were applied, in triplicate, each on four different human skins. DEHA was determined in the receiver solution at 6-h intervals, using headspace solid-phase microextraction gas chromatography-mass spectrometry (GC-MS). After 24 h, the experiment was terminated and masses of DEHA in the skin depot, skin wash, and upper and lower chambers of the diffusion cell were determined. A significant portion of applied DEHA, 28% in the low amount application and 34% in the high one, was found in the skin depot. In comparison, only 0.04% and 0.002% of applied DEHA were found in the receiver solutions for the low and high doses, respectively. Under our experimental conditions, an apparent steady-state flux of low DEHA mass penetrating from skin into the receiver solution was observed with a penetration rate of 2.2 ng/cm(2)/h for both the low and high doses. The average mass recovery was 81% for the low dose application and 56% for the high dose.

  1. Penetration and intracellular uptake of poly(glycerol-adipate) nanoparticles into three-dimensional brain tumour cell culture models.

    PubMed

    Meng, Weina; Garnett, Martin C; Walker, David A; Parker, Terence L

    2016-03-01

    Nanoparticle (NP) drug delivery systems may potentially enhance the efficacy of therapeutic agents. It is difficult to characterize many important properties of NPs in vivo and therefore attempts have been made to use realistic in vitro multicellular spheroids instead. In this paper, we have evaluated poly(glycerol-adipate) (PGA) NPs as a potential drug carrier for local brain cancer therapy. Various three-dimensional (3-D) cell culture models have been used to investigate the delivery properties of PGA NPs. Tumour cells in 3-D culture showed a much higher level of endocytic uptake of NPs than a mixed normal neonatal brain cell population. Differences in endocytic uptake of NPs in 2-D and 3-D models strongly suggest that it is very important to use in vitro 3-D cell culture models for evaluating this parameter. Tumour penetration of NPs is another important parameter which could be studied in 3-D cell models. The penetration of PGA NPs through 3-D cell culture varied between models, which will therefore require further study to develop useful and realistic in vitro models. Further use of 3-D cell culture models will be of benefit in the future development of new drug delivery systems, particularly for brain cancers which are more difficult to study in vivo.

  2. Engineering E. coli for the biosynthesis of 3-hydroxy-γ-butyrolactone (3HBL) and 3,4-dihydroxybutyric acid (3,4-DHBA) as value-added chemicals from glucose as a sole carbon source.

    PubMed

    Dhamankar, Himanshu; Tarasova, Yekaterina; Martin, Collin H; Prather, Kristala L J

    2014-09-01

    3-hydroxy-γ-butyrolactone (3HBL) is a versatile chiral synthon, deemed a top value-added chemical from biomass by the DOE. We recently reported the first biosynthetic pathway towards 3HBL and its hydrolyzed form, 3,4-dihydroxybutyric acid (3,4-DHBA) in recombinant Escherichia coli using glucose and glycolic acid as feedstocks and briefly described their synthesis solely from glucose. Synthesis from glucose requires integration of the endogenous glyoxylate shunt with the 3,4-DHBA/3HBL pathway and co-overexpression of seven genes, posing challenges with respect to expression, repression of the glyoxylate shunt and optimal carbon distribution between the two pathways. Here we discuss engineering this integration. While appropriate media and over-expression of glyoxylate shunt enzymes helped overcome repression, two orthogonal expression systems were employed to address the expression and carbon distribution challenge. Synthesis of up to 0.3g/L of 3HBL and 0.7g/L of 3,4-DHBA solely from glucose was demonstrated, amounting to 24% of the theoretical maximum.

  3. AdS3: the NHEK generation

    NASA Astrophysics Data System (ADS)

    Bena, Iosif; Heurtier, Lucien; Puhm, Andrea

    2016-05-01

    It was argued in [1] that the five-dimensional near-horizon extremal Kerr (NHEK) geometry can be embedded in String Theory as the infrared region of an infinite family of non-supersymmetric geometries that have D1, D5, momentum and KK monopole charges. We show that there exists a method to embed these geometries into asymptotically- {AdS}_3× {S}^3/{{Z}}_N solutions, and hence to obtain infinite families of flows whose infrared is NHEK. This indicates that the CFT dual to the NHEK geometry is the IR fixed point of a Renormalization Group flow from a known local UV CFT and opens the door to its explicit construction.

  4. AdS2 holographic dictionary

    NASA Astrophysics Data System (ADS)

    Cvetič, Mirjam; Papadimitriou, Ioannis

    2016-12-01

    We construct the holographic dictionary for both running and constant dilaton solutions of the two dimensional Einstein-Maxwell-Dilaton theory that is obtained by a circle reduction from Einstein-Hilbert gravity with negative cosmological constant in three dimensions. This specific model ensures that the dual theory has a well defined ultraviolet completion in terms of a two dimensional conformal field theory, but our results apply qualitatively to a wider class of two dimensional dilaton gravity theories. For each type of solutions we perform holographic renormalization, compute the exact renormalized one-point functions in the presence of arbitrary sources, and derive the asymptotic symmetries and the corresponding conserved charges. In both cases we find that the scalar operator dual to the dilaton plays a crucial role in the description of the dynamics. Its source gives rise to a matter conformal anomaly for the running dilaton solutions, while its expectation value is the only non trivial observable for constant dilaton solutions. The role of this operator has been largely overlooked in the literature. We further show that the only non trivial conserved charges for running dilaton solutions are the mass and the electric charge, while for constant dilaton solutions only the electric charge is non zero. However, by uplifting the solutions to three dimensions we show that constant dilaton solutions can support non trivial extended symmetry algebras, including the one found by Compère, Song and Strominger [1], in agreement with the results of Castro and Song [2]. Finally, we demonstrate that any solution of this specific dilaton gravity model can be uplifted to a family of asymptotically AdS2 × S 2 or conformally AdS2 × S 2 solutions of the STU model in four dimensions, including non extremal black holes. The four dimensional solutions obtained by uplifting the running dilaton solutions coincide with the so called `subtracted geometries', while those obtained

  5. Evaluation of a predictive mathematical model of di-(2-ethylhexyl) adipate plasticizer migration from PVC film into foods.

    PubMed

    Mercer, A; Castle, L; Comyn, J; Gilbert, J

    1990-01-01

    The diffusion coefficient of the plasticizer di-(2-ethylhexyl)adipate (DEHA) in Cheddar cheese (Df) was determined by measuring the extent to which DEHA penetrated cheese that was placed in intimate contact with artificially DEHA-contaminated cheese. Slices (20 microns) of cheese from the boundary layer, into which DEHA had migrated, were microtomed at -40 degrees C, and analyzed for DEHA by gas chromatography (GC). Mean values of Df determined by graph fitting experimental and calculated data were 1.5 x 10(-9) cm2 s-1 at 5 degrees C and 3.0 x 10(-8) cm2 s-1 at 25 degrees C. The partition coefficient (K) of DEHA between cheese and PVC film was derived from the partition coefficients of DEHA between acetonitrile (ACN) and cheese lipid, ACN and cheese solid, and ACN and PVC film. The mean values of K between cheese and PVC film were estimated to be 0.70 at 5 degrees C and 0.58 at 25 degrees C. The estimated values of Df and K were then used in a mathematical model (Till et al. 1982) to predict migration levels of DEHA into cheese. Good agreement with previously published experimental data was obtained. Extrapolation of the prediction of DEHA migration into fatty foods, such as salami and avocado, was also successful (ratio of experimental to predicted results within a factor of two). The values of Df and K for cheese are, however, inappropriate for modelling non-fatty foods such as meat, cakes, fruit and vegetables. Predicted values for these foods were typically 3-10-fold too high. More accurate predictions would probably be obtained if values of Df more relevant to these foods are used. The predictions were relatively insensitive to the value of K.

  6. Comparative Studies on the Mechanical Properties of Nonwoven- and Woven-Flax-Fiber-Reinforced Poly(Butylene Adipate-Co-Terephthalate)-Based Composite Laminates

    NASA Astrophysics Data System (ADS)

    Phongam, N.; Dangtungee, R.; Siengchin, S.

    2015-03-01

    Textile biocomposites made from woven- and nonwoven-flax-fiber-reinforced poly(butylene adipate-co-terephthalate) (PBAT) were prepared by compression molding using the film stacking method, and their tensile strength and stiffness, flexural strength and modulus, and impact strength were determined experimentally. The PBAT-based composites were subjected to water absorption tests. The mechanical properties of pure PBAT and the textile composites were compared, and the influence of flax weave styles on the properties were evaluated. The biocomposite reinforced with 4 × 4-plain weave fibers showed the highest strength and stiffness compared with those of the other textile biocomposites and pure PBAT.

  7. Effects of fish oil and starch added to a diet containing sunflower-seed oil on dairy goat performance, milk fatty acid composition and in vivo delta9-desaturation of [13C]vaccenic acid.

    PubMed

    Bernard, Laurence; Mouriot, Julien; Rouel, Jacques; Glasser, Frédéric; Capitan, Pierre; Pujos-Guillot, Estelle; Chardigny, Jean-Michel; Chilliard, Yves

    2010-08-01

    The potential benefits on human health have prompted an interest in developing nutritional strategies for specifically increasing rumenic acid (RA) in ruminant milk. The aims of the present study were to (i) compare two dietary treatments with lipid supplements on milk yield and composition, (ii) measure the in vivo delta9-desaturation of vaccenic acid (VA) to RA using 13C-labelled VA and (iii) determine the effect of the dietary treatments on this variable. Treatments were 90 g sunflower-seed oil (SO) per d or 60 g sunflower-seed oil and 30 g fish oil per d plus additional starch (SFO), in a grassland hay-based diet given to eight Alpine goats in a 2 x 2 cross-over design with 21 d experimental periods. Milk yield and composition were similar between treatments. Goats fed SFO had higher milk 6 : 0-16 : 0 concentration, lower milk sigmaC18 concentrations and showed no effect on milk VA and RA, compared with SO. At the end of the experiment, intravenous injection of 1.5 g [13C]VA followed by measurements of milk lipid 13C enrichment showed that in vivo 31.7 and 31.6 % of VA was delta9-desaturated into milk RA in the caprine with the SO and SFO treatments, respectively. The expression of genes encoding for delta9-desaturase (or stearoyl-CoA desaturase; SCD1, SCD5) in mammary tissues and four milk delta9-desaturation ratios were similar between treatments. In conclusion, the present study provides the first estimates of in vivo endogenous synthesis of RA (63-73 % of milk RA) from VA in goats, and shows no difference between the two lipid supplements compared.

  8. AD(H)D.

    PubMed

    Harrison, Christopher; Charles, Janice; Britt, Helena

    2008-06-01

    The BEACH program (Bettering the Evaluation and Care of Health) shows that management of attention deficit (hyperactivity) disorder (AD(H)D) was rare in general practice, occurring only six times per 1,000 encounters with children aged 5-17 years, between April 2000 and December 2007. This suggests that general practitioners manage AD(H)D about 46,000 times for this age group nationally each year.

  9. ADS pilot program Plan

    NASA Technical Reports Server (NTRS)

    Clauson, J.; Heuser, J.

    1981-01-01

    The Applications Data Service (ADS) is a system based on an electronic data communications network which will permit scientists to share the data stored in data bases at universities and at government and private installations. It is designed to allow users to readily locate and access high quality, timely data from multiple sources. The ADS Pilot program objectives and the current plans for accomplishing those objectives are described.

  10. Homogeneous vs. heterogeneous nucleation in water-dicarboxylic acid systems

    NASA Astrophysics Data System (ADS)

    Hienola, A. I.; Vehkamäki, H.; Riipinen, I.; Kulmala, M.

    2009-03-01

    Binary heterogeneous nucleation of water-succinic/glutaric/malonic/adipic acid on nanometer-sized particles is investigated within the frame of classical heterogeneous nucleation theory. Homogeneous nucleation is also included for comparison. It is found that the nucleation probabilities depend on the contact angle and on the size of the seed particles. New thermodynamical properties, such as saturation vapor pressure, density and surface tension for all the dicarboxylic acid aqueous solutions are included in the calculations. While the new surface tension and density formulations do not bring any significant difference in the computed nucleation rate for homogeneous nucleation for succinic and glutaric acids, the use of the newly derived equations for the vapor pressure decrease the acid concentrations in gas phase by 3 orders of magnitude. According to our calculations, the binary heterogeneous nucleation of succinic acid-water and glutaric acid-water - although it requires a 3-4 orders of magnitude lower vapor concentrations than the homogeneous nucleation - cannot take place under atmospheric conditions. On the other hand binary homogeneous nucleation of adipic acid-water systems might be possible under conditions occuring in upper boundary layer. However, a more detailed characterization of the interaction between the surface and the molecules of the nucleating vapor should be considered in the future.

  11. Migration of di-(2-ethylhexylexyl)adipate plasticizer from food-grade polyvinyl chloride film into hard and soft cheeses.

    PubMed

    Goulas, A E; Anifantaki, K I; Kolioulis, D G; Kontominas, M G

    2000-08-01

    Food-grade polyvinyl chloride (PVC) film containing 28.3% di-(2-ethylhexylexyl)adipate (DEHA) plasticizer was used to wrap three different types of cheese (Kefalotyri, Edam, and Feta). Samples were split into two groups and stored at 5+/-0.5 degrees C. One group was analyzed for DEHA content at intervals between 1 and 240 h of contact (kinetic study), and a second group was cut into slices (1.2 mm thick) after 240 h of cheese/PVC contact and was analyzed for DEHA content (penetration study). The DEHA was determined by indirect gas chromatography. Statistically significant differences in migration of DEHA were observed between the cheese types. Migration of DEHA depended on contact time, fat, and moisture contents, and consistency of cheese samples. Equilibrium conditions were approached after approximately 100 h of contact for Edam and 150 h for Kefalotyri cheese. Equilibrium conditions were not reached for Feta cheese, even after 240 h of contact. After 240 h of contact under refrigeration, the migration of DEHA was approximately 345.4 mg/kg (18.9 mg/dm2) for Kefalotyri, 222.5 mg/kg (12.2 mg/dm2) for Edam, and 133.9 mg/kg (7.3 mg/dm2) for Feta. The loss of DEHA from the PVC film into the three cheese types was 37.8, 24.3, and 14.6%, respectively. These values, with the exception of Feta, were higher than the upper limit for global migration from plastic packaging materials into food and food stimulants set by the European Union (EU) (10 mg/dm2 or 60 mg/kg). After 240 h of cheese/film contact, DEHA was detected in the first three slices beneath the cheese surface (3.6 mm total depth) of Edam cheese and in the first two slices (2.4 mm total depth) of Kefalotryi and Feta cheeses. DEHA was not detected in subsequent layers. The effect of cheese rind on migration of DEHA was studied in Edam and Kefalotyri cheeses. The DEHA migration after 240 h into the first 1 mm beneath the surface of Kefalotyri cheese was 22.4 mg/kg, while DEHA was not detected in Edam cheese.

  12. Specific migration of di-(2-ethylhexyl)adipate (DEHA) from plasticized PVC film: results from an enforcement campaign.

    PubMed

    Petersen, J H; Breindahl, T

    1998-07-01

    A control campaign on the correct labelling of plasticized PVC film according to current legislation on food contact materials has been performed. Analytical methods based on the isotope dilution technique were developed. For enforcement purposes, the films were exposed to the official food simulant, olive oil, followed by clean-up using size exclusion chromatography and final determination of di-(2-ethylhexyl) adipate (DEHA) by combined capillary gas chromatography and mass spectrometry (GC-MS). In the initial screening, the samples were exposed to the alternative food simulant, isooctane, and DEHA could be determined by GC-MS without further clean-up. A good consistency between results from the two different methods was obtained. During the campaign, 49 samples of PVC films, the majority intended for use in retail shops, were sampled from importers and wholesalers by the Municipal Food Control Units. Initially, all films were screened for the migration into isooctane (exposed 2 h at 40 degrees C) of DEHA and other potentially present low molecular weight plasticizers using full scanning mass spectrometry. Films showing a substantial migration of DEHA were further tested with olive oil according to the declared field of application (exposed for 10 days at 40 degrees C). In 47 of the 49 films the migrate contained a substantial amount of DEHA. In 46 films the migration exceeded the specific migration limit of 3 mg/dm2 after use of the relevant reduction factor given in legislation. However, because of the general uncertainty of the analytical method and because the variation in the thickness of the films was calculated to be 1 mg/dm2, the action limit in this campaign was 4 mg/cm2. A migration higher than this action limit was found in 42 films (89% of the samples) and these films were deemed to be illegal according to their present declared field of application as given by their labelling. In a few cases, some migration of the plasticizer di-n-butyl phthalate was

  13. Adding and Deleting Images

    EPA Pesticide Factsheets

    Images are added via the Drupal WebCMS Editor. Once an image is uploaded onto a page, it is available via the Library and your files. You can edit the metadata, delete the image permanently, and/or replace images on the Files tab.

  14. What Value "Value Added"?

    ERIC Educational Resources Information Center

    Richards, Andrew

    2015-01-01

    Two quantitative measures of school performance are currently used, the average points score (APS) at Key Stage 2 and value-added (VA), which measures the rate of academic improvement between Key Stage 1 and 2. These figures are used by parents and the Office for Standards in Education to make judgements and comparisons. However, simple…

  15. Iron bioavailability from a lipid-based complementary food fortificant mixed with millet porridge can be optimized by adding phytase and ascorbic acid but not by using a mixture of ferrous sulfate and sodium iron EDTA.

    PubMed

    Cercamondi, Colin I; Egli, Ines M; Mitchikpe, Evariste; Tossou, Felicien; Hessou, Joamel; Zeder, Christophe; Hounhouigan, Joseph D; Hurrell, Richard F

    2013-08-01

    Home fortification with lipid-based nutrient supplements (LNSs) is a promising approach to improve bioavailable iron and energy intake of young children in developing countries. To optimize iron bioavailability from an LNS named complementary food fortificant (CFF), 3 stable isotope studies were conducted in 52 young Beninese children. Test meals consisted of millet porridge mixed with CFF and ascorbic acid (AA). Study 1 compared iron absorption from FeSO4-fortifed meals with meals fortified with a mixture of FeSO4 and NaFeEDTA. Study 2 compared iron absorption from FeSO4-fortifed meals without or with extra AA. Study 3 compared iron absorption from FeSO4-fortified meals with meals containing phytase added prior to consumption, once without or once with extra AA. Iron absorption was measured as erythrocyte incorporation of stable isotopes. In study 1, iron absorption from FeSO4 (8.4%) was higher than that from the mixture of NaFeEDTA and FeSO4 (5.9%; P < 0.05). In study 2, the extra AA increased absorption (11.6%) compared with the standard AA concentration (7.3%; P < 0.001). In study 3, absorption from meals containing phytase without or with extra AA (15.8 and 19.9%, respectively) increased compared with meals without phytase (8.0%; P < 0.001). The addition of extra AA to meals containing phytase increased absorption compared with the test meals containing phytase without extra AA (P < 0.05). These findings suggest that phytase and AA, and especially a combination of the two, but not a mixture of FeSO4 and NaFeEDTA would be useful strategies to increase iron bioavailability from a CFF mixed with cereal porridge.

  16. ADS in a Nutshell

    NASA Astrophysics Data System (ADS)

    Demleitner, M.; Eichhorn, G.; Grant, C. S.; Accomazzi, A.; Murray, S. S.; Kurtz, M. J.

    1999-05-01

    The bibliographic databases maintained by the NASA Astrophysics Data System are updated approximately biweekly with records gathered from over 125 sources all over the world. Data are either sent to us electronically, retrieved by our staff via semi-automated procedures, or entered in our databases through supervised OCR procedures. PERL scripts are run on the data to convert them from their incoming format to our standard format so that they can be added to the master database at SAO. Once new data has been added, separate index files are created for authors, objects, title words, and text word, allowing these fields to be searched for individually or in combination with each other. During the indexing procedure, discipline-specific knowledge is taken into account through the use of rule-based procedures performing string normalization, context-sensitive word translation, and synonym and stop word replacement. Once the master text and index files have been updated at SAO, an automated procedure mirrors the changes in the database to the ADS mirror site via a secure network connection. The use of a public domain software tool called rsync allows incremental updating of the database files, with significant savings in the amount of data being transferred. In the past year, the ADS Abstract Service databases have grown by approximately 30%, including 50% growth in Physics, 25% growth in Astronomy and 10% growth in the Instrumentation datasets. The ADS Abstract Service now contains over 1.4 million abstracts (475K in Astronomy, 430K in Physics, 510K in Instrumentation, and 3K in Preprints), 175,000 journal abstracts, and 115,000 full text articles. In addition, we provide links to over 40,000 electronic HTML articles at other sites, 20,000 PDF articles, and 10,000 postscript articles, as well as many links to other external data sources.

  17. Measuring enthalpy of sublimation of volatiles by means of micro-thermogravimetry: the case of Dicarboxylic acids

    NASA Astrophysics Data System (ADS)

    Dirri, F.; Longobardo, A.; Palomba, E.; Zampetti, E.; Biondi, D.; Boccaccini, A.; Saggin, B.; Bearzotti, A.; Macagnano, A.

    2013-09-01

    VISTA (Volatile In Situ Thermogravimetry Analyser) is a thermogravimeter currently under study for the proposed mission MarcoPolo-R [1,2]. In the framework of this project, we developed a set-up to measure the enthalpy of sublimation ΔH of three dicarboxylic acids, i.e. adipic, succinic and oxalic. The obtained results are in good agreement with literature, and this demonstrates the capability of our device to perform this kind of measurements.

  18. Microbial production of value-added nutraceuticals.

    PubMed

    Wang, Jian; Guleria, Sanjay; Koffas, Mattheos A G; Yan, Yajun

    2016-02-01

    Nutraceuticals are important natural bioactive compounds that confer health-promoting and medical benefits to humans. Globally growing demands for value-added nutraceuticals for prevention and treatment of human diseases have rendered nutraceuticals a multi-billion dollar market. However, supply limitations and extraction difficulties from natural sources such as plants, animals or fungi, restrict the large-scale use of nutraceuticals. Metabolic engineering via microbial production platforms has been advanced as an eco-friendly alternative approach for production of value-added nutraceuticals from simple carbon sources. Microbial platforms like the most widely used Escherichia coli and Saccharomyces cerevisiae have been engineered as versatile cell factories for production of diverse and complex value-added chemicals such as phytochemicals, prebiotics, polysaccaharides and poly amino acids. This review highlights the recent progresses in biological production of value-added nutraceuticals via metabolic engineering approaches.

  19. Piezoelectric crystal microbalance measurements of enthalpy of sublimation of C2-C9 dicarboxylic acids

    NASA Astrophysics Data System (ADS)

    Dirri, F.; Palomba, E.; Longobardo, A.; Zampetti, E.

    2016-02-01

    We present here a novel experimental set-up that is able to measure the enthalpy of sublimation of a given compound by means of piezoelectric crystal microbalances (PCMs). The PCM sensors have already been used for space measurements, such as for the detection of organic and non-organic volatile species and refractory materials in planetary environments. In Earth atmospherics applications, PCMs can be also used to obtain some physical-chemical processes concerning the volatile organic compounds (VOCs) present in atmospheric environments. The experimental set-up has been developed and tested on dicarboxylic acids. In this work, a temperature-controlled effusion cell was used to sublimate VOC, creating a molecular flux that was collimated onto a cold PCM. The VOC recondensed onto the PCM quartz crystal, allowing the determination of the deposition rate. From the measurements of deposition rates, it has been possible to infer the enthalpy of sublimation of adipic acid, i.e. ΔHsub : 141.6 ± 0.8 kJ mol-1, succinic acid, i.e. 113.3 ± 1.3 kJ mol-1, oxalic acid, i.e. 62.5 ± 3.1 kJ mol-1, and azelaic acid, i.e. 124.2 ± 1.2 kJ mol-1. The results obtained show an accuracy of 1 % for succinic, adipic, and azelaic acid and within 5 % for oxalic acid and are in very good agreement with previous works (within 6 % for adipic, succinic, and oxalic acid and within 11 % or larger for azelaic acid).

  20. Pyridoxine-dependent seizures caused by alpha amino adipic semialdehyde dehydrogenase deficiency: the first polish case with confirmed biochemical and molecular pathology.

    PubMed

    Kaczorowska, Magdalena; Kmiec, Tomasz; Jakobs, Cornelis; Kacinski, Marek; Kroczka, Slawomir; Salomons, Gajja S; Struys, Eduard A; Jozwiak, Sergiusz

    2008-12-01

    Pyridoxine-dependent seizures are a rare condition recognized when numerous seizures respond to pyridoxine treatment and recur on pyridoxine withdrawal. For decades the diagnosis was confirmed only with pyridoxine treatment withdrawal trial. Recently described biochemical and molecular pathology improved the diagnostic process for those cases in which seizures are caused by alpha amino adipic semialdehyde dehydrogenase deficiency. This article presents a girl with recurrent status epilepticus episodes resistant to phenobarbital and phenytoin and partly responding to midazolam. Eventually the seizures were completely controlled with pyridoxine; however, due to the severe condition of this child when seizing, no trial of withdrawal has been performed. The diagnosis of pyridoxine-dependent seizures was confirmed with biochemical and molecular testing revealing elevated alpha-AASA excretion and the presence of 2 different mutations in the antiquitin ( ALDH7A1) gene. Due to the availability of reliable laboratory testing, confirmation of the diagnosis was made without the life-threatening trial of pyridoxine withdrawal.

  1. Binary blends of poly(butylene adipate-co-terephthalate) and poly(butylene succinate): A new matrix for biocomposites applications

    NASA Astrophysics Data System (ADS)

    Muthuraj, Rajendran; Misra, Manjusri; Mohanty, Amar Kumar

    2015-05-01

    In this study, biodegradable poly(butylene adipate-co-terephthalate) (PBAT) and poly(butylene succinate) (PBS) binary blends were melt compounded. The mechanical, thermal and morphological properties of the PBAT/PBS blends were investigated. The melt compounded binary PBAT/PBS blends showed balanced mechanical properties (especially in tensile strength and elongation) compared to neat components. The obtained melt flow index (MFI) value of the blends is much higher than PBAT. This may be attributed to PBS phase residual catalyst that can induce thermal degradation of the polymers at higher temperature. The toughness of the PBAT is not significantly affected with addition of 40 wt% PBS in the PBAT/PBS blend. This could be the reason of good compatibility achieved between the PBAT and PBS phase in the blends. The phase morphology and spherulite morphology were also correlated with compatibility between the PBAT and PBS in the blends.

  2. Type IV resistant starch increases cecum short chain fatty acids level in rats.

    PubMed

    Le Thanh-Blicharz, Joanna; Anioła, Jacek; Kowalczewski, Przemysław; Przygoński, Krzysztof; Zaborowska, Zofia; Lewandowicz, Grażyna

    2014-01-01

    Resistant starches are type of dietary fibers. However, their physiological effects depend on the way they resist digestion in the gastrointestinal tract. The objective of this study was to examine the hypothesis that new type of RS4 preparations, of in vitro digestibility of about 50%, obtained by cross-linking and acetylation, acts as a prebiotic by increasing short chain fatty acids content in cecum digesta. The rats were fed with diet containing pregelatinized, cross-linked and acetylated starches as a main carbohydrate source. Pregelatinized, but not chemically modified, potato starch was used in the composition of the control diet. After two weeks of experiment the increase of short chain fatty acids contents in ceceum digesta was observed. The intake of starch A, cross-linked only with adipic acid, resulted in increase of about 40% of short chain fatty acids content, whereas starch PA cross-linked with sodium trimetaphosphate and adipic acid of about 50%. The utmost twofold increase was observed in the case of the production of propionic acid. In contrast, the content of butyric acid increased (12%) only as an effect of consumption of starch PA and even decreased (about 30%) in case of starch A. Both RS4 starches caused an increase of the production of acetic acid by more than 40%. No changes in serum biochemistry, liver cholesterol and organ weights of rats were stated.

  3. Supersymmetry of AdS and flat IIB backgrounds

    NASA Astrophysics Data System (ADS)

    Beck, S.; Gutowski, J.; Papadopoulos, G.

    2015-02-01

    We present a systematic description of all warped AdS n × w M 10- n and IIB backgrounds and identify the a priori number of supersymmetries N preserved by these solutions. In particular, we find that the AdS n backgrounds preserve for n ≤ 4 and for 4 < n ≤ 6 supersymmetries and for suitably restricted. In addition under some assumptions required for the applicability of the maximum principle, we demonstrate that the Killing spinors of AdS n backgrounds can be identified with the zero modes of Dirac-like operators on M 10- n establishing a new class of Lichnerowicz type theorems. Furthermore, we adapt some of these results to backgrounds with fluxes by taking the AdS radius to infinity. We find that these backgrounds preserve for 2 < n ≤ 4 and for 4 < n ≤ 7 supersymmetries. We also demonstrate that the Killing spinors of AdS n × w M 10- n do not factorize into Killing spinors on AdS n and Killing spinors on M 10- n .

  4. [Value-Added--Adding Economic Value in the Food Industry].

    ERIC Educational Resources Information Center

    Welch, Mary A., Ed.

    1989-01-01

    This booklet focuses on the economic concept of "value added" to goods and services. A student activity worksheet illustrates how the steps involved in processing food are examples of the concept of value added. The booklet further links food processing to the idea of value added to the Gross National Product (GNP). Discussion questions,…

  5. Water-enhanced solubility of carboxylic acids in organic solvents and its applications to extraction processes

    SciTech Connect

    Starr, J.N.; King, C.J.

    1991-11-01

    The solubilities of carboxylic acids in certain organic solvents increase remarkably with an increasing amount of water in the organic phase. This phenomenon leads to a novel extract regeneration process in which the co-extracted water is selectively removed from an extract, and the carboxylic acid precipitates. This approach is potentially advantageous compared to other regeneration processes because it removes a minor component of the extract in order to achieve a large recovery of acid from the extract. Carboxylic acids of interest include adipic acid, fumaric acid, and succinic acid because of their low to moderate solubilities in organic solvents. Solvents were screened for an increase in acid solubility with increased water concentration in the organic phase. Most Lewis-base solvents were found to exhibit this increased solubility phenomena. Solvents that have a carbonyl functional group showed a very large increase in acid solubility. 71 refs., 52 figs., 38 tabs.

  6. AdS3 Solutions of IIB Supergravity

    SciTech Connect

    Kim, Nakwoo

    2005-12-02

    We consider pure D3-brane configurations of IIB string theory which lead to supergravity solutions containing an AdS3 factor. They can provide new examples of AdS3/CFT2 examples on D3-branes whose worldvolume is partially compactified. When the internal 7 dimensional space is non-compact, they are related to fluctuations of higher dimensional AdS/CFT duality examples, thus dual to the BPS operators of D = 4 superconformal field theories. We find that supersymmetry requires the 7 dimensional space is warped Hopf-fibration of (real) 6 dimensional Kahler manifolds.

  7. Action growth for AdS black holes

    NASA Astrophysics Data System (ADS)

    Cai, Rong-Gen; Ruan, Shan-Ming; Wang, Shao-Jiang; Yang, Run-Qiu; Peng, Rong-Hui

    2016-09-01

    Recently a Complexity-Action (CA) duality conjecture has been proposed, which relates the quantum complexity of a holographic boundary state to the action of a Wheeler-DeWitt (WDW) patch in the anti-de Sitter (AdS) bulk. In this paper we further investigate the duality conjecture for stationary AdS black holes and derive some exact results for the growth rate of action within the Wheeler-DeWitt (WDW) patch at late time approximation, which is supposed to be dual to the growth rate of quantum complexity of holographic state. Based on the results from the general D-dimensional Reissner-Nordström (RN)-AdS black hole, rotating/charged Bañados-Teitelboim-Zanelli (BTZ) black hole, Kerr-AdS black hole and charged Gauss-Bonnet-AdS black hole, we present a universal formula for the action growth expressed in terms of some thermodynamical quantities associated with the outer and inner horizons of the AdS black holes. And we leave the conjecture unchanged that the stationary AdS black hole in Einstein gravity is the fastest computer in nature.

  8. Value Added in English Schools

    ERIC Educational Resources Information Center

    Ray, Andrew; McCormack, Tanya; Evans, Helen

    2009-01-01

    Value-added indicators are now a central part of school accountability in England, and value-added information is routinely used in school improvement at both the national and the local levels. This article describes the value-added models that are being used in the academic year 2007-8 by schools, parents, school inspectors, and other…

  9. Constructing the AdS dual of a Fermi liquid: AdS black holes with Dirac hair

    NASA Astrophysics Data System (ADS)

    Čubrović, Mihailo; Zaanen, Jan; Schalm, Koenraad

    2011-10-01

    We provide evidence that the holographic dual to a strongly coupled charged Fermi liquid has a non-zero fermion density in the bulk. We show that the pole-strength of the stable quasiparticle characterizing the Fermi surface is encoded in the AdS probability density of a single normalizable fermion wavefunction in AdS. Recalling Migdal's theorem which relates the pole strength to the Fermi-Dirac characteristic discontinuity in the number density at ω F , we conclude that the AdS dual of a Fermi liquid is described by occupied on-shell fermionic modes in AdS. Encoding the occupied levels in the total spatially averaged probability density of the fermion field directly, we show that an AdS Reissner-Nordström black holein a theory with charged fermions has a critical temperature, at which the system undergoes a first-order transition to a black hole with a non-vanishing profile for the bulk fermion field. Thermodynamics and spectral analysis support that the solution with non-zero AdS fermion-profile is the preferred ground state at low temperatures.

  10. AdS-Carroll branes

    NASA Astrophysics Data System (ADS)

    Clark, T. E.; ter Veldhuis, T.

    2016-11-01

    Coset methods are used to determine the action of a co-dimension one brane (domain wall) embedded in (d + 1)-dimensional AdS space in the Carroll limit in which the speed of light goes to zero. The action is invariant under the non-linearly realized symmetries of the AdS-Carroll spacetime. The Nambu-Goldstone field exhibits a static spatial distribution for the brane with a time varying momentum density related to the brane's spatial shape as well as the AdS-C geometry. The AdS-C vector field dual theory is obtained.

  11. ADS Based on Linear Accelerators

    NASA Astrophysics Data System (ADS)

    Pan, Weimin; Dai, Jianping

    An accelerator-driven system (ADS), which combines a particle accelerator with a subcritical core, is commonly regarded as a promising device for the transmutation of nuclear waste, as well as a potential scheme for thorium-based energy production. So far the predominant choice of the accelerator for ADS is a superconducting linear accelerator (linac). This article gives a brief overview of ADS based on linacs, including the motivation, principle, challenges and research activities around the world. The status and future plan of the Chinease ADS (C-ADS) project will be highlighted and discussed in depth as an example.

  12. AdS spacetimes from wrapped D3-branes

    NASA Astrophysics Data System (ADS)

    Gauntlett, Jerome P.; MacConamhna, Oisín A. P.

    2007-12-01

    We derive a geometrical characterization of a large class of AdS3 and AdS2 supersymmetric spacetimes in type IIB supergravity with non-vanishing five-form flux using G-structures. These are obtained as special cases of a class of supersymmetric spacetimes with an {{\\bb R}}^{1,1} or {{\\bb R}} (time) factor that are associated with D3 branes wrapping calibrated two or three cycles, respectively, in manifolds with SU(2), SU(3), SU(4) and G2 holonomy. We show how two explicit AdS solutions, previously constructed in gauged supergravity, satisfy our more general G-structure conditions. For each explicit solution, we also derive a special holonomy metric which, although singular, has an appropriate calibrated cycle. After analytic continuation, some of the classes of AdS spacetimes give rise to known classes of BPS bubble solutions with {{\\bb R}}\\times {\\it SO}(4)\\times {\\it SO}(4), {{\\bb R}}\\times {\\it SO}(4)\\times U(1) and {{\\bb R}}\\times {\\it SO}(4) symmetry. These have 1/2, 1/4 and 1/8 supersymmetry, respectively. We present a new class of 1/8 BPS geometries with {{\\bb R}}\\times {\\it SU}(2) symmetry, obtained by analytic continuation of the class of AdS spacetimes associated with D3-brane wrapped on associative three cycles.

  13. Revisiting the thermodynamic relations in AdS /CMT models

    NASA Astrophysics Data System (ADS)

    Hyun, Seungjoon; Park, Sang-A.; Yi, Sang-Heon

    2017-03-01

    Motivated by the recent unified approach to the Smarr-like relation of anti-de Sitter (AdS) planar black holes in conjunction with the quasilocal formalism on conserved charges, we revisit the quantum statistical and thermodynamic relations of hairy AdS planar black holes. By extending the previous results, we identify the hairy contribution in the bulk and show that the holographic computation can be improved so that it is consistent with the bulk computation. We argue that the first law can be retained in its universal form and that the relation between the on-shell renormalized Euclidean action and its free energy interpretation in gravity may also be undeformed even with the hairy contribution in hairy AdS black holes.

  14. Entanglement entropy for free scalar fields in AdS

    NASA Astrophysics Data System (ADS)

    Sugishita, Sotaro

    2016-09-01

    We compute entanglement entropy for free massive scalar fields in anti-de Sitter (AdS) space. The entangling surface is a minimal surface whose boundary is a sphere at the boundary of AdS. The entropy can be evaluated from the thermal free energy of the fields on a topological black hole by using the replica method. In odd-dimensional AdS, exact expressions of the Rényi entropy S n are obtained for arbitrary n. We also evaluate 1-loop corrections coming from the scalar fields to holographic entanglement entropy. Applying the results, we compute the leading difference of entanglement entropy between two holographic CFTs related by a renormalization group flow triggered by a double trace deformation. The difference is proportional to the shift of a central charge under the flow.

  15. Solutions of free higher spins in AdS

    NASA Astrophysics Data System (ADS)

    Lü, H.; Shao, Kai-Nan

    2011-11-01

    We consider free massive and massless higher integer spins in AdS backgrounds in general D dimensions. We obtain the solutions corresponding to the highest-weight state of the spin-ℓ representations of the SO (2 , D - 1) isometry groups. The solution for the spin-ℓ field is expressed recursively in terms of that for the spin- (ℓ - 1). Thus starting from the explicit spin-0, all the higher-spin solutions can be obtained. These solutions allow us to derive the generalized Breitenlohner-Freedman bound, and analyze the asymptotic falloffs. In particular, solutions with negative mass square in general have falloffs slower than those of the Schwarzschild AdS black holes in the AdS boundaries.

  16. Heterogeneous Reaction of HO2 Radical with Dicarboxylic Acid Particles

    NASA Astrophysics Data System (ADS)

    Taketani, F.; Kanaya, Y.

    2010-12-01

    HOx(OH+ HO2) radical plays a central role in the tropospheric chemistry. Recently, the heterogeneous loss of HO2 by aerosol particles is a potentially important HOx sink in the troposphere suggested from observation study. However, there have been few studies for loss of HO2 by aerosols. In this study, we measured the HO2 uptake coefficients for four dicarboxylic acids (succinic acid, glutaric acid, adipic acid, and pimelic acid) aerosol particles under ambient conditions (760Torr and 296K) using an aerosol flow tube(AFT) coupled with a chemical conversion /laser-induced fluorescence(CC/LIF) technique. The CC/LIF technique enabled experiments to be performed at almost the same HO2 radical concentration as that in the atmosphere(-10^8 molecules/cm^3). In this system, the effect of the self-reaction of HO2 in the gas phase can be neglected. HO2 radicals were injected into the AFT through a vertically movable Pyrex tube. Injector position dependent profiles of LIF intensity were measured as a function of aerosol concentration at 30% and 70% of relative humilities (RH). Determined HO2 uptake coefficients by succinic acid, glutaric acid, adipic acid, and pimelic acid aerosol particles at 30% RH were 0.05 +/- 0.02, 0.07 +/- 0.03, 0.02 +/- 0.01, and 0.06 +/- 0.03, respectively, while the uptake coefficients by those particles at 70% RH were 0.13 +/- 0.05, 0.13 +/- 0.03, 0.06 +/- 0.01, and 0.11 +/- 0.03, respectively. These results suggest that compositions and relative humidity are significant to the HO2 uptake. We will discuss the potential HO2 loss processes.

  17. Diffusion and chaos from near AdS2 horizons

    NASA Astrophysics Data System (ADS)

    Blake, Mike; Donos, Aristomenis

    2017-02-01

    We calculate the thermal diffusivity D = κ/c ρ and butterfly velocity v B in holographic models that flow to AdS2 × R d fixed points in the infra-red. We show that both these quantities are governed by the same irrelevant deformation of AdS2 and hence establish a simple relationship between them. When this deformation corresponds to a universal dilaton mode of dimension Δ = 2 then this relationship is always given by D = v B 2 /(2 πT).

  18. Oxidative cleavage with hydrogen peroxide: preparation of polycarboxylic acids from cyclic olefins.

    PubMed

    Fujitani, Kango; Mizutani, Toshihiro; Oida, Tatsuo; Kawase, Tokuzo

    2009-01-01

    Oxidative cleavage of carbon-carbon double bonds of cyclic olefins with hydrogen peroxide in the presence of heteropolyacids has been investigated as a clean and environmentally friendly preparation of polycarboxylic acids. In the presence of 12-tungstophospholic acid (H(3)PW(12)O(40)), adipic acid was obtained in 95% yield from cyclohexene in lipophilic phase and hydrogen peroxide in aqueous phase. In addition, 1,2,3,4-butanetetracarboxylic acid was also obtained in 87% yield from 1,2,3,6-tetrahydrophtharic acid anhydride, while endic acid anhydride did not afford corresponding 2,3,6-cyclopentanetetracarboxylic acid but only lactone compound was obtained. In this oxidation process, oxidative cleavage of carbon-carbon double bonds would proceed as the sequential reactions in which the rate determining step is oxidative cleavage of vicinal-diol compounds.

  19. Anaerobic Fermentation for Production of Carboxylic Acids as Bulk Chemicals from Renewable Biomass.

    PubMed

    Wang, Jufang; Lin, Meng; Xu, Mengmeng; Yang, Shang-Tian

    Biomass represents an abundant carbon-neutral renewable resource which can be converted to bulk chemicals to replace petrochemicals. Carboxylic acids have wide applications in the chemical, food, and pharmaceutical industries. This chapter provides an overview of recent advances and challenges in the industrial production of various types of carboxylic acids, including short-chain fatty acids (acetic, propionic, butyric), hydroxy acids (lactic, 3-hydroxypropionic), dicarboxylic acids (succinic, malic, fumaric, itaconic, adipic, muconic, glucaric), and others (acrylic, citric, gluconic, pyruvic) by anaerobic fermentation. For economic production of these carboxylic acids as bulk chemicals, the fermentation process must have a sufficiently high product titer, productivity and yield, and low impurity acid byproducts to compete with their petrochemical counterparts. System metabolic engineering offers the tools needed to develop novel strains that can meet these process requirements for converting biomass feedstock to the desirable product.

  20. Coset construction of AdS particle dynamics

    NASA Astrophysics Data System (ADS)

    Heinze, Martin; Jorjadze, George; Megrelidze, Luka

    2017-01-01

    We analyze the dynamics of the AdSN+1 particle realized on the coset SO(2, N)/SO (1,N). Hamiltonian reduction provides the physical phase space in terms of the coadjoint orbit obtained by boosting a timelike element of 𝔰𝔬(2, N). We show equivalence of this approach to geometric quantization and to the SO(N) covariant oscillator description, for which the boost generators entail a complicated operator ordering. As an alternative scheme, we introduce dual oscillator variables and derive their algebra at the classical and the quantum levels. This simplifies the calculations of the commutators for the boost generators and leads to unitary irreducible representations of 𝔰𝔬(2, N) for all admissible values of the mass parameter. We furthermore discuss an SO(N) covariant supersymmetric extension of the oscillator quantization, with its realization for superparticles in AdS2 and AdS3 given by recent works.

  1. Entanglement temperature and perturbed AdS3 geometry

    NASA Astrophysics Data System (ADS)

    Levine, G. C.; Caravan, B.

    2016-06-01

    Generalizing the first law of thermodynamics, the increase in entropy density δ S (x ) of a conformal field theory (CFT) is proportional to the increase in energy density, δ E (x ) , of a subsystem divided by a spatially dependent entanglement temperature, TE(x ) , a fixed parameter determined by the geometry of the subsystem, crossing over to thermodynamic temperature at high temperatures. In this paper we derive a generalization of the thermodynamic Clausius relation, showing that deformations of the CFT by marginal operators are associated with spatial temperature variations, δ TE(x ) , and spatial energy correlations play the role of specific heat. Using AdS/CFT duality we develop a relationship between a perturbation in the local entanglement temperature of the CFT and the perturbation of the bulk AdS metric. In two dimensions, we demonstrate a method through which direct diagonalizations of the boundary quantum theory may be used to construct geometric perturbations of AdS3 .

  2. AdS5 backgrounds with 24 supersymmetries

    NASA Astrophysics Data System (ADS)

    Beck, S.; Gutowski, J.; Papadopoulos, G.

    2016-06-01

    We prove a non-existence theorem for smooth AdS 5 solutions with connected, compact without boundary internal space that preserve strictly 24 supersymmetries. In particular, we show that D = 11 supergravity does not admit such solutions, and that all such solutions of IIB supergravity are locally isometric to the AdS 5 × S 5 maximally supersymmetric background. Furthermore, we prove that (massive) IIA supergravity also does not admit such solutions, provided that the homogeneity conjecture for massive IIA supergravity is valid. In the context of AdS/CFT these results imply that if gravitational duals for strictly mathcal{N}=3 superconformal theories in 4-dimensions exist, they are either singular or their internal spaces are not compact.

  3. Role of specific interfacial area in controlling properties of immiscible blends of biodegradable polylactide and poly[(butylene succinate)-co-adipate].

    PubMed

    Ojijo, Vincent; Sinha Ray, Suprakas; Sadiku, Rotimi

    2012-12-01

    Binary blends of two biodegradable polymers: polylactide (PLA), which has high modulus and strength but is brittle, and poly[(butylene succinate)-co-adipate] (PBSA), which is flexible and tough, were prepared through batch melt mixing. The PLA/PBSA compositions were 100/0, 90/10, 70/30, 60/40, 50/50, 40/60, 30/70, 10/90, and 0/100. Fourier-transform infrared measurements revealed the absence of any chemical interaction between the two polymers, resulting in a phase-separated morphology as shown by scanning electron microscopy (SEM). SEM micrographs showed that PLA-rich blends had smaller droplet sizes when compared to the PBSA-rich blends, which got smaller with the reduction in PBSA content due to the differences in their melt viscosities. The interfacial area of PBSA droplets per unit volume of the blend reached a maximum in the 70PLA/30PBSA blend. Thermal stability and mechanical properties were not only affected by the composition of the blend, but also by the interfacial area between the two polymers. Through differential scanning calorimetry, it was shown that molten PBSA enhanced crystallization of PLA while the stiff PLA hindered cold crystallization of PBSA. Optimal synergies of properties between the two polymers were found in the 70PLA/30PBSA blend because of the maximum specific interfacial area of the PBSA droplets.

  4. Effect of nanoclay loading on the thermal and mechanical properties of biodegradable polylactide/poly[(butylene succinate)-co-adipate] blend composites.

    PubMed

    Ojijo, Vincent; Sinha Ray, Suprakas; Sadiku, Rotimi

    2012-05-01

    Polylactide/poly[(butylene succinate)-co-adipate] (PLA/PBSA)-organoclay composites were prepared via melt compounding in a batch mixer. The weight ratio of PLA to PBSA was kept at 70:30, while the weight fraction of the organoclay was varied from 0 to 9%. Small angle X-ray scattering patterns showed slightly better dispersion in PBSA than PLA, and there was a tendency of the silicate layers to delaminate in PBSA at low clay content. Thermal analysis revealed that crystallinity was dependent on the clay content as well its localization within the composite. On the other hand, thermal stability marginally improved for composites with <2 wt % clay content in contrast to the deterioration observed in composites with clay content >2 wt %. Tensile properties showed dependence on clay content and localization. Composite with 2 wt % clay content showed slight improvement in elongation at break. Overall, the optimum property was found for a composite with 2 wt % of the organoclay. This paper therefore has demonstrated the significance of the clay content and localization on the properties of the PLA/PBSA blends.

  5. Investigation on sodium benzoate release from poly(butylene adipate-co-terephthalate)/organoclay/sodium benzoate based nanocomposite film and their antimicrobial activity.

    PubMed

    Mondal, Dibyendu; Bhowmick, Biplab; Maity, Dipanwita; Mollick, Md Masud R; Rana, Dipak; Rangarajan, Vivek; Sen, Ramkrishna; Chattopadhyay, Dipankar

    2015-03-01

    Polymeric nanocomposites embedded with nontoxic antimicrobial agents have recently gained potential industrial significance, mainly for their applicability to preserve food quality and ensure safety. In this study, a poly(butylene adipate-co-terephthalate) (PBAT)/organoclay (CMMT) based nanocomposite film doped with sodium benzoate (SB) as antimicrobial agent was prepared by a solution mixing process. A homogenous dispersion of organoclay (cetyltrimethylammonium-modified montmorillonite [CMMT]) in PBAT matrix was observed by X-ray diffraction and transmission electron microscopy. PBAT/CMMT nanocomposite film showed higher barrier properties against water and methanol vapor compared to the PBAT film. The release of SB from PBAT and its nanocomposite film was measured and the relevant data were fitted to the Weibull model. The higher values of Weibull's shape factor and scale parameter as corroborated by experimental findings indicated faster rate of SB release from PBAT/CMMT/SB nanocomposite film, when compared to the pristine PBAT film. Bacterial inhibition studies were accomplished against 2 food pathogenic bacteria, Bacillus subtilis and Staphylococcus aureus, by determining the zone of inhibition and corresponding growth profiles. Both bacterial inhibition studies and growth profiles established that PBAT/CMMT/SB demonstrated better antimicrobial activity than PBAT/SB film. Therefore, PBAT/CMMT/SB nanocomposite film can be used for food packaging application as it showed good barrier properties and antimicrobial activity against food pathogenic bacteria.

  6. Biomimetic Approach to Enhance Enzymatic Hydrolysis of the Synthetic Polyester Poly(1,4-butylene adipate): Fusing Binding Modules to Esterases.

    PubMed

    Perz, Veronika; Zumstein, Michael Thomas; Sander, Michael; Zitzenbacher, Sabine; Ribitsch, Doris; Guebitz, Georg M

    2015-12-14

    Mimicking a concept of nature for the hydrolysis of biopolymers, the Thermobifida cellulosilytica cutinase 1 (Thc_Cut1) was fused to a polymer binding module (PBM) to enhance the hydrolysis of the polyester poly(1,4-butylene adipate) (PBA). Namely, the binding module of a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (Thc_Cut1_PBM) was attached to the cutinase via two different linker sequences varying in length. In order to investigate the adsorption behavior, catalytically inactive mutants both of Thc_Cut1 and Thc_Cut1_PBM were successfully constructed by site-directed mutagenesis of serine 131 to alanine. Quartz crystal microbalance with dissipation monitoring (QCM-D) analysis revealed that the initial mass increase during enzyme adsorption was larger for the inactive enzymes linked with the PBM as compared to the enzyme without the PBM. The hydrolysis rates of PBA were significantly enhanced when incubated with the active, engineered Thc_Cut1_PBM as compared to the native Thc_Cut1. Thc_Cut1_PBM completely hydrolyzed PBA thin films on QCM-D sensors within approximately 40 min, whereas twice as much time was required for the complete hydrolysis by the native Thc_Cut1.

  7. Effect of Chain-Extenders on the Properties and Hydrolytic Degradation Behavior of the Poly(lactide)/Poly(butylene adipate-co-terephthalate) Blends

    PubMed Central

    Dong, Weifu; Zou, Benshu; Yan, Yangyang; Ma, Piming; Chen, Mingqing

    2013-01-01

    Biodegradable poly(lactide)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were prepared by reactive blending in the presence of chain-extenders. Two chain-extenders with multi-epoxy groups were studied. The effect of chain-extenders on the morphology, mechanical properties, thermal behavior, and hydrolytic degradation of the blends was investigated. The compatibility between the PLA and PBAT was significantly improved by in situ formation of PLA-co-PBAT copolymers in the presence of the chain-extenders, results in an enhanced ductility of the blends, e.g., the elongation at break was increased to 500% without any decrease in the tensile strength. The differential scanning calorimeter (DSC) results reveal that cold crystallization of PLA was enhanced due to heterogeneous nucleation effect of the in situ compatibilized PBAT domains. As known before, PLA is sensitive to hydrolysis and in the presence of PBAT and the chain-extenders, the hydrolytic degradation of the blend was evident. A three-stage hydrolysis mechanism for the system is proposed based on a study of weight loss and molecular weight reduction of the samples and the pH variation of the degradation medium. PMID:24152436

  8. Structure-barrier property relationship of biodegradable poly(butylene succinate) and poly[(butylene succinate)-co-(butylene adipate)] nanocomposites: influence of the rigid amorphous fraction.

    PubMed

    Charlon, S; Marais, S; Dargent, E; Soulestin, J; Sclavons, M; Follain, N

    2015-11-28

    Composites composed of polyesters, poly(butylene succinate) (PBS) or poly[(butylene succinate)-co-(butylene adipate)] (PBSA), and 5 wt% of montmorillonite (CNa) or organo-modified montmorillonite (C30B) were melt-processed and transformed into films by either compression-molding or extrusion-calendering. XRD, rheological measurements and TEM images clearly indicated that films containing CNa are microcomposites, while nanocomposites were observed for those containing C30B. Using Flash DSC, it was possible, for the first time, not only to measure the heat capacity step at the glass transition of these two materials in their amorphous state, but also to investigate whether the preparation technique influenced the Rigid Amorphous Fraction (RAF) in our PBS- and PBSA-based nanocomposites. In this work, we have successfully shown the correlation between the microstructure of the films and their barrier properties, and especially the role played by the RAF. Indeed, the lowest permeabilities to gases and to water were determined in the films containing the highest RAF in both PBS- and PBSA-based materials.

  9. Lorentzian AdS geometries, wormholes, and holography

    SciTech Connect

    Arias, Raul E.; Silva, Guillermo A.; Botta Cantcheff, Marcelo

    2011-03-15

    We investigate the structure of two-point functions for the quantum field theory dual to an asymptotically Lorentzian Anti de Sitter (AdS) wormhole. The bulk geometry is a solution of five-dimensional second-order Einstein-Gauss-Bonnet gravity and causally connects two asymptotically AdS spacetimes. We revisit the Gubser-Klebanov-Polyakov-Witten prescription for computing two-point correlation functions for dual quantum field theories operators O in Lorentzian signature and we propose to express the bulk fields in terms of the independent boundary values {phi}{sub 0}{sup {+-}} at each of the two asymptotic AdS regions; along the way we exhibit how the ambiguity of normalizable modes in the bulk, related to initial and final states, show up in the computations. The independent boundary values are interpreted as sources for dual operators O{sup {+-}} and we argue that, apart from the possibility of entanglement, there exists a coupling between the degrees of freedom living at each boundary. The AdS{sub 1+1} geometry is also discussed in view of its similar boundary structure. Based on the analysis, we propose a very simple geometric criterion to distinguish coupling from entanglement effects among two sets of degrees of freedom associated with each of the disconnected parts of the boundary.

  10. Frozen yogurt with added inulin and isomalt.

    PubMed

    Isik, U; Boyacioglu, D; Capanoglu, E; Erdil, D Nilufer

    2011-04-01

    The objective of this study was to produce a frozen yogurt containing low fat and no added sugar. Samples containing 5% polydextrose, 0.065% aspartame and acesulfame-K mixture, and different levels of inulin and isomalt (5.0, 6.5, and 8.0%) were produced at pilot scale and analyzed for their physical and chemical properties including proximate composition, viscosity, acidity, overrun, melting rate, heat shock stability, as well as sensory characteristics, and viability of lactic acid bacteria. With the addition of inulin and isomalt, viscosity increased by 19 to 52% compared with that of sample B (reduced-fat control). The average calorie values of samples substituted with sweeteners were about 43% lower than that of original sample. Low-calorie frozen yogurt samples melted about 33 to 48% slower than the reduced-fat control sample at 45 min. Based on quantitative descriptive profile test results, statistically significant differences among products were observed for hardness, iciness, foamy melting, whey separation, and sweetness characteristics. The results of principal component analysis showed that the sensory properties of the sample containing 6.5% inulin and 6.5% isomalt were similar to those of control. Lactic acid bacteria counts of frozen yogurt were found to be between 8.12 and 8.49 log values, 3 mo after the production. The overall results showed that it is possible to produce an attractive frozen yogurt product with the incorporation of inulin and isomalt with no added sugar and reduced fat.

  11. Performance of AA5052 alloy anode in alkaline ethylene glycol electrolyte with dicarboxylic acids additives for aluminium-air batteries

    NASA Astrophysics Data System (ADS)

    Wang, DaPeng; Zhang, DaQuan; Lee, KangYong; Gao, LiXin

    2015-11-01

    Dicarboxylic acid compounds, i.e. succinic acid (SUA), adipic acid (ADA) and sebacic acid (SEA), are used as electrolyte additives in the alkaline ethylene glycol solution for AA5052 aluminium-air batteries. It shows that the addition of dicarboxylic acids lowers the hydrogen gas evolution rate of commercial AA5052 aluminium alloy anode. AA5052 aluminium alloy has wide potential window for electrochemical activity and better discharge performance in alkaline ethylene glycol solution containing dicarboxylic acid additives. ADA has the best inhibition effect for the self-corrosion of AA5052 anode among the three dicarboxylic acid additives. Fourier transform infrared spectroscopy (FT-IR) reveals that dicarboxylic acids and aluminium ions can form coordination complexes. Quantum chemical calculations shows that ADA has a smaller energy gap (ΔE, the energy difference between the lowest unoccupied orbital and the highest occupied orbital), indicating that ADA has the strongest interaction with aluminium ions.

  12. A deformation of AdS5 × S5

    NASA Astrophysics Data System (ADS)

    Gauntlett, Jerome P.; Gutowski, Jan B.; Suryanarayana, Nemani V.

    2004-11-01

    We analyse a one-parameter family of supersymmetric solutions of type IIB supergravity that includes AdS5 × S5. For small values of the parameter the solutions are causally well behaved, but beyond a critical value closed timelike curves (CTCs) appear. The solutions are holographically dual to {\\cal N}=4 supersymmetric Yang Mills theory on a non-conformally flat background with non-vanishing R-currents. We compute the holographic energy momentum tensor for the spacetime and show that it remains finite even when the CTCs appear. The solutions, as well as the uplift of some recently discovered AdS5 black-hole solutions, are shown to preserve precisely two supersymmetries.

  13. Supersymmetric AdS_6 solutions of type IIB supergravity

    NASA Astrophysics Data System (ADS)

    Kim, Hyojoong; Kim, Nakwoo; Suh, Minwoo

    2015-10-01

    We study the general requirement for supersymmetric AdS_6 solutions in type IIB supergravity. We employ the Killing spinor technique and study the differential and algebraic relations among various Killing spinor bilinears to find the canonical form of the solutions. Our result agrees precisely with the work of Apruzzi et al. (JHEP 1411:099, 2014), which used the pure spinor technique. Hoping to identify the geometry of the problem, we also computed four-dimensional theory through the dimensional reduction of type IIB supergravity on AdS_6. This effective action is essentially a non-linear sigma model with five scalar fields parametrizing {SL}(3,{R})/{SO}(2,1), modified by a scalar potential and coupled to Einstein gravity in Euclidean signature. We argue that the scalar potential can be explained by a subgroup CSO(1,1,1) subset {SL}(3,{R}) in a way analogous to gauged supergravity.

  14. Universal isolation in the AdS landscape

    NASA Astrophysics Data System (ADS)

    Danielsson, U. H.; Dibitetto, G.; Vargas, S. C.

    2016-12-01

    We study the universal conditions for quantum nonperturbative stability against bubble nucleation for pertubatively stable AdS vacua based on positive energy theorems. We also compare our analysis with the preexisting ones in the literature carried out within the thin-wall approximation. The aforementioned criterion is then tested in two explicit examples describing massive type IIA string theory compactified on S3 and S3×S3, respectively. The AdS landscape of both classes of compactifications is known to consist of a set of isolated points. The main result is that all critical points respecting the Breitenlohner-Freedman (BF) bound also turn out be stable at a nonperturbative level. Finally, we speculate on the possible universal features that may be extracted from the above specific examples.

  15. Tachyon inflation in an AdS braneworld with backreaction

    NASA Astrophysics Data System (ADS)

    Bilić, Neven; Dimitrijevic, Dragoljub D.; Djordjevic, Goran S.; Milosevic, Milan

    2017-02-01

    We analyze the inflationary scenario based on the tachyon field coupled with the radion of the second Randall-Sundrum model (RSII). The tachyon Lagrangian is derived from the dynamics of a 3-brane moving in the five-dimensional bulk. The AdS5 geometry of the bulk is extended to include the radion. Using the Hamiltonian formalism we find four nonlinear field equations supplemented by the modified Friedmann equations of the RSII braneworld cosmology. After a suitable rescaling we reduce the parameters of our model to only one free parameter related to the brane tension and the AdS5 curvature. We solve the equations numerically assuming a reasonably wide range of initial conditions determined by physical considerations. Varying the free parameter and initial conditions we confront our results with the Planck 2015 data.

  16. Ambitwistors, oscillators and massless fields on AdS5

    NASA Astrophysics Data System (ADS)

    Uvarov, D. V.

    2016-11-01

    Positive energy unitary irreducible representations of SU (2 , 2) can be constructed with the aid of bosonic oscillators in (anti)fundamental representation of SU(2)L × SU(2)R that are closely related to Penrose twistors. Starting with the correspondence between the doubleton representations, homogeneous functions on projective twistor space and on-shell generalized Weyl curvature SL (2 , C) spinors and their low-spin counterparts, we study in the similar way the correspondence between the massless representations, homogeneous functions on ambitwistor space and, via the Penrose transform, with the gauge fields on Minkowski boundary of AdS5. The possibilities of reconstructing massless fields on AdS5 and some applications are also discussed.

  17. Effect of dicarboxylic acid chain length on the self-cleaning property of Nano-TiO2-coated cotton fabrics.

    PubMed

    Khajavi, Ramin; Berendjchi, Amirhosein

    2014-11-12

    In this study, the effect of dicarboxylic acid chain length on the amount of TiO2 nanoparticles (TiO2NPs) adsorption-produced self-cleaning property and washing durability on cotton fabrics were investigated. First, cotton fabric samples were treated with three kinds of dicarboxylic acids--oxalic, succinic, and adipic acids--and then dipped in TiO2NP solution with a certain concentration. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was used to investigate bonds formation between dicarboxylic acid groups and hydroxyl groups of cellulose, and a scanning electron microscope (SEM) was applied for the analysis of surface morphology in specimens. Drop absorbency time was determined for samples using the AATCC TM 79:2000. Washing stability and the amount absorption of TiO2NPs were determined by weighing and absorption spectrophotometry procedures, and the stain removal evaluation was conducted to assess the self-cleaning property. Results showed that all of the dicarboxylic acids used in this experiment improved the amount of TiO2NPs absorbed onto cotton samples and their durability to washing. In addition, color variation of samples treated with oxalic acid after 180 min of UV irradiation and drop absorbency time for samples treated with succinic acid were significantly increased by about 126 and 600%, respectively. The best durability was obtained from adipic acid, while a better self-cleaning property was obtained from oxalic acid.

  18. Generalised structures for N=1 AdS backgrounds

    NASA Astrophysics Data System (ADS)

    Coimbra, André; Strickland-Constable, Charles

    2016-11-01

    We expand upon a claim made in a recent paper [arXiv:1411.5721] that generic minimally supersymmetric AdS backgrounds of warped flux compactifications of Type II and M theory can be understood as satisfying a straightforward weak integrability condition in the language of {E}_{d(d)}× {R}+ generalised geometry. Namely, they are spaces admitting a generalised G-structure set by the Killing spinor and with constant singlet generalised intrinsic torsion.

  19. On information loss in AdS3/CFT2

    DOE PAGES

    Fitzpatrick, A. Liam; Kaplan, Jared; Li, Daliang; ...

    2016-05-18

    We discuss information loss from black hole physics in AdS3, focusing on two sharp signatures infecting CFT2 correlators at large central charge c: ‘forbidden singularities’ arising from Euclidean-time periodicity due to the effective Hawking temperature, and late-time exponential decay in the Lorentzian region. We study an infinite class of examples where forbidden singularities can be resolved by non-perturbative effects at finite c, and we show that the resolution has certain universal features that also apply in the general case. Analytically continuing to the Lorentzian regime, we find that the non-perturbative effects that resolve forbidden singularities qualitatively change the behavior ofmore » correlators at times t ~SBH, the black hole entropy. This may resolve the exponential decay of correlators at late times in black hole backgrounds. By Borel resumming the 1/c expansion of exact examples, we explicitly identify ‘information-restoring’ effects from heavy states that should correspond to classical solutions in AdS3. Lastly, our results suggest a line of inquiry towards a more precise formulation of the gravitational path integral in AdS3.« less

  20. Shock Wave Collisions and Thermalization in AdS_5

    NASA Astrophysics Data System (ADS)

    Kovchegov, Y. V.

    We study heavy ion collisions at strong 't Hooft coupling usingAdS/CFT correspondence. According to the AdS/CFT dictionary heavy ion collisions correspond to gravitational shock wave collisions in AdS_5. We construct the metric in the forward light cone after the collision perturbatively through expansion of Einstein equations in graviton exchanges. We obtain an analytic expression for the metric including all-order graviton exchanges with one shock wave, while keeping the exchanges with another shock wave at the lowest order. We read off the corresponding energy-momentum tensor of the produced medium. Unfortunately this energy-momentum tensor does not correspond to ideal hydrodynamics, indicating that higher order graviton exchanges are needed to construct the full solution of the problem. We also show that shock waves must completely stop almost immediately after the collision in AdS_5, which, on the field theory side, corresponds to complete nuclear stopping due to strong coupling effects, likely leading to Landau hydrodynamics. Finally, we perform trapped surface analysis of the shock wave collisions demonstrating that a bulk black hole, corresponding to ideal hydrodynamics on the boundary, has to be created in such collisions, thus constructing a proof of thermalization in heavy ion collisions at strong coupling.

  1. Molecular structures and hydrogen bonding in the crystalline hydrates of two flexible double betaines with different quaternary ammonio groups in the adipic acid skeleton

    NASA Astrophysics Data System (ADS)

    Wu, De-Dong; Mak, Thomas C. W.

    1995-12-01

    Crystalline dihydrates of two flexible double betaines -O 2CCH(R)CH 2CH 2CH(R)CO -2 ( 1, R = Me 3N +, 2, R = C 5H 5N +) have been characterized by single-crystal X-ray analysis. Both compounds crystallize in the monoclinic space group {P2 1}/{c} with a = 7.463(4), b = 10.312(6), c = 9.978(5) Å, β = 90.18(5)°, Z = 2 for 1·2H 2O and a = 9.063(2), b = 7.665(1), c = 11.962(1) Å, β = 94.89(1)°, Z = 2 for 2·2H 2O. Both betaine molecules occupy l¯ sites but differ with regard to the orientation of the carboxylate groups and ammonio groups. In each crystal structure, the formation of donor hydrogen bonds from the water molecules to adjacent carboxylate groups gives rise to an infinte two-dimensional network composed of a packing of identical 26-membered rings.

  2. The generalized added mass revised

    NASA Astrophysics Data System (ADS)

    De Wilde, Juray

    2007-05-01

    The reformulation of the generalized or apparent added mass presented by De Wilde [Phys. Fluids 17, 113304 (2005)] neglects the presence of a drag-type force in the gas and solid phase momentum equations. Reformulating the generalized added mass accounting for the presence of a drag-type force, an apparent drag force appears next to the apparent distribution of the filtered gas phase pressure gradient over the phases already found by De Wilde in the above-cited reference. The reformulation of the generalized added mass and the evaluation of a linear wave propagation speed test then suggest a generalized added mass type closure approach to completely describe filtered gas-solid momentum transfer, that is, including both the filtered drag force and the correlation between the solid volume fraction and the gas phase pressure gradient.

  3. Plasma levels, tissue distribution, and excretion of radioactivity after single-dose administration of (3H)-oleic acid added to D-004, a lipid extract of the fruit of Roystonea regia, in rats

    PubMed Central

    Pérez, L. Yohani; Menéndez, Roberto; Más, Rosa; González, Rosa M.

    2006-01-01

    Background: D-004, a lipid extract of the fruit of Roystonea regia, contains a mixture of fatty acids—mainly oleic, lauric, palmitic, and myristic acids, with oleic acid being among the most abundant—that has been found to reduce the risk for prostatic hyperplasia (PH) induced with testosterone (T) in rats. The pharmacokinetic profile of D-004 has not been reported. Objective: The objective of this study in rats was to assess plasma levels, tissue distribution, and excretion of total radioactivity (TR) after single-dose administration of oral D-004 radiolabeled with (3H)-oleic acid, as a surrogate for the pharmacokinetics of D-004. Methods: This experimental study was conducted at the Pharmacology Department, Center of Natural Products, National Center for Scientific Research, Havana, Cuba. Single doses of suspensions of (3H)-oleic acid 0.16 μCi/mg mixed with D-004 400 mg/kg (radioactive dose/animal 7.2 μCi) were given orally to male Wistar rats weighing 150 to 200 g assigned to the treated or control group. Three rats were euthanized at each of the following times: 0.25, 0.5, 1, 1.5, 2, 4, 8, 24, 48, 72, 96, and 144 hours after study drug administration. After administration, the rats euthanized at the last experimental time point were housed individually in metabolism cages. Urine and feces samples were collected daily. At each time point, blood samples were drawn and plasma samples were obtained using centrifugation. After euthanization, tissue samples (liver, lungs, spleen, brain, kidneys, adipose tissue, muscle, stomach, small and large intestines, adrenal glands, heart, testes, prostate, and seminal vesicles) were quickly removed, washed, blotted, and homogenized. Plasma (100 μL), tissue aliquots (100 mg), feces (10 mg), and urine (100μL) were dissolved and TR was measured. Samples were assayed in duplicate. Results were expressed in μgEq of radio-labeled oleic acid per milliliter of plasma or urine or gram of tissue or feces. Plasma, tissue, feces

  4. AD-1 aircraft in flight

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The Ames-Dryden (AD)-1 was a research aircraft designed to investigate the concept of an oblique (or pivoting) wing. The movie clip runs about 17 seconds and has two air-to-air views of the AD-1. The first shot is from slightly above as the wing pivots to 60 degrees. The other angle is almost directly below the aircraft when the wing is fully pivoted.

  5. Enhancement of mechanical and thermal properties of oil palm empty fruit bunch fiber poly(butylene adipate-co-terephtalate) biocomposites by matrix esterification using succinic anhydride.

    PubMed

    Siyamak, Samira; Ibrahim, Nor Azowa; Abdolmohammadi, Sanaz; Yunus, Wan Md Zin Bin Wan; Rahman, Mohamad Zaki Ab

    2012-02-16

    In this work, the oil palm empty fruit bunch (EFB) fiber was used as a source of lignocellulosic filler to fabricate a novel type of cost effective biodegradable composite, based on the aliphatic aromatic co-polyester poly(butylene adipate-co-terephtalate) PBAT (Ecoflex™), as a fully biodegradable thermoplastic polymer matrix. The aim of this research was to improve the new biocomposites' performance by chemical modification using succinic anhydride (SAH) as a coupling agent in the presence and absence of dicumyl peroxide (DCP) and benzoyl peroxide (BPO) as initiators. For the composite preparation, several blends were prepared with varying ratios of filler and matrix using the melt blending technique. The composites were prepared at various fiber contents of 10, 20, 30, 40 and 50 (wt %) and characterized. The effects of fiber loading and coupling agent loading on the thermal properties of biodegradable polymer composites were evaluated using thermal gravimetric analysis (TGA). Scanning Electron Microscopy (SEM) was used for morphological studies. The chemical structure of the new biocomposites was also analyzed using the Fourier Transform Infrared (FTIR) spectroscopy technique. The PBAT biocomposite reinforced with 40 (wt %) of EFB fiber showed the best mechanical properties compared to the other PBAT/EFB fiber biocomposites. Biocomposite treatment with 4 (wt %) succinic anhydride (SAH) and 1 (wt %) dicumyl peroxide (DCP) improved both tensile and flexural strength as well as tensile and flexural modulus. The FTIR analyses proved the mechanical test results by presenting the evidence of successful esterification using SAH/DCP in the biocomposites' spectra. The SEM micrograph of the tensile fractured surfaces showed the improvement of fiber-matrix adhesion after using SAH. The TGA results showed that chemical modification using SAH/DCP improved the thermal stability of the PBAT/EFB biocomposite.

  6. Effect of fiber esterification on fundamental properties of oil palm empty fruit bunch fiber/poly(butylene adipate-co-terephthalate) biocomposites.

    PubMed

    Siyamak, Samira; Ibrahim, Nor Azowa; Abdolmohammadi, Sanaz; Yunus, Wan Md Zin Wan; Rahman, Mohamad Zaki Ab

    2012-01-01

    A new class of biocomposites based on oil palm empty fruit bunch fiber and poly(butylene adipate-co-terephthalate) (PBAT), which is a biodegradable aliphatic aromatic co-polyester, were prepared using melt blending technique. The composites were prepared at various fiber contents of 10, 20, 30, 40 and 50 wt% and characterized. Chemical treatment of oil palm empty fruit bunch (EFB) fiber was successfully done by grafting succinic anhydride (SAH) onto the EFB fiber surface, and the modified fibers were obtained in two levels of grafting (low and high weight percentage gain, WPG) after 5 and 6 h of grafting. The FTIR characterization showed evidence of successful fiber esterification. The results showed that 40 wt% of fiber loading improved the tensile properties of the biocomposite. The effects of EFB fiber chemical treatments and various organic initiators content on mechanical and thermal properties and water absorption of PBAT/EFB 60/40 wt% biocomposites were also examined. The SAH-g-EFB fiber at low WPG in presence of 1 wt% of dicumyl peroxide (DCP) initiator was found to significantly enhance the tensile and flexural properties as well as water resistance of biocomposite (up to 24%) compared with those of untreated fiber reinforced composites. The thermal behavior of the composites was evaluated from thermogravimetric analysis (TGA)/differential thermogravimetric (DTG) thermograms. It was observed that, the chemical treatment has marginally improved the biocomposites' thermal stability in presence of 1 wt% of dicumyl peroxide at the low WPG level of grafting. The improved fiber-matrix surface enhancement in the chemically treated biocomposite was confirmed by SEM analysis of the tensile fractured specimens.

  7. Migration of di(2-ethylhexyl) adipate and acetyltributyl citrate plasticizers from food-grade PVC film into sweetened sesame paste (halawa tehineh): kinetic and penetration study.

    PubMed

    Goulas, Antonios E; Zygoura, Panagiota; Karatapanis, Andreas; Georgantelis, Dimitris; Kontominas, Michael G

    2007-04-01

    Food-grade polyvinyl chloride (PVC) cling-film containing 5.3% (w/w) di(2-ethylhexyl) adipate (DEHA) and 3.0% (w/w) acetyltributyl citrate (ATBC) plasticizers was used to wrap halawa tehineh (halva) samples. Samples were split into two groups and stored at 25+/-1 degrees C. One group was analyzed for DEHA and ATBC content at intervals between 0.5 and 240h of contact (kinetic study) and a second group was cut into slices (1.5mm thick) after 240h of halva/PVC contact and was analyzed for DEHA and ATBC content (penetration study). Determination of both plasticizers was performed using a direct gas chromatographic (GC) method after extraction of DEHA from halva samples. DEHA readily migrated into halva samples: the equilibrium amount of DEHA in halva (3.31mg/dm(2) film or 81.4mg/kg halva) corresponding to a loss of 54.7% (w/w) DEHA from PVC film. This value is slightly higher than the limit of 3mg/dm(2) of film surface set by the European Union for DEHA. The equilibrium amount of ATBC in halva was 1.46mg/dm(2) (36.1mg/kg) corresponding to a loss of 42.7% ATBC from PVC film. With regard to the penetration of both placticizers into halva samples, migration of DEHA was detectable up to the 7th slice beneath the surface of halva (total depth 10.5mm) while the migration of ATBC was detectable up to the 5th slice (total depth 7.5mm).

  8. Effect of Fiber Esterification on Fundamental Properties of Oil Palm Empty Fruit Bunch Fiber/Poly(butylene adipate-co-terephthalate) Biocomposites

    PubMed Central

    Siyamak, Samira; Ibrahim, Nor Azowa; Abdolmohammadi, Sanaz; Yunus, Wan Md Zin Wan; Rahman, Mohamad Zaki AB

    2012-01-01

    A new class of biocomposites based on oil palm empty fruit bunch fiber and poly(butylene adipate-co-terephthalate) (PBAT), which is a biodegradable aliphatic aromatic co-polyester, were prepared using melt blending technique. The composites were prepared at various fiber contents of 10, 20, 30, 40 and 50 wt% and characterized. Chemical treatment of oil palm empty fruit bunch (EFB) fiber was successfully done by grafting succinic anhydride (SAH) onto the EFB fiber surface, and the modified fibers were obtained in two levels of grafting (low and high weight percentage gain, WPG) after 5 and 6 h of grafting. The FTIR characterization showed evidence of successful fiber esterification. The results showed that 40 wt% of fiber loading improved the tensile properties of the biocomposite. The effects of EFB fiber chemical treatments and various organic initiators content on mechanical and thermal properties and water absorption of PBAT/EFB 60/40 wt% biocomposites were also examined. The SAH-g-EFB fiber at low WPG in presence of 1 wt% of dicumyl peroxide (DCP) initiator was found to significantly enhance the tensile and flexural properties as well as water resistance of biocomposite (up to 24%) compared with those of untreated fiber reinforced composites. The thermal behavior of the composites was evaluated from thermogravimetric analysis (TGA)/differential thermogravimetric (DTG) thermograms. It was observed that, the chemical treatment has marginally improved the biocomposites’ thermal stability in presence of 1 wt% of dicumyl peroxide at the low WPG level of grafting. The improved fiber-matrix surface enhancement in the chemically treated biocomposite was confirmed by SEM analysis of the tensile fractured specimens. PMID:22408394

  9. Ethanol production from acid- and alkali-pretreated corncob by endoglucanase and β-glucosidase co-expressing Saccharomyces cerevisiae subject to the expression of heterologous genes and nutrition added.

    PubMed

    Feng, Chunying; Zou, Shaolan; Liu, Cheng; Yang, Huajun; Zhang, Kun; Ma, Yuanyuan; Hong, Jiefang; Zhang, Minhua

    2016-05-01

    Low-cost technologies to overcome the recalcitrance of cellulose are the key to widespread utilization of lignocellulosic biomass for ethanol production. Efficient enzymatic hydrolysis of cellulose requires the synergism of various cellulases, and the ratios of each cellulase are required to be regulated to achieve the maximum hydrolysis. On the other hand, engineering of cellulolytic Saccharomyces cerevisiae strains is a promising strategy for lignocellulosic ethanol production. The expression of cellulase-encoding genes in yeast would affect the synergism of cellulases and thus the fermentation ability of strains with exogenous enzyme addition. However, such researches are rarely reported. In this study, ten endoglucanase and β-glucosidase co-expressing S. cerevisiae strains were constructed and evaluated by enzyme assay and fermentation performance measurement. The results showed that: (1) maximum ethanol titers of recombinant strains exhibited high variability in YPSC medium (20 g/l peptone, 10 g/l yeast extract, 100 g/l acid- and alkali-pretreated corncob) within 10 days. However, they had relatively little difference in USC medium (100 g/l acid- and alkali-pretreated corncob, 0.33 g/l urea, pH 5.0). (2) Strains 17# and 19#, with ratio (CMCase to β-glucosidase) of 7.04 ± 0.61 and 7.40 ± 0.71 respectively, had the highest fermentation performance in YPSC. However, strains 11# and 3# with the highest titers in USC medium had a higher ratio of CMCase to β-glucosidase, and CMCase activities. These results indicated that nutrition, enzyme activities and the ratio of heterologous enzymes had notable influence on the fermentation ability of cellulase-expressing yeast.

  10. Euclidean and Noetherian entropies in AdS space

    SciTech Connect

    Dutta, Suvankar; Gopakumar, Rajesh

    2006-08-15

    We examine the Euclidean action approach, as well as that of Wald, to the entropy of black holes in asymptotically AdS spaces. From the point of view of holography these two approaches are somewhat complementary in spirit and it is not obvious why they should give the same answer in the presence of arbitrary higher derivative gravity corrections. For the case of the AdS{sub 5} Schwarzschild black hole, we explicitly study the leading correction to the Bekenstein-Hawking entropy in the presence of a variety of higher derivative corrections studied in the literature, including the Type IIB R{sup 4} term. We find a nontrivial agreement between the two approaches in every case. Finally, we give a general way of understanding the equivalence of these two approaches.

  11. New Features in ADS Labs

    NASA Astrophysics Data System (ADS)

    Accomazzi, Alberto; Kurtz, M. J.; Henneken, E. A.; Grant, C. S.; Thompson, D.; Di Milia, G.; Luker, J.; Murray, S. S.

    2013-01-01

    The NASA Astrophysics Data System (ADS) has been working hard on updating its services and interfaces to better support our community's research needs. ADS Labs is a new interface built on the old tried-and-true ADS Abstract Databases, so all of ADS's content is available through it. In this presentation we highlight the new features that have been developed in ADS Labs over the last year: new recommendations, metrics, a citation tool and enhanced fulltext search. ADS Labs has long been providing article-level recommendations based on keyword similarity, co-readership and co-citation analysis of its corpus. We have now introduced personal recommendations, which provide a list of articles to be considered based on a individual user's readership history. A new metrics interface provides a summary of the basic impact indicators for a list of records. These include the total and normalized number of papers, citations, reads, and downloads. Also included are some of the popular indices such as the h, g and i10 index. The citation helper tool allows one to submit a set of records and obtain a list of top 10 papers which cite and/or are cited by papers in the original list (but which are not in it). The process closely resembles the network approach of establishing "friends of friends" via an analysis of the citation network. The full-text search service now covers more than 2.5 million documents, including all the major astronomy journals, as well as physics journals published by Springer, Elsevier, the American Physical Society, the American Geophysical Union, and all of the arXiv eprints. The full-text search interface interface allows users and librarians to dig deep and find words or phrases in the body of the indexed articles. ADS Labs is available at http://adslabs.org

  12. 40 CFR 98.56 - Data reporting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.56 Data reporting requirements. In... emissions from adipic acid production (metric tons). (b) Annual adipic acid production (tons). (c) Annual adipic acid production during which N2O abatement technology (located after the test point) is...

  13. 40 CFR 98.56 - Data reporting requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.56 Data reporting requirements. In... emissions from adipic acid production (metric tons). (b) Annual adipic acid production (tons). (c) Annual adipic acid production during which N2O abatement technology (located after the test point) is...

  14. Heavy quark potential from deformed AdS5 models

    NASA Astrophysics Data System (ADS)

    Zhang, Zi-qiang; Hou, De-fu; Chen, Gang

    2017-04-01

    In this paper, we investigate the heavy quark potential in some holographic QCD models. The calculation relies on a modified renormalization scheme mentioned in a previous work of Albacete et al. After studying the heavy quark potential in Pirner-Galow model and Andreev-Zakharov model, we extend the discussion to a general deformed AdS5 case. It is shown that the obtained potential is negative definite for all quark-antiquark separations, differs from that using the usual renormalization scheme.

  15. The AdS central charge in string theory

    NASA Astrophysics Data System (ADS)

    Troost, Jan

    2011-11-01

    We evaluate the vacuum expectation value of the central charge operator in string theory in an AdS3 vacuum. Our calculation provides a rare non-zero one-point function on a spherical worldsheet. The evaluation involves the regularization both of a worldsheet ultraviolet divergence (associated to the infinite volume of the conformal Killing group), and a space-time infrared divergence (corresponding to the infinite volume of space-time). The two divergences conspire to give a finite result, which is the classical general relativity value for the central charge, corrected in bosonic string theory by an infinite series of tree level higher derivative terms.

  16. Internal structure of charged AdS black holes

    NASA Astrophysics Data System (ADS)

    Bhattacharjee, Srijit; Sarkar, Sudipta; Virmani, Amitabh

    2016-06-01

    When an electrically charged black hole is perturbed, its inner horizon becomes a singularity, often referred to as the Poisson-Israel mass inflation singularity. Ori constructed a model of this phenomenon for asymptotically flat black holes, in which the metric can be determined explicitly in the mass inflation region. In this paper we implement the Ori model for charged AdS black holes. We find that the mass function inflates faster than the flat space case as the inner horizon is approached. Nevertheless, the mass inflation singularity is still a weak singularity: Although spacetime curvature becomes infinite, tidal distortions remain finite on physical objects attempting to cross it.

  17. Microbial production of specialty organic acids from renewable and waste materials.

    PubMed

    Alonso, Saúl; Rendueles, Manuel; Díaz, Mario

    2015-01-01

    Microbial production of organic acids has become a fast-moving field due to the increasing role of these compounds as platform chemicals. In recent years, the portfolio of specialty fermentation-derived carboxylic acids has increased considerably, including the production of glyceric, glucaric, succinic, butyric, xylonic, fumaric, malic, itaconic, lactobionic, propionic and adipic acid through innovative fermentation strategies. This review summarizes recent trends in the use of novel microbial platforms as well as renewable and waste materials for efficient and cost-effective bio-based production of emerging high-value organic acids. Advances in the development of robust and efficient microbial bioprocesses for producing carboxylic acids from low-cost feedstocks are also discussed. The industrial market scenario is also reviewed, including the latest information on the stage of development for producing these emerging bio-products via large-scale fermentation.

  18. Introducing ADS 2.0

    NASA Astrophysics Data System (ADS)

    Accomazzi, Alberto; Kurtz, M. J.; Henneken, E. A.; Grant, C. S.; Thompson, D.; Luker, J.; Chyla, R.; Murray, S. S.

    2014-01-01

    In the spring of 1993, the Smithsonian/NASA Astrophysics Data System (ADS) first launched its bibliographic search system. It was known then as the ADS Abstract Service, a component of the larger Astrophysics Data System effort which had developed an interoperable data system now seen as a precursor of the Virtual Observatory. As a result of the massive technological and sociological changes in the field of scholarly communication, the ADS is now completing the most ambitious technological upgrade in its twenty-year history. Code-named ADS 2.0, the new system features: an IT platform built on web and digital library standards; a new, extensible, industrial strength search engine; a public API with various access control capabilities; a set of applications supporting search, export, visualization, analysis; a collaborative, open source development model; and enhanced indexing of content which includes the full-text of astronomy and physics publications. The changes in the ADS platform affect all aspects of the system and its operations, including: the process through which data and metadata are harvested, curated and indexed; the interface and paradigm used for searching the database; and the follow-up analysis capabilities available to the users. This poster describes the choices behind the technical overhaul of the system, the technology stack used, and the opportunities which the upgrade is providing us with, namely gains in productivity and enhancements in our system capabilities.

  19. Relationship between the effects on bacterial activity of selected disinfectants and the hydrophobic characters of dibasic acid diesters.

    PubMed

    Furuta, T; Kihara, K

    1992-05-01

    We prepared test solutions which contained 80% (v/v) ethanol and 0.2% (w/v) chlorhexidine (CH) or benzalkonium chloride (BC) with or without a dibasic acid diester. After complete evaporation of the ethanol from the solution on filter paper, an overnight broth culture (Staphylococcus aureus) was repeatedly inoculated onto the filter paper, and viable bacterial counts were measured at 5 min after the last inoculation. By comparison with viable counts for CH or BC alone, we estimated the potentiating effects of dibasic acid diester on the bactericidal activity of CH or BC, and confirmed that this activity of the two disinfectants was potentiated in the presence of certain compounds in the homologs of di-n-butyl esters of aliphatic dibasic acid, and di-alkyl esters of adipic and phthalic acid. Diisobutyl adipate, one of the most effective diesters, substantially enhanced the bactericidal activities of benzethonium chloride, cetyl pyridinium chloride and didecyl dimethyl ammonium chloride, as well as CH and BC, but not those of polyhexamethylene biguanide or alkyldiaminoethyl glycinate. The potentiating effects of dibasic acid diesters observed for both CH and BC seemed to be affected by the hydrophobic character of these diesters themselves and are also expressed well by a particular quadratic equation as a function of these characters: namely, capacity factors, as determined by high-performance liquid chromatography.

  20. Primordial fluctuations from complex AdS saddle points

    SciTech Connect

    Hertog, Thomas; Woerd, Ellen van der E-mail: ellen@itf.fys.kuleuven.be

    2016-02-01

    One proposal for dS/CFT is that the Hartle-Hawking (HH) wave function in the large volume limit is equal to the partition function of a Euclidean CFT deformed by various operators. All saddle points defining the semiclassical HH wave function in cosmology have a representation in which their interior geometry is part of a Euclidean AdS domain wall with complex matter fields. We compute the wave functions of scalar and tensor perturbations around homogeneous isotropic complex saddle points, turning on single scalar field matter only. We compare their predictions for the spectra of CMB perturbations with those of a different dS/CFT proposal based on the analytic continuation of inflationary universes to real asymptotically AdS domain walls. We find the predictions of both bulk calculations agree to first order in the slow roll parameters, but there is a difference at higher order which, we argue, is a signature of the HH state of the fluctuations.

  1. Conserved charges in timelike warped AdS3 spaces

    NASA Astrophysics Data System (ADS)

    Donnay, L.; Fernández-Melgarejo, J. J.; Giribet, G.; Goya, A.; Lavia, E.

    2015-06-01

    We consider the timelike version of warped anti-de Sitter space (WAdS), which corresponds to the three-dimensional section of the Gödel solution of four-dimensional cosmological Einstein equations. This geometry presents closed timelike curves (CTCs), which are inherited from its four-dimensional embedding. In three dimensions, this type of solution can be supported without matter provided the graviton acquires mass. Here, among the different ways to consistently give mass to the graviton in three dimensions, we consider the parity-even model known as new massive gravity (NMG). In the bulk of timelike WAdS3 space, we introduce defects that, from the three-dimensional point of view, represent spinning massive particlelike objects. For this type of source, we investigate the definition of quasilocal gravitational energy as seen from infinity, far beyond the region where the CTCs appear. We also consider the covariant formalism applied to NMG to compute the mass and the angular momentum of spinning particlelike defects and compare the result with the one obtained by means of the quasilocal stress tensor. We apply these methods to special limits in which the WAdS3 solutions coincide with locally AdS3 and locally AdS2×R spaces. Finally, we make some comments about the asymptotic symmetry algebra of asymptotically WAdS3 spaces in NMG.

  2. AdS nonlinear instability: moving beyond spherical symmetry

    NASA Astrophysics Data System (ADS)

    Dias, Óscar J. C.; Santos, Jorge E.

    2016-12-01

    Anti-de Sitter (AdS) is conjectured to be nonlinear unstable to a weakly turbulent mechanism that develops a cascade towards high frequencies, leading to black hole formation (Dafermos and Holzegel 2006 Seminar at DAMTP (University of Cambridge) available at https://dpmms.cam.ac.uk/~md384/ADSinstability.pdf, Bizon and Rostworowski 2011 Phys. Rev. Lett. 107 031102). We give evidence that the gravitational sector of perturbations behaves differently from the scalar one studied by Bizon and Rostworowski. In contrast with Bizon and Rostworowski, we find that not all gravitational normal modes of AdS can be nonlinearly extended into periodic horizonless smooth solutions of the Einstein equation. In particular, we show that even seeds with a single normal mode can develop secular resonances, unlike the spherically symmetric scalar field collapse studied by Bizon and Rostworowski. Moreover, if the seed has two normal modes, more than one resonance can be generated at third order, unlike the spherical collapse of Bizon and Rostworowski. We also show that weak turbulent perturbative theory predicts the existence of direct and inverse cascades, with the former dominating the latter for equal energy two-mode seeds.

  3. Strings on AdS wormholes and nonsingular black holes

    NASA Astrophysics Data System (ADS)

    Lü, H.; Vázquez-Poritz, Justin F.; Zhang, Zhibai

    2015-01-01

    Certain AdS black holes in the STU model can be conformally scaled to wormhole and black hole backgrounds which have two asymptotically AdS regions and are completely free of curvature singularities. While there is a delta-function source for the dilaton, classical string probes are not sensitive to this singularity. According to the AdS/CFT correspondence, the dual field theory lives on the union of the disjoint boundaries. For the wormhole background, causal contact exists between the two boundaries and the structure of certain correlation functions is indicative of an interacting phase for which there is a coupling between the degrees of freedom living at each boundary. The nonsingular black hole describes an entangled state in two non-interacting identical conformal field theories. By studying the behavior of open strings on these backgrounds, we extract a number of features of the ‘quarks’ and ‘anti-quarks’ that live in the field theories. In the interacting phase, we find that there is a maximum speed with which the quarks can move without losing energy, beyond which energy is transferred from a quark in one field theory to a quark in the other. We also compute the rate at which moving quarks within entangled states lose energy to the two surrounding plasmas. While a quark-antiquark pair within a single field theory exhibits Coulomb interaction for small separation, a quark in one field theory exhibits spring-like confinement with an anti-quark in the other field theory. For the entangled states, we study how the quark-antiquark screening length depends on temperature and chemical potential.

  4. A triclinic polymorph of hexa-nedioic acid.

    PubMed

    Fun, Hoong-Kun; Chantrapromma, Suchada

    2009-02-28

    Hexane-dioic acid (or adipic acid), C(6)H(10)O(4), crystallizes with two crystallographically independent half-mol-ecules in the asymmetric unit of the triclinic unit cell, space group P, as each mol-ecule lies across a crystallographic inversion centre. A monoclinic polymorph has been reported previously, most recently by Ranganathan, Kulkarni & Rao [J. Phys. Chem. A, (2003), 107, 6073-6081]. The mol-ecules adopt the expected zigzag structure and are linked via centrosymmetric pairs of O-H⋯O hydrogen bonds, forming infinite one-dimensional chains along [011]. These chains are stacked along the a axis. The crystal is further stabilized by weak C-H⋯O inter-actions.

  5. Value Added Products from Renewable Biofuels

    SciTech Connect

    Blum, Paul

    2014-07-31

    Cellulosic ethanol is an emerging biofuel that will make strong contributions to American domestic energy needs. In the US midwest the standard method for pretreatment of biomass uses hot acid to deconstruct lignocellulose. While other methods work, they are not in common use. Therefore it is necessary to work within this context to achieve process improvements and reductions in biofuel cost. Technology underlying this process could supplement and even replace commodity enzymes with engineered microbes to convert biomass-derived lignocellulose feedstocks into biofuels and valueadded chemicals. The approach that was used here was based on consolidated bioprocessing. Thermoacidophilic microbes belonging to the Domain Archaea were evaluated and modfied to promote deconvolution and saccharification of lignocellulose. Biomass pretreatment (hot acid) was combined with fermentation using an extremely thermoacidophilic microbial platform. The identity and fate of released sugars was controlled using metabolic blocks combined with added biochemical traits where needed. LC/MS analysis supported through the newly established Nebraska Bioenergy Facility provided general support for bioenergy researchers at the University of Nebraska. The primary project strategy was to use microbes that naturally flourish in hot acid (thermoacidophiles) with conventional biomass pretreatment that uses hot acid. The specific objectives were: to screen thermoacidophilic taxa for the ability to deconvolute lignocellulose and depolymerize associated carbohydrates; evaluate and respond to formation of “inhibitors” that arose during incubation of lignocellulose under heated acidic conditions; identify and engineer “sugar flux channeling and catabolic blocks” that redirect metabolic pathways to maximize sugar concentrations; expand the hydrolytic capacity of extremely thermoacidophilic microbes through the addition of deconvolution traits; and establish the Nebraska Bioenergy Facility (NBF

  6. Adding Celecoxib With or Without Zoledronic Acid for Hormone-Naïve Prostate Cancer: Long-Term Survival Results From an Adaptive, Multiarm, Multistage, Platform, Randomized Controlled Trial.

    PubMed

    Mason, Malcolm D; Clarke, Noel W; James, Nicholas D; Dearnaley, David P; Spears, Melissa R; Ritchie, Alastair W S; Attard, Gerhardt; Cross, William; Jones, Rob J; Parker, Christopher C; Russell, J Martin; Thalmann, George N; Schiavone, Francesca; Cassoly, Estelle; Matheson, David; Millman, Robin; Rentsch, Cyrill A; Barber, Jim; Gilson, Clare; Ibrahim, Azman; Logue, John; Lydon, Anna; Nikapota, Ashok D; O'Sullivan, Joe M; Porfiri, Emilio; Protheroe, Andrew; Srihari, Narayanan Nair; Tsang, David; Wagstaff, John; Wallace, Jan; Walmsley, Catherine; Parmar, Mahesh K B; Sydes, Matthew R

    2017-03-13

    Purpose Systemic Therapy for Advanced or Metastatic Prostate Cancer: Evaluation of Drug Efficacy is a randomized controlled trial using a multiarm, multistage, platform design. It recruits men with high-risk, locally advanced or metastatic prostate cancer who were initiating long-term hormone therapy. We report survival data for two celecoxib (Cel)-containing comparisons, which stopped accrual early at interim analysis on the basis of failure-free survival. Patients and Methods Standard of care (SOC) was hormone therapy continuously (metastatic) or for ≥ 2 years (nonmetastatic); prostate (± pelvic node) radiotherapy was encouraged for men without metastases. Cel 400 mg was administered twice a day for 1 year. Zoledronic acid (ZA) 4 mg was administered for six 3-weekly cycles, then 4-weekly for 2 years. Stratified random assignment allocated patients 2:1:1 to SOC (control), SOC + Cel, or SOC + ZA + Cel. The primary outcome measure was all-cause mortality. Results were analyzed with Cox proportional hazards and flexible parametric models adjusted for stratification factors. Results A total of 1,245 men were randomly assigned (Oct 2005 to April 2011). Groups were balanced: median age, 65 years; 61% metastatic, 14% N+/X M0, 25% N0M0; 94% newly diagnosed; median prostate-specific antigen, 66 ng/mL. Median follow-up was 69 months. Grade 3 to 5 adverse events were seen in 36% SOC-only, 33% SOC + Cel, and 32% SOC + ZA + Cel patients. There were 303 control arm deaths (83% prostate cancer), and median survival was 66 months. Compared with SOC, the adjusted hazard ratio was 0.98 (95% CI, 0.80 to 1.20; P = .847; median survival, 70 months) for SOC + Cel and 0.86 (95% CI, 0.70 to 1.05; P =.130; median survival, 76 months) for SOC + ZA + Cel. Preplanned subgroup analyses in men with metastatic disease showed a hazard ratio of 0.78 (95% CI, 0.62 to 0.98; P = .033) for SOC + ZA + Cel. Conclusion These data show no overall evidence of improved survival with Cel. Preplanned

  7. Determination of endogenous concentration of γ-hydroxybutyric acid (GHB) in hair through an ad hoc GC-MS analysis: A study on a wide population and influence of gender and age.

    PubMed

    Vaiano, Fabio; Serpelloni, Giovanni; Furlanetto, Sandra; Palumbo, Diego; Mari, Francesco; Fioravanti, Alessia; Bertol, Elisabetta

    2016-01-25

    γ-Hydroxybutyric acid (GHB) spread for recreational purposes or as "rape drug" represents a hard issue for forensic toxicologists due to its endogenous nature. It is clear that an actual and reliable discrimination between basal and exogenous levels is mandatory to achieve a correct evaluation of conscious/unconscious administration. This research aimed to study the GHB baseline in hair samples, collected from 150 volunteers, non-consumers of any drugs of abuse, in order to evaluate if a generic cut-off value could be accepted, also focusing on potential influences of gender and age. The analysis consisted of an overnight incubation with NaOH at 56 °C, liquid-liquid extraction with ethylacetate and trimethylsylil derivatization. Detection was carried out through gas chromatography-mass spectrometry in single ion monitoring (m/z 233, 234, 147 for GHB; m/z 239, 240 and 147 for GHB-d6). The endogenous amount in "blank" hair was estimated by the standard addition method. Concentration range was 0.279-2.839 ng/mg. In males, the average GHB levels were higher than in females (0.829 vs 0.596 ng/mg, respectively), especially in the first age category (<30 years, 1.008 vs 0.606 ng/mg, respectively). Age influences on GHB levels seemed to be different among the two sexes: in male population concentrations were higher <30 (1.008 ng/mg) and similar in the other age ranges (0.762 ng/mg, 30-50; 0.763 ng/mg, >50); in female, quite similar levels were registered throughout all the age categories (0.606 ng/mg, <30; 0.536 ng/mg, 30-50; 0.691 ng/mg, >50). Further study should be performed on GHB physiology in order to better understand these differences among ages and genders. Moreover, we demonstrated that for hair analysis a cut-off reference value is not strictly mandatory, underlining the great interpretative valence of segmental analysis.

  8. Separating Growth from Value Added

    ERIC Educational Resources Information Center

    Yeagley, Raymond

    2007-01-01

    This article discusses Rochester's two academic models that offer different tools for different purposes--measuring individual learning and measuring what affects learning. The main focus of currently available growth measures is formative assessment--providing data to inform instructional planning. Value-added assessment is not a student…

  9. Adding Value to Indiana's Commodities.

    ERIC Educational Resources Information Center

    Welch, Mary A., Ed.

    1995-01-01

    Food processing plants are adding value to bulk and intermediate products to sell overseas. The Asian Pacific Rim economies constituted the largest market for consumer food products in 1993. This shift toward consumer food imports in this area is due to more women working outside the home, the internationalization of populations, and dramatic…

  10. Courtship American Style: Newspaper Ads

    ERIC Educational Resources Information Center

    Cameron, Catherine; And Others

    1977-01-01

    This study investigated an increasing social phenomenon--newspaper advertising for dating or marital partners--in terms of the bargaining process involved. Content analysis of personal ads in a popular "respectable" singles newspaper revealed a pattern of offers and requests reminiscent of a heterosexual stock market. (Author)

  11. Study on dicarboxylic acids in aerosol samples with capillary electrophoresis.

    PubMed

    Adler, Heidi; Sirén, Heli

    2014-01-01

    The research was performed to study the simultaneous detection of a homologous series of α , ω -dicarboxylic acids (C2-C10), oxalic, malonic, succinic, glutaric, adipic, pimelic, suberic, azelaic, and sebacic acids, with capillary electrophoresis using indirect UV detection. Good separation efficiency in 2,6-pyridinedicarboxylic acid as background electrolyte modified with myristyl trimethyl ammonium bromide was obtained. The dicarboxylic acids were ionised and separated within five minutes. For the study, authentic samples were collected onto dry cellulose membrane filters of a cascade impactor (12 stages) from outdoor spring aerosols in an urban area. Hot water and ultrasonication extraction methods were used to isolate the acids from membrane filters. Due to the low concentrations of acids in the aerosols, the extracts were concentrated with solid-phase extraction (SPE) before determination. The enrichment of the carboxylic acids was between 86 and 134% with sample pretreatment followed by 100-time increase by preparation of the sample to 50  μ L. Inaccuracy was optimised for all the sample processing steps. The aerosols contained dicarboxylic acids C2-C10. Then, mostly they contained C2, C5, and C10. Only one sample contained succinic acid. In the study, the concentrations of the acids in aerosols were lower than 10 ng/m(3).

  12. An investigation of AdS2 backreaction and holography

    NASA Astrophysics Data System (ADS)

    Engelsöy, Julius; Mertens, Thomas G.; Verlinde, Herman

    2016-07-01

    We investigate a dilaton gravity model in AdS2 proposed by Almheiri and Polchinski [1] and develop a 1d effective description in terms of a dynamical boundary time with a Schwarzian derivative action. We show that the effective model is equivalent to a 1d version of Liouville theory, and investigate its dynamics and symmetries via a standard canonical framework. We include the coupling to arbitrary conformal matter and analyze the effective action in the presence of possible sources. We compute commutators of local operators at large time separation, and match the result with the time shift due to a gravitational shockwave interaction. We study a black hole evaporation process and comment on the role of entropy in this model.

  13. Supersymmetry Properties of AdS Supergravity Backgrounds

    NASA Astrophysics Data System (ADS)

    Beck, Samuel; Gutowski, Jan; Papadopoulos, George

    2017-01-01

    Anti-de Sitter supergravity backgrounds are of particular interest in light of the AdS/CFT correspondence, which relates them to dual conformal field theories on the boundary of the anti-de Sitter space. We have investigated the forms of the supersymmetries these backgrounds preserve by solving the Killing spinor equations on the anti-de Sitter components of these spaces. We have found that a supersymmetric AdSn background necessarily preserves 2⌊n/2⌋ k supersymmetries for n <= 4 and 2 ⌊n/2 ⌋ + 1 k supersymmetries for 4 < n <= 7 , k ∈N> 0 . Additionally, we have found that the Killing spinors of each background are exactly the zeroes of a Dirac-like operator constructed from the Killing spinor equations.

  14. The Massive Wave Equation in Asymptotically AdS Spacetimes

    NASA Astrophysics Data System (ADS)

    Warnick, C. M.

    2013-07-01

    We consider the massive wave equation on asymptotically AdS spaces. We show that the timelike F behaves like a finite timelike boundary, on which one may impose the equivalent of Dirichlet, Neumann or Robin conditions for a range of (negative) mass parameter which includes the conformally coupled case. We demonstrate well posedness for the associated initial-boundary value problems at the H 1 level of regularity. We also prove that higher regularity may be obtained, together with an asymptotic expansion for the field near F. The proofs rely on energy methods, tailored to the modified energy introduced by Breitenlohner and Freedman. We do not assume the spacetime is stationary, nor that the wave equation separates.

  15. On jordanian deformations of AdS5 and supergravity

    NASA Astrophysics Data System (ADS)

    Hoare, Ben; van Tongeren, Stijn J.

    2016-10-01

    We consider various homogeneous Yang-Baxter deformations of the {{AdS}}5× {{{S}}}5 superstring that can be obtained from the η-deformed superstring and related models by singular boosts. The jordanian deformations we obtain in this way behave similarly to the η-deformed model with regard to supergravity: T dualizing the classical sigma model it is possible to find corresponding solutions of supergravity, which, however, have dilatons that prevent T dualizing back. Hence the backgrounds of these jordanian deformations are not solutions of supergravity. Still, they do satisfy a set of recently found modified supergravity equations which implies that the corresponding sigma models are scale invariant. The abelian models that we obtain by singular boosts do directly correspond to solutions of supergravity. In addition to our main results we consider contraction limits of our main example, which do correspond to supergravity solutions.

  16. Aspects of warped AdS3/CFT2 correspondence

    NASA Astrophysics Data System (ADS)

    Chen, Bin; Zhang, Jia-Ju; Zhang, Jian-Dong; Zhong, De-Liang

    2013-04-01

    In this paper we apply the thermodynamics method to investigate the holographic pictures for the BTZ black hole, the spacelike and the null warped black holes in three-dimensional topologically massive gravity (TMG) and new massive gravity (NMG). Even though there are higher derivative terms in these theories, the thermodynamics method is still effective. It gives consistent results with the ones obtained by using asymptotical symmetry group (ASG) analysis. In doing the ASG analysis we develop a brute-force realization of the Barnich-Brandt-Compere formalism with Mathematica code, which also allows us to calculate the masses and the angular momenta of the black holes. In particular, we propose the warped AdS3/CFT2 correspondence in the new massive gravity, which states that quantum gravity in the warped spacetime could holographically dual to a two-dimensional CFT with {c_R}={c_L}=24 /{Gm{β^2√{{2( {21-4{β^2}} )}}}}.

  17. Systematics of Coupling Flows in AdS Backgrounds

    SciTech Connect

    Goldberger, Walter D.; Rothstein, Ira Z.

    2003-03-18

    We give an effective field theory derivation, based on the running of Planck brane gauge correlators, of the large logarithms that arise in the predictions for low energy gauge couplings in compactified AdS}_5 backgrounds, including the one-loop effects of bulk scalars, fermions, and gauge bosons. In contrast to the case of charged scalars coupled to Abelian gauge fields that has been considered previously in the literature, the one-loop corrections are not dominated by a single 4D Kaluza-Klein mode. Nevertheless, in the case of gauge field loops, the amplitudes can be reorganized into a leading logarithmic contribution that is identical to the running in 4D non-Abelian gauge theory, and a term which is not logarithmically enhanced and is analogous to a two-loop effect in 4D. In a warped GUT model broken by the Higgs mechanism in the bulk,we show that the matching scale that appears in the large logarithms induced by the non-Abelian gauge fields is m_{XY}^2/k where m_{XY} is the bulk mass of the XY bosons and k is the AdS curvature. This is in contrast to the UV scale in the logarithmic contributions of scalars, which is simply the bulk mass m. Our results are summarized in a set of simple rules that can be applied to compute the leading logarithmic predictions for coupling constant relations within a given warped GUT model. We present results for both bulk Higgs and boundary breaking of the GUT gauge

  18. Holography beyond conformal invariance and AdS isometry?

    SciTech Connect

    Barvinsky, A. O.

    2015-03-15

    We suggest that the principle of holographic duality be extended beyond conformal invariance and AdS isometry. Such an extension is based on a special relation between functional determinants of the operators acting in the bulk and on its boundary, provided that the boundary operator represents the inverse propagators of the theory induced on the boundary by the Dirichlet boundary value problem in the bulk spacetime. This relation holds for operators of a general spin-tensor structure on generic manifolds with boundaries irrespective of their background geometry and conformal invariance, and it apparently underlies numerous O(N{sup 0}) tests of the AdS/CFT correspondence, based on direct calculation of the bulk and boundary partition functions, Casimir energies, and conformal anomalies. The generalized holographic duality is discussed within the concept of the “double-trace” deformation of the boundary theory, which is responsible in the case of large-N CFT coupled to the tower of higher-spin gauge fields for the renormalization group flow between infrared and ultraviolet fixed points. Potential extension of this method beyond the one-loop order is also briefly discussed.

  19. Water-enhanced solubility of carboxylic acids in organic solvents and its application to extraction processes

    SciTech Connect

    Starr, J.N. ); King, C.J. )

    1992-11-01

    This paper reports on solubilities of carboxylic acids in certain organic solvents which increase sharply as the concentration of water in the solvent increases. This phenomenon leads to a method of regeneration for solvent-extraction processes whereby coextracted water is selectively removed from the extract, such as by stripping, thereby precipitating the acid. The removal of a minor constituent to cause precipitation reduces energy consumption, in contrast with bulk removal of solvent. Solubilities of fumaric acid were measured in a number of organic solvents, with varying amounts of water in the organic phase. Cyclohexanone and methylcyclohexanone were chosen as solvents for which detailed solid-liquid and liquid-liquid equilibria were measured for adipic, fumaric, and succinic acids in the presence of varying concentrations of water, at both 25 and 45[degrees]C. Batch precipitation experiments were performed to demonstrate the processing concept and determine the relative volatility of water to solvent in the presence of carbon.

  20. Realizing "value-added" metrology

    NASA Astrophysics Data System (ADS)

    Bunday, Benjamin; Lipscomb, Pete; Allgair, John; Patel, Dilip; Caldwell, Mark; Solecky, Eric; Archie, Chas; Morningstar, Jennifer; Rice, Bryan J.; Singh, Bhanwar; Cain, Jason; Emami, Iraj; Banke, Bill, Jr.; Herrera, Alfredo; Ukraintsev, Vladamir; Schlessinger, Jerry; Ritchison, Jeff

    2007-03-01

    The conventional premise that metrology is a "non-value-added necessary evil" is a misleading and dangerous assertion, which must be viewed as obsolete thinking. Many metrology applications are key enablers to traditionally labeled "value-added" processing steps in lithography and etch, such that they can be considered integral parts of the processes. Various key trends in modern, state-of-the-art processing such as optical proximity correction (OPC), design for manufacturability (DFM), and advanced process control (APC) are based, at their hearts, on the assumption of fine-tuned metrology, in terms of uncertainty and accuracy. These trends are vehicles where metrology thus has large opportunities to create value through the engineering of tight and targetable process distributions. Such distributions make possible predictability in speed-sorts and in other parameters, which results in high-end product. Additionally, significant reliance has also been placed on defect metrology to predict, improve, and reduce yield variability. The necessary quality metrology is strongly influenced by not only the choice of equipment, but also the quality application of these tools in a production environment. The ultimate value added by metrology is a result of quality tools run by a quality metrology team using quality practices. This paper will explore the relationships among present and future trends and challenges in metrology, including equipment, key applications, and metrology deployment in the manufacturing flow. Of key importance are metrology personnel, with their expertise, practices, and metrics in achieving and maintaining the required level of metrology performance, including where precision, matching, and accuracy fit into these considerations. The value of metrology will be demonstrated to have shifted to "key enabler of large revenues," debunking the out-of-date premise that metrology is "non-value-added." Examples used will be from critical dimension (CD

  1. Scattering States in AdS/CFT

    SciTech Connect

    Fitzpatrick, A.Liam; Kaplan, Jared; /SLAC

    2012-02-14

    We show that suitably regulated multi-trace primary states in large N CFTs behave like 'in' and 'out' scattering states in the flat-space limit of AdS. Their transition matrix elements approach the exact scattering amplitudes for the bulk theory, providing a natural CFT definition of the flat space S-Matrix. We study corrections resulting from the AdS curvature and particle propagation far from the center of AdS, and show that AdS simply provides an IR regulator that disappears in the flat space limit.

  2. Piezoelectric crystal microbalance measurements of enthalpy of sublimation of C2-C9 dicarboxylic acids

    NASA Astrophysics Data System (ADS)

    Dirri, F.; Palomba, E.; Longobardo, A.; Zampetti, E.

    2015-07-01

    We present here a novel experimental setup able to measure the enthalpy of sublimation of a given compound by means of Piezoelectric Crystal Microbalances (PCM). This experiment was performed in the TG-Lab facility in IAPS-INAF, dedicated to the development of TGA sensors for space measurements, such as detection of organic and non-organic volatile species and refractory materials in planetary environments. In order to study physical-chemical processes concerning the Volatile Organic Compounds (VOC) present in atmospheric environments, the setup has been tested on Dicarboxylic acids. Acids with low molecular weight are among the components of organic fraction of particulate matter in the atmosphere, coming from different sources (biogenic and anthropogenic). Considering their relative abundance, it is useful to consider Dicarboxylic acid as "markers" to define the biogenic or anthropogenic origin of the aerosol, thus obtaining some information of the emission sources. In this work, a temperature controlled effusion cell was used to sublimate VOC, creating a molecular flux that was collimated onto a cold PCM. The VOC re-condensed onto the PCM quartz crystal allowing the determination of the deposition rate. From the measurements of deposition rates, it was possible to infer the enthalpy of sublimation of Adipic acid, i.e. Δ Hsub: 141.6 ± 0.8 kJ mol-1, Succinic acid, i.e. 113.3 ± 1.3 kJ mol-1, Oxalic acid, i.e. 62.5 ± 3.1 kJ mol-1 and Azelaic acid, i.e. 124.2 ± 1.2 kJ mol-1 (weight average values). The results obtained are in very good agreement with literature within 10 % for the Adipic, Succinic and Oxalic acid.

  3. Effect of Adding on the Critical Current Density and Lateral Levitation Force of Bulk

    NASA Astrophysics Data System (ADS)

    Savaşkan, B.; Koparan, E. Taylan; Güner, S. B.; Çelik, Ş.; Öztürk, K.; Yanmaz, E.

    2015-10-01

    We fabricated malic acid -added bulks by wet mixing and "Two-step solid state reaction method". The effects of adding malic acid on , behaviour and lateral levitation force features of bulk have been investigated. A systematic decrease in the critical temperature with increasing adding level confirms the substitution of C at the B site of . While the 4 wt% sample showed the best of at 4 T and 5 K, 15 wt% sample showed uncompetitive lower critical current density , which ascribes the poor connectivity due to the excessive unsubstituted C distribution at grain boundaries and the presence of high MgO amount. At 24 and 28 K, the 4 and 6 wt% malic-acid-added samples exhibit a higher lateral force than pure sample. Based on the observed values of M- H, ( H) and lateral levitation force , it can be concluded that the 4 wt% malic-acid-added sample is the best of the studied samples.

  4. Stability of charged global AdS4 spacetimes

    NASA Astrophysics Data System (ADS)

    Arias, Raúl; Mas, Javier; Serantes, Alexandre

    2016-09-01

    We study linear and nonlinear stability of asymptotically AdS4 solutions in Einstein-Maxwell-scalar theory. After summarizing the set of static solutions we first examine thermodynamical stability in the grand canonical ensemble and the phase transitions that occur among them. In the second part of the paper we focus on nonlinear stability in the microcanonical ensemble by evolving radial perturbations numerically. We find hints of an instability corner for vanishingly small perturbations of the same kind as the ones present in the uncharged case. Collapses are avoided, instead, if the charge and mass of the perturbations come to close the line of solitons. Finally we examine the soliton solutions. The linear spectrum of normal modes is not resonant and instability turns on at extrema of the mass curve. Linear stability extends to nonlinear stability up to some threshold for the amplitude of the perturbation. Beyond that, the soliton is destroyed and collapses to a hairy black hole. The relative width of this stability band scales down with the charge Q, and does not survive the blow up limit to a planar geometry.

  5. AdS4/CFT3 squashed, stretched and warped

    NASA Astrophysics Data System (ADS)

    Klebanov, Igor R.; Klose, Thomas; Murugan, Arvind

    2009-03-01

    We use group theoretic methods to calculate the spectrum of short multiplets around the extremum of Script N = 8 gauged supergravity potential which possesses Script N = 2 supersymmetry and SU(3) global symmetry. Upon uplifting to M-theory, it describes a warped product of AdS4 and a certain squashed and stretched 7-sphere. We find quantum numbers in agreement with those of the gauge invariant operators in the Script N = 2 superconformal Chern-Simons theory recently proposed to be the dual of this M-theory background. This theory is obtained from the U(N) × U(N) theory through deforming the superpotential by a term quadratic in one of the superfields. To construct this model explicitly, one needs to employ monopole operators whose complete understanding is still lacking. However, for the U(2) × U(2) gauge theory we make a proposal for the form of the monopole operators which has a number of desired properties. In particular, this proposal implies enhanced symmetry of the U(2) × U(2) ABJM theory for k = 1,2; it makes its similarity to and subtle difference from the BLG theory quite explicit.

  6. The ADS All Sky Survey

    NASA Astrophysics Data System (ADS)

    Goodman, Alyssa

    We will create the first interactive sky map of astronomers' understanding of the Universe over time. We will accomplish this goal by turning the NASA Astrophysics Data System (ADS), widely known for its unrivaled value as a literature resource, into a data resource. GIS and GPS systems have made it commonplace to see and explore information about goings-on on Earth in the context of maps and timelines. Our proposal shows an example of a program that lets a user explore which countries have been mentioned in the New York Times, on what dates, and in what kinds of articles. By analogy, the goal of our project is to enable this kind of exploration-on the sky-for the full corpus of astrophysical literature available through ADS. Our group's expertise and collaborations uniquely position us to create this interactive sky map of the literature, which we call the "ADS All-Sky Survey." To create this survey, here are the principal steps we need to follow. First, by analogy to "geotagging," we will "astrotag," the ADS literature. Many "astrotags" effectively already exist, thanks to curation efforts at both CDS and NED. These efforts have created links to "source" positions on the sky associated with each of the millions of articles in the ADS. Our collaboration with ADS and CDS will let us automatically extract astrotags for all existing and future ADS holdings. The new ADS Labs, which our group helps to develop, includes the ability for researchers to filter article search results using a variety of "facets" (e.g. sources, keywords, authors, observatories, etc.). Using only extracted astrotags and facets, we can create functionality like what is described in the Times example above: we can offer a map of the density of positions' "mentions" on the sky, filterable by the properties of those mentions. Using this map, researchers will be able to interactively, visually, discover what regions have been studied for what reasons, at what times, and by whom. Second, where

  7. [Compositions of organic acids in PM10 emission sources in Xiamen urban atmosphere].

    PubMed

    Yang, Bing-Yu; Huang, Xing-Xing; Zheng, An; Liu, Bi-Lian; Wu, Shui-Ping

    2013-01-01

    The possible organic acid emission sources in PM10 in Xiamen urban atmosphere such as cooking, biomass burning, vehicle exhaust and soil/dust were obtained using a re-suspension test chamber. A total of 15 organic acids including dicarboxylic acids, fatty acids and aromatic acids were determined using GC/MS after derivatization with BF3/n-butanol. The results showed that the highest total concentration of 15 organic acids (53%) was found in cooking emission and the average concentration of the sum of linoleic acid and oleic acid was 24% +/- 14%. However, oxalic acid was the most abundant species followed by phthalic acid in gasoline vehicle exhaust. The ratios of adipic to azelaic acid in gasoline combustion emissions were significantly higher than those in other emission sources, which can be used to qualitatively differentiate anthropogenic and biological source of dicarboxylic acids in atmospheric samples. The ratios of malonic to succinic acid in source emissions (except gasoline generator emissions) were lower (0.07-0.44) than ambient PM10 samples (0.61-3.93), which can be used to qualitatively differentiate the primary source and the secondary source of dicarboxylic acids in urban PM10.

  8. [Enantioseparation behavior of chiral stationary phases AD, AS and OD].

    PubMed

    Li, Liqun; Fan, Jun; Zhang, Jing; Chen, Xiaodong; Wang, Tai; He, Jianfeng; Zhang, Weiguang

    2016-01-01

    Over the past decades, HPLC enantioseparation with chiral stationary phases (CSPs) has been widely applied in chiral analysis and preparation of new pharmaceuticals, pesticides, food, etc. Herein, enantioseparation of 20 chiral compounds have been carried out on three polysaccharide-based CSPs (EnantioPak AD, AS and OD) with normal phases by HPLC, separately. The influences of skeletal structure and the kinds of derivative groups on separation behaviors of these CSPs have been studied in detail. As results indicated, except for compound 13, the other compounds were baseline separated on EnantioPak AD, with most of resolution over 2. 0; in addition, better separation for acidic or basic compounds was achieved through adding acidic/basic additives into the mobile phase of hexane-alcohol. For four aromatic alcohols (compounds 13-16), their retention in the EnantioPak AD column showed a weakening tendency with increase of carbon number in side chain group, and the reverse trend of their resolution was observed. Furthermore, EnantioPak AD showed much better separation performance for eight compounds (13-20) than the others. In short, these results have provided some references for further investigation of separation behavior and applications of polysaccharide-based CSPs.

  9. Episodic hypoglycemia with psi-hydroxy fatty acid excretion.

    PubMed

    Colle, E; Mamer, O A; Montgomery, J A; Miller, J D

    1983-02-01

    We present case histories of two young children with episodes of hypoglycemia, elevation of SGOT, low insulin levels, increased urinary excretion of psi-hydroxy fatty acids (5-hydroxyhexanoic, 7-hydroxyoctanoic and 9-hydroxydecanoic), traces of the corresponding psi-ketoacids and elevations of urinary adipic, suberic, and sebacic acids. The ratio of psi-hydroxy fatty acids to 3-hydroxybutyric in the urine of these patients is higher than in patients of similar ages with similar illnesses. These acids persisted while the patients were well. Increased urinary psi-hydroxy fatty acids could be reproduced by a load of medium chain triglycerides without precipitating other clinical symptoms. Three children with hypoglycemia were found not to excrete measurable amounts of these unusual acids while ill. A medium chain triglyceride load in one of these children after recovery failed to elicit psi-hydroxy acid excretion. Small amounts of urinary 5-hydroxyhexanoic acid only were found in two patients with acute Reye's syndrome and in three of five severely ill children with starvation ketonuria. In this last group, no urinary psi-hydroxyacids could be detected after recovery. Normal children do not excrete measurable amounts (less than 1 mg/g creatinine) of these psi-hydroxyacids.

  10. Metabolic Engineering of a Novel Muconic Acid Biosynthesis Pathway via 4-Hydroxybenzoic Acid in Escherichia coli

    PubMed Central

    Sengupta, Sudeshna; Goonewardena, Lakshani; Juturu, Veeresh

    2015-01-01

    cis,cis-Muconic acid (MA) is a commercially important raw material used in pharmaceuticals, functional resins, and agrochemicals. MA is also a potential platform chemical for the production of adipic acid (AA), terephthalic acid, caprolactam, and 1,6-hexanediol. A strain of Escherichia coli K-12, BW25113, was genetically modified, and a novel nonnative metabolic pathway was introduced for the synthesis of MA from glucose. The proposed pathway converted chorismate from the aromatic amino acid pathway to MA via 4-hydroxybenzoic acid (PHB). Three nonnative genes, pobA, aroY, and catA, coding for 4-hydroxybenzoate hydrolyase, protocatechuate decarboxylase, and catechol 1,2-dioxygenase, respectively, were functionally expressed in E. coli to establish the MA biosynthetic pathway. E. coli native genes ubiC, aroFFBR, aroE, and aroL were overexpressed and the genes ptsH, ptsI, crr, and pykF were deleted from the E. coli genome in order to increase the precursors of the proposed MA pathway. The final engineered E. coli strain produced nearly 170 mg/liter of MA from simple carbon sources in shake flask experiments. The proposed pathway was proved to be functionally active, and the strategy can be used for future metabolic engineering efforts for production of MA from renewable sugars. PMID:26362984

  11. Treatment of Fatty Acid Oxidation Disorders

    MedlinePlus

    ... of fatty acid oxidation disorders Treatment of fatty acid oxidation disorders E-mail to a friend Please ... page It's been added to your dashboard . Fatty acid oxidation disorders are rare health conditions that affect ...

  12. The inside outs of AdS3/CFT2: exact AdS wormholes with entangled CFT duals

    NASA Astrophysics Data System (ADS)

    Mandal, Gautam; Sinha, Ritam; Sorokhaibam, Nilakash

    2015-01-01

    We present the complete family of solutions of 3D gravity (Λ < 0) with two asymptotically AdS exterior regions. The solutions are constructed from data at the two boundaries, which correspond to two independent and arbitrary stress tensors T R , , and T L , . The two exteriors are smoothly joined on to an interior region through a regular horizon. We find CFT duals of these geometries which are entangled states of two CFT's. We compute correlators between general operators at the two boundaries and find perfect agreement between CFT and bulk calculations. We calculate and match the CFT entanglement entropy (EE) with the holographic EE which involves geodesics passing through the wormhole. We also compute a holographic, non-equilibrium entropy for the CFT using properties of the regular horizon. The construction of the bulk solutions here uses an exact version of Brown-Henneaux type diffeomorphisms which are asymptotically nontrivial and transform the CFT states by two independent unitary operators on the two sides. Our solutions provide an infinite family of explicit examples of the ER=EPR relation of Maldacena and Susskind [1].

  13. AD, the ALICE diffractive detector

    NASA Astrophysics Data System (ADS)

    Tello, Abraham Villatoro

    2017-03-01

    ALICE is one of the four large experiments at the CERN Large Hadron Collider (LHC). As a complement to its Heavy-Ion physics program, ALICE started during Run 1 of LHC an extensive program dedicated to the study of proton-proton diffractive processes. In order to optimize its trigger efficiencies and purities in selecting diffractive events, the ALICE Collaboration installed a very forward AD detector during the Long Shut Down 1 of LHC. This new forward detector system consists of two stations made of two layers of scintillator pads, one station on each side of the interaction point. With this upgrade, ALICE has substantially increased its forward physics coverage, including the double rapidity gap based selection of central production, as well as the measurements of inclusive diffractive cross sections.

  14. B vitamin supplementation reduces excretion of urinary dicarboxylic acids in autistic children.

    PubMed

    Kałużna-Czaplińska, Joanna; Socha, Ewa; Rynkowski, Jacek

    2011-07-01

    Urinary dicarboxylic acids are an important source of information about metabolism and potential problems especially connected with energy production, intestinal dysbiosis, and nutritional individuality in autistic children. A diet rich in vitamins and macroelements is a new idea of intervention in autism. The objective of the present study was to test the hypothesis that vitamin B2, vitamin B6, and magnesium supplementation is effective in reducing the level of dicarboxylic acids in the urine of autistic children. We examined the levels of succinic, adipic, and suberic acids in the urine of autistic children before and after vitamin supplementation. Thirty children with autism received magnesium (daily dose, 200 mg), vitamin B6 (pyridoxine; daily dose, 500 mg), and vitamin B2 (riboflavin; daily dose, 20 mg). The treatment was provided for a period of 3 months. Organic acids were determined using gas chromatography/mass spectrometry. Before supplementation, the levels of succinic, adipic, and suberic acids in the urine of autistic children were 41.47 ± 50.40 μmol/mmol creatinine, 15.61 ± 15.31 μmol/mmol creatinine, 8.02 ± 6.08 μmol/mmol creatinine; and after supplementation, the levels were 9.90 ± 8.26 μmol/mmol creatinine, 2.92 ± 2.41 μmol/mmol creatinine, and 2.57 ± 3.53 μmol/mmol creatinine, respectively. The results suggest that the supplementation reduces the level of dicarboxylic acid in the urine of autistic children.

  15. Renewable unsaturated polyesters from muconic acid

    DOE PAGES

    Rorrer, Nicholas A.; Dorgan, John R.; Vardon, Derek R.; ...

    2016-09-27

    cis,cis-Muconic acid is an unsaturated dicarboxylic acid that can be produced in high yields via biological conversion of sugars and lignin-derived aromatic compounds. Muconic acid is often targeted as an intermediate to direct replacement monomers such as adipic or terephthalic acid. However, the alkene groups in muconic acid provide incentive for its direct use in polymers, for example, in the synthesis of unsaturated polyester resins. Here, biologically derived muconic acid is incorporated into polyesters via condensation polymerization using the homologous series of poly(ethylene succinate), poly(propylene succinate), poly(butylene succinate), and poly(hexylene succinate). Additionally, dimethyl cis,cis-muconate is synthesized and subsequently incorporated intomore » poly(butylene succinate). NMR measurements demonstrate that alkene bonds are present in the polymer backbones. In all cases, the glass transition temperatures are increased whereas the melting and degradation temperatures are decreased. In the case of poly(butylene succinate), utilization of neat muconic acid yields substoichiometric incorporation consistent with a tapered copolymer structure, whereas the muconate diester exhibits stoichiometric incorporation and a random copolymer structure based on thermal and mechanical properties. Prototypical fiberglass panels were produced by infusing a mixture of low molecular weight poly(butylene succinate-co-muconate) and styrene into a woven glass mat and thermally initiating polymerization resulting in thermoset composites with shear moduli in excess of 30 GPa, a value typical of commercial composites. The increased glass transition temperatures with increasing mucconic incorporation leads to improved composites properties. We find that the molecular tunability of poly(butylene succinate-co-muconate) as a tapered or random copolymer enables the tunability of composite properties. Altogether, this study demonstrates the utility of muconic acid as a

  16. Renewable unsaturated polyesters from muconic acid

    SciTech Connect

    Rorrer, Nicholas A.; Dorgan, John R.; Vardon, Derek R.; Martinez, Chelsea R.; Yang, Yuan; Beckham, Gregg T.

    2016-09-27

    cis,cis-Muconic acid is an unsaturated dicarboxylic acid that can be produced in high yields via biological conversion of sugars and lignin-derived aromatic compounds. Muconic acid is often targeted as an intermediate to direct replacement monomers such as adipic or terephthalic acid. However, the alkene groups in muconic acid provide incentive for its direct use in polymers, for example, in the synthesis of unsaturated polyester resins. Here, biologically derived muconic acid is incorporated into polyesters via condensation polymerization using the homologous series of poly(ethylene succinate), poly(propylene succinate), poly(butylene succinate), and poly(hexylene succinate). Additionally, dimethyl cis,cis-muconate is synthesized and subsequently incorporated into poly(butylene succinate). NMR measurements demonstrate that alkene bonds are present in the polymer backbones. In all cases, the glass transition temperatures are increased whereas the melting and degradation temperatures are decreased. In the case of poly(butylene succinate), utilization of neat muconic acid yields substoichiometric incorporation consistent with a tapered copolymer structure, whereas the muconate diester exhibits stoichiometric incorporation and a random copolymer structure based on thermal and mechanical properties. Prototypical fiberglass panels were produced by infusing a mixture of low molecular weight poly(butylene succinate-co-muconate) and styrene into a woven glass mat and thermally initiating polymerization resulting in thermoset composites with shear moduli in excess of 30 GPa, a value typical of commercial composites. The increased glass transition temperatures with increasing mucconic incorporation leads to improved composites properties. We find that the molecular tunability of poly(butylene succinate-co-muconate) as a tapered or random copolymer enables the tunability of composite properties. Altogether, this study demonstrates the utility of muconic acid as

  17. Resolution of a Challenge for Solvation Modeling: Calculation of Dicarboxylic Acid Dissociation Constants Using Mixed Discrete-Continuum Solvation Models

    SciTech Connect

    Marenich, Aleksandr; Ding, Wendu; Cramer, Christopher J.; Truhlar, Donald G.

    2012-06-07

    First and second dissociation constants (pKa values) of oxalic acid, malonic acid, and adipic acid were computed by using a number of theoretical protocols based on density functional theory and using both continuum solvation models and mixed discrete-continuum solvation models. We show that fully implicit solvation models (in which the entire solvent is represented by a dielectric continuum) fail badly for dicarboxylic acids with mean unsigned errors averaged over six pKa values) of 2.4-9.0 log units, depending on the particular implicit model used. The use of water-solute clusters and accounting for multiple conformations in solution significantly improve the performance of both generalized Born solvation models and models that solve the nonhomogeneous dielectric Poisson equation for bulk electrostatics. The four most successful models have mean unsigned errors of only 0.6-0.8 log units.

  18. Self-assembled nanoparticles based on chondroitin sulfate-deoxycholic acid conjugates for docetaxel delivery: Effect of degree of substitution of deoxycholic acid.

    PubMed

    Liu, Mengrui; Du, Hongliang; Zhai, Guangxi

    2016-10-01

    Hydrophobically-modified polymers based on chondroitin sulfate with different degree of substitution (DS) of deoxycholic acid (DOCA) were developed for docetaxel delivery. Chondroitin sulfate-deoxycholic acid (CSAD) bioconjugates were synthesized via the linker of adipic dihydrazide by amide bond. They were characterized with spherical shape, mean diameter of around 165.2nm and negative zeta potential (-14.87 to -20.53mV). An increase of DOCA DS reduced size of nanoparticles, while increasing drug loading efficiency. Drug release in vitro showed a triphasic sustained pattern and higher accumulative drug release percentage was observed with increased DS of DOCA on polymer. Self-assemblies with higher DS also had enhanced internalization of nanoparticles and stronger cytotoxicity at the cellular level. The self-assemble nanoparticles demonstrate to be excellent targeting drug delivery systems and the desired therapeutics can be achieved via the alteration of DS.

  19. The New York Times ad.

    PubMed

    Hunt, M E; Kissling, F

    1993-01-01

    Feminization of patriarchal institutions is necessary in order to eliminate the exclusivity and mutuality of hierarchical, gender, class, and race stratification. The aim of this paper is to explain the history and activities surrounding the New York Times ad on Sunday, October 7, 1984 (the Catholic Statement on Pluralism and Abortion signed by Barbara Ferraro and Patricia Hussey of the Sisters of Note Dame de Namur, Rose Dominic Trapasso of the Maryknoll Sisters, and 67 other signers). The significance of this ad for Roman Catholic feminists and suggestions for new models of relationships between feminists is given. The Statement was written by Daniel Maguire and Frances Kissling and reviewed by 20 Roman Catholic ethicists. A sponsoring committee of early signers sought other support. Catholics for a Free Choice sponsored the funding for circulation of the Statement among professional societies, but not necessarily canonical communities. Publication of the entire statement in the Times was at the height of the presidential campaign. Conservative Bishops Bernard Law of Boston and John O'Connor of Boston publicly denounced Ferraro's position. The first institutional church response came on November 14, 1984, and stated that the Statement was personal opinion and contradictory to clear and constant church teachings about abortion. On November 30, 1984, Cardinal Jean Jerome Hamer of the Congregation for Religious and Secular Institutes responded to most presidents of canonical communities to request a public retraction from signers under threat of dismissal. The issue was obedience to the church. Several members of the canonical community and priests published retractions; negotiations with the Vatican began. Freedom of conscience and empowerment of canonical communities, as agents of their own lives, were given as reasons for the challenge to paternalism. The response was that women were subject to obedience within their communities and had taken public vows and were

  20. Dicarboxylic acids with limited numbers of hydrocarbons stabilize cell membrane and increase osmotic resistance in rat erythrocytes.

    PubMed

    Mineo, Hitoshi; Amita, Nozomi; Kawawake, Megumi; Higuchi, Ayaka

    2013-11-01

    We examined the effect of dicarboxylic acids having 0 to 6 hydrocarbons and their corresponding monocarboxylic or tricarboxylic acids in changing the osmotic fragility (OF) in rat red blood cells (RBCs). Malonic, succinic, glutaric and adipic acids, which are dicarboxylic acids with 1, 2, 3 and 4 straight hydrocarbons located between two carboxylic groups, decreased the OF in a concentration-dependent manner. Other long-chain dicarboxylic acids did not change the OF in rat RBCs. The benzoic acid derivatives, isophthalic and terephthalic acids, but not phthalic acid, decreased the OF in a concentration-dependent manner. Benzene-1,2,3-tricarboxylic acid, but not benzene-1,3,5-tricarboxylic acid, also decreased the OF in rat RBCs. On the other hand, monocarboxylic acids possessing 2 to 7 straight hydrocarbons and benzoic acid increased the OF in rat RBCs. In short-chain dicarboxylic acids, a limited number of hydrocarbons between the two carboxylic groups are thought to form a V- or U-shaped structure and interact with phospholipids in the RBC membrane. In benzene dicarboxylic and tricarboxylic acids, a part of benzene nucleus between the two carboxylic groups is thought to enter the plasma membrane and act on acyl-chain in phospholipids in the RBC membrane. For dicarboxylic and tricarboxylic acids, limited numbers of hydrocarbons in molecules are speculated to enter the RBC membrane with the hydrophilic carboxylic groups remaining outside, stabilizing the structure of the cell membrane and resulting in an increase in osmotic resistance in rat RBCs.

  1. Value-added products from vegetable oils

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Oxygenated fatty acids are useful as specialty chemicals, plasticizers, and biomedicals. Nocardia cholesterolicum and Flavobacterium DS5 convert oleic acid to 10 hydroxy stearic acid and linoleic acid to 10-hydroxy-12(Z)-octadecanoic acid. Pseudomonas aeruginosa PR3 converts oleic acid to new comp...

  2. Intracellular Signaling and Desmoglein 2 Shedding Triggered by Human Adenoviruses Ad3, Ad14, and Ad14P1

    PubMed Central

    Wang, Hongjie; Ducournau, Corinne; Saydaminova, Kamola; Richter, Maximilian; Yumul, Roma; Ho, Martin; Carter, Darrick; Zubieta, Chloé

    2015-01-01

    ABSTRACT We recently discovered that desmoglein 2 (DSG2) is a receptor for human adenovirus species B serotypes Ad3, Ad7, Ad11, and Ad14. Ad3 is considered to be a widely distributed human pathogen. Ad3 binding to DSG2 triggers the transient opening of epithelial junctions. Here, we further delineate the mechanism that leads to DSG2-mediated epithelial junction opening in cells exposed to Ad3 and recombinant Ad3 fiber proteins. We identified an Ad3 fiber knob-dependent pathway that involves the phosphorylation of mitogen-activated protein (MAP) kinases triggering the activation of the matrix-metalloproteinase ADAM17. ADAM17, in turn, cleaves the extracellular domain of DSG2 that links epithelial cells together. The shed DSG2 domain can be detected in cell culture supernatant and also in serum of mice with established human xenograft tumors. We then extended our studies to Ad14 and Ad14P1. Ad14 is an important research and clinical object because of the recent appearance of a new, more pathogenic strain (Ad14P1). In a human epithelial cancer xenograft model, Ad14P1 showed more efficient viral spread and oncolysis than Ad14. Here, we tested the hypothesis that a mutation in the Ad14P1 fiber knob could account for the differences between the two strains. While our X-ray crystallography studies suggested an altered three-dimensional (3D) structure of the Ad14P1 fiber knob in the F-G loop region, this did not significantly change the fiber knob affinity to DSG2 or the intracellular signaling and DSG2 shedding in epithelial cancer cells. IMPORTANCE A number of widely distributed adenoviruses use the epithelial junction protein DSG2 as a receptor for infection and lateral spread. Interaction with DSG2 allows the virus not only to enter cells but also to open epithelial junctions which form a physical barrier to virus spread. Our study elucidates the mechanism beyond virus-triggered junction opening with a focus on adenovirus serotype 3. Ad3 binds to DSG2 with its fiber

  3. Condom ads promote illicit sex.

    PubMed

    Kippley, J F

    1994-01-01

    Written in 1987, this opinion was republished in the wake of US President Bill Clinton's AIDS prevention media campaign promoting condom use which began January 1994, targeted at young adults aged 18-25. The author staunchly opposes condom use even though he admits that people do not consider abstinence from sex to be a serious option for the prevention of HIV/STD infection. He believes that there is no moral use of sex with a condom and that condoms have always been a sign of immorality, be it prostitution, adultery, fornication, or marital contraception. Likewise, the author laments the success enjoyed by Planned Parenthood in achieving the social acceptance of marital contraception and sex outside of marriage. The complete social acceptance of homosexual activity, however, remains to be achieved. Magazines, newspapers, and television receive income in exchange for publishing or airing advertisements. Finding offensive advertisements which promote the use of condoms against HIV infection, the author recommends writing letters of complaint to the responsible media sources. If the television stations or publications in question continue to advertise condoms to the public, stop watching them or end one's subscriptions to the particular printed media. Such action taken collectively among many individuals will reduce product sales and income, and potentially sway corporate policy against condom ads.

  4. 16 CFR 460.18 - Insulation ads.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... INSULATION § 460.18 Insulation ads. (a) If your ad gives an R-value, you must give the type of insulation and... your ad gives a price, you must give the type of insulation, the R-value at a specific thickness, the... you give the price per square foot, you do not have to give the coverage area. (c) If your ad...

  5. 16 CFR 460.18 - Insulation ads.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... INSULATION § 460.18 Insulation ads. (a) If your ad gives an R-value, you must give the type of insulation and... your ad gives a price, you must give the type of insulation, the R-value at a specific thickness, the... you give the price per square foot, you do not have to give the coverage area. (c) If your ad...

  6. Myths & Facts about Value-Added Analysis

    ERIC Educational Resources Information Center

    TNTP, 2011

    2011-01-01

    This paper presents myths as well as facts about value-added analysis. These myths include: (1) "Value-added isn't fair to teachers who work in high-need schools, where students tend to lag far behind academically"; (2) "Value-added scores are too volatile from year-to-year to be trusted"; (3) "There's no research behind value-added"; (4) "Using…

  7. New Features in the ADS Abstract Service

    NASA Technical Reports Server (NTRS)

    Eichhorn, Guenther; Accomazzi, Alberto; Grant, Carolyn S.; Kurtz, Michael J.; Henneken, Edwin A.; Thompson, Donna M.; Murray, Stephen S.

    2005-01-01

    The NASA-ADS Abstract Service provides a sophisticated search capability for the literature in Astronomy, Planetary Sciences, Physics/Geophysics, and Space Instrumentation. The ADS is funded by NASA and access to the ADS services is free to anybody world-wide without restrictions. It allows the user to search the literature by author, title, and abstract text.

  8. 27 CFR 19.456 - Adding denaturants.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Adding denaturants. 19.456... Denaturation § 19.456 Adding denaturants. Denaturants and spirits shall be mixed in packages, tanks, or bulk... proprietor shall submit a flow diagram of the intended process or method of adding denaturants. (Sec....

  9. Weighing the Claims in Diet Ads

    MedlinePlus

    ... página en español Weighing the Claims in Diet Ads Related Items Weight Loss Challenge Diet Ads and ... control Information Network .  The Truth Behind Weight Loss Ads Claims to watch out for include: Lose weight ...

  10. Historical Literature in the ADS

    NASA Astrophysics Data System (ADS)

    Eichhorn, G.; Kurtz, M. J.; Accomazzi, A.; Grant, C. S.

    1997-12-01

    The Astrophysics Data System at http://adswww.harvard.edu is in the process of scanning the historical astronomical literature and making it available through the World Wide Web. We have scanned several volumes from the early 1800's of the "Astronomische Nachrichten", and the "Monthly Notices of the Royal Astronomical Society", the two oldest astronomical journals. We also have several of the early volumes of the "Astrophysical Journal" and the "Astronomical Journal" available. For all the journals that we cover, we have scanned volume 1. These early volumes can be accessed on a page-by-page basis. We plan to continue to scan this historical literature and complete these journals within the next year. We are also collaborating with a preservation project at Harvard University. This project will microfilm selected parts of astronomical Observatory reports. We plan to scan these microfilms to produce electronic images of these reports and put them on-line in the ADS. We hope to eventually cover most of the astronomical literature. In order to organize the scanned pages into articles, we need tables of contents (ToC). The early issues of the journals did not have printed ToC pages, so this needs to be done by hand. We do not have the financial resources to build these ToCs. We are looking for collaborators who would be willing to work with us in building these ToCs for the older journals and observatory reports. If you are interested in such a project, please contact the first author at gei@cfa.harvard.edu.

  11. Metabolic profile of mephedrone: Identification of nor-mephedrone conjugates with dicarboxylic acids as a new type of xenobiotic phase II metabolites.

    PubMed

    Linhart, Igor; Himl, Michal; Židková, Monika; Balíková, Marie; Lhotková, Eva; Páleníček, Tomáš

    2016-01-05

    Metabolic profile of mephedrone (4-methylmethcathinone, 4-MMC), a frequently abused recreational drug, was determined in rats in vivo. The urine of rats dosed with a subcutaneous bolus dose of 20mg 4-MMC/kg was analysed by LC/MS. Ten phase I and five phase II metabolites were identified by comparison of their retention times and MS(2) spectra with those of authentic reference standards and/or with the MS(2) spectra of previously identified metabolites. The main metabolic pathway was N-demethylation leading to normephedrone (4-methylcathinone, 4-MC) which was further conjugated with succinic, glutaric and adipic acid. Other phase I metabolic pathways included oxidation of the 4-methyl group, carbonyl reduction leading to dihydro-metabolites and ω-oxidation at the position 3'. Five of the metabolites detected, namely, 4-carboxynormephedrone (4-carboxycathinone, 4-CC), 4-carboxydihydronormephedrone (4-carboxynorephedrine, 4-CNE), hydroxytolyldihydro-normephedrone (4-hydroxymethylnorephedrine, 4-OH-MNE) and conjugates of 4-MC with glutaric and adipic acid, have not been reported as yet. The last two conjugates represent a novel, hitherto unexploited, type of phase II metabolites in mammals together with an analogous succinic acid conjugate of 4-MC identified by Pozo et al. (2015). These conjugates might be potentially of great importance in the metabolism of other psychoactive amines.

  12. Value added liquid products from waste biomass pyrolysis using pretreatments.

    PubMed

    Das, Oisik; Sarmah, Ajit K

    2015-12-15

    Douglas fir wood, a forestry waste, was attempted to be converted into value added products by pretreatments followed by pyrolysis. Four different types of pretreatments were employed, namely, hot water treatment, torrefaction, sulphuric acid and ammonium phosphate doping. Subsequently, pyrolysis was done at 500°C and the resulting bio-oils were analysed for their chemical composition using Karl Fischer titration, thermogravimetry, ion exchange, and gas chromatography. Pretreatment with acid resulted in the highest yield of bio-oil (~60%). The acid and salt pretreatments were responsible for drastic reduction in the lignin oligomers and enhancement of water content in the pyrolytic liquid. The quantity of xylose/mannose reduced as a result of pretreatments. Although, the content of fermentable sugars remained similar across all the pretreatments, the yield of levoglucosan increased. Pretreatment of the biomass with acid yielded the highest amount of levoglucosan in the bio-oil (13.21%). The acid and salt pretreatments also elevated the amount of acetic acid in the bio-oils. Addition of acid and salt to the biomass altered the interaction of cellulose-lignin in the pyrolysis regime. Application of pretreatments should be based on the intended end use of the liquid product having a desired chemical composition.

  13. Long-distance inter-hydrogen bond coupling effects in the polarized IR spectra of succinic acid crystals

    NASA Astrophysics Data System (ADS)

    Flakus, Henryk T.; Hachuła, Barbara; Hołaj-Krzak, Jakub T.

    2015-05-01

    The spectral properties of four different crystalline succinic acid (HOOC-(CH2)2-COOH) (SAC) isotopomer systems, h6, d2, d4 and d6, were examined by means of the IR spectroscopy in polarized light aided by numerical simulations of the νO-H and νO-D band contour shapes on utilizing the "strong-coupling" model. The abnormal IR spectral properties of SAC crystals in relation to the corresponding properties of glutaric, pimelic and adipic acid crystals were ascribed to the hyperconjugation electronic effects in the acid associated molecules. A vibronic coupling mechanism involving the proton stretching vibrations in the (COOH)2 cycles and the electronic motions in the molecular skeletons, the isotopic "H/D self-organization" mechanisms and a long-distance vibrational exciton coupling between the adjacent (COOH)2 cycles in the molecular chains are mainly responsible for the generation of the temperature effects in the crystalline IR spectra.

  14. Joule-Thomson expansion of the charged AdS black holes

    NASA Astrophysics Data System (ADS)

    Ökcü, Özgür; Aydıner, Ekrem

    2017-01-01

    In this paper, we study Joule-Thomson effects for charged AdS black holes. We obtain inversion temperatures and curves. We investigate similarities and differences between van der Waals fluids and charged AdS black holes for the expansion. We obtain isenthalpic curves for both systems in the T- P plane and determine the cooling-heating regions.

  15. Static Einstein-Maxwell Black Holes with No Spatial Isometries in AdS Space.

    PubMed

    Herdeiro, Carlos A R; Radu, Eugen

    2016-11-25

    We explicitly construct static black hole solutions to the fully nonlinear, D=4, Einstein-Maxwell-anti-de Sitter (AdS) equations that have no continuous spatial symmetries. These black holes have a smooth, topologically spherical horizon (section), but without isometries, and approach, asymptotically, global AdS spacetime. They are interpreted as bound states of a horizon with the Einstein-Maxwell-AdS solitons recently discovered, for appropriate boundary data. In sharp contrast to the uniqueness results for a Minkowski electrovacuum, the existence of these black holes shows that single, equilibrium, black hole solutions in an AdS electrovacuum admit an arbitrary multipole structure.

  16. Effects of ad placement and type on consumer responses to podcast ads.

    PubMed

    Ritter, Eric A; Cho, Chang-Hoan

    2009-10-01

    The purpose of this study was to understand the effects of podcast ad placement and podcast ad type on consumers' perceived intrusiveness, perceived irritation, attitude toward the ad, and ad avoidance. Our 2 x 2 (traditional ad vs. sponsorship by beginning vs. middle) experimental study found that sponsorships generated better consumer responses than did traditional ads and that podcast ads placed at the beginning of audio podcasts yielded better consumer responses than those placed in the middle. Implications for marketers and advertisers are discussed.

  17. Boundary conditions for conformally coupled scalar in AdS4

    NASA Astrophysics Data System (ADS)

    Oh, Jae-Hyuk

    2015-06-01

    We consider conformally coupled scalar with ɸ4 coupling in AdS4 and study its various boundary conditions on AdS boundary. We have obtained perturbative solutions of equation of motion of the conformally coupled scalar with power expansion order by order in ɸ4 coupling λ up to λ2 order. In its dual CFT, we get 2, 4 and 6 point functions by using this solution with Dirichlet and Neumann boundary conditions via AdS/CFT dictionary. We also consider marginal deformation on AdS boundary and get its on-shell and boundary effective actions.

  18. The Heterogeneous Photocatalytic Decomposition of Benzoic Acid and Adipic Acid on Platinized TiO2 Powder. The Photo-Kolbe Decarboxylative Route to the Breakdown of the Benzene Ring and to the Production to Butane.

    DTIC Science & Technology

    1980-10-29

    photocatalyst design dis- cussed previously, lb’Ic where the rate of reaction at the catalyst powder is determined by the system operating at a potential... photocatalyst half reaction, as opposed to the results on aliphatic carboxylates. The reduction of oxygen on Pt (curve 7) occurs ai. potentials much more positive...semiconductor powders have been shown to behave as photocatalysts and promote the oxidation of sub- strates. 1-6 Irradiation of a semiconductor with

  19. Inseparability of photon-added Gaussian states

    SciTech Connect

    Li Hongrong; Li Fuli; Zhu Shiyao

    2007-06-15

    The inseparability of photon-added Gaussian states which are generated from two-mode Gaussian states by adding photons is investigated. According to the established inseparability conditions [New J. Phys. 7, 211 (2005); Phys. Rev. Lett. 96, 050503 (2006)], we find that even if a two-mode Gaussian state is separable, the photon-added Gaussian state becomes entangled when the purity of the Gaussian state is larger than a certain value. The lower bound of entanglement of symmetric photon-added Gaussian states is derived. The result shows that entanglement of the photon-added Gaussian states is involved with high-order moment correlations. We find that fidelity of teleporting coherent states cannot be raised by employing the photon-added Gaussian states as a quantum channel of teleportation.

  20. Ionically crosslinked Ad/chitosan nanocomplexes processed by electrospinning for targeted cancer gene therapy.

    PubMed

    Park, Yeonah; Kang, Eunah; Kwon, Oh-Joon; Hwang, Taewon; Park, Hongkwan; Lee, Jung Min; Kim, Jung Hyun; Yun, Chae-Ok

    2010-11-20

    For effective cancer gene therapy, systemic administration of tumor-targeting adenoviral (Ad) complexes is critical for delivery to both primary and metastatic lesions. Electrospinning was used to generate nanocomplexes of Ad, chitosan, poly(ethylene glycol) (PEG), and folic acid (FA) for effective FA receptor-expressing tumor-specific transduction. The chemical structure of the Ad/chitosan-PEG-FA nanocomplexes was characterized by NMR and FT-IR, and the diameter and surface charge were analyzed by dynamic light scattering and zeta potentiometry, respectively. The average size of Ad/chitosan-PEG-FA nanocomplexes was approximately 140 nm, and the surface charge was 2.1 mV compared to -4.9 mV for naked Ad. Electron microscopy showed well-dispersed, individual Ad nanocomplexes without aggregation or degradation. Ad/chitosan nanocomplexes retained biological activity without impairment of the transduction efficiency of naked Ad. The transduction efficiency of Ad/chitosan-PEG-FA was increased as a function of FA ratio in FA receptor-expressing KB cells, but not in FA receptor-negative U343 cells, demonstrating FA receptor-targeted viral transduction. In addition, the transduction efficiency of Ad/chitosan-PEG-FA was 57.2% higher than chitosan-encapsulated Ad (Ad/chitosan), showing the superiority of FA receptor-mediated endocytosis for viral transduction. The production of inflammatory cytokine, IL-6 from macrophages was significantly reduced by Ad/chitosan-PEG-FA nanocomplexes, implying the potential for use in systemic administration. These results clearly demonstrate that cancer cell-targeted viral transduction by Ad/chitosan-PEG-FA nanocomplexes can be used effectively for metastatic tumor treatment with reduced immune reaction against Ad.

  1. Capillary electrophoretic study of dibasic acids of different structures: Relation to separation of oxidative intermediates in remediation

    SciTech Connect

    Yu, Z.; Cocke, D.L.

    1998-09-01

    Dicarboxylic acids are important in environmental chemistry because they are intermediates in oxidative processes involved in natural remediation and waste management processes such as oxidative detoxification and advanced oxidation. Capillary electrophoresis (CE), a promising technique for separating and analyzing these intermediates, has been used to examine a series of dibasic acids of different structures and conformations. This series includes malonic acid, succinic acid, glutaric acid, adipic acid, pimelic acid, maleic acid, fumaric acid, phthalic acid, and trans, trans-muconic acid. The CE parameters as well as structural variations (molecular structure and molecular isomers, buffer composition, pH, applied voltage, injection mode, current, temperature, and detection wavelength) that affect the separations and analytical results have been examined in this study. Those factors that affect the separation have been delineated. Among these parameters, the pH has been found to be the most important, which affects the double-layer of the capillary wall, the electro-osmotic flow and analyte mobility. The optimum pH for separating these dibasic acids, as well as the other parameters are discussed in detail and related to the development of methods for analyzing oxidation intermediates in oxidative waste management procedures.

  2. Aqueous Phase Photo-Oxidation of Succinic Acid: Changes in Hygroscopic Properties and Reaction Products

    NASA Astrophysics Data System (ADS)

    Hudson, P. K.; Ninokawa, A.; Hofstra, J.; de Lijser, P.

    2013-12-01

    Atmospheric aerosol particles have been identified as important factors in understanding climate change. The extent to which aerosols affect climate is determined, in part, by hygroscopic properties which can change as a result of atmospheric processing. Dicarboxylic acids, components of atmospheric aerosol, have a wide range of hygroscopic properties and can undergo oxidation and photolysis reactions in the atmosphere. In this study, the hygroscopic properties of succinic acid aerosol, a non-hygroscopic four carbon dicarboxylic acid, were measured with a humidified tandem differential mobility analyzer (HTDMA) and compared to reaction products resulting from the aqueous phase photo-oxidation reaction of hydrogen peroxide and succinic acid. Reaction products were determined and quantified using gas chromatography-flame ionization detection (GC-FID) and GC-mass spectrometry (GC-MS) as a function of hydrogen peroxide:succinic acid concentration ratio and photolysis time. Although reaction products include larger non-hygroscopic dicarboxylic acids (e.g. adipic acid) and smaller hygroscopic dicarboxylic acids (e.g. malonic and oxalic acids), comparison of hygroscopic growth curves to Zdanovskii-Stokes-Robinson (ZSR) predictions suggests that the hygroscopic properties of many of the product mixtures are largely independent of the hygroscopicity of the individual components. This study provides a framework for future investigations to fully understand and predict the role of chemical reactions in altering atmospheric conditions that affect climate.

  3. Aerobic catabolism of phenylacetic acid in Pseudomonas putida U: biochemical characterization of a specific phenylacetic acid transport system and formal demonstration that phenylacetyl-coenzyme A is a catabolic intermediate.

    PubMed Central

    Schleissner, C; Olivera, E R; Fernández-Valverde, M; Luengo, J M

    1994-01-01

    The phenylacetic acid transport system (PATS) of Pseudomonas putida U was studied after this bacterium was cultured in a chemically defined medium containing phenylacetic acid (PA) as the sole carbon source. Kinetic measurement was carried out, in vivo, at 30 degrees C in 50 mM phosphate buffer (pH 7.0). Under these conditions, the uptake rate was linear for at least 3 min and the value of Km was 13 microM. The PATS is an active transport system that is strongly inhibited by 2,4-dinitrophenol, 4-nitrophenol (100%), KCN (97%), 2-nitrophenol (90%), or NaN3 (80%) added at a 1 mM final concentration (each). Glucose or D-lactate (10 mM each) increases the PATS in starved cells (140%), whereas arsenate (20 mM), NaF, or N,N'-dicyclohexylcarbodiimide (1 mM) did not cause any effect. Furthermore, the PATS is insensitive to osmotic shock. These data strongly suggest that the energy for the PATS is derived only from an electron transport system which causes an energy-rich membrane state. The thiol-containing compounds mercaptoethanol, glutathione, and dithiothreitol have no significant effect on the PATS, whereas thiol-modifying reagents such as N-ethylmaleimide and iodoacetate strongly inhibit uptake (100 and 93%, respectively). Molecular analogs of PA with a substitution (i) on the ring or (ii) on the acetyl moiety or those containing (iii) a different ring but keeping the acetyl moiety constant inhibit uptake to different extents. None of the compounds tested significantly increase the PA uptake rate except adipic acid, which greatly stimulates it (163%). The PATS is induced by PA and also, gratuitously, by some phenyl derivatives containing an even number of carbon atoms on the aliphatic moiety (4-phenyl-butyric, 6-phenylhexanoic, and 8-phenyloctanoic acids). However, similar compounds with an odd number of carbon atoms (benzoic, 3-phenylpropionic, 5-phenylvaleric, 7-phenylheptanoic, and 9-phenylnonanoic acids) as well as many other PA derivatives do not induce the system

  4. Waste valorization by biotechnological conversion into added value products.

    PubMed

    Liguori, Rossana; Amore, Antonella; Faraco, Vincenza

    2013-07-01

    Fossil fuel reserves depletion, global warming, unrelenting population growth, and costly and problematic waste recycling call for renewable resources of energy and consumer products. As an alternative to the 100 % oil economy, production processes based on biomass can be developed. Huge amounts of lignocellulosic wastes are yearly produced all around the world. They include agricultural residues, food farming wastes, "green-grocer's wastes," tree pruning residues, and organic and paper fraction of urban solid wastes. The common ways currently adopted for disposal of these wastes present environmental and economic disadvantages. As an alternative, processes for adding value to wastes producing high added products should be developed, that is the upgrading concept: adding value to wastes by production of a product with desired reproducible properties, having economic and ecological advantages. A wide range of high added value products, such as enzymes, biofuels, organic acids, biopolymers, bioelectricity, and molecules for food and pharmaceutical industries, can be obtained by upgrading solid wastes. The most recent advancements of their production by biotechnological processes are overviewed in this manuscript.

  5. Tested Demonstrations: Color Oscillations in the Formic Acid-Nitric Acid-Sulfuric Acid System.

    ERIC Educational Resources Information Center

    Raw, C. J. G.; And Others

    1983-01-01

    Presented are procedures for demonstrating the production of color oscillations when nitric acid is added to a formic acid/concentrated sulfuric acid mixture. Because of safety considerations, "Super-8" home movie of the color changes was found to be satisfactory for demonstration purposes. (JN)

  6. From path integrals to tensor networks for the AdS /CFT correspondence

    NASA Astrophysics Data System (ADS)

    Miyaji, Masamichi; Takayanagi, Tadashi; Watanabe, Kento

    2017-03-01

    In this paper, we discuss tensor network descriptions of AdS /CFT from two different viewpoints. First, we start with a Euclidean path-integral computation of ground state wave functions with a UV cutoff. We consider its efficient optimization by making its UV cutoff position dependent and define a quantum state at each length scale. We conjecture that this path integral corresponds to a time slice of anti-de Sitter (AdS) spacetime. Next, we derive a flow of quantum states by rewriting the action of Killing vectors of AdS3 in terms of the dual two-dimensional conformal field theory (CFT). Both approaches support a correspondence between the hyperbolic time slice H2 in AdS3 and a version of continuous multiscale entanglement renormalization ansatz. We also give a heuristic argument about why we can expect a sub-AdS scale bulk locality for holographic CFTs.

  7. Engineering of Penicillium chrysogenum for fermentative production of a novel carbamoylated cephem antibiotic precursor.

    PubMed

    Harris, Diana M; Westerlaken, Ilja; Schipper, Dick; van der Krogt, Zita A; Gombert, Andreas K; Sutherland, John; Raamsdonk, Leonie M; van den Berg, Marco A; Bovenberg, Roel A L; Pronk, Jack T; Daran, Jean-Marc

    2009-03-01

    Penicillium chrysogenum was successfully engineered to produce a novel carbamoylated cephalosporin that can be used as a synthon for semi-synthetic cephalosporins. To this end, genes for Acremonium chrysogenum expandase/hydroxylase and Streptomyces clavuligerus carbamoyltransferase were expressed in a penicillinG high-producing strain of P.chrysogenum. Growth of the engineered strain in the presence of adipic acid resulted in production of adipoyl-7-amino-3-carbamoyloxymethyl-3-cephem-4-carboxylic acid (ad7-ACCCA) and of several adipoylated pathway intermediates. A combinatorial chemostat-based transcriptome study, in which the ad7-ACCCA-producing strain and a strain lacking key genes in beta-lactam synthesis were grown in the presence and absence of adipic acid, enabled the dissection of transcriptional responses to adipic acid per se and to ad7-ACCCA production. Transcriptome analysis revealed that adipate catabolism in P.chrysogenum occurs via beta-oxidation and enabled the identification of putative genes for enzymes involved in mitochondrial and peroxisomal beta-oxidation pathways. Several of the genes that showed a specifically altered transcript level in ad7-ACCCA-producing cultures were previously implicated in oxidative stress responses.

  8. Biocomposites Prepared from Fiber Processing Wastes and Glycerol Polyesters

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Biocomposites were prepared by the addition of flax fiber processing waste to glycerol and adipic acid mixtures. The processing waste consisted of fiber, cuticle, and shive fragments generated during the commercial cleaning of retted flax bast fibers. These waste materials were added at 1, 3, or 5 w...

  9. = 4 supersymmetric Yang-Mills theories in AdS3

    NASA Astrophysics Data System (ADS)

    Kuzenko, Sergei M.; Tartaglino-Mazzucchelli, Gabriele

    2014-05-01

    For all types of = 4 anti-de Sitter (AdS) supersymmetry in three dimensions, we construct manifestly supersymmetric actions for Abelian vector multiplets and explain how to extend the construction to the non-Abelian case. Manifestly = 4 supersymmetric Yang-Mills (SYM) actions are explicitly given in the cases of (2,2) and critical (4,0) AdS supersymmetries. The = 4 vector multiplets and the corresponding actions are then reduced to (2,0) AdS superspace, in which only = 2 supersymmetry is manifest. Using the off-shell structure of the = 4 vector multiplets, we provide complete = 4 SYM actions in (2,0) AdS superspace for all types of = 4 AdS supersymmetry. In the case of (4,0) AdS supersymmetry, which admits a Euclidean counterpart, the resulting = 2 action contains a Chern-Simons term proportional to q/r, where r is the radius of AdS 3 and q is the R-charge of a chiral scalar superfield. The R-charge is a linear inhomogeneous function of X, an expectation value of the = 4 Cotton superfield. Thus our results explain the mysterious structure of = 4 supersymmetric Yang-Mills theories on S 3 discovered in arXiv:1401.7952. In the case of (3,1) AdS supersymmetry, which has no Euclidean counterpart, the SYM action contains both a Chern-Simons term and a chiral mass-like term. In the case of (2,2) AdS supersymmetry, which admits a Euclidean counterpart, the SYM action has no Chern-Simons and chiral mass-like terms.

  10. Justidrusamides A-D, new 2-aminobenzyl alcohol derivatives from Justicia gendarussa.

    PubMed

    Kiren, Yuko; Deguchi, Jun; Hirasawa, Yusuke; Morita, Hiroshi; Prajogo, Bambang

    2014-10-01

    Justidrusamides A-D (1-4), four new alkaloids containing 2-aminobenzyl alcohol, succinic acid, and 2,3-dihydroxy-2-(1-hydroxyethyl) butanoic acid skeletons have been isolated from leaves of Justicia gendarussa, and their structures were elucidated using 2D NMR data and chemical means. This is the first report of a 2,3-dihydroxy-2-(1-hydroxyethyl) butanoic acid derivative in nature.

  11. 27 CFR 24.182 - Use of acid to correct natural deficiencies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... citric acid may be added to citrus fruit, juice or wine, only malic acid may be added to apples, apple juice or wine, and only citric acid or malic acid may be added to other fruit (including berries) or to juice or wine derived from other fruit (including berries) to correct natural deficiencies to 9.0...

  12. Beyond Test Scores: Adding Value to Assessment

    ERIC Educational Resources Information Center

    Rothman, Robert

    2010-01-01

    At a time when teacher quality has emerged as a key factor in student learning, a statistical technique that determines the "value added" that teachers bring to student achievement is getting new scrutiny. Value-added measures compare students' growth in achievement to their expected growth, based on prior achievement and demographic…

  13. Thermodynamic geometry and phase transitions of AdS braneworld black holes

    NASA Astrophysics Data System (ADS)

    Chaturvedi, Pankaj; Sengupta, Gautam

    2017-02-01

    The thermodynamics and phase transitions of charged RN-AdS and rotating Kerr-AdS black holes in a generalized Randall-Sundrum braneworld are investigated in the framework of thermodynamic geometry. A detailed analysis of the thermodynamics, stability and phase structures in the canonical and the grand canonical ensembles for these AdS braneworld black holes are described. The thermodynamic curvatures for both these AdS braneworld black holes are computed and studied as a function of the thermodynamic variables. Through this analysis we illustrate an interesting dependence of the phase structures on the braneworld parameter for these black holes.

  14. Next-Generation A/D Sampler ADS3000+ for VLBI2010

    NASA Technical Reports Server (NTRS)

    Takefuji, Kazuhiro; Takeuchi, Hiroshi; Tsutsumi, Masanori; Koyama, Yasuhiro

    2010-01-01

    A high-speed A/D sampler, called ADS3000+, has been developed in 2008, which can sample one analog signal up to 4 Gbps to versatile Linux PC. After A/D conversion, the ADS3000+ can perform digital signal processing such as real-time DBBC (Digital Base Band Conversion) and FIR filtering such as simple CW RFI filtering using the installed FPGAs. A 4 Gsps fringe test with the ADS3000+ has been successfully performed. The ADS3000+ will not exclusively be used for VLBI but will also be employed in other applications.

  15. Holographic complexity and fidelity susceptibility as holographic information dual to different volumes in AdS

    NASA Astrophysics Data System (ADS)

    Mazhari, N. S.; Momeni, Davood; Bahamonde, Sebastian; Faizal, Mir; Myrzakulov, Ratbay

    2017-03-01

    The holographic complexity and fidelity susceptibility have been defined as new quantities dual to different volumes in AdS. In this paper, we will use these new proposals to calculate both of these quantities for a variety of interesting deformations of AdS. We obtain the holographic complexity and fidelity susceptibility for an AdS black hole, Janus solution, a solution with cylindrical symmetry, an inhomogeneous background and a hyperscaling violating background. It is observed that the holographic complexity depends on the size of the subsystem for all these solutions and the fidelity susceptibility does not have any such dependence.

  16. Effect of hyaluronic acid molecular weight on the morphology of quantum dot-hyaluronic acid conjugates.

    PubMed

    Kim, Jiseok; Park, Kitae; Hahn, Sei Kwang

    2008-01-01

    The morphological analysis of novel quantum dot-hyaluronic acid (QDot-HA) conjugates was carried out with a transmission electron microscope (TEM). Adipic acid dihydrazide-modified HA (HA-ADH) was synthesized and conjugated to quantum dots (QDots) having carboxyl terminal ligands which were activated with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysulfosuccinimide (sulfo-NHS). HA molecules with a molecular weight (MW) of 20K, 234 K and 3000 K were used to investigate the effect of MW on the morphology of QDot-HA conjugates. The TEM micrographs of QDot-HA conjugates showed branched and multi-layered chain type morphology formed by inter- and intra-molecular conjugation of QDots to HA molecules. The size of QDot-HA conjugate increased with the MW of HA. QDot-HA conjugate could be successfully used for real-time bio-imaging of HA derivatives in nude mice. The novel QDot-HA conjugate will be further used to investigate the biological roles of HA with a different MW in the body.

  17. [Rapid analysis of added ingredients in heroin].

    PubMed

    Wang, Ji-fen; Yu, Jing; Guo, Xin; Sun, Xing-long; Wang, Ding-fang

    2011-07-01

    The method of rapid analysis of added ingredients in heroin was studied in the present paper. Adding sucrose, fructose, glucose, starch, caffeine and phenacetin to heroin with a certain percentage, the changes in the infrared spectrum with the concentration of heroin increasing and the detection limit of the additives were determined. Whether or not heroin can be detected in the sample with high concentration of added ingredients was studied using Raman spectroscopy. Similarly, in high purity of heroin, whether or not Raman spectroscopy can detect the added ingredients was tested. Through systematic experiments, the results showed that: using infrared spectroscopy and Raman spectroscopy to test the added ingredients of heroin is a rapid and effective method. Each has both advantages and disadvantages. We should select the appropriate method according to the actual cases.

  18. The eleven observations of comets between 687 AD and 1114 AD recorded in the Anglo Saxon Chronicle

    NASA Technical Reports Server (NTRS)

    Mardon, E. G.; Williams, J.; Mardon, A. A.

    1992-01-01

    This research paper is an examination of the eleven cometary references (679AD, 729AD, 892AD, 950AD, 975AD, 995AD, 1066AD, 1097AD, 1106AD, 1110AD and 1114AD) found in the various manuscripts of The Anglo Saxon Chronicle between 678 AD and 1114 AD. The manuscripts contain more than 35 celestial observations. This is an examination of astronomical phenomena and other climatic or natural events, that are described in The Anglo Saxon Chronicle, which is also referred to as The Old English Annals.

  19. Inflation in AdS/CFT

    SciTech Connect

    Freivogel, Ben; Hubeny, Veronika E.; Maloney, Alexander; Myers, Rob; Rangamani, Mukund; Shenker, Stephen; /Stanford U., Phys. Dept.

    2005-10-07

    We study the realization of inflation within the AdS/CFT correspondence. We assume the existence of a string landscape containing at least one stable AdS vacuum and a (nearby) metastable de Sitter state. Standard arguments imply that the bulk physics in the vicinity of the AdS minimum is described by a boundary CFT. We argue that large enough bubbles of the dS phase, including those able to inflate, are described by mixed states in the CFT. Inflating degrees of freedom are traced over and do not appear explicitly in the boundary description. They nevertheless leave a distinct imprint on the mixed state. Analytic continuation allows us, in principle, to recover a large amount of nonperturbatively defined information about the inflating regime. Our work also shows that no scattering process can create an inflating region, even by quantum tunneling, since a pure state can never evolve into a mixed state under unitary evolution.We study the realization of inflation within the AdS/CFT correspondence. We assume the existence of a string landscape containing at least one stable AdS vacuum and a (nearby) metastable de Sitter state. Standard arguments imply that the bulk physics in the vicinity of the AdS minimum is described by a boundary CFT. We argue that large enough bubbles of the dS phase, including those able to inflate, are described by mixed states in the CFT. Inflating degrees of freedom are traced over and do not appear explicitly in the boundary description. They nevertheless leave a distinct imprint on the mixed state. Analytic continuation allows us, in principle, to recover a large amount of nonperturbatively defined information about the inflating regime. Our work also shows that no scattering process can create an inflating region, even by quantum tunneling, since a pure state can never evolve into a mixed state under unitary evolution.

  20. Superradiance instability of small rotating AdS black holes in arbitrary dimensions

    NASA Astrophysics Data System (ADS)

    Delice, Ã.-zgür; Durǧut, Türküler

    2015-07-01

    We investigate the stability of D dimensional singly rotating Myers-Perry-AdS black holes under superradiance against scalar field perturbations. It is well known that small four dimensional rotating or charged Anti-de Sitter (AdS) black holes are unstable against superradiance instability of a scalar field. Recent works extended the existence of this instability to five dimensional rotating charged AdS black holes or static charged AdS black holes in arbitrary dimensions. In this paper we analytically prove that rotating small AdS black holes in arbitrary dimensions also shows superradiance instability irrespective of the value of the (positive) angular momentum quantum number. To do this we solve the Klein-Gordon equation in the slow rotation, low frequency limit. By using the asymptotic matching technique, we are able to calculate the real and imaginary parts of the correction terms to the frequency of the scalar field due to the presence of the black hole, confirming the presence of superradiance instability. We see that, unlike in the case of static AdS black holes, the analytical method is valid for rotating AdS black holes for any value of angular momentum number and spacetime dimensions. For comparison we derive the corresponding correction terms for Myers-Perry black holes in the black hole bomb formalism in the Appendix and see that the results are in agreement.

  1. Isoquercitrin Esters with Mono- or Dicarboxylic Acids: Enzymatic Preparation and Properties

    PubMed Central

    Vavříková, Eva; Langschwager, Fanny; Jezova-Kalachova, Lubica; Křenková, Alena; Mikulová, Barbora; Kuzma, Marek; Křen, Vladimír; Valentová, Kateřina

    2016-01-01

    A series of isoquercitrin (quercetin-3-O-β-d-glucopyranoside) esters with mono- or dicarboxylic acids was designed to modulate hydro- and lipophilicity and biological properties. Esterification of isoquercitrin was accomplished by direct chemoenzymatic reaction using Novozym 435 (lipase from Candida antarctica), which accepted C5- to C12-dicarboxylic acids; the shorter ones, such as oxalic (C2), malonic (C3), succinic (C4) and maleic (C4) acids were not substrates of the lipase. Lipophilicity of monocarboxylic acid derivatives, measured as log P, increased with the chain length. Esters with glutaric and adipic acids exhibited hydrophilicity, and the dodecanedioic acid hemiester was more lipophilic. All derivatives were less able to reduce Folin–Ciocalteau reagent (FCR) and scavenge DPPH (1,1-diphenyl-2-picrylhydrazyl) than isoquercitrin; ABTS (2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)) radical-scavenging activity was comparable. Dodecanoate and palmitate were the least active in FCR and ABTS scavenging; dodecanoate and hemiglutarate were the strongest DPPH scavengers. In contrast, most derivatives were much better inhibitors of microsomal lipoperoxidation than isoquercitrin; butyrate and hexanoate were the most efficient. Anti-lipoperoxidant activity of monocarboxylic derivatives, except acetates, decreased with increasing aliphatic chain. The opposite trend was noted for dicarboxylic acid hemiesters, isoquercitrin hemidodecanedioate being the most active. Overall, IQ butyrate, hexanoate and hemidodecanedioate are the most promising candidates for further studies. PMID:27338349

  2. Isoquercitrin Esters with Mono- or Dicarboxylic Acids: Enzymatic Preparation and Properties.

    PubMed

    Vavříková, Eva; Langschwager, Fanny; Jezova-Kalachova, Lubica; Křenková, Alena; Mikulová, Barbora; Kuzma, Marek; Křen, Vladimír; Valentová, Kateřina

    2016-06-07

    A series of isoquercitrin (quercetin-3-O-β-d-glucopyranoside) esters with mono- or dicarboxylic acids was designed to modulate hydro- and lipophilicity and biological properties. Esterification of isoquercitrin was accomplished by direct chemoenzymatic reaction using Novozym 435 (lipase from Candida antarctica), which accepted C₅- to C12-dicarboxylic acids; the shorter ones, such as oxalic (C₂), malonic (C₃), succinic (C₄) and maleic (C₄) acids were not substrates of the lipase. Lipophilicity of monocarboxylic acid derivatives, measured as log P, increased with the chain length. Esters with glutaric and adipic acids exhibited hydrophilicity, and the dodecanedioic acid hemiester was more lipophilic. All derivatives were less able to reduce Folin-Ciocalteau reagent (FCR) and scavenge DPPH (1,1-diphenyl-2-picrylhydrazyl) than isoquercitrin; ABTS (2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)) radical-scavenging activity was comparable. Dodecanoate and palmitate were the least active in FCR and ABTS scavenging; dodecanoate and hemiglutarate were the strongest DPPH scavengers. In contrast, most derivatives were much better inhibitors of microsomal lipoperoxidation than isoquercitrin; butyrate and hexanoate were the most efficient. Anti-lipoperoxidant activity of monocarboxylic derivatives, except acetates, decreased with increasing aliphatic chain. The opposite trend was noted for dicarboxylic acid hemiesters, isoquercitrin hemidodecanedioate being the most active. Overall, IQ butyrate, hexanoate and hemidodecanedioate are the most promising candidates for further studies.

  3. Space-like minimal surfaces in AdS × S

    NASA Astrophysics Data System (ADS)

    Dorn, Harald; Drukker, Nadav; Jorjadze, George; Kalousios, Chrysostomos

    2010-04-01

    We present a four parameter family of classical string solutions in AdS 3 × S 3, which end along a light-like tetragon at the boundary of AdS 3 and carry angular momentum along two cycles on the sphere. The string surfaces are space-like and their projections on AdS 3 and on S 3 have constant mean curvature. The construction is based on the Pohlmeyer reduction of the related sigma model. After embedding in AdS 5 × S 5, we calculate the regularized area and analyze conserved charges. Comments on possible relations to scattering amplitudes are presented. We also sketch time-like versions of our solutions.

  4. Quantum corrections to supergravity on AdS2×S2

    NASA Astrophysics Data System (ADS)

    Larsen, Finn; Lisbão, Pedro

    2015-04-01

    We compute the off-shell spectrum of supergravity on AdS2×S2 by explicit diagonalization of the equations of motion for an effective AdS2 theory where all fields are dualized to scalars and spin-1/2 fermions. We classify all bulk modes as physical, gauge violating, and pure gauge then compute the physical spectrum by explicit cancellation of unphysical modes. We identify boundary modes as physical fields on S2 that are formally pure gauge but with gauge function that is non-normalizable on AdS2. As an application we compute the leading quantum correction to AdS2×S2 as a sum over physical fields including boundary states. The result agrees with a previous computation by Sen [1] where unphysical modes were canceled by ghosts.

  5. Recovery of organic acids

    DOEpatents

    Verser, Dan W.; Eggeman, Timothy J.

    2009-10-13

    A method is disclosed for the recovery of an organic acid from a dilute salt solution in which the cation of the salt forms an insoluble carbonate salt. A tertiary amine and CO.sub.2 are introduced to the solution to form the insoluble carbonate salt and a complex between the acid and an amine. A water immiscible solvent, such as an alcohol, is added to extract the acid/amine complex from the dilute salt solution to a reaction phase. The reaction phase is continuously dried and a product between the acid and the solvent, such as an ester, is formed.

  6. Recovery of organic acids

    DOEpatents

    Verser, Dan W [Menlo Park, CA; Eggeman, Timothy J [Lakewood, CO

    2011-11-01

    A method is disclosed for the recovery of an organic acid from a dilute salt solution in which the cation of the salt forms an insoluble carbonate salt. A tertiary amine and CO.sub.2 are introduced to the solution to form the insoluble carbonate salt and a complex between the acid and an amine. A water immiscible solvent, such as an alcohol, is added to extract the acid/amine complex from the dilute salt solution to a reaction phase. The reaction phase is continuously dried and a product between the acid and the solvent, such as an ester, is formed.

  7. Supergravity background of the λ-deformed AdS3 × S3 supercoset

    NASA Astrophysics Data System (ADS)

    Chervonyi, Yuri; Lunin, Oleg

    2016-09-01

    We construct the solution of type IIB supergravity describing the integrable λ-deformation of the AdS3 ×S3 supercoset. While the geometry corresponding to the deformation of the bosonic coset has been found in the past, our background is more natural for studying superstrings, and several interesting features distinguish our solution from its bosonic counterpart. We also report progress towards constructing the λ-deformation of the AdS5 ×S5 supercoset.

  8. Thermoplastic starch/polyester films: effects of extrusion process and poly (lactic acid) addition.

    PubMed

    Shirai, Marianne Ayumi; Olivato, Juliana Bonametti; Garcia, Patrícia Salomão; Müller, Carmen Maria Olivera; Grossmann, Maria Victória Eiras; Yamashita, Fabio

    2013-10-01

    Biodegradable films were produced using the blown extrusion method from blends that contained cassava thermoplastic starch (TPS), poly(butylene adipate-co-terephthalate) (PBAT) and poly(lactic acid) (PLA) with two different extrusion processes. The choice of extrusion process did not have a significant effect on the mechanical properties, water vapor permeability (WVP) or viscoelasticity of the films, but the addition of PLA decreased the elongation, blow-up ratio (BUR) and opacity and increased the elastic modulus, tensile strength and viscoelastic parameters of the films. The films with 20% PLA exhibited a lower WVP due to the hydrophobic nature of this polymer. Morphological analyses revealed the incompatibility between the polymers used.

  9. Oleuropein as a bioactive constituent added in milk and yogurt.

    PubMed

    Zoidou, Evangelia; Magiatis, Prokopios; Melliou, Eleni; Constantinou, Maria; Haroutounian, Serkos; Skaltsounis, Alexios-Leandros

    2014-09-01

    Oleuropein is a bioactive natural product from olives known to display a broad variety of health beneficial properties. However its presence in most edible olives is lowered due to debittering. In this respect, we envisaged the incorporation of oleuropein into dairy products (cow's milk and yogurt) aiming to produce novel functional foods. Additionally, an analytical method for the monitoring of oleuropein in milk and yogurt was also developed and validated. Oleuropein was not affected during heat treatment of milk, while during the milk fermentation process it was not hydrolysed by the produced acids. Oleuropein was not metabolised by lactic acid bacteria, did not inhibit their growth and its stability in the final products was proven. The novel products displayed same taste, colour and texture as the conventional ones. Results herein indicate that oleuropein can be added as an active ingredient in milk and yogurt preparations to provide two novel functional dairy products.

  10. Oxidative degradation of organic acids conjugated with sulfite oxidation in flue-gas desulfurization. Final report, June 1984-June 1986

    SciTech Connect

    Lee, Y.J.; Rochelle, G.T.

    1988-02-01

    This report gives results of a study of organic acid-degradation conjugated with sulfite oxidation under flue-gas desulfurization (FGD) conditions. The oxidative degradation constant, k12, is defined as the ratio of organic-acid degradation rate and sulfite oxidation-rate times the ratio of the concentrations of dissolved S(IV) and organic acid. It is not significantly affected by pH or dissolved oxygen in the absence of Mn or Fe. However, k12 is increased by certain transition metals such as Fe, Co, and Ni and is decreased by Mn and halides. Lower dissolved S(IV) magnifies these effects. A free-radical mechanism was proposed to describe the kinetics. Hydroxy and sulfonated carboxylic acids degrade approximately three times slower than saturated dicarboxylic acids; while maleic acid, an unsaturated dicarboxylic acid, degraded an order of magnitude faster. A wide spectrum of degradation products of adipic acid were found, including carbon dioxide (the major product), smaller dicarboxylic acids, monocarboxylic acids, other carbonyl compounds, and hydrocarbons.

  11. Oxidative degradation of organic acid conjugated with sulfite oxidation in flue gas desulfurization: products, kinetics and mechanism

    SciTech Connect

    Lee, Y.J.; Rochelle, G.T.

    1987-03-01

    Organic acid degradation conjugated with sulfite oxidation has been studied under flue gas desulfurization (FGD) conditions. The oxidative degradation constant k/sub 12/ is defined as the ratio of organic acid degradation rate and sulfite oxidation rate times the ratio of the concentration of dissolved S(IV) and organic acid. It is not significantly affected by pH or dissolved oxygen in the absence of manganese or iron. However, k/sub 12/ is increased by certain transition metals such as Fe, Co, and Ni and is decreased by Mn and halides. Lower dissolved S(IV) magnifies these effects. A free radical mechanism was proposed to describe the kinetics. Hydroxy and sulfonated carboxylic acids degrade approximately 3 times slower than saturated dicarboxylic acids, while maleic acid, an unsaturated dicarboxylic acid, degraded an order of magnitude factor. A wide spectrum of degradation products of adipic acid were found, including carbon dioxide - the major product - smaller dicarboxylic acids, monocarboxylic acids, other carbonyl compounds, and hydrocarbons. 30 references, 7 figures, 7 tables.

  12. 40 CFR 98.51 - Reporting threshold.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.51 Reporting threshold. You must report GHG emissions under this subpart if your facility contains an adipic acid production process and the...

  13. 40 CFR 98.51 - Reporting threshold.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.51 Reporting threshold. You must report GHG emissions under this subpart if your facility contains an adipic acid production process and the...

  14. 40 CFR 98.55 - Procedures for estimating missing data.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.55 Procedures for... (a) and (b) of this section. (a) For each missing value of monthly adipic acid production,...

  15. 40 CFR 98.57 - Records that must be retained.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.57 Records that must be retained... paragraphs (a) through (h) of this section at the facility level: (a) Annual adipic acid production...

  16. 40 CFR 98.51 - Reporting threshold.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.51 Reporting threshold. You must report GHG emissions under this subpart if your facility contains an adipic acid production process and the...

  17. 40 CFR 98.55 - Procedures for estimating missing data.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.55 Procedures for... (a) and (b) of this section. (a) For each missing value of monthly adipic acid production,...

  18. 40 CFR 98.51 - Reporting threshold.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.51 Reporting threshold. You must report GHG emissions under this subpart if your facility contains an adipic acid production process and the...

  19. Testing the AdS/CFT Correspondence

    SciTech Connect

    Klebanov, Igor R.

    2008-07-28

    This lecture begins with some history and basic facts about string theory and its connections with strong interactions. Comparisons of stacks of Dirichlet branes with curved backgrounds produced by them are used to motivate the AdS/CFT correspondence between superconformal gauge theory and string theory on a product of Anti-de Sitter space and a compact manifold. The ensuing duality between semi-classical spinning strings and long gauge theory operators is briefly reviewed. We go on to describe a recent test of the AdS/CFT correspondence using the Wilson loop cusp anomaly as a function of the coupling, which also enters dimensions of high-spin operators. Finally, strongly coupled thermal SYM theory is explored via a black hole in 5-dimensional AdS space, which leads to explicit results for its entropy and shear viscosity.

  20. The Recent Data Explosion in the ADS

    NASA Astrophysics Data System (ADS)

    Grant, Carolyn S.; Accomazzi, A.; Henneken, E.; Thompson, D.; Kurtz, M. J.; Murray, S. S.

    2007-12-01

    In the past 12 months, we have added over a million records to the ADS Abstract Service. This is the equivalent of a 20% increase, or about double the rate of increase that the ADS has seen in recent years. This significant increase in size is due to the addition of several large datasets including historical data from many Springer astronomy and physics journals as well as bibliographic records from the full run of A&A Abstracts from the Astronomisches Rechen-Institut. The number of citations in the Abstract Service has seen an increase of more than 25%, bringing the total number of citations to over 25 million. Our recent agreement to index records from CrossRef will continue the data explosion in the ADS into 2008.

  1. 21 CFR 172.320 - Amino acids.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Amino acids. 172.320 Section 172.320 Food and....320 Amino acids. The food additive amino acids may be safely used as nutrients added to foods in... individual amino acids in the free, hydrated, or anhydrous form, or as the hydrochloride, sodium,...

  2. Adding stress plot function to NASTRAN

    NASA Technical Reports Server (NTRS)

    Katoh, S.

    1978-01-01

    Stress plot function was developed and added to the NASTRAN level 15.5. Computed stress distribution can be displayed by this function, with vectors showing the principal stresses of the finite elements over the specified portions of the structure. NASTRAN is reviewed in the aspect of plotting capabilities. Stress tensor field is examined in preparation of stress display. Then the stress plot function as added to the NASTRAN is described. A sample plotout by this function is shown.

  3. Image Ads and Issue Ads in U.S. Presidential Advertising: Using Videostyle To Explore Stylistic Differences in Televised Political Ads From 1952 to 2000.

    ERIC Educational Resources Information Center

    Johnston, Anne; Kaid, Lynda Lee

    2002-01-01

    Explores the differences in techniques, strategies, narratives, and symbols used in 1,213 television issue ads and image ads from 13 U.S. presidential campaigns. Concludes that although the majority of both types of ads were positive, negative appeals dominated a higher percentage of issue ads as compared with image ads. (SG)

  4. AdS5×S(5) mirror model as a string sigma model.

    PubMed

    Arutyunov, Gleb; van Tongeren, Stijn J

    2014-12-31

    Doing a double Wick rotation in the world sheet theory of the light cone AdS5×S(5) superstring results in an inequivalent, so-called mirror theory that plays a central role in the field of integrability in the AdS-CFT correspondence. We show that this mirror theory can be interpreted as the light cone theory of a free string on a different background. This background is related to dS5×H(5) by a double T-duality, and has hidden supersymmetry. The geometry can also be extracted from an integrable deformation of the AdS5×S(5) sigma model, and we prove the observed mirror duality of these deformed models at the bosonic level as a byproduct. While we focus on AdS5×S(5), our results apply more generally.

  5. Determination of Dicarboxylic Acid Concentrations in Surface Microlayer of Dams in Okinawa, Japan

    NASA Astrophysics Data System (ADS)

    Kotani, Y.; Taira, N.; Kamizato, C.; Arakaki, T.

    2008-12-01

    The surface microlayer (SML) is a thin layer that forms the boundary between atmosphere and water body. The SML includes fatty acid, protein and other organic compounds. It is the site across which the atmosphere-water system interacts. It also has unique chemical, physical and biological properties, which are very different from those of the underlying water. We determined concentrations of dicarboxylic acids (oxalic, malic, malonic, succinic, adipic, phthalic, fumaric, and maleic acids) in the SML, and compared with those of underlying bulk water. Dicarboxylic acids are the major organic compounds found in atmospheric aerosols, which can be derived from the wind-blown SML. The sampling sites we chose were dams in Okinawa, Japan. The SML was sampled by using a glass plate method. Concentrations of dicarboxylic acids were determined by using a GC-FID after derivatization. The results showed that the dicarboxylic acid concentrations were 2- 17 times higher than those of the underlying water. We have also found that the concentrations of some of the dicarboxylic acids were lower in the afternoon than those in the morning at the same sampling site.

  6. Mechanism for the definition of elongation and termination by the class II CCA-adding enzyme.

    PubMed

    Toh, Yukimatsu; Takeshita, Daijiro; Numata, Tomoyuki; Fukai, Shuya; Nureki, Osamu; Tomita, Kozo

    2009-11-04

    The CCA-adding enzyme synthesizes the CCA sequence at the 3' end of tRNA without a nucleic acid template. The crystal structures of class II Thermotoga maritima CCA-adding enzyme and its complexes with CTP or ATP were determined. The structure-based replacement of both the catalytic heads and nucleobase-interacting neck domains of the phylogenetically closely related Aquifex aeolicus A-adding enzyme by the corresponding domains of the T. maritima CCA-adding enzyme allowed the A-adding enzyme to add CCA in vivo and in vitro. However, the replacement of only the catalytic head domain did not allow the A-adding enzyme to add CCA, and the enzyme exhibited (A, C)-adding activity. We identified the region in the neck domain that prevents (A, C)-adding activity and defines the number of nucleotide incorporations and the specificity for correct CCA addition. We also identified the region in the head domain that defines the terminal A addition after CC addition. The results collectively suggest that, in the class II CCA-adding enzyme, the head and neck domains collaboratively and dynamically define the number of nucleotide additions and the specificity of nucleotide selection.

  7. Quality Characteristics of Stirred Yoghurt Added with Fermented Red Pepper.

    PubMed

    Yu, Mi-Sang; Kim, Jeong-Mee; Lee, Chi-Ho; Son, Yoon-Jeong; Kim, Soo-Ki

    2014-01-01

    Pungency of hot pepper has limited its usage even though it shows various health beneficial effects. This study was conducted to develop the novel yoghurt containing hot pepper with diminishing pungency and aimed to examine the quality characteristics of yoghurt prepared with fermented red pepper. Hot pepper was first fermented with Bacillus licheniformis SK1230 to reduce the pungency of capsaicin. We then examined the quality, sensory characteristics, and antioxidant activity of yoghurt containing the fermented red pepper. The titratable acidity of this yoghurt increased whereas the viscosity decreased with increasing amounts of added red pepper. The total polyphenol content increased in proportion to the amount of added red pepper. The antioxidant activity significantly increased with the addition of red pepper (p<0.05). Color evaluation showed that the L value decreased whereas the a and b values increased significantly with the amount of red pepper added (p<0.05). In the sensory evaluation, yoghurt prepared with higher amounts of fermented red pepper received lower scores. However, yoghurt containing fermented red pepper at a concentration of 0.05% received higher scores for taste, flavor, and overall acceptability than yoghurt prepared with non-fermented pepper. Therefore, it can be concluded that the application of red pepper fermented by Bacillus licheniformis SK1230 gives beneficial feature to the preparation of yoghurt.

  8. Quality Characteristics of Stirred Yoghurt Added with Fermented Red Pepper

    PubMed Central

    Yu, Mi-Sang; Kim, Jeong-Mee; Lee, Chi-Ho; Son, Yoon-Jeong; Kim, Soo-Ki

    2014-01-01

    Pungency of hot pepper has limited its usage even though it shows various health beneficial effects. This study was conducted to develop the novel yoghurt containing hot pepper with diminishing pungency and aimed to examine the quality characteristics of yoghurt prepared with fermented red pepper. Hot pepper was first fermented with Bacillus licheniformis SK1230 to reduce the pungency of capsaicin. We then examined the quality, sensory characteristics, and antioxidant activity of yoghurt containing the fermented red pepper. The titratable acidity of this yoghurt increased whereas the viscosity decreased with increasing amounts of added red pepper. The total polyphenol content increased in proportion to the amount of added red pepper. The antioxidant activity significantly increased with the addition of red pepper (p<0.05). Color evaluation showed that the L value decreased whereas the a and b values increased significantly with the amount of red pepper added (p<0.05). In the sensory evaluation, yoghurt prepared with higher amounts of fermented red pepper received lower scores. However, yoghurt containing fermented red pepper at a concentration of 0.05% received higher scores for taste, flavor, and overall acceptability than yoghurt prepared with non-fermented pepper. Therefore, it can be concluded that the application of red pepper fermented by Bacillus licheniformis SK1230 gives beneficial feature to the preparation of yoghurt. PMID:26761278

  9. Supersymmetric wrapped membranes, AdS2 spaces, and bubbling geometries

    NASA Astrophysics Data System (ADS)

    MacConamhna, Oisín A. P.; Colgáin, Eoin Ó.

    2007-03-01

    We perform a systematic study, in eleven dimensional supergravity, of the geometry of wrapped brane configurations admitting AdS2 limits. Membranes wrapping holomorphic curves in Calabi-Yau manifolds are found to exhibit some novel features; in particular, for fourfolds or threefolds, the gravitational effect of the branes on the overall transverse space is only weakly restricted by the kinematics of the Killing spinor equation. We also study the AdS2 limits of the wrapped brane supergravity descriptions. For membranes wrapped in a two-fold, we derive a set of AdS2 supersymmetry conditions which upon analytic continuation coincide precisely with those for the half-BPS bubbling geometries of LLM. From membranes wrapped in a three-fold, we obtain a set of AdS2 supersymmetry conditions which upon analytic continuation describe a class of spacetimes which we identify as quarter-BPS bubbling geometries in M-theory, with SO(4) × SO(3) × U(1) isometry in Riemannian signature. We also study fivebranes wrapping a special lagrangian five-cycle in a fivefold, in the presence of membranes wrapping holomorphic curves, and employ the wrapped brane supersymmetry conditions to derive a classification of the general minimally supersymmetric AdS2 geometry in M-theory.

  10. AdS and Lifshitz scalar hairy black holes in Gauss-Bonnet gravity

    NASA Astrophysics Data System (ADS)

    Chen, Bin; Fan, Zhong-Ying; Zhu, Lu-Yao

    2016-09-01

    We consider Gauss-Bonnet (GB) gravity in general dimensions, which is nonminimally coupled to a scalar field. By choosing a scalar potential of the type V (ϕ )=2 Λ0+1/2 m2ϕ2+γ4ϕ4 , we first obtain large classes of scalar hairy black holes with spherical/hyperbolic/planar topologies that are asymptotic to locally anti- de Sitter (AdS) space-times. We derive the first law of black hole thermodynamics using Wald formalism. In particular, for one class of the solutions, the scalar hair forms a thermodynamic conjugate with the graviton and nontrivially contributes to the thermodynamical first law. We observe that except for one class of the planar black holes, all these solutions are constructed at the critical point of GB gravity where there exist unique AdS vacua. In fact, a Lifshitz vacuum is also allowed at the critical point. We then construct many new classes of neutral and charged Lifshitz black hole solutions for an either minimally or nonminimally coupled scalar and derive the thermodynamical first laws. We also obtain new classes of exact dynamical AdS and Lifshitz solutions which describe radiating white holes. The solutions eventually become AdS or Lifshitz vacua at late retarded times. However, for one class of the solutions, the final state is an AdS space-time with a globally naked singularity.

  11. Implementation of Recursion Relations in Gluon Scattering Amplitude Calculations in AdS4 /CFT3

    NASA Astrophysics Data System (ADS)

    Dokmetzoglou, Nikolaos; Kharel, Savan

    2017-01-01

    The Anti-de Sitter/Conformal Field Theory (AdS/CFT) correspondence is a duality between a theory of gravity in curved-space (AdS) and a conformally-invariant quantum field theory in flat-space (CFT). Scattering amplitudes are observables associated with the probability of the interaction of a given assembly of particles. Gluons, being the exchange particles associated with the strong nuclear force, which holds quarks together to form protons, are abundant byproducts of fundamental particle collisions. Thus, studying gluon scattering amplitudes is an effective way of deepening our understanding of these observables in AdS/CFT. Traditionally, Feynman diagrams have been used to calculate such scattering amplitudes. In this project, we use factorization properties and recursion relations to simplify these calculations. More specifically, we calculate multiple (different helicity combinations) four-point gluon scattering amplitudes in AdS4 /CFT3 (4-D AdS and 3-D CFT) as sums of products of three-point amplitudes. And then we calculate a five-point gluon scattering amplitude in AdS4 /CFT3 by decomposing it into a sum of products of these four-point and three-point amplitudes. Finally we comment on useful identities for checking these amplitudes. This work was supported by a Weinstein Davidson College Research Initiative Summer Research grant.

  12. Molecular basis for maintenance of fidelity during the CCA-adding reaction by a CCA-adding enzyme.

    PubMed

    Toh, Yukimatsu; Numata, Tomoyuki; Watanabe, Kazunori; Takeshita, Daijiro; Nureki, Osamu; Tomita, Kozo

    2008-07-23

    CCA-adding enzyme builds the 3'-end CCA of tRNA without a nucleic acid template. The mechanism for the maintenance of fidelity during the CCA-adding reaction remains elusive. Here, we present almost a dozen complex structures of the class I CCA-adding enzyme and tRNA mini-helices (mini-D(73)N(74), mini-D(73)N(74)C(75) and mini-D(73)C(74)N(75); D(73) is a discriminator nucleotide and N is either A, G, or U). The mini-D(73)N(74) complexes adopt catalytically inactive open forms, and CTP shifts the enzymes to the active closed forms and allows N(74) to flip for CMP incorporation. In contrast, unlike the catalytically active closed form of the mini-D(73)C(74)C(75) complex, the mini-D(73)N(74)C(75) and mini-D(73)C(74)N(75) complexes adopt inactive open forms. Only the mini-D(73)C(74)U(75) accepts AMP to a similar extent as mini-D(73)C(74)C(75), and ATP shifts the enzyme to a closed, active form and allows U(75) to flip for AMP incorporation. These findings suggest that the 3'-region of RNA is proofread, after two nucleotide additions, in the closed, active form of the complex at the AMP incorporation stage. This proofreading is a prerequisite for the maintenance of fidelity for complete CCA synthesis.

  13. Brick walls and AdS/CFT

    NASA Astrophysics Data System (ADS)

    Kay, Bernard S.; Ortíz, L.

    2014-05-01

    We discuss the relationship between the bulk-boundary correspondence in Rehren's algebraic holography (and in other `fixed-background', QFT-based, approaches to holography) and in mainstream string-theoretic `Maldacena AdS/CFT'. Especially, we contrast the understanding of black-hole entropy from the point of view of QFT in curved spacetime—in the framework of 't Hooft's `brick wall' model—with the understanding based on Maldacena AdS/CFT. We show that the brick-wall modification of a Klein-Gordon field in the Hartle-Hawking-Israel state on dimensional Schwarzschild AdS has a well-defined boundary limit with the same temperature and entropy as the brick-wall-modified bulk theory. One of our main purposes is to point out a close connection, for general AdS/CFT situations, between the puzzle raised by Arnsdorf and Smolin regarding the relationship between Rehren's algebraic holography and mainstream AdS/CFT and the puzzle embodied in the `complementarity principle' proposed by Mukohyama and Israel in their work on the brick-wall approach to black hole entropy. Working on the assumption that similar results will hold for bulk QFT other than the Klein-Gordon field and for Schwarzschild AdS in other dimensions, and recalling the first author's proposed resolution to the Mukohyama-Israel puzzle based on his `matter-gravity entanglement hypothesis', we argue that, in Maldacena AdS/CFT, the algebra of the boundary CFT is isomorphic only to a proper subalgebra of the bulk algebra, albeit (at non-zero temperature) the (GNS) Hilbert spaces of bulk and boundary theories are still the `same'—the total bulk state being pure, while the boundary state is mixed (thermal). We also argue from the finiteness of its boundary (and hence, on our assumptions, also bulk) entropy at finite temperature, that the Rehren dual of the Maldacena boundary CFT cannot itself be a QFT and must, instead, presumably be something like a string theory.

  14. Photon gas thermodynamics in dS and AdS momentum spaces

    NASA Astrophysics Data System (ADS)

    Gorji, M. A.; Hosseinzadeh, V.; Nozari, K.; Vakili, B.

    2016-07-01

    In this paper, we study thermostatistical properties of a photon gas in the framework of two deformed special relativity models defined by the cosmological coordinatizations of the de Sitter (dS) and anti-de Sitter (AdS) momentum spaces. The dS model is a doubly special relativity theory in which an ultraviolet length scale is invariant under the deformed Lorentz transformations. For the case of the AdS model, however, the Lorentz symmetry breaks at the high energy regime. We show that the existence of a maximal momentum in dS momentum space leads to maximal pressure and temperature at the thermodynamical level, while maximal internal energy and entropy arise for the case of the AdS momentum space due to the existence of a maximal kinematical energy. These results show that the thermodynamical duality of these models is very similar to their well-known kinematical duality.

  15. Black hole microstates in AdS4 from supersymmetric localization

    NASA Astrophysics Data System (ADS)

    Benini, Francesco; Hristov, Kiril; Zaffaroni, Alberto

    2016-05-01

    This paper addresses a long standing problem, the counting of the microstates of supersymmetric asymptotically AdS black holes in terms of a holographically dual field theory. We focus on a class of asymptotically AdS4 static black holes preserving two real supercharges which are dual to a topologically twisted deformation of the ABJM theory. We evaluate in the large N limit the topologically twisted index of the ABJM theory and we show that it correctly reproduces the entropy of the AdS4 black holes. An extremization of the index with respect to a set of chemical potentials is required. We interpret it as the selection of the exact R-symmetry of the superconformal quantum mechanics describing the horizon of the black hole.

  16. A note on vectorial AdS5/CFT4 duality for spin- j boundary theory

    NASA Astrophysics Data System (ADS)

    Bae, Jin-Beom; Joung, Euihun; Lal, Shailesh

    2016-12-01

    The vectorial holographic correspondences between higher-spin theories in AdS5 and free vector models on the boundary are extended to the cases where the latter is described by free massless spin- j field. The dual higher-spin theory in the bulk does not include gravity and can only be defined on rigid AdS5 background with S 4 boundary. We discuss various properties of these rather special higher-spin theories and calculate their one-loop free energies. We show that the result is proportional to the same quantity for spin- j doubleton treated as if it is a AdS5 field. Finally, we consider even more special case where the boundary theory itself is given by an infinite tower of massless higher-spin fields.

  17. QCD Condensates and Holographic Wilson Loops for Asymptotically AdS Spaces

    SciTech Connect

    Quevedo, R. Carcasses; Goity, Jose L.; Trinchero, Roberto C.

    2014-02-01

    The minimization of the Nambu-Goto (NG) action for a surface whose contour defines a circular Wilson loop of radius a placed at a finite value of the coordinate orthogonal to the border is considered. This is done for asymptotically AdS spaces. The condensates of dimension n = 2, 4, 6, 8, and 10 are calculated in terms of the coefficients in the expansion in powers of the radius a of the on-shell subtracted NG action for small a->0. The subtraction employed is such that it presents no conflict with conformal invariance in the AdS case and need not introduce an additional infrared scale for the case of confining geometries. It is shown that the UV value of the gluon condensates is universal in the sense that it only depends on the first coefficients of the difference with the AdS case.

  18. Stability of warped AdS3 vacua of topologically massive gravity

    NASA Astrophysics Data System (ADS)

    Anninos, Dionysios; Esole, Mboyo; Guica, Monica

    2009-10-01

    AdS3 vacua of topologically massive gravity (TMG) have been shown to be perturbatively unstable for all values of the coupling constant except the chiral point μl = 1. We study the possibility that the warped vacua of TMG, which exist for all values of μ, are stable under linearized perturbations. In this paper, we show that spacelike warped AdS3 vacua with Compère-Detournay boundary conditions are indeed stable in the range μl>3. This is precisely the range in which black hole solutions arise as discrete identifications of the warped AdS3 vacuum. The situation somewhat resembles chiral gravity: although negative energy modes do exist, they are all excluded by the boundary conditions, and the perturbative spectrum solely consists of boundary (pure large gauge) gravitons.

  19. Characterizing Corrosion Effects of Weak Organic Acids Using a Modified Bono Test

    NASA Astrophysics Data System (ADS)

    Zhou, Yuqin; Turbini, Laura J.; Ramjattan, Deepchand; Christian, Bev; Pritzker, Mark

    2013-12-01

    To meet environmental requirements and achieve benefits of cost-effective manufacturing, no-clean fluxes (NCFs) or low-solids fluxes have become popular in present electronic manufacturing processes. Weak organic acids (WOAs) as the activation ingredients in NCFs play an important role, especially in the current lead-free and halogen-free soldering technology era. However, no standard or uniform method exists to characterize the corrosion effects of WOAs on actual metallic circuits of printed wiring boards (PWBs). Hence, the development of an effective quantitative test method for evaluating the corrosion effects of WOAs on the PWB's metallic circuits is imperative. In this paper, the modified Bono test, which was developed to quantitatively examine the corrosion properties of flux residues, is used to characterize the corrosion effects of five WOAs (i.e., abietic acid, succinic acid, glutaric acid, adipic acid, and malic acid) on PWB metallic circuits. Experiments were performed under three temperature/humidity conditions (85°C/85% RH, 60°C/93% RH, and 40°C/93% RH) using two WOA solution concentrations. The different corrosion effects among the various WOAs were best reflected in the testing results at 40°C and 60°C. Optical microscopy was used to observe the morphology of the corroded copper tracks, and scanning electron microscopy (SEM) energy-dispersive x-ray (EDX) characterization was performed to determine the dendrite composition.

  20. 40 CFR 98.53 - Calculating GHG emissions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Adipic Acid Production § 98.53 Calculating GHG emissions. (a) You must determine annual N2O emissions from adipic acid production according to paragraphs (a)(1) or... adipic acid production units exhaust to a common abatement technology and/or emission point, you...

  1. 40 CFR 98.53 - Calculating GHG emissions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... adipic acid production (determined in paragraph (f) of this section) according to Equation E-3d of this... adipic acid production for unit “z” according to this Equation E-3d (metric tons). EFN 2 O = N2O... emissions from adipic acid production unit “z” according to Equation E-3d of this section (metric tons)....

  2. The generalization of charged AdS black hole specific volume and number density

    NASA Astrophysics Data System (ADS)

    Wang, Zi-Liang; He, Miao; Fang, Chao; Sun, Dao-Quan; Deng, Jian-Bo

    2017-04-01

    In this paper, by proposing a generalized specific volume, we restudy the P- V criticality of charged AdS black holes in the extended phase space. The results show that most of the previous conclusions can be generalized without change, but the ratio {\\tilde{ρ }}_c should be 3 {\\tilde{α }}/16 in general case. Further research on the thermodynamical phase transition of black hole leads us to a natural interpretation of our assumption, and more black hole properties can be generalized. Finally, we study the number density for charged AdS black hole in higher dimensions, the results show the necessity of our assumption.

  3. Warped AdS3 , dS3 , and flows from N =(0 ,2 ) SCFTs

    NASA Astrophysics Data System (ADS)

    O'Colgáin, Eoin

    2015-05-01

    We present the general form of all timelike supersymmetric solutions to three-dimensional U (1 )3 gauged supergravity, a known consistent truncation of string theory. We uncover a rich vacuum structure, including an infinite class of new timelike-warped AdS3 (Gödel) and timelike-warped dS3 critical points. We outline the construction of supersymmetric flows, driven by irrelevant scalar operators in the SCFT, which interpolate between critical points. For flows from AdS3 to Gödel, the natural candidate for the central charge decreases along the flow. Flows to timelike-warped dS3 exhibit topology change.

  4. The Status of AdS/QCD

    SciTech Connect

    Reece, Matthew

    2011-05-23

    In this talk I give a brief assessment of the 'AdS/QCD correspondence', its successes, and its failures. I begin with a review of the AdS/CFT correspondence, with an emphasis on why the large N, large 't Hooft coupling limit is necessary for a calculable theory. I then briefly discuss attempts to extrapolate this correspondence to QCD-like theories, stressing why the failure of the large 't Hooft coupling limit is more important than the breakdown of the large N expansion. I sketch how event shapes can manifest stringy physics, and close with some brief remarks on the prospects for future improvements.

  5. Advanced Optical A/D Converter

    DTIC Science & Technology

    1993-05-01

    before the receiver and separately by reducing the gain in the EDFA . It is important to note that the optical power level was varied while all the...could not exceed roughly 50% of the maximum power available at full gain from the EDFA . 4.2 Baseband-Mode Testing The single-channel system was also...AD-A275 663 Advanced Optical A/D Convert M.C. Hamilton, J.A. Bell, D.A. Leep, J.P. Lin The Boeing Company Boeing Defense and Space Group P.O. Box

  6. Methods for conversion of carbohydrates in ionic liquids to value-added chemicals

    DOEpatents

    Zhao, Haibo; Holladay, Johnathan E.

    2011-05-10

    Methods are described for converting carbohydrates including, e.g., monosaccharides, disaccharides, and polysaccharides in ionic liquids to value-added chemicals including furans, useful as chemical intermediates and/or feedstocks. Fructose is converted to 5-hydroxylmethylfurfural (HMF) in the presence of metal halide and acid catalysts. Glucose is effectively converted to HMF in the presence of chromium chloride catalysts. Yields of up to about 70% are achieved with low levels of impurities such as levulinic acid.

  7. The AD Nurse: Prepared to be Prepared

    ERIC Educational Resources Information Center

    Beverly, Lynne; Junker, Mary H.

    1977-01-01

    It is not enough for the new associate degree (AD) nursing graduate to know the theory and be willing to learn. She must also have some skill in providing basic nursing care. Examples of applicants, both ADNs and BSNs, are described to illustrate the nursing talent necessary to practice sensitively and effectively. (Editor/TA)

  8. Value-Added Analysis in Instruction

    ERIC Educational Resources Information Center

    Nicholson, Michael R.; Brown, Jeffrey R.

    2010-01-01

    Value-added data provide a viable alternative for gauging school effectiveness--one virtually free of the confounding effects of student demographics and other factors relating to student learning. How is it different from other measuring methods? It concentrates on growth, rather than attainment. This strengthens the concept and measurement of…

  9. Adding calcium improves lithium ferrite core

    NASA Technical Reports Server (NTRS)

    Lessoff, H.

    1969-01-01

    Adding calcium increases uniformity of grain growth over a wide range of sintering temperatures and reduces porosity within the grain. Ferrite cores containing calcium have square hysteresis loops and high curie temperatures, making them useful in coincident current memories of digital electronic computers.

  10. Higher Education Value Added Using Multiple Outcomes

    ERIC Educational Resources Information Center

    Milla, Joniada; Martín, Ernesto San; Van Bellegem, Sébastien

    2016-01-01

    In this article we develop a methodology for the joint value added analysis of multiple outcomes that takes into account the inherent correlation between them. This is especially crucial in the analysis of higher education institutions. We use a unique Colombian database on universities, which contains scores in five domains tested in a…

  11. Adding Users to the Website Design Process

    ERIC Educational Resources Information Center

    Tomeo, Megan L.

    2012-01-01

    Alden Library began redesigning its website over a year ago. Throughout the redesign process the students, faculty, and staff that make up the user base were added to the conversation by utilizing several usability test methods. This article focuses on the usability testing conducted at Alden Library and delves into future usability testing, which…

  12. Drag force in AdS/CFT

    SciTech Connect

    Gubser, Steven S.

    2006-12-15

    The AdS/CFT correspondence and a classical test string approximation are used to calculate the drag force on an external quark moving in a thermal plasma of N=4 super-Yang-Mills theory. This computation is motivated by the phenomenon of jet-quenching in relativistic heavy ion collisions.

  13. Value Added School Review Field Guide

    ERIC Educational Resources Information Center

    Alberta Education, 2009

    2009-01-01

    The "Value-Added School Review (VSR)" is an analytical model designed to assist schools in identifying and addressing opportunities for school improvement. The model works best when it is focused purposefully on students and the student learning outcomes as defined in the "Guide to Education". It complements the processes…

  14. "Value Added" Proves Beneficial to Teacher Prep

    ERIC Educational Resources Information Center

    Sawchuk, Stephen

    2012-01-01

    The use of "value added" information appears poised to expand into the nation's teacher colleges, with more than a dozen states planning to use the technique to analyze how graduates of training programs fare in classrooms. Supporters say the data could help determine which teacher education pathways produce teachers who are at least as…

  15. Imago Mundi, Imago AD, Imago ADNI

    PubMed Central

    2014-01-01

    Since the launch in 2003 of the Alzheimer’s Disease Neuroimaging Initiative (ADNI) in the USA, ever growing, similarly oriented consortia have been organized and assembled around the world. The various accomplishments of ADNI have contributed substantially to a better understanding of the underlying physiopathology of aging and Alzheimer’s disease (AD). These accomplishments are basically predicated in the trinity of multimodality, standardization and sharing. This multimodality approach can now better identify those subjects with AD-specific traits that are more likely to present cognitive decline in the near future and that might represent the best candidates for smaller but more efficient therapeutic trials – trials that, through gained and shared knowledge, can be more focused on a specific target or a specific stage of the disease process. In summary, data generated from ADNI have helped elucidate some of the pathophysiological mechanisms underpinning aging and AD pathology, while contributing to the international effort in setting the groundwork for biomarker discovery and establishing standards for early diagnosis of AD. PMID:25478022

  16. Making Schools Ad-Free Zones.

    ERIC Educational Resources Information Center

    Karpatkin, Rhoda H.; Holmes, Anita

    1995-01-01

    Advertisers spend billions to market so-called educational products, services, and viewpoints to vulnerable young consumers. Budget constraints are forcing educators to accept ads and promotional materials. Several education and consumer-interest groups are developing guidelines for using commercial materials in schools. Consumers Union developed…

  17. Cutting Budget Corners While Adding Value.

    ERIC Educational Resources Information Center

    Veile, Craig N.; Carpenter, Mark J.

    2000-01-01

    Discusses how one school district saved money while adding long- term value to its capital improvement project. Planning issues involving square footage requirements, quality of material to be used, and heating and cooling system selection are discussed as are concepts to increase student learning capacity for the same construction dollars. (GR)

  18. Test Scaling and Value-Added Measurement

    ERIC Educational Resources Information Center

    Ballou, Dale

    2009-01-01

    Conventional value-added assessment requires that achievement be reported on an interval scale. While many metrics do not have this property, application of item response theory (IRT) is said to produce interval scales. However, it is difficult to confirm that the requisite conditions are met. Even when they are, the properties of the data that…

  19. Distribution of Information in Ad Hoc Networks

    DTIC Science & Technology

    2007-09-01

    INTENTIONALLY LEFT BLANK v ABSTRACT Ad-hoc networks are distributed, self-organized networks which do not need a fixed infrastructure. Entities in...73 V . CONCLUSIONS AND FUTURE WORK ............................75 A. OVERVIEW ..........................................75 B. CONCLUSIONS...statistical analysis on the results. Finally, Chapter V concludes the research and provides suggestions for further research. 7 II. BACKGROUND A

  20. "Value Added" Gauge of Teaching Probed

    ERIC Educational Resources Information Center

    Viadero, Debra

    2009-01-01

    A new study by a public and labor economist suggests that "value added" methods for determining the effectiveness of classroom teachers are built on some shaky assumptions and may be misleading. The study, due to be published in February in the "Quarterly Journal of Economics," is the first of a handful of papers now in the…