Science.gov

Sample records for addition results showed

  1. 19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS CONCRETE BLOCK CONSTRUCTION OF ADDITION. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  2. View of southwest corner showing ell addition and carport, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of southwest corner showing ell addition and carport, facing northeast. - Albrook Air Force Station, Field Officer's Quarters, West side of Dargue Avenue Circle, Balboa, Former Panama Canal Zone, CZ

  3. 1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ANGLES IN BUILDING AT SOUTHERN END. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  4. 6. INTERIOR OF UNFINISHED BASEMENT UNDER BEDROOM ADDITION SHOWING CONCRETE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. INTERIOR OF UNFINISHED BASEMENT UNDER BEDROOM ADDITION SHOWING CONCRETE FORM IMPRESSIONS ON THE WALLS, AND EXPOSED FLOOR SUPPORT BEAMS. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  5. Interior view of addition pharmacy showing dutch door and security ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of addition pharmacy showing dutch door and security ceiling grate, facing north. - Albrook Air Force Station, Dispensary, East side of Canfield Avenue, Balboa, Former Panama Canal Zone, CZ

  6. View of building 11050, showing metal clad addition on east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing metal clad addition on east elevation, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  7. View of building 11050 showing south side with modern addition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 showing south side with modern addition on the left and freestanding structure in the center. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

  8. View of building 11050, showing two additions on east and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing two additions on east and north side. Looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  9. 2. WEST SIDE SHOWING SHED ADDITION, BATHROOM AND WOODPOLE TELECOMMUNICATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. WEST SIDE SHOWING SHED ADDITION, BATHROOM AND WOOD-POLE TELECOMMUNICATION ANTENNA. NEW CONTROL STATION BUILDING IN BACKGROUND. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Control Station, Hydrographer's Office, Bishop Creek, Bishop, Inyo County, CA

  10. 12. POWER PLANT PART OF BUILDING SHOWING RELATION TO ADDITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. POWER PLANT PART OF BUILDING SHOWING RELATION TO ADDITION AND EQUIPMENT PART OF BUILDING - Boswell Bay White Alice Site, Radio Relay Building, Chugach National Forest, Cordova, Valdez-Cordova Census Area, AK

  11. 6. SIDE ELEVATION, DETAIL SHOWING ORIGINAL LOG CONSTRUCTION, CLAPBOARD ADDITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. SIDE ELEVATION, DETAIL SHOWING ORIGINAL LOG CONSTRUCTION, CLAPBOARD ADDITION AND CHIMNEY STACK - Shinn-Curtis Log Cabin, 23 Washington Street (moved from Rancocas Boulevard), Mount Holly, Burlington County, NJ

  12. 4. WEST SIDE OF CANNERY In addition to showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. WEST SIDE OF CANNERY In addition to showing the on-going deterioration of the buildings, this view shows the variety of types of construction used as the numerous additions were being made. The wooden covered conveyor system, which transported empty cans from the can storage area to the canning floor can be seen at the base of the smoke stack to the right. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  13. 15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United Engineering Company Ltd., Alameda Shipyard. A site map with all existing structures keyed to an identification legend. Also shows proposed new structures. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2. Plan no. 10,528. Scale one inch to 100 feet. November 12, 1943, last revised 1/18/44. pencil on vellum - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

  14. Oblique view from southwest showing newer (1966) addition with taller ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Oblique view from southwest showing newer (1966) addition with taller original structure, view facing east-northeast - U.S. Naval Base, Pearl Harbor, Industrial X-Ray Building, Off Sixth Street, adjacent to and south of Facility No. 11, Pearl City, Honolulu County, HI

  15. 4. DETAIL VIEW OF EAST CORNER, SHOWING RECENT ADDITION OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. DETAIL VIEW OF EAST CORNER, SHOWING RECENT ADDITION OF WINDOWS TO SOUTHEAST SIDE AND RECENT CLADDING IN CONTRAST TO ORIGINAL SHIPLAP SIDING INTACT ON NORTHEAST SIDE - Oakland Army Base, Transit Shed, East of Dunkirk Street & South of Burma Road, Oakland, Alameda County, CA

  16. 32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR AT PHOTO LEFT CENTER AND 1-LIGHT OVER 1LIGHT SASH WINDOW THROUGH WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  17. 8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF NAILS USED TO ADHERE PORTLAND CEMENT PLASTER, SOUTH ADOBE WALL ADJACENT TO WINDOW Note: Photographs Nos. AZ-159-A-9 through AZ-159-A-10 are photocopies of photographs. The original prints and negatives are located in the SCS Tucson Plant Materials Center, Tucson, Arizona. Photographer Ted F. Spaller. - Tucson Plant Material Center, Machinery Shed, 3241 North Romero Road, Tucson, Pima County, AZ

  18. 51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER AT LOWER LEFT, AND FOUNDATIONS FOR ROD MILL BETWEEN COOLER AND STEPHENS-ADAMSON INCLINED BUCKET ELEVATOR. THE BELT CONVEYOR TO RIGHT OF ELEVATOR FED ELEVATOR FROM ROD MILL. 100-TON ORE BIN AND DUST COLLECTOR IS BEHIND FRAMING BENT. NOTE CONVEYOR EMERGING FROM BOTTOM OF ORE BIN, THIS AND THE INCLINED ELEVATOR FED THE SYMONS SCREEN (MISSING). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  19. 13. DETAIL VIEW OF BUTTRESS 4 SHOWING THE RESULTS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. DETAIL VIEW OF BUTTRESS 4 SHOWING THE RESULTS OF POOR CONSTRUCTION WORK. THOUGH NOT A SERIOUS STRUCTURAL DEFICIENCY, THE 'HONEYCOMB' TEXTURE OF THE CONCRETE SURFACE WAS THE RESULT OF INADEQUATE TAMPING AT THE TIME OF THE INITIAL 'POUR'. - Hume Lake Dam, Sequioa National Forest, Hume, Fresno County, CA

  20. 12. Interior view of the 1930's leant0 addition, showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Interior view of the 1930's lean-t0 addition, showing the commercial storage and space and the addition's roof framing; looking north - Horsepasture Store, U.S. Route 58 & State Route 687, Horse Pasture, Henry County, VA

  1. 54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ADDITION ON LEFT WITH BASE OF EXHAUST STACK, PORTION OF TOPPLED STACK ON LOWER RIGHT IN VIEW, AND UPPER TAILINGS POND BEYOND. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  2. 50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100TON STEEL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100-TON STEEL UNOXIDIZED ORE BIN, STEPHENS-ADAMSON 15 TON/HR INCLINED BUCKET ELEVATOR, AND DUST COLLECTION BIN IN UPPER RIGHT QUADRANT. THE ROD MILL CIRCUIT STOOD IN FRONT OF THE BUCKET ELEVATOR AND BEHIND THE BAKER COOLER (LEFT CENTER). MILL SOLUTION TANKS WERE IN FRONT OF THE CRUSHED OXIDIZED ORE BIN (CENTER), AND THE MILL FLOOR WAS THE NEXT LEVEL DOWN (RIGHT). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  3. Additional Results of Ice-Accretion Scaling at SLD Conditions

    NASA Technical Reports Server (NTRS)

    Bond, Thomas H. (Technical Monitor); Anderson, David N.; Tsao, Jen-Ching

    2005-01-01

    To determine scale velocity an additional similarity parameter is needed to supplement the Ruff scaling method. A Weber number based on water droplet MVD has been included in several studies because the effect of droplet splashing on ice accretion was believed to be important, particularly for SLD conditions. In the present study, ice shapes recorded at Appendix-C conditions and recent results at SLD conditions are reviewed to show that droplet diameter cannot be important to main ice shape, and for low airspeeds splashing does not appear to affect SLD ice shapes. Evidence is presented to show that while a supplementary similarity parameter probably has the form of a Weber number, it must be based on a length proportional to model size rather than MVD. Scaling comparisons were made between SLD reference conditions and Appendix-C scale conditions using this Weber number. Scale-to-reference model size ratios were 1:1.7 and 1:3.4. The reference tests used a 91-cm-chord NACA 0012 model with a velocity of approximately 50 m/s and an MVD of 160 m. Freezing fractions of 0.3, 0.4, and 0.5 were included in the study.

  4. Gun shows and gun violence: fatally flawed study yields misleading results.

    PubMed

    Wintemute, Garen J; Hemenway, David; Webster, Daniel; Pierce, Glenn; Braga, Anthony A

    2010-10-01

    A widely publicized but unpublished study of the relationship between gun shows and gun violence is being cited in debates about the regulation of gun shows and gun commerce. We believe the study is fatally flawed. A working paper entitled "The Effect of Gun Shows on Gun-Related Deaths: Evidence from California and Texas" outlined this study, which found no association between gun shows and gun-related deaths. We believe the study reflects a limited understanding of gun shows and gun markets and is not statistically powered to detect even an implausibly large effect of gun shows on gun violence. In addition, the research contains serious ascertainment and classification errors, produces results that are sensitive to minor specification changes in key variables and in some cases have no face validity, and is contradicted by 1 of its own authors' prior research. The study should not be used as evidence in formulating gun policy.

  5. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  6. Mars-GRAM 2010: Additions and Resulting Improvements

    NASA Technical Reports Server (NTRS)

    Justh, Hilary L.; Burns, K. Lee

    2013-01-01

    factors. The adjustment factors generated by this process had to satisfy the gas law as well as the hydrostatic relation and are expressed as a function of height (z), Latitude (Lat) and areocentric solar longitude (Ls). The greatest adjustments are made at large optical depths such as tau greater than 1. The addition of the adjustment factors has led to better correspondence to TES Limb data from 0-60 km altitude as well as better agreement with MGS, ODY and MRO data at approximately 90-130 km altitude. Improved Mars-GRAM atmospheric simulations for various locations, times and dust conditions on Mars will be presented at the workshop session. The latest results validating Mars-GRAM 2010 versus Mars Climate Sounder data will also be presented. Mars-GRAM 2010 updates have resulted in improved atmospheric simulations which will be very important when beginning systems design, performance analysis, and operations planning for future aerocapture, aerobraking or landed missions to Mars.

  7. Additional Results of Glaze Icing Scaling in SLD Conditions

    NASA Technical Reports Server (NTRS)

    Tsao, Jen-Ching

    2016-01-01

    This presentation reports results from recent icing scaling tests in NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the scaling method recommended for Appendix C conditions might apply to SLD conditions.

  8. Small-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Schonewill, Philip P.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, G. N.; Mahoney, Lenna A.; Tran, Diana N.; Burns, Carolyn A.; Kurath, Dean E.

    2013-08-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are largely absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale. The small-scale testing and resultant data are described in Mahoney et al. (2012b) and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used to mimic the

  9. Large-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Daniel, Richard C.; Gauglitz, Phillip A.; Burns, Carolyn A.; Fountain, Matthew S.; Shimskey, Rick W.; Billing, Justin M.; Bontha, Jagannadha R.; Kurath, Dean E.; Jenks, Jeromy WJ; MacFarlan, Paul J.; Mahoney, Lenna A.

    2013-08-01

    One of the events postulated in the hazard analysis for the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak event involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids that behave as a Newtonian fluid. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and in processing facilities across the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are mostly absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale testing. The small-scale testing and resultant data are described in Mahoney et al. (2012b), and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used

  10. Additional Results of Glaze Icing Scaling in SLD Conditions

    NASA Technical Reports Server (NTRS)

    Tsao, Jen-Ching

    2016-01-01

    New guidance of acceptable means of compliance with the super-cooled large drops (SLD) conditions has been issued by the U.S. Department of Transportation's Federal Aviation Administration (FAA) in its Advisory Circular AC 25-28 in November 2014. The Part 25, Appendix O is developed to define a representative icing environment for super-cooled large drops. Super-cooled large drops, which include freezing drizzle and freezing rain conditions, are not included in Appendix C. This paper reports results from recent glaze icing scaling tests conducted in NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the scaling methods recommended for Appendix C conditions might apply to SLD conditions. The models were straight NACA 0012 wing sections. The reference model had a chord of 72 in. and the scale model had a chord of 21 in. Reference tests were run with airspeeds of 100 and 130.3 kn and with MVD's of 85 and 170 micron. Two scaling methods were considered. One was based on the modified Ruff method with scale velocity found by matching the Weber number WeL. The other was proposed and developed by Feo specifically for strong glaze icing conditions, in which the scale liquid water content and velocity were found by matching reference and scale values of the nondimensional water-film thickness expression and the film Weber number Wef. All tests were conducted at 0 deg AOA. Results will be presented for stagnation freezing fractions of 0.2 and 0.3. For nondimensional reference and scale ice shape comparison, a new post-scanning ice shape digitization procedure was developed for extracting 2-D ice shape profiles at any selected span-wise location from the high fidelity 3-D scanned ice shapes obtained in the IRT.

  11. Additional Results of Glaze Icing Scaling in SLD Conditions

    NASA Technical Reports Server (NTRS)

    Tsao, Jen-Ching

    2016-01-01

    New guidance of acceptable means of compliance with the super-cooled large drops (SLD) conditions has been issued by the U.S. Department of Transportation's Federal Aviation Administration (FAA) in its Advisory Circular AC 25-28 in November 2014. The Part 25, Appendix O is developed to define a representative icing environment for super-cooled large drops. Super-cooled large drops, which include freezing drizzle and freezing rain conditions, are not included in Appendix C. This paper reports results from recent glaze icing scaling tests conducted in NASA Glenn Icing Research Tunnel (IRT) to evaluate how well the scaling methods recommended for Appendix C conditions might apply to SLD conditions. The models were straight NACA 0012 wing sections. The reference model had a chord of 72 inches and the scale model had a chord of 21 inches. Reference tests were run with airspeeds of 100 and 130.3 knots and with MVD's of 85 and 170 microns. Two scaling methods were considered. One was based on the modified Ruff method with scale velocity found by matching the Weber number W (sub eL). The other was proposed and developed by Feo specifically for strong glaze icing conditions, in which the scale liquid water content and velocity were found by matching reference and scale values of the non-dimensional water-film thickness expression and the film Weber number W (sub ef). All tests were conducted at 0 degrees angle of arrival. Results will be presented for stagnation freezing fractions of 0.2 and 0.3. For non-dimensional reference and scale ice shape comparison, a new post-scanning ice shape digitization procedure was developed for extracting 2-dimensional ice shape profiles at any selected span-wise location from the high fidelity 3-dimensional scanned ice shapes obtained in the IRT.

  12. The Modern U.S. High School Astronomy Course, Its Status and Makeup II: Additional Results

    ERIC Educational Resources Information Center

    Krumenaker, Larry

    2009-01-01

    A postal survey of high school astronomy teachers strongly confirms many results of an earlier electronic survey. Additional and new results include a measure of the level of inquiry (more structured inquiry and teacher-led) in the classroom as well as data showing that more emphasis is given to traditional topics than to contemporary astronomy…

  13. Astronomy Diagnostic Test Results Reflect Course Goals and Show Room for Improvement

    NASA Astrophysics Data System (ADS)

    Lopresto, Michael C.

    The results of administering the Astronomy Diagnostic Test (ADT) to introductory astronomy students at Henry Ford Community College over three years have shown gains comparable with national averages. Results have also accurately corresponded to course goals, showing greater gains in topics covered in more detail, and lower gains in topics covered in less detail. Also evident in the results were topics for which improvement of instruction is needed. These factors and the ease with which the ADT can be administered constitute evidence of the usefulness of the ADT as an assessment instrument for introductory astronomy.

  14. Results From Mars Show Electrostatic Charging of the Mars Pathfinder Sojourner Rover

    NASA Technical Reports Server (NTRS)

    Kolecki, Joseph C.; Siebert, Mark W.

    1998-01-01

    Indirect evidence (dust accumulation) has been obtained indicating that the Mars Pathfinder rover, Sojourner, experienced electrostatic charging on Mars. Lander camera images of the Sojourner rover provide distinctive evidence of dust accumulation on rover wheels during traverses, turns, and crabbing maneuvers. The sol 22 (22nd Martian "day" after Pathfinder landed) end-of-day image clearly shows fine red dust concentrated around the wheel edges with additional accumulation in the wheel hubs. A sol 41 image of the rover near the rock "Wedge" (see the next image) shows a more uniform coating of dust on the wheel drive surfaces with accumulation in the hubs similar to that in the previous image. In the sol 41 image, note particularly the loss of black-white contrast on the Wheel Abrasion Experiment strips (center wheel). This loss of contrast was also seen when dust accumulated on test wheels in the laboratory. We believe that this accumulation occurred because the Martian surface dust consists of clay-sized particles, similar to those detected by Viking, which have become electrically charged. By adhering to the wheels, the charged dust carries a net nonzero charge to the rover, raising its electrical potential relative to its surroundings. Similar charging behavior was routinely observed in an experimental facility at the NASA Lewis Research Center, where a Sojourner wheel was driven in a simulated Martian surface environment. There, as the wheel moved and accumulated dust (see the following image), electrical potentials in excess of 100 V (relative to the chamber ground) were detected by a capacitively coupled electrostatic probe located 4 mm from the wheel surface. The measured wheel capacitance was approximately 80 picofarads (pF), and the calculated charge, 8 x 10(exp -9) coulombs (C). Voltage differences of 100 V and greater are believed sufficient to produce Paschen electrical discharge in the Martian atmosphere. With an accumulated net charge of 8 x 10(exp

  15. Animation shows promise in initiating timely cardiopulmonary resuscitation: results of a pilot study.

    PubMed

    Attin, Mina; Winslow, Katheryn; Smith, Tyler

    2014-04-01

    Delayed responses during cardiac arrest are common. Timely interventions during cardiac arrest have a direct impact on patient survival. Integration of technology in nursing education is crucial to enhance teaching effectiveness. The goal of this study was to investigate the effect of animation on nursing students' response time to cardiac arrest, including initiation of timely chest compression. Nursing students were randomized into experimental and control groups prior to practicing in a high-fidelity simulation laboratory. The experimental group was educated, by discussion and animation, about the importance of starting cardiopulmonary resuscitation upon recognizing an unresponsive patient. Afterward, a discussion session allowed students in the experimental group to gain more in-depth knowledge about the most recent changes in the cardiac resuscitation guidelines from the American Heart Association. A linear mixed model was run to investigate differences in time of response between the experimental and control groups while controlling for differences in those with additional degrees, prior code experience, and basic life support certification. The experimental group had a faster response time compared with the control group and initiated timely cardiopulmonary resuscitation upon recognition of deteriorating conditions (P < .0001). The results demonstrated the efficacy of combined teaching modalities for timely cardiopulmonary resuscitation. Providing opportunities for repetitious practice when a patient's condition is deteriorating is crucial for teaching safe practice.

  16. Long-Term Trial Results Show No Mortality Benefit from Annual Prostate Cancer Screening

    Cancer.gov

    Thirteen year follow-up data from the Prostate, Lung, Colorectal and Ovarian (PLCO) cancer screening trial show higher incidence but similar mortality among men screened annually with the prostate-specific antigen (PSA) test and digital rectal examination

  17. Stem cells show promising results for lymphoedema treatment--a literature review.

    PubMed

    Toyserkani, Navid Mohamadpour; Christensen, Marlene Louise; Sheikh, Søren Paludan; Sørensen, Jens Ahm

    2015-04-01

    Lymphoedema is a debilitating condition, manifesting in excess lymphatic fluid and swelling of subcutaneous tissues. Lymphoedema is as of yet still an incurable condition and current treatment modalities are not satisfactory. The capacity of mesenchymal stem cells to promote angiogenesis, secrete growth factors, regulate the inflammatory process, and differentiate into multiple cell types make them a potential ideal therapy for lymphoedema. Adipose tissue is the richest and most accessible source of mesenchymal stem cells and they can be harvested, isolated, and used for therapy in a single stage procedure as an autologous treatment. The aim of this paper was to review all studies using mesenchymal stem cells for lymphoedema treatment with a special focus on the potential use of adipose-derived stem cells. A systematic search was performed and five preclinical and two clinical studies were found. Different stem cell sources and lymphoedema models were used in the described studies. Most studies showed a decrease in lymphoedema and an increased lymphangiogenesis when treated with stem cells and this treatment modality has so far shown great potential. The present studies are, however, subject to bias and more preclinical studies and large-scale high quality clinical trials are needed to show if this emerging therapy can satisfy expectations.

  18. AMS 14C analysis of teeth from archaeological sites showing anomalous esr dating results

    NASA Astrophysics Data System (ADS)

    Grün, Rainer; Abeyratne, Mohan; Head, John; Tuniz, Claudio; Hedges, Robert E. M.

    We have carried out AMS radiocarbon analysis on two groups of samples: the first one gave reasonable ESR age estimates and the second one yielded serious age underestinations. All samples were supposedly older than 35 ka, the oldest being around 160 ka. Two pretreatment techniques were used for radiocarbon dating: acid evolution and thermal release. Heating to 600, 750 and 900°C combined with total de-gassing at these temperatures was chosen to obtain age estimates on the organic fraction, secondary carbonates and original carbonate present in the hydroxyapatite mineral phase, respectively. All radiocarbon results present serious age underestimations. The secondary carbonate fraction gives almost modern results indicating an extremely rapid exchange of this component. Owing to this very rapid carbonate exchange it is not likely that the ESR signals used for dating are associated with the secondary carbonates. One tooth from Tabun with independent age estimates of >150 ka was further investigated by the Oxford AMS laboratory, yielding an age estimate of 1930±100 BP on the residual collagen from dentine and 18,000±160 BP on the carbonate component of the enamel bioapatite. We did not, however, find an explanation of why some samples give serious ESR underestimatioils whilst many others provide reasonable results.

  19. Aortic emboli show surprising size dependent predilection for cerebral arteries: Results from computational fluid dynamics

    NASA Astrophysics Data System (ADS)

    Carr, Ian; Schwartz, Robert; Shadden, Shawn

    2012-11-01

    Cardiac emboli can have devastating consequences if they enter the cerebral circulation, and are the most common cause of embolic stroke. Little is known about relationships of embolic origin/density/size to cerebral events; as these relationships are difficult to observe. To better understand stoke risk from cardiac and aortic emboli, we developed a computational model to track emboli from the heart to the brain. Patient-specific models of the human aorta and arteries to the brain were derived from CT angiography from 10 MHIF patients. Blood flow was modeled by the Navier-Stokes equations using pulsatile inflow at the aortic valve, and physiologic Windkessel models at the outlets. Particulate was injected at the aortic valve and tracked using modified Maxey-Riley equations with a wall collision model. Results demonstrate aortic emboli that entered the cerebral circulation through the carotid or vertebral arteries were localized to specific locations of the proximal aorta. The percentage of released particles embolic to the brain markedly increased with particle size from 0 to ~1-1.5 mm in all patients. Larger particulate became less likely to traverse the cerebral vessels. These findings are consistent with sparse literature based on transesophageal echo measurements. This work was supported in part by the National Science Foundation, award number 1157041.

  20. Initiative To Reduce Avoidable Hospitalizations Among Nursing Facility Residents Shows Promising Results.

    PubMed

    Ingber, Melvin J; Feng, Zhanlian; Khatutsky, Galina; Wang, Joyce M; Bercaw, Lawren E; Zheng, Nan Tracy; Vadnais, Alison; Coomer, Nicole M; Segelman, Micah

    2017-03-01

    Nursing facility residents are frequently admitted to the hospital, and these hospital stays are often potentially avoidable. Such hospitalizations are detrimental to patients and costly to Medicare and Medicaid. In 2012 the Centers for Medicare and Medicaid Services launched the Initiative to Reduce Avoidable Hospitalizations among Nursing Facility Residents, using evidence-based clinical and educational interventions among long-stay residents in 143 facilities in seven states. In state-specific analyses, we estimated net reductions in 2015 of 2.2-9.3 percentage points in the probability of an all-cause hospitalization and 1.4-7.2 percentage points in the probability of a potentially avoidable hospitalization for participating facility residents, relative to comparison-group members. In that year, average per resident Medicare expenditures were reduced by $60-$2,248 for all-cause hospitalizations and by $98-$577 for potentially avoidable hospitalizations. The effects for over half of the outcomes in these analyses were significant. Variability in implementation and engagement across the nursing facilities and organizations that customized and implemented the initiative helps explain the variability in the estimated effects. Initiative models that included registered nurses or nurse practitioners who provided consistent clinical care for residents demonstrated higher staff engagement and more positive outcomes, compared to models providing only education or intermittent clinical care. These results provide promising evidence of an effective approach for reducing avoidable hospitalizations among nursing facility residents.

  1. Flue gas conditioning for improved particle collection in electrostatic precipitators. First topical report, Results of laboratory screening of additives

    SciTech Connect

    Durham, M.D.

    1993-04-16

    Several tasks have been completed in a program to evaluate additives to improve fine particle collection in electrostatic precipitators. Screening tests and laboratory evaluations of additives are summarized in this report. Over 20 additives were evaluated; four were found to improve flyash precipitation rates. The Insitec particle analyzer was also evaluated; test results show that the analyzer will provide accurate sizing and counting information for particles in the size range of {le} 10 {mu}m dia.

  2. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Pilot-Scale Test Results

    SciTech Connect

    Gary M. Blythe

    2006-03-01

    Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High Sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. This topical report presents the results from the Task 2 and Task 4 pilot-scale additive tests. The Task 3 and Task 5 full-scale additive tests will be conducted later in calendar year 2006.

  3. Additional results on space environmental effects on polymer matrix composites: Experiment A0180

    NASA Technical Reports Server (NTRS)

    Tennyson, R. C.

    1992-01-01

    Additional experimental results on the atomic oxygen erosion of boron, Kevlar, and graphite fiber reinforced epoxy matrix composites are presented. Damage of composite laminates due to micrometeoroid/debris impacts is also examined with particular emphasis on the relationship between damage area and actual hole size due to particle penetration. Special attention is given to one micrometeoroid impact on an aluminum base plate which resulted in ejecta visible on an adjoining vertical flange structure.

  4. Maps showing mines, quarries, oil and gas activity, and sample localities in and near the Sipsey Wilderness and additions, Lawrence and Winston Counties, Alabama

    SciTech Connect

    Mory, P.C.; Behum, P.T.; Ross, R.B. Jr.

    1982-01-01

    This report presents the results of a mineral survey of the Sipsey Wilderness and additions, William B. Bankhead National Forest, Lawrence and Winston Counties, Alabama. The survey includes: limestone quarrying, coal mining, and oil and gas activity. 7 references, 5 figures, 2 tables.

  5. Effect of product form upon fatigue-crack growth behavior in Alloy 718: additional results

    SciTech Connect

    James, L A

    1980-08-01

    A previous study had characterized the fatigue-crack growth behavior of four wrought product forms (sheet, plate, bar and forging) from a single heat of Alloy 718 and concluded that there were no consistent trends in the crack growth rate results that could be attributed to product form variability. The present study adds one additional product form (gas-tungsten-arc weldments) from the same heat, and compares the behavior to that exhibited by the wrought product forms. Two different precipitation heat-treatments were employed at each of five test temperatures (24, 316, 427, 538, and 649{sup 0}C).

  6. The effect of product form upon fatigue-crack growth behavior in Alloy 718: Additional results

    SciTech Connect

    James, L.A.

    1980-08-01

    A previous study had characterized the fatigue-crack growth behavior of four wrought product forms (sheet, plate, bar and forging) from a single heat of Alloy 718 and concluded that there were no consistent trends in the crack growth rate results that could be attributed to product form variability. The present study adds one additional product form (gas-tungsten-arc weldments) from the same heat, and compares the behavior to that exhibited by the wrought product forms. Two different precipitation heat-treatments were employed at each of five test temperatures. 11 refs., 5 figs., 3 tabs.

  7. Results of investigations of Ethernet network fault-tolerance parameters by using additional analysis subsystem

    NASA Astrophysics Data System (ADS)

    Sultanov, Albert H.; Gayfulin, Renat R.; Vinogradova, Irina L.

    2008-04-01

    Fiber optic telecommunication systems with duplex data transmitting over single fiber require reflection minimization. Moreover reflections may be so high that causes system deactivating by misoperation of conventional alarm, and system can not automatically adjudge the collision, so operator manual control is required. In this paper we proposed technical solution of mentioned problem based on additional analysis subsystem, realized on the installed Ufa-city fiber optic CTV system "Crystal". Experience of it's maintenance and results of investigations of the fault tolerance parameters are represented

  8. Rates of False-Positive Classification Resulting From the Analysis of Additional Embedded Performance Validity Measures.

    PubMed

    Silk-Eglit, Graham M; Stenclik, Jessica H; Miele, Andrea S; Lynch, Julie K; McCaffrey, Robert J

    2015-01-01

    Several studies have documented improvements in the classification accuracy of performance validity tests (PVTs) when they are combined to form aggregated models. Fewer studies have evaluated the impact of aggregating additional PVTs and changing the classification threshold within these models. A recent Monte Carlo simulation demonstrated that to maintain a false-positive rate (FPR) of ≤.10, only 1, 4, 8, 10, and 15 PVTs should be analyzed at classification thresholds of failing at least 1, at least 2, at least 3, at least 4, and at least 5 PVTs, respectively. The current study sought to evaluate these findings with embedded PVTs in a sample of real-life litigants and to highlight a potential danger in analytic flexibility with embedded PVTs. Results demonstrated that to maintain an FPR of ≤.10, only 3, 7, 10, 14, and 15 PVTs should be analyzed at classification thresholds of failing at least 1, at least 2, at least 3, at least 4, and at least 5 PVTs, respectively. Analyzing more than these numbers of PVTs resulted in a dramatic increase in the FPR. In addition, in the most extreme case, flexibility in analyzing and reporting embedded PVTs increased the FPR by 67%. Given these findings, a more objective approach to analyzing and reporting embedded PVTs should be introduced.

  9. Cannabinoid receptor 1 antagonist treatment induces glucagon release and shows an additive therapeutic effect with GLP-1 agonist in diet-induced obese mice.

    PubMed

    Patel, Kartikkumar Navinchandra; Joharapurkar, Amit Arvind; Patel, Vishal; Kshirsagar, Samadhan Govind; Bahekar, Rajesh; Srivastava, Brijesh Kumar; Jain, Mukul R

    2014-12-01

    Cannabinoid 1 (CB1) receptor antagonists reduce body weight and improve insulin sensitivity. Preclinical data indicates that an acute dose of CB1 antagonist rimonabant causes an increase in blood glucose. A stable analog of glucagon-like peptide 1 (GLP-1), exendin-4 improves glucose-stimulated insulin secretion in pancreas, and reduces appetite through activation of GLP-1 receptors in the central nervous system and liver. We hypothesized that the insulin secretagogue effect of GLP-1 agonist exendin-4 may synergize with the insulin-sensitizing action of rimonabant. Intraperitoneal as well as intracerebroventricular administration of rimonabant increased serum glucose upon glucose challenge in overnight fasted, diet-induced obese C57 mice, with concomitant rise in serum glucagon levels. Exendin-4 reversed the acute hyperglycemia induced by rimonabant. The combination of exendin-4 and rimonabant showed an additive effect in the food intake, and sustained body weight reduction upon repeated dosing. The acute efficacy of both the compounds was additive for inducing nausea-like symptoms in conditioned aversion test in mice, whereas exendin-4 treatment antagonized the effect of rimonabant on forced swim test upon chronic dosing. Thus, the addition of exendin-4 to rimonabant produces greater reduction in food intake owing to increased aversion, but reduces the other central nervous system side effects of rimonabant. The hyperglucagonemia induced by rimonabant is partially responsible for enhancing the antiobesity effect of exendin-4.

  10. Conventional physical therapy and physical therapy based on reflex stimulation showed similar results in children with myelomeningocele.

    PubMed

    Aizawa, Carolina Y P; Morales, Mariana P; Lundberg, Carolina; Moura, Maria Clara D Soares de; Pinto, Fernando C G; Voos, Mariana C; Hasue, Renata H

    2017-03-01

    We aimed to investigate whether infants with myelomeningocele would improve their motor ability and functional independence after ten sessions of physical therapy and compare the outcomes of conventional physical therapy (CPT) to a physical therapy program based on reflex stimulation (RPT). Twelve children were allocated to CPT (n = 6, age 18.3 months) or RPT (n = 6, age 18.2 months). The RPT involved proprioceptive neuromuscular facilitation. Children were assessed with the Gross Motor Function Measure and the Pediatric Evaluation of Disability Inventory before and after treatment. Mann-Whitney tests compared the improvement on the two scales of CPT versus RPT and the Wilcoxon test compared CPT to RPT (before vs. after treatment). Possible correlations between the two scales were tested with Spearman correlation coefficients. Both groups showed improvement on self-care and mobility domains of both scales. There were no differences between the groups, before, or after intervention. The CPT and RPT showed similar results after ten weeks of treatment.

  11. Bragg's rule of stopping power additivity: a compilation and summary of results

    SciTech Connect

    Thwaites, D.I.

    1983-09-01

    Stopping power additivity, as expressed by Bragg's rule, is an important concept in many practical situations involving charged particles. Its validity has been investigated in a large number of studies and the wide range of data is confusing and at times conflicting. No previous comprehensive survey of the data has been undertaken. Thus a compilation is attempted here of a hundred or so papers which have included tests of Bragg's rule. Their main results are indicated and a summary is given of the effects of chemical binding and phase on the stopping power of heavy charged particles. Such effects are confirmed on the evidence available. Chemical binding effects become more significant for materials containing low-Z constituents and as energy falls into and through the transition region. Deviations of up to 50% have been observed in atomic stopping cross sections extracted from measurements on hydrocarbons. There is still some conflicting evidence appearing on phase effects. However, in general a broad consensus is emerging indicating significant differences in H/sub 2/O and organic and similar materials. Stopping cross sections in the vapor phase are greater by up to approx. 5 or 10% at energies around those of the stopping power maximum for protons and He ions. The effects decrease as energy increases.

  12. Selection Indices and Multivariate Analysis Show Similar Results in the Evaluation of Growth and Carcass Traits in Beef Cattle

    PubMed Central

    Brito Lopes, Fernando; da Silva, Marcelo Corrêa; Magnabosco, Cláudio Ulhôa; Goncalves Narciso, Marcelo; Sainz, Roberto Daniel

    2016-01-01

    This research evaluated a multivariate approach as an alternative tool for the purpose of selection regarding expected progeny differences (EPDs). Data were fitted using a multi-trait model and consisted of growth traits (birth weight and weights at 120, 210, 365 and 450 days of age) and carcass traits (longissimus muscle area (LMA), back-fat thickness (BF), and rump fat thickness (RF)), registered over 21 years in extensive breeding systems of Polled Nellore cattle in Brazil. Multivariate analyses were performed using standardized (zero mean and unit variance) EPDs. The k mean method revealed that the best fit of data occurred using three clusters (k = 3) (P < 0.001). Estimates of genetic correlation among growth and carcass traits and the estimates of heritability were moderate to high, suggesting that a correlated response approach is suitable for practical decision making. Estimates of correlation between selection indices and the multivariate index (LD1) were moderate to high, ranging from 0.48 to 0.97. This reveals that both types of indices give similar results and that the multivariate approach is reliable for the purpose of selection. The alternative tool seems very handy when economic weights are not available or in cases where more rapid identification of the best animals is desired. Interestingly, multivariate analysis allowed forecasting information based on the relationships among breeding values (EPDs). Also, it enabled fine discrimination, rapid data summarization after genetic evaluation, and permitted accounting for maternal ability and the genetic direct potential of the animals. In addition, we recommend the use of longissimus muscle area and subcutaneous fat thickness as selection criteria, to allow estimation of breeding values before the first mating season in order to accelerate the response to individual selection. PMID:26789008

  13. Selection Indices and Multivariate Analysis Show Similar Results in the Evaluation of Growth and Carcass Traits in Beef Cattle.

    PubMed

    Brito Lopes, Fernando; da Silva, Marcelo Corrêa; Magnabosco, Cláudio Ulhôa; Goncalves Narciso, Marcelo; Sainz, Roberto Daniel

    2016-01-01

    This research evaluated a multivariate approach as an alternative tool for the purpose of selection regarding expected progeny differences (EPDs). Data were fitted using a multi-trait model and consisted of growth traits (birth weight and weights at 120, 210, 365 and 450 days of age) and carcass traits (longissimus muscle area (LMA), back-fat thickness (BF), and rump fat thickness (RF)), registered over 21 years in extensive breeding systems of Polled Nellore cattle in Brazil. Multivariate analyses were performed using standardized (zero mean and unit variance) EPDs. The k mean method revealed that the best fit of data occurred using three clusters (k = 3) (P < 0.001). Estimates of genetic correlation among growth and carcass traits and the estimates of heritability were moderate to high, suggesting that a correlated response approach is suitable for practical decision making. Estimates of correlation between selection indices and the multivariate index (LD1) were moderate to high, ranging from 0.48 to 0.97. This reveals that both types of indices give similar results and that the multivariate approach is reliable for the purpose of selection. The alternative tool seems very handy when economic weights are not available or in cases where more rapid identification of the best animals is desired. Interestingly, multivariate analysis allowed forecasting information based on the relationships among breeding values (EPDs). Also, it enabled fine discrimination, rapid data summarization after genetic evaluation, and permitted accounting for maternal ability and the genetic direct potential of the animals. In addition, we recommend the use of longissimus muscle area and subcutaneous fat thickness as selection criteria, to allow estimation of breeding values before the first mating season in order to accelerate the response to individual selection.

  14. EPA Update on Gold King Mine Response: Additional Data Results and Public Records

    EPA Pesticide Factsheets

    WASHINGTON - Today the U.S. Environmental Protection Agency (EPA) released an update on water quality and sediment data for the Animas and San Juan Rivers, as well as additional public records on the Gold King Mine response.

  15. Atom-probe tomography of tribological boundary films resulting from boron-based oil additives

    SciTech Connect

    Kim, Yoon-Jun; Baik, Sung-Il; Bertolucci-Coelho, Leonardo; Mazzaferro, Lucca; Ramirez, Giovanni; Erdemir, Ali; Seidman, D K

    2016-01-15

    Correlative characterization using atom-probe tomography (APT) and transmission electron microscopy (TEM) was performed on a tribofilm formed during sliding frictional testing with a fully formulated engine oil, which also contains a boron-based additive. The tribofilm formed is ~15 nm thick and consists of oxides of iron and compounds of B, Ca, P, and S, which are present in the additive. This study provides strong evidence for boron being embedded in the tribofilm, which effectively reduces friction and wear losses.

  16. Plant interspecific differences in arbuscular mycorrhizal colonization as a result of soil carbon addition.

    PubMed

    Eschen, René; Müller-Schärer, Heinz; Schaffner, Urs

    2013-01-01

    Soil nutrient availability and colonization by arbuscular mycorrhizal fungi are important and potentially interacting factors shaping vegetation composition and succession. We investigated the effect of carbon (C) addition, aimed at reducing soil nutrient availability, on arbuscular mycorrhizal colonization. Seedlings of 27 plant species with different sets of life-history traits (functional group affiliation, life history strategy and nitrophilic status) were grown in pots filled with soil from a nutrient-rich set-aside field and amended with different amounts of C. Mycorrhizal colonization was progressively reduced along the gradient of increasing C addition in 17 out of 27 species, but not in the remaining species. Grasses had lower colonization levels than forbs and legumes and the decline in AM fungal colonization was more pronounced in legumes than in other forbs and grasses. Mycorrhizal colonization did not differ between annual and perennial species, but decreased more rapidly along the gradient of increasing C addition in plants with high Ellenberg N values than in plants with low Ellenberg N values. Soil C addition not only limits plant growth through a reduction in available nutrients, but also reduces mycorrhizal colonization of plant roots. The effect of C addition on mycorrhizal colonization varies among plant functional groups, with legumes experiencing an overproportional reduction in AM fungal colonization along the gradient of increasing C addition. We therefore propose that for a better understanding of vegetation succession on set-aside fields one may consider the interrelationship between plant growth, soil nutrient availability and mycorrhizal colonization of plant roots.

  17. A combination of a dairy product fermented by lactobacilli and galactooligosaccharides shows additive effects on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor.

    PubMed

    Takasugi, Satoshi; Ashida, Kinya; Maruyama, Suyaka; Matsukiyo, Yukari; Kaneko, Tetsuo; Yamaji, Taketo

    2013-06-01

    This study aimed to investigate the effects of a combination of a dairy product fermented by lactobacilli (DFL) and galactooligosaccharides (GOS) on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor (PPI). Three-week-old male rats were assigned to receive one of six diets: a control diet, control diets containing 1.6 or 5.0 % GOS, a DFL diet and DFL diets containing 1.6 or 5.0 % GOS for 9 days. From day 5 of the feeding period, half of the rats fed with control diets were subcutaneously administered with saline, whereas the remaining rats were administered with PPI for 5 days. Calcium (Ca), phosphorus (P), magnesium (Mg), iron (Fe) and zinc (Zn) balances were determined from days 6 to 9. PPI administration significantly decreased the apparent absorption of Ca and Fe and increased urinary P excretion, resulting in decreased Ca, Fe and P retention. GOS dose-dependently increased the apparent absorption of Ca, Mg and Fe and urinary Mg excretion and decreased urinary P excretion. DFL significantly increased the apparent absorption of Ca and Mg and urinary Mg excretion. The combination of DFL and GOS additively affected these parameters, resulting in increased Ca, P and Fe retention, and it further increased the apparent absorption and retention of Zn at 5.0 % GOS. In conclusion, the combination of DFL and GOS improves Ca, P and Fe retention in an additive manner and increases the Zn retention in growing rats with hypochlorhydria induced by PPI.

  18. TANK 40 FINAL SB5 CHEMICAL CHARACTERIZATION RESULTS PRIOR TO NP ADDITION

    SciTech Connect

    Bannochie, C.; Click, D.

    2010-01-06

    A sample of Sludge Batch 5 (SB5) was pulled from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). This sample was also analyzed for chemical composition including noble metals. Prior to radionuclide inventory analyses, a final sample of the H-canyon Np stream will be added to bound the Np addition anticipated for Tank 40. These analyses along with the WAPS radionuclide analyses will help define the composition of the sludge in Tank 40 that is currently being fed to DWPF as SB5. At the Savannah River National Laboratory (SRNL) the 3-L Tank 40 SB5 sample was transferred from the shipping container into a 4-L high density polyethylene vessel and solids allowed to settle overnight. Supernate was then siphoned off and circulated through the shipping container to complete the transfer of the sample. Following thorough mixing of the 3-L sample, a 239 g sub-sample was removed. This sub-sample was then utilized for all subsequent analytical samples. Eight separate aliquots of the slurry were digested, four with HNO{sub 3}/HCl (aqua regia) in sealed Teflon{reg_sign} vessels and four in Na{sub 2}O{sub 2} (alkali or peroxide fusion) using Zr crucibles. Due to the use of Zr crucibles and Na in the peroxide fusions, Na and Zr cannot be determined from this preparation. Additionally, other alkali metals, such as Li and K that may be contaminants in the Na{sub 2}O{sub 2} are not determined from this preparation. Three Analytical Reference Glass - 14 (ARG-1) standards were digested along with a blank for each preparation. The ARG-1 glass allows for an assessment of the completeness of each digestion. Each aqua regia digestion and blank was diluted to 1:100 mL with deionized water and submitted to Analytical Development (AD) for inductively coupled plasma - atomic emission spectroscopy (ICPAES) analysis, inductively coupled plasma - mass spectrometry (ICP-MS) analysis of masses 81-209 and 230

  19. Genomic and Enzymatic Results Show Bacillus cellulosilyticus Uses a Novel Set of LPXTA Carbohydrases to Hydrolyze Polysaccharides

    PubMed Central

    Mead, David; Drinkwater, Colleen; Brumm, Phillip J.

    2013-01-01

    Background Alkaliphilic Bacillus species are intrinsically interesting due to the bioenergetic problems posed by growth at high pH and high salt. Three alkaline cellulases have been cloned, sequenced and expressed from Bacillus cellulosilyticus N-4 (Bcell) making it an excellent target for genomic sequencing and mining of biomass-degrading enzymes. Methodology/Principal Findings The genome of Bcell is a single chromosome of 4.7 Mb with no plasmids present and three large phage insertions. The most unusual feature of the genome is the presence of 23 LPXTA membrane anchor proteins; 17 of these are annotated as involved in polysaccharide degradation. These two values are significantly higher than seen in any other Bacillus species. This high number of membrane anchor proteins is seen only in pathogenic Gram-positive organisms such as Listeria monocytogenes or Staphylococcus aureus. Bcell also possesses four sortase D subfamily 4 enzymes that incorporate LPXTA-bearing proteins into the cell wall; three of these are closely related to each other and unique to Bcell. Cell fractionation and enzymatic assay of Bcell cultures show that the majority of polysaccharide degradation is associated with the cell wall LPXTA-enzymes, an unusual feature in Gram-positive aerobes. Genomic analysis and growth studies both strongly argue against Bcell being a truly cellulolytic organism, in spite of its name. Preliminary results suggest that fungal mycelia may be the natural substrate for this organism. Conclusions/Significance Bacillus cellulosilyticus N-4, in spite of its name, does not possess any of the genes necessary for crystalline cellulose degradation, demonstrating the risk of classifying microorganisms without the benefit of genomic analysis. Bcell is the first Gram-positive aerobic organism shown to use predominantly cell-bound, non-cellulosomal enzymes for polysaccharide degradation. The LPXTA-sortase system utilized by Bcell may have applications both in anchoring

  20. Performance on Addition and Subtraction Problems: Results from Individual Interviews - Sandy Bay Study.

    ERIC Educational Resources Information Center

    Romberg, Thomas A.; And Others

    The purpose of this study was to relate children's cognitive processing capabilities and their grade level to their performance and to the strategies they used when working addition and subtraction problems. From two sets of data which assessed memory capacity and cognitive processing capacities, six groups of children with different cognitive…

  1. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Indirect food additives resulting from packaging..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  2. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Indirect food additives resulting from packaging..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  3. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Indirect food additives resulting from packaging materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... FOOD ADDITIVES General Provisions § 570.13 Indirect food additives resulting from packaging...

  4. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Indirect food additives resulting from packaging..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed...

  5. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Indirect food additives resulting from packaging materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... FOOD ADDITIVES General Provisions § 570.13 Indirect food additives resulting from packaging...

  6. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Indirect food additives resulting from packaging materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... FOOD ADDITIVES General Provisions § 570.13 Indirect food additives resulting from packaging...

  7. Comparing GWAS Results of Complex Traits Using Full Genetic Model and Additive Models for Revealing Genetic Architecture

    PubMed Central

    Monir, Md. Mamun; Zhu, Jun

    2017-01-01

    Most of the genome-wide association studies (GWASs) for human complex diseases have ignored dominance, epistasis and ethnic interactions. We conducted comparative GWASs for total cholesterol using full model and additive models, which illustrate the impacts of the ignoring genetic variants on analysis results and demonstrate how genetic effects of multiple loci could differ across different ethnic groups. There were 15 quantitative trait loci with 13 individual loci and 3 pairs of epistasis loci identified by full model, whereas only 14 loci (9 common loci and 5 different loci) identified by multi-loci additive model. Again, 4 full model detected loci were not detected using multi-loci additive model. PLINK-analysis identified two loci and GCTA-analysis detected only one locus with genome-wide significance. Full model identified three previously reported genes as well as several new genes. Bioinformatics analysis showed some new genes are related with cholesterol related chemicals and/or diseases. Analyses of cholesterol data and simulation studies revealed that the full model performs were better than the additive-model performs in terms of detecting power and unbiased estimations of genetic variants of complex traits. PMID:28079101

  8. Preliminary result on the enhancement of Ufer electrodes using recycle additives materials

    NASA Astrophysics Data System (ADS)

    Zulkifli, Muhammad Haziq Aniq Bin; Ahmad, Hussein Bin

    2016-11-01

    Ground building pillars is to be used as ground rod. The pillars are design, fabricated, and formulated with new ground fillers. The additives will be used from recycle waste materials mainly from the palm oil plant process. Micro scale building pillars will be fabricated and install in the test ground at all of the location. Earth tester meter are used to measure and collect the data of the soil resistivity when the research is conducted. In collecting these data, 3-terminal methods are used to carry the measurements. This experiment will be conducted for 30 weeks and regular measurements at the test ground copper grids will be conducted to measure the ground electrode resistance. The study will mainly base on IEC 62503-3. The used of reinforcing rods and mixture of recycle additives could produce a better grounding system that are suitable and can be used in all kind of soil condition and large industries.

  9. Spinel dissolution via addition of glass forming chemicals. Results of preliminary experiments

    SciTech Connect

    Fox, K. M.; Johnson, F. C.

    2015-11-01

    Increased loading of high level waste in glass can lead to crystallization within the glass. Some crystalline species, such as spinel, have no practical impact on the chemical durability of the glass, and therefore may be acceptable from both a processing and a product performance standpoint. In order to operate a melter with a controlled amount of crystallization, options must be developed for remediating an unacceptable accumulation of crystals. This report describes preliminary experiments designed to evaluate the ability to dissolve spinel crystals in simulated waste glass melts via the addition of glass forming chemicals (GFCs).

  10. A collaborative accountable care model in three practices showed promising early results on costs and quality of care.

    PubMed

    Salmon, Richard B; Sanderson, Mark I; Walters, Barbara A; Kennedy, Karen; Flores, Robert C; Muney, Alan M

    2012-11-01

    Cigna's Collaborative Accountable Care initiative provides financial incentives to physician groups and integrated delivery systems to improve the quality and efficiency of care for patients in commercial open-access benefit plans. Registered nurses who serve as care coordinators employed by participating practices are a central feature of the initiative. They use patient-specific reports and practice performance reports provided by Cigna to improve care coordination, identify and close care gaps, and address other opportunities for quality improvement. We report interim quality and cost results for three geographically and structurally diverse provider practices in Arizona, New Hampshire, and Texas. Although not statistically significant, these early results revealed favorable trends in total medical costs and quality of care, suggesting that a shared-savings accountable care model and collaborative support from the payer can enable practices to take meaningful steps toward full accountability for care quality and efficiency.

  11. Additional results on 'Reducing geometric dilution of precision using ridge regression'

    NASA Astrophysics Data System (ADS)

    Kelly, Robert J.

    1990-07-01

    Kelly (1990) presented preliminary results on the feasibility of using ridge regression (RR) to reduce the effects of geometric dilution of precision (GDOP) error inflation in position-fix navigation systems. Recent results indicate that RR will not reduce GDOP bias inflation when biaslike measurement errors last much longer than the aircraft guidance-loop response time. This conclusion precludes the use of RR on navigation systems whose dominant error sources are biaslike; e.g., the GPS selective-availability error source. The simulation results given by Kelly are, however, valid for the conditions defined. Although RR has not yielded a satisfactory solution to the general GDOP problem, it has illuminated the role that multicollinearity plays in navigation signal processors such as the Kalman filter. Bias inflation, initial position guess errors, ridge-parameter selection methodology, and the recursive ridge filter are discussed.

  12. Male mice housed in groups engage in frequent fighting and show a lower response to additional bone loading than females or individually housed males that do not fight.

    PubMed

    Meakin, Lee B; Sugiyama, Toshihiro; Galea, Gabriel L; Browne, William J; Lanyon, Lance E; Price, Joanna S

    2013-05-01

    Experiments to investigate bone's physiological adaptation to mechanical loading frequently employ models that apply dynamic loads to bones in vivo and assess the changes in mass and architecture that result. It is axiomatic that bones will only show an adaptive response if the applied artificial loading environment differs in a significant way from that to which the bones have been habituated by normal functional loading. It is generally assumed that this normal loading is similar between experimental groups. In the study reported here we found that this was not always the case. Male and female 17-week-old C57BL/6 mice were housed in groups of six, and a single episode (40 cycles) of non-invasive axial loading, engendering 2,200 με on the medial surface of the proximal tibiae in sample mice, was applied to right tibiae on alternate days for two weeks. This engendered an adaptive increase in bone mass in females, but not males. Observation revealed the main difference in behaviour between males and females was that males were involved in fights 1.3 times per hour, whereas the females never fought. We therefore housed all mice individually. In females, there was a similar significant osteogenic response to loading in cortical and trabecular bone of both grouped and individual mice. In contrast, in males, adaptive increases in the loaded compared with non-loaded control bones was only apparent in animals housed individually. Our interpretation of these findings is that the frequent vigorous fighting that occurs between young adult males housed in groups could be sufficient to engender peak strains and strain rates that equal or exceed the stimulus derived from artificial loading. This indicates the importance of ensuring that physical activity is consistent between groups. Reducing the background level of the naturally engendered strain environment allows adaptive responses to artificial loading to be demonstrated at lower loads.

  13. Additional results for 'Sequential design approaches for bioequivalence studies with crossover designs'.

    PubMed

    Montague, Timothy H; Potvin, Diane; Diliberti, Charles E; Hauck, Walter W; Parr, Alan F; Schuirmann, Donald J

    2012-01-01

    In 2008, this group published a paper on approaches for two-stage crossover bioequivalence (BE) studies that allowed for the reestimation of the second-stage sample size based on the variance estimated from the first-stage results. The sequential methods considered used an assumed GMR of 0.95 as part of the method for determining power and sample size. This note adds results for an assumed GMR = 0.90. Two of the methods recommended for GMR = 0.95 in the earlier paper have some unacceptable increases in Type I error rate when the GMR is changed to 0.90. If a sponsor wants to assume 0.90 for the GMR, Method D is recommended. Copyright © 2011 John Wiley & Sons, Ltd.

  14. Volar locking distal radius plates show better short-term results than other treatment options: A prospective randomised controlled trial

    PubMed Central

    Drobetz, Herwig; Koval, Lidia; Weninger, Patrick; Luscombe, Ruth; Jeffries, Paula; Ehrendorfer, Stefan; Heal, Clare

    2016-01-01

    AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necessitate 6 wk wrist immobilisation. METHODS A prospective, randomised controlled single-centre trial was conducted with 56 patients who had a displaced radius fracture were randomised to treatment either with a volar locking plate (n = 29), or another treatment modality (n = 27; cast immobilisation with or without wires or external fixator). Outcomes were measured at 12 wk. Functional outcome scores measured were the Patient-Rated Wrist Evaluation (PRWE) Score; Disabilities of the Arm, Shoulder and Hand and activities of daily living (ADLs). Clinical outcomes were wrist range of motion and grip strength. Radiographic parameters were volar inclination and ulnar variance. RESULTS Patients in the volar locking plate group had significantly better PRWE scores, ADL scores, grip strength and range of extension at three months compared with the control group. All radiological parameters were significantly better in the volar locking plate group at 3 mo. CONCLUSION The present study suggests that volar locking plates produced significantly better functional and clinical outcomes at 3 mo compared with other treatment modalities. Anatomical reduction was significantly more likely to be preserved in the plating group. Level of evidence: II. PMID:27795951

  15. Addition of prothrombin to plasma can result in a paradoxical increase in activated partial thromboplastin time.

    PubMed

    Hansson, Kenny M; Björkqvist, Jenny; Deinum, Johanna

    2014-12-01

    In the activated partial thromboplastin time (APTT) assay, a variety of nonphysiological reagents is used to induce contact activation. The sensitivity of the APTT response for different thrombin inhibitors has previously been found to be dependent on the used reagent. Recently, infusion of prothrombin (FII) has been used in in-vivo coagulopathy models and its effect has been analyzed in different assays. Therefore, we investigated whether the FII plasma concentration might affect APTT using different commercial reagents, applying both turbidimetry and viscometry. We compared both plasma-derived human FII (pd-hFII) and recombinant human FII (r-hFII). Similar results were found for pd-hFII and r-hFII with different APTT reagents. As expected, no effect on APTT was found by increasing the plasma concentration of FII using APTT reagents consisting of ellagic acid (Actin FS or Actin). Although with Pathromtin SL, consisting of SiO2, only a slight increase was found, with most other commercial APTT reagents, consisting of SiO2 or kaolin, APTT dose-dependently increased by increasing concentration of FII. Therefore, both Pathromtin SL and Actin FS were used to compare r-hFII and pd-hFII by determining the KM at 37C using FII-depleted plasma, providing values of 6 ± 0.3 nmol/l FII for both. Thus, at normal plasma concentrations of FII, the maximal initial thrombin generation rate should be reached and no effect on the coagulation time is expected at higher FII concentrations. To completely avoid the paradoxical effect in the APTT assay at FII concentrations higher than normal, Actin or Actin FS is the preferable reagent.

  16. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Task 3 Full-scale Test Results

    SciTech Connect

    Gary Blythe

    2007-05-01

    in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High-sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Plant Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. The pilot-scale tests were completed in 2005 and have been previously reported. This topical report presents the results from the Task 3 full-scale additive tests, conducted at IPL's Petersburg Station Unit 2. The Task 5 full-scale additive tests will be conducted later in calendar year 2007.

  17. Field Testing of a Wet FGD Additive for Enhanced Mercury Control - Task 5 Full-Scale Test Results

    SciTech Connect

    Gary Blythe; MariJon Owens

    2007-12-01

    and reporting. The other four tasks involve field testing on FGD systems, either at pilot or full scale. The four tasks include: Task 2 - Pilot Additive Testing in Texas Lignite Flue Gas; Task 3 - Full-scale FGD Additive Testing in High-sulfur Eastern Bituminous Flue Gas; Task 4 - Pilot Wet Scrubber Additive Tests at Plant Yates; and Task 5 - Full-scale Additive Tests at Plant Yates. The pilot-scale tests and the full-scale test using high-sulfur coal were completed in 2005 and 2006 and have been previously reported. This topical report presents the results from the Task 5 full-scale additive tests, conducted at Southern Company's Plant Yates Unit 1. Both additives were tested there.

  18. Effect of lime addition during sewage sludge treatment on characteristics of resulting SSA when it is used in cementitious materials.

    PubMed

    Vouk, D; Nakic, D; Štirmer, N; Baricevic, A

    2017-02-01

    Final disposal of sewage sludge is important not only in terms of satisfying the regulations, but the aspect of choosing the optimal wastewater treatment technology, including the sludge treatment. In most EU countries, significant amounts of stabilized and dewatered sludge are incinerated, and sewage sludge ash (SSA) is generated as a by product. At the same time, lime is one of the commonly used additives in the sewage sludge treatment primarily to stabilize the sludge. In doing so, the question arose how desirable is such addition of lime if the sludge is subsequently incinerated, and the generated ash is further used in the production of cementitious materials. A series of mortars were prepared where 10-20% of the cement fraction was replaced by SSA. Since all three types of analyzed SSA (without lime, with lime added during sludge stabilization and with extra lime added during sludge incineration) yielded nearly same results, it can be concluded that if sludge incineration is accepted solution, lime addition during sludge treatment is unnecessary even from the standpoint of preserving the pozzolanic properties of the resulting SSA. Results of the research carried out on cement mortars point to the great possibilities of using SSA in concrete industry.

  19. Addition of sargramostim (GM-CSF) to imatinib results in major cytogenetic response in a patient with chronic myeloid leukemia.

    PubMed

    Connor, Rebecca F; Hurd, David; Pettenati, Mark J; Koty, Patrick; Molnár, István

    2006-10-01

    Imatinib mesylate, an inhibitor of BCR/ABL tyrosine kinase, has remarkable activity in chronic myeloid leukemia resulting in an 87% major cytogenetic response. We describe a woman who failed to achieve any cytogenetic response after 2.5 years of imatinib, 400mg daily. When daily sargramostim (GM-CSF) 100 microg/m2 was added, cytogenetic studies revealed a gradual increase in percentage of normal cells from start, 4, 9, and 15 months at 0%, 10%, 55%, and 85%, respectively. She became transfusion independent after starting GM-CSF. The addition of GM-CSF to imatinib resulted in a clinical benefit and a major cytogenetic response in this patient.

  20. [Postoperative results under the new stage classification of lung cancer: the additional reports for those of JACS in 1996].

    PubMed

    Shirakusa, T

    2000-10-01

    This time, in 3008 lung cancer patients, the postoperative results were analyzed under the new stage grouping of TNM classification. All of those patients underwent the operation in 1989, and the 5 year-survival rates had beeb surveyed in 1996 by JACS (The Japanese Association for Chest Surgery). Under the new TNM classification established in 1996 worldwidey, T3N0M0 was transferred from IIIA to IIB. This report is the additional one in the focus of the results accompanied with the change of TNM classification.

  1. Can homeopathy bring additional benefits to thalassemic patients on hydroxyurea therapy? Encouraging results of a preliminary study.

    PubMed

    Banerjee, Antara; Chakrabarty, Sudipa Basu; Karmakar, Susanta Roy; Chakrabarty, Amit; Biswas, Surjyo Jyoti; Haque, Saiful; Das, Debarsi; Paul, Saili; Mandal, Biswapati; Naoual, Boujedaini; Belon, Philippe; Khuda-Bukhsh, Anisur Rahman

    2010-03-01

    Several homeopathic remedies, namely, Pulsatilla Nigricans (30th potency), Ceanothus Americanus (both mother tincture and 6th potency) and Ferrum Metallicum (30th potency) selected as per similia principles were administered to 38 thalassemic patients receiving Hydroxyurea (HU) therapy for a varying period of time. Levels of serum ferritin (SF), fetal hemoglobin (HbF), hemoglobin (Hb), platelet count (PC), mean corpuscular volume (MCV), mean corpuscular hemoglobin concentration (MCHC), mean corpuscular hemoglobin (MCH), white blood cell (WBC) count, bilirubin content, alanine amino transferase (ALT), aspartate amino transferase (AST) and serum total protein content of patients were determined before and 3 months after administration of the homeopathic remedies in combination with HU to evaluate additional benefits, if any, derived by the homeopathic remedies, by comparing the data with those of 38 subjects receiving only HU therapy. Preliminary results indicated that there was a significant decrease in the SF and increase in HbF levels in the combined, treated subjects. Although the changes in other parameters were not so significant, there was a significant decrease in size of spleen in most patients with spleenomegaly and improvement in general health conditions along with an increased gap between transfusions in most patients receiving the combined homeopathic treatment. The homeopathic remedies being inexpensive and without any known side-effects seem to have great potentials in bringing additional benefits to thalassemic patients; particularly in the developing world where blood transfusions suffer from inadequate screening and fall short of the stringent safety standards followed in the developed countries. Further independent studies are encouraged.

  2. Model assessment of additional contamination of water bodies as a result of wildfires in the Chernobyl exclusion zone.

    PubMed

    Bondar, Yu I; Navumau, A D; Nikitin, A N; Brown, J; Dowdall, M

    2014-12-01

    Forest fires and wild fires are recognized as a possible cause of resuspension and redistribution of radioactive substances when occurring on lands contaminated with such materials, and as such are a matter of concern within the regions of Belarus and the Ukraine which were contaminated by the Chernobyl accident in 1986. Modelling the effects of such fires on radioactive contaminants is a complex matter given the number of variables involved. In this paper, a probabilistic model was developed using empirical data drawn from the Polessie State Radiation-Ecological Reserve (PSRER), Belarus, and the Maximum Entropy Method. Using the model, it was possible to derive estimates of the contribution of fire events to overall variability in the levels of (137)Cs and (239,240)Pu in ground air as well as estimates of the deposition of these radionuclides to specific water bodies within the contaminated areas of Belarus. Results indicate that fire events are potentially significant redistributors of radioactive contaminants within the study area and may result in additional contamination being introduced to water bodies.

  3. "The Show"

    ERIC Educational Resources Information Center

    Gehring, John

    2004-01-01

    For the past 16 years, the blue-collar city of Huntington, West Virginia, has rolled out the red carpet to welcome young wrestlers and their families as old friends. They have come to town chasing the same dream for a spot in what many of them call "The Show". For three days, under the lights of an arena packed with 5,000 fans, the…

  4. Additive reductions in zebrafish PRPS1 activity result in a spectrum of deficiencies modeling several human PRPS1-associated diseases

    PubMed Central

    Pei, Wuhong; Xu, Lisha; Varshney, Gaurav K.; Carrington, Blake; Bishop, Kevin; Jones, MaryPat; Huang, Sunny C.; Idol, Jennifer; Pretorius, Pamela R.; Beirl, Alisha; Schimmenti, Lisa A.; Kindt, Katie S.; Sood, Raman; Burgess, Shawn M.

    2016-01-01

    Phosphoribosyl pyrophosphate synthetase-1 (PRPS1) is a key enzyme in nucleotide biosynthesis, and mutations in PRPS1 are found in several human diseases including nonsyndromic sensorineural deafness, Charcot-Marie-Tooth disease-5, and Arts Syndrome. We utilized zebrafish as a model to confirm that mutations in PRPS1 result in phenotypic deficiencies in zebrafish similar to those in the associated human diseases. We found two paralogs in zebrafish, prps1a and prps1b and characterized each paralogous mutant individually as well as the double mutant fish. Zebrafish prps1a mutants and prps1a;prps1b double mutants showed similar morphological phenotypes with increasingly severe phenotypes as the number of mutant alleles increased. Phenotypes included smaller eyes and reduced hair cell numbers, consistent with the optic atrophy and hearing impairment observed in human patients. The double mutant also showed abnormal development of primary motor neurons, hair cell innervation, and reduced leukocytes, consistent with the neuropathy and recurrent infection of the human patients possessing the most severe reductions of PRPS1 activity. Further analyses indicated the phenotypes were associated with a prolonged cell cycle likely resulting from reduced nucleotide synthesis and energy production in the mutant embryos. We further demonstrated the phenotypes were caused by delays in the tissues most highly expressing the prps1 genes. PMID:27425195

  5. Accuracy and Precision in the Southern Hemisphere Additional Ozonesondes (SHADOZ) Dataset in Light of the JOSIE-2000 Results

    NASA Technical Reports Server (NTRS)

    Witte, Jacquelyn C.; Thompson, Anne M.; Schmidlin, F. J.; Oltmans, S. J.; Smit, H. G. J.

    2004-01-01

    Since 1998 the Southern Hemisphere ADditional OZonesondes (SHADOZ) project has provided over 2000 ozone profiles over eleven southern hemisphere tropical and subtropical stations. Balloon-borne electrochemical concentration cell (ECC) ozonesondes are used to measure ozone. The data are archived at: &ttp://croc.gsfc.nasa.gov/shadoz>. In analysis of ozonesonde imprecision within the SHADOZ dataset, Thompson et al. [JGR, 108,8238,20031 we pointed out that variations in ozonesonde technique (sensor solution strength, instrument manufacturer, data processing) could lead to station-to-station biases within the SHADOZ dataset. Imprecisions and accuracy in the SHADOZ dataset are examined in light of new data. First, SHADOZ total ozone column amounts are compared to version 8 TOMS (2004 release). As for TOMS version 7, satellite total ozone is usually higher than the integrated column amount from the sounding. Discrepancies between the sonde and satellite datasets decline two percentage points on average, compared to version 7 TOMS offsets. Second, the SHADOZ station data are compared to results of chamber simulations (JOSE-2000, Juelich Ozonesonde Intercomparison Experiment) in which the various SHADOZ techniques were evaluated. The range of JOSE column deviations from a standard instrument (-10%) in the chamber resembles that of the SHADOZ station data. It appears that some systematic variations in the SHADOZ ozone record are accounted for by differences in solution strength, data processing and instrument type (manufacturer).

  6. Analysis of conservative tracer measurement results using the Frechet distribution at planted horizontal subsurface flow constructed wetlands filled with coarse gravel and showing the effect of clogging processes.

    PubMed

    Dittrich, Ernő; Klincsik, Mihály

    2015-11-01

    A mathematical process, developed in Maple environment, has been successful in decreasing the error of measurement results and in the precise calculation of the moments of corrected tracer functions. It was proved that with this process, the measured tracer results of horizontal subsurface flow constructed wetlands filled with coarse gravel (HSFCW-C) can be fitted more accurately than with the conventionally used distribution functions (Gaussian, Lognormal, Fick (Inverse Gaussian) and Gamma). This statement is true only for the planted HSFCW-Cs. The analysis of unplanted HSFCW-Cs needs more research. The result of the analysis shows that the conventional solutions (completely stirred series tank reactor (CSTR) model and convection-dispersion transport (CDT) model) cannot describe these types of transport processes with sufficient accuracy. These outcomes can help in developing better process descriptions of very difficult transport processes in HSFCW-Cs. Furthermore, a new mathematical process can be developed for the calculation of real hydraulic residence time (HRT) and dispersion coefficient values. The presented method can be generalized to other kinds of hydraulic environments.

  7. T-cell lines from 2 patients with adenosine deaminase (ADA) deficiency showed the restoration of ADA activity resulted from the reversion of an inherited mutation.

    PubMed

    Ariga, T; Oda, N; Yamaguchi, K; Kawamura, N; Kikuta, H; Taniuchi, S; Kobayashi, Y; Terada, K; Ikeda, H; Hershfield, M S; Kobayashi, K; Sakiyama, Y

    2001-05-01

    Inherited deficiency of adenosine deaminase (ADA) results in one of the autosomal recessive forms of severe combined immunodeficiency. This report discusses 2 patients with ADA deficiency from different families, in whom a possible reverse mutation had occurred. The novel mutations were identified in the ADA gene from the patients, and both their parents were revealed to be carriers. Unexpectedly, established patient T-cell lines, not B-cell lines, showed half-normal levels of ADA enzyme activity. Reevaluation of the mutations in these T-cell lines indicated that one of the inherited ADA gene mutations was reverted in both patients. At least one of the patients seemed to possess the revertant cells in vivo; however, the mutant cells might have overcome the revertant after receiving ADA enzyme replacement therapy. These findings may have significant implications regarding the prospects for stem cell gene therapy for ADA deficiency.

  8. How often do German children and adolescents show signs of common mental health problems? Results from different methodological approaches – a cross-sectional study

    PubMed Central

    2014-01-01

    Background Child and adolescent mental health problems are ubiquitous and burdensome. Their impact on functional disability, the high rates of accompanying medical illnesses and the potential to last until adulthood make them a major public health issue. While methodological factors cause variability of the results from epidemiological studies, there is a lack of prevalence rates of mental health problems in children and adolescents according to ICD-10 criteria from nationally representative samples. International findings suggest only a small proportion of children with function impairing mental health problems receive treatment, but information about the health care situation of children and adolescents is scarce. The aim of this epidemiological study was a) to classify symptoms of common mental health problems according to ICD-10 criteria in order to compare the statistical and clinical case definition strategies using a single set of data and b) to report ICD-10 codes from health insurance claims data. Methods a) Based on a clinical expert rating, questionnaire items were mapped on ICD-10 criteria; data from the Mental Health Module (BELLA study) were analyzed for relevant ICD-10 and cut-off criteria; b) Claims data were analyzed for relevant ICD-10 codes. Results According to parent report 7.5% (n = 208) met the ICD-10 criteria of a mild depressive episode and 11% (n = 305) showed symptoms of depression according to cut-off score; Anxiety is reported in 5.6% (n = 156) and 11.6% (n = 323), conduct disorder in 15.2% (n = 373) and 14.6% (n = 357). Self-reported symptoms in 11 to 17 year olds resulted in 15% (n = 279) reporting signs of a mild depression according to ICD-10 criteria (vs. 16.7% (n = 307) based on cut-off) and 10.9% (n = 201) reported symptoms of anxiety (vs. 15.4% (n = 283)). Results from routine data identify 0.9% (n = 1,196) with a depression diagnosis, 3.1% (n = 6,729) with anxiety and 1.4% (n

  9. Transgene silencing of the Hutchinson-Gilford progeria syndrome mutation results in a reversible bone phenotype, whereas resveratrol treatment does not show overall beneficial effects.

    PubMed

    Strandgren, Charlotte; Nasser, Hasina Abdul; McKenna, Tomás; Koskela, Antti; Tuukkanen, Juha; Ohlsson, Claes; Rozell, Björn; Eriksson, Maria

    2015-08-01

    Hutchinson-Gilford progeria syndrome (HGPS) is a rare premature aging disorder that is most commonly caused by a de novo point mutation in exon 11 of the LMNA gene, c.1824C>T, which results in an increased production of a truncated form of lamin A known as progerin. In this study, we used a mouse model to study the possibility of recovering from HGPS bone disease upon silencing of the HGPS mutation, and the potential benefits from treatment with resveratrol. We show that complete silencing of the transgenic expression of progerin normalized bone morphology and mineralization already after 7 weeks. The improvements included lower frequencies of rib fractures and callus formation, an increased number of osteocytes in remodeled bone, and normalized dentinogenesis. The beneficial effects from resveratrol treatment were less significant and to a large extent similar to mice treated with sucrose alone. However, the reversal of the dental phenotype of overgrown and laterally displaced lower incisors in HGPS mice could be attributed to resveratrol. Our results indicate that the HGPS bone defects were reversible upon suppressed transgenic expression and suggest that treatments targeting aberrant progerin splicing give hope to patients who are affected by HGPS.

  10. Additional results on palaeomagnetic stratigraphy of the Koobi Fora Formation, east of Lake Turkana (Lake Rudolf), Kenya

    USGS Publications Warehouse

    Hillhouse, J.W.; Ndombi, J.W.M.; Cox, A.; Brock, A.

    1977-01-01

    The magnetostratigraphy of the hominid-bearing sediments exposed east of Lake Turkana has been strengthened by new palaeomagnetic results. Ages obtained from several tuffs by the 40Ar/39Ar method suggest an approxmate match between the observed magnetozones and the geomagnetic polarity time scale; however, the palaeomagnetic results are also compatible with a younger chronology suggested by conventional K-Ar dating of the KBS Tuff. ?? 1977 Nature Publishing Group.

  11. Estimation of daily aluminum intake in Japan based on food consumption inspection results: impact of food additives

    PubMed Central

    Sato, Kyoko; Suzuki, Ippei; Kubota, Hiroki; Furusho, Noriko; Inoue, Tomoyuki; Yasukouchi, Yoshikazu; Akiyama, Hiroshi

    2014-01-01

    Dietary aluminum (Al) intake by young children, children, youths, and adults in Japan was estimated using the market basket method. The Al content of food category (I–VII) samples for each age group was determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). The Al content in processed foods and unprocessed foods ranged from 0.40 to 21.7 mg/kg and from 0.32 to 0.54 mg/kg, respectively. For processed foods in all age groups, the Al content in food category VI samples, sugar and confections/savories, was the highest, followed by those in category II, cereals. The daily dietary Al intake from processed foods was much larger than that from unprocessed foods. The mean weekly percentages of the provisional tolerable weekly intake (PTWI, established by the joint FAO/WHO Expert Committee on Food Additives in 2011) from processed foods for all age groups are 43.1, 22.4, 17.6 and 15.1%, respectively. Only the highest consumer Al exposure value (>P95) of the young children group exceeded the PTWI. PMID:25473496

  12. A re-examination of paleomagnetic results from NA Jurassic sedimentary rocks: Additional evidence for proposed Jurassic MUTO?

    NASA Astrophysics Data System (ADS)

    Housen, B. A.

    2015-12-01

    Kent and Irving, 2010; and Kent et al, 2015 propose a monster shift in the position of Jurassic (160 to 145 Ma) paleopoles for North America- defined by results from igneous rocks. This monster shift is likely an unrecognized true polar wander occurrence. Although subject to inclination error, results from sedimentary rocks from North America, if corrected for these effects, can be used to supplement the available data for this time period. Steiner (2003) reported results from 48 stratigraphic horizons sampled from the Callovian Summerville Fm, from NE New Mexico. A recalculated mean of these results yields a mean direction of D = 332, I = 39, n=48, k = 15, α95 = 5.4°. These data were analyzed for possible inclination error-although the dataset is small, the E-I results yielded a corrected I = 53. This yields a corrected paleopole for NA at ~165 Ma located at 67° N and 168° E.Paleomagnetic results from the Black Hills- Kilanowski (2002) for the Callovian Hulett Mbr of the Sundance Fm, and Gregiore (2001) the Oxfordian-Tithonian Morrison Fm (Gregiore, 2001) have previously been interpreted to represent Eocene-aged remagnetizations- due to the nearly exact coincidence between the in-situ pole positions of these Jurassic units with the Eocene pole for NA. Both of the tilt-corrected results for these units have high latitude poles (Sundance Fm: 79° N, 146° E; Morrison Fm: 89° N, 165° E). An E-I analysis of these data will be presented- using a provisional inclination error of 10°, corrected paleopoles are: (Sundance Fm: 76° N, 220° E; Morrison Fm: 77° N, 266° E). The Black Hills 165 Ma (Sundance Fm) and 145 Ma (Morrison Fm) poles, provisionally corrected for 10° inclination error- occur fairly close to the NA APWP proposed by Kent et al, 2015- using an updated set of results from kimberlites- the agreement between the Sundance Fm and the Triple-B (158 Ma) pole would be nearly exact with a slightly lesser inclination error. The Summerville Fm- which is

  13. LDLR Database (second edition): new additions to the database and the software, and results of the first molecular analysis.

    PubMed Central

    Varret, M; Rabés, J P; Thiart, R; Kotze, M J; Baron, H; Cenarro, A; Descamps, O; Ebhardt, M; Hondelijn, J C; Kostner, G M; Miyake, Y; Pocovi, M; Schmidt, H; Schuster, H; Stuhrmann, M; Yamamura, T; Junien, C; Béroud, C; Boileau, C

    1998-01-01

    Mutations in the LDL receptor gene (LDLR) cause familial hypercholesterolemia (FH), a common autosomal dominant disorder. The LDLR database is a computerized tool that has been developed to provide tools to analyse the numerous mutations that have been identified in the LDLR gene. The second version of the LDLR database contains 140 new entries and the software has been modified to accommodate four new routines. The analysis of the updated data (350 mutations) gives the following informations: (i) 63% of the mutations are missense, and only 20% occur in CpG dinucleotides; (ii) although the mutations are widely distributed throughout the gene, there is an excess of mutations in exons 4 and 9, and a deficit in exons 13 and 15; (iii) the analysis of the distribution of mutations located within the ligand-binding domain shows that 74% of the mutations in this domain affect a conserved amino-acid, and that they are mostly confined in the C-terminal region of the repeats. Conversely, the same analysis in the EGF-like domain shows that 64% of the mutations in this domain affect a non-conserved amino-acid, and, that they are mostly confined in the N-terminal half of the repeats. The database is now accessible on the World Wide Web at http://www.umd.necker.fr PMID:9399845

  14. Perchloroethylene-contaminated drinking water and the risk of breast cancer: additional results from Cape Cod, Massachusetts, USA.

    PubMed Central

    Aschengrau, Ann; Rogers, Sarah; Ozonoff, David

    2003-01-01

    In 1998 we published the results of a study suggesting an association between breast cancer and perchloroethylene (PCE; also called tetrachloroethylene) exposure from public drinking water. The present case-control study was undertaken to evaluate this association further. The cases were composed of female residents of eight towns in the Cape Cod region of Massachusetts who had been diagnosed with breast cancer from 1987 through 1993 (n = 672). Controls were composed of demographically similar women from the same towns (n = 616). Women were exposed to PCE when it leached from the vinyl lining of water distribution pipes from the late 1960s through the early 1980s. A relative delivered dose of PCE that entered a home was estimated using an algorithm that took into account residential history, water flow, and pipe characteristics. Small to moderate elevations in risk were seen among women whose exposure levels were above the 75th and 90th percentiles when 0-15 years of latency were considered (adjusted odds ratios, 1.5-1.9 for > 75th percentile, 1.3-2.8 for > 90th percentile). When data from the present and prior studies were combined, small to moderate increases in risk were also seen among women whose exposure levels were above the 75th and 90th percentiles when 0-15 years of latency were considered (adjusted odds ratios, 1.6-1.9 for > 75th percentile, 1.3-1.9 for > 90th percentile). The results of the present study confirm those of the previous one and suggest that women with the highest PCE exposure levels have a small to moderate increased risk of breast cancer. PMID:12573900

  15. Storytelling Slide Shows to Improve Diabetes and High Blood Pressure Knowledge and Self-Efficacy: Three-Year Results among Community Dwelling Older African Americans

    ERIC Educational Resources Information Center

    Bertera, Elizabeth M.

    2014-01-01

    This study combined the African American tradition of oral storytelling with the Hispanic medium of "Fotonovelas." A staggered pretest posttest control group design was used to evaluate four Storytelling Slide Shows on health that featured community members. A total of 212 participants were recruited for the intervention and 217 for the…

  16. A homozygous telomerase T-motif variant resulting in markedly reduced repeat addition processivity in siblings with Hoyeraal Hreidarsson syndrome

    PubMed Central

    Gramatges, Maria M.; Qi, Xiaodong; Sasa, Ghadir S.; Chen, Julian J.-L.

    2013-01-01

    Hoyeraal Hreidarsson syndrome (HHS) is a form of dyskeratosis congenita (DC) characterized by bone marrow failure, intrauterine growth retardation, developmental delay, microcephaly, cerebellar hypoplasia, immunodeficiency, and extremely short telomeres. As with DC, mutations in genes encoding factors required for telomere maintenance, such as telomerase reverse transcriptase (TERT), have been found in patients with HHS. We describe 2 sibling HHS cases caused by a homozygous mutation (p.T567M) within the TERT T motif. This mutation resulted in a marked reduction in the capacity of telomerase to processively synthesize telomeric repeats, indicating a role for the T motif in this unique aspect of telomerase function. We support this finding by demonstrating defective processivity in the previously reported p.K570N T-motif mutation. The consanguineous, heterozygous p.T567M parents exhibited telomere lengths around the first percentile and no evidence of a DC phenotype. Although heterozygous processivity defects have been associated with familial, adult-onset pulmonary fibrosis, these cases demonstrate the severe clinical and functional impact of biallelic processivity mutations. Thus, despite retaining the capacity to add short stretches of telomeric repeats onto the shortest telomeres, sole expression of telomerase processivity mutants can lead to a profound failure of telomere maintenance and early-onset multisystem disease. PMID:23538340

  17. Mathematical modelling in Matlab of the experimental results shows the electrochemical potential difference - temperature of the WC coatings immersed in a NaCl solution

    NASA Astrophysics Data System (ADS)

    Benea, M. L.; Benea, O. D.

    2016-02-01

    The method used for purchasing the corrosion behaviour the WC coatings deposited by plasma spraying, on a martensitic stainless steel substrate consists in measuring the electrochemical potential of the coating, respectively that of the substrate, immersed in a NaCl solution as corrosive agent. The mathematical processing of the obtained experimental results in Matlab allowed us to make some correlations between the electrochemical potential of the coating and the solution temperature is very well described by some curves having equations obtained by interpolation order 4.

  18. In axial spondyloarthritis, never smokers, ex-smokers and current smokers show a gradient of increasing disease severity - results from the Scotland Registry for Ankylosing Spondylitis (SIRAS).

    PubMed

    Jones, Gareth T; Ratz, Tiara; Dean, Linda E; Macfarlane, Gary J; Atzeni, Fabiola

    2016-11-29

    Objectives To examine the relationship between smoking, smoking cessation, and disease characteristics/quality of life (QoL) in spondyloarthritis. Methods The Scotland Registry for Ankylosing Spondylitis collects data from clinically diagnosed patients with spondyloarthritis. Clinical data, including Bath Ankylosing Spondylitis indices of disease activity (BASDAI) and function (BASFI), was obtained from medical records. Postal questionnaires provided information on smoking status and QoL (Ankylosing Spondylitis QoL questionnaire; ASQoL). Linear and logistic regression quantified the effect of smoking, and smoking cessation, on various disease-specific and QoL outcomes, adjusting for age, sex, deprivation, education and alcohol status. Results are presented as regression coefficients (β) or odds ratios (OR) with 95% confidence intervals. Results 946 participants provided data (male 73.5%, mean age 52yrs). Current smoking was reported by 22%, and 38% were ex-smokers. Ever smokers experienced poorer BASDAI (β = 0.5; 0.2 to 0.9) and BASFI (β = 0.8; 0.4 to 1.2), and reported worse QoL (ASQoL, β = 1.5; 0.7 to 2.3). Compared to current smokers, ex-smokers reported lower disease activity (BASDAI, β = -0.5; -1.0 to -0.04) and significantly better QoL (ASQoL, β = -1.2; -2.3 to -0.2). They also were more likely to have a uveitis history (OR = 2.4; 1.5 to 3.8). Conclusions Smokers with spondyloarthritis experience worse disease than never smokers. However, we provide new evidence that, among smokers, smoking cessation is associated with lower disease activity and better physical function and QoL. Clinicians should specifically promote smoking cessation as an adjunct to usual therapy in patients with spondyloarthritis. This article is protected by copyright. All rights reserved.

  19. Pulsed addition of HMF and furfural to batch-grown xylose-utilizing Saccharomyces cerevisiae results in different physiological responses in glucose and xylose consumption phase

    PubMed Central

    2013-01-01

    Background Pretreatment of lignocellulosic biomass generates a number of undesired degradation products that can inhibit microbial metabolism. Two of these compounds, the furan aldehydes 5-hydroxymethylfurfural (HMF) and 2-furaldehyde (furfural), have been shown to be an impediment for viable ethanol production. In the present study, HMF and furfural were pulse-added during either the glucose or the xylose consumption phase in order to dissect the effects of these inhibitors on energy state, redox metabolism, and gene expression of xylose-consuming Saccharomyces cerevisiae. Results Pulsed addition of 3.9 g L-1 HMF and 1.2 g L-1 furfural during either the glucose or the xylose consumption phase resulted in distinct physiological responses. Addition of furan aldehydes in the glucose consumption phase was followed by a decrease in the specific growth rate and the glycerol yield, whereas the acetate yield increased 7.3-fold, suggesting that NAD(P)H for furan aldehyde conversion was generated by acetate synthesis. No change in the intracellular levels of NAD(P)H was observed 1 hour after pulsing, whereas the intracellular concentration of ATP increased by 58%. An investigation of the response at transcriptional level revealed changes known to be correlated with perturbations in the specific growth rate, such as protein and nucleotide biosynthesis. Addition of furan aldehydes during the xylose consumption phase brought about an increase in the glycerol and acetate yields, whereas the xylitol yield was severely reduced. The intracellular concentrations of NADH and NADPH decreased by 58 and 85%, respectively, hence suggesting that HMF and furfural drained the cells of reducing power. The intracellular concentration of ATP was reduced by 42% 1 hour after pulsing of inhibitors, suggesting that energy-requiring repair or maintenance processes were activated. Transcriptome profiling showed that NADPH-requiring processes such as amino acid biosynthesis and sulfate and

  20. "First Things First" Shows Promising Results

    ERIC Educational Resources Information Center

    Hendrie, Caroline

    2005-01-01

    In this article, the author discusses a school improvement model, First Things First, developed by James P. Connell, a former tenured professor of psychology at the University of Rochester in New York. The model has three pillars for the high school level: (1) small, themed learning communities that each keep a group of students together…

  1. Results.

    ERIC Educational Resources Information Center

    Zemsky, Robert; Shaman, Susan; Shapiro, Daniel B.

    2001-01-01

    Describes the Collegiate Results Instrument (CRI), which measures a range of collegiate outcomes for alumni 6 years after graduation. The CRI was designed to target alumni from institutions across market segments and assess their values, abilities, work skills, occupations, and pursuit of lifelong learning. (EV)

  2. Comparison of ENDF/B-VII.1 and ENDF/B-VII.0 Results for the Expanded Criticality Validation Suite for MCNP and for Selected Additional Criticality Benchmarks

    NASA Astrophysics Data System (ADS)

    Mosteller, R.

    2014-04-01

    Results obtained with the MCNP5 Monte Carlo code and the ENDF/B-VII.1 and ENDF/B-VII.0 nuclear data libraries have been compared for the 119 benchmarks in the expanded criticality validation suite for MCNP and for 23 additional benchmarks. ENDF/B-VII.1 was found to produce improvements relative to ENDF/B-VII.0 for benchmarks that contain significant amounts of tungsten, zirconium, cadmium, or beryllium, although the results for the benchmarks with beryllium suggest that further improvement still may be needed. In addition, a number of deficiencies previously identified for ENDF/B-VII.0 still remain in ENDF/B-VII.1.

  3. Additive effects of LPL, APOA5 and APOE variant combinations on triglyceride levels and hypertriglyceridemia: results of the ICARIA genetic sub-study

    PubMed Central

    2010-01-01

    Background Hypertriglyceridemia (HTG) is a well-established independent risk factor for cardiovascular disease and the influence of several genetic variants in genes related with triglyceride (TG) metabolism has been described, including LPL, APOA5 and APOE. The combined analysis of these polymorphisms could produce clinically meaningful complementary information. Methods A subgroup of the ICARIA study comprising 1825 Spanish subjects (80% men, mean age 36 years) was genotyped for the LPL-HindIII (rs320), S447X (rs328), D9N (rs1801177) and N291S (rs268) polymorphisms, the APOA5-S19W (rs3135506) and -1131T/C (rs662799) variants, and the APOE polymorphism (rs429358; rs7412) using PCR and restriction analysis and TaqMan assays. We used regression analyses to examine their combined effects on TG levels (with the log-transformed variable) and the association of variant combinations with TG levels and hypertriglyceridemia (TG ≥ 1.69 mmol/L), including the covariates: gender, age, waist circumference, blood glucose, blood pressure, smoking and alcohol consumption. Results We found a significant lowering effect of the LPL-HindIII and S447X polymorphisms (p < 0.0001). In addition, the D9N, N291S, S19W and -1131T/C variants and the APOE-ε4 allele were significantly associated with an independent additive TG-raising effect (p < 0.05, p < 0.01, p < 0.001, p < 0.0001 and p < 0.001, respectively). Grouping individuals according to the presence of TG-lowering or TG-raising polymorphisms showed significant differences in TG levels (p < 0.0001), with the lowest levels exhibited by carriers of two lowering variants (10.2% reduction in TG geometric mean with respect to individuals who were homozygous for the frequent alleles of all the variants), and the highest levels in carriers of raising combinations (25.1% mean TG increase). Thus, carrying two lowering variants was protective against HTG (OR = 0.62; 95% CI, 0.39-0.98; p = 0.042) and having one single raising polymorphism (OR

  4. High frequency transcutaneous electrical nerve stimulation with diphenidol administration results in an additive antiallodynic effect in rats following chronic constriction injury.

    PubMed

    Lin, Heng-Teng; Chiu, Chong-Chi; Wang, Jhi-Joung; Hung, Ching-Hsia; Chen, Yu-Wen

    2015-03-04

    The impact of coadministration of transcutaneous electrical nerve stimulation (TENS) and diphenidol is not well established. Here we estimated the effects of diphenidol in combination with TENS on mechanical allodynia and tumor necrosis factor-α (TNF-α) expression. Using an animal chronic constriction injury (CCI) model, the rat was estimated for evidence of mechanical sensitivity via von Frey hair stimulation and TNF-α expression in the sciatic nerve using the ELISA assay. High frequency (100Hz) TENS or intraperitoneal injection of diphenidol (2.0μmol/kg) was applied daily, starting on postoperative day 1 (POD1) and lasting for the next 13 days. We demonstrated that both high frequency TENS and diphenidol groups had an increase in mechanical withdrawal thresholds of 60%. Coadministration of high frequency TENS and diphenidol gives better results of paw withdrawal thresholds in comparison with high frequency TENS alone or diphenidol alone. Both diphenidol and coadministration of high frequency TENS with diphenidol groups showed a significant reduction of the TNF-α level compared with the CCI or HFS group (P<0.05) in the sciatic nerve on POD7, whereas the CCI or high frequency TENS group exhibited a higher TNF-α level than the sham group (P<0.05). Our resulting data revealed that diphenidol alone, high frequency TENS alone, and the combination produced a reduction of neuropathic allodynia. Both diphenidol and the combination of diphenidol with high frequency TENS inhibited TNF-α expression. A moderately effective dose of diphenidol appeared to have an additive effect with high frequency TENS. Therefore, multidisciplinary treatments could be considered for this kind of mechanical allodynia.

  5. Influence of binder properties, method of addition, powder type and operating conditions on fluid-bed melt granulation and resulting tablet properties.

    PubMed

    Abberger, T

    2001-12-01

    The aim of the study was to investigate melt granulation in a laboratory scale fluid-bed granulator with respect to granule growth, granule properties and resulting tablet properties. The parameters investigated were method of addition of PEG (spray-on or addition as flakes), binder concentration, PEG type (3000, 4000 and 6000, sprayed-on), size (PEG 4000, added as three different sized flakes), powder type (two different sized lactose types and corn starch) and operating conditions (volume air flow and heating temperature). Addition of binder as flakes led to layering as a growth mechanism when the size of the flakes was high. Coalescence occurred when the size was low. Coalescence also occurred when spraying was the method of addition. Due to the greater viscosity of the PEG 6000 melt it produced bigger granules than 3000 or 4000. The influence of volume air flow was moderate and the influence of heating temperature in the range of 70-90 degrees C was very low with both methods of addition. The disintegration time of tablets from granules where PEG was added as flakes was shorter than from granules where PEG was sprayed-on. The latter method of binder addition led to tablets which did not disintegrate but eroded. This was apparently caused by formation of a binder matrix, which could not be destroyed by the disintegrant.

  6. Starch plus sunflower oil addition to the diet of dry dairy cows results in a trans-11 to trans-10 shift of biohydrogenation.

    PubMed

    Zened, A; Enjalbert, F; Nicot, M C; Troegeler-Meynadier, A

    2013-01-01

    Trans fatty acids (FA), exhibit different biological properties. Among them, cis-9,trans-11 conjugated linoleic acid has some interesting putative health properties, whereas trans-10,cis-12 conjugated linoleic acid has negative effects on cow milk fat production and would negatively affect human health. In high-yielding dairy cows, a shift from trans-11 to trans-10 pathway of biohydrogenation (BH) can occur in the rumen of cows receiving high-concentrate diets, especially when the diet is supplemented with unsaturated fat sources. To study this shift, 4 rumen-fistulated nonlactating Holstein cows were assigned to a 4×4 Latin square design with 4 different diets during 4 periods. Cows received 12 kg of dry matter per day of 4 diets based on corn silage during 4 successive periods: a control diet (22% starch, <3% crude fat on DM basis), a high-starch diet supplemented with wheat plus barley (35% starch, <3% crude fat), a sunflower oil diet supplemented with 5% of sunflower oil (20% starch, 7.6% crude fat), and a high-starch plus sunflower oil diet (33% starch, 7.3% crude fat). Five hours after feeding, proportions of trans-11 BH isomers greatly increased in the rumen content with the addition of sunflower oil, without change in ruminal pH compared with the control diet. Addition of starch to the control diet had no effect on BH pathways but decreased ruminal pH. The addition of a large amount of starch in association with sunflower oil increased trans-10 FA at the expense of trans-11 FA in the rumen content, revealing a trans-11 to trans-10 shift. Interestingly, with this latter diet, ruminal pH did not change compared with a single addition of starch. This trans-11 to trans-10 shift occurred progressively, after a decrease in the proportion of trans-11 FA in the rumen, suggesting that this shift could result from a dysbiosis in the rumen in favor of trans-10-producing bacteria at the expense of those producing trans-11 or a modification of bacterial activities.

  7. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  8. High SO{sub 2} removal efficiency testing: Results of DBA and sodium formate additive tests at Southwestern Electric Power company`s Pirkey Station

    SciTech Connect

    1996-05-30

    Tests were conducted at Southwestern Electric Power Company`s (SWEPCo) Henry W. Pirkey Station wet limestone flue gas desulfurization (FGD) system to evaluate options for achieving high sulfur dioxide removal efficiency. The Pirkey FGD system includes four absorber modules, each with dual slurry recirculation loops and with a perforated plate tray in the upper loop. The options tested involved the use of dibasic acid (DBA) or sodium formate as a performance additive. The effectiveness of other potential options was simulated with the Electric Power Research Institute`s (EPRI) FGD PRocess Integration and Simulation Model (FGDPRISM) after it was calibrated to the system. An economic analysis was done to determine the cost effectiveness of the high-efficiency options. Results are-summarized below.

  9. The Great Cometary Show

    NASA Astrophysics Data System (ADS)

    2007-01-01

    coming from the nova. The stream of results from the VLTI and AMBER is no doubt going to increase in the coming years with the availability of new functionalities. "In addition to the 8.2-m Unit Telescopes, the VLTI can also combine the light from up to 4 movable 1.8-m Auxiliary Telescopes. AMBER fed by three of these AT's will be offered to the user community as of April this year, and from October we will also make FINITO available," said Melnick. "This 'fringe-tracking' device allows us to stabilise changes in the atmospheric conditions and thus to substantially improve the efficiency of the observations. By effectively 'freezing' the interferometric fringes, FINITO allows astronomers to significantly increase the exposure times." The Astronomy & Astrophysics special feature (volume 464 - March II 2007) on AMBER first results includes 11 articles. They are freely available on the A&A web site.

  10. BPI-ANCA Provides Additional Clinical Information to Anti-Pseudomonas Serology: Results from a Cohort of 117 Swedish Cystic Fibrosis Patients.

    PubMed

    Lindberg, Ulrika; Carlsson, Malin; Hellmark, Thomas; Segelmark, Mårten

    2015-01-01

    Patients with cystic fibrosis (CF) colonized with Pseudomonas aeruginosa (P. aeruginosa) have worse prognosis compared with patients who are not. BPI-ANCA is an anti-neutrophil cytoplasmic antibody against BPI (bactericidal/permeability increasing protein) correlating with P. aeruginosa colonization and adverse long time prognosis. Whether it provides additional information as compared to standard anti-P. aeruginosa serology tests is not known. 117 nontransplanted CF patients at the CF centre in Lund, Sweden, were followed prospectively for ten years. Bacterial colonisation was classified according to the Leeds criteria. IgA BPI-ANCA was compared with assays for antibodies against alkaline protease (AP), Elastase (ELA), and Exotoxin A (ExoA). Lung function and patient outcome, alive, lung transplanted, or dead, were registered. BPI-ANCA showed the highest correlation with lung function impairment with an r-value of 0.44. Forty-eight of the 117 patients were chronically colonized with P. aeruginosa. Twenty of these patients experienced an adverse outcome. Receiver operator curve (ROC) analysis revealed that this could be predicted by BPI-ANCA (AUC = 0.77), (p = 0.002) to a better degree compared with serology tests. BPI-ANCA correlates better with lung function impairment and long time prognosis than anti-P. aeruginosa serology and has similar ability to identify patients with chronic P. aeruginosa.

  11. Assessment of the improvements in accuracy of aerosol characterization resulted from additions of polarimetric measurements to intensity-only observations using GRASP algorithm (Invited)

    NASA Astrophysics Data System (ADS)

    Dubovik, O.; Litvinov, P.; Lapyonok, T.; Herman, M.; Fedorenko, A.; Lopatin, A.; Goloub, P.; Ducos, F.; Aspetsberger, M.; Planer, W.; Federspiel, C.

    2013-12-01

    During last few years we were developing GRASP (Generalized Retrieval of Aerosol and Surface Properties) algorithm designed for the enhanced characterization of aerosol properties from spectral, multi-angular polarimetric remote sensing observations. The concept of GRASP essentially relies on the accumulated positive research heritage from previous remote sensing aerosol retrieval developments, in particular those from the AERONET and POLDER retrieval activities. The details of the algorithm are described by Dubovik et al. (Atmos. Meas. Tech., 4, 975-1018, 2011). The GRASP retrieves properties of both aerosol and land surface reflectance in cloud-free environments. It is based on highly advanced statistically optimized fitting and deduces nearly 50 unknowns for each observed site. The algorithm derives a similar set of aerosol parameters as AERONET including detailed particle size distribution, the spectrally dependent the complex index of refraction and the fraction of non-spherical particles. The algorithm uses detailed aerosol and surface models and fully accounts for all multiple interactions of scattered solar light with aerosol, gases and the underlying surface. All calculations are done on-line without using traditional look-up tables. In addition, the algorithm uses the new multi-pixel retrieval concept - a simultaneous fitting of a large group of pixels with additional constraints limiting the time variability of surface properties and spatial variability of aerosol properties. This principle is expected to result in higher consistency and accuracy of aerosol products compare to conventional approaches especially over bright surfaces where information content of satellite observations in respect to aerosol properties is limited. The GRASP is a highly versatile algorithm that allows input from both satellite and ground-based measurements. It also has essential flexibility in measurement processing. For example, if observation data set includes spectral

  12. Thermochemical properties, rotation barriers, and group additivity for unsaturated oxygenated hydrocarbons and radicals resulting from reaction of vinyl and phenyl radical systems with O2.

    PubMed

    Sebbarand, Nadia; Bockhorn, Henning; Bozzelli, Joseph W

    2005-03-17

    Oxidation of unsaturated and aromatic hydrocarbons in atmospheric and combustion processes results in formation of linear and cyclic unsaturated, oxygenated-hydrocarbon intermediates. The thermochemical parameters delatafH degrees 298, S degrees 298, and C(p)(f298)(T) for these intermediates are needed to understand their stability and reaction paths in further oxidation. These properties are not available for a majority of these unsaturated oxy-hydrocarbons and their corresponding radicals, even via group additivity methods. Enthalpy, entropy, and heat capacity of a series of 40 oxygenated and non-oxygenated molecules, or radicals corresponding to hydrogen atom loss from the parent stable molecules are determined in this study. Enthalpy (delatafH degrees 298 in kcal mol(-1)) is derived from the density function calculations at the B3LYP/6-311g(d,p) calculated enthalpy of reaction (delatafH degrees rxn,298) and by use of isodesmic (work) reactions. Estimation of error in enthalpy delatafH degrees 298, from use of computational chemistry coupled with work reactions analysis, is presented using comparisons between the calculated and literature enthalpies of reaction. Entropies (S degrees 298) and heat capacities (C(p)(f298)(T)) were calculated using the B3LYP/6-311G(d,p) determined frequencies and geometries. Potential barriers for internal rotors in each molecule were determined and used (in place of torsion frequencies) to calculate contributions to S and C(p)(T) from the hindered rotors. Twenty-six groups for use in group additivity (GA) are also developed.

  13. SU-E-J-06: Additional Imaging Guidance Dose to Patient Organs Resulting From X-Ray Tubes Used in CyberKnife Image Guidance System

    SciTech Connect

    Sullivan, A; Ding, G

    2015-06-15

    Purpose: The use of image-guided radiation therapy (IGRT) has become increasingly common, but the additional radiation exposure resulting from repeated image guidance procedures raises concerns. Although there are many studies reporting imaging dose from different image guidance devices, imaging dose for the CyberKnife Robotic Radiosurgery System is not available. This study provides estimated organ doses resulting from image guidance procedures on the CyberKnife system. Methods: Commercially available Monte Carlo software, PCXMC, was used to calculate average organ doses resulting from x-ray tubes used in the CyberKnife system. There are seven imaging protocols with kVp ranging from 60 – 120 kV and 15 mAs for treatment sites in the Cranium, Head and Neck, Thorax, and Abdomen. The output of each image protocol was measured at treatment isocenter. For each site and protocol, Adult body sizes ranging from anorexic to extremely obese were simulated since organ dose depends on patient size. Doses for all organs within the imaging field-of-view of each site were calculated for a single image acquisition from both of the orthogonal x-ray tubes. Results: Average organ doses were <1.0 mGy for every treatment site and imaging protocol. For a given organ, dose increases as kV increases or body size decreases. Higher doses are typically reported for skeletal components, such as the skull, ribs, or clavicles, than for softtissue organs. Typical organ doses due to a single exposure are estimated as 0.23 mGy to the brain, 0.29 mGy to the heart, 0.08 mGy to the kidneys, etc., depending on the imaging protocol and site. Conclusion: The organ doses vary with treatment site, imaging protocol and patient size. Although the organ dose from a single image acquisition resulting from two orthogonal beams is generally insignificant, the sum of repeated image acquisitions (>100) could reach 10–20 cGy for a typical treatment fraction.

  14. High SO{sub 2} removal efficiency testing. Topical report - results of sodium formate additive tests at New York State Electric & Gas Corporation`s Kintigh Station

    SciTech Connect

    Murphy, J.

    1997-02-14

    Tests were conducted at New York State Gas & Electric`s (NYSEG`s) Kintigh Station to evaluate options for achieving high sulfur dioxide (SO{sub 2}) removal efficiency in the wet limestone flue gas desulfurization (FGD) system. This test program was one of six conducted by the U.S. Department of Energy to evaluate low-capital-cost upgrades to existing FGD systems as a means for utilities to comply with the requirements of the 1990 Clean Air Act Amendments. The upgrade option tested at Kintigh was sodium formate additive. Results from the tests were used to calibrate the Electric Power Research Institute`s (EPRI) FGD PRocess Integration and Simulation Model (FGDPRISM) to the Kintigh scrubber configuration. FGDPRISM was then used to predict system performance for evaluating conditions other than those tested. An economic evaluation was then done to determine the cost effectiveness of various high-efficiency upgrade options. These costs can be compared with the estimated market value of SO{sub 2} allowance or the expected costs of allowances generated by other means, such as fuel switching or new scrubbers, to arrive at the most cost-effective strategy for Clean Air Act compliance.

  15. Mucoid Pseudomonas aeruginosa caused by mucA mutations result in activation of TLR2 in addition to TLR5 in airway epithelial cells.

    PubMed

    Beaudoin, Trevor; Lafayette, Shantelle; Nguyen, Dao; Rousseau, Simon

    2012-11-09

    The presence of the mucoid phenotype of Pseudomonas aeruginosa is a marker of poor survival in cystic fibrosis. As CF lung disease results from chronic infection leading to airway inflammation, we determined whether the switch to a mucoid phenotype by P. aeruginosa has an impact on the inflammatory response of airway epithelial cells. Exposure of airway epithelial cells to non-mucoid and mucoid P. aeruginosa-derived material leads to p38α MAPK activation, a key protein kinase involved in transmitting inflammatory signals. However, while the non-mucoid strain PAO1 activates p38α MAPK pathway solely via TLR5, the mucoid strain PACF508 activates p38α MAPK via both TLR5 and TLR2. Inactivation of mucA (the gene responsible for the mucoid phenotype) in PAO1 leads to p38α MAPK activation by both TLR2 and TLR5, as observed in the clinical mucoid isolate PACF508. Therefore, the switch to mucoid phenotype may contribute to more inflammation via TLR2 activation in addition to TLR5. Our findings highlight an important and under recognized role for TLR2 in the response of airway epithelial cells to infection.

  16. Accuracy and Precision in the Southern Hemisphere Additional Ozonesondes (SHADOZ) Dataset 1998-2000 in Light of the JOSIE-2000 Results

    NASA Technical Reports Server (NTRS)

    Witte, J. C.; Thompson, A. M.; Schmidlin, F. J.; Oltmans, S. J.; McPeters, R. D.; Smit, H. G. J.

    2003-01-01

    A network of 12 southern hemisphere tropical and subtropical stations in the Southern Hemisphere ADditional OZonesondes (SHADOZ) project has provided over 2000 profiles of stratospheric and tropospheric ozone since 1998. Balloon-borne electrochemical concentration cell (ECC) ozonesondes are used with standard radiosondes for pressure, temperature and relative humidity measurements. The archived data are available at:http: //croc.gsfc.nasa.gov/shadoz. In Thompson et al., accuracies and imprecisions in the SHADOZ 1998- 2000 dataset were examined using ground-based instruments and the TOMS total ozone measurement (version 7) as references. Small variations in ozonesonde technique introduced possible biases from station-to-station. SHADOZ total ozone column amounts are now compared to version 8 TOMS; discrepancies between the two datasets are reduced 2\\% on average. An evaluation of ozone variations among the stations is made using the results of a series of chamber simulations of ozone launches (JOSIE-2000, Juelich Ozonesonde Intercomparison Experiment) in which a standard reference ozone instrument was employed with the various sonde techniques used in SHADOZ. A number of variations in SHADOZ ozone data are explained when differences in solution strength, data processing and instrument type (manufacturer) are taken into account.

  17. National Orange Show Photovoltaic Demonstration

    SciTech Connect

    Dan Jimenez Sheri Raborn, CPA; Tom Baker

    2008-03-31

    National Orange Show Photovoltaic Demonstration created a 400KW Photovoltaic self-generation plant at the National Orange Show Events Center (NOS). The NOS owns a 120-acre state fairground where it operates an events center and produces an annual citrus fair known as the Orange Show. The NOS governing board wanted to employ cost-saving programs for annual energy expenses. It is hoped the Photovoltaic program will result in overall savings for the NOS, help reduce the State's energy demands as relating to electrical power consumption, improve quality of life within the affected grid area as well as increase the energy efficiency of buildings at our venue. In addition, the potential to reduce operational expenses would have a tremendous effect on the ability of the NOS to service its community.

  18. Risk stratification of thyroid nodules with Bethesda category III results on fine-needle aspiration cytology: The additional value of acoustic radiation force impulse elastography

    PubMed Central

    Zhao, Chong-Ke; Xu, Hui-Xiong; Xu, Jun-Mei; Sun, Cheng-Yu; Chen, Wei; Liu, Bo-Ji; Bo, Xiao-Wan; Wang, Dan; Qu, Shen

    2017-01-01

    To assess the value of conventional ultrasound, conventional strain elastography (CSE) and acoustic radiation force impulse (ARFI) elastography in differentiating likelihood of malignancy for Bethesda category III thyroid nodules. 103 thyroid nodules with Bethesda category III results on fine-needle aspiration cytology (FNAC) in 103 patients were included and all were pathologically confirmed after surgery. Conventional ultrasound, CSE and ARFI elastography including ARFI imaging and point shear wave speed (SWS) measurement were performed. Univariate and multivariate analyses were performed to identify the independent factors associated with malignancy. Area under the receiver operating characteristic curve (Az) was calculated to assess the diagnostic performance. Pathologically, 65 nodules were benign and 38 were malignant. Significant differences were found between benign and malignant nodules in ARFI. The cut-off points were ARFI imaging grade ≥ 4, SWS > 2.94 m/s and SWS ratio > 1.09, respectively. ARFI imaging (Az: 0.861) had the highest diagnostic performance to differentiate malignant from benign nodules, following by conventional ultrasound (Az: 0.606 - 0.744), CSE (Az: 0.660) and point SWS measurement (Az: 0.725 - 0.735). Multivariate logistic regression analysis showed that ARFI imaging grade ≥ 4 was the most significant independent predictor. The combination of ARFI imaging with point SWS measurement significantly improved the specificity (100% vs. 80.0%) and positive predictive value (100 % vs. 72.9%) in comparison with ARFI imaging alone. ARFI elastography is a useful tool in differentiating malignant from benign thyroid nodules with Bethesda category III results on FNAC. PMID:27906671

  19. Risk stratification of thyroid nodules with Bethesda category III results on fine-needle aspiration cytology: The additional value of acoustic radiation force impulse elastography.

    PubMed

    Zhao, Chong-Ke; Xu, Hui-Xiong; Xu, Jun-Mei; Sun, Cheng-Yu; Chen, Wei; Liu, Bo-Ji; Bo, Xiao-Wan; Wang, Dan; Qu, Shen

    2017-01-03

    To assess the value of conventional ultrasound, conventional strain elastography (CSE) and acoustic radiation force impulse (ARFI) elastography in differentiating likelihood of malignancy for Bethesda category III thyroid nodules. 103 thyroid nodules with Bethesda category III results on fine-needle aspiration cytology (FNAC) in 103 patients were included and all were pathologically confirmed after surgery. Conventional ultrasound, CSE and ARFI elastography including ARFI imaging and point shear wave speed (SWS) measurement were performed. Univariate and multivariate analyses were performed to identify the independent factors associated with malignancy. Area under the receiver operating characteristic curve (Az) was calculated to assess the diagnostic performance. Pathologically, 65 nodules were benign and 38 were malignant. Significant differences were found between benign and malignant nodules in ARFI. The cut-off points were ARFI imaging grade ≥ 4, SWS > 2.94 m/s and SWS ratio > 1.09, respectively. ARFI imaging (Az: 0.861) had the highest diagnostic performance to differentiate malignant from benign nodules, following by conventional ultrasound (Az: 0.606 - 0.744), CSE (Az: 0.660) and point SWS measurement (Az: 0.725 - 0.735). Multivariate logistic regression analysis showed that ARFI imaging grade ≥ 4 was the most significant independent predictor. The combination of ARFI imaging with point SWS measurement significantly improved the specificity (100% vs. 80.0%) and positive predictive value (100 % vs. 72.9%) in comparison with ARFI imaging alone. ARFI elastography is a useful tool in differentiating malignant from benign thyroid nodules with Bethesda category III results on FNAC.

  20. Association Between Single-Nucleotide Polymorphisms in Hormone Metabolism and DNA Repair Genes and Epithelial Ovarian Cancer: Results from Two Australian Studies and an Additional Validation Set

    PubMed Central

    Beesley, Jonathan; Jordan, Susan J.; Spurdle, Amanda B.; Song, Honglin; Ramus, Susan J.; Kjaer, Suzanne Kruger; Hogdall, Estrid; DiCioccio, Richard A.; McGuire, Valerie; Whittemore, Alice S.; Gayther, Simon A.; Pharoah, Paul D.P.; Webb, Penelope M.; Chenevix-Trench, Georgia

    2009-01-01

    Although some high-risk ovarian cancer genes have been identified, it is likely that common low penetrance alleles exist that confer some increase in ovarian cancer risk. We have genotyped nine putative functional single-nucleotide polymorphisms (SNP) in genes involved in steroid hormone synthesis (SRD5A2, CYP19A1, HSB17B1, and HSD17B4) and DNA repair (XRCC2, XRCC3, BRCA2, and RAD52) using two Australian ovarian cancer case-control studies, comprising a total of 1,466 cases and 1,821 controls of Caucasian origin. Genotype frequencies in cases and controls were compared using logistic regression. The only SNP we found to be associated with ovarian cancer risk in both of these two studies was SRD5A2 V89L (rs523349), which showed a significant trend of increasing risk per rare allele (P = 0.00002). We then genotyped another SNP in this gene (rs632148; r2 = 0.945 with V89L) in an attempt to validate this finding in an independent set of 1,479 cases and 2,452 controls from United Kingdom, United States, and Denmark. There was no association between rs632148 and ovarian cancer risk in the validation samples, and overall, there was no significant heterogeneity between the results of the five studies. Further analyses of SNPs in this gene are therefore warranted to determine whether SRD5A2 plays a role in ovarian cancer predisposition. PMID:18086758

  1. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  2. Removal of strontium and transuranics from Hanford tank waste via addition of metal cations and chemical oxidant: FY 1995 test results

    SciTech Connect

    Orth, R.J.; Zacher, A.H.; Schmidt, A.J.; Elmore, M.R.; Elliott, K.R.; Neuenschwander, G.G.; Gano, S.R.

    1995-09-01

    Chelating organics and some of their degradation products in the Hanford tank waste, such as EDTA, HEDTA, and NTA act to solubilize strontium and transuranics (TRU) in the tank waste supernatant. Displacement of strontium and TRU will facilitate the removal of these radionuclides via precipitation/filtration, ion exchange, or solvent extraction so that low-level waste feed specifications can be met. Pacific Northwest Laboratory has investigated two methods for releasing organic-complexed strontium and TRU components to allow for effective pretreatment of tank waste supernatant: metal cation addition (to promote displacement and flocculation) and chemical oxidant (pennanganate) addition (to promote chelator destruction/defunctionalization and possibly flocculation). These methods, which can be conducted at near-ambient. temperatures and pressures, could be deployed as intank processes.

  3. Public medical shows.

    PubMed

    Walusinski, Olivier

    2014-01-01

    In the second half of the 19th century, Jean-Martin Charcot (1825-1893) became famous for the quality of his teaching and his innovative neurological discoveries, bringing many French and foreign students to Paris. A hunger for recognition, together with progressive and anticlerical ideals, led Charcot to invite writers, journalists, and politicians to his lessons, during which he presented the results of his work on hysteria. These events became public performances, for which physicians and patients were transformed into actors. Major newspapers ran accounts of these consultations, more like theatrical shows in some respects. The resultant enthusiasm prompted other physicians in Paris and throughout France to try and imitate them. We will compare the form and substance of Charcot's lessons with those given by Jules-Bernard Luys (1828-1897), Victor Dumontpallier (1826-1899), Ambroise-Auguste Liébault (1823-1904), Hippolyte Bernheim (1840-1919), Joseph Grasset (1849-1918), and Albert Pitres (1848-1928). We will also note their impact on contemporary cinema and theatre.

  4. Food additives

    MedlinePlus

    ... or natural. Natural food additives include: Herbs or spices to add flavor to foods Vinegar for pickling ... Certain colors improve the appearance of foods. Many spices, as well as natural and man-made flavors, ...

  5. Additional results for "joint entropy of continuously differentiable ultrasonic waveforms" [J. Acoust. Soc. Am. 133(1), 283-300 (2013)].

    PubMed

    Hughes, M S; Marsh, J N; Wickline, S A; McCarthy, J E

    2015-01-01

    Previous results on the use of joint entropy for detection of targeted nanoparticles accumulating in the neovasculature of MDA435 tumors [Fig. 7 of M. S. Hughes et al., J. Acoust. Soc. Am. 133, 283-300 (2013)] are extended, with sensitivity improving by nearly another factor of 2. This result is obtained using a "quasi-optimal" reference waveform in the computation of the joint entropy imaging technique used to image the accumulating nanoparticles.

  6. Television Quiz Show Simulation

    ERIC Educational Resources Information Center

    Hill, Jonnie Lynn

    2007-01-01

    This article explores the simulation of four television quiz shows for students in China studying English as a foreign language (EFL). It discusses the adaptation and implementation of television quiz shows and how the students reacted to them.

  7. Planning a Successful Tech Show

    ERIC Educational Resources Information Center

    Nikirk, Martin

    2011-01-01

    Tech shows are a great way to introduce prospective students, parents, and local business and industry to a technology and engineering or career and technical education program. In addition to showcasing instructional programs, a tech show allows students to demonstrate their professionalism and skills, practice public presentations, and interact…

  8. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial

    PubMed Central

    Rule, Simon; Smith, Paul; Johnson, Peter W.M.; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F.; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-01-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network. PMID:26611473

  9. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial.

    PubMed

    Rule, Simon; Smith, Paul; Johnson, Peter W M; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-02-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network.

  10. "Show and Tell" Persuasion

    ERIC Educational Resources Information Center

    Miller, Virgil R.

    2004-01-01

    Objective: To engage in the process of formulating compelling persuasive arguments. Type of speech: Persuasive. Point value: Incorporated into participation points. Requirements: (a) References: 0; (b) Length: 1-2 minutes; (c) Visual aid: No; (d) Outline: No; (e) Prerequisite reading: Chapter 19 (DeVito, 2003); (f) Additional requirements: None.…

  11. Structure of transition-metal cluster compounds: Use of an additional orbital resulting from the f, g character of spd bond orbitals*

    PubMed Central

    Pauling, Linus

    1977-01-01

    A general theory of the structure of complexes of the transition metals is developed on the basis of the enneacovalence of the metals and the requirements of the electroneutrality principle. An extra orbital may be provided through the small but not negligible amount of f and g character of spd bond orbitals, and an extra electron or electron pair may be accepted in this orbital for a single metal or a cluster to neutralize the positive electric charge resulting from the partial ionic character of the bonds with ligands, such as the carbonyl group. Examples of cluster compounds of cobalt, ruthenium, rhodium, osmium, and gold are discussed. PMID:16592470

  12. Does early intensive multifactorial therapy reduce modelled cardiovascular risk in individuals with screen-detected diabetes? Results from the ADDITION-Europe cluster randomized trial

    PubMed Central

    Black, J A; Sharp, S J; Wareham, N J; Sandbæk, A; Rutten, G E H M; Lauritzen, T; Khunti, K; Davies, M J; Borch-Johnsen, K; Griffin, S J; Simmons, R K

    2014-01-01

    Aims Little is known about the long-term effects of intensive multifactorial treatment early in the diabetes disease trajectory. In the absence of long-term data on hard outcomes, we described change in 10-year modelled cardiovascular risk in the 5 years following diagnosis, and quantified the impact of intensive treatment on 10-year modelled cardiovascular risk at 5 years. Methods In a pragmatic, cluster-randomized, parallel-group trial in Denmark, the Netherlands and the UK, 3057 people with screen-detected Type 2 diabetes were randomized by general practice to receive (1) routine care of diabetes according to national guidelines (1379 patients) or (2) intensive multifactorial target-driven management (1678 patients). Ten-year modelled cardiovascular disease risk was calculated at baseline and 5 years using the UK Prospective Diabetes Study Risk Engine (version 3β). Results Among 2101 individuals with complete data at follow up (73.4%), 10-year modelled cardiovascular disease risk was 27.3% (sd 13.9) at baseline and 21.3% (sd 13.8) at 5-year follow-up (intensive treatment group difference –6.9, sd 9.0; routine care group difference –5.0, sd 12.2). Modelled 10-year cardiovascular disease risk was lower in the intensive treatment group compared with the routine care group at 5 years, after adjustment for baseline cardiovascular disease risk and clustering (–2.0; 95% CI –3.1 to –0.9). Conclusions Despite increasing age and diabetes duration, there was a decline in modelled cardiovascular disease risk in the 5 years following diagnosis. Compared with routine care, 10-year modelled cardiovascular disease risk was lower in the intensive treatment group at 5 years. Our results suggest that patients benefit from intensive treatment early in the diabetes disease trajectory, where the rate of cardiovascular disease risk progression may be slowed. PMID:24533664

  13. Effect of Using Local Intrawound Vancomycin Powder in Addition to Intravenous Antibiotics in Posterior Lumbar Surgery: Midterm Result in a Single-Center Study

    PubMed Central

    Lee, Gun-Ill; Chun, Hyoung-Joon; Choi, Kyu-Sun

    2016-01-01

    Objective We conducted this study to report the efficacy of local application of vancomycin powder in the setting of surgical site infection (SSI) of posterior lumbar surgical procedures and to figure out risk factors of SSIs. Methods From February 2013 to December 2013, SSI rates following 275 posterior lumbar surgeries of which intrawound vancomycin powder was used in combination with intravenous antibiotics (Vanco group) were assessed. Compared with 296 posterior lumbar procedures with intravenous antibiotic only group from February 2012 to December 2012 (non-Vanco group), various infection rates were assessed. Univariate and multivariate analysis to figure out risk factors of infection among Vanco group were done. Results Statistically significant reduction of SSI in Vanco group (5.5%) from non-Vanco group (10.5%) was confirmed (p=0.028). Mean follow-up period was 8 months. Rate of acute staphylococcal SSIs reduced statistically significantly to 4% compared to 7.4% of non-Vanco group (p=0.041). Deep staphylococcal infection decreased to 2 compared to 8 and deep methicillin-resistant Staphylococcus aureus infection also decreased to 1 compared to 5 in non-Vanco group. No systemic complication was observed. Statistically significant risk factors associated with SSI were diabetes mellitus, history of cardiovascular disease, length of hospital stay, number of instrumented level and history of previous surgery. Conclusion In this series of 571 patients, intrawound vancomycin powder usage resulted in significant decrease in SSI rates in our posterior lumbar surgical procedures. Patients at high risk of infection are highly recommended as a candidate for this technique. PMID:27437012

  14. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  15. Stretched View Showing 'Victoria'

    NASA Technical Reports Server (NTRS)

    2006-01-01

    [figure removed for brevity, see original site] Stretched View Showing 'Victoria'

    This pair of images from the panoramic camera on NASA's Mars Exploration Rover Opportunity served as initial confirmation that the two-year-old rover is within sight of 'Victoria Crater,' which it has been approaching for more than a year. Engineers on the rover team were unsure whether Opportunity would make it as far as Victoria, but scientists hoped for the chance to study such a large crater with their roving geologist. Victoria Crater is 800 meters (nearly half a mile) in diameter, about six times wider than 'Endurance Crater,' where Opportunity spent several months in 2004 examining rock layers affected by ancient water.

    When scientists using orbital data calculated that they should be able to detect Victoria's rim in rover images, they scrutinized frames taken in the direction of the crater by the panoramic camera. To positively characterize the subtle horizon profile of the crater and some of the features leading up to it, researchers created a vertically-stretched image (top) from a mosaic of regular frames from the panoramic camera (bottom), taken on Opportunity's 804th Martian day (April 29, 2006).

    The stretched image makes mild nearby dunes look like more threatening peaks, but that is only a result of the exaggerated vertical dimension. This vertical stretch technique was first applied to Viking Lander 2 panoramas by Philip Stooke, of the University of Western Ontario, Canada, to help locate the lander with respect to orbiter images. Vertically stretching the image allows features to be more readily identified by the Mars Exploration Rover science team.

    The bright white dot near the horizon to the right of center (barely visible without labeling or zoom-in) is thought to be a light-toned outcrop on the far wall of the crater, suggesting that the rover can see over the low rim of Victoria. In figure 1, the northeast and southeast rims are labeled

  16. Showing What They Know

    ERIC Educational Resources Information Center

    Cech, Scott J.

    2008-01-01

    Having students show their skills in three dimensions, known as performance-based assessment, dates back at least to Socrates. Individual schools such as Barrington High School--located just outside of Providence--have been requiring students to actively demonstrate their knowledge for years. The Rhode Island's high school graduating class became…

  17. The Ozone Show.

    ERIC Educational Resources Information Center

    Mathieu, Aaron

    2000-01-01

    Uses a talk show activity for a final assessment tool for students to debate about the ozone hole. Students are assessed on five areas: (1) cooperative learning; (2) the written component; (3) content; (4) self-evaluation; and (5) peer evaluation. (SAH)

  18. What Do Maps Show?

    ERIC Educational Resources Information Center

    Geological Survey (Dept. of Interior), Reston, VA.

    This curriculum packet, appropriate for grades 4-8, features a teaching poster which shows different types of maps (different views of Salt Lake City, Utah), as well as three reproducible maps and reproducible activity sheets which complement the maps. The poster provides teacher background, including step-by-step lesson plans for four geography…

  19. Show Me the Way

    ERIC Educational Resources Information Center

    Dicks, Matthew J.

    2005-01-01

    Because today's students have grown up steeped in video games and the Internet, most of them expect feedback, and usually gratification, very soon after they expend effort on a task. Teachers can get quick feedback to students by showing them videotapes of their learning performances. The author, a 3rd grade teacher describes how the seemingly…

  20. Chemistry Game Shows

    NASA Astrophysics Data System (ADS)

    Campbell, Susan; Muzyka, Jennifer

    2002-04-01

    We present a technological improvement to the use of game shows to help students review for tests. Our approach uses HTML files interpreted with a browser on a computer attached to an LCD projector. The HTML files can be easily modified for use of the game in a variety of courses.

  1. Honored Teacher Shows Commitment.

    ERIC Educational Resources Information Center

    Ratte, Kathy

    1987-01-01

    Part of the acceptance speech of the 1985 National Council for the Social Studies Teacher of the Year, this article describes the censorship experience of this honored social studies teacher. The incident involved the showing of a videotape version of the feature film entitled "The Seduction of Joe Tynan." (JDH)

  2. Talk Show Science.

    ERIC Educational Resources Information Center

    Moore, Mitzi Ruth

    1992-01-01

    Proposes having students perform skits in which they play the roles of the science concepts they are trying to understand. Provides the dialog for a skit in which hot and cold gas molecules are interviewed on a talk show to study how these properties affect wind, rain, and other weather phenomena. (MDH)

  3. Stage a Water Show

    ERIC Educational Resources Information Center

    Frasier, Debra

    2008-01-01

    In the author's book titled "The Incredible Water Show," the characters from "Miss Alaineus: A Vocabulary Disaster" used an ocean of information to stage an inventive performance about the water cycle. In this article, the author relates how she turned the story into hands-on science teaching for real-life fifth-grade students. The author also…

  4. Not a "reality" show.

    PubMed

    Wrong, Terence; Baumgart, Erica

    2013-01-01

    The authors of the preceding articles raise legitimate questions about patient and staff rights and the unintended consequences of allowing ABC News to film inside teaching hospitals. We explain why we regard their fears as baseless and not supported by what we heard from individuals portrayed in the filming, our decade-long experience making medical documentaries, and the full un-aired context of the scenes shown in the broadcast. The authors don't and can't know what conversations we had, what documents we reviewed, and what protections we put in place in each televised scene. Finally, we hope to correct several misleading examples cited by the authors as well as their offhand mischaracterization of our program as a "reality" show.

  5. Children's school-breakfast reports and school-lunch reports (in 24-h dietary recalls): conventional and reporting-error-sensitive measures show inconsistent accuracy results for retention interval and breakfast location.

    PubMed

    Baxter, Suzanne D; Guinn, Caroline H; Smith, Albert F; Hitchcock, David B; Royer, Julie A; Puryear, Megan P; Collins, Kathleen L; Smith, Alyssa L

    2016-04-14

    Validation-study data were analysed to investigate retention interval (RI) and prompt effects on the accuracy of fourth-grade children's reports of school-breakfast and school-lunch (in 24-h recalls), and the accuracy of school-breakfast reports by breakfast location (classroom; cafeteria). Randomly selected fourth-grade children at ten schools in four districts were observed eating school-provided breakfast and lunch, and were interviewed under one of eight conditions created by crossing two RIs ('short'--prior-24-hour recall obtained in the afternoon and 'long'--previous-day recall obtained in the morning) with four prompts ('forward'--distant to recent, 'meal name'--breakfast, etc., 'open'--no instructions, and 'reverse'--recent to distant). Each condition had sixty children (half were girls). Of 480 children, 355 and 409 reported meals satisfying criteria for reports of school-breakfast and school-lunch, respectively. For breakfast and lunch separately, a conventional measure--report rate--and reporting-error-sensitive measures--correspondence rate and inflation ratio--were calculated for energy per meal-reporting child. Correspondence rate and inflation ratio--but not report rate--showed better accuracy for school-breakfast and school-lunch reports with the short RI than with the long RI; this pattern was not found for some prompts for each sex. Correspondence rate and inflation ratio showed better school-breakfast report accuracy for the classroom than for cafeteria location for each prompt, but report rate showed the opposite. For each RI, correspondence rate and inflation ratio showed better accuracy for lunch than for breakfast, but report rate showed the opposite. When choosing RI and prompts for recalls, researchers and practitioners should select a short RI to maximise accuracy. Recommendations for prompt selections are less clear. As report rates distort validation-study accuracy conclusions, reporting-error-sensitive measures are recommended.

  6. [Shift the skin paddle in an additional incision improves the result: Study of a series of 82 breast reconstructions by latissimus dorsi flap and prosthesis implantation at 10 years].

    PubMed

    Chiriac, S; Dissaux, C; Bruant-Rodier, C; Djerada, Z; Bodin, F; François, C

    2016-11-17

    The position of the skin paddle on the breast area is a fundamental element for the breast reconstructions by latissimus dorsi flap and prosthesis implantation. Should, as Millard advocated, to recreate the initial defect and include it in the mastectomy scar or is it better in an additional incision as have others authors. This study compares the long-term morphological results of these two attitudes, with or without additional incision.

  7. 2-Year follow-up to STeP trial shows sustainability of structured self-monitoring of blood glucose utilization: results from the STeP practice logistics and usability survey (STeP PLUS).

    PubMed

    Friedman, Kevin; Noyes, Jeannette; Parkin, Christopher G

    2013-04-01

    We report findings from a follow-up survey of clinicians from the STeP study that assessed their attitudes toward and current use of the Accu-Chek(®) 360° View tool (Roche Diagnostics, Indianapolis, IN) approximately 2 years after the study was completed. The Accu-Chek 360° View tool enables patients to record/plot a seven-point self-monitoring of blood glucose (SMBG) profile (fasting, preprandial/2-h postprandial at each of the three meals, and bedtime) on 3 consecutive days, document meal sizes and energy levels, and comment on their SMBG experiences. Our findings showed that the majority of these physicians continue to use the tool with their patients, citing enhanced patient understanding and engagement, better discussions with patients regarding the impact of lifestyle behaviors, improved clinical outcomes, and better practice efficiencies as significant benefits of the tool.

  8. In favour of the definition "adolescents with idiopathic scoliosis": juvenile and adolescent idiopathic scoliosis braced after ten years of age, do not show different end results. SOSORT award winner 2014

    PubMed Central

    2014-01-01

    Background The most important factor discriminating juvenile (JIS) from adolescent idiopathic scoliosis (AIS) is the risk of deformity progression. Brace treatment can change natural history, even when risk of progression is high. The aim of this study was to compare the end of growth results of JIS subjects, treated after 10 years of age, with final results of AIS. Methods Design: prospective observational controlled cohort study nested in a prospective database. Setting: outpatient tertiary referral clinic specialized in conservative treatment of spinal deformities. Inclusion criteria: idiopathic scoliosis; European Risser 0–2; 25 degrees to 45 degrees Cobb; start treatment age: 10 years or more, never treated before. Exclusion criteria: secondary scoliosis, neurological etiology, prior treatment for scoliosis (brace or surgery). Groups: 27 patients met the inclusion criteria for the AJIS, (Juvenile Idiopathic Scoliosis treated in adolescence), demonstrated by an x-ray before 10 year of age, and treatment start after 10 years of age. AIS group included 45 adolescents with a diagnostic x-ray made after the threshold of age 10 years. Results at the end of growth were analysed; the threshold of 5 Cobb degree to define worsened, improved and stabilized curves was considered. Statistics: Mean and SD were used for descriptive statistics of clinical and radiographic changes. Relative Risk of failure (RR), Chi-square and T-test of all data was calculated to find differences among the two groups. 95% Confidence Interval (CI) , and of radiographic changes have been calculated. Results We did not find any Cobb angle significant differences among groups at baseline and at the end of treatment. The only difference was in the number of patients progressed above 45 degrees, found in the JIS group. The RR of progression of AJIS was, 1.35 (IC95% 0.57-3.17) versus AIS, and it wasn't statistically significant in the AJIS group, in respect to AIS group (p = 0.5338). Conclusion

  9. Clinical consequences of the Calypso trial showing superiority of PEG-liposomal doxorubicin and carboplatin over paclitaxel and carboplatin in recurrent ovarian cancer: results of an Austrian gynecologic oncologists' expert meeting.

    PubMed

    Petru, Edgar; Reinthaller, Alexander; Angleitner-Boubenizek, Lukas; Schauer, Christian; Zeimet, Alain; Dirschlmayer, Wolfgang; Medl, Michael; Stummvoll, Wolfgang; Sevelda, Paul; Marth, Christian

    2010-11-01

    The Calypso trial showed an improved progression-free survival with PEG-liposomal doxorubicin (PLD) and carboplatin (P) as compared with the standard regimen paclitaxel (PCLTX) and P in the second- or third-line treatment of platinum-sensitive epithelial ovarian cancer [1]. A panel of Austrian gynecologic oncologists discussed the clinical consequences of the data from the Calypso study for the routine practice. PLD + P had a significantly lower rate of alopecia and neuropathy than the taxane regimen, both toxicities which compromise the quality of life. Due to possible significant thrombocytopenia, the blood counts of patients undergoing PLD + P therapy should be monitored weekly. Patients receiving PLD/P are at higher risk of nausea and vomiting. Palmoplantar erythrodysesthesia (hand-foot syndrome) is a significant toxicity of PLD + P most prevalent after the third or fourth cycle. Prophylaxis consists of avoiding pressure on feet and hands and other parts of the body. Similarly, prophylaxis of mucositis seems important and includes avoiding consumption of hot, spicy and salty foods and drinks. Mouth dryness should be avoided. Premedication with antiemetics and dexamethasone dissolved in 5% glucose is done to prevent hypersensitivity to PLD. In conclusion, the therapeutic index is more favorable for PLD + P than for PCTX + P.

  10. Numerical and analytic results showing the suppression of secondary electron emission from velvet and foam, and a geometric view factor model to guide the development of a surface to suppress SEE

    NASA Astrophysics Data System (ADS)

    Swanson, Charles; Kaganovich, I. D.

    2016-09-01

    The technique of suppressing secondary electron emission (SEE) from a surface by texturing it is developing rapidly in recent years. We have specific and general results in support of this technique: We have performed numerical and analytic calculations for determining the effective secondary electron yield (SEY) from velvet, which is an array of long cylinders on the micro-scale, and found velvet to be suitable for suppressing SEY from a normally incident primary distribution. We have performed numerical and analytic calculations also for metallic foams, which are an isotropic lattice of fibers on the micro-scale, and found foams to be suitable for suppressing SEY from an isotropic primary distribution. More generally, we have created a geometric weighted view factor model for determining the SEY suppression of a given surface geometry, which has optimization of SEY as a natural application. The optimal surface for suppressing SEY does not have finite area and has no smallest feature size, making it fractal in nature. This model gives simple criteria for a physical, non-fractal surface to suppress SEY. We found families of optimal surfaces to suppress SEY given a finite surface area. The research is supported by Air Force Office of Scientific Research (AFSOR).

  11. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  12. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  13. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  14. Results from expert tests of the TP-100A boiler at the Lugansk thermal power station during the combustion of lean coal and anthracite culm with addition of RA-GEN-F anaklarid

    NASA Astrophysics Data System (ADS)

    Mikhailov, V. E.; Tupitsyn, S. P.; Sokolov, V. V.; Chebakova, G. F.; Malygin, V. I.; Yazykov, Yu. V.; Kharchenko, A. V.; Chetverikov, A. N.

    2012-08-01

    Results from expert tests of separated combustion of Grade T and Grade ASh anthracite culm in the TP-100A boiler No. 15 at the Lugansk thermal power station carried out with and without addition of RA-GEN-F anaklarid are presented. The possibility of extending the boiler load adjustment range and excluding the use of natural gas for supporting the flame at minimal loads is considered.

  15. Overview of differences between microbial feed additives and probiotics for food regarding regulation, growth promotion effects and health properties and consequences for extrapolation of farm animal results to humans.

    PubMed

    Bernardeau, M; Vernoux, J-P

    2013-04-01

    For many years, microbial adjuncts have been used to supplement the diets of farm animals and humans. They have evolved since the 1990s to become known as probiotics, i.e. functional food with health benefits. After the discovery of a possible link between manipulation of gut microflora in mice and obesity, a focus on the use of these beneficial microbes that act on gut microflora in animal farming was undertaken and compared with the use of probiotics for food. Beneficial microbes added to feed are classified at a regulatory level as zootechnical additives, in the category of gut flora stabilizers for healthy animals and are regulated up to strain level in Europe. Intended effects are improvement of performance characteristics, which are strain dependent and growth enhancement is not a prerequisite. In fact, increase of body weight is not commonly reported and its frequency is around 25% of the published data examined here. However, when a Body Weight Gain (BWG) was found in the literature, it was generally moderate (lower than or close to 10%) and this over a reduced period of their short industrial life. When it was higher than 10%, it could be explained as an indirect consequence of the alleviation of the weight losses linked to stressful intensive rearing conditions or health deficiency. However, regulations on feed do not consider the health effects because animals are supposed to be healthy, so there is no requirement for reporting healthy effects in the standard European dossier. The regulations governing the addition of beneficial microorganisms to food are less stringent than for feed and no dossier is required if a species has a Qualified Presumption of Safety status. The microbial strain marketed is not submitted to any regulation and its properties (including BWG) do not need to be studied. Only claims for functional or healthy properties are regulated and again growth effect is not included. However, recent studies on probiotic effects showed that BWG

  16. Addition of docetaxel, zoledronic acid, or both to first-line long-term hormone therapy in prostate cancer (STAMPEDE): survival results from an adaptive, multiarm, multistage, platform randomised controlled trial

    PubMed Central

    James, Nicholas D; Sydes, Matthew R; Clarke, Noel W; Mason, Malcolm D; Dearnaley, David P; Spears, Melissa R; Ritchie, Alastair W S; Parker, Christopher C; Russell, J Martin; Attard, Gerhardt; de Bono, Johann; Cross, William; Jones, Rob J; Thalmann, George; Amos, Claire; Matheson, David; Millman, Robin; Alzouebi, Mymoona; Beesley, Sharon; Birtle, Alison J; Brock, Susannah; Cathomas, Richard; Chakraborti, Prabir; Chowdhury, Simon; Cook, Audrey; Elliott, Tony; Gale, Joanna; Gibbs, Stephanie; Graham, John D; Hetherington, John; Hughes, Robert; Laing, Robert; McKinna, Fiona; McLaren, Duncan B; O'Sullivan, Joe M; Parikh, Omi; Peedell, Clive; Protheroe, Andrew; Robinson, Angus J; Srihari, Narayanan; Srinivasan, Rajaguru; Staffurth, John; Sundar, Santhanam; Tolan, Shaun; Tsang, David; Wagstaff, John; Parmar, Mahesh K B

    2016-01-01

    Summary Background Long-term hormone therapy has been the standard of care for advanced prostate cancer since the 1940s. STAMPEDE is a randomised controlled trial using a multiarm, multistage platform design. It recruits men with high-risk, locally advanced, metastatic or recurrent prostate cancer who are starting first-line long-term hormone therapy. We report primary survival results for three research comparisons testing the addition of zoledronic acid, docetaxel, or their combination to standard of care versus standard of care alone. Methods Standard of care was hormone therapy for at least 2 years; radiotherapy was encouraged for men with N0M0 disease to November, 2011, then mandated; radiotherapy was optional for men with node-positive non-metastatic (N+M0) disease. Stratified randomisation (via minimisation) allocated men 2:1:1:1 to standard of care only (SOC-only; control), standard of care plus zoledronic acid (SOC + ZA), standard of care plus docetaxel (SOC + Doc), or standard of care with both zoledronic acid and docetaxel (SOC + ZA + Doc). Zoledronic acid (4 mg) was given for six 3-weekly cycles, then 4-weekly until 2 years, and docetaxel (75 mg/m2) for six 3-weekly cycles with prednisolone 10 mg daily. There was no blinding to treatment allocation. The primary outcome measure was overall survival. Pairwise comparisons of research versus control had 90% power at 2·5% one-sided α for hazard ratio (HR) 0·75, requiring roughly 400 control arm deaths. Statistical analyses were undertaken with standard log-rank-type methods for time-to-event data, with hazard ratios (HRs) and 95% CIs derived from adjusted Cox models. This trial is registered at ClinicalTrials.gov (NCT00268476) and ControlledTrials.com (ISRCTN78818544). Findings 2962 men were randomly assigned to four groups between Oct 5, 2005, and March 31, 2013. Median age was 65 years (IQR 60–71). 1817 (61%) men had M+ disease, 448 (15%) had N+/X M0, and 697 (24%) had N0M0. 165 (6

  17. [Autoimmune processes after long-term low-level exposure to electromagnetic fields (the results of an experiment). Part 1. Mobile communications and changes in electromagnetic conditions for the population. Needs for additional substantiation of the existing hygienic standards].

    PubMed

    Grigor'ev, Iu G; Grigor'ev, O A; Ivanov, A A; Liaginskaia, A M; Merkulov, A V; Stepanov, V S; Shagina, N B

    2010-01-01

    Mobile communications provides a new source of electromagnetic exposure for almost the whole population of the Russian Federation. For the first time in the history of civilization the brain of mobile phone users was exposed to localized radiofrequency (RF) electromagnetic fields (EMF). Population exposure from the base stations is also considered to be specific. However, existing standards for limiting the exposure do not account for this special EMF source and may not ensure the absence of health effects. There was a need for reliable information that would extend databases used for development of new standards. As recommended by the World Health Organization an additional experiment was performed under the supervision of foreign experts, which showed changes in autoimmune status in rats after long-term low-level RF EMF exposure with an incident power density of 500 microW/cm2.

  18. Dimensional changes in stone models simulating full crown preparations with adjacent teeth resulting from long-term immersion of medium-viscosity addition-type silicone rubber impressions in disinfectant solutions.

    PubMed

    Hiraguchi, Hisako; Iwasaki, Yukiko; Iwasaki, Eriko; Kikuchi, Hisaji; Hirose, Hideharu; Yoneyama, Takayuki

    2015-01-01

    If impression materials could be immersed in disinfectant solutions for a longer period, then this form of disinfection would be easier to incorporate into dental preparation procedures. This study investigated the dimensional changes in stone models resulting from immersion of medium-viscosity hydrophilic addition-type silicone rubber impression material in disinfectant solutions for 30 min and 24 h. Impressions of a master die designed to simulate a full crown preparation with adjacent teeth were immersed in 2% glutaraldehyde and 0.55% ortho-phthalaldehyde solutions. The dimensional changes in the mesiodistal and buccolingual dimensions in the stone models were then measured using a three-dimensional coordinate system. It was found that the dimensional changes in the stone models caused by immersion of the impression materials were less than 15 μm. Immersion in 2% glutaraldehyde or 0.55% ortho-phthalaldehyde for 24 h was as clinically acceptable for medium-viscosity hydrophilic addition-type silicone rubber impressions as immersion for 30 min.

  19. Clinical Impact of Additional Cytogenetic Aberrations, cKIT and RAS Mutations, and Treatment Elements in Pediatric t(8;21)-AML: Results From an International Retrospective Study by the International Berlin-Frankfurt-Münster Study Group

    PubMed Central

    Klein, Kim; Kaspers, Gertjan; Harrison, Christine J.; Beverloo, H. Berna; Reedijk, Ardine; Bongers, Mathilda; Cloos, Jacqueline; Pession, Andrea; Reinhardt, Dirk; Zimmerman, Martin; Creutzig, Ursula; Dworzak, Michael; Alonzo, Todd; Johnston, Donna; Hirsch, Betsy; Zapotocky, Michal; De Moerloose, Barbara; Fynn, Alcira; Lee, Vincent; Taga, Takashi; Tawa, Akio; Auvrignon, Anne; Zeller, Bernward; Forestier, Erik; Salgado, Carmen; Balwierz, Walentyna; Popa, Alexander; Rubnitz, Jeffrey; Raimondi, Susana; Gibson, Brenda

    2015-01-01

    Purpose This retrospective cohort study aimed to determine the predictive relevance of clinical characteristics, additional cytogenetic aberrations, and cKIT and RAS mutations, as well as to evaluate whether specific treatment elements were associated with outcomes in pediatric t(8;21)-positive patients with acute myeloid leukemia (AML). Patients and Methods Karyotypes of 916 pediatric patients with t(8;21)-AML were reviewed for the presence of additional cytogenetic aberrations, and 228 samples were screened for presence of cKIT and RAS mutations. Multivariable regression models were used to assess the relevance of anthracyclines, cytarabine, and etoposide during induction and overall treatment. End points were the probability of achieving complete remission, cumulative incidence of relapse (CIR), probability of event-free survival, and probability of overall survival. Results Of 838 patients included in final analyses, 92% achieved complete remission. The 5-year overall survival, event-free survival, and CIR were 74%, 58%, and 26%, respectively. cKIT mutations and RAS mutations were not significantly associated with outcome. Patients with deletions of chromosome arm 9q [del(9q); n = 104] had a lower probability of complete remission (P = .01). Gain of chromosome 4 (+4; n = 21) was associated with inferior CIR and survival (P < .01). Anthracycline doses greater than 150 mg/m2 and etoposide doses greater than 500 mg/m2 in the first induction course and high-dose cytarabine 3 g/m2 during induction were associated with better outcomes on various end points. Cumulative doses of cytarabine greater than 30 g/m2 and etoposide greater than 1,500 mg/m2 were associated with lower CIR rates and better probability of event-free survival. Conclusion Pediatric patients with t(8;21)-AML and additional del(9q) or additional +4 might not be considered at good risk. Patients with t(8;21)-AML likely benefit from protocols that have high doses of anthracyclines, etoposide, and

  20. Nitrogen as a friendly addition to steel

    SciTech Connect

    Rawers, J.C.

    2006-01-01

    Interstitial alloying with nitrogen or carbon is a common means of enhancing properties of iron-based alloys. Interstitial nitrogen addition to fcc-phase Fe-Cr-Mn/Ni alloys results in improved mechanical properties, whereas addition of carbon can result in the formation of unwanted carbides. Carbon addition to low alloy, bcc-phase iron alloys significantly improves strength through the formation of carbides, whereas addition of nitrogen in bcc-phase iron alloys can result in porous casting and reduced mechanical properties. This study will show that alloying iron-based alloys with both nitrogen and carbon can produce positive results. Nitrogen addition to Fe-C and Fe-Cr-C alloys, and both nitrogen and nitrogen-carbon additions to Fe-Cr-Mn/Ni alloys altered the microstructure, improved mechanical properties, increased hardness, and reduced wear by stabilizing the fcc-phase and altering (possibly eliminating) precipitate formation.

  1. Additive manufacturing of hybrid circuits

    SciTech Connect

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  2. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  3. 15. Detail showing lower chord pinconnected to vertical member, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Detail showing lower chord pin-connected to vertical member, showing floor beam riveted to extension of vertical member below pin-connection, and showing brackets supporting cantilevered sidewalk. View to southwest. - Selby Avenue Bridge, Spanning Short Line Railways track at Selby Avenue between Hamline & Snelling Avenues, Saint Paul, Ramsey County, MN

  4. Health effects models for nuclear power plant accident consequence analysis. Modification of models resulting from addition of effects of exposure to alpha-emitting radionuclides: Revision 1, Part 2, Scientific bases for health effects models, Addendum 2

    SciTech Connect

    Abrahamson, S.; Bender, M.A.; Boecker, B.B.; Scott, B.R.; Gilbert, E.S.

    1993-05-01

    The Nuclear Regulatory Commission (NRC) has sponsored several studies to identify and quantify, through the use of models, the potential health effects of accidental releases of radionuclides from nuclear power plants. The Reactor Safety Study provided the basis for most of the earlier estimates related to these health effects. Subsequent efforts by NRC-supported groups resulted in improved health effects models that were published in the report entitled {open_quotes}Health Effects Models for Nuclear Power Plant Consequence Analysis{close_quotes}, NUREG/CR-4214, 1985 and revised further in the 1989 report NUREG/CR-4214, Rev. 1, Part 2. The health effects models presented in the 1989 NUREG/CR-4214 report were developed for exposure to low-linear energy transfer (LET) (beta and gamma) radiation based on the best scientific information available at that time. Since the 1989 report was published, two addenda to that report have been prepared to (1) incorporate other scientific information related to low-LET health effects models and (2) extend the models to consider the possible health consequences of the addition of alpha-emitting radionuclides to the exposure source term. The first addendum report, entitled {open_quotes}Health Effects Models for Nuclear Power Plant Accident Consequence Analysis, Modifications of Models Resulting from Recent Reports on Health Effects of Ionizing Radiation, Low LET Radiation, Part 2: Scientific Bases for Health Effects Models,{close_quotes} was published in 1991 as NUREG/CR-4214, Rev. 1, Part 2, Addendum 1. This second addendum addresses the possibility that some fraction of the accident source term from an operating nuclear power plant comprises alpha-emitting radionuclides. Consideration of chronic high-LET exposure from alpha radiation as well as acute and chronic exposure to low-LET beta and gamma radiations is a reasonable extension of the health effects model.

  5. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  6. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  7. Hey Teacher, Your Personality's Showing!

    ERIC Educational Resources Information Center

    Paulsen, James R.

    1977-01-01

    A study of 30 fourth, fifth, and sixth grade teachers and 300 of their students showed that a teacher's age, sex, and years of experience did not relate to students' mathematics achievement, but that more effective teachers showed greater "freedom from defensive behavior" than did less effective teachers. (DT)

  8. Addition of Nitazoxanide to PEG-IFN and Ribavirin to Improve HCV Treatment Response in HIV-1 and HCV Genotype 1 Coinfected Persons Naïve to HCV Therapy: Results of the ACTG A5269 Trial

    PubMed Central

    Amorosa, Valerianna K.; Luetkemeyer, Anne; Kang, Minhee; Johnson, Victoria A.; Umbleja, Triin; Haas, David W.; Yesmin, Suria; Bardin, Matthew C.; Chung, Ray T.; Alston-Smith, Beverly; Tebas, Pablo; Peters, Marion G.

    2014-01-01

    Background We hypothesized that nitazoxanide (NTZ) added to pegylated inter-feron alfa-2a (PEG-IFN) and weight-based ribavirin (WBR) would improve hepatitis C virus (HCV) virologic responses in HCV treatment-naïve HIV-1/HCV genotype 1 coin-fected persons. Methods Prospective, single-arm study in which subjects received 4-week lead-in (NTZ 500 mg twice daily) followed by 48 weeks of NTZ, PEG-IFN, and WBR. We compared the HCV virologic responses of these subjects to his­torical controls from the completed ACTG study A5178 who received PEG-IFN and WBR and had similar subject characteristics. Primary endpoints were early virologic response and complete early virologic response (EVR and cEVR). Results Among 67 subjects (78% male; 48% Black; median age, 50 years), EVR was achieved in 65.7% (90% CI, 55.0%–75.3%), cEVR in 38.8% (28.8%–49.6%). and SVR in 32.8% (23.4%–43.5%). EVR was higher with NTZ (51.4% in A5178; P = .03), but the sustained virologic response (SVR) proportion was similar (27.3% in A5178; P = .24). In contrast to A5178, SVR was similar across IL28B genotypes. Overall, NTZ was safe and well-tolerated. Conclusion Whereas EVR proportion improved significantly in this pilot study, the addition of NTZ to PEG-IFN/WBR did not significantly improve SVR compared to historical controls. NTZ may be associated with an attenuation of the effect of IL28B on HCV treatment response. PMID:24334180

  9. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  10. Satellite Animation Shows California Storms

    NASA Video Gallery

    This animation of visible and infrared imagery from NOAA's GOES-West satellite shows a series of moisture-laden storms affecting California from Jan. 6 through Jan. 9, 2017. TRT: 00:36 Credit: NASA...

  11. Satellite Movie Shows Erika Dissipate

    NASA Video Gallery

    This animation of visible and infrared imagery from NOAA's GOES-West satellite from Aug. 27 to 29 shows Tropical Storm Erika move through the Eastern Caribbean Sea and dissipate near eastern Cuba. ...

  12. Chemical genetics suggests a critical role for lysyl oxidase in zebrafish notochord morphogenesis† †Electronic supplementary information (ESI) available: Figure showing the of effect of 5 and 6 on the notochord and experimental details for compounds 2–6. See DOI: 10.1039/b613673g Click here for additional data file.

    PubMed Central

    Anderson, Carrie; Bartlett, Stephen J.; Gansner, John M.; Wilson, Duncan; He, Ling; Gitlin, Jonathan D.

    2007-01-01

    As a result of a chemical genetic screen for modulators of metalloprotease activity, we report that 2-mercaptopyridine-N-oxide induces a conspicuous undulating notochord defect in zebrafish embryos, a phenocopy of the leviathan mutant. The location of the chemically-induced wavy notochord correlated with the timing of application, thus defining a narrow chemical sensitivity window during segmentation stages. Microscopic observations revealed that notochord undulations appeared during the phase of notochord cell vacuolation and notochord elongation. Notochord cells become swollen as well as disorganized, while electron microscopy revealed disrupted organization of collagen fibrils in the surrounding sheath. We demonstrate by assay in zebrafish extracts that 2-mercaptopyridine-N-oxide inhibits lysyl oxidase. Thus, we provide insight into notochord morphogenesis and reveal novel compounds for lysyl oxidase inhibition. Taken together, these data underline the utility of small molecules for elucidating the dynamic mechanisms of early morphogenesis and provide a potential explanation for the recently established role of copper in zebrafish notochord formation. PMID:17216056

  13. Phyllodes tumor showing intraductal growth.

    PubMed

    Makidono, Akari; Tsunoda, Hiroko; Mori, Miki; Yagata, Hiroshi; Onoda, Yui; Kikuchi, Mari; Nozaki, Taiki; Saida, Yukihisa; Nakamura, Seigo; Suzuki, Koyu

    2013-07-01

    Phyllodes tumor of the breast is a rare fibroepithelial lesion and particularly uncommon in adolescent girls. It is thought to arise from the periductal rather than intralobular stroma. Usually, it is seen as a well-defined mass. Phyllodes tumor showing intraductal growth is extremely rare. Here we report a girl who has a phyllodes tumor with intraductal growth.

  14. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  15. Magic Carpet Shows Its Colors

    NASA Technical Reports Server (NTRS)

    2004-01-01

    The upper left image in this display is from the panoramic camera on the Mars Exploration Rover Spirit, showing the 'Magic Carpet' region near the rover at Gusev Crater, Mars, on Sol 7, the seventh martian day of its journey (Jan. 10, 2004). The lower image, also from the panoramic camera, is a monochrome (single filter) image of a rock in the 'Magic Carpet' area. Note that colored portions of the rock correlate with extracted spectra shown in the plot to the side. Four different types of materials are shown: the rock itself, the soil in front of the rock, some brighter soil on top of the rock, and some dust that has collected in small recesses on the rock face ('spots'). Each color on the spectra matches a line on the graph, showing how the panoramic camera's different colored filters are used to broadly assess the varying mineral compositions of martian rocks and soils.

  16. Graphene Oxides Show Angiogenic Properties.

    PubMed

    Mukherjee, Sudip; Sriram, Pavithra; Barui, Ayan Kumar; Nethi, Susheel Kumar; Veeriah, Vimal; Chatterjee, Suvro; Suresh, Kattimuttathu Ittara; Patra, Chitta Ranjan

    2015-08-05

    Angiogenesis, a process resulting in the formation of new capillaries from the pre-existing vasculature plays vital role for the development of therapeutic approaches for cancer, atherosclerosis, wound healing, and cardiovascular diseases. In this report, the synthesis, characterization, and angiogenic properties of graphene oxide (GO) and reduced graphene oxide (rGO) have been demonstrated, observed through several in vitro and in vivo angiogenesis assays. The results here demonstrate that the intracellular formation of reactive oxygen species and reactive nitrogen species as well as activation of phospho-eNOS and phospho-Akt might be the plausible mechanisms for GO and rGO induced angiogenesis. The results altogether suggest the possibilities for the development of alternative angiogenic therapeutic approach for the treatment of cardiovascular related diseases where angiogenesis plays a significant role.

  17. "Medicine show." Alice in Doctorland.

    PubMed

    1987-01-01

    This is an excerpt from the script of a 1939 play provided to the Institute of Social Medicine and Community Health by the Library of Congress Federal Theater Project Collection at George Mason University Library, Fairfax, Virginia, pages 2-1-8 thru 2-1-14. The Federal Theatre Project (FTP) was part of the New Deal program for the arts 1935-1939. Funded by the Works Progress Administration (WPA) its goal was to employ theater professionals from the relief rolls. A number of FTP plays deal with aspects of medicine and public health. Pageants, puppet shows and documentary plays celebrated progress in medical science while examining social controversies in medical services and the public health movement. "Medicine Show" sharply contrasts technological wonders with social backwardness. The play was rehearsed by the FTP but never opened because funding ended. A revised version ran on Broadway in 1940. The preceding comments are adapted from an excellent, well-illustrated review of five of these plays by Barabara Melosh: "The New Deal's Federal Theatre Project," Medical Heritage, Vol. 2, No. 1 (Jan/Feb 1986), pp. 36-47.

  18. What Do Blood Tests Show?

    MedlinePlus

    ... Range Results* Red blood cell (varies with altitude) Male: 5 to 6 million cells/mcL Female: 4 to 5 million cells/mcL ... cells/mcL Platelets 140,000 to 450,000 cells/mcL Hemoglobin (varies with altitude) Male: 14 to 17 gm/dL Female: 12 to ...

  19. Ancient bacteria show evidence of DNA repair

    PubMed Central

    Johnson, Sarah Stewart; Hebsgaard, Martin B.; Christensen, Torben R.; Mastepanov, Mikhail; Nielsen, Rasmus; Munch, Kasper; Brand, Tina; Gilbert, M. Thomas P.; Zuber, Maria T.; Bunce, Michael; Rønn, Regin; Gilichinsky, David; Froese, Duane; Willerslev, Eske

    2007-01-01

    Recent claims of cultivable ancient bacteria within sealed environments highlight our limited understanding of the mechanisms behind long-term cell survival. It remains unclear how dormancy, a favored explanation for extended cellular persistence, can cope with spontaneous genomic decay over geological timescales. There has been no direct evidence in ancient microbes for the most likely mechanism, active DNA repair, or for the metabolic activity necessary to sustain it. In this paper, we couple PCR and enzymatic treatment of DNA with direct respiration measurements to investigate long-term survival of bacteria sealed in frozen conditions for up to one million years. Our results show evidence of bacterial survival in samples up to half a million years in age, making this the oldest independently authenticated DNA to date obtained from viable cells. Additionally, we find strong evidence that this long-term survival is closely tied to cellular metabolic activity and DNA repair that over time proves to be superior to dormancy as a mechanism in sustaining bacteria viability. PMID:17728401

  20. "Show me" bioethics and politics.

    PubMed

    Christopher, Myra J

    2007-10-01

    Missouri, the "Show Me State," has become the epicenter of several important national public policy debates, including abortion rights, the right to choose and refuse medical treatment, and, most recently, early stem cell research. In this environment, the Center for Practical Bioethics (formerly, Midwest Bioethics Center) emerged and grew. The Center's role in these "cultural wars" is not to advocate for a particular position but to provide well researched and objective information, perspective, and advocacy for the ethical justification of policy positions; and to serve as a neutral convener and provider of a public forum for discussion. In this article, the Center's work on early stem cell research is a case study through which to argue that not only the Center, but also the field of bioethics has a critical role in the politics of public health policy.

  1. Phoenix Scoop Inverted Showing Rasp

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This image taken by the Surface Stereo Imager on Sol 49, or the 49th Martian day of the mission (July 14, 2008), shows the silver colored rasp protruding from NASA's Phoenix Mars Lander's Robotic Arm scoop. The scoop is inverted and the rasp is pointing up.

    Shown with its forks pointing toward the ground is the thermal and electrical conductivity probe, at the lower right. The Robotic Arm Camera is pointed toward the ground.

    The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is led by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  2. ShowMe3D

    SciTech Connect

    Sinclair, Michael B

    2012-01-05

    ShowMe3D is a data visualization graphical user interface specifically designed for use with hyperspectral image obtained from the Hyperspectral Confocal Microscope. The program allows the user to select and display any single image from a three dimensional hyperspectral image stack. By moving a slider control, the user can easily move between images of the stack. The user can zoom into any region of the image. The user can select any pixel or region from the displayed image and display the fluorescence spectrum associated with that pixel or region. The user can define up to 3 spectral filters to apply to the hyperspectral image and view the image as it would appear from a filter-based confocal microscope. The user can also obtain statistics such as intensity average and variance from selected regions.

  3. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; ...

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  4. Platelet additive solution - electrolytes.

    PubMed

    Azuma, Hiroshi; Hirayama, Junichi; Akino, Mitsuaki; Ikeda, Hisami

    2011-06-01

    Recent attention to solutions that replace most or all plasma in platelet concentrates, while maintaining satisfactory platelet function, is motivated by the potential of plasma reduction or depletion to mitigate various transfusion-related adverse events. This report considers the electrolytic composition of previously described platelet additive solutions, in order to draw general conclusions about what is required for platelet function and longevity. The optimal concentrations of Na(+) and Cl(-) are 69-115 mM. The presence of both K(+) and Mg(2+) in platelet suspension at nearly physiological concentrations (3-5mM and 1.5-3mM, respectively) is indispensable for good preservation capacity because both electrolytes are required to prevent platelet activation. In contrast to K(+) and Mg(2+), Ca(2+) may not be important because no free Ca(2+) is available in M-sol, which showed excellent platelet preservation capacity at less than 5% plasma concentration. The importance of bicarbonate (approximately 40 mM) can be recognized when the platelets are suspended in additive solution under less than 5% residual plasma concentration.

  5. Addition of cladribine to the standard induction treatment improves outcomes in a subset of elderly acute myeloid leukemia patients. Results of a randomized Polish Adult Leukemia Group (PALG) phase II trial.

    PubMed

    Pluta, Agnieszka; Robak, Tadeusz; Wrzesien-Kus, Agata; Katarzyna Budziszewska, Bozena; Sulek, Kazimierz; Wawrzyniak, Ewa; Czemerska, Magdalena; Zwolinska, Malgorzata; Golos, Aleksandra; Holowiecka-Goral, Aleksandra; Kyrcz-Krzemien, Slawomira; Piszcz, Jaroslaw; Kloczko, Janusz; Mordak-Domagala, Monika; Lange, Andrzej; Razny, Małgorzata; Madry, Krzysztof; Wiktor-Jedrzejczak, Wieslaw; Grosicki, Sebastian; Butrym, Aleksandra; Kuliczkowski, Kazimierz; Warzocha, Krzysztof; Holowiecki, Jerzy; Giebel, Sebastian; Szydlo, Richard; Wierzbowska, Agnieszka

    2017-04-01

    Intensive induction chemotherapy using anthracycline and cytarabine backbone is considered the most effective upfront therapy in physically fit older patients with acute myeloid leukemia (AML). However, outcomes of the standard induction in elderly AML are inferior to those observed in younger patients, and they are still unsatisfactory. As addition of cladribine to the standard induction therapy is known to improve outcome in younger AML patients. The present randomized phase II study compares efficacy and toxicity of the DAC (daunorubicin plus cytarabine plus cladribine) regimen with the standard DA (daunorubicin plus cytarabine) regimen in the newly diagnosed AML patients over 60 years of age. A total of 171 patients were enrolled in the study (DA, 86; DAC, 85). A trend toward higher complete remission (CR) was observed in the DAC arm compared to the DA arm (44% vs. 34%; P = .19), which did not lead to improved median overall survival, which in the case of the DAC group was 8.6 months compared to in 9.1 months in the DA group (P = .64). However, DAC appeared to be superior in the group of patients aged 60-65 (CR rate: DAC 51% vs. DA 29%; P = .02). What is more, a subgroup of patients, with good and intermediate karyotypes, benefited from addition of cladribine also in terms of overall survival (P = .02). No differences in hematological and nonhematological toxicity between the DA and DAC regimens were observed.

  6. Fludarabine and cytosine are less effective than standard ADE chemotherapy in high-risk acute myeloid leukemia, and addition of G-CSF and ATRA are not beneficial: results of the MRC AML-HR randomized trial.

    PubMed

    Milligan, Donald W; Wheatley, Keith; Littlewood, Timothy; Craig, Jenny I O; Burnett, Alan K

    2006-06-15

    The optimum chemotherapy schedule for reinduction of patients with high-risk acute myeloid leukemia (relapsed, resistant/refractory, or adverse genetic disease) is uncertain. The MRC AML (Medical Research Council Acute Myeloid Leukemia) Working Group designed a trial comparing fludarabine and high-dose cytosine (FLA) with standard chemotherapy comprising cytosine arabinoside, daunorubicin, and etoposide (ADE). Patients were also randomly assigned to receive filgrastim (G-CSF) from day 0 until neutrophil count was greater than 0.5 x 10(9)/L (or for a maximum of 28 days) and all-trans retinoic acid (ATRA) for 90 days. Between 1998 and 2003, 405 patients were entered: 250 were randomly assigned between FLA and ADE; 356 to G-CSF versus no G-CSF; 362 to ATRA versus no ATRA. The complete remission rate was 61% with 4-year disease-free survival of 29%. There were no significant differences in the CR rate, deaths in CR, relapse rate, or DFS between ADE and FLA, although survival at 4 years was worse with FLA (16% versus 27%, P = .05). Neither the addition of ATRA nor G-CSF demonstrated any differences in the CR rate, relapse rate, DFS, or overall survival between the groups. In conclusion these findings indicate that FLA may be inferior to standard chemotherapy in high-risk AML and that the outcome is not improved with the addition of either G-CSF or ATRA.

  7. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  8. Casimir experiments showing saturation effects

    SciTech Connect

    Sernelius, Bo E.

    2009-10-15

    We address several different Casimir experiments where theory and experiment disagree. First out is the classical Casimir force measurement between two metal half spaces; here both in the form of the torsion pendulum experiment by Lamoreaux and in the form of the Casimir pressure measurement between a gold sphere and a gold plate as performed by Decca et al.; theory predicts a large negative thermal correction, absent in the high precision experiments. The third experiment is the measurement of the Casimir force between a metal plate and a laser irradiated semiconductor membrane as performed by Chen et al.; the change in force with laser intensity is larger than predicted by theory. The fourth experiment is the measurement of the Casimir force between an atom and a wall in the form of the measurement by Obrecht et al. of the change in oscillation frequency of a {sup 87}Rb Bose-Einstein condensate trapped to a fused silica wall; the change is smaller than predicted by theory. We show that saturation effects can explain the discrepancies between theory and experiment observed in all these cases.

  9. Combination therapy with ONO-KK1-300-01, a cathepsin K inhibitor, and parathyroid hormone results in additive beneficial effect on bone mineral density in ovariectomized rats.

    PubMed

    Ochi, Yasuo; Yamada, Hiroyuki; Mori, Hiroshi; Kawada, Naoki; Tanaka, Makoto; Imagawa, Akira; Ohmoto, Kazuyuki; Kawabata, Kazuhito

    2016-01-01

    This study examined the effects of a novel cathepsin K inhibitor, ONO-KK1-300-01 (KK1-300), used concurrently with parathyroid hormone (PTH) in ovariectomized (OVX) rats. KK1-300 (3 mg/kg, twice daily), alendronate (1 mg/kg, once daily) or vehicle were orally administered to OVX rats for 56 days, starting the day after ovariectomy, followed by combination treatment with or without PTH (3 μg/kg, subcutaneously three times a week) for another 28 days. OVX control animals exhibited a significant increase in both bone resorption (urinary deoxypyridinoline; DPD) and formation markers (serum osteocalcin) as well as microstructural changes associated with decreased bone mineral density (BMD). Combination treatment with KK1-300 and PTH significantly decreased urinary DPD and increased serum osteocalcin, indicating a sustained beneficial effect compared to the effect of each mono-therapy. On the other hand, combination therapy with alendronate and PTH weakened the PTH-induced increase in osteocalcin. In proximal tibia, combination treatment with KK1-300 and PTH increased BMD to a level significantly higher than that achieved following single treatment with KK1-300 or PTH alone. On the other hand, combination treatment with alendronate and PTH failed to produce any significant additive effect on BMD following single treatment with alendronate or PTH alone. Microstructural analysis revealed that the PTH-induced increase in bone formation (MS/BS and BFR/BS) was fully maintained following combination treatment with KK1-300 and PTH, but not following combination treatment with alendronate and PTH. These findings indicate that KK1-300, unlike alendronate, has an additive effect on the preventive action of PTH on bone loss in OVX rats.

  10. Intensification of Antiretroviral Therapy through Addition of Enfuvirtide in Naive HIV-1-Infected Patients with Severe Immunosuppression Does Not Improve Immunological Response: Results of a Randomized Multicenter Trial (ANRS 130 Apollo)

    PubMed Central

    Fagard, Catherine; Grondin, Carine; Descamps, Diane; Yazdanpanah, Yazdan; Charpentier, Charlotte; Colin de Verdiere, Nathalie; Tabuteau, Sophie; Raffi, François; Cabie, André; Chene, Geneviève; Yeni, Patrick

    2013-01-01

    We studied whether addition of enfuvirtide (ENF) to a background combination antiretroviral therapy (cART) would improve the CD4 cell count response at week 24 in naive patients with advanced HIV disease. ANRS 130 Apollo is a randomized study, conducted in naive HIV-1-infected patients, either asymptomatic with CD4 counts of <100/mm3 or stage B/C disease with CD4 counts of <200/mm3. Patients received tenofovir-emtricitabine with lopinavir-ritonavir (LPV/r) or efavirenz and were randomized to receive ENF for 24 weeks (ENF arm) or not (control arm). The primary endpoint was the proportion of patients with CD4 counts of ≥200/mm3 at week 24. A total of 195 patients were randomized: 73% had stage C disease, 78% were male, the mean age was 44 years, the median CD4 count was 30/mm3, and the median HIV-1 RNA load was 5.4 log10 copies/ml. Eighty-one percent of patients received LPV/r. One patient was lost to follow-up, and eight discontinued the study (four in each arm). The proportions of patients with CD4 counts of ≥200/mm3 at week 24 were 34% and 38% in the ENF and control arms, respectively (P = 0.53). The proportions of patients with HIV-1 RNA loads of <50 copies/ml were 74% and 58% at week 24 in the ENF and control arms, respectively (P < 0.02), and the proportion reached 79% in both arms at week 48. Twenty (20%) and 12 patients (13%) in the ENF and control arms, respectively, experienced at least one AIDS event during follow-up (P = 0.17). Although inducing a more rapid virological response, addition of ENF to a standard cART does not improve the immunological outcome in naive HIV-infected patients with severe immunosuppression. PMID:23165467

  11. Intensification of antiretroviral therapy through addition of enfuvirtide in naive HIV-1-infected patients with severe immunosuppression does not improve immunological response: results of a randomized multicenter trial (ANRS 130 Apollo).

    PubMed

    Joly, Véronique; Fagard, Catherine; Grondin, Carine; Descamps, Diane; Yazdanpanah, Yazdan; Charpentier, Charlotte; Colin de Verdiere, Nathalie; Tabuteau, Sophie; Raffi, François; Cabie, André; Chene, Geneviève; Yeni, Patrick

    2013-02-01

    We studied whether addition of enfuvirtide (ENF) to a background combination antiretroviral therapy (cART) would improve the CD4 cell count response at week 24 in naive patients with advanced HIV disease. ANRS 130 Apollo is a randomized study, conducted in naive HIV-1-infected patients, either asymptomatic with CD4 counts of <100/mm(3) or stage B/C disease with CD4 counts of <200/mm(3). Patients received tenofovir-emtricitabine with lopinavir-ritonavir (LPV/r) or efavirenz and were randomized to receive ENF for 24 weeks (ENF arm) or not (control arm). The primary endpoint was the proportion of patients with CD4 counts of ≥ 200/mm(3) at week 24. A total of 195 patients were randomized: 73% had stage C disease, 78% were male, the mean age was 44 years, the median CD4 count was 30/mm(3), and the median HIV-1 RNA load was 5.4 log(10) copies/ml. Eighty-one percent of patients received LPV/r. One patient was lost to follow-up, and eight discontinued the study (four in each arm). The proportions of patients with CD4 counts of ≥ 200/mm(3) at week 24 were 34% and 38% in the ENF and control arms, respectively (P = 0.53). The proportions of patients with HIV-1 RNA loads of <50 copies/ml were 74% and 58% at week 24 in the ENF and control arms, respectively (P < 0.02), and the proportion reached 79% in both arms at week 48. Twenty (20%) and 12 patients (13%) in the ENF and control arms, respectively, experienced at least one AIDS event during follow-up (P = 0.17). Although inducing a more rapid virological response, addition of ENF to a standard cART does not improve the immunological outcome in naive HIV-infected patients with severe immunosuppression.

  12. Mimas Showing False Colors #1

    NASA Technical Reports Server (NTRS)

    2005-01-01

    False color images of Saturn's moon, Mimas, reveal variation in either the composition or texture across its surface.

    During its approach to Mimas on Aug. 2, 2005, the Cassini spacecraft narrow-angle camera obtained multi-spectral views of the moon from a range of 228,000 kilometers (142,500 miles).

    The image at the left is a narrow angle clear-filter image, which was separately processed to enhance the contrast in brightness and sharpness of visible features. The image at the right is a color composite of narrow-angle ultraviolet, green, infrared and clear filter images, which have been specially processed to accentuate subtle changes in the spectral properties of Mimas' surface materials. To create this view, three color images (ultraviolet, green and infrared) were combined into a single black and white picture that isolates and maps regional color differences. This 'color map' was then superimposed over the clear-filter image at the left.

    The combination of color map and brightness image shows how the color differences across the Mimas surface materials are tied to geological features. Shades of blue and violet in the image at the right are used to identify surface materials that are bluer in color and have a weaker infrared brightness than average Mimas materials, which are represented by green.

    Herschel crater, a 140-kilometer-wide (88-mile) impact feature with a prominent central peak, is visible in the upper right of each image. The unusual bluer materials are seen to broadly surround Herschel crater. However, the bluer material is not uniformly distributed in and around the crater. Instead, it appears to be concentrated on the outside of the crater and more to the west than to the north or south. The origin of the color differences is not yet understood. It may represent ejecta material that was excavated from inside Mimas when the Herschel impact occurred. The bluer color of these materials may be caused by subtle differences in

  13. Additive Similarity Trees

    ERIC Educational Resources Information Center

    Sattath, Shmuel; Tversky, Amos

    1977-01-01

    Tree representations of similarity data are investigated. Hierarchical clustering is critically examined, and a more general procedure, called the additive tree, is presented. The additive tree representation is then compared to multidimensional scaling. (Author/JKS)

  14. Health Effects Models for Nuclear Power Plant Accident Consequence Analysis. Modification of Models Resulting from Addition of Effects of Exposure to Alpha-Emitting Radionuclides. Part 2. Scientific Bases for Health Effects Models. Revision 1. Addendum 2.

    DTIC Science & Technology

    1993-05-01

    been Sponsored by the Nuclear Regulatory Commission. Report NUREG /CR-2l4, Rev. 1, Part II (NRC, 1989a) describes in detail the most recent health...that address early-occurring and continuing effects, late somatic effects, and genetic effects. These results should be used with the basic NUREG

  15. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  16. Effects of Two-Year Vitamin B12 and Folic Acid Supplementation on Depressive Symptoms and Quality of Life in Older Adults with Elevated Homocysteine Concentrations: Additional Results from the B-PROOF Study, an RCT

    PubMed Central

    de Koning, Elisa J.; van der Zwaluw, Nikita L.; van Wijngaarden, Janneke P.; Sohl, Evelien; Brouwer-Brolsma, Elske M.; van Marwijk, Harm W. J.; Enneman, Anke W.; Swart, Karin M. A.; van Dijk, Suzanne C.; Ham, Annelies C.; van der Velde, Nathalie; Uitterlinden, André G.; Penninx, Brenda W. J. H.; Elders, Petra J. M.; Lips, Paul; Dhonukshe-Rutten, Rosalie A. M.; van Schoor, Natasja M.; de Groot, Lisette C. P. G. M.

    2016-01-01

    Lowering elevated plasma homocysteine (Hcy) concentrations by supplementing vitamin B12 and folic acid may reduce depressive symptoms and improve health-related quality of life (HR-QoL) in older adults. This study aimed to test this hypothesis in a randomized controlled trial. Participants (N = 2919, ≥65 years, Hcy concentrations ≥12 µmol/L) received either 500 µg vitamin B12 and 400 µg folic acid daily or placebo for two years. Both tablets contained 15 µg vitamin D3. Depressive symptoms were measured with the Geriatric Depression Scale-15 (GDS-15). HR-QoL was assessed with the SF-12 Mental and Physical component summary scores and the EQ-5D Index score and Visual Analogue Scale. Differences in two-year change scores were analyzed with Analysis of Covariance (ANCOVA). Hcy concentrations decreased more in the intervention group, but two-year change scores of the GDS-15 and three of four HR-QoL measures did not differ between groups. The EQ-5D Index score declined less in the intervention group than in the placebo group (mean change 0.00 vs. −0.02, p = 0.004). In conclusion, two-year supplementation with vitamin B12 and folic acid in older adults with hyperhomocysteinemia showed that lowering Hcy concentrations does not reduce depressive symptoms, but it may have a small positive effect on HR-QoL. PMID:27886078

  17. Dolphin shows and interaction programs: benefits for conservation education?

    PubMed

    Miller, L J; Zeigler-Hill, V; Mellen, J; Koeppel, J; Greer, T; Kuczaj, S

    2013-01-01

    Dolphin shows and dolphin interaction programs are two types of education programs within zoological institutions used to educate visitors about dolphins and the marine environment. The current study examined the short- and long-term effects of these programs on visitors' conservation-related knowledge, attitude, and behavior. Participants of both dolphin shows and interaction programs demonstrated a significant short-term increase in knowledge, attitudes, and behavioral intentions. Three months following the experience, participants of both dolphin shows and interaction programs retained the knowledge learned during their experience and reported engaging in more conservation-related behaviors. Additionally, the number of dolphin shows attended in the past was a significant predictor of recent conservation-related behavior suggesting that repetition of these types of experiences may be important in inspiring people to conservation action. These results suggest that both dolphin shows and dolphin interaction programs can be an important part of a conservation education program for visitors of zoological facilities.

  18. Additive interaction between heterogeneous environmental ...

    EPA Pesticide Factsheets

    BACKGROUND Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI) domain indices on preterm birth in the Unites States from 2000-2005.METHODS: The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built and sociodemographic) using principal component analyses. County-level preterm birth rates (n=3141) were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PD) and 95% confidence intervals (CI) comparing worse environmental quality to the better quality for each model for a) each individual domain main effect b) the interaction contrast and c) the two main effects plus interaction effect (i.e. the “net effect”) to show departure from additive interaction for the all U.S counties. Analyses were also performed for subgroupings by four urban/rural strata. RESULTS: We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction) associations. In the non-stratified model, we observed antagonistic interac

  19. Microbial phytase addition resulted in a greater increase in phosphorus digestibility in dry-fed compared with liquid-fed non-heat-treated wheat-barley-maize diets for pigs.

    PubMed

    Blaabjerg, K; Thomassen, A-M; Poulsen, H D

    2015-02-01

    The objective was to evaluate the effect of microbial phytase (1250 FTU/kg diet with 88% dry matter (DM)) on apparent total tract digestibility (ATTD) of phosphorus (P) in pigs fed a dry or soaked diet. Twenty-four pigs (65±3 kg) from six litters were used. Pigs were housed in metabolism crates and fed one of four diets for 12 days; 5 days for adaptation and 7 days for total, but separate collection of feces and urine. The basal diet was composed of wheat, barley, maize, soybean meal and no mineral phosphate. Dietary treatments were: basal dry-fed diet (BDD), BDD with microbial phytase (BDD+phy), BDD soaked for 24 h at 20°C before feeding (BDS) and BDS with microbial phytase (BDS+phy). Supplementation of microbial phytase increased ATTD of DM and crude protein (N×6.25) by 2 and 3 percentage units (P<0.0001; P<0.001), respectively. The ATTD of P was affected by the interaction between microbial phytase and soaking (P=0.02). This was due to a greater increase in ATTD of P by soaking of the diet containing solely plant phytase compared with the diet supplemented with microbial phytase: 35%, 65%, 44% and 68% for BDD, BDD+phy, BSD and BSD+phy, respectively. As such, supplementation of microbial phytase increased ATTD of P in the dry-fed diet, but not in the soaked diet. The higher ATTD of P for BDS compared with BDD resulted from the degradation of 54% of the phytate in BDS by wheat and barley phytases during soaking. On the other hand, soaking of BDS+phy did not increase ATTD of P significantly compared with BDD+phy despite that 76% of the phytate in BDS+phy was degraded before feeding. In conclusion, soaking of BDS containing solely plant phytase provided a great potential for increasing ATTD of P. However, this potential was not present when microbial phytase (1250 FTU/kg diet) was supplemented, most likely because soaking of BDS+phy for 24 h at 20°C did not result in a complete degradation of phytate before feeding.

  20. Nature's Late-Night Light Shows

    NASA Astrophysics Data System (ADS)

    Peterson, Carolyn Collins

    2002-09-01

    In addition to stars and planets, there are other interesting lights to be seen in the night sky. The northern and southern lights, called the aurora borealis and aurora australis, are created by charged particles from the Sun reacting in Earth's magnetic field. Night-shining clouds or noctilucent clouds appear at evening twilight as a result of water vapor in the polar mesosphere. Zodiacal light can be seen stretching up from the horizon after sunset or before sunrise.

  1. 75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) NORTH'S STORE (1900); BLACKSMITH SHOP (C. 1860, WITH ADDITIONS); AND DRYHOUSE (C. 1860, WITH ADDITIONS). C. 1905. - Quincy Mining Company, Hancock, Houghton County, MI

  2. Polylactides in additive biomanufacturing.

    PubMed

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed.

  3. Additive Manufactured Product Integrity

    NASA Technical Reports Server (NTRS)

    Waller, Jess; Wells, Doug; James, Steve; Nichols, Charles

    2017-01-01

    NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

  4. Dimensionless numbers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

    2017-02-01

    The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

  5. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  6. Active mineral additives of sapropel ashes

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

    2015-01-01

    The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

  7. 19F NMR-, ESR-, and vis-NIR-spectroelectrochemical study of the unconventional reduction behaviour of a perfluoroalkylated fullerene: dimerization of the C70(CF3)10 – radical anion† †Electronic supplementary information (ESI) available: Additional electrochemical and spectroscopic results, mass spectrometry study, and DFT-optimized Cartesian coordinates. See DOI: 10.1039/c5an01129a Click here for additional data file.

    PubMed Central

    Machata, Peter; Clikeman, Tyler T.; Rosenkranz, Marco

    2015-01-01

    The most abundant isomer of C70(CF3)10 (70-10-1) is a rare example of a perfluoroalkylated fullerene exhibiting electrochemically irreversible reduction. We show that electrochemical reversibility at the first reduction step is achieved at scan rates higher than 500 V s–1. Applying ESR-, vis-NIR-, and 19F NMR-spectroelectrochemistry, as well as mass spectrometry and DFT calculations, we show that the (70-10-1)– radical monoanion is in equilibrium with a singly-bonded diamagnetic dimeric dianion. This study is the first example of 19F NMR spectroelectrochemistry, which promises to be an important method for the elucidation of redox mechanisms of fluoroorganic compounds. Additionally, we demonstrate the importance of combining different spectroelectrochemical methods and quantitative analysis of the transferred charge and spin numbers in the determination of the redox mechanism. PMID:26359514

  8. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  9. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  10. Group Sparse Additive Models

    PubMed Central

    Yin, Junming; Chen, Xi; Xing, Eric P.

    2016-01-01

    We consider the problem of sparse variable selection in nonparametric additive models, with the prior knowledge of the structure among the covariates to encourage those variables within a group to be selected jointly. Previous works either study the group sparsity in the parametric setting (e.g., group lasso), or address the problem in the nonparametric setting without exploiting the structural information (e.g., sparse additive models). In this paper, we present a new method, called group sparse additive models (GroupSpAM), which can handle group sparsity in additive models. We generalize the ℓ1/ℓ2 norm to Hilbert spaces as the sparsity-inducing penalty in GroupSpAM. Moreover, we derive a novel thresholding condition for identifying the functional sparsity at the group level, and propose an efficient block coordinate descent algorithm for constructing the estimate. We demonstrate by simulation that GroupSpAM substantially outperforms the competing methods in terms of support recovery and prediction accuracy in additive models, and also conduct a comparative experiment on a real breast cancer dataset.

  11. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  12. Fused Lasso Additive Model

    PubMed Central

    Petersen, Ashley; Witten, Daniela; Simon, Noah

    2016-01-01

    We consider the problem of predicting an outcome variable using p covariates that are measured on n independent observations, in a setting in which additive, flexible, and interpretable fits are desired. We propose the fused lasso additive model (FLAM), in which each additive function is estimated to be piecewise constant with a small number of adaptively-chosen knots. FLAM is the solution to a convex optimization problem, for which a simple algorithm with guaranteed convergence to a global optimum is provided. FLAM is shown to be consistent in high dimensions, and an unbiased estimator of its degrees of freedom is proposed. We evaluate the performance of FLAM in a simulation study and on two data sets. Supplemental materials are available online, and the R package flam is available on CRAN. PMID:28239246

  13. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  14. Additives in plastics.

    PubMed

    Deanin, R D

    1975-06-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products.

  15. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  16. More Than Additional Space...

    ERIC Educational Resources Information Center

    CEFP Journal, 1973

    1973-01-01

    A much needed addition to the Jamestown Elementary School turned out to be more than an expansion of walls for more space. A new educational program, a limited budget, and a short time line were tackled on a team approach basis and were successfully resolved. (Author)

  17. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting.

  18. Dynamics of ultrasonic additive manufacturing.

    PubMed

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder.

  19. Time dependent patient no-show predictive modelling development.

    PubMed

    Huang, Yu-Li; Hanauer, David A

    2016-05-09

    Purpose - The purpose of this paper is to develop evident-based predictive no-show models considering patients' each past appointment status, a time-dependent component, as an independent predictor to improve predictability. Design/methodology/approach - A ten-year retrospective data set was extracted from a pediatric clinic. It consisted of 7,291 distinct patients who had at least two visits along with their appointment characteristics, patient demographics, and insurance information. Logistic regression was adopted to develop no-show models using two-thirds of the data for training and the remaining data for validation. The no-show threshold was then determined based on minimizing the misclassification of show/no-show assignments. There were a total of 26 predictive model developed based on the number of available past appointments. Simulation was employed to test the effective of each model on costs of patient wait time, physician idle time, and overtime. Findings - The results demonstrated the misclassification rate and the area under the curve of the receiver operating characteristic gradually improved as more appointment history was included until around the 20th predictive model. The overbooking method with no-show predictive models suggested incorporating up to the 16th model and outperformed other overbooking methods by as much as 9.4 per cent in the cost per patient while allowing two additional patients in a clinic day. Research limitations/implications - The challenge now is to actually implement the no-show predictive model systematically to further demonstrate its robustness and simplicity in various scheduling systems. Originality/value - This paper provides examples of how to build the no-show predictive models with time-dependent components to improve the overbooking policy. Accurately identifying scheduled patients' show/no-show status allows clinics to proactively schedule patients to reduce the negative impact of patient no-shows.

  20. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  1. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  2. Human platelet sulfotransferase shows seasonal rhythms.

    PubMed

    Marazziti, D; Palego, L; Mazzanti, C; Silvestri, S; Cassano, G B

    1995-04-01

    Our study aimed to investigate the possible presence of seasonal changes in platelet phenolsulfotransferase (ST) in a group of 20 healthy, drug-free subjects of both sexes between 24 and 37 years of age. Blood samples were taken four times a year in the period immediately following the equinoxes and the solstices. The results showed that both Sts underwent seasonal changes: the lowest values were found in autumn and in winter, and the highest in the summer. A positive correlation between the two STs and the length of the photoperiod was observed in winter whereas in the spring we detected a negative correlation between the TL ST and the photoperiod length. Future studies should clarify whether platelet ST of patients with mood disorders shows a similar seasonality.

  3. The earliest published electrocardiogram showing ventricular preexcitation.

    PubMed

    Von Knorre, Georg H

    2005-03-01

    When in 1930, Wolff, Parkinson, and White published what is today known as the WPW, or preexcitation syndrome, they, and subsequently others, found few comparable cases in the preceding literature. Among these the report of Cohn and Fraser, published in 1913, was the earliest. However, another even earlier documentation in a 1909 article by Hoffmann escaped notice till now. The ECG of a patient with paroxysmal tachycardia reveals a short PR interval and a delta-wave-induced widening of the QRS complex, even though the reproduced tachycardia was not preexcitation related. The interpretation of this poorly reproduced ECG can be confirmed by another and more detailed description of the patient in an electrocardiography textbook published in 1914 by the same author. Thus, the earliest publication of an ECG showing ventricular preexcitation now can be dated back to 1909. Moreover, the Hoffmann monograph contains two additional examples of the WPW syndrome not noticed until now. All three cases published by Hoffmann had their first ECG recordings in 1912 or earlier.

  4. Temperature Data Shows Warming in 2001

    NASA Technical Reports Server (NTRS)

    2002-01-01

    TThe figure above depicts how much air temperatures near the Earth's surface changed relative to the global mean temperature from 1951 to 1980. NASA researchers used maps of urban areas derived from city lights data to account for the 'heat island' effect of cities. The red and orange colors show that temperatures are warmer in most regions of the world when compared to the 1951 to 1980 'normal' temperatures. Warming around the world has been widespread, but it is not present everywhere. The largest warming is in Northern Canada, Alaska and Siberia, as indicated by the deeper red colors. The lower 48 United States have become warmer recently, but only enough to make the temperatures comparable to what they were in the 1930s. The scale on the bottom of these temperature anomaly images represent degrees in Celsius. The negative numbers represent cooling and the positive numbers depict warming. Overall, the air temperature near the Earth's surface has warmed by 1oF (0.6oC) globally, on average, over the last century. For more information and additional images, read Satellites Shed Light on a Warmer World. Image courtesy Goddard Institute for Space Studies (GISS).

  5. Additive composition, for gasoline

    SciTech Connect

    Vataru, M.

    1989-01-10

    An admixture is described that comprises Diesel fuel and an additive composition added thereto which is between about 0.05 to about 2.0 percent by weight of the fuel, the composition comprising: (a) between about 0.05 and 25% relative weight parts of an organic peroxide, and (b) between about 0.1 and 25% relative weight parts of detergent selected from the component group that consists of: (i) fatty amines; (ii) ethoxylated and propoxylated derivatives of fatty amines; (iii) fatty diamines; (iv) fatty imidazlines; (v) polymeric amines and derivatives thereof; (vi) combination of one or more of the (i) through (v) components with carboxylic acid or acids having from three to forth carbon atoms, (c) from about 99.0 to about 50% by weight of a hydrocarbon solvent.

  6. Teardrop bladder: additional considerations

    SciTech Connect

    Wechsler, R.J.; Brennan, R.E.

    1982-07-01

    Nine cases of teardrop bladder (TDB) seen at excretory urography are presented. In some of these patients, the iliopsoas muscles were at the upper limit of normal in size, and additional evaluation of the perivesical structures with computed tomography (CT) was necessary. CT demonstrated only hypertrophied muscles with or without perivesical fat. The psoas muscles and pelvic width were measured in 8 patients and compared with the measurements of a control group of males without TDB. Patients with TDB had large iliopsoas muscles and narrow pelves compared with the control group. The psoas muscle width/pelvic width ratio was significantly greater (p < 0.0005) in patients with TDB than in the control group, with values of 1.04 + 0.05 and 0.82 + 0.09, respectively. It is concluded that TDB is not an uncommon normal variant in black males. Both iliopsoas muscle hypertrophy and a narrow pelvis are factors that predispose a patient to TDB.

  7. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  8. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  9. Amine-intercalated α-zirconium phosphates as lubricant additives

    NASA Astrophysics Data System (ADS)

    Xiao, Huaping; Dai, Wei; Kan, Yuwei; Clearfield, Abraham; Liang, Hong

    2015-02-01

    In this study, three types of amines intercalated α-zirconium phosphate nanosheets with different interspaces were synthesized and examined as lubricant additives to a mineral oil. Results from tribological experiments illustrated that these additives improved lubricating performance. Results of rheological experiments showed that the viscosity of the mineral oil was effectively reduced with the addition of α-zirconium phosphate nanosheets. The two-dimensional structure, with larger interspaces, resulting from amine intercalation, exhibited improved effectiveness in reducing viscosity. This study demonstrates that the nanosheet structure of α-zirconium phosphates is effective in friction reduction. The manufacture of lubricants with tailored viscosity is possible by using different intercalators.

  10. Mercury's Core Molten, Radar Study Shows

    NASA Astrophysics Data System (ADS)

    2007-05-01

    Scientists using a high-precision planetary radar technique for the first time have discovered that the innermost planet Mercury probably has a molten core, resolving a mystery of more than three decades. The discovery, which used the National Science Foundation's Robert C. Byrd Green Bank Telescope in West Virginia and Arecibo Observatory in Puerto Rico, and NASA/Jet Propulsion Laboratory antennas in California, is an important step toward a better understanding of how planets form and evolve. Planetary Radar High-precision planetary radar technique sent signal to Mercury, received reflection. CREDIT: Bill Saxton, NRAO/AUI/NSF Click on image for high-resolution file (447 KB) "For a long time it was thought we'd have to land spacecraft on Mercury to learn if its core is solid or molten. Now we've answered that question using ground-based telescopes," said Jean-Luc Margot, of Cornell University, leader of the research team, which published its results in the May 4 issue of the journal Science. Mercury is one of the least-understood of the planets in our Solar System. Its distance from the Sun is just over one-third that of the Earth, and it contains a mass just 5½ percent that of Earth. Only about half of Mercury's surface has been photographed by a spacecraft, Mariner 10, back in 1974. Mariner 10 also discovered that Mercury has a weak magnetic field, about one percent as strong as Earth's. That discovery spurred a scientific debate about the planet's core. Scientists normally expect a rocky planet's magnetic field to be caused by an electromagnetic dynamo in a molten core. However, Mercury is so small that most scientists expected its core to have cooled and solidified long ago. Those scientists speculated that the magnetic field seen today may have been "frozen" into the planet when the core cooled. "Whether the core is molten or solid today depends greatly on the chemical composition of the core. That chemical composition can provide important clues about the

  11. Additive lattice kirigami.

    PubMed

    Castle, Toen; Sussman, Daniel M; Tanis, Michael; Kamien, Randall D

    2016-09-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  12. Ceramics with Different Additives

    NASA Astrophysics Data System (ADS)

    Wang, Juanjuan; Feng, Lajun; Lei, Ali; Zhao, Kang; Yan, Aijun

    2014-09-01

    Li2CO3, MgCO3, BaCO3, and Bi2O3 dopants were introduced into CaCu3Ti4O12 (CCTO) ceramics in order to improve the dielectric properties. The CCTO ceramics were prepared by conventional solid-state reaction method. The phase structure, microstructure, and dielectric behavior were carefully investigated. The pure structure without any impurity phases can be confirmed by the x-ray diffraction patterns. Scanning Electron Microscopy (SEM) analysis illuminated that the grains of Ca0.90Li0.20Cu3Ti4O12 ceramics were greater than that of pure CCTO. It was important for the properties of the CCTO ceramics to study the additives in complex impedance spectroscopy. It was found that the Ca0.90Li0.20Cu3Ti4O12 ceramics had the higher permittivity (>45000), the lower dielectric loss (<0.025) than those of CCTO at 1 kHz at room temperature and good temperature stability from -30 to 75 °C.

  13. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  14. Molecular Aluminum Additive for Burn Enhancement of Hydrocarbon Fuels.

    PubMed

    Guerieri, Philip M; DeCarlo, Samantha; Eichhorn, Bryan; Connell, Terrence; Yetter, Richard A; Tang, Xin; Hicks, Zachary; Bowen, Kit H; Zachariah, Michael R

    2015-11-12

    Additives to hydrocarbon fuels are commonly explored to change the combustion dynamics, chemical distribution, and/or product integrity. Here we employ a novel aluminum-based molecular additive, Al(I) tetrameric cluster [AlBrNEt3]4 (Et = C2H5), to a hydrocarbon fuel and evaluate the resultant single-droplet combustion properties. This Al4 cluster offers a soluble alternative to nanoscale particulate additives that have recently been explored and may mitigate the observed problems of particle aggregation. Results show the [AlBrNEt3]4 additive to increase the burn rate constant of a toluene-diethyl ether fuel mixture by ∼20% in a room temperature oxygen environment with only 39 mM of active aluminum additive (0.16 wt % limited by additive solubility). In comparison, a roughly similar addition of nano-aluminum particulate shows no discernible difference in burn properties of the hydrocarbon fuel. High speed video shows the [AlBrNEt3]4 to induce microexplosive gas release events during the last ∼30% of the droplet combustion time. We attribute this to HBr gas release based on results of temperature-programmed reaction (TPR) experiments of the [AlBrNEt3]4 dosed with O2 and D2O. A possible mechanism of burn rate enhancement is presented that is consistent with microexplosion observations and TPR results.

  15. Moon Phase & Libration 2013: Additional Graphics

    NASA Video Gallery

    This visualization shows the phase and libration of the Moon throughout the year 2013, at hourly intervals. Each frame represents one hour. In addition, this version of the visualization shows addi...

  16. Non-additive and additive genetic effects on extraversion in 3314 Dutch adolescent twins and their parents.

    PubMed

    Rettew, David C; Rebollo-Mesa, Irene; Hudziak, James J; Willemsen, Gonneke; Boomsma, Dorret I

    2008-05-01

    The influence of non-additive genetic influences on personality traits has been increasingly reported in adult populations. Less is known, however, with respect to younger samples. In this study, we examine additive and non-additive genetic contributions to the personality trait of extraversion in 1,689 Dutch twin pairs, 1,505 mothers and 1,637 fathers of the twins. The twins were on average 15.5 years (range 12-18 years). To increase statistical power to detect non-additive genetic influences, data on extraversion were also collected in parents and simultaneously analyzed. Genetic modeling procedures incorporating age as a potential modifier of heritability showed significant influences of additive (20-23%) and non-additive genetic factors (31-33%) in addition to unshared environment (46-48%) for adolescents and for their parents. The additive genetic component was slightly and positively related to age. No significant sex differences were found for either extraversion means or for the magnitude of the genetic and environmental influences. There was no evidence of non-random mating for extraversion in the parental generation. Results show that in addition to additive genetic influences, extraversion in adolescents is influenced by non-additive genetic factors.

  17. 3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING A GROUP OF HAGERSTOWN HIGH SCHOOL STUDENTS IN THE PROCESS OF UNCOVERING THE ADDITIONAL FOUNDATION - Jonathan Hager House (Foundation), Hagerstown, Washington County, MD

  18. Antenna cab interior showing waveguide from external parabolic antenna (later ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Antenna cab interior showing waveguide from external parabolic antenna (later addition), looking north. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA

  19. 5. EXTERIOR OF NORTH END OF BUILDING 105 SHOWING 1946 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF NORTH END OF BUILDING 105 SHOWING 1946 BEDROOM ADDITION. BUILDING 108 IS VISIBLE AT EXTREME PHOTO LEFT. VIEW TO SOUTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  20. 33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING PLAN AND LOCATION OF PROPOSED ADDITIONS, METROPOLITAN WATER AND SEWERAGE BOARD, METROPOLITAN SEWERAGE WORKS, JULY 1908. Aperture card 6417. - Deer Island Pumping Station, Boston, Suffolk County, MA

  1. 3. MAIN ELEVATION, DETAIL SHOWING HEWN LOGS WITH HALFDOVETAIL JOINTS; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. MAIN ELEVATION, DETAIL SHOWING HEWN LOGS WITH HALF-DOVETAIL JOINTS; LATHE AND PLASTER ADDITION; AND CLAPBOARD SIDING - Shinn-Curtis Log Cabin, 23 Washington Street (moved from Rancocas Boulevard), Mount Holly, Burlington County, NJ

  2. Weldability of Additive Manufactured Stainless Steel

    NASA Astrophysics Data System (ADS)

    Matilainen, Ville-Pekka; Pekkarinen, Joonas; Salminen, Antti

    Part size in additive manufacturing is limited by the size of building area of AM equipment. Occasionally, larger constructions that AM machines are able to produce, are needed, and this creates demand for welding AM parts together. However there is very little information on welding of additive manufactured stainless steels. The aim of this study was to investigate the weldability aspects of AM material. In this study, comparison of the bead on plate welds between AM parts and sheet metal parts is done. Used material was 316L stainless steel, AM and sheet metal, and parts were welded with laser welding. Weld quality was evaluated visually from macroscopic images. Results show that there are certain differences in the welds in AM parts compared to the welds in sheet metal parts. Differences were found in penetration depths and in type of welding defects. Nevertheless, this study presents that laser welding is suitable process for welding AM parts.

  3. Housekeeping genes tend to show reduced upstream sequence conservation

    PubMed Central

    Farré, Domènec; Bellora, Nicolás; Mularoni, Loris; Messeguer, Xavier; Albà, M Mar

    2007-01-01

    Background Understanding the constraints that operate in mammalian gene promoter sequences is of key importance to understand the evolution of gene regulatory networks. The level of promoter conservation varies greatly across orthologous genes, denoting differences in the strength of the evolutionary constraints. Here we test the hypothesis that the number of tissues in which a gene is expressed is related in a significant manner to the extent of promoter sequence conservation. Results We show that mammalian housekeeping genes, expressed in all or nearly all tissues, show significantly lower promoter sequence conservation, especially upstream of position -500 with respect to the transcription start site, than genes expressed in a subset of tissues. In addition, we evaluate the effect of gene function, CpG island content and protein evolutionary rate on promoter sequence conservation. Finally, we identify a subset of transcription factors that bind to motifs that are specifically over-represented in housekeeping gene promoters. Conclusion This is the first report that shows that the promoters of housekeeping genes show reduced sequence conservation with respect to genes expressed in a more tissue-restricted manner. This is likely to be related to simpler gene expression, requiring a smaller number of functional cis-regulatory motifs. PMID:17626644

  4. Showing Emulsion Properties with Common Dairy Foods

    NASA Astrophysics Data System (ADS)

    Bravo-Diaz, Carlos; Gonzalez-Romero, Elisa

    1996-09-01

    Foods are mixtures of different chemical compounds, and the quality we sense (taste, texture, color, etc.) are all manifestations of its chemical properties. Some of them can be visualized with the aid of simple, safe and inexpensive experiments using dairy products that can be found in any kitchen and using almost exclusively kitchen utensils. In this paper we propose some of them related with food emulsions. Food emulsions cover an extremely wide area of daily-life applications such as milk, sauces, dressings and beverages. Experimentation with some culinary recipes to prepare them and the analyisis of the observed results is close to ideal subject for the introduction of chemical principles, allowing to discuss about the nature and composition of foods, the effects of additives, etc. At the same time it allows to get insights into the scientific reasons that underlie on the recipes (something that it is not usually found in most cookbooks). For example, when making an emulsion like mayonnaise, why the egg yolks and water are the first materials in the bowl , and the oil is added to them rather than in the other way around? How you can "rescue" separate emulsions (mayonnaise)? Which parameters affect emulsion stability? Since safety, in its broad sense, is the first requisite for any food, concerns about food exist throughout the world and the more we are aware of our everyday life, the more likely we will be to deal productively with the consequences. On the other hand, understanding what foods are and how cooking works destroys no delightful mystery of the art of cuisine, instead the mystery expands.

  5. Tetrahydrobiopterin shows chaperone activity for tyrosine hydroxylase.

    PubMed

    Thöny, Beat; Calvo, Ana C; Scherer, Tanja; Svebak, Randi M; Haavik, Jan; Blau, Nenad; Martinez, Aurora

    2008-07-01

    Tyrosine hydroxylase (TH) is the rate-limiting enzyme in the synthesis of catecholamine neurotransmitters. Primary inherited defects in TH have been associated with l-DOPA responsive and non-responsive dystonia and infantile parkinsonism. In this study, we show that both the cofactor (6R)-l-erythro-5,6,7,8-tetrahydrobiopterin (BH(4)) and the feedback inhibitor and catecholamine product dopamine increase the kinetic stability of human TH isoform 1 in vitro. Activity measurements and synthesis of the enzyme by in vitro transcription-translation revealed a complex regulation by the cofactor including both enzyme inactivation and conformational stabilization. Oral BH(4) supplementation to mice increased TH activity and protein levels in brain extracts, while the Th-mRNA level was not affected. All together our results indicate that the molecular mechanisms for the stabilization are a primary folding-aid effect of BH(4) and a secondary effect by increased synthesis and binding of catecholamine ligands. Our results also establish that orally administered BH(4) crosses the blood-brain barrier and therapeutic regimes based on BH(4) supplementation should thus consider the effect on TH. Furthermore, BH(4) supplementation arises as a putative therapeutic agent in the treatment of brain disorders associated with TH misfolding, such as for the human TH isoform 1 mutation L205P.

  6. Malignant melanoma showing a rapid response to nivolumab.

    PubMed

    Tsutsumi, Miho; Asai, Jun; Wada, Makoto; Takenaka, Hideya; Katoh, Norito

    2016-02-01

    Malignant melanoma is a highly aggressive skin tumour, with a recent rise in incidence. Nivolumab is a recently developed anti-programmed cell death-1 immune checkpoint inhibitor and its usage has resulted in a significant improvement in the overall survival of patients with metastatic melanomas. We report a case of advanced melanoma that showed a significant and rapid response to nivolumab treatment. The patient displayed multiple melanoma-associated vitiligo prior to treatment; this symptom was theorised to indicate potentially immunoreactive melanoma and the need for nivolumab. In addition, interferon-β was injected prior to nivolumab treatment. The significant rapid response to nivolumab suggested the induction of a marked immune response against melanoma by interferon-β. Therefore, interferon-β could be a useful and effective adjuvant for nivolumab therapy.

  7. High Flow Addition Curing Polyimides

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Vannucci, Raymond D.; Ansari, Irfan; Cerny, Lawrence L.; Scheiman, Daniel A.

    1994-01-01

    A new series of high flow PMR-type addition curing polyimides was developed, which employed the substitution of 2,2'-bis (trifluoromethyl) -4,4'-diaminobiphenyl (BTDB) for p-phenylenediamine (p -PDA) in a PMR-IL formulation. These thermoset polyimides, designated as 12F resins, were prepared from BTDB and the dimethyl ester of 4,4'- (hexafluo- roisopropylidene) -diphthalic acid (HFDE) with either nadic ester (NE) or p-aminostyrene (PAS) as the endcaps for addition curing. The 12F prepolymers displayed lower melting temperatures in DSC analysis, and higher melt flow in rheological studies than the cor- responding PMR-11 polyimides. Long-term isothermal aging studies showed that BTDB- based 12F resins exhibited comparable thermo-oxidative stability to P-PDA based PMR-11 polyimides. The noncoplanar 2- and 2'-disubstituted biphenyldiamine (BTDB) not only lowered the melt viscosities of 12F prepolymers, but also retained reasonable thermal sta- bility of the cured resins. The 12F polyimide resin with p-aminostyrene endcaps showed the best promise for long-term, high-temperature application at 343 C (650 F).

  8. Effect of glutathione addition in sparkling wine.

    PubMed

    Webber, Vanessa; Dutra, Sandra Valduga; Spinelli, Fernanda Rodrigues; Marcon, Ângela Rossi; Carnieli, Gilberto João; Vanderlinde, Regina

    2014-09-15

    This study aims to evaluate the effect of the addition of glutathione (GSH) on secondary aromas and on the phenolic compounds of sparkling wine elaborated by traditional method. It was added 10 and 20 mg L(-1) of GSH to must and to base wine. The determination of aroma compounds was performed by gas chromatography. Phenolic compounds and glutathione content were analyzed by high performance liquid chromatography. Sparkling wines with addition of GSH to must showed lower levels of total phenolic compounds and hydroxycinnamic acids. Furthermore, the sparkling wine with addition of GSH to must showed higher levels of 2-phenylethanol, 3-methyl-1-butanol and diethyl succinate, and lower concentrations of ethyl decanoate, octanoic and decanoic acids. The GSH addition to the must show a greater influence on sparkling wine than to base wine, however GSH addition to base wine seems retain higher SO2 free levels. The concentration of GSH added showed no significant difference.

  9. Additive-driven assembly of block copolymers

    NASA Astrophysics Data System (ADS)

    Lin, Ying; Daga, Vikram; Anderson, Eric; Watkins, James

    2011-03-01

    One challenge to the formation of well ordered hybrid materials is the incorporation of nanoscale additives including metal, semiconductor and dielectric nanoparticles at high loadings while maintaining strong segregation. Here we describe the molecular and functional design of small molecule and nanoparticle additives that enhance phase segregation in their block copolymer host and enable high additive loadings. Our approach includes the use of hydrogen bond interactions between the functional groups on the additive or particle that serve as hydrogen bond donors and one segment of the block copolymer containing hydrogen bond acceptors. Further, the additives show strong selectively towards the targeted domains, leading to enhancements in contrast between properties of the phases. In addition to structural changes, we explore how large changes in the thermal and mechanical properties occur upon incorporation of the additives. Generalization of this additive-induced ordering strategy to various block copolymers will be discussed.

  10. NASA GIBS Use in Live Planetarium Shows

    NASA Astrophysics Data System (ADS)

    Emmart, C. B.

    2015-12-01

    The American Museum of Natural History's Hayden Planetarium was rebuilt in year 2000 as an immersive theater for scientific data visualization to show the universe in context to our planet. Specific astrophysical movie productions provide the main daily programming, but interactive control software, developed at AMNH allows immersive presentation within a data aggregation of astronomical catalogs called the Digital Universe 3D Atlas. Since 2006, WMS globe browsing capabilities have been built into a software development collaboration with Sweden's Linkoping University (LiU). The resulting Uniview software, now a product of the company SCISS, is operated by about fifty planetariums around that world with ability to network amongst the sites for global presentations. Public presentation of NASA GIBS has allowed authoritative narratives to be presented within the range of data available in context to other sources such as Science on a Sphere, NASA Earth Observatory and Google Earth KML resources. Specifically, the NOAA supported World Views Network conducted a series of presentations across the US that focused on local ecological issues that could then be expanded in the course of presentation to national and global scales of examination. NASA support of for GIBS resources in an easy access multi scale streaming format like WMS has tremendously enabled particularly facile presentations of global monitoring like never before. Global networking of theaters for distributed presentations broadens out the potential for impact of this medium. Archiving and refinement of these presentations has already begun to inform new types of documentary productions that examine pertinent, global interdependency topics.

  11. Basophil activation test with food additives in chronic urticaria patients.

    PubMed

    Kang, Min-Gyu; Song, Woo-Jung; Park, Han-Ki; Lim, Kyung-Hwan; Kim, Su-Jung; Lee, Suh-Young; Kim, Sae-Hoon; Cho, Sang-Heon; Min, Kyung-Up; Chang, Yoon-Seok

    2014-01-01

    The role of food additives in chronic urticaria (CU) is still under investigation. In this study, we aimed to explore the association between food additives and CU by using the basophil activation test (BAT). The BAT using 15 common food additives was performed for 15 patients with CU who had a history of recurrent urticarial aggravation following intake of various foods without a definite food-specific IgE. Of the 15 patients studied, two (13.3%) showed positive BAT results for one of the tested food additives. One patient responded to monosodium glutamate, showing 18.7% of CD203c-positive basophils. Another patient showed a positive BAT result to sodium benzoate. Both patients had clinical correlations with the agents, which were partly determined by elimination diets. The present study suggested that at least a small proportion of patients with CU had symptoms associated with food additives. The results may suggest the potential utility of the BAT to identity the role of food additives in CU.

  12. Shale JP-4 Additive Evaluation

    DTIC Science & Technology

    1986-10-01

    8217. •% . , ’ ,,,r ,% . -- - ,.-. ’ ’ 4,w% %’. " - ,’ . . . * ’, .* . TABLE OF CONTENTS .4q ,4 . * SECTION PAGE I. INTRODUCTION 1 II. TEST PARAMETERS 2 1...42 PRECEDING PAGE BLANK TABLE OF CONTENTS (CON’T) SECT ION PAGE V. CONCLUSIONS 44 REFERENCES 46 APPENDIX A Drum to Test Sample Relationship 47 APPENDIX...B.O.C.L.E. Results 40 vii LIST OF TABLES TABLE PAGE 1 Antioxidants 3 2 Raw Shale/Petroleum Fuel Properties 10 3 Drum Sample Additive Content 13 4

  13. The Physics of Equestrian Show Jumping

    ERIC Educational Resources Information Center

    Stinner, Art

    2014-01-01

    This article discusses the kinematics and dynamics of equestrian show jumping. For some time I have attended a series of show jumping events at Spruce Meadows, an international equestrian center near Calgary, Alberta, often referred to as the "Wimbledon of equestrian jumping." I have always had a desire to write an article such as this…

  14. Serving Up Activities for TV Cooking Shows.

    ERIC Educational Resources Information Center

    Katchen, Johanna E.

    This paper documents a presentation given on the use of English-language television cooking shows in English-as-a-Second-Language (ESL) and English-as-a-Foreign-Language (EFL) classrooms in Taiwan. Such shows can be ideal for classroom use, since they have a predictable structure consisting of short segments, are of interest to most students,…

  15. 47 CFR 90.505 - Showing required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MOBILE RADIO SERVICES Developmental Operation § 90.505 Showing required. (a) Except as provided in paragraph (b) of this section, each application for developmental operation shall be accompanied by a showing that: (1) The applicant has an organized plan of development leading to a specific objective;...

  16. The Language of Show Biz: A Dictionary.

    ERIC Educational Resources Information Center

    Sergel, Sherman Louis, Ed.

    This dictionary of the language of show biz provides the layman with definitions and essays on terms and expressions often used in show business. The overall pattern of selection was intended to be more rather than less inclusive, though radio, television, and film terms were deliberately omitted. Lengthy explanations are sometimes used to express…

  17. DAST in Flight Showing Diverging Wingtip Oscillations

    NASA Technical Reports Server (NTRS)

    1980-01-01

    normal stiffness. This was done because stiffness requires structural weight but ensures freedom from flutter-an uncontrolled, divergent oscillation of the structure, driven by aerodynamic forces and resulting in structural failure. The program used refined theoretical tools to predict at what speed flutter would occur. It then designed a high-response control system to counteract the motion and permit a much lighter wing structure. The wing had, in effect, 'electronic stiffness.' Flight research with this concept was extremely hazardous because an error in either the flutter prediction or control system implementation would result in wing structural failure and the loss of the vehicle. Because of this, flight demonstration of a sub-scale vehicle made sense from the standpoint of both safety and cost. The program anticipated structural failure during the course of the flight research. The Firebee II was a supersonic drone selected as the DAST testbed because its wing could be easily replaced, it used only tail-mounted control surfaces, and it was available as surplus from the U. S. Air Force. It was capable of 5-g turns (that is, turns producing acceleration equal to 5 times that of gravity). Langley outfitted a drone with an aeroelastic, supercritical research wing suitable for a Mach 0.98 cruise transport with a predicted flutter speed of Mach 0.95 at an altitude of 25,000 feet. Dryden and Langley, in conjunction with Boeing, designed and fabricated a digital flutter suppression system (FSS). Dryden developed an RPRV (remotely piloted research vehicle) flight control system; integrated the wing, FSS, and vehicle systems; and conducted the flight program. In addition to a digital flight control system and aeroelastic wings, each DAST drone had research equipment mounted in its nose and a mid-air retrieval system in its tail. The drones were originally launched from the NASA B-52 bomber and later from a DC-130. The DAST vehicle's flight was monitored from the sky by an F

  18. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  19. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  20. Cincinnati Big Area Additive Manufacturing (BAAM)

    SciTech Connect

    Duty, Chad E.; Love, Lonnie J.

    2015-03-04

    Oak Ridge National Laboratory (ORNL) worked with Cincinnati Incorporated (CI) to demonstrate Big Area Additive Manufacturing which increases the speed of the additive manufacturing (AM) process by over 1000X, increases the size of parts by over 10X and shows a cost reduction of over 100X. ORNL worked with CI to transition the Big Area Additive Manufacturing (BAAM) technology from a proof-of-principle (TRL 2-3) demonstration to a prototype product stage (TRL 7-8).

  1. The benefits of health information technology: a review of the recent literature shows predominantly positive results.

    PubMed

    Buntin, Melinda Beeuwkes; Burke, Matthew F; Hoaglin, Michael C; Blumenthal, David

    2011-03-01

    An unprecedented federal effort is under way to boost the adoption of electronic health records and spur innovation in health care delivery. We reviewed the recent literature on health information technology to determine its effect on outcomes, including quality, efficiency, and provider satisfaction. We found that 92 percent of the recent articles on health information technology reached conclusions that were positive overall. We also found that the benefits of the technology are beginning to emerge in smaller practices and organizations, as well as in large organizations that were early adopters. However, dissatisfaction with electronic health records among some providers remains a problem and a barrier to achieving the potential of health information technology. These realities highlight the need for studies that document the challenging aspects of implementing health information technology more specifically and how these challenges might be addressed.

  2. Simulation shows hospitals that cooperate on infection control obtain better results than hospitals acting alone.

    PubMed

    Lee, Bruce Y; Bartsch, Sarah M; Wong, Kim F; Yilmaz, S Levent; Avery, Taliser R; Singh, Ashima; Song, Yeohan; Kim, Diane S; Brown, Shawn T; Potter, Margaret A; Platt, Richard; Huang, Susan S

    2012-10-01

    Efforts to control life-threatening infections, such as with methicillin-resistant Staphylococcus aureus (MRSA), can be complicated when patients are transferred from one hospital to another. Using a detailed computer simulation model of all hospitals in Orange County, California, we explored the effects when combinations of hospitals tested all patients at admission for MRSA and adopted procedures to limit transmission among patients who tested positive. Called "contact isolation," these procedures specify precautions for health care workers interacting with an infected patient, such as wearing gloves and gowns. Our simulation demonstrated that each hospital's decision to test for MRSA and implement contact isolation procedures could affect the MRSA prevalence in all other hospitals. Thus, our study makes the case that further cooperation among hospitals--which is already reflected in a few limited collaborative infection control efforts under way--could help individual hospitals achieve better infection control than they could achieve on their own.

  3. Gene Therapy Shows Promise for Aggressive Lymphoma

    MedlinePlus

    ... fullstory_163824.html Gene Therapy Shows Promise for Aggressive Lymphoma Over one-third of patients appeared disease- ... 2017 (HealthDay News) -- An experimental gene therapy for aggressive non-Hodgkin lymphoma beat back more than a ...

  4. Poverty Harder on Women's Hearts, Research Shows

    MedlinePlus

    ... page: https://medlineplus.gov/news/fullstory_163168.html Poverty Harder on Women's Hearts, Research Shows Poor females ... reduce the burden of cardiovascular disease around the world," Peters said. The study findings were published online ...

  5. Do dogs (Canis familiaris) show contagious yawning?

    PubMed

    Harr, Aimee L; Gilbert, Valerie R; Phillips, Kimberley A

    2009-11-01

    We report an experimental investigation into whether domesticated dogs display contagious yawning. Fifteen dogs were shown video clips of (1) humans and (2) dogs displaying yawns and open-mouth expressions (not yawns) to investigate whether dogs showed contagious yawning to either of these social stimuli. Only one dog performed significantly more yawns during or shortly after viewing yawning videos than to the open-mouth videos, and most of these yawns occurred to the human videos. No dogs showed significantly more yawning to the open-mouth videos (human or dog). The percentage of dogs showing contagious yawning was less than chimpanzees and humans showing this behavior, and considerably less than a recently published report investigating this behavior in dogs (Joly-Mascheroni et al. in Biol Lett 4:446-448, 2008).

  6. Spacecraft Image Mashup Shows Galactic Collision

    NASA Video Gallery

    This new composite image from the Chandra X-ray Observatory, the Hubble Space Telescope, and the Spitzer Space Telescope shows two colliding galaxies more than a 100 million years after they first ...

  7. Study Shows How Zika Attacks Infant Brain

    MedlinePlus

    ... gov/news/fullstory_162514.html Study Shows How Zika Attacks Infant Brain Virus can copy itself thousands ... New research paints a chilling portrait of how Zika ravages the infant brain. Scientists from the U.S. ...

  8. Fecal Transplant Shows Early Promise Against Autism

    MedlinePlus

    ... 163263.html Fecal Transplant Shows Early Promise Against Autism Small study found giving healthy gut bacteria to ... study suggests a novel treatment for kids with autism: Give these young patients a fresh supply of ...

  9. TRMM Satellite Shows Heavy Rainfall in Cristina

    NASA Video Gallery

    NASA's TRMM satellite rainfall data was overlaid on an enhanced visible/infrared image from NOAA's GOES-East satellite showing cloud and rainfall extent. Green areas indicate rainfall at over 20 mm...

  10. GOES Satellite Data Shows Tornado Development

    NASA Video Gallery

    This animation of NOAA's GOES-East satellite data shows the development and movement of the weather system that spawned tornadoes affecting the southern and eastern U.S. states on April 27-29, 2014...

  11. Addition and Subtraction by Students with Down Syndrome

    ERIC Educational Resources Information Center

    Herrera, Aurelia Noda; Bruno, Alicia; Gonzalez, Carina; Moreno, Lorenzo; Sanabria, Hilda

    2011-01-01

    We present a research report on addition and subtraction conducted with Down syndrome students between the ages of 12 and 31. We interviewed a group of students with Down syndrome who executed algorithms and solved problems using specific materials and paper and pencil. The results show that students with Down syndrome progress through the same…

  12. Map showing fluorspar deposits in Colorado

    USGS Publications Warehouse

    Brady, Bruce T.

    1975-01-01

    Increased fluorine consumption (U.S. Bureau of Mines, 1946-1971) coupled with limited proved reserves has stimulated extensive exploration for fluorine and intensive research into developing new sources of fluorine or substitutes. A summary of the distribution, geochemical and geologic environments, and production history of selected fluorspar occurrences, deposits, and districts is provided here with the hope that this information will help to stimulate exploration and discovery of additional fluorspar resources in Colorado to augment our dwindling domestic supply.

  13. Educational Outreach: The Space Science Road Show

    NASA Astrophysics Data System (ADS)

    Cox, N. L. J.

    2002-01-01

    The poster presented will give an overview of a study towards a "Space Road Show". The topic of this show is space science. The target group is adolescents, aged 12 to 15, at Dutch high schools. The show and its accompanying experiments would be supported with suitable educational material. Science teachers at schools can decide for themselves if they want to use this material in advance, afterwards or not at all. The aims of this outreach effort are: to motivate students for space science and engineering, to help them understand the importance of (space) research, to give them a positive feeling about the possibilities offered by space and in the process give them useful knowledge on space basics. The show revolves around three main themes: applications, science and society. First the students will get some historical background on the importance of space/astronomy to civilization. Secondly they will learn more about novel uses of space. On the one hand they will learn of "Views on Earth" involving technologies like Remote Sensing (or Spying), Communication, Broadcasting, GPS and Telemedicine. On the other hand they will experience "Views on Space" illustrated by past, present and future space research missions, like the space exploration missions (Cassini/Huygens, Mars Express and Rosetta) and the astronomy missions (Soho and XMM). Meanwhile, the students will learn more about the technology of launchers and satellites needed to accomplish these space missions. Throughout the show and especially towards the end attention will be paid to the third theme "Why go to space"? Other reasons for people to get into space will be explored. An important question in this is the commercial (manned) exploration of space. Thus, the questions of benefit of space to society are integrated in the entire show. It raises some fundamental questions about the effects of space travel on our environment, poverty and other moral issues. The show attempts to connect scientific with

  14. Liquid Crystal Research Shows Deformation By Drying

    NASA Technical Reports Server (NTRS)

    2003-01-01

    These images, from David Weitz's liquid crystal research, show ordered uniform sized droplets (upper left) before they are dried from their solution. After the droplets are dried (upper right), they are viewed with crossed polarizers that show the deformation caused by drying, a process that orients the bipolar structure of the liquid crystal within the droplets. When an electric field is applied to the dried droplets (lower left), and then increased (lower right), the liquid crystal within the droplets switches its alignment, thereby reducing the amount of light that can be scattered by the droplets when a beam is shone through them.

  15. How Safe Are Color Additives?

    MedlinePlus

    ... Home For Consumers Consumer Updates How Safe are Color Additives? Share Tweet Linkedin Pin it More sharing ... Consumer Updates RSS Feed Download PDF (380 K) Color additives give the red tint to your fruit ...

  16. Show Them You Really Want the Job

    ERIC Educational Resources Information Center

    Perlmutter, David D.

    2012-01-01

    Showing that one really "wants" the job entails more than just really wanting the job. An interview is part Broadway casting call, part intellectual dating game, part personality test, and part, well, job interview. When there are 300 applicants for a position, many of them will "fit" the required (and even the preferred) skills listed in the job…

  17. EFFECT OF REPETITIVE FILM SHOWINGS ON LEARNING.

    ERIC Educational Resources Information Center

    MCTAVISH, C.L.; AND OTHERS

    A DETERMINATION OF THE INCREMENT IN LEARNING ATTRIBUTABLE SOLELY TO ONE, TWO, AND THREE REPETITIONS OF A FILM OVER AND ABOVE A SINGLE SHOWING WAS INVESTIGATED. THE SUBJECTS WERE 319 COLLEGE FRESHMEN WHO WERE DIVIDED INTO FOUR GROUPS AND WHO WERE SHOWN FOUR GENERAL SCIENCE FILMS. EACH GROUP SAW ONE OF THE FILMS ONCE, A SECOND FILM TWICE, A THIRD…

  18. Showing Enantiomorphous Crystals of Tartaric Acid

    ERIC Educational Resources Information Center

    Andrade-Gamboa, Julio

    2007-01-01

    Most of the articles and textbooks that show drawings of enantiomorphous crystals use an inadequate view to appreciate the fact that they are non-superimposable mirror images of one another. If a graphical presentation of crystal chirality is not evident, the main attribute of crystal enantiomorphism can not be recognized by students. The classic…

  19. Laser entertainment and light shows in education

    NASA Astrophysics Data System (ADS)

    Sabaratnam, Andrew T.; Symons, Charles

    2002-05-01

    Laser shows and beam effects have been a source of entertainment since its first public performance May 9, 1969, at Mills College in Oakland, California. Since 1997, the Photonics Center, NgeeAnn Polytechnic, Singapore, has been using laser shows as a teaching tool. Students are able to exhibit their creative skills and learn at the same time how lasers are used in the entertainment industry. Students will acquire a number of skills including handling three- phase power supply, operation of cooling system, and laser alignment. Students also acquire an appreciation of the arts, learning about shapes and contours as they develop graphics for the shows. After holography, laser show animation provides a combination of the arts and technology. This paper aims to briefly describe how a krypton-argon laser, galvanometer scanners, a polychromatic acousto-optic modulator and related electronics are put together to develop a laser projector. The paper also describes how students are trained to make their own laser animation and beam effects with music, and at the same time have an appreciation of the operation of a Class IV laser and the handling of optical components.

  20. 47 CFR 90.505 - Showing required.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Developmental Operation § 90.505 Showing required. (a) Except as provided in...) The actual transmission by radio is essential to proceed beyond the present stage of the program;...

  1. 47 CFR 90.505 - Showing required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Developmental Operation § 90.505 Showing required. (a) Except as provided in...) The actual transmission by radio is essential to proceed beyond the present stage of the program;...

  2. Tilapia show immunization response against Ich

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study compares the immune response of Nile tilapia and red tilapia against parasite Ichthyophthirius multifiliis (Ich) using a cohabitation challenge model. Both Nile and red tilapia showed strong immune response post immunization with live Ich theronts by IP injection or immersion. Blood serum...

  3. A Talk Show from the Past.

    ERIC Educational Resources Information Center

    Gallagher, Arlene F.

    1991-01-01

    Describes a two-day activity in which elementary students examine voting rights, the right to assemble, and women's suffrage. Explains the game, "Assemble, Reassemble," and a student-produced talk show with five students playing the roles of leaders of the women's suffrage movement. Profiles Elizabeth Cady Stanton, Lucretia Mott, Susan…

  4. State Data Show Gains in Reading

    ERIC Educational Resources Information Center

    Manzo, Kathleen Kennedy

    2007-01-01

    Schools taking part in the federal Reading First program are showing significant progress in boosting students' reading fluency and comprehension, according to state-reported data compiled and released by the U.S. Department of Education last week. In releasing for the first time detailed, multiyear data on how Reading First schools are performing…

  5. Self-Organizing Systems Show Apparent Intentionality

    NASA Astrophysics Data System (ADS)

    Tschacher, Wolfganfg; Dauwalder, Jean-Pierre; Haken, Hermann

    Cognitive science is frequently confronted with mind-body issues—is there a way by which the mentalist and the physical approaches to cognition can be integrated? Can the intentional attributes of mind be understood in physical terms? We propose that synergetics, the theory of nonlinear complex systems, offers steps towards a possible solution to this notorious problem. In particular, we claim that an essential property of self-organized pattern formation lies in its functionality, i.e. the ability to respond and adapt 'meaningfully' to environmental constraints. Patterns become functional because they consume the gradients that caused their evolution, and, in addition, they consume them in the most efficient manner. This makes synergetic pattern formation appear 'intentional'. Therefore, we suggest that self-organization phenomena may be considered basic explanations of the adaptive, intentional, and purposive behavior of many complex systems, in particular cognitive systems.

  6. AIDS control: TN may show the way.

    PubMed

    1999-04-19

    The successful experiences of Tamil Nadu (TN) in the control and prevention of HIV/AIDS provides vital clues for the second phase of the Rs. 1,150-crore World Bank-funded national AIDS control program which will begin in July. The National AIDS Control Organization (NACO) is looking at TN for concrete answers in several areas before it composes its guidelines for the second phase. Key areas of focus in the second phase will be high-risk groups, control of STDs, people living with AIDS, communication structures and blood safety. NACO and the funding agency has been impressed by TN¿s method of mobilizing NGOs in the massive anti-HIV/AIDS campaign and its handling of the cost of the care. In addition to the Tamil Nadu State AIDS Control Society (TNSACS), the AIDS Prevention and Control Project of the Voluntary Health Services (supported by USAID) also contributed to the impressive performance of this State.

  7. Detergent Additive for Lubricating Oils,

    DTIC Science & Technology

    The Russian patent pertains to a method of producing additives for lubricating oils . A method is known for producing an antiwear additive for... lubricating oils by processing phenols with phosphorus oxychloride, phosphoric acid esters are obtained. In order to give the additive detergent properties

  8. Object attributes combine additively in visual search

    PubMed Central

    Pramod, R. T.; Arun, S. P.

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in internal details, such as texture; (c) differences in emergent attributes, such as symmetry; and (d) differences in global properties, such as orientation or overall configuration of parts. Our results elucidate an enduring question in object vision by showing that the whole object is not a sum of its parts but a sum of its many attributes. PMID:26967014

  9. Printability of alloys for additive manufacturing

    PubMed Central

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

  10. Printability of alloys for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Mukherjee, T.; Zuback, J. S.; de, A.; Debroy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  11. Printability of alloys for additive manufacturing.

    PubMed

    Mukherjee, T; Zuback, J S; De, A; DebRoy, T

    2016-01-22

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  12. Printability of alloys for additive manufacturing

    SciTech Connect

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-22

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. Here, the findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  13. Printability of alloys for additive manufacturing

    DOE PAGES

    Mukherjee, T.; Zuback, J. S.; De, A.; ...

    2016-01-22

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is usedmore » to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. Here, the findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.« less

  14. 4. VIEW SHOWING NORTHEAST ELEVATION WITH STEEL SASH AND STUCCO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW SHOWING NORTHEAST ELEVATION WITH STEEL SASH AND STUCCO WALL FINISH, LOOKING SOUTH; 1906-1910 ONE-STORY SHED ADDITION WITH ROOF MONITOR IS IN FOREGROUND LEFT - Massachusetts Mills, Cloth Room-Section 15, 95 Bridge Street, Lowell, Middlesex County, MA

  15. 3. OBLIQUE CONTEXTUAL VIEW FROM NORTHWEST, SHOWING OVER HALF OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. OBLIQUE CONTEXTUAL VIEW FROM NORTHWEST, SHOWING OVER HALF OF MILLS HALL MAIN WING, NORTH WALL, ALL OF MILLS HALL NORTH WING WEST WALL, AND ADDITION NORTH AND WEST WALLS. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  16. 5. EXTERIOR OF WEST (REAR) SIDE OF BUILDING 103 SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF WEST (REAR) SIDE OF BUILDING 103 SHOWING TALL RUSTIC STYLE CHIMNEY WITH GABLE FRAME, AND CONCRETE STEPS TO SIDE ENTRY DOOR AT PHOTO RIGHT. CHANGE IN EXTERIOR WALL DELINEATING 1946 BEDROOM ADDITION AND REMODELED WINDOW TO BATHROOM ARE VISIBLE AT PHOTO LEFT. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  17. 5. EXTERIOR OF NORTH END OF BUILDINT 104 SHOWING WOODSIDED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF NORTH END OF BUILDINT 104 SHOWING WOODSIDED BEDROOM ADDITION TO FRONT OF HOUSE, AND SMALL GABLE ROOF OVER FORMER BATHROOM PROJECTION ON NORTH END OF HOUSE. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  18. 3. EXTERIOR OF SOUTH END OF BUILDING 104 SHOWING PAVED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. EXTERIOR OF SOUTH END OF BUILDING 104 SHOWING PAVED VEHICLE ACCESS AND ROCK RETAINING WALL CAPPED BY METAL HANDRAIL. BOTH BASEMENT DOORS (BELOW KITCHEN WINDOWS AT PHOTO CENTER AND BELOW WOODSIDED BEDROOM ADDITION AT PHOTO RIGHT) ARE VISIBLE IN THIS VIEW. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  19. View of building 11050 looking northeast, showing metal sided and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 looking northeast, showing metal sided and roofed addition on east elevation. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Fire Station & Marine Barracks, D Street, at corner of 4th Street, China Lake, Kern County, CA

  20. 167. ARAIII Plot plan as of 1986. Shows most of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    167. ARA-III Plot plan as of 1986. Shows most of original army buildings in addition to location for buildings ARA-621 and ARA-630, which were built in 1969 after army program had been canceled. Date: March 1986. Ineel index code no. 063-0100-00-220-421241. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  1. 4. EXTERIOR OF SOUTH END OF BUILDING 108 SHOWING STORM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. EXTERIOR OF SOUTH END OF BUILDING 108 SHOWING STORM PORCH ADDITION AND WINDOWS ALONG BACK (WEST SIDE) OF HOUSE. NOTE ORIGNAL SHORT CHIMNEY AT CREST OF ROOF. VIEW TO NORTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  2. 5. EXTERIOR OF SOUTH END OF HOUSE SHOWING OPEN DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF SOUTH END OF HOUSE SHOWING OPEN DOOR TO BASEMENT BELOW KITCHEN, ORIGINAL PAIRED WOODFRAMED SLIDING-GLASS WINDOWS ON KITCHEN WALL AND 1LIGHT OVER 1-LIGHT DOUBLE-HUNG WINDOW ON STORM PORCH ADDITION. VIEW TO WEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  3. 5. Photocopy of old exterior photo showing Western Saving Fund ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photocopy of old exterior photo showing Western Saving Fund Society before the addition of ca. 1910 building. Original photo, late 19th century, is at the Philadelphia Free Library, Philadelphia Collection, Print and Picture Department. - Western Saving Fund Society of Philadelphia, 1000-1008 Walnut Street, Philadelphia, Philadelphia County, PA

  4. 1. Photographic copy of engineering drawing showing structure of Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing structure of Test Stand 'B' (4215/E-16), also known as the 'Short Snorter.' California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Structural Addition - Bldg. E-12, Edwards Test Station,' drawing no. E12/1-1, 8 August 1957. - Jet Propulsion Laboratory Edwards Facility, Test Stand B, Edwards Air Force Base, Boron, Kern County, CA

  5. Building No. 391, interior showing roof support structure, horizontal tank ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building No. 391, interior showing roof support structure, horizontal tank on dolly, view facing west - U.S. Naval Base, Pearl Harbor, Marine Railway No. 1 Accessories House & Apprentice Welding School, Additions, Intersection of Avenue B & Sixth Street, Pearl City, Honolulu County, HI

  6. 10. Photocopy of c. 1912 photograph looking N showing original ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Photocopy of c. 1912 photograph looking N showing original c. 1845 brick mill with c. 1897 3-story, wood-frame addition at end; cane shed extends out to the left. - Laurel Valley Sugar Plantation, Sugar Mill, 2 miles South of Thibodaux on State Route 308, Thibodaux, Lafourche Parish, LA

  7. 4. NORTH ELEVATION, SHOWING COLLAPSED MARYLAND NEW RIVER COAL COMPANY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. NORTH ELEVATION, SHOWING COLLAPSED MARYLAND NEW RIVER COAL COMPANY ADDITION, WITH REFUSE CONVEYOR (FOREGROUND), TIMBER REFUSE BIN (LEFT), CONVEYOR HOUSE AND SCREENING ROOM (CENTER), AND COAL STORAGE SILO (RIGHT), LOOKING EAST - Nuttallburg Mine Complex, Tipple, North side of New River, 2.7 miles upstream from Fayette Landing, Lookout, Fayette County, WV

  8. Male genital leiomyomas showing androgen receptor expression.

    PubMed

    Suárez-Peñaranda, José Manuel; Vieites, Begoña; Evgenyeva, Elena; Vázquez-Veiga, Hugo; Forteza, Jeronimo

    2007-12-01

    Genital leiomyoma in men include those superficial leiomyomas arising in the scrotum and the areola. They are unusual neoplasms: few cases have been reported in the literature and they usually escape clinical diagnosis. Three cases of male genital leiomyomas are reported: two in the scrotum and one in the areola. They were all conservatively excised and the behaviour was completely benign in all cases. Histopathological examination showed the typical findings of superficial leiomyomas, with some minor differences between cases arising in the scrotum and those from the areola. Immunohistochemical findings not only confirmed the smooth muscle nature of all cases but also showed unequivocal immunostaining for androgen receptors in the leiomyomas from the scrotum. Immunostaining for androgen receptors in scrotal leiomyomas is, as far as we are aware, a previously unknown characteristic of male genital leiomyomas. This finding supports the role of steroid hormones in the growth of genital leiomyomas, similar to leiomyomas found in other locations.

  9. Kepler Systems That Show Multiple Transiting Objects

    NASA Astrophysics Data System (ADS)

    Steffen, Jason H.; Fabrycky, D. C.; Ford, E. B.; Holman, M. J.; Lissauer, J. J.; Ragozzine, D.; Welsh, W. F.; Kepler Science Team

    2011-01-01

    Exoplanetary systems that have multiple transiting planets provide unique and important insight into the formation, evolution, and dynamics of exoplanetary systems. Kepler has announced the discovery of a confirmed planetary system with multiple transiting planets (Kepler 9, Holman et al. 2010) as well as several candidate planetary systems that show multiple transiting objects (Steffen et al. 2010). Kepler 9 shows deviations from a constant period due to the ongoing dynamical interactions between the confirmed planets. From these transit timing variations (TTV) one can measure the planetary masses from the photometric data alone. The presence of several systems with multiple transiting candidates from the first quarter of data indicate that Kepler should continue to find systems with multiple transiting planets. Such systems will provide important, general information about the histories of planetary systems.

  10. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  11. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  12. Intuitionistic fuzzy stability of a general mixed additive-cubic equation

    NASA Astrophysics Data System (ADS)

    Xu, Tian Zhou; Rassias, John Michael; Xu, Wan Xin

    2010-06-01

    We establish some stability results concerning the general mixed additive-cubic functional equation, f(kx +y)+f(kx -y)=kf(x +y)+kf(x -y)+2f(kx)-2kf(x ),in intuitionistic fuzzy normed spaces. In addition, we show under some suitable conditions that an approximately mixed additive-cubic function can be approximated by a mixed additive and cubic mapping.

  13. Latest European coelacanth shows Gondwanan affinities.

    PubMed

    Cavin, Lionel; Forey, Peter L; Buffetaut, Eric; Tong, Haiyan

    2005-06-22

    The last European fossil occurrence of a coelacanth is from the Mid-Cretaceous of the English Chalk (Turonian, 90 million years ago). Here, we report the discovery of a coelacanth from Late Cretaceous non-marine rocks in southern France. It consists of a left angular bone showing structures that imply close phylogenetic affinities with some extinct Mawsoniidae. The closest relatives are otherwise known from Cretaceous continental deposits of southern continents and suggest that the dispersal of freshwater organisms from Africa to Europe occurred in the Late Cretaceous.

  14. Show Me the Invisible: Visualizing Hidden Content

    PubMed Central

    Geymayer, Thomas; Steinberger, Markus; Lex, Alexander; Streit, Marc; Schmalstieg, Dieter

    2014-01-01

    Content on computer screens is often inaccessible to users because it is hidden, e.g., occluded by other windows, outside the viewport, or overlooked. In search tasks, the efficient retrieval of sought content is important. Current software, however, only provides limited support to visualize hidden occurrences and rarely supports search synchronization crossing application boundaries. To remedy this situation, we introduce two novel visualization methods to guide users to hidden content. Our first method generates awareness for occluded or out-of-viewport content using see-through visualization. For content that is either outside the screen’s viewport or for data sources not opened at all, our second method shows off-screen indicators and an on-demand smart preview. To reduce the chances of overlooking content, we use visual links, i.e., visible edges, to connect the visible content or the visible representations of the hidden content. We show the validity of our methods in a user study, which demonstrates that our technique enables a faster localization of hidden content compared to traditional search functionality and thereby assists users in information retrieval tasks. PMID:25325078

  15. Additive manufacturing of glass for optical applications

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-04-01

    Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

  16. Trials show delayed recurrence in ovarian cancer.

    PubMed

    Bender, Eric

    2013-06-01

    Phase I trials of 2 treatments for recurrent ovarian cancer-a 2-step immunotherapy treatment and an antibody-drug conjugate-demonstrated promising early results in delaying recurrence, in work presented at the American Association for Cancer Research Annual Meeting 2013.

  17. EXPERT SYSTEMS SHOW PROMISE FOR CUSTOMER INQUIRIES

    EPA Science Inventory

    This article describes results of an agreement between the North Penn Water Authority in Lansdale, Pa., and the US Environmental Protection Agency, Drinking Water Research Division, Cincinnati, Ohio, to study use of expert systems technology in a water utility. The threeyear stud...

  18. Developing Multiplicative Thinking from Additive Reasoning

    ERIC Educational Resources Information Center

    Tobias, Jennifer M.; Andreasen, Janet B.

    2013-01-01

    As students progress through elementary school, they encounter mathematics concepts that shift from additive to multiplicative situations (NCTM 2000). When they encounter fraction problems that require multiplicative thinking, they tend to incorrectly extend additive properties from whole numbers (Post et al. 1985). As a result, topics such as …

  19. The Additive Coloration of Alkali Halides

    ERIC Educational Resources Information Center

    Jirgal, G. H.; and others

    1969-01-01

    Describes the construction and use of an inexpensive, vacuum furnace designed to produce F-centers in alkali halide crystals by additive coloration. The method described avoids corrosion or contamination during the coloration process. Examination of the resultant crystals is discussed and several experiments using additively colored crystals are…

  20. Quick Phases of Infantile Nystagmus Show the Saccadic Inhibition Effect

    PubMed Central

    Harrison, James J.; Sumner, Petroc; Dunn, Matt J.; Erichsen, Jonathan T.; Freeman, Tom C. A.

    2015-01-01

    Purpose. Infantile nystagmus (IN) is a pathological, involuntary oscillation of the eyes consisting of slow, drifting eye movements interspersed with rapid reorienting quick phases. The extent to which quick phases of IN are programmed similarly to saccadic eye movements remains unknown. We investigated whether IN quick phases exhibit ‘saccadic inhibition,' a phenomenon typically related to normal targeting saccades, in which the initiation of the eye movement is systematically delayed by task-irrelevant visual distractors. Methods. We recorded eye position from 10 observers with early-onset idiopathic nystagmus while task-irrelevant distractor stimuli were flashed along the top and bottom of a large screen at ±10° eccentricity. The latency distributions of quick phases were measured with respect to these distractor flashes. Two additional participants, one with possible albinism and one with fusion maldevelopment nystagmus syndrome, were also tested. Results. All observers showed that a distractor flash delayed the execution of quick phases that would otherwise have occurred approximately 100 ms later, exactly as in the standard saccadic inhibition effect. The delay did not appear to differ between the two main nystagmus types under investigation (idiopathic IN with unidirectional and bidirectional jerk). Conclusions. The presence of the saccadic inhibition effect in IN quick phases is consistent with the idea that quick phases and saccades share a common programming pathway. This could allow quick phases to take on flexible, goal-directed behavior, at odds with the view that IN quick phases are stereotyped, involuntary eye movements. PMID:25670485

  1. Tomato Fruits Show Wide Phenomic Diversity but Fruit Developmental Genes Show Low Genomic Diversity.

    PubMed

    Mohan, Vijee; Gupta, Soni; Thomas, Sherinmol; Mickey, Hanjabam; Charakana, Chaitanya; Chauhan, Vineeta Singh; Sharma, Kapil; Kumar, Rakesh; Tyagi, Kamal; Sarma, Supriya; Gupta, Suresh Kumar; Kilambi, Himabindu Vasuki; Nongmaithem, Sapana; Kumari, Alka; Gupta, Prateek; Sreelakshmi, Yellamaraju; Sharma, Rameshwar

    2016-01-01

    Domestication of tomato has resulted in large diversity in fruit phenotypes. An intensive phenotyping of 127 tomato accessions from 20 countries revealed extensive morphological diversity in fruit traits. The diversity in fruit traits clustered the accessions into nine classes and identified certain promising lines having desirable traits pertaining to total soluble salts (TSS), carotenoids, ripening index, weight and shape. Factor analysis of the morphometric data from Tomato Analyzer showed that the fruit shape is a complex trait shared by several factors. The 100% variance between round and flat fruit shapes was explained by one discriminant function having a canonical correlation of 0.874 by stepwise discriminant analysis. A set of 10 genes (ACS2, COP1, CYC-B, RIN, MSH2, NAC-NOR, PHOT1, PHYA, PHYB and PSY1) involved in various plant developmental processes were screened for SNP polymorphism by EcoTILLING. The genetic diversity in these genes revealed a total of 36 non-synonymous and 18 synonymous changes leading to the identification of 28 haplotypes. The average frequency of polymorphism across the genes was 0.038/Kb. Significant negative Tajima'D statistic in two of the genes, ACS2 and PHOT1 indicated the presence of rare alleles in low frequency. Our study indicates that while there is low polymorphic diversity in the genes regulating plant development, the population shows wider phenotype diversity. Nonetheless, morphological and genetic diversity of the present collection can be further exploited as potential resources in future.

  2. Tomato Fruits Show Wide Phenomic Diversity but Fruit Developmental Genes Show Low Genomic Diversity

    PubMed Central

    Mohan, Vijee; Gupta, Soni; Thomas, Sherinmol; Mickey, Hanjabam; Charakana, Chaitanya; Chauhan, Vineeta Singh; Sharma, Kapil; Kumar, Rakesh; Tyagi, Kamal; Sarma, Supriya; Gupta, Suresh Kumar; Kilambi, Himabindu Vasuki; Nongmaithem, Sapana; Kumari, Alka; Gupta, Prateek; Sreelakshmi, Yellamaraju; Sharma, Rameshwar

    2016-01-01

    Domestication of tomato has resulted in large diversity in fruit phenotypes. An intensive phenotyping of 127 tomato accessions from 20 countries revealed extensive morphological diversity in fruit traits. The diversity in fruit traits clustered the accessions into nine classes and identified certain promising lines having desirable traits pertaining to total soluble salts (TSS), carotenoids, ripening index, weight and shape. Factor analysis of the morphometric data from Tomato Analyzer showed that the fruit shape is a complex trait shared by several factors. The 100% variance between round and flat fruit shapes was explained by one discriminant function having a canonical correlation of 0.874 by stepwise discriminant analysis. A set of 10 genes (ACS2, COP1, CYC-B, RIN, MSH2, NAC-NOR, PHOT1, PHYA, PHYB and PSY1) involved in various plant developmental processes were screened for SNP polymorphism by EcoTILLING. The genetic diversity in these genes revealed a total of 36 non-synonymous and 18 synonymous changes leading to the identification of 28 haplotypes. The average frequency of polymorphism across the genes was 0.038/Kb. Significant negative Tajima’D statistic in two of the genes, ACS2 and PHOT1 indicated the presence of rare alleles in low frequency. Our study indicates that while there is low polymorphic diversity in the genes regulating plant development, the population shows wider phenotype diversity. Nonetheless, morphological and genetic diversity of the present collection can be further exploited as potential resources in future. PMID:27077652

  3. Surveys show support for green 'activities'.

    PubMed

    Baillie, Jonathan

    2012-03-01

    Two independently conducted surveys on sustainability - one into the 'views and values' of NHS 'leaders', and the other questioning the public about the importance of the 'green agenda' in the NHS, and their opinions on how the service might most effectively reduce its carbon footprint, form the basis of Sustainability in the NHS: Health Check 2012, a new NHS Sustainable Development Unit (NHS SDU) publication. As HEJ editor Jonathan Baillie reports, the new document also presents updated data on the 'size' of the carbon footprint of the NHS in England, showing that, although good work by a number of Trusts in the past two years has seen healthcare-generated carbon emissions start to 'level off', the biggest contributors have been the current health service spending review, and the increased national availability of renewable energy.

  4. Star Shows It Has The Right Stuff

    NASA Astrophysics Data System (ADS)

    2004-01-01

    Astronomers have used an observation by NASA's Chandra X-ray Observatory to make the best case yet that a star can be engulfed by its companion star and survive. This discovery will help astronomers better understand how closely coupled stars, and perhaps even stars and planets, evolve when one of the stars expands enormously in its red giant phase. The binary star system known as V471 Tauri comprises a white dwarf star (the primary) in a close orbit -- one thirtieth of the distance between Mercury and the Sun -- with a normal Sun-like star (the secondary). Chandra's data showed that the hot upper atmosphere of the secondary star has a deficit of carbon atoms relative to nitrogen atoms. "This deficit of carbon atoms is the first clear observational evidence that the normal star was engulfed by its companion in the past," according to Jeremy Drake of the Smithsonian Astrophysical Observatory in Cambridge, MA, who coauthored an article on V471 in The Astrophysical Journal Letters with Marek Sarna of the N. Copernicus Astronomical Center in Poland. The white dwarf star was once a star several times as massive as the Sun. Nuclear fusion reactions in the core of such a star convert carbon into nitrogen over a period of about a billion years. When the fuel in the core of the star is exhausted, the core collapses, triggering more energetic nuclear reactions that cause the star to expand and transform into a red giant before eventually collapsing to become a white dwarf. The carbon-poor material in the core of the red giant is mixed with outer part of the star, so its atmosphere shows a deficit of carbon, as compared with Sun-like stars. The X-ray spectra of a red giant star (top panel) and a Sun-like star (bottom panel) show the large difference in the peaks due to carbon atoms in the two stars. Theoretical calculations indicate that a red giant in a binary system can completely envelop its companion star and dramatically affect its evolution. During this common envelope

  5. Microbiological and environmental issues in show caves.

    PubMed

    Saiz-Jimenez, Cesareo

    2012-07-01

    Cultural tourism expanded in the last half of the twentieth century, and the interest of visitors has come to include caves containing archaeological remains. Some show caves attracted mass tourism, and economical interests prevailed over conservation, which led to a deterioration of the subterranean environment and the rock art. The presence and the role of microorganisms in caves is a topic that is often ignored in cave management. Knowledge of the colonisation patterns, the dispersion mechanisms, and the effect on human health and, when present, over rock art paintings of these microorganisms is of the utmost importance. In this review the most recent advances in the study of microorganisms in caves are presented, together with the environmental implications of the findings.

  6. Astronomers Make "Movie" of Radio Images Showing Supernova Explosion

    NASA Astrophysics Data System (ADS)

    1995-11-01

    - dispersed radio telescopes has existed for only a few years. Supernova 1993J was the first one that was both close enough and had radio emission strong enough to enable scientists to make such detailed images. While the circular images show that the explosion debris is expanding symmetrically, the radio emission is stronger on one side of the shell. The explanation for this is unclear. Some astronomers have suggested that the stronger emission could result from the debris interacting with a companion star orbiting the one that exploded. The researchers believe that their sequence of images, with the stronger emission persisting for months after the explosion, makes the companion-star hypothesis unlikely. Previous radio observations of older and larger supernova shells have revealed protrusions within the shell. The latest images, however, show no such protrusions. This places limits on theories of how the protrusions form. In addition, the new images show that Supernova 1993J's debris shell has shown no signs yet of slowing due to interaction with material surrounding it. The material from the star's explosion is moving at nearly 10,000 miles per second, according to the researchers. At that speed, the material would travel the distance from the Earth to Saturn in one day. When the angular expansion rate of the supernova debris measured by the radio observatories is combined with the expansion speed of the same debris, measured by optical astronomers, it is possible to obtain an accurate value of the distance to M81. The value determined, 11 million light-years, is similar to that obtained by other, independent, means. This is important, as astronomers continue to seek more accurate distances to celestial objects to better gauge the actual size of the Universe. In addition to the VLA and several antennas of the VLBA, the scientists used German and Italian radio telescopes, as well as NASA facilities in California and Spain.

  7. Mesenchymal stem cells show radioresistance in vivo.

    PubMed

    Singh, Sarvpreet; Kloss, Frank R; Brunauer, Regina; Schimke, Magdalena; Jamnig, Angelika; Greiderer-Kleinlercher, Brigitte; Klima, Günter; Rentenberger, Julia; Auberger, Thomas; Hächl, Oliver; Rasse, Michael; Gassner, Robert; Lepperdinger, Günter

    2012-04-01

    Irradiation impacts on the viability and differentiation capacity of tissue-borne mesenchymal stem cells (MSC), which play a pivotal role in bone regeneration. As a consequence of radiotherapy, bones may develop osteoradionecrosis. When irradiating human bone-derived MSC in vitro with increasing doses, the cells' self-renewal capabilities were greatly reduced. Mitotically stalled cells were still capable of differentiating into osteoblasts and pre-adipocytes. As a large animal model comparable to the clinical situation, pig mandibles were subjected to fractionized radiation of 2 χ 9 Gy within 1 week. This treatment mimics that of a standardized clinical treatment regimen of head and neck cancer patients irradiated 30 χ 2 Gy. In the pig model, fractures which had been irradiated, showed delayed osseous healing. When isolating MSC at different time points post-irradiation, no significant changes regarding proliferation capacity and osteogenic differentiation potential became apparent. Therefore, pig mandibles were irradiated with a single dose of either 9 or 18 Gy in vivo, and MSC were isolated immediately afterwards. No significant differences between the untreated and 9 Gy irradiated bone with respect to proliferation and osteogenic differentiation were unveiled. Yet, cells isolated from 18 Gy irradiated specimens exhibited a reduced osteogenic differentiation capacity, and during the first 2 weeks proliferation rates were greatly diminished. Thereafter, cells recovered and showed normal proliferation behaviour. These findings imply that MSC can effectively cope with irradiation up to high doses in vivo. This finding should thus be implemented in future therapeutic concepts to protect regenerating tissue from radiation consequences.

  8. Electricity show and related educational programming. Final report

    SciTech Connect

    1997-03-19

    The on-site version of Balance of Power reached a total audience of 21,331 between November 10, 1994 and January 31, 1996; in addition, the Physics on Wheels van offered exhibits and programs to an additional 30,000 students in the 1995-1996 school year. The program provided a groundbreaking new approach to informal science education, combining a dynamic demonstration with an intensely interactive game show. Between the on-site programming and the Physics on Wheels van programs, 51,331 students were impacted by the activities, exhibits and energy-conservation message of Balance of Power.

  9. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-09

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  10. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  11. VLA Shows "Boiling" in Atmosphere of Betelgeuse

    NASA Astrophysics Data System (ADS)

    1998-04-01

    A team of astronomers says that observations with the National Science Foundation's Very Large Array (VLA) radio telescope show that a neighboring bloated star has giant convective plumes propelling gas from its surface (photosphere) up into the star's atmosphere. This new information contradicts long-held ideas that such stellar atmospheres are more uniform, and may resolve questions about how the star's atmosphere attains its enormous size as well as how dust and gas is driven away from the star. Jeremy Lim of the Academia Sinica Institute of Astronomy & Astrophysics in Taiwan; Chris Carilli, Anthony Beasley, and Ralph Marson of the National Radio Astronomy Observatory (NRAO) in Socorro, NM; and Stephen White of the University of Maryland studied the red-supergiant star Betelgeuse, about 430 light-years away in the constellation Orion. They reported their findings in the April 9 issue of the scientific journal Nature. "These radio-telescope images confirm that Betelgeuse -- already more than 600 times larger than our Sun -- has a dense atmosphere that extends to many times larger still than the star itself," said Lim. "The highest-resolution image shows the star's atmosphere to have a remarkably complex structure." "To our surprise," added White, "the images also show that most of the gas in the atmosphere is only about as hot as that on the surface. Previously, all of it was thought to be very much hotter." The astronomers used the VLA to make images of Betelgeuse at a variety of radio frequencies. The series of radio observations measured the temperature of the star's atmosphere at different heights. Previous observations with the Hubble Space Telescope (HST) at ultraviolet wavelengths showed that the star's atmosphere contains very hot gas at about twice the surface temperature. The VLA images showed that there also is lower-temperature gas throughout the atmosphere. This gas is near the surface temperature at low heights and decreases in temperature

  12. Dissociated brain organization for single-digit addition and multiplication.

    PubMed

    Zhou, Xinlin; Chen, Chuansheng; Zang, Yufeng; Dong, Qi; Chen, Chunhui; Qiao, Sibing; Gong, Qiyong

    2007-04-01

    This study compared the patterns of brain activation elicited by single-digit addition and multiplication problems. 20 Chinese undergraduates were asked to verify whether arithmetic equations were true or false during functional magnetic resonance imaging. Results showed that both addition and multiplication were supported by a broad neural system that involved regions within SMA, precentral gyrus, intraparietal sulcus, occipital gyri, superior temporal gyrus, and middle frontal gyrus, as well as some subcortical structures. Nevertheless, addition problems elicited more activation in the intraparietal sulcus and middle occipital gyri at the right hemisphere, and superior occipital gyri at both hemispheres, whereas multiplication had more activation in precentral gyrus, supplementary motor areas, and posterior and anterior superior temporal gyrus at the left hemisphere. This pattern of dissociated activation supports our hypothesis that addition has greater reliance on visuospatial processing and multiplication on verbal processing.

  13. Assessment of Gasoline Additive Containing Ditert-butoxypropanol

    SciTech Connect

    West, Brian H.; Connatser, Raynella M.; Lewis, Samuel Arthur

    2016-04-01

    The Fuels, Engines, and Emissions Research Center completed analysis and testing of the CPS Powershot gasoline additive under the auspices of the Department of Energy’s Technical Assistance for US Small Businesses in Vehicle Technologies. Gas chromatography-mass spectrometry (GC-MS) was used to quantify the makeup of the additive, finding a predominance of 2,3-Ditert-Butoxypropanol, also known as Glyceryl Di-Tert-Butyl Ether (GTBE). Blends of the additive at 2 and 4 volume percent were subjected to a number of standard ASTM tests, including Research Octane Number, Motor Octane Number, distillation, and vapor pressure. Results show a high boiling range and low vapor pressure for the additive, and a very modest octane boosting effect in gasoline with and without ethanol.

  14. Cold-fusion television show angers APS

    NASA Astrophysics Data System (ADS)

    Cartwright, Jon

    2009-06-01

    Cold fusion has been controversial since its inception on 23 March 1989, when chemists Martin Fleischmann and Stanley Pons at the University of Utah in the US announced that they had achieved a sustained nuclear-fusion reaction at room temperature. Two decades on, a US television documentary about the field has stirred up fresh debate after it linked the American Physical Society (APS) to an evaluation of some cold-fusion results by Robert Duncan, a physicist and vice chancellor of the University of Missouri.

  15. First K2 mutiplanatary system showing TTVs

    NASA Astrophysics Data System (ADS)

    Barros, Susana C. C.

    2015-08-01

    In traditional transit timing variations (TTVs) analysis of multi-planetary systems, the individual TTVs are first derived from transit fitting and later modeled using n-body dynamic simulations to constrain planetary masses.I will show that fitting simultaneously the transit light curves with the system dynamics (photo-dynamical model) increases the precision of the TTV measurements and helps constrain the system architecture. I will exemplify the advantages of applying this photo-dynamical model to a multi-planetary system found in K2 data very close to 3:2 mean motion resonance. In this case the period of the larger TTV variations (libration period) is much longer (~1.5 years) than the duration of the K2 observations (~80 days). However, our method allows to detect the short period TTVs produced by the orbital conjunctions between the planets that in turn permits to uniquely characterize the system. Therefore, our method can be used to constrain the masses of near-resonant systems even when the full libration curve is not observed and hence will help understanding evolution of these interesting systems.

  16. Serotonin transporter knockout rats show improved strategy set-shifting and reduced latent inhibition.

    PubMed

    Nonkes, Lourens J P; van de Vondervoort, Ilse I G M; de Leeuw, Mark J C; Wijlaars, Linda P; Maes, Joseph H R; Homberg, Judith R

    2012-04-13

    Behavioral flexibility is a cognitive process depending on prefrontal areas allowing adaptive responses to environmental changes. Serotonin transporter knockout (5-HTT(-/-)) rodents show improved reversal learning in addition to orbitofrontal cortex changes. Another form of behavioral flexibility, extradimensional strategy set-shifting (EDSS), heavily depends on the medial prefrontal cortex. This region shows functional changes in 5-HTT(-/-) rodents as well. Here we subjected 5-HTT(-/-) rats and their wild-type counterparts to an EDSS paradigm and a supplementary latent inhibition task. Results indicate that 5-HTT(-/-) rats also show improved EDSS, and indicate that reduced latent inhibition may contribute as an underlying mechanism.

  17. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  18. Additive Effects on Asymmetric Catalysis.

    PubMed

    Hong, Liang; Sun, Wangsheng; Yang, Dongxu; Li, Guofeng; Wang, Rui

    2016-03-23

    This review highlights a number of additives that can be used to make asymmetric reactions perfect. Without changing other reaction conditions, simply adding additives can lead to improved asymmetric catalysis, such as reduced reaction time, improved yield, or/and increased selectivity.

  19. Computed tomography characterisation of additive manufacturing materials.

    PubMed

    Bibb, Richard; Thompson, Darren; Winder, John

    2011-06-01

    Additive manufacturing, covering processes frequently referred to as rapid prototyping and rapid manufacturing, provides new opportunities in the manufacture of highly complex and custom-fitting medical devices and products. Whilst many medical applications of AM have been explored and physical properties of the resulting parts have been studied, the characterisation of AM materials in computed tomography has not been explored. The aim of this study was to determine the CT number of commonly used AM materials. There are many potential applications of the information resulting from this study in the design and manufacture of wearable medical devices, implants, prostheses and medical imaging test phantoms. A selection of 19 AM material samples were CT scanned and the resultant images analysed to ascertain the materials' CT number and appearance in the images. It was found that some AM materials have CT numbers very similar to human tissues, FDM, SLA and SLS produce samples that appear uniform on CT images and that 3D printed materials show a variation in internal structure.

  20. Anaerobic sludge digestion with a biocatalytic additive

    SciTech Connect

    Ghosh, S.; Henry, M.P.; Fedde, P.A.

    1982-01-01

    The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without the additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.

  1. Lockheed Electra - animation showing air turbulence detection

    NASA Technical Reports Server (NTRS)

    1999-01-01

    On Mar. 24, 1998, an L-188 Electra aircraft owned by the National Science Foundation, Arlington, Virginia, and operated by the National Center for Atmospheric Research, Boulder, Colorado, flew near Boulder with an Airborne Coherent LiDAR (Light Detection and Ranging) for Advanced In-flight Measurement. This aircraft was on its first flight to test its ability to detect previously invisible forms of clear air turbulence. Coherent Technologies Inc., Lafayette, Colorado, built the LiDAR device for the NASA Dryden Flight Research Center, Edwards, California. NASA Dryden participated in the effort as part of the NASA Aviation Safety Program, for which the lead center was Langley Research Center, Hampton, Virginia. Results of the test indicated that the device did successfully detect the clear air turbulence. Computer animation of the clear air turbulence (CAT) detection system known as the 'Airborne Coherent LiDAR for Advanced In-flight Measurement' was tested aboard the National Science Foundation L-188 Lockheed Electra.

  2. HUBBLE SHOWS EXPANSION OF ETA CARINAE DEBRIS

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The furious expansion of a huge, billowing pair of gas and dust clouds are captured in this NASA Hubble Space Telescope comparison image of the supermassive star Eta Carinae. To create the picture, astronomers aligned and subtracted two images of Eta Carinae taken 17 months apart (April 1994, September 1995). Black represents where the material was located in the older image, and white represents the more recent location. (The light and dark streaks that make an 'X' pattern are instrumental artifacts caused by the extreme brightness of the central star. The bright white region at the center of the image results from the star and its immediate surroundings being 'saturated' in one of the images.)Photo Credit: Jon Morse (University of Colorado), Kris Davidson (University of Minnesota), and NASA Image files in GIF and JPEG format and captions may be accessed on Internet via anonymous ftp from oposite.stsci.edu in /pubinfo.

  3. The Probabilistic Admissible Region with Additional Constraints

    NASA Astrophysics Data System (ADS)

    Roscoe, C.; Hussein, I.; Wilkins, M.; Schumacher, P.

    The admissible region, in the space surveillance field, is defined as the set of physically acceptable orbits (e.g., orbits with negative energies) consistent with one or more observations of a space object. Given additional constraints on orbital semimajor axis, eccentricity, etc., the admissible region can be constrained, resulting in the constrained admissible region (CAR). Based on known statistics of the measurement process, one can replace hard constraints with a probabilistic representation of the admissible region. This results in the probabilistic admissible region (PAR), which can be used for orbit initiation in Bayesian tracking and prioritization of tracks in a multiple hypothesis tracking framework. The PAR concept was introduced by the authors at the 2014 AMOS conference. In that paper, a Monte Carlo approach was used to show how to construct the PAR in the range/range-rate space based on known statistics of the measurement, semimajor axis, and eccentricity. An expectation-maximization algorithm was proposed to convert the particle cloud into a Gaussian Mixture Model (GMM) representation of the PAR. This GMM can be used to initialize a Bayesian filter. The PAR was found to be significantly non-uniform, invalidating an assumption frequently made in CAR-based filtering approaches. Using the GMM or particle cloud representations of the PAR, orbits can be prioritized for propagation in a multiple hypothesis tracking (MHT) framework. In this paper, the authors focus on expanding the PAR methodology to allow additional constraints, such as a constraint on perigee altitude, to be modeled in the PAR. This requires re-expressing the joint probability density function for the attributable vector as well as the (constrained) orbital parameters and range and range-rate. The final PAR is derived by accounting for any interdependencies between the parameters. Noting that the concepts presented are general and can be applied to any measurement scenario, the idea

  4. AD-1 multiple exposure showing wing sweep

    NASA Technical Reports Server (NTRS)

    1980-01-01

    This photograph is a multiple exposure showing the AD-1 aircraft with its wing swept at different angles between zero and 60 degrees. The Ames-Dryden-1 (AD-1) aircraft was designed to investigate the concept of an oblique (pivoting) wing. The wing could be rotated on its center pivot, so that it could be set at its most efficient angle for the speed at which the aircraft was flying. NASA Ames Research Center Aeronautical Engineer Robert T. Jones conceived the idea of an oblique wing. His wind tunnel studies at Ames (Moffett Field, CA) indicated that an oblique wing design on a supersonic transport might achieve twice the fuel economy of an aircraft with conventional wings. The oblique wing on the AD-1 pivoted about the fuselage, remaining perpendicular to it during slow flight and rotating to angles of up to 60 degrees as aircraft speed increased. Analytical and wind tunnel studiesthat Jones conducted at Ames indicated that a transport-sized oblique-wing aircraft flying at speeds of up to Mach 1.4 (1.4 times the speed of sound) would have substantially better aerodynamic performance than aircraft with conventional wings. The AD-1 structure allowed the project to complete all of its technical objectives. The type of low-speed, low-cost vehicle - as expected - exhibited aeroelastic and pitch-roll-coupling effects that contributed to poor handling at sweep angles above 45 degrees. The fiberglass structure limited the wing stiffness that would have improved the handling qualities. Thus, after completion of the AD-1 project, there was still a need for a transonic oblique-wing research aircraft to assess the effects of compressibility, evaluate a more representative structure, and analyze flight performance at transonic speeds (those on either side of the speed of sound). The aircraft was delivered to the Dryden Flight Research Center, Edwards, CA, in March 1979 and its first flight was on December 21, 1979. Piloting the aircraft on that flight, as well as on its last

  5. Cassini UVIS Observations Show Active Saturn's Rings

    NASA Astrophysics Data System (ADS)

    Esposito, L.; Colwell, J. E.; UVIS Team

    2004-12-01

    The Cassini Ultraviolet Imaging Spectrograph (UVIS) is part of the remote sensing payload of the NASA/ESA Cassini spacecraft. This spectrograph includes channels for extreme UV and far UV spectroscopic imaging, high speed photometry of stellar occultations, solar EUV occultation, and a hydrogen/deuterium absorption cell. We report our initial results from UVIS observations of Saturn's rings. Dynamic interactions between neutrals, ions, rings, moons and meteoroids produce a highly structured and time variable Saturn system Oxygen in the Saturn system dominates the magnetosphere. Observed fluctuations indicate close interactions with plasma sources. Stochastic events in the E ring may be the ultimate source. The spectral signature of water ice is seen on Phoebe and in Saturn's rings. Water ice is mixed non-uniformly with darker constituents. The high structure of the UV ring reflectance argues that collisional transport dominates ballistic transport in darkening the rings. Our preliminary results support the idea that rings are recycled fragments of moons: the current processes are more important than history and initial conditions. The spectra along the UVIS SOI radial scan indicate varying amounts of water ice. In the A ring, the ice fraction increases outward to a maximum at the outer edge. This large-scale variation is consistent with initially pure ice that has suffered meteoritic bombardment over the age of the Solar system (Cuzzi and Estrada 1998). We also see variations over scales of 1000 - 3000 km, which cannot be explained by this mechanism. Ballistic transport of spectrally neutral extrinsic pollutants from meteoroids striking the rings has a typical throw distance of 6000 km (Durisen et al 1989), too long to explain this finer structure. We propose a class of smaller renewal events, in which a small moon residing within the rings is shattered by an external impactor (Colwell and Esposito 1993, Barbara and Esposito 2002, Esposito and Colwell 2003). The

  6. STD studies show spermicides protect against Chlamydia.

    PubMed

    1986-01-01

    Evidence which suggests that spermicides provide protection against sexually transmitted diseases (STDs) is accumulating. Laboratory tests have repeatedly demonstrated that spermicides are capable of killing the bacteria responsible for several types of STDs, as well as the virus responsible for acquired immunodeficiency syndrome. Recently, studies conducted in Bangkok, Thailand and in New York City suggest that these protective effects are not confined to the laboratory but that they also occur among women who use spermicides in the real world. In the New York City study, Family Health International (FHI), using data collected by Planned Parenthood of New York City, compared STD prevalence rates for women using different contraceptive methods. Women who used spermicides, in comparison with women who used oral contraceptives (OCs), were 20% less likely to have contracted a STD, 30% less likely to have gonorrhea, and 60% less likely to have chlamydia. In the Thai study, conducted jointly by the FHI and the Ministry of Health, women at high risk of STDs were allocated either to a group which was instructed to use a vaginal sponge impregnated with nonoxynol-9 during intercourse or to a control group which received no vaginal contraceptives. All the women were either sterilized or using OCs, IUDs, or injectable contraceptives. Preliminary results suggest that the women who used the vaginal sponges were significantly less likely to contract chlamydia than the control group. In regard to the incidence of gonorrhea, no differences between the 2 groups was detected. In the Thai study methodological problems forced the researchers to redesign the study. In accordance with the new design, the women in the 2 groups will be crossed over after 6 weeks. This will allow the researchers to examine the effect of using or not using a vaginal spermicide on specific individuals. The findings of the 2 studies have special relevance given the increasing prevalence of STDs in many

  7. Molars and incisors: show your microarray IDs

    PubMed Central

    2013-01-01

    Background One of the key questions in developmental biology is how, from a relatively small number of conserved signaling pathways, is it possible to generate organs displaying a wide range of shapes, tissue organization, and function. The dentition and its distinct specific tooth types represent a valuable system to address the issues of differential molecular signatures. To identify such signatures, we performed a comparative transcriptomic analysis of developing murine lower incisors, mandibular molars and maxillary molars at the developmental cap stage (E14.5). Results 231 genes were identified as being differentially expressed between mandibular incisors and molars, with a fold change higher than 2 and a false discovery rate lower than 0.1, whereas only 96 genes were discovered as being differentially expressed between mandibular and maxillary molars. Numerous genes belonging to specific signaling pathways (the Hedgehog, Notch, Wnt, FGF, TGFβ/BMP, and retinoic acid pathways), and/or to the homeobox gene superfamily, were also uncovered when a less stringent fold change threshold was used. Differential expressions for 10 out of 12 (mandibular incisors versus molars) and 9 out of 10 selected genes were confirmed by quantitative reverse transcription-PCR (qRT-PCR). A bioinformatics tool (Ingenuity Pathway Analysis) used to analyze biological functions and pathways on the group of incisor versus molar differentially expressed genes revealed that 143 genes belonged to 9 networks with intermolecular connections. Networks with the highest significance scores were centered on the TNF/NFκB complex and the ERK1/2 kinases. Two networks ERK1/2 kinases and tretinoin were involved in differential molar morphogenesis. Conclusion These data allowed us to build several regulatory networks that may distinguish incisor versus molar identity, and may be useful for further investigations of these tooth-specific ontogenetic programs. These programs may be dysregulated in

  8. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  9. SPERTI plot plan, showing reactor and control areas after 1956 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SPERT-I plot plan, showing reactor and control areas after 1956 addition to PER-601. Includes reactor-area buildings PER-605, -606, and -607; Terminal Building (PER-604), and control-area buildings PER-601, -602, -603 along with associated parking areas and fencing. Vicinity map shows relationship of SPERT-I to SPERT-II, SPERT-III, central facilities area (at west end of E. Portland Avenue) and Highways 20 and 26. Idaho Operations Office PER-103-IDO-1. Date: December 1955. INEEL index no. 760-0103-396-109112 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

  10. Addition-type polyimides from solutions of monomeric reactants.

    NASA Technical Reports Server (NTRS)

    Delvigs, P.; Serafini, T. T.; Lightsey, G. R.

    1972-01-01

    The monomeric reactants approach was used to fabricate addition-type polyimide/graphite fiber composites with improved mechanical properties and thermal stability characteristics over those of composites derived from addition-type amide acid prepolymers. A screening study of 24 different monomer combinations was performed. The results of a more extensive investigation of a selected number of monomer combinations showed that the combination providing the best thermomechanical properties was 5-norbornene-2,3-dicarboxylic acid monomethyl ester/4,4'-methylenedianiline/3,3'4,4'-benzophenonetetracarboxylic acid dimethyl ester at a molar ratio of 2/3.09/2.09.

  11. Addition-type polyimides from solutions of monomeric reactants

    NASA Technical Reports Server (NTRS)

    Delvigs, P.; Serafini, T. T.; Lightsey, G. R.

    1972-01-01

    The monomeric reactants approach was used to fabricate addition-type polyimide/graphite fiber composites with improved mechanical properties and thermal stability characteristics over those of composites derived from addition-type amide acid prepolymers. A screening study of 24 different monomer combinations was performed. The results of a more extensive investigation of a selected number of monomer combinations showed that the combination providing the best thermomechanical properties was 5-norbornene-2,3-dicarboxylic acid monomethyl ester/4,4'-methylenedianiline/3,3'4,4'-benzophenone tetracarboxylic acid dimethyl ester at a molar ratio of 2/3.09/2.09.

  12. Addition-type polyimides from solutions of monomeric reactants

    NASA Technical Reports Server (NTRS)

    Delvigs, P.; Serafini, T. T.; Lightsey, G. R.

    1972-01-01

    The monomeric reactants approach was used to fabricate addition-type polyimide/graphite fiber composites with improved mechanical properties and thermal stability characteristics over those of composites derived from addition-type amide acid prepolymers. A screening study of 24 different monomer combinations was performed. The results of a more extensive investigation of a selected number of monomer combinations showed that the combination providing the best thermomechanical properties was 5-norbornene-2.3-dicarboxylic acid monomethyl ester/4,4(')-methylenedianiline/3,3(')4,4(')-benzophenonetetracarboxylic acid dimethyl ester at a molar ratio of 2/3.09/2.09.

  13. Cryosurgery as Additional Treatment in Tenosynovial Giant Cell Tumors

    PubMed Central

    Scholte, A.; van der Geest, I. C. M.; Hannink, G.; Schreuder, H. W. B.

    2016-01-01

    Introduction. Tenosynovial giant cell tumors (TGCT) emerge from the synovium and can behave aggressively. Surgical resection is the standard treatment. However, up to half of the patients with diffuse type show recurrences. Several additional treatments have been applied to reduce recurrences; none of these treatments was proven to be superior to surgical resection solely. This article describes the results of additional cryosurgery to surgical resection. Materials and Methods. We retrospectively evaluated 141 TGCT patients, between 1999 and 2007. Twelve patients had additional cryosurgery. The knee (n = 8), hip (n = 2), ankle (n = 1), and elbow (n = 1) were affected. Primary outcome variables were treatment indications, recurrences, and complications. Results. Indications for additional cryosurgery were extended disease, bone involvement, and locations that are difficult to surgically get disease-free such as cruciate ligaments. Five patients had recurrent disease, all of which had prior treatments. None of the primary treated patients had recurrent disease. One patient had a deep infection. Discussion. Cryosurgery may serve as an additional treatment for diffuse TCGT in selected cases. However, because of the small number of patients and the heterogeneous group we could not prove an advantage of additional cryosurgery over surgical resection only. Cryosurgery should be considered for further evaluation in a prospective study. If there is any effect it would be helpful, especially in patients with multiple TGCT recurrences. PMID:28115910

  14. Adverse reactions to drug additives.

    PubMed

    Simon, R A

    1984-10-01

    There is a long list of additives used by the pharmaceutical industry. Most of the agents used have not been implicated in hypersensitivity reactions. Among those that have, only reactions to parabens and sulfites have been well established. Parabens have been shown to be responsible for rare immunoglobulin E-mediated reactions that occur after the use of local anesthetics. Sulfites, which are present in many drugs, including agents commonly used to treat asthma, have been shown to provoke severe asthmatic attacks in sensitive individuals. Recent studies indicate that additives do not play a significant role in "hyperactivity." The role of additives in urticaria is not well established and therefore the incidence of adverse reactions in this patient population is simply not known. In double-blind, placebo-controlled studies, reactions to tartrazine or additives other than sulfites, if they occur at all, are indeed quite rare for the asthmatic population, even for the aspirin-sensitive subpopulation.

  15. Radiation Therapy: Additional Treatment Options

    MedlinePlus

    ... SNIPEND SNIPSTART Find A Radiation Oncologist SNIPEND Additional Treatment Options SNIPSTART A A SNIPEND Chemotherapy Medicines prescribed ... such as antibodies, to fight cancer. Novel Targeted Therapies Cancer doctors now know much more about how ...

  16. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  17. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  18. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  19. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  20. Additional historical solid rocket motor burns

    NASA Astrophysics Data System (ADS)

    Wiedemann, Carsten; Homeister, Maren; Oswald, Michael; Stabroth, Sebastian; Klinkrad, Heiner; Vörsmann, Peter

    2009-06-01

    The use of orbital solid rocket motors (SRM) is responsible for the release of a high number of slag and Al 2O 3 dust particles which contribute to the space debris environment. This contribution has been modeled for the ESA space debris model MASTER (Meteoroid and Space Debris Terrestrial Environment Reference). The current model version, MASTER-2005, is based on the simulation of 1076 orbital SRM firings which mainly contributed to the long-term debris environment. SRM firings on very low earth orbits which produce only short living particles are not considered. A comparison of the modeled flux with impact data from returned surfaces shows that the shape and quantity of the modeled SRM dust distribution matches that of recent Hubble Space Telescope (HST) solar array measurements very well. However, the absolute flux level for dust is under-predicted for some of the analyzed Long Duration Exposure Facility (LDEF) surfaces. This indicates that some past SRM firings are not included in the current event database. Thus it is necessary to investigate, if additional historical SRM burns, like the retro-burn of low orbiting re-entry capsules, may be responsible for these dust impacts. The most suitable candidates for these firings are the large number of SRM retro-burns of return capsules. This paper focuses on the SRM retro-burns of Russian photoreconnaissance satellites, which were used in high numbers during the time of the LDEF mission. It is discussed which types of satellites and motors may have been responsible for this historical contribution. Altogether, 870 additional SRM retro-burns have been identified. An important task is the identification of such missions to complete the current event data base. Different types of motors have been used to de-orbit both large satellites and small film return capsules. The results of simulation runs are presented.

  1. Conservation Project Shows Substantial Reduction in Home Water Use

    ERIC Educational Resources Information Center

    Sharpe, William E.; Smith, Donald

    1978-01-01

    Describes a water use study-conservation project conducted by the Washington Suburban Sanitary Commission in Maryland. Results show a significant decrease in the amount of water used by home customers over a ten-year period. (Author/MA)

  2. Part-whole bias in intertemporal choice: An empirical study of additive assumption

    NASA Astrophysics Data System (ADS)

    Lu, Yang; Wu, Dongmei; Zhuang, Xintian

    2016-12-01

    Additive assumption means the overall value of multiple-dated outcomes is based on a simple aggregation of the values of each individual outcome. This assumption is generally accepted in the field of intertemporal choices. However, recent studies show additive assumption is questionable. In this paper, we experimentally tested the additive property of multiple-dated monetary rewards. Our results show: (1) additive assumption does not hold regardless of gain or loss; (2) the sum of subjective values of individual rewards is consistently larger than the valuation placed on the same rewards as a whole. This finding suggests that part-whole bias exists in the context of valuation of intertemporal monetary rewards.

  3. Late results.

    PubMed

    Daly, B D

    1999-08-01

    Pneumonectomy is performed for a number of benign and malignant conditions. It is most commonly performed for lung cancer. Adjuvant and neoadjuvant protocols have increased the number of these operations being performed and the long-term results are improving. Pneumonectomy may also be performed for metastases to lung and for mesothelioma with encouraging results. Some bronchial adenomas require pneumonectomy. Treatment of resistant mycobacteria or the complications of tuberculosis frequently require pneumonectomy. Late bronchopleural fistulae, esophagopleural fistulae, and empyema may occur.

  4. The stability of alloying additions in Zirconium

    NASA Astrophysics Data System (ADS)

    Lumley, S. C.; Murphy, S. T.; Burr, P. A.; Grimes, R. W.; Chard-Tuckey, P. R.; Wenman, M. R.

    2013-06-01

    The interactions of Cr, Fe, Nb, Ni, Sn, V and Y with Zr are simulated using density functional theory. Thermodynamic stabilities of various different Zr based intermetallic compounds, including multiple Laves phase structures and solutions of alloying additions in both α and β-Zr were investigated. The thermodynamic driving forces in this system can be correlated with trends in atomic radii and the relative electronegativities of the different species. Formation energies of Fe, Ni and Sn based intermetallic compounds were found to be negative, and the ZrFe and ZrNi intermetallics were metastable. Most elements displayed negative energies of solution in β-Zr but positive energies in the α-phase, with the exception of Sn (which was negative for both) and Y (which was positive for both). Solutions formed from intermetallics showed a similar trend. Cr -3s23p64s13d5. Fe -4s23d6. Nb -4s24p65s14d4. Ni -4s23d8. Sn -5s25p2. V -3s23p64s23d3. Y -4s24p65s24d1. Zr -4s24p65s24d2. The pseudopotential scheme used is "on-the-fly" generation, in which an isolated all-electron calculation is carried out before the main calculation and used as a starting point to generate a pseudopotential. This was carried out for all pseudopotentials except Cr and V, as the default on-the-fly pseudopotentials for these elements required a much higher cut-off energy. Instead, standard ultrasoft pseudopotentials, as found in the CASTEP pseudopotential library, were used for Cr and V. All pseudopotentials (both on-the-fly and library) are of the ultrasoft type [15], and so are compatible with each-other. Exchange-correlation was modelled using the Perdew, Burke and Ernzerhof formalisation of the Generalised Gradient Approximation [16].A series of simulations were run to establish an appropriate basis set cut-off energy, and the density of sampling in the Brillouin zone. The results were converged to within two decimal places for a cut-off energy of 450 eV and a k-point spacing of 0.003 nm-1. The k

  5. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  6. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  7. Additives for cement compositions based on modified peat

    SciTech Connect

    Kopanitsa, Natalya Sarkisov, Yurij Gorshkova, Aleksandra Demyanenko, Olga

    2016-01-15

    High quality competitive dry building mixes require modifying additives for various purposes to be included in their composition. There is insufficient amount of quality additives having stable properties for controlling the properties of cement compositions produced in Russia. Using of foreign modifying additives leads to significant increasing of the final cost of the product. The cost of imported modifiers in the composition of the dry building mixes can be up to 90% of the material cost, depending on the composition complexity. Thus, the problem of import substitution becomes relevant, especially in recent years, due to difficult economic situation. The article discusses the possibility of using local raw materials as a basis for obtaining dry building mixtures components. The properties of organo-mineral additives for cement compositions based on thermally modified peat raw materials are studied. Studies of the structure and composition of the additives are carried out by physicochemical research methods: electron microscopy and X-ray analysis. Results of experimental research showed that the peat additives contribute to improving of cement-sand mortar strength and hydrophysical properties.

  8. Additives for cement compositions based on modified peat

    NASA Astrophysics Data System (ADS)

    Kopanitsa, Natalya; Sarkisov, Yurij; Gorshkova, Aleksandra; Demyanenko, Olga

    2016-01-01

    High quality competitive dry building mixes require modifying additives for various purposes to be included in their composition. There is insufficient amount of quality additives having stable properties for controlling the properties of cement compositions produced in Russia. Using of foreign modifying additives leads to significant increasing of the final cost of the product. The cost of imported modifiers in the composition of the dry building mixes can be up to 90% of the material cost, depending on the composition complexity. Thus, the problem of import substitution becomes relevant, especially in recent years, due to difficult economic situation. The article discusses the possibility of using local raw materials as a basis for obtaining dry building mixtures components. The properties of organo-mineral additives for cement compositions based on thermally modified peat raw materials are studied. Studies of the structure and composition of the additives are carried out by physicochemical research methods: electron microscopy and X-ray analysis. Results of experimental research showed that the peat additives contribute to improving of cement-sand mortar strength and hydrophysical properties.

  9. Decreasing the initial irreversible capacity loss by addition of cyclic sulfate as electrolyte additives

    NASA Astrophysics Data System (ADS)

    Sano, Atsushi; Maruyama, Satoshi

    Initial irreversible capacity loss in graphite electrodes was suppressed by 1,3,2-dioxathiolane-2,2-dioxide and its derivatives (cyclic sulfates) in propylene carbonate (PC) containing electrolyte. Cyclic voltammetry (CV) showed that cyclic sulfates were decomposed at higher potentials than that for electrolyte solvents. In galvanostatic charge and discharge measurement, first cycle efficiency was increased from 58.2% to 90.5% by the addition of 1,3,2-dioxathiolane-2,2-dioxide. Passivation films formed by cyclic sulfates were observed by X-ray photoelectron spectroscopy (XPS), FT-IR, and pyrolysis/GC/MS (pyro/GC/MS). These results indicate that the surface was covered by a PEO like polymer with the inner layer comprised of Li 2S like compounds.

  10. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  11. Hydration of Portland cement with additions of calcium sulfoaluminates

    SciTech Connect

    Le Saout, Gwenn; Lothenbach, Barbara; Hori, Akihiro; Higuchi, Takayuki; Winnefeld, Frank

    2013-01-15

    The effect of mineral additions based on calcium aluminates on the hydration mechanism of ordinary Portland cement (OPC) was investigated using isothermal calorimetry, thermal analysis, X-ray diffraction, scanning electron microscopy, solid state nuclear magnetic resonance and pore solution analysis. Results show that the addition of a calcium sulfoaluminate cement (CSA) to the OPC does not affect the hydration mechanism of alite but controls the aluminate dissolution. In the second blend investigated, a rapid setting cement, the amorphous calcium aluminate reacts very fast to ettringite. The release of aluminum ions strongly retards the hydration of alite but the C-S-H has a similar composition as in OPC with no additional Al to Si substitution. As in CSA-OPC, the aluminate hydration is controlled by the availability of sulfates. The coupling of thermodynamic modeling with the kinetic equations predicts the amount of hydrates and pore solution compositions as a function of time and validates the model in these systems.

  12. Mechanical Properties of Iron Alumininides Intermetallic Alloy with Molybdenum Addition

    SciTech Connect

    Zuhailawati, H.; Fauzi, M. N. A.

    2010-03-11

    In this work, FeAl-based alloys with and without molybdenum addition were fabricated by sintering of mechanically alloyed powders in order to investigate the effect of molybdenum on iron aluminide mechanical properties. Bulk samples were prepared by mechanical alloying for 4 hours, pressing at 360 MPa and sintering at 1000 deg. C for 2 hours. The specimens were tested in compression at room temperature using Instron machine. The phase identification and microstructure of the consolidated material was examined by x-ray diffraction and scanning electron microscope correspondingly. Results show that 2.5 wt%Mo addition significantly increased the ultimate stress and ultimate strain in compressive mode due to solid solution hardening. However, the addition of Mo more than 2.5 wt% was accompanied by a reduction in both properties caused by the presence of Mo-rich precipitate particles.

  13. Accelerating procelain formation by incorporating a complex additive

    SciTech Connect

    Maslennikova, G.N.; Dubovitskii, S.A.; Moroz, I.K.

    1986-05-01

    The authors studied the influence of a complex additive consisting of oxides of calcium, zinc, and magnesium on the formaton of porcelain. In order to achieve a more uniform distribution of the complex additive in the porcelain body it was incorporated in the form of water soluble salts-nitrates, which ensured comparability of results and excluded the effect of the different types of anions. The study of the main parameters of sintering (porosity, shrinkage, and mechanical strength) for the test bodies showed that they sinter at lower temperatures and attain zero porosity, maximum shrinkage, and mechanical strength. The most typical bodies indentified in this way were investigated by methods of complex differential thermal analysis and x-ray diffraction. Thus, the introduction of complex additives consisting of calcium, zinc, and magnesium oxides contributes to the earlier formation of porcelain. With the reduction of firing temperatures by 100/sup 0/C the authors observe an improvement in the basic properties of porcelain.

  14. Hyperbolic tangential function-based progressive addition lens design.

    PubMed

    Qiu, Gufeng; Cui, Xudong

    2015-12-10

    The diopter distribution is key to the successful design of a progressive addition lens. A hyperbolic tangential function is then introduced to describe well the desired diopter distribution on the lens. Simulation and fabrication show that the astigmia on the whole surface is very close to the addition, exhibiting superior performance than that of currently used high-order polynomials and cosine functions. Our investigations found that once the diopter distribution design is reasonable, both the direct and indirect methods of constructing a progressive addition lens can give consistent results. With this function we are able to effectively control the design of critical areas, the position, sizes of far-view and near-view zones, as well as the channel of the lens. This study would provide an efficient way to customize different progressive lenses not only for presbyopia, but also for anti-fatigue, office progressive usages, etc.

  15. ICAAS piloted simulation results

    NASA Astrophysics Data System (ADS)

    Landy, R. J.; Halski, P. J.; Meyer, R. P.

    1994-05-01

    This paper reports piloted simulation results from the Integrated Control and Avionics for Air Superiority (ICAAS) piloted simulation evaluations. The program was to develop, integrate, and demonstrate critical technologies which will enable United States Air Force tactical fighter 'blue' aircraft to achieve superiority and survive when outnumbered by as much as four to one by enemy aircraft during air combat engagements. Primary emphasis was placed on beyond visual range (BVR) combat with provisions for effective transition to close-in combat. The ICAAS system was developed and tested in two stages. The first stage, called low risk ICAAS, was defined as employing aircraft and avionics technology with an initial operational date no later than 1995. The second stage, called medium risk ICAAS, was defined as employing aircraft and avionics technology with an initial operational date no later than 1998. Descriptions of the low risk and medium risk simulation configurations are given. Normalized (unclassified) results from both the low risk and medium risk ICAAS simulations are discussed. The results show the ICAAS system provided a significant improvement in air combat performance when compared to a current weapon system. Data are presented for both current generation and advanced fighter aircraft. The ICAAS technologies which are ready for flight testing in order to transition to the fighter fleet are described along with technologies needing additional development.

  16. Research Results

    NASA Astrophysics Data System (ADS)

    2011-12-01

    Research on Global Carbon Emission and Sequestration NSFC Funded Project Made Significant Progress in Quantum Dynamics Functional Human Blood Protein Obtained from Rice How Giant Pandas Thrive on a Bamboo Diet New Evidence of Interpersonal Violence from 129,000 Years Ago Found in China Aptamer-Mediated Efficient Capture and Release of T Lymphocytes on Nanostructured Surfaces BGI Study Results on Resequencing 50 Accessions of Rice Cast New Light on Molecular Breeding BGI Reports Study Results on Frequent Mutation of Genes Encoding UMPP Components in Kidney Cancer Research on Habitat Shift Promoting Species Diversification

  17. Cleaning Process Development for Metallic Additively Manufactured Parts

    NASA Technical Reports Server (NTRS)

    Tramel, Terri L.; Welker, Roger; Lowery, Niki; Mitchell, Mark

    2014-01-01

    Additive Manufacturing of metallic components for aerospace applications offers many advantages over traditional manufacturing techniques. As a new technology, many aspects of its widespread utilization remain open to investigation. Among these are the cleaning processes that can be used for post finishing of parts and measurements to verify effectiveness of the cleaning processes. Many cleaning and drying processes and measurement methods that have been used for parts manufactured using conventional techniques are candidates that may be considered for cleaning and verification of additively manufactured parts. Among these are vapor degreasing, ultrasonic immersion and spray cleaning, followed by hot air drying, vacuum baking and solvent displacement drying. Differences in porosity, density, and surface finish of additively manufactured versus conventionally manufactured parts may introduce new considerations in the selection of cleaning and drying processes or the method used to verify their effectiveness. This presentation will review the relative strengths and weaknesses of different candidate cleaning and drying processes as they may apply to additively manufactured metal parts for aerospace applications. An ultrasonic cleaning technique for exploring the cleanability of parts will be presented along with an example using additively manufactured Inconel 718 test specimens to illustrate its use. The data analysis shows that this ultrasonic cleaning approach results in a well-behaved ultrasonic cleaning/extraction behavior. That is, it does not show signs of accelerated cavitation erosion of the base material, which was later confirmed by neutron imaging. In addition, the analysis indicated that complete cleaning would be achieved by ultrasonic immersion cleaning at approximately 5 minutes, which was verified by subsequent cleaning of additional parts.

  18. Photographic copy of photograph, aerial view looking north and showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of photograph, aerial view looking north and showing Test Stand 'A' (at bottom), Test Stand 'B' (upper right), and a portion of Test Stand 'C' (top of view). Compare HAER CA-163-1 and 2 and note addition of liquid nitrogen storage tank (Building 4262/E-63) to west of Test Stand 'C' as well as various ancillary facilities located behind earth barriers near Test Stand 'C.' (JPL negative no. 384-3006-A, 12 December 1961) - Jet Propulsion Laboratory Edwards Facility, Edwards Air Force Base, Boron, Kern County, CA

  19. Credit PSR. This view shows the west and north facades ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Credit PSR. This view shows the west and north facades of the storage facility as seen when approaching from Circle Drive, looking east (92°). The metal shed at right was the original structure; the second shed is a later addition. All structures are metal frame covered with metal cladding, grounding them electrically and rendering them fireproof. The entire facility was rated for a maximum of 100,000 pounds (45,450 Kg) of class 1.3 materials, and four personnel - Jet Propulsion Laboratory Edwards Facility, Solid Oxidizer Storage, Edwards Air Force Base, Boron, Kern County, CA

  20. 5. Photographic copy of engineering drawing showing plans, elevation and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photographic copy of engineering drawing showing plans, elevation and section of Deluge Water System, including reservior (4316), Pump House (4317), and water tower. Job No. Muroc A(5-ll), Military Construction, San Bernardino-Mojave Area, San Bernardino, California: Muroc Bombing Range, Muroc Lake, California.; Additional Facilities for Materiel Center Flight Test Base, Water Supply System, Plans and Sections, Sheet 5 of 10, May 1943. Records on file at AFFTC/CE-CECC-B (Design/Construction Flight/RPMC), Edwards AFB, California. - Edwards Air Force Base, North Base, Deluge Water Pumping Station, Near Second & D Streets, Boron, Kern County, CA

  1. Kuwaiti oil sector shows more signs of recovery

    SciTech Connect

    Not Available

    1992-04-06

    This paper reports that Kuwait's oil sector continues to show signs of recovery from the Persian Gulf war. On Mar. 23 Kuwait Petroleum Co. (KPC) loaded the country's first shipment of liquefied petroleum gas for export since the Iraqi invasion in August 1990. In addition, the first shipment of Kuwaiti crude recovered from giant oil lakes formed by hundreds of wild wells sabotaged in the war was to arrive by tanker in Naples, Italy, late last month. The tanker is carrying 210,000 bbl of crude. However, the project to clean up the lakes and recover more oil, undertaken by Bechtel Corp. with Kuwait Oil Co. (KOC), has reached a stand still.

  2. Use of waste rubber as concrete additive.

    PubMed

    Chou, Liang Hsing; Lu, Chun-Ku; Chang, Jen-Ray; Lee, Maw Tien

    2007-02-01

    For resource reutilization, scrap tyres have long been investigated as an additive to concrete to form 'Rubcrete' for various applications and have shown promising results. However, the addition of rubber particles leads to the degradation of physical properties, particularly, the compressive strength of the concrete. In this study, a theoretical model was proposed to shed light on the mechanisms of decrease in compressive strength due to the addition of rubber particles as well as improvement in compressive strength through modification of particle surfaces. The literature suggests that the compressive strength can be improved by soaking the rubber particles in alkaline solution first to increase the inter-phase bonding between the rubber particles and cement. Instead, we discovered that the loss in compressive strength was due to local imperfections in the hydration of cement, induced by the addition of heterogeneous and hydrophobic rubber particles. Microscopic studies showed that the rubber particles disturbed the water transfer to create channels, which were prone to cracking and led to a loss in the compressive strength. Unexpectedly, no cracking was found along the surfaces of the rubber particles, indicating that the bonding strength between the rubber particles and cement phases was not the critical factor in determining the compressive strength. Therefore, a theoretical model was proposed to describe the water transfer in the Rubcrete specimens to explain the experimental data. In the model, the local water available for hydration (Q) is: Q = -A(slv)/6piv, where Q, A(slv), and v are mass flow rate (kg s(-1)), Hamaker constant (J), and dynamic viscosity (m2 s(-1)), respectively. By maximizing the quantity Q and, in turn, the Hamaker constant A(slv), the compressive strength could be improved. The Hamaker constant A(slv) for water film on rubber particle surfaces was smaller than that for the hydrated cement particles; the water transfer rate was lower in

  3. The Frontiers of Additive Manufacturing

    SciTech Connect

    Grote, Christopher John

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  4. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  5. Additive Manufacturing Integrated Energy Demonstration

    SciTech Connect

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-02-05

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  6. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  7. Additive Manufacturing Integrated Energy Demonstration

    ScienceCinema

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-07-12

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  8. Nanoengineered Additives for Active Coatings

    DTIC Science & Technology

    2007-04-01

    commercial ad bial activ component from the coating, leading to eventual depletion of the film. Small TPU samples were evaluated using a Kirby - Bauer ...7 Table 5. Summary of 24-hr ASTM E 2180 tests with 1 weight-percent additive in PUr (solvent dispersible) based on 6-log loading of...Noveon X-1150). The ASTM E 2180 test is run in triplicate (Note that alternative ro 1° amines) was suspended in dry tetrahydrofuran (THF) (150 mL) in

  9. Reversible Oxidative Addition at Carbon.

    PubMed

    Eichhorn, Antonius F; Fuchs, Sonja; Flock, Marco; Marder, Todd B; Radius, Udo

    2017-04-07

    The reactivity of N-heterocyclic carbenes (NHCs) and cyclic alkyl amino carbenes (cAACs) with arylboronate esters is reported. The reaction with NHCs leads to the reversible formation of thermally stable Lewis acid/base adducts Ar-B(OR)2 ⋅NHC (Add1-Add6). Addition of cAAC(Me) to the catecholboronate esters 4-R-C6 H4 -Bcat (R=Me, OMe) also afforded the adducts 4-R-C6 H4 Bcat⋅cAAC(Me) (Add7, R=Me and Add8, R=OMe), which react further at room temperature to give the cAAC(Me) ring-expanded products RER1 and RER2. The boronate esters Ar-B(OR)2 of pinacol, neopentylglycol, and ethyleneglycol react with cAAC at RT via reversible B-C oxidative addition to the carbene carbon atom to afford cAAC(Me) (B{OR}2 )(Ar) (BCA1-BCA6). NMR studies of cAAC(Me) (Bneop)(4-Me-C6 H4 ) (BCA4) demonstrate the reversible nature of this oxidative addition process.

  10. Improvement of GRCop-84 Through the Addition of Zirconium

    NASA Technical Reports Server (NTRS)

    Ellis, David L.; Lerch, Bradley A.

    2012-01-01

    GRCop-84 (Cu-8 at.% Cr-4 at.% Nb) has excellent strength, creep resistance, low cycle fatigue (LCF) life and stability at elevated temperatures. It suffers in comparison to many commercially available precipitation-strengthened alloys below 500 C (932 F). It was observed that the addition of Zr consistently improved the mechanical properties of Cu-based alloys especially below 500 C. In an effort to improve the low temperature properties of GRCop-84, 0.35 wt.% Zr was added to the alloy. Limited tensile, creep, and LCF testing was conducted to determine if improvements occur. The results showed some dramatic increases in the tensile and creep properties at the conditions tested with the probability of additional improvements being possible through cold working. LCF testing at room temperature did not show an improvement, but improvements might occur at elevated temperatures.

  11. Showing and Telling Farming: Agricultural Shows and Re-Imaging British Agriculture

    ERIC Educational Resources Information Center

    Holloway, Lewis

    2004-01-01

    Some actors in the ''mainstream'' agricultural sector are beginning to engage in strategies of influencing public perceptions of farming, responding to public anxieties over industrialised agriculture and to a supposed separation of non-farming publics from food production. This paper focuses on agricultural shows as sites and events central to…

  12. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  13. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  14. Characterization of Metal Powders Used for Additive Manufacturing

    PubMed Central

    Slotwinski, JA; Garboczi, EJ; Stutzman, PE; Ferraris, CF; Watson, SS; Peltz, MA

    2014-01-01

    Additive manufacturing (AM) techniques1 can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process. PMID:26601040

  15. Characterization of Metal Powders Used for Additive Manufacturing.

    PubMed

    Slotwinski, J A; Garboczi, E J; Stutzman, P E; Ferraris, C F; Watson, S S; Peltz, M A

    2014-01-01

    Additive manufacturing (AM) techniques can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process.

  16. Tevatron results

    SciTech Connect

    Lefevre, R.; /Barcelona, Autonoma U.

    2005-01-01

    Recent results obtained by the CDF and D0 experiments at the Tevatron Run II are presented. A first part is dedicated to QCD physics where inclusive jet production, dijet azimuthal decorrelations and jet shapes measurements are reported. Electroweak physics is then discussed relating measurements of the W and Z bosons productions, of the forward-backward charge asymmetry in W production, of the W width and of the top quarks mass. The extensive Run II exploration program is finally approached reporting about searches for neutral supersymmetric Higgs bosons in multijet events and for sbottom quark from gluino decays.

  17. Computational Process Modeling for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Bagg, Stacey; Zhang, Wei

    2014-01-01

    Computational Process and Material Modeling of Powder Bed additive manufacturing of IN 718. Optimize material build parameters with reduced time and cost through modeling. Increase understanding of build properties. Increase reliability of builds. Decrease time to adoption of process for critical hardware. Potential to decrease post-build heat treatments. Conduct single-track and coupon builds at various build parameters. Record build parameter information and QM Meltpool data. Refine Applied Optimization powder bed AM process model using data. Report thermal modeling results. Conduct metallography of build samples. Calibrate STK models using metallography findings. Run STK models using AO thermal profiles and report STK modeling results. Validate modeling with additional build. Photodiode Intensity measurements highly linear with power input. Melt Pool Intensity highly correlated to Melt Pool Size. Melt Pool size and intensity increase with power. Applied Optimization will use data to develop powder bed additive manufacturing process model.

  18. The Mozart Effect: Additional Data.

    PubMed

    Hughes, John R.

    2002-04-01

    After the review of the Mozart effect was published in this journal (Hughes JR. Epilepsy Behav 2001;2:369-417), additional data from the music of Haydn and Liszt have been analyzed that may account for the decrease in seizure activity originally reported during Mozart music. Even with these added data Mozart music continued to score significantly higher than the selections from the other six composers in one of the important characteristics of this music, namely, the repetition of the melody. However Haydn's values were second highest among Mozart, J. S. Bach, Wagner, Beethoven, Chopin, and Liszt.

  19. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  20. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  1. Theatre fleet's vital additional capacity.

    PubMed

    2012-11-01

    Vanguard Healthcare's fleet of mobile surgical facilities has been deployed to healthcare sites throughout Europe and beyond for over a decade, providing vital additional clinical capacity when existing buildings are refurbished or upgraded, in the event of flood or fire, or simply to help hospitals cater for rising demand. It is a combination of careful planning, teamwork, and the specialist expertise of Vanguard's personnel--many with a clinical background--that ensures not only each unit's successful installation, but equally its subsequent running, servicing, and maintenance, the company explains.

  2. Effects of an additional dimension in the Young experiment

    SciTech Connect

    Barros, Allan Kardec

    2015-09-15

    The results of the Young experiment can be analyzed either by classical or Quantum Physics. The later one though leads to a more complete interpretation, based on two different patterns that appear when one works either with single or double slits. Here we show that the two patterns can be derived from a single principle, in the context of General Relativity, if one assumes an additional spatial dimension to the four known today. The found equations yield the same results as those in Quantum Mechanics.

  3. Composite filter aids for cleanup of additives

    SciTech Connect

    Rudenko, L.I.; Sklyar, V.Y.

    1984-03-01

    This article examines the properties of composite filter aids in additive cleanup using two- and three-component filter aid composites based on perlite, kieselguhr, diatomite, asbestos, and wood flour. Filtration tests were run on naphtha solutions of the additive zinc dialkyldithiophosphate. The laboratory studies indicate that composites of perlite and kieselguhr with fibrous materials (wood flour or asbestos) show great promise for the removal of solid contaminants from the zinc disalkydithiophosphate additive. The advantages of the filter aid composite based on perlite, kieselguhr, and wood flour in comparison with the two-component composites are the higher filtration rate (by 26%) and the smaller losses of additive (by a factor of 2.1) and isobutyl alcohol (by a factor of 1.6). It is demonstrated that the filtration rate with the three components is 50-60% higher than with the composite of perlite with kieselguhr. The filtration of the zinc dialkyldithiophosphate additive using the composite filter aid based on perlite, kieselguhr, and wood flour, has been adopted at the Volgograd Petroleum Refinery. Includes 2 tables.

  4. Pyrophosphorolysis of CCA addition: implication for fidelity.

    PubMed

    Igarashi, Takao; Liu, Cuiping; Morinaga, Hironobu; Kim, Sangbumn; Hou, Ya-Ming

    2011-11-18

    In nucleic acid polymerization reaction, pyrophosphorolysis is the reversal of nucleotide addition, in which the terminal nucleotide is excised in the presence of inorganic pyrophosphate (PPi). The CCA enzymes are unusual RNA polymerases, which catalyze CCA addition to positions 74-76 at the tRNA 3' end without using a nucleic acid template. To better understand the reaction mechanism of CCA addition, we tested pyrophosphorolysis of CCA enzymes, which are divided into two structurally distinct classes. Here, we show that only class II CCA enzymes catalyze pyrophosphorolysis and that the reaction can initiate from all three CCA positions and proceed processively until the removal of nucleotide C74. Pyrophosphorolysis of class II enzymes establishes a fundamental difference from class I enzymes, and it is achieved only with the tRNA structure and with specific divalent metal ions. Importantly, pyrophosphorolysis enables class II enzymes to efficiently remove an incorrect A75 nucleotide from the 3' end, at a rate much faster than the rate of A75 incorporation, suggesting the ability to perform a previously unexpected quality control mechanism for CCA synthesis. Measurement of kinetic parameters of the class II Escherichia coli CCA enzyme reveals that the enzyme catalyzes pyrophosphorolysis slowly relative to the forward nucleotide addition and that it exhibits weak binding affinity to PPi relative to NTP, suggesting a mechanism in which PPi is rapidly released after each nucleotide addition as a driving force to promote the forward synthesis of CCA.

  5. 78 FR 63967 - Procurement List; Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... SE, Marietta, GA NPA: L.C. Industries for the Blind, Inc., Durham, NC Contracting Activity: DEPT OF... in any additional reporting, recordkeeping or other compliance requirements for small entities other... result in authorizing small entities to provide the services to the Government. 3. There are no...

  6. Priming Addition Facts with Semantic Relations

    ERIC Educational Resources Information Center

    Bassok, Miriam; Pedigo, Samuel F.; Oskarsson, An T.

    2008-01-01

    Results from 2 relational-priming experiments suggest the existence of an automatic analogical coordination between semantic and arithmetic relations. Word pairs denoting object sets served as primes in a task that elicits "obligatory" activation of addition facts (5 + 3 activates 8; J. LeFevre, J. Bisanz, & L. Mrkonjic, 1988). Semantic relations…

  7. Addition of polyhaloalkanes to 1-vinylsilatrane

    SciTech Connect

    Voronkov, M.G.; Petukhov, L.P.; Adamovich, S.N.; Baryshok, V.P.; Rakhlin, V.I.; Shterenberg, B.Z.; Mirskov, R.G.

    1987-07-20

    In their previous work, they showed that the homolytic reaction of 1-allylsilatrane with polyhaloalkanes gives 1-halosilatranes. In the present work, they discovered the addition of polyhaloalkanes to 1-vinylsilatranes both upon photochemical initiation and in the presence of peroxides. The ease of this reaction, its regiospecificity and high product yields permit them to recommend it as a preparative method for the synthesis of 1-polyhaloalkylsilatranes.

  8. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  9. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  10. Graphene oxide immobilized enzymes show high thermal and solvent stability

    NASA Astrophysics Data System (ADS)

    Hermanová, Soňa; Zarevúcká, Marie; Bouša, Daniel; Pumera, Martin; Sofer, Zdeněk

    2015-03-01

    The thermal and solvent tolerance of enzymes is highly important for their industrial use. We show here that the enzyme lipase from Rhizopus oryzae exhibits exceptionally high thermal stability and high solvent tolerance and even increased activity in acetone when immobilized onto a graphene oxide (GO) nanosupport prepared by Staudenmaier and Brodie methods. We studied various forms of immobilization of the enzyme: by physical adsorption, covalent attachment, and additional crosslinking. The activity recovery was shown to be dependent on the support type, enzyme loading and immobilization procedure. Covalently immobilized lipase showed significantly better resistance to heat inactivation (the activity recovery was 65% at 70 °C) in comparison with the soluble counterpart (the activity recovery was 65% at 40 °C). Physically adsorbed lipase achieved over 100% of the initial activity in a series of organic solvents. These findings, showing enhanced thermal stability and solvent tolerance of graphene oxide immobilized enzyme, will have a profound impact on practical industrial scale uses of enzymes for the conversion of lipids into fuels.The thermal and solvent tolerance of enzymes is highly important for their industrial use. We show here that the enzyme lipase from Rhizopus oryzae exhibits exceptionally high thermal stability and high solvent tolerance and even increased activity in acetone when immobilized onto a graphene oxide (GO) nanosupport prepared by Staudenmaier and Brodie methods. We studied various forms of immobilization of the enzyme: by physical adsorption, covalent attachment, and additional crosslinking. The activity recovery was shown to be dependent on the support type, enzyme loading and immobilization procedure. Covalently immobilized lipase showed significantly better resistance to heat inactivation (the activity recovery was 65% at 70 °C) in comparison with the soluble counterpart (the activity recovery was 65% at 40 °C). Physically adsorbed

  11. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  12. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  13. Optics of progressive addition lenses.

    PubMed

    Sheedy, J E; Buri, M; Bailey, I L; Azus, J; Borish, I M

    1987-02-01

    The optical characteristics of the major progressive addition lenses were measured using an automated lensometer with a specially designed lens holder to simulate eye rotation. Measurements were made every 3 degrees (about 1.5 mm) and graphs of isospherical equivalent lines and isocylinder lines were developed. Generally the near zone of these lenses is narrower and lower than in bifocal or trifocal lenses. Distinct differences exist between the various progressive lenses. The width of the near zone, rate of power progression, amount of unwanted cylinder (level with the distance center), and clarity of the distance zone are compared for the various lenses. The optical measurements demonstrate an apparent trade-off between the size of the cylinder-free area of the lens and the amount of the cylinder.

  14. Evaluation of advanced polymers for additive manufacturing

    SciTech Connect

    Rios, Orlando; Morrison, Crystal

    2015-09-01

    The goal of this Manufacturing Demonstration Facility (MDF) technical collaboration project between Oak Ridge National Laboratory (ORNL) and PPG Industries, Inc. was to evaluate the feasibility of using conventional coatings chemistry and technology to build up material layer-by-layer. The PPG-ORNL study successfully demonstrated that polymeric coatings formulations may overcome many limitations of common thermoplastics used in additive manufacturing (AM), allow lightweight nozzle design for material deposition and increase build rate. The materials effort focused on layer-by-layer deposition of coatings with each layer fusing together. The combination of materials and deposition results in an additively manufactured build that has sufficient mechanical properties to bear the load of additional layers, yet is capable of bonding across the z-layers to improve build direction strength. The formulation properties were tuned to enable a novel, high-throughput deposition method that is highly scalable, compatible with high loading of reinforcing fillers, and is inherently low-cost.

  15. Snacking on Television: A Content Analysis of Adolescents’ Favorite Shows

    PubMed Central

    Larson, Nicole I.; Gollust, Sarah E.; Neumark-Sztainer, Dianne

    2016-01-01

    Introduction Snacking is a complex behavior that may be influenced by entertainment media. Research suggests that snacking and unhealthy foods are commonly shown in programming that targets young audiences, but shows selected for study have been limited. We conducted a content analysis on shows that were named as favorites by adolescents to characterize portrayals of snacking on popular television. Methods A diverse sample of 2,130 adolescents (mean age, 14.3 y) listed 3 favorite television shows in a 2010 school-based survey. Three episodes each of the 25 most popular shows were coded for food-related content, including healthfulness, portion size, screen time use, setting, and social context. We also analyzed the characteristics of characters involved in eating incidents, the show type, and the show rating. We used χ2 tests, binomial tests, and multilevel regression models to compare incidence of snacks versus meals, the characteristics of those involved, and snacking across show characteristics. Results Almost half of food incidents on television shows were snacks. Snacks were significantly more likely than meals to be “mostly unhealthy” (69.3% vs 22.6%, P < .001) and were more likely to include screen time use (25.0% of snacking incidents vs 4.0% of meals, P < .001). Young characters and those coded as being of low socioeconomic status or overweight were overrepresented in snacking incidents. Sitcoms and shows rated for a youth audience were significantly more likely to portray snacking than were shows for adult audiences. Conclusion Media awareness and literacy programs should include foods and snacking behaviors among the issues they address. More healthful portrayals of food and dietary intake in entertainment shows’ content would create a healthier media environment for youth. PMID:27197079

  16. Network Reconstruction Using Nonparametric Additive ODE Models

    PubMed Central

    Henderson, James; Michailidis, George

    2014-01-01

    Network representations of biological systems are widespread and reconstructing unknown networks from data is a focal problem for computational biologists. For example, the series of biochemical reactions in a metabolic pathway can be represented as a network, with nodes corresponding to metabolites and edges linking reactants to products. In a different context, regulatory relationships among genes are commonly represented as directed networks with edges pointing from influential genes to their targets. Reconstructing such networks from data is a challenging problem receiving much attention in the literature. There is a particular need for approaches tailored to time-series data and not reliant on direct intervention experiments, as the former are often more readily available. In this paper, we introduce an approach to reconstructing directed networks based on dynamic systems models. Our approach generalizes commonly used ODE models based on linear or nonlinear dynamics by extending the functional class for the functions involved from parametric to nonparametric models. Concomitantly we limit the complexity by imposing an additive structure on the estimated slope functions. Thus the submodel associated with each node is a sum of univariate functions. These univariate component functions form the basis for a novel coupling metric that we define in order to quantify the strength of proposed relationships and hence rank potential edges. We show the utility of the method by reconstructing networks using simulated data from computational models for the glycolytic pathway of Lactocaccus Lactis and a gene network regulating the pluripotency of mouse embryonic stem cells. For purposes of comparison, we also assess reconstruction performance using gene networks from the DREAM challenges. We compare our method to those that similarly rely on dynamic systems models and use the results to attempt to disentangle the distinct roles of linearity, sparsity, and derivative

  17. Distributing and Showing Farmer Learning Videos in Bangladesh

    ERIC Educational Resources Information Center

    Bentley, Jeffery W.; Van Mele, Paul; Harun-ar-Rashid, Md.; Krupnik, Timothy J.

    2016-01-01

    Purpose: To describe the results of showing farmer learning videos through different types of volunteers. Design/Methodology/Approach: Semi-structured interviews with volunteers from different occupational groups in Bangladesh, and a phone survey with 227 respondents. Findings: Each occupational group acted differently. Shop keepers, tillage…

  18. Reciprocal Ontological Models Show Indeterminism Comparable to Quantum Theory

    NASA Astrophysics Data System (ADS)

    Bandyopadhyay, Somshubhro; Banik, Manik; Bhattacharya, Some Sankar; Ghosh, Sibasish; Kar, Guruprasad; Mukherjee, Amit; Roy, Arup

    2017-02-01

    We show that within the class of ontological models due to Harrigan and Spekkens, those satisfying preparation-measurement reciprocity must allow indeterminism comparable to that in quantum theory. Our result implies that one can design quantum random number generator, for which it is impossible, even in principle, to construct a reciprocal deterministic model.

  19. AirShow 1.0 CFD Software Users' Guide

    NASA Technical Reports Server (NTRS)

    Mohler, Stanley R., Jr.

    2005-01-01

    AirShow is visualization post-processing software for Computational Fluid Dynamics (CFD). Upon reading binary PLOT3D grid and solution files into AirShow, the engineer can quickly see how hundreds of complex 3-D structured blocks are arranged and numbered. Additionally, chosen grid planes can be displayed and colored according to various aerodynamic flow quantities such as Mach number and pressure. The user may interactively rotate and translate the graphical objects using the mouse. The software source code was written in cross-platform Java, C++, and OpenGL, and runs on Unix, Linux, and Windows. The graphical user interface (GUI) was written using Java Swing. Java also provides multiple synchronized threads. The Java Native Interface (JNI) provides a bridge between the Java code and the C++ code where the PLOT3D files are read, the OpenGL graphics are rendered, and numerical calculations are performed. AirShow is easy to learn and simple to use. The source code is available for free from the NASA Technology Transfer and Partnership Office.

  20. Five Kepler target stars that show multiple transiting exoplanet candidates

    SciTech Connect

    Steffen, Jason H.; Batalha, Natalie M.; Borucki, William J.; Buchhave, Lars A.; Caldwell, Douglas A.; Cochran, William D.; Endl, Michael; Fabrycky, Daniel C.; Fressin, Francois; Ford, Eric B.; Fortney, Jonathan J.; /UC, Santa Cruz, Phys. Dept. /NASA, Ames

    2010-06-01

    We present and discuss five candidate exoplanetary systems identified with the Kepler spacecraft. These five systems show transits from multiple exoplanet candidates. Should these objects prove to be planetary in nature, then these five systems open new opportunities for the field of exoplanets and provide new insights into the formation and dynamical evolution of planetary systems. We discuss the methods used to identify multiple transiting objects from the Kepler photometry as well as the false-positive rejection methods that have been applied to these data. One system shows transits from three distinct objects while the remaining four systems show transits from two objects. Three systems have planet candidates that are near mean motion commensurabilities - two near 2:1 and one just outside 5:2. We discuss the implications that multitransiting systems have on the distribution of orbital inclinations in planetary systems, and hence their dynamical histories; as well as their likely masses and chemical compositions. A Monte Carlo study indicates that, with additional data, most of these systems should exhibit detectable transit timing variations (TTV) due to gravitational interactions - though none are apparent in these data. We also discuss new challenges that arise in TTV analyses due to the presence of more than two planets in a system.

  1. FIVE KEPLER TARGET STARS THAT SHOW MULTIPLE TRANSITING EXOPLANET CANDIDATES

    SciTech Connect

    Steffen, Jason H.; Batalha, Natalie M.; Borucki, William J.; Caldwell, Douglas A.; Haas, Michael J.; Jenkins, Jon M.; Koch, David; Lissauer, Jack J.; Buchhave, Lars A.; Fabrycky, Daniel C.; Fressin, Francois; Holman, Matthew J.; Latham, David W.; Cochran, William D.; Endl, Michael; Ford, Eric B.; Moorhead, Althea V.; Fortney, Jonathan J.; Howell, Steve B.; Isaacson, Howard

    2010-12-10

    We present and discuss five candidate exoplanetary systems identified with the Kepler spacecraft. These five systems show transits from multiple exoplanet candidates. Should these objects prove to be planetary in nature, then these five systems open new opportunities for the field of exoplanets and provide new insights into the formation and dynamical evolution of planetary systems. We discuss the methods used to identify multiple transiting objects from the Kepler photometry as well as the false-positive rejection methods that have been applied to these data. One system shows transits from three distinct objects while the remaining four systems show transits from two objects. Three systems have planet candidates that are near mean motion commensurabilities-two near 2:1 and one just outside 5:2. We discuss the implications that multi-transiting systems have on the distribution of orbital inclinations in planetary systems, and hence their dynamical histories, as well as their likely masses and chemical compositions. A Monte Carlo study indicates that, with additional data, most of these systems should exhibit detectable transit timing variations (TTVs) due to gravitational interactions, though none are apparent in these data. We also discuss new challenges that arise in TTV analyses due to the presence of more than two planets in a system.

  2. [Intolerance to food additives: an update].

    PubMed

    Cardinale, F; Mangini, F; Berardi, M; Sterpeta Loffredo, M; Chinellato, I; Dellino, A; Cristofori, F; Di Domenico, F; Mastrototaro, M F; Cappiello, A; Centoducati, T; Carella, F; Armenio, L

    2008-12-01

    Contrary to common believing, the prevalence of the intolerance to food additives in the general population is rather low. Nowadays many doubts persist with regard both to the pathogenetic mechanisms and to the clinical and diagnostic aspects in this field. Symptoms due to, or exacerbated from, food additives usually involve non-IgE-mediate mechanisms (pseudo-allergic reactions, PAR) and are usually less severe of those induced by food allergy. The most frequent clinical feature of the intolerance to food additives still remains the urticaria-angioedema syndrome, although these substances are really involved only in a minority of patients. Other possible clinical features include anaphylaxis, atopic eczema, behaviour disturbances, asthma and non-allergic rhinitis. The diagnostic approach consists in diary cards, reporting symptoms and food habits, elimination diet and double blinded placebo-controlled oral challenge with suspected additives. However, such procedure still remains poorly standardized and numerous uncertainties persist with regard to optimal conditions for performing and interpret the challenge results. The therapeutic approach consists in the exclusion of foods and products containing the additive involved, and, in patients not compliant to the diet, in treatment with symptomatic drugs.

  3. Priming addition facts with semantic relations.

    PubMed

    Bassok, Miriam; Pedigo, Samuel F; Oskarsson, An T

    2008-03-01

    Results from 2 relational-priming experiments suggest the existence of an automatic analogical coordination between semantic and arithmetic relations. Word pairs denoting object sets served as primes in a task that elicits "obligatory" activation of addition facts (5 + 3 activates 8; J. LeFevre, J. Bisanz, & L. Mrkonjic, 1988). Semantic relations between the priming words were either aligned or misaligned with the structure of addition (M. Bassok, V. M. Chase, & S. A. Martin, 1998). Obligatory activation of addition facts occurred when the digits were primed by categorically related words (tulips-daisies), which are aligned with addition, but did not occur when the digits were primed by unrelated words (hens-radios, Experiment 1) or by functionally related words (records-songs, Experiment 2), which are misaligned with addition. These findings lend support to the viability of automatic analogical priming (B. A. Spellman, K. J. Holyoak, & R. G. Morrison, 2001) and highlight the relevance of arithmetic applications to theoretical accounts of mental arithmetic.

  4. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  5. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  6. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  7. Children's understanding of additive concepts.

    PubMed

    Robinson, Katherine M; Dubé, Adam K; Beatch, Jacqueline-Ann

    2017-04-01

    Most research on children's arithmetic concepts is based on one concept at a time, limiting the conclusions that can be made about how children's conceptual knowledge of arithmetic develops. This study examined six arithmetic concepts (identity, negation, commutativity, equivalence, inversion, and addition and subtraction associativity) in Grades 3, 4, and 5. Identity (a-0=a) and negation (a-a=0) were well understood, followed by moderate understanding of commutativity (a+b=b+a) and inversion (a+b-b=a), with weak understanding of equivalence (a+b+c=a+[b+c]) and associativity (a+b-c=[b-c]+a). Understanding increased across grade only for commutativity and equivalence. Four clusters were found: The Weak Concept cluster understood only identity and negation; the Two-Term Concept cluster also understood commutativity; the Inversion Concept cluster understood identity, negation, and inversion; and the Strong Concept cluster had the strongest understanding of all of the concepts. Grade 3 students tended to be in the Weak and Inversion Concept clusters, Grade 4 students were equally likely to be in any of the clusters, and Grade 5 students were most likely to be in the Two-Term and Strong Concept clusters. The findings of this study highlight that conclusions about the development of arithmetic concepts are highly dependent on which concepts are being assessed and underscore the need for multiple concepts to be investigated at the same time.

  8. Gardasil 9 Protects against Additional HPV Types

    Cancer.gov

    A summary of results from a large randomized clinical trial that shows a new human papillomavirus (HPV) vaccine effectively prevented infection and disease caused by seven HPV types that cause cancer and two HPV types that cause genital warts.

  9. 16. Copy of a post card showing the Lavelle School, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Copy of a post card showing the Lavelle School, c.1900; note that the building is one story in height and contains a one story addition in the rear. It also contains a projecting entrance tower and the windows have shutters. There are no windows or chimneys on the west wall and the front yard is defined by a wood picket fence on the west side and a metal picket fence on the north side. The identities of the children standing near the door are not known. (Copy of photo reproduced with permission from the Ashland Public Library and Mrs. Helen Edling, former Postmaster of Lavelle {she currently resides in Lavelle}; the original photograph is in Mrs. Edling's collection) - Lavelle School, Township Road 905, Main Street, Village of Lavelle, Lavelle, Schuylkill County, PA

  10. 5. Credit BG. This interior view shows the weigh room, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Credit BG. This interior view shows the weigh room, looking west (240°): Electric lighting and scale read-outs (boxes with circular windows on the wall) are fitted with explosion-proof enclosures; these enclosures prevent malfunctioning electrical parts from sparking and starting fires or explosions. One marble table and scale have been removed at the extreme left of the view. Two remaining scales handle small and large quantities of propellants and additives. Marble tables do not absorb chemicals or conduct electricity; their mass also prevents vibration from upsetting the scales. The floor has an electrically conductive coating to dissipate static electric charges, thus preventing sparks which might ignite propellants. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

  11. Polymer: bioceramic composites optimization by tetracycline addition.

    PubMed

    Pataro, André L; Oliveira, Michele F; Teixeira, Karina I R; Turchetti-Maia, Regina M M; Lopes, Miriam T P; Wykrota, Francisco H L; Sinisterra, Rubén D; Cortés, Maria E

    2007-05-04

    The aim of this study was to evaluate the biocompatibility of composites of poly-lactic acid polymer (PLA) and copolymer of lactic and glycolic acid (PLGA), dispersed in a bioceramic matrix, Osteosynt (BC), to which tetracycline (TC) was added. The in vitro test used direct contact test (ASTM F-813) and elution test (USP-XXIII, ISO 10993-5), and in vivo evaluation was performed after subcutaneous implantation in outbread Swiss mice. The 0.01% (w/w) TC addition did not affect composite cytotoxicity in vitro. The macroscopic and histologic evaluation in vivo after 1, 7, 13, 21, 28 and 56 days showed an initial intense infiltrate of inflammatory cells for most of the groups. The tissue showed normal pattern after 21 days for all the groups. TC addition exhibited significantly larger reduction of inflammation signs (Mann-Whitney test, p<0.05) in the critical period of the resolution of the inflammatory process. Angiogenesis, cellular adsorption and fibrous deposit were observed on SEM evaluation. In conclusion, TC addition optimized composites polymer/bioceramic biocompatibility, contributing to anti-inflammatory response during the early phases of the wound healing process.

  12. Additional exposures to a compound of two preexposed stimuli deepen latent inhibition.

    PubMed

    Leung, Hiu Tin; Killcross, A S; Westbrook, R Frederick

    2011-10-01

    The present experiments studied the role of error correction mechanisms in the latent inhibition of conditioned fear responses by conditioned stimulus (CS) preexposure. They demonstrated that a preexposed CS subjected to additional exposures in compound with either another preexposed stimulus or a novel stimulus was more latently inhibited than a preexposed CS which received additional exposures in isolation. They also showed that a preexposed CS subjected to additional exposures in compound with another preexposed stimulus was more latently inhibited than a preexposed CS given additional exposures in compound with a novel stimulus. These results were discussed in terms of the Hall-Rodriguez (2010) model of latent inhibition.

  13. Additional factors in chronic bronchitis.

    PubMed

    Cullen, K J; Elder, J; Adams, A R; Stenhouse, N S

    1970-02-14

    A review of persons with chronic bronchitis and controls without bronchitis showed several irritants around the home that aggravated cough, such as house dust, flowers and grasses, smoke, strong fumes, hair spray, insecticide, and soap powders. Most subjects with bronchitis were affected by exposure to one or more of these irritants for at least once a day for three months of the year or more. Out of 163 subjects with chronic bronchitis only six non-smokers were free of factors associated with pulmonary irritation. This evidence from non-smokers not exposed to air pollution adds further strength to the hypothesis that daily phlegm is caused by persistent inhalation of irritants.

  14. Responses to additional JAPC questions

    SciTech Connect

    Burke, T.M.

    1998-02-03

    The goals are to improve performance and reduce costs; the variables tested are fuel fabrication and assembly tolerances and cladding materials. Significant results are: goal lifetimes achieved; D9/HT9 alloys superior--reduced swelling potential duct mechanical attachment methods viable; test performance per design predictions.

  15. Evolution of solidification texture during additive manufacturing

    PubMed Central

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-01-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components. PMID:26553246

  16. p53 and rapamycin are additive

    PubMed Central

    Campisi, Judith; Huang, Jing; Jones, Diane; Dodds, Sherry G.; Williams, Charnae; Hubbard, Gene; Livi, Carolina B.; Gao, Xiaoli; Weintraub, Susan; Curiel, Tyler; Sharp, Z. Dave; Hasty, Paul

    2015-01-01

    Mechanistic target of rapamycin (mTOR) is a kinase found in a complex (mTORC1) that enables macromolecular synthesis and cell growth and is implicated in cancer etiology. The rapamycin-FK506 binding protein 12 (FKBP12) complex allosterically inhibits mTORC1. In response to stress, p53 inhibits mTORC1 through a separate pathway involving cell signaling and amino acid sensing. Thus, these different mechanisms could be additive. Here we show that p53 improved the ability of rapamycin to: 1) extend mouse life span, 2) suppress ionizing radiation (IR)-induced senescence-associated secretory phenotype (SASP) and 3) increase the levels of amino acids and citric acid in mouse embryonic stem (ES) cells. This additive effect could have implications for cancer treatment since rapamycin and p53 are anti-oncogenic. PMID:26158292

  17. Evolution of solidification texture during additive manufacturing

    DOE PAGES

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numericalmore » modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.« less

  18. Evolution of solidification texture during additive manufacturing

    SciTech Connect

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  19. Evolution of solidification texture during additive manufacturing.

    PubMed

    Wei, H L; Mazumder, J; DebRoy, T

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  20. Evolution of solidification texture during additive manufacturing

    NASA Astrophysics Data System (ADS)

    Wei, H. L.; Mazumder, J.; Debroy, T.

    2015-11-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  1. Does Preoperative Measurement of Cerebral Blood Flow with Acetazolamide Challenge in Addition to Preoperative Measurement of Cerebral Blood Flow at the Resting State Increase the Predictive Accuracy of Development of Cerebral Hyperperfusion after Carotid Endarterectomy? Results from 500 Cases with Brain Perfusion Single-photon Emission Computed Tomography Study

    PubMed Central

    OSHIDA, Sotaro; OGASAWARA, Kuniaki; SAURA, Hiroaki; YOSHIDA, Koji; FUJIWARA, Shunro; KOJIMA, Daigo; KOBAYASHI, Masakazu; YOSHIDA, Kenji; KUBO, Yoshitaka; OGAWA, Akira

    2015-01-01

    The purpose of the present study was to determine whether preoperative measurement of cerebral blood flow (CBF) with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of development of cerebral hyperperfusion after carotid endarterectomy (CEA). CBF at the resting state and cerebrovascular reactivity (CVR) to acetazolamide were quantitatively assessed using N-isopropyl-p-[123I]-iodoamphetamine (IMP)-autoradiography method with single-photon emission computed tomography (SPECT) before CEA in 500 patients with ipsilateral internal carotid artery stenosis (≥ 70%). CBF measurement using 123I-IMP SPECT was also performed immediately and 3 days after CEA. A region of interest (ROI) was automatically placed in the middle cerebral artery territory in the affected cerebral hemisphere using a three-dimensional stereotactic ROI template. Preoperative decreases in CBF at the resting state [95% confidence intervals (CIs), 0.855 to 0.967; P = 0.0023] and preoperative decreases in CVR to acetazolamide (95% CIs, 0.844 to 0.912; P < 0.0001) were significant independent predictors of post-CEA hyperperfusion. The area under the receiver operating characteristic curve for prediction of the development of post-CEA hyperperfusion was significantly greater for CVR to acetazolamide than for CBF at the resting state (difference between areas, 0.173; P < 0.0001). Sensitivity, specificity, and positive- and negative-predictive values for the prediction of the development of post-CEA hyperperfusion were significantly greater for CVR to acetazolamide than for CBF at the resting state (P < 0.05, respectively). The present study demonstrated that preoperative measurement of CBF with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of the development of post-CEA hyperperfusion. PMID:25746308

  2. Does preoperative measurement of cerebral blood flow with acetazolamide challenge in addition to preoperative measurement of cerebral blood flow at the resting state increase the predictive accuracy of development of cerebral hyperperfusion after carotid endarterectomy? Results from 500 cases with brain perfusion single-photon emission computed tomography study.

    PubMed

    Oshida, Sotaro; Ogasawara, Kuniaki; Saura, Hiroaki; Yoshida, Koji; Fujiwara, Shunro; Kojima, Daigo; Kobayashi, Masakazu; Yoshida, Kenji; Kubo, Yoshitaka; Ogawa, Akira

    2015-01-01

    The purpose of the present study was to determine whether preoperative measurement of cerebral blood flow (CBF) with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of development of cerebral hyperperfusion after carotid endarterectomy (CEA). CBF at the resting state and cerebrovascular reactivity (CVR) to acetazolamide were quantitatively assessed using N-isopropyl-p-[(123)I]-iodoamphetamine (IMP)-autoradiography method with single-photon emission computed tomography (SPECT) before CEA in 500 patients with ipsilateral internal carotid artery stenosis (≥ 70%). CBF measurement using (123)I-IMP SPECT was also performed immediately and 3 days after CEA. A region of interest (ROI) was automatically placed in the middle cerebral artery territory in the affected cerebral hemisphere using a three-dimensional stereotactic ROI template. Preoperative decreases in CBF at the resting state [95% confidence intervals (CIs), 0.855 to 0.967; P = 0.0023] and preoperative decreases in CVR to acetazolamide (95% CIs, 0.844 to 0.912; P < 0.0001) were significant independent predictors of post-CEA hyperperfusion. The area under the receiver operating characteristic curve for prediction of the development of post-CEA hyperperfusion was significantly greater for CVR to acetazolamide than for CBF at the resting state (difference between areas, 0.173; P < 0.0001). Sensitivity, specificity, and positive- and negative-predictive values for the prediction of the development of post-CEA hyperperfusion were significantly greater for CVR to acetazolamide than for CBF at the resting state (P < 0.05, respectively). The present study demonstrated that preoperative measurement of CBF with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of the development of post-CEA hyperperfusion.

  3. Additives In Meat and Poultry Products

    MedlinePlus

    ... What is a food additive? What is a "direct" food additive? What is an 'indirect" food additive? ... convenience foods. [ Top of Page ] What is a “direct” food additive? According to the FDA, “Direct food ...

  4. Evaluation of Additive Manufacturing for Stainless Steel Components

    SciTech Connect

    Peter, William H.; Lou, Xiaoyuan; List, III, Frederick Alyious; Webber, David

    2016-09-01

    This collaboration between Oak Ridge National Laboratory and General Electric Company aimed to evaluate the mechanical properties, microstructure, and porosity of the additively manufactured 316L stainless steel by ORNL’s Renishaw AM250 machine for nuclear application. The program also evaluated the stress corrosion cracking and corrosion fatigue crack growth rate of the same material in high temperature water environments. Results show the properties of this material to be similar to the properties of 316L stainless steel fabricated additively with equipment from other manufacturers with slightly higher porosity. The stress corrosion crack growth rate is similar to that for wrought 316L stainless steel for an oxygenated high temperature water environment and slightly higher for a hydrogenated high temperature water environment. Optimized heat treatment of this material is expected to improve performance in high temperature water environments.

  5. Addition and subtraction by students with Down syndrome

    NASA Astrophysics Data System (ADS)

    Noda Herrera, Aurelia; Bruno, Alicia; González, Carina; Moreno, Lorenzo; Sanabria, Hilda

    2011-01-01

    We present a research report on addition and subtraction conducted with Down syndrome students between the ages of 12 and 31. We interviewed a group of students with Down syndrome who executed algorithms and solved problems using specific materials and paper and pencil. The results show that students with Down syndrome progress through the same procedural levels as those without disabilities though they have difficulties in reaching the most abstract level (numerical facts). The use of fingers or concrete representations (balls) appears as a fundamental process among these students. As for errors, these vary widely depending on the students, and can be attributed mostly to an incomplete knowledge of the decimal number system.

  6. Sterols from Mytilidae show anti-aging and neuroprotective effects via anti-oxidative activity.

    PubMed

    Sun, Yujuan; Lin, Yanfei; Cao, Xueli; Xiang, Lan; Qi, Jianhua

    2014-11-25

    For screening anti-aging samples from marine natural products, K6001 yeast strain was employed as a bioassay system. The active mussel extract was separated to give an active sterol fraction (SF). SF was further purified, and four sterol compounds were obtained. Their structures were determined to be cholesterol (CHOL), brassicasterol, crinosterol, and 24-methylenecholesterol. All compounds showed similar anti-aging activity. To understand the action mechanism involved, anti-oxidative experiments, reactive oxygen species (ROS) assays, and malondialdehyde (MDA) tests were performed on the most abundant compound, CHOL. Results indicated that treatment with CHOL increases the survival rate of yeast under oxidative stress and decreases ROS and MDA levels. In addition, mutations of uth1, skn7, sod1, and sod2, which feature a K6001 background, were employed and the lifespans of the mutations were not affected by CHOL. These results demonstrate that CHOL exerts anti-aging effects via anti-oxidative stress. Based on the connection between neuroprotection and anti-aging, neuroprotective experiments were performed in PC12 cells. Paraquat was used to induce oxidative stress and the results showed that the CHOL and SF protect the PC12 cells from the injury induced by paraquat. In addition, these substance exhibited nerve growth factor (NGF) mimic activities again confirmed their neuroprotective function.

  7. Reducing of internal resistance lithium ion battery using glucose addition

    SciTech Connect

    Salim, Andri Pratama; Hafidlullah, Noor; Purwanto, Agus

    2016-02-08

    There are two indicators of battery performance, i.e : capacity and the internal resistance of battery. In this research, the affect of glucose addition to decrease the internal resistance of lithium battery was investigated. The ratio of glucose addition were varied at weight ratio 1%, 3%, and 5% and one mixtures without glucose addition. Lithium ferri phosphate (LiFePO{sub 4}), polyvinylidene fluoride (PVDF), acetylene black (AB) and glucose were materials that used in this study. Both of mixtures were mixed in the vacuum mixer until became homogeneous. The slurry was coated on an aluminium foil sheet and the coated thickness was 200 µm. The performance of battery lithium was examined by Eight Channel Battery Analyzer and the Internal resistance was examined by Internal Resistance of Battery Meter. The result from all analyzer were showed that the internal resistance reduced as well as the battery capacity. The best internal resistance value is owned by mixtures with 3wt% ratio glucose addition. It has an internal resistance value about 64 miliohm.

  8. Carrageenan as a dry strength additive for papermaking

    PubMed Central

    Liu, Zhenhua; Li, Xinping; Xie, Wei

    2017-01-01

    Carrageenans are commercially important sulfated gums found in various species of red seaweeds (Rhodophyta), wherein they serve a structural function similar to that of pectins in land plants. In this study, carrageenan was used independently or in combination with cationic polyacrylamide (CPAM) and/or Al2(SO4)3 to explore its application as a dry strength additive in papermaking. Strength index determination, ash content detection, FTIR characterization and SEM observation were performed on prepared handsheets. The results showed that with 0.6% Al2(SO4)3 and 0.2% carrageenan as additives, the tensile index increased by 13.53% and precipitated calcium carbonate (PCC) retention increased by 57.06%. With 0.6% Al2(SO4)3, 0.2% carrageenan and 0.03% CPAM as additives, PCC retention increased by 121% while the tensile index did not fall compared to handsheets without additives, indicating that carrageenan could enhance the strength of handsheets and be used as an anionic dry strength agent. PMID:28170422

  9. Discriminating additive from dynamical noise for chaotic time series.

    PubMed

    Strumik, Marek; Macek, Wiesław M; Redaelli, Stefano

    2005-09-01

    We consider the dynamics of the Hénon and Ikeda maps in the presence of additive and dynamical noise. We show that, from the point of view of computations of some statistical quantities, dynamical noise corrupting these deterministic systems can be considered effectively as an additive "pseudonoise" with the Cauchy distribution. In the case of the Hénon and Ikeda maps, this effect occurs only for one variable of the system, while the noise corrupting the second variable is still Gaussian distributed independent of distribution of dynamical noise. Based on these results and using scaling properties of the correlation entropy, we propose a simple method of discriminating additive from dynamical noise. This approach is also useful for estimation of noise level for chaotic time series. We show that the proposed method works well in a wide range of noise levels, providing that one kind of noise predominates and we analyze the variable of the system for which the contamination follows Cauchy-like distribution in the presence of dynamical noise.

  10. New ESP additive controls particulates

    SciTech Connect

    Durham, M.D.; Baldrey, K.E.; Bustard, C.J.; Martin, C.E.; Dharmarajan, N.N.

    1997-06-01

    This article reports that a conditioning agent enhanced precipitator performance after plant switched to low-sulfur coal. Firing low-sulfur coal at a power plant designed for medium- or high-sulfur coal will impact the downstream particulate control device. Since the performance of an electro-static precipitator (ESP) is a strong function of the sulfur content in the coal, switching to a low-sulfur coal will severely impact collection efficiency. Particle resistivity is the dominant parameter affecting the performance of an ESP. When the resistivity is too high, the ESP must be increased in size by a factor of two to three, resulting in proportionally increased capital and operating costs. Fly ash from low-sulfur coal is known to have a typical resistivity one or two orders of magnitude above that for ideal collection efficiency in a well-designed ESP. Therefore, when a utility burning a medium- or high-sulfur coal switches to a low-sulfur coal, the increase in particle resistivity resulting from the reduced SO{sub 3} concentration will lead to severe problems in the ESP. There have been many instances where utilities have switched from a high- to a low-sulfur coal, and the problems caused by the increased resistivity have had such a devastating effect on the performance of the ESP that emissions have increased by a factor of 10.

  11. [Information about phosphorus additives and nutritional counseling].

    PubMed

    Kido, Shinsuke; Nomura, Kengo; Sasaki, Shohei; Shiozaki, Yuji; Segawa, Hiroko; Tatsumi, Sawako

    2012-10-01

    Hyperphosphatemia is a common disorder in patients with chronic kidney disease (CKD) , and may result in hyperparathyroidism and renal osteodystrophy. Hyperphosphatemia also may contribute to deterioration vascular calcification and increase mortality. Hence, correction and prevention of hyperphosphatemia is a main component of the management of CKD. This goal is usually approached both by administering phosphorus binders and by restricting dietary phosphorus (P) intake. Dietary intake of phosphorus (P) is derived largely from foods with high protein content or food additives and is an important determinant of P balance in patient with CKD. Food additives (PO4) can dramatically increase the amount of P consumed in the daily diet, especially because P is more readily absorbed in its inorganic form. In addition, information about the P content and type in prepared foods is often unavailable or misleading. Therefore, during dietary counseling of patients with CKD, we recommended that they consider both the absolute dietary P content and the P-to-protein ratio of foods and meals including food additives.

  12. Learning from a dive show in an aquarium setting

    NASA Astrophysics Data System (ADS)

    Walsh, Lori M.

    A study was conducted at an aquarium next to a theme park to understand information recalled from two versions of shows viewed at the largest display. The goal of this research was to determine if learning was enhanced by having a diver in water as the treatment group. This project focused on the knowledge recalled about shark and ray feeding adaptations, the information recalled about the mentioned conservation message about sustainable seafood and the potential of the two shows to make memorable experiences. During the project, 30 adult participants from each group were given a survey with five open-ended questions. Results suggest that the diver might distract from biological content information, or that the diver is such a novel element that it interferes with recall. While guests seemed to recall information about rays and sharks, the amount of information was not substantial. It appears that the diver does not affect content messaging but does impact whether guests attend to Seafood Watch messaging. The diver may have been so novel that the treatment group could not attend to the conservation message that was delivered, regardless of topic, or the control group recalled the message because the guests were not distracted by the diver or feeding. The absence of a diver seems to allow the guests to better attend to what is happening outside of the tank. While adding a diver increases photo opportunities and may bring guests to a show, the results seem to indicate that it does not significantly increase recall. The results of this study show that guests in a theme park setting can recall information from an educational program. Guests may not enter this hybrid aquarium with the intention of learning, but recall, one of the components in learning, does occur.

  13. Evaluation of fuel additives for reduction of material imcompatibilities in methanol-gasoline blends

    NASA Technical Reports Server (NTRS)

    Rodriguez, C. F.; Barbee, J. G.; Knutson, W. K.; Cuellar, J. P., Jr.

    1983-01-01

    Screening tests determined the efficacy of six commercially available additives as modifiers of methanol's corrosivity toward metals and its weakening of tensile properties of nonmetals in automotive fuel systems. From the screening phase, three additives which seemed to protect some of the metals were tested in higher concentrations and binary combinations in search of optimal application conditions. Results indicate that two of the additives have protective properties and combining them increases the protection of the metals corroded by methanol-gasoline blends. Half of the metals in the tests were not corroded. Testing at recommended concentrations and then at higher concentrations and in combinations shows that the additives would have no protective or harmful effects on the nonmetals. Two additives emerged as candidates for application to the protection of metals in automotive methanol-gasoline fuel systems. The additives tested were assigned letter codes to protect their proprietary nature.

  14. Femtosecond fiber laser additive manufacturing of tungsten

    NASA Astrophysics Data System (ADS)

    Bai, Shuang; Liu, Jian; Yang, Pei; Zhai, Meiyu; Huang, Huan; Yang, Lih-Mei

    2016-04-01

    Additive manufacturing (AM) is promising to produce complex shaped components, including metals and alloys, to meet requirements from different industries such as aerospace, defense and biomedicines. Current laser AM uses CW lasers and very few publications have been reported for using pulsed lasers (esp. ultrafast lasers). In this paper, additive manufacturing of Tungsten materials is investigated by using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. Fully dense Tungsten part with refined grain and increased hardness was obtained and compared with parts made with different pulse widths and CW laser. The results are evidenced that the fs laser based AM provides more dimensions to modify mechanical properties with controlled heating, rapid melting and cooling rates compared with a CW or long pulsed laser. This can greatly benefit to the make of complicated structures and materials that could not be achieved before.

  15. Laboratory tests of sludge-control additives

    SciTech Connect

    Tatnall, R.E.

    1996-07-01

    Laboratory {open_quotes}jar{close_quotes} tests compared eleven different fuel oil and diesel fuel sludge-control additives. Factors studied included (1) ability to disperse and prevent buildup of sludge deposits on surfaces, (2) ability to protect steel from corrosion, (3) ability to inhibit growth and proliferation of bacteria, and (4) ability to disperse water. Results varied greatly, and it was found that many commercial products do not do what they claim. It is concluded that fuel retailers should not believe manufacturers` claims for their additive products, but rather should test such products themselves to be sure that the benefits of treatment are real. A simplified form of the procedure used here is proposed as one way for dealers to do such testing.

  16. Measuring political polarization: Twitter shows the two sides of Venezuela

    NASA Astrophysics Data System (ADS)

    Morales, A. J.; Borondo, J.; Losada, J. C.; Benito, R. M.

    2015-03-01

    We say that a population is perfectly polarized when divided in two groups of the same size and opposite opinions. In this paper, we propose a methodology to study and measure the emergence of polarization from social interactions. We begin by proposing a model to estimate opinions in which a minority of influential individuals propagate their opinions through a social network. The result of the model is an opinion probability density function. Next, we propose an index to quantify the extent to which the resulting distribution is polarized. Finally, we apply the proposed methodology to a Twitter conversation about the late Venezuelan president, Hugo Chávez, finding a good agreement between our results and offline data. Hence, we show that our methodology can detect different degrees of polarization, depending on the structure of the network.

  17. Diesel injector additives for a clean exhaust

    SciTech Connect

    Herbstman, S.; Virk, K.S.

    1988-08-01

    Increased public awareness of clean air is causing closer examination of potential health problems associated with diesel exhaust particulates. Recently, the EPA published standards mandating a sixfold reduction in diesel exhaust particulates for heavy duty engines from 0.60 gm/bhp-hr in 1988-1990 to 0.10 gm/bhp-hr in 1994. NOx exhaust concentrations were also reduced. For some time now, we have been interested in ways to reduce black smoke from diesel engines since it is one of the prime contributors to exhaust particulates. One of its causes is dirty or clogged fuel injectors due to deposit buildup. During operation with dirty injectors, the spray pattern of fuel into the combustion chamber is distorted, usually resulting in a fuel-rich environment. Incomplete burning of the rich fuel mixture results in an excess of carbonaceous material which is discharged in the exhaust as black smoke. We are engaged in evaluating additives with detergency and antioxidant properties to reduce deposit buildup in the injectors. Long chain alkylamines, and other types of surfactant molecules have been reported as active in preventing deposit buildup. However, little practical information was available concerning structure-activity relationships for use in developing a commercially acceptable additive package. We decided to investigate additives which are active either as gasoline carburetor detergents or as lubricant dispersants; both categories appear to have the necessary surfactant behavior and oil solubility to satisfy our needs for a diesel injector keep clean agent. Our approach to the problem was to develop an additive package for future use in Texaco fuels to reduce black smoke.

  18. Bonobos (Pan paniscus) show an attentional bias toward conspecifics’ emotions

    PubMed Central

    Kret, Mariska E.; Jaasma, Linda; Bionda, Thomas; Wijnen, Jasper G.

    2016-01-01

    In social animals, the fast detection of group members’ emotional expressions promotes swift and adequate responses, which is crucial for the maintenance of social bonds and ultimately for group survival. The dot-probe task is a well-established paradigm in psychology, measuring emotional attention through reaction times. Humans tend to be biased toward emotional images, especially when the emotion is of a threatening nature. Bonobos have rich, social emotional lives and are known for their soft and friendly character. In the present study, we investigated (i) whether bonobos, similar to humans, have an attentional bias toward emotional scenes compared with conspecifics showing a neutral expression, and (ii) which emotional behaviors attract their attention the most. As predicted, results consistently showed that bonobos’ attention was biased toward the location of the emotional versus neutral scene. Interestingly, their attention was grabbed most by images showing conspecifics such as sexual behavior, yawning, or grooming, and not as much—as is often observed in humans—by signs of distress or aggression. The results suggest that protective and affiliative behaviors are pivotal in bonobo society and therefore attract immediate attention in this species. PMID:26976586

  19. Bonobos (Pan paniscus) show an attentional bias toward conspecifics' emotions.

    PubMed

    Kret, Mariska E; Jaasma, Linda; Bionda, Thomas; Wijnen, Jasper G

    2016-04-05

    In social animals, the fast detection of group members' emotional expressions promotes swift and adequate responses, which is crucial for the maintenance of social bonds and ultimately for group survival. The dot-probe task is a well-established paradigm in psychology, measuring emotional attention through reaction times. Humans tend to be biased toward emotional images, especially when the emotion is of a threatening nature. Bonobos have rich, social emotional lives and are known for their soft and friendly character. In the present study, we investigated (i) whether bonobos, similar to humans, have an attentional bias toward emotional scenes compared with conspecifics showing a neutral expression, and (ii) which emotional behaviors attract their attention the most. As predicted, results consistently showed that bonobos' attention was biased toward the location of the emotional versus neutral scene. Interestingly, their attention was grabbed most by images showing conspecifics such as sexual behavior, yawning, or grooming, and not as much-as is often observed in humans-by signs of distress or aggression. The results suggest that protective and affiliative behaviors are pivotal in bonobo society and therefore attract immediate attention in this species.

  20. Deaf Individuals Show a Leftward Bias in Numerical Bisection.

    PubMed

    Cattaneo, Zaira; Cecchetto, Carlo; Papagno, Costanza

    2016-01-01

    Consistent evidence suggests that deaf individuals conceive of numerical magnitude as a left-to-right-oriented mental number line, as typically observed in hearing individuals. When accessing this spatial representation of numbers, normally hearing individuals typically show an attentional bias to the left (pseudoneglect), resembling the attentional bias they show in physical space. Deaf individuals do not show pseudoneglect in representing external space, as assessed by a visual line bisection task. However, whether deaf individuals show attentional biases in representing numerical space has never been investigated before. Here we instructed groups of deaf and hearing individuals to quickly estimate (without calculating) the midpoint of a series of numerical intervals presented in ascending and descending order. Both hearing and deaf individuals were significantly biased toward lower numbers (i.e., the leftward side of the mental number line) in their estimations. Nonetheless, the underestimation bias was smaller in deaf individuals than in the hearing when bisecting pairs of numbers given in descending order. This result may depend on the use of different strategies by deaf and hearing participants or a less pronounced lateralization of deaf individuals in the control of spatial attention.

  1. Human DEAD-box ATPase DDX3 shows a relaxed nucleoside substrate specificity.

    PubMed

    Franca, Raffaella; Belfiore, Amalia; Spadari, Silvio; Maga, Giovanni

    2007-06-01

    Human DDX3 (hDDX3) is a DEAD-box protein shown to possess RNA-unwinding and adenosine triphosphatase (ATPase) activities. The hDDX3 protein has been implicated in nuclear mRNA export, cell growth control, and cancer progression. In addition, a role of this protein in the replication of human immunodeficiency virus Type 1 and in the pathogenesis of hepatitis C virus has been recently proposed. Its enzymological properties, however, are largely unknown. In this work, we characterized its ATPase activity. We show that hDDX3 ATPase activity is stimulated by various ribo- and deoxynucleic acids. Comparative analysis with different nucleoside triphosphate analogs showed that the hDDX3 ATPase couples high catalytic efficiency to a rather relaxed substrate specificity, both in terms of base selection and sugar selection. In addition, its ability to recognize the L-stereoisomers of both 3' deoxy- and 2',3' dideoxy-ribose, points to a relaxed stereoselectivity. On the basis of these results, we hypothesize the presence of structural determinants on both the base and the sugar moieties, critical for nucleoside binding to the enzyme. Our results expand the knowledge about the DEAD-box RNA helicases in general and can be used for rational design of selective inhibitors of hDDX3, to be tested as potential antitumor and antiviral agents.

  2. Milky Way Monster Stars in Cosmic Reality Show

    NASA Astrophysics Data System (ADS)

    2003-01-01

    faint streak of X-rays about 1 light-year long has been discovered 1.5 light years from Sgr A*. The streak points at Sgr A*, suggesting that it may be a jet of particles expelled at nearly the speed of light from just outside the event horizon of the black hole. The intensity and size of this jet indicate that the flaring activity has been occurring for many years. Labeled image of Sagittarius A* Jet Labeled image of Sagittarius A* Jet On a much larger scale, huge lobes of 20-million-degree-Centigrade gas extending over dozens of light years on either side of the black hole have also been discovered. "These lobes show that enormous explosions have occurred several times over the last ten thousand years," said Mark Morris of UCLA, lead author of a second paper on Sgr A*, who also participated in the press conference. Sangwook Park, of Penn State University in University Park, and Michael Muno, of MIT, were lead authors of two other papers presented at the meeting. These papers focused on the extraordinarily rich region around the central black hole, where they detected more than 2,000 X-ray sources. Other members of the team include Mark Bautz and George Ricker of MIT, Niel Brandt, Patrick Broos, George Chartas, Eric Feigelson, Gordon Garmire, and Leisa Townsley of Penn State, Yoshitomo Maeda of the Institute of Space and Astronautical Science in Japan, and Christian Howard of UCLA. NASA's Marshall Space Flight Center in Huntsville, Ala., manages the Chandra program, and TRW, Inc., Redondo Beach, Calif., is the prime contractor for the spacecraft. The Smithsonian's Chandra X-ray Center controls science and flight operations from Cambridge, Mass., for the Office of Space Science at NASA Headquarters, Washington. Images and additional information about this result are available at: http://chandra.harvard.edu and http://chandra.nasa.gov

  3. Emotional contagion: dogs and humans show a similar physiological response to human infant crying.

    PubMed

    Yong, Min Hooi; Ruffman, Ted

    2014-10-01

    Humans respond to an infant crying with an increase in cortisol level and heightened alertness, a response interpreted as emotional contagion, a primitive form of empathy. Previous results are mixed when examining whether dogs might respond similarly to human distress. We examined whether domestic dogs, which have a long history of affiliation with humans, show signs of emotional contagion, testing canine (n=75) and human (n=74) responses to one of three auditory stimuli: a human infant crying, a human infant babbling, and computer-generated "white noise", with the latter two stimuli acting as controls. Cortisol levels in both humans and dogs increased significantly from baseline only after listening to crying. In addition, dogs showed a unique behavioral response to crying, combining submissiveness with alertness. These findings suggest that dogs experience emotional contagion in response to human infant crying and provide the first clear evidence of a primitive form of cross-species empathy.

  4. Face and body recognition show similar improvement during childhood.

    PubMed

    Bank, Samantha; Rhodes, Gillian; Read, Ainsley; Jeffery, Linda

    2015-09-01

    Adults are proficient in extracting identity cues from faces. This proficiency develops slowly during childhood, with performance not reaching adult levels until adolescence. Bodies are similar to faces in that they convey identity cues and rely on specialized perceptual mechanisms. However, it is currently unclear whether body recognition mirrors the slow development of face recognition during childhood. Recent evidence suggests that body recognition develops faster than face recognition. Here we measured body and face recognition in 6- and 10-year-old children and adults to determine whether these two skills show different amounts of improvement during childhood. We found no evidence that they do. Face and body recognition showed similar improvement with age, and children, like adults, were better at recognizing faces than bodies. These results suggest that the mechanisms of face and body memory mature at a similar rate or that improvement of more general cognitive and perceptual skills underlies improvement of both face and body recognition.

  5. Variation in the peacock's train shows a genetic component.

    PubMed

    Petrie, Marion; Cotgreave, Peter; Pike, Thomas W

    2009-01-01

    Female peafowl (Pavo cristatus) show a strong mating preference for males with elaborate trains. This, however, poses something of a paradox because intense directional selection should erode genetic variation in the males' trains, so that females will no longer benefit by discriminating among males on the basis of these traits. This situation is known as the 'lek paradox', and leads to the theoretical expectation of low heritability in the peacock's train. We used two independent breeding experiments, involving a total of 42 sires and 86 of their male offspring, to estimate the narrow sense heritabilities of male ornaments and other morphometric traits. Contrary to expectation, we found significant levels of heritability in a trait known to be used by females during mate choice (train length), while no significant heritabilities were evident for other, non-fitness related morphological traits (tarsus length, body weight or spur length). This study adds to the building body of evidence that high levels of additive genetic variance can exist in secondary sexual traits under directional selection, but further emphasizes the main problem of what maintains this variation.

  6. Borrelia burgdorferi shows specificity of binding to glycosphingolipids.

    PubMed Central

    Backenson, P B; Coleman, J L; Benach, J L

    1995-01-01

    Live but not fixed or heat-killed Borrelia burgdorferi bound to galactocerebroside, lactosylceramide, and ceramide trihexoside. In addition, this organism bound to the disialoganglioside GD1a and the trisialoganglioside GT1b but not to gangliosides GM1, GD1b, GM2, and GM3 and not to asialo GM1. This adhesion pattern confirmed earlier findings of binding to galactocerebroside and places this organism within a prokaryotic group which binds to lactosylceramide. The binding to GD1a and GT1b, both of which carry terminal as well as multiple sialic acids, indicates that B. burgdorferi can show specificity of binding within a group of acidic gangliosides. Adhesion could not be inhibited by several concentrations of sugars and sialic acid, indicating more complex binding requirements than for terminal carbohydrates alone. Low-passage strains adhered to the four substrates in greater numbers than strains in culture for long periods of time. OspB mutants in general bound better or at least equally well to several of the glycosphingolipids, and preincubation of substrates with soluble recombinant and affinity-purified Osp did not inhibitor or weakly inhibited the binding of the organisms. These findings suggest that outer surface lipoproteins A and B are not directly involved in adhesion to glycosphingolipids. PMID:7622201

  7. Fouling control in seawater by on-line acid addition

    SciTech Connect

    Salvago, G.; Taccani, G.; Polimeni, R.; Fumagalli, G.; Picenoni, D.

    1996-11-01

    An experimental plant was set up containing once-through test lines supplied with seawater. The pH level of the seawater was maintained at 6.3 by the acids addition. Heat exchange monitoring equipment and channels exposing different metal specimens were installed on each of the lines. Observation by microscope and EDS analyses were carried out both on the specimen surfaces and on the cross section of the fouling after fracturing in liquid N{sub 2}. The results obtained show that: fouling must not be confused with its effects or simply with its biological components; acidifying seawater can prevent the resistance to heat exchange from increasing without impeding its biological activity. Observation by microscope of the fouling cross sections showed that in untreated seawater the foulings on stainless steel were composed of a continuous compact layer, covered by disorderly clusters. These compact layers were found to contain high quantities of corrosion products of the metals. Elements typical of corrosion products of ferrous materials (Fe, Mn) were also found on Pt, copper alloys and plastic materials. The addition of HCl or H{sub 2}SO{sub 4} to the seawater, to bring it to pH 6.3, reduces the amount of fouling adhering to the surfaces, prevents the development of the continuous layer containing iron and prevents significant increases in heat exchange resistance. The addition of CO{sub 2} can encourage the development of incoherent fibrous material with high Si content and low Fe content which is of little impediment to heat exchange. The addition of lactic acid can encourage both the abnormal development of biomass and the formation of several, separate, layers on stainless steel surfaces.

  8. Feeding practice and influence on selected blood parameters in show jumping horses competing in Switzerland.

    PubMed

    Brunner, J; Liesegang, A; Weiss, S; Wichert, B

    2015-08-01

    The aim of this study was to compare the nutritional management of show jumping horses in practice with recommendations from the literature. Additionally, the effects of these feeding practices on several blood metabolic parameters before and after exercise were studied. Blood samples were collected in the field from 27 different horses at 71 trials on the level M1 to S2 show jumping competitions in Switzerland and questionnaires on feeding practice of the studied horses were evaluated. The questionnaires revealed that during training and on tournament days horses received on average 3.1 kg of concentrate per day (min. 2.0 kg, max. 6.6 kg) divided into two to three meals. The horses were fed on average 6.9 kg of roughage per day (min. 4.0 kg, max. 13.0 kg). Additionally, it was observed that the horses received the last meal on average 6 h 10 min (min. 1 h 50 min, max. 12 h 30 min) before the start of the first show jumping turn, respectively, 7 h 30 min (min 1 h 50 min, max. 13 h 0 min) before the second turn. Seven horses (35%) had access to hay waiting in the trailer between two turns. The statistical analysis revealed no significant influence of the concentrate feeding time point on lactate, triglyceride and insulin levels, but a significant influence on free fatty acids (FFA) and blood glucose concentrations. Roughage feeding of the show jumping horses 2-4 h prior to exercise revealed the most remarkable changes in blood parameters during the show jumping course. These results received under field conditions should be approved in future under standardized conditions.

  9. INTERIOR VIEW SHOWING QBOP FURNACE IN BLOW. OXYGEN AND NATURAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW SHOWING Q-BOP FURNACE IN BLOW. OXYGEN AND NATURAL GAS ARE BLOWN INTO THE FURNACE THROUGH THE TUYERES TO CHARGE 460,000 LBS. OF HOT METAL, 100,000 LBS. OF SCRAP WITH 30,000 LBS. OF LIME. BLOW TIME IS 16 MINUTES. THE TIME TO BLOW AND TAP THE FURNACES OF THE RESULTING 205,000 TONS OF STEEL AND SLAG IS 35 MINUTES. - U.S. Steel, Fairfield Works, Q-Bop Furnace, North of Valley Road & West of Ensley, Pleasant Grove Road, Fairfield, Jefferson County, AL

  10. Overview of Food Ingredients, Additives and Colors

    MedlinePlus

    ... pesticides where other legal premarket approval requirements apply. Direct food additives are those that are added to ... and other foods to add texture -- is a direct additive. Most direct additives are identified on the ...

  11. Stability, cytotoxicity and cell uptake of water-soluble dendron–conjugated gold nanoparticles with 3, 12 and 17 nm cores† †Electronic supplementary information (ESI) available: Additional characterization methods and procedures in addition to the data for the characterization of glutathione-capped gold nanoparticles and dendron-conjugated gold nanoparticles including FT-IR spectra (Fig. S1 and S2), UV-vis spectra (Fig. S3 and S6), TEM images (Fig. S4), MALDI-TOF/TOF spectra (Fig. S5), fluorescence spectra (Fig. S6 and S7), In vitro cytotoxic assay results (Fig. S9) and ICP-MS results (Tables 1 and 2). DOI: 10.1039/c5tb00608b Click here for additional data file.

    PubMed Central

    Deol, Suprit; Weerasuriya, Nisala

    2015-01-01

    This article describes the synthesis of water-soluble dendron–conjugated gold nanoparticles (Den–AuNPs) with various average core sizes and the evaluation of stability, cytotoxicity, cell permeability and uptake of these materials. The characterization of Den–AuNPs using various techniques including transmission electron microscopy (TEM), matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF-MS), 1H NMR, FT-IR, and UV-vis spectroscopy confirms the dendron conjugation to the glutathione-capped gold nanoparticles (AuNPs). The stability of AuNPs and Den–AuNPs in solutions of different pH and salt concentration is determined by monitoring the changes in surface plasmon bands of gold using UV-vis spectroscopy. The stability of Den–AuNPs at different pH remained about the same compared to that of AuNPs. In comparison, the Den–AuNPs are found to be more stable than the precursor AuNPs maintaining their solubility in the aqueous solution with the salt concentration of up to 100 mM. The improved stability of Den–AuNPs suggests that the post-functionalization of thiol-capped gold nanoparticle surfaces with dendrons can further improve the physiological stability and biocompatibility of gold nanoparticle-based materials. Cytotoxicity studies of AuNPs and Den–AuNPs with and without fluorophores are also performed by examining cell viability for 3T3 fibroblasts using a MTT cell proliferation assay. The conjugation of dendrons to the AuNPs with a fluorophore is able to decrease the cytotoxicity brought about by the fluorophore. The successful uptake of Den–AuNPs in mouse fibroblast 3T3 cells shows the physiological viability of the hybrid materials. PMID:26366289

  12. Bubble formation in additive manufacturing of glass

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Peters, Daniel C.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-05-01

    Bubble formation is a common problem in glass manufacturing. The spatial density of bubbles in a piece of glass is a key limiting factor to the optical quality of the glass. Bubble formation is also a common problem in additive manufacturing, leading to anisotropic material properties. In glass Additive Manufacturing (AM) two separate types of bubbles have been observed: a foam layer caused by the reboil of the glass melt and a periodic pattern of bubbles which appears to be unique to glass additive manufacturing. This paper presents a series of studies to relate the periodicity of bubble formation to part scan speed, laser power, and filament feed rate. These experiments suggest that bubbles are formed by the reboil phenomena why periodic bubbles result from air being trapped between the glass filament and the substrate. Reboil can be detected using spectroscopy and avoided by minimizing the laser power while periodic bubbles can be avoided by a two-step laser melting process to first establish good contact between the filament and substrate before reflowing the track with higher laser power.

  13. Laser Additive Manufacturing of Magnetic Materials

    NASA Astrophysics Data System (ADS)

    Mikler, C. V.; Chaudhary, V.; Borkar, T.; Soni, V.; Jaeger, D.; Chen, X.; Contieri, R.; Ramanujan, R. V.; Banerjee, R.

    2017-03-01

    While laser additive manufacturing is becoming increasingly important in the context of next-generation manufacturing technologies, most current research efforts focus on optimizing process parameters for the processing of mature alloys for structural applications (primarily stainless steels, titanium base, and nickel base alloys) from pre-alloyed powder feedstocks to achieve properties superior to conventionally processed counterparts. However, laser additive manufacturing or processing can also be applied to functional materials. This article focuses on the use of directed energy deposition-based additive manufacturing technologies, such as the laser engineered net shaping (LENS™) process, to deposit magnetic alloys. Three case studies are presented: Fe-30 at.%Ni, permalloys of the type Ni-Fe-V and Ni-Fe-Mo, and Fe-Si-B-Cu-Nb (derived from Finemet) alloys. All these alloys have been processed from a blend of elemental powders used as the feedstock, and their resultant microstructures, phase formation, and magnetic properties are discussed in this paper. Although these alloys were produced from a blend of elemental powders, they exhibited relatively uniform microstructures and comparable magnetic properties to those of their conventionally processed counterparts.

  14. Ionic liquids as lubricant additives: A review

    DOE PAGES

    Zhou, Yan; Qu, Jun

    2016-12-28

    In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication withmore » an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.« less

  15. Ionic liquids as lubricant additives: A review

    SciTech Connect

    Zhou, Yan; Qu, Jun

    2016-12-28

    In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication with an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.

  16. Uniform Additivity in Classical and Quantum Information

    NASA Astrophysics Data System (ADS)

    Cross, Andrew; Li, Ke; Smith, Graeme

    2017-01-01

    Information theory quantifies the optimal rates of resource interconversions, usually in terms of entropies. However, nonadditivity often makes evaluating entropic formulas intractable. In a few auspicious cases, additivity allows a full characterization of optimal rates. We study uniform additivity of formulas, which is easily evaluated and captures all known additive quantum formulas. Our complete characterization of uniform additivity exposes an intriguing new additive quantity and identifies a remarkable coincidence—the classical and quantum uniformly additive functions with one auxiliary variable are identical.

  17. PDII- Additional discussion of the dynamic aperture

    SciTech Connect

    Norman M. Gelfand

    2002-07-23

    This note is in the nature of an addition to the dynamic aperture calculations found in the report on the Proton Driver, FERMILAB-TM-2169. A extensive discussion of the Proton Driver lattice, as well as the nomenclature used to describe it can be found in TM-2169. Basically the proposed lattice is a racetrack design with the two arcs joined by two long straight sections. The straight sections are dispersion free. Tracking studies were undertaken with the objective of computing the dynamic aperture for the lattice and some of the results have been incorporated into TM-2169. This note is a more extensive report of those calculations.

  18. Patients' perceptions of physicians: a pilot study of the influence of prime-time fictional medical shows.

    PubMed

    Stinson, Mary Elizabeth; Heischmidt, Kenneth

    2012-01-01

    Much criticism has fallen onto prime-time crime shows for skewing the perception the public has on crime. Could the same criticism apply to prime-time medical dramas, which tend to be among the most watched television shows today, for skewing patients' expectations? In the past, physicians on prime-time fictional medical shows tended to be depicted in a positive manner. However, today's medical dramas often portray physicians in a less positive context. The results of this study showed that television exposure only negatively affect patients' perceptions of physicians in regards to physical attractiveness and character, but not to physician propriety, power, communication, sociability, extroversion, competence, and composure. In addition, this study showed that prime-time fictional shows affect patient-physician interactions.

  19. SUMOylated IRF-1 shows oncogenic potential by mimicking IRF-2

    SciTech Connect

    Park, Sun-Mi; Chae, Myounghee; Kim, Bo-Kyoung; Seo, Taegun; Jang, Ik-Soon; Choi, Jong-Soon; Kim, Il-Chul; Lee, Je-Ho; Park, Junsoo

    2010-01-01

    Interferon regulatory factor-1 (IRF-1) is an interferon-induced transcriptional activator that suppresses tumors by impeding cell proliferation. Recently, we demonstrated that the level of SUMOylated IRF-1 is elevated in tumor cells, and that SUMOylation of IRF-1 attenuates its tumor-suppressive function. Here we report that SUMOylated IRF-1 mimics IRF-2, an antagonistic repressor, and shows oncogenic potential. To demonstrate the role of SUMOylated IRF-1 in tumorigenesis, we used SUMO-IRF-1 recombinant protein. Stable expression of SUMO-IRF-1 in NIH3T3 cells resulted in focus formation and anchorage-independent growth in soft agar. Inoculation of SUMO-IRF-1-transfected cells into athymic nude mice resulted in tumor formation and infiltration of adipose tissues. Finally, we demonstrated that SUMO-IRF-1 transforms NIH3T3 cells in a dose-dependent manner suggesting that SUMOylated IRF-1 may act as an oncogenic protein in tumor cells.

  20. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  1. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  2. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  3. 40 CFR 262.43 - Additional reporting.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE Recordkeeping and Reporting § 262.43 Additional... require generators to furnish additional reports concerning the quantities and disposition of...

  4. 40 CFR 262.43 - Additional reporting.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE Recordkeeping and Reporting § 262.43 Additional... require generators to furnish additional reports concerning the quantities and disposition of...

  5. 40 CFR 262.43 - Additional reporting.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE Recordkeeping and Reporting § 262.43 Additional... require generators to furnish additional reports concerning the quantities and disposition of...

  6. 40 CFR 262.43 - Additional reporting.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE Recordkeeping and Reporting § 262.43 Additional... require generators to furnish additional reports concerning the quantities and disposition of...

  7. 40 CFR 262.43 - Additional reporting.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE Recordkeeping and Reporting § 262.43 Additional... require generators to furnish additional reports concerning the quantities and disposition of...

  8. Additive Manufacturing for Affordable Rocket Engines

    NASA Technical Reports Server (NTRS)

    West, Brian; Robertson, Elizabeth; Osborne, Robin; Calvert, Marty

    2016-01-01

    Additive manufacturing (also known as 3D printing) technology has the potential to drastically reduce costs and lead times associated with the development of complex liquid rocket engine systems. NASA is using 3D printing to manufacture rocket engine components including augmented spark igniters, injectors, turbopumps, and valves. NASA is advancing the process to certify these components for flight. Success Story: MSFC has been developing rocket 3D-printing technology using the Selective Laser Melting (SLM) process. Over the last several years, NASA has built and tested several injectors and combustion chambers. Recently, MSFC has 3D printed an augmented spark igniter for potential use the RS-25 engines that will be used on the Space Launch System. The new design is expected to reduce the cost of the igniter by a factor of four. MSFC has also 3D printed and tested a liquid hydrogen turbopump for potential use on an Upper Stage Engine. Additive manufacturing of the turbopump resulted in a 45% part count reduction. To understanding how the 3D printed parts perform and to certify them for flight, MSFC built a breadboard liquid rocket engine using additive manufactured components including injectors, turbomachinery, and valves. The liquid rocket engine was tested seven times in 2016 using liquid oxygen and liquid hydrogen. In addition to exposing the hardware to harsh environments, engineers learned to design for the new manufacturing technique, taking advantage of its capabilities and gaining awareness of its limitations. Benefit: The 3D-printing technology promises reduced cost and schedule for rocket engines. Cost is a function of complexity, and the most complicated features provide the largest opportunities for cost reductions. This is especially true where brazes or welds can be eliminated. The drastic reduction in part count achievable with 3D printing creates a waterfall effect that reduces the number of processes and drawings, decreases the amount of touch

  9. EU assessment of enterococci as feed additives.

    PubMed

    Becquet, Philippe

    2003-12-01

    Particular micro-organisms such as enterococcal strains are used as probiotics in feed. Observations indicate a positive effect of such strains on the gut flora, especially for young animals or during feed transition phases. This favourable effect is perceived by the farmers as a means of maintenance of the health status of the animals (e.g. less diarrhoea) and results in significant improvement of animal performance. Micro-organisms have been used since the end of the 1980s in animal feeds and were strictly regulated in 1993, when they were introduced under the scope of Council Directive 70/524/EEC of 23 November 1970 on additives in animal nutrition on feed additives. After a transition period, which ended in the year 2000, every microbial strain must now be assessed by the EU bodies and authorised by a Commission Regulation, before it can be placed on the market for use in feedingstuffs. Council Directive 70/524/EEC on feed additives is based on three main principles: (1) pre-market authorisation, (2) positive list principle, and (3) thorough risk assessment of the effect of a particular strain on human and animal health as well as on the environment. Therefore, before introducing a new enterococcal strain preparation or promote a new use of an approved product, a dossier has to be submitted to the authorities, following the guidelines, as published in Commission Directive 94/40/EEC [Commission Directive 94/40/EC of 22 July 1994 amending Council Directive 87/153/EEC fixing guidelines for the assessment of additives in animal nutrition]. These guidelines contain detailed evaluation methods. The safety requirements refer to (1) the target animal categories, (2) the consumer and the environment (presence of toxins and virulence factors as well as antibiotic resistance and transferability are assessed), and (3) the workers, based on requirements of Council Directive 89/391/EEC.

  10. Minimum Additive Waste Stabilization (MAWS). Technology summary

    SciTech Connect

    Not Available

    1994-02-01

    In the Minimum Additive Waste Stabilization(MAWS) concept, actual waste streams are utilized as additive resources for vitrification, which may contain the basic components (glass formers and fluxes) for making a suitable glass or glassy slag. If too much glass former is present, then the melt viscosity or temperature will be too high for processing; while if there is too much flux, then the durability may suffer. Therefore, there are optimum combinations of these two important classes of constituents depending on the criteria required. The challenge is to combine these resources in such a way that minimizes the use of non-waste additives yet yields a processable and durable final waste form for disposal. The benefit to this approach is that the volume of the final waste form is minimized (waste loading maximized) since little or no additives are used and vitrification itself results in volume reduction through evaporation of water, combustion of organics, and compaction of the solids into a non-porous glass. This implies a significant reduction in disposal costs due to volume reduction alone, and minimizes future risks/costs due to the long term durability and leach resistance of glass. This is accomplished by using integrated systems that are both cost-effective and produce an environmentally sound waste form for disposal. individual component technologies may include: vitrification; thermal destruction; soil washing; gas scrubbing/filtration; and, ion-exchange wastewater treatment. The particular combination of technologies will depend on the waste streams to be treated. At the heart of MAWS is vitrification technology, which incorporates all primary and secondary waste streams into a final, long-term, stabilized glass wasteform. The integrated technology approach, and view of waste streams as resources, is innovative yet practical to cost effectively treat a broad range of DOE mixed and low-level wastes.

  11. Eccentric muscle challenge shows osteopontin polymorphism modulation of muscle damage.

    PubMed

    Barfield, Whitney L; Uaesoontrachoon, Kitipong; Wu, Chung-Sheih; Lin, Stephen; Chen, Yue; Wang, Paul C; Kanaan, Yasmine; Bond, Vernon; Hoffman, Eric P

    2014-08-01

    A promoter polymorphism of the osteopontin (OPN) gene (rs28357094) has been associated with multiple inflammatory states, severity of Duchenne muscular dystrophy (DMD) and muscle size in healthy young adults. We sought to define the mechanism of action of the polymorphism, using allele-specific in vitro reporter assays in muscle cells, and a genotype-stratified intervention in healthy controls. In vitro reporter constructs showed the G allele to respond to estrogen treatment, whereas the T allele showed no transcriptional response. Young adult volunteers (n = 187) were enrolled into a baseline study, and subjects with specific rs28357094 genotypes enrolled into an eccentric muscle challenge intervention [n = 3 TT; n = 3 GG/GT (dominant inheritance model)]. Female volunteers carrying the G allele showed significantly greater inflammation and increased muscle volume change as determined by magnetic resonance imaging T1- and T2-weighted images after eccentric challenge, as well as greater decrement in biceps muscle force. Our data suggest a model where the G allele enables enhanced activities of upstream enhancer elements due to loss of Sp1 binding at the polymorphic site. This results in significantly greater expression of the pro-inflammatory OPN cytokine during tissue remodeling in response to challenge in G allele carriers, promoting muscle hypertrophy in normal females, but increased damage in DMD patients.

  12. The postmitotic Saccharomyces cerevisiae after spaceflight showed higher viability

    NASA Astrophysics Data System (ADS)

    Yi, Zong-Chun; Li, Xiao-Fei; Wang, Yan; Wang, Jie; Sun, Yan; Zhuang, Feng-Yuan

    2011-06-01

    The budding yeast Saccharomyces cerevisiae has been proposed as an ideal model organism for clarifying the biological effects caused by spaceflight conditions. The postmitotic S. cerevisiae cells onboard Practice eight recoverable satellite were subjected to spaceflight for 15 days. After recovery, the viability, the glycogen content, the activities of carbohydrate metabolism enzymes, the DNA content and the lipid peroxidation level in yeast cells were analyzed. The viability of the postmitotic yeast cells after spaceflight showed a three-fold increase as compared with that of the ground control cells. Compared to the ground control cells, the lipid peroxidation level in the spaceflight yeast cells markedly decreased. The spaceflight yeast cells also showed an increase in G2/M cell population and a decrease in Sub-G1 cell population. The glycogen content and the activities of hexokinase and succinate dehydrogenase significantly decreased in the yeast cells after spaceflight. In contrast, the activity of malate dehydrogenase showed an obvious increase after spaceflight. These results suggested that microgravity or spaceflight could promote the survival of postmitotic S. cerevisiae cells through regulating carbohydrate metabolism, ROS level and cell cycle progression.

  13. New World cattle show ancestry from multiple independent domestication events

    PubMed Central

    McTavish, Emily Jane; Decker, Jared E.; Schnabel, Robert D.; Taylor, Jeremy F.; Hillis, David M.

    2013-01-01

    Previous archeological and genetic research has shown that modern cattle breeds are descended from multiple independent domestication events of the wild aurochs (Bos primigenius) ∼10,000 y ago. Two primary areas of domestication in the Middle East/Europe and the Indian subcontinent resulted in taurine and indicine lines of cattle, respectively. American descendants of cattle brought by European explorers to the New World beginning in 1493 generally have been considered to belong to the taurine lineage. Our analyses of 47,506 single nucleotide polymorphisms show that these New World cattle breeds, as well as many related breeds of cattle in southern Europe, actually exhibit ancestry from both the taurine and indicine lineages. In this study, we show that, although European cattle are largely descended from the taurine lineage, gene flow from African cattle (partially of indicine origin) contributed substantial genomic components to both southern European cattle breeds and their New World descendants. New World cattle breeds, such as Texas Longhorns, provide an opportunity to study global population structure and domestication in cattle. Following their introduction into the Americas in the late 1400s, semiferal herds of cattle underwent between 80 and 200 generations of predominantly natural selection, as opposed to the human-mediated artificial selection of Old World breeding programs. Our analyses of global cattle breed population history show that the hybrid ancestry of New World breeds contributed genetic variation that likely facilitated the adaptation of these breeds to a novel environment. PMID:23530234

  14. PARK2 patient neuroprogenitors show increased mitochondrial sensitivity to copper.

    PubMed

    Aboud, Asad A; Tidball, Andrew M; Kumar, Kevin K; Neely, M Diana; Han, Bingying; Ess, Kevin C; Hong, Charles C; Erikson, Keith M; Hedera, Peter; Bowman, Aaron B

    2015-01-01

    Poorly-defined interactions between environmental and genetic risk factors underlie Parkinson's disease (PD) etiology. Here we tested the hypothesis that human stem cell derived forebrain neuroprogenitors from patients with known familial risk for early onset PD will exhibit enhanced sensitivity to PD environmental risk factors compared to healthy control subjects without a family history of PD. Two male siblings (SM and PM) with biallelic loss-of-function mutations in PARK2 were identified. Human induced pluripotent stem cells (hiPSCs) from SM, PM, and four control subjects with no known family histories of PD or related neurodegenerative diseases were utilized. We tested the hypothesis that hiPSC-derived neuroprogenitors from patients with PARK2 mutations would show heightened cell death, mitochondrial dysfunction, and reactive oxygen species generation compared to control cells as a result of exposure to heavy metals (PD environmental risk factors). We report that PARK2 mutant neuroprogenitors showed increased cytotoxicity with copper (Cu) and cadmium (Cd) exposure but not manganese (Mn) or methyl mercury (MeHg) relative to control neuroprogenitors. PARK2 mutant neuroprogenitors also showed a substantial increase in mitochondrial fragmentation, initial ROS generation, and loss of mitochondrial membrane potential following Cu exposure. Our data substantiate Cu exposure as an environmental risk factor for PD. Furthermore, we report a shift in the lowest observable effect level (LOEL) for greater sensitivity to Cu-dependent mitochondrial dysfunction in patients SM and PM relative to controls, correlating with their increased genetic risk for PD.

  15. New World cattle show ancestry from multiple independent domestication events.

    PubMed

    McTavish, Emily Jane; Decker, Jared E; Schnabel, Robert D; Taylor, Jeremy F; Hillis, David M

    2013-04-09

    Previous archeological and genetic research has shown that modern cattle breeds are descended from multiple independent domestication events of the wild aurochs (Bos primigenius) ∼10,000 y ago. Two primary areas of domestication in the Middle East/Europe and the Indian subcontinent resulted in taurine and indicine lines of cattle, respectively. American descendants of cattle brought by European explorers to the New World beginning in 1493 generally have been considered to belong to the taurine lineage. Our analyses of 47,506 single nucleotide polymorphisms show that these New World cattle breeds, as well as many related breeds of cattle in southern Europe, actually exhibit ancestry from both the taurine and indicine lineages. In this study, we show that, although European cattle are largely descended from the taurine lineage, gene flow from African cattle (partially of indicine origin) contributed substantial genomic components to both southern European cattle breeds and their New World descendants. New World cattle breeds, such as Texas Longhorns, provide an opportunity to study global population structure and domestication in cattle. Following their introduction into the Americas in the late 1400s, semiferal herds of cattle underwent between 80 and 200 generations of predominantly natural selection, as opposed to the human-mediated artificial selection of Old World breeding programs. Our analyses of global cattle breed population history show that the hybrid ancestry of New World breeds contributed genetic variation that likely facilitated the adaptation of these breeds to a novel environment.

  16. Lithium inclusion in indium metal-organic frameworks showing increased surface area and hydrogen adsorption

    SciTech Connect

    Bosch, Mathieu; Zhang, Muwei; Feng, Dawei; Yuan, Shuai; Wang, Xuan; Chen, Ying-Pin; Zhou, Hong-Cai

    2014-12-01

    Investigation of counterion exchange in two anionic In-Metal-Organic Frameworks (In-MOFs) showed that partial replacement of disordered ammonium cations was achieved through the pre-synthetic addition of LiOH to the reaction mixture. This resulted in a surface area increase of over 1600% in (Li [In(1,3 − BDC){sub 2}]){sub n} and enhancement of the H{sub 2} uptake of approximately 275% at 80 000 Pa at 77 K. This method resulted in frameworks with permanent lithium content after repeated solvent exchange as confirmed by inductively coupled plasma mass spectrometry. Lithium counterion replacement appears to increase porosity after activation through replacement of bulkier, softer counterions and demonstrates tuning of pore size and properties in MOFs.

  17. Children with autism spectrum disorder show reduced adaptation to number

    PubMed Central

    Turi, Marco; Burr, David C.; Igliozzi, Roberta; Aagten-Murphy, David; Muratori, Filippo; Pellicano, Elizabeth

    2015-01-01

    Autism is known to be associated with major perceptual atypicalities. We have recently proposed a general model to account for these atypicalities in Bayesian terms, suggesting that autistic individuals underuse predictive information or priors. We tested this idea by measuring adaptation to numerosity stimuli in children diagnosed with autism spectrum disorder (ASD). After exposure to large numbers of items, stimuli with fewer items appear to be less numerous (and vice versa). We found that children with ASD adapted much less to numerosity than typically developing children, although their precision for numerosity discrimination was similar to that of the typical group. This result reinforces recent findings showing reduced adaptation to facial identity in ASD and goes on to show that reduced adaptation is not unique to faces (social stimuli with special significance in autism), but occurs more generally, for both parietal and temporal functions, probably reflecting inefficiencies in the adaptive interpretation of sensory signals. These results provide strong support for the Bayesian theories of autism. PMID:26056294

  18. Highly reflective reasoners show no signs of belief inhibition.

    PubMed

    Svedholm-Häkkinen, Annika M

    2015-01-01

    The processes underlying individual differences in reasoning performance are not entirely understood. What do people who do well on reasoning tasks where beliefs and logic conflict do differently from other people? Because abundant evidence shows that even poorer reasoners detect these conflicts, it has been suggested that individual differences in reasoning performance arise from inhibition failures later in the reasoning process. The present paper argues that a minority of highly skilled reasoners may deviate from this general reasoning process from an early stage. Two studies investigated signs of belief inhibition using a lexical access paradigm (Study 1) and a negative priming paradigm (Study 2). Study 1 showed that while other people exhibited signs of belief inhibition following a belief-logic conflict, people with the highest disposition for cognitive reflection did not. In Study 2, this finding was replicated and similar results were also obtained when comparing groups with higher and lower general cognitive ability. Two possible explanations are discussed. The reasoners with a highly reflective cognitive style or high general cognitive ability may have engaged and inhibited belief processing but if so, they may have been exceptionally efficient at recovering from it, wherefore no belief inhibition effects were found. An alternative account is that these reasoners started Type 2 processing directly, without first engaging in and then inhibiting belief-based processing. Under either explanation, the results indicate that individual differences in reasoning may partly arise from differences that occur early in the reasoning process.

  19. Dogs show left facial lateralization upon reunion with their owners.

    PubMed

    Nagasawa, Miho; Kawai, Emi; Mogi, Kazutaka; Kikusui, Takefumi

    2013-09-01

    Domestic dogs demonstrate behavioral laterality in response to emotional stimuli; those responses include tail wagging and head turning. The dog is the species with the closest relationship to humans; dogs can express strong social emotions (e.g., attachment and separation anxiety) to specific persons, such as their owners. In this study, we examined whether dogs demonstrate more facial laterality when reunited with their owners than when they encounter an unfamiliar person in an unfamiliar situation. We also examined whether the observed laterality was specific to positive social stimuli (i.e., the owner) or a general response to nonsocial positive stimuli (i.e., toys). The dogs' facial expressions were recorded by a high-speed video camera during the presentation of emotional stimuli and the acceleration rates of parts of their faces were analyzed. The results showed that the left eyebrow moved more when the owner was present than at baseline. No bias in terms of eyebrow movement was observed when the dogs saw attractive toys. These results suggest that dogs show facial laterality in response to emotional stimuli. This laterality was specific to social stimuli, probably reflecting the dog's attachment to the owner.

  20. Double polymer sheathed carbon nanotube supercapacitors show enhanced cycling stability

    NASA Astrophysics Data System (ADS)

    Zhao, Wenqi; Wang, Shanshan; Wang, Chunhui; Wu, Shiting; Xu, Wenjing; Zou, Mingchu; Ouyang, An; Cao, Anyuan; Li, Yibin

    2015-12-01

    Pseudo-materials are effective in boosting the specific capacitance of supercapacitors, but during service their degradation may also be very strong, causing reduced cycling stability. Here, we show that a carbon nanotube sponge grafted by two conventional pseudo-polymer layers in sequence can serve as a porous supercapacitor electrode with significantly enhanced cycling stability compared with single polymer grafting. Creating conformal polymer coatings on the nanotube surface and the resulting double-sheath configuration are important structural factors leading to the enhanced performance. Combining different polymers as double sheaths as reported here might be a potential route to circumvent the dilemma of pseudo-materials, and to simultaneously improve the capacitance and stability for various energy storage devices.Pseudo-materials are effective in boosting the specific capacitance of supercapacitors, but during service their degradation may also be very strong, causing reduced cycling stability. Here, we show that a carbon nanotube sponge grafted by two conventional pseudo-polymer layers in sequence can serve as a porous supercapacitor electrode with significantly enhanced cycling stability compared with single polymer grafting. Creating conformal polymer coatings on the nanotube surface and the resulting double-sheath configuration are important structural factors leading to the enhanced performance. Combining different polymers as double sheaths as reported here might be a potential route to circumvent the dilemma of pseudo-materials, and to simultaneously improve the capacitance and stability for various energy storage devices. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr05978j