Study for the degumming pretreatment of rubber seed oil

NASA Astrophysics Data System (ADS)

Li, X. Y.; Chen, Y. B.; Zhang, X.; Souliyathai, D.; Yang, S. P.; Wang, Q.

2017-11-01

With the rapid development of the aviation industry, appearing of the aviation carbon tax and the increasingly serious environmental problems have forced the world to research the development of renewable bio-aviation fuel. Renewable biological aviation fuel contains phosphorus that could reduce the synthesis of noble metal catalysts such as Pd, Pt activity. In order to get low content of phosphorus in degummed oil of non-edible vegetable oil, in this paper, with rubber seed oil as raw material, making the experiment of single factor at the influence of temperature, stirring speed, adding amount of monoethanolamine (MEA) and water amount. The experimental results show that the added amount of MEA is 2.5% in the weight of oil, and temperature is 60°C, while the amount of added water is 2% in the weight of oil, reaction time is 40 min, and stirring speed is 200 r/min. Under these conditions, the phosphorus content of rubber seed oil can be reduced to below 3 mg/kg, degumming rate is 91.37%, and the degumming effects are obvious, which also provides some foundation for follow-up studies.

[Effects of adding straw carbon source to root knot nematode diseased soil on soil microbial biomass and protozoa abundance].

PubMed

Zhang, Si-Hui; Lian, Jian-Hong; Cao, Zhi-Ping; Zhao, Li

2013-06-01

A field experiment with successive planting of tomato was conducted to study the effects of adding different amounts of winter wheat straw (2.08 g x kg(-1), 1N; 4.16 g x kg(-1), 2N; and 8.32 g x kg(-1), 4N) to the soil seriously suffered from root knot nematode disease on the soil microbial biomass and protozoa abundance. Adding straw carbon source had significant effects on the contents of soil microbial biomass carbon (MBC) and microbial biomass nitrogen (MBN) and the abundance of soil protozoa, which all decreased in the order of 4N > 2N > 1N > CK. The community structure of soil protozoa also changed significantly under straw addition. In the treatments with straw addition, the average proportion of fagellate, amoeba, and ciliates accounted for 36.0%, 59.5%, and 4.5% of the total protozoa, respectively. Under the same adding amounts of wheat straw, there was an increase in the soil MBC and MBN contents, MBC/MBN ratio, and protozoa abundance with increasing cultivation period.

Analysis of sharpness increase by image noise

NASA Astrophysics Data System (ADS)

Kurihara, Takehito; Aoki, Naokazu; Kobayashi, Hiroyuki

2009-02-01

Motivated by the reported increase in sharpness by image noise, we investigated how noise affects sharpness perception. We first used natural images of tree bark with different amounts of noise to see whether noise enhances sharpness. Although the result showed sharpness decreased as noise amount increased, some observers seemed to perceive more sharpness with increasing noise, while the others did not. We next used 1D and 2D uni-frequency patterns as stimuli in an attempt to reduce such variability in the judgment. The result showed, for higher frequency stimuli, sharpness decreased as the noise amount increased, while sharpness of the lower frequency stimuli increased at a certain noise level. From this result, we thought image noise might reduce sharpness at edges, but be able to improve sharpness of lower frequency component or texture in image. To prove this prediction, we experimented again with the natural image used in the first experiment. Stimuli were made by applying noise separately to edge or to texture part of the image. The result showed noise, when added to edge region, only decreased sharpness, whereas when added to texture, could improve sharpness. We think it is the interaction between noise and texture that sharpens image.

Effect of added thiamine on the key odorant compounds and aroma of cooked ham.

PubMed

Thomas, Caroline; Mercier, Frédéric; Tournayre, Pascal; Martin, Jean-Luc; Berdagué, Jean-Louis

2015-04-15

This study shows that thiamine plays a major role in the formation of three key odorants of cooked ham: 2-methyl-3-furanthiol, 2-methyl-3-methyldithiofuran, and bis(2-methyl-3-furyl)disulphide. Analyses revealed that under identical cooking conditions, the productions of these three aroma compounds increase in a closely intercorrelated way when the dose of thiamine increases. Using a specific 2-methyl-3-furanthiol extraction-quantification method, it was possible to relate the amounts of thiamine added in model cooked hams to the amounts of 2-methyl-3-furanthiol produced in the cooking process. Sensory analyses highlighted the role of thiamine as a precursor of cooked ham aroma. Copyright © 2014 Elsevier Ltd. All rights reserved.

Increased transepidermal water loss and decreased ceramide content in lesional and non-lesional skin of dogs with atopic dermatitis.

PubMed

Shimada, Kenichiro; Yoon, Ji-Seon; Yoshihara, Toru; Iwasaki, Toshiroh; Nishifuji, Koji

2009-10-01

This study evaluated changes in transepidermal water loss (TEWL), skin hydration and intercorneal lipid content in dogs with atopic dermatitis (AD). TEWL and skin hydration were measured in the inguinal skin of 10 dogs with AD and 30 normal dogs. TEWL was significantly higher in both lesional skin (94.3 +/- 38.8 g/m(2)/h) and non-lesional skin (28.8 +/- 9.5) of dogs with AD than healthy controls (12.3 +/- 2.3) (P < 0.05). Water content in the lesional skin of dogs with AD (15.8 +/- 7.0 AU) was significantly lower than that of controls (24.2 +/- 8.8) (P < 0.05), whereas no significant differences were recognized in water content between non-lesional skin of dogs with AD and controls. To compare the lipid content between lesional and non-lesional skin of dogs with AD and controls, intercorneal lipids, extracted from the stratum corneum, were quantified by thin-layer chromatography. The relative amounts of ceramides in the lesional skin (24.4 +/- 5.6%) and non-lesional skin (25.6 +/- 3.8%) of dogs with AD were significantly lower than those in controls (31.4 +/- 6.9%) (P < 0.05). Conversely, no significant differences were recognized in the relative amounts of cholesterols and free fatty acids (FFA) between dogs with AD and controls. Moreover, there are statistical correlations between TEWL and the relative amounts of ceramides, but not those of cholesterols and FFA, in both lesional and non-lesional skin of dogs with AD. These results strongly suggest that decreased ceramide content accelerates TEWL in dogs with AD, similar to the situation seen in the corresponding human disease.

Nonbranded or branded direct-to-consumer prescription drug advertising-which is more effective?

PubMed

Rollins, Brent L; King, Karen; Zinkhan, George; Perri, Matthew

2011-01-01

Recently, pharmaceutical manufacturers have increased the amount of nonbranded, disease-education focused, direct-to-consumer advertisements. A comparison to branded, product-specific, ads was examined through a series of survey questions measuring consumer attitudes and the role of involvement. Nonbranded ads compared favorably to branded ads and should remain a viable part of the marketing mix. Consumers' level of disease state involvement was the strongest determinant of attitudes overall and within the two ad groupings, as highly involved consumers had significantly more positives attitudes regarding the nonbranded ads. Regardless of involvement level, however, nonbranded ads maintained positive attitude levels.

Effect of adding powder on joint properties of laser penetration welding for dual phase steel and aluminum alloy

NASA Astrophysics Data System (ADS)

Zhou, D. W.; Liu, J. S.; Lu, Y. Z.; Xu, S. H.

2017-09-01

The experiments of laser penetration welding for dual phase steel and aluminum alloy were carried out, and the effect of adding Mn or Si powder on mechanical properties and microstructure of the weld was investigated. Some defects, such as spatter, inclusion, cracks and softening in heat affected zone (HAZ), can be avoided in welding joints, and the increased penetration depth is obtained by adding Mn or Si powder. The average tensile-shear strength of Si-added joint is 3.84% higher than that of Mn-added joint, and the strength of both joints exceeds that of no-added joint. In the case of adding Mn powder, small amount of liquid Al is mixed into steel molten pool, and the Al content increases in both sides of the weld, which leads to the increased weld width in aluminum molten pool. Thus, transverse area increases in jointing steel to aluminum, which is significant for the improved tensile-shear strength of joints. As far as adding Si powder is concerned, it is not the case, the enhancement of the joint properties benefits from improvement of metallurgical reaction.

Clustering and age of onset in familial late onset Alzheimer`s disease are determined at the apoliopoprotein E locus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlden, H.; Rossor, M.

1994-09-01

Recent work has demonstrated that the apolipoprotein E (ApoE) genotype is of great importance in the etiology of Alzheimer`s disease (AD). Thus, inheritance of the ApoE4 allele predisposes to the occurrences of late onset disease and decreases the onset age in families with pathogenic mutations in the amyloid precursor protein gene. We analysed ApoE genotypes in 35 families multiply affected by AD and confirm that familial clustering in late onset AD is associated with the ApoE4 allele. This allele occurs in the great majority (82%) of late onset familial Alzheimer cases. Elderly unaffected sibs (80-90 years) have an allele frequencymore » that is not significantly different to that of normal controls. Data presented from our family sets together previously published data is suggestive that the effect of a single ApoE4 allele is to increase the risk of developing AD by an amount equivalent to 5 years and that the effect of ApoE4 homozygosity is to increase the risk of developing AD by an amount equivalent to 10 years of age. Data shows significant difference between the frequency of the ApoE4 allele in the familial AD probands and controls and in both sets of unaffected sibs, p<0.01.« less

Effects of nano-SiO(2) and different ash particle sizes on sludge ash-cement mortar.

PubMed

Lin, K L; Chang, W C; Lin, D F; Luo, H L; Tsai, M C

2008-09-01

The effects of nano-SiO(2) on three ash particle sizes in mortar were studied by replacing a portion of the cement with incinerated sewage sludge ash. Results indicate that the amount of water needed at standard consistency increased as more nano-SiO(2) was added. Moreover, a reduction in setting time became noticeable for smaller ash particle sizes. The compressive strength of the ash-cement mortar increased as more nano-SiO(2) was added. Additionally, with 2% nano-SiO(2) added and a cure length of 7 days, the compressive strength of the ash-cement mortar with 1 microm ash particle size was about 1.5 times better that of 75microm particle size. Further, nano-SiO(2) functioned to fill pores for ash-cement mortar with different ash particle sizes. However, the effects of this pore-filling varied with ash particle size. Higher amounts of nano-SiO(2) better influenced the ash-cement mortar with larger ash particle sizes.

Effects of additional milk replacer feeding on calf health, growth, and selected blood metabolites in calves.

PubMed

Quigley, J D; Wolfe, T A; Elsasser, T H

2006-01-01

The objective of the experiment was to evaluate effects of increased milk replacer feeding on growth, intake, feed efficiency, and health parameters in stressed calves. Holstein bull calves (n = 120; approximately 3 to 8 d of age) were purchased from sale barns and dairy farms and housed in fiberglass hutches. In addition, wood shavings contaminated with coronavirus were mixed with clean shavings and added to each hutch before the start of the experiment. Calves were fed either a fixed amount (454 g/d) of a 20% crude protein (CP), 20% fat milk replacer to weaning at 28 d or a variable amount (454, 681, 908, and 454 g/d on d 0 to 7, 8 to 14, 15 to 31, and 32 to 41, respectively) of a milk replacer containing 28% CP and 17% fat without or with added dietary supplement containing bovine serum. Calves were also fed commercial calf starter and water ad libitum. Plasma IgG concentration in most calves on arrival at the facility was < 10 g/L. Intake, change in body weight, feed efficiency, morbidity and mortality, and selected plasma metabolites were determined. Body weight at 28 d, 56 d, daily body weight gain, intake of milk replacer, fecal scores, days with diarrhea, and days treated with antibiotics were increased with feeding variable amount of milk replacer over the 56-d study. Starter intake from d 1 to 56 was reduced from 919 to 717 g/d in calves fed fixed and variable amounts of milk replacer, respectively. Morbidity, measured as the number of days that calves had diarrhea, was increased by 53% when a variable amount of milk replacer was fed. Calves fed variable milk replacer were treated with antibiotics for 3.1 d compared with 1.9 d for calves fed 454 g of milk replacer/d. Concentrations of plasma glucose, urea N, and insulin-like growth factor-I were increased when calves were fed variable amount of milk replacer. Dietary supplement containing bovine serum had no effect on any parameter measured. There was no effect of milk replacer feeding on concentrations of nonesterified fatty acids, total protein, or growth hormone concentrations. Plasma tumor necrosis factor-alpha was highest in calves with the highest plasma IgG concentrations on the day of arrival and might be related to the calf's ability to identify pathogens in the environment. Under conditions of this study, calves fed variable amount of milk replacer and exposed to immunological challenge before weaning had greater BW gain, but also increased incidence of diarrhea that required added veterinary treatments.

[Effect of five kinds of pigments on the chromaticity of dental zirconia ceramic].

PubMed

Huang, Hui; Zheng, Yuan-li; Zhang, Fu-qiang; Sun, Jing; Gao, Lian

2007-08-01

All-ceramic dental restorations should match the colour of the natural teeth in order to fulfill aesthetic demands. The goal of this study was to evaluate the colouration of zirconia ceramic by adding five kinds of pigments. The influence of the pigments concentrations on the chromaticity were also analysed. Different concentrations of five kinds of pigments were added on zirconia powder, then compacted at 200MPa using cold isostatic pressure, sintered to 1400 degrees centigrade and hold for two hours. The chromaticity of sintered bodies were measured with chroma meter. The colours achieved by the different pigments were presented in the CIELab system. The a* value increased with the added amount of Er(2)O(3), while b* value raised with the increasing amount of CeO(2) and Pr(6)O(11). However, three pigments failed to decrease L* value and the sintered body looked too bright. The sintered bodies were brown when adding Fe(2)O(3) to zirconia. Adding MnO2 could decrease the L* value of sintered bodies significantly, but had little influence on the a* and b* value. Five kinds of colorized zirconia ceramic could cover with the chromaticity range of dental ceramic which necessitate further investigation.

Influence of extreme concentrations of hydrophilic pore-former on reinforced polyethersulfone ultrafiltration membranes for reduction of humic acid fouling.

PubMed

Son, Moon; Kim, Hayoung; Jung, Junhyeok; Jo, Sungsoo; Choi, Heechul

2017-07-01

To address the issue of membrane fouling by ubiquitous humic substances, a hydrophilic pore-former-blended polyethersulfone UF membrane was successfully synthesized via the phase inversion method. For the first time, extremely high concentrations of polyvinylpyrrolidone (PVP), up to 20 wt%, were tested as the hydrophilic pore-former in order to determine the optimum concentration for humic acid fouling. Intrinsic membrane parameters such as permeability and selectivity were evaluated using a cross-flow UF filtration setup. Interestingly, as little as 1 wt% added PVP can significantly improve membrane permeability. That tiny amount of added PVP increased membrane flux to 1107 L/m 2 h·bar from zero flux, with over 90% rejection of humic acid. In addition, pure water permeation increased to over 2400 L/m 2 h·bar without sacrificing humic acid rejection (around 90%) when 10 wt% PVP was added; pure water permeation decreased to around 1000 L/m 2 h·bar as added PVP was increased to 20 wt%. The order of water flux increased with the amount of added PVP up to 20 wt% during humic acid fouling while maintaining membrane selectivity. However, the membrane with 10 wt% added PVP showed the best fouling resistance in terms of flux recovery ratio (98%), total flux loss, reversible fouling ratio, and irreversible fouling ratio. Therefore, the addition of 10 wt% PVP is recommended considering cleaning efficiency and the moderately high flux during humic acid fouling for field operation in wastewater reclamation and water treatment processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of rice bran on sensory and physico-chemical properties of emulsified pork meatballs.

PubMed

Huang, S C; Shiau, C Y; Liu, T E; Chu, C L; Hwang, D F

2005-08-01

Four kinds of bran, which are milled from important rice cultivators in Taiwan, have high contents of dietary fiber, fat and protein. The use of rice bran in Kung-wan, an emulsified pork meatball, was investigated. It was found that protein and fat contents, and white index of meatballs decreased as the amount of bran increased. A texture profile analysis (TPA) also indicated the hardness, gumminess and chewiness of the Kung-wan decreased. The sensory scores of taste, texture and overall acceptability of meatballs with less than 10% added bran showed no significant difference from those for meatballs without bran. However, the added amount of 15% enriched meatballs resulted in inferior sensory scores. The bran's particle size profoundly affected the sensory and physico-chemical properties of the meat products. Meatballs enriched with smaller bran particles possessed higher TPA indices and sensory scores than those added with larger ones. No significant differences in proximate composition, cooking yield, color and sensory quality were found among emulsified meatballs enriched with four different kinds of bran. Conclusively, the suitable amount of rice bran that should be added to emulsified pork meatballs was less than 10% and a smaller particle size would result in better quality.

Phytoavailability and extractability of potassium, magnesium and manganese in calcareous soil amended with olive oil wastewater.

PubMed

Gallardo-Lara, F; Azcón, M; Polo, A

2000-09-01

Land disposal of olive oil wastewater using it as a soil amendment requires a knowledge of the effects that its application may produce on the status of the mineral nutrients in the plant-soil system. A pot experiment using calcareous soil was performed in a growth chamber to examine the effects of olive oil wastewater on the availability and postharvest soil extractability of K, Mg and Mn. The experiment included 6 treatments: two rates of olive oil wastewater, two mineral fertilizer treatments containing K (which supplied K in amounts equivalent to the K supplied by the olive oil wastewater treatments), a K-free mineral fertilizer treatment, and a control. The pots were sown with ryegrass as the test plant, harvesting 3 times at intervals of one month. Olive oil wastewater has demonstrated a considerable capacity for supplying K that can be assimilated by the plant, tending in fact to surpass the mineral potassium fertilizer tested. The application of olive oil wastewater tends to reduce the concentration of Mg in the plant, similarly to the effect of adding mineral potassium fertilizer. An enhancement of Mn availability takes place in the soil amended with olive oil wastewater, which on occasion has produced Mn concentrations in plant that could be considered phytotoxic or at least excessive. After harvesting, we observed an increase in the amount of exchangeable K in soil with added industrial wastewater. However, these increases are lower than those in soil treated with mineral potassium fertilizer. The levels of exchangeable, carbonate-bound, organic-bound and residual Mg in soil were higher in treatments incorporating olive oil wastewater than in those with added mineral K, with the opposite tendency occurring in the amount of Fe-Mn oxides-bound Mg in soil. Treatments based on olive oil wastewater, especially in high doses, increased the amount of exchangeable and carbonate-bound Mn in soil, in comparison with treatments adding mineral fertilizers with or without K. In contrast, the addition of industrial wastewater caused a drop in the amount of Fe-Mn oxides-bound and organic-bound Mn in soil.

Relative increase in Alzheimer's disease of soluble forms of cerebral Abeta amyloid protein precursor containing the Kunitz protease inhibitory domain.

PubMed

Moir, R D; Lynch, T; Bush, A I; Whyte, S; Henry, A; Portbury, S; Multhaup, G; Small, D H; Tanzi, R E; Beyreuther, K; Masters, C L

1998-02-27

Although a number of studies have examined amyloid precursor protein (APP) mRNA levels in Alzheimer's disease (AD), no clear consensus has emerged as to whether the levels of transcripts for isoforms containing a Kunitz protease inhibitory (KPI)-encoded region are increased or decreased in AD. Here we compare AD and control brain for the relative amounts of APP protein containing KPI to APP protein lacking this domain. APP protein was purified from the soluble subcellular fraction and Triton X-100 membrane pellet extract of one hemisphere of AD (n = 10), normal (n = 7), and neurological control (n = 5) brains. The amount of KPI-containing APP in the purified protein samples was determined using two independent assay methods. The first assay exploited the inhibitory action of KPI-containing APP on trypsin. The second assay employed reflectance analysis of Western blots. The proportion of KPI-containing forms of APP in the soluble subcellular fraction of AD brains is significantly elevated (p < 0.01) compared with controls. Species containing a KPI domain comprise 32-41 and 76-77% of purified soluble APP from control and AD brains, respectively. For purified membrane-associated APP, 72-77 and 65-82% of control and AD samples, respectively, contain a KPI domain. Since KPI-containing species of APP may be more amyloidogenic (Ho, L., Fukuchi, K., and Yonkin, S. G. (1996) J. Biol. Chem. 271, 30929-30934), our findings support an imbalance of isoforms as one possible mechanism for amyloid deposition in sporadic AD.

Added Sugars and Cardiovascular Disease Risk in Children: A Scientific Statement From the American Heart Association.

PubMed

Vos, Miriam B; Kaar, Jill L; Welsh, Jean A; Van Horn, Linda V; Feig, Daniel I; Anderson, Cheryl A M; Patel, Mahesh J; Cruz Munos, Jessica; Krebs, Nancy F; Xanthakos, Stavra A; Johnson, Rachel K

2017-05-09

Poor lifestyle behaviors are leading causes of preventable diseases globally. Added sugars contribute to a diet that is energy dense but nutrient poor and increase risk of developing obesity, cardiovascular disease, hypertension, obesity-related cancers, and dental caries. For this American Heart Association scientific statement, the writing group reviewed and graded the current scientific evidence for studies examining the cardiovascular health effects of added sugars on children. The available literature was subdivided into 5 broad subareas: effects on blood pressure, lipids, insulin resistance and diabetes mellitus, nonalcoholic fatty liver disease, and obesity. Associations between added sugars and increased cardiovascular disease risk factors among US children are present at levels far below current consumption levels. Strong evidence supports the association of added sugars with increased cardiovascular disease risk in children through increased energy intake, increased adiposity, and dyslipidemia. The committee found that it is reasonable to recommend that children consume ≤25 g (100 cal or ≈6 teaspoons) of added sugars per day and to avoid added sugars for children <2 years of age. Although added sugars most likely can be safely consumed in low amounts as part of a healthy diet, few children achieve such levels, making this an important public health target. © 2017 American Heart Association, Inc.

Added Sugars and Cardiovascular Disease Risk in Children

PubMed Central

Vos, Miriam B.; Kaar, Jill L.; Welsh, Jean A.; Van Horn, Linda V.; Feig, Daniel I.; Anderson, Cheryl A.M.; Patel, Mahesh J.; Munos, Jessica Cruz; Krebs, Nancy F.; Xanthakos, Stavra A.; Johnson, Rachel K.

2017-01-01

BACKGROUND Poor lifestyle behaviors are leading causes of preventable diseases globally. Added sugars contribute to a diet that is energy dense but nutrient poor and increase risk of developing obesity, cardiovascular disease, hypertension, obesity-related cancers, and dental caries. METHODS AND RESULTS For this American Heart Association scientific statement, the writing group reviewed and graded the current scientific evidence for studies examining the cardiovascular health effects of added sugars on children. The available literature was subdivided into 5 broad subareas: effects on blood pressure, lipids, insulin resistance and diabetes mellitus, nonalcoholic fatty liver disease, and obesity. CONCLUSIONS Associations between added sugars and increased cardiovascular disease risk factors among US children are present at levels far below current consumption levels. Strong evidence supports the association of added sugars with increased cardiovascular disease risk in children through increased energy intake, increased adiposity, and dyslipidemia. The committee found that it is reasonable to recommend that children consume ≤25 g (100 cal or ≈6 teaspoons) of added sugars per day and to avoid added sugars for children <2 years of age. Although added sugars most likely can be safely consumed in low amounts as part of a healthy diet, few children achieve such levels, making this an important public health target. PMID:27550974

26 CFR 1.6662-5 - Substantial and gross valuation misstatements under chapter 1.

Code of Federal Regulations, 2010 CFR

2010-04-01

... is added to the tax an amount equal to 20 percent of such portion. Section 6662(h) increases the... value or adjusted basis of any property claimed on a return of tax imposed under chapter 1 is 400... TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Additions to the Tax, Additional Amounts, and...

Impact of condensed tannin size as individual and mixed polymers on bovine serum albumin precipitation.

PubMed

Harbertson, James F; Kilmister, Rachel L; Kelm, Mark A; Downey, Mark O

2014-10-01

Condensed tannins composed of epicatechin from monomer to octamer were isolated from cacao (Theobroma cacao, L.) seeds and added to bovine serum albumin (BSA) individually and combined as mixtures. When added to excess BSA the amount of tannin precipitated increased with tannin size. The amount of tannin required to precipitate BSA varied among the polymers with the trimer requiring the most to precipitate BSA (1000 μg) and octamer the least (50 μg). The efficacy of condensed tannins for protein precipitation increased with increased degree of polymerisation (or size) from trimers to octamers (monomers and dimers did not precipitate BSA), while mixtures of two sizes primarily had an additive effect. This study demonstrates that astringent perception is likely to increase with increasing polymer size. Further research to expand our understanding of astringent perception and its correlation with protein precipitation would benefit from sensory analysis of condensed tannins across a range of polymer sizes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Do Doppler color flow algorithms for mapping disturbed flow make sense?

PubMed

Gardin, J M; Lobodzinski, S M

1990-01-01

It has been suggested that a major advantage of Doppler color flow mapping is its ability to visualize areas of disturbed ("turbulent") flow, for example, in valvular stenosis or regurgitation and in shunts. To investigate how various color flow mapping instruments display disturbed flow information, color image processing was used to evaluate the most common velocity-variance color encoding algorithms of seven commercially available ultrasound machines. In six of seven machines, green was reportedly added by the variance display algorithms to map areas of disturbed flow. The amount of green intensity added to each pixel along the red and blue portions of the velocity reference color bar was calculated for each machine. In this study, velocities displayed on the reference color bar ranged from +/- 46 to +/- 64 cm/sec, depending on the Nyquist limit. Of note, changing the Nyquist limits depicted on the color reference bars did not change the distribution of the intensities of red, blue, or green within the contour of the reference map, but merely assigned different velocities to the pixels. Most color flow mapping algorithms in our study added increasing intensities of green to increasing positive (red) or negative (blue) velocities along their color reference bars. Most of these machines also added increasing green to red and blue color intensities horizontally across their reference bars as a marker of increased variance (spectral broadening). However, at any given velocity, marked variations were noted between different color flow mapping instruments in the amount of green added to their color velocity reference bars.(ABSTRACT TRUNCATED AT 250 WORDS)

Sucrose consumption in Thai undergraduate students.

PubMed

Promdee, Limthong; Trakulthong, Jindara; Kangwantrakul, Wisut

2007-01-01

Highly added sugar diets have been associated with various health problems such as dental caries, dyslipidemia, obesity and poor quality of life. Unfortunately, sugar consumption, especially sucrose, has increased continuously worldwide. The purpose of the study was to examine sources of sugar consumption and amount of added sucrose consumed in Thai undergraduate students. This study was carried out at Khon Kaen University, Thailand, between the years 2004-2005. A complete 3-day record of items and amounts of sweet consumption were obtained from 202 individuals--38 male and 164 female students. Added sucrose content of each sweetened food and drinks referred to in the record was determined by an enzymatic method. Mean intakes of sucrose were calculated from the sucrose content. The average of sucrose consumption in all subjects was 69+/-38 g/day, ranged from 4 to 182 g/day or 17 teaspoons of added sucrose per day. This amount accounted for 13.8% of total daily energy intake. There was a record of 337 kinds of sweetened foods and drinks found. The major source of added sucrose consumption was sweetened beverage, which was consumed 118 g/day averagely, or 60% of daily sugar consumption. Intake of sucrose per day in both male and female was not statistically difference, neither among different BMI groups. Intake of added sugar in the students was higher than the recommendation of the World Health Organization. These data would be helpful in a health promotion campaign aimed at a reduction of sugar consumption in Thai undergraduate students.

The efficacy of sugar labeling formats: Implications for labeling policy.

PubMed

Vanderlee, Lana; White, Christine M; Bordes, Isabelle; Hobin, Erin P; Hammond, David

2015-12-01

To examine knowledge of sugar recommendations and test the efficacy of formats for labeling total and added sugar on pre-packaged foods. Online surveys were conducted among 2008 Canadians aged 16-24. Participants were asked to identify recommended limits for total and added sugar consumption. In Experiment 1, participants were randomized to one of six labeling conditions with varying information for total sugar for a high- or low-sugar product and were asked to identify the relative amount of total sugar in the product. In Experiment 2, participants were randomized to one of three labels with different added sugar formats and were asked if the product contained added sugar and the relative amount of added sugar. Few young people correctly identified recommendations for total sugar (5%) or added sugar (7%). In Experiment 1, those who were shown percent daily value information were more likely to correctly identify the relative amount of total sugar (P < 0.05). In Experiment 2, those shown added sugar information were more likely to correctly identify that the product contained added sugar and the relative amount of added sugar in the product (P < 0.05). Improved labeling may improve consumer understanding of the amount of sugars in food products. © 2015 The Obesity Society.

Sensitivity of the xerophytic moss Syntrichia caninervis to prolonged simulated nitrogen deposition.

PubMed

Zhang, Yuanming; Zhou, Xiaobing; Yin, Benfeng; Downing, Alison

2016-06-01

Biological soil crusts, comprising assemblages of cyanobacteria, fungi, lichens and mosses, are common in dryland areas and are important elements in these ecosystems. Increasing N deposition has led to great changes in community structure and function in desert ecosystems worldwide. However, it is unclear how moss crusts respond to increased atmospheric N deposition, especially in terms of growth and physiological parameters. The aim of this study was to understand how Syntrichia caninervis, a dominant species in moss crusts in many northern hemisphere desert ecosystems, responds to added N. The population and shoot growth, and physiological responses of S. caninervis to six different doses of simulated N deposition (0, 0·3, 0·5, 1·0, 1·5 and 3·0 g N m(-2) year(-1)) were studied over a 3 year period. Low amounts of added N increased shoot length and leaf size, whereas high doses reduced almost all growth parameters. Moss shoot density increased, but population biomass decreased with high N. Low N augmented chlorophyll b, total chlorophyll content and soluble protein concentrations, but not chlorophyll a or chlorophyll fluorescence. High N was detrimental to all these indices. Soluble sugar concentration declined with increased N, but proline concentration was not affected significantly. Antioxidant enzyme activities generally decreased with low N additions and increased with high doses of simulated N deposition. Low amounts of added N (0-0·5 g N m(-2) year(-1)) may enhance moss growth and vitality, while higher amounts have detrimental effects. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Effect of charcoal amendment on adsorption, leaching and degradation of isoproturon in soils

NASA Astrophysics Data System (ADS)

Si, Youbin; Wang, Midao; Tian, Chao; Zhou, Jing; Zhou, Dongmei

2011-04-01

The effects of charcoal amendment on adsorption, leaching and degradation of the herbicide isoproturon in soils were studied under laboratory conditions. The adsorption data all fitted well with the Freundlich empirical equation. It was found that the adsorption of isoproturon in soils increased with the rate of charcoal amended (correlation coefficient r = 0.957 **, P < 0.01). The amount of isoproturon in leachate decreased with the increase of the amount of charcoal addition to soil column, while the retention of isoproturon in soils increased with an increase in the charcoal content of soil samples. Biodegradation was still the most significant mechanism for isoproturon dissipation from soil. Charcoal amendment greatly reduced the biodegradation of isoproturon in soils. The half-lives of isoproturon degradation ( DT50) in soils greatly extended when the rate of added charcoal inceased from 0 to 50 g kg - 1 (for Paddy soil, DT50 values increased from 54.6 to 71.4 days; for Alfisol, DT50 from 16.0 to 136 days; and for Vertisol, DT50 from 15.2 to 107 days). The degradation rate of isoproturon in soils was significantly negatively correlated with the amount of added charcoal. This research suggests that charcoal amendment may be an effective management practice for reducing pesticide leaching and enhancing its persistence in soils.

Mary Poppins was right: Adding small amounts of sugar or salt reduces the bitterness of vegetables.

PubMed

Bakke, Alyssa J; Stubbs, Cody A; McDowell, Elliott H; Moding, Kameron J; Johnson, Susan L; Hayes, John E

2018-07-01

Only a quarter of adults and 7% of children consume recommended amounts of vegetables each day. Often vegetables are not initially palatable due to bitterness, which may lead children and adults to refuse to taste or eat them. The objective of this research was to determine if very small amounts of sugar or salt (common household ingredients) could lead to significant reductions in bitterness intensity and increased hedonic ratings of green vegetable purees. For Experiment 1, three different green vegetable purees (broccoli, spinach, and kale) were prepared with different levels of sugar (0%, 0.6%, 1.2%, and 1.8%) or salt (0 and 0.2%). Samples were evaluated using standard descriptive analysis techniques with nine adults who completed more than 20 h of green vegetable specific training as a group. For Experiment 2, each vegetable puree was prepared with either 0% or 2% sugar, and bitterness was assessed via a forced choice task with 84 adults. For Experiment 3, each vegetable puree was prepared with 0%, 1%, or 2% sugar and rated for liking on standard 9 point hedonic scales by 99 adults. Experiments 1 and 2 showed that addition of small amounts of sugar and salt each reduced the bitterness (and increased sweetness and saltiness) from all three vegetables without altering other sensory properties (e.g. texture or aroma). Experiment 3 showed that adding sugar to vegetable purees increased hedonic ratings for adult consumers. We also found parents had mixed attitudes about the idea of adding sugar to foods intended for infants and toddlers. Further research on the effects of bitterness masking especially for specific populations (e.g., infants and young children or adults who have higher sensitivity to bitter taste) is warranted. Copyright © 2018 Elsevier B.V. All rights reserved.

Metallic glass composition

DOEpatents

Kroeger, Donald M.; Koch, Carl C.

1986-01-01

A metallic glass alloy that is either iron-based or nickel-based or based on a mixture of iron and nickel, containing lesser amounts of elements selected from the group boron, silicon carbon and phosphorous to which is added an amount of a ductility enhancing element selected from the group cerium, lanthanum, praseodymium and neodymium sufficient to increase ductility of the metallic glass upon annealing.

Thesis Abstract Fermented milk elaborated with Camellia sinensis.

PubMed

Ribeiro, O A S; Silva, M I A; Boari, C A

2016-05-13

This study aimed to develop and to characterize fermented dairy beverage formulated with Camellia sinensis. The infusion was elaborated with the addiction of dehydrated leaves of C. sinensis in whey (1g/100g) which added in sweetened milk (10% sucrose w/w) coagulated by Streptococcus salivarius subspecies thermophilus and Lactobacillus delbrueckii subspecies bulgaricus in proportions of 10, 20, 30 and 40% (v/w). The control treatment consisted of yogurt added with sucrose (10% w/w). Analysis were performed to quantify dry mass, moisture, ash, protein, fat, sodium, acidity, total quantification of lactic acid bacteria, total antioxidant activity and viscosity at the initial time of production and at 15 and 30 days of storage. Chromatographic determination of volatile compounds and sensory tests of acceptance and consumption intention were conducted at the initial time of production. Dry matter content, moisture, ash and total count of lactic acid bacteria from fermented milk drink formulations were not significantly affected by the amount of infusion of C. sinensis. However, the content of protein, fat and sodium were significantly lower with the increase of the proportion of infusion incorporated into the product. Significant reduction in apparent viscosity occurs with the increase in the amount of infusion added. The total antioxidant activity of the formulations was significantly higher as higher were the amount of added infusion. The addition of infusion contributed to the diversification of volatile aroma and taste makers in the product. The formulation of fermented dairy drink with addition of 30% infusion C. sinensis was better evaluated in sensory tests, with greater acceptance and greater consumer intent of consumption.

Coking and gasification process

DOEpatents

Billimoria, Rustom M.; Tao, Frank F.

1986-01-01

An improved coking process for normally solid carbonaceous materials wherein the yield of liquid product from the coker is increased by adding ammonia or an ammonia precursor to the coker. The invention is particularly useful in a process wherein coal liquefaction bottoms are coked to produce both a liquid and a gaseous product. Broadly, ammonia or an ammonia precursor is added to the coker ranging from about 1 to about 60 weight percent based on normally solid carbonaceous material and is preferably added in an amount from about 2 to about 15 weight percent.

Increase in ozone due to the use of biodiesel fuel rather than diesel fuel.

PubMed

Thang, Phan Quang; Muto, Yusuke; Maeda, Yasuaki; Trung, Nguyen Quang; Itano, Yasuyuki; Takenaka, Norimichi

2016-09-01

The consumption of fuel by vehicles emits nitrogen oxides (NOx) and non-methane hydrocarbons (NMHCs) into the atmosphere, which are important ozone precursors. Ozone is formed as a secondary pollutant via photochemical processes and is not emitted directly into the atmosphere. In this paper, the ozone increase resulting from the use of biodiesel and diesel fuels was investigated, and the different ozone formation trends were experimentally evaluated. Known amounts of exhaust gas from a power generator operated using biodiesel and diesel fuels were added to ambient air. The quality of the ambient air, such as the initial NMHC and NOx concentrations, and the irradiation intensity have an effect on the ozone levels. When 30 cm(3) of biodiesel fuel exhaust gas (BFEG) or diesel fuel exhausted gas (DFEG) was added to 18 dm(3) of ambient air, the highest ratios of ozone increase from BFEG compared with DFEG in Japan and Vietnam were 31.2 and 42.8%, respectively, and the maximum ozone increases resulting from DFEG and BFEG compared with the ambient air in Japan were 17.4 and 26.4 ppb, respectively. The ozone increase resulting from the use of BFEG was large and significant compared to that from DFEG under all experimental conditions. The ozone concentration increased as the amount of added exhaust gas increased. The ozone increase from the Jatropha-BFEG was slightly higher than that from waste cooking oil-BFEG. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effect of charcoal amendment on adsorption, leaching and degradation of isoproturon in soils.

PubMed

Si, Youbin; Wang, Midao; Tian, Chao; Zhou, Jing; Zhou, Dongmei

2011-04-01

The effects of charcoal amendment on adsorption, leaching and degradation of the herbicide isoproturon in soils were studied under laboratory conditions. The adsorption data all fitted well with the Freundlich empirical equation. It was found that the adsorption of isoproturon in soils increased with the rate of charcoal amended (correlation coefficient r=0.957**, P<0.01). The amount of isoproturon in leachate decreased with the increase of the amount of charcoal addition to soil column, while the retention of isoproturon in soils increased with an increase in the charcoal content of soil samples. Biodegradation was still the most significant mechanism for isoproturon dissipation from soil. Charcoal amendment greatly reduced the biodegradation of isoproturon in soils. The half-lives of isoproturon degradation (DT(50)) in soils greatly extended when the rate of added charcoal increased from 0 to 50 g kg(-1) (for Paddy soil, DT(50) values increased from 54.6 to 71.4 days; for Alfisol, DT(50) from 16.0 to 136 days; and for Vertisol, DT(50) from 15.2 to 107 days). The degradation rate of isoproturon in soils was significantly negatively correlated with the amount of added charcoal. This research suggests that charcoal amendment may be an effective management practice for reducing pesticide leaching and enhancing its persistence in soils. Copyright © 2010 Elsevier B.V. All rights reserved.

Lipoperoxidation is selectively involved in progressive supranuclear palsy.

PubMed

Odetti, P; Garibaldi, S; Norese, R; Angelini, G; Marinelli, L; Valentini, S; Menini, S; Traverso, N; Zaccheo, D; Siedlak, S; Perry, G; Smith, M A; Tabaton, M

2000-05-01

Progressive supranuclear palsy (PSP) is a neurodegenerative disorder characterized by extensive neurofibrillary tangle (NFT) formation and neuronal loss in selective neuronal populations. Currently, no clues to the biological events underlying the pathological process have emerged. In Alzheimer disease (AD), which shares with PSP the occurrence of NFTs, advanced glycation end products (AGEs) as well as oxidation adducts have been found to be increased in association with neurofibrillary pathology. The presence and the amount of lipid and protein oxidation markers, as well as of pyrraline and pentosidine. 2 major AGEs, was assessed by biochemical, immunochemical, and immunocytochemical analysis in midbrain tissue from 5 PSP cases, 6 sporadic AD cases, and 6 age-matched control cases. The levels of 4-hydroxynonenal (HNE) and thiobarbituric acid reactive substances (TBARS), 2 major products of lipid peroxidation, were significantly increased by 1.6-fold (p < 0.04) and 3.9-fold (p < 0.01), respectively, in PSP compared with control tissues, whereas in AD only TBARS were significantly increased. In PSP tissue the intensity of neuronal HNE immunoreactivity was proportional to the extent of abnormal aggregated tau protein. The amount of protein oxidation products and AGEs was instead similar in PSP and control tissues. In AD, a higher but not significant level of pyrraline and pentosidine was measured, whereas the level of carbonyl groups was doubled. These findings indicate that in PSP, unlike in AD, lipid peroxidation is selectively associated with NFT formation. The intraneuronal accumulation of toxic aldehydes may contribute to hamper tau degradation, leading to its aggregation in the PSP specific abnormal filaments.

Composite Electrolytes for Lithium Batteries: Ionic Liquids in APTES Crosslinked Polymers

NASA Technical Reports Server (NTRS)

Tigelaar, Dean M.; Meador, Mary Ann B.; Bennett, William R.

2007-01-01

Solvent free polymer electrolytes were made consisting of Li(+) and pyrrolidinium salts of trifluoromethanesulfonimide added to a series of hyperbranched poly(ethylene oxide)s (PEO). The polymers were connected by triazine linkages and crosslinked by a sol-gel process to provide mechanical strength. The connecting PEO groups were varied to help understand the effects of polymer structure on electrolyte conductivity in the presence of ionic liquids. Polymers were also made that contain poly(dimethylsiloxane) groups, which provide increased flexibility without interacting with lithium ions. When large amounts of ionic liquid are added, there is little dependence of conductivity on the polymer structure. However, when smaller amounts of ionic liquid are added, the inherent conductivity of the polymer becomes a factor. These electrolytes are more conductive than those made with high molecular weight PEO imbibed with ionic liquids at ambient temperatures, due to the amorphous nature of the polymer.

20 CFR 404.275 - How is an automatic cost-of-living increase calculated?

Code of Federal Regulations, 2010 CFR

2010-04-01

... calculated? 404.275 Section 404.275 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts Cost-Of-Living Increases... compute the average of the CPI for the quarters that begin and end the measuring period by adding the...

26 CFR 1.1059A-1 - Limitation on taxpayer's basis or inventory cost in property imported from related persons.

Code of Federal Regulations, 2010 CFR

2010-04-01

... denominator of which is the customs value of the item and adding this amount to the customs value of the... the denominator of which is the customs value of the item and adding this amount to the customs value... customs value of the item and adding this amount to the customs value of the dutiable portion of the item...

26 CFR 1.1059A-1 - Limitation on taxpayer's basis or inventory cost in property imported from related persons.

Code of Federal Regulations, 2013 CFR

2013-04-01

... denominator of which is the customs value of the item and adding this amount to the customs value of the... the denominator of which is the customs value of the item and adding this amount to the customs value... customs value of the item and adding this amount to the customs value of the dutiable portion of the item...

26 CFR 1.1059A-1 - Limitation on taxpayer's basis or inventory cost in property imported from related persons.

Code of Federal Regulations, 2012 CFR

2012-04-01

... denominator of which is the customs value of the item and adding this amount to the customs value of the... the denominator of which is the customs value of the item and adding this amount to the customs value... customs value of the item and adding this amount to the customs value of the dutiable portion of the item...

26 CFR 1.1059A-1 - Limitation on taxpayer's basis or inventory cost in property imported from related persons.

Code of Federal Regulations, 2014 CFR

2014-04-01

... denominator of which is the customs value of the item and adding this amount to the customs value of the... the denominator of which is the customs value of the item and adding this amount to the customs value... customs value of the item and adding this amount to the customs value of the dutiable portion of the item...

26 CFR 1.1059A-1 - Limitation on taxpayer's basis or inventory cost in property imported from related persons.

Code of Federal Regulations, 2011 CFR

2011-04-01

... denominator of which is the customs value of the item and adding this amount to the customs value of the... the denominator of which is the customs value of the item and adding this amount to the customs value... customs value of the item and adding this amount to the customs value of the dutiable portion of the item...

[Promotion effects of microorganisms on phytoremediation of heavy metals-contaminated soil].

PubMed

Yang, Zhuo; Wang, Zhan-Li; Li, Bo-Wen; Zhang, Rui-Fang

2009-08-01

Taking Brassica juncea as a hyperaccumulator, a pot experiment was conducted to study the effects of Bacillusme gaterium - Bacillus mucilaginosus mixed agent and Aspergillus niger 30177 fermentation liquor on the phytoremediation of Cd, Pb, and Zn-contaminated soil. The B. gaterium - B. mucilaginosus mixed agent not only promoted the growth of B. juncea, but also increased the soil Cd, Pb, and Zn uptake by the hyperaccumulator, with the phytoremediation efficiency enhanced greatly. The enrichment amount of Cd, Pb and Zn in B. juncea on the soil added with soluble Cd, Pb and Zn increased by 1.18, 1.54 and 0.85 folds, while that on the soil added with Cd, Pb and Zn-contaminated sediment increased by 4.00, 0. 64 and 0. 65 folds, respectively, compared with the control. A. niger 30177 fermentation liquor increased the soil Cd, Pb, and Zn uptake by B. juncea. Comparing with the control, the enrichment amount of Cd, Pb and Zn in aboveground part of B. juncea on the soil added with soluble Cd, Pb and Zn increased by 88.82%, 129.04% and 16.80%, while that on the soil added with Cd, Pb and Zn-contaminated sediment increased by 78.95%, 113.63% and 33.85%, respectively. However, A. niger 30177 fermentation liquor decreased the B. juncea biomass greatly, having less effect in the enhancement of phytoremediation efficiency. The analysis of reversed-phase high performance liquid chromatography showed that the fermentation liquor of B. gaterium and B. mucilaginosus contained some organic acids such as oxalic acid and citric acid. These acids could dissolve the heavy metals to some degree, and accordingly, enhance the bioavailability of the metals.

Development of the SoFAS (solid fats and added sugars) concept: the 2010 Dietary Guidelines for Americans.

PubMed

Nicklas, Theresa A; O'Neil, Carol E

2015-05-01

The diets of most US children and adults are poor, as reflected by low diet quality scores, when compared with the recommendations of the Dietary Guidelines for Americans (DGAs). Contributing to these low scores is that most Americans overconsume solid fats, which may contain saturated fatty acids and added sugars; although alcohol consumption was generally modest, it provided few nutrients. Thus, the 2005 DGAs generated a new recommendation: to reduce intakes of solid fats, alcohol, and added sugars (SoFAAS). What precipitated the emergence of the new SoFAAS terminology was the concept of discretionary calories (a "calorie" is defined as the amount of energy needed to increase the temperature of 1 kg of water by 1°C), which were defined as calories consumed after an individual had met his or her recommended nutrient intakes while consuming fewer calories than the daily recommendation. A limitation with this concept was that additional amounts of nutrient-dense foods consumed beyond the recommended amount were also considered discretionary calories. The rationale for this was that if nutrient-dense foods were consumed beyond recommended amounts, after total energy intake was met then this constituted excess energy intake. In the 2010 DGAs, the terminology was changed to solid fats and added sugars (SoFAS); thus, alcohol was excluded because it made a minor contribution to overall intake and did not apply to children. The SoFAS terminology also negated nutrient-dense foods that were consumed in amounts above the recommendations for the specific food groups in the food patterns. The ambiguous SoFAS terminology was later changed to "empty calories" to reflect only those calories from solid fats and added sugars (and alcohol if consumed beyond moderate amounts). The purpose of this review is to provide an historical perspective on how the dietary recommendations went from SoFAAS to SoFAS and how discretionary calories went to empty calories between the 2005 and 2010 DGAs. This information will provide practitioners, as well as the public, with valuable information to better understand the evolution of SoFAS over time. © 2015 American Society for Nutrition.

Development of the SoFAS (Solid Fats and Added Sugars) Concept: The 2010 Dietary Guidelines for Americans123

PubMed Central

Nicklas, Theresa A; O’Neil, Carol E

2015-01-01

The diets of most US children and adults are poor, as reflected by low diet quality scores, when compared with the recommendations of the Dietary Guidelines for Americans (DGAs). Contributing to these low scores is that most Americans overconsume solid fats, which may contain saturated fatty acids and added sugars; although alcohol consumption was generally modest, it provided few nutrients. Thus, the 2005 DGAs generated a new recommendation: to reduce intakes of solid fats, alcohol, and added sugars (SoFAAS). What precipitated the emergence of the new SoFAAS terminology was the concept of discretionary calories (a “calorie” is defined as the amount of energy needed to increase the temperature of 1 kg of water by 1°C), which were defined as calories consumed after an individual had met his or her recommended nutrient intakes while consuming fewer calories than the daily recommendation. A limitation with this concept was that additional amounts of nutrient-dense foods consumed beyond the recommended amount were also considered discretionary calories. The rationale for this was that if nutrient-dense foods were consumed beyond recommended amounts, after total energy intake was met then this constituted excess energy intake. In the 2010 DGAs, the terminology was changed to solid fats and added sugars (SoFAS); thus, alcohol was excluded because it made a minor contribution to overall intake and did not apply to children. The SoFAS terminology also negated nutrient-dense foods that were consumed in amounts above the recommendations for the specific food groups in the food patterns. The ambiguous SoFAS terminology was later changed to “empty calories” to reflect only those calories from solid fats and added sugars (and alcohol if consumed beyond moderate amounts). The purpose of this review is to provide an historical perspective on how the dietary recommendations went from SoFAAS to SoFAS and how discretionary calories went to empty calories between the 2005 and 2010 DGAs. This information will provide practitioners, as well as the public, with valuable information to better understand the evolution of SoFAS over time. PMID:25979510

Effect of macronutrients and fiber on postprandial glycemic responses and meal glycemic index and glycemic load value determinations.

PubMed

Meng, Huicui; Matthan, Nirupa R; Ausman, Lynne M; Lichtenstein, Alice H

2017-04-01

Background: The potential confounding effect of different amounts and proportions of macronutrients across eating patterns on meal or dietary glycemic index (GI) and glycemic load (GL) value determinations has remained partially unaddressed. Objective: The study aimed to determine the effects of different amounts of macronutrients and fiber on measured meal GI and GL values. Design: Four studies were conducted during which participants [ n = 20-22; women: 50%; age: 50-80 y; body mass index (in kg/m 2 ): 25-30)] received food challenges containing different amounts of the variable nutrient in a random order. Added to the standard 50 g available carbohydrate from white bread was 12.5, 25, or 50 g carbohydrate; 12.5, 25, or 50 g protein; and 5.6, 11.1, or 22.2 g fat from rice cereal, tuna, and unsalted butter, respectively, and 4.8 or 9.6 g fiber from oat cereal. Arterialized venous blood was sampled for 2 h, and measured meal GI and GL and insulin index (II) values were calculated by using the incremental area under the curve (AUC i ) method. Results: Adding carbohydrate to the standard white-bread challenge increased glucose AUC i ( P < 0.0001), measured meal GI ( P = 0.0066), and mean GL ( P < 0.0001). Adding protein (50 g only) decreased glucose AUC i ( P = 0.0026), measured meal GI ( P = 0.0139), and meal GL ( P = 0.0140). Adding fat or fiber had no significant effect on these variables. Adding carbohydrate (50 g), protein (50 g), and fat (11.1 g) increased the insulin AUC i or II; fiber had no effect. Conclusions: These data indicate that uncertainty in the determination of meal GI and GL values is introduced when carbohydrate-containing foods are consumed concurrently with protein (equal amount of carbohydrate challenge) but not with carbohydrate-, fat-, or fiber-containing foods. Future studies are needed to evaluate whether this uncertainty also influences the prediction of average dietary GI and GL values for eating patterns. This trial was registered at clinicaltrials.gov as NCT01023646. © 2017 American Society for Nutrition.

Effect of macronutrients and fiber on postprandial glycemic responses and meal glycemic index and glycemic load value determinations123

PubMed Central

Meng, Huicui; Matthan, Nirupa R; Ausman, Lynne M; Lichtenstein, Alice H

2017-01-01

Background: The potential confounding effect of different amounts and proportions of macronutrients across eating patterns on meal or dietary glycemic index (GI) and glycemic load (GL) value determinations has remained partially unaddressed. Objective: The study aimed to determine the effects of different amounts of macronutrients and fiber on measured meal GI and GL values. Design: Four studies were conducted during which participants [n = 20–22; women: 50%; age: 50–80 y; body mass index (in kg/m2): 25–30)] received food challenges containing different amounts of the variable nutrient in a random order. Added to the standard 50 g available carbohydrate from white bread was 12.5, 25, or 50 g carbohydrate; 12.5, 25, or 50 g protein; and 5.6, 11.1, or 22.2 g fat from rice cereal, tuna, and unsalted butter, respectively, and 4.8 or 9.6 g fiber from oat cereal. Arterialized venous blood was sampled for 2 h, and measured meal GI and GL and insulin index (II) values were calculated by using the incremental area under the curve (AUCi) method. Results: Adding carbohydrate to the standard white-bread challenge increased glucose AUCi (P < 0.0001), measured meal GI (P = 0.0066), and mean GL (P < 0.0001). Adding protein (50 g only) decreased glucose AUCi (P = 0.0026), measured meal GI (P = 0.0139), and meal GL (P = 0.0140). Adding fat or fiber had no significant effect on these variables. Adding carbohydrate (50 g), protein (50 g), and fat (11.1 g) increased the insulin AUCi or II; fiber had no effect. Conclusions: These data indicate that uncertainty in the determination of meal GI and GL values is introduced when carbohydrate-containing foods are consumed concurrently with protein (equal amount of carbohydrate challenge) but not with carbohydrate-, fat-, or fiber-containing foods. Future studies are needed to evaluate whether this uncertainty also influences the prediction of average dietary GI and GL values for eating patterns. This trial was registered at clinicaltrials.gov as NCT01023646. PMID:28202475

Beyond Fine Tuning: Adding capacity to leverage few labels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hodas, Nathan O.; Shaffer, Kyle J.; Yankov, Artem

2017-12-09

In this paper we present a technique to train neural network models on small amounts of data. Current methods for training neural networks on small amounts of rich data typically rely on strategies such as fine-tuning a pre-trained neural networks or the use of domain-specific hand-engineered features. Here we take the approach of treating network layers, or entire networks, as modules and combine pre-trained modules with untrained modules, to learn the shift in distributions between data sets. The central impact of using a modular approach comes from adding new representations to a network, as opposed to replacing representations via fine-tuning.more » Using this technique, we are able surpass results using standard fine-tuning transfer learning approaches, and we are also able to significantly increase performance over such approaches when using smaller amounts of data.« less

Metallic glass composition. [That does not embrittle upon annealing

DOEpatents

Kroeger, D.M.; Koch, C.C.

1984-09-14

This patent pertains to a metallic glass alloy that is either iron-based or nickel-based or based on a mixture of iron and nickel, containing lesser amounts of elements selected from the group boron, silicon, carbon and phosphorous to which is added an amount of a ductility-enhancing element selected from the group cerium, lanthanum, praseodymium and neodymium sufficient to increase ductility of the metallic glass upon annealing.

[Molecular markers of Alzheimer disease early diagnostic: investigation perspectives of peripheral tissues.

PubMed

Paltsev, M A; Zuev, V A; Kozhevnikova, E O; Linkova, N S; Kvetnaia, T V; Polyakova, V O; Kvetnoy, I M

2017-01-01

Alzheimer's disease (AD) is a progressive neurodegenerative disorder of elderly and old age people. For intravital diagnosis of the expression of signaling molecules - AD markers, cerebrospinal fluid (CSF) and peripheral tissues are used: lymphocytes and blood platelets, buccal and olfactory epithelium, skin fibroblasts. There are several changes in the production of hyper phosphorylated form of τ-protein, BACE1 and peptide Аβ42 in CSF in case of AD, but CSF taking may have a number of side effects. Less traumatic taking of sampling tissues for the diagnosis of AD is in use of epithelium biopsy and blood portion. An increase in the expression of the hyper phosphorylated form of τ-protein is shown in blood lymphocytes of AD patients. An increase in the content of high molecular weight forms of phosphorylated t-protein and amyloid precursor protein-APP was also revealed in blood platelets of AD patients. Changes in the amount of 2 miRNA families - miR-132 family and miR-134 family were revealed in blood cells 1-5 years before the manifestation of clinical signs of AD. An increase in the concentration of bound calcium, synthesis of peptides Aβ40 and Aβ42, τ protein was observed in AD skin fibroblasts. In the olfactory and buccal epithelium an increase in the expression of hyper phosphorylated form of τ-protein and Aβ peptide was detected in patients with AD. Verification of AD markers in peripheral tissues for biopsy have the important significant for life diagnostics, prevention and and target AD treatment.

Evaluating and modeling the effects of surface sampling factors on the recovery of organic chemical attribution signatures using the accelerated diffusion sampler and solvent extraction.

PubMed

Mo, Kai-For; Heredia-Langner, Alejandro; Fraga, Carlos G

2017-03-01

In this study, an experimental design matrix was created and executed to test the effects of various real-world factors on the ability of (1) the accelerated diffusion sampler with solid phase micro-extraction (ADS-SPME) and (2) solvent extraction to capture organic chemical attribution signatures (CAS) from dimethyl methylphosphonate (DMMP) spiked onto painted wall board (PWB) surfaces. The DMMP CAS organic impurities sampled by ADS-SPME and solvent extraction were analyzed by gas chromatography/mass spectrometry (GC/MS). The number of detected DMMP CAS impurities and their respective GC/MS peak areas were determined as a function of DMMP stock, DMMP spiked volume, exposure time, SPME sampling time, and ADS headspace pressure. Based on the statistical analysis of experimental results, several general conclusions are made: (1) the amount of CAS impurity detected using ADS-SPME and GC/MS was most influenced by spiked volume, stock, and ADS headspace pressure, (2) reduced ADS headspace pressure increased the amount of detected CAS impurity, as measured by GC/MS peak area, by up to a factor of 1.7-1.9 compared to ADS at ambient headspace pressure, (3) the ADS had no measurable effect on the number of detected DMMP impurities, that is, ADS (with and without reduced pressure) had no practical effect on the DMMP impurity profile collected from spiked PWB, and (4) solvent extraction out performed ADS-SPME in terms of consistently capturing all or most of the targeted DMMP impurities from spiked PWB. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of exposing rats to 100% oxygen at 450 and 600 mm Hg on in vitro liver and adipose tissue lipid synthesis.

NASA Technical Reports Server (NTRS)

Feller, D. D.; Neville, E. D.; Talarico, K. S.

1972-01-01

Male rats (260-285 gm) were exposed to 100% oxygen at 450 or 600 mm Hg for 1 to 4 days. Rats maintained at 450 mm Hg ate 92% the amount of food eaten by ad libitum controls maintained at sea level conditions. At 600 mm Hg, the food intake was 77% of the ad libitum controls. No difference was found in the plasma level of glucose, free fatty acids, and corticosterone between oxygen exposed rats and their respective pair-fed controls. The in vitro conversion of acetate into fatty acids by adipose tissue from rats exposed at 450 mm Hg for 2, 3, or 4 days was significantly increased above pair-fed controls and ad libitum controls. Increasing the oxygen pressure to 600 mm Hg abolished this increase, and in fact, reversed the increased synthesis to a significant decrease for the 4-day exposure.

Effect of calcium oxide on the efficiency of ferrous ion oxidation and total iron precipitation during ferrous ion oxidation in simulated acid mine drainage treatment with inoculation of Acidithiobacillus ferrooxidans.

PubMed

Liu, Fenwu; Zhou, Jun; Jin, Tongjun; Zhang, Shasha; Liu, Lanlan

2016-01-01

Calcium oxide was added into ferrous ion oxidation system in the presence of Acidithiobacillus ferrooxidans at concentrations of 0-4.00 g/L. The pH, ferrous ion oxidation efficiency, total iron precipitation efficiency, and phase of the solid minerals harvested from different treatments were investigated during the ferrous ion oxidation process. In control check (CK) system, pH of the solution decreased from 2.81 to 2.25 when ferrous ions achieved complete oxidation after 72 h of Acidithiobacillus ferrooxidans incubation without the addition of calcium oxide, and total iron precipitation efficiency reached 20.2%. Efficiency of ferrous ion oxidation and total iron precipitation was significantly improved when the amount of calcium oxide added was ≤1.33 g/L, and the minerals harvested from systems were mainly a mixture of jarosite and schwertmannite. For example, the ferrous ion oxidation efficiency reached 100% at 60 h and total iron precipitation efficiency was increased to 32.1% at 72 h when 1.33 g/L of calcium oxide was added. However, ferrous ion oxidation and total iron precipitation for jarosite and schwertmannite formation were inhibited if the amount of calcium oxide added was above 2.67 g/L, and large amounts of calcium sulfate dihydrate were generated in systems.

Improving the desulfurization performance of CaCO3 with sodium humate

NASA Astrophysics Data System (ADS)

Feng, Run; Sun, Zhiguo; Zhang, Wenqing; Huang, Hao; Hu, Haihang; Zhang, Li; Xie, Hongyong

2018-02-01

The influence of these factors on desulphurization efficiency was studied by changing the amount of calcium carbonate, the concentration of sulfur dioxide, the liquid flow rate of absorbent and the air flow rate, the optimum working condition was determined by the research of limestone-gypsum desulphurization process commonly used in industry. By changing the amount of calcium carbonate, we conclude that the volume of water in the desulfurization efficiency does not increase with the adding amount of calcium carbonate. The optimum conditions were determined : at the condicion of the concentration of 500ppm of sulfur dioxide, 10g calcium carbonate, 150L/h liquid flow and the minimum air flow rate of 6.75m3/h, the highest desulfurization efficiency was close to 100% when sodium humate was not added, but the holding time was only about 5 minutes. After adding 3g of humic acid, the desulfurization efficiency was improved obviously, and the instantaneous efficiency of 100% lasting for about 40 minutes. It can be seen that, calcium carbonate in the addition of humic acid sodium can significantly improve the absorption of calcium carbonate performance of SO2.

A Novel Vaccine Approach for Chagas Disease Using Rare Adenovirus Serotype 48 Vectors

PubMed Central

Farrow, Anitra L.; Peng, Binghao J.; Gu, Linlin; Krendelchtchikov, Alexandre; Matthews, Qiana L.

2016-01-01

Due to the increasing amount of people afflicted worldwide with Chagas disease and an increasing prevalence in the United States, there is a greater need to develop a safe and effective vaccine for this neglected disease. Adenovirus serotype 5 (Ad5) is the most common adenovirus vector used for gene therapy and vaccine approaches, but its efficacy is limited by preexisting vector immunity in humans resulting from natural infections. Therefore, we have employed rare serotype adenovirus 48 (Ad48) as an alternative choice for adenovirus/Chagas vaccine therapy. In this study, we modified Ad5 and Ad48 vectors to contain T. cruzi’s amastigote surface protein 2 (ASP-2) in the adenoviral early gene. We also modified Ad5 and Ad48 vectors to utilize the “Antigen Capsid-Incorporation” strategy by adding T. cruzi epitopes to protein IX (pIX). Mice that were immunized with the modified vectors were able to elicit T. cruzi-specific humoral and cellular responses. This study indicates that Ad48-modified vectors function comparable to or even premium to Ad5-modified vectors. This study provides novel data demonstrating that Ad48 can be used as a potential adenovirus vaccine vector against Chagas disease. PMID:26978385

Effect of Fe2O3 on the crystallization behavior of glass-ceramics produced from naturally cooled yellow phosphorus furnace slag

NASA Astrophysics Data System (ADS)

Liu, Hong-pan; Huang, Xiao-feng; Ma, Li-ping; Chen, Dan-li; Shang, Zhi-biao; Jiang, Ming

2017-03-01

CaO-Al2O3-SiO2 (CAS) glass-ceramics were prepared via a melting method using naturally cooled yellow phosphorus furnace slag as the main raw material. The effects of the addition of Fe2O3 on the crystallization behavior and properties of the prepared glass-ceramics were studied by differential thermal analysis, X-ray diffraction, and scanning electron microscopy. The crystallization activation energy was calculated using the modified Johnson-Mehl-Avrami equation. The results show that the intrinsic nucleating agent in the yellow phosphorus furnace slag could effectively promote the crystallization of CAS. The crystallization activation energy first increased and then decreased with increasing amount of added Fe2O3. At 4wt% of added Fe2O3, the crystallization activation energy reached a maximum of 676.374 kJ·mol-1. The type of the main crystalline phase did not change with the amount of added Fe2O3. The primary and secondary crystalline phases were identified as wollastonite (CaSiO3) and hedenbergite (CaFe(Si2O6)), respectively.

Query-Structure Based Web Page Indexing

DTIC Science & Technology

2012-11-01

the massive amount of data present on the web. In our third participation in the web track at TREC 2012, we explore the idea of building an...the ad-hoc and diversity task. 1 INTRODUCTION The rapid growth and massive quantities of data on the Internet have increased the importance and...complexity of information retrieval systems. The amount and the diversity of the web data introduce shortcomings in the way search engines rank their

Effect of degree of esterification of pectin and calcium amount on drug release from pectin-based matrix tablets.

PubMed

Sungthongjeen, Srisagul; Sriamornsak, Pornsak; Pitaksuteepong, Tasana; Somsiri, Atawit; Puttipipatkhachorn, Satit

2004-02-12

The aim of this work was to assess the effect of 2 formulation variables, the pectin type (with different degrees of esterification [DEs]) and the amount of calcium, on drug release from pectin-based matrix tablets. Pectin matrix tablets were prepared by blending indomethacin (a model drug), pectin powder, and various amounts of calcium acetate and then tableting by automatic hydraulic press machine. Differential scanning calorimetry, powder x-ray diffraction, and Fourier transformed-infrared spectroscopy studies of the compressed tablets revealed no drug-polymer interaction and the existence of drug with low crystallinity. The in-vitro release studies in phosphate buffer (United States Pharmacopeia) and tris buffer indicated that the lower the DE, the greater the time for 50% of drug release (T50). This finding is probably because of the increased binding capacity of pectin to calcium. However, when the calcium was excluded, the pectins with different DEs showed similar release pattern with insignificant difference of T50. When the amount of calcium acetate was increased from 0 to 12 mg/tablet, the drug release was significantly slower. However, a large amount of added calcium (ie, 24 mg/tablet) produced greater drug release because of the partial disintegration of tablets. The results were more pronounced in phosphate buffer, where the phosphate ions induced the precipitation of calcium phosphate. In conclusion, both pectin type and added calcium affect the drug release from the pectin-based matrix tablets.

Characterization of Mg-containing hydroxyapatites synthesized by combustion method

NASA Astrophysics Data System (ADS)

Kaygili, Omer; Keser, Serhat; Bulut, Niyazi; Ates, Tankut

2018-05-01

In the present paper, Mg-substituted hydroxyapatites with the morphology, composed of the stacked plate- and rod-like structures, were prepared at the temperature of 600 °C by combustion method using glycerine as a fuel. A significant decrease in the crystallite size values calculated for both Scherrer and Williamson-Hall methods is found. The crystallinity, lattice parameter of a, stress and anisotropic energy density values decreased by adding of Mg, whereas the lattice strain increased. The amount of HAp phase decreases with increasing amount of Mg and the β-tricalcium phosphate content increases. Mg incorporation the apatitic structure was detected. Depending on the increase in Mg content, Ca-deficiency was observed.

Association of Short-Term Exposure to Ambient Fine Particulate Matter with Skin Symptoms in Schoolchildren: A Panel Study in a Rural Area of Western Japan.

PubMed

Watanabe, Masanari; Noma, Hisashi; Kurai, Jun; Sano, Hiroyuki; Iwata, Kyoko; Hantan, Degejirihu; Tohda, Yuji; Shimizu, Eiji

2017-03-13

Numerous studies have unmasked the deleterious effects of particulate matter less than 2.5 μm (PM 2.5 ) on health. However, epidemiologic evidence focusing on the effects of PM 2.5 on skin health remains limited. An important aspect of Asian dust (AD) in relationship to health is the amount of PM 2.5 contained therein. Several studies have demonstrated that AD can aggravate skin symptoms. The current study aimed to investigate the effects of short-term exposure to PM 2.5 and AD particles on skin symptoms in schoolchildren. A total of 339 children recorded daily skin symptom scores during February 2015. Light detection and ranging were used to calculate AD particle size. Generalized estimating equation logistic regression analyses were used to estimate the associations among skin symptoms and the daily levels of PM 2.5 and AD particles. Increases in the levels of PM 2.5 and AD particles were not related to an increased risk of skin symptom events, with increases of 10.1 μg/m³ in PM 2.5 and 0.01 km -1 in AD particles changing odds ratios by 1.03 and 0.99, respectively. These results suggest that short-term exposure to PM 2.5 and AD does not impact skin symptoms in schoolchildren.

Southern pulpwood production, 1976

Treesearch

Daniel F. Bertelson

1977-01-01

Total southern pulpwood production in 1976 amounted to 47.4 million cords (table 1). This is an increase of 5 million cords or 12 percent more than the previous year and less than 2 million cords below the 1974 record output. Softwood residues accounted for 52 percent of the increase, and hardwood roundwood added another 22 percent to the total gain.

Impact of monovalent cations on soil structure. Part II. Results of two Swiss soils

NASA Astrophysics Data System (ADS)

Farahani, Elham; Emami, Hojat; Keller, Thomas

2018-01-01

In this study, we investigated the impact of adding solutions with different potassium and sodium concentrations on dispersible clay, water retention characteristics, air permeability, and soil shrinkage behaviour using two agricultural soils from Switzerland with different clay content but similar organic carbon to clay ratio. Three different solutions (including only Na, only K, and the combination of both) were added to soil samples at three different cation ratio of soil structural stability levels, and the soil samples were incubated for one month. Our findings showed that the amount of readily dispersible clay increased with increasing Na concentrations and with increasing cation ratio of soil structural stability. The treatment with the maximum Na concentration resulted in the highest water retention and in the lowest shrinkage capacity. This was was associated with high amounts of readily dispersible clay. Air permeability generally increased during incubation due to moderate wetting and drying cycles, but the increase was negatively correlated with readily dispersible clay. Readily dispersible clay decreased with increasing K, while readily dispersible clay increased with increasing K in Iranian soil (Part I of our study). This can be attributed to the different clay mineralogy of the studied soils (muscovite in Part I and illite in Part II).

Calcium Chloride in Neonatal Parenteral Nutrition Solutions with and without Added Cysteine: Compatibility Studies Using Laser and Micro-Flow Imaging Methodology.

PubMed

Huston, Robert K; Christensen, J Mark; Alshahrani, Sultan M; Mohamed, Sumeia M; Clark, Sara M; Nason, Jeffrey A; Wu, Ying Xing

2015-01-01

Previous studies of compatibility of calcium chloride (CaCl2) and phosphates have not included particle counts in the range specified by the United States Pharmacopeia. Micro-flow imaging techniques have been shown to be comparable to light obscuration when determining particle count and size in pharmaceutical solutions. The purpose of this study was to do compatibility testing for parenteral nutrition (PN) solutions containing CaCl2 using dynamic light scattering and micro-flow imaging techniques. Solutions containing TrophAmine (Braun Medical Inc, Irvine, CA), CaCl2, and sodium phosphate (NaPhos) were compounded with and without cysteine. All solutions contained standard additives to neonatal PN solutions including dextrose, trace metals, and electrolytes. Control solutions contained no calcium or phosphate. Solutions were analyzed for particle size and particle count. Means of Z-average particle size and particle counts of controls were determined. Study solutions were compared to controls and United States Pharmacopeia (USP) Chapter 788 guidelines. The maximum amount of Phos that was compatible in solutions that contained at least 10 mmol/L of Ca in 2.5% amino acids (AA) was determined. Compatibility of these solutions was verified by performing analyses of 5 repeats of these solutions. Microscopic analyses of the repeats were also performed. Amounts of CaCl2 and NaPhos that were compatible in solutions containing 1.5%, 2%, 2.5%, and 3% AA were determined. The maximum amount of NaPhos that could be added to TrophAmine solutions of > = 2.5% AA containing at least 10 mmol/L of CaCl2 was 7.5 mmol/L. Adding 50 mg/dL of cysteine increased the amount of NaPhos that could be added to solutions containing 10 mmol/L of CaCl2 to 10 mmol/L. Calcium chloride can be added to neonatal PN solutions containing NaPhos in concentrations that can potentially provide an intravenous intake of adequate amounts of calcium and phosphorus.

Bilingualism as a contributor to cognitive reserve: evidence from brain atrophy in Alzheimer's disease.

PubMed

Schweizer, Tom A; Ware, Jenna; Fischer, Corinne E; Craik, Fergus I M; Bialystok, Ellen

2012-09-01

Much of the research on delaying the onset of symptoms of Alzheimer's disease (AD) has focused on pharmacotherapy, but environmental factors have also been acknowledged to play a significant role. Bilingualism may be one factor contributing to 'cognitive reserve' (CR) and therefore to a delay in symptom onset. If bilingualism is protective, then the brains of bilinguals should show greater atrophy in relevant areas, since their enhanced CR enables them to function at a higher level than would be predicted from their level of disease. We analyzed a number of linear measurements of brain atrophy from the computed tomography (CT) scans of monolingual and bilingual patients diagnosed with probable AD who were matched on level of cognitive performance and years of education. Bilingual patients with AD exhibited substantially greater amounts of brain atrophy than monolingual patients in areas traditionally used to distinguish AD patients from healthy controls, specifically, the radial width of the temporal horn and the temporal horn ratio. Other measures of brain atrophy were comparable for the two groups. Bilingualism appears to contribute to increased CR, thereby delaying the onset of AD and requiring the presence of greater amounts of neuropathology before the disease is manifest. Copyright © 2011 Elsevier Srl. All rights reserved.

Consumption of added sugar among U.S. children and adolescents, 2005-2008.

PubMed

Ervin, R Bethene; Kit, Brian K; Carroll, Margaret D; Ogden, Cynthia L

2012-03-01

Approximately 16% of children and adolescents’ total caloric intakes came from added sugars. Boys consumed more added sugars than girls. Preschool-aged children consumed the fewest calories from added sugars. Although girls consumed a smaller absolute amount of calories from added sugars than boys, their intakes were not that different from boys when the amounts are expressed as a percentage of total caloric intakes. Non-Hispanic white children and adolescents consumed a larger percentage of their calories from added sugars than Mexican-American children and adolescents. Also, Non-Hispanic black girls consumed a larger percentage of their calories from added sugars than Mexican-American girls. There was very little difference in added sugar consumption based on PIR. More of the added sugars calories came from foods as opposed to beverages. Previous research has demonstrated that sodas are the single leading food source of added sugars intakes among children, adolescents, and adults (2,4). Our results showed a little more than 40% of calories from added sugars came from beverages. Poti and Popkin (5) have suggested that eating location impacts daily energy intake in children and adolescents and that foods prepared away from home, are contributing to their increased total energy intake. Our results showed that more of the added sugars calories were consumed at home rather than away from home. A substantial percentage of calories in the diets of children and adolescents between 2005 and 2008 came from added sugars. According to the 2010 Dietary Guidelines "reducing the consumption of these sources of added sugars will lower the caloric content of the diet, without compromising its nutrient adequacy (3)." This strategy could play an important role in reducing the high prevalence of obesity in the United States (6) without compromising adequate nutrition. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source, however, is appreciated.

Research on Foam Concrete Features by Replacing Cement with Industrial Waste Residues

NASA Astrophysics Data System (ADS)

Saynbaatar; Qiqige; Ma, Gangping; Fu, Jianhua; Wang, Jinghua

The influence on the performance of foam concrete made by replacing cement with some industrial waste residues was researched in this paper. The result shows that the 7d and 28d compressive strength of foam concrete increases firstly and then decreases with the increasing amount of industrial waste residue. The proper added range is 10%-20% for steel slag, blast furnace slag and coal ash, but, 8% for desulfurized fly ash. With the proper adding ratio, the compressive strength of foam concrete always increased comparing with the pure cement foam concrete. When adding 48% of the compound industrial waste residues, the 28d compressive strength of the foam concrete reached the 2.9MPa which could match the pure cement foam concrete. The results indicates that there is a synergistic effect among the compound industrial waste residue, and this effect is benefit to improving the compressive strength of foam concrete.

Anaerobic digestion of food waste - Challenges and opportunities.

PubMed

Xu, Fuqing; Li, Yangyang; Ge, Xumeng; Yang, Liangcheng; Li, Yebo

2018-01-01

The disposal of large amounts of food waste has caused significant environmental pollution and financial costs globally. Compared with traditional disposal methods (i.e., landfilling, incineration, and composting), anaerobic digestion (AD) is a promising technology for food waste management, but has not yet been fully applied due to a few technical and social challenges. This paper summarizes the quantity, composition, and methane potential of various types of food waste. Recent research on different strategies to enhance AD of food waste, including co-digestion, addition of micronutrients, control of foaming, and process design, is discussed. It is envisaged that AD of food waste could be combined with an existing AD facility or be integrated with the production of value-added products to reduce costs and increase revenue. Further understanding of the fundamental biological and physicochemical processes in AD is required to improve the technology. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simultaneous effects of tocopheryl polyethylene glycol succinate (TPGS) on local hair growth promotion and systemic absorption of topically applied minoxidil in a mouse model.

PubMed

Chen, Chien-Ho; Sheu, Ming-Thau; Wu, An-Bang; Lin, Keng-Ping; Ho, Hsiu-O

2005-12-08

In this study, topical minoxidil solutions supplemented with TPGS in cosolvent systems of various compositions consisting of water, alcohol, and polyethylene glycol 400 were designed to evaluate the efficacy of promoting hair growth after topical application and the safety in terms of the amount of minoxidil absorbed through the skin into the circulation using C57BL/6J mice as a model. The commercial product of 2% Regaine) was used as the positive control. The role, which sulfotransferase activity plays in hair growth with treatment using minoxidil, was determined as well. The results revealed that the addition of 0.5% TPGS was able to enhance the proliferation of hair, but an increase in the amount of TPGS to 2% led to deterioration in the enhancement of hair growth. At the higher added amount (2.0%) of TPGS, the promotion of hair growth was slightly reduced for both cosolvent formulations F1 (100% water) and F3 (100% PEG 400), whereas it was reduced to a greater extent for the cosolvent formulations F8-F10. In comparison, the influences of cosolvent compositions with TPGS amounts of 0.0 and 2.0% on the promotion of hair growth were similar. On the contrary, variability in the promotion of hair growth by different solvent formulations was minimal when the added amount of TPGS was 0.5%. In general, a relationship between hair growth and sulfotransferase activities after topical application of 2% Regaine and minoxidil formulations containing various amounts of TPGS was not demonstrated. Plasma concentrations of minoxidil with 2% Regaine were found to be greater than those of 2% minoxidil in those cosolvent formulations containing various amounts of TPGS, while showing insignificant differences among those 10 cosolvent formulations with a fixed amount of TPGS. A tendency for the plasma concentration of minoxidil to increase after the topical administration of minoxidil formulations containing the higher amount of TPGS (2%) was noted.

Evaluating and modeling the effects of surface sampling factors on the recovery of organic chemical attribution signatures using the accelerated diffusion sampler and solvent extraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mo, Kai-For; Heredia-Langner, Alejandro; Fraga, Carlos G.

In this study, an experimental design matrix was created and executed in order to test the effects of various real-world factors on the ability of the (1) accelerated diffusion sampler with solid phase micro-extraction (ADS-SPME) and (2) solvent extraction to capture organic chemical attribution signatures (CAS) from dimethyl methylphosphonate (DMMP) spiked onto painted wall board (PWB) surfaces. The DMMP CAS organic impurities sampled by ADS-SPME and solvent extraction were analyzed by gas chromatography/mass spectrometry (GC/MS). The number of detected DMMP CAS impurities and their respective GC/MS peak areas were determined as a function of DMMP stock, DMMP spiked volume, exposuremore » time, SPME sampling time, and ADS headspace pressure. Based on the statistical analysis of experimental results, several general conclusions are made: (1) ADS-SPME with vacuum (i.e., reduced pressure) increased the amount of detected CAS impurity, as measured by GC/MS peak area, by a factor of 1.7 to 1.9 for PWB under certain experimental conditions, (2) the amount of detected CAS impurity was most influenced by spiked volume, stock, and ADS headspace pressure, (3) the ADS had no measurable effect on the number of detected DMMP impurities, that is, the ADS (with and without reduced pressure) had no practical effect on the DMMP impurity profile collected from spiked PWB, and (4) solvent extraction out performed ADS-SPME in terms of consistently capturing all or most of the targeted DMMP impurities from spiked PWB.« less

Long-term leaching behavior of phenol in cement/activated-carbon solidified/stabilized hazardous waste.

PubMed

Liu, Jianguo; Nie, Xiaoqin; Zeng, Xianwei; Su, Zhaoji

2013-01-30

The long-term leaching behavior of phenol in solidified/stabilized (S/S) hazardous wastes cured for 28 d with different amounts of activated carbon (AC) was investigated using synthetic inorganic acid (H(2)SO(4):HNO(3) = 2:1, pH = 3.2), acetic acid buffer (HAc/NaAc, pH = 4.93), and deionized water as leachants to simulate the leaching of phenol in three exposure scenarios: acid-precipitation, co-disposal, and neutral-precipitation. Phenol immobilization was enhanced by AC adsorption and impaired by the growth of micropores with increasing amount of AC; thus the optimal added amount of AC to be to added S/S wastes was 2%. The leaching behavior of phenol in co-disposal scenario was unpredictable due to inadequate ionization of HAc in the HAc-NaAc buffer solution. The findings indicated that S/S products should be disposed of in hazardous waste landfills rather than municipal solid waste landfills. Copyright © 2012 Elsevier Ltd. All rights reserved.

Radiation Effects on Advanced Flash Memories

NASA Technical Reports Server (NTRS)

Nguyen, D. N.; Guertin, S.; Swift, G. M.; Johnston, A. H.

1998-01-01

Flash memories have evolved very rapidly in recent ears. New design techniques such as multilevel storage have been proposed to increase storage density, and are now available commercially. Threshold voltage distributions for single- and three-level technologies are compared. In order to implement this technology special circuitry must be added to allow the amount of charge stored in the floating gate to be controlled within narrow limits during the writing and also to detect the different amounts of charge during reading.

Process for removing metals from water

DOEpatents

Napier, John M.; Hancher, Charles M.; Hackett, Gail D.

1989-01-01

A process for removing metals from water including the steps of prefiltering solids from the water, adjusting the pH to between about 2 and 3, reducing the amount of dissolved oxygen in the water, increasing the pH to between about 6 and 8, adding water-soluble sulfide to precipitate insoluble sulfide- and hydroxide-forming metals, adding a flocculating agent, separating precipitate-containing floc, and postfiltering the resultant solution. The postfiltered solution may optionally be eluted through an ion exchange resin to remove residual metal ions.

Process for removing metals from water

DOEpatents

Napier, J.M.; Hancher, C.M.; Hackett, G.D.

1987-06-29

A process for removing metals from water including the steps of prefiltering solids from the water, adjusting the pH to between about 2 and 3, reducing the amount of dissolved oxygen in the water, increasing the pH to between about 6 and 8, adding water-soluble sulfide to precipitate insoluble sulfide- and hydroxide-forming metals, adding a containing floc, and postfiltering the resultant solution. The postfiltered solution may optionally be eluted through an ion exchange resin to remove residual metal ions. 2 tabs.

A comprehensive evaluation of the toxicology of experimental cigarettes manufactured with banded papers.

PubMed

Werley, Michael S; Jerome, Ann M; DeSoi, Darren J; Coggins, Christopher R E; Oldham, Michael J; McKinney, Willie J

2013-01-01

To comply with state requirements, cigarette manufacturers have added low-permeability bands to the cigarette paper. These bands can extinguish the cigarette when it is no longer being puffed by a smoker. This study was conducted to evaluate the toxicology resulting from the addition of different types of bands to experimental cigarettes. A battery of assays that are typically used in toxicology studies with cigarette smoke, namely smoke chemistry, in vitro mutagenicity and cytotoxicity, and inhalation studies with rats, were used to evaluate different band characteristics added to cigarette paper. Although differences in the amount of band material was associated with an increase in some metals measured in mainstream tobacco smoke, it was not dose responsive to any band design parameter (base paper permeability, band width, band spacing, band chalk amount, or citrate). Occasional, minor differences were produced by the different types of bands; overall, there was no increased toxicity. Although there were increases and decreases in some mainstream smoke constituents, the in vitro and in vivo testing performed demonstrated that low-permeability bands on cigarettes do not modify the toxicity of smoke inhaled by smokers.

Methods of saccharification of polysaccharides in plants

DOEpatents

Howard, John; Fake, Gina

2014-04-29

Saccharification of polysaccharides of plants is provided, where release of fermentable sugars from cellulose is obtained by adding plant tissue composition. Production of glucose is obtained without the need to add additional .beta.-glucosidase. Adding plant tissue composition to a process using a cellulose degrading composition to degrade cellulose results in an increase in the production of fermentable sugars compared to a process in which plant tissue composition is not added. Using plant tissue composition in a process using a cellulose degrading enzyme composition to degrade cellulose results in decrease in the amount of cellulose degrading enzyme composition or exogenously applied cellulase required to produce fermentable sugars.

Nutrient content of precipitation over Iowa

Treesearch

M. A. Tabatabai; J. M. Laflen

1976-01-01

Nutrient content and pH of precipitation samples collected at six sites during 1971-1973 were studied to determine the reaction of rainfall and snowmelt and the amounts of N, S, and P added by precipitation over Iowa. The amount of NH4-N added by precipitation per hectare annually at each site was about equal to that added as NO3...

Biochar enables anaerobic digestion of aqueous phase from intermediate pyrolysis of biomass.

PubMed

Torri, Cristian; Fabbri, Daniele

2014-11-01

Intermediate pyrolysis produces a two-phase liquid whose aqueous phase is characterized by low heating value and high water content (aqueous pyrolysis liquid, APL). Anaerobic digestion can be the straightest way to produce a fuel (methane) from this material. Batch tests showed poor performance in anaerobic digestion of APL, which underlined the inhibition of biological process. Nutrient supplementation was ineffective, whereas biochar addition increased yield of methane (60±15% of theoretical) with respect to pure APL (34±6% of theoretical) and improved the reaction rate. On the basis of batch results, a semi-continuous biomethanation test was set up, by adding an increasingly amount of APL in a 30ml reactor preloaded with biochar (0.8gml(-1)). With a daily input of 5gd(-1)l(-1) of APL (corresponding to overall amount of 0.1kgl(-1) added before the end of the study) the yield of methane was 65±5% of the theoretical. Copyright © 2014 Elsevier Ltd. All rights reserved.

Sequestration and Distribution Characteristics of Cd(II) by Microcystis aeruginosa and Its Role in Colony Formation.

PubMed

Bi, Xiangdong; Yan, Ran; Li, Fenxiang; Dai, Wei; Jiao, Kewei; Zhou, Qixing; Liu, Qi

2016-01-01

To investigate the sequestration and distribution characteristics of Cd(II) by Microcystis aeruginosa and its role in Microcystis colony formation, M. aeruginosa was exposed to six different Cd(II) concentrations for 10 days. Cd(II) exposure caused hormesis in the growth of M. aeruginosa . Low concentrations of Cd(II) significantly induced formation of small Microcystis colonies ( P < 0.05) and increased the intracellular polysaccharide (IPS) and bound extracellular polysaccharide (bEPS) contents of M. aeruginosa significantly ( P < 0.05). There was a linear relationship between the amount of Cd(II) sequestrated by algal cells and the amount added to cultures in the rapid adsorption process that occurred during the first 5 min of exposure. After 10 d, M. aeruginosa sequestrated nearly 80% of 0.2 mg L -1 added Cd(II), while >93% of Cd(II) was sequestrated in the groups with lower added concentrations of Cd(II). More than 80% of the sequestrated Cd(II) was bioadsorbed by bEPS. The Pearson correlation coefficients of exterior and interior factors related to colony formation of M. aeruginosa revealed that Cd(II) could stimulate the production of IPS and bEPS via increasing Cd(II) bioaccumulation and bioadsorption. Increased levels of cross-linking between Cd(II) and bEPS stimulated algal cell aggregation, which eventually promoted the formation of Microcystis colonies.

Sequestration and Distribution Characteristics of Cd(II) by Microcystis aeruginosa and Its Role in Colony Formation

PubMed Central

Bi, Xiangdong; Yan, Ran; Li, Fenxiang; Dai, Wei; Jiao, Kewei; Liu, Qi

2016-01-01

To investigate the sequestration and distribution characteristics of Cd(II) by Microcystis aeruginosa and its role in Microcystis colony formation, M. aeruginosa was exposed to six different Cd(II) concentrations for 10 days. Cd(II) exposure caused hormesis in the growth of M. aeruginosa. Low concentrations of Cd(II) significantly induced formation of small Microcystis colonies (P < 0.05) and increased the intracellular polysaccharide (IPS) and bound extracellular polysaccharide (bEPS) contents of M. aeruginosa significantly (P < 0.05). There was a linear relationship between the amount of Cd(II) sequestrated by algal cells and the amount added to cultures in the rapid adsorption process that occurred during the first 5 min of exposure. After 10 d, M. aeruginosa sequestrated nearly 80% of 0.2 mg L−1 added Cd(II), while >93% of Cd(II) was sequestrated in the groups with lower added concentrations of Cd(II). More than 80% of the sequestrated Cd(II) was bioadsorbed by bEPS. The Pearson correlation coefficients of exterior and interior factors related to colony formation of M. aeruginosa revealed that Cd(II) could stimulate the production of IPS and bEPS via increasing Cd(II) bioaccumulation and bioadsorption. Increased levels of cross-linking between Cd(II) and bEPS stimulated algal cell aggregation, which eventually promoted the formation of Microcystis colonies. PMID:27777956

Multiyear Subcontractor Selection Criteria Analysis.

DTIC Science & Technology

1983-09-01

advancement are program instability, higher costs, and increased lead-times. Compounding the instability created by advancing technology are changes in...drive smaller firms out of business (17:46). Technology is advancing at an ever increasing pace, demanding higher performance and larger amounts of engi...Process Adding to the external factors mentioned above, the weapon systems acquisition process tends to retard pro- ductivity advancements by its very

Removing tannins from medicinal plant extracts using an alkaline ethanol precipitation process: a case study of Danshen injection.

PubMed

Gong, Xingchu; Li, Yao; Qu, Haibin

2014-11-14

The alkaline ethanol precipitation process is investigated as an example of a technique for the removal of tannins extracted from Salviae miltiorrhizae Radix et Rhizoma for the manufacture of Danshen injection. More than 90% of the tannins can be removed. However, the recoveries of danshensu, rosmarinic acid, and salvianolic acid B were less than 60%. Total tannin removal increased as the refrigeration temperature decreased or the amount of NaOH solution added increased. Phenolic compound recoveries increased as refrigeration temperature increased or the amount of NaOH solution added decreased. When operated at a low refrigeration temperature, a relative high separation selectivity can be realized. Phenolic compound losses and tannin removal were mainly caused by precipitation. The formation of phenol salts, whose solubility is small in the mixture of ethanol and water used, is probably the reason for the precipitation. A model considering dissociation equilibrium and dissolution equilibrium was established. Satisfactory correlation results were obtained for phenolic compound recoveries and total tannin removal. Two important parameters in the model, which are the water content and pH value of alkaline supernatant, are suggested to be monitored and controlled to obtain high batch-to-batch consistency.

Effects of Adding Corn Dried Distiller Grains with Solubles (DDGS) to the Dairy Cow Diet and Effects of Bedding in Dairy Cow Slurry on Fugitive Methane Emissions.

PubMed

Massé, Daniel I; Jarret, Guillaume; Benchaar, Chaouki; Hassanat, Fadi

2014-12-09

The specific objectives of this experiment were to investigate the effects of adding 10% or 30% corn dried distillers grains with solubles (DDGS) to the dairy cow diet and the effects of bedding type (wood shavings, straw or peat moss) in dairy slurry on fugitive CH₄ emissions. The addition of DDGS10 to the dairy cow diet significantly increased (29%) the daily amount of fat excreted in slurry compared to the control diet. The inclusion of DDGS30 in the diet increased the daily amounts of excreted DM, volatile solids (VS), fat, neutral detergent fiber (NDF), acid detergent fiber (ADF) and hemicellulose by 18%, 18%, 70%, 30%, 15% and 53%, respectively, compared to the control diet. During the storage experiment, daily fugitive CH₄ emissions showed a significant increase of 15% (p < 0.05) for the slurry resulting from the corn DDGS30 diet. The addition of wood shavings and straw did not have a significant effect on daily fugitive CH₄ emissions relative to the control diet, whereas the addition of peat moss caused a significant increase of 27% (p < 0.05) in fugitive CH₄ emissions.

Exposure to food advertising on television among US children.

PubMed

Powell, Lisa M; Szczypka, Glen; Chaloupka, Frank J

2007-06-01

To examine exposure to food advertising on television (TV) among children aged 2 through 11 years. Weighted examination of the distribution of national advertisements (ads) using TV ratings data. National ads from 170 top-rated TV shows viewed by children aged 2 through 11 years from September 1, 2003, through May 31, 2004. Sample of 224,083 ads. Television nonprogram content time was assessed across 6 mutually exclusive categories that included food products, non-fast food restaurants, fast food restaurants, other products, public service announcements, and TV promotions. Food advertising was assessed according to 7 food categories--cereal, snacks, sweets, beverages, fast food restaurants, non-fast food restaurants, and other food products--and then examined across more detailed categories. In 2003-2004, 27.2% and 36.4% of children's exposure to total nonprogram content time and product advertising, respectively, was for food-related products. Similar distributions were found by race. Cereal was the most frequently seen food product, making up 27.6% of all food ads. Comparisons with previous studies suggest that, over time, food ads account for a smaller share of the product ads seen by US children. Children aged 2 through 11 years are exposed to a substantial amount of food advertising through TV, but the dramatic increase in childhood obesity rates during the past few decades was not mirrored by similar changes in food advertising exposure. However, we found evidence of a very recent (2000-2005) upward trend in the amount of exposure to food advertising on TV among US children.

Risk of subacute ruminal acidosis in sheep with separate access to forage and concentrate.

PubMed

Commun, L; Mialon, M M; Martin, C; Baumont, R; Veissier, I

2009-10-01

This study aimed to investigate whether sheep offered free-choice intake of forage and concentrate develop subacute ruminal acidosis (SARA) and to identify SARA-associated feeding behavior components. In a crossover design over two 28-d periods, 11 rumen-cannulated wethers received wheat and alfalfa hay in 2 separate compartments. Concentrate and forage were provided for ad libitum access or in a fixed amount corresponding to 80% of ad libitum hay intake with a concentrate:forage ratio of 60:40 on a DM basis. In both diets, sheep were fed 2 equal portions at 0800 and 1600 h. Ruminal pH, voluntary intake, and feeding behavior were recorded continuously from d 1 to 9 and d 15 to 23 in each period. When no measurements were performed, the animals were housed in larger pens with straw bedding. When fed for ad libitum intake, the sheep ingested 1,340 g of DM/d consisting of 49.1% wheat, whereas with the fixed diet they ate 872 g of DM/d consisting of 58.4% wheat. Sheep fed for ad libitum intake spent more time with ruminal pH < 5.6 than when fed in fixed amounts (7.77 vs. 3.05 h/d, P < 0.001). The time spent with ruminal pH <5.6 was mainly linked to the amount of feed ingested and especially the amount of wheat (P < 0.001). Our results suggest that when fed for ad libitum intake with free choice wheat, the achieved concentrate:forage ratio of near 50:50 and a larger hay intake enable sheep to consume more wheat. When sheep were fed for ad libitum intake, feeding bouts were spread evenly throughout the day. Although ruminal pH reached the same minimum level in both diets after main meals, time to reach pH nadir was longer with ad libitum diet (P < 0.001). In addition, after reaching this minimum value, ruminal pH increased more slowly in this diet, inducing a decreased preprandial ruminal pH (P < 0.001). Consequently, the ad libitum diet led to a longer time below pH 5.6. A slow decrease in ruminal pH may enable sheep to consume larger quantities of food. However, free access to concentrate maintains continuously elevated content of ruminal fermentation end products and so requires more time for pH to return to neutral values. Thus, interval between feed distributions should be as large as possible to help resume the preprandial ruminal pH and to limit time spent with pH <5.6.

GEOMORPHOLOGICAL STUDIES IN THE LITTLE MIAMI RIVER (INITIALLY, OTHER STREAM SYSTEMS TO BE ADDED LATER)

EPA Science Inventory

Changes in the amount and types of land use in a watershed can destabilize stream channel structure, increase sediment loading and degrade in-stream habitat. Stream classification systems (e.g., Rosgen) may be useful for determining the susceptibility of stream channel segments t...

PLUTONIUM ALLOYS CONTAINING CONTROLLED AMOUNTS OF PLUTONIUM ALLOTROPES OBTAINED BY APPLICATION OF HIGH PRESSURES

DOEpatents

Elliott, R.O.; Gschneidner, K.A. Jr.

1962-07-10

A method of making stabilized plutonium alloys which are free of voids and cracks and have a controlled amount of plutonium allotropes is described. The steps include adding at least 4.5 at.% of hafnium, indium, or erbium to the melted plutonium metal, homogenizing the resulting alloy at a temperature of 450 deg C, cooling to room temperature, and subjecting the alloy to a pressure which produces a rapid increase in density with a negligible increase in pressure. The pressure required to cause this rapid change in density or transformation ranges from about 800 to 2400 atmospheres, and is dependent on the alloying element. (AEC)

Influence of Lanthanum on Solidification, Microstructure, and Mechanical Properties of Eutectic Al-Si Piston Alloy

NASA Astrophysics Data System (ADS)

Ahmad, R.; Asmael, M. B. A.

2016-07-01

The effects of Lanthanum (La) concentration on the solidification parameters of the α-Al, Al-Si, and Al-Cu phases and on the microstructure, tensile, and hardness properties of eutectic Al-Si-Cu-Mg alloy were systematically investigated. The solidification parameters were examined using computer-aided cooling curve thermal analysis (CA-CCTA). The cooling curve and microstructure analysis showed that La altered the Si structure. The nucleation and growth temperatures of eutectic Si decreased when 0.3 wt.% La was added, and a high depression temperature was obtained with 1.0 wt.% La. High amounts of La considerably modified the Si structure and decreased the area and aspect ratio by 69.9 and 51%, respectively. The thermal analysis result recorded a faster freezing time with the La addition and a 36% alteration in the secondary dendrite arm spacing. Two secondary or ternary La-rich intermetallic phases were formed with needle- and plate-like structures. Furthermore, the mechanical properties were investigated by hardness and tensile tests with different La concentrations. The addition of small amounts of La (0.1 wt.%) significantly improved the ultimate tensile strength and quality index of the Al-Si-Cu-Mg alloy. In addition, the hardness value of Al-11Si-Cu increased by 7-8% with the increasing amount of La added.

Characteristics of sugar surfactants in stabilizing proteins during freeze-thawing and freeze-drying.

PubMed

Imamura, Koreyoshi; Murai, Katsuyuki; Korehisa, Tamayo; Shimizu, Noriyuki; Yamahira, Ryo; Matsuura, Tsutashi; Tada, Hiroko; Imanaka, Hiroyuki; Ishida, Naoyuki; Nakanishi, Kazuhiro

2014-06-01

Sugar surfactants with different alkyl chain lengths and sugar head groups were compared for their protein-stabilizing effect during freeze-thawing and freeze-drying. Six enzymes, different in terms of tolerance against inactivation because of freeze-thawing and freeze-drying, were used as model proteins. The enzyme activities that remained after freeze-thawing and freeze-drying in the presence of a sugar surfactant were measured for different types and concentrations of sugar surfactants. Sugar surfactants stabilized all of the tested enzymes both during freeze-thawing and freeze-drying, and a one or two order higher amount of added sugar surfactant was required for achieving protein stabilization during freeze-drying than for the cryoprotection. The comprehensive comparison showed that the C10-C12 esters of sucrose or trehalose were the most effective through the freeze-drying process: the remaining enzyme activities after freeze-thawing and freeze-drying increased at the sugar ester concentrations of 1-10 and 10-100 μM, respectively, and increased to a greater extent than for the other surfactants at higher concentrations. Results also indicate that, when a decent amount of sugar was also added, the protein-stabilizing effect of a small amount of sugar ester through the freeze-drying process could be enhanced. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Effects of Adding Corn Dried Distiller Grains with Solubles (DDGS) to the Dairy Cow Diet and Effects of Bedding in Dairy Cow Slurry on Fugitive Methane Emissions

PubMed Central

Massé, Daniel I.; Jarret, Guillaume; Benchaar, Chaouki; Hassanat, Fadi

2014-01-01

Simple Summary The objectives of this experiment were to investigate the effects of adding corn DDGS to the dairy cow diet as well as the bedding types (wood shavings, straw or peat moss) on manure fugitive CH4 emissions. The incorporation of DDGS in the diet has increased manure methane emission by 15% and the use of peat moss as bedding has increased manure methane emission by 27%. Abstract The specific objectives of this experiment were to investigate the effects of adding 10% or 30% corn dried distillers grains with solubles (DDGS) to the dairy cow diet and the effects of bedding type (wood shavings, straw or peat moss) in dairy slurry on fugitive CH4 emissions. The addition of DDGS10 to the dairy cow diet significantly increased (29%) the daily amount of fat excreted in slurry compared to the control diet. The inclusion of DDGS30 in the diet increased the daily amounts of excreted DM, volatile solids (VS), fat, neutral detergent fiber (NDF), acid detergent fiber (ADF) and hemicellulose by 18%, 18%, 70%, 30%, 15% and 53%, respectively, compared to the control diet. During the storage experiment, daily fugitive CH4 emissions showed a significant increase of 15% (p < 0.05) for the slurry resulting from the corn DDGS30 diet. The addition of wood shavings and straw did not have a significant effect on daily fugitive CH4 emissions relative to the control diet, whereas the addition of peat moss caused a significant increase of 27% (p < 0.05) in fugitive CH4 emissions. PMID:26479012

[Effect of three kinds of rare earth oxides on chromaticity and mechanical properties of zirconia ceramic].

PubMed

Huang, Hui; Zhang, Fu-qiang; Sun, Jing; Gao, Lian

2006-06-01

To evaluate the colouration of zirconia ceramic by adding three kinds of rare earth oxides. The influence of the pigments concentration on the mechanical properties and the microstructure was also analyzed. Added different concentrations of CeO(2), Er(2)O(3) and Pr(6)O(11) in tetragonal zirconia poly crystals stabilized with 3 mol% yttria (3Y-T2P) powder, compacted at 200 MPa using cold isostatic pressure, and sintered to 1 400 degrees C. The heating rate was 150 degrees C/h and the dwelling time was 2 hours. The chromaticity of sintered bodies was measured with chroma meter. The relative density, hardness, flexure strength and fracture toughness were investigated as well. The phase stability of the colorized and pure zirconia was evaluated by X-ray diffraction (XRD) using an automated diffractometer. The microstructures of the specimens were evaluated by scanning electron microscope (SEM). Several kinds of color achieved by the different pigments praseodym oxide, cerium oxide and erbium oxide were presented in the CIELab system. The a* value increased with the added amount of Er(2)O(3), while b* value rose with the increasing amount of CeO(2) and Pr(6)O(11). However, three pigments failed to decrease L* value and the sintered body appeared too bright. Adding three pigments influenced flexure strength of zirconia ceramic significantly, but had little influence on the hardness and fracture toughness. Microscopy revealed the relationship between the porosity and shapes of grains was correlated to strength of the diphase ceramics. No additional phase could be detected by XRD, except t-ZrO(2) in all colorized samples after sintering at 1 400 degrees C for 120 min. Zirconia ceramic can be colorized by CeO(2), Er(2)O(3), and Pr(6)O(11). Pigments even in a small amount influence the mechanical properties of the colorized zirconia material, which necessitates further investigation.

Thermal In-Pouch Microwave Sterilization

DTIC Science & Technology

2011-06-30

dynamic range, ’ precision, ■ accuracy, ’ recovery (function of the amount of yogurt added to vial), ■ specificity (TOO Page-24 Quarterly...8217 accuracy, ■ recovery (function of the amount of yogurt added to vial). specificity (TOO Page-24 Quarterly Report For the Period Ending 30 June

Electric conductivity of high explosives with carbon nanotubes

NASA Astrophysics Data System (ADS)

Rubtsov, I. A.; Pruuel, E. R.; Ten, K. A.; Kashkarov, A. O.; Kremenko, S. I.

2017-09-01

The paper presents a technique for introducing carbon nanotubes into high explosives (HEs). For a number of explosives (trinitrotoluene, pentaerythritol tetranitrate, benzotrifuroxan), it was possible to achieve the appearance of conductivity by adding a small amount (up to 1% by mass) of single-walled carbon nanotubes TUBALL COATE H2O (CNTs) produced by OCSiAl. Thus it is possible to reduce the sensitivity of explosives to static electricity by adding an insignificant part of conductive nanotubes. This will increase safety of HEs during production and application and will reduce the number of accidents.

Study on the optimal moisture adding rate of brown rice during germination by using segmented moisture conditioning method.

PubMed

Cao, Yinping; Jia, Fuguo; Han, Yanlong; Liu, Yang; Zhang, Qiang

2015-10-01

The aim of this study was to find out the optimal moisture adding rate of brown rice during the process of germination. The process of water addition in brown rice could be divided into three stages according to different water absorption speeds in soaking process. Water was added with three different speeds in three stages to get the optimal water adding rate in the whole process of germination. Thus, the technology of segmented moisture conditioning which is a method of adding water gradually was put forward. Germinated brown rice was produced by using segmented moisture conditioning method to reduce the loss of water-soluble nutrients and was beneficial to the accumulation of gamma aminobutyric acid. The effects of once moisture adding amount in three stages on the gamma aminobutyric acid content in germinated brown rice and germination rate of brown rice were investigated by using response surface methodology. The optimum process parameters were obtained as follows: once moisture adding amount of stage I with 1.06 %/h, once moisture adding amount of stage II with 1.42 %/h and once moisture adding amount of stage III with 1.31 %/h. The germination rate under the optimum parameters was 91.33 %, which was 7.45 % higher than that of germinated brown rice produced by soaking method (84.97 %). The content of gamma aminobutyric acid in germinated brown rice under the optimum parameters was 29.03 mg/100 g, which was more than two times higher than that of germinated brown rice produced by soaking method (12.81 mg/100 g). The technology of segmented moisture conditioning has potential applications for studying many other cereals.

Effects of alkylresorcinols on volume and structure of yeast-leavened bread.

PubMed

Andersson, Annica Am; Landberg, Rikard; Söderman, Thomas; Hedkvist, Sofie; Katina, Kati; Juvonen, Riikka; Holopainen, Ulla; Lehtinen, Pekka; Aman, Per

2011-01-30

Alkylresorcinols (AR) are amphiphilic phenolic compounds found in high amounts in wheat, durum wheat and rye, with different homologue composition for each cereal. The effect of different amounts of added AR from these cereals on bread volume, height, porosity and microstructure was studied. Breads with added rye bran (with high levels of AR) or acetone-extracted rye bran (with low levels of AR) were also baked, as well as breads with finely milled forms of each of these brans. Breads with high amounts of added AR, irrespective of AR homologue composition, had a lower volume, a more compact structure and an adverse microstructure compared with breads with no or low levels of added AR. AR were also shown to inhibit the activity of baker's yeast. There was no difference in bread volume and porosity between bread baked with rye bran and acetone-extracted rye bran or with brans of different particle size. Irrespective of homologue composition, AR had a negative effect on wheat bread properties when added in high amounts as purified extracts from wheat, durum wheat and rye. Natural levels of AR in rye bran, however, did not affect the volume and porosity of yeast-leavened wheat breads. 2010 Society of Chemical Industry.

Increased 5S rRNA oxidation in Alzheimer's disease.

PubMed

Ding, Qunxing; Zhu, Haiyan; Zhang, Bing; Soriano, Augusto; Burns, Roxanne; Markesbery, William R

2012-01-01

It is widely accepted that oxidative stress is involved in neurodegenerative disorders such as Alzheimer's disease (AD). Ribosomal RNA (rRNA) is one of the most abundant molecules in most cells and is affected by oxidative stress in the human brain. Previous data have indicated that total rRNA levels were decreased in the brains of subjects with AD and mild cognitive impairment concomitant with an increase in rRNA oxidation. In addition, level of 5S rRNA, one of the essential components of the ribosome complex, was significantly lower in the inferior parietal lobule (IP) brain area of subjects with AD compared with control subjects. To further evaluate the alteration of 5S rRNA in neurodegenerative human brains, multiple brain regions from both AD and age-matched control subjects were used in this study, including IP, superior and middle temporal gyro, temporal pole, and cerebellum. Different molecular pools including 5S rRNA integrated into ribosome complexes, free 5S rRNA, cytoplasmic 5S rRNA, and nuclear 5S rRNA were studied. Free 5S rRNA levels were significantly decreased in the temporal pole region of AD subjects and the oxidation of ribosome-integrated and free 5S rRNA was significantly increased in multiple brain regions in AD subjects compared with controls. Moreover, a greater amount of oxidized 5S rRNA was detected in the cytoplasm and nucleus of AD subjects compared with controls. These results suggest that the increased oxidation of 5S rRNA, especially the oxidation of free 5S rRNA, may be involved in the neurodegeneration observed in AD.

Patients' willingness-to-pay for an Alzheimer's disease medication in Canada.

PubMed

Oremus, Mark; Tarride, Jean-Eric; Pullenayegum, Eleanor; Clayton, Natasha; Raina, Parminder

2013-01-01

Alzheimer's disease (AD) is a neurodegenerative disorder highlighted by progressive declines in cognition and function. The aim of this article is to assess whether persons with AD would support out-of-pocket payment for an AD medication; to elicit the monthly dollar amounts they would pay. We recruited persons with mild or moderate AD (n = 216) from nine clinics across Canada. During one-on-one interviews, we presented our sample with four scenarios describing a medication that either treated disease symptoms or modified the course of AD; each version of the medication was alternatively presented as having a 0 % or 30 % chance of adverse effects. For each scenario, participants indicated whether they would support paying out-of-pocket for the medication (yes/no). Affirmative responses were followed with questions asking participants whether they would pay $75, $150, or $225 (Canadian dollars) per month. Levels of support ('yes' responses) ranged from 57 % to 83 % and mean willingness-to-pay ranged from $98 to $137, depending on scenario. Participants were more likely to provide affirmative responses and higher willingness-to-pay amounts when the medication modified disease or had a 0 % chance of adverse effects. Age was inversely associated with support in three scenarios and willingness-to-pay amounts in all four scenarios. Positive associations between post-secondary education and willingness-to-pay amounts were found in three scenarios. Persons with mild or moderate AD were often willing to pay out-of-pocket for AD medications. However, the mean maximum willingness-to-pay ($137) for the optimal medication scenario was lower than the average monthly cost of existing AD medications.

Modification of isoflavone profiles in a fermented soy food with almond powder.

PubMed

Park, MinHee; Jeong, Min Kyu; Kim, MiJa; Lee, JaeHwan

2012-01-01

Isoflavone profiles of a fermented soy food, cheonggukjang, were modified using almond powder. Isoflavones were analyzed by high performance liquid chromatography (HPLC) with an ultraviolet detector. Malonyl derivatives of isoflavones decreased and aglycones of isoflavones increased in samples with almond powder for 48 h. As added, almond powder increased from 0%, 5%, and 10% (w/w), amounts of aglycones increased to 21.11%, 26.63%, and 32.45% for 48 h, respectively. β-Glucosidase activity in 5% and 10% almond added samples was significantly higher than samples without addition of almond (P < 0.05). The content of succinyl daidzin and succinyl genistin, new metabolites from isoflavones, in almond-added cheonggukjang was significantly lower than control samples, implying that β-glucosidase activity from almond affected negatively the formation of succinyl derivatives (P < 0.05). Principal component analysis (PCA) for isoflavone distribution showed that first principal component (PC1) and second principal component (PC2) expressed 64.78% and 22.26% of the data variability, respectively. Biotransformation of isoflavones in any fermented soy foods can be achieved using natural products containing high β-glucosidase activity such as almond. The results of this study can help to modify the structural transformation of phytochemicals in any fermented soy foods using natural products. Adjusting the content of almond powder can achieve wanted profiles, for example, high aglycones content. Also, content of metabolites such as succinyl derivatives can be controlled using proper amounts of almond and fermentation time. © 2011 Institute of Food Technologists®

Influence of zinc on biogas production and antibiotic resistance gene profiles during anaerobic digestion of swine manure.

PubMed

Zhang, Ranran; Wang, Xiaojuan; Gu, Jie; Zhang, Yajun

2017-11-01

This study determined the accumulated biogas, methane content, and absolute abundances (AAs) of 14 common antibiotic resistance genes (ARGs) and two integrons during the anaerobic digestion of swine manure for 52days with different amounts of added zinc. The accumulated biogas increased by 51.2% and 56.0% with 125mgL -1 (L) and 1250mgL -1 (H) zinc, respectively, compared with the control with no added zinc (CK), but there was no significant difference between L and H. Compared with CK, excluding tetW and tetC, all the other ARGs detected in this study increased in the L and H reactors. However, the low concentration of zinc (L reactor) caused greater increases in the AAs of ARGs in the AD products. Redundancy analysis showed that NO 3 -N and bio-zinc significantly explained the changes in genes, where they accounted for 60.9% and 20.3% of the total variation in the environmental factors, respectively. Copyright © 2017. Published by Elsevier Ltd.

THE RESEARCH ON THERMAL PROPERTIES AND HYDROPHOBILITY OF THE NATIVE STARCH/HYDROLYSIS STARCH BLENDS WITH TREATED CaCO{sub 3} POWDER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, C.-I; Huang, C.-Y.

In this research, hydrolysis starch was added into the starch blends to study the thermal properties. The enthalpy of blends had a significant decrease to 109J/g as content of treated CaCO{sub 3} increased to 5wt%. The modified starch was degraded slightly to produce glucose in the hydrolysis treatment. The amount of glucose in native starch and hydrolysis starch was 0.09 {mu}mol and 0.14 {mu}mol by the DNS measurement. Moreover, CaCO{sub 3} treated with titanium coupling agent was also added to improve miscibility and hydrophobility in the starch blends. The contact angle of the blends increased from 60 deg. to 95more » deg. when 15wt% treated CaCO{sub 3} was added. Treated CaCO{sub 3} was confirmed to improve the hydrophobility of starch blends effectively.« less

27 CFR 4.10 - Meaning of terms.

Code of Federal Regulations, 2014 CFR

2014-04-01

... part. Act. The Federal Alcohol Administration Act. Added brandy. Brandy or wine spirits for use in... water. Restored pure condensed must. Pure condensed must to which has been added an amount of water not exceeding the amount removed in the dehydration process. Sugar. Pure cane, beet, or dextrose sugar in dry...

27 CFR 4.10 - Meaning of terms.

Code of Federal Regulations, 2012 CFR

2012-04-01

... part. Act. The Federal Alcohol Administration Act. Added brandy. Brandy or wine spirits for use in... water. Restored pure condensed must. Pure condensed must to which has been added an amount of water not exceeding the amount removed in the dehydration process. Sugar. Pure cane, beet, or dextrose sugar in dry...

27 CFR 4.10 - Meaning of terms.

Code of Federal Regulations, 2013 CFR

2013-04-01

... part. Act. The Federal Alcohol Administration Act. Added brandy. Brandy or wine spirits for use in... water. Restored pure condensed must. Pure condensed must to which has been added an amount of water not exceeding the amount removed in the dehydration process. Sugar. Pure cane, beet, or dextrose sugar in dry...

27 CFR 4.10 - Meaning of terms.

Code of Federal Regulations, 2011 CFR

2011-04-01

... part. Act. The Federal Alcohol Administration Act. Added brandy. Brandy or wine spirits for use in... water. Restored pure condensed must. Pure condensed must to which has been added an amount of water not exceeding the amount removed in the dehydration process. Sugar. Pure cane, beet, or dextrose sugar in dry...

Amount of Hispanic youth exposure to food and beverage advertising on Spanish- and English-language television.

PubMed

Fleming-Milici, Frances; Harris, Jennifer L; Sarda, Vishnudas; Schwartz, Marlene B

2013-08-01

Exposure to large numbers of television advertisements for foods and beverages with little or no nutritional value likely contributes to poor diet among youth. Given higher rates of obesity and overweight for Hispanic youth, it is important to understand the amount and types of food advertising they view. To quantify the amount of food and beverage advertising viewed by Hispanic youth on Spanish- and English-language television and compare it with the amount of food and beverage advertising viewed by non-Hispanic youth. Data on gross rating points that measured advertising viewed on national broadcast and cable television in 2010 using a Nielsen panel of television-viewing households of Hispanic and non-Hispanic preschoolers (2-5 years), children (6-11 years), and adolescents (12-17 years). Food and beverage television advertisements viewed on English- and Spanish-language television by product category and television-viewing times by age and language preference. EXPOSURE Food and beverage advertising on Spanish- and English-language television. RESULTS In 2010, Hispanic preschoolers, children, and adolescents viewed, on average, 11.6 to 12.4 television food ads per day; the majority of these ads (75%-85%) appeared on English-language television. Fast food represented a higher proportion of food ads on Spanish-language television. Consistent with television-viewing patterns, Hispanic preschoolers saw more Spanish-language food advertisements than did Hispanic children and adolescents. Owing to somewhat less food advertising on Spanish-language television, Hispanic children and adolescents viewed 14% and 24% fewer food ads overall, respectively, compared with non-Hispanic youth. Spanish-language television viewing was highly concentrated among youth who primarily speak Spanish. Both Hispanic and non-Hispanic youth view large numbers of television advertisements for nutrient-poor categories of food and beverage. Although Hispanic children and adolescents see somewhat fewer of these ads, the higher obesity rates among Hispanic youth, the greater exposure by Hispanic preschoolers, and the potential enhanced effects of targeted advertising on Hispanic youth suggest that this exposure may pose additional risks for Hispanic youth. Continued monitoring is warranted owing to food companies' stated intentions to increase marketing to Hispanics.

Effects of Mechanically Deboned Chicken Meat (MDCM) and Collagen on the Quality Characteristics of Semi-dried Chicken Jerky

PubMed Central

Song, Dong-Heon; Choi, Ji-Hun; Choi, Yun-Sang; Kim, Hyun-Wook; Hwang, Ko-Eun; Kim, Yong-Jae; Ham, Youn-Kyung; Kim, Cheon-Jei

2014-01-01

This study was conducted to determine the effects of using mechanically deboned chicken meat (MDCM) and collagen on quality characteristics of semi-dried chicken jerky. In experiment I, semi-dried chicken jerky was prepared with the replacement of chicken breast with MDCM (0, 10, 20, and 30%). The pH value of the jerky formulated with only chicken breast was 5.94, while the replacement of chicken breast with MDCM significantly increased the pH (p<0.05). The protein content and shear force of the jerkies decreased with increasing amounts of MDCM, whereas the fat, ash content and processing yield showed the opposite tendency (p<0.05). Replacement with up to 10% MDCM had no adverse effects on the sensory characteristics of the semi-dried chicken jerky. In experiment II, four levels of pork collagen (0, 1, 2, and 3%) were added to the semi-dried chicken jerky formulated with 90% chicken breast and 10% MDCM. The addition of collagen increased the moisture content, but decreased the ash content of the jerkies produced (p<0.05). The processing yield of the jerkies increased with increasing added amounts of collagen (p<0.05). It was found that the jerkies formulated with 0-2% collagen had significantly higher overall acceptance score than those prepared with 3% collagen (p<0.05). In conclusion, MDCM and collagen could be useful ingredients to reduce the production cost and improve the processing yield of semi-dried chicken jerky. The optimal levels of MDCM and collagen which could be added without adverse effects on the sensory characteristics were up to 10% and 2%, respectively. PMID:26761667

PRECIPITATION OF PLUTONOUS PEROXIDE

DOEpatents

Barrick, J.G.; Manion, J.P.

1961-08-15

A precipitation process for recovering plutonium values contained in an aqueous solution is described. In the process for precipitating plutonium as plutonous peroxide, hydroxylamine or hydrazine is added to the plutoniumcontaining solution prior to the addition of peroxide to precipitate plutonium. The addition of hydroxylamine or hydrazine increases the amount of plutonium precipitated as plutonous peroxide. (AEC)

Glass fiber addition strengthens low-density ablative compositions

NASA Technical Reports Server (NTRS)

Chandler, H. H.

1974-01-01

Approximately 15% of E-glass fibers was added to compositions under test and greatly improved char stability. Use of these fibers also reduced thermal strains which, in turn, minimized char shrinkage and associated cracks, subsurface voids, and disbonds. Increased strength allows honeycomb core reinforcement to be replaced by equivalent amount of glass fibers.

Formation of acrylamide in a processed food model system, and examination of inhibitory conditions.

PubMed

Ishihara, Katsuyuki; Matsunaga, Atsushi; Miyoshi, Takayuki; Nakamura, Kazuya; Nakayama, Takashi; Ito, Shuji; Koga, Hidenori

2005-04-01

Acrylamide (AAm) is formed from asparagine (Asn) and reducing sugar during cooking of foods at high temperature. We examined the formation of AAm in a model system using a glass fiber filter paper, and looked for suitable conditions for inhibiting AAm formation. In frying, the formation rate was about 10 times that in a moistureless oven. Increase of frying temperature and frying time increased AAm formation when the residual moisture was 5% or less. AAm increased with increasing amount of glucose (Glc) addition up to 1:1 with respect to Asn, but then decreased. On the other hand, in the case of fructose, as the amount added was increased, AAm increased accordingly. The AAm formation rate with respect to Asn increased when valine (Val) was co-present in a Glc and Asn reaction system. Cysteine and lysine inhibited the AAm formation rate. Pathways for the formation of AAm are proposed.

Lead recovery from waste CRT funnel glass by high-temperature melting process.

PubMed

Hu, Biao; Hui, Wenlong

2018-02-05

In this research, a novel and effective process for waste CRT funnel glass treatment was developed. The key to this process is removal of lead from the CRT funnel glass by high-temperature melting process. Sodium carbonate powder was used as a fusion agent, sodium sulfide serves as a catalytic agent and carbon powder acts as reducing agent. Experimental results showed that lead recovery rate increased with an increase in the amount of added sodium carbonate, sodium sulfide, carbonate, temperature and holding time initially, and then reached a stable value. The maximum lead recovery rate was approximately 94%, when the optimum adding amount of sodium carbonate, sodium sulfide, carbonate, temperature and holding time were 25%, 8%, 3.6%, 1200°C and 120min, respectively. In the high-temperature melting process, lead silicate in the funnel glass was firstly reduced, and then removed. The glass slag can be made into sodium and potassium silicate by hydrolysis process. This study proposed a practical and economical process for recovery of lead and utilization of waste glass slag. Copyright © 2017 Elsevier B.V. All rights reserved.

Vegetable Purée: A Pilot Study to Increase Vegetable Consumption among School Lunch Participants in US Elementary Schools

ERIC Educational Resources Information Center

Vale, Angela; Schumacher, Julie Raeder; Cullen, Robert W.; Gam, Hae Jin

2014-01-01

Purpose/Objectives: Recent US Department of Agriculture regulations increased the amount and variety of vegetables required for school lunches. Vegetables are the most wasted components of lunch while entrées are selected and consumed by the majority of children. This study examined how adding vegetable purée to an elementary school lunch entrée…

Consumption with Large Sip Sizes Increases Food Intake and Leads to Underestimation of the Amount Consumed

PubMed Central

Bolhuis, Dieuwerke P.; Lakemond, Catriona M. M.; de Wijk, Rene A.; Luning, Pieternel A.; de Graaf, Cees

2013-01-01

Background A number of studies have shown that bite and sip sizes influence the amount of food intake. Consuming with small sips instead of large sips means relatively more sips for the same amount of food to be consumed; people may believe that intake is higher which leads to faster satiation. This effect may be disturbed when people are distracted. Objective The objective of the study is to assess the effects of sip size in a focused state and a distracted state on ad libitum intake and on the estimated amount consumed. Design In this 3×2 cross-over design, 53 healthy subjects consumed ad libitum soup with small sips (5 g, 60 g/min), large sips (15 g, 60 g/min), and free sips (where sip size was determined by subjects themselves), in both a distracted and focused state. Sips were administered via a pump. There were no visual cues toward consumption. Subjects then estimated how much they had consumed by filling soup in soup bowls. Results Intake in the small-sip condition was ∼30% lower than in both the large-sip and free-sip conditions (P<0.001). In addition, subjects underestimated how much they had consumed in the large-sip and free-sip conditions (P<0.03). Distraction led to a general increase in food intake (P = 0.003), independent of sip size. Distraction did not influence sip size or estimations. Conclusions Consumption with large sips led to higher food intake, as expected. Large sips, that were either fixed or chosen by subjects themselves led to underestimations of the amount consumed. This may be a risk factor for over-consumption. Reducing sip or bite sizes may successfully lower food intake, even in a distracted state. PMID:23372657

Nitrate photolysis in salty snow

NASA Astrophysics Data System (ADS)

Donaldson, D. J.; Morenz, K.; Shi, Q.; Murphy, J. G.

2016-12-01

Nitrate photolysis from snow can have a significant impact on the oxidative capacity of the local atmosphere, but the factors affecting the release of gas phase products are not well understood. Here, we report the first systematic study of the amounts of NO, NO2, and total nitrogen oxides (NOy) emitted from illuminated snow samples as a function of both nitrate and total salt (NaCl and Instant Ocean) concentration. We show that the release of nitrogen oxides to the gas phase is directly related to the expected nitrate concentration in the brine at the surface of the snow crystals, increasing to a plateau value with increasing nitrate, and generally decreasing with increasing NaCl or Instant Ocean (I.O.). In frozen mixed nitrate (25 mM) - salt (0-500 mM) solutions, there is an increase in gas phase NO2 seen at low added salt amounts: NO2 production is enhanced by 35% at low prefreezing [NaCl] and by 70% at similar prefreezing [I.O.]. Raman microscopy of frozen nitrate-salt solutions shows evidence of stronger nitrate exclusion to the air interface in the presence of I.O. than with added NaCl. The enhancement in nitrogen oxides emission in the presence of salts may prove to be important to the atmospheric oxidative capacity in polar regions.

Didactic discussion of stochastic resonance effects and weak signals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adair, R.K.

1996-12-01

A simple, paradigmatic, model is used to illustrate some general properties of effects subsumed under the label stochastic resonance. In particular, analyses of the transparent model show that (1) a small amount of noise added to a much larger signal can greatly increase the response to the signal, but (2) a weak signal added to much larger noise will not generate a substantial added response. The conclusions drawn from the model illustrate the general result that stochastic resonance effects do not provide an avenue for signals that are much smaller than noise to affect biology. A further analysis demonstrates themore » effects of small signals in the shifting of biologically important chemical equilibria under conditions where stochastic resonance effects are significant.« less

INFLUENCE OF HEMA CONTENT ON THE MECHANICAL AND BONDING PROPERTIES OF EXPERIMENTAL HEMA-ADDED GLASS IONOMER CEMENTS

PubMed Central

Lim, Ho-Nam; Kim, Seong-Hwan; Yu, Bin; Lee, Yong-Keun

2009-01-01

The purpose of this study was to determine the influence of incrementally added uncured HEMA in experimental HEMA-added glass ionomer cement (HAGICs) on the mechanical and shear bond strength (SBS) of these materials. Increasing contents of uncured HEMA (10-50 wt.%) were added to a commercial glass ionomer cement liquid (Fuji II, GC, Japan), and the compressive and diametral tensile strengths of the resulting HAGICs were measured. The SBS to non-precious alloy, precious alloy, enamel and dentin was also determined after these surfaces were subjected to either airborne-particle abrasion (Aa) or SiC abrasive paper grinding (Sp). Both strength properties of the HAGICs first increased and then decreased as the HEMA content increased, with a maximum value obtained when the HEMA content was 20% for the compressive strength and 40% for the tensile strength. The SBS was influenced by the HEMA content, the surface treatment, and the type of bonding surface (p<0.05). These results suggest that addition of an appropriate amount of HEMA to glass ionomer cement would increase diametral tensile strength as well as bond strength to alloys and teeth. These results also confirm that the optimal HEMA content ranged from 20 to 40% within the limitations of this experimental condition. PMID:19668995

Transport and degradation of metalaxyl and isoproturon in biopurification columns inoculated with pesticide-primed material.

PubMed

De Wilde, Tineke; Spanoghe, Pieter; Sniegowksi, Kristel; Ryckeboer, Jaak; Jaeken, Peter; Springael, Dirk

2010-01-01

Laboratory column displacement experiments were performed to examine whether addition of pesticide-primed material to the matrix of an on-farm biopurification system (BPS), intended to remove pesticides from agricultural waste water, positively affects the degradation of mobile pesticides in the system. Percolated column microcosms with varying types and amounts of metalaxyl and/or isoproturon-primed material or non-primed material were irrigated with water artificially contaminated with isoproturon and/or metalaxyl. Transport of isoproturon was well described using the convection dispersion equation and no dissipation was observed, even in columns inoculated with isoproturon-primed material. On the other hand, delayed dissipation of metalaxyl, i.e., after an initial lag phase, was encountered in all columns receiving metalaxyl. In all systems, dissipation could be described using the Monod model indicating that a metalaxyl degrading population grew in the systems. There was a clear correlation between the lag phase and the amount of metalaxyl-primed material added to the system, i.e., increasing amounts of added material resulted into shorter lag phases and hence more rapid initiation of growth-associated metalaxyl degradation in the system. Our observations suggest that indeed pesticide-primed material can reduce the start-up phase of degradation of mobile pesticides in a BPS and as such can increase its efficiency. However, the primed material should be chosen carefully and preferentially beforehand tested for its capacity to degrade the pesticide.

Memantine reduces the production of amyloid-β peptides through modulation of amyloid precursor protein trafficking.

PubMed

Ito, Kaori; Tatebe, Takuya; Suzuki, Kunimichi; Hirayama, Takashi; Hayakawa, Maki; Kubo, Hideo; Tomita, Taisuke; Makino, Mitsuhiro

2017-03-05

Memantine, an uncompetitive glutamatergic N-methyl-D-aspartate (NMDA) receptor antagonist, is widely used as medication for the treatment of Alzheimer's disease (AD). It has been reported that memantine reduces amyloid-β peptide (Aβ) levels in both neuronal cultures and in brains of animal models of AD. However, the underlying mechanism of these effects is unclear. Here we examined the effect of memantine on Aβ production. Memantine was administered to 9-month-old Tg2576 mice, a transgenic mouse model of AD, at 10 or 20mg/kg/day in drinking water for 1 month. Memantine significantly reduced the amounts of both CHAPS-soluble and CHAPS-insoluble Aβ in the brains of Tg2576 mice. Memantine at 10mg/kg/day for 1 month also reduced the levels of insoluble Aβ42 in the brains of aged F344 rats. Moreover, memantine reduced Aβ and sAPPβ levels in conditioned media from rat primary cortical cultures without affecting the enzymatic activities of α-secretase, β-secretase, or γ-secretase. Notably, in a cell-surface biotinylation assay, memantine increased the amount of amyloid precursor protein (APP) at the cell surface without changing the total amount of APP. Collectively, our results indicate that chronic treatment with memantine reduces the levels of Aβ both in AD models and in aged animals, and that memantine affects the endocytosis pathway of APP, which is required for β-secretase-mediated cleavage. This leads to a reduction in Aβ production. These results suggest that memantine reduces Aβ production and plaque deposition through the regulation of intracellular trafficking of APP. Copyright © 2017 Elsevier B.V. All rights reserved.

[Effect of calcium and magnesium ions on the interaction of corticosterone with the cytosol receptor(s) in the rat brain].

PubMed

Ueda, M

1981-01-01

The effects of calcium and magnesium ions on the corticosterone binding to rat brain cytosol receptor protein(s) were investigated. The increasing amounts of CaCl2 or MgCl2 up to 5.0 mM were added, the specific [3H] corticosterone binding increased 1.3-fold and 1.5 respectively. The addition of MnCl2 and KCl did not affect this binding. The binding of corticosterone with rat brain cytosol receptor(s) were decreased by increasing amounts of EDTA and complete inhibition was observed at concentration equal to and greater than 2.5 mM. Inhibition of this binding by EDTA was less than by EGTA. Either theophylline or dibutyryl cyclic AMP had no effect on this binding.

Increased levels of palmitoylethanolamide and other bioactive lipid mediators and enhanced local mast cell proliferation in canine atopic dermatitis

PubMed Central

2014-01-01

Background Despite the precise pathogenesis of atopic dermatitis (AD) is unknown, an immune dysregulation that causes Th2-predominant inflammation and an intrinsic defect in skin barrier function are currently the two major hypotheses, according to the so-called outside-inside-outside model. Mast cells (MCs) are involved in AD both by releasing Th2 polarizing cytokines and generating pruritus symptoms through release of histamine and tryptase. A link between MCs and skin barrier defects was recently uncovered, with histamine being found to profoundly contribute to the skin barrier defects. Palmitoylethanolamide and related lipid mediators are endogenous bioactive compounds, considered to play a protective homeostatic role in many tissues: evidence collected so far shows that the anti-inflammatory effect of palmitoylethanolamide depends on the down-modulation of MC degranulation. Based on this background, the purpose of the present study was twofold: (a) to determine if the endogenous levels of palmitoylethanolamide and other bioactive lipid mediators are changed in the skin of AD dogs compared to healthy animals; (b) to examine if MC number is increased in the skin of AD dogs and, if so, whether it depends on MC in-situ proliferation. Results The amount of lipid extract expressed as percent of biopsy tissue weight was significantly reduced in AD skin while the levels of all analyzed bioactive lipid mediators were significantly elevated, with palmitoylethanolamide showing the highest increase. In dogs with AD, the number of MCs was significantly increased in both the subepidermal and the perifollicular compartments and their granule content was significantly decreased in the latter. Also, in situ proliferation of MCs was documented. Conclusions The levels of palmitoylethanolamide and other bioactive lipid mediators were shown to increase in AD skin compared to healthy samples, leading to the hypothesis that they may be part of the body’s innate mechanisms to maintain cellular homeostasis when faced with AD-related inflammation. In particular, the increase may be considered a temptative response to down-regulating the observed elevation in the number, functionality and proliferative state of MCs in the skin of AD dogs. Further studies are warranted to confirm the hypothesis. PMID:24423192

Effect of Cold Rolling on Age Hardening in Excess Mg-Type Al-Mg-Si Alloys Including Some Minor Elements

NASA Astrophysics Data System (ADS)

Ogawa, Yurie; Matsuda, Kenji; Kawabata, Tokimasa; Uetani, Yasuhiro; Ikeno, Susumu

It has been known that transition metals improve the mechanical property of Al-Mg-Si alloy. The thermo-mechanical treatment is also effective to improve the strength of Al-Mg-Si alloy. In this work, the aging behavior of deformed excess Mg-type Al-Mg-Si alloy including Ag,Cu,Pt was investigated by hardness test and TEM observation. The value of the maximum hardness increased and the aging time to the maximum hardness became shorter by increasing the amount of the deformation. The age-hardening ability (ΔHV) was decreased with increasing amount of the deformation. The effect of additional element on AHV was also similar to the result of the deformation described above. Comparing the value of the maximum hardness for the alloys aged at 423-523 K, the ex. Mg-Cu alloy was the highest, the ex. Mg-Ag alloy was middle, and the ex. Mg and ex. Mg-Pt alloys were the lowest because of total amounts of added elements.

26 CFR 1.338-7 - Allocation of redetermined ADSP and AGUB among target assets.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Effects on Corporation § 1.338-7 Allocation of... such amount as an increase or decrease would be required under general principles of tax law for the... original allocation to it, the difference is added to or subtracted from the original allocation to the...

[Effect of soybean lipoxygenae on baking properties of wheat flour].

PubMed

Permiakova, M D; Trufanov, V A

2011-01-01

Changes in bread-baking properties of wheat flour caused by soybean lipoxygenase and polyunsaturated fatty acids were studied. A positive effect of soybean flour added during dough kneading in an amount of 2% was demonstrated. A method for dough fermentation increasing the loaf volume and improving organoleptic characteristics and total bread-baking estimate is recommended.

Effects of agents that inactivate free radical NO (NO•) on nitroxyl anion-mediated relaxations, and on the detection of NO• released from the nitroxyl anion donor Angeli's salt

PubMed Central

Ellis, Anthie; Lu, Hong; Li, Chun Guang; Rand, Michael J

2001-01-01

The effects of agents that inactivate free radical nitric oxide (carboxy-PTIO, hydroxocobalamin and pyrogallol) were tested on relaxations produced by the nitroxyl anion (NO−) donor Angeli's salt in rat aortic rings and anococcygeus muscles. The amount of NO• generated from Angeli's salt in the presence of these agents was measured using a NO•-selective electrode sensor. Carboxy-PTIO (100, 300 μM), hydroxocobalamin (30, 100 μM) and pyrogallol (10, 30 μM) significantly reduced relaxations produced by Angeli's salt (0.3 μM) in aortic rings but not in anococcygeus muscles. NO• generated from Angeli's salt (0.1 – 10 μM), as detected by the sensor electrode, was less than 0.5% of the amount of Angeli's salt added. Carboxy-PTIO (100 μM) and hydroxocobalamin (30 μM), but not pyrogallol significantly increased the amount of NO• detected. In the presence of an oxidizing agent copper [II] (as CuSO4 100 μM), the amount of NO• detected from 0.3 μM of Angeli's salt increased from an undetectable level of 142.7±15.7 nM (equivalent to 47.6% of Angeli's salt added). Under these conditions, carboxy-PTIO, hydroxocobalamin and pyrogallol significantly reduced the amount of NO• detected from Angeli's salt as well as the signal generated by an equivalent amount of authentic NO (0.33 μM). The difference in effects of these agents on relaxations to Angeli's salt in the aorta and the anococcygeus muscle may be explained by the ready conversion of NO− to NO• in the aorta through an unidentified mechanism, which makes NO− susceptible to inactivation by these agents. Furthermore, in addition to inactivating NO•, carboxy-PTIO and hydroxocobalamin may themselves oxidize NO− to NO•, albeit slightly. PMID:11588105

[Effects of Lime on Seedling Growth,Yield and Volatile Constituents of Atractylodes lancea].

PubMed

Zhang, Yan; Miki, Sakurai; Chen, Mei-lan; Takeda, Xiuji; Zhao, Dong-yue; Kang, Li-ping; Guo, Lan-ping

2015-03-01

To investigate the effects of different amounts of lime on yield and quality of Atractylodes lancea, and to provide reference for the herb growing site soil improvement and self-poisoning ease. Add different gradients of lime, and then measure their growth targets, yield and four kinds of volatile constituents content(hinesol, atractylone, β-eudesmol and atractylodin). Volatile constituents yield per plant was calculated. Adding 160 g/m2 lime had a significant role in promoting the growth and yield of herb; Adding 80 g/m2 lime was conducive to the volatile constituents production, and adding lime decreased the atractylone and atractylodin content, while increased the hinesol and β-eudesmol content; Adding 160 g/m2 lime promoted the volatile constituents yield per plant. Adding lime plays a role of neutralize soil pH, antibacteria and prevention incognita, and has a certain degree of ease autotoxicity and obstacle,and then promotes the yield and volatile constituents production of Atractylodes lancea.

Value-added care: a paradigm shift in patient care delivery.

PubMed

Upenieks, Valda V; Akhavan, Jaleh; Kotlerman, Jenny

2008-01-01

Spiraling costs in health care have placed hospitals in a constant state of transition. As a result, nursing practice is now influenced by numerous factors and has remained in a continuous state of flux. Multiple changes within the last 2 decades in nurse/patient ratio and blend of front-line nurses are examples of this transition. To reframe the nursing practice into an economic equation that captures the cost, quality, and service, a paradigm shift in thinking is needed in order to assess work redesign. Nursing productivity must be evaluated in terms of value-added care, a vision that goes beyond direct care activities and includes team collaboration, physician rounding, increased RN-to-aide communication, and patient centeredness; all of which are crucial to the nurse's role and the patient's well-being. The science of appropriating staffing depends on assessment and implementation of systematic changes best illustrated through a "systems theory" framework. A throughput transformation is required to create process changes with input elements (number of front-line nurses) in order to increase time spent in value-added care and to decrease waste activities with an improvement in efficiency, quality, and service. The purpose of this pilot study was two-fold: (a) to gain an understanding of how much time RNs spent in value-added care, and (b) whether increasing the combined level of RNs and unlicensed assistive personnel increased the amount of time spent in value-added care compared to time spent in necessary tasks and waste.

Antioxidative and Neuroprotective Effects of Curcumin in an Alzheimer's Disease Rat Model Co-Treated with Intracerebroventricular Streptozotocin and Subcutaneous D-Galactose.

PubMed

Huang, Han-Chang; Zheng, Bo-Wen; Guo, Yu; Zhao, Jian; Zhao, Jiang-Yan; Ma, Xiao-Wei; Jiang, Zhao-Feng

2016-04-05

Epidemiological data imply links between the increasing incidences of Alzheimer's disease (AD) and type 2 diabetes mellitus. In this study, an AD rat model was established by combining treatments with intracerebroventricular streptozotocin (icv-STZ) and subcutaneous D-galactose, and the effects of curcumin on depressing AD-like symptoms were investigated. In the AD model group, rats were treated with icv-STZ in each hippocampus with 3.0 mg/kg of bodyweight once and then were subcutaneously injected with D-galactose daily (125 mg/kg of bodyweight) for 7 weeks. In the curcumin-protective group, after icv-STZ treatment, rats were treated with D-galactose (the same as in the AD model group) and intraperitoneally injected with curcumin daily (10 mg/kg of bodyweight) for 7 weeks. Vehicle-treated rats were treated as control. Compared with the vehicle control, the amount of protein carbonylation and glutathione in liver, as well as malondialdehyde in serum, were upregulated but glutathione peroxidase activity in blood was downregulated in the AD model group. The shuttle index and locomotor activity of rats in the AD model group were decreased compared with the vehicle control group. Furthermore, AD model rats showed neuronal damage and neuron loss with formation of amyloid-like substances and neurofibrillary tangles, and the levels of both β-cleavage of AβPP and phosphorylation of tau (Ser396) were significantly increased compared with the vehicle control group. Notably, compared with the AD model group, oxidative stress was decreased and the abilities of active avoidance and locomotor activity were improved, as well as attenuated neurodegeneration, in the curcumin-protective group. These results imply the applications of this animal model for AD research and of curcumin in the treatment of AD.

Dreaming under antidepressants: a systematic review on evidence in depressive patients and healthy volunteers.

PubMed

Tribl, Gotthard G; Wetter, Thomas C; Schredl, Michael

2013-04-01

Sleep related symptoms of depression include sleep fragmentation, early morning awakening, decreased rapid eye movement (REM) sleep latency, increased REM density, and more negative dream content. Most tricyclic antidepressants (ADs) increase total sleep time and decrease wake time after sleep onset, while many selective serotonin reuptake inhibitors (SSRIs) have an opposite effect. However, almost all ADs prolong REM sleep latency and reduce the amount of REM sleep. Case reports and research data indicate a strong effect of ADs on dream recall and dream content. We performed a systematic review (1950 to August 2010) about ADs impact on dreaming in depressive patients and healthy volunteers. Twenty-one clinical studies and 25 case reports were eligible for review and document a clear AD effect on dreaming. The major finding, both in depressed patients and in healthy volunteers, is a decrease of dream recall frequency (DRF) under ADs. This is a rather consistent effect in tricyclic ADs and phenelzine, less consistently documented also for SSRIs/serotonin norepinephrine reuptake inhibitors (SNRIs). Tricyclic ADs induce more positive dream emotions. Withdrawal from tricyclic ADs and from the monoamine oxidase inhibitors phenelzine and tranylcypromine may cause nightmares. Intake and even more withdrawal of SSRIs/SNRIs seem to intensify dreaming, which may be experienced in different ways; a potential to cause nightmares has to be taken into account. Though there are clear-cut pharmacological effects of ADs on DRF and dream content, publications have been surprisingly scarce during the past 60 years. There is evidence of a gap in neuropsychopharmacological research. AD effects on dreams should be recognized and may be used in treatment. Copyright © 2012 Elsevier Ltd. All rights reserved.

Differential bioaccumulation and translocation patterns in three mangrove plants experimentally exposed to iron. Consequences for environmental sensing.

PubMed

Arrivabene, Hiulana Pereira; Campos, Caroline Quenupe; Souza, Iara da Costa; Wunderlin, Daniel Alberto; Milanez, Camilla Rozindo Dias; Machado, Silvia Rodrigues

2016-08-01

Avicennia schaueriana, Laguncularia racemosa and Rhizophora mangle were experimentally exposed to increasing levels of iron (0, 10, 20 and 100 mg L(-1) added Fe(II) in Hoagland's nutritive medium). The uptake and translocation of iron from roots to stems and leaves, Fe-secretion through salt glands (Avicennia schaueriana and Laguncularia racemosa) as well as anatomical and histochemical changes in plant tissues were evaluated. The main goal of this work was to assess the diverse capacity of these plants to detect mangroves at risk in an area affected by iron pollution (Vitoria, Espírito Santo, Brazil). Results show that plants have differential patterns with respect to bioaccumulation, translocation and secretion of iron through salt glands. L. racemosa showed the best environmental sensing capacity since the bioaccumulation of iron in both Fe-plaque and roots was higher and increased as the amount of added-iron rose. Fewer changes in translocation factors throughout increasing added-iron were observed in this species. Furthermore, the amount of iron secreted through salt glands of L. racemosa was strongly inhibited when exposed to added-iron. Among three studied species, A. schaueriana showed the highest levels of iron in stems and leaves. On the other hand, Rhizophora mangle presented low values of iron in these compartments. Even so, there was a significant drop in the translocation factor between aerial parts with respect to roots, since the bioaccumulation in plaque and roots of R. mangle increased as iron concentration rose. Moreover, rhizophores of R. mangle did not show changes in bioaccumulation throughout the studied concentrations. So far, we propose L. racemosa as the best species for monitoring iron pollution in affected mangroves areas. To our knowledge, this is the first detailed report on the response of these plants to increasing iron concentration under controlled conditions, complementing existing data on the behavior of the same plants under field exposure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effect of soluble calcium on the renneting properties of casein micelles as measured by rheology and diffusing wave spectroscopy.

PubMed

Sandra, S; Ho, M; Alexander, M; Corredig, M

2012-01-01

Addition of calcium chloride to milk has positive effects on cheese-making because it decreases coagulation time, creates firmer gels, and increases curd yield. Although addition of calcium chloride is a widely used industrial practice, the effect of soluble calcium on the preliminary stages of gelation is not fully understood. In addition, it is not known whether the manner of addition and equilibration of the soluble calcium would affect the rennetability of the casein micelles. Therefore, the aim of this paper was to study the details of the coagulation behavior of casein micelles in the presence of additional calcium, and to elucidate whether the manner in which this cation is added (directly as calcium chloride or by gradual exchange through dialysis) affects the functionality of the micelles. Calcium was added as CaCl(2) (1 mM final added concentration) directly to skim milk or indirectly using dialysis against 50 volumes of milk. Additional soluble calcium did not affect the primary phase of the renneting reaction, as demonstrated by the analysis of the casein macropeptide (CMP) released in solution; however, it shortened the coagulation time of the micelles and increased the firmness of the gel. The turbidity parameter of samples with or without calcium showed that similar amounts of CMP were needed for particle interactions to commence. However, the amount of CMP released at the point of gelation, as indicated by rheology, was lesser for samples with added calcium, which can be attributed to a greater extent of calcium bridging on the surface or between micelles. The results also showed that the manner in which calcium was presented to the micelles did not influence the mechanism of gelation. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The role of astrocytes in amyloid β-protein toxicity and clearance.

PubMed

Thal, Dietmar Rudolf

2012-07-01

The deposition of the amyloid β-protein (Aβ) in the brain is a pathological hallmark of Alzheimer's disease (AD). Here, Aβ deposits occur as Aβ plaques in the brain parenchyma and in the walls of cerebral and leptomeningeal blood vessels. Astrocytes are considered to be involved in the clearance of Aβ from the brain parenchyma into the perivascular space, across the blood-brain barrier, or by enzymatic degradation. As such it has been assumed that clearance of Aβ by astrocytes is beneficial. In a recent study published in Experimental Neurology Mulder et al. (2012; 233: 373-379) report changes in neprilysin and scavenger receptor class B member 1 gene expression in astrocytes exposed to fibrillar Aβ depending on the availability of amyloid-associated proteins, especially apolipoprotein E (apoE). Astrocytes from AD patients did not show this response in gene expression. Reactive astrocytes and Aβ containing astrocytes are common findings in the AD brain. A loss of excitatory amino acid transporter 2 expression in perivascular astrocytes of APOE ε4-positive AD cases and an alteration of neuronal apoE metabolism in the event of perivascular drainage of apoE-Aβ complexes has also been described. As such, reactive and compensatory changes in AD astrocytes compete with supporting functions of astrocytes finally leading to an impairment of metabolic support and transmitter recycling in the brain. In summary, exposure of astrocytes to increased amounts of Aβ over a long period in time very likely impairs the above mentioned supporting functions of astrocytes in AD patients because these cells have to clear large amounts of Aβ and, thereby, neglect their other functions. Copyright © 2012 Elsevier Inc. All rights reserved.

[Changes in the consumption of dairy products, sugary drinks and processed juices in the Chilean population].

PubMed

Crovetto, Mirta M; Uauy, Ricardo

2014-12-01

Nowadays, Chilean population tends to replace or eat a lower amount of food with health protective properties and a higher proportion of unhealthy foodstuff. To describe and compare the intake of dairy products, sugary drinks and processed juices among Chileans. An analysis of data compiled from the Survey on Household Budget and Expenses carried out by the Chilean National Institute of Statistics (INE), using a representative sample of households. The sample was surveyed between 1987 and 2007. The analysis was performed for all households surveyed and for households belonging to the second (highest incomes) and fifth quintile (lowest incomes). The Chilean Food Guide and the international recommendations of the Institute of Medicine of the United States and the American Heart Association (in the case of sugars) were used as reference. Even though the intake of dairy products increased during the period of the survey, it was lower than the intake of sugary drinks and juices, which increased. Also, calcium recommendations were not covered. On the other hand, the intake of added sugars increased to figures over current recommendations. The intake of dairy products and calcium is below the recommended amounts established by international organisms, and added sugars intake is greater than the advisable levels recommended by international organisms.

Faba beans and peas in poultry feed: economic assessment.

PubMed

Proskina, Liga; Cerina, Sallija

2017-10-01

Broiler diets mainly consist of cereals and protein-rich feed sources; in the EU-27, poultry farming consumes 24% of the total amount of protein-rich feedstuffs. Since the EU produces only 30% of the total quantity of protein crops used for feed, it is necessary to promote the use of traditional European protein crops (beans, peas) for feed in livestock farming. The research aim is to identify economic gains from the production of broiler chicken meat, replacing soybean meal with domestic faba beans and field peas in broiler chicken diets. Adding field peas and faba beans to the broiler feed ration resulted in a significant live weight increase (5.74-11.95%) at the selling age, a decrease in the feed conversion ratio by 0.61-6.06%, and decrease in the product unit cost (15.34-37.06%) as well as an increase in the production efficiency factor (8.70-48.54), compared with the control group. The optimum kind of legume species used in the broiler diet was peas, which were added in the amount of 200 g kg -1 , resulting in live weight gain, a decrease in the feed conversion ratio and an increase in the production efficiency factor. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Application of lean six sigma to waste minimization in cigarette paper industry

NASA Astrophysics Data System (ADS)

Syahputri, K.; Sari, R. M.; Anizar; Tarigan, I. R.; Siregar, I.

2018-02-01

The cigarette paper industry is one of the industry that is always experiencing increasing demand from consumers. Consumer expectations for the products produced also increased both in terms of quality and quantity. The company continuously improves the quality of its products by trying to minimize nonconformity, waste and improve the efficiency of the whole production process of the company. In this cigarette industry, there is a disability whose value is above the company’s defect tolerance that is 10% of the production amount per month. Another problem also occurs in the production time is too long due to the many activities that are not value added (non value added activities) on the production floor. To overcome this problem, it is necessary to improve the production process of cigarette paper and minimize production time by reducing non value added activities. Repairs done with Lean Six Sigma. Lean Six Sigma is a combination of Lean and Six Sigma concept with DMAIC method (Define, Measure, Analyze, Improve, Control). With this Lean approach, obtained total production time of 1479.13 minutes proposal with cycle efficiency process increased by 12.64%.

Biomaterials for the Treatment of Alzheimer's Disease.

PubMed

Hadavi, Darya; Poot, André A

2016-01-01

Alzheimer's disease (AD) as a progressive and fatal neurodegenerative disease represents a huge unmet need for treatment. The low efficacy of current treatment methods is not only due to low drug potency but also due to the presence of various obstacles in the delivery routes. One of the main barriers is the blood-brain barrier. The increasing prevalence of AD and the low efficacy of current therapies have increased the amount of research on unraveling of disease pathways and development of treatment strategies. One of the interesting areas for the latter subject is biomaterials and their applications. This interest originates from the fact that biomaterials are very useful for the delivery of therapeutic agents, such as drugs, proteins, and/or cells, in order to treat diseases and regenerate tissues. Recently, manufacturing of nano-sized delivery systems has increased the efficacy and delivery potential of biomaterials. In this article, we review the latest developments with regard to the use of biomaterials for the treatment of AD, including nanoparticles and liposomes for delivery of therapeutic compounds and scaffolds for cell delivery strategies.

Two Phase Admission Control for QoS Mobile Ad Hoc Networks

NASA Astrophysics Data System (ADS)

Chen, Chien-Sheng; Su, Yi-Wen; Liu, Wen-Hsiung; Chi, Ching-Lung

In this paper a novel and effective two phase admission control (TPAC) for QoS mobile ad hoc networks is proposed that satisfies the real-time traffic requirements in mobile ad hoc networks. With a limited amount of extra overhead, TPAC can avoid network congestions by a simple and precise admission control which blocks most of the overloading flow-requests in the route discovery process. When compared with previous QoS routing schemes such as QoS-aware routing protocol and CACP protocols, it is shown from system simulations that the proposed scheme can increase the system throughput and reduce both the dropping rate and the end-to-end delay. Therefore, TPAC is surely an effective QoS-guarantee protocol to provide for real-time traffic.

[Small amounts of milk added to coffee or tea can be allowed before surgery].

PubMed

Miranda, Kenia S; Kristensen, Billy B

2018-03-26

The ingestion of milk is not allowed within six hours before elective procedures requiring anaesthesia or sedation, because milk is considered a solid food. However, the impact of milk suspended in coffee or tea consumed up to two hours before anaesthesia is less certain, yet fasting guidelines demand surgery to be delayed or rescheduled. Studies investigating ingestion of liquids with small amounts of milk have not demonstrated delayed emptying of the stomach, thereby increasing the risk of aspiration in elective procedures. Maybe it is time to adjust the fasting recommendations.

Influence of lithium slag from lepidolite on the durability of concrete

NASA Astrophysics Data System (ADS)

Qi, Luo; Shaowen, Huang; Yuxuan, Zhou; Jinyang, Li; Weiliang, Peng; Yufeng, Wen

2017-04-01

This paper mainly studies the effect of lithium slag from lepidolite on the property of concrete including dry shrinkage, anti-carbonation, wear resistance and chloride ion resistance. Concrete interface structure has been observed with SEM. The results show that adding lithium slag to concrete can improve concrete property including dry shrinkage, wear resistance and chloride ion resistance. However, the wear resistance tends to decrease when the amount of lithium slag reach 20%. Lithium slag also has negative effect on anti-carbonation property. With the increasing amount of lithium slag, anti-carbonation property of concrete decrease gradually.

TOTAL ORE PROCESSING INTEGRATION AND MANAGEMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leslie Gertsch; Richard Gertsch

2005-05-16

The lessons learned from ore segregation test No.3 were presented to Minntac Mine personnel during the reporting period. Ore was segregated by A-Factor, with low values going to Step 1/2 and high values going to Step 3. During the test, the mine maintained the best split possible for the given production and location constraints. During the test, Step 1&2 A-Factor was lowered more than Step 3 was raised. All other ore quality changes were not manipulated, but the segregation by A-Factor affected most of the other qualities. Magnetic iron, coarse tails, fine tails, silica, and grind changed in response tomore » the split. Segregation was achieved by adding ore from HIS to the Step 3 blend and lowering the amount of LC 1&2 and somewhat lowering the amount of LC 3&4. Conversely, Step 1&2 received less HIS with a corresponding increase in LC 1&2. The amount of IBC was increased to both Steps about one-third of the way into the test. For about the center half of the test, LC 3&4 was reduced to both Steps. The most noticeable layer changes were, then: an increase in the HIS split; a decrease in the LC 1&2 split; adding IBC to both Steps; and lowering LC 3&4 to both Steps. Statistical analysis of the dataset collected during ordinary, non-segregated operation of the mine and mill is continuing. Graphical analysis of blast patterns according to drill monitor data was slowed by student classwork. It is expected to resume after the semester ends in May.« less

Survival and reproduction of some nematodes as affected by muck and organic acids.

PubMed

Elmiligy, I A; Norton, D C

1973-01-01

Fulvic, humic, acetic, N-bulyric, formic, lactic, and propionic acids were inhibitory to the survival or reproduction of Aphelenchus avenae, Aphelenchoides goodeyi, Helicotylenchus pseudorobustus, Meloidogyne hapla or Xiphinema americanum. Reproduction of H. pseudorobustus and M. hapla significantly increased with increasing amounts of muck added to sand, and with the initial amount of nematode inoculum. All acids except humic and fulvic were lethal, in vitro, to all nematode species tested. When A. goodeyi was treated with fulvic acid, reproduction was reduced significantly when compared with sodium humate or water treatments. Treatment of H. pseudorobustus with fulvic acid (pH 3.5) resulted in a greater reduction in reproduction in soil than did treatment with humic acid (pH 3.5).

No difference in ad libitum energy intake in healthy men and women consuming beverages sweetened with fructose, glucose, or high-fructose corn syrup: a randomized trial.

PubMed

Kuzma, Jessica N; Cromer, Gail; Hagman, Derek K; Breymeyer, Kara L; Roth, Christian L; Foster-Schubert, Karen E; Holte, Sarah E; Callahan, Holly S; Weigle, David S; Kratz, Mario

2015-12-01

Increased energy intake is consistently observed in individuals consuming sugar-sweetened beverages (SSBs), likely mainly because of an inadequate satiety response to liquid calories. However, SSBs have a high content of fructose, the consumption of which acutely fails to trigger responses in key signals involved in energy homeostasis. It is unclear whether the fructose content of SSBs contributes to the increased energy intake in individuals drinking SSBs. We investigated whether the relative amounts of fructose and glucose in SSBs modifies ad libitum energy intake over 8 d in healthy adults without fructose malabsorption. We conducted 2 randomized, controlled, double-blind crossover studies to compare the effects of consuming 4 servings/d of a fructose-, glucose-, or aspartame-sweetened beverage (study A; n = 9) or a fructose-, glucose-, or high-fructose corn syrup (HFCS)-sweetened beverage (study B; n = 24) for 8 d on overall energy intake. SSBs were provided at 25% of estimated energy requirement, or an equivalent volume of the aspartame-sweetened beverage, and consumption was mandatory. All solid foods were provided at 125% of estimated energy requirements and were consumed ad libitum. In study A, ad libitum energy intake was 120% ± 10%, 117% ± 12%, and 102% ± 15% of estimated energy requirements when subjects consumed the fructose-, glucose-, and aspartame-sweetened beverages. Energy intake was significantly higher in the fructose and glucose phases than in the aspartame phase (P < 0.003 for each), with no difference between the fructose and glucose phases (P = 0.462). In study B, total energy intake during the fructose, HFCS, and glucose phases was 116% ± 14%, 116% ± 16%, and 116% ± 16% of the subject's estimated total energy requirements (P = 0.880). In healthy adults, total 8-d ad libitum energy intake was increased in individuals consuming SSBs compared with aspartame-sweetened beverages. The energy overconsumption observed in individuals consuming SSBs occurred independently of the relative amounts of fructose and glucose in the beverages. These trials were registered at clinicaltrials.gov as NCT00475475 and NCT01424306. © 2015 American Society for Nutrition.

No difference in ad libitum energy intake in healthy men and women consuming beverages sweetened with fructose, glucose, or high-fructose corn syrup: a randomized trial1

PubMed Central

Kuzma, Jessica N; Cromer, Gail; Hagman, Derek K; Breymeyer, Kara L; Roth, Christian L; Foster-Schubert, Karen E; Holte, Sarah E; Callahan, Holly S; Weigle, David S; Kratz, Mario

2015-01-01

Background: Increased energy intake is consistently observed in individuals consuming sugar-sweetened beverages (SSBs), likely mainly because of an inadequate satiety response to liquid calories. However, SSBs have a high content of fructose, the consumption of which acutely fails to trigger responses in key signals involved in energy homeostasis. It is unclear whether the fructose content of SSBs contributes to the increased energy intake in individuals drinking SSBs. Objective: We investigated whether the relative amounts of fructose and glucose in SSBs modifies ad libitum energy intake over 8 d in healthy adults without fructose malabsorption. Design: We conducted 2 randomized, controlled, double-blind crossover studies to compare the effects of consuming 4 servings/d of a fructose-, glucose-, or aspartame-sweetened beverage (study A; n = 9) or a fructose-, glucose-, or high-fructose corn syrup (HFCS)–sweetened beverage (study B; n = 24) for 8 d on overall energy intake. SSBs were provided at 25% of estimated energy requirement, or an equivalent volume of the aspartame-sweetened beverage, and consumption was mandatory. All solid foods were provided at 125% of estimated energy requirements and were consumed ad libitum. Results: In study A, ad libitum energy intake was 120% ± 10%, 117% ± 12%, and 102% ± 15% of estimated energy requirements when subjects consumed the fructose-, glucose-, and aspartame-sweetened beverages. Energy intake was significantly higher in the fructose and glucose phases than in the aspartame phase (P < 0.003 for each), with no difference between the fructose and glucose phases (P = 0.462). In study B, total energy intake during the fructose, HFCS, and glucose phases was 116% ± 14%, 116% ± 16%, and 116% ± 16% of the subject’s estimated total energy requirements (P = 0.880). Conclusions: In healthy adults, total 8-d ad libitum energy intake was increased in individuals consuming SSBs compared with aspartame-sweetened beverages. The energy overconsumption observed in individuals consuming SSBs occurred independently of the relative amounts of fructose and glucose in the beverages. These trials were registered at clinicaltrials.gov as NCT00475475 and NCT01424306. PMID:26537945

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joshi, Gauri S; Romagnoli, Simona; Verberkmoes, Nathan C

Rhodopseudomonas palustris is unique among characterized nonsulfur purple bacteria because of its capacity for anaerobic photoheterotrophic growth using aromatic acids. Like growth with other reduced electron donors, this growth typically requires the presence of bicarbonate/CO{sub 2} or some other added electron acceptor in the growth medium. Proteomic studies indicated that there was specific accumulation of form I ribulose 1, 5-bisphosphate carboxylase/oxygenase (RubisCO) subunit proteins (CbbL and CbbS), as well as the CbbX protein, in cells grown on benzoate without added bicarbonate; such cells used the small amounts of dissolved CO{sub 2} in the medium to support growth. These proteins weremore » not observed in extracts from cells grown in the presence of high levels (10 mM) of added bicarbonate. To confirm the results of the proteomics studies, it was shown that the total RubisCO activity levels were significantly higher (five- to sevenfold higher) in wild-type (CGA010) cells grown on benzoate with a low level (0.5 mM) of added bicarbonate. Immunoblots indicated that the increase in RubisCO activity levels was due to a specific increase in the amount of form I RubisCO (CbbLS) and not in the amount of form II RubisCO (CbbM), which was constitutively expressed. Deletion of the main transcriptional regulator gene, cbbR, resulted in impaired growth on benzoate-containing low-bicarbonate media, and it was established that form I RubisCO synthesis was absolutely and specifically dependent on CbbR. To understand the regulatory role of the CbbRRS two-component system, strains with nonpolar deletions of the cbbRRS genes were grown on benzoate. Distinct from the results obtained with photoautotrophic growth conditions, the results of studies with various CbbRRS mutant strains indicated that this two-component system did not affect the observed enhanced synthesis of form I RubisCO under benzoate growth conditions. These studies indicate that diverse growth conditions differentially affect the ability of the CbbRRS two-component system to influence cbb transcription.« less

Boosting biogas production from sewage sludge by adding small amount of agro-industrial by-products and food waste residues.

PubMed

Maragkaki, A E; Fountoulakis, M; Kyriakou, A; Lasaridi, K; Manios, T

2018-01-01

In Greece, in many cities, wastewater treatment plants (WWTPs) operate their own anaerobic digestion (AD) facility in order to treat sewage sludge rather than achieve optimum biogas production. Nowadays, there is a growing interest regarding the addition of other co-substrates in these existing facilities in order to increase gas yield from the biomass. This practice may be possible by adding small amount of co-substrates which will not affect significantly in the designed hydraulic retention time. Nonetheless, the lack of experimental data regarding this option is a serious obstacle. In this study, the effect of co-digestion sewage sludge, with small amount of agro-industrial by-products and food wastes is examined in lab-scale experiments. Specifically, co-digestion of SS and food waste (FW), grape residues (GR), crude glycerol (CG), cheese whey (CW) and sheep manure (SM), in a small ratio of 5-10% (v/v) was investigated. The effect of agro-industrial by-products and food waste residues on biogas production was investigated using one 1L and three 3L lab-scale reactors under mesophilic conditions at a 24-day hydraulic retention time. The biogas production rate reached 223, 259, 406, 572, 682 and 1751 mlbiogas/lreactor/d for 100% SS, 5% SM & 95% SS, 10% CW & 90% SS, 5% FW & 95% SS, 5% FW & 5% CG & 90% SS and 5% CG & 95% SS respectively. Depending on the co-digestion material, the average removal of total chemical oxygen demand (TCOD) ranged between 20% (5% SM & 95% SS) and 76% (5% FW & 5% CG & 90% SS). Reduction in the volatile solids ranged between 26% (5% SM & 95% SS) and 62% (5% FW & 5% CG & 90% SS) for organic loading rates between 0.8kgVSm -3 d -1 and 2.0kgVSm -3 d -1 . Moreover, co-digestion improved biogas production from 14% (5% SM & 95% SS) to 674% (5% CG & 95% SS). This work suggests that WWTPs in Greece can increase biogas production by adding other wastes to the sewage sludge without affecting the operation of existing digesters and without requiring additional facilities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Adaptation of continuous biogas reactors operating under wet fermentation conditions to dry conditions with corn stover as substrate.

PubMed

Kakuk, Balázs; Kovács, Kornél L; Szuhaj, Márk; Rákhely, Gábor; Bagi, Zoltán

2017-08-01

Corn stover (CS) is the agricultural by-product of maize cultivation. Due to its high abundance and high energy content it is a promising substrate for the bioenergy sector. However, it is currently neglected in industrial scale biogas plants, because of its slow decomposition and hydrophobic character. To assess the maximum biomethane potential of CS, long-term batch fermentations were carried out with various substrate concentrations and particle sizes for 72 days. In separate experiments we adapted the biogas producing microbial community in wet fermentation arrangement first to the lignocellulosic substrate, in Continuous Stirred Tank Reactor (CSTR), then subsequently, by continuously elevating the feed-in concentration, to dry conditions in solid state fermenters (SS-AD). In the batch tests, the <10 mm fraction of the grinded and sieved CS was amenable for biogasification, but it required 10% more time to produce 90% of the total biomethane yield than the <2 mm sized fraction, although in the total yields there was no significant difference between the two size ranges. We also observed that increasing amount of substrate added to the fermentation lowered the specific methane yield. In the CSTR experiment, the daily substrate loading was gradually increased from 1 to 2 g vs /L/day until the system produced signs of overloading. Then the biomass was transferred to SS-AD reactors and the adaptation process was studied. Although the specific methane yields were lower in the SS-AD arrangement (177 mL CH 4 /g vs in CSTR vs. 105 mL in SS-AD), the benefits of process operational parameters, i.e. lower energy consumption, smaller reactor volume, digestate amount generated and simpler configuration, may compensate the somewhat lower yield. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Effects of rice bran fiber on heat-induced gel prepared with pork salt-soluble meat proteins in model system.

PubMed

Choi, Yun-Sang; Choi, Ji-Hun; Han, Doo-Jeong; Kim, Hack-Youn; Lee, Mi-Ai; Kim, Hyun-Wook; Jeong, Jong-Youn; Kim, Cheon-Jei

2011-05-01

The technological effects of rice bran fiber on pork salt-soluble meat proteins in a model system were investigated. Rice bran fiber at levels of 0% (control), 0.1%, 0.5%, 1%, and 2% was added at the same time as salt-soluble meat protein to maintain similar moisture levels in all samples. Samples with increasing amounts of added rice bran fiber had higher pH, yellowness, sarcoplasmic and total protein solubilities. The moisture content, myofibrillar protein solubility and water holding capacity were the highest in the treatments containing with 1% rice bran fiber. However, the lightness and redness, textural properties decreased with increasing rice bran fiber levels. SDS gel electrophoresis did not reveal any changes in proteins regardless different rice bran fiber levels. The apparent viscosity indicated that improvements in water holding capacity and decreased texture due to added rice bran fiber. Copyright © 2010 The American Meat Science Association. All rights reserved.

Cut Back on Your Kid's Sweet Treats: 10 Tips to Decrease Added Sugars

MedlinePlus

... healthy eating by limiting the amount of added sugars they eat. Sweet treats and sugary drinks have lots of calories but few nutrients. Most added sugars come from sodas; sports, energy, and fruit drinks; ...

Should genes with missing data be excluded from phylogenetic analyses?

PubMed

Jiang, Wei; Chen, Si-Yun; Wang, Hong; Li, De-Zhu; Wiens, John J

2014-11-01

Phylogeneticists often design their studies to maximize the number of genes included but minimize the overall amount of missing data. However, few studies have addressed the costs and benefits of adding characters with missing data, especially for likelihood analyses of multiple loci. In this paper, we address this topic using two empirical data sets (in yeast and plants) with well-resolved phylogenies. We introduce varying amounts of missing data into varying numbers of genes and test whether the benefits of excluding genes with missing data outweigh the costs of excluding the non-missing data that are associated with them. We also test if there is a proportion of missing data in the incomplete genes at which they cease to be beneficial or harmful, and whether missing data consistently bias branch length estimates. Our results indicate that adding incomplete genes generally increases the accuracy of phylogenetic analyses relative to excluding them, especially when there is a high proportion of incomplete genes in the overall dataset (and thus few complete genes). Detailed analyses suggest that adding incomplete genes is especially helpful for resolving poorly supported nodes. Given that we find that excluding genes with missing data often decreases accuracy relative to including these genes (and that decreases are generally of greater magnitude than increases), there is little basis for assuming that excluding these genes is necessarily the safer or more conservative approach. We also find no evidence that missing data consistently bias branch length estimates. Copyright © 2014 Elsevier Inc. All rights reserved.

Modeling of recovery mechanism of ozone zero phenomenaby adding small amount of nitrogen in atmospheric pressure oxygen dielectric barrier discharges

NASA Astrophysics Data System (ADS)

Akashi, Haruaki; Yoshinaga, Tomokazu

2013-09-01

Ozone zero phenomena in an atmospheric pressure oxygen dielectric barrier discharges have been one of the major problems during a long time operation of ozone generators. But it is also known that the adding a small amount of nitrogen makes the recover from the ozone zero phenomena. To make clear the mechanism of recovery, authors have been simulated the discharges with using the results of Ref. 3. As a result, the recovery process can be seen and ozone density increased. It is found that the most important species would be nitrogen atoms. The reaction of nitrogen atoms and oxygen molecules makes oxygen atoms which is main precursor species of ozone. This generation of oxygen atoms is effective to increase ozone. The dependence of oxygen atom density (nO) and nitrogen atom density (nN) ratio was examined in this paper. In the condition of low nN/nO ratio case, generation of nitrogen oxide is low, and the quenching of ozone by the nitrogen oxide would be low. But in the high ratio condition, the quenching of ozone by nitrogen oxide would significant. This work was supported by KAKENHI(23560352).

Lead recovery and the feasibility of foam glass production from funnel glass of dismantled cathode ray tube through pyrovacuum process.

PubMed

Chen, Mengjun; Zhang, Fu-Shen; Zhu, Jianxin

2009-01-30

Cathode ray tube (CRT) is the first and foremost problem that must be solved in electronic waste disposal, and the key of which lies in the detoxification and reutilization of lead-contained funnel glass. In this study, a novel and effective process for funnel glass of dismantled CRT treatment was developed. The key point of the process was to recover metallic lead from the funnel glass and to prepare foam glass synchronously. Experimental results showed that lead recovery rate increased first with the increase of temperature, carbon adding amount, and holding time, then reached a plateau value, but pressure was on the contrary. The optimum temperature, pressure, carbon adding amount and holding time for lead recovery were 1000 degrees C, 1000 Pa, 5% and 4h, respectively, and the maximum lead recovery rate was 98.6%. In the pyrovacuum process, lead in the funnel glass was firstly detached and changed to PbO, then reduced and evaporated, and was recovered in the form of pure metal with a purity of 99.3%. The residue porous glass was environmentally acceptable for construction application.

Effects of Schiff Base Formation and Aldol Condensation on the Determination of Aldehydes in Rice Wine Using GC-MS.

PubMed

Han, Ji Hye; Lee, Sang Mi; Kim, Young-Suk

2017-04-11

The Schiff base reaction and aldol condensation that occur during sample preparation can lead to the reduction of aldehyde content in the analysis of traditional Korean rice wine, makgeolli. The contents of aldehydes were decreased, whereas those of hydroxy carbonyl compounds were increased by increasing the pH. In the presence of added amino acids, the levels of aldehydes in makgeolli were reduced as the amount of the amino acid alanine increased. Also, the contents of hydroxyl carbonyl compounds were reduced by alanine addition as compared to the control. Therefore, the determination of aldehydes can be affected by pH and the amount of amino acids, which can vary during fermentation and storage of alcoholic beverages because pH and amino acids affect Schiff base formation and aldol condensation.

Isolation of levoglucosan from pyrolysis oil derived from cellulose

DOEpatents

Moens, Luc

1994-01-01

High purity levoglucosan is obtained from pyrolysis oil derived from cellulose by: mixing pyrolysis oil with water and a basic metal hydroxide, oxide, or salt in amount sufficient to elevate pH values to a range of from about 12 to about 12.5, and adding an amount of the hydroxide, oxide, or salt in excess of the amount needed to obtain the pH range until colored materials of impurities from the oil are removed and a slurry is formed; drying the slurry azeotropically with methyl isobutyl ketone solvent to form a residue, and further drying the residue by evaporation; reducing the residue into a powder; continuously extracting the powder residue with ethyl acetate to provide a levoglucosan-rich extract; and concentrating the extract by removing ethyl acetate to provide crystalline levoglucosan. Preferably, Ca(OH).sub.2 is added to adjust the pH to the elevated values, and then Ca(OH).sub.2 is added in an excess amount needed.

Isolation of levoglucosan from pyrolysis oil derived from cellulose

DOEpatents

Moens, L.

1994-12-06

High purity levoglucosan is obtained from pyrolysis oil derived from cellulose by: mixing pyrolysis oil with water and a basic metal hydroxide, oxide, or salt in amount sufficient to elevate pH values to a range of from about 12 to about 12.5, and adding an amount of the hydroxide, oxide, or salt in excess of the amount needed to obtain the pH range until colored materials of impurities from the oil are removed and a slurry is formed; drying the slurry azeotropically with methyl isobutyl ketone solvent to form a residue, and further drying the residue by evaporation; reducing the residue into a powder; continuously extracting the powder residue with ethyl acetate to provide a levoglucosan-rich extract; and concentrating the extract by removing ethyl acetate to provide crystalline levoglucosan. Preferably, Ca(OH)[sub 2] is added to adjust the pH to the elevated values, and then Ca(OH)[sub 2] is added in an excess amount needed. 3 figures.

Face-selective crystal growth behavior of L-aspartic acid in the presence of L-asparagine

NASA Astrophysics Data System (ADS)

Sato, Hiroyasu; Doki, Norihito; Yoshida, Saki; Yokota, Masaaki; Shimizu, Kenji

2016-02-01

The kinetic mechanism of L-asparagine (L-Asn) action on L-aspartic acid (L-Asp) crystal growth, namely the face-selective effect of L-Asn on the L-Asp crystal growth rate in each direction, was examined. In the a-axis direction, the effect of L-Asn on the L-Asp crystal growth rate was small. Enhancement and inhibition of L-Asp crystal growth, and interestingly the dissolution of the L-Asp crystal face, were observed in the b-axis direction, depending on the amount of L-Asn added. In the c-axis direction, the L-Asp crystal growth rate decreased with the increase in the amount of L-Asn added, and the experimental results were well fitted with a Langmuir adsorption isotherm. The study showed that there were crystal growth conditions where enhancement and inhibition, as well as inhibition and dissolution, coexisted in the presence of an additive with a structure similar to the growing crystal.

Nitrogen transformations following tropical forest felling and burning on a volcanic soil

NASA Technical Reports Server (NTRS)

Matson, Pamela A.; Vitousek, Peter M.; Ewel, John J.; Mazzarino, Maria Julia; Robertson, G. Philip

1987-01-01

Nitrogen transformations and loss were measured following forest clearing in a relatively fertile tropical forest site. Nitrogen mineralization, nitrification, and amounts of ammonium and nitrate increased substantially in surface soils during the 6 mo following burning, then returned to background levels. The nitrogen content of microbial biomass declined to half its original value 6 mo after clearing and remained low in the cleared sites. Plant uptake of nitrogen was substantial on cleared plots (50 g/sq m), but it accounted for only 18 percent of N-15 label added to field plots. MIcrobial immobilization of N-15 was small relative to that in a cleared temperate site, and measurements of denitrification potentials suggested that relatively little mineralized nitrogen was lost to the atmosphere. Substantial amounts of nitrogen (40-70 g/sq m) were retained as exchangeably bound nitrate deep in the soils of a cleared plot on which revegetation was prevented; this process accounted for 12 percent of the N-15 label added to field plots.

Converting citrus wastes into value-added products: Economic and environmently friendly approaches.

PubMed

Sharma, Kavita; Mahato, Neelima; Cho, Moo Hwan; Lee, Yong Rok

2017-02-01

Citrus fruits, including oranges, grapefruits, lemons, limes, tangerines, and mandarins, are among the most widely cultivated fruits around the globe. Its production is increasing every year due to rising consumer demand. Citrus-processing industries generate huge amounts of wastes every year, and citrus peel waste alone accounts for almost 50% of the wet fruit mass. Citrus waste is of immense economic value as it contains an abundance of various flavonoids, carotenoids, dietary fiber, sugars, polyphenols, essential oils, and ascorbic acid, as well as considerable amounts of some trace elements. Citrus waste also contains high levels of sugars suitable for fermentation for bioethanol production. However, compounds such as D-limonene must be removed for efficient bioethanol production. The aim of the present article was to review the latest advances in various popular methods of extraction for obtaining value-added products from citrus waste/byproducts and their potential utility as a source of various functional compounds. Copyright © 2016 Elsevier Inc. All rights reserved.

12 CFR Appendix A to Part 360 - Non-Monetary Transaction File Structure

Code of Federal Regulations, 2010 CFR

2010-01-01

... maturity dates, but all owners are the same Character (25). 7. PH_Hold_Action Hold ActionThe requested hold... = Add 8. PH_Hold_Amt Hold Amount Decimal (14,2). Dollar amount of the FDIC hold to be removed or added 9. PH_Hold_Desc Hold Description Character (225). FDIC hold to be removed or added [73 FR 41197, July 17...

12 CFR Appendix A to Part 360 - Non-Monetary Transaction File Structure

Code of Federal Regulations, 2013 CFR

2013-01-01

... maturity dates, but all owners are the same Character (25). 7. PH_Hold_Action Hold ActionThe requested hold... = Add 8. PH_Hold_Amt Hold Amount Decimal (14,2). Dollar amount of the FDIC hold to be removed or added 9. PH_Hold_Desc Hold Description Character (225). FDIC hold to be removed or added [73 FR 41197, July 17...

12 CFR Appendix A to Part 360 - Non-Monetary Transaction File Structure

Code of Federal Regulations, 2014 CFR

2014-01-01

... maturity dates, but all owners are the same Character (25). 7. PH_Hold_Action Hold ActionThe requested hold... = Add 8. PH_Hold_Amt Hold Amount Decimal (14,2). Dollar amount of the FDIC hold to be removed or added 9. PH_Hold_Desc Hold Description Character (225). FDIC hold to be removed or added [73 FR 41197, July 17...

12 CFR Appendix A to Part 360 - Non-Monetary Transaction File Structure

Code of Federal Regulations, 2011 CFR

2011-01-01

... maturity dates, but all owners are the same Character (25). 7. PH_Hold_Action Hold ActionThe requested hold... = Add 8. PH_Hold_Amt Hold Amount Decimal (14,2). Dollar amount of the FDIC hold to be removed or added 9. PH_Hold_Desc Hold Description Character (225). FDIC hold to be removed or added [73 FR 41197, July 17...

12 CFR Appendix A to Part 360 - Non-Monetary Transaction File Structure

Code of Federal Regulations, 2012 CFR

2012-01-01

... maturity dates, but all owners are the same Character (25). 7. PH_Hold_Action Hold ActionThe requested hold... = Add 8. PH_Hold_Amt Hold Amount Decimal (14,2). Dollar amount of the FDIC hold to be removed or added 9. PH_Hold_Desc Hold Description Character (225). FDIC hold to be removed or added [73 FR 41197, July 17...

Effects of source of trace minerals and plane of nutrition on growth and health of transported neonatal dairy calves.

PubMed

Osorio, J S; Wallace, R L; Tomlinson, D J; Earleywine, T J; Socha, M T; Drackley, J K

2012-10-01

The aims of the experiment were to evaluate the effects of source of trace minerals (TM) and plane of nutrition (PN) early in life on growth and health of transported calves. Ninety male Holstein calves <1 wk old were assigned to treatments in a 2×2 factorial arrangement of PN and TM source in a randomized complete block design. Calves assigned to low PN (LPN) received milk replacer [22% crude protein (CP), 20% fat, 568 g of powder/d for wk 1 to 4, and 284 g of powder/d for wk 5] plus ad libitum access to starter [18% CP, dry matter (DM) basis, for wk 1 to 12] and a limited amount of hay (0.5 kg/d as fed, for wk 10 to 12); LPN calves were weaned at 6 wk. During wk 13 to 20, LPN calves were fed 3.2 kg/d of grower mix (16% CP, DM basis) plus chopped hay for ad libitum intake. Calves assigned to high PN (HPN) received variable amounts of milk replacer (28% CP; 20% fat; and 810, 1,136, and 568 g of powder/d for wk 1, 2 to 6, and 7, respectively) plus ad libitum access to starter (22% CP, DM basis, wk 1 to 12) and limited hay (0.5 kg/d as fed, for wk 10 to 12); HPN calves were weaned at wk 7. Calves assigned to HPN were offered grower mix for ad libitum intake plus a limited amount of chopped hay (0.5 kg/d, as-fed basis) from wk 13 to 20. Milk replacers were formulated to contain balanced amounts of either inorganic (I) or organic (O) TM (50, 50, 10, and 100mg/kg of Zn, Mn, Cu, and Fe, respectively), whereas respective ITM or OTM starters and growers contained Zn, Mn, Cu, and Co at 70, 55, 12, and 1mg/kg. The HPN treatments increased final body weight and stature measurements, average daily gain, and gain-to-feed ratio through wk 20. Starter intake was lower for calves fed HPN. The OTM increased growth when supplemented to HPN but not when supplemented to LPN. During the liquid-feeding period, fecal scores were more fluid for calves fed HPN but measures of health status did not differ among diets. Results indicated that an enhanced nutritional program during early life allowed calves to have greater overall growth and maintain a normal health status throughout the preweaning period. High PN and OTM were synergistic in increasing early growth of calves. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Trans fatty acids enhance amyloidogenic processing of the Alzheimer amyloid precursor protein (APP).

PubMed

Grimm, Marcus O W; Rothhaar, Tatjana L; Grösgen, Sven; Burg, Verena K; Hundsdörfer, Benjamin; Haupenthal, Viola J; Friess, Petra; Kins, Stefan; Grimm, Heike S; Hartmann, Tobias

2012-10-01

Hydrogenation of oils and diary products of ruminant animals leads to an increasing amount of trans fatty acids in the human diet. Trans fatty acids are incorporated in several lipids and accumulate in the membrane of cells. Here we systematically investigate whether the regulated intramembrane proteolysis of the amyloid precursor protein (APP) is affected by trans fatty acids compared to the cis conformation. Our experiments clearly show that trans fatty acids compared to cis fatty acids increase amyloidogenic and decrease nonamyloidogenic processing of APP, resulting in an increased production of amyloid beta (Aβ) peptides, main components of senile plaques, which are a characteristic neuropathological hallmark for Alzheimer's disease (AD). Moreover, our results show that oligomerization and aggregation of Aβ are increased by trans fatty acids. The mechanisms identified by this in vitro study suggest that the intake of trans fatty acids potentially increases the AD risk or causes an earlier onset of the disease. Copyright © 2012 Elsevier Inc. All rights reserved.

Prescription drug advertising: trends and implications.

PubMed

Krupka, L R; Vener, A M

1985-01-01

Prescription drug advertisements which appeared in two leading American medical journals in 1972, 1977 and 1982 were analyzed to discover possible trends in advertising. The 5016 ads examined showed that ads for the diuretic-cardiovasculars, especially the beta-adrenergic blocking agents and the slow channel inhibitors, as well as the analgesics, had increased, while ads for the anti-infectives and tranquilizers had diminished. The average amount of space allocated for each ad had increased. On the average, most ads (69%) depicted neither male nor female patients in their graphics, and a trend of increased neutrality was observed. When the hormones were excluded, an average of 21% of the ads showed male patients and 10% showed females. Since a relationship was discerned between the leading drugs advertised and the leading prescriptions filled, it was concluded that advertising does have some effect on the prescribing behavior of practitioners. The findings suggest that great investment in advertising is necessary in order to achieve high levels of sales for such drugs as Valium (diazepam) which do not have a clear-cut ameliorative effect on a specific physiological condition. On the other hand, it was suggested that saturation advertising would not significantly enhance the sales of such drugs as Dyazide (triamterene and hydrochlorothiazide) because of its well established therapeutic value in the control of hypertension. Ten advertising companies, on the average, had purchased 67% of all advertising space and five had purchased almost half (47%). The same two pharmaceutical companies were among the top five advertisers and the same five were among the top ten for the three years studied.

Microstructure and Properties of Zircon-Added Carbon Refractories for Blast Furnace

NASA Astrophysics Data System (ADS)

Zhu, Tianbin; Li, Yawei; Sang, Shaobai; Chen, Xilai; Zhao, Lei; Li, Yuanbing; Li, Shujing

2012-11-01

Microstructure and properties of zircon-added carbon refractory specimens for blast furnace (BF) were investigated with the aid of X-ray diffraction (XRD), a scanning electron microscope (SEM), energy-dispersive X-ray, mercury porosimetry, and a laser thermal conductivity (TC) meter. Additives could influence the matrix structures and improve the properties of specimens. With the increase of zircon powder content, the amount of SiC whiskers formed increased and their aspect ratio became larger, and the SiC whiskers tended to be distributed homogeneously. Zircon powder additions decreased the mean pore diameter and increased <1- μm pore volume by filling in pores via SiC, improved the TC and the cold crushing strength (CCS) due to the in-situ formation of the more well-developed SiC whiskers with high TC, and significantly reduced the molten iron attack to carbon specimens.

Research on the effect of alkali roasting of copper dross on leaching rate of indium

NASA Astrophysics Data System (ADS)

Dafang, Liu; Fan, Xingxiang; Shi, Yifeng; Yang, Kunbin

2017-11-01

The byproduct copper dross produced during refining crude lead was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and fluorescence spectrometer (XRF), which showed that copper dross mainly contained lead, copper, zinc, arsenic, antimony, bismuth, sulfur and a small amount of indium and silver etc. The mineralogical phase change of oxidation roasting of copper dross by adding sodium hydroxide was analyzed with the help of XRD and SEM. The effects of water leaching, ratio of sodium hydroxide, roasting time, and roasting temperature on leaching rate of indium were investigated mainly. The experimental results showed that phase of lead metal and sulfides of lead, copper and zinc disappeared after oxidation roasting of copper dross by adding sodium hydroxide, new phase of oxides of lead, copper, zinc and sodium salt of arsenic and antimony appeared. Water leaching could remove arsenic, and acid leaching residue obtained was then leached with acid. The leaching rate of indium was higher 6.98% compared with alkali roasting of copper dross-acid leaching. It showed that removing arsenic by water leaching and acid leaching could increase the leaching rate of indium and be beneficial to reducing subsequent acid consumption of extracting indium by acid leaching. The roasting temperature had a significant effect on the leaching rate of indium, and leaching rate of indium increased with the rise of roasting temperature. When roasting temperature ranged from 450°C to 600°C, leaching rate of indium increased significantly with the rise of roasting temperature. When roasting temperature rose from 450°C to 600°C, leaching rate of indium increased by 60.29%. The amount of sodium hydroxide had an significant effect on the leaching rate of indium, and the leaching of indium increased with the increase of the amount of sodium hydroxide, and the leaching rate of indium was obviously higher than that of copper dross blank roasting and acid leaching.

The effects of increasing amounts of milk replacer powder added to whole milk on feed intake and performance in dairy heifers.

PubMed

Azevedo, R A; Machado, F S; Campos, M M; Furini, P M; Rufino, S R A; Pereira, L G R; Tomich, T R; Coelho, S G

2016-10-01

The aim of this study was to evaluate the effects on feed intake, heifer performance, and health of increasing the total solids (TS) content of liquid feed (whole milk) by adding increasing amounts of milk replacer powder during the pre- and postweaning periods. Crossbred Holstein-Gyr heifers (n=60) were assigned to 1 of 4 treatments (n=15 per group), which consisted of different TS concentrations: 12.5, 15.0, 17.5, and 20.0% of liquid feed. Heifers received 6 L of liquid feed per day, divided into 2 equal meals (0800 and 1600h) and provided in buckets, from 5 to 55d of age. From 56 to 59d of age, the total amount of liquid feed was reduced by half, maintaining only morning feedings. Heifers were weaned at 60d and monitored until 90d of age. Water and starter were provided ad libitum during the entire experiment. Corn silage was included in the diet during the postweaning period (70d of age). Feed intake and health scores were evaluated daily. Body weight and body frame development were recorded weekly. Starting at 14d, ruminal pH was measured every other week. Laboratory analysis determined that the actual TS contents of the liquid feed were 13.5, 16.1, 18.2, and 20.4%, for the proposed 12.5, 15.0, 17.5, and 20.0% TS treatments, respectively. The osmolality of liquid feed treatments was 265 to 533mOsm/L. Intake of liquid feed was similar among treatments from 4wk of age. During the preweaning period, starter intake, fecal score, and days with diarrhea were similar among treatments. Ruminal pH at weaning averaged 6.2 and was similar among treatments. Increasing concentrations of TS in the liquid feed were associated with linear increases in average daily gain, final body weight, and growth performance, but linear decreases in feed efficiency. During the postweaning period, intake of starter, corn silage, and water were similar among treatments, as well as average daily gain and feed efficiency. Final body weight and growth performance during the postweaning period also increased linearly with concentration of TS in liquid feed. Increasing the concentration of TS in liquid feed up to 20.4% increased performance and body frame development in dairy heifers during the pre- and postweaning periods and had no effects on solid feed intake or health. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Improvements in nanoscale zero-valent iron production by milling through the addition of alumina

NASA Astrophysics Data System (ADS)

Ribas, D.; Cernik, M.; Martí, V.; Benito, J. A.

2016-07-01

A new milling procedure for a cost-effective production of nanoscale zero-valent iron for environmental remediation is presented. Conventional ball milling of iron in an organic solvent as Mono Ethylene Glycol produces flattened iron particles that are unlikely to break even after very long milling times. With the aim of breaking down these iron flakes, in this new procedure, further milling is carried out by adding an amount of fine alumina powder to the previously milled solution. As the amount of added alumina increases from 9 to 54 g l-1, a progressive decrease of the presence of flakes is observed. In the latter case, the appearance of the particles formed by fragments of former flakes is rather homogeneous, with most of the final nanoparticles having an equivalent diameter well below 1 µm and with an average particle size in solution of around 400 nm. An additional increase of alumina content results in a highly viscous solution showing worse particle size distribution. Milled particles, in the case of alumina concentrations of 54 g l-1, have a fairly large specific surface area and high Fe(0) content. These new particles show a very good Cr(VI) removal efficiency compared with other commercial products available. This good reactivity is related to the absence of an oxide layer, the large amount of superficial irregularities generated by the repetitive fracture process during milling and the presence of a fine nanostructure within the iron nanoparticles.

Expression of APP pathway mRNAs and proteins in Alzheimer's disease.

PubMed

Matsui, Toshifumi; Ingelsson, Martin; Fukumoto, Hiroaki; Ramasamy, Karunya; Kowa, Hisatomo; Frosch, Matthew P; Irizarry, Michael C; Hyman, Bradley T

2007-08-03

In both trisomy 21 and rare cases of triplication of amyloid precursor protein (APP) Alzheimer's disease (AD) pathological changes are believed to be secondary to increased expression of APP. We hypothesized that sporadic AD may also be associated with changes in transcription of APP or its metabolic partners. To address this issue, temporal neocortex of 27 AD and 21 non-demented control brains was examined to assess mRNA levels of APP isoforms (total APP, APP containing the Kunitz protease inhibitor domain [APP-KPI] and APP770) and APP metabolic enzymatic partners (the APP cleaving enzymes beta-secretase [BACE] and presenilin-1 [PS-1], and putative clearance molecules, low-density lipoprotein receptor protein [LRP] and apolipoprotein E [apoE]). Furthermore, we evaluated how changes in APP at the mRNA level affect the amount of Tris buffer extractable APP protein and Abeta40 and 42 peptides in AD and control brains. As assessed by quantitative PCR, APP-KPI (p=0.007), APP770 (p=0.004), PS-1 (p=0.004), LRP (p=0.003), apoE (p=0.0002) and GFAP (p<0.0001) mRNA levels all increased in AD, and there was a shift from APP695 (a neuronal isoform) towards KPI containing isoforms that are present in glia as well. APP-KPI mRNA levels correlated with soluble APPalpha-KPI protein (sAPPalpha-KPI) levels measured by ELISA (tau=0.33, p=0.015 by Kendall's rank correlation); in turn, soluble APPalpha-KPI protein levels positively correlated with Tris-extractable, soluble Abeta40 (p=0.046) and 42 levels (p=0.007). The ratio of soluble APPalpha-KPI protein levels to total APP protein increased in AD, and also correlated with GFAP protein levels in AD. These results suggest that altered transcription of APP in AD is proportionately associated with Abeta peptide, may occur in the context of gliosis, and may contribute to Abeta deposition in sporadic AD.

Thermal treatment to improve the hydrophobicity of ground CaCO3 particles modified with sodium stearate

NASA Astrophysics Data System (ADS)

Liang, Yong; Yu, Keyi; Zheng, Qinzhong; Xie, Jiuren; Wang, Ting-Jie

2018-04-01

The surface modification of calcium carbonate (CaCO3) particles, which is used as a filler, significantly affects the properties of the composed materials. The effects of thermal treatment on ground calcium carbonate (GCC) particles subjected to hydrophobic modification using sodium stearate (RCOONa) were studied. The contact angle of the modified GCC particles increased from 24.7° to 118.9° when the amount of RCOONa added was increased from 0% to 5% and then decreased to 97.5° when the RCOONa content was further increased to 10%. When a large amount of RCOONa was added, RCOO- reacts with Ca2+ and generates (RCOO)2Ca nuclei, which are adsorbed on the surface of the GCC particles, forming a discontinuous (RCOO)2Ca modified layer. After thermal treatment under sealed conditions, the contact angle of the GCC particles modified using 1.5% RCOONa/GCC increased from 112.8° to 139.6°. The thermal stability of the (RCOO)2Ca modified layer was increased, with the temperature increase of the mass-loss peak from 358.0 to 463.0 °C. It is confirmed that the spreading of melted (RCOO)2Ca nuclei on the surface of the GCC particles during the thermal treatment increased the continuity of the modified layer, converting the physical adsorption of the (RCOO)2Ca nuclei into chemisorption. The grafting density of RCOO- on the GCC particle surface after thermal treatment approximates to 5.00/nm2, which is close to the single-molecular-layer grafting density of RCOO-, indicating that excellent modification was achieved.

Modulation of polymer refractive indices with diamond nanoparticles for metal-free multilayer film mirrors.

PubMed

Ogata, Tomonari; Yagi, Ryohei; Nakamura, Nozomi; Kuwahara, Yutaka; Kurihara, Seiji

2012-08-01

Modulation of the refractive index of a polymer was achieved by combining it with diamond nanoparticles (NDs). The increase in the refractive index was controlled by the amount of NDs added, according to the Lorentz-Lorenz equation. The refractive index of poly(vinyl alcohol) (PVA), which was used as the base polymer, increased from 1.52 to 1.88. A multilayer film consisting of alternating layers of ND-PVA composite and poly(methyl methacrylate) exhibited ca. 80% reflectance with 10 bilayers.

Application of Ferulic Acid for Alzheimer’s Disease: Combination of Text Mining and Experimental Validation

PubMed Central

Meng, Guilin; Meng, Xiulin; Ma, Xiaoye; Zhang, Gengping; Hu, Xiaolin; Jin, Aiping; Liu, Xueyuan

2018-01-01

Alzheimer’s disease (AD) is an increasing concern in human health. Despite significant research, highly effective drugs to treat AD are lacking. The present study describes the text mining process to identify drug candidates from a traditional Chinese medicine (TCM) database, along with associated protein target mechanisms. We carried out text mining to identify literatures that referenced both AD and TCM and focused on identifying compounds and protein targets of interest. After targeting one potential TCM candidate, corresponding protein-protein interaction (PPI) networks were assembled in STRING to decipher the most possible mechanism of action. This was followed by validation using Western blot and co-immunoprecipitation in an AD cell model. The text mining strategy using a vast amount of AD-related literature and the TCM database identified curcumin, whose major component was ferulic acid (FA). This was used as a key candidate compound for further study. Using the top calculated interaction score in STRING, BACE1 and MMP2 were implicated in the activity of FA in AD. Exposure of SHSY5Y-APP cells to FA resulted in the decrease in expression levels of BACE-1 and APP, while the expression of MMP-2 and MMP-9 increased in a dose-dependent manner. This suggests that FA induced BACE1 and MMP2 pathways maybe novel potential mechanisms involved in AD. The text mining of literature and TCM database related to AD suggested FA as a promising TCM ingredient for the treatment of AD. Potential mechanisms interconnected and integrated with Aβ aggregation inhibition and extracellular matrix remodeling underlying the activity of FA were identified using in vitro studies. PMID:29896095

Application of Ferulic Acid for Alzheimer's Disease: Combination of Text Mining and Experimental Validation.

PubMed

Meng, Guilin; Meng, Xiulin; Ma, Xiaoye; Zhang, Gengping; Hu, Xiaolin; Jin, Aiping; Zhao, Yanxin; Liu, Xueyuan

2018-01-01

Alzheimer's disease (AD) is an increasing concern in human health. Despite significant research, highly effective drugs to treat AD are lacking. The present study describes the text mining process to identify drug candidates from a traditional Chinese medicine (TCM) database, along with associated protein target mechanisms. We carried out text mining to identify literatures that referenced both AD and TCM and focused on identifying compounds and protein targets of interest. After targeting one potential TCM candidate, corresponding protein-protein interaction (PPI) networks were assembled in STRING to decipher the most possible mechanism of action. This was followed by validation using Western blot and co-immunoprecipitation in an AD cell model. The text mining strategy using a vast amount of AD-related literature and the TCM database identified curcumin, whose major component was ferulic acid (FA). This was used as a key candidate compound for further study. Using the top calculated interaction score in STRING, BACE1 and MMP2 were implicated in the activity of FA in AD. Exposure of SHSY5Y-APP cells to FA resulted in the decrease in expression levels of BACE-1 and APP, while the expression of MMP-2 and MMP-9 increased in a dose-dependent manner. This suggests that FA induced BACE1 and MMP2 pathways maybe novel potential mechanisms involved in AD. The text mining of literature and TCM database related to AD suggested FA as a promising TCM ingredient for the treatment of AD. Potential mechanisms interconnected and integrated with Aβ aggregation inhibition and extracellular matrix remodeling underlying the activity of FA were identified using in vitro studies.

Method for improving dissolution efficiency in gas-absorption and liquid extraction processes. [Patent application

DOEpatents

Kanak, B.E.; Stephenson, M.J.

1980-01-11

A method is described for improving dissolution efficiency in processes in which a feed fluid is introduced to a zone where it is contacted with a liquid solvent for preferentially removing a component of the feed and where part of the solvent so contacted undergoes transfer into the feed fluid to saturate the same. It has been found that such transfer significantly impairs dissolution efficiency. In accordance with the invention, an amount of the above-mentioned solvent is added to the feed fluid being introduced to the contact zone, the solvent being added in an amount sufficient to effect reduction or elimination of the above-mentioned transfer. Preferably, the solvent is added to the feed fluid in an amount saturating or supersaturating the feed fluid under the conditions prevailing in the contact zone.

Method for improving dissolution efficiency in gas-absorption and liquid extraction processes

DOEpatents

Kanak, Brant E.; Stephenson, Michael J.

1981-01-01

This invention is a method for improving dissolution efficiency in processes in which a feed fluid is introduced to a zone where it is contacted with a liquid solvent for preferentially removing a component of the feed and where part of the solvent so contacted undergoes transfer into the feed fluid to saturate the same. It has been found that such transfer significantly impairs dissolution efficiency. In accordance with the invention, an amount of the above-mentioned solvent is added to the feed fluid being introduced to the contact zone, the solvent being added in an amount sufficient to effect reduction or elimination of the above-mentioned transfer. Preferably, the solvent is added to the feed fluid in an amount saturating or supersaturating the feed fluid under the conditions prevailing in the contact zone.

Effect of Ca(OH)2 on Oxidation and Ignition Resistances of Pure Mg

NASA Astrophysics Data System (ADS)

Jang, Dong-In; Kim, Shae K.

CaO added Eco-Mg alloy has the potential to maximize the environmental benefits provided by lightweight, unlimited, and recyclable Mg alloy by eliminating global warming SF6 or other protective gases as well as Be addition. It is possible to ensure the safety during manufacturing and application, especially without sacrificing process abilities and mechanical properties and increasing the cost of Mg alloy. However, the one limitation of CaO is prone to moisture absorption during storage. Instead of CaO, it is attempted to use Ca(OH)2, which does not absorb moisture during storage, for Eco-Mg alloy. This paper discusses the effect of Ca(OH)2 on oxidation and ignition resistances of pure Mg and to compare the results with them of CaO addition. The purpose of this study is to investigate effects of CaO and Ca(OH)2 on pure Mg through micro structure observation, ignition test and phase analysis. With increasing Ca(OH)2 content, the hardness of Ca(OH)2 added Mg alloy increased by grain refinement. From oxidation test by TGA, the oxidation behavior of Ca(OH)2 added Mg was comparable to that of CaO added Mg alloy for the previous study. Consequently, it seems that reduction of fluidity and mold adhesion could be minimized by adding small amount of Ca(OH)2 which is cheap and easy to be handled due to its stability in application for Eco-Mg alloy.

Human Cortical Neural Stem Cells Expressing Insulin-Like Growth Factor-I: A Novel Cellular Therapy for Alzheimer’s Disease

PubMed Central

McGinley, Lisa M.; Sims, Erika; Lunn, J. Simon; Kashlan, Osama N.; Chen, Kevin S.; Bruno, Elizabeth S.; Pacut, Crystal M.; Hazel, Tom; Johe, Karl; Sakowski, Stacey A.

2016-01-01

Alzheimer’s disease (AD) is the most prevalent age-related neurodegenerative disorder and a leading cause of dementia. Current treatment fails to modify underlying disease pathologies and very little progress has been made to develop effective drug treatments. Cellular therapies impact disease by multiple mechanisms, providing increased efficacy compared with traditional single-target approaches. In amyotrophic lateral sclerosis, we have shown that transplanted spinal neural stem cells (NSCs) integrate into the spinal cord, form synapses with the host, improve inflammation, and reduce disease-associated pathologies. Our current goal is to develop a similar “best in class” cellular therapy for AD. Here, we characterize a novel human cortex-derived NSC line modified to express insulin-like growth factor-I (IGF-I), HK532-IGF-I. Because IGF-I promotes neurogenesis and synaptogenesis in vivo, this enhanced NSC line offers additional environmental enrichment, enhanced neuroprotection, and a multifaceted approach to treating complex AD pathologies. We show that autocrine IGF-I production does not impact the cell secretome or normal cellular functions, including proliferation, migration, or maintenance of progenitor status. However, HK532-IGF-I cells preferentially differentiate into gamma-aminobutyric acid-ergic neurons, a subtype dysregulated in AD; produce increased vascular endothelial growth factor levels; and display an increased neuroprotective capacity in vitro. We also demonstrate that HK532-IGF-I cells survive peri-hippocampal transplantation in a murine AD model and exhibit long-term persistence in targeted brain areas. In conclusion, we believe that harnessing the benefits of cellular and IGF-I therapies together will provide the optimal therapeutic benefit to patients, and our findings support further preclinical development of HK532-IGF-I cells into a disease-modifying intervention for AD. Significance There is no cure for Alzheimer’s disease (AD) and no means of prevention. Current drug treatments temporarily slow dementia symptoms but ultimately fail to alter disease course. Given the prevalence of AD and an increasingly aging population, alternative therapeutic strategies are necessary. Cellular therapies impact disease by multiple mechanisms, providing increased efficacy compared with traditional, single-target drug discovery approaches. This study describes a novel enhanced human stem cell line that produces increased amounts of growth factors beneficial to the disease environment. Findings support further development into a potentially safe and clinically translatable cellular therapy for patients with AD. PMID:26744412

Climate and environmental changes during the past millennium in central western Guizhou, China as recorded by Stalagmite ZJD-21

NASA Astrophysics Data System (ADS)

Kuo, Tz-Shing; Liu, Zi-Qi; Li, Hong-Chun; Wan, Nai-Jung; Shen, Chuan-Chou; Ku, Teh-Lung

2011-04-01

Stalagmite ZJD-21 (12.3-cm long) was collected from Zhijin Cave in Zhijin County, Guizhou, China. Its 210Pb profile and seven 230Th/ 234U dates indicate that the stalagmite has grown continuously for the past 1100 years. The δ18O record of ZJD-21 indicates that δ18O in the stalagmite was mainly influenced by rainfall amount and/or summer/winter rain ratio, with lighter values corresponding to wetter climatic conditions and/or more summer monsoonal rains. The ZJD-21 δ18O record suggests: (1) dry/warm climates during AD 950-1100 (overlapping with most of the Medieval Warm Period, MWP, in Europe); (2) strengthening of the summer monsoon from the MWP toward the beginning of the Little Ice Age (LIA) at AD 1250; (3) relatively wet/cold conditions occurred between AD 1250 and 1500, shown by relatively light δ18O values; (4) the summer monsoon intensity strongly declined referred by the increase δ18O trend from AD 1500 to AD 1600, perhaps resulting in dry/cold conditions; and (5) a strongly enhancement of the summer monsoon intensity appeared from AD 1700 to 1950, reflecting wet/cold conditions during the late period of the LIA. On decadal scales the monsoonal climate of central western Guizhou can be either warm/wet and cold/dry, or warm/dry and cold/wet. The δ13C variations in ZJD-21 on decadal-to-centennial scales respond mainly to vegetation changes with heavier values reflecting lesser amount of forest coverage. Prior to AD 1700, the δ13C generally co-varied with δ18O reflecting the expected more extensive vegetation growth (lighter δ13C) under wetter climate (lighter δ18O). However, during the past 300 years the δ13C increased sharply showing an opposite trend to that of δ18O. This observation strongly suggests that a decline of surface vegetation due to an artificial deforestation might have occurred - an occurrence coincident with the large-scale immigration into central western Guizhou in connection with copper-mining activities during the reign of Emperor Yongzheng of Qing Dynasty. Since the late 1890s, especially in the past 50 years, population surge has led to serious karst rocky desertification in the area.

Effect of increasing amounts of milk replacer powder added to whole milk on postweaning performance, reproduction, glucose metabolism, and mammary fat pad in dairy heifers.

PubMed

Lage, C F A; Azevedo, R A; Machado, F S; Campos, M M; Pereira, L G R; Tomich, T R; Carvalho, B C; Alves, B R C; Santos, G B; Brandão, F Z; Coelho, S G

2017-11-01

The aim of this study was to evaluate the effects of increasing the total solids (TS) content of liquid feed, by adding increasing amounts of milk replacer powder to whole milk, on age at puberty and postweaning performance, glucose metabolism, and mammary fat pad of dairy heifers. Crossbreed Holstein × Gyr heifers (n = 58) were distributed into 4 different treatments during the preweaning period. Treatments consisted of liquid feeds with TS content of 12.5 (actual TS = 13.5 ± 0.53%; n = 15), 15.0 (actual TS = 16.1 ± 0.03%; n = 15), 17.5 (actual TS = 18.2 ± 0.14%; n = 13), or 20.0% (actual TS = 20.4 ± 0.24%; n = 15), which were provided up to 59 d old. From 60 to 89 d old, the animals received the same starter offered during the preweaning period in addition to corn silage ad libitum starting at 70 d old. From 90 to 104 d old, the animals were adapted to a total mixed ration. At 105 d old, the animals were distributed in 4 paddocks equipped with electronic feed and water bins and were fed the same total mixed ration ad libitum. A period of adaptation to the electronic feed bins occurred from 105 to 119 d old. Feed and water intake and body weight and body frame development were assessed until puberty. Mammary gland evaluations were performed monthly by ultrasonography from 120 d of age until puberty onset. Puberty onset was determined as plasma progesterone concentration greater than 1 ng/mL in 2 consecutive samples collected 7 d apart. The date of puberty onset was recorded as the collection day of the first of these samples. A glucose tolerance test was performed at 280 d of age. The increased TS content of the liquid feed fed during the preweaning period did not affect dry matter intake, performance, age at puberty, glucose metabolism, or mammary gland fat pad at later stages of rearing process. Conversely, hip width and heart girth increased linearly up to 150 and 240 d of age, respectively, as a result of the increased TS concentration of the liquid feed during the preweaning period. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Ability of a mass media campaign to influence knowledge, attitudes, and behaviors about sugary drinks and obesity.

PubMed

Boles, Myde; Adams, Adelle; Gredler, Amy; Manhas, Sonia

2014-10-01

We examined the impact of a mass media campaign that was designed to educate residents about the amount of added sugars in soda and other sugary drinks, as well as the health impacts of consuming such drinks. The campaign was implemented in Multnomah County (Portland), Oregon in 2011 and included paid and unpaid media on the web, television, billboards, and transit. A telephone survey (n=402) measured campaign awareness, attitudes toward obesity, knowledge about health problems of excessive sugar, and behavioral intentions and behaviors around soda and sugary drink consumption. Nearly 80% of people who were aware of the media campaign intended to reduce the amount of soda or sugary drinks they offered to a child as a result of the campaign ads. Those who were aware of the campaign were more likely to agree that too much sugar causes health problems (97.3% vs. 85.9%). There was no significant change in self-reported soda consumption. Media campaigns about sugary drinks and obesity may be effective for raising awareness about added sugars in beverages, increasing knowledge about health problems associated with excessive sugar consumption, and prompting behavioral intentions to reduce soda and sugary drink consumption. Copyright © 2014 Elsevier Inc. All rights reserved.

Role of 11β-OH-C(19) and C(21) steroids in the coupling of 11β-HSD1 and 17β-HSD3 in regulation of testosterone biosynthesis in rat Leydig cells.

PubMed

Latif, Syed A; Shen, Mae; Ge, Ren-Shan; Sottas, Chantal M; Hardy, Matthew P; Morris, David J

2011-06-01

Here we describe further experiments to support our hypothesis that bidirectional 11β-HSD1-dehydrogenase in Leydig cells is a NADP(H) regenerating system. In the absence of androstenedione (AD), substrate for 17β-HSD3, incubation of Leydig cells with corticosterone (B) or several C(19)- and C(21)-11β-OH-steroids, in the presence of [(3)H]-11-dehydro-corticosterone (A), stimulated 11β-HSD1-reductase activity. However, in presence of 30 μM AD, testosterone (Teso) synthesis is stimulated from 4 to 197 picomole/25,000 cells/30 min and concomitantly inhibited 11β-HSD1-reductase activity, due to competition for the common cofactor NADPH needed for both reactions. Testo production was further significantly increased (p<0.05) to 224-267 picomole/25,000 cells/30 min when 10 μM 11β-OH-steroids (in addition to 30 μM AD) were also included. Similar results were obtained in experiments conducted with lower concentrations of AD (5 μM), and B or A (500 nM). Incubations of 0.3-6.0 μM of corticosterone (plus or minus 30 μM AD) were then performed to test the effectiveness of 17β-HSD3 as a possible NADP(+) regenerating system. In the absence of AD, increasing amounts (3-44 pmol/25,000 cells/30 min) of 11-dehydro-corticosterone were produced with increasing concentrations of corticosterone in the medium. When 30 μM AD was included, the rate of 11-dehydro-corticosterone formation dramatically increased 1.3-5-fold producing 4-210 pmol/25,000 cells/30 min of 11-dehydro-corticosterone. We conclude that 11β-HSD1 is enzymatically coupled to 17β-HSD3, utilizing NADPH and NADP in intermeshed regeneration systems. Copyright © 2011 Elsevier Inc. All rights reserved.

Method for increasing subterranean formation permeability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harvey, R.R.

1966-09-06

In a waterflooding operation the water premeability of the reservoir rock may be improved be adding certain chemical compounds to the waterflood. These compounds are selected from a group consisting of quebracho, pyrocatechole and hydroquinone. The amounts of chemicals used are in the ranges of 0.01 to 10 wt % based on floodwater. In one aspect of the method, the reservoir rock is rendered perferentially oil-wet by injecting quebracho tannin with the floodwater in an amount ranging from 0.5 to 5.0 wt % based on floodwater. In this case the floodwater should have a pH range of 7 to 14.more » (6 claims)« less

Altered expression levels of the protein phosphatase 2A ABalphaC enzyme are associated with Alzheimer disease pathology.

PubMed

Sontag, Estelle; Luangpirom, Ampa; Hladik, Christa; Mudrak, Ingrid; Ogris, Egon; Speciale, Samuel; White, Charles L

2004-04-01

The formation of amyloid-containing senile plaques and tau-rich neurofibrillary tangles are central events in Alzheimer disease (AD) pathogenesis. Significantly, ABalphaC, a major protein phosphatase 2A (PP2A) holoenzyme, specifically binds to and dephosphorylates tau. Deregulation of PP2A results in tau hyperphosphorylation in vivo. Here, we compared the expression levels and distribution of PP2A subunits in various brain regions from autopsy cases of AD and aged controls with or without histological evidence of age-related neurofibrillary degeneration. Immunoblotting analyses revealed that there was a significant reduction in the total amounts of ABalphaC in AD frontal and temporal cortices that matched the decrease in PP2A activity measured in the same brain homogenates. Immunohistochemical studies showed that neuronal ABalphaC expression levels were significantly and selectively decreased in AD-affected regions and in tangle-bearing neurons, but not in AD cerebellum and in non-AD dementias. Reduced neuronal ABalphaC immunoreactivity closely correlated with tangle load, but not plaque burden, suggesting that ABalphaC dysfunction contributes to AD tau pathology. Glial cells within senile plaques were also positive for ABalphaC. Increased glial PP2A immunoreactivity was observed in both AD and non-AD cases and may play a role in the brain's response to general inflammatory processes and amyloidogenesis.

Cortical Iron Reflects Severity of Alzheimer’s Disease

PubMed Central

van Duijn, Sara; Bulk, Marjolein; van Duinen, Sjoerd G.; Nabuurs, Rob J.A.; van Buchem, Mark A.; van der Weerd, Louise; Natté, Remco

2017-01-01

Abnormal iron distribution in the isocortex is increasingly recognized as an in vivo marker for Alzheimer’s disease (AD). However, the contribution of iron accumulation to the AD pathology is still poorly understood. In this study, we investigated: 1) frontal cortical iron distribution in AD and normal aging and 2) the relation between iron distribution and degree of AD pathology. We used formalin fixed paraffin embedded frontal cortex from 10 AD patients, 10 elder, 10 middle aged, and 10 young controls and visualized iron with a modified Perl’s histochemical procedure. AD and elderly subjects were not different with respect to age and sex distribution. Iron distribution in the frontal cortex was not affected by normal aging but was clearly different between AD and controls. AD showed accumulation of iron in plaques, activated microglia, and, in the most severe cases, in the mid-cortical layers along myelinated fibers. The degree of altered iron accumulations was correlated to the amount of amyloid-β plaques and tau pathology in the same block, as well as to Braak stage (p < 0.001). AD and normal aging show different iron and myelin distribution in frontal cortex. These changes appear to occur after the development of the AD pathological hallmarks. These findings may help the interpretation of high resolution in vivo MRI and suggest the potential of using changes in iron-based MRI contrast to indirectly determine the degree of AD pathology in the frontal cortex. PMID:29081415

The effects of Yucca shidigera extract on the reduction of ammonia concentration in Lake Koumoundourou

NASA Astrophysics Data System (ADS)

Dimitriou, Elias; Markogianni, Vassiliki; Yu, Xiaoxi

2013-04-01

Increasing concentrations of nutrients in Lakes is a common problem worldwide, nowadays and has significant impacts on their trophic status and thus on the ecosystem's health. Koumoundourou Lake is a shallow, semi-saline Lake, located in the industrial zone of Attica, Greece. The particular water body receives significant pressures from the nearby industries, from uncontrolled disposal of urban waste and from large number of birds that find a shelter there during the winter time (due to the extinction of most of the rest of Attica wetlands). This study investigates the efficiency of a particular restoration measure for the reduction of ammonia by using a plant extract. Particularly, Yucca shidigera has been proved effective in reducing ammonia in aquaculture and therefore, this study aims to investigate if the effects of Yucca extract could be similar in Lake Koumoundourou and determine the appropriate amount of Yucca extract, necessary to restore the water quality at the desirable levels. Six treatments (two replications per treatment) for 180 hours were conducted, in which three different levels of Ammonium chloride (varying between 0 and 6mg/l) and five different concentrations of Yucca (varying between 0 and 2 mg/l) were added in the lake water (in experimental tanks). As far as the effects of Yucca extract on water quality are concerned, it is initially considered that it stimulates the reduction of dissolved oxygen (DO) since its concentration dropped faster in the treatments with added Yucca than the treatments with no Yucca at all, despite the amount of the added Ammonia. Concentration of ammonia-nitrogen kept dropping until hour 48 from the beginning of the experiment, indicating that the efficacy of Yucca extract removing ammonia last for about 48 hours, irrespectively of the amount of yucca extract added. Additionally, the relationship between the added Yucca extract and the removed ammonia concentration is proportional. Thus, it is concluded that the application of Yucca extract can be a promising way to treat lakes with high ammonia levels due to human induced or natural (birds' faeces) pollution.

Effects of Tannic Acid on Lipid and Protein Oxidation, Color, and Volatiles of Raw and Cooked Chicken Breast Meat during Storage

PubMed Central

Al-Hijazeen, Marwan; Lee, Eun Joo; Mendonca, Aubrey; Ahn, Dong Uk

2016-01-01

The objective of this study was to determine the effect of tannic acid (TA) on the oxidative stability and the quality characteristics of ground chicken breast meat. Five treatments including (1) control (none added), (2) 2.5 ppm TA, (3) 5 ppm TA, (4) 10 ppm TA, and (5) 5 ppm butylated hydroxyanisole (BHA) were added to boneless, skinless ground chicken breast meat, and used for both raw and cooked meat studies. For the raw meat study, the ground chicken breast meat was packaged in oxygen-permeable bags and stored at 4 °C for 7 days. For the cooked study, raw ground meat samples were vacuum-packaged in oxygen-impermeable vacuum bags, cooked in-bag to the internal temperature of 75 °C, re-packaged in oxygen-permeable bags, and then stored. Both raw and cooked meats were analyzed for lipid and protein oxidation, color, and volatiles (cooked meat only) at 0, 3, and 7 days of storage. Raw meats with 10 ppm of TA added had significantly (p ≤ 0.05) lower lipid and protein oxidation than other treatments during storage. In addition, TA at 10 ppm level maintained the highest color a*- and L*-values during storage. Cooked chicken breast meat with 5 and 10 ppm TA added produced significantly (p ≤ 0.05) lower amounts of off-odor volatiles than other treatments. Among the volatile compounds, the amount of hexanal increased rapidly during storage for cooked meat. However, meats with 5 and 10 ppm TA added showed the lowest amount of hexanal and other aldehydes related to lipid oxidation, indicating a strong antioxidant effect of TA in cooked chicken breast meat. Furthermore, the differences in aldehydes among the treatments were bigger in cooked than in raw meat, indicating that the antioxidant effect of TA in cooked meat was greater than that in raw meat. Therefore, TA at >5 ppm can be used as a good natural preservative in cooked chicken meat to maintain its quality during storage. PMID:27304971

Dietary heat-killed Lactobacillus brevis SBC8803 promotes voluntary wheel-running and affects sleep rhythms in mice.

PubMed

Miyazaki, Koyomi; Itoh, Nanako; Yamamoto, Saori; Higo-Yamamoto, Sayaka; Nakakita, Yasukazu; Kaneda, Hirotaka; Shigyo, Tatsuro; Oishi, Katsutaka

2014-08-28

We previously reported that heat-killed Lactobacillus brevis SBC8803 enhances appetite via changes in autonomic neurotransmission. Here we assessed whether a diet supplemented with heat-killed SBC8803 affects circadian locomotor rhythmicity and sleep architecture. Daily total activity gradually increased in mice over 4 weeks and supplementation with heat-killed SBC8803 significantly intensified the increase, which reached saturation at 25 days. Electroencephalography revealed that SBC8803 supplementation significantly reduced the total amount of time spent in non-rapid eye movement (NREM) sleep and increased the amount of time spent being awake during the latter half of the nighttime, but tended to increase the total amount of time spent in NREM sleep during the daytime. Dietary supplementation with SBC8803 can extend the duration of activity during the nighttime and of sleep during the daytime. Daily voluntary wheel-running and sleep rhythmicity become intensified when heat-killed SBC8803 is added to the diet. Dietary heat-killed SBC8803 can modulate circadian locomotion and sleep rhythms, which might benefit individuals with circadian rhythms that have been disrupted by stress or ageing. Copyright © 2014 Elsevier Inc. All rights reserved.

Intracellular activation of the fibrinolytic cascade in the Quebec Platelet Disorder.

PubMed

Sheth, Prameet M; Kahr, Walter H A; Haq, M Anwar; Veljkovic, Dragoslava Kika; Rivard, Georges E; Hayward, Catherine P M

2003-08-01

The Quebec Platelet Disorder (QPD) is an unusual bleeding disorder associated with increased platelet stores of urokinase-type plasminogen activator (u-PA) and proteolysis of platelet alpha-granule proteins. The increased u-PA and proteolyzed plasminogen in QPD platelets led us to investigate possible contributions of intracellular plasmin generation to QPD alpha-granule proteolysis. ELISA indicated there were normal amounts of plasminogen and plasmin-alpha(2)-antiplasmin (PAP) complexes in QPD plasmas. Like normal platelets, QPD platelets contained only a small proportion of the blood plasminogen, however, they contained an increased amount of PAP complexes compared to normal platelets (P < 0.005). The quantities of plasminogen stored in platelets were important to induce QPD-like proteolysis of normal alpha-granule proteins by two chain u-PA (tcu-PA) in vitro. Moreover, adding supplemental plasminogen to QPD, but not to control, platelet lysates, triggered further alpha-granule protein proteolysis to forms that comigrated with plasmin degraded proteins. These data suggest the generation of increased but limiting amounts of plasmin within platelets is involved in producing the unique phenotypic changes to alpha-granule proteins in QPD platelets. The QPD is the only known bleeding disorder associated with chronic, intracellular activation of the fibrinolytic cascade.

The Acyl Desaturase CER17 Is Involved in Producing Wax Unsaturated Primary Alcohols and Cutin Monomers1[OPEN

PubMed Central

Yang, Xianpeng; Zhao, Huayan; Kosma, Dylan K.; Dyer, John M.; Li, Rongjun; Liu, Xiulin; Wang, Zhouya; Jenks, Matthew A.

2017-01-01

We report n-6 monounsaturated primary alcohols (C26:1, C28:1, and C30:1 homologs) in the cuticular waxes of Arabidopsis (Arabidopsis thaliana) inflorescence stem, a class of wax not previously reported in Arabidopsis. The Arabidopsis cer17 mutant was completely deficient in these monounsaturated alcohols, and CER17 was found to encode a predicted ACYL-COENZYME A DESATURASE LIKE4 (ADS4). Studies of the Arabidopsis cer4 mutant and yeast variously expressing CER4 (a predicted fatty acyl-CoA reductase) with CER17/ADS4, demonstrated CER4’s principal role in synthesis of these monounsaturated alcohols. Besides unsaturated alcohol deficiency, cer17 mutants exhibited a thickened and irregular cuticle ultrastructure and increased amounts of cutin monomers. Although unsaturated alcohols were absent throughout the cer17 stem, the mutation’s effects on cutin monomers and cuticle ultrastructure were much more severe in distal than basal stems, consistent with observations that the CER17/ADS4 transcript was much more abundant in distal than basal stems. Furthermore, distal but not basal stems of a double mutant deficient for both CER17/ADS4 and LONG-CHAIN ACYL-COA SYNTHETASE1 produced even more cutin monomers and a thicker and more disorganized cuticle ultrastructure and higher cuticle permeability than observed for wild type or either mutant parent, indicating a dramatic genetic interaction on conversion of very long chain acyl-CoA precursors. These results provide evidence that CER17/ADS4 performs n-6 desaturation of very long chain acyl-CoAs in both distal and basal stems and has a major function associated with governing cutin monomer amounts primarily in the distal segments of the inflorescence stem. PMID:28069670

Dairy Food Consumption and Meal-Induced Cortisol Response Interacted to Influence Weight Loss in Overweight Women Undergoing a 12-Week, Meal-Controlled, Weight Loss Intervention1234

PubMed Central

Witbracht, Megan G.; Van Loan, Marta; Adams, Sean H.; Keim, Nancy L.; Laugero, Kevin D.

2013-01-01

Dairy food enhances weight loss in animal models, possibly by modifying the metabolic effects of cortisol. This study determined in overweight women (ages 20.0–45.9 y; n = 51) whether including dairy food in an energy-restricted diet affects cortisol concentrations and whether differences in provoked cortisol explain the magnitude of weight loss. Women received either an adequate amount of dairy food (AD), the equivalent of ≥711 mL/d milk, or a low amount of dairy food (LD), the equivalent to ≤238 mL/d milk, in a 12-wk, energy-restricted dietary intervention. Participants were tested in a 12-h laboratory visit, which included 2 standard meals and a dinner buffet that was consumed ad libitum. Salivary cortisol was measured from waking to bedtime. Energy restriction increased (P ≤ 0.04) the minimum and decreased (P ≤ 0.02) the diurnal amplitude in the salivary cortisol concentration from baseline to postintervention. Energy restriction enhanced the dinner meal–stimulated salivary cortisol response (DMR) (P ≤ 0.02) but only in the LD group. Compared with the LD treatment, the AD treatment induced (P ≤ 0.04) greater reductions in body weight and fat, but only in women characterized as having a baseline DMR (responders) (n = 26); weight and fat lost in the AD and LD groups were similar in nonresponders (n = 25). Overall, energy restriction dampened diurnal salivary cortisol fluctuations [symptomatic of hypothalamic-pituitary-adrenal (HPA) axis dysfunction] and enhanced dinner meal–stimulated salivary cortisol concentrations. The AD treatment prevented the latter. Furthermore, certain phenotypic markers of HPA axis function may help to expose the weight-reducing effects of consuming dairy food. PMID:23190756

The Acyl Desaturase CER17 Is Involved in Producing Wax Unsaturated Primary Alcohols and Cutin Monomers.

PubMed

Yang, Xianpeng; Zhao, Huayan; Kosma, Dylan K; Tomasi, Pernell; Dyer, John M; Li, Rongjun; Liu, Xiulin; Wang, Zhouya; Parsons, Eugene P; Jenks, Matthew A; Lü, Shiyou

2017-02-01

We report n-6 monounsaturated primary alcohols (C 26:1 , C 28:1 , and C 30:1 homologs) in the cuticular waxes of Arabidopsis (Arabidopsis thaliana) inflorescence stem, a class of wax not previously reported in Arabidopsis. The Arabidopsis cer17 mutant was completely deficient in these monounsaturated alcohols, and CER17 was found to encode a predicted ACYL-COENZYME A DESATURASE LIKE4 (ADS4). Studies of the Arabidopsis cer4 mutant and yeast variously expressing CER4 (a predicted fatty acyl-CoA reductase) with CER17/ADS4, demonstrated CER4's principal role in synthesis of these monounsaturated alcohols. Besides unsaturated alcohol deficiency, cer17 mutants exhibited a thickened and irregular cuticle ultrastructure and increased amounts of cutin monomers. Although unsaturated alcohols were absent throughout the cer17 stem, the mutation's effects on cutin monomers and cuticle ultrastructure were much more severe in distal than basal stems, consistent with observations that the CER17/ADS4 transcript was much more abundant in distal than basal stems. Furthermore, distal but not basal stems of a double mutant deficient for both CER17/ADS4 and LONG-CHAIN ACYL-COA SYNTHETASE1 produced even more cutin monomers and a thicker and more disorganized cuticle ultrastructure and higher cuticle permeability than observed for wild type or either mutant parent, indicating a dramatic genetic interaction on conversion of very long chain acyl-CoA precursors. These results provide evidence that CER17/ADS4 performs n-6 desaturation of very long chain acyl-CoAs in both distal and basal stems and has a major function associated with governing cutin monomer amounts primarily in the distal segments of the inflorescence stem. © 2017 American Society of Plant Biologists. All Rights Reserved.

Lipopolysaccharide induces proliferation and osteogenic differentiation of adipose-derived mesenchymal stromal cells in vitro via TLR4 activation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herzmann, Nicole; Salamon, Achim; Fiedler, Tomas

Multipotent mesenchymal stromal cells (MSC) are capable of multi-lineage differentiation and support regenerative processes. In bacterial infections, resident MSC can come intocontact with and need to react to bacterial components. Lipopolysaccharide (LPS), a typical structure of Gram-negative bacteria, increases the proliferation and osteogenic differentiation of MSC. LPS is usually recognized by the toll-like receptor (TLR) 4 and induces pro-inflammatory reactions in numerous cell types. In this study, we quantified the protein expression of TLR4 and CD14 on adipose-derived MSC (adMSC) in osteogenic differentiation and investigated the effect of TLR4 activation by LPS on NF-κB activation, proliferation and osteogenic differentiation ofmore » adMSC. We found that TLR4 is expressed on adMSC whereas CD14 is not, and that osteogenic differentiation induced an increase of the amount of TLR4 protein whereas LPS stimulation did not. Moreover, we could show that NF-κB activation via TLR4 occurs upon LPS treatment. Furthermore, we were able to show that competitive inhibition of TLR4 completely abolished the stimulatory effect of LPS on the proliferation and osteogenic differentiation of adMSC. In addition, the inhibition of TLR4 leads to the complete absence of osteogenic differentiation of adMSC, even when osteogenically stimulated. Thus, we conclude that LPS induces proliferation and osteogenic differentiation of adMSC in vitro through the activation of TLR4 and that the TLR4 receptor seems to play a role during osteogenic differentiation of adMSC.« less

Study on Microstructure and Mechanical Properties of Hypereutectic Al–18Si Alloy Modified with Al–3B

PubMed Central

Gong, Chunjie; Tu, Hao; Wu, Changjun; Su, Xuping

2018-01-01

An hypereutectic Al–18Si alloy was modified via an Al–3B master alloy. The effect of the added Al–3B and the modification temperature on the microstructure, tensile fracture morphologies, and mechanical properties of the alloy were investigated using an optical microscope, Image–Pro Plus 6.0, a scanning electron microscope, and a universal testing machine. The results show that the size of the primary Si and its fraction decreased at first, and then increased as an additional amount of Al–3B was added. When the added Al–3B reached 0.2 wt %, the fraction of the primary Si in the Al–18Si alloy decreased with an increase in temperature. Compared with the unmodified Al–18Si alloy, the tensile strength and elongation of the alloy modified at 850 °C with 0.2 wt % Al–3B increased by 25% and 81%, respectively. The tensile fracture of the modified Al–18Si alloy exhibited partial ductile fracture characteristics, but there were more areas with ductile characteristics compared with that of the unmodified Al–18Si alloy. PMID:29558442

Study on Microstructure and Mechanical Properties of Hypereutectic Al-18Si Alloy Modified with Al-3B.

PubMed

Gong, Chunjie; Tu, Hao; Wu, Changjun; Wang, Jianhua; Su, Xuping

2018-03-20

An hypereutectic Al-18Si alloy was modified via an Al-3B master alloy. The effect of the added Al-3B and the modification temperature on the microstructure, tensile fracture morphologies, and mechanical properties of the alloy were investigated using an optical microscope, Image-Pro Plus 6.0, a scanning electron microscope, and a universal testing machine. The results show that the size of the primary Si and its fraction decreased at first, and then increased as an additional amount of Al-3B was added. When the added Al-3B reached 0.2 wt %, the fraction of the primary Si in the Al-18Si alloy decreased with an increase in temperature. Compared with the unmodified Al-18Si alloy, the tensile strength and elongation of the alloy modified at 850 °C with 0.2 wt % Al-3B increased by 25% and 81%, respectively. The tensile fracture of the modified Al-18Si alloy exhibited partial ductile fracture characteristics, but there were more areas with ductile characteristics compared with that of the unmodified Al-18Si alloy.

Mechanisms of deterioration of intermediate moisture food systems

NASA Technical Reports Server (NTRS)

Labuza, T. P.

1972-01-01

A study of shelf stability in intermediate moisture foods was made. Major efforts were made to control lipid oxidation and nonenzymatic browning. In order to determine means of preventing these reactions, model systems were developed having the same water activity content relationship of intermediate moisture foods. Models were based on a cellulose-lipid and protein-lipid system with glycerol added as the humectant. Experiments with both systems indicate that lipid oxidation is promoted significantly in the intermediate moisture range. The effect appeared to be related to increased mobility of either reactants or catalysts, since when the amount of water in the system reached a level where capillary condensation occurred and thus free water was present, the rates of oxidation increased. With added glycerol, which is water soluble and thus increases the amount of mobile phase, the increase in oxidation rate occurs at a lower relative humidity. The rates of oxidation were maximized at 61% RH and decreased again at 75% RH probably due to dilution. No significant non-enzymatic browning occurred in the protein-lipid systems. Prevention of oxidation by the use of metal chelating agents was enhanced in the cellulose system, whereas, with protein present, the lipid soluble chain terminating antioxidants (such as BHA) worked equally as well. Preliminary studies of foods adjusted to the intermediate moisture range bear out the results of oxidation in model systems. It can be concluded that for most fat containing intermediate moisture foods, rancidity will be the reaction most limiting stability.

Effects of age and amyloid deposition on Aβ dynamics in the human central nervous system.

PubMed

Huang, Yafei; Potter, Rachel; Sigurdson, Wendy; Santacruz, Anna; Shih, Shirley; Ju, Yo-El; Kasten, Tom; Morris, John C; Mintun, Mark; Duntley, Stephen; Bateman, Randall J

2012-01-01

The amyloid hypothesis predicts that increased production or decreased clearance of β-amyloid (Aβ) leads to amyloidosis, which ultimately culminates in Alzheimer disease (AD). To investigate whether dynamic changes in Aβ levels in the human central nervous system may be altered by aging or by the pathology of AD and thus contribute to the risk of AD. Repeated-measures case-control study. Washington University School of Medicine in St Louis, Missouri. Participants with amyloid deposition, participants without amyloid deposition, and younger normal control participants. In this study, hourly cerebrospinal fluid (CSF) Aβ concentrations were compared with age, status of amyloid deposition, electroencephalography, and video recording data. Linear increases were observed over time in the Aβ levels in CSF samples obtained from the younger normal control participants and the older participants without amyloid deposition, but not from the older participants with amyloid deposition. Significant circadian patterns were observed in the Aβ levels in CSF samples obtained from the younger control participants; however, circadian amplitudes decreased in both older participants without amyloid deposition and older participants with amyloid deposition. Aβ diurnal concentrations were correlated with the amount of sleep but not with the various activities that the participants participated in while awake. A reduction in the linear increase in the Aβ levels in CSF samples that is associated with amyloid deposition and a decreased CSF Aβ diurnal pattern associated with increasing age disrupt the normal physiology of Aβ dynamics and may contribute to AD.

Egg Shell and Oyster Shell Powder as Alternatives for Synthetic Phosphate: Effects on the Quality of Cooked Ground Pork Products

PubMed Central

2017-01-01

This study aimed to determine the optimal ratio of natural calcium powders (oyster shell and egg shell calcium) as synthetic phosphate replacers in pork products. Ground pork samples were subjected to six treatments, as follows: control (−) (no phosphate added), control (+) (0.3% phosphate blend added), treatment 1 (0.5% oyster shell calcium powder added), treatment 2 (0.3% oyster shell calcium powder and 0.2% egg shell calcium powder added), treatment 3 (0.2% oyster shell calcium powder and 0.3% egg shell calcium powder added), and treatment 4 (0.5% egg shell calcium powder added). The addition of natural calcium powders resulted in an increase in the pH values of meat products, regardless of whether they were used individually or mixed. The highest cooking loss was observed (p<0.05) in the negative control samples, whereas the cooking loss in samples with natural calcium powder added was similar (p>0.05) to that in the positive control samples. CIE L* values decreased as the amount of added egg shell calcium powder increased. CIE a* values were higher (p<0.05) in samples containing natural calcium powder (treatments 1, 2, 3, and 4) than in the positive control. The combination of oyster shell calcium powder and egg shell powder (treatment 2 or 3) was effective for the improvement of textural properties of the pork products. The findings show that the combined use of 0.2% oyster shell calcium and 0.3% egg shell calcium should enable the replacement of synthetic phosphate in the production of cooked pork products with desirable qualities. PMID:28943770

Egg Shell and Oyster Shell Powder as Alternatives for Synthetic Phosphate: Effects on the Quality of Cooked Ground Pork Products.

PubMed

Cho, Min Guk; Bae, Su Min; Jeong, Jong Youn

2017-01-01

This study aimed to determine the optimal ratio of natural calcium powders (oyster shell and egg shell calcium) as synthetic phosphate replacers in pork products. Ground pork samples were subjected to six treatments, as follows: control (-) (no phosphate added), control (+) (0.3% phosphate blend added), treatment 1 (0.5% oyster shell calcium powder added), treatment 2 (0.3% oyster shell calcium powder and 0.2% egg shell calcium powder added), treatment 3 (0.2% oyster shell calcium powder and 0.3% egg shell calcium powder added), and treatment 4 (0.5% egg shell calcium powder added). The addition of natural calcium powders resulted in an increase in the pH values of meat products, regardless of whether they were used individually or mixed. The highest cooking loss was observed ( p <0.05) in the negative control samples, whereas the cooking loss in samples with natural calcium powder added was similar ( p >0.05) to that in the positive control samples. CIE L* values decreased as the amount of added egg shell calcium powder increased. CIE a* values were higher ( p <0.05) in samples containing natural calcium powder (treatments 1, 2, 3, and 4) than in the positive control. The combination of oyster shell calcium powder and egg shell powder (treatment 2 or 3) was effective for the improvement of textural properties of the pork products. The findings show that the combined use of 0.2% oyster shell calcium and 0.3% egg shell calcium should enable the replacement of synthetic phosphate in the production of cooked pork products with desirable qualities.

Just a Spoonful of Sugar Will Land You Six Feet Underground: Should the Food and Drug Administration Revoke Added Sugar's GRAS Status?

PubMed

Card, Melissa Marie; Abela, John Francis

2015-01-01

This article assesses whether added sugar meets FDA's standard to be generally recognized as safe ("GRAS"). If added sugar is not GRAS, then manufacturers are subject to premarket approval prior to using added sugar in their products. This article advocates that FDA should issue a Federal Register notice determining that added sugar is not GRAS, allowing FDA to regulate the amount of added sugar used in processed foods, decreasing the health adversities that stem from added sugar consumption.

Contributions of nanodiamond abrasives and deionized water in magnetorheological finishing of aluminum oxynitriden

NASA Astrophysics Data System (ADS)

Miao, Chunlin; Lambropoulos, John C.; Romanofsky, Henry; Shafrir, Shai N.; Jacobs, Stephen D.

2009-08-01

Magnetorheological finishing (MRF) is a sub-aperture deterministic process for fabricating high-precision optics by removing material and smoothing the surface. The goal of this work is to study the relative contribution of nanodiamonds and water in material removal for MRF of aluminum oxynitride ceramic (ALON) based upon a nonaqueous magnetorheological (MR) fluid. Removal was enhanced by a high carbonyl iron concentration and the addition of nanodiamond abrasives. Small amounts of deionized (DI) water were introduced into the nonaqueous MR fluid to further influence the material removal process. Material removal data were collected with a spot-taking machine. Drag force (Fd) and normal force (Fn) before and after adding nanodiamonds or DI water were measured with a dual load cell. Both drag force and normal force were insensitive to the addition of nanodiamonds but increased with DI water content in the nonaqueous MR fluid. Shear stress (i.e., drag force divided by spot area) was calculated, and examined as a function of nanodiamond concentration and DI water concentration. Volumetric removal rate increased with increasing shear stress, which was shown to be a result of increasing viscosity after adding nanodiamonds and DI water. This work demonstrates that removal rate for a hard ceramic with MRF can be enhanced by adding DI water into a nonaqueous MR fluid.

Factors Which Affect the Amount of Inorganic Phosphate, Phosphorylcholine, and Phosphorylethanolamine in Xylem Exudate of Tomato Plants 1

PubMed Central

Martin, Barry A.; Tolbert, N. E.

1983-01-01

Phosphate in the xylem exudate of tomato (Lycopersicon esculentum) plants was 70 to 98% inorganic phosphate (Pi), 2 to 30% P-choline, and less than 1% P-ethanolamine. Upon adding 32Pi to the nutrient, Pi in xylem exudate had the same specific activity within 4 hours. P-choline and P-ethanolamine reached the same specific activity only after 96 hours. The amount of Pi in xylem exudate was dependent on Pi concentration in the nutrient and decreased from 1700 to 170 micromolar when Pi in the nutrient decreased from 50 to 2 micromolar. The flux of 0.4 nmoles organic phosphate per minute per gram fresh weight root into the xylem exudate was not affected by the Pi concentration in the nutrient solution unless it was below 1 micromolar. During 7 days of Pi starvation, Pi in the xylem exudate decreased from 1400 to 130 micromolar while concentrations of the two phosphate esters remained unchanged. The concentration of phosphate esters in the xylem exudate was increased by addition of choline or ethanolamine to the nutrient solution, but Pi remained unchanged. Upon adding [14C]choline to the nutrient, 10 times more [14C]P-choline than [14C]choline was in the xylem exudate and 85 to 90% of the ester phosphate was P-choline. When [14C]ethanolamine was added, [14C]P-ethanolamine and [14C]ethanolamine in the xylem sap were equal in amount. P-choline and P-ethanolamine accumulated in leaves of whole plants at the same time and the same proportion as observed for their flux into the xylem exudate. No relationship between the transport of P-choline and Pi in the xylem was established. Rather, the amount of choline in xylem exudate and its incorporation into phosphatidylcholine in the leaf suggest that the root is a site of synthesis of P-choline and P-ethanolamine for phospholipid synthesis in tomato leaves. PMID:16663240

Validation of methodology for determination of the mercury methylation potential in sediments using radiotracers.

PubMed

Zizek, Suzana; Ribeiro Guevara, Sergio; Horvat, Milena

2008-04-01

Experiments to determine the mercury methylation potential were performed on sediments from two locations on the river Idrijca (Slovenia), differing in ambient mercury concentrations. The tracer used was the radioactive isotope (197)Hg. The benefit of using this tracer is its high specific activity, which enables spikes as low as 0.02 ng Hg(2+) g(-1) of sample to be used. It was therefore possible to compare the efficiency of the methylation potential experiments over a range of spike concentrations from picogram to microgram levels. The first part of the work aimed to validate the experimental blanks and the second part consisted of several series of incubation experiments on two different river sediments using a range of tracer additions. The results showed high variability in the obtained methylation potentials. Increasing Hg(2+) additions gave a decrease in the percentage of the tracer methylated during incubation; in absolute terms, the spikes that spanned four orders of magnitude (0.019-190 pg g(-1) of sediment slurry) resulted in MeHg formation between 0.01 and 0.1 ng MeHg g(-1) in Podroteja and Kozarska Grapa. Higher spikes resulted in slightly elevated MeHg production (up to a maximum of 0.27 ng g(-1)). The values of methylation potential were similar in both sediments. The results imply that the experimental determination of mercury methylation potential strongly depends on the experimental setup itself and the amount of tracer added to the system under study. It is therefore recommended to use different concentrations of tracer and perform the experiments in several replicates. The amount of mercury available for methylation in nature is usually very small. Therefore, adding very low amounts of tracer in the methylation potential studies probably gives results that have a higher environmental relevance. It is also suggested to express the results obtained in absolute amounts of MeHg produced and not just as the percentage of the added tracer.

Occurrence of antibiotic resistance genes and mobile genetic elements in enterococci and genomic DNA during anaerobic digestion of pharmaceutical waste sludge with different pretreatments.

PubMed

Tong, Juan; Lu, XueTing; Zhang, JunYa; Sui, Qianwen; Wang, Rui; Chen, Meixue; Wei, Yuansong

2017-07-01

Pharmaceutical waste sludge harbors large amounts of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs), and it is necessary to study the reduction of ARGs and MGEs during sludge treatment. Therefore, the antibiotic resistance phenotypes and genotypes of enterococci, and the ARGs and MGEs in genomic DNA were investigated during anaerobic digestion (AD) with microwave (MW), thermal hydrolysis (TH) and ozone pretreatment. Results showed that sludge pretreatment increased the occurrence of the resistance phenotypes and genotypes of enterococci. During AD, the resistance of enterococci to macrolides decreased, except for in the MW-pretreated sludge. Horizontal gene transfer and co-occurrence of ermB and tetM in enterococci resulted in increased tetracycline resistance of enterococci throughout the sludge treatment. MGEs such as intI1, ISCR1 and Tn916/1545 had a significant effect on the distribution of ARGs. AD with pretreatment, especially TH pretreatment, resulted in greater ARGs and MGEs reduction and improved methane production. Copyright © 2017. Published by Elsevier Ltd.

Aluminum and Alzheimer's disease: after a century of controversy, is there a plausible link?

PubMed

Tomljenovic, Lucija

2011-01-01

The brain is a highly compartmentalized organ exceptionally susceptible to accumulation of metabolic errors. Alzheimer's disease (AD) is the most prevalent neurodegenerative disease of the elderly and is characterized by regional specificity of neural aberrations associated with higher cognitive functions. Aluminum (Al) is the most abundant neurotoxic metal on earth, widely bioavailable to humans and repeatedly shown to accumulate in AD-susceptible neuronal foci. In spite of this, the role of Al in AD has been heavily disputed based on the following claims: 1) bioavailable Al cannot enter the brain in sufficient amounts to cause damage, 2) excess Al is efficiently excreted from the body, and 3) Al accumulation in neurons is a consequence rather than a cause of neuronal loss. Research, however, reveals that: 1) very small amounts of Al are needed to produce neurotoxicity and this criterion is satisfied through dietary Al intake, 2) Al sequesters different transport mechanisms to actively traverse brain barriers, 3) incremental acquisition of small amounts of Al over a lifetime favors its selective accumulation in brain tissues, and 4) since 1911, experimental evidence has repeatedly demonstrated that chronic Al intoxication reproduces neuropathological hallmarks of AD. Misconceptions about Al bioavailability may have misled scientists regarding the significance of Al in the pathogenesis of AD. The hypothesis that Al significantly contributes to AD is built upon very solid experimental evidence and should not be dismissed. Immediate steps should be taken to lessen human exposure to Al, which may be the single most aggravating and avoidable factor related to AD.

Using morbidity and income data to forecast the variation of growth and employment in the oral healthcare sector.

PubMed

Ostwald, Dennis A; Klingenberger, David

2016-12-01

The perception of the health sector from an economic policy point of view is changing. In the past, health expenditure was mostly seen as a "cost" item, probably because many medical treatments are covered by public health insurance. However, policymakers are increasingly realizing that a growing health sector may be quite beneficial for an economy. It creates employment opportunities and it is relatively resistant to the fluctuations of the business cycle. Input-output analysis could be a useful tool to study the structural change resulting from the growth of the health sector. This paper quantifies for the first time the economic significance of the oral healthcare sector as a component of the German healthcare sector as a whole. The current data for the healthcare sector comes from Health Satellite Accounts, which while comprehensive do fail to answer important questions due to not incorporating certain sectors such as the oral healthcare sector. Therefore on the basis of the Health Satellite Account a specific Satellite Account for the oral healthcare sector is created by using billing data as well as epidemiological data, provided by several dental associations and the Institute of German Dentists. Based on this added information, gross value added data and the number of employees in the oral healthcare sector are computed. Gross value added in 2010 amounted to €13.4 billion, with around €4 billion being attributable to the secondary oral healthcare market; the market for solely out-of-pocket payments. In a second step the paper develops a model to forecast oral healthcare sector growth based on various explanatory variables such as demographic change, take-up behaviour, medical-technical progress, oral morbidity, aggregated supply (collective dental treatment times) as well as income levels and distribution, where the latter two are considered to be of particular importance. According to this model, by 2030 gross value added in the oral healthcare sector will amount to €15.9 million, which corresponds to a 19.2 % increase. The secondary oral healthcare market will be the key to this increase since the model predicts a disproportionately high growth of 60.3 % bringing the total to €6.3 million gross value added in 2030.

Can oral rehydration solution be safely flavored at home?

PubMed

Nijssen-Jordan, C

1997-12-01

To determine the concentration of sodium, potassium, glucose, and osmolality of oral rehydration solutions (ORS) which have been flavored with varying amounts of unsweetened Kool-Aid powder, Jell-O powder, apple juice, or orange juice. Descriptive. Alberta Children's Hospital Chemistry Laboratory. None. Addition of varying amounts of flavoring easily available in all households to commercially available unsweetened ORS. Concentrations of electrolytes, glucose, and osmolality. Addition of fruit juices or flavor powders to commercially produced ORS does alter the electrolyte content and osmolality. When limited amounts of flavoring or juice is added, the osmolality of the solution approaches iso-osmolality. Small amounts of unsweetened Kool-Aid powder, Jell-O powder, and apple or orange juice can be added to oral rehydration solutions without significantly altering electrolyte composition and osmolality.

Quality control of concrete at the stage of designing its composition and technology

NASA Astrophysics Data System (ADS)

Kudyakov, A.; Prischepa, I.; Kiselev, D.; Prischepa, B.

2016-01-01

The results of tests on samples of foam concrete with a hardening accelerator are presented. As the setting and hardening accelerators the following chemical additives were used: Universal-P-2 and Asilin 12. All additives were added into the insulating foam concrete mix of brand D 400 in the amount of 0.5% to 1% of cement weight. By using of additives in foam concrete technology - hardening accelerators Asilin 12 and Universal P2 in the amount of 0.5 % - and 1.0% by weight of cement foam concrete structure formation is accelerated and increases strength by 60%. For the industrial preparation of foam concrete mix technological regulations are worked out, in which it is recommended to use additives - hardening accelerators Asilin 12 in the amount of 0.5% and Universal P2 - 1% of cement weight.

Effects of Core-Shell Rubber (CSR) Nanoparticles on the Fracture Toughness of an Epoxy Resin at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Wang, J.; Cannon, S. A.; Schneider, J. A.

2008-01-01

This study investigates the effects of core-shell rubber (CSR) nanoparticles on the fracture toughness of an epoxy resin at liquid nitrogen (LN2) temperatures. Varying amounts of Kane Ace (Registered TradeMark) MX130 toughening agent were added to a commercially available EPON 862/W epoxy resin. Resulting fracture toughness was evaluated by the use of Charpy impact tests conducted on an instrumented drop tower. The size and distribution of the CSR nanoparticles were characterized using Transmission Electric Microscopy (TEM) and Small Angle X-ray Scattering (SAXS). Up to nominal 4.6% addition of the CSR nanoparticles, resulted in a nearly 5 times increase in the measured breaking energy. However, further increases in the amount of CSR nanoparticles had no appreciable affect on the breaking energy.

Economical and environmentally-friendly approaches for usage of onion (Allium cepa L.) waste.

PubMed

Sharma, Kavita; Mahato, Neelima; Nile, Shivraj Hariram; Lee, Eul Tal; Lee, Yong Rok

2016-08-10

Onion (Allium cepa L.) is one of the most commonly cultivated crops across the globe, and its production is increasing every year due to increasing consumer demand. Simultaneously, huge amounts of waste are produced from different parts of the onion, which ultimately affect the environment in various ways. Hence, proper usage as well as disposal of this waste is important from the environmental aspect. This review summarizes various usage methods of onion waste material, and processes involved to achieve maximum benefits. Processing industries produce the largest amount of onion waste. Other sources are storage systems, domestic usage and cultivation fields. Particular emphasis has been given to the methods used for better extraction and usage of onion waste under specific topics: viz. organic synthesis, production of biogas, absorbent for pollutants and value added products.

The contribution of developmental experience vs. condition to life history, trait variation, and individual differences

PubMed Central

DiRienzo, Nicholas; Montiglio, Pierre-Olivier

2016-01-01

SUMMARY Developmental experience, for example food abundance during juvenile stages, is known to affect life history and behaviour. However, the life history and behavioural consequences of developmental experience have rarely been studied in concert. As a result it is still unclear whether developmental experience affects behaviour through changes in life history, or independently of it.The effect of developmental experience on life history and behaviour may also be masked or affected by individual condition during adulthood. Thus, it is critical to tease apart the effects of developmental experience and current individual condition on life history and behaviour.In this study we manipulated food abundance during development in the western black widow spider, Latrodectus hesperus, by rearing spiders on either a restricted or ad lib diet. We separated developmental from condition dependent effects by assaying adult foraging behaviour (tendency to attack prey and to stay on out of the refuge following an attack) and web structure multiple times under different levels of satiation following different developmental treatments.Spiders reared under food restriction matured slower and at a smaller size than spiders reared in ad lib conditions. Spiders reared on a restricted diet were more aggressive towards prey and built webs structured for prey capture while spiders reared on an ad lib diet were less aggressive and build safer webs. Developmental treatment affected which traits were plastic as adults: restricted spiders built safer webs when their adult condition increased, while ad-lib spiders reduced their aggression when their adult condition increased. The amount of individual variation in behaviour and web structure varied with developmental treatment. Spiders reared on a restricted diet exhibited consistent variation in all aspects of foraging behaviour and web structure, while spiders reared on an ad lib diet exhibited consistent individual variation in aggression and web weight only.Developmental experience affected the average life history, behaviour, and web structure of spiders, but also shaped the amount of phenotypic variation observed among individuals. Surprisingly, developmental experience also determined the particular way in which individuals plastically adjusted their behaviour and web structure to changes in adult condition. PMID:26937627

Cost Comparison of Laparoscopic versus Open Procedures at the Sydney Women's Endosurgery Centre

PubMed Central

Chou, Danny; Cario, Gregory

1998-01-01

Objectives: The objective of this study was to provide a cost comparison between laparoscopic surgery and open surgery from January 1996 to January 1998. The setting for this study was three private hospitals and one public hospital associated with the Sydney Women's Endosurgery Centre. Cost analysis was done using the costing provided by the private and public hospitals representing the total amount charged to the patient or the fund for their entire stay including disposable laparoscopic instruments and miscellaneous charges. We looked at laparoscopic hysterectomy, abdominal hysterectomy, vaginal hysterectomy, laparoscopic Burch colposuspension and open Burch colposus-pension. Despite the difficulties and limitations using our method of cost analysis, it appears that laparoscopic surgery is a less costly alternative to open abdominal surgery, particularly where the amount of disposable instruments are kept to a minimum. When the added advantages of early return to normal activities, family and workplace are added in, it is clear that providers of health care in the public and private sector will see laparoscopic surgery as an increasingly desirable option.

Method of forming a relatively stable slip of silicon metal particles and yttrium containing particles

DOEpatents

Dickie, Ray A.; Mangels, John A.

1984-01-01

The method concerns forming a relatively stable slip of silicon metal particles and yttrium containing particles. In one embodiment, a casting slip of silicon metal particles is formed in water. Particles of a yttrium containing sintering aid are added to the casting slip. The yttrium containing sintering aid is a compound which has at least some solubility in water to form Y.sup.+3 ions which have a high potential for totally flocculating the silicon metal particles into a semiporous solid. A small amount of a fluoride salt is added to the casting slip which contains the yttrium containing sintering aid. The fluoride salt is one which will produce fluoride anions when dissolved in water. The small amount of the fluoride anions produced are effective to suppress the flocculation of the silicon metal particles by the Y.sup.+3 ions so that all particles remain in suspension in the casting slip and the casting slip has both an increased shelf life and can be used to cast articles having a relatively thick cross-section. The pH of the casting slip is maintained in a range from 7.5 to 9. Preferably, the fluoride salt used is one which is based on a monovalent cation such as sodium or ammonia. The steps of adding the yttrium containing sintering aid and the fluoride salt may be interchanged if desired, and the salt may be added to a solution containing the sintering aid prior to addition of the silicon metal particles.

Snacks for Toddlers

MedlinePlus

... them more likely to overeat. A word about juice. Juice — even 100% fruit juice — contains about the same amount of calories as soda. And juice drinks have excessive amounts of added sugar. Letting ...

Cohort Study on Predictors of Need for Nursing Care in Alzheimer's Disease: An Analysis of Healthcare Data.

PubMed

Brüggenjürgen, Bernd; Andersohn, Frank; Burkowitz, Jörg; Ezzat, Nadja; Gaudig, Maren; Willich, Stefan N

2016-10-18

The individual and societal burden of Alzheimer's disease (AD) is substantial. Identifying relevant factors deteriorating AD and inducing need for nursing care would be of high relevance for healthcare planning. The main objective of this study was the identification of predictors of first assignment of a level of long-term care in AD, used as an approximation for disease progression. In a retrospective cohort study using data from a large German statutory health and long-term care insurance (SHI) company, co-morbidities and drug exposure were evaluated with respect to their predictive value for disease progression (first day the amount of daily nursing care exceeded 1.5 hours). Time to disease progression was modeled using COX-proportional hazard regression with stepwise selection of predictor variables. The risk of nursing care need increased substantially with increasing age. Number of hospitalizations and number of different drugs used were significant indicators for progression, whereas outpatient visits were associated with a reduced need for care. Gender did not indicate significant influence on progression. Malignant neoplasms of ill-defined, secondary, and unspecified sites, malnutrition, renal failure, and injuries increased the risk of need for nursing care most significantly. Among prescribed drugs, significant increased risks were associated with drugs used in diabetes, preparations for treatment of wounds and ulcers, antiseptics and disinfectants, and analgesics. Physical comorbidities are relevant contributors to an increase in need for nursing care. Some medical predicting conditions may be linked to cognition, while others may be directly linked to demand for care. AD patients with these comorbidities should be monitored with special attention, as they may be under an increased risk of care dependency.

Emissions impacts of wind and energy storage in a market environment.

PubMed

Sioshansi, Ramteen

2011-12-15

This study examines the emissions impacts of adding wind and energy storage to a market-based electric power system. Using Texas as a case study, we demonstrate that market power can greatly effect the emissions benefits of wind, due to most of the coal-fired generation being owned by the two dominant firms. Wind tends to have less emissions benefits when generators exercise market power, since coal-fired generation is withheld from the market and wind displaces natural gas-fired generators. We also show that storage can have greater negative emissions impacts in the presence of wind than if only storage is added to the system. This is due to wind increasing on- and off-peak electricity price differences, which increases the amount that storage and coal-fired generation are used. We demonstrate that this effect is exacerbated by market power.

Mice with altered BDNF signaling as models for mood disorders and antidepressant effects

PubMed Central

Lindholm, Jesse S. O.; Castrén, Eero

2014-01-01

Brain-derived neurotrophic factor (BDNF) and its receptor tyrosine kinase TrkB support neuronal survival during development and promote connectivity and plasticity in the adult brain. Decreased BDNF signaling is associated with the pathophysiology of depression and the mechanisms underlying the actions of antidepressant drugs (AD). Several transgenic mouse models with decreases or increases in the amount of BDNF or the activity of TrkB signaling have been created. This review summarizes the studies where various mouse models with increased or decreased BDNF levels or TrkB signaling were used to evaluate the role of BDNF signaling in depression-like behavior. Although a large number of models have been employed and several studies have been published, no clear-cut connections between BDNF levels or signaling and depression-like behavior in mice have emerged. However, it is clear that BDNF plays a critical role in the mechanisms underlying the actions of AD. PMID:24817844

Influence of aluminium nitride as a foaming agent on the preparation of foam glass-ceramics from high-titanium blast furnace slag

NASA Astrophysics Data System (ADS)

Shi, Huan; Feng, Ke-qin; Wang, Hai-bo; Chen, Chang-hong; Zhou, Hong-ling

2016-05-01

To effectively reuse high-titanium blast furnace slag (TS), foam glass-ceramics were successfully prepared by powder sintering at 1000°C. TS and waste glass were used as the main raw materials, aluminium nitride (AlN) as the foaming agent, and borax as the fluxing agent. The influence of the amount of AlN added (1wt%-5wt%) on the crystalline phases, microstructure, and properties of the produced foam glass-ceramics was studied. The results showed that the main crystal phases were perovskite, diopside, and augite. With increasing AlN content, a transformation from diopside to augite occurred and the crystallinity of the pyroxene phases slightly decreased. Initially, the average pore size and porosity of the foam glass-ceramics increased and subsequently decreased; similarly, their bulk density and compressive strength decreased and subsequently increased. The optimal properties were obtained when the foam glass-ceramics were prepared by adding 4wt% AlN.

Mercury-binding proteins in the slipper limpet, Crepidula fornicata, exposed to increased soluble mercury

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, F.L.; Watness, K.; Nelson, D.A.

1987-03-01

Crepidula fornicata were held in a flow-through bioassay system and exposed to sand-filtered seawater to which no soluble mercury (control) was added or to which either 5, 25, or 50 {mu}g l{sup {minus}1} soluble Hg was added. At specific intervals during the 16-week experiment, a group of limpets was removed from each tank; one subgroup was exposed for 48 h to high concentrations of Hg, and another was analyzed for Hg-binding proteins by gel-permeation chromatography and spectrometry. Mortality from exposure to Hg in the 48-Hg acute toxicity tests was related to concentrations of Hg experienced both during the long-term exposuremore » period and the 48-h exposure period. Chronic exposure to low levels of Hg resulted in increased amounts of total Hg in the whole body and in the low-molecular-weight Hg-binding proteins. No evidence was found for increased tolerance of Hg with preexposure.« less

Short-chain alkanes synergise responses of moth pests to their sex pheromones.

PubMed

Gurba, Alexandre; Guerin, Patrick M

2016-05-01

The use of sex pheromones for mating disruption of moth pests of crops is increasing worldwide. Efforts are under way to augment the efficiency and reliability of this control method by adding molecules derived from host plants to the sex attractants in dispensers. We show how attraction of the European grapevine moth, Lobesia botrana Den. & Schiff., and the codling moth, Cydia pomonella L., males to underdosed levels of their sex pheromones is increased by adding heptane or octane over a range of release rates. Pheromone-alkane mixtures enhance male recruitment by up to 30%, reaching levels induced by calling females, and shorten the flight time to the sex attractant by a factor of 2. The findings show the promise of using short-chain alkanes as pheromone synergists for mating disruption of insect pests of food crops. Alkane-pheromone combinations are expected to increase the competitiveness of dispensers with females, and to reduce the amount of pheromone needed for the control of these pests. © 2015 Society of Chemical Industry.

Incorporation of Differential Global Positioning System Measurements Using an Extended Kalman Filter for Improved Reference System Performance

DTIC Science & Technology

1991-12-01

Kalman filtering. As GPS usage expands throughout the military and civilian communities, I hope this thesis provides a small contribution in this area...of the measurement’equation. In this thesis, some of the INS states not part of a measurement equation need a small amount of added noise to...estimating the state, but the variance often goes negative. A small amount of added noise in the filter keeps the variance of the state positive and does not

Fructose and metabolic diseases: new findings, new questions.

PubMed

Tappy, Luc; Lê, Kim A; Tran, Christel; Paquot, Nicolas

2010-01-01

There has been much concern regarding the role of dietary fructose in the development of metabolic diseases. This concern arises from the continuous increase in fructose (and total added caloric sweeteners consumption) in recent decades, and from the increased use of high-fructose corn syrup (HFCS) as a sweetener. A large body of evidence shows that a high-fructose diet leads to the development of obesity, diabetes, and dyslipidemia in rodents. In humans, fructose has long been known to increase plasma triglyceride concentrations. In addition, when ingested in large amounts as part of a hypercaloric diet, it can cause hepatic insulin resistance, increased total and visceral fat mass, and accumulation of ectopic fat in the liver and skeletal muscle. These early effects may be instrumental in causing, in the long run, the development of the metabolic syndrome. There is however only limited evidence that fructose per se, when consumed in moderate amounts, has deleterious effects. Several effects of a high-fructose diet in humans can be observed with high-fat or high-glucose diets as well, suggesting that an excess caloric intake may be the main factor involved in the development of the metabolic syndrome. The major source of fructose in our diet is with sweetened beverages (and with other products in which caloric sweeteners have been added). The progressive replacement of sucrose by HFCS is however unlikely to be directly involved in the epidemy of metabolic disease, because HFCS appears to have basically the same metabolic effects as sucrose. Consumption of sweetened beverages is however clearly associated with excess calorie intake, and an increased risk of diabetes and cardiovascular diseases through an increase in body weight. This has led to the recommendation to limit the daily intake of sugar calories. Copyright © 2010 Elsevier Inc. All rights reserved.

Effect of Duck Feet Gelatin Concentration on Physicochemical, Textural, and Sensory Properties of Duck Meat Jellies

PubMed Central

2014-01-01

This study was conducted to determine the effect of duck feet gelatin concentration on the physicochemical, textural and sensory properties of duck meat jellies. Duck feet gelatin was prepared with acidic swelling and hot water extraction. In this study, four duck meat jellies were formulated with 3, 4, 5, and 6% duck feet gelatin, respectively. In the preliminary experiment, the increase in duck feet gelatin ranged from 5 to 20%, resulting in a significant (p<0.001) increase in the color score, but a decline in the hardness and dispersibility satisfaction scores. An increase in the added amount of duck feet gelatin contributed to decreased lightness and increased protein content in duck meat jellies. Regarding the textural properties, increase in the added amount of duck feet gelatin highly correlated with the hardness in the center (p<0.01, R2=0.91), and edge (p<0.01, R2=0.89), of duck meat jellies. Meanwhile, the increase in duck feet gelatin decreased the score for textural satisfaction; duck meat jellies containing 6% duck feet gelatin had a significantly lower textural satisfaction score, than those containing 3% duck feet gelatin (p<0.05). Furthermore, a significant difference in the overall acceptance of duck meat jellies formulated with 5% duck feet gelatin was observed, as compared to those prepared with 3% duck feet gelatin. Therefore, this study suggested that duck feet gelatin is a useful ingredient for manufacturing cold-cut meat products. In consideration of the sensory acceptance, the optimal level of duck feet gelatin in duck meat jellies was determined to be 5%. PMID:26761181

Effect of Adding Cerium on Microstructure and Morphology of Ce-Based Inclusions Formed in Low-Carbon Steel

PubMed Central

Adabavazeh, Z.; Hwang, W. S.; Su, Y. H.

2017-01-01

Intra-granular Acicular Ferrite (IAF), as one of the most well-known desirable microstructure of ferrite with a chaotic crystallographic orientation, can not only refine the microstructure and retard the propagation of cleavage crack but also provide excellent combination of strength and toughness in steel. The effect of adding cerium on microstructure and controlling proper cerium-based inclusions in order to improve properties in low-carbon commercial steel (SS400) were investigated. The type of inclusions can be controlled by changing S/O ratio and Ce content. Without Ce modification, MnS is a dominate inclusion. After adding Ce, the stable inclusion phases change from AlCeO3 to Ce2O2S. The optimum amount of cerium, 0.0235 wt.%, lead in proper grain refinement and formation of cerium oxide, oxy-sulfide and sulfide inclusions. Having a high amount of cerium results in increasing the number of inclusions significantly as a result it cannot be effective enough and the inclusions will act like barriers for others. It is found that the inclusions with a size of about 4∼7 μm can serve as heterogeneous nucleation sites for AF formation. Thermodynamic calculations have been applied to predict the inclusion formation in this molten steel as well, which show a good agreement with experimental one. PMID:28485376

Improvements of nano-SiO2 on sludge/fly ash mortar.

PubMed

Lin, D F; Lin, K L; Chang, W C; Luo, H L; Cai, M Q

2008-01-01

Sewage sludge ash has been widely applied to cementitious materials. In this study, in order to determine effects of nano-SiO(2) additives on properties of sludge/fly ash mortar, different amounts of nano-SiO(2) were added to sludge/fly ash mortar specimens to investigate their physical properties and micro-structures. A water-binding ratio of 0.7 was assigned to the mix. Substitution amounts of 0%, 10%, 20%, and 30% of sludge/fly ash (1:1 ratio) were proposed. Moreover, 0%, 1%, 2%, and 3% of nano-SiO(2) was added to the mix. Tests, including SEM and compressive strength, were carried out on mortar specimens cured at 3, 7, and 28 days. Results showed that sludge/fly ash can make the crystals of cement hydration product finer. Moreover, crystals increased after nano-SiO(2) was added. Hence, nano-SiO(2) can improve the effects of sludge/fly ash on the hydration of mortar. Further, due to the low pozzolanic reaction active index of sludge ash, early compressive strengths of sludge/fly ash mortar were decreased. Yet, nano-SiO(2) could help produce hydration crystals, which implies that the addition of nano-SiO(2) to mortar can improve the influence of sludge/fly ash on the development of the early strength of the mortar.

Spatial Memory Impairment is Associated with Intraneural Amyloid-β Immunoreactivity and Dysfunctional Arc Expression in the Hippocampal-CA3 Region of a Transgenic Mouse Model of Alzheimer's Disease.

PubMed

Morin, Jean-Pascal; Cerón-Solano, Giovanni; Velázquez-Campos, Giovanna; Pacheco-López, Gustavo; Bermúdez-Rattoni, Federico; Díaz-Cintra, Sofía

2016-01-01

Dysfunction of synaptic communication in cortical and hippocampal networks has been suggested as one of the neuropathological hallmarks of the early stages of Alzheimer's disease (AD). Also, several lines of evidence have linked disrupted levels of activity-regulated cytoskeletal associated protein (Arc), an immediate early gene product that plays a central role in synaptic plasticity, with AD "synaptopathy". The mapping of Arc expression patterns in brain networks has been extensively used as a marker of memory-relevant neuronal activity history. Here we evaluated basal and behavior-induced Arc expression in hippocampal networks of the 3xTg-AD mouse model of AD. The basal percentage of Arc-expressing cells in 10-month-old 3xTg-AD mice was higher than wild type in CA3 (4.88% versus 1.77% , respectively) but similar in CA1 (1.75% versus 2.75% ). Noteworthy, this difference was not observed at 3 months of age. Furthermore, although a Morris water maze test probe induced a steep (∼4-fold) increment in the percentage of Arc+ cells in the CA3 region of the 10-month-old wild-type group, no such increment was observed in age-matched 3xTg-AD, whereas the amount of Arc+ cells in CA1 increased in both groups. Further, we detected that CA3 neurons with amyloid-β were much more likely to express Arc protein under basal conditions. We propose that in 3xTg-AD mice, intraneuronal amyloid-β expression in CA3 could increase unspecific neuronal activation and subsequent Arc protein expression, which might impair further memory-stabilizing processes.

HOW DOES ADDING AND REMOVING LIQUID FROM SOCKET BLADDERS AFFECT RESIDUAL LIMB FLUID VOLUME?

PubMed Central

Sanders, JE; Cagle, JC; Harrison, DS; Myers, TR; Allyn, KJ

2015-01-01

Adding and removing liquid from socket bladders is a means for people with limb loss to accommodate residual limb volume change. Nineteen people with trans-tibial amputation using their regular prosthetic socket fitted with fluid bladders on the inside socket surface underwent cycles of bladder liquid addition and removal. In each cycle, subjects sat, stood, and walked for 90s with bladder liquid added and then sat, stood, and walking for 90s again with the bladder liquid removed. The amount of bladder liquid added was increased in each cycle. Bioimpedance analysis was implemented to measure residual limb fluid volume. Results showed that the preferred bladder liquid volume was 16.8 mL (s.d.8.4), corresponding to 1.7% (s.d.0.8%) of the average socket volume between the bioimpedance voltage-sensing electrodes. Limb fluid volume driven out of the residual limb when bladder liquid was added was typically not recovered upon subsequent bladder liquid removal. Fifteen of nineteen subjects experienced a gradual limb fluid volume loss over the test session. Care should be taken when implementing adjustable socket technologies in people with limb amputation. Reducing socket volume may accentuate limb fluid volume loss. PMID:24203546

Sick Leave and Factors Influencing Sick Leave in Adult Patients with Atopic Dermatitis: A Cross-Sectional Study.

PubMed

van Os-Medendorp, Harmieke; Appelman-Noordermeer, Simone; Bruijnzeel-Koomen, Carla; de Bruin-Weller, Marjolein

2015-03-27

Little is known about the prevalence of sick leave due to atopic dermatitis (AD). The current literature on factors influencing sick leave is mostly derived from other chronic inflammatory diseases. This study aimed to determine the prevalence of sick leave due to AD and to identify influencing factors. A cross-sectional study was carried out in adult patients with AD. sick leave during the two-week and one-year periods, socio-demographic characteristics, disease severity, quality of life and socio-occupational factors. Logistic regression analyses were used to determine influencing factors on sick leave over the two-week period. In total, 253 patients were included; 12% of the patients had to take sick leave in the last two weeks due to AD and 42% in the past year. A higher level of symptom interference (OR 1.26; 95% CI 1.13-1.40) or perfectionism/diligence (OR 0.90; 95% CI 0.83-0.96) may respectively increase or decrease the number of sick leave days. Sick leave in patients with AD is a common problem and symptom interference and perfectionism/diligence appeared to influence it. Novel approaches are needed to deal with symptoms at work or school to reduce the amount of sick leave due to AD.

Succession of Periphytic Microorganisms on Metal and Glass Surfaces in Natural Seawater

DTIC Science & Technology

1976-06-01

this depolarization process. Not all investigators agree on the importance of the depolarization mechanisin (Nelson, 1962 ), but an increasing volume...small amounts of water. Hendey (1964), investigating Cladosporiuni rcinae as a fuel contaminant in kerosene-type fuel storage tanks and 2 fuel tanks of...added. Compton (1970) pointed out the naivet6 of some scientists who consider seawater a simple solution of sodium chloride contaminated with a few

Adsorption and covalent binding of fibrinogen as a method for probing the chemical composition of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) microsphere surfaces.

PubMed

Gosecka, Monika; Chehimi, Mohamed M; Basinska, Teresa; Slomkowski, Stanislaw; Makowski, Tomasz

2017-12-01

We investigated the distribution of polyglycidol and polystyrene on the surface of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) microspheres (random distribution or segregated into hydrophilic and hydrophobic patches), using fibrinogen (Fb) as a macromolecular probe. The fibrinogen was adsorbed or covalently attached to the surface of the poly(styrene-co-α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGLy)) microspheres. The P(S/PGLy) particles were prepared by emulsion copolymerization of styrene and α-tert-butoxy-ω-vinylbenzyl-polyglycidol (PGLy) macromonomer initiated with potassium persulfate. The polymerizations yielded P(S/PGLy) particles with various surface fractions of polyglycidol, depending on the amount of added macromonomer and the addition process. In some syntheses, the entire macromonomer amount was added once at the beginning of the polymerization, while in others, the macromonomer was added gradually after the formation of particle seeds from pure polystyrene. XPS studies revealed that the fraction of polyglycidol in the interfacial layer of the microspheres was larger when the entire amount of macromonomer was added at the beginning of the polymerization than when it was added after formation of the polystyrene seeds. Studies of fibrinogen adsorption provided the first evidence of segregation of the hydrophobic (polystyrene) and hydrophilic (polyglycidol) components at the surface of the composite P(S/PGLy) microspheres into patches. The hydrophobic patches are composed mainly of polystyrene. However, they also contain a small amount of polyglycidol chains, making the adsorption of fibrinogen weaker than the adsorption onto the pure polystyrene. Studies of covalent immobilization of fibrinogen on the microspheres via 1,3,5-trichlorotriazine confirmed these findings. Copyright © 2017 Elsevier B.V. All rights reserved.

Spectroscopic characterization of digestates obtained from sludge mixed to increasing amounts of fruit and vegetable wastes

NASA Astrophysics Data System (ADS)

Provenzano, Maria Rosaria; Cavallo, Ornella; Malerba, Anna Daniela; Di Maria, Francesco; Ricci, Anna; Gigliotti, Giovanni

2015-04-01

Anaerobic digestion (AD) represents an efficient waste-treatment technology during which microorganisms break down biodegradable material in absence of oxygen yielding a biogas containing methane. The aim of this work was to investigate the transformations occurring in the organic matter during the co-digestion of waste mixed sludge (WMS) with an increasing amount of fruit and vegetable wastes (FVW) in a pilot scale apparatus reproducing a full-scale digester in an existing wastewater treatment plant. Samples comprised: sludge, FVW, sludge mixed with 10-20-30-40% FVW. Ingestates and digestates were analyzed by means of emission fluorescence spectroscopy and FTIR associated to Fourier self deconvolution (FSD) of spectra. With increasing the amount of FVW from 10% to 20% at which percentage biogas production reached the maximum value, FTIR spectra and FSD traces of digestates exhibited a decrease of intensity of peaks assigned to polysaccharides and aliphatics and an increase of peak assigned to aromatics as a result of the biodegradation of rapidly degradable materials and concentration of aromatic recalcitrant compounds. Digestates with 30 and 40% FVW exhibited a relative increase of intensity of peaks assigned to aliphatics likely as a result of the increasing amount of rapidly degradable materials and the consequent reduction of the hydraulic retention time. This may cause inhibition of methanogenesis and accumulation of volatile fatty acids. The highest emission fluorescence intensity was observed for the digestate with 20% FVW confirming the concentration of aromatic recalcitrant compounds in the substrate obtained at the highest biogas production.

An experimental test of the habitat-amount hypothesis for saproxylic beetles in a forested region.

PubMed

Seibold, Sebastian; Bässler, Claus; Brandl, Roland; Fahrig, Lenore; Förster, Bernhard; Heurich, Marco; Hothorn, Torsten; Scheipl, Fabian; Thorn, Simon; Müller, Jörg

2017-06-01

The habitat-amount hypothesis challenges traditional concepts that explain species richness within habitats, such as the habitat-patch hypothesis, where species number is a function of patch size and patch isolation. It posits that effects of patch size and patch isolation are driven by effects of sample area, and thus that the number of species at a site is basically a function of the total habitat amount surrounding this site. We tested the habitat-amount hypothesis for saproxylic beetles and their habitat of dead wood by using an experiment comprising 190 plots with manipulated patch sizes situated in a forested region with a high variation in habitat amount (i.e., density of dead trees in the surrounding landscape). Although dead wood is a spatio-temporally dynamic habitat, saproxylic insects have life cycles shorter than the time needed for habitat turnover and they closely track their resource. Patch size was manipulated by adding various amounts of downed dead wood to the plots (~800 m³ in total); dead trees in the surrounding landscape (~240 km 2 ) were identified using airborne laser scanning (light detection and ranging). Over 3 yr, 477 saproxylic species (101,416 individuals) were recorded. Considering 20-1,000 m radii around the patches, local landscapes were identified as having a radius of 40-120 m. Both patch size and habitat amount in the local landscapes independently affected species numbers without a significant interaction effect, hence refuting the island effect. Species accumulation curves relative to cumulative patch size were not consistent with either the habitat-patch hypothesis or the habitat-amount hypothesis: several small dead-wood patches held more species than a single large patch with an amount of dead wood equal to the sum of that of the small patches. Our results indicate that conservation of saproxylic beetles in forested regions should primarily focus on increasing the overall amount of dead wood without considering its spatial arrangement. This means dead wood should be added wherever possible including in local landscapes with low or high dead-wood amounts. For species that have disappeared from most forests owing to anthropogenic habitat degradation, this should, however, be complemented by specific conservation measures pursued within their extant distributional ranges. © 2017 by the Ecological Society of America.

The relationship of neighborhood demographic characteristics to point-of-sale tobacco advertising and marketing.

PubMed

Widome, Rachel; Brock, Betsy; Noble, Petra; Forster, Jean L

2013-01-01

Exposure to tobacco marketing has been associated with an increased likelihood that youth start smoking and may interfere with tobacco cessation. We aimed to describe the prevalence, placement, and features of tobacco advertising at the point of sale by race, ethnicity, and other neighborhood demographics, as well as by store type. A cross-sectional assessment of the advertising environment in establishments that held tobacco licenses in our study region (a metropolitan area in the Midwest USA) was conducted in 2007. Stores were geocoded and linked with block group demographic data taken from the Year 2000 US census. We calculated associations between our hypothesized predictors, race, ethnicity, and other neighborhood demographics, and two types of outcomes (1) amount and (2) characteristics of the advertising. Tobacco advertising at the point of sale was most common in gas stations/convenience stores, liquor stores, and tobacco stores. A 10% difference in a block group's African-American/Black population was associated with 9% (95% confidence interval [CI]=3%, 16%) more ads as well as a greater likelihood that ads would be close to the ground (prevalence ratio [PR]=1.15 [95% CI=1.04, 1.28]). Block groups with greater African-American/Black, Asian, people on public assistance or below 150% of the poverty threshold, or people under the age of 18 years had more ads for menthol brands. Block groups with greater proportions of Whites were more likely to have ads that used health words, such as 'light' or 'natural' (PR for 10% difference in White population=1.41 [95% CI=1.17-1.70]). Chain stores were more likely to have greater amounts of advertising, ads close to the ground, ads for price deals, or ads that use words that imply health. Tobacco advertising targets communities with various racial and ethnic profiles in different ways. Now that US Food and Drug Administration has the authority to regulate the marketing and sale of tobacco products, there is new opportunity to reduce the harmful impact of tobacco advertising.

26 CFR 1.412(c)(2)-1 - Valuation of plan assets; reasonable actuarial valuation methods.

Code of Federal Regulations, 2014 CFR

2014-04-01

... computed by— (i) Determining the fair market value of plan assets at least annually, (ii) Adding the...) In determining the adjusted value of plan assets for a prior valuation date, there is added to the... market value, amounts are subtracted from this account and added, to the extent necessary, to raise the...

Carbollide solubility and chemical compatibility summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCabe, D.J.

1993-08-17

This report examines the value of the cobalt dicarbollide anion as an effective form of in-tank precipitation. The cobalt dicarbollide anion (CDC) has been investigated for the possible replacement of tetraphenyl borate anion (TPB) for precipitation of cesium in SRS High Level Waste (HLW). The solubility of the cesium CDC in 5 M salt solutions and the reactivity with caustic have been studied extensively. The solubility of CSCDC in a mixture of 4 M sodium nitrate and 1 m sodium hydroxide is {approximately}2 {times} 10{sup {minus}3} M at 40{degrees}C. Furthermore, the CDC decomposes in 1 M sodium hydroxide solution withmore » apparent first order kinetics with a half-life of 7.3 days at 60 {degrees}C and 94 days at 40{degrees}C. Tank temperatures are currently estimated to approach 60{degrees}C during the ITP filtration cycle. This solubility and rapid decomposition of the CDC under highly alkaline conditions and high temperature would require increasing the quantity of CDC and nonradioactive cesium which must be added, increasing the cost of production. Increasing the quantity of CDC would necessitate recovery of the material, probably using a solvent extraction system. Due to the large amount of nonradioactive cesium which must be added, the total amount of precipitate formed exceeds that for TPB precipitation. Also, formation of sodium and/or potassium precipitates compete with cesium salt precipitation in 5 M salt solutions at lower temperature (<30{degrees}C). Decomposition generates hydrogen, which may lead to process complications.« less

Effects of dietary boron and arsenic on the behavior of mallard ducklings

USGS Publications Warehouse

Whitworth, M.R.; Pendleton, G.W.; Hoffman, D.J.; Camardese, M.B.

1991-01-01

High concentrations of boron and arsenic have been associated with irrigation drain water and aquatic plants consumed by waterfowl. Both compounds affect the central nervous sytem and cause generalized physiological distress in mammals and waterfowl. We examined sublethal efefcts of boron and arsenic on the behavior of developing mallard ducklings (Anas Platyrhnchos). Day-old ducklings received an untreated diet (control) or a diet containing 100, 400, or 1,600 ppm boron, added as boric acid, or 30, 100, or 300 ppm arsenic, added as sodium aresenate. Activity schedules and behavior durations were analyzed for effects at the various treatment levels. Both boron and arsenic at the highest levels had significant effects on the activity schedules of developing ducklings, including increased time at rest and under the provided heat lamp. We also observed decreases in the amount of time treated ducklings spent in alert behaviors and in the water in comparison to control ducklings. High levels of boron (1,600 ppm) increased feeding time overall but did not increase the amount of food consumed. Arsenic had no effect on feeding behavior. There were no differences found in the durations of behaviors as a result of treatment. These findings, in combination with reported effects on the growth and physiology of ducklings under identical treatments, suggest that reported concentrations of these compounds in aquatic plants in the Central Valley of California could adversly affect normal duckling development and survival.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedmann, T.A.; Tallant, D.R.; Barbour, J.C.

Carbon Nitride (CN{sub x}) films have been grown by ion-assisted pulsed-laser deposition (IAPLD). Graphite targets were laser ablated while bombarding the substrate with ions from a broad-beam Kaufman-type ion source. Ion voltage, current density, substrate temperature, and feed gas composition (N{sub 2} in Ar) were varied. Resultant films were characterized by Raman. Fourier transform infrared (FTIR), and Rutherford back scattering (RBS) spectroscopy. Samples with {approximately} 30% N/C ratio have been fabricated. The corresponding Raman and FTIR spectra indicate that nitrogen is incorporated into the samples by insertion into sp{sup 2}-bonded structures. A low level of C{identical_to}N triple bonds is alsomore » found. As the ion current and voltage are increased with a pure Ar ion beam, Raman peaks associated with nanocrystalline graphite appear in the spectra. Adding low levels of nitrogen to the ion beam first reduces the Raman intensity in the vicinity of the graphite disorder peak without adding detectable amounts of nitrogen to the films (as measured by RBS). At higher nitrogen levels in the ion beam, significant amounts of nitrogen are incorporated into the samples, and the magnitude of the ``disorder`` peak increases. By increasing the temperature of the substrate during deposition, the broad peak due mainly to sp{sup 2}-bonded C-N in the FTIR spectra is shifted to lower wavenumber. This could be interpreted as evidence of single-bonded C-N; however, it is more likely that the character of the sp{sup 2} bonding is changing.« less

Cu(II) potentiation of Alzheimer Abeta1-40 cytotoxicity and transition on its secondary structure.

PubMed

Dai, Xue-Ling; Sun, Ya-Xuan; Jiang, Zhao-Feng

2006-11-01

Mounting evidence has shown that dyshomeostasis of the redox-active biometals such as Cu and Fe can lead to oxidative stress, which plays a key role in the neuropathology of Alzheimer' disease (AD). Here we demonstrate that with the formation of Cu(II).beta1-40 complexes, copper markedly potentiates the neurotoxicity exhibited by beta-amyloid peptide (Ab). A greater amount of hydrogen peroxide was released when Cu(II).beta1-40 complexes was added to the xanthine oxidase/xanthine system detected by potassium iodide spectrophotometry. Copper bound to Abeta1-40 was observed by electron paramagnetic resonance (EPR) spectroscopy. Circular dichroism (CD) studies indicated that copper chelation could cause a structural transition of Abeta. The addition of copper to Ab introduced an increase on beta-sheet as well as alpha-helix, which may be responsible for the aggregation of Abeta. We hypothesized that Abeta aggregation induced by copper may be responsible for local injury in AD. The interaction between Cu(2+) and Ab also provides a possible mechanism for the enrichment of metal ions in amyloid plaques in the AD brain.

Effect of water on foaming properties of diglycerol fatty acid ester-oil systems.

PubMed

Shrestha, Lok Kumar; Shrestha, Rekha Goswami; Solans, Conxita; Aramaki, Kenji

2007-06-19

We have studied the effect of added water on the nonaqueous foaming properties of diglycerol fatty acid ester nonionic surfactant systems. Diglycerol monomyristate (designated as DGM) could not foam in nonpolar oils squalane and hexadecane at normal room temperature. Nevertheless, addition of a small amount of water induces a dramatic change in foaming properties. Both the foamability and foam stability increases with the amount of added water within the studied concentration range. Phase behavior study showed that in the dilute regions there is dispersion of solid surfactant in the aforementioned oils in the DGM systems. The particle size of the dispersed solid phase was found to be several tens of microns in the water free system, and hence it tends to coagulate and precipitate. In the case of shorter alkyl chain length, diglycerol monolaurate (DGL) surfactant-oil systems, dispersion of lamellar liquid crystal (Lalpha) is observed at room temperature, and the poor foaming properties were attributed to the large particle size of the liquid crystal. In both the DGL and DGM-oil systems, we observed a tendency of the particle size to decrease with the increasing concentration of added water. At higher temperature, the solid surfactant transforms to lamellar liquid crystal phase, and foaming is improved in the DGM/squalane system. Foams are stable for several minutes. Judging from the foaming test and particle size distribution data it can be concluded that the poor foaming in the diglycerol fatty acid esters-oil systems may possibly be due to bigger particle size, which causes precipitation. Addition of water results in the dispersion of smaller particles and improves the foaming behavior.

A methodological approach to studying resilience mechanisms: demonstration of utility in age and Alzheimer's disease-related brain pathology.

PubMed

Wolf, Dominik; Fischer, Florian Udo; Fellgiebel, Andreas

2018-05-01

The present work aims at providing a methodological approach for the investigation of resilience factors and mechanisms in normal aging, Alzheimer's disease (AD) and other neurodegenerative disorders. By expanding and re-conceptualizing traditional regression approaches, we propose an approach that not only aims at identifying potential resilience factors but also allows for a differentiation between general and dynamic resilience factors in terms of their association with pathology. Dynamic resilience factors are characterized by an increasing relevance with increasing levels of pathology, while the relevance of general resilience factors is independent of the amount of pathology. Utility of the approach is demonstrated in age and AD-related brain pathology by investigating widely accepted resilience factors, including education and brain volume. Moreover, the approach is used to test hippocampal volume as potential resilience factor. Education and brain volume could be identified as general resilience factors against age and AD-related pathology. Beyond that, analyses highlighted that hippocampal volume may not only be disease target but also serve as a potential resilience factor in age and AD-related pathology, particularly at higher levels of tau-pathology (i.e. dynamic resilience factor). Given its unspecific and superordinate nature the approach is suitable for the investigation of a wide range of potential resilience factors in normal aging, AD and other neurodegenerative disorders. Consequently, it may find a wide application and thereby promote the comparability between studies.

Highly dispersed catalysts for coal liquefaction. Quarterly report No. 9, August 23, 1993--November 22, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirschon, A.S.; Wilson, R.B.

We analyzed two sets of liquefaction experiments, one involved the liquefaction of Black Thunder Coal with the corresponding recycle vehicle, and the second set of liquefaction runs involved the liquefaction of Argonne North Dakota Lignite. We compared coal conversions of Black Thunder coal and recycle solvent using Fe(CO){sub 5} and carbon monoxide/hydrogen atmospheres and a MolyVanL molybdenum catalyst under a hydrogen atmosphere. We also continued our investigation of the effect of water on the conversions. We found that addition of water seemed to decrease the amount of oils; we determined the effect of water with the recycle solvent alone, (nomore » coal added) under similar conditions, and again produced a decrease in oil yields. FIMS analyses of the hexane and toluene soluble fractions seem to indicate that in the experiment when water was added, a considerable amount of light material remained behind in the toluene layer, suggesting that somehow the addition of water decreased the amount of extracted material, perhaps by increasing the amount of polarity of the product. When the conversion was conducted with the MolyVanL molybdenum catalyst a good quality product in terms of lower viscosity was produced; however, conversions to THF soluble material was not increased. We believe the molybdenum catalyst hydrogenated the recycle vehicle rather than effectively converted the coal. In order to eliminate the effect of solvent we have often conducted experiments in an inert solvent with Argonne coals. We conducted several coal conversions experiments using an Argonne North Dakota lignite. We compared several dispersed Fe catalysts and in addition, a nickel catalyst. We investigated nickel as a catalyst since we believe this metal may be more effective in decarboxylating low rank coals. Consistent with this premise we found that the nickel catalyst gave the highest conversions.« less

Synthesis and Compatibility of Ionic Liquid Containing Rod-Coil Polyimide Gel Electrolytes with Lithium Metal Electrodes

NASA Technical Reports Server (NTRS)

Tigelaar, Dean M.; Palker, Allyson E.; Meador, Mary Ann B.; Bennett, William R.

2008-01-01

A highly cross-linked polyimide-polyethylene oxide copolymer has been synthesized that is capable of holding large volumes of liquid component, simultaneously maintaining good dimensional stability. An amine end capped oligomer was made that was imidized in solution, followed by reaction with a triisocyanate in the presence of desired additives at ambient temperature. Polymer films are able to hold over 4 times their weight in room temperature ionic liquid RTIL or carbonate solvent. Electrolytes were studied that contained varying amounts of RTIL, lithium trifluoromethanesulfonimide LiTFSi, and alumina nanoparticles. Electrochemical stability of these electrolytes with lithium metal electrodes was studied by galvanic cycling and impedance spectroscopy. Improved cycling stability and decreased interfacial resistance were observed when increasing amounts of RTIL and LiTFSi were added. The addition of small amounts of alumina further decreased interfacial resistance by nearly an order of magnitude. During the course of the study, cycling stability increased from less than 3 to greater than 1000 h at 60 C and 0.25 mA/cm2 current density.

Removing polysaccharides-and saccharides-related coloring impurities in alkyl polyglycosides by bleaching with the H2O2/TAED/NaHCO3 system.

PubMed

Yanmei, Liu; Jinliang, Tao; Jiao, Sun; Wenyi, Chen

2014-11-04

The effect of H2O2/TAED/NaHCO3 system, namely NaHCO3 as alkaline agent with the (tetra acetyl ethylene diamine (TAED)) TAED-activated peroxide system, bleaching of alkyl polyglycosides solution was studied by spectrophotometry. The results showed that the optimal bleaching conditions about H2O2/TAED/NaHCO3 system bleaching of alkyl polyglycosides solution were as follows: molar ratio of TAED to H2O2 was 0.06, addition of H2O2 was 8.6%, addition of NaHCO3 was 3.2%, bleaching temperature of 50-65 °C, addition of MgO was 0.13%, and bleaching time was 8h. If too much amount of NaHCO3 was added to the system and maintained alkaline pH, the bleaching effect would be greatly reduced. Fixing molar ratio of TAED to H2O2 and increasing the amount of H2O2 were beneficial to improve the whiteness of alkyl polyglycosides, but adding too much amount of H2O2 would reduce the transparency. In the TAED-activated peroxide system, NaHCO3 as alkaline agent and buffer agent, could overcome the disadvantage of producing black precipitates when NaOH as alkaline agent. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mitigating Hillslope Erosion After Post-fire Salvage Logging Operations

NASA Astrophysics Data System (ADS)

Robichaud, P. R.; Bone, E. D.; Brown, R. E.

2017-12-01

In the past decades, wildfires around the world have continued to increase in size, severity, and cost. Major concerns after wildfires are the increased runoff and erosion due to loss of the protective forest floor layer, loss of water storage, and creation of water repellent soil conditions. Salvage logging is often a post-fire forest management action to recoup the economic loss of the burned timber, yet concerns arise on the impacts of this activity on water quality. Recently, several studies have been conducted to determine the effect of salvage logging on hillslope erosion. Logging skid trails have been cited as being the cause of high erosion during and after salvage operations. We investigated the impacts of adding operational logging slash to skid trails to reduce hillslope erosion after salvage operations on the 2015 North Star Fire, Washington. We implemented well-designed rapid response approach to compare slash treatment effectiveness by monitoring sediment yield and runoff response from hillslopes with a concentrated flow (rill) experiment. Various runoff amounts are incrementally added to 4 m hillslope plots with and without slash treatments. Our initial results suggest that adding logging slash increased ground cover significantly which contributed to an order of magnitude decrease in hillslope erosion. Integrating erosion mitigation strategies into salvage logging operations should be commonplace when hillslope erosion is a concern.

The effect of Cinnamomum zeylanicum essential oil on chemical characteristics of Lyoner- type sausage during refrigerated storage

PubMed Central

Aminzare, Majid; Aliakbarlu, Javad; Tajik, Hossein

2015-01-01

The effect of Cinnamomum zeylanicum essential oil (CZEO) at two concentrations (0.02% and 0.04% v/w) on chemical composition, pH, water activity (aw), lipid oxidation, color stability and sensory characteristics of Lyoner-type sausage stored at 4 ˚C for 40 days was investigated. The moisture content of the control sample was higher (p < 0.05) than CZEO incorporated samples, while fat, ash and protein content were not affected by adding essential oil. At days 0 and 40, Lightness (L*) and whiteness index (WI) were significantly decreased and total color difference (ΔE) significantly increased (p < 0.05) by adding CZEO. With the exception of first day of storage, redness (a*) and yellowness (b*) were significantly increased and decreased, respectively during the rest of storage (p < 0.05). The pH values were not differing between the control samples and samples containing CZEO (p > 0.05). The water activity content fell in Lyoners with added CZEO during the storage. Incorporation of CZEO retard lipid oxidation process at the end of storage (p < 0.05). Samples containing highest amount of CZEO had higher sensory score compared to control sample. Our results pointed out that CZEO could be used as natural additive for increasing the chemical stability of Lyoner-type sausages. PMID:25992249

Quality control of concrete at the stage of designing its composition and technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kudyakov, A., E-mail: kudyakow@mail.tomsknet.ru; Prischepa, I., E-mail: ingaprishepa@mail.ru; Kiselev, D.

The results of tests on samples of foam concrete with a hardening accelerator are presented. As the setting and hardening accelerators the following chemical additives were used: Universal-P-2 and Asilin 12. All additives were added into the insulating foam concrete mix of brand D 400 in the amount of 0.5% to 1% of cement weight. By using of additives in foam concrete technology – hardening accelerators Asilin 12 and Universal P2 in the amount of 0.5 % - and 1.0% by weight of cement foam concrete structure formation is accelerated and increases strength by 60%. For the industrial preparation ofmore » foam concrete mix technological regulations are worked out, in which it is recommended to use additives – hardening accelerators Asilin 12 in the amount of 0.5% and Universal P2 - 1% of cement weight.« less

Morphology-controlled electrodeposition of Cu{sub 2}O microcrystalline particle films for application in photocatalysis under sunlight

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Guodong; Zhai, Wei; Sun, Fengqiang, E-mail: fqsun@scnu.edu.cn

2012-12-15

Graphical abstract: Display Omitted Highlights: ► PEG was used to electro-deposit Cu{sub 2}O microcrystalline particle films. ► Morphologies of Cu{sub 2}O microcrystals could be controlled by the amount of PEG. ► The films showed regularly varied photocatalytic activities under sunlight. ► The films could be recycled and showed stable activities. -- Abstract: Morphology-controlled Cu{sub 2}O microcrystalline particle films had been successfully electrodeposited on tin-doped indium oxide glass substrates in CuSO{sub 4} solutions containing different amounts of polyethylene glycol (PEG) additives. With an increase of PEG, microcrystals gradually changed from irregular shapes to cubes, octahedrons, and spherical shapes. Sizes increasingly becamemore » smaller with an increase of PEG under the same deposition time. These films had been first used as recyclable photocatalysts and showed excellent and photocatalytic activities in photodegradation of methylene blue (MB) under sunlight. Activities were regularly varied relative to the morphologies of films controlled by the amount of PEG and could be further enhanced by adding a little amount of hydrogen peroxide in the MB solution. The method for controllable preparation of Cu{sub 2}O microcrystals with photocatalytic activities was simple and inexpensive. The as-prepared particle films could also be used in photodegradation of many other pollutants under sunlight.« less

Electricity production coupled to ammonium in a microbial fuel cell.

PubMed

He, Zhen; Kan, Jinjun; Wang, Yanbing; Huang, Yuelong; Mansfeld, Florian; Nealson, Kenneth H

2009-05-01

The production of electricity from ammonium was examined using a rotating-cathode microbial fuel cell (MFC). The addition of ammonium chloride, ammonium sulfate, or ammonium phosphate (monobasic) resulted in electricity generation, while adding sodium chloride, nitrate, or nitrite did not cause any increase in current production. The peak current increased with increasing amount of ammonium addition up to 62.3 mM of ammonium chloride, suggesting that ammonium was involved in electricity generation either directly as the anodic fuel or indirectly as substrates for nitrifiers to produce organic compounds for heterotrophs. Adding nitrate or nitrite with ammonium increased current production compared to solely ammonium addition. Using 16S rRNA-linked molecular analyses, we found ammonium-oxidizing bacteria and denitrifying bacteria on both the anode and cathode electrodes, whereas no anammox bacteria were detected. The dominant ammonium-oxidizing bacteria were closely related to Nitrosomonas europaea. The present MFC achieved an ammonium removal efficiency of 49.2 +/- 5.9 or 69.7 +/- 3.6%, depending on hydraulic retention time, but exhibited a very low Coulombic efficiency.

Clay-enhanced DNA separation in low-molecular-weight poly(N,N-dimethylacrylamide) solution by capillary electrophoresis.

PubMed

Liang, D; Song, L; Chen, Z; Chu, B

2001-06-01

The effect of the separation medium in capillary electrophoresis consisting of a low-molecular-mass poly(N,N-dimethylacrylamide) (PDMA) solution on the DNA separation by adding a small amount of montmorillonite clay into the polymer matrix is presented. On the separation of the pBR322/HaeIII digest, both the resolution and the efficiency were increased by adding 2.5-5.0 x 10(-5) g/mL clay into the 5% w/v PDMA with a molecular mass of only 100 K. Moreover, there was no increase in the migration time of DNA fragments. Similar results were observed by using a C-terminated pGEM-3Zf(+) sequencing DNA sample in a sequencing buffer. Experimental data also showed that the addition of clay increased the viscosity of the polymer solution. We attribute this effect to the structural change of the polymer matrix caused by the exfoliated clay sheets, whereby the thin clay sheets function like a "dynamic cross-linking plate" for the PDMA chains and effectively increase the apparent molecular mass of PDMA.

[Effect of polymeric aluminum-iron on EPS and bio-flocculation in A2/O system].

PubMed

Wen, Qin-Xue; Liu, Ai-Cui; Chen, Zhi-Qiang; Shi, Han-Chang; Lü, Bing-Nan

2012-04-01

Polymeric aluminum-iron (PAFC) was added at the end of aeration tank to enhance phosphorus removal, so that the phosphorus concentration in the effluent could meet the calss A standard in municipal sewage treatment plant pollutant discharge standard (GB 18918-2002). The characteristics of extracellular polymer substances (EPS) and bio-flocculation for the activated sludge in the A2/O system were analyzed in the experiment. The results showed that, the gross of EPS varied little with the increase in PAFC dosage, while, the ratio of albumen to polysaccharide declined from 3.30 to 2.30. When the PAFC dosage increased, the concentration of Al3+ in EPS increased during the whole anaerobic-anoxic-aerobic cycle. The flocs of activated sludge became larger after PAFC addition, Zeta potential of the effluent dropped significantly from - 15.83 mV to -21.20 mV and sludge yield increased. Therefore, bio-flocculation of the activated sludge in the A2/O system improved when a proper amount of PAFC was added, subsequently improve the water quality of the effluent.

Influence of calcium carbonate on extraction yield and quality of extra virgin oil from olive (Olea europaea L. cv. Coratina).

PubMed

Squeo, G; Silletti, R; Summo, C; Paradiso, V M; Pasqualone, A; Caponio, F

2016-10-15

The aim of the research was to evaluate the effect of calcium carbonate (1%, 2%, and 4% of addition) at two different particle sizes (2.7μm and 5.7μm), added at the beginning of the malaxation phase, on both the extraction yield and the quality of oil obtained from Coratina olives at different ripening index. The results showed that calcium carbonate significantly increased the extraction yield of olive oil, more than affecting chemical indices. In particular, for less ripened olives, 1-2% of larger particle size calcium carbonate addiction determined a significant increase of the extraction effectiveness, ranging from 4.0 to 4.9%, while more ripened olives required higher amounts of coadjuvant (2-4% when using the larger particle size and 4% when using the smaller one), with a significant increase of the extraction yield up to 5%. Moreover, an increase of pungent perception was observed in some cases when adding calcium carbonate to more ripened olives. Copyright © 2016 Elsevier Ltd. All rights reserved.

Transformations of inorganic mercury by Candida albicans and Saccharomyces cerevisiae

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yannai, S.; Berdicevsky, I.; Duek, L.

1991-01-01

Saccharomyces cerevisiae and Candida albicans were incubated with 0.25, 0.5, or 0.75 {mu}g of Hg (as HgCl{sub 2}) per ml of Nelson's medium in the presence of trace amounts of oxygen at 28{degree}C for 12 days. Two control media were used, one without added Hg and one without yeast inoculum. Yeast cell growth was estimated after 1, 2, 3, and 8 days of incubation. The contents of organomercury in the system and of elemental mercury released from the media and collected in traps were determined at the end of the experiments. The results were as follows: (1) C. albicans wasmore » the more mercury-resistant species, but both yeast species failed to grown in the media containing 0.75 {mu}g of Hg per ml.; (2) The amounts of organomercury produced by the two species were proportional to the amount of HgCl{sub 2} added to the medium. In all cases C. albicans produced considerably larger amounts of methylmercury than S. cerevisiae; (3) The amounts of elemental Hg produced were inversely proportional to the HgCl{sub 2} level added in the case of S. cerevisiae but were all similar in the case of C. albicans;and (4) Neither organomercury nor elemental Hg was produced in any of the control media.« less

Quantifying and Monetizing Renewable Energy Resiliency

DOE PAGES

Anderson, Kate H.; Laws, Nicholas D.; Marr, Spencer; ...

2018-03-23

Energy resiliency has been thrust to the forefront by recent severe weather events and natural disasters. Billions of dollars are lost each year due to power outages. This article highlights the unique value renewable energy hybrid systems (REHS), comprised of solar, energy storage, and generators, provide in increasing resiliency. We present a methodology to quantify the amount and value of resiliency provided by REHS, and ways to monetize this resiliency value through insurance premium discounts. A case study of buildings in New York City demonstrates how implementing REHS in place of traditional backup diesel generators can double the amount ofmore » outage survivability, with an added value of $781,200. For a Superstorm Sandy type event, results indicate that insurance premium reductions could support up to 4% of the capital cost of REHS, and the potential exists to prevent up to $2.5 billion in business interruption losses with increased REHS deployment.« less

New Green Polymeric Composites Based on Hemp and Natural Rubber Processed by Electron Beam Irradiation

PubMed Central

Stelescu, Maria-Daniela; Craciun, Gabriela; Dumitrascu, Maria

2014-01-01

A new polymeric composite based on natural rubber reinforced with hemp has been processed by electron beam irradiation and characterized by several methods. The mechanical characteristics: gel fraction, crosslink density, water uptake, swelling parameters, and FTIR of natural rubber/hemp fiber composites have been investigated as a function of the hemp content and absorbed dose. Physical and mechanical properties present a significant improvement as a result of adding hemp fibres in blends. Our experiments showed that the hemp fibers have a reinforcing effect on natural rubber similar to mineral fillers (chalk, carbon black, silica). The crosslinking rates of samples, measured using the Flory-Rehner equation, increase as a result of the amount of hemp in blends and the electron beam irradiation dose increasing. The swelling parameters of samples significantly depend on the amount of hemp in blends, because the latter have hydrophilic characteristics. PMID:24688419

Quantifying and Monetizing Renewable Energy Resiliency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Kate H.; Laws, Nicholas D.; Marr, Spencer

Energy resiliency has been thrust to the forefront by recent severe weather events and natural disasters. Billions of dollars are lost each year due to power outages. This article highlights the unique value renewable energy hybrid systems (REHS), comprised of solar, energy storage, and generators, provide in increasing resiliency. We present a methodology to quantify the amount and value of resiliency provided by REHS, and ways to monetize this resiliency value through insurance premium discounts. A case study of buildings in New York City demonstrates how implementing REHS in place of traditional backup diesel generators can double the amount ofmore » outage survivability, with an added value of $781,200. For a Superstorm Sandy type event, results indicate that insurance premium reductions could support up to 4% of the capital cost of REHS, and the potential exists to prevent up to $2.5 billion in business interruption losses with increased REHS deployment.« less

The Effect of Polymer Char on Nitridation Kinetics of Silicon

NASA Technical Reports Server (NTRS)

Chan, Rickmond C.; Bhatt, Ramakrishna T.

1994-01-01

Effects of polymer char on nitridation kinetics of attrition milled silicon powder have been investigated from 1200 to 1350 C. Results indicate that at and above 1250 C, the silicon compacts containing 3.5 wt percent polymer char were fully converted to Si3N4 after 24 hr exposure in nitrogen. In contrast, the silicon compacts without polymer char could not be fully converted to Si3N4 at 1350 C under similar exposure conditions. At 1250 and 1350 C, the silicon compacts with polymer char showed faster nitridation kinetics than those without the polymer char. As the polymer char content is increased, the amount of SiC in the nitrided material is also increased. By adding small amounts (approx. 2.5 wt percent) of NiO, the silicon compacts containing polymer char can be completely nitrided at 1200 C. The probable mechanism for the accelerated nitridation of silicon containing polymer char is discussed.

New green polymeric composites based on hemp and natural rubber processed by electron beam irradiation.

PubMed

Stelescu, Maria-Daniela; Manaila, Elena; Craciun, Gabriela; Dumitrascu, Maria

2014-01-01

A new polymeric composite based on natural rubber reinforced with hemp has been processed by electron beam irradiation and characterized by several methods. The mechanical characteristics: gel fraction, crosslink density, water uptake, swelling parameters, and FTIR of natural rubber/hemp fiber composites have been investigated as a function of the hemp content and absorbed dose. Physical and mechanical properties present a significant improvement as a result of adding hemp fibres in blends. Our experiments showed that the hemp fibers have a reinforcing effect on natural rubber similar to mineral fillers (chalk, carbon black, silica). The crosslinking rates of samples, measured using the Flory-Rehner equation, increase as a result of the amount of hemp in blends and the electron beam irradiation dose increasing. The swelling parameters of samples significantly depend on the amount of hemp in blends, because the latter have hydrophilic characteristics.

Effects of operative conditions on products obtained of starch-oil mixtures by single-screw extrusion.

PubMed

Włodarczyk-Stasiak, Marzena; Mazurek, Artur; Jamroz, Jerzy

2017-01-01

d. The aim of the study was to evaluate the fat binding and physicochemical properties of the products under conditions of potato starch extrusion containing rapeseed or linseed oil and rapeseed oil with glycerol. The study dealt with the extrudates of potato starch produced with the addition of rape seed or linseed oil and rapeseed oil and glycerol at 22% humidity. The extrudates were obtained at two screw speeds: 80 rpm and 100 rpm. Extrudates containing rapeseed oil and glycerol (R6G) were obtained at a temperature distribution of 115/130/150°C, while those with the participation of rapeseed oil and linseed oil were obtained at 120/135/128°C. Water solubility index (WSI), water absorption index (WAI), specific surface area (SBET) and quantity of fat permanently bound were determined for the products obtained. When oils were added, the solubility of extrudates decreased as compared to the control samples (starch without oil; S). Rapeseed oil added to the starch mixture at the levels of 3 g and 6 g in had no sig- nificant effect on the solubility of the product and amounted to: 80.3–82.6% and 78–79.6%. The largest decrease in solubility (WSI, 55.4–57.1%) was demonstrated for samples with 6% addition of rapeseed oil and 10 g glycerol. For these samples (R6G), a significant increase in the index WAI (376–397%) was recorded. Extrudates obtained with the addition of 3 g of rapeseed oil absorbed slightly more water than those with 6 g of oil added. The specific surface area (SBET 230–256 m2/g) determined from the water vapor adsorption isotherm indicates no statistically significant difference at α = 0.05 for products with rapeseed oil, linseed oil, and controls. A significant increase in the specific surface area (SBET 284–347 m2/g) was observed for samples with 6g rapeseed oil and 10 g glycerol added. For samples with 3 g of rapeseed oil, the amount of bound fat was 1.9–2.1 g/100 g of starch and for 6% the starch percentage was 2.96–3.5 g/100 g. The water solubility of starch extrudates with the addition of oils decreases with an increase   in screw speed. Starch extrudates with linseed oil and rapeseed oil plus added glycerol are characterized by an increase in water-absorption capacity with respect to the control extrudates. The products obtained with the addition of rapeseed oil and glycerol exhibit a significant increase in their specific surface area. The quan- tity of fat permanently bound during extrusion depended on: the oil type, its percentage in the mixture and the screw speed. The linseed oil was the least absorbed in the starch structure, but rapeseed oil binding increased with the increase in its level in the mixture.

Impact of functionalized particle structure on roll compaction/dry granulation and tableting of calcium carbonate.

PubMed

Grote, Simon; Kleinebudde, Peter

2018-06-10

The influence of a functionalized raw material particle structure on the granulation behavior and tabletabilty of calcium carbonate (CaCO 3 ) was investigated. Therefore, a milled grade of CaCO 3 was compared to different binary mixtures of milled and functionalized CaCO 3 . Relevant properties of raw materials, ribbons and granules were measured. The starting materials and two fractions of dry granules were compressed to tablets. The tabletability of granules was compared to that of the powders and the influence of specific compaction force and granule size on tablet tensile strength was evaluated. Adding functionalized particles drastically influenced the granulation and tableting behavior of CaCO 3 . Increasing proportions increased the ribbon porosity and granule size. Tensile strength of tablets from powder mixtures and granules was increased as well. Nevertheless, adding functionalized CaCO 3 led to a loss in tabletability induced by a previous compaction step to an extent depending on its proportion in the formulation. A clear influence of the particle morphology on granulation and tableting behavior was demonstrated by the study. The functionalized structure showed aspects of a more plastic deformation behavior. Adding functionalized CaCO 3 to a mixture, even in small amounts, seemed to be beneficial to increase granule size and tablet strength. Copyright © 2018 Elsevier B.V. All rights reserved.

Contributions of Nanodiamond Abrasives and Deionized Water in Magnetorheological Finishing of Aluminum Oxynitride

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miao, C.; Lambropoulos, J.C.; Romanofsky, H.

2010-01-13

Magnetorheological finishing (MRF) is a sub-aperture deterministic process for fabricating high-precision optics by removing material and smoothing the surface. The goal of this work is to study the relative contribution of nanodiamonds and water in material removal for MRF of aluminum oxynitride ceramic (ALON) based upon a nonaqueous magnetorheological (MR) fluid. Removal was enhanced by a high carbonyl iron concentration and the addition of nanodiamond abrasives. Small amounts of deionized (DI) water were introduced into the nonaqueous MR fluid to further influence the material removal process. Material removal data were collected with a spot-taking machine. Drag force (Fd) and normalmore » force (Fn) before and after adding nanodiamonds or DI water were measured with a dual load cell. Both drag force and normal force were insensitive to the addition of nanodiamonds but increased with DI water content in the nonaqueous MR fluid. Shear stress (i.e., drag force divided by spot area) was calculated, and examined as a function of nanodiamond concentration and DI water concentration. Volumetric removal rate increased with increasing shear stress, which was shown to be a result of increasing viscosity after adding nanodiamonds and DI water. This work demonstrates that removal rate for a hard ceramic with MRF can be enhanced by adding DI water into a nonaqueous MR fluid.« less

Experimental Spin Testing of Integrally Damped Composite Plates

NASA Technical Reports Server (NTRS)

Kosmatka, John

1998-01-01

The experimental behavior of spinning laminated composite pretwisted plates (turbo-fan blade-like) with small (less than 10% by volume) integral viscoelastic damping patches was investigated at NASA-Lewis Research Center. Ten different plate sets were experimentally spin tested and the resulting data was analyzed. The first-four plate sets investigated tailoring patch locations and definitions to damp specific modes on spinning flat graphite/epoxy plates as a function of rotational speed. The remaining six plate sets investigated damping patch size and location on specific modes of pretwisted (30 degrees) graphite/epoxy plates. The results reveal that: (1) significant amount of damping can be added using a small amount of damping material, (2) the damped plates experienced no failures up to the tested 28,000 g's and 750,000 cycles, (3) centrifugal loads caused an increase in bending frequencies and corresponding reductions in bending damping levels that are proportional to the bending stiffness increase, and (4) the centrifugal loads caused a decrease in torsion natural frequency and increase in damping levels of pretwisted composite plates.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ay, H.; Özyurek, D.; Yıldırım, M., E-mail: musayildirim@karabuk.edu.tr

In this study, the wear properties of in-situ 7075 Al-Ti composites produced by powder metallurgy route were investigated. Different amount of Ti (2, 4, 6 %) added to gas atomized 7075 Al alloy powders and they were mixed in turbula with 47rpm for 45 minutes. Then the mixed powders were pre-shaped by press under 600 MPa pressure. The samples were cooled in the furnace after sintered at 580 °C for 4 hours in the atmosphere controlled furnace. Standard metallographic process such as grinding, polishing and etching were applied to sintered samples. The hardness values were measured. Scanning Electron Microscope (SEM), X-Raymore » Diffraction (XRD) examines were carried out. The wear tests were performed in a pin-on disc type wear apparatus with 1 ms{sup −1} sliding speed at six different sliding distance (500-3000 m) under 30 N loads. As a result of studies, hardness values were increased with increasing Ti content, in addition the weight losses were decreased with increasing Ti amount.« less

Rescue of Hypovitaminosis A Induces Non-Amyloidogenic Amyloid Precursor Protein (APP) Processing.

PubMed

Reinhardt, Sven; Grimm, Marcus O W; Stahlmann, Christoph; Hartmann, Tobias; Shudo, Koichi; Tomita, Taisuke; Endres, Kristina

2016-01-01

Retinoic acid, the bioactive metabolite of beta-carotene or vitamin A, plays a pleiotropic, multifunctional role in vertebrate development. Studies in rodents revealed that a diet deficient in vitamin A results in a complex neonatal syndrome (the VAD syndrome), manifested in many organs. In humans, the function of retinoic acid (RA) extends into adulthood, where it has important roles in fertility, vision, and suppression of neoplastic growth. In recent years, it has also been suggested that retinoic acid might potentially act as a therapeutically relevant drug in attenuating or even preventing neurodegenerative diseases such as Alzheimer's disease (AD). Here, we report that VAD leads to an increase in A-beta peptide levels while only minor effects were observed on expression levels of the amyloid precursor protein (APP) processing proteinases in wild type mice. In line with these findings, rescue of hypovitaminosis reduced A-beta amount to baseline and induced sApp-alpha secretion in combination with an increase of alpha-secretase Adam10. By comparing retinoic acid treatment starting from a full nutrition status and a "VAD" situation in human neuroblastoma cells, we show that while intensities of differential gene expression were higher in replenished cells, a large overlap in AD-related, regulated genes was observed. Our data suggest that hypovitaminosis A can contribute to onset or progression of AD by increasing synthesis of A-beta peptides and that several AD-related genes such as ADAM10 or BDNF are regulated by retinoic acid. We suggest that dietary supplementation with retinoic acid derivatives is likely to have a beneficial effect on AD-pathology in individuals with hypovitaminosis and patients with normal vitamin A status.

Hypothalamic vasopressin and oxytocin mRNA expression in relation to depressive state in Alzheimer's disease: a difference with major depressive disorder.

PubMed

Meynen, G; Unmehopa, U A; Hofman, M A; Swaab, D F; Hoogendijk, W J G

2009-08-01

Arginine vasopressin (AVP) and oxytocin (OXT), produced in the hypothalamic paraventricular (PVN) and supraoptic nucleus (SON), are considered to be involved in the pathophysiology of major depressive disorder (MDD). The objective of this study was to determine, for the first time, the relationship between AVP and OXT gene expression and depressive state in Alzheimer's disease (AD). Post-mortem brain tissue was obtained from six control subjects, and from a prospectively studied cohort of 23 AD patients, using the DSM-IIIR and the Cornell Scale for Depression in Dementia to determine depression diagnosis and severity. The amount of AVP and OXT mRNA was determined by in situ hybridisation. AD patients did not differ from controls with respect to the amount of AVP or OXT mRNA in the PVN or SON. Also, no differences were found between depressed and nondepressed AD patients and no relationship was found between the depression severity and AVP or OXT mRNA expression. The results indicate that AVP and OXT gene expression in the PVN and SON is unchanged in depressed AD patients compared to nondepressed AD patients. This is in contrast with the enhanced AVP gene expression in MDD, suggesting a difference in pathophysiology between MDD and depression in AD.

77 FR 3818 - Order Making Fiscal Year 2012 Annual Adjustments to Transaction Fee Rates

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... Commission must project the aggregate dollar amount of covered sales of securities on the securities... series {[Delta] 1 , [Delta] 2 , ... , [Delta] 120 {time} . These are given by [mu] = 0.0087 and [sigma...] + [sigma]\\2\\/2), or on average ADS t = 1.017 x ADS t-1 . 6. For December 2011, this gives a forecast ADS of...

Gypsum treated fly ash as a liner for waste disposal facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sivapullaiah, Puvvadi V., E-mail: siva@civil.iisc.ernet.in; Baig, M. Arif Ali, E-mail: reach2arif@gmail.com

2011-02-15

Fly ash has potential application in the construction of base liners for waste containment facilities. While most of the fly ashes improve in the strength with curing, the ranges of permeabilities they attain may often not meet the basic requirement of a liner material. An attempt has been made in the present context to reduce the hydraulic conductivity by adding lime content up to 10% to two selected samples of class F fly ashes. The use of gypsum, which is known to accelerate the unconfined compressive strength by increasing the lime reactivity, has been investigated in further improving the hydraulicmore » conductivity. Hydraulic conductivities of the compacted specimens have been determined in the laboratory using the falling head method. It has been observed that the addition of gypsum reduces the hydraulic conductivity of the lime treated fly ashes. The reduction in the hydraulic conductivity of the samples containing gypsum is significantly more for samples with high amounts of lime contents (as high as 1000 times) than those fly ashes with lower amounts of lime. However there is a relatively more increase in the strengths of the samples with the inclusion of gypsum to the fly ashes at lower lime contents. This is due to the fact that excess lime added to fly ash is not effectively converted into pozzolanic compounds. Even the presence of gypsum is observed not to activate these reactions with excess lime. On the other hand the higher amount of lime in the presence of sulphate is observed to produce more cementitious compounds which block the pores in the fly ash. The consequent reduction in the hydraulic conductivity of fly ash would be beneficial in reducing the leachability of trace elements present in the fly ash when used as a base liner.« less

Effects of fecal sampling on preanalytical and analytical phases in quantitative fecal immunochemical tests for hemoglobin.

PubMed

Rapi, Stefano; Berardi, Margherita; Cellai, Filippo; Ciattini, Samuele; Chelazzi, Laura; Ognibene, Agostino; Rubeca, Tiziana

2017-07-24

Information on preanalytical variability is mandatory to bring laboratories up to ISO 15189 requirements. Fecal sampling is greatly affected by lack of harmonization in laboratory medicine. The aims of this study were to obtain information on the devices used for fecal sampling and to explore the effect of different amounts of feces on the results from the fecal immunochemical test for hemoglobin (FIT-Hb). Four commercial sample collection devices for quantitative FIT-Hb measurements were investigated. The volume of interest (VOI) of the probes was measured from diameter and geometry. Quantitative measurements of the mass of feces were carried out by gravimetry. The effects of an increased amount of feces on the analytical environment were investigated measuring the Hb values with a single analytical method. VOI was 8.22, 7.1 and 9.44 mm3 for probes that collected a target of 10 mg of feces, and 3.08 mm3 for one probe that targeted 2 mg of feces. The ratio between recovered and target amounts of devices ranged from 56% to 121%. Different changes in the measured Hb values were observed, in adding increasing amounts of feces in commercial buffers. The amounts of collected materials are related to the design of probes. Three out 4 manufacturers declare the same target amount using different sampling volumes and obtaining different amounts of collected materials. The introduction of a standard probes to reduce preanalytical variability could be an useful step for fecal test harmonization and to fulfill the ISO 15189 requirements.

The Effect of Oxygen on Organic Haze Properties

NASA Astrophysics Data System (ADS)

Ugelow, Melissa S.; De Haan, David O.; Hörst, Sarah M.; Tolbert, Margaret A.

2018-05-01

Atmospheric organic hazes are present on many planetary bodies, possibly including the ancient Earth and exoplanets, and can greatly influence surface and atmospheric properties. Here we examine the physical and optical properties of organic hazes produced with molecular nitrogen, methane, carbon dioxide, and increasing amounts of molecular oxygen, and compare them to hazes produced without added oxygen. As molecular oxygen is included in increasing amounts from 0 to 200 ppmv, the mass loading of haze produced decreases nonlinearly. With 200 ppmv molecular oxygen, the mass loading of particles produced is on the order of the amount of organic aerosol in modern Earth’s atmosphere, suggesting that while not a thick organic haze, haze particles produced with 200 ppmv molecular oxygen could still influence planetary climates. Additionally, the hazes produced with increasing amounts of oxygen become increasingly oxidized and the densities increase. For hazes produced with 0, 2 and 20 ppmv oxygen, the densities were found to be 0.94, 1.03 and 1.12 g cm‑3, respectively. Moreover, the hazes produced with 0, 2, and 20 ppmv oxygen are found to have real refractive indices of n = 1.58 ± 0.04, 1.53 ± 0.03 and 1.67 ± 0.03, respectively, and imaginary refractive indices of k={0.001}-0.001+0.002, 0.002 ± 0.002 and {0.002}-0.002+0.003, respectively. These k values demonstrate that the particles formed with oxygen have no absorption within our experimental error, and could result in a light scattering layer in an oxygen-containing atmosphere.

Low emissions diesel fuel

DOEpatents

Compere, Alicia L.; Griffith, William L.; Dorsey, George F.; West, Brian H.

1998-01-01

A method and matter of composition for controlling NO.sub.x emissions from existing diesel engines. The method is achieved by adding a small amount of material to the diesel fuel to decrease the amount of NO.sub.x produced during combustion. Specifically, small amounts, less than about 1%, of urea or a triazine compound (methylol melamines) are added to diesel fuel. Because urea and triazine compounds are generally insoluble in diesel fuel, microemulsion technology is used to suspend or dissolve the urea or triazine compound in the diesel fuel. A typical fuel formulation includes 5% t-butyl alcohol, 4.5% water, 0.5% urea or triazine compound, 9% oleic acid, and 1% ethanolamine. The subject invention provides improved emissions in heavy diesel engines without the need for major modifications.

Low emissions diesel fuel

DOEpatents

Compere, A.L.; Griffith, W.L.; Dorsey, G.F.; West, B.H.

1998-05-05

A method and matter of composition for controlling NO{sub x} emissions from existing diesel engines. The method is achieved by adding a small amount of material to the diesel fuel to decrease the amount of NO{sub x} produced during combustion. Specifically, small amounts, less than about 1%, of urea or a triazine compound (methylol melamines) are added to diesel fuel. Because urea and triazine compounds are generally insoluble in diesel fuel, microemulsion technology is used to suspend or dissolve the urea or triazine compound in the diesel fuel. A typical fuel formulation includes 5% t-butyl alcohol, 4.5% water, 0.5% urea or triazine compound, 9% oleic acid, and 1% ethanolamine. The subject invention provides improved emissions in heavy diesel engines without the need for major modifications.

Theoretical considerations for Reaction-Formed Silicon Carbide (RFSC) formation by molten silicon infiltration into slurry-derived preforms

NASA Technical Reports Server (NTRS)

Behrendt, D. R.; Singh, M.

1993-01-01

For reaction-formed silicon carbide (RFSC) ceramics produced by silicon melt infiltration of porous carbon preforms, equations are developed to relate the amount of residual silicon to the initial carbon density. Also, for a slurry derived preform containing both carbon and silicon powder, equations are derived which relate the amount of residual silicon in the RFSC to the relative density of the carbon in the preform and to the amount of silicon powder added to the slurry. For a porous carbon preform that does not have enough porosity to prevent choking-off of the silicon infiltration, these results show that complete silicon infiltration can occur by adding silicon powder to the slurry mixture used to produce these preforms.

Reduction of serum TARC levels in atopic dermatitis by topical anti-inflammatory treatments.

PubMed

Yasukochi, Yumi; Nakahara, Takeshi; Abe, Takeru; Kido-Nakahara, Makiko; Kohda, Futoshi; Takeuchi, Satoshi; Hagihara, Akihito; Furue, Masutaka

2014-09-01

Serum thymus and activation-regulated chemokine (TARC) levels are associated with the disease activity of patients with atopic dermatitis (AD) and sensitively reflect short-term changes in skin conditions. The main treatment for AD is topical agent application. This study investigated the relationship between serum TARC levels and the dosage of topical agents, including corticosteroids and/or tacrolimus, in patients with AD. The serum TARC levels of 56 AD patients and the amounts of topical agents prescribed to them were investigated retrospectively. The weekly reduction in serum TARC levels and weekly dosage of topical agents among AD patients were compared and their associations were evaluated. The dosage of topical agents was closely related to serum TARC levels. One gram of strong rank steroid or the equivalent amount of steroid/tacrolimus is required to reduce serum TARC levels by 9.94 pg/mL weekly in moderate to severe AD patients. Higher initial TARC levels require more topical agent, which results in a more rapid decrease in TARC levels. The serum TARC levels and eosinophil numbers in peripheral blood are significantly correlated. Serum TARC level improvement and topical agent dosage are strongly correlated. TARC and eosinophil numbers are significantly correlated, but the wider range of TARC levels seems to be clinically more useful for monitoring AD severity. The serum TARC level is a very sensitive biomarker for monitoring the severity and treatment response in AD.

Flying Reactors: The Political Feasibility of Nuclear Power in Space

DTIC Science & Technology

2004-04-01

anxiety that ground based nuclear power caused in the minds of the public starting in the early 1970s. The risks and rewards of SNP are in the public...the most. Even extremely small amounts lodging in the body, particularly the lungs are thought to certainly cause lung cancer . Fear of a plutonium...Some have argued that significant increases in worldwide cancer can be directly attributed to the additional plutonium that was added to the

Noninvasive Electrical Neuroimaging of the Human Brain during Mobile Tasks including Walking and Running

DTIC Science & Technology

2012-01-01

not trivial, and the increase is not without drawbacks . For high-density EEG systems, data processing can take a significant amount of time, even...existing wireless transmission systems. Given these drawbacks , a question naturally arises: how many electrodes are needed for MoBI? The answer will...state motor output. Neuroimage 36, 785-792. Kuo, A.D., Donelan, J.M., Ruina, A., 2005. Energetic consequences of walking like an inverted pendulum

Actinomycin D Inhibition of the Zinc-induced Formation of Cytochrome c in Ustilago1

PubMed Central

Brown, D. H.; Cappellini, R. A.; Price, C. A.

1966-01-01

As reported earlier by Grimm & Allen, the addition of zinc to the sporidia of the smut fungus, Ustilago sphaerogena, evokes the formation of large amounts of cytochrome c. This occurs under conditions where the rates of increase of dry weight, RNA, and DNA remain unaffected. Actinomycin D added with zinc specifically abolishes the formation of cytochrome c. The system behaves as if cytochrome c were formed de novo. PMID:5956845

Photosensitive filler minimizes internal stresses in epoxy resins

NASA Technical Reports Server (NTRS)

Dillon, J. N.

1967-01-01

Photosensitive filler is added to curable epoxy resins to minimize stress from internal shrinkage during curing or polymerization. Cinnamic acid resins and cinnamal ketones may be added in the amount of 1 to 3 percent by weight of the resin mixture.

The volatilization of heavy metals during co-combustion of food waste and polyvinyl chloride in air and carbon dioxide/oxygen atmosphere.

PubMed

Ke, Chuncheng; Ma, Xiaoqian; Tang, Yuting; Zheng, Weihua; Wu, Zhendong

2017-11-01

The volatilization of three heavy metals (Cd, Cr and Zn) during food waste and PVC and their blending combustion in N 2 /O 2 or CO 2 /O 2 atmosphere in a lab-scale tubular furnace was investigated. The concentration of heavy metals in combustion ash was decreased with the increment of furnace temperature in most cases. The replacement of 80N 2 /20O 2 by 80CO 2 /20O 2 decreased the volatilization rate of Cd and Cr, but increased Zn. The increased amount of PVC added into food waste led to less content of Zn in combustion ash, 5% PVC added into food waste decreased the volatilization rate of Cr but 15% PVC added led to the higher volatilization. The volatilization rate of Zn in 70CO 2 /30O 2 was significantly lower than in 85CO 2 /15O 2 or 80CO 2 /20O 2 . The result contributes to the understanding of heavy metal volatilization during incineration and emission control of MSW oxy-fuel combustion. Copyright © 2017 Elsevier Ltd. All rights reserved.

Observational and ecological studies of dietary advanced glycation end products in national diets and Alzheimer's disease incidence and prevalence.

PubMed

Perrone, Lorena; Grant, William B

2015-01-01

Considerable evidence indicates that diet is an important risk-modifying factor for Alzheimer's disease (AD). Evidence is also mounting that dietary advanced glycation end products (AGEs) are important risk factors for AD. This study strives to determine whether estimated dietary AGEs estimated from national diets and epidemiological studies are associated with increased AD incidence. We estimated values of dietary AGEs using values in a published paper. We estimated intake of dietary AGEs from the Washington Heights-Inwood Community Aging Project (WHICAP) 1992 and 1999 cohort studies, which investigated how the Mediterranean diet (MeDi) affected AD incidence. Further, AD prevalence data came from three ecological studies and included data from 11 countries for 1977-1993, seven developing countries for 1995-2005, and Japan for 1985-2008. The analysis used dietary AGE values from 20 years before the AD prevalence data. Meat was always the food with the largest amount of AGEs. Other foods with significant AGEs included fish, cheese, vegetables, and vegetable oil. High MeDi adherence results in lower meat and dairy intake, which possess high AGE content. By using two different models to extrapolate dietary AGE intake in the WHICAP 1992 and 1999 cohort studies, we showed that reduced dietary AGE significantly correlates with reduced AD incidence. For the ecological studies, estimates of dietary AGEs in the national diets corresponded well with AD prevalence data even though the cooking methods were not well known. Dietary AGEs appear to be important risk factors for AD.

Molecular Engineering toward Stabilized Interface: An Electrolyte Additive for High-Performance Li-Ion Battery

DOE PAGES

Zhang, Lu; Huang, Jinhua; Youssef, Kyrrilos; ...

2014-10-31

A novel electrolyte additive, 3-oxabicyclo[3.1.0]hexane-2,4-dione (OHD), has been discovered and evaluated in Li- 1.1(Mn 1/3Ni 1/3Co 1/3) 0.9O 2/graphite cells under elevated temperature. When an appropriate amount of OHD is used, the cell capacity retention is improved from 60% (Gen 2 electrolyte alone) to 82% (Gen 2 electrolyte plus OHD) after 200 cycles with no obvious impedance increase. The amount of OHD added is the key to achieving the superior cell performance. In conclusion, the effect of OHD additive was investigated by means of electrochemical analysis, fourier transform infrared spectroscopy, scanning electron microscopy, and density functional theory computation.

Simple system for measuring tritium Ad/absorption using a 2. pi. counter and thermal desorption spectrometer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyake, H.; Matsuyama, M.; Watanabe, K.

1992-03-01

In this paper, the authors develop a simple system using tritium tracer and thermal desorption techniques to measure the tritium adsorption and/or absorption on/in a material having typical surface conditions: namely, not cleaned surface. The tritium counting devices used were a 2{pi} counter and conventional proportional counter. With this system, the amounts of ad/absorption could be measured without exposing the samples to air after exposing them to tritium gas. The overall efficiency (F) of the 2{pi} counter was described at F = exp({minus}2.64h), where h is the distance from the sample to the detector. Ad/absorption measurements were carried out formore » several materials used for fabricating conventional vacuum systems. The results were, in the order of decreasing amounts of ad/absorption, as (fiber reinforced plastics(FRP)) {gt} (nickel(Ni), molybdenum disulfide(MoS{sub 2})) {gt} (stainless steel (SS304), iron(Fe), aluminum alloy(A2219)) {gt} (boron nitride(h-BN), silicon carbide (SiC), SS304 passivated by anodic oxidation layers(ASS) and that by boron nitride segregation layers (BSS)). The relative amounts were abut 100 for Ni and 0.1 for ASS and BSS, being normalized to Fe = 1.« less

A comparative study of methanol as a supplementary carbon source for enhancing denitrification in primary and secondary anoxic zones.

PubMed

Ginige, Maneesha P; Bowyer, Jocelyn C; Foley, Leah; Keller, Jürg; Yuan, Zhiguo

2009-04-01

A comparative study on the use of methanol as a supplementary carbon source to enhance denitrification in primary and secondary anoxic zones is reported. Three lab-scale sequencing batch reactors (SBR) were operated to achieve nitrogen and carbon removal from domestic wastewater. Methanol was added to the primary anoxic period of the first SBR, and to the secondary anoxic period of the second SBR. No methanol was added to the third SBR, which served as a control. The extent of improvement on the denitrification performance was found to be dependent on the reactor configuration. Addition to the secondary anoxic period is more effective when very low effluent nitrate levels are to be achieved and hence requires a relatively large amount of methanol. Adding a small amount of methanol to the secondary anoxic period may cause nitrite accumulation, which does not improve overall nitrogen removal. In the latter case, methanol should be added to the primary anoxic period. The addition of methanol can also improve biological phosphorus removal by creating anaerobic conditions and increasing the availability of organic carbon in wastewater for polyphosphate accumulating organisms. This potentially provides a cost-effective approach to phosphorus removal from wastewater with a low carbon content. New fluorescence in situ hybridisation (FISH) probes targeting methanol-utilising denitrifiers were designed using stable isotope probing. Microbial structure analysis of the sludges using the new and existing FISH probes clearly showed that the addition of methanol stimulated the growth of specific methanol-utilizing denitrifiers, which improved the capability of sludge to use methanol and ethanol for denitrification, but reduced its capability to use wastewater COD for denitrification. Unlike acetate, long-term application of methanol has no negative impact on the settling properties of the sludge.

Phosphorus and nitrate nitrogen in runoff following fertilizer application to turfgrass.

PubMed

Shuman, L M

2002-01-01

Intensively managed golf courses are perceived by the public as possibly adding nutrients to surface waters via surface transport. An experiment was designed to determine the transport of nitrate N and phosphate P from simulated golf course fairways of 'Tifway' bermudagrass [Cynodon dactylon (L.) Pers.]. Fertilizer treatments were 10-10-10 granular at three rates and rainfall events were simulated at four intervals after treatment (hours after treatment, HAT). Runoff volume was directly related to simulated rainfall amounts and soil moisture at the time of the event and varied from 24.3 to 43.5% of that added for the 50-mm events and 3.1 to 27.4% for the 25-mm events. The highest concentration and mass of phosphorus in runoff was during the first simulated rainfall event at 4 HAT with a dramatic decrease at 24 HAT and subsequent events. Nitrate N concentrations were low in the runoff water (approximately 0.5 mg L-1) for the first three runoff events and highest (approximately 1-1.5 mg L-1) at 168 HAT due to the time elapsed for conversion of ammonia to nitrate. Nitrate N mass was highest at the 4 and 24 HAT events and stepwise increases with rate were evident at 24 HAT. Total P transported for all events was 15.6 and 13.8% of that added for the two non-zero rates, respectively. Total nitrate N transported was 1.5 and 0.9% of that added for the two rates, respectively. Results indicate that turfgrass management should include applying minimum amounts of irrigation after fertilizer application and avoiding application before intense rain or when soil is very moist.

Do Preschools Offer Healthy Beverages to Children? A Nationwide Study in Poland

PubMed Central

Myszkowska-Ryciak, Joanna; Harton, Anna

2017-01-01

Background: Children’s beverage consumption patterns have received increased attention in light of the obesity epidemic in this group. In day care centers (DCCs), children spend up to 10 h a day, and typically consume half to three quarters of their daily food intake. The purpose of the study was to investigate what beverages are typically served to children in preschools in Poland, and to evaluate the practices associated with adding sugar and other sweetening agents to beverages. Methods: Direct interviews with preschools staff were conducted with a questionnaire regarding offered beverages and adding sugar and other sweetening agents. The menu of 10 consecutive days and inventory reports were analyzed to verify information. Results: A total of 720 preschools were included in the study. Cocoa and milk coffee substitute were served in 95% of preschools, followed by compote (92%), tea (84%), fruit/herbal tea (73%) and water (69%). Water was the only beverage available between meals (93% DCCs). 86% of preschools added sugar to tea/cocoa/coffee substitute drinks, and 74% to compote. Conclusions: In the majority of preschools, beverages which are not recommended were offered. Such an assortment of beverages and common practice of sweetening can increase the amount of added sugar in a children diet. Nutrition education and legal regulations concerning the assortment of beverages served in preschools are urgently needed. PMID:29072604

Effect of magnetite powder on anaerobic co-digestion of pig manure and wheat straw.

PubMed

Wang, Yanzi; Ren, Guangxin; Zhang, Tong; Zou, Shuzhen; Mao, Chunlan; Wang, Xiaojiao

2017-08-01

This study investigated the effects of different amounts of magnetite powder (i.e., 0g, 1.5g, 3g, 4.5g, 6g) on the anaerobic co-digestion of pig manure (PM) and wheat straw (WS). The variations in pH, alkalinity, cellulase activity (CEA), dehydrogenase activity (DHA) and methane production, were analyzed by phases. Correlation of the activities of the two enzymes with methane production was also analyzed, and the Gompertz model was used to evaluate the efficiency of anaerobic digestion (AD) with the addition of magnetite powder. The results showed that magnetite powder had significant effects on the anaerobic co-digestion of PM and WS. The maximum total methane production with the addition of 3g of magnetite powder was 195mL/g total solids (TS), an increase of 72.1%. The CEA and DHA increased with magnetite powder in the ranges of 1.5-4.5g, 1.5-6g, respectively, while the methane production showed a better correlation with DHA than with CEA. Using the Gompertz model, the efficiency of AD was optimal when adding 3g magnetite powder, with higher methane production potential (206mL/g TS), shorter lag-phase time (14.9d) and shorter AD period (44d). Copyright © 2017 Elsevier Ltd. All rights reserved.

Premixed calcium silicate cement for endodontic applications

PubMed Central

Persson, Cecilia; Engqvist, Håkan

2011-01-01

Calcium silicate-based materials (also called MTA) are increasingly being used in endodontic applications. However, the handling properties of MTA are not optimal when it comes to injectability and cohesion. Premixing the cements using glycerol avoids these issues. However, there is a lack of data on the effect of common cement variables on important properties of premixed cements for endodontic applications. In this study, the effects of liquid-to-powder ratio, amount of radiopacifier and amount of calcium sulfate (added to control the setting time) were screened using a statistical model. In the second part of the study, the liquid-to-powder ratio was optimized for cements containing three different amounts of radiopacifier. Finally, the effect of using glycerol rather than water was evaluated in terms of radiopacity. The setting time was found to increase with the amount of radiopacifier when the liquid-to-powder ratio was fixed. This was likely due to the higher density of the radiopacifier in comparison to the calcium silicate, which gave a higher liquid-to-powder ratio in terms of volume. Using glycerol rather than water to mix the cements led to a decrease in radiopacity of the cement. In conclusion, we were able to produce premixed calcium silicate cements with acceptable properties for use in endodontic applications. PMID:23507729

Premixed calcium silicate cement for endodontic applications: injectability, setting time and radiopacity.

PubMed

Persson, Cecilia; Engqvist, Håkan

2011-01-01

Calcium silicate-based materials (also called MTA) are increasingly being used in endodontic applications. However, the handling properties of MTA are not optimal when it comes to injectability and cohesion. Premixing the cements using glycerol avoids these issues. However, there is a lack of data on the effect of common cement variables on important properties of premixed cements for endodontic applications. In this study, the effects of liquid-to-powder ratio, amount of radiopacifier and amount of calcium sulfate (added to control the setting time) were screened using a statistical model. In the second part of the study, the liquid-to-powder ratio was optimized for cements containing three different amounts of radiopacifier. Finally, the effect of using glycerol rather than water was evaluated in terms of radiopacity. The setting time was found to increase with the amount of radiopacifier when the liquid-to-powder ratio was fixed. This was likely due to the higher density of the radiopacifier in comparison to the calcium silicate, which gave a higher liquid-to-powder ratio in terms of volume. Using glycerol rather than water to mix the cements led to a decrease in radiopacity of the cement. In conclusion, we were able to produce premixed calcium silicate cements with acceptable properties for use in endodontic applications.

Recommended number of strides for automatic assessment of gait symmetry and regularity in above-knee amputees by means of accelerometry and autocorrelation analysis

PubMed Central

2012-01-01

Background Symmetry and regularity of gait are essential outcomes of gait retraining programs, especially in lower-limb amputees. This study aims presenting an algorithm to automatically compute symmetry and regularity indices, and assessing the minimum number of strides for appropriate evaluation of gait symmetry and regularity through autocorrelation of acceleration signals. Methods Ten transfemoral amputees (AMP) and ten control subjects (CTRL) were studied. Subjects wore an accelerometer and were asked to walk for 70 m at their natural speed (twice). Reference values of step and stride regularity indices (Ad1 and Ad2) were obtained by autocorrelation analysis of the vertical and antero-posterior acceleration signals, excluding initial and final strides. The Ad1 and Ad2 coefficients were then computed at different stages by analyzing increasing portions of the signals (considering both the signals cleaned by initial and final strides, and the whole signals). At each stage, the difference between Ad1 and Ad2 values and the corresponding reference values were compared with the minimum detectable difference, MDD, of the index. If that difference was less than MDD, it was assumed that the portion of signal used in the analysis was of sufficient length to allow reliable estimation of the autocorrelation coefficient. Results All Ad1 and Ad2 indices were lower in AMP than in CTRL (P < 0.0001). Excluding initial and final strides from the analysis, the minimum number of strides needed for reliable computation of step symmetry and stride regularity was about 2.2 and 3.5, respectively. Analyzing the whole signals, the minimum number of strides increased to about 15 and 20, respectively. Conclusions Without the need to identify and eliminate the phases of gait initiation and termination, twenty strides can provide a reasonable amount of information to reliably estimate gait regularity in transfemoral amputees. PMID:22316184

Effects of added antibiotics on the basic properties of anti-washout-type fast-setting calcium phosphate cement.

PubMed

Takechi, M; Miyamoto, Y; Ishikawa, K; Nagayama, M; Kon, M; Asaoka, K; Suzuki, K

1998-02-01

The effect of added antibiotics on the basic properties of anti-washout-type fast-setting calcium phosphate cement (aw-FSCPC) was investigated in a preliminary evaluation of aw-FSCPC containing drugs. Flomoxef sodium was employed as the antibiotic and was incorporated into the powder-phase aw-FSCPC at up to 10%. The setting time, consistency, wet diametral tensile strength (DTS) value, and porosity were measured for aw-FSCPC containing various amounts of flomoxef sodium. X-ray diffraction (XRD) analysis was also conducted for the identification of products. To evaluate the drug-release profile, set aw-FSCPC was immersed in saline and the released flomoxef sodium was determined at regular intervals. The spread area of the cement paste as an index of consistency of the cement increased progressively with the addition of flomoxef sodium, and it doubled when the aw-FSCPC contained 8% flomoxef sodium. In contrast, the wet DTS value decreased with increase in flomoxef sodium content. Bulk density measurement and scanning electron microscopic observation revealed that the set mass was more porous with the amount of flomoxef sodium contained in the aw-FSCPC. The XRD analysis revealed that formation of hydroxyapatite (HAP) from aw-FSCPC was reduced even after 24 h, when the aw-FSCPC contained flomoxef sodium at > or = 6%. Therefore, the decrease of wet DTS value was thought to be partly the result of the increased porosity and inhibition of HAP formation in aw-FSCPC containing large amounts of flomoxef sodium. The flomoxef sodium release from aw-FSCPC showed the typical profile observed in a skeleton-type drug delivery system (DDS). The rate of drug release from aw-FSCPC can be controlled by changing the concentration of sodium alginate. Although flomoxef sodium addition has certain disadvantageous effects on the basic properties of aw-FSCPC, we conclude that aw-FSCPC is a good candidate for potential use as a DDS carrier that may be useful in surgical operations.

24 CFR 241.565 - Maximum loan amount.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems, and Individual Utility... energy conserving improvements including the purchase thereof, cost of installation, architect's fees... of the energy conserving improvements. (b) An amount which, when added to the existing outstanding...

24 CFR 241.565 - Maximum loan amount.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems, and Individual Utility... energy conserving improvements including the purchase thereof, cost of installation, architect's fees... of the energy conserving improvements. (b) An amount which, when added to the existing outstanding...

24 CFR 241.565 - Maximum loan amount.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems, and Individual Utility... energy conserving improvements including the purchase thereof, cost of installation, architect's fees... of the energy conserving improvements. (b) An amount which, when added to the existing outstanding...

24 CFR 241.565 - Maximum loan amount.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems, and Individual Utility... energy conserving improvements including the purchase thereof, cost of installation, architect's fees... of the energy conserving improvements. (b) An amount which, when added to the existing outstanding...

24 CFR 241.565 - Maximum loan amount.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Purchase and Installation of Energy Conserving Improvements, Solar Energy Systems, and Individual Utility... energy conserving improvements including the purchase thereof, cost of installation, architect's fees... of the energy conserving improvements. (b) An amount which, when added to the existing outstanding...

Effects of adding red wine on the physicochemical properties and sensory characteristics of uncured frankfurter-type sausage.

PubMed

Feng, Xi; Sebranek, Joseph G; Lee, Hyun Yong; Ahn, Dong Uk

2016-11-01

The aim of this work was to evaluate the quality and sensory characteristics of RTE frankfurter-type sausage cured with celery juice powder and including red wine. Four frankfurter treatments including a conventionally cured treatment without red wine (control) and three treatments cured with pre-converted vegetable juice powder and 0%, 5% or 10% (v/w) red wine were prepared. Results showed that adding 5% red wine increased the a*-value, and the textural resilience, cohesiveness and springiness of the frankfurters, as well as decreased lipid/protein oxidation of the final products. Added wine also introduced new volatiles (alcohol and ester compounds) to the frankfurters. The principal component (PC) analysis showed that the pre-converted vegetable juice powder achieved the same effects as the conventional curing agents for typical frankfurter properties. However, the addition of excess amounts of red wine (10%) to the meat batter decreased the pH of meat batter and accelerated lipid oxidation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Aβ1-16 conformational changes induced by heavy metals, antioxidants, and corn zeins: CD, AFM, SEM, and FT-IR studies

NASA Astrophysics Data System (ADS)

Murariu, Manuela; Mihai, Marcela; Zaharia, Marius; Drochioiu, Gabi

2014-10-01

Amyloid-beta (known also as Aβ or A-beta or beta-amyloid) is a peptide of 36-43 amino acids that appears to be the main constituent of amyloid plaques in the brains of Alzheimer's disease (AD) patients. The transformation process from α-helix to β-sheet structures appears to be one of the major factors in the genesis and evolution of a variety of neurodegenerative diseases such as AD, Parkinson's disease (PD), and several prion diseases [1,2]. Metal-based reactions of some polypeptides and proteins are considered as a common denominator for neurodegenerative diseases (Figure 1) [3,4]. Amyloid-β (Aβ) aggregates are associated with Alzheimer's disease (AD), and may be promoted by the trace amounts of metal ions like aluminium, iron, zinc or copper [5-11]. For example, copper ions cause the peptide aggregation to a great extent and highly increase the neurotoxicity exhibited by Aβ1-40 in cell culture [11].

Metal-ion retention properties of water-soluble amphiphilic block copolymer in double emulsion systems (w/o/w) stabilized by non-ionic surfactants.

PubMed

Palencia, Manuel; Rivas, Bernabé L

2011-11-15

Metal-ion retention properties of water-soluble amphiphilic polymers in presence of double emulsion were studied by diafiltration. Double emulsion systems, water-in-oil-in-water, with a pH gradient between external and internal aqueous phases were prepared. A poly(styrene-co-maleic anhydride) (PSAM) solution at pH 6.0 was added to the external aqueous phase of double emulsion and by application of pressure a divalent metal-ion stream was continuously added. Metal-ions used were Cu(2+) and Cd(2+) at the same pH of polymer solution. According to our results, metal-ion retention is mainly the result of polymer-metal interaction. Interaction between PSMA and reverse emulsion globules is strongly controlled by amount of metal-ions added in the external aqueous phase. In addition, as metal-ion concentration was increased, a negative effect on polymer retention capacity and promotion of flocculation phenomena were produced. Copyright © 2011 Elsevier Inc. All rights reserved.

Effects of oat β-glucan consumption at breakfast on ad libitum eating, appetite, glycemia, insulinemia and GLP-1 concentrations in healthy subjects.

PubMed

Zaremba, Suzanne M M; Gow, Iain F; Drummond, Sandra; McCluskey, Jane T; Steinert, Robert E

2018-06-18

There is evidence that oat β-glucan lowers appetite and ad libitum eating; however, not all studies are consistent, and the underpinning mechanisms are not entirely understood. We investigated the effects of 4 g high molecular weight (MW) oat β-glucan on ad libitum eating, subjective appetite, glycemia, insulinemia and plasma GLP-1 responses in 33 normal-weight subjects (22 female/11 male, mean age (y): 26.9 ± 1.0, BMI (kg/m 2 ): 23.5 ± 0.4). The study followed a randomised double-blind, cross-over design with subjects fed two test breakfasts with and without oat β-glucan followed by an ad libitum test meal on two different days. Blood samples and ratings for subjective appetite were collected postprandially at regular time intervals. Oat β-glucan increased feelings of fullness (p = 0.048) and satiety (p = 0.034), but did not affect energy and amount eaten at the ad libitum test meal. There was a treatment by time interaction for plasma GLP-1, plasma insulin and blood glucose. GLP-1 was significantly reduced at 90 min (p = 0.021), blood glucose at 30 min (p = 0.008) and plasma insulin at 30 and 60 min (p = 0.002 and 0.017, respectively) following the oat β-glucan breakfast when compared with the control breakfast. Four grams of high MW oat β-glucan lowers appetite but not ad libitum eating and beneficially modulates postprandial glycaemia, it does however, not increase plasma GLP-1 secretion. Copyright © 2018 Elsevier Ltd. All rights reserved.

Protective Immunity Against a Lethal Respiratory Yersinia pestis Challenge Induced by V Antigen or the F1 Capsular Antigen Incorporated into Adenovirus Capsid

PubMed Central

Boyer, Julie L.; Sofer-Podesta, Carolina; Ang, John; Hackett, Neil R.; Chiuchiolo, Maria J.; Senina, Svetlana; Perlin, David

2010-01-01

Abstract The aerosol form of the bacterium Yersinia pestis causes pneumonic plague, a rapidly fatal disease that is a biothreat if deliberately released. At present, no plague vaccines are available for use in the United States, but subunit vaccines based on the Y. pestis V antigen and F1 capsular protein show promise when administered with adjuvants. In the context that adenovirus (Ad) gene transfer vectors have a strong adjuvant potential related to the ability to directly infect dendritic cells, we hypothesized that modification of the Ad5 capsid to display either the Y. pestis V antigen or the F1 capsular antigen on the virion surface would elicit high V antigen- or F1-specific antibody titers, permit boosting with the same Ad serotype, and provide better protection against a lethal Y. pestis challenge than immunization with equivalent amounts of V or F1 recombinant protein plus conventional adjuvant. We constructed AdYFP-pIX/V and AdLacZ-pIX/F1, E1–, E3– serotype 5 Ad gene transfer vectors containing a fusion of the sequence for either the Y. pestis V antigen or the F1 capsular antigen to the carboxy-terminal sequence of pIX, a capsid protein that can accommodate the entire V antigen (37 kDa) or F1 protein (15 kDa) without disturbing Ad function. Immunization with AdYFP-pIX/V followed by a single repeat administration of the same vector at the same dose resulted in significantly better protection of immunized animals compared with immunization with a molar equivalent amount of purified recombinant V antigen plus Alhydrogel adjuvant. Similarly, immunization with AdLacZ-pIX/F1 in a prime–boost regimen resulted in significantly enhanced protection of immunized animals compared with immunization with a molar-equivalent amount of purified recombinant F1 protein plus adjuvant. These observations demonstrate that Ad vaccine vectors containing pathogen-specific antigens fused to the pIX capsid protein have strong adjuvant properties and stimulate more robust protective immune responses than equivalent recombinant protein-based subunit vaccines administered with conventional adjuvant, suggesting that F1-and/or V-modified capsid Ad-based recombinant vaccines should be considered for development as anti-plague vaccines. PMID:20180652

Impact of dietary lipids on sow milk composition and balance of essential fatty acids during lactation in prolific sows.

PubMed

Rosero, D S; Odle, J; Mendoza, S M; Boyd, R D; Fellner, V; van Heugten, E

2015-06-01

Two studies were designed to determine the effects of supplementing diets with lipid sources of EFA (linoleic and α-linolenic acid) on sow milk composition to estimate the balance of EFA for sows nursing large litters. In Exp. 1, 30 sows, equally balanced by parity (1 and 3 to 5) and nursing 12 pigs, were fed diets supplemented with 6% animal-vegetable blend (A-V), 6% choice white grease (CWG), or a control diet without added lipid. Diets were corn-soybean meal based with 8% corn distiller dried grains with solubles and 6% wheat middlings and contained 3.25 g standardized ileal digestible Lys/Mcal ME. Sows fed lipid-supplemented diets secreted greater amounts of fat (P = 0.082; 499 and 559 g/d for control and lipid-added diets, respectively) than sows fed the control diet. The balance of EFA was computed as apparent ileal digestible intake of EFA minus the outflow of EFA in milk. For sows fed the control diet, the amount of linoleic acid secreted in milk was greater than the amount consumed, throughout lactation. This resulted in a pronounced negative balance of linoleic acid (-22.4, -38.0, and -14.1 g/d for d 3, 10, and 17 of lactation, respectively). In Exp. 2, 50 sows, equally balanced by parity and nursing 12 pigs, were randomly assigned to a 2 × 2 factorial arrangement of diets plus a control diet without added lipids. Factors included linoleic acid (2.1% and 3.3%) and α-linolenic acid (0.15% and 0.45%). The different concentrations of EFA were obtained by adding 4% of different mixtures of canola, corn, and flaxseed oils to diets. The n-6 to n-3 fatty acid ratios in the diets ranged from 5 to 22. Increasing supplemental EFA increased (P < 0.001) milk concentrations of linoleic (16.7% and 20.8%, for 2.1% and 3.3% linoleic acid, respectively) and α-linolenic acid (P < 0.001; 1.1 and 1.9% for 0.15 and 0.45% α-linolenic acid, respectively). Increasing supplemental EFA increased the estimated balance of α-linolenic acid (P < 0.001; -0.2 and 5.3 g/d for 0.15% and 0.45% α-linolenic acid, respectively), but not linoleic acid (P = 0.14; -3.4 and 10.0 g/d for 2.1% and 3.3% linoleic acid, respectively). In conclusion, lipid supplementation to sow lactation diets improved milk fat secretion. The fatty acid composition of milk fat reflected the dietary supplementation of EFA. The net effect of supplemental EFA was to create a positive balance during lactation, which may prove to be beneficial for the development of nursing piglets and the subsequent reproduction of sows.

Deformation and Plateau Region of Functionally Graded Aluminum Foam by Amount Combinations of Added Blowing Agent.

PubMed

Hangai, Yoshihiko; Utsunomiya, Takao; Kuwazuru, Osamu; Kitahara, Soichiro; Yoshikawa, Nobuhiro

2015-10-21

Recently, to further improve the performance of aluminum foam, functionally graded (FG) aluminum foams, whose pore structure varies with their position, have been developed. In this study, three types of FG aluminum foam of aluminum alloy die casting ADC12 with combinations of two different amounts of added blowing agent titanium(II) hydride (TiH₂) powder were fabricated by a friction stir welding (FSW) route precursor foaming method. The combinations of 1.0-0 mass %, 0.4-0 mass %, and 0.2-0 mass % TiH₂ were selected as the amounts of TiH₂ relative to the mass of the volume stirred by FSW. The static compression tests of the fabricated FG aluminum foams were carried out. The deformation and fracture of FG aluminum foams fundamentally started in the high-porosity (with TiH₂ addition) layer and shifted to the low-porosity (without TiH₂ addition) layer. The first and second plateau regions in the relationship between compressive stress and strain independently appeared with the occurrence of deformations and fractures in the high- and low-porosity layers. It was shown that FG aluminum foams, whose plateau region varies in steps by the combination of amounts of added TiH₂ ( i.e. , the combination of pore structures), can be fabricated.

Exploring the Potential of Value-Added Performance Measures to Affect the Quality of the Teacher Workforce

ERIC Educational Resources Information Center

Goldhaber, Dan

2015-01-01

The past decade has seen a tremendous amount of research on the use of value-added modeling to assess individual teachers, and a significant number of states and districts are now using, or plan to use, value added as a component of a teacher's summative performance evaluation. In this article, I explore the various mechanisms through which the…

Preparation of well-adhered γ-Al 2O 3 washcoat on metallic wire mesh monoliths by electrophoretic deposition

NASA Astrophysics Data System (ADS)

Sun, Hong; Quan, Xie; Chen, Shuo; Zhao, Huimin; Zhao, Yazhi

2007-01-01

Washcoat deposited on metallic wire mesh monoliths was prepared using γ-alumina powders by electrophoretic deposition under a relatively low electric voltage. The microstructure, phase structure and adhesion of washcoat were investigated by SEM, XRD, ultrasonic vibration and thermal shock. The results showed that the loading and adhesion of washcoat were affected obviously by the properties of suspension, such as the zeta potential and the amount of adding binders. A small quantity of aluminum isopropoxide could promote the cohesive affinity of washcoat in thermal shock. The adhesion of washcoat in ultrasonic vibration could be reinforced by increasing calcined temperature and adding a certain aluminum particles. It was also found that the washcoat immersed metal nitrate has excellent vibration-resistant ability.

A New Decision Tree to Solve the Puzzle of Alzheimer's Disease Pathogenesis Through Standard Diagnosis Scoring System.

PubMed

Kumar, Ashwani; Singh, Tiratha Raj

2017-03-01

Alzheimer's disease (AD) is a progressive, incurable and terminal neurodegenerative disorder of the brain and is associated with mutations in amyloid precursor protein, presenilin 1, presenilin 2 or apolipoprotein E, but its underlying mechanisms are still not fully understood. Healthcare sector is generating a large amount of information corresponding to diagnosis, disease identification and treatment of an individual. Mining knowledge and providing scientific decision-making for the diagnosis and treatment of disease from the clinical dataset are therefore increasingly becoming necessary. The current study deals with the construction of classifiers that can be human readable as well as robust in performance for gene dataset of AD using a decision tree. Models of classification for different AD genes were generated according to Mini-Mental State Examination scores and all other vital parameters to achieve the identification of the expression level of different proteins of disorder that may possibly determine the involvement of genes in various AD pathogenesis pathways. The effectiveness of decision tree in AD diagnosis is determined by information gain with confidence value (0.96), specificity (92 %), sensitivity (98 %) and accuracy (77 %). Besides this functional gene classification using different parameters and enrichment analysis, our finding indicates that the measures of all the gene assess in single cohorts are sufficient to diagnose AD and will help in the prediction of important parameters for other relevant assessments.

Study of helium embrittlement in boron doped EUROFER97 steels

NASA Astrophysics Data System (ADS)

Gaganidze, E.; Petersen, C.; Aktaa, J.

2009-04-01

To simulate helium effects in Reduced Activation Ferritic/Martensitic steels, experimental heats ADS2, ADS3 and ADS4 with the basic composition of EUROFER97 (9%Cr-WVTa) were doped with different contents of natural boron and separated 10B-isotope (0.008-0.112 wt.%) and irradiated in High Flux Reactor (HFR) Petten up to 16.3 dpa at 250-450 °C and in Bor-60 fast reactor in Dimitrovgrad up to 31.8 dpa at 332-338 °C. The embrittlement and hardening are investigated by instrumented Charpy-V tests with subsize specimens. Complete burn-up of 10B isotope under neutron irradiation in HFR Petten led to generation of 84, 432 and 5580 appm He and partial boron-to-helium transformation in Bor-60 led to generation of 9, 46, 880 appm He in ADS2, ADS3 and ADS4 heats, respectively. At low irradiation temperatures Tirr ⩽ 340 °C the boron doped steels show progressive embrittlement with increasing helium amount. Irradiation induced DBTT shift of EUROFER97 based heat doped with 1120 wppm separated 10B isotope could not be quantified due to large embrittlement found in the investigated temperature range. At Tirr ⩽ 340 °C helium induced extra embrittlement is attributed to material hardening induced by helium bubbles and described in terms of phenomenological model.

Sick Leave and Factors Influencing Sick Leave in Adult Patients with Atopic Dermatitis: A Cross-Sectional Study

PubMed Central

van Os-Medendorp, Harmieke; Appelman-Noordermeer, Simone; Bruijnzeel-Koomen, Carla; de Bruin-Weller, Marjolein

2015-01-01

Background: Little is known about the prevalence of sick leave due to atopic dermatitis (AD). The current literature on factors influencing sick leave is mostly derived from other chronic inflammatory diseases. This study aimed to determine the prevalence of sick leave due to AD and to identify influencing factors. Methods: A cross-sectional study was carried out in adult patients with AD. Outcome measures: sick leave during the two-week and one-year periods, socio-demographic characteristics, disease severity, quality of life and socio-occupational factors. Logistic regression analyses were used to determine influencing factors on sick leave over the two-week period. Results: In total, 253 patients were included; 12% of the patients had to take sick leave in the last two weeks due to AD and 42% in the past year. A higher level of symptom interference (OR 1.26; 95% CI 1.13–1.40) or perfectionism/diligence (OR 0.90; 95% CI 0.83–0.96) may respectively increase or decrease the number of sick leave days. Conclusion: Sick leave in patients with AD is a common problem and symptom interference and perfectionism/diligence appeared to influence it. Novel approaches are needed to deal with symptoms at work or school to reduce the amount of sick leave due to AD. PMID:26239345

Neuropsychological mechanisms of Digit Symbol Substitution Test impairment in Asperger Disorder.

PubMed

Yoran-Hegesh, Roni; Kertzman, Semion; Vishne, Tali; Weizman, Abraham; Kotler, Moshe

2009-03-31

Our aim was to investigate the neurocognitive mechanisms recruited by adolescents with Asperger Disorder (AD), in comparison to controls, and to detect the underlying mechanisms during the complex information processing required for the performance of the Digit Symbol Substitution Test (DSST). Male adolescents (n=23; mean age 15.1+/-3.6 years) with a DSM-IV diagnosis of AD were compared with a normal male control group with similar demographic characteristics (n=43; mean age: 15.1+/-3.6 years). A computerized neurocognitive battery was administered and included: Inspection Time (IT), Finger Tapping Test (FTT), Simple Reaction Time (SRT), Choice Reaction Time (CRT), Digit Running task (DRT), Stroop test and Digit Symbol Substitution Test (DSST). Adolescents with AD performed significantly worse than controls on the DSST. This impaired DSST performance was related to cognitive mechanisms different from those employed by normal controls. Motor slowness and inability to deal with increased amounts of information affected the performance of the AD group, while shifting of attention was the limiting factor in the controls. Both groups were similarly dependent on response selection. This study demonstrated differences in performance in complex cognitive tasks between adolescents with AD and normal controls that may be related to differences in neurocognitive mechanisms underlying information processing. Future neuroimaging studies are needed to clarify the neural network involved in the differences in cognitive performance between AD subjects and normal controls.

Direct trust-based security scheme for RREQ flooding attack in mobile ad hoc networks

NASA Astrophysics Data System (ADS)

Kumar, Sunil; Dutta, Kamlesh

2017-06-01

The routing algorithms in MANETs exhibit distributed and cooperative behaviour which makes them easy target for denial of service (DoS) attacks. RREQ flooding attack is a flooding-type DoS attack in context to Ad hoc On Demand Distance Vector (AODV) routing protocol, where the attacker broadcasts massive amount of bogus Route Request (RREQ) packets to set up the route with the non-existent or existent destination in the network. This paper presents direct trust-based security scheme to detect and mitigate the impact of RREQ flooding attack on the network, in which, every node evaluates the trust degree value of its neighbours through analysing the frequency of RREQ packets originated by them over a short period of time. Taking the node's trust degree value as the input, the proposed scheme is smoothly extended for suppressing the surplus RREQ and bogus RREQ flooding packets at one-hop neighbours during the route discovery process. This scheme distinguishes itself from existing techniques by not directly blocking the service of a normal node due to increased amount of RREQ packets in some unusual conditions. The results obtained throughout the simulation experiments clearly show the feasibility and effectiveness of the proposed defensive scheme.

Effect of Multiwalled Carbon Nanotubes on the Mechanical Properties of Carbon Fiber-Reinforced Polyamide-6/Polypropylene Composites for Lightweight Automotive Parts.

PubMed

Nguyen-Tran, Huu-Duc; Hoang, Van-Tho; Do, Van-Ta; Chun, Doo-Man; Yum, Young-Jin

2018-03-15

The development of lightweight automotive parts is an important issue for improving the efficiency of vehicles. Polymer composites have been widely applied to reduce weight and improve mechanical properties by mixing polymers with carbon fibers, glass fibers, and carbon nanotubes. Polypropylene (PP) has been added to carbon fiber-reinforced nylon-6 (CF/PA6) composite to achieve further weight reduction and water resistance. However, the mechanical properties were reduced by the addition of PP. In this research, multiwalled carbon nanotubes (CNTs) were added to compensate for the reduced mechanical properties experienced when adding PP. Tensile testing and bending tests were carried out to evaluate the mechanical properties. A small amount of CNTs improved the mechanical properties of carbon fiber-reinforced PA6/PP composites. For example, the density of CF/PA6 was reduced from 1.214 to 1.131 g/cm³ (6.8%) by adding 30 wt % PP, and the tensile strength of 30 wt % PP composite was improved from 168 to 173 MPa (3.0%) by adding 0.5 wt % CNTs with small increase of density (1.135 g/cm³). The developed composite will be widely used for lightweight automotive parts with improved mechanical properties.

Effect of Multiwalled Carbon Nanotubes on the Mechanical Properties of Carbon Fiber-Reinforced Polyamide-6/Polypropylene Composites for Lightweight Automotive Parts

PubMed Central

Nguyen-Tran, Huu-Duc; Do, Van-Ta; Yum, Young-Jin

2018-01-01

The development of lightweight automotive parts is an important issue for improving the efficiency of vehicles. Polymer composites have been widely applied to reduce weight and improve mechanical properties by mixing polymers with carbon fibers, glass fibers, and carbon nanotubes. Polypropylene (PP) has been added to carbon fiber-reinforced nylon-6 (CF/PA6) composite to achieve further weight reduction and water resistance. However, the mechanical properties were reduced by the addition of PP. In this research, multiwalled carbon nanotubes (CNTs) were added to compensate for the reduced mechanical properties experienced when adding PP. Tensile testing and bending tests were carried out to evaluate the mechanical properties. A small amount of CNTs improved the mechanical properties of carbon fiber-reinforced PA6/PP composites. For example, the density of CF/PA6 was reduced from 1.214 to 1.131 g/cm3 (6.8%) by adding 30 wt % PP, and the tensile strength of 30 wt % PP composite was improved from 168 to 173 MPa (3.0%) by adding 0.5 wt % CNTs with small increase of density (1.135 g/cm3). The developed composite will be widely used for lightweight automotive parts with improved mechanical properties. PMID:29543754

Climate change consequences for terrestrial ecosystem processes in NW Greeland: Results from the High Arctic Biocomplexity project

NASA Astrophysics Data System (ADS)

Welker, J. M.; Sullivan, P.; Rogers, M.; Sharp, E. D.; Sletten, R.; Burnham, J. L.; Hallet, B.; Hagedorn, B.; Czimiczk, C.

2009-12-01

Greenland is experiencing some of the fastest rates of climate warming across the Arctic including warmer summers and increases in snow fall. The effects of these new states of Greenland are however, uncertain especially for carbon, nitrogen and water biogeochemical processes, soil traits, vegetation growth patterns, mineral nutrition and plant ecophysiological processes. Since 2003 we have conducted a suite of observational and experimental measurements that have been designed to understand the fundamental nature of polar desert, polar semi-desert and fen landscapes in NW Greenland. In addition, we have established a suite of experiments to ascertain ecosystem responses to warming at multiple levels (~2030 and 2050), in conjunction with added summer rain; the consequences of added snow fall (ambient, intermediate and deep) and the effects of increases in nutrient additions (added N, P and N+P), which represent extreme warming conditions. We find that: a) the soil C pools are 6-fold larger than previously measured, b) extremely old C (up to ~30k bp) which has been buried by frost cracking and frost heaving is reaching the modern atmosphere, but in only trace amounts as measured by respired 14CO2, c) warming that simulates 2030, has only a small effect on net C sequestration but warming that simulates 2050 when combined with added summer rain, increases C sequestration by 300%, d) increases in N deposition almost immediately and completely changes the vegetation composition of polar semi-deserts shifting the NDVI values from 0.2 to 0.5 within 2 years. Our findings depict a system that is poised to contribute stronger feedbacks than previously expected as climates in NW Greenland change.

Post-anaerobic digestion thermal hydrolysis of sewage sludge and food waste: Effect on methane yields, dewaterability and solids reduction.

PubMed

Svensson, Kine; Kjørlaug, Oda; Higgins, Matthew J; Linjordet, Roar; Horn, Svein J

2018-04-01

Post-anaerobic digestion (PAD) treatment technologies have been suggested for anaerobic digestion (AD) to improve process efficiency and assure hygenization of organic waste. Because AD reduces the amount of organic waste, PAD can be applied to a much smaller volume of waste compared to pre-digestion treatment, thereby improving efficiency. In this study, dewatered digestate cakes from two different AD plants were thermally hydrolyzed and dewatered, and the liquid fraction was recirculated to a semi-continuous AD reactor. The thermal hydrolysis was more efficient in relation to methane yields and extent of dewaterability for the cake from a plant treating waste activated sludge, than the cake from a plant treating source separated food waste (SSFW). Temperatures above 165 °C yielded the best results. Post-treatment improved volumetric methane yields by 7% and the COD-reduction increased from 68% to 74% in a mesophilic (37 °C) semi-continuous system despite lowering the solid retention time (from 17 to 14 days) compared to a conventional system with pre-treatment of feed substrates at 70 °C. Results from thermogravimetric analysis showed an expected increase in maximum TS content of dewatered digestate cake from 34% up to 46% for the SSFW digestate cake, and from 17% up to 43% in the sludge digestate cake, after the PAD thermal hydrolysis process (PAD-THP). The increased dewatering alone accounts for a reduction in wet mass of cake leaving the plant of 60% in the case of sludge digestate cake. Additionaly, the increased VS-reduction will contribute to further reduce the mass of wet cake. Copyright © 2018 Elsevier Ltd. All rights reserved.

Anti-endotoxic and antibacterial effects of a dermal substitute coated with host defense peptides.

PubMed

Kasetty, Gopinath; Kalle, Martina; Mörgelin, Matthias; Brune, Jan C; Schmidtchen, Artur

2015-01-01

Biomaterials used during surgery and wound treatment are of increasing importance in modern medical care. In the present study we set out to evaluate the addition of thrombin-derived host defense peptides to human acellular dermis (hAD, i.e. epiflex(®)). Antimicrobial activity of the functionalized hAD was demonstrated using radial diffusion and viable count assays against Gram-negative Escherichia coli, Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus bacteria. Electron microscopy analyses showed that peptide-mediated bacterial killing led to reduced hAD degradation. Furthermore, peptide-functionalized hAD displayed endotoxin-binding activity in vitro, as evidenced by inhibition of NF-κB activation in human monocytic cells (THP-1 cells) and a reduction of pro-inflammatory cytokine production in whole blood in response to lipopolysaccharide stimulation. The dermal substitute retained its anti-endotoxic activity after washing, compatible with results showing that the hAD bound a significant amount of peptide. Furthermore, bacteria-induced contact activation was inhibited by peptide addition to the hAD. E. coli infected hAD, alone, or after treatment with the antiseptic substance polyhexamethylenebiguanide (PHMB), yielded NF-κB activation in THP-1 cells. The activation was abrogated by peptide addition. Thus, thrombin-derived HDPs should be of interest in the further development of new biomaterials with combined antimicrobial and anti-endotoxic functions for use in surgery and wound treatment. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Effects of hydrolysis of milk glycerides on the antimutagenicity of a hexane extract of milk.

PubMed

Nadathur, S R; Zhou, L; Lowry, R R; Bakalinsky, A T

1998-03-01

Reconstituted nonfat dry milk was treated with different amounts of lipase from Pseudomonas fluorescens. Hexane extracts of treated milks were dissolved in dimethylsulfoxide and assayed for antimutagenicity using the Ames test (Salmonella typhimurium TA 100) against N-methyl, N'-nitro, N-nitrosoguanidine. Anti-N-methyl, N'-nitro, N-nitrosoguanidine activity increased significantly as the amount of added lipase increased. At the highest lipase concentration tested, activity increased 5-fold, suggesting that liberated fatty acids contributed to the increased antimutagenicity. The activities of mixtures of pure fatty acids on antimutagenesis were examined using the Ames test. At the lowest concentrations tested, mixtures of palmitic and stearic acids and mixtures of palmitic and isopalmitic acids exhibited greater activity than did the individual acids. At all doses tested, mixtures of the monoacylglycerides of palmitic and stearic acids exhibited the same activity as the individual components. Quantification of fatty acids in milk and yogurt by gas chromatography indicated a 2 to 20-fold greater content of free fatty acids in yogurt. The increase in free fatty acids may contribute to the increase in antimutagenicity of yogurt relative to that of milk.

7 CFR 1980.391 - Equity sharing.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., principal reduction, and value added by any capital improvements. (i) Market value. Market value of the... amount of the insurance payment is generally a good indication of value; however, tax records or... exceed market value contribution as indicated by a sales comparison analysis. Generally, the value added...

7 CFR 1980.391 - Equity sharing.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., principal reduction, and value added by any capital improvements. (i) Market value. Market value of the... amount of the insurance payment is generally a good indication of value; however, tax records or... exceed market value contribution as indicated by a sales comparison analysis. Generally, the value added...

7 CFR 1980.391 - Equity sharing.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., principal reduction, and value added by any capital improvements. (i) Market value. Market value of the... amount of the insurance payment is generally a good indication of value; however, tax records or... exceed market value contribution as indicated by a sales comparison analysis. Generally, the value added...

7 CFR 1980.391 - Equity sharing.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., principal reduction, and value added by any capital improvements. (i) Market value. Market value of the... amount of the insurance payment is generally a good indication of value; however, tax records or... exceed market value contribution as indicated by a sales comparison analysis. Generally, the value added...

7 CFR 1980.391 - Equity sharing.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., principal reduction, and value added by any capital improvements. (i) Market value. Market value of the... amount of the insurance payment is generally a good indication of value; however, tax records or... exceed market value contribution as indicated by a sales comparison analysis. Generally, the value added...

40 CFR 80.74 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., oxygenate blender, carrier, distributor, reseller, retailer, or wholesale-purchaser who sells, offers for... reformulated gasoline or RBOB recovered from transmix and the type and amount of any blendstock added, if... (iii) The volume, type, and purity of the oxygenate which was added, and documents which show the...

Economic benefit analysis of cultivating Pleurotus ostreatus with rape straw

NASA Astrophysics Data System (ADS)

Guan, Qinlan; Gong, Mingfu; Tang, Mei

2018-04-01

The cultivation of Pleurotus ostreatus with rape straw not only can save the cultivation cost of P. ostreatus, but also can reuse the resources and protect the environment. By adding different proportion of rape straw to the cultivation material of P. ostreatus, the reasonable amount of rape straw was selected and the economic benefit of P. ostreatus cultivated with the optimum amount of rape straw was analyzed. The results showed that adding 10% to 40% rape straw to the cultivation material of P. ostreatus did not affect the yield and biological conversion rate of P. ostreatus, and the ratio of production and investment of the amount of rape straw in the range of 10% to 50% was higher than of cottonseed husk alone as the main material of the formula.

Polyimide Film of Increased Tear Strength

NASA Technical Reports Server (NTRS)

St. Clair, A. K.; Hinkley, J. A.; Ezzell, S. A.

1986-01-01

High-temperature linear aromatic polyimide with improved resistance to tearing made by new process that incorporates elastomer into polyimide. Linear aromatic condensation polyimides are materials of prime choice for use as films and coatings on advanced spacecraft and aircraft where durability at temperatures in range of 200 to 300 degree C required. Elastomer-containing polyimide film with improved toughness proves useful for applications where resistance to tearing and long-term thermal stability necessary. Desired resistance to tearing achieved by careful control of amount and chemical composition of added elastomer.

An Analysis of the President’s Budgetary Proposals for Fiscal Year 2007

DTIC Science & Technology

2006-03-01

and added that amount to the models ’ underlying esti- mates of the effect on output. The procedure phased in an increase in gross national product ...Bottles: A Meta-Analysis of Ricardian Equivalence,” Southern Economic Journal, vol. 64, no. 3 (January 1998), pp. 713-727. APPENDIX C THE MODELS USED...Economy 29 A Description of the Models Used by CBO and Their Results 36 A Changes to CBO’s Baseline Since January 2006 45 B The Potential Economic

Halogenated volatile organic compounds in chlorine-bleach-containing household products and implications for their use

NASA Astrophysics Data System (ADS)

Odabasi, Mustafa; Elbir, Tolga; Dumanoglu, Yetkin; Sofuoglu, Sait C.

2014-08-01

It was recently shown that substantial amounts of halogenated volatile organic compounds (VOCs) are formed in chlorine-bleach-containing household products as a result of reactions of sodium hypochlorite with organic product components. Use of these household products results in elevated indoor air halogenated VOC concentrations. Halogenated VOCs in several chlorine-bleach-containing household products (plain, n = 9; fragranced, n = 4; and surfactant-added, n = 29) from Europe and North America were measured in the present study. Chloroform and carbon tetrachloride were the dominating compounds having average concentrations of 9.5 ± 29.0 (average ± SD) and 23.2 ± 44.3 (average ± SD) mg L-1, respectively. Halogenated VOC concentrations were the lowest in plain bleach, slightly higher in fragranced products and the highest in the surfactant-added products. Investigation of the relationship between the halogenated VOCs and several product ingredients indicated that chlorinated VOC formation is closely related to product composition. Indoor air concentrations from the household use of bleach products (i.e., bathroom, kitchen, and hallway cleaning) were estimated for the two dominating VOCs (chloroform and carbon tetrachloride). Estimated indoor concentrations ranged between 0.5 and 1030 (34 ± 123, average ± SD) μg m-3 and 0.3-1124 (82 ± 194, average ± SD) μg m-3 for chloroform and carbon tetrachloride, respectively, indicating substantial increases compared to background. Results indicated that indoor air concentrations from surfactant-added products were significantly higher (p < 0.01) than other categories. The highest concentrations were from the use of surfactant-added bleach products for bathroom cleaning (92 ± 228 and 224 ± 334 μg m-3, average ± SD for chloroform and carbon tetrachloride, respectively). Associated carcinogenic risks from the use of these products were also estimated. The risk levels may reach to considerably high levels for a significant portion of the population especially for those steadily using the surfactant-added bleach products. Based on the results of the present study, it could be recommended that if possible the use of chlorine bleach containing household products should be avoided. If they are to be used, plain products should be preferred since the chlorinated VOC content increase with the number and amount of additives.

[Effect of surface organic modified nano-silicon-oxide on mechanical properties of A-2186 silicone elastomers].

PubMed

Guo, Nan; Jiao, Ting

2011-08-01

To study the effect of surface organic modified nano-silicon-oxide (SiO(x)) on mechanical properties of A-2186 silicone elastomers. Surface organic modified nano-silicon-oxide (SiO(x)) was added into A-2186 silicone elastomers by weight percentage of 2%, 4% and 6%. The one without addition served as a control. Standard specimens were made according to American Society for Testing Materials (ASTM). Their tensile strength, elongation at break, tear strength, and Shore A hardness were measured. The results were analyzed statistically by SPSS 10.0 software package. The tensile strength in the experimental groups was significantly lower than the control group (P<0.001).The elongation in the experimental groups was lower than the control group, but there was no significant difference between the 2wt% group and the control group (P=0.068). The tear strength in both the 2wt= group and 4wt= group were higher than the control group, and the difference was statistically significant; in addition, the tear strength in 2wt= group was higher than 4wt= group, which also showed statistical significance (P<0.001). With the increase of the added amount of surface modified nano-SiO(x), Shore A hardness increased and there was significant difference among them (P<0.001). Adding surface modified nano-SiO(x) has an effect on mechanical properties of A-2186 silicone elastomer, when 2wt= and 4wt= are added, tear strength of A-2186 improves significantly, with an increase of Shore A hardness and an decrease of tensile strength.

PCA as a practical indicator of OPLS-DA model reliability.

PubMed

Worley, Bradley; Powers, Robert

Principal Component Analysis (PCA) and Orthogonal Projections to Latent Structures Discriminant Analysis (OPLS-DA) are powerful statistical modeling tools that provide insights into separations between experimental groups based on high-dimensional spectral measurements from NMR, MS or other analytical instrumentation. However, when used without validation, these tools may lead investigators to statistically unreliable conclusions. This danger is especially real for Partial Least Squares (PLS) and OPLS, which aggressively force separations between experimental groups. As a result, OPLS-DA is often used as an alternative method when PCA fails to expose group separation, but this practice is highly dangerous. Without rigorous validation, OPLS-DA can easily yield statistically unreliable group separation. A Monte Carlo analysis of PCA group separations and OPLS-DA cross-validation metrics was performed on NMR datasets with statistically significant separations in scores-space. A linearly increasing amount of Gaussian noise was added to each data matrix followed by the construction and validation of PCA and OPLS-DA models. With increasing added noise, the PCA scores-space distance between groups rapidly decreased and the OPLS-DA cross-validation statistics simultaneously deteriorated. A decrease in correlation between the estimated loadings (added noise) and the true (original) loadings was also observed. While the validity of the OPLS-DA model diminished with increasing added noise, the group separation in scores-space remained basically unaffected. Supported by the results of Monte Carlo analyses of PCA group separations and OPLS-DA cross-validation metrics, we provide practical guidelines and cross-validatory recommendations for reliable inference from PCA and OPLS-DA models.

The effect of interferon on the receptor sites to rabies virus on mouse neuroblastoma cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Briggs, D.J.

1989-01-01

The binding of rabies virus to mouse neuroblastoma cells (MNA) primed with alpha interferon (IFN-{alpha}), beta interferon (IFN-{beta}), or alpha bungarotoxin (BTX) was examined. A saturable number of receptor sites to rabies virus was calculated by increasing the amount of {sup 3}H-CVS added to a constant number of untreated MNA cells. MNA cells were then exposed to 20 I.U. of IFN-{alpha}, IFN-{beta}, or 1 {mu}g of BTX and assayed to determine if these treatments had an effect on the number of receptor sites to rabies virus. Total amount of {sup 3}H-CVS bound to MNA cells was determined during a threemore » hour incubation period. Cold competition assays using 1,000 fold excess unlabeled CVS were used to determine non-specific binding for each treatment. Specific binding was then calculated by subtracting non-specific binding from the total amount of CVS bound to MNA cells. A similar amount of total viral protein bound to untreated and IFN-{beta}, and BTX treated cells after 180 minutes of incubation. The bound protein varied by only 0.07 {mu}g. However, the amount of specific and non-specific binding varied a great deal between treatments. BTX caused an increase in non-specific and a decrease in specific binding of rabies virus. IFN-{beta} produced variable results in non-specific and specific binding while IFN-{alpha} caused mainly specific binding to occur. The most significant change brought about by IFN-{alpha} was an increase in the rate of viral attachment. At 30 minutes post-infection, IFN-{alpha} treated cells had bound 90% of the total amount of virus bound to untreated cells after 180 minutes. The increased binding rate did not cause a productive infection of rabies virus. No viral production was evident after an incubation period of 48 hours in either IFN-{alpha} or IFN-{beta} treated cells.« less

Effect of lavender (Lavandula angustifolia) and melissa (Melissa Officinalis) waste on quality and shelf life of bread.

PubMed

Vasileva, Ivelina; Denkova, Rositsa; Chochkov, Rosen; Teneva, Desislava; Denkova, Zapryana; Dessev, Tzvetelin; Denev, Petko; Slavov, Anton

2018-07-01

The effect of lavender (Lavandula angustifolia) and melissa (Melissa Officinalis) waste on preparation, characteristics and shelf life of bread was investigated. It was found that lavender and melissa waste, generated yearly in large amounts, were rich on polyphenols (especially rosmarinic acid) and aroma compounds, and exhibited high antioxidant and antimicrobial activity. The bread with 2.5% lavender waste was characterized with the highest loaf volume and loaf specific volume. The total dietary fiber increased three times and the polyphenols and flavonoids increased more than four times for breads with added 5% lavender and melissa waste, compared to control sample. The breads with 2.5% and 5% added lavender waste had increased shelf life (up to 96 h) compared to control, and no fungal or bacterial spoilage was observed during storage at 22 °C, 30 °C and 37 °C for four days. The sensory evaluation demonstrated that the consumers preferred mainly bread with 2.5% lavender waste. Copyright © 2018 Elsevier Ltd. All rights reserved.

The effect of chaya (Cnidoscolus aconitifolius) leaf meal and of exogenous enzymes on amino acid digestibility in broilers.

PubMed

Sarmiento-Franco, L; McNab, J M; Pearson, A; Belmar-Casso, R

2003-07-01

1. The apparent ileal nitrogen (N) and amino acid digestibilities in chaya leaf meal (CLM) (Cnidoscolus aconitifolius) with added enzymes, and the same variables in diets containing different amounts of CLM were studied in chickens. 2. In the first experiment pectinase, beta-glucanase, and pectinase + beta-glucanase were added to CLM. In the second experiment, there were three diets based on maize and soybean: 0, 150 and 250 g/kg CLM. 3. Pectinase significantly increased both lysine and overall amino acid digestibilities in CLM. 4. In experiment 2, the amino acid digestibility in birds fed on CLM250 was lower than that from birds fed on either control or CLM150. Only the digestibilities of alanine, arginine and proline were lower in birds fed on CLM150 than in those fed on the control diet. Nitrogen digestibility was lower in birds fed on the CLM250 diet than on either control or CLM150 diets. These findings were attributed to the increasing concentration of fibre with increasing dietary CLM.

75 FR 21241 - Certain Cut-to-Length Carbon Steel Plate from the People's Republic of China: Initiation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... steel plate from PRC producers containing small amounts of boron resulting in the classification of the... Iron and Steel Co., Ltd. and/ or imported by Toyota Tsusho America with small amounts of boron added... to add insignificant amounts of boron to their steel products for the purpose of securing a higher...

Effect of Chitin Isolated from Crustaceans and Cephalopods on Denaturation of Fish Myofibrillar Protein and the State of Water during Frozen Storage

NASA Astrophysics Data System (ADS)

Arredondo Romero, Eduardo; Nakamura, Yukio; Yamashita, Yasumitsu; Ichikawa, Hisashi; Goto, Shingi; Osatomi, Kiyoshi; Nozaki, Yukinori

From the point of view of utilization of shells as a waste product of fishery industry, the cryoprotective effect of chitin made from shell of crustaceans (Japanese fan lobster and Japanese swimming crab) and cartilage of cephalopods (spear squid) are studied. Chitin from the shells and cartilage were added to lizard fish myofibrils, and the changes of unfrozen water in myofibrils and ATPase activity of myofibrillar protein were observed during frozen storage at -250°C for 120days. The amount of unfrozen water were increased by addition of three kinds of chitin, and decreased moderately during forzen storage. Whereas, in the chitin free sample, the amount of unfrozen water were decreased rapidly during frozen storage. Changes of ATPase activity of samples showed similar tendency to that of the amount of unfrozen water. The present moderate cryoprotective effect of chitin and data of unfrozen water and ATPase activity of myofibrillar protein suggest the importance of the amount of unfrozen water in frozen matrix.

The effect of particle size and amount of inoculum on fungal treatment of wheat straw and wood chips.

PubMed

van Kuijk, Sandra J A; Sonnenberg, Anton S M; Baars, Johan J P; Hendriks, Wouter H; Cone, John W

2016-01-01

The aim of this study was to optimize the fungal treatment of lignocellulosic biomass by stimulating the colonization. Wheat straw and wood chips were treated with Ceriporiopsis subvermispora and Lentinula edodes with various amounts of colonized millet grains (0.5, 1.5 or 3.0 % per g of wet weight of substrate) added to the substrates. Also, wheat straw and wood chips were chopped to either 0.5 or 2 cm. Effectiveness of the fungal treatment after 0, 2, 4, 6, or 8 wk of incubation was determined by changes in chemical composition, in vitro gas production (IVGP) as a measure for rumen degradability, and ergosterol content as a measure of fungal biomass. Incomplete colonization was observed for C. subvermispora treated wheat straw and L. edodes treated wood chips. The different particle sizes and amounts of inoculum tested, had no significant effects on the chemical composition and the IVGP of C. subvermispora treated wood chips. Particle size did influence L. edodes treatment of wheat straw. The L. edodes treatment of 2 cm wheat straw resulted in a more selective delignification and a higher IVGP than the smaller particles. Addition of 1.5 % or 3 % L. edodes inoculum to wheat straw resulted in more selective delignification and a higher IVGP than addition of 0.5 % inoculum. Particle size and amount of inoculum did not have an effect on C. subvermispora treatment of wood chips. At least 1.5 % L. edodes colonized millet grains should be added to 2 cm wheat straw to result in an increased IVGP and acid detergent lignin (ADL) degradation.

A Mathematical Relationship for Hydromorphone Loading into Liposomes with Trans-Membrane Ammonium Sulfate Gradients

PubMed Central

TU, SHENG; MCGINNIS, TAMARA; KRUGNER-HIGBY, LISA; HEATH, TIMOTHY D.

2014-01-01

We have studied the loading of the opioid hydromorphone into liposomes using ammonium sulfate gradients. Unlike other drugs loaded with this technique, hydromorphone is freely soluble as the sulfate salt, and, consequently, does not precipitate in the liposomes after loading. We have derived a mathematical relationship that can predict the extent of loading based on the ammonium ion content of the liposomes and the amount of drug added for loading. We have adapted and used the Berthelot indophenol assay to measure the amount of ammonium ions in the liposomes. Plots of the inverse of the fraction of hydromorphone loaded versus the amount of hydromorphone added are linear, and the slope should be the inverse of the amount of ammonium ions present in the liposomes. The inverse of the slopes obtained closely correspond to the amount of ammonium ions in the liposomes measured with the Berthelot indophenol assay. We also show that loading can be less than optimal under conditions where osmotically driven loss of ammonium ions or leakage of drug after loading may occur. PMID:20014429

A mathematical relationship for hydromorphone loading into liposomes with trans-membrane ammonium sulfate gradients.

PubMed

Tu, Sheng; McGinnis, Tamara; Krugner-Higby, Lisa; Heath, Timothy D

2010-06-01

We have studied the loading of the opioid hydromorphone into liposomes using ammonium sulfate gradients. Unlike other drugs loaded with this technique, hydromorphone is freely soluble as the sulfate salt, and, consequently, does not precipitate in the liposomes after loading. We have derived a mathematical relationship that can predict the extent of loading based on the ammonium ion content of the liposomes and the amount of drug added for loading. We have adapted and used the Berthelot indophenol assay to measure the amount of ammonium ions in the liposomes. Plots of the inverse of the fraction of hydromorphone loaded versus the amount of hydromorphone added are linear, and the slope should be the inverse of the amount of ammonium ions present in the liposomes. The inverse of the slopes obtained closely correspond to the amount of ammonium ions in the liposomes measured with the Berthelot indophenol assay. We also show that loading can be less than optimal under conditions where osmotically driven loss of ammonium ions or leakage of drug after loading may occur. (c) 2009 Wiley-Liss, Inc. and the American Pharmacists Association

Mechanical reinforcement of gelatin hydrogel with nanofiber cellulose as a function of percolation concentration.

PubMed

Wang, Wenhang; Zhang, Xiaowei; Teng, Anguo; Liu, Anjun

2017-10-01

Given a variety of distinguished aspect ratio-related characteristics of nanofiber cellulose (NFC), the impact of NFC on gelatin hydrogel performance involving strength, rheology, microstructure was investigated, focusing on concentration percolation mechanism for it. The inner topography displayed a compact three-dimensional network structure in the NFC-added gelatin gel, however, an NFC amount of 7.5gkg -1 caused more inhomogeneous aggregation. Texture profile analysis showed that the addition of NFC increased the hardness but reduced the elasticity of gelatin gel at 10°C, depending on NFC concentration. For static rheology, adding NFC transformed gelatin solution from the Newtonian action into pseudoplastic behavior at 60°C, with a marked increase of viscosity. Furthermore, NFC improved the temperature of sol-gel transition of gelatin, even no obvious transformation as ≥5gkg -1 NFC used. NFC reinforcement provides the potential to use as texture modifier along with gelatin in food field. Copyright © 2017 Elsevier B.V. All rights reserved.

Method for producing redox shuttles

DOEpatents

Pupek, Krzysztof Z.; Dzwiniel, Trevor L.; Krumdick, Gregory K.

2015-03-03

A single step method for producing a redox shuttle having the formula 2,5-di-tert-butyl-1,4-phenylene tetraethyl bis(phosphate) is provided, the method comprising phosphorylating tert butyl hydroquinone with a phosphate-containing reagent. Also provided is method for producing 2,5-di-tert-butyl-1,4-phenylene tetraethyl bis(phosphate), the method comprising solubilizing tert-butyl hydroquinone and tetrabutylammonium bromide with methyltetrahydrofuran to create a mixture; heating the mixture while adding base to the mixture in an amount to turn the mixture orange; and adding diethyl chlorophosphate to the orange mixture in an amount to phosphorylate the hydroquinone.

Carbon or boron modified titanium silicide

DOEpatents

Thom, A.J.; Akinc, M.

1998-07-14

A titanium silicide material based on Ti{sub 5}Si{sub 3} intermetallic compound exhibits substantially improved oxidative stability at elevated temperatures. In particular, carbon is added to a Ti{sub 5}Si{sub 3} base material in an amount (e.g. about 0.3 to about 3.6 weight % C) effective to impart substantially improved oxidative stability at elevated temperatures, such as about 1000 C. Boron is added to a Ti{sub 5}Si{sub 3} base material in an amount (e.g. about 0.3 to about 3.3 weight % B) to this same end. 3 figs.

Carbon or boron modified titanium silicide

DOEpatents

Thom, A.J.; Akinc, M.

1997-12-02

A titanium silicide material based on Ti{sub 5}Si{sub 3} intermetallic compound exhibits substantially improved oxidative stability at elevated temperatures. In particular, carbon is added to a Ti{sub 5}Si{sub 3} base material in an amount (e.g. about 0.3 to about 3.6 weight % C) effective to impart substantially improved oxidative stability at elevated temperatures, such as about 1000 C. Boron is added to a Ti{sub 5}Si{sub 3} base material in an amount (e.g. about 0.3 to about 3.3 weight % B) to this same end. 3 figs.

Carbon or boron modified titanium silicide

DOEpatents

Thom, Andrew J.; Akinc, Mufit

1996-12-03

A titanium silicide material based on Ti.sub.5 Si.sub.3 intermetallic compound exhibits substantially improved oxidative stability at elevated temperatures. In particular, carbon is added to a Ti.sub.5 Si.sub.3 base material in an amount (e.g. about 0.3 to about 3.6 weight % C) effective to impart substantially improved oxidative stability at elevated temperatures, such as about 1000.degree. C. Boron is added to a Ti.sub.5 Si.sub.3 base material in an amount (e.g. about 0.3 to about 3.3 weight % B) to this same end.

Carbon or boron modified titanium silicide

DOEpatents

Thom, Andrew J.; Akinc, Mufit

1997-12-02

A titanium silicide material based on Ti.sub.5 Si.sub.3 intermetallic compound exhibits substantially improved oxidative stability at elevated temperatures. In particular, carbon is added to a Ti.sub.5 Si.sub.3 base material in an amount (e.g. about 0.3 to about 3.6 weight % C) effective to impart substantially improved oxidative stability at elevated temperatures, such as about 1000.degree. C. Boron is added to a Ti.sub.5 Si.sub.3 base material in an amount (e.g. about 0.3 to about 3.3 weight % B) to this same end.

Carbon or boron modified titanium silicide

DOEpatents

Thom, A.J.; Akinc, M.

1996-12-03

A titanium silicide material based on Ti{sub 5}Si{sub 3} intermetallic compound exhibits substantially improved oxidative stability at elevated temperatures. In particular, carbon is added to a Ti{sub 5}Si{sub 3} base material in an amount (e.g. about 0.3 to about 3.6 weight % C) effective to impart substantially improved oxidative stability at elevated temperatures, such as about 1000 C. Boron is added to a Ti{sub 5}Si{sub 3} base material in an amount (e.g. about 0.3 to about 3.3 weight % B) to this same end. 3 figs.

Carbon or boron modified titanium silicide

DOEpatents

Thom, Andrew J.; Akinc, Mufit

1998-07-14

A titanium silicide material based on Ti.sub.5 Si.sub.3 intermetallic compound exhibits substantially improved oxidative stability at elevated temperatures. In particular, carbon is added to a Ti.sub.5 Si.sub.3 base material in an amount (e.g. about 0.3 to about 3.6 weight % C) effective to impart substantially improved oxidative stability at elevated temperatures, such as about 1000.degree. C. Boron is added to a Ti.sub.5 Si.sub.3 base material in an amount (e.g. about 0.3 to about 3.3 weight % B) to this same end.

Surface preparation effects on GTA weld shape in JBK-75 stainless steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, R.D.; Robertson, A.M.; Heiple, C.R.

1993-02-01

The results of a study are reported here on the effects of surface preparation on the shape of autogenous gas tungsten arc (GTA) welds in JBK-75, an austenitic precipitation hardenable stainless steel similar to A286. Minor changes in surface preparation produced substantial changes in the fusion zone shape and welding behavior of this alloy. Increased and more consistent depth of fusion (higher d/w ratios) along with improved arc stability and less arc wander resulted from wire brushing and other abrasive surface preparations, although chemical and machining methods did not produce any increase in depth of fusion. Abrasive treatments roughen themore » surface, increase the surface area, increase the surface oxide thickness, and entrap oxide. The increased weld d/w ratio is attributed to oxygen added to the weld pool from the surface oxide on the base metal. The added oxygen alters the surface-tension-driven fluid flow pattern in the weld pool. Increased depth of fusion in wire-fed U-groove weld joints also resulted when welding wire with a greater surface oxide thickness was used. Increasing the amount of wire brushing produced even deeper welds. However, a maximum in depth of fusion was observed with further wire brushing, beyond which weld fusion depth decreased.« less

42 CFR 484.215 - Initial establishment of the calculation of the national 60-day episode payment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... visit by the national mean utilization summed in the aggregate for the six disciplines. (4) By adding to the amount derived in paragraph (d)(3) of this section, amounts for nonroutine medical supplies, an...

Estimating added sugars in US consumer packaged goods: An application to beverages in 2007-08.

PubMed

Ng, Shu Wen; Bricker, Gregory; Li, Kuo-Ping; Yoon, Emily Ford; Kang, Jiyoung; Westrich, Brian

2015-11-01

This study developed a method to estimate added sugar content in consumer packaged goods (CPG) that can keep pace with the dynamic food system. A team including registered dietitians, a food scientist and programmers developed a batch-mode ingredient matching and linear programming (LP) approach to estimate the amount of each ingredient needed in a given product to produce a nutrient profile similar to that reported on its nutrition facts label (NFL). Added sugar content was estimated for 7021 products available in 2007-08 that contain sugar from ten beverage categories. Of these, flavored waters had the lowest added sugar amounts (4.3g/100g), while sweetened dairy and dairy alternative beverages had the smallest percentage of added sugars (65.6% of Total Sugars; 33.8% of Calories). Estimation validity was determined by comparing LP estimated values to NFL values, as well as in a small validation study. LP estimates appeared reasonable compared to NFL values for calories, carbohydrates and total sugars, and performed well in the validation test; however, further work is needed to obtain more definitive conclusions on the accuracy of added sugar estimates in CPGs. As nutrition labeling regulations evolve, this approach can be adapted to test for potential product-specific, category-level, and population-level implications.

Estimating added sugars in US consumer packaged goods: An application to beverages in 2007–08

PubMed Central

Ng, Shu Wen; Bricker, Gregory; Li, Kuo-ping; Yoon, Emily Ford; Kang, Jiyoung; Westrich, Brian

2015-01-01

This study developed a method to estimate added sugar content in consumer packaged goods (CPG) that can keep pace with the dynamic food system. A team including registered dietitians, a food scientist and programmers developed a batch-mode ingredient matching and linear programming (LP) approach to estimate the amount of each ingredient needed in a given product to produce a nutrient profile similar to that reported on its nutrition facts label (NFL). Added sugar content was estimated for 7021 products available in 2007–08 that contain sugar from ten beverage categories. Of these, flavored waters had the lowest added sugar amounts (4.3g/100g), while sweetened dairy and dairy alternative beverages had the smallest percentage of added sugars (65.6% of Total Sugars; 33.8% of Calories). Estimation validity was determined by comparing LP estimated values to NFL values, as well as in a small validation study. LP estimates appeared reasonable compared to NFL values for calories, carbohydrates and total sugars, and performed well in the validation test; however, further work is needed to obtain more definitive conclusions on the accuracy of added sugar estimates in CPGs. As nutrition labeling regulations evolve, this approach can be adapted to test for potential product-specific, category-level, and population-level implications. PMID:26273127

Effect of local diets with added sucrose on glycemic profiles of healthy and diabetic Brazilian subjects.

PubMed

Marchini, J S; Fáccio, J R; Rodrigues, M M; Unamuno, M R; Foss, M C; Dutra-de-Oliveira, J E

1994-12-01

We set out to determine the daily glycemic profile of healthy and non-insulin-dependent diabetes mellitus (NIDDM) persons and to test the hypothesis that small amounts of sucrose added to NIDDM meals would not change their responses. Thirteen NIDDM and six healthy volunteers participated in the study. They initially consumed a diet similar to their home diet and later a diabetic hospital dietary regimen, with and without 30 g/day sugar replacing equivalent food energy. The hospital diet included their usual foods: bread, milk, rice, beans, meat, vegetables and fruits at breakfast, lunch and dinner. To follow their glycemic profile we drew several blood samples during a 22-hour period. The day-long plasma glucose profile of the NIDDM and healthy subjects showed similar patterns, increasing after the meals and returning later to baseline levels. The extra amount of sucrose consumed did not change the daily glycemic profile or the calculated glycemic area under the 22-hour glycemic curves. These results call attention to the importance of the 22-hour glycemic profile compared to other shorter glycemic indexes. The 22-hour profile has obvious advantage for planning day-long diabetic diets, taking in consideration local daily foods and usual eating habits. Maintenance of a small and traditional amount of food, e.g., sucrose, without harmful effects to the subjects, is another advantage of this proposition. It improves patient compliance as well as social daily life.

Sinking and fit of abutment of locking taper implant system

PubMed Central

Moon, Seung-Jin; Kim, Hee-Jung; Son, Mee-Kyoung

2009-01-01

STATEMENT OF PROBLEM Unlike screw-retention type, fixture-abutment retention in Locking taper connection depends on frictional force so it has possibility of abutment to sink. PURPOSE In this study, Bicon® Implant System, one of the conical internal connection implant system, was used with applying loading force to the abutments connected to the fixture. Then the amount of sinking was measured. MATERIAL AND METHODS 10 Bicon® implant fixtures were used. First, the abutment was connected to the fixture with finger force. Then it was tapped with a mallet for 3 times and loads of 20 kg corresponding to masticatory force using loading application instrument were applied successively. The abutment state, slightly connected to the fixture without pressure was considered as a reference length, and every new abutment length was measured after each load's step was added. The amount of abutment sinking (mm) was gained by subtracting the length of abutment-fixture under each loading condition from reference length. RESULTS It was evident, that the amount of abutment sinking in Bicon® Implant System increased as loads were added. When loads of 20 kg were applied more than 5 - 7 times, sinking stopped at 0.45 ± 0.09 mm. CONCLUSION Even though locking taper connection type implant shows good adaption to occlusal force, it has potential for abutment sinking as loads are given. When locking taper connection type implant is used, satisfactory loads are recommended for precise abutment location. PMID:21165262

[Eppendorf Schizophrenia Inventory (ESI) vs. Frankfurt Complaint Questionnaire (FCQ). Direct comparison in a clinical trial].

PubMed

Mass, R

2005-09-01

This study is the first to directly compare two clinical questionnaires which are both aimed at self-experienced cognitive dysfunctions of schizophrenia: Eppendorf Schizophrenia Inventory (ESI) and Frankfurt Complaint Questionnaire (FCQ). Evaluated were (a) diagnostic validity, (b) psychometric properties, (c) scale intercorrelations, and (d) factor analytic stability. Ad (a): schizophrenic subjects (n=36) show highly significant increases in the ESI scales and sum score when compared to other clinical groups (patients with depression, alcohol dependence, or obsessive-compulsive disorder, n>30, respectively); on the other hand, the FCQ yields no systematic group differences. Ad (b): mean of reliability coefficients (Cronbach alpha) of the ESI scales is r(tt)=0.86, mean of reliability coefficients of the FCQ scales is significantly lower. Ad (c): the mean intercorrelation between ESI and FCQ scales amounts to r(xy)=0.56 (minimum 0.29, maximum 0.73), corresponding to an average shared variance of about 31%. Ad (d): factor analysis yielded an ESI factor and a FBF factor; one-way ANOVA with the factor scores confirms the diagnostic validity of the ESI. ESI and FCQ measure essentially different aspects of schizophrenic psychopathology. Regarding reliability and diagnostic validity, the ESI is superior to the FCQ.

Dissolving and melting phenomena of inorganic and organic crystals by addition of third or second components

NASA Astrophysics Data System (ADS)

Funakoshi, Kunio; Negishi, Rina; Nakagawa, Hiroshi; Kawasaki, Rentaro

2017-06-01

Dissolution of potassium sulphate (K2SO4) crystals was decelerated or stopped since the trivalent chrome ions (Cr(III)) or the iron ions were added into a K2SO4 aqueous solution, but inhibition mechanism of crystal dissolving by additives is not discussed well. Moreover, the melting inhibition of organic compound crystals by addition of the second components is not reported. In this study, inorganic or organic compound crystals are dissolved in a solution added the third component or were melted in a melt added the second one, and the dissolving and melting inhibition phenomena of the inorganic and organic crystals with additives are discussed. The dissolving rates of K2SO4 crystals decreased with the increasing of the amount of Cr(III) added into an K2SO4 unsaturated solution. The melting rates of m-chloronitrobenzene (CNB) crystals were also decreased by addition of p-CNB. The dissolving rates of a K2SO4 mother crystal and the melting rates of a m-CNB mother crystal were scattered during experiments and the dissolving and the melting phenomena would be caused by adsorption and detachments of additives on and from crystal surfaces.

Overexpression of SREBP1 (sterol regulatory element binding protein 1) promotes de novo fatty acid synthesis and triacylglycerol accumulation in goat mammary epithelial cells.

PubMed

Xu, H F; Luo, J; Zhao, W S; Yang, Y C; Tian, H B; Shi, H B; Bionaz, M

2016-01-01

Sterol regulatory element binding protein 1 (SREBP1; gene name SREBF1) is known to be the master regulator of lipid homeostasis in mammals, including milk fat synthesis. The major role of SREBP1 in controlling milk fat synthesis has been demonstrated in bovine mammary epithelial cells. Except for a demonstrated role in controlling the expression of FASN, a regulatory role of SREBP1 on milk fat synthesis is very likely, but has not yet been demonstrated in goat mammary epithelial cells (GMEC). To explore the regulatory function of SREBP1 on de novo fatty acids and triacylglycerol synthesis in GMEC, we overexpressed the mature form of SREBP1 (active NH2-terminal fragment) in GMEC using a recombinant adenovirus vector (Ad-nSREBP1), with Ad-GFP (recombinant adenovirus of green fluorescent protein) as control, and infected the GMEC for 48 h. In infected cells, we assessed the expression of 20 genes related to milk fat synthesis using real time-quantitative PCR, the protein abundance of SREBP1 and FASN by Western blot, the production of triacylglycerol, and the fatty acid profile. Expression of SREBF1 was modest in mammary compared with the other tissues in dairy goats but its expression increased approximately 30-fold from pregnancy to lactation. The overexpression of the mature form of SREBP1 was confirmed by >200-fold higher expression of SREBF1 in Ad-nSREBP1 compared with Ad-GFP. We observed no changes in amount of the precursor form of SREBP1 protein but a >10-fold increase of the mature form of SREBP1 protein with Ad-nSREBP1. Compared with Ad-GFP cells (control), Ad-nSREBP1 cells had a significant increase in expression of genes related to long-chain fatty acid activation (ACSL1), transport (FABP3), desaturation (SCD1), de novo synthesis of fatty acids (ACSS2, ACLY, IDH1, ACACA, FASN, and ELOVL6), and transcriptional factors (NR1H3 and PPARG). We observed a >10-fold increase in expression of INSIG1 but SCAP was downregulated by Ad-nSREBP1. Among genes related to milk fat synthesis and lipid droplet formation, only LPIN1 and DGAT1 were upregulated by Ad-nSREBP1. Compared with the Ad-GFP, the cellular triacylglycerol content was higher and the percentage of C16:0 and C18:1 increased, whereas that of C16:1, C18:0, and C18:2 decreased in Ad-nSREBP1 cells. Overall, the data provide strong support for a central role of SREBP1 in the regulation of milk fat synthesis in goat mammary cells. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Transformation of leaf litter by insect herbivory in the Subarctic: Consequences for soil biogeochemistry under global change

NASA Astrophysics Data System (ADS)

Kristensen, J. A.; Metcalfe, D. B.; Rousk, J.

2017-12-01

Climate warming may increase insect herbivore ranges and outbreak intensities in arctic ecosystems. Thorough understanding of the implications of these changes for ecosystem processes is essential to make accurate predictions of surface-atmosphere carbon (C) feedbacks. Yet, we lack a comprehensive understanding of the impacts of herbivore outbreaks on soil microbial underpinnings of C and nitrogen (N) fluxes. Here, we investigate the growth responses of heterotrophic soil decomposers and C and N mineralisation to simulated defoliator outbreaks in Subarctic birch forests. In microcosms, topsoil was incubated with leaf litter, insect frass, mineral N and combinations of the three; all was added in equal amounts of N. A higher fraction of added C and N was mineralised during outbreaks (frass addition) relative to non-outbreak years (litter addition). However, under high mineral N-availability in the soil of the kind likely under longer periods of enhanced insect herbivory (litter+mineral N), the mineralised fraction of added C decreased while the mineralised fraction of N increased substantially, which suggest a shift towards more N-mining of the organic substrates. This shift was accompanied by higher fungal dominance, and may facilitate soil C-accumulation assuming constant quality of C-inputs. Thus, long-term increases of insect herbivory, of the kind observed in some areas and projected by some models, may facilitate higher ecosystem C-sink capacity in this Subarctic ecosystem.

The Effects of Potato Puree and Bread Crumbs on Some Quality Characteristics of Low Fat Meatballs

PubMed Central

Ergezer, Haluk; Akcan, Tolga; Serdaroğlu, Meltem

2014-01-01

The purpose of this study was to determine the effects of using different amounts of potato puree (PP) (10 or 20%) and 10% bread crumbs (BC) as an extender and also control samples (C) with no added extender on chemical composition, energy values, cooking analyses, colour measurements, water holding capacity (WHC), penetration values, thiobarbituric acid value (TBA) and sensory analyses of meatballs. Meatball samples were cooked in a pre-heated 180℃ electric oven. Uncooked meatballs formulated with 20% PP had the highest moisture content. No significant differences were recorded for protein contents of uncooked samples. The highest cooking yield was found in samples extended with 10% BC. Increasing PP from 10% to 20% increased cooking yield of meatballs. 20% PP increased moisture and fat retention values and water holding capacity of meatballs. Meatballs with 10% BC had the lowest (the hardness in the texture) and meatballs with the 20% PP had the highest (the softness in the texture) penetration values. Formulating meatballs at a level of 20% resulted lower L* values. TBA values of control samples were higher than in PP added samples at the end of the storage period. Flavour scores for meatballs formulated with PP were higher than control and meatballs formulated with BC. Meatballs formulated with 10% PP had similar overall acceptability with meatballs added with 10% BC. PMID:26761488

The Effects of Potato Puree and Bread Crumbs on Some Quality Characteristics of Low Fat Meatballs.

PubMed

Ergezer, Haluk; Akcan, Tolga; Serdaroğlu, Meltem

2014-01-01

The purpose of this study was to determine the effects of using different amounts of potato puree (PP) (10 or 20%) and 10% bread crumbs (BC) as an extender and also control samples (C) with no added extender on chemical composition, energy values, cooking analyses, colour measurements, water holding capacity (WHC), penetration values, thiobarbituric acid value (TBA) and sensory analyses of meatballs. Meatball samples were cooked in a pre-heated 180℃ electric oven. Uncooked meatballs formulated with 20% PP had the highest moisture content. No significant differences were recorded for protein contents of uncooked samples. The highest cooking yield was found in samples extended with 10% BC. Increasing PP from 10% to 20% increased cooking yield of meatballs. 20% PP increased moisture and fat retention values and water holding capacity of meatballs. Meatballs with 10% BC had the lowest (the hardness in the texture) and meatballs with the 20% PP had the highest (the softness in the texture) penetration values. Formulating meatballs at a level of 20% resulted lower L* values. TBA values of control samples were higher than in PP added samples at the end of the storage period. Flavour scores for meatballs formulated with PP were higher than control and meatballs formulated with BC. Meatballs formulated with 10% PP had similar overall acceptability with meatballs added with 10% BC.

Effects of roughage source, amount, and particle size on behavior and gastrointestinal health of veal calves.

PubMed

Webb, L E; Bokkers, E A M; Heutinck, L F M; Engel, B; Buist, W G; Rodenburg, T B; Stockhofe-Zurwieden, N; van Reenen, C G

2013-01-01

The European Union 1997 Directive, stipulating that veal calves should be fed a minimum of 50 to 250 g of fibrous feed from 8 to 20 wk of age, is vague. A fibrous feed ration maximum of 250 g has been implicated in welfare issues, namely the occurrence of abnormal oral behaviors and poor gastrointestinal health. Past research suggests that this amount is insufficient to prevent the development of abnormal oral behaviors and enabling good rumen development. Different sources and particle sizes of roughage could lead to very different welfare outcomes. In a 3×2 × 2 factorial design, 240 group-housed calves (10±1 d; 46.1±0.1 kg) were fed different roughage sources (straw, maize silage, or maize cob silage; the latter 2 were dried and provided no extra moisture compared with straw) in 2 amounts (250 or 500 g of dry matter per day), and 2 particle sizes (chopped or ground). Roughage was supplemented to milk replacer (MR) from 2 wk after arrival. In addition, 60 calves were fed 1 of 3 additional control treatments: MR only (n=20), MR plus an iron supplement (n=20), or MR plus ad libitum hay (n=20). Oral behaviors were recorded using instantaneous scan sampling at 2-min intervals for 2 h in 3 periods per day, at 12 and 22 wk of age. Calves were slaughtered at 24 wk of age and rumen and abomasal health parameters were recorded. Limited provision of straw resulted in behavior comparable with that from unlimited provision of hay, with reduced tongue playing and oral manipulation of the environment, as well as increased chewing compared with diets with no roughage supplement. Straw prevented ruminal hairballs, but impaired rumen development and increased abomasal damage. A higher ration of roughage increased chewing (12 wk), decreased oral manipulation of the trough (12 and 22 wk) and the pen (22 wk), and increased rumen weight. However, more roughage led to increased abomasal damage for certain parameters. Longer feed particles had no obvious benefits for behavior, but decreased hairball prevalence. Overall, unlimited hay had the highest benefit for both behavior and gastrointestinal health. Adding iron to the MR did not alter behavior or gastrointestinal health compared with MR without iron supplement. This study demonstrated that different roughage sources, amounts, and particle sizes have different effects on veal calf behavior and gastrointestinal health, and hence on veal calf welfare. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

[Reproductive performance and milk production of Israeli-Holstein cows with different supplementation during the dry period].

PubMed

Francos, G; Distl, O; Ezra, E; Mayer, E

1999-06-01

In three field trials comprising 602 Israeli-Holstein dairy cows, the effect of the dry period ration on reproductive performance, culling rate and milk production was investigated. The cows were fed in groups. The basic dry period rations consisted for two herds of medium quality cereal hay and for one herd of corn straw, which were fed ad libitum. In each herd dry cows were assigned to an experimental and control group. Cows of the experimental group were supplemented with 1.5 to 3 kg of lactating cows mixed ration (LMR), whereas in the control group the amount of supplement was increased by the factor two or 3.3. In the experimental group the amount of the supplement was calculated to achieve levels of net energy and of crude protein close to NRC requirements; in the control group the level of net energy and protein was 12 to 18% higher as compared to the experimental group. The amount of LMR supplement in the experimental group of herds A, B, C were 1.5 kg, 1.9 kg, and 3 kg, respectively. In the control groups these amounts were 5 kg, 3.8 kg, and 6 kg, respectively. The groups fed moderate amounts of LMR supplement had a higher conception rate at first insemination, a higher percentage of cows conceiving and fewer cows culled in the consecutive lactation than cows fed increased amounts of LMR supplement. The lactational incidence of reproductive disorders and the milk production were not affected by the differences in feeding during the dry period. Reproductive performance and culling rate appeared to be more favorable for cows fed moderate amounts of supplement during the entire dry period or during the last 3 to 4 weeks of the dry period.

Far-red light is needed for efficient photochemistry and photosynthesis.

PubMed

Zhen, Shuyang; van Iersel, Marc W

2017-02-01

The efficiency of monochromatic light to drive photosynthesis drops rapidly at wavelengths longer than 685nm. The photosynthetic efficiency of these longer wavelengths can be improved by adding shorter wavelength light, a phenomenon known as the Emerson enhancement effect. The reverse effect, the enhancement of photosynthesis under shorter wavelength light by longer wavelengths, however, has not been well studied and is often thought to be insignificant. We quantified the effect of adding far-red light (peak at 735nm) to red/blue or warm-white light on the photosynthetic efficiency of lettuce (Lactuca sativa). Adding far-red light immediately increased quantum yield of photosystem II (Φ PSII ) of lettuce by an average of 6.5 and 3.6% under red/blue and warm-white light, respectively. Similar or greater increases in Φ PSII were observed after 20min of exposure to far-red light. This longer-term effect of far-red light on Φ PSII was accompanied by a reduction in non-photochemical quenching of fluorescence (NPQ), indicating that far-red light reduced the dissipation of absorbed light as heat. The increase in Φ PSII and complementary decrease in NPQ is presumably due to preferential excitation of photosystem I (PSI) by far-red light, which leads to faster re-oxidization of the plastoquinone pool. This facilitates reopening of PSII reaction centers, enabling them to use absorbed photons more efficiently. The increase in Φ PSII by far-red light was associated with an increase in net photosynthesis (P n ). The stimulatory effect of far-red light increased asymptotically with increasing amounts of far-red. Overall, our results show that far-red light can increase the photosynthetic efficiency of shorter wavelength light that over-excites PSII. Copyright © 2016 Elsevier GmbH. All rights reserved.

Dust Emissions from Undisturbed and Disturbed, Crusted Playa Surfaces: Cattle Trampling Effect

NASA Astrophysics Data System (ADS)

Zobeck, T. M.; Baddock, M. C.; van Pelt, R.; Fredrickson, E. L.

2009-12-01

Dry playa lake beds can be a significant source of fine dust emissions during high wind events in arid and semiarid landscapes. The physical and chemical properties of the playa surface control the amount and properties of the dust emitted. In this study, we use a field wind tunnel to quantify the dust emissions from a bare, fine-textured playa surface located in the Chihuahua Desert at the Jornada Experimental Range, near Las Cruces, New Mexico, USA. We tested natural, undisturbed crusted surfaces and surfaces that had been subjected to two levels of domestic animal disturbance. The animal disturbance was provided by trampling produced from one and ten passes along the length of the wind tunnel by a 630 kg Angus-Hereford cross cow. The trampling broke the durable crust and created loose erodible material. Each treatment (natural crust, one pass, and ten passes) was replicated three times. A push-type wind tunnel with a 6 m long, 0.5 m wide, and 1 m high test section was used to generate dust emissions under controlled conditions. Clean medium sand was dropped onto the playa surface to act as an abrader material. The tunnel wind speed was equivalent to 15 m/s at a height of 2 m over a smooth soil surface. The tunnel was initially run for ten minutes, with no abrader added. A second 30 minute run was subsequently sampled as abrader was added to the wind stream. Dust and saltating material were collected using an isokinetic slot sampler at the end of the tunnel. Total airborne dust was collected on two 25 cm x 20 cm glass fiber filters (GFF) and measured using a GRIMM particle monitor every 6 sec throughout each test run. Disturbance by trampling generated increased saltating material and airborne dust. The amount of saltating material measured during the initial (no abrader added) run was approximately 70% greater and 5.8 times the amount of saltating material measured on the one pass and ten pass plots, respectively, compared with that observed on the undisturbed plots. The total amount of dust measured during the initial (no abrader added) run on GFF for the one pass and ten pass plots was almost twice and three times, respectively, that observed on the undisturbed plots. The ten pass treatment generated about 75% more PM10 dust, as measured by the GRIMM particle monitor, than the undisturbed plots during the 30 minute abrader run.

Response Surface Methodology for Design of Porous Hollow Sphere Thermal Insulator

NASA Astrophysics Data System (ADS)

Shohani, Nazanin; Pourmahdian, Saeed; Shirkavand Hadavand, Behzad

2017-11-01

In this study, response surface method is used for synthesizing polystyrene (PS) as sacrificial templates and optimizing the particle size. Three factors of initiator, stabilizer concentration and also stirring rate were selected as variable factors. Then, three different concentration of tetraethyl orthosilicate (TEOS) added to reaction media and core-shell structure with PS core and silica shell was developed. Finally, core-shell structure was changed to hollow silica sphere for using as thermal insulator. We observed that increased initiator concentration caused to larger PS particles, increase the stirring rate caused the smaller PS and also with increased the stabilizer concentration obtained that particle size decrease then after 2.5% began to increase. Also the optimum amount of TEOS was found.

Synthesis and characterization of ZnS with controlled amount of S vacancies for photocatalytic H2 production under visible light

PubMed Central

Wang, Gang; Huang, Baibiao; Li, Zhujie; Lou, Zaizhu; Wang, Zeyan; Dai, Ying; Whangbo, Myung-Hwan

2015-01-01

Controlling amount of intrinsic S vacancies was achieved in ZnS spheres which were synthesized by a hydrothermal method using Zn and S powders in concentrated NaOH solution with NaBH4 added as reducing agent. These S vacancies efficiently extend absorption spectra of ZnS to visible region. Their photocatalytic activities for H2 production under visible light were evaluated by gas chromatograph, and the midgap states of ZnS introduced by S vacancies were examined by density functional calculations. Our study reveals that the concentration of S vacancies in the ZnS samples can be controlled by varying the amount of the reducing agent NaBH4 in the synthesis, and the prepared ZnS samples exhibit photocatalytic activity for H2 production under visible-light irradiation without loading noble metal. This photocatalytic activity of ZnS increases steadily with increasing the concentration of S vacancies until the latter reaches an optimum value. Our density functional calculations show that S vacancies generate midgap defect states in ZnS, which lead to visible-light absorption and responded. PMID:25712901

Co-combustion of E+E waste plastics in the TAMARA test plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vehlow, J.; Wanke, T.; Bergfeldt, B.

1997-12-01

The co-combustion of different amounts of various plastic fractions of electrical and electronic (E+E) waste together with municipal solid waste has been tested in the Karlsruhe test incinerator TAMARA. The tests revealed no negative influences upon the combustion process. In general the increased heating value of the fuel causes an improved burnout in all residue streams. The halogens Cl and Br added with the plastics are mainly transferred as HCl or HBr into the flue gas. An influence upon the formation of chlorinated dioxins and furans could not be observed. With increasing Br feed bromine containing homologues were detected inmore » the raw gas. The furans formed easier than the dioxins and those homologues carrying one Br atom were by far prevailing. Even at high Br input the total amount of mixed halogenated species was limited to approximately 30% of the total load of such compounds which did not leave the typical operation window for PCDD/PCDF in TAMARA. The co-combustion tests demonstrated that MSW combustion is an ecologically acceptable and economically sound disposal route for limited amounts of specific E+E waste.« less

Metasomatic oxidation of upper mantle periodotite

USGS Publications Warehouse

McGuire, A.V.; Dyar, M.D.; Nielson, J.E.

1991-01-01

Examination of Fe3+ in metasomatized spinel peridotite xenoliths reveals new information about metasomatic redox processes. Composite xenoliths from Dish Hill, California possess remnants of magmatic dikes which were the sources of the silicate fluids responsible for metasomatism of the peridotite part of the same xenoliths. Mo??ssbauer spectra of mineral separates taken at several distances from the dike remnants provide data on Fe3+ contents of minerals in the metasomatized peridotite. Clinopyroxenes contain 33% of total iron (FeT) as Fe3+ (Fe3+/FeT=0.33); orthopyroxenes contain 0.06-0.09 Fe3+/FeT; spinels contain 0.30-0.40 Fe3+/FeT; olivines contain 0.01-0.06 Fe3+/FeT; and metasomatic amphibole in the peridotite contains 0.85-0.90 Fe3+/FeT. In each mineral, Fe3+ and Fe2+ cations per formula unit (p.f.u.) decrease with distance from the dike, but the Fe3+/FeT ratios of each mineral do not vary. Clinopyroxene, spinel, and olivine Fe3+/FeT ratios are significantly higher than in unmetasomatized spinel peridotites. Metasomatic changes in Fe3+/FeT ratios in each mineral are controlled by the oxygen fugacity of the system, but the mechanism by which each phase accommodates this ratio is affected by crystal chemistry, kinetics, rock mode, fluid composition, fluid/rock ratio, and fluid-mineral partition coefficients. Ratio increases in pyroxene and spinel occur by exchange reactions involving diffusion of Fe3+ into existing mineral grains rather than by oxidation of existing Fe2+ in peridotite mineral grains. The very high Fe3+/FeT ratio in the metasomatic amphibole may be a function of the high Fe3+/FeT of the metasomatic fluid, crystal chemical limitations on the amount of Fe3+ that could be accommodated by the pyroxene, spinel, and olivine of the peridotite, and the ability of the amphibole structure to accommodate large amounts of 3 + valence cations. In the samples studied, metasomatic amphibole accounts for half of the bulk-rock Fe2O3. This suggests that patent metasomatism may produce a greater change in the redox state of mantle peridotite than cryptic metasomatism. Comparison of the metasomatized samples with unmetasomatized peridotites reveals that both Fe2+ and Fe3+ cations p.f.u. were increased during metasomatism and 50% or more of iron added was Fe3+. With increasing distance from the dike, the ratio of added Fe3+ to added Fe2+ increases. The high Fe3+/FeT of amphibole and phlogopite in the dikes and in the peridotite, and the high ratios of added Fe3+/added Fe2+ in pyroxenes and spinel suggest that the Fe3+/FeT ratio of the metasomatic silicate fluid was high. As the fluid perolated through and reacted with the peridotite, Fe3+ and C-O-H volatile species were concentrated in the fluid, increasing the fluid Fe3+/FeT. ?? 1991 Springer-Verlag.

Can the everyday technology use questionnaire predict overall functional level among older adults with mild cognitive impairment or mild-stage alzheimer's disease? - a pilot study.

PubMed

Ryd, Charlotta; Nygård, Louise; Malinowsky, Camilla; Öhman, Annika; Kottorp, Anders

2017-03-01

The number of older adults living with mild cognitive impairment (MCI) or mild-stage Alzheimer's disease (AD) is increasing and they are often expected to live in their own homes without support, despite limited ability to perform daily life activities. The Everyday Technology Use Questionnaire (ETUQ) has proven to be able to separate these groups and might also have potential to predict overall functional level (need of assistance in daily life activities) among them. To investigate whether the ETUQ can predict overall functional level among older adults with MCI or mild-stage AD. Participants were older adults with a mean age of 76 years with MCI (n = 28) or mild-stage AD (n = 39). A three-step scale indicating (i) independence, (ii) need for minimal assistance or (iii) need for moderate to maximal assistance in daily life was dichotomised in two ways and used as outcome variables in two logistic regression models. Predictors in both models were perceived ability to use everyday technology (ET) and amount of relevant everyday technologies measured by the ETUQ. Ethical approval was obtained from the regional Ethical Committee. Perceived ability to use ET discriminated individuals who were independent or in need of minimal support from those in need of moderate to maximal assistance (OR = 1.82, p < 0.01, confidence interval = 95%; 1.76-2.82). The amount of relevant everyday technologies discriminated individuals who were independent from those in need of assistance at any level (OR = 1.39; p < 0.01; confidence interval = 95%; 1.11-1.75). Both perceived ability to use ET and amount of relevant everyday technologies had potential to predict overall function but at different levels. The findings support the predictive validity of the ETUQ and suggest further research for the development of clinical cut-off criteria. © 2016 Nordic College of Caring Science.

40 CFR 63.1303 - Monitoring requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1303 Monitoring... HAP ABA and polyol added to the foam production line at the mixhead. (1) The owner or operator of each... shall continuously monitor the amount of polyol added at the mixhead when foam is being poured, in...

40 CFR 63.1303 - Monitoring requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) National Emission Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63...) Monitoring for HAP ABA and polyol added to the foam production line at the mixhead. (1) The owner or operator... slabstock affected sources shall continuously monitor the amount of polyol added at the mixhead when foam is...

40 CFR 63.1303 - Monitoring requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) National Emission Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63...) Monitoring for HAP ABA and polyol added to the foam production line at the mixhead. (1) The owner or operator... slabstock affected sources shall continuously monitor the amount of polyol added at the mixhead when foam is...

40 CFR 63.1303 - Monitoring requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1303 Monitoring... HAP ABA and polyol added to the foam production line at the mixhead. (1) The owner or operator of each... shall continuously monitor the amount of polyol added at the mixhead when foam is being poured, in...

40 CFR 63.1303 - Monitoring requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1303 Monitoring... HAP ABA and polyol added to the foam production line at the mixhead. (1) The owner or operator of each... shall continuously monitor the amount of polyol added at the mixhead when foam is being poured, in...

Roselle (Hibiscus sabdariffa L.) and soybean oil effects on quality characteristics of pork patties studied by response surface methodology.

PubMed

Jung, Eunkyung; Joo, Nami

2013-07-01

Response surface methodology was used to investigate the effect and interactions of processing variables such as roselle extract (0.1-1.3%), soybean oil (5-20%) on physicochemical, textural and sensory properties of cooked pork patties. It was found that reduction in thickness, pH, L* and b* values decreased; however, water-holding capacity, reduction in diameter and a* values increased, respectively, as the amount of roselle increased. Soybean oil addition increased water-holding capacity, reduction in thickness, b* values of the patties. The hardness depended on the roselle and soybean oil added, as its linear effect was negative at p<0.01. The preference of color, tenderness, juiciness, and overall quality depend on the addition of roselle and soybean oil. The maximum overall quality score (5.42) was observed when 12.5 g of soybean oil and 0.7 g of roselle extract was added. The results of this optimization study would be useful for meat industry that tends to increase the product yield for patties using the optimum levels of ingredients by RSM. Copyright © 2013 Elsevier Ltd. All rights reserved.

Characterization of Ni-P-SiO2 nano-composite coating on magnesium

NASA Astrophysics Data System (ADS)

Sadreddini, S.; Salehi, Z.; Rassaie, H.

2015-01-01

In this study, the effects of SiO2 nanoparticles added to the electroless Ni-P coating were studied. The surface morphology, corrosion behavior, hardness and porosity of Ni-P-SiO2composite were investigated. The related microstructure was investigated through field emission scanning electron microscopy (FESEM) and the amount of SiO2 was examined by Energy Dispersive Analysis of X-ray (EDX). The corrosion behavior was evaluated through electrochemical impedance spectroscopy (EIS) and polarization techniques. The results illustrated that with increasing the quantity of the SiO2 nanoparticles, the corrosion rate decreased and the hardness increased.

Deformation and Plateau Region of Functionally Graded Aluminum Foam by Amount Combinations of Added Blowing Agent

PubMed Central

Hangai, Yoshihiko; Utsunomiya, Takao; Kuwazuru, Osamu; Kitahara, Soichiro; Yoshikawa, Nobuhiro

2015-01-01

Recently, to further improve the performance of aluminum foam, functionally graded (FG) aluminum foams, whose pore structure varies with their position, have been developed. In this study, three types of FG aluminum foam of aluminum alloy die casting ADC12 with combinations of two different amounts of added blowing agent titanium(II) hydride (TiH2) powder were fabricated by a friction stir welding (FSW) route precursor foaming method. The combinations of 1.0–0 mass %, 0.4–0 mass %, and 0.2–0 mass % TiH2 were selected as the amounts of TiH2 relative to the mass of the volume stirred by FSW. The static compression tests of the fabricated FG aluminum foams were carried out. The deformation and fracture of FG aluminum foams fundamentally started in the high-porosity (with TiH2 addition) layer and shifted to the low-porosity (without TiH2 addition) layer. The first and second plateau regions in the relationship between compressive stress and strain independently appeared with the occurrence of deformations and fractures in the high- and low-porosity layers. It was shown that FG aluminum foams, whose plateau region varies in steps by the combination of amounts of added TiH2 (i.e., the combination of pore structures), can be fabricated. PMID:28793626

Excess lithium salt functions more than compensating for lithium loss when synthesizing Li6.5La3Ta0.5Zr1.5O12 in alumina crucible

NASA Astrophysics Data System (ADS)

Liu, Kai; Ma, Jiang-Tao; Wang, Chang-An

2014-08-01

Garnet type electrolyte "Li6.5La3Ta0.5Zr1.5O12" (LLZTO) was prepared by conventional solid-state reaction in alumina crucibles and excess lithium salt (from 0% to 50 mol%) was added into the starting materials to investigate the effects of excess lithium salt on the property of LLZTO. SEM, XRD and AC impedance were used to determine the microstructure, phase formation and Li-ion conductivity. Cubic garnet with a minor second phase LiAlO2 in the grain boundary was obtained for the pellets with excess lithium salt. As the amount of excess lithium salt increased, more Al element diffused from alumina crucibles to LLZTO pellets and reacted with excess lithium salt to form liquid Li2O-Al2O3 phase in the grain boundary, which accelerated the pellets' densification and reduced lithium loss at a high temperature. Ionic conductivity of LLZTO pellets increased with the amount of excess lithium salt added and leveled off at ∼4 × 10-4 S cm-1 when lithium salt exceeded 30 mol%. The performance of Li-air batteries with hybrid electrolytes, using homemade LLZTO thin pellets as solid electrolytes, was investigated. The LLZTO thin pellet with more excess lithium salt in starting material had a higher density and resulted in better cell performance.

Effect of addition of commercial grape seed tannins on phenolic composition, chromatic characteristics, and antioxidant activity of red wine.

PubMed

Neves, Ana C; Spranger, Maria I; Zhao, Yuqing; Leandro, Maria C; Sun, Baoshan

2010-11-24

The effect of addition of grape seed tannins on the phenolic composition, chromatic characteristics, and antioxidant activity of red wine was studied. Two highly pure commercial grape seed tannins (GSE100 and GSE300) were selected, and their phenolic compositions were determined. Two types of red wines were made with Castelão/Tinta Miúda (3/2, w/w) grapevine varieties by fermentation on skin using two different maceration times, which correspond to the wines rich and poor in polyphenols, respectively. Each of these wines was used for experimentation with the addition of GSE100 and GSE300 before and immediately after alcoholic fermentation. Phenolic composition, chromatic characteristics, and antioxidant activity of the finished red wines were analyzed by HPLC-DAD, CIElab 76 convention, and DPPH radical test, respectively. The results showed that the addition of grape seed tannins had obvious effects of increasing color intensity and antioxidant activity only in the wines poor in polyphenols. Although GSE300 contained much higher amounts of di- and trimer procyanidins and a lower amount of polymeric proanthocyanidins, it provided effects of increasing the color intensity and antioxidant activity of the wines poor in polyphenols similar to those of GSE100. Furthermore, GSE100 released more gallic acid to wines than GSE300, although no gallic acid was detected in GSE100. Tannins added after alcoholic fermentation had a better effect on phenolic composition of red wine than tannins added before alcoholic fermentation.

Enhanced Antioxidant Activity of Mugwort Herb and Vitamin C in Combination on Shelf-life of Chicken Nuggets

PubMed Central

Choi, Yun-Sang; Lee, Mi-Ai

2014-01-01

The effect of mugwort extract (ME) and vitamin C (VC), added individually or in combination, on color, lipid oxidation, and sensory characteristics of chicken nuggets stored for 12 d was investigated. Eight treatments of chicken nuggets contained the following: Control (no antioxidant added), VC (0.05% VC), ME 0.05 (0.05% ME), ME 0.1 (0.1% ME), ME 0.2 (0.2% ME), VC+ME 0.05 (0.05% VC + 0.05% ME) and VC+ME 0.1 (0.05% VC + 0.1% ME), VC+ME 0.2 (0.05% VC + 0.2% ME). Results showed that the mixture of 0.05% VC and 0.2% ME was most effective for delaying lipid oxidation (thiobarbituric acid reactive substances, conjugated dienies, and peroxide formation) when compared to the control or ME alone added. The color values of all treatments were significantly affected by adding ME. Additionally, the total color difference (ΔE), chroma (C*), and hue angle (H°) values of all treatments, except for VC, were lower than those of the control as the amount of ME increased. The sensory characteristics (flavor, odor, and overall acceptability) did not differ significantly in any of the chicken nugget samples, whereas storage time had a significant effect. The results suggest that the possibility of utilizing chicken nuggets with a mixture of mugwort extract and vitamin C for the increase of shelf-life and quality. PMID:26761491

Sagittal Plane Correction Using the Lateral Transpsoas Approach: A Biomechanical Study on the Effect of Cage Angle and Surgical Technique on Segmental Lordosis.

PubMed

Melikian, Rojeh; Yoon, Sangwook Tim; Kim, Jin Young; Park, Kun Young; Yoon, Caroline; Hutton, William

2016-09-01

Cadaveric biomechanical study. To determine the degree of segmental correction that can be achieved through lateral transpsoas approach by varying cage angle and adding anterior longitudinal ligament (ALL) release and posterior element resection. Lordotic cage insertion through the lateral transpsoas approach is being used increasingly for restoration of sagittal alignment. However, the degree of correction achieved by varying cage angle and ALL release and posterior element resection is not well defined. Thirteen lumbar motion segments between L1 and L5 were dissected into single motion segments. Segmental angles and disk heights were measured under both 50 N and 500 N compressive loads under the following conditions: intact specimen, discectomy (collapsed disk simulation), insertion of parallel cage, 10° cage, 30° cage with ALL release, 30° cage with ALL release and spinous process (SP) resection, 30° cage with ALL release, SP resection, facetectomy, and compression with pedicle screws. Segmental lordosis was not increased by either parallel or 10° cages as compared with intact disks, and contributed small amounts of lordosis when compared with the collapsed disk condition. Placement of 30° cages with ALL release increased segmental lordosis by 10.5°. Adding SP resection increased lordosis to 12.4°. Facetectomy and compression with pedicle screws further increased lordosis to approximately 26°. No interventions resulted in a decrease in either anterior or posterior disk height. Insertion of a parallel or 10° cage has little effect on lordosis. A 30° cage insertion with ALL release resulted in a modest increase in lordosis (10.5°). The addition of SP resection and facetectomy was needed to obtain a larger amount of correction (26°). None of the cages, including the 30° lordotic cage, caused a decrease in posterior disk height suggesting hyperlordotic cages do not cause foraminal stenosis. N/A.

Enhancement of vortex induced forces and motion through surface roughness control

DOEpatents

Bernitsas, Michael M [Saline, MI; Raghavan, Kamaldev [Houston, TX

2011-11-01

Roughness is added to the surface of a bluff body in a relative motion with respect to a fluid. The amount, size, and distribution of roughness on the body surface is controlled passively or actively to modify the flow around the body and subsequently the Vortex Induced Forces and Motion (VIFM). The added roughness, when designed and implemented appropriately, affects in a predetermined way the boundary layer, the separation of the boundary layer, the level of turbulence, the wake, the drag and lift forces, and consequently the Vortex Induced Motion (VIM), and the fluid-structure interaction. The goal of surface roughness control is to increase Vortex Induced Forces and Motion. Enhancement is needed in such applications as harnessing of clean and renewable energy from ocean/river currents using the ocean energy converter VIVACE (Vortex Induced Vibration for Aquatic Clean Energy).

Effects of calcium and magnesium ions on the interaction of corticosterone with rat brain cytosol receptor(s).

PubMed

Nakai, T; Ueda, M; Takeda, R

1978-01-01

The apparent maximum corticosterone binding (B max) with rat brain cytosol and the apparent dissociation constant of this steroid-receptor binding (Kd) estimated with a Scatchard plot was 2.9 X 10(-13) moles/mg cytosol protein and 4.0 X 10(-9) M, respectively. When increasing amounts of CaCl2 or MgCl2 up to 5.0 mM were added, a specific [3H] corticosterone binding increased 4-fold by CaCl2 at concentrations of 1.0-2.0 mM and 1.5-fold by MgCl2 at concentrations of 0.5-5.0 mM. The addition of MnCl2 and KCl did not affect this binding. Binding of corticosterone with rat brain cytosol receptor(s) were decreased by increasing amounts of EGTA and complete inhibition was observed at concentrations equal to and greater than 2.5 mM. Inhibition of this binding by EDTA was less than by EGTA. Either theophylline or dibutyryl cyclic AMP had no effect on this binding.

Effects of medium-chain triacylglycerols on Maillard reaction in bread baking.

PubMed

Toyosaki, Toshiyuki

2018-06-01

To investigate the relationship between the fatty acid composition of medium-chain triacylglycerols (MCTs) and the Maillard reaction induced during bread baking, a comparison with various fatty acids was conducted. Saturated fatty acids had a remarkable inhibitory effect on the amount of advanced glycation end products (AGEs) generated from the Maillard reaction in bread baking compared to unsaturated fatty acids. The amount of AGEs produced by each fatty acid (mg kg -1 ) was as follows: C18:0, 18.7; C12:0, 35.2; C16:0, 21.4; C18:0, 38.2; C18:1, 68.7; C18:2, 80.1; C20:4, 80.8; C22:4, 89.8. Saturated fatty acids were possibly involved in the Maillard reaction and, as a result, acted to inhibit it. In the case of unsaturated fatty acids, amounts of AGEs during the Maillard reaction in baking tended to increase as the degree of unsaturation increased. In other words, there was a positive correlation between the degree of unsaturation and the amount of AGEs. It was also confirmed that the air pore distribution in baked bread was closely related to AGEs. These results led us to conclude that the fatty acid composition of the added lipids also influences properties that determine the tastiness of bread. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Improvement of vegetables elemental quality by espresso coffee residues.

PubMed

Cruz, Rebeca; Morais, Simone; Mendes, Eulália; Pereira, José A; Baptista, Paula; Casal, Susana

2014-04-01

Spent coffee grounds (SCG) are usually disposed as common garbage, without specific reuse strategies implemented so far. Due to its recognised richness in bioactive compounds, the effect of SCG on lettuce's macro- and micro-elements was assessed to define its effectiveness for agro industrial reuse. A greenhouse pot experiment was conducted with different amounts of fresh and composted spent coffee, and potassium, magnesium, phosphorous, calcium, sodium, iron, manganese, zinc and copper were analysed. A progressive decrease on all lettuce mineral elements was verified with the increase of fresh spent coffee, except for potassium. In opposition, an increment of lettuce's essential macro-elements was verified when low amounts of composted spent coffee were applied (5%, v/v), increasing potassium content by 40%, manganese by 30%, magnesium by 20%, and sodium by 10%, of nutritional relevance This practical approach offers an alternative reuse for this by-product, extendable to other crops, providing value-added vegetable products. Copyright © 2013 Elsevier Ltd. All rights reserved.

Increased expression of aquaporin-1 on the pleura of rats with a tuberculous pleural effusion.

PubMed

Du, Hongchun; Xie, Canmao; He, Qiao; Deng, Xiaohua

2007-12-01

The purpose of this study was to investigate whether the expression of AQP-1 on the pleura is altered in a rat model with a tuberculous pleural effusion (TPE) and to study its function. A TPE model was established by intrapleural inoculation with 0.03 mg (2 ml) standard tuberculosis bacillus (H(37)Rv). The rats with TPE were sacrificed at different time points (day 1, 3, or 5) after inoculation. The control group received a 2-ml intrapleural injection of saline. The visceral and parietal pleural tissues were harvested and processed for real-time RT-PCR, Western blot, immunohistochemistry, and determination of tissue AQP-1 levels. Recombinant adenovirus Ad-rAQP-1 containing full-length cDNA of AQP-1 was constructed. Six groups of seven Wistar rats were assigned to receive the following treatments: group 1: intrapleural administration of normal saline; group 2: intrapleural administration of tuberculosis bacilli (TB); group 3: intrapleural inoculation with TB at day 7 following intrapleural administration of Ad-rAQP-1 vector; group 4: intrapleural inoculation with 0.03 mg TB at day 7 following intrapleural administration of control Ad-GFP vector; group 5: intrapleural administration of Ad-rAQP-1; group 6: intrapleural administration of control Ad-GFP vector. The expression of AQP-l on the pleural tissue was detected by immunohistochemistry and Western blot analysis. Histopathologic changes of the pleura and the volume of pleural fluid were examined on day 7 following gene intervention or on day 3 following TB inoculation. Bilateral pleural effusions appeared within 5 days in all rats who received an intrapleural inoculation with TB. The peak amount of pleural fluid occurred on day 3. The AQP-1 expression at protein and mRNA was increased in the early phase of TPE. The expression of AQP-1 was increased in the Ad-rAQP-1 gene transfer group, indicating successful adenovirus gene transfer. The volume of pleural fluid in group 3 (6.1 +/- 0.7 ml) was significantly increased compared with that in group 2 (3.8 +/- 1.0 ml) and group 4 (4.0 +/- 1.1 ml). These findings suggested that AQP-1 was increased in TPE and it may be involved in the formation of TPE.

[Sensitive determination of Bi3+ by spectrofluorimetry based on graphene oxide-methylene blue system].

PubMed

Zhai, Qiu-ge; Guo, Peng; Zhou, Lin; Liu, Yan-ming

2014-08-01

Graphene oxide was prepared by the modified Hummers method and characterized by field emission scanning electron microscopy. The interaction of graphene with methylene blue was studied by UV absorption, the intensity of two main absorption peaks of methylene blue decreased significantly after the fluorescence was quenched, and the energy transfer didn't occur because the overlap of the absorption spectrum of GO and the emission spectrum of MB is too small. Therefore, the fluorescence quenching of MB and GO was static. When adding a certain amount of Bi3+ in the graphene-methylene blue system, Bi3+ replaces the methylene blue from the graphene-methylene blue complexes because Bi3+ has the smaller volume and is more positively charged. The methylene blue therefore dissociates from the GO-MB complexes, resulting in the recovery of fluorescence of the system. Furthermore, the fluorescence of the system increases with the increase in the amount of Bi3+ due to the enhanced amount of MB in the system. A novel spectrofluorimetric method was therefore developed for the sensitive determination of Bi3+. Some parameters including the concentration of methylene blue, the amount of graphene oxide, the amount of nitric acid and the sequence of reagent adding were optimized to obtain higher sensitivity. The fluorescence of the system was detected at an emission wavelength of 667 nm with excitation at 690 nm. Under the optimized conditions, the concentration of Bi3+ showed good linear relationships with the fluorescence intensity in the range of 0.5-100 micromol x L(-1), with correlation coefficients of r = 0.9955. The limits of detection for Bi3+ was 1.0 x 10(-8) mol x L(-1) (S/N=3). The selectivity of the proposed method was evaluated and the results showed that 1000-fold K+, Ca+, Na+, Mg2+, Cu2+; 100-fold Fe3+, Be2+, SiO2- Al3+, Ni2+, Sb3+, NO3-, Cl-, F-, and 20-fold Pb2+, Hg2+, Cd2+ had negligible interference with the determination of Bi3+. The method has advantages of sensitivity, rapidness and low cost. It was used for the determination of Bi3+ in environmental water samples inclu- ding pond water, rain water and sewage water with recoveries of 93.4%-105.2%.

Preparation and evaluation of gelling granules to improve oral administration.

PubMed

Ito, Ikumi; Ito, Akihiko; Unezaki, Sakae

2015-06-01

We investigated the preparation of oral granules that are solid when stored and that will swell and gel via water absorption, to address problems experienced by patients when taking medication. Important physical properties of gelling granules include elasticity that is normally smooth, quick water absorption and swelling properties that allow easy swallowing. We selected gelatin (GEL), succinylated gelatin (SUC-GEL) and ι-carrageenan (CAR) as matrix polymers that can undergo gelation at room temperature or at cold temperatures. Saccharide and polyethylene glycol (PEG) were added to prepare the experimental granules. The best matrix gelling granule was SUC-GEL. When xylitol (XYL), sorbitol (SOR) and maltitol (MAL) were added, elasticity was improved, and PEG improved the granule's water absorption behavior, which is an important element involved in gelation. The best granules were prepared by selecting SUC-GEL as the matrix and adding a small amount of PEG and XYL in amounts equal to that of SUC-GEL.

The impact of semantic impairment on word stem completion in Alzheimer's disease.

PubMed

Beauregard, M; Chertkow, H; Gold, D; Bergman, S

2001-01-01

Both the extent of semantic memory impairment and the level of processing attained during encoding might constitute critical factors in determining the amount of word-stem completion (WSC) priming encountered in Alzheimer's disease (AD) subjects. We investigated the impact of varying encoding level in AD and elderly normal subjects, using a set of stimuli ranked as "intact" or "degraded" in terms of each subject's semantic knowledge on probe questions. For both shallow and deep encoding conditions, overall priming in the two subject groups was equivalent. However, for the deep encoding condition, consisting of a semantic judgment task performed on each target word, the priming effect noted in AD subjects was significantly smaller for semantically degraded items than for semantically intact items. Results indicate that the degree of semantic impairment represents one important variable affecting the amount of WSC priming which results when deep encoding procedures are used at study.

Higher Spin Fields in Three-Dimensional Gravity

NASA Astrophysics Data System (ADS)

Lepage-Jutier, Arnaud

In this thesis, we study the effects of massless higher spin fields in three-dimensional gravity with a negative cosmological constant. First, we introduce gravity in Anti-de Sitter (AdS) space without the higher spin gauge symmetry. We recapitulate the semi-classical analysis that outlines the duality between quantum gravity in three dimensions with a negative cosmological constant and a conformal field theory on the asymptotic boundary of AdS 3. We review the statistical interpretation of the black hole entropy via the AdS/CFT correspondence and the modular invariance of the partition function of a CFT on a torus. For the case of higher spin theories in AdS 3 we use those modular properties to bound the amount of gauge symmetry present. We then discuss briefly cases that can evade this bound.

13 CFR 120.882 - Eligible Project costs for 504 loans.

Code of Federal Regulations, 2012 CFR

2012-01-01

... expansion may be refinanced and added to the expansion cost if: (1) Substantially all (85% or more) of the...). Prepayment penalties, financing fees, and other financing costs must also be added to the amount being... current fair market value of the fixed assets serving as collateral for the Refinancing Project, including...

Mercury toxicity reduced by selenium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1973-01-01

A methylmercury compound added to a tuna-corn-soya ration fed to Japanese quail was less toxic than an equivalent amount of the compound added to the basal corn-soya ration. Selenium present in the tuna is apparently the factor that reduces mercury toxicity, since it was also reduced or prevented by addition of selenium to the diets.

77 FR 71483 - Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-03

... collected during cleaning exceeds 8 grams. This AD also includes an optional terminating action. This AD was... replacing the rear bearing if the amount of dust collected during cleaning exceeds 8 grams. That NPRM also... gas generator hollow shaft is more than 8 grams, replace the gas generator rear bearing before further...

26 CFR 601.104 - Collection functions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... amount of tax (or a minimum penalty) is, pursuant to statute, added to the tax unless the failure to file... to statute, added to the tax unless the failure to pay or deposit the tax due within the prescribed... methods—(1) Returns. Generally, an internal revenue tax assessment is based upon a return required by law...

26 CFR 601.104 - Collection functions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... amount of tax (or a minimum penalty) is, pursuant to statute, added to the tax unless the failure to file... to statute, added to the tax unless the failure to pay or deposit the tax due within the prescribed... methods—(1) Returns. Generally, an internal revenue tax assessment is based upon a return required by law...

26 CFR 601.104 - Collection functions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... amount of tax (or a minimum penalty) is, pursuant to statute, added to the tax unless the failure to file... to statute, added to the tax unless the failure to pay or deposit the tax due within the prescribed... methods—(1) Returns. Generally, an internal revenue tax assessment is based upon a return required by law...

26 CFR 601.104 - Collection functions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... amount of tax (or a minimum penalty) is, pursuant to statute, added to the tax unless the failure to file... to statute, added to the tax unless the failure to pay or deposit the tax due within the prescribed... methods—(1) Returns. Generally, an internal revenue tax assessment is based upon a return required by law...

26 CFR 601.104 - Collection functions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... amount of tax (or a minimum penalty) is, pursuant to statute, added to the tax unless the failure to file... to statute, added to the tax unless the failure to pay or deposit the tax due within the prescribed... methods—(1) Returns. Generally, an internal revenue tax assessment is based upon a return required by law...

Solute-Filled Syringe For Formulating Intravenous Solution

NASA Technical Reports Server (NTRS)

Owens, Jim; Bindokas, AL; Dudar, Tom; Finley, Mike; Scharf, Mike

1993-01-01

Prefilled syringe contains premeasured amount of solute in powder or concentrate form used to deliver solute to sterile interior of large-volume parenteral (LVP) bag. Predetermined amount of sterile water also added to LVP bag through sterilizing filter, and mixed with contents of syringe, yielding sterile intravenous solution of specified concentration.

Dietary Supplement Ingredient Database (DSID) release 4.0

USDA-ARS?s Scientific Manuscript database

Nearly half of U.S. adults report taking dietary supplements (DS). A single serving of a DS may contain amounts of nutrients or other bioactive compounds that exceed their concentration in foods. During the manufacturing of DS, ingredients may be added in amounts exceeding the label claims in orde...

78 FR 4057 - Inflation Adjustment of Civil Money Penalty Amounts

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

...] RIN 2501-AD59 Inflation Adjustment of Civil Money Penalty Amounts AGENCY: Office of the Secretary, HUD. ACTION: Final rule. SUMMARY: This final rule amends HUD's civil money penalty and civil penalty... outdated cross-reference in its civil money penalty regulations. DATES: Effective Date: February 19, 2013...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2010 CFR

2010-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2013 CFR

2013-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2012 CFR

2012-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2011 CFR

2011-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

7 CFR 3550.63 - Maximum loan amount.

Code of Federal Regulations, 2014 CFR

2014-01-01

... self-help housing will be calculated by adding the total of the market value of the lot (including... amount. Total secured indebtedness must not exceed the area loan limit or market value limitations... appraisal, tax monitoring fee, and the charge to establish an escrow account for taxes and insurance will...

46 CFR 381.8 - Subsidized vessel participation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... from MARAD an amount for the operating-differential subsidy (ODS) likely to be paid for the carriage of... subsidized bidders; (2) Deriving “augmented bids” for the subsidized operators by adding the ODS amount to... on MARAD's calculation of anticipated costs (less ODS in the case of a subsidized vessel) for the...

Elucidating Pathogenic Mechanisms of Early-onset Alzheimer's Disease in Down Syndrome Patients.

PubMed

Asai, Masashi; Kawakubo, Takashi; Mori, Ryotaro; Iwata, Nobuhisa

2017-01-01

Down syndrome (DS) patients demonstrate the neuropathology of Alzheimer's disease (AD) characterized by the formation of senile plaques and neurofibrillary tangles by age 40-50 years. It has been considered for a number of years that 1.5-fold expression of the gene for the amyloid precursor protein (APP) located on chromosome 21 leading to overproduction of amyloid-β peptide (Aβ) results in the early onset of AD in adults with DS. However, the mean age of onset of familial AD with the Swedish mutation on APP which has high affinity for β-secretase associated with a dramatic increase in Aβ production is about 55 years. This paradox indicates that there is a poor correlation between average ages of AD onset and the theoretical amount of Aβ production and that there are factors exacerbating AD on chromosome 21. We therefore focused on dual-specificity tyrosine phosphorylation-regulated kinase 1A (DYRK1A), since overexpressing transgenic mice show AD-like brain pathology. The overexpression of DYRK1A caused suppression of the activity of neprilysin (NEP), which is a major Aβ-degrading enzyme in the brain, and phosphorylation at the NEP cytoplasmic domain. NEP activity was markedly reduced in fibroblasts derived from DS patients compared with that in fibroblasts derived from healthy controls. This impaired activity of NEP was rescued by DYRK1A inhibition. These results show that DYRK1A overexpression causes suppression of NEP activity through its phosphorylation in DS patients. Our results suggest that DYRK1A inhibitors could be effective against AD not only in adults with DS but also in sporadic AD patients.

How much image noise can be added in cardiac x-ray imaging without loss in perceived image quality?

NASA Astrophysics Data System (ADS)

Gislason-Lee, Amber J.; Kumcu, Asli; Kengyelics, Stephen M.; Rhodes, Laura A.; Davies, Andrew G.

2015-03-01

Dynamic X-ray imaging systems are used for interventional cardiac procedures to treat coronary heart disease. X-ray settings are controlled automatically by specially-designed X-ray dose control mechanisms whose role is to ensure an adequate level of image quality is maintained with an acceptable radiation dose to the patient. Current commonplace dose control designs quantify image quality by performing a simple technical measurement directly from the image. However, the utility of cardiac X-ray images is in their interpretation by a cardiologist during an interventional procedure, rather than in a technical measurement. With the long term goal of devising a clinically-relevant image quality metric for an intelligent dose control system, we aim to investigate the relationship of image noise with clinical professionals' perception of dynamic image sequences. Computer-generated noise was added, in incremental amounts, to angiograms of five different patients selected to represent the range of adult cardiac patient sizes. A two alternative forced choice staircase experiment was used to determine the amount of noise which can be added to a patient image sequences without changing image quality as perceived by clinical professionals. Twenty-five viewing sessions (five for each patient) were completed by thirteen observers. Results demonstrated scope to increase the noise of cardiac X-ray images by up to 21% +/- 8% before it is noticeable by clinical professionals. This indicates a potential for 21% radiation dose reduction since X-ray image noise and radiation dose are directly related; this would be beneficial to both patients and personnel.

A Cost of Illness Study of Children with High-Functioning Autism Spectrum Disorders and Comorbid Anxiety Disorders as Compared to Clinically Anxious and Typically Developing Children

ERIC Educational Resources Information Center

Steensel, Francisca J.; Dirksen, Carmen D.; Bögels, Susan M.

2013-01-01

The study's aim was to estimate the societal costs of children with high-functioning ASD and comorbid anxiety disorder(s) (ASD + AD-group; n = 73), and to compare these costs to children with anxiety disorders (AD-group; n = 34), and typically developing children (controls; n = 87). Mean total costs for the ASD + AD-group amounted €17,380 per…

The Effect of Nucleotides and Inhibitors on Respiration in Isolated Wheat Mitochondria 1

PubMed Central

Pomeroy, M. Keith

1975-01-01

The effect of mono-, di-, and trinucleoside phosphates and respiratory inhibitors on respiration in winter wheat (Triticum aestivum L. cv. Rideau) mitochondria has been examined. When added during state 4 respiration, subsequent to addition of ADP, all of the dinucleotides stimulated oxidation and induced respiratory control with all substrates examined. Similar results were obtained with AMP, but other mononucleotides and all trinucleotides did not affect the rate of oxidation. Nucleoside diphosphates did not stimulate respiration when added prior to the addition of ADP, but subsequent addition of AMP, ADP, or ATP re-established coupled respiration in the presence of the dinucleotides. The duration of 2, 4-dinitrophenol stimulated respiration during oxidation of α-ketoglutarate was found to be dependent on the amount of AMP, ADP, or ATP added, either prior, or subsequent to, addition of the uncoupler. The addition of oligomycin during 2, 4-dinitrophenol stimulated respiration reestablished coupled respiration with low ADP/O ratios, when added after addition of ATP or conditions which allow formation of ATP from added ADP. The nucleoside diphosphates, other than ADP, did not stimulate oxidation of α-ketoglutarate in the presence of 2, 4-dinitrophenol until a small amount of adenine nucleotide was added to the system. The results suggest that dinucleotides other than ADP, are able to participate in the energy conversion processs of the mitochondria, probably via transphosphorylation reactions. Images PMID:16659027

Purification and fermentation characteristics of exopolysaccharide from Fomitopsis castaneus Imaz.

PubMed

Guo, Wenkui; Chi, Yujie

2017-12-01

Short-chain fatty acids (SCFAs), which are the end products of carbohydrate fermentation in the gut, mainly contribute to energy metabolism in mammals. The amount of SCFAs produced during fermentation is an important parameter that characterizes the fermentation capacity of a system. This paper reports on the fermentation characteristics of exopolysaccharides (EPS) isolated from Fomitopsis castaneus Imaz, a wood-rot fungal species. We isolated and purified the main EPS fraction by freeze drying and DEAE-Sepharose fast flow chromatography. We then analyzed the monosaccharide composition of EPS. The isolated EPS was mainly composed of glucose, galactose, rhamnose, mannose, and arabinose. The characteristic absorption peaks of sugar esters were also detected. Fresh fecal extracts from healthy adults and children were used as fermentation substrate to simulate the human intestinal environment (anaerobic conditions at 37°C) and study the fermentation characteristics of the purified EPS. Adding the isolated EPS to the fermentation system of the simulated intestinal environment increased the SCFAs content in the fecal extract of adults and children. However, the yield of SCFAs, particularly butyric acid, in the fermentation system of fecal extract in children was higher than that in adults. Furthermore, adding exogenous lactic acid bacteria, such as Enterococcus fecalis and Enterococcus fecium, to the fermentation system effectively increased the SCFAs concentration in the model intestinal system of the children. By contrast, adding E. fecalis, Lactobacillus rhamnosus, and E. fecium increased the content of the produced SCFAs in the system of adults. Those results indicate that EPS isolated from F. castaneus Imaz was effectively fermented in the simulated intestinal environments, and the fermentation capability was enhanced by adding microbial flora. Copyright © 2017 Elsevier B.V. All rights reserved.

Influence of humic substances and iron and aluminum ions on the sorption of acetamiprid to an arable soil.

PubMed

Murano, Hirotatsu; Suzuki, Katsuhiro; Kayada, Saori; Saito, Mitsuhiko; Yuge, Naoya; Arishiro, Takuji; Watanabe, Akira; Isoi, Toshiyuki

2018-02-15

Humic substances (HS) in soil and sediments, and surface water influence the behavior of organic xenobiotics in the environment. However, our knowledge of the effects of specific HS fractions, i.e., humic acids (HAs), fulvic acids (FAs), and humin (HM), on the sorption of organic xenobiotics is limited. The neonicotinoid insecticide acetamiprid is thought to contribute to the collapse of honeybee colonies. To understand the role that soil organic matter plays in the fate of acetamiprid, interactions between acetamiprid and the above HS fractions were examined. Batch experiments were conducted using various combinations of a field soil sample and the above 3 HS fractions prepared from the same soil, and differences in isotherm values for acetamiprid sorption were investigated based on the structural differences among the HS fractions. The sorption of acetamiprid to soil minerals associated with HM (MHM) (Freundlich isotherm constant, K f : 6.100) was reduced when HAs or FAs were added (K f : 4.179 and 4.756, respectively). This can be attributed to hydrophobic interactions between HM and HAs or FAs in which their dissociated carboxyl and phenolic groups become oriented to face the soil solution. The amount of acetamiprid that was adsorbed to (MHM+HA) or (MHM+FA) increased when aluminum ions were added (K f : 6.933 and 10.48, respectively), or iron ions were added (K f : 7.303 and 11.29, respectively). Since acetamiprid has no affinity for inorganic components in soil, the formation of HS-metal complexes by cation bridging may have oriented the hydrophobic moieties in the HAs or FAs to face the soil solution and may also have resulted in the formation of dense structures, resulting in an increase in the amount of acetamiprid that becomes adsorbed to these structures. These results highlight the importance of interactions among soil components in the pedospheric diffusion of acetamiprid. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of Feeding Milk Replacer Ad Libitum or in Restricted Amounts for the First Five Weeks of Life on the Growth, Metabolic Adaptation, and Immune Status of Newborn Calves

PubMed Central

Schäff, Christine T.; Gruse, Jeannine; Maciej, Josefine; Mielenz, Manfred; Wirthgen, Elisa; Hoeflich, Andreas; Schmicke, Marion; Pfuhl, Ralf; Jawor, Paulina; Stefaniak, Tadeusz

2016-01-01

The pre-weaning period is critical for calf health and growth, and intensive milk feeding programs may assist postnatal development by improving body growth and organ maturation. The aim of the present work was to study the effects of ad libitum milk replacer (MR) feeding on the growth, metabolic adaptation, health, and immune status of newborn calves. Twenty-eight newborn Holstein and Holstein x Charolais crossbred calves were fed ad libitum (ADLIB) or in restricted amounts (6 liters per day; RES) during the first five weeks of life. The MR intake in the ADLIB treatment was gradually reduced at weeks 6 and 7, and all calves then received 6 liters of MR per day until day 60. Blood samples were collected to measure the plasma concentrations of metabolites, insulin, insulin-like growth factor (IGF)-I and IGF binding proteins (IGFBP), immunoglobulins, and acute phase proteins. The expression of mRNA associated with both the somatotropic axis and gluconeogenic enzymes was measured in the liver on day 60. Intensive feeding improved MR intake and growth in ADLIB without influencing concentrate intake. Carcass weight, perirenal fat, and muscle mass were greater in ADLIB. Plasma concentrations of glucose, triglycerides, insulin, and IGF-I were greater, whereas plasma concentrations of β-hydroxybutyrate, total protein, albumin, urea, IGFBP-2 and -4, and fibrinogen were lower at distinct time points in ADLIB. The hepatic mRNA expression of cytosolic phosphoenolpyruvate carboxykinase was greater in ADLIB. Most metabolic and endocrine differences occurred during the MR feeding period, but a slightly greater concentrate intake was associated with increased plasma IGF-I and insulin at the end of the study. The immune and health status of the calves were not affected by MR feeding. However, increased plasma fibrinogen in the RES group suggested differences in the acute phase response. PMID:28036351

Effects of Feeding Milk Replacer Ad Libitum or in Restricted Amounts for the First Five Weeks of Life on the Growth, Metabolic Adaptation, and Immune Status of Newborn Calves.

PubMed

Schäff, Christine T; Gruse, Jeannine; Maciej, Josefine; Mielenz, Manfred; Wirthgen, Elisa; Hoeflich, Andreas; Schmicke, Marion; Pfuhl, Ralf; Jawor, Paulina; Stefaniak, Tadeusz; Hammon, Harald M

2016-01-01

The pre-weaning period is critical for calf health and growth, and intensive milk feeding programs may assist postnatal development by improving body growth and organ maturation. The aim of the present work was to study the effects of ad libitum milk replacer (MR) feeding on the growth, metabolic adaptation, health, and immune status of newborn calves. Twenty-eight newborn Holstein and Holstein x Charolais crossbred calves were fed ad libitum (ADLIB) or in restricted amounts (6 liters per day; RES) during the first five weeks of life. The MR intake in the ADLIB treatment was gradually reduced at weeks 6 and 7, and all calves then received 6 liters of MR per day until day 60. Blood samples were collected to measure the plasma concentrations of metabolites, insulin, insulin-like growth factor (IGF)-I and IGF binding proteins (IGFBP), immunoglobulins, and acute phase proteins. The expression of mRNA associated with both the somatotropic axis and gluconeogenic enzymes was measured in the liver on day 60. Intensive feeding improved MR intake and growth in ADLIB without influencing concentrate intake. Carcass weight, perirenal fat, and muscle mass were greater in ADLIB. Plasma concentrations of glucose, triglycerides, insulin, and IGF-I were greater, whereas plasma concentrations of β-hydroxybutyrate, total protein, albumin, urea, IGFBP-2 and -4, and fibrinogen were lower at distinct time points in ADLIB. The hepatic mRNA expression of cytosolic phosphoenolpyruvate carboxykinase was greater in ADLIB. Most metabolic and endocrine differences occurred during the MR feeding period, but a slightly greater concentrate intake was associated with increased plasma IGF-I and insulin at the end of the study. The immune and health status of the calves were not affected by MR feeding. However, increased plasma fibrinogen in the RES group suggested differences in the acute phase response.

Effect of cassava peel and cassava bagasse natural fillers on mechanical properties of thermoplastic cassava starch: Comparative study

NASA Astrophysics Data System (ADS)

Edhirej, Ahmed; Sapuan, S. M.; Jawaid, Mohammad; Zahari, Nur Ismarrubie; Sanyang, M. L.

2017-12-01

Increased awareness of environmental and sustainability issues has generated increased interest in the use of natural fiber reinforced composites. This work focused on the use of cassava roots peel and bagasse as natural fillers of thermoplastic cassava starch (TPS) materials based on cassava starch. The effect of cassava bagasse (CB) and cassava peel (CP) content on the tensile properties of cassava starch (CS) biocomposites films was studied. The biocomposites films were prepared by casting technique using cassava starch (CS) as matrix and fructose as plasticizer. The CB and CP were added to improve the properties of the films. The addition of both fibers increased the tensile strength and modulus while decreased the elongation at break of the biocomposites films. Films containing CB showed higher tensile strength and modulus as compared to the films containing the same amount of CP. The addition of 6 % bagasse increased the modulus and maximum tensile stress to 581.68 and 10.78 MPa, respectively. Thus, CB is considered to be the most efficient reinforcing agent due to its high compatibility with the cassava starch. The use of CB and CP as reinforcement agents for CS thermoplastic cassava added value to these waste by-products and increase the suitability of CS composite films as environmentally friendly food packaging material.

Influence of mare uterine tubal fluids on the metabolism of stallion sperm.

PubMed

Engle, C E; Foley, C W; Witherspoon, D M; Scarth, R D; Goetsch, D D

1975-08-01

Three experiments were conducted on the metabolism of stallion sperm. In experiment 1, whole and washed sperm were incubated under aerobic and anaerobic enviroments and analyzed before and after controlled incubation for motility, pH, lactic acid, glucose, fructose, and O2 comsumption. In experiment 2, whole and washed sperm were incubated aerobically and anaerobically with and without uterine tubal fluids. Experiment 3 was the same as experiment 2, except added substrates of glucose and lactic acid were studied. The same examinations were made in experiments 2 and 3 as for experiment 1. Motility decreased significantly during incubation for all treatments, with the greatest decrease occurring for whole semen where only trace amounts of substrate (fructose) were present. Exogenous glucose plus uterine tubal fluid maintained sperm motility better than did added lactate. However, sperm respiration rates were highest when exogenous lactate was the only substrate in the incubation medium. The mean pH values for gel-free stallion semen at the start of controlled aerobic and anaerobic incubation were 7.08 and 7.34. Lactic acid accummulation for 1 hour increased from 0.05 mg to 0.09 mg/10(9) sperm when uterine tubal fluid was added to the incubation medium. Washed spermatozoa incubated in 0.03 M glucose plus uterine tubal fluid utilized less glucose than did sperm incubated in the glucose medium. These results, along with the increased oxygen utilization (ZO2) values produced by adding uterine tubal fluid to the incubation mediums, might indicate utilization of a uterine tubal substrate. Added uterine tubal fluid resulted in increased ZO2 values (expressed in mul of O2 utilized by 10(8) sperm in 1 hour at 37 C) for whole semen from 10.45 to 12.63. Washed spermatozoa also respired at a significantly greater rate than whole sperm. Respiration rates were greater for sperm incubated with 0.01 M lactic acid than for any other substrate or experiment.

Chemical Speciation of Water Soluble Ions and Metals of Cloud and Rain Water During the Puerto Rico African Dust and Clouds Study (PRADACS) Campaigns

NASA Astrophysics Data System (ADS)

Torres, E.; Valle Diaz, C. J.; Lee, T.; Collett, J. L.; Fitzgerald, E.; Cuadra-Rodriguez, L. A.; Prather, K. A.; Sánchez, M.; McDowell, W. H.; Mayol-Bracero, O. L.

2013-05-01

The underlying physico-chemical processes of dust particles interactions are poorly understood; even less understood is how aging impacts cloud properties and climate as the particles travel from Africa to the Caribbean region. Caribbean landmasses have tropical montane cloud forests (TMCFs) that are tightly coupled to the atmospheric hydrologic cycle. TMCFs are ecosystems to study the effects African Dust (AD) on cloud formation and precipitation as these are very sensitive ecosystems that respond to small changes in climate. As part of the Puerto Rico African Dust and Clouds Study (PRADACS), chemical analyses were performed on cloud and rain water samples collected at Pico del Este (PE) station in Luquillo, PR (1051 masl) during campaigns held from 2010 to 2012. At PE, two cloud collectors (i.e., single stage (Aluminum version), a 2-stage (Teflon version) Caltech Active Strand Cloudwater Collector (CASCC)), a rainwater collector, and anAerosol Time-Of-Flight Mass Spectrometer (ATOFMS) were operated. Chemical analyses performed on collected samples include pH, conductivity, ion chromatography (IC), and inductive coupled plasma (ICP). Results from these campaigns showed that on days that had air masses with the influence of AD, cloud water samples had higher conductivity and pH values on average (up to 5.7 and 180μS/cm, respectively) than those with air masses without AD influence. An increase in the concentrations of water-soluble ions like non-sea salt calcium and magnesium, and metals like magnesium, calcium and aluminum was observed and the appearance of iron was seen on ICP analyses. The ATOFMS, showed an increase on the amount of particles during AD influence with composition of aluminum, silicates, potassium, iron and titanium aerosols. The increase on the aforementioned species was constant in the three years of sampling, which give us confidence in the identification of the chemical species that are present during the influence of AD.

Smoking and Cerebral Oxidative Stress and Air Pollution: A Dreadful Equation with Particulate Matter Involved and One More Powerful Reason Not to Smoke Anything!

PubMed

Calderón-Garcidueñas, Lilian

2016-07-22

Smoking has serious health effects. Cigarettes, including tobacco, marijuana, and electronic nicotine delivery systems are very effective ways to inhale harmful amounts of fine and ultrafine particulate matter. Does size matter? Yes, indeed! The smaller the particle you inhale, the higher the ability to produce reactive oxygen species and to readily access the brain. In this issue of the Journal of Alzheimer's Disease, Durazzo provides evidence of an association between active cigarette tobacco smoking in cognitively-normal elders and increased cerebral oxidative stress, while in actively smoking Alzheimer's disease (AD) patients, the association was also seen with smaller left and total hippocampal volumes. This paper has highly relevant results of interest across the US and the world because millions of people are active smokers and they have other genetic and environmental risk factors that could play a key role in the development/worsening of brain oxidative stress and neurodegeneration. Smoking basically anything producing aerosols with particulate matter in the fine and ultrafine size range is detrimental to your brain. Marijuana and e-cigarette use has grown steadily among adolescents and young adults. Smoking-related cerebral oxidative stress is a potential mechanism promoting AD pathology and increased risk for AD. Current knowledge also relates fine and ultrafine particles exposures influencing neurodevelopmental processes in utero. The results from Durazzo et al. should be put in a broader context, a context that includes evaluating the oxidative stress of nano-aerosols associated with cigarette emissions and their synergistic effects with air pollution exposures. AD is expected to increase in the US threefold by the year 2050, and some of these future AD patients are smoking and vaping right now. Understanding the impact of everyday exposures to long-term harmful consequences for brain health is imperative.

Ad hoc instrumentation methods in ecological studies produce highly biased temperature measurements

USGS Publications Warehouse

Terando, Adam J.; Youngsteadt, Elsa; Meineke, Emily K.; Prado, Sara G.

2017-01-01

In light of global climate change, ecological studies increasingly address effects of temperature on organisms and ecosystems. To measure air temperature at biologically relevant scales in the field, ecologists often use small, portable temperature sensors. Sensors must be shielded from solar radiation to provide accurate temperature measurements, but our review of 18 years of ecological literature indicates that shielding practices vary across studies (when reported at all), and that ecologists often invent and construct ad hoc radiation shields without testing their efficacy. We performed two field experiments to examine the accuracy of temperature observations from three commonly used portable data loggers (HOBO Pro, HOBO Pendant, and iButton hygrochron) housed in manufactured Gill shields or ad hoc, custom‐fabricated shields constructed from everyday materials such as plastic cups. We installed this sensor array (five replicates of 11 sensor‐shield combinations) at weather stations located in open and forested sites. HOBO Pro sensors with Gill shields were the most accurate devices, with a mean absolute error of 0.2°C relative to weather stations at each site. Error in ad hoc shield treatments ranged from 0.8 to 3.0°C, with the largest errors at the open site. We then deployed one replicate of each sensor‐shield combination at five sites that varied in the amount of urban impervious surface cover, which presents a further shielding challenge. Bias in sensors paired with ad hoc shields increased by up to 0.7°C for every 10% increase in impervious surface. Our results indicate that, due to variable shielding practices, the ecological literature likely includes highly biased temperature data that cannot be compared directly across studies. If left unaddressed, these errors will hinder efforts to predict biological responses to climate change. We call for greater standardization in how temperature data are recorded in the field, handled in analyses, and reported in publications.

Interaction of phloretin and 6-ketocholestanol with DPPC-liposomes as phospholipid model membranes.

PubMed

Auner, Barbara G; O'Neill, Michael A A; Valenta, Claudia; Hadgraft, Jonathan

2005-04-27

Phloretin and 6-ketocholestanol are penetration enhancers for percutaneous delivery of certain topically applied drugs. In the present study some physicochemical experiments have been performed to elucidate the mechanism of action of phloretin and 6-ketocholestanol. The penetration enhancing effect of phloretin and 6-ketocholestanol is believed to be due to their increase of the fluidity of the intercellular lipid bilayers of the stratum corneum. Phospholipid vesicles were chosen as a simple model to represent these bilayers. The effect of phloretin and 6-ketocholestanol on phase transition temperature and enthalpy was studied using differential scanning calorimetry. Beside of that the size of liposomes was monitored when the amount of penetration enhancer in the liposome preparation was changed. Addition of increasing amounts of phloretin and 6-ketocholestanol to the bilayer resulted in lowering of phase transition temperatures and increasing the enthalpy. Additionally the size of the liposomes was increased when penetration enhancer was added. The results suggest that phloretin as well as 6-ketocholestanol would interact with stratum corneum lipids in a similar manner, both reduce the diffusional resistance of the stratum corneum to drugs with balanced hydrophilic-lipophilic characteristics.

The effectiveness of the stabilization/solidification process on the leachability and toxicity of the tannery sludge chromium.

PubMed

Montañés, M T; Sánchez-Tovar, R; Roux, M S

2014-10-01

A stabilization/solidification (S/S) process by using cement was applied to tannery sludge in order to find a safer way of landfilling this waste. The effects of three parameters on the process effectiveness were analysed in terms of leachate toxicity and chromium retention (%). The parameters studied were the relative amount of added water (30-50 wt.%), cement (10-60 wt.% in the solid components), and the use of three different types of cement (clinker with additions of limestone, with additions of limestone and fly ashes, and with additions of pozzolans). Statistical analysis performed by variance analysis and categorical multifactorial tests reveals that all the studied parameters significantly influence the effectiveness of the process. Results showed that chromium retention decreases as the relative amount of cement and water increases, probably due to additional chromium provided by cement and increased in the porosity of the mixtures. Leachate toxicity showed the same minimum value for mixtures with 30% or 40% cement, depending on the type of cement, showing that clinker is the main material responsible for the process effectiveness, and additives (pozzolans or fly ashes) do not improve it. The volume increase is lower as less sludge is replaced by cement and the relative amount of water decreases, and for the cement without additions of fly ashes or pozzolans. Therefore, the latter seems to be the most appropriate cement in spite of being more expensive. This is due to the fact that the minimum toxicity value is achieved with a lower amount of cement; and moreover, the volume increase in the mixtures is lower, minimizing the disposal cost to a landfill. Copyright © 2014 Elsevier Ltd. All rights reserved.

Application of carbon and hydrogen stable isotope analyses to detect exogenous citric acid in Japanese apricot liqueur.

PubMed

Akamatsu, Fumikazu; Oe, Takaaki; Hashiguchi, Tomokazu; Hisatsune, Yuri; Kawao, Takafumi; Fujii, Tsutomu

2017-08-01

Japanese apricot liqueur manufacturers are required to control the quality and authenticity of their liqueur products. Citric acid made from corn is the main acidulant used in commercial liqueurs. In this study, we conducted spiking experiments and carbon and hydrogen stable isotope analyses to detect exogenous citric acid used as an acidulant in Japanese apricot liqueurs. Our results showed that the δ 13 C values detected exogenous citric acid originating from C 4 plants but not from C 3 plants. The δ 2 H values of citric acid decreased as the amount of citric acid added increased, whether the citric acid originated from C 3 or C 4 plants. Commercial liqueurs with declared added acidulant provided higher δ 13 C values and lower δ 2 H values than did authentic liqueurs and commercial liqueurs with no declared added acidulant. Carbon and hydrogen stable isotope analyses are suitable as routine methods for detecting exogenous citric acid in Japanese apricot liqueur. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of sulphate addition and sulphide inhibition on microbial fuel cells.

PubMed

Ieropoulos, I; Gálvez, A; Greenman, J

2013-01-10

The effects of adding sulphate in: (i) standard activated sludge microbial fuel cells (MFCs) and (ii) larger-scale leachate-treating columns - both as individual units and as a system connected in cascade - are reported. S-replete power output was ∼2-fold higher than that of the S-deplete MFC. Furthermore, the effects of evolved sulphide (S(2-)) inhibition were investigated. The overall decrease in power output from the sulphide inhibitor (Na(2)MoO(4)) additions was 83% for the S-replete and 90% for the S-deplete. The second phase with the leachate treating units shows an improvement of 32-86% (depended on leachate strength) in current output as a result of adding sulphate. When leachate column MFCs were connected fluidically in series, the amount of Na(2)SO(4) made available downstream was decreasing (increase in power was 99%, 40% and 12% for columns in cascade). Results demonstrated the beneficial effects of added sulphur sources to both activated sludge and leachate-treating MFCs. Copyright © 2012 Elsevier Inc. All rights reserved.

Adsorption-desorption reactions of selenium (VI) in tropical cultivated and uncultivated soils under Cerrado biome.

PubMed

Lessa, J H L; Araujo, A M; Silva, G N T; Guilherme, L R G; Lopes, G

2016-12-01

Soil management may affect selenium (Se) adsorption capacity. This study investigated adsorption and desorption of Se (VI) in selected Brazilian soils from the Cerrado biome, an area of ever increasing importance for agriculture expansion in Brazil. Soil samples were collected from cultivated and uncultivated soils, comprising clayed and sandy soils. Following chemical and mineralogical characterization, soil samples were subjected to Se adsorption and desorption tests. Adsorption was evaluated after a 72-h reaction with increasing concentrations of Se (0-2000 μg L -1 ) added as Na 2 SeO 4 in a NaCl electrolyte solution (pH 5.5; ionic strength 15 mmol L -1 ). Desorption, as well as distribution coefficients (K d ) for selenate were also assessed. Soil management affected Se adsorption capacity, i.e., Se adsorbed amounts were higher for uncultivated soils, when compared to cultivated ones. Such results were also supported by data of K d and maximum adsorption capacity of Se. This fact was attributed mainly to the presence of greater amounts of competing anions, especially phosphate, in cultivated soils, due to fertilizer application. Phosphate may compete with selenate for adsorption sites, decreasing Se retention. For the same group of soils (cultivated and uncultivated), Se adsorption was greater in the clayed soils compared to sandy ones. Our results support the idea that adding Se (VI) to the soil is a good strategy to increase Se levels in food crops (agronomic biofortification), especially when crops are grown in soils that have been cultivated over the time due to their low Se adsorption capacity (high Se availability). Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact of performance-based financing on primary health care services in Haiti.

PubMed

Zeng, Wu; Cros, Marion; Wright, Katherine D; Shepard, Donald S

2013-09-01

To strengthen Haiti's primary health care (PHC) system, the country first piloted performance-based financing (PBF) in 1999 and subsequently expanded the approach to most internationally funded non-government organizations. PBF complements support (training and technical assistance). This study evaluates (a) the separate impact of PBF and international support on PHC's service delivery; (b) the combined impact of PBF and technical assistance on PHC's service delivery; and (c) the costs of PBF implementation in Haiti. To minimize the risk of facilities neglecting potential non-incentivized services, the incentivized indicators were randomly chosen at the end of each year. We obtained quantities of key services from four departments for 217 health centres (15 with PBF and 202 without) from 2008 through 2010, computed quarterly growth rates and analysed the results using a difference-in-differences approach by comparing the growth of incentivized and non-incentivized services between PBF and non-PBF facilities. To interpret the statistical analyses, we also interviewed staff in four facilities. Whereas international support added 39% to base costs of PHC, incentive payments added only 6%. Support alone increased the quantities of PHC services over 3 years by 35% (2.7%/quarter). However, support plus incentives increased these amounts by 87% over 3 years (5.7%/quarter) compared with facilities with neither input. Incentives alone was associated with a net 39% increase over this period, and more than doubled the growth of services (P < 0.05). Interview findings found no adverse impacts and, in fact, indicated beneficial impacts on quality. Incentives proved to be a relatively inexpensive, well accepted and very effective complement to support, suggesting that a small amount of money, strategically used, can substantially improve PHC. Haiti's experience, after more than a decade of use, indicates that incentives are an effective tool to strengthen PHC.

Structural and electrical properties of 1 − x(Na{sub 0.5}K{sub 0.5})NbO{sub 3}–x(Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} ceramics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Tae-Ho; Lee, Sung-Gap, E-mail: lsgap@gnu.ac.kr; Yeo, Jin-Ho

2014-10-15

Highlights: • We fabricated lead-free (Na{sub 0.5}K{sub 0.5})NbO{sub 3} ceramics. • We studied the structural and electrical properties of 1 − x(Na{sub 0.5}K{sub 0.5})NbO{sub 3}–x(Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} ceramics. • The structural and electrical properties improved with increasing amount of (Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3}. - Abstract: In this study, 1 − x(Na{sub 0.5}K{sub 0.5})NbO{sub 3}–x(Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} ceramics were fabricated using the conventional mixed oxide method. The effects of the addition of (Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} on the structural and electrical properties of the specimens were investigated for their application in piezoelectric devices. As the results of X-ray diffractionmore » analysis show, all specimens display the typical polycrystalline perovskite structure without the presence of the second phase. Sintered densities increased with an increase in the amount of (Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} added and the specimen with 0.08 mol% of (Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} added showed the maximum value of 4.54 g/cm{sup 3}. Both average grain size and densification increased with an increase in the amount of (Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3}. The electromechanical coupling factor, dielectric constant ϵ{sub r}, dielectric loss tan δ, d{sub 33} and Curie temperature of the 0.92(Na{sub 0.5}K{sub 0.5})NbO{sub 3}–0.08(Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} specimens doped with 0.08 mol% of (Sr{sub 0.5}Ca{sub 0.5})TiO{sub 3} were 0.31, 1338, 0.021, 138 and 445 °C, respectively.« less

Improved associative recall of binary data in volume holographic memories

NASA Astrophysics Data System (ADS)

Betzos, George A.; Laisné, Alexandre; Mitkas, Pericles A.

1999-11-01

A new technique is presented that improves the results of associative recall in a volume holographic memory system. A background is added to the normal search argument to increase the amount of optical power that is used to reconstruct the reference beams in the crystal. This is combined with post-processing of the captured image of the reference beams. The use of both the background and post-processing greatly improves the results by allowing associative recall using small arguments. In addition, the number of false hits is reduced and misses are virtually eliminated.

Two advertisements for TV drug ads.

PubMed

Bodenheimer, Thomas

2003-01-01

The paper by Joel Weissman and colleagues addresses the increasingly important topic of the effects of direct-to-consumer advertising (DTCA) by pharmaceutical companies. The authors claim that their results should be reassuring to "those concerned about potential adverse health care consequences of DTCA". However, the study and analysis of the data are marred by several flaws that diminish the importance and relevance of the findings, including weakness in design, overgenerous interpretations, and failure to address key questions. Rather than informing the debate, the study amounts to little more than an advertisement for drug advertisements.

Effect of salt on turbulent drag reduction of xanthan gum.

PubMed

Hong, Cheng Hai; Choi, Hyoung Jin; Zhang, Ke; Renou, Frederic; Grisel, Michel

2015-05-05

The turbulent flow of an aqueous KCl solution driven by a rotating disc in a closed chamber showed significant drag reduction (DR) when a small amount of xanthan gum (XG) was added. The effects of the experimental parameters (XG and KCl concentrations, and time) on the drag reduction efficiency were examined. While the DR efficiency of XG decreased with increasing salt (KCl) concentration, the time-dependent DR efficiency was found to be fitted well using Brostow model equation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Current measurement apparatus

DOEpatents

Umans, Stephen D.

2008-11-11

Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

Discovering a Change in Equilibrium Constant with Change in Ionic Strength: An Empirical Laboratory Experiment for General Chemistry

NASA Astrophysics Data System (ADS)

Stolzberg, Richard J.

1999-05-01

Students are challenged to investigate the hypothesis that an equilibrium constant, Kc, measured as a product and quotient of molar concentrations, is constant at constant temperature. Spectrophotometric measurements of absorbance of a solution of Fe3+(aq) and SCN-(aq) treated with different amounts of KNO3 are made to determine Kc for the formation of FeSCN2+(aq). Students observe a regular decrease in the value of Kc as the concentration of added KNO3 is increased.

JPRS Report, Science & Technology, Japan, Powder Metallurgy Technology

DTIC Science & Technology

1988-12-13

100 mO« 132 Hz i i i i -K H JL x’ c-p’an« (film) ! f • j 0 60 70 M TOO 90 1C Figure 3. Real and...necessary to develop a new manufacturing process focusing on the control of grain orientation. References 1. M . Okada, et al., Jpn. J. Appl. Phys. 27...Tc drops as the amount of Sr added is increased. References 1. M . Oda, et al., Jpn. J. Phys., 26, L804, 1987. 2. Z. Qi-rui, et al., Solid State

Chemical approach for controlling nadimide cure temperature and rate

NASA Technical Reports Server (NTRS)

Lauver, R. W. (Inventor)

1985-01-01

Polyimide resins suitable for use as composite matrix materials are formed by copolymerization of maleic and norbornenyl end-capped monomers and oligomers. The copolymers can be cured at temperatures under about 300 C. by controlling the available concentration of the maleic end-capped reactant. This control can be achieved by adding sufficient amounts of said maleic reactant, or by chemical modification of either copolymer, to increase Diels-Alder retrogression of the norbornenyl-capped reactant and/or holding initiation and polymerization to a rate compatible with the availability of the maleic-capped reactant.

Chemical approach for controlling nadimide cure temperature and rate

NASA Technical Reports Server (NTRS)

Lauver, R. W. (Inventor)

1984-01-01

Polyimide resins suitable for use as composite matrix materials are formed by copolymerization of maleic and norbornenyl endcapped monomers and oligomers. The copolymers can be cured at temperatures under about 300 C by controlling the available concentration of the maleic capped reactant. This control can be achieved by adding sufficient amounts of said maleic reactant, or by chemical modification of either copolymer, so as to either increase Diels-Alder retrogression of the norbornenyl capped reactant and/or holding initiation and polymerization to a rate compatible with the availability of the maleic capped reactant.

Chemical approach for controlling nadimide cure temperature and rate

NASA Technical Reports Server (NTRS)

Lauver, R. W. (Inventor)

1985-01-01

Polyimide resins suitable for use as composite matrix materials are formed by copolymerization of maleic and norbornenyl endcapped monomers and oligomers. The copolymers can be cured at temperatures under about 300 C by controlling the available concentration of the maleic endcapped reactant. This control is achieved by adding sufficient amounts of said maleic reactant or by chemical modification of either copolymer, to either increase Diels-Alder retrogression of the norbornenyl capped reactant and/or hold initiation and polymerization to a rate compatible with the availability of the maleic capped reactant.

Value added liquid products from waste biomass pyrolysis using pretreatments.

PubMed

Das, Oisik; Sarmah, Ajit K

2015-12-15

Douglas fir wood, a forestry waste, was attempted to be converted into value added products by pretreatments followed by pyrolysis. Four different types of pretreatments were employed, namely, hot water treatment, torrefaction, sulphuric acid and ammonium phosphate doping. Subsequently, pyrolysis was done at 500°C and the resulting bio-oils were analysed for their chemical composition using Karl Fischer titration, thermogravimetry, ion exchange, and gas chromatography. Pretreatment with acid resulted in the highest yield of bio-oil (~60%). The acid and salt pretreatments were responsible for drastic reduction in the lignin oligomers and enhancement of water content in the pyrolytic liquid. The quantity of xylose/mannose reduced as a result of pretreatments. Although, the content of fermentable sugars remained similar across all the pretreatments, the yield of levoglucosan increased. Pretreatment of the biomass with acid yielded the highest amount of levoglucosan in the bio-oil (13.21%). The acid and salt pretreatments also elevated the amount of acetic acid in the bio-oils. Addition of acid and salt to the biomass altered the interaction of cellulose-lignin in the pyrolysis regime. Application of pretreatments should be based on the intended end use of the liquid product having a desired chemical composition. Copyright © 2015 Elsevier B.V. All rights reserved.

The effects of increasing amounts of milk replacer powder added to whole milk on passage rate, nutrient digestibility, ruminal development, and body composition in dairy calves.

PubMed

Azevedo, R A; Machado, F S; Campos, M M; Lopes, D R G; Costa, S F; Mantovani, H C; Lopes, F C F; Marcondes, M I; Pereira, L G R; Tomich, T R; Coelho, S G

2016-11-01

The aim of this study was to evaluate the effects on feed intake, calf performance, feed efficiency, fecal score, passage rate, apparent nutrient digestibility, development of rumen and other organs, and body composition of increasing the total solids content of liquid feed (whole milk) by adding increasing amounts of milk replacer powder during the preweaning period. Crossbred Holstein-Gyr calves (n=32) were assigned to 1 of 4 treatments (n=8 per group), which consisted of different total solids concentrations: 12.5, 15.0, 17.5, and 20.0% of liquid feed. Calves received 6 L of liquid per day, divided into 2 equal meals (0800 and 1600 h) and provided in buckets, from 5 to 55d of age. Starter and water were provided ad libitum during the entire experiment. At 56d of age, animals were killed. Laboratory analysis determined that the actual total solids contents of the liquid feed were 13.5, 16.1, 18.2, and 20.4%, for the proposed 12.5, 15.0, 17.5, and 20.0% total solids treatments, respectively. The osmolality of liquid feed treatments was 265 to 533 mOsm/L. Fecal score was similar among treatments, except for wk 2 and 7. Intake of liquid feed was similar among treatments from 6wk of age. During wk 4, 5, and 6, we detected a linear decrease in starter intake. After wk 7, we observed greater starter intake for calves fed approximately 16.1% total solids. Water intake, feed efficiency, and withers height were similar among treatments. Increasing concentrations of total solids in liquid feed quadratically affected average daily gain, final body weight, and empty body weight. We observed a greater average daily gain for calves fed approximately 20.4% total solids. Passage rate, nutrient digestibility, development of pre-stomachs and intestine, and body composition were similar among treatments. Increasing the concentration of total solids in liquid feed up to 20.4% reduced starter intake between 4 and 6wk of life, but increased average daily gain. It did not affect passage rate, nutrient digestibility, ruminal and organ development, or body composition in calves during the preweaning period, indicating that this strategy may be a viable alternative for feeding without increasing the total volume of liquid feed provided to dairy calves. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Improvement of high-yield pulp properties by using a small amount of bleached wheat straw pulp.

PubMed

Zhang, Hongjie; He, Zhibin; Ni, Yonghao

2011-02-01

In this study, the potential of using bleached wheat straw pulp (BWSP) was explored to improve the tensile strength of the high-yield pulp (HYP) while preserving its high bulk property. The results showed that with the addition of 5-10% refined BWSP, the HYP tensile strength can be increased by about 10-20% without sacrificing the bulk. Similar results were obtained by adding refined BWSP into a mixed furnish of bleached kraft pulps (BKPs) and HYP. The explanation was that micro fines from refined BWSP can act as binders to improve the HYP interfiber bonding, as a result, the HYP tensile strength can be improved by using a small amount of BWSP, while the HYP bulk is not significantly affected. Copyright © 2010 Elsevier Ltd. All rights reserved.

Tailoring barrier properties of thermoplastic corn starch-based films (TPCS) by means of a multilayer design.

PubMed

Fabra, María José; López-Rubio, Amparo; Cabedo, Luis; Lagaron, Jose M

2016-12-01

This work compares the effect of adding different biopolyester electrospun coatings made of polycaprolactone (PCL), polylactic acid (PLA) and polyhydroxybutyrate (PHB) on oxygen and water vapour barrier properties of a thermoplastic corn starch (TPCS) film. The morphology of the developed multilayer structures was also examined by Scanning Electron Microscopy (SEM). Results showed a positive linear relationship between the amount of the electrospun coatings deposited onto both sides of the TPCS film and the thickness of the coating. Interestingly, the addition of electrospun biopolyester coatings led to an exponential oxygen and water vapour permeability drop as the amount of the electrospun coating increased. This study demonstrated the versatility of the technology here proposed to tailor the barrier properties of food packaging materials according to the final intended use. Copyright © 2016 Elsevier Inc. All rights reserved.

Fluid resuscitation in acute pancreatitis

PubMed Central

Aggarwal, Aakash; Manrai, Manish; Kochhar, Rakesh

2014-01-01

Acute pancreatitis remains a clinical challenge, despite an exponential increase in our knowledge of its complex pathophysiological changes. Early fluid therapy is the cornerstone of treatment and is universally recommended; however, there is a lack of consensus regarding the type, rate, amount and end points of fluid replacement. Further confusion is added with the newer studies reporting better results with controlled fluid therapy. This review focuses on the pathophysiology of fluid depletion in acute pancreatitis, as well as the rationale for fluid replacement, the type, optimal amount, rate of infusion and monitoring of such patients. The basic goal of fluid epletion should be to prevent or minimize the systemic response to inflammatory markers. For this review, various studies and reviews were critically evaluated, along with authors’ recommendations, for predicted severe or severe pancreatitis based on the available evidence. PMID:25561779

Effect of Ferric Ions on Bioleaching of Pentlandite Concentrate

NASA Astrophysics Data System (ADS)

Li, Qian; Lai, Huimin; Yang, Yongbin; Xu, Bin; Jiang, Tao; Zhang, Yaping

The intensified effects of ferric phosphate and ferric sulfate as nutrient and oxidant on the bioleaching of pentlandite concentrate with Acidithiobacillus ferrooxidans and Sulfobacillus thermosulfidooxidans were studied. The results showed that the nickel leaching rate was enhanced continuously with FePO4 or Fe2(SO4)3 added in certain extent, but declined at excess. For A. ferrooxidans, the optimum additive amount of Fe2(SO4)3 was 6.63mM/L and the nickel leaching rate reached 71.76%. Compared with Fe2(SO4)3, the optimum additive amount of FePO4 was 26.52mM/L for both strains. For A. ferrooxidans and S. thermosulfidooxidans, the nickel leaching rate could increase to 98.06% and 98.11% which was 1.83 times and 1.55 times of the leachig rate of blank test, respectively.

Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs)

NASA Astrophysics Data System (ADS)

Nabinejad, Omid; Sujan, D.; Rahman, Muhammad Ekhlasur; Liew, Willey Yun Hsien; Davies, Ian J.

2017-12-01

This paper presents an experimental study on the development of hybrid composites comprising of multi-walled carbon nanotubes (MWCNTs) and natural filler (oil palm shell (OPS) powder) within unsaturated polyester (UP) matrix. The results revealed that the dispersion of pristine MWCNTs in the polymer matrix was strongly enhanced through use of the solvent mixing method assisted by ultrasonication. Four different solvents were investigated, namely, ethanol, methanol, styrene and acetone. The best compatibility with minimum side effects on the curing of the polyester resin was exhibited by the styrene solvent and this produced the maximum tensile and flexural properties of the resulting nanocomposites. A relatively small amount of pristine MWCNTs well dispersed within the natural filler polyester composite was found to be capable of improving mechanical properties of hybrid composite. However, increasing the MWCNT amount resulted in increased void content within the matrix due to an associated rapid increase in viscosity of the mixture during processing. Due to this phenomenon, the maximum tensile and flexural strengths of the hybrid composites were achieved at MWCNT contents of 0.2 to 0.4 phr and then declined for higher MWCNT amounts. The flexural modulus also experienced its peak at 0.4 phr MWCNT content whereas the tensile modulus exhibited a general decrease with increasing MWCNT content. Thermal stability analysis using TGA under an oxidative atmosphere showed that adding MWCNTs shifted the endset degradation temperature of the hybrid composite to a higher temperature.

Quantifying capital goods for biological treatment of organic waste.

PubMed

Brogaard, Line K; Petersen, Per H; Nielsen, Peter D; Christensen, Thomas H

2015-02-01

Materials and energy used for construction of anaerobic digestion (AD) and windrow composting plants were quantified in detail. The two technologies were quantified in collaboration with consultants and producers of the parts used to construct the plants. The composting plants were quantified based on the different sizes for the three different types of waste (garden and park waste, food waste and sludge from wastewater treatment) in amounts of 10,000 or 50,000 tonnes per year. The AD plant was quantified for a capacity of 80,000 tonnes per year. Concrete and steel for the tanks were the main materials for the AD plant. For the composting plants, gravel and concrete slabs for the pavement were used in large amounts. To frame the quantification, environmental impact assessments (EIAs) showed that the steel used for tanks at the AD plant and the concrete slabs at the composting plants made the highest contribution to Global Warming. The total impact on Global Warming from the capital goods compared to the operation reported in the literature on the AD plant showed an insignificant contribution of 1-2%. For the composting plants, the capital goods accounted for 10-22% of the total impact on Global Warming from composting. © The Author(s) 2015.

Updated US Department of Agriculture Food Patterns meet goals of the 2010 dietary guidelines.

PubMed

Britten, Patricia; Cleveland, Linda E; Koegel, Kristin L; Kuczynski, Kevin J; Nickols-Richardson, Sharon M

2012-10-01

The US Department of Agriculture Food Patterns were updated for the 2010 Dietary Guidelines for Americans to meet new nutrition goals and incorporate results of food pattern modeling requested by the Dietary Guidelines Advisory Committee. The purpose of this article is to describe the process used and changes in the updated patterns. Changes include renaming the Meat and Beans and Milk Groups to the Protein Foods and Dairy Groups, respectively, to be more encompassing of foods in each. Vegetable subgroups now provide more achievable intake recommendations. Calcium-fortified soymilk is now included in the Dairy Group because of its similarity to foods in that group. Increased amounts of seafoods are recommended in the Protein Foods Group, balanced by decreased amounts of meat and poultry. A limit on calories from solid fats and added sugars is included, replacing the previous discretionary calorie allowance and emphasizing the need to choose nutrient-dense forms of foods. Lacto-ovo vegetarian and vegan patterns that meet nutrition goals were created by making substitutions in the Protein Foods Group, and for vegan patterns, in the Dairy Group. Patterns identify food choices that meet nutritional needs within energy allowances and encourage choosing a variety of foods. They rely on foods in nutrient-dense forms, including a limited amount of calories from solid fats and added sugars. The Food Patterns provide a useful template for educating consumers about healthful food choices while highlighting a large gap between choices many Americans make and healthy eating patterns. Copyright © 2012 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

The impact of pH and calcium on the uptake of fluoride by tea plants (Camellia sinensis L.).

PubMed

Ruan, Jianyun; Ma, Lifeng; Shi, Yuanzhi; Han, Wenyan

2004-01-01

Tea plants (Camellia sinensis L.) accumulate large amounts of fluoride (F) from soils containing normal F concentrations. The present experiments examined the effects of pH and Ca on F uptake by this accumulating plant species. The effect of pH was assessed in two experiments, one using uptake solutions with different pHs, and the other using lime, as CaO, applied to the soil. The effect of Ca was examined by analysing F concentrations in plants supplied with varying amounts of Ca, as Ca(NO3)2, either in uptake solutions or through the soil. F uptake was highest at solution pH 5.5, and significantly lower at pH 4.0. In the soil experiment, leaf F decreased linearly with the amounts of lime, which raised the soil pH progressively from 4.32 to 4.91, 5.43, 5.89 and, finally, 6.55. Liming increased the water-soluble F content of the soil. Including Ca in the uptake solution or adding Ca to soil significantly decreased leaf F concentrations. The distribution pattern of F in tea plants was not altered by Ca treatment, with most F being allocated to leaves. The activity of F- in the uptake solution was unaffected and water-soluble F in the soil was sometimes increased by added Ca. F uptake by tea plants, which are inherently able to accumulate large quantities of F, was affected both by pH and by Ca levels in the medium. The reduced F uptake following Ca application appeared not to be due simply to the precipitation of CaF2 in solution and soil or to the complexing of Ca and F in roots, although these factors cannot be dismissed. It was more likely due to the effect of Ca on the properties of cell wall or membrane permeability in the solution experiments, and to alteration of F speciations and their quantities in soil solutions following Ca application.

B Removal by Zr Addition in Electromagnetic Solidification Refinement of Si with Si-Al Melt

NASA Astrophysics Data System (ADS)

Lei, Yun; Ma, Wenhui; Sun, Luen; Dai, Yongnian; Morita, Kazuki

2016-02-01

This study investigated a new process of enhancing B removal by adding small amounts of Zr in the electromagnetic solidification refinement of Si with Si-Al melt. B in Si was removed by as much as 97.2 pct by adding less than 1057 ppma Zr, and the added Zr was removed by as much as 99.7 pct. In addition, Zr is more effective in enhancing B removal than Ti in the same electromagnetic solidification refining process.

Osmotic tolerance limits and membrane permeability characteristics of stallion spermatozoa treated with cholesterol.

PubMed

Glazar, Amanda I; Mullen, Steven F; Liu, Jun; Benson, James D; Critser, John K; Squires, Edward L; Graham, James K

2009-10-01

Stallion spermatozoa exhibit osmotic damage during the cryopreservation process. Recent studies have shown that the addition of cholesterol to spermatozoal membranes increases the cryosurvival of bull, ram and stallion spermatozoa, but the exact mechanism by which added cholesterol improves cryosurvival is not understood. The objectives of this study were to determine if adding cholesterol to stallion sperm membranes alters the osmotic tolerance limits and membrane permeability characteristics of the spermatozoa. In experiment one, stallion spermatozoa were treated with cholesterol-loaded cyclodextrin (CLC), subjected to anisotonic solutions and spermatozoal motility analyzed. The spermatozoa were then returned to isotonic conditions and the percentages of motile spermatozoa again determined. CLC treatment increased the osmotic tolerance limit of stallion spermatozoa in anisotonic solutions and when returned to isotonic conditions. The second and third experiments utilized an electronic particle counter to determine the plasma membrane characteristics of stallion spermatozoa. In experiment two, stallion spermatozoa were determined to behave as linear osmometers. In experiment three, spermatozoa were treated with CLC, incubated with different cryoprotectants (glycerol, ethylene glycol or dimethyl formamide) and their volume excursions measured during cryoprotectant removal at 5 degrees and 22 degrees C. Stallion spermatozoa were less permeable to the cryoprotectants at 5 degrees C than 22 degrees C. Glycerol was the least permeable cryoprotectant in control cells. The addition of CLC's to spermatozoa increased the permeability of stallion spermatozoa to the cryoprotectants. Therefore, adding cholesterol to spermatozoal membranes reduces the amount of osmotic stress endured by stallion spermatozoa during cryopreservation.

32 CFR 644.114 - Acquisition by declaration of taking.

Code of Federal Regulations, 2012 CFR

2012-07-01

... amount for the entire interest holding to have added value, for operational or other reasons, because it... determination be made as to whether the value of growing crops should be added to the value of the land... purchase due to failure to reach an agreement with the owners as to value, inability to contact the owners...

32 CFR 644.114 - Acquisition by declaration of taking.

Code of Federal Regulations, 2014 CFR

2014-07-01

... amount for the entire interest holding to have added value, for operational or other reasons, because it... determination be made as to whether the value of growing crops should be added to the value of the land... purchase due to failure to reach an agreement with the owners as to value, inability to contact the owners...

32 CFR 644.114 - Acquisition by declaration of taking.

Code of Federal Regulations, 2013 CFR

2013-07-01

... amount for the entire interest holding to have added value, for operational or other reasons, because it... determination be made as to whether the value of growing crops should be added to the value of the land... purchase due to failure to reach an agreement with the owners as to value, inability to contact the owners...

75 FR 52458 - Disclosures of Return Information Reflected on Returns to Officers and Employees of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

.... Adding paragraphs (b)(3)(xxix) and (b)(3)(xxx). 0 3. Revising paragraph (e). 0 4. Adding a sentence at... reported on Form 1096 transmitting Forms 1099-MISC. (xxx) Total amount reported on Form 1096 transmitting Forms 1099- MISC. * * * * * (e) Effective/applicability date. Paragraph (b)(3)(xxix) through (b)(3)(xxx...

Effectiveness Measures for Cross-Sectional Studies: A Comparison of Value-Added Models and Contextualised Attainment Models

ERIC Educational Resources Information Center

Lenkeit, Jenny

2013-01-01

Educational effectiveness research often appeals to "value-added models (VAM)" to gauge the impact of schooling on student learning net of the effect of student background variables. A huge amount of cross-sectional studies do not, however, meet VAM's requirement for longitudinal data. "Contextualised attainment models (CAM)"…

Incorporation of buriti endocarp flour in gluten-free whole cookies as potential source of dietary fiber.

PubMed

Becker, Fernanda Salamoni; Damiani, Clarissa; de Melo, Adriane Alexandre Machado; Borges, Paulo Rogério Siriano; Boas, Eduardo Valério de Barros Vilas

2014-12-01

Cookies were prepared by replacing a mixture of brown rice flour (70%) and corn starch (30%) (BRFCS) by buriti endocarp flour (BEF) (0, 5, 10, 15 or 20%). BEF figured as a potential source of dietary fiber (70.53 g 100 g(-1)), especially of insoluble fiber (67.50 g 100 g(-1)), and gluten-free whole cookies showed increased dietary fiber content by adding 5, 10, 15 and 20% BEF (8.58 to 20.02 g 100 g(-1)) when compared to control cookie (6.91 g 100 g(-1)). The addition of BEF affected diameter, spread ratio, color and texture of cookies. All cookies added with BEF were darker, harder and presented smaller diameter and smaller spread ratio than the control cookie. These difference increased proportionally to level of substitution of BRFSC by BEF. Gluten-free whole cookies with up to 15% BEF were well accepted by consumers. Therefore, the use of BEF in cookies may increase the availability of functional ingredients source of dietary fiber for celiac consumers, add economic value to buriti processing by-products and decrease environmental impacts due to the high amounts of waste generated by buriti processing industries.

Microstructure-mechanical property relationships for Al-Cu-Li-Zr alloys with minor additions of cadmium, indium or tin

NASA Technical Reports Server (NTRS)

Blackburn, L. B.; Starke, E. A., Jr.

1989-01-01

Minor amounts of cadmium, indium or tin were added to a baseline alloy with the nominal composition of Al-2.4Cu-2.4Li-0.15Zr. These elements were added in an attempt to increase the age-hardening response of the material such that high strengths could be achieved through heat-treatment alone, without the need for intermediate mechanical working. The alloy variant containing indium achieved a higher peak hardness in comparison to the other alloy variations, including the baseline material, when aged at temperatures ranging from 160 C to 190 C. Tensile tests on specimens peak-aged at 160 indicated the yield strength of the indium-bearing alloy increased by approximately 15 percent compared to that of the peak-aged baseline alloy. In addition, the yield strength obtained in the indium-bearing alloy was comparable to that reported for similar baseline material subjected to a 6 percent stretch prior to peak-aging at 190 C. The higher strength levels obtaied for the indium-bearing alloy are attributed to increased number densities and homogeneity of both the T1 and theta-prime phases, as determined by TEM studies.

Use of Adhesion Promoters in Asphalt Mixtures

NASA Astrophysics Data System (ADS)

Cihlářová, Denisa; Fencl, Ivan; Cápayová, Silvia; Pospíšil, Petr

2018-03-01

The purpose of asphalt binder as a significant binder in road constructions is to permanently bind aggregates of different compositions and grain sizes. The asphalt binder itself does not have suitable adhesiveness, so after a period of time, bare grains can appear. This results in a gradual separation of the grains from an asphalt layer and the presence of potholes in a pavement. Adhesion promoters or adhesive agents are important and proven promoters in practice. They are substances mainly based on the fatty acids of polyamides which should increase the reliability of the asphalt's binder adhesion to the aggregates, thus increasing the lifetime period of the asphalt mixture as well as its resistance to mechanical strain. The amount of a promoter or agent added to the asphalt mixture is negligible and constitutes about 0.3% of the asphalt's binder weight. Nevertheless, even this quantity significantly increases the adhesive qualities of an asphalt binder. The article was created in cooperatation with the Slovak University of Technology, in Bratislava, Slovakia, and focuses on proving the new AD2 adhesive additive and comparing it with the Addibit and Wetfix BE promoters used on aggregates from the Skuteč - Litická and Bystřec quarries.

Effects of Exogenous Gibberellic Acid3 on Iron and Manganese Plaque Amounts and Iron and Manganese Uptake in Rice

PubMed Central

Guo, Yue; Zhu, Changhua; Gan, Lijun; Ng, Denny; Xia, Kai

2015-01-01

Gibberellins (GA) regulate various components of plant development. Iron and Mn plaque result from oxiding and hydroxiding Fe and Mn, respectively, on the roots of aquatic plant species such as rice (Oryza sativa L.). In this study, we found that exogenous gibberellic acid3 (GA3) spray decreased Fe plaque, but increased Mn plaque, with applications of Kimura B nutrient solution. Similar effects from GA3, leading to reduced Fe plaque and increased Mn plaque, were also found by scanning electron microscopy and energy dispersive X-ray spectrometric microanalysis. Reduced Fe plaque was observed after applying GA3 to the groups containing added Fe2+ (17 and 42 mg•L-1) and an increasing trend was detected in Mn plaques of the Mn2+ (34 and 84 mg•L-1) added treatments. In contrast, an inhibitor of GA3, uniconazole, reversed the effects of GA3. The uptake of Fe or Mn in rice plants was enhanced after GA3 application and Fe or Mn plaque production. Strong synergetic effects of GA3 application on Fe plaque production were detected. However, no synergetic effects on Mn plaque production were detected. PMID:25710173

Stability of a novel corticosteroid nasal irrigation solution: betamethasone 17-valerate added to extemporaneously prepared nasal irrigation solutions.

PubMed

Ong, Kheng Yong; Lim, Wei Ching; Ooi, Shing Ming; Loh, Zhi Hui; Kong, Ming Chai; Chan, Lai Wah; Heng, Paul Wan Sia

2017-05-01

There are no commercially available nasal irrigation solutions containing corticosteroids. Instead, such preparations are extemporaneously prepared by adding existing corticosteroid formulations to nasal irrigation solutions. The stability of the corticosteroid betamethasone 17-valerate (B17V), in nasal irrigation solutions of different compositions and pH and stored under different temperatures, was studied to determine the optimal choice of solution and storage conditions. Triplicate extemporaneous preparations made with B17V were prepared by adding a predetermined volume of B17V lotion to each nasal irrigation solution: normal saline (NS), sodium bicarbonate (NaHCO 3 ) powder dissolved in tap water, and a commercially available powder mixture (FLO Sinus Care Powder), dissolved in tap water or pre-boiled tap water. Preparations were stored at 30°C and 4°C. Sampling was carried out at 0, 1, 2, 6, and 24 hours. The concentrations of B17V and its degradation compound, betamethasone 21-valerate (B21V), were determined by high-performance liquid chromatography. Preparations stored at 30°C contained a lower amount of B17V and higher amount of B21V than those stored at 4°C. B17V stability in nasal irrigation solutions decreased in the following order: NS, FLO in fresh tap water, FLO in pre-boiled tap water, and NaHCO 3 . The degradation rate of B17V increased with higher storage temperature and higher pH. B17V is most stable when added to NS and least stable in NaHCO 3 solution. FLO solution prepared with either cooled boiled water or tap water is an alternative if administered immediately. Storage at 4°C can better preserve stability of B17V, over a period of 24 hours. © 2017 ARS-AAOA, LLC.

Alzheimers disease: cost cuts call for novel drugs development and national strategy.

PubMed

Marešová, Petra; Klímová, Blanka; Kuča, Kamil

Mental health affects the quality of life for a large number of individuals and family members. Currently, globally costs for people with dementia amount to more than 1% of gross domestic product (GDP). In the future, the growth of expenditure is expected with regard to the fact that the population of developed countries is aging and the dementia is closely associated with increasing age. It is evident that governments have to allocate adequate financial, material and human resources to address a health problem on this scale. The purpose of this article is to explore the current state of treatment and care of patients suffering from Alzheimers disease (AD), analyze direct and indirect health care costs resulting from this disease. In addition, the authors of this article draw attention to the implementation of astrategic plan which would handle all the aspects of AD, including the research of drugs development since nowadays there are not still many drugs which would improve AD patients state, particularly in the early phases, as well as there does not exist any well-functioning national strategic plan in the Czech Republic which would bring a radical improvement in reducing the effects of AD.Key words: Alzheimers disease costs treatment strategic plan.

32 CFR 564.58 - Determination of amount allowable.

Code of Federal Regulations, 2011 CFR

2011-07-01

... immediately prior to the accident or incident. Subject to the foregoing, the amount allowable is the cost... which it was immediately prior to the accident or incident. However, if as the result of the repairs... accident or incident, the difference in value will be added to the cost of repairs in determining the...

32 CFR 564.58 - Determination of amount allowable.

Code of Federal Regulations, 2010 CFR

2010-07-01

... immediately prior to the accident or incident. Subject to the foregoing, the amount allowable is the cost... which it was immediately prior to the accident or incident. However, if as the result of the repairs... accident or incident, the difference in value will be added to the cost of repairs in determining the...

32 CFR 564.58 - Determination of amount allowable.

Code of Federal Regulations, 2012 CFR

2012-07-01

... immediately prior to the accident or incident. Subject to the foregoing, the amount allowable is the cost... which it was immediately prior to the accident or incident. However, if as the result of the repairs... accident or incident, the difference in value will be added to the cost of repairs in determining the...

32 CFR 564.58 - Determination of amount allowable.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the property immediately prior to the accident or incident. Subject to the foregoing, the amount... to the condition in which it was immediately prior to the accident or incident. However, if as the... less than that prior to the accident or incident, the difference in value will be added to the cost of...

32 CFR 564.58 - Determination of amount allowable.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the property immediately prior to the accident or incident. Subject to the foregoing, the amount... to the condition in which it was immediately prior to the accident or incident. However, if as the... less than that prior to the accident or incident, the difference in value will be added to the cost of...

20 CFR 404.212 - Computing your primary insurance amount from your average indexed monthly earnings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts... before age 62, and your surviving spouse or surviving divorced spouse is first eligible after 1984, we... monthly earnings and adding the results for each step of the formula. For computations using the benefit...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2014 CFR

2014-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2014-04-01 2014-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2013 CFR

2013-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2013-04-01 2013-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2011 CFR

2011-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2011-04-01 2011-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

26 CFR 1.6662-4 - Substantial understatement of income tax.

Code of Federal Regulations, 2012 CFR

2012-04-01

... understatement of such income tax, there is added to the tax an amount equal to 20 percent of such portion... 26 Internal Revenue 13 2012-04-01 2012-04-01 false Substantial understatement of income tax. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Additions to the Tax, Additional Amounts, and...

Modeling the long-term fate of agricultural nitrate in groundwater in the San Joaquin Valley, California

USGS Publications Warehouse

Chapelle, Francis H.; Campbell, Bruce G.; Widdowson, Mark A.; Landon, Mathew K.

2013-01-01

Nitrate contamination of groundwater systems used for human water supplies is a major environmental problem in many parts of the world. Fertilizers containing a variety of reduced nitrogen compounds are commonly added to soils to increase agricultural yields. But the amount of nitrogen added during fertilization typically exceeds the amount of nitrogen taken up by crops. Oxidation of reduced nitrogen compounds present in residual fertilizers can produce substantial amounts of nitrate which can be transported to the underlying water table. Because nitrate concentrations exceeding 10 mg/L in drinking water can have a variety of deleterious effects for humans, agriculturally derived nitrate contamination of groundwater can be a serious public health issue. The Central Valley aquifer of California accounts for 13 percent of all the groundwater withdrawals in the United States. The Central Valley, which includes the San Joaquin Valley, is one of the most productive agricultural areas in the world and much of this groundwater is used for crop irrigation. However, rapid urbanization has led to increasing groundwater withdrawals for municipal public water supplies. That, in turn, has led to concern about how contaminants associated with agricultural practices will affect the chemical quality of groundwater in the San Joaquin Valley. Crop fertilization with various forms of nitrogen-containing compounds can greatly increase agricultural yields. However, leaching of nitrate from soils due to irrigation has led to substantial nitrate contamination of shallow groundwater. That shallow nitrate-contaminated groundwater has been moving deeper into the Central Valley aquifer since the 1960s. Denitrification can be an important process limiting the mobility of nitrate in groundwater systems. However, substantial denitrification requires adequate sources of electron donors in order to drive the process. In many cases, dissolved organic carbon (DOC) and particulate organic carbon (POC) are the primary electron donors driving active denitrification in groundwater. The purpose of this chapter is to use a numerical mass balance modeling approach to quantitatively compare sources of electron donors (DOC, POC) and electron acceptors (dissolved oxygen, nitrate, and ferric iron) in order to assess the potential for denitrification to attenuate nitrate migration in the Central Valley aquifer.

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications.

PubMed

Karaca, Gizem; Cindoruk, S Siddik; Tasdemir, Yücel

2014-05-01

In the present study, the amounts of polycylic aromatic hydrocarbons (PAHs) penetrating into air during PAH removal applications from the urban treatment sludge were investigated. The effects of the temperature, photocatalyst type, and dose on the PAH removal efficiencies and PAH evaporation were explained. The sludge samples were taken from an urban wastewater treatment plant located in the city of Bursa, with 585,000 equivalent population. The ultraviolet C (UV-C) light of 254 nm wavelength was used within the UV applications performed on a specially designed setup. Internal air of the setup was vacuumed through polyurethane foam (PUF) columns in order to collect the evaporated PAHs from the sludge during the PAH removal applications. All experiments were performed with three repetitions. The PAH concentrations were measured by gas chromatography-mass spectrometry (GC-MS). It was observed that the amounts of PAHs penetrating into the air were increased with increase of temperature, and more than 80% of PAHs migrated to the air consisted of 3-ring compounds during the UV and UV-diethylamine (DEA) experiments at 38 and 53 degrees C. It was determined that 40% decrease was ensured in sigma12 (total of 12) PAH amounts with UV application and 13% of PAHs in sludge penetrated into the air. In the UV-TiO2 applications, a maximum 80% of sigma12 PAH removal was obtained by adding 0.5% TiO2 of dry weight of sludge. The quantity of PAH penetrating into air did not exceed 15%. UV-TiO2 applications ensured high levels of PAH removal in the sludge and also reduced the quantity of PAH penetrating into the air. Within the scope of the samples added with DEA, there was no increase in PAH removal efficiencies and the penetration of PAHs into air was not decreased. In light of these data, it was concluded that UV-TiO2 application is the most suitable PAH removal alternative that restricts the convection of PAH pollution.

Physical evaluation of a maize-based extruded snack with curry powder.

PubMed

Christofides, Vassilis; Ainsworth, Paul; Ibanoğlu, Senol; Gomes, Frances

2004-02-01

Response surface methodology was used to analyze the effect of screw speed (200-280 rpm), feed moisture (13.0-17.0%, wet basis), and curry powder (6.0-9.0%) on the bulk density, lateral expansion, and firmness of maize-based extruded snack with curry powder. Regression equations describing the effect of each variable on the responses were obtained. Responses were most affected by changes in feed moisture followed by screw speed and curry powder (p < 0.05). Lateral expansion increased linearly as the amount of curry powder added was increased whereas a quadratic increase was obtained in lateral expansion with decreasing feed moisture. The firmness of samples was increased with an increase in feed moisture. The bulk density of samples was increased with increasing feed moisture and screw speeds. Radial expansion was found to be a better index to measure the physical properties of the extruded product indicated by a higher correlation coefficient.

Castanea sativa by-products: a review on added value and sustainable application.

PubMed

Braga, Nair; Rodrigues, Francisca; Oliveira, M Beatriz P P

2015-01-01

Castanea sativa Mill. is a species of the family Fagaceae abundant in south Europe and Asia. The fruits (chestnut) are an added value resource in producing countries. Chestnut economic value is increasing not only for nutritional qualities but also for the beneficial health effects related with its consumption. During chestnut processing, a large amount of waste material is generated namely inner shell, outer shell and leaves. Studies on chestnut by-products revealed a good profile of bioactive compounds with antioxidant, anticarcinogenic and cardioprotective properties. These agro-industrial wastes, after valorisation, can be used by other industries, such as pharmaceutical, food or cosmetics, generating more profits, reducing pollution costs and improving social, economic and environmental sustainability. The purpose of this review is to provide knowledge about the type of chestnut by-products produced, the studies concerning its chemical composition and biological activity, and also to discuss other possible applications of these materials.

Effects of artificial sweeteners on body weight, food and drink intake.

PubMed

Polyák, Eva; Gombos, K; Hajnal, B; Bonyár-Müller, K; Szabó, Sz; Gubicskó-Kisbenedek, A; Marton, K; Ember, I

2010-12-01

Artificial sweeteners are widely used all over the world. They may assist in weight management, prevention of dental caries, control of blood glucose of diabetics, and also can be used to replace sugar in foods. In the animal experimentation mice were given oral doses of water solutions of table top artificial sweeteners (saccharin, cyclamate based, acesulfame-K based, and aspartame) the amount of maximum Acceptable Daily Intake (ADI) ad libitum. The controls received only tap water with the same drinking conditions as the treated groups. The mice were fed chow ad libitum.We measured food intake and body weight once a week, water and solutions of artificial sweeteners intake twice a week. The data were analysed by statistical methods (T-probe, regression analysis).Consumption of sweeteners resulted in significantly increased body weight; however, the food intake did not change.These results question the effect of non-caloric artificial sweeteners on weight-maintenance or body weight decrease.

Improvement of nuclide leaching resistance of paraffin waste form with low density polyethylene.

PubMed

Kim, Chang Lak; Park, Joo Wan; Kim, Ju Youl; Chung, Chang Hyun

2002-01-01

Low-level liquid borate wastes have been immobilized with paraffin wax using a concentrate waste drying system (CWDS) in Korean nuclear power plants. The possibility for improving chemical durability of paraffin waste form was suggested in this study. A small amount of low density polyethylene (LDPE) was added to increase the leaching resistance of the existing paraffin waste form. The influence of LDPE on the leaching behavior of waste form was investigated by performing leaching test according to ANSI/ANS-16.1 procedure during 325 days. It was observed that the leaching of nuclides immobilized within paraffin waste form made a marked reduction although little content of LDPE was added to waste form. The acceptance criteria of paraffin waste form associated with leachability index (LI) and compressive strength after the leaching test were fully satisfied with the help of LDPE.

Pore size distribution of OPC and SRPC mortars in presence of chlorides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suryavanshi, A.K.; Scantlebury, J.D.; Lyon, S.B.

1995-07-01

The pore structure of chloride-free ordinary portland cement (OPC) and sulphate resistant portland cement (SRPC) mortars are compared with the corresponding mortars with NaCl and CaCl{sub 2} added during mixing. In both OPC and SRPC mortars the addition of chlorides reduced the total accessible pore volumes compared to the corresponding chloride-free mortars. Also, in the presence of chlorides, the number of coarse pores were increased. These changes in the pore structure are believed to be due to dense calcium silicate hydrate (C-S-H) gel morphology formed in the presence of chlorides. The SRPC showed greater changes in pore structures than themore » OPC with equivalent amounts of chlorides added. This may be due to the lower chloride binding capacity of the SRPC and hence the higher availability of free chlorides to modify the gel morphology.« less

Modulational Instability in a Pair of Non-identical Coupled Nonlinear Electrical Transmission Lines

NASA Astrophysics Data System (ADS)

Eric, Tala-Tebue; Aurelien, Kenfack-Jiotsa; Marius Hervé, Tatchou-Ntemfack; Timoléon Crépin, Kofané

2013-07-01

In this work, we investigate the dynamics of modulated waves non-identical coupled nonlinear transmission lines. Traditional methods for avoiding mode mixing in identical coupled nonlinear electrical lines consist of adding the same number of linear inductors in each branch. Adding linear inductors in a single line leads to asymmetric coupled nonlinear electrical transmission lines which propagate the signal and the mode mixing. On one hand, the difference between the two lines induced the fission for only one mode of propagation. This fission is influenced by the amplitude of the signal and the amount of the input energy as well; it also narrows the width of the input pulse soliton, leading to a possible increasing of the bit rate. On the other hand, the dissymmetry of the two lines converts the network into a good amplifier for the ω_ mode which corresponds to the regime admitting low frequencies.

The cigarette advertising broadcast ban and magazine coverage of smoking and health.

PubMed

Warner, K E; Goldenhar, L M

1989-01-01

At the time of the cigarette broadcast advertising ban, which took effect in 1971, cigarette manufacturers rapidly shifted advertising expenditures from the broadcast media to the print media. In the last year of broadcast advertising and the first year of the ban, cigarette ad expenditures in a sample of major national magazines increased by 49 and then 131 percent in constant dollars. From an 11-year period preceding the ban to an 11-year period following it, these magazines decreased their coverage of smoking and health by 65 percent, an amount that is statistically significantly greater than decreases found in magazines that did not carry cigarette ads and in two major newspapers. This finding adds to evidence that media dependent on cigarette advertising have restricted their coverage of smoking and health. This may have significant implications for public health, as well as raising obvious concerns about the integrity of the profession of journalism.

Production of Aflatoxin on Soybeans

PubMed Central

Gupta, S. K.; Venkitasubramanian, T. A.

1975-01-01

Probable factors influencing resistance to aflatoxin synthesis in soybeans have been investigated by using cultures of Aspergillus parasiticus NRRL 3240. Soybeans contain a small amount of zinc (0.01 μg/g) bound to phytic acid. Autoclaving soybeans at 15 pounds (6803.88 g) for 15 min increases the aflatoxin production, probably by making zinc available. Addition of zinc to both autoclaved and nonautoclaved soybeans promotes aflatoxin production. However, addition of varying levels of phytic acid at a constant concentration of zinc depresses aflatoxin synthesis with an increase in the added phytic acid. In a synthetic medium known to give good yields of aflatoxin, the addition of phytic acid (10 mM) decreases aflatoxin synthesis. PMID:1171654

Growth of GaN single crystals by a Ca- and Ba-added Na flux method

NASA Astrophysics Data System (ADS)

Ukegawa, H.; Konishi, Y.; Fujimori, T.; Miyoshi, N.; Imade, M.; Yoshimura, M.; Kitaoka, Y.; Sasaki, T.; Mori, Y.

2011-02-01

GaN substrates are desirable for fabricating ultra-violet LEDs and LDs, and high-power and high-frequency transistors. High-quality GaN single crystals can be obtained by using Na flux method, but the growth habit of bulk crystals must be controlled. In this study, we investigated the effects of additives (Ca, Ba) on the growth habit and impurity concentration in the crystals. The aspect ratio (c/a) of the crystals was increased by increasing the amount of additives, showing that the growth habit could be changed from the pyramidal shape to the prism shape. Ba concentration was below the detection limit (1x1015 atoms/cm3).

Improvement of Leaching Resistance of Low-level Waste Form in Korea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, J.Y.; Lee, B.C.; Kim, C.L.

2006-07-01

Low-level liquid concentrate wastes including boric acid have been immobilized with paraffin wax using concentrate waste drying system in Korean nuclear power plants since 1995. Small amount of low density polyethylene (LDPE) was added to increase the leaching resistance of the existing paraffin waste form and the influence of LDPE on the leaching behavior of waste form was investigated. It was observed that the leaching of nuclides immobilized within paraffin waste form remarkably reduced as the content of LDPE increased. The acceptance criteria of paraffin waste form associated with leachability index and compressive strength after the leaching test were successfullymore » satisfied with the help of LDPE. (authors)« less

Characterization of Hybrid Epoxy Nanocomposites

PubMed Central

Simcha, Shelly; Dotan, Ana; Kenig, Samuel; Dodiuk, Hanna

2012-01-01

This study focused on the effect of Multi Wall Carbon Nanotubes (MWCNT) content and its surface treatment on thermo-mechanical properties of epoxy nanocomposites. MWCNTs were surface treated and incorporated into two epoxy systems. MWCNT's surface treatments were based on: (a) Titania coating obtained by sol-gel process and (b) a nonionic surfactant. Thermo-mechanical properties improvement was obtained following incorporation of treated MWCNT. It was noticed that small amounts of titania coated MWCNT (0.05 wt %) led to an increase in the glass transition temperature and stiffness. The best performance was achieved adding 0.3 wt % titania coated MWCNT where an increase of 10 °C in the glass transition temperature and 30% in storage modulus were obtained. PMID:28348313

Heating and eating: brown adipose tissue thermogenesis precedes food ingestion as part of the ultradian basic rest-activity cycle in rats.

PubMed

Blessing, William; Mohammed, Mazher; Ootsuka, Youichirou

2012-02-28

Laboratory rats, throughout the 24 hour day, alternate between behaviorally active and non active episodes that Kleitman called the basic rest-activity cycle (BRAC). We previously demonstrated that brown adipose tissue (BAT), body and brain temperatures and arterial pressure and heart rate increase in an integrated manner during behaviorally active phases. Studies show that eating is preceded by increases in body and brain temperature, but whether eating is integrated into the BRAC has not been investigated. In the present study of chronically instrumented, unrestrained Sprague-Dawley rats, peaks in BAT temperature occurred every 96 ± 7 and 162 ± 16 min (mean ± SE, n=14 rats) in dark and light periods respectively, with no apparent underlying regularity. With food available ad libitum, eating was integrated into the BRAC in a temporally precise manner. Eating occurred only after an increase in BAT temperature, commencing 15 ± 1 min (mean ± SE) after the onset of an increase, with no difference between dark and light phases. There were either no or weak preprandial and postprandial relations between intermeal interval and amount eaten during a given meal. Remarkably, with no food available the rat still disturbed the empty food container 16 ± 1 min (p>0.05 versus ad libitum food) after the onset of increases in BAT temperature, and not at other times. Rather than being triggered by changes in levels of body fuels or other meal-associated factors, in sedentary laboratory rats with ad libitum access to food eating commences as part of the ultradian BRAC, a manifestation of intrinsic brain activity. Copyright © 2011 Elsevier Inc. All rights reserved.

Nitric oxide for anammox recovery in a nitrite-inhibited deammonification system.

PubMed

Zekker, Ivar; Rikmann, Ergo; Tenno, Toomas; Loorits, Liis; Kroon, Kristel; Fritze, Hannu; Tuomivirta, Tero; Vabamäe, Priit; Raudkivi, Markus; Mandel, Anni; Dc Rubin, Sergio S C; Tenno, Taavo

2015-01-01

The anaerobic ammonium oxidation (anammox) process is widely used for N-rich wastewater treatment. In the current research the deammonification reactor in a reverse order (first anammox, then the nitrifying biofilm cultivation) was started up with a high maximum N removal rate (1.4 g N m(-2) d(-1)) in a moving bed biofilm reactor. Cultivated biofilm total nitrogen removal rates were accelerated the most by anammox intermediate - nitric oxide (optimum 58 mg NO-N L(-1)) addition. Furthermore, NO was added in order to eliminate inhibition caused by nitrite concentrations (>50 mg [Formula: see text]) increasing [Formula: see text] (2/1, respectively) along with a higher ratio of [Formula: see text] (0.6/1, respectively) than stoichiometrical for this optimal NO amount added during batch tests. Planctomycetales clone P4 sequences, which was the closest (98% and 99% similarity, respectively) relative to Candidatus Brocadia fulgida sequences quantities increase to 1 × 10(6) anammox gene copies g(-1) total suspended solids to till day 650 were determined by quantitative polymerase chain reaction.

Influence of putrescine, cadaverine, spermidine or spermine on the formation of N-nitrosamine in heated cured pork meat.

PubMed

Drabik-Markiewicz, G; Dejaegher, B; De Mey, E; Kowalska, T; Paelinck, H; Vander Heyden, Y

2011-06-15

The influence of biogenic amines (i.e. putrescine, cadaverine, spermidine and spermine) on the N-nitrosamine formation in heated cured lean meat was studied in the presence or absence of sodium nitrite and at different meat processing temperatures. Experimental evidence was produced using gas chromatography with thermal energy analysis detection (GC-TEA). Concentration of N-nitrosamines was modelled as a function of the temperature and the nitrite concentration for two situations, i.e. presence or absence of added biogenic amines to the meat. The significance of the influence of the changing parameters was evaluated by ANOVA (Analysis of Variance). It was found that higher processing temperatures and higher added amounts of sodium nitrite increase the yields of N-nitrosodimethylamine (NDMA) and N-nitrosopiperidine (NPIP). Spermidine and putrescine amplify the formation of NDMA, but spermine and cadeverine do not influence the formation of this N-nitrosamine. Spermidine and cadeverine cause a significant increase of NPIP. Beside N-nitrosopyrrolidine (NPYR) in some rare cases, no other volatile N-nitrosamines are detected. Copyright © 2010 Elsevier Ltd. All rights reserved.

Effect of Opuntia ficus-indica flowers maceration on quality and on heat stability of olive oil.

PubMed

Ammar, Imène; BenAmira, Amal; Khemakem, Ibtihel; Attia, Hamadi; Ennouri, Monia

2017-05-01

This study was focused on the evaluation of the quality and the oxidative stability of olive oil added with Opuntia ficus - indica flowers. Two different amounts of O. ficus - indica flowers were considered 5 and 15% (w/w). The olive oils were evaluated towards their quality, fatty acids profile, total phenol contents and thermal properties by differential scanning calorimetry. The oxidative stability was also monitored by employing the Rancimat and the oven test based on accelerating the oxidation process during storage. The addition of O. ficus - indica flowers induced an increase in free acidity values and a variation in fatty acids profile of olive oils but values remained under the limits required for an extra-virgin olive oil. The obtained olive oils were nutritionally enriched due to the increase in their phenols content. The oxidative stability was generally improved, mainly in olive oil enriched with 5% Opuntia ficus - indica flowers. These findings proved that this enriched olive oil could be considered as a product with a greater added value.

Increases in the amounts of Vibrio spp. in oysters upon addition of exogenous bacteria.

PubMed

Froelich, Brett; Oliver, James

2013-09-01

The bacterial pathogen Vibrio vulnificus is found naturally in brackish coastal waters but can be greatly concentrated by filter-feeding organisms such as shellfish. Numerous experiments in which exogenous V. vulnificus cells are added to oysters in an attempt to measure uptake and depuration have been performed. In nearly all cases, results have shown that laboratory-grown bacteria are rapidly taken up by the oysters but ultimately eliminated, while naturally present Vibrio populations in oysters are resistant to depuration. In this study, oysters harvested during winter months, with low culturable Vibrio concentrations, were incubated in aquaria supplemented with strains of V. vulnificus that were either genotypically or phenotypically distinct from the background bacteria. These exogenous cells were eliminated from the oysters, as previously seen, but other vibrios already inhabiting the oysters responded to the V. vulnificus inoculum by rapidly increasing in number and maintaining a large stable population. The presence of such an oyster-adapted Vibrio population would be expected to prevent colonization by exogenous V. vulnificus cells, thus explaining the rapid depuration of these added bacteria.

Demonstration of sulfur solubility determinations in high waste loading, low-activity waste glasses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, K. M.

2016-04-25

A method recommended by Pacific Northwest National Laboratory (PNNL) for sulfate solubility determinations in simulated low-activity waste glasses was demonstrated using three compositions from a recent Hanford high waste loading glass study. Sodium and sulfate concentrations in the glasses increased after each re-melting step. Visual observations of the glasses during the re-melting process reflected the changes in composition. The measured compositions showed that the glasses met the targeted values. The amount of SO 3 retained in the glasses after washing was relatively high, ranging from 1.6 to 2.6 weight percent (wt %). Measured SnO 2 concentrations were notably low inmore » all of the study glasses. The composition of the wash solutions should be measured in future work to determine whether SnO 2 is present with the excess sulfate washed from the glass. Increases in batch size and the amount of sodium sulfate added did not have a measureable impact on the amount of sulfate retained in the glass, although this was tested for only a single glass composition. A batch size of 250 g and a sodium sulfate addition targeting 7 wt %, as recommended by PNNL, will be used in future experiments.« less

Wood Sawdust/Natural Rubber Ecocomposites Cross-Linked by Electron Beam Irradiation

PubMed Central

Manaila, Elena; Stelescu, Maria Daniela; Craciun, Gabriela; Ighigeanu, Daniel

2016-01-01

The obtaining and characterization of some polymeric eco-composites based on wood sawdust and natural rubber is presented. The natural rubber was cross-linked using the electron beam irradiation. The irradiation doses were of 75, 150, 300 and 600 kGy and the concentrations of wood sawdust were of 10 and 20 phr, respectively. As a result of wood sawdust adding, the physical and mechanical properties such as hardness, modulus at 100% elongation and tensile strength, showed significant improvements. The presence of wood sawdust fibers has a reinforcing effect on natural rubber, similar or better than of mineral fillers. An increase in the irradiation dose leads to the increasing of cross-link density, which is reflected in the improvement of hardness, modulus at 100% elongation and tensile strength of blends. The cross-linking rates, appreciated using the Flory-Rehner equation, have increased with the amount of wood sawdust in blends and with the irradiation dose. Even if the gel fraction values have varied irregularly with the amount of wood sawdust and irradiation dose it was over 90% for all blends, except for the samples without wood sawdust irradiated with 75 kGy. The water uptake increased with increasing of fiber content and decreased with the irradiation dose. PMID:28773626

Wood Sawdust/Natural Rubber Ecocomposites Cross-Linked by Electron Beam Irradiation.

PubMed

Manaila, Elena; Stelescu, Maria Daniela; Craciun, Gabriela; Ighigeanu, Daniel

2016-06-23

The obtaining and characterization of some polymeric eco-composites based on wood sawdust and natural rubber is presented. The natural rubber was cross-linked using the electron beam irradiation. The irradiation doses were of 75, 150, 300 and 600 kGy and the concentrations of wood sawdust were of 10 and 20 phr, respectively. As a result of wood sawdust adding, the physical and mechanical properties such as hardness, modulus at 100% elongation and tensile strength, showed significant improvements. The presence of wood sawdust fibers has a reinforcing effect on natural rubber, similar or better than of mineral fillers. An increase in the irradiation dose leads to the increasing of cross-link density, which is reflected in the improvement of hardness, modulus at 100% elongation and tensile strength of blends. The cross-linking rates, appreciated using the Flory-Rehner equation, have increased with the amount of wood sawdust in blends and with the irradiation dose. Even if the gel fraction values have varied irregularly with the amount of wood sawdust and irradiation dose it was over 90% for all blends, except for the samples without wood sawdust irradiated with 75 kGy. The water uptake increased with increasing of fiber content and decreased with the irradiation dose.

Redesigned Human Metabolic Simulator

NASA Technical Reports Server (NTRS)

Duffield, Bruce; Jeng, Frank; Lange, Kevin

2008-01-01

A design has been formulated for a proposed improved version of an apparatus that simulates atmospheric effects of human respiration by introducing controlled amounts of carbon dioxide, water vapor, and heat into the air. Denoted a human metabolic simulator (HMS), the apparatus is used for testing life-support equipment when human test subjects are not available. The prior version of the HMS, to be replaced, was designed to simulate the respiratory effects of as many as four persons. It exploits the catalytic combustion of methyl acetate, for which the respiratory quotient (the molar ratio of carbon dioxide produced to oxygen consumed) is very close to the human respiratory quotient of about 0.86. The design of the improved HMS provides for simulation of the respiratory effects of as many as eight persons at various levels of activity. The design would also increase safety by eliminating the use of combustion. The improved HMS (see figure) would include a computer that would exert overall control. The computer would calculate the required amounts of oxygen removal, carbon dioxide addition, water addition, and heat addition by use of empirical equations for metabolic profiles of respiration and heat. A blower would circulate air between the HMS and a chamber containing a life-support system to be tested. With the help of feedback from a mass flowmeter, the blower speed would be adjusted to regulate the rate of flow according to the number of persons to be simulated and to a temperature-regulation requirement (the air temperature would indirectly depend on the rate of flow, among other parameters). Oxygen would be removed from the circulating air by means of a commercially available molecular sieve configured as an oxygen concentrator. Oxygen, argon, and trace amounts of nitrogen would pass through a bed in the molecular sieve while carbon dioxide, the majority of nitrogen, and other trace gases would be trapped by the bed and subsequently returned to the chamber. If, as recommended, the oxygen concentrator were of a rotating twelve-bed design, then variations in the product stream could be made very small. Carbon dioxide would be added directly to the circulating air by simple injection from a supply tank. The rate of injection would be maintained at the required rate by use of a mass flowmeter/controller. In the same way, nitrogen would be added to make up for the small amount of nitrogen lost through the oxygen concentrator. Water vapor would be added to the circulating air by heating the corresponding required flow of water to steam in a heat exchanger. More heat, required to complete the simulation of the thermal effect of respiration, would be added through another heat exchanger. Heat would be supplied to both heat exchangers via a hot-oil loop.

Effect of a combination of extract from several plants on cell-mediated and humoral immunity of patients with advanced ovarian cancer.

PubMed

Kormosh, N; Laktionov, K; Antoshechkina, M

2006-05-01

The influence of a plant preparation AdMax (Nulab Inc., Clearwater, FL, USA) on immunity in ovarian cancer patients was studied. The preparation is a combination of dried ethanol/water extracts from roots of Leuzea carthamoides, Rhodiola rosea, Eleutherococcus senticosus and fruits of Schizandra chinensis. Twenty eight patients with stage III-IV epithelial ovarian cancer were treated once with 75 mg/m(2) cisplatin and 600 mg/m(2) cyclophosphamide. Peripheral blood was collected 4 weeks after the chemotherapy. Subclasses of T, B and NK lymphocytes were tested for in the blood samples: CD3, CD4, CD5, CD7, CD8, CD11B, CD16, CD20, CD25, CD38, CD45RA, CD50, CD71 and CD95. Immunoglobulin G, A and M concentrations were also determined. Changes were observed in the following T cell subclasses: CD3, CD4, CD5 and CD8. In patients who took AdMax (270 mg a day) for 4 weeks following the chemotherapy, the mean numbers of the four T cell subclasses were increased in comparison with the mean numbers of the T cell subclasses in patients who did not take AdMax. In patients who took AdMax, the mean amounts of IgG and IgM were also increased. The obtained results suggest that the combination of extracts from adaptogenic plants may boost the suppressed immunity in ovarian cancer patients who are subject to chemotherapy. Copyright 2006 John Wiley & Sons, Ltd.

Increasing the protein content of meals and its effect on daily energy intake

PubMed Central

Blatt, Alexandria D.; Roe, Liane S.

2011-01-01

High-protein preloads have been shown to enhance satiety, but little is known about the satiating effects of protein in more typical situations when meals are consumed ad libitum. In order to investigate the effects of protein in amounts commonly consumed over a day, a crossover study was conducted in 2008. In this experiment, 18 normal-weight women consumed ad libitumlunch and dinner entrées one day a week that were covertly varied in protein content (10, 15, 20, 25, or 30% energy). Entrées were manipulated by substituting animal protein for starchy ingredients and were matched for energy density, fat content, palatability, and appearance. Un-manipulated breakfasts and evening snacks were consumed ad libitum. Participants rated their hunger and fullness before and after meals as well as the taste and appearance of entrées. Data were analyzed using a mixed linear model. Results showed that mean 24-hour protein intake increased significantly across conditions, from 44±2 g/d in the 10% protein condition to 82±6 g/d in the 30% condition. Daily energy intake, however, did not differ significantly across the 10% to 30% protein conditions (means 1870±93, 1887±93, 1848±111, 1876±100, and 1807±98 kcal). There were no significant differences in hunger and fullness ratings across conditions or in taste and appearance ratings of the manipulated entrées. This study showed that varying the protein content of several entrées consumed ad libitum did not differentially influence daily energy intake or affect ratings of satiety. PMID:21272705

Oil Palm Empty Fruit Bunch (OPEFB) Fiber as Lost Circulation Material (LCM) in Water Based Mud (WBM)

NASA Astrophysics Data System (ADS)

Ghazali, N. A.; Sauki, A.; Abu Bakar, N. F.; Mohamed, S.

2018-05-01

Lost Circulation Material (LCM) is an additive used to prevent lost of mud to the formation as a results from natural or induced fractured during drilling operation. Losses of mud could give great impact to the oil industry as it increases mud cost and rig time. The objective of this research was to investigate the effect of size and concentration of Oil Palm Empty Fruit Bunch (OPEFB) as LCM in water based mud (WBM). Several important properties of WBM rheology after adding the OPEFB namely plastic viscosity, apparent viscosity, yield point and gel strength were characterized. The sizes of OPEFB added into the WBM were 150μm, 250μm, 500μm and 1000μm while the concentration of OPEFB used were 5g, 10g, 15g and 20g in 350 mL of WBM. Results indicated that the plastic viscosity and apparent viscosity increased with increasing of the OPEFB concentrations. On the other hand, the plastic viscosity and apparent viscosity decreased with increasing sizes of OPEFB. Yield point increased as the concentration and size of OPEFB increases. This study indicated that OPEFB was effective to be used as LCM for size of 150μm and concentration of 15g whereby it produced least amount of filtrate volume as well as good control in mud rheology.