Science.gov

Sample records for addition energy transfer

  1. Evidence of additional excitation energy transfer pathways in the phycobiliprotein antenna system of Acaryochloris marina.

    PubMed

    Nganou, A C; David, L; Adir, N; Pouhe, D; Deen, M J; Mkandawire, M

    2015-02-01

    To improve the energy conversion efficiency of solar organic cells, the clue may lie in the development of devices inspired by an efficient light harvesting mechanism of some aquatic photosynthetic microorganisms that are adapted to low light intensity. Consequently, we investigated the pathways of excitation energy transfer (EET) from successive light harvesting pigments to the low energy level inside the phycobiliprotein antenna system of Acaryochloris marina, a cyanobacterium, using a time resolved absorption difference spectroscopy with a resolution time of 200 fs. The objective was to understand the actual biochemical process and pathways that determine the EET mechanism. Anisotropy of the EET pathway was calculated from the absorption change trace in order to determine the contribution of excitonic coupling. The results reveal a new electron energy relaxation pathway of 14 ps inside the phycocyanin component, which runs from phycocyanin to the terminal emitter. The bleaching of the 660 nm band suggests a broader absorption of the terminal emitter between 660 nm and 675 nm. Further, there are trimer depolarization kinetics of 450 fs and 500 fs in high and low ionic strength, respectively, which arise from the relaxation of the β84 and α84 in adjacent monomers of phycocyanin. Under conditions of low ionic strength buffer solution, the evolution of the kinetic amplitude during the depolarization of the trimer is suggestive of trimer conservation within the phycocyanin hexamer. The anisotropy values were 0.38 and 0.40 in high and in low ionic strength, respectively, indicating that there is no excitonic delocalization in the high energy level of phycocyanin hexamers.

  2. Solvation free energy of the peptide group: its model dependence and implications for the additive-transfer free-energy model of protein stability.

    PubMed

    Tomar, Dheeraj S; Asthagiri, D; Weber, Valéry

    2013-09-17

    The group-additive decomposition of the unfolding free energy of a protein in an osmolyte solution relative to that in water poses a fundamental paradox: whereas the decomposition describes the experimental results rather well, theory suggests that a group-additive decomposition of free energies is, in general, not valid. In a step toward resolving this paradox, here we study the peptide-group transfer free energy. We calculate the vacuum-to-solvent (solvation) free energies of (Gly)n and cyclic diglycine (cGG) and analyze the data according to experimental protocol. The solvation free energies of (Gly)n are linear in n, suggesting group additivity. However, the slope interpreted as the free energy of a peptide unit differs from that for cGG scaled by a factor of half, emphasizing the context dependence of solvation. However, the water-to-osmolyte transfer free energies of the peptide unit are relatively independent of the peptide model, as observed experimentally. To understand these observations, a way to assess the contribution to the solvation free energy of solvent-mediated correlation between distinct groups is developed. We show that linearity of solvation free energy with n is a consequence of uniformity of the correlation contributions, with apparent group-additive behavior in the water-to-osmolyte transfer arising due to their cancellation. Implications for inferring molecular mechanisms of solvent effects on protein stability on the basis of the group-additive transfer model are suggested.

  3. Addition of lipid to the photosynthetic membrane: effects on membrane structure and energy transfer

    PubMed Central

    1981-01-01

    We have carried out a series of experiments in which the lipid composition of the photosynthetic membrane has been altered by the addition of lipid from a defined source under experimental conditions. Liposomes prepared by sonication are mixed with purified photosynthetic membranes obtained from spinach chloroplasts and are taken through cycles of freezing and thawing. Several lines of evidence, including gel electrophoresis and freeze-fracture electron microscopy, indicate that an actual addition of lipid has taken place. Structural analysis by freeze-fracture shows that intramembrane particles are widely separated after the addition of large amounts of lipid, with one exception: large hexagonal lattices of particles appear in some regions of the membrane. These lattices are identical in appearance with lattices formed from a single purified component of the membrane known as chlorophyll-protein complex II. The suggestion that the presence of such lattices in lipid-enriched membranes reflects a profound rearrangement of photosynthetic structures has been confirmed by analysis of the fluorescence emission spectra of natural and lipid- enriched membranes. Specifically, lipid addition in each of the cases we have studied results in the apparent detachment of chlorophyll- protein complex II from photosynthetic reaction centers. It is concluded that specific arrangements of components in the photosynthetic membrane, necessary for the normal functioning of the membrane in the light reaction of photosynthesis, can be regulated to a large extent by the lipid content of the membrane. PMID:7298712

  4. Additional correction for energy transfer efficiency calculation in filter-based Förster resonance energy transfer microscopy for more accurate results

    NASA Astrophysics Data System (ADS)

    Sun, Yuansheng; Periasamy, Ammasi

    2010-03-01

    Förster resonance energy transfer (FRET) microscopy is commonly used to monitor protein interactions with filter-based imaging systems, which require spectral bleedthrough (or cross talk) correction to accurately measure energy transfer efficiency (E). The double-label (donor+acceptor) specimen is excited with the donor wavelength, the acceptor emission provided the uncorrected FRET signal and the donor emission (the donor channel) represents the quenched donor (qD), the basis for the E calculation. Our results indicate this is not the most accurate determination of the quenched donor signal as it fails to consider the donor spectral bleedthrough (DSBT) signals in the qD for the E calculation, which our new model addresses, leading to a more accurate E result. This refinement improves E comparisons made with lifetime and spectral FRET imaging microscopy as shown here using several genetic (FRET standard) constructs, where cerulean and venus fluorescent proteins are tethered by different amino acid linkers.

  5. Backbone Additivity in the Transfer Model of Protein Solvation

    SciTech Connect

    Hu, Char Y.; Kokubo, Hironori; Lynch, Gillian C.; Bolen, D Wayne; Pettitt, Bernard M.

    2010-05-01

    The transfer model implying additivity of the peptide backbone free energy of transfer is computationally tested. Molecular dynamics simulations are used to determine the extent of change in transfer free energy (ΔGtr) with increase in chain length of oligoglycine with capped end groups. Solvation free energies of oligoglycine models of varying lengths in pure water and in the osmolyte solutions, 2M urea and 2M trimethylamine N-oxide (TMAO), were calculated from simulations of all atom models, and ΔGtr values for peptide backbone transfer from water to the osmolyte solutions were determined. The results show that the transfer free energies change linearly with increasing chain length, demonstrating the principle of additivity, and provide values in reasonable agreement with experiment. The peptide backbone transfer free energy contributions arise from van der Waals interactions in the case of transfer to urea, but from electrostatics on transfer to TMAO solution. The simulations used here allow for the calculation of the solvation and transfer free energy of longer oligoglycine models to be evaluated than is currently possible through experiment. The peptide backbone unit computed transfer free energy of –54 cal/mol/Mcompares quite favorably with –43 cal/mol/M determined experimentally.

  6. The recovery of the polymerizability of Lys-61-labelled actin by the addition of phalloidin. Fluorescence polarization and resonance-energy-transfer measurements.

    PubMed

    Miki, M

    1987-04-01

    Modification of Lys-61 in actin with fluorescein-5-isothiocyanate (FITC) blocks actin polymerization [Burtnick, L. D. (1984) Biochim. Biophys. Acta 791, 57-62]. FITC-labelled actin recovered its ability to polymerize on addition of phalloidin. The polymers had the same characteristic helical thread-like structure as normal F-actin and the addition of myosin subfragment-1 to the polymers formed the characteristic arrowhead structure in electron microscopy. The polymers activated the ATPase activity of myosin subfragment-1 as efficiently as normal F-actin. These results indicate that Lys-61 is not directly involved in an actin-actin binding region nor in myosin binding site. From static fluorescence polarization measurements, the rotational relaxation time of FITC-labelled actin filaments was calculated to be 20 ns as the value reduced in water at 20 degrees C, while any rotational relaxation time of 1,5-IAEDANS bound to Cys-374 on F-actin in the presence of a twofold molar excess of phalloidin could not be detected by static polarization measurements under the same conditions. This indicates that the Lys-61 side chain is extremely mobile even in the filamentous structure. Fluorescence resonance energy transfer between the donor 1,5-IAEDANS bound to SH1 of myosin subfragment-1 and the acceptor fluorescein-5-isothiocyanate bound to Lys-61 of actin in the rigor complex was measured. The transfer efficiency was 0.39 +/- 0.05 which corresponds to the distance of 5.2 +/- 0.1 nm, assuming that the energy donor and acceptor rotate rapidly relative to the fluorescence lifetime and that the transfer occurs between a single donor and an acceptor.

  7. Solar Energy: Heat Transfer.

    ERIC Educational Resources Information Center

    Knapp, Henry H., III

    This module on heat transfer is one of six in a series intended for use as supplements to currently available materials on solar energy and energy conservation. Together with the recommended texts and references (sources are identified), these modules provide an effective introduction to energy conservation and solar energy technologies. The…

  8. Dexter energy transfer pathways.

    PubMed

    Skourtis, Spiros S; Liu, Chaoren; Antoniou, Panayiotis; Virshup, Aaron M; Beratan, David N

    2016-07-19

    Energy transfer with an associated spin change of the donor and acceptor, Dexter energy transfer, is critically important in solar energy harvesting assemblies, damage protection schemes of photobiology, and organometallic opto-electronic materials. Dexter transfer between chemically linked donors and acceptors is bridge mediated, presenting an enticing analogy with bridge-mediated electron and hole transfer. However, Dexter coupling pathways must convey both an electron and a hole from donor to acceptor, and this adds considerable richness to the mediation process. We dissect the bridge-mediated Dexter coupling mechanisms and formulate a theory for triplet energy transfer coupling pathways. Virtual donor-acceptor charge-transfer exciton intermediates dominate at shorter distances or higher tunneling energy gaps, whereas virtual intermediates with an electron and a hole both on the bridge (virtual bridge excitons) dominate for longer distances or lower energy gaps. The effects of virtual bridge excitons were neglected in earlier treatments. The two-particle pathway framework developed here shows how Dexter energy-transfer rates depend on donor, bridge, and acceptor energetics, as well as on orbital symmetry and quantum interference among pathways.

  9. Luminescence resonance energy transfer

    SciTech Connect

    Selvin, P.R.; Rana, T.M.; Hearst, J.E. Lawrence Berkeley Lab., CA )

    1994-06-29

    Fluorescence resonance energy transfer (FRET), in which a fluorescent donor molecule transfers energy via a nonradiative dipole-dipole interaction to an acceptor molecule (which is usually a fluorescent molecule), is a standard spectroscopic technique for measuring distances in the 10-70 Angstrom range. We have used a luminescent europium chelate as donor and an organic dye, CY-5, as acceptor. This luminescence resonance energy transfer (LRET) has several advantages over the more conventional FRET. The distance at which 50% of the energy is transferred (R[sub 0]) is large, 70 [angstrom]; the donor lifetime is single exponential and long (0.63 ms in H[sub 2]O; 2.5 ms in D[sub 2]O), making lifetime measurements facile and highly accurate; the orientation dependence (k[sup 2]) of energy transfer is minimized by the donor's multiple electronic transitions and long lifetime, limiting uncertainty in the measured distance due to orientation effects to [+-]12% in the worst case; the sensitized emission of the acceptor can be measured with little or no interfering background, yielding a >50-fold improvement in signal to background over standard donor-acceptor pairs and enabling distances several times R[sub 0] to be measured. 13 refs., 4 figs.

  10. Energy Transfer in Rotating Turbulence

    NASA Technical Reports Server (NTRS)

    Cambon, Claude; Mansour, Nagi N.; Godeferd, Fabien S.; Rai, Man Mohan (Technical Monitor)

    1995-01-01

    The influence or rotation on the spectral energy transfer of homogeneous turbulence is investigated in this paper. Given the fact that linear dynamics, e.g. the inertial waves regime tackled in an RDT (Rapid Distortion Theory) fashion, cannot Affect st homogeneous isotropic turbulent flow, the study of nonlinear dynamics is of prime importance in the case of rotating flows. Previous theoretical (including both weakly nonlinear and EDQNM theories), experimental and DNS (Direct Numerical Simulation) results are gathered here and compared in order to give a self-consistent picture of the nonlinear effects of rotation on tile turbulence. The inhibition of the energy cascade, which is linked to a reduction of the dissipation rate, is shown to be related to a damping due to rotation of the energy transfer. A model for this effect is quantified by a model equation for the derivative-skewness factor, which only involves a micro-Rossby number Ro(sup omega) = omega'/(2(OMEGA))-ratio of rms vorticity and background vorticity as the relevant rotation parameter, in accordance with DNS and EDQNM results fit addition, anisotropy is shown also to develop through nonlinear interactions modified by rotation, in an intermediate range of Rossby numbers (Ro(omega) = (omega)' and Ro(omega)w greater than 1), which is characterized by a marco-Rossby number Ro(sup L) less than 1 and Ro(omega) greater than 1 which is characterized by a macro-Rossby number based on an integral lengthscale L and the micro-Rossby number previously defined. This anisotropy is mainly an angular drain of spectral energy which tends to concentrate energy in tile wave-plane normal to the rotation axis, which is exactly both the slow and the two-dimensional manifold. In Addition, a polarization of the energy distribution in this slow 2D manifold enhances horizontal (normal to the rotation axis) velocity components, and underlies the anisotropic structure of the integral lengthscales. Finally is demonstrated the

  11. Energy transfer in compressible turbulence

    NASA Technical Reports Server (NTRS)

    Bataille, Francoise; Zhou, YE; Bertoglio, Jean-Pierre

    1995-01-01

    This letter investigates the compressible energy transfer process. We extend a methodology developed originally for incompressible turbulence and use databases from numerical simulations of a weak compressible turbulence based on Eddy-Damped-Quasi-Normal-Markovian (EDQNM) closure. In order to analyze the compressible mode directly, the well known Helmholtz decomposition is used. While the compressible component has very little influence on the solenoidal part, we found that almost all of the compressible turbulence energy is received from its solenoidal counterpart. We focus on the most fundamental building block of the energy transfer process, the triadic interactions. This analysis leads us to conclude that, at low turbulent Mach number, the compressible energy transfer process is dominated by a local radiative transfer (absorption) in both inertial and energy containing ranges.

  12. Replacing and Additive Horizontal Gene Transfer in Streptococcus

    PubMed Central

    Choi, Sang Chul; Rasmussen, Matthew D.; Hubisz, Melissa J.; Gronau, Ilan; Stanhope, Michael J.; Siepel, Adam

    2012-01-01

    The prominent role of Horizontal Gene Transfer (HGT) in the evolution of bacteria is now well documented, but few studies have differentiated between evolutionary events that predominantly cause genes in one lineage to be replaced by homologs from another lineage (“replacing HGT”) and events that result in the addition of substantial new genomic material (“additive HGT”). Here in, we make use of the distinct phylogenetic signatures of replacing and additive HGTs in a genome-wide study of the important human pathogen Streptococcus pyogenes (SPY) and its close relatives S. dysgalactiae subspecies equisimilis (SDE) and S. dysgalactiae subspecies dysgalactiae (SDD). Using recently developed statistical models and computational methods, we find evidence for abundant gene flow of both kinds within each of the SPY and SDE clades and of reduced levels of exchange between SPY and SDD. In addition, our analysis strongly supports a pronounced asymmetry in SPY–SDE gene flow, favoring the SPY-to-SDE direction. This finding is of particular interest in light of the recent increase in virulence of pathogenic SDE. We find much stronger evidence for SPY–SDE gene flow among replacing than among additive transfers, suggesting a primary influence from homologous recombination between co-occurring SPY and SDE cells in human hosts. Putative virulence genes are correlated with transfer events, but this correlation is found to be driven by additive, not replacing, HGTs. The genes affected by additive HGTs are enriched for functions having to do with transposition, recombination, and DNA integration, consistent with previous findings, whereas replacing HGTs seen to influence a more diverse set of genes. Additive transfers are also found to be associated with evidence of positive selection. These findings shed new light on the manner in which HGT has shaped pathogenic bacterial genomes. PMID:22617954

  13. Energy transfer processes in solar energy conversion

    SciTech Connect

    Fayer, M.D.

    1988-01-01

    The program involves the investigation of excitation transport and electron transfer in complex systems. In the area of electron transfer, we have been studying electron back transfer following donor-acceptor photoinduced electron transfer. We are addressing this problem both theoretically and experimentally. In the area of excitation transport, we have been examining transport in solid solutions, liquid solutions, and in clustered excitation transport systems. Again, we are pursuing both experimental and theoretical approaches. The problem of electron back transfer between photogenerated ions is of central importance in both artificial and biological solar energy conversion. Once an electron has been transferred from an optically excited donor to an acceptor, back transfer competes with the ability of the radical ions to go on to do useful chemistry. We are studying the back transfer process using picosecond transient grating experiments in conjunction with time resolved and steady state fluorescence quenching measurements. The transient grating experiments makes the back transfer process a direct experimental observable, while the fluorescence experiments allow the forward transfer to be examined. By combining the experiments, a complete picture emerges. 10 refs.

  14. Energy transfer processes in solar energy conversion

    SciTech Connect

    Fayer, M.D.

    1986-11-01

    By combining picosecond optical experiments and detailed statistical mechanics theory we continue to increase our understanding of the complex interplay of structure and dynamics in important energy transfer situations. A number of different types of problems will be focused on experimentally and theoretically. They are excitation transport among chromophores attached to finite size polymer coils; excitation transport among chromophores in monolayers, bilayers, and finite and infinite stacks of layers; excitation transport in large vesicle systems; and photoinduced electron transfer in glasses and liquids, focusing particularly on the back transfer of the electron from the photogenerated radical anion to the radical cation. 33 refs., 13 figs.

  15. Optimal Low Energy Earth-Moon Transfers

    NASA Technical Reports Server (NTRS)

    Griesemer, Paul Ricord; Ocampo, Cesar; Cooley, D. S.

    2010-01-01

    The optimality of a low-energy Earth-Moon transfer is examined for the first time using primer vector theory. An optimal control problem is formed with the following free variables: the location, time, and magnitude of the transfer insertion burn, and the transfer time. A constraint is placed on the initial state of the spacecraft to bind it to a given initial orbit around a first body, and on the final state of the spacecraft to limit its Keplerian energy with respect to a second body. Optimal transfers in the system are shown to meet certain conditions placed on the primer vector and its time derivative. A two point boundary value problem containing these necessary conditions is created for use in targeting optimal transfers. The two point boundary value problem is then applied to the ballistic lunar capture problem, and an optimal trajectory is shown. Additionally, the ballistic lunar capture trajectory is examined to determine whether one or more additional impulses may improve on the cost of the transfer.

  16. Energy transfer processes in solar energy conversion

    SciTech Connect

    Fayer, M.D.

    1989-11-01

    We have made substantial progress in experimental and theoretical studies in two areas: Photoinduced donor to acceptor electron transfer followed by back transfer in random solutions; and electronic excitation transport in systems with complex inhomogeneous spatial geometries and inhomogeneous energy distributions. Through the development of accurate statistical mechanical theories, we have been able to relate dynamics in complex systems to experimental observables. We have then used the experimental observables, time resolved fluorescence depolarization and transient grating experiments, to examine well defined molecular systems. The agreement between theory and experiment is excellent. 11 refs.

  17. 'Green' reversible addition-fragmentation chain-transfer (RAFT) polymerization

    NASA Astrophysics Data System (ADS)

    Semsarilar, Mona; Perrier, Sébastien

    2010-10-01

    Reversible addition-fragmentation chain-transfer (RAFT) polymerization has revolutionized the field of polymer synthesis as a versatile tool for the production of complex polymeric architectures. As for all chemical processes, research and development in RAFT have to focus on the design and application of chemical products and processes that have a minimum environmental impact, and follow the principles of 'green' chemistry. In this Review, we summarize some of the green features of the RAFT process, and review the recent advances in the production of degradable polymers obtained from RAFT polymerization. Its use to modify biodegradable and renewable inorganic and organic materials to yield more functional products with enhanced applications is also covered. RAFT is a promising candidate for answering both the increasing need of modern society to employ highly functional polymeric materials and the global requirements for developing sustainable chemicals and processes.

  18. Vibrational energy transfer in fluids

    NASA Astrophysics Data System (ADS)

    Miller, David W.; Adelman, Steven A.

    A review of several of the available theories of vibrational energy transfer (VET) in the gas and liquid phases is presented. First the classical theory of gas phase VET mainly due to Landau and Teller, to Jackson and Mott and to Zener is developed in some detail. Next the Schwartz-Slawsky-Herzfeld theory, a framework for analysing VET data based on the classical theory, is outlined. Experimental tests of the classical theory and theoretical critiques of its assumptions are then described. Next a brief review of the modern ab-initio quantum approach to gas phase VET rates, taking as an example the work of Banks, Clary and Werner, is given. Theories of VET at elevated densities are then discussed. The isolated binary collision model is reviewed and a new molecular approach to the density, temperature and isotope dependences of vibrational energy relaxation rates, due to Adelman and co-workers, is outlined.

  19. Energy transfer in macromolecular arrays

    NASA Astrophysics Data System (ADS)

    Andrews, David L.; Jenkins, Robert D.

    2003-11-01

    Macromolecular systems comprised of many light-sensitive centres (the photosynthetic unit, dendrimers, and other highly symmetric multichromophore arrays) are important structures offering challenges to theoreticians and synthetic chemists alike. Here we outline novel photophysical interactions predicted and observed in such arrays. Using the tools of molecular quantum electrodynamics (QED) we present quantum amplitudes for a variety of higher-order resonance energy transfer (RET) schemes associated with well-known nonlinear optical effects such as two- and three-photon absorption. The initial analysis is extended to account for situations where the participant donor species are identical and exist in a highly symmetric environment, leading to the possible formation of excitons. It emerges from the QED theory that such excitons are closely associated with the higher-order RET processes. General results are interpreted by analyzing particular molecular architectures which offer interesting features such as rate enhancement or limitation and exciton pathway quenching. Applications in the areas of photosynthesis, molecular logic gates and low-intensity fluorescence energy transfer are predicted.

  20. Energy Transfer Involving Diatomic Molecules.

    NASA Astrophysics Data System (ADS)

    Gibbons, John Paul

    A three-dimensional, Monte Carlo model for the calculation of vibrational energy relaxation and transfer rates for both diatomic-monatomic and diatomic-diatomic systems was developed, analyzed and implemented. Mediation by internal angular momentum was demonstrated to be important in these energy transfer processes. This was named the TLV mechanism for translation to vibration flow through changes in angular momentum. The equations for the component of vibrational energy change due to the TLV mechanism for the two extreme cases of very hard or very soft collisions were derived. Results of using these equations were compared with those obtained by direct integration of the differential equations of motion and in many cases were found to agree. This mechanism was incorporated into the model in order to achieve statistically significant results within reasonable computer running times. When this was done the variance of a result was frequently reduced by a factor of thirty to fifty or more with little or no increase in the computer times required. This made possible a meaningful study of the full three-dimensional diatomic-diatomic collisional processes and also permitted extension of the mono-diatomic model calculations to much lower temperatures than had been previously investigated. After this calculational procedure was developed for Ar - O(,2) collisions, it was also applied to He - O(,2) and to the near resonant vibration energy exchange process:. CO ((nu)=0)+N(,2)((nu)=1)(--->)CO((nu)=1)+N(,2)((nu)=0). These three processes were investigated at several temperatures between room temperature and 4000K. Exponential repulsive intermolecular potentials were used. The values for the coefficients and characteristic lengths for these potentials were obtained from independent sources both experimental and theoretical. In general, the results, when compared to experiment, are very consistent relative to their dependence on the potential parameters. In every case for all

  1. Geo energy research and development: technology transfer

    SciTech Connect

    Traeger, R.K.

    1982-03-01

    Sandia Geo Energy Programs related to geothermal, coal, oil and gas, and synfuel resources have provided a useful mechanism for transferring laboratory technologies to private industry. Significant transfer of hardware, computer programs, diagnostics and instrumentation, advanced materials, and in situ process understanding has occurred through US/DOE supported programs in the past five years. The text briefly reviews the technology transfer procedures and summarizes 32 items that have been transferred and another 20 technologies that are now being considered for possible transfer to industry. A major factor in successful transfer has been personal interactions between Sandia engineers and the technical staff from private industry during all aspects of the technology development.

  2. Fundamental Interactions Leading to Energy Transfer

    NASA Astrophysics Data System (ADS)

    di Bartolo, Baldassare

    2001-11-01

    The purpose of the lectures reported in this article is to investigate the basic interactions that lead to processes by which excitation energy, initially localized in a particular constituent or restricted region of a material, transfers itself to other parts or degrees of freedom of the system. Energy transfer processes are relevant to such various and important fields as spectroscopy, laser technology, phosphors, artificial solar energy conversion, and photobiology. The subject of the interactions among atoms is introduced by considering first the static and then the dynamic effects of these interactions in a two-atom system. Subsequently the different types of interactions (multipolar, exchange and electromagnetic) in a two-atom system are examined. After reviewing the different modes of excitation of a solid containing both donors and acceptors, a statistical treatment of energy transfer is presented. Firstly the case of energy transfer without migration among donors, and secondly the case of energy transfer in the presence of such migration are considered.

  3. Nonradiative resonance energy transfer between semiconductor quantum dots

    SciTech Connect

    Samosvat, D. M. Chikalova-Luzina, O. P.; Zegrya, G. G.

    2015-07-15

    A microscopic analysis of the mechanisms of nonradiative energy transfer in a system of two semiconductor QDs caused by Coulomb interaction of donor and acceptor electrons is performed. The energy transfer rate is calculated for QDs based on III–V compounds using the Kane model. Conditions are analyzed under which energy transfer from a donor to an acceptor is possible. The mixing in of the p states of the valence band to the s states of the conduction band is found to give rise to additional contributions to the matrix element of energy transfer. It is shown that these additional contributions play a considerable role in the energy transfer process at distances between QDs close to contact distances or much greater. The influence of the exchange interaction on the energy transfer mechanism is analyzed, and it is shown that this interaction should be taken into account for a quantitative description of the energy transfer when QDs are separated by a distance close to the contact distance.

  4. Nonradiative resonance energy transfer between semiconductor quantum dots

    NASA Astrophysics Data System (ADS)

    Samosvat, D. M.; Chikalova-Luzina, O. P.; Zegrya, G. G.

    2015-07-01

    A microscopic analysis of the mechanisms of nonradiative energy transfer in a system of two semiconductor QDs caused by Coulomb interaction of donor and acceptor electrons is performed. The energy transfer rate is calculated for QDs based on III-V compounds using the Kane model. Conditions are analyzed under which energy transfer from a donor to an acceptor is possible. The mixing in of the p states of the valence band to the s states of the conduction band is found to give rise to additional contributions to the matrix element of energy transfer. It is shown that these additional contributions play a considerable role in the energy transfer process at distances between QDs close to contact distances or much greater. The influence of the exchange interaction on the energy transfer mechanism is analyzed, and it is shown that this interaction should be taken into account for a quantitative description of the energy transfer when QDs are separated by a distance close to the contact distance.

  5. Phosphorescence and Energy Transfer in Rigid Solutions.

    ERIC Educational Resources Information Center

    Enciso, E.; Cabello, A.

    1980-01-01

    Describes an experiment which illustrates the general aspects of intermolecular energy transfer between triplet states in rigid solutions of organic compounds solved in an ethanol-ether mixture. Measurements of quenching and energy transfer processes are made using the chemicals of benzophenone and naphthalene. (CS)

  6. Phonon-assisted excitation energy transfer in photosynthetic systems

    NASA Astrophysics Data System (ADS)

    Chen, Hao; Wang, Xin; Fang, Ai-Ping; Li, Hong-Rong

    2016-09-01

    The phonon-assisted process of energy transfer aiming at exploring the newly emerging frontier between biology and physics is an issue of central interest. This article shows the important role of the intramolecular vibrational modes for excitation energy transfer in the photosynthetic systems. Based on a dimer system consisting of a donor and an acceptor modeled by two two-level systems, in which one of them is coupled to a high-energy vibrational mode, we derive an effective Hamiltonian describing the vibration-assisted coherent energy transfer process in the polaron frame. The effective Hamiltonian reveals in the case that the vibrational mode dynamically matches the energy detuning between the donor and the acceptor, the original detuned energy transfer becomes resonant energy transfer. In addition, the population dynamics and coherence dynamics of the dimer system with and without vibration-assistance are investigated numerically. It is found that, the energy transfer efficiency and the transfer time depend heavily on the interaction strength of the donor and the high-energy vibrational mode, as well as the vibrational frequency. The numerical results also indicate that the initial state and dissipation rate of the vibrational mode have little influence on the dynamics of the dimer system. Results obtained in this article are not only helpful to understand the natural photosynthesis, but also offer an optimal design principle for artificial photosynthesis. Project supported by the National Natural Science Foundation of China (Grant No. 11174233).

  7. Reversible addition-fragmentation chain transfer polymerization in microemulsion.

    PubMed

    O'Donnell, Jennifer M

    2012-04-21

    This tutorial review first details the uncontrolled microemulsion polymerization mechanism, and the RAFT polymerization mechanism to provide the necessary background for examining the RAFT microemulsion polymerization mechanism. The effect of the chain transfer agent per micelle ratio and the chain transfer agent aqueous solubility on the RAFT microemulsion polymerization kinetics, polymer molecular weight and polydispersity, and polymer nanoparticle size are discussed with a focus on oil-in-water microemulsions. Modeling of RAFT microemulsion polymerization kinetics and the resulting final polymer molecular weight are presented to assist with the analysis of observed experimental trends. Lastly, the current significance of RAFT microemulsion polymerization and the future directions are discussed. PMID:22246214

  8. Transferability and additivity of dihedral parameters in polarizable and nonpolarizable empirical force fields.

    PubMed

    Zgarbová, Marie; Rosnik, Andreana M; Luque, F Javier; Curutchet, Carles; Jurečka, Petr

    2015-09-30

    Recent advances in polarizable force fields have revealed that major reparameterization is necessary when the polarization energy is treated explicitly. This study is focused on the torsional parameters, which are crucial for the accurate description of conformational equilibria in biomolecules. In particular, attention is paid to the influence of polarization on the (i) transferability of dihedral terms between molecules, (ii) transferability between different environments, and (iii) additivity of dihedral energies. To this end, three polarizable force fields based on the induced point dipole model designed for use in AMBER are tested, including two recent ff02 reparameterizations. Attention is paid to the contributions due to short range interactions (1-2, 1-3, and 1-4) within the four atoms defining the dihedral angle. The results show that when short range 1-2 and 1-3 polarization interactions are omitted, as for instance in ff02, the 1-4 polarization contribution is rather small and unlikely to improve the description of the torsional energy. Conversely, when screened 1-2 and 1-3 interactions are included, the polarization contribution is sizeable and shows potential to improve the transferability of parameters between different molecules and environments as well as the additivity of dihedral terms. However, to reproduce intramolecular polarization effects accurately, further fine-tuning of the short range damping of polarization is necessary.

  9. Transferability and additivity of dihedral parameters in polarizable and nonpolarizable empirical force fields.

    PubMed

    Zgarbová, Marie; Rosnik, Andreana M; Luque, F Javier; Curutchet, Carles; Jurečka, Petr

    2015-09-30

    Recent advances in polarizable force fields have revealed that major reparameterization is necessary when the polarization energy is treated explicitly. This study is focused on the torsional parameters, which are crucial for the accurate description of conformational equilibria in biomolecules. In particular, attention is paid to the influence of polarization on the (i) transferability of dihedral terms between molecules, (ii) transferability between different environments, and (iii) additivity of dihedral energies. To this end, three polarizable force fields based on the induced point dipole model designed for use in AMBER are tested, including two recent ff02 reparameterizations. Attention is paid to the contributions due to short range interactions (1-2, 1-3, and 1-4) within the four atoms defining the dihedral angle. The results show that when short range 1-2 and 1-3 polarization interactions are omitted, as for instance in ff02, the 1-4 polarization contribution is rather small and unlikely to improve the description of the torsional energy. Conversely, when screened 1-2 and 1-3 interactions are included, the polarization contribution is sizeable and shows potential to improve the transferability of parameters between different molecules and environments as well as the additivity of dihedral terms. However, to reproduce intramolecular polarization effects accurately, further fine-tuning of the short range damping of polarization is necessary. PMID:26224547

  10. Elastic Energy Transfer in Turbulence of Dilute Polymer Solution

    NASA Astrophysics Data System (ADS)

    Xi, Heng-Dong; Bodenschatz, Eberhard; Xu, Haitao

    2012-11-01

    We present an experimental study of the energy transfer in the bulk of a turbulent flow with small amount long-chain polymer additives. By varying the Reynolds numbers Rλ, Wissenberg number Wi and polymer concentration φ. We test quantitively the elastic theory proposed by de Gennes and Tabor (Europhys. Lett., 1986; Physica A, 1986). The rate of energy transfer by polymer elasticity as inferred from the theory is consistent with that measured from the second order Eulerian structure functions. The unknown parameter n in the theory, which represents the flow topology of the stretching field, is found to be nearly 1. Based on energy transfer rate balance, We propose an elastic length scale, rɛ, which describes the effect of polymer elasticity on turbulence energy cascade and captures the scale dependence of the elastic energy transfer rate. We are grateful to the Max Planck Society, the Alexander von Humboldt Foundation and the Deutsche Forschungsgemeinschaft for their support.

  11. Classical approach to multichromophoric resonance energy transfer.

    PubMed

    Duque, Sebastián; Brumer, Paul; Pachón, Leonardo A

    2015-09-11

    A classical formulation of the quantum multichromophoric theory of resonance energy transfer is developed on the basis of classical electrodynamics. The theory allows for the identification of a variety of processes of different order in the interactions that contribute to the energy transfer in molecular aggregates with intracoupling in donors and acceptor chromophores. Enhanced rates in multichromophoric resonance energy transfer are shown to be well described by this theory. Specifically, in a coupling configuration between N_{A} acceptors and N_{D} donors, the theory correctly predicts an enhancement of the energy transfer rate dependent on the total number of donor-acceptor pairs. As an example, the theory, applied to the transfer rate in light harvesting II, gives results in excellent agreement with experiment. Finally, it is explicitly shown that as long as linear response theory holds, the classical multichromophoric theory formally coincides with the quantum formulation.

  12. Classical approach to multichromophoric resonance energy transfer.

    PubMed

    Duque, Sebastián; Brumer, Paul; Pachón, Leonardo A

    2015-09-11

    A classical formulation of the quantum multichromophoric theory of resonance energy transfer is developed on the basis of classical electrodynamics. The theory allows for the identification of a variety of processes of different order in the interactions that contribute to the energy transfer in molecular aggregates with intracoupling in donors and acceptor chromophores. Enhanced rates in multichromophoric resonance energy transfer are shown to be well described by this theory. Specifically, in a coupling configuration between N_{A} acceptors and N_{D} donors, the theory correctly predicts an enhancement of the energy transfer rate dependent on the total number of donor-acceptor pairs. As an example, the theory, applied to the transfer rate in light harvesting II, gives results in excellent agreement with experiment. Finally, it is explicitly shown that as long as linear response theory holds, the classical multichromophoric theory formally coincides with the quantum formulation. PMID:26406811

  13. Resonance energy transfer: Dye to metal nanoparticles

    NASA Astrophysics Data System (ADS)

    Wari, M. N.; Pujar, G. H.; Inamdar, S. R.

    2015-06-01

    In the present study, surface energy transfer (SET) from Coumarin 540A (C540 A) to Gold nanoparticle (Au) is demonstrated. The observed results show pronounced effect on the photoluminescence intensity and shortening of the lifetime of Coumarin 540A upon interaction with the spherical gold nanoparticle, also there are measured effects on radiative rate of the dye. Experimental results are analyzed with fluorescence resonance energy transfer (FRET) and SET theories. The results obtained from distance-dependent quenching provide experimental evidence that the efficiency curve slope and distance of quenching is best modeled by surface energy transfer process.

  14. Resonance energy transfer: Dye to metal nanoparticles

    SciTech Connect

    Wari, M. N.; Pujar, G. H.; Inamdar, S. R.

    2015-06-24

    In the present study, surface energy transfer (SET) from Coumarin 540A (C540 A) to Gold nanoparticle (Au) is demonstrated. The observed results show pronounced effect on the photoluminescence intensity and shortening of the lifetime of Coumarin 540A upon interaction with the spherical gold nanoparticle, also there are measured effects on radiative rate of the dye. Experimental results are analyzed with fluorescence resonance energy transfer (FRET) and SET theories. The results obtained from distance-dependent quenching provide experimental evidence that the efficiency curve slope and distance of quenching is best modeled by surface energy transfer process.

  15. Dynamics of excitation energy transfer in phycobiliproteins

    NASA Astrophysics Data System (ADS)

    Zheng, Xiguang; Wang, He Z.; Zhao, Fuli; Gao, Zhaolan; Yu, Zhenxin

    1994-08-01

    Theoretical descriptions of excitation energy transfer between chromophores in allophycocyanin are presented, including bilateral energy transfer paths between chromophores, and are expressed, based on Foster interaction mechanism, as Pauli master equations. Group analysis in C3 symmetry is performed to carry out analytic expressions for fluorescence decays which is generally of triexponential with effects of chromophore coupling and exciton splitting taken account. It is pointed out that the time constant of each decay component contains mixed information of different energy transfer paths, and therefore show its dependence on subtle configuration of chromophores, probably related to site heterogeneity and thus to inhomogeneous broadening previously observed.

  16. Energy transfer processes in solar energy conversion

    SciTech Connect

    Fayer, M.D.

    1992-01-01

    During the past year, we have been working in three general areas: electronic excitation transport in clustered chromophore systems and other complex systems, photo-induced electron transfer and back transfer in liquid solutions in which diffusion and charge interactions are important, and the construction of a new two color dye laser system to enhance our experimental capability.

  17. Optical Energy Transfer and Conversion System

    NASA Technical Reports Server (NTRS)

    Stone, William C. (Inventor); Hogan, Bartholomew P. (Inventor)

    2015-01-01

    An optical power transfer system comprising a fiber spooler, a fiber optic rotary joint mechanically connected to the fiber spooler, and an electrical power extraction subsystem connected to the fiber optic rotary joint with an optical waveguide. Optical energy is generated at and transferred from a base station through fiber wrapped around the spooler, through the rotary joint, and ultimately to the power extraction system at a remote mobility platform for conversion to another form of energy.

  18. Targeting Low-Energy Ballistic Lunar Transfers

    NASA Technical Reports Server (NTRS)

    Parker, Jeffrey S.

    2010-01-01

    Numerous low-energy ballistic transfers exist between the Earth and Moon that require less fuel than conventional transfers, but require three or more months of transfer time. An entirely ballistic lunar transfer departs the Earth from a particular declination at some time in order to arrive at the Moon at a given time along a desirable approach. Maneuvers may be added to the trajectory in order to adjust the Earth departure to meet mission requirements. In this paper, we characterize the (Delta)V cost required to adjust a low-energy ballistic lunar transfer such that a spacecraft may depart the Earth at a desirable declination, e.g., 28.5(white bullet), on a designated date. This study identifies the optimal locations to place one or two maneuvers along a transfer to minimize the (Delta)V cost of the transfer. One practical application of this study is to characterize the launch period for a mission that aims to launch from a particular launch site, such as Cape Canaveral, Florida, and arrive at a particular orbit at the Moon on a given date using a three-month low-energy transfer.

  19. Compost addition reduces porosity and chlordecone transfer in soil microstructure.

    PubMed

    Woignier, Thierry; Clostre, Florence; Fernandes, Paula; Rangon, Luc; Soler, Alain; Lesueur-Jannoyer, Magalie

    2016-01-01

    Chlordecone, an organochlorine insecticide, pollutes soils and contaminates crops and water resources and is biomagnified by food chains. As chlordecone is partly trapped in the soil, one possible alternative to decontamination may be to increase its containment in the soil, thereby reducing its diffusion into the environment. Containing the pesticide in the soil could be achieved by adding compost because the pollutant has an affinity for organic matter. We hypothesized that adding compost would also change soil porosity, as well as transport and containment of the pesticide. We measured the pore features and studied the nanoscale structure to assess the effect of adding compost on soil microstructure. We simulated changes in the transport properties (hydraulic conductivity and diffusion) associated with changes in porosity. During compost incubation, the clay microstructure collapsed due to capillary stresses. Simulated data showed that the hydraulic conductivity and diffusion coefficient were reduced by 95 and 70% in the clay microstructure, respectively. Reduced transport properties affected pesticide mobility and thus helped reduce its transfer from the soil to water and to the crop. We propose that the containment effect is due not only to the high affinity of chlordecone for soil organic matter but also to a trapping mechanism in the soil porosity.

  20. Compost addition reduces porosity and chlordecone transfer in soil microstructure.

    PubMed

    Woignier, Thierry; Clostre, Florence; Fernandes, Paula; Rangon, Luc; Soler, Alain; Lesueur-Jannoyer, Magalie

    2016-01-01

    Chlordecone, an organochlorine insecticide, pollutes soils and contaminates crops and water resources and is biomagnified by food chains. As chlordecone is partly trapped in the soil, one possible alternative to decontamination may be to increase its containment in the soil, thereby reducing its diffusion into the environment. Containing the pesticide in the soil could be achieved by adding compost because the pollutant has an affinity for organic matter. We hypothesized that adding compost would also change soil porosity, as well as transport and containment of the pesticide. We measured the pore features and studied the nanoscale structure to assess the effect of adding compost on soil microstructure. We simulated changes in the transport properties (hydraulic conductivity and diffusion) associated with changes in porosity. During compost incubation, the clay microstructure collapsed due to capillary stresses. Simulated data showed that the hydraulic conductivity and diffusion coefficient were reduced by 95 and 70% in the clay microstructure, respectively. Reduced transport properties affected pesticide mobility and thus helped reduce its transfer from the soil to water and to the crop. We propose that the containment effect is due not only to the high affinity of chlordecone for soil organic matter but also to a trapping mechanism in the soil porosity. PMID:26250815

  1. Wireless energy transfer between anisotropic metamaterials shells

    SciTech Connect

    Díaz-Rubio, Ana; Carbonell, Jorge; Sánchez-Dehesa, José

    2014-06-15

    The behavior of strongly coupled Radial Photonic Crystals shells is investigated as a potential alternative to transfer electromagnetic energy wirelessly. These sub-wavelength resonant microstructures, which are based on anisotropic metamaterials, can produce efficient coupling phenomena due to their high quality factor. A configuration of selected constitutive parameters (permittivity and permeability) is analyzed in terms of its resonant characteristics. The coupling to loss ratio between two coupled resonators is calculated as a function of distance, the maximum (in excess of 300) is obtained when the shells are separated by three times their radius. Under practical conditions an 83% of maximum power transfer has been also estimated. -- Highlights: •Anisotropic metamaterial shells exhibit high quality factors and sub-wavelength size. •Exchange of electromagnetic energy between shells with high efficiency is analyzed. •Strong coupling is supported with high wireless transfer efficiency. •End-to-end energy transfer efficiencies higher than 83% can be predicted.

  2. Energy Transfer in MAGNESIUM-OXIDE:CHROMIUM(+3)

    NASA Astrophysics Data System (ADS)

    O'Neill, Mary

    Available from UMI in association with The British Library. Requires signed TDF. Using steady state and time resolved luminescence spectroscopy energy transfer between Cr^ {+3} ions in MgO was investigated. Five sharp zero-phonon lines observed in the excitation spectrum of the < 100> (Cr _sp{Mg}{cdot } V_sp{Mg} {''} Cr_sp {rm Mg}{cdot}) centre are shown to originate from three distinct donor centres from which excitation is transferred to the acceptor < 100> (Cr_sp {Mg}{cdot} V _sp{Mg}{' '} Cr_sp{Mg}{cdot}) centre. The energy transfer process is non resonant involving either emission of a single phonon or the Raman process. For each donor -acceptor pair, the energy transfer rate is measured by analysing the time dependence of luminescence from the acceptor. The magnitude of the electric quadrupole-quadrupole and the electric dipole-quadrupole donor-acceptor interactions, calculated using group and perturbation theories, is insufficient to account for the observed energy transfer rate. An antiferromagnetic superexchange donor-acceptor interaction governs the transfer process. On the basis of such a mechanism, geometric models are proposed which illustrate the relative positions of the donor and acceptor ions in each of the three systems. In addition to this localised process, energy transfer between randomly distributed Cr^{+3} ions in MgO is investigated. Spectroscopic measurements show that energy is transferred from Cr^ {+3} ions in octahedral symmetry sites to tetragonal and orthorhombic symmetry sites, the extent of transfer is found to be small. Transient grating spectroscopic measurements show that spatial energy migration among resonant Cr^{+3} ion is negligible at low Cr^{+3} concentrations but occurs when the Cr^{+3} concentration is increased.

  3. Excitation energy transfer in the photosystem I

    SciTech Connect

    Webber, Andrew N

    2012-09-25

    Photosystem I is a multimeric pigment protein complex in plants, green alage and cyanobacteria that functions in series with Photosystem II to use light energy to oxidize water and reduce carbon dioxide. The Photosystem I core complex contains 96 chlorophyll a molecules and 22 carotenoids that are involved in light harvesting and electron transfer. In eucaryotes, PSI also has a peripheral light harvesting complex I (LHCI). The role of specific chlorophylls in excitation and electron transfer are still unresolved. In particular, the role of so-called bridging chlorophylls, located between the bulk antenna and the core electron transfer chain, in the transfer of excitation energy to the reaction center are unknown. During the past funding period, site directed mutagenesis has been used to create mutants that effect the physical properties of these key chlorophylls, and to explore how this alters the function of the photosystem. Studying these mutants using ultrafast absorption spectroscopy has led to a better understanding of the process by which excitation energy is transferred from the antenna chlorophylls to the electron transfer chain chlorophylls, and what the role of connecting chlorophylls and A_0 chlorophylls is in this process. We have also used these mutants to investigate whch of the central group of six chlorophylls are involved in the primary steps of charge separation and electron transfer.

  4. Exciton Transfer in Carbon Nanotube Aggregates for Energy Harvesting Applications

    NASA Astrophysics Data System (ADS)

    Davoody, Amirhossein; Karimi, Farhad; Knezevic, Irena

    Carbon nanotubes (CNTs) are promising building blocks for organic photovoltaic devices, owing to their tunable band gap, mechanical and chemical stability. We study intertube excitonic energy transfer between pairs of CNTs with different orientations and band gaps. The optically bright and dark excitonic states in CNTs are calculated by solving the Bethe-Salpeter equation. We calculate the exciton transfer rates due to the direct and exchange Coulomb interactions, as well as the second-order phonon-assisted processes. We show the importance of phonons in calculating the transfer rates that match the measurements. In addition, we discuss the contribution of optically inactive excited states in the exciton transfer process, which is difficult to determine experimentally. Furthermore, we study the effects of sample inhomogeneity, impurities, and temperature on the exciton transfer rate. The inhomogeneity in the CNT sample dielectric function can increase the transfer rate by about a factor of two. We show that the exciton confinement by impurities has a detrimental effect on the transfer rate between pairs of similar CNTs. The exciton transfer rate increases monotonically with increasing temperature. Support by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering under Award DE-SC0008712.

  5. Chemical activation through super energy transfer collisions.

    PubMed

    Smith, Jonathan M; Nikow, Matthew; Ma, Jianqiang; Wilhelm, Michael J; Han, Yong-Chang; Sharma, Amit R; Bowman, Joel M; Dai, Hai-Lung

    2014-02-01

    Can a molecule be efficiently activated with a large amount of energy in a single collision with a fast atom? If so, this type of collision will greatly affect molecular reactivity and equilibrium in systems where abundant hot atoms exist. Conventional expectation of molecular energy transfer (ET) is that the probability decreases exponentially with the amount of energy transferred, hence the probability of what we label "super energy transfer" is negligible. We show, however, that in collisions between an atom and a molecule for which chemical reactions may occur, such as those between a translationally hot H atom and an ambient acetylene (HCCH) or sulfur dioxide, ET of chemically significant amounts of energy commences with surprisingly high efficiency through chemical complex formation. Time-resolved infrared emission observations are supported by quasi-classical trajectory calculations on a global ab initio potential energy surface. Results show that ∼10% of collisions between H atoms moving with ∼60 kcal/mol energy and HCCH result in transfer of up to 70% of this energy to activate internal degrees of freedom.

  6. Magnetospheric feedbacks in solar wind energy transfer

    NASA Astrophysics Data System (ADS)

    Palmroth, Minna; Pulkkinen, Tuija I.; Anekallu, Chandrasekhar R.; Honkonen, Ilja; Koskinen, Hannu E. J.; Lucek, Elizabeth A.; Dandouras, Iannis

    2010-05-01

    The solar wind kinetic energy, fueling all dynamical processes within the near-Earth space, is extracted by a dynamo process at the magnetopause converting kinetic energy into magnetic energy. We investigate the magnetopause energy transfer both in small and large scales; using Cluster observations as well as a three-dimensional global magnetohydrodynamic (MHD) simulation GUMICS-4. In the simulation, the spatial distribution of the energy transfer exhibits a dependence on the interplanetary magnetic field (IMF) orientation, which is shown to agree with observational local estimates from Cluster spacecraft recordings. In both sythetic runs with artificial solar wind input as well as in reproductions of the observed solar wind we observe a "hysteresis" effect, where the magnetopause energy input stays enhanced longer than the traditional energy transfer proxies (e.g., epsilon) indicate. Specifically we focus in the simulation of a substorm sequence on Feb 18, 2004, during which an exceptional agreement between the simulation results and spacecraft recordings was observed on several orbits within the near-Earth space. In this event, we again observe the hysteresis effect and investigate the processes causing it at the magnetopause. We argue that since GUMICS-4 reproduces the observed signatures of the substorm sequence in question, the simulation results represent physical processes within the magnetosphere. We conclude that as the simulation energy input exhibits delays already at the magnetopause, the delays in the classical substorm loading - unloading cycle may be interpreted in a new light.

  7. Rotational Energy Transfer in N2

    NASA Technical Reports Server (NTRS)

    Huo, Winifred M.

    1994-01-01

    Using the N2-N2 intermolecular potential of van der Avoird et al. rotational energy transfer cross sections have been calculated using both the coupled state (CS) and infinite order sudden (IOS) approximations. The rotational energy transfer rate constants at 300 K, calculated in the CS approximation, are in reasonable agreement with the measurements of Sitz and Farrow. The IOS approximation qualitatively reproduces the dependence of the rate constants on the rotational quantum numbers, but consistently overestimates their magnitudes. The treatment of exchange symmetry will be discussed.

  8. Theory of coherent resonance energy transfer

    SciTech Connect

    Jang, Seogjoo; Cheng, Y.-C.; Reichman, David R.; Eaves, Joel D.

    2008-09-14

    A theory of coherent resonance energy transfer is developed combining the polaron transformation and a time-local quantum master equation formulation, which is valid for arbitrary spectral densities including common modes. The theory contains inhomogeneous terms accounting for nonequilibrium initial preparation effects and elucidates how quantum coherence and nonequilibrium effects manifest themselves in the coherent energy transfer dynamics beyond the weak resonance coupling limit of the Foerster and Dexter (FD) theory. Numerical tests show that quantum coherence can cause significant changes in steady state donor/acceptor populations from those predicted by the FD theory and illustrate delicate cooperation of nonequilibrium and quantum coherence effects on the transient population dynamics.

  9. Resonant vibrational energy transfer in ice Ih

    SciTech Connect

    Shi, L.; Li, F.; Skinner, J. L.

    2014-06-28

    Fascinating anisotropy decay experiments have recently been performed on H{sub 2}O ice Ih by Timmer and Bakker [R. L. A. Timmer, and H. J. Bakker, J. Phys. Chem. A 114, 4148 (2010)]. The very fast decay (on the order of 100 fs) is indicative of resonant energy transfer between OH stretches on different molecules. Isotope dilution experiments with deuterium show a dramatic dependence on the hydrogen mole fraction, which confirms the energy transfer picture. Timmer and Bakker have interpreted the experiments with a Förster incoherent hopping model, finding that energy transfer within the first solvation shell dominates the relaxation process. We have developed a microscopic theory of vibrational spectroscopy of water and ice, and herein we use this theory to calculate the anisotropy decay in ice as a function of hydrogen mole fraction. We obtain very good agreement with experiment. Interpretation of our results shows that four nearest-neighbor acceptors dominate the energy transfer, and that while the incoherent hopping picture is qualitatively correct, vibrational energy transport is partially coherent on the relevant timescale.

  10. Experimental study of enhanced heat transfer by addition of CuO nanoparticle

    NASA Astrophysics Data System (ADS)

    Jesumathy, Stella; Udayakumar, M.; Suresh, S.

    2012-06-01

    An energy storage system has been designed to study the thermal characteristics of paraffin wax with an embedded nano size copper oxide (CuO) particle. This paper presents studies conducted on phase transition times, heat fraction as well as heat transfer characteristics of paraffin wax as phase change material (PCM) embedded with CuO nanoparticles. 40 nm mean size CuO particles of 2, 5 and 10% by weight were dispersed in PCM for this study. Experiments were performed on a heat exchanger with 1.5-10 l/min of heat transfer fluid (HTF) flow. Time-based variations of the temperature distributions are revealed from the results of observations of melting and solidification curves. The results strongly suggested that the thermal conductivity enhances 6, 6.7 and 7.8% in liquid state and in dynamic viscosity it enhances by 5, 14 and 30% with increasing mass fraction of the CNEPs. The thermal conductivity ratio of the composites can be augmented by a factor up to 1.3. The heat transfer coefficient during solidification increased about 78% for the maximum flow rate. The analysis of experimental results reveals that the addition of copper oxide nanoparticles to the paraffin wax enhances both the conduction and natural convection very effectively in composites and in paraffin wax. The paraffin wax-based composites have great potential for energy storage applications like industrial waste heat recovery, solar thermal applications and solar based dynamic space power generation with optimal fraction of copper oxide nanoparticles.

  11. Low Energy Transfer to the Moon

    NASA Astrophysics Data System (ADS)

    Koon, W. S.; Lo, M. W.; Marsden, J. E.; Ross, S. D.

    In 1991, the Japanese Hiten mission used a low energy transfer with a ballistic capture at the Moon which required less Δ V than a standard Hohmann transfer. In this paper, we apply the dynamical systems techniques developed in our earlier work to reproduce systematically a Hiten-like mission. We approximate the Sun-Earth-Moon-spacecraft 4-body system as two 3-body systems. Using the invariant manifold structures of the Lagrange points of the 3-body systems, we are able to construct low energy transfer trajectories from the Earth which execute ballistic capture at the Moon. The techniques used in the design and construction of this trajectory may be applied in many situations.

  12. Energy transfer of nucleic acid products

    NASA Astrophysics Data System (ADS)

    Jung, Paul M.; Hu, Hsiang-Yun; Khalil, Omar S.

    1995-04-01

    Fluorescence energy transfer was investigated as a homogeneous detection method for the gapped ligase chain reaction (G-LCR). Oligonucleotides of a Chlamydia trachomatic G-LCR probe set were labeled with fluorescein as the donor and Texas Red as the acceptor fluorophore. Amplification and detection of 10 molecules of synthetic target was demonstrated in spiked urine samples.

  13. Energy Efficient Storage and Transfer of Cryogens

    NASA Technical Reports Server (NTRS)

    Fesmire, James E.

    2013-01-01

    Cryogenics is globally linked to energy generation, storage, and usage. Thermal insulation systems research and development is an enabling part of NASA's technology goals for Space Launch and Exploration. New thermal testing methodologies and materials are being transferred to industry for a wide range of commercial applications.

  14. Conformational disorder in energy transfer: beyond Förster theory.

    PubMed

    Nelson, Tammie; Fernandez-Alberti, Sebastian; Roitberg, Adrian E; Tretiak, Sergei

    2013-06-21

    Energy transfer in donor-acceptor chromophore pairs, where the absorption of each species is well separated while donor emission and acceptor absorption overlap, can be understood through a Förster resonance energy transfer model. The picture is more complex for organic conjugated polymers, where the total absorption spectrum can be described as a sum of the individual contributions from each subunit (chromophore), whose absorption is not well separated. Although excitations in these systems tend to be well localized, traditional donors and acceptors cannot be defined and energy transfer can occur through various pathways where each subunit (chromophore) is capable of playing either role. In addition, fast torsional motions between individual monomers can break conjugation and lead to reordering of excited state energy levels. Fast torsional fluctuations occur on the same timescale as electronic transitions leading to multiple trivial unavoided crossings between excited states during dynamics. We use the non-adiabatic excited state molecular dynamics (NA-ESMD) approach to simulate energy transfer between two poly-phenylene vinylene (PPV) oligomers composed of 3-rings and 4-rings, respectively, separated by varying distances. The change in the spatial localization of the transient electronic transition density, initially localized on the donors, is used to determine the transfer rate. Our analysis shows that evolution of the intramolecular transition density can be decomposed into contributions from multiple transfer pathways. Here we present a detailed analysis of ensemble dynamics as well as a few representative trajectories which demonstrate the intertwined role of electronic and conformational processes. Our study reveals the complex nature of energy transfer in organic conjugated polymer systems and emphasizes the caution that must be taken in performing such an analysis when a single simple unidirectional pathway is unlikely. PMID:23657784

  15. Risk transfer via energy savings insurance

    SciTech Connect

    Mills, Evan

    2001-10-01

    Among the key barriers to investment in energy efficiency improvements are uncertainties about attaining projected energy savings and apprehension about potential disputes over these savings. The fields of energy management and risk management are thus intertwined. While many technical methods have emerged to manage performance risks (e.g. building commissioning), financial risk transfer techniques are less developed in the energy management arena than in other more mature segments of the economy. Energy Savings Insurance (ESI) - formal insurance of predicted energy savings - is one method of transferring financial risks away from the facility owner or energy services contractor. ESI offers a number of significant advantages over other forms of financial risk transfer, e.g. savings guarantees or performance bonds. ESI providers manage risk via pre-construction design review as well as post-construction commissioning and measurement and verification of savings. We found that the two mos t common criticisms of ESI - excessive pricing and onerous exclusions - are not born out in practice. In fact, if properly applied, ESI can potentially reduce the net cost of energy savings projects by reducing the interest rates charged by lenders, and by increasing the level of savings through quality control. Debt service can also be ensured by matching loan payments to projected energy savings while designing the insurance mechanism so that payments are made by the insurer in the event of a savings shortfall. We estimate the U.S. ESI market potential of $875 million/year in premium income. From an energy-policy perspective, ESI offers a number of potential benefits: ESI transfers performance risk from the balance sheet of the entity implementing the energy savings project, thereby freeing up capital otherwise needed to ''self-insure'' the savings. ESI reduces barriers to market entry of smaller energy services firms who do not have sufficiently strong balance sheets to self

  16. Intermolecular Atom Transfer Radical Addition to Olefins Mediated by Oxidative Quenching of Photoredox Catalysts

    PubMed Central

    Nguyen, John D.; Tucker, Joseph W.; Konieczynska, Marlena D.; Stephenson, Corey R. J.

    2011-01-01

    Atom transfer radical addition of haloalkanes and α-halocarbonyls to olefins is efficiently performed with the photocatalyst Ir[(dF(CF3)ppy)2(dtbbpy)]PF6. This protocol is characterized by excellent yields, mild conditions, low catalyst loading, and broad scope. In addition, the atom transfer protocol can be used to quickly and efficiently introduce vinyl trifluoromethyl groups to olefins and access 1,1-cyclopropane diesters. PMID:21381734

  17. Can an energy balance model provide additional constraints on how to close the energy imbalance?

    PubMed Central

    Wohlfahrt, Georg; Widmoser, Peter

    2013-01-01

    Elucidating the causes for the energy imbalance, i.e. the phenomenon that eddy covariance latent and sensible heat fluxes fall short of available energy, is an outstanding problem in micrometeorology. This paper tests the hypothesis that the full energy balance, through incorporation of additional independent measurements which determine the driving forces of and resistances to energy transfer, provides further insights into the causes of the energy imbalance and additional constraints on energy balance closure options. Eddy covariance and auxiliary data from three different biomes were used to test five contrasting closure scenarios. The main result of our study is that except for nighttime, when fluxes were low and noisy, the full energy balance generally did not contain enough information to allow further insights into the causes of the imbalance and to constrain energy balance closure options. Up to four out of the five tested closure scenarios performed similarly and in up to 53% of all cases all of the tested closure scenarios resulted in plausible energy balance values. Our approach may though provide a sensible consistency check for eddy covariance energy flux measurements. PMID:24465072

  18. Can an energy balance model provide additional constraints on how to close the energy imbalance?

    PubMed

    Wohlfahrt, Georg; Widmoser, Peter

    2013-02-15

    Elucidating the causes for the energy imbalance, i.e. the phenomenon that eddy covariance latent and sensible heat fluxes fall short of available energy, is an outstanding problem in micrometeorology. This paper tests the hypothesis that the full energy balance, through incorporation of additional independent measurements which determine the driving forces of and resistances to energy transfer, provides further insights into the causes of the energy imbalance and additional constraints on energy balance closure options. Eddy covariance and auxiliary data from three different biomes were used to test five contrasting closure scenarios. The main result of our study is that except for nighttime, when fluxes were low and noisy, the full energy balance generally did not contain enough information to allow further insights into the causes of the imbalance and to constrain energy balance closure options. Up to four out of the five tested closure scenarios performed similarly and in up to 53% of all cases all of the tested closure scenarios resulted in plausible energy balance values. Our approach may though provide a sensible consistency check for eddy covariance energy flux measurements.

  19. Light increases energy transfer efficiency in a boreal stream.

    PubMed

    Lesutienė, Jūratė; Gorokhova, Elena; Stankevičienė, Daiva; Bergman, Eva; Greenberg, Larry

    2014-01-01

    Periphyton communities of a boreal stream were exposed to different light and nutrient levels to estimate energy transfer efficiency from primary to secondary producers using labeling with inorganic (13)C. In a one-day field experiment, periphyton grown in fast-flow conditions and dominated by opportunistic green algae were exposed to light levels corresponding to sub-saturating (forest shade) and saturating (open stream section) irradiances, and to N and P nutrient additions. In a two-week laboratory experiment, periphyton grown in low-flow conditions and dominated by slowly growing diatoms were incubated under two sub-saturating light and nutrient enrichment levels as well as grazed and non-grazed conditions. Light had significant positive effect on (13)C uptake by periphyton. In the field experiment, P addition had a positive effect on (13)C uptake but only at sub-saturating light levels, whereas in the laboratory experiment nutrient additions had no effect on the periphyton biomass, (13)C uptake, biovolume and community composition. In the laboratory experiment, the grazer (caddisfly) effect on periphyton biomass specific (13)C uptake and nutrient content was much stronger than the effects of light and nutrients. In particular, grazers significantly reduced periphyton biomass and increased biomass specific (13)C uptake and C:nutrient ratios. The energy transfer efficiency, estimated as a ratio between (13)C uptake by caddisfly and periphyton, was positively affected by light conditions, whereas the nutrient effect was not significant. We suggest that the observed effects on energy transfer were related to the increased diet contribution of highly palatable green algae, stimulated by higher light levels. Also, high heterotrophic microbial activity under low light levels would facilitate energy loss through respiration and decrease overall trophic transfer efficiency. These findings suggest that even a small increase in light intensity could result in community

  20. Rates of mass, momentum, and energy transfer at the magnetopause

    NASA Technical Reports Server (NTRS)

    Hill, T. W.

    1979-01-01

    Empirical estimates of the global rates of transfer of solar wind mass, tangential momentum, and energy at the Earth's magnetopause are presented for comparison against model estimates based on the four principal mechanisms that have been proposed to explain such transfer. The comparisons, although not quite conclusive, strongly favor a model that incorporates some combination of direct magnetic connection and anomalous cross field diffusion. An additional global constraint, the rate at which magnetic flux is cycled through the magnetospheric convection system, strongly suggests that direct magnetic connection plays a significant if not dominant role in the solar wind/magnetosphere interaction.

  1. Heat transfer characteristics for some coolant additives used for water cooled engines

    SciTech Connect

    Abou-Ziyan, H.Z.; Helali, A.H.B.

    1996-12-31

    Engine coolants contain certain additives to prevent engine overheating or coolant freezing in cold environments. Coolants, also, contain corrosion and rust inhibitors, among other additives. As most engines are using engine cooling solutions, it is of interest to evaluate the effect of engine coolants on the boiling heat transfer coefficient. This has its direct impact on radiator size and environment. This paper describes the apparatus and the measurement techniques. Also, it presents the obtained boiling heat transfer results at different parameters. Three types of engine coolants and their mixtures in distilled water are evaluated, under sub-cooled and saturated boiling conditions. A profound effect of the presence of additives in the coolant, on heat transfer, was clear since changes of heat transfer for different coolants were likely to occur. The results showed that up to 180% improvement of boiling heat transfer coefficient is experienced with some types of coolants. However, at certain concentrations other coolants provide deterioration or not enhancement in the boiling heat transfer characteristics. This investigation proved that there are limitations, which are to be taken into consideration, for the composition of engine coolants in different environments. In warm climates, ethylene glycol should be kept at the minimum concentration required for dissolving other components, whereas borax is beneficial to the enhancement of the heat transfer characteristics.

  2. Two-photon excitation energy transfer microscopy

    NASA Astrophysics Data System (ADS)

    Periasamy, Ammasi

    2000-04-01

    Fluorescence resonance energy transfer (FRET) imaging is a unique tool used to visualize the spaciotemporal dynamics of protein-protein interactions in living cells. We used FRET to study the dimerization of the pituitary-specific transcription factor of Pit-1 fused with blue flourescent protein and green fluorescent protein. Transcriptional activity of the GFP- and BFP-Pit-1 fusion proteins was demonstrated by their ability to activate the prolactin gene promoter. The energy transfer in the conventional fluorescence microscopy was less efficient due to photobleaching of the BFP-Pit-1 donor molecules. In our studies we developed two-photon excitation energy transfer microscopy, where the photobleaching of blue flourescent protein was considerably reduced. This 2p-FRET imaging system was used to acquire the donor and acceptor images for a living HeLa cell nucleus. We selected 732 nm from the tunable Verdi pumped ti:sapphire laser, in a way that only excites the BFP-Pit-1 and not the GFP-Pit-1 proteins. The efficiency of the 2p-FRET signal increased to 30 percent compared to the conventional FRET imaging, which clearly demonstrates that there is considerable reduction in photobleaching of donor molecules in the 2p-FRET microscopy.

  3. Wireless Energy Transfer Through Magnetic Reluctance Coupling

    NASA Astrophysics Data System (ADS)

    Pillatsch, P.

    2014-11-01

    Energy harvesting from human motion for body worn or implanted devices faces the problem of the wearer being still, e.g. while asleep. Especially for medical devices this can become an issue if a patient is bed-bound for prolonged periods of time and the internal battery of a harvesting system is not recharged. This article introduces a mechanism for wireless energy transfer based on a previously presented energy harvesting device. The internal rotor of the energy harvester is made of mild steel and can be actuated through a magnetic reluctance coupling to an external motor. The internal piezoelectric transducer is consequently actuated and generates electricity. This paper successfully demonstrates energy transfer over a distance of 16 mm in air and an achieved power output of 85 μW at 25 Hz. The device functional volume is 1.85 cm3. Furthermore, it was demonstrated that increasing the driving frequency beyond 25 Hz did not yield a further increase in power output. Future research will focus on improving the reluctance coupling, e.g. by investigating the use of multiple or stronger magnets, in order to increase transmission distance.

  4. Micro-Plasma Transferred Arc Additive Manufacturing for Die and Mold Surface Remanufacturing

    NASA Astrophysics Data System (ADS)

    Jhavar, Suyog; Paul, Christ Prakash; Jain, Neelesh Kumar

    2016-07-01

    Micro-plasma transferred arc ( µPTA) additive manufacturing is one of the newest options for remanufacturing of dies and molds surfaces in the near-millimeter range leading to extended usage of the same. We deployed an automatic micro-plasma deposition setup to deposit a wire of 300 µm of AISI P20 tool steel on the substrate of same material for the potential application in remanufacturing of the die and mold surface. Our present research effort is to establish µPTA additive manufacturing as a viable economical and cleaner methodology for potential industrial applications. We undertook the optimization of single weld bead geometry as the first step in our present study. Bead-on-plate trials were conducted to deposit single bead geometry at various processing parameters. The bead geometry (shape and size) and dilution were measured and the parametric dependence was derived. A set of parameters leading to reproducible regular and smooth single bead geometry were identified and used to prepare a thin wall for mechanical testing. The deposits were subjected to material characterization such as microscopic studies, micro-hardness measurements and tensile testing. The process was compared qualitatively with other deposition processes involving high-energy density beams and was found to be advantageous in terms of low initial and running costs with comparable properties. The outcome of the study confirmed the process capability of µPTA deposition leading to deployment of cost-effective and environmentally friendlier technology for die and mold remanufacturing.

  5. Spectral Gap Energy Transfer in Atmospheric Boundary Layer

    NASA Astrophysics Data System (ADS)

    Bhushan, S.; Walters, K.; Barros, A. P.; Nogueira, M.

    2012-12-01

    Experimental measurements of atmospheric turbulence energy spectra show E(k) ~ k-3 slopes at synoptic scales (~ 600 km - 2000 km) and k-5/3 slopes at the mesoscales (< 400 km). The -5/3 spectra is presumably related to 3D turbulence which is dominated by the classical Kolmogrov energy cascade. The -3 spectra is related to 2D turbulence, which is dominated by strong forward scatter of enstrophy and weak forward scatter of energy. In classical 2D turbulence theory, it is expected that a strong backward energy cascade would develop at the synoptic scale, and that circulation would grow infinitely. To limit this backward transfer, energy arrest at macroscales must be introduced. The most commonly used turbulence models developed to mimic the above energy transfer include the energy backscatter model for 2D turbulence in the horizontal plane via Large Eddy Simulation (LES) models, dissipative URANS models in the vertical plane, and Ekman friction for the energy arrest. One of the controversial issues surrounding the atmospheric turbulence spectra is the explanation of the generation of the 2D and 3D spectra and transition between them, for energy injection at the synoptic scales. Lilly (1989) proposed that the existence of 2D and 3D spectra can only be explained by the presence of an additional energy injection in the meso-scale region. A second issue is related to the observations of dual peak spectra with small variance in meso-scale, suggesting that the energy transfer occurs across a spectral gap (Van Der Hoven, 1957). Several studies have confirmed the spectral gap for the meso-scale circulations, and have suggested that they are enhanced by smaller scale vertical convection rather than by the synoptic scales. Further, the widely accepted energy arrest mechanism by boundary layer friction is closely related to the spectral gap transfer. This study proposes an energy transfer mechanism for atmospheric turbulence with synoptic scale injection, wherein the generation

  6. Metal Linkage Effects on Ultrafast Energy Transfer.

    PubMed

    Dekkiche, Hervé; Buisson, Antoine; Langlois, Adam; Karsenti, Paul-Ludovic; Ruhlmann, Laurent; Ruppert, Romain; Harvey, Pierre

    2016-07-18

    We report the preparation of several new porphyrin homodimers bridged by a platinum(II) ion in which very intense electronic communication through the coordination link occurs. Moreover, the synthesis of a new porphyrin dyad and its photophysical properties are reported. This dyad exhibits the fastest singlet energy transfer ever reported for synthetic systems between a zinc(II) porphyrin and a porphyrin free base. This extremely fast transfer (∼100 femtoseconds) is in the same range as the fastest one measured in natural systems. This feature is due to the platinum(II) linker, which allows for strong MO couplings between the two porphyrin units as experimentally supported by electrochemistry and corroborated by DFT computations. PMID:27333487

  7. Low-Energy Ballistic Transfers to Lunar Halo Orbits

    NASA Technical Reports Server (NTRS)

    Parker, Jeffrey S.

    2009-01-01

    Recent lunar missions have begun to take advantage of the benefits of low-energy ballistic transfers between the Earth and the Moon rather than implementing conventional Hohmann-like lunar transfers. Both Artemis and GRAIL plan to implement low-energy lunar transfers in the next few years. This paper explores the characteristics and potential applications of many different families of low-energy ballistic lunar transfers. The transfers presented here begin from a wide variety of different orbits at the Earth and follow several different distinct pathways to the Moon. This paper characterizes these pathways to identify desirable low-energy lunar transfers for future lunar missions.

  8. Vibrational energy transfer in high explosives: Nitromethane

    SciTech Connect

    Hong, X.; Hill, J.R.; Dlott, D.D.

    1996-03-01

    Time resolved vibrational spectroscopy with picosecond tunable mid-infrared pulses is used to measure the rates and investigate the detailed mechanisms of multiphonon up-pumping and vibrational cooling in a condensed high explosive, nitromethane. Both processes occur on the 100 ps time scale under ambient conditions. The mechanisms involve sequential climbing or descending the ladder of molecular vibrations. Efficient intermolecular vibrational energy transfer from various molecules to the symmetric stretching excitation of NO2 is observed. The implications of these measurements for understanding shock initiation to detonation and the sensitivities of energetic materials to shock initiation are discussed briefly.

  9. Nanoparticles for heat transfer and thermal energy storage

    SciTech Connect

    Singh, Dileep; Cingarapu, Sreeram; Timofeeva, Elena V.; Moravek, Michael

    2015-07-14

    An article of manufacture and method of preparation thereof. The article of manufacture and method of making the article includes an eutectic salt solution suspensions and a plurality of nanocrystalline phase change material particles having a coating disposed thereon and the particles capable of undergoing the phase change which provides increase in thermal energy storage. In addition, other articles of manufacture can include a nanofluid additive comprised of nanometer-sized particles consisting of copper decorated graphene particles that provide advanced thermal conductivity to heat transfer fluids.

  10. Energy Transfer in the Earth-Sun System

    NASA Astrophysics Data System (ADS)

    Lui, A. T. Y.; Kamide, Y.

    2007-02-01

    Conference on Earth-Sun System Exploration: Energy Transfer; Kailua-Kona, Hawaii, USA, 16-20 January 2006; The goal of this conference, which was supported by several agencies and organizations, was to provide a forum for physicists engaged in the Earth-Sun system as well as in laboratory experiments to discuss and exchange knowledge and ideas on physical processes involving energy transfer. The motivation of the conference stemmed from the following realization: Space assets form an important fabric of our society, performing functions such as television broadcasting, cell- phone communication, navigation, and remote monitoring of tropospheric weather. There is increasing awareness of how much our daily activities can be adversely affected by space disturbances stretching all the way back to the Sun. In some of these energetic phenomena, energy in various forms can propagate long distances from the solar surface to the interplanetary medium and eventually to the Earth's immediate space environment, namely, its magnetosphere, ionosphere, and thermosphere. In addition, transformation of energy can take place in these space disturbances, allowing charged-particle energy to be transformed to electromagnetic energy or vice versa. In- depth understanding of energy transformation and transmission in the Earth-Sun system will foster the identification of physical processes responsible for space disturbances and the prediction of their occurrences and effects. Participants came from 15 countries.

  11. Energy transfer processes in solar energy conversion. Progress report

    SciTech Connect

    Fayer, M.D.

    1989-11-01

    We have made substantial progress in experimental and theoretical studies in two areas: Photoinduced donor to acceptor electron transfer followed by back transfer in random solutions; and electronic excitation transport in systems with complex inhomogeneous spatial geometries and inhomogeneous energy distributions. Through the development of accurate statistical mechanical theories, we have been able to relate dynamics in complex systems to experimental observables. We have then used the experimental observables, time resolved fluorescence depolarization and transient grating experiments, to examine well defined molecular systems. The agreement between theory and experiment is excellent. 11 refs.

  12. 27 CFR 479.83 - Transfer tax in addition to import duty.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2011-04-01 2010-04-01 true Transfer tax in addition to import duty. 479.83 Section 479.83 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE...

  13. 27 CFR 479.83 - Transfer tax in addition to import duty.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2014-04-01 2014-04-01 false Transfer tax in addition to import duty. 479.83 Section 479.83 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS,...

  14. 27 CFR 479.83 - Transfer tax in addition to import duty.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2013-04-01 2013-04-01 false Transfer tax in addition to import duty. 479.83 Section 479.83 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS,...

  15. 27 CFR 479.83 - Transfer tax in addition to import duty.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Transfer tax in addition to import duty. 479.83 Section 479.83 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS,...

  16. 27 CFR 479.83 - Transfer tax in addition to import duty.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2012-04-01 2010-04-01 true Transfer tax in addition to import duty. 479.83 Section 479.83 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE...

  17. Copper-homoscorpionate complexes as active catalysts for atom transfer radical addition to olefins.

    PubMed

    Muñoz-Molina, José María; Caballero, Ana; Díaz-Requejo, M Mar; Trofimenko, Swiatoslaw; Belderraín, Tomas R; Pérez, Pedro J

    2007-09-17

    Cu(I) complexes containing trispyrazolylborate ligands efficiently catalyze the atom transfer radical addition (ATRA) of polyhalogenated alkanes to various olefins under mild conditions. The catalytic activity is enhanced when bulky and electron donating Tpx ligands are employed. Kinetic data have allowed the proposal of a mechanistic interpretation that includes a Cu(II) pentacoordinated species that regulates the catalytic cycle.

  18. Chill water additive controls transfer of Salmonella and Campylobacter by improved chlorine efficacy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In earlier work, we showed that a proprietary additive (T-128) maintains chlorine activity in the presence of organic material such as broiler parts. T-128 improves the efficacy of chlorine to control transfer of Campylobacter and Salmonella from inoculated wings to un-inoculated wings during immer...

  19. Photochemical electron transfer mediated addition of naphthylamine derivatives to electron-deficient alkenes.

    PubMed

    Jahjah, Rabih; Gassama, Abdoulaye; Dumur, Frédéric; Marinković, Siniša; Richert, Sabine; Landgraf, Stephan; Lebrun, Aurélien; Cadiou, Cyril; Sellès, Patrice; Hoffmann, Norbert

    2011-09-01

    Using photochemical electron transfer, N,N-dimethylnaphthylamine derivatives are added to α,β-unsaturated carboxylates. The addition takes place exclusively in the α-position of electron-deficient alkenes and mainly in the 4-position of N,N-dimethylnaphthalen-1-amine. A minor regioisomer results from the addition in the 5-position of this naphthylamine. A physicochemical study reveals that the fluorescence quenching of N,N-dimethylnaphthalen-1-amine is diffusion-controlled and that the back electron transfer is highly efficient. Therefore no transformation is observed at lower concentrations. To overcome this limitation and to induce an efficient transformation, minor amounts of water or another proton donor as well as an excess of the naphthylamine derivative are necessary. A mechanism involving a contact radical ion pair is discussed. Isotopic labeling experiments reveal that no hydrogen is directly transferred between the substrates. The hydrogen transfer to the furanone moiety observed in the overall reaction therefore results from an exchange with the reaction medium. An electrophilic oxoallyl radical generated from the furanone reacts with the naphthylamine used in excess. Concerning some mechanistic details, the reaction is compared with radical and electrophilic aromatic substitutions. The transformation was carried out with a variety of electron-deficient alkenes. Sterically hindered furanone derivatives are less reactive under standard conditions. In a first experiment, such a compound was transformed using heterogeneous electron transfer photocatalysis with TiO(2).

  20. Outcome following addition of peroneus brevis tendon transfer to treatment of acquired posterior tibial tendon insufficiency.

    PubMed

    Song, S J; Deland, J T

    2001-04-01

    The flexor digitorum longus, the tendon most often used for transfer in posterior tibial tendon insufficiency, is one-half to one-third the size of the posterior tibial tendon. Occasionally it may be particularly small or may have been previously used for transfer. In these cases, the senior author has felt that the addition of a transfer of the Peroneus Brevis (PBr) tendon may be helpful in maintaining sufficient tendon and muscle mass to rebalance the foot. Thirteen patients who underwent this procedure were retrospectively identified and matched by age and length of follow-up to patients who underwent a more standard tendon transfer operation minus the addition of the PBr transfer. Pain and functional status were then assessed by the American Orthopaedic Foot and Ankle Society's ankle/hindfoot rating scale. Each patient was tested by an independent physical therapist to evaluate inversion and eversion strength. The mean duration of follow-up was 20.6 months (12 to 34 months). The average AOFAS score of the PBr group was 75.8 compared to 71.5 for the standard control group. There was no significant difference between the groups when inversion or eversion strengths were compared. Inversion strength and eversion strength was rated good or excellent (4 or 5) in 12 out of 13 of the PBr transfer group patients. No major complications were encountered in either group. Although it does not increase inversion strength, a PBr transfer can be used to augment a small FDL without causing significant eversion weakness. This can be useful when the FDL is particularly small or in revision surgery. PMID:11354442

  1. Energy transfer in stably stratified turbulence

    NASA Astrophysics Data System (ADS)

    Kimura, Yoshifumi; Herring, Jackson

    2015-11-01

    Energy transfer in forced stable stratified turbulence is investigated using pseudo-spectral DNS of the Navier-Stokes equations under the Boussinesq approximation with 10243 grid points. Making use of the Craya-Herring decomposition, the velocity field is decomposed into vortex (Φ1) and wave (Φ2) modes. To understand the anisotropy of stably stratified turbulence, the energy flues in terms of the spherical, the horizontal and the vertical wave numbers, are investigated for the total kinetic, Φ1, Φ2 energies, respectively. Among the three fluxes, the spherical and the horizontal look similar for strong stratification, and Φ1 flux shows a wave number region of constant value, which implies Kolmogorov's inertial range. The corresponding spectral power are, however, k - 5 / 2 for the spherical and k⊥- 5 / 3 for the horizontal cases. In contrast to these, the vertical energy fluxes show completely different features. We have observed the saturation spectrum E (kz) ~ CN2kz-3 for strong stratification as before, but the mechanism to produce this spectrum seems different from the Kolmogorov picture.

  2. Enhancing radiative energy transfer through thermal extraction

    NASA Astrophysics Data System (ADS)

    Tan, Yixuan; Liu, Baoan; Shen, Sheng; Yu, Zongfu

    2016-06-01

    Thermal radiation plays an increasingly important role in many emerging energy technologies, such as thermophotovoltaics, passive radiative cooling and wearable cooling clothes [1]. One of the fundamental constraints in thermal radiation is the Stefan-Boltzmann law, which limits the maximum power of far-field radiation to P0 = σT4S, where σ is the Boltzmann constant, S and T are the area and the temperature of the emitter, respectively (Fig. 1a). In order to overcome this limit, it has been shown that near-field radiations could have an energy density that is orders of magnitude greater than the Stefan-Boltzmann law [2-7]. Unfortunately, such near-field radiation transfer is spatially confined and cannot carry radiative heat to the far field. Recently, a new concept of thermal extraction was proposed [8] to enhance far-field thermal emission, which, conceptually, operates on a principle similar to oil immersion lenses and light extraction in light-emitting diodes using solid immersion lens to increase light output [62].Thermal extraction allows a blackbody to radiate more energy to the far field than the apparent limit of the Stefan-Boltzmann law without breaking the second law of thermodynamics. Thermal extraction works by using a specially designed thermal extractor to convert and guide the near-field energy to the far field, as shown in Fig. 1b. The same blackbody as shown in Fig. 1a is placed closely below the thermal extractor with a spacing smaller than the thermal wavelength. The near-field coupling transfers radiative energy with a density greater than σT4. The thermal extractor, made from transparent and high-index or structured materials, does not emit or absorb any radiation. It transforms the near-field energy and sends it toward the far field. As a result, the total amount of far-field radiative heat dissipated by the same blackbody is greatly enhanced above SσT4, where S is the area of the emitter. This paper will review the progress in thermal

  3. Extended emission wavelength of random dye lasers by exploiting radiative and non-radiative energy transfer

    NASA Astrophysics Data System (ADS)

    Wan Ismail, Wan Zakiah; Goldys, Ewa M.; Dawes, Judith M.

    2016-02-01

    We demonstrate long-wavelength operation (>700 nm) of random dye lasers (using a methylene blue dye) with the addition of rhodamine 6G and titania, enabled by radiative and non-radiative energy transfer. The pump energy is efficiently absorbed and transferred to the acceptors, to support lasing in random dye lasers in the near infrared. The optimum random laser performance with the highest emission intensity and the lowest lasing threshold was achieved for a concentration of methylene blue as the acceptor equal to 6× the concentration of rhodamine 6G (donor). Excessive levels of methylene blue increased the lasing threshold and broadened the methylene blue emission linewidth due to dye quenching from re-absorption. This is due to competition between the donor emission and energy transfer and between absorption loss and fluorescence quenching. The radiative and non-radiative energy transfer is analyzed as a function of the acceptor concentration and pump energy density, with consideration of the spectral overlap. The dependence of the radiative and non-radiative transfer efficiency on the acceptor concentration is obtained, and the energy transfer parameters, including the radiative and non-radiative energy transfer rate constants ( K R and K NR), are investigated using Stern-Volmer analysis. The analysis indicates that radiative energy transfer is the dominant energy transfer mechanism in this system.

  4. Anisotropic energy transfers in quasi-static magnetohydrodynamic turbulence

    SciTech Connect

    Reddy, K. Sandeep; Kumar, Raghwendra; Verma, Mahendra K.

    2014-10-15

    We perform direct numerical simulations of quasi-static magnetohydrodynamic turbulence and compute various energy transfers including the ring-to-ring and conical energy transfers, and the energy fluxes of the perpendicular and parallel components of the velocity field. We show that the rings with higher polar angles transfer energy to ones with lower polar angles. For large interaction parameters, the dominant energy transfer takes place near the equator (polar angle θ≈(π)/2 ). The energy transfers are local both in wavenumbers and angles. The energy flux of the perpendicular component is predominantly from higher to lower wavenumbers (inverse cascade of energy), while that of the parallel component is from lower to higher wavenumbers (forward cascade of energy). Our results are consistent with earlier results, which indicate quasi two-dimensionalization of quasi-static magnetohydrodynamic flows at high interaction parameters.

  5. Energy transfer in isotropic turbulence at low Reynolds numbers

    NASA Technical Reports Server (NTRS)

    Domaradzki, J. A.; Rogallo, R. S.

    1988-01-01

    Detailed measurements were made of energy transfer among the scales of motion in incompressible turbulent fields at low Reynolds numbers generated by direct numerical simulation. It was observed that although the transfer resulted from triad interactions that were non-local in k space, the energy always transferred locally. The results are consistent with the notion of non-uniform advection of small weak eddies by larger and stronger ones, similar to transfer processes in the far dissipation range at high Reynolds numbers.

  6. Low Energy Transfer to the Moon

    NASA Astrophysics Data System (ADS)

    Koon, W. S.; Lo, M. W.; Marsden, J. E.; Ross, S. D.

    2001-11-01

    New space missions are increasingly more complex; demand for exotic orbits to solve engineering problems has grown beyond the existing astrodynamic infrastructure based on two-body interactions. The delicate heteroclinic dynamics used by the Genesis Mission dramatically illustrate the need for a new paradigm: dynamical system study of three-body problem. Furthermore, this dynamics has much to say about the morphology and transport of materials within the Solar System. The cross-fertilization of ideas between the natural dynamics of the Solar System and applications to engineering has produced new techniques for constructing spacecraft trajectories with interesting characteristics. Specifically, these techniques are used here to produce a lunar capture mission which uses less fuel than a Hohmann transfer. We approximate the Sun-Earth-Moon-Spacecraft four-body problem as two three-body problems. Using the invariant manifold structures of the Lagrange points of the three-body systems, we are able to construct low energy transfer trajectories from the Earth which exhibit ballistic capture at the Moon. The techniques used in the design and construction of this trajectory may be applied in many situations. This is joint work with Martin W. Lo, Jerrold E. Marsden and Shane D. Ross and was partially supported by the National Science Foundation Grant No. KFI/ATM-9873133 under a contract with the Jet Propulsion Laboratory, NASA.

  7. Infrared radiative energy transfer in gaseous systems

    NASA Technical Reports Server (NTRS)

    Tiwari, Surendra N.

    1991-01-01

    Analyses and numerical procedures are presented to investigate the radiative interactions in various energy transfer processes in gaseous systems. Both gray and non-gray radiative formulations for absorption and emission by molecular gases are presented. The gray gas formulations are based on the Planck mean absorption coefficient and the non-gray formulations are based on the wide band model correlations for molecular absorption. Various relations for the radiative flux and divergence of radiative flux are developed. These are useful for different flow conditions and physical problems. Specific plans for obtaining extensive results for different cases are presented. The procedure developed was applied to several realistic problems. Results of selected studies are presented.

  8. Local energy transfer and nonlocal interactions in homogeneous, isotropic turbulence

    NASA Technical Reports Server (NTRS)

    Domaradzki, J. Andrzej; Rogallo, Robert S.

    1990-01-01

    Detailed computations were made of energy transfer among the scales of motion in incompressible turbulent fields at low Reynolds numbers, generated by direct numerical simulations. It was observed that, although the transfer resulted from triad interactions that were nonlocal in k space, the energy always transferred locally. The energy transfer calculated from the eddy-damped quasi-normal Markovian (EDQNM) theory of turbulence at low Reynolds numbers is in excellent agreement with the results of the numerical simulations. At high Reynolds numbers, the EDQNM theory predicts the same transfer mechanism in the inertial range that is observed at low Reynolds numbers.

  9. Linear energy relationships in ground state proton transfer and excited state proton-coupled electron transfer.

    PubMed

    Gamiz-Hernandez, Ana P; Magomedov, Artiom; Hummer, Gerhard; Kaila, Ville R I

    2015-02-12

    Proton-coupled electron transfer (PCET) processes are elementary chemical reactions involved in a broad range of radical and redox reactions. Elucidating fundamental PCET reaction mechanisms are thus of central importance for chemical and biochemical research. Here we use quantum chemical density functional theory (DFT), time-dependent density functional theory (TDDFT), and the algebraic diagrammatic-construction through second-order (ADC(2)) to study the mechanism, thermodynamic driving force effects, and reaction barriers of both ground state proton transfer (pT) and photoinduced proton-coupled electron transfer (PCET) between nitrosylated phenyl-phenol compounds and hydrogen-bonded t-butylamine as an external base. We show that the obtained reaction barriers for the ground state pT reactions depend linearly on the thermodynamic driving force, with a Brønsted slope of 1 or 0. Photoexcitation leads to a PCET reaction, for which we find that the excited state reaction barrier depends on the thermodynamic driving force with a Brønsted slope of 1/2. To support the mechanistic picture arising from the static potential energy surfaces, we perform additional molecular dynamics simulations on the excited state energy surface, in which we observe a spontaneous PCET between the donor and the acceptor groups. Our findings suggest that a Brønsted analysis may distinguish the ground state pT and excited state PCET processes.

  10. Energy and electron transfer in bifunctional non-conjugated dendrimers.

    PubMed

    Justin Thomas, K R; Thompson, Alexis L; Sivakumar, Aathimanikandan V; Bardeen, Christopher J; Thayumanavan, S

    2005-01-12

    Nonconjugated dendrimers, which are capable of funneling energy from the periphery to the core followed by a charge-transfer process from the core to the periphery, have been synthesized. The energy and electron donors involve a diarylaminopyrene unit and are incorporated at the periphery of these dendrimers. The energy and electron acceptor is at the core of the dendrimer, which involves a chromophore based on a benzthiadiazole moiety. The backbone of the dendrimers is benzyl ether based. A direct electron-transfer quenching of the excited state of the periphery or a sequential energy transfer-electron-transfer pathway are the two limiting mechanisms of the observed photophysical properties. We find that the latter mechanism is prevalent in these dendrimers. The energy transfer occurs on a picosecond time scale, while the charge-transfer process occurs on a nanosecond time scale. The lifetime of the charge separated species was found to be in the range of microseconds. Energy transfer efficiencies ranging from 80% to 90% were determined using both steady-state and time-resolved measurements, while charge-transfer efficiencies ranging from 70% to 80% were deduced from fluorescence quenching of the core chromophore. The dependence of the energy and charge-transfer processes on dendrimer generation is analyzed in terms of the backfolding of the flexible benzyl ether backbone, which leads to a weaker dependence of the energy and charge-transfer efficiencies on dendrimer size than would be expected for a rigid system.

  11. A review on augmentation of heat transfer in boiling using surfactants/additives

    NASA Astrophysics Data System (ADS)

    Acharya, Anil; Pise, Ashok

    2016-09-01

    Studies of heat transfer enhancement in boiling under various conditions and configurations have given different results. Understanding the boiling behaviour from these studies, literature is reviewed in terms of surface texture, heater geometry and orientation, experimental and numerical studies in presence of surfactant/additives. After understanding different behaviour in boiling, the effect of environment friendly surfactant is studied through literature review. Benchmarking of experimental procedure is done by experimenting and comparing some surfactants studied in literature.

  12. Energy transfer in nonlinear network models of proteins

    NASA Astrophysics Data System (ADS)

    Piazza, F.; Sanejouand, Y.-H.

    2009-12-01

    We investigate how nonlinearity and topological disorder affect the energy relaxation of local kicks in coarse-grained network models of proteins. We find that nonlinearity promotes long-range, coherent transfer of substantial energy to specific functional sites, while depressing transfer to generic locations. In some cases, transfer is mediated by the self-localization of discrete breathers at distant locations from the kick, acting as efficient energy-accumulating centers.

  13. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  14. Radiation energy transfer in RNA polymers

    NASA Astrophysics Data System (ADS)

    Kempner, E. S.; Salovey, R.; Bernstein, S. L.

    1996-11-01

    Ribozymes are a special class of polyribonucleotide (RNA) molecules which possess intrinsic catalytic activity, capable of cleaving nucleic acid substrates. RNA molecules were synthesized containing a hammerhead ribozyme moiety of 52 nucleotides linked to an inactive leader sequence, for total lengths of either 262 or 1226 nucleotides. These RNAs were frozen and irradiated with high energy electrons. Surviving ribozyme activity was determined, using the ability of the irradiated ribozymes to cleave a labeled substrate. From the same irradiated samples, the amount of intact RNA remaining was determined following denaturing gel electrophoresis. Radiation target analyses of these data revealed a structural target size of 80 kDa and a ribozyme activity target size of 15 kDa for the smaller ribozyme, and 319 and 16 kDa, respectively, for the larger ribozyme. The disparity in target size for activity vs structure indicates that, in contrast to proteins, there is no spread of radiation damage far from the primary site of ionization in RNA molecules. The smaller target size for activity indicates that only primary ionizations occurring in the specific active region are effective. This is similar to the case for oligosaccharides. It is concluded that the presence of the ribose sugar in the polymer chain restricts radiation damage to a small region and prevents major energy transfer throughout the molecule.

  15. Direct contact heat transfer for thermal energy storage

    SciTech Connect

    Wright, J. D.

    1980-11-01

    Direct contact heat exchange offers the potential for increased efficiency and lower heat transfer costs in a variety of thermal energy storage sytems. SERI models of direct contact heat transfer based on literature information have identified dispersed phase drop size, the mechanism of heat transfer within the drop, and dispersed phase holdup as the parameters controlling direct contact system performance. However, current information is insufficient to predict these factors a priori. Therefore, tests have been defined and equipment constructed to provide independent determination of drop size, heat transfer mechanism, and hold up. In experiments with heptane dispersed in water, the equation of Kagen et. al. was found to most closely predict the drop size. The velocity at which drop formation changes from dropwise to jetting was overpredicted by all literature correlations. Further experiments are needed to conclusively determine whether the salt in a salt hydrate melt acts to block internal circulation. In addition, the potential of low temperature oil/salt hydrate latent heat storage systems is being evaluated in the laboratory.

  16. Evidence that Additions of Grignard Reagents to Aliphatic Aldehydes Do Not Involve Single-Electron-Transfer Processes.

    PubMed

    Otte, Douglas A L; Woerpel, K A

    2015-08-01

    Addition of allylmagnesium reagents to an aliphatic aldehyde bearing a radical clock gave only addition products and no evidence of ring-opened products that would suggest single-electron-transfer reactions. The analogous Barbier reaction also did not provide evidence for a single-electron-transfer mechanism in the addition step. Other Grignard reagents (methyl-, vinyl-, t-Bu-, and triphenylmethylmagnesium halides) also do not appear to add to an alkyl aldehyde by a single-electron-transfer mechanism. PMID:26214553

  17. Luminescence energy transfer using a terbium chelate: Improvements on fluorescence energy transfer

    SciTech Connect

    Selvin, P.R.; Hearst, J.E.

    1994-10-11

    The authors extend the technique of fluorescence resonance energy transfer (FRET) by introducing a luminescent terbium chelate as a donor and an organic dye, tetramethylrhodamine, as an acceptor. The results are consistent with a Foerster theory of energy transfer, provided the appropriate parameters are used. The use of lanthanide donors in general, and this pair in particular, has many advantages over more conventional FRET pairs, which rely solely on organic dyes. The distance at which 50% energy transfer occurs is large, 65 {angstrom}; the donor lifetime is a single exponential and long (millisecond), making lifetime measurements facile and accurate. Uncertainty in the orientation factor, which creates uncertainty in measured distances, is minimized by the donor`s multiple electronic transitions and long lifetime. The sensitized emission of the acceptor can be measured with little or no interfering background, yielding a >25-fold improvement in the signal-to-background ratio over standard donor-acceptor pairs. These improvements are expected to make distances >100 {angstrom} measurable via FRET. The authors also report measurement of the sensitized emission lifetime, a measurement that is completely insensitive to total concentration and incomplete labeling.

  18. A bifurcated molecular pentad capable of sequential electronic energy transfer and intramolecular charge transfer.

    PubMed

    Harriman, Anthony; Stachelek, Patrycja; Sutter, Alexandra; Ziessel, Raymond

    2015-10-21

    An extended molecular array, comprising three distinct types of chromophores and two additional redox-active subunits, that harvests photons over most of the visible spectral range has been synthesized and characterised. The array exhibits a rich variety of electrochemical waves when examined by cyclic voltammetry but assignment can be made on the basis of control compounds and molecular orbital calculations. Stepwise electronic energy transfer occurs along the molecular axis, corresponding to a gradient of excitation energies, to populate the lowest-energy excited state of the ultimate acceptor. The latter species, which absorbs and emits in the far-red region, enters into light-induced charge transfer with a terminal amine group. The array is relatively stable under illumination with white light but degrades slowly via a series of well-defined steps, the first of which is autocatalytic. One of the main attributes of this system is the capability to harvest an unusually high fraction of sunlight while providing protection against exposure to UV light.

  19. Incrementality and additionality: A new dimension to North-South resource transfers

    SciTech Connect

    Jordan, A. . School of Environmental Sciences); Werksman, J. . Foundation for International Environmental Law and Development)

    1994-06-01

    In the last four years, incrementality'' and additionality'' have emerged as new terms in the evolving lexicon of international environmental diplomacy. As Parties to the Conventions on Climate Change, Biodiversity and the Ozone Layer, industrialized states undertake to provide sufficient additional resources (the principle of additionality) to meet the incremental cost (the concept of incrementality) of measures undertaken by the developing countries to tackle global environmental problems. Issues of incrementality and additionality go to the heart of a much deeper and highly contentious debate on who should pay the costs of responding to global environmental problems; on how the payment should be made; on which agency or agencies should manage the transfers; and upon which parties should be compensated. Every sign is that if the overall North to South transfer breaks down or is retarded, then the process of implementing the aforementioned agreements may be jeopardized. This paper reviews the emergency of the two terms in international environmental politics; it pinpoints the theoretical and practical difficulties of defining and implementing them; and it assesses whether these difficulties and conflicts of opinion may, in some manner, be resolved.

  20. Targeting Low-Energy Transfers to Low Lunar Orbit

    NASA Technical Reports Server (NTRS)

    Parker, Jeffrey S.; Anderson, Rodney L.

    2011-01-01

    A targeting scheme is presented to build trajectories from a specified Earth parking orbit to a specified low lunar orbit via a low-energy transfer and up to two maneuvers. The total transfer delta V (velocity) is characterized as a function of the Earth parking orbit inclination and the departure date for transfers to each given low lunar orbit. The transfer delta V (velocity) cost is characterized for transfers constructed to low lunar polar orbits with any longitude of ascending node and for transfers that arrive at the Moon at any given time during a month.

  1. Heat transfer and material flow during laser assisted multi-layer additive manufacturing

    SciTech Connect

    Manvatkar, V.; De, A.; DebRoy, T.

    2014-09-28

    A three-dimensional, transient, heat transfer, and fluid flow model is developed for the laser assisted multilayer additive manufacturing process with coaxially fed austenitic stainless steel powder. Heat transfer between the laser beam and the powder particles is considered both during their flight between the nozzle and the growth surface and after they deposit on the surface. The geometry of the build layer obtained from independent experiments is compared with that obtained from the model. The spatial variation of melt geometry, cooling rate, and peak temperatures is examined in various layers. The computed cooling rates and solidification parameters are used to estimate the cell spacings and hardness in various layers of the structure. Good agreement is achieved between the computed geometry, cell spacings, and hardness with the corresponding independent experimental results.

  2. Nonlinear Energy Transfer in Solar Magnetic Loops

    NASA Astrophysics Data System (ADS)

    Gomez, Daniel O.; Deluca, Edward E.; McClymont, Alexander N.

    1995-08-01

    Active region coronal loops are widely believed to be heated by ohmic dissipation of field-aligned electric currents. These currents are driven by turbulent photospheric motions which twist and shear the magnetic footpoints of loops. Fine-scale structure in the corona is required in order to dissipate the currents rapidly enough to account for coronal heating. A long-standing controversy surrounds the question: is the fine-scale filamentation the result of magnetohydrodynamic (MHD) instabilities, or of dynamical nonequilibrium, or is it merely the direct product of the turbulent footpoint motions themselves? We present a simple model for the evolution of the coronal magnetic field, with no fine-scale structure in the imposed footpoint motions. The model consists of a three-mode truncation of the "reduced" MHD equations. One mode is driven by a stationary velocity field at the footpoints; the other two modes, of different spatial frequencies, are amplified through interaction with the driven mode. After approximately one photospheric turnover time, the coronal field loses equilibrium, and evolves rapidly to a new configuration, transferring energy to the two non-driven modes. The timescale of rapid nonequilibrium evolution is (tAtp)½, where tA is the Alfvén transit time along the loop and tp is the photospheric turnover time. Regarding this simple model as a building block of a much more complex process, we see that dynamical nonequilibrium should be able to produce a cascade of free energy to fine spatial scales where it can be dissipated rapidly enough to account for coronal heating, as envisioned by Parker.

  3. Transferability of regional permafrost disturbance susceptibility modelling using generalized linear and generalized additive models

    NASA Astrophysics Data System (ADS)

    Rudy, Ashley C. A.; Lamoureux, Scott F.; Treitz, Paul; van Ewijk, Karin Y.

    2016-07-01

    To effectively assess and mitigate risk of permafrost disturbance, disturbance-prone areas can be predicted through the application of susceptibility models. In this study we developed regional susceptibility models for permafrost disturbances using a field disturbance inventory to test the transferability of the model to a broader region in the Canadian High Arctic. Resulting maps of susceptibility were then used to explore the effect of terrain variables on the occurrence of disturbances within this region. To account for a large range of landscape characteristics, the model was calibrated using two locations: Sabine Peninsula, Melville Island, NU, and Fosheim Peninsula, Ellesmere Island, NU. Spatial patterns of disturbance were predicted with a generalized linear model (GLM) and generalized additive model (GAM), each calibrated using disturbed and randomized undisturbed locations from both locations and GIS-derived terrain predictor variables including slope, potential incoming solar radiation, wetness index, topographic position index, elevation, and distance to water. Each model was validated for the Sabine and Fosheim Peninsulas using independent data sets while the transferability of the model to an independent site was assessed at Cape Bounty, Melville Island, NU. The regional GLM and GAM validated well for both calibration sites (Sabine and Fosheim) with the area under the receiver operating curves (AUROC) > 0.79. Both models were applied directly to Cape Bounty without calibration and validated equally with AUROC's of 0.76; however, each model predicted disturbed and undisturbed samples differently. Additionally, the sensitivity of the transferred model was assessed using data sets with different sample sizes. Results indicated that models based on larger sample sizes transferred more consistently and captured the variability within the terrain attributes in the respective study areas. Terrain attributes associated with the initiation of disturbances were

  4. Nanoparticle energy transfer on the cell surface.

    PubMed

    Bene, László; Szentesi, Gergely; Mátyus, László; Gáspár, Rezso; Damjanovich, Sándor

    2005-01-01

    Membrane topology of receptors plays an important role in shaping transmembrane signalling of cells. Among the methods used for characterizing receptor clusters, fluorescence resonance energy transfer between a donor and acceptor fluorophore plays a unique role based on its capability of detecting molecular level (2-10 nm) proximities of receptors in physiological conditions. Recent development of biotechnology has made possible the usage of colloidal gold particles in a large size range for specific labelling of cells for the purposes of electron microscopy. However, by combining metal and fluorophore labelling of cells, the versatility of metal-fluorophore interactions opens the way for new applications by detecting the presence of the metal particles by the methods of fluorescence spectroscopy. An outstanding feature of the metal nanoparticle-fluorophore interaction is that the metal particle can enhance spontaneous emission of the fluorophore in a distance-dependent fashion, in an interaction range essentially determined by the size of the nanoparticle. In our work enhanced fluorescence of rhodamine and cyanine dyes was observed in the vicinity of immunogold nanoparticles on the surface of JY cells in a flow cytometer. The dyes and the immunogold were targetted to the cell surface receptors MHCI, MHCII, transferrin receptor and CD45 by monoclonal antibodies. The fluorescence enhancement was sensitive to the wavelength of the exciting light, the size and amount of surface bound gold beads, as well as the fluorophore-nanoparticle distance. The intensity of 90 degrees scattering of the incident light beam was enhanced by the immunogold in a concentration and size-dependent fashion. The 90 degrees light scattering varied with the wavelength of the incident light in a manner characteristic to gold nanoparticles of the applied sizes. A reduction in photobleaching time constant of the cyanine dye was observed in the vicinity of gold particles in a digital imaging

  5. Detecting Plasmon Resonance Energy Transfer with Differential Interference Contrast Microscopy

    SciTech Connect

    Augspurger, Ashley E.; Stender, Anthony S.; Han, Rui; Fang, Ning

    2013-12-30

    Gold nanoparticles are ideal probes for studying intracellular environments and energy transfer mechanisms due to their plasmonic properties. Plasmon resonance energy transfer (PRET) relies on a plasmonic nanoparticle to donate energy to a nearby resonant acceptor molecule, a process which can be observed due to the plasmonic quenching of the donor nanoparticle. In this study, a gold nanosphere was used as the plasmonic donor, while the metalloprotein cytochrome c was used as the acceptor molecule. Differential interference contrast (DIC) microscopy allows for simultaneous monitoring of complex environments and noble metal nanoparticles in real time. Using DIC and specially designed microfluidic channels, we were able to monitor PRET at the single gold particle level and observe the reversibility of PRET upon the introduction of phosphate-buffered saline to the channel. In an additional experiment, single gold particles were internalized by HeLa cells and were subsequently observed undergoing PRET as the cell hosts underwent morphological changes brought about by ethanol-induced apoptosis.

  6. [INVITED] Laser-induced forward transfer: A high resolution additive manufacturing technology

    NASA Astrophysics Data System (ADS)

    Delaporte, Philippe; Alloncle, Anne-Patricia

    2016-04-01

    Among the additive manufacturing techniques, laser-induced forward transfer addresses the challenges of printing thin films in solid phase or small volume droplets in liquid phase with very high resolution. This paper reviews the physics of this process and explores the pros and cons of this technology versus other digital printing technologies. The main field of applications are printed electronics, organic electronics and tissue engineering, and the most promising short terms ones concern digital laser printing of sensors and conductive tracks. Future directions and emerging areas of interest are discussed such as printing solid from a liquid phase and 3D digital nanomanufacturing.

  7. Visual prosthesis wireless energy transfer system optimal modeling

    PubMed Central

    2014-01-01

    Background Wireless energy transfer system is an effective way to solve the visual prosthesis energy supply problems, theoretical modeling of the system is the prerequisite to do optimal energy transfer system design. Methods On the basis of the ideal model of the wireless energy transfer system, according to visual prosthesis application condition, the system modeling is optimized. During the optimal modeling, taking planar spiral coils as the coupling devices between energy transmitter and receiver, the effect of the parasitic capacitance of the transfer coil is considered, and especially the concept of biological capacitance is proposed to consider the influence of biological tissue on the energy transfer efficiency, resulting in the optimal modeling’s more accuracy for the actual application. Results The simulation data of the optimal model in this paper is compared with that of the previous ideal model, the results show that under high frequency condition, the parasitic capacitance of inductance and biological capacitance considered in the optimal model could have great impact on the wireless energy transfer system. The further comparison with the experimental data verifies the validity and accuracy of the optimal model proposed in this paper. Conclusions The optimal model proposed in this paper has a higher theoretical guiding significance for the wireless energy transfer system’s further research, and provide a more precise model reference for solving the power supply problem in visual prosthesis clinical application. PMID:24428906

  8. Energy transfer and photochemistry in biomimetic solar conversion

    NASA Astrophysics Data System (ADS)

    Boxer, Steven G.

    1989-09-01

    The research program developed methods for studying electron transfer reactions and electron transfer in biomimetic solar energy systems. Over the course of the project results were obtained in several areas. The distance and orientation dependence of energy transfer were measured quantitatively in a completely defined 3-D array of chromophores. Synthetic methods were developed for covalently modifying DNA bases with electron donors and acceptors. Electric field effects were measured on the absorption and emission of photosynthetic systems. This led to the development of a general method for modulating electron transfer reactions in electric fields. Applications of this method to transition metal complexes were developed for the first time.

  9. Energy efficiency standards for residential and commercial equipment: Additional opportunities

    SciTech Connect

    Rosenquist, Greg; McNeil, Michael; Iyer, Maithili; Meyers, Steve; McMahon, Jim

    2004-08-02

    Energy efficiency standards set minimum levels of energy efficiency that must be met by new products. Depending on the dynamics of the market and the level of the standard, the effect on the market for a given product may be small, moderate, or large. Energy efficiency standards address a number of market failures that exist in the buildings sector. Decisions about efficiency levels often are made by people who will not be responsible for the energy bill, such as landlords or developers of commercial buildings. Many buildings are occupied for their entire lives by very temporary owners or renters, each unwilling to make long-term investments that would mostly reward subsequent users. And sometimes what looks like apathy about efficiency merely reflects inadequate information or time invested to evaluate it. In addition to these sector-specific market failures, energy efficiency standards address the endemic failure of energy prices to incorporate externalities. In the U.S., energy efficiency standards for consumer products were first implemented in California in 1977. National standards became effective starting in 1988. By the end of 2001, national standards were in effect for over a dozen residential appliances, as well as for a number of commercial sector products. Updated standards will take effect in the next few years for several products. Outside the U.S., over 30 countries have adopted minimum energy performance standards. Technologies and markets are dynamic, and additional opportunities to improve energy efficiency exist. There are two main avenues for extending energy efficiency standards. One is upgrading standards that already exist for specific products. The other is adopting standards for products that are not covered by existing standards. In the absence of new and upgraded energy efficiency standards, it is likely that many new products will enter the stock with lower levels of energy efficiency than would otherwise be the case. Once in the stock

  10. A planning framework for transferring building energy technologies

    SciTech Connect

    Farhar, B C; Brown, M A; Mohler, B L; Wilde, M; Abel, F H

    1990-07-01

    Accelerating the adoption of new and existing cost-effective technologies has significant potential to reduce the energy consumed in US buildings. This report presents key results of an interlaboratory technology transfer planning effort in support of the US Department of Energy's Office of Building Technologies (OBT). A guiding assumption for planning was that OBT's R D program should forge linkages with existing programs whose goals involved enhancing energy efficiency in buildings. An ad hoc Technology Transfer Advisory Group reviewed the existing analysis and technology transfer program, brainstormed technology transfer approaches, interviewed DOE program managers, identified applicable research results, and developed a framework that management could use in deciding on the best investments of technology transfer resources. Representatives of 22 organizations were interviewed on their views of the potential for transferring energy efficiency technologies through active linking with OBT. The report describes these programs and interview results; outlines OBT tools, technologies, and practices to be transferred; defines OBT audiences; identifies technology transfer functions and presents a framework devised using functions and audiences; presents some 60 example technology transfer activities; and documents the Advisory Group's recommendations. 37 refs., 3 figs., 12 tabs.

  11. A fluorescence resonance energy transfer activation sensor for Arf6.

    PubMed

    Hall, Brian; McLean, Mark A; Davis, Kathryn; Casanova, James E; Sligar, Steven G; Schwartz, Martin A

    2008-03-15

    The involvement of the small GTPase Arf6 in Rac activation, cell migration, and cancer invasiveness suggests that it is activated in a spatially and temporally regulated manner. Small GTPase activation has been imaged in cells using probes in which the GTPase and a fragment of a downstream effector protein are fused to fluorescent reporter proteins that constitute a fluorescence resonance energy transfer (FRET) donor/acceptor pair. Unlike other Ras family GTPases, the N terminus of Arf6 is critical for membrane targeting and, thus, cannot be modified by fusion to a fluorescent protein. We found that the previously described C-terminal green fluorescent protein (GFP) derivative also shows diminished membrane targeting. Therefore, we inserted a fluorescent protein into an inert loop within the Arf6 sequence. This fusion showed normal membrane targeting, nucleotide-dependent interaction with the downstream effector GGA3, and normal regulation by a GTPase-activating protein (GAP) and a guanine nucleotide exchange factor (GEF). Using the recently developed CyPET/YPET fluorescent proteins as a FRET pair, we found that Arf6-CyPET underwent efficient energy transfer when bound to YPET-GGA3 effector domain in intact cells. The addition of platelet-derived growth factor (PDGF) to fibroblasts triggered a rapid and transient increase in FRET, indicative of Arf6 activation. These reagents should be useful for investigations of Arf6 activation and function.

  12. An ultra-efficient energy transfer beyond plasmonic light scattering

    SciTech Connect

    Fu, Sze-Ming; Zhong, Yan-Kai; Lin, Albert

    2014-11-14

    The energy transfer between nano-particles is of great importance for, solar cells, light-emitting diodes, nano-particle waveguides, and other photonic devices. This study shows through novel design and algorithm optimization, the energy transfer efficiency between plasmonic and dielectric nano-particles can be greatly improved. Using versatile designs including core-shell wrapping, supercells and dielectric mediated plasmonic scattering, 0.05 dB/μm attenuation can be achieved, which is 20-fold reduction over the baseline plasmonic nano-particle chain, and 8-fold reduction over the baseline dielectric nano-particle chain. In addition, it is also found that the dielectric nano-particle chains can actually be more efficient than the plasmonic ones, at their respective optimized geometry. The underlying physics is that although plasmonic nano-particles provide stronger coupling and field emission, the effect of plasmonic absorption loss is actually more dominant resulting in high attenuation. Finally, the group velocity for all design schemes proposed in this work is shown to be maintained above 0.4c, and it is found that the geometry optimization for transmission also boosts the group velocity.

  13. Investigation of energy transfer in terbium doped Y 2SiO5 phosphor particles

    NASA Astrophysics Data System (ADS)

    Salis, M.; Carbonaro, C. M.; Corpino, R.; Anedda, A.; Ricci, P. C.

    2012-07-01

    The kinetics of luminescence of sol-gel synthesized terbium doped Y 2SiO5 (YSO) phosphor particles is investigated in detail with reference to Tb concentration in the 0.001%-10% range. By increasing the dopant concentration, the luminescence profile changes from a blue to a green peaked emission spectrum because of the energy transfer among centers. The inter-center energy transfer mechanism is well accounted for by the Inokuti-Hirayama (IH) kinetic model which is based on a statistical average of inter-center distance dependent decay modes of the donor luminescence. The distribution of the decay modes is implemented from the Förster-Dexter resonance theory of energy transfer by assuming a rate constant for the energy transfer by multipolar interactions between donors and acceptors. However, the experimental results recorded in the low concentration limit show the presence of green emission contributions in the luminescence spectrum which cannot be related to the Tb concentration; for this reason an additional internal energy transfer mechanism, occurring among levels of the same center, is proposed to account for the recorded emission properties. Thus, a new and more exhaustive model which includes both the internal and external energy transfer processes is considered; the proposed model allows a better explanation of the spectroscopic features of Tb related centers in YSO crystals and discloses the critical concentration and the quantum yields of the different energy transfer mechanisms.

  14. Energy transfer performance of mechanical nanoresonators coupled with electromagnetic fields

    PubMed Central

    2012-01-01

    We study the energy transfer performance in electrically and magnetically coupled mechanical nanoresonators. Using the resonant scattering theory, we show that magnetically coupled resonators can achieve the same energy transfer performance as for their electrically coupled counterparts or even outperform them within the scale of interest. Magnetic and electric coupling are compared in the nanotube radio, a realistic example of a nano-scale mechanical resonator. The energy transfer performance is also discussed for a newly proposed bio-nanoresonator composed of magnetosomes coated with a net of protein fibers. PMID:23075029

  15. Energy transfer between a biological labelling dye and gold nanorods

    NASA Astrophysics Data System (ADS)

    Racknor, Chris; Singh, Mahi R.; Zhang, Yinan; Birch, David J. S.; Chen, Yu

    2014-03-01

    We have demonstrated energy transfer between a biological labelling dye (Alexa Fluor 405) and gold nanorods experimentally and theoretically. The fluorescence lifetime imaging microscopy and density matrix method are used to study a hybrid system of dye and nanorods under one- and two-photon excitations. Energy transfer between dye and nanorods via the dipole-dipole interaction is found to cause a decrease in the fluorescence lifetime change. Enhanced energy transfer from dye to nanorods is measured in the presence of an increased density of nanorods. This study has potential applications in fluorescence lifetime-based intra-cellular sensing of bio-analytes as well as nuclear targeting cancer therapy.

  16. Energy Transfer and Triadic Interactions in Compressible Turbulence

    NASA Technical Reports Server (NTRS)

    Bataille, F.; Zhou, Ye; Bertoglio, Jean-Pierre

    1997-01-01

    Using a two-point closure theory, the Eddy-Damped-Quasi-Normal-Markovian (EDQNM) approximation, we have investigated the energy transfer process and triadic interactions of compressible turbulence. In order to analyze the compressible mode directly, the Helmholtz decomposition is used. The following issues were addressed: (1) What is the mechanism of energy exchange between the solenoidal and compressible modes, and (2) Is there an energy cascade in the compressible energy transfer process? It is concluded that the compressible energy is transferred locally from the solenoidal part to the compressible part. It is also found that there is an energy cascade of the compressible mode for high turbulent Mach number (M(sub t) greater than or equal to 0.5). Since we assume that the compressibility is weak, the magnitude of the compressible (radiative or cascade) transfer is much smaller than that of solenoidal cascade. These results are further confirmed by studying the triadic energy transfer function, the most fundamental building block of the energy transfer.

  17. Spectral kinetic energy transfer in turbulent premixed reacting flows.

    PubMed

    Towery, C A Z; Poludnenko, A Y; Urzay, J; O'Brien, J; Ihme, M; Hamlington, P E

    2016-05-01

    Spectral kinetic energy transfer by advective processes in turbulent premixed reacting flows is examined using data from a direct numerical simulation of a statistically planar turbulent premixed flame. Two-dimensional turbulence kinetic-energy spectra conditioned on the planar-averaged reactant mass fraction are computed through the flame brush and variations in the spectra are connected to terms in the spectral kinetic energy transport equation. Conditional kinetic energy spectra show that turbulent small-scale motions are suppressed in the burnt combustion products, while the energy content of the mean flow increases. An analysis of spectral kinetic energy transfer further indicates that, contrary to the net down-scale transfer of energy found in the unburnt reactants, advective processes transfer energy from small to large scales in the flame brush close to the products. Triadic interactions calculated through the flame brush show that this net up-scale transfer of energy occurs primarily at spatial scales near the laminar flame thermal width. The present results thus indicate that advective processes in premixed reacting flows contribute to energy backscatter near the scale of the flame.

  18. Spectral kinetic energy transfer in turbulent premixed reacting flows

    NASA Astrophysics Data System (ADS)

    Towery, C. A. Z.; Poludnenko, A. Y.; Urzay, J.; O'Brien, J.; Ihme, M.; Hamlington, P. E.

    2016-05-01

    Spectral kinetic energy transfer by advective processes in turbulent premixed reacting flows is examined using data from a direct numerical simulation of a statistically planar turbulent premixed flame. Two-dimensional turbulence kinetic-energy spectra conditioned on the planar-averaged reactant mass fraction are computed through the flame brush and variations in the spectra are connected to terms in the spectral kinetic energy transport equation. Conditional kinetic energy spectra show that turbulent small-scale motions are suppressed in the burnt combustion products, while the energy content of the mean flow increases. An analysis of spectral kinetic energy transfer further indicates that, contrary to the net down-scale transfer of energy found in the unburnt reactants, advective processes transfer energy from small to large scales in the flame brush close to the products. Triadic interactions calculated through the flame brush show that this net up-scale transfer of energy occurs primarily at spatial scales near the laminar flame thermal width. The present results thus indicate that advective processes in premixed reacting flows contribute to energy backscatter near the scale of the flame.

  19. Spectral Energy Transfer and Dissipation of Magnetic Energy from Fluid to Kinetic Scales

    SciTech Connect

    Bowers, K.; Li, H.

    2007-01-19

    We investigate the magnetic energy transfer from the fluid to kinetic scales and dissipation processes using three-dimensional fully kinetic particle-in-cell plasma simulations. The nonlinear evolution of a sheet pinch is studied where we show that it exhibits both fluid scale global relaxation and kinetic scale collisionless reconnection at multiple resonant surfaces. The interactions among collisionless tearing modes destroy the original flux surfaces and produce stochastic fields, along with generating sheets and filaments of intensified currents. In addition, the magnetic energy is transferred from the original shear length scale both to the large scales due to the global relaxation and to the smaller, kinetic scales for dissipation. The dissipation is dominated by the thermal or pressure effect in the generalized Ohm's law, and electrons are preferentially accelerated.

  20. INTRAMOLECULAR CHARGE AND ENERGY TRANSFER IN MULTICHROMOPHORIC AROMATIC SYSTEMS

    SciTech Connect

    Edward C. Lim

    2008-09-09

    A concerted experimental and computational study of energy transfer in nucleic acid bases and charge transfer in dialkylaminobenzonitriles, and related electron donor-acceptor molecules, indicate that the ultrafast photoprocesses occur through three-state conical interactions involving an intermediate state of biradical character.

  1. Energy efficient building design. A transfer guide for local governments

    SciTech Connect

    Not Available

    1992-03-01

    The fundamental concepts of the building design process, energy codes and standards, and energy budgets are introduced. These tools were combined into Energy Design Guidelines and design contract requirements. The Guidelines were repackaged for a national audience and a videotape for selling the concept to government executives. An effort to test transfer of the Guidelines to outside agencies is described.

  2. Fluorescence and energy transfer of tryptophans in Aplysia myoglobin.

    PubMed Central

    Janes, S M; Holtom, G; Ascenzi, P; Brunori, M; Hochstrasser, R M

    1987-01-01

    The fluorescence decay of tryptophan residues in apo and met Aplysia limacina myoglobin and sperm whale myoglobin were measured in aqueous solution at 10 degrees-15 degrees C. In all species, multiexponential behavior was observed in which the individual components displayed unique frequency-dependent emission characteristics. The results suggest that the tryptophan fluorescence in all met samples are quenched by rapid Forster energy transfer to the heme as predicted from the crystal geometry. Fluorescence from the apo protein is similar to that in solutions of free tryptophans. In addition, the fluorescence properties of the reversible thermal denaturation of Aplysia limacina met myoglobin was investigated between 25 degrees and 75 degrees C. PMID:3580491

  3. Energy Transfer and a Recurring Mathematical Function

    ERIC Educational Resources Information Center

    Atkin, Keith

    2013-01-01

    This paper extends the interesting work of a previous contributor concerning the analogies between physical phenomena such as mechanical collisions and the transfer of power in an electric circuit. Emphasis is placed on a mathematical function linking these different areas of physics. This unifying principle is seen as an exciting opportunity to…

  4. Shishiodoshi unidirectional energy transfer mechanism in phenylene ethynylene dendrimers.

    PubMed

    Fernandez-Alberti, S; Roitberg, Adrian E; Kleiman, Valeria D; Nelson, T; Tretiak, S

    2012-12-14

    Non-adiabatic excited-state molecular dynamics is used to study the ultrafast intramolecular energy transfer between two-, three-, and four-ring linear polyphenylene ethynylene chromophore units linked through meta-substitutions. Twenty excited-state electronic energies, with their corresponding gradients and nonadiabatic coupling vectors were included in the simulations. The initial laser excitation creates an exciton delocalized between the different absorbing two-ring linear PPE units. Thereafter, we observe an ultrafast directional change in the spatial localization of the transient electronic transition density. The analysis of the intramolecular flux of the transition density shows a sequential through-bond two-ring→three-ring→four-ring transfer as well as an effective through-space direct two-to-four ring transfer. The vibrational excitations of C≡C stretching motions change according to that. Finally, a mechanism of unidirectional energy transfer is presented based on the variation of the energy gaps between consecutive electronic excited states in response to the intramolecular flux of the transition density. The mechanism resembles a Shishiodoshi Japanese bamboo water fountain where, once the electronic population has been transferred to the state directly below in energy, the two states decouple thereby preventing energy transfer in the opposite direction. PMID:23249063

  5. Fluorescence resonant energy transfer in the optical near field

    SciTech Connect

    Colas des Francs, Gerard; Girard, Christian; Martin, Olivier J.F.

    2003-05-01

    We develop a versatile theoretical framework for the study of fluorescence resonant energy transfer (FRET, or Foerster transfer) in complex environments, under arbitrary illumination, including optical near fields. By combining the field-susceptibility formalism with the optical Bloch equations method, we derive general equations for the computation of the energy transfer between pairs of donor-acceptor molecules excited by optical near fields and placed in a complex geometry. This approach allows accounting for both the variations of the molecular population rates and the influence of the environment. Several examples illustrate the ability of the technique to analyze recent FRET experiments performed in the optical near field.

  6. Engineering Efficient Exciton Energy Transfer in Artificial Arrays

    NASA Astrophysics Data System (ADS)

    Vogt, Leslie; Perdomo, Alejandro; Saikin, Semion; Aspuru-Guzik, Alan

    2009-03-01

    A critical component of light harvesting devices is efficient transfer of excitonic energy. Biological systems have optimized this process over time for the particular molecular components involved. Understanding this energy transfer in model arrays will allow us to engineer new materials for solar cell technology. In particular, we explore a perturbative approach to optimize both coherent and incoherent transport in small arrays. By following the evolving coherences and populations over time using a density matrix formalism, we gain an intuition about the importance of coherent processes in exciton transfer in natural and designed light harvesting systems.

  7. Energy transfer simulation for radiantly heated and cooled enclosures

    SciTech Connect

    Chapman, K.S.; Zhang, P.

    1996-11-01

    This paper presents the development of a three-dimensional mathematical model to compute heat transfer within a radiantly heated or cooled room, which then calculates the mass-averaged room air temperature and the wall surface temperature distributions. The radiation formulation used in the model accommodates arbitrary placement of walls and objects within the room. The convection model utilizes Nusselt number correlations published in the open literature. The complete energy transfer model is validated by comparing calculated room temperatures to temperatures measured in a radiantly heated room. This three-dimensional model may be applied to a building to assist the heating/cooling system design engineer in sizing a radiant heating/cooling system. By coupling this model with a thermal comfort model, the comfort levels throughout the room can be easily and efficiently mapped for a given radiant heater/cooler location. In addition, obstacles such as airplanes, trucks, furniture, and partitions can be easily incorporated to determine their effect on the radiant heating system performance.

  8. Energy transfer and energy absorption in photon interactions with matter revisited: A step-by-step illustrated approach

    NASA Astrophysics Data System (ADS)

    Abdel-Rahman, W.; Podgorsak, E. B.

    2010-05-01

    A clear understanding of energy transfer and energy absorption in photon interactions with matter is essential for the understanding of radiation dosimetry and development of new dosimetry techniques. The concepts behind the two quantities have been enunciated many years ago and described in many scientific papers, review articles, and textbooks. Data dealing with energy transfer and energy absorption as well as the associated mass energy transfer coefficient and the mass energy absorption coefficient are readily available in web-based tabular forms. However, tables, even when available in detailed and easy to access form, do not lend themselves to serve as visual aid to promote better understanding of the dosimetric quantities related to energy transfer and energy absorption as well as their relationship to the photon energy and absorber atomic number. This paper uses graphs and illustrations, in addition to well-known mathematical relationships, to guide the reader in a systematic manner through the various stages involved in the derivation of energy absorbed in medium and its associated quantity, the mass energy absorption coefficient, from the mass attenuation coefficient.

  9. Ligand reorganization and activation energies in nonadiabatic electron transfer reactions

    NASA Astrophysics Data System (ADS)

    Zhu, Jianjun; Wang, Jianji; Stell, George

    2006-10-01

    The activation energy and ligand reorganization energy for nonadiabatic electron transfer reactions in chemical and biological systems are investigated in this paper. The free energy surfaces and the activation energy are derived exactly in the general case in which the ligand vibration frequencies are not equal. The activation energy is derived by free energy minimization at the transition state. Our formulation leads to the Marcus-Hush [J. Chem. Phys. 24, 979 (1956); 98, 7170 (1994); 28, 962 (1958)] results in the equal-frequency limit and also generalizes the Marcus-Sumi [J. Chem. Phys. 84, 4894 (1986)] model in the context of studying the solvent dynamic effect on electron transfer reactions. It is found that when the ligand vibration frequencies are different, the activation energy derived from the Marcus-Hush formula deviates by 5%-10% from the exact value. If the reduced reorganization energy approximation is introduced in the Marcus-Hush formula, the result is almost exact.

  10. Proton-Coupled Electron Transfer Reactions with Photometric Bases Reveal Free Energy Relationships for Proton Transfer.

    PubMed

    Eisenhart, Thomas T; Howland, William C; Dempsey, Jillian L

    2016-08-18

    The proton-coupled electron transfer (PCET) oxidation of p-aminophenol in acetonitrile was initiated via stopped-flow rapid-mixing and spectroscopically monitored. For oxidation by ferrocenium in the presence of 7-(dimethylamino)quinoline proton acceptors, both the electron transfer and proton transfer components could be optically monitored in the visible region; the decay of the ferrocenium absorbance is readily monitored (λmax = 620 nm), and the absorbance of the 2,4-substituted 7-(dimethylamino)quinoline derivatives (λmax = 370-392 nm) red-shifts substantially (ca. 70 nm) upon protonation. Spectral analysis revealed the reaction proceeds via a stepwise electron transfer-proton transfer process, and modeling of the kinetics traces monitoring the ferrocenium and quinolinium signals provided rate constants for elementary proton and electron transfer steps. As the pKa values of the conjugate acids of the 2,4-R-7-(dimethylamino)quinoline derivatives employed were readily tuned by varying the substituents at the 2- and 4-positions of the quinoline backbone, the driving force for proton transfer was systematically varied. Proton transfer rate constants (kPT,2 = (1.5-7.5) × 10(8) M(-1) s(-1), kPT,4 = (0.55-3.0) × 10(7) M(-1) s(-1)) were found to correlate with the pKa of the conjugate acid of the proton acceptor, in agreement with anticipated free energy relationships for proton transfer processes in PCET reactions. PMID:27500804

  11. Proton-Coupled Electron Transfer Reactions with Photometric Bases Reveal Free Energy Relationships for Proton Transfer.

    PubMed

    Eisenhart, Thomas T; Howland, William C; Dempsey, Jillian L

    2016-08-18

    The proton-coupled electron transfer (PCET) oxidation of p-aminophenol in acetonitrile was initiated via stopped-flow rapid-mixing and spectroscopically monitored. For oxidation by ferrocenium in the presence of 7-(dimethylamino)quinoline proton acceptors, both the electron transfer and proton transfer components could be optically monitored in the visible region; the decay of the ferrocenium absorbance is readily monitored (λmax = 620 nm), and the absorbance of the 2,4-substituted 7-(dimethylamino)quinoline derivatives (λmax = 370-392 nm) red-shifts substantially (ca. 70 nm) upon protonation. Spectral analysis revealed the reaction proceeds via a stepwise electron transfer-proton transfer process, and modeling of the kinetics traces monitoring the ferrocenium and quinolinium signals provided rate constants for elementary proton and electron transfer steps. As the pKa values of the conjugate acids of the 2,4-R-7-(dimethylamino)quinoline derivatives employed were readily tuned by varying the substituents at the 2- and 4-positions of the quinoline backbone, the driving force for proton transfer was systematically varied. Proton transfer rate constants (kPT,2 = (1.5-7.5) × 10(8) M(-1) s(-1), kPT,4 = (0.55-3.0) × 10(7) M(-1) s(-1)) were found to correlate with the pKa of the conjugate acid of the proton acceptor, in agreement with anticipated free energy relationships for proton transfer processes in PCET reactions.

  12. Hole-transfer induced energy transfer in perylene diimide dyads with a donor-spacer-acceptor motif.

    PubMed

    Kölle, Patrick; Pugliesi, Igor; Langhals, Heinz; Wilcken, Roland; Esterbauer, Andreas J; de Vivie-Riedle, Regina; Riedle, Eberhard

    2015-10-14

    We investigate the photoinduced dynamics of perylene diimide dyads based on a donor-spacer-acceptor motif with polyyne spacers of varying length by pump-probe spectroscopy, time resolved fluorescence, chemical variation and quantum chemistry. While the dyads with pyridine based polyyne spacers undergo energy transfer with near-unity quantum efficiency, in the dyads with phenyl based polyyne spacers the energy transfer efficiency drops below 50%. This suggests the presence of a competing electron transfer process from the spacer to the energy donor as the excitation sink. Transient absorption spectra, however, reveal that the spacer actually mediates the energy transfer dynamics. The ground state bleach features of the polyyne spacers appear due to the electron transfer decay with the same time constant present in the rise of the ground state bleach and stimulated emission of the perylene energy acceptor. Although the electron transfer process initially quenches the fluorescence of the donor it does not inhibit energy transfer to the perylene energy acceptor. The transient signatures reveal that electron and energy transfer processes are sequential and indicate that the donor-spacer electron transfer state itself is responsible for the energy transfer. Through the introduction of a Dexter blocker unit into the spacer we can clearly exclude any through bond Dexter-type energy transfer. Ab initio calculations on the donor-spacer and the donor-spacer-acceptor systems reveal the existence of a bright charge transfer state that is close in energy to the locally excited state of the acceptor. Multipole-multipole interactions between the bright charge transfer state and the acceptor state enable the energy transfer. We term this mechanism coupled hole-transfer FRET. These dyads represent a first example that shows how electron transfer can be connected to energy transfer for use in novel photovoltaic and optoelectronic devices. PMID:26347443

  13. Thermal energy transfer system and method

    SciTech Connect

    Knoos, S.

    1985-02-12

    A thermodynamic system for interchanging thermal energy with external sources or sinks while minimizing the dead volume presented to the pressure cycle is based upon a thermodynamic machine which cycles a working fluid bidirectionally through a regenerator means and at least one external heat exchanger for interchanging thermal energy with a heat source or sink. Between the thermodynamic machine and the heat exchanger is a switchable thermal energy storage system using at least one heat load capacitor and two different circulation loops through the storage system. By switching the working fluid paths through the thermal energy storage system, Thermal energy is exchanged but the thermodynamic machine is isolated from the heat exchanger at least predetermined intervals during operation, and the dead space in the external device does not affect the pressure cycle of the machine.

  14. Redefining RECs: Additionality in the voluntary Renewable Energy Certificate market

    NASA Astrophysics Data System (ADS)

    Gillenwater, Michael Wayne

    In the United States, electricity consumers are told that they can "buy" electricity from renewable energy projects, versus fossil fuel-fired facilities, through participation in a voluntary green power program. The marketing messages communicate to consumers that their participation and premium payments for a green label will cause additional renewable energy generation and thereby allow them to claim they consume electricity that is absent pollution as well as reduce pollutant emissions. Renewable Energy Certificates (RECs) and wind energy are the basis for the majority of the voluntary green power market in the United States. This dissertation addresses the question: Do project developers respond to the voluntary REC market in the United States by altering their decisions to invest in wind turbines? This question is investigated by modeling and probabilistically quantifying the effect of the voluntary REC market on a representative wind power investor in the United States using data from formal expert elicitations of active participants in the industry. It is further explored by comparing the distribution of a sample of wind power projects supplying the voluntary green power market in the United States against an economic viability model that incorporates geographic factors. This dissertation contributes the first quantitative analysis of the effect of the voluntary REC market on project investment. It is found that 1) RECs should be not treated as equivalent to emission offset credits, 2) there is no clearly credible role for voluntary market RECs in emissions trading markets without dramatic restructuring of one or both markets and the environmental commodities they trade, and 3) the use of RECs in entity-level GHG emissions accounting (i.e., "carbon footprinting") leads to double counting of emissions and therefore is not justified. The impotence of the voluntary REC market was, at least in part, due to the small magnitude of the REC price signal and lack of

  15. Fluorescence energy transfer between Ca2+ transport ATPase molecules in artificial membranes.

    PubMed

    Vanderkooi, J M; Ierokomas, A; Nakamura, H; Martonosi, A

    1977-04-01

    The purified ATPase of sarcoplasmic reticulum was covalently labeled with N-iodoacetyl-N'-(5-sulfo-1-naphthyl)ethylenediamine (1,5-IAEDANS) or with iodoacetamidofluorescein (IAF). In reconstituted vesicles containing both types of ATPase molecules fluorescence energy transfer was observed from the IAEDANS (donor) to the IAF (acceptor) fluorophore as determined by the ratio of donor and acceptor fluorescence intensities, and by nanosecond decay measurements of donor fluorescence in the presence or absence of the acceptor. The observed energy transfer may arise by random collisions between ATPase molecules due to Brownian motion or by formation of complexes containing several ATPase molecules. Experimental distinction between these two models of energy transfer is possible based on predictions derived from mathematical models. Up to tenfold dilution of the lipid phase of reconstituted vesicles with egg lecithin had no measurable effect upon the energy transfer, suggesting that random collision between ATPase molecules in the lipid phase is not the principal cause of the observed effect. Addition of unlabeled ATPase in five- to tenfold molar excess over the labeled molecules abolished energy transfer. These observations together with electron microscopic and chemical cross-linking studies support the existence of ATPase oligomers in the membrane with sufficiently long lifetimes for energy transfer to occur. A hypothetical equilibrium between monomeric and tetrameric forms of the ATPase governed by the membrane potential is proposed as the structural basis of the regulation of Ca uptake and release by sarcoplasmic reticulum membranes during muscle contraction and relaxation.

  16. On Kinetics Modeling of Vibrational Energy Transfer

    NASA Technical Reports Server (NTRS)

    Gilmore, John O.; Sharma, Surendra P.; Cavolowsky, John A. (Technical Monitor)

    1996-01-01

    Two models of vibrational energy exchange are compared at equilibrium to the elementary vibrational exchange reaction for a binary mixture. The first model, non-linear in the species vibrational energies, was derived by Schwartz, Slawsky, and Herzfeld (SSH) by considering the detailed kinetics of vibrational energy levels. This model recovers the result demanded at equilibrium by the elementary reaction. The second model is more recent, and is gaining use in certain areas of computational fluid dynamics. This model, linear in the species vibrational energies, is shown not to recover the required equilibrium result. Further, this more recent model is inconsistent with its suggested rate constants in that those rate constants were inferred from measurements by using the SSH model to reduce the data. The non-linear versus linear nature of these two models can lead to significant differences in vibrational energy coupling. Use of the contemporary model may lead to significant misconceptions, especially when integrated in computer codes considering multiple energy coupling mechanisms.

  17. Synthesis of carboxylic block copolymers via reversible addition fragmentation transfer polymerization for tooth erosion prevention.

    PubMed

    Lei, Y; Wang, T; Mitchell, J W; Qiu, J; Kilpatrick-Liverman, L

    2014-12-01

    Dental professionals are seeing a growing population of patients with visible signs of dental erosion. The approach currently being used to address the problem typically leverages the enamel protection benefits of fluoride. In this report, an alternative new block copolymer with a hydrophilic polyacrylic acid (PAA) block and a hydrophobic poly(methyl methacrylate) (PMMA) block was developed to similarly reduce the mineral loss from enamel under acidic conditions. This series of PMMA-b-PAA block copolymers was synthesized by reversible addition fragmentation transfer (RAFT) polymerization. Their structures were characterized by gel permeation chromatography (GPC) and (1)H nuclear magnetic resonance (NMR) spectra. The molar fractions of acrylic acid (AA) in the final block copolymer were finely controlled from 0.25 to 0.94, and the molecular weight (Mn) of PMMA-b-PAA was controlled from 10 kDa to 90 kDa. The binding capability of the block copolymer with hydroxyapatite (HAP) was investigated by ultraviolet-visible spectroscopy (UV-Vis) and Fourier transform infrared (FTIR) spectroscopy. FTIR spectra confirmed that the PMMA-b-PAA block copolymer could bind to HAP via bridging bidentate bonds. Both UV-Vis and FTIR spectra additionally indicated that a high polymer concentration and low solution pH favored the polymer binding to HAP. The erosion-preventing efficacy of the PMMA-b-PAA block copolymer in inhibiting HAP mineral loss was quantitatively evaluated by atomic absorption spectroscopy (AAS). Based on the results, polymer treatment reduced the amount of calcium released by 27% to 30% in comparison with the unprotected samples. Scanning electron microscope (SEM) observations indicated that PMMA-b-PAA polymer treatment protected enamel from acid erosion. This new amphiphilic block copolymer has significant potential to be integrated into dentifrices or mouthrinses as an alternative non-fluoride ingredient to reduce tooth erosion.

  18. Synthesis of Carboxylic Block Copolymers via Reversible Addition Fragmentation Transfer Polymerization for Tooth Erosion Prevention

    PubMed Central

    Lei, Y.; Wang, T.; Mitchell, J.W.; Qiu, J.; Kilpatrick-Liverman, L.

    2014-01-01

    Dental professionals are seeing a growing population of patients with visible signs of dental erosion. The approach currently being used to address the problem typically leverages the enamel protection benefits of fluoride. In this report, an alternative new block copolymer with a hydrophilic polyacrylic acid (PAA) block and a hydrophobic poly(methyl methacrylate) (PMMA) block was developed to similarly reduce the mineral loss from enamel under acidic conditions. This series of PMMA-b-PAA block copolymers was synthesized by reversible addition fragmentation transfer (RAFT) polymerization. Their structures were characterized by gel permeation chromatography (GPC) and 1H nuclear magnetic resonance (NMR) spectra. The molar fractions of acrylic acid (AA) in the final block copolymer were finely controlled from 0.25 to 0.94, and the molecular weight (Mn) of PMMA-b-PAA was controlled from 10 kDa to 90 kDa. The binding capability of the block copolymer with hydroxyapatite (HAP) was investigated by ultraviolet–visible spectroscopy (UV-Vis) and Fourier transform infrared (FTIR) spectroscopy. FTIR spectra confirmed that the PMMA-b-PAA block copolymer could bind to HAP via bridging bidentate bonds. Both UV-Vis and FTIR spectra additionally indicated that a high polymer concentration and low solution pH favored the polymer binding to HAP. The erosion-preventing efficacy of the PMMA-b-PAA block copolymer in inhibiting HAP mineral loss was quantitatively evaluated by atomic absorption spectroscopy (AAS). Based on the results, polymer treatment reduced the amount of calcium released by 27% to 30% in comparison with the unprotected samples. Scanning electron microscope (SEM) observations indicated that PMMA-b-PAA polymer treatment protected enamel from acid erosion. This new amphiphilic block copolymer has significant potential to be integrated into dentifrices or mouthrinses as an alternative non-fluoride ingredient to reduce tooth erosion. PMID:25248611

  19. A molecularly based theory for electron transfer reorganization energy

    SciTech Connect

    Zhuang, Bilin; Wang, Zhen-Gang

    2015-12-14

    Using field-theoretic techniques, we develop a molecularly based dipolar self-consistent-field theory (DSCFT) for charge solvation in pure solvents under equilibrium and nonequilibrium conditions and apply it to the reorganization energy of electron transfer reactions. The DSCFT uses a set of molecular parameters, such as the solvent molecule’s permanent dipole moment and polarizability, thus avoiding approximations that are inherent in treating the solvent as a linear dielectric medium. A simple, analytical expression for the free energy is obtained in terms of the equilibrium and nonequilibrium electrostatic potential profiles and electric susceptibilities, which are obtained by solving a set of self-consistent equations. With no adjustable parameters, the DSCFT predicts activation energies and reorganization energies in good agreement with previous experiments and calculations for the electron transfer between metallic ions. Because the DSCFT is able to describe the properties of the solvent in the immediate vicinity of the charges, it is unnecessary to distinguish between the inner-sphere and outer-sphere solvent molecules in the calculation of the reorganization energy as in previous work. Furthermore, examining the nonequilibrium free energy surfaces of electron transfer, we find that the nonequilibrium free energy is well approximated by a double parabola for self-exchange reactions, but the curvature of the nonequilibrium free energy surface depends on the charges of the electron-transferring species, contrary to the prediction by the linear dielectric theory.

  20. Energy Information Transfer in Virginia. A Planning Conference.

    ERIC Educational Resources Information Center

    Hickin, Patricia

    The Virginia Planning Conference for Solar Technology Information Transfer was held in Richmond in February 1978 to elicit suggestions on how to make Virginians aware of libraries as sources of energy information and how Virginia libraries can keep their energy materials and reference services up to date. A summary of this planning session and a…

  1. Photoinduced charge and energy transfer in molecular wires.

    PubMed

    Gilbert, Mélina; Albinsson, Bo

    2015-02-21

    Exploring charge and energy transport in donor-bridge-acceptor systems is an important research field which is essential for the fundamental knowledge necessary to develop future applications. These studies help creating valuable knowledge to respond to today's challenges to develop functionalized molecular systems for artificial photosynthesis, photovoltaics or molecular scale electronics. This tutorial review focuses on photo-induced charge/energy transfer in covalently linked donor-bridge-acceptor (D-B-A) systems. Of utmost importance in such systems is to understand how to control signal transmission, i.e. how fast electrons or excitation energy could be transferred between the donor and acceptor and the role played by the bridge (the "molecular wire"). After a brief description of the electron and energy transfer theory, we aim to give a simple yet accurate picture of the complex role played by the bridge to sustain donor-acceptor electronic communication. Special emphasis is put on understanding bridge energetics and conformational dynamics effects on the distance dependence of the donor-acceptor electronic coupling and transfer rates. Several examples of donor-bridge-acceptor systems from the literature are described as a support to the discussion. Finally, porphyrin-based molecular wires are introduced, and the relationship between their electronic structure and photophysical properties is outlined. In strongly conjugated porphyrin systems, limitations of the existing electron transfer theory to interpret the distance dependence of the transfer rates are also discussed.

  2. Efficient Radioisotope Energy Transfer by Gold Nanoclusters for Molecular Imaging.

    PubMed

    Volotskova, Olga; Sun, Conroy; Stafford, Jason H; Koh, Ai Leen; Ma, Xiaowei; Cheng, Zhen; Cui, Bianxiao; Pratx, Guillem; Xing, Lei

    2015-08-26

    Beta-emitting isotopes Fluorine-18 and Yttrium-90 are tested for their potential to stimulate gold nanoclusters conjugated with blood serum proteins (AuNCs). AuNCs excited by either medical radioisotope are found to be highly effective ionizing radiation energy transfer mediators, suitable for in vivo optical imaging. AuNCs synthesized with protein templates convert beta-decaying radioisotope energy into tissue-penetrating optical signals between 620 and 800 nm. Optical signals are not detected from AuNCs incubated with Technetium-99m, a pure gamma emitter that is used as a control. Optical emission from AuNCs is not proportional to Cerenkov radiation, indicating that the energy transfer between the radionuclide and AuNC is only partially mediated by Cerenkov photons. A direct Coulombic interaction is proposed as a novel and significant mechanism of energy transfer between decaying radionuclides and AuNCs.

  3. International cooperation for renewable energy transfer

    SciTech Connect

    Wolfe, M.H.

    1992-06-01

    This paper reports that in considering the potential of major renewable energy resources in relation to their remoteness from demand centers, it is necessary to take a global view of the implications of their utilization. The present concerns regarding global warming and environmental degradation from fossil fuel combustion could be given active direction if the positive benefits of renewable energy could be realized on a meaningful scale. The dire prospect of global warming looms large in the scientific consciousness, but strategies to counter the effects of increased release of carbon dioxide and other greenhouse gases are just beginning to emerge along with remedial measures to address other environmental threats. One of the ways to achieve this is to place more reliance on renewable energy. As the impact of small-scale dispersed sources of renewable energy is minimal in comparison with fossil fuel usage, a meaningful impact could only be made by drawing upon major sources of renewable energy, mainly hydropower, tidal, and solar, in large capacity installations concentrated at sites relatively far from demand centers. There are sites that warrant serious consideration in the face of the growing environmental impact of fossil fuel usage. However, to realize this objective, an environmental imperative should be adopted that would place the importance of global environmental security on a par with present concerns for national security.

  4. Dependence of the energy transfer to graphene on the excitation energy

    SciTech Connect

    Mackowski, Sebastian Kamińska, Izabela

    2015-07-13

    Fluorescence studies of natural photosynthetic complexes on a graphene layer demonstrate pronounced influence of the excitation wavelength on the energy transfer efficiency to graphene. Ultraviolet light yields much faster decay of fluorescence, with average efficiencies of the energy transfer equal to 87% and 65% for excitation at 405 nm and 640 nm, respectively. This implies that focused light changes locally the properties of graphene affecting the energy transfer dynamics, in an analogous way as in the case of metallic nanostructures. Demonstrating optical control of the energy transfer is important for exploiting unique properties of graphene in photonic and sensing architectures.

  5. Multi-neutron transfer reactions at sub-barrier energies.

    SciTech Connect

    Rehm, K. E.

    1998-01-20

    The optimum conditions for multi-neutron transfer have been studied in the system {sup 58}Ni + {sup 124}Sn at bombarding energies at and below the Coulomb barrier. The experiments were performed in inverse kinematics with a {sup 124}Sn beam bombarding a {sup 58}Ni target. The particles were identified with respect to mass and Z in the split-pole spectrograph with a hybrid focal plane detector with mass and Z-resolutions of A/{Delta}A = 150 and Z/{Delta}Z = 70. At all energies the transfer of up to 6 neutrons was observed. The yields for these transfer reactions are found to decrease by about a factor of four for each transferred neutron.

  6. Topological energy transfer in an optomechanical system with exceptional points

    NASA Astrophysics Data System (ADS)

    Xu, H.; Mason, D.; Jiang, Luyao; Harris, J. G. E.

    2016-09-01

    Topological operations can achieve certain goals without requiring accurate control over local operational details; for example, they have been used to control geometric phases and have been proposed as a way of controlling the state of certain systems within their degenerate subspaces. More recently, it was predicted that topological operations can be used to transfer energy between normal modes, provided that the system possesses a specific type of degeneracy known as an exceptional point. Here we demonstrate the transfer of energy between two vibrational modes of a cryogenic optomechanical device using topological operations. We show that this transfer arises from the presence of an exceptional point in the spectrum of the device. We also show that this transfer is non-reciprocal. These results open up new directions in system control; they also open up the possibility of exploring other dynamical effects related to exceptional points, including the behaviour of thermal and quantum fluctuations in their vicinity.

  7. Production and Transfer of Energy and Information in Hamiltonian Systems

    PubMed Central

    Antonopoulos, Chris G.; Bianco-Martinez, Ezequiel; Baptista, Murilo S.

    2014-01-01

    We present novel results that relate energy and information transfer with sensitivity to initial conditions in chaotic multi-dimensional Hamiltonian systems. We show the relation among Kolmogorov-Sinai entropy, Lyapunov exponents, and upper bounds for the Mutual Information Rate calculated in the Hamiltonian phase space and on bi-dimensional subspaces. Our main result is that the net amount of transfer from kinetic to potential energy per unit of time is a power-law of the upper bound for the Mutual Information Rate between kinetic and potential energies, and also a power-law of the Kolmogorov-Sinai entropy. Therefore, transfer of energy is related with both transfer and production of information. However, the power-law nature of this relation means that a small increment of energy transferred leads to a relatively much larger increase of the information exchanged. Then, we propose an “experimental” implementation of a 1-dimensional communication channel based on a Hamiltonian system, and calculate the actual rate with which information is exchanged between the first and last particle of the channel. Finally, a relation between our results and important quantities of thermodynamics is presented. PMID:24586891

  8. Paths to Förster's resonance energy transfer (FRET) theory

    NASA Astrophysics Data System (ADS)

    Masters, B. R.

    2014-02-01

    Theodor Förster (1910-1974) developed a phenomenological theory of nonradiative resonance energy transfer which proved to be transformative in the fields of chemistry, biochemistry, and biology. This paper explores the experimental and the theoretical antecedents of Förster's theory of resonance energy transfer (FRET). Early studies of sensitized fluorescence, fluorescence depolarization, and photosynthesis demonstrated the phenomena of long-range energy transfer. At the same time physicists developed theoretical models which contained common physical mechanisms and parameters: oscillating dipoles as models for the atoms or molecules, dipole-dipole coupling for the interaction, and a distance R0 that is optimal for resonance energy transfer. Early theories predicted R0 that was too large as compared to experiments. Finally, in 1946 Förster developed a classical theory and in 1948 he developed a quantum mechanical theory; both theories predicted an inverse sixth power dependence of the rate of energy transfer and a R0 that agreed with experiments. This paper attempts to determine why Förster succeeded when the other theoreticians failed to develop the correct theory. The putative roles of interdisciplinary education and collaborative research are discussed. Furthermore, I explore the role of science journals and their specific audiences in the popularization of FRET to a broad interdisciplinary community.

  9. Correlated energy transfer between two ultracold atomic species

    NASA Astrophysics Data System (ADS)

    Krönke, Sven; Knörzer, Johannes; Schmelcher, Peter

    2015-05-01

    We study a single atom as an open quantum system, which is initially prepared in a coherent state of low energy and oscillates in a one-dimensional harmonic trap through an interacting ensemble of NA bosons, held in a displaced trap [arXiv:1410.8676]. The non-equilibrium quantum dynamics of the total system is simulated by means of an ab-initio method, giving us access to all properties of the open system and its finite environment. In this talk, we focus on unraveling the interplay of energy exchange and correlations between the subsystems, which are coupled in such a spatio-temporally localized manner. We show that an inter-species interaction-induced level splitting accelerates the energy transfer between the atomic species for larger NA, which becomes less complete at the same time. System-environment correlations prove to be significant except for times when the excess energy distribution among the subsystems is highly imbalanced. These correlations result in incoherent energy transfer processes, which accelerate the early energy donation of the single atom. By analyzing correlations between intra-subsystem excitations, certain energy transfer channels are shown to be (dis-)favored depending on the instantaneous direction of transfer.

  10. A Classroom Demonstration of Wireless Energy Transfer

    ERIC Educational Resources Information Center

    Luczak, Matthew; Baker, Blane

    2010-01-01

    Resonance is one of the recurring themes in physics and, as such, is important in research applications and in explaining many everyday phenomena. Students often encounter resonance during studies of simple harmonic motion, sound, mechanical waves and AC circuits. Alternatively, or in addition, resonance can be demonstrated in the context of…

  11. Energy transfer between laser beams crossing in ignition hohlraums

    SciTech Connect

    Michel, P; Divol, L; Williams, E A; Thomas, C A; Callahan, D A; Weber, S; Haan, S W; Salmonson, J D; Dixit, S; Hinkel, D E; Edwards, M J; MacGowan, B J; Lindl, J D; Glenzer, S H; Suter, L J

    2008-10-03

    The full scale modeling of power transfer between laser beams crossing in plasmas is presented. A new model was developed, allowing calculation of the propagation and coupling of pairs of laser beams with their associated plasma wave in three dimensions. The full laser beam smoothing techniques used in ignition experiments are modeled, and their effects on crossed-beam energy transfer is investigated. A shift in wavelength between the beams can move the instability off resonance and reduce the transfer, hence preserving the symmetry of the capsule implosion.

  12. Energy transfer at gas-liquid interface: Towards energetic materials

    NASA Astrophysics Data System (ADS)

    Szabo, Tamas

    Physicochemical surface processes have great importance in the different fields of everyday life and science. Computational characterization of collisional energy transfer at a gas-liquid interface is a helpful tool to interpret recent experimental studies and to yield insight into the energy feedback mechanism of multiphase combustion problems. As a first step, a simple Lennard-Jones system was used to investigate the dependence of the collisional energy transfer and the gas atom trapping probabilities on the temperature of the bulk liquid, on the gas/liquid particle mass ratios, on the incident angle of the impinging projectile, and on the gas-liquid interaction strength. We find in accord with the experimental results that the kinematic effects dominate the energy transfer dynamics, but the importance of the role of surface roughening as the temperature of the liquid increases is also seen. The second system, nitromethane was chosen to extend the range of simulations. It is a molecular model system, representing nitramine-type energetic materials. Having had a good potential description for the nitromethane molecule including all internal degrees of freedom, we generated simplified molecular systems based on the original nitromethane model to isolate particular features of the dynamics. We have investigated the effect of the initial incident energy, of the inclusion of the internal degrees of freedom, of the initial incident kinetic energy and of the gas-surface interaction strength. The incorporation of internal degrees of freedom enhanced the collisional energy transfer. These calculations also point to the importance of simple kinematics as it predicts the increase of the ratio of energy transferred with increased initial incident energy of the gas particle.

  13. Radiative energy transfer in molecular gases

    NASA Technical Reports Server (NTRS)

    Tiwari, Surendra N.

    1992-01-01

    Basic formulations, analyses, and numerical procedures are presented to study radiative interactions in gray as well as nongray gases under different physical and flow conditions. After preliminary fluid-dynamical considerations, essential governing equations for radiative transport are presented that are applicable under local and nonlocal thermodynamic equilibrium conditions. Auxiliary relations for relaxation times and spectral absorption models are also provided. For specific applications, several simple gaseous systems are analyzed. The first system considered consists of a gas bounded by two parallel plates having the same temperature. Within the gas there is a uniform heat source per unit volume. For this system, both vibrational nonequilibrium effects and radiation conduction interactions are studied. The second system consists of fully developed laminar flow and heat transfer in a parallel plate duct under the boundary condition of a uniform surface heat flux. For this system, effects of gray surface emittance are studied. With the single exception of a circular geometry, the third system is considered identical to the second system. Here, the influence of nongray walls is also studied.

  14. Collisionless inter-species energy transfer and turbulent heating in drift wave turbulence

    SciTech Connect

    Zhao, L.; Diamond, P. H.

    2012-08-15

    We reconsider the classic problems of calculating 'turbulent heating' and collisionless inter-species transfer of energy in drift wave turbulence. These issues are of interest for low collisionality, electron heated plasmas, such as ITER, where collisionless energy transfer from electrons to ions is likely to be significant. From the wave Poynting theorem at steady state, a volume integral over an annulus r{sub 1}=-S{sub r}|{sub r{sub 1}{sup r{sub 2}}}{ne}0. Here S{sub r} is the wave energy density flux in the radial direction. Thus, a wave energy flux differential across an annular region indeed gives rise to a net heating, in contrast to previous predictions. This heating is related to the Reynolds work by the zonal flow, since S{sub r} is directly linked to the zonal flow drive. In addition to net heating, there is inter-species heat transfer. For collisionless electron drift waves, the total turbulent energy source for collisionless heat transfer is due to quasilinear electron cooling. Subsequent quasilinear ion heating occurs through linear ion Landau damping. In addition, perpendicular heating via ion polarization currents contributes to ion heating. Since at steady state, Reynolds work of the turbulence on the zonal flow must balance zonal flow frictional damping ({approx}{nu}{sub ii}{sup 2}{approx}|(e{phi}(tilde sign)/T)|{sup 4}), it is no surprise that zonal flow friction appears as an important channel for ion heating. This process of energy transfer via zonal flow has not previously been accounted for in analyses of energy transfer. As an application, we compare the rate of turbulent energy transfer in a low collisionality plasma with the rate of the energy transfer by collisions. The result shows that the collisionless turbulent energy transfer is a significant energy coupling process for ITER plasma.

  15. Tech Transfer Webinar: Energy Absorbing Materials

    SciTech Connect

    Duoss, Eric

    2014-06-17

    A new material has been designed and manufactured at LLNL that can absorb mechanical energy--a cushion--while also providing protection against sheering. This ordered cellular material is 3D printed using direct ink writing techniques under development at LLNL. It is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  16. Tech Transfer Webinar: Energy Absorbing Materials

    ScienceCinema

    Duoss, Eric

    2016-07-12

    A new material has been designed and manufactured at LLNL that can absorb mechanical energy--a cushion--while also providing protection against sheering. This ordered cellular material is 3D printed using direct ink writing techniques under development at LLNL. It is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

  17. Corrosion and Heat Transfer Characteristics of Water Dispersed with Carboxylate Additives and Multi Walled Carbon Nano Tubes

    NASA Astrophysics Data System (ADS)

    Moorthy, Chellapilla V. K. N. S. N.; Srinivas, Vadapalli

    2016-02-01

    This paper summarizes a recent work on anti-corrosive properties and enhanced heat transfer properties of carboxylated water based nanofluids. Water mixed with sebacic acid as carboxylate additive found to be resistant to corrosion and suitable for automotive environment. The carboxylated water is dispersed with very low mass concentration of carbon nano tubes at 0.025, 0.05 and 0.1 %. The stability of nanofluids in terms of zeta potential is found to be good with carboxylated water compared to normal water. The heat transfer performance of nanofluids is carried out on an air cooled heat exchanger similar to an automotive radiator with incoming air velocities across radiator at 5, 10 and 15 m/s. The flow Reynolds number of water is in the range of 2500-6000 indicating developing flow regime. The corrosion resistance of nanofluids is found to be good indicating its suitability to automotive environment. There is a slight increase in viscosity and marginal decrease in the specific heat of nanofluids with addition of carboxylate as well as CNTs. Significant improvement is observed in the thermal conductivity of nanofluids dispersed with CNTs. During heat transfer experimentation, the inside heat transfer coefficient and overall heat transfer coefficient has also improved markedly. It is also found that the velocity of air and flow rate of coolant plays an important role in enhancement of the heat transfer coefficient and overall heat transfer coefficient.

  18. Excitation energy transfer in a classical analogue of photosynthetic antennae.

    PubMed

    Mančal, Tomáš

    2013-09-26

    We formulate a classical pure dephasing system-bath interaction model in a full correspondence to the well-studied quantum model of natural light-harvesting antennae. The equations of motion of our classical model not only represent the correct classical analogy to the quantum description of excitonic systems, but they also have exactly the same functional form. We demonstrate derivation of classical dissipation and relaxation tensor in second order perturbation theory. We find that the only difference between the classical and quantum descriptions is in the interpretation of the state and in certain limitations imposed on the parameters of the model by classical physics. The effects of delocalization, transfer pathway interference, and the transition from coherent to diffusive transfer can be found already in the classical realm. The only qualitatively new effect occurring in quantum systems is the preference for a downhill energy transfer and the resulting possibility of trapping the energy in the lowest energy state.

  19. Forster energy transfer in chlorosomes of green photosynthetic bacteria

    NASA Technical Reports Server (NTRS)

    Causgrove, T. P.; Brune, D. C.; Blankenship, R. E.

    1992-01-01

    Energy transfer properties of whole cells and chlorosome antenna complexes isolated from the green sulfur bacteria Chlorobium limicola (containing bacteriochlorophyll c), Chlorobium vibrioforme (containing bacteriochlorophyll d) and Pelodictyon phaeoclathratiforme (containing bacteriochlorophyll e) were measured. The spectral overlap of the major chlorosome pigment (bacteriochlorophyll c, d or, e) with the bacteriochlorophyll a B795 chlorosome baseplate pigment is greatest for bacteriochlorophyll c and smallest for bacteriochlorophyll e. The absorbance and fluorescence spectra of isolated chlorosomes were measured, fitted to gaussian curves and the overlap factors with B795 calculated. Energy transfer times from the bacteriochlorophyll c, d or e to B795 were measured in whole cells and the results interpreted in terms of the Forster theory of energy transfer.

  20. Early career: Templating of liquid crystal microstructures by reversible addition-fragmentation chain transfer polymerization

    SciTech Connect

    Heinen, Jennifer M.

    2014-12-31

    This research has shown that the microstructure of self-assembled copolymers can be decoupled from the polymer chemistry. The simplest polymer architecture, linear block copolymers, is valuable for a broad range of applications, including adhesives and coatings, medical devices, electronics and energy storage, because these block copolymers reproducibly self-assemble into microphase separated nanoscale domains. Unfortunately, the self-assembled microstructure is tuned by polymer composition, thus limiting the potential to simultaneously optimize chemical, mechanical, and transport properties for desired applications. To this end, much work was been put into manipulating block copolymer self-assembly independently of polymer composition. These efforts have included the use of additives or solvents to alter polymer chain conformation, the addition of a third monomer to produce ABC triblock terpolymers, architectures with mixed blocks, such as tapered/gradient polymers, and the synthesis of other nonlinear molecular architectures. This work has shown that the microstructures formed by linear ABC terpolymers can be altered by controlling the architecture of the polymer molecules at a constant monomer composition, so that the microstructure is tuned independently from the chemical properties.

  1. A new energy transfer model for turbulent free shear flow

    NASA Technical Reports Server (NTRS)

    Liou, William W.-W.

    1992-01-01

    A new model for the energy transfer mechanism in the large-scale turbulent kinetic energy equation is proposed. An estimate of the characteristic length scale of the energy containing large structures is obtained from the wavelength associated with the structures predicted by a weakly nonlinear analysis for turbulent free shear flows. With the inclusion of the proposed energy transfer model, the weakly nonlinear wave models for the turbulent large-scale structures are self-contained and are likely to be independent flow geometries. The model is tested against a plane mixing layer. Reasonably good agreement is achieved. Finally, it is shown by using the Liapunov function method, the balance between the production and the drainage of the kinetic energy of the turbulent large-scale structures is asymptotically stable as their amplitude saturates. The saturation of the wave amplitude provides an alternative indicator for flow self-similarity.

  2. Method and apparatus for transferring energy and mass

    SciTech Connect

    Rockenfeller, U.

    1989-10-24

    This patent describes method of transferring and recovering energy. It comprises forming a slurry of a liquid selected from the group consisting of long chain alcohols, ethers, glycols, glycol ethers, sebecates, phthalates, aldehydes and ketones and a solid sorbate which does not dissolve in the liquid and is capable of forming a solid/gas compound with a gaseous refrigerant, mixing the gaseous refrigerant with the slurry whereby the gas forms a solid/gas compound with the solid sorbate, and exposing the slurry mixture to a heat exchange surface whereby the energy from the formation of the solid/gas compound is transferred to the heat exchange surface.

  3. Spectrum and energy transfer in steady Burgers turbulence

    NASA Technical Reports Server (NTRS)

    Girimaji, Sharath S.; Zhou, YE

    1995-01-01

    The spectrum, energy transfer, and spectral interactions in steady Burgers turbulence are studied using numerically generated data. The velocity field is initially random and the turbulence is maintained steady by forcing the amplitude of a band of low wavenumbers to be invariant in time, while permitting the phase to change as dictated by the equation. The spectrum, as expected, is very different from that of Navier-Stokes turbulence. It is demonstrated that the far range of the spectrum scales as predicted by Burgers. Despite the difference in their spectra, in matters of the spectral energy transfer and triadic interactions Burgers turbulence is similar to Navier-Stokes turbulence.

  4. Classical model for energy transfer in microspherical droplets

    NASA Astrophysics Data System (ADS)

    Pineda, Andrew C.; Ronis, David

    1995-11-01

    A classical electrodynamic model for energy transfer between donor and acceptor molecules in which the molecules are modeled using Drude oscillators is presented for dye solutions in the form of micrometer-sized droplets. The model incorporates multiparticle scattering effects by means of a binary collision expansion. Enhanced energy transfer rates and nontrivial concentration effects appear due to the Mie resonances of the droplet. Theory is discussed in light of the experiments of L. M. Folan, S. Arnold, and S. D. Druger [Chem. Phys. Lett. 118, 322 (1985)].

  5. Efficiency of pulse high-current generator energy transfer into plasma liner energy

    NASA Astrophysics Data System (ADS)

    Oreshkin, V. I.

    2013-08-01

    The efficiency of capacitor-bank energy transfer from a high-current pulse generator into kinetic energy of a plasma liner has been analyzed. The analysis was performed using a model including the circuit equations and equations of the cylindrical shell motion. High efficiency of the energy transfer into kinetic energy of the liner is shown to be achieved only by a low-inductance generator. We considered an "ideal" liner load in which the load current is close to zero in the final of the shell compression. This load provides a high (up to 80%) efficiency of energy transfer and higher stability when compressing the liner.

  6. Technology transfer for the US Department of Energy's Energy Storage Program: Volume 1, Recommendations

    SciTech Connect

    Bruneau, C.L.; Fassbender, L.L.

    1988-10-01

    Technologies developed by the US Department of Energy's (DOE) Energy Storage (STOR) Program must be converted into products, processes, or services that benefit the private sector. The process of technology transfer is the primary means of accomplishing this. The purpose of this report is to examine the technology transfer activities of the STOR Program and suggest mechanisms that might make the transfer of technologies from national laboratories and universities to the private sector more effective. A brief summary of recommendations that would improve the effectiveness of the transfer of energy storage technologies from the national laboratories to the private sector is discussed. 33 refs., 2 figs.

  7. Interacting scales and energy transfer in isotropic turbulence

    NASA Technical Reports Server (NTRS)

    Zhou, YE

    1993-01-01

    The dependence of the energy transfer process on the disparity of the interacting scales is investigated in the inertial and far-dissipation ranges of isotropic turbulence. The strategy for generating the simulated flow fields and the choice of a disparity parameter to characterize the scaling of the interactions is discussed. The inertial range is found to be dominated by relatively local interactions, in agreement with the Kolmogorov assumption. The far-dissipation is found to be dominated by relatively non-local interactions, supporting the classical notion that the far-dissipation range is slaved to the Kolmogorov scales. The measured energy transfer is compared with the classical models of Heisenberg, Obukhov, and the more detailed analysis of Tennekes and Lumley. The energy transfer statistics measured in the numerically simulated flows are found to be nearly self-similar for wave numbers in the inertial range. Using the self-similar form measured within the limited scale range of the simulation, an 'ideal' energy transfer function and the corresponding energy flux rate for an inertial range of infinite extent are constructed. From this flux rate, the Kolmogorov constant is calculated to be 1.5, in excellent agreement with experiments.

  8. Optimal Energy Transfer in Light-Harvesting Systems.

    PubMed

    Chen, Lipeng; Shenai, Prathamesh; Zheng, Fulu; Somoza, Alejandro; Zhao, Yang

    2015-08-20

    Photosynthesis is one of the most essential biological processes in which specialized pigment-protein complexes absorb solar photons, and with a remarkably high efficiency, guide the photo-induced excitation energy toward the reaction center to subsequently trigger its conversion to chemical energy. In this work, we review the principles of optimal energy transfer in various natural and artificial light harvesting systems. We begin by presenting the guiding principles for optimizing the energy transfer efficiency in systems connected to dissipative environments, with particular attention paid to the potential role of quantum coherence in light harvesting systems. We will comment briefly on photo-protective mechanisms in natural systems that ensure optimal functionality under varying ambient conditions. For completeness, we will also present an overview of the charge separation and electron transfer pathways in reaction centers. Finally, recent theoretical and experimental progress on excitation energy transfer, charge separation, and charge transport in artificial light harvesting systems is delineated, with organic solar cells taken as prime examples.

  9. Optimal Energy Transfer in Light-Harvesting Systems.

    PubMed

    Chen, Lipeng; Shenai, Prathamesh; Zheng, Fulu; Somoza, Alejandro; Zhao, Yang

    2015-01-01

    Photosynthesis is one of the most essential biological processes in which specialized pigment-protein complexes absorb solar photons, and with a remarkably high efficiency, guide the photo-induced excitation energy toward the reaction center to subsequently trigger its conversion to chemical energy. In this work, we review the principles of optimal energy transfer in various natural and artificial light harvesting systems. We begin by presenting the guiding principles for optimizing the energy transfer efficiency in systems connected to dissipative environments, with particular attention paid to the potential role of quantum coherence in light harvesting systems. We will comment briefly on photo-protective mechanisms in natural systems that ensure optimal functionality under varying ambient conditions. For completeness, we will also present an overview of the charge separation and electron transfer pathways in reaction centers. Finally, recent theoretical and experimental progress on excitation energy transfer, charge separation, and charge transport in artificial light harvesting systems is delineated, with organic solar cells taken as prime examples. PMID:26307957

  10. Technology transfer for the US Department of Energy's Energy Storage Program: Volume 2, Appendices

    SciTech Connect

    Bruneau, C.L.; Fassbender, L.L.

    1988-10-01

    This document contains the appendices to Technology Transfer Recommendations for the US Department of Energy's Storage Program (PNL-6484, Vol. 1). These appendices are a list of projects, publications, and presentations connected with the Energy Storage (STOR) program. In Volume 1, the technology transfer activities of the STOR program are examined and mechanisms for increasing the effectiveness of those activities are recommended.

  11. Quantal Aspects of - Energy Transfer and Photodissociation of Oscillators.

    NASA Astrophysics Data System (ADS)

    Tanner, John Joseph

    1988-12-01

    Our first chapter examines the mechanism by which molecular rotation enhances vibrational relaxation of a diatomic molecule. Three factors are discussed, lowering by rotational transitions of the vibrational energy defect, coupling due to potential matrix elements off diagonal in rotational state, and additional phase shifts introduced into the incoming and outgoing waves by anisotropy in the intermolecular potential. The distorted wave solution of the coupled states scattering equations elucidates the importance of each factor for H_2(v = 1) - He, CO(v = 1) - H_2, and for vibrational energy transfer from H_2 (v = 1) to CO(v = 0,1,2). Rotation is found to play both an energetic and a dynamical role. In the energetic role, rotation lowers the vibrational energy defect and thereby enhances vibrational relaxation, while the dynamic contribution takes the form of additional phase shifts introduced into the incoming and outgoing waves by the potential anisotropy. Our results suggest that molecular anisotropy in the region of the classical turning point is an important factor in the rotational enhancement observed in recent comparisons of CSA and IOSA vibrational relaxation rate constants for the N_2-He and CO-He systems. In the second chapter we study the response of a highly excited Morse oscillator with 179 bound states to an intense, below resonance electromagnetic field. A dynamic, quantal description of dissociation is obtained from an inspection of the time dependent wavefunction. The bound to continuum transitions which occur during dissociation involve the emission of a high energy, coherent wave which propagates to infinity--a feature not observed in other studies of the periodically driven Morse oscillator. Initially, the exodus of this wave results in a rapid increase in the dissociation probability. However, at longer times the dissociation slows down and concurrently the system is localized in the bound state basis, indicating that even though the classical

  12. Utilizing Energy Transfer in Binary and Ternary Bulk Heterojunction Organic Solar Cells.

    PubMed

    Feron, Krishna; Cave, James M; Thameel, Mahir N; O'Sullivan, Connor; Kroon, Renee; Andersson, Mats R; Zhou, Xiaojing; Fell, Christopher J; Belcher, Warwick J; Walker, Alison B; Dastoor, Paul C

    2016-08-17

    Energy transfer has been identified as an important process in ternary organic solar cells. Here, we develop kinetic Monte Carlo (KMC) models to assess the impact of energy transfer in ternary and binary bulk heterojunction systems. We used fluorescence and absorption spectroscopy to determine the energy disorder and Förster radii for poly(3-hexylthiophene-2,5-diyl), [6,6]-phenyl-C61-butyric acid methyl ester, 4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl]squaraine (DIBSq), and poly(2,5-thiophene-alt-4,9-bis(2-hexyldecyl)-4,9-dihydrodithieno[3,2-c:3',2'-h][1,5]naphthyridine-5,10-dione). Heterogeneous energy transfer is found to be crucial in the exciton dissociation process of both binary and ternary organic semiconductor systems. Circumstances favoring energy transfer across interfaces allow relaxation of the electronic energy level requirements, meaning that a cascade structure is not required for efficient ternary organic solar cells. We explain how energy transfer can be exploited to eliminate additional energy losses in ternary bulk heterojunction solar cells, thus increasing their open-circuit voltage without loss in short-circuit current. In particular, we show that it is important that the DIBSq is located at the electron donor-acceptor interface; otherwise charge carriers will be trapped in the DIBSq domain or excitons in the DIBSq domains will not be able to dissociate efficiently at an interface. KMC modeling shows that only small amounts of DIBSq (<5% by weight) are needed to achieve substantial performance improvements due to long-range energy transfer. PMID:27456294

  13. Utilizing Energy Transfer in Binary and Ternary Bulk Heterojunction Organic Solar Cells.

    PubMed

    Feron, Krishna; Cave, James M; Thameel, Mahir N; O'Sullivan, Connor; Kroon, Renee; Andersson, Mats R; Zhou, Xiaojing; Fell, Christopher J; Belcher, Warwick J; Walker, Alison B; Dastoor, Paul C

    2016-08-17

    Energy transfer has been identified as an important process in ternary organic solar cells. Here, we develop kinetic Monte Carlo (KMC) models to assess the impact of energy transfer in ternary and binary bulk heterojunction systems. We used fluorescence and absorption spectroscopy to determine the energy disorder and Förster radii for poly(3-hexylthiophene-2,5-diyl), [6,6]-phenyl-C61-butyric acid methyl ester, 4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl]squaraine (DIBSq), and poly(2,5-thiophene-alt-4,9-bis(2-hexyldecyl)-4,9-dihydrodithieno[3,2-c:3',2'-h][1,5]naphthyridine-5,10-dione). Heterogeneous energy transfer is found to be crucial in the exciton dissociation process of both binary and ternary organic semiconductor systems. Circumstances favoring energy transfer across interfaces allow relaxation of the electronic energy level requirements, meaning that a cascade structure is not required for efficient ternary organic solar cells. We explain how energy transfer can be exploited to eliminate additional energy losses in ternary bulk heterojunction solar cells, thus increasing their open-circuit voltage without loss in short-circuit current. In particular, we show that it is important that the DIBSq is located at the electron donor-acceptor interface; otherwise charge carriers will be trapped in the DIBSq domain or excitons in the DIBSq domains will not be able to dissociate efficiently at an interface. KMC modeling shows that only small amounts of DIBSq (<5% by weight) are needed to achieve substantial performance improvements due to long-range energy transfer.

  14. Polymer-grafted lignin surfactants prepared via reversible addition-fragmentation chain-transfer polymerization.

    PubMed

    Gupta, Chetali; Washburn, Newell R

    2014-08-12

    Kraft lignin grafted with hydrophilic polymers has been prepared using reversible addition-fragmentation chain-transfer (RAFT) polymerization and investigated for use as a surfactant. In this preliminary study, polyacrylamide and poly(acrylic acid) were grafted from a lignin RAFT macroinitiator at average initiator site densities estimated to be 2 per particle and 17 per particle. The target degrees of polymerization were 50 and 100, but analysis of cleaved polyacrylamide was consistent with a higher average molecular weight, suggesting not all sites were able to participate in the polymerization. All materials were readily soluble in water, and dynamic light scattering data indicate polymer-grafted lignin coexisted in isolated and aggregated forms in aqueous media. The characteristic size was 15-20 nm at low concentrations, and aggregation appeared to be a stronger function of degree of polymerization than graft density. These species were surface active, reducing the surface tension to as low as 60 dyn/cm at 1 mg/mL, and a greater decrease was observed than for polymer-grafted silica nanoparticles, suggesting that the lignin core was also surface active. While these lignin surfactants were soluble in water, they were not soluble in hexanes. Thus, it was unexpected that water-in-oil emulsions formed in all surfactant compositions and solvent ratios tested, with average droplet sizes of 10-20 μm. However, although polymer-grafted lignin has structural features similar to nanoparticles used in Pickering emulsions, its interfacial behavior was qualitatively different. While at air-water interfaces, the hydrophilic grafts promote effective reductions in surface tension, we hypothesize that the low grafting density in these lignin surfactants favors partitioning into the hexanes side of the oil-water interface because collapsed conformations of the polymer grafts improve interfacial coverage and reduce water-hexanes interactions. We propose that polymer-grafted lignin

  15. Tampering with the turbulent energy cascade with polymer additives

    NASA Astrophysics Data System (ADS)

    Valente, Pedro; da Silva, Carlos; Pinho, Fernando

    2014-11-01

    We show that the strong depletion of the viscous dissipation in homogeneous viscoelastic turbulence reported by previous authors does not necessarily imply a depletion of the turbulent energy cascade. However, for large polymer relaxation times there is an onset of a polymer-induced kinetic energy cascade which competes with the non-linear energy cascade leading to its depletion. Remarkably, the total energy cascade flux from both cascade mechanisms remains approximately the same fraction of the kinetic energy over the turnover time as the non-linear energy cascade flux in Newtonian turbulence. The authors acknowledge the funding from COMPETE, FEDER and FCT (Grant PTDC/EME-MFE/113589/2009).

  16. Heavy ion mutagenesis: linear energy transfer effects and genetic linkage

    NASA Technical Reports Server (NTRS)

    Kronenberg, A.; Gauny, S.; Criddle, K.; Vannais, D.; Ueno, A.; Kraemer, S.; Waldren, C. A.; Chatterjee, A. (Principal Investigator)

    1995-01-01

    We have characterized a series of 69 independent mutants at the endogenous hprt locus of human TK6 lymphoblasts and over 200 independent S1-deficient mutants of the human x hamster hybrid cell line AL arising spontaneously or following low-fluence exposures to densely ionizing Fe ions (600 MeV/amu, linear energy transfer = 190 keV/microns). We find that large deletions are common. The entire hprt gene (> 44 kb) was missing in 19/39 Fe-induced mutants, while only 2/30 spontaneous mutants lost the entire hprt coding sequence. When the gene of interest (S1 locus = M1C1 gene) is located on a nonessential human chromosome 11, multilocus deletions of several million base pairs are observed frequently. The S1 mutation frequency is more than 50-fold greater than the frequency of hprt mutants in the same cells. Taken together, these results suggest that low-fluence exposures to Fe ions are often cytotoxic due to their ability to create multilocus deletions that may often include the loss of essential genes. In addition, the tumorigenic potential of these HZE heavy ions may be due to the high potential for loss of tumor suppressor genes. The relative insensitivity of the hprt locus to mutation is likely due to tight linkage to a gene that is required for viability.

  17. Förster Resonance Energy Transfer imaging in vivo with approximated Radiative Transfer Equation

    PubMed Central

    Soloviev, Vadim Y.; McGinty, James; Stuckey, Daniel W.; Laine, Romain; Wylezinska-Arridge, Marzena; Wells, Dominic J.; Sardini, Alessandro; Hajnal, Joseph V.; French, Paul M.W.; Arridge, Simon R.

    2012-01-01

    We describe a new light transport model that we have applied to 3-D image reconstruction of in vivo fluorescence lifetime tomography data applied to read out Förster Resonance Energy Transfer in mice. The model is an approximation to the Radiative Transfer Equation and combines light diffusion and rays optics. This approximation is well adopted to wide-field time-gated intensity based data acquisition. Reconstructed image data are presented and compared with results obtained by using the Telegraph Equation approximation. The new approach provides improved recovery of absorption and scattering parameters while returning similar values for the fluorescence parameters. PMID:22193187

  18. An optimized surface plasmon photovoltaic structure using energy transfer between discrete nano-particles.

    PubMed

    Lin, Albert; Fu, Sze-Ming; Chung, Yen-Kai; Lai, Shih-Yun; Tseng, Chi-Wei

    2013-01-14

    Surface plasmon enhancement has been proposed as a way to achieve higher absorption for thin-film photovoltaics, where surface plasmon polariton(SPP) and localized surface plasmon (LSP) are shown to provide dense near field and far field light scattering. Here it is shown that controlled far-field light scattering can be achieved using successive coupling between surface plasmonic (SP) nano-particles. Through genetic algorithm (GA) optimization, energy transfer between discrete nano-particles (ETDNP) is identified, which enhances solar cell efficiency. The optimized energy transfer structure acts like lumped-element transmission line and can properly alter the direction of photon flow. Increased in-plane component of wavevector is thus achieved and photon path length is extended. In addition, Wood-Rayleigh anomaly, at which transmission minimum occurs, is avoided through GA optimization. Optimized energy transfer structure provides 46.95% improvement over baseline planar cell. It achieves larger angular scattering capability compared to conventional surface plasmon polariton back reflector structure and index-guided structure due to SP energy transfer through mode coupling. Via SP mediated energy transfer, an alternative way to control the light flow inside thin-film is proposed, which can be more efficient than conventional index-guided mode using total internal reflection (TIR).

  19. Photoexcited energy transfer in a weakly coupled dimer

    DOE PAGES

    Hernandez, Laura Alfonso; Nelson, Tammie; Tretiak, Sergei; Fernandez-Alberti, Sebastian

    2015-01-08

    Nonadiabatic excited-state molecular dynamics (NA-ESMD) simulations have been performed in order to study the time-dependent exciton localization during energy transfer between two chromophore units of the weakly coupled anthracene dimer dithia-anthracenophane (DTA). Simulations are done at both low temperature (10 K) and room temperature (300 K). The initial photoexcitation creates an exciton which is primarily localized on a single monomer unit. Subsequently, the exciton experiences an ultrafast energy transfer becoming localized on either one monomer unit or the other, whereas delocalization between both monomers never occurs. In half of the trajectories, the electronic transition density becomes completely localized on themore » same monomer as the initial excitation, while in the other half, it becomes completely localized on the opposite monomer. In this article, we present an analysis of the energy transfer dynamics and the effect of thermally induced geometry distortions on the exciton localization. Finally, simulated fluorescence anisotropy decay curves for both DTA and the monomer unit dimethyl anthracene (DMA) are compared. As a result, our analysis reveals that changes in the transition density localization caused by energy transfer between two monomers in DTA is not the only source of depolarization and exciton relaxation within a single DTA monomer unit can also cause reorientation of the transition dipole.« less

  20. Photoexcited energy transfer in a weakly coupled dimer

    SciTech Connect

    Hernandez, Laura Alfonso; Nelson, Tammie; Tretiak, Sergei; Fernandez-Alberti, Sebastian

    2015-01-08

    Nonadiabatic excited-state molecular dynamics (NA-ESMD) simulations have been performed in order to study the time-dependent exciton localization during energy transfer between two chromophore units of the weakly coupled anthracene dimer dithia-anthracenophane (DTA). Simulations are done at both low temperature (10 K) and room temperature (300 K). The initial photoexcitation creates an exciton which is primarily localized on a single monomer unit. Subsequently, the exciton experiences an ultrafast energy transfer becoming localized on either one monomer unit or the other, whereas delocalization between both monomers never occurs. In half of the trajectories, the electronic transition density becomes completely localized on the same monomer as the initial excitation, while in the other half, it becomes completely localized on the opposite monomer. In this article, we present an analysis of the energy transfer dynamics and the effect of thermally induced geometry distortions on the exciton localization. Finally, simulated fluorescence anisotropy decay curves for both DTA and the monomer unit dimethyl anthracene (DMA) are compared. As a result, our analysis reveals that changes in the transition density localization caused by energy transfer between two monomers in DTA is not the only source of depolarization and exciton relaxation within a single DTA monomer unit can also cause reorientation of the transition dipole.

  1. Photoexcited Energy Transfer in a Weakly Coupled Dimer.

    PubMed

    Alfonso Hernandez, Laura; Nelson, Tammie; Tretiak, Sergei; Fernandez-Alberti, Sebastian

    2015-06-18

    Nonadiabatic excited-state molecular dynamics (NA-ESMD) simulations have been performed in order to study the time-dependent exciton localization during energy transfer between two chromophore units of the weakly coupled anthracene dimer dithia-anthracenophane (DTA). Simulations are done at both low temperature (10 K) and room temperature (300 K). The initial photoexcitation creates an exciton which is primarily localized on a single monomer unit. Subsequently, the exciton experiences an ultrafast energy transfer becoming localized on either one monomer unit or the other, whereas delocalization between both monomers never occurs. In half of the trajectories, the electronic transition density becomes completely localized on the same monomer as the initial excitation, while in the other half, it becomes completely localized on the opposite monomer. In this article, we present an analysis of the energy transfer dynamics and the effect of thermally induced geometry distortions on the exciton localization. Finally, simulated fluorescence anisotropy decay curves for both DTA and the monomer unit dimethyl anthracene (DMA) are compared. Our analysis reveals that changes in the transition density localization caused by energy transfer between two monomers in DTA is not the only source of depolarization and exciton relaxation within a single DTA monomer unit can also cause reorientation of the transition dipole. PMID:25523832

  2. Plasmon resonance energy transfer and plexcitonic solar cell.

    PubMed

    Nan, Fan; Ding, Si-Jing; Ma, Liang; Cheng, Zi-Qiang; Zhong, Yu-Ting; Zhang, Ya-Fang; Qiu, Yun-Hang; Li, Xiaoguang; Zhou, Li; Wang, Qu-Quan

    2016-08-11

    Plasmon-mediated energy transfer is highly desirable in photo-electronic nanodevices, but the direct injection efficiency of "hot electrons" in plasmonic photo-detectors and plasmon-sensitized solar cells (plasmon-SSCs) is poor. On another front, Fano resonance induced by strong plasmon-exciton coupling provides an efficient channel of coherent energy transfer from metallic plasmons to molecular excitons, and organic dye molecules have a much better injection efficiency in exciton-SSCs than "hot electrons". Here, we investigate enhanced light-harvesting of chlorophyll-a molecules strongly coupled to Au nanostructured films via Fano resonance. The enhanced local field and plasmon resonance energy transfer are experimentally revealed by monitoring the ultrafast dynamical processes of the plexcitons and the photocurrent flows of the assembled plexciton-SSCs. By tuning the Fano factor and anti-resonance wavelengths, we find that the local field is largely enhanced and the efficiency of plexciton-SSCs consisting of ultrathin TiO2 films is significantly improved. Most strikingly, the output power of the plexciton-SSCs is much larger than the sum of those of the individual plasmon- and exciton-SSCs. Our observations provide a practical approach to monitor energy and electron transfer in plasmon-exciton hybrids at a strong coupling regime and also offer a new strategy to design photovoltaic nanodevices. PMID:27481652

  3. Resonance energy transfer in DNA duplexes labeled with localized dyes.

    PubMed

    Cunningham, Paul D; Khachatrian, Ani; Buckhout-White, Susan; Deschamps, Jeffrey R; Goldman, Ellen R; Medintz, Igor L; Melinger, Joseph S

    2014-12-18

    The growing maturity of DNA-based architectures has raised considerable interest in applying them to create photoactive light harvesting and sensing devices. Toward optimizing efficiency in such structures, resonant energy transfer was systematically examined in a series of dye-labeled DNA duplexes where donor-acceptor separation was incrementally changed from 0 to 16 base pairs. Cyanine dyes were localized on the DNA using double phosphoramidite attachment chemistry. Steady state spectroscopy, single-pair fluorescence, time-resolved fluorescence, and ultrafast two-color pump-probe methods were utilized to examine the energy transfer processes. Energy transfer rates were found to be more sensitive to the distance between the Cy3 donor and Cy5 acceptor dye molecules than efficiency measurements. Picosecond energy transfer and near-unity efficiencies were observed for the closest separations. Comparison between our measurements and the predictions of Förster theory based on structural modeling of the dye-labeled DNA duplex suggest that the double phosphoramidite linkage leads to a distribution of intercalated and nonintercalated dye orientations. Deviations from the predictions of Förster theory point to a failure of the point dipole approximation for separations of less than 10 base pairs. Interactions between the dyes that alter their optical properties and violate the weak-coupling assumption of Förster theory were observed for separations of less than four base pairs, suggesting the removal of nucleobases causes DNA deformation and leads to enhanced dye-dye interaction. PMID:25397906

  4. Plasmon resonance energy transfer and plexcitonic solar cell.

    PubMed

    Nan, Fan; Ding, Si-Jing; Ma, Liang; Cheng, Zi-Qiang; Zhong, Yu-Ting; Zhang, Ya-Fang; Qiu, Yun-Hang; Li, Xiaoguang; Zhou, Li; Wang, Qu-Quan

    2016-08-11

    Plasmon-mediated energy transfer is highly desirable in photo-electronic nanodevices, but the direct injection efficiency of "hot electrons" in plasmonic photo-detectors and plasmon-sensitized solar cells (plasmon-SSCs) is poor. On another front, Fano resonance induced by strong plasmon-exciton coupling provides an efficient channel of coherent energy transfer from metallic plasmons to molecular excitons, and organic dye molecules have a much better injection efficiency in exciton-SSCs than "hot electrons". Here, we investigate enhanced light-harvesting of chlorophyll-a molecules strongly coupled to Au nanostructured films via Fano resonance. The enhanced local field and plasmon resonance energy transfer are experimentally revealed by monitoring the ultrafast dynamical processes of the plexcitons and the photocurrent flows of the assembled plexciton-SSCs. By tuning the Fano factor and anti-resonance wavelengths, we find that the local field is largely enhanced and the efficiency of plexciton-SSCs consisting of ultrathin TiO2 films is significantly improved. Most strikingly, the output power of the plexciton-SSCs is much larger than the sum of those of the individual plasmon- and exciton-SSCs. Our observations provide a practical approach to monitor energy and electron transfer in plasmon-exciton hybrids at a strong coupling regime and also offer a new strategy to design photovoltaic nanodevices.

  5. Mechanical energy generation and transfer in the racket arm during table tennis topspin backhands.

    PubMed

    Iino, Yoichi; Kojima, Takeji

    2016-06-01

    The ability to generate a high racket speed and a large amount of racket kinetic energy on impact is important for table tennis players. The purpose of this study was to understand how mechanical energy is generated and transferred in the racket arm during table tennis backhands. Ten male advanced right-handed table tennis players hit topspin backhands against pre-impact topspin and backspin balls. The joint kinetics at the shoulder, elbow and wrist of the racket arm was determined using inverse dynamics. A majority of the mechanical energy of the racket arm acquired during forward swing (65 and 77% against topspin and backspin, respectively) was due to energy transfer from the trunk. Energy transfer by the shoulder joint force in the vertical direction was the largest contributor to the mechanical energy of the racket arm against both spins and was greater against backspin than against topspin (34 and 28%, respectively). The shoulder joint force directed to the right, which peaked just before impact, transferred additional energy to the racket. Our results suggest that the upward thrust of the shoulder and the late timing of the axial rotation of the upper trunk are important for an effective topspin backhand. PMID:27111711

  6. Mechanical energy generation and transfer in the racket arm during table tennis topspin backhands.

    PubMed

    Iino, Yoichi; Kojima, Takeji

    2016-06-01

    The ability to generate a high racket speed and a large amount of racket kinetic energy on impact is important for table tennis players. The purpose of this study was to understand how mechanical energy is generated and transferred in the racket arm during table tennis backhands. Ten male advanced right-handed table tennis players hit topspin backhands against pre-impact topspin and backspin balls. The joint kinetics at the shoulder, elbow and wrist of the racket arm was determined using inverse dynamics. A majority of the mechanical energy of the racket arm acquired during forward swing (65 and 77% against topspin and backspin, respectively) was due to energy transfer from the trunk. Energy transfer by the shoulder joint force in the vertical direction was the largest contributor to the mechanical energy of the racket arm against both spins and was greater against backspin than against topspin (34 and 28%, respectively). The shoulder joint force directed to the right, which peaked just before impact, transferred additional energy to the racket. Our results suggest that the upward thrust of the shoulder and the late timing of the axial rotation of the upper trunk are important for an effective topspin backhand.

  7. The Synergism Between Heat and Mass Transfer Additive and Advanced Surfaces in Aqueous LiBr Horizontal Tube Absorbers

    SciTech Connect

    Miller, W.A.

    1999-03-24

    Experiments were conducted in a laboratory to investigate the absorption of water vapor into a falling-film of aqueous lithium bromide (LiBr). A mini-absorber test stand was used to test smooth tubes and a variety of advanced tube surfaces placed horizontally in a single-row bundle. The bundle had six copper tubes; each tube had an outside diameter of 15.9-mm and a length of 0.32-m. A unique feature of the stand is its ability to operate continuously and support testing of LiBr brine at mass fractions {ge} 0.62. The test stand can also support testing to study the effect of the failing film mass flow rate, the coolant mass flow rate, the coolant temperature, the absorber pressure and the tube spacing. Manufacturers of absorption chillers add small quantities of a heat and mass transfer additive to improve the performance of the absorbers. The additive causes surface stirring which enhances the transport of absorbate into the bulk of the film. Absorption may also be enhanced with advanced tube surfaces that mechanically induce secondary flows in the falling film without increasing the thickness of the film. Several tube geometry's were identified and tested with the intent of mixing the film and renewing the interface with fresh solution from the tube wall. Testing was completed on a smooth tube and several different externally enhanced tube surfaces. Experiments were conducted over the operating conditions of 6.5 mm Hg absorber pressure, coolant temperatures ranging from 20 to 35 C and LiBr mass fractions ranging from 0.60 through 0.62. Initially the effect of tube spacing was investigated for the smooth tube surface, tested with no heat and mass transfer additive. Test results showed the absorber load and the mass absorbed increased as the tube spacing increased because of the improved wetting of the tube bundle. However, tube spacing was not a critical factor if heat and mass transfer additive was active in the mini-absorber. The additive dramatically affected

  8. 10 CFR 37.71 - Additional requirements for transfer of category 1 and category 2 quantities of radioactive...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... category 2 quantities of radioactive material. 37.71 Section 37.71 Energy NUCLEAR REGULATORY COMMISSION PHYSICAL PROTECTION OF CATEGORY 1 AND CATEGORY 2 QUANTITIES OF RADIOACTIVE MATERIAL Physical Protection in... radioactive material. A licensee transferring a category 1 or category 2 quantity of radioactive material to...

  9. An estimate of spherical impactor energy transfer for mechanical frequency up-conversion energy harvester

    NASA Astrophysics Data System (ADS)

    Corr, L. R.; Ma, D. T.

    2016-08-01

    Vibration energy harvesters, which use the impact mechanical frequency up-conversion technique, utilize an impactor, which gains kinetic energy from low frequency ambient environmental vibrations, to excite high frequency systems that efficiently convert mechanical energy to electrical energy. To take full advantage of the impact mechanical frequency up-conversion technique, it is prudent to understand the energy transfer from the low frequency excitations, to the impactor, and finally to the high frequency systems. In this work, the energy transfer from a spherical impactor to a multi degree of freedom spring / mass system, due to Hertzian impact, is investigated to gain insight on how best to design impact mechanical frequency up-conversion energy harvesters. Through this academic work, it is shown that the properties of the contact (or impact) area, i.e., radius of curvature and material properties, only play a minor role in energy transfer and that the equivalent mass of the target system (i.e., the spring / mass system) dictates the total amount of energy transferred during the impact. The novel approach of utilizing the well-known Hertzian impact methodology to gain an understanding of impact mechanical frequency up-conversion energy harvesters has made it clear that the impactor and the high frequency energy generating systems must be designed together as one system to ensure maximum energy transfer, leading to efficient ambient vibration energy harvesters.

  10. Visible Light-Driven Atom Transfer Radical Addition to Olefins using Bi2 O3 as Photocatalyst.

    PubMed

    Riente, Paola; Pericàs, Miquel A

    2015-06-01

    Bismuth oxide, an inexpensive and non-toxic semiconductor, has been successfully used as a visible light photocatalyst for the atom transfer radical addition (ATRA) reaction of organobromides to diversely functionalized terminal olefins. The reaction takes place under very mild conditions, in the absence of any additive, and with low catalyst loading (1 mol %). The corresponding ATRA products are obtained with moderate to excellent yields (up to 95 %). PMID:25925199

  11. Secondary deuterium kinetic isotope effects in irreversible additions of hydride and carbon nucleophiles to aldehydes: A spectrum of transition states from complete bond formation to single electron transfer

    SciTech Connect

    Gajewski, J.J.; Bocian, W.; Harris, N.J.; Olson, L.P.; Gajewski, J.P.

    1999-01-20

    The competitive kinetics of hydride and organometallic additions to benzaldehyde-H and -D were determined at {minus}78 C using LiAlH{sub 4}, LiBEt{sub 3}H, NaBH{sub 4}, LiBH{sub 4}, LiAl(O-tert-butoxy){sub 3}H, NaB(OMe){sub 3}H, NaB-(Ac){sub 3}H (at 20 C) methyl, phenyl, and allyl Grignard, and methyl-, phenyl-, n-butyl-, tert-butyl-, and allyllithium. The additions of hydride were found to have an inverse secondary deuterium kinetic isotope effects in all cases, but the magnitude of the effect varied inversely with the apparent reactivity of the hydride. In the additions of methyl Grignard reagent and of methyllithium and phenyllithium, inverse secondary deuterium isotope effects were observed; little if any isotope effect was observed with phenyl Grignard or n-butyl- and tert-butyllithium. With allyl Grignard and allyllithium, a normal secondary deuterium kinetic isotope effect was observed. The results indicate that rate-determining single-electron transfer occurs with allyl reagents, but direct nucleophilic reaction occurs with all of the other reagents, with the extent of bond formation dependent on the reactivity of the reagent. In the addition of methyllithium to cyclohexanecarboxyaldehyde, a less inverse secondary deuterium kinetic isotope effect was observed than that observed in the addition of methyllithium to benzaldehyde, and allyllithium addition to cyclohexanecarboxaldehyde had a kinetic isotope effect near unity. The data with organometallic additions, which are not incompatible with observations of carbonyl carbon isotope effects, suggest that electrochemically determined redox potentials which indicate endoergonic electron transfer with energies less than ca. 13 kcal/mol allow electron-transfer mechanisms to compete well with direct polar additions to aldehydes, provided that the reagent is highly stabilized, like allyl species. Methyllithium and phenyllithium and methyl and phenyl Grignard reagents are estimated to undergo electron transfer with

  12. Distance dependence in photoinduced intramolecular electron transfer. Additional remarks and calculations

    NASA Astrophysics Data System (ADS)

    Larsson, Sven; Volosov, Andrey

    1987-12-01

    Rate constants for photoinduced intramolecular electron transfer are calculated for four of the molecules studied by Hush et al. The electronic factor is obtained in quantum chemical calculations using the CNDO/S method. The results agree reasonably well with experiments for the forward reaction. Possible reasons for the disagreement for the charge recombination process are offered.

  13. 2013 MOLECULAR ENERGY TRANSFER GORDON RESEARCH CONFERENCE (JANUARY 13-18, 2013 - VENTURA BEACH MARRIOTT, VENTURA CA

    SciTech Connect

    Reid, Scott A.

    2012-10-18

    Sessions covered all areas of molecular energy transfer, with 10 sessions of talks and poster sessions covering the areas of :  Energy Transfer in Inelastic and Reactive Scattering  Energy Transfer in Photoinitiated and Unimolecular Reactions  Non-adiabatic Effects in Energy TransferEnergy Transfer at Surfaces and Interfaces  Energy Transfer in Clusters, Droplets, and Aerosols  Energy Transfer in Solution and Solid  Energy Transfer in Complex Systems  Energy Transfer: New vistas and horizons  Molecular Energy Transfer: Where Have We Been and Where are We Going?

  14. Additive Manufacturing/Diagnostics via the High Frequency Induction Heating of Metal Powders: The Determination of the Power Transfer Factor for Fine Metallic Spheres

    SciTech Connect

    Rios, Orlando; Radhakrishnan, Balasubramaniam; Caravias, George; Holcomb, Matthew

    2015-03-11

    Grid Logic Inc. is developing a method for sintering and melting fine metallic powders for additive manufacturing using spatially-compact, high-frequency magnetic fields called Micro-Induction Sintering (MIS). One of the challenges in advancing MIS technology for additive manufacturing is in understanding the power transfer to the particles in a powder bed. This knowledge is important to achieving efficient power transfer, control, and selective particle heating during the MIS process needed for commercialization of the technology. The project s work provided a rigorous physics-based model for induction heating of fine spherical particles as a function of frequency and particle size. This simulation improved upon Grid Logic s earlier models and provides guidance that will make the MIS technology more effective. The project model will be incorporated into Grid Logic s power control circuit of the MIS 3D printer product and its diagnostics technology to optimize the sintering process for part quality and energy efficiency.

  15. Electro-mechanical energy conversion system having a permanent magnet machine with stator, resonant transfer link and energy converter controls

    DOEpatents

    Skeist, S. Merrill; Baker, Richard H.

    2006-01-10

    An electro-mechanical energy conversion system coupled between an energy source and an energy load comprising an energy converter device including a permanent magnet induction machine coupled between the energy source and the energy load to convert the energy from the energy source and to transfer the converted energy to the energy load and an energy transfer multiplexer to control the flow of power or energy through the permanent magnetic induction machine.

  16. Rotational Energy Transfer of N2 Gas Determined Using a New Ab Initio Potential Energy Surface

    NASA Technical Reports Server (NTRS)

    Huo, Winifred M.; Stallcop, James R.; Partridge, Harry; Langhoff, Stephen R. (Technical Monitor)

    1997-01-01

    Rotational energy transfer between two N2 molecules is a fundamental process of some importance. Exchange is expected to play a role, but its importance is somewhat uncertain. Rotational energy transfer cross sections of N2 also have applications in many other fields including modeling of aerodynamic flows, laser operations, and linewidth analysis in nonintrusive laser diagnostics. A number of N2-N2 rigid rotor potential energy surface (PES) has been reported in the literature.

  17. Triplet-Triplet Energy Transfer Study in Hydrogen Bonding Systems.

    PubMed

    Wang, Zhijia; Zhao, Jianzhang; Guo, Song

    2015-01-01

    The 2,6-diiodoBodipy-styrylBodipy hydrogen bonding system was prepared to study the effect of hydrogen bonding on the triplet-triplet-energy-transfer (TTET) process. 2,6-DiiodoBodipy linked with N-acetyl-2,6-diaminopyridine (D-2) was used as the triplet energy donor, and the styrylBodipy connected with thymine (A-1) was used as triplet energy acceptor, thus the TTET process was established upon photoexcitation. The photophysical processes of the hydrogen bonding system were studied with steady-state UV-vis absorption spectroscopy, fluorescence spectroscopy, fluorescence lifetime measurement and nanosecond time-resolved transient absorption spectroscopies. The TTET of the intramolecular/hydrogen bonding/intermolecular systems were compared through nanosecond transient absorption spectroscopy. The TTET process of the hydrogen bonding system is faster and more efficient (kTTET = 6.9 × 10(4) s(-1), ΦTTET = 94.0%) than intermolecular triplet energy transfer (kTTET = 6.0 × 10(4) s(-1), ΦTTET = 90.9%), but slower and less efficient than intramolecular triplet energy transfer (kTTET > 10(8) s(-1)). These results are valuable for designing self-assembly triplet photosensitizers and for the study of the TTET process of hydrogen bonding systems.

  18. The Role of Resonant Vibrations in Electronic Energy Transfer

    PubMed Central

    Somsen, Oscar J. G.; Novoderezhkin, Vladimir I.; Mančal, Tomáš; van Grondelle, Rienk

    2016-01-01

    Abstract Nuclear vibrations play a prominent role in the spectroscopy and dynamics of electronic systems. As recent experimental and theoretical studies suggest, this may be even more so when vibrational frequencies are resonant with transitions between the electronic states. Herein, a vibronic multilevel Redfield model is reported for excitonically coupled electronic two‐level systems with a few explicitly included vibrational modes and interacting with a phonon bath. With numerical simulations the effects of the quantized vibrations on the dynamics of energy transfer and coherence in a model dimer are illustrated. The resonance between the vibrational frequency and energy gap between the sites leads to a large delocalization of vibronic states, which then results in faster energy transfer and longer‐lived mixed coherences. PMID:26910485

  19. Long range energy transfer in graphene hybrid structures

    NASA Astrophysics Data System (ADS)

    Gonçalves, Hugo; Bernardo, César; Moura, Cacilda; Ferreira, R. A. S.; André, P. S.; Stauber, Tobias; Belsley, Michael; Schellenberg, Peter

    2016-08-01

    In this work we quantify the distance dependence for the extraction of energy from excited chromophores by a single layer graphene flake over a large separation range. To this end hybrid structures were prepared, consisting of a thin (2 nm) layer of a polymer matrix doped with a well chosen strongly fluorescent organic molecule, followed by an un-doped spacer layer of well-defined thicknesses made of the same polymer material and an underlying single layer of pristine, undoped graphene. The coupling strength is assessed through the variation of the fluorescence decay kinetics as a function of distance between the graphene and the excited chromophore molecules. Non-radiative energy transfer to the graphene was observed at distances of up to 60 nm a range much greater than typical energy transfer distances observed in molecular systems.

  20. Analysis of medium-energy transfers to the Moon

    NASA Astrophysics Data System (ADS)

    Oshima, Kenta; Topputo, Francesco; Campagnola, Stefano; Yanao, Tomohiro

    2016-09-01

    This study analyzes a recently discovered class of exterior transfers to the Moon. These transfers terminate in retrograde ballistic capture orbits, i.e., orbits with negative Keplerian energy and angular momentum with respect to the Moon. Yet, their Jacobi constant is relatively low, for which no forbidden regions exist, and the trajectories do not appear to mimic the dynamics of the invariant manifolds of the Lagrange points. This paper shows that these orbits shadow instead lunar collision orbits. We investigate the dynamics of singular, lunar collision orbits in the Earth-Moon planar circular restricted three-body problem, and reveal their rich phase space structure in the medium-energy regime, where invariant manifolds of the Lagrange point orbits break up. We show that lunar retrograde ballistic capture trajectories lie inside the tube structure of collision orbits. We also develop a method to compute medium-energy transfers by patching together orbits inside the collision tube and those whose apogees are located in the appropriate quadrant in the Sun-Earth system. The method yields the novel family of transfers as well as those ending in direct capture orbits, under particular energetic and geometrical conditions.

  1. DNA chips with conjugated polyelectrolytes in resonance energy transfer mode.

    PubMed

    Wigenius, Jens A; Magnusson, Karin; Björk, Per; Andersson, Olof; Inganäs, Olle

    2010-03-01

    We show how to use well-defined conjugated polyelectrolytes (CPEs) combined with surface energy patterning to fabricate DNA chips utilizing fluorescence signal amplification. Cholesterol-modified DNA strands in complex with a CPE are adsorbed to a surface energy pattern, formed by printing with soft elastomer stamps. Hybridization of the surface bound DNA strands with a short complementary strand from solution is monitored using both fluorescence microscopy and imaging surface plasmon resonance. The CPEs act as antennas, enhancing resonance energy transfer to the dye-labeled DNA when complementary hybridization of the double strand occurs.

  2. Coherent or hopping like energy transfer in the chlorosome ?

    SciTech Connect

    Nalbach, Peter

    2014-08-20

    Chlorosomes, as part of the light-harvesting system of green bacteria, are the largest and most efficient antennae systems in nature. We have studied energy transfer dynamics in the chlorosome in a simplified toy model employing a master equation. Dephasing and relaxation due to environmental fluctuations are included by Lindblad dephasing and Redfield thermalization rates. We find at room temperature three separate time scales, i.e. 25 fs, 250 fs and 2.5 ps and determine the according energy pathways through the hierarchical structure in the chlorosome. Quantum coherence lives up to 150 fs at which time the energy is spread over roughly 12 pigments in our model.

  3. K/S Lambert problem. [energy requirements for transfer orbits

    NASA Technical Reports Server (NTRS)

    Jezewski, D. J.

    1975-01-01

    The Lambert problem in orbital mechanics is formulated in Kustaanheimo/Stiefel variables. The problem is to determine the required energy and the value of the generalized eccentric anomaly such that a particle at the initial position vector will transfer to the final position vector in a physical time interval. The fictitious time solution results in two nonlinear equations in the two unknowns, energy and fictitious time. The generalized eccentric anomaly solution, however, results in only one nonlinear equation in the one unknown, the eccentric anomaly. This simplification is possible because the energy equation is separable in the eccentric anomaly formulation.

  4. Molding resonant energy transfer by colloidal crystal: Dexter transfer and electroluminescence

    NASA Astrophysics Data System (ADS)

    González-Urbina, Luis; Kolaric, Branko; Libaers, Wim; Clays, Koen

    2010-05-01

    Building photonic crystals by combination of colloidal ordering and metal sputtering we were able to construct a system sensitive to an electrical field. In corresponding crystals we embedded the Dexter pair (Ir(ppy3) and BAlq) and investigated the influence of the band gap on the resonant energy transfer when the system is excited by light and by an electric field respectively. Our investigations extend applications of photonic crystals into the field of electroluminescence and LED technologies.

  5. Removing energy from a beverage influences later food intake more than the same energy addition.

    PubMed

    McCrickerd, K; Salleh, N B; Forde, C G

    2016-10-01

    Designing reduced-calorie foods and beverages without compromising their satiating effect could benefit weight management, assuming that consumers do not compensate for the missing calories at other meals. Though research has demonstrated that compensation for overfeeding is relatively limited, the extent to which energy reductions trigger adjustments in later food intake is less clear. The current study tested satiety responses (characterised by changes in appetite and later food intake) to both a covert 200 kcal reduction and an addition of maltodextrin to a soymilk test beverage. Twenty-nine healthy male participants were recruited to consume three sensory-matched soymilk beverages across four non-consecutive study days: a medium energy control (ME: 300 kcal) and a lower energy (LE: 100 kcal) and higher energy (HE: 500 kcal) version. The ME control was consumed twice to assess individual consistency in responses to this beverage. Participants were unaware of the energy differences across the soymilks. Lunch intake 60 min later increased in response to the LE soymilk, but was unchanged after consuming the HE version. These adjustments accounted for 40% of the energy removed from the soymilk and 13% of the energy added in. Rated appetite was relatively unaffected by the soymilk energy content. No further adjustments were noted for the rest of the day. These data suggest that adult men tested were more sensitive to calorie dilution than calorie addition to a familiar beverage.

  6. Removing energy from a beverage influences later food intake more than the same energy addition.

    PubMed

    McCrickerd, K; Salleh, N B; Forde, C G

    2016-10-01

    Designing reduced-calorie foods and beverages without compromising their satiating effect could benefit weight management, assuming that consumers do not compensate for the missing calories at other meals. Though research has demonstrated that compensation for overfeeding is relatively limited, the extent to which energy reductions trigger adjustments in later food intake is less clear. The current study tested satiety responses (characterised by changes in appetite and later food intake) to both a covert 200 kcal reduction and an addition of maltodextrin to a soymilk test beverage. Twenty-nine healthy male participants were recruited to consume three sensory-matched soymilk beverages across four non-consecutive study days: a medium energy control (ME: 300 kcal) and a lower energy (LE: 100 kcal) and higher energy (HE: 500 kcal) version. The ME control was consumed twice to assess individual consistency in responses to this beverage. Participants were unaware of the energy differences across the soymilks. Lunch intake 60 min later increased in response to the LE soymilk, but was unchanged after consuming the HE version. These adjustments accounted for 40% of the energy removed from the soymilk and 13% of the energy added in. Rated appetite was relatively unaffected by the soymilk energy content. No further adjustments were noted for the rest of the day. These data suggest that adult men tested were more sensitive to calorie dilution than calorie addition to a familiar beverage. PMID:27356202

  7. Regulation control and energy management scheme for wireless power transfer

    SciTech Connect

    Miller, John M.

    2015-12-29

    Power transfer rate at a charging facility can be maximized by employing a feedback scheme. The state of charge (SOC) and temperature of the regenerative energy storage system (RESS) pack of a vehicle is monitored to determine the load due to the RESS pack. An optimal frequency that cancels the imaginary component of the input impedance for the output signal from a grid converter is calculated from the load of the RESS pack, and a frequency offset f* is made to the nominal frequency f.sub.0 of the grid converter output based on the resonance frequency of a magnetically coupled circuit. The optimal frequency can maximize the efficiency of the power transfer. Further, an optimal grid converter duty ratio d* can be derived from the charge rate of the RESS pack. The grid converter duty ratio d* regulates wireless power transfer (WPT) power level.

  8. Reduced density matrix hybrid approach: application to electronic energy transfer.

    PubMed

    Berkelbach, Timothy C; Markland, Thomas E; Reichman, David R

    2012-02-28

    Electronic energy transfer in the condensed phase, such as that occurring in photosynthetic complexes, frequently occurs in regimes where the energy scales of the system and environment are similar. This situation provides a challenge to theoretical investigation since most approaches are accurate only when a certain energetic parameter is small compared to others in the problem. Here we show that in these difficult regimes, the Ehrenfest approach provides a good starting point for a dynamical description of the energy transfer process due to its ability to accurately treat coupling to slow environmental modes. To further improve on the accuracy of the Ehrenfest approach, we use our reduced density matrix hybrid framework to treat the faster environmental modes quantum mechanically, at the level of a perturbative master equation. This combined approach is shown to provide an efficient and quantitative description of electronic energy transfer in a model dimer and the Fenna-Matthews-Olson complex and is used to investigate the effect of environmental preparation on the resulting dynamics.

  9. Effects of nitrate addition and iron speciation on trace element transfer in coastal food webs under phosphate and iron enrichment.

    PubMed

    Li, Shun-Xing; Liu, Feng-Jiao; Zheng, Feng-Ying; Zuo, Yue-Gang; Huang, Xu-Guang

    2013-06-01

    Coastal organisms are often exposed to both iron enrichment and eutrophication. Trace elements transfer in coastal food webs are critical for marine life and therefore influence coastal ecosystem function and the global carbon cycle. However, how these exposures affect algal element uptake and the subsequent element transfer to marine copepods (Tigriopus japonicus) is unknown. Here we investigated the effects of nitrate addition and iron speciation (Fe (OH)3 or EDTA-Fe) on the biological uptake of Cu, Zn, and Se under phosphate and iron enrichment, using Thalassiosira weissflogii, Skeletonema costatum, and Chlorella vulgaris as model marine algae. Algal element adsorption/absorption generally increased with increasing macronutrient concentrations. Algal element assimilation efficiencies depended on iron speciation and marine algae species. Element assimilation efficiencies of copepods were significantly correlated to the intracellular element concentrations in algal cells. Element uptake and transfer were controlled by eutrophication, iron speciation, and algal species in coastal food webs.

  10. Effects of nitrate addition and iron speciation on trace element transfer in coastal food webs under phosphate and iron enrichment.

    PubMed

    Li, Shun-Xing; Liu, Feng-Jiao; Zheng, Feng-Ying; Zuo, Yue-Gang; Huang, Xu-Guang

    2013-06-01

    Coastal organisms are often exposed to both iron enrichment and eutrophication. Trace elements transfer in coastal food webs are critical for marine life and therefore influence coastal ecosystem function and the global carbon cycle. However, how these exposures affect algal element uptake and the subsequent element transfer to marine copepods (Tigriopus japonicus) is unknown. Here we investigated the effects of nitrate addition and iron speciation (Fe (OH)3 or EDTA-Fe) on the biological uptake of Cu, Zn, and Se under phosphate and iron enrichment, using Thalassiosira weissflogii, Skeletonema costatum, and Chlorella vulgaris as model marine algae. Algal element adsorption/absorption generally increased with increasing macronutrient concentrations. Algal element assimilation efficiencies depended on iron speciation and marine algae species. Element assimilation efficiencies of copepods were significantly correlated to the intracellular element concentrations in algal cells. Element uptake and transfer were controlled by eutrophication, iron speciation, and algal species in coastal food webs. PMID:23332676

  11. Structure and energy transfer in photosystems of oxygenic photosynthesis.

    PubMed

    Nelson, Nathan; Junge, Wolfgang

    2015-01-01

    Oxygenic photosynthesis is the principal converter of sunlight into chemical energy on Earth. Cyanobacteria and plants provide the oxygen, food, fuel, fibers, and platform chemicals for life on Earth. The conversion of solar energy into chemical energy is catalyzed by two multisubunit membrane protein complexes, photosystem I (PSI) and photosystem II (PSII). Light is absorbed by the pigment cofactors, and excitation energy is transferred among the antennae pigments and converted into chemical energy at very high efficiency. Oxygenic photosynthesis has existed for more than three billion years, during which its molecular machinery was perfected to minimize wasteful reactions. Light excitation transfer and singlet trapping won over fluorescence, radiation-less decay, and triplet formation. Photosynthetic reaction centers operate in organisms ranging from bacteria to higher plants. They are all evolutionarily linked. The crystal structure determination of photosynthetic protein complexes sheds light on the various partial reactions and explains how they are protected against wasteful pathways and why their function is robust. This review discusses the efficiency of photosynthetic solar energy conversion.

  12. Modelling excitonic-energy transfer in light-harvesting complexes

    SciTech Connect

    Kramer, Tobias; Kreisbeck, Christoph

    2014-01-08

    The theoretical and experimental study of energy transfer in photosynthesis has revealed an interesting transport regime, which lies at the borderline between classical transport dynamics and quantum-mechanical interference effects. Dissipation is caused by the coupling of electronic degrees of freedom to vibrational modes and leads to a directional energy transfer from the antenna complex to the target reaction-center. The dissipative driving is robust and does not rely on fine-tuning of specific vibrational modes. For the parameter regime encountered in the biological systems new theoretical tools are required to directly compare theoretical results with experimental spectroscopy data. The calculations require to utilize massively parallel graphics processor units (GPUs) for efficient and exact computations.

  13. High-resolution and Monte Carlo additions to the SASKTRAN radiative transfer model

    NASA Astrophysics Data System (ADS)

    Zawada, D. J.; Dueck, S. R.; Rieger, L. A.; Bourassa, A. E.; Lloyd, N. D.; Degenstein, D. A.

    2015-06-01

    The Optical Spectrograph and InfraRed Imaging System (OSIRIS) instrument on board the Odin spacecraft has been measuring limb-scattered radiance since 2001. The vertical radiance profiles measured as the instrument nods are inverted, with the aid of the SASKTRAN radiative transfer model, to obtain vertical profiles of trace atmospheric constituents. Here we describe two newly developed modes of the SASKTRAN radiative transfer model: a high-spatial-resolution mode and a Monte Carlo mode. The high-spatial-resolution mode is a successive-orders model capable of modelling the multiply scattered radiance when the atmosphere is not spherically symmetric; the Monte Carlo mode is intended for use as a highly accurate reference model. It is shown that the two models agree in a wide variety of solar conditions to within 0.2 %. As an example case for both models, Odin-OSIRIS scans were simulated with the Monte Carlo model and retrieved using the high-resolution model. A systematic bias of up to 4 % in retrieved ozone number density between scans where the instrument is scanning up or scanning down was identified. The bias is largest when the sun is near the horizon and the solar scattering angle is far from 90°. It was found that calculating the multiply scattered diffuse field at five discrete solar zenith angles is sufficient to eliminate the bias for typical Odin-OSIRIS geometries.

  14. High resolution and Monte Carlo additions to the SASKTRAN radiative transfer model

    NASA Astrophysics Data System (ADS)

    Zawada, D. J.; Dueck, S. R.; Rieger, L. A.; Bourassa, A. E.; Lloyd, N. D.; Degenstein, D. A.

    2015-03-01

    The OSIRIS instrument on board the Odin spacecraft has been measuring limb scattered radiance since 2001. The vertical radiance profiles measured as the instrument nods are inverted, with the aid of the SASKTRAN radiative transfer model, to obtain vertical profiles of trace atmospheric constituents. Here we describe two newly developed modes of the SASKTRAN radiative transfer model: a high spatial resolution mode, and a Monte Carlo mode. The high spatial resolution mode is a successive orders model capable of modelling the multiply scattered radiance when the atmosphere is not spherically symmetric; the Monte Carlo mode is intended for use as a highly accurate reference model. It is shown that the two models agree in a wide variety of solar conditions to within 0.2%. As an example case for both models, Odin-OSIRIS scans were simulated with the Monte Carlo model and retrieved using the high resolution model. A systematic bias of up to 4% in retrieved ozone number density between scans where the instrument is scanning up or scanning down was identified. It was found that calculating the multiply scattered diffuse field at five discrete solar zenith angles is sufficient to eliminate the bias for typical Odin-OSIRIS geometries.

  15. Energy transfer processes in solar energy conversion. Final report

    SciTech Connect

    Fayer, M.D.

    1984-01-01

    The following were studied experimentally and/or theoretically: dynamics of energy transport and trapping in two-component systems (using rhodamine 6G and malachite green as traps), electronic excited state transport among molecules randomly distributed in a finite volume, electronic excitation transport in polymer systems, and excitation transport in synthetic Zn-chlorophyllide substituted hemoglobin. (DLC)

  16. Detection of programmed cell death using fluorescence energy transfer.

    PubMed Central

    Xu, X; Gerard, A L; Huang, B C; Anderson, D C; Payan, D G; Luo, Y

    1998-01-01

    Fluorescence energy transfer (FRET) can be generated when green fluorescent protein (GFP) and blue fluorescent protein (BFP) are covalently linked together by a short peptide. Cleavage of this linkage by protease completely eliminates FRET effect. Caspase-3 (CPP32) is an important cellular protease activated during programmed cell death. An 18 amino acid peptide containing CPP32 recognition sequence, DEVD, was used to link GFP and BFP together. CPP32 activation can be monitored by FRET assay during the apoptosis process. PMID:9518501

  17. Response of silicon-Based Linear Energy Transfer Spectrometers

    NASA Technical Reports Server (NTRS)

    Aman, A.; Bman, B.; Badhwar, G. D.; ONeill, P. M. O.

    2000-01-01

    Silicon-based linear energy transfer (LET) telescope,(e. g., DOSTEL and RRMD) have recently been flown in space. LET spectra measured using tissue equivalent proportional counters show differences that need to be fully understood. A Monte Carlo technique based on: 1. radiation transport cluster intra-cascade model. 2. Landau-Vavilov distribution, 3. telescope geometry and detector coincidence & discriminator settings, 4. spacecraft shielding geometry, and 5. the external free space radiation environment, including recent albedo measurements, was developed.

  18. Carotenoid charge transfer states and their role in energy transfer processes in LH1-RC complexes from aerobic anoxygenic phototrophs.

    PubMed

    Šlouf, Václav; Fuciman, Marcel; Dulebo, Alexander; Kaftan, David; Koblížek, Michal; Frank, Harry A; Polívka, Tomáš

    2013-09-26

    Light-harvesting complexes ensure necessary flow of excitation energy into photosynthetic reaction centers. In the present work, transient absorption measurements were performed on LH1-RC complexes isolated from two aerobic anoxygenic phototrophs (AAPs), Roseobacter sp. COL2P containing the carotenoid spheroidenone, and Erythrobacter sp. NAP1 which contains the carotenoids zeaxanthin and bacteriorubixanthinal. We show that the spectroscopic data from the LH1-RC complex of Roseobacter sp. COL2P are very similar to those previously reported for Rhodobacter sphaeroides, including the transient absorption spectrum originating from the intramolecular charge-transfer (ICT) state of spheroidenone. Although the ICT state is also populated in LH1-RC complexes of Erythrobacter sp. NAP1, its appearance is probably related to the polarity of the bacteriorubixanthinal environment rather than to the specific configuration of the carotenoid, which we hypothesize is responsible for populating the ICT state of spheroidenone in LH1-RC of Roseobacter sp. COL2P. The population of the ICT state enables efficient S1/ICT-to-bacteriochlorophyll (BChl) energy transfer which would otherwise be largely inhibited for spheroidenone and bacteriorubixanthinal due to their low energy S1 states. In addition, the triplet states of these carotenoids appear well-tuned for efficient quenching of singlet oxygen or BChl-a triplets, which is of vital importance for oxygen-dependent organisms such as AAPs. PMID:23130956

  19. Disk-to-disk transfer as the rate-limiting step for energy flow in phycobilisomes

    SciTech Connect

    Glazer, A.N.; Yeh, S.W.; Webb, S.P.; Clark, J.H.

    1985-01-25

    A broadly tunable picosecond laser source and an ultrafast streak camera were used to measure temporally and spectrally resolved emission from intact phycobilisomes and from individual phycobiliproteins as a function of excitation wavelength. Both wild-type and mutant phycobilisomes of the unicellular cyanobacterium Synechocystis 6701 were examined, as well as two biliproteins, R-phycoerythrin (240 kilodaltons, 34 bilins) and allophycocyanin (100 kilodaltons, 6 bilins). Measurements of intact phycobilisomes with known structural differences showed that the addition of an average of 1.6 phycoerythrin disks in the phycobilisome rod increased the overall energy transfer time by 30 +/- 5 picoseconds. In the isolated phycobiliproteins the onset of emission was as prompt as that of a solution of rhodamine B laser dye and was independent of excitation wavelength. This imposes an upper limit of 8 picoseconds (instrument-limited) on the transfer time from sensitizing to fluorescing chromophores in these biliproteins. These results indicate that disk-to-disk transfer is the slowest energy transfer process in phycobilisomes and, in combination with previous structural analyses, show that with respect to energy transfer the lattice of approximately 625 light-harvesting chromophores in the Synechocystis 6701 wild-type phycobilisome functions as a linear five-point array.

  20. Modeling coherent excitation energy transfer in photosynthetic light harvesting systems

    NASA Astrophysics Data System (ADS)

    Huo, Pengfei

    2011-12-01

    Recent non-linear spectroscopy experiments suggest the excitation energy transfer in some biological light harvesting systems initially occurs coherently. Treating such processes brings significant challenge for conventional theoretical tools that usually involve different approximations. In this dissertation, the recently developed Iterative Linearized Density Matrix (ILDM) propagation scheme, which is non-perturbative and non-Markovian is extended to study coherent excitation energy transfer in various light harvesting complexes. It is demonstrated that the ILDM approach can successfully describe the coherent beating of the site populations on model systems and gives quantitative agreement with both experimental results and the results of other theoretical methods have been developed recently to going beyond the usual approximations, thus providing a new reliable theoretical tool to study this phenomenon. This approach is used to investigate the excited energy transfer dynamics in various experimentally studied bacteria light harvesting complexes, such as Fenna-Matthews-Olsen (FMO) complex, Phycocyanin 645 (PC645). In these model calculations, quantitative agreement is found between computed de-coherence times and quantum beating pattens observed in the non-linear spectroscopy. As a result of these studies, it is concluded that the stochastic resonance behavior is important in determining the optimal throughput. To begin addressing possible mechanics for observed long de-coherence time, various models which include correlation between site energy fluctuations as well as correlation between site energy and inter-site coupling are developed. The influence of both types of correlation on the coherence and transfer rate is explored using with a two state system-bath hamiltonian parametrized to model the reaction center of Rhodobacter sphaeroides bacteria. To overcome the disadvantages of a fully reduced approach or a full propagation method, a brownian dynamics

  1. Energy release and transfer in guide field reconnection

    NASA Astrophysics Data System (ADS)

    Birn, J.; Hesse, M.

    2010-01-01

    Properties of energy release and transfer by magnetic reconnection in the presence of a guide field are investigated on the basis of 2.5-dimensional magnetohydrodynamic (MHD) and particle-in-cell (PIC) simulations. Two initial configurations are considered: a plane current sheet with a uniform guide field of 80% of the reconnecting magnetic field component and a force-free current sheet in which the magnetic field strength is constant but the field direction rotates by 180° through the current sheet. The onset of reconnection is stimulated by localized, temporally limited compression. Both MHD and PIC simulations consistently show that the outgoing energy fluxes are dominated by (redirected) Poynting flux and enthalpy flux, whereas bulk kinetic energy flux and heat flux (in the PIC simulation) are small. The Poynting flux is mainly associated with the magnetic energy of the guide field which is carried from inflow to outflow without much alteration. The conversion of annihilated magnetic energy to enthalpy flux (that is, thermal energy) stems mainly from the fact that the outflow occurs into a closed field region governed by approximate force balance between Lorentz and pressure gradient forces. Therefore, the energy converted from magnetic to kinetic energy by Lorentz force acceleration becomes immediately transferred to thermal energy by the work done by the pressure gradient force. Strong similarities between late stages of MHD and PIC simulations result from the fact that conservation of mass and entropy content and footpoint displacement of magnetic flux tubes, imposed in MHD, are also approximately satisfied in the PIC simulations.

  2. Understanding Protein Folding from Advances of Fluorescence Energy Transfer.

    NASA Astrophysics Data System (ADS)

    Tcherkasskaya, Olga; Gronenborn, Angela M.

    2001-03-01

    A multi-site fluorescence energy transfer method was developed for the study of protein folding. Technique uses "tyrosine-phenylalanine" substitution mutagenesis to place the "tyrosine-guest" into positions of interest into the protein structure. Tetranitromethane modification of the tyrosine-guest renders this amino acid an acceptor of the tryptophan fluorescence. This approach can be applied to any protein system, and, most importantly, does not require single- or double-labeling of the protein molecule by a donor and/or an acceptor fluorophore. It is equally suited for equilibrium as well as kinetic studies of folding. We tested the methodology to monitor the equilibrium (un)folding of the immunoglobulin binding domain B1 of streptococcal protein G (GB1) induced by guanidine hydrochloride. Wild-type GB1 contains three tyrosines located at positions 3, 33, 45 and a single tryptophan residue at position 43. Two of the three tyrosines were replaced in turn, thereby allowing us to measure the energy transfer from Trp43 to each particular tyrosine. Overall, multi-parametrical experiments on GB1 including circular dichroism, steady state and time-resolved fluorescence, as well as fluorescence energy transfer revealed the existence of highly stable unfolded intermediates, which precede the formation of the rigid (native) secondary structure.

  3. Resonant energy transfer based biosensor for detection of multivalent proteins.

    SciTech Connect

    Song, X.; Swanson, Basil I.

    2001-01-01

    We have developed a new fluorescence-based biosensor for sensitive detection of species involved in a multivslent interaction. The biosensor system utilizes specific interactions between proteins and cell surface receptors, which trigger a receptor aggregation process. Distance-dependent fluorescence self-quenching and resonant energy transfer mechanisms were coupled with a multivalent interaction to probe the receptor aggregation process, providing a sensitive and specific signal transduction method for such a binding event. The fluorescence change induced by the aggregation process can be monitored by different instrument platforms, e.g. fluorimetry and flow cytometry. In this article, a sensitive detection of pentavalent cholera toxin which recognizes ganglioside GM1 has been demonstrated through the resonant energy transfer scheme, which can achieve a double color change simultaneously. A detection sensitivity as high as 10 pM has been achieved within a few minutes (c.a. 5 minutes). The simultaneous double color change (an increase of acceptor fluorescence and a decrease of donor fluorescence intensity) of two similar fluorescent probes provides particularly high detection reliability owing to the fact that they act as each other's internal reference. Any external perturbation such as environmental temperature change causes no significant change in signal generation. Besides the application for biological sensing, the method also provides a useful tool for investigation of kinetics and thermodynamics of a multivalent interaction. Keywords: Biosensor, Fluorescence resonant energy transfer, Multivalent interaction, Cholera Toxin, Ganglioside GM1, Signal Transduction

  4. Homopolar machine for reversible energy storage and transfer systems

    DOEpatents

    Stillwagon, Roy E.

    1981-01-01

    A homopolar machine designed to operate as a generator and motor in reversibly storing and transferring energy between the machine and a magnetic load coil for a thermo-nuclear reactor. The machine rotor comprises hollow thin-walled cylinders or sleeves which form the basis of the system by utilizing substantially all of the rotor mass as a conductor thus making it possible to transfer substantially all the rotor kinetic energy electrically to the load coil in a highly economical and efficient manner. The rotor is divided into multiple separate cylinders or sleeves of modular design, connected in series and arranged to rotate in opposite directions but maintain the supply of current in a single direction to the machine terminals. A stator concentrically disposed around the sleeves consists of a hollow cylinder having a number of excitation coils each located radially outward from the ends of adjacent sleeves. Current collected at an end of each sleeve by sleeve slip rings and brushes is transferred through terminals to the magnetic load coil. Thereafter, electrical energy returned from the coil then flows through the machine which causes the sleeves to motor up to the desired speed in preparation for repetition of the cycle. To eliminate drag on the rotor between current pulses, the brush rigging is designed to lift brushes from all slip rings in the machine.

  5. Homopolar machine for reversible energy storage and transfer systems

    DOEpatents

    Stillwagon, Roy E.

    1978-01-01

    A homopolar machine designed to operate as a generator and motor in reversibly storing and transferring energy between the machine and a magnetic load coil for a thermo-nuclear reactor. The machine rotor comprises hollow thin-walled cylinders or sleeves which form the basis of the system by utilizing substantially all of the rotor mass as a conductor thus making it possible to transfer substantially all the rotor kinetic energy electrically to the load coil in a highly economical and efficient manner. The rotor is divided into multiple separate cylinders or sleeves of modular design, connected in series and arranged to rotate in opposite directions but maintain the supply of current in a single direction to the machine terminals. A stator concentrically disposed around the sleeves consists of a hollow cylinder having a number of excitation coils each located radially outward from the ends of adjacent sleeves. Current collected at an end of each sleeve by sleeve slip rings and brushes is transferred through terminals to the magnetic load coil. Thereafter, electrical energy returned from the coil then flows through the machine which causes the sleeves to motor up to the desired speed in preparation for repetition of the cycle. To eliminate drag on the rotor between current pulses, the brush rigging is designed to lift brushes from all slip rings in the machine.

  6. Energy and charge transfer in ionized argon coated water clusters

    SciTech Connect

    Kočišek, J. E-mail: michal.farnik@jh-inst.cas.cz Lengyel, J.; Fárník, M. E-mail: michal.farnik@jh-inst.cas.cz; Slavíček, P. E-mail: michal.farnik@jh-inst.cas.cz

    2013-12-07

    We investigate the electron ionization of clusters generated in mixed Ar-water expansions. The electron energy dependent ion yields reveal the neutral cluster composition and structure: water clusters fully covered with the Ar solvation shell are formed under certain expansion conditions. The argon atoms shield the embedded (H{sub 2}O){sub n} clusters resulting in the ionization threshold above ≈15 eV for all fragments. The argon atoms also mediate more complex reactions in the clusters: e.g., the charge transfer between Ar{sup +} and water occurs above the threshold; at higher electron energies above ∼28 eV, an excitonic transfer process between Ar{sup +}* and water opens leading to new products Ar{sub n}H{sup +} and (H{sub 2}O){sub n}H{sup +}. On the other hand, the excitonic transfer from the neutral Ar* state at lower energies is not observed although this resonant process was demonstrated previously in a photoionization experiment. Doubly charged fragments (H{sub 2}O){sub n}H{sub 2}{sup 2+} and (H{sub 2}O){sub n}{sup 2+} ions are observed and Intermolecular Coulomb decay (ICD) processes are invoked to explain their thresholds. The Coulomb explosion of the doubly charged cluster formed within the ICD process is prevented by the stabilization effect of the argon solvent.

  7. State-to-state dynamics of molecular energy transfer

    SciTech Connect

    Gentry, W.R.; Giese, C.F.

    1993-12-01

    The goal of this research program is to elucidate the elementary dynamical mechanisms of vibrational and rotational energy transfer between molecules, at a quantum-state resolved level of detail. Molecular beam techniques are used to isolate individual molecular collisions, and to control the kinetic energy of collision. Lasers are used both to prepare specific quantum states prior to collision by stimulated-emission pumping (SEP), and to measure the distribution of quantum states in the collision products by laser-induced fluorescence (LIF). The results are interpreted in terms of dynamical models, which may be cast in a classical, semiclassical or quantum mechanical framework, as appropriate.

  8. Optimizing energy transfer efficiency in highly branched nanoplasmonic waveguides

    NASA Astrophysics Data System (ADS)

    Voronine, Dmitri; Traverso, Andrew; Wang, Kai; Yi, Zhenhuan; Sokolov, Alexei

    2011-03-01

    Energy transfer in highly branched nanoplasmonic particle waveguides is simulated and optimized by varying the waveguide branching geometry and composition. The periodically branched nanostructures provide a new route towards efficient nanoscale light concentration and local field enhancement. On the one hand, they mimick the analogous randomly branched plasmonic nanostructures which have been previously used for surface-enhanced optical spectroscopy such as SERS. On the other hand, the design is inspired by branched molecular aggregates used for energy funneling. The proposed nanostructures may find applications in sensing, light harvesting and nanophotonics.

  9. Vibrational Energy Transfer of Diatomic Gases in Hypersonic Expanding Flows.

    NASA Astrophysics Data System (ADS)

    Ruffin, Stephen Merrick

    In high temperature flows related to vehicles at hypersonic speeds significant excitation of the vibrational energy modes of the gas can occur. Accurate predictions of the vibrational state of the gas and the rates of vibrational energy transfer are essential to achieve optimum engine performance, for design of heat shields, and for studies of ground based hypersonic test facilities. The Landau -Teller relaxation model is widely used because it has been shown to give accurate predictions in vibrationally heating flows such as behind forebody shocks. However, a number of experiments in nozzles have indicated that it fails to accurately predict the rate of energy transfer in expanding, or cooling, flow regions and fails to predict the distribution of energy in the vibrational quantum levels. The present study examines the range of applicability of the Landau -Teller model in expanding flows and develops techniques which provide accurate predictions in expanding flows. In the present study, detailed calculations of the vibrational relaxation process of N_2 and CO in cooling flows are conducted. A coupled set of vibrational transition rate equations and quasi one-dimensional fluid dynamic equations is solved. Rapid anharmonic Vibration-Translation transition rates and Vibration -Vibration exchange collisions are found to be responsible for vibrational relaxation acceleration in situations of high vibrational temperature and low translational temperature. The predictions of the detailed master equation solver are in excellent agreement with experimental results. The exact degree of acceleration is cataloged in this study for N_2 and is found to be a function of both the translational temperature (T) and the ratio of vibrational to translational temperatures (T_{vib}/T). Non-Boltzmann population distributions are observed for values of T _{vib}/T as low as 2.0. The local energy transfer rate is shown to be an order of magnitude or more faster than the Landau-Teller model

  10. Enhancing intermolecular benzoyl-transfer reactivity in crystals by growing a "reactive" metastable polymorph by using a chiral additive.

    PubMed

    Murali, Chebrolu; Shashidhar, Mysore S; Gonnade, Rajesh G; Bhadbhade, Mohan M

    2009-01-01

    Racemic 2,4-di-O-benzoyl-myo-inositol-1,3,5-orthoacetate, which normally crystallizes in a monoclinic form (form I, space group P2(1)/n) could be persuaded to crystallize out as a metastable polymorph (form II, space group C2/c) by using a small amount of either D- or L- 2,4-di-O-benzoyl-myo-inositol-1,3,5-orthoformate as an additive in the crystallization medium. The structurally similar enantiomeric additive was chosen by the scrutiny of previous experimental results on the crystallization of racemic 2,4-di-O-benzoyl-myo-inositol-1,3,5-orthoacetate. Form II crystals can be thermally transformed to form I crystals at about 145 degrees C. The relative organization of the molecules in these dimorphs vary slightly in terms of the helical assembly of molecules, that is, electrophile (El)...nucleophile (Nu) and C-H...pi interactions, but these minor variations have a profound effect on the facility and specificity of benzoyl-group-transfer reactivity in the two crystal forms. While form II crystals undergo a clean intermolecular benzoyl-group-transfer reaction, form I crystals are less reactive and undergo non-specific benzoyl-group transfer leading to a mixture of products. The role played by the additive in fine-tuning small changes that are required in the molecular packing opens up the possibility of creating new polymorphs that show varied physical and chemical properties. Crystals of D-2,6-di-O-benzoyl-myo-inositol-1,3,5-orthoformate (additive) did not show facile benzoyl-group-transfer reactivity (in contrast to the corresponding racemic compound) due to the lack of proper juxtaposition and assembly of molecules.

  11. Mechanistic and computational studies of the atom transfer radical addition of CCl4 to styrene catalyzed by copper homoscorpionate complexes.

    PubMed

    Muñoz-Molina, José María; Sameera, W M C; Álvarez, Eleuterio; Maseras, Feliu; Belderrain, Tomás R; Pérez, Pedro J

    2011-03-21

    Experimental as well as theoretical studies have been carried out with the aim of elucidating the mechanism of the atom transfer radical addition (ATRA) of styrene and carbon tetrachloride with a Tp(x)Cu(NCMe) complex as the catalyst precursor (Tp(x) = hydrotrispyrazolyl-borate ligand). The studies shown herein demonstrate the effect of different variables in the kinetic behavior. A mechanistic proposal consistent with theoretical and experimental data is presented.

  12. Modulating the electronic structure of chromophores by chemical substituents for efficient energy transfer: application to fluorone.

    PubMed

    Sand, Andrew M; Liu, Claire; Valentine, Andrew J S; Mazziotti, David A

    2014-08-01

    Strong electron correlation within a quasi-spin model of chromophores was recently shown to enhance exciton energy transfer significantly. Here we investigate how the modulation of the electronic structure of the chromophores by chemical substitution can enhance energy-transfer efficiency. Unlike previous work that does not consider the direct effect of the electronic structure on exciton dynamics, we add chemical substituents to the fluorone dimer to study the effect of electron-donating and electron-withdrawing substituents on exciton energy transfer. The exciton dynamics are studied from the solution of a quantum Liouville equation for an open system whose model Hamiltonian is derived from excited-state electronic structure calculations. Both van der Waals energies and coupling energies, arising from the Hellmann-Feynman force generated upon transferring the dimers from infinity to a finite separation, are built into the model Hamiltonian. Though these two effects are implicitly treated in dipole-based models, their explicit and separate treatment as discussed here is critical to forging the correct connection with the electronic structure calculations. We find that the addition of electron-donating substituents to the fluorone system results in an increase in exciton-transfer rates by factors ranging from 1.3-1.9. The computed oscillator strength is consistent with the recent experimental results on a larger heterodimer system containing fluorone. The oscillator strength increases with the addition of electron-donating substituents. Our results indicate that the study of chromophore networks via electronic structure will help in the future design of efficient synthetic light-harvesting systems. PMID:25062094

  13. Rotational And Rovibrational Energy Transfer In Electron Collisions With Molecules

    NASA Technical Reports Server (NTRS)

    Thuemmel, Helmar T.; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    Air flows around a hypervelocity reentry vehicle undergo dissociation, rovibrational excitation and ionization. More specifically the air, initially 80% N2 and 20% O2, in the shock layer consists of species such as N, O, N2, O2, NO, N+, O+, N+, O+, NO+ and 2 free electrons. It was pointed out in multi temperature models'' that the temperature of the rotational energy modes and the gas-kinetic translational temperature are quickly equilibrated by a few collisions and rise rapidly to high temperatures as 50000K before falling off to equilibrium value of 10000K. Contrary, the electronic and vibrational temperatures state energy distributions remain low (less than 15000K) because of the slow equilibration. Electron vibrational energy transfer is thought to play a crucial role in such a ionizing flow regime since chemical reaction rates and dissociation depend strongly on the vibrational temperatures. Modeling of these flowfields in principle require the rovibrational excitation and de-excitation cross section data for average electron energies from threshold up to several eV (leV=11605.4 K). In this lecture we focus on theoretical description of rotational effects i.e. energy transfer of electrons to molecules such that the molecular rotational (vojo goes to voj) or vibrational and rotational (v(sub 0)j(sub 0) goes to vj) states are changed. Excitation and de-excitation of electronic states was discussed in a previous talk at this conference.

  14. Preliminary investigation into the design of thermally responsive Forster resonance energy transfer colloids

    NASA Astrophysics Data System (ADS)

    Bedford, Monte Scott

    While nuclear imaging techniques (Magnetic Resonance Imaging, Computed Tomography, and Positron Emission Tomography) have proven effective for diagnosis and treatment of disease in the human body, fluorescence-enhanced optical imaging offers additional benefits. Fluorescent imaging provides high resolution with real-time response, persistent lifetime (hours to days), cell targeting, and transdermal penetration with minimal physical encumbrance. Malignant cells can be targeted by absorbance of exogenous fluorescent nanoprobe contrast agents. Imaging is improved by fluorescent enhancement, especially by energy transfer between attached dyes. Also for use against cancer are heat-active treatments, such as hyperthermal, photothermal, and chemothermal therapies. Helpful to these treatments is the thermal response from nanoprobes, within human cells, which provide real-time feedback. The present study investigates the design and feasibility of a nanoprobe molecular device, absorbable into malignant human cells, which provides real-time tracking and thermal response, as indicated by enhanced fluorescence by energy transfer. A poly(propargyl acrylate) colloidal suspension was synthesized. The particles were modified with a triblock copolymer, previously shown to be thermally responsive, and an end-attached fluorescent dye. A second dye was modeled for attachment in subsequent work. When two fluorescent dyes are brought within sufficiently close proximity, and excitation light is supplied, energy can be transferred between dyes to give enhanced fluorescence with a large Stokes shift (increase in wavelength between excitation and emission). The dye pair was modeled for overlap of emission and absorbance wavelengths, and energy transfer was demonstrated with 23% efficiency and a 209 nm Stokes shift. The quantum yield of the donor dye was determined at 70%, and the distance for 50% energy transfer was calculated at 2.9 nm, consistent with reports for similar compounds. When

  15. Micro-beam friction liner and method of transferring energy

    DOEpatents

    Mentesana, Charles

    2007-07-17

    A micro-beam friction liner adapted to increase performance and efficiency and reduce wear in a piezoelectric motor or actuator or other device using a traveling or standing wave to transfer energy in the form of torque and momentum. The micro-beam friction liner comprises a dense array of micro-beam projections having first ends fixed relative to a rotor and second ends projecting substantially toward a plurality of teeth of a stator, wherein the micro-beam projections are compressed and bent during piezoelectric movement of the stator teeth, thereby storing the energy, and then react against the stator teeth to convert the stored energy stored to rotational energy in the rotor.

  16. Heat transfer and flow in solar energy and bioenergy systems

    NASA Astrophysics Data System (ADS)

    Xu, Ben

    The demand for clean and environmentally benign energy resources has been a great concern in the last two decades. To alleviate the associated environmental problems, reduction of the use of fossil fuels by developing more cost-effective renewable energy technologies becomes more and more significant. Among various types of renewable energy sources, solar energy and bioenergy take a great proportion. This dissertation focuses on the heat transfer and flow in solar energy and bioenergy systems, specifically for Thermal Energy Storage (TES) systems in Concentrated Solar Power (CSP) plants and open-channel algal culture raceways for biofuel production. The first part of this dissertation is the discussion about mathematical modeling, numerical simulation and experimental investigation of solar TES system. First of all, in order to accurately and efficiently simulate the conjugate heat transfer between Heat Transfer Fluid (HTF) and filler material in four different solid-fluid TES configurations, formulas of an e?ective heat transfer coe?cient were theoretically developed and presented by extending the validity of Lumped Capacitance Method (LCM) to large Biot number, as well as verifications/validations to this simplified model. Secondly, to provide design guidelines for TES system in CSP plant using Phase Change Materials (PCM), a general storage tank volume sizing strategy and an energy storage startup strategy were proposed using the enthalpy-based 1D transient model. Then experimental investigations were conducted to explore a novel thermal storage material. The thermal storage performances were also compared between this novel storage material and concrete at a temperature range from 400 °C to 500 °C. It is recommended to apply this novel thermal storage material to replace concrete at high operating temperatures in sensible heat TES systems. The second part of this dissertation mainly focuses on the numerical and experimental study of an open-channel algae

  17. Energy transfer and constrained simulations in isotropic turbulence

    NASA Technical Reports Server (NTRS)

    Jimenez, Javier

    1993-01-01

    The defining characteristic of turbulent flows is their ability to dissipate energy, even in the limit of zero viscosity. The Euler equations, if constrained in such a way that the velocity derivatives remain bounded, conserve energy. But when they arise as the limit of the Navier-Stokes (NS) equations, when the Reynolds number goes to infinity, there is persuasive empirical evidence that the gradients become singular as just the right function of Re for the dissipation to remain non-zero and to approach a well defined limit. It is generally believed that this limiting value of the dissipation is a property of the Euler equations themselves, independent of the particular dissipative mechanism involved, and that it can be normalized with the large scale properties of the turbulent flow (e.g. the kinetic energy per unit volume u'(exp 2)/2, and the integral scale L) without reference to the Reynolds number or to other dissipative quantities. This is usually taken to imply that the low wave number end of the energy spectrum, far from the dissipative range, is also independent of the particular mechanism chosen to dispose of the energy transfer. In the following sections, we present some numerical experiments on the effect of substituting different dissipation models into the truncated Euler equations. We will see that the effect is mainly felt in the 'near dissipation' range of the energy spectrum, but that this range can be quite wide in some cases, contaminating a substantial range of wave numbers. In the process, we will develop a 'practical' approximation to the subgrid energy transfer in isotropic turbulence, and we will gain insight into the structure of the nonlinear interactions among turbulent scales of comparable size, and into the nature of energy backscatter. Some considerations on future research directions are offered at the end.

  18. A stochastic reorganizational bath model for electronic energy transfer

    SciTech Connect

    Fujita, Takatoshi E-mail: aspuru@chemistry.harvard.edu; Huh, Joonsuk; Aspuru-Guzik, Alán E-mail: aspuru@chemistry.harvard.edu

    2014-06-28

    Environmentally induced fluctuations of the optical gap play a crucial role in electronic energy transfer dynamics. One of the simplest approaches to incorporate such fluctuations in energy transfer dynamics is the well known Haken-Strobl-Reineker (HSR) model, in which the energy-gap fluctuation is approximated as white noise. Recently, several groups have employed molecular dynamics simulations and excited-state calculations in conjunction to account for excitation energies’ thermal fluctuations. On the other hand, since the original work of HSR, many groups have employed stochastic models to simulate the same transfer dynamics. Here, we discuss a rigorous connection between the stochastic and the atomistic bath models. If the phonon bath is treated classically, time evolution of the exciton-phonon system can be described by Ehrenfest dynamics. To establish the relationship between the stochastic and atomistic bath models, we employ a projection operator technique to derive the generalized Langevin equations for the energy-gap fluctuations. The stochastic bath model can be obtained as an approximation of the atomistic Ehrenfest equations via the generalized Langevin approach. Based on this connection, we propose a novel scheme to take account of reorganization effects within the framework of stochastic models. The proposed scheme provides a better description of the population dynamics especially in the regime of strong exciton-phonon coupling. Finally, we discuss the effect of the bath reorganization in the absorption and fluorescence spectra of ideal J-aggregates in terms of the Stokes shifts. We find a simple expression that relates the reorganization contribution to the Stokes shifts – the reorganization shift – to the ideal or non-ideal exciton delocalization in a J-aggregate. The reorganization shift can be described by three parameters: the monomer reorganization energy, the relaxation time of the optical gap, and the exciton delocalization length

  19. Tetrastyryl-BODIPY-based dendritic light harvester and estimation of energy transfer efficiency.

    PubMed

    Kostereli, Ziya; Ozdemir, Tugba; Buyukcakir, Onur; Akkaya, Engin U

    2012-07-20

    Versatile BODIPY dyes can be transformed into bright near-IR-emitting fluorophores by quadruple styryl substitutions. When clickable functionalities on the styryl moieties are inserted, an efficient synthesis of a light harvester is possible. In addition, clear spectral evidence is presented showing that, in dendritic light harvesters, calculations commonly based on quantum yield or emission lifetime changes of the donor are bound to yield large overestimations of energy transfer efficiency.

  20. Molecular mimicry of photosynthetic energy and electron transfer

    SciTech Connect

    Gust, D.; Moore, T.A.; Moore, A.L. )

    1993-04-01

    Proper application of reaction design considerations can yield artificial photosynthetic devices which credibility mimic the three natural photochemical processes. One approach is to use pigments and electron donors and acceptors related to those found in natural photosynthesis (and thus presumably optimal for that system), but to replace the protein with covalent bonds as an organizing precept. Molecular pentads described herein exemplify the success of this approach. At the heart of these molecules, are two covalently linked synthetic porphyrin moieties (P-P). One of these models for chlorophyll is attached to a carotenoid polyene (C), whereas the other is linked to a rigid diquinone (Q-Q). As discussed later in this paper, excitation of such a pentad is followed by photoinitiated electron transfer steps which ultimately give a C[sup [center dot]+]-P-P-Q-Q[sup [center dot]-] charge-separated state. Depending upon the structure of the pentad and the conditions, these states are formed with quantum yields of up to 0.83, have lifetimes approaching 0.5 ms, and store about one-half of the energy of the exciting singlet state. Related photosynthesis mimics display singlet-singlet energy transfer from carotenoid polyenes to porphyrins and among porphyrin chromophores, and rapid quenching of porphyrin triplet states by attached carotenoids. How have the structures of these and other successful artificial reaction centers evolved, and what will be the next steps in their development The authors will address these questions from the point of view of photoinitiated electron transfer, and then singlet and triplet energy transfer will briefly be considered. 37 refs., 4 figs.

  1. Energy Transfer Dynamics in an RC-LH1-PufX Tubular Photosynthetic Membrane

    PubMed Central

    Hsin, Jen; Strümpfer, Johan; Sener, Melih; Qian, Pu; Hunter, C. Neil; Schulten, Klaus

    2010-01-01

    Light absorption and the subsequent transfer of excitation energy are the first two steps of the photosynthetic process, carried out by protein-bound pigments, mainly bacteriochlorophylls (BChls), in photosynthetic bacteria. BChls are anchored in light-harvesting (LH) complexes, such as light-harvesting complex I (LH1), which directly associates with the reaction center (RC), forming the RC-LH1 core complex. In Rhodobacter sphaeroides, RC-LH1 core complexes contain an additional protein, PufX, and assemble into dimeric RC-LH1-PufX core complexes. In the absence of light-harvesting complexes II, the former complexes can aggregate into a helically ordered tubular photosynthetic membrane. We examined the excitation transfer dynamics in a single RC-LH1-PufX core complex dimer using the hierarchical equations of motion for dissipative quantum dynamics that accurately, yet computationally costly, treat the coupling between BChls and their protein environment. A widely employed description, generalized Förster theory, was also used to calculate the transfer rates of the same excitonic system in order to verify the accuracy of this computationally cheap method. Additionally, in light of the structural uncertainties in the Rhodobacter sphaeroides RC-LH1-PufX core complex, geometrical alterations were introduced in the BChl organization. It is shown that the energy transfer dynamics is not affected by the considered changes in the BChl organization, and that generalized Förster theory provides accurate transfer rates. An all-atom model for a tubular photosynthetic membrane is then constructed on the basis of electron microscopy data, and the overall energy transfer properties of this membrane are computed. PMID:21152381

  2. Energy Transfer Sensitization of Luminescent Gold Nanoclusters: More than Just the Classical Förster Mechanism

    PubMed Central

    Oh, Eunkeu; Huston, Alan L.; Shabaev, Andrew; Efros, Alexander; Currie, Marc; Susumu, Kimihiro; Bussmann, Konrad; Goswami, Ramasis; Fatemi, Fredrik K.; Medintz, Igor L.

    2016-01-01

    Luminescent gold nanocrystals (AuNCs) are a recently-developed material with potential optic, electronic and biological applications. They also demonstrate energy transfer (ET) acceptor/sensitization properties which have been ascribed to Förster resonance energy transfer (FRET) and, to a lesser extent, nanosurface energy transfer (NSET). Here, we investigate AuNC acceptor interactions with three structurally/functionally-distinct donor classes including organic dyes, metal chelates and semiconductor quantum dots (QDs). Donor quenching was observed for every donor-acceptor pair although AuNC sensitization was only observed from metal-chelates and QDs. FRET theory dramatically underestimated the observed energy transfer while NSET-based damping models provided better fits but could not reproduce the experimental data. We consider additional factors including AuNC magnetic dipoles, density of excited-states, dephasing time, and enhanced intersystem crossing that can also influence ET. Cumulatively, data suggests that AuNC sensitization is not by classical FRET or NSET and we provide a simplified distance-independent ET model to fit such experimental data. PMID:27774984

  3. Energy transfer processes in solar energy conversion. Progress report, January 1, 1988--December 31, 1988

    SciTech Connect

    Fayer, M.D.

    1988-12-31

    The program involves the investigation of excitation transport and electron transfer in complex systems. In the area of electron transfer, we have been studying electron back transfer following donor-acceptor photoinduced electron transfer. We are addressing this problem both theoretically and experimentally. In the area of excitation transport, we have been examining transport in solid solutions, liquid solutions, and in clustered excitation transport systems. Again, we are pursuing both experimental and theoretical approaches. The problem of electron back transfer between photogenerated ions is of central importance in both artificial and biological solar energy conversion. Once an electron has been transferred from an optically excited donor to an acceptor, back transfer competes with the ability of the radical ions to go on to do useful chemistry. We are studying the back transfer process using picosecond transient grating experiments in conjunction with time resolved and steady state fluorescence quenching measurements. The transient grating experiments makes the back transfer process a direct experimental observable, while the fluorescence experiments allow the forward transfer to be examined. By combining the experiments, a complete picture emerges. 10 refs.

  4. Firefly Luciferase-Based Sequential Bioluminescence Resonance Energy Transfer (BRET)-Fluorescence Resonance Energy Transfer (FRET) Protease Assays.

    PubMed

    Branchini, Bruce

    2016-01-01

    We describe here the preparation of ratiometric luminescent probes that contain two well-separated emission peaks produced by a sequential bioluminescence resonance energy transfer (BRET)-fluorescence resonance energy transfer (FRET) process. The probes are single soluble fusion proteins consisting of a thermostable firefly luciferase variant that catalyzes yellow-green (560 nm maximum) bioluminescence and a red fluorescent protein covalently labeled with a near-Infrared fluorescent dye. The two proteins are connected by a decapeptide containing a protease recognition site specific for factor Xa, thrombin, or caspase 3. The rates of protease cleavage of the fusion protein substrates were monitored by recording emission spectra and plotting the change in peak ratios over time. Detection limits of 0.41 nM for caspase 3, 1.0 nM for thrombin, and 58 nM for factor Xa were realized with a scanning fluorometer. This method successfully employs an efficient sequential BRET-FRET energy transfer process based on firefly luciferase bioluminescence to assay physiologically important protease activities and should be generally applicable to the measurement of any endoprotease lacking accessible cysteine residues. PMID:27424898

  5. Firefly Luciferase-Based Sequential Bioluminescence Resonance Energy Transfer (BRET)-Fluorescence Resonance Energy Transfer (FRET) Protease Assays.

    PubMed

    Branchini, Bruce

    2016-01-01

    We describe here the preparation of ratiometric luminescent probes that contain two well-separated emission peaks produced by a sequential bioluminescence resonance energy transfer (BRET)-fluorescence resonance energy transfer (FRET) process. The probes are single soluble fusion proteins consisting of a thermostable firefly luciferase variant that catalyzes yellow-green (560 nm maximum) bioluminescence and a red fluorescent protein covalently labeled with a near-Infrared fluorescent dye. The two proteins are connected by a decapeptide containing a protease recognition site specific for factor Xa, thrombin, or caspase 3. The rates of protease cleavage of the fusion protein substrates were monitored by recording emission spectra and plotting the change in peak ratios over time. Detection limits of 0.41 nM for caspase 3, 1.0 nM for thrombin, and 58 nM for factor Xa were realized with a scanning fluorometer. This method successfully employs an efficient sequential BRET-FRET energy transfer process based on firefly luciferase bioluminescence to assay physiologically important protease activities and should be generally applicable to the measurement of any endoprotease lacking accessible cysteine residues.

  6. Excitation energy transfer in vitro between phycobiliproteins and thylakoid photosystem II of higher plants

    NASA Astrophysics Data System (ADS)

    Wu, Xiaonan; Tseng, C. K.

    1992-12-01

    The excitation energy transfer from phycobiliproteins to thylakoid PSII of higher plants was investigated. When incubated with spinach thylakoids, phycobiliproteins isolated from red and blue-green algae transferred light energy absorbed to spinach PSII. The efficiency of energy transfer was dependent on the kind of phycobiliproteins used. If spinach thylakoids were replaced by the thylakoids of Brassica chinensis, R-phycoerythin or C-phycocyanin did not transfer their excitation energy to PSII of Brassica chinensis unless allophycocyanin was present.

  7. Additive Fabrication of Conductive Patterns by a Template Transfer Process Based on Benzotriazole Adsorption As a Separation Layer.

    PubMed

    Chang, Yu; Yang, Zhen-Guo

    2016-06-01

    The traditional subtractive process to fabricate conductive patterns is environmentally harmful, wasteful, and limited in line width. The additive process, including direct printing of conductive paste or ink, direct printing of catalytic ink, laser-induced forward transfer, etc., can solve these problems. However, the current additive process also faces many difficulties such as low electrical and adhesion properties, low pattern thickness, high cost, etc. Benzotriazole (BTA), as widely used corrosion inhibitor, can be adsorbed onto a copper surface. The electroplated copper film on BTA-adsorbed copper foil shows poor adhesion. On the basis of this phenomenon, a novel template transfer process to additively fabricate conductive patterns has been developed. A permeant antiadhesive mask is printed on carrier copper foil, and then, BTA is adsorbed onto the exposed area of the carrier foil, thus forming the template. The template is electroplated to grow conductive patterns in the exposed parts, and then can be adhered to the flexible substrate. The substrate is peeled off, with the transfer of the conductive patterns to the substrate, to form the designed conductive patterns on PET. By reimmersing the template into BTA solution, the template can be used again. The mechanism of BTA adsorption and the reason for the low peeling strength are researched using Raman spectra, XPS and electrochemical impedance spectroscopy. Copper patterns more than 20 μm in thickness can be prepared on PET, the resistivity of the prepared copper patterns is 2.01 μΩ cm, which is about the same as bulk copper, and the peeling strength of the pattern on PET is measured to be 6.97 N/cm. This template transfer process, with no waste, low pollution, high electrical and adhesion properties, and low cost, shows high potential in the large scale manufacturing of electronic devices, such as RFID circuitry, FPCs, etc.

  8. Additive Fabrication of Conductive Patterns by a Template Transfer Process Based on Benzotriazole Adsorption As a Separation Layer.

    PubMed

    Chang, Yu; Yang, Zhen-Guo

    2016-06-01

    The traditional subtractive process to fabricate conductive patterns is environmentally harmful, wasteful, and limited in line width. The additive process, including direct printing of conductive paste or ink, direct printing of catalytic ink, laser-induced forward transfer, etc., can solve these problems. However, the current additive process also faces many difficulties such as low electrical and adhesion properties, low pattern thickness, high cost, etc. Benzotriazole (BTA), as widely used corrosion inhibitor, can be adsorbed onto a copper surface. The electroplated copper film on BTA-adsorbed copper foil shows poor adhesion. On the basis of this phenomenon, a novel template transfer process to additively fabricate conductive patterns has been developed. A permeant antiadhesive mask is printed on carrier copper foil, and then, BTA is adsorbed onto the exposed area of the carrier foil, thus forming the template. The template is electroplated to grow conductive patterns in the exposed parts, and then can be adhered to the flexible substrate. The substrate is peeled off, with the transfer of the conductive patterns to the substrate, to form the designed conductive patterns on PET. By reimmersing the template into BTA solution, the template can be used again. The mechanism of BTA adsorption and the reason for the low peeling strength are researched using Raman spectra, XPS and electrochemical impedance spectroscopy. Copper patterns more than 20 μm in thickness can be prepared on PET, the resistivity of the prepared copper patterns is 2.01 μΩ cm, which is about the same as bulk copper, and the peeling strength of the pattern on PET is measured to be 6.97 N/cm. This template transfer process, with no waste, low pollution, high electrical and adhesion properties, and low cost, shows high potential in the large scale manufacturing of electronic devices, such as RFID circuitry, FPCs, etc. PMID:27171553

  9. Gamma-ray transfer and energy deposition in supernovae

    NASA Technical Reports Server (NTRS)

    Swartz, Douglas A.; Sutherland, Peter G.; Harkness, Robert P.

    1995-01-01

    Solutions to the energy-independent (gray) radiative transfer equations are compared to results of Monte Carlo simulations of the Ni-56 and Co-56 decay gamma-ray energy deposition in supernovae. The comparison shows that an effective, purely absorptive, gray opacity, kappa(sub gamma) approximately (0. 06 +/- 0.01)Y(sub e) sq cm/g, where Y is the total number of electrons per baryon, accurately describes the interaction of gamma-rays with the cool supernova gas and the local gamma-ray energy deposition within the gas. The nature of the gamma-ray interaction process (dominated by Compton scattering in the relativistic regime) creates a weak dependence of kappa(sub gamma) on the optical thickness of the (spherically symmetric) supernova atmosphere: The maximum value of kappa(sub gamma) applies during optically thick conditions when individual gamma-rays undergo multiple scattering encounters and the lower bound is reached at the phase characterized by a total Thomson optical depth to the center of the atmosphere tau(sub e) approximately less than 1. Gamma-ray deposition for Type Ia supernova models to within 10% for the epoch from maximum light to t = 1200 days. Our results quantitatively confirm that the quick and efficient solution to the gray transfer problem provides an accurate representation of gamma-ray energy deposition for a broad range of supernova conditions.

  10. Intramolecular energy transfer and excitation coupling in metal-to-ligand charge transfer (MLCT) excited states

    NASA Astrophysics Data System (ADS)

    Riesen, Hans; Krausz, Elmars

    1995-02-01

    Several new spectroscopic studies relating to the coupling and dynamics in the spin-forbidden 3MLCT excited states of the chromophores [Ru(bpy)3]2+ and [Os(bpy)3]2+ (bpy equals 2,2'-bipyridine) in the racemic crystal lattices [Ru(bpy)3](PF6)2, [Ru(bpy)3](ClO4)2 and [Zn(bpy)3](ClO4)2 are presented. In the first of these lattices there are three closely related chromophoric sites at low temperatures, each with trigonal (C3) symmetry. In the two, isomorphic perchlorate salts there is a single chromophoric site, which has C2 symmetry. Using time resolved luminescence line narrowing, we have been able to directly measure the excitation transfer rate between two equivalent metal-ligand units in the [Ru(bpy)3]2+ chromophore doped in the [Zn(bpy)3](ClO4)2 lattice. The rate obtained (approximately equals 1 X 108 sec-1) is in excellent accord with estimates made from the observed linewidth in Stark swept transient hole-burning experiments made on the same system and confirm the single ligand, localized nature of the lowest emitting excited states and thus the very weak intramolecular coupling between metal ligand sub-units within this chromophore. The corresponding coupling in the [Os(bpy)3]2+ system is stronger and, in contrast to the ruthenium analogue, gives rise to additional features in the optical spectra in the origin region of the lowest 3MLCT excited states. The magnitude of the coupling can be probed and assessed by preparing modified chromophoric materials, in which one or two of the bpy ligands are perdeuterated (bpy-d8). This selective deuteration breaks the (near) degeneracy of excitations involving crystallographically equivalent ligands by approximately equals 30 - 40 cm-1 and this competes with or completely overrides the exciton coupling process. The exciton coupling is found to be approximately equals 2.4 cm-1 for [Os(bpy)3]2+ doped in [Ru(bpy)3](PF6)2 and can be understood within a mini-exciton description. Stronger couplings for the same chromophore in

  11. Optimal aeroassisted coplanar orbital transfer using an energy model

    NASA Astrophysics Data System (ADS)

    Halyo, Nesim; Taylor, Deborah B.

    1989-05-01

    The atmospheric portion of the trajectories for the aeroassisted coplanar orbit transfer was investigated. The equations of motion for the problem are expressed using reduced order model and total vehicle energy, kinetic plus potential, as the independent variable rather than time. The order reduction is achieved analytically without an approximation of the vehicle dynamics. In this model, the problem of coplanar orbit transfer is seen as one in which a given amount of energy must be transferred from the vehicle to the atmosphere during the trajectory without overheating the vehicle. An optimal control problem is posed where a linear combination of the integrated square of the heating rate and the vehicle drag is the cost function to be minimized. The necessary conditions for optimality are obtained. These result in a 4th order two-point-boundary-value problem. A parametric study of the optimal guidance trajectory in which the proportion of the heating rate term versus the drag varies is made. Simulations of the guidance trajectories are presented.

  12. Charge transfer and negative curvature energy in magnesium boride nanotubes

    NASA Astrophysics Data System (ADS)

    Tang, Hui; Ismail-Beigi, Sohrab

    2016-07-01

    Using first-principles calculations based on density functional theory, we study the energetics and charge transfer effects in MgBx nanotubes and two-dimensional (2D) sheets. The behavior of adsorbed Mg on 2D boron sheets is found to depend on the amount of electron transfer between the two subsystems. The amount is determined by both the density of adsorbed Mg as well as the atomic-scale structure of the boron subsystem. The degree of transfer can lead to repulsive or attractive Mg-Mg interactions. In both cases, model MgBx nanotubes built from 2D MgBx sheets can display negative curvature energy: a relatively unusual situation in nanosystems where the energy cost to curve the parent 2D sheet into a small-diameter nanotube is negative. Namely, the small-diameter nanotube is energetically preferred over the corresponding flat sheet. We also discuss how these findings may manifest themselves in experimentally synthesized MgBx nanotubes.

  13. Optimal aeroassisted coplanar orbital transfer using an energy model

    NASA Technical Reports Server (NTRS)

    Halyo, Nesim; Taylor, Deborah B.

    1989-01-01

    The atmospheric portion of the trajectories for the aeroassisted coplanar orbit transfer was investigated. The equations of motion for the problem are expressed using reduced order model and total vehicle energy, kinetic plus potential, as the independent variable rather than time. The order reduction is achieved analytically without an approximation of the vehicle dynamics. In this model, the problem of coplanar orbit transfer is seen as one in which a given amount of energy must be transferred from the vehicle to the atmosphere during the trajectory without overheating the vehicle. An optimal control problem is posed where a linear combination of the integrated square of the heating rate and the vehicle drag is the cost function to be minimized. The necessary conditions for optimality are obtained. These result in a 4th order two-point-boundary-value problem. A parametric study of the optimal guidance trajectory in which the proportion of the heating rate term versus the drag varies is made. Simulations of the guidance trajectories are presented.

  14. Fluorescence resonance energy transfer studies on anthrax lethal toxin.

    PubMed

    Croney, John C; Cunningham, Kristina M; Collier, R John; Jameson, David M

    2003-08-28

    Anthrax lethal toxin is a binary bacterial toxin consisting of two proteins, protective antigen (PA) and lethal factor (LF), that self-assemble on receptor-bearing eukaryotic cells to form toxic, non-covalent complexes. PA(63), a proteolytically activated form of PA, spontaneously oligomerizes to form ring-shaped heptamers that bind LF and translocate it into the cell. Site-directed mutagenesis was used to substitute cysteine for each of three residues (N209, E614 and E733) at various levels on the lateral face of the PA(63) heptamer and for one residue (E126) on LF(N), the 30 kDa N-terminal PA binding domain of LF. Cysteine residues in PA were labeled with IAEDANS and that in LF(N) was labeled with Alexa 488 maleimide. The mutagenesis and labeling did not significantly affect function. Time-resolved fluorescence methods were used to study fluorescence resonance energy transfer (FRET) between the AEDANS and Alexa 488 probes after the complex assembled in solution. The results clearly indicate energy transfer between AEDANS labeled at residue N209C on PA and the Alexa 488-labeled LF(N), whereas transfer from residue E614C on PA was slight, and none was observed from residue E733C. These results support a model in which LF(N) binds near the top of the ring-shaped (PA(63))(7) heptamer.

  15. Photoinduced Charge and Energy Transfer Processes in Molecular Aggregates

    SciTech Connect

    John F. Endicott

    2009-10-20

    This project involved the experimental probing of the electronic excited states generated by photoinduced (center-to-center) electron and energy transfer processes in several classes of transition metal donor/acceptor (D/A) complexes. Some of the general properties inferred from these studies should be useful in the design of new systems for energy conversion applications. Pursuit of the project goals has involved the determination of electron transfer efficiencies and the detailed study of variations in the electronic spectra of D/A complexes. This has resulted in the study of some very fundamental issues of photoinduced charge transfer and the identification of some of the constraints on its efficiency. The experimental studies of the competition between the degradative non-radiative unimolecular relaxation of transition metal excited states and their transfer of charge from these excited states to external acceptors have involved a range of techniques such as transient decay kinetics, photoacoustic calorimetry and transient or stationary state spectroscopy. The substrates synthesized for these studies were selected to provide model systems, or series of model systems to probe the validity of models of electronic excited states and their reactivity. The work during the last few years has focused largely, but not exclusively, on the use of emission spectral band shapes to probe the properties of charge transfer (CT) excited states. Bandshape variations are one of the very few approaches for systematically probing electronic excited states and good band shape resolution is necessary in order to gain information about the structural variations that correlate with excited state reactivity. Differences in molecular structure correlate with differences in chemical reactivity, and the variations in emission bandshapes are well known to relate to variations in the molecular structural differences between the excited and ground electronic states. However, it is has been

  16. Heat transfer in vertically aligned phase change energy storage systems

    SciTech Connect

    El-Dessouky, H.T.; Bouhamra, W.S.; Ettouney, H.M.; Akbar, M.

    1999-05-01

    Convection effects on heat transfer are analyzed in low temperature and vertically aligned phase change energy storage systems. This is performed by detailed temperature measurements in the phase change material (PCM) in eighteen locations forming a grid of six radial and three axial positions. The system constitutes a double pipe configuration, where commercial grade paraffin wax is stored in the annular space between the two pipes and water flows inside the inner pipe. Vertical alignment of the system allowed for reverse of the flow direction of the heat transfer fluid (HTF), which is water. Therefore, the PCM is heated from the bottom for HTF flow from bottom to top and from the top as the HTF flow direction is reversed. For the former case, natural convection affects the melting process. Collected data are used to study variations in the transient temperature distribution at axial and radial positions as well as for the two-dimensional temperature field. The data are used to calculate the PCM heat transfer coefficient and to develop correlations for the melting Fourier number. Results indicate that the PCM heat transfer coefficient is higher for the case of PCM heating from bottom to top. Nusselt number correlations are developed as a function of Rayleigh, Stefan, and Fourier numbers for the HTF flow from bottom to top and as a function of Stefan and Fourier numbers for HTF flow from top to bottom. The enhancement ratio for heat transfer caused by natural convection increases and then levels off as the inlet temperature of the HTF is increased.

  17. Interacting Electrons in Parabolic Quantum Dots:. Energy Levels, Addition Energies, and Charge Distributions

    NASA Astrophysics Data System (ADS)

    Schreiber, Michael; Siewert, Jens; Vojta, Thomas

    We investigate the properties of interacting electrons in a parabolic confinement. To this end we numerically diagonalize the Hamiltonian using the Hartree-Fock based diagonalization method which is related to the configuration interaction approach. We study different types of interactions, Coulomb as well as short range. In addition to the ground state energy we calculate the spatial charge distribution and compare the results to those of the classical calculation. We find that a sufficiently strong screened Coulomb interaction produces energy level bunching for classical as well as for quantum-mechanical dots. Bunching in the quantum-mechanical system occurs due to an interplay of kinetic and interaction energy, moreover, it is observed well before reaching the limit of a Wigner crystal. It also turns out that the shell structure of classical and quantum mechanical spatial charge distributions is quite similar.

  18. Interacting Electrons in Parabolic Quantum Dots:. Energy Levels, Addition Energies, and Charge Distributions

    NASA Astrophysics Data System (ADS)

    Schreiber, Michael; Siewert, Jens; Vojta, Thomas

    2001-08-01

    We investigate the properties of interacting electrons in a parabolic confinement. To this end we numerically diagonalize the Hamiltonian using the Hartree-Fock based diagonalization method which is related to the configuration interaction approach. We study different types of interactions, Coulomb as well as short range. In addition to the ground state energy we calculate the spatial charge distribution and compare the results to those of the classical calculation. We find that a sufficiently strong screened Coulomb interaction produces energy level bunching for classical as well as for quantum-mechanical dots. Bunching in the quantum-mechanical system occurs due to an interplay of kinetic and interaction energy, moreover, it is observed well before reaching the limit of a Wigner crystal. It also turns out that the shell structure of classical and quantum mechanical spatial charge distributions is quite similar.

  19. Energy transfer in mesoscopic vibrational systems enabled by eigenfrequency fluctuations

    NASA Astrophysics Data System (ADS)

    Atalaya, Juan

    Energy transfer between low-frequency vibrational modes can be achieved by means of nonlinear coupling if their eigenfrequencies fulfill certain nonlinear resonance conditions. Because of the discreteness of the vibrational spectrum at low frequencies, such conditions may be difficult to satisfy for most low-frequency modes in typical mesoscopic vibrational systems. Fluctuations of the vibrational eigenfrequencies can also be relatively strong in such systems. We show that energy transfer between modes can occur in the absence of nonlinear resonance if frequency fluctuations are allowed. The case of three modes with cubic nonlinear coupling and no damping is particularly interesting. It is found that the system has a non-thermal equilibrium state which depends only on the initial conditions. The rate at which the system approaches to such state is determined by the parameters such as the noise strength and correlation time, the nonlinearity strength and the detuning from exact nonlinear resonance. We also discuss the case of many weakly coupled modes. Our results shed light on the problem of energy relaxation of low-frequency vibrational modes into the continuum of high-frequency vibrational modes. The results have been obtained with Mark Dykman. Alternative email: jatalaya2012@gmail.com.

  20. Entanglement versus energy in the entanglement transfer problem

    SciTech Connect

    Cavalcanti, Daniel; Oliveira, J. G. Jr.; Santos, Marcelo Franca; Peixoto de Faria, J. G.; Terra Cunha, Marcelo O.

    2006-10-15

    We study the relation between energy and entanglement in an entanglement transfer problem. We first analyze the general setup of two entangled qubits ('a' and 'b') exchanging this entanglement with two other independent qubits ('A' and 'B'). Qubit 'a' ('b') interacts with qubit 'A' ('B') via a spin-exchange-like unitary evolution. A physical realization of this scenario could be the problem of two-level atoms transferring entanglement to resonant cavities via independent Jaynes-Cummings interactions. We study the dynamics of entanglement and energy for the second pair of qubits (tracing out the originally entangled ones) and show that these quantities are closely related. For example, the allowed quantum states occupy a restricted area in a phase diagram entanglement vs energy. Moreover, the curve which bounds this area is exactly the one followed if both interactions are equal and the entire four qubit system is isolated. We also consider the case when the target pair of qubits is subjected to losses and can spontaneously decay.

  1. A Wireless Magnetic Resonance Energy Transfer System for Micro Implantable Medical Sensors

    PubMed Central

    Li, Xiuhan; Zhang, Hanru; Peng, Fei; Li, Yang; Yang, Tianyang; Wang, Bo; Fang, Dongming

    2012-01-01

    Based on the magnetic resonance coupling principle, in this paper a wireless energy transfer system is designed and implemented for the power supply of micro-implantable medical sensors. The entire system is composed of the in vitro part, including the energy transmitting circuit and resonant transmitter coils, and in vivo part, including the micro resonant receiver coils and signal shaping chip which includes the rectifier module and LDO voltage regulator module. Transmitter and receiver coils are wound by Litz wire, and the diameter of the receiver coils is just 1.9 cm. The energy transfer efficiency of the four-coil system is greatly improved compared to the conventional two-coil system. When the distance between the transmitter coils and the receiver coils is 1.5 cm, the transfer efficiency is 85% at the frequency of 742 kHz. The power transfer efficiency can be optimized by adding magnetic enhanced resonators. The receiving voltage signal is converted to a stable output voltage of 3.3 V and a current of 10 mA at the distance of 2 cm. In addition, the output current varies with changes in the distance. The whole implanted part is packaged with PDMS of excellent biocompatibility and the volume of it is about 1 cm3. PMID:23112600

  2. Heat transfer research for ocean thermal energy conversion

    SciTech Connect

    Kreith, F.; Bharathan, D.

    1987-03-01

    In this lecture an overview of the heat- and mass-transfer phenomena of importance in ocean thermal energy conversion (OTEC) is presented with particular emphasis on open-cycle OTEC systems. Also included is a short historical review of OTEC developments in the past century and a comparison of open- and closed-cycle thermodynamics. Finally, results of system analyses, showing the effect of plant size on cost and the near-term potential of using OTEC for combined power production and desalination systems are briefly discussed.

  3. Heat transfer research for ocean thermal energy conversion

    SciTech Connect

    Kreith, F.; Bharathan, D.

    1988-02-01

    In this lecture an overview of the heat and mass-transfer phenomena of importance in ocean thermal energy conversion (OTEC) is presented with particular emphasis on open-cycle OTEC systems. Also included is a short historical review of OTEC developments in the past century and a comparison of open and closed-cycle thermodynamics. Finally, results of system analyses, showing the effect of plant size on cost and the near-term potential of using OTEC for combined power production and desalination systems, are briefly discussed.

  4. Rotational-translational energy transfer in rarefied nonequilibrium flows

    NASA Technical Reports Server (NTRS)

    Boyd, Iain D.

    1990-01-01

    A new model for simulating the transfer of energy between the translational and rotational modes is derived for a homogeneous gas of diatomic molecules. The model has been developed specifically for use in discrete particle simulation methods where molecular motion and intermolecular collisions are treated at the molecular level. A temperature dependence is introduced which has been predicted by theory and observed in experiment. The new model is applied to the relaxation of rotational temperature, and is found to produce significant differences in comparison with the model normally employed at both high and low temperatures. Calculations have also been performed for a Mach 7 normal shock wave.

  5. Monitoring integrin activation by fluorescence resonance energy transfer.

    PubMed

    Lefort, Craig T; Hyun, Young-Min; Kim, Minsoo

    2012-01-01

    Aberrant integrin activation is associated with several immune pathologies. In leukocyte adhesion deficiency (LAD), the absence or inability of β(2) integrins to undergo affinity upregulation contributes to recurrent infectious episodes and impaired wound healing, while excessive integrin activity leads to an exaggerated inflammatory response with associated tissue damage. Therefore, integrin activation is an attractive target for immunotherapies, and monitoring the effect of agents on integrin activation is necessary during preclinical drug development. The activation of integrins involves the structural rearrangement of both the extracellular and cytoplasmic domains. Here, we describe methods for monitoring integrin conformational activation using fluorescence resonance energy transfer (FRET).

  6. Baryon-Number Transfer in High-Energy hp Collisions

    SciTech Connect

    Bopp, F.; Shabelski, Yu. M.

    2005-12-01

    The processes of baryon-number transfer due to string-junction propagation in rapidity is considered. It has a significant effect on the net baryon production in pp collisions at mid-rapidities and an even larger effect in the forward hemisphere in the cases of {pi}p and {gamma}p interactions. The results of numerical calculations in the framework of the quark-gluon string model are in reasonable agreement with the data with the same parameter values for different energies.

  7. Sensitization of ultra-long-range excited-state electron transfer by energy transfer in a polymerized film

    PubMed Central

    Ito, Akitaka; Stewart, David J.; Fang, Zhen; Brennaman, M. Kyle; Meyer, Thomas J.

    2012-01-01

    Distance-dependent energy transfer occurs from the Metal-to-Ligand Charge Transfer (MLCT) excited state to an anthracene-acrylate derivative (Acr-An) incorporated into the polymer network of a semirigid poly(ethyleneglycol)dimethacrylate monolith. Following excitation, to Acr-An triplet energy transfer occurs followed by long-range, Acr-3An—Acr-An → Acr-An—Acr-3An, energy migration. With methyl viologen dication (MV2+) added as a trap, Acr-3An + MV2+ → Acr-An+ + MV+ electron transfer results in sensitized electron transfer quenching over a distance of approximately 90 Å. PMID:22949698

  8. Rotational Energy Transfer and Collisional Induced Raman Linewidths in N2 Gas. 1; Energy Transfer Rates

    NASA Technical Reports Server (NTRS)

    Huo, Winifred M.; Green, Sheldon; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    Rotationally inelastic transitions of N2 have been studied in the coupled state (CS) and infinite-order-sudden (IOS) approximations, using the N2-N2 rigidrotor potential of van der Avoird et al. For benchmarking purposes, close coupling (CC) calculations have also been carried out over a limited energy range. The CC and CS cross sections have been obtained both with and without identical molecule exchange symmetry, whereas exchange was neglected in the IOS calculations. The CS results track the CC cross sections rather well; between 113 - 219 cm(exp -1) the average deviation is 14%. Comparison between the CS and IOS cross sections at the high energy end of the CS calculation, 500 - 680 cm(exp -1), shows that IOS is sensitive to the amount of inelasticity and the results for large DELTA J transitions are subject to larger errors. It is found that the state-to-state cross sections with even and odd exchange symmetry agree to better than 2% and are well represented as a sum of direct and exchange cross sections for distinguishable molecules, an indication of the applicability of a classical treatment for this system. This result, however, does not apply to partial cross sections for given total J, but arises from a near cancellation in summing over partial waves. In order to use rigid-rotor results for the calculation of effective rotational excitation rates of N2 in the v=1 vibrational level colliding with bath N2 molecules in the v=0 level, it is assumed that exchange scattering between molecules in different vibrational levels is negligible and direct scattering is independent of Y. Good agreement with room temperature experimental data is obtained. The effective rates determined using the IOS and energy corrected sudden (ECS) approximations are also in reasonable agreement with experiment, with the ECS results being somewhat better. The problem with a degeneracy factor in earlier cross section expressions for collisions between identical molecules is pointed out

  9. An enzymatically-sensitized sequential and concentric energy transfer relay self-assembled around semiconductor quantum dots

    NASA Astrophysics Data System (ADS)

    Samanta, Anirban; Walper, Scott A.; Susumu, Kimihiro; Dwyer, Chris L.; Medintz, Igor L.

    2015-04-01

    The ability to control light energy within de novo nanoscale structures and devices will greatly benefit their continuing development and ultimate application. Ideally, this control should extend from generating the light itself to its spatial propagation within the device along with providing defined emission wavelength(s), all in a stand-alone modality. Here we design and characterize macromolecular nanoassemblies consisting of semiconductor quantum dots (QDs), several differentially dye-labeled peptides and the enzyme luciferase which cumulatively demonstrate many of these capabilities by engaging in multiple-sequential energy transfer steps. To create these structures, recombinantly-expressed luciferase and the dye-labeled peptides were appended with a terminal polyhistidine sequence allowing for controlled ratiometric self-assembly around the QDs via metal-affinity coordination. The QDs serve to provide multiple roles in these structures including as central assembly platforms or nanoscaffolds along with acting as a potent energy harvesting and transfer relay. The devices are activated by addition of coelenterazine H substrate which is oxidized by luciferase producing light energy which sensitizes the central 625 nm emitting QD acceptor by bioluminescence resonance energy transfer (BRET). The sensitized QD, in turn, acts as a relay and transfers the energy to a first peptide-labeled Alexa Fluor 647 acceptor dye displayed on its surface. This dye then transfers energy to a second red-shifted peptide-labeled dye acceptor on the QD surface through a second concentric Förster resonance energy transfer (FRET) process. Alexa Fluor 700 and Cy5.5 are both tested in the role of this terminal FRET acceptor. Photophysical analysis of spectral profiles from the resulting sequential BRET-FRET-FRET processes allow us to estimate the efficiency of each of the transfer steps. Importantly, the efficiency of each step within this energy transfer cascade can be controlled to

  10. Detection of Medium-Sized Polycyclic Aromatic Hydrocarbons via Fluorescence Energy Transfer

    PubMed Central

    Serio, Nicole; Prignano, Lindsey; Peters, Sean; Levine, Mindy

    2015-01-01

    Reported herein is the use of proximity-induced non-covalent energy transfer for the detection of medium-sized polycyclic aromatic hydrocarbons (PAHs). This energy transfer occurs within the cavity of γ-cyclodextrin in various aqueous environments, including human plasma and coconut water. Highly efficient energy transfer was observed, and the efficiency of the energy transfer is independent of the concentration of γ-cyclodextrin used, demonstrating the importance of hydrophobic binding in facilitating such energy transfer. Low limits of detection were also observed for many of the PAHs investigated, which is promising for the development of fluorescence-based detection schemes. PMID:25821390

  11. Effect of PTFE addition on the transfer film, wear and friction of PEEK-CuO composite

    SciTech Connect

    Vande Voort, J.; Bahadur, S.

    1995-12-31

    This work was done in part as a follow-up of an earlier study which had showed that CuO was effective in reducing the wear of PEEK, but the coefficient of friction of PEEK increased with the addition of CuO. In order to reduce the coefficient of friction, the organic filler PTFE was added to the CUO-PEEK composite so as to increase its appeal for practical applications. Initially, the optimum volume fraction of CuO in PEEK was determined for minimum wear by varying the proportion of the inorganic filler. With this composition as the basis for total filler content, PTFE was added to CuO-filled composites in 5 and 10 vol.% proportions. The friction and wear behaviors of these composites sliding against a tool steel surface were studied in a pin-on-disk configuration. It was determined from experiment that the optimum filler proportion of CuO in PEEK for minimum wear rate was 35 vol.%. The greater the content of CuO, the higher was the coefficient of friction. The optimum composition with PTFE and Cu additions was PEEK-30 vol.% CuO-5 vol.% PTFE. The wear rate and the coefficient of friction both of these compositions were lower than those of PEEK-35 vol.% CuO. The wear behavior has been analyzed by optical and scanning electron microscopy in terms of the ability of these composites to form transfer film on the steel counterface and the transfer film of PEEK-CuO-PTFE formulation has been investigated by XPS analysis. The XPS results revealed the presence of Cu ions and FeF{sub 2} compounds near the interface of the transfer film and the steel substrate. These observations have been used to support the hypothesis of reduced wear by the addition of inorganic and organic fillers to the polymer material.

  12. Protein Transfer Free Energy Obeys Entropy-Enthalpy Compensation.

    PubMed

    Mills, Eric A; Plotkin, Steven S

    2015-11-01

    We have found significant entropy-enthalpy compensation for the transfer of a diverse set of two-state folding proteins from water into water containing a diverse set of cosolutes, including osmolytes, denaturants, and crowders. In extracting thermodynamic parameters from experimental data, we show the potential importance of accounting for the cosolute concentration-dependence of the heat capacity change upon unfolding, as well as the potential importance of the temperature-dependence of the heat capacity change upon unfolding. We introduce a new Monte Carlo method to estimate the experimental uncertainty in the thermodynamic data and use this to show by bootstrapping methods that entropy-enthalpy compensation is statistically significant, in spite of large, correlated scatter in the data. We show that plotting the data at the transition midpoint provides the most accurate experimental values by avoiding extrapolation errors due to uncertainty in the heat capacity, and that this representation exhibits the strongest evidence of compensation. Entropy-enthalpy compensation is still significant at lab temperature however. We also find that compensation is still significant when considering variations due to heat capacity models, as well as typical measurement discrepancies lab-to-lab when such data is available. Extracting transfer entropy and enthalpy along with their uncertainties can provide a valuable consistency check between experimental data and simulation models, which may involve tests of simulated unfolded ensembles and/or models of the transfer free energy; we include specific applications to cold shock protein and protein L.

  13. Autologous Germline Mitochondrial Energy Transfer (AUGMENT) in Human Assisted Reproduction.

    PubMed

    Woods, Dori C; Tilly, Jonathan L

    2015-11-01

    Ovarian aging is characterized by a decline in both the total number and overall quality of oocytes, the latter of which has been experimentally tied to mitochondrial dysfunction. Clinical studies in the late 1990s demonstrated that transfer of cytoplasm aspirated from eggs of young female donors into eggs of infertile women at the time of intracytoplasmic sperm injection improved pregnancy success rates. However, donor mitochondria were identified in offspring, and the United States Food and Drug Administration raised questions about delivery of foreign genetic material into human eggs at the time of fertilization. Accordingly, heterologous cytoplasmic transfer, while promising, was in effect shut down as a clinical protocol. The recent discovery of adult oogonial (oocyte-generating) stem cells in mice, and subsequently in women, has since re-opened the prospects of delivering a rich source of pristine and patient-matched germline mitochondria to boost egg health and embryonic developmental potential without the need for young donor eggs to obtain cytoplasm. Herein we overview the science behind this new protocol, which has been patented and termed autologous germline mitochondrial energy transfer, and its use to date in clinical studies for improving pregnancy success in women with a prior history of assisted reproduction failure.

  14. Autologous Germline Mitochondrial Energy Transfer (AUGMENT) in Human Assisted Reproduction.

    PubMed

    Woods, Dori C; Tilly, Jonathan L

    2015-11-01

    Ovarian aging is characterized by a decline in both the total number and overall quality of oocytes, the latter of which has been experimentally tied to mitochondrial dysfunction. Clinical studies in the late 1990s demonstrated that transfer of cytoplasm aspirated from eggs of young female donors into eggs of infertile women at the time of intracytoplasmic sperm injection improved pregnancy success rates. However, donor mitochondria were identified in offspring, and the United States Food and Drug Administration raised questions about delivery of foreign genetic material into human eggs at the time of fertilization. Accordingly, heterologous cytoplasmic transfer, while promising, was in effect shut down as a clinical protocol. The recent discovery of adult oogonial (oocyte-generating) stem cells in mice, and subsequently in women, has since re-opened the prospects of delivering a rich source of pristine and patient-matched germline mitochondria to boost egg health and embryonic developmental potential without the need for young donor eggs to obtain cytoplasm. Herein we overview the science behind this new protocol, which has been patented and termed autologous germline mitochondrial energy transfer, and its use to date in clinical studies for improving pregnancy success in women with a prior history of assisted reproduction failure. PMID:26574741

  15. Technology transfer at the Department of Energy (DOE) National Laboratories

    SciTech Connect

    Harrer, B.J.; Good, M.S.; Lemon, D.K.; Morgen, G.P.

    1996-12-31

    Over the past 15 years, efforts to move technology generated from government-funded research and development activities at the Department of Energy (DOE) laboratories into commercial application by the private sector have faced an ever-changing environment. This environment has been primarily dictated by changes in the governing political philosophies of the Congress and the Administration that fund the laboratories and direct their activities. To review the role of the DOE laboratories, the following are discussed: the past, current, and potential future legislative and political environment impacting upon technology transfer from the laboratories; mechanisms of technology transfer; and three selected projects involving transfer of nondestructive evaluation technologies to the private sector. The technologies include computer-aided fabric evaluation (CAFE), measurement of the depth to which steel parts are hardened, and compensation for wear variations in the grinding wheel during the fabrication of wood shaper tools. These respectively deal with a large partnership of companies and institutes, a single but large manufacturing company, and a small business.

  16. Information systems and technology transfer programs on geothermal energy and other renewable sources of energy

    SciTech Connect

    Lippmann, M.J.; Antunez, E.

    1996-01-01

    In order to remain competitive, it is necessary to stay informed and use the most advanced technologies available. Recent developments in communication, like the Internet and the World Wide Web, enormously facilitate worldwide data and technology transfer. A compilation of the most important sources of data on renewable energies, especially geothermal, as well as lists of relevant technology transfer programs are presented. Information on how to gain access to, and learn more about them, is also given.

  17. Information systems and technology transfer programs on geothermal energy and other renewable sources of energy

    SciTech Connect

    Lippmann, Marcelo J.; Antunez, Emilio u.

    1996-01-24

    In order to remain competitive it is necessary to stay informed and use the most advanced technologies available. Recent developments in communication, like the Internet and the World Wide Web, enormously facilitate worldwide data and technology transfer. A compilation of the most important sources of data on renewable energies, especially geothermal, as well as lists of relevant technology transfer programs are presented. Information on how to gain access to, and learn more about them is also given.

  18. Iodinated (Perfluoro)alkyl Quinoxalines by Atom Transfer Radical Addition Using ortho-Diisocyanoarenes as Radical Acceptors.

    PubMed

    Leifert, Dirk; Studer, Armido

    2016-09-12

    A simple method for the preparation of functionalized quinoxalines is reported. Starting from readily accessible ortho-diisocyanoarenes and (perfluoro)alkyl iodides, the quinoxaline core is constructed during (perfluoro)alkylation by atom transfer radical addition (ATRA), resulting in 2-iodo-3-(perfluoro)alkylquinoxalines. The radical cascades are readily initiated either with visible light or by using α,α'-azobisisobutyronitrile (AIBN). The heteroarene products are obtained in high yields (up to 94 %), and the method can be readily scaled up. Useful follow-up chemistry documents the value of the novel radical quinoxaline synthesis.

  19. Iodinated (Perfluoro)alkyl Quinoxalines by Atom Transfer Radical Addition Using ortho-Diisocyanoarenes as Radical Acceptors.

    PubMed

    Leifert, Dirk; Studer, Armido

    2016-09-12

    A simple method for the preparation of functionalized quinoxalines is reported. Starting from readily accessible ortho-diisocyanoarenes and (perfluoro)alkyl iodides, the quinoxaline core is constructed during (perfluoro)alkylation by atom transfer radical addition (ATRA), resulting in 2-iodo-3-(perfluoro)alkylquinoxalines. The radical cascades are readily initiated either with visible light or by using α,α'-azobisisobutyronitrile (AIBN). The heteroarene products are obtained in high yields (up to 94 %), and the method can be readily scaled up. Useful follow-up chemistry documents the value of the novel radical quinoxaline synthesis. PMID:27510610

  20. Coherent vibrational energy transfer along a peptide helix

    NASA Astrophysics Data System (ADS)

    Kobus, Maja; Nguyen, Phuong H.; Stock, Gerhard

    2011-03-01

    To measure the transport of vibrational energy along a peptide helix, Hamm and co-workers [J. Phys. Chem. B 112, 9091 (2008)] performed time-resolved vibrational experiments, which showed that the energy transport rate increases by at least a factor of 4, when a localized C=O mode of the peptide instead of an attached chromophore is excited. This finding raises the question if coherent excitonic energy transfer between the C=O modes may be of importance for the overall energy transport in peptides. With this idea in mind, nonequilibrium molecular dynamics simulations as well as quantum-classical calculations are performed, which qualitatively reproduce the experimental findings. Moreover, the latter model (an exciton Hamiltonian whose matrix elements depend on the instantaneous positions of the peptide and solvent atoms) indeed exhibits the signatures of coherent quantum energy transport, at least within the first few picoseconds and at low temperatures. The origin of the observed decoherence, the absence of vibrational self-trapping, and the possibility of quantum interference between various transport paths are discussed in some detail.

  1. Collisional energy transfer from highly vibrationally excited triatomic molecules

    NASA Astrophysics Data System (ADS)

    Hynes, Robert G.; Sceats, Mark G.

    1989-12-01

    The atom-atom encounter model developed in the accompanying paper [M. G. Sceats, J. Chem. Phys. 91, 0000 (1989)] is applied to the collisional deactivation of highly vibrationally excited triatomic molecules CS2 and SO2 by the monatomic colliders He, Ne, Ar, Kr, and Xe at 300 K. The molecular inputs are a crude normal mode analysis, vibrational frequencies and effective anharmonicities, while the collisional inputs are parameters of the atom-atom potentials. The results for CS2 are compared with the simulations of Bruehl and Schatz and the experiments of Dove, Hippler, and Troe, while those for SO2 are compared with the simulations of Schranz and Troe and the experimental results of Heymann, Hippler, and Troe. Excellent agreement is found with experiment, and the superlinear energy dependence of the average energy transfer is attributed to anharmonicity of the triatomic molecule.

  2. Crossed-beam energy transfer in direct-drive implosions

    SciTech Connect

    Seka, W; Edgell, D H; Michel, D T; Froula, D H; Goncharov, V N; Craxton, R S; Divol, L; Epstein, R; Follett, R; Kelly, J H; Kosc, T Z; Maximov, A V; McCrory, R L; Meyerhofer, D D; Michel, P; Myatt, J F; Sangster, T C; Shvydky, A; Skupsky, S; Stoeckl, C

    2012-05-22

    Direct-drive-implosion experiments on the OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have showed discrepancies between simulations of the scattered (non-absorbed) light levels and measured ones that indicate the presence of a mechanism that reduces laser coupling efficiency by 10%-20%. This appears to be due to crossed-beam energy transfer (CBET) that involves electromagnetic-seeded, low-gain stimulated Brillouin scattering. CBET scatters energy from the central portion of the incoming light beam to outgoing light, reducing the laser absorption and hydrodynamic efficiency of implosions. One-dimensional hydrodynamic simulations including CBET show good agreement with all observables in implosion experiments on OMEGA. Three strategies to mitigate CBET and improve laser coupling are considered: the use of narrow beams, multicolor lasers, and higher-Z ablators. Experiments on OMEGA using narrow beams have demonstrated improvements in implosion performance.

  3. Estimating three-demensional energy transfer in isotropic turbulence

    NASA Technical Reports Server (NTRS)

    Li, K. S.; Helland, K. N.; Rosenblatt, M.

    1980-01-01

    To obtain an estimate of the spectral transfer function that indicates the rate of decay of energy, an x-wire probe was set at a fixed position, and two single wire probes were set at a number of locations in the same plane perpendicular to the mean flow in the wind tunnel. The locations of the single wire probes are determined by pseudo-random numbers (Monte Carlo). Second order spectra and cross spectra are estimated. The assumption of isotropy relative to second order spectra is examined. Third order spectra are also estimated corresponding to the positions specified. A Monte Carlo Fourier transformation of the downstream bispectra corresponding to integration across the plane perpendicular to the flow is carried out assuming isotropy. Further integration is carried out over spherical energy shells.

  4. Photoluminescence and energy transfer process in Gd2O3:Eu3+, Tb3+

    NASA Astrophysics Data System (ADS)

    Selvalakshmi, T.; Bose, A. Chandra

    2016-05-01

    Variation in photoluminescence (PL) properties of Eu3+ and Tb3+ as a function of co-dopant (Tb3+) concentration are studied for Gd2-x-yO3: Eu3+x Tb3+y (x = 0.02, y = 0.01, 0.03, 0.05). The crystal structure analysis is carried out by X-ray Diffraction (XRD). Absence of addition peaks corresponding europium or terbium phase confirms the phase purity. Diffuse reflectance spectroscopy (DRS) reveals the absorption peaks corresponding to host matrix, Eu3+ and Tb3+. The bandgap calculated from Kubelka - Munk function is also reported. PL spectra are recorded at the excitation wavelength of 307 nm and the emission peak corresponding to Eu3+ confirms the energy transfer from Tb3+ to Eu3+. The agglomeration of particles acts as quenching centres for energy transfer at higher concentrations.

  5. Efficient near-field energy transfer and relieved Casimir stiction between sub-wavelength gratings

    NASA Astrophysics Data System (ADS)

    Liu, Xianglei; Zhao, Bo; Zhang, Zhuomin

    2015-03-01

    The promising applications of near-field heat transfer in thermophotovoltaic devices, thermal imaging, thermal rectifiers, and local thermal management have motivated the search for nanostructures capable of supporting higher efficiency or greater heat flux than simple planar substances. In this work, efficient and delocalized radiative heat transfer between two aligned 1D sub-wavelength gratings is demonstrated based on the scattering theory using the rigorous coupled-wave analysis (RCWA). It is shown that the heat flux can be greatly enhanced and the accurate prediction may differ significantly from that of the geometry-based Derjaguin's proximity approximation (PA). The underlying mechanism is attributed to the excitation of hyperbolic modes that increase the energy transmission by supporting propagation of waves with large parallel wavevectors and. Besides efficient energy transport, the performance is robust, insensitive to the relative lateral shift. In addition, the Casimir stiction considering both quantum and thermal fluctuations is found to be relieved compared with bulks.

  6. Vibrational coherence and energy transfer in two-dimensional spectra with the optimized mean-trajectory approximation

    SciTech Connect

    Alemi, Mallory; Loring, Roger F.

    2015-06-07

    The optimized mean-trajectory (OMT) approximation is a semiclassical method for computing vibrational response functions from action-quantized classical trajectories connected by discrete transitions that represent radiation-matter interactions. Here, we extend the OMT to include additional vibrational coherence and energy transfer processes. This generalized approximation is applied to a pair of anharmonic chromophores coupled to a bath. The resulting 2D spectra are shown to reflect coherence transfer between normal modes.

  7. Vibrational coherence and energy transfer in two-dimensional spectra with the optimized mean-trajectory approximation

    PubMed Central

    Alemi, Mallory; Loring, Roger F.

    2015-01-01

    The optimized mean-trajectory (OMT) approximation is a semiclassical method for computing vibrational response functions from action-quantized classical trajectories connected by discrete transitions that represent radiation-matter interactions. Here, we extend the OMT to include additional vibrational coherence and energy transfer processes. This generalized approximation is applied to a pair of anharmonic chromophores coupled to a bath. The resulting 2D spectra are shown to reflect coherence transfer between normal modes. PMID:26049437

  8. Near-field effects and energy transfer in hybrid metal-oxide nanostructures

    PubMed Central

    Kuerbanjiang, Balati; Benel, Cahit; Papageorgiou, Giorgos; Goncalves, Manuel; Boneberg, Johannes; Leiderer, Paul; Ziemann, Paul; Marek, Peter; Hahn, Horst

    2013-01-01

    Summary One of the big challenges of the 21st century is the utilization of nanotechnology for energy technology. Nanoscale structures may provide novel functionality, which has been demonstrated most convincingly by successful applications such as dye-sensitized solar cells introduced by M. Grätzel. Applications in energy technology are based on the transfer and conversion of energy. Following the example of photosynthesis, this requires a combination of light harvesting, transfer of energy to a reaction center, and conversion to other forms of energy by charge separation and transfer. This may be achieved by utilizing hybrid nanostructures, which combine metallic and nonmetallic components. Metallic nanostructures can interact strongly with light. Plasmonic excitations of such structures can cause local enhancement of the electrical field, which has been utilized in spectroscopy for many years. On the other hand, the excited states in metallic structures decay over very short lifetimes. Longer lifetimes of excited states occur in nonmetallic nanostructures, which makes them attractive for further energy transfer before recombination or relaxation sets in. Therefore, the combination of metallic nanostructures with nonmetallic materials is of great interest. We report investigations of hybrid nanostructured model systems that consist of a combination of metallic nanoantennas (fabricated by nanosphere lithography, NSL) and oxide nanoparticles. The oxide particles were doped with rare-earth (RE) ions, which show a large shift between absorption and emission wavelengths, allowing us to investigate the energy-transfer processes in detail. The main focus is on TiO2 nanoparticles doped with Eu3+, since the material is interesting for applications such as the generation of hydrogen by photocatalytic splitting of water molecules. We use high-resolution techniques such as confocal fluorescence microscopy for the investigation of energy-transfer processes. The experiments

  9. Near-field effects and energy transfer in hybrid metal-oxide nanostructures.

    PubMed

    Herr, Ulrich; Kuerbanjiang, Balati; Benel, Cahit; Papageorgiou, Giorgos; Goncalves, Manuel; Boneberg, Johannes; Leiderer, Paul; Ziemann, Paul; Marek, Peter; Hahn, Horst

    2013-01-01

    One of the big challenges of the 21st century is the utilization of nanotechnology for energy technology. Nanoscale structures may provide novel functionality, which has been demonstrated most convincingly by successful applications such as dye-sensitized solar cells introduced by M. Grätzel. Applications in energy technology are based on the transfer and conversion of energy. Following the example of photosynthesis, this requires a combination of light harvesting, transfer of energy to a reaction center, and conversion to other forms of energy by charge separation and transfer. This may be achieved by utilizing hybrid nanostructures, which combine metallic and nonmetallic components. Metallic nanostructures can interact strongly with light. Plasmonic excitations of such structures can cause local enhancement of the electrical field, which has been utilized in spectroscopy for many years. On the other hand, the excited states in metallic structures decay over very short lifetimes. Longer lifetimes of excited states occur in nonmetallic nanostructures, which makes them attractive for further energy transfer before recombination or relaxation sets in. Therefore, the combination of metallic nanostructures with nonmetallic materials is of great interest. We report investigations of hybrid nanostructured model systems that consist of a combination of metallic nanoantennas (fabricated by nanosphere lithography, NSL) and oxide nanoparticles. The oxide particles were doped with rare-earth (RE) ions, which show a large shift between absorption and emission wavelengths, allowing us to investigate the energy-transfer processes in detail. The main focus is on TiO2 nanoparticles doped with Eu(3+), since the material is interesting for applications such as the generation of hydrogen by photocatalytic splitting of water molecules. We use high-resolution techniques such as confocal fluorescence microscopy for the investigation of energy-transfer processes. The experiments are

  10. Enhanced luminescence excitation via efficient optical energy transfer (Presentation Recording)

    NASA Astrophysics Data System (ADS)

    Aad, Roy; Nomenyo, Komla D.; Bercu, Bogdan; Couteau, Christophe; Sallet, Vincent; Rogers, David J.; Molinari, Michael; Lérondel, Gilles

    2015-10-01

    Luminescent nanoscale materials (LNMs) have received widespread interest in sensing and lighting applications due to their enhanced emissive properties. For sensing applications, LNMs offer improved sensitivity and fast response time which allow for lower limits of detection. Meanwhile, for lighting applications, LNMs, such as quantum dots, offer an improved internal quantum efficiency and controlled color rendering which allow for better lighting performances. Nevertheless, due to their nanometric dimensions, nanoscale materials suffer from extremely weak luminescence excitation (i.e. optical absorption) limiting their luminescence intensity, which in turn results in a downgrade in the limits of detection and external quantum efficiencies. Therefore, enhancing the luminescence excitation is a major issue for sensing and lighting applications. In this work, we report on a novel photonic approach to increase the luminescence excitation of nanoscale materials. Efficient luminescence excitation increase is achieved via a gain-assisted waveguided energy transfer (G-WET). The G-WET concept consists on placing nanoscale materials atop of a waveguiding active (i.e. luminescent) layer with optical gain. Efficient energy transfer is thus achieved by exciting the nanoscale material via the tail of the waveguided mode of the active layer emission. The G-WET concept is demonstrated on both a nanothin layer of fluorescent sensitive polymer and on CdSe/ZnS quantum dots coated on ZnO thin film, experimentally proving up to an 8-fold increase in the fluorescence of the polymer and a 3-fold increase in the luminescence of the CdSe/ZnS depending of the active layer emission regime (stimulated vs spontaneous emission). Furthermore, we will discuss on the extended G-WET concept which consists on coating nanoscale materials on a nanostructured active layer. The nanostructured active layer offers the necessary photonic modulation and a high specific surface which can presumably lead to

  11. Nonphotochemical Hole-Burning Studies of Energy Transfer Dynamics in Antenna Complexes of Photosynthetic Bacteria

    SciTech Connect

    Satoshi Matsuzaki

    2002-06-27

    This thesis contains the candidate's original work on excitonic structure and energy transfer dynamics of two bacterial antenna complexes as studied using spectral hole-burning spectroscopy. The general introduction is divided into two chapters (1 and 2). Chapter 1 provides background material on photosynthesis and bacterial antenna complexes with emphasis on the two bacterial antenna systems related to the thesis research. Chapter 2 reviews the underlying principles and mechanism of persistent nonphotochemical hole-burning (NPHB) spectroscopy. Relevant energy transfer theories are also discussed. Chapters 3 and 4 are papers by the candidate that have been published. Chapter 3 describes the application of NPHB spectroscopy to the Fenna-Matthews-Olson (FMO) complex from the green sulfur bacterium Prosthecochloris aestuarii; emphasis is on determination of the low energy vibrational structure that is important for understanding the energy transfer process associated within three lowest energy Q{sub y}-states of the complex. The results are compared with those obtained earlier on the FMO complex from Chlorobium tepidum. In Chapter 4, the energy transfer dynamics of the B800 molecules of intact LH2 and B800-deficient LH2 complexes of the purple bacterium Rhodopseudomonas acidophila are compared. New insights on the additional decay channel of the B800 ring of bacteriochlorophyll{sub a} (BChl{sub a}) molecules are provided. General conclusions are given in Chapter 5. A version of the hole spectrum simulation program written by the candidate for the FMO complex study (Chapter 3) is included as an appendix. The references for each chapter are given at the end of each chapter.

  12. Elementary Energy Transfer Pathways in Allochromatium vinosum Photosynthetic Membranes.

    PubMed

    Lüer, Larry; Carey, Anne-Marie; Henry, Sarah; Maiuri, Margherita; Hacking, Kirsty; Polli, Dario; Cerullo, Giulio; Cogdell, Richard J

    2015-11-01

    Allochromatium vinosum (formerly Chromatium vinosum) purple bacteria are known to adapt their light-harvesting strategy during growth according to environmental factors such as temperature and average light intensity. Under low light illumination or low ambient temperature conditions, most of the LH2 complexes in the photosynthetic membranes form a B820 exciton with reduced spectral overlap with LH1. To elucidate the reason for this light and temperature adaptation of the LH2 electronic structure, we performed broadband femtosecond transient absorption spectroscopy as a function of excitation wavelength in A. vinosum membranes. A target analysis of the acquired data yielded individual rate constants for all relevant elementary energy transfer (ET) processes. We found that the ET dynamics in high-light-grown membranes was well described by a homogeneous model, with forward and backward rate constants independent of the pump wavelength. Thus, the overall B800→B850→B890→ Reaction Center ET cascade is well described by simple triexponential kinetics. In the low-light-grown membranes, we found that the elementary backward transfer rate constant from B890 to B820 was strongly reduced compared with the corresponding constant from B890 to B850 in high-light-grown samples. The ET dynamics of low-light-grown membranes was strongly dependent on the pump wavelength, clearly showing that the excitation memory is not lost throughout the exciton lifetime. The observed pump energy dependence of the forward and backward ET rate constants suggests exciton diffusion via B850→ B850 transfer steps, making the overall ET dynamics nonexponential. Our results show that disorder plays a crucial role in our understanding of low-light adaptation in A. vinosum. PMID:26536265

  13. Elementary Energy Transfer Pathways in Allochromatium vinosum Photosynthetic Membranes.

    PubMed

    Lüer, Larry; Carey, Anne-Marie; Henry, Sarah; Maiuri, Margherita; Hacking, Kirsty; Polli, Dario; Cerullo, Giulio; Cogdell, Richard J

    2015-11-01

    Allochromatium vinosum (formerly Chromatium vinosum) purple bacteria are known to adapt their light-harvesting strategy during growth according to environmental factors such as temperature and average light intensity. Under low light illumination or low ambient temperature conditions, most of the LH2 complexes in the photosynthetic membranes form a B820 exciton with reduced spectral overlap with LH1. To elucidate the reason for this light and temperature adaptation of the LH2 electronic structure, we performed broadband femtosecond transient absorption spectroscopy as a function of excitation wavelength in A. vinosum membranes. A target analysis of the acquired data yielded individual rate constants for all relevant elementary energy transfer (ET) processes. We found that the ET dynamics in high-light-grown membranes was well described by a homogeneous model, with forward and backward rate constants independent of the pump wavelength. Thus, the overall B800→B850→B890→ Reaction Center ET cascade is well described by simple triexponential kinetics. In the low-light-grown membranes, we found that the elementary backward transfer rate constant from B890 to B820 was strongly reduced compared with the corresponding constant from B890 to B850 in high-light-grown samples. The ET dynamics of low-light-grown membranes was strongly dependent on the pump wavelength, clearly showing that the excitation memory is not lost throughout the exciton lifetime. The observed pump energy dependence of the forward and backward ET rate constants suggests exciton diffusion via B850→ B850 transfer steps, making the overall ET dynamics nonexponential. Our results show that disorder plays a crucial role in our understanding of low-light adaptation in A. vinosum.

  14. Resonance Energy Transfer-Based Approaches to Study GPCRs.

    PubMed

    Ayoub, Mohammed Akli

    2016-01-01

    Since their discovery, G protein-coupled receptors (GPCRs) constitute one of the most studied proteins leading to important discoveries and perspectives in terms of their biology and implication in physiology and pathophysiology. This is mostly linked to the remarkable advances in the development and application of the biophysical resonance energy transfer (RET)-based approaches, including bioluminescence and fluorescence resonance energy transfer (BRET and FRET, respectively). Indeed, BRET and FRET have been extensively applied to study different aspects of GPCR functioning such as their activation and regulation either statically or dynamically, in real-time and intact cells. Consequently, our view on GPCRs has considerably changed opening new challenges for the study of GPCRs in their native tissues in the aim to get more knowledge on how these receptors control the biological responses. Moreover, the technological aspect of this field of research promises further developments for robust and reliable new RET-based assays that may be compatible with high-throughput screening as well as drug discovery programs.

  15. Ultrafast Single and Multiexciton Energy Transfer in Semiconductor Nanoplatelets

    NASA Astrophysics Data System (ADS)

    Schaller, Richard

    Photophysical processes such as fluorescence resonance energy transfer (FRET) enable optical antennas, wavelength down-conversion in light-emitting diodes (LEDs), and optical bio-sensing schemes. The rate and efficiency of this donor to acceptor transfer of excitation between chromophores dictates the utility of FRET and can unlock new device operation motifs including quantum-funnel solar cells and reduced gain thresholds. However, the fastest reported FRET time constants involving spherical quantum dots (QDs) (0.12-1 ns), do not outpace biexciton Auger recombination (0.01-0.1 ns), which impedes multiexciton-driven applications including electrically-pumped lasers and carrier-multiplication-enhanced photovoltaics. Precisely controlled, few-monolayer thick semiconductor nano-platelets with tens-of-nanometer diameters exhibit intense optical transitions and hundreds-of-picosecond Auger recombination, but heretofore lack FRET characterizations. We examine binary CdSe NPL solids and show that inter-plate FRET (~6-23 ps, presumably for co-facial arrangements) can occur 15-50 times faster than Auger recombination and demonstrate multiexcitonic FRET, making such materials ideal candidates for advanced technologies. This work was performed at the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility under Contract No. DE-AC02-06CH11357.

  16. Calculation of resonance energy transfer in crowded biological membranes.

    PubMed

    Zimet, D B; Thevenin, B J; Verkman, A S; Shohet, S B; Abney, J R

    1995-04-01

    Analytical and numerical models were developed to describe fluorescence resonance energy transfer (RET) in crowded biological membranes. It was assumed that fluorescent donors were linked to membrane proteins and that acceptors were linked to membrane lipids. No restrictions were placed on the location of the donor within the protein or the partitioning of acceptors between the two leaflets of the bilayer; however, acceptors were excluded from the area occupied by proteins. Analytical equations were derived that give the average quantum yield of a donor at low protein concentrations. Monte Carlo simulations were used to generate protein and lipid distributions that were linked numerically with RET equations to determine the average quantum yield and the distribution of donor fluorescence lifetimes at high protein concentrations, up to 50% area fraction. The Monte Carlo results show such crowding always reduces the quantum yield, probably because crowding increases acceptor concentrations near donor-bearing proteins; the magnitude of the reduction increases monotonically with protein concentration. The Monte Carlo results also show that the distribution of fluorescence lifetimes can differ markedly, even for systems possessing the same average lifetime. The dependence of energy transfer on acceptor concentration, protein radius, donor position within the protein, and the fraction of acceptors in each leaflet was also examined. The model and results are directly applicable to the analysis of RET data obtained from biological membranes; their application should result in a more complete and accurate determination of the structures of membrane components. PMID:7787045

  17. Photoinduced energy transfer in transition metal complex oligomers

    SciTech Connect

    1997-06-01

    The work done over the past three years has been directed toward the preparation, characterization and photophysical examination of mono- and bimetallic diimine complexes. The work is part of a broader project directed toward the development of stable, efficient, light harvesting arrays of transition metal complex chromophores. One focus has been the synthesis of rigid bis-bidentate and bis-tridentate bridging ligands. The authors have managed to make the ligand bphb in multigram quantities from inexpensive starting materials. The synthetic approach used has allowed them to prepare a variety of other ligands which may have unique applications (vide infra). They have prepared, characterized and examined the photophysical behavior of Ru(II) and Re(I) complexes of the ligands. Energy donor/acceptor complexes of bphb have been prepared which exhibit nearly activationless energy transfer. Complexes of Ru(II) and Re(I) have also been prepared with other polyunsaturated ligands in which two different long lived (> 50 ns) excited states exist; results of luminescence and transient absorbance measurements suggest the two states are metal-to-ligand charge transfer and ligand localized {pi}{r_arrow}{pi}* triplets. Finally, the authors have developed methods to prepare polymetallic complexes which are covalently bound to various surfaces. The long term objective of this work is to make light harvesting arrays for the sensitization of large band gap semiconductors. Details of this work are provided in the body of the report.

  18. Photoinduced energy transfer in transition metal complex oligomers

    SciTech Connect

    1997-04-01

    The work we have done over the past three years has been directed toward the preparation, characterization and photophysical examination of mono- and bimetallic diimine complexes. The work is part of a broader project directed toward the development of stable, efficient, light harvesting arrays of transition metal complex chromophores. One focus has been the synthesis of rigid bis-bidentate and bis-tridentate bridging ligands. We have managed to make the ligand bphb in multigram quantities from inexpensive starting materials. The synthetic approach used has allowed us prepare a variety of other ligands which may have unique applications (vide infra). We have prepared, characterized and examined the photophysical behavior of Ru(II) and Re(I) complexes of the ligands. Energy donor/acceptor complexes of bphb have been prepared which exhibit nearly activationless energy transfer. Complexes of Ru(II) and Re(I) have also been prepared with other polyunsaturated ligands in which two different long lived ( > 50 ns) excited states exist; results of luminescence and transient absorbance measurements suggest the two states are metal-to-ligand charge transfer and ligand localized {pi}{r_arrow}{pi}* triplets. Finally, we have developed methods to prepare polymetallic complexes which are covalently bound to various surfaces. The long term objective of this work is to make light harvesting arrays for the sensitization of large band gap semiconductors. Details of this work are provided in the body of the report.

  19. Miniature fiber optic sensor based on fluorescence energy transfer

    NASA Astrophysics Data System (ADS)

    Meadows, David L.; Schultz, Jerome S.

    1992-04-01

    Optical fiber biosensors based on fluorescence assays have several distinct advantages when measuring biological analytes such as metabolites, cofactors, toxins, etc. Not only are optical signals immune to electronic interferences, but the polychromatic nature of most fluorochemical assays provides more potentially useful data about the system being studied. One of the most common difficulties normally encountered with optical biosensors is the inability to routinely recalibrate the optical and electronic components of the system throughout the life of the sensor. With this in mind, we present an optical fiber assay system for glucose based on a homogeneous singlet/singlet energy transfer assay along with the electronic instrumentation built to support the sensor system. In the sensor probe, glucose concentrations are indirectly measured from the level of fluorescence quenching caused by the homogeneous competition assay between TRITC labeled concanavalin A (receptor) and FITC labeled Dextran (ligand). The FITC signal is used to indicate glucose concentrations and the TRITC signal is used for internal calibration. Data is also presented on a protein derivatization procedure that was used to prevent aggregation of the receptor protein in solution. Also, a molecular model is described for the singlet/singlet energy transfer interactions that can occur in a model system composed of a monovalent ligand (FITC labeled papain) and a monovalent receptor (TRITC labeled concanavalin A).

  20. 76 FR 49764 - Steve Mason Enterprises, Inc., Green Energy Trans, LLC; Notice of Transfer of Exemption

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-11

    ... Energy Regulatory Commission Steve Mason Enterprises, Inc., Green Energy Trans, LLC; Notice of Transfer... transferred ownership of its exempted project property and facilities for Project No. 7742 to Green Energy.... \\4\\ E.g., John C. Jones, 99 FERC ] 61,372, at 62,580 n.2 (2002). 2. Green Energy Trans, LLC,...

  1. 78 FR 13661 - Energy Transfer Fuel, LP; Notice of Petition for Rate Approval

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-28

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Energy Transfer Fuel, LP; Notice of Petition for Rate Approval Take notice that on February 15, 2013, Energy Transfer Fuel, LP filed for approval of rates for...

  2. Structural and orientation effects on electronic energy transfer between silicon quantum dots with dopants and with silver adsorbates

    SciTech Connect

    Vinson, N.; Freitag, H.; Micha, D. A.

    2014-06-28

    Starting from the atomic structure of silicon quantum dots (QDs), and utilizing ab initio electronic structure calculations within the Förster resonance energy transfer (FRET) treatment, a model has been developed to characterize electronic excitation energy transfer between QDs. Electronic energy transfer rates, K{sub EET}, between selected identical pairs of crystalline silicon quantum dots systems, either bare, doped with Al or P, or adsorbed with Ag and Ag{sub 3}, have been calculated and analyzed to extend previous work on light absorption by QDs. The effects of their size and relative orientation on energy transfer rates for each system have also been considered. Using time-dependent density functional theory and the hybrid functional HSE06, the FRET treatment was employed to model electronic energy transfer rates within the dipole-dipole interaction approximation. Calculations with adsorbed Ag show that: (a) addition of Ag increases rates up to 100 times, (b) addition of Ag{sub 3} increases rates up to 1000 times, (c) collinear alignment of permanent dipoles increases transfer rates by an order of magnitude compared to parallel orientation, and (d) smaller QD-size increases transfer due to greater electronic orbitals overlap. Calculations with dopants show that: (a) p-type and n-type dopants enhance energy transfer up to two orders of magnitude, (b) surface-doping with P and center-doping with Al show the greatest rates, and (c) K{sub EET} is largest for collinear permanent dipoles when the dopant is on the outer surface and for parallel permanent dipoles when the dopant is inside the QD.

  3. Size-Independent Energy Transfer in Biomimetic Nanoring Complexes

    PubMed Central

    2016-01-01

    Supramolecular antenna-ring complexes are of great interest due to their presence in natural light-harvesting complexes. While such systems are known to provide benefits through robust and efficient energy funneling, the relationship between molecular structure, strain (governed by nuclear coordinates and motion), and energy dynamics (arising from electronic behavior) is highly complex. We present a synthetic antenna-nanoring system based on a series of conjugated porphyrin chromophores ideally suited to explore such effects. By systematically varying the size of the acceptor nanoring, we reveal the interplay between antenna-nanoring binding, local strain, and energy dynamics on the picosecond time scale. Binding of the antenna unit creates a local strain in the nanoring, and this strain was measured as a function of the size of the nanoring, by UV–vis-NIR titration, providing information on the conformational flexibility of the system. Strikingly, the energy-transfer rate is independent of nanoring size, indicating the existence of strain-localized acceptor states, spread over about six porphyrin units, arising from the noncovalent antenna-nanoring association. PMID:27176553

  4. Power Loss Analysis and Comparison of Segmented and Unsegmented Energy Coupling Coils for Wireless Energy Transfer

    PubMed Central

    Tang, Sai Chun; McDannold, Nathan J.

    2015-01-01

    This paper investigated the power losses of unsegmented and segmented energy coupling coils for wireless energy transfer. Four 30-cm energy coupling coils with different winding separations, conductor cross-sectional areas, and number of turns were developed. The four coils were tested in both unsegmented and segmented configurations. The winding conduction and intrawinding dielectric losses of the coils were evaluated individually based on a well-established lumped circuit model. We found that the intrawinding dielectric loss can be as much as seven times higher than the winding conduction loss at 6.78 MHz when the unsegmented coil is tightly wound. The dielectric loss of an unsegmented coil can be reduced by increasing the winding separation or reducing the number of turns, but the power transfer capability is reduced because of the reduced magnetomotive force. Coil segmentation using resonant capacitors has recently been proposed to significantly reduce the operating voltage of a coil to a safe level in wireless energy transfer for medical implants. Here, we found that it can naturally eliminate the dielectric loss. The coil segmentation method and the power loss analysis used in this paper could be applied to the transmitting, receiving, and resonant coils in two- and four-coil energy transfer systems. PMID:26640745

  5. Shining Light on Copper: Unique Opportunities for Visible-Light-Catalyzed Atom Transfer Radical Addition Reactions and Related Processes.

    PubMed

    Reiser, Oliver

    2016-09-20

    Visible-light photoredox catalysis offers exciting opportunities to achieve challenging carbon-carbon bond formations under mild and ecologically benign conditions. Desired features of photoredox catalysts are photostability, long excited-state lifetimes, strong absorption in the visible region, and high reduction or oxidation potentials to achieve electron transfer to substrates, thus generating radicals that can undergo synthetic organic transformations. These requirements are met in a convincing way by Ru(II)(phenanthroline)3- and Ir(III)(phenylpyridine)3-type complexes and, as a low-cost alternative, by organic dyes that offer a metal-free catalyst but suffer in general from lower photostability. Cu(I)(phenanthroline)2 complexes have been recognized for more than 30 years as photoresponsive compounds with highly negative Cu(I)* → Cu(II) oxidation potentials, but nevertheless, they have not been widely considered as suitable photoredox catalysts, mainly because their excited lifetimes are shorter by a factor of 5 to 10 compared with Ru(II) and Ir(III) complexes, their absorption in the visible region is weak, and their low Cu(II) → Cu(I) reduction potentials might impede the closure of a catalytic cycle for a given process. Contrasting again with Ru(II)L3 and Ir(III)L3 complexes, Cu(I)L2 assemblies undergo more rapid ligand exchange in solution, thus potentially reducing the concentration of the photoactive species. Focusing on atom transfer radical addition (ATRA) reactions and related processes, we highlight recent developments that show the utility of Cu(I)(phenanthroline)2 complexes as photoredox catalysts, demonstrating that despite their short excited-state lifetimes and weak absorption such complexes are efficient at low catalyst loadings. Moreover, some of the inherent disadvantages stated above can even be turned to advantages: (1) the low Cu(II) → Cu(I) reduction potential might efficiently promote reactions via a radical chain pathway, and (2

  6. Carotenoid to chlorophyll energy transfer in the peridinin–chlorophyll-a–protein complex involves an intramolecular charge transfer state

    PubMed Central

    Zigmantas, Donatas; Hiller, Roger G.; Sundström, Villy; Polívka, Tomáš

    2002-01-01

    Carotenoids are, along with chlorophylls, crucial pigments involved in light-harvesting processes in photosynthetic organisms. Details of carotenoid to chlorophyll energy transfer mechanisms and their dependence on structural variability of carotenoids are as yet poorly understood. Here, we employ femtosecond transient absorption spectroscopy to reveal energy transfer pathways in the peridinin–chlorophyll-a–protein (PCP) complex containing the highly substituted carotenoid peridinin, which includes an intramolecular charge transfer (ICT) state in its excited state manifold. Extending the transient absorption spectra toward near-infrared region (600–1800 nm) allowed us to separate contributions from different low-lying excited states of peridinin. The results demonstrate a special light-harvesting strategy in the PCP complex that uses the ICT state of peridinin to enhance energy transfer efficiency. PMID:12486228

  7. Modular organization of cardiac energy metabolism: energy conversion, transfer and feedback regulation

    PubMed Central

    Guzun, R.; Kaambre, T.; Bagur, R.; Grichine, A.; Usson, Y.; Varikmaa, M.; Anmann, T.; Tepp, K.; Timohhina, N.; Shevchuk, I.; Chekulayev, V.; Boucher, F.; Santos, P. Dos; Schlattner, U.; Wallimann, T.; Kuznetsov, A. V.; Dzeja, P.; Aliev, M.; Saks, V.

    2014-01-01

    To meet high cellular demands, the energy metabolism of cardiac muscles is organized by precise and coordinated functioning of intracellular energetic units (ICEUs). ICEUs represent structural and functional modules integrating multiple fluxes at sites of ATP generation in mitochondria and ATP utilization by myofibrillar, sarcoplasmic reticulum and sarcolemma ion-pump ATPases. The role of ICEUs is to enhance the efficiency of vectorial intracellular energy transfer and fine tuning of oxidative ATP synthesis maintaining stable metabolite levels to adjust to intracellular energy needs through the dynamic system of compartmentalized phosphoryl transfer networks. One of the key elements in regulation of energy flux distribution and feedback communication is the selective permeability of mitochondrial outer membrane (MOM) which represents a bottleneck in adenine nucleotide and other energy metabolite transfer and microcompartmentalization. Based on the experimental and theoretical (mathematical modelling) arguments, we describe regulation of mitochondrial ATP synthesis within ICEUs allowing heart workload to be linearly correlated with oxygen consumption ensuring conditions of metabolic stability, signal communication and synchronization. Particular attention was paid to the structure–function relationship in the development of ICEU, and the role of mitochondria interaction with cytoskeletal proteins, like tubulin, in the regulation of MOM permeability in response to energy metabolic signals providing regulation of mitochondrial respiration. Emphasis was given to the importance of creatine metabolism for the cardiac energy homoeostasis. PMID:24666671

  8. Modular organization of cardiac energy metabolism: energy conversion, transfer and feedback regulation.

    PubMed

    Guzun, R; Kaambre, T; Bagur, R; Grichine, A; Usson, Y; Varikmaa, M; Anmann, T; Tepp, K; Timohhina, N; Shevchuk, I; Chekulayev, V; Boucher, F; Dos Santos, P; Schlattner, U; Wallimann, T; Kuznetsov, A V; Dzeja, P; Aliev, M; Saks, V

    2015-01-01

    To meet high cellular demands, the energy metabolism of cardiac muscles is organized by precise and coordinated functioning of intracellular energetic units (ICEUs). ICEUs represent structural and functional modules integrating multiple fluxes at sites of ATP generation in mitochondria and ATP utilization by myofibrillar, sarcoplasmic reticulum and sarcolemma ion-pump ATPases. The role of ICEUs is to enhance the efficiency of vectorial intracellular energy transfer and fine tuning of oxidative ATP synthesis maintaining stable metabolite levels to adjust to intracellular energy needs through the dynamic system of compartmentalized phosphoryl transfer networks. One of the key elements in regulation of energy flux distribution and feedback communication is the selective permeability of mitochondrial outer membrane (MOM) which represents a bottleneck in adenine nucleotide and other energy metabolite transfer and microcompartmentalization. Based on the experimental and theoretical (mathematical modelling) arguments, we describe regulation of mitochondrial ATP synthesis within ICEUs allowing heart workload to be linearly correlated with oxygen consumption ensuring conditions of metabolic stability, signal communication and synchronization. Particular attention was paid to the structure-function relationship in the development of ICEU, and the role of mitochondria interaction with cytoskeletal proteins, like tubulin, in the regulation of MOM permeability in response to energy metabolic signals providing regulation of mitochondrial respiration. Emphasis was given to the importance of creatine metabolism for the cardiac energy homoeostasis.

  9. Electronic energy transfer: Localized operator partitioning of electronic energy in composite quantum systems

    NASA Astrophysics Data System (ADS)

    Khan, Yaser; Brumer, Paul

    2012-11-01

    A Hamiltonian based approach using spatially localized projection operators is introduced to give precise meaning to the chemically intuitive idea of the electronic energy on a quantum subsystem. This definition facilitates the study of electronic energy transfer in arbitrarily coupled quantum systems. In particular, the decomposition scheme can be applied to molecular components that are strongly interacting (with significant orbital overlap) as well as to isolated fragments. The result defines a consistent electronic energy at all internuclear distances, including the case of separated fragments, and reduces to the well-known Förster and Dexter results in their respective limits. Numerical calculations of coherent energy and charge transfer dynamics in simple model systems are presented and the effect of collisionally induced decoherence is examined.

  10. Conformational transitions in the calcium adenosinetriphosphatase studied by time-resolved fluorescence resonance energy transfer.

    PubMed

    Birmachu, W; Nisswandt, F L; Thomas, D D

    1989-05-01

    We have used time-resolved fluorescence to study proposed conformational transitions in the Ca-ATPase in skeletal sarcoplasmic reticulum (SR). Resonance energy transfer was used to measure distances between the binding sites of 5-[[2-[(iodoacetyl)amino]ethyl]amino]naphthalene-1-sulfonic acid (IAEDANS) and fluorescein 5-isothiocyanate (FITC) as a function of conditions proposed to affect the enzyme's conformation. When 1.0 +/- 0.15 IAEDANS is bound per Ca-ATPase, most (76 +/- 4%) of the probes have an excited-state lifetime (tau) of 18.6 +/- 0.5 ns, and the remainder have a lifetime of 2.5 +/- 0.9 ns. When FITC is bound to a specific site on each IAEDANS-labeled enzyme, most of the long-lifetime component is quenched into two short-lifetime components, indicating energy transfer that corresponds to two donor-acceptor distances. About one-third of the quenched population has a lifetime tau = 11.1 +/- 2.5 ns, corresponding to a transfer efficiency E = 0.40 +/- 0.07 and a donor-acceptor distance R1 = 52 +/- 3 A. The remaining two-thirds exhibit lifetimes in the range of 1.2-4.2 ns, corresponding to a second distance 31 A less than or equal to R2 less than or equal to 40 A. Addition of Ca2+ (in the micromolar to millimolar range), or vanadate (to produce a phosphoenzyme analogue), had no effect on the donor-acceptor distances. Addition of decavanadate results in the quenching of IAEDANS fluorescence but has no effect on the energy-transfer distance.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. Additions to compact heat exchanger technology: Jet impingement cooling & flow & heat transfer in metal foam-fins

    NASA Astrophysics Data System (ADS)

    Onstad, Andrew J.

    Compact heat exchangers have been designed following the same basic methodology for over fifty years. However, with the present emphasis on energy efficiency and light weight of prime movers there is increasing demand for completely new heat exchangers. Moreover, new materials and mesoscale fabrication technologies offer the possibility of significantly improving heat exchanger performance over conventional designs. This work involves fundamental flow and heat transfer experimentation to explore two new heat exchange systems: in Part I, large arrays of impinging jets with local extraction and in Part II, metal foams used as fins. Jet impingement cooling is widely used in applications ranging from paper manufacturing to the cooling of gas turbine blades because of the very high local heat transfer coefficients that are possible. While the use of single jet impingement results in non-uniform cooling, increased and more uniform mean heat transfer coefficients may be attained by dividing the total cooling flow among an array of smaller jets. Unfortunately, when the spent fluid from the array's central jets interact with the outer jets, the overall mean heat transfer coefficient is reduced. This problem can be alleviated by locally extracting the spent fluid before it is able to interact with the surrounding jets. An experimental investigation was carried out on a compact impingement array (Xn/Djet = 2.34) utilizing local extraction of the spent fluid (Aspent/Ajet = 2.23) from the jet exit plane. Spatially resolved measurements of the mean velocity field within the array were carried out at jet Reynolds numbers of 2300 and 5300 by magnetic resonance velocimetry, MRV. The geometry provided for a smooth transition from the jet to the target surface and out through the extraction holes without obvious flow recirculation. Mean Nusselt number measurements were also carried out for a Reynolds number range of 2000 to 10,000. The Nusselt number was found to increase with the

  12. Probing the conformation of the fibronectin III1-2 domain by fluorescence resonance energy transfer.

    PubMed

    Karuri, Nancy W; Lin, Zong; Rye, Hays S; Schwarzbauer, Jean E

    2009-02-01

    Fibronectin (FN) matrix is crucial for cell and tissue functions during embryonic development, wound healing, and oncogenesis. Assembly of FN matrix fibrils requires FN domains that mediate interactions with integrin receptors and with other FN molecules. In addition, regulation of FN matrix assembly depends on the first two FN type III modules, III(1) and III(2), which harbor FN-binding sites. We propose that interactions between these two modules sequester FN-binding sites in soluble FN and that these sites become exposed by FN conformational changes during assembly. To test the idea that III(1-2) has a compact conformation, we constructed CIIIY, a conformational sensor of III(1-2) based on fluorescent resonance energy transfer between cyan and yellow fluorescent proteins conjugated at its N and C termini. We demonstrate energy transfer in CIIIY and show that fluorescent resonance energy transfer was eliminated by proteolysis and by treatment with mild denaturants that disrupted intramolecular interactions between the two modules. We also show that mutations of key charged residues resulted in conformational changes that exposed binding sites for the N-terminal 70-kDa FN fragment. Collectively, these results support a conformation-dependent mechanism for the regulation of FN matrix assembly by III(1-2).

  13. Upconversion luminescence resonance energy transfer-based aptasensor for the sensitive detection of oxytetracycline.

    PubMed

    Zhang, Hui; Fang, Congcong; Wu, Shijia; Duan, Nuo; Wang, Zhouping

    2015-11-15

    In this work, a biosensor based on luminescence resonance energy transfer (LRET) from NaYF4:Yb,Tm upconversion nanoparticles (UCNPs) to SYBR Green I has been developed. The aptamers are covalently linked to UCNPs and hybridized with their complementary strands. The subsequent addition of SYBR Green allows SYBR Green I to insert into the formed double-stranded DNA (dsDNA) duplex and brings the energy donor and acceptor into close proximity, leading to the fluorescence of UCNPs transferred to SYBR Green I. When excited at 980 nm, the UCNPs emit luminescence at 477 nm, and this energy is transferred to SYBR Green I, which emits luminescence at 530 nm. In the presence of oxytetracycline (OTC), the aptamers prefer to bind to its corresponding analyte and dehybridize with the complementary DNA. This dehybridization leads to the liberation of SYBR Green I, which distances SYBR Green I from the UCNPs and recovers the UCNPs' luminescence. Under optimal conditions, a linear calibration is obtained between the ratio of I530 to I477 nm (I530/I477) and the OTC concentration, which ranges from 0.1 to 10 ng/ml with a limit of detection (LOD) of 0.054 ng/ml. PMID:26302361

  14. Upconversion luminescence resonance energy transfer-based aptasensor for the sensitive detection of oxytetracycline.

    PubMed

    Zhang, Hui; Fang, Congcong; Wu, Shijia; Duan, Nuo; Wang, Zhouping

    2015-11-15

    In this work, a biosensor based on luminescence resonance energy transfer (LRET) from NaYF4:Yb,Tm upconversion nanoparticles (UCNPs) to SYBR Green I has been developed. The aptamers are covalently linked to UCNPs and hybridized with their complementary strands. The subsequent addition of SYBR Green allows SYBR Green I to insert into the formed double-stranded DNA (dsDNA) duplex and brings the energy donor and acceptor into close proximity, leading to the fluorescence of UCNPs transferred to SYBR Green I. When excited at 980 nm, the UCNPs emit luminescence at 477 nm, and this energy is transferred to SYBR Green I, which emits luminescence at 530 nm. In the presence of oxytetracycline (OTC), the aptamers prefer to bind to its corresponding analyte and dehybridize with the complementary DNA. This dehybridization leads to the liberation of SYBR Green I, which distances SYBR Green I from the UCNPs and recovers the UCNPs' luminescence. Under optimal conditions, a linear calibration is obtained between the ratio of I530 to I477 nm (I530/I477) and the OTC concentration, which ranges from 0.1 to 10 ng/ml with a limit of detection (LOD) of 0.054 ng/ml.

  15. Calibration of fluorescence resonance energy transfer in microscopy

    DOEpatents

    Youvan, Dougalas C.; Silva, Christopher M.; Bylina, Edward J.; Coleman, William J.; Dilworth, Michael R.; Yang, Mary M.

    2003-12-09

    Imaging hardware, software, calibrants, and methods are provided to visualize and quantitate the amount of Fluorescence Resonance Energy Transfer (FRET) occurring between donor and acceptor molecules in epifluorescence microscopy. The MicroFRET system compensates for overlap among donor, acceptor, and FRET spectra using well characterized fluorescent beads as standards in conjunction with radiometrically calibrated image processing techniques. The MicroFRET system also provides precisely machined epifluorescence cubes to maintain proper image registration as the sample is illuminated at the donor and acceptor excitation wavelengths. Algorithms are described that pseudocolor the image to display pixels exhibiting radiometrically-corrected fluorescence emission from the donor (blue), the acceptor (green) and FRET (red). The method is demonstrated on samples exhibiting FRET between genetically engineered derivatives of the Green Fluorescent Protein (GFP) bound to the surface of Ni chelating beads by histidine-tags.

  16. Application of fluorescence resonance energy transfer in protein studies

    PubMed Central

    Ma, Linlin; Yang, Fan; Zheng, Jie

    2014-01-01

    Since the physical process of fluorescence resonance energy transfer (FRET) was elucidated more than six decades ago, this peculiar fluorescence phenomenon has turned into a powerful tool for biomedical research due to its compatibility in scale with biological molecules as well as rapid developments in novel fluorophores and optical detection techniques. A wide variety of FRET approaches have been devised, each with its own advantages and drawbacks. Especially in the last decade or so, we are witnessing a flourish of FRET applications in biological investigations, many of which exemplify clever experimental design and rigorous analysis. Here we review the current stage of FRET methods development with the main focus on its applications in protein studies in biological systems, by summarizing the basic components of FRET techniques, most established quantification methods, as well as potential pitfalls, illustrated by example applications. PMID:25368432

  17. Calibration of fluorescence resonance energy transfer in microscopy

    DOEpatents

    Youvan, Douglas C.; Silva, Christopher M.; Bylina, Edward J.; Coleman, William J.; Dilworth, Michael R.; Yang, Mary M.

    2002-09-24

    Imaging hardware, software, calibrants, and methods are provided to visualize and quantitate the amount of Fluorescence Resonance Energy Transfer (FRET) occurring between donor and acceptor molecules in epifluorescence microscopy. The MicroFRET system compensates for overlap among donor, acceptor, and FRET spectra using well characterized fluorescent beads as standards in conjunction with radiometrically calibrated image processing techniques. The MicroFRET system also provides precisely machined epifluorescence cubes to maintain proper image registration as the sample is illuminated at the donor and acceptor excitation wavelengths. Algorithms are described that pseudocolor the image to display pixels exhibiting radiometrically-corrected fluorescence emission from the donor (blue), the acceptor (green) and FRET (red). The method is demonstrated on samples exhibiting FRET between genetically engineered derivatives of the Green Fluorescent Protein (GFP) bound to the surface of Ni chelating beads by histidine-tags.

  18. Transfer of electronic energy from cyclohexane to benzene to tetramethylphenylenediamine

    SciTech Connect

    Johnston, D.B.; Lipsky, S. )

    1991-03-07

    The absorption of 160-nm light by cyclohexane in mixtures of cyclohexane, benzene, and tetraphenylmethylenediamine results in an emission spectrum consisting of the simultaneous fluorescence from all three components. A mechanism for the development of this spectrum and its dependence on benzene concentration is constructed and shown to be quantitatively consistent with the results of independent measurements on the separate components. In the absence of tetraphenylmethylenediamine, the quenching of cyclohexane fluorescence by benzene is found to be well represented by the standard diffusion model but with important contributions from transient terms. However, the concomitant sensitization of benzene fluorescence via energy transfer from cyclohexane is found to occur with an efficiency factor of only 0.26 {plus minus} 0.02 per encounter.

  19. Resonance energy transfer: The unified theory via vector spherical harmonics

    NASA Astrophysics Data System (ADS)

    Grinter, Roger; Jones, Garth A.

    2016-08-01

    In this work, we derive the well-established expression for the quantum amplitude associated with the resonance energy transfer (RET) process between a pair of molecules that are beyond wavefunction overlap. The novelty of this work is that the field of the mediating photon is described in terms of a spherical wave rather than a plane wave. The angular components of the field are constructed in terms of vector spherical harmonics while Hankel functions are used to define the radial component. This approach alleviates the problem of having to select physically correct solution from non-physical solutions, which seems to be inherent in plane wave derivations. The spherical coordinate system allows one to easily decompose the photon's fields into longitudinal and transverse components and offers a natural way to analyse near-, intermediate-, and far-zone RET within the context of the relative orientation of the transition dipole moments for the two molecules.

  20. Resonance energy transfer: The unified theory via vector spherical harmonics.

    PubMed

    Grinter, Roger; Jones, Garth A

    2016-08-21

    In this work, we derive the well-established expression for the quantum amplitude associated with the resonance energy transfer (RET) process between a pair of molecules that are beyond wavefunction overlap. The novelty of this work is that the field of the mediating photon is described in terms of a spherical wave rather than a plane wave. The angular components of the field are constructed in terms of vector spherical harmonics while Hankel functions are used to define the radial component. This approach alleviates the problem of having to select physically correct solution from non-physical solutions, which seems to be inherent in plane wave derivations. The spherical coordinate system allows one to easily decompose the photon's fields into longitudinal and transverse components and offers a natural way to analyse near-, intermediate-, and far-zone RET within the context of the relative orientation of the transition dipole moments for the two molecules. PMID:27544087

  1. Fluorescence energy transfer efficiency in labeled yeast cytochrome c: a rapid screen for ion biocompatibility in aqueous ionic liquids

    SciTech Connect

    Baker, Sheila N; Zhao, Hua; Pandey, Siddharth; Heller, William T; Bright, Frank; Baker, Gary A

    2011-01-01

    A fluorescence energy transfer de-quenching assay was implemented to follow the equilibrium unfolding behaviour of site-specific tetramethylrhodamine-labelled yeast cytochrome c in aqueous ionic liquid solutions; additionally, this approach offers the prospect of naked eye screening for biocompatible ion combinations in hydrated ionic liquids.

  2. Polymers suppress the inverse transfers of energy and the enstrophy flux fluctuations in two-dimensional turbulence.

    PubMed

    Kellay, H

    2004-09-01

    The addition of minute amounts of a flexible polymer to two-dimensional turbulence produced in fast-flowing soap films affects large scales and small scales differently. For large scales, the inverse transfers of energy are suppressed. For small scales, where mean quantities are barely affected, the enstrophy flux fluctuations are significantly reduced, making the flow less chaotic.

  3. Fluorescence resonance energy transfer-based stoichiometry in living cells.

    PubMed Central

    Hoppe, Adam; Christensen, Kenneth; Swanson, Joel A

    2002-01-01

    Imaging of fluorescence resonance energy transfer (FRET) between fluorescently labeled molecules can measure the timing and location of intermolecular interactions inside living cells. Present microscopic methods measure FRET in arbitrary units, and cannot discriminate FRET efficiency and the fractions of donor and acceptor in complex. Here we describe a stoichiometric method that uses three microscopic fluorescence images to measure FRET efficiency, the relative concentrations of donor and acceptor, and the fractions of donor and acceptor in complex in living cells. FRET stoichiometry derives from the concept that specific donor-acceptor complexes will give rise to a characteristic FRET efficiency, which, if measured, can allow stoichiometric discrimination of interacting components. A first equation determines FRET efficiency and the fraction of acceptor molecules in complex with donor. A second equation determines the fraction of donor molecules in complex by estimating the donor fluorescence lost due to energy transfer. This eliminates the need for acceptor photobleaching to determine total donor concentrations and allows for repeated measurements from the same cell. A third equation obtains the ratio of total acceptor to total donor molecules. The theory and method were confirmed by microscopic measurements of fluorescence from cyan fluorescent protein (CFP), citrine, and linked CFP-Citrine fusion protein, in solutions and inside cells. Together, the methods derived from these equations allow sensitive, rapid, and repeatable detection of donor-, acceptor-, and donor-acceptor complex stoichiometry at each pixel in an image. By accurately imaging molecular interactions, FRET stoichiometry opens new areas for quantitative study of intracellular molecular networks. PMID:12496132

  4. Quantum Process Tomography for Energy Transfer Systems via Ultrafast Spectroscopy

    NASA Astrophysics Data System (ADS)

    Yuen-Zhou, Joel

    2012-02-01

    The description of excited state dynamics in energy transfer systems constitutes a theoretical and experimental challenge in modern chemical physics. A spectroscopic protocol that systematically characterizes both coherent and dissipative processes of the probed chromophores is desired [1,2]. In this talk, I show that a set of two-color photon-echo experiments performs quantum state tomography (QST) of the one-exciton manifold of a dimer by reconstructing its density matrix in real time. This possibility in turn allows for a complete description of excited state dynamics via quantum process tomography (QPT). Simulations of a noisy QPT experiment for an inhomogeneously broadened ensemble of model excitonic dimers show that the protocol distills rich information about dissipative excitonic dynamics, which appears nontrivially hidden in the signal monitored in single realizations of four-wave mixing experiments Progress on the experimental side will be discussed, as well as new insights that QPT has offered on the understanding of 2D electronic and vibrational spectroscopy. [1] J. Yuen-Zhou, J. J. Krich, A. Aspuru-Guzik, Quantum state and process tomography of energy transfer systems via ultrafast spectroscopy Joel Yuen-Zhou, Jacob J. Krich, Masoud Mohseni and Al'an Aspuru-Guzik Proc. Nat. Acad. Sci. USA, Early Edition (2011). [2] J. Yuen-Zhou, A. Aspuru-Guzik, Quantum process tomography of molecular dimers from two-dimensional electronic spectroscopy I: General theory and application to homodimers Joel Yuen-Zhou and Al'an Aspuru-Guzik . Chem. Phys. 134, 134505 (2011).

  5. Adiabatic principles in atom-diatom collisional energy transfer

    SciTech Connect

    Hovingh, W.J.

    1993-01-01

    This work describes the application of numerical methods to the solution of the time dependent Schroedinger equation for non-reactive atom-diatom collisions in which only one of the degrees of freedom has been removed. The basic method involves expanding the wave function in a basis set in two of the diatomic coordinates in a body-fixed frame (with respect to the triatomic complex) and defining the coefficients in that expansion as functions on a grid in the collision coordinate. The wave function is then propagated in time using a split operator method. The bulk of this work is devoted to the application of this formalism to the study of internal rotational predissociation in NeHF, in which quasibound states of the triatom predissociate through the transfer of energy from rotation of the diatom into translational energy in the atom-diatom separation coordinate. The author analyzes the computed time dependent wave functions to calculate the lifetimes for several quasibound states; these are in agreement with time independent quantum calculations using the same potential. Moreover, the time dependent behavior of the wave functions themselves sheds light on the dynamics of the predissociation processes. Finally, the partial cross sections of the products in those processes is determined with multiple exit channels. These show strong selectivity in the orbital angular momentum of the outgoing fragments, which the author explains with an adiabatic channel interpretation of the wave function's dynamics. The author also suggests that the same formalism might profitably be used to investigate the quantum dynamics of [open quotes]quasiresonant vibration-rotation transfer[close quotes], in which remarkably strong propensity rules in certain inelastic atom-diatom collision arise from classical adiabatic invariance theory.

  6. On the use of Lineal Energy Measurements to Estimate Linear Energy Transfer Spectra

    NASA Technical Reports Server (NTRS)

    Adams, David A.; Howell, Leonard W., Jr.; Adam, James H., Jr.

    2007-01-01

    This paper examines the error resulting from using a lineal energy spectrum to represent a linear energy transfer spectrum for applications in the space radiation environment. Lineal energy and linear energy transfer spectra are compared in three diverse but typical space radiation environments. Different detector geometries are also studied to determine how they affect the error. LET spectra are typically used to compute dose equivalent for radiation hazard estimation and single event effect rates to estimate radiation effects on electronics. The errors in the estimations of dose equivalent and single event rates that result from substituting lineal energy spectra for linear energy spectra are examined. It is found that this substitution has little effect on dose equivalent estimates in interplanetary quiet-time environment regardless of detector shape. The substitution has more of an effect when the environment is dominated by solar energetic particles or trapped radiation, but even then the errors are minor especially if a spherical detector is used. For single event estimation, the effect of the substitution can be large if the threshold for the single event effect is near where the linear energy spectrum drops suddenly. It is judged that single event rate estimates made from lineal energy spectra are unreliable and the use of lineal energy spectra for single event rate estimation should be avoided.

  7. 48 CFR 204.470 - U.S.-International Atomic Energy Agency Additional Protocol.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false U.S.-International Atomic Energy Agency Additional Protocol. 204.470 Section 204.470 Federal Acquisition Regulations System DEFENSE... Information Within Industry 204.470 U.S.-International Atomic Energy Agency Additional Protocol....

  8. 48 CFR 204.470 - U.S.-International Atomic Energy Agency Additional Protocol.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false U.S.-International Atomic Energy Agency Additional Protocol. 204.470 Section 204.470 Federal Acquisition Regulations System DEFENSE... Information Within Industry 204.470 U.S.-International Atomic Energy Agency Additional Protocol....

  9. 48 CFR 204.470 - U.S.-International Atomic Energy Agency Additional Protocol.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false U.S.-International Atomic Energy Agency Additional Protocol. 204.470 Section 204.470 Federal Acquisition Regulations System DEFENSE... Information Within Industry 204.470 U.S.-International Atomic Energy Agency Additional Protocol....

  10. 48 CFR 204.470 - U.S.-International Atomic Energy Agency Additional Protocol.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false U.S.-International Atomic Energy Agency Additional Protocol. 204.470 Section 204.470 Federal Acquisition Regulations System DEFENSE... Information Within Industry 204.470 U.S.-International Atomic Energy Agency Additional Protocol....

  11. 48 CFR 204.470 - U.S.-International Atomic Energy Agency Additional Protocol.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false U.S.-International Atomic Energy Agency Additional Protocol. 204.470 Section 204.470 Federal Acquisition Regulations System DEFENSE... Information Within Industry 204.470 U.S.-International Atomic Energy Agency Additional Protocol....

  12. Energy Transfer Based Nanocomposite Scintillator for Radiation Detection

    NASA Astrophysics Data System (ADS)

    Aslam, Soha; Sahi, Sunil; Chen, Wei; Ma, Lun; Kenarangui, Rasool

    2014-09-01

    Scintillators are the materials that emit light upon irradiation with high energy radiation like X-ray or gamma-ray. Inorganic single crystal and organic (plastic and liquid) are the two most used scintillator types. Both of these scintillator kinds have advantages and disadvantages. Inorganic single crystals are expensive and difficult to grow in desire shape and size. Also, single crystal scintillator such as NaI and CsI are very hygroscopic. On the other hand, organic scintillators have low density which limits their applications in gamma spectroscopy. Due to high quantum yield and size dependent emission, nanoparticles have attracted interested in various field of research. Here, we have studies the nanoparticles for radiation detection. We have synthesized nanoparticles of Cerium fluoride (CeF3), Zinc Oxide (ZnO), Cadmium Telluride (CdTe), Copper complex and Zinc sulfide (ZnS). We have used Fluorescence Resonance Energy Transfer (FRET) principle to enhance the luminescence properties of nanocomposite scintillator. Nanocomposites scintillators are structurally characterized with X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). Optical properties are studied using Photoluminescence, UV-Visible and X-ray. Enhancements in the luminescence are observed under UV and X-ray excitation. Preliminary studies shows nanocomposite scintillators are promising for radiation detection. Scintillators are the materials that emit light upon irradiation with high energy radiation like X-ray or gamma-ray. Inorganic single crystal and organic (plastic and liquid) are the two most used scintillator types. Both of these scintillator kinds have advantages and disadvantages. Inorganic single crystals are expensive and difficult to grow in desire shape and size. Also, single crystal scintillator such as NaI and CsI are very hygroscopic. On the other hand, organic scintillators have low density which limits their applications in gamma spectroscopy. Due to high quantum

  13. Study on the performance of polycarboxylate-based superplasticizers synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization

    NASA Astrophysics Data System (ADS)

    Yu, Binbin; Zeng, Zhong; Ren, Qinyu; Chen, Yang; Liang, Mei; Zou, Huawei

    2016-09-01

    A series of block type polycarboxylate-based superplasticizers (PCs) with different molecular architectures were synthesized with macromonomer butenyl alkylene polyoxyethylene-polyoxypropylene ether (BAPP) and acrylic acid (AA) by reversible addition-fragmentation chain transfer (RAFT) polymerization. Fourier-Transformed Infrared (FTIR) Spectroscopy and dynamic light scattering (DLS) were applied to investigate the PCs' molecular structure. The dispersion capacity of the PCs in cement were also measured, and the results showed that the polycarboxylic dispersing agents prepared by this method were suitable for portlant cement. It was found that the PCs could affect the hydration process, which was performed through retarding the generation of ettringite in the hydrated product. Our studies with X-ray diffraction (XRD), scanning electron microscopy (SEM) and compressive strength measurement of hydrated production were all supporting this conclusion.

  14. Surface-imprinted magnetic particles for highly selective sulfonamides recognition prepared by reversible addition fragmentation chain transfer polymerization.

    PubMed

    Xie, Xiaoyu; Liu, Xia; Pan, Xiaoyan; Chen, Liang; Wang, Sicen

    2016-01-01

    In this work, novel magnetic molecularly imprinted polymers (MMIPs) were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization using sulfamerazine as the template. With the controlled/living property of RAFT polymerization, the resulting MMIPs showed high selectivity for sulfonamides recognition. The MMIPs were characterized by transmission electron microscopy, Fourier transform infrared, vibrating sample magnetometer, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The static and selectivity binding experiments demonstrated the desirable adsorption capacity and high selectivity of the MMIPs. The developed MMIPs were used as the solid-phase extraction sorbents to selectively extract four sulfonamides from aqueous solution. The recoveries of the spiked pond water ranged from 61.2 to 94.1% with RSD lower than 6.5%. This work demonstrated a versatile approach for the preparation of well-constructed MMIPs for application in the field of solid-phase extraction. PMID:26637219

  15. Simultaneous backward data transmission and power harvesting in an ultrasonic transcutaneous energy transfer link employing acoustically dependent electric impedance modulation.

    PubMed

    Ozeri, Shaul; Shmilovitz, Doron

    2014-09-01

    The advancement and miniaturization of body implanted medical devices pose several challenges to Ultrasonic Transcutaneous Energy Transfer (UTET), such as the need to reduce the size of the piezoelectric resonator, and the need to maximize the UTET link power-transfer efficiency. Accordingly, the same piezoelectric resonator that is used for energy harvesting at the body implant, may also be used for ultrasonic backward data transfer, for instance, through impedance modulation. This paper presents physical considerations and design guidelines of the body implanted transducer of a UTET link with impedance modulation for a backward data transfer. The acoustic matching design procedure was based on the 2×2 transfer matrix chain analysis, in addition to the Krimholtz Leedom and Matthaei KLM transmission line model. The UTET power transfer was carried out at a frequency of 765 kHz, continuous wave (CW) mode. The backward data transfer was attained by inserting a 9% load resistance variation around its matched value (550 Ohm), resulting in a 12% increase in the acoustic reflection coefficient. A backward data transmission rate of 1200 bits/s was experimentally demonstrated using amplitude shift keying, simultaneously with an acoustic power transfer of 20 mW to the implant. PMID:24861424

  16. Simultaneous backward data transmission and power harvesting in an ultrasonic transcutaneous energy transfer link employing acoustically dependent electric impedance modulation.

    PubMed

    Ozeri, Shaul; Shmilovitz, Doron

    2014-09-01

    The advancement and miniaturization of body implanted medical devices pose several challenges to Ultrasonic Transcutaneous Energy Transfer (UTET), such as the need to reduce the size of the piezoelectric resonator, and the need to maximize the UTET link power-transfer efficiency. Accordingly, the same piezoelectric resonator that is used for energy harvesting at the body implant, may also be used for ultrasonic backward data transfer, for instance, through impedance modulation. This paper presents physical considerations and design guidelines of the body implanted transducer of a UTET link with impedance modulation for a backward data transfer. The acoustic matching design procedure was based on the 2×2 transfer matrix chain analysis, in addition to the Krimholtz Leedom and Matthaei KLM transmission line model. The UTET power transfer was carried out at a frequency of 765 kHz, continuous wave (CW) mode. The backward data transfer was attained by inserting a 9% load resistance variation around its matched value (550 Ohm), resulting in a 12% increase in the acoustic reflection coefficient. A backward data transmission rate of 1200 bits/s was experimentally demonstrated using amplitude shift keying, simultaneously with an acoustic power transfer of 20 mW to the implant.

  17. Investigation of spectroscopy and the dual energy transfer mechanisms of Sm3+-doped telluroborate glasses

    NASA Astrophysics Data System (ADS)

    Van Do, Phan; Tuyen, Vu Phi; Quang, Vu Xuan; Hung, Le Xuan; Thanh, Luong Duy; Ngoc, Tran; Van Tam, Ngo; Huy, Bui The

    2016-05-01

    The absorption, luminescence, Raman spectra and lifetimes of Sm-doped alkali telluroborate glasses (TB glasses) TB:Sm3+ have been investigated. The dual energy transfers including energy transfer between Sm3+ - Sm3+ pairs and Sm3+ - non-bridging oxygen (NBO) intrinsic defects were investigated. The concentration quenching of luminescence intensity was explained by the non-radiative energy transfer between the Sm3+ ions through the cross-relaxation mechanism. The decay curves are single exponentials with low concentrations (lower 0.10 mol%) and become non-exponentials at higher concentrations. The non-exponential decay curves are fitted to the Inokuti and Hirayama model to give the energy transfer parameters between Sm3+ ions. The dominant interaction mechanism for energy transfer process is dipole-dipole interaction. The energy transfer induced Sm3+ photoluminescence enhancement in tellurite glass was experimentally studied and confirmed.

  18. Pathways for energy transfer in the core light-harvesting complexes CP43 and CP47 of photosystem II.

    PubMed

    de Weerd, Frank L; van Stokkum, Ivo H M; van Amerongen, Herbert; Dekker, Jan P; van Grondelle, Rienk

    2002-03-01

    The pigment-protein complexes CP43 and CP47 transfer excitation energy from the peripheral antenna of photosystem II toward the photochemical reaction center. We measured the excitation dynamics of the chlorophylls in isolated CP43 and CP47 complexes at 77 K by time-resolved absorbance-difference and fluorescence spectroscopy. The spectral relaxation appeared to occur with rates of 0.2-0.4 ps and 2-3 ps in both complexes, whereas an additional relaxation of 17 ps was observed only in CP47. Using the 3.8-A crystal structure of the photosystem II core complex from Synechococcus elongatus (A. Zouni, H.-T. Witt, J. Kern, P. Fromme, N. Krauss, W. Saenger, and P. Orth, 2001, Nature, 409:739-743), excitation energy transfer kinetics were calculated and a Monte Carlo simulation of the absorption spectra was performed. In both complexes, the rate of 0.2-0.4 ps can be ascribed to excitation energy transfer within a layer of chlorophylls near the stromal side of the membrane, and the slower 2-3-ps process to excitation energy transfer to the calculated lowest excitonic state. We conclude that excitation energy transfer within CP43 and CP47 is fast and does not contribute significantly to the well-known slow trapping of excitation energy in photosystem II.

  19. Monthly Variations of Low-Energy Ballistic Transfers to Lunar Halo Orbits

    NASA Technical Reports Server (NTRS)

    Parker, Jeffrey S.

    2010-01-01

    The characteristics of low-energy transfers between the Earth and Moon vary from one month to the next largely due to the Earth's and Moon's non-circular, non-coplanar orbits in the solar system. This paper characterizes those monthly variations as it explores the trade space of low-energy lunar transfers across many months. Mission designers may use knowledge of these variations to swiftly design desirable low-energy lunar transfers in any given month.

  20. Methods and kits for nucleic acid analysis using fluorescence resonance energy transfer

    DOEpatents

    Kwok, Pui-Yan; Chen, Xiangning

    1999-01-01

    A method for detecting the presence of a target nucleotide or sequence of nucleotides in a nucleic acid is disclosed. The method is comprised of forming an oligonucleotide labeled with two fluorophores on the nucleic acid target site. The doubly labeled oligonucleotide is formed by addition of a singly labeled dideoxynucleoside triphosphate to a singly labeled polynucleotide or by ligation of two singly labeled polynucleotides. Detection of fluorescence resonance energy transfer upon denaturation indicates the presence of the target. Kits are also provided. The method is particularly applicable to genotyping.

  1. Tunable luminescence and energy transfer of TbPO4:Eu3+ nanocrystals

    NASA Astrophysics Data System (ADS)

    Lü, Jiantao; Fan, Ting; Xie, Jianing; Chen, Guojie

    2013-01-01

    We report the synthesis of Tb(1-x)PO4:xEu3+ (x=0-1) nanophosphors directly by a simple hydrothermal method with citric acid (CA) as the organic additive and without further sintering treatment. The nanocrystals are well-faceted and show a highly symmetrical structure. The energy transfer between Tb3+ and Eu3+ in TbPO4 nanocrystal was investigated, and tunable emission wavelengths were realized in the materials by changing the doping concentration of Eu3+. The increase of Eu3+ concentration can lead to the interaction between neighboring Eu3+, which results in concentration quenching.

  2. Relaxation dynamics and exciton energy transfer in the low-temperature phase of MEH-PPV

    SciTech Connect

    Consani, Cristina; Koch, Federico; Panzer, Fabian; Unger, Thomas; Köhler, Anna; Brixner, Tobias

    2015-06-07

    Understanding the effects of aggregation on exciton relaxation and energy transfer is relevant to control photoinduced function in organic electronics and photovoltaics. Here, we explore the photoinduced dynamics in the low-temperature aggregated phase of a conjugated polymer by transient absorption and coherent electronic two-dimensional (2D) spectroscopy. Coherent 2D spectroscopy allows observing couplings among photoexcited states and discriminating band shifts from homogeneous broadening, additionally accessing the ultrafast dynamics at various excitation energies simultaneously with high spectral resolution. By combining the results of the two techniques, we differentiate between an initial exciton relaxation, which is not characterized by significant exciton mobility, and energy transport between different chromophores in the aggregate.

  3. Role of Tensorial Electronic Friction in Energy Transfer at Metal Surfaces.

    PubMed

    Askerka, Mikhail; Maurer, Reinhard J; Batista, Victor S; Tully, John C

    2016-05-27

    An accurate description of nonadiabatic energy relaxation is crucial for modeling atomistic dynamics at metal surfaces. Interfacial energy transfer due to electron-hole pair excitations coupled to motion of molecular adsorbates is often simulated by Langevin molecular dynamics with electronic friction. Here, we present calculations of the full electronic friction tensor by using first order time-dependent perturbation theory at the density functional theory level. We show that the friction tensor is generally anisotropic and nondiagonal, as found for hydrogen atom on Pd(100) and CO on Cu(100) surfaces. This implies that electron-hole pair induced nonadiabatic coupling at metal surfaces leads to friction-induced mode coupling, therefore, opening an additional channel for energy redistribution. We demonstrate the robustness and accuracy of our results by direct comparison to established methods and experimental data. PMID:27284673

  4. Role of Tensorial Electronic Friction in Energy Transfer at Metal Surfaces

    NASA Astrophysics Data System (ADS)

    Askerka, Mikhail; Maurer, Reinhard J.; Batista, Victor S.; Tully, John C.

    2016-05-01

    An accurate description of nonadiabatic energy relaxation is crucial for modeling atomistic dynamics at metal surfaces. Interfacial energy transfer due to electron-hole pair excitations coupled to motion of molecular adsorbates is often simulated by Langevin molecular dynamics with electronic friction. Here, we present calculations of the full electronic friction tensor by using first order time-dependent perturbation theory at the density functional theory level. We show that the friction tensor is generally anisotropic and nondiagonal, as found for hydrogen atom on Pd(100) and CO on Cu(100) surfaces. This implies that electron-hole pair induced nonadiabatic coupling at metal surfaces leads to friction-induced mode coupling, therefore, opening an additional channel for energy redistribution. We demonstrate the robustness and accuracy of our results by direct comparison to established methods and experimental data.

  5. Proton Linear Energy Transfer measurement using Emulsion Cloud Chamber

    NASA Astrophysics Data System (ADS)

    Shin, Jae-ik; Park, Seyjoon; Kim, Haksoo; Kim, Meyoung; Jeong, Chiyoung; Cho, Sungkoo; Lim, Young Kyung; Shin, Dongho; Lee, Se Byeong; Morishima, Kunihiro; Naganawa, Naotaka; Sato, Osamu; Kwak, Jungwon; Kim, Sung Hyun; Cho, Jung Sook; Ahn, Jung Keun; Kim, Ji Hyun; Yoon, Chun Sil; Incerti, Sebastien

    2015-04-01

    This study proposes to determine the correlation between the Volume Pulse Height (VPH) measured by nuclear emulsion and Linear Energy Transfer (LET) calculated by Monte Carlo simulation based on Geant4. The nuclear emulsion was irradiated at the National Cancer Center (NCC) with a therapeutic proton beam and was installed at 5.2 m distance from the beam nozzle structure with various thicknesses of water-equivalent material (PMMA) blocks to position with specific positions along the Bragg curve. After the beam exposure and development of the emulsion films, the films were scanned by S-UTS developed in Nagoya University. The proton tracks in the scanned films were reconstructed using the 'NETSCAN' method. Through this procedure, the VPH can be derived from each reconstructed proton track at each position along the Bragg curve. The VPH value indicates the magnitude of energy loss in proton track. By comparison with the simulation results obtained using Geant4, we found the correlation between the LET calculated by Monte Carlo simulation and the VPH measured by the nuclear emulsion.

  6. Organic Solar Cells: Understanding the Role of Förster Resonance Energy Transfer

    PubMed Central

    Feron, Krishna; Belcher, Warwick J.; Fell, Christopher J.; Dastoor, Paul C.

    2012-01-01

    Organic solar cells have the potential to become a low-cost sustainable energy source. Understanding the photoconversion mechanism is key to the design of efficient organic solar cells. In this review, we discuss the processes involved in the photo-electron conversion mechanism, which may be subdivided into exciton harvesting, exciton transport, exciton dissociation, charge transport and extraction stages. In particular, we focus on the role of energy transfer as described by Förster resonance energy transfer (FRET) theory in the photoconversion mechanism. FRET plays a major role in exciton transport, harvesting and dissociation. The spectral absorption range of organic solar cells may be extended using sensitizers that efficiently transfer absorbed energy to the photoactive materials. The limitations of Förster theory to accurately calculate energy transfer rates are discussed. Energy transfer is the first step of an efficient two-step exciton dissociation process and may also be used to preferentially transport excitons to the heterointerface, where efficient exciton dissociation may occur. However, FRET also competes with charge transfer at the heterointerface turning it in a potential loss mechanism. An energy cascade comprising both energy transfer and charge transfer may aid in separating charges and is briefly discussed. Considering the extent to which the photo-electron conversion efficiency is governed by energy transfer, optimisation of this process offers the prospect of improved organic photovoltaic performance and thus aids in realising the potential of organic solar cells. PMID:23235328

  7. Organic solar cells: understanding the role of Förster resonance energy transfer.

    PubMed

    Feron, Krishna; Belcher, Warwick J; Fell, Christopher J; Dastoor, Paul C

    2012-12-12

    Organic solar cells have the potential to become a low-cost sustainable energy source. Understanding the photoconversion mechanism is key to the design of efficient organic solar cells. In this review, we discuss the processes involved in the photo-electron conversion mechanism, which may be subdivided into exciton harvesting, exciton transport, exciton dissociation, charge transport and extraction stages. In particular, we focus on the role of energy transfer as described by F¨orster resonance energy transfer (FRET) theory in the photoconversion mechanism. FRET plays a major role in exciton transport, harvesting and dissociation. The spectral absorption range of organic solar cells may be extended using sensitizers that efficiently transfer absorbed energy to the photoactive materials. The limitations of F¨orster theory to accurately calculate energy transfer rates are discussed. Energy transfer is the first step of an efficient two-step exciton dissociation process and may also be used to preferentially transport excitons to the heterointerface, where efficient exciton dissociation may occur. However, FRET also competes with charge transfer at the heterointerface turning it in a potential loss mechanism. An energy cascade comprising both energy transfer and charge transfer may aid in separating charges and is briefly discussed. Considering the extent to which the photo-electron conversion efficiency is governed by energy transfer, optimisation of this process offers the prospect of improved organic photovoltaic performance and thus aids in realising the potential of organic solar cells.

  8. Conjugated-polymer-based energy-transfer systems for antimicrobial and anticancer applications.

    PubMed

    Yuan, Huanxiang; Wang, Bing; Lv, Fengting; Liu, Libing; Wang, Shu

    2014-10-29

    Conjugated polymers (CPs) attract a lot of attention in sensing, imaging, and biomedical applications because of recent achievements that are highlighted in this Research News article. A brief review of recent progress in the application of CP-based energy-transfer systems in antimicrobial and anticancer treatments is provided. The transfer of excitation energy from CPs to photosensitizers leads to the generation of reactive oxygen species (ROS) that are able to efficiently kill pathogenic microorganisms and cancer cells in the surroundings. Both fluorescence resonance energy transfer (FRET) and bioluminescence energy transfer (BRET) modes are discussed. PMID:24711269

  9. Local Measurement of Fuel Energy Deposition and Heat Transfer Environment During Fuel Lifetime Using Controlled Calorimetry

    SciTech Connect

    Don W. Miller; Andrew Kauffmann; Eric Kreidler; Dongxu Li; Hanying Liu; Daniel Mills; Thomas D. Radcliff; Joseph Talnagi

    2001-12-31

    A comprehensive description of the accomplishments of the DOE grant titled, ''Local Measurement of Fuel Energy Deposition and Heat Transfer Environment During Fuel Lifetime using Controlled Calorimetry''.

  10. Conducting Polymers: Insights Into Reduced Polyparaphenylene Vinylene Materials via Nucleophilic Addition, Proton Abstraction, and Electron Transfer Reactions.

    NASA Astrophysics Data System (ADS)

    Hilker, Brian Lee

    Grignard routes were investigated as methods to produce poly paraphenylene vinylene polymers. Because of coupling problems with these reactions, high molecular weight unsubstituted and dimethyl and dimethoxy substituted poly paraphenylene vinylene polymers were prepared via a literature-proven synthetic route: the sodium hydride dehydrochlorination addition polymerization route. Both the Grignard reactions and the sodium hydride method required dichloromethyl compounds monomers. The syntheses of these dichloromethyl monomers were studied extensively. The three high molecular weight poly paraphenylene vinylene polymer systems prepared in this work were charged with the traditional electron transfer reducing agent potassium/naphthalide. They were also charged via the novel nucleophilic addition of n-butyllithium across the alkenes and subjected to proton abstraction charging in the presence of a strong, complexed base mixture of n-butyllithium and potassium-t-butoxide. Conductivities were obtained via standard four point probe techniques. Characterization of these polymers and their quenched anion derivatives was via FTIR and acid titration. Results of these topics are presented and discussed.

  11. Non-Radiative Energy Transfer Mediated by Hybrid Light-Matter States.

    PubMed

    Zhong, Xiaolan; Chervy, Thibault; Wang, Shaojun; George, Jino; Thomas, Anoop; Hutchison, James A; Devaux, Eloise; Genet, Cyriaque; Ebbesen, Thomas W

    2016-05-17

    We present direct evidence of enhanced non-radiative energy transfer between two J-aggregated cyanine dyes strongly coupled to the vacuum field of a cavity. Excitation spectroscopy and femtosecond pump-probe measurements show that the energy transfer is highly efficient when both the donor and acceptor form light-matter hybrid states with the vacuum field. The rate of energy transfer is increased by a factor of seven under those conditions as compared to the normal situation outside the cavity, with a corresponding effect on the energy transfer efficiency. The delocalized hybrid states connect the donor and acceptor molecules and clearly play the role of a bridge to enhance the rate of energy transfer. This finding has fundamental implications for coherent energy transport and light-energy harvesting.

  12. Heat Transfer Analysis of Encapsulated Phase Change Materials for Thermal Energy Storage

    NASA Astrophysics Data System (ADS)

    Elmozughi, Ali F.

    process are investigated. The charging and discharging into and from the capsule wall is simulated for different boundary conditions and is applied with both laminar and turbulent flow conditions. Computational models are conducted by applying an enthalpy -- porosity method and volume of fluid method (VOF) to calculate the transport phenomena within the PCM capsule, including an internal air void. Energy storage and retrieval in different sized capsules is simulated. A cylindrical shaped EPCM capsule or tube is considered in simulations using both gas (air) and liquid (Therminol/VP-1) as the heat transfer fluid in a cross flow arrangement. The presence of the void has profound effects on the thermal response of the EPCM during both energy storage and retrieval process. Melting and solidification per unit mass of the PCM takes longer when the void is present. Additionally, due to material properties and the lack of convective effects, the solidification process is much slower than the melting process. One of the most significant outcomes of the present work is that the thermal energy module in the power generation systems has to be designed properly by careful consideration of the heat transfer from HTF to the EPCM as well as the heat transport inside the EPCM.

  13. The transfer between electron bulk kinetic energy and thermal energy in collisionless magnetic reconnection

    SciTech Connect

    Lu, San; Lu, Quanming; Huang, Can; Wang, Shui

    2013-06-15

    By performing two-dimensional particle-in-cell simulations, we investigate the transfer between electron bulk kinetic and electron thermal energy in collisionless magnetic reconnection. In the vicinity of the X line, the electron bulk kinetic energy density is much larger than the electron thermal energy density. The evolution of the electron bulk kinetic energy is mainly determined by the work done by the electric field force and electron pressure gradient force. The work done by the electron gradient pressure force in the vicinity of the X line is changed to the electron enthalpy flux. In the magnetic island, the electron enthalpy flux is transferred to the electron thermal energy due to the compressibility of the plasma in the magnetic island. The compression of the plasma in the magnetic island is the consequence of the electromagnetic force acting on the plasma as the magnetic field lines release their tension after being reconnected. Therefore, we can observe that in the magnetic island the electron thermal energy density is much larger than the electron bulk kinetic energy density.

  14. Interaction mechanism for energy transfer from Ce to Tb ions in silica

    NASA Astrophysics Data System (ADS)

    Seed Ahmed, H. A. A.; Chae, W. S.; Ntwaeaborwa, O. M.; Kroon, R. E.

    2016-01-01

    Energy transfer phenomena can play an important role in the development of luminescent materials. In this study, numerical simulations based on theoretical models of non-radiative energy transfer are compared to experimental results for Ce, Tb co-doped silica. Energy transfer from the donor (Ce) to the acceptor (Tb) resulted in a decrease in the Ce luminescence intensity and lifetime. The decrease in intensity corresponded best with the energy transfer models based on the exchange interaction and the dipole-dipole interaction. The critical transfer distance obtained from the fitting using both these models is around 2 nm. Since the exchange interaction requires a distance shorter than 1 nm to occur, the mechanism most likely to account for the energy transfer is concluded to be the dipole-dipole interaction. This is supported by an analysis of the lifetime data.

  15. Definition and determination of the triplet-triplet energy transfer reaction coordinate.

    PubMed

    Zapata, Felipe; Marazzi, Marco; Castaño, Obis; Acuña, A Ulises; Frutos, Luis Manuel

    2014-01-21

    A definition of the triplet-triplet energy transfer reaction coordinate within the very weak electronic coupling limit is proposed, and a novel theoretical formalism is developed for its quantitative determination in terms of internal coordinates The present formalism permits (i) the separation of donor and acceptor contributions to the reaction coordinate, (ii) the identification of the intrinsic role of donor and acceptor in the triplet energy transfer process, and (iii) the quantification of the effect of every internal coordinate on the transfer process. This formalism is general and can be applied to classical as well as to nonvertical triplet energy transfer processes. The utility of the novel formalism is demonstrated here by its application to the paradigm of nonvertical triplet-triplet energy transfer involving cis-stilbene as acceptor molecule. In this way the effect of each internal molecular coordinate in promoting the transfer rate, from triplet donors in the low and high-energy limit, could be analyzed in detail.

  16. Fluorophore(s) appended fullerene dyads and triads for probing photoinduced energy transfer: syntheses, electronic structure, and fluorescence studies.

    PubMed

    Deviprasad, Gollapalli R; Smith, Phillip M; Zandler, Melvin E; Rogers, Lisa M; D'Souza, Francis

    2006-01-01

    Fullerene, C(60) was functionalized to possess one or two fluorophore entities. The fluorophore-fullerene dyads thus synthesized contain either a naphthalene, pyrene, or fluorene entity while the triads contain either a pyrene or fluorene entity in addition to a naphthalene entity. The redox behavior of these dyads and triads were probed by cyclic voltammetric technique, while the geometry and electronic structures were deduced from ab initio B3LYP/3-21G(*) method. Steady-state emission studies revealed the occurrence of energy transfer from the singlet excited fluorophore to the fullerene entity in the case of the dyads while the occurrence of step-by-step sequential energy transfer is envisioned in the case of the triads. A better 'antenna-effect' owing to the extended range of excitation wavelength to induce energy transfer to the appended fullerene has been achieved in the case of the triads. PMID:16404521

  17. Shining Light on Copper: Unique Opportunities for Visible-Light-Catalyzed Atom Transfer Radical Addition Reactions and Related Processes.

    PubMed

    Reiser, Oliver

    2016-09-20

    Visible-light photoredox catalysis offers exciting opportunities to achieve challenging carbon-carbon bond formations under mild and ecologically benign conditions. Desired features of photoredox catalysts are photostability, long excited-state lifetimes, strong absorption in the visible region, and high reduction or oxidation potentials to achieve electron transfer to substrates, thus generating radicals that can undergo synthetic organic transformations. These requirements are met in a convincing way by Ru(II)(phenanthroline)3- and Ir(III)(phenylpyridine)3-type complexes and, as a low-cost alternative, by organic dyes that offer a metal-free catalyst but suffer in general from lower photostability. Cu(I)(phenanthroline)2 complexes have been recognized for more than 30 years as photoresponsive compounds with highly negative Cu(I)* → Cu(II) oxidation potentials, but nevertheless, they have not been widely considered as suitable photoredox catalysts, mainly because their excited lifetimes are shorter by a factor of 5 to 10 compared with Ru(II) and Ir(III) complexes, their absorption in the visible region is weak, and their low Cu(II) → Cu(I) reduction potentials might impede the closure of a catalytic cycle for a given process. Contrasting again with Ru(II)L3 and Ir(III)L3 complexes, Cu(I)L2 assemblies undergo more rapid ligand exchange in solution, thus potentially reducing the concentration of the photoactive species. Focusing on atom transfer radical addition (ATRA) reactions and related processes, we highlight recent developments that show the utility of Cu(I)(phenanthroline)2 complexes as photoredox catalysts, demonstrating that despite their short excited-state lifetimes and weak absorption such complexes are efficient at low catalyst loadings. Moreover, some of the inherent disadvantages stated above can even be turned to advantages: (1) the low Cu(II) → Cu(I) reduction potential might efficiently promote reactions via a radical chain pathway, and (2

  18. Rigorous calculation of electric field effects on the free energy change of the electron transfer reaction

    NASA Astrophysics Data System (ADS)

    Seki, Kazuhiko; Traytak, S. D.; Tachiya, M.

    2003-01-01

    We theoretically investigate the effect of an external electric field on the free energy change of electron transfer reaction in polar solvents. The external electric field produces polarization both on the solutes and in the solvent. Since the polarization produced on the solute differs from that in the solvent, apparent surface charge is created on the surface of the solutes. The polarization charge on the surface of the solutes interacts with the charge associated with the electron transfer. The free energy change of the reaction including such effect is calculated rigorously. A simple formula is derived and compared to the exact result in the case of spherical solutes in the dielectric continuum media. Only slight deviations are observed for any values of the solvent polarity and of the ratio between the radii of the donor and the acceptor molecules. In addition, we also applied the same method to evaluate the reorganization energy rigorously: The Marcus expression for the reorganization energy is an approximate one. The accuracy of the Marcus expression is assessed by comparing it with the exact result.

  19. Quantum calculations for rotational energy transfer in nitrogen molecule collisions

    NASA Astrophysics Data System (ADS)

    Huo, Winifred M.; Green, Sheldon

    1996-05-01

    Rotational energy transfer in collisions of nitrogen molecules has been studied theoretically, using the N2-N2 rigid-rotor potential of van der Avoird et al. [J. Chem. Phys. 84, 1629 (1986)]. For benchmarking purposes, converged close coupling (CC) calculations have been carried out to a total energy of about 200 cm-1. Coupled states (CS) approximation calculations have been carried out to a total energy of 680 cm-1, and infinite order sudden (IOS) approximation calculations have also been carried out. The CC and CS cross sections have been obtained both with and without identical molecule exchange symmetry, whereas exchange was neglected in the IOS calculations. The CS results track the CC cross sections rather well: between 113-219 cm-1 the average deviation is 14%, with accuracy improving at higher energy. Comparison between the CS and IOS cross sections at the high energy end of the CS calculations, 500-680 cm-1, shows that IOS is sensitive to the amount of inelasticity and the results for large ΔJ transitions are subject to larger errors. State-to-state cross sections with even and odd exchange symmetry agree to better than 2% and are well represented as a sum of direct and exchange cross sections for distinguishable molecules, an indication of the applicability of a classical treatment for this system. This result, however, does not apply to partial cross sections for given total J, but arises from a near cancellation of the interference terms between even and odd exchange symmetries on summing over partial waves. In order to compare with experimental data for rotational excitation rates of N2 in the n=1 excited vibrational level colliding with ground vibrational level (n=0) bath N2 molecules, it is assumed that exchange scattering between molecules in different vibrational levels is negligible and direct scattering is independent of n so that distinguishable molecule rigid rotor rates may be used. With these assumptions good agreement is obtained. Although

  20. Thermoregulated formation and disintegration of cationic block copolymer vesicles: fluorescence resonance energy transfer study.

    PubMed

    Maiti, Chiranjit; Dey, Debabrata; Mandal, Sarthak; Dhara, Dibakar

    2014-02-27

    Formation and disintegration of self-assembled nanostructures in response to external stimuli are important phenomena that have been widely explored for a variety of biomedical applications. In this contribution, we report the thermally triggered assembly of block copolymer molecules in aqueous solution to form vesicles (polymersomes) and their disassembly on reduction of temperature. A new thermoresponsive diblock copolymer of poly(N-isopropylacrylamide) poly((3-methacrylamidopropyl)trimethylammonium chloride) (PNIPA-b-PMAPTAC) was synthesized by reversible addition-fragmentation chain transfer technique. The solution properties and self-assembling behavior of the block copolymer molecules were studied by turbidimetry, temperature-dependent proton nuclear magnetic resonance, fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. Fluorescence resonance energy transfer studies between coumarin-153 (C-153, donor) and rhodamine 6G (R6G, acceptor) have been performed by steady-state and picosecond-resolved fluorescence spectroscopy to probe the structural and dynamic heterogeneity of the vesicles. The occurrence of efficient energy transfer was evident from the shortening of donor lifetime in the presence of the acceptor. The capability of the vesicles to encapsulate both hydrophobic and hydrophilic molecules and release them in response to decrease in temperature makes them potentially useful as drug delivery vehicles. PMID:24490812

  1. Peculiarities of collisional excitation transfer with excited screened energy levels of atoms

    SciTech Connect

    Gerasimov, V. A.; Gerasimov, V. V.; Pavlinskiy, A. V.

    2007-09-15

    We report an experimental discovery of deviations from the known regularities in collisional excitation transfer processes for metal atoms. The collisional excitation transfer with excited screened energy levels of thulium and dysprosium atoms is studied. The selecting role of the screening 6s shell in collisional excitation transfer is shown.

  2. Rapid and facile ratiometric detection of an anthrax biomarker by regulating energy transfer process in bio-metal-organic framework.

    PubMed

    Zhang, Yihe; Li, Bin; Ma, Heping; Zhang, Liming; Zheng, Youxuan

    2016-11-15

    A ratiometric fluorescent sensor based on luminescent bio-metal-organic framework was prepared by exchanging both Tb(3+) and Eu(3+) cations into anionic bio-MOF-1. Due to a highly efficient energy transfer from Tb(3+) to Eu(3+) (>89%), emission color of Tb/Eu@bio-MOF-1 was orange-red even though Tb(3+) was the dominant content in this Tb/Eu co-doping material. More interestingly, this energy transfer process could be modulated by dipicolinic acid (DPA), an unique biomarker for bacillus spores. With DPA addition, corresponding DPA-to-Tb(3+) energy transfer was gradually enhanced while the energy transfer from Tb(3+) to Eu(3+) was significantly weakened. By regulating the energy transfer process in Tb/Eu@bio-MOF-1, visual colorimetric sensing of DPA in porous MOF was realized for the first time. Detection limit of Tb/Eu@bio-MOF-1 for DPA was 34nM, which was much lower than an infectious dosage of Bacillus anthracis spores (60μM) for human being. Besides, Tb/Eu@bio-MOF-1 showed a remarkable selectivity over other aromatic ligands and amino acids. More importantly, this porous ratiometric sensor worked equally well in human serum. These particularly attractive features of Tb/Eu@bio-MOF-1 made the direct, rapid and naked-eye detection of DPA for practical application possible. PMID:27183278

  3. Rapid and facile ratiometric detection of an anthrax biomarker by regulating energy transfer process in bio-metal-organic framework.

    PubMed

    Zhang, Yihe; Li, Bin; Ma, Heping; Zhang, Liming; Zheng, Youxuan

    2016-11-15

    A ratiometric fluorescent sensor based on luminescent bio-metal-organic framework was prepared by exchanging both Tb(3+) and Eu(3+) cations into anionic bio-MOF-1. Due to a highly efficient energy transfer from Tb(3+) to Eu(3+) (>89%), emission color of Tb/Eu@bio-MOF-1 was orange-red even though Tb(3+) was the dominant content in this Tb/Eu co-doping material. More interestingly, this energy transfer process could be modulated by dipicolinic acid (DPA), an unique biomarker for bacillus spores. With DPA addition, corresponding DPA-to-Tb(3+) energy transfer was gradually enhanced while the energy transfer from Tb(3+) to Eu(3+) was significantly weakened. By regulating the energy transfer process in Tb/Eu@bio-MOF-1, visual colorimetric sensing of DPA in porous MOF was realized for the first time. Detection limit of Tb/Eu@bio-MOF-1 for DPA was 34nM, which was much lower than an infectious dosage of Bacillus anthracis spores (60μM) for human being. Besides, Tb/Eu@bio-MOF-1 showed a remarkable selectivity over other aromatic ligands and amino acids. More importantly, this porous ratiometric sensor worked equally well in human serum. These particularly attractive features of Tb/Eu@bio-MOF-1 made the direct, rapid and naked-eye detection of DPA for practical application possible.

  4. Immobilization of antimony in waste-to-energy bottom ash by addition of calcium and iron containing additives.

    PubMed

    Van Caneghem, Jo; Verbinnen, Bram; Cornelis, Geert; de Wijs, Joost; Mulder, Rob; Billen, Pieter; Vandecasteele, Carlo

    2016-08-01

    The leaching of Sb from waste-to-energy (WtE) bottom ash (BA) often exceeds the Dutch limit value of 0.32mgkg(-1) for recycling of BA in open construction applications. From the immobilization mechanisms described in the literature, it could be concluded that both Ca and Fe play an important role in the immobilization of Sb in WtE BA. Therefore, Ca and Fe containing compounds were added to the samples of the sand fraction of WtE BA, which in contrast to the granulate fraction is not recyclable to date, and the effect on the Sb leaching was studied by means of batch leaching tests. Results showed that addition of 0.5 and 2.5% CaO, 5% CaCl2, 2.5% Fe2(SO4)3 and 1% FeCl3 decreased the Sb leaching from 0.62±0.02mgkgDM(-1) to 0.20±0.02, 0.083±0.044, 0.25±0.01, 0.27±0.002 and 0.29±0.02mgkgDM(-1), respectively. Due to the increase in pH from 11.41 to 12.53 when 2.5% CaO was added, Pb and Zn leaching increased and exceeded the respective leaching limits. Addition of 5% CaCO3 had almost no effect on the Sb leaching, as evidenced by the resulting 0.53mgkgDM(-1) leaching concentration. This paper shows a complementary enhancement of the effect of Ca and Fe, by comparing the aforementioned Sb leaching results with those of WtE BA with combined addition of 2.5% CaO or 5% CaCl2 with 2.5% Fe2(SO4)3 or 1% FeCl3. These lab scale results suggest that formation of romeites with a high Ca content and formation of iron antimonate (tripuhyite) with a very low solubility are the main immobilization mechanisms of Sb in WtE BA. Besides the pure compounds and their mixtures, also addition of 10% of two Ca and Fe containing residues of the steel industry, hereafter referred to as R1 and R2, was effective in decreasing the Sb leaching from WtE BA below the Dutch limit value for reuse in open construction applications. To evaluate the long term effect of the additives, pilot plots of WtE BA with 10% of R1 and 5% and 10% of R2 were built and samples were submitted to leaching tests at

  5. Immobilization of antimony in waste-to-energy bottom ash by addition of calcium and iron containing additives.

    PubMed

    Van Caneghem, Jo; Verbinnen, Bram; Cornelis, Geert; de Wijs, Joost; Mulder, Rob; Billen, Pieter; Vandecasteele, Carlo

    2016-08-01

    The leaching of Sb from waste-to-energy (WtE) bottom ash (BA) often exceeds the Dutch limit value of 0.32mgkg(-1) for recycling of BA in open construction applications. From the immobilization mechanisms described in the literature, it could be concluded that both Ca and Fe play an important role in the immobilization of Sb in WtE BA. Therefore, Ca and Fe containing compounds were added to the samples of the sand fraction of WtE BA, which in contrast to the granulate fraction is not recyclable to date, and the effect on the Sb leaching was studied by means of batch leaching tests. Results showed that addition of 0.5 and 2.5% CaO, 5% CaCl2, 2.5% Fe2(SO4)3 and 1% FeCl3 decreased the Sb leaching from 0.62±0.02mgkgDM(-1) to 0.20±0.02, 0.083±0.044, 0.25±0.01, 0.27±0.002 and 0.29±0.02mgkgDM(-1), respectively. Due to the increase in pH from 11.41 to 12.53 when 2.5% CaO was added, Pb and Zn leaching increased and exceeded the respective leaching limits. Addition of 5% CaCO3 had almost no effect on the Sb leaching, as evidenced by the resulting 0.53mgkgDM(-1) leaching concentration. This paper shows a complementary enhancement of the effect of Ca and Fe, by comparing the aforementioned Sb leaching results with those of WtE BA with combined addition of 2.5% CaO or 5% CaCl2 with 2.5% Fe2(SO4)3 or 1% FeCl3. These lab scale results suggest that formation of romeites with a high Ca content and formation of iron antimonate (tripuhyite) with a very low solubility are the main immobilization mechanisms of Sb in WtE BA. Besides the pure compounds and their mixtures, also addition of 10% of two Ca and Fe containing residues of the steel industry, hereafter referred to as R1 and R2, was effective in decreasing the Sb leaching from WtE BA below the Dutch limit value for reuse in open construction applications. To evaluate the long term effect of the additives, pilot plots of WtE BA with 10% of R1 and 5% and 10% of R2 were built and samples were submitted to leaching tests at

  6. Low-energy plasma immersion ion implantation to induce DNA transfer into bacterial E. coli

    NASA Astrophysics Data System (ADS)

    Sangwijit, K.; Yu, L. D.; Sarapirom, S.; Pitakrattananukool, S.; Anuntalabhochai, S.

    2015-12-01

    Plasma immersion ion implantation (PIII) at low energy was for the first time applied as a novel biotechnology to induce DNA transfer into bacterial cells. Argon or nitrogen PIII at low bias voltages of 2.5, 5 and 10 kV and fluences ranging from 1 × 1012 to 1 × 1017 ions/cm2 treated cells of Escherichia coli (E. coli). Subsequently, DNA transfer was operated by mixing the PIII-treated cells with DNA. Successes in PIII-induced DNA transfer were demonstrated by marker gene expressions. The induction of DNA transfer was ion-energy, fluence and DNA-size dependent. The DNA transferred in the cells was confirmed functioning. Mechanisms of the PIII-induced DNA transfer were investigated and discussed in terms of the E. coli cell envelope anatomy. Compared with conventional ion-beam-induced DNA transfer, PIII-induced DNA transfer was simpler with lower cost but higher efficiency.

  7. Interhead fluorescence energy transfer between probes attached to translationally equivalent sites on the regulatory light chains of scallop myosin.

    PubMed

    Chantler, P D; Tao, T

    1986-11-01

    Interhead fluorescence energy transfer studies between probes located at translationally equivalent sites on the two heads of scallop myosin indicates that the distance between such sites is no less than 50 A. Regulatory light chains, possessing either one (Mercenaria, chicken gizzard) or two (Loligo, rabbit skeletal) sulfhydryl groups, were modified either with 1,5-IAEDANS (N'-iodoacetyl-N'-(1-sulfo-5-n-naphthyl)ethylenediamine), as energy transfer donor, or with IAF (5-(iodoacetamido)fluorescein) or DABMI (4-dimethylaminophenylazophenyl-4'-maleimide), as energy transfer acceptor. The sulfhydryl groups on these light chains are located at different positions within the regulatory light-chain primary sequence; this enables one to probe a variety of locations, with respect to regulatory light-chain topology, on each myosin head. These independently modified regulatory light chains were added back to desensitized scallop myosin under a variety of conditions, including biphasic re-addition, the aim being to maximize the number of interhead energy transfer couples present. The efficiency of energy transfer was determined on the same samples by both steady-state and time-decay techniques. Results obtained by these two techniques were in good agreement with each other and indicated that the efficiency of energy transfer did not exceed 20% in any of the hybrids studied. Transfer efficiencies were invariant, irrespective of the presence or absence of MgATP, calcium or actin, either separately or in combination. Results using heavy meromyosin at low ionic strength were identical. It is shown that these results, in conjunction with the results of recent crosslinking studies performed on comparable myosin hybrids, may place certain restrictions on the configurations of the two heads of myosin.

  8. An enzymatically-sensitized sequential and concentric energy transfer relay self-assembled around semiconductor quantum dots.

    PubMed

    Samanta, Anirban; Walper, Scott A; Susumu, Kimihiro; Dwyer, Chris L; Medintz, Igor L

    2015-05-01

    The ability to control light energy within de novo nanoscale structures and devices will greatly benefit their continuing development and ultimate application. Ideally, this control should extend from generating the light itself to its spatial propagation within the device along with providing defined emission wavelength(s), all in a stand-alone modality. Here we design and characterize macromolecular nanoassemblies consisting of semiconductor quantum dots (QDs), several differentially dye-labeled peptides and the enzyme luciferase which cumulatively demonstrate many of these capabilities by engaging in multiple-sequential energy transfer steps. To create these structures, recombinantly-expressed luciferase and the dye-labeled peptides were appended with a terminal polyhistidine sequence allowing for controlled ratiometric self-assembly around the QDs via metal-affinity coordination. The QDs serve to provide multiple roles in these structures including as central assembly platforms or nanoscaffolds along with acting as a potent energy harvesting and transfer relay. The devices are activated by addition of coelenterazine H substrate which is oxidized by luciferase producing light energy which sensitizes the central 625 nm emitting QD acceptor by bioluminescence resonance energy transfer (BRET). The sensitized QD, in turn, acts as a relay and transfers the energy to a first peptide-labeled Alexa Fluor 647 acceptor dye displayed on its surface. This dye then transfers energy to a second red-shifted peptide-labeled dye acceptor on the QD surface through a second concentric Förster resonance energy transfer (FRET) process. Alexa Fluor 700 and Cy5.5 are both tested in the role of this terminal FRET acceptor. Photophysical analysis of spectral profiles from the resulting sequential BRET-FRET-FRET processes allow us to estimate the efficiency of each of the transfer steps. Importantly, the efficiency of each step within this energy transfer cascade can be controlled to

  9. Efficient near-field wireless energy transfer using adiabatic system variations

    DOEpatents

    Hamam, Rafif E; Karalis, Aristeidis; Joannopoulos, John D; Soljacic, Marin

    2014-09-16

    Disclosed is a method for transferring energy wirelessly including transferring energy wirelessly from a first resonator structure to an intermediate resonator structure, wherein the coupling rate between the first resonator structure and the intermediate resonator structure is .kappa..sub.1B, transferring energy wirelessly from the intermediate resonator structure to a second resonator structure, wherein the coupling rate between the intermediate resonator structure and the second resonator structure is .kappa..sub.B2, and during the wireless energy transfers, adjusting at least one of the coupling rates .kappa..sub.1B and .kappa..sub.B2 to reduce energy accumulation in the intermediate resonator structure and improve wireless energy transfer from the first resonator structure to the second resonator structure through the intermediate resonator structure.

  10. Efficient near-field wireless energy transfer using adiabatic system variations

    DOEpatents

    Hamam, Rafif E.; Karalis, Aristeidis; Joannopoulos, John D.; Soljacic, Marin

    2013-01-29

    Disclosed is a method for transferring energy wirelessly including transferring energy wirelessly from a first resonator structure to an intermediate resonator structure, wherein the coupling rate between the first resonator structure and the intermediate resonator structure is .kappa..sub.1B, transferring energy wirelessly from the intermediate resonator structure to a second resonator structure, wherein the coupling rate between the intermediate resonator structure and the second resonator structure is .kappa..sub.B2, and during the wireless energy transfers, adjusting at least one of the coupling rates .kappa..sub.1B and .kappa..sub.B2 to reduce energy accumulation in the intermediate resonator structure and improve wireless energy transfer from the first resonator structure to the second resonator structure through the intermediate resonator structure.

  11. Generalized Förster-Dexter theory of photoinduced intramolecular energy transfer

    NASA Astrophysics Data System (ADS)

    Lin, S. H.; Xiao, W. Z.; Dietz, W.

    1993-05-01

    In this paper, we generalize the Förster-Dexter theory to treat photoinduced electronic energy transfer for a system in dense media and for an isolated system (i.e., a system in the collision-free condition). Instead of expressing the rate of energy transfer in terms of spectral overlap, we obtain the expression of the energy-transfer rate constant by evaluating a Fourier integral using the saddle-point method. In this way, the energy-gap dependence and the effect of temperature and the isotope effect on the energy transfer can be easily studied. The effect of bridge groups connecting between donor and acceptor on the energy transfer is also studied.

  12. Single-collision studies of energy transfer and chemical reaction

    SciTech Connect

    Valentini, J.J.

    1993-12-01

    The research focus in this group is state-to-state dynamics of reaction and energy transfer in collisions of free radicals such as H, OH, and CH{sub 3} with H{sub 2}, alkanes, alcohols and other hydrogen-containing molecules. The motivation for the work is the desire to provide a detailed understanding of the chemical dynamics of prototype reactions that are important in the production and utilization of energy sources, most importantly in combustion. The work is primarily experimental, but with an important and growing theoretical/computational component. The focus of this research program is now on reactions in which at least one of the reactants and one of the products is polyatomic. The objective is to determine how the high dimensionality of the reactants and products differentiates such reactions from atom + diatom reactions of the same kinematics and energetics. The experiments use highly time-resolved laser spectroscopic methods to prepare reactant states and analyze the states of the products on a single-collision time scale. The primary spectroscopic tool for product state analysis is coherent anti-Stokes Raman scattering (CARS) spectroscopy. CARS is used because of its generality and because the extraction of quantum state populations from CARS spectra is straightforward. The combination of the generality and easy analysis of CARS makes possible absolute cross section measurements (both state-to-state and total), a particularly valuable capability for characterizing reactive and inelastic collisions. Reactant free radicals are produced by laser photolysis of appropriate precursors. For reactant vibrational excitation stimulated Raman techniques are being developed and implemented.

  13. Electronic resonance with anticorrelated pigment vibrations drives photosynthetic energy transfer outside the adiabatic framework

    PubMed Central

    Tiwari, Vivek; Peters, William K.; Jonas, David M.

    2013-01-01

    The delocalized, anticorrelated component of pigment vibrations can drive nonadiabatic electronic energy transfer in photosynthetic light-harvesting antennas. In femtosecond experiments, this energy transfer mechanism leads to excitation of delocalized, anticorrelated vibrational wavepackets on the ground electronic state that exhibit not only 2D spectroscopic signatures attributed to electronic coherence and oscillatory quantum energy transport but also a cross-peak asymmetry not previously explained by theory. A number of antennas have electronic energy gaps matching a pigment vibrational frequency with a small vibrational coordinate change on electronic excitation. Such photosynthetic energy transfer steps resemble molecular internal conversion through a nested intermolecular funnel. PMID:23267114

  14. Modeling the Transfer Function for the Dark Energy Survey

    DOE PAGES

    Chang, C.

    2015-03-04

    We present a forward-modeling simulation framework designed to model the data products from the Dark Energy Survey (DES). This forward-model process can be thought of as a transfer function—a mapping from cosmological/astronomical signals to the final data products used by the scientists. Using output from the cosmological simulations (the Blind Cosmology Challenge), we generate simulated images (the Ultra Fast Image Simulator) and catalogs representative of the DES data. In this work we demonstrate the framework by simulating the 244 deg2 coadd images and catalogs in five bands for the DES Science Verification data. The simulation output is compared with themore » corresponding data to show that major characteristics of the images and catalogs can be captured. We also point out several directions of future improvements. Two practical examples—star-galaxy classification and proximity effects on object detection—are then used to illustrate how one can use the simulations to address systematics issues in data analysis. With clear understanding of the simplifications in our model, we show that one can use the simulations side-by-side with data products to interpret the measurements. This forward modeling approach is generally applicable for other upcoming and future surveys. It provides a powerful tool for systematics studies that is sufficiently realistic and highly controllable.« less

  15. Concentric Förster resonance energy transfer imaging.

    PubMed

    Wu, Miao; Algar, W Russ

    2015-08-18

    Concentric Förster resonance energy transfer (cFRET) configurations based on semiconductor quantum dots (QDs) are promising probes for biological sensing because they offer multiplexing capability in a single vector with robust ratiometric detection by exploiting a network of FRET pathways. To expand the scope and utility of cFRET probes, it is necessary to develop and validate cFRET imaging methodology. In this technical note, we present such a methodology using a protease-sensitive cFRET configuration that comprises a green-emitting QD, Alexa Fluor 555 (A555), and Alexa Fluor 647 (A647). Photoluminescence (PL) images were acquired with three filter-based emission channels to permit measurement of A555/QD and A647/QD PL ratios. With reference to calibration samples, these PL ratios were used to calculate quantitative progress curves for proteolytic activity in regions of interest in the acquired images. Importantly, the imaging methodology reproduces quantitative results obtained with a monochromator-based fluorescence plate reader. Spatiotemporal resolution is demonstrated by tracking the activity of two prototypical proteases, trypsin and chymotrypsin, as they diffuse down the length of a capillary. This methodology is expected to enable the future use of cFRET probes for cellular sensing and other imaging assays. PMID:26214686

  16. Theory of coherent resonance energy transfer for coherent initial condition.

    PubMed

    Jang, Seogjoo

    2009-10-28

    A theory of coherent resonance energy transfer [Jang et al., J. Chem. Phys. 129, 101104 (2008)] is extended for coherent initial condition. For the situation where the initial excitation is an arbitrary linear combination of donor and acceptor excitations, a second order time local quantum master equation combined with polaron transformation is derived. Inhomogeneous terms in the resulting equation have contributions not only from initial donor and acceptor populations but also from their coherence terms. Numerical tests are performed for general super Ohmic spectral density where the bath degrees of freedom coupled to donor and acceptor can be correlated with each other. Calculation results demonstrate sensitivity of early nonstationary population dynamics on the relative sign of initial donor and acceptor excitation states. It is shown that contribution of inhomogeneous terms is more significant for coherent initial condition than for localized one. The overall model calculations provide details of the interplay between quantum coherence and nonequilibrium/non-Markovian effects in the time dependent donor population dynamics.

  17. Fluorescence resonance energy transfer in the studies of guanine quadruplexes.

    PubMed

    Juskowiak, Bernard; Takenaka, Shigeori

    2006-01-01

    A guanine (G)-quadruplex DNA motif has recently emerged as a biologically important structure that is believed to interfere with telomere maintenance by telomerase. G-quadruplexes exhibit four-stranded structures containing one or more nucleic acid strands with central channel able to accommodate metal cations. Coordination of certain metal cations stabilizes G-quadruplex as with some promising small organic molecules that promote the formation and/or stabilization of G-quadruplex. Among many techniques employed to explore properties of G-quadruplexes, the fluorescence resonance energy transfer (FRET) technique has been recognized as a powerful tool to study G-quadruplex formation. This review summarizes the current developments in the uses of FRET technique for the fundamental structural investigations and its practical applications. Applications include FRET-based selection of efficient quadruplex-binding ligands, design of a nanomolecular machine, and a molecular aptamer beacon for protein recognition. We also describe a technique for detection of potassium ions in aqueous solution with the use of quadruplex-based sensor (potassium-sensing oligonucleotide).

  18. Ultrafast energy transfer in water-AOT reverse micelles.

    PubMed

    Cringus, Dan; Bakulin, Artem; Lindner, Jörg; Vöhringer, Peter; Pshenichnikov, Maxim S; Wiersma, Douwe A

    2007-12-27

    A spectroscopic investigation of the vibrational dynamics of water in a geometrically confined environment is presented. Reverse micelles of the ternary microemulsion H2O/AOT/n-octane (AOT = bis-2-ethylhexyl sulfosuccinate or aerosol-OT) with diameters ranging from 1 to 10 nm are used as a model system for nanoscopic water droplets surrounded by a soft-matter boundary. Femtosecond nonlinear infrared spectroscopy in the OH-stretching region of H2O fully confirms the core/shell model, in which the entrapped water molecules partition onto two molecular subensembles: a bulk-like water core and a hydration layer near the ionic surfactant headgroups. These two distinct water species display different relaxation kinetics, as they do not exchange vibrational energy. The observed spectrotemporal ultrafast response exhibits a local character, indicating that the spatial confinement influences approximately one molecular layer located near the water-amphiphile boundary. The core of the encapsulated water droplet is similar in its spectroscopic properties to the bulk phase of liquid water, i.e., it does not display any true confinement effects such as droplet-size-dependent vibrational lifetimes or rotational correlation times. Unlike in bulk water, no intermolecular transfer of OH-stretching quanta occurs among the interfacial water molecules or from the hydration shell to the bulk-like core, indicating that the hydrogen bond network near the H2O/AOT interface is strongly disrupted. PMID:18047308

  19. Modeling the Transfer Function for the Dark Energy Survey

    SciTech Connect

    Chang, C.

    2015-03-04

    We present a forward-modeling simulation framework designed to model the data products from the Dark Energy Survey (DES). This forward-model process can be thought of as a transfer function—a mapping from cosmological/astronomical signals to the final data products used by the scientists. Using output from the cosmological simulations (the Blind Cosmology Challenge), we generate simulated images (the Ultra Fast Image Simulator) and catalogs representative of the DES data. In this work we demonstrate the framework by simulating the 244 deg2 coadd images and catalogs in five bands for the DES Science Verification data. The simulation output is compared with the corresponding data to show that major characteristics of the images and catalogs can be captured. We also point out several directions of future improvements. Two practical examples—star-galaxy classification and proximity effects on object detection—are then used to illustrate how one can use the simulations to address systematics issues in data analysis. With clear understanding of the simplifications in our model, we show that one can use the simulations side-by-side with data products to interpret the measurements. This forward modeling approach is generally applicable for other upcoming and future surveys. It provides a powerful tool for systematics studies that is sufficiently realistic and highly controllable.

  20. Reorganization energy of electron transfer processes in ionic fluids: A molecular Debye-Hückel approach

    NASA Astrophysics Data System (ADS)

    Xiao, Tiejun; Song, Xueyu

    2013-03-01

    The reorganization energy of electron transfer processes in ionic fluids is studied under the linear response approximation using a molecule Debye-Hückel theory. Reorganization energies of some model reactants of electron transfer reactions in molten salts are obtained from molecular simulations and a molecule Debye-Hückel approach. Good agreements between simulation results and the results from our theoretical calculations using the same model Hamiltonian are found. Applications of our theory to electron transfer reactions in room temperature ionic liquids further demonstrate that our theoretical approach presents a reliable and accurate methodology for the estimation of reorganization energies of electron transfer reactions in ionic fluids.

  1. Modeling of Energy Transfer for Carbon Nanotube-Based Precision Machining

    NASA Astrophysics Data System (ADS)

    Wong, Basil T.; Pinar Menguc, M.; Vallance, R. Ryan; Rao, Apparao M.

    2003-03-01

    INTRODUCTION Possible use of electron emission from carbon nanotubes (CNTs) for precision machining has been realized only recently. It is hypothesized that by coupling CNT electron emission with radiation transfer mechanism nano-scaled machining can be achieved. A laser, for example, can be used to raise the temperature of the workpiece near its melting point, and a carbon nanotube is then used to transfer additional energy required to the workpiece to complete the removal of minute amount of materials for nanomachining process. To investigate this hypothesis, a detailed numerical/analytical study is conducted. Electron transfer is modeled using a Monte Carlo approach, and a detailed radiation transfer model, including Fresnel reflections is adapted. Based on the numerical simulations we found that a power of one-tenth of a watt is required from a CNT alone to raise the temperature of gold beyond its melting point. However, using a localized heating with a laser, the required power can be reduced by roughly more than a half. This paper outlines the details of the numerical simulation and establishes a set of design guidelines for future nanomachining modalities. We are interested in nanomachining using the CNTs. Our objective is to determine if we can effectively remove tens of atoms from the workpiece by electron transfer from a single CNT and proper laser heating from either side of the workpiece. To reach our goal, energy transfer from a single CNT may not be sufficient. One way to overcome this setback is to preheat the workpiece to a certain temperature through a bulk heating, and using a subsequent localized heating by the laser beam to further increase the temperature of a specified location. Thus only a minimum amount of energy is required from the nanotube to process the material, i.e. to remove tens of atoms. Due to the complicated interactions between propagating electrons and the solid material, obtaining a physically realistic theoretical analysis

  2. Cyanine dyes with high-absorbance cross section as donor chromophores in energy transfer labels

    DOEpatents

    Glazer, A.N.; Mathies, R.A.; Hung, S.C.; Ju, J.

    1998-12-29

    Cyanine dyes are used as the donor fluorophore in energy transfer labels in which light energy is absorbed by a donor fluorophore and transferred to an acceptor fluorophore which responds to the transfer by emitting fluorescent light for detection. The cyanine dyes impart an unusually high sensitivity to the labels thereby improving their usefulness in a wide variety of biochemical procedures, particularly nucleic acid sequencing, nucleic acid fragment sizing, and related procedures. 22 figs.

  3. Forster resonance energy transfer in the system of human serum albumin-xanthene dyes

    NASA Astrophysics Data System (ADS)

    Kochubey, V. I.; Pravdin, A. B.; Melnikov, A. G.; Konstantinova, I.; Alonova, I. V.

    2016-04-01

    The processes of interaction of fluorescent probes: eosin and erythrosine with human serum albumin (HSA) were studied by the methods of absorption and fluorescence spectroscopy. Extinction coefficients of probes were determined. Critical transfer radius and the energy transfer efficiency were defined by fluorescence quenching of HSA. Analysis of the excitation spectra of HSA revealed that the energy transfer process is carried out mainly between tryptophanyl and probes.

  4. Methods of sequencing and detection using energy transfer labels with cyanine dyes as donor chromophores

    DOEpatents

    Glazer, Alexander N.; Mathies, Richard A.; Hung, Su-Chun; Ju, Jingyue

    2000-01-01

    Cyanine dyes are used as the donor fluorophore in energy transfer labels in which light energy is absorbed by a donor fluorophore and transferred to an acceptor fluorophore which responds to the transfer by emitting fluorescent light for detection. The cyanine dyes impart an unusually high sensitivity to the labels thereby improving their usefulness in a wide variety of biochemical procedures, particularly nucleic acid sequencing, nucleic acid fragment sizing, and related procedures.

  5. Cyanine dyes with high-absorbance cross section as donor chromophores in energy transfer labels

    DOEpatents

    Glazer, Alexander N.; Mathies, Richard A.; Hung, Su-Chun; Ju, Jingyue

    1998-01-01

    Cyanine dyes are used as the donor fluorophore in energy transfer labels in which light energy is absorbed by a donor fluorophore and transferred to an acceptor fluorophore which responds to the transfer by emitting fluorescent light for detection. The cyanine dyes impart an unusually high sensitivity to the labels thereby improving their usefulness in a wide variety of biochemical procedures, particularly nucleic acid sequencing, nucleic acid fragment sizing, and related procedures.

  6. Study made of transfer of heat energy through metal joints in vacuum environment

    NASA Technical Reports Server (NTRS)

    Elliot, D. H.

    1967-01-01

    Heat energy transfer is concentrated closely around a melted joint and the temperature drop across it decreases rapidly as the bolt and nut are tightened to a minimum torque level. Flat metal surfaces pressed together display a cyclical improvement in heat energy transfer as the interface pressure is increased.

  7. High resolution IR diode laser study of collisional energy transfer between highly vibrationally excited monofluorobenzene and CO2: the effect of donor fluorination on strong collision energy transfer.

    PubMed

    Kim, Kilyoung; Johnson, Alan M; Powell, Amber L; Mitchell, Deborah G; Sevy, Eric T

    2014-12-21

    Collisional energy transfer between vibrational ground state CO2 and highly vibrationally excited monofluorobenzene (MFB) was studied using narrow bandwidth (0.0003 cm(-1)) IR diode laser absorption spectroscopy. Highly vibrationally excited MFB with E' = ∼41,000 cm(-1) was prepared by 248 nm UV excitation followed by rapid radiationless internal conversion to the electronic ground state (S1→S0*). The amount of vibrational energy transferred from hot MFB into rotations and translations of CO2 via collisions was measured by probing the scattered CO2 using the IR diode laser. The absolute state specific energy transfer rate constants and scattering probabilities for single collisions between hot MFB and CO2 were measured and used to determine the energy transfer probability distribution function, P(E,E'), in the large ΔE region. P(E,E') was then fit to a bi-exponential function and extrapolated to the low ΔE region. P(E,E') and the biexponential fit data were used to determine the partitioning between weak and strong collisions as well as investigate molecular properties responsible for large collisional energy transfer events. Fermi's Golden rule was used to model the shape of P(E,E') and identify which donor vibrational motions are primarily responsible for energy transfer. In general, the results suggest that low-frequency MFB vibrational modes are primarily responsible for strong collisions, and govern the shape and magnitude of P(E,E'). Where deviations from this general trend occur, vibrational modes with large negative anharmonicity constants are more efficient energy gateways than modes with similar frequency, while vibrational modes with large positive anharmonicity constants are less efficient at energy transfer than modes of similar frequency.

  8. Ratio-metric sensor to detect riboflavin via fluorescence resonance energy transfer with ultrahigh sensitivity

    NASA Astrophysics Data System (ADS)

    Wang, Jilong; Su, Siheng; Wei, Junhua; Bahgi, Roya; Hope-Weeks, Louisa; Qiu, Jingjing; Wang, Shiren

    2015-08-01

    In this paper, a novel fluorescence resonance energy transfer (FRET) ration-metric fluorescent probe based on heteroatom N, S doped carbon dots (N, S-CDs) was developed to determine riboflavin in aqueous solutions. The ratio of two emission intensities at different wavelengths is applied to determine the concentration of riboflavin (RF). This method is more effective in reducing the background interference and fluctuation of diverse conditions. Therefore, this probe obtains high sensitivity with a low limit of detection (LOD) of 1.9 nM (0.7 ng/ml) which is in the highest level of all riboflavin detection approaches and higher than single wavelength intensity detection (1.9 μM). In addition, this sensor has a high selectivity of detecting riboflavin in deionized water (pH=7) with other biochemical like amino acids. Moreover, riboflavin in aqueous solution is very sensitive to sunlight and can be degraded to lumiflavin, which is toxic. Because the N, S doped carbon dots cannot serve as an energy donor for N, S doped carbon dots and lumiflavin system, this system makes it easy to determine whether the riboflavin is degraded or not, which is first to be reported. This platform may provide possibilities to build a new and facile fluorescence resonance energy transfer based sensor to detect analytes and metamorphous analytes in aqueous solution.

  9. Midrapidity inclusive densities in high energy pp collisions in additive quark model

    NASA Astrophysics Data System (ADS)

    Shabelski, Yu. M.; Shuvaev, A. G.

    2016-08-01

    High energy (CERN SPS and LHC) inelastic pp (pbar{p}) scattering is treated in the framework of the additive quark model together with Pomeron exchange theory. We extract the midrapidity inclusive density of the charged secondaries produced in a single quark-quark collision and investigate its energy dependence. Predictions for the π p collisions are presented.

  10. Anomalously high efficiencies for electronic energy transfer from saturated to aromatic hydrocarbons at low aromatic concentrations

    SciTech Connect

    Yiming Wang; Johnston, D.B.; Lipsky, S. )

    1993-01-14

    The absolute efficiency of electric energy transfer from cis-decalin excited at 161 nm to 2,5-diphenyloxazole (PPO) has been measured over a PPO concentration range from 1.0 [times] 10[sup [minus]2] to 2.0 [times] 10[sup [minus]5] M via measurements of both the cis-decalin and the PPO fluorescence. At concentrations above ca. 10[sup [minus]3] M, the normal fluorescing state of cis-decalin plays the dominant role in the energy transfer. At lower concentrations, however, there appears to be an important contribution from some other nonfluorescing state of cis-decalin. The fraction of PPO fluorescence generated by this dark state rises from ca.10% at 0.01 M to ca. 70% at 2 [times] 10[sup [minus]5] M. The effects of addition of O[sub 2] of dilution with isooctane, and of cooling to [minus]35[degrees]C on the quantum yield of this process are reported. The results obtained here confirm earlier results with other saturated hydrocarbon donor + aromatic acceptor systems that have suggested the existence of a dark donor state that dominates the transfer process at low acceptor concentrations via some anomalously efficient mechanism. For the system cis-decalin + PPO at 21[degrees]C, the transfer probability for this process at the lowest concentration studied of 2 [times] 10[sup [minus]5] M is 2.5 [times] 10[sup [minus]3] per photon absorbed and 0.060 per dark state produced. 34 refs., 13 figs., 6 tabs.

  11. Energy transfer and energy level decay processes in Tm{sup 3+}-doped tellurite glass

    SciTech Connect

    Gomes, Laercio; Lousteau, Joris; Milanese, Daniel; Scarpignato, Gerardo C.; Jackson, Stuart D.

    2012-03-15

    The primary excited state decay and energy transfer processes in singly Tm{sup 3+}-doped TeO{sub 2}:ZnO:Bi{sub 2}O{sub 3}:GeO{sub 2} (TZBG) glass relating to the {sup 3}F{sub 4}{yields}{sup 3}H{sub 6}{approx}1.85 {mu}m laser transition have been investigated in detail using time-resolved fluorescence spectroscopy. Selective laser excitation of the {sup 3}H{sub 4} manifold at 794 nm, the {sup 3}H{sub 5} manifold at 1220 nm, and {sup 3}F{sub 4} manifold at 1760 nm has established that the {sup 3}H{sub 5} manifold is entirely quenched by multiphonon relaxation in tellurite glass. The luminescence from the {sup 3}H{sub 4} manifold with an emission peak at 1465 nm suffers strong suppression due to cross relaxation that populates the {sup 3}F{sub 4} level with a near quadratic dependence on the Tm{sup 3+} concentration. The {sup 3}F{sub 4} lifetime becomes longer as the Tm{sup 3+} concentration increases due to energy migration and decreases to 2.92 ms when [Tm{sup 3+}] = 4 mol. % as a result of quasi-resonant energy transfer to free OH{sup -} radicals present in the glass at concentrations between 1 x 10{sup 18} cm{sup -3} and 2 x 10{sup 18} cm{sup -3}. Judd-Ofelt theory in conjunction with absorption measurements were used to obtain the radiative lifetimes and branching ratios of the energy levels located below 25 000 cm{sup -1}. The spectroscopic parameters, the cross relaxation and Tm{sup 3+}({sup 3}F{sub 4}) {yields} OH{sup -} energy transfer rates were used in a numerical model for laser transitions emitting at 2335 nm and 1865 nm.

  12. Irradiation of atactic polystyrene: linear energy transfer effects.

    PubMed

    Ferry, M; Ngono-Ravache, Y; Picq, V; Balanzat, E

    2008-09-01

    Atactic glassy polystyrene (PS) has been irradiated in anoxic conditions by electron and ion beams. The induced modifications were followed, in situ, by Fourier transform infrared spectroscopy (FTIR). In-film modifications and hydrocarbon gas release were followed. In-situ measurements allowed one to avoid any spurious oxidation of the films after irradiation and also permitted studying in detail the evolution with dose of the FTIR spectra. The data were quantitatively analyzed, and we present a complete analysis of the effects of the Linear Energy Transfer (LET) on the radiation chemical yields of several radiation-induced modifications (alkynes, allenes, alkenes, benzene, and disubstituted benzenes). For a better understanding of the LET effects, the in-film modifications are compared to H2 release data from the literature and to our measurements of hydrocarbon gaseous molecule yields obtained by us. The overall destruction yield becomes very significant at high LET, and the radiation sensitivity of this aromatic polymer merges with typical values of aliphatic polymers: the radiation resistance conferred at low LET to polystyrene by the phenyl side groups is lost at high LET. This loss of radiation resistance equally affects the aromatic and aliphatic moieties. Monosubstituted alkynes are created above a LET threshold, whereas the other radiation-induced modifications are observed in the whole LET range. Several observations indicate that the phenyl ring is broken at high LET. Comparison of the alkyne yield in PS, polyethylene, and polycarbonate as well as the formation of nitrile bonds in poly(vinylpyridine- co-styrene) are consistent with a cleavage of the phenyl ring as the prominent source of alkynes. As the competing damage mechanisms do not have the same LET evolution, the relative importance of a specific modification on the global damage depends on LET. Some (benzene and disubstituted benzenes) dominate at low LET, while others (in-film alkyne and

  13. Fluorescence Resonance Energy Transfer Studies of DNA Polymerase β

    PubMed Central

    Towle-Weicksel, Jamie B.; Dalal, Shibani; Sohl, Christal D.; Doublié, Sylvie; Anderson, Karen S.; Sweasy, Joann B.

    2014-01-01

    During DNA repair, DNA polymerase β (Pol β) is a highly dynamic enzyme that is able to select the correct nucleotide opposite a templating base from a pool of four different deoxynucleoside triphosphates (dNTPs). To gain insight into nucleotide selection, we use a fluorescence resonance energy transfer (FRET)-based system to monitor movement of the Pol β fingers domain during catalysis in the presence of either correct or incorrect dNTPs. By labeling the fingers domain with ((((2-iodoacetyl)amino)ethyl)amino)naphthalene-1-sulfonic acid (IAEDANS) and the DNA substrate with Dabcyl, we are able to observe rapid fingers closing in the presence of correct dNTPs as the IAEDANS comes into contact with a Dabcyl-labeled, one-base gapped DNA. Our findings show that not only do the fingers close after binding to the correct dNTP, but that there is a second conformational change associated with a non-covalent step not previously reported for Pol β. Further analyses suggest that this conformational change corresponds to the binding of the catalytic metal into the polymerase active site. FRET studies with incorrect dNTP result in no changes in fluorescence, indicating that the fingers do not close in the presence of incorrect dNTP. Together, our results show that nucleotide selection initially occurs in an open fingers conformation and that the catalytic pathways of correct and incorrect dNTPs differ from each other. Overall, this study provides new insight into the mechanism of substrate choice by a polymerase that plays a critical role in maintaining genome stability. PMID:24764311

  14. Irradiation of atactic polystyrene: linear energy transfer effects.

    PubMed

    Ferry, M; Ngono-Ravache, Y; Picq, V; Balanzat, E

    2008-09-01

    Atactic glassy polystyrene (PS) has been irradiated in anoxic conditions by electron and ion beams. The induced modifications were followed, in situ, by Fourier transform infrared spectroscopy (FTIR). In-film modifications and hydrocarbon gas release were followed. In-situ measurements allowed one to avoid any spurious oxidation of the films after irradiation and also permitted studying in detail the evolution with dose of the FTIR spectra. The data were quantitatively analyzed, and we present a complete analysis of the effects of the Linear Energy Transfer (LET) on the radiation chemical yields of several radiation-induced modifications (alkynes, allenes, alkenes, benzene, and disubstituted benzenes). For a better understanding of the LET effects, the in-film modifications are compared to H2 release data from the literature and to our measurements of hydrocarbon gaseous molecule yields obtained by us. The overall destruction yield becomes very significant at high LET, and the radiation sensitivity of this aromatic polymer merges with typical values of aliphatic polymers: the radiation resistance conferred at low LET to polystyrene by the phenyl side groups is lost at high LET. This loss of radiation resistance equally affects the aromatic and aliphatic moieties. Monosubstituted alkynes are created above a LET threshold, whereas the other radiation-induced modifications are observed in the whole LET range. Several observations indicate that the phenyl ring is broken at high LET. Comparison of the alkyne yield in PS, polyethylene, and polycarbonate as well as the formation of nitrile bonds in poly(vinylpyridine- co-styrene) are consistent with a cleavage of the phenyl ring as the prominent source of alkynes. As the competing damage mechanisms do not have the same LET evolution, the relative importance of a specific modification on the global damage depends on LET. Some (benzene and disubstituted benzenes) dominate at low LET, while others (in-film alkyne and

  15. Multi-state charge transfer dynamics and trapping of hyperthermal and low energy alkali ions

    NASA Astrophysics Data System (ADS)

    Dahl, Eric Brian

    Experimental and theoretical studies were performed of the scattering of hyperthermal and keV energy Lisp+ and Nasp+ ions from Cu(001) surfaces. Chapter one presents measurements of relative total Li(2p) and Na(3p) yields, for 400 eV Lisp+ and 1320 eV Nasp+ scattering from clean and alkali-covered Cu(001). These excited-state yields were measured because they provide a sensitive test of multi-state models of resonant charge transfer, that is, models that are capable of treating more than two atomic states. Chapter two presents a detailed conceptual analysis of two multi-state models: a rate-equation model and the Marston model. The rate-equation model fails to reproduce the measured Li(2p) and Na(3p) yields, whereas the Marston model reproduces the primary trends in the yields. The different behaviors of these models are explained by physical reasoning. The rate-equation model is a fundamentally flawed description of resonant charge transfer, because it includes neither hybridization nor non-adiabatic excitations. Both aspects of resonant charge transfer are required to explain the Li(2p) and Na(3p) yields. These aspects are included in the Marston model, which describes the atom-metal system quantum-mechanically. The quantum mechanics of the atom-metal system can be understood from a physical viewpoint by the use of a few basic principles-principles which are broadly applicable to resonant charge transfer. A key principle is the tendency of the atom-metal system to electronically equilibrate throughout the scattering trajectory of an atom. Additional principles follow from an examination of the many-electron basis states of the atom-metal system. Chapter three presents measurements of the probability that 5 to 600 eV Nasp+ ions incident on Cu(001) become trapped on top of the surface. At a near-normal incident geometry the on-top trapping probability decreased monotonically as the incident energy was decreased. At 45sp° incidence along the < 100> azimuth, a

  16. Transfer of battery technology developed by the US Department of Energy

    SciTech Connect

    Walsh, W.J.; Symons, P.C.

    1984-08-01

    This study examines linkages between government and the private sector in battery research and development, investigates industry's use of advances in battery technology developed with funding from the US Department of Energy (DOE), and explores the appropriate federal role. The industrial viewpoint was obtained through interviews with 25 commercial battery developers. This report describes candidate electrochemical technologies, analyzes past and present government/industry interfaces, documents technological advances and private sector outcomes, and recommends ways to enhance transfer of DOE-developed technology to industry. A major study finding is that industry can promptly and effectively translate battery advances with commercial potential into new products, and that aggressive technology transfer activities by DOE are unnecessary. Major US battery companies were found to be highly knowledgeable with respect to DOE program content and technological advances attained. In addition, liberal patent waivers have allowed companies to build proprietary positions, and technology diffusion within the private sector can be rapid and efficient. It appears that DOE can best increase the transfer of technology to industry by simply creating advances with commercial potential at a faster rate. Principal recommendations include: (1) an expanded advisory role for industry; (2) increased programmatic flexibility; (3) greater efforts aimed at quantum advances; and (4) increased technical autonomy for industrial contractors.

  17. Goal-directed and transfer-cue-elicited drug-seeking are dissociated by pharmacotherapy: evidence for independent additive controllers.

    PubMed

    Hogarth, Lee

    2012-07-01

    According to contemporary learning theory, drug-seeking behavior reflects the summation of 2 dissociable controllers. Whereas goal-directed drug-seeking is determined by the expected current incentive value of the drug, stimulus-elicited drug-seeking is determined by the expected probability of the drug independently of its current incentive value, and these 2 controllers contribute additively to observed drug-seeking. One applied prediction of this model is that smoking cessation pharmacotherapies selectively attenuate tonic but not cue-elicited craving because they downgrade the expected incentive value of the drug but leave expected probability intact. To test this, the current study examined whether nicotine replacement therapy (NRT) nasal spray would modify goal-directed tobacco choice in a human outcome devaluation procedure, but leave cue-elicited tobacco choice in a Pavlovian to instrumental transfer (PIT) procedure intact. Smokers (N= 96) first underwent concurrent choice training in which 2 responses earned tobacco or chocolate points, respectively. Participants then ingested either NRT nasal spray (1 mg) or chocolate (147 g) to devalue 1 outcome. Concurrent choice was then tested again in extinction to measure goal-directed control of choice, and in a PIT test to measure the extent to which tobacco and chocolate stimuli enhanced choice of the same outcome. It was found that NRT modified tobacco choice in the extinction test but not the extent to which the tobacco stimulus enhanced choice of the tobacco outcome in the PIT test. This dissociation suggests that the propensity to engage in drug-seeking is determined independently by the expected value and probability of the drug, and that pharmacotherapy has partial efficacy because it selectively effects expected drug value.

  18. Goal-directed and transfer-cue-elicited drug-seeking are dissociated by pharmacotherapy: evidence for independent additive controllers.

    PubMed

    Hogarth, Lee

    2012-07-01

    According to contemporary learning theory, drug-seeking behavior reflects the summation of 2 dissociable controllers. Whereas goal-directed drug-seeking is determined by the expected current incentive value of the drug, stimulus-elicited drug-seeking is determined by the expected probability of the drug independently of its current incentive value, and these 2 controllers contribute additively to observed drug-seeking. One applied prediction of this model is that smoking cessation pharmacotherapies selectively attenuate tonic but not cue-elicited craving because they downgrade the expected incentive value of the drug but leave expected probability intact. To test this, the current study examined whether nicotine replacement therapy (NRT) nasal spray would modify goal-directed tobacco choice in a human outcome devaluation procedure, but leave cue-elicited tobacco choice in a Pavlovian to instrumental transfer (PIT) procedure intact. Smokers (N= 96) first underwent concurrent choice training in which 2 responses earned tobacco or chocolate points, respectively. Participants then ingested either NRT nasal spray (1 mg) or chocolate (147 g) to devalue 1 outcome. Concurrent choice was then tested again in extinction to measure goal-directed control of choice, and in a PIT test to measure the extent to which tobacco and chocolate stimuli enhanced choice of the same outcome. It was found that NRT modified tobacco choice in the extinction test but not the extent to which the tobacco stimulus enhanced choice of the tobacco outcome in the PIT test. This dissociation suggests that the propensity to engage in drug-seeking is determined independently by the expected value and probability of the drug, and that pharmacotherapy has partial efficacy because it selectively effects expected drug value. PMID:22823420

  19. Magnetic to magnetic and kinetic to magnetic energy transfers at the top of the Earth's core

    NASA Astrophysics Data System (ADS)

    Huguet, Ludovic; Amit, Hagay; Alboussière, Thierry

    2016-11-01

    We develop the theory for the magnetic to magnetic and kinetic to magnetic energy transfer between different spherical harmonic degrees due to the interaction of fluid flow and radial magnetic field at the top of the Earth's core. We show that non-zero secular variation of the total magnetic energy could be significant and may provide evidence for the existence of stretching secular variation, which suggests the existence of radial motions at the top of the Earth's core-whole core convection or MAC waves. However, the uncertainties of the small scales of the geomagnetic field prevent a definite conclusion. Combining core field and flow models we calculate the detailed magnetic to magnetic and kinetic to magnetic energy transfer matrices. The magnetic to magnetic energy transfer shows a complex behaviour with local and non-local transfers. The spectra of magnetic to magnetic energy transfers show clear maxima and minima, suggesting an energy cascade. The kinetic to magnetic energy transfers, which are much weaker due to the weak poloidal flow, are either local or non-local between degree one and higher degrees. The patterns observed in the matrices resemble energy transfer patterns that are typically found in 3-D MHD numerical simulations.

  20. Energy transfers in large-scale and small-scale dynamos

    NASA Astrophysics Data System (ADS)

    Samtaney, Ravi; Kumar, Rohit; Verma, Mahendra

    2015-11-01

    We present the energy transfers, mainly energy fluxes and shell-to-shell energy transfers in small-scale dynamo (SSD) and large-scale dynamo (LSD) using numerical simulations of MHD turbulence for Pm = 20 (SSD) and for Pm = 0.2 on 10243 grid. For SSD, we demonstrate that the magnetic energy growth is caused by nonlocal energy transfers from the large-scale or forcing-scale velocity field to small-scale magnetic field. The peak of these energy transfers move towards lower wavenumbers as dynamo evolves, which is the reason for the growth of the magnetic fields at the large scales. The energy transfers U2U (velocity to velocity) and B2B (magnetic to magnetic) are forward and local. For LSD, we show that the magnetic energy growth takes place via energy transfers from large-scale velocity field to large-scale magnetic field. We observe forward U2U and B2B energy flux, similar to SSD.

  1. The determination of energy transfer rates in the Ho:Tm:Cr:YAG laser material

    NASA Technical Reports Server (NTRS)

    Koker, Edmond B.

    1988-01-01

    Energy transfer processes occurring between atomic, ionic, or molecular systems are very widespread in nature. The applications of such processes range form radiation physics and chemistry to biology. In the field of laser physics, energy transfer processes have been used to extend the lasing range, increase the output efficiency, and influence the spectral and temporal characteristics of the output pulses of energy transfer dye lasers or solid-state laser materials. Thus in the development of solid state lasers, it is important to investigate the basic energy transfer (ET) mechanisms and processes in order to gain detailed knowledge so that successful technical utilization can be achieved. The aim of the present research is to measure the ET rate from a given manifold associated with the chromium sensitizer atom to a given manifold in the holmium activator atom via the thulium transfer atom, in the Ho:Cr:YAG laser material.

  2. Analytic Methods for Predicting Significant Multi-Quanta Effects in Collisional Molecular Energy Transfer

    NASA Technical Reports Server (NTRS)

    Bieniek, Ronald J.

    1996-01-01

    Collision-induced transitions can significantly affect molecular vibrational-rotational populations and energy transfer in atmospheres and gaseous systems. This, in turn. can strongly influence convective heat transfer through dissociation and recombination of diatomics. and radiative heat transfer due to strong vibrational coupling. It is necessary to know state-to-state rates to predict engine performance and aerothermodynamic behavior of hypersonic flows, to analyze diagnostic radiative data obtained from experimental test facilities, and to design heat shields and other thermal protective systems. Furthermore, transfer rates between vibrational and translational modes can strongly influence energy flow in various 'disturbed' environments, particularly where the vibrational and translational temperatures are not equilibrated.

  3. Photoinduced energy and electron transfer in rubrene-benzoquinone and rubrene-porphyrin systems

    NASA Astrophysics Data System (ADS)

    Khan, Jafar I.; Abbas, Abdullah Saud; Aly, Shawkat M.; Usman, Anwar; Melnikov, Vasily A.; Alarousu, Erkki; Mohammed, Omar F.

    2014-11-01

    Excited-state electron and energy transfer from singlet excited rubrene (Ru) to benzoquinone (BQ) and tetra-(4-aminophenyl) porphyrin (TAPP) were investigated by steady-state absorption and emission, time-resolved transient absorption, and femtosecond (fs)-nanosecond (ns) fluorescence spectroscopy. The low reduction potential of BQ provides the high probability of electron transfer from the excited Ru to BQ. Steady-state and time-resolved results confirm such an excited electron transfer scenario. On the other hand, strong spectral overlap between the emission of Ru and absorption of TAPP suggests that energy transfer is a possible deactivation pathway of the Ru excited state.

  4. An enzymatically-sensitized sequential and concentric energy transfer relay self-assembled around semiconductor quantum dots

    NASA Astrophysics Data System (ADS)

    Samanta, Anirban; Walper, Scott A.; Susumu, Kimihiro; Dwyer, Chris L.; Medintz, Igor L.

    2015-04-01

    The ability to control light energy within de novo nanoscale structures and devices will greatly benefit their continuing development and ultimate application. Ideally, this control should extend from generating the light itself to its spatial propagation within the device along with providing defined emission wavelength(s), all in a stand-alone modality. Here we design and characterize macromolecular nanoassemblies consisting of semiconductor quantum dots (QDs), several differentially dye-labeled peptides and the enzyme luciferase which cumulatively demonstrate many of these capabilities by engaging in multiple-sequential energy transfer steps. To create these structures, recombinantly-expressed luciferase and the dye-labeled peptides were appended with a terminal polyhistidine sequence allowing for controlled ratiometric self-assembly around the QDs via metal-affinity coordination. The QDs serve to provide multiple roles in these structures including as central assembly platforms or nanoscaffolds along with acting as a potent energy harvesting and transfer relay. The devices are activated by addition of coelenterazine H substrate which is oxidized by luciferase producing light energy which sensitizes the central 625 nm emitting QD acceptor by bioluminescence resonance energy transfer (BRET). The sensitized QD, in turn, acts as a relay and transfers the energy to a first peptide-labeled Alexa Fluor 647 acceptor dye displayed on its surface. This dye then transfers energy to a second red-shifted peptide-labeled dye acceptor on the QD surface through a second concentric Förster resonance energy transfer (FRET) process. Alexa Fluor 700 and Cy5.5 are both tested in the role of this terminal FRET acceptor. Photophysical analysis of spectral profiles from the resulting sequential BRET-FRET-FRET processes allow us to estimate the efficiency of each of the transfer steps. Importantly, the efficiency of each step within this energy transfer cascade can be controlled to

  5. Sequential energy and electron transfer in a three-component system aligned on a clay nanosheet.

    PubMed

    Fujimura, Takuya; Ramasamy, Elamparuthi; Ishida, Yohei; Shimada, Tetsuya; Takagi, Shinsuke; Ramamurthy, Vaidhyanathan

    2016-02-21

    To achieve the goal of energy transfer and subsequent electron transfer across three molecules, a phenomenon often utilized in artificial light harvesting systems, we have assembled a light absorber (that also serves as an energy donor), an energy acceptor (that also serves as an electron donor) and an electron acceptor on the surface of an anionic clay nanosheet. Since neutral organic molecules have no tendency to adsorb onto the anionic surface of clay, a positively charged water-soluble organic capsule was used to hold neutral light absorbers on the above surface. A three-component assembly was prepared by the co-adsorption of a cationic bipyridinium derivative, cationic zinc porphyrin and cationic octaamine encapsulated 2-acetylanthracene on an exfoliated anionic clay surface in water. Energy and electron transfer phenomena were monitored by steady state fluorescence and picosecond time resolved fluorescence decay. The excitation of 2-acetylanthracene in the three-component system resulted in energy transfer from 2-acetylanthracene to zinc porphyrin with 71% efficiency. Very little loss due to electron transfer from 2-acetylanthracene in the cavitand to the bipyridinium derivative was noticed. Energy transfer was followed by electron transfer from the zinc porphyrin to the cationic bipyridinium derivative with 81% efficiency. Analyses of fluorescence decay profiles confirmed the occurrence of energy transfer and subsequent electron transfer. Merging the concepts of supramolecular chemistry and surface chemistry we realized sequential energy and electron transfer between three hydrophobic molecules in water. Exfoliated transparent saponite clay served as a matrix to align the three photoactive molecules at a close distance in aqueous solutions. PMID:26820105

  6. Zonal-flow-driven nonlinear energy transfer in experiment and simulation

    SciTech Connect

    Holland, C.; Tynan, G. R.; Fonck, R. J.; McKee, G. R.; Candy, J.; Waltz, R. E.

    2007-05-15

    Using a newly developed algorithm, the nonlinear transfer of internal fluctuation energy vertical bar n-tilde vertical bar{sup 2} due to convection of drift-wave turbulence by a geodesic acoustic mode (GAM, a finite-frequency zonal flow) has now been measured directly in a high-temperature plasma. By combining spatially resolved density fluctuation measurements obtained via an upgraded beam emission spectroscopy system in the edge region of the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] with a velocity inference algorithm, the convection of turbulent fluctuations by the GAM has been measured. Taken together, the results strongly suggest that GAM convection of turbulence leads to a transfer of internal fluctuation energy from low to high frequencies, in agreement with expectations from theory and simulation. In addition, the GAM is found to modulate the intensity of the density fluctuations. Calculations of the measured nonlinear interactions in the gyrokinetic code GYRO are found to be in good qualitative agreement with the experimental observations.

  7. Intra-molecular Triplet Energy Transfer is a General Approach to Improve Organic Fluorophore Photostability

    PubMed Central

    Zheng, Qinsi; Jockusch, Steffen; Rodríguez-Calero, Gabriel G.; Zhou, Zhou; Zhao, Hong; Altman, Roger B.; Abruña, Héctor D.; Blanchard, Scott C.

    2015-01-01

    Bright, long-lasting and non-phototoxic organic fluorophores are essential to the continued advancement of biological imaging. Traditional approaches towards achieving photostability, such as the removal of molecular oxygen and the use of small-molecule additives in solution, suffer from potentially toxic side effects, particularly in the context of living cells. The direct conjugation of small-molecule triplet state quenchers, such as cyclooctatetraene (COT), to organic fluorophores has the potential to bypass these issues by restoring reactive fluorophore triplet states to the ground state through intra-molecular triplet energy transfer. Such methods have enabled marked improvement in cyanine fluorophore photostability spanning the visible spectrum. However, the generality of this strategy to chemically and structurally diverse fluorophore species has yet to be examined. Here, we show that the proximal linkage of COT increases the photon yield of a diverse range of organic fluorophores widely used in biological imaging applications, demonstrating that the intra-molecular triplet energy transfer mechanism is a potentially general approach for improving organic fluorophore performance and photostability. PMID:26700693

  8. Intramolecular fluorescence resonance energy transfer and living cell imaging of novel pyridyltriphenylamine dye

    NASA Astrophysics Data System (ADS)

    Cao, Duojun; Qian, Ying

    2016-07-01

    A novel pyridyltriphenylamine-rhodamine dye PTRh and a pyridyltriphenylamine derivative PTO were synthesized and characterized by 1H NMR and HRMS-MALDI-TOF. PTRh performed typical fluorescence resonance energy transfer (FRET) signal from pyridyltriphenylamine to rhodamine along with notable color change from green to rose when interacting with Hg2+ in EtOH/H2O. And PTRh as a ratiometric probe for Hg2+ based on FRET could achieve a very low detection limit of 32 nM and energy transfer efficiency of 83.7% in aqueous organic system. On the other hand, spectra properties of PTO in its aggregates, THF/H2O mixed solution and silica nanoparticles (Si-NPs) dispersed in water were investigated. And the results indicated PTO exhibited bright green fluorescence in solid state, and PTO was successfully encapsulated in silica matrix (30-40 nm), emitting bright blue fluorescence with 11.7% quantum yield. Additionally, living cell imaging experiments demonstrated that PTRh could effectively response to intracellular Hg2+ and PTO-doped Si-NPs were well uptaken by MCF-7 breast cancer cells. It could be concluded that the chromophores are promising materials used as biosensors.

  9. Nanoscale heat transfer and thermoelectrics for alternative energy

    NASA Astrophysics Data System (ADS)

    Robinson, Richard

    2011-03-01

    In the area of alternative energy, thermoelectrics have experienced an unprecedented growth in popularity because of their ability to convert waste heat into electricity. Wired in reverse, thermoelectrics can act as refrigeration devices, where they are promising because they are small in size and lightweight, have no moving parts, and have rapid on/off cycles. However, due to their low efficiencies bulk thermoelectrics have historically been a niche market. Only in the last decade has thermoelectric efficiency exceeded ~ 20 % due to fabrication of nanostructured materials. Nanoscale materials have this advantage because electronic and acoustic confinement effects can greatly increase thermoelectric efficiency beyond bulk values. In this talk, I will introduce our work in the area of nanoscale heat transfer with the goal of more efficient thermoelectrics. I will discuss our experiments and methods to study acoustic confinement in nanostructures and present some of our new nanostructured thermoelectric materials. To study acoustic confinement we are building a nanoscale phonon spectrometer. The instrument can excite phonon modes in nanostructures in the ~ 100 s of GHz. Ballistic phonons from the generator are used to probe acoustic confinement and surface scattering effects. Transmission studies using this device will help optimize materials and morphologies for more efficient nanomaterial-based thermoelectrics. For materials, our group has synthesized nano-layer superlattices of Na x Co O2 . Sodium cobaltate was recently discovered to have a high Seebeck coeficent and is being studied as an oxide thermoelectric material. The thickness of our nano-layers ranges from 5 nm to 300 nm while the lengths can be varied between 10 μ m and 4 mm. Typical aspect ratios are 40 nm: 4 mm, or 1:100,000. Thermoelectric characterization of samples with tilted multiple-grains along the measurement axis indicate a thermoelectric efficiency on par with current polycrystalline samples

  10. Biomolecular interactions probed by fluorescence resonance energy transfer

    NASA Astrophysics Data System (ADS)

    Lange, Daniela Charlotte

    2000-09-01

    This thesis describes how a physical phenomenon, Fluorescence Resonance Energy Transfer (FRET), can be exploited for the study of interactions between biomolecules. The physical basis of this phenomenon is discussed and it is described how some of its characteristics can be exploited in measurement. A recently introduced method, photobleaching FRET microscopy, was implemented and its image analysis refined to suit our biological context. Further, a new technique is proposed, which combines FRET with confocal laser scanning microscopy to optimize resolution and to allow for 3D-studies in living cells. The first part of this thesis presents the application of FRET to the study of oligomerization of G-protein coupled receptors (GPCRs), which was performed at the Fraser Laboratories at McGill University in Montreal. It is demonstrated how FRET microscopy allowed us to circumvent problems of traditional biochemical approaches and provided the first direct evidence for GPCR oligomerization in intact cells. We found that somatostatin receptors (SSTRs) functionally interact by forming oligomers with their own kind, with different SSTR isoforms, and even with distantly related GPCRs, such as dopamine receptors, the latter of which is breaking with the dogma that GPCRs would only pair up with their own kind. The high sensitivity of the FRET technique allowed us to characterize these interactions under more physiological conditions, which lead to the observation that oligomerization is induced by receptor agonist. We further studied the differential effects of agonists and antagonists on receptor oligomerization, leading to a model for the molecular mechanism underlying agonist/antagonist function and receptor activation. The second part was carried out at the Neurobiology Laboratory of the VA Medical Center in Newington, CT. The objective was to further our understanding of Niemann- Pick type C disease, which is characterized by a defect in intracellular cholesterol

  11. Yield Improvement and Energy Savings Uing Phosphonates as Additives in Kraft pulping

    SciTech Connect

    Ulrike W. Tschirner; Timothy Smith

    2007-03-31

    Project Objective: Develop a commercially viable modification to the Kraft process resulting in energy savings, increased yield and improved bleachability. Evaluate the feasibility of this technology across a spectrum of wood species used in North America. Develop detailed fundamental understanding of the mechanism by which phosphonates improve KAPPA number and yield. Evaluate the North American market potential for the use of phosphonates in the Kraft pulping process. Examine determinants of customer perceived value and explore organizational and operational factors influencing attitudes and behaviors. Provide an economic feasibility assessment for the supply chain, both suppliers (chemical supply companies) and buyers (Kraft mills). Provide background to most effectively transfer this new technology to commercial mills.

  12. Radiation and collisional energy transfer among the A 2Pi(i) and X 2Sigma(+) states of CN

    NASA Technical Reports Server (NTRS)

    Huang, Yuhui; Lu, Richang; Halpern, Joshua B.

    1993-01-01

    Laser-photolysis-laser-induced-fluorescence methods are used to characterize the collisional energy transfer between CN (A 2Pi(i) and (X 2Sigma(+)) states and to measure radiative lifetimes of the (A 2Pi(i)) v-prime = 2-7 vibrational levels. In addition, use of the A 2Pi(i) - X 2Sigma(+) system for the laser-induced-fluorescence determination of (X 2Sig(+)) populations is demonstrated and discussed.

  13. Energy Transfer of Excitons Between Quantum Wells Separated by a Wide Barrier

    SciTech Connect

    LYO,SUNGKWUN K.

    1999-12-06

    We present a microscopic theory of the excitonic Stokes and anti-Stokes energy transfer mechanisms between two widely separated unequal quantum wells with a large energy mismatch ({Delta}) at low temperatures (T). Exciton transfer through dipolar coupling, photon-exchange coupling and over-barrier ionization of the excitons through exciton-exciton Auger processes are examined. The energy transfer rate is calculated as a function of T and the center-to-center distance d between the two wells. The rates depend sensitively on T for plane-wave excitons. For located excitons, the rates depend on T only through the T-dependence of the localization radius.

  14. Excitation energy transfer between erythrosin B and malachite green adsorbed on a microheterogeneous polymer latex

    NASA Astrophysics Data System (ADS)

    Dutta, A. K.

    1995-07-01

    In this article electronic excitation energy transfer between the aggregates of the donor erythrosin B (EB) and the acceptor malachite green (MG) has been studied in polystyrenebutylmethacrylate latex. Steady state flourescence quenching studies reveal that with the increasing latex concentration the rate of quenching decreases initially, attains a minimum and then increases again. Such a behaviour has been attributed to aggregation of the dye molecules at low latex concentration and redistribution at larger latex concentrations. These results illustrate the role of the microenvironment in modifying the energy transfer reaction rates and provides a model system for understanding energy transfer mechanisms in context to photosynthesis in real living systems.

  15. Excitation energy transfer from long-persistent phosphors for enhancing power conversion of dye-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Puntambekar, Ajinkya; Chakrapani, Vidhya

    2016-06-01

    Incorporation of inorganic phosphors to improve the spectral absorption range of a dye-sensitized solar cell (DSSC) is a promising strategy to enhance efficiency beyond 15%. However, only marginal improvements have been achieved so far, which is mainly due to the use of nonoptimized device architecture and the lack of understanding of the energy transfer mechanism. Here we report results of DSSCs employing long-persistence phosphor coupled to the sensitizing dye. Detailed time-resolved photoluminescence measurements suggest that excitation energy is transferred radiatively as opposed to Förster resonance energy transfer. As a result of efficient energy transfer, large-area solar cells show a 63% increase in the photocurrent density along with a 54% increase in power conversion efficiency. In addition, the device works as a "nighttime solar cell" with generation of 52 μ W c m-2 power density in the dark. Under short-circuit conditions, the device can output 300 mV for 30 h in the dark.

  16. Depolarization after resonance energy transfer (DARET): a sensitive fluorescence-based assay for botulinum neurotoxin protease activity.

    PubMed

    Gilmore, Marcella A; Williams, Dudley; Okawa, Yumiko; Holguin, Bret; James, Nicholas G; Ross, Justin A; Roger Aoki, K; Jameson, David M; Steward, Lance E

    2011-06-01

    The DARET (depolarization after resonance energy transfer) assay is a coupled Förster resonance energy transfer (FRET)-fluorescence polarization assay for botulinum neurotoxin type A or E (BoNT/A or BoNT/E) proteolytic activity that relies on a fully recombinant substrate. The substrate consists of blue fluorescent protein (BFP) and green fluorescent protein (GFP) flanking SNAP-25 (synaptosome-associated protein of 25 kDa) residues 134-206. In this assay, the substrate is excited with polarized light at 387 nm, which primarily excites the BFP, whereas emission from the GFP is monitored at 509 nm. Energy transfer from the BFP to the GFP in the intact substrate results in a substantial depolarization of the GFP emission. The energy transfer is eliminated when the fluorescent domains separate on cleavage by the endopeptidase, and emission from the directly excited GFP product fragment is then highly polarized, resulting in an overall increase in polarization. This increase in polarization can be monitored to assay the proteolytic activity of BoNT/A and BoNT/E in real time. It allows determination of the turnover rate of the substrate and the kinetic constants (V(max) and k(cat)) based on the concentration of cleaved substrate determined directly from the measurements using the additivity properties of polarization. The assay is amenable to high-throughput applications.

  17. Energy transfer and photochemistry in biomimetic solar conversion

    NASA Astrophysics Data System (ADS)

    Boxer, S. G.

    1987-09-01

    Electron transfer is being studied in several well-defined molecular systems, and techniques for studying electron transfer are being developed. Photo-induced electron transfer lies at the heart of photosynthesis and forms the basis for the approach to biomimetic solar conversion. Electron donors and acceptors are covalently connected to molecular frameworks which permit variation of the distance between sites and the nature of the intervening medium. Myoglobin produced by recombinant DNA methods was modified to place a free sulfhydryl group at various positions on the surface for attachment of electron acceptors. Surface histidine residues are modified with Ru-reagents. Electron donors and acceptors were also attached to double-helical DNA as a first approach to polymer-based donor/acceptor systems. The effects of applied electric fields on the absorption and emission spectra of compounds undergoing electron transfer were studied. The Stark effect spectra of several Ru-complexes were obtained, from which quantitative information on changes in the permanent dipole moment between the ground and the excited state was extracted. It was also shown that, under certain conditions, the electric field can change the rate of electron transfer reactions, and that the effect is easily detected in the electric-field-modulated fluorescence spectrum. These effects were demonstrated for bacterial reaction centers and certain Ru-complexes.

  18. Development of flexible, free-standing, thin films for additive manufacturing and localized energy generation

    SciTech Connect

    Clark, Billy; McCollum, Jena; Pantoya, Michelle L.; Heaps, Ronald J.; Daniels, Michael A.

    2015-08-01

    Film energetics are becoming increasingly popular because a variety of technologies are driving a need for localized energy generation in a stable, safe and flexible form. Aluminum (Al) and molybdenum trioxide (MoO₃) composites were mixed into a silicon binder and extruded using a blade casting technique to form flexible free-standing films ideal for localized energy generation. Since this material can be extruded onto a surface it is well suited to additive manufacturing applications. This study examines the influence of 0-35% by mass potassium perchlorate (KClO₄) additive on the combustion behavior of these energetic films. Without KClO₄ the film exhibits thermal instabilities that produce unsteady energy propagation upon reaction. All films were cast at a thickness of 1 mm with constant volume percent solids to ensure consistent rheological properties. The films were ignited and flame propagation was measured. The results show that as the mass percent KClO₄ increased, the flame speed increased and peaked at 0.43 cm/s and 30 wt% KClO₄. Thermochemical equilibrium simulations show that the heat of combustion increases with increasing KClO₄ concentration up to a maximum at 20 wt% when the heat of combustion plateaus, indicating that the increased chemical energy liberated by the additional KClO₄ promotes stable energy propagation. Differential scanning calorimeter and thermogravimetric analysis show that the silicone binder participates as a fuel and reacts with KClO₄ adding energy to the reaction and promoting propagation.

  19. Measuring distances within unfolded biopolymers using fluorescence resonance energy transfer: The effect of polymer chain dynamics on the observed fluorescence resonance energy transfer efficiency

    PubMed Central

    Makarov, Dmitrii E.; Plaxco, Kevin W.

    2009-01-01

    Recent years have seen a number of investigations in which distances within unfolded proteins, polypeptides, and other biopolymers are probed via fluorescence resonance energy transfer, a method that relies on the strong distance dependence of energy transfer between a pair of dyes attached to the molecule of interest. In order to interpret the results of such experiments it is commonly assumed that intramolecular diffusion is negligible during the excited state lifetime. Here we explore the conditions under which this “frozen chain” approximation fails, leading to significantly underestimated donor-acceptor distances, and describe a means of correcting for polymer dynamics in order to estimate these distances more accurately. PMID:19725638

  20. Mixed O/W emulsions stabilized by solid particles: a model system for controlled mass transfer triggered by surfactant addition.

    PubMed

    Drelich, Audrey; Grossiord, Jean-Louis; Gomez, François; Clausse, Danièle; Pezron, Isabelle

    2012-11-15

    This article deals with a model mixed oil-in-water (O/W) emulsion system developed to study the effect of surfactants on mass transfer between dispersed oil droplets of different composition. In this purpose, our goal was to formulate O/W emulsions without any surface active agents as stabilizer, which was achieved by replacing surfactants by a mixture of hydrophilic/hydrophobic silica particles. Then, to study the specific role of surfactants in the oil transfer process, different types and concentrations of surfactants were added to the mixed emulsion after its preparation. In such a way, the same original emulsion can be used for all experiments and the influence of various surface active molecules on the oil transfer mechanism can be directly studied. The model mixed emulsion used consists of a mixture of hexadecane-in-water and tetradecane-in-water emulsions. The transfer between tetradecane and hexadecane droplets was monitored by using differential scanning calorimetry, which allows the detection of freezing and melting signals characteristic of the composition of the dispersed oil droplets. The results obtained showed that it is possible to trigger the transfer of tetradecane towards hexadecane droplets by adding surfactants at concentrations above their critical micellar concentration, measured in presence of solid particles, through micellar transport mechanism. PMID:22909967

  1. Intense energy transfer and superharmonic resonance in a system of two coupled oscillators.

    PubMed

    Kovaleva, Agnessa; Manevitch, Leonid; Manevitch, Elina

    2010-05-01

    The paper presents the analytic study of energy exchange in a system of coupled nonlinear oscillators subject to superharmonic resonance. The attention is given to complete irreversible energy transfer that occurs in a system with definite initial conditions corresponding to a so-called limiting phase trajectory (LPT). We show that the energy imparted in the system is partitioned among the principal and superharmonic modes but energy exchange can be due to superharmonic oscillations. Using the LPT concept, we construct approximate analytic solutions describing intense irreversible energy transfer in a harmonically excited Duffing oscillator and a system of two nonlinearly coupled oscillators. Numerical simulations confirm the accuracy of the analytic approximations. PMID:20866315

  2. Rotational Energy Transfer of N2 Determined Using a New Ab Initio Potential Energy Surface

    NASA Technical Reports Server (NTRS)

    Huo, Winifred M.; Stallcop, James R.; Partridge, Harry; Langhoff, Stephen R. (Technical Monitor)

    1997-01-01

    A new N2-N2 rigid-rotor surface has been determined using extensive Ab Initio quantum chemistry calculations together with recent experimental data for the second virial coefficient. Rotational energy transfer is studied using the new potential energy surface (PES) employing the close coupling method below 200 cm(exp -1) and coupled state approximation above that. Comparing with a previous calculation based on the PES of van der Avoird et al.,3 it is found that the new PES generally gives larger cross sections for large (delta)J transitions, but for small (delta)J transitions the cross sections are either comparable or smaller. Correlation between the differences in the cross sections and the two PES will be attempted. The computed cross sections will also be compared with available experimental data.

  3. Free energy calculation of water addition coupled to reduction of aqueous RuO4-

    NASA Astrophysics Data System (ADS)

    Tateyama, Yoshitaka; Blumberger, Jochen; Ohno, Takahisa; Sprik, Michiel

    2007-05-01

    Free energy calculations were carried out for water addition coupled reduction of aqueous ruthenate, RuO4-+H2O +e-→[RuO3(OH)2]2-, using Car-Parrinello molecular dynamics simulations. The full reaction is divided into the reduction of the tetrahedral monoanion, RuO4-+e-→RuO42-, followed by water addition, RuO42-+H2O →[RuO3(OH)2]2-. The free energy of reduction is computed from the fluctuations of the vertical energy gap using the MnO4-+e -→MnO42- reaction as reference. The free energy for water addition is estimated using constrained molecular dynamics methods. While the description of this complex reaction, in principle, involves multiple reaction coordinates, we found that reversible transformation of the reactant into the product can be achieved by control of a single reaction coordinate consisting of a suitable linear combination of atomic distances. The free energy difference of the full reaction is computed to be -0.62eV relative to the normal hydrogen electrode. This is in good agreement with the experimental value of -0.59eV, lending further support to the hypothesis that, contrary to the ruthenate monoanion, the dianion is not tetrahedral but forms a trigonal-bipyramidal dihydroxo complex in aqueous solution. We construct an approximate two-dimensional free energy surface using the coupling parameter for reduction and the mechanical constraint for water addition as variables. Analyzing this surface we find that in the most favorable reaction pathway the reduction reaction precedes water addition. The latter takes place via the protonated complex [RuO3(OH)]- and subsequent transport of the created hydroxide ion to the fifth coordination site of Ru.

  4. Quasiclassical trajectory study of collisional energy transfer in toluene systems. II. Helium bath gas: Energy and temperature dependences, and angular momentum transfer

    NASA Astrophysics Data System (ADS)

    Lim, Kieran F.

    1994-11-01

    The collisional deactivation of highly vibrationally excited toluene-d0 and toluene-d8 by helium bath gas has been investigated using quasiclassical trajectory simulations. Collisional energy transfer was found to increase with initial toluene internal energy, in agreement with the experiments of Toselli and Barker [J. Chem. Phys. 97, 1809 (1992), and references therein]. The temperature dependence of <ΔE2>1/2 is predicted to be T(0.44±0.10), in agreement with the experiments of Heymann, Hippler, and Troe [J. Chem. Phys. 80, 1853 (1984)]. Toluene is found to have no net angular-momentum (rotational-energy) transfer to helium bath gas, although <ΔJ2>1/2 has a temperature dependence of T(0.31±0.07). Re-evaluation of earlier calculations [``Paper I:'' Lim, J. Chem. Phys. 100, 7385 (1994)] found that rotational energy transfer could be induced by increasing the mass of the collider, or by increasing the strength of the intermolecular interaction: in these cases, angular-momentum transfer depended on the initial excitation energy. In all cases, the final rotational distributions remained Boltzmann.

  5. A spectroscopist's view of energy states, energy transfers, and chemical reactions.

    PubMed

    Moore, C Bradley

    2007-01-01

    This chapter describes a research career beginning at Berkeley in 1960, shortly after Sputnik and the invention of the laser. Following thesis work on vibrational spectroscopy and the chemical reactivity of small molecules, we studied vibrational energy transfers in my own lab. Collision-induced transfers among vibrations of a single molecule, from one molecule to another, and from vibration to rotation and translation were elucidated. My research group also studied the competition between vibrational relaxation and chemical reaction for potentially reactive collisions with one molecule vibrationally excited. Lasers were used to enrich isotopes by the excitation of a predissociative transition of a selected isotopomer. We also tested the hypotheses of transition-state theory for unimolecular reactions of ketene, formaldehyde, and formyl fluoride by (a) resolving individual molecular eigenstates above a dissociation threshold, (b) locating vibrational levels at the transition state, (c) observing quantum resonances in the barrier region for motion along a reaction coordinate, and (d) studying energy release to fragments. PMID:17034339

  6. Inter-phase heat transfer and energy coupling in turbulent dispersed multiphase flows

    NASA Astrophysics Data System (ADS)

    Ling, Y.; Balachandar, S.; Parmar, M.

    2016-03-01

    The present paper addresses important fundamental issues of inter-phase heat transfer and energy coupling in turbulent dispersed multiphase flows through scaling analysis. In typical point-particle or two-fluid approaches, the fluid motion and convective heat transfer at the particle scale are not resolved and the momentum and energy coupling between fluid and particles are provided by proper closure models. By examining the kinetic energy transfer due to the coupling forces from the macroscale to microscale fluid motion, closure models are obtained for the contributions of the coupling forces to the energy coupling. Due to the inviscid origin of the added-mass force, its contribution to the microscale kinetic energy does not contribute to dissipative transfer to fluid internal energy as was done by the quasi-steady force. Time scale analysis shows that when the particle is larger than a critical diameter, the diffusive-unsteady kernel decays at a time scale that is smaller than the Kolmogorov time scale. As a result, the computationally costly Basset-like integral form of diffusive-unsteady heat transfer can be simplified to a non-integral form. Conventionally, the fluid-to-particle volumetric heat capacity ratio is used to evaluate the relative importance of the unsteady heat transfer to the energy balance of the particles. Therefore, for gas-particle flows, where the fluid-to-particle volumetric heat capacity ratio is small, unsteady heat transfer is usually ignored. However, the present scaling analysis shows that for small fluid-to-particle volumetric heat capacity ratio, the importance of the unsteady heat transfer actually depends on the ratio between the particle size and the Kolmogorov scale. Furthermore, the particle mass loading multiplied by the heat capacity ratio is usually used to estimate the importance of the thermal two-way coupling effect. Through scaling argument, improved estimates are established for the energy coupling parameters of each

  7. Proposal for probing energy transfer pathway by single-molecule pump-dump experiment

    PubMed Central

    Tao, Ming-Jie; Ai, Qing; Deng, Fu-Guo; Cheng, Yuan-Chung

    2016-01-01

    The structure of Fenna-Matthews-Olson (FMO) light-harvesting complex had long been recognized as containing seven bacteriochlorophyll (BChl) molecules. Recently, an additional BChl molecule was discovered in the crystal structure of the FMO complex, which may serve as a link between baseplate and the remaining seven molecules. Here, we investigate excitation energy transfer (EET) process by simulating single-molecule pump-dump experiment in the eight-molecules complex. We adopt the coherent modified Redfield theory and non-Markovian quantum jump method to simulate EET dynamics. This scheme provides a practical approach of detecting the realistic EET pathway in BChl complexes with currently available experimental technology. And it may assist optimizing design of artificial light-harvesting devices. PMID:27277702

  8. Prolonged irradiation of enhanced cyan fluorescent protein or Cerulean can invalidate Forster resonance energy transfer measurements.

    PubMed

    Hoffmann, Birgit; Zimmer, Thomas; Klöcker, Nikolaj; Kelbauskas, Laimonas; König, Karsten; Benndorf, Klaus; Biskup, Christoph

    2008-01-01

    Since its discovery, green fluorescent protein (GFP) and its variants have proven to be a good and convenient fluorescent label for proteins: GFP and other visible fluorescent proteins (VFPs) can be fused selectively to the protein of interest by simple cloning techniques and develop fluorescence without additional cofactors. Among the steadily growing collection of VFPs, several pairs can be chosen that can serve as donor and acceptor fluorophores in Forster resonance energy transfer (FRET) experiments. Among them, the cyan fluorescent proteins (ECFP/Cerulean) and the enhanced yellow fluorescent protein (EYFP) are most commonly used. We show that ECFP and Cerulean have some disadvantages despite their common use: Upon irradiation with light intensities that are commonly used for intensity- and lifetime-based FRET measurements, both the fluorescence intensity and the fluorescence lifetime of ECFP and Cerulean decrease. This can hamper both intensity- and lifetime-based FRET measurements and emphasizes the need for control measurements to exclude these artifacts. PMID:18601529

  9. Excitation of torsional modes of proteins via collisional energy transfer: A quantum dynamical approach

    NASA Astrophysics Data System (ADS)

    Clary, David C.; Meijer, Anthony J. H. M.

    2002-06-01

    Quantum dynamical calculations have been carried out on the excitation of the torsional vibrations of a protein by collision with a solvent molecule. This energy transfer process represents the first step in the unfolding of the protein. The method developed for this purpose is the torsional close coupling, infinite order sudden approximation. Both time-independent and time dependent methods are used to solve the scattering problem and individual excitation of all the torsional modes of the protein is treated. The method is applied to the excitation of the HIV protein gp41 colliding with a water molecule. This protein has 1101 atoms, 56 amino acids, and 452 torsional modes. A major mode-selective effect is found in the computations: it is much easier to excite backbone torsions than sidechain torsions in the protein. In addition, resonances arise in the collisional process and these complexes involve temporary trapping of the water molecule inside the pockets of the protein.

  10. Proposal for probing energy transfer pathway by single-molecule pump-dump experiment.

    PubMed

    Tao, Ming-Jie; Ai, Qing; Deng, Fu-Guo; Cheng, Yuan-Chung

    2016-01-01

    The structure of Fenna-Matthews-Olson (FMO) light-harvesting complex had long been recognized as containing seven bacteriochlorophyll (BChl) molecules. Recently, an additional BChl molecule was discovered in the crystal structure of the FMO complex, which may serve as a link between baseplate and the remaining seven molecules. Here, we investigate excitation energy transfer (EET) process by simulating single-molecule pump-dump experiment in the eight-molecules complex. We adopt the coherent modified Redfield theory and non-Markovian quantum jump method to simulate EET dynamics. This scheme provides a practical approach of detecting the realistic EET pathway in BChl complexes with currently available experimental technology. And it may assist optimizing design of artificial light-harvesting devices. PMID:27277702

  11. Proposal for probing energy transfer pathway by single-molecule pump-dump experiment

    NASA Astrophysics Data System (ADS)

    Tao, Ming-Jie; Ai, Qing; Deng, Fu-Guo; Cheng, Yuan-Chung

    2016-06-01

    The structure of Fenna-Matthews-Olson (FMO) light-harvesting complex had long been recognized as containing seven bacteriochlorophyll (BChl) molecules. Recently, an additional BChl molecule was discovered in the crystal structure of the FMO complex, which may serve as a link between baseplate and the remaining seven molecules. Here, we investigate excitation energy transfer (EET) process by simulating single-molecule pump-dump experiment in the eight-molecules complex. We adopt the coherent modified Redfield theory and non-Markovian quantum jump method to simulate EET dynamics. This scheme provides a practical approach of detecting the realistic EET pathway in BChl complexes with currently available experimental technology. And it may assist optimizing design of artificial light-harvesting devices.

  12. Time-resolved Förster-resonance-energy-transfer DNA assay on an active CMOS microarray

    PubMed Central

    Schwartz, David Eric; Gong, Ping; Shepard, Kenneth L.

    2008-01-01

    We present an active oligonucleotide microarray platform for time-resolved Förster resonance energy transfer (TR-FRET) assays. In these assays, immobilized probe is labeled with a donor fluorophore and analyte target is labeled with a fluorescence quencher. Changes in the fluorescence decay lifetime of the donor are measured to determine the extent of hybridization. In this work, we demonstrate that TR-FRET assays have reduced sensitivity to variances in probe surface density compared with standard fluorescence-based microarray assays. Use of an active array substrate, fabricated in a standard complementary metal-oxide-semiconductor (CMOS) process, provides the additional benefits of reduced system complexity and cost. The array consists of 4096 independent single-photon avalanche diode (SPAD) pixel sites and features on-chip time-to-digital conversion. We demonstrate the functionality of our system by measuring a DNA target concentration series using TR-FRET with semiconductor quantum dot donors. PMID:18515059

  13. A model for energy transfer in collisions of atoms with highly excited molecules.

    PubMed

    Houston, Paul L; Conte, Riccardo; Bowman, Joel M

    2015-05-21

    A model for energy transfer in the collision between an atom and a highly excited target molecule has been developed on the basis of classical mechanics and turning point analysis. The predictions of the model have been tested against the results of trajectory calculations for collisions of five different target molecules with argon or helium under a variety of temperatures, collision energies, and initial rotational levels. The model predicts selected moments of the joint probability distribution, P(Jf,ΔE) with an R(2) ≈ 0.90. The calculation is efficient, in most cases taking less than one CPU-hour. The model provides several insights into the energy transfer process. The joint probability distribution is strongly dependent on rotational energy transfer and conservation laws and less dependent on vibrational energy transfer. There are two mechanisms for rotational excitation, one due to motion normal to the intermolecular potential and one due to motion tangential to it and perpendicular to the line of centers. Energy transfer is found to depend strongly on the intermolecular potential and only weakly on the intramolecular potential. Highly efficient collisions are a natural consequence of the energy transfer and arise due to collisions at "sweet spots" in the space of impact parameter and molecular orientation. PMID:25907301

  14. Chemical Dynamics Simulations of Intermolecular Energy Transfer: Azulene + N2 Collisions.

    PubMed

    Kim, Hyunsik; Paul, Amit K; Pratihar, Subha; Hase, William L

    2016-07-14

    Chemical dynamics simulations were performed to investigate collisional energy transfer from highly vibrationally excited azulene (Az*) in a N2 bath. The intermolecular potential between Az and N2, used for the simulations, was determined from MP2/6-31+G* ab initio calculations. Az* is prepared with an 87.5 kcal/mol excitation energy by using quantum microcanonical sampling, including its 95.7 kcal/mol zero-point energy. The average energy of Az* versus time, obtained from the simulations, shows different rates of Az* deactivation depending on the N2 bath density. Using the N2 bath density and Lennard-Jones collision number, the average energy transfer per collision ⟨ΔEc⟩ was obtained for Az* as it is collisionally relaxed. By comparing ⟨ΔEc⟩ versus the bath density, the single collision limiting density was found for energy transfer. The resulting ⟨ΔEc⟩, for an 87.5 kcal/mol excitation energy, is 0.30 ± 0.01 and 0.32 ± 0.01 kcal/mol for harmonic and anharmonic Az potentials, respectively. For comparison, the experimental value is 0.57 ± 0.11 kcal/mol. During Az* relaxation there is no appreciable energy transfer to Az translation and rotation, and the energy transfer is to the N2 bath. PMID:27182630

  15. Energy spectrum transfer equations of solar wind turbulence

    NASA Technical Reports Server (NTRS)

    Tu, C.-Y.

    1995-01-01

    The recent studies of transfer equations for solar wind magnetohydrodynamic (MHD) turbulence are reviewed with emphasis on the comparison with the statistical observational results. Helios and Voyager missions provide an opportunity to study the the radial evolution of the power spectrum. the cross-helicity the Alfven ratio and the minimum variance direction. Spectrum transfer equations are considered as a tool to explore the nature of this radial evolution of the fluctuations. The transfer equations are derived from incompressible MHD equations. Generally one needs to make assumptions about the nature of the fluctuations and the nature of the turbulent non-linear interactions to obtain numerical results which can be compared with the observations. Some special model results for several simple cases SUCH as for structures or strong mixing. for Alfven waves with weak turbulent interactions. and for a superposition of structures and Alfven waves. are discussed. The difference between the various approaches to derive and handle the transfer equations are also addressed. Finally some theoretical description of the compressible fluctuations are also briefly reviewed.

  16. Picosecond dynamics of energy transfer in porphyrin-sapphyrin noncovalent assemblies

    SciTech Connect

    Springs, S.L.; Gosztola, D.; Wasielewski, M.R.; Kral, V.; Andrievsky, A.; Sessler, J.L.

    1999-03-17

    The picosecond dynamics of noncovalent ensembles for energy transfer based on anion chelation are reported. The photoactive noncovalent complexes are assembled via salt-bridge formation between carboxyl-containing porphyrin photodonors and a monoprotonated pentapyrrolic sapphyrin acceptor. These complexes are formed with a K{sub a} of ca. 10{sup 3} M{sup {minus}1} upon mixing the receptor and substrate in their respective free-acid and free-base forms in CD{sub 2}Cl{sub 2} (as judged by {sup 1}H NMR spectroscopic means). Upon irradiation at 417 nm, singlet-singlet energy transfer from the porphyrin to the sapphyrin subunit takes place readily with energy transfer dynamics that are consistent with a Foerster-type mechanism. The title systems thus appear to be prototypic of a new kind of noncovalent energy transfer modeling that is predicated on the use of anion chelation.

  17. Energy Transfer in Silicon Nanocrystal Solids Made from All-Inorganic Colloidal Silicon Nanocrystals.

    PubMed

    Furuta, Kenta; Fujii, Minoru; Sugimoto, Hiroshi; Imakita, Kenji

    2015-07-16

    Energy transfer between silicon (Si) nanocrystals (NCs) in Si-NC solids was demonstrated by photoluminescence (PL) spectroscopy. Clear differences of PL spectra and the decay rates between solutions and solids of Si-NCs were observed. The change in the PL properties caused by the formation of solids could be explained by the energy transfer from small to large NCs in the size distribution. In order to obtain further evidence of NC-to-NC energy transfer, the size distribution was intentionally modified by mixing solutions of NCs with different size distributions. NC solids made from the mixed solutions exhibited significantly different PL spectral shape and decay rates from those made from unmixed solutions, providing clear evidence of NC-to-NC energy transfer in Si-NC solids.

  18. Simple Model for Gold Nano Particles Concentration Dependence of Resonance Energy Transfer Intensity

    NASA Astrophysics Data System (ADS)

    Hoa, N. M.; Ha, C. V.; Nga, D. T.; Lan, N. T.; Nhung, T. H.; Viet, N. A.

    2016-06-01

    Gold nano particles (GNPs) concentration dependence of the energy transfer occurs between the fluorophores and GNPs is investigated. In the case of theses pairs, GNPs can enhance or quench the fluorescence of fluorophores depending upon the relative magnitudes of two energy transfer mechanisms: i) the plasmonic field enhancement at the fluorophores emission frequencies (plasmon coupled fluorescence enhancement) and ii) the localized plasmon coupled Forster energy transfer from fluorescent particles to gold particles, which quenches the fluorescence. The competition of these mechanisms is depending on the spectral overlap of fluorophores and GNPs, their relative concentration, excitation wavelength. Simple two branches surface plasmon polariton model for GNPs concentration dependence of the energy transfer is proposed. The experimental data and theoretical results confirm our findings.

  19. Temperature dependence of vibrational energy transfer between vibrationally excited polyatomic molecules and bath gases

    NASA Astrophysics Data System (ADS)

    Zalesskaya, G. A.; Yakovlev, D. L.; Sambor, E. G.

    2000-08-01

    Efficiency of vibrational energy transfer (VET) in vibrational quasicontinuum of triplet states was estimated from the dependence of time-resolved delayed fluorescence of benzophenone and anthraquinone on bath gas pressure. The negative temperature dependence for vibration-vibration (V-V) and positive for vibration-translation (V-T) energy transfers from benzophenone and anthraquinone to bath gases (C 2H 4, SF 6, CCl 4, C 5H 12) were obtained between 373 and 553 K. Polarizability and dipole moment of colliding molecules seem to affect the efficiency of V-V relaxation. These data reflect the dominance of long-range attractive interactions in V-V energy transfer and short-range repulsive interactions in V-T energy transfer.

  20. Delocalization-enhanced long-range energy transfer between cryptophyte algae PE545 antenna proteins.

    PubMed

    Hossein-Nejad, Hoda; Curutchet, Carles; Kubica, Aleksander; Scholes, Gregory D

    2011-05-12

    We study the dynamics of interprotein energy transfer in a cluster, consisting of four units of phycoerythrin 545 (PE545) antenna proteins via a hybrid quantum-classical approach. Long-range exciton transport is viewed as a random walk in which the hopping probabilities are determined from a quantum theory. We apply two different formulations of the exciton transport problem to obtain the hopping probabilities, and find that a theory that regards energy transfer as relaxations among the excitonic eigenstates mediated by the vibrational bath, predicts the fastest dynamics. Our results indicate that persistent exciton delocalization is an important implication of the quantum nature of energy transfer on a multiprotein length scale, and that a hybrid quantum-classical approach is a viable starting point in studies of long-range energy transfer in condensed phase biological systems.

  1. Opto-fluidic ring resonator lasers based on highly efficient resonant energy transfer.

    PubMed

    Shopova, Siyka I; Cupps, Jay M; Zhang, Po; Henderson, Edward P; Lacey, Scott; Fan, Xudong

    2007-10-01

    We demonstrate an opto-fluidic ring resonator dye laser using highly efficient energy transfer. The active lasing material consists of a donor and acceptor mixture and flows in a fused silica capillary whose circular cross section forms a ring resonator and supports the whispering gallery modes (WGMs) of high Q-factors (>107). The excited states are created in the donor and transferred to the acceptor through the fluorescence resonant energy transfer (FRET), whose emission is coupled into the WGM. Due to the high energy transfer efficiency and high Q-factors, the acceptor exhibits a lasing threshold as low as 0.3 muJ/mm2. We further analyze the energy transfer mechanisms and find that non-radiative Förster transfer is the dominant effect to support the acceptor lasing. FRET lasers using cascade energy transfer and using quantum dots (QDs) as the donor are also presented. Our study will not only lead to development of novel microfluidic lasers with low lasing thresholds and excitation/emission flexibility, but also open an avenue for future laser intra-cavity bio/chemical sensing.

  2. Drag Reduction by Laser-Plasma Energy Addition in Hypersonic Flow

    SciTech Connect

    Oliveira, A. C.; Minucci, M. A. S.; Toro, P. G. P.; Chanes, J. B. Jr; Myrabo, L. N.

    2008-04-28

    An experimental study was conducted to investigate the drag reduction by laser-plasma energy addition in a low density Mach 7 hypersonic flow. The experiments were conducted in a shock tunnel and the optical beam of a high power pulsed CO{sub 2} TEA laser operating with 7 J of energy and 30 MW peak power was focused to generate the plasma upstream of a hemispherical model installed in the tunnel test section. The non-intrusive schlieren optical technique was used to visualize the effects of the energy addition to hypersonic flow, from the plasma generation until the mitigation of the shock wave profile over the model surface. Aside the optical technique, a piezoelectric pressure transducer was used to measure the impact pressure at stagnation point of the hemispherical model and the pressure reduction could be observed.

  3. Activation energies for addition of O/3P/ to simple olefins.

    NASA Technical Reports Server (NTRS)

    Demore, W. B.

    1972-01-01

    Description of relative rate measurements for the addition of O(3P) to C2H4, C2F4, C3H6, and C4H8-1 in liquid argon at 87.5 K. The data strongly indicate that the activation energies for the addition of O(3P) to the double bonds of propylene and butene-1 are identical, probably to within 0.1 kcal/mole. It is very doubtful that differences in pre-exponential factors or other factors such as solvent effects, could invalidate this conclusion. A similar argument holds for the C2H4 and C2F4 reactions. Furthermore, the experiments suggest that the activation energy for addition of O(3P) to the double bond of butene-1 is about 0.1 kcal/mole.

  4. The energy transfer in the TEMP-4M pulsed ion beam accelerator

    SciTech Connect

    Isakova, Y. I.; Pushkarev, A. I.; Khaylov, I. P.

    2013-07-15

    The results of a study of the energy transfer in the TEMP-4M pulsed ion beam accelerator are presented. The energy transfer efficiency in the Blumlein and a self-magnetically insulated ion diode was analyzed. Optimization of the design of the accelerator allows for 85% of energy transferred from Blumlein to the diode (including after-pulses), which indicates that the energy loss in Blumlein and spark gaps is insignificant and not exceeds 10%–12%. Most losses occur in the diode. The efficiency of energy supplied to the diode to the energy of accelerated ions is 8%–9% for a planar strip self-magnetic MID, 12%–15% for focusing diode and 20% for a spiral self-magnetic MID.

  5. Vibration excitation and energy transfer during ultrasonically assisted drilling

    NASA Astrophysics Data System (ADS)

    Babitsky, V. I.; Astashev, V. K.; Meadows, A.

    2007-12-01

    Successful application of ultrasonically assisted drilling needs dynamic matching of the transducer with the drill bit considered as a continuous system loaded by the nonlinear processing load. When using standard tools this leads to the compatible choice of the transducer and accurate matching of the transducer and tool. The principal dynamical features of this matching are considered. Optimal position of excitation cross section of the drill bit, which depends on the relationship between elasto-dissipative characteristics of the transducer, the drill bit and the work load, is found in general analytical form. The optimal matching preserves the resonant tuning of the transducer and compensates the additional energy losses in the drill bit and processing. This produces also an amplification of vibration amplitude. The effect is achieved through the generation and maintenance of a nonlinear resonant mode of vibration and by active matching of the oscillating system with the dynamic loads imposed by the cutting process with the help of the intelligent electronic feedback circuitry. A prototype of an ultrasonic drilling system has been designed, manufactured. and tested. Improvements of machining characteristics due to superposition of ultrasonic vibration are demonstrated. Substantial improvements in the cutting performance of drill bits lead to benefits in drilling performance, which include faster penetration rates, reduction of tool wear, improvements in the surface finish, roundness and straightness of holes and, in ductile materials, the reduction or even complete elimination of burrs on both the entrance and exit faces of plates. The reduction in the reactive force experienced also causes greatly reduced deformation when drilling through thin, flexible plates and helps to alleviate delamination hazard.

  6. Spectral Properties and Energy Transfer between Ce(3+) and Yb(3+) in the Ca3Sc2Si3O12 Host: Is It an Electron Transfer Mechanism?

    PubMed

    Zhou, Lei; Tanner, Peter A; Ning, Lixin; Zhou, Weijie; Liang, Hongbin; Zheng, Lirong

    2016-07-21

    The downshifting from Ce(3+) blue emission to Yb(3+) near-infrared emission has been studied in the garnet host Ca2.8-2xCe0.1YbxNa0.1+xSc2Si3O12 (x = 0-0.36). The downshifting does not involve quantum cutting, but one incident blue photon is transferred from Ce(3+) to Yb(3+) with an energy transfer efficiency up to 90% when x = 0.36 for the Yb(3+) dopant ion. For x ≤ 0.15, a multiphonon-assisted electric dipole-electric quadrupole mechanism of energy transfer dominates, while for the highest concentration of Yb(3+) employed, the electron transfer mechanism is confirmed. A temperature-dependent increase of the Ce(3+) → Yb(3+) energy transfer rate does not exclusively indicate the electron transfer mechanism. The application of the material to solar energy conversion is indicated. PMID:27331405

  7. Efficient evaluation of collisional energy transfer terms for plasma particle simulations

    NASA Astrophysics Data System (ADS)

    Turrell, A. E.; Sherlock, M.; Rose, S. J.

    2016-02-01

    Particle-based simulations, such as in particle-in-cell (PIC) codes, are widely used in plasma physics research. The analysis of particle energy transfers, as described by the second moment of the Boltzmann equation, is often necessary within these simulations. We present computationally efficient, analytically derived equations for evaluating collisional energy transfer terms from simulations using discrete particles. The equations are expressed as a sum over the properties of the discrete particles.

  8. Synthetic molecular systems based on porphyrins as models for the study of energy transfer in photosynthesis

    NASA Astrophysics Data System (ADS)

    Konovalova, Nadezhda V.; Evstigneeva, Rima P.; Luzgina, Valentina N.

    2001-11-01

    The published data on the synthesis and photochemical properties of porphyrin-based molecular ensembles which represent models of natural photosynthetic light-harvesting complexes are generalised and systematised. The dependence of the transfer of excitation energy on the distance between donor and acceptor components, their mutual arrangement, electronic and environmental factors are discussed. Two mechanisms of energy transfer reactions, viz., 'through space' and 'through bond', are considered. The bibliography includes 96 references.

  9. Universal characteristics of transverse momentum transfer in intermediate energy heavy ion collisions

    NASA Technical Reports Server (NTRS)

    Khan, F.; Townsend, L. W.; Tripathi, R. K.; Cucinotta, F. A.

    1993-01-01

    A microscopic optical model formalism for estimating momentum transfer in intermediate energy heavy ion collisions predicts universal behavior of the transverse component. In particular, for symmetric systems heavier than niobium, it appears that values of P(perpendicular)/A are independent of the mass and charge of the colliding nuclei and vary only with impact parameter and incident beam energy. This suggests that momentum transfer per nucleon saturates to some limiting value with increasing mass.

  10. Energy transfer enhancement by oxygen perturbation of spin-forbidden electronic transitions in aromatic systems

    NASA Astrophysics Data System (ADS)

    Monguzzi, A.; Tubino, R.; Salamone, M. M.; Meinardi, F.

    2010-09-01

    Triplet-triplet energy transfer in multicomponent organic systems is usually entirely ascribed to a Dexter-type mechanism involving only short-range donor/acceptor interactions. We demonstrate that the presence of molecular oxygen introduces a perturbation to the electronic structure of one of the involved moieties which can induce a large increase in the spin-forbidden transition oscillator strength so that the otherwise negligible Förster contribution dominates the overall energy transfer rate.

  11. Energy transfer and energy level decay processes of Er3+ in water-free tellurite glass

    NASA Astrophysics Data System (ADS)

    Gomes, Laercio; Rhonehouse, Daniel; Nguyen, Dan T.; Zong, Jie; Chavez-Pirson, Arturo; Jackson, Stuart D.

    2015-12-01

    This report details the fundamental spectroscopic properties of a new class of water-free tellurite glasses studied for future applications in mid-infrared light generation. The fundamental excited state decay processes relating to the 4I11/2 → 4I13/2 transition in singly Er3+-doped Tellurium Zinc Lanthanum glass have been investigated using time-resolved fluorescence spectroscopy. The excited state dynamics was analyzed for Er2O3 concentrations between 0.5 mol% and 4 mol%. Selective laser excitation of the 4I11/2 energy level at 972 nm and selective laser excitation of the 4I13/2 energy level at 1485 nm has established that in a similar way to other Er3+-doped glasses, a strong energy-transfer upconversion by way of a dipole-dipole interaction between two excited erbium ions in the 4I13/2 level populates the 4I11/2 upper laser level of the 3 μm transition. The 4I13/2 and 4I11/2 energy levels emitted luminescence with peaks located at 1532 nm and 2734 nm respectively with luminescence efficiencies of 100% and 8% for the higher (4 mol.%) concentration sample. Results from numerical simulations showed that a population inversion is reached at a threshold pumping intensity of ∼57 kW cm-2 for a CW laser pump at 976 nm for [Er2O3] = 2 mol.%.

  12. Molecular level energy and electron transfer processes at nanocrystalline titanium dioxide interfaces

    NASA Astrophysics Data System (ADS)

    Farzad, Fereshteh

    This thesis describes photo-induced molecular electron and energy transfer processes occurring at nanocrystalline semiconductor interfaces. The Introductory Chapter provides background and describes how these materials may be useful for solar energy conversion. In Chapter 2, results describing excitation of Ru(deeb)(bpy)2 2+, bis(2,2'-bipyridine)(2,2'-bipyridine-4,4 '-diethylester)ruthenium(II) hexafluorophosphate, bound to nanocrystalline TiO2 thin films, immersed in an acetonitrile bath are presented. The data indicates that light excitation forms predominately long-lived metal-to-ligand charge-transfer, MLCT, excited states under these conditions. Modeling of the data as a function of irradiance has been accomplished assuming parallel unimolecular and bimolecular excited state deactivation processes. The quantum yield for excited state formation depends on the excitation irradiance, consistent with triplet-triplet annihilation processes that occur with k > 1 x 108 s-1. Chapter 3 extends the work described in Chapter 2 to LiClO4 acetonitrile solutions. Li+ addition results in a red shift in the MLCT absorption and photoluminescence, PL, and a concentration dependent quenching of the PL intensity on TiO2. The Li+ induced spectroscopic changes were found to be reversible by varying the electrolyte composition. A second-order kinetic model quantified charge recombination transients. A model is proposed wherein Li+ ion adsorption stabilizes TiO2 acceptor states resulting in energetically more favorable interfacial electron transfer. The photophysical and photoelectrochemical properties of porous nanocrystalline anatase TiO2 electrodes modified with Ru(deeb)(bpy)2 2+, Os(deeb)(bpy)22+, and mixtures of both are described in Chapters 4 and 5. In regenerative solar cells with 0.5 M LiI/0.05 M I2 acetonitrile electrolyte, both compounds efficiently inject electrons into TiO2 producing monochromatic incident photon-to-current efficiencies (IPCE), IPCE (460 nm) = 0.70 + 0

  13. CRISPR-Cas and Restriction-Modification Act Additively against Conjugative Antibiotic Resistance Plasmid Transfer in Enterococcus faecalis.

    PubMed

    Price, Valerie J; Huo, Wenwen; Sharifi, Ardalan; Palmer, Kelli L

    2016-01-01

    Enterococcus faecalis is an opportunistic pathogen and a leading cause of nosocomial infections. Conjugative pheromone-responsive plasmids are narrow-host-range mobile genetic elements (MGEs) that are rapid disseminators of antibiotic resistance in the faecalis species. Clustered regularly interspaced short palindromic repeat (CRISPR)-Cas and restriction-modification confer acquired and innate immunity, respectively, against MGE acquisition in bacteria. Most multidrug-resistant E. faecalis isolates lack CRISPR-Cas and possess an orphan locus lacking cas genes, CRISPR2, that is of unknown function. Little is known about restriction-modification defense in E. faecalis. Here, we explore the hypothesis that multidrug-resistant E. faecalis strains are immunocompromised. We assessed MGE acquisition by E. faecalis T11, a strain closely related to the multidrug-resistant hospital isolate V583 but which lacks the ~620 kb of horizontally acquired genome content that characterizes V583. T11 possesses the E. faecalis CRISPR3-cas locus and a predicted restriction-modification system, neither of which occurs in V583. We demonstrate that CRISPR-Cas and restriction-modification together confer a 4-log reduction in acquisition of the pheromone-responsive plasmid pAM714 in biofilm matings. Additionally, we show that the orphan CRISPR2 locus is functional for genome defense against another pheromone-responsive plasmid, pCF10, only in the presence of cas9 derived from the E. faecalis CRISPR1-cas locus, which most multidrug-resistant E. faecalis isolates lack. Overall, our work demonstrated that the loss of only two loci led to a dramatic reduction in genome defense against a clinically relevant MGE, highlighting the critical importance of the E. faecalis accessory genome in modulating horizontal gene transfer. Our results rationalize the development of antimicrobial strategies that capitalize upon the immunocompromised status of multidrug-resistant E. faecalis. IMPORTANCE

  14. CRISPR-Cas and Restriction-Modification Act Additively against Conjugative Antibiotic Resistance Plasmid Transfer in Enterococcus faecalis.

    PubMed

    Price, Valerie J; Huo, Wenwen; Sharifi, Ardalan; Palmer, Kelli L

    2016-01-01

    Enterococcus faecalis is an opportunistic pathogen and a leading cause of nosocomial infections. Conjugative pheromone-responsive plasmids are narrow-host-range mobile genetic elements (MGEs) that are rapid disseminators of antibiotic resistance in the faecalis species. Clustered regularly interspaced short palindromic repeat (CRISPR)-Cas and restriction-modification confer acquired and innate immunity, respectively, against MGE acquisition in bacteria. Most multidrug-resistant E. faecalis isolates lack CRISPR-Cas and possess an orphan locus lacking cas genes, CRISPR2, that is of unknown function. Little is known about restriction-modification defense in E. faecalis. Here, we explore the hypothesis that multidrug-resistant E. faecalis strains are immunocompromised. We assessed MGE acquisition by E. faecalis T11, a strain closely related to the multidrug-resistant hospital isolate V583 but which lacks the ~620 kb of horizontally acquired genome content that characterizes V583. T11 possesses the E. faecalis CRISPR3-cas locus and a predicted restriction-modification system, neither of which occurs in V583. We demonstrate that CRISPR-Cas and restriction-modification together confer a 4-log reduction in acquisition of the pheromone-responsive plasmid pAM714 in biofilm matings. Additionally, we show that the orphan CRISPR2 locus is functional for genome defense against another pheromone-responsive plasmid, pCF10, only in the presence of cas9 derived from the E. faecalis CRISPR1-cas locus, which most multidrug-resistant E. faecalis isolates lack. Overall, our work demonstrated that the loss of only two loci led to a dramatic reduction in genome defense against a clinically relevant MGE, highlighting the critical importance of the E. faecalis accessory genome in modulating horizontal gene transfer. Our results rationalize the development of antimicrobial strategies that capitalize upon the immunocompromised status of multidrug-resistant E. faecalis. IMPORTANCE

  15. CRISPR-Cas and Restriction-Modification Act Additively against Conjugative Antibiotic Resistance Plasmid Transfer in Enterococcus faecalis

    PubMed Central

    Price, Valerie J.; Huo, Wenwen; Sharifi, Ardalan

    2016-01-01

    ABSTRACT Enterococcus faecalis is an opportunistic pathogen and a leading cause of nosocomial infections. Conjugative pheromone-responsive plasmids are narrow-host-range mobile genetic elements (MGEs) that are rapid disseminators of antibiotic resistance in the faecalis species. Clustered regularly interspaced short palindromic repeat (CRISPR)-Cas and restriction-modification confer acquired and innate immunity, respectively, against MGE acquisition in bacteria. Most multidrug-resistant E. faecalis isolates lack CRISPR-Cas and possess an orphan locus lacking cas genes, CRISPR2, that is of unknown function. Little is known about restriction-modification defense in E. faecalis. Here, we explore the hypothesis that multidrug-resistant E. faecalis strains are immunocompromised. We assessed MGE acquisition by E. faecalis T11, a strain closely related to the multidrug-resistant hospital isolate V583 but which lacks the ~620 kb of horizontally acquired genome content that characterizes V583. T11 possesses the E. faecalis CRISPR3-cas locus and a predicted restriction-modification system, neither of which occurs in V583. We demonstrate that CRISPR-Cas and restriction-modification together confer a 4-log reduction in acquisition of the pheromone-responsive plasmid pAM714 in biofilm matings. Additionally, we show that the orphan CRISPR2 locus is functional for genome defense against another pheromone-responsive plasmid, pCF10, only in the presence of cas9 derived from the E. faecalis CRISPR1-cas locus, which most multidrug-resistant E. faecalis isolates lack. Overall, our work demonstrated that the loss of only two loci led to a dramatic reduction in genome defense against a clinically relevant MGE, highlighting the critical importance of the E. faecalis accessory genome in modulating horizontal gene transfer. Our results rationalize the development of antimicrobial strategies that capitalize upon the immunocompromised status of multidrug-resistant E

  16. Calorimetric measurements of energy transfer efficiency and melting efficiency in CO sub 2 laser beam welding

    SciTech Connect

    Fuerschbach, P.W.

    1990-01-01

    Our previous calorimetric studies of weld melting efficiency and arc efficiency in the GTAW and PAW processes have naturally led us to speculate as to the magnitude of the efficiencies in the LBW process which to data have also not been adequately investigated. Most welding engineers that have had experience with the LBW process are acutely aware that the metals' absorptivity, the surface finish, and the laser wavelength, all play an important role in affecting the energy transfer efficiency, but the extent of their influence and our understanding of the influence of other process variables is not well understood. In addition, it is widely thought that only the LBW or EBW processes can be selected for applications where thermal damage and distortion from the welding process must be kept to a minimum. For these reasons, we have looked forward to performing these calorimetric experiments since they potentially can answer such important questions as: whether or not the melting efficiency of the LBW process is superior to that obtainable with conventional GTAW and PAW welding processes This study was prompted by poor production yields on switching device due to cracking of the ceramic header after final closure welding with the CO{sub 2} LBW process. This calorimetric study was begun in hopes of determining if allowed variations in production process control variables were responsible for increases in heat input and the resulting thermal stresses. By measuring the net heat input to the workpiece with the calorimeter and by measuring the laser output energy and the weld fusion zone size it was possible to determine the magnitudes of both the energy transfer efficiency and the melting efficiency as well as observe their dependence on the process variables. 3 refs.

  17. Excitation relaxation dynamics and energy transfer in fucoxanthin-chlorophyll a/c-protein complexes, probed by time-resolved fluorescence.

    PubMed

    Akimoto, Seiji; Teshigahara, Ayaka; Yokono, Makio; Mimuro, Mamoru; Nagao, Ryo; Tomo, Tatsuya

    2014-09-01

    In algae, light-harvesting complexes contain specific chlorophylls (Chls) and keto-carotenoids; Chl a, Chl c, and fucoxanthin (Fx) in diatoms and brown algae; Chl a, Chl c, and peridinin in photosynthetic dinoflagellates; and Chl a, Chl b, and siphonaxanthin in green algae. The Fx-Chl a/c-protein (FCP) complex from the diatom Chaetoceros gracilis contains Chl c1, Chl c2, and the keto-carotenoid, Fx, as antenna pigments, in addition to Chl a. In the present study, we investigated energy transfer in the FCP complex associated with photosystem II (FCPII) of C. gracilis. For these investigations, we analyzed time-resolved fluorescence spectra, fluorescence rise and decay curves, and time-resolved fluorescence anisotropy data. Chl a exhibited different energy forms with fluorescence peaks ranging from 677 nm to 688 nm. Fx transferred excitation energy to lower-energy Chl a with a time constant of 300fs. Chl c transferred excitation energy to Chl a with time constants of 500-600fs (intra-complex transfer), 600-700fs (intra-complex transfer), and 4-6ps (inter-complex transfer). The latter process made a greater contribution to total Chl c-to-Chl a transfer in intact cells of C. gracilis than in the isolated FCPII complexes. The lower-energy Chl a received excitation energy from Fx and transferred the energy to higher-energy Chl a. This article is part of a special issue entitled: photosynthesis research for sustainability: keys to produce clean energy.

  18. Evidence of energy transfer in nanoparticle-porphyrins conjugates for radiation therapy enhancement

    NASA Astrophysics Data System (ADS)

    Kudinov, Konstantin; Cooper, Daniel; Tyagi, Pooja; Bekah, Devesh; Bhattacharyya, Dhrittiman; Hill, Colin; Ha, Jonathan Kin; Nadeau, Jay; Bradforth, Stephen

    2015-03-01

    We report progress towards combining radiation therapy (RT) and photodynamic therapy (PDT) using scintillating nanoparticle (NP)-photosensitizer conjugates. In this approach, scintillating NPs are excited by clinically relevant ionizing radiation sources and subsequently transfer energy to conjugated photosensitizers via FRET, acting as an energy mediator between ionizing radiation and photosensitizer molecules. The excited photosensitizers generate reactive oxygen species that can induce local damage and immune response. Advantages of the scheme include: 1) Compared with traditional radiation therapy, a possible decrease of the total radiation dose needed to eliminate the lesion; 2) Compared with traditional PDT, the ability to target deeper and more highly pigmented lesions; 3) The possibility of additional photosensitizing effects due to the scintillation of the nanoparticles. In this work, the photosensitizer molecule chlorin e6 was covalently bound to the surface of LaF3:Ce NPs. After conjugation, the photoluminescence intensity of NPs decreased, and fluorescence lifetime of conjugated chlorin e6 became sensitive to excitation wavelength, suggesting rapid FRET. In addition, scintillation spectra of nanoparticles were measured. Preliminary calculations suggest that the observed scintillation efficiencies are sufficient to enhance RT. In vitro cancer cell studies suggest conjugates are taken up by cells. Survival curves with radiation exposure suggest that the particles alone cause radiosensitization comparable to that seen with gold nanoparticles.

  19. On the mechanisms of energy transfer between quantum well and quantum dashes

    NASA Astrophysics Data System (ADS)

    Sek, G.; Kudrawiec, R.; Podemski, P.; Misiewicz, J.; Somers, A.; Höfling, S.; Reithmaier, J. P.; Kamp, M.; Forchel, A.

    2012-08-01

    We investigate energy transfer mechanisms from a quantum well (QW) to quantum dashes (QDashes) separated by a few nanometer thick barrier in InAs/InGaAs/InGaAlAs/InP material system. We show that at sufficiently low temperatures excitons, which are non-resonantly photogenerated in the QW and then transferred to the ground state via phonon relaxation, can be retrieved by QDashes. The excess of the transferred energy, defined by the energy difference between the QW and QDash exciton states, can be dissipated via interaction with LO phonons if the respective energy matching is satisfied. This kind of exciton injection from QW to QDashes is a process insensitive to the energy level structure of the individual exciton components, i.e., electrons and holes. It is shown that within the single particle picture, the electron energy in QDashes is higher by more than 50 meV compared to the corresponding QW energy, which prevents the electron transfer from quantum well to the dashes. We show experimentally that despite this unfavorable energy difference for single carriers whole QW excitons are efficiently transferred to QDashes and recombine there radiatively.

  20. Modeling of MeV alpha particle energy transfer to lower hybrid waves

    SciTech Connect

    Schivell, J.; Monticello, D.A.; Fisch, N.; Rax, J.M.

    1993-10-01

    The interaction between a lower hybrid wave and a fusion alpha particle displaces the alpha particle simultaneously in space and energy. This results in coupled diffusion. Diffusion of alphas down the density gradient could lead to their transferring energy to the wave. This could, in turn, put energy into current drive. An initial analytic study was done by Fisch and Rax. Here the authors calculate numerical solutions for the alpha energy transfer and study a range of conditions that are favorable for wave amplification from alpha energy. They find that it is possible for fusion alpha particles to transfer a large fraction of their energy to the lower hybrid wave. The numerical calculation shows that the net energy transfer is not sensitive to the value of the diffusion coefficient over a wide range of practical values. An extension of this idea, the use of a lossy boundary to enhance the energy transfer, is investigated. This technique is shown to offer a large potential benefit.

  1. Ultrafast Charge- and Energy-Transfer Dynamics in Conjugated Polymer: Cadmium Selenide Nanocrystal Blends

    PubMed Central

    2014-01-01

    Hybrid nanocrystal–polymer systems are promising candidates for photovoltaic applications, but the processes controlling charge generation are poorly understood. Here, we disentangle the energy- and charge-transfer processes occurring in a model system based on blends of cadmium selenide nanocrystals (CdSe-NC) with poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene] (MDMO-PPV) using a combination of time-resolved absorption and luminescence measurements. The use of different capping ligands (n-butylamine, oleic acid) as well as thermal annealing allows tuning of the polymer–nanocrystal interaction. We demonstrate that energy transfer from MDMO-PPV to CdSe-NCs is the dominant exciton quenching mechanism in nonannealed blends and occurs on ultrafast time scales (<1 ps). Upon thermal annealing electron transfer becomes competitive with energy transfer, with a transfer rate of 800 fs independent of the choice of the ligand. Interestingly, we find hole transfer to be much less efficient than electron transfer and to extend over several nanoseconds. Our results emphasize the importance of tuning the organic–nanocrystal interaction to achieve efficient charge separation and highlight the unfavorable hole-transfer dynamics in these blends. PMID:24490650

  2. Long-distance electronic energy transfer in light-harvesting supramolecular polymers.

    PubMed

    Winiger, Christian B; Li, Shaoguang; Kumar, Ganesh R; Langenegger, Simon M; Häner, Robert

    2014-12-01

    The efficient collection of solar energy relies on the design and construction of well-organized light-harvesting systems. Herein we report that supramolecular phenanthrene polymers doped with pyrene are effective collectors of light energy. The linear polymers are formed through the assembly of short amphiphilic oligomers in water. Absorption of light by phenanthrene residues is followed by electronic energy transfer along the polymer over long distances (>100 nm) to the accepting pyrene molecules. The high efficiency of the energy transfer, which is documented by large fluorescence quantum yields, suggests a quantum coherent process.

  3. UV absorption study of collisional energy transfer in vibrationally highly excited SO/sub 2/ molecules

    SciTech Connect

    Heymann, M.; Hippler, H.; Nahr, D.; Plach, H.J.; Troe, J.

    1988-09-22

    Transient UV absorption spectra after UV laser excitation of SO/sub 2/ were recorded and analyzed with respect to collisional energy transfer. Byuse of previously determined calibration curves, the absorption-time signals were converted into average energy-number of collision profiles. Energy-dependent average energies transferred per collision (..delta..E) were derived for 22 different collision partners. The temperature dependence of (..delta..E) was determined over the range 300-1500 K by experiments in a CO/sub 2/ CW laser-heated reactor and in shock waves.

  4. Energy transfer between a nanosystem and its host fluid: A multiscale factorization approach

    SciTech Connect

    Sereda, Yuriy V.; Espinosa-Duran, John M.; Ortoleva, Peter J.

    2014-02-21

    Energy transfer between a macromolecule or supramolecular assembly and a host medium is considered from the perspective of Newton's equations and Lie-Trotter factorization. The development starts by demonstrating that the energy of the molecule evolves slowly relative to the time scale of atomic collisions-vibrations. The energy is envisioned to be a coarse-grained variable that coevolves with the rapidly fluctuating atomistic degrees of freedom. Lie-Trotter factorization is shown to be a natural framework for expressing this coevolution. A mathematical formalism and workflow for efficient multiscale simulation of energy transfer is presented. Lactoferrin and human papilloma virus capsid-like structure are used for validation.

  5. Energy transfer between a nanosystem and its host fluid: A multiscale factorization approach

    NASA Astrophysics Data System (ADS)

    Sereda, Yuriy V.; Espinosa-Duran, John M.; Ortoleva, Peter J.

    2014-02-01

    Energy transfer between a macromolecule or supramolecular assembly and a host medium is considered from the perspective of Newton's equations and Lie-Trotter factorization. The development starts by demonstrating that the energy of the molecule evolves slowly relative to the time scale of atomic collisions-vibrations. The energy is envisioned to be a coarse-grained variable that coevolves with the rapidly fluctuating atomistic degrees of freedom. Lie-Trotter factorization is shown to be a natural framework for expressing this coevolution. A mathematical formalism and workflow for efficient multiscale simulation of energy transfer is presented. Lactoferrin and human papilloma virus capsid-like structure are used for validation.

  6. Combining semiconductor quantum dots and bioscaffolds into nanoscale energy transfer devices.

    PubMed

    Spillmann, Christopher M; Stewart, Michael H; Susumu, Kimihiro; Medintz, Igor L

    2015-11-01

    Significant advances have been made in the development of nanoscale devices capable of exciton transport via Förster resonance energy transfer. Several requirements must be met for effective operation, including a reliable energy-harvesting source along with highly organized, precisely placed energy relay elements. For the latter, biological scaffolds such as DNA provide a customizable, symmetric, and stable structure that can be site-specifically modified with organic fluorophores. Here, advancements in nanoscale energy transfer devices incorporating semiconductor nanocrystals and bioscaffolds are reviewed with discussion of biofunctionalization, linker chemistries, design considerations, and concluding with applications in light harvesting, multiplexed biosensing, and optical logic. PMID:26560627

  7. Observation of the one- to six-neutron transfer reactions at sub-barrier energies

    SciTech Connect

    Jiang, C.L.; Rehm, K.E.; Gehring, J.

    1995-08-01

    It was suggested many years ago that when two heavy nuclei are in contact during a grazing collision, the transfer of several correlated neutron-pairs could occur. Despite considerable experimental effort, however, so far only cross sections for up to four-neutron transfers have been uniquely identified. The main difficulties in the study of multi-neutron transfer reactions are the small cross sections encountered at incident energies close to the barrier, and various experimental uncertainties which can complicate the analysis of these reactions. We have for the first time found evidence for multi-neutron transfer reactions covering the full sequence from one- to six-neutron transfer reactions at sub-barrier energies in the system {sup 58}Ni + {sup 100}Mo.

  8. The role of the concentration scale in the definition of transfer free energies.

    PubMed

    Moeser, Beate; Horinek, Dominik

    2015-01-01

    The Gibbs free energy of transferring a solute at infinite dilution between two solvents quantifies differences in solute-solvent interactions - if the transfer takes place at constant molarity of the solute. Yet, many calculation formulae and measuring instructions that are commonly used to quantify solute-solvent interactions correspond to transfer processes in which not the molarity of the solute but its concentration measured in another concentration scale is constant. Here, we demonstrate that in this case, not only the change in solute-solvent interactions is quantified but also the entropic effect of a volume change during the transfer. Consequently, the "phenomenon" which is known as "concentration-scale dependence" of transfer free energies is simply explained by a volume-entropy effect. Our explanations are of high importance for the study of cosolvent effects on protein stability.

  9. Laboratory Studies of Thermal Energy Charge Transfer of Silicon and Iron Ions in Astrophysical Plasmas

    NASA Technical Reports Server (NTRS)

    Kwong, Victor H. S.

    1996-01-01

    Charge transfer at electron-volt energies between multiply charged atomic ions and neutral atoms and molecules is of considerable importance in astrophysics, plasma physics, and in particular, fusion plasmas. In the year covered by this report, several major tasks were completed. These include: (1) the re-calibration of the ion gauge to measure the absolute particle densities of H2, He, N2, and CO for our current measurements; (2) the analysis of data for charge transfer reactions of N(exp 2 plus) ion and He, H2, N2, and CO; (3) measurement and data analysis of the charge transfer reaction of (Fe(exp 2 plus) ion and H2; (4) charge transfer measurement of Fe(exp 2 plus) ion and H2; and (5) redesign and modification of the ion detection and data acquisition system for the low energy beam facility (reflection time of flight mass spectrometer) dedicated to the study of state select charge transfer.

  10. An electron energy-loss study of picene and chrysene based charge transfer salts

    NASA Astrophysics Data System (ADS)

    Müller, Eric; Mahns, Benjamin; Büchner, Bernd; Knupfer, Martin

    2015-05-01

    The electronic excitation spectra of charge transfer compounds built from the hydrocarbons picene and chrysene, and the strong electron acceptors F4TCNQ (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) and TCNQ (7,7,8,8-tetracyanoquinodimethan) have been investigated using electron energy-loss spectroscopy. The corresponding charge transfer compounds have been prepared by co-evaporation of the pristine constituents. We demonstrate that all investigated combinations support charge transfer, which results in new electronic excitation features at low energy. This might represent a way to synthesize low band gap organic semiconductors.

  11. An electron energy-loss study of picene and chrysene based charge transfer salts.

    PubMed

    Müller, Eric; Mahns, Benjamin; Büchner, Bernd; Knupfer, Martin

    2015-05-14

    The electronic excitation spectra of charge transfer compounds built from the hydrocarbons picene and chrysene, and the strong electron acceptors F4TCNQ (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) and TCNQ (7,7,8,8-tetracyanoquinodimethan) have been investigated using electron energy-loss spectroscopy. The corresponding charge transfer compounds have been prepared by co-evaporation of the pristine constituents. We demonstrate that all investigated combinations support charge transfer, which results in new electronic excitation features at low energy. This might represent a way to synthesize low band gap organic semiconductors.

  12. Path induced coherent energy transfer in light-harvesting complexes in purple bacteria.

    PubMed

    Sun, Kewei; Ye, Jun; Zhao, Yang

    2014-09-28

    Features of path dependent energy transfer in a dual-ring light-harvesting (LH2) complexes (B850) system have been examined in detail systematically. The Frenkel-Dirac time dependent variational method with the Davydov D1 Ansatz is employed with detailed evolution of polaron dynamics in real space readily obtained. It is found that the phase of the transmission amplitude through the LH2 complexes plays an important role in constructing the coherent excitonic energy transfer. It is also found that the symmetry breaking caused by the dimerization of bacteriochlorophylls and coherence or correlation between two rings will be conducive in enhancing the exciton transfer efficiency. PMID:25273408

  13. Degrees of locality of energy transfer in the inertial range. [Kolmogoroff notion in turbulence theory

    NASA Technical Reports Server (NTRS)

    Zhou, YE

    1993-01-01

    Measured raw transfer interactions from which local energy transfer is argued to result are summed in a way that directly indicates the scale disparity (s) of contributions to the net energy flux across the spectrum. It is found that the dependence upon s closely follows the s exp -4/3 form predicted by classical arguments. As a result, it is concluded that direct numerical simulation measurements lend support to the classical Kolmogorov phenomenology of local interactions and local transfer in an inertial range.

  14. An electron energy-loss study of picene and chrysene based charge transfer salts

    SciTech Connect

    Müller, Eric; Mahns, Benjamin; Büchner, Bernd; Knupfer, Martin

    2015-05-14

    The electronic excitation spectra of charge transfer compounds built from the hydrocarbons picene and chrysene, and the strong electron acceptors F{sub 4}TCNQ (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) and TCNQ (7,7,8,8-tetracyanoquinodimethan) have been investigated using electron energy-loss spectroscopy. The corresponding charge transfer compounds have been prepared by co-evaporation of the pristine constituents. We demonstrate that all investigated combinations support charge transfer, which results in new electronic excitation features at low energy. This might represent a way to synthesize low band gap organic semiconductors.

  15. Reduction of ammonia emission by shallow slurry injection: injection efficiency and additional energy demand.

    PubMed

    Hansen, Martin N; Sommer, Sven G; Madsen, Niels P

    2003-01-01

    Ammonia (NH3) emission from livestock production causes undesirable environmental effects and a loss of plant-available nitrogen. Much atmospheric NH3 is lost from livestock manure applied in the field. The NH3 emission may be reduced by slurry injection, but slurry injection in general, and especially on grassland, increases the energy demand and places heavy demands on the slurry injection techniques used. The reduction in NH3 emission, injection efficiency, and energy demand of six different shallow slurry-injection techniques was examined. The NH3 emission from cattle slurry applied to grassland was reduced by all the injectors tested in the study, but there were major differences in the NH3 reduction potential of the different types of injectors. Compared with the trailing hose spreading technique, the NH3 loss was reduced by 75% when cattle slurry was injected using the most efficient slurry injection technique, and by 20% when incorporated by the least efficient injection technique. The reduction in NH3 emission was correlated with injection depth and the volume of the slot created. The additional energy demand for reducing ammonia emissions by slurry injection was approximately 13 000 kJ ha(-1) for a 20% reduction and 34 000 kJ ha(-1) for a 75% reduction. The additional energy demand corresponds to additional emissions of, respectively, 5.6 and 14.5 kg CO2 per ha injected.

  16. Investigation of energy transfer mechanisms between two adjacent phosphorescent emission layers

    NASA Astrophysics Data System (ADS)

    Diez, Carola; Reusch, Thilo C. G.; Seidel, Stefan; Brütting, Wolfgang

    2012-06-01

    The investigation of energy transfer mechanisms between two adjacent phosphorescent emission layers comprising the green emitter molecule fac-tris(2-phenly-pyridin)iridium (Ir(ppy)3) and the red emitter molecule iridium(III)bis(2-methyldibenzo[f,h]quinoxaline(acetylacetonate) (Ir(MDQ)2(acac)) is presented. We show that the performance can be enhanced by a variation of the emission layer thickness and the emitter concentration. By inserting different interlayer materials between the emission units, we demonstrate that triplet excitons are formed on the Ir(ppy)3 and subsequently transferred to the Ir(MDQ)2(acac) molecules via the hole transporting host material N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)-benzidine of the red emission layer. The variation of the interlayer thickness shows that the triplet diffusion length is several tens of nanometers. After optimization of the guest-host system an efficiency enhancement by 15% was achieved and the lifetime of the red-green emissive unit could be enhanced by 55%. Additionally, it is shown that this improved red-green unit can be combined with a fluorescent blue emitter in a state-of-the-art stacked white emissive organic light emitting diode.

  17. High Energy Density Additives for Hybrid Fuel Rockets to Improve Performance and Enhance Safety

    NASA Technical Reports Server (NTRS)

    Jaffe, Richard L.

    2014-01-01

    We propose a conceptual study of prototype strained hydrocarbon molecules as high energy density additives for hybrid rocket fuels to boost the performance of these rockets without compromising safety and reliability. Use of these additives could extend the range of applications for which hybrid rockets become an attractive alternative to conventional solid or liquid fuel rockets. The objectives of the study were to confirm and quantify the high enthalpy of these strained molecules and to assess improvement in rocket performance that would be expected if these additives were blended with conventional fuels. We confirmed the chemical properties (including enthalpy) of these additives. However, the predicted improvement in rocket performance was too small to make this a useful strategy for boosting hybrid rocket performance.

  18. The optimization based dynamic and cyclic working strategies for rechargeable wireless sensor networks with multiple base stations and wireless energy transfer devices.

    PubMed

    Ding, Xu; Han, Jianghong; Shi, Lei

    2015-03-16

    In this paper, the optimal working schemes for wireless sensor networks with multiple base stations and wireless energy transfer devices are proposed. The wireless energy transfer devices also work as data gatherers while charging sensor nodes. The wireless sensor network is firstly divided into sub networks according to the concept of Voronoi diagram. Then, the entire energy replenishing procedure is split into the pre-normal and normal energy replenishing stages. With the objective of maximizing the sojourn time ratio of the wireless energy transfer device, a continuous time optimization problem for the normal energy replenishing cycle is formed according to constraints with which sensor nodes and wireless energy transfer devices should comply. Later on, the continuous time optimization problem is reshaped into a discrete multi-phased optimization problem, which yields the identical optimality. After linearizing it, we obtain a linear programming problem that can be solved efficiently. The working strategies of both sensor nodes and wireless energy transfer devices in the pre-normal replenishing stage are also discussed in this paper. The intensive simulations exhibit the dynamic and cyclic working schemes for the entire energy replenishing procedure. Additionally, a way of eliminating "bottleneck" sensor nodes is also developed in this paper.

  19. The Optimization Based Dynamic and Cyclic Working Strategies for Rechargeable Wireless Sensor Networks with Multiple Base Stations and Wireless Energy Transfer Devices

    PubMed Central

    Ding, Xu; Han, Jianghong; Shi, Lei

    2015-01-01

    In this paper, the optimal working schemes for wireless sensor networks with multiple base stations and wireless energy transfer devices are proposed. The wireless energy transfer devices also work as data gatherers while charging sensor nodes. The wireless sensor network is firstly divided into sub networks according to the concept of Voronoi diagram. Then, the entire energy replenishing procedure is split into the pre-normal and normal energy replenishing stages. With the objective of maximizing the sojourn time ratio of the wireless energy transfer device, a continuous time optimization problem for the normal energy replenishing cycle is formed according to constraints with which sensor nodes and wireless energy transfer devices should comply. Later on, the continuous time optimization problem is reshaped into a discrete multi-phased optimization problem, which yields the identical optimality. After linearizing it, we obtain a linear programming problem that can be solved efficiently. The working strategies of both sensor nodes and wireless energy transfer devices in the pre-normal replenishing stage are also discussed in this paper. The intensive simulations exhibit the dynamic and cyclic working schemes for the entire energy replenishing procedure. Additionally, a way of eliminating “bottleneck” sensor nodes is also developed in this paper. PMID:25785305

  20. Molecular-Based Theory for Electron-Transfer Reorganization Energy in Solvent Mixtures.

    PubMed

    Zhuang, Bilin; Wang, Zhen-Gang

    2016-07-01

    Using statistical-field techniques, we develop a molecular-based dipolar self-consistent-field theory (DSCFT) for charge solvation in liquid mixtures under equilibrium and nonequilibrium conditions, and apply it to compute the solvent reorganization energy of electron-transfer reactions. In addition to the nonequilibrium orientational polarization, the reorganization energy in liquid mixtures is also determined by the out-of-equilibrium solvent composition around the reacting species due to preferential solvation. Using molecular parameters that are readily available, the DSCFT naturally accounts for the dielectric saturation effect and the spatially varying solvent composition in the vicinity of the reacting species. We identify three general categories of binary solvent mixtures, classified by the relative optical and static dielectric permittivities of the solvent components. Each category of mixture is shown to produce a characteristic local solvent composition profile in the vicinity of the reacting species, which gives rise to the distinctive composition dependence of the reorganization energy that cannot be predicted using the dielectric permittivities of the homogeneous solvent mixtures. PMID:27187110

  1. A rapid multi-device wireless power transfer scheme using an intermediate energy storage

    NASA Astrophysics Data System (ADS)

    Yoon, C. S.; Nam, S. S.; Cho, S. H.

    2016-04-01

    We introduce a new time-division multiplex wireless power transfer (TDM-WPT) scheme for charging multiple devices with a single transmitter. More specifically, our proposed scheme adopts the intermediate energy storage (IES) circuit which enables storing the received energy from the source temporarily and then supplying it to the load. Thus, by adopting the IES, the receiver can charge the battery with the stored energy in the IES even while the receiver is not performing the direct charging process (from the transmitter). This allows charging multiple receivers simultaneously in a virtual manner, and it eventually leads to the reduction of overall charging time. For the theoretical verification, we analyse the performance of our proposed scheme based on the identical environment and in some selected results. We show that with our proposed scheme the required total charging time can be reduced compared to the conventional TDM-WPT. We also consider practical load (battery charger) requirements which change continuously. We present the simple guidelines for some key design parameters such as the optimal capacity of the IES and the proper number of receivers. Note that we additionally present the sample IES circuit and the related circuit simulation to show the detailed operation and the feasibility of the proposed scheme.

  2. Transfer matrix modeling of a tensioned piezo-solar hybrid energy harvesting ribbon

    NASA Astrophysics Data System (ADS)

    Chatterjee, Punnag; Bryant, Matthew

    2015-04-01

    This paper proposes a multifunctional compliant structure that can harvest electrical power from both incident sunlight and ambient mechanical energy including wind flow or vibration. The energy harvesting device consists of a slender, ribbon-like, flexible thin film solar cell that is laminated with piezoelectric patches. The harvester is mounted in longitudinal tension and subjected to a transverse wind flow to excite flow-induced aeroelastic vibrations. This paper formulates an analytic model of the bending dynamics of the device. We present a Transfer Matrix formulation that also accounts for the changes in natural frequencies and mode shapes of the system when subjected to axial loads in a beam. It also observed that mode shape obtained using TMM formulation shows numerical stability even for very high tensile loads providing results consistent with the geometric boundary conditions applied at the ends of a beam. This article also discusses about structurally modeling a piezo - solar energy harvester using TMM methodology, where a thin clampedclamped solar film is bonded with piezo patches having a much higher bending stiffness. Additionally, the effect of axial tension on the mode shape of the thin host structure of the piezo-solar ribbon is presented and it is shown how this tension can be used advantageously to affect the strain distribution of the entire structure and introduce higher strains at the piezo patches.

  3. Non-pairwise additivity of the leading-order dispersion energy

    SciTech Connect

    Hollett, Joshua W.

    2015-02-28

    The leading-order (i.e., dipole-dipole) dispersion energy is calculated for one-dimensional (1D) and two-dimensional (2D) infinite lattices, and an infinite 1D array of infinitely long lines, of doubly occupied locally harmonic wells. The dispersion energy is decomposed into pairwise and non-pairwise additive components. By varying the force constant and separation of the wells, the non-pairwise additive contribution to the dispersion energy is shown to depend on the overlap of density between neighboring wells. As well separation is increased, the non-pairwise additivity of the dispersion energy decays. The different rates of decay for 1D and 2D lattices of wells is explained in terms of a Jacobian effect that influences the number of nearest neighbors. For an array of infinitely long lines of wells spaced 5 bohrs apart, and an inter-well spacing of 3 bohrs within a line, the non-pairwise additive component of the leading-order dispersion energy is −0.11 kJ mol{sup −1} well{sup −1}, which is 7% of the total. The polarizability of the wells and the density overlap between them are small in comparison to that of the atomic densities that arise from the molecular density partitioning used in post-density-functional theory (DFT) damped dispersion corrections, or DFT-D methods. Therefore, the nonadditivity of the leading-order dispersion observed here is a conservative estimate of that in molecular clusters.

  4. Development of flexible, free-standing, thin films for additive manufacturing and localized energy generation

    NASA Astrophysics Data System (ADS)

    Clark, Billy; McCollum, Jena; Pantoya, Michelle L.; Heaps, Ronald J.; Daniels, Michael A.

    2015-08-01

    Film energetics are becoming increasingly popular because a variety of technologies are driving a need for localized energy generation in a stable, safe and flexible form. Aluminum (Al) and molybdenum trioxide (MoO3) composites were mixed into a silicon binder and extruded using a blade casting technique to form flexible free-standing films ideal for localized energy generation. Since this material can be extruded onto a surface it is well suited to additive manufacturing applications. This study examines the influence of 0-35% by mass potassium perchlorate (KClO4) additive on the combustion behavior of these energetic films. Without KClO4 the film exhibits thermal instabilities that produce unsteady energy propagation upon reaction. All films were cast at a thickness of 1 mm with constant volume percent solids to ensure consistent rheological properties. The films were ignited and flame propagation was measured. The results show that as the mass percent KClO4 increased, the flame speed increased and peaked at 0.43 cm/s and 30 wt% KClO4. Thermochemical equilibrium simulations show that the heat of combustion increases with increasing KClO4 concentration up to a maximum at 20 wt% when the heat of combustion plateaus, indicating that the increased chemical energy liberated by the additional KClO4 promotes stable energy propagation. Differential scanning calorimeter and thermogravimetric analysis show that the silicone binder participates as a fuel and reacts with KClO4 adding energy to the reaction and promoting propagation.

  5. Development of flexible, free-standing, thin films for additive manufacturing and localized energy generation

    DOE PAGES

    Clark, Billy; McCollum, Jena; Pantoya, Michelle L.; Heaps, Ronald J.; Daniels, Michael A.

    2015-08-01

    Film energetics are becoming increasingly popular because a variety of technologies are driving a need for localized energy generation in a stable, safe and flexible form. Aluminum (Al) and molybdenum trioxide (MoO₃) composites were mixed into a silicon binder and extruded using a blade casting technique to form flexible free-standing films ideal for localized energy generation. Since this material can be extruded onto a surface it is well suited to additive manufacturing applications. This study examines the influence of 0-35% by mass potassium perchlorate (KClO₄) additive on the combustion behavior of these energetic films. Without KClO₄ the film exhibits thermalmore » instabilities that produce unsteady energy propagation upon reaction. All films were cast at a thickness of 1 mm with constant volume percent solids to ensure consistent rheological properties. The films were ignited and flame propagation was measured. The results show that as the mass percent KClO₄ increased, the flame speed increased and peaked at 0.43 cm/s and 30 wt% KClO₄. Thermochemical equilibrium simulations show that the heat of combustion increases with increasing KClO₄ concentration up to a maximum at 20 wt% when the heat of combustion plateaus, indicating that the increased chemical energy liberated by the additional KClO₄ promotes stable energy propagation. Differential scanning calorimeter and thermogravimetric analysis show that the silicone binder participates as a fuel and reacts with KClO₄ adding energy to the reaction and promoting propagation.« less

  6. Development of flexible, free-standing, thin films for additive manufacturing and localized energy generation

    SciTech Connect

    Clark, Billy; McCollum, Jena; Pantoya, Michelle L.; Heaps, Ronald J.; Daniels, Michael A.

    2015-08-15

    Film energetics are becoming increasingly popular because a variety of technologies are driving a need for localized energy generation in a stable, safe and flexible form. Aluminum (Al) and molybdenum trioxide (MoO{sub 3}) composites were mixed into a silicon binder and extruded using a blade casting technique to form flexible free-standing films ideal for localized energy generation. Since this material can be extruded onto a surface it is well suited to additive manufacturing applications. This study examines the influence of 0-35% by mass potassium perchlorate (KClO{sub 4}) additive on the combustion behavior of these energetic films. Without KClO{sub 4} the film exhibits thermal instabilities that produce unsteady energy propagation upon reaction. All films were cast at a thickness of 1 mm with constant volume percent solids to ensure consistent rheological properties. The films were ignited and flame propagation was measured. The results show that as the mass percent KClO{sub 4} increased, the flame speed increased and peaked at 0.43 cm/s and 30 wt% KClO{sub 4}. Thermochemical equilibrium simulations show that the heat of combustion increases with increasing KClO{sub 4} concentration up to a maximum at 20 wt% when the heat of combustion plateaus, indicating that the increased chemical energy liberated by the additional KClO{sub 4} promotes stable energy propagation. Differential scanning calorimeter and thermogravimetric analysis show that the silicone binder participates as a fuel and reacts with KClO{sub 4} adding energy to the reaction and promoting propagation.

  7. Time-Resolved Fluorescence Energy Transfer Measurements Between Site-Specific Probes On The Ca-Atpase Of Sarcoplasmic Reticulum In Different Enzymatic States

    NASA Astrophysics Data System (ADS)

    Squier, Thomas C.; Bigelow, Diana J.; Garcia de Ancos, Jorge; Bishop, James E.; Inesi, Giuseppe

    1988-06-01

    We have measured resonance energy transfer between two donor-acceptor pairs localized on different domains of the Ca-ATPase of sarcoplasmic reticulum in order to determine whether changes in tertiary structure accompany active calcium transport. Energy transfer was determined from both steady state intensities and time-resolved lifetimes of 5-(2-((acety1)- amino)ethyDaminonaphthalene-l-sulfonic acid (IAEDANS), specifically bound to the B tryptic fragment, using two acceptors: (1) fluorescein 5'-isothiocyanate (FITC), covalently bound at the nucleotide site, also on the B fragment, and (2) 4-dimethylaminophenylazopheny1-4'- maleimide (DABMI), bound on the Al subfragment. Neither binding of calcium to the high affinity sites nor phosphorylation by inorganic phosphate is accompanied by detectable changes in the distance between IAEDANS and FITC, suggesting that the B fragment does not undergo any large-scale (>1 A) physical distortion under these conditions. On the other hand, measurements of energy transfer from IAEDANS to the acceptor DABMI, on the Al subfragment, demonstrate that phosphorylation with inorganic phosphate or addition of pM VO4 results in increased energy transfer, that is reversible with subsequent addition of calcium. Addition of calcium to the nonphosphorylated enzyme results in no detectable change in energy transfer. The presence of the detergent lysolecithin prevents the phosphate dependent increase in fluorescence energy transfer, suggesting that protein-protein interactions may contribute to the observed change in energy transfer. A direct relationship between an increased degree of protein-protein interactions and phosphoenzyme formation is confirmed by investigations using a reconstituted preparation containing a mixed popu Lation of Ca-ATPase polypeptide chains labeled either with IAEDANS or with DABMI. These results suggest a phosphorylation dependent change in either the affinity or orientation of Ca-ATPase polypeptide chains with respect

  8. Quantum coherent energy transfer over varying pathways in single light-harvesting complexes.

    PubMed

    Hildner, Richard; Brinks, Daan; Nieder, Jana B; Cogdell, Richard J; van Hulst, Niek F

    2013-06-21

    The initial steps of photosynthesis comprise the absorption of sunlight by pigment-protein antenna complexes followed by rapid and highly efficient funneling of excitation energy to a reaction center. In these transport processes, signatures of unexpectedly long-lived coherences have emerged in two-dimensional ensemble spectra of various light-harvesting complexes. Here, we demonstrate ultrafast quantum coherent energy transfer within individual antenna complexes of a purple bacterium under physiological conditions. We find that quantum coherences between electronically coupled energy eigenstates persist at least 400 femtoseconds and that distinct energy-transfer pathways that change with time can be identified in each complex. Our data suggest that long-lived quantum coherence renders energy transfer in photosynthetic systems robust in the presence of disorder, which is a prerequisite for efficient light harvesting.

  9. Mid-range adiabatic wireless energy transfer via a mediator coil

    SciTech Connect

    Rangelov, A.A. Vitanov, N.V.

    2012-09-15

    A technique for efficient mid-range wireless energy transfer between two coils via a mediator coil is proposed. By varying the coil frequencies, three resonances are created: emitter-mediator (EM), mediator-receiver (MR) and emitter-receiver (ER). If the frequency sweeps are adiabatic and such that the EM resonance precedes the MR resonance, the energy flows sequentially along the chain emitter-mediator-receiver. If the MR resonance precedes the EM resonance, then the energy flows directly from the emitter to the receiver via the ER resonance; then the losses from the mediator are suppressed. This technique is robust against noise, resonant constraints and external interferences. - Highlights: Black-Right-Pointing-Pointer Efficient and robust mid-range wireless energy transfer via a mediator coil. Black-Right-Pointing-Pointer The adiabatic energy transfer is analogous to adiabatic passage in quantum optics. Black-Right-Pointing-Pointer Wireless energy transfer is insensitive to any resonant constraints. Black-Right-Pointing-Pointer Wireless energy transfer is insensitive to noise in the neighborhood of the coils.

  10. New model of calculating the energy transfer efficiency for the spherical theta-pinch device

    SciTech Connect

    Xu, G.; Hock, C.; Loisch, G.; Jacoby, J.; Xiao, G.; Zhao, Y.; Weyrich, K.; Li, Y.

    2015-05-15

    Ion-beam-plasma-interaction plays an important role in the field of warm dense matter and inertial confinement fusion. A spherical theta pinch is proposed to act as a plasma target in various applications including a plasma stripper cell. One key parameter for such applications is the free electron density. A linear dependency of this density to the amount of energy transferred into the plasma from an energy storage was found by Teske. Since the amount of stored energy is known, the energy transfer efficiency is a reliable parameter for the design of a spherical theta pinch device. As the main assumption of a constant reflected plasma resistance is contradictory by the measured data, the traditional two models of energy transfer efficiency will lead to wrong results. From measurements, the parasitic resistance is derived as constant. Based on this key parameter, a new model is proposed. Due to no assumption, the new model is considered as exact. Further, a comparison of these three different models is given at a fixed operation voltage for the full range of working gas pressures. Due to the inappropriate assumptions included in the traditional models, one owns a tendency to overestimate the energy transfer efficiency whereas the other leads to an underestimation. Applying our new model to a wide spread set of operation voltages and gas pressures, an overall picture of the energy transfer efficiency results.

  11. Methanol Oxidative Dehydrogenation on Oxide Catalysts: Molecular and Dissociative Routes and Hydrogen Addition Energies as Descriptors of Reactivity

    SciTech Connect

    Deshlahra, Prashant; Iglesia, Enrique

    2014-11-13

    The oxidative dehydrogenation (ODH) of alkanols on oxide catalysts is generally described as involving H-abstraction from alkoxy species formed via O–H dissociation. Kinetic and isotopic data cannot discern between such routes and those involving kinetically-relevant H-abstraction from undissociated alkanols. Here, we combine such experiments with theoretical estimates of activation energies and entropies to show that the latter molecular routes prevail over dissociative routes for methanol reactions on polyoxometalate (POM) clusters at all practical reaction temperatures. The stability of the late transition states that mediate H-abstraction depend predominantly on the stability of the O–H bond formed, making H-addition energies (HAE) accurate and single-valued descriptors of reactivity. Density functional theory-derived activation energies depend linearly on HAE values at each O-atom location on clusters with a range of composition (H3PMo12, H4SiMo12, H3PW12, H4PV1Mo11, and H4PV1W11); both barriers and HAE values reflect the lowest unoccupied molecular orbital energy of metal centers that accept the electron and the protonation energy of O-atoms that accept the proton involved in the H-atom transfer. Bridging O-atoms form O–H bonds that are stronger than those of terminal atoms and therefore exhibit more negative HAE values and higher ODH reactivity on all POM clusters. For each cluster composition, ODH turnover rates reflect the reactivity-averaged HAE of all accessible O-atoms, which can be evaluated for each cluster composition to provide a rigorous and accurate predictor of ODH reactivity for catalysts with known structure. These relations together with oxidation reactivity measurements can then be used to estimate HAE values and to infer plausible structures for catalysts with uncertain active site structures.

  12. Modeling of energy transfer between two crossing smoothed laser beams in a plasma with flow profile

    NASA Astrophysics Data System (ADS)

    Colaitis, A.; Hüller, S.; Tikhonchuk, V. T.; Pesme, D.; Duchateau, G.; Porzio, A.

    2016-05-01

    We study the crossed beam energy transfer (CBET) between laser fields generated by optical smoothing methods. The energy transfer, as well as the angular distribution of the outgoing light fields are investigated for two incident smoothed laser beams in a plasma with a flow gradient, allowing for resonant transfer close to the sonic point. Simulations with the code HARMONY based on time-dependent paraxial light propagation are compared to simulations using a new approach based on paraxial complex geometrical optics (PCGO). Both approaches show good agreement for the average energy transfer past a short transient period, which is a promising result for the use of the PCGO method as a module within a hydrodynamics code to efficiently compute CBET in mm-scale plasma configurations. Statistical aspects related to role of laser speckles in CBET are considered via an ensemble of different phase plate realizations.

  13. Local intermodal energy transfer of the secondary instability in a plane channel

    NASA Technical Reports Server (NTRS)

    Singer, Bart A.; Ferziger, Joel H.; Spalart, Philippe R.; Reed, Helen L.

    1987-01-01

    A mathematical technique for analyzing local energy-transfer rates among wave-vector triads is developed and applied to the data generated by direct numerical simulations of waves with various types of initial conditions. Starting the simulation with a primary two-dimensional wave and random noise produced structures very similar to those which evolved from three-dimensional center modes. The local transfer rates determined in this case help to explain the eventual deformation of the primary two-dimensional wave which was observed in wind-tunnel experiments. Including weak streamwise vortices in the initial flow field results in large amounts of energy being transferred to the K-type modes early in the simulation. The later development of the waves (and hence the energy-transfer rates) is similar to the previous case.

  14. Non-contact pumping of light emitters via non-radiative energy transfer

    DOEpatents

    Klimov, Victor I.; Achermann, Marc

    2010-01-05

    A light emitting device is disclosed including a primary light source having a defined emission photon energy output, and, a light emitting material situated near to said primary light source, said light emitting material having an absorption onset equal to or less in photon energy than the emission photon energy output of the primary light source whereby non-radiative energy transfer from said primary light source to said light emitting material can occur yielding light emission from said light emitting material.

  15. Methods and energy storage devices utilizing electrolytes having surface-smoothing additives

    SciTech Connect

    Xu, Wu; Zhang, Jiguang; Graff, Gordon L; Chen, Xilin; Ding, Fei

    2015-11-12

    Electrodeposition and energy storage devices utilizing an electrolyte having a surface-smoothing additive can result in self-healing, instead of self-amplification, of initial protuberant tips that give rise to roughness and/or dendrite formation on the substrate and anode surface. For electrodeposition of a first metal (M1) on a substrate or anode from one or more cations of M1 in an electrolyte solution, the electrolyte solution is characterized by a surface-smoothing additive containing cations of a second metal (M2), wherein cations of M2 have an effective electrochemical reduction potential in the solution lower than that of the cations of M1.

  16. Passive broadband targeted energy transfers and control of self-excited vibrations

    NASA Astrophysics Data System (ADS)

    Lee, Young S.

    This work consists of the three main parts---Nonlinear energy pumping (that is, passive broadband targeted energy transfers---TETs), and its applications to theoretical and experimental suppression of aeroelastic instabilities. In the first part, nonlinear energy pumping (or TETs) in coupled oscillators is studied. The system is composed of a primary linear subsystem coupled through an essentially nonlinear stiffness and a linear viscous damper to an additional mass (which is called, as a whole, a nonlinear energy sink---NES). By considering the linear damping as a perturbation to the system, periodic solutions of the underlying Hamiltonian system are formulated by means of the non-smooth temporal transformation and solved numerically by a shooting method. The special periodic orbits, which are corresponding to the impulsive initial conditions for the primary subsystem, bear their importance as baits for initiating localized transfers of a significant portion of energy to the NES. The second part theoretically deals with suppression of limit cycle oscillations (LCOs) in self-excited systems by means of passive energy localizations. As a pilot scheme, suppression or even complete elimination of the LCO in a van der Pol (VDP) oscillator coupled with two types of NESS---grounded and ungrounded---is studied. Computational parametric study proves the efficacy of LCO elimination by means of passive nonlinear energy pumping from the VDP oscillator to appropriately designed NESs. The numerical study of the transient dynamics of the system showed that the dynamical mechanism for LCO suppression is a series of 1:1 and 1:3 transient resonance captures, with the damped transient dynamics following closely corresponding resonant manifolds of the underlying Hamiltonian system. It is through the TRCs that energy gets transferred from the VDP oscillator to the NES, thus causing LCO suppression. By performing an additional bifurcation analysis of the steady state responses through

  17. Definition and determination of the triplet-triplet energy transfer reaction coordinate.

    PubMed

    Zapata, Felipe; Marazzi, Marco; Castaño, Obis; Acuña, A Ulises; Frutos, Luis Manuel

    2014-01-21

    A definition of the triplet-triplet energy transfer reaction coordinate within the very weak electronic coupling limit is proposed, and a novel theoretical formalism is developed for its quantitative determination in terms of internal coordinates The present formalism permits (i) the separation of donor and acceptor contributions to the reaction coordinate, (ii) the identification of the intrinsic role of donor and acceptor in the triplet energy transfer process, and (iii) the quantification of the effect of every internal coordinate on the transfer process. This formalism is general and can be applied to classical as well as to nonvertical triplet energy transfer processes. The utility of the novel formalism is demonstrated here by its application to the paradigm of nonvertical triplet-triplet energy transfer involving cis-stilbene as acceptor molecule. In this way the effect of each internal molecular coordinate in promoting the transfer rate, from triplet donors in the low and high-energy limit, could be analyzed in detail. PMID:25669358

  18. Large cross section for super energy transfer from hyperthermal atoms to ambient molecules

    NASA Astrophysics Data System (ADS)

    Ma, Jianqiang; Wilhelm, Michael J.; Smith, Jonathan M.; Dai, Hai-Lung

    2016-04-01

    The experimentally measured cross section for super energy transfer collisions between a hyperthermal H atom and an ambient molecule is presented here. This measurement substantiates an emerging energy transfer mechanism with significant cross section, whereby a major fraction of atomic translational energy is converted into molecular vibrational energy through a transient collision-induced reactive complex. Specifically, using nanosecond time-resolved infrared emission spectroscopy, it is revealed that collisions between hyperthermal hydrogen atoms (with 59 kcal/mol of kinetic energy) and ambient SO2 result in the production of vibrationally highly excited SO2 with >14 000 cm-1 of internal energy. The lower limit of the cross section for this super energy transfer process is determined to be 0.53 ±0.05 Å2, i.e., 2% of all hard-sphere collisions. This cross section is orders of magnitude greater than that predicted by the exponential energy gap law, which is commonly used for describing collisional energy transfer through repulsive interactions.

  19. Experimental Study of RF Energy Transfer System in Indoor Environment

    NASA Astrophysics Data System (ADS)

    Adami, S.-E.; Proynov, P. P.; Stark, B. H.; Hilton, G. S.; Craddock, I. J.

    2014-11-01

    This paper presents a multi-transmitter, 2.43 GHz Radio-Frequency (RF) wireless power transfer (WPT) system for powering on-body devices. It is shown that under typical indoor conditions, the received power range spans several orders of magnitude from microwatts to milliwatts. A body-worn dual-polarised rectenna (rectifying antenna) is presented, designed for situations where the dominant polarization is unpredictable, as is the case for the on-body sensors. Power management circuitry is demonstrated that optimally loads the rectenna even under highly intermittent conditions, and boosts the voltage to charge an on-board storage capacitor.

  20. Radiative and nonradiative exciton energy transfer in monolayers of two-dimensional group-VI transition metal dichalcogenides

    NASA Astrophysics Data System (ADS)

    Manolatou, Christina; Wang, Haining; Chan, Weimin; Tiwari, Sandip; Rana, Farhan

    2016-04-01

    We present results on the rates of interlayer energy transfer between excitons in monolayers of two-dimensional group-VI transition metal dichalcogenides (TMDs). We consider both radiative (mediated by real photons) and nonradiative (mediated by virtual photons) mechanisms of energy transfer using a unified Green's function approach that takes into account modification of the exciton energy dispersions as a result of interactions. The large optical oscillator strengths associated with excitons in TMDs result in very fast energy transfer rates. The energy transfer times depend on the exciton momentum, exciton linewidth, and the interlayer separation and can range from values less than 100 femtoseconds to more than tens of picoseconds. Whereas inside the light cone the energy transfer rates of longitudinal and transverse excitons are comparable, outside the light cone the energy transfer rates of longitudinal excitons far exceed those of transverse excitons. Average energy transfer times for a thermal ensemble of longitudinal and transverse excitons is temperature dependent and can be smaller than a picosecond at room temperature for interlayer separations smaller than 10 nm. Energy transfer times of localized excitons range from values less than a picosecond to several tens of picoseconds. When the exciton scattering and dephasing rates are small, energy transfer dynamics exhibit coherent oscillations. Our results show that electromagnetic interlayer energy transfer can be an efficient mechanism for energy exchange between TMD monolayers.