Science.gov

Sample records for addition experimental results

  1. SAA drift: Experimental results

    NASA Astrophysics Data System (ADS)

    Grigoryan, O. R.; Romashova, V. V.; Petrov, A. N.

    According to the paleomagnetic analysis there are variations of Earth’s magnetic field connected with magnetic moment changing. These variations affect on the South Atlantic Anomaly (SAA) location. Indeed different observations approved the existence of the SAA westward drift rate (0.1 1.0 deg/year) and northward drift rate (approximately 0.1 deg/year). In this work, we present the analysis of experimental results obtained in Scobeltsyn Institute of Nuclear Physics, Moscow State University (SINP MSU) onboard different Earth’s artificial satellites (1972 2003). The fluxes of protons with energy >50 MeV, gamma quanta with energy >500 keV and neutrons with energy 0.1 1.0 MeV in the SAA region have been analyzed. The mentioned above experimental data were obtained onboard the orbital stations Salut-6 (1979), MIR (1991, 1998) and ISS (2003) by the similar experimental equipment. The comparison of the data obtained during these two decades of investigations confirms the fact that the SAA drifts westward. Moreover the analysis of fluxes of electrons with energy about hundreds keV (Cosmos-484 (1972) and Active (Interkosmos-24, 1991) satellites) verified not only the SAA westward drift but northward drift also.

  2. PDX experimental results

    SciTech Connect

    Meade, D.; Arunasalam, V.; Barnes, C.

    1981-01-01

    The main objectives of the Poloidal Divertor Experiment (PDX) are to: (1) determine the effectiveness of poloidal divertors in controlling impurities in high temperature plasmas, (2) use the poloidal divertor to provide clean plasmas for confinement and high beta studies, and (3) investigate the effect of cross-section shaping on plasma confinement and MHD properties. In this paper, we report the results obtained during initial divertor operation of the PDX.

  3. Theoretical and experimental investigation of additive drag

    NASA Technical Reports Server (NTRS)

    Sibulkin, Merwin

    1954-01-01

    The significance of additive drag is discussed and equations for determining its approximate value are derived for annular and open-nose inlets. Charts are presented giving values of additive drag coefficient over a range of free-stream Mach numbers for open and for annular-nose inlets with conical flow at the inlet. The effects on additive drag of variable inlet-total-pressure recovery and static pressures on the centerbody are investigated and an analytical method of predicting the variation of pressure on the centerbody with mass-flow ratio is given. Experimental additive-drag values are presented for a series of 20 degree and 25 degree cone half-angle inlets and one open-nose inlet operating at free-stream Mach numbers of 1.8 and 1.6. A comparison with the theoretical values of additive drag shows excellent agreement for the open-nose inlet and moderately good agreement for the annular inlets. (author)

  4. SAA drift:experimental results

    NASA Astrophysics Data System (ADS)

    Grigoryan, O. R.; Kudela, K.; Romashova, V. V.; Drozdov, A. Yu.

    According to the paleomagnetic analysis there are variations of Earth's magnetic field connected with magnetic momentum changing. Besides these variations affects on the trapped belt South Atlantic Anomaly (SAA) location. Indeed different observations including Space Shuttle short-time flights approved the existence SAA westward drift with speed 0.1-1.0 (deg/year) and northward drift with speed approximately 0.1 (deg/year). In this work we present the analysis of experimental results obtained in SINP MSU in 1972-2003 from different satellites. There were analyzed the fluxes of protons with energy > 50 MeV, gamma quanta with energy > 500 keV and neutrons with energy 0.1-1.0 MeV in SAA area and their maxima location. The data about fluxes were obtained onboard the orbital stations ``Salut-6'' (1979), MIR (1991, 1998) and ISS (2003) by the identical experimental equipment. The comparison of the data obtained during these two decades of investigations confirms the fact of the SAA westward drift. Moreover the same analysis of maximum flux location of electrons with hundreds keV energy (satellites ``Kosmos-484'' (1972), ``Interkosmos-17'' (1977) and ``Activny'' (``Interkosmos-24'', 1991)) confirmed not only the SAA westward drift but northward drift also.

  5. Majorana Thermosyphon Prototype Experimental Results

    SciTech Connect

    Fast, James E.; Reid, Douglas J.; Aguayo Navarrete, Estanislao

    2010-12-17

    Objective The Majorana demonstrator will operate at liquid Nitrogen temperatures to ensure optimal spectrometric performance of its High Purity Germanium (HPGe) detector modules. In order to transfer the heat load of the detector module, the Majorana demonstrator requires a cooling system that will maintain a stable liquid nitrogen temperature. This cooling system is required to transport the heat from the detector chamber outside the shield. One approach is to use the two phase liquid-gas equilibrium to ensure constant temperature. This cooling technique is used in a thermosyphon. The thermosyphon can be designed so the vaporization/condensing process transfers heat through the shield while maintaining a stable operating temperature. A prototype of such system has been built at PNNL. This document presents the experimental results of the prototype and evaluates the heat transfer performance of the system. The cool down time, temperature gradient in the thermosyphon, and heat transfer analysis are studied in this document with different heat load applied to the prototype.

  6. Pentaquarks: the latest experimental results

    SciTech Connect

    M. Battaglieri; R. De Vita; Valery Kubarovsky

    2006-01-01

    After the claim of the possible discovery of a pentaquark state, many experiments reported positive and negative results opening a discussion about the pentaquark existence. New experiments with high resolution and high statistics are needed in the reaction channels and for the kinematics of the positive results to solve the controversy. Jefferson Lab started a comprehensive program to search for pentaquark in photoproduction at threshold on proton and deuteron targets, collecting more than 10 times the existing statistics. The first experiment on the proton (g11) just finished to analyze the data, and the first results of the pentaquark search are reported here.

  7. A Simple Experimental Setup for Teaching Additive Colors with Arduino

    NASA Astrophysics Data System (ADS)

    Carvalho, Paulo Simeão; Hahn, Marcelo

    2016-04-01

    The result of additive colors is always fascinating to young students. When we teach this topic to 14- to 16-year-old students, they do not usually notice we use maximum light quantities of red (R), green (G), and blue (B) to obtain yellow, magenta, and cyan colors in order to build the well-known additive color diagram of Fig. 1. But how about using different light intensities for R, G, and B? What colors do we get? This problem of color mixing has been intensively discussed for decades by several authors, as pointed out by Ruiz's "Color Addition and Subtraction Apps" work and the references included therein. An early LED demonstrator for additive color mixing dates back to 1985, and apps to illustrate color mixing are available online. In this work, we describe an experimental setup making use of a microcontroller device: the Arduino Uno. This setup is designed as a game in order to improve students' understanding of color mixing.

  8. Experimental Study of Additives on Viscosity biodiesel at Low Temperature

    NASA Astrophysics Data System (ADS)

    Fajar, Berkah; Sukarno

    2015-09-01

    An experimental investigation was performed to find out the viscosity of additive and biodiesel fuel mixture in the temperature range from 283 K to 318 K. Solutions to reduce the viscosity of biodiesel is to add the biodiesel with some additive. The viscosity was measured using a Brookfield Rheometer DV-II. The additives were the generic additive (Diethyl Ether/DDE) and the commercial additive Viscoplex 10-330 CFI. Each biodiesel blends had a concentration of the mixture: 0.0; 0.25; 0.5; 0.75; 1.0; and 1.25% vol. Temperature of biodiesel was controlled from 40°C to 0°C. The viscosity of biodiesel and additive mixture at a constant temperature can be approximated by a polynomial equation and at a constant concentration by exponential equation. The optimum mixture is at 0.75% for diethyl ether and 0.5% for viscoplex.

  9. Selectivity and the production of experimental results.

    NASA Astrophysics Data System (ADS)

    Franklin, A.

    1998-12-01

    The author studies possible relations between the application of selection criteria in analyzing and interpreting the results of physical experiments and the mental preconceptions and expectations of the experimenters. He presents a detailed account of five famous cases of purported experimental results and the controversies following their publication. These cases include Joseph Weber's 1969 claim to have detected gravitational radiation - possibly originating in the center of the Milky Way, and the controversy arising from the 1985 "detection" of the 17 keV (heavy) neutrino by Simpson. Extensive bibliographical references are given for each case.

  10. A Simple Experimental Setup for Teaching Additive Colors with Arduino

    ERIC Educational Resources Information Center

    Carvalho, Paulo Simeão; Hahn, Marcelo

    2016-01-01

    The result of additive colors is always fascinating to young students. When we teach this topic to 14- to 16-year-old students, they do not usually notice we use maximum light quantities of red (R), green (G), and blue (B) to obtain yellow, magenta, and cyan colors in order to build the well-known additive color diagram of Fig. 1. But how about…

  11. Experimental Results in DIS from Jefferson Laboratory

    SciTech Connect

    Sebastian Kuhn

    2009-10-01

    We are summarizing the experimental program of Jefferson Lab (Thomas Jefferson National Accelerator Facility in Newport News, VA) in deep inelastic electron scattering. We show recent results and discuss future plans for both the present 6 GeV era and the 12 GeV energy-upgraded facility.

  12. Microwave radiometry for humanitarian demining: experimental results

    NASA Astrophysics Data System (ADS)

    Johnson, Joel T.; Kim, Hyunjin; Wiggins, David R.; Cheon, Yonghun

    2002-08-01

    Previous modeling studies have indicated that a multi-frequency radiometer could prove advantageous for humanitarian demining due to the oscillatory patterns in brightness temperature versus frequency that would be observed in the presence of a sub-surface target. Initial experimental results are reported in this paper from a multi-frequency radiometer (MFRAD) system operating at 19 frequencies in the 2.1-6.5 GHz band. The basic design of MFRAD is reviewed, and the calibration and noise background removal procedures discussed. Experimental results with sub-surface metallic and styrofoam targets are then provided that demonstrate the predicted oscillatory behavior. An FFT-based detection algorithm is also described and applied to measured data. Further plans for experiments and tests with this system are also detailed.

  13. PDX experimental results in FY82

    SciTech Connect

    Kaye, S.M.; Bell, M.; Bol, K.; Bitter, M.; Buchenauer, D.; Budny, R.; Brau, K.; Crowley, T.; Davis, S.; Dylla, H.

    1983-08-01

    This report presents a detailed summary of the major experimental results of PDX in FY82 and represents the efforts of the entire PDX group. Topics covered include ..beta..-scaling and fishbone studies, fluctuations, disruptions, impurities and impurity transport, power handling, limiter conditioning, edge studies, plasma fueling, counter-injection, and diagnostic development. A less detailed version will appear as the FY82 PDX contribution to the PPPL Annual Report.

  14. Experimental Results for Space-Wire-D

    NASA Astrophysics Data System (ADS)

    Parkes, Steve; Gibson, David; Ferrer, Albert

    2015-09-01

    SpaceWire-D is a deterministic extension to SpaceWire that uses time-division multiplexing to schedule traffic within time-slots. It allows a single SpaceWire network to be used for both time-critical avionics control applications and asynchronous payload data-handling simultaneously using existing SpaceWire technology. In this paper we describe the services of SpaceWire-D and present experimental results for each service.

  15. Fuel-rich, catalytic reaction experimental results

    NASA Technical Reports Server (NTRS)

    Rollbuhler, R. James

    1991-01-01

    Future aeropropulsion gas turbine combustion requirements call for operating at very high inlet temperatures, pressures, and large temperature rises. At the same time, the combustion process is to have minimum pollution effects on the environment. Aircraft gas turbine engines utilize liquid hydrocarbon fuels which are difficult to uniformly atomize and mix with combustion air. An approach for minimizing fuel related problems is to transform the liquid fuel into gaseous form prior to the completion of the combustion process. Experimentally obtained results are presented for vaporizing and partially oxidizing a liquid hydrocarbon fuel into burnable gaseous components. The presented experimental data show that 1200 to 1300 K reaction product gas, rich in hydrogen, carbon monoxide, and light-end hydrocarbons, is formed when flowing 0.3 to 0.6 fuel to air mixes through a catalyst reactor. The reaction temperatures are kept low enough that nitrogen oxides and carbon particles (soot) do not form. Results are reported for tests using different catalyst types and configurations, mass flowrates, input temperatures, and fuel to air ratios.

  16. Experimental results from the TFTR tokamak

    SciTech Connect

    Hawryluk, R.J.; Arunasalam, V.; Bell, J.D.; Bell, M.G.; Bitter, M.; Blanchard, W.R.; Bloody, F.; Bretz, N.; Budny, R.; Bush, C.E.

    1986-10-01

    Recent experiments on TFTR have extended the operating regime of TFTR in both ohmic- and neutral-beam-heated discharges. The TFTR tokamak has reached its original machine design specifications (I/sub p/ = 2.5 MA and B/sub T/ = 5.2 T). Initial neutral-beam-heating experiments used up to 6.3 MW of deuterium beams. With the recent installation of two additional beamlines, the power has been increased up to 11 MW. A deuterium pellet injector was used to increase the central density to 2.5 x 10/sup 20/ m/sup -3/ in high current discharges. At the opposite extreme, by operating at low plasma current (I/sub p/ approx. 0.8 MA) and low density (anti n/sub e/ approx. 1 x 10/sup 19/ m/sup -3/), high ion temperatures (9 +- 2 keV) and rotation speeds (7 x 10/sup 5/ m/s) have been achieved during injection. In addition, plasma compression experiments have demonstrated acceleration of beam ions from 82 keV to 150 keV, in accord with expectations. The wide operating range of TFTR, together with an extensive set of diagnostics and a flexible control system, has facilitated transport and scaling studies of both ohmic- and neutral-beam-heated discharges. The results of these confinement studies are presented.

  17. Nulling interferometry: symmetry requirements and experimental results

    NASA Astrophysics Data System (ADS)

    Serabyn, Eugene

    2000-07-01

    This paper provides a derivation from first principles of the stringent symmetry and stability requirements which deep stellar nulling demands, and also includes a brief status report on recent nulling results obtained with the Jet Propulsion Laboratory's fiber-coupled rotational-shearing interferometer. To date, the deepest transient nulls obtained (at red wavelengths) are 2 X 10-6 with a laser diode source, and 1.4 X 10-5 with a single- polarization thermal white-light source filtered to provide an 18% passband. In addition, both the laser and white light nulls have been stabilized to the 10-4 level. This visible wavelength laboratory nuller thus meets essentially all of the performance goals for the planned nulling experiment on board NASA's Space Interferometer Mission, with the sole exception of dual-polarization operation.

  18. Superspreading: molecular dynamics simulations and experimental results

    NASA Astrophysics Data System (ADS)

    Theodorakis, Panagiotis; Kovalchuk, Nina; Starov, Victor; Muller, Erich; Craster, Richard; Matar, Omar

    2015-11-01

    The intriguing ability of certain surfactant molecules to drive the superspreading of liquids to complete wetting on hydrophobic substrates is central to numerous applications that range from coating flow technology to enhanced oil recovery. Recently, we have observed that for superspreading to occur, two key conditions must be simultaneously satisfied: the adsorption of surfactants from the liquid-vapor surface onto the three-phase contact line augmented by local bilayer formation. Crucially, this must be coordinated with the rapid replenishment of liquid-vapor and solid-liquid interfaces with surfactants from the interior of the droplet. Here, we present the structural characteristics and kinetics of the droplet spreading during the different stages of this process, and we compare our results with experimental data for trisiloxane and poly oxy ethylene surfactants. In this way, we highlight and explore the differences between surfactants, paving the way for the design of molecular architectures tailored specifically for applications that rely on the control of wetting. EPSRC Platform Grant MACIPh (EP/L020564/).

  19. An overview of STAR experimental results

    NASA Astrophysics Data System (ADS)

    Xu, Nu

    2014-11-01

    With large acceptance and excellent particle identification, STAR is one of the best mid-rapidity collider experiments for studying high-energy nuclear collisions. The STAR experiment provides full information on initial conditions, properties of the hot and dense medium as well as the properties at freeze-out. In Au+Au collisions at √{sNN} = 200 GeV, STAR's focus is on the nature of the sQGP produced at RHIC. In order to explore the properties of the QCD phase diagram, since 2010, the experiment has collected sizable data sets of Au+Au collisions at the lower collision energy region where the net-baryon density is large. At the 2014 Quark Matter Conference, the STAR experiment made 16 presentations that cover physics topics including collective dynamics, electromagnetic probes, heavy-flavor, initial state physics, jets, QCD phase diagram, thermodynamics and hadron chemistry, and future experimental facilities, upgrades, and instrumentation[1]. In this overview we will highlight a few results from the STAR experiment, especially those from the recent measurements of the RHIC beam energy scan program. At the end, instead of a summary, we will discuss STAR's near future physics programs at RHIC.

  20. VALIDATION DATA FOR PHOTOCHEMICAL MECHANISMS: EXPERIMENTAL RESULTS

    EPA Science Inventory

    The smog chamber facility of the University of North Carolina (UNC) was used to provide experimental data for the EPA and atmospheric model developers for testing and validating kinetic mechanisms of photochemical smog formation. In the study, 71 dual-experiments were performed u...

  1. Mars-GRAM 2010: Additions and Resulting Improvements

    NASA Technical Reports Server (NTRS)

    Justh, Hilary L.; Burns, K. Lee

    2013-01-01

    factors. The adjustment factors generated by this process had to satisfy the gas law as well as the hydrostatic relation and are expressed as a function of height (z), Latitude (Lat) and areocentric solar longitude (Ls). The greatest adjustments are made at large optical depths such as tau greater than 1. The addition of the adjustment factors has led to better correspondence to TES Limb data from 0-60 km altitude as well as better agreement with MGS, ODY and MRO data at approximately 90-130 km altitude. Improved Mars-GRAM atmospheric simulations for various locations, times and dust conditions on Mars will be presented at the workshop session. The latest results validating Mars-GRAM 2010 versus Mars Climate Sounder data will also be presented. Mars-GRAM 2010 updates have resulted in improved atmospheric simulations which will be very important when beginning systems design, performance analysis, and operations planning for future aerocapture, aerobraking or landed missions to Mars.

  2. Additional Results of Ice-Accretion Scaling at SLD Conditions

    NASA Technical Reports Server (NTRS)

    Bond, Thomas H. (Technical Monitor); Anderson, David N.; Tsao, Jen-Ching

    2005-01-01

    To determine scale velocity an additional similarity parameter is needed to supplement the Ruff scaling method. A Weber number based on water droplet MVD has been included in several studies because the effect of droplet splashing on ice accretion was believed to be important, particularly for SLD conditions. In the present study, ice shapes recorded at Appendix-C conditions and recent results at SLD conditions are reviewed to show that droplet diameter cannot be important to main ice shape, and for low airspeeds splashing does not appear to affect SLD ice shapes. Evidence is presented to show that while a supplementary similarity parameter probably has the form of a Weber number, it must be based on a length proportional to model size rather than MVD. Scaling comparisons were made between SLD reference conditions and Appendix-C scale conditions using this Weber number. Scale-to-reference model size ratios were 1:1.7 and 1:3.4. The reference tests used a 91-cm-chord NACA 0012 model with a velocity of approximately 50 m/s and an MVD of 160 m. Freezing fractions of 0.3, 0.4, and 0.5 were included in the study.

  3. Experimental results of the betatron sum resonance

    SciTech Connect

    Wang, Y.; Ball, M.; Brabson, B.

    1993-06-01

    The experimental observations of motion near the betatron sum resonance, {nu}{sub x} + 2{nu}{sub z} = 13, are presented. A fast quadrupole (Panofsky-style ferrite picture-frame magnet with a pulsed power supplier) producing a betatron tune shift of the order of 0.03 at rise time of 1 {mu}s was used. This quadrupole was used to produce betatron tunes which jumped past and then crossed back through a betatron sum resonance line. The beam response as function of initial betatron amplitudes were recorded turn by turn. The correlated growth of the action variables, J{sub x} and J{sub z}, was observed. The phase space plots in the resonance frame reveal the features of particle motion near the nonlinear sum resonance region.

  4. Experimental rotordynamic coefficient results for honeycomb seals

    NASA Technical Reports Server (NTRS)

    Elrod, David A.; Childs, Dara W.

    1988-01-01

    Test results (leakage and rotordynamic coefficients) are presented for seven honeycomb-stator smooth-rotor seals. Tests were carried out with air at rotor speeds up to 16,000 cpm and supply pressures up to 8.2 bars. Test results for the seven seals are compared, and the most stable configuration is identified based on the whirl frequency ratio. Results from tests of a smooth-rotor/smooth-stator seal, a teeth-on-stator labyrinth seal, and the most stable honeycomb seal are compared.

  5. Adaptive structures - Test hardware and experimental results

    NASA Technical Reports Server (NTRS)

    Wada, Ben K.; Fanson, James L.; Chen, Gun-Shing; Kuo, Chin-Po

    1990-01-01

    The facilities and procedures used at JPL to test adaptive structures such as the large deployable reflector (LDR) are described and preliminary results are reported. The applications of adaptive structures in future NASA missions are outlined, and the techniques which are employed to modify damping, stiffness, and isolation characteristics, as well as geometric changes, are listed. The development of adaptive structures is shown to be effective as a result of new actuators and sensors, and examples are listed for categories such as fiber optics, shape-memory materials, piezoelectrics, and electrorheological fluids. Some ground test results are described for laboratory truss structures and truss test beds, which are shown to be efficient and easy to assemble in space. Adaptive structures are shown to be important for precision space structures such as the LDR, and can alleviate ground test requirements.

  6. The Humanoid Robot LOLA—Experimental Results

    NASA Astrophysics Data System (ADS)

    Favot, V.; Schwienbacher, M.; Buschmann, T.; Lohmeier, S.; Ulbrich, H.

    2010-09-01

    With the experience gathered during the development and construnction of the robot JOHNNIE, a new humanoid robot LOLA was built. Goal of this project is to realize a fast, human-like walking. Different aspects of this complex mechatronic system and the first experiments results are presented. The lightweight construction and the custom build multi-sensory joint drives with high torque brushless motors are introduced. The new decentralized electronic control/sensing network is also discuss as well as the simulation environment, the trajectory planning algorithm and the stabilizing walking control. Finally the first experiments result are presented.

  7. Experimental results on the enhanced backscatter phenomenon and its dynamics

    NASA Astrophysics Data System (ADS)

    Wu, Chensheng; Nelson, William; Ko, Jonathan; Davis, Christopher C.

    2014-10-01

    Enhanced backscatter effects have long been predicted theoretically and experimentally demonstrated. The reciprocity of a turbulent channel generates a group of paired rays with identical trajectory and phase information that leads to a region in phase space with double intensity and scintillation index. Though simulation work based on phase screen models has demonstrated the existence of the phenomenon, few experimental results have been published describing its characteristics, and possible applications of the enhanced backscatter phenomenon are still unclear. With the development of commercially available high powered lasers and advanced cameras with high frame rates, we have successfully captured the enhanced backscatter effects from different reflection surfaces. In addition to static observations, we have also tilted and pre-distorted the transmitted beam at various frequencies to track the dynamic properties of the enhanced backscatter phenomenon to verify its possible application in guidance and beam and image correction through atmospheric turbulence. In this paper, experimental results will be described, and discussions on the principle and applications of the phenomenon will be included. Enhanced backscatter effects are best observed in certain levels of turbulence (Cn 2≍10-13 m-2/3), and show significant potential for providing self-guidance in beam correction that doesn't introduce additional costs (unlike providing a beacon laser). Possible applications of this phenomenon include tracking fast moving object with lasers, long distance (>1km) alignment, and focusing a high-power corrected laser beam over long distances.

  8. Numerical taxonomy on data: Experimental results

    SciTech Connect

    Cohen, J.; Farach, M.

    1997-12-01

    The numerical taxonomy problems associated with most of the optimization criteria described above are NP - hard [3, 5, 1, 4]. In, the first positive result for numerical taxonomy was presented. They showed that if e is the distance to the closest tree metric under the L{sub {infinity}} norm. i.e., e = min{sub T} [L{sub {infinity}} (T-D)], then it is possible to construct a tree T such that L{sub {infinity}} (T-D) {le} 3e, that is, they gave a 3-approximation algorithm for this problem. We will refer to this algorithm as the Single Pivot (SP) heuristic.

  9. Feedback control of a cupola - concepts and experimental results

    SciTech Connect

    Moore, K.L.; Abdelrahman, M.A.; Larsen, E.; Clark, D.; King, P.

    1998-10-01

    In this paper we present some final results from a research project focused on introducing automatic control to the operation of cupola iron furnaces. The main aim of this research is to improve the operational efficiency and performance of the cupola furnace, an important foundry process used to melt iron. Previous papers have described the development of appropriate control system architectures for the cupola. These results are summarized. Then we describe the experimental results obtained with the U.S. Department of Energy Albany Research Center`s research cupola. First, experimental data is used to calibrate the model, which is taken as a first-order multivariable system with time delay. Then relative gain analysis is used to select loop pairings to be used in a multi-loop controller. The resulting controller pairs meltrate with blast volume, iron temperature with oxygen addition, and carbon composition with percent coke. Special (nonlinear) filters are used to compute meltrate from actual scale readings of the amount of iron produced and to smooth the temperature measurement. The temperature and meltrate loops use single-loop PI control. The composition loop uses a Smith predictor to discount the deadtime associated with mass transport through the furnace. Experimental results validate the conceptual controller design and provide proof-of-concept of the idea of controlling a foundry cupola. Future research directions are discussed, including the concept of an integrated, intelligent industrial process controller, or I{sup 3}PC.

  10. Experimental results on constructed wetland pilot system.

    PubMed

    González, J M; Ansola, G; Luis, E

    2001-01-01

    Research into a constructed wetland for wastewater treatment using M.H.E.A. (Hierarchical Mosaic of Artificial Ecosystems) pilot system was carried out over a vegetative period in 8 different flow and vegetable composition series. The system consisted of a free water pond as a first step working as primary treatment followed by a zone with Typha sp. and surface flow and finally a woody zone with a subsurface flow and planted with ligneous species (Salixsp., Populus sp., Fraxinus sp. and Alnus sp.). Removal efficiency in the study reflects an optimal result: 80-99% total suspended matter removal, 82-98% organic matter removal, 70-98% nutrients removal and up to 99.9% faecal bacterial disinfecting. Effluent characteristics were in accordance with European Union legislation criteria for wastewater treatment systems. PMID:11804123

  11. Reactor-pumped laser experimental results

    SciTech Connect

    Hebner, G.A.; Hays, G.N.

    1994-12-31

    Reactor pumped lasers have the potential to be scaled to multi-megawatt power levels with long run times. In proposed designs, the laser will be capable of output powers of several megawatts of power for run times of several hours. Such a laser would have many diverse applications such as material processing, space debris removal and power beaming to geosynchronous satellites or the moon. However, before such systems can be designed, fundamental laser parameters such as small signal gain, saturation intensity and efficiency must be determined over a wide operational parameter space. The authors have recently measured fundamental laser parameters for a selection of nuclear pumped visible and near IR laser transitions in atomic neon, argon and xenon. An overview of the results of this investigation will be presented.

  12. Additional results on space environmental effects on polymer matrix composites: Experiment A0180

    NASA Technical Reports Server (NTRS)

    Tennyson, R. C.

    1992-01-01

    Additional experimental results on the atomic oxygen erosion of boron, Kevlar, and graphite fiber reinforced epoxy matrix composites are presented. Damage of composite laminates due to micrometeoroid/debris impacts is also examined with particular emphasis on the relationship between damage area and actual hole size due to particle penetration. Special attention is given to one micrometeoroid impact on an aluminum base plate which resulted in ejecta visible on an adjoining vertical flange structure.

  13. Overview of the initial NSTX experimental results

    NASA Astrophysics Data System (ADS)

    Ono, M.; Bell, M. G.; Bell, R. E.; Bigelow, T.; Bitter, M.; Blanchard, W.; Darrow, D. S.; Fredrickson, E. D.; Gates, D. A.; Grisham, L. R.; Hosea, J. C.; Johnson, D. W.; Kaita, R.; Kaye, S. M.; Kubota, S.; Kugel, H. W.; LeBlanc, B. P.; Maingi, R.; Maqueda, R.; Mazzucato, E.; Menard, J.; Mueller, D.; Nelson, B. A.; Neumeyer, C.; Paoletti, F.; Paul, S. F.; Peng, Y.-K. M.; Ramakrishnan, S.; Raman, R.; Ryan, P. M.; Sabbagh, S. A.; Skinner, C. H.; Stevenson, T.; Stutman, D.; Swain, D. W.; Synakowski, E. J.; Taylor, G.; Von Halle, A.; Wilgen, J.; Williams, M.; Wilson, J. R.; Zweben, S. J.; Ackers, R.; Barry, R. E.; Bers, A.; Bialek, J. M.; Bonoli, P. T.; Carter, M. D.; Chrzanowski, J.; Davis, W.; Doyle, E. J.; Dudek, L.; Efthimion, P. C.; Ellis, R.; Ferron, J. R.; Finkenthal, M.; Fredd, E.; Gibney, T.; Goldston, R. J.; Hatcher, R. E.; Hawryluck, R. J.; Hayashiya, H.; Hill, K. W.; Jarboe, T. R.; Jardin, S. C.; Ji, H.; Kalish, M.; La Marche, P.; Lao, L. L.; Lee, K. C.; Levinton, F. M.; Luhmann, N. C.; Majeski, R.; Manickam, J.; Marsala, R.; Mau, T. K.; McCormack, B.; Medley, S. S.; Menon, M. M.; Mitarai, O.; Nagata, M.; Nishino, N.; Oliaro, G.; Park, H. K.; Parsells, R.; Pearson, G.; Peebles, T.; Phillips, C. K.; Pinsker, R.; Porter, G. D.; Ram, A. K.; Robinson, J.; Roney, P.; Roquemore, A. L.; Rosenberg, A.; Schaffer, M.; Shiraiwa, S.; Sichta, P.; Stotler, D.; Stratton, B. C.; Takase, Y.; Wampler, W. R.; Wurden, G. A.; Xu, X. Q.; Yang, J. G.; Zeng, L.; Zhu, W.

    2001-10-01

    The main aim of the National Spherical Torus Experiment (NSTX) is to establish the fusion physics principles of the spherical torus (ST) concept. The NSTX device began plasma operations in February 1999 and the plasma current Ip was successfully brought up to the design value of 1 MA on 14 December 1999. The planned plasma shaping parameters, elongation κ = 1.6-2.2 and triangularity δ = 0.2-0.4, were achieved in inner wall limited, and single null and double null diverted configurations. The coaxial helicity injection (CHI) and high harmonic fast wave (HHFW) experiments were also initiated. CHI current of 27 kA produced up to 260 kA toroidal current without using an ohmic solenoid. With the injection of 2.3 MW of HHFW power, using 12 antennas connected to six transmitters, electrons were heated from a central temperature of 400 eV to 900 eV at a central density of 3.5 × 1013 cm-3, increasing the plasma energy to 59 kJ and the toroidal β, βT, to 10%. The NBI system commenced operation in September 2000. The initial results with two ion sources (PNBI = 2.8 MW) show good heating, producing a total plasma stored energy of 90 kJ corresponding to βT approx 18% at a plasma current of 1.1 MA.

  14. Liquid hydrogen for automotive vehicles - Experimental results

    SciTech Connect

    Peschka, W.

    1981-01-01

    A BMW-518 has been adapted for LH2-fuel, representing the first LH2-fueled car in Europe. This is a joint program between the German Research and Testing Laboratory for Aeronautics and the Research Institute for Motor-Transport Service and Automotive Engines at the University of Stuttgart. The program was established for demonstration of successful car-operation and and the safe handling of LH2-fuel during car operation and refueling. Based on earlier papers, more recent test results and experiences are reported about car operation and engine performance. The car has been driven over an accumulated distance of about 1800 km on a test track. The test track consists of a loop of about 2.5 km in length, including a proper combination of straight level sections, curved sections and ascending sections. In order to demonstrate a safe liquid hydrogen refueling procedure that could also be used by untrained people, a semiautomatic computer operated refueling station has been developed. This refueling station is in successful operation.

  15. Overview of the Initial NSTX Experimental Results

    SciTech Connect

    M. Ono; M. Bell; R. E. Bell; T. Bigelow; M. Bitter; et al

    2000-11-16

    The main aim of the National Spherical Torus Experiment (NSTX) is to establish the fusion physics principles of the spherical torus (ST) concept. The NSTX device began plasma operations in February 1999 and the plasma current Ip was successfully brought up to the design value of 1 million amperes on December 14, 1999. The planned plasma shaping parameters, k = 1.6 {+-} 2.2 and d = 0.2 {+-} 0.4, were achieved in inner limited, single null and double null configurations. The CHI (Coaxial Helicity Injection) and HHFW (High Harmonic Fast Wave) experiments were also initiated. A CHI injected current of 27 kA produced up to 260 kA of toroidal current without using an ohmic solenoid. With an injection of 2.3 MW of HHFW power, using twelve antennas connected to six transmitters, electrons were heated from a central temperature of 400 eV to 900 eV at a centraldensity of 3.5 x 1013 cm-3 increasing the plasma energy to 59 kJ and the toroidal beta, bT to 10 %. Finally, the NBI system commenced operatio n in Sept. 2000. The initial results with two ion sources (PNBI = 2.8 MW) shows good heating, producing a total plasma stored energy of 90 kJ corresponding to bT = 18 % at a plasma current of 1.1 MA

  16. On collisional disruption - Experimental results and scaling laws

    NASA Technical Reports Server (NTRS)

    Davis, Donald R.; Ryan, Eileen V.

    1990-01-01

    Both homogeneous and inhomogeneous targets have been addressed by the present experimental consideration of the impact strengths, fragment sizes, and fragment velocities generated by cement mortar targets whose crushing strengths vary by an order of magnitude, upon impact of projectiles in the velocity range of 50-5700 m/sec. When combined with additional published data, dynamic impact strength is found to correlate with quasi-static material strengths for materials ranging in character from basalt to ice; two materials not following this trend, however, are weak mortar and clay targets. Values consistent with experimental results are obtainable with a simple scaling algorithm based on impact energy, material properties, and collisional strain rate.

  17. Small-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Schonewill, Philip P.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, G. N.; Mahoney, Lenna A.; Tran, Diana N.; Burns, Carolyn A.; Kurath, Dean E.

    2013-08-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are largely absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale. The small-scale testing and resultant data are described in Mahoney et al. (2012b) and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used to mimic the

  18. Large-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Daniel, Richard C.; Gauglitz, Phillip A.; Burns, Carolyn A.; Fountain, Matthew S.; Shimskey, Rick W.; Billing, Justin M.; Bontha, Jagannadha R.; Kurath, Dean E.; Jenks, Jeromy WJ; MacFarlan, Paul J.; Mahoney, Lenna A.

    2013-08-01

    One of the events postulated in the hazard analysis for the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak event involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids that behave as a Newtonian fluid. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and in processing facilities across the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are mostly absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale testing. The small-scale testing and resultant data are described in Mahoney et al. (2012b), and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used

  19. Additional Results of Glaze Icing Scaling in SLD Conditions

    NASA Technical Reports Server (NTRS)

    Tsao, Jen-Ching

    2016-01-01

    New guidance of acceptable means of compliance with the super-cooled large drops (SLD) conditions has been issued by the U.S. Department of Transportation's Federal Aviation Administration (FAA) in its Advisory Circular AC 25-28 in November 2014. The Part 25, Appendix O is developed to define a representative icing environment for super-cooled large drops. Super-cooled large drops, which include freezing drizzle and freezing rain conditions, are not included in Appendix C. This paper reports results from recent glaze icing scaling tests conducted in NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the scaling methods recommended for Appendix C conditions might apply to SLD conditions. The models were straight NACA 0012 wing sections. The reference model had a chord of 72 in. and the scale model had a chord of 21 in. Reference tests were run with airspeeds of 100 and 130.3 kn and with MVD's of 85 and 170 micron. Two scaling methods were considered. One was based on the modified Ruff method with scale velocity found by matching the Weber number WeL. The other was proposed and developed by Feo specifically for strong glaze icing conditions, in which the scale liquid water content and velocity were found by matching reference and scale values of the nondimensional water-film thickness expression and the film Weber number Wef. All tests were conducted at 0 deg AOA. Results will be presented for stagnation freezing fractions of 0.2 and 0.3. For nondimensional reference and scale ice shape comparison, a new post-scanning ice shape digitization procedure was developed for extracting 2-D ice shape profiles at any selected span-wise location from the high fidelity 3-D scanned ice shapes obtained in the IRT.

  20. Augmenting a Waste Glass Mixture Experiment Study with Additional Glass Components and Experimental Runs

    SciTech Connect

    Piepel, Gregory F. ); Cooley, Scott K. ); Peeler, David K.; Vienna, John D. ); Edwards, Tommy B.

    2002-01-01

    A glass composition variation study (CVS) for high-level waste (HLW) stored in Idaho is being statistically designed and performed in phases over several years. The purpose of the CVS is to investigate and model how HLW-glass properties depend on glass composition. The resulting glass property-composition models will be used to develop desirable glass formulations and for other purposes. Phases 1 and 2 of the CVS have been completed and are briefly described. This paper focuses on the CVS Phase 3 experimental design, which was chosen to augment the Phase 1 and 2 data with additional data points, as well as to account for additional glass components not studied in Phases 1 and/or 2. In total, 16 glass components were varied in the Phase 3 experimental design. The paper describes how these Phase 3 experimental design augmentation challenges were addressed using the previous data, preliminary property-composition models, and statistical mixture experiment and optimal experimental design methods and software.

  1. An experimental survey of additives for improving dehydrogenation properties of magnesium hydride

    NASA Astrophysics Data System (ADS)

    Zhou, Chengshang; Fang, Zhigang Zak; Sun, Pei

    2015-03-01

    The use of a wide range of additives has been known as an important method for improving hydrogen storage properties of MgH2. There is a lack of a standard methodology, however, that can be used to select or compare the effectiveness of different additives. A systematic experimental survey was carried out in this study to compare a wide range of additives including transitions metals, transition metal oxides, hydrides, intermetallic compounds, and carbon materials, with respect to their effects on dehydrogenation properties of MgH2. MgH2 with various additives were prepared by using a high-energy-high-pressure planetary ball milling method and characterized by using thermogravimetric analysis (TGA) techniques. The results showed that additives such as Ti and V-based metals, hydride, and certain intermetallic compounds have strong catalytic effects. Additives such as Al, In, Sn, Si showed minor effects on the kinetics of the dehydrogenation of MgH2, while exhibiting moderate thermodynamic destabilizing effects. In combination, MgH2 with both kinetic and thermodynamic additives, such as the MgH2-In-TiMn2 system, exhibited a drastically decreased dehydrogenation temperature.

  2. The guanidine and maleic acid (1:1) complex. The additional theoretical and experimental studies

    NASA Astrophysics Data System (ADS)

    Drozd, Marek; Dudzic, Damian

    2012-04-01

    On the basis of experimental literature data the theoretical studies for guanidinium and maleic acid complex with using DFT method are performed. In these studies the experimental X-ray data for two different forms of investigated crystal were used. During the geometry optimization process one equilibrium structure was found, only. According to this result the infrared spectrum for one theoretical molecule was calculated. On the basis of potential energy distribution (PED) analysis the clear-cut assignments of observed bands were performed. For the calculated molecule with energy minimum the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were obtained and graphically illustrated. The energy difference (GAP) between HOMO and LUMO was analyzed. Additionally, the nonlinear properties of this molecule were calculated. The α and β (first and second order) hyperpolarizability values are obtained. On the basis of these results the title crystal was classified as new second order NLO generator.

  3. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  4. Some new experimental results on the Zr Nb Fe system

    NASA Astrophysics Data System (ADS)

    Ramos, C.; Saragovi, C.; Granovsky, M. S.

    2007-06-01

    The scope of this study is the identification and characterization of intermetallic phases and their binary and ternary fields in the Zr-Nb-Fe phase diagram. A construction of the central region of the phase diagram at 900 °C was proposed using new experimental results obtained by optical and scanning electron microscopies, X-ray diffraction and microprobe analysis. In addition to the well-known Laves C15-type (ZrNb)Fe 2 phase (the polytypic C14 and C36 structures were not detected in the studied compositions), another Laves C14-type phase was found (Zr(NbFe) 2). Watson and Bennett maps helped to predict the occurrence of both of these phases. Moreover, the validity of the Pettifor prediction model for Laves phases in pseudobinary systems with transition elements was checked, verifying the obtained experimental results in the Zr-Nb-Fe system. On the other hand it was determined that the Zr-Nb-Fe ternary system at 900 °C, as it happens in the binary Zr-Nb system, would have a miscibility gap (β-Zr + β-Nb) in the 25-70 at.% Nb composition range, accepting up to 3 at.% Fe approximately.

  5. Experimental Results of Guided Wave Travel Time Tomography

    NASA Astrophysics Data System (ADS)

    Volker, Arno; Mast, Arjan; Bloom, Joost

    2010-02-01

    Corrosion is one of the industries major issues regarding the integrity of assets. Currently inspections are conducted at regular intervals to ensure a sufficient integrity level of these assets. Both economical and social requirements are pushing the industry to even higher levels of availability, reliability and safety of installations. The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation is an interesting addition to the current method of periodic inspections reducing uncertainty and extending inspection intervals. Guided wave travel time tomography is a promising method to monitor the wall thickness quantitatively over large areas. Obviously the robustness and reliability of such a monitoring system is of paramount importance. Laboratory experiments have been carried out on a 10″ pipe with a nominal wall thickness of 8 mm. Multiple, inline defects have been created with a realistic morphology. The depth of the defects was increased stepwise from 0.5 mm to 2 mm. Additionally the influences of the presence of liquid inside the pipe and surface roughness have been evaluated as well. Experimental results show that this method is capable of providing quantitative wall thickness information over a distance of 4 meter, with a sufficient accuracy such that results can be used for trending. The method has no problems imaging multiple defects.

  6. Results from an experimental railgun system: ERGS-1A

    NASA Astrophysics Data System (ADS)

    Thio, Y. C.; Clark, G. A.; Bedford, A. J.

    1983-03-01

    One phase of the Materials Research Laboratories (MRL) Experimental Rail-gun System (ERGS-1) program is for experimentation in the energy range 50 to 500 kJ. The first, and highly successful, ERGS-1 experiment was conducted in September 1981 using a barrel segment 200 mm in length. Comparison of experimental results with the theory developed by Thio yielded good agreement, particularly the values for capacitor voltage, current through the rails, plasma voltage and muzzle velocity of the projectile.

  7. Improving wound care simulation with the addition of odor: a descriptive, quasi-experimental study.

    PubMed

    Roberson, Donna W; Neil, Janice A; Bryant, Elizabeth T

    2008-08-01

    Improving problem-solving skills and expertise in complex clinical care provision requires engaging students in the learning process--a challenging goal when clinical practicums and supervisors are limited. High-fidelity simulation has created many new opportunities for educating healthcare professionals. Because addressing malodorous wounds is a common problem that may be difficult to "teach," a descriptive, quasi-experimental simulation study was conducted. Following completion of a wound care simulation and Laerdal's Simulation Experience Evaluation Tool by 137 undergraduate nursing students, 50 control subjects were randomly selected and 49 volunteer students (experimental group) participated in a wound care simulation after one of three cheeses with a strong odor was added to simulate a malodorous wound. Compared to the control group, study group responses were significantly better (P <0.001) for eight of the 12 survey variables tested and indicated the addition of odor was beneficial in enhancing the perceived realism and value of the simulation. Students responded that the addition of odor in the simulation laboratory improved realism and they felt better prepared to handle malodorous wounds in a clinical setting. An unanticipated outcome was the enhanced feeling of involvement associated with paired care teams as opposed to working in larger groups. The results of this study indicate that wound care education outcomes improve when nursing students are able to practice using a multi-sensorial wound care simulation model. PMID:18716340

  8. Experimental results of guided wave travel time tomography

    NASA Astrophysics Data System (ADS)

    Volker, Arno; Vos, Hendrik

    2012-05-01

    Corrosion is one of the industries major issues regarding the integrity of assets. Currently inspections are conducted at regular intervals to ensure a sufficient integrity level of these assets. Cost reduction while maintaining a high level of reliability and safety of installations is a major challenge. The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation matches very well with the objective to reduce cost while maintaining a high safety level. Guided waves are very attractive for permanent monitoring systems because it provides a wall thickness map in between two sensor rings. The wall thickness map provides quantitative information about the remaining wall thickness, location and extent of the corrosion. The performance of guided wave tomography has been evaluated experimentally assessing the sizing accuracy and the smallest corrosion spots that can be detected with this technology. The results show accurate sizing, with a sizing accuracy better than 10% of the nominal wall thickness. Additionally, the maximum distance between the transmitter and receiver rings and the presence of different coatings has been evaluated. The results demonstrate the robustness of the technology under a range of practical conditions.

  9. Experimental Results of Hydrate Reservoir Destabilization Through Heating

    NASA Astrophysics Data System (ADS)

    Leeman, J.; Hornbach, M. J.; Elwood-Madden, M.; Phelps, T. J.; Rawn, C. J.

    2011-12-01

    Gas clathrate reservoirs have been considered as possible sources of energy, as hazards to deep water drilling operations, and as contributors to global climate change. Clathrate destabilization may occur through depressurization of the reservoir, addition of chemical inhibitors, or heating the reservoir. Meso-scale heat conduction experiments were conducted in the Seafloor Process Simulator (SPS) at Oak Ridge National Laboratory in an attempt to apply experimental constraints to purely numerical models of heat transfer within a nearly isobaric reservoir. A column of saturated sediment was place inside the pressure vessel and pressurized to conditions sufficient to form methane clathrate at seafloor temperatures, while the system remained at room temperature (298K). Once pressurized, the temperature of the vessel was then lowered to approximately 275K, forming pore filling clathrate in the sediment column. Following hydrate formation, heat was supplied to the center of the clathrate reservoir through a hot fluid heat exchanger embedded in the sediment column to dissociate the methane hydrate. Relative changes in temperature within the hydrate-sediment column were monitored with a fiber optic quasi-distributed sensing system (DSS), along with temperature and pressure within the vessel headspace. Using the DSS Plotter analysis software, it was determined that an axis-symmetric section of clathrate was dissociated around the heat exchanger. Clathrate dissociation was accompanied by a small rise in vessel headspace pressure in addition to the expected thermal expansion of the headspace gas. The quantity of heat input to the system was calculated from the drop in fluid temperature as it flowed through the heat exchanger. Increased heat input resulted in an increase in the volume of hydrate dissociated. Clathrate rapidly reformed immediately upon the removal of the heat energy. A simple numerical model has been developed to simulate the heat flow in the system. Early

  10. Experimental model and analytic solution for real-time observation of vehicle's additional steer angle

    NASA Astrophysics Data System (ADS)

    Zhang, Xiaolong; Li, Liang; Pan, Deng; Cao, Chengmao; Song, Jian

    2014-03-01

    The current research of real-time observation for vehicle roll steer angle and compliance steer angle(both of them comprehensively referred as the additional steer angle in this paper) mainly employs the linear vehicle dynamic model, in which only the lateral acceleration of vehicle body is considered. The observation accuracy resorting to this method cannot meet the requirements of vehicle real-time stability control, especially under extreme driving conditions. The paper explores the solution resorting to experimental method. Firstly, a multi-body dynamic model of a passenger car is built based on the ADAMS/Car software, whose dynamic accuracy is verified by the same vehicle's roadway test data of steady static circular test. Based on this simulation platform, several influencing factors of additional steer angle under different driving conditions are quantitatively analyzed. Then ɛ-SVR algorithm is employed to build the additional steer angle prediction model, whose input vectors mainly include the sensor information of standard electronic stability control system(ESC). The method of typical slalom tests and FMVSS 126 tests are adopted to make simulation, train model and test model's generalization performance. The test result shows that the influence of lateral acceleration on additional steer angle is maximal (the magnitude up to 1°), followed by the longitudinal acceleration-deceleration and the road wave amplitude (the magnitude up to 0.3°). Moreover, both the prediction accuracy and the calculation real-time of the model can meet the control requirements of ESC. This research expands the accurate observation methods of the additional steer angle under extreme driving conditions.

  11. Internal wave emission from baroclinic jets: experimental results

    NASA Astrophysics Data System (ADS)

    Borcia, Ion D.; Rodda, Costanza; Harlander, Uwe

    2016-04-01

    Large-scale balanced flows can spontaneously radiate meso-scale inertia-gravity waves (IGWs) and are thus in fact unbalanced. While flow-dependent parameterizations for the radiation of IGWs from orographic and convective sources do exist, the situation is less developed for spontaneously emitted IGWs. Observations identify increased IGW activity in the vicinity of jet exit regions. A direct interpretation of those based on geostrophic adjustment might be tempting. However, directly applying this concept to the parameterization of spontaneous imbalance is difficult since the dynamics itself is continuously re-establishing an unbalanced flow which then sheds imbalances by GW radiation. Examining spontaneous IGW emission in the atmosphere and validating parameterization schemes confronts the scientist with particular challenges. Due to its extreme complexity, GW emission will always be embedded in the interaction of a multitude of interdependent processes, many of which are hardly detectable from analysis or campaign data. The benefits of repeated and more detailed measurements, while representing the only source of information about the real atmosphere, are limited by the non-repeatability of an atmospheric situation. The same event never occurs twice. This argues for complementary laboratory experiments, which can provide a more focused dialogue between experiment and theory. Indeed, life cycles are also examined in rotating-annulus laboratory experiments. Thus, these experiments might form a useful empirical benchmark for theoretical and modeling work that is also independent of any sort of subgrid model. In addition, the more direct correspondence between experimental and model data and the data reproducibility makes lab experiments a powerful testbed for parameterizations. Here we show first results from a small rotating annulus experiments and we will further present our new experimental facility to study wave emission from jets and fronts.

  12. Experimental study of combustion characteristics of nanoscale metal and metal oxide additives in biofuel (ethanol)

    PubMed Central

    2011-01-01

    An experimental investigation of the combustion behavior of nano-aluminum (n-Al) and nano-aluminum oxide (n-Al2O3) particles stably suspended in biofuel (ethanol) as a secondary energy carrier was conducted. The heat of combustion (HoC) was studied using a modified static bomb calorimeter system. Combustion element composition and surface morphology were evaluated using a SEM/EDS system. N-Al and n-Al2O3 particles of 50- and 36-nm diameters, respectively, were utilized in this investigation. Combustion experiments were performed with volume fractions of 1, 3, 5, 7, and 10% for n-Al, and 0.5, 1, 3, and 5% for n-Al2O3. The results indicate that the amount of heat released from ethanol combustion increases almost linearly with n-Al concentration. N-Al volume fractions of 1 and 3% did not show enhancement in the average volumetric HoC, but higher volume fractions of 5, 7, and 10% increased the volumetric HoC by 5.82, 8.65, and 15.31%, respectively. N-Al2O3 and heavily passivated n-Al additives did not participate in combustion reactively, and there was no contribution from Al2O3 to the HoC in the tests. A combustion model that utilized Chemical Equilibrium with Applications was conducted as well and was shown to be in good agreement with the experimental results. PMID:21711760

  13. Responses of Bog Vegetation and CO2 Exchange to Experimental N and PK Addition

    NASA Astrophysics Data System (ADS)

    Juutinen, S.; Bubier, J. L.; Shrestha, P.; Smith, R.; Moore, T.

    2008-12-01

    Atmospheric nitrogen (N) deposition has the potential to alter the structure and functioning of nutrient poor wetland ecosystems. It is important to quantify the effect of N input on ecosystem carbon (C) sequestration in these globally important C storages. We address this issue at the temperate Mer Bleue bog, ON, Canada. After 6 years of experimental fertilization, we saw that high N deposition can change mixed Sphagnum and dwarf shrub dominated communities to taller and denser dwarf shrub communities that are losing moss cover, and which might have even lower net C uptake. Now, after 8 years of fertilization and with new treatments we quantify the relationship between the plant community structure and ecosystem CO2 exchange. Three levels of N fertilization were applied with or without phosphorus and potassium (PK) into triplicate plots. We measured light saturated net ecosystem CO2 exchange (NEE), and its components ecosystem respiration and gross photosynthesis using clear and dark chambers (May-August). Vegetation characteristics were quantified by measuring foliage cover (LAI), amount of woody and foliar biomass, and abundance of moss species (point interception technique), moss growth (cranked wires) and green area of vascular leaves and moss. Addition of PK fertilizer did not alter NEE or its components relative to the control. The 8-year low N addition alone and with PK, and the 4-year fertilization with high N levels resulted in the highest net ecosystem CO2 uptake relative to the control. The ecosystem respiration increased with increasing N input rate. All levels of N fertilization resulted in higher gross photosynthesis than the control, but there was no increasing trend with increasing N input. Vascular foliage increased, while moss cover drastically decreased with increasing levels of N fertilization. At the highest level of N (and PK) addition woody biomass increased at the expense of leaf increment. Dependencies of ecosystem CO2 exchange on the

  14. Experimental study of the Timoshenko beam theory predictions: Further results

    NASA Astrophysics Data System (ADS)

    Monsivais, G.; Díaz-de-Anda, A.; Flores, J.; Gutiérrez, L.; Morales, A.

    2016-08-01

    In a previous paper (2012) we presented experimental results proving that the critical frequency fC predicted by Timoshenko beam theory indeed exists. We also showed that for frequencies f smaller than fC the spectrum is formed by almost equally spaced levels whereas for f >fC the spectrum consists of pairs of eigenvalues very close to each other as predicted by numerical solutions of Timoshenko's equation: we shall refer to them as Timoshenko doublets. In this work we measure for the first time experimental dispersion relations. For this purpose it was necessary to obtain normal-mode amplitudes with a high precision, which was done with a new experimental setup developed by us. We found that experimental dispersion relations coincide very well with theoretical predictions. Furthermore, we provide an explanation of Timoshenko doublets.

  15. Ultrasonic radiation from wedges of cubic profile: Experimental results.

    PubMed

    Anderson, Brian E; Remillieux, Marcel C; Le Bas, Pierre-Yves; Ulrich, T J; Pieczonka, Lukasz

    2015-12-01

    This paper presents experimental results demonstrating the increase in ultrasonic radiation obtained from a wedge of cubic profile relative to a plate of uniform thickness. The wedge of cubic profile provides high efficiency sound radiation matching layer from a mounted piezoelectric transducer into the surrounding air. Previous research on structures with indentations of power-law profile has focused on vibration mitigation using the so called "acoustic black-hole" effect, whereas here such structures are used to enhance ultrasonic radiation. The work provides experimental verification of the numerical results of Remillieux et al. (2014). PMID:26166628

  16. Comparison of calculated and experimental results of fragmenting cylinder experiments

    SciTech Connect

    WILSON,L.T.; REEDAL,D.R.; KIPP,MARLIN E.; MARTINEZ,REINA R.; GRADY,D.E.

    2000-06-02

    The Grady-Kipp fragmentation model provides a physically based method for determining the fracture and breakup of materials under high loading rates. Recently, this model has been implemented into the CTH Shock Physics Code and has been used to simulate several published experiments. Materials studied in this paper are AerMet 100 steel and a 90% tungsten alloy. The experimental geometry consists of a right circular cylinder filled with an explosive main charge that is initiated at its center. The sudden expansion of the resulting detonation products causes fracture of the cylinder. Strain rates seen in the cylinder are on the order of 10{sup 4} s{sup {minus}1}. The average fragment sizes calculated with the Grady-Kipp fragmentation model successfully replicate the mean fragment size obtained from the experimental fragment distribution. When Poisson statistics are applied to the calculated local average fragment sizes, good correlation is also observed with the shape of the experimental cumulative fragment distribution. The experimental fragmentation results, CTH numerical simulations, and correlation of these numerical results with the experimental data are described.

  17. Experimental Results on Jets in pA

    NASA Astrophysics Data System (ADS)

    Appelt, Eric

    2015-04-01

    The experimentally observed reduction of jet yields in ultrarelativistic heavy ion (AA) collisions relative to proton-proton (pp) collisions is widely interpreted in terms of energy loss of a hard scattered parton traversing a quark-gluon plasma (QGP) before fragmenting into a jet of hadrons. In order to constrain proposed mechanisms of energy loss, a variety of measurements are needed that quantify both how the jet yields and jet structure are modified in the medium. However, jets may also be modified by differences in the initial state of the nucleus relative to that of the proton. The precise determination of the QGP properties relies on disentangling these additional modifications, collectively termed ``cold nuclear matter'' effects, from energy loss in the QGP. Collisions between heavy ions and protons (pA) provide a potential control environment where cold nuclear matter effects should be present, but QGP formation is generally not expected to occur. In this talk, an overview of recent jet results from proton-lead collisions produced at the LHC will be given. The yield of inclusive jets and distributions of dijet pairs are shown to be compatible with generally accepted theoretical expectations, although significant modification is observed when yields are measured from specific centrality classes of pA collision events. Some measurements of high-pT charged hadron yields suggest a larger modification in pA collisions relative to pp collisions than for inclusive jet yields. The potential implications of this difference along with other measurements relating to jet structure will be discussed.

  18. CSI sensing and control: Analytical and experimental results

    NASA Technical Reports Server (NTRS)

    Junkins, J. L.; Pollock, T. C.; Rahman, Z. H.

    1989-01-01

    Recent work on structural identification and large-angle maneuvers with vibration suppression was presented. The recent work has sought to balance structural and controls analysis activities by involving the analysts directly in the validation and experimental aspects of the research. Some new sensing, actuation, system identification, and control concepts were successfully implemented. An overview of these results is given.

  19. Experimental overview of Generalized Parton Distribution results from HERMES

    SciTech Connect

    Zihlmann, B.

    2009-08-04

    Over the course of more than a decade the HERMES experiment has accumulated a wealth of data with electron and positron beams on various gaseous targets from Hydrogen up to Xenon. In addition, the beams and targets can be polarized. This data set is viewed in the context of Generalized Parton Distributions, a theoretical formalism with an explicit three dimensional view of the structure of the nucleon. It provides a link between experimental observables and the total angular momentum of the quarks in the nucleon.

  20. Design and experimental results for the S805 airfoil

    SciTech Connect

    Somers, D.M.

    1997-01-01

    An airfoil for horizontal-axis wind-turbine applications, the S805, has been designed and analyzed theoretically and verified experimentally in the low-turbulence wind tunnel of the Delft University of Technology Low Speed Laboratory, The Netherlands. The two primary objectives of restrained maximum lift, insensitive to roughness, and low profile drag have been achieved. The airfoil also exhibits a docile stall. Comparisons of the theoretical and experimental results show good agreement. Comparisons with other airfoils illustrate the restrained maximum lift coefficient as well as the lower profile-drag coefficients, thus confirming the achievement of the primary objectives.

  1. Design and experimental results for the S809 airfoil

    SciTech Connect

    Somers, D M

    1997-01-01

    A 21-percent-thick, laminar-flow airfoil, the S809, for horizontal-axis wind-turbine applications, has been designed and analyzed theoretically and verified experimentally in the low-turbulence wind tunnel of the Delft University of Technology Low Speed Laboratory, The Netherlands. The two primary objectives of restrained maximum lift, insensitive to roughness, and low profile drag have been achieved. The airfoil also exhibits a docile stall. Comparisons of the theoretical and experimental results show good agreement. Comparisons with other airfoils illustrate the restrained maximum lift coefficient as well as the lower profile-drag coefficients, thus confirming the achievement of the primary objectives.

  2. Experimental results of a predictive neural network HVAC controller

    SciTech Connect

    Jeannette, E.; Assawamartbunlue, K.; Kreider, J.F.; Curtiss, P.S.

    1998-12-31

    Proportional, integral, and derivative (PID) control is widely used in many HVAC control processes and requires constant attention for optimal control. Artificial neural networks offer the potential for improved control of processes through predictive techniques. This paper introduces and shows experimental results of a predictive neural network (PNN) controller applied to an unstable hot water system in an air-handling unit. Actual laboratory testing of the PNN and PID controllers show favorable results for the PNN controller.

  3. Robustness to noise in synchronization of network motifs: Experimental results

    NASA Astrophysics Data System (ADS)

    Buscarino, Arturo; Fortuna, Luigi; Frasca, Mattia; Iachello, Marco; Pham, Viet-Thanh

    2012-12-01

    In this work, we experimentally investigate the robustness to noise of synchronization in all the four-nodes network motifs. The experimental setup consists of four Chua's circuits diffusively coupled in order to implement the six different undirected network motifs that can be obtained with four nodes. In this experimental setup, synchronization in the presence of noise injected in one of the network nodes is investigated and network motifs are compared in terms of the synchronization error obtained. The analysis has been then extended to some selected case studies of networks with five and six nodes. Numerical simulations have been also performed and results in agreement with experiments have been obtained. A correlation between node degree and robustness to noise has been found also in these networks.

  4. Experimental results for a hypersonic nozzle/afterbody flow field

    NASA Technical Reports Server (NTRS)

    Spaid, Frank W.; Keener, Earl R.; Hui, Frank C. L.

    1995-01-01

    This study was conducted to experimentally characterize the flow field created by the interaction of a single-expansion ramp-nozzle (SERN) flow with a hypersonic external stream. Data were obtained from a generic nozzle/afterbody model in the 3.5 Foot Hypersonic Wind Tunnel at the NASA Ames Research Center, in a cooperative experimental program involving Ames and McDonnell Douglas Aerospace. The model design and test planning were performed in close cooperation with members of the Ames computational fluid dynamics (CFD) team for the National Aerospace Plane (NASP) program. This paper presents experimental results consisting of oil-flow and shadow graph flow-visualization photographs, afterbody surface-pressure distributions, rake boundary-layer measurements, Preston-tube skin-friction measurements, and flow field surveys with five-hole and thermocouple probes. The probe data consist of impact pressure, flow direction, and total temperature profiles in the interaction flow field.

  5. Novel Thermoelectric Modules for Cooling Powerful LEDs: Experimental Results

    NASA Astrophysics Data System (ADS)

    Semenyuk, V.; Dekhtiaruk, R.

    2013-07-01

    We present the results of an experimental study of a cooling system based on a novel thermoelectric module specifically designed for thermal management of high-power light-emitting diodes (LEDs). The Seoul Semiconductor LED W724C0 device was chosen for experimental validation of the efficiency of the proposed cooling unit. Two cooling systems with identical heat sinks were tested for comparison: a state-of-the-art one based on an insulated metal substrate-printed circuit board (IMS-PCB), and a system with thermoelectric cooling. The obtained results show that use of thermoelectrics results in a considerable reduction of the LED operating temperature, providing increased light output and greatly increased LED lifetime.

  6. Additive Effect of rPb27 Immunization and Chemotherapy in Experimental Paracoccidioidomycosis

    PubMed Central

    Fernandes, Viviane C.; Martins, Estefânia M. N.; Boeloni, Jankerle N.; Coitinho, Juliana B.; Serakides, Rogéria; Goes, Alfredo M.

    2011-01-01

    Paracoccidioidomycosis, PCM, the major systemic mycosis in Latin America, is caused by the termally dimorphic fungus Paracoccidioides brasiliensis and requires extended periods of chemotherapy with a significant frequency of relapsing disease. The search for new alternatives of treatment is necessary. rPb27 is an antigenic protein from P. brasiliensis that already showed a significant protective activity as a vaccine for PCM in experimental models. The cDNA of rPb27 was subcloned into a pET-DEST 42 plasmid, expressed in E. coli with a his-tag and purified by affinity chromatography. Immunization with this recombinant protein and chemotherapy were used together in an attempt to improve treatment of PCM. For this, BALB/c mice were challenged with pathogenic P. brasiliensis strain and after immunized with rPb27, in the presence of Corynebacterium parvum and Al(OH)3, some groups were also treated with fluconazole. After 40 days of treatment, the combined drug/rPb27 administration controlled PCM in the liver and spleen, with long lasting protection, and largely preserved tissues structures of these organs. Additionally, in the lungs after 40 days of treatment there was a significant reduction in the fungal load and size of lesions. At the same time, the levels of TNF-α were higher than infected-only mice. Moreover, significant levels of anti-rPb27 specific IgG1, IgG2a and IgG2b isotypes were detected in the sera of mice immunized with rPb27 fluconazole treated or not. These results showed an additive protective effect of rPb27 immunization and chemotherapy, suggesting that an rPb27-based vaccine can be used to enhance PCM antifungal treatment. PMID:21423771

  7. Additive effect of rPb27 immunization and chemotherapy in experimental paracoccidioidomycosis.

    PubMed

    Fernandes, Viviane C; Martins, Estefânia M N; Boeloni, Jankerle N; Coitinho, Juliana B; Serakides, Rogéria; Goes, Alfredo M

    2011-01-01

    Paracoccidioidomycosis, PCM, the major systemic mycosis in Latin America, is caused by the termally dimorphic fungus Paracoccidioides brasiliensis and requires extended periods of chemotherapy with a significant frequency of relapsing disease. The search for new alternatives of treatment is necessary. rPb27 is an antigenic protein from P. brasiliensis that already showed a significant protective activity as a vaccine for PCM in experimental models. The cDNA of rPb27 was subcloned into a pET-DEST 42 plasmid, expressed in E. coli with a his-tag and purified by affinity chromatography. Immunization with this recombinant protein and chemotherapy were used together in an attempt to improve treatment of PCM. For this, BALB/c mice were challenged with pathogenic P. brasiliensis strain and after immunized with rPb27, in the presence of Corynebacterium parvum and Al(OH)(3), some groups were also treated with fluconazole. After 40 days of treatment, the combined drug/rPb27 administration controlled PCM in the liver and spleen, with long lasting protection, and largely preserved tissues structures of these organs. Additionally, in the lungs after 40 days of treatment there was a significant reduction in the fungal load and size of lesions. At the same time, the levels of TNF-α were higher than infected-only mice. Moreover, significant levels of anti-rPb27 specific IgG1, IgG2a and IgG2b isotypes were detected in the sera of mice immunized with rPb27 fluconazole treated or not. These results showed an additive protective effect of rPb27 immunization and chemotherapy, suggesting that an rPb27-based vaccine can be used to enhance PCM antifungal treatment. PMID:21423771

  8. An Experimental Investigation of the Influence of the Lubricant Viscosity and Additives on Gear Wear

    NASA Technical Reports Server (NTRS)

    Krantz, Timothy L.; Kahraman, Ahmet

    2005-01-01

    The influence of lubricant viscosity and additives on the average wear rate of spur gear pairs was investigated experimentally. The gear specimens of a comprehensive gear durability test program that made use of seven lubricants covering a range of viscosities were examined to measure gear tooth wear. The measured wear was related to the as-manufactured surface roughness, the elastohydrodynamic film thickness, and the experimentally determined contact fatigue lives of the same specimens. In general, the wear rate was found to be inversely proportional to the viscosity of the lubricant and to the lambda ratio (also sometimes called the specific film thickness). The data also show an exponential trend between the average wear rates and the surface fatigue lives. Lubricants with similar viscosities but differing additives and compositions had somewhat differing gear surface fatigue lives and wear rates.

  9. Alkali Metal Backup Cooling for Stirling Systems - Experimental Results

    NASA Technical Reports Server (NTRS)

    Schwendeman, Carl; Tarau, Calin; Anderson, William G.; Cornell, Peggy A.

    2013-01-01

    In a Stirling Radioisotope Power System (RPS), heat must be continuously removed from the General Purpose Heat Source (GPHS) modules to maintain the modules and surrounding insulation at acceptable temperatures. The Stirling convertor normally provides this cooling. If the Stirling convertor stops in the current system, the insulation is designed to spoil, preventing damage to the GPHS at the cost of an early termination of the mission. An alkali-metal Variable Conductance Heat Pipe (VCHP) can be used to passively allow multiple stops and restarts of the Stirling convertor. In a previous NASA SBIR Program, Advanced Cooling Technologies, Inc. (ACT) developed a series of sodium VCHPs as backup cooling systems for Stirling RPS. The operation of these VCHPs was demonstrated using Stirling heater head simulators and GPHS simulators. In the most recent effort, a sodium VCHP with a stainless steel envelope was designed, fabricated and tested at NASA Glenn Research Center (GRC) with a Stirling convertor for two concepts; one for the Advanced Stirling Radioisotope Generator (ASRG) back up cooling system and one for the Long-lived Venus Lander thermal management system. The VCHP is designed to activate and remove heat from the stopped convertor at a 19 C temperature increase from the nominal vapor temperature. The 19 C temperature increase from nominal is low enough to avoid risking standard ASRG operation and spoiling of the Multi-Layer Insulation (MLI). In addition, the same backup cooling system can be applied to the Stirling convertor used for the refrigeration system of the Long-lived Venus Lander. The VCHP will allow the refrigeration system to: 1) rest during transit at a lower temperature than nominal; 2) pre-cool the modules to an even lower temperature before the entry in Venus atmosphere; 3) work at nominal temperature on Venus surface; 4) briefly stop multiple times on the Venus surface to allow scientific measurements. This paper presents the experimental

  10. Alkali Metal Backup Cooling for Stirling Systems - Experimental Results

    NASA Technical Reports Server (NTRS)

    Schwendeman, Carl; Tarau, Calin; Anderson, William G.; Cornell, Peggy A.

    2013-01-01

    In a Stirling Radioisotope Power System (RPS), heat must be continuously removed from the General Purpose Heat Source (GPHS) modules to maintain the modules and surrounding insulation at acceptable temperatures. The Stirling convertor normally provides this cooling. If the Stirling convertor stops in the current system, the insulation is designed to spoil, preventing damage to the GPHS at the cost of an early termination of the mission. An alkali-metal Variable Conductance Heat Pipe (VCHP) can be used to passively allow multiple stops and restarts of the Stirling convertor. In a previous NASA SBIR Program, Advanced Cooling Technologies, Inc. (ACT) developed a series of sodium VCHPs as backup cooling systems for Stirling RPS. The operation of these VCHPs was demonstrated using Stirling heater head simulators and GPHS simulators. In the most recent effort, a sodium VCHP with a stainless steel envelope was designed, fabricated and tested at NASA Glenn Research Center (GRC) with a Stirling convertor for two concepts; one for the Advanced Stirling Radioisotope Generator (ASRG) back up cooling system and one for the Long-lived Venus Lander thermal management system. The VCHP is designed to activate and remove heat from the stopped convertor at a 19 degC temperature increase from the nominal vapor temperature. The 19 degC temperature increase from nominal is low enough to avoid risking standard ASRG operation and spoiling of the Multi-Layer Insulation (MLI). In addition, the same backup cooling system can be applied to the Stirling convertor used for the refrigeration system of the Long-lived Venus Lander. The VCHP will allow the refrigeration system to: 1) rest during transit at a lower temperature than nominal; 2) pre-cool the modules to an even lower temperature before the entry in Venus atmosphere; 3) work at nominal temperature on Venus surface; 4) briefly stop multiple times on the Venus surface to allow scientific measurements. This paper presents the experimental

  11. Experimental overview of COMPASS and CLAS results on TMDs

    NASA Astrophysics Data System (ADS)

    Riedl, Caroline

    2016-03-01

    In the past years, distribution functions depending on the transverse momentum of partons in the nucleon (TMDs) have been intensely studied in spin physics. The TMDs represent one approach to disentangle the multi-dimensional structure of the nucleon. Correlations of the transverse spin of quarks with their transverse momentum can be observed by measuring spin azimuthal asymmetries. Experimental results from the COMPASS (CERN) and CLAS (Jefferson Laboratory) collaborations are presented and an outlook to upcoming measurements at these facilities is given.

  12. Modeling and experimental result analysis for high-power VECSELs

    NASA Astrophysics Data System (ADS)

    Zakharian, Aramais R.; Hader, Joerg; Moloney, Jerome V.; Koch, Stephan W.; Lutgen, Stephan; Brick, Peter; Albrecht, Tony; Grotsch, Stefan; Luft, Johann; Spath, Werner

    2003-06-01

    We present a comparison of experimental and microscopically based model results for optically pumped vertical external cavity surface emitting semiconductor lasers. The quantum well gain model is based on a quantitative ab-initio approach that allows calculation of a complex material susceptibility dependence on the wavelength, carrier density and lattice temperature. The gain model is coupled to the macroscopic thermal transport, spatially resolved in both the radial and longitudinal directions, with temperature and carrier density dependent pump absorption. The radial distribution of the refractive index and gain due to temperature variation are computed. Thermal managment issues, highlighted by the experimental data, are discussed. Experimental results indicate a critical dependence of the input power, at which thermal roll-over occurs, on the thermal resistance of the device. This requires minimization of the substrate thickness and optimization of the design and placement of the heatsink. Dependence of the model results on the radiative and non-radiative carrier recombination lifetimes and cavity losses are evaluated.

  13. Mechanical properties of triaxially braided composites: Experimental and analytical results

    NASA Technical Reports Server (NTRS)

    Masters, John E.; Foye, Raymond L.; Pastore, Christopher M.; Gowayed, Yasser A.

    1992-01-01

    The unnotched tensile properties of 2-D triaxial braid reinforced composites from both an experimental and an analytical viewpoint are studied. The materials are graphite fibers in an epoxy matrix. Three different reinforcing fiber architectures were considered. Specimens were cut from resin transfer molded (RTM) composite panels made from each braid. There were considerable differences in the observed elastic constants from different size strain gage and extensometer reading. Larger strain gages gave more consistent results and correlated better with the extensometer reading. Experimental strains correlated reasonably well with analytical predictions in the longitudinal, 0 degrees, fiber direction but not in the transverse direction. Tensile strength results were not always predictable even in reinforcing directions. Minor changes in braid geometry led to disproportionate strength variations. The unit cell structure of the triaxial braid was discussed with the assistance of computer analysis of the microgeometry. Photomicrographs of braid geometry were used to improve upon the computer graphics representations of unit cells. These unit cells were used to predict the elastic moduli with various degrees of sophistication. The simple and the complex analyses were generally in agreement but none adequately matched the experimental results for all the braids.

  14. Mechanical properties of triaxially braided composites: Experimental and analytical results

    NASA Technical Reports Server (NTRS)

    Masters, John E.; Foye, Raymond L.; Pastore, Christopher M.; Gowayed, Yasser A.

    1992-01-01

    This paper investigates the unnotched tensile properties of two-dimensional triaxial braid reinforced composites from both an experimental and analytical viewpoint. The materials are graphite fibers in an epoxy matrix. Three different reinforcing fiber architectures were considered. Specimens were cut from resin transfer molded (RTM) composite panels made from each braid. There were considerable differences in the observed elastic constants from different size strain gage and extensometer readings. Larger strain gages gave more consistent results and correlated better with the extensometer readings. Experimental strains correlated reasonably well with analytical predictions in the longitudinal, zero degree, fiber direction but not in the transverse direction. Tensile strength results were not always predictable even in reinforcing directions. Minor changes in braid geometry led to disproportionate strength variations. The unit cell structure of the triaxial braid was discussed with the assistence of computer analysis of the microgeometry. Photomicrographs of the braid geometry were used to improve upon the computer graphics representations of unit cells. These unit cells were used to predict the elastic moduli with various degrees of sophistication. The simple and the complex analyses were generally in agreement but none adequately matched the experimental results for all the braids.

  15. Additive effects of pollinators and herbivores result in both conflicting and reinforcing selection on floral traits.

    PubMed

    Sletvold, Nina; Moritz, Kim K; Agren, Jon

    2015-01-01

    Mutualists and antagonists are known to respond to similar floral cues, and may thus cause opposing selection on floral traits. However, we lack a quantitative understanding of their independent and interactive effects. In a population of the orchid Gymnadenia conopsea, we manipulated the intensity of pollination and herbivory in a factorial design to examine whether both interactions influence selection on flowering phenology, floral display, and morphology. Supplemental hand-pollination increased female fitness by 31% and one-quarter of all plants were damaged by herbivores. Both interactions contributed to selection. Pollinators mediated selection for later flowering and herbivores for earlier flowering, while both selected for longer spurs. The strength of selection was similar for both agents, and their effects were additive. As a consequence, there was no. net selection on phenology, whereas selection on spur length was strong. The experimental results demonstrate that both pollinators and herbivores can markedly influence the strength of selection on flowering phenology and floral morphology, and cause both conflicting and reinforcing selection. They also indicate that the direction of selection on phenology will vary with the relative intensity of the mutualistic and antagonistic interaction, potentially resulting in both temporal and among-population variation in optimal flowering time. PMID:26236906

  16. Modeling, Simulation, Additive Manufacturing, and Experimental Evaluation of Solid and Porous NiTi

    NASA Astrophysics Data System (ADS)

    Taheri Andani, Mohsen

    In recent years, shape memory alloys (SMAs) have entered a wide range of engineering applications in fields such as aerospace and medical applications. Nickel-titanium (NiTi) is the most commonly used SMAs due to its excellent functional characteristics (shape memory effect and superelasticity behavior). These properties are based on a solid-solid phase transformation between martensite and austenite. Beside these two characteristics, low stiffness, biocompatibility and corrosion properties of NiTi make it an attractive candidate for biomedical applications (e.g., bone plates, bone screws, and vascular stents). It is well know that manufacturing and processing of NiTi is very challenging. The functional properties of NiTi are significantly affected by the impurity level and due to the high titanium content, NiTi are highly reactive. Therefore, high temperature processed parts through methods such as melting and casting which result in increased impurity levels have inadequate structural and functional properties. Furthermore, high ductility and elasticity of NiTi, adhesion, work hardening and spring back effects make machining quite challenging. These unfavorable effects for machining cause significant tool wear along with decreasing the quality of work piece. Recently, additive manufacturing (AM) has gained significant attention for manufacturing NiTi. Since AM can create a part directly from CAD data, it is predicted that AM can overcome most of the manufacturing difficulties. This technique provides the possibility of fabricating highly complex parts, which cannot be processed by any other methods. Curved holes, designed porosity, and lattice like structures are some examples of mentioned complex parts. This work investigates manufacturing superelastic NiTi by selective laser melting (SLM) technique (using PXM by Phenix/3D Systems). An extended experimental study is conducted on the effect of subsequent heat treatments with different aging conditions on phase

  17. Experimental results on spin physics at the AGS

    SciTech Connect

    Makdisi, Y.I.

    1986-01-01

    The AGS ran with polarized protons towards the end of 1985 and through the first two months of 1986. This comprised commissioning periods interleaved with two runs for physics at 13.5 GeV/c with beam polarization of 50 to 60%, and 18.5 GeV/c with an average beam polarization of 40%. Later, the AGS polarized beam reached peak energy of 22 GeV/c and polarization of 46%. This article describes the various spin related experimental efforts since the VI Symposium at Marseille. These will be grouped into those using unpolarized beams and the rest are the polarized proton beam users. Afterwards the future of the program is described as extensions of current experiments in addition to other measurements that are yet to be proposed.

  18. Experimental results from an airborne static Fourier transform imaging spectrometer.

    PubMed

    Ferrec, Yann; Taboury, Jean; Sauer, Hervé; Chavel, Pierre; Fournet, Pierre; Coudrain, Christophe; Deschamps, Joël; Primot, Jérôme

    2011-10-20

    A high étendue static Fourier transform spectral imager has been developed for airborne use. This imaging spectrometer, based on a Michelson interferometer with rooftop mirrors, is compact and robust and benefits from a high collection efficiency. Experimental airborne images were acquired in the visible domain. The processing chain to convert raw images to hyperspectral data is described, and airborne spectral images are presented. These experimental results show that the spectral resolution is close to the one expected, but also that the signal to noise ratio is limited by various phenomena (jitter, elevation fluctuations, and one parasitic image). We discuss the origin of those limitations and suggest solutions to circumvent them. PMID:22015418

  19. Design and experimental results for the S814 airfoil

    SciTech Connect

    Somers, D.M.

    1997-01-01

    A 24-percent-thick airfoil, the S814, for the root region of a horizontal-axis wind-turbine blade has been designed and analyzed theoretically and verified experimentally in the low-turbulence wind tunnel of the Delft University of Technology Low Speed Laboratory, The Netherlands. The two primary objectives of high maximum lift, insensitive to roughness, and low profile drag have been achieved. The constraints on the pitching moment and the airfoil thickness have been satisfied. Comparisons of the theoretical and experimental results show good agreement with the exception of maximum lift which is overpredicted. Comparisons with other airfoils illustrate the higher maximum lift and the lower profile drag of the S814 airfoil, thus confirming the achievement of the objectives.

  20. Titanium as reactor material for SCWO applications. First experimental results

    SciTech Connect

    Boukis, N.; Friedrich, C.; Dinjus, E.

    1998-12-31

    According to literature data, nickel base alloys are not sufficiently corrosion resistant in chloride bearing SCWO environments. Titanium was proposed several times as a suitable material for the construction of a corrosion resistant reactor. Titanium does not show the required mechanical strength for high temperature high pressure applications and it can only be used to form liners for an SCWO apparatus. Therefore, pressure tubes made of alloy 625 were lined with titanium grade 2. Additionally corrosion tests with coupons made of titanium grades 2, 5, 7, 12 and {beta}-C were performed. The coupons were placed inside an alumina-lined reactor. Materials were exposed to simulated SCWO feeds consisting of water, oxygen and HCl, H{sub 2}SO{sub 4}, or H{sub 3}PO{sub 4}. Experimental temperatures were up to 600 C, pressures up to 27 MPa and experimental times up to 200 hours. Corrosion in chloride containing solution is low. In the presence of sulfate or phosphate, corrosion of titanium grade 2 becomes severe. For these environments an upper limit of the corrosion rate could be estimated.

  1. Experimental study of radiometric forces with comparison to computational results

    NASA Astrophysics Data System (ADS)

    Selden, Nathaniel P.

    A study of the radiometric forces on heated plates has been conducted both experimentally and computationally. The experiments were carried out at USC in two vacuum chambers up to a maximum pressure of 6 Pa for various carrier gases. The computations were performed with both the DSMC and ES-BGK methods for a 2-D gas flow over a comparable range of pressures. It is shown that the radiometric devices provide maximum force at a Knudsen number approximating 0.1. Of the various gases tested, helium provides the largest peak force. Qualitatively, the experimental data and computational results are similar. A lack of experimental data on gas-surface accommodation and flow three-dimensionality yields up to a 40% difference in the magnitude of the measured and computed forces, but it is shown that this discrepancy can be used to predict accommodation values. Comparison of four geometric configurations has shown that the effect of the area is significant at pressures up to where the force is maximum. It is also demonstrated that the size of the chamber in which the radiometer resides is of primary importance, where the chamber dimensions are inversely related to the generated force. Finally, simulation of multi-vane configurations have shown that the optimal spacing of vanes can be tailored for specific uses; for maximum force production a tight spacing should be used, while maximum efficiency requires spacing on the order of a vane dimension. While the results so far are encouraging, they are far from complete. Further improvements would include: a new experimental setup to reduce uncertainty with highly accurate temperature control and measurement, an in situ way to prepare the surface as well as measure its cleanliness, and an in depth iterative computational study observing the impact of multiple radiometer vanes at numerous seperations.

  2. D-optimal experimental designs to test for departure from additivity in a fixed-ratio mixture ray.

    PubMed

    Coffey, Todd; Gennings, Chris; Simmons, Jane Ellen; Herr, David W

    2005-12-01

    Traditional factorial designs for evaluating interactions among chemicals in a mixture may be prohibitive when the number of chemicals is large. Using a mixture of chemicals with a fixed ratio (mixture ray) results in an economical design that allows estimation of additivity or nonadditive interaction for a mixture of interest. This methodology is extended easily to a mixture with a large number of chemicals. Optimal experimental conditions can be chosen that result in increased power to detect departures from additivity. Although these designs are used widely for linear models, optimal designs for nonlinear threshold models are less well known. In the present work, the use of D-optimal designs is demonstrated for nonlinear threshold models applied to a fixed-ratio mixture ray. For a fixed sample size, this design criterion selects the experimental doses and number of subjects per dose level that result in minimum variance of the model parameters and thus increased power to detect departures from additivity. An optimal design is illustrated for a 2:1 ratio (chlorpyrifos:carbaryl) mixture experiment. For this example, and in general, the optimal designs for the nonlinear threshold model depend on prior specification of the slope and dose threshold parameters. Use of a D-optimal criterion produces experimental designs with increased power, whereas standard nonoptimal designs with equally spaced dose groups may result in low power if the active range or threshold is missed. PMID:16162847

  3. Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Manogharan, Guha; Yelamanchi, Bharat; Aman, Ronald; Mahbooba, Zaynab

    2016-03-01

    Over the years, many studies have been conducted to study and analyze the grain structures of metal alloys during additive manufacturing to improve mechanical properties. In particular, columnar grains are observed predominantly during rapid solidification of molten metal. This leads to lower mechanical properties and requires expensive secondary heat-treatment processes. This study is aimed at disrupting the formation of columnar grain growth during rapid solidification using ultrasonic vibration and analyzes the effects on grain structure and mechanical properties. A gas-metal arc welder mounted on a Rep-Rap-based low-cost metal 3 Dimension printer was used to deposit ER70S-6 mild steel layers on a plate. A contact-type ultrasonic transducer with a control system to vary the frequency and power of the vibration was used. The effects of ultrasonic vibration were determined from the statistical analysis of microstructure and micro-indentation techniques on the deposited layer and heat-affected zone. It was found that both frequency and interaction between frequency and power had significant impact on the refinement of average grain size up to 10.64% and increased the number of grains by approximately 41.78%. Analysis of micro-indentation tests showed that there was an increase of approximately 14.30% in micro-hardness due to the applied frequency during rapid solidification. A pole diagram shows that application of vibration causes randomization of grain orientation. Along with the results from this study, further efforts in modeling and experimentation of multi-directional vibrations would lead to a better understanding of disrupting columnar grains in applications that use mechanical vibrations, such as welding, directed energy deposition, brazing, etc.

  4. Comparison of Calculated and Experimental Results for a Boiling/Condensing Experimental Facility

    SciTech Connect

    Carbajo, Juan J; McDuffee, Joel Lee; Felde, David K

    2016-01-01

    A new experimental facility for materials irradiation and testing at the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) is being developed. Details of this facility have been presented before [1, 2]. A prototype of this facility, the Thermo-Syphon Test Loop (TSTL) has been built and experimental data have been obtained and analyzed [3, 4]. Pre-test calculations for this facility with the RELAP5-3D code [5] have been presented previously [6] as well as other calculations [7, 8] with the TRACE code [9]. The results of both codes were very different [7]. RELAP5-3D predicted much higher pressures and temperatures than TRACE. This paper compares calculated results with the TSTL experimental data.

  5. Comparison of computational and experimental results for a supercritical airfoil

    NASA Technical Reports Server (NTRS)

    Rivers, Melissa B.; Wahls, Richard A.

    1994-01-01

    A computational investigation was performed to study the flow over a supercritical airfoil model. Solutions were obtained for steady-state transonic flow conditions using a thin-layer Navier-Stokes flow solver. The results from this computational study were compared with time-averaged experimental data obtained over a wide Reynolds number range at transonic speeds in the Langley 0.3-Meter Transonic Cryogenic Tunnel. Comparisons were made at a nominal Mach number of 0.72 and at Reynolds numbers ranging from 6 x 10(exp 6) to 35 x 10(exp 6).

  6. ANOVA parameters influence in LCF experimental data and simulation results

    NASA Astrophysics Data System (ADS)

    Delprete, C.; Sesanaa, R.; Vercelli, A.

    2010-06-01

    The virtual design of components undergoing thermo mechanical fatigue (TMF) and plastic strains is usually run in many phases. The numerical finite element method gives a useful instrument which becomes increasingly effective as the geometrical and numerical modelling gets more accurate. The constitutive model definition plays an important role in the effectiveness of the numerical simulation [1, 2] as, for example, shown in Figure 1. In this picture it is shown how a good cyclic plasticity constitutive model can simulate a cyclic load experiment. The component life estimation is the subsequent phase and it needs complex damage and life estimation models [3-5] which take into account of several parameters and phenomena contributing to damage and life duration. The calibration of these constitutive and damage models requires an accurate testing activity. In the present paper the main topic of the research activity is to investigate whether the parameters, which result to be influent in the experimental activity, influence the numerical simulations, thus defining the effectiveness of the models in taking into account of all the phenomena actually influencing the life of the component. To obtain this aim a procedure to tune the parameters needed to estimate the life of mechanical components undergoing TMF and plastic strains is presented for commercial steel. This procedure aims to be easy and to allow calibrating both material constitutive model (for the numerical structural simulation) and the damage and life model (for life assessment). The procedure has been applied to specimens. The experimental activity has been developed on three sets of tests run at several temperatures: static tests, high cycle fatigue (HCF) tests, low cycle fatigue (LCF) tests. The numerical structural FEM simulations have been run on a commercial non linear solver, ABAQUS®6.8. The simulations replied the experimental tests. The stress, strain, thermal results from the thermo structural FEM

  7. Large aperture spatial heterodyne imaging spectrometer: Principle and experimental results

    NASA Astrophysics Data System (ADS)

    Xiangli, Bin; Cai, Qisheng; Du, Shusong

    2015-12-01

    A large aperture spatial heterodyne imaging spectrometer (LASHIS) is proposed. It is a kind of pushbroom Fourier transform ultraspectral imager with no moving parts. This imaging spectrometer, based on a Sagnac lateral shearing interferometer combined with a pair of gratings, has the advantages of high spectral resolution, high throughput and robustness. The principle of LASHIS and its spectral retrieval method are introduced. The processing chain to convert raw images to ultraspectral datacube is also described. Experimental results demonstrate the high resolving power of LASHIS with the emission spectrum of a low pressure sodium lamp.

  8. Experimental and simulational result multipactors in 112 MHz QWR injector

    SciTech Connect

    Xin, T.; Ben-Zvi, I.; Belomestnykh, S.; Brutus, J. C.; Skaritka, J.; Wu, Q.; Xiao, B.

    2015-05-03

    The first RF commissioning of 112 MHz QWR superconducting electron gun was done in late 2014. The coaxial Fundamental Power Coupler (FPC) and Cathode Stalk (stalk) were installed and tested for the first time. During this experiment, we observed several multipacting barriers at different gun voltage levels. The simulation work was done within the same range. The comparison between the experimental observation and the simulation results are presented in this paper. The observations during the test are consisted with the simulation predictions. We were able to overcome most of the multipacting barriers and reach 1.8 MV gun voltage under pulsed mode after several round of conditioning processes.

  9. Sheet Hydroforming Process Numerical Model Improvement Through Experimental Results Analysis

    NASA Astrophysics Data System (ADS)

    Gabriele, Papadia; Antonio, Del Prete; Alfredo, Anglani

    2010-06-01

    The increasing application of numerical simulation in metal forming field has helped engineers to solve problems one after another to manufacture a qualified formed product reducing the required time [1]. Accurate simulation results are fundamental for the tooling and the product designs. The wide application of numerical simulation is encouraging the development of highly accurate simulation procedures to meet industrial requirements. Many factors can influence the final simulation results and many studies have been carried out about materials [2], yield criteria [3] and plastic deformation [4,5], process parameters [6] and their optimization. In order to develop a reliable hydromechanical deep drawing (HDD) numerical model the authors have been worked out specific activities based on the evaluation of the effective stiffness of the blankholder structure [7]. In this paper after an appropriate tuning phase of the blankholder force distribution, the experimental activity has been taken into account to improve the accuracy of the numerical model. In the first phase, the effective capability of the blankholder structure to transfer the applied load given by hydraulic actuators to the blank has been explored. This phase ended with the definition of an appropriate subdivision of the blankholder active surface in order to take into account the effective pressure map obtained for the given loads configuration. In the second phase the numerical results obtained with the developed subdivision have been compared with the experimental data of the studied model. The numerical model has been then improved, finding the best solution for the blankholder force distribution.

  10. Experimental additions of aluminum sulfateand ammonium nitrate to in situ mesocosms toreduce cyanobacterial biovolume and microcystinconcentration

    USGS Publications Warehouse

    Harris, Theodore D.; Wilhelm, Frank M.; Graham, Jennifer L.; Loftin, Keith A.

    2014-01-01

    Recent studies suggest that nitrogen additions to increase the total nitrogen:total phosphorus (TN:TP) ratio may reduce cyanobacterial biovolume and microcystin concentration in reservoirs. In systems where TP is >100 μg/L, however, nitrogen additions to increase the TN:TP ratio could cause ammonia, nitrate, or nitrite toxicity to terrestrial and aquatic organisms. Reducing phosphorus via aluminum sulfate (alum) may be needed prior to nitrogen additions aimed at increasing the TN:TP ratio.We experimentally tested this sequential management approach in large in situ mesocosms (70.7 m3) to examine effects on cyanobacteria and microcystin concentration. Because alum removes nutrients and most seston from the water column, alum treatment reduced both TN and TP, leaving post-treatment TN:TP ratios similar to pre-treatment ratios. Cyanobacterial biovolume was reduced after alum addition, but the percent composition (i.e., relative) cyanobacterial abundance remained unchanged. A single ammonium nitrate (nitrogen) addition increased the TN:TP ratio 7-fold. After the TN:TP ratio was >50 (by weight), cyanobacterial biovolume and abundance were reduced, and chrysophyte and cryptophyte biovolume and abundance increased compared to the alum treatment. Microcystin was not detectable until the TN:TP ratio was <50. Although both treatments reduced cyanobacteria, only the nitrogen treatment seemed to stimulate energy flow from primary producers to zooplankton, which suggests that combining alum and nitrogen treatments may be a viable in-lake management strategy to reduce cyanobacteria and possibly microcystin concentrations in high-phosphorus systems. Additional studies are needed to define best management practices before combined alum and nitrogen additions are implemented as a reservoir management strategy.

  11. D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

    EPA Science Inventory

    Humans are exposed to mixtures of environmental compounds. A regulatory assumption is that the mixtures of chemicals act in an additive manner. However, this assumption requires experimental validation. Traditional experimental designs (full factorial) require a large number of e...

  12. Single And Double Pulse Irradiation And Comparison With Experimental Results

    SciTech Connect

    Fornarini, L.; Fantoni, R.; Colao, F.; Santagata, A.; Teghil, R.

    2009-09-27

    A theoretical model of laser ablation has been previously developed and applied to Laser Induced Breakdown Spectroscopy (LIBS) analysis of bronzes with the aim to improve quantitative results and to focus on problems arising in the interpretation of experimental data. The model describes laser-solid matter interaction, plume expansion, plasma formation and laser-plasma interaction. A two temperature approach has been also introduced to take into account the initial temperature dynamics of the alloy surface upon ultra-short laser irradiation. We examined various target compositions, typical of archaeological artworks, and different laser characteristics such as wavelength (355 nm, 530 nm, 1064 nm) and pulse duration (8 ns, 250 fs). In this work, the model has been extended to simulate double pulse LIBS configuration in order to clarify the mechanism involved in the process and for better interpreting the experimental data. Plasma composition, relevant parameters (temperature, electron density) and their kinetic evolutions have been measured. Results have been compared with the simulation obtained using the same irradiation conditions and set of targets.

  13. Atmospheric turbulence correction using digital holographic detection: experimental results.

    PubMed

    Marron, Joseph C; Kendrick, Richard L; Seldomridge, Nathan; Grow, Taylor D; Höft, Thomas A

    2009-07-01

    The performance of long distance imaging systems is typically degraded by phase errors imparted by atmospheric turbulence. In this paper we apply coherent imaging methods to determine, and remove, these phase errors by digitally processing coherent recordings of the image data. In this manner we are able to remove the effects of atmospheric turbulence without needing a conventional adaptive optical system. Digital holographic detection is used to record the coherent, complex-valued, optical field for a series of atmospheric and object realizations. Correction of atmospheric phase errors is then based on maximizing an image sharpness metric to determine the aberrations present and correct the underlying image. Experimental results that demonstrate image recovery in the presence of turbulence are presented. Results obtained with severe turbulence that gives rise to anisoplanatism are also presented. PMID:19582079

  14. Electrical and thermal behavior of unsaturated soils: experimental results

    NASA Astrophysics Data System (ADS)

    Nouveau, Marie; Grandjean, Gilles; Leroy, Philippe; Philippe, Mickael; Hedri, Estelle; Boukcim, Hassan

    2016-05-01

    When soil is affected by a heat source, some of its properties are modified, and in particular, the electrical resistivity due to changes in water content. As a result, these changes affect the thermal properties of soil, i.e., its thermal conductivity and diffusivity. We experimentally examine the changes in electrical resistivity and thermal conductivity for four soils with different grain size distributions and clay content over a wide range of temperatures, from 20 to 100 °C. This temperature range corresponds to the thermal conditions in the vicinity of a buried high voltage cable or a geothermal system. Experiments were conducted at the field scale, at a geothermal test facility, and in the laboratory using geophysical devices and probing systems. The results show that the electrical resistivity decreases and the thermal conductivity increases with temperature up to a critical temperature depending on soil types. At this critical temperature, the air volume in the pore space increases with temperature, and the resulting electrical resistivity also increases. For higher temperatures , the thermal conductivity increases sharply with temperature up to a second temperature limit. Beyond it, the thermal conductivity drops drastically. This limit corresponds to the temperature at which most of the water evaporates from the soil pore space. Once the evaporation is completed, the thermal conductivity stabilizes. To explain these experimental results, we modeled the electrical resistivity variations with temperature and water content in the temperature range 20 - 100°C, showing that two critical temperatures influence the main processes occurring during heating at temperatures below 100 °C.

  15. Modeling of rock friction 1. Experimental results and constitutive equations

    USGS Publications Warehouse

    Dieterich, J.H.

    1979-01-01

    Direct shear experiments on ground surfaces of a granodiorite from Raymond, California, at normal stresses of ??6 MPa demonstrate that competing time, displacement, and velocity effects control rock friction. It is proposed that the strength of the population of points of contacts between sliding surfaces determines frictional strength and that the population of contacts changes continuously with displacements. Previous experiments demonstrate that the strength of the contacts increases with the age of the contacts. The present experiments establish that a characteristic displacement, proportional to surface roughness, is required to change the population of contacts. Hence during slip the average age of the points of contact and therefore frictional strength decrease as slip velocity increases. Displacement weakening and consequently the potential for unstable slip occur whenever displacement reduces the average age of the contacts. In addition to this velocity dependency, which arises from displacement dependency and time dependency, the experiments also show a competing but transient increase in friction whenever slip velocity increases. Creep of the sliding surface at stresses below that for steady state slip is also observed. Constitutive relationships are developed that permit quantitative simulation of the friction versus displacement data as a function of surface roughness and for different time and velocity histories. Unstable slip in experiments is controlled by these constitutive effects and by the stiffness of the experimental system. It is argued that analogous properties control earthquake instability. Copyright ?? 1979 by the American Geophysical Union.

  16. Non-shock initiation model for explosive families : experimental results.

    SciTech Connect

    Anderson, Mark U.; Jensen, Charles B.; Todd, Steven N.; Hugh, Chance G.; Caipen, Terry L.

    2010-03-01

    The 'DaMaGe-Initiated-Reaction' (DMGIR) computational model has been developed to predict the response of high explosives to non-shock mechanical insults. The distinguishing feature of this model is the introduction of a damage variable, which relates the evolution of damage to the initiation of a reaction in the explosive, and its growth to detonation. Specifically designed experiments were used to study the initiation process of each explosive family with embedded shock sensors and optical diagnostics. The experimental portion of this model development began with a study of PBXN-5 to develop DMGIR model coefficients for the rigid plastic bonded family, followed by studies of the cast, and bulk-moldable explosive families. The experimental results show an initiation mechanism that is related to input energy and material damage, with well defined initiation thresholds for each explosive family. These initiation details will extend the predictive capability of the DMGIR model from the rigid family into the cast and bulk-moldable families.

  17. Registration of multimodal brain images: some experimental results

    NASA Astrophysics Data System (ADS)

    Chen, Hua-mei; Varshney, Pramod K.

    2002-03-01

    Joint histogram of two images is required to uniquely determine the mutual information between the two images. It has been pointed out that, under certain conditions, existing joint histogram estimation algorithms like partial volume interpolation (PVI) and linear interpolation may result in different types of artifact patterns in the MI based registration function by introducing spurious maxima. As a result, the artifacts may hamper the global optimization process and limit registration accuracy. In this paper we present an extensive study of interpolation-induced artifacts using simulated brain images and show that similar artifact patterns also exist when other intensity interpolation algorithms like cubic convolution interpolation and cubic B-spline interpolation are used. A new joint histogram estimation scheme named generalized partial volume estimation (GPVE) is proposed to eliminate the artifacts. A kernel function is involved in the proposed scheme and when the 1st order B-spline is chosen as the kernel function, it is equivalent to the PVI. A clinical brain image database furnished by Vanderbilt University is used to compare the accuracy of our algorithm with that of PVI. Our experimental results show that the use of higher order kernels can effectively remove the artifacts and, in cases when MI based registration result suffers from the artifacts, registration accuracy can be improved significantly.

  18. Physical mechanism of comet outbursts - An experimental result

    NASA Technical Reports Server (NTRS)

    Hartmann, William K.

    1993-01-01

    Attention is given to an experimental investigation of the physical mechanism of comet outbursts which is consistent with the general picture of mantle presence on comets and clarifies the relation of mantles to eruptive activity. The experiment and closeup observation of Comet P/Halley suggest a result different from most mathematical models in that the release of gas pressure does not occur only from uniform gas flow out of the entire surface. In some active comets near perihelion within a few AU of the sun, gas production rates and disturbance of the surface may be so high that the outflow is nearly continuous, with the regolith being entirely stripped away, as in many of the models. The present model provides a cyclic eruption and recharge mechanism which is lacking in most other models.

  19. Beta decay and the origins of biological chirality - Experimental results

    NASA Technical Reports Server (NTRS)

    Gidley, D. W.; Rich, A.; Van House, J.; Zitzewitz, P. W.

    1982-01-01

    Preliminary experimental results are presented of an investigation of the possible role of preferential radiolysis by electrons emitted in the beta decay of radionuclides, a parity-nonconserving process, in the universal causation of the optical activity of biological compounds. Experiments were designed to measure the asymmetry in the production of triplet positronium upon the bombardment of an amino acid powder target by a collimated beam of positrons as positron helicity or target chirality is reversed. No asymmetry down to a level of 0.0007 is found in experiments on the D and L forms of cystine and tryptophan, indicating an asymmetry in positronium formation cross section of less than 0.01, while an asymmetry of 0.0031 is found for leucine, corresponding to a formation cross section asymmetry of about 0.04

  20. Robotic follower experimentation results: ready for FCS increment I

    NASA Astrophysics Data System (ADS)

    Jaczkowski, Jeffrey J.

    2003-09-01

    Robotics is a fundamental enabling technology required to meet the U.S. Army's vision to be a strategically responsive force capable of domination across the entire spectrum of conflict. The U. S. Army Research, Development and Engineering Command (RDECOM) Tank Automotive Research, Development & Engineering Center (TARDEC), in partnership with the U.S. Army Research Laboratory, is developing a leader-follower capability for Future Combat Systems. The Robotic Follower Advanced Technology Demonstration (ATD) utilizes a manned leader to provide a highlevel proofing of the follower's path, which operates with minimal user intervention. This paper will give a programmatic overview and discuss both the technical approach and operational experimentation results obtained during testing conducted at Ft. Bliss, New Mexico in February-March 2003.

  1. Object impedance control for cooperative manipulation - Theory and experimental results

    NASA Technical Reports Server (NTRS)

    Schneider, Stanley A.; Cannon, Robert H., Jr.

    1989-01-01

    The dynamic control module being developed in the Dynamic and Strategic Control of Cooperative Manipulators (DASCCOM) project at the Stanford University Aerospace Robotics Laboratory is described. First, the cooperative manipulation problem is analyzed from a systems perspective, and the desirable features of a control system for cooperative manipulation are discussed. Next, a control policy is developed that enforces a controlled impedance not of the individual arm endpoints, but of the manipulated object itself. A parallel implementation for a multiprocessor system is presented. The controller fully compensates for the system dynamics and directly controls the object internal forces. Most importantly, it presents a simple, powerful, intuitive interface to the strategic controller. Experimental results for a dual two-link arm robotic system are presented to verify the controllers performance, for both free-motion slews and environmental contact.

  2. Preliminary Experimental Results from a MARS Micro-CT System

    PubMed Central

    He, Peng; Yu, Hengyong; Thayer, Patrick; Jin, Xin; Xu, Qiong; Bennett, James; Tappenden, Rachael; Wei, Biao; Goldstein, Aaron; Renaud, Peter; Butler, Anthony; Butler, Phillip; Wang, Ge

    2013-01-01

    The Medipix All Resolution System (MARS) system is a commercial spectral/multi-energy micro-CT scanner designed and assembled by the MARS Bioimaging, Ltd. in New Zealand. This system utilizes the state-of-the-art Medipix photon-counting, energy-discriminating detector technology developed by a collaboration based at European Organization for Nuclear Research (CERN). In this paper, we report our preliminary experimental results using this system, including geometrical alignment, photon energy characterization, protocol optimization, and spectral image reconstruction. We produced our scan datasets with a multi-material phantom, and then applied ordered subset-simultaneous algebraic reconstruction technique (OS-SART) to reconstruct images in different energy ranges and principal component analysis (PCA) to evaluate spectral deviation between the energy ranges. PMID:22635175

  3. Selected experimental results from heavy-ion collisions at LHC

    DOE PAGESBeta

    Singh, Ranbir; Kumar, Lokesh; Netrakanti, Pawan Kumar; Mohanty, Bedangadas

    2013-01-01

    We reviewmore » a subset of experimental results from the heavy-ion collisions at the Large Hadron Collider (LHC) facility at CERN. Excellent consistency is observed across all the experiments at the LHC (at center of mass energysNN=2.76 TeV) for the measurements such as charged particle multiplicity density, azimuthal anisotropy coefficients, and nuclear modification factor of charged hadrons. Comparison to similar measurements from the Relativistic Heavy Ion Collider (RHIC) at lower energy (sNN=200 GeV) suggests that the system formed at LHC has a higher energy density and larger system size and lives for a longer time. These measurements are compared to model calculations to obtain physical insights on the properties of matter created at the RHIC and LHC.« less

  4. Solving and Learning Soft Temporal Constraints: Experimental Setting and Results

    NASA Technical Reports Server (NTRS)

    Rossi, F.; Sperduti, A.; Venable, K. B.; Khatib, L.; Morris, P.; Morris, R.; Clancy, Daniel (Technical Monitor)

    2002-01-01

    Soft temporal constraints problems allow to describe in a natural way scenarios where events happen over time and preferences are associated to event distances and durations. However, sometimes such local preferences are difficult to set, and it may be easier instead to associate preferences to some complete solutions of the problem. Machine learning techniques can be useful in this respect. In this paper we describe two solvers (one more general and the other one more efficient) for tractable subclasses of soft temporal problems, and we show some experimental results. The random generator used to build the problems on which tests are performed is also described. We also compare the two solvers highlighting the tradeoff between performance and representational power. Finally, we present a learning module and we show its behavior on randomly-generated examples.

  5. Experimental results to study astrophysical plasma jets using Intense Lasers

    NASA Astrophysics Data System (ADS)

    Loupias, B.; Gregory, C. D.; Falize, E.; Waugh, J.; Seiichi, D.; Pikuz, S.; Kuramitsu, Y.; Ravasio, A.; Bouquet, S.; Michaut, C.; Barroso, P.; Rabec Le Gloahec, M.; Nazarov, W.; Takabe, H.; Sakawa, Y.; Woolsey, N.; Koenig, M.

    2009-08-01

    We present experimental results of plasma jet, interacted with an ambient medium, using intense lasers to investigate the complex features of astrophysical jets. This experiment was performed in France at the LULI facility, Ecole Polytechnique, using one long pulse laser to generate the jet and a short pulse laser to probe it by proton radiography. A foam filled cone target was used to generate high velocity plasma jet, and a gas jet nozzle produced the well known ambient medium. Using visible pyrometry and interferometry, we were able to measure the jet velocity and electronic density. We get a panel of measurements at various gas density and time delay. From these measurements, we could underline the growth of a perturbed shape of the jet interaction with the ambient medium. The reason of this last observation is still in debate and will be presented in the article.

  6. Arm-free paraplegic standing--Part II: Experimental results.

    PubMed

    Matjacić, Z; Bajd, T

    1998-06-01

    In Part I, we proposed an approach for restoring unsupported standing to thoracic-level paraplegics. The theoretical analysis and simulation of an underactuated double inverted pendulum, representing the standing subject, showed that arm-free standing might be achieved. Here in Part II, we present the mechanical apparatus which we used in our experiments and experimental results from tests of the balance-control strategy. We demonstrate that an intact and a paraplegic subject could perform quiet standing with the ankle stiffness set to 8 Nm/degree or even less (the intact subject). Both were also able to recover from disturbances, imposed by the artificial ankle joint of the apparatus. Introducing cognitive auditory feedback greatly improved the standing abilities of both subjects. PMID:9631321

  7. Object impedance control for cooperative manipulation - Theory and experimental results

    NASA Technical Reports Server (NTRS)

    Schneider, Stanley A.; Cannon, Robert H., Jr.

    1992-01-01

    This paper presents the dynamic control module of the Dynamic and Strategic Control of Cooperating Manipulators (DASCCOM) project at Stanford University's Aerospace Robotics Laboratory. First, the cooperative manipulation problem is analyzed from a systems perspective, and the desirable features of a control system for cooperative manipulation are discussed. Next, a control policy is developed that enforces a controlled impedance not of the individual arm endpoints, but of the manipulated object itself. A parallel implementation for a multiprocessor system is presented. The controller fully compensates for the system dynamics and directly controls the object internal forces. Most importantly, it presents a simple, powerful, intuitive interface to higher level strategic control modules. Experimental results from a dual two-link-arm robotic system are used to compare the object impedance controller with other strategies, both for free-motion slews and environmental contact.

  8. Experimental Results of Rover-Based Coring and Caching

    NASA Technical Reports Server (NTRS)

    Backes, Paul G.; Younse, Paulo; DiCicco, Matthew; Hudson, Nicolas; Collins, Curtis; Allwood, Abigail; Paolini, Robert; Male, Cason; Ma, Jeremy; Steele, Andrew; Conrad, Pamela G.

    2011-01-01

    Experimental results are presented for experiments performed using a prototype rover-based sample coring and caching system. The system consists of a rotary percussive coring tool on a five degree-of-freedom manipulator arm mounted on a FIDO-class rover and a sample caching subsystem mounted on the rover. Coring and caching experiments were performed in a laboratory setting and in a field test at Mono Lake, California. Rock abrasion experiments using an abrading bit on the coring tool were also performed. The experiments indicate that the sample acquisition and caching architecture is viable for use in a 2018 timeframe Mars caching mission and that rock abrasion using an abrading bit may be feasible in place of a dedicated rock abrasion tool.

  9. Integrated radar-camera security system: experimental results

    NASA Astrophysics Data System (ADS)

    Zyczkowski, M.; Palka, N.; Trzcinski, T.; Dulski, R.; Kastek, M.; Trzaskawka, P.

    2011-06-01

    The nature of the recent military conflicts and terrorist attacks along with the necessity to protect bases, convoys and patrols have made a serious impact on the development of more effective security systems. Current widely-used perimeter protection systems with zone sensors will soon be replaced with multi-sensor systems. Multi-sensor systems can utilize day/night cameras, IR uncooled thermal cameras, and millimeter-wave radars which detect radiation reflected from targets. Ranges of detection, recognition and identification for all targets depend on the parameters of the sensors used and of the observed scene itself. In this paper two essential issues connected with multispectral systems are described. We will focus on describing the autonomous method of the system regarding object detection, tracking, identification, localization and alarm notifications. We will also present the possibility of configuring the system as a stationary, mobile or portable device as in our experimental results.

  10. Experimental investigations of the swirling flow in the conical diffuser using flow-feedback control technique with additional energy source

    NASA Astrophysics Data System (ADS)

    Tǎnasǎ, C.; Bosioc, A. I.; Susan-Resiga, R. F.; Muntean, S.

    2012-11-01

    The previous experimental and numerical investigations of decelerated swirling flows in conical diffusers have demonstrated that water injection along to the axis mitigates the pressure fluctuations associated to the precessing vortex rope [1]. However, for swirling flows similar to Francis turbines operated at partial discharge, the water jet becomes effective when the jet discharge is larger than 10% from the turbine discharge, leading to large volumetric losses when the jet is supplied from upstream the runner. As a result, it was introduced a new approach for supplying the jet by using a fraction of the discharge collected downstream the conical diffuser [2]. This is called flow-feedback control technique (FFCT) and it was investigated experimentally in order to assess its capability [3]. The FFCT approach not requires additional energy to supply the jet. Consequently, the turbine efficiency is not diminished due to the volumetric losses injected even if around 10% of the main flow is used. However, the equivalent amplitude of the pressure pulsations associated to the vortex rope decreases with 30% if 10% jet discharge is applied [3]. Using 12% water jet discharge from upstream then the equivalent amplitude of the pressure pulsations is mitigated with 70% according to Bosioc et al. [4]. In our case, an extra 2% jet discharge is required in order to obtain similar results with FFCT. This extra discharge is provided using an additional energy source. Therefore, the paper presents experimental investigation performed with FFCT with additional energy source. The experimental results obtained with this technique are compared against FFCT and the swirling flow with vortex rope, respectively.

  11. Experimental Progress and Results of a Visible Nulling Coronagraph

    NASA Technical Reports Server (NTRS)

    Samuele, Rocco; Wallace, J. Kent; Schmidtlin, Edouard; Shao, Mike; Levine, B. Martin; Fregoso, Santos

    2007-01-01

    The crux of visible exoplanet detection is overcoming significant star-planet contrast ratios on the order of 10(exp -7) to 10(exp -10)-at very small angular separations. We are developing an interferometric nulling coronagraph designed to achieve a 10(exp -6) contrast ratio at a working science bandpass of 20% visible light. Achieving large, broadband suppression requires a pseudo-achromatic phase flip, while maintaining a strict error budget. Recent results from our nulling interferometer testbed yield contrast ratios at the 1.05x10(exp -6) level, with a 15% visible bandpass. This result is at 65% of our final bandpass requirement, although limitations of our current configuration make major hardware changes essential to broadening the bandpass. We make the argument that broadening the bandpass should not necessarily adversely affect the null depth until beyond the 20% visible light level. Using the same setup we are able to reach monochromatic null depths of 1.11x10(exp -7) (?= 638 nm)averaged over three seconds. This paper will describe our experimental approach for achieving deep broadband nulls, as well as error considerations and limitations, and the most recent results for our nulling coronagraph testbed.

  12. Experimental Results for Titan Aerobot Thermo-Mechanical Subsystem Development

    NASA Technical Reports Server (NTRS)

    Hall, Jeffrey L.; Jones, J. A.; Kerzhanovich, V. V.; Lachenmeier, T.; Mahr, P.; Pauken, M.; Plett, G. A.; Smith, L.; VanLuvender, M. L.; Yavrouian, A. H.

    2006-01-01

    This paper describes experimental results from a development program focused in maturing Titan aerobot technology in the areas of mechanical and thermal subsystems. Results from four key activities are described: first, a cryogenic balloon materials development program involving coupon and cylinder tests and culminating in the fabrication and testing of an inflated 4.6 m long prototype blimp at 93 K; second, a combined lab experiment and numerical simulation effort to assess potential problems resulting from radioisotope thermal generator waste heat generation near an inflated blimp; third, an aerial deployment and inflation development program consisting of laboratory and helicopter drop tests on a near full scale (11 m long) prototype blimp; and fourth, a proof of concept experiment demonstrating the viability of using a mechanically steerable high gain antenna on a floating blimp to perform direct to Earth telecommunications from Titan. The paper provides details on all of these successful activities and discusses their impact on the overall effort to produce mature systems technology for future Titan aerobot missions.

  13. The behavior of delaminations in composite materials - experimental results

    NASA Astrophysics Data System (ADS)

    Chermoshentseva, A. S.; Pokrovskiy, A. M.; Bokhoeva, L. A.

    2016-02-01

    Delamination is one of the most common failure modes of composite materials. It may occur as a consequence of imperfections in the production process or the effects of external factors during the operational life of the composite laminates, such as the impact by foreign objects. This paper presents the results of mechanical tests and the optimum degrees of filling the composite materials (CM) with hydrophobic powder (Tarkosil T-20) depending on the latter mass concentration. The results present test samples of the CM with the underlying interlayer defects. The samples were fabricated of twenty-ply pre-preg (fiberglass or carbon fiber). The industrial grade glass is T-25 (VM) specification 6-11-380-76. The composite materials have nanosized additives in structure. The volume concentration of nanopowders is varying from 0.1% to 0.5%. This kind of research has been done for the first time.

  14. Experimental study of combustion of decane, dodecane and hexadecane with polymeric and nano-particle additives

    NASA Astrophysics Data System (ADS)

    Ghamari, Mohsen; Ratner, Albert

    2015-11-01

    Recent studies have shown that adding combustible nano-particles could have promising effects on increasing burning rate of liquid fuels. Combustible nano-particles could enhance the heat conduction and mixing within the droplet. Polymers have also higher burning rate than regular hydrocarbon fuels because of having the flame closer to the droplet surface. Therefore adding polymeric additive could have the potential to increase the burning rate. In this study, combustion of stationary fuel droplets of n-Decane, n-Dodecane and n-Hexadecane doped with different percentages of a long chain polymer and also a very fine nano carbon was examined and compared with the pure hydrocarbon behavior. In contrast with hydrocarbon droplets with no polymer addition, several zones of combustion including a slow and steady burning zone, a strong swelling zone and a final fast and fairly steady combustion zone were also detected. In addition, increasing polymer percentage resulted in a more extended swelling zone and shorter slow burning zone in addition to a shorter total burning time. Addition of nano-particles also resulted in an overall increased burning rate and shortened burning time which is due to enhanced heat conduction within the droplet.

  15. Experimental Results from a Resonant Dielectric Laser Accelerator

    NASA Astrophysics Data System (ADS)

    Yoder, Rodney; McNeur, Joshua; Sozer, Esin; Travish, Gil; Hazra, Kiran Shankar; Matthews, Brian; England, Joel; Peralta, Edgar; Wu, Ziran

    2015-04-01

    Laser-powered accelerators have the potential to operate with very large accelerating gradients (~ GV/m) and represent a path toward extremely compact colliders and accelerator technology. Optical-scale laser-powered devices based on field-shaping structures (known as dielectric laser accelerators, or DLAs) have been described and demonstrated recently. Here we report on the first experimental results from the Micro-Accelerator Platform (MAP), a DLA based on a slab-symmetric resonant optical-scale structure. As a resonant (rather than near-field) device, the MAP is distinct from other DLAs. Its cavity resonance enhances its accelerating field relative to the incoming laser fields, which are coupled efficiently through a diffractive optic on the upper face of the device. The MAP demonstrated modest accelerating gradients in recent experiments, in which it was powered by a Ti:Sapphire laser well below its breakdown limit. More detailed results and some implications for future developments will be discussed. Supported in part by the U.S. Defense Threat Reduction Agency (UCLA); U.S. Dept of Energy (SLAC); and DARPA (SLAC).

  16. Breaking the resolution limit: an exciting experimental result

    NASA Astrophysics Data System (ADS)

    Simonetti, Francesco

    2006-03-01

    For more than a century the possibility of imaging the structure of a medium with diffracting wavefields has been limited by the tradeoff between resolution and imaging depth. While long wavelengths can penetrate deep into a medium, the resolution limit precludes the possibility of observing subwavelength structures. Recent progress in microscopy has shown that by exploiting the super-oscillatory properties of evanescent fields, resolution several orders of magnitude smaller than the wavelength can be achieved so leading to Near-field Scanning Optical Microscopy. Based on a similar argument, this paper investigates the possibility of obtaining super resolution in the far-field (here far-field refers to a distance greater than λ, which would enable high resolution imaging at relatively large depth. The theoretical principles which result in the resolution limit are reviewed and a new strategy to overcome it is proposed. An advanced imaging algorithm for linear and two-dimensional array probing systems is presented and its capability of resolving targets as close as λ/3 is demonstrated experimentally, the targets being at several wavelength distance from the array. The results show that the method is superior to conventional techniques such as Synthetic Aperture Focusing, Synthetic Phased Arrays and Time Reversal.

  17. Experimental results of an iodine plasma in PEGASES gridded thruster

    NASA Astrophysics Data System (ADS)

    Grondein, Pascaline; Aanesland, Ane

    2015-09-01

    In the electric gridded thruster PEGASES, both positive and negative ions are expelled after extraction from an ion-ion plasma. This ion-ion plasma is formed downstream a localized magnetic field placed a few centimeters from the ionization region, trapping and cooling down the electron to allow a better attachment to an electronegative gas. For this thruster concept, iodine has emerged as the most attractive option. Heavy, under diatomic form and therefore good for high thrust, its low ionization threshold and high electronegativity lead to high ion-ion densities and low RF power. After the proof-of-concept of PEGASES using SF6 as propellant, we present here experimental results of an iodine plasma studied inside PEGASES thruster. At solid state at standard temperature and pressure, iodine is heated to sublimate, then injected inside the chamber where the neutral gas is heated and ionized. The whole injection system is heated to avoid deposition on surfaces and a mass flow controller allows a fine control on the neutral gas mass flow. A 3D translation stage inside the vacuum chamber allows volumetric plasma studies using electrostatic probes. The results are also compared with the global model dedicated to iodine as propellant for electric gridded thrusters. This work has been done within the LABEX Plas@par project, and received financial state aid managed by the Agence Nationale de la Recherche, as part of the programme ``Investissements d'avenir.''

  18. Experimental results of a single emittance compensation solenoidal magnet

    SciTech Connect

    Palmer, D.T.; Miller, R.H.; Wang, X.J.; Ben-Zvi, I.; Skaritka, J.

    1997-07-01

    A new iron dominated single emittance compensation solenoidal magnet was designed to be integrated with the BNL/SLAC/UCLA 1.6 cell S-Band Photocathode rf Gun. This emittance compensated photoinjector is now in operation at the Brookhaven Accelerator Test Facility. It has produced a 0.329 {+-} 0.012 pC, {tau}{sub 95%} = 10.9 psec electron bunches with a normalized rms transverse emittance of {epsilon}{sub n,rms} = 1.17 {+-} 0.16 {pi} mm mrad. POISSON field maps were used with PARMELA to optimize the emittance compensation solenoidal magnet design. Magnetic field measurements show that at the cathode plane B{sub z} {le} 10 G for a peak magnetic field of B{sub z,max} = 3 kG. Which is in agreement with POISSON simulation. A single emittance compensation solenoidal magnet will produces an initial angular momentum of the electron bunch that manifests itself in a initial magnetic emittance term that cannot be eliminated. This magnetic emittance {epsilon}{sub n,rms}{sup mag} scales as 0.010 {pi} mm mrad/G as the cathode, which is in agreement with PARMELA simulations. Experimental beam dynamics results are presented that shows relative angular rotation and spot size as a function of cathode magnetic field. These results are compared to theory.

  19. Theoretical and Experimental Results Regarding LENR/CF

    SciTech Connect

    Robert W. Bass; Wm. Stan Gleeson

    2000-11-12

    We challenge the predominant view that low-energy nuclear reactions (LENRs) are prohibited by standard quantum mechanics (QM). This view, supposedly based on standard nuclear theory, need not apply in condensed-matter environments. These considerations indicate that seemingly novel experimental evidence of rapid aneutronic bulk-process transmutation, at extraordinarily low-energy levels, in a simple electrochemical reactor, can occur. This explains: (a) induced rapid decay of radioactive thorium into stable nuclides, e.g., Cu and (b) resulting, anomalous distribution of Cu isotopes. We reexamine arguments of Peebles cited as evidence that standard QM 'forbids' cold fusion (CF). We note oversimplifications in those and present an alternative, more sophisticated calculation (see Bass, Refs. 3 through 8) demonstrating that conventional wisdom about impenetrability of the 'Coulomb barrier' fails as a result of periodic-order-induced resonance. We also examine empirical evidence. In three independent tests of an LENR electrolysis cell, using different I-V-T (current/voltage/time) protocols, the percentage of radiation reduction (RR) transmutation achieved {eta}=[23{percent}, 50{percent}, 83{percent}] versus expended energy E=[0.6535, 32.5, 74.6] (Watt-hours), obtained by numerical integration of recorded product I{center_dot}V for processing time T, provides near-perfect straight-line correlation: {eta}={alpha}{center_dot}E + {eta}{sub 0}, {alpha}=0.8105, {eta}{sub 0}=22.888, (0.65 < E < 0.75).

  20. Recent experimental results of KSTAR RF heating and current drive

    SciTech Connect

    Wang, S. J. Kim, J.; Jeong, J. H.; Kim, H. J.; Joung, M.; Bae, Y. S.; Kwak, J. G.

    2015-12-10

    The overview of KSTAR activities on ICRH, LHCD and ECH/CD including the last experimental results and future plan aiming for long-pulse high-beta plasma will be presented. Recently we achieved reasonable coupling of ICRF power to H-mode plasma through several efforts to increase system reliability. Power balance will be discussed on this experiment. LHCD is still struggling in the low power regime. Review of antenna spectrum for the higher coupling in H-mode plasma will be tried. ECH/CD provides 41 sec, 0.8 MW of heating power to support high-performance long-pulse discharge. Also, 170 GHz ECH system is integrated with the Plasma Control System (PCS) for the feedback controlling of NTM. Status and plan of ECH/CD will be discussed. Finally, helicon current drive is being prepared for the next stage of KSTAR operation. The hardware preparation and the calculation results of helicon current drive in KSTAR plasma will be discussed.

  1. Recent experimental results of KSTAR RF heating and current drive

    NASA Astrophysics Data System (ADS)

    Wang, S. J.; Kim, J.; Jeong, J. H.; Kim, H. J.; Joung, M.; Bae, Y. S.; Kwak, J. G.

    2015-12-01

    The overview of KSTAR activities on ICRH, LHCD and ECH/CD including the last experimental results and future plan aiming for long-pulse high-beta plasma will be presented. Recently we achieved reasonable coupling of ICRF power to H-mode plasma through several efforts to increase system reliability. Power balance will be discussed on this experiment. LHCD is still struggling in the low power regime. Review of antenna spectrum for the higher coupling in H-mode plasma will be tried. ECH/CD provides 41 sec, 0.8 MW of heating power to support high-performance long-pulse discharge. Also, 170 GHz ECH system is integrated with the Plasma Control System (PCS) for the feedback controlling of NTM. Status and plan of ECH/CD will be discussed. Finally, helicon current drive is being prepared for the next stage of KSTAR operation. The hardware preparation and the calculation results of helicon current drive in KSTAR plasma will be discussed.

  2. Phosphate retention in an agricultural stream using experimental additions of phosphate

    NASA Astrophysics Data System (ADS)

    Macrae, M. L.; English, M. C.; Schiff, S. L.; Stone, M. A.

    2003-12-01

    In-stream experiments involving additions of phosphate were conducted to determine the soluble reactive phosphorus (SRP) retention potential of a perennial first-order stream that drains a 2·7 km2 agricultural catchment in southern Ontario. SRP retention was determined in relation to highly elevated SRP concentrations under low flow conditions. Point source treatments of phosphate were added to three reaches of this stream during two time periods when baseline SRP concentrations were notably different (early summer and early autumn). The reaches selected varied with respect to streambed shape and gradient, direction of groundwater flow, and channel vegetation type and density. One of the three experimental stream reaches was dredged between the two sampling periods, so that all vegetation and the top 25 cm of sediments were removed.SRP retention in the stream ranged from 0·8 to 24·1 µg m-2 s-1. Dredging the stream sediments did not alter the ability of the stream to remove SRP from the water column. SRP retention over the experimental reaches was generally 5-10% of the elevated concentration (0·7-4·2 mg l-1, a factor of 8-53 above pre-experiment conditions), although low-flow conditions in the stream were conducive to retention by stream sediments. Copyright

  3. The Modern U.S. High School Astronomy Course, Its Status and Makeup II: Additional Results

    ERIC Educational Resources Information Center

    Krumenaker, Larry

    2009-01-01

    A postal survey of high school astronomy teachers strongly confirms many results of an earlier electronic survey. Additional and new results include a measure of the level of inquiry (more structured inquiry and teacher-led) in the classroom as well as data showing that more emphasis is given to traditional topics than to contemporary astronomy…

  4. Design and experimental results of coaxial circuits for gyroklystron amplifiers

    SciTech Connect

    Flaherty, M.K.E.; Lawson, W.; Cheng, J.; Calame, J.P.; Hogan, B.; Latham, P.E.; Granatstein, V.L.

    1994-12-31

    At the University of Maryland high power microwave source development for use in linear accelerator applications continues with the design and testing of coaxial circuits for gyroklystron amplifiers. This presentation will include experimental results from a coaxial gyroklystron that was tested on the current microwave test bed, and designs for second harmonic coaxial circuits for use in the next generation of the gyroklystron program. The authors present test results for a second harmonic coaxial circuit. Similar to previous second harmonic experiments the input cavity resonated at 9.886 GHz and the output frequency was 19.772 GHz. The coaxial insert was positioned in the input cavity and drift region. The inner conductor consisted of a tungsten rod with copper and ceramic cylinders covering its length. Two tungsten rods that bridged the space between the inner and outer conductors supported the whole assembly. The tube produced over 20 MW of output power with 17% efficiency. Beam interception by the tungsten rods resulted in minor damage. Comparisons with previous non-coaxial circuits showed that the coaxial configuration increased the parameter space over which stable operation was possible. Future experiments will feature an upgraded modulator and beam formation system capable of producing 300 MW of beam power. The fundamental frequency of operation is 8.568 GHz. A second harmonic coaxial gyroklystron circuit was designed for use in the new system. A scattering matrix code predicts a resonant frequency of 17.136 GHz and Q of 260 for the cavity with 95% of the outgoing microwaves in the desired TE032 mode. Efficiency studies of this second harmonic output cavity show 20% expected efficiency. Shorter second harmonic output cavity designs are also being investigated with expected efficiencies near 34%.

  5. Acoustic analysis in Mudejar-Gothic churches: experimental results.

    PubMed

    Galindo, Miguel; Zamarreño, Teófilo; Girón, Sara

    2005-05-01

    This paper describes the preliminary results of research work in acoustics, conducted in a set of 12 Mudejar-Gothic churches in the city of Seville in the south of Spain. Despite common architectural style, the churches feature individual characteristics and have volumes ranging from 3947 to 10 708 m3. Acoustic parameters were measured in unoccupied churches according to the ISO-3382 standard. An extensive experimental study was carried out using impulse response analysis through a maximum length sequence measurement system in each church. It covered aspects such as reverberation (reverberation times, early decay times), distribution of sound levels (sound strength); early to late sound energy parameters derived from the impulse responses (center time, clarity for speech, clarity, definition, lateral energy fraction), and speech intelligibility (rapid speech transmission index), which all take both spectral and spatial distribution into account. Background noise was also measured to obtain the NR indices. The study describes the acoustic field inside each temple and establishes a discussion for each one of the acoustic descriptors mentioned by using the theoretical models available and the principles of architectural acoustics. Analysis of the quality of the spaces for music and speech is carried out according to the most widespread criteria for auditoria. PMID:15957758

  6. Acoustic analysis in Mudejar-Gothic churches: Experimental results

    NASA Astrophysics Data System (ADS)

    Galindo, Miguel; Zamarreño, Teófilo; Girón, Sara

    2005-05-01

    This paper describes the preliminary results of research work in acoustics, conducted in a set of 12 Mudejar-Gothic churches in the city of Seville in the south of Spain. Despite common architectural style, the churches feature individual characteristics and have volumes ranging from 3947 to 10 708 m3. Acoustic parameters were measured in unoccupied churches according to the ISO-3382 standard. An extensive experimental study was carried out using impulse response analysis through a maximum length sequence measurement system in each church. It covered aspects such as reverberation (reverberation times, early decay times), distribution of sound levels (sound strength); early to late sound energy parameters derived from the impulse responses (center time, clarity for speech, clarity, definition, lateral energy fraction), and speech intelligibility (rapid speech transmission index), which all take both spectral and spatial distribution into account. Background noise was also measured to obtain the NR indices. The study describes the acoustic field inside each temple and establishes a discussion for each one of the acoustic descriptors mentioned by using the theoretical models available and the principles of architectural acoustics. Analysis of the quality of the spaces for music and speech is carried out according to the most widespread criteria for auditoria. .

  7. Preliminary Experimental Result of Magnetic Reconnection in Laboratory Plasma

    NASA Astrophysics Data System (ADS)

    Zhang, S. B.; Xie, J. L.; Hu, G. H.; Li, H.; Huang, G. L.; Liu, W. D.

    2011-05-01

    Magnetic reconnection is one of the most important physical processes in astrophysical plasmas. Lots of theoretical works, numerical simulations and observations have been done. Some experimental programs have been activated to investigate the basic mechanisms of magnetic reconnection. In order to investigate the electron dynamic near the electron diffusion region in magnetic reconnection process, an upgrade is accomplished in the LMP (Linear magnetic plasmas) device at University of Science and Technology of China. The magnetic field of reconnection is produced by passing two identical currents axially through two copper plates. Magnetic field and parallel electric field are measured by magnetic probes and emissive probes, respectively. The existence of a large electric field related to the reconnection process is verified. The plasma is driven by electric field and magnetic field, so the magnetic reconnection appears. The magnitude of axial current is found to scale with the number of passing particles. In the configuration of current bars, passing particles are even more and our measured axial current is about 10 A. Magnetic flux doesn't pile up because of the parameter region in our case, which is consistent with the result of numerical simulation.

  8. Experimental results on atomic oxygen corrosion of silver

    NASA Technical Reports Server (NTRS)

    Fromhold, Albert T.

    1988-01-01

    The results of an experimental study of the reaction kinetics of silver with atomic oxygen in 10 degree increments over the temperature range of 0 to 70 C is reported. The silver specimens, of the order of 10,000 A in thickness, were prepared by thermal evaporation onto 3 inch diameter polished silicon wafers. There were later sliced into pieces having surface areas of the order of 1/4 to 1/2 square inch. Atomic oxygen was generated by a gas discharge in a commercial plasmod asher operating in the megahertz frequency range. The sample temperature within the chamber was controlled by means of a thermoelectric unit. Exposure of the silver specimens to atomic oxygen was incremental, with oxide film thickness measurements being carried out between exposures by means of an automated ellipsometer. For the early growth phase, the data can be described satisfactorily by a logarithmic growth law: the oxide film thickness increases as the logarithm of the exposure time. Furthermore, the oxidation process is thermally activated, the rate increasing with increasing temperature. However, the empirical activation energy parameter deduced from Arrhenius plots is quite low, being of the order of 0.1 eV.

  9. Energy-resolved computed tomography: first experimental results

    NASA Astrophysics Data System (ADS)

    Shikhaliev, Polad M.

    2008-10-01

    First experimental results with energy-resolved computed tomography (CT) are reported. The contrast-to-noise ratio (CNR) in CT has been improved with x-ray energy weighting for the first time. Further, x-ray energy weighting improved the CNR in material decomposition CT when applied to CT projections prior to dual-energy subtraction. The existing CT systems use an energy (charge) integrating x-ray detector that provides a signal proportional to the energy of the x-ray photon. Thus, the x-ray photons with lower energies are scored less than those with higher energies. This underestimates contribution of lower energy photons that would provide higher contrast. The highest CNR can be achieved if the x-ray photons are scored by a factor that would increase as the x-ray energy decreases. This could be performed by detecting each x-ray photon separately and measuring its energy. The energy selective CT data could then be saved, and any weighting factor could be applied digitally to a detected x-ray photon. The CT system includes a photon counting detector with linear arrays of pixels made from cadmium zinc telluride (CZT) semiconductor. A cylindrical phantom with 10.2 cm diameter made from tissue-equivalent material was used for CT imaging. The phantom included contrast elements representing calcifications, iodine, adipose and glandular tissue. The x-ray tube voltage was 120 kVp. The energy selective CT data were acquired, and used to generate energy-weighted and material-selective CT images. The energy-weighted and material decomposition CT images were generated using a single CT scan at a fixed x-ray tube voltage. For material decomposition the x-ray spectrum was digitally spilt into low- and high-energy parts and dual-energy subtraction was applied. The x-ray energy weighting resulted in CNR improvement of calcifications and iodine by a factor of 1.40 and 1.63, respectively, as compared to conventional charge integrating CT. The x-ray energy weighting was also applied

  10. Experimental results for an experimental condensation heat exchanger with a spiral minichanel tube. Comparison to numerical imulations

    NASA Astrophysics Data System (ADS)

    Peukert, P.; Hrubý, J.

    2013-04-01

    The paper describes new results for an experimental heat exchanger equipped with a single corrugated capillary tube, basic information about the measurements and the experimental setup. Some of the results were compared with numerical simulations.

  11. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Pilot-Scale Test Results

    SciTech Connect

    Gary M. Blythe

    2006-03-01

    Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High Sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. This topical report presents the results from the Task 2 and Task 4 pilot-scale additive tests. The Task 3 and Task 5 full-scale additive tests will be conducted later in calendar year 2006.

  12. Can plumes collapse?: Experimental results and applications to Iceland.

    NASA Astrophysics Data System (ADS)

    Pears, M.; Lithgow-Bertelloni, C.

    2012-04-01

    Iceland has produced magma in a series of episodic events. From lava chemistry it has been inferred that the plume temperature decreased over the first 5 Myr by ~50°C and for the next 3 Myr following continental break up it continued to oscillate by ~25°C. Such data has been used to infer possible episodic collapse of the Iceland plume. Collapsing plumes are not common fluid dynamical features. In thermochemical plumes it is possible to achieve collapse by varying the relative buoyancy due to chemistry and due to temperature. In thermal plumes however, with a constant heat source we would expect plumes not to collapse but to not continue to rise after reaching a point of neutral buoyancy. We expect thermal plumes, like those Earth's bottom thermal boundary layer is capable of producing, to either rise to the surface or be deflected but not to collapse. We have designed an experimental setup to investigate the conditions that may lead to collapse in thermal plumes with constant heat sources. We used high-Prandtl number fluids with strongly temperature-dependent viscosities (Lyle Golden syrup and Liquidose 436) as analogues to Earth's high viscosity mantle in a cubic Plexiglas tank (26.5cm inner sides), heated by a circular 2cm diameter heater (flat with the base of the tank). We explored ΔTs between 3-60°C. The flow was visualized with shadowgraphs and an automated -3D Stereoscopic Particle Image Velocimetry (SPIV) system to measure velocities. In Lyle's Golden Syrup collapse occurred at ΔTs as high as 8°C, while in Liquidose 436 the 8°C ΔT run showed only partial collapse. The difference is not unexpected given the different physical properties. Partial collapse was seen even for ΔTs as high as 50°C. Both complete and partial collapse manifested themselves as downwelling flow in the central part of the conduit. Collapse stopped in the hotter plumes when the downwelling fluid met the hottest part of the conduit. The observed results suggest that diffusive

  13. Can plumes collapse?: Experimental results and applications to Iceland

    NASA Astrophysics Data System (ADS)

    Pears, M.; Lithgow-Bertelloni, C. R.

    2011-12-01

    Iceland has produced magma in a series of episodic events. From lava chemistry it has been inferred that the plume temperature decreased over the first 5 Myr by ~50°C and for the next 3 Myr following continental break up it continued to oscillate by ~25°C. Such data has been used to infer possible episodic collapse of the Iceland plume. Collapsing plumes are not common fluid dynamical features. In thermochemical plumes it is possible to achieve collapse by varying the relative buoyancy due to chemistry and due to temperature. In thermal plumes however, with a constant heat source we would expect plumes not to collapse but to not continue to rise after reaching a point of neutral buoyancy. We expect thermal plumes, like those Earth's bottom thermal boundary layer is capable of producing, to either rise to the surface or be deflected but not to collapse. We have designed an experimental setup to investigate the conditions that may lead to collapse in thermal plumes with constant heat sources. We used high-Prandtl number fluids with strongly temperature-dependent viscosities (Lyle Golden syrup and Liquidose 436) as analogues to Earth's high viscosity mantle in a cubic Plexiglas tank (26.5cm inner sides), heated by a circular 2cm diameter heater (flat with the base of the tank). We explored ΔTs between 3-60°C. The flow was visualized with shadowgraphs and an automated -3D Stereoscopic Particle Image Velocimetry (SPIV) system to measure velocities. In Lyle's Golden Syrup collapse occurred at ΔTs as high as 8°C, while in Liquidose 436 the 8° ΔT run showed only partial collapse. The difference is not unexpected given the different physical properties. Partial collapse was seen even for ΔTs as high as 50°C. Both complete and partial collapse manifested themselves as downwelling flow in the central part of the conduit. Collapse stopped in the hotter plumes when the downwelling fluid met the hottest part of the conduit. The observed results suggest that diffusive

  14. Dynamic Strength of Peridotite at Seismic Slip Rates: Experimental Results

    NASA Astrophysics Data System (ADS)

    Del Gaudio, P.; di Toro, G.; Han, R.; Hirose, T.; Shimamoto, T.; Cocco, M.

    2006-12-01

    Ultramafic pseudotachylytes (solidified melts produced during seismic slip) decorate exhumed faults within the Balmuccia peridotite from the Ivrea zone (Italy). Unpublished studies suggest that these pseudotachylytes were produced in the upper-mantle/lower-crust. Kanamori et al. (1998) proposed extensive production of seismic melts during the Mw = 8.3 Bolivian 1994 deep focus (~600 km in depth) earthquake. It follows that seismic melting might occur in the mantle. We conducted high-velocity rock friction experiments with the Balmuccia peridotite to determine the dynamic strength of faults in the presence of ultramafic melts. During each experiment, shear stress evolved with displacement: after an initial peak shear stress, fault strength gradually decreased towards a steady-state value. Dynamic fault weakening was associated with the formation of a molten layer along the slipping zone. By performing experiments for increasing normal stresses (5 to 13 MPa) and slip rates (0.37÷1.14 m/s or ~seismic slip rates), steady-state shear stress (1) slightly increased with increasing normal stress and (2), for a given normal stress, decreased with increasing slip rate. The ratio between steady-state shear stress and normal stress was 0.13, well below the solid rock friction coefficient (~0.8). Experiments conducted under argon or fresh air flux yielded similar shear stress magnitudes, suggesting that olivine oxidation did not affect significantly the fault strength in the high-velocity experiments. The slight dependence of shear stress with normal stress suggests melt lubrication. Since the physics of melt lubrication is somehow predictable (see poster by Nielsen et al.), these experimental results might be extrapolated to the study of rupture dynamics in mantle rocks.

  15. Experimental subarachnoid haemorrhage results in multifocal axonal injury.

    PubMed

    Kummer, Terrance T; Magnoni, Sandra; MacDonald, Christine L; Dikranian, Krikor; Milner, Eric; Sorrell, James; Conte, Valeria; Benetatos, Joey J; Zipfel, Gregory J; Brody, David L

    2015-09-01

    The great majority of acute brain injury results from trauma or from disorders of the cerebrovasculature, i.e. ischaemic stroke or haemorrhage. These injuries are characterized by an initial insult that triggers a cascade of injurious cellular processes. The nature of these processes in spontaneous intracranial haemorrhage is poorly understood. Subarachnoid haemorrhage, a particularly deadly form of intracranial haemorrhage, shares key pathophysiological features with traumatic brain injury including exposure to a sudden pressure pulse. Here we provide evidence that axonal injury, a signature characteristic of traumatic brain injury, is also a prominent feature of experimental subarachnoid haemorrhage. Using histological markers of membrane disruption and cytoskeletal injury validated in analyses of traumatic brain injury, we show that axonal injury also occurs following subarachnoid haemorrhage in an animal model. Consistent with the higher prevalence of global as opposed to focal deficits after subarachnoid haemorrhage and traumatic brain injury in humans, axonal injury in this model is observed in a multifocal pattern not limited to the immediate vicinity of the ruptured artery. Ultrastructural analysis further reveals characteristic axonal membrane and cytoskeletal changes similar to those associated with traumatic axonal injury. Diffusion tensor imaging, a translational imaging technique previously validated in traumatic axonal injury, from these same specimens demonstrates decrements in anisotropy that correlate with histological axonal injury and functional outcomes. These radiological indicators identify a fibre orientation-dependent gradient of axonal injury consistent with a barotraumatic mechanism. Although traumatic and haemorrhagic acute brain injury are generally considered separately, these data suggest that a signature pathology of traumatic brain injury-axonal injury-is also a functionally significant feature of subarachnoid haemorrhage, raising

  16. Experimental subarachnoid haemorrhage results in multifocal axonal injury

    PubMed Central

    Magnoni, Sandra; MacDonald, Christine L.; Dikranian, Krikor; Milner, Eric; Sorrell, James; Conte, Valeria; Benetatos, Joey J.; Zipfel, Gregory J.; Brody, David L.

    2015-01-01

    The great majority of acute brain injury results from trauma or from disorders of the cerebrovasculature, i.e. ischaemic stroke or haemorrhage. These injuries are characterized by an initial insult that triggers a cascade of injurious cellular processes. The nature of these processes in spontaneous intracranial haemorrhage is poorly understood. Subarachnoid haemorrhage, a particularly deadly form of intracranial haemorrhage, shares key pathophysiological features with traumatic brain injury including exposure to a sudden pressure pulse. Here we provide evidence that axonal injury, a signature characteristic of traumatic brain injury, is also a prominent feature of experimental subarachnoid haemorrhage. Using histological markers of membrane disruption and cytoskeletal injury validated in analyses of traumatic brain injury, we show that axonal injury also occurs following subarachnoid haemorrhage in an animal model. Consistent with the higher prevalence of global as opposed to focal deficits after subarachnoid haemorrhage and traumatic brain injury in humans, axonal injury in this model is observed in a multifocal pattern not limited to the immediate vicinity of the ruptured artery. Ultrastructural analysis further reveals characteristic axonal membrane and cytoskeletal changes similar to those associated with traumatic axonal injury. Diffusion tensor imaging, a translational imaging technique previously validated in traumatic axonal injury, from these same specimens demonstrates decrements in anisotropy that correlate with histological axonal injury and functional outcomes. These radiological indicators identify a fibre orientation-dependent gradient of axonal injury consistent with a barotraumatic mechanism. Although traumatic and haemorrhagic acute brain injury are generally considered separately, these data suggest that a signature pathology of traumatic brain injury—axonal injury—is also a functionally significant feature of subarachnoid haemorrhage

  17. Comparison of kinetic theory predictions with experimental results for a vibrated three-dimensional granular bed

    NASA Astrophysics Data System (ADS)

    Viswanathan, H.; Wildman, R. D.; Huntley, J. M.; Martin, T. W.

    2006-11-01

    The three-dimensional conservation equations relating energy and momentum transfer in a vibrated three-dimensional granular bed have been solved numerically by the finite element method. Two closures based on granular kinetic theory were used: one, the standard Fourier law relating heat flux to temperature gradient and the other, including an additional concentration gradient term. Each prediction of the two-dimensional axisymmetric granular temperature and packing fraction fields was compared against a one-dimensional model and three-dimensional experimental results, acquired using the technique of positron emission particle tracking. Both closures resulted in solutions that were in reasonable agreement with the experimental results, but it was found that differences between the predictions of each of the closures were relatively small in comparison to the anisotropy of the experimentally determined temperature distribution.

  18. Biomechanical investigation into the structural design of porous additive manufactured cages using numerical and experimental approaches.

    PubMed

    Tsai, Pei-I; Hsu, Ching-Chi; Chen, San-Yuan; Wu, Tsung-Han; Huang, Chih-Chieh

    2016-09-01

    Traditional solid cages have been widely used in posterior lumbar interbody fusion (PLIF) surgery. However, solid cages significantly affect the loading mechanism of the human spine due to their extremely high structural stiffness. Previous studies proposed and investigated porous additive manufactured (AM) cages; however, their biomechanical performances were analyzed using oversimplified bone-implant numerical models. Thus, the aim of this study was to investigate the outer shape and inner porous structure of the AM cages. The outer shape of the AM cages was discovered using a simulation-based genetic algorithm; their inner porous structure was subsequently analyzed parametrically using T10-S1 multilevel spine models. Finally, six types of the AM cages, which were manufactured using selective laser melting, were tested to validate the numerical outcomes. The subsidence resistance of the optimum design was superior to the conventional cage designs. A porous AM cage with a pillar diameter of 0.4mm, a pillar angle of 40°, and a porosity of between 69% and 80% revealed better biomechanical performances. Both the numerical and experimental outcomes can help surgeons to understand the biomechanics of PLIF surgery combined with the use of AM cages. PMID:27392226

  19. Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    McKeown, Joseph T.; Zweiacker, Kai; Liu, Can; Coughlin, Daniel R.; Clarke, Amy J.; Baldwin, J. Kevin; Gibbs, John W.; Roehling, John D.; Imhoff, Seth D.; Gibbs, Paul J.; Tourret, Damien; Wiezorek, Jörg M. K.; Campbell, Geoffrey H.

    2016-03-01

    Additive manufacturing (AM) of metals and alloys is becoming a pervasive technology in both research and industrial environments, though significant challenges remain before widespread implementation of AM can be realized. In situ investigations of rapid alloy solidification with high spatial and temporal resolutions can provide unique experimental insight into microstructure evolution and kinetics that are relevant for AM processing. Hypoeutectic thin-film Al-Cu and Al-Si alloys were investigated using dynamic transmission electron microscopy to monitor pulsed-laser-induced rapid solidification across microsecond timescales. Solid-liquid interface velocities measured from time-resolved images revealed accelerating solidification fronts in both alloys. The observed microstructure evolution, solidification product, and presence of a morphological instability at the solid-liquid interface in the Al-4 at.%Cu alloy are related to the measured interface velocities and small differences in composition that affect the thermophysical properties of the alloys. These time-resolved in situ measurements can inform and validate predictive modeling efforts for AM.

  20. Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing

    DOE PAGESBeta

    McKeown, Joseph T.; Zweiacker, Kai; Liu, Can; Coughlin, Daniel R.; Clarke, Amy J.; Baldwin, J. Kevin; Gibbs, John W.; Roehling, John D.; Imhoff, Seth D.; Gibbs, Paul J.; et al

    2016-01-27

    In research and industrial environments, additive manufacturing (AM) of metals and alloys is becoming a pervasive technology, though significant challenges remain before widespread implementation of AM can be realized. In situ investigations of rapid alloy solidification with high spatial and temporal resolutions can provide unique experimental insight into microstructure evolution and kinetics that are relevant for AM processing. Hypoeutectic thin-film Al–Cu and Al–Si alloys were investigated using dynamic transmission electron microscopy to monitor pulsed-laser-induced rapid solidification across microsecond timescales. Solid–liquid interface velocities measured from time-resolved images revealed accelerating solidification fronts in both alloys. We observed microstructure evolution, solidification product, andmore » presence of a morphological instability at the solid–liquid interface in the Al–4 at.%Cu alloy are related to the measured interface velocities and small differences in composition that affect the thermophysical properties of the alloys. These time-resolved in situ measurements can inform and validate predictive modeling efforts for AM.« less

  1. Characterization of the Kootenai River Aquatic Macroinvertebrate Community before and after Experimental Nutrient Addition, 2003-2006. [Chapter 3

    SciTech Connect

    Holderman, Charlie

    2009-02-19

    The Kootenai River ecosystem has experienced numerous ecological changes since the early 1900s. Some of the largest impacts to habitat, biological communities, and ecological function resulted from levee construction along the 120 km of river upstream from Kootenay Lake, completed by the 1950s, and the construction and operation of Libby Dam, completed in 1972 on the river near Libby Montana. Levee construction isolated tens of thousands of hectares of historic functioning floodplain habitat from the river channel, eliminating nutrient production and habitat diversity crucial to the functioning of a large river-floodplain ecosystem. Libby Dam continues to create large changes in the timing, duration, and magnitude of river flows, and greatly reduces sediment and nutrient transport to downstream river reaches. These changes have contributed to the ecological collapse of the post-development Kootenai River ecosystem and its native biological communities. In response to this artificial loss of nutrients, experimental nutrient addition was initiated in the Kootenay Lake's North Arm in 1992, the South Arm in 2004, and in the Kootenai River at the Idaho-Montana border during 2005. This report characterizes the macroinvertebrate community in the Kootenai River and its response to experimental nutrient addition during 2005 and 2006. This report also provides an initial evaluation of cascading trophic interactions in response to nutrient addition. Macroinvertebrates were sampled at 12 sites along a 325 km section of the Kootenai River, representing an upriver unimpounded reference reach, treatment and control canyon reach sites, and braided and meandering reach sites, all downstream from Libby Dam. Principle component analysis revealed that richness explained the greatest amount of variability in response to nutrient addition as did taxa from Acari, Coleoptera, Ephemeroptera, Plecoptera, and Trichoptera. Analysis of variance revealed that nutrient addition had a significant

  2. Experimental results from a reverse flow annual combustor

    NASA Astrophysics Data System (ADS)

    Joubert, F. M.; Hattingh, H. V.

    Computer-predicted temperature distributions in the wall liners of a combustion chamber were compared to the experimentally obtained values from combustion tests carried out in a small, full-scale reverse-flow annular combustor at sea level take-off conditionns. The largest discrepancies between the measured and predicted linear temperatures occured in the primary zone, with most of the predictions falling above the measured values, and with neither of the two computer programs satisfying the accuracy of 4 percent (of the experimental values) needed for making estimates on the life of a combustor. On the other hand, the correlation between the measured and predicted liner pressure drop was satisfactory. The validity and usefulnes of simple computer models as aids in the design of gas turbine combustion chambers are discussed.

  3. CP Violation in B Meson Decays: Experimental Results

    SciTech Connect

    Lanceri, Livio; /Trieste U. /INFN, Trieste

    2005-08-30

    CP violation is intimately connected with the puzzle of matter-antimatter asymmetry and baryogenesis. In the Standard Model of particle physics, the observed CP violation phenomena are accounted for by the Cabibbo-Kobayashi-Maskawa mechanism involving a phase in the quark mixing matrix. This paper is devoted to a review of the experimental status of CP violation in the decays of B mesons.

  4. Experimental Results for an Annular Aerospike with Differential Throttling

    NASA Technical Reports Server (NTRS)

    Ruf, Joseph H.; McDaniels, David M.

    2005-01-01

    A) MSFC funded an internal study on Altitude Compensating Nozzles: 1) Develop an ACN design and performance prediction tool. 2) Design, build and test cold flow ACN nozzles. 3) An annular aerospike nozzle was designed and tested. 4) Incorporated differential throttling to assess Thrust Vector Control. B) Objective of the test hardware: 1) Provide design tool verification. 2) Provide benchmark data for CFD calculations. 3) Experimentally measure side force, or TVC, for a differentially throttled annular aerospike.

  5. Freshwater ecology. Experimental nutrient additions accelerate terrestrial carbon loss from stream ecosystems.

    PubMed

    Rosemond, Amy D; Benstead, Jonathan P; Bumpers, Phillip M; Gulis, Vladislav; Kominoski, John S; Manning, David W P; Suberkropp, Keller; Wallace, J Bruce

    2015-03-01

    Nutrient pollution of freshwater ecosystems results in predictable increases in carbon (C) sequestration by algae. Tests of nutrient enrichment on the fates of terrestrial organic C, which supports riverine food webs and is a source of CO2, are lacking. Using whole-stream nitrogen (N) and phosphorus (P) additions spanning the equivalent of 27 years, we found that average terrestrial organic C residence time was reduced by ~50% as compared to reference conditions as a result of nutrient pollution. Annual inputs of terrestrial organic C were rapidly depleted via release of detrital food webs from N and P co-limitation. This magnitude of terrestrial C loss can potentially exceed predicted algal C gains with nutrient enrichment across large parts of river networks, diminishing associated ecosystem services. PMID:25745171

  6. Optimal active vibration absorber - Design and experimental results

    NASA Technical Reports Server (NTRS)

    Lee-Glauser, Gina; Juang, Jer-Nan; Sulla, Jeffrey L.

    1993-01-01

    An optimal active vibration absorber can provide guaranteed closed-loop stability and control for large flexible space structures with collocated sensors/actuators. The active vibration absorber is a second-order dynamic system which is designed to suppress any unwanted structural vibration. This can be designed with minimum knowledge of the controlled system. Two methods for optimizing the active vibration absorber parameters are illustrated: minimum resonant amplitude and frequency matched active controllers. The Controls-Structures Interaction Phase-1 Evolutionary Model at NASA LaRC is used to demonstrate the effectiveness of the active vibration absorber for vibration suppression. Performance is compared numerically and experimentally using acceleration feedback.

  7. RFI in hybrid loops - Simulation and experimental results.

    NASA Technical Reports Server (NTRS)

    Ziemer, R. E.; Nelson, D. R.; Raghavan, H. R.

    1972-01-01

    A digital simulation of an imperfect second-order hybrid phase-locked loop (HPLL) operating in radio frequency interference (RFI) is described. Its performance is characterized in terms of phase error variance and phase error probability density function (PDF). Monte-Carlo simulation is used to show that the HPLL can be superior to the conventional phase-locked loops in RFI backgrounds when minimum phase error variance is the goodness criterion. Similar experimentally obtained data are given in support of the simulation data.

  8. Experimental Studies of Ion Beam Neutralization: Preliminary Results

    SciTech Connect

    Ding, N.; Polansky, J.; Downey, R.; Wang, J.

    2011-05-20

    A testing platform is designed to study ion beam neutralization in the mesothermal, collisionless region. In the experimental setup, argon neutrals were ionized in a microwave cavity and accelerated by a plasma lens system which was biased to 2500 V above the system ground. Electrons were boiled off from two hot tungsten filaments to neutralize the ion beam. The plasma is diagnosed using Langmuir probe and Faraday probe. A 3-D traversing system and a complete data acquisition loop were developed to efficiently measure 3-D beam profile. Preliminary measurements of beam profiles are presented for different operating conditions.

  9. Optimal active vibration absorber: Design and experimental results

    NASA Technical Reports Server (NTRS)

    Lee-Glauser, Gina; Juang, Jer-Nan; Sulla, Jeffrey L.

    1992-01-01

    An optimal active vibration absorber can provide guaranteed closed-loop stability and control for large flexible space structures with collocated sensors/actuators. The active vibration absorber is a second-order dynamic system which is designed to suppress any unwanted structural vibration. This can be designed with minimum knowledge of the controlled system. Two methods for optimizing the active vibration absorber parameters are illustrated: minimum resonant amplitude and frequency matched active controllers. The Controls-Structures Interaction Phase-1 Evolutionary Model at NASA LaRC is used to demonstrate the effectiveness of the active vibration absorber for vibration suppression. Performance is compared numerically and experimentally using acceleration feedback.

  10. Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support

    NASA Astrophysics Data System (ADS)

    Smith, Jacob; Xiong, Wei; Yan, Wentao; Lin, Stephen; Cheng, Puikei; Kafka, Orion L.; Wagner, Gregory J.; Cao, Jian; Liu, Wing Kam

    2016-04-01

    Additive manufacturing (AM) methods for rapid prototyping of 3D materials (3D printing) have become increasingly popular with a particular recent emphasis on those methods used for metallic materials. These processes typically involve an accumulation of cyclic phase changes. The widespread interest in these methods is largely stimulated by their unique ability to create components of considerable complexity. However, modeling such processes is exceedingly difficult due to the highly localized and drastic material evolution that often occurs over the course of the manufacture time of each component. Final product characterization and validation are currently driven primarily by experimental means as a result of the lack of robust modeling procedures. In the present work, the authors discuss primary detrimental hurdles that have plagued effective modeling of AM methods for metallic materials while also providing logical speculation into preferable research directions for overcoming these hurdles. The primary focus of this work encompasses the specific areas of high-performance computing, multiscale modeling, materials characterization, process modeling, experimentation, and validation for final product performance of additively manufactured metallic components.

  11. Experimental study on the characteristics of ventilated cavitation around an underwater navigating body influenced by turbulent drag-reducing additives

    NASA Astrophysics Data System (ADS)

    Jiang, ChenXing; Li, FengChen

    2015-09-01

    In this study, a new control strategy for turbulent drag reduction involving ventilated cavitation is proposed. The configurational and hydrodynamic characteristics of ventilated cavities influenced by turbulent drag-reducing additives were experimentally studied in water tunnel. The test model was fixed in the water tunnel by a strut in the aft-part. Aqueous solutions of CTAC/NaSal (cetyltrimethyl ammonium chloride/sodium salicylate) with weight concentrations of 100, 200, 400 and 600 ppm (part per million), respectively, were injected into the ventilated air cavity from the edge of the cavitator with accurate control by an injection pump. The cavity configurations were recorded by a high-speed CCD camera. The hydrodynamic characteristics of the test model were measured by a six-component balance. Experimental results show that, within the presently tested cases, the lengths of cavity influenced by drag-reducing solution are smaller than normal condition (ventilated cavity) in water, but the asymmetry of the cavity is improved. The drag resisted by the test model is reduced dramatically (the maximum drag reduction can reach to 80%) and the re-entrant jet is more complex after the CTAC solution is injected into the cavity. Turbulent drag-reducing additives have the potential in enhancement of supercavitating asymmetry and further drag reduction.

  12. Review of experimental additions of rhodamine wt dye into reactive aquatic environments

    SciTech Connect

    Bencala, K.E.; Zellweger, G.W. )

    1988-09-01

    The fluorescent dye rhodamine WT is routinely used in hydrologic studies. It is also being used in field studies of the potential addition or loss of other chemical components to aquatic systems; for example, the determination of atmospheric oxygen transfer to streams or the study of solute transport in an acidic and metal-rich stream. Although rhodamine WT is considered appropriate environmentally as a tracer, toxicological concerns have been raised as the result of laboratory experiments. Smart (1984) placed these concerns in the environmental perspective. Steinheimer and Johnson (1986) have shown that an environmental hazard does not exist when following customary dye-study practices. Additional work by Abidi et al (1986) also has lessened the concerns regarding potential environmental hazards. Because this dye is generally considered effective and nonhazardous, it has been tested in environments in which its stability may be questioned a priori. An appreciable body of knowledge is now growing regarding the chemical fate of rhodamine WT dye in aquatic systems. Smart and Laidlaw (1977) previously presented an extensive evaluation of fluorescent dye properties in natural waters. Their survey included consideration of the impact of temperature, pH, salinity, chlorine, photochemical decay, chemical decay, and biodegradation. This presentation is a review of selected recent evaluations of rhodamine WT in reactive environments that were acidic or that presented significant opportunity for dye sorption onto solids.

  13. Shifts in the phylogenetic structure of arbuscular mycorrhizal fungi in response to experimental nitrogen and carbon dioxide additions.

    PubMed

    Mueller, Rebecca C; Bohannan, Brendan J M

    2015-09-01

    Global N inputs and atmospheric CO2 concentrations have increased as a result of human activities, and are predicted to increase along with population growth, with potentially negative effects on biodiversity. Using taxonomic and phylogenetic measures, we examined the response of arbuscular mycorrhizal fungi (AMF) to experimental manipulations of N and CO2 at the Jasper Ridge Global Change Experiment. No significant interactions between N and CO2 were observed, but individual effects of N and CO2 were found. Elevated CO2 resulted in changes in phylogenetic similarity, and a shift to phylogenetic clustering of AMF communities. N addition resulted in higher phylogenetic diversity and evenness, with no shifts in community composition and no significant signal for phylogenetic clustering. N addition resulted in an increase in both available N and the N:P ratio in N-amended plots, which suggests that changing patterns of nutrient limitation could have lead to altered species interactions. These findings suggest that elevated levels of N and CO2 altered patterns of AMF community assembly, with potential effects on ecosystem function. PMID:25990297

  14. Combined ab initio molecular dynamics and experimental studies of carbon atom addition to benzene.

    PubMed

    McKee, Michael L; Reisenauer, Hans Peter; Schreiner, Peter R

    2014-04-17

    Car-Parrinello molecular dynamics was used to explore the reactions between triplet and singlet carbon atoms with benzene. The computations reveal that, in the singlet C atom reaction, products are very exothermic where nearly every collision yields a product that is determined by the initial encounter geometry. The singlet C atom reaction does not follow the minimum energy path because the bimolecular reaction is controlled by dynamics (i.e., initial orientation of encounter). On the other hand, in a 10 K solid Ar matrix, ground state C((3)P) atoms do tend to follow RRKM kinetics. Thus, ab initio molecular dynamics (AIMD) results indicate that a significant fraction of C-H insertion occurs to form phenylcarbene whereas, in marked contrast to previous theoretical and experimental conclusions, the Ar matrix isolation studies indicate a large fraction of direct cycloheptatetraene formation, without the intermediacy of phenylcarbene. The AIMD calculations are more consistent with vaporized carbon atom experiments where labeling studies indicate the initial formation of phenylcarbene. This underlines that the availability of thermodynamic sinks can completely alter the observed reaction dynamics. PMID:24661002

  15. CSI Flight Computer System and experimental test results

    NASA Technical Reports Server (NTRS)

    Sparks, Dean W., Jr.; Peri, F., Jr.; Schuler, P.

    1993-01-01

    This paper describes the CSI Computer System (CCS) and the experimental tests performed to validate its functionality. This system is comprised of two major components: the space flight qualified Excitation and Damping Subsystem (EDS) which performs controls calculations; and the Remote Interface Unit (RIU) which is used for data acquisition, transmission, and filtering. The flight-like RIU is the interface between the EDS and the sensors and actuators positioned on the particular structure under control. The EDS and RIU communicate over the MIL-STD-1553B, a space flight qualified bus. To test the CCS under realistic conditions, it was connected to the Phase-0 CSI Evolutionary Model (CEM) at NASA Langley Research Center. The following schematic shows how the CCS is connected to the CEM. Various tests were performed which validated the ability of the system to perform control/structures experiments.

  16. Experimental results for a microscale ethanol vapor jet ejector

    NASA Astrophysics Data System (ADS)

    Gardner, W. G.; Jaworski, J. W.; Camacho, A. P.; Protz, J. M.

    2010-04-01

    A microscale jet ejector driven by ethanol vapor is designed and tested to induce a suction draft using a supersonic converging-diverging micronozzle. A three-dimensional axisymmetric nozzle is fabricated using electro-discharge machining to produce a throat diameter of 187 µm with an expansion ratio of 3:1. The motive nozzle achieves a design mass flow efficiency of 93% compared to isentropic calculations. Two different ejector area ratios are compared using ethanol vapor and nitrogen gas separately to motivate and entrain ambient air. The experimental data indicate that the ejector can produce a sufficient suction draft to satisfy both microengine mass flow and power off-take requirements to enable its substitution for high-speed microscale pumping turbomachinery.

  17. Geoacoustic and source tracking using particle filtering: experimental results.

    PubMed

    Yardim, Caglar; Gerstoft, Peter; Hodgkiss, William S

    2010-07-01

    A particle filtering (PF) approach is presented for performing sequential geoacoustic inversion of a complex ocean acoustic environment using a moving acoustic source. This approach treats both the environmental parameters [e.g., water column sound speed profile (SSP), water depth, sediment and bottom parameters] at the source location and the source parameters (e.g., source depth, range and speed) as unknown random variables that evolve as the source moves. This allows real-time updating of the environment and accurate tracking of the moving source. As a sequential Monte Carlo technique that operates on nonlinear systems with non-Gaussian probability densities, the PF is an ideal algorithm to perform tracking of environmental and source parameters, and their uncertainties via the evolving posterior probability densities. The approach is demonstrated on both simulated data in a shallow water environment with a sloping bottom and experimental data collected during the SWellEx-96 experiment. PMID:20649203

  18. Plant functional traits mediate reproductive phenology and success in response to experimental warming and snow addition in Tibet.

    PubMed

    Dorji, Tsechoe; Totland, Orjan; Moe, Stein R; Hopping, Kelly A; Pan, Jianbin; Klein, Julia A

    2013-02-01

    Global climate change is predicted to have large impacts on the phenology and reproduction of alpine plants, which will have important implications for plant demography and community interactions, trophic dynamics, ecosystem energy balance, and human livelihoods. In this article we report results of a 3-year, fully factorial experimental study exploring how warming, snow addition, and their combination affect reproductive phenology, effort, and success of four alpine plant species belonging to three different life forms in a semiarid, alpine meadow ecosystem on the central Tibetan Plateau. Our results indicate that warming and snow addition change reproductive phenology and success, but responses are not uniform across species. Moreover, traits associated with resource acquisition, such as rooting depth and life history (early vs. late flowering), mediate plant phenology, and reproductive responses to changing climatic conditions. Specifically, we found that warming delayed the reproductive phenology and decreased number of inflorescences of Kobresia pygmaea C. B. Clarke, a shallow-rooted, early-flowering plant, which may be mainly constrained by upper-soil moisture availability. Because K. pygmaea is the dominant species in the alpine meadow ecosystem, these results may have important implications for ecosystem dynamics and for pastoralists and wildlife in the region. PMID:23504784

  19. Construction of a WMR for Trajectory Tracking Control: Experimental Results

    PubMed Central

    Silva-Ortigoza, R.; Márquez-Sánchez, C.; Marcelino-Aranda, M.; Marciano-Melchor, M.; Silva-Ortigoza, G.; Bautista-Quintero, R.; Ramos-Silvestre, E. R.; Rivera-Díaz, J. C.; Muñoz-Carrillo, D.

    2013-01-01

    This paper reports a solution for trajectory tracking control of a differential drive wheeled mobile robot (WMR) based on a hierarchical approach. The general design and construction of the WMR are described. The hierarchical controller proposed has two components: a high-level control and a low-level control. The high-level control law is based on an input-output linearization scheme for the robot kinematic model, which provides the desired angular velocity profiles that the WMR has to track in order to achieve the desired position (x∗, y∗) and orientation (φ∗). Then, a low-level control law, based on a proportional integral (PI) approach, is designed to control the velocity of the WMR wheels to ensure those tracking features. Regarding the trajectories, this paper provides the solution or the following cases: (1) time-varying parametric trajectories such as straight lines and parabolas and (2) smooth curves fitted by cubic splines which are generated by the desired data points {(x1∗, y1∗),..., (xn∗, yn∗)}. A straightforward algorithm is developed for constructing the cubic splines. Finally, this paper includes an experimental validation of the proposed technique by employing a DS1104 dSPACE electronic board along with MATLAB/Simulink software. PMID:23997679

  20. EXPERIMENTAL RESULTS FROM A MICROWAVE CAVITY BEAM POSITION MONITOR.

    SciTech Connect

    BALAKIN,V.; BAZHAN,A.; LUNEV,P.; SOLYAK,N.; VOGEL,V.; ZHOGOLEV,P.; LISITSYN,A.; YAKIMENKO,V.

    1999-03-29

    Future Linear Colliders have hard requirements for the beam transverse position stability in the accelerator. A beam Position Monitor (BPM) with the resolution better than 0.1 micron in the single bunch regime is needed to control the stability of the beam position along the linac. Proposed BPM is based on the measurement of the asymmetrical mode excited by single bunch in the cavity. Four stages of signal processing (space-, time-, frequency- and phase-filtering providing the required signal-to-noise ratio) are used to obtain extremely high resolution. The measurement set-up was designed by BINP and installed at ATF/BNL to test experimentally this concept. The set-up includes three two-coordinates BPM's at the frequency of 13.566 GHz, and reference intensity/phase cavity. BPM's were mounted on support table. The two-coordinates movers allow to move and align BPM's along the straight line, using the signals from the beam. The position of each monitor is controlled by the sensors with the accuracy 0.03 micron. The information from three monitors allows to exclude angle and position jitter of the beam and measure BPM resolution. In the experiments the resolution of about 0.15 micron for 0.25 nC beam intensity was obtained, that is close to the value required.

  1. Construction of a WMR for trajectory tracking control: experimental results.

    PubMed

    Silva-Ortigoza, R; Márquez-Sánchez, C; Marcelino-Aranda, M; Marciano-Melchor, M; Silva-Ortigoza, G; Bautista-Quintero, R; Ramos-Silvestre, E R; Rivera-Díaz, J C; Muñoz-Carrillo, D

    2013-01-01

    This paper reports a solution for trajectory tracking control of a differential drive wheeled mobile robot (WMR) based on a hierarchical approach. The general design and construction of the WMR are described. The hierarchical controller proposed has two components: a high-level control and a low-level control. The high-level control law is based on an input-output linearization scheme for the robot kinematic model, which provides the desired angular velocity profiles that the WMR has to track in order to achieve the desired position (x∗, y∗) and orientation (φ∗). Then, a low-level control law, based on a proportional integral (PI) approach, is designed to control the velocity of the WMR wheels to ensure those tracking features. Regarding the trajectories, this paper provides the solution or the following cases: (1) time-varying parametric trajectories such as straight lines and parabolas and (2) smooth curves fitted by cubic splines which are generated by the desired data points {(x₁∗, y₁∗),..., (x(n)∗, y(n)∗)}. A straightforward algorithm is developed for constructing the cubic splines. Finally, this paper includes an experimental validation of the proposed technique by employing a DS1104 dSPACE electronic board along with MATLAB/Simulink software. PMID:23997679

  2. Experimental results with hydrogen fueled internal combustion engines

    NASA Technical Reports Server (NTRS)

    De Boer, P. C. T.; Mclean, W. J.; Homan, H. S.

    1975-01-01

    The paper focuses on the most important experimental findings for hydrogen-fueled internal combustion engines, with particular reference to the application of these findings to the assessment of the potential of hydrogen engines. Emphasis is on the various tradeoffs that can be made, such as between maximum efficiency, maximum power, and minimum NO emissions. The various possibilities for induction and ignition are described. Some projections are made about areas in which hydrogen engines may find their initial application and about optimum ways to design such engines. It is shown that hydrogen-fueled reciprocal internal combustion engines offer important advantages with respect to thermal efficiency and exhaust emissions. Problems arising from preignition can suitably be avoided by restricting the fuel-air equivalence ratio to values below about 0.5. The direct cylinder injection appears to be a very attractive way to operate the engine, because it combines a wide range of possible power outputs with a high thermal efficiency and very low NO emissions at part loads.

  3. Experimental test results of a generalized parameter fuel control

    NASA Technical Reports Server (NTRS)

    Batterton, P. G.; Gold, H.

    1973-01-01

    Considerable interest has been generated recently in low cost jet propulsion systems. One of the more complicated components of jet engines is the fuel control. Results of an effort to develop a simpler hydromechanical fuel control are presented. This prototype fuel control was installed on a J85-GE-13 jet engine. Results show that the fuel control provided satisfactory engine performance at sea level static conditions over its normal nonafterburning operating range, including startup. Results of both bench and engine tests are presented; the difficulties encountered are described.

  4. Summary of experimental heat-transfer results from the turbine hot section facility

    NASA Astrophysics Data System (ADS)

    Gladden, Herbert J.; Yeh, Fredrick C.

    1993-04-01

    Experimental data from the turbine Hot Section Facility are presented and discussed. These data include full-coverage film-cooled airfoil results as well as special instrumentation results obtained at simulated real engine conditions. Local measurements of airfoil wall temperature, airfoil gas-path static-pressure distribution, and local heat-transfer coefficient distributions are presented and discussed. In addition, measured gas and coolant temperatures and pressures are presented. These data are also compared with analyses from Euler and boundary-layer codes.

  5. Theoretical and experimental investigation of design for multioptical-axis freeform progressive addition lenses

    NASA Astrophysics Data System (ADS)

    Xiang, HuaZhong; Chen, JiaBi; Zhu, TianFen; Wei, YeFei; Fu, DongXiang

    2015-11-01

    A freeform progressive addition lens (PAL) provides a good solution to correct presbyopia and prevent juvenile myopia by distributing pupils' optical powers of distance zone, near zone, and intermediate zone and is more widely adopted in the present optometric study. However, there is still a lack of a single-optical-axis system for the design of a PAL. This paper focuses on the research for an approach for designing a freeform PAL. A multioptical-axis system based on real viewing conditions using the eyes is employed for the representation of the freeform surface. We filled small pupils in the intermediate zone as a progressive corridor and the distance- and near-vision portions were defined as the standard spherical surfaces delimited by quadratic curves. Three freeform PALs with a spherical surface as the front side and a freeform surface as the backside were designed. We demonstrate the fabrication and measurement technologies for the PAL surface using computer numerical control machine tools from Schneider Smart and a Visionix VM-2000 Lens Power Mapper. Surface power and astigmatic values were obtained. Preliminary results showed that the approach for the design and fabrication is helpful to advance the design procedure optimization and mass production of PALs in optometry.

  6. CPM and PDS -- A critical interpretation of experimental results

    SciTech Connect

    Stiebig, H.; Siebke, F.; Carius, R.

    1996-12-31

    CPM and PDS spectra of a-Si:H yield identical shape of the Urbach tail, while the defect absorption measured by PDS differs significantly from CPM. In this work an analysis of CPM and PDS spectra of annealed and degraded films is presented. Numerical simulations of CPM and PDS data, taking into account optical transitions, capture and emission processes as well as the Fermi level, yield information on the energy distribution and the charge state of the defects. The simulations reveal the coexistence of defects in the D{sup {minus}}, D{sup +} and D{sup 0} states. The defect distribution is dominated by charged states as predicted by the defect-pool model. Good agreement between measured and simulated PDS and CPM spectra can be obtained in the case of a homogeneous defect density. It is shown that differences between CPM and PDS are due to different sensitivities of the techniques to charged and neutral defect states. Microscopic inhomogeneities may cause significant additional differences.

  7. Primary simulation and experimental results of a coaxial plasma accelerator

    NASA Astrophysics Data System (ADS)

    Chen, Z.; Huang, J.; Han, J.; Zhang, Z.; Quan, R.; Wang, L.; Yang, X.; Feng, C.

    A coaxial plasma accelerator with a compressing coil is developed to simulate the impacting and erosion effect of space debris on exposed materials of spacecrafts During its adjustment operation some measurements are conducted including discharging current by Rogowski coil average plasma speed in the coaxial gun by magnetic coils and ejected particle speed by piezoelectric sensor etc In concert with the experiment a primary physical model is constructed in which only the coaxial gun is taken into account with the compressor coil not considered for its unimportant contribution to the plasma ejection speed The calculation results by the model agree well with the diagnostic results considering some assumptions for simplification Based on the simulation result some important suggestions for optimum design and adjustment of the accelerator are obtained for its later operation

  8. Railgun hybrid armatures, experimental results and performance characteristics

    NASA Astrophysics Data System (ADS)

    Crawford, Roger; Keefer, Dennis; Sedghinasab, Ahad

    1991-01-01

    Six hybrid armature designs were evaluated in the UTSI one-centimeter square-bore railgun. Advanced diagnostic instrumentation was used to determine the characteristics of hybrid armatures which include a compound armature (current in plasma brushes to the metal armature followed by a plasma armature). The hybrid armatures were compact, with shorter current distributions than plasma armatures as measured with both optical and electromagnetic probes. Although the results are preliminary, due to the limited geometries investigated, the results are very encouraging. The short (less than one-bore-diameter) hybrids demonstrated efficiencies equal to or greater than plasma armatures and good armature stability.

  9. Pegasus liner stability experiments: Diagnostics and experimental results

    SciTech Connect

    Clark, D.A.; Morgan, D.V.; Rodriguez, G.

    1998-12-31

    A series of experiments to compare imploding cylindrical liner performance with Magneto-HydroDynamic (MHD) modeling has been performed at the Los Alamos National Laboratory Pegasus capacitor bank. Several configurations of aluminum liners have been used; some with initial perturbations and some smooth. Instability growth resulting from the perturbations has been observed with high resolution. Load diagnostics included radial x-rays, fiber optic impact pins, and VISAR (Velocity Interferometer for a Surface of Any Reflector). Diagnostic results and comparisons for several liner stability (LS) experiments are presented.

  10. Qualitative versus Quantitative Results: An Experimental Introduction to Data Interpretation.

    ERIC Educational Resources Information Center

    Johnson, Eric R.; Alter, Paula

    1989-01-01

    Described is an experiment in which the student can ascertain the meaning of a negative result from a qualitative test by performing a more sensitive quantitative test on the same sample. Methodology for testing urinary glucose with a spectrophotometer at 630 nm and with commercial assaying glucose strips is presented. (MVL)

  11. Comments on experimental results of energy confinement of tokamak plasmas

    SciTech Connect

    Chu, T.K.

    1989-04-01

    The results of energy-confinement experiments on steady-state tokamak plasmas are examined. For plasmas with auxiliary heating, an analysis based on the heat diffusion equation is used to define heat confinement time (the incremental energy confinement time). For ohmically sustained plasmas, experiments show that the onset of the saturation regime of energy confinement, marfeing, detachment, and disruption are marked by distinct values of the parameter /bar n//sub e///bar j/. The confinement results of the two types of experiments can be described by a single surface in 3-dimensional space spanned by the plasma energy, the heating power, and the plasma density: the incremental energy confinement time /tau//sub inc/ = ..delta..W/..delta..P is the correct concept for describing results of heat confinement in a heating experiment; the commonly used energy confinement time defined by /tau//sub E/ = W/P is not. A further examination shows that the change of edge parameters, as characterized by the change of the effective collision frequency ..nu../sub e/*, governs the change of confinement properties. The totality of the results of tokamak experiments on energy confinement appears to support a hypothesis that energy transport is determined by the preservation of the pressure gradient scale length. 70 refs., 6 figs., 1 tab.

  12. Joint Soviet-American experiment on hypokinesia: Experimental results

    NASA Technical Reports Server (NTRS)

    Burovskiy, N. N.

    1979-01-01

    Comprehensive results are reported from the Soviet portion of a joint Soviet-American experiment involving hypokinesia. The main emphases are on chemical analyses of blood and urine, functional tests, and examination of the cardiovascular system by electrocardiography, echocardiography, and plethysmography.

  13. BFS Simulation and Experimental Analysis of the Effect of Ti Additions on the Structure of NiAl

    NASA Technical Reports Server (NTRS)

    Bozzolo, Guillermo; Noebe, Ronald D.; Ferrante,John; Garg, Anita; Honecy, Frank S.; Amador, Carlos

    1999-01-01

    The Bozzolo-Ferrante-Smith (BFS) method for alloy energetics is applied to the study of ternary additions to NiAl. A description of the method and its application to alloy design is given. Two different approaches are used in the analysis of the effect of Ti additions to NiAl. First, a thorough analytical study is performed, where the energy of formation, lattice parameter and bulk modulus are calculated for a large number of possible atomic distributions of Ni, Al and Ti. Substitutional site preference schemes and formation of precipitates are thus predicted and analyzed. The second approach used consists of the determination of temperature effects on the final results, as obtained by performing a number of large scale numerical simulations using the Monte Carlo-Metropolis procedure and BFS for the calculation of the energy at every step in the simulation. The results indicate a sharp preference of Ti for Al sites in Ni-rich NiAl alloys and the formation of ternary Heusler precipitates beyond the predicted solubility limit of 5 at. % Ti. Experimental analysis of three Ni-Al-Ti alloys confirms the theoretical predictions.

  14. Atomistic Simulations and Experimental Analysis of the Effect of Ti Additions on the Structure of NiAl

    NASA Technical Reports Server (NTRS)

    Bozzolo, Guillermo; Noebe, Ronald D.; Ferrante, John; Garg, Anita; Amador, Carlos

    1997-01-01

    The Bozzolo-Ferrante-Smith (BFS) semiempirical method for alloy energetics is applied to the study of ternary additions to NiAl alloys. A detailed description of the method and its application to alloy design is given. Two different approaches are used in the analysis of the effect of Ti additions to NiAl. First, a thorough analytical study is performed, where the energy of formation, lattice parameter and bulk modulus are calculated for hundreds of possible atomic distributions of Ni, Al and Ti. Substitutional site preference schemes and formation of precipitates are thus predicted and analyzed. The second approach used consists of the determination of temperature effects on the final results, as obtained by performing a number of large scale numerical simulations using the Monte Carlo - Metropolis procedure and BFS for the calculation of the energy at every step in the simulation. The results indicate a sharp preference of Ti for Al sites in Ni-rich NiAl alloys and the formation of ternary Heusler precipitates beyond the predicted solubility limit of 5 at. % Ti. Experimental analysis of three NiAl+Ti alloys confirms the theoretical predictions.

  15. Recent Experimental Results from Cryogenic Implosions on OMEGA

    NASA Astrophysics Data System (ADS)

    Sangster, T. C.; Goncharov, V. N.; Radha, P. B.; Betti, R.; Boehly, T. R.; Glebov, V. Yu.; Hu, S. X.; McCrory, R. L.; McKenty, P. W.; Meyerhofer, D. D.; Seka, W.; Smalyuk, V. A.; Frenje, J. A.; Petrasso, R. D.; Shvarts, D.

    2008-11-01

    The implosion performance of energy-scaled cryogenic D2 and DT targets on the 60-beam OMEGA laser is important for understanding the physics of highly compressed fuel and the validation of ignition designs for the NIF. Recent experiments have demonstrated good performance using a multi-shock drive that has been tuned based on cryogenic cone-in-shell targets. Fuel areal densities are now consistently exceeding 80% of the 1-D prediction, while the yields are between 10% and 20% of 1-D predictions. These results demonstrate the benefit (and necessity) of an independent shock-timing platform. This talk will present the latest implosion performance results and potentially show the first cryogenic-fuel-core radiographs using a short pulse beam from the new OMEGA EP Laser Facility. This work was supported by the U.S. Department of Energy Office of Inertial Confinement Fusion under Cooperative Agreement No. DE-FC52-08NA28302.

  16. Delaminations in composite plates under transverse static loads - Experimental results

    NASA Technical Reports Server (NTRS)

    Finn, Scott R.; He, Yi-Fei; Springer, George S.

    1992-01-01

    Tests were performed measuring the damage initiation loads and the locations, shapes, and sizes of delaminations in Fiberite T300/976 graphite/epoxy, Fiberite IM7/977-2 graphite-toughened epoxy, and ICI APC-2 graphite-PEEK plates subjected to transverse static loads. The data were compared to the results of the Finn-Springer model, and good agreements were found between the measured and calculated delamination lengths and widths.

  17. Experimental rivers: from braided to meandering by addition of cohesive floodplain material

    NASA Astrophysics Data System (ADS)

    Van Dijk, W. M.; van de Lageweg, W. I.; Kleinhans, M. G.

    2011-12-01

    Braided rivers are relatively easily formed in the laboratory, whereas self-formed meandering rivers have proven very difficult to form. Our objective is to create self-formed dynamic braided and meandering rivers in a laboratory, and to quantitatively compare the resulting morphology and deposits. We applied a transverse moving inlet funnel for flow and sediment at the upstream boundary, mimicking meanders migrating into the control section. Conditions in the meandering and braided experiment were exactly equal except that slightly cohesive silt-sized silica flour was added to the feed sediment of the meandering channel. This was to test the hypotheses that 1) meandering rivers have relatively narrower and deeper channels due to bank cohesion, and 2) floodplain-filling sediment fills potential chute channels that would otherwise lead to braiding. Our experiments were conducted in a flume of 10x6 meter, which was split up into two separate fluvial plains (each 10x3 m). The parallel setups have identical cycled discharge regimes with a longer duration low flow and a shorter duration high flow simulating floods. The bed sediment consisted of a poorly sorted sediment mixture ranging from fine sand to fine gravel. The evolution was recorded by high-resolution line-laser scanning and digital Single Lens Reflex (SLR) camera used for channel-floodplain segmentation and particle size estimation. In agreement with earlier work, the experimental river without silica flour evolves from alternate bars to a fully braided river. With silica flour added to the feed, a meandering system evolved with frequent chute cut-offs that nevertheless remained mostly single-thread. The silica flour introduces cohesive self-formed floodplains, causes narrower channels and fills potential chutes. Large bends developed with scroll bar complexes and sinuosity reached maxima of 1.4. In contrast, the non-cohesive experiment is dominated by much more rapid channel shifting and displacement, so that

  18. Linkages Between Biotic and Abiotic Belowground Processes in a Mojave Desert Ecosystem: Responses to Experimental Nitrogen and Water Additions

    NASA Astrophysics Data System (ADS)

    Verburg, P. S.; Marion, G. M.; Young, A. C.; Glanzmann, I.; Stevenson, B.; Arnone, J. A.; Nowak, R. S.

    2007-05-01

    Fine roots play a critical role in nutrient acquisition and water uptake. Yet it is unclear how fine roots in arid environments respond to increased nitrogen deposition and rainfall, two important global change factors in arid lands in the southwestern United States. In addition it is unclear how changes in root activity may impact soil CO2 concentrations, an important parameter affecting carbonate dynamics. We measured fine root length density (RLD) and soil CO2 concentrations for two years in experimentally manipulated plots in a Mojave Desert ecosystem. The study was conducted at the Mojave Global Change Facility located at the Nevada Test Site 60 miles northwest of Las Vegas. The treatments included: 1) three 25 mm water additions during the summer, 2) one nitrogen addition in the fall equivalent to 40 kg per hectare per year, 3) a combined water and nitrogen addition and, 4) untreated controls. Root data were collected using minirhizotron imaging approximately every 90 days underneath shrubs and intershrub areas. Soil CO2 concentrations were collected at the same sampling times and locations at 10, 40 and 90 cm depth using gas wells. The RLD showed clear seasonal patterns with the fastest increase in RLD occurring between February and April. During the winter the increase in RLD was higher underneath shrubs than in intershrub areas but during the summer months increases in RLD were similar under shrubs and in intershrub areas. Water additions slightly increased root mortality during the summer but this increase in mortality was not large enough to cause consistent differences in RLD between control and irrigated plots. Nitrogen addition had no effect on root dynamics in any of the plots. In contrast to RLD, irrigation consistently increased soil CO2 concentrations at all depths during the summer even when roots were not actively growing anymore. We speculate that the increased mortality under irrigation causes increased heterotrophic respiration which may

  19. Experimental results on the atmospheric muon charge ratio

    NASA Astrophysics Data System (ADS)

    Mauri, N.

    2016-07-01

    The atmospheric muon charge ratio, defined as the number of positive over negative charged muons, is a highly informative observable both for cosmic rays and particle physics. It allows studying the features of high-energy hadronic interactions in the forward region and the composition of primary cosmic rays. In this review results from underground experiments measuring the charge ratio around 1 TeV are discussed. The measurements in the TeV energy region constrain the associated kaon production, which is particularly important e.g. for the calculation of the atmospheric neutrino flux.

  20. Delaminations in composite plates under transverse impact loads - Experimental results

    NASA Technical Reports Server (NTRS)

    Finn, Scott R.; He, Ye-Fei; Springer, George S.

    1993-01-01

    Tests were performed measuring the locations and geometries of delaminations in Fiberite T300/976 graphite/epoxy, Fiberite IM7/977-2 graphite-toughened epoxy, and ICI APC-2 graphite/PEEK plates subjected to transverse impact loads. The data provide specific information on the effects of impactor velocity, impactor mass, material, thickness of back ply group, difference in fiber orientation between adjacent ply groups, plate thickness, and impactor nose radius. The data were compared to the results of the Finn-Springer model. The model was found to describe the data with reasonable accuracy.

  1. Persistent GMTI surveillance: theoretical performance bounds and some experimental results

    NASA Astrophysics Data System (ADS)

    Balaji, Bhashyam; Damini, Anthony; Wang, Kai

    2010-04-01

    In certain operational radar modes, slow ground moving targets are detected over several processing intervals using space-time adaptive processing. This enables use of Bayesian filtering and smoothing algorithms for estimation of time-varying moving target parameters. In this paper, some Bayesian filtering algorithms are investigated. The Craḿer-Rao bounds based on subsets of radar measurements (range, angle and Doppler) are derived for typical maneuvering targets and compared against simulated results from Bayesian filters. The performance is also evaluated using real data obtained from DRDC Ottawa's XWEAR radar.

  2. Parallel and Distributed Computational Fluid Dynamics: Experimental Results and Challenges

    NASA Technical Reports Server (NTRS)

    Djomehri, Mohammad Jahed; Biswas, R.; VanderWijngaart, R.; Yarrow, M.

    2000-01-01

    This paper describes several results of parallel and distributed computing using a large scale production flow solver program. A coarse grained parallelization based on clustering of discretization grids combined with partitioning of large grids for load balancing is presented. An assessment is given of its performance on distributed and distributed-shared memory platforms using large scale scientific problems. An experiment with this solver, adapted to a Wide Area Network execution environment is presented. We also give a comparative performance assessment of computation and communication times on both the tightly and loosely-coupled machines.

  3. Mars ionosphere: A review of experimental results and modeling studies

    NASA Astrophysics Data System (ADS)

    Haider, S. A.; Mahajan, K. K.; Kallio, E.

    2011-10-01

    In this paper we review results from atmospheric and ionospheric experiments on the early planetary missions like the Mariners, Mars, and Viking 1 and 2 Orbiters/Landers. We then discuss the new results obtained from the two latest missions, namely, the Mars Global Surveyor (MGS) and Mars Express (MEX). The MGS had three ionospheric and atmospheric related experiments, namely, (1) the radio science experiment, which generated 5600 electron density profiles covering a major portion of sunspot cycle 23; (2) the magnetometer/electron reflectometer experiment, which very clearly answered the question about the presence or absence of Martian intrinsic magnetic field; and (3) the accelerometer experiment, which provided a large database of atmospheric density at various Martian locations during the aerobraking phases. The topside sounder on the MEX provided electron density profiles for altitudes above the primary ionospheric peak with a very high time resolution, thereby providing opportunity for exploring ionospheric conditions during events of rapid changes like solar flares. Unlike Venus, where simultaneous electron density, ion density, and magnetic field measurements were made, Mars lacks this kind of information. Consequently, most of our current understanding of Mars' plasma environment is based on theoretical models. We therefore review the various atmospheric and ionospheric models for Mars, which have been generated during the last 4 decades.

  4. Experimental Results of Guided Wave Travel Time Tomography

    NASA Astrophysics Data System (ADS)

    Volker, Arno; Bloom, Joost

    2011-06-01

    Corrosion is one of the industries major issues regarding the integrity of assets. Currently inspections are conducted at regular intervals to ensure a sufficient integrity level of these assets. Cost reduction while maintaining a high level of reliability and safety of installations is a major challenge. The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation matches very well with the objective to reduce cost while maintaining a high safety level. Guided waves are very attractive for permanent monitoring systems because they can travel over large distances and therefore provide the essential large area coverage. Making use of the dispersive behavior of the guided waves, a wall thickness map over a distance of several meters can be made using only two rings of guided wave transducers. Travel time tomography is used to translate transmission travel times into a wall thickness map. This method has been applied in the field for the first time to map the wall thickness under two clearly corroded pipe supports of a 8″ and 10″ gas pipe line. The tomographic inversion results clearly maps the corrosion under the supports. Independent reference measurements confirm the tomographic inversion results.

  5. Space Launch System Base Heating Test: Experimental Operations & Results

    NASA Technical Reports Server (NTRS)

    Dufrene, Aaron; Mehta, Manish; MacLean, Matthew; Seaford, Mark; Holden, Michael

    2016-01-01

    NASA's Space Launch System (SLS) uses four clustered liquid rocket engines along with two solid rocket boosters. The interaction between all six rocket exhaust plumes will produce a complex and severe thermal environment in the base of the vehicle. This work focuses on a recent 2% scale, hot-fire SLS base heating test. These base heating tests are short-duration tests executed with chamber pressures near the full-scale values with gaseous hydrogen/oxygen engines and RSRMV analogous solid propellant motors. The LENS II shock tunnel/Ludwieg tube tunnel was used at or near flight duplicated conditions up to Mach 5. Model development was based on the Space Shuttle base heating tests with several improvements including doubling of the maximum chamber pressures and duplication of freestream conditions. Test methodology and conditions are presented, and base heating results from 76 runs are reported in non-dimensional form. Regions of high heating are identified and comparisons of various configuration and conditions are highlighted. Base pressure and radiometer results are also reported.

  6. IP voice over ATM satellite: experimental results over satellite channels

    NASA Astrophysics Data System (ADS)

    Saraf, Koroush A.; Butts, Norman P.

    1999-01-01

    IP telephony, a new technology to provide voice communication over traditional data networks, has the potential to revolutionize telephone communication within the modern enterprise. This innovation uses packetization techniques to carry voice conversations over IP networks. This packet switched technology promises new integrated services, and lower cost long-distance communication compared to traditional circuit switched telephone networks. Future satellites will need to carry IP traffic efficiently in order to stay competitive in servicing the global data- networking and global telephony infrastructure. However, the effects of Voice over IP over switched satellite channels have not been investigated in detail. To fully understand the effects of satellite channels on Voice over IP quality; several experiments were conducted at Lockheed Martin Telecommunications' Satellite Integration Lab. The result of those experiments along with suggested improvements for voice communication over satellite are presented in this document. First, a detailed introduction of IP telephony as a suitable technology for voice communication over future satellites is presented. This is followed by procedures for the experiments, along with results and strategies. In conclusion we hope that these capability demonstrations will alleviate any uncertainty regarding the applicability of this technology to satellite networks.

  7. Acceleration and torque feedback for robotic control - Experimental results

    NASA Technical Reports Server (NTRS)

    Mclnroy, John E.; Saridis, George N.

    1990-01-01

    Gross motion control of robotic manipulators typically requires significant on-line computations to compensate for nonlinear dynamics due to gravity, Coriolis, centripetal, and friction nonlinearities. One controller proposed by Luo and Saridis avoids these computations by feeding back joint acceleration and torque. This study implements the controller on a Puma 600 robotic manipulator. Joint acceleration measurement is obtained by measuring linear accelerations of each joint, and deriving a computationally efficient transformation from the linear measurements to the angular accelerations. Torque feedback is obtained by using the previous torque sent to the joints. The implementation has stability problems on the Puma 600 due to the extremely high gains inherent in the feedback structure. Since these high gains excite frequency modes in the Puma 600, the algorithm is modified to decrease the gain inherent in the feedback structure. The resulting compensator is stable and insensitive to high frequency unmodeled dynamics. Moreover, a second compensator is proposed which uses acceleration and torque feedback, but still allows nonlinear terms to be fed forward. Thus, by feeding the increment in the easily calculated gravity terms forward, improved responses are obtained. Both proposed compensators are implemented, and the real time results are compared to those obtained with the computed torque algorithm.

  8. Experimental Results from Oak Ridge Isomer Spectrometer and Separator (ORISS)

    NASA Astrophysics Data System (ADS)

    Piechaczek, A.; Batchelder, J. C.; Carter, H. K.; Goans, R. E.; Liu, S.; Shchepunov, V.; Zganjar, E. F.; Unirib Collaboration

    2013-10-01

    ORISS is a linear multi reflection time-of-flight mass analyzer developed by the University Radioactive Ion Beam Consortium. It will be used to separate any isobar and many isomers for decay spectroscopy experiments. The entire system's operation was demonstrated with a less than ideal multi-isotopic ion source and achieved a mass resolving power as high as 430,000. To better characterize the system we have installed a monoisotopic 133Cs ion source. The radiofrequency quadrupole ion cooler and buncher, which serves as the ion injector into ORISS, was tested in stand-alone mode and achieved a longitudinal emittance of 22 π eV × ns and transmission >40%. These very good results confirm our expectation that ORISS can achieve the design goals. Using the improved ion source, we expect, very soon, to demonstrate the complete system's design goals of 400,000 mass resolving power and 50% transmission.

  9. Experimental results on low alpha electron-storage rings

    SciTech Connect

    Robin, D.; Hama, H.; Nadji, A.

    1995-09-01

    The authors report on experiments performed in two synchrotron light sources, UVSOR and Super-ACO, where the momentum compaction factor is reduced in order to reduce the bunch length. By controlling the second-order momentum compaction factor, UVSOR and Super-ACO have managed to reduce the first-order momentum compaction factor by 100. At low current the resulting bunch lengths are less than 10 ps, a factor of 10 smaller than normal. Measurements of current dependent bunch lengthening in UVSOR are presented and the cause of the bunch lengthening is determined to be potential-well distortion. The authors also show that by operating with a negative momentum compaction factor, SuperACO has achieved shorter bunch lengthening and higher peak currents than at positive momentum compaction.

  10. Microgravity Fluid Separation Physics: Experimental and Analytical Results

    NASA Technical Reports Server (NTRS)

    Shoemaker, J. Michael; Schrage, Dean S.

    1997-01-01

    Effective, low power, two-phase separation systems are vital for the cost-effective study and utilization of two-phase flow systems and flow physics of two-phase flows. The study of microgravity flows have the potential to reveal significant insight into the controlling mechanisms for the behavior of flows in both normal and reduced gravity environments. The microgravity environment results in a reduction in gravity induced buoyancy forces acting on the discrete phases. Thus, surface tension, viscous, and inertial forces exert an increased influence on the behavior of the flow as demonstrated by the axisymmetric flow patterns. Several space technology and operations groups have studied the flow behavior in reduced gravity since gas-liquid flows are encountered in several systems such as cabin humidity control, wastewater treatment, thermal management, and Rankine power systems.

  11. Wide-field Fizeau imaging telescope: experimental results.

    PubMed

    Kendrick, R L; Aubrun, Jean-Noel; Bell, Ray; Benson, Robert; Benson, Larry; Brace, David; Breakwell, John; Burriesci, Larry; Byler, Eric; Camp, John; Cross, Gene; Cuneo, Peter; Dean, Peter; Digumerthi, Ramji; Duncan, Alan; Farley, John; Green, Andy; Hamilton, Howard H; Herman, Bruce; Lauraitis, Kris; de Leon, Erich; Lorell, Kenneth; Martin, Rob; Matosian, Ken; Muench, Tom; Ni, Mel; Palmer, Alice; Roseman, Dennis; Russell, Sheldon; Schweiger, Paul; Sigler, Rob; Smith, John; Stone, Richard; Stubbs, David; Swietek, Gregg; Thatcher, John; Tischhauser, C; Wong, Harvey; Zarifis, Vassilis; Gleichman, Kurt; Paxman, Rick

    2006-06-20

    A nine-aperture, wide-field Fizeau imaging telescope has been built at the Lockheed-Martin Advanced Technology Center. The telescope consists of nine, 125 mm diameter collector telescopes coherently phased and combined to form a diffraction-limited image with a resolution that is consistent with the 610 mm diameter of the telescope. The phased field of view of the array is 1 murad. The measured rms wavefront error is 0.08 waves rms at 635 nm. The telescope is actively controlled to correct for tilt and phasing errors. The control sensing technique is the method known as phase diversity, which extracts wavefront information from a pair of focused and defocused images. The optical design of the telescope and typical performance results are described. PMID:16778931

  12. New experimental results in atlas-based brain morphometry

    NASA Astrophysics Data System (ADS)

    Gee, James C.; Fabella, Brian A.; Fernandes, Siddharth E.; Turetsky, Bruce I.; Gur, Ruben C.; Gur, Raquel E.

    1999-05-01

    In a previous meeting, we described a computational approach to MRI morphometry, in which a spatial warp mapping a reference or atlas image into anatomic alignment with the subject is first inferred. Shape differences with respect to the atlas are then studied by calculating the pointwise Jacobian determinant for the warp, which provides a measure of the change in differential volume about a point in the reference as it transforms to its corresponding position in the subject. In this paper, the method is used to analyze sex differences in the shape and size of the corpus callosum in an ongoing study of a large population of normal controls. The preliminary results of the current analysis support findings in the literature that have observed the splenium to be larger in females than in males.

  13. M-I-S solar cell - Theory and experimental results

    NASA Technical Reports Server (NTRS)

    Childs, R.; Fortuna, J.; Geneczko, J.; Fonash, S. J.

    1976-01-01

    The paper presents an operating-mode analysis of an MIS solar cell and discusses the advantages which can arise as a result of the use of transport control, field shaping (increased n factor), and zero bias barrier height modification. It is noted that for an n-type semiconductor, it is relatively easy to obtain an enhanced n factor using acceptor-like states without an increase in diode saturation current, the converse being true for p-type semiconductors. Several MIS configurations are examined: an acceptor-like, localized state configuration producing field shaping and no change in diode saturation current, and acceptor-like localized configurations producing field shaping, with a decrease of diode saturation current, in one case, and an increase in the other.

  14. Experimental Results in DIS, SIDIS and DES from Jefferson Lab

    SciTech Connect

    Kuhn, Sebastian E.

    2011-07-15

    Jefferson Lab's electron accelerator in its present incarnation, with a maximum beam energy slightly above 6 GeV, has already enabled a large number of experiments expanding our knowledge of nucleon and nuclear structure (especially in Deep Inelastic Scattering--DIS--at moderately high x, and in the resonance region). Several pioneering experiments have yielded first results on Deeply Virtual Compton Scattering (DVCS) and other Deep Exclusive Processes (DES), and the exploration of the rich landscape of transverse momentum-dependent (TMD) structure functions using Semi-Inclusive electron scattering (SIDIS) has begun. With the upgrade of CEBAF to 12 GeV now underway, a significantly larger kinematic space will become available. The 12 GeV program taking shape will complete a detailed mapping of inclusive, TMD and generalized distribution functions for quarks, antiquarks and gluons in the valence region and beyond.

  15. Experimental Results in DIS, SIDIS and DES from Jefferson Lab

    SciTech Connect

    Sebastian Kuhn

    2011-07-01

    Jefferson Lab's electron accelerator in its present incarnation, with a maximum beam energy slightly above 6 GeV, has already enabled a large number of experiments expanding our knowledge of nucleon and nuclear structure (especially in Deep Inelastic Scattering—DIS—at moderately high x, and in the resonance region). Several pioneering experiments have yielded first results on Deeply Virtual Compton Scattering (DVCS) and other Deep Exclusive Processes (DES), and the exploration of the rich landscape of transverse momentum-dependent (TMD) structure functions using Semi-Inclusive electron scattering (SIDIS) has begun. With the upgrade of CEBAF to 12 GeV now underway, a significantly larger kinematic space will become available. The 12 GeV program taking shape will complete a detailed mapping of inclusive, TMD and generalized distribution functions for quarks, antiquarks and gluons in the valence region and beyond.

  16. Longitudinal variation of the equatorial ionosphere: Modeling and experimental results

    NASA Astrophysics Data System (ADS)

    Souza, J. R.; Asevedo, W. D.; dos Santos, P. C. P.; Petry, A.; Bailey, G. J.; Batista, I. S.; Abdu, M. A.

    2013-02-01

    We describe a new version of the Parameterized Regional Ionospheric Model (PARIM) which has been modified to include the longitudinal dependences. This model has been reconstructed using multidimensional Fourier series. To validate PARIM results, the South America maps of critical frequencies for the E (foE) and F (foF2) regions were compared with the values calculated by Sheffield Plasmasphere-Ionosphere Model (SUPIM) and IRI representations. PARIM presents very good results, the general characteristics of both regions, mainly the presence of the equatorial ionization anomaly, were well reproduced for equinoctial conditions of solar minimum and maximum. The values of foF2 and hmF2 recorded over Jicamarca (12°S; 77°W; dip lat. 1°N; mag. declination 0.3°) and sites of the conjugate point equatorial experiment (COPEX) campaign Boa Vista (2.8°N; 60.7°W; dip lat. 11.4°; mag. declination -13.1°), Cachimbo (9.5°S; 54.8°W; dip lat. -1.8°; mag. declination -15.5°), and Campo Grande (20.4°S; 54.6°W; dip lat. -11.1°; mag. declination -14.0°) have been used in this work. foF2 calculated by PARIM show good agreement with the observations, except during morning over Boa Vista and midnight-morning over Campo Grande. Some discrepancies were also found for the F-region peak height (hmF2) near the geomagnetic equator during times of F3 layer occurrences. IRI has underestimated both foF2 and hmF2 over equatorial and low latitude sectors during evening-nighttimes, except for Jicamarca where foF2 values were overestimated.

  17. Experimental results: Pilot plant calcine dissolution and liquid feed stability

    SciTech Connect

    Herbst, R.S.; Fryer, D.S.; Brewer, K.N.; Johnson, C.K.; Todd, T.A.

    1995-02-01

    The dissolution of simulated Idaho Chemical Processing Plant pilot plant calcines, containing none of the radioactive actinides, lanthanides or fission products, was examined to evaluate the solubility of calcine matrix materials in acidic media. This study was a necessary precursor to dissolution and optimization experiments with actual radionuclide-containing calcines. The importance of temperature, nitric acid concentration, ratio of acid volume to calcine mass, and time on the amount, as a weight percentage of calcine dissolved, was evaluated. These parameters were studied for several representative pilot plant calcine types: (1) Run No. 74 Zirconia calcine; (2) Run No. 17 Zirconia/Sodium calcine; (3) Run No. 64 Zirconia/Sodium calcine; (3) Run No. 1027 Alumina calcine; and (4) Run No. 20 Alumina/Zirconia/Sodium calcine. Statistically designed experiments with the different pilot plant calcines indicated the effect of the studied process variables on the amount of calcine dissolved decreases in the order: Acid/Calcine Ratio > Temperature > HNO{sub 3} Concentration > Dissolution Time. The following conditions are suitable to achieve greater than 90 wt. % dissolution of most Zr, Al, or Na blend calcines: (1) Maximum nitric acid concentration of 5M; (2) Minimum acid/calcine ratio of 10 mL acid/1 gram calcine; (3) Minimum dissolution temperature of 90{degrees}C; and (4) Minimum dissolution time of 30 minutes. The formation of calcium sulphate (CaSO{sub 4}) precipitates was observed in certain dissolved calcine solutions during the dissolution experiments. Consequently, a study was initiated to evaluate if and under what conditions the resulting dissolved calcine solutions would be unstable with regards to precipitate formation. The results indicate that precipitate formation in the calcine solutions prepared under the above proposed dissolution conditions are not anticipated.

  18. First experimental results on the IShTAR testbed

    NASA Astrophysics Data System (ADS)

    D'Inca, R.; Jacquot, J.; Ochoukov, R.; Morgal, I.; Crombe, K.; Louche, F.; Van Eester, D.; Heuraux, S.; Devaux, S.; Moritz, J.; Faudot, E.; Fünfgelder, H.; Faugel, H.; Noterdaeme, J.-M.

    2015-12-01

    IShTAR (Ion cyclotron Sheath Test ARrangement) is a linear magnetized plasma test facility dedicated to the investigation of RF wave/plasma interaction [1] in the Ion Cyclotron Range of Frequencies (ICRF). It provides a better accessibility for the instrumentation than tokamaks while being representative of the neighboring region of the wave emitter. It is equipped with a magnetized plasma source (1 m long, 0.4 m diameter) powered by a helical antenna up to 3 kW at 11 MHz. We present the results of the first analysis of the plasma characteristics (plasma density, electron temperature) in function of the operating parameters (injected power, neutral pressure and magnetic field) as measured with fixed and movable Langmuir probes, spectrometer and cameras. The plasma is presently produced only by the helical antenna (no ICRF). We show that the plasma exists in three regime depending on the power level: the first two ones are stable and separated by a jump in density; a first spatial profile of the plasma density has been established for these modes; The third mode is unstable, characterized by strong oscillations of the plasma tube position.

  19. Experimental Results of Integrated Refrigeration and Storage System Testing

    NASA Technical Reports Server (NTRS)

    Notardonato, W. U.; Johnson, W. L.; Jumper, K.

    2009-01-01

    Launch operations engineers at the Kennedy Space Center have identified an Integrated Refrigeration and Storage system as a promising technology to reduce launch costs and enable advanced cryogenic operations. This system uses a close cycle Brayton refrigerator to remove energy from the stored cryogenic propellant. This allows for the potential of a zero loss storage and transfer system, as well and control of the state of the propellant through densification or re-liquefaction. However, the behavior of the fluid in this type of system is different than typical cryogenic behavior, and there will be a learning curve associated with its use. A 400 liter research cryostat has been designed, fabricated and delivered to KSC to test the thermo fluid behavior of liquid oxygen as energy is removed from the cryogen by a simulated DC cycle cryocooler. Results of the initial testing phase focusing on heat exchanger characterization and zero loss storage operations using liquid oxygen are presented in this paper. Future plans for testing of oxygen densification tests and oxygen liquefaction tests will also be discussed. KEYWORDS: Liquid Oxygen, Refrigeration, Storage

  20. Experimental Results on Electrorheology of Liquid Crystalline Polymer Solutions

    NASA Astrophysics Data System (ADS)

    Neves, S.; Leal, C. R.; Cidade, M. T.

    2008-07-01

    The electrorheological (ER) effect is known as the enhancement of the apparent viscosity upon application of an external electric field. Suspensions of polarizable particles in non-conducting solvents are the most studied electrorheological fluids, however, liquid crystalline materials may also present ER effect as long as their dielectric anisotropy is positive. In the liquid crystalline state of a positive dielectric anisotropy, the application of the electric field makes the director align perpendicular to the flow direction, thus increasing the apparent viscosity. In this work results of two liquid crystalline polymer solutions, acetoxypropylcellulose (APC) in dimethylacetamide (DMAc) and poly-γ-benzyl-L-glutamate (PBLG) in 1,4-dioxane, presenting opposite behavior upon application of the electric field, will be presented. APC/DMAc (negative dielectric anisotropy) presents a decrease of the apparent viscosity upon application of the electric field, as expected, while PBLG/1,4-dioxane (positive dielectric anisotropy) presents the opposite behavior. For this last solution we will present the shear flow curves for different electric fields in function of polymer molecular weight and solution concentration.

  1. The experimental results and analysis of a borehole radar prototype

    NASA Astrophysics Data System (ADS)

    Liu, Sixin; Wu, Junjun; Dong, Hang; Fu, Lei; Wang, Fei

    2012-04-01

    A prototype of borehole radar has been successfully tested in three sites for different purposes under a field condition. The objective of the prototype is providing an effective down-hole tool for detecting targets in deep boreholes situated in a relatively high conductivity area such as the metal ores. The first testing site is at a geothermal field. The fractures extending more than 20 m from the borehole are delineated by the borehole radar in the single-hole reflection mode. The second testing site is located in a jade mine for basement evaluation. The cross-hole measurement mode was used to detect the cavities made by previous unorganized mining activities. Several high-velocity anomalies were found in the velocity profile and presumably the targets of the mine shafts and tunnels. The third test site is located in a mineralized belt characterized by low resistivity less than 1000 Ohm m, the surface-borehole measurement was carried out and the data were processed with velocity tomography. The low-velocity zone corresponds to a mineralized zone from geological records. The three testing results proved the readiness of this borehole radar prototype for further deployment in more complicated and realistic field situations.

  2. Infrared thermography for CFRP inspection: computational model and experimental results

    NASA Astrophysics Data System (ADS)

    Fernandes, Henrique C.; Zhang, Hai; Morioka, Karen; Ibarra-Castanedo, Clemente; López, Fernando; Maldague, Xavier P. V.; Tarpani, José R.

    2016-05-01

    Infrared Thermography (IRT) is a well-known Non-destructive Testing (NDT) technique. In the last decades, it has been widely applied in several fields including inspection of composite materials (CM), specially the fiber-reinforced polymer matrix ones. Consequently, it is important to develop and improve efficient NDT techniques to inspect and assess the quality of CM parts in order to warranty airworthiness and, at the same time, reduce costs of airline companies. In this paper, active IRT is used to inspect carbon fiber-reinforced polymer (CFRP) at laminate with artificial inserts (built-in sample) placed on different layers prior to the manufacture. Two optical active IRT are used. The first is pulsed thermography (PT) which is the most widely utilized IRT technique. The second is a line-scan thermography (LST) technique: a dynamic technique, which can be employed for the inspection of materials by heating a component, line-by-line, while acquiring a series of thermograms with an infrared camera. It is especially suitable for inspection of large parts as well as complex shaped parts. A computational model developed using COMSOL Multiphysics® was used in order to simulate the inspections. Sequences obtained from PT and LST were processed using principal component thermography (PCT) for comparison. Results showed that it is possible to detect insertions of different sizes at different depths using both PT and LST IRT techniques.

  3. First experimental results on the IShTAR testbed

    SciTech Connect

    D’Inca, R.; Jacquot, J.; Ochoukov, R.; Morgal, I.; Fünfgelder, H.; Faugel, H.; Crombe, K.; Louche, F.; Van Eester, D.; Heuraux, S.; Devaux, S.; Moritz, J.; Faudot, E.; Noterdaeme, J.-M.

    2015-12-10

    IShTAR (Ion cyclotron Sheath Test ARrangement) is a linear magnetized plasma test facility dedicated to the investigation of RF wave/plasma interaction [1] in the Ion Cyclotron Range of Frequencies (ICRF). It provides a better accessibility for the instrumentation than tokamaks while being representative of the neighboring region of the wave emitter. It is equipped with a magnetized plasma source (1 m long, 0.4 m diameter) powered by a helical antenna up to 3 kW at 11 MHz. We present the results of the first analysis of the plasma characteristics (plasma density, electron temperature) in function of the operating parameters (injected power, neutral pressure and magnetic field) as measured with fixed and movable Langmuir probes, spectrometer and cameras. The plasma is presently produced only by the helical antenna (no ICRF). We show that the plasma exists in three regime depending on the power level: the first two ones are stable and separated by a jump in density; a first spatial profile of the plasma density has been established for these modes; The third mode is unstable, characterized by strong oscillations of the plasma tube position.

  4. Impact ejecta dynamics in an atmosphere - Experimental results and extrapolations

    NASA Technical Reports Server (NTRS)

    Schultz, P. H.; Gault, D. E.

    1982-01-01

    It is noted that the impacts of 0.635-cm aluminum projectiles at 6 km/sec into fine pumice dust, at 1 atm, generate a ball of ionized gas behind an expanding curtain of upward moving ejecta. The gas ball forms a toroid which dissolves as it is driven along the interior of the ejecta curtain, by contrast to near-surface explosions in which a fireball envelops early-time crater growth. High frame rate Schlieren photographs show that the atmosphere at the base of the ejecta curtain is initially turbulent, but later forms a vortex. These experiments suggest that although small size ejecta may be decelerated by air drag, they are not simply lofted and suspended but become incorporated in an ejecta cloud that is controlled by air flow which is produced by the response of the atmosphere to the impact. The extrapolation of these results to large body impacts on the earth suggests such contrasts with laboratory experiments as a large quantity of impact-generated vapor, the supersonic advance of the ejecta curtain, the lessened effect of air drag due to the tenuous upper atmosphere, and the role of secondary cratering.

  5. Bridge Testing With Ground-Based Interferometric Radar: Experimental Results

    NASA Astrophysics Data System (ADS)

    Chiara, P.; Morelli, A.

    2010-05-01

    The research of innovative non-contact techniques aimed at the vibration measurement of civil engineering structures (also for damage detection and structural health monitoring) is continuously directed to the optimization of measures and methods. Ground-Based Radar Interferometry (GBRI) represents the more recent technique available for static and dynamic control of structures and ground movements. Dynamic testing of bridges and buildings in operational conditions are currently performed: (a) to assess the conformity of the structure to the project design at the end of construction; (b) to identify the modal parameters (i.e. natural frequencies, mode shapes and damping ratios) and to check the variation of any modal parameters over the years; (c) to evaluate the amplitude of the structural response to special load conditions (i.e. strong winds, earthquakes, heavy railway or roadway loads). If such tests are carried out by using a non-contact technique (like GBRI), the classical issues of contact sensors (like accelerometers) are easily overtaken. This paper presents and discusses the results of various tests carried out on full-scale bridges by using a Stepped Frequency-Continuous Wave radar system.

  6. Bridge Testing With Ground-Based Interferometric Radar: Experimental Results

    SciTech Connect

    Chiara, P.; Morelli, A.

    2010-05-28

    The research of innovative non-contact techniques aimed at the vibration measurement of civil engineering structures (also for damage detection and structural health monitoring) is continuously directed to the optimization of measures and methods. Ground-Based Radar Interferometry (GBRI) represents the more recent technique available for static and dynamic control of structures and ground movements.Dynamic testing of bridges and buildings in operational conditions are currently performed: (a) to assess the conformity of the structure to the project design at the end of construction; (b) to identify the modal parameters (i.e. natural frequencies, mode shapes and damping ratios) and to check the variation of any modal parameters over the years; (c) to evaluate the amplitude of the structural response to special load conditions (i.e. strong winds, earthquakes, heavy railway or roadway loads). If such tests are carried out by using a non-contact technique (like GBRI), the classical issues of contact sensors (like accelerometers) are easily overtaken.This paper presents and discusses the results of various tests carried out on full-scale bridges by using a Stepped Frequency-Continuous Wave radar system.

  7. Sodium-layer laser-guide-star experimental results

    SciTech Connect

    Avicola, K.; Brase, J.M.; Morris, J.R.

    1994-02-01

    The authors describe a series of experiments to characterize the sodium-layer guide star that was formed with the highpower laser developed for the Lawrence Livermore National Laboratory Atomic Vapor Laser Isotope Separation program. An emission spot size of 3.0 m was measured, with an implied laser irradiance spot diameter of 2.0 m. The rms spot motion at the higher laser powers, with active beam-pointing control, was less than 0.5 arcsec and had little effect on the observed spot size under these conditions. The authors measured the resonant backscatter from the sodium layer as a function of laser power to obtain a saturation curve. With a transmitted power of 1100 W and an atmospheric transmission of 0.6, the irradiance from the guide star at the ground was 10 (photons/cm{sup 2})/ms, corresponding to a visual magnitude of 5.1. The implications for the performance of wave-front sensors with a laser guide star of this magnitude and resulting closed-loop adaptive-optics performance are discussed. 13 refs., 9 figs.

  8. EXPERIMENTAL RESULTS OF THE NEPHELINE PHASE III STUDY

    SciTech Connect

    Fox, K.; Edwards, T.

    2009-11-09

    This study is the third phase in a series of experiments designed to reduce conservatism in the model that predicts the formation of nepheline, a crystalline phase that can reduce the durability of high level waste glass. A Phase I study developed a series of glass compositions that were very durable while their nepheline discriminator values were well below the current nepheline discriminator limit of 0.62, where nepheline is predicted to crystallize upon slow cooling. A Phase II study selected glass compositions to identify any linear effects of composition on nepheline crystallization and that were restricted to regions that fell within the validation ranges of the Defense Waste Processing Facility (DWPF) Product Composition Control System (PCCS) models. However, it was not possible to identify any linear effects of composition on chemical durability performance for this set of study glasses. The results of the Phase II study alone were not sufficient to recommend modification of the current nepheline discriminator. It was recommended that the next series of experiments continue to focus not only on compositional regions where the PCCS models are considered applicable (i.e., the model validation ranges), but also be restricted to compositional regions where the only constraint limiting processing is the current nepheline discriminator. Two methods were used in selecting glasses for this Phase III nepheline study. The first was based on the relationship of the current nepheline discriminator model to the other DWPF PCCS models, and the second was based on theory of crystallization in mineral and glass melts. A series of 29 test glass compositions was selected for this study using a combination of the two approaches. The glasses were fabricated and characterized in the laboratory. After reviewing the data, the study glasses generally met the target compositions with little issue. Product Consistency Test results correlated well with the crystallization analyses in

  9. OPERA and MINOS Experimental Result Prove Big Bang Theory Invalid

    NASA Astrophysics Data System (ADS)

    Pressler, David E.

    2012-03-01

    The greatest error in the history of science is the misinterpretation of the Michelson-Morley Experiment. The speed of light was measured to travel at the same speed in all three directions (x, y, z axis) in ones own inertial reference system; however, c will always be measured as having an absolute different speed in all other inertial frames at different energy levels. Time slows down due to motion or a gravity field. Time is the rate of physical process. Speed = Distance/Time. If the time changes the distance must change. Therefore, BOTH mirrors must move towards the center of the interferometer and space must contract in all-three-directions; C-Space. Gravity is a C-Space condition, and is the cause of redshift in our universe-not motion. The universe is not expanding. OPERA results are directly indicated; at the surface of earth, the strength of the gravity field is at maximum-below the earth's surface, time and space is less distorted, C-Space; therefore, c is faster. Newtonian mechanics dictate that a spherical shell of matter at greater radii, with uniform density, produces no net force on an observer located centrally. An observer located on the sphere's surface, like our Earth's or a large sphere, like one located in a remote galaxy, will construct a picture centered on himself to be identical to the one centered inside the spherical shell of mass. Both observers will view the incoming radiation, emitted by the other observer, as redshifted, because they lay on each others radial line. The Universe is static and very old.

  10. Impact Flash Physics: Modeling and Comparisons With Experimental Results

    NASA Astrophysics Data System (ADS)

    Rainey, E.; Stickle, A. M.; Ernst, C. M.; Schultz, P. H.; Mehta, N. L.; Brown, R. C.; Swaminathan, P. K.; Michaelis, C. H.; Erlandson, R. E.

    2015-12-01

    horizontal. High-speed radiometer measurements were made of the time-dependent impact flash at wavelengths of 350-1100 nm. We will present comparisons between these measurements and the output of APL's model. The results of this validation allow us to determine basic relationships between observed optical signatures and impact conditions.

  11. Divergent targets of glycolysis and oxidative phosphorylation result in additive effects of metformin and starvation in colon and breast cancer.

    PubMed

    Marini, Cecilia; Bianchi, Giovanna; Buschiazzo, Ambra; Ravera, Silvia; Martella, Roberto; Bottoni, Gianluca; Petretto, Andrea; Emionite, Laura; Monteverde, Elena; Capitanio, Selene; Inglese, Elvira; Fabbi, Marina; Bongioanni, Francesca; Garaboldi, Lucia; Bruzzi, Paolo; Orengo, Anna Maria; Raffaghello, Lizzia; Sambuceti, Gianmario

    2016-01-01

    Emerging evidence demonstrates that targeting energy metabolism is a promising strategy to fight cancer. Here we show that combining metformin and short-term starvation markedly impairs metabolism and growth of colon and breast cancer. The impairment in glycolytic flux caused by starvation is enhanced by metformin through its interference with hexokinase II activity, as documented by measurement of 18F-fluorodeoxyglycose uptake. Oxidative phosphorylation is additively compromised by combined treatment: metformin virtually abolishes Complex I function; starvation determines an uncoupled status of OXPHOS and amplifies the activity of respiratory Complexes II and IV thus combining a massive ATP depletion with a significant increase in reactive oxygen species. More importantly, the combined treatment profoundly impairs cancer glucose metabolism and virtually abolishes lesion growth in experimental models of breast and colon carcinoma. Our results strongly suggest that energy metabolism is a promising target to reduce cancer progression. PMID:26794854

  12. Divergent targets of glycolysis and oxidative phosphorylation result in additive effects of metformin and starvation in colon and breast cancer

    PubMed Central

    Marini, Cecilia; Bianchi, Giovanna; Buschiazzo, Ambra; Ravera, Silvia; Martella, Roberto; Bottoni, Gianluca; Petretto, Andrea; Emionite, Laura; Monteverde, Elena; Capitanio, Selene; Inglese, Elvira; Fabbi, Marina; Bongioanni, Francesca; Garaboldi, Lucia; Bruzzi, Paolo; Orengo, Anna Maria; Raffaghello, Lizzia; Sambuceti, Gianmario

    2016-01-01

    Emerging evidence demonstrates that targeting energy metabolism is a promising strategy to fight cancer. Here we show that combining metformin and short-term starvation markedly impairs metabolism and growth of colon and breast cancer. The impairment in glycolytic flux caused by starvation is enhanced by metformin through its interference with hexokinase II activity, as documented by measurement of 18F-fluorodeoxyglycose uptake. Oxidative phosphorylation is additively compromised by combined treatment: metformin virtually abolishes Complex I function; starvation determines an uncoupled status of OXPHOS and amplifies the activity of respiratory Complexes II and IV thus combining a massive ATP depletion with a significant increase in reactive oxygen species. More importantly, the combined treatment profoundly impairs cancer glucose metabolism and virtually abolishes lesion growth in experimental models of breast and colon carcinoma. Our results strongly suggest that energy metabolism is a promising target to reduce cancer progression. PMID:26794854

  13. An Experimental Evaluation of Hyperactivity and Food Additives. 1977-Phase I.

    ERIC Educational Resources Information Center

    Harley, J. Preston

    Reported are findings of a study involving 46 families in which the effect of the Feingold (additive free) diet on hyperactivity in preschool and elementary age children was investigated. Eleven sections cover the following project components: introduction (definition of hyperactivity and the B. Feingold hypothesis), methodology, demographic…

  14. Teaching Young Children Decomposition Strategies to Solve Addition Problems: An Experimental Study

    ERIC Educational Resources Information Center

    Cheng, Zi-Juan

    2012-01-01

    The ability to count has traditionally been considered an important milestone in children's development of number sense. However, using counting (e.g., counting on, counting all) strategies to solve addition problems is not the best way for children to achieve their full mathematical potential and to prepare them to develop more complex and…

  15. RESPONSE OF BENTHIC COMMUNITIES IN MERL EXPERIMENTAL ECOSYSTEMS TO LOW LEVEL, CHRONIC ADDITIONS OF NO. 2 FUEL OIL

    EPA Science Inventory

    The macrofauna and meiofauna of three oiled and three control experimental ecosystems at the Marine Ecosystems Research Laboratory were followed for 25 weeks of semi-continuous additions of an oil-water dispersion of No. 2 fuel oil. Water column hydrocarbon levels were maintained...

  16. Indolyne Experimental and Computational Studies: Synthetic Applications and Origins of Selectivities of Nucleophilic Additions

    PubMed Central

    Im, G-Yoon J.; Bronner, Sarah M.; Goetz, Adam E.; Paton, Robert S.; Cheong, Paul H.-Y.; Houk, K. N.; Garg, Neil K.

    2010-01-01

    Efficient syntheses of 4,5-, 5,6-, and 6,7-indolyne precursors beginning from commercially available hydroxyindole derivatives are reported. The synthetic routes are versatile and allow access to indolyne precursors that remain unsubstituted on the pyrrole ring. Indolynes can be generated under mild fluoride-mediated conditions, trapped by a variety of nucleophilic reagents, and used to access a number of novel substituted indoles. Nucleophilic addition reactions to indolynes proceed with varying degrees of regioselectivity; distortion energies control regioselectivity and provide a simple model to predict the regioselectivity in the nucleophilic additions to indolynes and other unsymmetrical arynes. This model has led to the design of a substituted 4,5-indolyne that exhibits enhanced nucleophilic regioselectivity. PMID:21114321

  17. Nitrogen Addition as a Result of Long-Term Root Removal Affects Soil Organic Matter Dynamics

    NASA Astrophysics Data System (ADS)

    Crow, S. E.; Lajtha, K.

    2004-12-01

    A long-term field litter manipulation site was established in a mature coniferous forest stand at the H.J. Andrews Experimental Forest, OR, USA in 1997 in order to address how detrital inputs influence soil organic matter formation and accumulation. Soils at this site are Andisols and are characterized by high carbon (C) and low nitrogen (N) contents, due largely to the legacy of woody debris and extremely low atmospheric N deposition. Detrital treatments include trenching to remove roots, doubling wood and needle litter, and removing aboveground litter. In order to determine whether five years of detrital manipulation had altered organic matter quantity and lability at this site, soil from the top 0-5 cm of the A horizon was density fractionated to separate the labile light fraction (LF) from the more recalcitrant mineral soil in the heavy fraction (HF). Both density fractions and whole soils were incubated for one year in chambers designed such that repeated measurements of soil respiration and leachate chemistry could be made. Trenching resulted in the removal of labile root inputs from root exudates and turnover of fine roots and active mycorrhizal communities as well as an increase of available N by removing plant uptake. Since 1999, soil solution chemistry from tension lysimeters has shown greater total N and dissolved organic nitrogen (DON) flux and less dissolved organic carbon (DOC) flux to stream flow in the trenched plots relative to the other detrital treatments. C/N ratio and C content of both light and heavy fractions from the trenched plots were greater than other detrital treatments. In the lab incubation, over the course of a year C mineralization from these soils was suppressed. Cumulative DOC losses and CO2 efflux both were significantly less in soils from trenched plots than in other detrital treatments including controls. After day 150 of the incubation, leachates from the HF of plots with trenched treatments had a DOC/DON ratio significantly

  18. Shock-implanted noble gases. II - Additional experimental studies and recognition in naturally shocked terrestrial materials

    NASA Astrophysics Data System (ADS)

    Bogard, D.; Horz, F.; Johnson, P.

    1989-06-01

    The process by which ambient gases can be implanted into silicates by shocks was investigated by analyzing the noble-gas content of several experimentally and naturally shocked silicate samples. The retentivity of shock-implanted gas during stepwise heating in the laboratory was defined in terms of two parameters, namely, the activation energy for diffusion and the extraction temperature at which 50 percent of the gas is released, both of which correlate with the shock pressure. The experiments indicate that, with increasing shock pressure, gas implantation occurs through an increasing production of microcracks/defects in the silicate lattice. The degree of annealing of these defects control the degree of diffusive loss of implanted gas.

  19. TANK 40 FINAL SB5 CHEMICAL CHARACTERIZATION RESULTS PRIOR TO NP ADDITION

    SciTech Connect

    Bannochie, C.; Click, D.

    2010-01-06

    A sample of Sludge Batch 5 (SB5) was pulled from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). This sample was also analyzed for chemical composition including noble metals. Prior to radionuclide inventory analyses, a final sample of the H-canyon Np stream will be added to bound the Np addition anticipated for Tank 40. These analyses along with the WAPS radionuclide analyses will help define the composition of the sludge in Tank 40 that is currently being fed to DWPF as SB5. At the Savannah River National Laboratory (SRNL) the 3-L Tank 40 SB5 sample was transferred from the shipping container into a 4-L high density polyethylene vessel and solids allowed to settle overnight. Supernate was then siphoned off and circulated through the shipping container to complete the transfer of the sample. Following thorough mixing of the 3-L sample, a 239 g sub-sample was removed. This sub-sample was then utilized for all subsequent analytical samples. Eight separate aliquots of the slurry were digested, four with HNO{sub 3}/HCl (aqua regia) in sealed Teflon{reg_sign} vessels and four in Na{sub 2}O{sub 2} (alkali or peroxide fusion) using Zr crucibles. Due to the use of Zr crucibles and Na in the peroxide fusions, Na and Zr cannot be determined from this preparation. Additionally, other alkali metals, such as Li and K that may be contaminants in the Na{sub 2}O{sub 2} are not determined from this preparation. Three Analytical Reference Glass - 14 (ARG-1) standards were digested along with a blank for each preparation. The ARG-1 glass allows for an assessment of the completeness of each digestion. Each aqua regia digestion and blank was diluted to 1:100 mL with deionized water and submitted to Analytical Development (AD) for inductively coupled plasma - atomic emission spectroscopy (ICPAES) analysis, inductively coupled plasma - mass spectrometry (ICP-MS) analysis of masses 81-209 and 230

  20. TANK 40 FINAL SB5 CHEMICAL CHARACTERIZATION RESULTS PRIOR TO NP ADDITION

    SciTech Connect

    Bannochie, C; Damon Click, D

    2009-02-26

    A sample of Sludge Batch 5 (SB5) was pulled from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). This sample was also analyzed for chemical composition including noble metals. Prior to radionuclide inventory analyses, a final sample of the H-canyon Np stream will be added to bound the Np addition anticipated for Tank 40. These analyses along with the WAPS radionuclide analyses will help define the composition of the sludge in Tank 40 that is currently being fed to DWPF as SB5. At the Savannah River National Laboratory (SRNL) the 3-L Tank 40 SB5 sample was transferred from the shipping container into a 4-L high density polyethylene vessel and solids allowed to settle overnight. Supernate was then siphoned off and circulated through the shipping container to complete the transfer of the sample. Following thorough mixing of the 3-L sample, a 239 g sub-sample was removed. This sub-sample was then utilized for all subsequent analytical samples. Eight separate aliquots of the slurry were digested, four with HNO{sub 3}/HCl (aqua regia) in sealed Teflon{reg_sign} vessels and four in Na{sub 2}O{sub 2} (alkali or peroxide fusion) using Zr crucibles. Due to the use of Zr crucibles and Na in the peroxide fusions, Na and Zr cannot be determined from this preparation. Additionally, other alkali metals, such as Li and K that may be contaminants in the Na{sub 2}O{sub 2} are not determined from this preparation. Three Analytical Reference Glass-1 (ARG-1) standards were digested along with a blank for each preparation. The ARG-1 glass allows for an assessment of the completeness of each digestion. Each aqua regia digestion and blank was diluted to 1:100 mL with deionized water and submitted to Analytical Development (AD) for inductively coupled plasma--atomic emission spectroscopy (ICPAES) analysis, inductively coupled plasma--mass spectrometry (ICP-MS) analysis of masses 81-209 and 230

  1. Impact of methylene blue in addition to norepinephrine on the intestinal microcirculation in experimental septic shock.

    PubMed

    Nantais, Jordan; Dumbarton, Tristan C; Farah, Nizam; Maxan, Alexander; Zhou, Juan; Minor, Samuel; Lehmann, Christian

    2014-01-01

    Methylene blue (MB) has been used with some success as a treatment for the vasoplegia of vasopressor-refractory septic shock. The putative mechanism of action of MB is the inhibition of endothelial nitric oxide within the microvasculature and improved responsiveness to endogenous catecholamines (norepinephrine (NE)). However, to date, no study has demonstrated the microcirculatory effect of methylene blue in septic shock. The objective of this randomized, controlled, animal study was to show, in an experimentally-induced, septic shock model in rats, the effects of MB and NE on global hemodynamics and the microcirculation. Mean arterial pressure (MAP) was drastically reduced following bacterial endotoxin (lipopolysaccharide, LPS) administration in animals not receiving vasopressors. Only the combination of NE + MB restored MAP to control levels by the end of the three hour experiment. Intravital microscopy of the microcirculation was performed in the terminal ileum in order to examine functional capillary density in intestinal muscle layers and the mucosa, as well as leukocyte activation in venules (rolling, adhesion to the endothelium). Untreated LPS animals showed a significant increase in leukocyte adhesion and a decrease in capillary perfusion in the intestinal microcirculation. In groups receiving NE or NE+MB, we observed a significant decrease in leukocyte adhesion and improved functional capillary density, indicating that microvasculature function was improved. This study suggests that methylene blue may be able to improve hemodynamics while preserving microvascular function in septic shock. PMID:25227191

  2. Speech Perception Results for Children Using Cochlear Implants Who Have Additional Special Needs

    ERIC Educational Resources Information Center

    Dettman, Shani J.; Fiket, Hayley; Dowell, Richard C.; Charlton, Margaret; Williams, Sarah S.; Tomov, Alexandra M.; Barker, Elizabeth J.

    2004-01-01

    Speech perception outcomes in young children with cochlear implants are affected by a number of variables including the age of implantation, duration of implantation, mode of communication, and the presence of a developmental delay or additional disability. The aim of this study is to examine the association between degree of developmental delay…

  3. Comparison of Computational and Experimental Microphone Array Results for an 18%-Scale Aircraft Model

    NASA Technical Reports Server (NTRS)

    Lockard, David P.; Humphreys, William M.; Khorrami, Mehdi R.; Fares, Ehab; Casalino, Damiano; Ravetta, Patricio A.

    2015-01-01

    An 18%-scale, semi-span model is used as a platform for examining the efficacy of microphone array processing using synthetic data from numerical simulations. Two hybrid RANS/LES codes coupled with Ffowcs Williams-Hawkings solvers are used to calculate 97 microphone signals at the locations of an array employed in the NASA LaRC 14x22 tunnel. Conventional, DAMAS, and CLEAN-SC array processing is applied in an identical fashion to the experimental and computational results for three different configurations involving deploying and retracting the main landing gear and a part span flap. Despite the short time records of the numerical signals, the beamform maps are able to isolate the noise sources, and the appearance of the DAMAS synthetic array maps is generally better than those from the experimental data. The experimental CLEAN-SC maps are similar in quality to those from the simulations indicating that CLEAN-SC may have less sensitivity to background noise. The spectrum obtained from DAMAS processing of synthetic array data is nearly identical to the spectrum of the center microphone of the array, indicating that for this problem array processing of synthetic data does not improve spectral comparisons with experiment. However, the beamform maps do provide an additional means of comparison that can reveal differences that cannot be ascertained from spectra alone.

  4. Low pollution combustor designs for CTOL engines - Results of the Experimental Clean Combustor Program

    NASA Technical Reports Server (NTRS)

    Roberts, R.; Peduzzi, A.; Niedzwiecki, R. W.

    1976-01-01

    The NASA/Pratt & Whitney Aircraft Experimental Clean Combustor Program is a multi-year, major contract effort. Primary program objectives are the generation of combustor technology for development of advanced commercial CTOL engines with lower exhaust emissions than current aircraft and demonstration of this technology in a full-scale JT9D engine in 1976. This paper describes the pollution and performance goals, Phase I and II test results, and the Phase III combustor hardware, pollution sampling techniques, and test plans. Best results were obtained with the Vorbix concept which employs multiple burning zones and improved fuel preparation and distribution. Substantial reductions were achieved in all pollutant categories, meeting the 1979 EPA standards for NOx, THC, and smoke when extrapolated to JT9D cycle conditions. The Vorbix concept additionally demonstrated the capability for acceptable altitude relight and did not appear to have unsolvable durability or exit temperature distribution problems.

  5. Effects of Experimental Nitrogen and Phosphorus Addition on Litter Decomposition in an Old-Growth Tropical Forest

    PubMed Central

    Chen, Hao; Dong, Shaofeng; Liu, Lei; Ma, Chuan; Zhang, Tao; Zhu, Xiaomin; Mo, Jiangming

    2013-01-01

    The responses of litter decomposition to nitrogen (N) and phosphorus (P) additions were examined in an old-growth tropical forest in southern China to test the following hypotheses: (1) N addition would decrease litter decomposition; (2) P addition would increase litter decomposition, and (3) P addition would mitigate the inhibitive effect of N addition. Two kinds of leaf litter, Schima superba Chardn. & Champ. (S.S.) and Castanopsis chinensis Hance (C.C.), were studied using the litterbag technique. Four treatments were conducted at the following levels: control, N-addition (150 kg N ha−1 yr−1), P-addition (150 kg P ha−1 yr−1) and NP-addition (150 kg N ha−1 yr−1 plus 150 kg P ha−1 yr−1). While N addition significantly decreased the decomposition of both litters, P addition significantly inhibited decomposition of C.C., but did not affect the decomposition of S.S. The negative effect of N addition on litter decomposition might be related to the high N-saturation in this old-growth tropical forest; however, the negative effect of P addition might be due to the suppression of “microbial P mining”. Significant interaction between N and P addition was found on litter decomposition, which was reflected by the less negative effect in NP-addition plots than those in N-addition plots. Our results suggest that P addition may also have negative effect on litter decomposition and that P addition would mitigate the negative effect of N deposition on litter decomposition in tropical forests. PMID:24391895

  6. Impulsivity in Multiplayer Online Battle Arena Gamers: Preliminary Results on Experimental and Self-Report Measures.

    PubMed

    Nuyens, Filip; Deleuze, Jory; Maurage, Pierre; Griffiths, Mark D; Kuss, Daria J; Billieux, Joël

    2016-06-01

    Background and aims Multiplayer Online Battle Arena (MOBA) games have become the most popular type of video games played worldwide, superseding the playing of Massively Multiplayer Online Role-Playing Games and First-Person Shooter games. However, empirical studies focusing on the use and abuse of MOBA games are still very limited, particularly regarding impulsivity, which is an indicator of addictive states but has not yet been explored in MOBA games. In this context, the objective of the present study is to explore the associations between impulsivity and symptoms of addictive use of MOBA games in a sample of highly involved League of Legends (LoL, currently the most popular MOBA game) gamers. Methods Thirty-six LoL gamers were recruited and completed both experimental (Single Key Impulsivity Paradigm) and self-reported impulsivity assessments (s-UPPS-P Impulsive Behavior Scale, Barratt Impulsiveness Scale), in addition to an assessment of problematic video game use (Problematic Online Gaming Questionnaire). Results Results showed links between impulsivity-related constructs and signs of excessive MOBA game involvement. Findings indicated that impaired ability to postpone rewards in an experimental laboratory task was strongly related to problematic patterns of MOBA game involvement. Although less consistent, several associations were also found between self-reported impulsivity traits and signs of excessive MOBA game involvement. Conclusions Despite these results are preliminary and based upon a small (self-selected) sample, the present study highlights potential psychological factors related to the addictive use of MOBA games. PMID:27156376

  7. Spinel dissolution via addition of glass forming chemicals. Results of preliminary experiments

    SciTech Connect

    Fox, K. M.; Johnson, F. C.

    2015-11-01

    Increased loading of high level waste in glass can lead to crystallization within the glass. Some crystalline species, such as spinel, have no practical impact on the chemical durability of the glass, and therefore may be acceptable from both a processing and a product performance standpoint. In order to operate a melter with a controlled amount of crystallization, options must be developed for remediating an unacceptable accumulation of crystals. This report describes preliminary experiments designed to evaluate the ability to dissolve spinel crystals in simulated waste glass melts via the addition of glass forming chemicals (GFCs).

  8. Prolonged durability of electroporation microarrays as a result of addition of saccharides to nucleic acids.

    PubMed

    Fujimoto, Hiroyuki; Kato, Koichi; Iwata, Hiroo

    2009-01-01

    The electroporation microarray is a useful tool for high-throughput analysis of gene functions. However, transfection efficiency is greatly impaired by storage of the microarrays, due to water evaporation from arrayed nucleotides. In this study, we aimed at evaluating the effect of saccharides and sugar alcohols, added to the solution of the plasmid DNA or small interfering RNA (siRNA). Microarrays loaded with plasmids and siRNAs were prepared with various polyols including sugars and sugar alcohols. After storage of these microarrays at different temperatures for various time periods, transfection efficiency was evaluated using human embryonic kidney cells. In the case of plasmid-loaded microarrays, addition of monosaccharides (glucose, fructose), disaccharides (trehalose, sucrose), and trisaccharide (raffinose) served to retain transfection efficiency at a reasonably high level after storage at -20 degrees C. The observed effects may be because moisture retention serves to maintain the solubility of DNA. In contrast, polysaccharide (dextran) and sugar alcohol (glycerol) had insignificant effects on retention of transfection efficiency. On the other hand, addition of saccharides and sugar alcohols had insignificant effects on the transfection of siRNA after storage of a microarray at 25 degrees C for 7 days, presumably due to the intrinsically-high solubility of siRNA which consists of short nucleotides. PMID:18989662

  9. Additional weight load increases freezing of gait episodes in Parkinson's disease; an experimental study.

    PubMed

    Mensink, Senja H G; Nonnekes, Jorik; van Bon, Geert; Snijders, Anke H; Duysens, Jacques; Weerdesteyn, Vivian; Bloem, Bastiaan R; Oude Nijhuis, Lars B

    2014-05-01

    Freezing of gait is an episodic gait disorder,characterized by the inability to generate effective forward stepping movements. The pathophysiology underlying freezing of gait remains insufficiently understood, and this hampers the development of better treatment strategies.Preliminary evidence suggests that impaired force control during walking may contribute to freezing episodes, with difficulty to unload the swing leg and initiate the swing phase. Here, we used external loading to manipulate force control and to investigate its influence on freezing of gait.Twelve Parkinson's disease patients with freezing of gait performed three contrasting tasks: (1) loaded gait while wearing a belt fortified with lead weights; (2) weight supported gait using a parachute harness connected to a rigid metal cable running above the gait trajectory; and (3)normal gait. Gait tasks were used to provoke freezing episodes, including rapid 360° turns. Freezing episodes were quantified using blinded, videotaped clinical assessment. Furthermore, ground reaction forces and body kinematics were recorded. Loading significantly increased the mean number of freezing episodes per trial compared to the normal gait condition (P<0.05), but the effect of weight support was not consistent. Loading particularly increased the number of freezing episodes during rapid short steps. Step length was significantly smaller during loaded gait compared to normal gait (P<0.05), but changes in anticipatory postural adjustments were not different.Our results may point to impaired force control playing a key role in freezing of gait. Future studies should further investigate the mechanism, i.e., the contribution of deficient load feedback, and evaluate which forms of weight support might offer treatment opportunities. PMID:24658705

  10. Rainfall estimation using microwave links. Results from an experimental setup in Luxembourg

    NASA Astrophysics Data System (ADS)

    Fenicia, Fabrizio; Matgen, Patrick; Pfister, Laurent

    2010-05-01

    Microwave links represent a valid alternative to traditional rainfall estimation methods. They are commonly used in mobile phone communication, and they constitute built-in widely distributed networks. Due to their ability of providing high temporal and spatial resolution measurements, their use is particularly suitable in urban settings. We here show results from an experimental setup in Luxembourg City, where two dual frequency links have been installed. The links cover a distance of about 4km, and measure power attenuation at 1 min. timestep. The links have been equipped with several recording raingauges, which measure rainfall in real-time communicating through a wireless connection. This set-up has been used to analyze in detail the mapping between attenuation and rainfall intensity, and gain insights into the potential accuracy of these instruments. In addition, we investigated the relation between rainfall and discharge response of the urban area of Luxembourg, which shows the potential utility of high frequency rainfall measurements for urban environments.

  11. Inter-species extrapolation of skin heating resulting from millimeter wave irradiation: modeling and experimental results.

    PubMed

    Nelson, D A; Walters, T J; Ryan, K L; Emerton, K B; Hurt, W D; Ziriax, J M; Johnson, L R; Mason, P A

    2003-05-01

    This study reports measurements of the skin surface temperature elevations during localized irradiation (94 GHz) of three species: rat (irradiated on lower abdomen), rhesus monkey (posterior forelimb), and human (posterior forearm). Two exposure conditions were examined: prolonged, low power density microwaves (LPM) and short-term, high power density microwaves (HPM). Temperature histories were compared with calculations from a bio-heat transfer model. The mean peak surface temperature increase was approximately 7.0 degrees C for the short-term HPM exposures for all three species/locations, and 8.5 degrees C (monkey, human) to 10.5 degrees C (rat) for the longer-duration LPM exposures. The HPM temperature histories are in close agreement with a one-dimensional conduction heat transfer model with negligible blood flow. The LPM temperature histories were compared with calculations from the bio-heat model, evaluated for various (constant) blood flow rates. Results suggest a variable blood flow model, reflecting a dynamic thermoregulatory response, may be more suited to describing skin surface temperature response under long-duration MMW irradiation. PMID:12747480

  12. One component metal sintering additive for {beta}-SiC based on thermodynamic calculation and experimental observations

    SciTech Connect

    Noviyanto, Alfian; Yoon, Dang-Hyok

    2011-08-15

    Graphical abstract: . Standard Gibbs formation free energies vs. temperature for various metal carbides. The heavy line represents the standard Gibbs free energy for {beta}-SiC. The hatched area denotes the typical liquid phase hot pressing temperature of {beta}-SiC (1973-2123 K). Highlights: {yields} Various metal elements were examined as a sintering additive for {beta}-SiC. {yields} Al and Mg enhanced the density significantly without decomposing {beta}-SiC, as predicted by thermodynamic simulation. {yields} Cr, Fe, Ta, Ti, V and W additives formed metal carbide and/or silicide compounds by decomposing {beta}-SiC. {yields} This approach would be useful for selecting effective sintering additive for high temperature ceramics. -- Abstract: Various types of metals were examined as sintering additives for {beta}-SiC by considering the standard Gibbs formation free energy and vapor pressure under hot pressing conditions (1973-2123 K), particularly for applications in nuclear reactors. Metallic elements having the low long-term activation under neutron irradiation condition, such as Cr, Fe, Ta, Ti, V and W, as well as widely used elements, Al, Mg and B, were considered. The conclusions drawn from thermodynamic considerations were compared with the experimental observations. Al and Mg were found to be effective sintering additives, whereas the others were not due to the formation of metal carbides or silicides from the decomposition of SiC under hot pressing conditions.

  13. XLF deficiency results in reduced N-nucleotide addition during V(D)J recombination

    PubMed Central

    IJspeert, Hanna; Rozmus, Jacob; Schwarz, Klaus; Warren, René L.; van Zessen, David; Holt, Robert A.; Pico-Knijnenburg, Ingrid; Simons, Erik; Jerchel, Isabel; Wawer, Angela; Lorenz, Myriam; Patıroğlu, Turkan; Akar, Himmet Haluk; Leite, Ricardo; Verkaik, Nicole S.; Stubbs, Andrew P.; van Gent, Dik C.; van Dongen, Jacques J. M.

    2016-01-01

    Repair of DNA double-strand breaks (DSBs) by the nonhomologous end-joining pathway (NHEJ) is important not only for repair of spontaneous breaks but also for breaks induced in developing lymphocytes during V(D)J (variable [V], diversity [D], and joining [J] genes) recombination of their antigen receptor loci to create a diverse repertoire. Mutations in the NHEJ factor XLF result in extreme sensitivity for ionizing radiation, microcephaly, and growth retardation comparable to mutations in LIG4 and XRCC4, which together form the NHEJ ligation complex. However, the effect on the immune system is variable (mild to severe immunodeficiency) and less prominent than that seen in deficiencies of NHEJ factors ARTEMIS and DNA-dependent protein kinase catalytic subunit, with defects in the hairpin opening step, which is crucial and unique for V(D)J recombination. Therefore, we aimed to study the role of XLF during V(D)J recombination. We obtained clinical data from 9 XLF-deficient patients and performed immune phenotyping and antigen receptor repertoire analysis of immunoglobulin (Ig) and T-cell receptor (TR) rearrangements, using next-generation sequencing in 6 patients. The results were compared with XRCC4 and LIG4 deficiency. Both Ig and TR rearrangements showed a significant decrease in the number of nontemplated (N) nucleotides inserted by terminal deoxynucleotidyl transferase, which resulted in a decrease of 2 to 3 amino acids in the CDR3. Such a reduction in the number of N-nucleotides has a great effect on the junctional diversity, and thereby on the total diversity of the Ig and TR repertoire. This shows that XLF has an important role during V(D)J recombination in creating diversity of the repertoire by stimulating N-nucleotide insertion. PMID:27281794

  14. XLF deficiency results in reduced N-nucleotide addition during V(D)J recombination.

    PubMed

    IJspeert, Hanna; Rozmus, Jacob; Schwarz, Klaus; Warren, René L; van Zessen, David; Holt, Robert A; Pico-Knijnenburg, Ingrid; Simons, Erik; Jerchel, Isabel; Wawer, Angela; Lorenz, Myriam; Patıroğlu, Turkan; Akar, Himmet Haluk; Leite, Ricardo; Verkaik, Nicole S; Stubbs, Andrew P; van Gent, Dik C; van Dongen, Jacques J M; van der Burg, Mirjam

    2016-08-01

    Repair of DNA double-strand breaks (DSBs) by the nonhomologous end-joining pathway (NHEJ) is important not only for repair of spontaneous breaks but also for breaks induced in developing lymphocytes during V(D)J (variable [V], diversity [D], and joining [J] genes) recombination of their antigen receptor loci to create a diverse repertoire. Mutations in the NHEJ factor XLF result in extreme sensitivity for ionizing radiation, microcephaly, and growth retardation comparable to mutations in LIG4 and XRCC4, which together form the NHEJ ligation complex. However, the effect on the immune system is variable (mild to severe immunodeficiency) and less prominent than that seen in deficiencies of NHEJ factors ARTEMIS and DNA-dependent protein kinase catalytic subunit, with defects in the hairpin opening step, which is crucial and unique for V(D)J recombination. Therefore, we aimed to study the role of XLF during V(D)J recombination. We obtained clinical data from 9 XLF-deficient patients and performed immune phenotyping and antigen receptor repertoire analysis of immunoglobulin (Ig) and T-cell receptor (TR) rearrangements, using next-generation sequencing in 6 patients. The results were compared with XRCC4 and LIG4 deficiency. Both Ig and TR rearrangements showed a significant decrease in the number of nontemplated (N) nucleotides inserted by terminal deoxynucleotidyl transferase, which resulted in a decrease of 2 to 3 amino acids in the CDR3. Such a reduction in the number of N-nucleotides has a great effect on the junctional diversity, and thereby on the total diversity of the Ig and TR repertoire. This shows that XLF has an important role during V(D)J recombination in creating diversity of the repertoire by stimulating N-nucleotide insertion. PMID:27281794

  15. Methyl iodide oxidative addition to [Rh(acac)(CO)(PPh3)]: an experimental and theoretical study of the stereochemistry of the products and the reaction mechanism.

    PubMed

    Conradie, Marrigje M; Conradie, Jeanet

    2011-08-28

    Density functional theory was used to investigate the oxidative addition and subsequent carbonyl insertion and deinsertion steps of the reaction of methyl iodide to a rhodium(I) acetylacetonato complex of the formula [Rh(acac)(CO)(PPh(3))] (Hacac = acetylacetone). This process has been studied experimentally for many rhodium β-diketonato complexes, but, to the best of our knowledge, this is the first systematic computational study of the complete reaction sequence. Experimental (1)H techniques complement the theoretical results on the stereochemistry of the reaction intermediates and products. (1)H NMR also revealed the existence of a second rhodium(III)-acyl product, which has not been previously observed in this reaction. The calculated Gibbs free energy of activation of the oxidative addition reaction is 71 kJ mol(-1), which is in agreement with the experimental value of 82(1) kJ mol(-1). The DFT-calculated oxidative addition corresponds to an associative S(N)2 nucleophilic attack by the rhodium metal centre on the methyl iodide, which is in agreement with calculated and experimental (in brackets) activation parameters of the reaction, 27 (38.8) kJ mol(-1) for ΔH((≠)) and -147 (-146) J K(-1) mol(-1) for ΔS((≠)). PMID:21761056

  16. Aircraft-Produced Ice Particles (APIPs): Additional Results and Further Insights.

    NASA Astrophysics Data System (ADS)

    Woodley, William L.; Gordon, Glenn; Henderson, Thomas J.; Vonnegut, Bernard; Rosenfeld, Daniel; Detwiler, Andrew

    2003-05-01

    This paper presents new results from studies of aircraft-produced ice particles (APIPs) in supercooled fog and clouds. Nine aircraft, including a Beech King Air 200T cloud physics aircraft, a Piper Aztec, a Cessna 421-C, two North American T-28s, an Aero Commander, a Piper Navajo, a Beech Turbo Baron, and a second four-bladed King Air were involved in the tests. The instrumented King Air served as the monitoring aircraft for trails of ice particles created, or not created, when the other aircraft were flown through clouds at various temperatures and served as both the test and monitoring aircraft when it itself was tested. In some cases sulfur hexafluoride (SF6) gas was released by the test aircraft during its test run and was detected by the King Air during its monitoring passes to confirm the location of the test aircraft wake. Ambient temperatures for the tests ranged between 5° and 12°C. The results confirm earlier published results and provide further insights into the APIPs phenomenon. The King Air at ambient temperatures less than 8°C can produce APIPs readily. The Piper Aztec and the Aero Commander also produced APIPs under the test conditions in which they were flown. The Cessna 421, Piper Navajo, and Beech Turbo Baron did not. The APIPs production potential of a T-28 is still indeterminate because a limited range of conditions was tested. Homogeneous nucleation in the adiabatically cooled regions where air is expanding around the rapidly rotating propeller tips is the cause of APIPs. An equation involving the propeller efficiency, engine thrust, and true airspeed of the aircraft is used along with the published thrust characteristics of the propellers to predict when the aircraft will produce APIPs. In most cases the predictions agree well with the field tests. Of all of the aircraft tested, the Piper Aztec, despite its small size and low horsepower, was predicted to be the most prolific producer of APIPs, and this was confirmed in field tests. The

  17. Preliminary results of the LLNL airborne experimental test-bed SAR system

    SciTech Connect

    Miller, M.G.; Mullenhoff, C.J.; Kiefer, R.D.; Brase, J.M.; Wieting, M.G.; Berry, G.L.; Jones, H.E.

    1996-01-16

    The Imaging and Detection Program (IDP) within Laser Programs at Lawrence Livermore National Laboratory (LLNL) in cooperation with the Hughes Aircraft Company has developed a versatile, high performance, airborne experimental test-bed (AETB) capability. The test-bed has been developed for a wide range of research and development experimental applications including radar and radiometry plus, with additional aircraft modifications, optical systems. The airborne test-bed capability has been developed within a Douglas EA-3B Skywarrior jet aircraft provided and flown by Hughes Aircraft Company. The current test-bed payload consists of an X-band radar system, a high-speed data acquisition, and a real-time processing capability. The medium power radar system is configured to operate in a high resolution, synthetic aperture radar (SAR) mode and is highly configurable in terms of waveforrns, PRF, bandwidth, etc. Antennas are mounted on a 2-axis gimbal in the belly radome of the aircraft which provides pointing and stabilization. Aircraft position and antenna attitude are derived from a dedicated navigational system and provided to the real-time SAR image processor for instant image reconstruction and analysis. This paper presents a further description of the test-bed and payload subsystems plus preliminary results of SAR imagery.

  18. Fate and Transport of Graphene Oxide in Granular Porous Media: Experimental Results and Modeling

    NASA Astrophysics Data System (ADS)

    Gao, Bin

    2014-05-01

    Although graphene oxide (GO) has been used in many applications to improve human life quality, its environmental fate and behavior are still largely unknown. In this work, a range of laboratory experiments were conducted to explore the aggregation, deposition, and transport mechanisms of GO nano-sheets in porous media under various conditions. Stability experimental data showed that both cation valence and pH showed significant effect on the aggregation of GO sheets. The measured critical coagulation concentrations were in good agreement with the predictions of the extended Schulze-Hardy rule. Sand column experimental results indicated that deposition and transport of GO in porous media were strongly dependent on solution ionic strength. Particularly, GO showed high mobility under low ionic strength conditions in both saturated and unsaturated columns. Increasing ionic strength dramatically increased the retention of GO in porous media, mainly through secondary-minimum deposition. Recovery rates of GO in unsaturated sand columns were lower than that in saturated columns under the same ionic strength conditions, suggesting moisture content also played an important role in the retention of GO in porous media. Findings from the bubble column experiments showed that the GO did not attach to the air-water interface, which is consistent with the XDLVO predictions. Additional retention mechanisms, such as film straining, thus could be responsible to the reduced mobility of GO in unsaturated porous media. The breakthrough curves of GO in saturated and unsaturated columns could be accurately simulated by an advection-dispersion-reaction model.

  19. Experimental additions of aluminum sulfate and ammonium nitrate to in situ mesocosms to reduce cyanobacterial biovolume and microcystin concentration

    USGS Publications Warehouse

    Harris, Ted D.; Wilhelm, Frank M.; Graham, Jennifer L.; Loftin, Keith A.

    2014-01-01

    Recent studies suggest that nitrogen additions to increase the total nitrogen:total phosphorus (TN:TP) ratio may reduce cyanobacterial biovolume and microcystin concentration in reservoirs. In systems where TP is >100 μg/L, however, nitrogen additions to increase the TN:TP ratio could cause ammonia, nitrate, or nitrite toxicity to terrestrial and aquatic organisms. Reducing phosphorus via aluminum sulfate (alum) may be needed prior to nitrogen additions aimed at increasing the TN:TP ratio. We experimentally tested this sequential management approach in large in situ mesocosms (70.7 m3) to examine effects on cyanobacteria and microcystin concentration. Because alum removes nutrients and most seston from the water column, alum treatment reduced both TN and TP, leaving post-treatment TN:TP ratios similar to pre-treatment ratios. Cyanobacterial biovolume was reduced after alum addition, but the percent composition (i.e., relative) cyanobacterial abundance remained unchanged. A single ammonium nitrate (nitrogen) addition increased the TN:TP ratio 7-fold. After the TN:TP ratio was >50 (by weight), cyanobacterial biovolume and abundance were reduced, and chrysophyte and cryptophyte biovolume and abundance increased compared to the alum treatment. Microcystin was not detectable until the TN:TP ratio was <50. Although both treatments reduced cyanobacteria, only the nitrogen treatment seemed to stimulate energy flow from primary producers to zooplankton, which suggests that combining alum and nitrogen treatments may be a viable in-lake management strategy to reduce cyanobacteria and possibly microcystin concentrations in high-phosphorus systems. Additional studies are needed to define best management practices before combined alum and nitrogen additions are implemented as a reservoir management strategy.

  20. Heat Transfer Enhancement for Finned-Tube Heat Exchangers with Vortex Generators: Experimental and Numerical Results

    SciTech Connect

    O'Brien, James Edward; Sohal, Manohar Singh; Huff, George Albert

    2002-08-01

    A combined experimental and numerical investigation is under way to investigate heat transfer enhancement techniques that may be applicable to large-scale air-cooled condensers such as those used in geothermal power applications. The research is focused on whether air-side heat transfer can be improved through the use of finsurface vortex generators (winglets,) while maintaining low heat exchanger pressure drop. A transient heat transfer visualization and measurement technique has been employed in order to obtain detailed distributions of local heat transfer coefficients on model fin surfaces. Pressure drop measurements have also been acquired in a separate multiple-tube row apparatus. In addition, numerical modeling techniques have been developed to allow prediction of local and average heat transfer for these low-Reynolds-number flows with and without winglets. Representative experimental and numerical results presented in this paper reveal quantitative details of local fin-surface heat transfer in the vicinity of a circular tube with a single delta winglet pair downstream of the cylinder. The winglets were triangular (delta) with a 1:2 height/length aspect ratio and a height equal to 90% of the channel height. Overall mean fin-surface Nusselt-number results indicate a significant level of heat transfer enhancement (average enhancement ratio 35%) associated with the deployment of the winglets with oval tubes. Pressure drop measurements have also been obtained for a variety of tube and winglet configurations using a single-channel flow apparatus that includes four tube rows in a staggered array. Comparisons of heat transfer and pressure drop results for the elliptical tube versus a circular tube with and without winglets are provided. Heat transfer and pressure-drop results have been obtained for flow Reynolds numbers based on channel height and mean flow velocity ranging from 700 to 6500.

  1. Flue gas conditioning for improved particle collection in electrostatic precipitators. First topical report, Results of laboratory screening of additives

    SciTech Connect

    Durham, M.D.

    1993-04-16

    Several tasks have been completed in a program to evaluate additives to improve fine particle collection in electrostatic precipitators. Screening tests and laboratory evaluations of additives are summarized in this report. Over 20 additives were evaluated; four were found to improve flyash precipitation rates. The Insitec particle analyzer was also evaluated; test results show that the analyzer will provide accurate sizing and counting information for particles in the size range of {le} 10 {mu}m dia.

  2. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... materials for animal feed and pet food. 570.14 Section 570.14 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  3. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... materials for animal feed and pet food. 570.14 Section 570.14 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  4. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... materials for animal feed and pet food. 570.14 Section 570.14 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  5. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... materials for animal feed and pet food. 570.14 Section 570.14 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  6. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... materials for animal feed and pet food. 570.14 Section 570.14 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  7. Shuttle Damage/Repair from the Perspective of Hypersonic Boundary Layer Transition - Experimental Results

    NASA Technical Reports Server (NTRS)

    Horvath, Thomas J.; Berry, Scott A.; Merski, N. Ronald; Berger, Karen T.; Buck, Gregory M.; Liechty, Derek S.; Schneider, Steven P.

    2006-01-01

    An overview is provided of the experimental wind tunnel program conducted at the NASA Langley Research Center Aerothermodynamics Laboratory in support of an agency-wide effort to prepare the Shuttle Orbiter for Return-to-Flight. The effect of an isolated protuberance and an isolated rectangular cavity on hypersonic boundary layer transition onset on the windward surface of the Shuttle Orbiter has been experimentally characterized. These experimental studies were initiated to provide a protuberance and cavity effects database for developing hypersonic transition criteria to support on-orbit disposition of thermal protection system damage or repair. In addition, a synergistic experimental investigation was undertaken to assess the impact of an isolated mass-flow entrainment source (simulating pyrolysis/outgassing from a proposed tile repair material) on boundary layer transition. A brief review of the relevant literature regarding hypersonic boundary layer transition induced from cavities and localized mass addition from ablation is presented. Boundary layer transition results were obtained using 0.0075-scale Orbiter models with simulated tile damage (rectangular cavities) of varying length, width, and depth and simulated tile damage or repair (protuberances) of varying height. Cavity and mass addition effects were assessed at a fixed location (x/L = 0.3) along the model centerline in a region of near zero pressure gradient. Cavity length-to-depth ratio was systematically varied from 2.5 to 17.7 and length-to-width ratio of 1 to 8.5. Cavity depth-to-local boundary layer thickness ranged from 0.5 to 4.8. Protuberances were located at several sites along the centerline and port/starboard attachment lines along the chine and wing leading edge. Protuberance height-to-boundary layer thickness was varied from approximately 0.2 to 1.1. Global heat transfer images and heating distributions of the Orbiter windward surface using phosphor thermography were used to infer the

  8. Experimental Results for Temporally Overlapping Pulses from Quantel EverGreen 200 Laser

    NASA Technical Reports Server (NTRS)

    Watkins, A. Neal

    2013-01-01

    This report will detail the experimental results and observations obtained while investigating the feasibility of temporally overlapping the two laser pulses from a Quantel EverGreen 200 Laser. This laser was specifically designed for Particle Imaging Velocimetry (PIV) applications and operate by emitting two 532 nm laser pulses that are seperated by an adjustable finite time (typically on the order of ten to hundreds of microseconds). However, the use of this model laser has found recent application for Pressure Sensitive Paint (PSP) testing, especially for rotorcraft research. For this testing, it is desired to only use one laser pulse. While this is easily done by only firing one of the laser heads, more excitation energy could conceivably be had if both laser heads are fired with zero pulse separation. In addition, recently large field-of-view PIV measurements have become possible and need ever increasing laser power to illuminate the larger areas. For this work, two different methods of timing the laser are investigated using both a traditional power meter to monitor laser power as well as a fast photodiode to determine pulse separation. The results are presented here as well as some simple implications for PIV experiments using these methods.

  9. Dissemination Strategies to Improve Implementation of the PHS Smoking Cessation Guideline in MCH Public Health Clinics: Experimental Evaluation Results and Contextual Factors

    ERIC Educational Resources Information Center

    Manfredi, Clara; Cho, Young Ik; Warnecke, Richard; Saunders, Stephen; Sullivan, Myrtis

    2011-01-01

    We report results from an experimental study that tested the effectiveness of dissemination interventions to improve implementation of smoking cessation guidelines in maternal and child public health clinics. We additionally examine individual clinic results for contextual explanations not apparent from the experimental findings alone. Twelve…

  10. Results from experimental investigations of the performance of air condensers for steam turbine units

    NASA Astrophysics Data System (ADS)

    Fedorov, V. A.; Mil'man, O. O.; Kolesnikov, N. V.; Anan'ev, P. A.; Dunaev, S. N.; Mikhal'kov, A. M.; Mosin, A. V.; Kondrat'ev, A. V.

    2013-02-01

    Results from experimental investigations of the model versions of Type ABC GI air condensers are presented, and it is shown that these condensers have better performance characteristics as compared with their analogs that are currently in operation.

  11. Beryllium metal I. experimental results on acute oral toxicity, local skin and eye effects, and genotoxicity.

    PubMed

    Strupp, Christian

    2011-01-01

    The toxicity of soluble metal compounds is often different from that of the parent metal. Since no reliable data on acute toxicity, local effects, and mutagenicity of beryllium metal have ever been generated, beryllium metal powder was tested according to the respective Organisation for Economical Co-Operation and Development (OECD) guidelines. Acute oral toxicity of beryllium metal was investigated in rats and local effects on skin and eye in rabbits. Skin-sensitizing properties were investigated in guinea pigs (maximization method). Basic knowledge about systemic bioavailability is important for the design of genotoxicity tests on poorly soluble substances. Therefore, it was necessary to experimentally compare the capacities of beryllium chloride and beryllium metal to form ions under simulated human lung conditions. Solubility of beryllium metal in artificial lung fluid was low, while solubility in artificial lysosomal fluid was moderate. Beryllium chloride dissolution kinetics were largely different, and thus, metal extracts were used in the in vitro genotoxicity tests. Genotoxicity was investigated in vitro in a bacterial reverse mutagenicity assay, a mammalian cell gene mutation assay, a mammalian cell chromosome aberration assay, and an unscheduled DNA synthesis (UDS) assay. In addition, cell transformation was tested in a Syrian hamster embryo cell assay, and potential inhibition of DNA repair was tested by modification of the UDS assay. Beryllium metal was found not to be mutagenic or clastogenic based on the experimental in vitro results. Furthermore, treatment with beryllium metal extracts did not induce DNA repair synthesis, indicative of no DNA-damaging potential of beryllium metal. A cell-transforming potential and a tendency to inhibit DNA repair when the cell is severely damaged by an external stimulus were observed. Beryllium metal was also found not to be a skin or eye irritant, not to be a skin sensitizer, and not to have relevant acute oral

  12. Beryllium Metal I. Experimental Results on Acute Oral Toxicity, Local Skin and Eye Effects, and Genotoxicity

    PubMed Central

    Strupp, Christian

    2011-01-01

    The toxicity of soluble metal compounds is often different from that of the parent metal. Since no reliable data on acute toxicity, local effects, and mutagenicity of beryllium metal have ever been generated, beryllium metal powder was tested according to the respective Organisation for Economical Co-Operation and Development (OECD) guidelines. Acute oral toxicity of beryllium metal was investigated in rats and local effects on skin and eye in rabbits. Skin-sensitizing properties were investigated in guinea pigs (maximization method). Basic knowledge about systemic bioavailability is important for the design of genotoxicity tests on poorly soluble substances. Therefore, it was necessary to experimentally compare the capacities of beryllium chloride and beryllium metal to form ions under simulated human lung conditions. Solubility of beryllium metal in artificial lung fluid was low, while solubility in artificial lysosomal fluid was moderate. Beryllium chloride dissolution kinetics were largely different, and thus, metal extracts were used in the in vitro genotoxicity tests. Genotoxicity was investigated in vitro in a bacterial reverse mutagenicity assay, a mammalian cell gene mutation assay, a mammalian cell chromosome aberration assay, and an unscheduled DNA synthesis (UDS) assay. In addition, cell transformation was tested in a Syrian hamster embryo cell assay, and potential inhibition of DNA repair was tested by modification of the UDS assay. Beryllium metal was found not to be mutagenic or clastogenic based on the experimental in vitro results. Furthermore, treatment with beryllium metal extracts did not induce DNA repair synthesis, indicative of no DNA-damaging potential of beryllium metal. A cell-transforming potential and a tendency to inhibit DNA repair when the cell is severely damaged by an external stimulus were observed. Beryllium metal was also found not to be a skin or eye irritant, not to be a skin sensitizer, and not to have relevant acute oral

  13. Experimental evaluation of water mist with metal chloride additives for suppressing CH4/air cup-burner flames

    NASA Astrophysics Data System (ADS)

    Liu, Jianghong; Cong, Beihua

    2013-06-01

    In order to investigate the fire suppression effectiveness of water mist with metal chloride additives, ultrafine water mists of these salts with diameters about 10μm were introduced into CH4/air non-premixed flame in the cup burner. Results showed that these droplets hard to make itself to the flame front under the cup burner flow conditions functioned as a carrier of the vaporized solid particles or its decomposed materials. The metal chloride improved fire suppression efficacy of water mist which were affected by the type and concentration of metal chloride. On a mass basis, there is a fire suppression effectiveness relationship of MgCl2additive limits exist due to the associated limiting vapour pressure of the additive.

  14. Wageningen Urban Rainfall Experiment 2014 (WURex14): Experimental Setup and First Results

    NASA Astrophysics Data System (ADS)

    van Leth, Thomas; Uijlenhoet, Remko; Overeem, Aart; Leijnse, Hidde; Hazenberg, Pieter

    2015-04-01

    Microwave links from cellular communication networks have been shown to be able to provide valuable information concerning the space-time variability of rainfall. In particular over urban areas, where network densities are generally high, they have the potential to complement existing dedicated infrastructure to measure rainfall (gauges, radars). In addition, microwave links provide a great opportunity for ground-based rainfall measurement for those land surface areas of the world where gauges and radars are generally lacking, e.g. Africa, Latin America, and large parts of Asia. Such information is not only crucial for water management and agriculture, but also for instance for ground validation of space-borne rainfall estimates such as those provided by the recently launched core satellite of the GPM (Global Precipitation Measurement) mission. WURex14 is dedicated to address several errors and uncertainties associated with such quantitative precipitation estimates in detail. The core of the experiment is provided by two co-located microwave links installed between two major buildings on the Wageningen University campus, approximately 2 km apart: a 38 GHz commercial microwave link, kindly provided to us by T-Mobile NL, and a 38 GHz dual-polarization research microwave link from RAL. Transmitting and receiving antennas have been attached to masts installed on the roofs of the two buildings, about 30 m above the ground. This setup has been complemented with a Scintec infrared Large-Aperture Scintillometer, installed over the same path, as well as a Parsivel optical disdrometer, located close to the mast on the receiving end of the links. During the course of the experiment, a 26 GHz RAL research microwave link was added to the experimental setup. Temporal sampling of the received signals was performed at a rate of 20 Hz. In addition, two time-lapse cameras have been installed on either side of the path to monitor the wetness of the antennas as well as the state of

  15. Wageningen Urban Rainfall Experiment 2014 (WURex14): Experimental Setup and First Results

    NASA Astrophysics Data System (ADS)

    Uijlenhoet, R.; Overeem, A.; Leijnse, H.; Hazenberg, P.

    2014-12-01

    Microwave links from cellular communication networks have been shown to be able to provide valuable information concerning the space-time variability of rainfall. In particular over urban areas, where network densities are generally high, they have the potential to complement existing dedicated infrastructure to measure rainfall (gauges, radars). In addition, microwave links provide a great opportunity for ground-based rainfall measurement for those land surface areas of the world where gauges and radars are generally lacking, e.g. Africa, Latin America, and large parts of Asia. Such information is not only crucial for water management and agriculture, but also for instance for ground validation of space-borne rainfall estimates such as those provided by the recently launched core satellite of the GPM (Global Precipitation Measurement) mission. WURex14 is dedicated to address several errors and uncertainties associated with such quantitative precipitation estimates in detail. The core of the experiment is provided by two co-located microwave links installed between two major buildings on the Wageningen University campus, approximately 2 km apart: a 38 GHz commercial microwave link, kindly provided to us by T-Mobile NL, and a 38 GHz dual-polarization research microwave link from RAL. Transmitting and receiving antennas have been attached to masts installed on the roofs of the two buildings, about 30 m above the ground. This setup has been complemented with a Scintec infrared Large-Aperture Scintillometer, installed over the same path, as well as a Parsivel optical disdrometer, located close to the mast on the receiving end of the links. During the course of the experiment, a 26 GHz RAL research microwave link was added to the experimental setup. Temporal sampling of the received signals was performed at a rate of 20 Hz. In addition, two time-lapse cameras have been installed on either side of the path to monitor the wetness of the antennas as well as the state of

  16. Marine pollution network euromar-mermaid: Results of the experimental operation

    NASA Astrophysics Data System (ADS)

    Knauth, H.-D.; Schroeder, F.; Menzel, R.; Gebhart, E.; Marx, S.; Kohnke, D.; Holzkamm, F.; Nies, H.; Theobald, N.

    1997-09-01

    The need for automated systems to monitor chemical and biochemical variables led to the definition of the EUREKA-EUROMAR project MERMAID. It was realized by several international scientific and industrial partners. Important components were automatic nutrient analyzers and remote-controlled samplers for toxic trace substances in addition to a high-performance data management system with bi-directional telemetry units for remote-controlled network operation. These modules were implemented in the MERMAID network consisting of three sea stations, two of them set up in the Elbe estuary, and one in the Elbe-influenced coastal zone. The latter was at the same time part of the BSH-network. The data were transmitted to shore and processed at GKSS and BSH. While in the preceding project phase the marine pollution network was established and tested, the last MERMAID phase covered its experimental operation. For this purpose, different modules were installed at the three stations. They incorporated meteorological, oceanographic, physical and chemical sensors in addition to automatic analyzers for phosphate, nitrite/nitrate and ammonium as well as specialized samplers for heavy metals and organic micropollutants. Variables were determined directly either continuously by in situ sensors or at variable time intervals by remote-controlled in situ analyzers, or they were determined indirectly by samplers allowing phase-separated multiple sampling with remote or event control of the sampling frequency. In this contribution, the results of nutrient and heavy metal concentration time series measured in 1995 and 1996 are presented together with corresponding meteorological and oceanographic variables. The examples indicate that the transfer of nutrients and contaminants in the estuary and in the coastal zone is strongly influenced by different short- and long-term events, i.e. freshwater discharge rates and wind action. Additionally, in summer, chemical and biological processes

  17. Joint computational/experimental aerodynamics research on a reentry vehicle: Part 2, Computational results

    SciTech Connect

    Walker, M.M.; Oberkampf, W.L.

    1990-01-01

    Computational aerodynamics simulation applied to supersonic and hypersonic flight vehicles has significantly increased during the last several years. Flow field simulations have been computed for a wide variety of vehicles from ballistic reentry vehicles to the Space Shuttle. Although computational aerodynamics simulation has been taking more responsibility during this time, wind tunnel experimentation has continued to play the major role in flight vehicle analysis and design. This role, however, is changing because of the great strides in the capability and confidence in numerical simulations. In this paper computational results are obtained for a spherically blunted cone with a slice parallel to the cone axis. Aerodynamic force and moment predictions from Sandia's CFD codes are compared with wind tunnel data from the Sandia Mach 8 hypersonic wind tunnel. These comparisons are made on a sliced reentry vehicle both with and without a windward flap. The windward flap will be deflected 10{degree}, 20{degree}, and 30{degree}. Inviscid/boundary layer codes and the Parabolized Navier-Stokes code are used to generate solutions for the sliced vehicle. In the region of the flap, some reversed flow is apparent and a full Navier-Stokes code will be used to provide comparisons with the data. Force and moment and surface flow visualization comparisons are made for laminar, ideal gas flow. This will be the first of a series of papers providing comparisons with the Sandia wind tunnel data. Additional papers will report comparisons with surface pressure measurements. 21 refs., 9 figs., 1 tab.

  18. Experimental Results From Stitched Composite Multi-Bay Fuselage Panels Tested Under Uni-Axial Compression

    NASA Technical Reports Server (NTRS)

    Baker, Donald J.

    2004-01-01

    The experimental results from two stitched VARTM composite panels tested under uni-axial compression loading are presented. The curved panels are divided by frames and stringers into five or six bays with a column of three bays along the compressive loading direction. The frames are supported at the ends to resist out-of-plane translation. Back-to-back strain gages are used to record the strain and displacement transducers were used to record the out-of-plane displacements. In addition a full-field measurement technique that utilizes a camera-based-stero-vision system was used to record displacements. The panels were loaded in increments to determine the first bay to buckle. Loading was discontinued at limit load and the panels were removed from the test machine for impact testing. After impacting at 20 ft-lbs to 25 ft-lbs of energy with a spherical indenter, the panels were loaded in compression until failure. Impact testing reduced the axial stiffness 4 percent and less than 1 percent. Postbuckled axial panel stiffness was 52 percent and 70 percent of the pre-buckled stiffness.

  19. A 2D optomechanical focused laser spot scanner: analysis and experimental results for microstereolithography

    NASA Astrophysics Data System (ADS)

    Gandhi, P. S.; Deshmukh, S.

    2010-01-01

    This paper proposes and analyzes a 2D optomechanical-focused laser spot scanning system (patent pending) which allows uniform intensity focused spot scanning with high speed and high resolution over a large range of scan. Such scanning is useful where variation of focused spot characteristics affects the performance of applications such as micro-/nano-stereolithography, laser micro-machining, scanning optical tweezers, optical scanning microscopy, and so on. Proposed scanning is achieved by using linear movement of mirrors and lens maintaining the alignment of motion and optical axis of laser. Higher speed and high resolution at the same time are achieved by use of two serial double parallelogram flexural mechanisms with mechatronics developed around them. Optical analysis is carried out to demonstrate effectiveness of the proposed system numerically and is further supported by the experimental results. Additional analysis is carried out to demonstrate robustness of the scanner in the case of small misalignment errors incurred in actual practice. Although the proposed scanner is useful in general in several applications mentioned above, discussion in this paper is focused on microstereolithography.

  20. Soil N2O fluxes along an elevation gradient of tropical montane forests under experimental nitrogen and phosphorus addition

    NASA Astrophysics Data System (ADS)

    Müller, Anke; Matson, Amanda; Corre, Marife; Veldkamp, Edzo

    2015-10-01

    Nutrient deposition to tropical forests is increasing, which could affect soil fluxes of nitrous oxide (N2O), a powerful greenhouse gas. We assessed the effects of 35-56 months of moderate nitrogen (N) and phosphorus (P) additions on soil N2O fluxes and net soil N-cycling rates, and quantified the relative contributions of nitrification and denitrification to N2O fluxes. In 2008, a nutrient manipulation experiment was established along an elevation gradient (1000, 2000 and 3000 m) of montane forests in southern Ecuador. Treatments included control, N, P and N+P addition (with additions of 50 kg N ha-1 yr-1 and 10 kg P ha-1 yr-1). Nitrous oxide fluxes were measured using static, vented chambers and N cycling was determined using the buried bag method. Measurements showed that denitrification was the main N2O source at all elevations, but that annual N2O emissions from control plots were low, and decreased along the elevation gradient (0.57 ± 0.26 to 0.05 ± 0.04 kg N2O-N ha-1 yr-1). We attributed the low fluxes to our sites’ conservative soil N cycling as well as gaseous N losses possibly being dominated by N2. Contrary to the first 21 months of the experiment, N addition did not affect N2O fluxes during the 35-56 month period, possibly due to low soil moisture contents during this time. With P addition, N2O fluxes and mineral N concentrations decreased during Months 35-56, presumably because plant P limitations were alleviated, increasing plant N uptake. Nitrogen plus phosphorus addition showed similar trends to N addition, but less pronounced given the counteracting effects of P addition. The combined results from this study (Months 1-21 and 35-56) showed that effects of N and P addition on soil N2O fluxes were not linear with time of exposure, highlighting the importance of long-term studies.

  1. Experimental and computational results from a large low-speed centrifugal impeller

    NASA Technical Reports Server (NTRS)

    Hathaway, M. D.; Chriss, R. M.; Wood, J. R.; Strazisar, A. J.

    1993-01-01

    An experimental and computational investigation of the NASA Low-Speed Centrifugal Compressor (LSCC) flow field has been conducted using laser anemometry and Dawes' 3D viscous code. The experimental configuration consists of a backswept impeller followed by a vaneless diffuser. Measurements of the three-dimensional velocity field were acquired at several measurement planes through the compressor. The measurements describe both the throughflow and secondary velocity field along each measurement plane and in several cases provide details of the flow within the blade boundary layers. The experimental and computational results provide a clear understanding of the development of the throughflow momentum wake which is characteristic of centrifugal compressors.

  2. Experimental and computational results from a large low-speed centrifugal impeller

    NASA Technical Reports Server (NTRS)

    Hathaway, M. D.; Chriss, R. M.; Wood, J. R.; Strazisar, A. J.

    1994-01-01

    An experimental and computational investigation of the NASA Low-Speed Centrifugal Compressor (LSCC) flow field was conducted using laser anemometry and Dawes' 3D viscous code. The experimental configuration consists of a back-swept impeller followed by a vaneless diffuser. Measurements of the three-dimensional velocity field were acquired at several measurement planes through the compressor. The measurements describe both the throughflow and secondary velocity field along each measurement plane and, in several cases, provide details of the flow within the blade boundary layers. The experimental and computational results provide a clear understanding of the development of the throughflow momentum wake which is characteristic of centrifugal compressors.

  3. Experimental study of tilting-pad journal bearings - Comparison with theoretical thermoelastohydrodynamic results

    NASA Astrophysics Data System (ADS)

    Fillon, Michel; Bligoud, Jean-Claude; Frene, Jean

    1992-07-01

    Operating characteristics of four-shoe tilting-pad journal bearings of 100 mm diameter and 70 mm length are determined on an experimental device. The load, between pad configuration, varies from 0 to 10,000 N and the rotational speed is up to 4000 rpm. Forty thermocouples are used in order to measure bearing element temperatures (babbitt, shaft, housing and oil baths). The influence of operating conditions and preload ratio on bearing performances are studied. Comparison between theoretical and experimental results is presented. The theoretical model is also performed on a large tilting-pad journal bearing which was investigated experimentally by other authors.

  4. Optical scattering by biological aerosols: experimental and computational results on spore simulants

    NASA Astrophysics Data System (ADS)

    Sindoni, Orazio I.; Saija, Rosalba; Iatì, Maria Antonia; Borghese, Ferdinando; Denti, Paolo; Fernandes, Gustavo E.; Pan, Yong-Le; Chang, Richard K.

    2006-07-01

    We present both a computational and an experimental approach to the problem of biological aerosol characterization, joining the expertises reached in the field of theoretical optical scattering by complex, arbitrary shaped particles (multipole expansion of the electromagnetic fields and Transition Matrix), and a novel experimental technique based on two-dimensional angular optical scattering (TAOS). The good agreement between experimental and computational results, together with the possibility for a laboratory single-particle angle-resolved investigation, opens a new scenario in biological particle modelling, and might have major implications for a rapid discrimination of airborne particles.

  5. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Task 3 Full-scale Test Results

    SciTech Connect

    Gary Blythe

    2007-05-01

    in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High-sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Plant Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. The pilot-scale tests were completed in 2005 and have been previously reported. This topical report presents the results from the Task 3 full-scale additive tests, conducted at IPL's Petersburg Station Unit 2. The Task 5 full-scale additive tests will be conducted later in calendar year 2007.

  6. Experimental results on p (d) + A collisions at RHIC and the LHC

    NASA Astrophysics Data System (ADS)

    Sickles, Anne M.

    2014-11-01

    Recent experimental results at both the LHC and RHIC show evidence for hydrodynamic behavior in proton-nucleus and deuteron-nucleus collisions (p + A). This unexpected finding has prompted new measurements in p + A collisions in order to understand whether matter with similar properties is created in A + A and p + A collisions or whether another explanation is needed. In this proceedings, we will discuss the new experimental data and its interpretation within the context of heavy-ion collisions.

  7. Performance analysis of wick-assisted heat pipe solar collector and comparison with experimental results

    NASA Astrophysics Data System (ADS)

    Azad, E.

    2009-03-01

    The performance of heat pipe solar collector is investigated theoretically and experimentally. The system employs wick-assisted heat pipe for the heat transfer from the absorber (evaporator) to a heat exchanger (condenser). The heat pipe is made with a copper tube and the evaporator section is finned with aluminium plate. Theoretical model predicts the outlet water from heat exchanger, heat pipe temperature and also the thermal efficiency of solar collector. The results are compared with experimental data.

  8. Differential responses of short-term soil respiration dynamics to the experimental addition of nitrogen and water in the temperate semi-arid steppe of Inner Mongolia, China.

    PubMed

    Qi, Yuchun; Liu, Xinchao; Dong, Yunshe; Peng, Qin; He, Yating; Sun, Liangjie; Jia, Junqiang; Cao, Congcong

    2014-04-01

    We examined the effects of simulated rainfall and increasing N supply of different levels on CO2 pulse emission from typical Inner Mongolian steppe soil using the static opaque chamber technique, respectively in a dry June and a rainy August. The treatments included NH4NO3 additions at rates of 0, 5, 10, and 20 g N/(m(2)·year) with or without water. Immediately after the experimental simulated rainfall events, the CO2 effluxes in the watering plots without N addition (WCK) increased greatly and reached the maximum value at 2 hr. However, the efflux level reverted to the background level within 48 hr. The cumulative CO2 effluxes in the soil rang ed from 5.60 to 6.49 g C/m(2) over 48 hr after a single water application, thus showing an increase of approximately 148.64% and 48.36% in the effluxes during both observation periods. By contrast, the addition of different N levels without water addition did not result in a significant change in soil respiration in the short term. Two-way ANOVA showed that the effects of the interaction between water and N addition were insignificant in short-term soil CO2 effluxes in the soil. The cumulative soil CO2 fluxes of different treatments over 48 hr accounted for approximately 5.34% to 6.91% and 2.36% to 2.93% of annual C emission in both experimental periods. These results stress the need for improving the sampling frequency after rainfall in future studies to ensure more accurate evaluation of the grassland C emission contribution. PMID:25079414

  9. 49 CFR 1155.23 - Additional requirements when filing after an unsatisfactory result from a State, local, or...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Additional requirements when filing after an unsatisfactory result from a State, local, or municipal authority affecting the siting of the facility. 1155.23 Section 1155.23 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT...

  10. Numerical simulation and experimental results of ultrasonic waves scattering on a model of the artery

    NASA Astrophysics Data System (ADS)

    Wojcik, J.; Powalowski, T.; Trawinski, Z.

    2008-02-01

    The aim of this paper is to compare the results of the mathematical modeling and experimental results of the ultrasonic waves scattering in the inhomogeneous dissipative medium. The research was carried out for an artery model (a pipe made of a latex), with internal diameter of 5 mm and wall thickness of 1.25 mm. The numerical solver was created for calculation of the fields of ultrasonic beams and scattered fields under different boundary conditions, different angles and transversal displacement of ultrasonic beams with respect to the position of the arterial wall. The investigations employed the VED ultrasonic apparatus. The good agreement between the numerical calculation and experimental results was obtained.

  11. Experimental results of a load management system for large commercial customers

    SciTech Connect

    Johnson, W.A.; Devaney, T.M.; Maher, A.M.

    1985-09-01

    Encouraging experimental results have been obtained from a two-way load management system for large commercial as well as governmental customers on the Potomac Electric Power Company (PEPCo) system. This paper presents these results and describes the inovative twoway load management system that was developed and installed to achieve them. The Robinton Products, Inc. system operates from a central processor located in PEPCO's control center and it communicates with the customer locations through a telephone system called ''Select-A-Station''. Future plans for the expansion of the system are presented along with experimental results.

  12. Experimental Results with Airfoils Tested in the High-speed Tunnel at Guidonia

    NASA Technical Reports Server (NTRS)

    Ferri, Antonio

    1940-01-01

    The results are presented of a triple series of tests using force measurements, pressure-distribution measurements, and air flow photographs on airfoil sections suitably selected so that comparison could be made between the experimental and theoretical results. The comparison with existing theory is followed by a discussion of the divergences found, and an attempt is made to find their explanation.

  13. Three-dimensional convection in horizontal cylinders - Numerical solutions and comparison with experimental and analytical results

    NASA Technical Reports Server (NTRS)

    Smutek, C.; Bontoux, P.; Roux, B.; Schiroky, G. H.; Hurford, A. C.

    1985-01-01

    The results of a three-dimensional numerical simulation of Boussinesq free convection in a horizontal differentially heated cylinder are presented. The computation was based on a Samarskii-Andreyev scheme (described by Leong, 1981) and a false-transient advancement in time, with vorticity, velocity, and temperature as dependent variables. Solutions for velocity and temperature distributions were obtained for Rayleigh numbers (based on the radius) Ra = 74-18,700, thus covering the core- and boundary-layer-driven regimes. Numerical solutions are compared with asymptotic analytical solutions and experimental data. The numerical results well represent the complex three-dimensional flows found experimentally.

  14. Preliminary Experimental Results on Controlled Cardiac Computed Tomography: A Phantom Study

    PubMed Central

    Lu, Yang; Cai, Zhijun; Wang, Ge; Zhao, Jun; Bai, Er-Wei

    2010-01-01

    In this paper, we present the preliminary experimental results on controlled cardiac computed tomography (CT), which aims to reduce the motion artifacts by means of controlling the x-ray source rotation speed. An innovative cardiac phantom enables us to perform this experiment without modifying the scanner. It is the first experiment on the cardiac CT with speed controlled x-ray source. Experimental results demonstrate that the proposed method successfully separates the phantom images at different phases (improve the temporal resolution) though controlling the x-ray speed. PMID:19696470

  15. Parametric Evaluation of Absorption Losses and Comparison of Numerical Results to Boeing 707 Aircraft Experimental HIRF Results

    NASA Astrophysics Data System (ADS)

    Kitaygorsky, J.; Amburgey, C.; Elliott, J. R.; Fisher, R.; Perala, R. A.

    A broadband (100 MHz-1.2 GHz) plane wave electric field source was used to evaluate electric field penetration inside a simplified Boeing 707 aircraft model with a finite-difference time-domain (FDTD) method using EMA3D. The role of absorption losses inside the simplified aircraft was investigated. It was found that, in this frequency range, none of the cavities inside the Boeing 707 model are truly reverberant when frequency stirring is applied, and a purely statistical electromagnetics approach cannot be used to predict or analyze the field penetration or shielding effectiveness (SE). Thus it was our goal to attempt to understand the nature of losses in such a quasi-statistical environment by adding various numbers of absorbing objects inside the simplified aircraft and evaluating the SE, decay-time constant τ, and quality factor Q. We then compare our numerical results with experimental results obtained by D. Mark Johnson et al. on a decommissioned Boeing 707 aircraft.

  16. Comparison of energy deposition calculations by the LAHET Code System with experimental results

    SciTech Connect

    Beard, C.A.; Lisowski, P.W.; Russell, G.J.; Waters, L.S.

    1993-08-01

    A comparison was performed between the energy deposition predicted by the LAHET Code System (LCS) with experimental values determined by Belyakov-Bodin et al. for 800, 1000, and 1200 MeV protons on targets composed of lead, bismuth, beryllium, carbon, and aluminum. The lead and bismuth showed agreement within approximately 10% at locations throughout the targets, and the agreement of the total energy deposited over the axial length of the targets ranged from 1% to 25%. For the lead and bismuth cases, the LCS predictions were always greater than the experimental results. For the lighter materials, the agreement at locations throughout the target only agreed within approximately 20%. No definable trend could be determined for the lighter materials since some LCS predictions were greater than the experimental results, some were less than the experimental results, and some showed very good agreement. The total energy deposited over the axial length of the targets was not compared for the lighter materials since it was not explicitly given with the experimental data.

  17. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Task 5 Full-Scale Test Results

    SciTech Connect

    Gary Blythe; MariJon Owens

    2007-12-01

    and reporting. The other four tasks involve field testing on FGD systems, either at pilot or full scale. The four tasks include: Task 2 - Pilot Additive Testing in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High-sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Plant Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. The pilot-scale tests and the full-scale test using high-sulfur coal were completed in 2005 and 2006 and have been previously reported. This topical report presents the results from the Task 5 full-scale additive tests, conducted at Southern Company's Plant Yates Unit 1. Both additives were tested there.

  18. Photon Detection with Cooled Avalanche Photodiodes: Theory and Preliminary Experimental Results

    NASA Technical Reports Server (NTRS)

    Robinson, D. L.; Hays, D. A.

    1985-01-01

    Avalanche photodiodes (APDs) can be operated in a geiger-tube mode so that they can respond to single electron events and thus be used as photon counting detectors. Operational characteristics and theory of APDs while used in this mode are analyzed and assessed. Preliminary experimental investigation of several commercially available APDs has commenced, and initial results for dark count statistics are presented.

  19. Solving System Of Linear Equations Using The Bimodal Optical Computer (Experimental Results)

    NASA Astrophysics Data System (ADS)

    Habli, M. A.; Abushagur, M. A. G.; Caulfield, H. J.

    1988-08-01

    Hardware and software design of the Bimodal Optical Computer (BOC) and its implementations are presented. Experimental results of the BOC for solving a system of linear equations Ax = b is reported. The effect of calibration, the convergence reliability of the BOC, and the convergence of problems with singular matrices are studied.

  20. An outcome-based learning model to identify emerging threats : experimental and simulation results.

    SciTech Connect

    Martinez-Moyano, I. J.; Conrad, S. H.; Andersen, D. F.; Decision and Information Sciences; SNL; Univ. at Albany

    2007-01-01

    The authors present experimental and simulation results of an outcome-based learning model as it applies to the identification of emerging threats. This model integrates judgment, decision making, and learning theories to provide an integrated framework for the behavioral study of emerging threats.

  1. At Odds: Reconciling Experimental and Theoretical Results in High School Physics

    ERIC Educational Resources Information Center

    Gates, Joshua

    2009-01-01

    For this experiment, students are divided into 2 groups and presented with a static equilibrium force-balance problem to solve. One group works entirely experimentally and the other group theoretically, using Newton's laws. The groups present their seemingly dissimilar results and must reconcile them through discussion. (Contains 3 figures.)

  2. Evaluating Impacts of CO2 Gas Intrusion Into a Confined Sandstone aquifer: Experimental Results

    DOE PAGESBeta

    Qafoku, Nikolla; Lawter, Amanda R.; Shao, Hongbo; Wang, Guohui; Brown, Christopher F.

    2014-12-31

    Deep subsurface storage and sequestration of CO2 has been identified as a potential mitigation technique for rising atmospheric CO2 concentrations. Sequestered CO2 represents a potential risk to overlying aquifers if the CO2 leaks from the deep storage reservoir. Experimental and modeling work is required to evaluate potential risks to groundwater quality and develop a systematic understanding of how CO2 leakage may cause important changes in aquifer chemistry and mineralogy by promoting dissolution/precipitation, adsorption/desorption, and redox reactions. Sediments from the High Plains aquifer in Kansas, United States, were used in this investigation, which is part of the National Risk Assessment Partnershipmore » Program sponsored by the US Department of Energy. This aquifer was selected to be representative of consolidated sand and gravel/sandstone aquifers overlying potential CO2 sequestration repositories within the continental US. In this paper, we present results from batch experiments conducted at room temperature and atmospheric pressure with four High Plains aquifer sediments. Batch experiments simulate sudden, fast, and short-lived releases of the CO2 gas as would occur in the case of well failure during injection. Time-dependent release of major, minor, and trace elements were determined by analyzing the contacting solutions. Characterization studies demonstrated that the High Plains aquifer sediments were abundant in quartz and feldspars, and contained about 15 to 20 wt% montmorillonite and up to 5 wt% micas. Some of the High Plains aquifer sediments contained no calcite, while others had up to about 7 wt% calcite. The strong acid extraction tests confirmed that in addition to the usual elements present in most soils, rocks, and sediments, the High Plains aquifer sediments had appreciable amounts of As, Cd, Pb, Cu, and occasionally Zn, which potentially may be mobilized from the solid to the aqueous phase during or after exposure to CO2. However

  3. Effect of Hydrodynamics on Particle Transport in Saturated Fractures: Experimental and Simulation Results

    NASA Astrophysics Data System (ADS)

    Cianflone, S.; Lakhian, V.; Dickson, S. E.

    2014-12-01

    Approximately one third of Canadians and Americans use groundwater as their source of drinking water. Porous media aquifers typically provide significant filtration of particulate contaminants (e.g., viruses, bacteria, protozoa). Fractured media, however, does not provide the same degree of filtration, and in fact often acts as a pathway for particulates to migrate, typically at much greater velocities than in porous media. Fractured aquifers, therefore, are significantly more vulnerable to particulate contamination than unconsolidated porous media. Thus, understanding in the mechanisms of particle migration and retention in fractures is important for the protection and management of these drinking water sources. The purpose of this work was to investigate the role of hydrodynamics on particle transport in saturated, variable aperture fractures. A 2D fracture was randomly generated with an average aperture of approximately 2mm. The fracture was inscribed into pieces of poly(methyl methacrylate), thus creating a pseudo-2D fracture (the xy fracture domain is invariant in z). Transport experiments using fluorescent microspheres (0.05 um, 0.5 um, and 0.75 um) were performed at 2.6 m/day, 26 m/day and 113 m/day and the resulting breakthrough curves were measured. These breakthrough curves included various shoulders and artifacts that were repeatable and could be used to evaluate the quality of a model. COMSOL Multiphysics, was used to generate an average flow field through the 2D fracture by numerically solving the steady-state Navier-Stokes equation. In order to have a 3D realization of the flow field, a parabolic flow regime was assumed in the z-axis and used to scale the average flow field. Random walk particle tracking was utilized to generate breakthrough curves; however, the Brownian motion and local fluid shear mechanisms needed to be considered in addition to the standard movement of particles via the local flow field in order to appropriately model the

  4. Evaluating Impacts of CO2 Gas Intrusion Into a Confined Sandstone aquifer: Experimental Results

    SciTech Connect

    Qafoku, Nikolla; Lawter, Amanda R.; Shao, Hongbo; Wang, Guohui; Brown, Christopher F.

    2014-12-31

    Deep subsurface storage and sequestration of CO2 has been identified as a potential mitigation technique for rising atmospheric CO2 concentrations. Sequestered CO2 represents a potential risk to overlying aquifers if the CO2 leaks from the deep storage reservoir. Experimental and modeling work is required to evaluate potential risks to groundwater quality and develop a systematic understanding of how CO2 leakage may cause important changes in aquifer chemistry and mineralogy by promoting dissolution/precipitation, adsorption/desorption, and redox reactions. Sediments from the High Plains aquifer in Kansas, United States, were used in this investigation, which is part of the National Risk Assessment Partnership Program sponsored by the US Department of Energy. This aquifer was selected to be representative of consolidated sand and gravel/sandstone aquifers overlying potential CO2 sequestration repositories within the continental US. In this paper, we present results from batch experiments conducted at room temperature and atmospheric pressure with four High Plains aquifer sediments. Batch experiments simulate sudden, fast, and short-lived releases of the CO2 gas as would occur in the case of well failure during injection. Time-dependent release of major, minor, and trace elements were determined by analyzing the contacting solutions. Characterization studies demonstrated that the High Plains aquifer sediments were abundant in quartz and feldspars, and contained about 15 to 20 wt% montmorillonite and up to 5 wt% micas. Some of the High Plains aquifer sediments contained no calcite, while others had up to about 7 wt% calcite. The strong acid extraction tests confirmed that in addition to the usual elements present in most soils, rocks, and sediments, the High Plains aquifer sediments had appreciable amounts of As, Cd, Pb, Cu, and occasionally Zn, which potentially may be mobilized from the solid to the aqueous phase during or after exposure to CO2. However, the

  5. Design and Experimental Results for a Natural-Laminar-Flow Airfoil for General Aviation Applications

    NASA Technical Reports Server (NTRS)

    Somers, D. M.

    1981-01-01

    A natural-laminar-flow airfoil for general aviation applications, the NLF(1)-0416, was designed and analyzed theoretically and verified experimentally in the Langley Low-Turbulence Pressure Tunnel. The basic objective of combining the high maximum lift of the NASA low-speed airfoils with the low cruise drag of the NACA 6-series airfoils was achieved. The safety requirement that the maximum lift coefficient not be significantly affected with transition fixed near the leading edge was also met. Comparisons of the theoretical and experimental results show excellent agreement. Comparisons with other airfoils, both laminar flow and turbulent flow, confirm the achievement of the basic objective.

  6. Non-destructive evaluation of metal-to-metal adhesive joints using vibration analysis: experimental results

    NASA Astrophysics Data System (ADS)

    Pandurangan, Pradeep; Buckner, Gregory D.

    2006-03-01

    Vibration based non-destructive evaluation shows promise for damage detection in metal-to-metal adhesive joints. This research investigates an experimental technique to diagnose damage in single-lap adhesive joints subject to cyclical tensile loading. Vibration analysis reveals that damage can be correlated with changes in identified modal damping ratios. Constant amplitude forcing functions are employed to eliminate amplitude-dependent nonlinearities in the dynamic response profiles. Damping estimates obtained from time-domain analyses correlate well with damage magnitudes. Finite element modal analysis of the lap joints supports the experimental results.

  7. Review on optical constants of Titan aerosols: Experimental results and modeling/observational data

    NASA Astrophysics Data System (ADS)

    Brassé, Coralie; Muñoz, Olga; Coll, Patrice; Raulin, François

    2014-05-01

    During the last years many studies have been performed to improve the experimental database of optical constants of Titan aerosols. Indeed, the determination of the optical constants of these particles is essential to quantify their capacity to absorb and to scatter solar radiation, and thus to evaluate their role on Titan's radiative balance and climate. The study of optical properties is also crucial to analyze and to better interpret many of Titan's observational data, in particular those acquired during the Cassini-Huygens mission. One way to determine Titan aerosols optical constant is to measure the optical constants of analogues of Titan complex organic material synthesized in the laboratory, usually named Titan's tholins (Sagan and Khare, 1979). But the optical constants depend on the chemical composition, the size and the shape of particles (Raulin et al., 2012). Those three parameters result from the experimental conditions such as energy source, gas mixing ratio, gas pressure, flow rate and irradiation time (Cable et al., 2012). Besides the determination of the refractive index in the laboratory, there are others methods using theoretical models or observational data. Nevertheless, theoretical models are based on laboratory data or/and observational data. The visible - near infrared spectral region of optical constants has been widely studied with laboratory analogues. Comparison of the obtained results suggest that tholins synthesized by Tran et al. (2003) and Majhoub et al. (2012) are the best representative of Titan aerosols with regards to their refractive indexes in this spectral region. The mid-infrared spectral range has been studied only by Imanaka et al. (2012) and slightly by Tran et al. (2003). In that spectral range, Titan tholins do not exhibit the features displayed by Kim and Courtin (2013) from Titan's observations. For spectral region of wavelengths smaller than 0.20µm or higher than 25µm, only the data from Khare et al. (1984) are

  8. Effects of experimental fuel additions on fire intensity and severity: unexpected carbon resilience of a neotropical forest.

    PubMed

    Brando, Paulo M; Oliveria-Santos, Claudinei; Rocha, Wanderley; Cury, Roberta; Coe, Michael T

    2016-07-01

    Global changes and associated droughts, heat waves, logging activities, and forest fragmentation may intensify fires in Amazonia by altering forest microclimate and fuel dynamics. To isolate the effects of fuel loads on fire behavior and fire-induced changes in forest carbon cycling, we manipulated fine fuel loads in a fire experiment located in southeast Amazonia. We predicted that a 50% increase in fine fuel loads would disproportionally increase fire intensity and severity (i.e., tree mortality and losses in carbon stocks) due to multiplicative effects of fine fuel loads on the rate of fire spread, fuel consumption, and burned area. The experiment followed a fully replicated randomized block design (N = 6) comprised of unburned control plots and burned plots that were treated with and without fine fuel additions. The fuel addition treatment significantly increased burned area (+22%) and consequently canopy openness (+10%), fine fuel combustion (+5%), and mortality of individuals ≥5 cm in diameter at breast height (dbh; +37%). Surprisingly, we observed nonsignificant effects of the fuel addition treatment on fireline intensity, and no significant differences among the three treatments for (i) mortality of large trees (≥30 cm dbh), (ii) aboveground forest carbon stocks, and (iii) soil respiration. It was also surprising that postfire tree growth and wood increment were higher in the burned plots treated with fuels than in the unburned control. These results suggest that (i) fine fuel load accumulation increases the likelihood of larger understory fires and (ii) single, low-intensity fires weakly influence carbon cycling of this primary neotropical forest, although delayed postfire mortality of large trees may lower carbon stocks over the long term. Overall, our findings indicate that increased fine fuel loads alone are unlikely to create threshold conditions for high-intensity, catastrophic fires during nondrought years. PMID:26750627

  9. Experimental results concerning global observables from the CERN SPS heavy ion program

    SciTech Connect

    Young, G.R.

    1990-06-01

    A brief overview is given of experimental results obtained during the initial operation of the heavy-ion program at the CERN SPS during the period 1986--1988. This paper confines itself to a presentation of results on so-called global observables, such as energy flow and multiplicity distributions, and on information extracted from them. Of particular interest among the latter are an estimate of the magnitude and spatial distribution of the energy density attained. 3 refs., 27 figs.

  10. Applying computational methods to interpret experimental results in tribology and enantioselective catalysis

    NASA Astrophysics Data System (ADS)

    Garvey, Michael T.

    Computational methods are rapidly becoming a mainstay in the field of chemistry. Advances in computational methods (both theory and implementation), increasing availability of computational resources and the advancement of parallel computing are some of the major forces driving this trend. It is now possible to perform density functional theory (DFT) calculations with chemical accuracy for model systems that can be interrogated experimentally. This allows computational methods to supplement or complement experimental methods. There are even cases where DFT calculations can give insight into processes and interactions that cannot be interrogated directly by current experimental methods. This work presents several examples of the application of computational methods to the interpretation and analysis of experimentally obtained results. First, triobological systems were investigated primarily with full-potential linearized augmented plane wave (FLAPW) method DFT calculations. Second, small organic molecules adsorbed on Pd(111) were studied using projector-augmented wave (PAW) method DFT calculations and scanning tunneling microscopy (STM) image simulations to investigate molecular interactions involved in enantioselective heterogeneous catalysis. A method for method for calculating pressure-dependent shear properties of model boundary-layer lubricants is demonstrated. The calculated values are compared with experimentally obtained results. For the case of methyl pyruvate adsorbed on Pd(111), DFT-calculated adsorption energies and structures are used along with STM simulations to identify species observed by STM imaging. A previously unobserved enol species is discovered to be present along with the expected keto species. The information about methyl pyruvate species on Pd(111) is combined with previously published studies of S-alpha-(1-naphthyl)-ethylamine (NEA) to understand the nature of their interaction upon coadsorption on Pd(111). DFT calculated structures and

  11. Automated detection of discourse segment and experimental types from the text of cancer pathway results sections.

    PubMed

    Burns, Gully A P C; Dasigi, Pradeep; de Waard, Anita; Hovy, Eduard H

    2016-01-01

    Automated machine-reading biocuration systems typically use sentence-by-sentence information extraction to construct meaning representations for use by curators. This does not directly reflect the typical discourse structure used by scientists to construct an argument from the experimental data available within a article, and is therefore less likely to correspond to representations typically used in biomedical informatics systems (let alone to the mental models that scientists have). In this study, we develop Natural Language Processing methods to locate, extract, and classify the individual passages of text from articles' Results sections that refer to experimental data. In our domain of interest (molecular biology studies of cancer signal transduction pathways), individual articles may contain as many as 30 small-scale individual experiments describing a variety of findings, upon which authors base their overall research conclusions. Our system automatically classifies discourse segments in these texts into seven categories (fact, hypothesis, problem, goal, method, result, implication) with an F-score of 0.68. These segments describe the essential building blocks of scientific discourse to (i) provide context for each experiment, (ii) report experimental details and (iii) explain the data's meaning in context. We evaluate our system on text passages from articles that were curated in molecular biology databases (the Pathway Logic Datum repository, the Molecular Interaction MINT and INTACT databases) linking individual experiments in articles to the type of assay used (coprecipitation, phosphorylation, translocation etc.). We use supervised machine learning techniques on text passages containing unambiguous references to experiments to obtain baseline F1 scores of 0.59 for MINT, 0.71 for INTACT and 0.63 for Pathway Logic. Although preliminary, these results support the notion that targeting information extraction methods to experimental results could provide

  12. Automated detection of discourse segment and experimental types from the text of cancer pathway results sections

    PubMed Central

    Burns, Gully A.P.C.; Dasigi, Pradeep; de Waard, Anita; Hovy, Eduard H.

    2016-01-01

    Automated machine-reading biocuration systems typically use sentence-by-sentence information extraction to construct meaning representations for use by curators. This does not directly reflect the typical discourse structure used by scientists to construct an argument from the experimental data available within a article, and is therefore less likely to correspond to representations typically used in biomedical informatics systems (let alone to the mental models that scientists have). In this study, we develop Natural Language Processing methods to locate, extract, and classify the individual passages of text from articles’ Results sections that refer to experimental data. In our domain of interest (molecular biology studies of cancer signal transduction pathways), individual articles may contain as many as 30 small-scale individual experiments describing a variety of findings, upon which authors base their overall research conclusions. Our system automatically classifies discourse segments in these texts into seven categories (fact, hypothesis, problem, goal, method, result, implication) with an F-score of 0.68. These segments describe the essential building blocks of scientific discourse to (i) provide context for each experiment, (ii) report experimental details and (iii) explain the data’s meaning in context. We evaluate our system on text passages from articles that were curated in molecular biology databases (the Pathway Logic Datum repository, the Molecular Interaction MINT and INTACT databases) linking individual experiments in articles to the type of assay used (coprecipitation, phosphorylation, translocation etc.). We use supervised machine learning techniques on text passages containing unambiguous references to experiments to obtain baseline F1 scores of 0.59 for MINT, 0.71 for INTACT and 0.63 for Pathway Logic. Although preliminary, these results support the notion that targeting information extraction methods to experimental results could provide

  13. Chaotic scattering in an open vase-shaped cavity: Topological, numerical, and experimental results

    NASA Astrophysics Data System (ADS)

    Novick, Jaison Allen

    point to each "detector point". We then construct the wave function directly from these classical trajectories using the two-dimensional WKB approximation. The wave function is Fourier Transformed using a Fast Fourier Transform algorithm resulting in a spectrum in which each peak corresponds to an interpolated trajectory. Our predictions are based on an imagined experiment that uses microwave propagation within an electromagnetic waveguide. Such an experiment exploits the fact that under suitable conditions both Maxwell's Equations and the Schrodinger Equation can be reduced to the Helmholtz Equation. Therefore, our predictions, while compared to the electromagnetic experiment, contain information about the quantum system. Identifying peaks in the transmission spectrum with chaotic trajectories will allow for an additional experimental verification of the intermediate recursive structure. Finally, we summarize our results and discuss possible extensions of this project.

  14. Predictions of the equation of state of cerium yield interesting insights into experimental results

    SciTech Connect

    Cherne, Frank J; Jensen, Brian J; Rigg, Paulo A; Elkin, Vyacheslav M

    2009-01-01

    There has been much interest in the past in understanding the dynamic properties of phase changing materials. In this paper we begin to explore the dynamic properties of the complex material of cerium. Cerium metal is a good candidate material to explore capabilities in determining a dynamic phase diagram on account of its low dynamic phase boundaries, namely, the {gamma}-{alpha}, and {alpha}-liquid phase boundaries. Here we present a combination of experimental results with calculated results to try to understand the dynamic behavior of the material. Using the front surface impact technique, we performed a series of experiments which displayed a rarefaction shock upon release. These experiments show that the reversion shock stresses occur at different magnitudes, allowing us to plot out the {gamma}-{alpha} phase boundary. Applying a multiphase equation of state a broader understanding of the experimental results will be discussed.

  15. Propagation effects for land mobile satellite systems: Overview of experimental and modeling results

    NASA Technical Reports Server (NTRS)

    Goldhirsh, Julius; Vogel, Wolfhard J.

    1992-01-01

    Models developed and experiments performed to characterize the propagation environment associated with land mobile communication using satellites are discussed. Experiments were carried out with transmitters on stratospheric balloons, remotely piloted aircraft, helicopters, and geostationary satellites. This text is comprised of compiled experimental results for the expressed use of communications engineers, designers of planned Land Mobile Satellite Systems (LMSS), and modelers of propagation effects. The results presented here are mostly derived from systematic studies of propagation effects for LMSS geometries in the United States associated with rural and suburban regions. Where applicable, the authors also draw liberally from the results of other related investigations in Canada, Europe, and Australia. Frequencies near 1500 MHz are emphasized to coincide with frequency bands allocated for LMSS by the International Telecommunication Union, although earlier experimental work at 870 MHz is also included.

  16. Experimental results from RO-PRO: a next generation system for low-energy desalination.

    PubMed

    Achilli, Andrea; Prante, Jeri L; Hancock, Nathan T; Maxwell, Eric B; Childress, Amy E

    2014-06-01

    A pilot system was designed and constructed to evaluate reverse osmosis (RO) energy reduction that can be achieved using pressure-retarded osmosis (PRO). The RO-PRO experimental system is the first known system to utilize energy from a volume of water transferred from atmospheric pressure to elevated pressure across a semipermeable membrane to prepressurize RO feedwater. In other words, the system demonstrated that pressure could be exchanged between PRO and RO subsystems. Additionally, the first experimental power density data for a RO-PRO system is now available. Average experimental power densities for the RO-PRO system ranged from 1.1 to 2.3 W/m2. This is higher than previous river-to-sea PRO pilot systems (1.5 W/m2) and closer to the goal of 5 W/m2 that would make PRO an economically feasible technology. Furthermore, isolated PRO system testing was performed to evaluate PRO element performance with higher cross-flow velocities and power densities exceeding 8 W/m2 were achieved with a 28 g/L NaCl draw solution. From this empirical data, inferences for future system performance can be drawn that indicate future RO-PRO systems may reduce the specific energy requirements for desalination by ∼1 kWh/m3. PMID:24798068

  17. Numerical predictions and experimental results of a dry bay fire environment.

    SciTech Connect

    Suo-Anttila, Jill Marie; Gill, Walter; Black, Amalia Rebecca

    2003-11-01

    The primary objective of the Safety and Survivability of Aircraft Initiative is to improve the safety and survivability of systems by using validated computational models to predict the hazard posed by a fire. To meet this need, computational model predictions and experimental data have been obtained to provide insight into the thermal environment inside an aircraft dry bay. The calculations were performed using the Vulcan fire code, and the experiments were completed using a specially designed full-scale fixture. The focus of this report is to present comparisons of the Vulcan results with experimental data for a selected test scenario and to assess the capability of the Vulcan fire field model to accurately predict dry bay fire scenarios. Also included is an assessment of the sensitivity of the fire model predictions to boundary condition distribution and grid resolution. To facilitate the comparison with experimental results, a brief description of the dry bay fire test fixture and a detailed specification of the geometry and boundary conditions are included. Overall, the Vulcan fire field model has shown the capability to predict the thermal hazard posed by a sustained pool fire within a dry bay compartment of an aircraft; although, more extensive experimental data and rigorous comparison are required for model validation.

  18. IFNAR signaling directly modulates T lymphocyte activity, resulting in milder experimental autoimmune encephalomyelitis development.

    PubMed

    Kavrochorianou, Nadia; Evangelidou, Maria; Markogiannaki, Melina; Tovey, Michael; Thyphronitis, George; Haralambous, Sylva

    2016-01-01

    Although interferon-β is used as first-line therapy for multiple sclerosis, the cell type-specific activity of type I interferons in multiple sclerosis and its animal model, experimental autoimmune encephalomyelitis, remains obscure. In this study, we have elucidated the in vivo immunomodulatory role of type I interferon signaling in T cells during experimental autoimmune encephalomyelitis by use of a novel transgenic mouse, carrying a cd2-ifnar1 transgene on a interferon-α/β receptor 1 null genetic background, thus allowing expression of the interferon-α/β receptor 1 and hence, a functional type I interferon receptor exclusively on T cells. These transgenic mice exhibited milder experimental autoimmune encephalomyelitis with reduced T cell infiltration, demyelination, and axonal damage in the central nervous system. It is noteworthy that interferon-β administration in transgenic mice generated a more pronounced, protective effect against experimental autoimmune encephalomyelitis compared with untreated littermates. In vivo studies demonstrated that before experimental autoimmune encephalomyelitis onset, endogenous type I interferon receptor signaling in T cells led to impaired T-helper 17 responses, with a reduced fraction of CCR6(+) CD4(+) T cells in the periphery. At the acute phase, an increased proportion of interleukin-10- and interferon-γ-producing CD4(+) T cells was detected in the periphery of the transgenic mice, accompanied by up-regulation of the interferon-γ-induced gene Irgm1 in peripheral T cells. Together, these results reveal a hitherto unknown T cell-associated protective role of type I interferon in experimental autoimmune encephalomyelitis that may provide valuable clues for designing novel therapeutic strategies for multiple sclerosis. PMID:26232452

  19. D-OPTIMAL EXPERIMENTAL DESIGNS TO TEST FOR DEPARTURE FROM ADDITIVITY IN A FIXED-RATIO MIXTURE RAY.

    EPA Science Inventory

    Traditional factorial designs for evaluating interactions among chemicals in a mixture are prohibitive when the number of chemicals is large. However, recent advances in statistically-based experimental design have made it easier to evaluate interactions involving many chemicals...

  20. Chlorine Stable Isotope Composition of Altered Oceanic Crust: Empirical and Experimental Results

    NASA Astrophysics Data System (ADS)

    Barnes, J.; Gardner, J. E.

    2010-12-01

    be ~ +2-3‰ heavier than those in which Cl bonds with 1+ cations (Schauble et al., 2003). These calculations have led to the hypothesis that silicates should have higher 37Cl/35Cl ratios than co-existing brines at room temperature (Schauble et al., 2003). Preliminary Cl isotope fractionation experiments between pargasitic amphibole and either seawater or brine (25 wt% NaCl solution) were run in cold-seal pressure vessels at 600°C and 500 bars. Preliminary results suggest that Δ37Clpargasite-Cl(aq) is within analytical error of the theoretically predicted fractionation factor, as well as measured δ37Cl values of AOC samples. Further work is planned to investigate the role of fluid-rock ratio and amphibole composition. Additional experimental data may allow us to infer the fluid-rock ratio and temperature during hydration of natural samples and to unravel the fluid histories recorded in the alteration minerals.

  1. Advanced Supersonic Nozzle Concepts: Experimental Flow Visualization Results Paired With LES

    NASA Astrophysics Data System (ADS)

    Berry, Matthew; Magstadt, Andrew; Stack, Cory; Gaitonde, Datta; Glauser, Mark; Syracuse University Team; The Ohio State University Team

    2015-11-01

    Advanced supersonic nozzle concepts are currently under investigation, utilizing multiple bypass streams and airframe integration to bolster performance and efficiency. This work focuses on the parametric study of a supersonic, multi-stream jet with aft deck. The single plane of symmetry, rectangular nozzle, displays very complex and unique flow characteristics. Flow visualization techniques in the form of PIV and schlieren capture flow features at various deck lengths and Mach numbers. LES is compared to the experimental results to both validate the computational model and identify limitations of the simulation. By comparing experimental results to LES, this study will help create a foundation of knowledge for advanced nozzle designs in future aircraft. SBIR Phase II with Spectral Energies, LLC under direction of Barry Kiel.

  2. Parallel Path Magnet Motor: Development of the Theoretical Model and Analysis of Experimental Results

    NASA Astrophysics Data System (ADS)

    Dirba, I.; Kleperis, J.

    2011-01-01

    Analytical and numerical modelling is performed for the linear actuator of a parallel path magnet motor. In the model based on finite-element analysis, the 3D problem is reduced to a 2D problem, which is sufficiently precise in a design aspect and allows modelling the principle of a parallel path motor. The paper also describes a relevant numerical model and gives comparison with experimental results. The numerical model includes all geometrical and physical characteristics of the motor components. The magnetic flux density and magnetic force are simulated using FEMM 4.2 software. An experimental model has also been developed and verified for the core of switchable magnetic flux linear actuator and motor. The results of experiments are compared with those of theoretical/analytical and numerical modelling.

  3. Gradual ordering in mollusk shell nacre: theoretical modeling and experimental results

    NASA Astrophysics Data System (ADS)

    Coppersmith, Susan N.

    2013-03-01

    Biominerals have attracted the attention of materials scientists, biologists, and mineralogists as well as physicists because of their remarkable mechanical properties and incompletely elucidated formation mechanisms. Nacre, or mother-of-pearl, is a layered biomineral composite that is widely studied because of its self-assembled, efficient and accurately ordered architecture results in remarkable resistance to fracture. New experimental tools enable us to obtain new information about the organization and structure of the mineral tablets in nacre. Our experimental and theoretical investigations yield strong evidence that orientational ordering of these tablets is the result of dynamical self-organization. This work was supported by NSF award CHE&DMR-0613972, DOE award DE-FG02-07ER15899, UW-Graduate School Vilas Award to P.U.P.A. Gilbert, and NSF awards DMR-0209630 and DMR-0906951 to SNC.

  4. Controls-structures interaction guest investigator program: Overview and phase 1 experimental results and future plans

    NASA Technical Reports Server (NTRS)

    Smith-Taylor, Rudeen; Tanner, Sharon E.

    1993-01-01

    The NASA Controls-Structures Interaction (CSI) Guest Investigator program is described in terms of its support of the development of CSI technologies. The program is based on the introduction of CSI researchers from industry and academia to available test facilities for experimental validation of technologies and methods. Phase 1 experimental results are reviewed with attention given to their use of the Mini-MAST test facility and the facility for the Advance Control Evaluation of Structures. Experiments were conducted regarding the following topics: collocated/noncollocated controllers, nonlinear math modeling, controller design, passive/active suspension systems design, and system identification and fault isolation. The results demonstrate that significantly enhanced performance from the control techniques can be achieved by integrating knowledge of the structural dynamics under consideration into the approaches.

  5. Experimental results of TDM/TDMA system via ETS-V

    NASA Astrophysics Data System (ADS)

    Sakasai, Makoto; Morikawa, Eihisa; Miura, Ryu; Arakaki, Yoshiya

    1992-07-01

    The Engineering Test Satellite-V (ETS-V) was launched in 1987, helping realize the Experimental Mobile Satellite System, where several types of mobile satellite communication experiments have been conducted. A simplified TDM/TDMA communication terminal equipment developed by the Communication Research Laboratory was used in ship experiments in the Pacific Ocean and South China Sea. This paper describes the data transmission, synchronization hold and initial acquisition characteristics resulting from these experiments.

  6. FIRST EXPERIMENTAL RESULTS FROM DEGAS, THE QUANTUM LIMITED BRIGHTNESS ELECTRON SOURCE

    SciTech Connect

    Zolotorev, Max S.; Commins, Eugene D.; Oneill, James; Sannibale, Fernando; Tremsin, Anton; Wan, Weishi

    2008-06-23

    The construction of DEGAS (DEGenerate Advanced Source), a proof of principle for a quantum limited brightness electron source, has been completed at the Lawrence Berkeley National Laboratory. The commissioning and the characterization of this source, designed to generate coherent single electron 'bunches' with brightness approaching the quantum limit at a repetition rate of few MHz, has been started. In this paper the first experimental results are described.

  7. Columbus meteoroid/debris protection study - Experimental simulation techniques and results

    NASA Astrophysics Data System (ADS)

    Schneider, E.; Kitta, K.; Stilp, A.; Lambert, M.; Reimerdes, H. G.

    1992-08-01

    The methods and measurement techniques used in experimental simulations of micrometeoroid and space debris impacts with the ESA's laboratory module Columbus are described. Experiments were carried out at the two-stage light gas gun acceleration facilities of the Ernst-Mach Institute. Results are presented on simulations of normal impacts on bumper systems, oblique impacts on dual bumper systems, impacts into cooled targets, impacts into pressurized targets, and planar impacts of low-density projectiles.

  8. Experimental results on combined ultraviolet-proton excitation of moon rock luminescence.

    NASA Technical Reports Server (NTRS)

    Nash, D. B.

    1973-01-01

    The experimental results reported indicate that a small synergistic effect may exist between near-UV radiation and solar-wind-energy protons in solar radiation that could slightly enhance luminescence generation on the moon's surface. The magnitude of the effect, however, is far too small to account for the apparent orders-of-magnitude discrepancy between reported telescope measurements of lunar luminescence and the limitation of lunar luminescence intensity based on lab studies of moon rocks.

  9. Optimal SNR exposure time for speckle imaging: experimental results with frequency-dependent detector noise

    NASA Astrophysics Data System (ADS)

    Tyler, David W.; Suzuki, Andrew H.; von Bokern, Mark A.; Keating, Donna D.; Roggemann, Michael C.

    1994-06-01

    We review recent arguments for using increased spectral bandwidth and exposure times to optimize the signal-to-noise ratio of speckle imaging estimators and discuss the tradeoff between camera exposure time and the number of data frames collected when observing time is fixed. We compare experimental results with a previously-derived expression for optimal exposure time and find reasonable agreement after accounting for frequency-dependent camera noise.

  10. A digital computer propulsion control facility: Description of capabilities and summary of experimental program results

    NASA Technical Reports Server (NTRS)

    Zeller, J. R.; Arpasi, D. J.; Lehtinen, B.

    1976-01-01

    Flight weight digital computers are being used today to carry out many of the propulsion system control functions previously delegated exclusively to hydromechanical controllers. An operational digital computer facility for propulsion control mode studies has been used successfully in several experimental programs. This paper describes the system and some of the results concerned with engine control, inlet control, and inlet engine integrated control. Analytical designs for the digital propulsion control modes include both classical and modern/optimal techniques.

  11. Calcium addition at the Hubbard Brook Experimental Forest increases sugar storage, antioxidant activity and cold tolerance in native red spruce (Picea rubens).

    PubMed

    Halman, Joshua M; Schaberg, Paul G; Hawley, Gary J; Eagar, Christopher

    2008-06-01

    In fall (November 2005) and winter (February 2006), we collected current-year foliage of native red spruce (Picea rubens Sarg.) growing in a reference watershed and in a watershed treated in 1999 with wollastonite (CaSiO(3), a slow-release calcium source) to simulate preindustrial soil calcium concentrations (Ca-addition watershed) at the Hubbard Brook Experimental Forest (Thornton, NH). We analyzed nutrition, soluble sugar concentrations, ascorbate peroxidase (APX) activity and cold tolerance, to evaluate the basis of recent (2003) differences between watersheds in red spruce foliar winter injury. Foliar Ca and total sugar concentrations were significantly higher in trees in the Ca-addition watershed than in trees in the reference watershed during both fall (P=0.037 and 0.035, respectively) and winter (P=0.055 and 0.036, respectively). The Ca-addition treatment significantly increased foliar fructose and glucose concentrations in November (P=0.013 and 0.007, respectively) and foliar sucrose concentrations in winter (P=0.040). Foliar APX activity was similar in trees in both watersheds during fall (P=0.28), but higher in trees in the Ca-addition watershed during winter (P=0.063). Cold tolerance of foliage was significantly greater in trees in the Ca-addition watershed than in trees in the reference watershed (P<0.001). Our results suggest that low foliar sugar concentrations and APX activity, and reduced cold tolerance in trees in the reference watershed contributed to their high vulnerability to winter injury in 2003. Because the reference watershed reflects forest conditions in the region, the consequences of impaired physiological function caused by soil Ca depletion may have widespread implications for forest health. PMID:18381266

  12. Characterisation and optimisation of flexible transfer lines for liquid helium. Part I: Experimental results

    NASA Astrophysics Data System (ADS)

    Dittmar, N.; Haberstroh, Ch.; Hesse, U.; Krzyzowski, M.

    2016-04-01

    The transfer of liquid helium (LHe) into mobile dewars or transport vessels is a common and unavoidable process at LHe decant stations. During this transfer reasonable amounts of LHe evaporate due to heat leak and pressure drop. Thus generated helium gas needs to be collected and reliquefied which requires a huge amount of electrical energy. Therefore, the design of transfer lines used at LHe decant stations has been optimised to establish a LHe transfer with minor evaporation losses which increases the overall efficiency and capacity of LHe decant stations. This paper presents the experimental results achieved during the thermohydraulic optimisation of a flexible LHe transfer line. An extensive measurement campaign with a set of dedicated transfer lines equipped with pressure and temperature sensors led to unique experimental data of this specific transfer process. The experimental results cover the heat leak, the pressure drop, the transfer rate, the outlet quality, and the cool-down and warm-up behaviour of the examined transfer lines. Based on the obtained results the design of the considered flexible transfer line has been optimised, featuring reduced heat leak and pressure drop.

  13. Estimating the hyperfine coupling parameters of the avian compass by comprehensively considering the available experimental results.

    PubMed

    Xu, Bao-Ming; Zou, Jian; Li, Jun-Gang; Shao, Bin

    2013-09-01

    Migratory birds can utilize the geomagnetic field for orientation and navigation through a widely accepted radical-pair mechanism. Although many theoretical works have been done, the available experimental results have not been fully considered, especially the temporary disorientation induced by the field which is increased by 30% of the geomagnetic field and the disorientation of the very weak resonant field of 15 nT. In this paper, we consider the monotonicity of the singlet yield angular profile as the prerequisite of direction sensitivity, and find that for some optimal values of the hyperfine coupling parameters (that is, the order of 10^{-7}∼10^{-6} meV) the experimental results available so far can be satisfied. We also investigate the effects of two decoherence environments and demonstrate that, in order to satisfy the available experimental results, the decoherence rate should be lower than the recombination rate. Finally, we investigate the effects of the fluctuating magnetic noises and find that the vertical noise destroys the monotonicity of the profile completely, but the parallel noise preserves the monotonicity perfectly and even can enhance the direction sensitivity. PMID:24125290

  14. Correlation of the experimental and numerical results for the holding power of dental, traumatic, and spinal screws.

    PubMed

    Lee, Chia-Ching; Lin, Shang-Chih; Wu, Shu-Wei; Li, Yu-Ching; Fu, Ping-Yuen

    2012-10-01

    The holding power of the bone-screw interfaces is one of the key factors in the clinical performance of screw design. The value of the holding power can be experimentally measured by pullout tests. Historically, some researchers have used the finite-element method to simulate the holding power of the different screws. Among them, however, the assumed displacement of the screw withdrawal is unreasonably small (about 0.005-1.0 mm). In addition, the chosen numerical indices are quite different, including maximum stress, strain energy, and reaction force. This study systematically uses dental, traumatic, and spinal screws to experimentally measure and numerically simulate their bone-purchasing ability within the synthetic bone. The testing results (pullout displacement and holding power) and numerical indices (maximum stress, total strain energy, and reaction forces) are chosen to calculate their correlation coefficients. The pullout displacement is divided into five regions from initial to final withdrawal. The experimental results demonstrate that the pullout displacement consistently occurs at the final region (0.6-1.6 mm) and is significantly higher than the assumed value of the literature studies. For all screw groups, the measured holding power within the initial region is not highly or even negatively correlated with the experimental and numerical results within the final region. The observation from the simulative results shows the maximum stress only reflects the loads concentrated at some local site(s) and is the least correlated to the measured holding power. Comparatively, both energy and force are more global indices to correlate with the gross failure at the bone-screw interfaces. However, the energy index is not suitable for the screw groups with rather tiny threads compared with the other specifications. In conclusion, the underestimated displacement leads to erroneous results in the screw-pullout simulation. Among three numerical indices the reaction

  15. Experimental results for a 1.5 MW, 110 GHz gyrotron oscillator with reduced mode competition

    SciTech Connect

    Choi, E.M.; Marchewka, C.D.; Mastovsky, I.; Sirigiri, J.R.; Shapiro, M.A.; Temkin, R.J.

    2006-02-15

    A new result from a 110 GHz gyrotron at MIT is reported with an output power of 1.67 MW and an efficiency of 42% when operated at 97 kV and 41 A for 3 {mu}s pulses in the TE{sub 22,6} mode. These results are a major improvement over results obtained with an earlier cavity design, which produced 1.43 MW of power at 37% efficiency. These new results were obtained using a cavity with a reduced output taper angle and a lower ohmic loss when compared with the earlier cavity. The improved operation is shown experimentally to be the result of reduced mode competition from the nearby TE{sub 19,7} mode. The reduced mode competition agrees well with an analysis of the startup scenario based on starting current simulations. The present results should prove useful in planning long pulse and CW versions of the 110 GHz gyrotron.

  16. Numerical prediction of freezing fronts in cryosurgery: comparison with experimental results.

    PubMed

    Fortin, André; Belhamadia, Youssef

    2005-08-01

    Recent developments in scientific computing now allow to consider realistic applications of numerical modelling to medicine. In this work, a numerical method is presented for the simulation of phase change occurring in cryosurgery applications. The ultimate goal of these simulations is to accurately predict the freezing front position and the thermal history inside the ice ball which is essential to determine if cancerous cells have been completely destroyed. A semi-phase field formulation including blood flow considerations is employed for the simulations. Numerical results are enhanced by the introduction of an anisotropic remeshing strategy. The numerical procedure is validated by comparing the predictions of the model with experimental results. PMID:16298846

  17. Comparison of Finite Element Non-Linear Beam Random Response with Experimental Results

    NASA Astrophysics Data System (ADS)

    Chen, R. R.; Mei, C.; Wolfe, HF

    1996-09-01

    A finite element formulation combined with the equivalent linearization technique and normal mode method is developed for the non-linear random response of beams subjected to acoustic and thermal loads applied simultaneously. To validate the present formulation and solution procedure, results are compared with the classical continuum solution and the Fokker-Planck-Kolmogorov equation solution. Comparison is also made with experimental data for a pre-stretched clamped beam. Random responses of thermally buckled simply supported beam, clamped beam and simply supported-clamped beam are presented. The comparison of the present simultaneously loaded response with the existing sequentially loaded results shows a significant difference between them.

  18. Studies of Multipactor in Dielectric-Loaded Accelerator Structures: Comparison of Simulation Results with Experimental Data

    SciTech Connect

    Sinitsyn, Oleksandr; Nusinovich, Gregory; Antonsen, Thomas Jr.

    2010-11-04

    In this paper new results of numerical studies of multipactor in dielectric-loaded accelerator structures are presented. The results are compared with experimental data obtained during recent studies of such structures performed by Argonne National Laboratory, the Naval Research Laboratory, SLAC National Accelerator Laboratory and Euclid TechLabs, LLC. Good agreement between the theory and experiment was observed for the structures with larger inner diameter, however the structures with smaller inner diameter demonstrated a discrepancy between the two. Possible reasons for such discrepancy are discussed.

  19. Preliminary results of the large experimental wind turbine phase of the national wind energy program

    NASA Technical Reports Server (NTRS)

    Thomas, R. L.; Sholes, T.; Sholes, J. E.

    1975-01-01

    The preliminary results of two projects in the development phase of reliable wind turbines designed to supply cost-competitive electrical energy were discussed. An experimental 100 kW wind turbine design and its status are first reviewed. The results of two parallel design studies for determining the configurations and power levels for wind turbines with minimum energy costs are also discussed. These studies predict wind energy costs of 1.5 to 7 cents per kW-h for wind turbines produced in quantities of 100 to 1000 per year and located at sites having average winds of 12 to 18 mph.

  20. The 3D structure of the hadrons: recents results and experimental program at Jefferson Lab

    SciTech Connect

    Munoz Camacho, Carlos

    2014-04-01

    The understanding of Quantum Chromodynamics (QCD) at large distances still remains one of the main outstanding problems of nuclear physics. Studying the internal structure of hadrons provides a way to probe QCD in the non-perturbative domain and can help us unravel the internal structure of the most elementary blocks of matter. Jefferson Lab (JLab) has already delivered results on how elementary quarks and gluons create nucleon structure and properties. The upgrade of JLab to 12 GeV will allow the full exploration of the valence-quark structure of nucleons and the extraction of real threedimensional pictures. I will present recent results and review the future experimental program at JLab.

  1. A three-phase series-parallel resonant converter -- analysis, design, simulation and experimental results

    SciTech Connect

    Bhat, A.K.S.; Zheng, L.

    1995-12-31

    A three-phase dc-to-dc series-parallel resonant converter is proposed and its operating modes for 180{degree} wide gating pulse scheme are explained. A detailed analysis of the converter using constant current model and Fourier series approach is presented. Based on the analysis, design curves are obtained and a design example of 1 kW converter is given. SPICE simulation results for the designed converter and experimental results for a 500 W converter are presented to verify the performance of the proposed converter for varying load conditions. The converter operates in lagging PF mode for the entire load range and requires a narrow variation in switching frequency.

  2. Importance of dose-rate and cell proliferation in the evaluation of biological experimental results

    NASA Technical Reports Server (NTRS)

    Curtis, S. B.

    1994-01-01

    The nuclei of cells within the bodies of astronauts traveling on extended missions outside the geomagnetosphere will experience single traversals of particles with high Linear Energy Transfer (LET) (e.g., one iron ion per one hundred years, on average) superimposed on a background of tracks with low LET (approximately one proton every two to three days, and one helium ion per month). In addition, some cell populations within the body will be proliferating, thus possibly providing increasing numbers of cells with 'initiated' targets for subsequent radiation hits. These temporal characteristics are not generally reproduced in laboratory experimental protocols. Implications of the differences in the temporal patterns of radiation delivery between conventionally designed radiation biology experiments and the pattern to be experienced in space are examined and the importance of dose-rate and cell proliferation are pointed out in the context of radiation risk assessment on long mission in space.

  3. Experimental Results of NWCF Run H4 Calcine Dissolution Studies Performed in FY-98 and -99

    SciTech Connect

    Garn, Troy Gerry; Herbst, Ronald Scott; Batcheller, Thomas Aquinas; Sierra, Tracy Laureena

    2001-08-01

    Dissolution experiments were performed on actual samples of NWCF Run H-4 radioactive calcine in fiscal years 1998 and 1999. Run H-4 is an aluminum/sodium blend calcine. Typical dissolution data indicates that between 90-95 wt% of H-4 calcine can be dissolved using 1gram of calcine per 10 mLs of 5-8M nitric acid at boiling temperature. Two liquid raffinate solutions composed of a WM-188/aluminum nitrate blend and a WM-185/aluminum nitrate blend were converted into calcine at the NWCF. Calcine made from each blend was collected and transferred to RAL for dissolution studies. The WM-188/aluminum nitrate blend calcine was dissolved with resultant solutions used as feed material for separation treatment experimentation. The WM-185/aluminum nitrate blend calcine dissolution testing was performed to determine compositional analyses of the dissolved solution and generate UDS for solid/liquid separation experiments. Analytical fusion techniques were then used to determine compositions of the solid calcine and UDS from dissolution. The results from each of these analyses were used to calculate elemental material balances around the dissolution process, validating the experimental data. This report contains all experimental data from dissolution experiments performed using both calcine blends.

  4. Wind Code Application to External Forebody Flowfields with Comparisons to Experimental Results

    NASA Technical Reports Server (NTRS)

    Frate, F. C.; Kim, H. D.

    2001-01-01

    The WIND Code, a general purpose Navier-Stokes solver, has been utilized to obtain supersonic external flowfield Computational Fluid Dynamics (CFD) solutions over an axisymmetric, parabolic forebody with comparisons made to wind tunnel experimental results. Various cases have been investigated at supersonic freestream conditions ranging from Mach 2.0 to 3.5, at 0 deg and 3 deg angles-of-attack, and with either a sharp-nose or blunt-nose forebody configuration. Both a turbulent (Baldwin-Lomax algebraic turbulence model) and a laminar model have been implemented in the CFD. Obtaining the solutions involved utilizing either the parabolized- or full-Navier-Stokes analyses supplied in WIND. Comparisons have been made with static pressure measurements, with boundary-layer rake and flowfield rake pitot pressure measurements, and with temperature sensitive paint experimental results. Using WIND's parabolized Navier-Stokes capability, grid sequencing, and the Baldwin-Lomax algebraic turbulence model allowed for significant reductions in computational time while still providing good agreement with experiment. Given that CFD and experiment compare well, WIND is found to be a good computational platform for solving this type of forebody problem, and the grids developed in conjunction with it will be used in the future to investigate varying freestream conditions not tested experimentally.

  5. Respiratory rate detection algorithm based on RGB-D camera: theoretical background and experimental results.

    PubMed

    Benetazzo, Flavia; Freddi, Alessandro; Monteriù, Andrea; Longhi, Sauro

    2014-09-01

    Both the theoretical background and the experimental results of an algorithm developed to perform human respiratory rate measurements without any physical contact are presented. Based on depth image sensing techniques, the respiratory rate is derived by measuring morphological changes of the chest wall. The algorithm identifies the human chest, computes its distance from the camera and compares this value with the instantaneous distance, discerning if it is due to the respiratory act or due to a limited movement of the person being monitored. To experimentally validate the proposed algorithm, the respiratory rate measurements coming from a spirometer were taken as a benchmark and compared with those estimated by the algorithm. Five tests were performed, with five different persons sat in front of the camera. The first test aimed to choose the suitable sampling frequency. The second test was conducted to compare the performances of the proposed system with respect to the gold standard in ideal conditions of light, orientation and clothing. The third, fourth and fifth tests evaluated the algorithm performances under different operating conditions. The experimental results showed that the system can correctly measure the respiratory rate, and it is a viable alternative to monitor the respiratory activity of a person without using invasive sensors. PMID:26609383

  6. Lanthanum Tricyanide-Catalyzed Acyl Silane-Ketone Benzoin Additions and Kinetic Resolution of Resultant α-Silyloxyketones

    PubMed Central

    Tarr, James C.

    2010-01-01

    We report the full account of our efforts on the lanthanum tricyanide-catalyzed acyl silane-ketone benzoin reaction. The reaction exhibits a wide scope in both acyl silane (aryl, alkyl) and ketone (aryl-alkyl, alkyl-alkyl, aryl-aryl, alkenyl-alkyl, alkynyl-alkyl) coupling partners. The diastereoselectivity of the reaction has been examined in both cyclic and acyclic systems. Cyclohexanones give products arising from equatorial attack by the acyl silane. The diastereoselectivity of acyl silane addition to acyclic α-hydroxy ketones can be controlled by varying the protecting group to obtain either Felkin-Ahn or chelation control. The resultant α-silyloxyketone products can be resolved with selectivity factors from 10 to 15 by subjecting racemic ketone benzoin products to CBS reduction. PMID:20392127

  7. Artificial cochlea and acoustic black hole travelling waves observation: Model and experimental results

    NASA Astrophysics Data System (ADS)

    Foucaud, Simon; Michon, Guilhem; Gourinat, Yves; Pelat, Adrien; Gautier, François

    2014-07-01

    An inhomogeneous fluid structure waveguide reproducing passive behaviour of the inner ear is modelled with the help of the Wentzel-Kramers-Brillouin method. A physical setup is designed and built. Experimental results are compared with a good correlation to theoretical ones. The experimental setup is a varying width plate immersed in fluid and terminated with an acoustic black hole. The varying width plate provides a spatial repartition of the vibration depending on the excitation frequency. The acoustic black hole is made by decreasing the plate's thickness with a quadratic profile and by covering this region with a thin film of viscoelastic material. Such a termination attenuates the flexural wave reflection at the end of the waveguide, turning standing waves into travelling waves.

  8. Shuttle Return To Flight Experimental Results: Cavity Effects on Boundary Layer Transition

    NASA Technical Reports Server (NTRS)

    Liechty, Derek S.; Horvath, Thomas J.; Berry, Scott A.

    2006-01-01

    The effect of an isolated rectangular cavity on hypersonic boundary layer transition of the windward surface of the Shuttle Orbiter has been experimentally examined in the Langley Aerothermodynamics Laboratory in support of an agency-wide effort to prepare the Shuttle Orbiter for return to flight. This experimental study was initiated to provide a cavity effects database for developing hypersonic transition criteria to support on-orbit decisions to repair a damaged thermal protection system. Boundary layer transition results were obtained using 0.0075-scale Orbiter models with simulated tile damage (rectangular cavities) of varying length, width, and depth. The database contained within this report will be used to formulate cavity-induced transition correlations using predicted boundary layer edge parameters.

  9. Design and Experimental Results for the S825 Airfoil; Period of Performance: 1998-1999

    SciTech Connect

    Somers, D. M.

    2005-01-01

    A 17%-thick, natural-laminar-flow airfoil, the S825, for the 75% blade radial station of 20- to 40-meter, variable-speed and variable-pitch (toward feather), horizontal-axis wind turbines has been designed and analyzed theoretically and verified experimentally in the NASA Langley Low-Turbulence Pressure Tunnel. The two primary objectives of high maximum lift, relatively insensitive to roughness and low-profile drag have been achieved. The airfoil exhibits a rapid, trailing-edge stall, which does not meet the design goal of a docile stall. The constraints on the pitching moment and the airfoil thickness have been satisfied. Comparisons of the theoretical and experimental results generally show good agreement.

  10. Radio propagation at 900 MHz in urban areas: Models with a fixed frequency and experimental results

    NASA Astrophysics Data System (ADS)

    Olivier, P.; Tiffon, J.

    1984-09-01

    Models which describe multipath propagation are examined in order to design a 900 MHz mobile communication system adapted to urban areas. A justification of the experimental data treatment is derived from this analysis. The measurements were made at a fixed 855 MHz frequency, transmitting from three locations. The fast fluctuations of the received signals are well represented by a Rayleigh process, which means that there are practically no paths of direct transmission. The coherence length is 1 m. The statistical distribution of the average field is Gaussian and the normal deviation decreases with the distance emitter-receiver. The empiric Okumura-Hata prediction model agrees well with the experimental results, giving an average cell field decreasing with distance with a logarithmic law.

  11. Shuttle Return To Flight Experimental Results: Protuberance Effects on Boundary Layer Transition

    NASA Technical Reports Server (NTRS)

    Liechty, Derek S.; Berry, Scott A.; Horvath, Thomas J.

    2006-01-01

    The effect of isolated roughness elements on the windward boundary layer of the Shuttle Orbiter has been experimentally examined in the Langley Aerothermodynamic Laboratory in support of an agency-wide effort to prepare the Shuttle Orbiter for return to flight. This experimental effort was initiated to provide a roughness effects database for developing transition criteria to support on-orbit decisions to repair damage to the thermal protection system. Boundary layer transition results were obtained using trips of varying heights and locations along the centerline and attachment lines of 0.0075-scale models. Global heat transfer images using phosphor thermography of the Orbiter windward surface and the corresponding heating distributions were used to infer the state of the boundary layer (laminar, transitional, or turbulent). The database contained within this report will be used to formulate protuberance-induced transition correlations using predicted boundary layer edge parameters.

  12. Use of dynamic theory to describe experimental results from volume holography

    NASA Technical Reports Server (NTRS)

    Magnusson, R.; Gaylord, T. K.

    1976-01-01

    The general applicability of dynamic theory to the description of the recording and readout characteristics of volume (thick) hologram gratings is indicated. In dynamic theory (as opposed to static theory), the volume nature of the thick holographic grating allows the interference of an incident light beam with its own diffracted beam inside the recording medium. This effect causes the continuous recording of another grating that alters the initial one, producing a resultant grating that is not uniform through the thickness of the recording material and a grating whose writing and reading characteristics may vary dramatically, depending on the recording material and the experimental conditions. A large number of diverse types of writing, reading, and angular-selectivity behavior have been reported. The dynamic theory of thick-hologram writing and reading is shown to predict qualitatively all of these various types of experimental behavior.

  13. Design and Experimental Results for the S827 Airfoil; Period of Performance: 1998--1999

    SciTech Connect

    Somers, D. M.

    2005-01-01

    A 21%-thick, natural-laminar-flow airfoil, the S827, for the 75% blade radial station of 40- to 50-meter, stall-regulated, horizontal-axis wind turbines has been designed and analyzed theoretically and verified experimentally in the NASA Langley Low-Turbulence Pressure Tunnel. The primary objective of restrained maximum lift has not been achieved, although the maximum lift is relatively insensitive to roughness, which meets the design goal. The airfoil exhibits a relatively docile stall, which meets the design goal. The primary objective of low profile drag has been achieved. The constraints on the pitching moment and the airfoil thickness have been satisfied. Comparisons of the theoretical and experimental results generally show good agreement with the exception of maximum lift, which is significantly underpredicted.

  14. Stimulating Contributions to Public Goods through Information Feedback: Some Experimental Results

    PubMed Central

    Janssen, Marco A.; Lee, Allen; Sundaram, Hari

    2016-01-01

    In traditional public good experiments participants receive an endowment from the experimenter that can be invested in a public good or kept in a private account. In this paper we present an experimental environment where participants can invest time during five days to contribute to a public good. Participants can make contributions to a linear public good by logging into a web application and performing virtual actions. We compared four treatments, with different group sizes and information of (relative) performance of other groups. We find that information feedback about performance of other groups has a small positive effect if we control for various attributes of the groups. Moreover, we find a significant effect of the contributions of others in the group in the previous day on the number of points earned in the current day. Our results confirm that people participate more when participants in their group participate more, and are influenced by information about the relative performance of other groups. PMID:27459070

  15. Activity of "nonspecific pancreatic carboxylesterase" in rat serum in experimentally induced acute pancreatitis (preliminary results).

    PubMed

    Kálmán, A; Kálmán, Z; Velösy, G; Vargha, G; Vargha, G; Papp, M

    1989-01-01

    The aim of this study was to obtain more information on the serum level of "nonspecific pancreatic carboxylesterase" (PCE) in experimentally induced acute pancreatitis in rats. The effects of caerulein stimulation, hepatic duct ligation, bile-pancreatic duct ligation or the effect of retrograde injection of saline, 5% taurocholate and sunflower oil were investigated. The activity of PCE and amylase was measured in the serum, pancreatic tissue, pancreatic juice and ascitic fluid. The changes in PCE activity were greater (both in directions to increase or decrease) than that of amylase, produced by different experimental procedures. The results confirm the thesis that the serum activity of PCE is a more sensitive diagnostic method than that of amylase to detect the inflammatory process in the pancreas or the effect of obstruction of the pancreatic duct. PMID:2480696

  16. Circular Samples as Objects for Magnetic Resonance Imaging - Mathematical Simulation, Experimental Results

    NASA Astrophysics Data System (ADS)

    Frollo, Ivan; Krafčík, Andrej; Andris, Peter; Přibil, Jiří; Dermek, Tomáš

    2015-12-01

    Circular samples are the frequent objects of "in-vitro" investigation using imaging method based on magnetic resonance principles. The goal of our investigation is imaging of thin planar layers without using the slide selection procedure, thus only 2D imaging or imaging of selected layers of samples in circular vessels, eppendorf tubes,.. compulsorily using procedure "slide selection". In spite of that the standard imaging methods was used, some specificity arise when mathematical modeling of these procedure is introduced. In the paper several mathematical models were presented that were compared with real experimental results. Circular magnetic samples were placed into the homogenous magnetic field of a low field imager based on nuclear magnetic resonance. For experimental verification an MRI 0.178 Tesla ESAOTE Opera imager was used.

  17. Rotational knee strain resulting in patellar dislocation. An experimental study in rabbits.

    PubMed

    Finsterbush, A

    1982-09-01

    The right lower extremities of 64 young rabbits were immobilized by a plaster spica. The animals developed a gait pattern, which included internal tibial rotation and adduction of the left (unimmobilized) tibia. Twenty-one of the animals developed medial patellar dislocation in the unimmobilized lower extremity. The mechanism of the patellar dislocation in this experimental model was possibly overstretching of the lateral colateral ligament and the lateral side of the joint capsule, associated with medial rotation of the tibia and the tibial tubercle. The direction of patellar pull when gliding inferiorly during knee flexion was shifted medially, resulting in patellar dislocation and secondarily, in formation of an exostosis under the displaced patella. Hip arthrodesis in humans, as a course of rotational instability of the contralateral knee, resembles some aspects of this experimental condition. PMID:7105585

  18. LBE water interaction in sub-critical reactors: First experimental and modelling results

    NASA Astrophysics Data System (ADS)

    Ciampichetti, A.; Agostini, P.; Benamati, G.; Bandini, G.; Pellini, D.; Forgione, N.; Oriolo, F.; Ambrosini, W.

    2008-06-01

    This paper concerns the study of the phenomena involved in the interaction between LBE and pressurised water which could occur in some hypothetical accidents in accelerator driven system type reactors. The LIFUS 5 facility was designed and built at ENEA-Brasimone to reproduce this kind of interaction in a wide range of conditions. The first test of the experimental program was carried out injecting water at 70 bar and 235 °C in a reaction vessel containing LBE at 1 bar and 350 °C. A pressurisation up to 80 bar was observed in the test section during the considered transient. The SIMMER III code was used to simulate the performed test. The calculated data agree in a satisfactory way with the experimental results giving confidence in the possibility to use this code for safety analyses of heavy liquid metal cooled reactors.

  19. Supersonic Retropropulsion Experimental Results from the NASA Ames 9- x 7-Foot Supersonic Wind Tunnel

    NASA Technical Reports Server (NTRS)

    Berry, Scott A.; Rhode, Matthew N.; Edquist, Karl T.

    2012-01-01

    Supersonic retropropulsion was experimentally examined in the Ames Research Center 9x7-Foot Supersonic Wind Tunnel at Mach 1.8 and 2.4. The experimental model, previously designed for and tested in the Langley Research Center Unitary Plan Wind Tunnel at Mach 2.4, 3.5 and 4.6, was a 5-in diameter 70-deg sphere-cone forebody with a 9.55-in long cylindrical aftbody. The forebody was designed to accommodate up to four 4:1 area ratio nozzles, one on the model centerline and the other three on the half radius spaced 120-deg apart. Surface pressure and flow visualization were the primary measurements, including high-speed data to investigate the dynamics of the interactions between the bow and nozzle shocks. Three blowing configurations were tested with thrust coefficients up to 10 and angles of attack up to 20-deg. Preliminary results and observations from the test are provided

  20. Crystalline and Spectroscopic Experimental Study of the Dinitromesithylen (DNM) Compared with the Theoretical Results

    NASA Astrophysics Data System (ADS)

    Brihi, O.; Medjroubi, M. L.; Hamdouni, N.; Meinnel, J.; Boucekkine, A.; Boudjada, A.

    The aim by our group is to understand the behaviour of the grouping methyl starting from the study of molecules having a great symmetry. In this part of work, it is had the crystalline structure of the dinitromesitylen (DNM) who is solved starting from the diffraction of x-rays starting from a monocrystal at the ambient temperature. Parallel to the experimental study, we undertook theoretical calculations conformation of the insulated molecule of DNM by using the methods of the DFT (Density Functional Theory).Calculations of optimization of the molecular conformation of the DNM by using the chain of program GAUSSIAN03 and functional MPW1PW91, B3LYP level with the 6-311G and LANL2DZ bases gave a conformation Cs with results very close to the experiment for the lengths and the angles of bond. The computation results obtained starting from the base set (6-311G) and functional MPW1PW91 give for the conformation of Dinitromesitylen (DNM) a good agreement of about a 1.9% for the lengths of bond and 1.2% for the angles of bond compared with the results of the diffraction of x-rays. Calculations of Raman and infra-red spectroscopy undertaken starting from the results of optimization by using same functional MPW1PW91 and B3LYP and the sets of bases 6-311G LanL2DZ led to the values of frequencies very close to the experimental results.

  1. Vibration Based Crack Detection in a Rotating Disk. Part 2; Experimental Results

    NASA Technical Reports Server (NTRS)

    Gyekenyesi, Andrew L.; Sawicki, Jerzy T.; Martin, Richard E.; Haase, Wayne C.; Baaklini, George

    2005-01-01

    This paper describes the experimental results concerning the detection of a crack in a rotating disk. The goal was to utilize blade tip clearance and shaft vibration measurements to monitor changes in the system's center of mass and/or blade deformation behaviors. The concept of the approach is based on the fact that the development of a disk crack results in a distorted strain field within the component. As a result, a minute deformation in the disk's geometry as well as a change in the system's center of mass occurs. Here, a notch was used to simulate an actual crack. The vibration based experimental results failed to identify the existence of a notch when utilizing the approach described above, even with a rather large, circumferential notch (l.2 in.) located approximately mid-span on the disk (disk radius = 4.63 in. with notch at r = 2.12 in.). This was somewhat expected, since the finite element based results in Part 1 of this study predicted changes in blade tip clearance as well as center of mass shifts due to a notch to be less than 0.001 in. Therefore, the small changes incurred by the notch could not be differentiated from the mechanical and electrical noise of the rotor system. Although the crack detection technique of interest failed to identify the existence ofthe notch, the vibration data produced and captured here will be utilized in upcoming studies that will focus on different data mining techniques concerning damage detection in a disk.

  2. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  3. Photovoltaic Grid-Connected Modeling and Characterization Based on Experimental Results

    PubMed Central

    Humada, Ali M.; Hojabri, Mojgan; Sulaiman, Mohd Herwan Bin; Hamada, Hussein M.; Ahmed, Mushtaq N.

    2016-01-01

    A grid-connected photovoltaic (PV) system operates under fluctuated weather condition has been modeled and characterized based on specific test bed. A mathematical model of a small-scale PV system has been developed mainly for residential usage, and the potential results have been simulated. The proposed PV model based on three PV parameters, which are the photocurrent, IL, the reverse diode saturation current, Io, the ideality factor of diode, n. Accuracy of the proposed model and its parameters evaluated based on different benchmarks. The results showed that the proposed model fitting the experimental results with high accuracy compare to the other models, as well as the I-V characteristic curve. The results of this study can be considered valuable in terms of the installation of a grid-connected PV system in fluctuated climatic conditions. PMID:27035575

  4. Comparison between experimental and analytical results for seesaw energy dissipation systems using fluid viscous dampers

    NASA Astrophysics Data System (ADS)

    Kang, Jae-Do; Tagawa, Hiroshi

    2016-03-01

    This paper presents results of experimental and numerical investigations of a seesaw energy dissipation system (SEDS) using fluid viscous dampers (FVDs). To confirm the characteristics of the FVDs used in the tests, harmonic dynamic loading tests were conducted in advance of the free vibration tests and the shaking table tests. Shaking table tests were conducted to demonstrate the damping capacity of the SEDS under random excitations such as seismic waves, and the results showed SEDSs have sufficient damping capacity for reducing the seismic response of frames. Free vibration tests were conducted to confirm the reliability of simplified analysis. Time history response analyses were also conducted and the results are in close agreement with shaking table test results.

  5. Photovoltaic Grid-Connected Modeling and Characterization Based on Experimental Results.

    PubMed

    Humada, Ali M; Hojabri, Mojgan; Sulaiman, Mohd Herwan Bin; Hamada, Hussein M; Ahmed, Mushtaq N

    2016-01-01

    A grid-connected photovoltaic (PV) system operates under fluctuated weather condition has been modeled and characterized based on specific test bed. A mathematical model of a small-scale PV system has been developed mainly for residential usage, and the potential results have been simulated. The proposed PV model based on three PV parameters, which are the photocurrent, IL, the reverse diode saturation current, Io, the ideality factor of diode, n. Accuracy of the proposed model and its parameters evaluated based on different benchmarks. The results showed that the proposed model fitting the experimental results with high accuracy compare to the other models, as well as the I-V characteristic curve. The results of this study can be considered valuable in terms of the installation of a grid-connected PV system in fluctuated climatic conditions. PMID:27035575

  6. Supersonic Retropropulsion Experimental Results from the NASA Langley Unitary Plan Wind Tunnel

    NASA Technical Reports Server (NTRS)

    Berry, Scott A.; Rhode, Matthew N.; Edquist, Karl T.; Player, Charles J.

    2011-01-01

    A new supersonic retropropulsion experimental effort, intended to provide code validation data, was recently completed in the Langley Research Center Unitary Plan Wind Tunnel Test Section 2 over the Mach number range from 2.4 to 4.6. The experimental model was designed using insights gained from pre-test computations, which were instrumental for sizing and refining the model to minimize tunnel wall interference and internal flow separation concerns. A 5-in diameter 70-deg sphere-cone forebody with a roughly 10-in long cylindrical aftbody was the baseline configuration selected for this study. The forebody was designed to accommodate up to four 4:1 area ratio supersonic nozzles. Primary measurements for this model were a large number of surface pressures on the forebody and aftbody. Supplemental data included high-speed Schlieren video and internal pressures and temperatures. The run matrix was developed to allow for the quantification of various sources of experimental uncertainty, such as random errors due to run-to-run variations and bias errors due to flow field or model misalignments. Preliminary results and observations from the test are presented, while detailed data and uncertainty analyses are ongoing.

  7. Transdermal flux predictions for selected selective oestrogen receptor modulators (SERMs): comparison with experimental results.

    PubMed

    Güngör, Sevgi; Delgado-Charro, M Begoña; Masini-Etévé, Valérie; Potts, Russell O; Guy, Richard H

    2013-12-28

    The aim of this work was to evaluate the feasibility of delivering transdermally a series of highly lipophilic compounds (log P ~4-7), comprising several selective oestrogen receptor modulators and a modified testosterone (danazol). The maximum fluxes of the drugs were predicted theoretically using the modified Potts & Guy algorithm (to determine the permeability coefficient (kp) from water) and the calculated aqueous solubilities. The correction provided by Cleek & Bunge took into account the contribution of the viable epidermal barrier to the skin permeation of highly lipophilic compounds. Experimental measurements of drug fluxes from saturated hydroalcoholic solutions were determined in vitro through excised pig skin. Overall, the predicted fluxes were in good general agreement (within a factor of 10) with the experimental results. Most of the experimental fluxes were greater than those predicted theoretically suggesting that the 70:30 v/v ethanol-water vehicle employed may have had a modest skin penetration enhancement effect. This investigation shows that the transdermal fluxes of highly lipophilic compounds can be reasonably predicted from first principles provided that the viable epidermis, underlying the stratum corneum, is included as a potentially important contributor to the skin's overall barrier function. Furthermore, the absolute values of the measured fluxes, when considered in parallel with previous clinical studies, indicate that it might be feasible to topically deliver a therapeutically useful amount of some of the compounds considered to treat cancerous breast tissue. PMID:24076520

  8. Experimental results of the investigation of a laboratory cold seal TEC

    SciTech Connect

    Yarygin, V.I.; Mironov, V.S.; Kiryushenko, A.I.; Mikheyev, A.S.; Tulin, S.M.; Meleta, Y.A.; Yarygin, D.V.; Wolff, L.R.

    1998-07-01

    The results of experimental investigation of characteristics of a laboratory Cold Seal Thermionic Energy Converter (CS TEC) with a built-in gas regulated heat pipe are discussed. They were obtained to justify the electric-thermal-physical characteristics of a flame heated CS TEC. The CS TEC design is being developed by a joint Russian-Dutch team of researchers with support of the Netherlands Organization for Scientific Research (NWO). The concept of this flame heated Cold Seal TEC was presented in a previous publication. This paper deals with experimental data on the emission properties of electrodes and the voltage-current characteristics (JVC) of an electrically heated laboratory TEC. They were studied over a wide interval of variation in the electrode temperature and interelectrode distance. The cesium vapour working pressure in the interelectrode space was regulated both by the conventional method (using a cesium reservoir) and by means of a gas regulated cesium heat pipe. This allows one to use a rubber (viton) seal in the non-condensing gas (argon) area. The acquired experimental characteristics will allow one to identify the inner parameters at further stages of their work when testing the full-scale flame heated CS TEC.

  9. Model assessment of additional contamination of water bodies as a result of wildfires in the Chernobyl exclusion zone.

    PubMed

    Bondar, Yu I; Navumau, A D; Nikitin, A N; Brown, J; Dowdall, M

    2014-12-01

    Forest fires and wild fires are recognized as a possible cause of resuspension and redistribution of radioactive substances when occurring on lands contaminated with such materials, and as such are a matter of concern within the regions of Belarus and the Ukraine which were contaminated by the Chernobyl accident in 1986. Modelling the effects of such fires on radioactive contaminants is a complex matter given the number of variables involved. In this paper, a probabilistic model was developed using empirical data drawn from the Polessie State Radiation-Ecological Reserve (PSRER), Belarus, and the Maximum Entropy Method. Using the model, it was possible to derive estimates of the contribution of fire events to overall variability in the levels of (137)Cs and (239,240)Pu in ground air as well as estimates of the deposition of these radionuclides to specific water bodies within the contaminated areas of Belarus. Results indicate that fire events are potentially significant redistributors of radioactive contaminants within the study area and may result in additional contamination being introduced to water bodies. PMID:25240987

  10. Can homeopathy bring additional benefits to thalassemic patients on hydroxyurea therapy? Encouraging results of a preliminary study.

    PubMed

    Banerjee, Antara; Chakrabarty, Sudipa Basu; Karmakar, Susanta Roy; Chakrabarty, Amit; Biswas, Surjyo Jyoti; Haque, Saiful; Das, Debarsi; Paul, Saili; Mandal, Biswapati; Naoual, Boujedaini; Belon, Philippe; Khuda-Bukhsh, Anisur Rahman

    2010-03-01

    Several homeopathic remedies, namely, Pulsatilla Nigricans (30th potency), Ceanothus Americanus (both mother tincture and 6th potency) and Ferrum Metallicum (30th potency) selected as per similia principles were administered to 38 thalassemic patients receiving Hydroxyurea (HU) therapy for a varying period of time. Levels of serum ferritin (SF), fetal hemoglobin (HbF), hemoglobin (Hb), platelet count (PC), mean corpuscular volume (MCV), mean corpuscular hemoglobin concentration (MCHC), mean corpuscular hemoglobin (MCH), white blood cell (WBC) count, bilirubin content, alanine amino transferase (ALT), aspartate amino transferase (AST) and serum total protein content of patients were determined before and 3 months after administration of the homeopathic remedies in combination with HU to evaluate additional benefits, if any, derived by the homeopathic remedies, by comparing the data with those of 38 subjects receiving only HU therapy. Preliminary results indicated that there was a significant decrease in the SF and increase in HbF levels in the combined, treated subjects. Although the changes in other parameters were not so significant, there was a significant decrease in size of spleen in most patients with spleenomegaly and improvement in general health conditions along with an increased gap between transfusions in most patients receiving the combined homeopathic treatment. The homeopathic remedies being inexpensive and without any known side-effects seem to have great potentials in bringing additional benefits to thalassemic patients; particularly in the developing world where blood transfusions suffer from inadequate screening and fall short of the stringent safety standards followed in the developed countries. Further independent studies are encouraged. PMID:18955271

  11. Comparison of experimental data with results of some drying models for regularly shaped products

    NASA Astrophysics Data System (ADS)

    Kaya, Ahmet; Aydın, Orhan; Dincer, Ibrahim

    2010-05-01

    This paper presents an experimental and theoretical investigation of drying of moist slab, cylinder and spherical products to study dimensionless moisture content distributions and their comparisons. Experimental study includes the measurement of the moisture content distributions of slab and cylindrical carrot, slab and cylindrical pumpkin and spherical blueberry during drying at various temperatures (e.g., 30, 40, 50 and 60°C) at specific constant velocity ( U = 1 m/s) and the relative humidity φ = 30%. In theoretical analysis, two moisture transfer models are used to determine drying process parameters (e.g., drying coefficient and lag factor) and moisture transfer parameters (e.g., moisture diffusivity and moisture transfer coefficient), and to calculate the dimensionless moisture content distributions. The calculated results are then compared with the experimental moisture data. A considerably high agreement is obtained between the calculations and experimental measurements for the cases considered. The effective diffusivity values were evaluated between 0.741 × 10-5 and 5.981 × 10-5 m2/h for slab products, 0.818 × 10-5 and 6.287 × 10-5 m2/h for cylindrical products and 1.213 × 10-7 and 7.589 × 10-7 m2/h spherical products using the Model-I and 0.316 × 10-5-5.072 × 10-5 m2/h for slab products, 0.580 × 10-5-9.587 × 10-5 m2/h for cylindrical products and 1.408 × 10-7-13.913 × 10-7 m2/h spherical products using the Model-II.

  12. SWAP Modeling Results of Monitored Soil Water Moisture Data of Irrigation Experimental Study

    NASA Astrophysics Data System (ADS)

    Zeiliger, A.; Garsia-Orenes, F.; van den Elsen, E.; Mataix-Solera, J.; Semenov, V.

    2009-04-01

    In arid and semiarid zones of the Mediterranean regions a shortage of fresh water resources constitutes some time dramatic problem. In these regions with growing population and the scarce of rainfall irregularity in time during growing season an efficient use of water irrigation became a main challenge for future extensive agriculture development. In the frame of FP6 Water-Reuse project 516731 project a special field experimentation has been carried out in Alicante Region of Spain (Location UTM X: 693.809, Y: 4.279.922, Z: 626) on a Sandy Typic Xerofkuvent (Soil Survey Staff, 1999), Calcaric Fluvisol (WRB, FAO, 1989). with aim to investigate water regime in water repellent soils under irrigation of vine Vitus Labrusca. During field experimentation from 2006 till 2008 on 9 plots, there the same regime of irrigation water application was maintained, a monitoring of weather parameters was done by automatic meteorological station as well as a monitoring of soil water moisture was done by set of data-loggers and TDR-soil moisture sensors ECO-2 installed at different depts. SWAP model was used to simulate water regime of irrigated plots. Empirical coefficients of van Genuchten-Mualem's equations were calculated by pedotransfer functions derived from HYPRES data base using measured values of bulk density, organic matter content and soil texture. Testing of validity of the use of estimated curves was done by comparison with unsaturated soil hydraulic parameters of water retention and hydraulic conductivity measured in vitro by Wind's method on soil samples. Calibration of SWAP model for each plot was done on measured soil moisture data of irrigation events by adjusting a value of saturated hydraulic coefficient. Verification of the SWAP model was done by full range of experimental data. Similarity and non-similarity of the water regime at experimental plots as well as results of verification of SWAP model were analyzed

  13. Contrasting soil fungal community responses to experimental nitrogen addition using the large subunit rRNA taxonomic marker and cellobiohydrolase I functional marker.

    PubMed

    Mueller, Rebecca C; Balasch, Monica M; Kuske, Cheryl R

    2014-09-01

    Human activities have resulted in increased nitrogen inputs into terrestrial ecosystems, but the impact of nitrogen on ecosystem function, such as nutrient cycling, will depend at least in part on the response of soil fungal communities. We examined the response of soil fungi to experimental nitrogen addition in a loblolly pine forest (North Carolina, USA) using a taxonomic marker (large subunit rDNA, LSU) and a functional marker involved in a critical step of cellulose degradation (cellobiohydrolase, cbhI) at five time points that spanned fourteen months. Sampling date had no impact on fungal community richness or composition for either gene. Based on the LSU, nitrogen addition led to increased fungal community richness, reduced relative abundance of fungi in the phylum Basidiomycota and altered community composition; however, similar shifts were not observed with cbhI. Fungal community dissimilarity of the LSU and cbhI genes was significantly correlated in the ambient plots, but not in nitrogen-amended plots, suggesting either functional redundancy of fungi with the cbhI gene or shifts in other functional groups in response to nitrogen addition. To determine whether sequence similarity of cbhI could be predicted based on taxonomic relatedness of fungi, we conducted a phylogenetic analysis of publically available cbhI sequences from known isolates and found that for a subset of isolates, similar cbhI genes were found within distantly related fungal taxa. Together, these findings suggest that taxonomic shifts in the total fungal community do not necessarily result in changes in the functional diversity of fungi. PMID:25039479

  14. Seeded free electron laser operating with two colors: Comments on experimental results

    NASA Astrophysics Data System (ADS)

    Carpanese, M.; Ciocci, F.; Dattoli, G.; Petralia, A.; Petrillo, V.; Torre, A.

    2016-05-01

    Free electron lasers operating with two colors are promising devices for applications. The relevant modelization has provided a good understanding of the underlying physics. In this paper we present an analysis of the experimental results obtained at SPARC_LAB concerning seeded two-colors free electron laser (FEL) operation. The use of an ad hoc developed semi-analytical model based on the small-signal FEL integral equation reproduces most of the observed phenomenology. The paper discusses the reliability of the proposed method, the range of validity and its possible improvement.

  15. Comparison of Theoretical Stresses and Deflections of Multicell Wings with Experimental Results Obtained from Plastic Models

    NASA Technical Reports Server (NTRS)

    Zender, George W

    1956-01-01

    The experimental deflections and stresses of six plastic multicell-wing models of unswept, delta, and swept plan form are presented and compared with previously published theoretical results obtained by the electrical analog method. The comparisons indicate that the theory is reliable except for the evaluation of stresses in the vicinity of the leading edge of delta wings and the leading and trailing edges of swept wings. The stresses in these regions are questionable, apparently because of simplifications employed in idealizing the actual structure for theoretical purposes and because of local effects of concentrated loads.

  16. Experimental results of a deflected thrust V/STOL nozzle research program

    NASA Technical Reports Server (NTRS)

    Burstadt, P. L.; Johns, A. L.

    1983-01-01

    Four deflected thrust nozzle concepts, designed to operate at the low pressure ratio typical of high bypass-ratio turbofan engines for medium speed (subsonic) V/STOL aircraft, were studied. Maps of overall performance characteristics and exit velocity distributions are used to highlight similarities and differences between the four concepts. Analytically determined secondary flows at the exit of a 90 deg circular pipe bend are compared with the experimental results from the more complex three dimensional geometries. The relative impact of total-pressure losses and secondary flows on nozzle thrust coefficient is addressed by numerical integration of exit velocity measurements. Previously announced in STAR as N83-25657

  17. Experimental results of a deflected thrust V/STOL nozzle research program

    NASA Technical Reports Server (NTRS)

    Burstadt, P. L.; Johns, A. L.

    1983-01-01

    Four deflected thrust nozzle concepts, designed to operate at the low pressure ratio typical of high bypass-ratio turbofan engines for medium speed (subsonic) V/STOL aircraft, were studied. Maps of overall performance characteristics and exit velocity distributions are used to highlight similarities and differences between the four concepts. Analytically determined secondary flows at the exit of a 90 deg circular pipe bend are compared with the experimental results from the more complex three dimensional geometries. The relative impact of total-pressure losses and secondary flows on nozzle thrust coefficient is addressed by numerical integration of exit velocity measurements.

  18. Development of X-ray microcalorimeters based on SOI technology and experimental results

    NASA Astrophysics Data System (ADS)

    Szeflinski, V.; Aliane, A.; De Moro, F.; Pigot, C.; Sauvageot, J.-L.; Agnèse, P.; Gasse, A.; Ribot, H.; Gremion, E.; De La Broise, X.; Navick, X. F.

    2009-10-01

    We are developing an X-ray spectro-imaging detector at cryogenic temperature (<100 mK) for next space generation missions, using silicon technology. Each pixel of this array detector is made of a tantalum absorber bonded by indium bump hybridization, to an implanted and high-temperature diffused silicon thermistor. The thermo-mechanical link, provided by the indium bump hybridization, is being improved in terms of thermal capacitance. We present the state of development and experimental results on this new generation of X-ray microcalorimeters.

  19. Experimental and Theoretical Results in Output-Trajectory Redesign for Flexible Structures

    NASA Technical Reports Server (NTRS)

    Dewey, J. S.; Devasia, Santosh

    1996-01-01

    In this paper we study the optimal redesign of output trajectory for linear invertible systems. This is particularly important for tracking control of flexible structures because the input-state trajectories that achieve the required output may cause excessive vibrations in the structure. A trade-off is then required between tracking and vibrations reduction. We pose and solve this problem as the minimization of a quadratic cost function. The theory is developed and applied to the output tracking of a flexible structure and experimental results are presented.

  20. Active vibration absorber for the CSI evolutionary model - Design and experimental results. [Controls Structures Interaction

    NASA Technical Reports Server (NTRS)

    Bruner, Anne M.; Belvin, W. Keith; Horta, Lucas G.; Juang, Jer-Nan

    1991-01-01

    The development of control of large flexible structures technology must include practical demonstrations to aid in the understanding and characterization of controlled structures in space. To support this effort, a testbed facility has been developed to study practical implementation of new control technologies under realistic conditions. The paper discusses the design of a second order, acceleration feedback controller which acts as an active vibration absorber. This controller provides guaranteed stability margins for collocated sensor/actuator pairs in the absence of sensor/actuator dynamics and computational time delay. Experimental results in the presence of these factors are presented and discussed. The robustness of this design under model uncertainty is demonstrated.

  1. Recent experimental results from a long-pulse J-band relativistic klystron amplifier developmental effort

    SciTech Connect

    Kato, K.G.; Crouch, D.D.; Sar, D.R.; Speciale, R.A.; Carlsten, B.E.; Fazio, M.V.; Haynes, W.B.; Stringfield, R.M.

    1994-12-31

    Recent experimental results, supporting simulations, and design modeling are presented from a developmental effort to a produce a long pulse ({approximately}1{mu}s) J-band (5.85-8.2 GHz) relativistic klystron amplifier (RKA) of the high current NRL genealogy. This RKA is designed to operate at approximately 6.6 GHz, with a desired RF output {approximately}700 MW. Conversion of electron beam energy to microwave energy is obtained by a mock magnetically insulated coaxial converter which, in various incarnations, can be made to be either a cavity gap extractor or an inverse cathode.

  2. Experimental Results From the Thermal Energy Storage-1 (TES-1) Flight Experiment

    NASA Technical Reports Server (NTRS)

    Jacqmin, David

    1995-01-01

    The Thermal Energy Storage (TES) experiments are designed to provide data to help researchers understand the long-duration microgravity behavior of thermal energy storage fluoride salts that undergo repeated melting and freezing. Such data, which have never been obtained before, have direct application to space-based solar dynamic power systems. These power systems will store solar energy in a thermal energy salt, such as lithium fluoride (LiF) or a eutectic of lithium fluoride/calcium difluoride (LiF-CaF2) (which melts at a lower temperature). The energy will be stored as the latent heat of fusion when the salt is melted by absorbing solar thermal energy. The stored energy will then be extracted during the shade portion of the orbit, enabling the solar dynamic power system to provide constant electrical power over the entire orbit. Analytical computer codes have been developed to predict the performance of a spacebased solar dynamic power system. However, the analytical predictions must be verified experimentally before the analytical results can be used for future space power design applications. Four TES flight experiments will be used to obtain the needed experimental data. This article focuses on the flight results from the first experiment, TES-1, in comparison to the predicted results from the Thermal Energy Storage Simulation (TESSIM) analytical computer code.

  3. Investigation of sonar transponders for offshore wind farms: modeling approach, experimental setup, and results.

    PubMed

    Fricke, Moritz B; Rolfes, Raimund

    2013-11-01

    The installation of offshore wind farms in the German Exclusive Economic Zone requires the deployment of sonar transponders to prevent collisions with submarines. The general requirements for these systems have been previously worked out by the Research Department for Underwater Acoustics and Marine Geophysics of the Bundeswehr. In this article, the major results of the research project "Investigation of Sonar Transponders for Offshore Wind Farms" are presented. For theoretical investigations a hybrid approach was implemented using the boundary element method to calculate the source directivity and a three-dimensional ray-tracing algorithm to estimate the transmission loss. The angle-dependence of the sound field as well as the weather-dependence of the transmission loss are compared to experimental results gathered at the offshore wind farm alpha ventus, located 45 km north of the island Borkum. While theoretical and experimental results are in general agreement, the implemented model slightly underestimates scattering at the rough sea surface. It is found that the source level of 200 dB re 1 μPa at 1 m is adequate to satisfy the detectability of the warning sequence at distances up to 2 NM (≈3.7 km) within a horizontal sector of ±60° if realistic assumptions about signal-processing and noise are made. An arrangement to enlarge the angular coverage is discussed. PMID:24180764

  4. Femtosecond laser for glaucoma treatment: the comparison between simulation and experimentation results on ocular tissue removal

    NASA Astrophysics Data System (ADS)

    Hou, Dong Xia; Ngoi, Bryan K. A.; Hoh, Sek Tien; Koh, Lee Huat K.; Deng, Yuan Zi

    2005-04-01

    In ophthalmology, the use of femtosecond lasers is receiving more attention than ever due to its extremely high intensity and ultra short pulse duration. It opens the highly beneficial possibilities for minimized side effects during surgery process, and one of the specific areas is laser surgery in glaucoma treatment. However, the sophisticated femtosecond laser-ocular tissue interaction mechanism hampers the clinical application of femtosecond laser to treat glaucoma. The potential contribution in this work lies in the fact, that this is the first time a modified moving breakdown theory is applied, which is appropriate for femtosecond time scale, to analyze femtosecond laser-ocular tissue interaction mechanism. Based on this theory, energy deposition and corresponding thermal increase are studied by both simulation and experimentation. A simulation model was developed using Matlab software, and the simulation result was validated through in-vitro laser-tissue interaction experiment using pig iris. By comparing the theoretical and experimental results, it is shown that femtosecond laser can obtain determined ocular tissue removal, and the thermal damage is evidently reduced. This result provides a promising potential for femtosecond laser in glaucoma treatment.

  5. A Comparison of Experimental and Theoretical Results for Labyrinth Gas Seals. Ph.D. Thesis

    NASA Technical Reports Server (NTRS)

    Scharrer, Joseph Kirk

    1987-01-01

    The basic equations are derived for a two control volume model for compressible flow in a labyrinth seal. The flow is assumed to be completely turbulent and isoenergetic. The wall friction factors are determined using the Blasius formula. Jet flow theory is used for the calculation of the recirculation velocity in the cavity. Linearized zeroth and first order perturbation equations are developed for small motion about a centered position by an expansion in the eccentricity ratio. The zeroth order pressure distribution is found by satisfying the leakage equation. The circumferential velocity distribution is determined by satisfying the momentum equations. The first order equations are solved by a separation of variable solution. Integration of the resultant pressure distribution along and around the seal defines the reaction force developed by the seal and the corresponding dynamic coefficients. The results of this analysis are compared to experimental test results.

  6. Heavy vehicle suspension parameters identification and estimation of vertical forces: experimental results

    NASA Astrophysics Data System (ADS)

    Imine, H.; Madani, T.

    2015-02-01

    The aim of the present work is to estimate the vertical forces of heavy vehicle and identify the unknown dynamic parameters using sliding mode observer approach. This observation needs a good knowledge of dynamic parameters such as damping coefficient, spring stiffness, etc. In this paper, suspension stiffness and unsprung masses have been identified. Experimental results carried out on an instrumented tractor have been presented in order to show the quality of the state observation, parameters identification and force estimation. These estimation results are then compared to the measured one coming from the sensors installed in the tractor. Many scenarios have been tested. In this paper, the results coming from zigzag test have been shown and commented.

  7. Experimental results for a two-dimensional supersonic inlet used as a thrust deflecting nozzle

    NASA Technical Reports Server (NTRS)

    Johns, Albert L.; Burstadt, Paul L.

    1984-01-01

    Nearly all supersonic V/STOL aircraft concepts are dependent on the thrust deflecting capability of a nozzle. In one unique concept, referred to as the reverse flow dual fan, not only is there a thrust deflecting nozzle for the fan and core engine exit flow, but because of the way the propulsion system operates during vertical takeoff and landing, the supersonic inlet is also used as a thrust deflecting nozzle. This paper presents results of an experimental study to evaluate the performance of a supersonic inlet used as a thrust deflecting nozzle for this reverse flow dual fan concept. Results are presented in terms of nozzle thrust coefficient and thrust vector angle for a number of inlet/nozzle configurations. Flow visualization and nozzle exit flow survey results are also shown.

  8. Some results of an experimental study of the atmospheric aerosol in Tomsk: A combined approach

    SciTech Connect

    Zuev, V.V.

    1996-04-01

    As widely accepted, aerosols strongly contribute to the formation of the earth`s radiation balance through the absorption and scattering of solar radiation. In addition, aerosols, being active condensation nuclei, also have a role in the cloud formation process. In this paper, results are presented of aerosol studies undertaken at the field measurement sites of the Institute of Atmospheric Optics in Tomsk and the Tomsk region.

  9. Accuracy and Precision in the Southern Hemisphere Additional Ozonesondes (SHADOZ) Dataset in Light of the JOSIE-2000 Results

    NASA Technical Reports Server (NTRS)

    Witte, Jacquelyn C.; Thompson, Anne M.; Schmidlin, F. J.; Oltmans, S. J.; Smit, H. G. J.

    2004-01-01

    Since 1998 the Southern Hemisphere ADditional OZonesondes (SHADOZ) project has provided over 2000 ozone profiles over eleven southern hemisphere tropical and subtropical stations. Balloon-borne electrochemical concentration cell (ECC) ozonesondes are used to measure ozone. The data are archived at: &ttp://croc.gsfc.nasa.gov/shadoz>. In analysis of ozonesonde imprecision within the SHADOZ dataset, Thompson et al. [JGR, 108,8238,20031 we pointed out that variations in ozonesonde technique (sensor solution strength, instrument manufacturer, data processing) could lead to station-to-station biases within the SHADOZ dataset. Imprecisions and accuracy in the SHADOZ dataset are examined in light of new data. First, SHADOZ total ozone column amounts are compared to version 8 TOMS (2004 release). As for TOMS version 7, satellite total ozone is usually higher than the integrated column amount from the sounding. Discrepancies between the sonde and satellite datasets decline two percentage points on average, compared to version 7 TOMS offsets. Second, the SHADOZ station data are compared to results of chamber simulations (JOSE-2000, Juelich Ozonesonde Intercomparison Experiment) in which the various SHADOZ techniques were evaluated. The range of JOSE column deviations from a standard instrument (-10%) in the chamber resembles that of the SHADOZ station data. It appears that some systematic variations in the SHADOZ ozone record are accounted for by differences in solution strength, data processing and instrument type (manufacturer).

  10. MHD seawater thruster performance: A comparison of predictions with experimental results from a two Tesla test facility

    SciTech Connect

    Picologlou, B.F.; Doss, E.D.; Geyer, H.K. ); Sikes, W.C.; Ranellone, R.F. )

    1992-01-01

    A two Tesla test facility was designed, built, and operated to investigate the performance of magnetohydrodynamic (MHD) seawater thrusters. The results of this investigation are used to validate a design oriented MHD thruster performance computer code. The thruster performance code consists of a one-dimensional MHD hydrodynamic model coupled to a two-dimensional electrical model. The code includes major loss mechanisms affecting the performance of the thruster. Among these losses are the joule dissipation losses, frictional losses, electrical end losses, and single electrode potential losses. The facility test loop, its components, and their design are presented in detail. Additionally, the test matrix and its rationale are discussed. Representative experimental results of the test program are presented, and are compared to pretest computer model predictions. Good agreement between predicted and measured data has served to validate the thruster performance computer models.

  11. Fuel-rich, catalytic reaction experimental results. [fuel development for high-speed civil transport aircraft

    NASA Technical Reports Server (NTRS)

    Rollbuhler, Jim

    1991-01-01

    Future aeropropulsion gas turbine combustion requirements call for operating at very high inlet temperatures, pressures, and large temperature rises. At the same time, the combustion process is to have minimum pollution effects on the environment. Aircraft gas turbine engines utilize liquid hydrocarbon fuels which are difficult to uniformly atomize and mix with combustion air. An approach for minimizing fuel related problems is to transform the liquid fuel into gaseous form prior to the completion of the combustion process. Experimentally obtained results are presented for vaporizing and partially oxidizing a liquid hydrocarbon fuel into burnable gaseous components. The presented experimental data show that 1200 to 1300 K reaction product gas, rich in hydrogen, carbon monoxide, and light-end hydrocarbons, is formed when flowing 0.3 to 0.6 fuel to air mixes through a catalyst reactor. The reaction temperatures are kept low enough that nitrogen oxides and carbon particles (soot) do not form. Results are reported for tests using different catalyst types and configurations, mass flowrates, input temperatures, and fuel to air ratios.

  12. Transport of fluorobenzoate tracers in a vegetated hydrologic control volume: 1. Experimental results

    NASA Astrophysics Data System (ADS)

    Queloz, Pierre; Bertuzzo, Enrico; Carraro, Luca; Botter, Gianluca; Miglietta, Franco; Rao, P. S. C.; Rinaldo, Andrea

    2015-04-01

    This paper reports about the experimental evidence collected on the transport of five fluorobenzoate tracers injected under controlled conditions in a vegetated hydrologic volume, a large lysimeter (fitted with load cells, sampling ports, and an underground chamber) where two willows prompting large evapotranspiration fluxes had been grown. The relevance of the study lies in the direct and indirect measures of the ways in which hydrologic fluxes, in this case, evapotranspiration from the upper surface and discharge from the bottom drainage, sample water and solutes in storage at different times under variable hydrologic forcings. Methods involve the accurate control of hydrologic inputs and outputs and a large number of suitable chemical analyses of water samples in discharge waters. Mass extraction from biomass has also been performed ex post. The results of the 2 year long experiment established that our initial premises on the tracers' behavior, known to be sorption-free under saturated conditions which we verified in column leaching tests, were unsuitable as large differences in mass recovery appeared. Issues on reactivity thus arose and were addressed in the paper, in this case attributed to microbial degradation and solute plant uptake. Our results suggest previously unknown features of fluorobenzoate compounds as hydrologic tracers, potentially interesting for catchment studies owing to their suitability for distinguishable multiple injections, and an outlook on direct experimental closures of mass balance in hydrologic transport volumes involving fluxes that are likely to sample differently stored water and solutes.

  13. Comparison of experimental and analytical results for free vibration of laminated composite plates

    SciTech Connect

    Maryuama, Koichi; Narita, Yoshihiro; Ichinomiya, Osamu

    1995-11-01

    Fibrous composite materials are being increasingly employed in high performance structures, including pressured vessel and piping applications. These materials are usually used in the form of laminated flat or curved plates, and the understanding of natural frequencies and the corresponding mode shapes is essential to a reliable structural design. Although many references have been published on analytical study of laminated composite plates, a limited number of experimental studies have appeared for dealing with vibration characteristics of the plates. This paper presents both experimental and analytical results for the problems. In the experiment, the holographic interferometry is used to measure the resonant frequencies and corresponding mode shapes of six-layered CFRP (carbon fiber reinforced plastic) composite plates. The material constants of a lamina are calculated from fiber and matrix material constants by using some different composite rules. With the calculated constants, the natural frequencies of the laminated CFRP plates are theoretically determined by the Ritz method. From the comparison of two sets of the results, the effect of choosing different composite rules is discussed in the vibration study of laminated composite plates.

  14. Tilted wheel satellite attitude control with air-bearing table experimental results

    NASA Astrophysics Data System (ADS)

    Inumoh, Lawrence O.; Forshaw, Jason L.; Horri, Nadjim M.

    2015-12-01

    Gyroscopic actuators for satellite control have attracted significant research interest over the years, but their viability for the control of small satellites has only recently started to become clear. Research on variable speed gyroscopic actuators has long been focused on single gimbal actuators; double gimbal actuators typically operate at constant wheel spin rate and allow tilt angle ranges far larger than the ranges needed to operate most satellite missions. This research examines a tilted wheel, a newly proposed type of inertial actuator that can generate torques in all three principal axes of a rigid satellite using a spinning wheel and a double tilt mechanism. The tilt mechanism tilts the angular momentum vector about two axes providing two degree of freedom control, while variation of the wheel speed provides the third. The equations of motion of the system lead to a singularity-free system during nominal operation avoiding the need for complex steering logic. This paper describes the hardware design of the tilted wheel and the experimental setup behind both standalone and spherical air-bearing tables used to test it. Experimental results from the air bearing table are provided with the results depicting the high performance capabilities of the proposed actuator in torque generation.

  15. Experimental Impeller Fragmentation of Iliocaval Thrombosis Under Tulip Filter Protection: Preliminary Results

    SciTech Connect

    Schmitz-Rode, Thomas; Vorwerk, Dierk; Schuermann, Karl; Guenther, Rolf W.

    1996-04-15

    Purpose: To assess the efficacy of catheter fragmentation of massive caval thrombosis and of filter protection against procedure-related pulmonary embolism. Methods: In 10 sheep, a self-expanding tulip-shaped filter made from Wallstent mesh (diameter 25 mm) was introduced from the right jugular approach into the proximal inferior vena cava. Experimentally induced massive iliocaval thrombosis was fragmented by an impeller catheter (expanded diameter 14 mm), which was advanced coaxially through the sheath of the expanded filter. Post-procedural cavography and pulmonary angiography were performed to document the extent of caval recanalization and pulmonary embolism. Results: In all cases, impeller fragmentation cleared the inferior vena cava and the iliac veins of thrombi completely. Fragments washed downstream were trapped in the filter. In two of the first cases, parts of the clots caused pulmonary embolism before the filter was in place. Further events were avoided by a modification of the experimental setup. Except for some small peripheral perfusion defects in two cases, pulmonary angiograms did not show any incidence of pulmonary embolism. Conclusion: Our preliminary results suggest that impeller fragmentation of iliocaval thrombi under tulip filter protection is effective and does not cause significant pulmonary embolism.

  16. Natural frequencies of two bubbles in a compliant tube: Analytical, simulation, and experimental results

    PubMed Central

    Jang, Neo W.; Zakrzewski, Aaron; Rossi, Christina; Dalecki, Diane; Gracewski, Sheryl

    2011-01-01

    Motivated by various clinical applications of ultrasound contrast agents within blood vessels, the natural frequencies of two bubbles in a compliant tube are studied analytically, numerically, and experimentally. A lumped parameter model for a five degree of freedom system was developed, accounting for the compliance of the tube and coupled response of the two bubbles. The results were compared to those produced by two different simulation methods: (1) an axisymmetric coupled boundary element and finite element code previously used to investigate the response of a single bubble in a compliant tube and (2) finite element models developed in comsol Multiphysics. For the simplified case of two bubbles in a rigid tube, the lumped parameter model predicts two frequencies for in- and out-of-phase oscillations, in good agreement with both numerical simulation and experimental results. For two bubbles in a compliant tube, the lumped parameter model predicts four nonzero frequencies, each asymptotically converging to expected values in the rigid and compliant limits of the tube material. PMID:22088008

  17. Epistemology and expectations survey about experimental physics: Development and initial results

    NASA Astrophysics Data System (ADS)

    Zwickl, Benjamin M.; Hirokawa, Takako; Finkelstein, Noah; Lewandowski, H. J.

    2014-06-01

    In response to national calls to better align physics laboratory courses with the way physicists engage in research, we have developed an epistemology and expectations survey to assess how students perceive the nature of physics experiments in the contexts of laboratory courses and the professional research laboratory. The Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS) evaluates students' epistemology at the beginning and end of a semester. Students respond to paired questions about how they personally perceive doing experiments in laboratory courses and how they perceive an experimental physicist might respond regarding their research. Also, at the end of the semester, the E-CLASS assesses a third dimension of laboratory instruction, students' reflections on their course's expectations for earning a good grade. By basing survey statements on widely embraced learning goals and common critiques of teaching labs, the E-CLASS serves as an assessment tool for lab courses across the undergraduate curriculum and as a tool for physics education research. We present the development, evidence of validation, and initial formative assessment results from a sample that includes 45 classes at 20 institutions. We also discuss feedback from instructors and reflect on the challenges of large-scale online administration and distribution of results.

  18. Experimental and raytrace results for throat-to-throat compound parabolic concentrators

    NASA Technical Reports Server (NTRS)

    Leviton, D. B.; Leitch, J. W.

    1986-01-01

    Compound parabolic concentrators are nonimaging cone-shaped optics with useful angular transmission characteristics. Two cones used throat-to-throat accept radiant flux within one well-defined acceptance angle and redistribute it into another. If the entrance cone is fed with Lambertian flux, the exit cone produces a beam whose half-angle is the exit cone's acceptance angle and whose cross section shows uniform irradiance from near the exit mouth to infinity. (The pair is a beam angle transformer). The design of one pair of cones is discussed, also an experiment to map the irradiance of the emergent beam, and a raytracing program which models the cones fed by Lambertian flux. Experimental results compare favorably with raytrace results.

  19. Experimental Results for a Flapped Natural-laminar-flow Airfoil with High Lift/drag Ratio

    NASA Technical Reports Server (NTRS)

    Mcghee, R. J.; Viken, J. K.; Pfenninger, W.; Beasley, W. D.; Harvey, W. D.

    1984-01-01

    Experimental results have been obtained for a flapped natural-laminar-flow airfoil, NLF(1)-0414F, in the Langley Low-Turbulence Pressure Tunnel. The tests were conducted over a Mach number range from 0.05 to 0.40 and a chord Reynolds number range from about 3.0 x 10(6) to 22.0 x 10(6). The airfoil was designed for 0.70 chord laminar flow on both surfaces at a lift coefficient of 0.40, a Reynolds number of 10.0 x 10(6), and a Mach number of 0.40. A 0.125 chord simple flap was incorporated in the design to increase the low-drag, lift-coefficient range. Results were also obtained for a 0.20 chord split-flap deflected 60 deg.

  20. The Langley Research Center CSI phase-0 evolutionary model testbed-design and experimental results

    NASA Technical Reports Server (NTRS)

    Belvin, W. K.; Horta, Lucas G.; Elliott, K. B.

    1991-01-01

    A testbed for the development of Controls Structures Interaction (CSI) technology is described. The design philosophy, capabilities, and early experimental results are presented to introduce some of the ongoing CSI research at NASA-Langley. The testbed, referred to as the Phase 0 version of the CSI Evolutionary model (CEM), is the first stage of model complexity designed to show the benefits of CSI technology and to identify weaknesses in current capabilities. Early closed loop test results have shown non-model based controllers can provide an order of magnitude increase in damping in the first few flexible vibration modes. Model based controllers for higher performance will need to be robust to model uncertainty as verified by System ID tests. Data are presented that show finite element model predictions of frequency differ from those obtained from tests. Plans are also presented for evolution of the CEM to study integrated controller and structure design as well as multiple payload dynamics.

  1. Non-Shock Initiation of the Plastic Bonded Explosive PBXN-5: Experimental Results

    NASA Astrophysics Data System (ADS)

    Lappo, K. N.; Todd, S. N.; Anderson, M. U.; Vogler, T. J.

    2007-12-01

    The plastic bonded explosive PBXN-5 was studied under impulsive loading experiments to relate impact-induced mechanical damage to the onset of, and the extent of reaction produced. A small diameter projectile generated shock and release conditions at the impact interface, on the microsecond time scale during the initial portion of the impulsive loading. These shock and release wave interactions generate significant damage, resulting in a porous, powder compaction-type initiation behavior. Experimental measurements show an energy threshold for initiation of reaction which relates to impact-induced kinetic energy. These results are implemented in the model development and validation phases of the damage-induced reaction (DMGIR) model, which is used to simulate impact scenarios of explosives, explosive components, and explosive systems.

  2. A three-phase series-parallel resonant converter -- analysis, design, simulation, and experimental results

    SciTech Connect

    Bhat, A.K.S.; Zheng, R.L.

    1996-07-01

    A three-phase dc-to-dc series-parallel resonant converter is proposed /and its operating modes for a 180{degree} wide gating pulse scheme are explained. A detailed analysis of the converter using a constant current model and the Fourier series approach is presented. Based on the analysis, design curves are obtained and a design example of a 1-kW converter is given. SPICE simulation results for the designed converter and experimental results for a 500-W converter are presented to verify the performance of the proposed converter for varying load conditions. The converter operates in lagging power factor (PF) mode for the entire load range and requires a narrow variation in switching frequency, to adequately regulate the output power.

  3. Comparison of results of experimental research with numerical calculations of a model one-sided seal

    NASA Astrophysics Data System (ADS)

    Joachimiak, Damian; Krzyślak, Piotr

    2015-06-01

    Paper presents the results of experimental and numerical research of a model segment of a labyrinth seal for a different wear level. The analysis covers the extent of leakage and distribution of static pressure in the seal chambers and the planes upstream and downstream of the segment. The measurement data have been compared with the results of numerical calculations obtained using commercial software. Based on the flow conditions occurring in the area subjected to calculations, the size of the mesh defined by parameter y+ has been analyzed and the selection of the turbulence model has been described. The numerical calculations were based on the measurable thermodynamic parameters in the seal segments of steam turbines. The work contains a comparison of the mass flow and distribution of static pressure in the seal chambers obtained during the measurement and calculated numerically in a model segment of the seal of different level of wear.

  4. Fault detection, isolation and reconfiguration in FTMP Methods and experimental results. [fault tolerant multiprocessor

    NASA Technical Reports Server (NTRS)

    Lala, J. H.

    1983-01-01

    The Fault-Tolerant Multiprocessor (FTMP) is a highly reliable computer designed to meet a goal of 10 to the -10th failures per hour and built with the objective of flying an active-control transport aircraft. Fault detection, identification, and recovery software is described, and experimental results obtained by injecting faults in the pin level in the FTMP are presented. Over 21,000 faults were injected in the CPU, memory, bus interface circuits, and error detection, masking, and error reporting circuits of one LRU of the multiprocessor. Detection, isolation, and reconfiguration times were recorded for each fault, and the results were found to agree well with earlier assumptions made in reliability modeling.

  5. Experimental results on the design for the APS PID global orbit control system.

    SciTech Connect

    Chung, Y.; Kirchman, J. A.

    1997-12-05

    The Advanced Photon Source third generation synchrotrons light source needs a stabilized particle beam position to produce high brightness and low emittance radiation. Global orbit correction control is introduced and is utilized to satisfy the demanding needs of the accelerator. This paper presents the experimental results for determining an effective and optimal controller to meet the global orbit correction requirements. These requirements include frequency/time domain demands consisting of vibrational noise attenuation, limiting of controller gains for stability and improving the system time response. Experiments were conducted with a digital signal processor implementing various PID sets to make comparisons between simulations and experiments. Measurements at these PID sets supported the results of software simulation.

  6. Preliminary results of the large experimental wind turbine phase of the national wind energy program

    NASA Technical Reports Server (NTRS)

    Thomas, R. L.; Sholes, J. E.

    1975-01-01

    A major phase of the wind energy program is the development of reliable wind turbines for supplying cost-competitive electrical energy. This paper discusses the preliminary results of two projects in this phase of the program. First an experimental 100 kW wind turbine design and its status are reviewed. Also discussed are the results of two parallel design studies for determining the configurations and power levels for wind turbines with minimum energy costs. These studies show wind energy costs of 7 to 1.5 c/kWH for wind turbines produced in quantities of 100 to 1000 a year and located at sites having average winds of 12 to 18 mph.

  7. Survey of Experimental Results in High-Contrast Imaging for Future Exoplanet Missions

    NASA Technical Reports Server (NTRS)

    Lawson, P. R.; Belikov, R.; Cash, W.; Clampin, M.; Glassman, T.; Guyon, O.; Kasdin, N. J.; Kern, B. D.; Lyon, R.; Mawet, D.; Moody, D.; Samuele, R.; Serabyn, E.; Sirbu, D.; Trauger, J.

    2013-01-01

    We present and compare experimental results in high contrast imaging representing the state of the art in coronagraph and starshade technology. These experiments have been undertaken with the goal of demonstrating the capability of detecting Earth-like planets around nearby Sun-like stars. The contrast of an Earth seen in reflected light around a Sun-like star would be about 1.2 x 10(exp -10). Several of the current candidate technologies now yield raw contrasts of 1.0 x 10(exp -9) or better, and so should enable the detection of Earths, assuming a gain in sensitivity in post-processing of a factor of 10. We present results of coronagraph and starshade experiments conducted at visible and infrared wavelengths. Cross-sections of dark fields are directly compared as a function of field angle and bandwidth. The strength and differences of the techniques are compared.

  8. Interfacial Chemical Interactions in the (Alumina/Graphite/Al Alloys) System: Thermodynamic Modeling and Experimental Results

    NASA Astrophysics Data System (ADS)

    Gelbstein, M.; Edry, I.; Froumin, N.; Frage, N.

    2009-04-01

    The stability of alumina-coated graphite couples in liquid Al is investigated in the 1373 to 1573 K temperature range. A thermodynamic model was carried out to determine the mechanisms controlling the couple stability and the effect of alloying Al with high melting point element for instance U (up to 3 at. pct). It was established that the dissolved uranium dose not play any role in the interfacial interactions and that the couple stability is governed by the interactions with Al resulting in the release of gaseous products. The experiments focused on wetting kinetics under conditions allowing for an in-situ reduction of the alumina coating by the liquid Al. The experimental results confirm the predictions of the thermodynamic analysis.

  9. Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation

    SciTech Connect

    Innocenzi, V. De Michelis, I.; Ferella, F.; Vegliò, F.

    2013-11-15

    Highlights: • Fluorescent powder of lamps. • Fluorescent powder of cathode ray rubes. • Recovery of yttrium from fluorescent powders. • Economic simulation for the processes to recover yttrium from WEEE. - Abstract: In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

  10. A Review of Out-of-School Time Program Quasi-Experimental and Experimental Evaluation Results. Out-of-School Time Evaluation Snapshot.

    ERIC Educational Resources Information Center

    Little, Priscilla M. D.; Harris, Erin

    As the amount of resources allocated to out-of-school (OST) programming and policymakers' demands for research-based results increase, there is increasing interest in rigorous research designs to examine OST program outcomes. This issue of "Out-of-School Time Evaluation Snapshots" reviews 27 quasi-experimental and experimental OST evaluations and…

  11. Electrochromism of W-oxide-based films: Some theoretical and experimental results

    SciTech Connect

    Azens, A.; Hjelm, A.; Bellac, D. Le; Granqvist, C.G.; Barczynska, J.; Pentjuss, E.; Gabrusenoks, J.; Wills, J.M.

    1995-12-31

    Electrochromic thin films are of much interest in contemporary and emerging technology, where they can be used for regulating the throughput of radiant energy in ``smart windows``. The authors survey some recent work related to electrochromic W-oxide-based thin films. The electronic structure of cubic (perovskite) WO{sub 3} and HWO{sub 3} was calculated from first principles. It was found, among other things, that hydroxide formation was energetically favored. Experimental studies were made on films prepared by reactive magnetron sputtering in Ar + O{sub 2} with and without CF{sub 4} addition and substrate bias. Structural studies by atomic force microscopy, X-ray diffraction, infrared reflectance spectroscopy, and Raman spectroscopy indicated that the electron bombardment associated with a positive substrate bias led to grain growth and partial crystallization while maintaining a high density of W{double_bond}O double bonds presumably on internal surfaces. Electrochemical and spectrophotometric measurements demonstrated, in particular, that tandem films -- with a thin protective layer of electron bombarded oxide covering a thicker oxyfluoride layer -- were able to combine rapid dynamics of the electrochromism with good durability. Oblique angle sputtering in Ar + O{sub 2} gave films whose microstructure comprised inclined columns, as seen from scanning electron microscopy. Pronounced angular selective transmittance was found to coexist with electrochromism.

  12. Modeling and experimental results for condensing supercritical CO2 power cycles.

    SciTech Connect

    Wright, Steven Alan; Conboy, Thomas M.; Radel, Ross F.; Rochau, Gary Eugene

    2011-01-01

    This Sandia supported research project evaluated the potential improvement that 'condensing' supercritical carbon dioxide (S-CO{sub 2}) power cycles can have on the efficiency of Light Water Reactors (LWR). The analytical portion of research project identified that a S-CO{sub 2} 'condensing' re-compression power cycle with multiple stages of reheat can increase LWR power conversion efficiency from 33-34% to 37-39%. The experimental portion of the project used Sandia's S-CO{sub 2} research loop to show that the as designed radial compressor could 'pump' liquid CO{sub 2} and that the gas-cooler's could 'condense' CO{sub 2} even though both of these S-CO{sub 2} components were designed to operate on vapor phase S-CO{sub 2} near the critical point. There is potentially very high value to this research as it opens the possibility of increasing LWR power cycle efficiency, above the 33-34% range, while lowering the capital cost of the power plant because of the small size of the S-CO{sub 2} power system. In addition it provides a way to incrementally build advanced LWRs that are optimally designed to couple to S-CO{sub 2} power conversion systems to increase the power cycle efficiency to near 40%.

  13. First experimental results of motion mitigation by continuous line scanning of protons.

    PubMed

    Schätti, A; Meer, D; Lomax, A J

    2014-10-01

    Mitigation of organ motion in active, scanning proton therapy is a challenge. One of the easiest methods to implement is re-scanning, where a treatment plan is applied several times with accordingly smaller weights. As a consequence, motion effects are averaged out. For discrete spot scanning, a major drawback of this method is the treatment time, which increases linearly with the number of re-scans. Continuous line scanning, on the other hand, eliminates the dead time between the positioning of each beam, and in this work, continuous line scanning has been investigated experimentally from the point of view of dose, penumbral width and its effectiveness for re-scanning. As shown by measurements in a homogeneous phantom, dose distributions delivered by continuous line scanning were comparable with those of discrete spot scanning for both geometric and realistic targets, with only a modest degradation of lateral penumbra in the direction of scanning. In addition, delivered dose levels have also been found to agree well between discrete and line scanning. With continuous line scanning, however, more re-scans could be applied without the artefacts seen in discrete spot scanning, with motions of up to 1 cm peak-to-peak amplitude being mitigated by 10 re-scans. For larger motion, in the interest of reducing the volume of irradiated normal tissue re-scanning should be combined with other motion mitigation techniques such as gating or breath-hold. PMID:25197938

  14. First experimental results of motion mitigation by continuous line scanning of protons

    NASA Astrophysics Data System (ADS)

    Schätti, A.; Meer, D.; Lomax, A. J.

    2014-10-01

    Mitigation of organ motion in active, scanning proton therapy is a challenge. One of the easiest methods to implement is re-scanning, where a treatment plan is applied several times with accordingly smaller weights. As a consequence, motion effects are averaged out. For discrete spot scanning, a major drawback of this method is the treatment time, which increases linearly with the number of re-scans. Continuous line scanning, on the other hand, eliminates the dead time between the positioning of each beam, and in this work, continuous line scanning has been investigated experimentally from the point of view of dose, penumbral width and its effectiveness for re-scanning. As shown by measurements in a homogeneous phantom, dose distributions delivered by continuous line scanning were comparable with those of discrete spot scanning for both geometric and realistic targets, with only a modest degradation of lateral penumbra in the direction of scanning. In addition, delivered dose levels have also been found to agree well between discrete and line scanning. With continuous line scanning, however, more re-scans could be applied without the artefacts seen in discrete spot scanning, with motions of up to 1 cm peak-to-peak amplitude being mitigated by 10 re-scans. For larger motion, in the interest of reducing the volume of irradiated normal tissue re-scanning should be combined with other motion mitigation techniques such as gating or breath-hold.

  15. EASE (Experimental Assembly of Structures in EVA) overview of selected results

    NASA Technical Reports Server (NTRS)

    Akin, David L.

    1987-01-01

    Experimental Assembly of Structures in EVA (EASE) objectives, experimental protocol, neutral buoyancy simulation, task time distribution, assembly task performance, metabolic rate/biomedical readouts are summarized. This presentation is shown in charts, figures, and graphs.

  16. Copper Content in Synthetic Copper Carbonate: A Statistical Comparison of Experimental and Expected Results

    NASA Astrophysics Data System (ADS)

    Sheeran, Daniel

    1998-04-01

    This paper describes a general chemistry experiment which was implemented in the 1995-96 academic year and which is based on the preparation of a basic copper(II) carbonate, Cu(OH)2(CO3), and its analysis for copper. Individual results of the copper determination were compiled and a class mean and standard deviation were computed and a frequency plot was constructed for the purpose of comparing class results to the expected result. From a student perspective, the expected result was not Cu(OH)2(CO3), rather it was CuCO3. Students were unaware that they prepared a basic salt, and assumed they prepared CuCO3. This assumption originates in the synthesis which has the appearance of a double displacement reaction. Students expected the copper determination to verify this assumption and were quite surprised when it did not. Statistics was used to reveal the discrepancy between experimental and expected results, and a t-test established that this discrepancy was significant--the prepared material cannot be formulated as CuCO3. The statistical conclusion was further substantiated by observational evidence in the synthesis and analysis steps.

  17. Smectite clays in Mars soil - Evidence for their presence and role in Viking biology experimental results

    NASA Technical Reports Server (NTRS)

    Banin, A.; Rishpon, J.

    1979-01-01

    Evidence for the presence of smectite clays in Martian soils is reviewed and results of experiments with certain active clays simulating the Viking biology experiments are reported. Analyses of Martian soil composition by means of X-ray fluorescence spectrometry and dust storm spectroscopy and Martian geological history strongly suggest the presence of a mixture of weathered ferro-silicate minerals, mainly nontronite and montmorillonite, accompanied by soluble sulphate salts, as major constituents. Samples of montmorillonite and nontronite incubated with (C-14)-formate or the radioactive nutrient medium solution used in the Viking Labeled Release experiment, were found to produce patterns of release of radioactive gas very similar to those observed in the Viking experiments, indicating the iron-catalyzed decomposition of formate as the reaction responsible for the Viking results. The experimental results of Hubbard (1979) simulating the results of the Viking Pyrolytic Release experiment using iron montmorillonites are pointed out, and it is concluded that many of the results of the Viking biology experiments can be explained in terms of the surface activity of smectite clays in catalysis and adsorption.

  18. Induced current electrical impedance tomography system: experimental results and numerical simulations.

    PubMed

    Zlochiver, Sharon; Radai, M Michal; Abboud, Shimon; Rosenfeld, Moshe; Dong, Xiu-Zhen; Liu, Rui-Gang; You, Fu-Sheng; Xiang, Hai-Yan; Shi, Xue-Tao

    2004-02-01

    In electrical impedance tomography (EIT), measurements of developed surface potentials due to applied currents are used for the reconstruction of the conductivity distribution. Practical implementation of EIT systems is known to be problematic due to the high sensitivity to noise of such systems, leading to a poor imaging quality. In the present study, the performance of an induced current EIT (ICEIT) system, where eddy current is applied using magnetic induction, was studied by comparing the voltage measurements to simulated data, and examining the imaging quality with respect to simulated reconstructions for several phantom configurations. A 3-coil, 32-electrode ICEIT system was built, and an iterative modified Newton-Raphson algorithm was developed for the solution of the inverse problem. The RMS norm between the simulated and the experimental voltages was found to be 0.08 +/- 0.05 mV (<3%). Two regularization methods were implemented and compared: the Marquardt regularization and the Laplacian regularization (a bounded second-derivative regularization). While the Laplacian regularization method was found to be preferred for simulated data, it resulted in distinctive spatial artifacts for measured data. The experimental reconstructed images were found to be indicative of the angular positioning of the conductivity perturbations, though the radial sensitivity was low, especially when using the Marquardt regularization method. PMID:15005319

  19. Experimental Estimation Of Energy Damping During Free Rocking Of Unreinforced Masonry Walls. First Results

    SciTech Connect

    Sorrentino, Luigi; Masiani, Renato; Benedetti, Stefano

    2008-07-08

    This paper presents an ongoing experimental program on unreinforced masonry walls undergoing free rocking. Aim of the laboratory campaign is the estimation of kinetic energy damping exhibited by walls released with non-zero initial conditions of motion. Such energy damping is necessary for dynamic modelling of unreinforced masonry local mechanisms. After a brief review of the literature on this topic, the main features of the laboratory tests are presented. The program involves the experimental investigation of several parameters: 1) unit material (brick or tuff), 2) wall aspect ratio (ranging between 14.5 and 7.1), 3) restraint condition (two-sided or one-sided rocking), and 4) depth of the contact surface between facade and transverse walls (one-sided rocking only). All walls are single wythe and the mortar is pozzuolanic. The campaign is still in progress. However, it is possible to present the results on most of the mechanical properties of mortar and bricks. Moreover, a few time histories are reported, already indicating the need to correct some of the assumptions frequent in the literature.

  20. Experimental results and modeling tests of an adsorptive air-conditioning unit

    SciTech Connect

    Guilleminot, J.J.; Poyelle, F.; Meunier, F.

    1998-10-01

    Experimental tests have been performed on a zeolite-water adsorptive system suitable for air conditioning and consisting of two adsorbers filled with a consolidated composite made of zeolite mixed with a highly conductive matrix. This paper describes the experimental results of such a heat pump unit operating with a heat and mass recovery cycle. An important enhancement of the specific cooling power (SCP) has been achieved. At evaporating temperature T = 4 C, mass transfer resistance controls the process and limits the expected COP. Tests carried out at higher evaporating pressure make it possible to achieve the predicted COP and SCP. A predictive model developed and validated elsewhere in order to describe the temperature evolution of components and the heat and mass transfer in the adsorbers explains the mass transfer resistance in the adsorbent. Last, a new highly conductive adsorbent composite with good mass transfer properties is developed. The model is used to predict the performances of this new material. Very good SCP and COP can be achieved.

  1. Experimental results of flooding experiments in an inclined tube with liquid nitrogen and its vapor

    NASA Astrophysics Data System (ADS)

    Chen, Jianye; Xu, Lu; Xiong, Wei; Qiu, Limin; Zhang, Xiaobin

    2014-07-01

    Counter-current two-phase flow behaviors of saturated liquid nitrogen and its vapor at the onset of flooding are experimentally investigated. The experiments are carried out in a vacuum-insulated 20 mm i.d. transparent tube with the inclination angles of 30°, 45° and 60° corresponding to the horizontal. The common slug flow phenomenon happened with water-air is not observed with liquid nitrogen-vapor, instead, the big interfacial wave is found to be crushed to tiny droplets. The phenomenal difference is primarily attributed to the larger viscosity of water than liquid nitrogen. Correspondingly, the sharp rise of pressure drop with water-air is largely due to the blockage of gas flow by the formed slug, while it is primarily due to the tiny droplet entrainment for the liquid nitrogen-vapor pairs. The effects of inclination angles on the incipient flooding velocity are specially emphasized and investigated. A new correlation base on Ohnesorge number and modified Froude number are presented, and the results coincide with the experimental data of both room-temperature and cryogenic fluids with the uncertainty of 20%.

  2. Comparison between Theoretical Calculation and Experimental Results of Excitation Functions for Production of Relevant Biomedical Radionuclides

    NASA Astrophysics Data System (ADS)

    Menapace, E.; Birattari, C.; Bonardi, M. L.; Groppi, F.; Morzenti, S.; Zona, C.

    2005-05-01

    The radionuclide production for biomedical applications has been brought up in the years, as a special nuclear application, at INFN LASA Laboratory, particularly in co-operation with the JRC-Ispra of EC. Mainly scientific aspects concerning radiation detection and the relevant instruments, the measurements of excitation functions of the involved nuclear reactions, the requested radiochemistry studies and further applications have been investigated. On the side of the nuclear data evaluations, based on nuclear model calculations and critically selected experimental data, the appropriate competence has been developed at ENEA Division for Advanced Physics Technologies. A series of high specific activity accelerator-produced radionuclides in no-carrier-added (NCA) form, for uses in metabolic radiotherapy and for PET radiodiagnostics, are investigated. In this work, last revised measurements and model calculations are reviewed for excitation functions of natZn(d,X)64Cu, 66Ga reactions, referring to irradiation experiments at K=38 variable energy Cyclotron of JRC-Ispra. Concerning the reaction data for producing 186gRe and 211At/211gPo (including significant emission spectra) and 210At, most recent and critically selected experimental results are considered and discussed in comparison with model calculations paying special care to pre-equilibrium effects estimate and to the appropriate overall parameterization. Model calculations are presented for 226Ra(p,2n)225Ac reaction, according to the working program of the ongoing IAEA CRP on the matter.

  3. Frequency-dependent seismic attenuation in shales: experimental results and theoretical analysis

    NASA Astrophysics Data System (ADS)

    Delle Piane, Claudio; Sarout, Joel; Madonna, Claudio; Saenger, Erik H.; Dewhurst, David N.; Raven, Mark

    2014-07-01

    Samples of shales from the Ordovician Bongabinni and Goldwyer source rock formations were recovered from the Canning Basin (Western Australia). Attenuation was experimentally measured on preserved plugs from these formations in the frequency range between 10-2 and 102 Hz. Samples cored with different orientations with respect to the sedimentary bedding were prepared and tested in their native saturated state and after drying in the oven at 105 °C for 24 hr to assess the effect of fluids and of the sediment anisotropy on attenuation. To aid the interpretation of the experimental results, the clay-rich samples were characterized in terms of mineralogy, water content, porosity, permeability and microstructure. The two shales have significantly different quality factors; and this is seen to be dependent on both the saturation state of the samples and the propagation direction of the oscillatory signal. The attenuation coefficient for compression/extension parallel to bedding is less than that vertical to bedding in both the preserved and partially dehydrated situations. No frequency dependency is observed in the preserved samples within the range of frequencies explored in this study. On the other hand partially saturated samples show peaks in attenuation at around 40 Hz when the stress perturbation is transmitted normal to the macroscopic bedding. The interpretation of the attenuation measurements in terms of well-established theoretical models is discussed in view of the physical characteristics and microstructure of the tested rocks.

  4. Comparison between Theoretical Calculation and Experimental Results of Excitation Functions for Production of Relevant Biomedical Radionuclides

    SciTech Connect

    Menapace, E.; Birattari, C.; Bonardi, M.L.; Groppi, F.; Morzenti, S.; Zona, C.

    2005-05-24

    The radionuclide production for biomedical applications has been brought up in the years, as a special nuclear application, at INFN LASA Laboratory, particularly in co-operation with the JRC-Ispra of EC. Mainly scientific aspects concerning radiation detection and the relevant instruments, the measurements of excitation functions of the involved nuclear reactions, the requested radiochemistry studies and further applications have been investigated. On the side of the nuclear data evaluations, based on nuclear model calculations and critically selected experimental data, the appropriate competence has been developed at ENEA Division for Advanced Physics Technologies. A series of high specific activity accelerator-produced radionuclides in no-carrier-added (NCA) form, for uses in metabolic radiotherapy and for PET radiodiagnostics, are investigated. In this work, last revised measurements and model calculations are reviewed for excitation functions of natZn(d,X)64Cu, 66Ga reactions, referring to irradiation experiments at K=38 variable energy Cyclotron of JRC-Ispra. Concerning the reaction data for producing 186gRe and 211At/211gPo (including significant emission spectra) and 210At, most recent and critically selected experimental results are considered and discussed in comparison with model calculations paying special care to pre-equilibrium effects estimate and to the appropriate overall parameterization. Model calculations are presented for 226Ra(p,2n)225Ac reaction, according to the working program of the ongoing IAEA CRP on the matter.

  5. Structural and vibrational study of graphene oxide via coronene based models: theoretical and experimental results

    NASA Astrophysics Data System (ADS)

    Almeida de Mendonça, João Paulo; Henrique de Lima, Alessandro; Amaral Junqueira, Georgia Maria; Gianini Quirino, Welber; Legnani, Cristiano; Oliveira Maciel, Indhira; Sato, Fernando

    2016-05-01

    We use the Coronene (C24H12), a simple and finite molecule, to make a model to study the spectroscopic and structural alterations generated by oxygenated groups in graphene oxide (GO). Based on the Lerf–Klinowski model, we chose the hydroxyl [OH‑], the carboxyl [COOH‑] and the epoxy [the ring C2O inside the molecule] as our radicals of interest and study their collective and isolated effects. We perform geometry optimization, vibrational IR (via AM1 and DFT-B3LYP) and Raman spectra (via DFT-B3LYP) of a series of functionalized coronene molecules. As results, we obtain some useful data for the analysis of IR and Raman spectra of GO, which facilitate the understanding and identification of the peaks found in the experiment. Finally, we suggest a new model to study GO, producing an accurate signature when compared to our experimental data. Such molecule shows in more details of the structural effects caused by functionalization when compared to experimental data.

  6. Experimental Results from the Thermal Energy Storage-1 (TES-1) Flight Experiment

    NASA Technical Reports Server (NTRS)

    Wald, Lawrence W.; Tolbert, Carol; Jacqmin, David

    1995-01-01

    The Thermal Energy Storage-1 (TES-1) is a flight experiment that flew on the Space Shuttle Columbia (STS-62), in March 1994, as part of the OAST-2 mission. TES-1 is the first experiment in a four experiment suite designed to provide data for understanding the long duration microgravity behavior of thermal energy storage fluoride salts that undergo repeated melting and freezing. Such data have never been obtained before and have direct application for the development of space-based solar dynamic (SD) power systems. These power systems will store solar energy in a thermal energy salt such as lithium fluoride or calcium fluoride. The stored energy is extracted during the shade portion of the orbit. This enables the solar dynamic power system to provide constant electrical power over the entire orbit. Analytical computer codes have been developed for predicting performance of a spaced-based solar dynamic power system. Experimental verification of the analytical predictions is needed prior to using the analytical results for future space power design applications. The four TES flight experiments will be used to obtain the needed experimental data. This paper will focus on the flight results from the first experiment, TES-1, in comparison to the predicted results from the Thermal Energy Storage Simulation (TESSIM) analytical computer code. The TES-1 conceptual development, hardware design, final development, and system verification testing were accomplished at the NASA lewis Research Center (LeRC). TES-1 was developed under the In-Space Technology Experiment Program (IN-STEP), which sponsors NASA, industry, and university flight experiments designed to enable and enhance space flight technology. The IN-STEP Program is sponsored by the Office of Space Access and Technology (OSAT).

  7. Drying in porous media with gravity-stabilized fronts: experimental results.

    PubMed

    Yiotis, A G; Salin, D; Tajer, E S; Yortsos, Y C

    2012-08-01

    In a recent paper [Yiotis et al., Phys. Rev. E 85, 046308 (2012)] we developed a model for the drying of porous media in the presence of gravity. It incorporated effects of corner film flow, internal and external mass transfer, and the effect of gravity. Analytical results were derived when gravity opposes drying and hence leads to a stable percolation drying front. In this paper, we test the theory using laboratory experiments. A series of isothermal drying experiments in glass bead packings saturated with volatile hydrocarbons is conducted. The transparent glass cells containing the packing allow for the visual monitoring of the phase distribution patterns below the surface, including the formation of liquid films, as the gaseous phase invades the pore space, and for the control of the thickness of the diffusive mass boundary layer over the packing. The experimental results agree very well with theory, provided that the latter is generalized to account for the effects of corner roundness in the film region (which was neglected in the theoretical part). We demonstrate the existence of an early constant rate period (CRP), which lasts as long as the films saturate the surface of the packing, and of a subsequent falling rate period (FRP), which begins practically after the detachment of the film tips from the external surface. During the CRP, the process is controlled by diffusion within the stagnant gaseous phase in the upper part of the cells, yielding a Stefan tube problem solution. During the FRP, the process is controlled by diffusion within the packing, with a drying rate inversely proportional to the observed position of the film tips in the cell. Theoretical and experimental results compare favorably for a specific value of the roundness of the films, which is found to be constant and equal to 0.2 for various conditions, and verify the theoretical dependence on the capillary Ca(f), Bond Bo, and Sherwood Sh numbers. PMID:23005857

  8. Immiscible liquid-liquid pressure-driven flow in capillary tubes: Experimental results and numerical comparison

    NASA Astrophysics Data System (ADS)

    Soares, Edson J.; Thompson, Roney L.; Niero, Debora C.

    2015-08-01

    The immiscible displacement of one viscous liquid by another in a capillary tube is experimentally and numerically analyzed in the low inertia regime with negligible buoyancy effects. The dimensionless numbers that govern the problem are the capillary number Ca and the viscosity ratio of the displaced to the displacing fluids Nμ. In general, there are two output quantities of interest. One is associated to the relation between the front velocity, Ub, and the mean velocity of the displaced fluid, U ¯ 2 . The other is the layer thickness of the displaced fluid that remains attached to the wall. We compute these quantities as mass fractions in order to make them able to be compared. In this connection, the efficiency mass fraction, me, is defined as the complement of the mass fraction of the displaced fluid that leaves the tube while the displacing fluid crosses its length. The geometric mass fraction, mg, is defined as the fraction of the volume of the layer that remains attached to the wall. Because in gas-liquid displacement, these two quantities coincide, it is not uncommon in the literature to use mg as a measure of the displacement efficiency for liquid-liquid displacements. However, as is shown in the present paper, these two quantities have opposite tendencies when we increase the viscosity of the displacing fluid, making this distinction a crucial aspect of the problem. Results from a Galerkin finite element approach are also presented in order to make a comparison. Experimental and numerical results show that while the displacement efficiency decreases, the geometrical fraction increases when the viscosity ratio decreases. This fact leads to different decisions depending on the quantity to be optimized. The quantitative agreement between the numerical and experimental results was not completely achieved, especially for intermediate values of Ca. The reasons for that are still under investigation. The experiments conducted were able to achieve a wide range

  9. Implementation and experimental results of 4D tumor tracking using robotic couch

    SciTech Connect

    Buzurovic, I.; Yu, Y.; Werner-Wasik, M.; Biswas, T.; Anne, P. R.; Dicker, A. P.; Podder, T. K.

    2012-11-15

    Purpose: This study presents the implementation and experimental results of a novel technique for 4D tumor tracking using a commercially available and commonly used treatment couch and evaluates the tumor tracking accuracy in clinical settings. Methods: Commercially available couch is capable of positioning the patient accurately; however, currently there is no provision for compensating physiological movement using the treatment couch in real-time. In this paper, a real-time couch tracking control technique is presented together with experimental results in tumor motion compensation in four dimensions (superior-inferior, lateral, anterior-posterior, and time). To implement real-time couch motion for tracking, a novel control system for the treatment couch was developed. The primary functional requirements for this novel technique were: (a) the treatment couch should maintain all previous/normal features for patient setup and positioning, (b) the new control system should be used as a parallel system when tumor tracking would be deployed, and (c) tracking could be performed in a single direction and/or concurrently in all three directions of the couch motion (longitudinal, lateral, and vertical). To the authors' best knowledge, the implementation of such technique to a regular treatment couch for tumor tracking has not been reported so far. To evaluate the performance of the tracking couch, we investigated the mechanical characteristics of the system such as system positioning resolution, repeatability, accuracy, and tracking performance. Performance of the tracking system was evaluated using dosimetric test as an endpoint. To investigate the accuracy of real-time tracking in the clinical setting, the existing clinical treatment couch was replaced with our experimental couch and the linear accelerator was used to deliver 3D conformal radiation therapy (3D-CRT) and intensity modulated radiation therapy (IMRT) treatment plans with and without tracking. The results of

  10. Motion effects on an IFR hovering task: Analytical predictions and experimental results

    NASA Technical Reports Server (NTRS)

    Ringland, R. F.; Stapleford, R. L.; Magdaleno, R. E.

    1971-01-01

    An analytical pilot model incorporating the effects of motion cues and display scanning and sampling is tested by comparing predictions against experimental results on a moving base simulator. The simulated task is that of precision hovering of a VTOL having varying amounts of rate damping, and using separated instrument displays. Motion cue effects are investigated by running the experiment under fixed and moving base conditions, the latter in two modes; full motion, and angular motion only. Display scanning behavior is measured on some of the runs. The results of the program show that performance is best with angular motion only, most probably because a g-vector tilt cue is available to the pilot in this motion condition. This provides an attitude indication even when not visually fixating the attitude display. Vestibular threshold effects are also present in the results because of the display scaling used to permit hovering position control within the motion simulator limits; no washouts are used in the simulator drive signals. The IFR nature of the task results in large decrements in pilot opinion and performance relative to VFR conditions because of the scanning workload. Measurements of scanning behavior are sensitive to motion conditions and show more attention to attitude control under fixed base conditions.

  11. Preliminary experimental results on studying possibility of variable mass liner (VML) formation

    SciTech Connect

    1995-12-31

    The main objective of the present experiment was to study the formation process and initial stage of acceleration of a variable-mass plasma liner (VML). The method is based on magnetic acceleration of a liner with the mass reduced during such acceleration. The experiment was carried out on February 16 at VNIIEF. This report describes the results of measurements obtained in the experiment and preliminary analysis of the results characterizing operation of the test facility main units: helical EMG; 5-module disk EMG 400 mm in diameter (DEMG); ponderomotive unit (PU) with a cylindric condensed liner and a special tooth-cutoff. The first part of the report presents measurement results obtained on the VNIIEF`s diagnostic equipment that are compared with those obtained by American specialists on their diagnostic equipment. Information submitted by American specialists is included in part 2 of this report. The second part of the report presents preliminary computational-theoretic analysis of the main measured results describing operation of DEMG TL system in the experiment; experimental data are compared with theoretical ones obtained before and after the experiment. But more emphasis is placed on the data preliminary analysis indicating that in the experiment a variable mass liner is formed (VML or plasma bubble).

  12. Experimental and computer simulation results of the spot welding process using SORPAS software

    NASA Astrophysics Data System (ADS)

    Al-Jader, M. A.; Cullen, J. D.; Athi, N.; Al-Shamma'a, A. I.

    2009-07-01

    The highly competitive nature of the automotive industry drives demand for improvements and increased precision engineering in resistance spot welding. Currently there are about 4300 weld points on the average steel vehicle. Current industrial monitoring systems check the quality of the nugget after processing 15 cars, once every two weeks. The nuggets are examined off line using a destructive process, which takes approximately 10 days to complete causing a long delay in the production process. This paper presents a simulation of the spot welding growth curves, along with a comparison to growth curves performed on an industrial spot welding machine. The correlation of experimental results shows that SORPAS simulations can be used as an off line measurement to reduce factory energy usage. The first section in your paper

  13. Lateral and axial resolutions of an angle-deviation microscope for different numerical apertures: experimental results

    NASA Astrophysics Data System (ADS)

    Chiu, Ming-Hung; Lai, Chin-Fa; Tan, Chen-Tai; Lin, Yi-Zhi

    2011-03-01

    This paper presents a study of the lateral and axial resolutions of a transmission laser-scanning angle-deviation microscope (TADM) with different numerical aperture (NA) values. The TADM is based on geometric optics and surface plasmon resonance principles. The surface height is proportional to the phase difference between two marginal rays of the test beam, which is passed through the test medium. We used common-path heterodyne interferometry to measure the phase difference in real time, and used a personal computer to calculate and plot the surface profile. The experimental results showed that the best lateral and axial resolutions for NA = 0.41 were 0.5 μm and 3 nm, respectively, and the lateral resolution breaks through the diffraction limits.

  14. Inlet Flow Test Calibration for a Small Axial Compressor Facility. Part 1: Design and Experimental Results

    NASA Technical Reports Server (NTRS)

    Miller, D. P.; Prahst, P. S.

    1994-01-01

    An axial compressor test rig has been designed for the operation of small turbomachines. The inlet region consisted of a long flowpath region with two series of support struts and a flapped inlet guide vane. A flow test was run to calibrate and determine the source and magnitudes of the loss mechanisms in the inlet for a highly loaded two-stage axial compressor test. Several flow conditions and IGV angle settings were established in which detailed surveys were completed. Boundary layer bleed was also provided along the casing of the inlet behind the support struts and ahead of the IGV. A detailed discussion of the flowpath design along with a summary of the experimental results are provided in Part 1.

  15. Deuteron induced reactions on Ho and La: Experimental excitation functions and comparison with code results

    NASA Astrophysics Data System (ADS)

    Hermanne, A.; Adam-Rebeles, R.; Tarkanyi, F.; Takacs, S.; Csikai, J.; Takacs, M. P.; Ignatyuk, A.

    2013-09-01

    Activation products of rare earth elements are gaining importance in medical and technical applications. In stacked foil irradiations, followed by high resolution gamma spectroscopy, the cross-sections for production of 161,165Er, 166gHo on 165Ho and 135,137m,137g,139Ce, 140La, 133m,133g,cumBa and 136Cs on natLa targets were measured up to 50 MeV. Reduced uncertainty is obtained by simultaneous remeasurement of the 27Al(d,x)24,22Na monitor reactions over the whole energy range. A comparison with experimental literature values and results from updated theoretical codes (ALICE-D, EMPIRE-D and the TENDL2012 online library) is discussed.

  16. School Context and Educational Outcomes: Results from a Quasi-Experimental Study

    PubMed Central

    Casciano, Rebecca; Massey, Douglas S.

    2013-01-01

    In this study we draw on data from a quasi-experimental study to test whether moving into a subsidized housing development in an affluent suburb yields educational benefits to the children of residents, compared to the educations they would have received had they not moved into the development. Results suggest that resident children experienced a significant improvement in school quality compared with a comparison group of students whose parents also had applied for residence. Parents who were residents of the development also displayed higher levels of school involvement compared with the comparison group of non-resident parents, and their children were exposed to significantly lower levels of school disorder and violence within school and spent more time reading outside of school. Living in the development did not influence GPA directly, but did indirectly increase GPA by increasing the time residents spent reading outside of school. PMID:25342878

  17. Knowledge-Aided Multichannel Adaptive SAR/GMTI Processing: Algorithm and Experimental Results

    NASA Astrophysics Data System (ADS)

    Wu, Di; Zhu, Daiyin; Zhu, Zhaoda

    2010-12-01

    The multichannel synthetic aperture radar ground moving target indication (SAR/GMTI) technique is a simplified implementation of space-time adaptive processing (STAP), which has been proved to be feasible in the past decades. However, its detection performance will be degraded in heterogeneous environments due to the rapidly varying clutter characteristics. Knowledge-aided (KA) STAP provides an effective way to deal with the nonstationary problem in real-world clutter environment. Based on the KA STAP methods, this paper proposes a KA algorithm for adaptive SAR/GMTI processing in heterogeneous environments. It reduces sample support by its fast convergence properties and shows robust to non-stationary clutter distribution relative to the traditional adaptive SAR/GMTI scheme. Experimental clutter suppression results are employed to verify the virtue of this algorithm.

  18. Noise characteristics of upper surface blown configurations. Experimental program and results

    NASA Technical Reports Server (NTRS)

    Brown, W. H.; Searle, N.; Blakney, D. F.; Pennock, A. P.; Gibson, J. S.

    1977-01-01

    An experimental data base was developed from the model upper surface blowing (USB) propulsive lift system hardware. While the emphasis was on far field noise data, a considerable amount of relevant flow field data were also obtained. The data were derived from experiments in four different facilities resulting in: (1) small scale static flow field data; (2) small scale static noise data; (3) small scale simulated forward speed noise and load data; and (4) limited larger-scale static noise flow field and load data. All of the small scale tests used the same USB flap parts. Operational and geometrical variables covered in the test program included jet velocity, nozzle shape, nozzle area, nozzle impingement angle, nozzle vertical and horizontal location, flap length, flap deflection angle, and flap radius of curvature.

  19. Active vibration absorber for CSI evolutionary model: Design and experimental results

    NASA Technical Reports Server (NTRS)

    Bruner, Anne M.; Belvin, W. Keith; Horta, Lucas G.; Juang, Jer-Nan

    1991-01-01

    The development of control of large flexible structures technology must include practical demonstration to aid in the understanding and characterization of controlled structures in space. To support this effort, a testbed facility was developed to study practical implementation of new control technologies under realistic conditions. The design is discussed of a second order, acceleration feedback controller which acts as an active vibration absorber. This controller provides guaranteed stability margins for collocated sensor/actuator pairs in the absence of sensor/actuator dynamics and computational time delay. The primary performance objective considered is damping augmentation of the first nine structural modes. Comparison of experimental and predicted closed loop damping is presented, including test and simulation time histories for open and closed loop cases. Although the simulation and test results are not in full agreement, robustness of this design under model uncertainty is demonstrated. The basic advantage of this second order controller design is that the stability of the controller is model independent.

  20. Comparison of thermal modeling and experimental results of a generic model for ground vehicle

    NASA Astrophysics Data System (ADS)

    Bushlin, Y.; Lessin, A.; Reinov, A.

    2006-05-01

    Accurate thermal modeling requires verification and validation of the model and software being used. For basic evaluation of thermal prediction models and software tools, a generic model - CUBI was build. The model was designed to have simple geometry yet, consisted of similar characteristics as of a ground vehicle. The model was equipped with thermocouples for measuring its temperature variations and was placed in a typical desert environment for field testing. The experimental setup also included a meteorological station. The data collected was used for the thermal behavior analysis of the generic model and for comparison with the thermal calculations predictions. Comparison of the results shows sufficient compliance but yet reviles some issues in the modeling that should be addressed.

  1. Modelling Viscoelastic Behaviour of Polymer by A Mixed Velocity, Displacement Formulation - Numerical and Experimental Results

    SciTech Connect

    Pham, VT.; Silva, L.; Digonnet, H.; Combeaud, C.; Billon, N.; Coupez, T.

    2011-05-04

    The objective of this work is to model the viscoelastic behaviour of polymer from the solid state to the liquid state. With this objective, we perform experimental tensile tests and compare with simulation results. The chosen polymer is a PMMA whose behaviour depends on its temperature. The computation simulation is based on Navier-Stokes equations where we propose a mixed finite element method with an interpolation P1+/P1 using displacement (or velocity) and pressure as principal variables. The implemented technique uses a mesh composed of triangles (2D) or tetrahedra (3D). The goal of this approach is to model the viscoelastic behaviour of polymers through a fluid-structure coupling technique with a multiphase approach.

  2. Experimental Results from Droop Compensation for the High Voltage Converter Modulators

    SciTech Connect

    Patel, Gunjan P; Anderson, David E; Peplov, Vladimir V; Saethre, Robert B; Solley, Dennis J; Wezensky, Mark W

    2013-01-01

    The High Voltage Convertor Modulators are used to power the RF klystrons used throughout the linear accelerator at the Spallation Neutron Source. The output voltage of the modulator has significant voltage droop and ripple which, combined with low level RF system limitations, affect performance and stability of the accelerator cavities. In conjunction with the progress in the development of the new controller, different modulation techniques were implemented and studied on the test modulator. This paper discusses experimental results from implementation of different modulation schemes has on the modulator output voltage pulse. Thermal measurements were carried out to determine the effect of these modulations schemes on long term reliability of the modulator. Future plans are also discussed.

  3. An aerodynamic analysis of the autogiro rotor with a comparison between calculated and experimental results

    NASA Technical Reports Server (NTRS)

    Wheatley, John B

    1935-01-01

    This report presents an extension of the autogiro theory of Glauert and Lock in which the influence of a pitch varying with the blade radius is evaluated and methods of approximating the effect of blade tip losses and the influence of reversed velocities on the retreating blades are developed. A comparison of calculated and experimental results showed that most of the rotor characteristics could be calculated with reasonable accuracy, and that the type of induced flow assumed has a secondary effect upon the net rotor forces, although the flapping motion is influenced appreciably. An approximate evaluation of the effect of parasite drag on the rotor blades established the importance of including this factor in the analysis.

  4. Physical model and experimental results of cathode erosion related to power supply ripple

    NASA Technical Reports Server (NTRS)

    Harris, W. J.; O'Hair, E. A.; Hatfield, L. L.; Kristiansen, M.

    1992-01-01

    This paper discusses the physical effects of power supply ripple on cathode erosion and cathode arc attachment in a water-cooled, 30 kW nitrogen arcjet. Experimental results are presented for 2 percent thoriated tungsten, which show that the long-term cathode erosion rate is a decreasing function of current ripple over the range 1-13 percent. Above this range, the cathode discharge becomes unstable, and the erosion rate rapidly increases. A qualitative model of this effect is given in terms of a magnetically induced radial motion of the arc column, and an overall increase in the cathode spot radius due to the higher peak current associated with higher ripple. The most important effect of power supply ripple is therefore shown to be its ability to collectively drive the cathode attachment away from the cathode center. This leads to an increase in the cathode attachment area, and a subsequent decrease in the cathode erosion rate.

  5. Simulation and experimental results of optical and thermal modeling of gold nanoshells.

    PubMed

    Ghazanfari, Lida; Khosroshahi, Mohammad E

    2014-09-01

    This paper proposes a generalized method for optical and thermal modeling of synthesized magneto-optical nanoshells (MNSs) for biomedical applications. Superparamagnetic magnetite nanoparticles with diameter of 9.5 ± 1.4 nm are fabricated using co-precipitation method and subsequently covered by a thin layer of gold to obtain 15.8 ± 3.5 nm MNSs. In this paper, simulations and detailed analysis are carried out for different nanoshell geometry to achieve a maximum heat power. Structural, magnetic and optical properties of MNSs are assessed using vibrating sample magnetometer (VSM), X-ray diffraction (XRD), UV-VIS spectrophotometer, dynamic light scattering (DLS), and transmission electron microscope (TEM). Magnetic saturation of synthesized magnetite nanoparticles are reduced from 46.94 to 11.98 emu/g after coating with gold. The performance of the proposed optical-thermal modeling technique is verified by simulation and experimental results. PMID:25063109

  6. Optical constants of Titan aerosols and their tholins analogs: Experimental results and modeling/observational data

    NASA Astrophysics Data System (ADS)

    Brassé, Coralie; Muñoz, Olga; Coll, Patrice; Raulin, François

    2015-05-01

    Since Bishun Khare's pioneer works on Titan tholins, many studies have been performed to improve the experimental database of the optical constants of Titan tholins. The determination of the optical constants of Titan aerosols is indeed essential to quantify their capacity to absorb and scatter solar radiation, and thus to evaluate their role on Titan's radiative balance and climate. The study of the optical properties is also crucial to analyze and better interpret many of Titan's observational data, in particular those acquired during the Cassini-Huygens mission. This review paper critically summarizes these new results and presents constraints on Titan's aerosols optical constants. Finally, the information lacking in this field is highlighted as well as some possible investigations that could be carried out to fill these gaps.

  7. NACA0012 benchmark model experimental flutter results with unsteady pressure distributions

    NASA Technical Reports Server (NTRS)

    Rivera, Jose A., Jr.; Dansberry, Bryan E.; Bennett, Robert M.; Durham, Michael H.; Silva, Walter A.

    1992-01-01

    The Structural Dynamics Division at NASA Langley Research Center has started a wind tunnel activity referred to as the Benchmark Models Program. The primary objective of this program is to acquire measured dynamic instability and corresponding pressure data that will be useful for developing and evaluating aeroelastic type computational fluid dynamics codes currently in use or under development. The program is a multi-year activity that will involve testing of several different models to investigate various aeroelastic phenomena. This paper describes results obtained from a second wind tunnel test of the first model in the Benchmark Models Program. This first model consisted of a rigid semispan wing having a rectangular planform and a NACA 0012 airfoil shape which was mounted on a flexible two degree of freedom mount system. Experimental flutter boundaries and corresponding unsteady pressure distribution data acquired over two model chords located at the 60 and 95 percent span stations are presented.

  8. First experimental results of the BNL inverse free electron laser accelerator

    SciTech Connect

    Steenbergen, A. van; Gallardo, J.; Babzien, M.; Skaritka, J.; Wang, X.J.; Sandweiss, J.; Fang, J.M.; Qiu, X.

    1996-10-01

    A 40 MeV electron beam, using the inverse3e free-electron laser interaction, has been accelerated by {Delta}E/E = 2.5% over a distance of 0.47 m. The electrons interact with a 1--2 GW CO{sub 2} laser beam bounded by a 2.8 mm ID sapphire circular waveguide in the presence of a tapered wiggler with Bmax {approx} 1 T and a period 2.89 cm {le} {lambda}{sub w} {le} 3.14 cm. The experimental results of {Delta}E/E as a function of electron energy E, peak magnetic field Bw and laser power W{sub 1} compare well with analytical and 1-D numerical simulations and permit scaling to higher laser power and electron energy.

  9. Experimental results of active control on a large structure to suppress vibration

    NASA Technical Reports Server (NTRS)

    Dunn, H. J.

    1991-01-01

    Three design methods, Linear Quadratic Gaussian with Loop Transfer Recovery (LQG/LTR), H-infinity, and mu-synthesis, are used to obtain compensators for suppressing the vibrations of a 10-bay vertical truss structure, a component typical of what may be used to build a large space structure. For the design process the plant dynamic characteristics of the structure were determined experimentally using an identification method. The resulting compensators were implemented on a digital computer and tested for their ability to suppress the first bending mode response of the 10-bay vertical truss. Time histories of the measured motion are presented, and modal damping obtained during the experiments are compared with analytical predictions. The advantages and disadvantages of using the various design methods are discussed.

  10. Fault induction dynamic model, suitable for computer simulation: Simulation results and experimental validation

    NASA Astrophysics Data System (ADS)

    Baccarini, Lane Maria Rabelo; de Menezes, Benjamim Rodrigues; Caminhas, Walmir Matos

    2010-01-01

    The study of induction motor behavior under not normal conditions and the ability to detect and predict these conditions has been an area of increasing interest. Early detection and diagnosis of incipient faults are desirable for interactive evaluation over the running condition, product quality guarantee, and improved operational efficiency of induction motors. The main difficulty in this task is the lack of accurate analytical models to describe a faulty motor. This paper proposes a dynamic model to analyze electrical and mechanical faults in induction machines and includes net asymmetries and load conditions. The model permits to analyze the interactions between different faults in order to detect possible false alarms. Simulations and experimental results were performed to confirm the validity of the model.

  11. Some experimental results on the L-star instability of metallized composite propellants. [combustion instability

    NASA Technical Reports Server (NTRS)

    Kumar, R. N.

    1975-01-01

    Experimental results are reported on the L-star instability characteristics of three AP/composite propellants. The metal content of the propellants is 2, 16, and 16%. Chuffing, bulk mode oscillations, and time-independent combustion are observed with all three of these propellants. The stability boundary, defined as the boundary between time-independent and unstable combustion, is found to be well defined for two of the propellants in agreement with recognized trends available in the literature on other propellants. The frequency of bulk mode oscillations is presented as a function of the chamber characteristic length. One of the propellants tested has shown bulk mode instability at as high a pressure as 217 psia.

  12. Preliminary Results on the Experimental Investigation of the Structure Functions of Bound Nucleons

    SciTech Connect

    Bodek, Arie

    2015-09-01

    We present preliminary results on an experimental study of the nuclear modification of the longitudinal (σL) and transverse (σT) structure functions of nucleons bound in nuclear targets. The origin of these modifications (commonly referred as as the EMC effect) is not fully understood. Our measurements of R= σLT for nuclei (RA) and for deuterium (RD) indicate that nuclear modifications of the structure functions of bound nucleons are different for the longitudinal and transverse structure functions, and that contrary to expectation from several theoretical models, RA < RD.

  13. Theoretical versus experimental results for the rotordynamic coefficients of eccentric, smooth, gas annular seal annular gas seals

    NASA Technical Reports Server (NTRS)

    Childs, Dara W.; Alexander, Chis

    1994-01-01

    This viewgraph presentation presents the following results: (1) The analytical results overpredict the experimental results for the direct stiffness values and incorrectly predict increasing stiffness with decreasing pressure ratios. (2) Theory correctly predicts increasing cross-coupled stiffness, K(sub YX), with increasing eccentricity and inlet preswirl. (3) Direct damping, C(sub XX), underpredicts the experimental results, but the analytical results do correctly show that damping increases with increasing eccentricity. (4) The whirl frequency values predicted by theory are insensitive to changes in the static eccentricity ratio. Although these values match perfectly with the experimental results at 16,000 rpm, the results at the lower speed do not correspond. (5) Theoretical and experimental mass flow rates match at 5000 rpm, but at 16,000 rpm the theoretical results overpredict the experimental mass flow rates. (6) Theory correctly shows the linear pressure profiles and the associated entrance losses with the specified rotor positions.

  14. Reduction of FeO in smelting slags by solid carbon: Experimental results

    NASA Astrophysics Data System (ADS)

    Sarma, B.; Cramb, A. W.; Fruehan, R. J.

    1996-10-01

    The reduction of CaO-SiO2-Al2O3-FeO slags containing less than 10 wt pct FeO by solid carbonaceous materials such as graphite, coke, and coal char was investigated at reaction temperatures of 1400 °C to 1450 °C. The carbon monoxide evolution rate from the system was measured using stationary and rotating carbon rods, stationary horizontal carbon surfaces, and pinned stationary spheres as the reductants. The measured reaction rate ranged from 3.25 × 10-7 mol cm-2 s-1 at 2.1 pct FeO under static conditions to 3.6 × 10-6 mol cm-2 s-1 at 9.5 pct FeO for a rotating rod experiment. Visualization of the experiment using X-ray fluoroscopy showed that gas evolution from the reduction reaction caused the slag to foam during the experiment and that a gas film formed between the carbon surface and the slag at all times during experimentation. The reaction rate increased with increased slag FeO contents under all experimental conditions; however, this variation was not linear with FeO content. The reaction rate also increased with the rotation speed of the carbon rod at a given FeO content. A small increase in the reaction rate, at a given FeO content, was found when horizontal coke surfaces and coke spheres were used as the reductant as compared to graphite and coal char. The results of these experiments do not fit the traditional mass transfer correlations due to the evolution of gas during the experiment. The experimental results are consistent, however, with the hypothesis that liquid phase mass transfer of iron oxide is a major factor in the rate of reduction of iron oxide from slags by carbonaceous materials. In a second article, the individual rates of the possible limiting steps will be compared and a mixed control model will be used to explain the measured reaction rates.

  15. Using leg muscles as shock absorbers: theoretical predictions and experimental results of drop landing performance.

    PubMed

    Minetti, A E; Ardigò, L P; Susta, D; Cotelli, F

    1998-12-01

    The use of muscles as power dissipators is investigated in this study, both from the modellistic and the experimental points of view. Theoretical predictions of the drop landing manoeuvre for a range of initial conditions have been obtained by accounting for the mechanical characteristics of knee extensor muscles, the limb geometry and assuming maximum neural activation. Resulting dynamics have been represented in the phase plane (vertical displacement versus speed) to better classify the damping performance. Predictions of safe landing in sedentary subjects were associated to dropping from a maximum (feet) height of 1.6-2.0 m (about 11 m on the moon). Athletes can extend up to 2.6-3.0 m, while for obese males (m = 100 kg, standard stature) the limit should reduce to 0.9-1.3 m. These results have been calculated by including in the model the estimated stiffness of the 'global elastic elements' acting below the squat position. Experimental landings from a height of 0.4, 0.7, 1.1 m (sedentary males (SM) and male (AM) and female (AF) athletes from the alpine ski national team) showed dynamics similar to the model predictions. While the peak power (for a drop height of about 0.7 m) was similar in SM and AF (AM shows a +40% increase, about 33 W/kg), AF stopped the downward movement after a time interval (0.219 +/- 0.030 s) from touch-down 20% significantly shorter than SM. Landing strategy and the effect of anatomical constraints are discussed in the paper. PMID:9857837

  16. Preliminary experimental results in humans and animals with a superconducting, whole-body, nuclear magnetic resonance scanner. [Dogs

    SciTech Connect

    Alfidi, R.J,; Haaga, J.R.; El Yousef, S.J.

    1982-04-01

    In order to determine the clinical usefulness of nuclear magnetic resonance (NMR) imaging, the investigators examined a variety of normal volunteers, patients with neoplastic lesions, and experimental animals. Preliminary results were obtained with the use of potential contrast agents. It was found that imaging applications of NMR in the vascular system, spine, brain, lung, and mediastinum offer certain advantages over other modalities. The absence of biological hazard as well as the ability to obtain unenhanced, noninvasive, gated images of the vascular system, as demonstrated in this study, make NMR particularly attractive. In addition to single-section capability, NMR makes it possible to obtain volume images of the spine and other organs which can be displayed in any desired plane or section thickness.

  17. Comparison Between Numerical and Experimental Results on Mechanical Stirrer and Bubbling in a Cylindrical Tank - 13047

    SciTech Connect

    Lima da Silva, M.; Sauvage, E.; Brun, P.; Gagnoud, A.; Fautrelle, Y.; Riva, R.

    2013-07-01

    The process of vitrification in a cold crucible heated by direct induction is used in the fusion of oxides. Its feature is the production of high-purity materials. The high-level of purity of the molten is achieved because this melting technique excludes the contamination of the charge by the crucible. The aim of the present paper is to analyze the hydrodynamic of the vitrification process by direct induction, with the focus in the effects associated with the interaction between the mechanical stirrer and bubbling. Considering the complexity of the analyzed system and the goal of the present work, we simplified the system by not taking into account the thermal and electromagnetic phenomena. Based in the concept of hydraulic similitude, we performed an experimental study and a numerical modeling of the simplified model. The results of these two studies were compared and showed a good agreement. The results presented in this paper in conjunction with the previous work contribute to a better understanding of the hydrodynamics effects resulting from the interaction between the mechanical stirrer and air bubbling in the cold crucible heated by direct induction. Further works will take into account thermal and electromagnetic phenomena in the presence of mechanical stirrer and air bubbling. (authors)

  18. Results of the NASA/General Electric Experimental Clean Combustor Program

    NASA Technical Reports Server (NTRS)

    Gleason, C. C.; Niedzwiecki, R. W.

    1976-01-01

    The NASA/General Electric Experimental Clean Combustor Program is a multi-year, major contract effort. Primary program objectives are the generation of technology for development of advanced commercial CTOL engines with lower exhaust emissions than current aircraft and, demonstrations of this technology in a full-scale CF6-50C engine in 1976. This paper describes pollution and performance goals, Phase I and II test results and Phase III hardware, pollution sampling techniques and test plans. Pollution results are presented in emission index and Environmental Protection Agency 1979 Standard Parameters (EPAP). Best results were obtained with a double annular combustor concept. This concept, which incorporates multistage burning, produced EPAP values extrapolated to CF6-50C engine conditions for CO, HC, and NOx of 3.3, 0.3 and 4.5, respectively. These represent respective CO, HC and NOx percentage reductions of 69, 93 and 42%, compared to current CF6-50 engine values. The combustor also met development engine performance requirements.

  19. Optimal placement of piezoelectric plates for active vibration control of gas turbine blades: experimental results

    NASA Astrophysics Data System (ADS)

    Botta, F.; Marx, N.; Gentili, S.; Schwingshackl, C. W.; Di Mare, L.; Cerri, G.; Dini, D.

    2012-04-01

    It is well known that the gas turbine blade vibrations can give rise to catastrophic failures and a reduction of the blades life because of fatigue related phenomena[1]-[3] . In last two decades, the adoption of piezoelectric elements, has received considerable attention by many researcher for its potential applicability to different areas of mechanical, aerospace, aeronautical and civil engineering. Recently, a number of studies of blades vibration control via piezoelectric plates and patches have been reported[4]-[6] . It was reported that the use of piezoelectric elements can be very effective in actively controlling vibrations. In one of their previous contributions[7] , the authors of the present manuscript studied a model to control the blade vibrations by piezoelectric elements and validated their results using a multi-physics finite elements package (COMSOL) and results from the literature. An optimal placement method of piezoelectric plate has been developed and applied to different loading scenarios for realistic configurations encountered in gas turbine blades. It has been demonstrated that the optimal placement depends on the spectrum of the load, so that segmented piezoelectric patches have been considered and, for different loads, an optimal combination of sequential and/or parallel actuation and control of the segments has been studied. In this paper, an experimental investigation carried out by the authors using a simplified beam configuration is reported and discussed. The test results obtained by the investigators are then compared with the numerical predictions [7] .

  20. Experimental results of the influence of ionic strength in liquid environment on fiber life

    NASA Astrophysics Data System (ADS)

    Overgaard, Jette V.

    1996-01-01

    Stress free corrosion such as chemical dissolution of silica optical fibers is normally assumed to be a pure pH dependent reaction. In our investigation we have found that it is not only the pH values that influence the lifetime of the fiber in water, but also the ionic strength of the water in contact with the fiber. We have seen that the lifetime of the normal dual coated fibers is severely reduced in seawater compared to the lifetime in deionized water. Carbon coated fibers show better results in these harsh conditions; but the experiments also demonstrate that the carbon coated fibers begin to fail before they have had a sufficient lifetime. A chemical explanation of the results, based on dissolution of glass in water and influence from the ions in question, is given. In this paper, experimental results from long term static fatigue tests on fibers in different liquid environments is shown. In the laboratory we have samples still living after almost four years in different environments. We have buffered water at pH values from 3 to 11, artificial seawater and deionized water. The fibers in the tests are both commercially available dual coated and carbon coated fibers and carbon coated test fibers.

  1. Large Fluorescence Enhancements of Fluorophore Ensembles with Multilayer Plasmonic Substrates: Comparison of Theory and Experimental Results

    PubMed Central

    Szmacinski, Henryk; Badugu, Ramachandram; Mahdavi, Farhad; Blair, Steve; Lakowicz, Joseph R.

    2013-01-01

    Multilayer substrates consisting of a glass slide, silver mirror, silica layer, and silver nanoparticles were fabricated using magnetron sputtering. This new geometry of substrates with backplane mirror and dielectric photonic cavity produced large average fluorescence enhancements up to 190-fold. Fluorescence enhancements of five fluorescent probes were measured over the broad spectral range from 470 to 800 nm. Fluorescent probes were streptavidin conjugates attached to the substrate surface through a layer of biotinylated bovine serum albumin. The protein layers represent a common surface modification for surface-based bioassays such as immunoassays or molecular diagnostic assays. We found that optimal enhancement is dependent on the thickness of the dielectric layer separating the silver mirror and the silver nanoparticles and on the spectral range. We performed numerical calculations for enhancement in both the excitation and emission using finite element method (FEM) the results of which were in qualitative agreement with the experimental results. The described method for fabrication multilayered substrates and the results obtained with protein layers demonstrate great potential for the design of simple and ultrasensitive fluorometric bioassays with large optical amplifications compared to the standard approaches of enzyme-based bioassays with dielectric surfaces. PMID:24163712

  2. Theoretical and experimental examination of recovery in the context of trueness of analytical results.

    PubMed

    Stafiński, Maciej; Wieczorek, Marcin; Janicki, Piotr; Kościelniak, Paweł

    2012-07-15

    In the report of the International Union of Pure and Applied Chemistry (IUPAC) estimation of analyte recovery (RV) is recommended as one of the ways for assessment of trueness of analytical results. RV is usually estimated with the use of samples spiked with known amount of analyte. However, neither the IUPAC guidelines, nor the available literature take into consideration various effects of different nature that may occur along the sample preparation steps prior and during measurements. Hence, in this work the attempt was made to classify these effects and to evaluate their influence on the analyte recovery. For this purpose a mathematical model has been developed, enabling to judge usefulness of the recovery test in objective estimation of trueness, and the results predicted by the model were checked experimentally. Trueness was estimated on the basis of analytical results obtained by both interpolative and extrapolative ways. The experiments were performed with the use of a dedicated flow injection system coupled to UV/VIS spectrometer and covered determination of chromium(III) as chromium(III) nitrate at a wavelength of 590nm. PMID:22817925

  3. An experimental investigation of multi-element airfoil ice accretion and resulting performance degradation

    NASA Technical Reports Server (NTRS)

    Potapczuk, Mark G.; Berkowitz, Brian M.

    1989-01-01

    An investigation of the ice accretion pattern and performance characteristics of a multi-element airfoil was undertaken in the NASA Lewis 6- by 9-Foot Icing Research Tunnel. Several configurations of main airfoil, slat, and flaps were employed to examine the effects of ice accretion and provide further experimental information for code validation purposes. The text matrix consisted of glaze, rime, and mixed icing conditions. Airflow and icing cloud conditions were set to correspond to those typical of the operating environment anticipated tor a commercial transport vehicle. Results obtained included ice profile tracings, photographs of the ice accretions, and force balance measurements obtained both during the accretion process and in a post-accretion evaluation over a range of angles of attack. The tracings and photographs indicated significant accretions on the slat leading edge, in gaps between slat or flaps and the main wing, on the flap leading-edge surfaces, and on flap lower surfaces. Force measurments indicate the possibility of severe performance degradation, especially near C sub Lmax, for both light and heavy ice accretion and performance analysis codes presently in use. The LEWICE code was used to evaluate the ice accretion shape developed during one of the rime ice tests. The actual ice shape was then evaluated, using a Navier-Strokes code, for changes in performance characteristics. These predicted results were compared to the measured results and indicate very good agreement.

  4. Experimental and computational results from the NASA Lewis low-speed centrifugal impeller at design and part-flow conditions

    SciTech Connect

    Chriss, R.M.; Wood, J.R.; Hathaway, M.D.

    1996-01-01

    The NASA Lewis Low-Speed Centrifugal Compressor (LSCC) has been investigated with laser anemometry and computational analysis at two flow conditions: the design condition as well as a lower mass flow condition. Previously reported experimental and computational results at the design condition are in the literature (Hathaway et al., 1993). In that paper extensive analysis showed that inducer blade boundary layers are centrifuged outward and entrained into the tip clearance flow and hence contribute significantly to the throughflow wake. In this report results are presented for a lower mass flow condition along with further results from the design case. The data set contained herein consists of three-dimensional laser velocimeter results upstream, inside, and downstream of the impeller. In many locations data have been obtained in the blade and endwall boundary layers. The data are presented in the form of throughflow velocity contours as well as secondary flow vectors. The results reported herein illustrate the effects of flow rate on the development of the throughflow momentum wake as well as on the secondary flow. The computational results presented confirm the ability of modern computational tools to model the complex flow in a subsonic centrifugal compressor accurately. However, the blade tip shape and tip clearance must be known in order to properly simulate the flow physics. In addition, the ability to predict changes in the throughflow wake, which is largely fed by the tip clearance flow, as the impeller is throttled should give designers much better confidence in using computational tools to improve impeller performance.

  5. Prognosis of Slagging and Fouling Properties of Coals Based on Widely Available Data and Results of Additional Measuraments

    NASA Astrophysics Data System (ADS)

    Alekhnovich, Alexander N.; Artemjeva, Natalja V.; Bogomolov, Vladimir V.; Shchelokov, Vyacheslav I.; Petukhov, Vasilij G.

    Ranging of coals according to the slagging properties of similar type and investigated coals could be made on the basis of the available reference data. However, to define the slagging and fouling properties of a random coal it is necessary to carry out additional laboratory research.

  6. A stereo triangulation system for structural identification: Analytical and experimental results

    NASA Technical Reports Server (NTRS)

    Junkins, J. L.; James, G. H., III; Pollock, T. C.; Rahman, Z. H.

    1988-01-01

    , and have established conclusively the feasibility and desirability of this approach. We discuss, in summary, recent advances in analog and digital video processing methodology, actuation methods, and bring them to bear on the structural identification problem. We include a brief discussion of our experimental hardware and some recent experimental results which support the practical feasibility of this structural vibration sensing approach.

  7. Frequency-dependent seismic attenuation in shales: Experimental results and theoretical analysis

    NASA Astrophysics Data System (ADS)

    Delle Piane, C.; Madonna, C.; Sarout, J.; Saenger, E. H.; Dewhurst, D.

    2012-12-01

    Shale samples of from the Ordovician Bongabinni and Goldwyer source rock formations (Canning Basin, Western Australia) were characterized in terms of mineralogy, water content, porosity, permeability and microstructure. Additionally attenuation was experimentally measured in the frequency range between 10-2-102 Hz. Preserved samples cored with different orientation with respect to the bedding were prepared and tested in their native saturated state and after drying at 105°C for 24 hours to assess the effect of fluids and of the sediment anisotropy on attenuation. The two shales have significantly different quality factors; and this is seen to be dependent on both the saturation state of the samples and the propagation direction of the oscillatory signal. The attenuation coefficient parallel to bedding is less than that vertical to bedding in both the saturated and partially dehydrated situations. No frequency dependency is observed in the fully saturated samples within the range of frequencies explored in this study. On the other hand partially saturated samples show peaks in attenuation at around 40 Hz when the stress perturbation is transmitted normal to the macroscopic bedding. Through theroetical models we interpret this behavior to be due to fluid motion at the meso- and microscale; i.e. a combination of squirt flow between compliant pores (aspect ratio ≈ 10-3) and fluid motion within saturated portions of the samples with characteristic size ≈ 10-4m . This interpretation is compatible with microstructural investigation by SEM, mercury injection porosimetry and synchrotron micro-tomographic images revealing both quantitative and qualitative information on the pore geometry and size within the two shales.

  8. Phase-space analysis and experimental results for secondary focusing at X-ray beamlines

    SciTech Connect

    Huang, Rong; Meron, Mati; Kujala, Naresh; Barrea, Raul A.

    2011-11-17

    Micro-focusing optical devices at synchrotron beamlines usually have a limited acceptance, but more flux can be intercepted if such optics are used to focus secondary sources created by the primary optics. Flux throughput can be maximized by placing the secondary focusing optics close to or exactly at the secondary source position. However, standard methods of beamline optics analysis, such as the lens equation or matching the mirror surface to an ellipse, work poorly when the source-to-optics distance is very short. In this paper the general characteristics of the focusing of beams with Gaussian profiles by a 'thin lens' are analysed under the paraxial approximation in phase space, concluding that the focusing of a beam with a short source-to-optics distance is distinct from imaging the source; slope errors are successfully included in all the formulas so that they can be used to calculate beamline focusing with good accuracy. A method is also introduced to use the thin-lens result to analyse the micro-focusing produced by an elliptically bent trapezoid-shaped Kirkpatrick-Baez mirror. The results of this analysis are in good agreement with ray-tracing simulations and are confirmed by the experimental results of the secondary focusing at the 18-ID Bio-CAT beamline (at the APS). The result of secondary focusing carried out at 18-ID using a single-bounce capillary can also be explained using this phase-space analysis. A discussion of the secondary focusing results is presented at the end of this paper.

  9. Synthesizing large-scale pyroclastic flows: Experimental design, scaling, and first results from PELE

    NASA Astrophysics Data System (ADS)

    Lube, G.; Breard, E. C. P.; Cronin, S. J.; Jones, J.

    2015-03-01

    Pyroclastic flow eruption large-scale experiment (PELE) is a large-scale facility for experimental studies of pyroclastic density currents (PDCs). It is used to generate high-energy currents involving 500-6500 m3 natural volcanic material and air that achieve velocities of 7-30 m s-1, flow thicknesses of 2-4.5 m, and runouts of >35 m. The experimental PDCs are synthesized by a controlled "eruption column collapse" of ash-lapilli suspensions onto an instrumented channel. The first set of experiments are documented here and used to elucidate the main flow regimes that influence PDC dynamic structure. Four phases are identified: (1) mixture acceleration during eruption column collapse, (2) column-slope impact, (3) PDC generation, and (4) ash cloud diffusion. The currents produced are fully turbulent flows and scale well to natural PDCs including small to large scales of turbulent transport. PELE is capable of generating short, pulsed, and sustained currents over periods of several tens of seconds, and dilute surge-like PDCs through to highly concentrated pyroclastic flow-like currents. The surge-like variants develop a basal <0.05 m thick regime of saltating/rolling particles and shifting sand waves, capped by a 2.5-4.5 m thick, turbulent suspension that grades upward to lower particle concentrations. Resulting deposits include stratified dunes, wavy and planar laminated beds, and thin ash cloud fall layers. Concentrated currents segregate into a dense basal underflow of <0.6 m thickness that remains aerated. This is capped by an upper ash cloud surge (1.5-3 m thick) with 100 to 10-4 vol % particles. Their deposits include stratified, massive, normally and reversely graded beds, lobate fronts, and laterally extensive veneer facies beyond channel margins.

  10. Responses of Tundra Ecosystems to Environmental Change: Observational and Experimental Results

    NASA Astrophysics Data System (ADS)

    Henry, G. H.

    2004-05-01

    Evidence of environmental changes due to human-enhanced climate warming continues to accumulate from polar regions. Responses in tundra and taiga ecosystems to climate changes have been variable because of the wide range in process response rates, from metabolic processes to adjustments in ecosystem carbon balance, and the variability in environmental settings across local to regional scales. For example, strong increases in rates of plant growth and changes in species composition and abundance have been observed in parts of the Low Arctic, but very little change has been measured in high arctic tundra. A dramatic increase in the cover of deciduous shrubs in areas of the western North American Arctic is predicted to result in positive feedbacks to soil temperature, through increased surface roughness and snow depth, and to atmospheric heating by reducing albedo. Increased shrub cover has also been found in long-term experimental warming studies conducted throughout the tundra biome as part of the International Tundra Experiment (ITEX). Warming is also affecting the carbon balance of tundra and taiga, which hold 25% of the soil carbon of global terrestrial ecosystems. However, trajectories of these changes are largely unknown for most northern systems, and differ because of initial conditions of the carbon and nutrient economy. Over the longer-term, the positive increases in plant growth may be constrained by negative feedbacks to nutrient cycling, as increases in C:N ratios of plant litter slow the release of nitrogen to soils. However, nitrogen availability has been shown to increase in response to short-term warming. In this presentation, I will review the responses of tundra ecosystems to climate variability and change, both through observational and experimental studies.

  11. Dynamics of Dual Prism Adaptation: Relating Novel Experimental Results to a Minimalistic Neural Model

    PubMed Central

    Arévalo, Orlando; Bornschlegl, Mona A.; Eberhardt, Sven; Ernst, Udo; Pawelzik, Klaus; Fahle, Manfred

    2013-01-01

    In everyday life, humans interact with a dynamic environment often requiring rapid adaptation of visual perception and motor control. In particular, new visuo–motor mappings must be learned while old skills have to be kept, such that after adaptation, subjects may be able to quickly change between two different modes of generating movements (‘dual–adaptation’). A fundamental question is how the adaptation schedule determines the acquisition speed of new skills. Given a fixed number of movements in two different environments, will dual–adaptation be faster if switches (‘phase changes’) between the environments occur more frequently? We investigated the dynamics of dual–adaptation under different training schedules in a virtual pointing experiment. Surprisingly, we found that acquisition speed of dual visuo–motor mappings in a pointing task is largely independent of the number of phase changes. Next, we studied the neuronal mechanisms underlying this result and other key phenomena of dual–adaptation by relating model simulations to experimental data. We propose a simple and yet biologically plausible neural model consisting of a spatial mapping from an input layer to a pointing angle which is subjected to a global gain modulation. Adaptation is performed by reinforcement learning on the model parameters. Despite its simplicity, the model provides a unifying account for a broad range of experimental data: It quantitatively reproduced the learning rates in dual–adaptation experiments for both direct effect, i.e. adaptation to prisms, and aftereffect, i.e. behavior after removal of prisms, and their independence on the number of phase changes. Several other phenomena, e.g. initial pointing errors that are far smaller than the induced optical shift, were also captured. Moreover, the underlying mechanisms, a local adaptation of a spatial mapping and a global adaptation of a gain factor, explained asymmetric spatial transfer and generalization of

  12. Dynamics of dual prism adaptation: relating novel experimental results to a minimalistic neural model.

    PubMed

    Arévalo, Orlando; Bornschlegl, Mona A; Eberhardt, Sven; Ernst, Udo; Pawelzik, Klaus; Fahle, Manfred

    2013-01-01

    In everyday life, humans interact with a dynamic environment often requiring rapid adaptation of visual perception and motor control. In particular, new visuo-motor mappings must be learned while old skills have to be kept, such that after adaptation, subjects may be able to quickly change between two different modes of generating movements ('dual-adaptation'). A fundamental question is how the adaptation schedule determines the acquisition speed of new skills. Given a fixed number of movements in two different environments, will dual-adaptation be faster if switches ('phase changes') between the environments occur more frequently? We investigated the dynamics of dual-adaptation under different training schedules in a virtual pointing experiment. Surprisingly, we found that acquisition speed of dual visuo-motor mappings in a pointing task is largely independent of the number of phase changes. Next, we studied the neuronal mechanisms underlying this result and other key phenomena of dual-adaptation by relating model simulations to experimental data. We propose a simple and yet biologically plausible neural model consisting of a spatial mapping from an input layer to a pointing angle which is subjected to a global gain modulation. Adaptation is performed by reinforcement learning on the model parameters. Despite its simplicity, the model provides a unifying account for a broad range of experimental data: It quantitatively reproduced the learning rates in dual-adaptation experiments for both direct effect, i.e. adaptation to prisms, and aftereffect, i.e. behavior after removal of prisms, and their independence on the number of phase changes. Several other phenomena, e.g. initial pointing errors that are far smaller than the induced optical shift, were also captured. Moreover, the underlying mechanisms, a local adaptation of a spatial mapping and a global adaptation of a gain factor, explained asymmetric spatial transfer and generalization of prism adaptation, as

  13. Not so simple: a quasi-experimental study of how researchers adjudicate genetic research results

    PubMed Central

    Hayeems, Robin Zoe; Miller, Fiona Alice; Li, Li; Bytautas, Jessica Peace

    2011-01-01

    Ethicists contend that researchers are obliged to report genetic research findings to individual study participants when they are clinically significant, that is, when they are clinically useful or personally meaningful to participants. Yet whether such standards are well understood and can be consistently applied remains unknown. We conducted an international, cross-sectional survey of cystic fibrosis (CF) and autism genetics researchers using a quasi-experimental design to explore factors influencing researchers' judgments. Eighty percent of researchers agreed, in principle, that clinically significant findings should be reported to individual participants. Yet judgments about when a specific finding was considered clinically significant or warranted reporting varied by scientific factors (replication, robustness, intentionality, and disease context), capacity of the research team to explain the results, and type of research ethics guidance. Further, judgments were influenced by the researchers' disease community (autism or CF), their primary role (clinical, molecular, statistical) and their beliefs regarding a general reporting obligation. In sum, judgments about the clinical significance of genetic research results, and about whether they should be reported, are influenced by scientific parameters as well as contextual factors related to the specific research project and the individual researcher. These findings call into question the assumption that the conditions under which an obligation to disclose arises are uniformly understood and actionable. Adjudicating the clinical readiness of provisional data may be a responsibility better suited to evaluative experts at arms' length of the provisional data in question, rather than a responsibility imposed upon researchers themselves. PMID:21407262

  14. Quantitative Assessment of the CCMC's Experimental Real-time SWMF-Geospace Results

    NASA Astrophysics Data System (ADS)

    Liemohn, Michael; Ganushkina, Natalia; De Zeeuw, Darren; Welling, Daniel; Toth, Gabor; Ilie, Raluca; Gombosi, Tamas; van der Holst, Bart; Kuznetsova, Maria; Maddox, Marlo; Rastaetter, Lutz

    2016-04-01

    Experimental real-time simulations of the Space Weather Modeling Framework (SWMF) are conducted at the Community Coordinated Modeling Center (CCMC), with results available there (http://ccmc.gsfc.nasa.gov/realtime.php), through the CCMC Integrated Space Weather Analysis (iSWA) site (http://iswa.ccmc.gsfc.nasa.gov/IswaSystemWebApp/), and the Michigan SWMF site (http://csem.engin.umich.edu/realtime). Presently, two configurations of the SWMF are running in real time at CCMC, both focusing on the geospace modules, using the BATS-R-US magnetohydrodynamic model, the Ridley Ionosphere Model, and with and without the Rice Convection Model for inner magnetospheric drift physics. While both have been running for several years, nearly continuous results are available since July 2015. Dst from the model output is compared against the Kyoto real-time Dst, in particular the daily minimum value of Dst to quantify the ability of the model to capture storms. Contingency tables are presented, showing that the run with the inner magnetosphere model is much better at reproducing storm-time values. For disturbances with a minimum Dst lower than -50 nT, this version yields a probability of event detection of 0.86 and a Heidke Skill Score of 0.60. In the other version of the SWMF, without the inner magnetospheric module included, the modeled Dst never dropped below -50 nT during the examined epoch.

  15. A comparison of experimental results of soot production in laminar premixed flames

    NASA Astrophysics Data System (ADS)

    Caetano, Nattan R.; Soares, Diego; Nunes, Roger P.; Pereira, Fernando M.; Smith Schneider, Paulo; Vielmo, Horácio A.; van der Laan, Flávio Tadeu

    2015-05-01

    Soot emission has been the focus of numerous studies due to the numerous applications in industry, as well as the harmful effects caused to the environment. Thus, the purpose of this work is to analyze the soot formation in a flat flame burner using premixed compressed natural gas and air, where these quasi-adiabatic flames have one-dimensional characteristics. The measurements were performed applying the light extinction technique. The air/fuel equivalence ratiowas varied to assess the soot volume fractions for different flame configurations. Soot production along the flamewas also analyzed by measurements at different heights in relation to the burner surface. Results indicate that soot volume fraction increases with the equivalence ratio. The higher regions of the flamewere analyzed in order to map the soot distribution on these flames. The results are incorporated into the experimental database for measurement techniques calibration and for computational models validation of soot formation in methane premixed laminar flames, where the equivalence ratio ranging from 1.5 up to 8.

  16. Preliminary experimental results of tungsten wire-array Z-pinches on primary test stand

    NASA Astrophysics Data System (ADS)

    Huang, Xian-Bin; Zhou, Shao-Tong; Dan, Jia-Kun; Ren, Xiao-Dong; Wang, Kun-Lun; Zhang, Si-Qun; Li, Jing; Xu, Qiang; Cai, Hong-Chun; Duan, Shu-Chao; Ouyang, Kai; Chen, Guang-Hua; Ji, Ce; Wei, Bing; Feng, Shu-Ping; Wang, Meng; Xie, Wei-Ping; Deng, Jian-Jun; Zhou, Xiu-Wen; Yang, Yi

    2015-07-01

    The Primary Test Stand (PTS) developed at the China Academy of Engineering Physics is a 20 TW pulsed power driver, which can deliver a ˜10 MA, 70 ns rise-time (10%-90%) current to a short-circuit load and has important applications in Z-pinch driven inertial confinement fusion and high energy density physics. Preliminary results of tungsten wire-array Z-pinch experiments on PTS are presented. The load geometries investigated include 15-mm-tall cylindrical single and nested arrays with diameter ranging from 13 mm to 30 mm, consisting of 132-300 tungsten wires with 5-10 μm in diameter. Multiple diagnostics were fielded to characterize the x-ray radiation from wire-array Z pinches. The x-ray peak power (˜50 TW) and total radiated energy (˜500 kJ) were obtained from a single 20-mm-diam array with 80-ns stagnation time. The highest x-ray peak power up to 80 TW with 2.4 ns FWHM was achieved by using a nested array with 20-mm outer diameter, and the total x-ray energy from the nested array is comparable to that of single array. Implosion velocity estimated from the time-resolved image measurement exceeds 30 cm/μs. The detailed experimental results and other findings are presented and discussed.

  17. Preliminary experimental results of tungsten wire-array Z-pinches on primary test stand

    SciTech Connect

    Huang, Xian-Bin; Zhou, Shao-Tong; Dan, Jia-Kun; Ren, Xiao-Dong Wang, Kun-Lun; Zhang, Si-Qun; Li, Jing; Xu, Qiang; Cai, Hong-Chun; Duan, Shu-Chao; Ouyang, Kai; Chen, Guang-Hua; Ji, Ce; Wei, Bing; Feng, Shu-Ping; Wang, Meng; Xie, Wei-Ping; Deng, Jian-Jun; Zhou, Xiu-Wen; Yang, Yi

    2015-07-15

    The Primary Test Stand (PTS) developed at the China Academy of Engineering Physics is a 20 TW pulsed power driver, which can deliver a ∼10 MA, 70 ns rise-time (10%–90%) current to a short-circuit load and has important applications in Z-pinch driven inertial confinement fusion and high energy density physics. Preliminary results of tungsten wire-array Z-pinch experiments on PTS are presented. The load geometries investigated include 15-mm-tall cylindrical single and nested arrays with diameter ranging from 13 mm to 30 mm, consisting of 132–300 tungsten wires with 5–10 μm in diameter. Multiple diagnostics were fielded to characterize the x-ray radiation from wire-array Z pinches. The x-ray peak power (∼50 TW) and total radiated energy (∼500 kJ) were obtained from a single 20-mm-diam array with 80-ns stagnation time. The highest x-ray peak power up to 80 TW with 2.4 ns FWHM was achieved by using a nested array with 20-mm outer diameter, and the total x-ray energy from the nested array is comparable to that of single array. Implosion velocity estimated from the time-resolved image measurement exceeds 30 cm/μs. The detailed experimental results and other findings are presented and discussed.

  18. Using the Viking biology experimental results to obtain chemical information about Martian regolith

    NASA Technical Reports Server (NTRS)

    Plumb, Robert C.

    1992-01-01

    Although initially formulated as biology experiments, most of the results produced by the Viking Labeled Release (LR), Gas Exchange (GEX), and Pyrolytic Release (PR) experiments have been reproduced by chemical means. The experiments do not need more study as 'biological' phenomena, but they do deserve much more careful consideration from a chemical viewpoint. They are the only 'wet-chemical' experiments that scientists have performed on another planet, but they have not found very general use as sources of scientific information. There is a large set of potentially useful chemical observations, e.g., the three resolvable and precisely measured kinetic components of the release of C-14-labeled gases, the thermal sensitivity and magnitudes of the oxidation reaction(s) of the LR experiments, the kinetics and magnitude of the O2 and CO2 release of the GEX experiments, the thermal sensitivity of the GEX results, the differences between the thermal sensitivity of the GEX and the thermal sensitivity of the LR responses, and the kinetics and magnitudes of the LR successive injection reabsorption effect. It should be possible to test many chemical aspects of hypothetical martian phenomena in experiments using the biology experimental configurations and derive much valuable information by comparisons with the Viking observations.

  19. Sodium Benzoate, a Food Additive and a Metabolite of Cinnamon, Modifies T Cells at Multiple Steps and Inhibits Adoptive Transfer of Experimental Allergic Encephalomyelitis1

    PubMed Central

    Brahmachari, Saurav; Pahan, Kalipada

    2007-01-01

    Experimental allergic encephalomyelitis (EAE) is the animal model for multiple sclerosis. This study explores a novel use of sodium benzoate (NaB), a commonly used food additive and a Food and Drug Administration-approved nontoxic drug for urea cycle disorders, in treating the disease process of relapsing-remitting EAE in female SJL/J mice. NaB, administered through drinking water at physiologically tolerable doses, ameliorated clinical symptoms and disease progression of EAE in recipient mice and suppressed the generation of encephalitogenic T cells in donor mice. Histological studies reveal that NaB effectively inhibited infiltration of mononuclear cells and demyelination in the spinal cord of EAE mice. Consequently, NaB also suppressed the expression of proinflammatory molecules and normalized myelin gene expression in the CNS of EAE mice. Furthermore, we observed that NaB switched the differentiation of myelin basic protein-primed T cells from Th1 to Th2 mode, enriched regulatory T cell population, and down-regulated the expression of various contact molecules in T cells. Taken together, our results suggest that NaB modifies encephalitogenic T cells at multiple steps and that NaB may have therapeutic importance in multiple sclerosis. PMID:17579047

  20. COMPARISON OF EXPERIMENTAL RESULTS TO CFD MODELS FOR BLENDING IN A TANK USING DUAL OPPOSING JETS

    SciTech Connect

    Leishear, R.

    2011-08-07

    Research has been completed in a pilot scale, eight foot diameter tank to investigate blending, using a pump with dual opposing jets. The jets re-circulate fluids in the tank to promote blending when fluids are added to the tank. Different jet diameters and different horizontal and vertical orientations of the jets were investigated. In all, eighty five tests were performed both in a tank without internal obstructions and a tank with vertical obstructions similar to a tube bank in a heat exchanger. These obstructions provided scale models of several miles of two inch diameter, serpentine, vertical cooling coils below the liquid surface for a full scale, 1.3 million gallon, liquid radioactive waste storage tank. Two types of tests were performed. One type of test used a tracer fluid, which was homogeneously blended into solution. Data were statistically evaluated to determine blending times for solutions of different density and viscosity, and the blending times were successfully compared to computational fluid dynamics (CFD) models. The other type of test blended solutions of different viscosity. For example, in one test a half tank of water was added to a half tank of a more viscous, concentrated salt solution. In this case, the fluid mechanics of the blending process was noted to significantly change due to stratification of fluids. CFD models for stratification were not investigated. This paper is the fourth in a series of papers resulting from this research (Leishear, et.al. [1- 4]), and this paper documents final test results, statistical analysis of the data, a comparison of experimental results to CFD models, and scale-up of the results to a full scale tank.

  1. Temporal and spectral evolution of a storage ring FEL source: Experimental results on Super-ACO and new theoretical approach

    SciTech Connect

    Hara, T.; Couprie, M.E. ||

    1995-12-31

    The Super-ACO FEL source in UV is now used for applications like a time-resolved fluorescence in biology and two colors experiments coupling FEL and Synchrotron Radiation, which are naturally synchronized. The stability of the FEL is then a critical issue for the users. Detailed experimental studies conducted on the temporal characteristics of the laser micropulse showed various phenomena, such as a longitudinal micropulse jitter and a deformation of a longitudinal micropulse distribution. A similar analysis has been performed on the laser spectral evolution with a scanning Fabry-Perot interferometer, showing a spectrum narrowing, and a wavelength drift. A longitudinal feedback system developed after the first user experiment, allowed to reduce significantly the longitudinal jitter, the intensity fluctuation and the spectral drift. Nevertheless, the stability of the FEL is very dependent on any perturbation, and the observed phenomena can not be described by former models like super-mode assuming a stationary regime. A new theoretical model has then been developed, in order to simulate dynamic behaviors. A simple iterative method is employed to obtain the laser spectrum. The access to the temporal distribution requires additional complexity, because the Fourier transformation has to be performed for each pass. The comparison between the experimental data and the simulation results will be given.

  2. Thermodiffusion in concentrated ferrofluids: Experimental and numerical results on magnetic thermodiffusion

    SciTech Connect

    Sprenger, Lisa Lange, Adrian; Odenbach, Stefan

    2014-02-15

    Ferrofluids consist of magnetic nanoparticles dispersed in a carrier liquid. Their strong thermodiffusive behaviour, characterised by the Soret coefficient, coupled with the dependency of the fluid's parameters on magnetic fields is dealt with in this work. It is known from former experimental investigations on the one hand that the Soret coefficient itself is magnetic field dependent and on the other hand that the accuracy of the coefficient's experimental determination highly depends on the volume concentration of the fluid. The thermally driven separation of particles and carrier liquid is carried out with a concentrated ferrofluid (φ = 0.087) in a horizontal thermodiffusion cell and is compared to equally detected former measurement data. The temperature gradient (1 K/mm) is applied perpendicular to the separation layer. The magnetic field is either applied parallel or perpendicular to the temperature difference. For three different magnetic field strengths (40 kA/m, 100 kA/m, 320 kA/m) the diffusive separation is detected. It reveals a sign change of the Soret coefficient with rising field strength for both field directions which stands for a change in the direction of motion of the particles. This behaviour contradicts former experimental results with a dilute magnetic fluid, in which a change in the coefficient's sign could only be detected for the parallel setup. An anisotropic behaviour in the current data is measured referring to the intensity of the separation being more intense in the perpendicular position of the magnetic field: S{sub T‖} = −0.152 K{sup −1} and S{sub T⊥} = −0.257 K{sup −1} at H = 320 kA/m. The ferrofluiddynamics-theory (FFD-theory) describes the thermodiffusive processes thermodynamically and a numerical simulation of the fluid's separation depending on the two transport parameters ξ{sub ‖} and ξ{sub ⊥} used within the FFD-theory can be implemented. In the case of a parallel aligned magnetic field, the parameter can

  3. Wire Array Z-pinches on Sphinx Machine: Experimental Results and Relevant Points of Microsecond Implosion Physics

    NASA Astrophysics Data System (ADS)

    Calamy, H.; Hamann, F.; Lassalle, F.; Bayol, F.; Mangeant, C.; Morell, A.; Huet, D.; Bedoch, J. P.; Chittenden, J. P.; Lebedev, S. V.; Jennings, C. A.; Bland, S. N.

    2006-01-01

    Centre d'Etudes de Gramat (France) has developed an efficient long implosion time (800 ns) Aluminum plasma radiation source (PRS). Based on the LTD technology, the SPHINX facility is developed as a 1-3MJ, 1μs rise time, 4-10 MA current driver. In this paper, it was used in 1MJ, 4MA configuration to drive Aluminum nested wire arrays Z-pinches with K-shell yield up to 20 kJ and a FWHM of the x-ray pulse of about 50 ns. We present latest SPHINX experiments and some of the main physic issues of the microsecond regime. Experimental setup and results are described with the aim of giving trends that have been obtained. The main features of microsecond implosion of wire arrays can be analyzed thanks to same methods and theories as used for faster Z-pinches. The effect of load polarity was examined. The stability of the implosion , one of the critical point of microsecond wire arrays due to the load dimensions imposed by the time scale, is tackled. A simple scaling from 100 ns Z-pinch results to 800 ns ones gives good results and the use of nested arrays improves dramatically the implosion quality and the Kshell yield of the load. However, additional effects such as the impact of the return current can geometry on the implosion have to be taken into account on our loads. Axial inhomogeneity of the implosion the origin of which is not yet well understood occurs in some shots and impacts the radiation output. The shape of the radiative pulse is discussed and compared with the homogeneity of the implosion. Numerical 2D R-Z and R-θ simulations are used to highlight some experimental results and understand the plasma conditions during these microsecond wire arrays implosions.

  4. Wire Array Z-pinches on Sphinx Machine: Experimental Results and Relevant Points of Microsecond Implosion Physics

    SciTech Connect

    Calamy, H.; Hamann, F.; Lassalle, F.; Bayol, F.; Mangeant, C.; Morell, A.; Huet, D.; Bedoch, J.P.; Chittenden, J.P.; Lebedev, S.V.; Jennings, C.A.; Bland, S.N.

    2006-01-05

    Centre d'Etudes de Gramat (France) has developed an efficient long implosion time (800 ns) Aluminum plasma radiation source (PRS). Based on the LTD technology, the SPHINX facility is developed as a 1-3MJ, 1{mu}s rise time, 4-10 MA current driver. In this paper, it was used in 1MJ, 4MA configuration to drive Aluminum nested wire arrays Z-pinches with K-shell yield up to 20 kJ and a FWHM of the x-ray pulse of about 50 ns. We present latest SPHINX experiments and some of the main physic issues of the microsecond regime. Experimental setup and results are described with the aim of giving trends that have been obtained. The main features of microsecond implosion of wire arrays can be analyzed thanks to same methods and theories as used for faster Z-pinches. The effect of load polarity was examined. The stability of the implosion , one of the critical point of microsecond wire arrays due to the load dimensions imposed by the time scale, is tackled. A simple scaling from 100 ns Z-pinch results to 800 ns ones gives good results and the use of nested arrays improves dramatically the implosion quality and the Kshell yield of the load. However, additional effects such as the impact of the return current can geometry on the implosion have to be taken into account on our loads. Axial inhomogeneity of the implosion the origin of which is not yet well understood occurs in some shots and impacts the radiation output. The shape of the radiative pulse is discussed and compared with the homogeneity of the implosion. Numerical 2D R-Z and R-{theta} simulations are used to highlight some experimental results and understand the plasma conditions during these microsecond wire arrays implosions.

  5. Flow reference method testing and analysis: Wind tunnel experimental results. Volume 1

    SciTech Connect

    1997-02-01

    This report describes the results of wind tunnel tests that the US Environmental Protection Agency (EPA) conducted in 1997 as part of a major study to evaluate potential improvements to Method 2, EPA`s test method for measuring flue gas volumetric flow in stacks. Conducted in the Merrill Subsonic Wind Tunnel at North Carolina State University in Raleigh, the wind tunnel tests were designed to evaluate how accurately various probes can measure angles and velocity of flow under prescribed conditions and, additionally, to calibrate the probes for use in planned field experiments. To provide a basis for selecting probes for subsequent field tests, the wind tunnel testing was performed over a range of velocity, pitch, and yaw angle settings approximating the conditions encountered at actual utility sites.

  6. Experimental and simulation study results for video landmark acquisition and tracking technology

    NASA Technical Reports Server (NTRS)

    Schappell, R. T.; Tietz, J. C.; Thomas, H. M.; Lowrie, J. W.

    1979-01-01

    A synopsis of related Earth observation technology is provided and includes surface-feature tracking, generic feature classification and landmark identification, and navigation by multicolor correlation. With the advent of the Space Shuttle era, the NASA role takes on new significance in that one can now conceive of dedicated Earth resources missions. Space Shuttle also provides a unique test bed for evaluating advanced sensor technology like that described in this report. As a result of this type of rationale, the FILE OSTA-1 Shuttle experiment, which grew out of the Video Landmark Acquisition and Tracking (VILAT) activity, was developed and is described in this report along with the relevant tradeoffs. In addition, a synopsis of FILE computer simulation activity is included. This synopsis relates to future required capabilities such as landmark registration, reacquisition, and tracking.

  7. High energy cosmic ray physics with underground muons in MACRO. I. Analysis methods and experimental results

    SciTech Connect

    Bellotti, R.; Cafagna, F.; Calicchio, M.; Castellano, M.; De Cataldo, G.; De Marzo, C.; Erriquez, O.; Favuzzi, C.; Fusco, P.; Giglietto, N.; Guarnaccia, P.; Mazziotta, M.N.; Montaruli, T.; Raino, A.; Spinelli, P.; Cecchini, S.; Dekhissi, H.; Fantini, R.; Giacomelli, G.; Mandrioli, G.; Margiotta-Neri, A.; Patrizii, L.; Popa, V.; Serra-Lugaresi, P.; Spurio, M.; Togo, V.; Hong, J.T.; Kearns, E.; Okada, C.; Orth, C.; Stone, J.L.; Sulak, L.R.; Barish, B.C.; Goretti, M.; Katsavounidis, E.; Kyriazopoulou, S.; Michael, D.G.; Nolty, R.; Peck, C.W.; Scholberg, K.; Walter, C.W.; Lane, C.; Steinberg, R.; Battistoni, G.; Bilokon, H.; Bloise, C.; Carboni, M.; Chiarella, V.; Forti, C.; Iarocci, E.; Marini, A.; Patera, V.; Ronga, F.; Satta, L.; Sciubba, A.; Spinetti, M.; Valente, V.; Antolini, R.; Bosio, T.; Di Credico, A.; Grillo, A.; Gustavino, C.; Mikheyev, S.; Parlati, S.; Reynoldson, J.; Scapparone, E.; Bower, C.; Habig, A.; Hawthorne, A.; Heinz, R.; Miller, L.; Mufson, S.; Musser, J.; De Mitri, I.; Monacelli, P.; Bernardini, P.; Mancarella, G.; Martello, D.; Palamara, O.; Petrera, S.; Pistilli, P.; Ricciardi, M.; Surdo, A.; Baker, R.; and others

    1997-08-01

    In this paper, the first of a two-part work, we present the reconstruction and measurement of muon events detected underground by the MACRO experiment at Gran Sasso (E{sub {mu}}{ge} 1.3 TeV in atmosphere). The main aim of this work is to discuss the muon multiplicity distribution as measured in the detector. The data sample analyzed consists of 4.4{times}10{sup 6} muon events, of which {approximately} 263000 are multiple muons, corresponding to a total live time of 5850 h. In this sample, the observed multiplicities extend above N{sub {mu}}=35, with intermuon separations up to 50 m and beyond. Additional complementing measurements, such as the inclusive muon flux, the angular distribution, and the muon separation distribution (decoherence), are also included. The physical interpretation of the results presented here is reported in the following companion paper. {copyright} {ital 1997} {ital The American Physical Society}

  8. Comparison of selected theoretical models of bubble formation and experimental results

    NASA Astrophysics Data System (ADS)

    Rząsa, Mariusz R.

    2014-06-01

    Designers of all types of equipment applied in oxygenation and aeration need to get to know the mechanism behind the gas bubble formation. This paper presents a measurement method used for determination of parameters of bubbles forming at jet attachment from which the bubles are displaced upward. The measuring system is based on an optical tomograph containing five projections. An image from the tomograph contains shapes of the forming bubbles and determine their volumes and formation rate. Additionally, this paper presents selected theoretical models known from literature. The measurement results have been compared with simple theoretical models predictions. The paper also contains a study of the potential to apply the presented method for determination of bubble structures and observation of intermediate states.

  9. Modal characterization of the ASCIE segmented optics testbed: New algorithms and experimental results

    NASA Technical Reports Server (NTRS)

    Carrier, Alain C.; Aubrun, Jean-Noel

    1993-01-01

    New frequency response measurement procedures, on-line modal tuning techniques, and off-line modal identification algorithms are developed and applied to the modal identification of the Advanced Structures/Controls Integrated Experiment (ASCIE), a generic segmented optics telescope test-bed representative of future complex space structures. The frequency response measurement procedure uses all the actuators simultaneously to excite the structure and all the sensors to measure the structural response so that all the transfer functions are measured simultaneously. Structural responses to sinusoidal excitations are measured and analyzed to calculate spectral responses. The spectral responses in turn are analyzed as the spectral data become available and, which is new, the results are used to maintain high quality measurements. Data acquisition, processing, and checking procedures are fully automated. As the acquisition of the frequency response progresses, an on-line algorithm keeps track of the actuator force distribution that maximizes the structural response to automatically tune to a structural mode when approaching a resonant frequency. This tuning is insensitive to delays, ill-conditioning, and nonproportional damping. Experimental results show that is useful for modal surveys even in high modal density regions. For thorough modeling, a constructive procedure is proposed to identify the dynamics of a complex system from its frequency response with the minimization of a least-squares cost function as a desirable objective. This procedure relies on off-line modal separation algorithms to extract modal information and on least-squares parameter subset optimization to combine the modal results and globally fit the modal parameters to the measured data. The modal separation algorithms resolved modal density of 5 modes/Hz in the ASCIE experiment. They promise to be useful in many challenging applications.

  10. Cessation of environmentally-assisted cracking in a low-alloy steel: Experimental results

    SciTech Connect

    Li, Y.Y.

    1997-01-01

    The presence of dissolved metallurgical sulfides in pressure vessel and piping steels has been linked to Environmentally-Assisted Cracking (EAC), a phenomenon observed in laboratory tests that results in fatigue crack growth rates as high as 100 times that in air. Previous experimental and analytical work based on diffusion as the mass transport process has shown that surface cracks that are initially clean of sulfides will not initiate EAC in most applications. This is because the average crack tip velocity would not be sufficiently high to expose enough metallurgical sulfides per unit time and produce the sulfide concentration required for EAC. However, there is a potential concern for the case of a relatively large embedded crack breaking through to the wetted surface. Such a crack would not be initially clean of sulfides, and EAC could initiate. This paper presents the results of a series of experiments conducted on two heats of an EAC susceptible, high-sulfur, low-alloy steel in 243{degrees}C low-oxygen water to further study the phenomenon of EAC persistence at low crack tip velocities. A load cycle profile that incorporated a significant load dwell period at minimum load was used. In one experiment, the fatigue cycling history was such that relatively high crack tip velocities at the start of the experiment produced a persistent case of EAC even when crack tip velocities were later reduced to levels below the EAC initiation velocity. The other series of experiments used initial crack tip velocities that were much lower and probably more realistic. Air precracking of the compact tension specimens produced an initial inventory of undissolved sulfides on the crack flanks that directly simulates the array of sulfides expected from the breakthrough of an embedded crack. In all cases, results showed EAC ceased after several hundred hours of cycling.

  11. Changes in lipid composition of Escherichia coli resulting from growth with organic solvents and with food additives.

    PubMed Central

    Ingram, L O

    1977-01-01

    Cells of Escherichia coli contain an altered fatty acid and phospholipid composition when grown in the presence of sublethal concentrations of a variety of organic solvents and food additives. The diversity of compounds examined which caused these changes indicates that no single catabolic pathway is involved. Many of the observed changes are consistent with the hypothesis that cells adapt their membrane lipids to compensate for the presence of these compounds in the environment. Both sodium benzoate and calcium propionate caused the synthesis of unusual fatty acids. PMID:327934

  12. Heating stents with radio frequency energy to prevent tumor ingrowth: modeling and experimental results

    NASA Astrophysics Data System (ADS)

    Ryan, Thomas P.; Lawes, Kate; Goldberg, S. Nahum

    1998-04-01

    Stents are often inserted into internal orifices to treat blockage due to tumor ingrowth. Stents are favored due to their minimally invasive nature, possible avoidance of a surgical procedure, and their ability to palliate surgically non-resectable disease. Because of rapid tumor growth however, a treatment means to prevent overgrowth through the stent and resultant blockage is required. To further this goal, experiments were performed in which a stent was placed in tissue and heated with radiofrequency (RF) energy to coagulate a cylinder of tissue, thereby eradicating viable tissue in the proximity of the stent. Temperatures were measured at the central stent surface and edges over time during a 5 - 10 minute heating in phantom and in fresh tissue. In addition, a finite element model was used to simulate the electric field and temperature distribution. Blood flow was also introduced in the model by evaluating RF application to stents to determine effectiveness of the energy applications. Changing perfusion and tissue electrical conductivity as a function of temperature was applied as the tissue was heated to 100 degree(s)C. Results from the electric field model will be shown as well as the thermal distribution over time from the simulations. Lastly, results from the damage integral will be discussed.

  13. Rheology of cross-linked polymers and polymer foams: Theory and experimental results

    NASA Astrophysics Data System (ADS)

    Herman, John N.

    Typical polymers have a time-dependent response to loading which results in stress relaxation or creep. Models using springs/dashpots or Volterra integrals are capable of predicting the material response, but place little or no emphasis on the reasoning behind the response. This research proposes a microscopic reasoning behind polymer chain movement, while developing a model to predict the creep and stress relaxation of a polymer foam. Based on the theorized slip/stick of polymer chains as they slide past each other, this model successfully predicts the behavior of a PMI polymer foam under tensile loads. This model lends insights into polymer microscopic behavior, which may be used for the development of future polymer materials. When possible, industry standard test methods are used to obtain tensile creep and stress relaxation results from rectangular specimens of Rohacell 31 IG foam. A common set of material parameters is fitted to the data, validating the micromechanic reasoning to polymer chain movement. To gain insight into observed test result variability, an investigation of the elastic modulus and material density relationship is performed using nominal foam densities of 31 kg/m3, 51 kg/m3,, 71 kg/m3. Additional testing and modeling is performed to validate the model under load/partial-unload/ hold, load/unload/recovery, and load/instantaneous-unload test cycles. The model successfully captures the observed material nuances during these more complex loading cycles.

  14. Experimental Results from the Thermal Energy Storage-2 (TES-2) Flight Experiment

    NASA Technical Reports Server (NTRS)

    Tolbert, Carol

    2000-01-01

    Thermal Energy Storage-2 (TES-2) is a flight experiment that flew on the Space Shuttle Endeavour (STS-72), in January 1996. TES-2 originally flew with TES-1 as part of the OAST-2 Hitchhiker payload on the Space Shuttle Columbia (STS-62) in early 1994. The two experiments, TES-1 and TES-2 were identical except for the fluoride salts to be characterized. TES-1 provided data on lithium fluoride (LiF), TES-2 provided data on a fluoride eutectic (LiF/CaF2). Each experiment was a complex autonomous payload in a Get-Away-Special payload canister. TES-1 operated flawlessly for 22 hr. Results were reported in a paper entitled, Effect of Microgravity on Materials Undergoing Melting and Freezing-The TES Experiment, by David Namkoong et al. A software failure in TES-2 caused its shutdown after 4 sec of operation. TES-1 and 2 were the first experiments in a four experiment suite designed to provide data for understanding the long duration microgravity behavior of thermal energy storage salts that undergo repeated melting and freezing. Such data have never been obtained before and have direct application for the development of space-based solar dynamic (SD) power systems. These power systems will store energy in a thermal energy salt such as lithium fluoride or a eutectic of lithium fluoride/calcium difluoride. The stored energy is extracted during the shade portion of the orbit. This enables the solar dynamic power system to provide constant electrical power over the entire orbit. Analytical computer codes were developed for predicting performance of a space-based solar dynamic power system. Experimental verification of the analytical predictions were needed prior to using the analytical results for future space power design applications. The four TES flight experiments were to be used to obtain the needed experimental data. This paper will address the flight results from the first and second experiments, TES-1 and 2, in comparison to the predicted results from the Thermal

  15. Active behavior of abdominal wall muscles: Experimental results and numerical model formulation.

    PubMed

    Grasa, J; Sierra, M; Lauzeral, N; Muñoz, M J; Miana-Mena, F J; Calvo, B

    2016-08-01

    In the present study a computational finite element technique is proposed to simulate the mechanical response of muscles in the abdominal wall. This technique considers the active behavior of the tissue taking into account both collagen and muscle fiber directions. In an attempt to obtain the computational response as close as possible to real muscles, the parameters needed to adjust the mathematical formulation were determined from in vitro experimental tests. Experiments were conducted on male New Zealand White rabbits (2047±34g) and the active properties of three different muscles: Rectus Abdominis, External Oblique and multi-layered samples formed by three muscles (External Oblique, Internal Oblique, and Transversus Abdominis) were characterized. The parameters obtained for each muscle were incorporated into a finite strain formulation to simulate active behavior of muscles incorporating the anisotropy of the tissue. The results show the potential of the model to predict the anisotropic behavior of the tissue associated to fibers and how this influences on the strain, stress and generated force during an isometric contraction. PMID:27111629

  16. The dependence of ultrasonic backscatter on trabecular thickness in human calcaneus: theoretical and experimental results.

    PubMed

    Wear, Keith A; Laib, Andres

    2003-08-01

    Trabecular thickness within cancellous bone is an important determinant of osteoporotic fracture risk. Noninvasive assessment of trabecular thickness potentially could yield useful diagnostic information. Faran's theory of elastic scattering from a cylindrical object immersed in a fluid has been used to predict the dependence of ultrasonic backscatter on trabecular thickness. The theory predicts that, in the range of morphological and material properties expected for trabecular bone, the backscatter coefficient at 500 kHz should be approximately proportional to trabecular thickness to the power of 2.9. Experimental measurements of backscatter coefficient were performed on 43 human calcaneus samples in vitro. Mean trabecular thicknesses on the 43 samples were assessed using micro computed tomography (CT). A power law fit to the data showed that the backscatter coefficient empirically varied as trabecular thickness to the 2.8 power. The 95% confidence interval for this exponent was 1.7 to 3.9. The square of the correlation coefficient for the linear regression to the log transformed data was 0.40. This suggests that 40% of variations in backscatter may be attributed to variations in trabecular thickness. These results reinforce previous studies that offered validation for the Faran cylinder model for prediction of scattering properties of cancellous bone, and provide added evidence for the potential diagnostic utility of the backscatter measurement. PMID:12952089

  17. First Experimental Results with a New Type of Stent: The Double-Coil Device

    SciTech Connect

    Strecker, Ernst-Peter Song, Ho-Young; Kang, Sung-Gwon; Hou Dongming; Schumacher, M.

    2003-06-15

    Purpose: To introduce a new stent design and evaluate its technical properties. Methods: This stent consists of two nitinol wires partially connected to each other.After delivery through a catheter a tube-like helical stent forms within the artery. After experimental tests in flow models regarding mechanical properties, introduction and delivery technique, 15 stents were implanted into iliac, femoral, and carotid arteries of seven dogs.After 3-12 weeks angiographic follow-up stents were explanted for microscopic examination. Results: Stents with expanded diameters of 5-10 mm can be introduced through a 5 Fr catheter with 0.038 inch luminal diameter. Thrombotic vessel occlusion was observed in one iliac artery after incorrect stent placement with diameter mismatch. Fourteen of 15 stents remained patent and revealed minor intimal hyperplasia in the areas of the stent strut connection points as well as some reduction in medial thickness. Conclusion: This new stent design has a small introduction diameter which is independent of the expanded diameter. The stent's principal characteristics may serve as a basis for further special developments.

  18. Two-dimensional discrete element models of debris avalanches: Parameterization and the reproducibility of experimental results

    NASA Astrophysics Data System (ADS)

    Banton, J.; Villard, P.; Jongmans, D.; Scavia, C.

    2009-11-01

    Application of the discrete element method (DEM) to model avalanches of granular materials requires determining the correct geometric and rheological parameters for and between the particles as well as for the basal surface. The use of spherical (circular in 2-D) particles enhances particle rolling, yielding excessive runout values. The solution usually adopted to correct this effect is to introduce a drag force which artificially slows down the particle velocities. The aim of this study is to test the capability of the DEM to simulate well-controlled unsteady channelized granular flows, considering the measured properties of the particles and of the basal surface which naturally contribute to dissipate energy. We first performed a parametrical analysis on a simple 2-D model in order to estimate the influence of particle shape, friction parameters, and restitution coefficients on the dynamics of the flow and on the deposit geometry. We then simulated three channelized laboratory experiments performed with two materials and two bed linings. Using the geometrical layout and the values of the mechanical parameters provided by the authors, we obtained a remarkable agreement between the observed and 2-D simulated deposit shapes for the three experiments. Also, the computed mass evolution with time was very consistent with the experimental snapshots in all cases. These results highlight the capability of the DEM technique for modeling avalanche of granular material when the particle shape as well as the friction and restitution coefficients are properly considered.

  19. Inhibiting diffusion of complex contagions in social networks: theoretical and experimental results

    PubMed Central

    Anil Kumar, V.S.; Marathe, Madhav V.; Ravi, S.S.; Rosenkrantz, Daniel J.

    2014-01-01

    We consider the problem of inhibiting undesirable contagions (e.g. rumors, spread of mob behavior) in social networks. Much of the work in this context has been carried out under the 1-threshold model, where diffusion occurs when a node has just one neighbor with the contagion. We study the problem of inhibiting more complex contagions in social networks where nodes may have thresholds larger than 1. The goal is to minimize the propagation of the contagion by removing a small number of nodes (called critical nodes) from the network. We study several versions of this problem and prove that, in general, they cannot even be efficiently approximated to within any factor ρ ≥ 1, unless P = NP. We develop efficient and practical heuristics for these problems and carry out an experimental study of their performance on three well known social networks, namely epinions, wikipedia and slashdot. Our results show that these heuristics perform significantly better than five other known methods. We also establish an efficiently computable upper bound on the number of nodes to which a contagion can spread and evaluate this bound on many real and synthetic networks. PMID:25750583

  20. Experimental results on the thermal contact resistance of G-10CR composites at cryogenic temperatures

    SciTech Connect

    Phelan, P.E.; Mei, S.

    1999-07-01

    The composite material G-10CR, an epoxy resin laminate reinforced with glass filaments, is widely used in cryogenic structures, especially where thermal insulation is required. The thermal contact resistance, or its inverse, the thermal contact conductance, at a G-10CR/G-10CR interface has not previously been investigated at cryogenic temperatures. Consequently, an experimental apparatus was designed and constructed to permit measurements of the thermal contact conductance over a temperature range from 10 to 300 K, while enabling a controlled contact pressure to be applied. Such measurements for these composite materials indicated that the fiber orientation, plays a crucial role in determining the thermal contact conductance, which is greatest in the warp direction, where the glass fibers offer a high-thermal-conductance path for heat flow in parallel to the epoxy matrix. Typical results demonstrating the effect of fiber orientation on thermal contact conductance are displayed. The dimensionless contact conductance was shown to vary with dimensionless contact pressure with a power-law exponent near 0.28, in broad agreement with other data reported for graphite fiber composites.

  1. Male physical aggression as a function of alcohol intoxication and frustration: experimental results and methodological considerations.

    PubMed

    Gustafson, R

    1991-03-01

    Forty-five undergraduate students were assigned to either an Alcohol, a Placebo, or a Control group. The alcohol dose was 0.80 g of 100% alcohol/kg body weight. Subjects were informed that they could win a sum of money depending on the performance of a partner. They then supervised the partner over a series of trials on a visual scan test and could influence the partner by either giving an uncomfortable electric shock (aggressive alternative) or a comfortable vibration (nonaggressive alternative) at each incorrect response from the partner. Both alternatives were said to be equally instrumental in reaching the goal of winning the money and both could be varied in intensity on a 10-point scale and without limits in terms of duration. Aggression was measured as number of aggressive responses chosen, and in terms of intensity and duration. Nonaggression was measured in terms of intensity and duration. Intoxicated subjects did not increase their aggression but all groups chose significantly more nonaggressive responses and did so with higher intensity and duration. Frustration did not significantly affect these types of responding. Results are discussed in terms of methodological considerations and the importance of using realistic experimental paradigms is stressed. Also, theoretical implications are discussed. PMID:2058788

  2. Experimental Results From a 2kW Brayton Power Conversion Unit

    NASA Technical Reports Server (NTRS)

    Hervol, David; Mason, Lee; Birchenough, Arthur

    2003-01-01

    This paper presents experimental test results from operation of a 2 kWe Brayton power conversion unit. The Brayton converter was developed for a solar dynamic power system flight experiment planned for the Mir Space Station in 1997. The flight experiment was cancelled, but the converter was tested at Glenn Research Center as part of the Solar Dynamic Ground Test Demonstration system which included a solar concentrator, heat receiver, and space radiator. In preparation for the current testing, the heat receiver was removed and replaced with an electrical resistance heater, simulating the thermal input of a steady-state nuclear source. The converter was operated over a full range of thermal input power levels and rotor speeds to generate an overall performance map. The converter unit will serve as the centerpiece of a Nuclear Electric Propulsion Testbed at Glenn. Future potential uses for the Testbed include high voltage electrical controller development, integrated electric thruster testing and advanced radiator demonstration testing to help guide high power Brayton technology development for Nuclear Electric Propulsion (NEP).

  3. Optimal piezoelectric beam shape for single and broadband vibration energy harvesting: Modeling, simulation and experimental results

    NASA Astrophysics Data System (ADS)

    Muthalif, Asan G. A.; Nordin, N. H. Diyana

    2015-03-01

    Harvesting energy from the surroundings has become a new trend in saving our environment. Among the established ones are solar panels, wind turbines and hydroelectric generators which have successfully grown in meeting the world's energy demand. However, for low powered electronic devices; especially when being placed in a remote area, micro scale energy harvesting is preferable. One of the popular methods is via vibration energy scavenging which converts mechanical energy (from vibration) to electrical energy by the effect of coupling between mechanical variables and electric or magnetic fields. As the voltage generated greatly depends on the geometry and size of the piezoelectric material, there is a need to define an optimum shape and configuration of the piezoelectric energy scavenger. In this research, mathematical derivations for unimorph piezoelectric energy harvester are presented. Simulation is done using MATLAB and COMSOL Multiphysics software to study the effect of varying the length and shape of the beam to the generated voltage. Experimental results comparing triangular and rectangular shaped piezoelectric beam are also presented.

  4. Optimization of MCAO performances: experimental results on ONERA laboratory MCAO bench

    NASA Astrophysics Data System (ADS)

    Costille, Anne; Petit, Cyril; Conan, Jean-Marc; Fusco, Thierry; Kulcsár, Caroline; Raynaud, Henri-François

    2008-07-01

    Classic Adaptive Optics (AO) is now a proven technique to correct turbulence on earth based astronomical telescopes. The corrected field of view is however limited by the anisoplanatism effect. Multi-Conjugate AO (MCAO) aims at providing a wide field of view correction through the use of several deformable mirrors and of multi-guide-star wavefront sensing. However the performance optimization of such complex systems raises new questions in terms of calibration and control. We present our current developments on performance optimization of MCAO systems. We show that performance can be significantly improved with tomographic control based on Linear Quadratic Gaussian control, compared with more standard methods. An experimental demonstration of this new approach is going to be implemented on HOMER, the recent bench developed at ONERA devoted to MCAO laboratory research. We present here results in closed-loop in AO, GLAO and MCAO with an integrator control. This bench implements two deformable mirrors and a wide field Shack-Hartman wavefront sensor.

  5. Experimental Results of High Pressure and High Strain Rate Tantalum Flow Stress on Omega and NIF

    NASA Astrophysics Data System (ADS)

    Park, Hye-Sook; Arsenlis, A.; Barton, N.; Benedetti, L.; Huntington, C.; McNaney, J.; Orlikowski, D.; Prisbrey, S.; Remington, B.; Rudd, R.; Swift, D.; Weber, S.; Wehrenberg, C.; Comley, A.

    2015-11-01

    Understanding the high pressure, high strain rate plastic deformation dynamics of materials is an area of research of high interest to planetary formation dynamics, meteor impact dynamics, and inertial confinement fusion designs. Developing predictive theoretical and computational descriptions of such systems, however, has been a difficult undertaking. We have performed many experiments on Omega, LCLS and NIF to test Ta strength models at high pressures (~ up to 4 Mbar), high strain rates (~ 107 s-1) and high strains (>30%) under ramped compression conditions using Rayleigh-Taylor and Richtmyer-Meshkov instability properties. These experiments use plasma drive to ramp compress the sample to higher pressure without shock-melting. We also studied lattice level strength mechanisms under shocked compression using a diffraction-based technique. Our studies show that the strength mechanisms from macro to micro scales are different from the traditional strength model predictions and that they are loading path dependent. We will report the experimental results. Work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA273.

  6. Preparation, conduct, and experimental results of the AVR loss-of-coolant accident simulation test

    SciTech Connect

    Kruger, K.; Bergerfurth, A.; Burger, S.; Pohl, P.; Wimmers, M. ); Cleveland, J.C. )

    1991-02-01

    A loss-of-coolant accident (LOCA) is one of the most severe accidents for a nuclear power plant. To demonstrate inherent safety characteristics incorporated into small high-temperature gas-cooled reactor (HTGR) design, LOCA simulation tests have been conducted at the Arbeitsgemeinschaft Versuchsreaktor (AVR), the German pebble-bed-high-temperature reactor plant. The AVR is the only nuclear power plant ever to have been intentionally subjected to LOCA conditions without emergency cooling. This paper presents the planning and licensing activities including pretest predictions performed for the LOCA test are described, and the conduct of the test and experimental results. The LOCA test was planned to create conditions that would exist if a rapid LOCA occurred with the reactor operating at full power. The test demonstrated this reactor's safe response to an accident in which the coolant escapes from the reactor core and no emergency system is available to provide coolant flow to the core. The test is of special interest because it demonstrates the inherent safety features incorporated into optimized modular HTGR designs. The main LOCA test lasted for 5 days. After the test began, core temperatures increased for {approx}13 h and then gradually and continually decreased as the rate of heat dissipation from the core exceeded the simulated decay power. Throughout the test, temperatures remained below limiting values for the core and other reactor components.

  7. Vibrational reduction in integral-damped composite fan blades: experimental results

    NASA Astrophysics Data System (ADS)

    Kosmatka, John B.; Mehmed, Oral

    1998-06-01

    The experimental behavior of spinning laminated composite pretwisted plates (turbo-fan blade-like) with small (less than 10% by volume) integral viscoelastic damping patches is investigated. Two different plate sets were examined. The first set investigated tailoring patch locations and definitions to damp specific modes on spinning flat graphite/epoxy plates as a function of rotational speed. The second set investigated damping patch size and location on specific modes of pretwisted (30 degrees) graphite/epoxy plates. The results reveal that: (1) significant amount of damping can be added using a small amount of damping material, (2) the damped plates experienced no failures up to the tested 28,000 g's and 750,000 cycles, (3) centrifugal loads caused an increase in bending frequencies and corresponding reductions in bending damping levels that are proportional to the bending stiffness increase, and (4) the centrifugal loads caused a decrease in torsion natural frequency and increase in damping levels of pretwisted composite plates.

  8. Experimental results performed in the framework of the HIPER European Project

    NASA Astrophysics Data System (ADS)

    Batani, D.; Koenig, M.; Baton, S.; Perez, F.; Gizzi, L. A.; Koester, P.; Labate, L.; Honrubia, J.; Debayle, A.; Santos, J.; Schurtz, G.; Hulin, S.; Ribeyre, X.; Fourment, C.; Nicolai, P.; Vauzour, B.; Gremillet, L.; Nazarov, W.; Pasley, J.; Tallents, G.; Richetta, M.; Lancaster, K.; Spindloe, Ch.; Tolley, M.; Neely, D.; Norreys, P.; Kozlova, M.; Nejdl, J.; Rus, B.; Antonelli, L.; Morace, A.; Volpe, L.,; Davies, J.; Wolowski, J.; Badziak, J.

    2011-06-01

    This paper presents the goals and some of the results of experiments conducted within the Working Package 10 (Fusion Experimental Programme) of the HiPER Project. These experiments concern the study of the physics connected to "Advanced Ignition Schemes", i.e. the Fast Ignition and the Shock Ignition Approaches to Inertial Fusion. Such schemes are aimed at achieving a higher gain, as compared to the classical approach which is used in NIF, as required for future reactors, and making fusion possible with smaller facilities. In particular, a series of experiments related to Fast Ignition were performed at the RAL (UK) and LULI, France) Laboratories and were addressed to study the propagation of fast electrons (created by a short-pulse ultra-high-intensity beam) in compressed matter, created either by cylindrical implosions or by compression of planar targets by (planar) laser-driven shock waves. A more recent experiment was performed at PALS and investigated the laser-plasma coupling in the 1016 W/cm2 intensity regime of interest for Shock Ignition.

  9. Non-Shock Initiation Model for Plastic Bonded Explosive PBXN-5 and Cast Explosive: Experimental Results

    NASA Astrophysics Data System (ADS)

    Anderson, Mark; Todd, Steven; Caipen, Terry; Jensen, Charlie; Hughs, Chance

    2009-06-01

    A damage initiated reaction (DMGIR) computational model is being developed for the CTH shock physics code to predict the response of an explosive to non-shock mechanical insults. The distinguishing feature of this model is the introduction of a damage variable, which relates the evolution of damage to the initiation of reaction in the explosive, and its growth to detonation. The DMGIR model is a complement to the History Variable Reactive Burn (HVRB) model embedded in the current CTH code. Specifically designed experiments are supporting the development, implementation, and validation of the DMGIR numerical approach. PBXN-5 was the initial explosive material used experimentally to develop the DMGIR model. This explosive represents a family of plastically bonded explosives with good mechanical strength and rigid body properties. The model has been extended to cast explosives represented by Composition B. Furthermore, the DMGIR model will extended to predict results of non-shock mechanical insults for moldable plastic explosives such as C4 and PrimaSheet.

  10. First Experimental Results Using Sparse Aperture Mask for Low Order Wavefront Sensing

    NASA Astrophysics Data System (ADS)

    Subedi, Hari; Zimmerman, Neil T.; Kasdin, N. Jeremy; Eldorado Riggs, A. J.

    2016-01-01

    We can determine the existence of life outside of earth by analyzing the spectra of exoplanets. Such direct imaging will provide the capability to thoroughly characterize an exoplanet's atmosphere. Direct imaging of exoplanets, however, has many technical challenges and difficulties: scattering and diffraction of light and the large difference in contrast, which is the ratio of brightness between the bright star and the dimmer planet. A coronagraph is an optical device that manipulates the diffraction of starlight and creates a region of high contrast (dark hole) where the dimmer planets can be seen. While in principle the level of contrast required for direct imaging of exoplanets can be achieved by stellar coronagraphic imaging, the resulting dark hole is highly sensitive to phase aberrations. In order to effectively suppress starlight for exoplanet imaging applications, low-order wavefront aberrations entering a coronagraph such as tip-tilt, defocus and coma must be determined and compensated for. A sparse-aperture mask (SAM) can be integrated in the telescopic imaging system to make precise estimate of low-order wavefront aberrations. In this technique, the starlight rejected by the coronagraph's focal plane stop is collimated to a relay pupil, where the mask forms an interference fringe pattern on a detector and the phase aberrations are inferred from this fringe pattern. At Princeton's High Contrast Imaging Lab (HCIL), we have numerically proved this concept and we are currently working on verifying it experimentally.

  11. Experimental results from a preclinical X-ray phase-contrast CT scanner

    PubMed Central

    Tapfer, Arne; Bech, Martin; Velroyen, Astrid; Meiser, Jan; Mohr, Jürgen; Walter, Marco; Schulz, Joachim; Pauwels, Bart; Bruyndonckx, Peter; Liu, Xuan; Sasov, Alexander; Pfeiffer, Franz

    2012-01-01

    To explore the future clinical potential of improved soft-tissue visibility with grating-based X-ray phase contrast (PC), we have developed a first preclinical computed tomography (CT) scanner featuring a rotating gantry. The main challenge in the transition from previous bench-top systems to a preclinical scanner are phase artifacts that are caused by minimal changes in the grating alignment during gantry rotation. In this paper, we present the first experimental results from the system together with an adaptive phase recovery method that corrects for these phase artifacts. Using this method, we show that the scanner can recover quantitatively accurate Hounsfield units in attenuation and phase. Moreover, we present a first tomography scan of biological tissue with complementary information in attenuation and phase contrast. The present study hence demonstrates the feasibility of grating-based phase contrast with a rotating gantry for the first time and paves the way for future in vivo studies on small animal disease models (in the mid-term future) and human diagnostics applications (in the long-term future). PMID:23019354

  12. Experimental results using a nonlinear extension of the minimum average correlation energy (MACE) filter

    NASA Astrophysics Data System (ADS)

    Fisher, John W., III; Principe, Jose C.

    1995-03-01

    The minimum average correlation energy filter (MACE) filter has been shown to have superior performance for rejecting out of class inputs in pattern recognition applications. The MACE filter exhibits a sharp correlation peak at a specified location in the output plane and low correlation energy elsewhere. It has also been shown that the MACE filter suffers from poor generalization. Increasing the number of exemplars used to compute the filter coefficients can improve the generalization, but the number of exemplars is restricted by the stability of the computation. We show a simple extension of the MACE filter to nonlinear processing techniques (i.e. nonlinear associative memories) which exhibits improved generalization and discrimination performance. The operating parameters of the proposed extension are difficult to compute analytically and adaptive learning methods are needed. Since the output of the MACE filter is optimized over the output plane any nonlinear extension of the MACE filter should encompass the output plane as well. In general this leads to exhaustive training over the entire output plane over all training exemplars. We present an efficient method for computing the parameters of the nonlinear extension which greatly reduces the training iterations required. Experimental results with 35 GHz inverse synthetic aperture radar (ISAR) data are also shown.

  13. MHD activity in the ISX-B tokamak: experimental results and theoretical interpretation

    SciTech Connect

    Carreras, B.A.; Dunlap, J.L.; Bell, J.D.; Charlton, L.A.; Cooper, W.A.; Dory, R.A.; Hender, T.C.; Hicks, H.R.; Holmes, J.A.; Lynch, V.E.

    1982-01-01

    The observed spectrum of MHD fluctuations in the ISX-B tokamak is clearly dominated by the n=1 mode when the q=1 surface is in the plasma. This fact agrees well with theoretical predictions based on 3-D resistive MHD calculations. They show that the (m=1; n=1) mode is then the dominant instability. It drives other n=1 modes through toroidal coupling and n>1 modes through nonlinear couplings. These theoretically predicted mode structures have been compared in detail with the experimentally measured wave forms (using arrays of soft x-ray detectors). The agreement is excellent. More detailed comparisons between theory and experiment have required careful reconstructions of the ISX-B equilibria. The equilibria so constructed have permitted a precise evaluation of the ideal MHD stability properties of ISX-B. The present results indicate that the high ..beta.. ISX-B equilibria are marginally stable to finite eta ideal MHD modes. The resistive MHD calculations also show that at finite ..beta.. there are unstable resistive pressure driven modes.

  14. Development, calibration, and experimental results obtained with an innovative calorimeter (CALMOS) for nuclear heating measurements

    SciTech Connect

    Carcreff, Hubert; Cloute-Cazalaa, Veronique; Salmon, Laurent

    2012-08-15

    Nuclear heating inside an MTR reactor has to be known in order to be able to control samples temperature during irradiation experiments. An R and D program has been carried out at CEA to design a new type of in-core calorimetric system. This new development, started in 2002, has for main objective to manufacture a calorimeter suitable to monitoring nuclear heating inside the 70 MWth OSIRIS material testing reactor operated by CEA's Nuclear Energy Division at the Saclay research center. An innovative calorimetric probe, associated to a specific handling system, has been designed to provide access to measurements both along the fissile height and on the upper part of the core, where nuclear heating still remains high. Two mock-ups of the probe were manufactured and tested in 2005 and 2009 in ex-core area of OSIRIS reactor for process validation, while a displacement system has been especially studied to move the probe along a given axial measurement range. This paper deals with the development, tests on preliminary mock-ups and the finalization of the probe. Main modeling and experimental results are presented. Moreover, alternative methods to calibration for nuclear heating rate measurements which are now possible with this new calorimeter are presented and discussed. (authors)

  15. Development, calibration and experimental results obtained with an innovative calorimeter (CALMOS) for nuclear heating measurements

    SciTech Connect

    Carcreff, H.; Cloute-Cazalaa, V.; Salmon, L.

    2011-07-01

    Nuclear heating inside an MTR reactor has to be known in order to be able to control samples temperature during irradiation experiments. An R and D program has been carried out at CEA to design a new type of in-core calorimetric system. This new development, started in 2002, has for main objective to manufacture a calorimeter suitable to monitoring nuclear heating inside the 70 MWth OSIRIS material testing reactor operated by CEA's Nuclear Energy Div. at the Saclay research center. An innovative calorimetric probe, associated to a specific handling system, has been designed to provide access to measurements both along the fissile height and on the upper part of the core, where nuclear heating still remains high. Two mock-ups of the probe were manufactured and tested in 2005 and 2009 in ex-core area of OSIRIS reactor for process validation, while a displacement system has been especially studied to move the probe along a given axial measurement range. This paper deals with the development, tests on preliminary mock-ups and the finalization of the probe. Main modeling and experimental results are presented. Moreover, alternative methods to calibration for nuclear heating rate measurements which are now possible with this new calorimeter are presented and discussed. (authors)

  16. Biocompatibility of Ricinus communis polymer with addition of calcium carbonate compared to titanium. Experimental study in guinea pigs

    PubMed Central

    Graça, Yorgos Luiz Santos De Salles; Opolski, Ana Cristina; Barboza, Barbara Evelin Gonçalves; Erbano, Bruna Olandoski; Mazzaro, Caroline Cantalejo; Klostermann, Flávia Caroline; Sucharski, Enéas Eduardo; Kubrusly, Luiz Fernando

    2014-01-01

    Objective The aim of the present investigation was to determine whether the difference in inflammatory tissue reaction between the Riccinus communis (castor) polymer with calcium carbonate and the titanium implant is statistically significant. Methods Thirty-two Cavia porcellus were allocated into four groups of eight animals each. We implanted the two types of materials in the retroperitoneal space of all the animals. They were euthanized at 7, 20, 30 and 40 days after surgery, and an histological study of the samples was conducted. Results All implants showed characteristics of chronic inflammation regardless of the material and timepoint of evaluation. There was no statistically significant difference between Pm+CaCO3 and Ti with regard to the presence of granulation tissue, tissue congestion, histiocytes, lymphocytes, neutrophils, giant cells, and fibrosis (P> 0.05). Conclusion The castor oil polymer plus calcium carbonate implant was not statistically different from the titanium implant regarding inflammatory tissue reaction. PMID:25140479

  17. Laboratory Analyses of Micron-Sized Solid Grains: Experimental Techniques and Recent Results

    NASA Astrophysics Data System (ADS)

    Colangeli, L.; Bussoletti, E.

    1997-12-01

    The investigation of comets has proceded for long time on remote observations from ground. In 1986 several space missions towards comet Halley have allowed, for the first time, to have a close look to a comet (Encounters with comet Halley 1986). In particular, the GIOTTO mission by the European Space Agency (ESA) has provided "in situ" observations and measurements up to a distance of about 600 Km from the nucleus. Surface morphology and physical properties have been observed; plasma, gas and dust components in the coma have been analyzed. It is clear, however, that definite answers about the primordial nature of comets and their relation with interstellar material can be obtained only from direct analysis of cometary samples. Future space missions such as CRAF (NASA) and ROSETTA (ESA) have exactly this aim. In particular, the ambitious goal of Rosetta mission is to return to earth comet samples which can be analyzed carefully in laboratory. In preparation to this event a large effort must be placed both in the improvement of existing analytical techniques and in the development of new methods which will provide as much information as possible on "returned comet samples" (hereinafter RCSS). Handling of extra-terrestrial samples will require to operate in carefully controlled and extremely "inert" ambient conditions. In addition, working on a limited amount of "unique" cometary material will also impose to use analytical techniques which should not produce alteration, contamination or destruction of the sample. Many suggestions can come from people working in laboratory on "cosmic dust"; in fact, experimental methods which are applied to analyze: (a) interplanetary dust particles (IDPS) collected in stratosphere, (b) meteorites, and (c) laboratory produced cosmic dust analog samples, can be mutuated or properly improved in the future for specific application to RCSS. Since modern techniques used to analyze IDPs and meteorites are reviewed elsewhere in this workshop

  18. EXPERIMENTAL EPIDEMIOLOGY : II. EFFECT OF THE ADDITION OF HEALTHY MICE TO A POPULATION SUFFERING FROM MOUSE TYPHOID.

    PubMed

    Amoss, H L

    1922-06-30

    1. A kind of mouse village was set up into which was introduced a small number of mice fed on a culture of so called mouse typhoid (Bacillus pestis cavice of the Bacillus paratyphosus B group) bacillus. The spread of the infection so induced to the cages, or "homes," of the other mice was left to accident through the attendant who fed the animals and cleaned the cages. That this means was likely to be sufficient was deduced from the epidemic reported by Lynch. A spot map was kept throughout the experiments which extended from 1919 into 1922. 2. The first effect of the exposure of normal mice to a much smaller number of mice fed on the culture is to set up a sporadic, not an epidemic outbreak of mouse typhoid. This is the regularly recurring incident of the experiment as shown by low mortality and low cage attack rate. Such a sporadic prevalence is self-limited in time. 3. The introduction of fresh, normal mice into a community in which sporadic deaths are occurring leads regularly, not to the further extension of the sporadic deaths, but to an epidemic spread, as shown by high mortality and high cage attack rate. The epidemic begins with deaths among the new mice, but extends to the old mice which succumb later. The spread ceases and the wave subsides before all the mice have succumbed. A state of equilibrium between the infecting bacillus and the surviving mice is reached; no more deaths occur. The epidemic outbreak, therefore, is also self-limited in time. 4. If, now, another new addition of normal mice is brought into the potentially infected community, the events are reenacted; deaths occur among the new, another epidemic wave sweeps through the population, again claiming victims among the previous survivors. Through the replacement of the destroyed mice with fresh, normal mice, epidemic wave after wave is produced, until certain groups of old survivors are entirely wiped out. There seems to be no limit to this process, as there will always be survivors at

  19. CZT detectors used in different irradiation geometries: Simulations and experimental results

    SciTech Connect

    Fritz, Shannon G.; Shikhaliev, Polad M.

    2009-04-15

    The purpose of this work was to evaluate potential advantages and limitations of CZT detectors used in surface-on, edge-on, and tilted angle irradiation geometries. Simulations and experimental investigations of the energy spectrum measured by a CZT detector have been performed using different irradiation geometries of the CZT. Experiments were performed using a CZT detector with 10x10 mm{sup 2} size and 3 mm thickness. The detector was irradiated with collimated photon beams from Am-241 (59.5 keV) and Co-57 (122 keV). The edge-scan method was used to measure the detector response function in edge-on illumination mode. The tilted angle mode was investigated with the radiation beam directed to the detector surface at angles of 90 degree sign , 15 degree sign , and 10 degree sign . The Hecht formalism was used to simulate theoretical energy spectra. The parameters used for simulations were matched to experiment to compare experimental and theoretical results. The tilted angle CZT detector suppressed the tailing of the spectrum and provided an increase in peak-to-total ratio from 38% at 90 degree sign to 83% at 10 degree sign tilt angle for 122 keV radiation. The corresponding increase for 59 keV radiation was from 60% at 90 degree sign to 85% at 10 degree sign tilt angle. The edge-on CZT detector provided high energy resolution when the beam thickness was much smaller than the thickness of CZT. The FWHM resolution in edge-on illumination mode was 4.2% for 122 keV beam with 0.3 mm thickness, and rapidly deteriorated when the thickness of the beam was increased. The energy resolution of surface-on geometry suffered from strong tailing effect at photon energies higher than 60 keV. It is concluded that tilted angle CZT provides high energy resolution but it is limited to a 1D linear array configuration. The surface-on CZT provides 2D pixel arrays but suffers from tailing effect and charge build up. The edge-on CZT is considered suboptimal as it requires small beam

  20. Acoustic propagation in the Hudson River Estuary: Analysis of experimental measurements and numerical modeling results

    NASA Astrophysics Data System (ADS)

    Radhakrishnan, Sreeram

    Underwater intrusion detection is an ongoing security concern in port and harbor areas. Of particular interest is to detect SCUBA divers, unmanned underwater vehicles and small boats from their acoustic signature. A thorough understanding of the effects of the shallow water propagating medium on acoustic signals can help develop new technologies and improve the performance of existing acoustic based surveillance systems. The Hudson River Estuary provides us with such a shallow water medium to conduct research and improve our knowledge of shallow water acoustics. Acoustic propagation in the Hudson River Estuary is highly affected by the temporal and spatial variability of salinity and temperature due to tides, freshwater inflows, winds etc. The primary goal of this research is to help develop methodologies to predict the formation of an acoustic field in the realistic environment of the lower Hudson River Estuary. Shallow water high-frequency acoustic propagation experiments were conducted in the Hudson River near Hoboken, New Jersey. Channel Impulse Response (CIR) measurements were carried out in the frequency band from 10 to 100 kHz for distances up to 200 meters in a water depth of 8-10 meters which formed the basis for experimental Transmission Loss (TL). CIR data was also utilized to demonstrate multi-path propagation in shallow water. Acoustic propagation models based on Ray Theory and Parabolic Equation methods were implemented in the frequency band from 10 to 100 kHz and TL was estimated. The sound velocity profiles required as input by acoustic propagation models were calculated from in-situ measurements of temperature, salinity and depth. Surface reflection loss was obtained from CIR data and incorporated into the acoustic propagation models. Experimentally obtained TL was used to validate the acoustic model predictions. An outcome of this research is an operational acoustic transmission loss (TL) forecast system based on the existing, Stevens New York