Science.gov

Sample records for addition detailed studies

  1. Additive Manufacturing of a Microbial Fuel Cell--A detailed study.

    PubMed

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-01-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m(-3) per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments.

  2. Additive Manufacturing of a Microbial Fuel Cell—A detailed study

    PubMed Central

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-01-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m−3 per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments. PMID:26611142

  3. Additive Manufacturing of a Microbial Fuel Cell—A detailed study

    NASA Astrophysics Data System (ADS)

    Calignano, Flaviana; Tommasi, Tonia; Manfredi, Diego; Chiolerio, Alessandro

    2015-11-01

    In contemporary society we observe an everlasting permeation of electron devices, smartphones, portable computing tools. The tiniest living organisms on Earth could become the key to address this challenge: energy generation by bacterial processes from renewable stocks/waste through devices such as microbial fuel cells (MFCs). However, the application of this solution was limited by a moderately low efficiency. We explored the limits, if any, of additive manufacturing (AM) technology to fabricate a fully AM-based powering device, exploiting low density, open porosities able to host the microbes, systems easy to fuel continuously and to run safely. We obtained an optimal energy recovery close to 3 kWh m-3 per day that can power sensors and low-power appliances, allowing data processing and transmission from remote/harsh environments.

  4. DETAIL OF PLAQUE WITH ADDITIONAL DESIGN AND CONSTRUCTION INFORMATION, SOUTHEAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF PLAQUE WITH ADDITIONAL DESIGN AND CONSTRUCTION INFORMATION, SOUTHEAST ABUTMENT - Connecticut Avenue Bridge, Spans Rock Creek & Potomac Parkway at Connecticut Avenue, Washington, District of Columbia, DC

  5. 19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS CONCRETE BLOCK CONSTRUCTION OF ADDITION. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  6. 12. INTERIOR EAST ADDITION DETAIL VIEW, FACING SOUTH. ROLLUP DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. INTERIOR EAST ADDITION DETAIL VIEW, FACING SOUTH. ROLL-UP DOOR ADDITION. ROLL-UP DOOR AND MECHANISM, OFFICE AND MAIN BUILDING SPACE ACCESS VISIBLE. - NASA Industrial Plant, Maintenance Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

  7. Detail, external parabolic antenna (later addition). Note how waveguide was ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail, external parabolic antenna (later addition). Note how waveguide was cut to remove active portion of antenna. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA

  8. 13. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT STAIRWAY, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT STAIRWAY, SHOWING BANNISTER, HANDRAIL AND NEWEL POSTS AND TONGUE AND GROOVE WAINSCOTING. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  9. 14. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT SOUTH WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. INTERIOR DETAIL, FIRST FLOOR OF ADDITION AT SOUTH WALL OF TOILET ROOM, SHOWING ORNATE PAINTED RADIATOR AND TONGUE AND GROOVE WAINSCOTING. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  10. 10. DETAIL OF KITCHEN ADDITION, SHOWING SIDING COPED TO FIT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. DETAIL OF KITCHEN ADDITION, SHOWING SIDING COPED TO FIT LOG WALL OF MAIN HOUSE - Whitcomb Cabin, BZ Corners, Glenwood County Road (Conboy Lake National Wildlife Refuge), Glenwood, Klickitat County, WA

  11. 18. Interior detail, windows, original Library, addition, Engine Stores Building, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Interior detail, windows, original Library, addition, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to north-northwest (90mm lens). Note the milled tongue-and-groove ceiling, and deterioration of bricks near floor level due to rising damp. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

  12. 16. INTERIOR DETAIL, SECOND FLOOR OF ADDITION AT SOUTH WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. INTERIOR DETAIL, SECOND FLOOR OF ADDITION AT SOUTH WALL OF TOILET ROOM, SHOWING LARGER, DIFFERENT STYLE RADIATOR THAN AT FIRST FLOOR, AND TONGUE AND GROOVE WAINSCOTING WITH WOOD CAP TRIM. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  13. 15. DETAILED VIEW OF ENRICHED URANIUM STORAGE TANK. THE ADDITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. DETAILED VIEW OF ENRICHED URANIUM STORAGE TANK. THE ADDITION OF THE GLASS RINGS SHOWN AT THE TOP OF THE TANK HELPS PREVENT THE URANIUM FROM REACHING CRITICALITY LIMITS. (4/12/62) - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  14. 8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF NAILS USED TO ADHERE PORTLAND CEMENT PLASTER, SOUTH ADOBE WALL ADJACENT TO WINDOW Note: Photographs Nos. AZ-159-A-9 through AZ-159-A-10 are photocopies of photographs. The original prints and negatives are located in the SCS Tucson Plant Materials Center, Tucson, Arizona. Photographer Ted F. Spaller. - Tucson Plant Material Center, Machinery Shed, 3241 North Romero Road, Tucson, Pima County, AZ

  15. DETAILED STUDIES OF ELECTRON COOLING FRICTION FORCE.

    SciTech Connect

    FEDOTOV, A.V.; BRUHWILER, D.L.; ABELL, D.T.; SIDORIN, A.O.

    2005-09-18

    High-energy electron cooling for RHIC presents many unique features and challenges. An accurate estimate of the cooling times requires detailed simulation of the electron cooling process. The first step towards such calculations is to have an accurate description of the cooling force. Numerical simulations are being used to explore various features of the friction force which appear due to several effects, including the anisotropy of the electron distribution in velocity space and the effect of a strong solenoidal magnetic field. These aspects are being studied in detail using the VORFAL code, which explicitly resolves close binary collisions. Results are compared with available asymptotic and empirical formulas and also, using the BETACOOL code, with direct numerical integration of less approximate expressions over the specified electron distribution function.

  16. Brown Dwarfs: Discovery and Detailed Studies

    NASA Technical Reports Server (NTRS)

    Kulkarni, Shrinivas R.

    2001-01-01

    We obtained the optical and IR spectra of Gliese 229B and identified Cs, I, and CO features - as expected in theoretical models. Our optical IR spectrum showed that most of the refractory metals have condensed out of the atmosphere and the presence of Cs, I and CO shows evidence for disequilibrium chemistry. We reported orbital evidence for Gliese 229B. The HST measured optical magnitudes provide additional evidence for the absence of dust in the atmosphere of this cool object. The luminosity of brown dwarfs depend on their masses and ages and in order to interpret the results of the survey we have carried out an extensive Monte Carlo analysis. Our conclusion is that warm brown dwarfs are rare, as companions in the orbital period range beyond approximately 30 - 50 AU. The Palomer survey poses no constraint for brown dwarfs in planetary orbits similar to those of the outer planets. We have just started a program of imaging nearby stars with the newly commissioned AO system at Palomar and Keck and have already found a brown dwarf candidate.

  17. 12. DETAIL STUDY: THREE DIFFERENT TYPES OF WINDOW TRIM, RAKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. DETAIL STUDY: THREE DIFFERENT TYPES OF WINDOW TRIM, RAKING BRICK CORNICE AND SECOND FLOOR STRINGCOURSE. (Located at northwest corner of house) - Mulberry, Cooper River, West Branch, Moncks Corner, Berkeley County, SC

  18. 44. Interior detail, stone sill, east study window. This is ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. Interior detail, stone sill, east study window. This is the only stone window sill in the house. - John Bartram House & Garden, House, 54th Street & Lindbergh Boulevard, Philadelphia, Philadelphia County, PA

  19. Detailed kinetic modeling study of n-pentanol oxidation

    DOE PAGES

    Heufer, K. Alexander; Sarathy, S. Mani; Curran, Henry J.; Davis, Alexander C.; Westbrook, Charles K.; Pitz, William J.

    2012-09-28

    To help overcome the world’s dependence upon fossil fuels, suitable biofuels are promising alternatives that can be used in the transportation sector. Recent research on internal combustion engines shows that short alcoholic fuels (e.g., ethanol or n-butanol) have reduced pollutant emissions and increased knock resistance compared to fossil fuels. Although higher molecular weight alcohols (e.g., n-pentanol and n-hexanol) exhibit higher reactivity that lowers their knock resistance, they are suitable for diesel engines or advanced engine concepts, such as homogeneous charge compression ignition (HCCI), where higher reactivity at lower temperatures is necessary for engine operation. The present study presents a detailedmore » kinetic model for n-pentanol based on modeling rules previously presented for n-butanol. This approach was initially validated using quantum chemistry calculations to verify the most stable n-pentanol conformation and to obtain C–H and C–C bond dissociation energies. In addition, the proposed model has been validated against ignition delay time data, speciation data from a jet-stirred reactor, and laminar flame velocity measurements. Overall, the model shows good agreement with the experiments and permits a detailed discussion of the differences between alcohols and alkanes.« less

  20. 48. Interior detail, study, doublehung sash in the south wall. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. Interior detail, study, double-hung sash in the south wall. Most of the windows in the John Bartram House were replaced sometime in the first decades of the nineteenth century. This window contains a slightly wider muntin profile than the later sash and is probably representative of the windows used in phase III construction (Mid-1750's-1770). - John Bartram House & Garden, House, 54th Street & Lindbergh Boulevard, Philadelphia, Philadelphia County, PA

  1. Detailed {beta}-decay study of {sup 33}Ar

    SciTech Connect

    Adimi, N.; Dominguez-Reyes, R.; Alcorta, M.; Borge, M. J. G.; Madurga, M.; Perea, A.; Tengblad, O.; Bey, A.; Blank, B.; Dossat, C.; Giovinazzo, J.; Matea, I.; Fynbo, H. O. U.; Knudsen, H. H.; Suemmerer, K.

    2010-02-15

    The proton-rich nucleus {sup 33}Ar has been studied by detailed proton and {gamma}-ray spectroscopy at the low-energy facility of SPIRAL at GANIL. Proton and {gamma}-ray singles and coincidence measurements allowed to establish a quasicomplete decay scheme of this nucleus. By comparing the proton intensity to different daughter states, tentative spin assignments have been made for some of the states of {sup 33}Cl. The Gamow-Teller strength distribution is deduced and compared to shell-model calculations and a quenching factor is determined. States close to the isobaric analog state are searched for with respect to isospin mixing.

  2. A thermoacoustic-Stirling heat engine: detailed study

    PubMed

    Backhaus; Swift

    2000-06-01

    A new type of thermoacoustic engine based on traveling waves and ideally reversible heat transfer is described. Measurements and analysis of its performance are presented. This new engine outperforms previous thermoacoustic engines, which are based on standing waves and intrinsically irreversible heat transfer, by more than 50%. At its most efficient operating point, it delivers 710 W of acoustic power to its resonator with a thermal efficiency of 0.30, corresponding to 41% of the Carnot efficiency. At its most powerful operating point, it delivers 890 W to its resonator with a thermal efficiency of 0.22. The efficiency of this engine can be degraded by two types of acoustic streaming. These are suppressed by appropriate tapering of crucial surfaces in the engine and by using additional nonlinearity to induce an opposing time-averaged pressure difference. Data are presented which show the nearly complete elimination of the streaming convective heat loads. Analysis of these and other irreversibilities show which components of the engine require further research to achieve higher efficiency. Additionally, these data show that the dynamics and acoustic power flows are well understood, but the details of the streaming suppression and associated heat convection are only qualitatively understood. PMID:10875360

  3. A thermoacoustic-Stirling heat engine: detailed study

    PubMed

    Backhaus; Swift

    2000-06-01

    A new type of thermoacoustic engine based on traveling waves and ideally reversible heat transfer is described. Measurements and analysis of its performance are presented. This new engine outperforms previous thermoacoustic engines, which are based on standing waves and intrinsically irreversible heat transfer, by more than 50%. At its most efficient operating point, it delivers 710 W of acoustic power to its resonator with a thermal efficiency of 0.30, corresponding to 41% of the Carnot efficiency. At its most powerful operating point, it delivers 890 W to its resonator with a thermal efficiency of 0.22. The efficiency of this engine can be degraded by two types of acoustic streaming. These are suppressed by appropriate tapering of crucial surfaces in the engine and by using additional nonlinearity to induce an opposing time-averaged pressure difference. Data are presented which show the nearly complete elimination of the streaming convective heat loads. Analysis of these and other irreversibilities show which components of the engine require further research to achieve higher efficiency. Additionally, these data show that the dynamics and acoustic power flows are well understood, but the details of the streaming suppression and associated heat convection are only qualitatively understood.

  4. A thermoacoustic-Stirling heat engine: Detailed study

    SciTech Connect

    Backhaus, S.; Swift, G. W.

    2000-06-01

    A new type of thermoacoustic engine based on traveling waves and ideally reversible heat transfer is described. Measurements and analysis of its performance are presented. This new engine outperforms previous thermoacoustic engines, which are based on standing waves and intrinsically irreversible heat transfer, by more than 50%. At its most efficient operating point, it delivers 710 W of acoustic power to its resonator with a thermal efficiency of 0.30, corresponding to 41% of the Carnot efficiency. At its most powerful operating point, it delivers 890 W to its resonator with a thermal efficiency of 0.22. The efficiency of this engine can be degraded by two types of acoustic streaming. These are suppressed by appropriate tapering of crucial surfaces in the engine and by using additional nonlinearity to induce an opposing time-averaged pressure difference. Data are presented which show the nearly complete elimination of the streaming convective heat loads. Analysis of these and other irreversibilities show which components of the engine require further research to achieve higher efficiency. Additionally, these data show that the dynamics and acoustic power flows are well understood, but the details of the streaming suppression and associated heat convection are only qualitatively understood. (c) 2000 Acoustical Society of America.

  5. A comparative contrast-detail study of five medical displays

    SciTech Connect

    Samei, Ehsan; Ranger, Nicole T.; Delong, David M.

    2008-04-15

    The objective of this study was to compare the contrast-detail performance of five different commercial liquid crystal displays (LCDs) to other LCD and cathode-ray tube (CRT) displays for medical applications. A contrast-detail phantom, supplemented with 5 in. of acrylic, was imaged on a commercial digital radiographic system using techniques comparable to chest radiography. The phantom design enabled observer evaluation by a four-alternative forced choice paradigm. The acquired images were independently scored by five observers on five medical display devices: a 5 megapixel monochrome LCD, a 3 megapixel monochrome LCD, a 9 megapixel color LCD, a 5 megapixel monochrome CRT, and a mammographic-grade monochrome CRT. The data were analyzed using the method suggested by the manufacturer based on a nearest neighbor correction technique. They were further analyzed using a logistic regression response model with a natural threshold using an overall chi-square test for display type followed by pairwise comparisons for individual display performance. The differences between the display devices were small. The standard analysis of the results based on the manufacturer-recommended method did not yield any statistically discernible trend among displays. The logistic regression analysis, however, indicated that the 5 megapixel monochrome LCD was statistically significantly (p<0.0001) superior to the others, followed by the 3 megapixel monochrome LCD (p<0.0001). The three other displays exhibited lower but generally similar performance characteristics. The findings suggest that 5 and 3 megapixel monochrome LCDs provide comparable but subtly superior contrast detectability than other tested displays, with the former performing slightly better in the detection of subtle and fine details.

  6. Detailed Study of Ozone Response to Large SEP Events

    NASA Astrophysics Data System (ADS)

    Ao, X.; Verkhoglyadova, O. P.; Wang, S.; Zank, G. P.; Li, G.

    2013-12-01

    Solar Energetic particle (SEP) events, in particular Solar Proton Events (SPEs), have been shown to affect chemical balance of the middle atmosphere (in particular, from 60 to 90 km in altitude). Energetic protons of energies above 1 MeV penetrate into the middle atmosphere and temporarily increase production of chemically active odd hydrogen species (HOx) which in turn causes ozone (O3) destruction. However, many questions remain as to how the detailed HOx-O3 chemical system responds to various types of SEPs, i.e., gradual or impulsive, or to different characteristics of SEP events. The Microwave Limb Sounder (MLS) launched on board Aura satellite in 2004 provides daily simultaneous measurements of HOx, O3 and related parameters such as H2O and temperature on a global scale during both day and night. This is the first time that global measurements of both odd hydrogen species (OH and HO2) are made simultaneously on a daily basis. We will present first results of detailed analysis of several large SEP events in 2004-2006 and corresponding middle atmospheric signatures. We will demonstrate enhancements in nighttime odd hydrogen and ozone densities concomitant with the SEP events. For a detailed study we will use GOES and ACE observations in combination with MLS/Aura measurements to evaluate factors determining nighttime OH and O3 responses to SEP events, such as strength and duration of an SEP event, its spectrum and phenomenology. We will discuss the main contributing factors and characterize odd oxygen and hydroxyl response to large SEP events.

  7. Study of the detail content of Apollo orbital photography

    NASA Technical Reports Server (NTRS)

    Kinzly, R. E.

    1972-01-01

    The results achieved during a study of the Detail Content of Apollo Orbital Photography are reported. The effect of residual motion smear or image reproduction processes upon the detail content of lunar surface imagery obtained from the orbiting command module are assessed. Data and conclusions obtained from the Apollo 8, 12, 14 and 15 missions are included. For the Apollo 8, 12 and 14 missions, the bracket-mounted Hasselblad camera had no mechanism internal to the camera for motion compensation. If the motion of the command module were left totally uncompensated, these photographs would exhibit a ground smear varying from 12 to 27 meters depending upon the focal length of the lens and the exposure time. During the photographic sequences motion compensation was attempted by firing the attitude control system of the spacecraft at a rate to compensate for the motion relative to the lunar surface. The residual smear occurring in selected frames of imagery was assessed using edge analyses methods to obtain and achieved modulation transfer function (MTF) which was compared to a baseline MTF.

  8. A detailed spectroscopic study of an Italian fresco

    SciTech Connect

    Barilaro, Donatella; Crupi, Vincenza; Majolino, Domenico; Barone, Germana; Ponterio, Rosina

    2005-02-15

    In the present work we characterized samples of plasters and pictorial layers taken from a fresco in the Acireale Cathedral. The fresco represents the Coronation of Saint Venera, patron saint of this Ionian town. By performing a detailed spectroscopic analysis of the plaster preparation layer by Fourier-transform infrared (FTIR) spectroscopy and x-ray diffraction (XRD), and of the painting layer by FTIR and confocal Raman microspectroscopy, scanning electron microscopy+energy dispersive x-ray spectroscopy, and XRD, we were able to identify the pigments and the binders present. In particular, Raman investigation was crucial to the characterization of the pigments thanks to the high resolution of the confocal apparatus used. It is worth stressing that the simultaneous use of complementary techniques was able to provide more complete information for the conservation of the artifact we studied.

  9. Applications of thermal remote sensing to detailed ground water studies

    NASA Technical Reports Server (NTRS)

    Souto-Maior, J.

    1973-01-01

    Three possible applications of thermal (8-14 microns) remote sensing to detailed hydrogeologic studies are discussed in this paper: (1) the direct detection of seeps and springs, (2) the indirect evaluation of shallow ground water flow through its thermal effects on the land surface, and (3) the indirect location of small volumes of ground water inflow into surface water bodies. An investigation carried out with this purpose in an area containing a complex shallow ground water flow system indicates that the interpretation of the thermal imageries is complicated by many factors, among which the most important are: (1) altitude, angle of view, and thermal-spatial resolution of the sensor; (2) vegetation type, density, and vigor; (3) topography; (4) climatological and micrometeorological effects; (5) variation in soil type and soil moisture; (6) variation in volume and temperature of ground water inflow; (7) the hydraulic characteristics of the receiving water body, and (8) the presence of decaying organic material.

  10. Study of the detail content of Apollo orbital photography

    NASA Technical Reports Server (NTRS)

    Kinzly, R. E.

    1974-01-01

    The development and application of image evaluation methods for assessing the detail content of Apollo orbital photography was demonstrated. Edge analysis using shadow to sunlight edges interior to craters was successfully used to evaluate the fine detail content of Apollo 15, 16, and 17 imagery. A method for evaluating tone quality was developed using a gain factor as a function of object contrast and average exposure level that can be related to object detectability.

  11. How to Study Intermediate Filaments in Atomic Detail.

    PubMed

    Chernyatina, Anastasia A; Hess, John F; Guzenko, Dmytro; Voss, John C; Strelkov, Sergei V

    2016-01-01

    Studies of the intermediate filament (IF) structure are a prerequisite of understanding their function. In addition, the structural information is indispensable if one wishes to gain a mechanistic view on the disease-related mutations in the IFs. Over the years, considerable progress has been made on the atomic structure of the elementary building block of all IFs, the coiled-coil dimer. Here, we discuss the approaches, methods and practices that have contributed to this advance. With abundant genetic information on hand, bioinformatics approaches give important insights into the dimer structure, including the head and tail regions poorly assessable experimentally. At the same time, the most important contribution has been provided by X-ray crystallography. Following the "divide-and-conquer" approach, many fragments from several IF proteins could be crystallized and resolved to atomic resolution. We will systematically cover the main procedures of these crystallographic studies, suggest ways to maximize their efficiency, and also discuss the possible pitfalls and limitations. In addition, electron paramagnetic resonance with site-directed spin labeling was another method providing a major impact toward the understanding of the IF structure. Upon placing the spin labels into specific positions within the full-length protein, one can evaluate the proximity of the labels and their mobility. This makes it possible to make conclusions about the dimer structure in the coiled-coil region and beyond, as well as to explore the dimer-dimer contacts.

  12. A detailed study of ice nucleation by feldspar minerals

    NASA Astrophysics Data System (ADS)

    Whale, T. F.; Murray, B. J.; Wilson, T. W.; Carpenter, M. A.; Harrison, A.; Holden, M. A.; Vergara Temprado, J.; Morris, J.; O'Sullivan, D.

    2015-12-01

    Immersion mode heterogeneous ice nucleation plays a crucial role in controlling the composition of mixed phase clouds, which contain both supercooled liquid water and ice particles. The amount of ice in mixed phase clouds can affect cloud particle size, lifetime and extent and so affects radiative properties and precipitation. Feldspar minerals are probably the most important minerals for ice nucleation in mixed phase clouds because they nucleate ice more efficiently than other components of atmospheric mineral dust (Atkinson et al. 2013). The feldspar class of minerals is complex, containing numerous chemical compositions, several crystal polymorphs and wide variations in microscopic structure. Here we present the results of a study into ice nucleation by a wide range of different feldspars. We found that, in general, alkali feldspars nucleate ice more efficiently than plagioclase feldspars. However, we also found that particular alkali feldspars nucleate ice relatively inefficiently, suggesting that chemical composition is not the only important factor that dictates the ice nucleation efficiency of feldspar minerals. Ice nucleation by feldspar is described well by the singular model and is probably site specific in nature. The alkali feldspars that do not nucleate ice efficiently possess relatively homogenous structure on the micrometre scale suggesting that the important sites for nucleation are related to surface topography. Ice nucleation active site densities for the majority of tested alkali feldspars are similar to those found by Atkinson et al (2013), meaning that the validity of global aerosol modelling conducted in that study is not affected. Additionally, we have found that ice nucleation by feldspars is strongly influenced, both positively and negatively, by the solute content of droplets. Most other nucleants we have tested are unaffected by solutes. This provides insight into the mechanism of ice nucleation by feldspars and could be of importance

  13. A Detailed Study of Patent System for Protection of Inventions

    PubMed Central

    Tulasi, G. Krishna; Rao, B. Subba

    2008-01-01

    Creations of brain are called intellect. Since these creations have good commercial value, are called as property. Inventions are intellectual property and can be protected by patents provided the invention is novel, non-obvious, useful and enabled. To have fare trade among member countries, World Trade Organisation proposed TRIPS agreement. India had taken necessary initiation by signing the World Trade Organisation agreement and transformed to global needs. The aim of this article is to enlighten pharmaceutical professionals especially in the field of research and development about planning inventions by thorough review of prior-art, which saves time and money. A thorough understanding is made possible by providing details of origin; present governing bodies, their role along with the Act that is safeguarding the patent system. PMID:21394248

  14. Orbital transfer vehicle launch operations study. Volume 2: Detailed summary

    NASA Technical Reports Server (NTRS)

    1986-01-01

    A series of Operational Design Drivers were identified. Several of these could have significant impact(s) on program costs. These recommendations, for example, include such items as: complete factory assembly and checkout prior to shipment to the ground launch site to make significant reductions in time required at the launch site as well as overall manpower required to do this work; minimize use of nonstandard equipment when orbiter provided equipment is available; and require commonality (or interchangeability) of subsystem equipment elements that are common to the space station, Orbit Maneuvering Vehicles, and/or Orbit Transfer Vehicles. Several additional items were identified that will require a significant amount of management attention (and direction) to resolve. Key elements of the space based processing plans are discussed.

  15. A detailed study on Catchment delineation for Urban areas

    NASA Astrophysics Data System (ADS)

    Sharma, B.; B M, A.; Lohani, B.; Jain, A.

    2015-12-01

    Urban flood modelling is carried out for predicting, analysing and planning of floods in urban areas. Catchment information is an important input for urban flood modelling. Automatic catchment delineation at gully gratings for urban areas using appropriate software packages/methods along with an appropriate set of input data and parameters is still a research challenge. Considering the above, the aim of this study is to (i) identify the best suitable software for automatic catchment delineation by considering gully grating as outlet (ii) understand the effect of resolution of DEM on catchments delineated (iii) understand whether to consider DEM or DSM for catchment delineation (iv) study the effect of grid based and TIN based DEM. In this study catchment delineation has been investigated considering IIT Kanpur as a study site. LiDAR data are used to generate DEM/DSM of the study area. A comparative study of catchment delineation has been carried out between ArcHydro 10.1, BASINS 4.1, ArcSWAT, WMS 7.1, and HEC-GeoHMS approaches. Catchments have been delineated for different drainage threshold areas using gully grating points as outlets and their effects have been compared for the aforementioned software. In order to understand the effect of resolution of data, DEMs of 1m and 5m resolution have been generated and compared against each other. Effects of building ridge lines and their contribution to catchment delineation has been studied by generating a DSM of 1m resolution, and comparing the results with catchments delineated using 1m DEM. In order to assess the effects of the types of DEM over catchment delineation, a grid based DEM and TIN based DEM are compared against each other using WMS 7.1 software. The results for the catchment delineation using various software illustrate that ArcHydro 10.1 performs better than any other aforementioned software. Also, it is noted that varied drainage threshold area parameters, resolutions of DEM, selection of DEM

  16. Flavonoid-surfactant interactions: A detailed physicochemical study.

    PubMed

    Singh, Onkar; Kaur, Rajwinder; Mahajan, Rakesh Kumar

    2017-01-01

    The aim of this article is to study the interactions between flavonoids and surfactants with attention of finding the probable location of flavonoids in micellar media that can be used for controlling their antioxidant behavior. In present study, the micellar and interfacial behavior of twin tailed anionic surfactants viz. sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and sodium bis(2-ethylhexyl)phosphate (NaDEHP) in the presence of two flavonoids, namely quercetin (QUE) and kaempferol (KFL) have been studied by surface tension measurements. UV-visible, fluorescence and differential pulse voltammetric (DPV) measurements have been employed to predict the probable location of flavonoids (QUE/KFL) within surfactant (AOT/NaDEHP) aggregates. Dynamic light scattering (DLS) measurements further confirmed the solubilization of QUE/KFL in AOT/NaDEHP aggregates deduced from increased hydrodynamic diameter (Dh) of aggregates in the presence of flavonoids. Both radical scavenging activity (RSA) and degradation rate constant (k) of flavonoids are found to be higher in NaDEHP micelles as compared to AOT micelles. PMID:27419641

  17. A detailed study of magnetization reversal in individual Ni nanowires

    SciTech Connect

    Vilanova Vidal, Enrique; Ivanov, Yurii P.; Mohammed, Hanan; Kosel, Jürgen

    2015-01-19

    Magnetic nanowires have emerged as essential components for a broad range of applications. In many cases, a key property of these components is the switching field, which is studied as a function of the angle between the field and the nanowire. We found remarkable differences of up to 100% between the switching fields of different nanowires from the same fabrication batch. Our experimental results and micromagnetic simulations indicate that the nanowires exhibit a single domain behavior and that the switching mechanism includes vortex domain wall motion across the nanowire. The differences between the switching fields are attributed to different cross-sections of the nanowires, as found by electron microscopy. While a circular cross-section yields the smallest switching field values, any deviation from this shape results in an increase of the switching field. The shape of the nanowires' cross-sections is thus a critical parameter that has not been previously taken into account.

  18. Detailed study of the superconducting properties in compressed germane

    NASA Astrophysics Data System (ADS)

    Szczȩśniak, Radosław; Durajski, Artur P.

    2015-12-01

    Hydrogen-rich compounds under extreme pressure are the most promising systems for searching a high-temperature superconductivity. In presented paper, we report analysis of the thermodynamic properties of hydrogenated germanium (germane, GeH4) at 220 GPa obtained within the framework of the Migdal-Eliashberg theory. We observe that together with the increase of Coulomb pseudopotential from 0.1 to 0.3 the critical temperature decreases from 92.36 K to 52.80 K. A similar trend is also well-visible in the case of other thermodynamic properties. Moreover, we study the influence of external pressure on the superconducting state of GeH4. On this basis we conclude that increase of pressure from 20 to 220 GPa has a pronounced effect on the thermodynamic stability of germane. Finally, it is proved that the properties of the superconducting state of GeH4 differ markedly from predictions of the Bardeen-Cooper-Schrieffer (BCS) theory.

  19. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  20. Introducing DeBRa: a detailed breast model for radiological studies

    NASA Astrophysics Data System (ADS)

    Ma, Andy K. W.; Gunn, Spencer; Darambara, Dimitra G.

    2009-07-01

    Currently, x-ray mammography is the method of choice in breast cancer screening programmes. As the mammography technology moves from 2D imaging modalities to 3D, conventional computational phantoms do not have sufficient detail to support the studies of these advanced imaging systems. Studies of these 3D imaging systems call for a realistic and sophisticated computational model of the breast. DeBRa (Detailed Breast model for Radiological studies) is the most advanced, detailed, 3D computational model of the breast developed recently for breast imaging studies. A DeBRa phantom can be constructed to model a compressed breast, as in film/screen, digital mammography and digital breast tomosynthesis studies, or a non-compressed breast as in positron emission mammography and breast CT studies. Both the cranial-caudal and mediolateral oblique views can be modelled. The anatomical details inside the phantom include the lactiferous duct system, the Cooper ligaments and the pectoral muscle. The fibroglandular tissues are also modelled realistically. In addition, abnormalities such as microcalcifications, irregular tumours and spiculated tumours are inserted into the phantom. Existing sophisticated breast models require specialized simulation codes. Unlike its predecessors, DeBRa has elemental compositions and densities incorporated into its voxels including those of the explicitly modelled anatomical structures and the noise-like fibroglandular tissues. The voxel dimensions are specified as needed by any study and the microcalcifications are embedded into the voxels so that the microcalcification sizes are not limited by the voxel dimensions. Therefore, DeBRa works with general-purpose Monte Carlo codes. Furthermore, general-purpose Monte Carlo codes allow different types of imaging modalities and detector characteristics to be simulated with ease. DeBRa is a versatile and multipurpose model specifically designed for both x-ray and γ-ray imaging studies.

  1. Additional EIPC Study Analysis. Final Report

    SciTech Connect

    Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  2. Palladium(0)/NHC-Catalyzed Reductive Heck Reaction of Enones: A Detailed Mechanistic Study.

    PubMed

    Raoufmoghaddam, Saeed; Mannathan, Subramaniyan; Minnaard, Adriaan J; de Vries, Johannes G; Reek, Joost N H

    2015-12-14

    We have studied the mechanism of the palladium-catalyzed reductive Heck reaction of para-substituted enones with 4-iodoanisole by using N,N-diisopropylethylamine (DIPEA) as the reductant. Kinetic studies and in situ spectroscopic analysis have provided a detailed insight into the reaction. Progress kinetic analysis demonstrated that neither catalyst decomposition nor product inhibition occurred during the catalysis. The reaction is first order in the palladium and aryl iodide, and zero order in the activated alkene, N-heterocyclic carbene (NHC) ligand, and DIPEA. The experiments with deuterated solvent ([D7]DMF) and deuterated base ([D15]Et3N) supported the role of the amine as a reductant in the reaction. The palladium complex [Pd(0)(NHC)(1)] has been identified as the resting state. The kinetic experiments by stopped-flow UV/Vis also revealed that the presence of the second substrate, benzylideneacetone 1, slows down the oxidative addition of 4-iodoanisole through its competing coordination to the palladium center. The kinetic and mechanistic studies indicated that the oxidative addition of the aryl iodide is the rate-determining step. Various scenarios for the oxidative addition step have been analyzed by using DFT calculations (bp86/def2-TZVP) that supported the inhibiting effect of substrate 1 by formation of resting state [Pd(0)(NHC)(1)] species at the cost of further increase in the energy barrier of the oxidative addition step. PMID:26561034

  3. Soybean peroxidase-mediated degradation of an azo dye– a detailed mechanistic study

    PubMed Central

    2013-01-01

    Background Peroxidases are emerging as an important class of enzymes that can be used for the efficient degradation of organic pollutants. However, detailed studies identifying the various intermediates produced and the mechanisms involved in the enzyme-mediated pollutant degradation are not widely published. Results In the present study, the enzymatic degradation of an azo dye (Crystal Ponceau 6R, CP6R) was studied using commercially available soybean peroxidase (SBP) enzyme. Several operational parameters affecting the enzymatic degradation of dye were evaluated and optimized, such as initial dye concentration, H2O2 dosage, mediator amount and pH of the solution. Under optimized conditions, 40 ppm dye solution could be completely degraded in under one minute by SBP in the presence of H2O2 and a redox mediator. Dye degradation was also confirmed using HPLC and TOC analyses, which showed that most of the dye was being mineralized to CO2 in the process. Conclusions Detailed analysis of metabolites, based on LC/MS results, showed that the enzyme-based degradation of the CP6R dye proceeded in two different reaction pathways- via symmetric azo bond cleavage as well as asymmetric azo bond breakage in the dye molecule. In addition, various critical transformative and oxidative steps such as deamination, desulfonation, keto-oxidation are explained on an electronic level. Furthermore, LC/MS/MS analyses confirmed that the end products in both pathways were small chain aliphatic carboxylic acids. PMID:24308857

  4. A Detailed Study of Two Optically-Selected, High-Redshift Clusters of Galaxies

    NASA Technical Reports Server (NTRS)

    Lubin, Lori M.

    2002-01-01

    We are obtaining detailed X-ray spectral and structural data for two distant, optically-selected clusters of galaxies which are known X-ray emitters, CL1324+3011 at z=0.76 and CL1604+4304 at z=0.90. These observations will allow us to place accurate constraints on the temperature, surface-brightness profile, and mass fraction of the intracluster medium in rich, optically-selected clusters at very high redshift. The two target clusters are the most well-studied systems at z greater than 0.7 in the optical and infrared regimes; therefore, with the addition of the XMM data, we plan to study the specifics of the relationship between the X-ray and optical properties and their implications for galaxy and cluster evolution.

  5. A Detailed Study of Two Optically Selected, High-Redshift Clusters of Galaxies

    NASA Technical Reports Server (NTRS)

    Lubin, Lori M.

    2000-01-01

    We are obtaining detailed X-ray spectral and structural data for two distant, optically-selected clusters of galaxies which are known X-ray emitters, CL1324+3011 at z = 0.76 and CL,1604+4304 at z = 0.90. These observations will allow us to place accurate constraints on the temperature, surface-brightness profile, and mass fraction of the intracluster medium in rich, optically-selected clusters at very high redshift. The two target clusters are the most well-studied systems at z greater than 0.7 in the optical and infrared regimes; therefore, with the addition of the XMM data, we plan to study the specifies of the relationship between the X-ray and optical properties and their implications for galaxy and cluster evolution.

  6. Detailed Study of Emergency Diesel Generator Performance Using EPIX/RADS Database

    SciTech Connect

    Steven Eide; Thomas Wierman; Dale Rasmuson

    2008-09-01

    A recent report was published by the U.S. Nuclear Regulatory Commission – Industry-Average Performance for Components and Initiating Events at U.S. Commercial Nuclear Power Plants, NUREG/CR-6928. That report characterized industry performance (generally covering 1998 – 2002) for 51 component types found in commercial nuclear power plants. For example, for emergency diesel generators, three failure modes were identified: fail to start and reach rated speed and voltage, fail to load and run for one hour, and fail to run beyond one hour. Data from the U.S. industry contained in the Equipment Performance and Information Exchange (EPIX) database maintained by The Institute for Nuclear Power Operations were used to evaluate the failure probabilities and rates for these failure modes, covering 1998 – 2002. The software package Reliability and Availability Database System (RADS) was used to search and process the EPIX data. In addition, train test and maintenance unavailability was characterized for 34 train types. As a follow-on effort to this report, several components will be analyzed in more detail each year. These detailed studies include more recent data and analyze various subcategories such as manufacturer, system, size and type (as applicable). In addition, engineering insights such as piece part contribution to each failure mode and failure cause will be determined. This paper summarizes the preliminary results for emergency diesel generators. EPIX data coverage was expanded to include 1998 – 2007 and reliability results were compared with unplanned demand performance (bus under voltage events requiring the emergency diesel generator to start, load and run) over the same period. In addition, performance by manufacturer was evaluated. Finally, piece part contributions and failure causes were determined for each failure mode.

  7. Structure Property Studies for Additively Manufactured Parts

    SciTech Connect

    Milenski, Helen M; Schmalzer, Andrew Michael; Kelly, Daniel

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  8. A detailed lithologic study of glacially buried valley in central Champaign County, Ohio

    SciTech Connect

    Schilling, D.J.; Dominic, D.F. . Dept. of Geological Sciences)

    1994-04-01

    Previous subsurface mapping in this area has identified a bedrock valley (Teays), which trends southeast to northwest and has a maximum depth of 135 m and width of 7 km. The valley is largely filled with outwash and is flanked on the east by moraines. This study focuses on the details of the sedimentary fill in the valley; it was spurred by proposed highway construction and its possible effects on a nearby fen. In addition to the surficial geology map of the county, lithologic interpretations were based on logs of water wells, and lithologic logs of 43 wells drilled by Wright State University to evaluate the stratigraphy of the valley, together with 26 gamma logs of these holes. The well logs were interpreted in terms of seven standardized lithologies and then correlated as depositional units on cross sections.

  9. Detailed kinetic modeling study of n-pentanol oxidation

    SciTech Connect

    Heufer, K. Alexander; Sarathy, S. Mani; Curran, Henry J.; Davis, Alexander C.; Westbrook, Charles K.; Pitz, William J.

    2012-09-28

    To help overcome the world’s dependence upon fossil fuels, suitable biofuels are promising alternatives that can be used in the transportation sector. Recent research on internal combustion engines shows that short alcoholic fuels (e.g., ethanol or n-butanol) have reduced pollutant emissions and increased knock resistance compared to fossil fuels. Although higher molecular weight alcohols (e.g., n-pentanol and n-hexanol) exhibit higher reactivity that lowers their knock resistance, they are suitable for diesel engines or advanced engine concepts, such as homogeneous charge compression ignition (HCCI), where higher reactivity at lower temperatures is necessary for engine operation. The present study presents a detailed kinetic model for n-pentanol based on modeling rules previously presented for n-butanol. This approach was initially validated using quantum chemistry calculations to verify the most stable n-pentanol conformation and to obtain C–H and C–C bond dissociation energies. In addition, the proposed model has been validated against ignition delay time data, speciation data from a jet-stirred reactor, and laminar flame velocity measurements. Overall, the model shows good agreement with the experiments and permits a detailed discussion of the differences between alcohols and alkanes.

  10. Evaluation of streams in selected communities for the application of limited-detail study methods for flood-insurance studies

    USGS Publications Warehouse

    Cobb, Ernest D.

    1986-01-01

    The U.S. Geological Survey evaluated 2,349 communities in 1984 for the application of limited-detail flood-insurance study methods, that is, methods with a reduced effort and cost compared to the detailed studies. Limited-detail study methods were found to be appropriate for 1,705 communities, while detailed studies were appropriate for 62 communities and no studies were appropriate for 582 communities. The total length of streams for which limited-detail studies are recommended is 9 ,327 miles with a corresponding cost of $23,007,000. This results in average estimated costs for conducting limited-detail studies of $2,500 per mile of studied stream length. The purpose of the report is to document the limited-detail study methods and the results of the evaluation. (USGS)

  11. Vadose zone transport field study: Detailed test plan for simulated leak tests

    SciTech Connect

    AL Ward; GW Gee

    2000-06-23

    : identify mechanisms controlling transport processes in soils typical of the hydrogeologic conditions of Hanford's waste disposal sites; reduce uncertainty in conceptual models; develop a detailed and accurate database of hydraulic and transport parameters for validation of three-dimensional numerical models; identify and evaluate advanced, cost-effective characterization methods with the potential to assess changing conditions in the vadose zone, particularly as surrogates of currently undetectable high-risk contaminants. This plan provides details for conducting field tests during FY 2000 to accomplish these objectives. Details of additional testing during FY 2001 and FY 2002 will be developed as part of the work planning process implemented by the Integration Project.

  12. Detailed Knowledge of the Tuskegee Syphilis Study: Who Knows What? A Framework for Health Promotion Strategies

    ERIC Educational Resources Information Center

    Green, B. Lee; Li, Lin; Morris, J. Fontain; Gluzman, Rima; Davis, Jenna L.; Wang, Min Qi; Katz, Ralph V.

    2011-01-01

    This report explores the level of detailed knowledge about the Tuskegee Syphilis Study (TSS) among 848 Blacks and Whites in three U.S. cities across an array of demographic variables. The Tuskegee Legacy Project (TLP) Questionnaire was used, which was designed to explore the willingness of minorities to participate in biomedical studies. A…

  13. Detailed study of the dielectric function of a lysozyme solution studied with molecular dynamics simulations.

    PubMed

    Floros, Stelios; Liakopoulou-Kyriakides, Maria; Karatasos, Kostas; Papadopoulos, Georgios E

    2015-12-01

    The spread of microwave technology and new microwave applications in medicine have revitalized interest in the dielectric behavior of biological systems. In this work, the Fröhlich-Kirkwood approach and the linear response theory have been applied in conjunction with molecular dynamics simulations to study the dielectric response of a lysozyme solution as a model. The overall experimental dielectric behavior of a 9.88 mM lysozyme solution has been reproduced in a quantitative manner by employing a method based on the decomposition of the hydration shells close to the solute. Detailed analysis of the calculated spectra identified two δ-processes located at 200 MHz (δ1) and about 1 GHz (δ2), respectively. δ1 is associated mainly with the first hydration shell, while δ2 mainly with bulk water and the second hydration shell. Moreover, indications for the existence of an even faster relaxation in the 10(11)-Hz frequency range were found for the first time. Finally, the static dielectric constants of lysozyme and its first and second hydration shells were calculated based on the Fröhlich-Kirkwood and the linear response theory approaches.

  14. Evidence, Interpretation, and Qualification from Multiple Reports of Long-Term Outcomes in the Multimodal Treatment Study of Children with ADHD (MTA): Part II--Supporting Details

    ERIC Educational Resources Information Center

    Swanson, James; Arnold, L. Eugene; Kraemer, Helena; Hechtman, Lily; Molina, Brooke; Hinshaw, Stephen; Vitiello, Benedetto; Jensen, Peter; Steinhoff, Ken; Lerner, Marc; Greenhill, Laurence; Abikoff, Howard; Wells, Karen; Epstein, Jeffery; Elliott, Glen; Newcorn, Jeffrey; Hoza, Betsy; Wigal, Timothy

    2008-01-01

    Objective: To review and provide details about the primary and secondary findings from the Multimodal Treatment study of ADHD (MTA) published during the past decade as three sets of articles. Method: In the second of a two part article, we provide additional background and detail required by the complexity of the MTA to address confusion and…

  15. 411. Delineator Unknown November 2, 1933 1/8" SCALE DETAIL STUDY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    411. Delineator Unknown November 2, 1933 1/8" SCALE DETAIL STUDY OF S.F. ANCHORAGE; SAN FRANCISCO OAKLAND BAY BRIDGE; TIMOTHY L. PFLUEGER, ARTHUR BROWN JR., JOHN J. DONOVAN; BOARD OF CONSULTING ARCHITECTS; SHEET NO. R31 - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA

  16. A Study of Additional Costs of Second Language Instruction.

    ERIC Educational Resources Information Center

    McEwen, Nelly

    A study was conducted whose primary aim was to identify and explain additional costs incurred by Alberta, Canada school jurisdictions providing second language instruction in 1980. Additional costs were defined as those which would not have been incurred had the second language program not been in existence. Three types of additional costs were…

  17. A detailed study of the Pernik (Bulgaria) seismic sequence of 2012

    NASA Astrophysics Data System (ADS)

    Raykova, Plamena; Solakov, Dimcho; Simeonova, Stela; Dimitrova, Liliya

    2014-05-01

    A detailed study of the Pernik (Bulgaria) seismic sequence of 2012 D.Solakov, S.Simeonova ,I. Georgiev, P.Raykova, L.Dimitrova and V.Protopopova National Institute of Geophysics, Geodesy and Geography-BAS, Sofia, Bulgaria The spatial and temporal clustering of aftershocks is the dominant non-random element of seismicity, so that when aftershocks are removed, the remaining activity can be modelled (as first approximation) as a Poisson process. The properties of aftershock sequences (distinct cluster, for example; even aftershocks can have aftershocks) allow time-dependent prediction of aftershock probabilities. Consideration of recent earthquake sequences suggests that aftershocks to large earthquakes although they are still, by definition, smaller events, can be very damaging and should be addressed in emergence planning scenarios. Because of the factors such as location and radiation pattern and the cumulative nature of building damage, aftershocks can cause more damage than the main shock. An earthquake of moment magnitude 5.6 hit Sofia seismic zone, on May 22nd, 2012. The earthquake occurred in the vicinity of Pernik city, at about 25 km south west of the city of Sofia (the capital of Bulgaria). The event was followed by intensive activity. The active area is situated in the central part of western Bulgaria. That is the most populated (more than 1.2 mil. inhabitants), industrial and cultural region of Bulgaria. Seismicity in the zone is related to the marginal neotectonic faults of Sofia graben. The boundaries of the graben are represented by SE-NW fault system with expressive neotectonic activity. This zone is characterized by shallow earthquakes. The strongest known event in the region is the 1858 quake with intensity I0=9-10 MSK. The 1858 earthquake caused heavy destruction in the city of Sofia and the appearance of thermal spring. It is worth mentioning that the seismic sequence of May 2912 occurred in an area characterized by a long quiescence (of 95 years

  18. Combustion of n-heptane in a shock tube and in a stirred reactor: A detailed kinetic modeling study

    SciTech Connect

    Gaffuri, P.; Curran, H.J.; Pitz, W.J.; Westbrook, C.K.

    1995-04-13

    A detailed chemical kinetic reaction mechanism is used to study the oxidation of n-heptane under several classes of conditions. Experimental results from ignition behind reflected shock waves and in a rapid compression machine were used to develop and validate the reaction mechanism at relatively high temperatures, while data from a continuously stirred tank reactor (cstr) were used to refine the low temperature portions of the reaction mechanism. In addition to the detailed kinetic modeling, a global or lumped kinetic mechanism was used to study the same experimental results. The lumped model was able to identify key reactions and reaction paths that were most sensitive in each experimental regime and provide important guidance for the detailed modeling effort. In each set of experiments, a region of negative temperature coefficient (NTC) was observed. Variation in pressure from 5 to 40 bars were found to change the temperature range over which the NTC region occurred. Both the lumped and detailed kinetic models reproduced the measured results in each type of experiments, including the features of the NTC region, and the specific elementary reactions and reaction paths responsible for this behavior were identified and rate expressions for these reactions were determined.

  19. Detailed hydrochemical studies as a useful extension of national ground-water monitoring networks

    SciTech Connect

    Frapporti, G.; Hoogendoorn, J.H.; Vriend, S.P.

    1995-09-01

    Regional and national ground-water monitoring networks are used to inventory and to monitor diffusive (nonpoint) sources of ground-water contamination. The Dutch National Ground Water Quality Monitoring Network (LMG) is an example of such a network and monitors the shallow ground water of The Netherlands at two depths (10 and 25 m below land surface) in 350 wells, giving an average density of one monitoring well per 100 km{sup 2}. Once water-quality changes have been observed in time and space, the regional network is less suited to the study of the detailed chemistry, dynamics, and scale of the observed changes, because of the low density of sampling points. Two important threats to the quality of ground water that were identified by the regional network were studied in greater detail by use of multilevel observation wells along cross sections parallel to the direction of ground-water flow. The first detailed study evaluates the fate of nitrate and other agricultural contaminants in a sandy aquifer recharged by precipitation. the second detailed study evaluates the effects of recharge from IJsssel river water in a sandy aquifer. The varying compositions of ground water are controlled by the hydrological flow patterns, the composition of the aquifer sediments and the composition of the source water. These controlling factors locally lead to relatively rapid transitions and heterogeneity of ground-water compositions. The transition zones are considerably smaller than the density of observation wells in the Dutch ground-water monitoring network, which limits the usefulness of regional monitoring networks for identifying chemically similar hydrologic zones or for effectively evaluating physical and chemical processes that affect the water quality. Regional patterns may evolve as a result of selective placement of monitoring wells, which show a specific fact of the ground-water quality of that region.

  20. Study on detailed geological modelling for fluvial sandstone reservoir in Daqing oil field

    SciTech Connect

    Zhao Hanqing; Fu Zhiguo; Lu Xiaoguang

    1997-08-01

    Guided by the sedimentation theory and knowledge of modern and ancient fluvial deposition and utilizing the abundant information of sedimentary series, microfacies type and petrophysical parameters from well logging curves of close spaced thousands of wells located in a large area. A new method for establishing detailed sedimentation and permeability distribution models for fluvial reservoirs have been developed successfully. This study aimed at the geometry and internal architecture of sandbodies, in accordance to their hierarchical levels of heterogeneity and building up sedimentation and permeability distribution models of fluvial reservoirs, describing the reservoir heterogeneity on the light of the river sedimentary rules. The results and methods obtained in outcrop and modem sedimentation studies have successfully supported the study. Taking advantage of this method, the major producing layers (PI{sub 1-2}), which have been considered as heterogeneous and thick fluvial reservoirs extending widely in lateral are researched in detail. These layers are subdivided into single sedimentary units vertically and the microfacies are identified horizontally. Furthermore, a complex system is recognized according to their hierarchical levels from large to small, meander belt, single channel sandbody, meander scroll, point bar, and lateral accretion bodies of point bar. The achieved results improved the description of areal distribution of point bar sandbodies, provide an accurate and detailed framework model for establishing high resolution predicting model. By using geostatistic technique, it also plays an important role in searching for enriched zone of residual oil distribution.

  1. Propene oxidation at low and intermediate temperatures: A detailed chemical kinetic study

    SciTech Connect

    Wilk, R.D.; Cernansky, N.P.; Pitz, W.J.; Westbrook, C.K.

    1987-03-24

    A detailed chemical kinetic mechanism for propene oxidation is developed and used to model reactions in a static reactor at temperatures of 575-715 K, equivalence ratios of 0.8 - 2.0, and a pressure of 600 torr. Modeling of hydrocarbon oxidation in this temperature range is important for the validation of detailed models to be used for performing calculations related to automotive engine knock. The model predicted induction periods and species concentrations for all the species and all conditions measured experimentally in the static reactor. Overall, the calculated concentrations of carbon monoxide, acetaldehyde, acrolein, and propane oxide agreed well with those measured. The calculated concentrations of ethane are low compared to the experimental measurements, and the calculated concentrations of formaldehyde are high. Agreement for concentrations of carbon dioxide, methane, and methanol is mixed. The characteristic s-shape of the fuel concentration history is well predicted. Modeling calculations identified some of the key reaction steps at the present conditions. Addition of OH to propene and H atom abstraction by OH from propene are important steps in determining the subsequent distributions of intermediate products, such as acetaldehyde, acrolein and formaldehyde. Allyl radicals are very abundant in propene oxidation, and the primary steps found to be responsible for their consumption are reaction with CH/sub 3/O/sub 2/ and HO/sub 2/. 37 refs., 5 figs., 1 tab.

  2. Propene oxidation at low and intermediate temperatures: A detailed chemical kinetic study

    SciTech Connect

    Wilk, R.D.; Gernansky, N.P.; Pitz, W.J.; Westbrook, C.K.

    1987-01-01

    A detailed chemical kinetic mechanism for propene oxidation is developed and used to model reactions in a static reactor at temperatures of 575-715 K, equivalence ratios of 0.8 - 2.0, and a pressure of 600 torr. Modeling of hydrocarbon oxidation in this temperature range is important for the validation of detailed models to be used for performing calculations related to automotive engine knock. The model predicted induction periods and species concentrations for all the species and all conditions measured experimentally in the static reactor. Overall, the calculated concentrations of carbon monoxide, acetaldehyde, acrolein, and propene oxide agreed well with those measured. The calculated concentrations of ethene are low compared to the experimental measurements, and the calculated concentrations of formaldehyde are high. Agreement for concentrations of carbon dioxide, methane, and methanol is mixed. The characteristic s-shape of the fuel concentration history is well predicted. Modeling calculations identified some of the key reaction steps at the present conditions. Addition of OH to propene and H atom abstraction by OH from propene are important steps in determining the subsequent distributions of intermediate products, such as acetaldehyde, acrolein and formaldehyde. Allyl radicals are very abundant in propene oxidation, and the primary steps found to be responsible for their consumption are reaction with CH/sub 3/O/sub 2/ and HO/sub 2/.

  3. Study on thermal effects & sulfurized additives, in lubricating greases

    NASA Astrophysics Data System (ADS)

    Shah, Ami Atul

    Lithium Base grease constitutes about 50% of market. The greases are developed to be able to work in multiple working conditions and have longer working life. Greases with extreme pressure additives and anti-wear additives have been developed as a solution to many of the applications. These developed greases are tested under ASTM D2266 testing conditions to meet the requirements. The actual working conditions, although, differ than the real testing conditions. The loading, speed and temperature conditions can be more harsh, or fluctuating in nature. The cyclic nature of the parameters cannot be directly related to the test performance. For this purpose studies on the performance under spectrum loading, variable speed and fluctuating temperature must be performed. This study includes tests to understand the effect of thermal variation on some of the most commonly used grease additives that perform well under ASTM D2266 testing conditions. The studied additives include most widely used industrial extreme pressure additive MoS2. Performance of ZDDP which is trying to replace MoS2 in its industrial applications has also been studied. The tests cover study of extreme pressure, anti-wear and friction modifier additives to get a general idea on the effects of thermal variation in three areas. Sulphur is the most common extreme pressure additive. Sulphur based MoS 2 is extensively used grease additive. Study to understand the tribological performance of this additive through wear testing and SEM/EDX studies has been done. This performance is also studied for other metallic sulfides like WS2 and sulphur based organic compound. The aim is to study the importance of the type of bond that sulphur shares in its additive's structure on its performance. The MoS2 film formation is found to be on the basis of the FeS formation on the substrate and protection through sacrificial monolayer deposition of the MoS2 sheared structure. The free Mo then tends to oxidise. An attempt to

  4. Detailed analysis of a quench bomb for the study of aluminum agglomeration in solid propellants

    NASA Astrophysics Data System (ADS)

    Gallier, S.; Kratz, J.-G.; Quaglia, N.; Fouin, G.

    2016-07-01

    A standard quench bomb (QB) - widely used to characterize condensed phase from metalized solid propellant combustion - is studied in detail. Experimental and numerical investigations proved that collected particles are mostly unburned aluminum (Al) agglomerates despite large quenching distances. Particles are actually found to quench early as propellant surface is swept by inert pressurant. Further improvements of the QB are proposed which allow measuring both Al agglomerates and alumina residue with the same setup. Finally, the results obtained on a typical aluminized ammonium perchlorate (AP) / hydroxyl-terminated polybutadiene (HTPB) propellant are briefly discussed.

  5. Detailed study of macrobending effects in a wide transmission bandwidth hollow-core photonic bandgap fiber

    NASA Astrophysics Data System (ADS)

    Chen, Y.; Sandoghchi, S. R.; Numkam, E.; Bradley, T. D.; Hayes, J. R.; Wheeler, N. V.; Jasion, G.; Gray, D. R.; Poletti, F.; Petrovich, M. N.; Richardson, D. J.

    2016-04-01

    We study in detail the macrobending effects in a wide transmission bandwidth (~200nm) 19 cell hollow-core photonic bandgap fiber operating at 1550nm. Our results indicate low bend sensitivity over a ~130nm wide interval within the transmission window, with negligible loss (<0.1dB) for bending radii down to 5mm. The "red shift" and "blue shift" of the bandgap edge have been observed at the short and long wavelength edges, respectively. The cutoff wavelengths where air-guiding modes stop guiding can be extracted from the bending loss spectra, which matches well with the simulated effective refractive index map of such fiber.

  6. Does Learners' Prior Knowledge Moderate the Detrimental Effects of Seductive Details in Reading from Text? A 2 by 3 Study

    ERIC Educational Resources Information Center

    Wang, Zhe; Adesope, Olusola

    2016-01-01

    Previous work on seductive details has demonstrated that interesting but irrelevant messages hinder students' text learning. Considering that there is little evidence suggesting the relationship between seductive details and prior knowledge, the present study examined how seductive details affect learning in terms of prior knowledge to address the…

  7. A spectroscopic study of southern (candidate) γ Doradus stars. II. Detailed abundance analysis and fundamental parameters

    NASA Astrophysics Data System (ADS)

    Bruntt, H.; De Cat, P.; Aerts, C.

    2008-02-01

    Context: The γ Doradus stars are a recent class of variable main sequence F-type stars located on the red edge of the Cepheid instability strip. They pulsate in gravity modes, and this makes them particularly interesting for detailed asteroseismic analysis, which can provide fundamental knowledge of properties near the convective cores of intermediate-mass main sequence stars. Aims: To improve current understanding of γ Dor stars through theoretical modelling, additional constraints are needed. Our aim is to estimate the fundamental atmospheric parameters and determine the chemical composition of these stars. Detailed analyses of single stars have previously suggested links to Am and λ Boo stars, so we wish to explore this interesting connection between chemical peculiarity and pulsation. Methods: We analysed a sample of γ Dor stars for the first time, including nine bona fide and three candidate members of the class. We determined the fundamental atmospheric parameters and compared the abundance pattern with other A-type stars. We used the semi-automatic software package VWA for the analysis. This code relies on the calculation of synthetic spectra and thus takes line-blending into account. This is important because of the fast rotation in some of the sample stars, and we made a thorough analysis of how VWA performs when increasing v sin i. We obtained good results in agreement with previously derived fundamental parameters and abundances in a few selected reference stars with properties similar to the γ Dor stars. Results: We find that the abundance pattern in the γ Dor stars is not distinct from the constant A- and F-type stars we analysed. Appendices A and B are only available in electronic form at http://www.aanda.org

  8. Co-Simulation of Detailed Whole Building with the Power System to Study Smart Grid Applications

    SciTech Connect

    Makhmalbaf, Atefe; Fuller, Jason C.; Srivastava, Viraj; Ciraci, Selim; Daily, Jeffrey A.

    2014-12-24

    Modernization of the power system in a way that ensures a sustainable energy system is arguably one of the most pressing concerns of our time. Buildings are important components in the power system. First, they are the main consumers of electricity and secondly, they do not have constant energy demand. Conventionally, electricity has been difficult to store and should be consumed as it is generated. Therefore, maintaining the demand and supply is critical in the power system. However, to reduce the complexity of power models, buildings (i.e., end-use loads) are traditionally modeled and represented as aggregated “dumb” nodes in the power system. This means we lack effective detailed whole building energy models that can support requirements and emerging technologies of the smart power grid. To gain greater insight into the relationship between building energy demand and power system performance, it is important to constitute a co-simulation framework to support detailed building energy modeling and simulation within the power system to study capabilities promised by the modern power grid. This paper discusses ongoing work at Pacific Northwest National Laboratory and presents underlying tools and framework needed to enable co-simulation of building, building energy systems and their control in the power system to study applications such as demand response, grid-based HVAC control, and deployment of buildings for ancillary services. The optimal goal is to develop an integrated modeling and simulation platform that is flexible, reusable, and scalable. Results of this work will contribute to future building and power system studies, especially those related to the integrated ‘smart grid’. Results are also expected to advance power resiliency and local (micro) scale grid studies where several building and renewable energy systems transact energy directly. This paper also reviews some applications that can be supported and studied using the framework introduced

  9. Numerical Study on a Detailed Air Flows in an Urban Area Using a CFD model

    NASA Astrophysics Data System (ADS)

    Kwon, A.

    2014-12-01

    In this study, detailed air flows in an urban area were analyzed using a computational fluid dynamics (CFD) model. For this model buildings used as the surface boundary in the model were constructed using Los Angeles Region Imagery Acquisition Consortium 2 Geographic Information System (LARIAC2 GIS) data. Three target areas centered at the cross roads of Broadway & 7th St., Olive & 12th St., and Wilshire blvd. & Carondelet, Los Angeles, California were considered. The size of each numerical domain is 400 m, 400 m, and 200 m in the x‒, y‒, and z‒directions, respectively. The grid sizes in the x‒, y‒, and z‒directions are 2 m, 2 m, and 2 m, respectively. Based on the inflow wind data provided by California Air Resources Board, detailed flow characteristics were investigated for each target area. Descending air flow were developed at the leeward area of tall building and ascending air current were occurred on the windward area of tall building. Vertically rotating vortices were formed in spaces between buildings, so-called, street canyons and horizontally rotating vortices appeared near cross roads. When flows came into narrow street canyon from wide street canyon, channeling effects appeared and flow speed increased for satisfying mass continuity.

  10. Detailed defect study in proton irradiated InP/Si solar cells

    NASA Astrophysics Data System (ADS)

    Walters, R. J.; Romero, M. J.; Araújo, D.; García, R.; Messenger, S. R.; Summers, G. P.

    1999-10-01

    A detailed study of the effects of proton irradiation-induced defects in heteroepitaxially grown InP/Si solar cells has been made through a combination of cathodoluminescence (CL), electron beam induced current (EBIC), and electrochemical capacitance versus voltage (ECV) carrier profiling measurements. The CL data indicate the distribution of nonradiative recombination centers both before and after proton irradiation, and temperature dependent and spectroscopic analysis of the CL signal give an estimate of the energies of the dominant defect levels. The EBIC data yield an estimate of the magnitude and spatial variation of the minority carrier diffusion length (L) in the base region. Values of L determined from EBIC measurements made on solar cells irradiated by protons ranging in energy from 0.1 up to 4.5 MeV follow a single curve when plotted versus displacement dose, Dd, allowing a single proton damage coefficient to be determined. The ECV measurements show the evolution of the carrier concentration profile in the cell under irradiation, as carrier removal first depletes and eventually type converts the base region. From an in-depth analysis of the combined data, the physical defects that give rise the radiation-induced energy levels are suggested, and a detailed understanding of the physical mechanisms causing the radiation response of InP/Si solar cells is developed.

  11. Environmentally friendly flame retardants. A detailed solid-state NMR study of melamine orthophosphate.

    PubMed

    Brinkmann, Andreas; Litvinov, Victor M; Kentgens, Arno P M

    2007-12-01

    We used solid-state NMR spectroscopy to gain detailed information about the proton positions, proximities and the hydrogen-bonding network in the environmentally friendly flame retardant melamine orthophosphate (MP). High-resolution proton one- and two-dimensional solid-state NMR spectra were obtained at high external magnetic field in combination with fast magic angle spinning of the sample. Furthermore, we recorded homo- and heteronuclear correlation spectra of types (15)N–(15)N, (1)H–(13)C, (1)H–(15)N and (1)H–(31)P. In addition, we determined the geometry of the NH and NH(2) groups in MP by (15)N–(1)H heteronuclear recoupling experiments.We were able to completely assign the different isotropic chemical shifts in MP. Furthermore, we could identify the protonation of the melamine and orthophosphate moieties. The experimental results are discussed in connection with the structural model obtained by powder X-ray diffraction together with a combined molecular modeling-Rietveld refinement approach (De Ridder et al. Helv. Chim. Acta 2004; 87: 1894). We show that the geometry of the NH2 groups can only be successfully estimated by solid-state NMR. PMID:18157843

  12. The Details in the Distributions: Why and how to study phenotypic variability

    PubMed Central

    Geiler-Samerotte, KA; Bauer, CR; Li, S; Ziv, N; Gresham, D; Siegal, ML

    2013-01-01

    Phenotypic variability is present even when genetic and environmental differences between cells are reduced to the greatest possible extent. For example, genetically identical bacteria display differing levels of resistance to antibiotics, clonal yeast populations demonstrate morphological and growth-rate heterogeneity, and mouse blastomeres from the same embryo have stochastic differences in gene expression. However, the distributions of phenotypes present among isogenic organisms are often overlooked; instead, many studies focus on population aggregates such as the mean. The details of these distributions are relevant to major questions in diverse fields, including the evolution of antimicrobial-drug and chemotherapy resistance. We review emerging experimental and statistical techniques that allow rigorous analysis of phenotypic variability and thereby may lead to advances across the biological sciences. PMID:23566377

  13. Contrast to Noise Ratio and Contrast Detail Analysis in Mammography:A Monte Carlo Study

    NASA Astrophysics Data System (ADS)

    Metaxas, V.; Delis, H.; Kalogeropoulou, C.; Zampakis, P.; Panayiotakis, G.

    2015-09-01

    The mammographic spectrum is one of the major factors affecting image quality in mammography. In this study, a Monte Carlo (MC) simulation model was used to evaluate image quality characteristics of various mammographic spectra. The anode/filter combinations evaluated, were those traditionally used in mammography, for tube voltages between 26 and 30 kVp. The imaging performance was investigated in terms of Contrast to Noise Ratio (CNR) and Contrast Detail (CD) analysis, by involving human observers, utilizing a mathematical CD phantom. Soft spectra provided the best characteristics in terms of both CNR and CD scores, while tube voltage had a limited effect. W-anode spectra filtered with k-edge filters demonstrated an improved performance, that sometimes was better compared to softer x-ray spectra, produced by Mo or Rh anode. Regarding the filter material, k-edge filters showed superior performance compared to Al filters.

  14. A detailed kinetic modeling study of aromatics formation in laminar premixed acetylene and ethylene flames

    SciTech Connect

    Wang, H.; Frenklach, M.

    1997-07-01

    A computational study was performed for the formation and growth of polycyclic aromatic hydrocarbons (PAHs) in laminar premixed acetylene and ethylene flames. A new detailed reaction mechanism describing fuel pyrolysis and oxidation, benzene formation, and PAH mass growth and oxidation is presented and critically tested. It is shown that the reaction model predicts reasonably well the concentration profiles of major and intermediate species and aromatic molecules in a number of acetylene and ethylene flames reported in the literature. It is demonstrated that reactions of n-C{sub 4}H{sub x} + C{sub 2}H{sub 2} leading to the formation of one-ring aromatics are as important as the propargyl recombination, and hence must be included in kinetic modeling of PAH formation in hydrocarbon flames. It is further demonstrated that the mass growth of PAHs can be accounted for by the previously proposed H-abstraction-C{sub 2}H{sub 2}-addiction mechanism.

  15. Detailed Studies of Pixelated CZT Detectors Grown with the Modified Horizontal Bridgman Method

    NASA Technical Reports Server (NTRS)

    Jung, I.; Krawczynski, H.; Burger, A.; Guo, M.; Groza, M.

    2007-01-01

    The detector material Cadmium Zinc Telluride (CZT) achieves excellent spatial resolution and good energy resolution over a broad energy range, several keV up to some MeV. Presently, there are two main methods to grow CZT crystals, the Modified High-Pressure Bridgman (MHB) and the High-Pressure Bridgman (HPB) process. The study presented in this paper is based on MHB CZT substrates from the company Orbotech Medical Solutions Ltd. [Orbotech Medical Solutions Ltd., 10 Plaut St., Park Rabin, P.O. Box 2489, Rehovot, Israel, 76124]. Former studies have shown that high-work-function materials on the cathode side reduce the leakage current and, therefore, improve the energy resolution at lower energies. None of the studies have emphasized on the anode contact material. Therefore, we present in this paper the result of a detailed study in which for the first time the cathode material was kept constant and the anode material was varied. We used four different anode materials: Indium, Titanium, Chromium and Gold, metals with work-functions between 4.1 eV and 5.1 eV. The detector size was 2.0 x 2.0 x 0.5 cu cm with 8 x 8 pixels and a pitch of 2.46 mm. The best performance was achieved with the low-work-function materials Indium and Titanium with energy resolutions of 2.0 keV (at 59 keV) and 1.9 keV (at 122 keV) for Titanium and 2.1 keV (at 59 keV) and 2.9 keV (at 122 keV) for Indium. Taking into account the large pixel pitch of 2.46 mm, these resolutions are very competitive in comparison to those achieved with detectors made of material produced with the more expensive conventional HPB method. We present a detailed comparison of our detector response with 3D simulations. The latter comparisons allow us to determine the mobility-lifetime-products (mu tau-products) for electrons and holes. Finally, we evaluated the temperature dependency of the detector performance and ls-products. For many applications temperature dependence is important, therefore, we extended the scope of

  16. Fracture Network Characteristics Informed by Detailed Studies of Chlorinated Solvent Plumes in Sedimentary Rock Aquifers

    NASA Astrophysics Data System (ADS)

    Parker, B. L.; Chapman, S.

    2015-12-01

    Various numerical approaches have been used to simulate contaminant plumes in fractured porous rock, but the one that allows field and laboratory measurements to be most directly used as inputs to these models is the Discrete Fracture Network (DFN) Approach. To effectively account for fracture-matrix interactions, emphasis must be placed on identifying and parameterizing all of the fractures that participate substantially in groundwater flow and contaminated transport. High resolution plume studies at four primary research sites, where chlorinated solvent plumes serve as long-term (several decades) tracer tests, provide insight concerning the density of the fracture network unattainable by conventional methods. Datasets include contaminant profiles from detailed VOC subsampling informed by continuous core logs, hydraulic head and transmissivity profiles, packer testing and sensitive temperature logging methods in FLUTe™ lined holes. These show presence of many more transmissive fractures, contrasting observations of only a few flow zones per borehole obtained from conventional hydraulic tests including flow metering in open boreholes. Incorporating many more fractures with a wider range of transmissivities is key to predicting contaminant migration. This new understanding of dense fracture networks combined with matrix property measurements have informed 2-D DFN flow and transport modelling using Fractran and HydroGeosphere to simulate plume characteristics ground-truthed by detailed field site plume characterization. These process-based simulations corroborate field findings that plumes in sedimentary rock after decades of transport show limited plume front distances and strong internal plume attenuation by diffusion, transverse dispersion and slow degradation. This successful application of DFN modeling informed by field-derived parameters demonstrates how the DFN Approach can be applied to other sites to inform plume migration rates and remedial efficacy.

  17. Anatomically Detailed and Large-Scale Simulations Studying Synapse Loss and Synchrony Using NeuroBox

    PubMed Central

    Breit, Markus; Stepniewski, Martin; Grein, Stephan; Gottmann, Pascal; Reinhardt, Lukas; Queisser, Gillian

    2016-01-01

    The morphology of neurons and networks plays an important role in processing electrical and biochemical signals. Based on neuronal reconstructions, which are becoming abundantly available through databases such as NeuroMorpho.org, numerical simulations of Hodgkin-Huxley-type equations, coupled to biochemical models, can be performed in order to systematically investigate the influence of cellular morphology and the connectivity pattern in networks on the underlying function. Development in the area of synthetic neural network generation and morphology reconstruction from microscopy data has brought forth the software tool NeuGen. Coupling this morphology data (either from databases, synthetic, or reconstruction) to the simulation platform UG 4 (which harbors a neuroscientific portfolio) and VRL-Studio, has brought forth the extendible toolbox NeuroBox. NeuroBox allows users to perform numerical simulations on hybrid-dimensional morphology representations. The code basis is designed in a modular way, such that e.g., new channel or synapse types can be added to the library. Workflows can be specified through scripts or through the VRL-Studio graphical workflow representation. Third-party tools, such as ImageJ, can be added to NeuroBox workflows. In this paper, NeuroBox is used to study the electrical and biochemical effects of synapse loss vs. synchrony in neurons, to investigate large morphology data sets within detailed biophysical simulations, and used to demonstrate the capability of utilizing high-performance computing infrastructure for large scale network simulations. Using new synapse distribution methods and Finite Volume based numerical solvers for compartment-type models, our results demonstrate how an increase in synaptic synchronization can compensate synapse loss at the electrical and calcium level, and how detailed neuronal morphology can be integrated in large-scale network simulations. PMID:26903818

  18. Postural and Intention Tremors: A Detailed Clinical Study of Essential Tremor vs. Parkinson’s Disease

    PubMed Central

    Sternberg, Eliezer J.; Alcalay, Roy N.; Levy, Oren A.; Louis, Elan D.

    2013-01-01

    Background: An estimated 30–50% of essential tremor (ET) diagnoses are incorrect, and the true diagnosis in those patients is often Parkinson’s disease (PD) or other tremor disorders. There are general statements about the tremor in these ET and PD, but published data on the more subtle characteristics of tremor are surprisingly limited. Postural tremor may occur in both disorders, adding to the difficulty. There are several anecdotal impressions regarding specific features of postural tremor in ET vs. PD, including joint distribution (e.g., phalanges, metacarpal-phalangeal joints, wrist), tremor directionality (e.g., flexion-extension vs. pronation-supination), and presence of intention tremor. However, there is little data to support these impressions. Methods: In this cross-sectional study, 100 patients (ET, 50 PD) underwent detailed videotaped neurological examinations. Arm tremor was rated by a movement disorder neurologist who assessed severity and directionality across multiple joints. Results: During sustained arm extension, ET patients exhibited more wrist than metacarpal-phalangeal and phalangeal joint tremor than did PD patients (p < 0.001), and more wrist flexion-extension tremor than wrist pronation-supination tremor (p < 0.001). During the finger-nose-finger maneuver, intention tremor was present in approximately one in four (28%) ET patients vs. virtually none (4%) of the Parkinson’s patients (p < 0.001). Conclusions: We evaluated the location, severity, and directionality of postural tremor in ET and PD, and the presence of intention tremor, observing several clinical differences. We hope that detailed phenomenological data on tremor in ET and PD will help practicing physicians delineate the two diseases. PMID:23717300

  19. A detailed MSn study for the molecular identification of a dimer formed from oxidation of pinene

    NASA Astrophysics Data System (ADS)

    Beck, Martin; Hoffmann, Thorsten

    2016-04-01

    Dimeric products formed in the oxidation of α- and β-pinene have been frequently observed in laboratory and field studies of biogenic SOA formation. While their existence is undoubted, their exact chemical structures remain unclear. This study uses a combined two step approach aiming on the molecular identification of the most important of the various dimers that have been observed in biogenic secondary organic aerosol formation, a dimer with the molecular weight 358 g mol-1. The first step is the application of a functional group derivatization technique (esterification) to quantify the number of carboxylic acid groups in the target molecule. Based on the detailed interpretation of the MSn spectra (up to n = 7) of the derivatized product further information about the exact structure of the compound of interest is compiled. To increase the intensity of precursor ions for the MSn-studies and especially to facilitate successive fragmentation of the target molecule, which yields structurally informative product spectra, cationization reagents (Li+, NH4+) are introduced. The results clearly point to the formation of a dimer containing three carboxylic acid groups and a structure containing a terpenylic acid building block and a pinic acid building block, strongly supporting a structure suggestion by Claeys and coworkers (Yasmeen et al., 2010).

  20. Additional studies for the spectrophotometric measurement of iodine in water

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Previous work in iodine spectroscopy is briefly reviewed. Continued studies of the direct spectrophotometric determination of aqueous iodine complexed with potassium iodide show that free iodine is optimally determined at the isosbestic point for these solutions. The effects on iodine determinations of turbidity and chemical substances (in trace amounts) is discussed and illustrated. At the levels tested, iodine measurements are not significantly altered by such substances. A preliminary design for an on-line, automated iodine monitor with eventual capability of operating also as a controller was analyzed and developed in detail with respect single beam colorimeter operating at two wavelengths (using a rotating filter wheel). A flow-through sample cell allows the instrument to operate continuously, except for momentary stop flow when measurements are made. The timed automatic cycling of the system may be interrupted whenever desired, for manual operation. An analog output signal permits controlling an iodine generator.

  1. Detailed Studies on Flame Extinction by Inert Particles in Normal- and Micro-gravity

    NASA Technical Reports Server (NTRS)

    Andac, M. G.; Egolfopoulos, F. N.; Campbell, C. S.

    2001-01-01

    The combustion of dusty flows has been studied to lesser extent than pure gas phase flows and sprays. Particles can have a strong effect by modifying the dynamic response and detailed structure of flames through the dynamic, thermal, and chemical couplings between the two phases. A rigorous understanding of the dynamics and structure of two-phase flows can be attained in stagnation flow configurations, which have been used by others to study spray combustion as well as reacting dusty flows. In earlier studies on reacting dusty flows, the thermal coupling between the two phases as well as the effect of gravity on the flame response were not considered. However, in Ref. 6, the thermal coupling between chemically inert particles and the gas was addressed in premixed flames. The effects of gravity was also studied showing that it can substantially affect the profiles of the particle velocity, number density, mass flux, and temperature. The results showed a strong dynamic and thermal dependence of reacting dusty flows to particle number density. However, the work was only numerical and limited to twin-flames, stagnation, premixed flames. In Ref. 7 the effects of chemically inert particle clouds on the extinction of strained premixed and non-premixed flames were studied both experimentally and numerically at 1-g. It was shown and explained that large particles can cause more effective flame cooling compared to smaller particles. The effects of flame configuration and particle injection orientation were also addressed. The complexity of the coupling between the various parameters in such flows was demonstrated and it was shown that it was impossible to obtain a simple and still meaningful scaling that captured all the pertinent physics.

  2. Role of hydrogen abstraction acetylene addition mechanisms in the formation of chlorinated naphthalenes. 2. Kinetic modeling and the detailed mechanism of ring closure.

    PubMed

    McIntosh, Grant J; Russell, Douglas K

    2014-12-26

    The dominant formation mechanisms of chlorinated phenylacetylenes, naphthalenes, and phenylvinylacetylenes in relatively low pressure and temperature (∼40 Torr and 1000 K) pyrolysis systems are explored. Mechanism elucidation is achieved through a combination of theoretical and experimental techniques, the former employing a novel simplification of kinetic modeling which utilizes rate constants in a probabilistic framework. Contemporary formation schemes of the compounds of interest generally require successive additions of acetylene to phenyl radicals. As such, infrared laser powered homogeneous pyrolyses of dichloro- or trichloroethylene were perturbed with 1,2,4- or 1,2,3-trichlorobenzene. The resulting changes in product identities were compared with the major products expected from conventional pathways, aided by the results of our previous computational work. This analysis suggests that a Bittner-Howard growth mechanism, with a novel amendment to the conventional scheme made just prior to ring closure, describes the major products well. Expected products from a number of other potentially operative channels are shown to be incongruent with experiment, further supporting the role of Bittner-Howard channels as the unique pathway to naphthalene growth. A simple quantitative analysis which performs very well is achieved by considering the reaction scheme as a probability tree, with relative rate constants being cast as branching probabilities. This analysis describes all chlorinated phenylacetylene, naphthalene, and phenylvinylacetylene congeners. The scheme is then tested in a more general system, i.e., not enforcing a hydrogen abstraction/acetylene addition mechanism, by pyrolyzing mixtures of di- and trichloroethylene without the addition of an aromatic precursor. The model indicates that these mechanisms are still likely to be operative.

  3. Detailed model study of dissipative quantum dynamics of K2 attached to helium nanodroplets

    NASA Astrophysics Data System (ADS)

    Schlesinger, Martin; Strunz, Walter T.

    2012-01-01

    We thoroughly investigate vibrational quantum dynamics of dimers attached to He droplets, motivated by recent measurements with K2 (Claas et al 2006 J. Phys. B: At. Mol. Opt. Phys. 39 S1151). For those femtosecond pump-probe experiments, the crucial observed features are not reproduced by gas-phase calculations, but agreement is found using a description based on dissipative quantum dynamics, as briefly shown in the work by Schlesinger et al (2010 Chem. Phys. Lett. 490 245-8). Here we present a detailed study of the influence of possible effects induced by the droplet. The helium droplet causes electronic decoherence, shifts of potential surfaces and relaxation of wave packets in attached dimers. Moreover, a realistic description of (stochastic) desorption of dimers off the droplet needs to be taken into account. Step by step, we include and study the importance of these effects in our full quantum calculation of the effective dimer dynamics. This approach allows us to reproduce and explain all major experimental findings. We find that desorption is fast and occurs within 2-10 ps after electronic excitation. A further finding is that slow vibrational motion in the ground state can be considered frictionless.

  4. A novel material detection algorithm based on 2D GMM-based power density function and image detail addition scheme in dual energy X-ray images.

    PubMed

    Pourghassem, Hossein

    2012-01-01

    Material detection is a vital need in dual energy X-ray luggage inspection systems at security of airport and strategic places. In this paper, a novel material detection algorithm based on statistical trainable models using 2-Dimensional power density function (PDF) of three material categories in dual energy X-ray images is proposed. In this algorithm, the PDF of each material category as a statistical model is estimated from transmission measurement values of low and high energy X-ray images by Gaussian Mixture Models (GMM). Material label of each pixel of object is determined based on dependency probability of its transmission measurement values in the low and high energy to PDF of three material categories (metallic, organic and mixed materials). The performance of material detection algorithm is improved by a maximum voting scheme in a neighborhood of image as a post-processing stage. Using two background removing and denoising stages, high and low energy X-ray images are enhanced as a pre-processing procedure. For improving the discrimination capability of the proposed material detection algorithm, the details of the low and high energy X-ray images are added to constructed color image which includes three colors (orange, blue and green) for representing the organic, metallic and mixed materials. The proposed algorithm is evaluated on real images that had been captured from a commercial dual energy X-ray luggage inspection system. The obtained results show that the proposed algorithm is effective and operative in detection of the metallic, organic and mixed materials with acceptable accuracy.

  5. Benchmark Study of Industrial Needs for Additive Manufacturing in Finland

    NASA Astrophysics Data System (ADS)

    Lindqvist, Markku; Piili, Heidi; Salminen, Antti

    Additive manufacturing (AM) is a modern way to produce parts for industrial use. Even though the technical knowledge and research of AM processes are strong in Finland, there are only few industrial applications. Aim of this study is to collect practical knowledge of companies who are interested in industrial use of AM, especially in South-Eastern Finland. Goal of this study is also to investigate demands and requirements of applications for industrial use of AM in this area of Finland. It was concluded, that two of the reasons prohibiting wider industrial use of AM in Finland, are wrong expectations against this technology as well as lack of basic knowledge of possibilities of the technology. Especially, it was noticed that strong 3D-hype is even causing misunderstandings. Nevertheless, the high-level industrial know-how in the area, built around Finnish lumber industry is a strong foundation for the additive manufacturing technology.

  6. Electrostatic Levitation for Studies of Additive Manufactured Materials

    NASA Technical Reports Server (NTRS)

    SanSoucie, Michael P.; Rogers, Jan R.; Tramel, Terri

    2014-01-01

    The electrostatic levitation (ESL) laboratory at NASA's Marshall Space Flight Center is a unique facility for investigators studying high temperature materials. The laboratory boasts two levitators in which samples can be levitated, heated, melted, undercooled, and resolidified. Electrostatic levitation minimizes gravitational effects and allows materials to be studied without contact with a container or instrumentation. The lab also has a high temperature emissivity measurement system, which provides normal spectral and normal total emissivity measurements at use temperature. The ESL lab has been instrumental in many pioneering materials investigations of thermophysical properties, e.g., creep measurements, solidification, triggered nucleation, and emissivity at high temperatures. Research in the ESL lab has already led to the development of advanced high temperature materials for aerospace applications, coatings for rocket nozzles, improved medical and industrial optics, metallic glasses, ablatives for reentry vehicles, and materials with memory. Modeling of additive manufacturing materials processing is necessary for the study of their resulting materials properties. In addition, the modeling of the selective laser melting processes and its materials property predictions are also underway. Unfortunately, there is very little data for the properties of these materials, especially of the materials in the liquid state. Some method to measure thermophysical properties of additive manufacturing materials is necessary. The ESL lab is ideal for these studies. The lab can provide surface tension and viscosity of molten materials, density measurements, emissivity measurements, and even creep strength measurements. The ESL lab can also determine melting temperature, surface temperatures, and phase transition temperatures of additive manufactured materials. This presentation will provide background on the ESL lab and its capabilities, provide an approach to using the ESL

  7. A Study of Additive Noise Model for Robust Speech Recognition

    NASA Astrophysics Data System (ADS)

    Awatade, Manisha H.

    2011-12-01

    A model of how speech amplitude spectra are affected by additive noise is studied. Acoustic features are extracted based on the noise robust parts of speech spectra without losing discriminative information. An existing two non-linear processing methods, harmonic demodulation and spectral peak-to-valley ratio locking, are designed to minimize mismatch between clean and noisy speech features. Previously studied methods, including peak isolation [1], do not require noise estimation and are effective in dealing with both stationary and non-stationary noise.

  8. Vadose Zone Transport Field Study: Detailed Test Plan for Simulated Leak Tests

    SciTech Connect

    Ward, Anderson L.; Gee, Glendon W.

    2000-06-23

    This report describes controlled transport experiments at well-instrumented field tests to be conducted during FY 2000 in support of DOE?s Vadose Zone Transport Field Study (VZTFS). The VZTFS supports the Groundwater/Vadose Zone Integration Project Science and Technology Initiative. The field tests will improve understanding of field-scale transport and lead to the development or identification of efficient and cost-effective characterization methods. These methods will capture the extent of contaminant plumes using existing steel-cased boreholes. Specific objectives are to 1) identify mechanisms controlling transport processes in soils typical of the hydrogeologic conditions of Hanford?s waste disposal sites; 2) reduce uncertainty in conceptual models; 3) develop a detailed and accurate data base of hydraulic and transport parameters for validation of three-dimensional numerical models; and 4) identify and evaluate advanced, cost-effective characterization methods with the potential to assess changing conditions in the vadose zone, particularly as surrogates of currently undetectable high-risk contaminants. Pacific Northwest National Laboratory (PNNL) manages the VZTFS for DOE.

  9. A Detailed Study on the Low-Energy Structures of Charged Colloidal Clusters.

    PubMed

    Cruz, S M A; Marques, J M C

    2016-04-01

    The target of this investigation is the systematic characterization of the low-energy structures of charged colloidal clusters that may be important to understand the self-assembling process of biomolecules. The aggregation of charged colloidal particles is governed by the attractive short-ranged Morse potential and the Yukawa repulsive tail to describe the long-range charge effect. A global optimization strategy, based on our own evolutionary algorithm, was adopted to discover the low-energy structures of colloidal clusters composed of up to 20 particles. A detailed analysis of the low-energy structures involving charged particles shows that the appearance of the Bernal spiral as the most stable motif occurs, first, at N = 6, but it is favored for larger clusters (N ≥ 13); for 6 ≤ N ≤ 12, there is a competition between the spiral (which is favored for higher charges) and more spherical-like structures. Finally, we study binary clusters composed by two sets of differently charged colloidal particles. Although a great diversity of low-energy structures is observed (especially for aggregates with one of the components in excess), the global minimum is disputed by three structural motifs depending on the composition of the cluster and, in some cases, on the range of the Morse potential. PMID:26986933

  10. RADIATIVE OPACITY OF IRON STUDIED USING A DETAILED LEVEL ACCOUNTING MODEL

    SciTech Connect

    Jin Fengtao; Zeng Jiaolong; Yuan Jianmin; Huang Tianxuan; Ding Yongkun; Zheng Zhijian

    2009-03-01

    The opacity of iron plasma in local thermodynamic equilibrium is studied using an independently developed detailed level accounting model. Atomic data are generated by solving the full relativistic Dirac-Fock equations. State mixing within one electronic configuration is considered to include part of the correlations between electrons without configuration interaction matrices that are too large being involved. Simulations are carried out and compared with several recent experimental transmission spectra in the M- and L-shell absorption regions to reveal the high accuracy of the model. The present model is also compared with the OPAL, LEDCOP and OP models for two isothermal series at T = 20 eV and T = 19.3 eV. It is found that our model is in good agreement with OPAL and LEDCOP while it has discrepancies with OP at high densities. Systematic Rosseland and Planck mean opacities in the range 10-1000 eV for temperature and 10{sup -5}-10{sup -1} g cm{sup -3} for density are also presented and compared with LEDCOP results, finding good agreement at lower temperatures but apparent differences at high temperatures where the L- and K-shell absorptions are dominant.

  11. Detailed Studies of the Axial Summit Trough of the East Pacific Rise 9-10N

    NASA Astrophysics Data System (ADS)

    Fornari, D. J.; Soule, S. A.; Escartin, J.; Perfit, M.; Tivey, M.; Schouten, H.; Ferrini, V. L.

    2005-12-01

    The axial summit trough is a nearly continuous feature along the East Pacific Rise from 9-10 deg. N. The AST marks the central spreading axis of the ridge, is the site of the bulk of the volcanic eruptions, and hosts the majority of hydrothermal vent sites. In the past, the AST has been interpreted to be a purely tectonic or purely volcanic feature. Detailed analysis of sidescan imagery and high-resolution microbathymetry are used to identify the morphology and structural variability of the axial summit trough (AST) along the EPR crest in the study area. We use these data to address questions related to the causes for variability in width and character of the AST and how those parameters relate to the morphology and volcanic history of adjacent seafloor, relationships between lava flows and faults and fissures developed within ~4 km of the AST, and the frequency and size of volcanic eruptions. With constraints from microbathymetry data and knowledge of the detailed volcanic contacts along the EPR 9-10N AST derived from Alvin and towed camera data, we explore models of AST formation in an effort to better understand relationships between dike intrusion and how extensional strain is accommodated across the EPR axis. Assuming purely tectonic origins for the AST, 3D boundary element modeling suggests that dike widths and the levels to which dikes rise beneath the EPR axis are variable along-axis. For well-mapped portions of the AST we are able to infer the number of dikes needed to produce its current geometry, and as a result, the timescale of formation. Where the ridge is most volcanically active, we find that modeled dike widths and depths are unreasonable, and suggest that volcanic overprinting has modified the character of the AST. We conclude that both volcanic and tectonic processes are responsible for the formation of the AST and that the balance between these parameters controls the physical characteristics of the AST observed on the seafloor today.

  12. Microwave sanitization of color additives used in cosmetics: feasibility study.

    PubMed

    Jasnow, S B; Smith, J L

    1975-08-01

    Microwave exposure has been explored as a method of microbiologically sanitizing color additives used in cosmetic products. Selected microbiologically unacceptable cosmetic color additives, D&C red no. 7 Ca lake (certified synthetic organic color), carmine (natural organic color not subject to certification), and chromium hydroxide green (inorganic color not subject to certification), were submitted to microwave exposure. Gram-negative bacteria were eliminated, as verified by enrichment procedures, and levels of gram-positive bacteria were reduced. Generally, analytical and dermal safety studies indicated no significant alterations in physical, chemical, and toxicological properties of the colors. Sanitization was also successfully performed on other colors (D&C red no. 9 Ba lake, D&C red no. 12 Ba lake, D&C green no. 5, and FD&C red no. 4); initial physical and chemical tests were satisfactory. Results indicated that this method of sanitization is feasible and warrants further investigation.

  13. BIG FROG WILDERNESS STUDY AREA AND ADDITIONS, TENNESSEE AND GEORGIA.

    USGS Publications Warehouse

    Slack, John F.; Gazdik, Gertrude C.

    1984-01-01

    A mineral-resource survey was made of the Big Frog Wilderness Study Area and additions, Tennessee-Georgia. Geochemical sampling found traces of gold, zinc, copper, and arsenic in rocks, stream sediments, and panned concentrates, but not in sufficient quantities to indicate the presence of deposits of these metals. The results of the survey indicate that there is little promise for the occurrence of metallic mineral deposits within the study area. The only apparent resources are nonmetallic commodities including rock suitable for construction materials, and small amounts of sand and gravel; however, these commodities are found in abundance outside the study area. A potential may exist for oil and natural gas at great depths, but this cannot be evaluated by the present study.

  14. Detailed Study of Emission Structures in the Vicinity of LkHα 198

    NASA Astrophysics Data System (ADS)

    Gevorgyan, M. H.; Movsessian, T. A.; Andreasyan, H. R.; Magakian, T. Yu.

    2016-09-01

    Results from a study of collimated flows near the star LkHα 198 are reported. Observations were made using the VAGR multipupil spectrograph installed on the 2.6-m telescope at the Byurakan Astrophysical Observatory. The morphology and kinematics of emission structures in the vicinity of LkHα 198, including HH 161, were studied and electron density charts obtained. Besides the HH 161 object, our data revealed an arc-shaped emission structure with LkHα 198 at its apex. A shape of this kind is usually a direct indication of the presence of a cavity in a dark cloud blown out by a directed outflow. In addition, a faint "tail" extending in the direction of the central star is observed in HH 161. A comparison of these results with radio frequency observations shows that the probable source of HH 161 is the binary system LkHα 198.

  15. Do Learner Characteristics Moderate the Seductive-Details-Effect? A Cognitive-Load-Study Using Eye-Tracking

    ERIC Educational Resources Information Center

    Park, Babette; Korbach, Andreas; Brünken, Roland

    2015-01-01

    The present study examines whether the seductive-details effect is moderated by spatial ability and prior knowledge, which are two of the most relevant learner characteristics in multimedia learning. It is assumed that the seductive-details effect with an increase in extraneous cognitive load and a decrease in perceptual processing and learning…

  16. Recommended Protocol for Round Robin Studies in Additive Manufacturing

    PubMed Central

    Moylan, Shawn; Brown, Christopher U.; Slotwinski, John

    2016-01-01

    One way to improve confidence and encourage proliferation of additive manufacturing (AM) technologies and parts is by generating more high quality data describing the performance of AM processes and parts. Many in the AM community see round robin studies as a way to generate large data sets while distributing the cost among the participants, thereby reducing the cost to individual users. The National Institute of Standards and Technology (NIST) has conducted and participated in several of these AM round robin studies. While the results of these studies are interesting and informative, many of the lessons learned in conducting these studies concern the logistics and methods of the study and unique issues presented by AM. Existing standards for conducting interlaboratory studies of measurement methods, along with NIST’s experience, form the basis for recommended protocols for conducting AM round robin studies. The role of round robin studies in AM qualification, some of the limitations of round robin studies, and the potential benefit of less formal collaborative experiments where multiple factors, AM machine being only one, are varied simultaneously are also discussed. PMID:27274602

  17. Making intelligent systems team players: Additional case studies

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.; Schreckenghost, Debra L.; Rhoads, Ron W.

    1993-01-01

    Observations from a case study of intelligent systems are reported as part of a multi-year interdisciplinary effort to provide guidance and assistance for designers of intelligent systems and their user interfaces. A series of studies were conducted to investigate issues in designing intelligent fault management systems in aerospace applications for effective human-computer interaction. The results of the initial study are documented in two NASA technical memoranda: TM 104738 Making Intelligent Systems Team Players: Case Studies and Design Issues, Volumes 1 and 2; and TM 104751, Making Intelligent Systems Team Players: Overview for Designers. The objective of this additional study was to broaden the investigation of human-computer interaction design issues beyond the focus on monitoring and fault detection in the initial study. The results of this second study are documented which is intended as a supplement to the original design guidance documents. These results should be of interest to designers of intelligent systems for use in real-time operations, and to researchers in the areas of human-computer interaction and artificial intelligence.

  18. RAMSEYS DRAFT WILDERNESS STUDY AREA AND ADDITION, VIRGINIA.

    USGS Publications Warehouse

    Lesure, Frank G.; Mory, Peter C.

    1984-01-01

    Mineral-resource surveys of the Ramseys Draft Wilderness Study Area and adjoining roadless area addition in George Washington National Forest in the western valley and ridge province, Augusta and Highland Counties, Virginia, were done. The surveys outlined three small areas containing anomalous amounts of copper, lead, and zinc related to stratabound red-bed copper mineralization, but these occurrences are not large and are not considered as having mineral-resource potential. The area contains abundant sandstone suitable for construction materials and shale suitable for making brick, tile, and other low-grade ceramic products, but these commodities occur in abundance outside the wilderness study area. Structural conditions are probably favorable for the accumulation of natural gas, but exploratory drilling has not been done sufficiently near the area to evaluate the gas potential.

  19. Rotor systems research aircraft predesign study. Volume 4: Preliminary draft detail specification

    NASA Technical Reports Server (NTRS)

    Miller, A. N.; Linden, A. W.

    1972-01-01

    The RSRA requirements are presented in a detail specification format. Coverage of the requirements includes the following headings: (1) aircraft characteristics, (2) general features of design and construction, (3) aerodynamics, (4) structural design criteria, (5) flight control system, (6) propulsion subsystem, and (7) secondary power and distribution subsystem.

  20. A STUDY OF GAS-PHASE MERCURY SPECIATION USING DETAILED CHEMICAL KINETICS

    EPA Science Inventory

    Mercury (Hg) speciation in combustion-generated flue gas is modeled using a detailed chemical mechanism consisting of 60 reactions and 21 species. This speciation model accounts for chlorination and oxidation of key flue-gas components, including elemental mercury. Results indica...

  1. Probing interactions of neurotransmitters with twin tailed anionic surfactant: A detailed physicochemical study.

    PubMed

    Kaur, Rajwinder; Sanan, Reshu; Mahajan, Rakesh Kumar

    2016-05-01

    Keeping in view the role of neurotransmitters (NTs) in central nervous system diseases and in controlling various physiological processes, present study is aimed to study the binding of neurotransmitters (NTs) such as norepinephrine hydrochloride (NE) and serotonin hydrochloride (5-HT) with twin tailed surfactant sodium bis(2-ethylhexyl)sulfosuccinate (AOT). Spectroscopic and electrochemical measurements combined with microcalorimetric measurements were used to characterize the interactions between AOT and NTs. Meteoric modifications to emission profile and absorption spectra of NTs upon addition of AOT are indicative of the binding of NTs with AOT. Distinct interactional states such as formation of ion-pairs, induced and regular micelles with adsorbed NTs molecules have been observed in different concentration regimes of AOT. The formation of ion-pairs from oppositely charged NTs and AOT is confirmed by the reduced absorbance, quenched fluorescence intensity and decrease in peak current (ipa) as well as shifts in peak potential (Epa) values. The stoichiometry and formation of the NTs-AOT complexes has been judged and the extent of interactions is quantitatively discussed in terms of binding constant (K) and free energy of binding (ΔG°). The enthalpy (ΔH°mic) and free energy of micellization (ΔG°mic) for AOT in presence and absence of NTs are determined from the enthalpy curves.

  2. A detailed study of the structure of the nested planetary nebula, Hb 12, the Matryoshka nebula

    SciTech Connect

    Clark, D. M.; López, J. A.; Edwards, M. L.; Winge, C. E-mail: jal@astrosen.unam.mx E-mail: cwinge@gemini.edu

    2014-11-01

    We present near-IR, integral field spectroscopic observations of the planetary nebula (PN) Hb 12 using Near-infrared Integral Field Spectrograph (NIFS) on Gemini-North. Combining NIFS with the adaptive optics system Altair, we provide a detailed study of the core and inner structure of this PN. We focus the analysis in the prominent emission lines [Fe II] (1.6436 μm), He I (2.0585 μm), H{sub 2} (2.1214 μm), and Br{sub γ} (2.16553 μm). We find that the [Fe II] emission traces a tilted system of bipolar lobes, with the northern lobe being redshifted and the southern lobe blueshifted. The [Fe II] emission is very faint at the core and only present close to the systemic velocity. There is no H{sub 2} emission in the core, whereas the core is prominent in the He I and Br{sub γ} recombination lines. The H{sub 2} emission is concentrated in equatorial arcs of emission surrounding the core and expanding at ∼30 km s{sup –1}. These arcs are compared with Hubble Space Telescope images and shown to represent nested loops belonging to the inner sections of a much larger bipolar structure that replicates the inner one. The He I and Br{sub γ} emission from the core clearly show a cylindrical central cavity that seems to represent the inner walls of an equatorial density enhancement or torus. The torus is 0.''2 wide (≡200 AU radius at a distance of 2000 pc) and expanding at ≤30 km s{sup –1}. The eastern wall of the inner torus is consistently more intense than the western wall, which could indicate the presence of an off-center star, such as is observed in the similar hourglass PN, MyCn 18. A bipolar outflow is also detected in Br{sub γ} emerging within 0.''1 from the core at ∼ ± 40 km s{sup –1}.

  3. Detailed studies of shock-cloud interaction toward the young supernova remnants

    NASA Astrophysics Data System (ADS)

    Sano, H.; Fukui, Y.

    2016-06-01

    In young supernova remnants (SNRs; ˜2000 yrs), the study of the interaction between the shock waves and the inhomogeneous interstellar gas is a key element in understanding the SNR evolution, cosmic-ray acceleration, and multi-wavelength emission. In particular, TeV γ-ray and synchrotron X-ray bright SNRs, RX J1713.7-3946, RX J0852.0-4622, and N132D have been considered good candidates for an efficient cosmic-ray accelerator via shock-cloud interaction (Sano et al. 2013, 2015a; Fukui 2013). In RXJ1713, we performed imaging and spectral analysis of the Suzaku X-rays and compared it with the interstellar gas distribution (Sano et al. 2013; 2015b). The shock interaction with dense gas clumps enhances turbulence and magnetic fields up to mG around the clumps, which was observed as limb-brightening of the synchrotron X-rays and hard spectra with photon indexes of less than 2.4. Moreover, turbulence and magnetic field amplifications may promote an additional acceleration of cosmic-ray electrons. In contrast, the synchrotron X-rays also become bright toward diffuse gas regions due to the high shock velocity. In this talk, we introduce the recent results of shock-cloud interaction toward RX J1713.7-3946, RX J0852.0-4622, and N132D using the Suzaku, XMM-Newton, Chandra X-rays, and interstellar gas datasets.

  4. Technical notes: A detailed study for the provision of measurement uncertainty and traceability for goniospectrometers

    NASA Astrophysics Data System (ADS)

    Peltoniemi, Jouni I.; Hakala, Teemu; Suomalainen, Juha; Honkavaara, Eija; Markelin, Lauri; Gritsevich, Maria; Eskelinen, Juho; Jaanson, Priit; Ikonen, Erkki

    2014-10-01

    The measurement uncertainty and traceability of the Finnish Geodetic Institutess field gonio-spectro-polarimeter FIGIFIGO have been assessed. First, the reference standard (Spectralon sample) was measured at the National Standard Laboratory of MIKES-Aalto. This standard was transferred to FGIs field reference standard (larger Spectralon sample), and from that to the unmanned aerial vehicle (UAV), reference standards (1 m2 plates). The reflectance measurement uncertainty of FIGIFIGO has been estimated to be 0.01 in ideal laboratory conditions, but about 0.02-0.05 in typical field conditions, larger at larger solar or observation zenith angles. Target specific uncertainties can increase total uncertainty even to 0.1-0.2. The angular reading uncertainty is between 1° and 3°, depending on user selection, and the polarisation uncertainty is around 0.01. For UAV, the transferred reflectance uncertainty is about 0.05-0.1, depending on, how ideal the measurement conditions are. The design concept of FIGIFIGO has been proved to have a number of advantages, such as a well-adopted user-friendly interface, a high level of automation and excellent suitability for the field measurements. It is a perfect instrument for collection of reference data on a given target in natural (and well-recorded) conditions. In addition to the strong points of FIGIFIGO, the current study reveals several issues that need further attention, such as the field of view, illumination quality, polarisation calibration, Spectralon reflectance and polarisation properties in the 1000-2400 nm range.

  5. Exploring the roles of spectral detail and intonation contour in speech intelligibility: an FMRI study.

    PubMed

    Kyong, Jeong S; Scott, Sophie K; Rosen, Stuart; Howe, Timothy B; Agnew, Zarinah K; McGettigan, Carolyn

    2014-08-01

    The melodic contour of speech forms an important perceptual aspect of tonal and nontonal languages and an important limiting factor on the intelligibility of speech heard through a cochlear implant. Previous work exploring the neural correlates of speech comprehension identified a left-dominant pathway in the temporal lobes supporting the extraction of an intelligible linguistic message, whereas the right anterior temporal lobe showed an overall preference for signals clearly conveying dynamic pitch information [Johnsrude, I. S., Penhune, V. B., & Zatorre, R. J. Functional specificity in the right human auditory cortex for perceiving pitch direction. Brain, 123, 155-163, 2000; Scott, S. K., Blank, C. C., Rosen, S., & Wise, R. J. Identification of a pathway for intelligible speech in the left temporal lobe. Brain, 123, 2400-2406, 2000]. The current study combined modulations of overall intelligibility (through vocoding and spectral inversion) with a manipulation of pitch contour (normal vs. falling) to investigate the processing of spoken sentences in functional MRI. Our overall findings replicate and extend those of Scott et al. [Scott, S. K., Blank, C. C., Rosen, S., & Wise, R. J. Identification of a pathway for intelligible speech in the left temporal lobe. Brain, 123, 2400-2406, 2000], where greater sentence intelligibility was predominately associated with increased activity in the left STS, and the greatest response to normal sentence melody was found in right superior temporal gyrus. These data suggest a spatial distinction between brain areas associated with intelligibility and those involved in the processing of dynamic pitch information in speech. By including a set of complexity-matched unintelligible conditions created by spectral inversion, this is additionally the first study reporting a fully factorial exploration of spectrotemporal complexity and spectral inversion as they relate to the neural processing of speech intelligibility. Perhaps

  6. Test-retest effects in treatment studies of reading disability: the devil is in the detail.

    PubMed

    McArthur, Genevieve

    2007-11-01

    Reynolds and Nicolson (Dyslexia, 2007; 13: 78-96) claim to show that the 'dyslexia dyspraxia attention-deficit treatment' (DDAT) benefits children with reading difficulties. However, Rack, Snowling, Hulme, and Gibbs (Dyslexia, 2007; 13: 97-104) argue that because this study did not include an untrained control group then 'all that needs to be postulated to explain the results reported is that children improve their scores on the DST screening tests simply as a result of repeated testing on the same activities' (p. 102). How likely is it that the linguistic gains reported by Reynolds and Nicolson (Dyslexia, 2007; 13: 78-96) are due to test-retest effects? The results of previous exercise- and auditory-based treatment studies that included an untrained control group suggest that test-retest effects explain gains on around 50% of real-word reading tests, 33% of phonological recoding tests, 33% of phonological awareness tests, 17-25% of spoken language tests, and 15% of spelling tests. In addition, longer periods of time between test and retest sessions are associated with test-retest effects on measures of reading but not spoken language. These findings suggest that two of the four linguistic gains reported by Reynolds and Nicolson (Dyslexia, 2007; 13: 78-96) are due to test-retest effects (phonemic segmentation and working memory). The remaining two tests are measures of spoken language and not reading. Hence, the data reported by Reynolds and Nicolson (Dyslexia, 2007; 13: 78-96) are not sufficient to support DDAT as an effective treatment for children with reading difficulties. PMID:17948880

  7. Academic detailing.

    PubMed

    Shankar, P R; Jha, N; Piryani, R M; Bajracharya, O; Shrestha, R; Thapa, H S

    2010-01-01

    There are a number of sources available to prescribers to stay up to date about medicines. Prescribers in rural areas in developing countries however, may not able to access some of them. Interventions to improve prescribing can be educational, managerial, and regulatory or use a mix of strategies. Detailing by the pharmaceutical industry is widespread. Academic detailing (AD) has been classically seen as a form of continuing medical education in which a trained health professional such as a physician or pharmacist visits physicians in their offices to provide evidence-based information. Face-to-face sessions, preferably on an individual basis, clear educational and behavioural objectives, establishing credibility with respect to objectivity, stimulating physician interaction, use of concise graphic educational materials, highlighting key messages, and when possible, providing positive reinforcement of improved practices in follow-up visits can increase success of AD initiatives. AD is common in developed countries and certain examples have been cited in this review. In developing countries the authors have come across reports of AD in Pakistan, Sudan, Argentina and Uruguay, Bihar state in India, Zambia, Cuba, Indonesia and Mexico. AD had a consistent, small but potentially significant impact on prescribing practices. AD has much less resources at its command compared to the efforts by the industry. Steps have to be taken to formally start AD in Nepal and there may be specific hindering factors similar to those in other developing nations. PMID:21209521

  8. Antifreeze (glyco)protein mimetic behavior of poly(vinyl alcohol): detailed structure ice recrystallization inhibition activity study.

    PubMed

    Congdon, Thomas; Notman, Rebecca; Gibson, Matthew I

    2013-05-13

    This manuscript reports a detailed study on the ability of poly(vinyl alcohol) to act as a biomimetic surrogate for antifreeze(glyco)proteins, with a focus on the specific property of ice-recrystallization inhibition (IRI). Despite over 40 years of study, the underlying mechanisms that govern the action of biological antifreezes are still poorly understood, which is in part due to their limited availability and challenging synthesis. Poly(vinyl alcohol) (PVA) has been shown to display remarkable ice recrystallization inhibition activity despite its major structural differences to native antifreeze proteins. Here, controlled radical polymerization is used to synthesize well-defined PVA, which has enabled us to obtain the first quantitative structure-activity relationships, to probe the role of molecular weight and comonomers on IRI activity. Crucially, it was found that IRI activity is "switched on" when the polymer chain length increases from 10 and 20 repeat units. Substitution of the polymer side chains with hydrophilic or hydrophobic units was found to diminish activity. Hydrophobic modifications to the backbone were slightly more tolerated than side chain modifications, which implies an unbroken sequence of hydroxyl units is necessary for activity. These results highlight that, although hydrophobic domains are key components of IRI activity, the random inclusion of addition hydrophobic units does not guarantee an increase in activity and that the actual polymer conformation is important.

  9. Detail isotopic stratigraphy of snowpack - case study from Julian Alps (Slovenia)

    NASA Astrophysics Data System (ADS)

    Vreča, P.; Brenčič, M.; Sinjur, I.; Sokratov, S.

    2012-04-01

    In temperate humid catchments the storage of precipitation in snowpack, and the subsequent melting, both highly variable in space and time, substantially impacts the water cycle. Recent climate warming and changes in atmospheric circulation patterns have resulted in reductions in the duration of the snow cover season, the amount of water stored in the snowpack, as well as a widespread trend toward earlier melt. Comparison of water balance for periods 1961-90 and 1971-2000 showed that in Slovenia average precipitation amount remained the same in both periods while runoff decreased and the evaporation increased recently. The area of Julian Alps (NW Slovenia) represents the upper catchment area of river Sava. The area is locally characterised as one with the highest annual precipitation amount in Europe, rapid runoffs and low evaporation. Snow cover is regular, starts to accumulate in late autumn and lasts more than 100 days, at the upper tree line usually more than 150 days. Due to positive air temperature trend snow cover period is changing and consequently the discharge regime is affected. Spatial and temporal variability of snow, as well as snow cover contribution to the water balance in Julian Alps remains poorly investigated. Isotopes of O and H have been used to study snow deposition and the subsequent alteration of snowpack and its influence on runoff. Despite their potential, environmental isotopes were only rarely used in investigations of water cycle in mountain areas of Slovenia in the past. To improve the knowledge on snowpack isotope characteristics and processes in it, and consequently to enable better understanding of water balance with emphasize on recharge of important Slovene aquifers, in 2011 at selected site in the area of Triglav National Park (Planina Javornik) the first isotope research of snowpack has been started. We performed detail sampling of snowpack at two locations with different canopy structures (e.g. clearing and forest stand

  10. A Detailed Geochemical Study of Island Arc Crust: The Talkeetna Arc Section, South-central Alaska

    NASA Astrophysics Data System (ADS)

    Greene, A. R.; Debari, S. M.; Kelemen, P. B.; Clift, P. D.; Blusztajn, J.

    2002-12-01

    The Talkeetna arc section in south-central Alaska is recognized as the exposed upper mantle and crust of an accreted, Late Triassic to Middle Jurassic island arc. Detailed geochemical studies of layered gabbronorite from the middle and lower crust of this arc and a diverse suite of volcanic and plutonic rocks from the middle and upper crust provide crucial data for understanding arc magma evolution. We also present new data on parental magma compositions for the arc. The deepest level of the arc section consists of residual mantle and ultramafic cumulates adjacent to garnet gabbro and basal gabbronorite interlayered with pyroxenite. The middle crust is primarily layered gabbronorite, ranging from anorthosite to pyroxenite in composition, and is the most widespread plutonic lithology. The upper mid crust is a heterogenous assemblage of dioritic to tonalitic rocks mixed with gabbro and intruded by abundant mafic dikes and chilled pillows. The upper crust of the arc is comprised of volcanic rocks of the Talkeetna Formation ranging from basalt to rhyolite. Most of these volcanic rocks have evolved compositions (<5% MgO, Mg# <60) and overlap the composition of intermediate to felsic plutonic rocks (<3.5% MgO, Mg# <45). However, several chilled mafic rocks and one basalt have primitive characteristics (>8% MgO, Mg# >60). Ion microprobe analyses of clinopyroxene in mid-crustal layered gabbronorites have parallel REE patterns with positive-sloping LREE segments (La/Sm(N)=0.05-0.17; mean 0.11) and flat HREE segments (5-25xchondrite; mean 10xchondrite). Liquids in REE equilibrium with the clinopyroxene in these gabbronorite cumulates were calculated in order to constrain parental magmas. These calculated liquids(La/Sm(N)=0.77-1.83; mean 1.26) all fall within the range of dike and volcanic rock(La/Sm(N)=0.78-2.12; mean 1.23) compositions. However, three lavas out of the 44 we have analyzed show strong HREE depletion, which is not observed in any of the liquid compositions

  11. Experimental Study of Additives on Viscosity biodiesel at Low Temperature

    NASA Astrophysics Data System (ADS)

    Fajar, Berkah; Sukarno

    2015-09-01

    An experimental investigation was performed to find out the viscosity of additive and biodiesel fuel mixture in the temperature range from 283 K to 318 K. Solutions to reduce the viscosity of biodiesel is to add the biodiesel with some additive. The viscosity was measured using a Brookfield Rheometer DV-II. The additives were the generic additive (Diethyl Ether/DDE) and the commercial additive Viscoplex 10-330 CFI. Each biodiesel blends had a concentration of the mixture: 0.0; 0.25; 0.5; 0.75; 1.0; and 1.25% vol. Temperature of biodiesel was controlled from 40°C to 0°C. The viscosity of biodiesel and additive mixture at a constant temperature can be approximated by a polynomial equation and at a constant concentration by exponential equation. The optimum mixture is at 0.75% for diethyl ether and 0.5% for viscoplex.

  12. Additive Manufacturing in Production: A Study Case Applying Technical Requirements

    NASA Astrophysics Data System (ADS)

    Ituarte, Iñigo Flores; Coatanea, Eric; Salmi, Mika; Tuomi, Jukka; Partanen, Jouni

    Additive manufacturing (AM) is expanding the manufacturing capabilities. However, quality of AM produced parts is dependent on a number of machine, geometry and process parameters. The variability of these parameters affects the manufacturing drastically and therefore standardized processes and harmonized methodologies need to be developed to characterize the technology for end use applications and enable the technology for manufacturing. This research proposes a composite methodology integrating Taguchi Design of Experiments, multi-objective optimization and statistical process control, to optimize the manufacturing process and fulfil multiple requirements imposed to an arbitrary geometry. The proposed methodology aims to characterize AM technology depending upon manufacturing process variables as well as to perform a comparative assessment of three AM technologies (Selective Laser Sintering, Laser Stereolithography and Polyjet). Results indicate that only one machine, laser-based Stereolithography, was feasible to fulfil simultaneously macro and micro level geometrical requirements but mechanical properties were not at required level. Future research will study a single AM system at the time to characterize AM machine technical capabilities and stimulate pre-normative initiatives of the technology for end use applications.

  13. The Gas-rich Circumbinary Disk of HR 4049. II. A Detailed Study of the Near-infrared Spectrum

    NASA Astrophysics Data System (ADS)

    Malek, S. E.; Cami, J.

    2014-10-01

    HR 4049 is a peculiar evolved binary surrounded by a circumbinary disk. Mid-infrared observations show that the disk is rich in molecular gas and radially extended. To study the properties of this disk, we re-analyzed a set of near-infrared observations at high spectral resolution obtained with Gemini-Phoenix. These data cover absorption lines originating from the first overtone of CO and from H2O in the 2.3 μm region as well as more complex emission-absorption profiles from H2O and the fundamental mode of CO near 4.6 μm. By using an excitation diagram and from modeling the spectrum, we find that most of the CO overtone and H2O absorption originates from hot gas (T ex ≈ 1000 K) with high column densities, consistent with the mid-infrared data. The strong emission in the wavelength range of the CO fundamental furthermore suggests that there is a significant quantity of gas in the inner cavity of the disk. In addition, there is a much colder component in the line of sight to the disk. A detailed analysis of the overtone line profiles reveals variations in the line widths that are consistent with a radially extended disk in Keplerian rotation with hotter gas closer to the central star. We estimate the mass of the primary to be ~0.34 M ⊙ and discuss the implications for its evolutionary status.

  14. Superficial Type of Multiple Basal Cell Carcinomas: Detailed Comparative Study of Its Dermoscopic and Histopathological Findings

    PubMed Central

    Hirofuji, Akiko; Takiguchi, Kojiro; Nakamura, Koichiro; Kuramochi, Akira; Tsuchida, Tetsuya; Arai, Eiichi; Shimizu, Michio

    2011-01-01

    We investigated in detail the dermoscopic and histopathological findings in a case of a superficial type of multiple basal cell carcinomas (BCCs). These multiple lesions (occurring in the chest, neck, and back) showed three different findings, respectively. Dermoscopy of the erythematous and brown-colored patch on the anterior chest showed spoke wheel areas, and the histopathological cross-section revealed vertical spoke wheel structures. In the black- and brown-colored patch at the neck, the dermatoscopy showed a maple leaf-like structure, which was in accordance with the strengthening of the histological lateral connection of the lesion. The brown-colored patch of the lateral back histologically showed irregularly enlarged spoke wheel-like areas with peripheral increased melanin pigments, which correlated with the dark black color of dermoscopic maple leaf-like areas. The vertical spoke wheel areas by dermatoscopy revealed a horizontal spoke wheel structure by histopathology. PMID:21151508

  15. A detailed experimental study of n-propylcyclohexane autoignition in lean conditions

    SciTech Connect

    Crochet, M.; Minetti, R.; Ribaucour, M.; Vanhove, G.

    2010-11-15

    The autoignition chemistry of lean n-propylcyclohexane/''air'' mixtures ({phi} = 0.3, 0.4, 0.5) was investigated in a rapid compression machine at compressed gas temperatures ranging from 620 to 930 K and pressures ranging from 0.45 to 1.34 MPa. Cool flame and ignition delay times were measured. Cool flame delay times were found to follow an Arrhenius behavior, and a correlation including pressure and equivalence ratio dependences was deduced. The present ignition delay data were compared with recent experimental results and simulations from the available thermokinetic models in the literature. Negative temperature coefficient zones were observed when plotting ignition delay times versus compressed gas temperature. The oxidation products were identified and quantified during the ignition delay period. Formation pathways for the C{sub 9} bicyclic ethers and conjugate alkenes are proposed. The experimental data provide an extensive database to test detailed thermokinetic oxidation models. (author)

  16. NEW EMPLOYEE ON THE JOB - ROBERT E POST - STUDYING CONSTRUCTION DETAILS OF A GENERAL ELECTRIC GE ION

    NASA Technical Reports Server (NTRS)

    1963-01-01

    NEW EMPLOYEE ON THE JOB - ROBERT E POST - STUDYING CONSTRUCTION DETAILS OF A GENERAL ELECTRIC GE ION EXCHANGE MEMBRANE FUEL CELL - THIS IS ONE OF SEVERAL TYPES OF FUEL CELLS BEING STUDIED AT NASA LEWIS RESEARCH CENTER FOR SUITABILITY FOR USE IN THE

  17. Health studies indicate MTBE is safe gasoline additive

    SciTech Connect

    Anderson, E.V.

    1993-09-01

    Implementation of the oxygenated fuels program by EPA in 39 metropolitan areas, including Fairbanks and Anchorage, Alaska, in the winter of 1992, encountered some unexpected difficulties. Complaints of headaches, dizziness, nausea, and irritated eyes started in Fairbanks, jumped to Anchorage, and popped up in various locations in the lower 48 states. The suspected culprit behind these complaints was the main additive for oxygenation of gasoline is methyl tert-butyl ether (MTBE). A test program, hastily organized in response to these complaints, has indicated that MTBE is a safe gasoline additive. However, official certification of the safety of MTBE is still awaited.

  18. A detailed kinetic modeling study of toluene oxidation in a premixed laminar flame

    SciTech Connect

    Tian, Z; Pitz, W J; Fournet, R; Glaude, P; Battin-Leclerc, F

    2009-12-18

    An improved chemical kinetic model for the toluene oxidation based on experimental data obtained in a premixed laminar low-pressure flame with vacuum ultraviolet (VUV) photoionization and molecular beam mass spectrometry (MBMS) techniques has been proposed. The present mechanism consists of 273 species up to chrysene and 1740 reactions. The rate constants of reactions of toluene, decomposition, reaction with oxygen, ipso-additions and metatheses with abstraction of phenylic H-atom are updated; new pathways of C{sub 4} + C{sub 2} species giving benzene and fulvene are added. Based on the experimental observations, combustion intermediates such as fulvenallene, naphtol, methylnaphthalene, acenaphthylene, 2-ethynylnaphthalene, phenanthrene, anthracene, 1-methylphenanthrene, pyrene and chrysene are involved in the present mechanism. The final toluene model leads to an overall satisfactory agreement between the experimentally observed and predicted mole fraction profiles for the major products and most combustion intermediates. The toluene depletion is governed by metathese giving benzyl radicals, ipso-addition forming benzene and metatheses leading to C{sub 6}H{sub 4}CH{sub 3} radicals. A sensitivity analysis indicates that the unimolecular decomposition via the cleavage of a C-H bond has a strong inhibiting effect, while decomposition via C-C bond breaking, ipso-addition of H-atom to toluene, decomposition of benzyl radicals and reactions related to C{sub 6}H{sub 4}CH{sub 3} radicals have promoting effect for the consumption of toluene. Moreover, flow rate analysis is performed to illustrate the formation pathways of mono- and polycyclic aromatics.

  19. Hydrothermal alteration in oceanic ridge volcanics: A detailed study at the Galapagos Fossil Hydrothermal Field

    USGS Publications Warehouse

    Ridley, W.I.; Perfit, M.R.; Josnasson, I.R.; Smith, M.F.

    1994-01-01

    The Galapagos Fossil Hydrothermal Field is composed of altered oceanic crust and extinct hydrothermal vents within the eastern Galapagos Rift between 85??49???W and 85??55???W. The discharge zone of the hydrothermal system is revealed along scarps, thus providing an opportunity to examine the uppermost mineralized, and highly altered interior parts of the crust. Altered rocks collected in situ by the submersible ALVIN show complex concentric alteration zones. Microsamples of individual zones have been analysed for major/minor, trace elements, and strontium isotopes in order to describe the complex compositional details of the hydrothermal alteration. Interlayered chlorite-smectite and chlorite with disequilibrium compositions dominate the secondary mineralogy as replacement phases of primary glass and acicular pyroxene. Phenocrysts and matrix grains of plagioclase are unaffected during alteration. Using a modification of the Gresens' equation we demonstrate that the trivalent rare earth elements (REEs) are relatively immobile, and calculate degrees of enrichment and depletion in other elements. Strontium isotopic ratios increase as Sr concentrations decrease from least-altered cores to most-altered rims and cross-cutting veins in individual samples, and can be modeled by open system behaviour under low fluid-rock ratio (< 10) conditions following a period of lower-temperature weathering of volcanics within the rift zone. The complex patterns of element enrichment and depletion and strontium isotope variations indicate mixing between pristine seawater and ascending hot fluids to produce a compositional spectrum of fluids. The precipitation of base-metal sulfides beneath the seafloor is probably a result of fluid mixing and cooling. If, as suggested here, the discharge zone alteration occurred under relatively low fluid-rock ratios, then this shallow region must play an important role in determining the exit composition of vent fluids in marine hydrothermal systems

  20. Hydrothermal alteration in oceanic ridge volcanics: A detailed study at the Galapagos Fossil Hydrothermal Field

    SciTech Connect

    Ridley, W.I.; Perfit, M.R.; Smith, M.F.; Jonasson, I.R.

    1994-06-01

    The Galapagos Fossil Hydrothermal Field is composed of altered oceanic crust and extinct hydrothermal vents within the eastern Galapagos Rift between 85{degree}49 feet W and 85{degree} 55 feet W. The discharge zone of the hydrothermal system is revealed along scarps, thus providing an opportunity to examine the uppermost mineralized, and highly altered interior parts of the crust. Altered rocks collected in situ by the submersible ALVIN show complex concentric alteration zones. Microsamples of individual zones have been analysed for major/minor, trace elements, and strontium isotopes in order to describe the complex compositional details of the hydrothermal alteration. Interlayered chlorite-smectite and chlorite with disequilibrium compositions dominate the secondary mineralogy as replacement phases of primary glass and acicular pyroxene. Phenocrysts and matrix grains of plagioclase are unaffected during alteration. Using a modification of the Gresens` equation we demonstrate that the trivalent rare earth elements (REEs) are relatively immobile, and calculate degrees of enrichment and depletion in other elements. Strontium isotopic ratios increase as Sr concentrations decrease from least-altered cores to most-altered rims and cross-cutting veins in individual samples, and can be modeled by open system behaviour under low fluid-rock ratio (<10) conditions following a period of lower-temperature weathering of volcanics within the rift zone. The complex patterns of element enrichment and depletion and strontium isotope variations indicate mixing between pristine seawater and ascending hot fluids to produce a compositional spectrum of fluids. If, as suggested here, the discharge zone alteration occurred under relatively low fluid-rock ratios, then this shallow region must play an important role in determining the exit composition of vent fluids in marine hydrothermal systems. 50 refs., 10 figs., 4 tabs.

  1. Detailed study of the nuclear dependence of the EMC effect and short-range correlations

    SciTech Connect

    Arrington, J.; Daniel, A.; Day, D. B.; Fomin, N.; Gaskell, D.; Solvignon, P.

    2012-12-01

    Background: The density of the nucleus has been important in explaining the nuclear dependence of the quark distributions, also known as the EMC effect, as well as the presence of high-momentum nucleons arising from short-range correlations (SRCs). Recent measurements of both of these effects on light nuclei have shown a clear deviation from simple density-dependent models. Purpose: A better understanding of the nuclear quark distributions and short-range correlations requires a careful examination of the experimental data on these effects to constrain models that attempt to describe these phenomena. Methods: We present a detailed analysis of the nuclear dependence of the EMC effect and the contribution of SRCs in nuclei, comparing to predictions and simple scaling models based on different pictures of the underlying physics. We also make a direct, quantitative comparison of the two effects to further examine the connection between these two observables related to nuclear structure. Results: We find that, with the inclusion of the new data on light nuclei, neither of these observables can be well explained by common assumptions for the nuclear dependence. The anomalous behavior of both effects in light nuclei is consistent with the idea that the EMC effect is driven by either the presence of high-density configurations in nuclei or the large virtuality of the high-momentum nucleons associated with these configurations. Conclusions: The unexpected nuclear dependence in the measurements of the EMC effect and SRC contributions appear to suggest that the local environment of the struck nucleon is the most relevant quantity for explaining these results. The common behavior suggests a connection between the two seemingly disparate phenomena, but the data do not yet allow for a clear preference between models which aim to explain this connection.

  2. A high temperature and atmospheric pressure experimental and detailed chemical kinetic modelling study of 2-methyl furan oxidation

    PubMed Central

    Somers, Kieran P.; Simmie, John M.; Gillespie, Fiona; Burke, Ultan; Connolly, Jessica; Metcalfe, Wayne K.; Battin-Leclerc, Frédérique; Dirrenberger, Patricia; Herbinet, Olivier; Glaude, Pierre-Alexandre; Curran, Henry J.

    2013-01-01

    An experimental ignition delay time study for the promising biofuel 2-methyl furan (2MF) was performed at equivalence ratios of 0.5, 1.0 and 2.0 for mixtures of 1% fuel in argon in the temperature range 1200–1800 K at atmospheric pressure. Laminar burning velocities were determined using the heat-flux method for mixtures of 2MF in air at equivalence ratios of 0.55–1.65, initial temperatures of 298–398 K and atmospheric pressure. A detailed chemical kinetic mechanism consisting of 2059 reactions and 391 species has been constructed to describe the oxidation of 2MF and is used to simulate experiment. Accurate reproduction of the experimental data has been obtained over all conditions with the developed mechanism. Rate of production and sensitivity analyses have been carried out to identify important consumption pathways of the fuel and key kinetic parameters under these conditions. The reactions of hydrogen atom with the fuel are highlighted as important under all experimental conditions studied, with abstraction by the hydrogen atom promoting reactivity and hydrogen atom addition to the furan ring inhibiting reactivity. This work, to the authors knowledge, is the first to combine theoretical and experimental work to describe the oxidation of any of the alkylated furans. The mechanism developed herein to describe 2MF combustion should also function as a sub-mechanism to describe the oxidation of 2,5-dimethyl furan whilst also providing key insights into the oxidation of this similar biofuel candidate. PMID:23814505

  3. A study of detailed dosimetry records for a selected group of workers included in the Hanford mortality study

    SciTech Connect

    Gilbert, E.S.

    1990-09-01

    Detailed dosimetry data from microfiche and microfilm in source records for the years 1944--1978 for 139 Hanford workers were examined. Information on these records was compared with computerized dose equivalent estimates used in mortality analyses. Because of difficulties in reading some early source records, and because of variation in the format of records and in algorithms for calculating whole body dose, this validation was difficult. However, apparent discrepancies in cumulative dose were less than 0.1 rem for 88% of the workers in this study, never exceeded 1.5 rem, and would be unlikely to distort conclusions of dose-response analyses. Most discrepancies occurred in early years of Hanford operations, especially 1944--46, with very few problems with dose estimates from the 1960's and 1970's. The study also provided data dosimetry practices, by calendar year, on frequency of monitoring, the number and proportion of dosimeters yielding positive results, and the magnitude of doses recorded for individual dosimeters. 7 refs., 5 figs., 13 tabs.

  4. NASA TLA workload analysis support. Volume 1: Detailed task scenarios for general aviation and metering and spacing studies

    NASA Technical Reports Server (NTRS)

    Sundstrom, J. L.

    1980-01-01

    The techniques required to produce and validate six detailed task timeline scenarios for crew workload studies are described. Specific emphasis is given to: general aviation single pilot instrument flight rules operations in a high density traffic area; fixed path metering and spacing operations; and comparative workload operation between the forward and aft-flight decks of the NASA terminal control vehicle. The validation efforts also provide a cursory examination of the resultant demand workload based on the operating procedures depicted in the detailed task scenarios.

  5. Kinetic study of additions of dialkylmagnesium compounds to a cycloprene

    SciTech Connect

    Watkins, E.K.; Richey, H.G. Jr.

    1992-11-01

    Reaction of Et{sub 2}Mg and spiro[2.4]hept-1-ene (1) in tetahydrofuran followed by hydrolysis furnishes mainly 1-ethylspiro[2.4]heptane (3); when hydrolysis is with D{sub 2}O, {ge}98% of this (Z)-1-ethylspirol[2.4]heptane-2-d (4). Some metalation of 1 and formation of higher molecular weight products incorporating two or three molecules of 1 also take place. Formation of 3 is first order in 1 and in Et{sub 2}Mg, and at 35.47{degrees}C the rate constant is 1.2 x 10{sup -5} L M{sup -1}s{sup -1}. Under the same conditions, the rate of addition (1.5 x 10{sup -5} L M{sup -1}{sub s}{sup -1}). Under the same conditions, the rate of addition (1.5 x 10{sup -5} L mol{sup -1} {sub s}{sup -1}) of the Grignard reagent prepared from EtBr is similar. Reactions of 1 with Me{sub 2}Mg, I-Pr{sub 2}Mg, and t-Bu{sub 2}Mg. Added Fe(acac){sub 3} increases the rate of formation of 3 from reactions of 1 with either Et{sub 2}Mg or the Grignard reagent prepared from EtBr, but additional products also are formed. 55 refs., 2 tabs.

  6. The gas-rich circumbinary disk of HR 4049. II. A detailed study of the near-infrared spectrum

    SciTech Connect

    Malek, S. E.; Cami, J. E-mail: jcami@uwo.ca

    2014-10-20

    HR 4049 is a peculiar evolved binary surrounded by a circumbinary disk. Mid-infrared observations show that the disk is rich in molecular gas and radially extended. To study the properties of this disk, we re-analyzed a set of near-infrared observations at high spectral resolution obtained with Gemini-Phoenix. These data cover absorption lines originating from the first overtone of CO and from H{sub 2}O in the 2.3 μm region as well as more complex emission-absorption profiles from H{sub 2}O and the fundamental mode of CO near 4.6 μm. By using an excitation diagram and from modeling the spectrum, we find that most of the CO overtone and H{sub 2}O absorption originates from hot gas (T {sub ex} ≈ 1000 K) with high column densities, consistent with the mid-infrared data. The strong emission in the wavelength range of the CO fundamental furthermore suggests that there is a significant quantity of gas in the inner cavity of the disk. In addition, there is a much colder component in the line of sight to the disk. A detailed analysis of the overtone line profiles reveals variations in the line widths that are consistent with a radially extended disk in Keplerian rotation with hotter gas closer to the central star. We estimate the mass of the primary to be ∼0.34 M {sub ☉} and discuss the implications for its evolutionary status.

  7. A comprehensive experimental and detailed chemical kinetic modelling study of 2,5-dimethylfuran pyrolysis and oxidation

    PubMed Central

    Somers, Kieran P.; Simmie, John M.; Gillespie, Fiona; Conroy, Christine; Black, Gráinne; Metcalfe, Wayne K.; Battin-Leclerc, Frédérique; Dirrenberger, Patricia; Herbinet, Olivier; Glaude, Pierre-Alexandre; Dagaut, Philippe; Togbé, Casimir; Yasunaga, Kenji; Fernandes, Ravi X.; Lee, Changyoul; Tripathi, Rupali; Curran, Henry J.

    2013-01-01

    unexplored intermediate temperature combustion pathways of 25DMF. Hydroxyl radical addition to the furan ring is highlighted as an important fuel consuming reaction, leading to the formation of methyl vinyl ketone and acetyl radical. The chemically activated recombination of HȮ2 or CH3Ȯ2 with the 5-methyl-2-furanylmethyl radical, forming a 5-methyl-2-furylmethanoxy radical and ȮH or CH3Ȯ radical is also found to exhibit significant control over ignition delay times, as well as being important reactions in the prediction of species profiles in a JSR. Kinetics for the abstraction of a hydrogen atom from the alkyl side-chain of the fuel by molecular oxygen and HȮ2 radical are found to be sensitive in the estimation of ignition delay times for fuel-air mixtures from temperatures of 820–1200 K. At intermediate temperatures, the resonantly stabilised 5-methyl-2-furanylmethyl radical is found to predominantly undergo bimolecular reactions, and as a result sub-mechanisms for 5-methyl-2-formylfuran and 5-methyl-2-ethylfuran, and their derivatives, have also been developed with consumption pathways proposed. This study is the first to attempt to simulate the combustion of these species in any detail, although future refinements are likely necessary. The current study illustrates both quantitatively and qualitatively the complex chemical behavior of what is a high potential biofuel. Whilst the current work is the most comprehensive study on the oxidation of 25DMF in the literature to date, the mechanism cannot accurately reproduce laminar burning velocity measurements over a suitable range of unburnt gas temperatures, pressures and equivalence ratios, although discrepancies in the experimental literature data are highlighted. Resolving this issue should remain a focus of future work. PMID:24273333

  8. Functionalized gold nanoparticles: a detailed in vivo multimodal microscopic brain distribution study

    NASA Astrophysics Data System (ADS)

    Sousa, Fernanda; Mandal, Subhra; Garrovo, Chiara; Astolfo, Alberto; Bonifacio, Alois; Latawiec, Diane; Menk, Ralf Hendrik; Arfelli, Fulvia; Huewel, Sabine; Legname, Giuseppe; Galla, Hans-Joachim; Krol, Silke

    2010-12-01

    In the present study, the in vivo distribution of polyelectrolyte multilayer coated gold nanoparticles is shown, starting from the living animal down to cellular level. The coating was designed with functional moieties to serve as a potential nano drug for prion disease. With near infrared time-domain imaging we followed the biodistribution in mice up to 7 days after intravenous injection of the nanoparticles. The peak concentration in the head of mice was detected between 19 and 24 h. The precise particle distribution in the brain was studied ex vivo by X-ray microtomography, confocal laser and fluorescence microscopy. We found that the particles mainly accumulate in the hippocampus, thalamus, hypothalamus, and the cerebral cortex.In the present study, the in vivo distribution of polyelectrolyte multilayer coated gold nanoparticles is shown, starting from the living animal down to cellular level. The coating was designed with functional moieties to serve as a potential nano drug for prion disease. With near infrared time-domain imaging we followed the biodistribution in mice up to 7 days after intravenous injection of the nanoparticles. The peak concentration in the head of mice was detected between 19 and 24 h. The precise particle distribution in the brain was studied ex vivo by X-ray microtomography, confocal laser and fluorescence microscopy. We found that the particles mainly accumulate in the hippocampus, thalamus, hypothalamus, and the cerebral cortex. Electronic supplementary information (ESI) available: Fig. S1-S6. See DOI: 10.1039/c0nr00345j

  9. Test-Retest Effects in Treatment Studies of Reading Disability: The Devil Is in the Detail

    ERIC Educational Resources Information Center

    McArthur, Genevieve

    2007-01-01

    Reynolds and Nicolson ("Dyslexia," 2007; 13: 78-96) claim to show that the "dyslexia dyspraxia attention-deficit treatment" (DDAT) benefits children with reading difficulties. However, Rack, Snowling, Hulme, and Gibbs ("Dyslexia," 2007; 13: 97-104) argue that because this study did not include an untrained control group then "all that needs to be…

  10. Detailed studies of Minor Actinide transmutation-incineration in high-intensity neutron fluxes

    SciTech Connect

    Bringer, O.; Blandin, C.; Oriol, L.

    2006-07-01

    The Mini-INCA project is dedicated to the measurement of incineration-transmutation chains and potentials of minor actinides in high-intensity thermal neutron fluxes. In this context, new types of detectors and methods of analysis have been developed. The {sup 241}Am and {sup 232}Th transmutation-incineration chains have been studied and several capture and fission cross sections measured very precisely, showing some discrepancies with existing data or evaluated data. An impact study was made on different based-like GEN-IV reactors. It underlines the necessity to proceed to precise measurements for a large number of minor-actinides that contribute to these future incineration scenarios. (authors)

  11. Mantle Inputs to the Subduction Factory: Detailed Studies of the Southern Mariana Seamount Province

    NASA Astrophysics Data System (ADS)

    Bloomer, S. H.; Stern, R. J.

    2001-12-01

    The southern Mariana Arc system has been studied intensively, with a focus on volcanoes along the magmatic arc and associated cross-chains. Sonar back-scatter imagery of about 50,000 square kilometers imaged 28 submarine volcanoes of the Mariana arc system that had not been previously studied. We also imaged the spreading axis of the Mariana Trough from 13o45' to 17 o 30', about half the length of this slow-spreading ridge. Our survey of 450 km along the arc magmatic axis, from 13 o 30'N to 17 o 20'N, indicates that these volcanoes vary widely in volume, from a third to 1000 km3. The average volcano from along the Mariana magmatic front is spaced 20km from its neighbor, is built on a platform that lies at 1800m below sealevel, rises 1000m above this platform, and occupies a volume of about 200 cubic kilometers. Lavas collected from 24 edifices along the magmatic front include abundant basalt and dacite; we also collected several cumulate gabbroic xenoliths. Phenocryst phases are dominated by plagioclase, olivine, pyroxene, and hornblende. Five of the volcanoes in the study area - the islands of Guguan, Sarigan, and Anatahan, and the submarine edifices of S. Ruby and Esmeralda -are active. Other volcanoes are extinct, and our study shows that, to a first approximation, the smaller the edifice, the less likely it is to be active. Some extinct edifices have flat summits at depths that range from 40 to 300 m which are capped with coral, or, farther north in the study area, shelly material or carbonate sand. A major cross-chain of small volcanoes along 14 o 40'N was studied and sampled for the first time. These volcanoes yielded a range of lavas, from basalt to dacite. Volcanoes from another cross-chain, extending along 17 o 20'N latitude west of Guguan, yielded only basalt. Shorter cross-chains were also studied in the Diamantes and near Sarigan. We recovered abundant pumice from 6 volcanoes in the northernmost 100km of the arc and one volcano in the south. Each

  12. Outcomes for depression and anxiety in primary care and details of treatment: a naturalistic longitudinal study

    PubMed Central

    2011-01-01

    Background There is little evidence as to whether or not guideline concordant care in general practice results in better clinical outcomes for people with anxiety and depression. This study aims to determine possible associations between guideline concordant care and clinical outcomes in general practice patients with depression and anxiety, and identify patient and treatment characteristics associated with clinical improvement. Methods This study forms part of the Netherlands Study of Depression and Anxiety (NESDA). Adult patients, recruited in general practice (67 GPs), were interviewed to assess DSM-IV diagnoses during baseline assessment of NESDA, and also completed questionnaires measuring symptom severity, received care, socio-demographic variables and social support both at baseline and 12 months later. The definition of guideline adherence was based on an algorithm on care received. Information on guideline adherence was obtained from GP medical records. Results 721 patients with a current (6-month recency) anxiety or depressive disorder participated. While patients who received guideline concordant care (N = 281) suffered from more severe symptoms than patients who received non-guideline concordant care (N = 440), both groups showed equal improvement in their depressive or anxiety symptoms after 12 months. Patients who (still) had moderate or severe symptoms at follow-up, were more often unemployed, had smaller personal networks and more severe depressive symptoms at baseline than patients with mild symptoms at follow-up. The particular type of treatment followed made no difference to clinical outcomes. Conclusion The added value of guideline concordant care could not be demonstrated in this study. Symptom severity, employment status, social support and comorbidity of anxiety and depression all play a role in poor clinical outcomes. PMID:22099636

  13. On the nature of sn stars. I. A detailed abundance study

    NASA Astrophysics Data System (ADS)

    Saffe, C.; Levato, H.

    2014-02-01

    The sn stars were first discoved by Abt & Levato when studying the spectral types in different open clusters. These stars present sharp Balmer lines, sharp metallic lines (C II, Si II, Ca II, Ti II, Fe II), and broad coreless He I lines. Some of the sn stars seem to be related to CP stars. Initially Abt & Levato proposed a shell-like nature to explain the sn stars, although this scenario was subsequently questioned. There is no general agreement about their origin. We aim to derive abundances for a sample of 9 stars, including sn and non-sn stars, to determine the possible relation between sn and CP stars and compare their chemical abundances. That most sn stars belong to open clusters allows us to search for a possible relation with fundamental parameters, including the age and rotation. We also study the possible contribution of different effects to the broad He I lines observed in these stars, such as Stark broadening and the possible He-stratification. Effective temperature and gravity were estimated by Strömgren photometry and then refined by requiring ionization and excitation equilibrium of Fe lines. We derived the abundances by fitting the observed spectra with synthetic spectra using an iterative procedure with the SYNTHE and ATLAS9 codes. We derived metallic abundances of 23 different chemical elements for 9 stars and obtained low projected rotational velocities for the sn stars in our sample (vsini up to 69 km s-1). We also compared 5 stars that belong to the same cluster (NGC 6475) and show that the sn characteristics appear in the 3 stars with the lower rotational velocity. However, the apparent preference of sn stars for objects with the lower vsini values should be taken with caution due to the small number of objects studied here. We analysed the photospheric chemical composition of sn stars and show that approximately ~40% of them display chemical peculiarities (such as He-weak and HgMn stars) within a range of temperature of 10 300 K-14 500 K

  14. Recent changes in vegetation, hydrotopography and peat accumulation in detailed case studies of northern aapa mires

    NASA Astrophysics Data System (ADS)

    Tahvanainen, Teemu; Kumpula, Timo; Tolonen, Kimmo

    2016-04-01

    Aapa mires are northern mire complexes with typical patterned central fen areas and relatively thin peat layers. In principle, aapa mires could develop into raised bogs either 1) through autogenic succession, given enough time for peat accumulation or 2) through allogenic mechanism triggered by hydrological change. Climate change models predict that the climatic envelop of aapa mires will move north and, indeed, that hydrology may change sufficiently to cause allogenic change pressure. Potential resilience or pace of ecosystem-scale responses are poorly understood, however, in the case of aapa mires. We studied recent (ca. 60 years) changes in vegetation, hydrotopography and peat accumulation of two aapa mires at their southern limit of distribution in eastern Finland. We used repeated sampling after 60 years combined with peat stratigraphy and time-series of aerial images in a multi-proxy approach. The study site at the Valkeasuo mire was affected by extensive drainage activities in its catchment, while the aapa mire area itself was not drained. This resulted in the loss of minerotrophic hydrology that lead to rapid changes over the whole patterned fen area. Wet minerotrophic sedge fen vegetation was almost totally covered by ombrotrophic Sphagnum mosses within few decades. Even up to 50 cm high hummocks emerged on the patterned fen strings in an abrupt response that could be precisely dated by simultaneous encroachment of pine seedlings and from the aerial images. The recent apparent rate of carbon accumulation of the new Sphagnum peat was ca. 100 g m-2 -a. The other study site in the Ilajansuo aapa mire persists in a more pristine setting without significant disturbance in its catchment area. Here the mineral-water limit was studied across a transition between a bog zone and an aapa mire zone of the mire complex. We were able to exactly locate a 100 x 300-m special study area and repeat e.g. mapping of all trees, of all topographic patterns (hummocks, hollows

  15. Detailed studies of selected, well-exposed fracture zones in the Adirondack Mountains dome, New York

    SciTech Connect

    Wiener, R.W.; Isachsen, Y.W.

    1987-01-01

    The Adirondack Mountains constitute a relatively young (Mesozoic, Cenozoic) dome on the craton. The dome is undergoing contemporary uplift, based on geodetic releveling, and is seismically active. The breached dome provides a very large window through Paleozoic cover and thus permits ground study of the fracture systems that characterize the seismogenic basement and influence the patterns of brittle deformation that are found in overlying Paleozoic rocks of the platform. The predominant fracture zones are linear valleys that trend NNE to NE, parallel to the long axis of the dome. The 36 field studies of the lineament segments discussed in this report suggest that the prominent NE to NNE fracture systems in the eastern Adirondacks are dominantly high angle faults down-stepped to the east, whereas those in the central Adirondacks are dominantly zero-displacement crackle zones. The origin of these features is related to the rapid uplift of the Adirondack dome. Similar features can be expected to be found in other areas of domal uplift or rapid regional uplift.

  16. Nonadiabatic simulation study of photoisomerization of azobenzene: Detailed mechanism and load-resisting capacity

    SciTech Connect

    Shao Junfeng; Lei Yibo; Wen Zhenyi; Dou Yusheng; Wang Zhisong

    2008-10-28

    Nonadiabatic dynamical simulations were carried out to study cis-to-trans isomerization of azobenzene under laser irradiation and/or external mechanical loads. We used a semiclassical electron-radiation-ion dynamics method that is able to describe the coevolution of the structural dynamics and the underlying electronic dynamics in a real-time manner. It is found that azobenzene photoisomerization occurs predominantly by an out-of-plane rotation mechanism even under a nontrivial resisting force of several tens of piconewtons. We have repeated the simulations systematically for a broad range of parameters for laser pulses, but could not find any photoisomerization event by a previously suggested in-plane inversion mechanism. The simulations found that the photoisomerization process can be held back by an external resisting force of 90-200 pN depending on the frequency and intensity of the lasers. This study also found that a pure mechanical isomerization is possible from the cis-to-trans state if the azobenzene molecule is stretched by an external force of {approx}1250-1650 pN. Remarkably, the mechanical isomerization first proceeds through a mechanically activated inversion, and then is diverted to an ultrafast downhill rotation that accomplishes the isomerization. Implications of these findings to azobenzene-based nanomechanical devices are discussed.

  17. Detailed Study of Seismic Wave Attenuation in Carbonate Rocks: Application on Abu Dhabi Oil Fields

    NASA Astrophysics Data System (ADS)

    Bouchaala, F.; Ali, M. Y.; Matsushima, J.

    2015-12-01

    Seismic wave attenuation is a promising attribute for the petroleum exploration, thanks to its high sensitivity to physical properties of subsurface. It can be used to enhance the seismic imaging and improve the geophysical interpretation which is crucial for reservoir characterization. However getting an accurate attenuation profile is not an easy task, this is due to complex mechanism of this parameter, although that many studies were carried out to understand it. The degree of difficulty increases for the media composed of carbonate rocks, known to be highly heterogeneous and with complex lithology. That is why few attenuation studies were done successfully in carbonate rocks. The main objectives of this study are, Getting an accurate and high resolution attenuation profiles from several oil fields. The resolution is very important target for us, because many reservoirs in Abu Dhabi oil fields are tight.Separation between different modes of wave attenuation (scattering and intrinsic attenuations).Correlation between the attenuation profiles and other logs (Porosity, resistivity, oil saturation…), in order to establish a relationship which can be used to detect the reservoir properties from the attenuation profiles.Comparison of attenuation estimated from VSP and sonic waveforms. Provide spatial distribution of attenuation in Abu Dhabi oil fields.To reach these objectives we implemented a robust processing flow and new methodology to estimate the attenuation from the downgoing waves of the compressional VSP data and waveforms acquired from several wells drilled in Abu Dhabi. The subsurface geology of this area is primarily composed of carbonate rocks and it is known to be highly fractured which complicates more the situation, then we separated successfully the intrinsic attenuation from the scattering. The results show that the scattering is significant and cannot be ignored. We found also a very interesting correlation between the attenuation profiles and the

  18. Hydrophobizing coatings for cultural heritage. A detailed study of resin/stone surface interaction

    NASA Astrophysics Data System (ADS)

    Fermo, P.; Cappelletti, G.; Cozzi, N.; Padeletti, G.; Kaciulis, S.; Brucale, M.; Merlini, M.

    2014-07-01

    Conservation of historical buildings is an important issue and the environmental conditions seriously affect the monument's stones. The protection of cultural heritage buildings and monuments by surface treatment with polymers is a common practice due to their ability to form a protective layer on the monument's surface as well as to control the transport of different fluids from the surface to the monument's interior. In this work, three different substrates were used: Carrara marble, Botticino limestone, and Angera stone. A commercially available Si-based resin (Alpha®SI30) was used as protective agent to improve the hydrophobicity features of the different tested materials. The surface properties of the coating and the relative interaction with the adopted stones were studied using different techniques such as contact angle measurements, electron microscope coupled with an energy dispersive spectrometer, X-ray photoelectron spectroscopy, atomic force microscopy, and attenuated total reflection infrared spectroscopy.

  19. A detailed rock-magnetic and archeomagnetic study of lime-plasters from central Mexico

    NASA Astrophysics Data System (ADS)

    Soler-Arechalde, A. M.; Rodriguez, M.; Ramirez, O.; Gogichaishvili, A.; Caballero-Miranda, C.; Hueda-Tanabe, Y.; Urrutia-Fucugauchi, J.

    2003-04-01

    We carried out a reconnaissance rock-magnetic and archeomagnetic investigations of lime-plasters at some most important pre-Hispanic sites in Central Mexico. Both burned and unburned lime plasters (in total 30 samples) were analyzed from Teotihuacan, Tlatelolco, Santa Cruz Atizapan and Pañhu. The characteristic directions determined in this study are considered to be of primary origin. Thermomagnetic investigation show that the remanence is carried in most cases by magnetite or Ti-poor titanomagnetite. Unblocking temperature spectra and relatively high coercivity point to 'small' pseudo-single domain magnetic structure grains as responsible for remanent magnetization. Single-component, linear demagnetization plots were observed in most of cases. The mean site directions are consistent with the available reference master curve for Mesoamerica.

  20. A Detailed Closure Study of CCN in the Northeastern United States

    NASA Astrophysics Data System (ADS)

    Medina, J.; Nenes, A.; Cottrell, L.; Griffin, R.

    2005-12-01

    Ground measurements of cloud condensation nuclei (CCN) were made during July and August of 2004 as part of the NEAQS ITCT-2K4 (New England Air Quality Study - Intercontinental Transport and Chemical Transformation 2004) mission at the Thompson Farm sampling site maintained by the University of New Hampshire. Two continuous-flow streamwise thermal gradient CCN instruments (built by Droplet Measurement Technologies, Inc.) were used for the measurements. The first instrument operated counted CCN concentrations of ambient sample air, while the second counted CCN concentrations of sample air, first classified by a differential mobility analyzer. The supersaturation spectra included 5 settings that ranged from 0.2% to 0.6% every 5 minutes each. To further constrain the measurements, chemical composition of the aerosol was obtained from an Aerodyne Aerosol Mass Spectrometer. By combining both measurements together, the CCN mixing state, as well as insight into the chemical composition and closure can be assessed.

  1. Detailed study of four-wave mixing in Raman DFB fiber lasers.

    PubMed

    Shi, Jindan; Horak, Peter; Alam, Shaif-Ul; Ibsen, Morten

    2014-09-22

    We both experimentally and numerically studied the ultra-compact wavelength conversion by using the four-wave mixing (FWM) process in Raman distributed-feedback (R-DFB) fiber lasers. The R-DFB fiber laser is formed in a 30 cm-long commercially available Ge/Si standard optical fiber. The internal generated R-DFB signal acts as the pump wave for the FWM process and is in the normal dispersion range of the fiber. Utilizing a tunable laser source as a probe wave, FWM frequency conversion up to ~40 THz has been demonstrated with conversion efficiency > -40 dB. The principle of such a wide bandwidth and high conversion efficiency in such a short R-DFB cavity has been theoretically analyzed. The simulation results match well with the experimental data.

  2. Detailed sedimentological study in deltaic upper sequence of the Thrace Basin, northwest Turkey

    SciTech Connect

    Aksoy, M.Z. )

    1990-05-01

    The Thrace basin forms one of the largest Tertiary sedimentary basins in Turkey. Paleontological and sedimentological evidence suggests that sedimentation and basin formation commenced by a major transgression from the southwest in the middle to late middle Eocene. Sedimentological studies indicate that two major depositional cycles prevailed during the formation of the Thrace basin. The lower sequence of sediments (first cycle) was deposited in deep marine environments by turbidity currents as submarine fans (approximately 3,500 m thick). The upper sequence of sediments (second cycle) was deposited in various subenvironments, of which deltaic depositional conditions were the most prominent and 2,600 m thick sediments were deposited. The total sedimentary thickness (6,100 m), deposited until the end of the Oligocene, indicates that rates of subsidence and deposition were quite high. Deltaic deposition started in the beginning of the Oligocene when the rate of subsidence slowed. At this time, the Thrace basin was relatively filled to its maximum capacity and shallow-marine conditions became prevalent. It is seen that initially the rate of sedimentation was higher than the rate of subsidence. Sedimentation in the basin continued from the beginning of the middle Eocene to the end of the Oligocene, with no break in sedimentation. The depositional environment changed from deep marine fan deposits to deltas. Geometry and sand-body thickness along with the sand/shale ratio throughout the delta sequence have been determined using data obtained from 29 wells. Based on this study, deltaic sand bodies in the Thrace basin are now among the major hydrocarbon exploration targets.

  3. [A clinical study on 106 infant cases who received detailed hearing tests after newborn hearing screening].

    PubMed

    Okano, Takayuki; Iwai, Noriko; Taniguchi, Mirei; Ito, Juichi

    2014-10-01

    Newborn hearing screening (NHS) has been conducted widely in Japan in the last decade, however, there seems to be some confusion regarding the significance of NHS or management of the results obtained from NHS among clinics and practitioners. The system of NHS in Japan should be improved and refined through continuous evaluation of NHS, in terms of cost effectiveness in particular, so that NHS can be conducted more efficiently and effectively. To achieve this goal, the authors thought it important to clarify the current status and roles of our department as a facility for infants with congenital hearing impairment. In the present study, we studied 106 infant cases who were referred to the Department of Otolaryngology in Kyoto University Hospital after NHS before the age of twelve months in a period of seven years from 2006 to 2012 via retrospective chart reviewing. 79.2% of 96 infants who were qualified as referred either unilaterally or bilaterally following NHS were diagnosed as having hearing impairment in any form, either unilateral or bilateral, or conductive and/or sensorineural. The positive agreement rate was 88.7% in 53 cases who were qualified as referred bilaterally in NHS, demonstrating a high reliability of the NHS system. Twenty-four cases were diagnosed as having the need for hearing aids and were assigned to treatment and education. All the infants who underwent cochlear implantation in our department had severe bilateral hearing impairment of more than 105 dBnHL in both ears at the first examination. Moreover, a number of infants who were qualified as having passed in both ears in NHS or who had failed to receive NHS at birth were revealed as having hearing impairment and needed treatment later in the first year of their life, suggesting that NHS should be conducted in combination with periodical health checkups by family practitioners in order to identify infants with hearing impairment earlier in their life with higher efficacy.

  4. A Detailed Spatial Study of HI and OVI Absorbing Gas Around Galaxies

    NASA Astrophysics Data System (ADS)

    Mathes, Nigel; Churchill, C. W.; Kacprzak, G.; Nielsen, N. M.; Charlton, J. C.; Muzahid, S.

    2014-01-01

    Neutral hydrogen probed by the Lyα transition in quasar absorption spectra traces the circumgalactic and intergalactic medium (CGM and IGM) of distant galaxies. The exact phase and composition of the gas associated with each region along with the spatial boundary separating the two has yet to be specifically characterized. To probe this region, we present a sample of 17 isolated galaxies with high resolution Hubble Space Telescope images and spectra lying within 400 kpc of a quasar line of sight between redshfits 0.1 < z < 0.7. We model each associated absorption system using a Voigt Profile fitting method for Lyα, Lyβ and OVI, which yields column densities, Doppler b parameters, and velocities for each cloud. We also model each galaxy to obtain its orientation on the sky and employ Halo Abundance Matching to determine the galaxy mass and virial radius. In contrast to previous studies using MgII absorbers, we find a near uniform distribution of absorbing gas clouds at all projected angles around the galaxies. We also find Lyα absorbing clouds out to impact parameters of 300 kpc and OVI absorbers out to 250 kpc. Together, this implies an extended, warm gas halo surrounding the galaxies in our sample. To better characterize these halos and to study the boundary between the CGM and IGM, we explore column densities and kinematics at different impact parameters. We find all Lyα systems with column densities higher than the sample average (logN(HI) > 15 cm-2) are located within the virial radius of their associated galaxies. We also find that kinematically unbound clouds are more likely to be found outside the virial radius (46% of clouds outside the virial radius have velocities in excess of the galaxy escape velocity, whereas only 10% of clouds within the virial radius have velocities high enough to escape). No such boundary exists when considering only physical impact parameters. We observe a distinct physical difference between gas inside and outside of a galaxy

  5. The Canadian Cluster Comparison Project: detailed study of systematics and updated weak lensing masses

    NASA Astrophysics Data System (ADS)

    Hoekstra, Henk; Herbonnet, Ricardo; Muzzin, Adam; Babul, Arif; Mahdavi, Andi; Viola, Massimo; Cacciato, Marcello

    2015-05-01

    Masses of clusters of galaxies from weak gravitational lensing analyses of ever larger samples are increasingly used as the reference to which baryonic scaling relations are compared. In this paper we revisit the analysis of a sample of 50 clusters studied as part of the Canadian Cluster Comparison Project. We examine the key sources of systematic error in cluster masses. We quantify the robustness of our shape measurements and calibrate our algorithm empirically using extensive image simulations. The source redshift distribution is revised using the latest state-of-the-art photometric redshift catalogues that include new deep near-infrared observations. None the less we find that the uncertainty in the determination of photometric redshifts is the largest source of systematic error for our mass estimates. We use our updated masses to determine b, the bias in the hydrostatic mass, for the clusters detected by Planck. Our results suggest 1 - b = 0.76 ± 0.05 (stat) ± 0.06 (syst), which does not resolve the tension with the measurements from the primary cosmic microwave background.

  6. a Detailed Study about Digital Surface Model Generation Using High Resolution Satellite Stereo Imagery

    NASA Astrophysics Data System (ADS)

    Gong, K.; Fritsch, D.

    2016-06-01

    Photogrammetry is currently in a process of renaissance, caused by the development of dense stereo matching algorithms to provide very dense Digital Surface Models (DSMs). Moreover, satellite sensors have improved to provide sub-meter or even better Ground Sampling Distances (GSD) in recent years. Therefore, the generation of DSM from spaceborne stereo imagery becomes a vivid research area. This paper presents a comprehensive study about the DSM generation of high resolution satellite data and proposes several methods to implement the approach. The bias-compensated Rational Polynomial Coefficients (RPCs) Bundle Block Adjustment is applied to image orientation and the rectification of stereo scenes is realized based on the Project-Trajectory-Based Epipolarity (PTE) Model. Very dense DSMs are generated from WorldView-2 satellite stereo imagery using the dense image matching module of the C/C++ library LibTsgm. We carry out various tests to evaluate the quality of generated DSMs regarding robustness and precision. The results have verified that the presented pipeline of DSM generation from high resolution satellite imagery is applicable, reliable and very promising.

  7. Detailed study of oxidation/wear mechanism in lox turbopump bearings

    NASA Technical Reports Server (NTRS)

    Chase, T. J.; Mccarty, J. P.

    1993-01-01

    Wear of 440C angular contact ball bearings of the phase 2 high pressure oxygen turbopump (HPOTP) of the space shuttle main engine (SSME) has been studied by means of various advanced nondestructive techniques (NDT) and modeled with reference to all known material, design, and operation variables. Three modes dominating the wear scenario were found to be the adhesive/sheer peeling (ASP), oxidation, and abrasion. Bearing wear was modeled in terms of the three modes. Lacking a comprehensive theory of rolling contact wear to date, each mode is modeled after well-established theories of sliding wear, while sliding velocity and distance are related to microsliding in ball-to-ring contacts. Microsliding, stress, temperature, and other contact variables are evaluated with analytical software packages of SHABERTH(TM)/SINDA(TM) and ADORE(TM). Empirical constants for the models are derived from NIST experiments by applying the models to the NIST wear data. The bearing wear model so established precisely predicts quite well the average ball wear rate for the HPOTP bearings. The wear rate has been statistically determined for the entire population of flight and development bearings based on Rocketdyne records to date. Numerous illustrations are given.

  8. Detailed study of oxidation/wear mechanism in lox turbopump bearings

    NASA Astrophysics Data System (ADS)

    Chase, T. J.; McCarty, J. P.

    1993-12-01

    Wear of 440C angular contact ball bearings of the phase 2 high pressure oxygen turbopump (HPOTP) of the space shuttle main engine (SSME) has been studied by means of various advanced nondestructive techniques (NDT) and modeled with reference to all known material, design, and operation variables. Three modes dominating the wear scenario were found to be the adhesive/sheer peeling (ASP), oxidation, and abrasion. Bearing wear was modeled in terms of the three modes. Lacking a comprehensive theory of rolling contact wear to date, each mode is modeled after well-established theories of sliding wear, while sliding velocity and distance are related to microsliding in ball-to-ring contacts. Microsliding, stress, temperature, and other contact variables are evaluated with analytical software packages of SHABERTH(TM)/SINDA(TM) and ADORE(TM). Empirical constants for the models are derived from NIST experiments by applying the models to the NIST wear data. The bearing wear model so established precisely predicts quite well the average ball wear rate for the HPOTP bearings. The wear rate has been statistically determined for the entire population of flight and development bearings based on Rocketdyne records to date. Numerous illustrations are given.

  9. NMR relaxometry study of plaster mortar with polymer additives

    SciTech Connect

    Jumate, E.; Manea, D.; Moldovan, D.; Fechete, R.

    2013-11-13

    The cement mixed with water forms a plastic paste or slurry which stiffness in time and finally hardens into a resistant stone. The addition of sand aggregates, polymers (Walocel) and/or calcium carbonate will modify dramatically the final mortar mechanic and thermal properties. The hydration processes can be observed using the 1D NMR measurements of transverse T{sub 2} relaxation times distributions analysed by a Laplace inversion algorithm. These distributions were obtained for mortar pasta measured at 2 hours after preparation then at 3, 7 and 28 days after preparation. Multiple components are identified in the T{sub 2} distributions. These can be associated with the proton bounded chemical or physical to the mortar minerals characterized by a short T{sub 2} relaxation time and to water protons in pores with three different pore sizes as observed from SEM images. The evaporation process is faster in the first hours after preparation, while the mortar hydration (bonding of water molecules to mortar minerals) can be still observed after days or months from preparation. Finally, the mechanic resistance was correlated with the transverse T{sub 2} relaxation rates corresponding to the bound water.

  10. A Detailed Study of Contamination in Deep Rapid Searches for Gravitational Wave Optical Counterparts

    NASA Astrophysics Data System (ADS)

    Cowperthwaite, Philip; Berger, Edo; Chornock, Ryan; Fong, Wen-fai

    2015-01-01

    The first direct detection of gravitational waves (GW) by the Advanced LIGO/VIRGO (aLIGO/VIRGO) collaboration is expected to occur within the next few years. In order to maximize the science gains from such a detection it is essential that we identify an electromagnetic counterpart. One of the most promising counterparts is the so-called 'kilonovae,' a fast-evolving (t ~ days) and faint (z ~ 24 AB mag) optical transient powered by the radioactive decay of r-process elements generated in the merger. However, the poor initial localization of aLIGO/VIRGO (~ 100 sq. deg.) demand the use of wide-field telescopes. Furthermore, the cadences and depths used by current and future wide-field optical surveys (e.g. PTF/ZTF, PANStarrs, LSST) are sub-optimal for kilonovae detection. We present our attempts to tackle these issues by investigating the theoretical and practical issues associated with optical follow-up of an aLIGO/VIRGO GW event. This includes a systematic study of the potential contaminant population and their impact on kilonovae detectability in simulated observations. We show that kilonovae can remain separated from contaminants by the virtue of their red colors (i - z > 0.5) and short timescales. This theoretical analysis will be tested against observations obtained by the DECam wide-field imager on the CTIO Blanco 4m telescope. These data attempt to simulate the wide area coverage (~ 70 sq. deg.) and rapid cadence (two visits per night in i,z) necessary for targeted GW follow-up and will provide an excellent test bed for understanding the practical issues associated with this endeavor. This work is supported in part by the NSF GRFP grant DGE1144152.

  11. A Detailed Study of Debris Flow Source Areas in the Northern Colorado Front Range.

    NASA Astrophysics Data System (ADS)

    Arana-Morales, A.; Baum, R. L.; Godt, J.

    2014-12-01

    Nearly continuous, heavy rainfall occurred during 9-13 September 2013 causing flooding and widespread landslides and debris flows in the northern Colorado Front Range. Whereas many recent studies have identified erosion as the most common process leading to debris flows in the mountains of Colorado, nearly all of the debris flows mapped in this event began as small, shallow landslides. We mapped the boundaries of 415 September 2013 debris flows in the Eldorado Springs and Boulder 7.5-minute quadrangles using 0.5-m-resolution satellite imagery. We characterized the landslide source areas of six debris flows in the field as part of an effort to identify what factors controlled their locations. Four were on a dip slope in sedimentary rocks in the Pinebrook Hills area, near Boulder, and the other two were in granitic rocks near Gross Reservoir. Although we observed no obvious geomorphic differences between the source areas and surrounding non-landslide areas, we noted several characteristics that the source areas all had in common. Slopes of the source areas ranged from 28° to 35° and most occurred on planar or slightly concave slopes that were vegetated with grass, small shrubs, and sparse trees. The source areas were shallow, irregularly shaped, and elongated downslope: widths ranged from 4 to 9 m, lengths from 6 to 40 m and depths ranged from 0.7 to 1.2 m. Colluvium was the source material for all of the debris flows and bedrock was exposed in the basal surface of all of the source areas. We observed no evidence for concentrated surface runoff upslope from the sources. Local curvature and roughness of bedrock and surface topography, and depth distribution and heterogeneity of the colluvium appear to have controlled the specific locations of these shallow debris-flow source areas. The observed distribution and characteristics of the source areas help guide ongoing efforts to model initiation of the debris flows.

  12. Detailing Radio Frequency Heating Induced by Coronary Stents: A 7.0 Tesla Magnetic Resonance Study

    PubMed Central

    Santoro, Davide; Winter, Lukas; Müller, Alexander; Vogt, Julia; Renz, Wolfgang; Özerdem, Celal; Grässl, Andreas; Tkachenko, Valeriy; Schulz-Menger, Jeanette; Niendorf, Thoralf

    2012-01-01

    The sensitivity gain of ultrahigh field Magnetic Resonance (UHF-MR) holds the promise to enhance spatial and temporal resolution. Such improvements could be beneficial for cardiovascular MR. However, intracoronary stents used for treatment of coronary artery disease are currently considered to be contra-indications for UHF-MR. The antenna effect induced by a stent together with RF wavelength shortening could increase local radiofrequency (RF) power deposition at 7.0 T and bears the potential to induce local heating, which might cause tissue damage. Realizing these constraints, this work examines RF heating effects of stents using electro-magnetic field (EMF) simulations and phantoms with properties that mimic myocardium. For this purpose, RF power deposition that exceeds the clinical limits was induced by a dedicated birdcage coil. Fiber optic probes and MR thermometry were applied for temperature monitoring using agarose phantoms containing copper tubes or coronary stents. The results demonstrate an agreement between RF heating induced temperature changes derived from EMF simulations versus MR thermometry. The birdcage coil tailored for RF heating was capable of irradiating power exceeding the specific-absorption rate (SAR) limits defined by the IEC guidelines by a factor of three. This setup afforded RF induced temperature changes up to +27 K in a reference phantom. The maximum extra temperature increase, induced by a copper tube or a coronary stent was less than 3 K. The coronary stents examined showed an RF heating behavior similar to a copper tube. Our results suggest that, if IEC guidelines for local/global SAR are followed, the extra RF heating induced in myocardial tissue by stents may not be significant versus the baseline heating induced by the energy deposited by a tailored cardiac transmit RF coil at 7.0 T, and may be smaller if not insignificant than the extra RF heating observed under the circumstances used in this study. PMID:23185498

  13. Transgenic insecticidal crops and natural enemies: a detailed review of laboratory studies.

    PubMed

    Lövei, Gabor L; Andow, David A; Arpaia, Salvatore

    2009-04-01

    This review uses a data-driven, quantitative method to summarize the published, peer-reviewed literature about the impact of genetically modified (GM) plants on arthropod natural enemies in laboratory experiments. The method is similar to meta-analysis, and, in contrast to a simple author-vote counting method used by several earlier reviews, gives an objective, data-driven summary of existing knowledge about these effects. Significantly more non-neutral responses were observed than expected at random in 75% of the comparisons of natural enemy groups and response classes. These observations indicate that Cry toxins and proteinase inhibitors often have non-neutral effects on natural enemies. This synthesis identifies a continued bias toward studies on a few predator species, especially the green lacewing, Chrysoperla carnea Stephens, which may be more sensitive to GM insecticidal plants (16.8% of the quantified parameter responses were significantly negative) than predators in general (10.9% significantly negative effects without C. carnea). Parasitoids were more susceptible than predators to the effects of both Cry toxins and proteinase inhibitors, with fewer positive effects (18.0%, significant and nonsignificant positive effects combined) than negative ones (66.1%, significant and nonsignificant negative effects combined). GM plants can have a positive effect on natural enemies (4.8% of responses were significantly positive), although significant negative (21.2%) effects were more common. Although there are data on 48 natural enemy species, the database is still far from adequate to predict the effect of a Bt toxin or proteinase inhibitor on natural enemies.

  14. Serotonergic involvement in methamphetamine-induced locomotor activity: a detailed pharmacological study.

    PubMed

    Steed, Emily; Jones, Caitlin A; McCreary, Andrew C

    2011-06-20

    The mechanism by which the psychostimulant methamphetamine (METH) increases locomotor activity may be attributable to indirect activation of serotonin (5-HT) and dopamine (DA) receptors. In the present study, the ability of the serotonin reuptake inhibitor fluvoxamine, 5-HT(1A), 5-HT(1B), 5-HT(2A) and 5-HT(2C) receptor antagonists WAY100635, GR127935, M100907 and SB242084, and the 5-HT(2C) receptor agonists WAY163909 and Ro 60-0175 or the 5-HT synthesis inhibitor para-chlorophenylalanine (pCPA) to alter METH-induced hyperactivity was analysed. Further, for comparative purposes, the involvement of the DA D(1) and D(2) receptor antagonists SCH23390 and haloperidol, D(2) partial agonists terguride, (-)3PPP and aripiprazole and finally clozapine were assessed. Doses of pCPA that attenuated 5-HT levels reduced METH activity. The 5-HT(1B) antagonist GR127935 had no effect on METH-induced locomotor activity but blocked that induced by MDMA. The 5-HT(1A) antagonist WAY100635 reduced activity but this did not reach significance. In contrast, M100907 (minimal effective dose; MED=0.125 mg/kg), WAY163909 (MED=3mg/kg), Ro 60-0175 (MED=3mg/kg), haloperidol (MED=0.1mg/kg), clozapine (MED=5mg/kg), aripiprazole (MED=1mg/kg), (-)3PPP (MED=3mg/kg), terguride (MED=0.2mg/kg) and SCH23390 (MED=0.001325 mg/kg) attenuated METH-induced locomotor activity. Administration of 20mg/kg fluvoxamine attenuated, while SB242084 (MED=0.25mg/kg) potentiated METH-induced activity. These results contribute significantly to the understanding of the mechanism of action of this psychostimulant and suggest for the first time, that METH-induced locomotor stimulation is modulated by 5-HT(2A) and 5-HT(2C) receptors, but demonstrate that 5-HT(1B) receptors are not directly involved. The involvement of the dopaminergic system was also demonstrated.

  15. Additional EIPC Study Analysis: Interim Report on High Priority Topics

    SciTech Connect

    Hadley, Stanton W

    2013-11-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 13 topics was developed for further analysis; this paper discusses the first five.

  16. A new approach to the study of detail perception in Autism Spectrum Disorder (ASD): investigating visual feedforward, horizontal and feedback processing.

    PubMed

    Vandenbroucke, Myriam W G; Scholte, H Steven; van Engeland, Herman; Lamme, Victor A F; Kemner, Chantal

    2009-05-01

    Enhanced detail processing is a characteristic of ASD. However, previous studies could not yet provide a neural explanation of this trait. Since the balance between visual feedforward and feedback processing is probably essential for the character of visual perception, we conjectured that this balance is disturbed in ASD. Using a new texture discrimination task, where surface segregation was varied independently from orientation boundaries, we showed that subjects with ASD scored lower than controls, probably caused by enhanced feedback. Interestingly, performance improved in the ASD group when repeating the task two additional times, indicating a compensation for the imbalance between feedforward and feedback processing. PMID:18267323

  17. A Detailed Study of FDIRC Prototype with Waveform Digitizing Electronics in Cosmic Ray Telescope Using 3D Tracks.

    SciTech Connect

    Nishimura, K

    2012-07-01

    We present a detailed study of a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC) with waveform digitizing electronics. In this test study, the FDIRC prototype has been instrumented with seven Hamamatsu H-8500 MaPMTs. Waveforms from ~450 pixels are digitized with waveform sampling electronics based on the BLAB2 ASIC, operating at a sampling speed of ~2.5 GSa/s. The FDIRC prototype was tested in a large cosmic ray telescope (CRT) providing 3D muon tracks with ~1.5 mrad angular resolution and muon energy of Emuon greater than 1.6 GeV. In this study we provide a detailed analysis of the tails in the Cherenkov angle distribution as a function of various variables, compare experimental results with simulation, and identify the major contributions to the tails. We demonstrate that to see the full impact of these tails on the Cherenkov angle resolution, it is crucial to use 3D tracks, and have a full understanding of the role of ambiguities. These issues could not be fully explored in previous FDIRC studies where the beam was perpendicular to the quartz radiator bars. This work is relevant for the final FDIRC prototype of the PID detector at SuperB, which will be tested this year in the CRT setup.

  18. A Detailed Study of FDIRC Prototype with Waveform Digitizing Electronics in Cosmic Ray Telescope Using 3D Tracks

    SciTech Connect

    Nishimura, K.; Dey, B.; Aston, D.; Leith, D.W.G.S.; Ratcliff, B.; Roberts, D.; Ruckman, L.; Shtol, D.; Varner, G.S.; Va'vra, J.; Vavra, Jerry; /SLAC

    2012-07-30

    We present a detailed study of a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC) with waveform digitizing electronics. In this test study, the FDIRC prototype has been instrumented with seven Hamamatsu H-8500 MaPMTs. Waveforms from {approx}450 pixels are digitized with waveform sampling electronics based on the BLAB2 ASIC, operating at a sampling speed of {approx}2.5 GSa/s. The FDIRC prototype was tested in a large cosmic ray telescope (CRT) providing 3D muon tracks with {approx}1.5 mrad angular resolution and muon energy of E{sub muon} > 1.6 GeV. In this study we provide a detailed analysis of the tails in the Cherenkov angle distribution as a function of various variables, compare experimental results with simulation, and identify the major contributions to the tails. We demonstrate that to see the full impact of these tails on the Cherenkov angle resolution, it is crucial to use 3D tracks, and have a full understanding of the role of ambiguities. These issues could not be fully explored in previous FDIRC studies where the beam was perpendicular to the quartz radiator bars. This work is relevant for the final FDIRC prototype of the PID detector at SuperB, which will be tested this year in the CRT setup.

  19. A detailed study on the use of polynomial functions for modeling geometric distortion in magnetic resonance imaging.

    PubMed

    Wang, Deming; Yang, Zhengyi

    2008-03-01

    The use of polynomial functions for modeling geometric distortion in magnetic resonance imaging (MRI) that arises from scanner's hardware imperfection is studied in detail. In this work, the geometric distortion data from four representative MRI systems were used. Modeling of these data using polynomial functions of the fourth, fifth, sixth, and seventh orders was carried out. In order to investigate how this modeling performed for different size and shape of the volume of interest, the modeling was carried out for three different volumes of interest (VOI): a cube, a cylinder, and a sphere. The modeling's goodness was assessed using both the maximum and mean absolute errors. The modeling results showed that (i) for the cube VOI there appears to be an optimal polynomial function that gives the least modeling errors and the sixth order polynomial was found to be the optimal polynomial function for the size of the cubic VOI considered in the present work; (ii) for the cylinder VOI, all four polynomials performed approximately equally well but a trend of a slight decrease in the mean absolute error with the increasing order of the polynomial was noted; and (iii) for the sphere VOI, the maximum absolute error showed some variations with the order of the polynomial, with the fourth order polynomial producing the smallest maximum absolute errors. It is further noted that extrapolation could lead to very large errors so any extrapolation needs to be avoided. A detailed analysis on the modeling errors is presented.

  20. Detailed diesel exhaust characteristics including particle surface area and lung deposited dose for better understanding of health effects in human chamber exposure studies

    NASA Astrophysics Data System (ADS)

    Wierzbicka, Aneta; Nilsson, Patrik T.; Rissler, Jenny; Sallsten, Gerd; Xu, Yiyi; Pagels, Joakim H.; Albin, Maria; Österberg, Kai; Strandberg, Bo; Eriksson, Axel; Bohgard, Mats; Bergemalm-Rynell, Kerstin; Gudmundsson, Anders

    2014-04-01

    Several diesel exhaust (DE) characteristics, comprising both particle and gas phase, recognized as important when linking with health effects, are not reported in human chamber exposure studies. In order to understand effects of DE on humans there is a need for better characterization of DE when performing exposure studies. The aim of this study was to determine and quantify detailed DE characteristics during human chamber exposure. Additionally to compare to reported DE properties in conducted human exposures. A wide battery of particle and gas phase measurement techniques have been used to provide detailed DE characteristics including the DE particles (DEP) surface area, fraction and dose deposited in the lungs, chemical composition of both particle and gas phase such as NO, NO2, CO, CO2, volatile organic compounds (including aldehydes, benzene, toluene) and polycyclic aromatic hydrocarbons (PAHs). Eyes, nose and throat irritation effects were determined. Exposure conditions with PM1 (<1 μm) mass concentration 280 μg m-3, number concentration 4 × 105 cm-3 and elemental to total carbon fraction of 82% were generated from a diesel vehicle at idling. When estimating the lung deposited dose it was found that using the size dependent effective density (in contrast to assuming unity density) reduced the estimated respiratory dose by 132% by mass. Accounting for agglomerated structure of DEP prevented underestimation of lung deposited dose by surface area by 37% in comparison to assuming spherical particles. Comparison of DE characteristics reported in conducted chamber exposures showed that DE properties vary to a great extent under the same DEP mass concentration and engine load. This highlights the need for detailed and standardized approach for measuring and reporting of DE properties. Eyes irritation effects, most probably caused by aldehydes in the gas phase, as well as nose irritation were observed at exposure levels below current occupational exposure limit

  1. TERSSE: Definition of the Total Earth Resources System for the Shuttle Era. Volume 5: Detailed system requirements: Two case studies

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Major resource management missions to be performed by the TERSSE are examined in order to develop an understanding of the form and function of a system designed to perform an operational mission. Factors discussed include: resource manager (user) functions, methods of performing their function, the information flows and information requirements embodied in their function, and the characteristics of the observation system which assists in the management of the resource involved. The missions selected for study are: world crop survey and land resources management. These missions are found to represent opposite ends of the TERSSE spectrum and to support the conclusion that different missions require different systems and must be analyzed in detail to permit proper system development decisions.

  2. A detailed seismic anisotropy study during the 2011-2012 unrest period in the Santorini Volcanic Complex

    NASA Astrophysics Data System (ADS)

    Kaviris, G.; Papadimitriou, P.; Kravvariti, Ph.; Kapetanidis, V.; Karakonstantis, A.; Voulgaris, N.; Makropoulos, K.

    2015-01-01

    The Santorini Volcanic Complex (SVC) is an area in the Southern Aegean (Greece) which has been characterized by low seismicity rates for the last decades, especially in the Santorini Caldera where they have been very low until 2010. This pattern changed completely in February 2011, when intense microseismic activity was initiated within the Caldera. During the manual analysis of the events, the shear-wave splitting phenomenon was observed, revealing the existence of an anisotropic upper crust in the SVC area. A detailed anisotropy study has been conducted using 231 events within the shear-wave window that fulfilled the selection criteria. The polarization direction of the fast shear-wave, the time-delay between the two split shear-waves and the source polarization direction were calculated after visual inspection, using both the polarigram and the hodogram representations. This procedure, applied for eight local stations, resulted in the determination of 340 splitting parameters. The obtained mean anisotropy directions are not homogeneous, revealing a complex regime in the activated area. Nevertheless, these results are explained by the APE model, related to the stress-sensitive behavior of fluid-saturated microcracked rocks. A detailed analysis of the temporal evolution of both the time-delay and anisotropy direction was carried out. The time-delays measured in the “band-1” window exhibit gradual increase and sudden drop that can be related to imminent bursts of seismicity, as well as to the major Mw = 5.1 and 5.2 events which took place about 40 km SW of Santorini on 26 and 27 January 2012, respectively. On the other hand, no significant temporal variations or 90° flips of the Sfast polarization direction were observed.

  3. Detailed Analysis of the Binding Mode of Vanilloids to Transient Receptor Potential Vanilloid Type I (TRPV1) by a Mutational and Computational Study.

    PubMed

    Ohbuchi, Katsuya; Mori, Yoshikazu; Ogawa, Kazuo; Warabi, Eiji; Yamamoto, Masahiro; Hirokawa, Takatsugu

    2016-01-01

    Transient receptor potential vanilloid type 1 (TRPV1) is a non-selective cation channel and a multimodal sensor protein. Since the precise structure of TRPV1 was obtained by electron cryo-microscopy, the binding mode of representative agonists such as capsaicin and resiniferatoxin (RTX) has been extensively characterized; however, detailed information on the binding mode of other vanilloids remains lacking. In this study, mutational analysis of human TRPV1 was performed, and four agonists (capsaicin, RTX, [6]-shogaol and [6]-gingerol) were used to identify amino acid residues involved in ligand binding and/or modulation of proton sensitivity. The detailed binding mode of each ligand was then simulated by computational analysis. As a result, three amino acids (L518, F591 and L670) were newly identified as being involved in ligand binding and/or modulation of proton sensitivity. In addition, in silico docking simulation and a subsequent mutational study suggested that [6]-gingerol might bind to and activate TRPV1 in a unique manner. These results provide novel insights into the binding mode of various vanilloids to the channel and will be helpful in developing a TRPV1 modulator. PMID:27606946

  4. Detailed Analysis of the Binding Mode of Vanilloids to Transient Receptor Potential Vanilloid Type I (TRPV1) by a Mutational and Computational Study

    PubMed Central

    Mori, Yoshikazu; Ogawa, Kazuo; Warabi, Eiji; Yamamoto, Masahiro; Hirokawa, Takatsugu

    2016-01-01

    Transient receptor potential vanilloid type 1 (TRPV1) is a non-selective cation channel and a multimodal sensor protein. Since the precise structure of TRPV1 was obtained by electron cryo-microscopy, the binding mode of representative agonists such as capsaicin and resiniferatoxin (RTX) has been extensively characterized; however, detailed information on the binding mode of other vanilloids remains lacking. In this study, mutational analysis of human TRPV1 was performed, and four agonists (capsaicin, RTX, [6]-shogaol and [6]-gingerol) were used to identify amino acid residues involved in ligand binding and/or modulation of proton sensitivity. The detailed binding mode of each ligand was then simulated by computational analysis. As a result, three amino acids (L518, F591 and L670) were newly identified as being involved in ligand binding and/or modulation of proton sensitivity. In addition, in silico docking simulation and a subsequent mutational study suggested that [6]-gingerol might bind to and activate TRPV1 in a unique manner. These results provide novel insights into the binding mode of various vanilloids to the channel and will be helpful in developing a TRPV1 modulator. PMID:27606946

  5. A detailed study of the site effects in the volcanic area of Campi Flegrei using empirical approaches

    NASA Astrophysics Data System (ADS)

    Tramelli, Anna; Galluzzo, Danilo; Del Pezzo, Edoardo; Di Vito, Mauro A.

    2010-08-01

    Campi Flegrei is a highly populated active caldera in the south of Italy. Several hundred thousand people live within this area, which is characterized by seismicity and ground deformation episodes, known as `bradyseism'. For this reason, this area falls into a high-risk category and thus the Italian Civil Defence requires a detailed site-effect estimation. To determine the local amplification of the seismic waves for a high number of sites, we have analysed the seismic recordings of three seismic networks that have been deployed in the Campi Flegrei area over different time periods. The first network was deployed during the bradyseismic crisis of 1982-1984. We selected 22 of the highest magnitude earthquakes that were recorded during this crisis. An additional 22 seismic events were selected from those recorded by the mobile seismic network that has been in operation in the Campi Flegrei area since 2006. The third data set comprises noise recorded by 34 seismic stations that were deployed during the active SERAPIS experiment in 2001 September. The generalized inversion technique and the H/V spectral ratio method were applied to the S waves and coda waves of the earthquakes recorded by the first two seismic networks, to determine the site-transfer functions of the recording stations. The seismic noise recorded by the third network was analysed using the Nakamura's technique. The results show that the high topographical and geological heterogeneity of the sites located inside the caldera has an important influence on the seismic-wave amplification. Consequently, the site-transfer functions can be different even at sites close to each other. The transfer functions of the sites located outside the caldera are much more regular, apparently due to the more regular topography and geology.

  6. Detailed study of SNR G306.3-0.9 using XMM-Newton and Chandra observations

    NASA Astrophysics Data System (ADS)

    Combi, J. A.; García, F.; Suárez, A. E.; Luque-Escamilla, P. L.; Paron, S.; Miceli, M.

    2016-08-01

    Aims: We aim to study the spatial distribution of the physical and chemical properties of the X-ray emitting plasma of the supernova remnant (SNR) G306.3-0.9 in detail to obtain constraints on its ionization stage, the progenitor supernova explosion, and the age of the remnant. Methods: We used combined data from XMM-Newton and Chandra observatories to study the X-ray morphology of G306.3-0.9 in detail. A spatially resolved spectral analysis was used to obtain physical and geometrical parameters of different regions of the remnant. Spitzer infrared observations, available in the archive, were also used to constrain the progenitor supernova and study the environment in which the remnant evolved. Results: The X-ray morphology of the remnant displays a non-uniform structure of semi-circular appearance, with a bright southwest region and very weak or almost negligible X-ray emission in its northern part. These results indicate that the remnant is propagating in a non-uniform environment as the shock fronts are encountering a high-density medium, where enhanced infrared emission is detected. The X-ray spectral analysis of the selected regions shows distinct emission-line features of several metal elements, confirming the thermal origin of the emission. The X-ray spectra are well represented by a combination of two absorbed thermal plasma models: one in equilibrium ionization (VAPEC) with a mean temperature of ~0.19 keV, and another out of equilibrium ionization (VNEI) at a higher temperature of ~1.1 or 1.6-1.9 keV. For regions located in the northeast, central, and southwest part of the SNR, we found elevated abundances of Si, S, Ar, Ca, and Fe, typical of ejecta material. The outer regions located northwest and south show values of the abundances above solar but lower than to those found in the central regions. This suggests that the composition of the emitting outer parts of the SNR is a combination of ejecta and shocked material of the interstellar medium. The

  7. A detailed study of a 6 deg diameter field in Scutum. I - Data presentation and overall description of the interstellar matter distribution

    NASA Astrophysics Data System (ADS)

    Reichen, M.; Lanz, T.; Golay, M.; Huguenin, D.

    1990-01-01

    Data on a detailed study of the absorption and interstellar matter distribution in the 6-deg diameter field centered on the star Epsilon Scutum, using frames from the SCAP-2000 UV survey, are presented. Ultraviolet magnitudes at 2000 A were obtained, and 322 stars were measured in the Geneva photometric system. In order to determine spectral types and confirm the distance determination, medium-resolution spectra were obtained for a small number of photometrically distant objects. An overall description of the distribution of interstellar material in the UV is made using star counting methods. Variations of the extinction law in different parts of the field are discussed. A new distance determination of the Sct OB2 association is proposed, and a list of additional probable members of the association is presented.

  8. The use of detailed reservoir description and simulation studies in investigating completion strategies, cormorant, UK North Sea

    SciTech Connect

    Stiles, J.H.; Valenti, N.P.

    1987-01-01

    A portion of the Cormorant field in the U.K. North Sea is being developed using a subsea production system. All layers in the stratified reservoir section are being waterflooded concurrently by perforating the entire interval in both producers and injectors. The permeability contrast among the layers is such that there is potential for severe imbalance in the movement of the waterflood fronts, resulting in large volumes of early water production from high permeability layers and incomplete displacement of oil from less permeable layers. With the high cost of expanding platform facilities or performing workovers on subsea wells to re-distribute production and/or injection, there is considerable incentive to optimise the completions in new wells. This paper describes studies undertaken by Esso Exploration and Production U.K. to evaluate various completion strategies for newe subsea wells. These studies were done to complement work done by the operator, Shell U.K. Explorations and Production. The studies included detailed reservoir description work to define the oil-in-pace and permeability distribution, followed by simulation of the waterflood for a representative reservoir cross-section. Wellbore, flowline and pipeline hydraulics for the complex productions and injection system were included to more accurately model well rates. The results provide general insight into the nature of the displacement when waterflooding a stratified section with a limited nuber of wells. They also provide specific guidance on: (1) dual vs. single completions, (2) perforating, testing and stimulation sequence and (3) the benefits of partially perforating high permeability sands.

  9. A Detailed Study of the Amino Acids Produced from the Vacuum UV Irradiation of Interstellar Ice Analogs

    NASA Astrophysics Data System (ADS)

    Nuevo, Michel; Auger, Geneviève; Blanot, Didier; D'Hendecourt, Louis

    2008-02-01

    We present a detailed analysis of the variety, quantity and distribution of the amino acids detected in organic residues after acid hydrolysis. Such organic residues are produced in the laboratory after the vacuum ultraviolet (VUV) irradiation of several astrophysically relevant ice mixtures containing H2O, CO, CO2, CH3OH, CH4 and NH3 at low temperature (10-80 K), and subsequent warm-up to room temperature. We explore five experimental parameters: the irradiation time, the temperature, the ice mixture composition, the photon dose per molecule and the substrate for the ice deposition. The amino acids were detected and identified by ex-situ liquid chromatography analysis of the organic residues formed after warming the photolysed ices up to room temperature. This study shows that in all experiments amino acids are formed. Their total quantities and distribution depend slightly on the experimental parameters explored in the present work, the important requirement to form such molecules being that the starting ice mixtures must contain the four elements C, H, O and N. We also discuss the effects of the chemical treatment needed to detect and identify the amino acids in the organic residues. Finally, these results are compared with meteoritic amino acid data from the carbonaceous chondrite Murchison, and the formation processes of such compounds under astrophysical conditions are discussed.

  10. Spectral features of the quasielastic line in amorphous solids and supercooled liquids: a detailed low-frequency Raman scattering study.

    PubMed

    Yannopoulos, S N; Kastrissios, D Th

    2002-02-01

    The spectral features of the quasielastic light scattering in amorphous solids and supercooled liquids are investigated through a combined Stokes and antiStokes low-frequency Raman scattering study. Emphasis is given on the specific spectral details of the quasielastic line rather than on elucidating its microscopic origin. Our approach is quite general since it includes glass formers with a strong, an intermediate, and a fragile dynamic character. The results suggest that the quasielastic contribution is a symmetric spectral feature around the laser line. This finding makes possible the separation of the quasielastic line and the Boson peak. It further raises certain skepticism concerning reduction schemes followed up in the literature for the analysis of low-frequency Raman data and for models that combine these two contributions. The limiting (omega-->0) behavior of the product of the vibrational density of states and the Raman coupling coefficient has also been extracted. The validity of some phenomenological approaches is also discussed in light of the experimental facts presented in this paper and some suggestions are being advanced. PMID:11863533

  11. Detailed abundance study of four s-process enriched post-AGB stars in the Large Magellanic Cloud

    NASA Astrophysics Data System (ADS)

    van Aarle, E.; Van Winckel, H.; De Smedt, K.; Kamath, D.; Wood, P. R.

    2013-06-01

    Context. The photospheric abundances of evolved solar-type stars of different metallicities serve as probes into stellar evolution theory. Aims: Stellar photospheres of post-asymptotic giant branch (post-AGB) stars bear witness to the internal chemical enrichment processes, integrated over their entire stellar evolution. Here we study post-AGB stars in the Large Magellanic Cloud (LMC). With their known distances, these rare objects are ideal tracers of AGB nucleosynthesis and dredge-up phenomena. Methods: We used the UVES spectrograph mounted on the Very Large Telescope at the European Southern Observatory, to obtain high-resolution spectra with high signal-to-noise of a sample of four post-AGB stars. The objects display a spectral energy distribution that indicates the presence of circumstellar dust. We perform a detailed abundance analysis on the basis of these spectra. Results: All objects are C-rich, and strongly enhanced in s-process elements. We deduced abundances of heavy s-process elements for all stars in the sample, and even found an indication of the presence of Hg in the spectrum of one object. The metallicity of all stars except J053253.51-695915.1 is considerably lower than the average value that is observed for the LMC. The derived luminosities show that we witness the late evolution of low-mass stars with initial masses close to 1 M⊙. An exception is J053253.51-695915.1 and we argue that this object is likely a binary. Conclusions: We confirmed the correlation between the efficiency of the third-dredge up and the neutron exposure that is detected in Galactic post-AGB stars. The non-existence of a correlation between metallicity and neutron irradiation is also confirmed and expanded to smaller metallicities. We confirm the status of 21 μm stars as post-carbon stars. Current theoretical AGB models overestimate the observed C/O ratios and fail to reproduce the variety of s-process abundance patterns that is observed in otherwise very similar objects

  12. Detailed homogeneous abundance studies of 14 Galactic s-process enriched post-AGB stars: In search of lead (Pb)

    NASA Astrophysics Data System (ADS)

    De Smedt, K.; Van Winckel, H.; Kamath, D.; Siess, L.; Goriely, S.; Karakas, A. I.; Manick, R.

    2016-03-01

    Context. This paper is part of a larger project in which we systematically study the chemical abundances of Galactic and extragalactic post-asymptotic giant branch (post-AGB) stars. The goal at large is to provide improved observational constraints to the models of the complex interplay between the AGB s-process nucleosynthesis and the associated mixing processes. Aims: Lead (Pb) is the final product of the s-process nucleosynthesis and is predicted to have large overabundances with respect to other s-process elements in AGB stars of low metallicities. However, Pb abundance studies of s-process enriched post-AGB stars in the Magellanic Clouds show a discrepancy between observed and predicted Pb abundances. The determined upper limits based on spectral studies are much lower than what is predicted. In this paper, we focus specifically on the Pb abundance of 14 Galactic s-process enhanced post-AGB stars to check whether the same discrepancy is present in the Galaxy as well. Among these 14 objects, two were not yet subject to a detailed abundance study in the literature. We apply the same method to obtain accurate abundances for the 12 others. Our homogeneous abundance results provide the input of detailed spectral synthesis computations in the spectral regions where Pb lines are located. Methods: We used high-resolution UVES and HERMES spectra for detailed spectral abundance studies of our sample of Galactic post-AGB stars. None of the sample stars display clear Pb lines, and we only deduced upper limits of the Pb abundance by using spectrum synthesis in the spectral ranges of the strongest Pb lines. Results: We do not find any clear evidence of Pb overabundances in our sample. The derived upper limits are strongly correlated with the effective temperature of the stars with increasing upper limits for increasing effective temperatures. We obtain stronger Pb constraints on the cooler objects. Moreover, we confirm the s-process enrichment and carbon enhancement of two

  13. Detailed homogeneous abundance studies of 14 Galactic s-process enriched post-AGB stars: In search of lead (Pb)

    NASA Astrophysics Data System (ADS)

    De Smedt, K.; Van Winckel, H.; Kamath, D.; Siess, L.; Goriely, S.; Karakas, A. I.; Manick, R.

    2016-03-01

    Context. This paper is part of a larger project in which we systematically study the chemical abundances of Galactic and extragalactic post-asymptotic giant branch (post-AGB) stars. The goal at large is to provide improved observational constraints to the models of the complex interplay between the AGB s-process nucleosynthesis and the associated mixing processes. Aims: Lead (Pb) is the final product of the s-process nucleosynthesis and is predicted to have large overabundances with respect to other s-process elements in AGB stars of low metallicities. However, Pb abundance studies of s-process enriched post-AGB stars in the Magellanic Clouds show a discrepancy between observed and predicted Pb abundances. The determined upper limits based on spectral studies are much lower than what is predicted. In this paper, we focus specifically on the Pb abundance of 14 Galactic s-process enhanced post-AGB stars to check whether the same discrepancy is present in the Galaxy as well. Among these 14 objects, two were not yet subject to a detailed abundance study in the literature. We apply the same method to obtain accurate abundances for the 12 others. Our homogeneous abundance results provide the input of detailed spectral synthesis computations in the spectral regions where Pb lines are located. Methods: We used high-resolution UVES and HERMES spectra for detailed spectral abundance studies of our sample of Galactic post-AGB stars. None of the sample stars display clear Pb lines, and we only deduced upper limits of the Pb abundance by using spectrum synthesis in the spectral ranges of the strongest Pb lines. Results: We do not find any clear evidence of Pb overabundances in our sample. The derived upper limits are strongly correlated with the effective temperature of the stars with increasing upper limits for increasing effective temperatures. We obtain stronger Pb constraints on the cooler objects. Moreover, we confirm the s-process enrichment and carbon enhancement of two

  14. Properties of inelastic yielding zones generated by in-plane dynamic ruptures—II. Detailed parameter-space study

    NASA Astrophysics Data System (ADS)

    Xu, Shiqing; Ben-Zion, Yehuda; Ampuero, Jean-Paul

    2012-12-01

    We perform a detailed parameter-space study on properties of yielding zones generated by 2-D in-plane dynamic ruptures on a planar fault with different friction laws and parameters, different initial stress conditions, different rock cohesion values, and different contrasts of elasticity and mass density across the fault. The focus is on cases corresponding to large strike-slip faults having high angle (?) to the maximum compressive background stress. The simulations and analytical scaling results show that for crack-like ruptures (1) the maximum yielding zone thickness Tmax linearly increases with rupture distance L and the ratio Tmax/L is inversely proportional to (1 +S)2 with S being the relative strength parameter; (2) the potency density ? decays logarithmically with fault normal distance at a rate depending on the stress state and S; (3) increasing rock cohesion reduces Tmax/L, resulting in faster rupture speed and higher inclination angle ? of expected microfractures on the extensional side of the fault. For slip pulses in quasi-steady state, T is approximately constant along strike with local values correlating with the maximum slip velocity (or final slip) at a location. For a bimaterial interface with ?, the energy dissipation to yielding contributes to developing macroscopically asymmetric rupture (at the scale of rupture length) with the same preferred propagation direction predicted for purely elastic cases with Coulomb friction. When ?, representative for thrust faulting, the energy dissipation to yielding leads to opposite preferred rupture propagation. In all cases, ? is higher on average on the compliant side. For both crack and pulse ruptures with ?, T decreases and ? increases for conditions representing greater depth. Significant damage asymmetry of the type observed across several large strike-slip faults likely implies persistent macroscopic rupture asymmetry (unilateral cracks, unilateral pulses or asymmetric bilateral pulses). The results on

  15. 13. DETAIL VIEW OF BRIDGE, LOOKING SOUTH FROM ROADWAY. DETAIL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. DETAIL VIEW OF BRIDGE, LOOKING SOUTH FROM ROADWAY. DETAIL VIEW OF THE PIERS AND LIGHTING FIXTURES ON THE COLORADO STREET BRIDGE. THIS VIEW SHOWS A PORTION OF THE BRIDGE ALONG THE SOUTH SIDE OF THE ROADWAY. EACH FIXTURE ALSO ORIGINALLY HAD FOUR ADDITIONAL GLOBES, WHICH EXTENDED FROM THE COLUMN BELOW THE MAIN GLOBE. THE 'REFUGE' SEATING AREAS ARE ORIGINAL, WHILE THE RAILING IS A LATER ADDITION. - Colorado Street Bridge, Spanning Arroyo Seco at Colorado Boulevard, Pasadena, Los Angeles County, CA

  16. Study of wood plastic composite in the presence of nitrogen containing additives

    NASA Astrophysics Data System (ADS)

    Ali, K. M. Idriss; Khan, Mubarak A.; Husain, M. M.

    1994-10-01

    Effect of nitrogen-containing additives in the study of wood plastic composites of MMA with simul and mango wood of Bangladesh has been investigated. Nine different additives were used and the additives containing carboamide group induce the highest tensile strength to the composite.

  17. Detailed study of a catchment prone to debris flows along the International Road n° 7, Mendoza Province, Argentina

    NASA Astrophysics Data System (ADS)

    Wick, E.; Baumann, V.; Favre-Bulle, G.; Jaboyedoff, M.; Loye, A.; Marengo, H.; Rosas, M.

    2009-04-01

    The International Road 7 crosses Argentina from East to West, linking Buenos Aires to the Chile border. Crossing the Andes Cordillera, it is exposed to numerous natural hazards, such as avalanches, rockfalls and debris flows. This study focuses on a catchment prone to debris flows above the International Road n° 7 between Potrerillos and Uspallata (Mendoza Province, Argentina) and is part of a regional study that assesses the hazard along the mountainous section of this road. The catchment measures 4.7 km2 and is constituted of three main torrents that unite a few meters above the International Road. Heavy rainfalls triggered debris flows in each of these torrents during the evening of 11 January 2005, reaching the road apparently at a very short interval of time. A car was hit by one of these debris flows and two people were injured. The study has been realized from Quickbird satellite imagery and field data principally. The conditions that triggered the debris flows in this catchment were established from meteorological data, as well as particle size and mineralogy of the material. Satellite imagery and a digital elevation model showed that the debris flows initiated mainly at the top of the catchment. Erosion of a highly altered granite produced abundant sandy material. The debris flows were classified as granular matrix with a collisional-frictional behavior. Various calculations of volumes, peak discharges and velocities (~ 7 m/s) were realized using different approaches. It appears that important volumes could be mobilized, especially in the longest torrent. A new event could imply more than 65'000 m3 of material. A detailed geomorphologic study shows the effect of mitigation works on the debris flows hazard. Indeed, the torrents were deviated towards a more adequate place for the construction of a road bridge. Three propagation scenarios show the limited efficiency of these works. The road bridge is under-dimensioned and deposits of the 2005 event have not

  18. Early Archean spherule beds of possible impact origin from Barberton, South Africa: A detailed mineralogical and geochemical study

    NASA Astrophysics Data System (ADS)

    Koeberl, Christian; Reimold, Wolf Uwe; Boer, Rudolf H.

    1992-12-01

    The Barberton Greenstone belt is a 3.5- to 3.2-Ga-old formation situated in the Swaziland Supergroup near Barberton, northeast Transvaal, South Africa. The belt includes a lower, predominantly volcanic sequence, and an upper sedimentary sequence (e.g., the Fig Tree Group). Within this upper sedimentary sequence, Lowe and Byerly identified a series of different beds of spherules with diameters of around 0.5-2 mm. Lowe and Byerly and Lowe et al. have interpreted these spherules to be condensates of rock vapor produced by large meteorite impacts in the early Archean. We have collected a series of samples from drill cores from the Mt. Morgan and Princeton sections near Barberton, as well as samples taken from underground exposures in the Sheba and Agnes mines. These samples seem much better preserved than the surface samples described by Lowe and Byerly and Lowe et al. Over a scale of just under 30 cm, several well-defined spherule beds are visible, interspaced with shales and/or layers of banded iron formation. Some spherules have clearly been deposited on top of a sedimentary unit because the shale layer shows indentions from the overlying spherules. Although fresher than the surface samples (e.g., spherule bed S-2), there is abundant evidence for extensive alteration, presumably by hydrothermal processes. In some sections of the cores sulfide mineralization is common. For our mineralogical and petrographical studies we have prepared detailed thin sections of all core and underground samples (as well as some surface samples from the S-2 layer for comparison). For geochemical work, layers with thicknesses in the order of 1-5 mm were separated from selected core and underground samples. The chemical analyses are being performed using neutron activation analysis in order to obtain data for about 35 trace elements in each sample. Major elements are being determined by XRF and plasma spectrometry. To clarify the history of the sulfide mineralization, sulfur isotopic

  19. Early Archean spherule beds of possible impact origin from Barberton, South Africa: A detailed mineralogical and geochemical study

    NASA Technical Reports Server (NTRS)

    Koeberl, Christian; Reimold, Wolf Uwe; Boer, Rudolf H.

    1992-01-01

    The Barberton Greenstone belt is a 3.5- to 3.2-Ga-old formation situated in the Swaziland Supergroup near Barberton, northeast Transvaal, South Africa. The belt includes a lower, predominantly volcanic sequence, and an upper sedimentary sequence (e.g., the Fig Tree Group). Within this upper sedimentary sequence, Lowe and Byerly identified a series of different beds of spherules with diameters of around 0.5-2 mm. Lowe and Byerly and Lowe et al. have interpreted these spherules to be condensates of rock vapor produced by large meteorite impacts in the early Archean. We have collected a series of samples from drill cores from the Mt. Morgan and Princeton sections near Barberton, as well as samples taken from underground exposures in the Sheba and Agnes mines. These samples seem much better preserved than the surface samples described by Lowe and Byerly and Lowe et al. Over a scale of just under 30 cm, several well-defined spherule beds are visible, interspaced with shales and/or layers of banded iron formation. Some spherules have clearly been deposited on top of a sedimentary unit because the shale layer shows indentions from the overlying spherules. Although fresher than the surface samples (e.g., spherule bed S-2), there is abundant evidence for extensive alteration, presumably by hydrothermal processes. In some sections of the cores sulfide mineralization is common. For our mineralogical and petrographical studies we have prepared detailed thin sections of all core and underground samples (as well as some surface samples from the S-2 layer for comparison). For geochemical work, layers with thicknesses in the order of 1-5 mm were separated from selected core and underground samples. The chemical analyses are being performed using neutron activation analysis in order to obtain data for about 35 trace elements in each sample. Major elements are being determined by XRF and plasma spectrometry. To clarify the history of the sulfide mineralization, sulfur isotopic

  20. Detailed Debunking of Denial

    NASA Astrophysics Data System (ADS)

    Enting, I. G.; Abraham, J. P.

    2012-12-01

    The disinformation campaign against climate science has been compared to a guerilla war whose tactics undermine the traditional checks and balances of science. One comprehensive approach has to been produce archives of generic responses such as the websites of RealClimate and SkepticalScience. We review our experiences with an alternative approach of detailed responses to a small number of high profile cases. Our particular examples were Professor Ian Plimer and Christopher Monckton, the Third Viscount Monckton of Brenchley, each of whom has been taken seriously by political leaders in our respective countries. We relate our experiences to comparable examples such as John Mashey's analysis of the Wegman report and the formal complaints about Lomborg's "Skeptical Environmentalist" and Durkin's "Great Global Warming Swindle". Our two approaches used contrasting approaches: an on-line video of a lecture vs an evolving compendium of misrepresentations. Additionally our approaches differed in the emphasis. The analysis of Monckton concentrated on the misrepresentation of the science, while the analysis of Plimer concentrated on departures from accepted scientific practice: fabrication of data, misrepresentation of cited sources and unattributed use of the work of others. Benefits of an evolving compendium were the ability to incorporate contributions from members of the public who had identified additional errors and the scope for addressing new aspects as they came to public attention. `Detailed debunking' gives non-specialists a reference point for distinguishing non-science when engaging in public debate.

  1. On the structure and dynamics of Ellerman bombs. Detailed study of three events and modelling of Hα

    NASA Astrophysics Data System (ADS)

    Bello González, N.; Danilovic, S.; Kneer, F.

    2013-09-01

    Aims: We study the structure and dynamics of three Ellerman bombs (EBs) observed in an evolving active region. Methods: The active region NOAA 11271 was observed with the Vacuum Tower Telescope at Observatorio del Teide/Tenerife on August 18, 2011. We used the two-dimensional Triple Etalon SOlar Spectrometer (TESOS) to obtain time sequences of the active region and of EBs in Hα at a cadence of 15 s. Simultaneously, we obtained full Stokes profiles with the Tenerife Infrared Polarimeter (TIP II) in the two magnetically sensitive Fe i infrared lines (IR) at 1.56 μ, scanning spatial sections of the area with cadences of 28-46 s. The Hα data were reconstructed with speckle methods to study the evolution of the atmospheric stratification. Two methods were used to extract magnetic field information from the IR Stokes profiles: 1) fitting of the (Q,U,V) profiles by Gaussians; and 2) applying the Milne-Eddington approximation, assuming two separate magnetic structures in the resolution element and fitting by trial and error some profiles from the EB areas. Data from SDO-HMI and -AIA were also used. We performed two-dimensional (2D) non-LTE radiative transfer calculations of Hα in parameterised models of EBs. Results: The three EBs studied in detail occurred in a complex active region near sunspots. They were very bright with a factor of 1.5-2.8 brighter than the nearby area. They lived for 1/2 h and longer. They were related to broadband faculae, but the latter were not the brightest features in the field of view. The EBs occurred in magnetic field configurations with opposite polarity close together. One EB was located at the outskirts of a penumbra of a complex sunspot and showed repeated "flaring" in SDO-AIA data. Another was close to a strong field patch and moved into this during the end of its lifetime. The third EB showed clear changes of field structure during the time it was observed. We obtained from the 2D modelling that heating and increase in Hα opacity

  2. Supramolecular polymerisation in water; elucidating the role of hydrophobic and hydrogen-bond interactions† †Electronic supplementary information (ESI) available: Experimental details, characterization by IR and UV spectroscopy and dynamic light scattering, video files of optical microscopy imaging. See DOI: 10.1039/c5sm02843d Click here for additional data file. Click here for additional data file. Click here for additional data file. Click here for additional data file.

    PubMed Central

    Leenders, Christianus M. A.; Baker, Matthew B.; Pijpers, Imke A. B.; Lafleur, René P. M.; Albertazzi, Lorenzo

    2016-01-01

    Understanding the self-assembly of small molecules in water is crucial for the development of responsive, biocompatible soft materials. Here, a family of benzene-1,3,5-tricarboxamide (BTA) derivatives that comprise a BTA moiety connected to an amphiphilic chain is synthesised with the aim to elucidate the role of hydrophobic and hydrogen-bonding interactions in the self-assembly of these BTAs. The amphiphilic chain consists of an alkyl chain with a length of 10, 11, or 12 methylene units, connected to a tetraethylene glycol (at the periphery). The results show that an undecyl spacer is the minimum length required for these BTAs to self-assemble into supramolecular polymers. Interestingly, exchange studies reveal only minor differences in exchange rates between BTAs containing undecyl or dodecyl spacers. Additionally, IR spectroscopy provides the first experimental evidence that hydrogen-bonding is operative and contributes to the stabilisation of the supramolecular polymers in water. PMID:26892482

  3. A detailed radiobiological and dosimetric analysis of biochemical outcomes in a case-control study of permanent prostate brachytherapy patients

    SciTech Connect

    Butler, Wayne M.; Stewart, Renee R.; Merrick, Gregory S.

    2009-03-15

    the harmonic mean and expressions of the generalized EUD. In this case-control study of prostate brachytherapy biochemical failures and nonfailures, there were no radiobiological parameters derived from detailed DVH-based analysis that predicted for biochemical control. This may indicate that in our approach, implant dosimetry is at or near the limits of clinically effective dose escalation.

  4. A near-infrared spectroscopic study of young field ultracool dwarfs: additional analysis

    NASA Astrophysics Data System (ADS)

    Allers, K. N.; Liu, M. C.

    We present additional analysis of the classification system presented in \\citet{allers13}. We refer the reader to \\citet{allers13} for a detailed discussion of our near-IR spectral type and gravity classification system. Here, we address questions and comments from participants of the Brown Dwarfs Come of Age meeting. In particular, we examine the effects of binarity and metallicity on our classification system. We also present our classification of Pleiades brown dwarfs using published spectra. Lastly, we determine SpTs and calculate gravity-sensitive indices for the BT-Settl atmospheric models and compare them to observations.

  5. Water masers in Compton-thick AGN. I. Detailed study of the new water megamaser in IRAS 15480-0344

    NASA Astrophysics Data System (ADS)

    Castangia, P.; Tarchi, A.; Caccianiga, A.; Severgnini, P.; Della Ceca, R.

    2016-02-01

    Context. A relationship between the water maser detection rate and large nuclear column densities in AGN has often been cited in the literature. Indeed, detailed studies of luminous water masers, typically associated with the nuclear activity, allow us to investigate the innermost regions of AGN, with an impact on the still debated Unified Model for this class of objects. Aims: We have recently entertained a search for maser emission in a well-defined sample of Compton-thick AGN aimed at investigating, on firm statistical bases, the aforementioned relationship. While the survey is still ongoing, and is the subject of a forthcoming publication, a new luminous water maser has been detected in the lenticular (field) S0 galaxy IRAS 15480-0344, whose origin, associated with an accretion disc or a nuclear outflow/jet, needs to be assessed. Methods: Multi-epoch single-dish observations and VLBI measurements were performed to investigate the distribution, spatial extension, and variability of the maser emission in order to infer the main characteristics of the water megamaser. Results: The new detection in IRAS 15480-0344 is reported: a megamaser with a total single-dish isotropic luminosity of ~200 L⊙ and a profile composed of two main features, a broad line with a full width to half maximum (FWHM) linewidth of ~90 km s-1 and a narrow (FWHM< 1 km s-1) one. We performed a follow-up to the detection with the Very Long Baseline Array (VLBA) and confidently detected only the narrow component, which is coincident with the nuclear radio continuum emission detected with the Very Large Array at 8.4 GHz. A weak narrow feature has also been detected in the velocity range of the broad feature and is located 15 pc to the north-west with respect to the stronger component. Neither maser spot is associated with the compact radio continuum sources derived from the same VLBA dataset. Conclusions: The different line profiles and the spatial separation between the two features in the

  6. Physical, chemical, and biological data for detailed study of irrigation drainage in the Salton Sea area, California, 1988-90

    USGS Publications Warehouse

    Schroeder, R.A.; Rivera, Mick

    1993-01-01

    This report contains physical, chemical, and biological data associated with irrigation drainage in the Salton Sea area collected during the late 1980's. The data were collected in support of the u.S. Department of the Interior's National Irrigation Water Quality Program in the Western United States to evaluate effects on the environment from potential toxics in irrigation-induced drainage. The data have been used to support interpretations in several recent publications. This data report is the companion to a comprehensive U.S. Geological Survey interpretive report that describes the geochemical and biological pathways of potential toxics, especially selenium, in the study area. The report contains data on concentra- tions of a broad suite of trace elements in soil, irrigation (Colorado River) water, drainwater, surface water (including the Salton Sea), ground- water, aquatic plants, invertebrates, amphibians, reptiles, fish, birds, bird eggs, and turtle eggs. Included, also, are light stable isotope (hydrogen, oxygen, carbon, nitrogen, and sulfur), tritium, and radiocarbon data for selected aqueous samples and organochlorine-pesticide concentrations in biota. Geochemical samples were collected from more than 100 drainwater-collection sites, several surface- water locations, 15 fields, 3 multiple-depth lysimeter and piezometer installations, and the Alamo River Delta on the southeastern shore of the Salton Sea, and from laboratory evaporations of Colorado River water. Biological samples were collected from 39 sites, including 16 Salton Sea shore locations, 5 streams, 7 freshwater impound- ments, 11 drainwater ditches, and 2 additional locations in the Imperial Valley. (USGS)

  7. On the Origin of the High Lava Plains Volcanic Track: A Detailed Tomographic Study and Multidisciplinary Interpretation

    NASA Astrophysics Data System (ADS)

    James, D. E.; Fouch, M. J.; Wagner, L. S.; Carlson, R. W.; Eagar, K. C.; Roth, J. B.

    2011-12-01

    , submitted, 2011). We interpret the new body wave tomography in relationship to both crustal structure and recently published regional 3-D surface wave inversions of the crust and uppermost mantle (e.g., Wagner et al., EPSL, vol. 299, 273-284, 2010): The crustal studies reveal zones of abnormally high Poisson's ratios and low seismic velocities in the crust beneath northcentral and southern Oregon, marking the likely presence of partial melt adjacent to, but not within, the main HLP lineament. The surface wave results likewise show an apparent lack of correlation between low S-wave velocities in the uppermost mantle and the track of the HLP lineament itself. We will present detailed cross-sectional and map images that help better define the relationship between uppermost mantle structure and the on-going HLP volcanism. Finally, we will present and assess arguments as to subduction vs. plume origins of the HLP and the surrounding tectonic terranes.

  8. Influences on physicians' adoption of electronic detailing (e-detailing).

    PubMed

    Alkhateeb, Fadi M; Doucette, William R

    2009-01-01

    E-detailing means using digital technology: internet, video conferencing and interactive voice response. There are two types of e-detailing: interactive (virtual) and video. Currently, little is known about what factors influence physicians' adoption of e-detailing. The objectives of this study were to test a model of physicians' adoption of e-detailing and to describe physicians using e-detailing. A mail survey was sent to a random sample of 2000 physicians practicing in Iowa. Binomial logistic regression was used to test the model of influences on physician adoption of e-detailing. On the basis of Rogers' model of adoption, the independent variables included relative advantage, compatibility, complexity, peer influence, attitudes, years in practice, presence of restrictive access to traditional detailing, type of specialty, academic affiliation, type of practice setting and control variables. A total of 671 responses were received giving a response rate of 34.7%. A total of 141 physicians (21.0%) reported using of e-detailing. The overall adoption model for using either type of e-detailing was found to be significant. Relative advantage, peer influence, attitudes, type of specialty, presence of restrictive access and years of practice had significant influences on physician adoption of e-detailing. The model of adoption of innovation is useful to explain physicians' adoption of e-detailing. PMID:19306198

  9. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  10. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  11. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  12. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  13. 7 CFR 1710.253 - Engineering and cost studies-addition of generation capacity.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Engineering and cost studies-addition of generation... TO ELECTRIC LOANS AND GUARANTEES Construction Work Plans and Related Studies § 1710.253 Engineering... engineering and cost studies as specified by RUS. The studies shall cover a period from the beginning of...

  14. Detailed Study of the Angular Correlations in the Prompt Neutron Emission in Spontaneous Fission of 252Cf

    NASA Astrophysics Data System (ADS)

    Kopatch, Yu.; Chietera, A.; Stuttgé, L.; Gönnenwein, F.; Mutterer, M.; Gagarski, A.; Guseva, I.; Chernysheva, E.; Dorvaux, O.; Hambsch, F.-J.; Hanappe, F.; Mezentseva, Z.; Telezhnikov, S.

    An experiment has been performed at IPHC Strasbourg, aimed at the detailed investigation of angular correlations in the neutron emission from spontaneous fission of 252Cf. Fission fragments were measured by the angle-sensitive double ionization chamber CODIS while neutrons were detected by a set of 60 DEMON scintillator counters. The main aim of the experiment is the observation of the correlation between the fragment spins and neutron emission anisotropy. Preliminary results, based on the Monte-Carlo simulations, as well as the preliminary analysis of the experimental data are shown.

  15. From an MMIC chip to a working cryogenic low-noise amplifier: a detailed study on packaging

    NASA Astrophysics Data System (ADS)

    Valenziano, L.; Mariotti, S.; Armogida, A.; Baz, A.; Biggi, M.; Carbonaro, L.; Cremonini, A.; De Rosa, A.; Gervasi, M.; Passerini, A.; Schiavone, F.; Zannoni, M.; Zuccarelli, J.

    2012-09-01

    Cryogenic Low Noise Amplifiers, based on MMIC HEMT technology, require a careful packaging to reach optimal performance. Differences between modeled and measured performance can often be related to chip mounting details. In the framework of the development of new cryogenic LNAs, described in a companion paper, we have developed a specific packaging to host W-band cryogenic MMIC LNAs. We present here some of the main factors analyzed in the design and chip integration activities. In particular, mechanical and thermal modeling, LNA chip gluing and adhesive properties, sensitivity to components integration accuracy (i.e. deviation from the ideal orientation). Preliminary test results are also reported.

  16. Detailed study and mean field interpretation of {sup 16}O+{sup 12}C elastic scattering at seven medium energies

    SciTech Connect

    Nicoli, M. P.; Haas, F.; Freeman, R. M.; Szilner, S.; Basrak, Z.; Morsad, A.; Satchler, G. R.; Brandan, M. E.

    2000-03-01

    Detailed measurements of the elastic scattering of {sup 16}O ions from {sup 12}C have been carried out at seven energies from 62 to 124 MeV, at center-of-mass angles from about 10 degree sign to about 145 degree sign . A coherent optical model analysis of these data has been performed using both the Woods-Saxon and the folding-model potentials. The extracted results are consistent with analyses of data at higher energies for this and similar light heavy-ion systems. Some model-independent spline forms for the real potentials were also investigated. (c) 2000 The American Physical Society.

  17. Nursing Home Ownership Trends and Their Impact on Quality of Care: A Study Using Detailed Ownership Data from Texas

    PubMed Central

    Stevenson, David G.; Bramson, Jeffrey S.; Grabowski, David C.

    2016-01-01

    The role of ownership in the provision of nursing home care has long been a challenging issue for policymakers and researchers. Although much of the focus historically has been on differences between for-profit and not-for-profit facilities, this simple distinction has become less useful in recent years as companies have employed more complicated ownership and management structures. Using detailed ownership data from the State of Texas, we describe the evolution of nursing home corporate structures from 2000–2007, analyze the effect of these structures on quality of care and staffing in nursing homes, and discuss the policy implications of these changes. PMID:23256557

  18. Selectivity improvement in the solvent refined coal process. I - Detailed first-stage reaction studies - Coal mineral catalysis. II - Detailed second-stage reaction studies - Hydrotreating of coal liquids

    NASA Astrophysics Data System (ADS)

    Garg, D.; Tarrer, A. R.; Guin, J. A.; Curtis, C. W.; Clinton, J. H.

    1980-08-01

    A two stage process is investigated for the production of a low-sulfur solid SRC-I (solvent refined coal) type boiler fuel with a minimum consumption of hydrogen. The first stage involves the scavenging action of coal minerals. Mineral additives (e.g., iron oxide and iron) increase selectivity for hydrodesulfurization over hydrogenation in coal liquefaction reactions. Mineral residues from SRC processes show insignificant desulfurization activity, but through oxidation, their sulfurization activity increases to significant levels without an increase in hydrogenation activity. The sulfur removal activity of an additive depends on its surface area. The second stage involves hydrotreating the dissolver effluent for maximum sulfur removal, with a minimum consumption of hydrogen. The effect of a wide range of variables on hydrotreating of a coal liquid in the presence of a commercial Co-Mo-Al catalyst is evaluated. The variables include catalyst loading, hydrogen partial pressure, reaction temperature and time.

  19. Space shuttle/food system study. Volume 2, Appendix G: Ground support system analysis. Appendix H: Galley functional details analysis

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The capabilities for preflight feeding of flight personnel and the supply and control of the space shuttle flight food system were investigated to determine ground support requirements; and the functional details of an onboard food system galley are shown in photographic mockups. The elements which were identified as necessary to the efficient accomplishment of ground support functions include the following: (1) administration; (2) dietetics; (3) analytical laboratories; (4) flight food warehouse; (5) stowage module assembly area; (6) launch site module storage area; (7) alert crew restaurant and disperse crew galleys; (8) ground food warehouse; (9) manufacturing facilities; (10) transport; and (11) computer support. Each element is discussed according to the design criteria of minimum cost, maximum flexibility, reliability, and efficiency consistent with space shuttle requirements. The galley mockup overview illustrates the initial operation configuration, food stowage locations, meal assembly and serving trays, meal preparation configuration, serving, trash management, and the logistics of handling and cleanup equipment.

  20. Detailed geochemical study of the Dan River-Danville Triassic Basin, North Carolina and Virginia. National Uranium Resource Evaluation Program

    SciTech Connect

    Thayer, P. A.; Cook, J. R.

    1982-08-01

    This abbreviated data report presents results of surface geochemical reconnaissance in the Dan River-Danville Triassic Basin of north-central North Carolina and south-central Virginia. Unweathered rock samples were collected at 380 sites within the basin at a nominal sampling density of one site per square mile. Field measurements and observations are reported for each site; analytical data and field measurements are presented in tables and maps. A detailed four-channel spectrometric survey was conducted, and the results are presented as a series of symbol plot maps for eU, eTh, and eU/eTh. Data from rock sample sites (on microfiche in pocket) include rock type and color and elemental analyses for U, Th, Hf, Al, Ce, Dy, Eu, Fe, La, Lu, Mn, Na, Sc, Sm, Ti, V, and Yb. Elemental uranium in 362 sedimentary rock samples from the Dan River-Danville Basin ranges from a low of 0.1 to a maximum of 13.3 parts per million (ppM). The log mean uranium concentration for these same samples is 0.37 ppM, and the log standard deviation is 0.24 ppM. Elemental uranium in 10 diabase dike samples from within the basin is in the range 0.1 to 0.7 ppM. The log mean uranium concentration for diabase samples is -.65 ppM, and the log standard deviation is 0.27. This report is issued in draft form, without detailed technical and copy editing. This was done to make the report available to the public before the end of the NURE program.

  1. Unravelling the impact of hydrocarbon structure on the fumarate addition mechanism--a gas-phase ab initio study.

    PubMed

    Bharadwaj, Vivek S; Vyas, Shubham; Villano, Stephanie M; Maupin, C Mark; Dean, Anthony M

    2015-02-14

    The fumarate addition reaction mechanism is central to the anaerobic biodegradation pathway of various hydrocarbons, both aromatic (e.g., toluene, ethyl benzene) and aliphatic (e.g., n-hexane, dodecane). Succinate synthase enzymes, which belong to the glycyl radical enzyme family, are the main facilitators of these biochemical reactions. The overall catalytic mechanism that converts hydrocarbons to a succinate molecule involves three steps: (1) initial H-abstraction from the hydrocarbon by the radical enzyme, (2) addition of the resulting hydrocarbon radical to fumarate, and (3) hydrogen abstraction by the addition product to regenerate the radical enzyme. Since the biodegradation of hydrocarbon fuels via the fumarate addition mechanism is linked to bio-corrosion, an improved understanding of this reaction is imperative to our efforts of predicting the susceptibility of proposed alternative fuels to biodegradation. An improved understanding of the fuel biodegradation process also has the potential to benefit bioremediation. In this study, we consider model aromatic (toluene) and aliphatic (butane) compounds to evaluate the impact of hydrocarbon structure on the energetics and kinetics of the fumarate addition mechanism by means of high level ab initio gas-phase calculations. We predict that the rate of toluene degradation is ∼100 times faster than butane at 298 K, and that the first abstraction step is kinetically significant for both hydrocarbons, which is consistent with deuterium isotope effect studies on toluene degradation. The detailed computations also show that the predicted stereo-chemical preference of the succinate products for both toluene and butane are due to the differences in the radical addition rate constants for the various isomers. The computational and kinetic modeling work presented here demonstrates the importance of considering pre-reaction and product complexes in order to accurately treat gas phase systems that involve intra and inter

  2. Studies of jet fuel additives using the quartz crystal microbalance and pressure monitoring at 140 C

    SciTech Connect

    Zabarnick, S.; Grinstead, R.R. . Aerospace Mechanics Div./KL-463)

    1994-11-01

    Recent advances in jet aircraft and engine technology have placed an ever increasing heat load on the aircraft. The bulk of this excess heat is absorbed by the aircraft fuel, as jet fuel is used as the primary coolant for the numerous heat sources. The quartz crystal microbalance (QCM) and pressure monitoring are used for the evaluation of jet fuel additives for the improvement of jet fuel thermal stability. The mechanisms of additive behavior are determined by measuring the time-dependent deposition with the QCM and oxidation by pressure measurements. Studies at various additive concentrations permits the determination of optimum additive concentrations. Additive packages made of mixtures of antioxidants, detergent/dispersants, and metal deactivators are shown to yield good improvements in thermal stability over a wide range of jet fuel types.

  3. Imaging spectrometer trade studies: a detailed comparison of the Offner-Chrisp and reflective triplet optical design forms

    NASA Astrophysics Data System (ADS)

    Cook, Lacy G.; Silny, John F.

    2010-08-01

    High quality imaging spectroscopy data is useful for both military and civilian applications. Current state-of-the-art imaging spectrometers typically rely on the Offner-Chrisp (OC) optical form. Making use of a spherically concentric, axially symmetric, and telecentric design, the OC imaging spectrometer provides excellent spectral-spatial uniformity but with many regrets: (1) no real-entrance pupil, (2) relatively slow optical speeds, (3) required convex diffraction grating, (4) narrow field-of-view, and (5) limited scalability. Recently, the Raytheon patented Reflective Triplet (RT) optical design form has produced extremely large format imaging spectrometers of exceptional quality. The RT optical design provides spectral-spatial uniformity comparable to the OC form, but with a number of advantages: (1) extremely large fields-of-view, (2) faster optical speeds, (3) a real-entrance pupil for optimal cold shielding and calibration, (4) use of either a prism or flat diffraction grating operating in collimated space (with an option for both simultaneously in a 2- channel device), and (5) extremely wide spectral range using common reflective optics and multiple focal plane arrays, dispersive elements, and entrance slits. This paper presents a number of detailed designs exemplifying the differences between the OC and RT forms.

  4. The gas-rich circumbinary disk of HR 4049. I. A detailed study of the mid-infrared spectrum

    SciTech Connect

    Malek, S. E.; Cami, J. E-mail: jcami@uwo.ca

    2014-01-01

    We present a detailed analysis of the mid-infrared spectrum of the peculiar evolved object HR 4049. The full Spitzer-IRS high-resolution spectrum shows a wealth of emission with prominent features from CO{sub 2} and H{sub 2}O and possible contributions from HCN and OH. We model the molecular emission and find that it originates from a massive (M ≳ 8 × 10{sup –3} M {sub ☉}), warm (T {sub ex} ≈ 500 K) and radially extended gas disk that is optically thick at infrared wavelengths. We also report less enrichment in {sup 17}O and {sup 18}O than previously found and a comparison of the Spitzer observations to earlier data obtained by the Short Wavelength Spectrometer on board the Infrared Space Observatory reveals that the CO{sub 2} flux has more than doubled in 10 yr time, indicating active and ongoing chemical evolution in the circumbinary disk. If the gas originates from interaction between the stellar wind and the dust, this suggests that the dust could be oxygen-rich in nature. The molecular gas plays a crucial role in the thermal properties of the circumbinary disk by allowing visible light to heat the dust and then trapping the infrared photons emitted by the dust. This results in higher temperatures and a more homogeneous temperature structure in the disk.

  5. A detailed picture of the origin of the Australian dingo, obtained from the study of mitochondrial DNA.

    PubMed

    Savolainen, Peter; Leitner, Thomas; Wilton, Alan N; Matisoo-Smith, Elizabeth; Lundeberg, Joakim

    2004-08-17

    To determine the origin and time of arrival to Australia of the dingo, 582 bp of the mtDNA control region were analyzed in 211 Australian dingoes sampled in all states of Australia, 676 dogs from all continents, and 38 Eurasian wolves, and 263 bp were analyzed in 19 pre-European archaeological dog samples from Polynesia. We found that all mtDNA sequences among dingoes were either identical to or differing by a single substitution from a single mtDNA type, A29. This mtDNA type, which was present in >50% of the dingoes, was found also among domestic dogs, but only in dogs from East Asia and Arctic America, whereas 18 of the 19 other types were unique to dingoes. The mean genetic distance to A29 among the dingo mtDNA sequences indicates an origin approximately 5,000 years ago. From these results a detailed scenario of the origin and history of the dingo can be derived: dingoes have an origin from domesticated dogs coming from East Asia, possibly in connection with the Austronesian expansion into Island Southeast Asia. They were introduced from a small population of dogs, possibly at a single occasion, and have since lived isolated from other dog populations. PMID:15299143

  6. Evaluating Drugs and Food Additives for Public Use: A Case Studies Approach.

    ERIC Educational Resources Information Center

    Merritt, Sheridan V.

    1980-01-01

    Described is a case study used in an introductory college biology course that provides a basis for generating debate on an issue concerning the regulation of controversial food additives and prescription drugs. The case study contained within this article deals with drug screening, specifically with information related to thalidomide. (CS)

  7. Detailed insights from microarray and crystallographic studies into carbohydrate recognition by microneme protein 1 (MIC1) of Toxoplasma gondii

    PubMed Central

    Garnett, James A; Liu, Yan; Leon, Ester; Allman, Sarah A; Friedrich, Nikolas; Saouros, Savvas; Curry, Stephen; Soldati-Favre, Dominique; Davis, Benjamin G; Feizi, Ten; Matthews, Stephen

    2009-01-01

    The intracellular protozoan Toxoplasma gondii is among the most widespread parasites. The broad host cell range of the parasite can be explained by carbohydrate microarray screening analyses that have demonstrated the ability of the T. gondii adhesive protein, TgMIC1, to bind to a wide spectrum of sialyl oligosaccharide ligands. Here, we investigate by further microarray analyses in a dose-response format the differential binding of TgMIC1 to 2-3- and 2-6-linked sialyl carbohydrates. Interestingly, two novel synthetic fluorinated analogs of 3′SiaLacNAc1–4 and 3′SiaLacNAc1–3 were identified as highly potent ligands. To understand the structural basis of the carbohydrate binding specificity of TgMIC1, we have determined the crystal structures of TgMIC1 micronemal adhesive repeat (MAR)-region (TgMIC1-MARR) in complex with five sialyl-N-acetyllactosamine analogs. These crystal structures have revealed a specific, water-mediated hydrogen bond network that accounts for the preferential binding of TgMIC1-MARR to arrayed 2-3-linked sialyl oligosaccharides and the high potency of the fluorinated analogs. Furthermore, we provide strong evidence for the first observation of a C—F···H—O hydrogen bond within a lectin-carbohydrate complex. Finally, detailed comparison with other oligosaccharide-protein complexes in the Protein Data Bank (PDB) reveals a new family of sialic-acid binding sites from lectins in parasites, bacteria, and viruses. PMID:19593815

  8. Detailed study of the plasma-activated catalytic generation of ammonia in N2-H2 plasmas

    NASA Astrophysics Data System (ADS)

    van Helden, J. H.; Wagemans, W.; Yagci, G.; Zijlmans, R. A. B.; Schram, D. C.; Engeln, R.; Lombardi, G.; Stancu, G. D.; Röpcke, J.

    2007-02-01

    We investigated the efficiency and formation mechanism of ammonia generation in recombining plasmas generated from mixtures of N2 and H2 under various plasma conditions. In contrast to the Haber-Bosch process, in which the molecules are dissociated on a catalytic surface, under these plasma conditions the precursor molecules, N2 and H2, are already dissociated in the gas phase. Surfaces are thus exposed to large fluxes of atomic N and H radicals. The ammonia production turns out to be strongly dependent on the fluxes of atomic N and H radicals to the surface. By optimizing the atomic N and H fluxes to the surface using an atomic nitrogen and hydrogen source ammonia can be formed efficiently, i.e., more than 10% of the total background pressure is measured to be ammonia. The results obtained show a strong similarity with results reported in literature, which were explained by the production of ammonia at the surface by stepwise addition reactions between adsorbed nitrogen and hydrogen containing radicals at the surface and incoming N and H containing radicals. Furthermore, our results indicate that the ammonia production is independent of wall material. The high fluxes of N and H radicals in our experiments result in a passivated surface, and the actual chemistry, leading to the formation of ammonia, takes place in an additional layer on top of this passivated surface.

  9. Study raises questions about measurement of 'additionality,'or maintaining domestic health spending amid foreign donations.

    PubMed

    Garg, Charu C; Evans, David B; Dmytraczenko, Tania; Izazola-Licea, José-Antonio; Tangcharoensathien, Viroj; Ejeder, Tessa Tan-Torres

    2012-02-01

    Donor nations and philanthropic organizations increasingly require that funds provided for a specific health priority such as HIV should supplement domestic spending on that priority-a concept known as "additionality." We investigated the "additionality" concept using data from Honduras, Rwanda, and Thailand, and we found that the three countries increased funding for HIV in response to increased donor funding. In contrast, the study revealed that donors, faced with increased Global Fund resources for HIV in certain countries, tended to decrease their funding for HIV or shift funds for use in non-HIV health areas. More broadly, we found many problems in the measurement and interpretation of additionality. These findings suggest that it would be preferable for donors and countries to agree on how best to use available domestic and external funds to improve population health, and to develop better means of tracking outcomes, than to try to develop more sophisticated methods to track additionality.

  10. SHEEP MOUNTAIN WILDERNESS STUDY AREA AND CUCAMONGA WILDERNESS AND ADDITIONS, CALIFORNIA.

    USGS Publications Warehouse

    Evans, James G.; Ridenour, James

    1984-01-01

    The Sheep Mountain Wilderness Study Area and Cucamonga Wilderness and additions encompass approximately 104 sq mi of the eastern San Gabriel Mountains, Los Angeles and San Bernardino Counties, California. A mineral survey indicates areas of probable and substantiated tungsten and gold resource potential for parts of the Sheep Mountain Wilderness Study Area and an area of probable tungsten and gold resource potential in the Cucamonga Wilderness and additions. The rugged topography, withdrawal of lands from mineral entry to protect watershed, and restricted entry of lands during periods of high fire danger have contributed to the continuing decline in mineral exploration. The geologic setting precludes the presence of energy resources.

  11. Influence of Polarization on Carbohydrate Hydration: A Comparative Study Using Additive and Polarizable Force Fields.

    PubMed

    Pandey, Poonam; Mallajosyula, Sairam S

    2016-07-14

    Carbohydrates are known to closely modulate their surrounding solvent structures and influence solvation dynamics. Spectroscopic investigations studying far-IR regions (below 1000 cm(-1)) have observed spectral shifts in the libration band (around 600 cm(-1)) of water in the presence of monosaccharides and polysaccharides. In this paper, we use molecular dynamics simulations to gain atomistic insight into carbohydrate-water interactions and to specifically highlight the differences between additive (nonpolarizable) and polarizable simulations. A total of six monosaccharide systems, α and β anomers of glucose, galactose, and mannose, were studied using additive and polarizable Chemistry at HARvard Macromolecular Mechanics (CHARMM) carbohydrate force fields. Solvents were modeled using three additive water models TIP3P, TIP4P, and TIP5P in additive simulations and polarizable water model SWM4 in polarizable simulations. The presence of carbohydrate has a significant effect on the microscopic water structure, with the effects being pronounced for proximal water molecules. Notably, disruption of the tetrahedral arrangement of proximal water molecules was observed due to the formation of strong carbohydrate-water hydrogen bonds in both additive and polarizable simulations. However, the inclusion of polarization resulted in significant water-bridge occupancies, improved ordered water structures (tetrahedral order parameter), and longer carbohydrate-water H-bond correlations as compared to those for additive simulations. Additionally, polarizable simulations also allowed the calculation of power spectra from the dipole-dipole autocorrelation function, which corresponds to the IR spectra. From the power spectra, we could identify spectral signatures differentiating the proximal and bulk water structures, which could not be captured from additive simulations. PMID:27266974

  12. A Detailed Summary of the Oregon and Stanford Studies of Team-Organized Elementary Schools, circa 1970. Project MITT.

    ERIC Educational Resources Information Center

    Charters, W. W., Jr.

    This report summarizes two studies conducted during the late 1960s on effects of team instructional organization upon elementary teachers' decision-making influence in educational affairs and their job satisfaction. The first study, by University of Oregon researchers, compared interview and questionnaire data from Wisconsin teachers in four…

  13. Crowdsourcing detailed flood data

    NASA Astrophysics Data System (ADS)

    Walliman, Nicholas; Ogden, Ray; Amouzad*, Shahrzhad

    2015-04-01

    Over the last decade the average annual loss across the European Union due to flooding has been 4.5bn Euros, but increasingly intense rainfall, as well as population growth, urbanisation and the rising costs of asset replacements, may see this rise to 23bn Euros a year by 2050. Equally disturbing are the profound social costs to individuals, families and communities which in addition to loss of lives include: loss of livelihoods, decreased purchasing and production power, relocation and migration, adverse psychosocial effects, and hindrance of economic growth and development. Flood prediction, management and defence strategies rely on the availability of accurate information and flood modelling. Whilst automated data gathering (by measurement and satellite) of the extent of flooding is already advanced it is least reliable in urban and physically complex geographies where often the need for precise estimation is most acute. Crowdsourced data of actual flood events is a potentially critical component of this allowing improved accuracy in situations and identifying the effects of local landscape and topography where the height of a simple kerb, or discontinuity in a boundary wall can have profound importance. Mobile 'App' based data acquisition using crowdsourcing in critical areas can combine camera records with GPS positional data and time, as well as descriptive data relating to the event. This will automatically produce a dataset, managed in ArcView GIS, with the potential for follow up calls to get more information through structured scripts for each strand. Through this local residents can provide highly detailed information that can be reflected in sophisticated flood protection models and be core to framing urban resilience strategies and optimising the effectiveness of investment. This paper will describe this pioneering approach that will develop flood event data in support of systems that will advance existing approaches such as developed in the in the UK

  14. Studies of detailed biofilm characterization on fly ash concrete in comparison with normal and superplasticizer concrete in seawater environments.

    PubMed

    Vishwakarmaa, Vinita; George, R P; Ramachandran, D; Anandkumar, B; Mudalib, U Kamachi

    2014-01-01

    In cooling water systems, many concrete structures in the form of tanks, pillars and reservoirs that come in contact with aggressive seawater are being deteriorated by chemical and biological factors. The nuclear industry has decided to partially replace the Portland cement with appropriate pozzolans such as fly ash, which could densify the matrix and make the concrete impermeable. Three types of concrete mixes, viz., normal concrete (NC), concrete with fly ash and superplasticizer (FA) and concrete with only superplasticizer (SP) were fabricated for short- and long-term exposure studies and for screening out the better concrete in seawater environments. Biofilm characterization studies and microscopic studies showed excellent performance of FA concrete compared to the other two. Laboratory exposure studies in pure cultures of Thiobacillus thiooxidans and Fusarium oxysporum were demonstrated for the inhibition of microbial growth on fly ash. Epifluorescence and scanning electron microscopic studies supported the better performance of the FA specimen. Thus, the present study clearly showed that FA concrete is less prone to biofilm formation and biodeterioration. PMID:24600839

  15. Studies of detailed biofilm characterization on fly ash concrete in comparison with normal and superplasticizer concrete in seawater environments.

    PubMed

    Vishwakarmaa, Vinita; George, R P; Ramachandran, D; Anandkumar, B; Mudalib, U Kamachi

    2014-01-01

    In cooling water systems, many concrete structures in the form of tanks, pillars and reservoirs that come in contact with aggressive seawater are being deteriorated by chemical and biological factors. The nuclear industry has decided to partially replace the Portland cement with appropriate pozzolans such as fly ash, which could densify the matrix and make the concrete impermeable. Three types of concrete mixes, viz., normal concrete (NC), concrete with fly ash and superplasticizer (FA) and concrete with only superplasticizer (SP) were fabricated for short- and long-term exposure studies and for screening out the better concrete in seawater environments. Biofilm characterization studies and microscopic studies showed excellent performance of FA concrete compared to the other two. Laboratory exposure studies in pure cultures of Thiobacillus thiooxidans and Fusarium oxysporum were demonstrated for the inhibition of microbial growth on fly ash. Epifluorescence and scanning electron microscopic studies supported the better performance of the FA specimen. Thus, the present study clearly showed that FA concrete is less prone to biofilm formation and biodeterioration.

  16. Comparative study of electrolyte additives using electrochemical impedance spectroscopy on symmetric cells

    NASA Astrophysics Data System (ADS)

    Petibon, R.; Sinha, N. N.; Burns, J. C.; Aiken, C. P.; Ye, Hui; VanElzen, Collette M.; Jain, Gaurav; Trussler, S.; Dahn, J. R.

    2014-04-01

    The effect of various electrolyte additives and additive combinations added to a 1 M LiPF6 EC:EMC electrolyte on the positive and negative electrodes surface of 1 year old wound LiCoO2/graphite cells and Li[Ni0.4Mn0.4Co0.2])O2/graphite cells was studied using electrochemical impedance spectroscopy (EIS) on symmetric cells. The additives tested were: vinylene carbonate (VC), trimethoxyboroxine (TMOBX), fluoroethylene carbonate (FEC), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and H2O alone or in combination. In general, compared to control electrolyte, the additives tested reduced the impedance of the positive electrode and increased the impedance of the negative electrode with the exception of LiTFSI in Li[Ni0.4Mn0.4Co0.2]O2/graphite wound cells. Higher charge voltage led to higher positive electrode impedance, with the exception of 2%VC + 2% FEC, and 2% LiTFSI. In some cases, some additives when mixed with another controlled the formation of the SEI at one electrode, and shared the formation of the SEI at one electrode when mixed with a different additive.

  17. An iron–oxygen intermediate formed during the catalytic cycle of cysteine dioxygenase† †Electronic supplementary information (ESI) available: Experimental and computational details. See DOI: 10.1039/c6cc03904a Click here for additional data file.

    PubMed Central

    Tchesnokov, E. P.; Faponle, A. S.; Davies, C. G.; Quesne, M. G.; Turner, R.; Fellner, M.; Souness, R. J.; Wilbanks, S. M.

    2016-01-01

    Cysteine dioxygenase is a key enzyme in the breakdown of cysteine, but its mechanism remains controversial. A combination of spectroscopic and computational studies provides the first evidence of a short-lived intermediate in the catalytic cycle. The intermediate decays within 20 ms and has absorption maxima at 500 and 640 nm. PMID:27297454

  18. Generating Scenarios of Addition and Subtraction: A Study of Japanese University Students

    ERIC Educational Resources Information Center

    Kinda, Shigehiro

    2013-01-01

    Students are presented with problems involving three scenario types of addition and subtraction in elementary mathematics: one dynamic ("Change") and two static ("Combine, Compare"). Previous studies have indicated that the dynamic type is easier for school children, whereas the static types are more difficult and comprehended only gradually…

  19. Experimental study of combustion of decane, dodecane and hexadecane with polymeric and nano-particle additives

    NASA Astrophysics Data System (ADS)

    Ghamari, Mohsen; Ratner, Albert

    2015-11-01

    Recent studies have shown that adding combustible nano-particles could have promising effects on increasing burning rate of liquid fuels. Combustible nano-particles could enhance the heat conduction and mixing within the droplet. Polymers have also higher burning rate than regular hydrocarbon fuels because of having the flame closer to the droplet surface. Therefore adding polymeric additive could have the potential to increase the burning rate. In this study, combustion of stationary fuel droplets of n-Decane, n-Dodecane and n-Hexadecane doped with different percentages of a long chain polymer and also a very fine nano carbon was examined and compared with the pure hydrocarbon behavior. In contrast with hydrocarbon droplets with no polymer addition, several zones of combustion including a slow and steady burning zone, a strong swelling zone and a final fast and fairly steady combustion zone were also detected. In addition, increasing polymer percentage resulted in a more extended swelling zone and shorter slow burning zone in addition to a shorter total burning time. Addition of nano-particles also resulted in an overall increased burning rate and shortened burning time which is due to enhanced heat conduction within the droplet.

  20. Mental addition in bilinguals: an FMRI study of task-related and performance-related activation.

    PubMed

    Lin, Jo-Fu Lotus; Imada, Toshiaki; Kuhl, Patricia K

    2012-08-01

    Behavioral studies show that bilinguals are slower and less accurate when performing mental calculation in their nondominant (second; L2) language than in their dominant (first; L1) language. However, little is known about the neural correlates associated with the performance differences observed between bilinguals' 2 languages during arithmetic processing. To address the cortical activation differences between languages, the current study examined task-related and performance-related brain activation during mental addition when problems were presented auditorily in participants' L1 and L2. Eleven Chinese-English bilinguals heard 2-digit addition problems that required exact or approximate calculations. Functional magnetic resonance imaging results showed that auditorily presented multidigit addition in bilinguals activates bilateral inferior parietal and inferior frontal regions in both L1 and L2. Language differences were observed in the form of greater activation for L2 exact addition in the left inferior frontal area. A negative correlation between brain activation and behavioral performance during mental addition in L2 was observed in the left inferior parietal area. Current results provide further evidence for the effects of language-specific experience on arithmetic processing in bilinguals at the cortical level.

  1. Studying quantum dot blinking through the addition of an engineered inorganic hole trap.

    PubMed

    Tenne, Ron; Teitelboim, Ayelet; Rukenstein, Pazit; Dyshel, Maria; Mokari, Taleb; Oron, Dan

    2013-06-25

    An all-inorganic compound colloidal quantum dot incorporating a highly emissive CdSe core, which is linked by a CdS tunneling barrier to an engineered charge carrier trap composed of PbS, is designed, and its optical properties are studied in detail at the single-particle level. Study of this structure enables a deeper understanding of the link between photoinduced charging and surface trapping of charge carriers and the phenomenon of quantum dot blinking. In the presence of the hole trap, a "gray" emissive state appears, associated with charging of the core. Rapid switching is observed between the "on" and the "gray" state, although the switching dynamics in and out of the dark "off" state remain unaffected. This result completes the links in the causality chain connecting charge carrier trapping, charging of QDs, and the appearance of a "gray" emission state.

  2. Detailed Review of Rogers' Diffusion of Innovations Theory and Educational Technology-Related Studies Based on Rogers' Theory

    ERIC Educational Resources Information Center

    Sahin, Ismail

    2006-01-01

    The process of adopting new innovations has been studied for over 30 years, and one of the most popular adoption models is described by Rogers in his book, "Diffusion of Innovations" (Sherry & Gibson, 2002). Much research from a broad variety of disciplines has used the model as a framework. Dooley (1999) and Stuart (2000) mentioned several of…

  3. Detailed Review of Rogers' Diffusion of Innovations Theory and Educational Technology-Related Studies Based on Rogers' Theory

    ERIC Educational Resources Information Center

    Sahin, Ismail

    2006-01-01

    The process of adopting new innovations has been studied for over 30 years, and one of the most popular adoption models is described by Rogers in his book, "Diffusion of Innovations" (Sherry & Gibson, 2002). Much research from a broad variety of disciplines has used the model as a framework. Dooley (1999) and Stuart (2000) mentioned…

  4. Sequential neural processes in abacus mental addition: an EEG and FMRI case study.

    PubMed

    Ku, Yixuan; Hong, Bo; Zhou, Wenjing; Bodner, Mark; Zhou, Yong-Di

    2012-01-01

    Abacus experts are able to mentally calculate multi-digit numbers rapidly. Some behavioral and neuroimaging studies have suggested a visuospatial and visuomotor strategy during abacus mental calculation. However, no study up to now has attempted to dissociate temporally the visuospatial neural process from the visuomotor neural process during abacus mental calculation. In the present study, an abacus expert performed the mental addition tasks (8-digit and 4-digit addends presented in visual or auditory modes) swiftly and accurately. The 100% correct rates in this expert's task performance were significantly higher than those of ordinary subjects performing 1-digit and 2-digit addition tasks. ERPs, EEG source localizations, and fMRI results taken together suggested visuospatial and visuomotor processes were sequentially arranged during the abacus mental addition with visual addends and could be dissociated from each other temporally. The visuospatial transformation of the numbers, in which the superior parietal lobule was most likely involved, might occur first (around 380 ms) after the onset of the stimuli. The visuomotor processing, in which the superior/middle frontal gyri were most likely involved, might occur later (around 440 ms). Meanwhile, fMRI results suggested that neural networks involved in the abacus mental addition with auditory stimuli were similar to those in the visual abacus mental addition. The most prominently activated brain areas in both conditions included the bilateral superior parietal lobules (BA 7) and bilateral middle frontal gyri (BA 6). These results suggest a supra-modal brain network in abacus mental addition, which may develop from normal mental calculation networks.

  5. Detailed Experimental Study of Ion Acceleration by Interaction of an Ultra-Short Intense Laser with an Underdense Plasma

    NASA Astrophysics Data System (ADS)

    Kahaly, S.; Sylla, F.; Lifschitz, A.; Flacco, A.; Veltcheva, M.; Malka, V.

    2016-08-01

    Ion acceleration from intense (Iλ2 > 1018 Wcm‑2 μm2) laser-plasma interaction is experimentally studied within a wide range of He gas densities. Focusing an ultrashort pulse (duration  ion plasma period) on a newly designed submillimetric gas jet system, enabled us to inhibit total evacuation of electrons from the central propagation channel reducing the radial ion acceleration associated with ponderomotive Coulomb explosion, a mechanism predominant in the long pulse scenario. New ion acceleration mechanism have been unveiled in this regime leading to non-Maxwellian quasi monoenergetic features in the ion energy spectra. The emitted nonthermal ion bunches show a new scaling of the ion peak energy with plasma density. The scaling identified in this new regime differs from previously reported studies.

  6. Detailed Experimental Study of Ion Acceleration by Interaction of an Ultra-Short Intense Laser with an Underdense Plasma

    PubMed Central

    Kahaly, S.; Sylla, F.; Lifschitz, A.; Flacco, A.; Veltcheva, M.; Malka, V.

    2016-01-01

    Ion acceleration from intense (Iλ2 > 1018 Wcm−2 μm2) laser-plasma interaction is experimentally studied within a wide range of He gas densities. Focusing an ultrashort pulse (duration  ion plasma period) on a newly designed submillimetric gas jet system, enabled us to inhibit total evacuation of electrons from the central propagation channel reducing the radial ion acceleration associated with ponderomotive Coulomb explosion, a mechanism predominant in the long pulse scenario. New ion acceleration mechanism have been unveiled in this regime leading to non-Maxwellian quasi monoenergetic features in the ion energy spectra. The emitted nonthermal ion bunches show a new scaling of the ion peak energy with plasma density. The scaling identified in this new regime differs from previously reported studies. PMID:27531755

  7. Horizontal Cross Bracing Detail, Vertical Cross Bracing Detail, Horizontal Cross ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Horizontal Cross Bracing Detail, Vertical Cross Bracing Detail, Horizontal Cross Bracing Detail, Vertical Cross Bracing-End Detail - Cumberland Covered Bridge, Spanning Mississinewa River, Matthews, Grant County, IN

  8. A detailed study of the hysteresis in La0.67Ca0.33MnO3

    NASA Astrophysics Data System (ADS)

    Bez, Henrique N.; Nielsen, Kaspar K.; Smith, Anders; Bahl, Christian R. H.

    2016-10-01

    We report a thorough study of the thermal hysteretic behaviour of a single phase sample of the magnetocaloric material La0.67Ca0.33MnO3. Previous reports in the literature have variously found hysteretic and non-hysteretic behaviour. We show the importance of measuring under carefully defined heating and cooling procedures. Careful analysis of the specific heat, measured at five different temperature ramp rates, and the magnetic entropy change indicates that there is no observable hysteresis, even though the behaviour of both quantities is consistent with a first-order phase transition. We discuss the reasons for this and for the differing results previously found.

  9. Microstructural Study Of Zinc Hot Dip Galvanized Coatings with Titanium Additions In The Zinc Melt

    NASA Astrophysics Data System (ADS)

    Konidaris, S.; Pistofidis, N.; Vourlias, G.; Pavlidou, E.; Stergiou, A.; Stergioudis, G.; Polychroniadis, E. K.

    2007-04-01

    Zinc hot-dip galvanizing is a method for protecting iron and steel against corrosion. Galvanizing with pure Zn or Zn with additions like Ni, Al, Pb and Bi has been extensively studied, but there is a lack of scientific information about other additions. The present work examines the effect of a 0.5 wt% Ti addition in the Zn melt. The samples were exposed to accelerated corrosion in a salt spray chamber (SSC). The microstructure and chemical composition of the coatings were determined by Optical Microscopy, XRD and SEM associated with an EDS Analyzer. The results indicate that the coatings have a typical morphology, while Zn-Ti phases were also detected.

  10. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy.

    PubMed

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-01-01

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys. PMID:26446425

  11. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    SciTech Connect

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-10-08

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. In conclusion, the observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.

  12. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    PubMed Central

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-01-01

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused by a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. The observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys. PMID:26446425

  13. The effect of UV intensities and curing time on polymer dispersed liquid crystal (PDLC) display: A detailed analysis study

    NASA Astrophysics Data System (ADS)

    Ahmad, Farzana; Jamil, Muhammad; Lee, Jin Woo; Kim, Seo Rok; Jeon, Young Jae

    2016-08-01

    In current study polymer dispersed liquid crystal (PDLC) films whose composition based on nematic liquid crystal (LC) E7 and prepolymeric NOA65 were formed via the photo induced phase separation method, in a wide intensity range of the UV light (I = 0.33-1.8 mW/cm2) and curing duration (t = 120-600 sec). The PDLC characteristics were monitored by surface morphology, electro optical studies, as well as by phase separation process through measuring the FTIR absorption of the composite layers. Increase of curing light intensity accelerates the phase separation and drastically influences the final morphology of LC droplets inside PDLCs. Likewise by widening the curing duration the enhancement in phase separation was observed. Increase of light intensity from 0.89 mW/cm2 and duration t = 120-240 sec resulted into transition from large LC domains of irregular shape (due to aggregation of droplets) to fine mono dispersed LC droplets. This morphology caused increase in optical scattering on zero voltage and high driving voltage. However unexpectedly, this response was not directly related with the curing conditions (intensity and time). These findings extend the potential applications of thiol-ene based PDLCs. [Figure not available: see fulltext.

  14. The effect of UV intensities and curing time on polymer dispersed liquid crystal (PDLC) display: A detailed analysis study

    NASA Astrophysics Data System (ADS)

    Ahmad, Farzana; Jamil, Muhammad; Lee, Jin Woo; Kim, Seo Rok; Jeon, Young Jae

    2016-09-01

    In current study polymer dispersed liquid crystal (PDLC) films whose composition based on nematic liquid crystal (LC) E7 and prepolymeric NOA65 were formed via the photo induced phase separation method, in a wide intensity range of the UV light ( I = 0.33-1.8 mW/cm2) and curing duration ( t = 120-600 sec). The PDLC characteristics were monitored by surface morphology, electro optical studies, as well as by phase separation process through measuring the FTIR absorption of the composite layers. Increase of curing light intensity accelerates the phase separation and drastically influences the final morphology of LC droplets inside PDLCs. Likewise by widening the curing duration the enhancement in phase separation was observed. Increase of light intensity from 0.89 mW/cm2 and duration t = 120-240 sec resulted into transition from large LC domains of irregular shape (due to aggregation of droplets) to fine mono dispersed LC droplets. This morphology caused increase in optical scattering on zero voltage and high driving voltage. However unexpectedly, this response was not directly related with the curing conditions (intensity and time). These findings extend the potential applications of thiol-ene based PDLCs.

  15. Numerical study of the effect of water addition on gas explosion.

    PubMed

    Liang, Yuntao; Zeng, Wen

    2010-02-15

    Through amending the SENKIN code of CHEMKIN III chemical kinetics package, a computational model of gas explosion in a constant volume bomb was built, and the detailed reaction mechanism (GRI-Mech 3.0) was adopted. The mole fraction profiles of reactants, some selected free radicals and catastrophic gases in the process of gas explosion were analyzed by this model. Furthermore, through the sensitivity analysis of the reaction mechanism of gas explosion, the dominant reactions that affect gas explosion and the formation of catastrophic gases were found out. At the same time, the inhibition mechanisms of water on gas explosion and the formation of catastrophic gases were analyzed. The results show that the induced explosion time is prolonged, and the mole fractions of reactant species such as CH(4), O(2) and catastrophic gases such as CO, CO(2) and NO are decreased as water is added to the mixed gas. With the water fraction in the mixed gas increasing, the sensitivities of the dominant reactions contributing to CH(4), CO(2) are decreased and the sensitivity coefficients of CH(4), CO and NO mole fractions are also decreased. The inhibition of gas explosion with water addition can be ascribed to the significant decrease of H, O and OH in the process of gas explosion due to the water presence. PMID:19811873

  16. Summary of Previous Chamber or Controlled Anthrax Studies and Recommendations for Possible Additional Studies

    SciTech Connect

    Piepel, Gregory F.; Amidan, Brett G.; Morrow, Jayne B.

    2010-12-29

    This report and an associated Excel file(a) summarizes the investigations and results of previous chamber and controlled studies(b) to characterize the performance of methods for collecting, storing and/or transporting, extracting, and analyzing samples from surfaces contaminated by Bacillus anthracis (BA) or related simulants. This report and the Excel are the joint work of the Pacific Northwest National Laboratory (PNNL) and the National Institute of Standards and Technology (NIST) for the Department of Homeland Security, Science and Technology Directorate. The report was originally released as PNNL-SA-69338, Rev. 0 in November 2009 with limited distribution, but was subsequently cleared for release with unlimited distribution in this Rev. 1. Only minor changes were made to Rev. 0 to yield Rev. 1. A more substantial update (including summarizing data from other studies and more condensed summary tables of data) is underway

  17. Studies of levels of biogenic amines in meat samples in relation to the content of additives.

    PubMed

    Jastrzębska, Aneta; Kowalska, Sylwia; Szłyk, Edward

    2016-01-01

    The impact of meat additives on the concentration of biogenic amines and the quality of meat was studied. Fresh white and red meat samples were fortified with the following food additives: citric and lactic acids, disodium diphosphate, sodium nitrite, sodium metabisulphite, potassium sorbate, sodium chloride, ascorbic acid, α-tocopherol, propyl 3,4,5-trihydroxybenzoate (propyl gallate) and butylated hydroxyanisole. The content of spermine, spermidine, putrescine, cadaverine, histamine, tyramine, tryptamine and 2-phenylethylamine was determined by capillary isotachophoretic methods in meat samples (fresh and fortified) during four days of storage at 4°C. The results were applied to estimate the impact of the tested additives on the formation of biogenic amines in white and red meat. For all tested meats, sodium nitrite, sodium chloride and disodium diphosphate showed the best inhibition. However, cadaverine and putrescine were characterised by the biggest changes in concentration during the storage time of all the additives. Based on the presented data for the content of biogenic amines in meat samples analysed as a function of storage time and additives, we suggest that cadaverine and putrescine have a significant impact on meat quality. PMID:26515667

  18. Studies of levels of biogenic amines in meat samples in relation to the content of additives.

    PubMed

    Jastrzębska, Aneta; Kowalska, Sylwia; Szłyk, Edward

    2016-01-01

    The impact of meat additives on the concentration of biogenic amines and the quality of meat was studied. Fresh white and red meat samples were fortified with the following food additives: citric and lactic acids, disodium diphosphate, sodium nitrite, sodium metabisulphite, potassium sorbate, sodium chloride, ascorbic acid, α-tocopherol, propyl 3,4,5-trihydroxybenzoate (propyl gallate) and butylated hydroxyanisole. The content of spermine, spermidine, putrescine, cadaverine, histamine, tyramine, tryptamine and 2-phenylethylamine was determined by capillary isotachophoretic methods in meat samples (fresh and fortified) during four days of storage at 4°C. The results were applied to estimate the impact of the tested additives on the formation of biogenic amines in white and red meat. For all tested meats, sodium nitrite, sodium chloride and disodium diphosphate showed the best inhibition. However, cadaverine and putrescine were characterised by the biggest changes in concentration during the storage time of all the additives. Based on the presented data for the content of biogenic amines in meat samples analysed as a function of storage time and additives, we suggest that cadaverine and putrescine have a significant impact on meat quality.

  19. A detailed perceptive on the growth and characterization studies of para amino hippuric acid (PAHA) single crystals

    NASA Astrophysics Data System (ADS)

    Sathesh Kumar, K.; Srinivasan, P.; Mahadevan Pillai, V. P.

    2014-11-01

    Single crystals of para amino hippuric acid (PAHA) were grown by slow evaporation technique. The spectral and its structural properties of the crystals were studied by FT-IR, micro-Raman and factor group analysis. The optical transparency in the UV-Visible regions was found to be good for non-linear optics (NLO) applications. Thermogravimetric analysis (TGA) and Differential Thermal Analysis (DTA) showed that the compound decomposes beyond 300 °C. The dielectric behavior of the compound predicts low dielectric loss at high frequency applied whereas in the case of mechanical behavior of the specimen hardness increases with increasing applied load. After certain weight increase, hardness gets saturated in the region of ⩾110. Relative second harmonic efficiency of the compound is found to be 1.8 times greater than that of potassium di-phosphate reference.

  20. A detailed study on the transition from the blocked to the superparamagnetic state of reduction-precipitated iron oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Witte, K.; Bodnar, W.; Mix, T.; Schell, N.; Fulda, G.; Woodcock, T. G.; Burkel, E.

    2016-04-01

    Magnetic iron oxide nanoparticles were prepared by salt-assisted solid-state chemical precipitation method with alternating fractions of the ferric iron content. The physical properties of the precipitated nanoparticles mainly consisting of magnetite were investigated by means of transmission electron microscopy, high energy X-ray diffraction, vibrating sample magnetometry and Mössbauer spectroscopy. With particle sizes ranging from 16.3 nm to 2.1 nm, a gradual transition from the blocked state to the superparamagnetic state was observed. The transition was described as a dependence of the ferric iron content used during the precipitation. Composition, mean particle size, coercivity, saturation polarisation, as well as hyperfine interaction parameters and their evolution were studied systematically over the whole series of iron oxide nanoparticles.

  1. Chemical Data for Detailed Studies of Irrigation Drainage in the Salton Sea Area, California, 1995?2001

    USGS Publications Warehouse

    Schroeder, Roy A.

    2004-01-01

    The primary purpose of this report is to present all chemical data from the Salton Sea area collected by the U.S. Geological Survey between 1995 and 2001. The data were collected primarily for the Department of the Interior's National Irrigation Water Quality Program (NIWQP). The report also contains a brief summary and citation to investigations done for the NIWQP between 1992 and 1995. The NIWQP began studies in the Salton Sea area in 1986 to evaluate effects on the environment from potential toxins, especially selenium, in irrigation-induced drainage. This data report is a companion to several reports published from the earlier studies and to interpretive publications that make use of historical and recent data from this area. Data reported herein are from five collection studies. Water, bottom material, and suspended sediment collected in 1995-96 from the New River, the lower Colorado River, and the All-American Canal were analyzed for elements, semi-volatile (extractable) organic compounds, and organochlorine compounds. Sufficient suspended sediment for chemical analyses was obtained by tangential-flow filtration. A grab sample of surficial bottom sediment collected from near the deepest part of the Salton Sea in 1996 was analyzed for 44 elements and organic and inorganic carbon. High selenium concentration confirmed the effective transfer (sequestration) of selenium into the bottom sediment. Similar grab samples were collected 2 years later (1998) from 11 locations in the Salton Sea and analyzed for elements, as before, and also for nutrients, organochlorine compounds, and polycyclic aromatic hydrocarbons. Nutrients were measured in bottom water, and water-column profiles were obtained for pH, conductance, temperature, and dissolved oxygen. Element and nutrient concentrations were obtained in 1999 from cores at 2 of the above 11 sites, in the north subbasin of the Salton Sea. The most-recent study reported herein was done in 2001 and contains element data on

  2. A detailed perceptive on the growth and characterization studies of para amino hippuric acid (PAHA) single crystals.

    PubMed

    Sathesh Kumar, K; Srinivasan, P; Mahadevan Pillai, V P

    2014-11-11

    Single crystals of para amino hippuric acid (PAHA) were grown by slow evaporation technique. The spectral and its structural properties of the crystals were studied by FT-IR, micro-Raman and factor group analysis. The optical transparency in the UV-Visible regions was found to be good for non-linear optics (NLO) applications. Thermogravimetric analysis (TGA) and Differential Thermal Analysis (DTA) showed that the compound decomposes beyond 300°C. The dielectric behavior of the compound predicts low dielectric loss at high frequency applied whereas in the case of mechanical behavior of the specimen hardness increases with increasing applied load. After certain weight increase, hardness gets saturated in the region of ≥110. Relative second harmonic efficiency of the compound is found to be 1.8 times greater than that of potassium di-phosphate reference.

  3. Synthesis of Stable Diarylpalladium(II) Complexes: Detailed Study of the Aryl-Aryl Bond-Forming Reductive Elimination.

    PubMed

    Gensch, Tobias; Richter, Nils; Theumer, Gabriele; Kataeva, Olga; Knölker, Hans-Joachim

    2016-08-01

    The synthesis of diarylpalladium(II) complexes by twofold aryl C-H bond activation was developed. These intermediates of oxidative cyclization reactions are stabilized by chelation with acetyl groups while still maintaining sufficient reactivity to study their reductive elimination. Four distinct triggers were found for the reductive elimination of these complexes to dibenzofurans and carbazoles. Thermal elimination occurs at very high temperatures, whereas ligand-promoted and oxidatively induced reductive eliminations proceed readily at room temperature. Under these conditions, no isomerization occurs. In contrast, weak Brønsted acids, such as acetic acid, lead to a sequence of proto-demetalation, isomerization to a κ(3) -diarylpalladium(II) complex, and reductive elimination to non-symmetrical cyclization products.

  4. Protective effect of curcumin on experimentally induced arthritic rats: detailed histopathological study of the joints and white blood cell count.

    PubMed

    Kamarudin, Taty Anna; Othman, Faizah; Mohd Ramli, Elvy Suhana; Md Isa, Nurismah; Das, Srijit

    2012-01-01

    Curcuma longa (turmeric) rhizomes contains curcumin, an active compound which possesses anti-inflammatory effects. Collagen-induced arthritis (CIA) is an accepted experimental animal model of rheumatoid arthritis. The present study aimed to observe the histological changes in the joints of experimental arthritic rats treated with curcumin. Twenty four male Sprague-Dawley (approximately 7 weeks-old) rats were randomly divided into four groups. Three groups were immunized with 150 µg collagen. All rats with established CIA, with arthritis scores exceeding 1, were orally treated with betamethasone (0.5 mg/ml/kg body weight), curcumin (110 mg/ml/kg body weight) or olive oil (1.0 ml/kg body weight) daily, for two weeks. One remaining group was kept as normal control. Treatment with 110 mg/ml/kg curcumin showed significant mean differences in the average white blood cell (WBC) count (p<0.05), cell infiltration, bone and cartilage erosion scores (p<0.05) compared to the olive oil treated group. Pannus formation scores showed that curcumin supplementation successfully suppressed the pannus formation process that occurred in the articular cartilage of the CIA joints. The mean difference for histological scores for the curcumin group was insignificant compared to the betamethasone treated group. It is concluded that supplementation of curcumin has protective effect on the histopathological and degenerative changes in the joints of CIA rats which was at par with betamethasone. PMID:27366139

  5. Basic electrotonic properties of primate pallidal neurons as inferred from a detailed analysis of their morphology: a modeling study.

    PubMed

    Mouchet, Patrick; Yelnik, Jerome

    2004-10-01

    We used a biophysical model to gain insight into the electrotonic properties of primate pallidal neurons. The model was built from the quantitative morphological analysis of internal (GPi) and external (GPe) pallidal neurons, labeled with biocytin filling or Golgi staining. Simulations showed a strong location dependence of the efficacy of single fast excitatory synaptic inputs, synaptic efficacy being the peak amplitude of somatic postsynaptic potentials (PPSs) evoked from dendritic sites. It markedly decreased with distance from the soma. The efficacy was also dependent on the dendritic branch order. At identical distances from the soma, there were no differences between the mean efficacy of GPi and GPe dendritic synaptic sites. However, the attenuation of the propagated PPSs was higher in GPi dendrites. This difference resulted from the smaller mean diameters of GPi dendrites. Diameters were also shown to often maximize the distal sites efficacy. A clear distance dependence was also found when simulating GABA(A) inhibitory activations. It was weaker than the one observed with fast excitatory PPSs. It is proposed that this difference could constitute a simple basis to create opposing center-surround patterns of activity in the basal ganglia output. In conclusion, this study suggests that GPi and GPe neurons have very similar electrotonic properties and that in such passive conditions all parts of their long dendrites significantly influence the somatic membrane potential. It suggests also that in spite of this similarity, neurons of the two pallidal segments differ in the way they integrate their synaptic inputs. PMID:15300880

  6. CO2 formation on interstellar dust grains: a detailed study of the barrier of the CO + O channel

    NASA Astrophysics Data System (ADS)

    Minissale, M.; Congiu, E.; Manicò, G.; Pirronello, V.; Dulieu, F.

    2013-11-01

    Context. The formation of carbon dioxide in quiescent regions of molecular clouds has not yet been fully understood, even though CO2 is one of the most abundant species in interstellar ices. Aims: CO2 formation is studied via oxidation of CO molecules on cold surfaces under conditions close to those encountered in quiescent molecular clouds. Methods: Carbon monoxide and oxygen atoms are codeposited using two differentially pumped beam lines on two different surfaces (amorphous water ice or oxydized graphite) held at given temperatures between 10 and 60 K. The products are probed via mass spectroscopy by using the temperature-programmed desorption technique. Results: We show that the reaction CO + O can form carbon dioxide in solid phase with an efficiency that depends on the temperature of the surface. The activation barrier for the reaction, based on modelling results, is estimated to be in the range of 780-475 K/kb. Our model also allows us to distinguish the mechanisms (Eley Rideal or Langmuir-Hinshelwood) at play in different temperature regimes. Our results suggest that competition between CO2 formation via CO + O and other surface reactions of O is a key factor in the yields of CO2 obtained experimentally. Conclusions: CO2 can be formed by the CO + O reaction on cold surfaces via processes that mimic carbon dioxide formation in the interstellar medium. Astrophysically, the presence of CO2 in quiescent molecular clouds could be explained by the reaction CO + O occurring on interstellar dust grains.

  7. NOSS Altimeter Detailed Algorithm specifications

    NASA Technical Reports Server (NTRS)

    Hancock, D. W.; Mcmillan, J. D.

    1982-01-01

    The details of the algorithms and data sets required for satellite radar altimeter data processing are documented in a form suitable for (1) development of the benchmark software and (2) coding the operational software. The algorithms reported in detail are those established for altimeter processing. The algorithms which required some additional development before documenting for production were only scoped. The algorithms are divided into two levels of processing. The first level converts the data to engineering units and applies corrections for instrument variations. The second level provides geophysical measurements derived from altimeter parameters for oceanographic users.

  8. Diaryl- and triaryl-pyrrole derivatives: inhibitors of the MDM2-p53 and MDMX-p53 protein-protein interactions†Electronic supplementary information (ESI) available: Experimental details for compound synthesis, analytical data for all compounds and intermediates. Details for the biological evaluation. Further details for the modeling. Table of combustion analysis data. See DOI: 10.1039/c3md00161jClick here for additional data file.

    PubMed

    Blackburn, Tim J; Ahmed, Shafiq; Coxon, Christopher R; Liu, Junfeng; Lu, Xiaohong; Golding, Bernard T; Griffin, Roger J; Hutton, Claire; Newell, David R; Ojo, Stephen; Watson, Anna F; Zaytzev, Andrey; Zhao, Yan; Lunec, John; Hardcastle, Ian R

    2013-09-21

    Screening identified 2-(3-((4,6-dioxo-2-thioxotetrahydropyrimidin-5(2H)-ylidene)methyl)-2,5-dimethyl-1H-pyrrol-1-yl)-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carbonitrile as an MDM2-p53 inhibitor (IC50 = 12.3 μM). MDM2-p53 and MDMX-p53 activity was seen for 5-((1-(4-chlorophenyl)-2,5-diphenyl-1H-pyrrol-3-yl)methylene)-2-thioxodihydropyrimidine-4,6(1H,5H)-dione (MDM2 IC50 = 0.11 μM; MDMX IC50 = 4.2 μM) and 5-((1-(4-nitrophenyl)-2,5-diphenyl-1H-pyrrol-3-yl)methylene)pyrimidine-2,4,6(1H,3H,5H)-trione (MDM2 IC50 = 0.15 μM; MDMX IC50 = 4.2 μM), and cellular activity consistent with p53 activation in MDM2 amplified cells. Further SAR studies demonstrated the requirement for the triarylpyrrole moiety for MDMX-p53 activity but not for MDM2-p53 inhibition.

  9. A Study of Aluminum Combustion in Solids, Powders, Foams, Additively-Manufactured Lattices, and Composites

    NASA Astrophysics Data System (ADS)

    Black, James; Trammell, Norman; Batteh, Jad; Curran, Nicholas; Rogers, John; Littrell, Donald

    2015-06-01

    This study examines the fireball characteristics, blast parameters, and combustion efficiency of explosively-shocked aluminum-based materials. The materials included structural and non-structural aluminum forms - such as solid cylinders, foams, additively-manufactured lattices, and powders - and some polytetrafluoroethylene-aluminum (PTFE-Al) composites. The materials were explosively dispersed in a small blast chamber, and the blast properties and products were measured with pressure transducers, thermocouples, slow and fast ultraviolet/visible spectrometers, and high-speed video.

  10. Spectra-temporal patterns underlying mental addition: an ERP and ERD/ERS study.

    PubMed

    Ku, Yixuan; Hong, Bo; Gao, Xiaorong; Gao, Shangkai

    2010-03-12

    Functional neuroimaging data have shown that mental calculation involves fronto-parietal areas that are composed of different subsystems shared with other cognitive functions such as working memory and language. Event-related potential (ERP) analysis has also indicated sequential information changes during the calculation process. However, little is known about the dynamic properties of oscillatory networks in this process. In the present study, we applied both ERP and event-related (de-)synchronization (ERS/ERD) analyses to EEG data recorded from normal human subjects performing tasks for sequential visual/auditory mental addition. Results in the study indicate that the late positive components (LPCs) can be decomposed into two separate parts. The earlier element LPC1 (around 360ms) reflects the computing attribute and is more prominent in calculation tasks. The later element LPC2 (around 590ms) indicates an effect of number size and appears larger only in a more complex 2-digit addition task. The theta ERS and alpha ERD show modality-independent frontal and parietal differential patterns between the mental addition and control groups, and discrepancies are noted in the beta ERD between the 2-digit and 1-digit mental addition groups. The 2-digit addition (both visual and auditory) results in similar beta ERD patterns to the auditory control, which may indicate a reliance on auditory-related resources in mental arithmetic, especially with increasing task difficulty. These results coincide with the theory of simple calculation relying on the visuospatial process and complex calculation depending on the phonological process. PMID:20105450

  11. Detailed finite element analysis and preliminary study of the effects of friction and fastener pre-tension on the mechanical behavior of fastened built-up members

    NASA Astrophysics Data System (ADS)

    Bonachera Martin, Francisco Javier

    The characterization of fatigue resistance is one of the main concerns in structural engineering, a concern that is particularly important in the evaluation of existing bridge members designed or erected before the development of fatigue design provisions. The ability of a structural member to develop alternate load paths after the failure of a component is known as member-level or internal redundancy. In fastened built-up members, these alternate load paths are affected by the combination of fastener pre-tension and friction between the structural member components in contact. In this study, a finite element methodology to model and analyze riveted and bolted built-up members was developed in ABAQUS and validated with experimental results. This methodology was used to created finite element models of three fastened plates subjected to tension, in which the middle plate had failed, in order to investigate the fundamental effects of combined fastener pre-tension and friction on their mechanical behavior. Detailed finite element models of riveted and bolted built-up flexural members were created and analyze to understand the effect of fastener pre-tension in member-level redundancy and resistance to fatigue and fracture. The obtained results showed that bolted members are able to re-distribute a larger portion of the load away from the failing component into the rest of the member than riveted members, and that this transfer of load also took place over a smaller length. Superior pre-tension of bolts, in comparison to rivets, results in larger frictional forces that develop at the contact interfaces between components and constitute additional alternate load paths that increase member-level redundancy which increase the fatigue and fracture resistance of the structural member during the failure of one of its components. Although fatigue and fracture potential may be mitigated by compressive stresses developing around the fastener hole due to fastener pre-tension, it

  12. Effect of Exogenous Phytase Addition on Soil Phosphatase Activities: a Fluorescence Spectroscopy Study.

    PubMed

    Yang, Xiao-zhu; Chen, Zhen-hua; Zhang, Yu-lan; Chen, Li-jun

    2015-05-01

    The utilization of organic phosphorus (P) has directly or indirectly improved after exogenous phytase was added to soil. However, the mechanism by which exogenous phytase affected the soil phosphatases (phosphomonoesterase and phosphodiesterase) activities was not clear. The present work was aimed to study red soil, brown soil and cinnamon soil phosphomonoesterase (acid and alkaline) (AcP and AlP) and phosphodiesterase (PD) activities responding to the addition of exogenous phytase (1 g phytase/50 g air dry soil sample) based on the measurements performed via a fluorescence detection method combined with 96 microplates using a TECAN Infinite 200 Multi-Mode Microplate Reader. The results indicated that the acid phosphomonoesterase activity was significantly enhanced in red soil (p≤0. 01), while it was significantly reduced in cinnamon soil; alkaline phosphomonoesterase activity was significantly enhanced in cinnamon soil (p≤ 0. 01), while it was significantly reduced in red soil; phosphodiesterase activity was increased in three soils but it was significantly increased in brown soil (p≤0. 01) after the addition of exogenous phytase. The activities still remained strong after eight days in different soils, which indicated that exogenous phytase addition could be enhance soil phosphatases activities effectively. This effect was not only related to soil properties, such as pH and phosphorus forms, but might also be related to the excreted enzyme amount of the stimulating microorganism. Using fluorescence spectroscopy to study exogenous phytase addition influence on soil phosphatase activities was the first time at home and abroad. Compared with the conventional spectrophotometric method, the fluorescence microplate method is an accurate, fast and simple to use method to determine the relationships among the soil phosphatases activities.

  13. A Detailed Chandra Archive Study of the Young O-Rich Supernova Remnant 1E 0102.2-7219 in the Small Magellanic Cloud

    NASA Astrophysics Data System (ADS)

    Alan, Neslihan; Bilir, Selçuk; Park, Sangwook; Schenck, Andrew

    2016-07-01

    Based on the deep 273 ks archival Chandra data we performed detailed spatially-resolved spectral analysis of the oxygen-rich supernova remnant (SNR) 1E 0102.2-7219 (E0102) in the Small Magellanic Cloud. Our aim in this study is to reveal spatial and chemical structures of this remnant in unprecedented details. We examined radial and azimuthal structures in the electron temperature, ionization timescale, emission measure, and elemental abundances. We estimate the progenitor's mass (˜40 M _{sun}) based on O, Ne, and Mg abundance ratios. We estimate the Sedov age (˜3500 yr) and explosion energy (˜1.8x10 ^{51} erg) for E0102. We shortly discuss the implications of our results on the geometrical structure of the remnant, its circumstellar medium and the nature of the progenitor star.

  14. A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy

    DOE PAGES

    Xue, Jiawei; Zhang, Anfeng; Li, Yao; Qian, Dan; Wan, Jingchun; Qi, Baolu; Tamura, Nobumichi; Song, Zhongxiao; Chen, Kai

    2015-10-08

    Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate the quality in terms of crystal orientation and defect distribution of a Ni-based superalloy DZ125L directly formed by a laser additive process rooted from a single crystalline substrate of the same material. We show that a disorientation gradient caused bymore » a high density of geometrically necessary dislocations and resultant subgrains exists in the interfacial region between the epitaxial and stray grains. This creates a potential relationship of stray grain formation and defect accumulation. In conclusion, the observation offers new directions on the study of performance control and reliability of the laser additive manufactured superalloys.« less

  15. Couples Counseling in Alzheimer's Disease: Additional Clinical Findings from a Novel Intervention Study.

    PubMed

    Auclair, Ursula; Epstein, Cynthia; Mittelman, Mary

    2009-04-01

    This article describes the clinical findings of a study designed to assess the benefit of counseling for couples, one of whom is in the early stage of Alzheimer's disease (AD). We previously reported our findings based on the first 12 couples that enrolled in the study. Based on the treatment of 30 additional couples, we have refined our treatment strategy to include concepts of Gestalt Therapy and Transactional Analysis and identified prevalent issues of concern to this cohort. The study design has remained as described in the earlier article (Epstein et al., 2006), and has proven to be appropriate to meet the goals of this intervention as indicated by our clinical experience and feedback from the participating couples. Case vignettes demonstrate how to conduct the sessions so that the experience of each member of the dyad is validated, while acknowledging the differential impact of the disease on them. PMID:19865591

  16. Addition of fluoride to pit and fissure sealants--a feasibility study.

    PubMed

    Swartz, M L; Phillips, R W; Norman, R D; Elliason, S; Rhodes, B F; Clark, H E

    1976-01-01

    The data obtained in this in vitro study indicate that contact with pit and fissure sealants to which NaF has been added in amounts ranging from 2 to 5% substantially increases the fluoride content of the enamel and reduces its solubility in acid. The properties of the materials do not seem to be impaired by the addition of fluoride in these amounts. It thus appears that this approach to providing a backup anticariogenic mechanism may, indeed, be feasible. However, further investigation must be done to confirm the anticariogenic effect and to establish the most efficacious means of fluoride incorporation in the materials.

  17. A water soluble additive to suppress respirable dust from concrete-cutting chainsaws: a case study.

    PubMed

    Summers, Michael P; Parmigiani, John P

    2015-01-01

    Respirable dust is of particular concern in the construction industry because it contains crystalline silica. Respirable forms of silica are a severe health threat because they heighten the risk of numerous respirable diseases. Concrete cutting, a common work practice in the construction industry, is a major contributor to dust generation. No studies have been found that focus on the dust suppression of concrete-cutting chainsaws, presumably because, during normal operation water is supplied continuously and copiously to the dust generation points. However, there is a desire to better understand dust creation at low water flow rates. In this case study, a water-soluble surfactant additive was used in the chainsaw's water supply. Cutting was performed on a free-standing concrete wall in a covered outdoor lab with a hand-held, gas-powered, concrete-cutting chainsaw. Air was sampled at the operator's lapel, and around the concrete wall to simulate nearby personnel. Two additive concentrations were tested (2.0% and 0.2%), across a range of fluid flow rates (0.38-3.8 Lpm [0.1-1.0 gpm] at 0.38 Lpm [0.1 gpm] increments). Results indicate that when a lower concentration of additive is used exposure levels increase. However, all exposure levels, once adjusted for 3 hours of continuous cutting in an 8-hour work shift, are below the Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) of 5 mg/m(3). Estimates were made using trend lines to predict the fluid flow rates that would cause respirable dust exposure to exceed both the OSHA PEL and the American Conference of Governmental Industrial Hygienists (ACGIH®) threshold limit value (TLV).

  18. Magneto-optical study of uranium additions to amorphous TbxFe1 - x

    NASA Astrophysics Data System (ADS)

    Dillon, J. F., Jr.; van Dover, R. B.; Hong, M.; Gyorgy, E. M.; Albiston, S. D.

    1987-02-01

    Recent reports of huge magneto-optical Kerr rotations in certain crystalline metallic uranium compounds prompted a study of the magnetic and magneto-optical effects of uranium additions to a rare-earth transition metal amorphous alloy. Using variable composition samples, the polar Kerr effect at a small spot (e.g., 0.5 mm diam) was measured as field, temperature, and composition were varied. Points on the Curie line and the edges of the compensation region were determined from these observations. The compositions studied included (TbxFe1-x)1-yUy with 0.125≤x≤0.550 and y=0.0, 0.04, 0.07, 0.16. The addition of uranium to TbxFe1-x depresses the TC of Tb-rich material much more strongly than that of Tb-poor material. The compensation region does not shift at all with increasing y. It appears that uranium does not contribute to the magnetization of these amorphous alloys, nor does it significantly affect the magneto-optical effects.

  19. Characterization studies on the additives mixed L-arginine phosphate monohydrate (LAP) crystals

    NASA Astrophysics Data System (ADS)

    Haja Hameed, A. S.; Karthikeyan, C.; Ravi, G.; Rohani, S.

    2011-04-01

    L-arginine phosphate monohydrate (LAP), potassium thiocyanate (KSCN) mixed LAP (LAP:KSCN) and sodium sulfite (Na 2SO 3) mixed LAP (LAP:Na 2SO 3) single crystals were grown by slow cooling technique. The effect of microbial contamination and coloration on the growth solutions was studied. The crystalline powders of the grown crystals were examined by X-ray diffraction and the lattice parameters of the crystals were estimated. From the FTIR spectroscopic analysis, various functional group frequencies associated with the crystals were assigned. Vickers microhardness studies were done on {1 0 0} faces for pure and additives mixed LAP crystals. From the preliminary surface second harmonic generation (SHG) results, it was found that the SHG intensity at (1 0 0) face of LAP:KSCN crystal was much stronger than that of pure LAP.

  20. The guanidine and maleic acid (1:1) complex. The additional theoretical and experimental studies

    NASA Astrophysics Data System (ADS)

    Drozd, Marek; Dudzic, Damian

    2012-04-01

    On the basis of experimental literature data the theoretical studies for guanidinium and maleic acid complex with using DFT method are performed. In these studies the experimental X-ray data for two different forms of investigated crystal were used. During the geometry optimization process one equilibrium structure was found, only. According to this result the infrared spectrum for one theoretical molecule was calculated. On the basis of potential energy distribution (PED) analysis the clear-cut assignments of observed bands were performed. For the calculated molecule with energy minimum the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were obtained and graphically illustrated. The energy difference (GAP) between HOMO and LUMO was analyzed. Additionally, the nonlinear properties of this molecule were calculated. The α and β (first and second order) hyperpolarizability values are obtained. On the basis of these results the title crystal was classified as new second order NLO generator.

  1. Prazosin addition to fluvoxamine: A preclinical study and open clinical trial in OCD.

    PubMed

    Feenstra, Matthijs G P; Klompmakers, André; Figee, Martijn; Fluitman, Sjoerd; Vulink, Nienke; Westenberg, Herman G M; Denys, Damiaan

    2016-02-01

    The efficacy of selective serotonin reuptake inhibitors (SRIs) in psychiatric disorders may be "augmented" through the addition of atypical antipsychotic drugs. A synergistic increase in dopamine (DA) release in the prefrontal cortex has been suggested to underlie this augmentation effect, though the mechanism of action is not clear yet. We used in vivo microdialysis in rats to study DA release following the administration of combinations of fluvoxamine (10 mg/kg) and quetiapine (10 mg/kg) with various monoamine-related drugs. The results confirmed that the selective 5-HT1A antagonist WAY-100635 (0.05 mg/kg) partially blocked the fluvoxamine-quetiapine synergistic effect (maximum DA increase dropped from 325% to 214%). A novel finding is that the α1-adrenergic blocker prazosin (1 mg/kg), combined with fluvoxamine, partially mimicked the effect of augmentation (maximum DA increase 205%; area-under-the-curve 163%). As this suggested that prazosin augmentation might be tested in a clinical study, we performed an open clinical trial of prazosin 20 mg addition to SRI in therapy-resistant patients with obsessive-compulsive disorder applying for neurosurgery. A small, non-significant reduction in Yale Brown Obsessive Compulsive Scale (Y-BOCS) scores was observed in 10 patients and one patient was classified as a responder with a reduction in Y-BOCS scores of more than 25%. We suggest that future clinical studies augmenting SRIs with an α1-adrenergic blocker in less treatment resistant cases should be considered. The clinical trial "Prazosin in combination with a serotonin reuptake inhibitor for patients with Obsessive Compulsive disorder: an open label study" was registered at 24/05/2011 under trial number ISRCTN61562706: http://www.controlled-trials.com/ISRCTN61562706. PMID:26712326

  2. A combined toxicity study of zinc oxide nanoparticles and vitamin C in food additives

    NASA Astrophysics Data System (ADS)

    Wang, Yanli; Yuan, Lulu; Yao, Chenjie; Ding, Lin; Li, Chenchen; Fang, Jie; Sui, Keke; Liu, Yuanfang; Wu, Minghong

    2014-11-01

    At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the cytotoxicity significantly compared with that of the ZnO only NPs. When the cells were exposed to ZnO NPs at a concentration less than 15 mg L-1, or to Vc at a concentration less than 300 mg L-1, there was no significant cytotoxicity, both in the case of gastric epithelial cell line (GES-1) and neural stem cells (NSCs). However, when 15 mg L-1 of ZnO NPs and 300 mg L-1 of Vc were introduced to cells together, the cell viability decreased sharply indicating significant cytotoxicity. Moreover, the significant increase in toxicity was also shown in the in vivo experiments. The dose of the ZnO NPs and Vc used in the in vivo study was calculated according to the state of food and nutrition enhancer standard. After repeated oral exposure to ZnO NPs plus Vc, the injury of the liver and kidneys in mice has been indicated by the change of these indices. These findings demonstrate that the synergistic toxicity presented in a complex system is essential for the toxicological evaluation and safety assessment of nanofood.At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the

  3. Impact of contacting study authors to obtain additional data for systematic reviews: diagnostic accuracy studies for hepatic fibrosis

    PubMed Central

    2014-01-01

    Background Seventeen of 172 included studies in a recent systematic review of blood tests for hepatic fibrosis or cirrhosis reported diagnostic accuracy results discordant from 2 × 2 tables, and 60 studies reported inadequate data to construct 2 × 2 tables. This study explores the yield of contacting authors of diagnostic accuracy studies and impact on the systematic review findings. Methods Sixty-six corresponding authors were sent letters requesting additional information or clarification of data from 77 studies. Data received from the authors were synthesized with data included in the previous review, and diagnostic accuracy sensitivities, specificities, and positive and likelihood ratios were recalculated. Results Of the 66 authors, 68% were successfully contacted and 42% provided additional data for 29 out of 77 studies (38%). All authors who provided data at all did so by the third emailed request (ten authors provided data after one request). Authors of more recent studies were more likely to be located and provide data compared to authors of older studies. The effects of requests for additional data on the conclusions regarding the utility of blood tests to identify patients with clinically significant fibrosis or cirrhosis were generally small for ten out of 12 tests. Additional data resulted in reclassification (using median likelihood ratio estimates) from less useful to moderately useful or vice versa for the remaining two blood tests and enabled the calculation of an estimate for a third blood test for which previously the data had been insufficient to do so. We did not identify a clear pattern for the directional impact of additional data on estimates of diagnostic accuracy. Conclusions We successfully contacted and received results from 42% of authors who provided data for 38% of included studies. Contacting authors of studies evaluating the diagnostic accuracy of serum biomarkers for hepatic fibrosis and cirrhosis in hepatitis C patients

  4. Chord Splicing & Joining Detail; Chord & CrossBracing Joint Details; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Chord Splicing & Joining Detail; Chord & Cross-Bracing Joint Details; Cross Bracing Center Joint Detail; Chord & Diagonal Joint Detail - Vermont Covered Bridge, Highland Park, spanning Kokomo Creek at West end of Deffenbaugh Street (moved to), Kokomo, Howard County, IN

  5. Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, Panel Post, Tie & Diagonal Brace Joint Detail; Chord, Panel Post, Tie & Crossbracing Joint Detail - Dunlapsville Covered Bridge, Spanning East Fork Whitewater River, Dunlapsville, Union County, IN

  6. A study of pyrazines in cigarettes and how additives might be used to enhance tobacco addiction

    PubMed Central

    Alpert, Hillel R; Agaku, Israel T; Connolly, Gregory N

    2016-01-01

    Background Nicotine is known as the drug that is responsible for the addicted behaviour of tobacco users, but it has poor reinforcing effects when administered alone. Tobacco product design features enhance abuse liability by (A) optimising the dynamic delivery of nicotine to central nervous system receptors, and affecting smokers’ withdrawal symptoms, mood and behaviour; and (B) effecting conditioned learning, through sensory cues, including aroma, touch and visual stimulation, to create perceptions of pending nicotine reward. This study examines the use of additives called ‘pyrazines’, which may enhance abuse potential, their introduction in ‘lights’ and subsequently in the highly market successful Marlboro Lights (Gold) cigarettes and eventually many major brands. Methods We conducted internal tobacco industry research using online databases in conjunction with published scientific literature research, based on an iterative feedback process. Results Tobacco manufacturers developed the use of a range of compounds, including pyrazines, in order to enhance ‘light’ cigarette products’ acceptance and sales. Pyrazines with chemosensory and pharmacological effects were incorporated in the first ‘full-flavour, low-tar’ product achieving high market success. Such additives may enhance dependence by helping to optimise nicotine delivery and dosing and through cueing and learned behaviour. Conclusions Cigarette additives and ingredients with chemosensory effects that promote addiction by acting synergistically with nicotine, increasing product appeal, easing smoking initiation, discouraging cessation or promoting relapse should be regulated by the US Food and Drug Administration. Current models of tobacco abuse liability could be revised to include more explicit roles with regard to non-nicotine constituents that enhance abuse potential. PMID:26063608

  7. A combined toxicity study of zinc oxide nanoparticles and vitamin C in food additives.

    PubMed

    Wang, Yanli; Yuan, Lulu; Yao, Chenjie; Ding, Lin; Li, Chenchen; Fang, Jie; Sui, Keke; Liu, Yuanfang; Wu, Minghong

    2014-12-21

    At present, safety evaluation standards for nanofood additives are made based on the toxic effects of a single additive. Since the size, surface properties and chemical nature influence the toxicity of nanomaterials, the toxicity may have dramatically changed when nanomaterials are used as food additives in a complex system. Herein, we investigated the combined toxicity of zinc oxide nanoparticles (ZnO NPs) and vitamin C (Vc, ascorbic acid). The results showed that Vc increased the cytotoxicity significantly compared with that of the ZnO only NPs. When the cells were exposed to ZnO NPs at a concentration less than 15 mg L(-1), or to Vc at a concentration less than 300 mg L(-1), there was no significant cytotoxicity, both in the case of gastric epithelial cell line (GES-1) and neural stem cells (NSCs). However, when 15 mg L(-1) of ZnO NPs and 300 mg L(-1) of Vc were introduced to cells together, the cell viability decreased sharply indicating significant cytotoxicity. Moreover, the significant increase in toxicity was also shown in the in vivo experiments. The dose of the ZnO NPs and Vc used in the in vivo study was calculated according to the state of food and nutrition enhancer standard. After repeated oral exposure to ZnO NPs plus Vc, the injury of the liver and kidneys in mice has been indicated by the change of these indices. These findings demonstrate that the synergistic toxicity presented in a complex system is essential for the toxicological evaluation and safety assessment of nanofood.

  8. Rate constants of hydroperoxyl radical addition to cyclic nitrones: a DFT study.

    PubMed

    Villamena, Frederick A; Merle, John K; Hadad, Christopher M; Zweier, Jay L

    2007-10-01

    Nitrones are potential synthetic antioxidants against the reduction of radical-mediated oxidative damage in cells and as analytical reagents for the identification of HO2* and other such transient species. In this work, the PCM/B3LYP/6-31+G(d,p)//B3LYP/6-31G(d) and PCM/mPW1K/6-31+G(d,p) density functional theory (DFT) methods were employed to predict the reactivity of HO2* with various functionalized nitrones as spin traps. The calculated second-order rate constants and free energies of reaction at both levels of theory were in the range of 100-103 M-1 s-1 and 1 to -12 kcal mol-1, respectively, and the rate constants for some nitrones are on the same order of magnitude as those observed experimentally. The trend in HO2* reactivity to nitrones could not be explained solely on the basis of the relationship of the theoretical positive charge densities on the nitronyl-C, with their respective ionization potentials, electron affinities, rate constants, or free energies of reaction. However, various modes of intramolecular H-bonding interaction were observed at the transition state (TS) structures of HO2* addition to nitrones. The presence of intramolecular H-bonding interactions in the transition states were predicted and may play a significant role toward a facile addition of HO2* to nitrones. In general, HO2* addition to ethoxycarbonyl- and spirolactam-substituted nitrones, as well as those nitrones without electron-withdrawing substituents, such as 5,5-dimethyl-pyrroline N-oxide (DMPO) and 5-spirocyclopentyl-pyrroline N-oxide (CPPO), are most preferred compared to the methylcarbamoyl-substituted nitrones. This study suggests that the use of specific spin traps for efficient trapping of HO2* could pave the way toward improved radical detection and antioxidant protection. PMID:17845014

  9. Additional follow-up telephone counselling and initial smoking relapse: a longitudinal, controlled study

    PubMed Central

    Wu, Lei; He, Yao; Jiang, Bin; Zuo, Fang; Liu, Qinghui; Zhang, Li; Zhou, Changxi

    2016-01-01

    Objectives Smoking cessation services can help smokers to quit; however, many smoking relapse cases occur over time. Initial relapse prevention should play an important role in achieving the goal of long-term smoking cessation. Several studies have focused on the effect of extended telephone support in relapse prevention, but the conclusions remain conflicting. Design and setting From October 2008 to August 2013, a longitudinal, controlled study was performed in a large general hospital of Beijing. Participants The smokers who sought treatment at our smoking cessation clinic were non-randomised and divided into 2 groups: face-to-face individual counselling group (FC group), and face-to-face individual counselling plus telephone follow-up counselling group (FCF group). No pharmacotherapy was offered. Outcomes The timing of initial smoking relapse was compared between FC and FCF groups. Predictors of initial relapse were investigated during the first 180 days, using the Cox proportional hazards model. Results Of 547 eligible male smokers who volunteered to participate, 457 participants (117 in FC group and 340 in FCF group) achieved at least 24 h abstinence. The majority of the lapse episodes occurred during the first 2 weeks after the quit date. Smokers who did not receive the follow-up telephone counselling (FC group) tended to relapse to smoking earlier than those smokers who received the additional follow-up telephone counselling (FCF group), and the log-rank test was statistically significant (p=0.003). A Cox regression model showed that, in the FCF group, being married, and having a lower Fagerström test score, normal body mass index and doctor-diagnosed tobacco-related chronic diseases, were significantly independent protective predictors of smoking relapse. Conclusions Within the limitations of this study, it can be concluded that additional follow-up telephone counselling might be an effective strategy in preventing relapse. Further research is still

  10. Study of mandible reconstruction using a fibula flap with application of additive manufacturing technology

    PubMed Central

    2014-01-01

    Background This study aimed to establish surgical guiding techniques for completing mandible lesion resection and reconstruction of the mandible defect area with fibula sections in one surgery by applying additive manufacturing technology, which can reduce the surgical duration and enhance the surgical accuracy and success rate. Methods A computer assisted mandible reconstruction planning (CAMRP) program was used to calculate the optimal cutting length and number of fibula pieces and design the fixtures for mandible cutting, registration, and arrangement of the fibula segments. The mandible cutting and registering fixtures were then generated using an additive manufacturing system. The CAMRP calculated the optimal fibula cutting length and number of segments based on the location and length of the defective portion of the mandible. The mandible cutting jig was generated according to the boundary surface of the lesion resection on the mandible STL model. The fibular cutting fixture was based on the length of each segment, and the registered fixture was used to quickly arrange the fibula pieces into the shape of the defect area. In this study, the mandibular lesion was reconstructed using registered fibular sections in one step, and the method is very easy to perform. Results and conclusion The application of additive manufacturing technology provided customized models and the cutting fixtures and registered fixtures, which can improve the efficiency of clinical application. This study showed that the cutting fixture helped to rapidly complete lesion resection and fibula cutting, and the registered fixture enabled arrangement of the fibula pieces and allowed completion of the mandible reconstruction in a timely manner. Our method can overcome the disadvantages of traditional surgery, which requires a long and different course of treatment and is liable to cause error. With the help of optimal cutting planning by the CAMRP and the 3D printed mandible resection jig and

  11. Toxicogenomics concepts and applications to study hepatic effects of food additives and chemicals

    SciTech Connect

    Stierum, Rob . E-mail: stierum@voeding.tno.nl; Heijne, Wilbert; Kienhuis, Anne; Ommen, Ben van; Groten, John

    2005-09-01

    Transcriptomics, proteomics and metabolomics are genomics technologies with great potential in toxicological sciences. Toxicogenomics involves the integration of conventional toxicological examinations with gene, protein or metabolite expression profiles. An overview together with selected examples of the possibilities of genomics in toxicology is given. The expectations raised by toxicogenomics are earlier and more sensitive detection of toxicity. Furthermore, toxicogenomics will provide a better understanding of the mechanism of toxicity and may facilitate the prediction of toxicity of unknown compounds. Mechanism-based markers of toxicity can be discovered and improved interspecies and in vitro-in vivo extrapolations will drive model developments in toxicology. Toxicological assessment of chemical mixtures will benefit from the new molecular biological tools. In our laboratory, toxicogenomics is predominantly applied for elucidation of mechanisms of action and discovery of novel pathway-supported mechanism-based markers of liver toxicity. In addition, we aim to integrate transcriptome, proteome and metabolome data, supported by bioinformatics to develop a systems biology approach for toxicology. Transcriptomics and proteomics studies on bromobenzene-mediated hepatotoxicity in the rat are discussed. Finally, an example is shown in which gene expression profiling together with conventional biochemistry led to the discovery of novel markers for the hepatic effects of the food additives butylated hydroxytoluene, curcumin, propyl gallate and thiabendazole.

  12. Resources allocation in healthcare for cancer: a case study using generalised additive mixed models.

    PubMed

    Musio, Monica; Sauleau, Erik A; Augustin, Nicole H

    2012-11-01

    Our aim is to develop a method for helping resources re-allocation in healthcare linked to cancer, in order to replan the allocation of providers. Ageing of the population has a considerable impact on the use of health resources because aged people require more specialised medical care due notably to cancer. We propose a method useful to monitor changes of cancer incidence in space and time taking into account two age categories, according to healthcar general organisation. We use generalised additive mixed models with a Poisson response, according to the methodology presented in Wood, Generalised additive models: an introduction with R. Chapman and Hall/CRC, 2006. Besides one-dimensional smooth functions accounting for non-linear effects of covariates, the space-time interaction can be modelled using scale invariant smoothers. Incidence data collected by a general cancer registry between 1992 and 2007 in a specific area of France is studied. Our best model exhibits a strong increase of the incidence of cancer along time and an obvious spatial pattern for people more than 70 years with a higher incidence in the central band of the region. This is a strong argument for re-allocating resources for old people cancer care in this sub-region. PMID:23242683

  13. Covalent binding of aniline to humic substances. 2. 15N NMR studies of nucleophilic addition reactions

    USGS Publications Warehouse

    Thorn, K.A.; Pettigrew, P.J.; Goldenberg, W.S.; Weber, E.J.

    1996-01-01

    Aromatic amines are known to undergo covalent binding with humic substances in the environment. Although previous studies have examined reaction conditions and proposed mechanisms, there has been no direct spectroscopic evidence for the covalent binding of the amines to the functional groups in humic substances. In order to further elucidate the reaction mechanisms, the Suwannee River and IHSS soil fulvic and humic acids were reacted with 15N-labeled aniline at pH 6 and analyzed using 15N NMR spectrometry. Aniline underwent nucleophilic addition reactions with the quinone and other carbonyl groups in the samples and became incorporated in the form of anilinohydroquinone, anilinoquinone, anilide, imine, and heterocyclic nitrogen, the latter comprising 50% or more of the bound amine. The anilide and anilinohydroquinone nitrogens were determined to be susceptible to chemical exchange by ammonia. In the case of Suwannee River fulvic acid, reaction under anoxic conditions and pretreatment with sodium borohydride or hydroxylamine prior to reaction under oxic conditions resulted in a decrease in the proportion of anilinohydroquinone nitrogen incorporated. The relative decrease in the incorporation of anilinohydroquinone nitrogen with respect to anilinoquinone nitrogen under anoxic conditions suggested that inter- or intramolecular redox reactions accompanied the nucleophilic addition reactions.

  14. Studies on the reuse of waste printed circuit board as an additive for cement mortar.

    PubMed

    Ban, Bong-Chan; Song, Jong-Yoon; Lim, Joong-Yeon; Wang, Soo-Kyoon; An, Kwang-Guk; Kim, Dong-Su

    2005-01-01

    The recent development in electronic industries has generated a drastic increase in production of printed circuit boards (PCB). Accordingly, the amount of waste PCB from electronic productions and waste electronics and its environmental impact such as soil and groundwater contamination have become a great concern. This study aims to propose a method for reuse of waste PCB as an additive for cement mortar. Although the expansibility of waste PCB powder finer than 0.08 mm in water was observed to be greater than 2.0%, the maximum expansion rates in water for 0.08 to approximately 0.15 and 0.15 to approximately 0.30 mm sized PCB powders were less than 2.0%, which satisfied the necessary condition as an alternative additive for cement mortar in place of sand. The difference in the compressive strength of standard mortar and waste PCB added mortar was observed to be less than 10% and their difference was expected to be smaller after prolonged aging. The durability of waste PCB added cement mortar was also examined through dry/wet conditioning cyclic tests and acidic/alkaline conditioning tests. From the tests, both weight and compressive strength of cement mortar were observed to be recovered with aging. The leaching test for heavy metals from waste PCB added mortar showed that no heavy metal ions such as copper, lead, or cadmium were detected in the leachate, which resulted from fixation effect of the cement hydrates.

  15. Assessment of Nano Cellulose from Peach Palm Residue as Potential Food Additive: Part II: Preliminary Studies.

    PubMed

    Andrade, Dayanne Regina Mendes; Mendonça, Márcia Helena; Helm, Cristiane Vieira; Magalhães, Washington L E; de Muniz, Graciela Ines Bonzon; Kestur, Satyanarayana G

    2015-09-01

    High consumption of dietary fibers in the diet is related to the reduction of the risk of non-transmitting of chronic diseases, prevention of the constipation etc. Rich diets in dietary fibers promote beneficial effects for the metabolism. Considering the above and recognizing the multifaceted advantages of nano materials, there have been many attempts in recent times to use the nano materials in the food sector including as food additive. However, whenever new product for human and animal consumption is developed, it has to be tested for their effectiveness regarding improvement in the health of consumers, safety aspects and side effects. However, before it is tried with human beings, normally such materials would be assessed through biological tests on a living organism to understand its effect on health condition of the consumer. Accordingly, based on the authors' finding reported in a previous paper, this paper presents body weight, biochemical (glucose, cholesterol and lipid profile in blood, analysis of feces) and histological tests carried out with biomass based cellulose nano fibrils prepared by the authors for its possible use as food additive. Preliminary results of the study with mice have clearly brought out potential of these fibers for the said purpose. PMID:26344977

  16. Resources allocation in healthcare for cancer: a case study using generalised additive mixed models.

    PubMed

    Musio, Monica; Sauleau, Erik A; Augustin, Nicole H

    2012-11-01

    Our aim is to develop a method for helping resources re-allocation in healthcare linked to cancer, in order to replan the allocation of providers. Ageing of the population has a considerable impact on the use of health resources because aged people require more specialised medical care due notably to cancer. We propose a method useful to monitor changes of cancer incidence in space and time taking into account two age categories, according to healthcar general organisation. We use generalised additive mixed models with a Poisson response, according to the methodology presented in Wood, Generalised additive models: an introduction with R. Chapman and Hall/CRC, 2006. Besides one-dimensional smooth functions accounting for non-linear effects of covariates, the space-time interaction can be modelled using scale invariant smoothers. Incidence data collected by a general cancer registry between 1992 and 2007 in a specific area of France is studied. Our best model exhibits a strong increase of the incidence of cancer along time and an obvious spatial pattern for people more than 70 years with a higher incidence in the central band of the region. This is a strong argument for re-allocating resources for old people cancer care in this sub-region.

  17. Mechanisms on electrical breakdown strength increment of polyethylene by aromatic carbonyl compounds addition: a theoretical study.

    PubMed

    Zhang, Hui; Shang, Yan; Wang, Xuan; Zhao, Hong; Han, Baozhong; Li, Zesheng

    2013-12-01

    A theoretical investigation is accomplished on the mechanisms of electrical breakdown strength increment of polyethylene at the atomic and molecular levels. It is found that the addition of aromatic carbonyl compounds as voltage stabilizers is one of the important factors for increasing electrical breakdown strength of polyethylene, as the additives can trap hot electrons, obtain energy of hot electrons, and transform the aliphatic cation to relatively stable aromatic cation to prevent the degradation of the polyethylene matrix. The HOMO-LUMO energy gaps (E(g)), the ionization potentials (IPs), and electron affinities (EAs) at the ground states of a series of aromatic carbonyl compounds are obtained at the B3LYP/6-311+G(d,p) level. The theoretical results are in good agreement with the available experimental findings, show that 2,4-dioctyloxybenzophenone (Bzo) and 4,4'-didodecyloxybenzil (Bd) molecules can effectively increase the electrical breakdown strength when they are doped into polyethylene because of their much smaller E g values than all the other studied aromatic carbonyl molecules and excellent compatibility with polymers matrix.

  18. Reporting standards of studies and papers on the prevention and management of foot ulcers in diabetes: required details and markers of good quality.

    PubMed

    Jeffcoate, William J; Bus, Sicco A; Game, Frances L; Hinchliffe, Robert J; Price, Patricia E; Schaper, Nicolaas C

    2016-09-01

    The evidence base for many aspects of the management of foot ulcers in people with diabetes is weak, and good-quality research, especially relating to studies of direct relevance to routine clinical care, is needed. In this paper, we summarise the core details required in the planning and reporting of intervention studies in the prevention and management of diabetic foot ulcers, including studies that focus on off-loading, stimulation of wound healing, peripheral artery disease, and infection. We highlight aspects of trial design, conduct, and reporting that should be taken into account to minimise bias and improve quality. We also provide a 21-point checklist for researchers and for readers who assess the quality of published work.

  19. Study on Friction and Wear Properties of Silver Matrix Brush Material with Different Additives

    NASA Astrophysics Data System (ADS)

    Chen, Xiaoli; Wang, Wenfang; Hong, Yu; Wu, Yucheng

    2013-07-01

    Friction and wear processes of AgCuX (G, CF and AlN) composites-CuAgV alloy friction pair and effects of different additive content in silver based composite on friction and wear behavior are studied in this paper. The microstructure of the brush wear surface is observed by SEM. The results show that when graphite content is up to 9 wt.%, Ag-Cu-CF-G composite exhibits the best wear properties; when the content of aluminum nitride is up to 0.5 wt.%, Ag-Cu-AlN-G composites has the most comprehensive performance. The wear loss of both composites arises with the increase of both pressure and speed, but when speed reaches a critical value, the increased amplitude of wear loss tends to be steady.

  20. Comparative study of dimensional accuracy of different impression techniques using addition silicone impression material.

    PubMed

    Penaflor, C F; Semacio, R C; De Las Alas, L T; Uy, H G

    1998-01-01

    This study compared dimensional accuracy of the single, double with spacer, double with cut-out and double mix impression technique using addition silicone impression material. A typhodont containing Ivorine teeth model with six (6) full-crown tooth preparations were used as the positive control. Two stone replication models for each impression technique were made as test materials. Accuracy of the techniques were assessed by measuring four dimensions on the stone dies poured from the impression of the Ivorine teeth model. Results indicated that most of the measurements for the height, width and diameter slightly decreased and a few increased compared with the Ivorine teeth model. The double with cut-out and double mix technique presents the least difference from the master model as compared to the two latter impression techniques. PMID:10202524

  1. Study of cadmium, zinc and lead biosorption by orange wastes using the subsequent addition method.

    PubMed

    Pérez-Marín, A B; Ballester, A; González, F; Blázquez, M L; Muñoz, J A; Sáez, J; Zapata, V Meseguer

    2008-11-01

    The biosorption of several metals (Cd2+, Zn2+ and Pb2+) by orange wastes has been investigated in binary systems. Multicomponent sorption isotherms were obtained using an original procedure, similar to that proposed by Pagnanelli et al. [Pagnanelli, F., Petrangeli, M.P., Toro, L., Trifoni, M., Veglio, F., 2001a. Biosorption of metal ions on Arthrobacter sp.: biomass characterization and biosorption modelling. Environ. Sci. Technol. 34, 2773-2778] for monoelement systems, known as subsequent addition method (SAM). Experimental sorption data were analysed using an extended multicomponent Langmuir equation. The maximum sorption uptake was approximately 0.25mmol/g for the three binary systems studied. The reliability of the proposed procedure for obtaining the equilibrium data in binary systems was verified by means of a statistical F-test. PMID:18440805

  2. Spectroscopic studies of nucleic acid additions during seed-mediated growth of gold nanoparticles

    PubMed Central

    Tapp, Maeling; Sullivan, Rick; Dennis, Patrick; Naik, Rajesh R.

    2015-01-01

    The effect of adding nucleic acids to gold seeds during the growth stage of either nanospheres or nanorods was investigated using UV-Vis spectroscopy to reveal any oligonucleotide base or structure-specific effects on nanoparticle growth kinetics or plasmonic signatures. Spectral data indicate that the presence of DNA duplexes during seed ageing drastically accelerated nanosphere growth while the addition of single-stranded polyadenine at any point during seed ageing induces nanosphere aggregation. For seeds added to a gold nanorod growth solution, single-stranded polythymine induces a modest blue-shift in the longitudinal peak wavelength. Moreover, a particular sequence comprised of 50% thymine bases was found to induce a faster, more dramatic blue-shift in the longitudinal peak wavelength compared to any of the homopolymer incubation cases. Monomeric forms of the nucleic acids, however, do not yield discernable spectral differences in any of the gold suspensions studied. PMID:25960601

  3. Rapid identification of color additives, using the C18 cartridge: collaborative study.

    PubMed

    Young, M L

    1988-01-01

    Nine laboratories collaboratively studied a method for the separation and identification of the 7 permitted FD&C color additives (Red Nos. 3 and 40; Blue Nos. 1 and 2; Yellow Nos. 5 and 6; Green No. 3) and the banned FD&C Red No. 2 in foods. The method is based on use of a commercial C18 cartridge and spectrophotometry or thin layer chromatography. Collaborators analyzed 5 commercial products (noodles, candy, carbonated soda, flavored gelatin, and powdered drink) and 2 dye mixtures (one containing FD&C Red Nos. 2, 3, and 40; the other containing FD&C Green No. 3 and Red No. 3). All of the colors were identified with little or no difficulty by 8 collaborators. The method has been adopted official first action.

  4. Genetic assessment of additional endophenotypes from the Consortium on the Genetics of Schizophrenia Family Study.

    PubMed

    Greenwood, Tiffany A; Lazzeroni, Laura C; Calkins, Monica E; Freedman, Robert; Green, Michael F; Gur, Raquel E; Gur, Ruben C; Light, Gregory A; Nuechterlein, Keith H; Olincy, Ann; Radant, Allen D; Seidman, Larry J; Siever, Larry J; Silverman, Jeremy M; Stone, William S; Sugar, Catherine A; Swerdlow, Neal R; Tsuang, Debby W; Tsuang, Ming T; Turetsky, Bruce I; Braff, David L

    2016-01-01

    The Consortium on the Genetics of Schizophrenia Family Study (COGS-1) has previously reported our efforts to characterize the genetic architecture of 12 primary endophenotypes for schizophrenia. We now report the characterization of 13 additional measures derived from the same endophenotype test paradigms in the COGS-1 families. Nine of the measures were found to discriminate between schizophrenia patients and controls, were significantly heritable (31 to 62%), and were sufficiently independent of previously assessed endophenotypes, demonstrating utility as additional endophenotypes. Genotyping via a custom array of 1536 SNPs from 94 candidate genes identified associations for CTNNA2, ERBB4, GRID1, GRID2, GRIK3, GRIK4, GRIN2B, NOS1AP, NRG1, and RELN across multiple endophenotypes. An experiment-wide p value of 0.003 suggested that the associations across all SNPs and endophenotypes collectively exceeded chance. Linkage analyses performed using a genome-wide SNP array further identified significant or suggestive linkage for six of the candidate endophenotypes, with several genes of interest located beneath the linkage peaks (e.g., CSMD1, DISC1, DLGAP2, GRIK2, GRIN3A, and SLC6A3). While the partial convergence of the association and linkage likely reflects differences in density of gene coverage provided by the distinct genotyping platforms, it is also likely an indication of the differential contribution of rare and common variants for some genes and methodological differences in detection ability. Still, many of the genes implicated by COGS through endophenotypes have been identified by independent studies of common, rare, and de novo variation in schizophrenia, all converging on a functional genetic network related to glutamatergic neurotransmission that warrants further investigation. PMID:26597662

  5. Genetic assessment of additional endophenotypes from the Consortium on the Genetics of Schizophrenia Family Study.

    PubMed

    Greenwood, Tiffany A; Lazzeroni, Laura C; Calkins, Monica E; Freedman, Robert; Green, Michael F; Gur, Raquel E; Gur, Ruben C; Light, Gregory A; Nuechterlein, Keith H; Olincy, Ann; Radant, Allen D; Seidman, Larry J; Siever, Larry J; Silverman, Jeremy M; Stone, William S; Sugar, Catherine A; Swerdlow, Neal R; Tsuang, Debby W; Tsuang, Ming T; Turetsky, Bruce I; Braff, David L

    2016-01-01

    The Consortium on the Genetics of Schizophrenia Family Study (COGS-1) has previously reported our efforts to characterize the genetic architecture of 12 primary endophenotypes for schizophrenia. We now report the characterization of 13 additional measures derived from the same endophenotype test paradigms in the COGS-1 families. Nine of the measures were found to discriminate between schizophrenia patients and controls, were significantly heritable (31 to 62%), and were sufficiently independent of previously assessed endophenotypes, demonstrating utility as additional endophenotypes. Genotyping via a custom array of 1536 SNPs from 94 candidate genes identified associations for CTNNA2, ERBB4, GRID1, GRID2, GRIK3, GRIK4, GRIN2B, NOS1AP, NRG1, and RELN across multiple endophenotypes. An experiment-wide p value of 0.003 suggested that the associations across all SNPs and endophenotypes collectively exceeded chance. Linkage analyses performed using a genome-wide SNP array further identified significant or suggestive linkage for six of the candidate endophenotypes, with several genes of interest located beneath the linkage peaks (e.g., CSMD1, DISC1, DLGAP2, GRIK2, GRIN3A, and SLC6A3). While the partial convergence of the association and linkage likely reflects differences in density of gene coverage provided by the distinct genotyping platforms, it is also likely an indication of the differential contribution of rare and common variants for some genes and methodological differences in detection ability. Still, many of the genes implicated by COGS through endophenotypes have been identified by independent studies of common, rare, and de novo variation in schizophrenia, all converging on a functional genetic network related to glutamatergic neurotransmission that warrants further investigation.

  6. Study of triallyl phosphate as an electrolyte additive for high voltage lithium-ion cells

    NASA Astrophysics Data System (ADS)

    Xia, J.; Madec, L.; Ma, L.; Ellis, L. D.; Qiu, W.; Nelson, K. J.; Lu, Z.; Dahn, J. R.

    2015-11-01

    The role of triallyl phosphate as an electrolyte additive in Li(Ni0.42Mn0.42Co0.16)O2/graphite pouch cells was studied using ex-situ gas measurements, ultra high precision coulometry, automated storage experiments, electrochemical impedance spectroscopy, long-term cycling and X-ray photoelectron spectroscopy. Cells containing triallyl phosphate produced less gas during formation, cycling and storage than control cells. The use of triallyl phosphate led to higher coulombic efficiency and smaller charge endpoint capacity slippage during ultra high precision charger testing. Cells containing triallyl phosphate showed smaller potential drop during 500 h storage at 40 °C and 60 °C and the voltage drop decreased as the triallyl phosphate content in the electrolyte increased. However, large amounts of triallyl phosphate (>3% by weight in the electrolyte) led to large impedance after cycling and storage. Symmetric cell studies showed large amounts of triallyl phosphate (5% or more) led to significant impedance increase at both negative and positive electrodes. X-ray photoelectron spectroscopy studies suggested that the high impedance came from the polymerization of triallyl phosphate molecules which formed thick solid electrolyte interphase films at the surfaces of both negative and positive electrodes. An optimal amount of 2%-3% triallyl phosphate led to better capacity retention during long term cycling.

  7. Seductive Details in Multimedia Messages

    ERIC Educational Resources Information Center

    Rey, Gunter Daniel

    2011-01-01

    The seductive detail principle asserts that people learn more deeply from a multimedia presentation when interesting but irrelevant adjuncts are excluded rather than included. However, critics could argue that studies about this principle contain methodological problems. The recent experiment attempts to overcome these problems. Students (N = 108)…

  8. Evidence of Rapidly Warming Rivers in the UK from an Extensive Additive Modelling Study at the National Scale Using R

    NASA Astrophysics Data System (ADS)

    Simpson, G. L.

    2011-12-01

    River water temperature data exhibit non-linear behaviour over the past 50 or so years. Standard techniques for identifying and quantifying trends have centred around the use of linear regression and Mann-Kendall and Thiel-Sen procedures. Observational data from UK rivers suggest that temperatures are far more variable then assumed under these statistical models. In a national-scale assessment of the response of riverine systems to global climatic change, an additive model framework was employed to model patterns in water temperatures from a large database of temporal observational data. Models were developed using R, which allowed for the deployment of cutting-edge additive modelling techniques to describe trends at 2773 sites across England and Wales, UK. At a subset of sites, additive models were used to model long-term trends, trends within seasons and the long-term variation in the seasonal pattern of water temperatures. Changes in water temperature have important consequences for aquatic ecology, with some species being particularly sensitive even to small shifts in temperature during some or all of their lifecycle. While there are many studies reporting increasing regional and global air temperatures, evidence for changes in river water temperature has thus far been site specific and/or from sites heavily influenced by human activities that could themselves lead to warming. Here I present selected results from a national-scale assessment of changing river water temperatures, covering the whole of England and Wales, comprising data from 2,773 locations. Positive trends in water temperature were observed at 86% of sites. At a subset of sites, seasonal trend models were developed, which showed that 90% of locations demonstrated statistically significant increases in water temperature during Autumn and Winter periods. Multivariate smoothers, that allow for within-year and longer-term trend interactions in time, suggest that periods of warmer waters now extend

  9. LF460 detail design

    NASA Technical Reports Server (NTRS)

    1971-01-01

    This is the final technical report documenting the detail design of the LF460, and advanced turbotip lift fan intended for application with the YJ97-GE-100 turbojet jet generator to a V/STOL transport research aircraft. Primary objective of the design was to achieve a low noise level while maintaining the high thrust/weight ratio capability of a high pressure ratio lift fan. Report covers design requirements and summarizes activities and final results in the areas of aerodynamic and mechanical design, component and system performance, acoustic features and final noise predictions.

  10. Details of meiosis

    SciTech Connect

    1993-12-31

    Chapter 18, discusses the details of meiosis, beginning with the structure and number of chiasmata, i.e., the cytological term for two homologous chromosomes forming a bivalent which begin to repel each other until they are held together only at the point of crossing-over. The synaptonemal complex which consists of two lateral elements which contain protein and RNA is also discussed. The chapter concludes with a description of meiosis in polyploids, human meiosis, and the behavior of X and Y chromosomes. 28 refs., 8 figs.

  11. Comparative study of differential flow and cryogenic modulators comprehensive two-dimensional gas chromatography systems for the detailed analysis of light cycle oil.

    PubMed

    Semard, G; Gouin, C; Bourdet, J; Bord, N; Livadaris, V

    2011-05-27

    The modulator is the key point of comprehensive two-dimensional gas chromatography (GC×GC). This interface ensures the sampling and transfer of the sample from the first to the second dimension. Many systems based on different principles have been developed. However, to our knowledge, almost only cryogenic modulators are used in the petroleum industry. Nevertheless cryogenic fluids represent some disadvantages in term of safety, cost and time consuming. This paper reports a comparative study between differential flow and cryogenic liquid modulators for the detailed analysis of hydrocarbons in middle distillates type light cycle oil (LCO). Optimization of geometrical dimensions of a set of columns was carried out on the differential flow modulator system in order to reproduce the quality of separation of cryogenic modulation. Then a comparative study was investigated on sensibility and resolution (separation space and peak capacity) between the two systems.

  12. The impact of bismuth addition to sequential treatment on Helicobacter pylori eradication: A pilot study.

    PubMed

    Basyigit, Sebahat; Kefeli, Ayse; Sapmaz, Ferdane; Yeniova, Abdullah Ozgür; Asilturk, Zeliha; Hokkaomeroglu, Murat; Uzman, Metin; Nazligul, Yasar

    2015-10-25

    The success of the current anti-Helicobacter pylori (H. pylori) treatment protocols is reported to decrease by years, and research is needed to strengthen the H. pylori eradication treatment. Sequential treatment (ST), one of the treatment modalities for H. pylori eradication, includes amoxicillin 1 gr b.i.d and proton pump inhibitor b.i.d for first 5 days and then includes clarithromycin 500 mg b.i.d, metronidazole 500 mg b.i.d and a proton pump inhibitor b.i.d for remaining 5 days. In this study, we investigated efficacy and tolerability of bismuth addition in to ST. We included patients that underwent upper gastrointestinal endoscopy in which H. pylori infection was diagnosed by histological examination of antral and corporal gastric mucosa biopsy. Participants were randomly administered ST or bismuth containing ST (BST) protocols for the first-line H. pylori eradication therapy. Participants have been tested by urea breath test for eradication success 6 weeks after the completion of treatment. One hundred and fifty patients (93 female, 57 male) were enrolled. There were no significant differences in eradication rates for both intention to treat population (70.2%, 95% confidence interval [CI]: 66.3-74.1% vs. 71.8%, 95% CI: 61.8-81.7%, for ST and BST, respectively, p>0.05) and per protocol population (74.6%, 95% CI: 63.2-85.8% vs. 73.7%, 95% CI: 63.9-83.5% for ST and BST, respectively, p>0.05). Despite the undeniable effect of bismuth, there may be several possible reasons of unsatisfactory eradication success. Drug administration time, coadministration of other drugs, possible H. pylori resistance to bismuth may affect the eradication success. The addition of bismuth subcitrate to ST regimen does not provide significant increase in eradication rates.

  13. Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Manogharan, Guha; Yelamanchi, Bharat; Aman, Ronald; Mahbooba, Zaynab

    2016-03-01

    Over the years, many studies have been conducted to study and analyze the grain structures of metal alloys during additive manufacturing to improve mechanical properties. In particular, columnar grains are observed predominantly during rapid solidification of molten metal. This leads to lower mechanical properties and requires expensive secondary heat-treatment processes. This study is aimed at disrupting the formation of columnar grain growth during rapid solidification using ultrasonic vibration and analyzes the effects on grain structure and mechanical properties. A gas-metal arc welder mounted on a Rep-Rap-based low-cost metal 3 Dimension printer was used to deposit ER70S-6 mild steel layers on a plate. A contact-type ultrasonic transducer with a control system to vary the frequency and power of the vibration was used. The effects of ultrasonic vibration were determined from the statistical analysis of microstructure and micro-indentation techniques on the deposited layer and heat-affected zone. It was found that both frequency and interaction between frequency and power had significant impact on the refinement of average grain size up to 10.64% and increased the number of grains by approximately 41.78%. Analysis of micro-indentation tests showed that there was an increase of approximately 14.30% in micro-hardness due to the applied frequency during rapid solidification. A pole diagram shows that application of vibration causes randomization of grain orientation. Along with the results from this study, further efforts in modeling and experimentation of multi-directional vibrations would lead to a better understanding of disrupting columnar grains in applications that use mechanical vibrations, such as welding, directed energy deposition, brazing, etc.

  14. Inner Ear Morphology in the Atlantic Molly Poecilia mexicana—First Detailed Microanatomical Study of the Inner Ear of a Cyprinodontiform Species

    PubMed Central

    Schulz-Mirbach, Tanja; Heß, Martin; Plath, Martin

    2011-01-01

    Background Fishes show an amazing diversity in hearing abilities, inner ear structures, and otolith morphology. Inner ear morphology, however, has not yet been investigated in detail in any member of the diverse order Cyprinodontiformes. We, therefore, studied the inner ear of the cyprinodontiform freshwater fish Poecilia mexicana by analyzing the position of otoliths in situ, investigating the 3D structure of sensory epithelia, and examining the orientation patterns of ciliary bundles of the sensory hair cells, while combining μ-CT analyses, scanning electron microscopy, and immunocytochemical methods. P. mexicana occurs in different ecotypes, enabling us to study the intra-specific variability (on a qualitative basis) of fish from regular surface streams, and the Cueva del Azufre, a sulfidic cave in southern Mexico. Results The inner ear of Poecilia mexicana displays a combination of several remarkable features. The utricle is connected rostrally instead of dorso-rostrally to the saccule, and the macula sacculi, therefore, is very close to the utricle. Moreover, the macula sacculi possesses dorsal and ventral bulges. The two studied ecotypes of P. mexicana showed variation mainly in the shape and curvature of the macula lagenae, in the curvature of the macula sacculi, and in the thickness of the otolithic membrane. Conclusions Our study for the first time provides detailed insights into the auditory periphery of a cyprinodontiform inner ear and thus serves a basis—especially with regard to the application of 3D techniques—for further research on structure-function relationships of inner ears within the species-rich order Cyprinodontiformes. We suggest that other poeciliid taxa, or even other non-poeciliid cyprinodontiforms, may display similar inner ear morphologies as described here. PMID:22110746

  15. Evaluating the addition of positive reinforcement for learning a frightening task: a pilot study with horses.

    PubMed

    Heleski, Camie; Bauson, Laura; Bello, Nora

    2008-01-01

    Horse training often relies upon negative reinforcement (NR). This study tested the hypothesis that adding positive reinforcement (PR) to NR would enhance learning in horses (n = 34) being taught to walk over a tarp (novel/typically frightening task). Subjects were Arabians, and the same person handled all of them. This person handled half "traditionally" (NR only)--that is, halter/lead were pulled; when horse stepped forward, pressure was released; process repeated until criterion met (horse crossed the tarp with little/no obvious anxiety). The same person handled the other half traditionally--but with addition of PR < food + verbal praise > (NR + PR). Subjects "failed" the task if they refused to walk onto the tarp after 10 min. Nine horses failed; 6 of 9 failures were from NR only--no significant difference detected (p = .41). The study detected no difference in time to first crossing of the tarp (p = .30) or total time to achieve calmness criterion (p = .67). Overall, adding PR did not significantly enhance learning this task. However, there were practical implications--adding PR made the task safer/less fatiguing for the handler. PMID:18569217

  16. Evaluating the addition of positive reinforcement for learning a frightening task: a pilot study with horses.

    PubMed

    Heleski, Camie; Bauson, Laura; Bello, Nora

    2008-01-01

    Horse training often relies upon negative reinforcement (NR). This study tested the hypothesis that adding positive reinforcement (PR) to NR would enhance learning in horses (n = 34) being taught to walk over a tarp (novel/typically frightening task). Subjects were Arabians, and the same person handled all of them. This person handled half "traditionally" (NR only)--that is, halter/lead were pulled; when horse stepped forward, pressure was released; process repeated until criterion met (horse crossed the tarp with little/no obvious anxiety). The same person handled the other half traditionally--but with addition of PR < food + verbal praise > (NR + PR). Subjects "failed" the task if they refused to walk onto the tarp after 10 min. Nine horses failed; 6 of 9 failures were from NR only--no significant difference detected (p = .41). The study detected no difference in time to first crossing of the tarp (p = .30) or total time to achieve calmness criterion (p = .67). Overall, adding PR did not significantly enhance learning this task. However, there were practical implications--adding PR made the task safer/less fatiguing for the handler.

  17. Synthesis, Characterization, Molecular Modeling, and DNA Interaction Studies of Copper Complex Containing Food Additive Carmoisine Dye.

    PubMed

    Shahabadi, Nahid; Akbari, Alireza; Jamshidbeigi, Mina; Khodarahmi, Reza

    2016-06-01

    A copper complex of carmoisine dye; [Cu(carmoisine)2(H2O)2]; was synthesized and characterized by using physico-chemical and spectroscopic methods. The binding of this complex with calf thymus (ct) DNA was investigated by circular dichroism, absorption studies, emission spectroscopy, and viscosity measurements. UV-vis results confirmed that the Cu complex interacted with DNA to form a ground-state complex and the observed binding constant (2× 10(4) M(-1)) is more in keeping with the groove bindings with DNA. Furthermore, the viscosity measurement result showed that the addition of complex causes no significant change on DNA viscosity and it indicated that the intercalation mode is ruled out. The thermodynamic parameters are calculated by van't Hoff equation, which demonstrated that hydrogen bonds and van der Waals interactions played major roles in the reaction. The results of circular dichroism (CD) suggested that the complex can change the conformation of DNA from B-like form toward A-like conformation. The cytotoxicity studies of the carmoisine dye and its copper complex indicated that both of them had anticancer effects on HT-29 (colon cancer) cell line and they may be new candidates for treatment of the colon cancer.

  18. Density functional theory study of the effects of alloying additions on sulfur adsorption on nickel surfaces

    NASA Astrophysics Data System (ADS)

    Malyi, Oleksandr I.; Chen, Zhong; Kulish, Vadym V.; Bai, Kewu; Wu, Ping

    2013-01-01

    Reactions of hydrogen sulfide (H2S) with Nickel/Ytrria-doped zirconia (Ni/YDZ) anode materials might cause degradation of the performance of solid oxide fuel cells when S containing fuels are used. In this paper, we employ density functional theory to investigate S adsorption on metal (M)-doped and undoped Ni(0 0 1) and Ni(1 1 1) surfaces. Based on the performed calculations, we analyze the effects of 12 alloying additions (Ag, Au, Al, Bi, Cd, Co, Cu, Fe, Sn, Sb, V, and Zn) on the temperature of transition between clean (S atoms do not adsorb on the surfaces) and contaminated (S atoms can adsorb on the surfaces spontaneously) M-doped Ni surfaces for different concentrations of H2S in the fuel. Predicted results are consistent with many experimental studies relevant to S poisoning of both Ni/YDZ and M-doped Ni/YDZ anode materials. This study is important to understand S poisoning phenomena and to develop new S tolerant anode materials.

  19. Synthesis, Characterization, Molecular Modeling, and DNA Interaction Studies of Copper Complex Containing Food Additive Carmoisine Dye.

    PubMed

    Shahabadi, Nahid; Akbari, Alireza; Jamshidbeigi, Mina; Khodarahmi, Reza

    2016-06-01

    A copper complex of carmoisine dye; [Cu(carmoisine)2(H2O)2]; was synthesized and characterized by using physico-chemical and spectroscopic methods. The binding of this complex with calf thymus (ct) DNA was investigated by circular dichroism, absorption studies, emission spectroscopy, and viscosity measurements. UV-vis results confirmed that the Cu complex interacted with DNA to form a ground-state complex and the observed binding constant (2× 10(4) M(-1)) is more in keeping with the groove bindings with DNA. Furthermore, the viscosity measurement result showed that the addition of complex causes no significant change on DNA viscosity and it indicated that the intercalation mode is ruled out. The thermodynamic parameters are calculated by van't Hoff equation, which demonstrated that hydrogen bonds and van der Waals interactions played major roles in the reaction. The results of circular dichroism (CD) suggested that the complex can change the conformation of DNA from B-like form toward A-like conformation. The cytotoxicity studies of the carmoisine dye and its copper complex indicated that both of them had anticancer effects on HT-29 (colon cancer) cell line and they may be new candidates for treatment of the colon cancer. PMID:27152751

  20. Percutaneous Dorsal Instrumentation of Vertebral Burst Fractures: Value of Additional Percutaneous Intravertebral Reposition—Cadaver Study

    PubMed Central

    Krüger, Antonio; Schmuck, Maya; Noriega, David C.; Ruchholtz, Steffen; Baroud, Gamal; Oberkircher, Ludwig

    2015-01-01

    Purpose. The treatment of vertebral burst fractures is still controversial. The aim of the study is to evaluate the purpose of additional percutaneous intravertebral reduction when combined with dorsal instrumentation. Methods. In this biomechanical cadaver study twenty-eight spine segments (T11-L3) were used (male donors, mean age 64.9 ± 6.5 years). Burst fractures of L1 were generated using a standardised protocol. After fracture all spines were allocated to four similar groups and randomised according to surgical techniques (posterior instrumentation; posterior instrumentation + intravertebral reduction device + cement augmentation; posterior instrumentation + intravertebral reduction device without cement; and intravertebral reduction device + cement augmentation). After treatment, 100000 cycles (100–600 N, 3 Hz) were applied using a servohydraulic loading frame. Results. Overall anatomical restoration was better in all groups where the intravertebral reduction device was used (p < 0.05). In particular, it was possible to restore central endplates (p > 0.05). All techniques decreased narrowing of the spinal canal. After loading, clearance could be maintained in all groups fitted with the intravertebral reduction device. Narrowing increased in the group treated with dorsal instrumentation. Conclusions. For height and anatomical restoration, the combination of an intravertebral reduction device with dorsal instrumentation showed significantly better results than sole dorsal instrumentation. PMID:26137481

  1. A sedimentological approach to hydrologic characterization: A detailed three-dimensional study of an outcrop of the Sierra Ladrones Formation, Albuquerque basin

    SciTech Connect

    Lohmann, R.C.

    1992-01-01

    Three-dimensional geologic outcrop studies which quantitatively describe the geologic architecture of deposits of a specific depositional environment are a necessary requirement for characterization of the permeability structure of an aquifer. The objective of this study is to address this need for quantitative, three-dimensional outcrop studies. For this study, a 10,000 m{sup 2} by 25 m high outcrop of Pliocene-Pleistocene Sierra Ladrones Formation located near Belen, New Mexico was mapped in detail, and the geologic architecture was quantified using geostatistical variogram analysis. In general, the information contained in this study should be useful for hydrologists working on the characterization of aquifers from similar depositional environments such as this one. However, for the permeability correlation study to be truly useful, the within-element correlation structure needs to be superimposed on the elements themselves instead of using mean log (k) values, as was done for this study. Such information is derived from outcrop permeability sampling such as the work of Davis (1990) and Goggin et al. (1988).

  2. Experimental study of enhanced heat transfer by addition of CuO nanoparticle

    NASA Astrophysics Data System (ADS)

    Jesumathy, Stella; Udayakumar, M.; Suresh, S.

    2012-06-01

    An energy storage system has been designed to study the thermal characteristics of paraffin wax with an embedded nano size copper oxide (CuO) particle. This paper presents studies conducted on phase transition times, heat fraction as well as heat transfer characteristics of paraffin wax as phase change material (PCM) embedded with CuO nanoparticles. 40 nm mean size CuO particles of 2, 5 and 10% by weight were dispersed in PCM for this study. Experiments were performed on a heat exchanger with 1.5-10 l/min of heat transfer fluid (HTF) flow. Time-based variations of the temperature distributions are revealed from the results of observations of melting and solidification curves. The results strongly suggested that the thermal conductivity enhances 6, 6.7 and 7.8% in liquid state and in dynamic viscosity it enhances by 5, 14 and 30% with increasing mass fraction of the CNEPs. The thermal conductivity ratio of the composites can be augmented by a factor up to 1.3. The heat transfer coefficient during solidification increased about 78% for the maximum flow rate. The analysis of experimental results reveals that the addition of copper oxide nanoparticles to the paraffin wax enhances both the conduction and natural convection very effectively in composites and in paraffin wax. The paraffin wax-based composites have great potential for energy storage applications like industrial waste heat recovery, solar thermal applications and solar based dynamic space power generation with optimal fraction of copper oxide nanoparticles.

  3. Increased Risk of Additional Cancers Among Patients with Gastrointestinal Stromal Tumors: A Population-Based Study

    PubMed Central

    Murphy, James D.; Ma, Grace L.; Baumgartner, Joel M.; Madlensky, Lisa; Burgoyne, Adam M.; Tang, Chih-Min; Martinez, Maria Elena; Sicklick, Jason K.

    2015-01-01

    Purpose Most gastrointestinal stromal tumors (GIST) are considered non-hereditary or sporadic. However, single-institution studies suggest that GIST patients develop additional malignancies with increased frequencies. We hypothesized that we could gain greater insight into possible associations between GIST and other malignancies using a national cancer database inquiry. Methods Patients diagnosed with GIST (2001–2011) in the Surveillance, Epidemiology, and End Results database were included. Standardized prevalence ratios (SPRs) and standardized incidence ratios (SIRs) were used to quantify cancer risks incurred by GIST patients before and after GIST diagnoses, respectively, when compared with the general U.S. population. Results Of 6,112 GIST patients, 1,047 (17.1%) had additional cancers. There were significant increases in overall cancer rates: 44% (SPR=1.44) before diagnosis and 66% (SIR=1.66) after GIST diagnoses. Malignancies with significantly increased occurrence both before/after diagnoses included other sarcomas (SPR=5.24/SIR=4.02), neuroendocrine-carcinoid tumors (SPR=3.56/SIR=4.79), non-Hodgkin’s lymphoma (SPR=1.69/SIR=1.76), and colorectal adenocarcinoma (SPR=1.51/SIR=2.16). Esophageal adenocarcinoma (SPR=12.0), bladder adenocarcinoma (SPR=7.51), melanoma (SPR=1.46), and prostate adenocarcinoma (SPR=1.20) were significantly more common only before GIST. Ovarian carcinoma (SIR=8.72), small intestine adenocarcinoma (SIR=5.89), papillary thyroid cancer (SIR=5.16), renal cell carcinoma (SIR=4.46), hepatobiliary adenocarcinomas (SIR=3.10), gastric adenocarcinoma (SIR=2.70), pancreatic adenocarcinoma (SIR=2.03), uterine adenocarcinoma (SIR=1.96), non-small cell lung cancer (SIR=1.74), and transitional cell carcinoma of the bladder (SIR=1.65) were significantly more common only after GIST. Conclusion This is the first population-based study to characterize the associations and temporal relationships between GIST and other cancers, both by site and

  4. 78 FR 68461 - Guidance for Industry: Studies To Evaluate the Utility of Anti-Salmonella Chemical Food Additives...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ... Anti- Salmonella Chemical Food Additives in Feeds; Request for Comments AGENCY: Food and Drug... Chemical Food Additives in Feeds,'' and is seeking comments on this guidance before revisions are made... Guidance for Industry: Studies to Evaluate the Utility of Anti-Salmonella Chemical Food Additives in...

  5. Detail of Triton

    NASA Technical Reports Server (NTRS)

    1998-01-01

    This color photo of Neptune's large satellite Triton was obtained on Aug. 24 1989 at a range of 530,000 kilometers (330,000 miles). The resolution is about 10 kilometers (6.2 miles), sufficient to begin to show topographic detail. The image was made from pictures taken through the green, violet and ultraviolet filters. In this technique, regions that are highly reflective in the ultraviolet appear blue in color. In reality, there is no part of Triton that would appear blue to the eye. The bright southern hemisphere of Triton, which fills most of this frame, is generally pink in tone as is the even brighter equatorial band. The darker regions north of the equator also tend to be pink or reddish in color. JPL manages the Voyager project for NASA's Office of Space Science, Washington, DC.

  6. Beyond the Call of Duty: A Qualitative Study of Teachers' Additional Responsibilities Related to Sexuality Education

    ERIC Educational Resources Information Center

    Eisenberg, Marla E.; Madsen, Nikki; Oliphant, Jennifer A.; Resnick, Michael

    2011-01-01

    Seven focus groups were conducted with sexuality educators in Minnesota to explore ways that teaching sexuality education differs from teaching other health education content and to determine if additional supports or resources are needed for sexuality educators. Teachers described many specific additional responsibilities or concerns related to…

  7. Addition reaction of alkyl radical to C60 fullerene: Density functional theory study

    NASA Astrophysics Data System (ADS)

    Tachikawa, Hiroto; Kawabata, Hiroshi

    2016-02-01

    Functionalized fullerenes are known as a high-performance molecules. In this study, the alkyl-functionalized fullerenes (denoted by R-C60) have been investigated by means of the density functional theory (DFT) method to elucidate the effects of functionalization on the electronic states of fullerene. Also, the reaction mechanism of alkyl radicals with C60 was investigated. The methyl, ethyl, propyl, and butyl radicals (denoted by n = 1-4, where n means the number of carbon atoms in the alkyl radical) were examined as alkyl radicals. The DFT calculation showed that the alkyl radical binds to the carbon atom of C60 at the on-top site, and a strong C-C single bond is formed. The binding energies of alkyl radicals to C60 were distributed in the range of 31.8-35.1 kcal mol-1 at the CAM-B3LYP/6-311G(d,p) level. It was found that the activation barrier exists before alkyl addition, the barrier heights were calculated to be 2.1-2.8 kcal mol-1. The electronic states of R-C60 complexes were discussed on the basis of the theoretical results.

  8. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol).

    PubMed

    Jones, Matthew; Li, Calvin H; Afjeh, Abdollah; Peterson, Gp

    2011-01-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results. PMID:21711760

  9. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol)

    NASA Astrophysics Data System (ADS)

    Jones, Matthew; Li, Calvin H.; Afjeh, Abdollah; Peterson, Gp

    2011-12-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results.

  10. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol)

    PubMed Central

    2011-01-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results. PMID:21711760

  11. Meiofaunal and bacterial community response to diesel additions in a microcosm study.

    PubMed

    Lindgren, J Fredrik; Hassellöv, Ida-Maja; Dahllöf, Ingela

    2012-03-01

    Effects of low PAH-containing diesel were studied in a 60-day microcosm experiment at PAH concentrations 130, 1300 and 13,000μg/kg sediment. Nutrient fluxes, potential nitrification and meiofaunal community composition were analysed at three time points. Changed ∑NOx-fluxes indicated reduced sediment nitrification in Medium and High with time, in agreement with lowered potential nitrification rates in all treatments. Reduction in silicate and phosphate fluxes over time suggested severe effects on activity of meiofauna. Reduced activity increased the anoxic sediment layer, which could have contributed to the changed ∑NOx-fluxes. There were significant differences in meiofaunal community composition after 30 and 60days in Medium and High. Changes were due to increasing numbers of harpacticoids and the foraminiferan group Rotaliina, as well as decreasing numbers of Nematodes and the foraminiferan group Reophax. In spite of the low PAH-level, small additions of this diesel can still have pronounced effects on meiofaunal and bacterial communities.

  12. A theoretical study of wave dispersion and thermal conduction for HMX/additive interfaces

    NASA Astrophysics Data System (ADS)

    Long, Yao; Chen, Jun

    2014-04-01

    The wave dispersion rule for non-uniform material is useful for ultrasonic inspection and engine life prediction, and also is key in achieving an understanding of the energy dissipation and thermal conduction properties of solid material. On the basis of linear response theory and molecular dynamics, we derive a set of formulas for calculating the wave dispersion rate of interface systems, and study four kinds of interfaces inside plastic bonded explosives: HMX/{HMX, TATB, F2312, F2313}. (HMX: octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine; TATB: 1,3,5-triamino-2,4,6-trinitrobenzene; F2312, F2313: fluoropolymers). The wave dispersion rate is obtained over a wide frequency range from kHz to PHz. We find that at low frequency, the rate is proportional to the square of the frequency, and at high frequency, the rate couples with the molecular vibration modes at the interface. By using the results, the thermal conductivities of HMX/additive interfaces are derived, and a physical model is built for describing the total thermal conductivity of mixture explosives, including HMX multi-particle systems and {TATB, F2312, F2313}-coated HMX.

  13. Horizontal Cross Bracing Detail, Vertical Cross Bracing Detail, Horizontal Cross ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Horizontal Cross Bracing Detail, Vertical Cross Bracing Detail, Horizontal Cross Bracing Joint, Vertical Cross Bracing End Detail - Ceylon Covered Bridge, Limberlost Park, spanning Wabash River at County Road 900 South, Geneva, Adams County, IN

  14. Formation of porous SnS nanoplate networks from solution and their application in hybrid solar cells† †Electronic supplementary information (ESI) available: Details to performed experiments and characterisation methods, additional XRD data, absorption spectra, TAS data and SEM images. See DOI: 10.1039/c5cc03125g Click here for additional data file.

    PubMed Central

    Gury, L.; Sánchez-Molina, I.; Martínez, L.

    2015-01-01

    Herein, we present a facile solution-based route towards nanostructured, hybrid absorber layers based on tin mono-sulfide (SnS), an emerging, non-toxic absorber material for low-cost and large-scale PV applications. Charge photogeneration properties in the hybrid system are studied using transient absorption spectroscopy and fabricated solar cells show efficient photocurrent generation over a broad spectral range. PMID:26016404

  15. Peer academic detailing on use of antibiotics in acute respiratory tract infections. A controlled study in an urban Norwegian out-of-hours service

    PubMed Central

    Dyrkorn, Roar; Gjelstad, Svein; Espnes, Ketil Arne; Lindbæk, Morten

    2016-01-01

    Objective To analyse if peer academic detailing by experienced general practitioners (GPs) could be a useful way to change Medical Doctors, (MDs) prescription of antibiotics for acute respiratory tract infections (ARTIs) in out-of-hours service. Method An educational Intervention study based on prescription data among MDs working in an out-of-hours service from June 2006 through October 2008. Specially trained GPs lectured a peer educational program (3 × 45 minutes) about use of antibiotics for ARTIs according to national recommendations. Outcome measures The type and frequency of antibiotics prescribed for different ARTIs before and after intervention comparing the intervention group with the control group. Subjects 22 MDs in the intervention group and 31 MDs in the control group. Results The intervention group showed an overall statistically significantly absolute increase in the use of penicillin V (Penicillin V) of 9.8% (95% CI: 2.3%–17.4% p < 0.05), and similarly an statistically significantly absolute decrease in the use of macrolides and lincosamides of 8.8% (95% CI: 2.6%–14.9.2% p < 0.05) for all diagnoses. For subgroups of ARTIs we found a significant increase in the use of Penicillin V for acute otitis media, sinusitis, pneumonia and upper ARTIs. There was no significant changes in total prescription rates in the two groups. 41% of all consultations with respiratory tract infections resulted in antibiotic prescription. Conclusions Using trained GPs to give peer academic detailing to colleagues in combination with open discussion on prescription, showed a significant change in prescription of antibiotics towards national guidelines. Key pointsPhenoxymethylpenicillin is the first choice for the most of respiratory tract infections when indicated.Despite the guidelines for the choice of antibiotics in Norway, general practitioners’ choice often differs from these.We showed that a session of three times 45 min of peer academic detailing

  16. roof truss detail, historic strap hinge detail Chopawamsic Recreational ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    roof truss detail, historic strap hinge detail - Chopawamsic Recreational Demonstration Area - Cabin Camp 1, Main Arts and Crafts Lodge, Prince William Forest Park, Triangle, Prince William County, VA

  17. Comparative study of trimethyl phosphite and trimethyl phosphate as electrolyte additives in lithium ion batteries

    NASA Astrophysics Data System (ADS)

    Yao, X. L.; Xie, S.; Chen, C. H.; Wang, Q. S.; Sun, J. H.; Li, Y. L.; Lu, S. X.

    Safety concerns of lithium ion batteries have been the key problems in their practical applications. Trimethyl phosphite (TMP(i)) and trimethyl phosphate (TMP(a)) were used as the electrolyte additives to improve the safety and electrochemical performance of lithium cells. Gallvanostatic cell cycling, flammability test and thermal stability measurements by means of accelerated rate calorimeter (ARC) and micro calorimeter were performed. It is found that both TMP(i) and TMP(a) reduce the flammability of the electrolyte. The TMP(i) additive not only enhances the thermal stability of the electrolyte, but also improves its electrochemical performance. The TMP(a) additive can improve the thermal stability of the electrolyte at the expense of some degree of degradation of its electrochemical performance. Therefore, TMP(i) is a better flame retardant additive in the electrolyte compared with TMP(a).

  18. Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

    PubMed

    Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

    2016-11-01

    Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile. PMID:27211646

  19. Fortification of yogurts with different antioxidant preservatives: A comparative study between natural and synthetic additives.

    PubMed

    Caleja, Cristina; Barros, Lillian; Antonio, Amilcar L; Carocho, Márcio; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

    2016-11-01

    Consumers demand more and more so-called "natural" products and, therefore, the aim of this work was to compare the effects of natural versus synthetic antioxidant preservatives in yogurts. Matricaria recutita L. (chamomile) and Foeniculum vulgare Mill. (fennel) decoctions were tested as natural additives, while potassium sorbate (E202) was used as a synthetic additive. The fortification of yogurts with natural and synthetic antioxidants did not cause significant changes in the yoghurt pH and nutritional value, in comparison with control samples (yogurt without any additive). However, the fortified yogurts showed higher antioxidant activity, mainly the yogurts with natural additives (and among these, the ones with chamomile decoction). Overall, it can be concluded that plant decoctions can be used to develop novel yogurts, by replacing synthetic preservatives and improving the antioxidant properties of the final product, without changing the nutritional profile.

  20. Chemostat Studies of TCE-Dehalogenating Anaerobic Consortia under Excess and Limited Electron Donor Addition

    NASA Astrophysics Data System (ADS)

    Semprini, L.; Azizian, M.; Green, J.; Mayer-Blackwell, K.; Spormann, A. M.

    2015-12-01

    Two cultures - the Victoria Strain (VS) and the Evanite Strain (EV), enriched with the organohalide respiring bacteria Dehalococcoides mccartyi - were grown in chemostats for more than 4 years at a mean cell residence time of 50 days. The slow doubling rate represents growth likely experienced in the subsurface. The chemostats were fed formate as an electron donor and trichloroethene (TCE) as the terminal electron acceptor. Under excess formate conditions, stable operation was observed with respect to TCE transformation, steady-state hydrogen (H2) concentrations (40 nM), and the structure of the dehalogenating community. Both cultures completely transformed TCE to ethene, with minor amounts of vinyl chloride (VC) observed, along with acetate formation. When formate was limited, TCE was transformed incompletely to ethene (40-60%) and VC (60- 40%), and H2 concentrations ranged from 1 to 3 nM. The acetate concentration dropped below detection. Batch kinetic studies of TCE transformation with chemostat harvested cells found transformation rates of c-DCE and VC were greatly reduced when the cells were grown with limited formate. Upon increasing formate addition to the chemostats, from limited to excess, essentially complete transformation of TCE to ethene was achieved. The increase in formate was associated with an increase in H2 concentration and the production of acetate. Results of batch kinetic tests showed increases in transformation rates for TCE and c-DCE by factors of 3.5 and 2.5, respectively, while VC rates increased by factors of 33 to 500, over a six month period. Molecular analysis of chemostat samples is being performed to quantify the changes in copy numbers of reductase genes and to determine whether shifts in the strains of Dehalococcoides mccartyi where responsible for the observed rate increases. The results demonstrate the importance of electron donor supply for successful in-situ remediation.

  1. Study of metal whiskers growth and mitigation technique using additive manufacturing

    NASA Astrophysics Data System (ADS)

    Gullapalli, Vikranth

    For years, the alloy of choice for electroplating electronic components has been tin-lead (Sn-Pb) alloy. However, the legislation established in Europe on July 1, 2006, required significant lead (Pb) content reductions from electronic hardware due to its toxic nature. A popular alternative for coating electronic components is pure tin (Sn). However, pure tin has the tendency to spontaneously grow electrically conductive Sn whisker during storage. Sn whisker is usually a pure single crystal tin with filament or hair-like structures grown directly from the electroplated surfaces. Sn whisker is highly conductive, and can cause short circuits in electronic components, which is a very significant reliability problem. The damages caused by Sn whisker growth are reported in very critical applications such as aircraft, spacecraft, satellites, and military weapons systems. They are also naturally very strong and are believed to grow from compressive stresses developed in the Sn coating during deposition or over time. The new directive, even though environmentally friendly, has placed all lead-free electronic devices at risk because of whisker growth in pure tin. Additionally, interest has occurred about studying the nature of other metal whiskers such as zinc (Zn) whiskers and comparing their behavior to that of Sn whiskers. Zn whiskers can be found in flooring of data centers which can get inside electronic systems during equipment reorganization and movement and can also cause systems failure. Even though the topic of metal whiskers as reliability failure has been around for several decades to date, there is no successful method that can eliminate their growth. This thesis will give further insights towards the nature and behavior of Sn and Zn whiskers growth, and recommend a novel manufacturing technique that has potential to mitigate metal whiskers growth and extend life of many electronic devices.

  2. A study of the electrochemistry of nickel hydroxide electrodes with various additives

    NASA Astrophysics Data System (ADS)

    Zhu, Wen-Hua; Ke, Jia-Jun; Yu, Hong-Mei; Zhang, Deng-Jun

    Nickel composite electrodes (NCE) with various additives are prepared by a chemical impregnation method from nitrate solutions on sintered porous plaques. The electrochemical properties, such as utilization of active material, swelling and the discharge potential of the nickel oxide electrode (NOE) are determined mainly through the composition of the active material and the characteristics of nickel plaques. Most additives (Mg, Ca, Sr, Ba, Zn, Cd, Co, Li and Al hydroxide) exert effects on the discharge potential and swelling of the NOE. Chemical co-precipitation with the addition of calcium, zinc, magnesium and barium hydroxide increases the discharge potential by more than 20 mV, but that with zinc hydroxide results in an obvious decrease of active-material utilization and that with calcium and magnesium hydroxide produces a larger increase of electrode thickness. The effects of anion additives are also examined. Less than 1% mol of NiS in the active material increases the discharge potential. Cadmium, cobalt and zinc hydroxide are excellent additives for preventing swelling of the NCE. Slow voltammetry (0.2 mV s -1) in 6 M KOH is applied to characterize the oxygen-evolving potential of the NCE. The difference between the oxygen-evolution potential and the potential of the oxidation peak for the NCE with additives of calcium, lithium, barium and aluminium hydroxide is at least + 60 mV.

  3. Brain Regions Involved in the Retrieval of Spatial and Episodic Details Associated with a Familiar Environment: An fMRI Study

    ERIC Educational Resources Information Center

    Hirshhorn, Marnie; Grady, Cheryl; Rosenbaum, R. Shayna; Winocur, Gordon; Moscovitch, Morris

    2012-01-01

    Functional magnetic resonance imaging (fMRI) was used to compare brain activity during the retrieval of coarse- and fine-grained spatial details and episodic details associated with a familiar environment. Long-time Toronto residents compared pairs of landmarks based on their absolute geographic locations (requiring either coarse or fine…

  4. Maltreated children's representations of mother and an additional caregiver: a longitudinal study.

    PubMed

    Manashko, Shany; Besser, Avi; Priel, Beatriz

    2009-04-01

    In the current longitudinal investigation, we explored the continuity of and changes in the mental representations of the mother and an additional caregiver among forty-five 9- to 11-year-old children who had been severely maltreated and subsequently placed in long-term residential care as well as the relationships between the content and structure of these representations and teacher's assessments of the child's externalizing and internalizing symptoms. At Time 1, a nonmaltreated comparison group was assessed concomitantly. Compared to nonmaltreated children, maltreated children scored higher for externalizing and internalizing symptoms, and their maternal representations were found to be significantly less benevolent and integrated and more punitive. In addition, among the maltreated children, the additional caregiver representations were found to be more benevolent and integrated, and less punitive, than the maternal representations. After 30 months, the maltreated children's levels of externalizing and internalizing symptoms diminished, their maternal representations become more benevolent and less punitive, and the additional caregiver representations became less benevolent. Moreover, the Benevolence of the additional caregiver representation was found to predict these children's changes in externalizing symptoms beyond the effects of their symptomatology and its associations with the Benevolence of these representations at Time 1. PMID:19220720

  5. Exploring the Milky Way stellar disk. A detailed elemental abundance study of 714 F and G dwarf stars in the solar neighbourhood

    NASA Astrophysics Data System (ADS)

    Bensby, T.; Feltzing, S.; Oey, M. S.

    2014-02-01

    Aims: The aim of this paper is to explore and map the age and abundance structure of the stars in the nearby Galactic disk. Methods: We have conducted a high-resolution spectroscopic study of 714 F and G dwarf and subgiant stars in the Solar neighbourhood. The star sample has been kinematically selected to trace the Galactic thin and thick disks to their extremes, the metal-rich stellar halo, sub-structures in velocity space such as the Hercules stream and the Arcturus moving group, as well as stars that cannot (kinematically) be associated with either the thin disk or the thick disk. The determination of stellar parameters and elemental abundances is based on a standard analysis using equivalent widths and one-dimensional, plane-parallel model atmospheres calculated under the assumption of local thermodynamical equilibrium (LTE). The spectra have high resolution (R = 40 000-110 000) and high signal-to-noise (S/N = 150-300) and were obtained with the FEROS spectrograph on the ESO 1.5 m and 2.2 m telescopes, the SOFIN and FIES spectrographs on the Nordic Optical Telescope, the UVES spectrograph on the ESO Very Large Telescope, the HARPS spectrograph on the ESO 3.6 m telescope, and the MIKE spectrograph on the Magellan Clay telescope. The abundances from individual Fe i lines were were corrected for non-LTE effects in every step of the analysis. Results: We present stellar parameters, stellar ages, kinematical parameters, orbital parameters, and detailed elemental abundances for O, Na, Mg, Al, Si, Ca, Ti, Cr, Fe, Ni, Zn, Y, and Ba for 714 nearby F and G dwarf stars. Our data show that there is an old and α-enhanced disk population, and a younger and less α-enhanced disk population. While they overlap greatly in metallicity between -0.7 < [Fe/H] ≲ +0.1, they show a bimodal distribution in [α/Fe]. This bimodality becomes even clearer if stars where stellar parameters and abundances show larger uncertainties (Teff ≲ 5400 K) are discarded, showing that it is

  6. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines.

    PubMed

    Gansäuer, Andreas; Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca; Grimme, Stefan

    2013-01-01

    The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol(-1) and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG (‡) and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically.

  7. Effect of stabilizing additives on the structure and hydration of proteins: a study involving monoclinic lysozyme.

    PubMed

    Saraswathi, N T; Sankaranarayanan, R; Vijayan, M

    2002-07-01

    In pursuance of a long-range programme on the hydration, mobility and action of proteins, the structural basis of the stabilizing effect of sugars and polyols is being investigated. With two crystallographically independent molecules with slightly different packing environments in the crystal, monoclinic lysozyme constitutes an ideal system for exploring the problem. The differences in the structure and hydration of the two molecules provide a framework for examining the changes caused by stabilizing additives. Monoclinic crystals were grown under native conditions and also in the presence of 10% sucrose, 15% trehalose, 10% trehalose, 10% sorbitol and 5% glycerol. The crystal structures were refined at resolutions ranging from 1.8 to 2.1 A. The average B values, and hence the mobility of the structure, are lower in the presence of additives than in the native crystals. However, a comparison of the structures indicates that the effect of the additives on the structure and the hydration shell around the protein molecule is considerably less than that caused by differences in packing. It is also less than that caused by the replacement of NaNO(3) by NaCl as the precipitant in the crystallization experiments. This result is not in conformity with the commonly held belief that additives exert their stabilizing effect through the reorganization of the hydration shell, at least as far as the ordered water molecules are concerned.

  8. Studies on the Food Additive Propyl Gallate: Synthesis, Structural Characterization, and Evaluation of the Antioxidant Activity

    ERIC Educational Resources Information Center

    Garrido, Jorge; Garrido, E. Manuela; Borges, Fernanda

    2012-01-01

    Antioxidants are additives largely used in industry for delaying, retarding, or preventing the development of oxidative deterioration. Propyl gallate (E310) is a phenolic antioxidant extensively used in the food, cosmetics, and pharmaceutical industries. A series of lab experiments have been developed to teach students about the importance and…

  9. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines.

    PubMed

    Gansäuer, Andreas; Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca; Grimme, Stefan

    2013-01-01

    The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol(-1) and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG (‡) and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically. PMID:24062821

  10. Vector generalized additive models for extreme rainfall data analysis (study case rainfall data in Indramayu)

    NASA Astrophysics Data System (ADS)

    Utami, Eka Putri Nur; Wigena, Aji Hamim; Djuraidah, Anik

    2016-02-01

    Rainfall pattern are good indicators for potential disasters. Global Circulation Model (GCM) contains global scale information that can be used to predict the rainfall data. Statistical downscaling (SD) utilizes the global scale information to make inferences in the local scale. Essentially, SD can be used to predict local scale variables based on global scale variables. SD requires a method to accommodate non linear effects and extreme values. Extreme value Theory (EVT) can be used to analyze the extreme value. One of methods to identify the extreme events is peak over threshold that follows Generalized Pareto Distribution (GPD). The vector generalized additive model (VGAM) is an extension of the generalized additive model. It is able to accommodate linear or nonlinear effects by involving more than one additive predictors. The advantage of VGAM is to handle multi response models. The key idea of VGAM are iteratively reweighted least square for maximum likelihood estimation, penalized smoothing, fisher scoring and additive models. This works aims to analyze extreme rainfall data in Indramayu using VGAM. The results show that the VGAM with GPD is able to predict extreme rainfall data accurately. The prediction in February is very close to the actual value at quantile 75.

  11. Teaching Young Children Decomposition Strategies to Solve Addition Problems: An Experimental Study

    ERIC Educational Resources Information Center

    Cheng, Zi-Juan

    2012-01-01

    The ability to count has traditionally been considered an important milestone in children's development of number sense. However, using counting (e.g., counting on, counting all) strategies to solve addition problems is not the best way for children to achieve their full mathematical potential and to prepare them to develop more complex and…

  12. Study on automatic optical element addition or deletion in lens optimization

    NASA Astrophysics Data System (ADS)

    Cheng, Xuemin; Wang, Yongtian; Hao, Qun

    2002-09-01

    Two lens form parameters, quantifying the symmetry of the optical system and the optical power distribution among the individual lens elements, are used as the criteria for automatic element addition or deletion in lens optimization. The scheme based on the criteria is described in this paper. Design examples are provided, which demonstrate that the scheme is practicable.

  13. Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines

    PubMed Central

    Seddiqzai, Meriam; Dahmen, Tobias; Sure, Rebecca

    2013-01-01

    Summary The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol−1 and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG ‡ and ΔG R) are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically. PMID:24062821

  14. A laboratory study of the perceived benefit of additional noise attenuation by houses

    NASA Technical Reports Server (NTRS)

    Flindell, I. H.

    1983-01-01

    Two Experiments were conducted to investigate the perceived benefit of additional house attenuation against aircraft flyover noise. First, subjects made annoyance judgments in a simulated living room while an operative window with real and dummy storm windows was manipulated in full view of those subjects. Second, subjects made annoyance judgments in an anechoic audiometric test chamber of frequency shaped noise signals having spectra closely matched to those of the aircraft flyover noises reproduced in the first experiment. These stimuli represented the aircraft flyover noises in levels and spectra but without the situational and visual cues present in the simulated living room. Perceptual constancy theory implies that annoyance tends to remain constant despite reductions in noise level caused by additional attenuation of which the subjects are fully aware. This theory was supported when account was taken for a reported annoyance overestimation for certain spectra and for a simulated condition cue overreaction.

  15. A laboratory study of the perceived benefit of additional noise attenuation by houses

    NASA Astrophysics Data System (ADS)

    Flindell, I. H.

    1983-06-01

    Two Experiments were conducted to investigate the perceived benefit of additional house attenuation against aircraft flyover noise. First, subjects made annoyance judgments in a simulated living room while an operative window with real and dummy storm windows was manipulated in full view of those subjects. Second, subjects made annoyance judgments in an anechoic audiometric test chamber of frequency shaped noise signals having spectra closely matched to those of the aircraft flyover noises reproduced in the first experiment. These stimuli represented the aircraft flyover noises in levels and spectra but without the situational and visual cues present in the simulated living room. Perceptual constancy theory implies that annoyance tends to remain constant despite reductions in noise level caused by additional attenuation of which the subjects are fully aware. This theory was supported when account was taken for a reported annoyance overestimation for certain spectra and for a simulated condition cue overreaction.

  16. Thiopeptin, a New Feed-Additive Antibiotic: Biological Studies and Field Trials

    PubMed Central

    Mine, K.; Miyairi, N.; Takano, N.; Mori, S.; Watanabe, N.

    1972-01-01

    Thiopeptin is a new antibiotic, produced by Streptomyces tateyamensis and developed solely for animal use as a feed additive. The antibiotic content in animal tissue and feed was assayed in terms of the antimicrobial activity against Mycoplasma laidlawii A. This antibiotic was found to be relatively nontoxic in rats and mice. In chickens, this antibiotic is excreted into feces within 48 hr of administration and is not absorbed in tissue. It is well tolerated in both broilers and swine and is highly stable in animal feed. Thiopeptin-supplemented feed contributes to the improvement of weight gain, feed efficiency in chickens and swine, and the egg performance in layers. Thus, thiopeptin, when used as a feed additive, is quite suitable for supplementing animal nutrition. PMID:4680812

  17. Detailed study of water quality, bottom sediment, and biota associated with irrigation drainage in the Salton Sea area, California, 1988-90

    USGS Publications Warehouse

    Setmire, J.G.; Schroeder, R.A.; Densmore, J.N.; Goodbred, S.O.; Audet, D.J.; Radke, W.R.

    1993-01-01

    Results of a detailed study by the National Irrigation Water-Quality Program (NIWQP), U.S. Department of the Interior, indicate that factors controlling contaminant concentrations in subsurface irrigation drainwater in the Imperial Valley are soil characteristics, hydrology, and agricultural practices. Higher contaminant concentrations commonly were associated with clayey soils, which retard the movement of irrigation water and thus increase the degree of evaporative concentration. Regression of hydrogen- and oxygen-isotope ratios in samples collected from sumps yields a linear drainwater evaporation line that extrapolates through the isotopic composition of Colorado River water, thus demonstrating that Colorado River water is the sole source of subsurface drainwater in the Imperial Valley. Ratios of selenium to chloride indicate that selenium present in subsurface drainwater throughout the Imperial Valley originates from the Colorado River. The selenium load discharged to the Salton Sea from the Alamo River, the largest contributor, is about 6.5 tons/yr. Biological sampling and analysis showed that drainwater contaminants, including selenium, boron, and DDE, are accumulating in tissues of migratory and resident birds that use food sources in the Imperial Valley and the Salton Sea. Selenium concentration in fish-eating birds, shorebirds, and the endangered Yuma clapper rail were at levels that could affect reproduction. Boron concentrations in migratory waterfowl and resident shorebirds were at levels that potentially could cause reduced growth in young. As a result of DDE contamination of food sources, waterfowl and fish-eating birds in the Imperial Valley may be experiencing reproductive impairment.

  18. Physical, chemical, and biological data for detailed study of irrigation drainage in the Klamath Basin, California and Oregon, 1990-92

    USGS Publications Warehouse

    MacCoy, D.E.

    1994-01-01

    Physical, chemical, and biological data were collected between 1990 and 1992 as part of a detailed study by the U.S. Department of Interior of the effects of irrigation drainage on aquatic resources in the Klamath Basin of California and Oregon. Most of the sites for data collection were in and around the upper and lower sump of Tule Lake, in the Tule Lake National Wildlife Refuge, and along major drains in Lower Klamath National Wildlife Refuge. The physical and chemical data consist of particle-size determinations and concentrations of carbon, mercury, arsenic, chlorophenoxy acid, and organochlorine, organophosphate, and carbamate pesticides in bottom sediment; and concentrations of organophosphate, carbamate, and pyrethroid pesticides, major and trace inorganic constituents, nitrogen, phosphorus, and organic carbon in water. Continuous dissolved oxygen, pH, specific conduc- tance, and temperature data from selected sites in 1991 and 1992 are presented in graphical form to summarize the diel water-quality conditions. The biological data consists of concentrations of inorganic constituents and organochlorine pesticides in tissue, invertebrate and fish population surveys, fish health surveys, frog call surveys, egg shell thickness of avian eggs, and in situ and static toxicity bioassay data collected in 1991 and 1992 using aquatic bacteria, plants, invertebrates, fish, and bird species as test organisms.

  19. Detailed Clinical Models: A Review

    PubMed Central

    Goossen-Baremans, Anneke; van der Zel, Michael

    2010-01-01

    Objectives Due to the increasing use of electronic patient records and other health care information technology, we see an increase in requests to utilize these data. A highly level of standardization is required during the gathering of these data in the clinical context in order to use it for analyses. Detailed Clinical Models (DCM) have been created toward this purpose and several initiatives have been implemented in various parts of the world to create standardized models. This paper presents a review of DCM. Methods Two types of analyses are presented; one comparing DCM against health care information architectures and a second bottom up approach from concept analysis to representation. In addition core parts of the draft ISO standard 13972 on DCM are used such as clinician involvement, data element specification, modeling, meta information, and repository and governance. Results Six initiatives were selected: Intermountain Healthcare, 13606/OpenEHR Archetypes, Clinical Templates, Clinical Contents Models, Health Level 7 templates, and Dutch Detailed Clinical Models. Each model selected was reviewed for their overall development, involvement of clinicians, use of data types, code bindings, expressing semantics, modeling, meta information, use of repository and governance. Conclusions Using both a top down and bottom up approach to comparison reveals many commonalties and differences between initiatives. Important differences include the use of or lack of a reference model and expressiveness of models. Applying clinical data element standards facilitates the use of conceptual DCM models in different technical representations. PMID:21818440

  20. Structural changes in gluten protein structure after addition of emulsifier. A Raman spectroscopy study

    NASA Astrophysics Data System (ADS)

    Ferrer, Evelina G.; Gómez, Analía V.; Añón, María C.; Puppo, María C.

    2011-06-01

    Food protein product, gluten protein, was chemically modified by varying levels of sodium stearoyl lactylate (SSL); and the extent of modifications (secondary and tertiary structures) of this protein was analyzed by using Raman spectroscopy. Analysis of the Amide I band showed an increase in its intensity mainly after the addition of the 0.25% of SSL to wheat flour to produced modified gluten protein, pointing the formation of a more ordered structure. Side chain vibrations also confirmed the observed changes.

  1. Magnetic Force Microscopy Study of Zr2Co11 -Based Nanocrystalline Materials: Effect of Mo Addition

    DOE PAGES

    Yue, Lanping; Jin, Yunlong; Zhang, Wenyong; Sellmyer, David J.

    2015-01-01

    Tmore » he addition of Molybdenum was used to modify the nanostructure and enhance coercivity of rare-earth-free Zr2Co11-based nanocrystalline permanent magnets. he effect of Mo addition on magnetic domain structures of melt spun nanocrystalline Zr16Co84-xMox(x=0, 0.5, 1, 1.5, and 2.0) ribbons has been investigated. It was found that magnetic properties and local domain structures are strongly influenced by Mo doping. he coercivity of the samples increases with the increase in Mo content (x≤1.5). he maximum energy product(BH)maxincreases with increasingxfrom 0.5 MGOe forx=0to a maximum value of 4.2 MGOe forx=1.5. he smallest domain size with a relatively short magnetic correlation length of 128 nm and largest root-mean-square phase shiftΦrmsvalue of 0.66° are observed for thex=1.5. he optimal Mo addition promotes magnetic domain structure refinement and thus leads to a significant increase in coercivity and energy product in this sample.« less

  2. Load bearing and stiffness tailored NiTi implants produced by additive manufacturing: a simulation study

    NASA Astrophysics Data System (ADS)

    Rahmanian, Rasool; Shayesteh Moghaddam, Narges; Haberland, Christoph; Dean, David; Miller, Michael; Elahinia, Mohammad

    2014-03-01

    Common metals for stable long-term implants (e.g. stainless steel, Titanium and Titanium alloys) are much stiffer than spongy cancellous and even stiffer than cortical bone. When bone and implant are loaded this stiffness mismatch results in stress shielding and as a consequence, degradation of surrounding bony structure can lead to disassociation of the implant. Due to its lower stiffness and high reversible deformability, which is associated with the superelastic behavior, NiTi is an attractive biomaterial for load bearing implants. However, the stiffness of austenitic Nitinol is closer to that of bone but still too high. Additive manufacturing provides, in addition to the fabrication of patient specific implants, the ability to solve the stiffness mismatch by adding engineered porosity to the implant. This in turn allows for the design of different stiffness profiles in one implant tailored to the physiological load conditions. This work covers a fundamental approach to bring this vision to reality. At first modeling of the mechanical behavior of different scaffold designs are presented as a proof of concept of stiffness tailoring. Based on these results different Nitinol scaffolds can be produced by additive manufacturing.

  3. Parameters and pitfalls to consider in the conduct of food additive research, Carrageenan as a case study.

    PubMed

    Weiner, Myra L

    2016-01-01

    This paper provides guidance on the conduct of new in vivo and in vitro studies on high molecular weight food additives, with carrageenan, the widely used food additive, as a case study. It is important to understand the physical/chemical properties and to verify the identity/purity, molecular weight and homogeneity/stability of the additive in the vehicle for oral delivery. The strong binding of CGN to protein in rodent chow or infant formula results in no gastrointestinal tract exposure to free CGN. It is recommended that doses of high Mw non-caloric, non-nutritive additives not exceed 5% by weight of total solid diet to avoid potential nutritional effects. Addition of some high Mw additives at high concentrations to liquid nutritional supplements increases viscosity and may affect palatability, caloric intake and body weight gain. In in vitro studies, the use of well-characterized, relevant cell types and the appropriate composition of the culture media are necessary for proper conduct and interpretation. CGN is bound to media protein and not freely accessible to cells in vitro. Interpretation of new studies on food additives should consider the interaction of food additives with the vehicle components and the appropriateness of the animal or cell model and dose-response.

  4. Parameters and pitfalls to consider in the conduct of food additive research, Carrageenan as a case study.

    PubMed

    Weiner, Myra L

    2016-01-01

    This paper provides guidance on the conduct of new in vivo and in vitro studies on high molecular weight food additives, with carrageenan, the widely used food additive, as a case study. It is important to understand the physical/chemical properties and to verify the identity/purity, molecular weight and homogeneity/stability of the additive in the vehicle for oral delivery. The strong binding of CGN to protein in rodent chow or infant formula results in no gastrointestinal tract exposure to free CGN. It is recommended that doses of high Mw non-caloric, non-nutritive additives not exceed 5% by weight of total solid diet to avoid potential nutritional effects. Addition of some high Mw additives at high concentrations to liquid nutritional supplements increases viscosity and may affect palatability, caloric intake and body weight gain. In in vitro studies, the use of well-characterized, relevant cell types and the appropriate composition of the culture media are necessary for proper conduct and interpretation. CGN is bound to media protein and not freely accessible to cells in vitro. Interpretation of new studies on food additives should consider the interaction of food additives with the vehicle components and the appropriateness of the animal or cell model and dose-response. PMID:26615870

  5. Theoretical study on the asymmetric Michael addition of cyclohexanone with trans-beta-nitrostyrene catalyzed by a pyrrolidine-type chiral ionic liquid.

    PubMed

    Sun, Hui; Zhang, Dongju; Zhang, Changqiao; Liu, Chengbu

    2010-10-01

    The Michael addition of cyclohexanone with trans-beta-nitrostyrene catalyzed by a chiral ionic liquid (CIL) pyrrolidine-imidazolium bromide, which represents a prototype of CIL-promoted asymmetric syntheses, has been investigated by performing density functional theory calculations. We show the details of the mechanism and energetics, the influence of the acid additive on the reactivity, and the functional role of the CIL in the asymmetric addition. It is found that the reaction proceeds via two stages, i.e., the initial enamine formation, where the imine complex is first created and then isomerizes into the enamine intermediate, and the subsequent Michael addition involving a three-step mechanism. The calculations show that the presence of the acid additive changes the imine formation mechanism and lowers the reaction barrier, as well as, more importantly, makes the reaction become highly thermodynamically favored. It is also suggested that both the anion and cation of the CIL synergically facilitate the reaction, which act as the proton acceptor in the imine-enamine tautomerism and the stabilizer of the negative charge in the C-C bond formation process, respectively. The present theoretical study rationalizes the early experimental findings well and provides aid to some extent for the rational design of efficient CIL catalysts.

  6. Strategic Petroleum Reserve (SPR) additional geologic site characterization studies, Bryan Mound Salt Dome, Texas

    SciTech Connect

    Neal, J.T.; Magorian, T.R.; Ahmad, S.

    1994-11-01

    This report revises the original report that was published in 1980. Some of the topics covered in the earlier report were provisional and it is now practicable to reexamine them using new or revised geotechnical data and that obtained from SPR cavern operations, which involves 16 new caverns. Revised structure maps and sections show interpretative differences as compared with the 1980 report and more definition in the dome shape and caprock structural contours, especially a major southeast-northwest trending anomalous zone. The original interpretation was of westward tilt of the dome, this revision shows a tilt to the southeast, consistent with other gravity and seismic data. This interpretation refines the evaluation of additional cavern space, by adding more salt buffer and allowing several more caverns. Additional storage space is constrained on this nearly full dome because of low-lying peripheral wetlands, but 60 MMBBL or more of additional volume could be gained in six or more new caverns. Subsidence values at Bryan Mound are among the lowest in the SPR system, averaging about 11 mm/yr (0.4 in/yr), but measurement and interpretation issues persist, as observed values are about the same as survey measurement accuracy. Periodic flooding is a continuing threat because of the coastal proximity and because peripheral portions of the site are at elevations less than 15 ft. This threat may increase slightly as future subsidence lowers the surface, but the amount is apt to be small. Caprock integrity may be affected by structural features, especially the faulting associated with anomalous zones. Injection wells have not been used extensively at Bryan Mound, but could be a practicable solution to future brine disposal needs. Environmental issues center on the areas of low elevation that are below 15 feet above mean sea level: the coastal proximity and lowland environment combined with the potential for flooding create conditions that require continuing surveillance.

  7. The influence of bioaugmentation and biosurfactant addition on bioremediation efficiency of diesel-oil contaminated soil: feasibility during field studies.

    PubMed

    Szulc, Alicja; Ambrożewicz, Damian; Sydow, Mateusz; Ławniczak, Łukasz; Piotrowska-Cyplik, Agnieszka; Marecik, Roman; Chrzanowski, Łukasz

    2014-01-01

    The study focused on assessing the influence of bioaugmentation and addition of rhamnolipids on diesel oil biodegradation efficiency during field studies. Initial laboratory studies (measurement of emitted CO2 and dehydrogenase activity) were carried out in order to select the consortium for bioaugmentation as well as to evaluate the most appropriate concentration of rhamnolipids. The selected consortium consisted of following bacterial taxa: Aeromonas hydrophila, Alcaligenes xylosoxidans, Gordonia sp., Pseudomonas fluorescens, Pseudomonas putida, Rhodococcus equi, Stenotrophomonas maltophilia, Xanthomonas sp. It was established that the application of rhamnolipids at 150 mg/kg of soil was most appropriate in terms of dehydrogenase activity. Based on the obtained results, four treatment methods were designed and tested during 365 days of field studies: I) natural attenuation; II) addition of rhamnolipids; III) bioaugmentation; IV) bioaugmentation and addition of rhamnolipids. It was observed that bioaugmentation contributed to the highest diesel oil biodegradation efficiency, whereas the addition of rhamnolipids did not notably influence the treatment process.

  8. Kaolinite flocculation induced by smectite addition - a transmission X-ray microscopic study.

    PubMed

    Zbik, Marek S; Song, Yen-Fang; Frost, Ray L

    2010-09-01

    The influence of smectite addition on kaolinite suspensions in water was investigated by transmission X-ray microscopy (TXM) and Scanning Electron Microscopy (SEM). Sedimentation test screening was also conducted. Micrographs were processed by the STatistic IMage Analysing (STIMAN) program and structural parameters were calculated. From the results of the sedimentation tests important influences of small smectite additions to about 3wt.% on kaolinite suspension flocculation has been found. In order to determine the reason for this smectite impact on kaolinite suspension, macroscopic behaviour micro-structural examination using Transmission X-ray Microscope (TXM) and SEM has been undertaken. TXM & SEM micrographs of freeze-dried kaolinite-smectite suspensions with up to 20% smectite showed a high degree of orientation of the fabric made of highly oriented particles and greatest density when 3wt.% of smectite was added to the 10wt.% dense kaolinite suspension. In contrast, suspensions containing pure kaolinite do not show such platelet mutual orientation but homogenous network of randomly oriented kaolinite platelets. This suggests that in kaolinite-smectite suspensions, smectite forms highly oriented basic framework into which kaolinite platelets may bond in face to face preferential contacts strengthening structure and allowing them to show plastic behaviour which is cause of platelets orientation. PMID:20621806

  9. Excitotoxic food additives--relevance of animal studies to human safety.

    PubMed

    Olney, J W

    1984-01-01

    Evidence is reviewed supporting the view that excitotoxic food additives pose a significant hazard to the developing nervous system of young children. The following points are stressed: (1) although blood-brain barriers protect most central neurons from excitotoxins, certain brain regions lack such protection (a characteristic common to all vertebrate species); (2) regardless of species, it requires only a transient increase in blood excitotoxin levels for neurons in unprotected brain regions to be "silently" destroyed; (3) humans may be at particularly high risk for this kind of brain damage, since ingestion of a given amount of excitotoxin causes much higher blood excitotoxin levels in humans than in other species; (4) in addition to the heightened risk on a species basis, risk may be further increased for certain consumer sub-populations due to youth, disease or genetic factors; (5) despite these reasons for maintaining a wide margin of safety in the use of excitotoxins in foods, no safety margin is currently being observed, i.e., a comparative evaluation of animal (extensive) and human (limited) data supports the conclusion that excitotoxins, as used in foods today, may produce blood elevations high enough to cause damage to the nervous system of young children, damage which is not detectable at the time of occurrence but which may give rise to subtle disturbances in neuroendocrine function in adolescence and/or adulthood.

  10. The fine structure of colleterial glands in two cockroaches and three termites, including a detailed study of Cryptocercus punctulatus (Blattaria, Cryptocercidae) and Mastotermes darwiniensis (Isoptera, Mastotermitidae).

    PubMed

    Courrent, Annie; Quennedey, André; Nalepa, Christine A; Robert, Alain; Lenz, Michael; Bordereau, Christian

    2008-01-01

    The colleterial glands of insects are organs associated with the female genital apparatus. In cockroaches, these glands produce secretions that cover two parallel rows of eggs during oviposition, and in oviparous species, these secretions become the tanned, sculpted, rigid outer casing of the ootheca. The goal of this study was to compare the gross anatomy of the colleterial glands and the ultrastructure of their component tubules in the phylogenetically significant genera Cryptocercus (Blattaria) and Mastotermes (Isoptera). Recent studies indicate that cockroaches in the genus Cryptocercus are the sister group of termites, and Mastotermes is the only termite known to produce a cockroach-like ootheca. One additional oviparous cockroach, Therea, and two additional termites, Zootermopsis and Pseudacanthotermes, were also examined. As in other cockroaches, the colleterial glands of Cryptocercus and Therea are asymmetrical, with a well developed bipartite left gland and a smaller right gland. In the termites Mastotermes, Zootermopsis, and Pseudacanthotermes, the colleterial glands are composed of a well-developed, paired, anterior gland and a small posterior gland; histological staining and cytological evidence suggest that these are homologues of the left and the right colleterial glands of cockroaches, respectively. At the ultrastructural level, colleterial gland tubules are made of cells belonging to a modified class 1 type cell in the cockroaches, in Mastotermes, and in Zootermopsis; the latter lays its eggs singly, without a surrounding ootheca-like structure. In the advanced termite Pseudacanthotermes, the tubules are made of secretory units belonging to the class 3 cell type. This study demonstrates that the cytological characteristics of colleterial glands in basal termites are similar to those of cockroaches, whether the termite secretes an oothecal casing that covers two parallel rows of eggs, as in Mastotermes, or lays its eggs singly, as in Zootermopsis

  11. Detail, Scandia Hotel, view to southwest showing details of balloon ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail, Scandia Hotel, view to southwest showing details of balloon framing, including full two-story studs notched to carry girts supporting second story floor joists (210mm lens) - Scandia Hotel, 225 First Street, Eureka, Humboldt County, CA

  12. Detail East Pier Elevation, Transverse Section, Detail Roof Plan As ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail East Pier Elevation, Transverse Section, Detail Roof Plan As Found - Sulphite Railroad Bridge, Former Boston & Maine Railroad (originally Tilton & Franklin Railroad) spanning Winnipesautee River, Franklin, Merrimack County, NH

  13. Detail view of ornamental lighting detail of southwest corner of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of ornamental lighting detail of southwest corner of Sixth Street Bridge. Looking northeast - Sixth Street Bridge, Spanning 101 Freeway at Sixth Street, Los Angeles, Los Angeles County, CA

  14. 58. DETAIL OF PINION AND BULL GEARS: Detail view towards ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    58. DETAIL OF PINION AND BULL GEARS: Detail view towards northeast of the pinion and bull gears of the winding machinery. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

  15. 6. Detail of front entry on E elevation. Detail of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Detail of front entry on E elevation. Detail of round, terra cotta medallions on E elevation indicating date of building. - Central of Georgia Railway, Red (Administration) Building, 233 West Broad Street, Savannah, Chatham County, GA

  16. Detail of pumps in troughs, detail of truss attachment ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of pumps in troughs, detail of truss - attachment to the wall - as well as the troughs themselves. Interior of the main hatchery building, view to the east. - Prairie Creek Fish Hatchery, Hwy. 101, Orick, Humboldt County, CA

  17. Preliminary study of neutron absorption by concrete with boron carbide addition

    NASA Astrophysics Data System (ADS)

    Abdullah, Yusof; Ariffin, Fatin Nabilah Tajul; Hamid, Roszilah; Yusof, Mohd Reusmaazran; Zali, Nurazila Mat; Ahmad, Megat Harun Al Rashid Megat; Yazid, Hafizal; Ahmad, Sahrim; Mohamed, Abdul Aziz

    2014-02-01

    Concrete has become a conventional material in construction of nuclear reactor due to its properties like safety and low cost. Boron carbide was added as additives in the concrete construction as it has a good neutron absorption property. The sample preparation for concrete was produced with different weight percent of boron carbide powder content. The neutron absorption rate of these samples was determined by using a fast neutron source of Americium-241/Be (Am-Be 241) and detection with a portable backscattering neutron detector. Concrete with 20 wt % of boron carbide shows the lowest count of neutron transmitted and this indicates the most neutrons have been absorbed by the concrete. Higher boron carbide content may affect the concrete strength and other properties.

  18. Sulphur diffusion in β-NiAl and effect of Pt additive: an ab initio study

    NASA Astrophysics Data System (ADS)

    Chen, Kuiying

    2016-02-01

    Diffusivities of detrimental impurity sulfur (S) in stoichiometric and Pt doped β-NiAl were evaluated using density functional theory calculations. The apparent activation energy and the pre-exponential factor of diffusivity via the next nearest neighbour (NNN) and interstitial jumps were evaluated to identify possible preferred diffusion mechanism(s). By calculating the electron localization function (ELF), the bonding characteristics of S with its surrounding atoms were assessed for the diffusion process. By comparison with the experimental results, the S diffusion through the NNN vacancy-mediated mechanism is found to be favoured. Addition of Pt in β-NiAl was found to significantly reduce the S diffusivity, and an associated electronic effect was explored. The elucidation of the above mechanisms may shed light on the development of new Pt-modified doped β-NiAl bond coats that can extend the life of oxidation resistant and thermal barrier coatings.

  19. Preliminary study of neutron absorption by concrete with boron carbide addition

    SciTech Connect

    Abdullah, Yusof Yusof, Mohd Reusmaazran; Zali, Nurazila Mat; Ahmad, Megat Harun Al Rashid Megat; Yazid, Hafizal; Ariffin, Fatin Nabilah Tajul; Ahmad, Sahrim; Hamid, Roszilah; Mohamed, Abdul Aziz

    2014-02-12

    Concrete has become a conventional material in construction of nuclear reactor due to its properties like safety and low cost. Boron carbide was added as additives in the concrete construction as it has a good neutron absorption property. The sample preparation for concrete was produced with different weight percent of boron carbide powder content. The neutron absorption rate of these samples was determined by using a fast neutron source of Americium-241/Be (Am-Be 241) and detection with a portable backscattering neutron detector. Concrete with 20 wt % of boron carbide shows the lowest count of neutron transmitted and this indicates the most neutrons have been absorbed by the concrete. Higher boron carbide content may affect the concrete strength and other properties.

  20. THERMODYNAMIC STUDY OF THE NICKEL ADDITION IN ZINC HOT-DIP GALVANIZING BATHS

    SciTech Connect

    Pistofidis, N.; Vourlias, G.

    2010-01-21

    A usual practice during zinc hot-dip galvanizing is the addition of nickel in the liquid zinc which is used to inhibit the Sandelin effect. Its action is due to the fact that the zeta(zeta) phase of the Fe-Zn system is replaced by the TAU(tau) phase of the Fe-Zn-Ni system. In the present work an attempt is made to explain the formation of the TAU phase with thermodynamics. For this reason the Gibbs free energy changes for TAU and zeta phases were calculated. The excess free energy for the system was calculated with the Redlich-Kister polyonyme. From this calculation it was deduced that the Gibbs energy change for the tau phase is negative. As a result its formation is spontaneous.

  1. Physical, chemical, and biological data for detailed study of irrigation drainage in the Uncompahgre Project area and in the Grand Valley, west-central Colorado, 1991-92

    USGS Publications Warehouse

    Butler, D.L.; Wright, W.G.; Hahn, D.A.; Krueger, R.P.; Osmundson, B.C.

    1994-01-01

    Because of concerns about potential effects of irrigation drainage on fish and wildlife resources and on human health, the U.S. Department of the Interior initiated a program in 1985 to assess water-quality problems associated with Federal irrigation projects in the Western United States. Physical, chemical, and biological data were collected for a detailed study of irrigation drainage in the Uncompahgre Project area and in the Grand Valley, west-central Colorado, during 1991-92. This report lists onsite measurements and concen- trations of major constituents, trace elements, and stable isotopes for surface-water- and ground-water-sampling sites. Insecticide data collected in the Grand Valley are presented. Ranges of specific-conductance measurements and dissolved- oxygen concentrations for selected wells and a daily record of water-level altitude and specific conduc- tance for a well in the Grand Valley are presented. The report presents historical water-level and dissolved-solids data for two wells in the Grand Valley. Concentrations of trace elements, major constituents, total carbon, and organic carbon in bottom-sediment, bedrock, and in aquifer-sediment samples and semiquantitative data on clay and bulk mineralogy of samples of the Mancos Shale are presented. The report contains selenium-speciation data for selected water and bottom-sediment samples and selected aquifer-test results. Biological samples collected in the Uncompahgre Project area and in the Grand Valley included aquatic plants, aquatic invertebrates, fish, birds, and bird eggs. The report lists concentrations of trace elements in biological samples collected in 1991-92. A limited number of biological samples were analyzed for pesticides, PCB's, and polycyclic aromatic hydrocarbons.

  2. Detailed expression pattern of aldolase C (Aldoc) in the cerebellum, retina and other areas of the CNS studied in Aldoc-Venus knock-in mice.

    PubMed

    Fujita, Hirofumi; Aoki, Hanako; Ajioka, Itsuki; Yamazaki, Maya; Abe, Manabu; Oh-Nishi, Arata; Sakimura, Kenji; Sugihara, Izumi

    2014-01-01

    Aldolase C (Aldoc, also known as "zebrin II"), a brain type isozyme of a glycolysis enzyme, is expressed heterogeneously in subpopulations of cerebellar Purkinje cells (PCs) that are arranged longitudinally in a complex striped pattern in the cerebellar cortex, a pattern which is closely related to the topography of input and output axonal projections. Here, we generated knock-in Aldoc-Venus mice in which Aldoc expression is visualized by expression of a fluorescent protein, Venus. Since there was no obvious phenotypes in general brain morphology and in the striped pattern of the cerebellum in mutants, we made detailed observation of Aldoc expression pattern in the nervous system by using Venus expression in Aldoc-Venus heterozygotes. High levels of Venus expression were observed in cerebellar PCs, cartwheel cells in the dorsal cochlear nucleus, sensory epithelium of the inner ear and in all major types of retinal cells, while moderate levels of Venus expression were observed in astrocytes and satellite cells in the dorsal root ganglion. The striped arrangement of PCs that express Venus to different degrees was carefully traced with serial section alignment analysis and mapped on the unfolded scheme of the entire cerebellar cortex to re-identify all individual Aldoc stripes. A longitudinally striped boundary of Aldoc expression was first identified in the mouse flocculus, and was correlated with the climbing fiber projection pattern and expression of another compartmental marker molecule, heat shock protein 25 (HSP25). As in the rat, the cerebellar nuclei were divided into the rostrodorsal negative and the caudoventral positive portions by distinct projections of Aldoc-positive and negative PC axons in the mouse. Identification of the cerebellar Aldoc stripes in this study, as indicated in sample coronal and horizontal sections as well as in sample surface photos of whole-mount preparations, can be referred to in future experiments.

  3. Professional Competence Development of the Social Work Specialists in the Period of Study in the System of Additional Education

    ERIC Educational Resources Information Center

    Davletkaliev, Denis Kuanyshevich; Zueva, Natalia Konstantinovna; Lebedeva, Natalya Vasilevna; Mkrtumova, Irina Vladimirovna; Timofeeva, Olga

    2015-01-01

    The goal of this work is the study of psychological-pedagogical approaches to the understanding of the idea of professional competence of social work specialists as well as the role of study in the system of additional educations in professional-personal development of the listeners. In the process of study of this problem we define main…

  4. A systematic study of well-known electrolyte additives in LiCoO2/graphite pouch cells

    NASA Astrophysics Data System (ADS)

    Wang, David Yaohui; Sinha, N. N.; Petibon, R.; Burns, J. C.; Dahn, J. R.

    2014-04-01

    The effectiveness of well-known electrolyte additives singly or in combination on LiCoO2/graphite pouch cells has been systematically investigated and compared using the ultra high precision charger (UHPC) at Dalhousie University and electrochemical impedance spectroscopy (EIS). UHPC studies are believed to identify the best electrolyte additives singly or in combination within a short time period (several weeks). Three parameters: 1) the coulombic efficiency (CE); 2) the charge endpoint capacity slippage (slippage) and 3) the charge transfer resistance (Rct), of LiCoO2/graphite pouch cells with different electrolyte additives singly or in combination were measured and the results for over 55 additive sets are compared. The experimental results suggest that a combination of electrolyte additives can be more effective than a single electrolyte additive. However, of all the additive sets tested, simply using 2 wt.% vinylene carbonate yielded cells very competitive in CE, slippage and Rct. It is hoped that this comprehensive report can be used as a guide and reference for the study of other electrolyte additives singly or in combination.

  5. Clinical professional governance for detailed clinical models.

    PubMed

    Goossen, William; Goossen-Baremans, Anneke

    2013-01-01

    This chapter describes the need for Detailed Clinical Models for contemporary Electronic Health Systems, data exchange and data reuse. It starts with an explanation of the components related to Detailed Clinical Models with a brief summary of knowledge representation, including terminologies representing clinic relevant "things" in the real world, and information models that abstract these in order to let computers process data about these things. Next, Detailed Clinical Models are defined and their purpose is described. It builds on existing developments around the world and accumulates in current work to create a technical specification at the level of the International Standards Organization. The core components of properly expressed Detailed Clinical Models are illustrated, including clinical knowledge and context, data element specification, code bindings to terminologies and meta-information about authors, versioning among others. Detailed Clinical Models to date are heavily based on user requirements and specify the conceptual and logical levels of modelling. It is not precise enough for specific implementations, which requires an additional step. However, this allows Detailed Clinical Models to serve as specifications for many different kinds of implementations. Examples of Detailed Clinical Models are presented both in text and in Unified Modelling Language. Detailed Clinical Models can be positioned in health information architectures, where they serve at the most detailed granular level. The chapter ends with examples of projects that create and deploy Detailed Clinical Models. All have in common that they can often reuse materials from earlier projects, and that strict governance of these models is essential to use them safely in health care information and communication technology. Clinical validation is one point of such governance, and model testing another. The Plan Do Check Act cycle can be applied for governance of Detailed Clinical Models

  6. Spectroscopic Evidence for Covalent Binding of Sulfadiazine to Natural Soils via 1,4-nucleophilic addition (Michael Type Addition) studied by Spin Labeling ESR

    NASA Astrophysics Data System (ADS)

    Aleksandrova, Olga

    2015-04-01

    Among different classes of veterinary pharmaceuticals, Sulfadiazine (SDZ) is widely used in animal husbandry. Its residues were detected in different environmental compartments. However, soil is a hot spot for SDZ as it receives a large portion of excreted compounds through the application of manure during soil fertilization. Ample studies on the fate of SDZ in soils showed that a large portion forms nonextractable residues (NER) along with transformation products and a low mineralization (Mueller et al., 2013). A common observation was an initially fast formation of NER up to 10% of the applied amount promptly after the application of SDZ to soil, and this portion increased up to 50% within a few days (Mueller et al., 2013; Nowak et al., 2011). A common finding for SDZ, as for other sulfonamides, was biphasic kinetics of the formation of NER, which was attributed to the occurrence of two reaction processes: a rapid, often reversible process and a slower, irreversible process (Weber et al., 1996). A single-phase reaction process was also established under anaerobic treatment (Gulkowska et al., 2014). A major focus of this work is to elucidate a reaction mechanism of covalent binding of SDZ to soil that is currently required to estimate a risk of NER formed by SDZ in soils for human health. Taking into account a key role of the amine functional groups of SDZ on its reactivity in soil, nitroxide radicals with the sewed aromatic or aliphatic amines labeled soil samples and then, were investigated by means of ESR spectroscopy. 2,5,5-Trimethyl-2-(3-aminophenyl)pyrrolidin-1-yloxy and 4-amino-2,2,6,6-Tetramethylpiperidin-1-oxyl modeled decomposition products of SDZ with the aromatic and aliphatic amines, respectively. The application of the defined combination of both spin labels (SL) to different soils well simulated a change of a paramagnetic signal of soil organic radicals interacted with SDZ. After their application to soil, SL were found in soil sites characterized

  7. Spectroscopic Evidence for Covalent Binding of Sulfadiazine to Natural Soils via 1,4-nucleophilic addition (Michael Type Addition) studied by Spin Labeling ESR

    NASA Astrophysics Data System (ADS)

    Aleksandrova, Olga

    2015-04-01

    Among different classes of veterinary pharmaceuticals, Sulfadiazine (SDZ) is widely used in animal husbandry. Its residues were detected in different environmental compartments. However, soil is a hot spot for SDZ as it receives a large portion of excreted compounds through the application of manure during soil fertilization. Ample studies on the fate of SDZ in soils showed that a large portion forms nonextractable residues (NER) along with transformation products and a low mineralization (Mueller et al., 2013). A common observation was an initially fast formation of NER up to 10% of the applied amount promptly after the application of SDZ to soil, and this portion increased up to 50% within a few days (Mueller et al., 2013; Nowak et al., 2011). A common finding for SDZ, as for other sulfonamides, was biphasic kinetics of the formation of NER, which was attributed to the occurrence of two reaction processes: a rapid, often reversible process and a slower, irreversible process (Weber et al., 1996). A single-phase reaction process was also established under anaerobic treatment (Gulkowska et al., 2014). A major focus of this work is to elucidate a reaction mechanism of covalent binding of SDZ to soil that is currently required to estimate a risk of NER formed by SDZ in soils for human health. Taking into account a key role of the amine functional groups of SDZ on its reactivity in soil, nitroxide radicals with the sewed aromatic or aliphatic amines labeled soil samples and then, were investigated by means of ESR spectroscopy. 2,5,5-Trimethyl-2-(3-aminophenyl)pyrrolidin-1-yloxy and 4-amino-2,2,6,6-Tetramethylpiperidin-1-oxyl modeled decomposition products of SDZ with the aromatic and aliphatic amines, respectively. The application of the defined combination of both spin labels (SL) to different soils well simulated a change of a paramagnetic signal of soil organic radicals interacted with SDZ. After their application to soil, SL were found in soil sites characterized

  8. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy.

  9. Sensitization to Food Additives in Patients with Allergy: A Study Based on Skin Test and Open Oral Challenge.

    PubMed

    Moghtaderi, Mozhgan; Hejrati, Zinatosadat; Dehghani, Zahra; Dehghani, Faranak; Kolahi, Niloofar

    2016-06-01

    There has been a great increase in the consumption of various food additives in recent years. The purpose of this study was to identify the incidence of sensitization to food additives by using skin prick test in patients with allergy and to determine the concordance rate between positive skin tests and oral challenge in hypersensitivity to additives. This cross-sectional study included 125 (female 71, male 54) patients aged 2-76 years with allergy and 100 healthy individuals. Skin tests were performed in both patient and control groups with 25 fresh food additives. Among patients with allergy, 22.4% showed positive skin test at least to one of the applied materials. Skin test was negative to all tested food additives in control group. Oral food challenge was done in 28 patients with positive skin test, in whom 9 patients showed reaction to culprit (Concordance rate=32.1%). The present study suggested that about one-third of allergic patients with positive reaction to food additives showed positive oral challenge; it may be considered the potential utility of skin test to identify the role of food additives in patients with allergy. PMID:27424134

  10. Te Rita Papesch: Case Study of an Exemplary Learner of Maori as an Additional Language

    ERIC Educational Resources Information Center

    Ratima, Matiu Tai; Papesch, Te Rita

    2014-01-01

    This paper presents a case study of the life experiences of one exemplar adult second language Maori learner--Te Rita Papesch. Te Rita was one of 17 participants who were interviewed as a part of the first author's PhD study which sought to answer the question: what factors lead to the development of proficiency in te reo Maori amongst adult…

  11. Study on additional carrier sensing for IEEE 802.15.4 wireless sensor networks.

    PubMed

    Lee, Bih-Hwang; Lai, Ruei-Lung; Wu, Huai-Kuei; Wong, Chi-Ming

    2010-01-01

    Wireless sensor networks based on the IEEE 802.15.4 standard are able to achieve low-power transmissions in the guise of low-rate and short-distance wireless personal area networks (WPANs). The slotted carrier sense multiple access with collision avoidance (CSMA/CA) is used for contention mechanism. Sensor nodes perform a backoff process as soon as the clear channel assessment (CCA) detects a busy channel. In doing so they may neglect the implicit information of the failed CCA detection and further cause the redundant sensing. The blind backoff process in the slotted CSMA/CA will cause lower channel utilization. This paper proposes an additional carrier sensing (ACS) algorithm based on IEEE 802.15.4 to enhance the carrier sensing mechanism for the original slotted CSMA/CA. An analytical Markov chain model is developed to evaluate the performance of the ACS algorithm. Both analytical and simulation results show that the proposed algorithm performs better than IEEE 802.15.4, which in turn significantly improves throughput, average medium access control (MAC) delay and power consumption of CCA detection.

  12. Chromosome studies in the aquatic monocots of Myanmar: A brief review with additional records.

    PubMed

    Ito, Yu; Tanaka, Nobuyuki

    2014-01-01

    Myanmar (Burma) constitutes a significant component of the Indo-Myanmar biodiversity hotspot, with elements of the Indian, the Indochina, and the Sino-Japanese floristic regions, yet thus far only a few reliable sources of the country's flora have been available. As a part of a contribution for the floristic inventory of Myanmar, since it is important in a floristic survey to obtain as much information as possible, in addition to previous two reports, here we present three more chromosome counts in the aquatic monocots of Myanmar: Limnocharisflava with 2n = 20, Sagittariatrifolia with 2n = 22 (Alismataceae), and Potamogetondistinctus × Potamogetonnodosus with 2n = 52 (Potamogetonaceae); the third one is new to science. A brief review of cytological researches in the floristic regions' 45 non-hybrid aquatic monocots plus well investigated two inter-specific hybrids that are recorded in Myanmar is given, indicating that the further works with a focus on species in Myanmar that has infra-specific chromosome variation in the floristic regions will address the precise evolutionary history of the aquatic flora of Myanmar.

  13. Generalized linear and generalized additive models in studies of species distributions: Setting the scene

    USGS Publications Warehouse

    Guisan, A.; Edwards, T.C.; Hastie, T.

    2002-01-01

    An important statistical development of the last 30 years has been the advance in regression analysis provided by generalized linear models (GLMs) and generalized additive models (GAMs). Here we introduce a series of papers prepared within the framework of an international workshop entitled: Advances in GLMs/GAMs modeling: from species distribution to environmental management, held in Riederalp, Switzerland, 6-11 August 2001. We first discuss some general uses of statistical models in ecology, as well as provide a short review of several key examples of the use of GLMs and GAMs in ecological modeling efforts. We next present an overview of GLMs and GAMs, and discuss some of their related statistics used for predictor selection, model diagnostics, and evaluation. Included is a discussion of several new approaches applicable to GLMs and GAMs, such as ridge regression, an alternative to stepwise selection of predictors, and methods for the identification of interactions by a combined use of regression trees and several other approaches. We close with an overview of the papers and how we feel they advance our understanding of their application to ecological modeling. ?? 2002 Elsevier Science B.V. All rights reserved.

  14. Exploratory studies of extended storage of apheresis platelets in a platelet additive solution (PAS).

    PubMed

    Slichter, Sherrill J; Corson, Jill; Jones, Mary Kay; Christoffel, Todd; Pellham, Esther; Bailey, S Lawrence; Bolgiano, Doug

    2014-01-01

    To evaluate the poststorage viability of apheresis platelets stored for up to 18 days in 80% platelet additive solution (PAS)/20% plasma, 117 healthy subjects donated platelets using the Haemonetics MCS+, COBE Spectra (Spectra), or Trima Accel (Trima) systems. Control platelets from the same subjects were compared with their stored test PAS platelets by radiolabeling their stored and control platelets with either (51)chromium or (111)indium. Trima platelets met Food and Drug Administration poststorage platelet viability criteria for only 7 days vs almost 13 days for Haemonetics platelets; ie, platelet recoveries after these storage times averaged 44 ± 3% vs 49 ± 3% and survivals were 5.4 ± 0.3 vs 4.6 ± 0.3 days, respectively. The differences in storage duration are likely related to both the collection system and the storage bag. The Spectra and Trima platelets were hyperconcentrated during collection, and PAS was added, whereas the Haemonetics platelets were elutriated with PAS, which may have resulted in less collection injury. When Spectra and Trima platelets were stored in Haemonetics' bags, poststorage viability was significantly improved. Platelet viability is better maintained in vitro than in vivo, allowing substantial increases in platelet storage times. However, implementation will require resolution of potential bacterial overgrowth during storage.

  15. Chromosome studies in the aquatic monocots of Myanmar: A brief review with additional records

    PubMed Central

    2014-01-01

    Abstract Myanmar (Burma) constitutes a significant component of the Indo-Myanmar biodiversity hotspot, with elements of the Indian, the Indochina, and the Sino-Japanese floristic regions, yet thus far only a few reliable sources of the country's flora have been available. As a part of a contribution for the floristic inventory of Myanmar, since it is important in a floristic survey to obtain as much information as possible, in addition to previous two reports, here we present three more chromosome counts in the aquatic monocots of Myanmar: Limnocharis flava with 2n = 20, Sagittaria trifolia with 2n = 22 (Alismataceae), and Potamogeton distinctus × Potamogeton nodosus with 2n = 52 (Potamogetonaceae); the third one is new to science. A brief review of cytological researches in the floristic regions' 45 non-hybrid aquatic monocots plus well investigated two inter-specific hybrids that are recorded in Myanmar is given, indicating that the further works with a focus on species in Myanmar that has infra-specific chromosome variation in the floristic regions will address the precise evolutionary history of the aquatic flora of Myanmar. PMID:24891826

  16. Multi-spectroscopic DNA interaction studies of sunset yellow food additive.

    PubMed

    Kashanian, Soheila; Heidary Zeidali, Sahar; Omidfar, Kobra; Shahabadi, Nahid

    2012-12-01

    The use of food dyes is at least controversial due to their essential role. Synthetic color food additives occupy an important place in the food industry. Moreover many of them have been related to health problems mainly in children that are considered the most vulnerable group. The purpose of this work is to present spectrophotometric methods to analyze the interaction of native calf thymus DNA (CT-DNA) with sunset yellow (SY) at physiological pH. Considerable hyperchromism and no red shift with an intrinsic binding constant of 7 × 10(4 )M(-1) were observed in UV absorption band of SY. Binding constants of DNA with complex were calculated at different temperatures. Slow increase in specific viscosity of DNA, induced circular dichroism spectral changes, and no significant changes in the fluorescence of neutral red-DNA solutions in the presence of SY suggest that this molecule interacts with CT-DNA via groove binding mode. Furthermore, the enthalpy and entropy of the reaction between SY and CT-DNA showed that the reaction is exothermic and enthalpy favored (∆H = -58.19 kJ mol(-1); ΔS = -274.36 kJ mol(-1) ) which are other evidences to indicate that van der Waals interactions and hydrogen bonding are the main running forces in the binding of the mentioned molecule and mode of interaction with DNA.

  17. A study of alternative metal particle structures and mixtures for dental amalgams based on mercury additions.

    PubMed

    Marquez, J A; Murr, L E; Agüero, V

    2000-08-01

    The perception that mercury in dental amalgam is toxic to the human organism has prompted worldwide efforts by the scientific community to develop alternative amalgam-like materials that utilize little or no mercury. In this investigation, an attempt is made to develop a new dental alloy system by adding liquid mercury to silver-coated Ag4Sn intermetallic particles in lesser amounts than are used in conventional amalgam alloys. An effort to precipitate the important eta-prime (Cu6Sn5) phase was made by adding pure Cu and Sn powders to the alloy formulation during trituration. Tytin a popular Ag-Sn-Cu single-composition, spray-atomized conventional dental alloy was used as the control to obtain baseline data for comparisons of microstructures and mechanical properties. Amalgamation of the coated particles with mercury, with or without the addition of Cu and Sn powders, mostly produced specimens with chemically non-coherent microstructures that were relatively weak in compression. These results were due, in part, to mercury's inability to chemically wet the Ag-coated particles and Cu and Sn powders because of naturally occurring surface oxide films. The strongest specimens tested had silver dendritic coatings, resulting in compression strength values up to 40% of the control's. Their higher strength is attributed to mechanical interlocking at the particle/matrix interfaces.

  18. Additional road markings as an indication of speed limits: results of a field experiment and a driving simulator study.

    PubMed

    Daniels, Stijn; Vanrie, Jan; Dreesen, An; Brijs, Tom

    2010-05-01

    Although speed limits are indicated by road signs, road users are not always aware, while driving, of the actual speed limit on a given road segment. The Roads and Traffic Agency developed additional road markings in order to support driver decisions on speed on 70 km/h roads in Flanders-Belgium. In this paper the results are presented of two evaluation studies, both a field study and a simulator study, on the effects of the additional road markings on speed behaviour. The results of the field study showed no substantial effect of the markings on speed behaviour. Neither did the simulator study, with slightly different stimuli. Nevertheless an effect on lateral position was noticed in the simulator study, showing at least some effect of the markings. The role of conspicuity of design elements and expectations towards traffic environments is discussed. Both studies illustrate well some strengths and weaknesses of observational field studies compared to experimental simulator studies.

  19. Voice measures of workload in the advanced flight deck: Additional studies

    NASA Technical Reports Server (NTRS)

    Schneider, Sid J.; Alpert, Murray

    1989-01-01

    These studies investigated acoustical analysis of the voice as a measure of workload in individual operators. In the first study, voice samples were recorded from a single operator during high, medium, and low workload conditions. Mean amplitude, frequency, syllable duration, and emphasis all tended to increase as workload increased. In the second study, NASA test pilots performed a laboratory task, and used a flight simulator under differing work conditions. For two of the pilots, high workload in the simulator brought about greater amplitude, peak duration, and stress. In both the laboratory and simulator tasks, high workload tended to be associated with more statistically significant drop-offs in the acoustical measures than were lower workload levels. There was a great deal of intra-subject variability in the acoustical measures. The results suggested that in individual operators, increased workload might be revealed by high initial amplitude and frequency, followed by rapid drop-offs over time.

  20. Study on Type C Coal Fly ash as an Additive to Molding Sand for Steel Casting

    NASA Astrophysics Data System (ADS)

    Palaniappan, Jayanthi

    2016-05-01

    Study of physio-chemical properties studies such as granulometric analysis, moisture, X ray fluorescence etc. were performed with Type C coal—combustion fly ash to investigate their potential as a distinct option for molding sand in foundry, thereby reducing the dependency on latter. Technological properties study such as compressive strength, tensile strength, permeability and compaction of various compositions of fly ash molding sand (10, 20 and 30 % fly ash substitute to chemically bonded sand) were performed and compared with silica molding sand. Steel casting production using this fly ash molding sand was done and the casting surface finish and typical casting parameters were assessed. It was noted that a good quality steel casting could be produced using type C fly ash molding sand, which effectively replaced 20 % of traditional molding sand and binders thereby providing greater financial profits to the foundry and an effective way of fly ash utilization (waste management).

  1. Additional Study of Water Droplet Median Volume Diameter (MVD) Effects on Ice Shapes

    NASA Technical Reports Server (NTRS)

    Tsao, Jen-Ching; Anderson, David N.

    2005-01-01

    This paper reports the result of an experimental study in the NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the MVD-independent effect identified previously might apply to SLD conditions in rime icing situations. Models were NACA 0012 wing sections with chords of 53.3 and 91.4 cm. Tests were conducted with a nominal airspeed of 77 m/s (150 kt) and a number of MVD's ranging from 15 to 100 m with LWC of 0.5 to 1 g/cu m. In the present study, ice shapes recorded from past studies and recent results at SLD and Appendix-C conditions are reviewed to show that droplet diameter is not important to rime ice shape for MVD of 30 microns or larger, but for less than 30 m drop sizes a rime ice shape transition from convex to wedge to spearhead type ice shape is observed.

  2. A study of grain boundary sliding in copper with and without an addition of phosphorus

    NASA Astrophysics Data System (ADS)

    Pettersson, Kjell

    2010-10-01

    Copper will be used as a corrosion barrier in the storage of high level nuclear waste. In order to improve the creep fracture properties of the material it will contain 30-50 ppm of phosphorus, OFP copper as opposed to OF copper without P. It has been suggested that the phosphorus impedes grain boundary sliding in copper and recently a quantitative theory based on this idea has shown that there is no risk for creep-brittle fracture of OFP copper under waste storage conditions. In order to verify the basis of this theory grain boundary sliding has been investigated in copper with and without a P addition. The method has been to examine intentionally scratched surfaces of tensile specimens tension tested to plastic strains of 1%, 2% and 4% at 150 and 200 °C. After testing specimen surfaces have been examined in SEM and sliding distances have been measured as in-surface displacement of scratches. The results have been plotted as distribution functions where the fraction of slides smaller than a given value is plotted versus sliding distance. The result is that in most cases the distribution functions for OF and OFP copper overlap. In a small number of cases there is a tendency that less sliding has occurred in OFP copper. The overall conclusion is however that although there may be a slight difference between the materials with regard to grain boundary sliding it is not large enough to explain the observed difference in creep brittleness. Tension tests to fracture in the temperature range 100-200 °C show that the tensile properties of the two copper qualities are more or less identical until intergranular cracking starts in the OF copper. Then the flow stress decreases in comparison with OFP. It is suggested that at least part of the observed differences in creep strength between the two coppers may be due to the effect of intergranular cracking.

  3. SCAPEGOAT WILDERNESS AND ADDITIONS, BOB MARSHALL AND GREAT BEAR WILDERNESSES, AND ADJACENT STUDY AREAS, MONTANA.

    USGS Publications Warehouse

    Earhart, Robert L.; Marks, Lawrence Y.

    1984-01-01

    Hydrocarbon and non-fuels mineral surveys indicate that parts of the Bob Marshall and Great Bear Wildernesses and several of the adjacent study areas have probable and substantiated mineral-resource potential for hydrocarbon accumulations, especially natural gas; the Scapegoat and Great Bear Wildernesses have a substantiated resource potential for copper and silver. The Bob Marshall Wilderness has a substantiated potential for barite and a probable potential for copper and silver. Lead, zinc, coal, and limestone occur locally within the study areas but such occurrences are small and low grade and no resource potential is identified.

  4. Nahuatl as a Classical, Foreign, and Additional Language: A Phenomenological Study

    ERIC Educational Resources Information Center

    De Felice, Dustin

    2012-01-01

    In this study, participants learning an endangered language variety shared their experiences, thoughts, and feelings about the often complex and diverse language-learning process. I used phenomenological interviews in order to learn more about these English or Spanish language speakers' journey with the Nahuatl language. From first encounter to…

  5. CNV-based genome wide association study reveals additional variants contributing to meat quality in swine

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Pork quality is important both to the meat processing industry and consumers’ purchasing attitudes. Copy number variation (CNV) is a burgeoning kind of variant that may influence meat quality. Herein, a genome-wide association study (GWAS) was performed between CNVs and meat quality traits in swine....

  6. Genome-Wide Association Study of Intelligence: Additive Effects of Novel Brain Expressed Genes

    ERIC Educational Resources Information Center

    Loo, Sandra K.; Shtir, Corina; Doyle, Alysa E.; Mick, Eric; McGough, James J.; McCracken, James; Biederman, Joseph; Smalley, Susan L.; Cantor, Rita M.; Faraone, Stephen V.; Nelson, Stanley F.

    2012-01-01

    Objective: The purpose of the present study was to identify common genetic variants that are associated with human intelligence or general cognitive ability. Method: We performed a genome-wide association analysis with a dense set of 1 million single-nucleotide polymorphisms (SNPs) and quantitative intelligence scores within an ancestrally…

  7. A Micro-Developmental Approach to Studying Young Children's Problem Solving Behavior in Addition

    ERIC Educational Resources Information Center

    Voutsina, Chronoula

    2012-01-01

    This paper presents a study that investigated the process of change in 5-6-year-old children's successful problem-solving approaches when tackling a multiple-step task in elementary arithmetic. Micro-developmental changes in children's successful problem-solving behavior were analyzed using Karmiloff-Smith's model of representational redescription…

  8. Detailed polymorphism study on cytomegalovirus DNA polymerase gene to reveal the most suitable genomic targets for quantitative Real-time PCR.

    PubMed

    Bilenoğlu, Onur; Altındiş, Mustafa; Öz, Ersoy; Yücel-Öz, Yeliz; İrigül-Sönmez, Öykü; Ünal, Can Bora

    2015-01-01

    The human cytomegalovirus (HCMV) is an important human pathogen primarily affecting immunocompromised patients, like transplant recipients or HIV- infected individuals. Early diagnosis of cytomegalovirus (CMV) infection in high-risk patients is essential in order to start preemptive treatments. pol (UL54) gene encoding for HCMV viral DNA polymerase is a well-defined target for HCMV detection in clinical samples and identifying most highly conserved regions for primer design remains crucial. Though real-time polymerase chain reaction (qPCR) is a rapid and sensitive method for HCMV detection, failure to detect some HCMV strains due to primer and target mismatches have led the researchers to explore more sensitive and reliable methods. Hence, to understand the broader diversity of the pol mutations in HCMV and to specify the most suitable region for primer-probe design to be used in qPCR assay, we studied both nucleotide and amino acid heterogeneities in 60 HCMV positive samples that were collected to represent national mutational prevalence of pol gene of HCMV in Turkey. The test was designed with a new set of primers- probe for HCMV detection and quantification based on the sequencing data which revealed the most conserved region on the pol gene. Statistical probit analysis was applied on qPCR studies which revealed a 95% detection limit of 100 copies/mL. In addition, linearity, reproducibility, and precision of the new test were assessed for diagnostic purposes. PMID:26295291

  9. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  10. Anti cancer activity on Graviola, an exciting medicinal plant extract vs various cancer cell lines and a detailed computational study on its potent anti-cancerous leads.

    PubMed

    Paul, Jeno; Gnanam, R; Jayadeepa, R M; Arul, L

    2013-01-01

    Nature is the world's best chemist: Many naturally occurring compounds have very complicated structures that present great challenges to chemists wishing to determine their structures or replicate them. The plant derived herbal compounds have a long history of clinical use, better patient tolerance and acceptance. Their high ligand binding affinity to the target introduce the prospect of their use in chemo preventive applications; in addition they are freely available natural compounds that can be safely used to prevent various ailments. Plants became the basis of traditional medicine system throughout the world for thousands of years and continue to provide mankind with new remedies. Here, we present a research study on a medicinal plant, Graviola, a native of North America but rarely grown in India. It has a wide potent anticancerous agents coined as Acetogenins which play a key role towards many varieties of cancer, Acetogenins are potent inhibitors of NADH oxidase of the plasma membranes of cancer cells. Potent leads were taken for the study through literature survey, major types of cancer targets were identified, the natureceuticals and the cancer protein were subjected to docking analysis, further with the help of the dock score and other descriptor properties top ranked molecules were collected, commercial drug was also selected and identified as a Test compound for the study. Later, the phytochemicals were subjected to toxicity analysis. Those screened compounds were then considered for active site analysis and to find the best binding site for the study. R Programming library was used to find the best leads. Phytochemicals such as Anonaine, Friedelin, Isolaureline, Annonamine, Anomurine, Kaempferol, Asimilobine, Quercetin, Xylopine were clustered and the highly clustered compounds such as Annonamine , Kaempferol termed to be a potential lead for the study. Further study on experimental analysis may prove the potentiality of these compounds. In the

  11. Comparative study of glycine single crystals with additive of potassium nitrate in different concentration ratios

    NASA Astrophysics Data System (ADS)

    Gujarati, Vivek P.; Deshpande, M. P.; Patel, Kamakshi R.; Chaki, S. H.

    2016-05-01

    Semi-organic crystals of Glycine Potassium Nitrate (GPN) with potential applications in Non linear optics (NLO) were grown using slow evaporation technique. Glycine and Potassium Nitrate were taken in three different concentration ratios of 3:1, 2:1 and 1:1 respectively. We checked the solubility of the material in distilled water at different temperatures and could observe the growth of crystals in 7 weeks time. Purity of the grown crystals was confirmed by Energy Dispersive X-ray Analysis (EDAX) and CHN analysis. GSN Powder X-ray diffraction pattern was recorded to confirm the crystalline nature. To confirm the applications of grown crystals in opto-electronics field, UV-Vis-NIR study was carried out. Dielectric properties of the samples were studied in between the frequency range 1Hz to 100 KHz.

  12. Brief reconnaissance study for the addition of hydropower for Carr Fork Dam, Sassafras, Kentucky

    SciTech Connect

    Gebhard, T.G. Jr.

    1982-05-24

    The feasibility of retrofitting the Carr Fork Dam near Hazard, KY for power generation was examined. This dam has a developable head of 80 ft and was built in 1975 to provide flood protection. The study of environmental, institutional, safety, and economic factors showed that the total investment cost would be $909,600 and that hydroelectric power development at this site is not feasible unless a higher price could be obtained for the power sold. (LCL)

  13. Expanding access to primary care without additional budgets? A case study from Burkina Faso.

    PubMed

    Marschall, Paul; Flessa, Steffen

    2008-11-01

    The aim of this study is to demonstrate the impact of increased access to primary care on provider costs in the rural health district of Nouna, Burkina Faso. This study question is crucial for health care planning in this district, as other research work shows that the population has a higher need for health care services. From a public health perspective, an increase of utilisation of first-line health facilities would be necessary. However, the governmental budget that is needed to finance improved access was not known. The study is based on data of 2004 of a comprehensive provider cost information system. This database provides us with the actual costs of each primary health care facility (Centre de Santé et de Promotion Sociale, CSPS) in the health district. We determine the fixed and variable costs of each institution and calculate the average cost per service unit rendered in 2004. Based on the cost structure of each CSPS, we calculate the total costs if the demand for health care services increased. We conclude that the total provider costs of primary care (and therefore the governmental budget) would hardly rise if the coverage of the population were increased. This is mainly due to the fact that the highest variable costs are drugs, which are fully paid for by the customers (Bamako Initiative). The majority of other costs are fixed. Consequently, health care reforms that improve access to health care institutions must not fear dramatically increasing the costs of health care services. PMID:18197447

  14. Detailed chemical kinetic modeling of diesel combustion with oxygenated fuels

    SciTech Connect

    Pitz, W J; Curran, H J; Fisher, E; Glaude, P A; Marinov, N M; Westbrook, C K

    1999-10-28

    The influence of oxygenated hydrocarbons as additives to diesel fuels on ignition, NOx emissions and soot production has been examined using a detailed chemical kinetic reaction mechanism. N-heptane was used as a representative diesel fuel, and methanol, ethanol, dimethyl ether and dimethoxymethane were used as oxygenated fuel additives. It was found that addition of oxygenated hydrocarbons reduced NOx levels and reduced the production of soot precursors. When the overall oxygen content in the fuel reached approximately 25% by mass, production of soot precursors fell effectively to zero, in agreement with experimental studies. The kinetic factors responsible for these observations are discussed.

  15. Risk assessment based on a combination of historical analysis, a detailed field study and numerical modeling on the alluvial fan Gadeinerbach as a basis for a risk management concept

    NASA Astrophysics Data System (ADS)

    Moser, M.

    2009-04-01

    The catchment Gadeinerbach in the District of Lungau/Salzburg/Austria is prone to debris flows. Large debris flow events dates back from the years 1934 and 1953. In the upper catchment large mass movements represent debris sources. A field study shows the debris potential and the catchment looks like a "sleeping torrential giant". To carry out mitigation measures a detailed risk management concept, based on a risk assessment in combination of historical analysis, field study and numerical modeling on the alluvial fan was conducted. Human activities have partly altered the surface of the alluvial fan Gadeinerbach but nevertheless some important hazard indicators could be found. With the hazard indicators and photo analysis from the large debris flow event 1934 the catchment character could be pointed out. With the help of these historical data sets (hazard indicators, sediment and debris amount...) it is possible to calibrate the provided numerical models and to win useful knowledge over the pro and cons and their application. The results were used to simulate the design event and furthermore to derive mitigation measures. Therefore the most effective protection against debris with a reduction of the high energy level to a lower level under particular energy change in combination with a debris/bedload deposition place has been carried out. Expert opinion, the study of historical data and a field work is in addition to numerical simulation techniques very necessary for the work in the field of natural hazard management.

  16. [Chewing gum as an additional agent in maintaining oral hygiene versus smoking status--preliminary study].

    PubMed

    Nakonieczna-Rudnicka, Marta; Strycharz-Dudziak, Małgorzata; Bachanek, Teresa

    2012-01-01

    Nowadays chewing gum is widely used in different age groups, so complying with proper duration and frequency of chewing is an important factor influencing the state of masticatory system. The study involved 112 dental students of the Medical University of Lublin. Everyday use of chewing gum declared 47,32% of cases. Chewing time up to 10 minutes was stated in 23,08% of respondents, 11-20 minutes in 40,38% of interviewees. Among the examined students 17,3% smoked cigarettes. In smokers group 83,33% of questioned chewed the gum every day, while among non-smokers - 43,37%. Chewing time shorter than 10 minutes declared 22,22% of smokers and 23,26% of non-smokers, while chewing time between 11-20 minutes - 27,78% i 44,35% of smokers and non-smokers respectively. Obtained results indicate the need of carrying out further studies aimed at the nicotine influence on saliva parameters with respect to development of diseases of hard tooth tissues.

  17. Study on the interaction of the toxic food additive carmoisine with serum albumins: a microcalorimetric investigation.

    PubMed

    Basu, Anirban; Kumar, Gopinatha Suresh

    2014-05-30

    The interaction of the synthetic azo dye and food colorant carmoisine with human and bovine serum albumins was studied by microcalorimetric techniques. A complete thermodynamic profile of the interaction was obtained from isothermal titration calorimetry studies. The equilibrium constant of the complexation process was of the order of 10(6)M(-1) and the binding stoichiometry was found to be 1:1 with both the serum albumins. The binding was driven by negative standard molar enthalpy and positive standard molar entropy contributions. The binding affinity was lower at higher salt concentrations in both cases but the same was dominated by mostly non-electrostatic forces at all salt concentrations. The polyelectrolytic forces contributed only 5-8% of the total standard molar Gibbs energy change. The standard molar enthalpy change enhanced whereas the standard molar entropic contribution decreased with rise in temperature but they compensated each other to keep the standard molar Gibbs energy change almost invariant. The negative standard molar heat capacity values suggested the involvement of a significant hydrophobic contribution in the complexation process. Besides, enthalpy-entropy compensation phenomenon was also observed in both the systems. The thermal stability of the serum proteins was found to be remarkably enhanced on binding to carmoisine. PMID:24742664

  18. Study on the interaction of the toxic food additive carmoisine with serum albumins: a microcalorimetric investigation.

    PubMed

    Basu, Anirban; Kumar, Gopinatha Suresh

    2014-05-30

    The interaction of the synthetic azo dye and food colorant carmoisine with human and bovine serum albumins was studied by microcalorimetric techniques. A complete thermodynamic profile of the interaction was obtained from isothermal titration calorimetry studies. The equilibrium constant of the complexation process was of the order of 10(6)M(-1) and the binding stoichiometry was found to be 1:1 with both the serum albumins. The binding was driven by negative standard molar enthalpy and positive standard molar entropy contributions. The binding affinity was lower at higher salt concentrations in both cases but the same was dominated by mostly non-electrostatic forces at all salt concentrations. The polyelectrolytic forces contributed only 5-8% of the total standard molar Gibbs energy change. The standard molar enthalpy change enhanced whereas the standard molar entropic contribution decreased with rise in temperature but they compensated each other to keep the standard molar Gibbs energy change almost invariant. The negative standard molar heat capacity values suggested the involvement of a significant hydrophobic contribution in the complexation process. Besides, enthalpy-entropy compensation phenomenon was also observed in both the systems. The thermal stability of the serum proteins was found to be remarkably enhanced on binding to carmoisine.

  19. Shelf Life and Quality Study of Minced Tilapia with Nori and Hijiki Seaweeds as Natural Additives

    PubMed Central

    Ribeiro, Ingridy Simone; Shirahigue, Ligianne Din; Ferraz de Arruda Sucasas, Lia; Anbe, Lika; da Cruz, Pedro Gomes; Gallo, Cláudio Rosa; Carpes, Solange Teresinha; Marques, Marcos José; Oetterer, Marília

    2014-01-01

    The extraction of mechanically separated meat has emerged as an attractive process. However, it increases the incorporation of oxygen and, consequently, of flavors due to rancidity. Thus, preservatives must be added. The objective of this study was to evaluate the shelf life of minced tilapia to replace synthetic preservatives with Hijiki and Nori seaweeds extracts. The application of the extracts had no effect on the chemical composition of the minced tilapia. The seaweed extracts had inhibitory effect on total volatile base nitrogen. The minced tilapia complied with the microbiological standard set by Brazilin law. The panelists detected no differences in the rancid aroma and only minor differences were detected in the color of the products. It can be concluded that the minced tilapia with added seaweed extracts were within quality standards during frozen storage. PMID:25478593

  20. Mechanistic study of secondary organic aerosol components formed from nucleophilic addition reactions of methacrylic acid epoxide

    NASA Astrophysics Data System (ADS)

    Birdsall, A. W.; Miner, C. R.; Mael, L. E.; Elrod, M. J.

    2014-08-01

    Recently, methacrylic acid epoxide (MAE) has been proposed as a precursor to an important class of isoprene-derived compounds found in secondary organic aerosol (SOA): 2-methylglyceric acid (2-MG) and a set of oligomers, nitric acid esters and sulfuric acid esters related to 2-MG. However, the specific chemical mechanisms by which MAE could form these compounds have not been previously studied. In order to determine the relevance of these processes to atmospheric aerosol, MAE and 2-MG have been synthesized and a series of bulk solution-phase experiments aimed at studying the reactivity of MAE using nuclear magnetic resonance (NMR) spectroscopy have been performed. The present results indicate that the acid-catalyzed MAE reaction is more than 600 times slower than a similar reaction of an important isoprene-derived epoxide, but is still expected to be kinetically feasible in the atmosphere on more acidic SOA. The specific mechanism by which MAE leads to oligomers was identified, and the reactions of MAE with a number of atmospherically relevant nucleophiles were also investigated. Because the nucleophilic strengths of water, sulfate, alcohols (including 2-MG), and acids (including MAE and 2-MG) in their reactions with MAE were found to be of a similar magnitude, it is expected that a diverse variety of MAE + nucleophile product species may be formed on ambient SOA. Thus, the results indicate that epoxide chain reaction oligomerization will be limited by the presence of high concentrations of non-epoxide nucleophiles (such as water); this finding is consistent with previous environmental chamber investigations of the relative humidity-dependence of 2-MG-derived oligomerization processes and suggests that extensive oligomerization may not be likely on ambient SOA because of other competitive MAE reaction mechanisms.

  1. Mechanistic study of secondary organic aerosol components formed from nucleophilic addition reactions of methacrylic acid epoxide

    NASA Astrophysics Data System (ADS)

    Birdsall, A. W.; Miner, C. R.; Mael, L. E.; Elrod, M. J.

    2014-12-01

    Recently, methacrylic acid epoxide (MAE) has been proposed as a precursor to an important class of isoprene-derived compounds found in secondary organic aerosol (SOA): 2-methylglyceric acid (2-MG) and a set of oligomers, nitric acid esters, and sulfuric acid esters related to 2-MG. However, the specific chemical mechanisms by which MAE could form these compounds have not been previously studied with experimental methods. In order to determine the relevance of these processes to atmospheric aerosol, MAE and 2-MG have been synthesized and a series of bulk solution-phase experiments aimed at studying the reactivity of MAE using nuclear magnetic resonance (NMR) spectroscopy have been performed. The present results indicate that the acid-catalyzed MAE reaction is more than 600 times slower than a similar reaction of an important isoprene-derived epoxide, but is still expected to be kinetically feasible in the atmosphere on more acidic SOA. The specific mechanism by which MAE leads to oligomers was identified, and the reactions of MAE with a number of atmospherically relevant nucleophiles were also investigated. Because the nucleophilic strengths of water, sulfate, alcohols (including 2-MG), and acids (including MAE and 2-MG) in their reactions with MAE were found to be of similar magnitudes, it is expected that a diverse variety of MAE + nucleophile product species may be formed on ambient SOA. Thus, the results indicate that epoxide chain reaction oligomerization will be limited by the presence of high concentrations of non-epoxide nucleophiles (such as water); this finding is consistent with previous environmental chamber investigations of the relative humidity dependence of 2-MG-derived oligomerization processes and suggests that extensive oligomerization may not be likely on ambient SOA because of other competitive MAE reaction mechanisms.

  2. l-carnitine as a Potential Additive in Blood Storage Solutions: A Study on Erythrocytes.

    PubMed

    Soumya, R; Carl, H; Vani, R

    2016-09-01

    Erythrocytes undergo various changes during storage (storage lesion) that in turn reduces their functioning and survival. Oxidative stress plays a major role in the storage lesion and antioxidants can be used to combat this stress. This study elucidates the effects of l-carnitine (LC) on erythrocytes of stored blood. Blood was obtained from male Wistar rats and stored (4 °C) for 20 days in CPDA-1 (citrate phosphate dextrose adenine) solution. Samples were divided into-(i) controls (ii) LC 10 (l-carnitine at a concentration of 10 mM) (iii) LC 30 (l-carnitine at a concentration of 30 mM) and (iv) LC 60 (l-carnitine at a concentration of 60 mM). Every fifth day, the biomarkers (haemoglobin, hemolysis, antioxidant enzymes, lipid peroxidation and protein oxidation products) were analysed in erythrocytes. Hemoglobin and protein sulfhydryls were insignificant during storage indicative of the maintenance of hemoglobin and sulfhydryls in all groups. Superoxide dismutase and malondialdehyde levels increased initially and decreased towards the end of storage. The levels of catalase and glutathione peroxidase were lower in experimentals than controls during storage. l-carnitine assisted the enzymes by scavenging the reactive oxygen species produced. Hemolysis increased in all groups with storage, elucidating that l-carnitine could not completely protect lipids and proteins from oxidative stress. Hence, this study opens up new avenues of using l-carnitine as a component of storage solutions with combinations of antioxidants in order to maintain efficacy of erythrocytes.

  3. Biological effect of food additive titanium dioxide nanoparticles on intestine: an in vitro study.

    PubMed

    Song, Zheng-Mei; Chen, Ni; Liu, Jia-Hui; Tang, Huan; Deng, Xiaoyong; Xi, Wen-Song; Han, Kai; Cao, Aoneng; Liu, Yuanfang; Wang, Haifang

    2015-10-01

    Titanium dioxide nanoparticles (TiO2 NPs) are widely found in food-related consumer products. Understanding the effect of TiO2 NPs on the intestinal barrier and absorption is essential and vital for the safety assessment of orally administrated TiO2 NPs. In this study, the cytotoxicity and translocation of two native TiO2 NPs, and these two TiO2 NPs pretreated with the digestion simulation fluid or bovine serum albumin were investigated in undifferentiated Caco-2 cells, differentiated Caco-2 cells and Caco-2 monolayer. TiO2 NPs with a concentration less than 200 µg ml(-1) did not induce any toxicity in differentiated cells and Caco-2 monolayer after 24 h exposure. However, TiO2 NPs pretreated with digestion simulation fluids at 200 µg ml(-1) inhibited the growth of undifferentiated Caco-2 cells. Undifferentiated Caco-2 cells swallowed native TiO2 NPs easily, but not pretreated NPs, implying the protein coating on NPs impeded the cellular uptake. Compared with undifferentiated cells, differentiated ones possessed much lower uptake ability of these TiO2 NPs. Similarly, the traverse of TiO2 NPs through the Caco-2 monolayer was also negligible. Therefore, we infer the possibility of TiO2 NPs traversing through the intestine of animal or human after oral intake is quite low. This study provides valuable information for the risk assessment of TiO2 NPs in food.

  4. A digital process for additive manufacturing of occlusal splints: a clinical pilot study

    PubMed Central

    Salmi, Mika; Paloheimo, Kaija-Stiina; Tuomi, Jukka; Ingman, Tuula; Mäkitie, Antti

    2013-01-01

    The aim of this study was to develop and evaluate a digital process for manufacturing of occlusal splints. An alginate impression was taken from the upper and lower jaws of a patient with temporomandibular disorder owing to cross bite and wear of the teeth, and then digitized using a table laser scanner. The scanned model was repaired using the 3Data Expert software, and a splint was designed with the Viscam RP software. A splint was manufactured from a biocompatible liquid photopolymer by stereolithography. The system employed in the process was SLA 350. The splint was worn nightly for six months. The patient adapted to the splint well and found it comfortable to use. The splint relieved tension in the patient's bite muscles. No sign of tooth wear or significant splint wear was detected after six months of testing. Modern digital technology enables us to manufacture clinically functional occlusal splints, which might reduce costs, dental technician working time and chair-side time. Maximum-dimensional errors of approximately 1 mm were found at thin walls and sharp corners of the splint when compared with the digital model. PMID:23614943

  5. Mass analysis addition to the Differential Ion Flux Probe (DIFP) study

    NASA Technical Reports Server (NTRS)

    Wright, K. H., Jr.; Jolley, Richard

    1994-01-01

    The objective of this study is to develop a technique to measure the characteristics of space plasmas under highly disturbed conditions; e.g., non-Maxwellian plasmas with strong drifting populations and plasmas contaminated by spacecraft outgassing. The approach, conducted in conjunction with current MSFC activities, is to extend the capabilities of the Differential Ion Flux Probe (DIFP) to include a high throughput mass measurement that does not require either high voltage or contamination sensitive devices such as channeltron electron multipliers or microchannel plates. This will significantly reduce the complexity and expense of instrument fabrication, testing, and integration of flight hardware compared to classical mass analyzers. The feasibility of the enhanced DIFP has been verified by using breadboard test models in a controlled plasma environment. The ability to manipulate particles through the instrument regardless of incident angle, energy, or ionic component has been amply demonstrated. The energy analysis mode is differential and leads directly to a time-of-flight mass measurement. With the new design, the DIFP will separate multiple ion streams and analyze each stream independently for ion flux intensity, velocity (including direction of motion), mass, and temperature (or energy distribution). In particular, such an instrument will be invaluable on follow-on electrodynamic TSS missions and, possibly, for environmental monitoring on the space station.

  6. Value addition of Palmyra palm and studies on the storage life.

    PubMed

    Chaurasiya, A K; Chakraborty, I; Saha, J

    2014-04-01

    Palmyra palm (Borassus flabellifer L.) belonging to the family Palmae is referred to as tree of life with several uses including food, beverage, fibre, medicinal and timber. Unfortunately, the nutritionally enriched pulp of ripened palm has limited commercial use. Extraction of pulp has been accomplished by using water and heat to ensure maximum pulp recovery. Different recipes were tried for the preparation of two uncommon value added products like palm spread and palm toffee. On the basis of biochemical composition, organoleptic scores, microbial estimation and storage study both under ambient and refrigerated conditions; the suitable recipe was selected with the maximum acceptability. Gradual increase in total soluble solid (TSS), total sugar and reducing sugar while decrease in ascorbic acid, pH, β-carotene and protein content of processed products have been observed irrespective of storage condition. The results obtained from sensory evaluation and microbial status revealed that palm spread and toffee remained acceptable up to 9 months and 8 months, respectively at ambient temperature. The income per rupee investment for these two products was found to be remunerative. PMID:24741173

  7. 15. CYLINDER DETAILS; DETAILS OF STEEL FOR CYLINDERS NO. 50 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. CYLINDER DETAILS; DETAILS OF STEEL FOR CYLINDERS NO. 50 (PIER 5) AND NO. 66 (PIER 6), DWG. 83, CH BY AF, ECL, APPROVED BY O.F. LACKEY, MAY 18, 1908 - Baltimore Inner Harbor, Pier 5, South of Pratt Street between Market Place & Concord Street, Baltimore, Independent City, MD

  8. 10. CYLINDER DETAILS: DETAIL OF STEEL FOR CYLINDER NO. 59, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. CYLINDER DETAILS: DETAIL OF STEEL FOR CYLINDER NO. 59, PIER NO. 6, DWG. 86, 3/4" = 1', MADE BY A.F., CHECKED BY E.C.L., APPROVED BY O.F. LACKEY, JUNE 2, 1908 - Baltimore Inner Harbor, Pier 6, South of Pratt Street between Concord Street & Jones Falls outlet, Baltimore, Independent City, MD

  9. Physical, chemical, and biological data for detailed study of irrigation drainage in the San Juan River area, New Mexico, 1993-94, with supplemental data, 1991-95

    USGS Publications Warehouse

    Thomas, C.L.; Lusk, J.D.; Bristol, R.S.; Wilson, R.M.; Shineman, A.R.

    1997-01-01

    In response to increasing concern about the quality of irrigation drainage and its potential effects on fish, wildlife, and human health, the U.S. Department of the Interior formed an interbureau task group to prepare a plan for investigating water- quality problems on irrigation projects sponsored by the Department of the Interior. The San Juan River area in northwestern New Mexico was one of the areas designated for study. Investigators collected water, bottom-sediment, soil, and biological samples at more than 50 sites in the San Juan River area during 1993-94. Sample sites included (1) sites located within Department of the Interior irrigation project service areas, or areas that receive drainage from irrigation projects; (2) reference sites for comparison with irrigation project sites; and (3) sites located within the reach of the San Juan River from Navajo Dam to 10 miles downstream from the dam. The types of habitat sampled included the main stem of the San Juan River, backwater areas adjacent to the San Juan River, tributaries to the San Juan River, ponds, seeps, irrigation-delivery canals, irrigation-drainage canals, a stock tank, and shallow ground water. The types of media sampled included water, bottom sediment, soil, aquatic plants, aquatic invertebrates, amphibians, and fish. Semipermeable-membrane devices were used as a surrogate medium to sample both air and water in some instances. Sample measurements included concentrations of major ions, trace elements, organochlorine pesticides, polychlorinated biphenyls, polycyclic-aromatic-hydrocarbon compounds, and stable isotopes of hydrogen and oxygen. This report presents tables of physical, chemical, and biological data collected for the U.S. Department of the Interior National Irrigation Water-Quality Program. Additionally, supplemental physical, chemical, and biological data collected in association with the Navajo Indian Irrigation Project are presented.

  10. Are there three main subgroups within the patellofemoral pain population? A detailed characterisation study of 127 patients to help develop targeted intervention (TIPPs)

    PubMed Central

    Selfe, James; Janssen, Jessie; Callaghan, Michael; Witvrouw, Erik; Sutton, Chris; Richards, Jim; Stokes, Maria; Martin, Denis; Dixon, John; Hogarth, Russell; Baltzopoulos, Vasilios; Ritchie, Elizabeth; Arden, Nigel; Dey, Paola

    2016-01-01

    Background Current multimodal approaches for the management of non-specific patellofemoral pain are not optimal, however, targeted intervention for subgroups could improve patient outcomes. This study explores whether subgrouping of non-specific patellofemoral pain patients, using a series of low cost simple clinical tests, is possible. Method The exclusivity and clinical importance of potential subgroups was assessed by applying à priori test thresholds (1 SD) from seven clinical tests in a sample of adult patients with non-specific patellofemoral pain. Hierarchical clustering and latent profile analysis, were used to gain additional insights into subgroups using data from the same clinical tests. Results 130 participants were recruited, 127 had complete data: 84 (66%) female, mean age 26 years (SD 5.7) and mean body mass index 25.4 (SD 5.83), median (IQR) time between onset of pain and assessment was 24 (7–60) months. Potential subgroups defined by the à priori test thresholds were not mutually exclusive and patients frequently fell into multiple subgroups. Using hierarchical clustering and latent profile analysis three subgroups were identified using 6 of the 7 clinical tests. These subgroups were given the following nomenclature: (1) ‘strong’, (2) ‘weak and tighter’ and (3) ‘weak and pronated foot’. Conclusions We conclude that three subgroups of patellofemoral patients may exist based on the results of six clinical tests which are feasible to perform in routine clinical practice. Further research is needed to validate these findings in other data sets and, if supported by external validation, to see if targeted interventions for these subgroups improve patient outcomes. PMID:26834185

  11. Genetic association studies in complex disease: disentangling additional predisposing loci from associated neutral loci using a constrained - permutation approach.

    PubMed

    Spijker, G T; Nolte, I M; Jansen, R C; Te Meerman, G J

    2005-01-01

    In the process of genetically mapping a complex disease, the question may arise whether a certain polymorphism is the only causal variant in a region. A number of methods can answer this question, but unfortunately these methods are optimal for bi-allelic loci only. We wanted to develop a method that is more suited for multi-allelic loci, such as microsatellite markers. We propose the Additional Disease Loci Test (ADLT): the alleles at an additional locus are permuted within the subsample of haplotypes that have identical alleles at the predisposing locus. The hypothesis being tested is, whether the predisposing locus is the sole factor predisposing to the trait that is in LD with the additional locus under study. We applied ADLT to simulated datasets and a published dataset on Type 1 Diabetes, genotyped for microsatellite markers in the HLA-region. The method showed the expected number of false-positive results in the absence of additional loci, but proved to be more powerful than existing methods in the presence of additional disease loci. ADLT was especially superior in datasets with less LD or with multiple predisposing alleles. We conclude that the ADLT can be useful in identifying additional disease loci.

  12. Effect of Additives on Green Sand Molding Properties using Design of Experiments and Taguchi's Quality Loss Function - An Experimental Study

    NASA Astrophysics Data System (ADS)

    Desai, Bhagyashree; Mokashi, Pavani; Anand, R. L.; Burli, S. B.; Khandal, S. V.

    2016-09-01

    The experimental study aims to underseek the effect of various additives on the green sand molding properties as a particular combination of additives could yield desired sand properties. The input parameters (factors) selected were water and powder (Fly ash, Coconut shell and Tamarind) in three levels. Experiments were planned using design of experiments (DOE). On the basis of plans, experiments were conducted to understand the behavior of sand mould properties such as compression strength, shear strength, permeability number with various additives. From the experimental results it could be concluded that the factors have significant effect on the sand properties as P-value found to be less than 0.05 for all the cases studied. The optimization based on quality loss function was also performed. The study revealed that the quality loss associated with the tamarind powder was lesser compared to other additives selected for the study. The optimization based on quality loss function and the parametric analysis using ANOVA suggested that the tamarind powder of 8 gm per Kg of molding sand and moisture content of 7% yield better properties to obtain sound castings.

  13. A Pilot Study to Examine the Effect of Additional Structured Outdoor Playtime on Preschoolers' Physical Activity Levels

    ERIC Educational Resources Information Center

    Alhassan, Sofiya; Nwaokelemeh, Ogechi; Lyden, Kate; Goldsby, TaShauna; Mendoza, Albert

    2013-01-01

    The impact of additional structured outdoor playtime on preschoolers'; physical activity (PA) level is unclear. The purpose of this pilot study was to explore the effects of increasing structured outdoor playtime on preschoolers'; PA levels. Eight full-day classrooms (n = 134 children) from two preschool programmes were randomised into a treatment…

  14. STUDY OF THE EFFECT OF CHLORINE ADDITION ON MERCURY OXIDATION BY SCR CATALYST UNDER SIMULATED SUBBITUMINOUS COAL FLUE GAS

    EPA Science Inventory

    An entrained flow reactor is used to study the effect of addition of chlorine-containing species on the oxidation of elemental mercury (Hgo)by a selective catalytic reduction (SCR) catalyst in simulated subbituminous coal combustion flue gas. The combustion flue gas was doped wit...

  15. Evaluating Learning and Attitudes on Tissue Engineering: A Study of Children Viewing Animated Digital Dome Shows Detailing the Biomedicine of Tissue Engineering

    PubMed Central

    Wilson, Anna C.; Gonzalez, Laura L.

    2012-01-01

    Informal science education creates opportunities for the general public to learn about complex health and science topics. Tissue engineering is a fast-growing field of medical science that combines advanced chemistries to create synthetic scaffolds, stem cells, and growth factors that individually or in combination can support the bodies own healing powers to remedy a range of maladies. Health literacy about this topic is increasingly important as our population ages and as treatments become more technologically advanced. We are using a science center planetarium as a projection space to engage and educate the public about the science and biomedical research that supports tissue engineering. The purpose of this study was to test the effectiveness of the films that we have produced for part of the science center planetarium demographic, specifically children ranging in age from 7 to 16 years. A two-group pre- and post-test design was used to compare children's learning and attitude changes in response to the two versions of the film. One version uses traditional voice-over narration; the other version uses dialog between two animated characters. The results of this study indicate that children demonstrated increases in knowledge of the topic with either film format, but preferred the animated character version. The percentage change in children's scores on the knowledge questions given before and after viewing the show exhibited an improvement from 23% correct to 61% correct on average. In addition, many of the things that the children reported liking were part of the design process of the art–science collaboration. Other results indicated that before viewing the shows 77% of the children had not even heard about tissue engineering and only 17% indicated that they were very interested in it, whereas after viewing the shows, 95% indicated that tissue engineering was a good idea. We also find that after viewing the show, 71% of the children reported that the show

  16. Mechanistic and computational studies of the atom transfer radical addition of CCl4 to styrene catalyzed by copper homoscorpionate complexes.

    PubMed

    Muñoz-Molina, José María; Sameera, W M C; Álvarez, Eleuterio; Maseras, Feliu; Belderrain, Tomás R; Pérez, Pedro J

    2011-03-21

    Experimental as well as theoretical studies have been carried out with the aim of elucidating the mechanism of the atom transfer radical addition (ATRA) of styrene and carbon tetrachloride with a Tp(x)Cu(NCMe) complex as the catalyst precursor (Tp(x) = hydrotrispyrazolyl-borate ligand). The studies shown herein demonstrate the effect of different variables in the kinetic behavior. A mechanistic proposal consistent with theoretical and experimental data is presented.

  17. The fine details of evolution.

    PubMed

    Laskowski, Roman A; Thornton, Janet M; Sternberg, Michael J E

    2009-08-01

    Charles Darwin's theory of evolution was based on studies of biology at the species level. In the time since his death, studies at the molecular level have confirmed his ideas about the kinship of all life on Earth and have provided a wealth of detail about the evolutionary relationships between different species and a deeper understanding of the finer workings of natural selection. We now have a wealth of data, including the genome sequences of a wide range of organisms, an even larger number of protein sequences, a significant knowledge of the three-dimensional structures of proteins, DNA and other biological molecules, and a huge body of information about the operation of these molecules as systems in the molecular machinery of all living things. This issue of Biochemical Society Transactions contains papers from oral presentations given at a Biochemical Society Focused Meeting to commemorate the 200th Anniversary of Charles Darwin's birth, held on 26-27 January 2009 at the Wellcome Trust Conference Centre, Cambridge. The talks reported on some of the insights into evolution which have been obtained from the study of protein sequences, structures and systems. PMID:19614583

  18. Computed tomography:the details.

    SciTech Connect

    Doerry, Armin Walter

    2007-07-01

    Computed Tomography (CT) is a well established technique, particularly in medical imaging, but also applied in Synthetic Aperture Radar (SAR) imaging. Basic CT imaging via back-projection is treated in many texts, but often with insufficient detail to appreciate subtleties such as the role of non-uniform sampling densities. Herein are given some details often neglected in many texts.

  19. Physical, chemical, and biological data for detailed study of the Sun River Irrigation Project, Freezout Lake Wildlife Management Area, and Benton Lake National Wildlife Refuge, west-central Montana, 1990-92, with selected data for 1987-89

    USGS Publications Warehouse

    Lambing, J.H.; Nimick, D.A.; Knapton, J.R.; Palawski, D.U.

    1994-01-01

    Physical chemical, and biological data were collected in the lower Sun River area of west-central Montana during 1990-92 as part of a U.S. Department of the Interior detailed study of the extent, magnitude, sources, and potential biological impacts of contaminants associated with irrigation drainage. Physical and chemical data were collected from areas within and near the Sun River Irrigation Project and from wetland areas receiving irrigation drainage. Biological data were collected from areas in and near Freezout Lake Wildlife Management Area and Benton Lake National Wildlife Refuge. Additional biological data were collected previously during 1987-89 as part of a U.S. Fish and Wildlife Service program. This report presents data for selenium and other potentially toxic constituents in solid-phase, water, and biological media. Data consist of concentrations of major and trace elements in soil and drill cores; concen- trations of major ions, nutrients, and trace elements in ground water and surface water; and trace-element concentrations in bottom sediment and biological tissue. Hydrogeologic data for domestic and test wells and daily streamflow data for selected sites also are included.

  20. The Finer Details: Climate Modeling

    NASA Technical Reports Server (NTRS)

    2000-01-01

    If you want to know whether you will need sunscreen or an umbrella for tomorrow's picnic, you can simply read the local weather report. However, if you are calculating the impact of gas combustion on global temperatures, or anticipating next year's rainfall levels to set water conservation policy, you must conduct a more comprehensive investigation. Such complex matters require long-range modeling techniques that predict broad trends in climate development rather than day-to-day details. Climate models are built from equations that calculate the progression of weather-related conditions over time. Based on the laws of physics, climate model equations have been developed to predict a number of environmental factors, for example: 1. Amount of solar radiation that hits the Earth. 2. Varying proportions of gases that make up the air. 3. Temperature at the Earth's surface. 4. Circulation of ocean and wind currents. 5. Development of cloud cover. Numerical modeling of the climate can improve our understanding of both the past and, the future. A model can confirm the accuracy of environmental measurements taken. in, the past and can even fill in gaps in those records. In addition, by quantifying the relationship between different aspects of climate, scientists can estimate how a future change in one aspect may alter the rest of the world. For example, could an increase in the temperature of the Pacific Ocean somehow set off a drought on the other side of the world? A computer simulation could lead to an answer for this and other questions. Quantifying the chaotic, nonlinear activities that shape our climate is no easy matter. You cannot run these simulations on your desktop computer and expect results by the time you have finished checking your morning e-mail. Efficient and accurate climate modeling requires powerful computers that can process billions of mathematical calculations in a single second. The NCCS exists to provide this degree of vast computing capability.

  1. FT-IR spectral, DFT studies and detailed vibrational assignment on N,N',N"-tris(2-aminoethyl)-phosphoric acid triamide.

    PubMed

    Unsalan, O; Szolnoki, B; Toldy, A; Marosi, G

    2012-12-01

    Structure of N,N',N"-tris(2-aminoethyl)-phosphoric acid triamide (TEDAP), which is a phosphorus-containing reactive amine crosslinking agent and flame retardant material as well, identified by Fourier transform infrared (FT-IR) spectroscopy and quantum chemical calculations. The FT-IR spectrum of TEDAP, being a recently synthesized new compound, has been recorded in the 4000-650 cm(-1) region for the first time. The molecular geometry and vibrational wavenumbers of the compound in its ground state have been calculated by using Density Functional Theory (DFT) using B3LYP functional with 6-311++G(d,p) basis set. All calculations were performed with Gaussian09 software. The obtained vibrational wavenumbers and optimized geometric parameters were seen to be in good agreement with the experimental data. Furthermore, assignments of each vibrational mode were interpreted in terms of potential energy distributions (PED) in detail.

  2. Enantioselective conjugate addition of nitro compounds to α,β-unsaturated ketones: an experimental and computational study.

    PubMed

    Manzano, Rubén; Andrés, José M; Álvarez, Rosana; Muruzábal, María D; de Lera, Ángel R; Pedrosa, Rafael

    2011-05-16

    A series of chiral thioureas derived from easily available diamines, prepared from α-amino acids, have been tested as catalysts in the enantioselective Michael additions of nitroalkanes to α,β-unsaturated ketones. The best results are obtained with the bifunctional catalyst prepared from L-valine. This thiourea promotes the reaction with high enantioselectivities and chemical yields for aryl/vinyl ketones, but the enantiomeric ratio for alkyl/vinyl derivatives is very modest. The addition of substituted nitromethanes led to the corresponding adducts with excellent enantioselectivity but very poor diastereoselectivity. Evidence for the isomerization of the addition products has been obtained from the reaction of chalcone with [D(3)]nitromethane, which shows that the final addition products epimerize under the reaction conditions. The epimerization explains the low diastereoselectivity observed in the formation of adducts with two adjacent tertiary stereocenters. Density functional studies of the transition structures corresponding to two alternative activation modes of the nitroalkanes and α,β-unsaturated ketones by the bifunctional organocatalyst have been carried out at the B3LYP/3-21G* level. The computations are consistent with a reaction model involving the Michael addition of the thiourea-activated nitronate to the ketone activated by the protonated amine of the organocatalyst. The enantioselectivities predicted by the computations are consistent with the experimental values obtained for aryl- and alkyl-substituted α,β-unsaturated ketones.

  3. Kinetic study of the activation of banana juice enzymatic browning by the addition of maltosyl-beta-cyclodextrin.

    PubMed

    López-Nicolás, José M; Pérez-López, Antonio J; Carbonell-Barrachina, Angel; García-Carmona, Francisco

    2007-11-14

    In recent years, the use of cyclodextrins (CDs) as antibrowning agents in fruit juices has received growning attention. However, there has been no detailed study of the behavior of these molecules as substances, which can lead to the darkening of foods. In this paper, when the color of fresh banana juice was evaluated in the presence of different CDs, the evolution of several color parameters was the opposite of that observed in other fruit juices. Moreover, a kinetic model based on the complexation by CDs of the natural browning inhibitors present in banana is developed for the first time to clarify the enzymatic browning activation of banana juice. Finally, the apparent complexation constant between the natural polyphenoloxidase inhibitors present in banana juice and maltosyl-beta-CD was calculated (Kci = 27.026 +/- 0.212 mM (-1)). PMID:17929887

  4. A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography

    SciTech Connect

    Raguvarun, K. Balasubramaniam, Krishnan Rajagopal, Prabhu; Palanisamy, Suresh; Nagarajah, Romesh; Kapoor, Ajay; Hoye, Nicholas; Curiri, Dominic

    2015-03-31

    Additive manufacturing methods are gaining increasing popularity for rapidly and efficiently manufacturing parts and components in the industrial context, as well as for domestic applications. However, except when used for prototyping or rapid visualization of components, industries are concerned with the load carrying capacity and strength achievable by additive manufactured parts. In this paper, the wire-arc additive manufacturing (AM) process based on gas tungsten arc welding (GTAW) has been examined for the internal structure and constitution of components generated by the process. High-resolution 3D X-ray tomography is used to gain cut-views through wedge-shaped parts created using this GTAW additive manufacturing process with titanium alloy materials. In this work, two different control conditions for the GTAW process are considered. The studies reveal clusters of porosities, located in periodic spatial intervals along the sample cross-section. Such internal defects can have a detrimental effect on the strength of the resulting AM components, as shown in destructive testing studies. Closer examination of this phenomenon shows that defect clusters are preferentially located at GTAW traversal path intervals. These results highlight the strong need for enhanced control of process parameters in ensuring components with minimal defects and higher strength.

  5. Microwave synthesis of ZnO@mSiO₂ for detailed antifungal mode of action study: understanding the insights into oxidative stress.

    PubMed

    Mitra, Shouvik; Patra, Prasun; Pradhan, Saheli; Debnath, Nitai; Dey, Kushal Kumar; Sarkar, Sampad; Chattopadhyay, Dhrubajyoti; Goswami, Arunava

    2015-04-15

    A simple chemical method has been devised for deliberate incorporation of zinc oxide nanoparticles (ZNPs) within mesoporous nanosilica (mSiO2) matrix to yield zinc oxide nanoparticles embedded in mesoporous nanosilica (ZnO@mSiO2). ZnO@mSiO2 inhibited the growth of four strains of fungi in a dose dependant manner. A series of biochemical assays revealed generation of oxidative stress from ZnO@mSiO2 for such biocidal response. We proposed transient superoxide and its subsequent conversion to H2O2 played a pivotal role behind such biocidal response as revealed from our systematic evaluation. This resulted morphological alteration of fungi through increase in number of facets, in correlation we found up-regulation in oxidative stress related genes. Bioavailability within the fungal sample was confirmed from microscopic, spectroscopic, biophysical techniques. Protein carbonylation of fungal species was the chemical outcome of such above mentioned stress and quantified by high performance liquid chromatography (HPLC) via subsequent hydrazone derivatization. Several in vitro and in vivo evaluations revealed the biocompatibility of ZnO@mSiO2. Altogether this report claims a new biocidal agent with a detailed mode of action focusing on the origin and quantification of oxidative stress through biophysical and biochemical techniques for the first time for real time applications. PMID:25585293

  6. A DETAILED STUDY OF NON-THERMAL X-RAY PROPERTIES AND INTERSTELLAR GAS TOWARD THE γ-RAY SUPERNOVA REMNANT RX J1713.7–3946

    SciTech Connect

    Sano, H.; Fukuda, T.; Yoshiike, S.; Sato, J.; Horachi, H.; Kuwahara, T.; Torii, K.; Hayakawa, T.; Matsumoto, H.; Inutsuka, S.; Yamamoto, H.; Tachihara, K.; Tanaka, T.; Inoue, T.; Kawamura, A.; Okuda, T.; Mizuno, N.; Yamazaki, R.; Onishi, T.; Mizuno, A.; and others

    2015-02-01

    We have carried out a spectral analysis of the Suzaku X-ray data in the 0.4-12 keV range toward the shell-type very high-energy γ-ray supernova remnant (SNR) RX J1713.7–3946. The aims of this analysis are to estimate detailed X-rays spectral properties at a high angular resolution up to 2 arcmin and to compare them with the interstellar gas. The X-ray spectrum is non-thermal and used to calculate absorbing column density, photon index, and absorption-corrected X-ray flux. The photon index varies significantly from 2.1 to 2.9. It is shown that the X-ray intensity is well correlated with the photon index, especially in the west region, with a correlation coefficient of 0.81. The X-ray intensity tends to increase with the averaged interstellar gas density while the dispersion is relatively large. The hardest spectra, with photon indexes of less than 2.4, are found outside of the central 10 arcmin of the SNR, from the north to the southeast (∼430 arcmin{sup 2}) and from the southwest to the northwest (∼150 arcmin{sup 2}). The former region shows low interstellar gas density, while the latter shows high interstellar gas density. We present a discussion of possible scenarios that explain the distribution of the photon index and its relationship with the interstellar gas.

  7. A detailed study of Au-Ni bimetal synthesized by the phase separation mechanism for the cathode of low-temperature solid oxide fuel cells

    NASA Astrophysics Data System (ADS)

    Yang, Tao; Rodrigues de Almeida, Carlos Manuel; Ramasamy, Devaraj; Almeida Loureiro, Francisco José

    2014-12-01

    A facile co-reduction and annealing synthesis route of nanospheric particles of Au-Ni bimetal with adjustable composition was developed. In a typical synthesis, a direct co-reduction of HAuCl4.4H2O and NiCl2 in aqueous solution was performed with the assistance of reductive NaBH4 and an anionic surfactant sodium dodecyl sulfate (SDS) functioned as the structure-directing agent. Ultrasonic mixing was used at the same time to control the size of the particles. The morphology, microstructure and the state of the surface atoms were analyzed in detail. These nanospheres showed enhanced electrocatalytic activity towards oxygen reduction reaction than that of pure Au nanoparticles, demonstrated in the low temperature SOFC as cathode. The maximum power density generated is 810 mW cm-2 at 550 °C. This is a promising route of taking advantages the Phase Separation Mechanism to greatly reduce the use of noble metals in the ORR field without sacrificing the electrocatalytic activity.

  8. A Study of Power Systems Stability Enhancement Effects by Excitation Control of Superconducting Generator with High Response Excitation based on Detailed Excitation Circuit Model

    NASA Astrophysics Data System (ADS)

    Wu, Guohong; Shirato, Hideyuki

    SCG (Superconducting Generator) has a superconducting field winding, which leads to many advantages such as small size, high generation efficiency, low impedance, and so on, and be considered as one of the candidates to meet the needs of high stability and high efficiency in the future power system networks. SCG with high response excitation is especially expected to be able to enhance the transient stability of power system by its SMES (Superconducting Magnetic Energy System) effect. The SMES effect of SCG is recognized that its behaviors are dominated by the structures and controls of its excitation system. For this reason, in order to verify exactly how the SMES effect of SCG influences on the power system stability, the electrical circuits of SCG high response excitation are modeled in detail for conducting digital simulation, and its influence on excitation voltage and active power output of SCG are discussed as well. The simulation results with a typical one machine - infinite bus power system model shows that the SMES effect can be certainly obtained when its exciting power is supplied from SCG terminal bus and may considerably lead to an improvement of power system transient stability.

  9. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  10. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  11. Microstructural Development and Technical Challenges in Laser Additive Manufacturing: Case Study with a 316L Industrial Part

    NASA Astrophysics Data System (ADS)

    Marya, Manuel; Singh, Virendra; Marya, Surendar; Hascoet, Jean Yves

    2015-08-01

    Additive manufacturing (AM) brings disruptive changes to the ways parts, and products are designed, fabricated, tested, qualified, inspected, marketed, and sold. These changes introduce novel technical challenges and concerns arising from the maturity and diversity of today's AM processes, feedstock materials, and process parameter interactions. AM bears a resemblance with laser and electron beam welding in the so-called conduction mode, which involves a multitude of dynamic physical events between the projected feedstock and a moving heat source that eventually influence AM part properties. For this paper, an air vent was selected for its thin-walled, hollow, and variable cross section, and limited size. The studied air vents, randomly selected from a qualification batch, were fabricated out of 316L stainless steel using a 4 kW fiber laser powder-fed AM system, referred to as construction laser additive direct (CLAD). These were systematically characterized by microhardness indentation, visual examination, optical and scanning electron microscopy, and electron-back-scattering diffraction in order to determine AM part suitability for service and also broadly discuss metallurgical phenomena. The paper then briefly expands the discussion to include additional engineering alloys and further analyze relationships between AM process parameters and AM part properties, consistently utilizing past experience with the same powder-fed CLAD 3D printer, the well-established science and technology of welding and joining, and recent publications on additive manufacturing.

  12. Effect of One Percent Chlorhexidine Addition on the Antibacterial Activity and Mechanical Properties of Sealants: An in vitro Study

    PubMed Central

    Asokan, Sharath; John, J Baby; Priya, PR Geetha; Devi, Jagadeesan Gnana

    2015-01-01

    ABSTRACT Aim: The aim of the study was to evaluate the effect of addition of 1% chlorhexidine digluconate solution on the antibacterial activity and mechanical properties of glass ionomer and resin based sealant. Materials and methods: Conventional glass ionomer sealant (GIS) (Fuji VII, Japan) and resin sealant (Clinpro 3M ESPE, USA) were used in this study. Chlorhexidine digluconate (CHX) (20%) liquid was added to both the sealants, and the concentration of chlorhexidine in sealants was adjusted to 1%. The sealants were divided into four groups as: group A (GIS), group B (GIS + 1% CHX), group C (resin sealant), group D (resin sealant + 1% CHX). Five cylindrical specimens were prepared in each group. Their antibacterial activity against Streptococcus mutans and Lactobacillus acidophilus, and their mechanical properties (compressive strength and diametrical tensile strength) were assessed. Mann-Whitney and Wilcoxon signed rank test were used appropriately for statistical analysis (SPSS version 19). Result: Addition of one percent chlorhexidine significantly increased the antibacterial activity of both the sealants. There was a significant difference between groups A and B (p < 0.009), and groups C and D (p < 0.008). There was no significant difference in the mechanical properties of the sealants. Conclusion: Addition of one percent chlorhexidine to the glass ionomer and resin based sealants provided sufficient antibacterial activity, without significantly affecting the mechanical property of the sealants. How to cite this article: Shanmugaavel AK, Asokan S, John JB, Geetha Priya PR, Gnana Devi J. Effect of one percent Chlorhexidine Addition on the Antibacterial Activity and Mechanical Properties of Sealants: An in vitro Study. Int J Clin Pediatr Dent 2015;8(3):196-201. PMID:26628854

  13. A study on the effect of halloysite nanoparticle addition on the strength of glass fiber reinforced plastic

    NASA Astrophysics Data System (ADS)

    Kim, Yun-Hae; Park, Soo-Jeong; Lee, Jin-Woo; Moon, Kyung-Man

    2015-03-01

    Halloysite nanotube, which has been used in the polymer, has been spotlighted as a useful functional materials in the improvement of mechanical properties. In the current study, we established the optimal nanoparticle dispersion and analyzed the mechanical characteristics and the behavior of composites reinforced by HNTs have been synthesized by dispersing HNTs to the unsaturated polyester resin (UPR) and their mechanical characteristics, especially the tensile strength, interlaminar shear strength have been analyzed. Additionally, the reinforcement effect and its variation according to the amount of HNTs was also studied.

  14. Structural Studies of Medicago truncatula Histidinol Phosphate Phosphatase from Inositol Monophosphatase Superfamily Reveal Details of Penultimate Step of Histidine Biosynthesis in Plants.

    PubMed

    Ruszkowski, Milosz; Dauter, Zbigniew

    2016-05-01

    The penultimate enzyme in the histidine biosynthetic pathway catalyzes dephosphorylation of l-histidinol 1-phosphate (HOLP) into l-histidinol. The recently discovered in Arabidopsis thaliana plant-type histidinol phosphate phosphatase (HPP) shares no homology with the two other HPP superfamilies known previously in prokaryotes and resembles myo-inositol monophosphatases (IMPases). In this work, identification of an HPP enzyme from a model legume, Medicago truncatula (MtHPP) was based on the highest sequence identity to A. thaliana enzyme. Biochemical assays confirmed that MtHPP was able to cleave inorganic phosphate from HOLP but not from d-myo-inositol-1-phosphate, the main substrate of IMPases. Dimers of MtHPP, determined by size exclusion chromatography, in the presence of CO2 or formaldehyde form mutual, methylene-bridged cross-links between Lys(158) and Cys(245) residues. Four high resolution crystal structures, namely complexes with HOLP (substrate), l-histidinol (product), and PO4 (3-) (by-product) as well as the structure showing the cross-linking between two MtHPP molecules, provide detailed structural information on the enzyme. Based on the crystal structures, the enzymatic reaction mechanism of IMPases is accustomed to fit the data for MtHPP. The enzymatic reaction, which requires Mg(2+) cations, is catalyzed mainly by amino acid residues from the N-terminal domain. The C-terminal domain, sharing little identity with IMPases, is responsible for the substrate specificity (i.e. allows the enzyme to distinguish between HOLP and d-myo-inositol-1-phosphate). Structural features, mainly the presence of a conserved Asp(246), allow MtHPP to bind HOLP specifically. PMID:26994138

  15. Effect of Eu ion incorporation on the emission behavior of Y2O3 nanophosphors: A detailed study of structural and optical properties

    NASA Astrophysics Data System (ADS)

    Kumar, Y.; Pal, Mou; Herrera, M.; Mathew, X.

    2016-10-01

    In order to investigate the effect of doping concentration on the luminescence behavior of yttrium oxide (Y2O3) europium (Eu) doped nanoparticles were prepared by co-precipitation method. Incorporation of Eu ion in Y2O3 matrix is clearly reflected in structural and optical properties of the doped Y2O3 phosphor. Cathodoluminescence (CL) spectroscopy proves the presence of strong Eu3+ emissions along with the presence of an additional weak band corresponding to electronic transitions 4f65d1 (7FJ) - 4f7 (8S7/2) of the Eu2+. The presence of Eu3+ and Eu2+ ions in Y2O3 nanoparticles have been additionally confirmed by XPS analysis. Luminescence band corresponding to Eu3+ ions appears in both CL and photoluminescence (PL) spectra, covering the orange-red emissions from 580 to 710 nm. Vibrational properties analyzed through Raman spectroscopy have revealed the evolution of different peaks associated with Eu emission in the doped Y2O3 nanocrystals.

  16. A quantum chemical study of the mechanisms of olefin addition to group 9 transition metal dioxo compounds.

    PubMed

    Ahmed, Issahaku; Tia, Richard; Adei, Evans

    2016-01-01

    triplet PES than on the singlet PES for the formation of similar analogues. There are fewer competitive reaction pathways on the triplet surface than on the singlet PES. Also, cycloadditions that seem impossible on the singlet PES seem possible on the doublet and or triplet PESs, this is the case typically for the Rh and Co complexes, illustrating the importance of multiple spin states in organometallic reactions.Graphical AbstractTable of Contents Synopsis: A study of the mechanism of ethylene addition to MO2(CH2)(CH3)(M=Co,Rh,Ir) shows the reactions of the Co complex have lower activation barriers for the preferred [3+2] and [2+2] addition pathways and fewer side reactions than those of Rh and Ir. Reactions are more feasible and selective on the triplet PES than on the singlet PES. These illustrate the importance of multiple spin states in organometallic reactions and shows catalyst activity and selectivity decreases down the group.

  17. A fundamental study of the oxidation behavior of SI primary reference fuels with propionaldehyde and DTBP as an additive

    NASA Astrophysics Data System (ADS)

    Johnson, Rodney

    In an effort to combine the benefits of SI and CI engines, Homogeneous Charge Compression Ignition (HCCI) engines are being developed. HCCI combustion is achieved by controlling the temperature, pressure, and composition of the fuel and air mixture so that autoignition occurs in proper phasing with the piston motion. This control system is fundamentally more challenging than using a spark plug or fuel injector to determine ignition timing as in SI and CI engines, respectively. As a result, this is a technical barrier that must be overcome to make HCCI engines applicable to a wide range of vehicles and viable for high volume production. One way to tailor the autoignition timing is to use small amounts of ignition enhancing additives. In this study, the effect of the addition of DTBP and propionaldehyde on the autoignition behavior of SI primary reference fuels was investigated. The present work was conducted in a new research facility built around a single cylinder Cooperative Fuels Research (CFR) octane rating engine but modified to run in HCCI mode. It focused on the effect of select oxygenated hydrocarbons on hydrocarbon fuel oxidation, specifically, the primary reference fuels n-heptane and iso-octane. This work was conducted under HCCI operating conditions. Previously, the operating parameters for this engine were validated for stable combustion under a wide range of operating parameters such as engine speeds, equivalence ratios, compression ratios and inlet manifold temperature. The stable operating range under these conditions was recorded and used for the present study. The major focus of this study was to examine the effect of the addition of DTBP or propionaldehyde on the oxidation behavior of SI primary reference fuels. Under every test condition the addition of the additives DTBP and propionaldehyde caused a change in fuel oxidation. DTBP always promoted fuel oxidation while propionaldehyde promoted oxidation for lower octane number fuels and delayed

  18. Efficient eco-friendly inverted quantum dot sensitized solar cells† †Electronic supplementary information (ESI) available: TEM images of QDs, XPS spectra, UV-vis and PL spectra of the sensitized electrodes, details about photophysical characterization and IPCE spectra interpretation. See DOI: 10.1039/c5ta06769c Click here for additional data file.

    PubMed Central

    Park, Jinhyung; Sajjad, Muhammad T.; Jouneau, Pierre-Henri; Ruseckas, Arvydas; Faure-Vincent, Jérôme; Reiss, Peter

    2016-01-01

    Recent progress in quantum dot (QD) sensitized solar cells has demonstrated the possibility of low-cost and efficient photovoltaics. However, the standard device structure based on n-type materials often suffers from slow hole injection rate, which may lead to unbalanced charge transport. We have fabricated efficient p-type (inverted) QD sensitized cells, which combine the advantages of conventional QD cells with p-type dye sensitized configurations. Moreover, p-type QD sensitized cells can be used in highly promising tandem configurations with n-type ones. QDs without toxic Cd and Pb elements and with improved absorption and stability were successfully deposited onto mesoporous NiO electrode showing good coverage and penetration according to morphological analysis. Detailed photophysical charge transfer studies showed that high hole injection rates (108 s–1) observed in such systems are comparable with electron injection in conventional n-type QD assemblies. Inverted solar cells fabricated with various QDs demonstrate excellent power conversion efficiencies of up to 1.25%, which is 4 times higher than the best values for previous inverted QD sensitized cells. Attempts to passivate the surface of the QDs show that traditional methods of reduction of recombination in the QD sensitized cells are not applicable to the inverted architectures. PMID:27478616

  19. Applicability of the DPPH assay for evaluating the antioxidant capacity of food additives - inter-laboratory evaluation study -.

    PubMed

    Shimamura, Tomoko; Sumikura, Yoshihiro; Yamazaki, Takeshi; Tada, Atsuko; Kashiwagi, Takehiro; Ishikawa, Hiroya; Matsui, Toshiro; Sugimoto, Naoki; Akiyama, Hiroshi; Ukeda, Hiroyuki

    2014-01-01

    An inter-laboratory evaluation study was conducted in order to evaluate the antioxidant capacity of food additives by using a 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. Four antioxidants used as existing food additives (i.e., tea extract, grape seed extract, enju extract, and d-α-tocopherol) and 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox) were used as analytical samples, and 14 laboratories participated in this study. The repeatability relative standard deviation (RSD(r)) of the IC50 of Trolox, four antioxidants, and the Trolox equivalent antioxidant capacity (TEAC) were 1.8-2.2%, 2.2-2.9%, and 2.1-2.5%, respectively. Thus, the proposed DPPH assay showed good performance within the same laboratory. The reproducibility relative standard deviation (RSD(R)) of IC50 of Trolox, four antioxidants, and TEAC were 4.0-7.9%, 6.0-11%, and 3.7-9.3%, respectively. The RSD(R)/RSD(r) values of TEAC were lower than, or nearly equal to, those of IC50 of the four antioxidants, suggesting that the use of TEAC was effective for reducing the variance among the laboratories. These results showed that the proposed DPPH assay could be used as a standard method to evaluate the antioxidant capacity of food additives.

  20. The influence of deposit control additives on nitrogen oxides emissions from spark ignition engines (case study: Tehran).

    PubMed

    Bidhendi, Gholamreza Nabi; Zand, Ali Daryabeigi; Tabrizi, Alireza Mikaeili; Pezeshk, Hamid; Baghvand, Akbar

    2007-04-15

    In the present research, the influence of a deposit control additive on NOx emissions from two types of gasoline engine vehicles i.e., Peykan (base on Hillman) and Pride (South Korea Kia motors) was studied. Exhaust NOx emissions were measured in to stages, before decarbonization process and after that. Statistical analysis was conducted on the measurement results. Results showed that NOx emissions from Peykans increased 0.28% and NOx emissions from Pride automobiles decreased 6.18% on average, due to the elimination of engine deposits. The observed variations were not statistically and practically significant. The results indicated that making use of detergent additives is not an effective way to reduce the exhaust NOx emissions from gasoline engine vehicles. PMID:19069943

  1. A mechanistic study of the addition of alcohol to a five-membered ring silene via a photochemical reaction.

    PubMed

    Su, Ming-Der

    2016-03-21

    The mechanism for the photochemical rearrangement of a cyclic divinyldisilane (1-Si) in its first excited state ((1)π → (1)π*) is determined using the CAS/6-311G(d) and MP2-CAS/6-311++G(3df,3pd) levels of theory. The photoproduct, a cyclic silene, reacts with various alcohols to yield a mixture of cis- and trans- adducts. The two reaction pathways are denoted as the cis- addition path (path A) and the trans-addition path (path B). These model studies demonstrate that conical intersections play a crucial role in the photo-rearrangements of cyclic divinyldisilanes. The theoretical evidence also demonstrates that the addition of alcohol to a cyclic divinyldisilane follows the reaction path: cyclic divinyldisilane → Franck-Condon region → conical intersection → photoproduct (cyclic silene) → local intermediate (with alcohol) → transition state → cis- or trans-adduct. The theoretical studies demonstrate that the steric effects as well as the concentrations of CH3OH must have a dominant role in determining the yields of the final adducts by stereochemistry. The same mechanism for the carbon derivative (1-C) is also considered in this work. However, the theoretical results indicate that 1-C does not undergo a methanol addition reaction via the photochemical reaction pathway, since its energy of conical intersection (S1/S0-CI-C) is more than that of its FC (FC-C). The reason for these phenomena could be that the atomic radius of carbon is much smaller than that of silicon (77 and 117 pm, respectively). As a result, the conformation for 1-C is more sterically congested than that for 1-Si, along the 1,3-silyl-migration pathway. PMID:26928893

  2. A Detailed Photometric and Spectroscopic Study of the 2011 Outburst of the Recurrent Nova T Pyxidis from 0.8 to 250 Days after Discovery

    NASA Astrophysics Data System (ADS)

    Surina, F.; Hounsell, R. A.; Bode, M. F.; Darnley, M. J.; Harman, D. J.; Walter, F. M.

    2014-05-01

    We investigated the optical light curve of T Pyx during its 2011 outburst by compiling a database of Solar Mass Ejection Imager (SMEI) and AAVSO observations. The SMEI light curve, providing unprecedented detail covering t = 1.5-49 days post-discovery, was divided into four phases based on the idealized nova optical light curve: the initial rise (1.5-3.3 days), the pre-maximum halt (3.3-13.3 days), the final rise (14.7-27.9 days), and the early decline (27.9+ days). The SMEI light curve contains a strongly detected period of 1.44 ± 0.05 days during the pre-maximum halt phase. These oscillations resemble those found in recent thermonuclear runaway models arising from instabilities in the expanding envelope. No spectral variations that mirror the light curve periodicity were found, however. The marked dip at t ~ 22-24 days just before the light curve maximum at t = 27.9 days may represent the same (shorter duration) phenomenon seen in other novae observed by SMEI and present in some model light curves. The spectra from the 2 m Liverpool Telescope and SMARTS 1.5 m telescope were obtained from t = 0.8-80.7 and 155.1-249.9 days, covering the major phases of development. The nova was observed very early in its rise where a distinct high-velocity ejection phase was evident with initially derived V ej ~ 4000 km s-1. A marked drop occurred at t = 5.7 days, and then a gradual increase in derived V ej to stabilize at ~1500 km s-1 at the pre-maximum halt. Here, we propose two different stages of mass loss, a short-lived phase occurring immediately after outburst and lasting ~6 days, followed by a more steadily evolving and higher mass loss phase. The overall spectral development follows that typical of a classical nova and comparison with the photometric behavior reveals consistencies with the simple evolving pseudo-photosphere model of the nova outburst. Comparing optical spectra to X-ray and radio light curves, weak [Fe X] 6375 Å emission was marginally detected before the

  3. A detailed photometric and spectroscopic study of the 2011 outburst of the recurrent nova T Pyxidis from 0.8 to 250 days after discovery

    SciTech Connect

    Surina, F.; Bode, M. F.; Darnley, M. J.; Harman, D. J.; Hounsell, R. A.; Walter, F. M.

    2014-05-01

    We investigated the optical light curve of T Pyx during its 2011 outburst by compiling a database of Solar Mass Ejection Imager (SMEI) and AAVSO observations. The SMEI light curve, providing unprecedented detail covering t = 1.5-49 days post-discovery, was divided into four phases based on the idealized nova optical light curve: the initial rise (1.5-3.3 days), the pre-maximum halt (3.3-13.3 days), the final rise (14.7-27.9 days), and the early decline (27.9+ days). The SMEI light curve contains a strongly detected period of 1.44 ± 0.05 days during the pre-maximum halt phase. These oscillations resemble those found in recent thermonuclear runaway models arising from instabilities in the expanding envelope. No spectral variations that mirror the light curve periodicity were found, however. The marked dip at t ∼ 22-24 days just before the light curve maximum at t = 27.9 days may represent the same (shorter duration) phenomenon seen in other novae observed by SMEI and present in some model light curves. The spectra from the 2 m Liverpool Telescope and SMARTS 1.5 m telescope were obtained from t = 0.8-80.7 and 155.1-249.9 days, covering the major phases of development. The nova was observed very early in its rise where a distinct high-velocity ejection phase was evident with initially derived V {sub ej} ∼ 4000 km s{sup –1}. A marked drop occurred at t = 5.7 days, and then a gradual increase in derived V {sub ej} to stabilize at ∼1500 km s{sup –1} at the pre-maximum halt. Here, we propose two different stages of mass loss, a short-lived phase occurring immediately after outburst and lasting ∼6 days, followed by a more steadily evolving and higher mass loss phase. The overall spectral development follows that typical of a classical nova and comparison with the photometric behavior reveals consistencies with the simple evolving pseudo-photosphere model of the nova outburst. Comparing optical spectra to X-ray and radio light curves, weak [Fe X] 6375

  4. Assessing clinical outcomes of patients with acute calculous cholecystitis in addition to the Tokyo grading: a retrospective study.

    PubMed

    Cheng, Wei-Chun; Chiu, Yen-Cheng; Chuang, Chiao-Hsiung; Chen, Chiung-Yu

    2014-09-01

    The management of acute cholecystitis is still based on clinical expertise. This study aims to investigate whether the outcome of acute cholecystitis can be related to the severity criteria of the Tokyo guidelines and additional clinical comorbidities. A total of 103 patients with acute cholecystitis were retrospectively enrolled and their medical records were reviewed. They were all classified according to therapeutic modality, including early cholecystectomy and antibiotic treatment with or without percutaneous cholecystostomy. The impact of the Tokyo guidelines and the presence of comorbidities on clinical outcome were assessed by univariate and multivariate regression analyses. According to Tokyo severity grading, 48 patients were Grade I, 31 patients were Grade II, and 24 patients were Grade III. The Grade III patients had a longer hospital stay than Grade II and Grade I patients (15.2 days, 9.2 days, and 7.3 days, respectively, p < 0.05). According to multivariate analysis, patients with Grade III Tokyo severity, higher Charlson's Comorbidity Score, and encountering complications had a longer hospital stay. Based on treatment modality, surgeons selected the patients with less severity and fewer comorbidities for cholecystectomy, and these patients had a shorter hospital stay. In addition to the grading of the Tokyo guidelines, comorbidities had an additional impact on clinical outcomes and should be an important consideration when making therapeutic decisions.

  5. Spectrophotometric study of complexation equilibria with H-point standard addition and H-point curve isolation methods.

    PubMed

    Abdollahi, H; Zeinali, S

    2004-01-01

    The use of H-point curve isolation (HPCIM) and H-point standard addition methods (HPSAM) for spectrophotometric studies of complex formation equilibria are proposed. One step complex formation, two successive stepwise and mononuclear complex formation systems, and competitive complexation systems are studied successfully by the proposed methods. HPCIM is used for extracting the spectrum of complex or sum of complex species and HPSAM is used for calculation of equilibrium concentrations of ligand for each sample. The outputs of these procedures are complete concentration profiles of equilibrium system, spectral profile of intermediate components, and good estimation of conditional formation constants. The reliability of the method is evaluated using model data. Spectrophotometric studies of murexide-calcium, dithizone-nickel, methyl thymol blue (MTB)-copper, and competition of murexide and sulfate ions for complexation with zinc, are used as experimental model systems with different complexation stoichiometries and spectral overlapping of involved components.

  6. Probiotics in addition to antibiotics for the treatment of acute tonsillitis: a randomized, placebo-controlled study.

    PubMed

    Gilbey, P; Livshits, L; Sharabi-Nov, A; Avraham, Y; Miron, D

    2015-05-01

    Probiotics are live microorganisms which, when administered in adequate amounts, confer a health benefit on the host. The probiotic Streptococcus salivarius has been shown to be effective in reducing the frequency of recurrent pharyngeal infections in children and adult populations. However, probiotics have not yet been evaluated in the treatment of acute pharyngotonsillitis in adults. We aimed to examine whether the addition of S. salivarius probiotics to the routine therapy of acute pharyngotonsillitis in adult patients may shorten disease duration and reduce symptom severity. This study was a prospective, randomized, placebo-controlled, double-blinded study comparing treatment with probiotics to placebo in addition to antibiotics in patients who were hospitalized with severe pharyngotonsillitis. Laboratory results, pain levels, body temperature, and daily volume of fluids consumed were recorded for both groups. Sixty participants were recruited, 30 for each group. No statistically significant differences between the two groups were observed regarding any of the major clinical and laboratory parameters examined. Supplement probiotic treatment with S. salivarius in patients with acute pharyngotonsillitis treated with penicillin is ineffective in relation to the parameters examined in this study and we cannot, therefore, recommend the use of S. salivarius during active pharyngotonsillar infection treated with penicillin.

  7. A study on the effect of the polymeric additive HPMC on morphology and polymorphism of ortho-aminobenzoic acid crystals

    NASA Astrophysics Data System (ADS)

    Simone, E.; Cenzato, M. V.; Nagy, Z. K.

    2016-07-01

    In the present study, the effect of Hydroxy Propyl Methyl Cellulose (HPMC) on the crystallization of ortho-aminobenzoic acid (OABA) was investigated by seeded and unseeded cooling crystallization experiments. The influence of HPMC on the induction time, crystal shape of Forms I and II of OABA and the polymorphic transformation time was studied. Furthermore, the capability of HPMC to inhibit growth of Form I was evaluated quantitatively and modeled using population balance equations (PBE) solved with the method of moments. The additive was found to strongly inhibit nucleation and growth of Form I as well as to increase the time for the polymorphic transformation from Form II to I. Solvent was also found to influence the shape of Form I crystals at equal concentrations of HPMC. In situ process analytical technology (PAT) tools, including Raman spectroscopy, focused beam reflectance measurement (FBRM) and attenuated total reflectance (ATR) UV-vis spectroscopy were used in combination with off-line techniques, such as optical microscopy, scanning electron microscopy (SEM), Raman spectroscopy, Malvern Mastersizer and differential scanning calorimetry (DSC) to study the crystals produced. The results illustrate how shape, size and stability of the two polymorphs of OABA can be controlled and tailored using a polymeric additive.

  8. The addition of GTN to capsaicin cream reduces the discomfort associated with application of capsaicin alone. A volunteer study.

    PubMed

    McCleane, G J; McLaughlin, M

    1998-11-01

    In a double blind, placebo controlled trial of 40 volunteers, the burning discomfort associated with application of capsaicin cream (0.025%) was compared to placebo, GTN cream (1.33%) and to the combination of capsaicin cream (0.025%) plus GTN cream 1.33%. Median VAS for burning pain were 0 for the placebo, GTN and GTN + capsaicin groups and 3 for the capsaicin group after single application of each cream at daily intervals. This study demonstrates that after single application the addition of GTN to capsaicin significantly reduces the burning discomfort associated with application of capsaicin alone.

  9. A SEARCH FOR ADDITIONAL PLANETS IN FIVE OF THE EXOPLANETARY SYSTEMS STUDIED BY THE NASA EPOXI MISSION

    SciTech Connect

    Ballard, Sarah; Charbonneau, David; Holman, Matthew J.; Christiansen, Jessie L.; Deming, Drake; Barry, Richard K.; Kuchner, Marc J.; Livengood, Timothy A.; Hewagama, Tilak; Hampton, Don L.; Lisse, Carey M.; Seager, Sara; Veverka, Joseph F.

    2011-05-01

    We present time series photometry and constraints on additional planets in five of the exoplanetary systems studied by the EPOCh (Extrasolar Planet Observation and Characterization) component of the NASA EPOXI mission: HAT-P-4, TrES-3, TrES-2, WASP-3, and HAT-P-7. We conduct a search of the high-precision time series for photometric transits of additional planets. We find no candidate transits with significance higher than our detection limit. From Monte Carlo tests of the time series using putative periods from 0.5 days to 7 days, we demonstrate the sensitivity to detect Neptune-sized companions around TrES-2, sub-Saturn-sized companions in the HAT-P-4, TrES-3, and WASP-3 systems, and Saturn-sized companions around HAT-P-7. We investigate in particular our sensitivity to additional transits in the dynamically favorable 3:2 and 2:1 exterior resonances with the known exoplanets: if we assume coplanar orbits with the known planets, then companions in these resonances with HAT-P-4b, WASP-3b, and HAT-P-7b would be expected to transit, and we can set lower limits on the radii of companions in these systems. In the nearly grazing exoplanetary systems TrES-3 and TrES-2, additional coplanar planets in these resonances are not expected to transit. However, we place lower limits on the radii of companions that would transit if the orbits were misaligned by 2.{sup 0}0 and 1.{sup 0}4 for TrES-3 and TrES-2, respectively.

  10. Theoretical study of the oxidation mechanisms of naphthalene initiated by hydroxyl radicals: the OH-addition pathway.

    PubMed

    Shiroudi, Abolfazl; Deleuze, Michael S; Canneaux, Sébastien

    2014-07-01

    The oxidation mechanisms of naphthalene by OH radicals under inert (He) conditions have been studied using density functional theory along with various exchange-correlation functionals. Comparison has been made with benchmark CBS-QB3 theoretical results. Kinetic rate constants were correspondingly estimated by means of transition state theory and statistical Rice-Ramsperger-Kassel-Marcus (RRKM) theory. Comparison with experiment confirms that, on the OH-addition reaction pathway leading to 1-naphthol, the first bimolecular reaction step has an effective negative activation energy around -1.5 kcal mol(-1), whereas this step is characterized by an activation energy around 1 kcal mol(-1) on the OH-addition reaction pathway leading to 2-naphthol. Effective rate constants have been calculated according to a steady state analysis upon a two-step model reaction mechanism. In line with experiment, the correspondingly obtained branching ratios indicate that, at temperatures lower than 410 K, the most abundant product resulting from the oxidation of naphthalene by OH radicals must be 1-naphthol. The regioselectivity of the OH(•)-addition onto naphthalene decreases with increasing temperatures and decreasing pressures. Because of slightly positive or even negative activation energies, the RRKM calculations demonstrate that the transition state approximation breaks down at ambient pressure (1 bar) for the first bimolecular reaction steps. Overwhelmingly high pressures, larger than 10(5) bar, would be required for restoring to some extent (within ∼5% accuracy) the validity of this approximation for all the reaction channels that are involved in the OH-addition pathway. Analysis of the computed structures, bond orders, and free energy profiles demonstrate that all reaction steps involved in the oxidation of naphthalene by OH radicals satisfy Leffler-Hammond's principle. Nucleus independent chemical shift indices and natural bond orbital analysis also show that the computed

  11. Can additional urban development have major impacts on streamflow of a peri-urban catchment? A case study from Portugal

    NASA Astrophysics Data System (ADS)

    Ferreira, Carla; Walsh, Rory; Nunes, João; Steenhuis, Tammo; de Lima, João; Coelho, Celeste; Ferreira, António

    2016-04-01

    It is well known that urban development brings about changes in hydrological response. Relatively little, however, is known about impacts on streamflow during urban development in the Mediterranean climate. This paper examines changes in streamflow resulting from the construction of an enterprise park, a major road and apartment blocks in a small partially urbanized peri-urban catchment (6.2 km2) in central Portugal. These developments led to an increase in urban area from 32% to 40% over a five-year period (hydrological years 2008/09-2012/13). In the initial two-year period minor land-use changes increased impervious surfaces from 12.8% to 13.2%. The subsequent three-year period led to a further 17.2% increase in impervious area. Streamflow was recorded by a V-notch weir at the catchment outlet. Rainfall was recorded at a weather station 0.5km north of the catchment, and by five tipping-bucket raingauges installed in January 2011 within the study catchment. Annual runoff and storm runoff coefficients ranged from 14% to 21% and 9% to 14%, respectively, recorded in 2011/12 and 2012/13. Although these differences in runoff were caused in part by variation in rainfall, the comparison between 2009/10 (pre-) and 2012/13 (post-additional urban development), with broadly similar rainfall (887mm vs 947mm, respectively) and evapotranspiration (740mm vs 746mm), showed a 43% increase in storm runoff (from 90mm to 129mm), resulting from additional overland flow generated largely by the 4.4% increase in impervious surfaces. The additional urban development also led to changes in hydrograph parameters. The increase in storm runoff was not progressive over the study period, but regression lines of storm runoff against rainstorm parameters exhibited higher vertical positions in 2012/13 than 2008/09. Increasing peak flows, however, were more progressive over the study period, with annual regression lines displaying higher vertical positions, but with a clear distance between pre

  12. A detailed microscopic study of the changes in the aorta of experimental model of postmenopausal rats fed with repeatedly heated palm oil

    PubMed Central

    Adam, Siti Khadijah; Das, Srijit; Jaarin, Kamsiah

    2009-01-01

    Hypercholesterolaemia, increase in lipid peroxidation and hyperhomocysteinaemia may contribute to the pathogenesis of atherosclerosis. This study was performed to examine the effects of repeatedly heated palm oil mixed with 2% cholesterol diet on atherosclerosis in oestrogen-deficient postmenopausal rats. Ovariectomy causes disruption of tunica intima layer of the rat aorta simulating a postmenopausal condition in females. Twenty-four ovariectomized female Sprague–Dawley rats were divided into four groups. The control group received 2% cholesterol diet without palm oil. A diet with 2% cholesterol content fortified with fresh, once-heated and five-times-heated palm oil was given to the other treatment groups. The rats were sacrificed at the end of 4 months of study and the aortic arch tissue was processed for histomorphometry and electron microscopy. On observation, there was disruption of the intimal layer of the ovariectomized rat aorta. There was no obvious ultrastructural change in the aorta of the rats fed with fresh palm oil. The ultrastructural changes were minimal with once-heated palm oil, in which there was a focal disruption of the endothelial layer. The focal disruption was more pronounced with five-times-heated palm oil. The results of this study show that the ingestion of fresh palm oil may have a protective effect on the aorta but such a protective action may be lost when the palm oil is repeatedly heated. The study may be clinically important for all postmenopausal women who are susceptible to atherosclerosis. PMID:19563614

  13. Effect of low-addition soft contact lenses with decentered optical design on myopia progression in children: a pilot study

    PubMed Central

    Fujikado, Takashi; Ninomiya, Sayuri; Kobayashi, Takuma; Suzaki, Asaki; Nakada, Mitsuhiko; Nishida, Kohji

    2014-01-01

    Purpose To investigate the effect of low-addition soft contact lenses (CLs) with decentered optical design on the progression of myopia in children in a pilot study. Subjects and methods Twenty-four Japanese children age 10–16 years with baseline myopia of −0.75 to −3.50 D sphere and ≤1.00 D cylinder were studied. The new CLs were designed to have a nasal decentration with the optical center centered on the line of sight, and with progressive-addition power of +0.5 D peripherally. Monofocal soft CLs were used as controls. A pair of new CLs or control CLs was randomly assigned to the children, and they wore the lenses for 12 months during the first phase. Then, the type of CLs was changed, ie, a crossover design, and the children were observed for another 12 months during the second phase. The end points were changes in axial length and refractive error (spherical equivalent) under cycloplegia. Results The change of axial length in the new-CL and control-CL groups was not different between 12 months and baseline, the change of axial length between 12 months and 1 month in the new-CL group (0.09±0.08 mm) was significantly smaller (47%) than that in the control-CL group (0.17±0.08 mm, P<0.05). During the same period, the change of refractive error in the new-CL group was not significantly different from that in the control group. Neither the change in axial length nor refractive error in the new-CL group was significantly different from those in the control-CL group in the second phase. Conclusion This pilot study suggests that low-addition soft CLs with decentered optical design can reduce the degree of axial elongation in myopic children after an initial transient phase of CL wear. The reduction of the progression of myopia by low-addition soft CLs warrants further investigations. PMID:25284981

  14. Detailed Study of High-pT Neutral Pion Suppression and Azimuthal Anisotropy in Au + Au Collisions at sqrt(s_NN) = 200 GeV

    SciTech Connect

    Adler, S. S.; Awes, Terry C; Batsouli, Sotiria; Cianciolo, Vince; Efremenko, Yuri; Read Jr, Kenneth F; Silvermyr, David O; Sorensen, Soren P; Stankus, Paul W; Young, Glenn R; Zhang, Chun; PHENIX, Collaboration

    2007-01-01

    Measurements of neutral pion production at midrapidity in {radical}(s{sub NN}) = 200 GeV Au+Au collisions as a function of transverse momentum, p{sub T}, collision centrality, and angle with respect to reaction plane are presented. The data represent the final {pi}{sup 0} results from the PHENIX experiment for the first RHIC Au+Au run at design center-of-mass-energy. They include additional data obtained using the PHENIX Level-2 trigger with more than a factor of three increase in statistics over previously published results for p{sub T} > 6 GeV/c. We evaluate the suppression in the yield of high-p{sub T} {pi}{sup 0}'s relative to point-like scaling expectations using the nuclear modification factor R{sub AA}. We present the p{sub T} dependence of R{sub AA} for nine bins in collision centrality. We separately integrate R{sub AA} over larger p{sub T} bins to show more precisely the centrality dependence of the high-p{sub T} suppression. We then evaluate the dependence of the high-p{sub T} suppression on the emission angle {Delta}{phi} of the pions with respect to event reaction plane for 7 bins in collision centrality. We show that the yields of high-p{sub T} {pi}{sup 0}'s vary strongly with {Delta}{phi}, consistent with prior measurements. We show that this variation persists in the most peripheral bin accessible in this analysis. For the peripheral bins we observe no suppression for neutral pions produced aligned with the reaction plane while the yield of {pi}{sup 0}'s produced perpendicular to the reaction plane is suppressed by more than a factor of 2. We analyze the combined centrality and {Delta}{phi} dependence of the {pi}{sup 0} suppression in different p{sub T} bins using different possible descriptions of parton energy loss dependence on jet path-length averages to determine whether a single geometric picture can explain the observed suppression pattern.

  15. Revisiting the Seductive Details Effect in Multimedia Learning: Context-Dependency of Seductive Details

    ERIC Educational Resources Information Center

    Ozdemir, Devrim; Doolittle, Peter

    2015-01-01

    The purpose of this study was to investigate the effects of context-dependency of seductive details on recall and transfer in multimedia learning environments. Seductive details were interesting yet irrelevant sentences in the instructional text. Two experiments were conducted. The purpose of Experiment 1 was to identify context-dependent and…

  16. A DFT study of addition reaction between fragment ion (CH₂) units and fullerene (C₆₀) molecule.

    PubMed

    Zaragoza, Irineo Pedro; Vergara, Jaime; Pérez-Manríquez, Liliana; Salcedo, Roberto

    2011-05-01

    The theoretical study of the interaction between CH(2) and fullerene (C(60)) suggests the existence of an addition reaction mechanism; this feature is studied by applying an analysis of electronic properties. Several different effects are evident in this interaction as a consequence of the particular electronic transfer which occurs during the procedure. The addition or insertion of the methylene group results in a process, where the inclusion of CH(2) into a fullerene bond produces the formation of several geometric deformations. A simulation of these procedures was carried out, taking advantage of the dynamic semi-classical Born-Oppenheimer approximation. Dynamic aspects were analyzed at different speeds, for the interaction between the CH(2) group and the two bonds: CC (6, 6) and CC (6, 5) respectively on the fullerene (C(60)) rings. All calculations which involved electrons employed DFT as well as exchange and functional correlation. The results indicate a tendency for the CH(2) fragment to attack the CC (6, 5) bond. PMID:20658255

  17. Study on the Reutilization of Clear Fracturing Flowback Fluids in Surfactant Flooding with Additives for Enhanced Oil Recovery (EOR)

    PubMed Central

    Dai, Caili; Wang, Kai; Liu, Yifei; Fang, Jichao; Zhao, Mingwei

    2014-01-01

    An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10−3 mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical. PMID:25409507

  18. Experimental study on the characteristics of ventilated cavitation around an underwater navigating body influenced by turbulent drag-reducing additives

    NASA Astrophysics Data System (ADS)

    Jiang, ChenXing; Li, FengChen

    2015-09-01

    In this study, a new control strategy for turbulent drag reduction involving ventilated cavitation is proposed. The configurational and hydrodynamic characteristics of ventilated cavities influenced by turbulent drag-reducing additives were experimentally studied in water tunnel. The test model was fixed in the water tunnel by a strut in the aft-part. Aqueous solutions of CTAC/NaSal (cetyltrimethyl ammonium chloride/sodium salicylate) with weight concentrations of 100, 200, 400 and 600 ppm (part per million), respectively, were injected into the ventilated air cavity from the edge of the cavitator with accurate control by an injection pump. The cavity configurations were recorded by a high-speed CCD camera. The hydrodynamic characteristics of the test model were measured by a six-component balance. Experimental results show that, within the presently tested cases, the lengths of cavity influenced by drag-reducing solution are smaller than normal condition (ventilated cavity) in water, but the asymmetry of the cavity is improved. The drag resisted by the test model is reduced dramatically (the maximum drag reduction can reach to 80%) and the re-entrant jet is more complex after the CTAC solution is injected into the cavity. Turbulent drag-reducing additives have the potential in enhancement of supercavitating asymmetry and further drag reduction.

  19. Does the addition of writing into a pharmacy communication skills course significantly impact student communicative learning outcomes? A pilot study.

    PubMed

    Lonie, John M; Rahim, Hamid

    2010-12-01

    The objective of this study was to determine if the addition of a reflective writing component in a fourth year (P-2) pharmacy communication skills course would significantly affect 2 measures of learning: (1) objective multiple choice examination questions and (2) a patient counseling Objective Structured Clinical Examination (OSCE) score. Using a nonequivalent group quasi-experimental retrospective comparison design, 98 randomly selected final examination scores from students taking a non-writing intensive (NWI) communication skills course were compared with 112 randomly selected final examination scores from students that took a communication skills course in which students engaged in several reflective writing assignments. In addition, 91 randomly selected patient counseling OSCE scores from a NWI course were statistically compared with 112 scores from students that took the writing intensive (WI) course. There were statistically significant improvements in multiple choice examination scores in the group that took the reflective writing communication skills course. There was not a statistically significant difference in patient counseling OSCE scores after students completed the WI course. Studying the effects of using reflective writing assignments in communication skills courses may improve the retention and retrieval of information presented within the course.

  20. Abnormal calcium homeostasis in heart failure with preserved ejection fraction is related to both reduced contractile function and incomplete relaxation: an electromechanically detailed biophysical modeling study

    PubMed Central

    Adeniran, Ismail; MacIver, David H.; Hancox, Jules C.; Zhang, Henggui

    2015-01-01

    Heart failure with preserved ejection fraction (HFpEF) accounts for about 50% of heart failure cases. It has features of incomplete relaxation and increased stiffness of the left ventricle. Studies from clinical electrophysiology and animal experiments have found that HFpEF is associated with impaired calcium homeostasis, ion channel remodeling and concentric left ventricle hypertrophy (LVH). However, it is still unclear how the abnormal calcium homeostasis, ion channel and structural remodeling affect the electro-mechanical dynamics of the ventricles. In this study we have developed multiscale models of the human left ventricle from single cells to the 3D organ, which take into consideration HFpEF-induced changes in calcium handling, ion channel remodeling and concentric LVH. Our simulation results suggest that at the cellular level, HFpEF reduces the systolic calcium level resulting in a reduced systolic contractile force, but elevates the diastolic calcium level resulting in an abnormal residual diastolic force. In our simulations, these abnormal electro-mechanical features of the ventricular cells became more pronounced with the increase of the heart rate. However, at the 3D organ level, the ejection fraction of the left ventricle was maintained due to the concentric LVH. The simulation results of this study mirror clinically observed features of HFpEF and provide new insights toward the understanding of the cellular bases of impaired cardiac electromechanical functions in heart failure. PMID:25852567

  1. An Accuracy Assessment of the CALIOP/CALIPSO Version 2/Version 3 Daytime Aerosol Extinction Product Based on a Detailed Multi-Sensor, Multi-Platform Case Study

    NASA Technical Reports Server (NTRS)

    Kacenelenbogen, M.; Vaughan, M. A.; Redemann, J.; Hoff, R. M.; Rogers, R. R.; Ferrare, R. A.; Russell, P. B.; Hostetler, C. A.; Hair, J. W.; Holben, B. N.

    2011-01-01

    The Cloud Aerosol LIdar with Orthogonal Polarization (CALIOP), on board the CALIPSO platform, has measured profiles of total attenuated backscatter coefficient (level 1 products) since June 2006. CALIOP s level 2 products, such as the aerosol backscatter and extinction coefficient profiles, are retrieved using a complex succession of automated algorithms. The goal of this study is to help identify potential shortcomings in the CALIOP version 2 level 2 aerosol extinction product and to illustrate some of the motivation for the changes that have been introduced in the next version of CALIOP data (version 3, released in June 2010). To help illustrate the potential factors contributing to the uncertainty of the CALIOP aerosol extinction retrieval, we focus on a one-day, multi-instrument, multiplatform comparison study during the CALIPSO and Twilight Zone (CATZ) validation campaign on 4 August 2007. On that day, we observe a consistency in the Aerosol Optical Depth (AOD) values recorded by four different instruments (i.e. spaceborne MODerate Imaging Spectroradiometer, MODIS: 0.67 and POLarization and Directionality of Earth s Reflectances, POLDER: 0.58, airborne High Spectral Resolution Lidar, HSRL: 0.52 and ground-based AErosol RObotic NETwork, AERONET: 0.48 to 0.73) while CALIOP AOD is a factor of two lower (0.32 at 532 nm). This case study illustrates the following potential sources of uncertainty in the CALIOP AOD: (i) CALIOP s low signal-to-noise ratio (SNR) leading to the misclassification and/or lack of aerosol layer identification, especially close to the Earth s surface; (ii) the cloud contamination of CALIOP version 2 aerosol backscatter and extinction profiles; (iii) potentially erroneous assumptions of the aerosol extinction-to-backscatter ratio (Sa) used in CALIOP s extinction retrievals; and (iv) calibration coefficient biases in the CALIOP daytime attenuated backscatter coefficient profiles. The use of version 3 CALIOP extinction retrieval for our case

  2. Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Ding, Yaoyu; Kovacevic, Radovan

    2016-07-01

    Metallic structural materials continue to open new avenues in achieving exotic mechanical properties that are naturally unavailable. They hold great potential in developing novel products in diverse industries such as the automotive, aerospace, biomedical, oil and gas, and defense. Currently, the use of metallic structural materials in industry is still limited because of difficulties in their manufacturing. This article studied the feasibility of printing metallic structural materials with robotized laser-based metal additive manufacturing (RLMAM). In this study, two metallic structural materials characterized by an enlarged positive Poisson's ratio and a negative Poisson's ratio were designed and simulated, respectively. An RLMAM system developed at the Research Center for Advanced Manufacturing of Southern Methodist University was used to print them. The results of the tensile tests indicated that the printed samples successfully achieved the corresponding mechanical properties.

  3. A combined QM/MM study of the nucleophilic addition reaction of methanethiolate and N-methylacetamide.

    PubMed

    Byun, K; Gao, J

    2000-02-01

    A combined quantum mechanical (QM) and molecular mechanical (MM) method was used to study the nucleophilic addition reaction of methanethiolate to N-methylacetamide (NMA) in the gas phase and aqueous solution. At the B3LYP/aug-cc-pVDZ//HF/6-31 + G(d) level, the ion-dipole complex was found to be the global minimum on the potential energy surface in the gas phase with a binding energy of 21.2 kcal/mol. The complex has a C-S distance of 4.33 A, and no stabilized tetrahedral intermediate was located. The computed potential of mean force in water shows that solvent effects stabilize the reactants over the tetrahedral adduct by 36.5 kcal/mol, and that the tetrahedral intermediate does not exist for the present reaction in water. The present study provides an initial step for modeling the cysteine protease hydrolysis reactions in enzymes.

  4. Detailed Modeling of Higher Order Hierarchical Kepler Star Systems

    NASA Astrophysics Data System (ADS)

    Gore, Joanna; Orosz, Jerome A.

    2016-06-01

    Most stars have stellar companions (i.e. they exist in double, triple, or higher order configurations). Binary star systems are those which contain two stars. These systems are valued scientifically because they allow for the measurement of fundamental stellar properties such as masses and radii. These properties in turn allow for detailed studies of stellar evolution. The Kepler space telescope has discovered roughly 2900 eclipsing binary stars in its field of view. Various studies have shown that roughly 20% of the Kepler eclipsing binaries contain companions are are most likely triple star systems. We present a preliminary survey of the orbital properties of the tertiary bodies in a sample of thirty triple systems. In addition, a small number of the triple systems show eclipse events due to the third star. We present the results of detailed modeling of two of these systems, and discuss how in some cases these triple systems allow for extremely precise measurements of the fundamental stellar parameters.

  5. Hazard and risk assessment of a nanoparticulate cerium oxide-based diesel fuel additive - a case study.

    PubMed

    Park, Barry; Donaldson, Kenneth; Duffin, Rodger; Tran, Lang; Kelly, Frank; Mudway, Ian; Morin, Jean-Paul; Guest, Robert; Jenkinson, Peter; Samaras, Zissis; Giannouli, Myrsini; Kouridis, Haris; Martin, Patricia

    2008-04-01

    Envirox is a scientifically and commercially proven diesel fuel combustion catalyst based on nanoparticulate cerium oxide and has been demonstrated to reduce fuel consumption, greenhouse gas emissions (CO(2)), and particulate emissions when added to diesel at levels of 5 mg/L. Studies have confirmed the adverse effects of particulates on respiratory and cardiac health, and while the use of Envirox contributes to a reduction in the particulate content in the air, it is necessary to demonstrate that the addition of Envirox does not alter the intrinsic toxicity of particles emitted in the exhaust. The purpose of this study was to evaluate the safety in use of Envirox by addressing the classical risk paradigm. Hazard assessment has been addressed by examining a range of in vitro cell and cell-free endpoints to assess the toxicity of cerium oxide nanoparticles as well as particulates emitted from engines using Envirox. Exposure assessment has taken data from modeling studies and from airborne monitoring sites in London and Newcastle adjacent to routes where vehicles using Envirox passed. Data have demonstrated that for the exposure levels measured, the estimated internal dose for a referential human in a chronic exposure situation is much lower than the no-observed-effect level (NOEL) in the in vitro toxicity studies. Exposure to nano-size cerium oxide as a result of the addition of Envirox to diesel fuel at the current levels of exposure in ambient air is therefore unlikely to lead to pulmonary oxidative stress and inflammation, which are the precursors for respiratory and cardiac health problems. PMID:18444008

  6. Addition of immunosuppressive treatment to hemoperfusion is associated with improved survival after paraquat poisoning: a nationwide study.

    PubMed

    Wu, Wen-Pyng; Lai, Ming-Nan; Lin, Ching-Heng; Li, Yu-Fen; Lin, Ching-Yuang; Wu, Ming-Ju

    2014-01-01

    Paraquat poisoning associates very high mortality rate. Early treatment with hemoperfusion is strongly suggested by animal and human studies. Although the survival benefit of additional immunosuppressive treatment (IST) in combination with hemoperfusion is also reported since 1971, the large-scale randomized control trials to confirm the effects of IST is difficult to be executed. Therefore, we designed this nationwide large-scale population-based retrospective cohort study to investigate the outcome of paraquat poisoning with hemoperfusion and the additional effects of IST combined with hemoperfusion. This nationwide retrospective cohort study utilized data retrieved from the National Health Insurance Research Database (NHIRD) of Taiwan. A total of 1811 hospitalized patients with a diagnosis of paraquat poisoning who received hemoperfusion between 1997 and 2009 were enrolled. The mean age of all 1811 study subjects was 47.3 years. 70% was male. The overall survival rate was only 26.4%. Respiratory failure and renal failure were diagnosed in 56.2% and 36% patients. The average frequency of hemoperfusion was twice. IST was added in 42.2% patients. IST significantly increases survival rate (from 24.3% to 29.3%, P<0.001). The combined IST with methylprednisolone, cyclophosphamide and dexamethasone associates with the highest survival rate (48%, P<0.001). Moreover, patients younger than 45 years of age in the IST group had the best survival (41.0% vs. 33.7%, p<0.001). Our results support the use of IST with hemoperfusion for paraquat-poisoned patients. The best survival effect of IST is the combination of methylprednisolone, cyclophosphamide and daily dexamethasone, especially in patients with younger age.

  7. Dispersion interactions of carbohydrates with condensate aromatic moieties: theoretical study on the CH-π interaction additive properties.

    PubMed

    Kozmon, Stanislav; Matuška, Radek; Spiwok, Vojtěch; Koča, Jaroslav

    2011-08-21

    In this article we present the first systematic study of the additive properties (i.e. degree of additivity) of the carbohydrate-aromatic moiety CH-π dispersion interaction. The additive properties were studied on the β-D-glucopyranose, β-D-mannopyranose and α-L-fucopyranose complexes with the naphthalene molecule by comparing the monodentate (single CH-π) and bidentate (two CH-π) complexes. All model complexes were optimized using the DFT-D approach, at the BP/def2-TZVPP level of theory. The interaction energies were refined using single point calculations at highly correlated ab initio methods at the CCSD(T)/CBS level, calculated as E + (E(CCSD(T))-E(MP2))(Small Basis). Bidentate complexes show very strong interactions in the range from -10.79 up to -7.15 and -8.20 up to -6.14 kcal mol(-1) for the DFT-D and CCSD(T)/CBS level, respectively. These values were compared with the sum of interaction energies of the appropriate monodentate carbohydrate-naphthalene complexes. The comparison reveals that the bidentate complex interaction energy is higher (interaction is weaker) than the sum of monodentate complex interaction energies. Bidentate complex interaction energy corresponds to 2/3 of the sum of the appropriate monodentate complex interaction energies (averaging over all modeled carbohydrate complexes). The observed interaction energies were also compared with the sum of interaction energies of the corresponding previously published carbohydrate-benzene complexes. Also in this case the interaction energy of the bidentate complex was higher (i.e. weaker interaction) than the sum of interaction energies of the corresponding benzene complexes. However, the obtained difference is lower than before, while the bidentate complex interaction energy corresponds to 4/5 of the sum of interaction energy of the benzene complexes, averaged over all structures. The mentioned comparison might aid protein engineering efforts where amino acid residues phenylalanine or

  8. In-situ study of the influence of additives on the growth behavior of copper electrodeposits on copper single crystal

    NASA Astrophysics Data System (ADS)

    Wu, Aiwen

    Trace organic additives are known to be essential in obtaining desired metal electrodeposits in the microelectronic industry, however, fundamental design principles for their use and a scientific understanding of their interaction during electrodeposition is lacking. In the present study we investigated electrodeposition of copper on the Cu(100) surface in air-saturated or dearated acid-sulfate plating solutions containing several combinations of chloride and additives benzotriazole (BTA) and 3-mercapto propane sulfonic acid (MPSA) under galvanostatic pulse-current conditions. The electrodeposition process was followed using in-situ atomic force microscopy (AFM). AFM images were quantitatively analyzed by pattern-recognition and scaling procedures. In the absence of additives, copper deposits grew in a layer-by-layer mode from the earliest stage of deposition. The surface consisted of smooth terraces separated by steps. The scaling analysis result was consistent with a process dominated by surface diffusion and step growth. In chloride containing solutions, square-pyramidal mounds were initiated and grew to cover the surface. Mound slope increased with deposition time with no indication of reaching a steady-state value. This growth mode was consistent with a surface diffusion mechanism. The scaling result was similar to the additive-free system, but indicated that surface diffusion was more dominant in the presence of chloride. BTA inhibited the surface and produced nucleation-limited growth at hemispheroidal centers whose height to base radius aspect ratio increased linearly with deposition time. Nucleation and growth of three-dimensional nodules started randomly across the entire surface. The nodules were smaller in size than the mounds observed without BTA. The number and density of nodules were much higher than the mounds density. The deposit growth was dominated by a roughening mechanism that can be described by the random roughening term of a stochastic model

  9. Detailed study of water quality, bottom sediment, and biota associated with irrigation drainage in the Klamath Basin, California and Oregon, 1990-92

    USGS Publications Warehouse

    Dileanis, P.D.; Schwarzbach, S.E.; Bennett, Jewel

    1996-01-01

    The effect of irrigation drainage on the water quality and wildlife of the Klamath Basin in California and Oregon was evaluated during 1990-92 as part of the National Irrigation Water Quality Program of the U.S. Department of the Interior. The study focused on land serviced by the Bureau of Reclamation Klamath Project, which supplies irrigation water to agricultural land in the Klamath Basin and the Lost River Basin. The Tule Lake and Lower Klamath National Wildlife Refuges, managed by the U.S. Fish and Wildlife Service, are in the study area. These refuges provide critical resting and breeding habitat for waterfowl on the Pacific flyway and are dependent on irrigation drainwater from upstream agriculture for most of their water supply. Water-quality characteristics throughout the study area were typical of highly eutrophic systems during the summer months of 1991 and 1992. Dissolved-oxygen concentrations and pH tended to fluctuate each day in response to diurnal patterns of photosynthesis, and frequently exceeded criteria for protection of aquatic organisms. Nitrogen and phosphorus concentrations were generally at or above threshold levels characteristic of eutrophic lakes and streams. At most sites the bulk of dissolved nitrogen was organically bound. Elevated ammonia concentrations were common in the study area, especially down- stream of drain inputs. High pH of water increased the toxicity of ammonia, and concentrations exceeded criteria at sites upstream and downstream of irrigated land. Concentrations of ammonia in samples from small drains on the Tule Lake refuge leaseland were higher than those measured in the larger, integrating drains at primary monitoring sites. The mean ammonia concentration in leaseland drains [1.21 milligrams per liter (mg/L)] was significantly higher than the mean concentration in canals delivering water to the leaseland fields (0.065 mg/L) and higher than concentrations reported to be lethal to Daphnia magna (median lethal

  10. A study of application of remote sensing to river forecasting. Volume 2: Detailed technical report, NASA-IBM streamflow forecast model user's guide

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The Model is described along with data preparation, determining model parameters, initializing and optimizing parameters (calibration) selecting control options and interpreting results. Some background information is included, and appendices contain a dictionary of variables, a source program listing, and flow charts. The model was operated on an IBM System/360 Model 44, using a model 2250 keyboard/graphics terminal for interactive operation. The model can be set up and operated in a batch processing mode on any System/360 or 370 that has the memory capacity. The model requires 210K bytes of core storage, and the optimization program, OPSET (which was used previous to but not in this study), requires 240K bytes. The data band for one small watershed requires approximately 32 tracks of disk storage.

  11. A study of remote sensing as applied to regional and small watersheds. Volume 2: Supporting technical details. [using computerized simulation models

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The Stanford Watershed Model, the Kentucky Watershed Model and OPSET program, and the NASA-IBM system for simulation and analysis of watersheds are described in terms of their applications to the study of remote sensing of water resources. Specific calibration processes and input and output parameters that are instrumental in the simulations are explained for the following kinds of data: (1) hourly precipitation data; (2) daily discharge data; (3) flood hydrographs; (4) temperature and evaporation data; and (5) snowmelt data arrays. The Sensitivity Analysis Task, which provides a method for evaluation of any of the separate simulation runs in the form of performance indices, is also reported. The method is defined and a summary of results is given which indicates the values obtained in the simulation runs performed for Town Creek, Alabama; Alamosa Creek, Colorado; and Pearl River, Louisiana. The results are shown in tabular and plot graph form. For Vol. 1, see N74-27813.

  12. Charge ulse studies of transport phenomena in bilayer membranes. II. Detailed theory of steady-state behavior and application to valinomycin-mediated potassium transport.

    PubMed

    Feldberg, S W; Nakadomari, H

    1977-02-24

    The charge-pulse technique is applied to a study of valinomycin-mediated potassium transport across glycerol monooleate (GMO) bilayers. The theory, based on the Läuger-Stark model, is developed for the steady-state domain. The voltage dependences of the surface complexation reactions are also considered. The analysis of the data yields the folowing values for the rate constants: (see article). With the exception of this last ratio, all the values agree well with previously published data. The implication of the exponential term, 0.045, is that the plane of reaction for the surface complexation actually occurs a small distance within the membrane dielectric. If one presumes that the reaction plane is about half way between the plane of adsorbed complex and the membrane-water interface, one deduces that the complex "feels" only about 80% of the applied voltage across the membrane.

  13. A detailed evaluation of the Eta-CMAQ forecast model performance for O3, its related precursors, and meteorological parameters during the 2004 ICARTT study

    NASA Astrophysics Data System (ADS)

    Yu, Shaocai; Mathur, Rohit; Schere, Kenneth; Kang, Daiwen; Pleim, Jonathan; Otte, Tanya L.

    2007-06-01

    The Eta-Community Multiscale Air Quality (CMAQ) model's forecast performance for ozone (O3), its precursors, and meteorological parameters has been assessed over the eastern United States with the observations obtained by aircraft, ship, ozonesonde, and lidar and two surface networks (AIRNOW and AIRMAP) during the 2004 International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) study. The results at the AIRNOW sites show that the model was able to reproduce the day-to-day variations of observed daily maximum 8-hour O3 and captured the majority (73%) of observed daily maximum 8-hour O3 within a factor of 1.5 with normalized mean bias of 22%. The model in general reproduced O3 vertical distributions on most of the days at low altitudes, but consistent overestimations above ˜6 km are evident because of a combination of effects related to the specifications of lateral boundary conditions from the Global Forecast System (GFS) as well as the model's coarse vertical resolution in the upper free troposphere. The model captured the vertical variation patterns of the observed values for other parameters (HNO3, SO2, NO2, HCHO, and NOy_sum (NOy_sum = NO + NO2 + HNO3 + PAN)) with some exceptions, depending on the studied areas and air mass characteristics. The consistent underestimation of CO by ˜30% from surface to high altitudes is partly attributed to the inadequate representation of the transport of pollution associated with Alaska forest fires from outside the domain. The model exhibited good performance for marine or continental clear airflows from the east/north/northwest/south and southwest flows influenced only by Boston city plumes but overestimation for southeast flows influenced by the long-range transport of urban plumes from both New York City and Boston.

  14. Membrane Association of the PTEN Tumor Suppressor: Molecular Details of the Protein-Membrane Complex from SPR Binding Studies and Neutron Reflection

    PubMed Central

    Shenoy, Siddharth; Shekhar, Prabhanshu; Heinrich, Frank; Daou, Marie-Claire; Gericke, Arne; Ross, Alonzo H.; Lösche, Mathias

    2012-01-01

    The structure and function of the PTEN phosphatase is investigated by studying its membrane affinity and localization on in-plane fluid, thermally disordered synthetic membrane models. The membrane association of the protein depends strongly on membrane composition, where phosphatidylserine (PS) and phosphatidylinositol diphosphate (PI(4,5)P2) act pronouncedly synergistic in pulling the enzyme to the membrane surface. The equilibrium dissociation constants for the binding of wild type (wt) PTEN to PS and PI(4,5)P2 were determined to be Kd∼12 µM and 0.4 µM, respectively, and Kd∼50 nM if both lipids are present. Membrane affinities depend critically on membrane fluidity, which suggests multiple binding sites on the protein for PI(4,5)P2. The PTEN mutations C124S and H93R show binding affinities that deviate strongly from those measured for the wt protein. Both mutants bind PS more strongly than wt PTEN. While C124S PTEN has at least the same affinity to PI(4,5)P2 and an increased apparent affinity to PI(3,4,5)P3, due to its lack of catalytic activity, H93R PTEN shows a decreased affinity to PI(4,5)P2 and no synergy in its binding with PS and PI(4,5)P2. Neutron reflection measurements show that the PTEN phosphatase “scoots" along the membrane surface (penetration <5 Å) but binds the membrane tightly with its two major domains, the C2 and phosphatase domains, as suggested by the crystal structure. The regulatory C-terminal tail is most likely displaced from the membrane and organized on the far side of the protein, ∼60 Å away from the bilayer surface, in a rather compact structure. The combination of binding studies and neutron reflection allows us to distinguish between PTEN mutant proteins and ultimately may identify the structural features required for membrane binding and activation of PTEN. PMID:22505997

  15. Improved sensitivity and selectivity of pristine zinc oxide nanostructures to H2S gas: Detailed study on the synthesis reaction time

    NASA Astrophysics Data System (ADS)

    Motaung, David E.; Mhlongo, Gugu H.; Bolokang, Amogelang S.; Dhonge, Baban P.; Swart, Hendrik C.; Sinha Ray, Suprakas

    2016-11-01

    The gas sensing properties of ZnO nanostructures synthesized at various reaction times are reported in this study. The response of ZnO nanostructures to H2, NH3, H2S and NO2 gases was investigated at different operating temperatures and gas concentrations. Surface morphology analyses showed that the geometry of the nanostructures transforms with the synthesis reaction time. Topography analyses demonstrated a surface roughness of approximately 68.25, 70.31, 74.75 nm for the samples synthesized for 24, 48 and 72 h, respectively. The dependence of the morphology on the H2, NH3, NO2 and H2S gas sensing performance was observed. The alteration of the nanostructures diameter/geometry demonstrated a change in both the magnitude and temperature of the maximum sensor response. The 72 h ZnO sensing material revealed improved response and higher sensitivity and selectivity to H2S gas, while the 24 h sensing material revealed enhanced response and selectivity to NO2 gas at 300 °C. Moreover, the 72 h sensing material exhibited a higher sensitivity of 144.22 ppm-1 at 300 °C. These findings disclosed that by varying the synthesis reaction time, the sensing properties, such as the response, sensitivity and selectivity of the ZnO nanostructures could be tuned.

  16. Detailed analysis and follow-up studies of a high-throughput screening for indoleamine 2,3-dioxygenase 1 (IDO1) inhibitors.

    PubMed

    Röhrig, Ute F; Majjigapu, Somi Reddy; Chambon, Marc; Bron, Sylvian; Pilotte, Luc; Colau, Didier; Van den Eynde, Benoît J; Turcatti, Gerardo; Vogel, Pierre; Zoete, Vincent; Michielin, Olivier

    2014-09-12

    Indoleamine 2,3-dioxygenase 1 (IDO1) is a key regulator of immune responses and therefore an important therapeutic target for the treatment of diseases that involve pathological immune escape, such as cancer. Here, we describe a robust and sensitive high-throughput screen (HTS) for IDO1 inhibitors using the Prestwick Chemical Library of 1200 FDA-approved drugs and the Maybridge HitFinder Collection of 14,000 small molecules. Of the 60 hits selected for follow-up studies, 14 displayed IC50 values below 20 μM under the secondary assay conditions, and 4 showed an activity in cellular tests. In view of the high attrition rate we used both experimental and computational techniques to identify and to characterize compounds inhibiting IDO1 through unspecific inhibition mechanisms such as chemical reactivity, redox cycling, or aggregation. One specific IDO1 inhibitor scaffold, the imidazole antifungal agents, was chosen for rational structure-based lead optimization, which led to more soluble and smaller compounds with micromolar activity.

  17. Development of highly durable deep-ultraviolet AlGaN-based LED multichip array with hemispherical encapsulated structures using a selected resin through a detailed feasibility study

    NASA Astrophysics Data System (ADS)

    Nagai, Shoko; Yamada, Kiho; Hirano, Akira; Ippommatsu, Masamichi; Ito, Masahiro; Morishima, Naoki; Aosaki, Ko; Honda, Yoshio; Amano, Hiroshi; Akasaki, Isamu

    2016-08-01

    To replace mercury lamps with AlGaN-based deep-ultraviolet (DUV) LEDs, a simple and low-cost package with increased light extraction efficiency (LEE) is indispensable. Therefore, resin encapsulation is considered to be a key technology. However, the photochemical reactions induced by DUV light cause serious problems, and conventional resins cannot be used. In the former part of this study, a comparison of a silicone resin and fluorine polymers was carried out in terms of their suitability for encapsulation, and we concluded that only one of the fluorine polymers can be used for encapsulation. In the latter part, the endurance of encapsulation using the selected fluorine polymer was investigated, and we confirmed that the selected fluorine polymer can guarantee a lifetime of over 6,000 h at a wavelength of 265 nm. Furthermore, a 3 × 4 array module of encapsulated dies on a simple AlN submount was fabricated, demonstrating the possibility of W/cm2-class lighting.

  18. A detailed study of gold-nanoparticle loaded cells using X-ray based techniques for cell-tracking applications with single-cell sensitivity

    NASA Astrophysics Data System (ADS)

    Astolfo, Alberto; Arfelli, Fulvia; Schültke, Elisabeth; James, Simon; Mancini, Lucia; Menk, Ralf-Hendrik

    2013-03-01

    In the present study complementary high-resolution imaging techniques on different length scales are applied to elucidate a cellular loading protocol of gold nanoparticles and subsequently its impact on long term and high-resolution cell-tracking utilizing X-ray technology. Although demonstrated for malignant cell lines the results can be applied to non-malignant cell lines as well. In particular the accumulation of the gold marker per cell has been assessed quantitatively by virtue of electron microscopy, two-dimensional X-ray fluorescence imaging techniques and X-ray CT with micrometric and sub-micrometric resolution. Moreover, utilizing these techniques the three dimensional distribution of the incorporated nanoparticles, which are sequestered in lysosomes as a permanent marker, could be determined. The latter allowed elucidation of the gold partition during mitosis and the cell size, which subsequently enabled us to define the optimal instrument settings of a compact microCT system to visualize gold loaded cells. The results obtained demonstrate the feasibility of cell-tracking using X-ray CT with compact sources.

  19. Detailed analysis and follow-up studies of a high-throughput screening for indoleamine 2,3-dioxygenase 1 (IDO1) inhibitors.

    PubMed

    Röhrig, Ute F; Majjigapu, Somi Reddy; Chambon, Marc; Bron, Sylvian; Pilotte, Luc; Colau, Didier; Van den Eynde, Benoît J; Turcatti, Gerardo; Vogel, Pierre; Zoete, Vincent; Michielin, Olivier

    2014-09-12

    Indoleamine 2,3-dioxygenase 1 (IDO1) is a key regulator of immune responses and therefore an important therapeutic target for the treatment of diseases that involve pathological immune escape, such as cancer. Here, we describe a robust and sensitive high-throughput screen (HTS) for IDO1 inhibitors using the Prestwick Chemical Library of 1200 FDA-approved drugs and the Maybridge HitFinder Collection of 14,000 small molecules. Of the 60 hits selected for follow-up studies, 14 displayed IC50 values below 20 μM under the secondary assay conditions, and 4 showed an activity in cellular tests. In view of the high attrition rate we used both experimental and computational techniques to identify and to characterize compounds inhibiting IDO1 through unspecific inhibition mechanisms such as chemical reactivity, redox cycling, or aggregation. One specific IDO1 inhibitor scaffold, the imidazole antifungal agents, was chosen for rational structure-based lead optimization, which led to more soluble and smaller compounds with micromolar activity. PMID:25036789

  20. Prefrontal cortex activity during motor tasks with additional mental load requiring attentional demand: a near-infrared spectroscopy study.

    PubMed

    Mandrick, Kevin; Derosiere, Gérard; Dray, Gérard; Coulon, Denis; Micallef, Jean-Paul; Perrey, Stéphane

    2013-07-01

    Functional near-infrared spectroscopy (fNIRS) is suitable for investigating cerebral oxygenation changes during motor and/or mental tasks. In the present study, we investigated how an additional mental load during a motor task at two submaximal loadings affects the fNIRS-measured brain activation over the right prefrontal cortex (PFC). Fifteen healthy males performed isometric grasping contractions at 15% and 30% of the maximal voluntary contraction (MVC) with or without an additional mental (i.e., arithmetic) task. Mental performance, force variability, fNIRS and subjective perception responses were measured in each condition. The performance of the mental task decreased significantly while the force variability increased significantly at 30% MVC as compared to 15% MVC, suggesting that performance of dual-task required more attentional resources. PFC activity increased significantly as the effort increased from 15% to 30% MVC (p<.001). Although a larger change in the deoxyhemoglobin was observed in dual-task conditions (p=.051), PFC activity did not change significantly as compared to the motor tasks alone. In summary, participants were unable to invest more attention and effort in performing the more difficult levels in order to maintain adequate mental performance.

  1. Prefrontal cortex activity during motor tasks with additional mental load requiring attentional demand: a near-infrared spectroscopy study.

    PubMed

    Mandrick, Kevin; Derosiere, Gérard; Dray, Gérard; Coulon, Denis; Micallef, Jean-Paul; Perrey, Stéphane

    2013-07-01

    Functional near-infrared spectroscopy (fNIRS) is suitable for investigating cerebral oxygenation changes during motor and/or mental tasks. In the present study, we investigated how an additional mental load during a motor task at two submaximal loadings affects the fNIRS-measured brain activation over the right prefrontal cortex (PFC). Fifteen healthy males performed isometric grasping contractions at 15% and 30% of the maximal voluntary contraction (MVC) with or without an additional mental (i.e., arithmetic) task. Mental performance, force variability, fNIRS and subjective perception responses were measured in each condition. The performance of the mental task decreased significantly while the force variability increased significantly at 30% MVC as compared to 15% MVC, suggesting that performance of dual-task required more attentional resources. PFC activity increased significantly as the effort increased from 15% to 30% MVC (p<.001). Although a larger change in the deoxyhemoglobin was observed in dual-task conditions (p=.051), PFC activity did not change significantly as compared to the motor tasks alone. In summary, participants were unable to invest more attention and effort in performing the more difficult levels in order to maintain adequate mental performance. PMID:23665138

  2. [Study on degradation of polycyclic aromatic hydrocarbons (PAHs) with different additional carbon sources in aged contaminated soil].

    PubMed

    Yin, Chun-Qin; Jiang, Xin; Wang, Fang; Wang, Cong-Ying

    2012-02-01

    This study was conducted with different additional carbon sources (such as: glucose, DL-malic acid, citrate, urea and ammonium acetate) to elucidate the degradation of polycyclic aromatic hydrocarbons (PAHs) in aged contaminated soil under an indoor simulation experiment. The results showed that the quantity of CO2 emission in different additional carbon sources treatments was obviously much more than that of check treatment in the first week, and the quantity of CO2 emission in DL-malic acid treatment was the largest. The average CO2 production decreased in an order urea > glucose approximately citrate approximately DL-malic acid approximately ammonium acetate > check. Meanwhile, the amount of volatized PAHs in applied carbon sources treatments was significantly less than that in check treatment. The amount of three volatized PAHs decreased in an order phenanthrene > fluoranthene > benzo(b)fluoranthene. Compared with the check treatment, the average degradation rates of the three PAHs were significantly augmented in the supplied carbon sources treatments, in which rates of the three PAHs were much higher in DL-malic acid and urea treatments than those in other treatments. The largest proportion of residual was benzo(b)fluoranthene (from 72% to 81%) among three PAHs compounds, followed by fluoranthene (from 53% to 70% ) and phenanthrene (from 27% to 44%).

  3. A Thrust and Impulse Study of Guanidinium Azo-Tetrazolate as an Additive for Hybrid Rocket Fuel

    NASA Astrophysics Data System (ADS)

    Patton, J.; Wright, A. M.; Dunn, L.; Alford, B.

    2000-03-01

    A thrust and impulse study of the hybrid rocket fuel additive Guanidinium Azo-Tetrazolate (GAT) was conducted at the University of Arkansas at Little Rock (UALR) Hybrid Rocket Facility. GAT is an organic salt with a high percentage of nitrogen. GAT was mixed with the standard hybrid rocket fuel, Hydroxyl-Terminated Polybutadiene (HTPB), in the concentration of 15%, by mass. The fuel grains with the GAT additive were fired for 4 second runs with the oxygen flows of 0.05, 0.07, 0.09, and 0.12 lbm/sec. For each run average thrust, total impulse, and specific impulse were measured. Average thrust, specific impulse, and total impulse vs. oxygen flow were plotted. Similar data was collected for plain HTPB/PAPI fuels for comparison. GAT was found to increase the thrust output when it was added to the standard hybrid rocket fuel, HTPB. GAT also increased the total impulse during the run. The thrust and total impulse were increased at all flows, but especially at the lower oxygen flow rates. Specific impulse only increased during the lower oxygen flow runs, and decreased slightly for the higher oxygen flow runs.

  4. Influence of CuO and ZnO addition on the multicomponent phosphate glasses: Spectroscopic studies

    NASA Astrophysics Data System (ADS)

    Szumera, Magdalena; Wacławska, Irena; Sułowska, Justyna

    2016-06-01

    The spectra of phosphate-silicate glasses from the P2O5-SiO2-K2O-MgO-CaO system modified with the addition of CuO or ZnO have been studied by means of FTIR, Raman and 31P MAS NMR spectroscopy. All glasses were synthesized by the conventional melt-quenching technique and their homogeneous chemical composition was controlled and confirmed. By using the aforementioned research techniques, the presence of structural units with various degrees of polymerization was shown in the structure of analyzed phosphate-silicate glasses: Q3, Q2, Q1 and Q0. It was found that an increase in the content of CuO or ZnO in the composition of analyzed glasses, which are introduced at the expense of decreasing amounts of CaO and MgO, has a different influence on the phospho-oxygen network. It was shown that copper ions cause its gradual polymerization, while zinc ions cause its depolymerization. At the same time, polymerization of the silico-oxygen subnetwork was found. Additionally, in the case of glasses containing increasing amounts of ZnO, a change of the role of zinc ions in the vitreous matrix was confirmed (from the modifier to a structure-forming component).

  5. Use of retailer fidelity card schemes in the assessment of food additive intake: Sunset Yellow a case study.

    PubMed

    Sardi, M; Haldemann, Y; Nordmann, H; Bottex, B; Safford, B; Smith, B; Tennant, D; Howlett, J; Jasti, P R

    2010-11-01

    The feasibility of using a retailer fidelity card scheme to estimate food additive intake was investigated using the Swiss retailer MIGROS's Cumulus Card and the example of the food colour Sunset Yellow (E 110). Information held within the card scheme was used to identify a sample of households purchasing foods containing Sunset Yellow over a 15 day period. A sample of 1204 households was selected for interview, of which 830 households were retained in the study following interview. Interviews were conducted to establish household structure, patterns of consumption by different individuals within the household, and the proportion of foods containing Sunset Yellow habitually purchased at the retailer and/or consumed outside the home. Information provided by the retailer on levels of Sunset Yellow in the foods was combined with the information obtained at interview to calculate the per-capita intake of Sunset Yellow by members of participating households. More than 99% of consumers (n = 1902) of foods containing Sunset Yellow were estimated to consume less than 1 mg Sunset Yellow kg(-1) body weight day(-1). The method proved to be a simple and resource-efficient approach to estimate food additive intake on the basis of actual consumer behaviour and thus reports results more closely related to the actual consumption of foods by individuals.

  6. Nucleation and growth study of nano-PbO2 on Ti in different additives for electrocatalytic oxidation process.

    PubMed

    Muthuraman, G; Moon, Il-Shik

    2013-08-01

    Electrocrystallization of PbO2 on Ti electrode was studied in different bath solutions using cyclic voltammetry (CV), chronoamperometry (CA), and scanning electron microscopy. The cyclic voltammetry studies revealed that the addition of methanol postponed the oxygen evolution region and made over potential nucleation of PbO2 on Ti. Oxidation of PbO2 is preferred in second cycle (a peak) in other studied bath solutions, except the Nafion and aniline containing solution. In the presence of the pyrrole, the PbO2 formed at under deposition potential with less in numbers. Nafion and aniline inclusion turn the process in to progressive nucleation and growth without inhibition. On the other hand, other solutions studied are revealed the instantaneous nucleation and growth or inhibition at high potentials. Surface morphology explained that approximately equal to 300 nm sizes PbO2 particles with vertical nucleation and growth phenomena evidenced the Nafion and aniline are the important dopants. The results indicated that large current density or high potential polarization can be obtained in presence of methanol, Nafion, and aniline, which is one of the most important and necessary factors for forming high surface area PbO2 with strong adherence towards mediated electro-oxidation process.

  7. Detailed ab initio first-principles study of the magnetic anisotropy in a family of trigonal pyramidal iron(II) pyrrolide complexes.

    PubMed

    Atanasov, Mihail; Ganyushin, Dmitry; Pantazis, Dimitrios A; Sivalingam, Kantharuban; Neese, Frank

    2011-08-15

    A theoretical, computational, and conceptual framework for the interpretation and prediction of the magnetic anisotropy of transition metal complexes with orbitally degenerate or orbitally nearly degenerate ground states is explored. The treatment is based on complete active space self-consistent field (CASSCF) wave functions in conjunction with N-electron valence perturbation theory (NEVPT2) and quasidegenerate perturbation theory (QDPT) for treatment of magnetic field- and spin-dependent relativistic effects. The methodology is applied to a series of Fe(II) complexes in ligand fields of almost trigonal pyramidal symmetry as provided by several variants of the tris-pyrrolylmethyl amine ligand (tpa). These systems have recently attracted much attention as mononuclear single-molecule magnet (SMM) complexes. This study aims to establish how the ligand field can be fine tuned in order to maximize the magnetic anisotropy barrier. In trigonal ligand fields high-spin Fe(II) complexes adopt an orbitally degenerate (5)E ground state with strong in-state spin-orbit coupling (SOC). We study the competing effects of SOC and the (5)E⊗ε multimode Jahn-Teller effect as a function of the peripheral substituents on the tpa ligand. These subtle distortions were found to have a significant effect on the magnetic anisotropy. Using a rigorous treatment of all spin multiplets arising from the triplet and quintet states in the d(6) configuration the parameters of the effective spin-Hamiltonian (SH) approach were predicted from first principles. Being based on a nonperturbative approach we investigate under which conditions the SH approach is valid and what terms need to be retained. It is demonstrated that already tiny geometric distortions observed in the crystal structures of four structurally and magnetically well-documented systems, reported recently, i.e., [Fe(tpa(R))](-) (R = tert-butyl, Tbu (1), mesityl, Mes (2), phenyl, Ph (3), and 2,6-difluorophenyl, Dfp (4), are enough to

  8. Detailed photoluminescence studies of thin film Cu{sub 2}S for determination of quasi-Fermi level splitting and defect levels

    SciTech Connect

    Sträter, H. Brüggemann, R.; Bauer, G. H.; Siol, S.; Klein, A.; Jaegermann, W.

    2013-12-21

    We have studied chalcocite (Cu{sub 2}S) layers prepared by physical vapor deposition with varying deposition parameters by calibrated spectral photoluminescence (PL) and by confocal PL with lateral resolution of Δ x≈0.9 μm. Calibrated PL experiments as a function of temperature T and excitation fluxes were performed to obtain the absolute PL-yield and to calculate the splitting of the quasi-Fermi levels (QFLs) μ=E{sub f,n}−E{sub f,p} at an excitation flux equivalent to the AM 1.5 spectrum and the absorption coefficient α(ℏω), both in the temperature range of 20 K≤T≤400 K. The PL-spectra reveal two peaks at E{sub #1}=1.17 eV and E{sub #2}=1.3 eV. The samples show a QFL-splitting of μ>700 meV associated with a pseudo band gap of E{sub g}=1.25 eV. The high-energy peak shows an unexpected temperature behavior, namely, an increase of PL-yield with rising temperature at variance with the behavior of QFL-splitting that decreases with rising T. Our observations indicate that, contrary to common believe, it is not the PL-yield, but rather the QFL-splitting that is the comprehensive indicator of the quality of the excited state in an illuminated semiconductor. A further examination of the lateral variation of opto-electronic properties by confocal PL and the surface contour shows no detectable correlation between Cu{sub 2}S grains/grain boundaries and the PL-yield or QFL-splitting.

  9. A Comparative Evaluation of Dimensional Accuracy and Surface Detail Reproduction of Four Hydrophilic Vinyl Polysiloxane Impression Materials Tested Under Dry, Moist, and Wet Conditions-An In Vitro Study.

    PubMed

    Nagrath, Rahul; Lahori, Manesh; Agrawal, Manjari

    2014-12-01

    Vinyl polysiloxane (VPS) impression materials have application in a wide variety of situations in both fixed and removable prosthodontics. A major limitation of VPS impression materials is their hydrophobicity. There are two aspects of this problem, the wettability of the polymerized impression by dental gypsum materials and the ability of the unpolymerized material to wet intraoral tissues. To address this problem, manufacturers have added surfactants and labelled these new products as "hydrophilic vinyl polysiloxane." The purpose of this study was to evaluate and compare dimensional accuracy and surface detail reproduction of four hydrophilic VPS impression materials, when used under dry, moist, and wet conditions. A total of 180 samples were made of stainless steel die similar to as described in ADA sp. no. 19. The die was scored with three horizontal and two vertical lines. Impressions were made under dry, moist and wet conditions. Dimensional accuracy was measured by comparing the length of the middle horizontal line in each impression to the same line on the metal die, by using Universal Length Measuring machine. A 2-way ANOVA was performed on the percentage change data for measured lengths of the 4 impression materials under the 3 conditions to evaluate dimensional accuracy. Surface detail was evaluated in two ways: (1) by use of criteria similar to ADA sp. no. 19 for detail reproduction, and (2) by use of a method that categorized the impressions as satisfactory or unsatisfactory based on their surface characteristics: presence of pits, voids, or roughness. Pearson X2 (α = 0.05) was used to compare surface detail reproduction results. Conditions (dry, moist, and wet) did not cause significant adverse effects on the dimensional accuracy of all the four material. With both surface detail analyses, dry, moist, and wet conditions had a significant effect on the detail reproduction of all the four materials (P < 0.05). The study concluded that the

  10. White tea as a promising antioxidant medium additive for sperm storage at room temperature: a comparative study with green tea.

    PubMed

    Dias, Tânia R; Alves, Marco G; Tomás, Gonçalo D; Socorro, Sílvia; Silva, Branca M; Oliveira, Pedro F

    2014-01-22

    Storage of sperm under refrigeration reduces its viability, due to oxidative unbalance. Unfermented teas present high levels of catechin derivatives, known to reduce oxidative stress. This study investigated the effect of white tea (WTEA) on epididymal spermatozoa survival at room temperature (RT), using green tea (GTEA) for comparative purposes. The chemical profiles of WTEA and GTEA aqueous extracts were evaluated by (1)H NMR. (-)-Epigallocatechin-3-gallate was the most abundant catechin, being twice as abundant in WTEA extract. The antioxidant power of storage media was evaluated. Spermatozoa antioxidant potential, lipid peroxidation, and viability were assessed. The media antioxidant potential increased the most with WTEA supplementation, which was concomitant with the highest increase in sperm antioxidant potential and lipid peroxidation decrease. WTEA supplementation restored spermatozoa viability to values similar to those obtained at collection time. These findings provide evidence that WTEA extract is an excellent media additive for RT sperm storage, to facilitate transport and avoid the deleterious effects of refrigeration.

  11. Study on the performance of polycarboxylate-based superplasticizers synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization

    NASA Astrophysics Data System (ADS)

    Yu, Binbin; Zeng, Zhong; Ren, Qinyu; Chen, Yang; Liang, Mei; Zou, Huawei

    2016-09-01

    A series of block type polycarboxylate-based superplasticizers (PCs) with different molecular architectures were synthesized with macromonomer butenyl alkylene polyoxyethylene-polyoxypropylene ether (BAPP) and acrylic acid (AA) by reversible addition-fragmentation chain transfer (RAFT) polymerization. Fourier-Transformed Infrared (FTIR) Spectroscopy and dynamic light scattering (DLS) were applied to investigate the PCs' molecular structure. The dispersion capacity of the PCs in cement were also measured, and the results showed that the polycarboxylic dispersing agents prepared by this method were suitable for portlant cement. It was found that the PCs could affect the hydration process, which was performed through retarding the generation of ettringite in the hydrated product. Our studies with X-ray diffraction (XRD), scanning electron microscopy (SEM) and compressive strength measurement of hydrated production were all supporting this conclusion.

  12. Study on Antiwear and Repairing Performances about Mass of Nano-copper Lubricating Additives to 45 Steel

    NASA Astrophysics Data System (ADS)

    Wang, X. L.; Yin, Y. L.; Zhang, G. N.; Wang, W. Y.; Zhao, K. K.

    Nano-copper usually serve for lubricating additives in tribology field. The antiwear and reducing friction performances both basic lubrication oil and basic lubrication oil with nano-copper in different mass were tested by friction wear test machine. The morphologies and the main elements of worn surfaces were analyzed by SEM. The results indicated that nano-copper could improve tribology performances of basic lubrication oil. Comparing with base lubrication oil, the mass is 0.15% of nano-copper, the friction coefficient and the worn trace width can be reduced 34% and 32% respectively. Nano-copper can form self-repairing film in lubrication oil which availably separates the friction materials in friction process. Therefore, nano-copper has wonderful antiwear, reducing friction and self-repairing performances. And the function mechanism of Cu nanoparticles is studied in the paper.

  13. Linearity and additivity in cluster-induced sputtering: A molecular-dynamics study of van der Waals bonded systems

    SciTech Connect

    Anders, Christian; Urbassek, Herbert M.; Johnson, Robert E.

    2004-10-15

    Using molecular-dynamics simulation, we study sputtering of a condensed-gas solid induced by the impact of atomic clusters with sizes 1{<=}n{<=}10{sup 4}. Above a nonlinear onset regime, we find a linear increase of the sputter yield Y with the total energy E of the bombarding cluster. The fitting coefficients in the linear regime depend only on the cluster size n such that for fixed bombardment energy, sputtering decreases with increasing cluster size n. We find that to a good approximation the sputter yield in this regime obeys an additivity rule in cluster size n such that doubling the cluster size at the same cluster velocity amounts to doubling the sputter yield. The sputter-limiting energy {epsilon}{sub s} is introduced which separates erosion ({epsilon}>{epsilon}{sub s}) from growth ({epsilon}<{epsilon}{sub s}) under cluster impact.

  14. White tea as a promising antioxidant medium additive for sperm storage at room temperature: a comparative study with green tea.

    PubMed

    Dias, Tânia R; Alves, Marco G; Tomás, Gonçalo D; Socorro, Sílvia; Silva, Branca M; Oliveira, Pedro F

    2014-01-22

    Storage of sperm under refrigeration reduces its viability, due to oxidative unbalance. Unfermented teas present high levels of catechin derivatives, known to reduce oxidative stress. This study investigated the effect of white tea (WTEA) on epididymal spermatozoa survival at room temperature (RT), using green tea (GTEA) for comparative purposes. The chemical profiles of WTEA and GTEA aqueous extracts were evaluated by (1)H NMR. (-)-Epigallocatechin-3-gallate was the most abundant catechin, being twice as abundant in WTEA extract. The antioxidant power of storage media was evaluated. Spermatozoa antioxidant potential, lipid peroxidation, and viability were assessed. The media antioxidant potential increased the most with WTEA supplementation, which was concomitant with the highest increase in sperm antioxidant potential and lipid peroxidation decrease. WTEA supplementation restored spermatozoa viability to values similar to those obtained at collection time. These findings provide evidence that WTEA extract is an excellent media additive for RT sperm storage, to facilitate transport and avoid the deleterious effects of refrigeration. PMID:24372402

  15. A detailed study of the main sequence of the globular cluster NGC 6397: can we derive constraints on the existence of multiple populations?

    NASA Astrophysics Data System (ADS)

    di Criscienzo, M.; D'Antona, F.; Ventura, P.

    2010-02-01

    best distance modulus for each age. For a population all made by stars with standard helium Y=0.24, standard CNO abundances, and an age of 12 Gyr, choosing a double power law mass function ∝M-0.7 for M > 0.18 M⊙ and ∝M-0.9 for M<0.18 M⊙, the resulting theoretical luminosity function agrees well with the observed one (KS ~ 0.75 for a distance modulus (m-M)F814W = 12.31 ± 0.05 mag). Using non-standard CNO abundance for all the stars or for a fraction of 70%, the KS test provides comparable agreement (~KS > 0.55) with the observed luminosity function. Conclusions: The study of the width of the main sequence at a different interval of magnitude is consistent with the hypothesis that both generations are present in the cluster. If the CNO increase suggested by spectroscopic observation is taken into account the small helium spread of the main sequence in NGC 6397 implies a substantial helium uniformity (Δ Y ~ 0.02) between first and second generation stars. The possible spread in helium doubles if an higher larger increase of CNO is considered. The luminosity function is in any case well consistent with the observed data.

  16. Theoretical study of the hydroxyl radical addition to uracil and photochemistry of the formed U6OH• adduct.

    PubMed

    Francés-Monerris, Antonio; Merchán, Manuela; Roca-Sanjuán, Daniel

    2014-03-20

    Hydroxyl radical ((•)OH) is produced in biological systems by external or endogenous agents. It can damage DNA/RNA by attacking pyrimidine nucleobases through the addition to the C5═C6 double bond. The adduct resulting from the attachment at the C5 position prevails in the experimental measurements, although the reasons for this preference remain unclear. The first aim of this work is therefore to shed light on the comprehension of this important process. Thus, the thermal (•)OH addition to the C5═C6 double bond of uracil has been studied theoretically by using DFT, MP2, and the multiconfigurational CASPT2//CASSCF methodologies. The in-vacuo results obtained with the latter protocol plus the analysis of solvent effects support the experimental observation. A significant lower barrier height is predicted for the C5 pathway with respect to that of the C6 route. In contrast to the C5 adduct, the C6 adduct is able to absorb visible light. Hence, the second aim of the work is to study the photochemistry of this species using the CASPT2//CASSCF methodology within the framework of the photochemical reaction path approach (PRPA). The nonradiative decay to the ground state of this compound has been characterized. A photoreactive character is predicted for the C6 adduct in the excited states according to the presence of excited-state minima along the main decay channel. Finally, a new mechanism of photodissociation has been explored, which implies the photoinduced regeneration of the canonical nucleobase by irradiating with visible light, being therefore relevant in RNA protection against damage by reactive oxygen species.

  17. Origins of stereoselectivity in the Diels-Alder addition of chiral hydroxyalkyl vinyl ketones to cyclopentadiene: a quantitative computational study.

    PubMed

    Bakalova, Snezhana M; Kaneti, Jose

    2008-12-18

    Modest basis set level MP2/6-31G(d,p) calculations on the Diels-Alder addition of S-1-alkyl-1-hydroxy-but-3-en-2-ones (1-hydroxy-1-alkyl methyl vinyl ketones) to cyclopentadiene correctly reproduce the trends in known experimental endo/exo and diastereoface selectivity. B3LYP theoretical results at the same or significantly higher basis set level, on the other hand, do not satisfactorily model observed endo/exo selectivities and are thus unsuitable for quantitative studies. The same is valid also with regard to subtle effects originating from, for example, conformational distributions of reactants. The latter shortcomings are not alleviated by the fact that observed diastereoface selectivities are well-reproduced by DFT calculations. Quantitative computational studies of large cycloaddition systems would require higher basis sets and better account for electron correlation than MP2, such as, for example, CCSD. Presently, however, with 30 or more non-hydrogen atoms, these computations are hardly feasible. We present quantitatively correct stereochemical predictions using a hybrid layered ONIOM computational approach, including the chiral carbon atom and the intramolecular hydrogen bond into a higher level, MP2/6-311G(d,p) or CCSD/6-311G(d,p), layer. Significant computational economy is achieved by taking account of surrounding bulky (alkyl) residues at 6-31G(d) in a low HF theoretical level layer. We conclude that theoretical calculations based on explicit correlated MO treatment of the reaction site are sufficiently reliable for the prediction of both endo/exo and diastereoface selectivity of Diels-Alder addition reactions. This is in line with the understanding of endo/exo selectivity originating from dynamic electron correlation effects of interacting pi fragments and diastereofacial selectivity originating from steric interactions of fragments outside of the Diels-Alder reaction site. PMID:18637663

  18. In situ electron microscopy studies of calcium carbonate precipitation from aqueous solution with and without organic additives.

    PubMed

    Verch, Andreas; Morrison, Ian E G; Locht, Renee van de; Kröger, Roland

    2013-08-01

    For the understanding of mineral formation processes from solution it is important to obtain a deeper insight into the dynamics of crystal growth. In this study we applied for this purpose a novel atmospheric scanning electron microscope that allows the investigation of CaCO3 particle formation in solution under atmospheric conditions with a resolution of approximately 10nm. Furthermore it permits the in situ observation of the dynamics of crystal evolution. With this tool the precipitation of CaCO3 was studied in the absence and presence of additives, namely poly(acrylic acid) and poly(styrene sulfonate-co-maleic acid) which are known to influence the crystal growth rate and morphology. We determined particle growth rates and investigated the formation and dissolution dynamics of an observed transient phase, believed to be amorphous calcium carbonate. This technique also enabled us to study the depletion zones, areas of lower intensity due to reduced ion concentrations. Ion flux rates were obtained from the depletion zone width, which amounted to several μm assuming the formation and dissolution dynamics of amorphous calcium carbonate being the rate determining process. This assumption was confirmed since the obtained fluxes were found to be in good agreement with fluxes derived from the experimentally observed crystal growth rates.

  19. Detailed Conversion Electron Study of 110Cd

    NASA Astrophysics Data System (ADS)

    Jigmeddorj, B.; Garrett, P. E.; Diaz Varela, A.; Ball, G. C.; Bangay, J. C.; Cross, D. S.; Demand, G. A.; Garnsworthy, A. B.; Green, K. L.; Leach, K. G.; Kulp, W. D.; Rand, E. T.; Sumithrarachchi, C.; Svensson, C. E.; Triambak, S.; Wong, J.; Wood, J. L.; Yates, S. W.

    Conversion electron and γ-ray data following the β+/EC decay of 110Inm have been collected using the 8π spectrometer in conjunction with the PACES array of 5 Si(Li) detectors at the TRIUMF-ISAC facility. The high-statistics data set enabled the observation of very weak γ-ray branches, and through γ - e- coincidences, the extraction of K-shell conversion coefficients for 20 transitions. The extracted conversion coefficients are in good agreement with their expected theoretical values except for ΔI = 0 transitions at 397- and 708-keV, which are the candidates for new E0 branches. The effects of the opening angles between the Si and Ge detectors on the backgrounds are explored.

  20. Detailed studies of aviation fuel flowability

    NASA Technical Reports Server (NTRS)

    Mehta, H. K.; Armstrong, R. S.

    1985-01-01

    Six Jet A fuels, with varying compositions, were tested for low temperature flowability in a 190-liter simulator tank that modeled a section of a wing tank of a wide-body commercial airplane. The insulated tank was chilled by circulating coolant through the upper and lower surfaces. Flow-ability was determined as a function of fuel temperature by holdup, the fraction of unflowable fuel remaining in the tank after otherwise complete withdrawal. In static tests with subfreezing tank conditions, hold up varied with temperature and fuel composition. However, a general correlation of two or three classes of fuel type was obtained by plotting holdup as a function of the difference between freezing point and boundary-layer temperature, measured 0.6 cm above the bottom tank surface. Dynamic conditions of vibrations and slosh or rate of fuel withdrawal had very minor effects on holdup. Tests with cooling schedules to represent extreme, cold-day flights showed, at most, slight holdup for any combination of fuel type or dynamic conditions. Tests that superimposed external fuel heating and recirculation during the cooldown period indicates reduced hold up by modification of the low-temperature boundary layer. Fuel heating was just as effective when initiated during the later times of the tests as when applied continuously.