Science.gov

Sample records for addition significant advances

  1. Advanced Communications Architecture Demonstration Made Significant Progress

    NASA Technical Reports Server (NTRS)

    Carek, David Andrew

    2004-01-01

    Simulation for a ground station located at 44.5 deg latitude. The Advanced Communications Architecture Demonstration (ACAD) is a concept architecture to provide high-rate Ka-band (27-GHz) direct-to-ground delivery of payload data from the International Space Station. This new concept in delivering data from the space station targets scientific experiments that buffer data onboard. The concept design provides a method to augment the current downlink capability through the Tracking Data Relay Satellite System (TDRSS) Ku-band (15-GHz) communications system. The ACAD concept pushes the limits of technology in high-rate data communications for space-qualified systems. Research activities are ongoing in examining the various aspects of high-rate communications systems including: (1) link budget parametric analyses, (2) antenna configuration trade studies, (3) orbital simulations (see the preceding figure), (4) optimization of ground station contact time (see the following graph), (5) processor and storage architecture definition, and (6) protocol evaluations and dependencies.

  2. Addition of Cryoprotectant Significantly Alters the Epididymal Sperm Proteome

    PubMed Central

    Yoon, Sung-Jae; Rahman, Md Saidur; Kwon, Woo-Sung; Park, Yoo-Jin; Pang, Myung-Geol

    2016-01-01

    Although cryopreservation has been developed and optimized over the past decades, it causes various stresses, including cold shock, osmotic stress, and ice crystal formation, thereby reducing fertility. During cryopreservation, addition of cryoprotective agent (CPA) is crucial for protecting spermatozoa from freezing damage. However, the intrinsic toxicity and osmotic stress induced by CPA cause damage to spermatozoa. To identify the effects of CPA addition during cryopreservation, we assessed the motility (%), motion kinematics, capacitation status, and viability of epididymal spermatozoa using computer-assisted sperm analysis and Hoechst 33258/chlortetracycline fluorescence staining. Moreover, the effects of CPA addition were also demonstrated at the proteome level using two-dimensional electrophoresis. Our results demonstrated that CPA addition significantly reduced sperm motility (%), curvilinear velocity, viability (%), and non-capacitated spermatozoa, whereas straightness and acrosome-reacted spermatozoa increased significantly (p < 0.05). Ten proteins were differentially expressed (two decreased and eight increased) (>3 fold, p < 0.05) after CPA, whereas NADH dehydrogenase flavoprotein 2, f-actin-capping protein subunit beta, superoxide dismutase 2, and outer dense fiber protein 2 were associated with several important signaling pathways (p < 0.05). The present study provides a mechanistic basis for specific cryostresses and potential markers of CPA-induced stress. Therefore, these might provide information about the development of safe biomaterials for cryopreservation and basic ground for sperm cryopreservation. PMID:27031703

  3. Evaluation of advanced polymers for additive manufacturing

    SciTech Connect

    Rios, Orlando; Morrison, Crystal

    2015-09-01

    The goal of this Manufacturing Demonstration Facility (MDF) technical collaboration project between Oak Ridge National Laboratory (ORNL) and PPG Industries, Inc. was to evaluate the feasibility of using conventional coatings chemistry and technology to build up material layer-by-layer. The PPG-ORNL study successfully demonstrated that polymeric coatings formulations may overcome many limitations of common thermoplastics used in additive manufacturing (AM), allow lightweight nozzle design for material deposition and increase build rate. The materials effort focused on layer-by-layer deposition of coatings with each layer fusing together. The combination of materials and deposition results in an additively manufactured build that has sufficient mechanical properties to bear the load of additional layers, yet is capable of bonding across the z-layers to improve build direction strength. The formulation properties were tuned to enable a novel, high-throughput deposition method that is highly scalable, compatible with high loading of reinforcing fillers, and is inherently low-cost.

  4. Developing novel 3D antennas using advanced additive manufacturing technology

    NASA Astrophysics Data System (ADS)

    Mirzaee, Milad

    In today's world of wireless communication systems, antenna engineering is rapidly advancing as the wireless services continue to expand in support of emerging commercial applications. Antennas play a key role in the performance of advanced transceiver systems where they serve to convert electric power to electromagnetic waves and vice versa. Researchers have held significant interest in developing this crucial component for wireless communication systems by employing a variety of design techniques. In the past few years, demands for electrically small antennas continues to increase, particularly among portable and mobile wireless devices, medical electronics and aerospace systems. This trend toward smaller electronic devices makes the three dimensional (3D) antennas very appealing, since they can be designed in a way to use every available space inside the devise. Additive Manufacturing (AM) method could help to find great solutions for the antennas design for next generation of wireless communication systems. In this thesis, the design and fabrication of 3D printed antennas using AM technology is studied. To demonstrate this application of AM, different types of antennas structures have been designed and fabricated using various manufacturing processes. This thesis studies, for the first time, embedded conductive 3D printed antennas using PolyLactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for substrate parts and high temperature carbon paste for conductive parts which can be a good candidate to overcome the limitations of direct printing on 3D surfaces that is the most popular method to fabricate conductive parts of the antennas. This thesis also studies, for the first time, the fabrication of antennas with 3D printed conductive parts which can contribute to the new generation of 3D printed antennas.

  5. Multiscale and Multiphysics Modeling of Additive Manufacturing of Advanced Materials

    NASA Technical Reports Server (NTRS)

    Liou, Frank; Newkirk, Joseph; Fan, Zhiqiang; Sparks, Todd; Chen, Xueyang; Fletcher, Kenneth; Zhang, Jingwei; Zhang, Yunlu; Kumar, Kannan Suresh; Karnati, Sreekar

    2015-01-01

    The objective of this proposed project is to research and develop a prediction tool for advanced additive manufacturing (AAM) processes for advanced materials and develop experimental methods to provide fundamental properties and establish validation data. Aircraft structures and engines demand materials that are stronger, useable at much higher temperatures, provide less acoustic transmission, and enable more aeroelastic tailoring than those currently used. Significant improvements in properties can only be achieved by processing the materials under nonequilibrium conditions, such as AAM processes. AAM processes encompass a class of processes that use a focused heat source to create a melt pool on a substrate. Examples include Electron Beam Freeform Fabrication and Direct Metal Deposition. These types of additive processes enable fabrication of parts directly from CAD drawings. To achieve the desired material properties and geometries of the final structure, assessing the impact of process parameters and predicting optimized conditions with numerical modeling as an effective prediction tool is necessary. The targets for the processing are multiple and at different spatial scales, and the physical phenomena associated occur in multiphysics and multiscale. In this project, the research work has been developed to model AAM processes in a multiscale and multiphysics approach. A macroscale model was developed to investigate the residual stresses and distortion in AAM processes. A sequentially coupled, thermomechanical, finite element model was developed and validated experimentally. The results showed the temperature distribution, residual stress, and deformation within the formed deposits and substrates. A mesoscale model was developed to include heat transfer, phase change with mushy zone, incompressible free surface flow, solute redistribution, and surface tension. Because of excessive computing time needed, a parallel computing approach was also tested. In addition

  6. Statistically significant deviations from additivity: What do they mean in assessing toxicity of mixtures?

    PubMed

    Liu, Yang; Vijver, Martina G; Qiu, Hao; Baas, Jan; Peijnenburg, Willie J G M

    2015-12-01

    There is increasing attention from scientists and policy makers to the joint effects of multiple metals on organisms when present in a mixture. Using root elongation of lettuce (Lactuca sativa L.) as a toxicity endpoint, the combined effects of binary mixtures of Cu, Cd, and Ni were studied. The statistical MixTox model was used to search deviations from the reference models i.e. concentration addition (CA) and independent action (IA). The deviations were subsequently interpreted as 'interactions'. A comprehensive experiment was designed to test the reproducibility of the 'interactions'. The results showed that the toxicity of binary metal mixtures was equally well predicted by both reference models. We found statistically significant 'interactions' in four of the five total datasets. However, the patterns of 'interactions' were found to be inconsistent or even contradictory across the different independent experiments. It is recommended that a statistically significant 'interaction', must be treated with care and is not necessarily biologically relevant. Searching a statistically significant interaction can be the starting point for further measurements and modeling to advance the understanding of underlying mechanisms and non-additive interactions occurring inside the organisms. PMID:26188643

  7. Construction of databases: advances and significance in clinical research.

    PubMed

    Long, Erping; Huang, Bingjie; Wang, Liming; Lin, Xiaoyu; Lin, Haotian

    2015-12-01

    Widely used in clinical research, the database is a new type of data management automation technology and the most efficient tool for data management. In this article, we first explain some basic concepts, such as the definition, classification, and establishment of databases. Afterward, the workflow for establishing databases, inputting data, verifying data, and managing databases is presented. Meanwhile, by discussing the application of databases in clinical research, we illuminate the important role of databases in clinical research practice. Lastly, we introduce the reanalysis of randomized controlled trials (RCTs) and cloud computing techniques, showing the most recent advancements of databases in clinical research. PMID:27215009

  8. Advances in Testing the Statistical Significance of Mediation Effects

    ERIC Educational Resources Information Center

    Mallinckrodt, Brent; Abraham, W. Todd; Wei, Meifen; Russell, Daniel W.

    2006-01-01

    P. A. Frazier, A. P. Tix, and K. E. Barron (2004) highlighted a normal theory method popularized by R. M. Baron and D. A. Kenny (1986) for testing the statistical significance of indirect effects (i.e., mediator variables) in multiple regression contexts. However, simulation studies suggest that this method lacks statistical power relative to some…

  9. Clinical Significance of Additional Ablation of Atrial Premature Beats after Catheter Ablation for Atrial Fibrillation

    PubMed Central

    Kim, In-Soo; Yang, Pil-Sung; Kim, Tae-Hoon; Park, Junbeum; Park, Jin-Kyu; Uhm, Jae Sun; Joung, Boyoung; Lee, Moon Hyoung

    2016-01-01

    Purpose The clinical significance of post-procedural atrial premature beats immediately after catheter ablation for atrial fibrillation (AF) has not been clearly determined. We hypothesized that the provocation of immediate recurrence of atrial premature beats (IRAPB) and additional ablation improves the clinical outcome of AF ablation. Materials and Methods We enrolled 200 patients with AF (76.5% males; 57.4±11.1 years old; 64.3% paroxysmal AF) who underwent catheter ablation. Post-procedure IRAPB was defined as frequent atrial premature beats (≥6/min) under isoproterenol infusion (5 µg/min), monitored for 10 min after internal cardioversion, and we ablated mappable IRAPBs. Post-procedural IRAPB provocations were conducted in 100 patients. We compared the patients who showed IRAPB with those who did not. We also compared the IRAPB provocation group with 100 age-, sex-, and AF-type-matched patients who completed ablation without provocation (No-Test group). Results 1) Among the post-procedural IRAPB provocation group, 33% showed IRAPB and required additional ablation with a longer procedure time (p=0.001) than those without IRAPB, without increasing the complication rate. 2) During 18.0±6.6 months of follow-up, the patients who showed IRAPB had a worse clinical recurrence rate than those who did not (27.3% vs. 9.0%; p=0.016), in spite of additional IRAPB ablation. 3) However, the clinical recurrence rate was significantly lower in the IRAPB provocation group (15.0%) than in the No-Test group (28.0%; p=0.025) without lengthening of the procedure time or raising complication rate. Conclusion The presence of post-procedural IRAPB was associated with a higher recurrence rate after AF ablation. However, IRAPB provocation and additional ablation might facilitate a better clinical outcome. A further prospective randomized study is warranted. PMID:26632385

  10. 47 CFR 51.233 - Significant degradation of services caused by deployment of advanced services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... presumption that it is acceptable for deployment under § 51.230, the degraded service shall not prevail... deployment of advanced services. 51.233 Section 51.233 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 51.233 Significant degradation of services caused by deployment of advanced services. (a) Where...

  11. Significantly improved cyclability of lithium manganese oxide under elevated temperature by an easily oxidized electrolyte additive

    NASA Astrophysics Data System (ADS)

    Zhu, Yunmin; Rong, Haibo; Mai, Shaowei; Luo, Xueyi; Li, Xiaoping; Li, Weishan

    2015-12-01

    Spinel lithium manganese oxide, LiMn2O4, is a promising cathode for lithium ion battery in large-scale applications, because it possesses many advantages compared with currently used layered lithium cobalt oxide (LiCoO2) and olivine phosphate (LiFePO4), including naturally abundant resource, environmental friendliness and high and long work potential plateau. Its poor cyclability under high temperature, however, limits its application. In this work, we report a significant cyclability improvement of LiMn2O4 under elevated temperature by using dimethyl phenylphonite (DMPP) as an electrolyte additive. Charge/discharge tests demonstrate that the application of 0.5 wt.% DMPP yields a capacity retention improvement from 16% to 82% for LiMn2O4 after 200 cycles under 55 °C at 1 C (1C = 148 mAh g-1) between 3 and 4.5 V. Electrochemical and physical characterizations indicate that DMPP is electrochemically oxidized at the potential lower than that for lithium extraction, forming a protective cathode interphase on LiMn2O4, which suppresses the electrolyte decomposition and prevents LiMn2O4 from crystal destruction.

  12. A Review of Significant Advances in Neutron Imaging from Conception to the Present

    NASA Astrophysics Data System (ADS)

    Brenizer, J. S.

    This review summarizes the history of neutron imaging with a focus on the significant events and technical advancements in neutron imaging methods, from the first radiograph to more recent imaging methods. A timeline is presented to illustrate the key accomplishments that advanced the neutron imaging technique. Only three years after the discovery of the neutron by English physicist James Chadwick in 1932, neutron imaging began with the work of Hartmut Kallmann and Ernst Kuhn in Berlin, Germany, from 1935-1944. Kallmann and Kuhn were awarded a joint US Patent issued in January 1940. Little progress was made until the mid-1950's when Thewlis utilized a neutron beam from the BEPO reactor at Harwell, marking the beginning of the application of neutron imaging to practical applications. As the film method was improved, imaging moved from a qualitative to a quantitative technique, with applications in industry and in nuclear fuels. Standards were developed to aid in the quantification of the neutron images and the facility's capabilities. The introduction of dynamic neutron imaging (initially called real-time neutron radiography and neutron television) in the late 1970's opened the door to new opportunities and new challenges. As the electronic imaging matured, the introduction of the CCD imaging devices and solid-state light intensifiers helped address some of these challenges. Development of improved imaging devices for the medical community has had a major impact on neutron imaging. Additionally, amorphous silicon sensors provided improvements in temporal resolution, while providing a reasonably large imaging area. The development of new neutron imaging sensors and the development of new neutron imaging techniques in the past decade has advanced the technique's ability to provide insight and understanding of problems that other non-destructive techniques could not provide. This rapid increase in capability and application would not have been possible without the

  13. 47 CFR 51.233 - Significant degradation of services caused by deployment of advanced services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 3 2011-10-01 2011-10-01 false Significant degradation of services caused by... § 51.233 Significant degradation of services caused by deployment of advanced services. (a) Where a... services are being degraded does not know the precise cause of the degradation, it must notify each...

  14. 47 CFR 51.233 - Significant degradation of services caused by deployment of advanced services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 3 2012-10-01 2012-10-01 false Significant degradation of services caused by... § 51.233 Significant degradation of services caused by deployment of advanced services. (a) Where a... services are being degraded does not know the precise cause of the degradation, it must notify each...

  15. 47 CFR 51.233 - Significant degradation of services caused by deployment of advanced services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 3 2013-10-01 2013-10-01 false Significant degradation of services caused by... § 51.233 Significant degradation of services caused by deployment of advanced services. (a) Where a... services are being degraded does not know the precise cause of the degradation, it must notify each...

  16. 47 CFR 51.233 - Significant degradation of services caused by deployment of advanced services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 3 2014-10-01 2014-10-01 false Significant degradation of services caused by... § 51.233 Significant degradation of services caused by deployment of advanced services. (a) Where a... services are being degraded does not know the precise cause of the degradation, it must notify each...

  17. Prognostic Significance of p16 Expression in Advanced Cervical Cancer Treated With Definitive Radiotherapy

    SciTech Connect

    Schwarz, Julie K.; Lewis, James S.; Pfeifer, John; Huettner, Phyllis; Grigsby, Perry

    2012-09-01

    Purpose: The purpose of this study was to evaluate the prognostic significance of p16 immunohistochemistry (IHC) in patients with advanced cervical cancer treated with radiation therapy. Materials and Methods: This was a retrospective study of 126 patients with International Federation of Gynecology and Obstetrics Stages Ib1-IVb cervical cancer treated with radiation. Concurrent cisplatin chemotherapy was given to 108 patients. A tissue microarray (TMA) was constructed from the paraffin-embedded diagnostic biopsy specimens. Immunoperoxidase staining was performed on the TMA and a p16 monoclonal antibody was utilized. IHC p16 extent was evaluated and scored in quartiles: 0 = no staining, 1 = 1-25% of cells staining, 2 = 26 to 50%, 3 = 51 to 75%, and 4 = 76 to 100%. Results: The p16 IHC score was 4 in 115 cases, 3 in 1, 2 in 3 and 0 in 7. There was no relationship between p16 score and tumor histology. Patients with p16-negative tumors were older (mean age at diagnosis 65 vs. 52 years for p16-positive tumors; p = 0.01). The 5-year cause-specific survivals were 33% for p16-negative cases (score = 0) compared with 63% for p16-positive cases (scores 1, 2, 3 or 4; p = 0.07). The 5-year recurrence-free survivals were 34% for those who were p16-negative vs. 57% for those who were p16-positive (p = 0.09). In addition, patients with p16-positive tumors (score > 0) were more likely to be complete metabolic responders as assessed by the 3-month posttherapy 18 [F]-fluorodeoxyglucose positron emission tomography (FDG-PET)/computed tomograph compared with patients with p16-negative tumors (p = 0.03). Conclusion: p16 expression is predictive of improved survival outcome after chemoradiation therapy for advanced-stage invasive cervical carcinoma. Further testing will be needed to evaluate p16-negative cervical tumors.

  18. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  19. Investigation of smart inspection of critical layer reticles using additional designer data to determine defect significance

    NASA Astrophysics Data System (ADS)

    Volk, William W.; Hess, Carl; Ruch, Wayne; Yu, Zongchang; Ma, Weimin; Fisher, Lisa; Vickery, Carl; Ma, Z. Mark

    2003-12-01

    With expected implementation of low k1 lithography on 193nm scanners for 65nm node wafer production, high resolution defect inspection will be needed to insure reticle quality and reticle manufacture process monitoring. Reticle cost and reticle defectivity are both increasing with each shrink to the next node. Simultaneously, system on chip (SoC) designs are increasing in which a large area of the exposure field typically contains dummy patterns and other features which are not electrically active. Knowing which defects will electrically impact device yield and performance can improve reticle manufacturing yield and cycle time -- resulting in lower reticle costs. This investigation examines the feasibility of using additional design data layers for die-to-database reticle inspection to determine in real time the relevance of a reticle defect by its location in the device (Smart InspectionTM). The impact to data preparation and inspection throughput is evaluated. The current prototype algorithm is built on the XPA and XPE die-to-database algorithms for chrome-on-glass and EPSM reticles, respectively. The algorithms implement variable sensitivity based on the additional design data regions. During defect review the defects are intelligently binned into the different predetermined design regions. Tests show the new Smart Inspection algorithm provides the capability of using higher than normal sensitivity in critical regions while reducing sensitivity in less critical regions to filter total defect counts and allow for the review of just defects that matter. Performance characterization of a variable sensitivity Smart Inspection algorithm is discussed in addition to the filtering of the total defect count during review to show the defects that matter to device performance. Using seven critical layer production reticles from a system on chip device we examine the applications of Smart Inspection by layer including active, poly, contact, metal and via layers. Data volume

  20. Evaluation of potential performance additives for the advanced lithium bromide chiller

    SciTech Connect

    Reiner, R.H.; Del Cul, W.; Perez-Blanco, H.; Ally, M.R.; Zaltash, A.

    1991-04-01

    The effectiveness and stability of potential heat-and-mass transfer (performance) additives for an advanced lithium bromide (LiBr) chiller were evaluated in a series of experimental studies. These studies of additive effectiveness and stability were necessary because many currently used performance additives decompose at the high generator temperatures (220{degrees}C to 260{degrees}C) desired for this particular advanced LiBr chiller. For example, one common performance additive, 2-ethyl-l-hexanol (2EH), reacts with the corrosion inhibitor, lithium chromate (Li{sub 2}CrO{sub 4}), even at moderate generator temperatures ({ge}180{degrees}C). These stability problems can be mitigated by using less reactive corrosion inhibitors such as lithium molybdate (Li{sub 2}MoO{sub 4}) and by using more stable performance additives such as 1-heptanol (HEP) or 1H,1H,7H-dodecafluoro-1-heptanol (DFH). There seems to be a trade-off between additive stability and effectiveness: the most effective performance additives are not the most stable additives. These studies indicate that HEP or DFH may be effective additives in the advanced LiBr chiller if Li{sub 2}MoO{sub 4} is used as a corrosion inhibitor.

  1. Significant Advancements in Technology to Improve Instruction for All Students: Including Those with Disabilities

    ERIC Educational Resources Information Center

    Meyen, Edward

    2015-01-01

    Sharing thoughts on what represents significant advancements involving the education of persons for whom typical instruction is not effective seems simple enough. You think about the work you are engaged in and reflect on how you came to do what you are doing. If you have a record of being persistent in your work, then that becomes the context for…

  2. Strategic Leadership: A Model for Promoting, Sustaining, and Advancing Institutional Significance

    ERIC Educational Resources Information Center

    Scott, Kenneth E.; Johnson, Mimi

    2011-01-01

    This article presents the methods, materials, and manpower required to create a strategic leadership program for promoting, sustaining, and advancing institutional significance. The functionality of the program is based on the Original Case Study Design (OCSD) methodology, in which participants are given actual college issues to investigate from a…

  3. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3 Advance... a Schedule 3 chemical above the declaration threshold; (ii) You plan to produce at a plant declared under § 714.1(a)(1)(ii) of the CWCR an additional Schedule 3 chemical above the declaration...

  4. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Advance declaration requirements for additionally planned production of Schedule 3 chemicals. 714.3 Section 714.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS...

  5. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3 Advance... a Schedule 3 chemical above the declaration threshold; (ii) You plan to produce at a plant declared under § 714.1(a)(1)(ii) of the CWCR an additional Schedule 3 chemical above the declaration...

  6. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3 Advance... a Schedule 3 chemical above the declaration threshold; (ii) You plan to produce at a plant declared under § 714.1(a)(1)(ii) of the CWCR an additional Schedule 3 chemical above the declaration...

  7. 15 CFR 713.4 - Advance declaration requirements for additionally planned production, processing, or consumption...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Advance declaration requirements for additionally planned production, processing, or consumption of Schedule 2 chemicals. 713.4 Section 713.4 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF...

  8. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3 Advance... a Schedule 3 chemical above the declaration threshold; (ii) You plan to produce at a plant declared under § 714.1(a)(1)(ii) of the CWCR an additional Schedule 3 chemical above the declaration...

  9. Advanced Industrial Materials (AIM) program. Compilation of project summaries and significant accomplishments FY 1996

    SciTech Connect

    1997-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven {open_quotes}Vision Industries{close_quotes} that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: (1) Aluminum; (2) Chemical; (3) Forest Products; (4) Glass; (5) Metal Casting; (6) Refineries; and (7) Steel. This report is a compilation of project summaries and significant accomplishments on materials.

  10. Recent advances in the gold-catalyzed additions to C–C multiple bonds

    PubMed Central

    Huang, He; Zhou, Yu

    2011-01-01

    Summary C–O, C–N and C–C bonds are the most widespread types of bonds in nature, and are the cornerstone of most organic compounds, ranging from pharmaceuticals and agrochemicals to advanced materials and polymers. Cationic gold acts as a soft and carbophilic Lewis acid and is considered one of the most powerful activators of C–C multiple bonds. Consequently, gold-catalysis plays an important role in the development of new strategies to form these bonds in more convenient ways. In this review, we highlight recent advances in the gold-catalyzed chemistry of addition of X–H (X = O, N, C) bonds to C–C multiple bonds, tandem reactions, and asymmetric additions. This review covers gold-catalyzed organic reactions published from 2008 to the present. PMID:21804887

  11. Prognostic significance of CT-emphysema score in patients with advanced squamous cell lung cancer

    PubMed Central

    Kim, Young Saing; Ahn, Hee Kyung; Cho, Eun Kyung; Jeong, Yu Mi; Kim, Jeong Ho

    2016-01-01

    Background Although emphysema is a known independent risk factor of lung cancer, no study has addressed the prognostic impact of computed tomography (CT)-emphysema score in advanced stage lung cancer. Methods For 84 consecutive patients with stage IIIB and IV squamous cell lung cancer that underwent palliative chemotherapy, severity of emphysema was semi-quantitatively scored using baseline chest CT images according to the Goddard scoring system (possible scores range, 0–24). The cutoff of high CT-emphysema score was determined using the maximum chi-squared test and the prognostic significance of the high CT-emphysema score was evaluated using Kaplan-Meier analysis and Cox proportional hazards analysis. Results The median CT-emphysema score was 5 (range, 0–22). Patients with a high CT-emphysema score (≥4) tended to have poorer overall survival (OS) (median: 6.3 vs. 13.7 months) than those with a score of <4 (P=0.071). Multivariable analysis revealed that a higher CT-emphysema score was a significant independent prognostic factor for poor OS [hazard ratio (HR) =2.06; 95% confidence interval (CI), 1.24–3.41; P=0.005), along with no response to first-line therapy (P=0.009) and no second-line therapy (P<0.001). Conclusions CT-emphysema score is significantly associated with poor prognosis in patients with advanced squamous cell lung cancer.

  12. Synthesis and characterization of advanced durum wheat hybrids and addition lines with thinopyrum chromosomes.

    PubMed

    Jauhar, Prem P; Peterson, Terrance S

    2013-01-01

    Durum wheat (Triticum turgidum L., 2n = 4x = 28; AABB genomes) is a natural hybrid-an allotetraploid between 2 wild species, Triticum urartu Tumanian (AA genome) and Aegilops speltoides Tausch (BB genome). Even at the allotetraploid level, durum wheat can tolerate chromosomal imbalance, for example, addition of alien chromosome 1E of diploid wheatgrass, Lophopyrum elongatum. Therefore, one way to broaden its genetic base is to add a desirable chromosome(s) from diploid wild relatives. We attempted chromosomal engineering with chromosomes of a diploid wheatgrass, Thinopyrum bessarabicum-a source of resistance to some diseases including Fusarium head blight. Several advanced hybrids and alien addition lines were studied using traditional cytology, multicolor fluorescent genomic in situ hybridization, and molecular markers. Hybrid derivatives varied in chromosome number from F1 to F8 generations and in backcross generations. In advanced generations, we exercised selection against 28-chromosome plants and in favor of 30-chromosome plants that helped recover 14 addition lines in the F8 generation, as indicated by the absence of segregation for 29-chromosome plants. Disomic additions showed regular meiosis with 15 bivalents, 14 of durum wheat, and 1 of Th. bessarabicum. The addition lines will facilitate further chromosome engineering work on durum wheat for broadening its genetic base. PMID:23396879

  13. Significant Advances in the AIRS Science Team Version-6 Retrieval Algorithm

    NASA Technical Reports Server (NTRS)

    Susskind, Joel; Blaisdell, John; Iredell, Lena; Molnar, Gyula

    2012-01-01

    AIRS/AMSU is the state of the art infrared and microwave atmospheric sounding system flying aboard EOS Aqua. The Goddard DISC has analyzed AIRS/AMSU observations, covering the period September 2002 until the present, using the AIRS Science Team Version-S retrieval algorithm. These products have been used by many researchers to make significant advances in both climate and weather applications. The AIRS Science Team Version-6 Retrieval, which will become operation in mid-20l2, contains many significant theoretical and practical improvements compared to Version-5 which should further enhance the utility of AIRS products for both climate and weather applications. In particular, major changes have been made with regard to the algOrithms used to 1) derive surface skin temperature and surface spectral emissivity; 2) generate the initial state used to start the retrieval procedure; 3) compute Outgoing Longwave Radiation; and 4) determine Quality Control. This paper will describe these advances found in the AIRS Version-6 retrieval algorithm and demonstrate the improvement of AIRS Version-6 products compared to those obtained using Version-5,

  14. Safety significance of ATR (Advanced Test Reactor) passive safety response attributes

    SciTech Connect

    Atkinson, S.A.

    1989-01-01

    The Advanced Test Reactor (ATR) at the Idaho National Engineering Laboratory was designed with some passive safety response attributes which contribute to the safety posture of the facility. The three passive safety attributes being evaluated in the paper are: (1) In-core and in-vessel natural convection cooling, (2) a passive heat sink capability of the ATR primary coolant system (PCS) for the transfer of decay power from the uninsulated piping to the confinement, and (3) gravity feed of emergency coolant makeup. The safety significance of the ATR passive safety response attributes is that the reactor can passively respond for most transients, given a reactor scram, to provide adequate decay power removal and a significant time for operator action should the normal active heat removal systems and their backup systems both fail. The ATR Interim Level 1 Probabilistic Risk Assessment (PRA) model ands results were used to evaluate the significance to ATR fuel damage frequency (or probability) of the above three passive response attributes. The results of the evaluation indicate that the first attribute is a major safety characteristic of the ATR. The second attribute has a noticeable but only minor safety significance. The third attribute has no significant influence on the ATR Level 1 PRA because of the diversity and redundancy of the ATR firewater injection system (emergency coolant system). 8 refs., 4 figs., 1 tab.

  15. Clinical significance of systematic retroperitoneal lymphadenectomy during interval debulking surgery in advanced ovarian cancer patients

    PubMed Central

    Takada, Toshio; Iitsuka, Chiaki; Nomura, Hidetaka; Abe, Akiko; Taniguchi, Tomoko; Takizawa, Ken

    2015-01-01

    Objective To investigate the clinical significance of systematic retroperitoneal lymphadenectomy during interval debulking surgery (IDS) in advanced epithelial ovarian cancer (EOC) patients. Methods We retrospectively reviewed the medical records of 124 advanced EOC patients and analyzed the details of neoadjuvant chemotherapy (NACT), IDS, postoperative treatment, and prognoses. Results Following IDS, 98 patients had no gross residual disease (NGRD), 15 had residual disease sized <1 cm (optimal), and 11 had residual disease sized ≥1 cm (suboptimal). Two-year overall survival (OS) and progression-free survival (PFS) rates were 88.8% and 39.8% in the NGRD group, 40.0% and 13.3% in the optimal group (p<0.001 vs. NGRD for both), and 36.3% and 0% in the suboptimal group, respectively. Five-year OS and 2-year PFS rates were 62% and 56.1% in the lymph node-negative (LN-) group and 26.2% and 24.5% in the lymph node-positive (LN+) group (p=0.0033 and p=0.0024 vs. LN-, respectively). Furthermore, survival in the LN+ group, despite surgical removal of positive nodes, was the same as that in the unknown LN status group, in which lymphadenectomy was not performed (p=0.616 and p=0.895, respectively). Multivariate analysis identified gross residual tumor during IDS (hazard ratio, 3.68; 95% confidence interval, 1.31 to 10.33 vs. NGRD) as the only independent predictor of poor OS. Conclusion NGRD after IDS improved prognosis in advanced EOC patients treated with NACT-IDS. However, while systematic retroperitoneal lymphadenectomy during IDS may predict outcome, it does not confer therapeutic benefits. PMID:26197771

  16. Combining Advanced Oxidation Processes: Assessment Of Process Additivity, Synergism, And Antagonism

    SciTech Connect

    Peters, Robert W.; Sharma, M.P.; Gbadebo Adewuyi, Yusuf

    2007-07-01

    This paper addresses the process interactions from combining integrated processes (such as advanced oxidation processes (AOPs), biological operations, air stripping, etc.). AOPs considered include: Fenton's reagent, ultraviolet light, titanium dioxide, ozone (O{sub 3}), hydrogen peroxide (H{sub 2}O{sub 2}), sonication/acoustic cavitation, among others. A critical review of the technical literature has been performed, and the data has been analyzed in terms of the processes being additive, synergistic, or antagonistic. Predictions based on the individual unit operations are made and compared against the behavior of the combined unit operations. The data reported in this paper focus primarily on treatment of petroleum hydrocarbons and chlorinated solvents. (authors)

  17. Advances in understanding monoclonal gammopathy of undetermined significance as a precursor of multiple myeloma

    PubMed Central

    Weiss, Brendan M; Kuehl, W Michael

    2010-01-01

    Monoclonal gammopathy of undetermined significance (MGUS) affects at least 3% of the population above the age of 50 and is the precursor to multiple myeloma (MM), an incurable malignancy of plasma cells. Recent advances in MGUS include: an improved understanding of the pathogenesis of MGUS and its progression to MM, involving molecular events intrinsic to the malignant plasma cell as well as the microenvironment; novel techniques to assess risk for progression to MM using serum-free light-chain analysis and immunophenotyping; and a renewed interest in chemoprevention of MM. In the future, continued improvement in our understanding of MGUS will lead to the development of better biomarkers for prognosis and therapies for chemoprevention of MM. PMID:20473362

  18. Is the addition of cisplatin to S-1 better than S-1 alone for patients with advanced gastroesophageal cancer?

    PubMed

    Ajani, Jaffer A

    2008-09-01

    The investigators of the recent phase III SPIRITS trial found that the addition of cisplatin to S-1 (a fourth generation oral fluoropyrimidine) provided a significant overall survival advantage (P = 0.04) over treatment with S-1 alone among previously untreated patients with advanced gastric cancer. In addition, the combination had an acceptable safety profile. This trial establishes a new first-line standard treatment for patients with advanced gastric cancer in Japan. Level 1 evidence for prolonged survival of patients with advanced gastroesophageal cancer has been established for docetaxel (V-325 trial) and cisplatin (SPIRITS trial) but not for S-1. Fluoropyrimidines (S-1 included) have been considered part of standard front-line therapy without the establishment of level 1 evidence for prolonging survival. The future lies in the rapid incorporation of biologic agents in combination with cytotoxics, with a continued focus on safety and convenience, and efforts to individualize therapy for each patient. Individualized therapy may be defined as the selection of optimum treatment for a specific patient on the basis of knowledge of the cancer's genetic and epigenetic alterations and the patient's genotype. PMID:18628737

  19. Evaluation of critical materials in five additional advance design photovoltaic cells

    SciTech Connect

    Smith, S.A.; Watts, R.L.; Martin, P.; Gurwell, W.E.

    1981-02-01

    The objective of this study is to identify potential material supply constraints due to the large-scale deployment of five advanced photovoltaic (PV) cell designs, and to suggest strategies to reduce the impacts of these production capacity limitations and potential future material shortages. The Critical Materials Assessment Program (CMAP) screens the designs and their supply chains and identifies potential shortages which might preclude large-scale use of the technologies. The results of the screening of five advanced PV cell designs are presented: (1) indium phosphide/cadmium sulfide, (2) zinc phosphide, (3) cadmium telluride/cadmium sulfide, (4) copper indium selenium, and (5) cadmium selenide photoelectrochemical. Each of these five cells is screened individually assuming that they first come online in 1991, and that 25 Gwe of peak capacity is online by the year 2000. A second computer screening assumes that each cell first comes online in 1991 and that each cell has a 5 GWe of peak capacity by the year 2000, so that the total online capacity for the five cells is 25 GWe. Based on a review of the preliminary baseline screening results, suggestions were made for varying such parameters as the layer thickness, cell production processes, etc. The resulting PV cell characterizations were then screened again by the CMAP computer code. The CMAP methodology used to identify critical materials is described; and detailed characterizations of the advanced photovoltaic cell designs under investigation, descriptions of additional cell production processes, and the results are presented. (WHK)

  20. Prognostic significance of dilated inferior vena cava in advanced decompensated heart failure.

    PubMed

    Lee, Hsin-Fu; Hsu, Lung-An; Chang, Chi-Jen; Chan, Yi-Hsin; Wang, Chun-Li; Ho, Wan-Jing; Chu, Pao-Hsien

    2014-10-01

    Dilated inferior vena cava (IVC) is prevalent among patients with heart failure (HF), but whether its presence predicts worsening renal function (WRF) or adverse outcomes is unclear. This cohort study analyzed patients with left ventricular ejection fraction <40 % and repeated hospitalizations (≥2 times) for HF between August 2009 and August 2011. The study endpoints were death and HF re-hospitalization. Among baseline parameters, IVC diameter was the most powerful predictor for the development of WRF (area under the curve = 0.795, cut-off value = 20.5 mm). During the 2-year follow-up, 36 patients (49 %) were re-hospitalized for HF and 14 patients (19 %) died. The event rates were significantly greater in the WRF group than in the non-WRF group (71 vs. 30 %, P < 0.001 for HF re-hospitalization; 29 vs. 10 %, P = 0.03 for death). In Cox regression model, the risk of combined end-points was increased in patients with aging, elevated blood urine nitrogen, IVC >21 mm, and WRF. When adjusted for confounding factors, IVC >21 mm [hazard ratio (HR) 3.73, 95 % confidence interval (CI) 1.66-8.34] and WRF (HR 2.68, 95 % CI 1.07-6.75) were significant predictors for adverse outcomes. In patients with advanced decompensated HF, dilated IVC (>21 mm) predicted the development of WRF and could be a predictor for adverse outcomes. PMID:24939288

  1. Mechanical and Electrical Properties of a Polyimide Film Significantly Enhanced by the Addition of Single-Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Meador, Michael A.

    2005-01-01

    Single-wall carbon nanotubes have been shown to possess a combination of outstanding mechanical, electrical, and thermal properties. The use of carbon nanotubes as an additive to improve the mechanical properties of polymers and/or enhance their thermal and electrical conductivity has been a topic of intense interest. Nanotube-modified polymeric materials could find a variety of applications in NASA missions including large-area antennas, solar arrays, and solar sails; radiation shielding materials for vehicles, habitats, and extravehicular activity suits; and multifunctional materials for vehicle structures and habitats. Use of these revolutionary materials could reduce vehicle weight significantly and improve vehicle performance and capabilities.

  2. Immunoparesis and monoclonal gammopathy of undetermined significance are disassociated in advanced age.

    PubMed

    Cherry, Benjamin M; Costello, Rene; Zingone, Adriana; Burris, Jason; Korde, Neha; Manasanch, Elisabet; Kwok, Mary; Annunziata, Christina; Roschewski, Mark J; Engels, Eric A; Landgren, Ola

    2013-02-01

    Immunoparesis and a skewed serum free light chain (FLC) ratio are indicators of immune dysfunction predictive of progression from monoclonal gammopathy of undetermined significance (MGUS) to multiple myeloma (MM). Previous studies have reported increased prevalence of MGUS by age, but no study has examined the relationship between immunoparesis and abnormal FLC ratios in the elderly. We screened 453 older adults (median age, 80 years; range, 65-96) to characterize the patterns of immunoparesis and abnormal FLC ratio in relation to MGUS. We defined MGUS in 4.4% of the subjects; the prevalence was 12.5% among individuals of >90 years. In MGUS (vs. non-MGUS) cases, immunoparesis and abnormal FLC ratios were detected in 70.0% (vs. 49.0%; P = 0.07) and 50.0% (vs. 12.9%; P = 0.0001), respectively. Based on small numbers, MGUS patients with abnormal FLC ratio were borderline (P = 0.07) more likely to have immunoparesis. Overall, the prevalence of immunoparesis varied in a nonlinear fashion, with lowest frequencies in the youngest and oldest groups. Our observed disassociation between MGUS prevalence and impaired immunoglobulin production suggests that separate mechanisms are involved in the development of MGUS and immunoparesis in advanced age. These findings emphasize the need for molecularly defined methods to characterize myeloma precursor states and better predict progression to MM. PMID:23169485

  3. Raising the Bar: Significant Advances and Future Needs for Promoting Learning for Students with Severe Disabilities

    ERIC Educational Resources Information Center

    Spooner, Fred; Browder, Diane M.

    2015-01-01

    This essay describes major advances in educating students with severe disabilities. The authors propose that applied behavior analysis, the focus on functional life skills, and the promotion of academic content have been the major advances in the "how" and "what" of learning for this population. An increased focus on literacy,…

  4. Deep Brain Stimulation Significantly Decreases Disability from Low Back Pain in Patients with Advanced Parkinson's Disease

    PubMed Central

    Smith, Heather; Gee, Lucy; Kumar, Vignessh; Ramirez-Zamora, Adolfo; Durphy, Jennifer; Hanspal, Era; Barba, Anne; Molho, Eric; Shin, Damian; Pilitsis, Julie G.

    2015-01-01

    Background Up to 60% of Parkinson's patients suffer from low back pain (LBP) during the course of their disease. How LBP affects daily functional status and how to manage this aspect of PD has not been adequately explored. Methods We examined sixteen patients undergoing bilateral subthalamic nucleus deep brain stimulation (STN DBS) who met inclusion criteria for moderate disability from LBP, as classified by the Oswestry Low Back Pain Disability Index (OLBPD). Results Thirteen of 16 patients had attempted additional treatments for LBP including medical management, massage, chiropractic, epidural steroid injections and/or surgery and with minimal relief. Following DBS, there was a significant improvement in OLBPD at both the 6-month and 1-year time points (p < 0.02, p < 0.005 respectively). A mean improvement of 31.7% on OLBPD score was noted. Visual Analogue Scale (VAS) similarly decreased significantly at 1 year (p = 0.015). There was no correlation between OLBPD score and other measures including UPDRS, age, and other non-motor symptoms. Conclusion Given the prevalent yet undertreated disability associated with LBP in PD, these results are novel in that they show STN DBS has a significant positive effect on disability associated with LBP. PMID:25895600

  5. Significant reserve additions from oligocene Hackberry Sands utilizing 3-D seismic, upper Texas and Louisiana Gulf Coast

    SciTech Connect

    Zamboras, R.L.

    1995-10-01

    The Oligocene Hackberry sands of the Hackberry Embayment represent a complex and elusive exploration target. 3-D seismic evaluation along the headward erosional limits of the embayment provides a reconstructive framework of tectonic and sedimentation patterns which facilitate hydrocarbon exploration. The 3-D seismic along the Orange County, Texas portion of the Oligocene Hackberry trend indicates: (1) similarities of Hackberry structural and depositional setting to that of the underlying Eocene Yegua Formation; (2) four distinct cyclical sedimentation episodes associated with basin floor slump faulting: (3) the usefulness of seismic attributes as direct hydrocarbon indicators, and (4) the potential for significant oil and gas reserves additions in a mature trend. The Hackberry embayment represents a microcosm of the basin structural and depositional processes. Utilizing 3-D seismic to lower risk and finding cost will renew interest in trends such as the Hackberry of the Upper Texas-Louisiana Gulf Coast.

  6. Appropriate Fe (II) Addition Significantly Enhances Anaerobic Ammonium Oxidation (Anammox) Activity through Improving the Bacterial Growth Rate

    PubMed Central

    Liu, Yiwen; Ni, Bing-Jie

    2015-01-01

    The application of anaerobic ammonium oxidation (Anammox) process is often limited by the slow growth rate of Anammox bacteria. As the essential substrate element that required for culturing Anammox sludge, Fe (II) is expected to affect Anammox bacterial growth. This work systematically studied the effects of Fe (II) addition on Anammox activity based on the kinetic analysis of specific growth rate using data from batch tests with an enriched Anammox sludge at different dosing levels. Results clearly demonstrated that appropriate Fe (II) dosing (i.e., 0.09 mM) significantly enhanced the specific Anammox growth rate up to 0.172 d−1 compared to 0.118 d−1 at regular Fe (II) level (0.03 mM). The relationship between Fe (II) concentration and specific Anammox growth rate was found to be well described by typical substrate inhibition kinetics, which was integrated into currently well-established Anammox model to describe the enhanced Anammox growth with Fe (II) addition. The validity of the integrated Anammox model was verified using long-term experimental data from three independent Anammox reactors with different Fe (II) dosing levels. This Fe (II)-based approach could be potentially implemented to enhance the process rate for possible mainstream application of Anammox technology, in order for an energy autarchic wastewater treatment. PMID:25644239

  7. Appropriate Fe (II) Addition Significantly Enhances Anaerobic Ammonium Oxidation (Anammox) Activity through Improving the Bacterial Growth Rate

    NASA Astrophysics Data System (ADS)

    Liu, Yiwen; Ni, Bing-Jie

    2015-02-01

    The application of anaerobic ammonium oxidation (Anammox) process is often limited by the slow growth rate of Anammox bacteria. As the essential substrate element that required for culturing Anammox sludge, Fe (II) is expected to affect Anammox bacterial growth. This work systematically studied the effects of Fe (II) addition on Anammox activity based on the kinetic analysis of specific growth rate using data from batch tests with an enriched Anammox sludge at different dosing levels. Results clearly demonstrated that appropriate Fe (II) dosing (i.e., 0.09 mM) significantly enhanced the specific Anammox growth rate up to 0.172 d-1 compared to 0.118 d-1 at regular Fe (II) level (0.03 mM). The relationship between Fe (II) concentration and specific Anammox growth rate was found to be well described by typical substrate inhibition kinetics, which was integrated into currently well-established Anammox model to describe the enhanced Anammox growth with Fe (II) addition. The validity of the integrated Anammox model was verified using long-term experimental data from three independent Anammox reactors with different Fe (II) dosing levels. This Fe (II)-based approach could be potentially implemented to enhance the process rate for possible mainstream application of Anammox technology, in order for an energy autarchic wastewater treatment.

  8. Overview of Heat Addition and Efficiency Predictions for an Advanced Stirling Convertor

    NASA Technical Reports Server (NTRS)

    Wilson, Scott D.; Reid, Terry V.; Schifer, Nicholas A.; Briggs, Maxwell H.

    2012-01-01

    The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two high-efficiency Advanced Stirling Convertors (ASCs), developed by Sunpower Inc. and NASA Glenn Research Center (GRC). The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot end and cold end temperatures, and specified electrical power output for a given net heat input. Microporous bulk insulation is used in the ground support test hardware to minimize the loss of thermal energy from the electric heat source to the environment. The insulation package is characterized before operation to predict how much heat will be absorbed by the convertor and how much will be lost to the environment during operation. In an effort to validate these predictions, numerous tasks have been performed, which provided a more accurate value for net heat input into the ASCs. This test and modeling effort included: (a) making thermophysical property measurements of test setup materials to provide inputs to the numerical models, (b) acquiring additional test data that was collected during convertor tests to provide numerical models with temperature profiles of the test setup via thermocouple and infrared measurements, (c) using multidimensional numerical models (computational fluid dynamics code) to predict net heat input of an operating convertor, and (d) using validation test hardware to provide direct comparison of numerical results and validate the multidimensional numerical models used to predict convertor net heat input. This effort produced high fidelity ASC net heat input predictions, which were successfully validated using

  9. Significant diethyl phthalate (DEP) degradation by combined advanced oxidation process in aqueous solution.

    PubMed

    Na, Seungmin; Ahn, Yun-Gyong; Cui, Mingcan; Khim, Jeehyeong

    2012-06-30

    Ultrasound (US) combined with ultraviolet (UV) irradiation and a titanium dioxide (TiO(2)) catalyst was used to effectively remove diethyl phthalate (DEP) from aqueous solutions. Single (sonolysis, photolysis, photocatalysis) and combined (sonophotolysis, sonophotocatalysis) processes were performed to confirm the synergistic effects and DEP degradation mechanism. Using only US, the optimum frequency for DEP degradation was 283 kHz. At this frequency a high rate of hydrogen peroxide (H(2)O(2)) formation was observed of approximately 0.32 mM min(-1). The pseudo-first order degradation rate constants were 10(-2)-10(-4) min(-1) depending on the process. Significant degradation and mineralization (TOC) of DEP were observed with the sonophotolytic and sonophotocatalytic processes. Moreover, synergistic effects of 1.29 and 1.95 were exhibited at the sonophotocatalytic and sonophotolytic DEP degradation, respectively. Furthermore, additional advantageous reactions may occur in the heterogeneous sonophotocatalytic process due to interactions between US, UV, and the photocatalyst. PMID:22406850

  10. Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1995

    SciTech Connect

    1996-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This report contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Subject areas covered are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

  11. Prospects for Significant Theoretical Advances in Communication: The Role of the Interesting Question.

    ERIC Educational Resources Information Center

    Gouran, Dennis S.

    This paper discusses ways in which the field of speech communication can be advanced. The first half of the paper characterizes the objectivist and subjectivist views of how knowledge is acquired and the forms of inquiry to which these views have led. The remainder of the paper demonstrates the role that the "interesting question" (one for which…

  12. Clinical Significance of CA125 Level after the First Cycle of Chemotherapy on Survival of Patients with Advanced Ovarian Cancer

    PubMed Central

    Lee, Maria; Chang, Min Young; Yoo, Hanna; Lee, Kyung Eun; Chay, Doo Byung; Cho, Hanbyoul; Kim, Young Tae

    2016-01-01

    Purpose To determine the most powerful cancer antigen 125 (CA125)-related prognostic factor for advanced epithelial ovarian cancer (EOC) and to identify cut-off values that distinguish patients with a poor prognosis from those with a good prognosis. Materials and Methods We included 223 patients who received staging laparotomy and were diagnosed with stage IIC–IV serous EOC. Cox regression analysis was used to determine the most significant prognostic factor among the following variables: serum CA125 before surgery and after the first, second, and sixth cycles of chemotherapy; the nadir CA125 value; the relative percentage change in CA125 levels after the first and second cycles of chemotherapy compared to baseline CA125; CA125 half-life; time to nadir; and time to normalization of the CA125 level. Results The CA125 level after the first chemotherapy cycle was the most significant independent prognostic factor for overall survival (OS). Time to normalization (p=0.028) and relative percentage change between CA125 levels at baseline and after the first chemotherapy cycle (p=0.021) were additional independent prognostic factors in terms of OS. The CA125 level after the first chemotherapy cycle (p=0.001) and time to normalization (p<0.001) were identified as independent prognostic factors for progression free survival (PFS). Conclusion Among well-established CA125-related prognostic factors, serum CA125 levels after the first cycle of chemotherapy and time to normalization were the most significant prognostic factors for both OS and PFS. PMID:26996555

  13. Indication of advanced orthokeratology as an additional treatment after refractive surgeries

    NASA Astrophysics Data System (ADS)

    Mitsui, Iwane; Yamada, Yoshida

    2005-04-01

    Ortho-K was indicated for twenty-three eyes of thirteen patients after refractive surgeries such as RK(1) ,PRK(2), and LASIK(3). The average of their Uncorrective Visual Acuity (UCVA) after surgeries was 20/30 or worse, and mean spherical equivalent (SE) was -2.42D. They were followed at least two years wearing of Advanced Ortho-K lenses during night. The following studies were examined on their auto-refraction, auto-keratometry, uncorrected and corrected visual acuity, intra-ocular pressure, corneal endothelium, corneal thickness, corneal curvature, and corneal shape for more than two years. 95% of the patients improved in UCVA up to 20/20 or better, 86% of them improved up to 20/15 or better, and 76% of them improved up to 20/10. The mean SEs improved to -1.20+/-1.02D during six months, - 1.03+/-0.83D during one year, and -0.73+/-0.64D during two years. Astigmatism also slightly decreased. Ophthalmologic examinations showed no abnormalities including flap formation, intra-ocular pressure, and endothelium. Among the refractive surgeries as well as RK and PRK, LASIK has been most popularly spread all over the world. However, patient's quality of vision is not always satisfied during and/or after refractive surgeries, because of several complications such as instability of flap formation, unexpected keratoectasia, diffuse lamellar keratitis, epithelial ingrowth, irregularity of corneal surface which caused myopia regression. In such cases, additional surgical procedures should not be indicated easily. However, Ortho-K is safe and effective enough to correct refractive errors still remained or re-appeared after refractive surgeries. It enables to restore the corneal irregularity to the ideal shape.

  14. Automated microbial metabolism laboratory. [design of advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into test chambers

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The design and rationale of an advanced labeled release experiment based on single addition of soil and multiple sequential additions of media into each of four test chambers are outlined. The feasibility for multiple addition tests was established and various details of the methodology were studied. The four chamber battery of tests include: (1) determination of the effect of various atmospheric gases and selection of that gas which produces an optimum response; (2) determination of the effect of incubation temperature and selection of the optimum temperature for performing Martian biochemical tests; (3) sterile soil is dosed with a battery of C-14 labeled substrates and subjected to experimental temperature range; and (4) determination of the possible inhibitory effects of water on Martian organisms is performed initially by dosing with 0.01 ml and 0.5 ml of medium, respectively. A series of specifically labeled substrates are then added to obtain patterns in metabolic 14CO2 (C-14)O2 evolution.

  15. Efficacy of Addition of Antiangiogenic Agents to Taxanes-Containing Chemotherapy in Advanced Nonsmall-Cell Lung Cancer

    PubMed Central

    Sheng, Jin; Yang, Yun-Peng; Yang, Bi-Jun; Zhao, Yuan-Yuan; Ma, Yu-Xiang; Hong, Shao-Dong; Zhang, Ya-Xiong; Zhao, Hong-Yun; Huang, Yan; Zhang, Li

    2015-01-01

    Abstract Preclinical researches indicated a potential synergistic effect of taxanes-containing chemotherapy (TCC) and antiangiogenic agents (AAs) on the treatment of advanced nonsmall-cell lung cancer (NSCLC). The advantage of adding AA to TCC in the real world remains confusing. We summarized the current evidences from relevant phase II/III randomized controlled trials (RCTs) by performing this meta-analyses. Electronic databases were searched for eligible literatures. The primary endpoint was overall survival (OS). Pooled hazard ratios (HRs) and 95% confidence intervals (CIs) for outcomes were calculated using RevMan 5.2. A total of 14 phase II/III RCTs involving 9703 participants were included. Compared to standard TCC, the addition of AA was associated with the significant better OS (HR 0.92, 95% CI 0.87–0.97, P = 0.002), prolonged progression-free survival (HR 0.79, 95% CI 0.71–0.87, P < 0.00001), superior response rate (risk ratio [RR] 1.69, 95% CI 1.47–1.95, P < 0.0001), and disease control rate (RR 1.19, 95% CI 1.08–1.32, P < 0.00001). Subgroup analyses indicated that patient treated with monoclonal antibodies (HR 0.89, 95% CI 0.82–0.96, P = 0.02) as well as application in second-line (HR 0.91, 95% CI 0.85–0.96, P = 0.02) acquired significant OS improvement. Other clinical factors directing significant OS improvement by the combination strategy included nonsquamous cancer (P = 0.002), nonsmokers (P = 0.0005), and female (P = 0.02). Toxicities were greater but generally mild or moderate in the combination group, and were mostly manageable. In summary, the addition of AAs to TCC could improve prognosis of advanced NSCLC. Furthermore, proper selection of patient population and AAs is crucial for clinical trials design and clinical practice in the future. PMID:26252298

  16. "I Don't Want to Die like that...": The Impact of Significant Others' Death Quality on Advance Care Planning

    ERIC Educational Resources Information Center

    Carr, Deborah

    2012-01-01

    Purpose of the Study: I examine whether 5 aspects of a significant other's death quality (pain, decision-making capacity, location, problems with end-of life care, and preparation) affect whether one does advance care planning (ACP). I also identify specific aspects of others' deaths that respondents say triggered their own planning. Design and…

  17. Advanced Manufacturing Technologies (AMT): Additive Manufactured Hot Fire Planning and Testing in GRC Cell 32 Project

    NASA Technical Reports Server (NTRS)

    Fikes, John C.

    2014-01-01

    The objective of this project is to hot fire test an additively manufactured thrust chamber assembly TCA (injector and thrust chamber). GRC will install the additively manufactured Inconel 625 injector, two additively manufactured (SLM) water cooled Cu-Cr thrust chamber barrels and one additively manufactured (SLM) water cooled Cu-Cr thrust chamber nozzle on the test stand in Cell 32 and perform hot fire testing of the integrated TCA.

  18. Gluten-free dough-making of specialty breads: Significance of blended starches, flours and additives on dough behaviour.

    PubMed

    Collar, Concha; Conte, Paola; Fadda, Costantino; Piga, Antonio

    2015-10-01

    The capability of different gluten-free (GF) basic formulations made of flour (rice, amaranth and chickpea) and starch (corn and cassava) blends, to make machinable and viscoelastic GF-doughs in absence/presence of single hydrocolloids (guar gum, locust bean and psyllium fibre), proteins (milk and egg white) and surfactants (neutral, anionic and vegetable oil) have been investigated. Macroscopic (high deformation) and macromolecular (small deformation) mechanical, viscometric (gelatinization, pasting, gelling) and thermal (gelatinization, melting, retrogradation) approaches were performed on the different matrices in order to (a) identify similarities and differences in GF-doughs in terms of a small number of rheological and thermal analytical parameters according to the formulations and (b) to assess single and interactive effects of basic ingredients and additives on GF-dough performance to achieve GF-flat breads. Larger values for the static and dynamic mechanical characteristics and higher viscometric profiles during both cooking and cooling corresponded to doughs formulated with guar gum and Psyllium fibre added to rice flour/starch and rice flour/corn starch/chickpea flour, while surfactant- and protein-formulated GF-doughs added to rice flour/starch/amaranth flour based GF-doughs exhibited intermediate and lower values for the mechanical parameters and poorer viscometric profiles. In addition, additive-free formulations exhibited higher values for the temperature of both gelatinization and retrogradation and lower enthalpies for the thermal transitions. Single addition of 10% of either chickpea flour or amaranth flour to rice flour/starch blends provided a large GF-dough hardening effect in presence of corn starch and an intermediate effect in presence of cassava starch (chickpea), and an intermediate reinforcement of GF-dough regardless the source of starch (amaranth). At macromolecular level, both chickpea and amaranth flours, singly added, determined

  19. Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1997

    SciTech Connect

    1998-05-01

    The mission of the Advanced Industrial Materials (AIM) Program is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. A fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrates on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support. Assessments of materials needs and opportunities in the process industries are an on-going effort within the program. These assessments are being used for program planning and priority setting, followed by support of work to satisfy those needs. All the industries have identified materials as critical, particularly for high-temperature strength, corrosion resistance, and wear resistance. Also important from the energy efficiency viewpoint are membranes, catalytic membranes, and reactors for separations, both for processing and waste reduction. AIM focuses, therefore, on high-temperature materials, corrosion resistant materials, wear resistant materials, strong polymers, coatings, and membrane materials for industrial applications.

  20. Polar bears (Ursus maritimus), the most evolutionary advanced hibernators, avoid significant bone loss during hibernation.

    PubMed

    Lennox, Alanda R; Goodship, Allen E

    2008-02-01

    Some hibernating animals are known to reduce muscle and bone loss associated with mechanical unloading during prolonged immobilisation,compared to humans. However, here we show that wild pregnant polar bears (Ursus maritimus) are the first known animals to avoid significant bone loss altogether, despite six months of continuous hibernation. Using serum biochemical markers of bone turnover, we showed that concentrations for bone resorption are not significantly increased as a consequence of hibernation in wild polar bears. This is in sharp contrast to previous studies on other hibernating species, where for example, black bears (Ursus americanus), show a 3-4 fold increase in serum bone resorption concentrations posthibernation,and must compensate for this loss through rapid bone recovery on remobilisation, to avoid the risk of fracture. In further contrast to black bears, serum concentrations of bone formation markers were highly significantly increased in pregnant female polar bears compared to non-pregnant,thus non-hibernating females both prior to and after hibernation. However, bone formation concentrations in new mothers were significantly reduced compared to pre-hibernation concentrations. The de-coupling of bone turnover in favour of bone formation prior to hibernation, suggests that wild polar bears may posses a unique physiological mechanism for building bone in protective preparation against expected osteopenia associated with disuse,starvation, and hormonal drives to mobilise calcium for reproduction, during hibernation. Understanding this physiological mechanism could have profound implications for a natural solution for the prevention of osteoporosis in animals subjected to captivity with inadequate space for exercise,humans subjected to prolonged bed rest while recovering from illness, or astronauts exposed to antigravity during spaceflight.© 2008 Elsevier Inc. All rights reserved. PMID:18249018

  1. Photointerpretation of Skylab 2 multispectral camera (S-190A) data: Advance report of significant results

    NASA Technical Reports Server (NTRS)

    Jensen, M. L. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. A significant and possible major economic example of the practical value of Skylab photographs was provided by locating on Skylab Camera Station Number 4, frame 010, SL-2, an area of exposures of limestone rocks which were thought to be completely covered by volcanic rocks based upon prior mapping. The area is located less than 12 miles north of the Ruth porphyry copper deposit, White Pine County, Nevada. This is a major copper producing open pit mine owned by Kennecott Copper Corporation. Geophysical maps consisting of gravity and aeromagnetic studies have been published indicating three large positive magnetic anomalies located at the Ruth ore deposits, the Ward Mountain, not a mineralized area, and in the area previously thought to be completely covered by post-ore volcanics. Skylab photos indicate, however, that erosion has removed volcanic cover in specific sites sufficient to expose the underlying older rocks suggesting, therefore, that the volcanic rocks may not be the cause of the aeromagnetic anomaly. Field studies have verified the initial interpretations made from the Skylab photos. The potential significance of this study is that the large positive aeromagnetic anomaly suggests the presence of cooled and solidified magma below the anomalies, in which ore-bearing solutions may have been derived forming possible large ore deposits.

  2. The Synergism Between Heat and Mass Transfer Additive and Advanced Surfaces in Aqueous LiBr Horizontal Tube Absorbers

    SciTech Connect

    Miller, W.A.

    1999-03-24

    Experiments were conducted in a laboratory to investigate the absorption of water vapor into a falling-film of aqueous lithium bromide (LiBr). A mini-absorber test stand was used to test smooth tubes and a variety of advanced tube surfaces placed horizontally in a single-row bundle. The bundle had six copper tubes; each tube had an outside diameter of 15.9-mm and a length of 0.32-m. A unique feature of the stand is its ability to operate continuously and support testing of LiBr brine at mass fractions {ge} 0.62. The test stand can also support testing to study the effect of the failing film mass flow rate, the coolant mass flow rate, the coolant temperature, the absorber pressure and the tube spacing. Manufacturers of absorption chillers add small quantities of a heat and mass transfer additive to improve the performance of the absorbers. The additive causes surface stirring which enhances the transport of absorbate into the bulk of the film. Absorption may also be enhanced with advanced tube surfaces that mechanically induce secondary flows in the falling film without increasing the thickness of the film. Several tube geometry's were identified and tested with the intent of mixing the film and renewing the interface with fresh solution from the tube wall. Testing was completed on a smooth tube and several different externally enhanced tube surfaces. Experiments were conducted over the operating conditions of 6.5 mm Hg absorber pressure, coolant temperatures ranging from 20 to 35 C and LiBr mass fractions ranging from 0.60 through 0.62. Initially the effect of tube spacing was investigated for the smooth tube surface, tested with no heat and mass transfer additive. Test results showed the absorber load and the mass absorbed increased as the tube spacing increased because of the improved wetting of the tube bundle. However, tube spacing was not a critical factor if heat and mass transfer additive was active in the mini-absorber. The additive dramatically affected

  3. Dynamic modeling used for the addition of robotic operation to the Advanced Servomanipulator teleoperator

    SciTech Connect

    Corbett, G.K.; Bailey, J.M.

    1989-01-01

    A robotic mode has been added to the Advanced Servomanipulator (ASM), a 6 degree-of-freedom master/slave teleoperator. In order to understand the requirements for implementation of robotics on an arm designed for teleoperation, a dynamic simulation of the ASM slave arm was developed. The ASM model and modifications of the control system for robotic operation are presented. 7 refs., 3 figs.

  4. Trigonal pyramidal carbon geometry as model for electrophilic addition-substitution and elimination reactions and its significance in enzymatic processes

    NASA Astrophysics Data System (ADS)

    Buck, Henk M.

    Various examples are given in which compounds are characterized as products or intermediates in a (distorted) trigonal pyramidal (TP) geometry. These observations have taken place mainly in the field of carbocation chemistry. Special attention is given to carbenium ions formed by halogen addition to 1,1-diarylsubstituted ethylenes focused on the electronic effects of the C-halogen bond as axial bond in a TP geometry with regard to the ?-distribution in the rest of the molecular system. The experimental verification is accompanied by quantum chemical calculations. We also used the TP structure as a reactive model for specific enzymatic reactions. The relevance of this geometry is shown for the dehalogenation reaction of the nucleophilic displacement in dichloroethane catalyzed by haloalkane dehalogenase and for the decarboxylation of L-ornithine with ornithine decarboxylase under loss of carbon dioxide.

  5. Advances in Intracranial Pressure Monitoring and Its Significance in Managing Traumatic Brain Injury

    PubMed Central

    Kawoos, Usmah; McCarron, Richard M.; Auker, Charles R.; Chavko, Mikulas

    2015-01-01

    Intracranial pressure (ICP) measurements are essential in evaluation and treatment of neurological disorders such as subarachnoid and intracerebral hemorrhage, ischemic stroke, hydrocephalus, meningitis/encephalitis, and traumatic brain injury (TBI). The techniques of ICP monitoring have evolved from invasive to non-invasive—with both limitations and advantages. Some limitations of the invasive methods include short-term monitoring, risk of infection, restricted mobility of the subject, etc. The invasiveness of a method limits the frequency of ICP evaluation in neurological conditions like hydrocephalus, thus hampering the long-term care of patients with compromised ICP. Thus, there has been substantial interest in developing noninvasive techniques for assessment of ICP. Several approaches were reported, although none seem to provide a complete solution due to inaccuracy. ICP measurements are fundamental for immediate care of TBI patients in the acute stages of severe TBI injury. In severe TBI, elevated ICP is associated with mortality or poor clinical outcome. ICP monitoring in conjunction with other neurological monitoring can aid in understanding the pathophysiology of brain damage. This review article presents: (a) the significance of ICP monitoring; (b) ICP monitoring methods (invasive and non-invasive); and (c) the role of ICP monitoring in the management of brain damage, especially TBI. PMID:26690122

  6. The clinical significance and management of patients with incomplete coronary angiography and the value of additional computed tomography coronary angiography.

    PubMed

    Pregowski, Jerzy; Kepka, Cezary; Kruk, Mariusz; Mintz, Gary S; Kalinczuk, Lukasz; Ciszewski, Michal; Kochanowski, Lukasz; Wolny, Rafal; Chmielak, Zbigniew; Jastrzębski, Jan; Klopotowski, Mariusz; Zalewska, Joanna; Demkow, Marcin; Karcz, Maciej; Witkowski, Adam

    2014-04-01

    To assess the anatomical background and significance of incomplete invasive coronary angiography (ICA) and to evaluate the value of coronary computed tomography angiography (CTA) in this scenario. The current study is an analysis of high volume center experience with prospective registry of coronary CTA and ICA. The target population was identified through a review of the electronic database. We included consecutive patients referred for coronary CTA after ICA, which did not visualize at least one native coronary artery or by-pass graft. Between January 2009 and April 2013, 13,603 diagnostic ICA were performed. There were 45 (0.3 %) patients referred for coronary CTA after incomplete ICA. Patients were divided into 3 groups: angina symptoms without previous coronary artery by-pass grafting (CABG) (n = 11,212), angina symptoms with previous CABG (n = 986), and patients prior to valvular surgery (n = 925). ICA did not identify by-pass grafts in 21 (2.2 %) patients and in 24 (0.2 %) cases of native arteries. The explanations for an incomplete ICA included: 11 ostium anomalies, 2 left main spasms, 5 access site problems, 5 ascending aorta aneurysms, and 2 tortuous take-off of a subclavian artery. However, in 20 (44 %) patients no specific reason for the incomplete ICA was identified. After coronary CTA revascularization was performed in 11 (24 %) patients: 6 successful repeat ICA and percutaneous intervention and 5 CABG. Incomplete ICA constitutes rare, but a significant clinical problem. Coronary CTA provides adequate clinical information in these patients. PMID:24623270

  7. Predictive and prognostic significance of circulating endothelial cells in advanced non-small cell lung cancer patients.

    PubMed

    Yuan, Dong-mei; Zhang, Qin; Lv, Yan-ling; Ma, Xing-qun; Zhang, Yan; Liu, Hong-bing; Song, Yong

    2015-11-01

    The aim of this study was to evaluate the predictive and prognostic values of circulating endothelial cells (CECs) in patients with advanced non-small cell lung cancer (NSCLC). A total of 102 newly diagnosed advanced NSCLC patients were enrolled in this study. The amount of CECs was enumerated by flow cytometry (CD45- CD31+ CD146+) at baseline. CEC counts of 56 patients were detected before and after two cycles of chemotherapy. We correlated the baseline and reduction of CECs after therapy with objective response rate (ORR), progression-free survival (PFS), and overall survival (OS). The CEC level was significantly higher in advanced NSCLC patients, ranging from 57 to 1300 cells/10(5) cells (mean ± SD = 299 ± 221 cells/10(5) cells), than in patients with benign lesions (205 ± 97 cells/10(5) cells) and healthy volunteers (117 ± 33 cells/10(5) cells). When the cutoff value of CEC counts was 210 cells/10(5) cells, there was no significant association between CEC counts and OR/PFS/OS of the enrolled patients. However, patients with CEC response after chemotherapy have more chances to achieve OR (P < 0.001), and such patients showed longer PFS (P = 0.048) and OS (P = 0.018) than those without CEC response. In the multivariate analysis, the independent prognostic roles of brain metastasis (HR 6.165, P = 0.001), and CEC response (HR 0.442, P = 0.044) were found. The CEC counts could be considered as diagnostic biomarker for advanced NSCLC patients. And the reduction of CECs after treatment might be more ideal than the baseline CEC counts as a predictive or prognostic factor in patients treated with chemotherapy or anti-angiogenic therapy. PMID:26084612

  8. The Clinical Significance of MiR-148a as a Predictive Biomarker in Patients with Advanced Colorectal Cancer

    PubMed Central

    Takahashi, Masanobu; Cuatrecasas, Miriam; Balaguer, Francesc; Hur, Keun; Toiyama, Yuji; Castells, Antoni; Boland, C. Richard; Goel, Ajay

    2012-01-01

    Aim Development of robust prognostic and/or predictive biomarkers in patients with colorectal cancer (CRC) is imperative for advancing treatment strategies for this disease. We aimed to determine whether expression status of certain miRNAs might have prognostic/predictive value in CRC patients treated with conventional cytotoxic chemotherapies. Methods We studied a cohort of 273 CRC specimens from stage II/III patients treated with 5-fluorouracil-based adjuvant chemotherapy and stage IV patients subjected to 5-fluorouracil and oxaliplatin-based chemotherapy. In a screening set (n = 44), 13 of 21 candidate miRNAs were successfully quantified by multiplex quantitative RT-PCR. In the validation set comprising of the entire patient cohort, miR-148a expression status was assessed by quantitative RT-PCR, and its promoter methylation was quantified by bisulfite pyrosequencing. Lastly, we analyzed the associations between miR-148a expression and patient survival. Results Among the candidate miRNAs studied, miR-148a expression was most significantly down-regulated in advanced CRC tissues. In stage III and IV CRC, low miR-148a expression was associated with significantly shorter disease free-survival (DFS), a worse therapeutic response, and poor overall survival (OS). Furthermore, miR-148a methylation status correlated inversely with its expression, and was associated with worse survival in stage IV CRC. In multivariate analysis, miR-148a expression was an independent prognostic/predictive biomarker for advanced CRC patients (DFS in stage III, low vs. high expression, HR 2.11; OS in stage IV, HR 1.93). Discussion MiR-148a status has a prognostic/predictive value in advanced CRC patients treated with conventional chemotherapy, which has important clinical implications in improving therapeutic strategies and personalized management of this malignancy. PMID:23056401

  9. 15 CFR 713.4 - Advance declaration requirements for additionally planned production, processing, or consumption...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING...)(ii) of the CWCR will produce, process, or consume a Schedule 2 chemical above the applicable...)(ii) of the CWCR an additional Schedule 2 chemical above the applicable declaration threshold;...

  10. 15 CFR 713.4 - Advance declaration requirements for additionally planned production, processing, or consumption...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING...)(ii) of the CWCR will produce, process, or consume a Schedule 2 chemical above the applicable...)(ii) of the CWCR an additional Schedule 2 chemical above the applicable declaration threshold;...

  11. 15 CFR 713.4 - Advance declaration requirements for additionally planned production, processing, or consumption...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING...)(ii) of the CWCR will produce, process, or consume a Schedule 2 chemical above the applicable...)(ii) of the CWCR an additional Schedule 2 chemical above the applicable declaration threshold;...

  12. 15 CFR 713.4 - Advance declaration requirements for additionally planned production, processing, or consumption...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING...)(ii) of the CWCR will produce, process, or consume a Schedule 2 chemical above the applicable...)(ii) of the CWCR an additional Schedule 2 chemical above the applicable declaration threshold;...

  13. 78 FR 54791 - Proposed Additional Airworthiness Design Standards: Advanced Avionics Under the Special Class...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-06

    ... Regulations and two additional design criteria issued on September 2, 2003 (68 FR 56809). The regulation... 75 FR 32576. In conjunction with the expansion to Night-VFR operations intergrated avionic displays...-49, ``Electrical bonding and protection against lightning and static electricity'' 14 CFR 23.1307...

  14. Recent advances in the development of composites based on the NCNS resins. [addition polymerized polyaromatic melamines

    NASA Technical Reports Server (NTRS)

    Kray, R. J.

    1976-01-01

    The NCNS resins, a new class of addition polymerized polyaromatic melamines, have undergone further development in the past year. Pilot plant quantities of resin NCNS-12M have been made available for evaluation. High solids laminating varnishes were prepared in alcohol/ethyl acetate and alcohol/chlorinated solvent mixtures. The prepregs had sufficient room temperature stability after three month storage to retain good processing characteristics and good bonded mechanical properties. Laminates were fabricated by vacuum bag-autoclave processing and by 5 minute press molding cycles. These laminates had low flame spread and low smoke emitting properties and retained good elevated temperature properties upon long-term oxidative aging. Humidity aging studies were carried out for 30 days at 95% R.H., 120 F. on NCNS/graphite fiber laminates. Initial results indicate that the NCNS resins, particularly those prepared from polymethylene polyphenylamines, are resistant to environmental degradation of elevated temperature mechanical strength.

  15. Risk of adverse events with bevacizumab addition to therapy in advanced non-small-cell lung cancer: a meta-analysis of randomized controlled trials

    PubMed Central

    Lai, Xi-Xi; Xu, Ren-Ai; Yu-Ping, Li; Yang, Han

    2016-01-01

    Background Bevacizumab, a monoclonal antibody against vascular endothelial growth factor ligand, has shown survival benefits in the treatment of many types of malignant tumors, including non-small-cell lung cancer (NSCLC). We conducted this systematic review and meta-analysis to investigate the risk of the most clinically relevant adverse events related to bevacizumab in advanced NSCLC. Methods Databases from PubMed, Web of Science, and Cochrane Library up to August 2015, were searched to identify relevant studies. We included prospective randomized controlled Phase II/III clinical trials that compared therapy with or without bevacizumab for advanced NSCLC. Summary relative risk (RR) and 95% confidence intervals were calculated using random effects or fixed effects according to the heterogeneity among included trials. Results A total of 3,745 patients from nine clinical trials were included in the meta-analysis. Summary RRs showed a statistically significant bevacizumab-associated increased risk in three of the adverse outcomes studied: proteinuria (RR =7.55), hypertension (RR =5.34), and hemorrhagic events (RR =2.61). No statistically significant differences were found for gastrointestinal perforation (P=0.60), arterial and venous thromboembolic events (P=0.35 and P=0.92, respectively), or fatal events (P=0.29). Conclusion The addition of bevacizumab to therapy in advanced NSCLC did significantly increase the risk of proteinuria, hypertension, and hemorrhagic events but not arterial/venous thromboembolic events, gastrointestinal perforation, or fatal adverse events. PMID:27143937

  16. Voice measures of workload in the advanced flight deck: Additional studies

    NASA Technical Reports Server (NTRS)

    Schneider, Sid J.; Alpert, Murray

    1989-01-01

    These studies investigated acoustical analysis of the voice as a measure of workload in individual operators. In the first study, voice samples were recorded from a single operator during high, medium, and low workload conditions. Mean amplitude, frequency, syllable duration, and emphasis all tended to increase as workload increased. In the second study, NASA test pilots performed a laboratory task, and used a flight simulator under differing work conditions. For two of the pilots, high workload in the simulator brought about greater amplitude, peak duration, and stress. In both the laboratory and simulator tasks, high workload tended to be associated with more statistically significant drop-offs in the acoustical measures than were lower workload levels. There was a great deal of intra-subject variability in the acoustical measures. The results suggested that in individual operators, increased workload might be revealed by high initial amplitude and frequency, followed by rapid drop-offs over time.

  17. Efficacy of the Additional Neoadjuvant Chemotherapy to Concurrent Chemoradiotherapy for Patients with Locoregionally Advanced Nasopharyngeal Carcinoma: a Bayesian Network Meta-analysis of Randomized Controlled Trials

    PubMed Central

    Chen, Yu-Pei; Guo, Rui; Liu, Na; Liu, Xu; Mao, Yan-Ping; Tang, Ling-Long; Zhou, Guan-Qun; Lin, Ai-Hua; Sun, Ying; Ma, Jun

    2015-01-01

    Background: Due to the lack of studies, it remains unclear whether the additional neoadjuvant chemotherapy (NACT) to concurrent chemoradiotherapy (CCRT) is superior to CCRT alone for locoregionally advanced nasopharyngeal carcinoma (NPC). The main objective of this Bayesian network meta-analysis was to determine the efficacy of NACT+CCRT as compared with CCRT alone. Methods: We comprehensively searched databases and extracted data from randomized controlled trials involving NPC patients who received NACT+CCRT, CCRT, NACT+radiotherapy (RT), or RT. Overall survival (OS) with hazard ratio (HR), and locoregional recurrence rate (LRR) and distant metastasis rate (DMR) with relative risks (RRs), were concerned. Results: Nine trials involving 1988 patients were analyzed. In the network meta-analysis, there was significant benefit of NACT+CCRT over CCRT for DMR (RR=0.54, 95% credible interval [CrI]=0.27-0.94). However, NACT+CCRT had a tendency to worsen locoregional control significantly as compared with CCRT (RR =1.71, 95%CrI =0.94-2.84), and no significant improvement in OS was found (HR =0.73, 95%CrI=0.40-1.23). Conclusions: NACT+CCRT is associated with reduced distant failure as compared with CCRT alone, and whether the additional NACT can improve survival for locoregionally advanced NPC should be further explored. Optimizing regimens and identifying patients at high risk of metastasis may enhance the efficacy of NACT+CCRT. PMID:26284140

  18. Interaction Between the FOXO1A-209 Genotype and Tea Drinking Is Significantly Associated with Reduced Mortality at Advanced Ages.

    PubMed

    Zeng, Yi; Chen, Huashuai; Ni, Ting; Ruan, Rongping; Nie, Chao; Liu, Xiaomin; Feng, Lei; Zhang, Fengyu; Lu, Jiehua; Li, Jianxin; Li, Yang; Tao, Wei; Gregory, Simon G; Gottschalk, William; Lutz, Michael W; Land, Kenneth C; Yashin, Anatoli; Tan, Qihua; Yang, Ze; Bolund, Lars; Ming, Qi; Yang, Huanming; Min, Junxia; Willcox, D Craig; Willcox, Bradley J; Gu, Jun; Hauser, Elizabeth; Tian, Xiao-Li; Vaupel, James W

    2016-06-01

    On the basis of the genotypic/phenotypic data from Chinese Longitudinal Healthy Longevity Survey (CLHLS) and Cox proportional hazard model, the present study demonstrates that interactions between carrying FOXO1A-209 genotypes and tea drinking are significantly associated with lower risk of mortality at advanced ages. Such a significant association is replicated in two independent Han Chinese CLHLS cohorts (p = 0.028-0.048 in the discovery and replication cohorts, and p = 0.003-0.016 in the combined dataset). We found the associations between tea drinking and reduced mortality are much stronger among carriers of the FOXO1A-209 genotype compared to non-carriers, and drinking tea is associated with a reversal of the negative effects of carrying FOXO1A-209 minor alleles, that is, from a substantially increased mortality risk to substantially reduced mortality risk at advanced ages. The impacts are considerably stronger among those who carry two copies of the FOXO1A minor allele than those who carry one copy. On the basis of previously reported experiments on human cell models concerning FOXO1A-by-tea-compounds interactions, we speculate that results in the present study indicate that tea drinking may inhibit FOXO1A-209 gene expression and its biological functions, which reduces the negative impacts of FOXO1A-209 gene on longevity (as reported in the literature) and offers protection against mortality risk at oldest-old ages. Our empirical findings imply that the health outcomes of particular nutritional interventions, including tea drinking, may, in part, depend upon individual genetic profiles, and the research on the effects of nutrigenomics interactions could potentially be useful for rejuvenation therapies in the clinic or associated healthy aging intervention programs. PMID:26414954

  19. Additional treatment of wastewater reduces endocrine disruption in wild fish--a comparative study of tertiary and advanced treatments.

    PubMed

    Baynes, Alice; Green, Christopher; Nicol, Elizabeth; Beresford, Nicola; Kanda, Rakesh; Henshaw, Alan; Churchley, John; Jobling, Susan

    2012-05-15

    Steroid estrogens are thought to be the major cause of feminization (intersex) in wild fish. Widely used wastewater treatment technologies are not effective at removing these contaminants to concentrations thought to be required to protect aquatic wildlife. A number of advanced treatment processes have been proposed to reduce the concentrations of estrogens entering the environment. Before investment is made in such processes, it is imperative that we compare their efficacy in terms of removal of steroid estrogens and their feminizing effects with other treatment options. This study assessed both steroid removal and intersex induction in adult and early life stage fish (roach, Rutilus rutilus). Roach were exposed directly to either secondary (activated sludge process (ASP)), tertiary (sand filtrated (SF)), or advanced (chlorine dioxide (ClO(2)), granular activated charcoal (GAC)) treated effluents for six months. Surprisingly, both the advanced GAC and tertiary SF treatments (but not the ClO(2) treatment) significantly removed the intersex induction associated with the ASP effluent; this was not predicted by the steroid estrogen measurements, which were higher in the tertiary SF than either the GAC or the ClO(2). Therefore our study highlights the importance of using both biological and chemical analysis when assessing new treatment technologies. PMID:22500691

  20. OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS & HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION

    SciTech Connect

    Alan Black; Arnis Judzis

    2004-10-01

    The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit-fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all major preparations for the high pressure drilling campaign. Baker Hughes encountered difficulties in providing additional pumping capacity before TerraTek's scheduled relocation to another facility, thus the program was delayed further to accommodate the full testing program.

  1. Postmarket safety in Canada: are significant therapeutic advances and biologics less safe than other drugs? A cohort study

    PubMed Central

    Lexchin, Joel

    2014-01-01

    Objectives Examine the probability of new active substances (NASs) approved in Canada between 1 January 1997 and 31 March 2012 acquiring a serious postmarket safety warning. Design Cohort study. Data sources Annual reports of the Therapeutic Products Directorate and the Biologic and Genetic Therapies Directorate; evaluations of therapeutic innovation from the Patented Medicine Prices Review Board and Prescrire International; MedEffect Canada website. Interventions Postmarket regulatory safety warning or withdrawal from market due to safety reasons. Primary and secondary outcome measures Compare the probability of acquiring a postmarket safety warning in Canada in four different groups of drugs: (1) traditional medications versus biologics; (2) medications that offer significant new therapeutic benefits versus those that do not. Determine how well the type of review that an NAS received from Health Canada predicted the product's postmarket therapeutic value. Results The probability of a traditional NAS acquiring a serious safety warning and/or being withdrawn was 29.9% (95% CI 21.8% to 40.2%) vs 27.3% (95% CI 18.2% to 39.7%) for an NAS of biological origin (p=0.47, log-rank test). For medications that were significant therapeutic advances the probability was 40.2% (95% CI 24.5% to 60.9%) vs 33.9% (95% CI 26.4% to 42.7%) for those that were not (p=0.18, log-rank test). Health Canada was 77.4% accurate in predicting the therapeutic importance of an NAS. Conclusions There was no difference in postmarket regulatory safety action between traditional medications and biologics and no difference between drugs with significant therapeutic benefits and those without. Although these results draw on Canadian data, they are likely to be relevant internationally. Further research should assess whether the current level of premarket safety evaluation is acceptable. PMID:24549164

  2. Additional mutations in SRSF2, ASXL1 and/or RUNX1 identify a high-risk group of patients with KIT D816V(+) advanced systemic mastocytosis.

    PubMed

    Jawhar, M; Schwaab, J; Schnittger, S; Meggendorfer, M; Pfirrmann, M; Sotlar, K; Horny, H-P; Metzgeroth, G; Kluger, S; Naumann, N; Haferlach, C; Haferlach, T; Valent, P; Hofmann, W-K; Fabarius, A; Cross, N C P; Reiter, A

    2016-01-01

    Most patients with KIT D816V(+) advanced systemic mastocytosis (SM) are characterized by somatic mutations in additional genes. We sought to clarify the prognostic impact of such mutations. Genotype and clinical characteristics of 70 multi-mutated KIT D816V(+) advanced SM patients were included in univariate and multivariate analyses. The most frequently identified mutated genes were TET2 (n=33 of 70 patients), SRSF2 (n=30), ASXL1 (n=20), RUNX1 (n=16) and JAK2 (n=11). In univariate analysis, overall survival (OS) was adversely influenced by mutations in SRSF2 (P<0.0001), ASXL1 (P=0.002) and RUNX1 (P=0.03), but was not influenced by mutations in TET2 or JAK2. In multivariate analysis, SRSF2 and ASXL1 remained the most predictive adverse indicators concerning OS. Furthermore, we found that inferior OS and adverse clinical characteristics were significantly influenced by the number of mutated genes in the SRSF2/ASXL1/RUNX1 (S/A/R) panel (P<0.0001). In conclusion, the presence and number of mutated genes within the S/A/R panel are adversely associated with advanced disease and poor survival in KIT D816V(+) SM. On the basis of these findings, inclusion of molecular markers should be considered in upcoming prognostic scoring systems for patients with SM. PMID:26464169

  3. The prognostic significance of left ventricular ejection fraction in patients with advanced cancer treated in phase I clinical trials

    PubMed Central

    Said, R.; Banchs, J.; Wheler, J.; Hess, K. R.; Falchook, G.; Fu, S.; Naing, A.; Hong, D.; Piha-Paul, S.; Ye, Y.; Yeh, E.; Wolff, R. A.; Tsimberidou, A. M.

    2014-01-01

    Background New targeted agents may cause acute cardiac events. The purpose of our study was to investigate the incidence and the prognostic significance of left ventricular ejection fraction (LVEF) in phase I trials. Patients and methods Between October 2008 and September 2011, the records of 1166 consecutive patients with advanced cancer treated in the Phase I Clinic who underwent echocardiography were retrospectively reviewed. Results Most of the patients were White (78%), and the most common tumor types were colorectal cancer and melanoma. Of 1166 patients, 177 (15.2%) patients had an LVEF of <50%. No difference in overall survival (OS) between patients with LVEF ≥ 50% and patients with LVEF < 50% was seen (median OS 7.4 versus 7.0 months, P = 0.84). Patients with LVEF ≤ 35% had shorter survival compared with those with LVEF between 35% and 50% (median 4.2 versus 8.0 months; P = 0.005). In multivariate analysis of patients with LVEF < 50%, independent factors predicting longer survival were LVEF > 35%, ≤2 prior systemic therapies, ≤2 metastatic sites, and normal lactate dehydrogenase and albumin levels. Conclusion Echocardiography would improve patient selection for enrollment in phase I clinical trials. These data suggest that it is safe to treat patients with LVEF between 35% and 50%. PMID:24356639

  4. Additive antileukemia effects by GFI1B- and BCR-ABL-specific siRNA in advanced phase chronic myeloid leukemic cells.

    PubMed

    Koldehoff, M; Zakrzewski, J L; Beelen, D W; Elmaagacli, A H

    2013-07-01

    Previous studies demonstrated selective inhibition of the BCR-ABL (breakpoint cluster region-Abelson murine leukemia oncogene) tyrosine kinase by RNA interference in leukemic cells. In this study, we evaluated the effect of BCR-ABL small interfering RNA (siRNA) and GFI1B siRNA silencing on chronic myeloid leukemia (CML) cells in myeloid blast crises. The GFI1B gene was mapped to chromosome 9 and is, therefore, located downstream of the BCR-ABL translocation in CML cells. Co-transfection of BCR-ABL siRNA and GFI1B siRNA dramatically decreased cell viability and significantly induced apoptosis and inhibited proliferation in K562 cells (P<0.0001) and primary advanced phase CML cells (P<0.0001) versus controls. Furthermore, combining of BCR-ABL siRNA and GFI1B siRNA significantly modified the expression of several relevant genes including Myc, MDR1, MRP1 and tyrosyl-phosphoproteins in primary CML cells. Our data suggest that silencing of both BCR-ABL siRNA and GFI1B siRNA is associated with an additive antileukemic effect against K562 cells and primary advanced CML cells, further validating these genes as attractive therapeutic targets. PMID:23788109

  5. [A CASE OF ADVANCED BLADDER NEUROENDOCRINE CARCINOMA (SMALL CELL CARCINOMA) SIGNIFICANTLY IMPROVED BY LOW DOSE OF ORAL TEGAFUR-URACIL].

    PubMed

    Nomi, Hayahito; Takahara, Kiyoshi; Minami, Koichiro; Maenosono, Ryoichi; Matsunaga, Tomohisa; Yoshikawa, Yuki; Tsujino, Takuya; Hirano, Hajime; Inamoto, Teruo; Yamamoto, Ikuhisa; Tsuji, Motomu; Kiyama, Satoshi; Azuma, Haruhito

    2015-10-01

    A 81-old-woman underwent a transurethral resection of bladder tumor (TURBT) at a nearby hospital in April 2011. The diagnosis was invasive urothelial carcinoma, G3 with a component of bladder small cell carcinoma, T1 or more. She was recommended to visit our hospital for combined modality therapy of bladder cancer, but she refused the treatment for over one year. In May 2012, she came to our hospital with the chief complaint of pain at urination. Cystoscopy revealed non-papillary sessile tumor in the top of the bladder, and CT scan demonstrated the presence of the right obturator lymph nodes swollen up to 1.2 cm in size. The second TURBT was performed and the diagnosis was bladder small cell carcinoma (pT3N2M0) according to urothelial cancer guidelines of the Japanese Urological Association (JUA). Because she strongly refused hospitalization anymore, we started daily oral intake of low dose Tegafur-Uracil (100 mg) for the treatment. After one month, the serum Neuron-Specific Enolase (NSE; tumor maker of small cell cancer) level was elevated to 27.6 ng/ml and the right obturator lymph node was enlarged up to 1.9 cm. Therefore, the Trgafur-Uracil dose was increased to 200 mg daily. After then, the serum NSE level was decreased to 15.5 ng/ml following reduction in size of the obturator lymph nodes with partial response in December 2013. After two years of follow-up period, her regular urine test showed normal findings, and no apparent recurrence was detected on urinary bladder with MRI and Cystoscopy. This is a case of advanced bladder small cell carcinoma significantly improved by oral administration of Tegafur-Uracil 200 mg/day for over 2 years. PMID:26717786

  6. Tribological characteristics of bisphenol AF bis(diphenyl phosphate) as an antiwear additive in polyalkylene glycol and polyurea grease for significantly improved lubrication

    NASA Astrophysics Data System (ADS)

    Zhu, Lili; Wu, Xinhu; Zhao, Gaiqing; Wang, Xiaobo

    2016-02-01

    A new antiwear additive of Bisphenol AF bis(diphenyl phosphate) (BAFDP) was synthesized and characterized. The tribological behaviors of the additive for polyalkylene glycol (PAG) and polyurea grease (PG) application in steel/steel contacts were evaluated on an Optimol SRV-IV oscillating reciprocating friction and wear tester at elevated temperature. The results revealed that BAFDP could drastically reduce friction and wear of sliding pairs in both PAG and also in PG at 100 °C. The tribological properties of BAFDP are superior to the normally used zinc dialkyldithiophosphate-based additive package (ZDDP) in PAG and PG. Moreover, BAFDP as additive for PAG and PG displays relatively significant tribological properties in temperature-ramp tests by performing well at 50-300 °C, indicating the excellent high temperature friction reduction and anti-wear capacity of BAFDP. XPS results showed that boundary lubrication films composed of Fe(OH)O, Fe3O4, FePO4, FeF2, FeF3, compounds containing the Psbnd O bonds, nitrogen oxide, and so forth, were formed on the worn surface, which contributed to excellent friction reduction and antiwear performance.

  7. The Significance of Tumoral ERCC1 Status in Patients With Locally Advanced Cervical Cancer Treated With Chemoradiation Therapy: A Multicenter Clinicopathologic Analysis

    SciTech Connect

    Doll, Corinne M.; Aquino-Parsons, Christina; Pintilie, Melania; Petrillo, Stephanie K.; Milosevic, Michael; Craighead, Peter S.; Clarke, Blaise; Lees-Miller, Susan P.; Fyles, Anthony W.; Magliocco, Anthony M.

    2013-03-01

    Purpose: ERCC1 (excision repair cross-complementation group 1) expression has been shown to be a molecular marker of cisplatin resistance in many tumor sites, but has not been well studied in cervical cancer patients. The purpose of this study was to measure tumoral ERCC1 in patients with locally advanced cervical cancer treated with chemoradiation therapy (CRT) in a large multicenter cohort, and to correlate expression with clinical outcome parameters. Methods and Materials: A total of 264 patients with locally advanced cervical cancer, treated with curative-intent radical CRT from 3 major Canadian cancer centers were evaluated. Pretreatment formalin-fixed, paraffin-embedded tumor specimens were retrieved, and tissue microarrays were constructed. Tumoral ERCC1 (FL297 antibody) was measured using AQUA (R) technology. Statistical analysis was performed to determine the significance of clinical factors and ERCC1 status with progression-free survival (PFS) and overall survival (OS) at 5 years. Results: The majority of patients had International Federation of Gynecology and Obstetrics (FIGO) stage II disease (n=119, 45%); median tumor size was 5 cm. OS was associated with tumor size (HR 1.16, P=.018), pretreatment hemoglobin status (HR 2.33, P=.00027), and FIGO stage. In addition, tumoral ERCC1 status (nuclear to cytoplasmic ratio) was associated with PFS (HR 2.33 [1.05-5.18], P=.038) and OS (HR 3.13 [1.27-7.71], P=.013). ERCC1 status was not significant on multivariate analysis when the model was adjusted for the clinical factors: for PFS (HR 1.49 [0.61-3.6], P=.38); for OS (HR 2.42 [0.94-6.24] P=.067). Conclusions: In this large multicenter cohort of locally advanced cervical cancer patients treated with radical CRT, stage, tumor size, and pretreatment hemoglobin status were significantly associated with PFS and OS. ERCC1 status appears to have prognostic impact on univariate analysis in these patients, but was not independently associated with outcome on

  8. Significance of Additional Non-Mass Enhancement in Patients with Breast Cancer on Preoperative 3T Dynamic Contrast Enhanced MRI of the Breast

    PubMed Central

    Cho, Yun Hee; Cho, Kyu Ran; Park, Eun Kyung; Seo, Bo Kyoung; Woo, Ok Hee; Cho, Sung Bum; Bae, Jeoung Won

    2016-01-01

    Background In preoperative assessment of breast cancer, MRI has been shown to identify more additional breast lesions than are detectable using conventional imaging techniques. The characterization of additional lesions is more important than detection for optimal surgical treatment. Additional breast lesions can be included in focus, mass, and non-mass enhancement (NME) on MRI. According to the fifth edition of the breast imaging reporting and data system (BI-RADS®), which includes several changes in the NME descriptors, few studies to date have evaluated NME in preoperative assessment of breast cancer. Objectives We investigated the diagnostic accuracy of BI-RADS descriptors in predicting malignancy for additional NME lesions detected on preoperative 3T dynamic contrast enhanced MRI (DCE-MRI) in patients with newly diagnosed breast cancer. Patients and Methods Between January 2008 and December 2012, 88 patients were enrolled in our study, all with NME lesions other than the index cancer on preoperative 3T DCE-MRI and all with accompanying histopathologic examination. The MRI findings were analyzed according to the BI-RADS MRI lexicon. We evaluated the size, distribution, internal enhancement pattern, and location of NME lesions relative to the index cancer (i.e., same quadrant, different quadrant, or contralateral breast). Results On histopathologic analysis of the 88 NME lesions, 73 (83%) were malignant and 15 (17%) were benign. Lesion size did not differ significantly between malignant and benign lesions (P = 0.410). Malignancy was more frequent in linear (P = 0.005) and segmental (P = 0.011) distributions, and benignancy was more frequent in focal (P = 0.004) and regional (P < 0.001) NME lesions. The highest positive predictive value (PPV) for malignancy occurred in segmental (96.8%), linear (95.1%), clustered ring (100%), and clumped (92.0%) enhancement. Asymmetry demonstrated a high positive predictive value of 85.9%. The frequency of malignancy was higher

  9. Feasibility, tolerability, and efficacy of the concurrent addition of erlotinib to thoracic radiotherapy in locally advanced unresectable non-small-cell lung cancer: a Phase II trial

    PubMed Central

    Martínez, Enrique; Martínez, Maite; Rico, Mikel; Hernández, Berta; Casas, Francesc; Viñolas, Nuria; Pérez-Casas, Ana; Dómine, Manuel; Mínguez, Julián

    2016-01-01

    Purpose Although many studies have confirmed the synergic effects of combining chemotherapy (CT) and radiotherapy (RT), clinical data evaluating safety and efficacy of erlotinib in combination with RT in locally advanced non-small-cell lung cancer (NSCLC) are limited. The aim of this study was to determine the feasibility, tolerability, and efficacy of the concurrent addition of erlotinib to the standard three-dimensional conformal thoracic RT in patients with unresectable or locally advanced NSCLC who are not candidates for receiving standard CT. Patients and methods Feasibility and tolerability, assessed by evaluating adverse events (AEs), and effectiveness, by calculating progression-free survival (PFS), overall survival (OS), cancer-specific survival (CSS), and objective response rate (ORR), were analyzed in 30 patients receiving RT alone and 60 receiving RT and erlotinib. Results Erlotinib with RT showed an extended CSS and a higher rate of complete responses compared with RT alone. No differences between groups were found regarding OS, PFS, and ORR. AEs were significantly higher in the combined treatment, which mainly included cutaneous toxicity, dyspnea, fatigue, hyporexia, diarrhea, and infection. Erlotinib did not increase the toxicity produced by RT. Conclusion The combination of erlotinib with RT produced, in our study, a scarce clinical benefit in the treatment of unresectable or locally advanced NSCLC, limited to complete responses and longer CSS rate compared with RT alone. Increased toxicity events were associated with combined therapy, which mainly included cutaneous toxicity. In our opinion, further studies in molecularly unselected lung cancer patients treated with EGFR TKIs and RT are not indicated. The use of biomarkers for the identification of patients that are most likely to benefit from this treatment is an essential next step in the research of this condition. PMID:27042098

  10. A Study to Determine if Addition of Palatal Petechiae to Centor Criteria Adds More Significance to Clinical Diagnosis of Acute Strep Pharyngitis in Children.

    PubMed

    Nibhanipudi, Kumara V

    2016-01-01

    Objective. A study to determine if addition of palatal petechiae to Centor criteria adds more value for clinical diagnosis of acute strep pharyngitis in children. Hypothesis. In children, Centor Criteria does not cover all the symptoms and signs of acute strep pharyngitis. We hypothesize that addition of palatal petechiae to Centor Criteria will increase the possibility of clinical diagnosis of group A streptococcal pharyngitis in children. Methods. One hundred patients with a complaint of sore throat were enrolled in the study. All the patients were examined clinically using the Centor Criteria. They were also examined for other signs and symptoms like petechial lesions over the palate, abdominal pain, and skin rash. All the patients were given rapid strep tests, and throat cultures were sent. No antibiotics were given until culture results were obtained. Results. The sample size was 100 patients. All 100 had fever, sore throat, and erythema of tonsils. Twenty of the 100 patients had tonsillar exudates, 85/100 had tender anterior cervical lymph nodes, and 86/100 had no cough. In total, 9 out of the 100 patients had positive throat cultures. We observed that petechiae over the palate, a very significant sign, is not included in the Centor Criteria. Palatal petechiae were present in 8 out of the 100 patients. Six out of these 8 with palatal petechiae had positive throat culture for strep (75%). Only 7 out of 20 with exudates had positive strep culture. Sixteen out of the 100 patients had rapid strep test positive. Those 84/100 who had negative rapid strep also had negative throat culture. Statistics. We used Fisher's exact test, comparing throat culture positive and negative versus presence of exudates and palatal hemorrhages with positive and negative throat cultures and the resultant P value <.0001. Conclusion. Our study concludes that addition of petechiae over the palate to Centor Criteria will increase the possibility of diagnosing acute group A streptococcal

  11. A Study to Determine if Addition of Palatal Petechiae to Centor Criteria Adds More Significance to Clinical Diagnosis of Acute Strep Pharyngitis in Children

    PubMed Central

    Nibhanipudi, Kumara V.

    2016-01-01

    Objective. A study to determine if addition of palatal petechiae to Centor criteria adds more value for clinical diagnosis of acute strep pharyngitis in children. Hypothesis. In children, Centor Criteria does not cover all the symptoms and signs of acute strep pharyngitis. We hypothesize that addition of palatal petechiae to Centor Criteria will increase the possibility of clinical diagnosis of group A streptococcal pharyngitis in children. Methods. One hundred patients with a complaint of sore throat were enrolled in the study. All the patients were examined clinically using the Centor Criteria. They were also examined for other signs and symptoms like petechial lesions over the palate, abdominal pain, and skin rash. All the patients were given rapid strep tests, and throat cultures were sent. No antibiotics were given until culture results were obtained. Results. The sample size was 100 patients. All 100 had fever, sore throat, and erythema of tonsils. Twenty of the 100 patients had tonsillar exudates, 85/100 had tender anterior cervical lymph nodes, and 86/100 had no cough. In total, 9 out of the 100 patients had positive throat cultures. We observed that petechiae over the palate, a very significant sign, is not included in the Centor Criteria. Palatal petechiae were present in 8 out of the 100 patients. Six out of these 8 with palatal petechiae had positive throat culture for strep (75%). Only 7 out of 20 with exudates had positive strep culture. Sixteen out of the 100 patients had rapid strep test positive. Those 84/100 who had negative rapid strep also had negative throat culture. Statistics. We used Fisher’s exact test, comparing throat culture positive and negative versus presence of exudates and palatal hemorrhages with positive and negative throat cultures and the resultant P value <.0001. Conclusion. Our study concludes that addition of petechiae over the palate to Centor Criteria will increase the possibility of diagnosing acute group A streptococcal

  12. A significant response to sorafenib in a woman with advanced lung adenocarcinoma and a BRAF non-V600 mutation.

    PubMed

    Sereno, María; Moreno, Victor; Moreno Rubio, Juan; Gómez-Raposo, César; García Sánchez, Sagrario; Hernández Jusdado, Rebeca; Falagan, Sandra; Zambrana Tébar, Francisco; Casado Sáenz, Enrique

    2015-10-01

    Lung adenocarcinoma includes recurrent activating oncogenic mutations (EGFR, EML4-ALK, ROS1) that have been associated with response to EGFR and ALK inhibitors. Platinum-based chemotherapy is the standard therapy for non-oncodrivers population. Sorafenib is a small molecule that blocks the activation of C-RAF, B-RAF, c-KIT, FLT-3, RET, VEGFR-2, VEGFR-3 and PDGFR approved for advanced renal cell and hepatocellular carcinoma (b, c). Many studies have evaluated sorafenib in advanced non-small-cell lung cancer (NSCLC), with different results. We present a case report of a patient with NSCLC and the BRAF G469R mutation who showed a dramatic response to sorafenib. PMID:26237499

  13. Post-chemotherapy surgery in advanced non-seminomatous germ-cell testicular tumours: the significance of histology with particular reference to differentiated (mature) teratoma.

    PubMed Central

    Tait, D.; Peckham, M. J.; Hendry, W. F.; Goldstraw, P.

    1984-01-01

    Of a total of 307 patients treated with chemotherapy for advanced non-seminomatous germ-cell testicular tumours between 1976 and 1983, 73 (23.8%) had masses excised after treatment. Resected tissue showed residual malignancy in 16 (22%), fibrosis and necrosis in 25 (34%) and differentiated (mature teratoma) in 32 (44%). Of the 16 patients with tumour only 7 (44%) are alive and disease-free compared with 21/25 (84%) and 27/32 (84%) for fibrosis/necrosis and differentiated teratoma respectively. In addition to histological evidence of residual tumour, elevated serum markers at the time of surgery and/or incomplete excision of residual masses were adverse prognostic features. Of 12 patients with differentiated teratoma or fibrosis who had incomplete resections or densely adherent masses excised with difficulty, 7 subsequently relapsed. The majority of differentiated teratoma patients (75%) had evidence of differentiation in their primary tumours; 88% showed cystic change in metastases and almost one-third showed an increase in the size of metastases during chemotherapy. The data suggest that post-chemotherapy surgery may have a therapeutic as well as a diagnostic role and that complete excision of residual disease should be attempted even if resection at one site has shown either fibrosis or differentiated teratoma. The significance of these findings in relation to treatment induced differentiation is discussed. PMID:6093838

  14. Addition of a third field significantly increases dose to the brachial plexus for patients undergoing tangential whole-breast therapy after lumpectomy

    SciTech Connect

    Stanic, Sinisa; Mathai, Mathew; Mayadev, Jyoti S.; Do, Ly V.; Purdy, James A.; Chen, Allen M.

    2012-07-01

    Our goal was to evaluate brachial plexus (BP) dose with and without the use of supraclavicular (SCL) irradiation in patients undergoing breast-conserving therapy with whole-breast radiation therapy (RT) after lumpectomy. Using the standardized Radiation Therapy Oncology Group (RTOG)-endorsed guidelines delineation, we contoured the BP for 10 postlumpectomy breast cancer patients. The radiation dose to the whole breast was 50.4 Gy using tangential fields in 1.8-Gy fractions, followed by a conedown to the operative bed using electrons (10 Gy). The prescription dose to the SCL field was 50.4 Gy, delivered to 3-cm depth. The mean BP volume was 14.5 {+-} 1.5 cm{sup 3}. With tangential fields alone, the median mean dose to the BP was 0.57 Gy, the median maximum dose was 1.93 Gy, and the irradiated volume of the BP receiving 40, 45, and 50 Gy was 0%. When the third (SCL field) was added, the dose to the BP was significantly increased (P = .01): the median mean dose to the BP was 40.60 Gy, and the median maximum dose was 52.22 Gy. With 3-field RT, the median irradiated volume of the BP receiving 40, 45, and 50 Gy was 83.5%, 68.5%, and 24.6%, respectively. The addition of the SCL field significantly increases dose to the BP. The possibility of increasing the risk of BP morbidity should be considered in the context of clinical decision making.

  15. Multiparametric PET/CT-perfusion does not add significant additional information for initial staging in lung cancer compared with standard PET/CT

    PubMed Central

    2014-01-01

    Background The purpose of this study was to assess the relationship of CT-perfusion (CTP), 18F-FDG-PET/CT and histological parameters, and the possible added value of CTP to FDG-PET/CT in the initial staging of lung cancer. Methods Fifty-four consecutive patients (median age 65 years, 15 females, 39 males) with suspected lung cancer were evaluated prospectively by CT-perfusion scan and 18F-FDG-PET/CT scan. Overall, 46 tumors were identified. CTP parameters blood flow (BF), blood volume (BV), and mean transit time (MTT) of the tumor tissue were calculated. Intratumoral microvessel density (MVD) was assessed quantitatively. Differences in CTP parameters concerning tumor type, location, PET positivity of lymph nodes, TNM status, and UICC stage were analyzed. Spearman correlation analyses between CTP and 18F-FDG-PET/CT parameters (SUVmax, SUVmean, PETvol, and TLG), MVD, tumor size, and tumor stage were performed. Results The mean BF (mL/100 mL min-1), BV (mL/100 mL), and MTT (s) was 35.5, 8.4, and 14.2, respectively. The BF and BV were lower in tumors with PET-positive lymph nodes (p = 0.02). However, the CTP values were not significantly different among the N stages. The CTP values were not different, depending on tumor size and location. No significant correlation was found between CTP parameters and MVD. Conclusions Overall, the CTP information showed only little additional information for the initial staging compared with standard FDG-PET/CT. Low perfusion in lung tumors might possibly be associated with metabolically active regional lymph nodes. Apart from that, both CTP and 18F-FDG-PET/CT parameter sets may reflect different pathophysiological mechanisms in lung cancer. PMID:24450990

  16. Substratum morphology and significance during the Weichselian Odra ice lobe advance in northeast Germany and northwest Poland

    NASA Astrophysics Data System (ADS)

    Hermanowski, Piotr

    2015-12-01

    In the Polish Lowlands, three main ice lobes, referred to as Odra, Vistula and Mazury, formed during the Last Scandinavian Glaciation. These lobes protruded at least several kilometres beyond the main ice margin and it is believed that they represent terminal parts of the ice streams. Applied geostatistical analysis based on numerous geological data has allowed an approximate reconstruction of the Odra ice lobe substratum in the area of northwest Poland and northeast Germany. A spatial representation of the Odra lobe substratum clearly illustrates the adverse slope of the glacier bed, but also indicates areas morphologically prone to ice streaming. It is suggested that the ice took advantage of local topography that enabled advance out of the Baltic basin; consequently, the ice followed a topographic low which, in combination with favourable hydraulic conditions of its substratum, likely initiated ice streaming.

  17. Combined therapy with thrombospondin-1 type I repeats (3TSR) and chemotherapy induces regression and significantly improves survival in a preclinical model of advanced stage epithelial ovarian cancer

    PubMed Central

    Russell, Samantha; Duquette, Mark; Liu, Joyce; Drapkin, Ronny; Lawler, Jack; Petrik, Jim

    2015-01-01

    Most women are diagnosed with epithelial ovarian cancer (EOC) at advanced stage, where therapies have limited effectiveness and the long-term survival rate is low. We evaluated the effects of combined antiangiogenic and chemotherapy treatments on advanced stage EOC. Treatment of EOC cells with a recombinant version of the thrombospondin-1 type I repeats (3TSR) induced more apoptotic cell death (36.5 ± 9.6%) in vitro compared to untreated controls (4.1 ± 1.4). In vivo, tumors were induced in an orthotopic, syngeneic mouse model of advanced stage EOC. Mice were treated with 3TSR (4 mg/kg per day) alone or in combination with chemotherapy drugs delivered with maximum tolerated dose or metronomic scheduling. Pretreatment with 3TSR induced tumor regression, normalized tumor vasculature, and improved uptake of chemotherapy drugs. Combination 3TSR and metronomic chemotherapy induced the greatest tumor regression (6.2-fold reduction in size compared to PBS-treated controls) and highest survival when treatment was initiated at advanced stage. 3TSR binding to its receptor, CD36 (cluster of differentiation 36), increased binding of CD36 and SHP-1, which significantly inhibited phosphorylation of the VEGF receptor. In this study, we describe a novel treatment approach and mechanism of action with 3TSR and chemotherapy that induces regression of advanced stage EOC and significantly improves survival.—Russell, S., Duquette, M., Liu, J., Drapkin, R., Lawler, J., Petrik, J. Combined therapy with thrombospondin-1 type I repeats (3TSR) and chemotherapy induces regression and significantly improves survival in a preclinical model of advanced stage epithelial ovarian cancer. PMID:25395453

  18. An additional fluorenylmethoxycarbonyl (Fmoc) moiety in di-Fmoc-functionalized L-lysine induces pH-controlled ambidextrous gelation with significant advantages.

    PubMed

    Reddy, Samala Murali Mohan; Shanmugam, Ganesh; Duraipandy, Natarajan; Kiran, Manikantan Syamala; Mandal, Asit Baran

    2015-11-01

    In recent years, several fluorenylmethoxycarbonyl (Fmoc)-functionalized amino acids and peptides have been used to construct hydrogels, which find a wide range of applications. Although several hydrogels have been prepared from mono Fmoc-functionalized amino acids, herein, we demonstrate the importance of an additional Fmoc-moiety in the hydrogelation of double Fmoc-functionalized L-lysine [Fmoc(Nα)-L-lysine(NεFmoc)-OH, (Fmoc-K(Fmoc))] as a low molecular weight gelator (LMWG). Unlike other Fmoc-functionalized amino acid gelators, Fmoc-K(Fmoc) exhibits pH-controlled ambidextrous gelation (hydrogelation at different pH values as well as organogelation), which is significant among the gelators. Distinct fibrous morphologies were observed for Fmoc-K(Fmoc) hydrogels formed at different pH values, which are different from organogels in which Fmoc-K(Fmoc) showed bundles of long fibers. In both hydrogels and organogels, the self-assembly of Fmoc-K(Fmoc) was driven by aromatic π-π stacking and hydrogen bonding interactions, as evidenced from spectroscopic analyses. Characterization of Fmoc-K(Fmoc) gels using several biophysical methods indicates that Fmoc-K(Fmoc) has several advantages and significant importance as a LMWG. The advantages of Fmoc-K(Fmoc) include pH-controlled ambidextrous gelation, pH stimulus response, high thermal stability (∼100 °C) even at low minimum hydrogelation concentration (0.1 wt%), thixotropic property, high kinetic and mechanical stability, dye removal properties, cell viability to the selected cell type, and as a drug carrier. While single Fmoc-functionalized L-lysine amino acids failed to exhibit gelation under similar experimental conditions, the pH-controlled ambidextrous gelation of Fmoc-K(Fmoc) demonstrates the benefit of a second Fmoc moiety in inducing gelation in a LMWG. We thus strongly believe that the current findings provide a lead to construct or design various new synthetic Fmoc-based LMW organic gelators for several

  19. [Intravesical instillation of bacillus Calmette-Guerin for superficial bladder carcinoma: study on significance of additional maintenance instillations of bacillus Calmette-Guerin].

    PubMed

    Yabusaki, N; Komatsu, H; Tago, K; Yamada, Y; Ueno, A

    1991-02-01

    The efficacy of maintenance bacillus Calmette-Guerin (BCG) instillations for superficial bladder tumors was studied by prospective randomized trial. From June 1985 to October 1988, 42 newly diagnosed patients with superficial bladder carcinoma (pTa or pT1) were treated by transurethral tumor resection and subsequent five daily instillations of mitomycin C. Then they were divided into non-maintenance group (22 patients) and maintenance group (20 patients) by randomization. The patients received six weekly instillations of 80 mg of BCG. Tokyo strain (Japan BCG manufacturing Co., Tokyo, Japan), suspended in 40 ml of physiological saline, and the patients in the maintenance group received four additional instillations of BCG every three months. We could not complete the six-week course of BCG instillations in three patients due to adverse effects (two in non-maintenance group and one in maintenance group) and we lost six patients from follow-up within one year (one in non-maintenance group and five in maintenance group). The mean follow-up period of the remaining 33 patients was 28.1 months. Of these 33 patients, six patients had been found to have recurrent tumors, and the over-all three-year non-recurrence rate was 82%. Before employing BCG, when we used only mitomycin C after TUR-Bt, the three year non-recurrence rate was 58%. This indicates prophylactic effect of BCG instillations. The stage of the initial tumor of the six recurrent cases were all pT1b. The non-recurrence rate of the patients with pT1b tumor was significantly lower than that of the patients with pTa and pT1a tumor. However, multiplicity and grade of tumors did not affect the non-recurrence rate.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1904120

  20. An Investigation of the Feasibility of Obtaining Additional Subscores on the GRE Advanced Psychology Test. GRE Board Professional Report GREB No. 74-4P.

    ERIC Educational Resources Information Center

    McPeek, Miles; And Others

    This study was undertaken to determine whether additional information useful for guidance or placement could be derived from the existing Graduate Record Examinations (GRE) Advanced Psychology Test. The number of subscores currently reported is limited by the high reliability required to make admissions decisions; subscores used only for guidance…

  1. Free Radical Addition Polymerization Kinetics without Steady-State Approximations: A Numerical Analysis for the Polymer, Physical, or Advanced Organic Chemistry Course

    ERIC Educational Resources Information Center

    Iler, H. Darrell; Brown, Amber; Landis, Amanda; Schimke, Greg; Peters, George

    2014-01-01

    A numerical analysis of the free radical addition polymerization system is described that provides those teaching polymer, physical, or advanced organic chemistry courses the opportunity to introduce students to numerical methods in the context of a simple but mathematically stiff chemical kinetic system. Numerical analysis can lead students to an…

  2. [Significance of intermittent CDDP therapy for improving long-term prognosis in patients with advanced ovarian cancer].

    PubMed

    Umesaki, N; Yamamoto, A; Nakano, M; Matsumoto, Y; Tsuda, K; Kawabata, M; Sugawa, T

    1991-12-01

    In cases of advanced ovarian cancer, intermittent CDDP therapy (ICDDPT) was applied after the first operation and induction chemotherapy, and its efficacy and limit were studied. One cycle of this therapy involved consecutive 5 day CDDP treatment (25-30mg/body/day). The therapy was repeated at intervals of 3 months. In many cases, ovarian cancer was histologically rated as epithelial adenocarcinoma. The study included 18 cases in total. ICDDPT was applied to 13 cases in which no tumor mass was detected by second look operation (SLO) or which showed clinical remission after operation. Only 3 of these 13 cases showed recurrence, and all these 13 are still living. Of the 5 cases in which SLO disclosed a tumor mass or which did not show remission after the first operation, 2 died. When the survival rate after ICDDPT was compared by the Kaplan-Meier method with that of controls without CDDP therapy, the effectiveness of ICDDPT was demonstrated. The survival rate could therefore be improved by ICDDPT. The therapy particularly improved the long term prognosis of SLO negative cases and cases in clinical remission. It seems necessary to repeat this therapy for a long period to achieve satisfactory results. In SLO positive cases and cases without clinical remission, the therapy had only a limited effect. PMID:1744459

  3. Extended continuous infusion low-dose recombinant interleukin-2 in advanced cancer: prolonged immunomodulation without significant toxicity.

    PubMed

    Caligiuri, M A; Murray, C; Soiffer, R J; Klumpp, T R; Seiden, M; Cochran, K; Cameron, C; Ish, C; Buchanan, L; Perillo, D

    1991-12-01

    In previous clinical trials, recombinant interleukin-2 (rIL-2) has been infused at high doses over short periods of time to generate lymphokine-activated killer (LAK) cells in vivo. These trials have been limited by severe toxicities, and the immunologic effects of rIL-2 have been transient. The present study was designed to assess the toxicity and immunologic effects of prolonged administration of low doses of rIL-2. In this phase I study, patients with advanced cancer were scheduled to receive intravenous (IV) infusion of rIL-2 without interruption for 3 months in an outpatient setting. Twenty-one patients received rIL-2 at doses ranging from 0.5 x 10(5) to 6.0 x 10(5) U/m2/d. Treatment was extremely well tolerated, and no patient experienced grade 3 or grade 4 toxicity. The lowest dose level (0.5 x 10(5) U/m2/d) did not have demonstrable immunologic activity. At doses of 1.5 x 10(5) and 4.5 x 10(5) U/m2/d, rIL-2 infusion resulted in the specific expansion of natural-killer (NK) cells (sixfold and ninefold increases, respectively, at these two dose levels) without any changes in B cells, T cells, neutrophils, or monocytes. Grade 2 toxicity was observed at the dose of 6.0 x 10(5) U/m2/d, as three patients required interruption of therapy and two patients who completed therapy developed transient hypothyroidism. In patients with increased NK cells, enhancement of non-major histocompatibility complex (MHC)-restricted cytotoxicity and increased generation of LAK cells in vitro were also demonstrated. Therapy with low-dose rIL-2 can be given safely in an uninterrupted fashion for prolonged periods of time in an outpatient setting. This results in selective expansion of NK cells in vivo with minimal toxicity. Further investigation of this schedule for immunomodulation in vivo should be pursued in phase II studies of both malignant and immunodeficient disease states. PMID:1960552

  4. 25 CFR 170.616 - How are advance payments made when additional IRR Program funds are made available after...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... self-governance agreement? When additional IRR Program funds are available, following the procedures in 25 CFR 1000.104, tribes can request to use the additional funds for IRR Program activities or... funds are made available after execution of the self-governance agreement? 170.616 Section...

  5. 25 CFR 170.616 - How are advance payments made when additional IRR Program funds are made available after...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... self-governance agreement? When additional IRR Program funds are available, following the procedures in 25 CFR 1000.104, tribes can request to use the additional funds for IRR Program activities or... funds are made available after execution of the self-governance agreement? 170.616 Section...

  6. Optimization of Deep Drilling Performance - Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

    SciTech Connect

    Alan Black; Arnis Judzis

    2005-09-30

    This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2004 through September 2005. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all Phase 1 testing and is planning Phase 2 development.

  7. Testing earthquake prediction algorithms: Statistically significant advance prediction of the largest earthquakes in the Circum-Pacific, 1992-1997

    USGS Publications Warehouse

    Kossobokov, V.G.; Romashkova, L.L.; Keilis-Borok, V. I.; Healy, J.H.

    1999-01-01

    Algorithms M8 and MSc (i.e., the Mendocino Scenario) were used in a real-time intermediate-term research prediction of the strongest earthquakes in the Circum-Pacific seismic belt. Predictions are made by M8 first. Then, the areas of alarm are reduced by MSc at the cost that some earthquakes are missed in the second approximation of prediction. In 1992-1997, five earthquakes of magnitude 8 and above occurred in the test area: all of them were predicted by M8 and MSc identified correctly the locations of four of them. The space-time volume of the alarms is 36% and 18%, correspondingly, when estimated with a normalized product measure of empirical distribution of epicenters and uniform time. The statistical significance of the achieved results is beyond 99% both for M8 and MSc. For magnitude 7.5 + , 10 out of 19 earthquakes were predicted by M8 in 40% and five were predicted by M8-MSc in 13% of the total volume considered. This implies a significance level of 81% for M8 and 92% for M8-MSc. The lower significance levels might result from a global change in seismic regime in 1993-1996, when the rate of the largest events has doubled and all of them become exclusively normal or reversed faults. The predictions are fully reproducible; the algorithms M8 and MSc in complete formal definitions were published before we started our experiment [Keilis-Borok, V.I., Kossobokov, V.G., 1990. Premonitory activation of seismic flow: Algorithm M8, Phys. Earth and Planet. Inter. 61, 73-83; Kossobokov, V.G., Keilis-Borok, V.I., Smith, S.W., 1990. Localization of intermediate-term earthquake prediction, J. Geophys. Res., 95, 19763-19772; Healy, J.H., Kossobokov, V.G., Dewey, J.W., 1992. A test to evaluate the earthquake prediction algorithm, M8. U.S. Geol. Surv. OFR 92-401]. M8 is available from the IASPEI Software Library [Healy, J.H., Keilis-Borok, V.I., Lee, W.H.K. (Eds.), 1997. Algorithms for Earthquake Statistics and Prediction, Vol. 6. IASPEI Software Library]. ?? 1999 Elsevier

  8. Locoregionally Advanced Head and Neck Cancer Treated With Primary Radiotherapy: A Comparison of the Addition of Cetuximab or Chemotherapy and the Impact of Protocol Treatment

    SciTech Connect

    Caudell, Jimmy J.; Sawrie, Stephen M.; Spencer, Sharon A.; Desmond, Renee A.; Carroll, William R.; Peters, Glenn E.; Nabell, Lisle M.; Meredith, Ruby F.; Bonner, James A.

    2008-07-01

    Purpose: The addition of platinum-based chemotherapy (ChRT) or cetuximab (ExRT) to concurrent radiotherapy (RT) has resulted in improved survival in Phase III studies for locoregionally advanced head and neck cancer (LAHNC). However the optimal treatment regimen has not been defined. A retrospective study was performed to compare outcomes in patients who were treated definitively with ExRT or ChRT. Methods: Cetuximab with concurrent RT was used to treat 29 patients with LAHNC, all of whom had tumors of the oral cavity, oropharynx, or larynx. All patients were T2 to T4 and overall American Joint Committee on Cancer Stage III to IVB, with a Karnofsky Performance Status (KPS) score of 60 or greater. ChRT was used to treat 103 patients with similar characteristics. Patients were evaluated for locoregional control (LRC), distant metastasis-free survival (DMFS), disease-specific survival (DSS), and overall survival (OS). Median follow-up for patients alive at last contact was 83 months for those treated with ExRT and 53 months for those treated with ChRT. Cox proportional hazard models were used to assess independent prognostic factors. Results: The LRC, DMFS, and DSS were not significantly different, with 3-year rates of 70.7%, 92.4%, and 78.6% for ExRT and 74.7%, 86.6%, and 76.5% for ChRT, respectively. The OS was significantly different between the two groups (p = 0.02), with 3-year rates of 75.9% for ExRT and 61.3% for ChRT. OS was not significant when patients who were on protocol treatments of ExRT or ChRT were compared. Also, OS was not significant when multivariate analysis was used to control for potential confounding factors. Conclusion: In our single-institution retrospective review of patients treated with ExRT or ChRT, no significant differences were found in LRC, DMFS, DSS, or OS.

  9. MRI-Guided 3D Optimization Significantly Improves DVH Parameters of Pulsed-Dose-Rate Brachytherapy in Locally Advanced Cervical Cancer

    SciTech Connect

    Lindegaard, Jacob C. Tanderup, Kari; Nielsen, Soren Kynde; Haack, Soren; Gelineck, John

    2008-07-01

    Purpose: To compare dose-volume histogram parameters of standard Point A and magnetic resonance imaging-based three-dimensional optimized dose plans in 21 consecutive patients who underwent pulsed-dose-rate brachytherapy (PDR-BT) for locally advanced cervical cancer. Methods and Materials: All patients received external beam radiotherapy (elective target dose, 45 Gy in 25-30 fractions; tumor target dose, 50-60 Gy in 25-30 fractions). PDR-BT was applied with a tandem-ring applicator. Additional ring-guided titanium needles were used in 4 patients and a multichannel vaginal cylinder in 2 patients. Dose planning was done using 1.5 Tesla T{sub 1}-weighted and T{sub 2}-weighted paratransversal magnetic resonance imaging scans. T{sub 1}-weighted visible oil-containing tubes were used for applicator reconstruction. The prescribed standard dose for PDR-BT was 10 Gy (1 Gy/pulse, 1 pulse/h) for two to three fractions to reach a physical dose of 80 Gy to Point A. The total dose (external beam radiotherapy plus brachytherapy) was normalized to an equivalent dose in 2-Gy fractions using {alpha}/{beta} = 10 Gy for tumor, {alpha}/{beta} = 3 Gy for normal tissue, and a repair half-time of 1.5 h. The goal of optimization was dose received by 90% of the target volume (D{sub 90}) of {>=}85 Gy{sub {alpha}}{sub /{beta}}{sub 10} in the high-risk clinical target volume (cervix and remaining tumor at brachytherapy), but keeping the minimal dose to 2 cm{sup 3} of the bladder and rectum/sigmoid at <90 and <75 Gy{sub {alpha}}{sub /{beta}}{sub 3}, respectively. Results: Using three-dimensional optimization, all dose-volume histogram constraints were met in 16 of 21 patients compared with 3 of 21 patients with two-dimensional library plans (p < 0.001). Optimization increased the minimal target dose (D{sub 100}) of the high-risk clinical target volume (p < 0.007) and decreased the minimal dose to 2 cm{sup 3} for the sigmoid significantly (p = 0.03). For the high-risk clinical target volume, D

  10. Postweaning dietary genistein exposure advances puberty without significantly affecting early pregnancy in C57BL/6J female mice

    PubMed Central

    Li, Rong; Zhao, Fei; Diao, Honglu; Xiao, Shuo; Ye, Xiaoqin

    2014-01-01

    An epidemiological study indicates higher plasma level of genistein in girls with earlier puberty. This study tests the hypothesis in C57BL/6J mice that postweaning (peripubertal) dietary genistein exposure could result in earlier puberty in females assessed by vaginal opening, estrous cyclicity, corpus luteum and mammary gland development. Newly weaned female mice were fed with 0, 5, 100, or 500 ppm genistein diets. Decreased age at vaginal opening, increased length on estrus stage, and accelerated mammary gland development were detected in 100 and 500 ppm genistein-treated groups. Increased presence of corpus luteum was found in 5 ppm genistein-treated group at 6 weeks old only. Increased expression of epithelial-specific genes but not that of ERα and ERβ was detected in 500 ppm genistein-treated mammary glands at 5 weeks old. No significant adverse effect on embryo implantation was observed. These data demonstrate causal effect of dietary genistein on earlier puberty in female mice. PMID:24365114

  11. Addition of an N-terminal epitope tag significantly increases the activity of plant fatty acid desaturases expressed in yeast cells

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Saccharomyces cerevisiae shows great potential for development of bioreactor systems geared towards the production of high-value lipids such as polyunsaturated omega-3 fatty acids, the yields of which are largely dependent on the activity of ectopically-expressed enzymes. Here we show that the addit...

  12. Advances in Bank Erosion Modelling at a Catchment-Scale and Its Significance to the Sediment Budget

    NASA Astrophysics Data System (ADS)

    Holman, I.; Janes, V.; O'Donnell, G. M.; Birkinshaw, S.; Kilsby, C. G.

    2014-12-01

    Channel bank erosion has been shown to contribute significantly to catchment sediment budgets, yet representation of this process in catchment models is often overly simplistic, or non-existent. In this study, the physically-based hydrological SHETRAN model has been modified to improve representation of channel bank erosion processes by incorporation of the influences of vegetation and channel sinuosity. The presence of vegetation on channel banks increases bank stability, reducing erosion rates. Large flood events have the potential to remove bank vegetation resulting in a sudden increase of bank erodibility, which then decreases over time as vegetation re-establishes. Within the updated model, erodibility coefficients throughout the catchment are temporally variable and respond to high magnitude discharge events to represent vegetation removal. The influence of further flood events during the vegetation recovery period is enhanced due to the increased erodibility, enabling the model to represent memory within the catchment. Meteorological conditions after high magnitude events influence the length of recovery time, which is also incorporated within the model. Channel sinuosity and channel curvature show a non-linear relationship with bank erosion due to the positioning of high-velocity flow within channels. The influence of sinuosity has been incorporated within the model by spatial variation of minimum and maximum bank erodibility coefficients according to variation of sinuosity within represented channels. The developed model has been applied to the Eden catchment, Cumbria, UK. The model has been validated using observed long-term bank erosion data from a GIS overlay methodology, indicating bank erosion contributes up to 11% of the annual catchment sediment budget. This paper will detail both the new modelling approach and accuracy of its application.

  13. Phase stabilization of magnetite (Fe3O4) nanoparticles with B2O3 addition: A significant enhancement on the phase transition temperature

    NASA Astrophysics Data System (ADS)

    Topal, Uğur; Aksan, Mehmet Ali

    2016-05-01

    Magnetite nanoparticles (MNPs) are extensively investigated for biomedical applications, particularly as contrast agents for Magnetic Resonance Imaging and as drug delivery agent and heat mediators for cancer therapy. Tuning the magnetic properties of the magnetite nanoparticles with doping of foreign atoms has a crucial importance for determining the application areas of these materials and so attracts much interests. On the other hand the doping with foreign atoms requires high temperature annealing, and it causes a phase transition to the hematite phase above 400 °C. In this work the phase transition temperature from the magnetite to the hematite phase has been increased by 200 °C, which is the highest enhancement reported in literature. It was achieved by addition of the appropriate amounts of B2O3. Our experiments indicates that the 5.0 wt% of B2O3 addition stabilizes and keeps the existence of single phase magnetite up to 600 °C.

  14. Transfusion Efficacy of Apheresis Platelet Concentrates Irradiated at the Day of Transfusion Is Significantly Superior Compared to Platelets Irradiated in Advance

    PubMed Central

    Julmy, Friedgard; Ammann, Roland A.; Fontana, Stefano; Taleghani, Behrouz Mansouri; Hirt, Andreas; Leibundgut, Kurt

    2014-01-01

    Summary Background Gamma irradiation is currently the standard care to avoid transfusion-associated graft-versus-host disease. Guidelines on gamma irradiation of blood components state that platelets (PLTs) can be irradiated at any stage in their 5-day storage and can thereafter be stored up to their normal shelf life of 5 days after collection. In this study, we explored whether the timing of irradiation has an effect on transfusion efficacy of apheresis PLT concentrates (APCs). Methods Based on the 1-hour percent PLT recovery (PPR1h), transfusion efficacy of 1,000 eligible APCs transfused to 144 children were evaluated retrospectively. PPR1h was compared in transfused APCs irradiated at the day of transfusion and APCs irradiated in advance. Results In univariate analysis, transfusion efficacy of APCs irradiated in advance was significantly lower than that of APCs irradiated at the day of transfusion (mean PPR1h 27.7 vs. 35.0%; p = 0.007). This was confirmed in multivariate analysis (p = 0.030). Compared to non-irradiated APCs, transfusion efficacy of APCs irradiated at the day of transfusion was not significantly inferior (mean difference −2.8%; 95% CI −6.1 to 0.5%; p = 0.092), but APCs irradiated in advance were clearly less efficient (mean difference −8.1%; 95% CI −12.2 to −4.0%; p < 0.001). Conclusion Our data strongly support that APCs should not be irradiated in advance, 1.e., ≥24 h before transfusion. PMID:25053930

  15. Active-material additives for high-rate lead/acid batteries: have there been any positive advances?

    NASA Astrophysics Data System (ADS)

    McGregor, K.

    Low positive mass utilization poses a major problem for lead/acid batteries, particularly at high discharge rates, and is one of the major factors that limits the specific energy of the battery. The reasons for the incomplete discharge at high rates are generally ascribed to a combination of various polarization phenomena including: (i) poor acid transport from the bulk of the solution in the interior of the plate, and (ii) a continuous decrease in the conductivity of the plates due to formation of non-conductive PbSO 4. One approach to alleviating these problems is to improve the positive-plate porosity and/or conductivity by the incorporation of additives into the positive active-material. The purpose of this paper is to reew recent work with such additives, and to appraise their effectiveness towards raising battery performance.

  16. Significant Promotion Effect of Mo Additive on a Novel Ce-Zr Mixed Oxide Catalyst for the Selective Catalytic Reduction of NO(x) with NH3.

    PubMed

    Ding, Shipeng; Liu, Fudong; Shi, Xiaoyan; Liu, Kuo; Lian, Zhihua; Xie, Lijuan; He, Hong

    2015-05-13

    A novel Mo-promoted Ce-Zr mixed oxide catalyst prepared by a homogeneous precipitation method was used for the selective catalytic reduction (SCR) of NO(x) with NH3. The optimal catalyst showed high NH3-SCR activity, SO2/H2O durability, and thermal stability under test conditions. The addition of Mo inhibited growth of the CeO2 particle size, improved the redox ability, and increased the amount of surface acidity, especially the Lewis acidity, all of which were favorable for the excellent NH3-SCR performance. It is believed that the catalyst is promising for the removal of NO(x) from diesel engine exhaust. PMID:25894854

  17. A synopsis of the Defense Advanced Research Projects Agency (DARPA) investment in additive manufacture and what challenges remain

    NASA Astrophysics Data System (ADS)

    Maher, Michael; Smith, Adrien; Margiotta, Jesse

    2014-03-01

    DARPA's interest in additive manufacture dates back to the mid-80s with seedling programs that developed the foundational knowledge and equipment that led to the Solid Freeform Fabrication program in 1990. The drivers for this program included reducing development times by enabling "tool-less" manufacturing as well as integration of design and fabrication tools. DARPA consistently pushed the boundaries of additive manufacture with follow-on programs that expanded the material suite available for 3-D printing as well as new processes that expanded the technology's capability base. Programs such as the Mesoscopic Integrated Conformal Electronics (MICE) program incorporated functionality to the manufacturing processes through direct write of electronics. DARPA's investment in additive manufacture continues to this day but the focus has changed. DARPA's early investments were focused on developing and demonstrating the technology's capabilities. Now that the technology has been demonstrated, there is serious interest in taking advantage of the attributes unique to the processing methodology (such as customization and new design possibilities) for producing production parts. Accordingly, today's investment at DARPA addresses the systematic barriers to implementation rather than the technology itself. The Open Manufacturing program is enabling rapid qualification of new technologies for the manufacturing environment through the development of new modeling and informatics tools. While the technology is becoming more mainstream, there are plenty of challenges that need to be addressed. And as the technology continues to mature, the agency will continue to look for those "DARPA-hard" challenges that enable revolutionary changes in capability and performance for the Department of Defense.

  18. Addition of hydrogen peroxide for the simultaneous control of bromate and odor during advanced drinking water treatment using ozone.

    PubMed

    Wang, Yongjing; Yu, Jianwei; Zhang, Dong; Yang, Min

    2014-03-01

    Complete removal of the characteristic septic/swampy odor from Huangpu River source water could only be achieved under an ozone dose as high as 4.0 mg/L in an ozone-biological activated carbon (O3-BAC) process, which would lead to the production of high concentrations of carcinogenic bromate due to the high bromide content. This study investigated the possibility of simultaneous control of bromate and the septic/swampy odor by adding H2O2 prior to the O3-BAC process for the treatment of Huangpu River water. H2O2 addition could reduce the bromate concentration effectively at an H2O2/O3 (g/g) ratio of 0.5 or higher. At the same time, the septic/swampy odor removal was enhanced by the addition of H2O2, although optimization of the H2O2/O3 ratio was required for each ozone dose. At an ozone dose of 2.0 mg/L, the odor was removed completely at an H2O2/O3 ratio of 0.5. The results indicated that H2O2 application at a suitable dose could enhance the removal of the septic/swampy odor while suppressing the formation of bromate during ozonation of Huangpu River source water. PMID:25079267

  19. “I Don’t Want to Die Like That …”: The Impact of Significant Others’ Death Quality on Advance Care Planning

    PubMed Central

    Carr, Deborah

    2012-01-01

    Purpose of the Study: I examine whether 5 aspects of a significant other’s death quality (pain, decision-making capacity, location, problems with end-of life care, and preparation) affect whether one does advance care planning (ACP). I also identify specific aspects of others’ deaths that respondents say triggered their own planning. Design and Methods: Data are from the New Jersey End of Life study, a survey of 305 adults age 55+ seeking care at 2 major New Jersey medical centers. I estimate multivariate logistic regression models for a subsample of 253 participants who recently lost a loved one and provide descriptive findings from an open-ended question regarding the motivation for one’s ACP. Results: Multivariate analyses revealed “positive” role model effects; persons who witnessed significant others’ deaths that occurred at home, were free of problems associated with end-of-life care, and where advance directives were used are more likely to make end-of-life preparations. Open-ended data showed that 19% cited others’ deaths as the main trigger for their own planning, with most citing negative factors (pain, connection to machines, coma) that they hoped to avoid. Implications: Practitioners should encourage patients to use conversations about others’ deaths as springboards for discussions about one’s own end-of-life care, and to engage in ACP together with family. Implications for health care reform are highlighted. PMID:22547085

  20. Optimization of Deep Drilling Performance--Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

    SciTech Connect

    Alan Black; Arnis Judzis

    2003-10-01

    This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2002 through September 2002. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit--fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. Accomplishments to date include the following: 4Q 2002--Project started; Industry Team was assembled; Kick-off meeting was held at DOE Morgantown; 1Q 2003--Engineering meeting was held at Hughes Christensen, The Woodlands Texas to prepare preliminary plans for development and testing and review equipment needs; Operators started sending information regarding their needs for deep drilling challenges and priorities for large-scale testing experimental matrix; Aramco joined the Industry Team as DEA 148 objectives paralleled the DOE project; 2Q 2003--Engineering and planning for high pressure drilling at TerraTek commenced; 3Q 2003--Continuation of engineering and design work for high pressure drilling at TerraTek; Baker Hughes INTEQ drilling Fluids and Hughes Christensen commence planning for Phase 1 testing--recommendations for bits and fluids.

  1. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  2. An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration

    SciTech Connect

    TerraTek

    2007-06-30

    A deep drilling research program titled 'An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration' was conducted at TerraTek's Drilling and Completions Laboratory. Drilling tests were run to simulate deep drilling by using high bore pressures and high confining and overburden stresses. The purpose of this testing was to gain insight into practices that would improve rates of penetration and mechanical specific energy while drilling under high pressure conditions. Thirty-seven test series were run utilizing a variety of drilling parameters which allowed analysis of the performance of drill bits and drilling fluids. Five different drill bit types or styles were tested: four-bladed polycrystalline diamond compact (PDC), 7-bladed PDC in regular and long profile, roller-cone, and impregnated. There were three different rock types used to simulate deep formations: Mancos shale, Carthage marble, and Crab Orchard sandstone. The testing also analyzed various drilling fluids and the extent to which they improved drilling. The PDC drill bits provided the best performance overall. The impregnated and tungsten carbide insert roller-cone drill bits performed poorly under the conditions chosen. The cesium formate drilling fluid outperformed all other drilling muds when drilling in the Carthage marble and Mancos shale with PDC drill bits. The oil base drilling fluid with manganese tetroxide weighting material provided the best performance when drilling the Crab Orchard sandstone.

  3. Optical Measurement Technologies for High Temperature, Radiation Exposure, and Corrosive Environments—Significant Activities and Findings: In-vessel Optical Measurements for Advanced SMRs

    SciTech Connect

    Anheier, Norman C.; Cannon, Bret D.; Qiao, Hong; Suter, Jonathan D.

    2012-09-01

    Development of advanced Small Modular Reactors (aSMRs) is key to providing the United States with a sustainable, economically viable, and carbon-neutral energy source. The aSMR designs have attractive economic factors that should compensate for the economies of scale that have driven development of large commercial nuclear power plants to date. For example, aSMRs can be manufactured at reduced capital costs in a factory and potentially shorter lead times and then be shipped to a site to provide power away from large grid systems. The integral, self-contained nature of aSMR designs is fundamentally different than conventional reactor designs. Future aSMR deployment will require new instrumentation and control (I&C) architectures to accommodate the integral design and withstand the extreme in-vessel environmental conditions. Operators will depend on sophisticated sensing and machine vision technologies that provide efficient human-machine interface for in-vessel telepresence, telerobotic control, and remote process operations. The future viability of aSMRs is dependent on understanding and overcoming the significant technical challenges involving in-vessel reactor sensing and monitoring under extreme temperatures, pressures, corrosive environments, and radiation fluxes

  4. GxE interactions between FOXO genotypes and drinking tea are significantly associated with prevention of cognitive decline in advanced age in China.

    PubMed

    Zeng, Yi; Chen, Huashuai; Ni, Ting; Ruan, Rongping; Feng, Lei; Nie, Chao; Cheng, Lingguo; Li, Yang; Tao, Wei; Gu, Jun; Land, Kenneth C; Yashin, Anatoli; Tan, Qihua; Yang, Ze; Bolund, Lars; Yang, Huanming; Hauser, Elizabeth; Willcox, D Craig; Willcox, Bradley J; Tian, Xiao-Li; Vaupel, James W

    2015-04-01

    Logistic regression analysis based on data from 822 Han Chinese oldest old aged 92+ demonstrated that interactions between carrying FOXO1A-266 or FOXO3-310 or FOXO3-292 and tea drinking at around age 60 or at present time were significantly associated with lower risk of cognitive disability at advanced ages. Associations between tea drinking and reduced cognitive disability were much stronger among carriers of the genotypes of FOXO1A-266 or FOXO3-310 or FOXO3-292 compared with noncarriers, and it was reconfirmed by analysis of three-way interactions across FOXO genotypes, tea drinking at around age 60, and at present time. Based on prior findings from animal and human cell models, we postulate that intake of tea compounds may activate FOXO gene expression, which in turn may positively affect cognitive function in the oldest old population. Our empirical findings imply that the health benefits of particular nutritional interventions, including tea drinking, may, in part, depend upon individual genetic profiles. PMID:24895270

  5. Addition of cetuximab to oxaliplatin-based first-line combination chemotherapy for treatment of advanced colorectal cancer: results of the randomised phase 3 MRC COIN trial

    PubMed Central

    Maughan, Timothy S; Adams, Richard A; Smith, Christopher G; Meade, Angela M; Seymour, Matthew T; Wilson, Richard H; Idziaszczyk, Shelley; Harris, Rebecca; Fisher, David; Kenny, Sarah L; Kay, Edward; Mitchell, Jenna K; Madi, Ayman; Jasani, Bharat; James, Michelle D; Bridgewater, John; Kennedy, M John; Claes, Bart; Lambrechts, Diether; Kaplan, Richard; Cheadle, Jeremy P

    2011-01-01

    Summary Background In the Medical Research Council (MRC) COIN trial, the epidermal growth factor receptor (EGFR)-targeted antibody cetuximab was added to standard chemotherapy in first-line treatment of advanced colorectal cancer with the aim of assessing effect on overall survival. Methods In this randomised controlled trial, patients who were fit for but had not received previous chemotherapy for advanced colorectal cancer were randomly assigned to oxaliplatin and fluoropyrimidine chemotherapy (arm A), the same combination plus cetuximab (arm B), or intermittent chemotherapy (arm C). The choice of fluoropyrimidine therapy (capecitabine or infused fluouroracil plus leucovorin) was decided before randomisation. Randomisation was done centrally (via telephone) by the MRC Clinical Trials Unit using minimisation. Treatment allocation was not masked. The comparison of arms A and C is described in a companion paper. Here, we present the comparison of arm A and B, for which the primary outcome was overall survival in patients with KRAS wild-type tumours. Analysis was by intention to treat. Further analyses with respect to NRAS, BRAF, and EGFR status were done. The trial is registered, ISRCTN27286448. Findings 1630 patients were randomly assigned to treatment groups (815 to standard therapy and 815 to addition of cetuximab). Tumour samples from 1316 (81%) patients were used for somatic molecular analyses; 565 (43%) had KRAS mutations. In patients with KRAS wild-type tumours (arm A, n=367; arm B, n=362), overall survival did not differ between treatment groups (median survival 17·9 months [IQR 10·3–29·2] in the control group vs 17·0 months [9·4–30·1] in the cetuximab group; HR 1·04, 95% CI 0·87–1·23, p=0·67). Similarly, there was no effect on progression-free survival (8·6 months [IQR 5·0–12·5] in the control group vs 8·6 months [5·1–13·8] in the cetuximab group; HR 0·96, 0·82–1·12, p=0·60). Overall response rate increased from 57% (n=209

  6. Addition of Everolimus Post VEGFR Inhibition Treatment Failure in Advanced Sarcoma Patients Who Previously Benefited from VEGFR Inhibition: A Case Series

    PubMed Central

    Hays, John L.; Chen, James L.

    2016-01-01

    Background Patients with metastatic sarcoma who progress on vascular endothelial growth factor receptor inhibitors (VEGFRi) have limited treatment options. Upregulation of the mTOR pathway has been demonstrated to be a means of resistance to targeted VEGFRi in metastatic sarcoma. Patients and methods Retrospective cohort study to evaluate the clinical benefit at four months of combining mTOR inhibition (mTORi) via everolimus with VEGFRi in patients who have derived benefit from single-agent VEGFRi but have progressed. Patients with recurrent, metastatic soft tissue or bone sarcomas who progressed after deriving clinical benefit to VEGFRi beyond 12 weeks were continued on VEGFRi with the addition of everolimus (5 mg daily). Progression free survival was measured from start of VEGFRi to disease progression on single agent VEGFRi as well as from the addition of everolimus therapy to disease progression or drug discontinuation due to toxicity. Clinical benefit was defined as stable disease or partial response at 4 months. Results Nine patients were evaluated. Two patients did not tolerate therapy due to GI toxicity and one elected to discontinue therapy. Of the remaining six patients, the clinical benefit rate at four months was 50%. Progression free survival (PFS) for these patients was 3.1 months ranging from 0.5 to 7.2 months with one patient remaining on combination therapy. Conclusion In this heavily pre-treated, advanced sarcoma population, the addition of mTOR inhibition to VEGFRi based therapy resulted in a clinical benefit for a subset of patients. Prospective studies will be needed to verify these results. PMID:27295141

  7. Expression and Significance of High-Mobility Group Protein B1 (HMGB1) and the Receptor for Advanced Glycation End-Product (RAGE) in Knee Osteoarthritis

    PubMed Central

    Sun, Xue-Hui; Liu, Ying; Han, Yun; Wang, Jian

    2016-01-01

    Background This study was performed with the aim to explore the expression of high-mobility group protein B1 (HMGB1) and the receptor for advanced glycation end-product (RAGE) in knee osteoarthritis (KOA) and its clinical significance. Material/Methods A total of 108 synovial tissues selected from KOA patients were included in the experimental group. Seventy-five synovial tissues of knee joints, selected from patients who were clinically and pathologically confirmed without joint lesion, were included in the control group. The mRNA and protein expressions of HMGB1 and RAGE were determined by using RT-PCR and immunohistochemistry, respectively. Western blotting was used for measuring relative protein expression. An ROC curve was drawn to evaluate the diagnostic value of HMGB1 and RAGE for KOA. Results The positive cell number and positive expression intensity of HMGB1 and RAGE in synovial tissue was higher in the experimental group than in the control group. PI for HMGB1 and RAGE expression in KOA patients was positively correlated with clinical classification of X-ray films (P<0.05). HMGB1 and RAGE mRNA expressions, as well as relative protein expression of HMGB1 and RAGE in synovial tissue, were higher in the experimental group than in the control group (all P<0.05). The sensitivity of HMGB1 protein, RAGE protein, HMGB1 mRNA, and RAGE mRNA were 76.9%, 64.8%, 86.1%, and 64.8%, respectively; and the specificity was 100%, 96%, 74.7%, and 80%, respectively. Conclusions The protein and mRNA expressions of HMGB1 and RAGE are both increased in KOA patients, suggesting that they are involved in KOA. PMID:27320800

  8. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial

    PubMed Central

    Rule, Simon; Smith, Paul; Johnson, Peter W.M.; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F.; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-01-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network. PMID:26611473

  9. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial.

    PubMed

    Rule, Simon; Smith, Paul; Johnson, Peter W M; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-02-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network. PMID:26611473

  10. SWOG S0800 (NCI CDR0000636131): addition of bevacizumab to neoadjuvant nab-paclitaxel with dose-dense doxorubicin and cyclophosphamide improves pathologic complete response (pCR) rates in inflammatory or locally advanced breast cancer.

    PubMed

    Nahleh, Z A; Barlow, W E; Hayes, D F; Schott, A F; Gralow, J R; Sikov, W M; Perez, E A; Chennuru, S; Mirshahidi, H R; Corso, S W; Lew, D L; Pusztai, L; Livingston, R B; Hortobagyi, G N

    2016-08-01

    SWOG S0800, a randomized open-label Phase II clinical trial, compared the combination of weekly nab-paclitaxel and bevacizumab followed by dose-dense doxorubicin and cyclophosphamide (AC) with nab-paclitaxel followed or preceded by AC as neoadjuvant treatment for HER2-negative locally advanced breast cancer (LABC) or inflammatory breast cancer (IBC). Patients were randomly allocated (2:1:1) to three neoadjuvant chemotherapy arms: (1) nab-paclitaxel with concurrent bevacizumab followed by AC; (2) nab-paclitaxel followed by AC; or (3) AC followed by nab-paclitaxel. The primary endpoint was pathologic complete response (pCR) with stratification by disease type (non-IBC LABC vs. IBC) and hormone receptor status (positive vs. negative). Overall survival (OS), event-free survival (EFS), and toxicity were secondary endpoints. Analyses were intent-to-treat comparing bevacizumab to the combined control arms. A total of 215 patients were accrued including 11 % with IBC and 32 % with triple-negative breast cancer (TNBC). The addition of bevacizumab significantly increased the pCR rate overall (36 vs. 21 %; p = 0.019) and in TNBC (59 vs. 29 %; p = 0.014), but not in hormone receptor-positive disease (24 vs. 18 %; p = 0.41). Sequence of administration of nab-paclitaxel and AC did not affect the pCR rate. While no significant differences in OS or EFS were seen, a trend favored the addition of bevacizumab for EFS (p = 0.06) in TNBC. Overall, Grade 3-4 adverse events did not differ substantially by treatment arm. The addition of bevacizumab to nab-paclitaxel prior to dose-dense AC neoadjuvant chemotherapy significantly improved the pCR rate compared to chemotherapy alone in patients with triple-negative LABC/IBC and was accompanied by a trend for improved EFS. This suggests reconsideration of the role of bevacizumab in high-risk triple-negative locally advanced breast cancer. PMID:27393622

  11. Significant improvement of the recombinant Borrelia-specific immunoglobulin G immunoblot test by addition of VlsE and a DbpA homologue derived from Borrelia garinii for diagnosis of early neuroborreliosis.

    PubMed

    Schulte-Spechtel, Ulrike; Lehnert, Gisela; Liegl, Gaby; Fingerle, Volker; Heimerl, Christiane; Johnson, Barbara J B; Wilske, Bettina

    2003-03-01

    We investigated whether the recombinant Borrelia Western blot test previously described (B. Wilske, C. Habermann, V. Fingerle, B. Hillenbrand, S. Jauris-Heipke, G. Lehnert, I. Pradel, D. Rössler, and U. Schulte-Spechtel, Med. Microbiol. Immunol. 188:139-144, 1999) can be improved by the addition of VlsE and additional DbpA and OspC homologues. By using a panel of sera from 36 neuroborreliosis patients and 67 control patients, the diagnostic sensitivity of the recombinant immunoblot test was significantly increased (86.1% versus 52.7%) without loss of specificity and was higher (86.1% versus 63.8%) than that of the conventional whole-cell lysate immunoblot test (U. Hauser, G. Lehnert, R. Lobentanzer, and B. Wilske, J. Clin. Microbiol. 35:1433-1444, 1997). Improvement was mainly due to the presence of VlsE and DbpA. PMID:12624072

  12. Solving the Big Data (BD) Problem in Advanced Manufacturing (Subcategory for work done at Georgia Tech. Study Process and Design Factors for Additive Manufacturing Improvement)

    SciTech Connect

    Clark, Brett W.; Diaz, Kimberly A.; Ochiobi, Chinaza Darlene; Paynabar, Kamran

    2015-09-01

    3D printing originally known as additive manufacturing is a process of making 3 dimensional solid objects from a CAD file. This ground breaking technology is widely used for industrial and biomedical purposes such as building objects, tools, body parts and cosmetics. An important benefit of 3D printing is the cost reduction and manufacturing flexibility; complex parts are built at the fraction of the price. However, layer by layer printing of complex shapes adds error due to the surface roughness. Any such error results in poor quality products with inaccurate dimensions. The main purpose of this research is to measure the amount of printing errors for parts with different geometric shapes and to analyze them for finding optimal printing settings to minimize the error. We use a Design of Experiments framework, and focus on studying parts with cone and ellipsoid shapes. We found that the orientation and the shape of geometric shapes have significant effect on the printing error. From our analysis, we also determined the optimal orientation that gives the least printing error.

  13. In vivo imaging of advanced glycation end products (AGEs) of albumin: first observations of significantly reduced clearance and liver deposition properties in mice.

    PubMed

    Tsutsui, Ayumi; Ogura, Akihiro; Tahara, Tsuyoshi; Nozaki, Satoshi; Urano, Sayaka; Hara, Mitsuko; Kojima, Soichi; Kurbangalieva, Almira; Onoe, Hirotaka; Watanabe, Yasuyoshi; Taniguchi, Naoyuki; Tanaka, Katsunori

    2016-06-15

    Advanced glycation end products (AGEs) are associated with various diseases, especially during aging and the development of diabetes and uremia. To better understand these biological processes, investigation of the in vivo kinetics of AGEs, i.e., analysis of trafficking and clearance properties, was carried out by molecular imaging. Following the preparation of Cy7.5-labeled AGE-albumin and intravenous injection in BALB/cA-nu/nu mice, noninvasive fluorescence kinetics analysis was performed. In vivo imaging and fluorescence microscopy analysis revealed that non-enzymatic AGEs were smoothly captured by scavenger cells in the liver, i.e., Kupffer and other sinusoidal cells, but were unable to be properly cleared from the body. Overall, these results highlight an important link between AGEs and various disorders associated with them, which may serve as a platform for future research to better understand the processes and mechanisms of these disorders. PMID:26932508

  14. Phase II Study of the Addition of Bevacizumab to Standard Chemoradiation for Loco-regionally Advanced Nasopharyngeal Carcinoma: Radiation Therapy Oncology Group (RTOG) Trial 0615

    PubMed Central

    Lee, Nancy Y.; Zhang, Ed; Pfister, David. G.; Kim, John; Garden, Adam. S.; Mechalakos, James; Hu, Kenneth; Le, Quynh T.; Colevas, A. Dimitrios; Glisson, Bonnie S.; Chan, Anthony T.C.; Ang, K. Kian

    2016-01-01

    Purpose We sought to improve the outcomes for loco-regionally advanced nasopharyngeal carcinoma (NPC) by testing the feasibility/safety of adding bevacizumab to chemoradiation. Patients/Methods Eligible patients with ≥T2b and/or positive node(s) were prescribed 3 cycles of bevacizumab (15 mg/kg) and cisplatin (100 mg/m2) both given on days 1, 22, and 43 of radiation (70 Gy) using IMRT delivered over 33 days on a daily basis, Monday through Friday. This is followed by 3 cycles of bevacizumab (15 mg/kg), cisplatin (80 mg/m2) both were given on days 64, 85, and 106 and fluorouracil (1000 mg/m2/d) on days 64–67, 85–88, 106–109 after radiation. The primary endpoint was to evaluate the safety of the addition of bevacizumab to chemoradiation, specifically looking at treatment-related Grade 4 hemorrhage and/or any Grade 5 adverse event in the first year. Toxicity during and after treatment were collected along with tumor control endpoints. The analysis was done per protocol. This protocol has completed its target accrual. Results There were a total of 46 patients enrolled in this study of whom 44 patients were eligible for analysis. No grade 3–4 hemorrhage or grade 5 adverse events were observed; 9 patients (20.5%) experienced grade 1–2 hemorrhage. Grade 4 adverse events were experienced by the following numbers of patients: leukopenia NOS – 6; lymphopenia – 5; neutrophil count – 5; pharyngolaryngeal pain – 2; hemoglobin – 1; infection with grade 3–4 neutrophils (blood) – 1; infection with grade 3–4 neutrophils [skin (cellulitis)] – 1; tinnitus – 1; thrombosis – 1; radiation mucositis – 1. The most common grade 3 adverse events were radiation mucositis – 33; dysphagia – 25; and mucositis/stomatitis (clinical exam) (pharynx) – 15. Two patients experienced late grade 3 xerostomia. Other late grade 3 adverse events were: dysphagia – 5; hearing impaired – 3; neuralgia NOS – 2; constitutional symptoms (other) – 1; dehydration

  15. Recent advances in the understanding and care of familial hypercholesterolaemia: significance of the biology and therapeutic regulation of proprotein convertase subtilisin/kexin type 9.

    PubMed

    Page, Michael M; Stefanutti, Claudia; Sniderman, Allan; Watts, Gerald F

    2015-07-01

    Familial hypercholesterolaemia (FH) is an autosomal co-dominant disorder that markedly raises plasma low-density lipoprotein-cholesterol (LDL-C) concentration, causing premature atherosclerotic coronary artery disease (CAD). FH has recently come under intense focus and, although there is general consensus in recent international guidelines regarding diagnosis and treatment, there is debate about the value of genetic studies. Genetic testing can be cost-effective as part of cascade screening in dedicated centres, but the full mutation spectrum responsible for FH has not been established in many populations, and its use in primary care is not at present logistically feasible. Whether using genetic testing or not, cholesterol screening of family members of index patients with an abnormally raised LDL-C must be used to determine the need for early treatment to prevent the development of CAD. The metabolic defects in FH extend beyond LDL, and may affect triacylglycerol-rich and high-density lipoproteins, lipoprotein(a) and oxidative stress. Achievement of the recommended targets for LDL-C with current treatments is difficult, but this may be resolved by new drug therapies. Lipoprotein apheresis remains an effective treatment for severe FH and, although expensive, it costs less than the two recently introduced orphan drugs (lomitapide and mipomersen) for homozygous FH. Recent advances in understanding of the biology of proprotein convertase subtilisin/kexin type 9 (PCSK9) have further elucidated the regulation of lipoprotein metabolism and led to new drugs for effectively treating hypercholesterolaemia in FH and related conditions, as well as for treating many patients with statin intolerance. The mechanisms of action of PCSK9 inhibitors on lipoprotein metabolism and atherosclerosis, as well as their impact on cardiovascular outcomes and cost-effectiveness, remain to be established. PMID:25881720

  16. Prognostic Significance of 2-Deoxy-2-[18F]-Fluoro-D-Glucose PET/CT in Patients With Locally Advanced Esophageal Cancer Undergoing Neoadjuvant Chemoradiotherapy Before Surgery

    PubMed Central

    Giorgetti, Assuero; Pallabazzer, Giovanni; Ripoli, Andrea; Solito, Biagio; Genovesi, Dario; Lencioni, Monica; Fabrini, Maria Grazia; D’Imporzano, Simone; Pieraccini, Laura; Marzullo, Paolo; Santi, Stefano

    2016-01-01

    Abstract To investigate the prognostic value of tumor metabolism measurements on serial 2-deoxy-2-[18F]fluoro-D-glucose positron emission tomography and computed tomography scans in patients with locally advanced esophageal cancer undergoing neoadjuvant chemoradiotherapy. Forty-five patients (63 ± 7 years, 6 female) treated with concomitant chemoradiotherapy before surgery were followed up for 24 ± 18 months (range 4–71). Positron emission tomography and computed tomography scans were obtained within 1 week before the start (PET1) and 1 month after the completion of the treatment (PET2). Total body tumor metabolic activity was measured as the sum of the parameters: SUVmax, SUV corrected for lean body mass, and total lesion glycolysis (TLG40/50/70%). Then, delta values for the parameters between PET1 and PET2 were calculated and expressed as percentage of PET1 results. At the time of the analysis, 27 patients were dead and 18 were alive. There was no difference between the 2 groups in terms of age, sex, site of the disease, histology, and the presence/absence of linfonodal metastases (P = NS). Survival random forest analysis (20,000 trees) resulted in an estimate of error rate of 36%. The nonparametric approach identified ΔTLG40 as the most predictive factor of survival (relative importance 100%). Moreover, T (17%), N (5%), and M (5%) stage of the disease, cancer histology (11%), TLG70 (5%) at the end of chemioradioterapy, and ΔTLG50–70 (17%–5%) were positively associated with patient outcome. The nonparametric analysis confirmed the prognostic importance of some clinical parameters, such as TNM stage and cancer histology. Moreover, ΔTLG resulted to be the most important factor in predicting outcome and should be considered in risk stratification of patients treated with neoadjuvant chemoradiotherapy. PMID:27043676

  17. DEVELOPMENT OF A NOVEL RADIATIVELY/CONDUCTIVELY STABILIZED BURNER FOR SIGNIFICANT REDUCTION OF NOx EMISSIONS AND FOR ADVANCING THE MODELING AND UNDERSTANDING OF PULVERIZED COAL COMBUSTION AND EMISSIONS

    SciTech Connect

    Noam Lior; Stuart W. Churchill

    2003-10-01

    The primary objective of the proposed study was the study and analysis of, and design recommendations for, a novel radiatively-conductively stabilized combustion (RCSC) process for pulverized coal, which, based on our prior studies with both fluid fuels and pulverized coal, holds a high promise to reduce NO{sub x} production significantly. We have primarily engaged in continuing and improving our process modeling and analysis, obtained a large amount of quantitative information about the effects of the major parameters on NO{sub x} production, conducted an extensive exergy analysis of the process, evaluated the practicalities of employing the Radiatively-Conductively Stabilized Combustor (RCSC) to large power and heat plants, and improved the experimental facility. Prior experimental work has proven the feasibility of the combustor, but slagging during coal combustion was observed and should be dealt with. The primary outcomes and conclusions from the study are: (1) we developed a model and computer program that represents the pulverized coal combustion in the RCSC, (2) the model predicts that NO{sub x} emissions can be reduced by a number of methods, detailed in the report. (3) the exergy analysis points out at least a couple of possible ways to improve the exergetic efficiency in this combustor: increasing the effectiveness of thermal feedback, and adjusting the combustor mixture exit location, (4) because of the low coal flow rates necessitated in this study to obtain complete combustion in the burner, the size of a burner operating under the considered conditions would have to be up to an order of magnitude, larger than comparable commercial burners, but different flow configurations of the RCSC can yield higher feed rates and smaller dimensions, and should be investigated. Related to this contract, eleven papers were published in journals and conference proceedings, and ten invited presentations were given at university and research institutions, as well as at

  18. Prognostic significance of p16 in locoregionally advanced head and neck cancer treated with concurrent 5-fluorouracil, hydroxyurea, cetuximab and intensity-modulated radiation therapy.

    PubMed

    Tong, Charles C L; Lau, K H Vincent; Rivera, Michael; Cannan, David; Aguirre-Ghiso, Julio; Sikora, Andrew G; Gupta, Vishal; Forsythe, Kevin; Ko, Eric C; Misiukiewicz, Krzysztof; Gurudutt, Vivek; Teng, Marita S; Packer, Stuart H; Genden, Eric M; Kao, Johnny

    2012-05-01

    A phase II trial was conducted to evaluate the tolerability and efficacy of incorporating cetuximab and simultaneous integrated boost intensity-modulated radiation therapy (SIB-IMRT) into a well-described 5-fluorouracil (5-FU) and hydroxyurea (HU)-based chemoradiation regimen. Patients with stage IVa-IVb or high-risk stage III squamous cell carcinomas were enrolled. Prior organ-conserving surgery or induction chemotherapy was allowed. IMRT was administered in 1.5 Gy fractions twice daily on days 1-5 of weeks 1, 3, 5, 7±9 for a total dose of 60-73.5 Gy. Concurrent systemic therapy consisted of 5-FU (600 mg/m2), HU (500 mg BID) and cetuximab (250 mg/m2). p16INK4A expression was assessed by immunohistochemistry. From January 2007 to January 2010, 65 patients (61 with stage IV disease; 31 with oropharyngeal primaries) were enrolled. At a median follow-up of 28 months, 2-year locoregional control, distant control, progression-free survival, event-free survival and overall survival were 79, 83, 72, 63 and 80%, respectively. In 48 patients with available pre-treatment tissue, p16 overexpression was associated with significantly increased distant control (p=0.03), progression-free survival (p=0.02), event-free survival (p=0.007) and overall survival (p=0.03). The most common grade 3-4 toxicities were mucositis (46%), leukopenia (18%), anemia (18%) and dermatitis (17%). Concurrent 5-FU, HU, cetuximab and SIB-IMRT is a highly active regimen, particularly in patients with p16-positive disease. PMID:22322320

  19. Significant Treasures.

    ERIC Educational Resources Information Center

    Andrews, Ian A.

    1999-01-01

    Provides a crossword puzzle with an answer key corresponding to the book entitled "Significant Treasures/Tresors Parlants" that is filled with color and black-and-white prints of paintings and artifacts from 131 museums and art galleries as a sampling of the 2,200 such Canadian institutions. (CMK)

  20. Effect of yttrium additions on the elevated-temperature tensile properties and hardness of an advanced iron-nickel-chromium LMFBR cladding and duct alloy

    SciTech Connect

    Song, M.H.

    1981-10-01

    The effect of the addition of yttrium on the elevated temperature tensile properties and hardness of an Fe-34% Ni-12% Cr candidate LMFBR cladding and duct alloy was investigated. Tensile tests were performed from room temperature to 800/sup 0/C in 100/sup 0/C steps at strain rates of 2.2 x 10/sup -3/ and 2.2 x 10/sup -4/ sec/sup -1/. Hardness tests were performed from room temperature to 850/sup 0/C in 50/sup 0/C steps. The addition of 0.1% yttrium decreased the yield stress and ultimate tensile stress in the test temperature range employed. Hardness also decreased over this test temperature range. In tensile tests, dynamic strain aging behavior occurred both for the undoped and doped alloy in the temperature range from 200 to 600/sup 0/C and 300 to 600/sup 0/C for the lower and higher strain rate, respectively.

  1. Food additives

    MedlinePlus

    Food additives are substances that become part of a food product when they are added during the processing or making of that food. "Direct" food additives are often added during processing to: Add nutrients ...

  2. Advances in Significance Testing for Cluster Detection

    NASA Astrophysics Data System (ADS)

    Coleman, Deidra Andrea

    Over the past two decades, much attention has been given to data driven project goals such as the Human Genome Project and the development of syndromic surveillance systems. A major component of these types of projects is analyzing the abundance of data. Detecting clusters within the data can be beneficial as it can lead to the identification of specified sequences of DNA nucleotides that are related to important biological functions or the locations of epidemics such as disease outbreaks or bioterrorism attacks. Cluster detection techniques require efficient and accurate hypothesis testing procedures. In this dissertation, we improve upon the hypothesis testing procedures for cluster detection by enhancing distributional theory and providing an alternative method for spatial cluster detection using syndromic surveillance data. In Chapter 2, we provide an efficient method to compute the exact distribution of the number and coverage of h-clumps of a collection of words. This method involves defining a Markov chain using a minimal deterministic automaton to reduce the number of states needed for computation. We allow words of the collection to contain other words of the collection making the method more general. We use our method to compute the distributions of the number and coverage of h-clumps in the Chi motif of H. influenza.. In Chapter 3, we provide an efficient algorithm to compute the exact distribution of multiple window discrete scan statistics for higher-order, multi-state Markovian sequences. This algorithm involves defining a Markov chain to efficiently keep track of probabilities needed to compute p-values of the statistic. We use our algorithm to identify cases where the available approximation does not perform well. We also use our algorithm to detect unusual clusters of made free throw shots by National Basketball Association players during the 2009-2010 regular season. In Chapter 4, we give a procedure to detect outbreaks using syndromic surveillance data while controlling the Bayesian False Discovery Rate (BFDR). The procedure entails choosing an appropriate Bayesian model that captures the spatial dependency inherent in epidemiological data and considers all days of interest, selecting a test statistic based on a chosen measure that provides the magnitude of the maximumal spatial cluster for each day, and identifying a cutoff value that controls the BFDR for rejecting the collective null hypothesis of no outbreak over a collection of days for a specified region.We use our procedure to analyze botulism-like syndrome data collected by the North Carolina Disease Event Tracking and Epidemiologic Collection Tool (NC DETECT).

  3. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  4. Radiological, physical, and chemical characterization of additional alpha contaminated and mixed low-level waste for treatment at the advanced mixed waste treatment project

    SciTech Connect

    Hutchinson, D.P.

    1995-07-01

    This document provides physical, chemical, and radiological descriptive information for a portion of mixed waste that is potentially available for private sector treatment. The format and contents are designed to provide treatment vendors with preliminary information on the characteristics and properties for additional candidate portions of the Idaho National Engineering Laboratory (INEL) and offsite mixed wastes not covered in the two previous characterization reports for the INEL-stored low-level alpha-contaminated and transuranic wastes. This report defines the waste, provides background information, briefly reviews the requirements of the Federal Facility Compliance Act (P.L. 102-386), and relates the Site Treatment Plans developed under the Federal Facility Compliance Act to the waste streams described herein. Each waste is summarized in a Waste Profile Sheet with text, charts, and tables of waste descriptive information for a particular waste stream. A discussion of the availability and uncertainty of data for these waste streams precedes the characterization descriptions.

  5. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  6. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  7. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  8. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  9. Phosphazene additives

    SciTech Connect

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  10. "Old" tail lobes provide significant additional substorm power

    NASA Astrophysics Data System (ADS)

    Mishin, V.; Mishin, V. V.; Karavaev, Y.

    2012-12-01

    In each polar cap (PC) we mark out "old PC" observed during quiet time before the event under consideration, and "new PC" that emerges during rounding the old one and expanding the PC total area. Old and new PCs correspond in the magnetosphere to the old and new tail lobes, respectively. The new lobe variable magnetic flux Ψ1 is usually assumed to be active, i.e. it provides transport of the electromagnetic energy flux (Poynting flux) ɛ' from solar wind into the magnetosphere. The old lobe magnetic flux Ψ2 is usually supposed to be passive, i.e. it remains constant during the disturbance and does not participate in the transporting process which would mean the old PC electric field absolute screening from the convection electric field created by the magnetopause reconnection. In fact, screening is observed, but it is far from absolute. We suggest a model of screening and determine its quantitative characteristics in the selected superstorm. The coefficient of a screening is the β = Ψ2/Ψ02, where Ψ02 = const is open magnetic flux through the old PC measured prior to the substorm, and Ψ2 is variable magnetic flux during the substorm. We consider three various regimes of disturbance. In each, the coefficient β decreased during the loading phase and increased at the unloading phase, but the rates and amplitudes of variations exhibited a strong dependence on the regime. We interpreted decrease in β as a result of involving the old PC magnetic flux Ψ2, which was considered to be constant earlier, to the ' transport process of the Poynting flux from the solar wind into the magnetosphere. A weakening of the transport process at the subsequent unloading phase creates increase in β. Estimates showed that coefficient β during each regime and the computed Poynting flux varied manifolds. In general, unlike the existing substorm conception, the new scenario describes an unknown earlier tail lobe activation process during a substorm growth phase that effectively increases the accumulated tail energy for the expansion and recovery phases.

  11. Somatic Copy Number Abnormalities and Mutations in PI3K/AKT/mTOR Pathway Have Prognostic Significance for Overall Survival in Platinum Treated Locally Advanced or Metastatic Urothelial Tumors

    PubMed Central

    Bellmunt, Joaquim; Werner, Lillian; Leow, Jeffrey J.; Mullane, Stephanie A.; Fay, André P.; Riester, Markus; Van Hummelen, Paul; Taplin, Mary-Ellen; Choueiri, Toni K.; Van Allen, Eliezer; Rosenberg, Jonathan

    2015-01-01

    Background An integrative analysis was conducted to identify genomic alterations at a pathway level that could predict overall survival (OS) in patients with advanced urothelial carcinoma (UC) treated with platinum-based chemotherapy. Patients and Methods DNA and RNA were extracted from 103 formalin-fixed paraffin embedded (FFPE) invasive high-grade UC samples and were screened for mutations, copy number variation (CNV) and gene expression analysis. Clinical data were available from 85 cases. Mutations were analyzed by mass-spectrometry based on genotyping platform (Oncomap 3) and genomic imbalances were detected by comparative genomic hybridization (CGH) analysis. Regions with threshold of log2 ratio ≥0.4, or ≤0.6 were defined as either having copy number gain or loss and significantly recurrent CNV across the set of samples were determined using a GISTIC analysis. Expression analysis on selected relevant UC genes was conducted using Nanostring. To define the co-occurrence pattern of mutations and CNV, we grouped genomic events into 5 core signal transduction pathways: 1) TP53 pathway, 2) RTK/RAS/RAF pathway, 3) PI3K/AKT/mTOR pathway, 4) WNT/CTNNB1, 5) RB1 pathway. Cox regression was used to assess pathways abnormalities with survival outcomes. Results 35 samples (41%) harbored mutations on at least one gene: TP53 (16%), PIK3CA (9%), FGFR3 (2%), HRAS/KRAS (5%), and CTNNB1 (1%). 66% of patients had some sort of CNV. PIK3CA/AKT/mTOR pathway alteration (mutations+CNV) had the greatest impact on OS (p=0.055). At a gene level, overexpression of CTNNB1 (p=0.0008) and PIK3CA (p=0.02) were associated with shorter OS. Mutational status on PIK3CA was not associated with survival. Among other individually found genomic alterations, TP53 mutations (p=0.07), mTOR gain (p=0.07) and PTEN overexpression (p=0.08) have a marginally significant negative impact on OS. Conclusions Our study suggests that targeted therapies focusing on the PIK3CA/AKT/mTOR pathway genomic

  12. A Phase II Study of Additional Four-Week Chemotherapy With Capecitabine During the Resting Periods After Six-Week Neoadjuvant Chemoradiotherapy in Patients With Locally Advanced Rectal Cancer

    PubMed Central

    Lee, Kyung Ha; Song, Min Sang; Park, Jun Boem; Kim, Jin Soo; Kang, Dae Young

    2013-01-01

    Purpose The aim of this study is to evaluate the efficacy and the safety of additional 4-week chemotherapy with capecitabine during the resting periods after a 6-week neoadjuvant chemoradiotherapy (NCRT) in patients with locally advanced rectal cancer. Methods Radiotherapy was delivered to the whole pelvis at a total dose of 50.4 Gy for 6 weeks. Oral capecitabine was administered at a dose of 825 mg/m2 twice daily for 10 weeks. Surgery was performed 2-4 weeks following the completion of chemotherapy. Results Between January 2010 and September 2011, 44 patients were enrolled. Forty-three patients underwent surgery, and 41 patients completed the scheduled treatment. Pathologic complete remission (pCR) was noted in 9 patients (20.9%). T down-staging and N down-staging were observed in 32 patients (74.4%) and 33 patients (76.7%), respectively. Grade 3 to 5 toxicity was noted in 5 patients (11.4%). The pCR rate was similar with the pCR rates obtained after conventional NCRT at our institute and at other institutes. Conclusion This study showed that additional 4-week chemotherapy with capecitabine during the resting periods after 6-week NCRT was safe, but it was no more effective than conventional NCRT. PMID:24278857

  13. Advance directives

    PubMed Central

    O’Sullivan, Rory; Mailo, Kevin; Angeles, Ricardo; Agarwal, Gina

    2015-01-01

    Abstract Objective To establish the prevalence of patients with advance directives in a family practice, and to describe patients’ perspectives on a family doctor’s role in initiating discussions about advance directives. Design A self-administered patient questionnaire. Setting A busy urban family medicine teaching clinic in Hamilton, Ont. Participants A convenience sample of adult patients attending the clinic over the course of a typical business week. Main outcome measures The prevalence of advance directives in the patient population was determined, and the patients’ expectations regarding the role of their family doctors were elucidated. Results The survey population consisted of 800 participants (a response rate of 72.5%) well distributed across age groups; 19.7% had written advance directives and 43.8% had previously discussed the topic of advance directives, but only 4.3% of these discussions had occurred with family doctors. In 5.7% of cases, a family physician had raised the issue; 72.3% of respondents believed patients should initiate the discussion. Patients who considered advance directives extremely important were significantly more likely to want their family doctors to start the conversation (odds ratio 3.98; P < .05). Conclusion Advance directives were not routinely addressed in the family practice. Most patients preferred to initiate the discussion of advance directives. However, patients who considered the subject extremely important wanted their family doctors to initiate the discussion. PMID:25873704

  14. Technological Advancements

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2010-01-01

    The influx of technology has brought significant improvements to school facilities. Many of those advancements can be found in classrooms, but when students head down the hall to use the washrooms, they are likely to find a host of technological innovations that have improved conditions in that part of the building. This article describes modern…

  15. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  16. Significant Tsunami Events

    NASA Astrophysics Data System (ADS)

    Dunbar, P. K.; Furtney, M.; McLean, S. J.; Sweeney, A. D.

    2014-12-01

    Tsunamis have inflicted death and destruction on the coastlines of the world throughout history. The occurrence of tsunamis and the resulting effects have been collected and studied as far back as the second millennium B.C. The knowledge gained from cataloging and examining these events has led to significant changes in our understanding of tsunamis, tsunami sources, and methods to mitigate the effects of tsunamis. The most significant, not surprisingly, are often the most devastating, such as the 2011 Tohoku, Japan earthquake and tsunami. The goal of this poster is to give a brief overview of the occurrence of tsunamis and then focus specifically on several significant tsunamis. There are various criteria to determine the most significant tsunamis: the number of deaths, amount of damage, maximum runup height, had a major impact on tsunami science or policy, etc. As a result, descriptions will include some of the most costly (2011 Tohoku, Japan), the most deadly (2004 Sumatra, 1883 Krakatau), and the highest runup ever observed (1958 Lituya Bay, Alaska). The discovery of the Cascadia subduction zone as the source of the 1700 Japanese "Orphan" tsunami and a future tsunami threat to the U.S. northwest coast, contributed to the decision to form the U.S. National Tsunami Hazard Mitigation Program. The great Lisbon earthquake of 1755 marked the beginning of the modern era of seismology. Knowledge gained from the 1964 Alaska earthquake and tsunami helped confirm the theory of plate tectonics. The 1946 Alaska, 1952 Kuril Islands, 1960 Chile, 1964 Alaska, and the 2004 Banda Aceh, tsunamis all resulted in warning centers or systems being established.The data descriptions on this poster were extracted from NOAA's National Geophysical Data Center (NGDC) global historical tsunami database. Additional information about these tsunamis, as well as water level data can be found by accessing the NGDC website www.ngdc.noaa.gov/hazard/

  17. A Significant Statistical Advancement on the Predictive Values of ERCC1 Polymorphisms for Clinical Outcomes of Platinum-Based Chemotherapy in Non-Small Cell Lung Cancer: An Updated Meta-Analysis

    PubMed Central

    Han, Yali; Liu, Jie; Sun, Meili; Zhang, Zongpu; Liu, Chuanyong; Sun, Yuping

    2016-01-01

    Background. There is no definitive conclusion so far on the predictive values of ERCC1 polymorphisms for clinical outcomes of platinum-based chemotherapy in non-small cell lung cancer (NSCLC). We updated this meta-analysis with an expectation to obtain some statistical advancement on this issue. Methods. Relevant studies were identified by searching MEDLINE, EMBASE databases from inception to April 2015. Primary outcomes included objective response rate (ORR), progression-free survival (PFS), and overall survival (OS). All analyses were performed using the Review Manager version 5.3 and the Stata version 12.0. Results. A total of 33 studies including 5373 patients were identified. ERCC1 C118T and C8092A could predict both ORR and OS for platinum-based chemotherapy in Asian NSCLC patients (CT + TT versus CC, ORR: OR = 0.80, 95% CI = 0.67–0.94; OS: HR = 1.24, 95% CI = 1.01–1.53) (CA + AA versus CC, ORR: OR = 0.76, 95% CI = 0.60–0.96; OS: HR = 1.37, 95% CI = 1.06–1.75). Conclusions. Current evidence strongly indicated the prospect of ERCC1 C118T and C8092A as predictive biomarkers for platinum-based chemotherapy in Asian NSCLC patients. However, the results should be interpreted with caution and large prospective studies are still required to further investigate these findings. PMID:27057082

  18. Advanced cryogenic tank development status

    NASA Astrophysics Data System (ADS)

    Braun, G. F.; Tack, W. T.; Scholz, E. F.

    1993-06-01

    Significant advances have been made in the development of materials, structures, and manufacturing technologies for the next generation of cryogenic propellant tanks under the auspices of a joint U.S. Air Force/NASA sponsored advanced development program. This paper summarizes the achievements of this three-year program, particularly in the evolution and properties of Weldalite 049, net shape component technology, Al-Li welding technology, and efficient manufacturing concepts. Results of a recent mechanical property characterization of a full-scale integrally stiffened barrel panel extrusion are presented, as well as plans for an additional weld process optimization program using response surface design of experiment techniques. A further discussion is given to the status of hardware completed for the Advanced Manufacturing Development Center and Martin Marietta's commitment to the integration of these technologies into the production of low-cost, light-weight cryogenic propellant tanks.

  19. Prognostic Significance of 2-Deoxy-2-[18F]-Fluoro-D-Glucose PET/CT in Patients With Locally Advanced Esophageal Cancer Undergoing Neoadjuvant Chemoradiotherapy Before Surgery: A Nonparametric Approach.

    PubMed

    Giorgetti, Assuero; Pallabazzer, Giovanni; Ripoli, Andrea; Solito, Biagio; Genovesi, Dario; Lencioni, Monica; Fabrini, Maria Grazia; D'Imporzano, Simone; Pieraccini, Laura; Marzullo, Paolo; Santi, Stefano

    2016-03-01

    To investigate the prognostic value of tumor metabolism measurements on serial 2-deoxy-2-[18F]fluoro-D-glucose positron emission tomography and computed tomography scans in patients with locally advanced esophageal cancer undergoing neoadjuvant chemoradiotherapy. Forty-five patients (63 ± 7 years, 6 female) treated with concomitant chemoradiotherapy before surgery were followed up for 24 ± 18 months (range 4-71). Positron emission tomography and computed tomography scans were obtained within 1 week before the start (PET1) and 1 month after the completion of the treatment (PET2). Total body tumor metabolic activity was measured as the sum of the parameters: SUVmax, SUV corrected for lean body mass, and total lesion glycolysis (TLG40/50/70%). Then, delta values for the parameters between PET1 and PET2 were calculated and expressed as percentage of PET1 results. At the time of the analysis, 27 patients were dead and 18 were alive. There was no difference between the 2 groups in terms of age, sex, site of the disease, histology, and the presence/absence of linfonodal metastases (P = NS). Survival random forest analysis (20,000 trees) resulted in an estimate of error rate of 36%. The nonparametric approach identified ΔTLG40 as the most predictive factor of survival (relative importance 100%). Moreover, T (17%), N (5%), and M (5%) stage of the disease, cancer histology (11%), TLG70 (5%) at the end of chemioradioterapy, and ΔTLG(50-70) (17%-5%) were positively associated with patient outcome. The nonparametric analysis confirmed the prognostic importance of some clinical parameters, such as TNM stage and cancer histology. Moreover, ΔTLG resulted to be the most important factor in predicting outcome and should be considered in risk stratification of patients treated with neoadjuvant chemoradiotherapy. PMID:27043676

  20. Advanced materials: Information and analysis needs

    SciTech Connect

    Curlee, T.R.; Das, S.; Lee, R.; Trumble, D.

    1990-09-01

    This report presents the findings of a study to identify the types of information and analysis that are needed for advanced materials. The project was sponsored by the US Bureau of Mines (BOM). It includes a conceptual description of information needs for advanced materials and the development and implementation of a questionnaire on the same subject. This report identifies twelve fundamental differences between advanced and traditional materials and discusses the implications of these differences for data and analysis needs. Advanced and traditional materials differ significantly in terms of physical and chemical properties. Advanced material properties can be customized more easily. The production of advanced materials may differ from traditional materials in terms of inputs, the importance of by-products, the importance of different processing steps (especially fabrication), and scale economies. The potential for change in advanced materials characteristics and markets is greater and is derived from the marriage of radically different materials and processes. In addition to the conceptual study, a questionnaire was developed and implemented to assess the opinions of people who are likely users of BOM information on advanced materials. The results of the questionnaire, which was sent to about 1000 people, generally confirm the propositions set forth in the conceptual part of the study. The results also provide data on the categories of advanced materials and the types of information that are of greatest interest to potential users. 32 refs., 1 fig., 12 tabs.

  1. Advanced night vision goggles

    NASA Astrophysics Data System (ADS)

    Thacker, Clinton

    2003-02-01

    The Advanced Night Vision Goggle (ANVG) program is developing integrated wide field of view (WFOV) helmet-mounted image intensifier night vision goggle systems. ANVG will provide a FOV of approximately 40° (vertical) × 100° (horizontal) and an integrated heads-up display for overlay of flight symbology and/or FLIR imagery. The added FLIR complements the I2 imagery in out of the window or ground applications. ANVG will significantly improve safety, situational awareness, and mission capabilities in differing environments. ANVG achieves the ultra wide FOV using four image intensifier tubes in a head-mounted configuration. Additional features include a miniature flat panel display and a lightweight uncooled FLIR. The integrated design will demonstrate the capability of helmet-mounted I2 and FLIR image fusion. Fusion will be accomplished optically and will offer significant opportunities for ground applications. This paper summarizes the basic technologies, lessons learned, and program status.

  2. Fuel and Additive Characterization for HCCI Combustion

    SciTech Connect

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-02-12

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included.

  3. Prognostic Significance of Carbohydrate Antigen 19-9 in Unresectable Locally Advanced Pancreatic Cancer Treated With Dose-Escalated Intensity Modulated Radiation Therapy and Concurrent Full-Dose Gemcitabine: Analysis of a Prospective Phase 1/2 Dose Escalation Study

    SciTech Connect

    Vainshtein, Jeffrey M.; Schipper, Matthew; Zalupski, Mark M.; Lawrence, Theodore S.; Abrams, Ross; Francis, Isaac R.; Khan, Gazala; Leslie, William; Ben-Josef, Edgar

    2013-05-01

    Purpose: Although established in the postresection setting, the prognostic value of carbohydrate antigen 19-9 (CA19-9) in unresectable locally advanced pancreatic cancer (LAPC) is less clear. We examined the prognostic utility of CA19-9 in patients with unresectable LAPC treated on a prospective trial of intensity modulated radiation therapy (IMRT) dose escalation with concurrent gemcitabine. Methods and Materials: Forty-six patients with unresectable LAPC were treated at the University of Michigan on a phase 1/2 trial of IMRT dose escalation with concurrent gemcitabine. CA19-9 was obtained at baseline and during routine follow-up. Cox models were used to assess the effect of baseline factors on freedom from local progression (FFLP), distant progression (FFDP), progression-free survival (PFS), and overall survival (OS). Stepwise forward regression was used to build multivariate predictive models for each endpoint. Results: Thirty-eight patients were eligible for the present analysis. On univariate analysis, baseline CA19-9 and age predicted OS, CA19-9 at baseline and 3 months predicted PFS, gross tumor volume (GTV) and black race predicted FFLP, and CA19-9 at 3 months predicted FFDP. On stepwise multivariate regression modeling, baseline CA19-9, age, and female sex predicted OS; baseline CA19-9 and female sex predicted both PFS and FFDP; and GTV predicted FFLP. Patients with baseline CA19-9 ≤90 U/mL had improved OS (median 23.0 vs 11.1 months, HR 2.88, P<.01) and PFS (14.4 vs 7.0 months, HR 3.61, P=.001). CA19-9 progression over 90 U/mL was prognostic for both OS (HR 3.65, P=.001) and PFS (HR 3.04, P=.001), and it was a stronger predictor of death than either local progression (HR 1.46, P=.42) or distant progression (HR 3.31, P=.004). Conclusions: In patients with unresectable LAPC undergoing definitive chemoradiation therapy, baseline CA19-9 was independently prognostic even after established prognostic factors were controlled for, whereas CA19-9 progression

  4. Addition of Rice Bran Arabinoxylan to Curcumin Therapy May Be of Benefit to Patients With Early-Stage B-Cell Lymphoid Malignancies (Monoclonal Gammopathy of Undetermined Significance, Smoldering Multiple Myeloma, or Stage 0/1 Chronic Lymphocytic Leukemia): A Preliminary Clinical Study.

    PubMed

    Golombick, Terry; Diamond, Terrence H; Manoharan, Arumugam; Ramakrishna, Rajeev

    2016-06-01

    Hypothesis Prior studies on patients with early B-cell lymphoid malignancies suggest that early intervention with curcumin may lead to delay in progressive disease and prolonged survival. These patients are characterized by increased susceptibility to infections. Rice bran arabinoxylan (Ribraxx) has been shown to have immunostimulatory, anti-inflammatory, and proapoptotic effects. We postulated that addition of Ribraxx to curcumin therapy may be of benefit. Study design Monoclonal gammopathy of undetermined significance (MGUS)/smoldering multiple myeloma (SMM) or stage 0/1 chronic lymphocytic leukemia (CLL) patients who had been on oral curcumin therapy for a period of 6 months or more were administered both curcumin (as Curcuforte) and Ribraxx. Methods Ten MGUS/SMM patients and 10 patients with stage 0/1 CLL were administered 6 g of curcumin and 2 g Ribraxx daily. Blood samples were collected at baseline and at 2-month intervals for a period of 6 months, and various markers were monitored. MGUS/SMM patients included full blood count (FBC); paraprotein; free light chains/ratio; C-reactive protein (CRP)and erythrocyte sedimentation rate (ESR); B2 microglobulin and immunological markers. Markers monitored for stage 0/1 CLL were FBC, CRP and ESR, and immunological markers. Results Of 10 MGUS/SMM patients,5 (50%) were neutropenic at baseline, and the Curcuforte/Ribraxx combination therapy showed an increased neutrophil count, varying between 10% and 90% among 8 of the 10 (80%) MGUS/SMM patients. An additional benefit of the combination therapy was the potent effect in reducing the raised ESR in 4 (44%) of the MGUS/SMM patients. Conclusion Addition of Ribraxx to curcumin therapy may be of benefit to patients with early-stage B-cell lymphoid malignancies. PMID:27154182

  5. Economic analysis of a phase III clinical trial evaluating the addition of total androgen suppression to radiation versus radiation alone for locally advanced prostate cancer (Radiation Therapy Oncology Group protocol 86-10)

    SciTech Connect

    Konski, Andre . E-mail: a_konski@fccc.edu; Sherman, Eric; Krahn, Murray; Bremner, Karen; Beck, J. Robert; Watkins-Bruner, Deborah; Pilepich, Michael

    2005-11-01

    Purpose: To evaluate the cost-effectiveness of adding hormone therapy to radiation for patients with locally advanced prostate cancer, using a Monte Carlo simulation of a Markov Model. Methods and Materials: Radiation Therapy Oncology Group (RTOG) protocol 86-10 randomized patients to receive radiation therapy (RT) alone or RT plus total androgen suppression (RTHormones) 2 months before and during RT for the treatment of locally advanced prostate cancer. A Markov model was designed with Data Pro (TreeAge Software, Williamstown, MA). The analysis took a payer's perspective. Transition probabilities from one state of health (i.e., with no disease progression or with hormone-responsive metastatic disease) to another were calculated from published rates pertaining to RTOG 86-10. Patients remained in one state of health for 1 year. Utility values for each health state and treatment were obtained from the literature. Distributions were sampled at random from the treatment utilities according to a second-order Monte Carlo simulation technique. Results: The mean expected cost for the RT-only treatments was $29,240 (range, $29,138-$29,403). The mean effectiveness for the RT-only treatment was 5.48 quality-adjusted life years (QALYs) (range, 5.47-5.50). The mean expected cost for RTHormones was $31,286 (range, $31,058-$31,555). The mean effectiveness was 6.43 QALYs (range, 6.42-6.44). Incremental cost-effectiveness analysis showed RTHormones to be within the range of cost-effectiveness at $2,153/QALY. Cost-effectiveness acceptability curve analysis resulted in a >80% probability that RTHormones is cost-effective. Conclusions: Our analysis shows that adding hormonal treatment to RT improves health outcomes at a cost that is within the acceptable cost-effectiveness range.

  6. Advanced Manufacturing Technologies

    NASA Technical Reports Server (NTRS)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  7. Where boosted significances come from

    NASA Astrophysics Data System (ADS)

    Plehn, Tilman; Schichtel, Peter; Wiegand, Daniel

    2014-03-01

    In an era of increasingly advanced experimental analysis techniques it is crucial to understand which phase space regions contribute a signal extraction from backgrounds. Based on the Neyman-Pearson lemma we compute the maximum significance for a signal extraction as an integral over phase space regions. We then study to what degree boosted Higgs strategies benefit ZH and tt¯H searches and which transverse momenta of the Higgs are most promising. We find that Higgs and top taggers are the appropriate tools, but would profit from a targeted optimization towards smaller transverse momenta. MadMax is available as an add-on to MadGraph 5.

  8. Advanced LIGO

    NASA Astrophysics Data System (ADS)

    LIGO Scientific Collaboration; Aasi, J.; Abbott, B. P.; Abbott, R.; Abbott, T.; Abernathy, M. R.; Ackley, K.; Adams, C.; Adams, T.; Addesso, P.; Adhikari, R. X.; Adya, V.; Affeldt, C.; Aggarwal, N.; Aguiar, O. D.; Ain, A.; Ajith, P.; Alemic, A.; Allen, B.; Amariutei, D.; Anderson, S. B.; Anderson, W. G.; Arai, K.; Araya, M. C.; Arceneaux, C.; Areeda, J. S.; Ashton, G.; Ast, S.; Aston, S. M.; Aufmuth, P.; Aulbert, C.; Aylott, B. E.; Babak, S.; Baker, P. T.; Ballmer, S. W.; Barayoga, J. C.; Barbet, M.; Barclay, S.; Barish, B. C.; Barker, D.; Barr, B.; Barsotti, L.; Bartlett, J.; Barton, M. A.; Bartos, I.; Bassiri, R.; Batch, J. C.; Baune, C.; Behnke, B.; Bell, A. S.; Bell, C.; Benacquista, M.; Bergman, J.; Bergmann, G.; Berry, C. P. L.; Betzwieser, J.; Bhagwat, S.; Bhandare, R.; Bilenko, I. A.; Billingsley, G.; Birch, J.; Biscans, S.; Biwer, C.; Blackburn, J. K.; Blackburn, L.; Blair, C. D.; Blair, D.; Bock, O.; Bodiya, T. P.; Bojtos, P.; Bond, C.; Bork, R.; Born, M.; Bose, Sukanta; Brady, P. R.; Braginsky, V. B.; Brau, J. E.; Bridges, D. O.; Brinkmann, M.; Brooks, A. F.; Brown, D. A.; Brown, D. D.; Brown, N. M.; Buchman, S.; Buikema, A.; Buonanno, A.; Cadonati, L.; Calderón Bustillo, J.; Camp, J. B.; Cannon, K. C.; Cao, J.; Capano, C. D.; Caride, S.; Caudill, S.; Cavaglià, M.; Cepeda, C.; Chakraborty, R.; Chalermsongsak, T.; Chamberlin, S. J.; Chao, S.; Charlton, P.; Chen, Y.; Cho, H. S.; Cho, M.; Chow, J. H.; Christensen, N.; Chu, Q.; Chung, S.; Ciani, G.; Clara, F.; Clark, J. A.; Collette, C.; Cominsky, L.; Constancio, M., Jr.; Cook, D.; Corbitt, T. R.; Cornish, N.; Corsi, A.; Costa, C. A.; Coughlin, M. W.; Countryman, S.; Couvares, P.; Coward, D. M.; Cowart, M. J.; Coyne, D. C.; Coyne, R.; Craig, K.; Creighton, J. D. E.; Creighton, T. D.; Cripe, J.; Crowder, S. G.; Cumming, A.; Cunningham, L.; Cutler, C.; Dahl, K.; Dal Canton, T.; Damjanic, M.; Danilishin, S. L.; Danzmann, K.; Dartez, L.; Dave, I.; Daveloza, H.; Davies, G. S.; Daw, E. J.; DeBra, D.; Del Pozzo, W.; Denker, T.; Dent, T.; Dergachev, V.; DeRosa, R. T.; DeSalvo, R.; Dhurandhar, S.; D´ıaz, M.; Di Palma, I.; Dojcinoski, G.; Dominguez, E.; Donovan, F.; Dooley, K. L.; Doravari, S.; Douglas, R.; Downes, T. P.; Driggers, J. C.; Du, Z.; Dwyer, S.; Eberle, T.; Edo, T.; Edwards, M.; Edwards, M.; Effler, A.; Eggenstein, H.-B.; Ehrens, P.; Eichholz, J.; Eikenberry, S. S.; Essick, R.; Etzel, T.; Evans, M.; Evans, T.; Factourovich, M.; Fairhurst, S.; Fan, X.; Fang, Q.; Farr, B.; Farr, W. M.; Favata, M.; Fays, M.; Fehrmann, H.; Fejer, M. M.; Feldbaum, D.; Ferreira, E. C.; Fisher, R. P.; Frei, Z.; Freise, A.; Frey, R.; Fricke, T. T.; Fritschel, P.; Frolov, V. V.; Fuentes-Tapia, S.; Fulda, P.; Fyffe, M.; Gair, J. R.; Gaonkar, S.; Gehrels, N.; Gergely, L. Á.; Giaime, J. A.; Giardina, K. D.; Gleason, J.; Goetz, E.; Goetz, R.; Gondan, L.; González, G.; Gordon, N.; Gorodetsky, M. L.; Gossan, S.; Goßler, S.; Gräf, C.; Graff, P. B.; Grant, A.; Gras, S.; Gray, C.; Greenhalgh, R. J. S.; Gretarsson, A. M.; Grote, H.; Grunewald, S.; Guido, C. J.; Guo, X.; Gushwa, K.; Gustafson, E. K.; Gustafson, R.; Hacker, J.; Hall, E. D.; Hammond, G.; Hanke, M.; Hanks, J.; Hanna, C.; Hannam, M. D.; Hanson, J.; Hardwick, T.; Harry, G. M.; Harry, I. W.; Hart, M.; Hartman, M. T.; Haster, C.-J.; Haughian, K.; Hee, S.; Heintze, M.; Heinzel, G.; Hendry, M.; Heng, I. S.; Heptonstall, A. W.; Heurs, M.; Hewitson, M.; Hild, S.; Hoak, D.; Hodge, K. A.; Hollitt, S. E.; Holt, K.; Hopkins, P.; Hosken, D. J.; Hough, J.; Houston, E.; Howell, E. J.; Hu, Y. M.; Huerta, E.; Hughey, B.; Husa, S.; Huttner, S. H.; Huynh, M.; Huynh-Dinh, T.; Idrisy, A.; Indik, N.; Ingram, D. R.; Inta, R.; Islas, G.; Isler, J. C.; Isogai, T.; Iyer, B. R.; Izumi, K.; Jacobson, M.; Jang, H.; Jawahar, S.; Ji, Y.; Jiménez-Forteza, F.; Johnson, W. W.; Jones, D. I.; Jones, R.; Ju, L.; Haris, K.; Kalogera, V.; Kandhasamy, S.; Kang, G.; Kanner, J. B.; Katsavounidis, E.; Katzman, W.; Kaufer, H.; Kaufer, S.; Kaur, T.; Kawabe, K.; Kawazoe, F.; Keiser, G. M.; Keitel, D.; Kelley, D. B.; Kells, W.; Keppel, D. G.; Key, J. S.; Khalaidovski, A.; Khalili, F. Y.; Khazanov, E. A.; Kim, C.; Kim, K.; Kim, N. G.; Kim, N.; Kim, Y.-M.; King, E. J.; King, P. J.; Kinzel, D. L.; Kissel, J. S.; Klimenko, S.; Kline, J.; Koehlenbeck, S.; Kokeyama, K.; Kondrashov, V.; Korobko, M.; Korth, W. Z.; Kozak, D. B.; Kringel, V.; Krishnan, B.; Krueger, C.; Kuehn, G.; Kumar, A.; Kumar, P.; Kuo, L.; Landry, M.; Lantz, B.; Larson, S.; Lasky, P. D.; Lazzarini, A.; Lazzaro, C.; Le, J.; Leaci, P.; Leavey, S.; Lebigot, E. O.; Lee, C. H.; Lee, H. K.; Lee, H. M.; Leong, J. R.; Levin, Y.; Levine, B.; Lewis, J.; Li, T. G. F.; Libbrecht, K.; Libson, A.; Lin, A. C.; Littenberg, T. B.; Lockerbie, N. A.; Lockett, V.; Logue, J.; Lombardi, A. L.; Lormand, M.; Lough, J.; Lubinski, M. J.; Lück, H.; Lundgren, A. P.; Lynch, R.; Ma, Y.; Macarthur, J.; MacDonald, T.; Machenschalk, B.; MacInnis, M.; Macleod, D. M.; Magaña-Sandoval, F.; Magee, R.; Mageswaran, M.; Maglione, C.; Mailand, K.; Mandel, I.; Mandic, V.; Mangano, V.; Mansell, G. L.; Márka, S.; Márka, Z.; Markosyan, A.; Maros, E.; Martin, I. W.; Martin, R. M.; Martynov, D.; Marx, J. N.; Mason, K.; Massinger, T. J.; Matichard, F.; Matone, L.; Mavalvala, N.; Mazumder, N.; Mazzolo, G.; McCarthy, R.; McClelland, D. E.; McCormick, S.; McGuire, S. C.; McIntyre, G.; McIver, J.; McLin, K.; McWilliams, S.; Meadors, G. D.; Meinders, M.; Melatos, A.; Mendell, G.; Mercer, R. A.; Meshkov, S.; Messenger, C.; Meyers, P. M.; Miao, H.; Middleton, H.; Mikhailov, E. E.; Miller, A.; Miller, J.; Millhouse, M.; Ming, J.; Mirshekari, S.; Mishra, C.; Mitra, S.; Mitrofanov, V. P.; Mitselmakher, G.; Mittleman, R.; Moe, B.; Mohanty, S. D.; Mohapatra, S. R. P.; Moore, B.; Moraru, D.; Moreno, G.; Morriss, S. R.; Mossavi, K.; Mow-Lowry, C. M.; Mueller, C. L.; Mueller, G.; Mukherjee, S.; Mullavey, A.; Munch, J.; Murphy, D.; Murray, P. G.; Mytidis, A.; Nash, T.; Nayak, R. K.; Necula, V.; Nedkova, K.; Newton, G.; Nguyen, T.; Nielsen, A. B.; Nissanke, S.; Nitz, A. H.; Nolting, D.; Normandin, M. E. N.; Nuttall, L. K.; Ochsner, E.; O'Dell, J.; Oelker, E.; Ogin, G. H.; Oh, J. J.; Oh, S. H.; Ohme, F.; Oppermann, P.; Oram, R.; O'Reilly, B.; Ortega, W.; O'Shaughnessy, R.; Osthelder, C.; Ott, C. D.; Ottaway, D. J.; Ottens, R. S.; Overmier, H.; Owen, B. J.; Padilla, C.; Pai, A.; Pai, S.; Palashov, O.; Pal-Singh, A.; Pan, H.; Pankow, C.; Pannarale, F.; Pant, B. C.; Papa, M. A.; Paris, H.; Patrick, Z.; Pedraza, M.; Pekowsky, L.; Pele, A.; Penn, S.; Perreca, A.; Phelps, M.; Pierro, V.; Pinto, I. M.; Pitkin, M.; Poeld, J.; Post, A.; Poteomkin, A.; Powell, J.; Prasad, J.; Predoi, V.; Premachandra, S.; Prestegard, T.; Price, L. R.; Principe, M.; Privitera, S.; Prix, R.; Prokhorov, L.; Puncken, O.; Pürrer, M.; Qin, J.; Quetschke, V.; Quintero, E.; Quiroga, G.; Quitzow-James, R.; Raab, F. J.; Rabeling, D. S.; Radkins, H.; Raffai, P.; Raja, S.; Rajalakshmi, G.; Rakhmanov, M.; Ramirez, K.; Raymond, V.; Reed, C. M.; Reid, S.; Reitze, D. H.; Reula, O.; Riles, K.; Robertson, N. A.; Robie, R.; Rollins, J. G.; Roma, V.; Romano, J. D.; Romanov, G.; Romie, J. H.; Rowan, S.; Rüdiger, A.; Ryan, K.; Sachdev, S.; Sadecki, T.; Sadeghian, L.; Saleem, M.; Salemi, F.; Sammut, L.; Sandberg, V.; Sanders, J. R.; Sannibale, V.; Santiago-Prieto, I.; Sathyaprakash, B. S.; Saulson, P. R.; Savage, R.; Sawadsky, A.; Scheuer, J.; Schilling, R.; Schmidt, P.; Schnabel, R.; Schofield, R. M. S.; Schreiber, E.; Schuette, D.; Schutz, B. F.; Scott, J.; Scott, S. M.; Sellers, D.; Sengupta, A. S.; Sergeev, A.; Serna, G.; Sevigny, A.; Shaddock, D. A.; Shahriar, M. S.; Shaltev, M.; Shao, Z.; Shapiro, B.; Shawhan, P.; Shoemaker, D. H.; Sidery, T. L.; Siemens, X.; Sigg, D.; Silva, A. D.; Simakov, D.; Singer, A.; Singer, L.; Singh, R.; Sintes, A. M.; Slagmolen, B. J. J.; Smith, J. R.; Smith, M. R.; Smith, R. J. E.; Smith-Lefebvre, N. D.; Son, E. J.; Sorazu, B.; Souradeep, T.; Staley, A.; Stebbins, J.; Steinke, M.; Steinlechner, J.; Steinlechner, S.; Steinmeyer, D.; Stephens, B. C.; Steplewski, S.; Stevenson, S.; Stone, R.; Strain, K. A.; Strigin, S.; Sturani, R.; Stuver, A. L.; Summerscales, T. Z.; Sutton, P. J.; Szczepanczyk, M.; Szeifert, G.; Talukder, D.; Tanner, D. B.; Tápai, M.; Tarabrin, S. P.; Taracchini, A.; Taylor, R.; Tellez, G.; Theeg, T.; Thirugnanasambandam, M. P.; Thomas, M.; Thomas, P.; Thorne, K. A.; Thorne, K. S.; Thrane, E.; Tiwari, V.; Tomlinson, C.; Torres, C. V.; Torrie, C. I.; Traylor, G.; Tse, M.; Tshilumba, D.; Ugolini, D.; Unnikrishnan, C. S.; Urban, A. L.; Usman, S. A.; Vahlbruch, H.; Vajente, G.; Valdes, G.; Vallisneri, M.; van Veggel, A. A.; Vass, S.; Vaulin, R.; Vecchio, A.; Veitch, J.; Veitch, P. J.; Venkateswara, K.; Vincent-Finley, R.; Vitale, S.; Vo, T.; Vorvick, C.; Vousden, W. D.; Vyatchanin, S. P.; Wade, A. R.; Wade, L.; Wade, M.; Walker, M.; Wallace, L.; Walsh, S.; Wang, H.; Wang, M.; Wang, X.; Ward, R. L.; Warner, J.; Was, M.; Weaver, B.; Weinert, M.; Weinstein, A. J.; Weiss, R.; Welborn, T.; Wen, L.; Wessels, P.; Westphal, T.; Wette, K.; Whelan, J. T.; Whitcomb, S. E.; White, D. J.; Whiting, B. F.; Wilkinson, C.; Williams, L.; Williams, R.; Williamson, A. R.; Willis, J. L.; Willke, B.; Wimmer, M.; Winkler, W.; Wipf, C. C.; Wittel, H.; Woan, G.; Worden, J.; Xie, S.; Yablon, J.; Yakushin, I.; Yam, W.; Yamamoto, H.; Yancey, C. C.; Yang, Q.; Zanolin, M.; Zhang, Fan; Zhang, L.; Zhang, M.; Zhang, Y.; Zhao, C.; Zhou, M.; Zhu, X. J.; Zucker, M. E.; Zuraw, S.; Zweizig, J.

    2015-04-01

    The Advanced LIGO gravitational wave detectors are second-generation instruments designed and built for the two LIGO observatories in Hanford, WA and Livingston, LA, USA. The two instruments are identical in design, and are specialized versions of a Michelson interferometer with 4 km long arms. As in Initial LIGO, Fabry-Perot cavities are used in the arms to increase the interaction time with a gravitational wave, and power recycling is used to increase the effective laser power. Signal recycling has been added in Advanced LIGO to improve the frequency response. In the most sensitive frequency region around 100 Hz, the design strain sensitivity is a factor of 10 better than Initial LIGO. In addition, the low frequency end of the sensitivity band is moved from 40 Hz down to 10 Hz. All interferometer components have been replaced with improved technologies to achieve this sensitivity gain. Much better seismic isolation and test mass suspensions are responsible for the gains at lower frequencies. Higher laser power, larger test masses and improved mirror coatings lead to the improved sensitivity at mid and high frequencies. Data collecting runs with these new instruments are planned to begin in mid-2015.

  9. Significant advancement of mass spectrometry imaging for food chemistry.

    PubMed

    Yoshimura, Yukihiro; Goto-Inoue, Naoko; Moriyama, Tatsuya; Zaima, Nobuhiro

    2016-11-01

    Food contains various compounds that have an impact on our daily lives. Many technologies have been established to analyze these molecules of interest in foods. However, the analysis of the spatial distribution of these compounds in foods using conventional technology, such as high-performance liquid chromatography-mass spectrometry or gas chromatography-mass spectrometry is difficult. Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) is considered an ideal complementary approach. MALDI-MSI is a two-dimensional MALDI-MS technology that can detect compounds in a tissue section without extraction, purification, separation, or labeling. MALDI-MSI can be used to visualize the spatial distribution of chemical compounds or biomolecules in foods. Although the methodology of MALDI-MSI in food science is not yet fully established, the versatility of MALDI-MSI is expected to open a new frontier in food science. Herein, we describe the principles and applications of MALDI-MSI in food science and related fields. PMID:27211639

  10. Phase II Study Evaluating the Addition of Cetuximab to the Concurrent Delivery of Weekly Carboplatin, Paclitaxel, and Daily Radiotherapy for Patients With Locally Advanced Squamous Cell Carcinomas of the Head and Neck

    SciTech Connect

    Suntharalingam, Mohan; Kwok, Young; Goloubeva, Olga; Parekh, Arti; Taylor, Rodney; Wolf, Jeffrey; Zimrin, Ann; Strome, Scott; Ord, Robert; Cullen, Kevin J.

    2012-04-01

    Purpose: To report the mature data of a prospective Phase II trial designed to evaluate the efficacy of an epidermal growth factor receptor inhibitor cetuximab (CTX) added to the concurrent therapy of weekly paclitaxel/carboplatin (PC) and daily radiation therapy (RT). Methods and Materials: From 2005 to 2009, a total of 43 patients were enrolled in the study. The median follow-up was 31 months (range, 9-59 months). All patients had Stage III/IV disease at presentation, and 67% had oropharyngeal primaries. The weekly IV dose schedules were CTX 250 mg/m{sup 2} (400 mg/m{sup 2} IV loading dose 1 week before RT), paclitaxel 40 mg/m{sup 2}, and carboplatin AUC 2. RT was given at 1.8 Gy per day to 70.2 Gy. Intensity-modulated RTwas used in 70% of cases. Results: All patients completed the planned RT dose, 74% without any treatment breaks. The planned CTX and PC cycles were completed in 70% (91% with at least seven of planned nine cycles) and 56% (93% with at least seven of planned eight cycles) of patients, respectively. Toxicity included Grade 3 mucositis (79%), rash (9%), leucopenia (19%), neutropenia (19%), and RT dermatitis (16%). The complete response (CR) rate at the completion of therapy was 84%. The estimated 3-year local regional control rate was 72%. Six patients with an initial CR subsequently experienced a local recurrence, 10 patients experienced distant progression. The median overall survival and disease-free survivals have not been reached. The 3-year actuarial overall survival and disease-free survival were 59% and 58%, respectively. Conclusions: The addition of CTX to weekly PC and daily RT was well tolerated and resulted in encouraging local control and survival rates.

  11. Recent Advances in Nickel Catalysis

    PubMed Central

    Tasker, Sarah Z.; Standley, Eric A.; Jamison, Timothy F.

    2015-01-01

    Preface The field of nickel catalysis has made tremendous advances in the past decade. There are several key properties of nickel that have allowed for a broad range of innovative reaction development, such as facile oxidative addition and ready access to multiple oxidation states. In recent years, these properties have been increasingly understood and leveraged to perform transformations long considered exceptionally challenging. Herein, we discuss some of the most recent and significant developments in homogeneous nickel catalysis with an emphasis on both synthetic outcome and mechanism. PMID:24828188

  12. Measurement and modeling of advanced coal conversion processes

    SciTech Connect

    Solomon, P.R.; Serio, M.A.; Hamblen, D.G.; Smoot, L.D.; Brewster, B.S. Brigham Young Univ., Provo, UT )

    1991-01-01

    The overall objective of this program is the development of predictive capability for the design, scale up, simulation, control and feedstock evaluation in advanced coal conversion devices. This program will merge significant advances made in measuring and quantitatively describing the mechanisms in coal conversion behavior. Comprehensive computer codes for mechanistic modeling of entrained-bed gasification. Additional capabilities in predicting pollutant formation will be implemented and the technology will be expanded to fixed-bed reactors.

  13. Advanced composite fuselage technology

    NASA Technical Reports Server (NTRS)

    Ilcewicz, Larry B.; Smith, Peter J.; Horton, Ray E.

    1993-01-01

    Boeing's ATCAS program has completed its third year and continues to progress towards a goal to demonstrate composite fuselage technology with cost and weight advantages over aluminum. Work on this program is performed by an integrated team that includes several groups within The Boeing Company, industrial and university subcontractors, and technical support from NASA. During the course of the program, the ATCAS team has continued to perform a critical review of composite developments by recognizing advances in metal fuselage technology. Despite recent material, structural design, and manufacturing advancements for metals, polymeric matrix composite designs studied in ATCAS still project significant cost and weight advantages for future applications. A critical path to demonstrating technology readiness for composite transport fuselage structures was created to summarize ATCAS tasks for Phases A, B, and C. This includes a global schedule and list of technical issues which will be addressed throughout the course of studies. Work performed in ATCAS since the last ACT conference is also summarized. Most activities relate to crown quadrant manufacturing scaleup and performance verification. The former was highlighted by fabricating a curved, 7 ft. by 10 ft. panel, with cocured hat-stiffeners and cobonded J-frames. In building to this scale, process developments were achieved for tow-placed skins, drape formed stiffeners, braided/RTM frames, and panel cure tooling. Over 700 tests and supporting analyses have been performed for crown material and design evaluation, including structural tests that demonstrated limit load requirements for severed stiffener/skin failsafe damage conditions. Analysis of tests for tow-placed hybrid laminates with large damage indicates a tensile fracture toughness that is higher than that observed for advanced aluminum alloys. Additional recent ATCAS achievements include crown supporting technology, keel quadrant design evaluation, and

  14. Significant Scales in Community Structure

    PubMed Central

    Traag, V. A.; Krings, G.; Van Dooren, P.

    2013-01-01

    Many complex networks show signs of modular structure, uncovered by community detection. Although many methods succeed in revealing various partitions, it remains difficult to detect at what scale some partition is significant. This problem shows foremost in multi-resolution methods. We here introduce an efficient method for scanning for resolutions in one such method. Additionally, we introduce the notion of “significance” of a partition, based on subgraph probabilities. Significance is independent of the exact method used, so could also be applied in other methods, and can be interpreted as the gain in encoding a graph by making use of a partition. Using significance, we can determine “good” resolution parameters, which we demonstrate on benchmark networks. Moreover, optimizing significance itself also shows excellent performance. We demonstrate our method on voting data from the European Parliament. Our analysis suggests the European Parliament has become increasingly ideologically divided and that nationality plays no role. PMID:24121597

  15. Advance Care Planning.

    PubMed

    Stallworthy, Elizabeth J

    2013-04-16

    Advance care planning should be available to all patients with chronic kidney disease, including end-stage kidney disease on renal replacement therapy. Advance care planning is a process of patient-centred discussion, ideally involving family/significant others, to assist the patient to understand how their illness might affect them, identify their goals and establish how medical treatment might help them to achieve these. An Advance Care Plan is only one useful outcome from the Advance Care Planning process, the education of patient and family around prognosis and treatment options is likely to be beneficial whether or not a plan is written or the individual loses decision making capacity at the end of life. Facilitating Advance Care Planning discussions requires an understanding of their purpose and communication skills which need to be taught. Advance Care Planning needs to be supported by effective systems to enable the discussions and any resulting Plans to be used to aid subsequent decision making. PMID:23586906

  16. Pathological Significance of Mitochondrial Glycation

    PubMed Central

    Pun, Pamela Boon Li; Murphy, Michael P.

    2012-01-01

    Glycation, the nonenzymatic glycosylation of biomolecules, is commonly observed in diabetes and ageing. Reactive dicarbonyl species such as methylglyoxal and glyoxal are thought to be major physiological precursors of glycation. Because these dicarbonyls tend to be formed intracellularly, the levels of advanced glycation end products on cellular proteins are higher than on extracellular ones. The formation of glycation adducts within cells can have severe functional consequences such as inhibition of protein activity and promotion of DNA mutations. Although several lines of evidence suggest that there are specific mitochondrial targets of glycation, and mitochondrial dysfunction itself has been implicated in disease and ageing, it is unclear if glycation of biomolecules specifically within mitochondria induces dysfunction and contributes to disease pathology. We discuss here the possibility that mitochondrial glycation contributes to disease, focussing on diabetes, ageing, cancer, and neurodegeneration, and highlight the current limitations in our understanding of the pathological significance of mitochondrial glycation. PMID:22778743

  17. Advancing videotape parent training: a comparison study.

    PubMed

    Webster-Stratton, C

    1994-06-01

    This study examines the specific effects of adding a broader based, videotape treatment component (ADVANCE) to a basic videotape parent skills training program (GDVM). ADVANCE treatment trains parents to cope with interpersonal distress through improved communication, problem solving, and self-control skills. Seventy-eight families with a child diagnosed as oppositional-defiant or conduct-disordered were randomly assigned to either GDVM alone or GDVM plus ADVANCE. Parent reports of child adjustment and parent distress, assessment of child's knowledge of social skills, as well as independent observations of mother-and father-child interactions and communication and of problem solving between parents were obtained at pre- and post-GDVM and at post-ADVANCE. Both groups significantly improved at short-term follow-up. ADVANCE produced additional significant improvements in parents' communication, problem-solving skills, and consumer satisfaction, as well as children's increased knowledge of prosocial solutions. The clinical significance of these findings is discussed. PMID:8063985

  18. Significant lexical relationships

    SciTech Connect

    Pedersen, T.; Kayaalp, M.; Bruce, R.

    1996-12-31

    Statistical NLP inevitably deals with a large number of rare events. As a consequence, NLP data often violates the assumptions implicit in traditional statistical procedures such as significance testing. We describe a significance test, an exact conditional test, that is appropriate for NLP data and can be performed using freely available software. We apply this test to the study of lexical relationships and demonstrate that the results obtained using this test are both theoretically more reliable and different from the results obtained using previously applied tests.

  19. Statistical Significance Testing.

    ERIC Educational Resources Information Center

    McLean, James E., Ed.; Kaufman, Alan S., Ed.

    1998-01-01

    The controversy about the use or misuse of statistical significance testing has become the major methodological issue in educational research. This special issue contains three articles that explore the controversy, three commentaries on these articles, an overall response, and three rejoinders by the first three authors. They are: (1)…

  20. Lack of Statistical Significance

    ERIC Educational Resources Information Center

    Kehle, Thomas J.; Bray, Melissa A.; Chafouleas, Sandra M.; Kawano, Takuji

    2007-01-01

    Criticism has been leveled against the use of statistical significance testing (SST) in many disciplines. However, the field of school psychology has been largely devoid of critiques of SST. Inspection of the primary journals in school psychology indicated numerous examples of SST with nonrandom samples and/or samples of convenience. In this…

  1. Advanced capacitors

    NASA Astrophysics Data System (ADS)

    Ennis, J. B.; Buritz, R. S.

    1984-10-01

    This report describes an experimental program to develop and test advanced dielectric materials for capacitors for airborne power systems. Five classes of capacitors were considered: high rep rate and low rep rate pulse capacitors for use in pulse-forming networks, high voltage filter capacitors, high frequency AC capacitors for series resonant inverters, and AC filter capacitors. To meet these requirements, existing dielectric materials were modified, and new materials were developed. The initial goal was to develop an improved polysulfone film with fewer imperfections that could operate at significantly higher electrical stresses. It was shown that contaminants enter the film via the resin and solvent, and that they can be partially removed. As far as developed, however, these treatments did not significantly improved the breakdown characteristics. The technique of casting films on a roughened drum was demonstrated, and found useful in preparing textured films -- the first step toward a replacement for Kraft paper. A new material, Ultem, was proposed for use in high energy density capacitors. This new polyetherimide resin has properties similar to polysulfone and polyimide, with improvement in breakdown characteristics and temperature capability. This material was selected for further study in model capacitor designs.

  2. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects. PMID:24772784

  3. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  4. Advanced information society(7)

    NASA Astrophysics Data System (ADS)

    Chiba, Toshihiro

    Various threats are hiding in advanced informationalized society. As we see car accident problems in motorization society light aspects necessarily accompy shady ones. Under the changing circumstances of advanced informationalization added values of information has become much higher. It causes computer crime, hacker, computer virus to come to the surface. In addition it can be said that infringement of intellectual property and privacy are threats brought by advanced information. Against these threats legal, institutional and insurance measures have been progressed, and newly security industry has been established. However, they are not adequate individually or totally. The future vision should be clarified, and countermeasures according to the visions have to be considered.

  5. Recent additions in the treatment of cough

    PubMed Central

    Gibson, Peter G.

    2014-01-01

    Background Worldwide, cough is regarded as a challenging clinical problem due to its frequency and often limited therapeutic options. Chronic cough that remains refractory to usual medical treatment causes significant quality of life impairment in people with this problem. Methods We have examined current evidence on recent additions in the treatment of cough, specifically treatment of refractory chronic cough with speech pathology and gabapentin. Relevant randomised control trials, reviews and case reports were identified through a PubMed and SCOPUS search of English-language literature referring to these concepts over the last eight years. Summary Of the one hundred and two articles comprising this review the majority investigated the role of the transient receptor potential (TRP) receptors TRP Vanilloid 1 (TRPV1) and TRPA1 in cough and the potential of TRP antagonists as effective anti-tussives. However, these have only been tested in the laboratory and therefore their clinical effectiveness is unknown. Behavioural treatments such as speech pathology have gained momentum and this was evident in the increasing number of articles investigating its positive effect on cough. Investigation on the effectiveness of neuromodulating medications in the treatment of cough have been supported primarily through case series reports and prospective reviews however; their use (particularly gabapentin) has been significantly advanced through recently conducted randomised controlled trials. Conclusions Recent additions in the treatment of chronic cough have been significant as they consider cough to have a unifying diagnosis of cough hypersensitivity with or without the presence of a neuropathic basis. Primarily, effective treatments for chronic cough target these areas and include behavioural treatment such as speech pathology and pharmaceutical treatment with neuromodulating medications such as gabapentin. PMID:25383209

  6. Telecommunications: Additional Federal Efforts Could Help Advance Digital Television Transition

    NASA Astrophysics Data System (ADS)

    2002-11-01

    The transition to broadcast digital television(DTV) will provide new television services and the improved picture quality of 'high definition television'. It will also allow some portions of the radiofrequency spectrum used for broadcasting to be returned for public safety and commercial uses. The Congress set December 2006 as the target date for completing the DTV transition and turning the analog broadcast signals. However, this date can be extended if fewer than 85 percent of households in a market are able to receive the digital signals. GAO (General Accounting Office) was asked to assess issues related to the DTV transition.

  7. Additive usage levels.

    PubMed

    Langlais, R

    1996-01-01

    With the adoption of the European Parliament and Council Directives on sweeteners, colours and miscellaneous additives the Commission is now embarking on the project of coordinating the activities of the European Union Member States in the collection of the data that are to make up the report on food additive intake requested by the European Parliament. This presentation looks at the inventory of available sources on additive use levels and concludes that for the time being national legislation is still the best source of information considering that the directives have yet to be transposed into national legislation. Furthermore, this presentation covers the correlation of the food categories as found in the additives directives with those used by national consumption surveys and finds that in a number of instances this correlation still leaves a lot to be desired. The intake of additives via food ingestion and the intake of substances which are chemically identical to additives but which occur naturally in fruits and vegetables is found in a number of cases to be higher than the intake of additives added during the manufacture of foodstuffs. While the difficulties are recognized in contributing to the compilation of food additive intake data, industry as a whole, i.e. the food manufacturing and food additive manufacturing industries, are confident that in a concerted effort, use data on food additives by industry can be made available. Lastly, the paper points out that with the transportation of the additives directives into national legislation and the time by which the food industry will be able to make use of the new food legislative environment several years will still go by; food additives use data by the food industry will thus have to be reviewed at the beginning of the next century. PMID:8792135

  8. An additional middle cuneiform?

    PubMed Central

    Brookes-Fazakerley, S.D.; Jackson, G.E.; Platt, S.R.

    2015-01-01

    Additional cuneiform bones of the foot have been described in reference to the medial bipartite cuneiform or as small accessory ossicles. An additional middle cuneiform has not been previously documented. We present the case of a patient with an additional ossicle that has the appearance and location of an additional middle cuneiform. Recognizing such an anatomical anomaly is essential for ruling out second metatarsal base or middle cuneiform fractures and for the preoperative planning of arthrodesis or open reduction and internal fixation procedures in this anatomical location. PMID:26224890

  9. Additional Treatments Offer Little Benefit for Pancreatic Cancer: Study

    MedlinePlus

    ... 158633.html Additional Treatments Offer Little Benefit for Pancreatic Cancer: Study Neither extra chemotherapy drug nor add-on ... 2016 (HealthDay News) -- Additional treatments for locally advanced pancreatic cancer don't appear to boost survival, a new ...

  10. Statistical or biological significance?

    PubMed

    Saxon, Emma

    2015-01-01

    Oat plants grown at an agricultural research facility produce higher yields in Field 1 than in Field 2, under well fertilised conditions and with similar weather exposure; all oat plants in both fields are healthy and show no sign of disease. In this study, the authors hypothesised that the soil microbial community might be different in each field, and these differences might explain the difference in oat plant growth. They carried out a metagenomic analysis of the 16 s ribosomal 'signature' sequences from bacteria in 50 randomly located soil samples in each field to determine the composition of the bacterial community. The study identified >1000 species, most of which were present in both fields. The authors identified two plant growth-promoting species that were significantly reduced in soil from Field 2 (Student's t-test P < 0.05), and concluded that these species might have contributed to reduced yield. PMID:26541972

  11. Anthropological significance of phenylketonuria.

    PubMed

    Saugstad, L F

    1975-01-01

    The highest incidence rates of phenylketonuria (PKU) have been observed in Ireland and Scotlant. Parents heterozygous for PKU in Norway differ significantly from the general population in the Rhesus, Kell and PGM systems. The parents investigated showed an excess of Rh negative, Kell plus and PGM type 1 individuals, which makes them similar to the present populations in Ireland and Scotlant. It is postulated that the heterozygotes for PKU in Norway are descended from a completely assimilated sub-population of Celtic origin, who came or were brought here, 1ooo years ago. Bronze objects of Western European (Scottish, Irish) origin, found in Viking graves widely distributed in Norway, have been taken as evidence of Vikings returning with loot (including a number of Celts) from Western Viking settlements. The continuity of residence since the Viking age in most habitable parts of Norway, and what seems to be a nearly complete regional relationship between the sites where Viking graves contain western imported objects and the birthplaces of grandparents of PKUs identified in Norway, lend further support to the hypothesis that the heterozygotes for PKU in Norway are descended from a completely assimilated subpopulation. The remarkable resemblance between Iceland and Ireland, in respect of several genetic markers (including the Rhesus, PGM and Kell systems), is considered to be an expression of a similar proportion of people of Celtic origin in each of the two countries. Their identical, high incidence rates of PKU are regarded as further evidence of this. The significant decline in the incidence of PKU when one passes from Ireland, Scotland and Iceland, to Denmark and on to Norway and Sweden, is therefore explained as being related to a reduction in the proportion of inhabitants of Celtic extraction in the respective populations. PMID:803884

  12. Carbamate deposit control additives

    SciTech Connect

    Honnen, L.R.; Lewis, R.A.

    1980-11-25

    Deposit control additives for internal combustion engines are provided which maintain cleanliness of intake systems without contributing to combustion chamber deposits. The additives are poly(oxyalkylene) carbamates comprising a hydrocarbyloxyterminated poly(Oxyalkylene) chain of 2-5 carbon oxyalkylene units bonded through an oxycarbonyl group to a nitrogen atom of ethylenediamine.

  13. Advanced capacitors

    NASA Astrophysics Data System (ADS)

    Parker, R. D.; Buritz, R. S.; Taylor, A. R.; Bullwinkel, E. P.

    1982-11-01

    An experimental development program was conducted to develop and test advanced dielectric materials for capacitors for airborne power systems. High rep rate and low rate capacitors for use in pulse-forming networks, high voltage filter capacitors, and high frequency ac capacitors for series resonant inverters were considered. The initial goal was to develop an improved polysulfone film. Initially, low breakdown strength was thought to be related to inclusions of conductive particles. The effect of filtration of the casting solution was investigated. These experiments showed that more filtration was not the entire solution to low breakdown. The film samples were found to contain dissolved ionic impurities that move through the dielectric when voltage is applied and cause enhancement of the electric field. These contaminants enter the film via the resin and solvent, and can be partially removed. However, these treatments did not significantly improve the breakdown characteristics. A new material, Ultem, was proposed for use in high energy density capacitors. This new polyetherimide resin has properties similar to polysulfone and polyimide, with improvement in breakdown characteristics and temperature capability. The technique of casting films on a roughened drum was demonstrated, and found useful in preparing textured films. this is the first step toward a replacement for kraft paper.

  14. Advances in the management of chronic thromboembolic pulmonary hypertension.

    PubMed

    Papamatheakis, Demosthenes G; Kim, Nick H

    2015-09-01

    Chronic thromboembolic pulmonary hypertension (CTEPH), a potentially curable form of pulmonary hypertension with pulmonary thromboendarterectomy surgery, has been the focus of significant medical advances. In addition to new imaging modalities that are now used to help recognize and diagnose CTEPH, additional treatment options have emerged for inoperable cases. These include a newly approved medical therapy for inoperable disease or persistent/recurrent CTEPH as well as percutaneous balloon angioplasty of the pulmonary arteries. In this article, we summarize these recent advances in the field and review the related literature. PMID:26239014

  15. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  16. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  17. Significant Radionuclides Determination

    SciTech Connect

    Jo A. Ziegler

    2001-07-31

    The purpose of this calculation is to identify radionuclides that are significant to offsite doses from potential preclosure events for spent nuclear fuel (SNF) and high-level radioactive waste expected to be received at the potential Monitored Geologic Repository (MGR). In this calculation, high-level radioactive waste is included in references to DOE SNF. A previous document, ''DOE SNF DBE Offsite Dose Calculations'' (CRWMS M&O 1999b), calculated the source terms and offsite doses for Department of Energy (DOE) and Naval SNF for use in design basis event analyses. This calculation reproduces only DOE SNF work (i.e., no naval SNF work is included in this calculation) created in ''DOE SNF DBE Offsite Dose Calculations'' and expands the calculation to include DOE SNF expected to produce a high dose consequence (even though the quantity of the SNF is expected to be small) and SNF owned by commercial nuclear power producers. The calculation does not address any specific off-normal/DBE event scenarios for receiving, handling, or packaging of SNF. The results of this calculation are developed for comparative analysis to establish the important radionuclides and do not represent the final source terms to be used for license application. This calculation will be used as input to preclosure safety analyses and is performed in accordance with procedure AP-3.12Q, ''Calculations'', and is subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (DOE 2000) as determined by the activity evaluation contained in ''Technical Work Plan for: Preclosure Safety Analysis, TWP-MGR-SE-000010'' (CRWMS M&O 2000b) in accordance with procedure AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities''.

  18. Fungi producing significant mycotoxins.

    PubMed

    2012-01-01

    Mycotoxins are secondary metabolites of microfungi that are known to cause sickness or death in humans or animals. Although many such toxic metabolites are known, it is generally agreed that only a few are significant in causing disease: aflatoxins, fumonisins, ochratoxin A, deoxynivalenol, zearalenone, and ergot alkaloids. These toxins are produced by just a few species from the common genera Aspergillus, Penicillium, Fusarium, and Claviceps. All Aspergillus and Penicillium species either are commensals, growing in crops without obvious signs of pathogenicity, or invade crops after harvest and produce toxins during drying and storage. In contrast, the important Fusarium and Claviceps species infect crops before harvest. The most important Aspergillus species, occurring in warmer climates, are A. flavus and A. parasiticus, which produce aflatoxins in maize, groundnuts, tree nuts, and, less frequently, other commodities. The main ochratoxin A producers, A. ochraceus and A. carbonarius, commonly occur in grapes, dried vine fruits, wine, and coffee. Penicillium verrucosum also produces ochratoxin A but occurs only in cool temperate climates, where it infects small grains. F. verticillioides is ubiquitous in maize, with an endophytic nature, and produces fumonisins, which are generally more prevalent when crops are under drought stress or suffer excessive insect damage. It has recently been shown that Aspergillus niger also produces fumonisins, and several commodities may be affected. F. graminearum, which is the major producer of deoxynivalenol and zearalenone, is pathogenic on maize, wheat, and barley and produces these toxins whenever it infects these grains before harvest. Also included is a short section on Claviceps purpurea, which produces sclerotia among the seeds in grasses, including wheat, barley, and triticale. The main thrust of the chapter contains information on the identification of these fungi and their morphological characteristics, as well as factors

  19. Advanced Hydrogen Turbine Development

    SciTech Connect

    Joesph Fadok

    2008-01-01

    advanced hydrogen turbine that meets the aggressive targets set forth for the advanced hydrogen turbine, including increased rotor inlet temperature (RIT), lower total cooling and leakage air (TCLA) flow, higher pressure ratio, and higher mass flow through the turbine compared to the baseline. Maintaining efficiency with high mass flow Syngas combustion is achieved using a large high AN2 blade 4, which has been identified as a significant advancement beyond the current state-of-the-art. Preliminary results showed feasibility of a rotor system capable of increased power output and operating conditions above the baseline. In addition, several concepts were developed for casing components to address higher operating conditions. Rare earth modified bond coat for the purpose of reducing oxidation and TBC spallation demonstrated an increase in TBC spallation life of almost 40%. The results from Phase 1 identified two TBC compositions which satisfy the thermal conductivity requirements and have demonstrated phase stability up to temperatures of 1850 C. The potential to join alloys using a bonding process has been demonstrated and initial HVOF spray deposition trials were promising. The qualitative ranking of alloys and coatings in environmental conditions was also performed using isothermal tests where significant variations in alloy degradation were observed as a function of gas composition. Initial basic system configuration schematics and working system descriptions have been produced to define key boundary data and support estimation of costs. Review of existing materials in use for hydrogen transportation show benefits or tradeoffs for materials that could be used in this type of applications. Hydrogen safety will become a larger risk than when using natural gas fuel as the work done to date in other areas has shown direct implications for this type of use. Studies were conducted which showed reduced CO{sub 2} and NOx emissions with increased plant efficiency. An approach to

  20. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  1. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  2. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  3. [Advanced Composites Technology Initiatives

    NASA Technical Reports Server (NTRS)

    Julian, Mark R.

    2002-01-01

    This final report closes out the W02 NASA Grant #NCC5-646. The FY02 grant for advanced technology initiatives through the Advanced Composites Technology Institute in Bridgeport, WV, at the Robert C. Byrd Institute (RCBI) Bridgeport Manufacturing Technology Center, is complete; all funding has been expended. RCBI continued to expand access to technology; develop and implement a workforce-training curriculum; improve material development; and provide prototyping and demonstrations of new and advanced composites technologies for West Virginia composites firms. The FY 02 efforts supported workforce development, technical training and the HST development effort of a super-lightweight composite carrier prototype and expanded the existing technical capabilities of the growing aerospace industry across West Virginia to provide additional support for NASA missions. Additionally, the Composites Technology and Training Center was awarded IS0 9001 - 2000 certification and Cleanroom Class 1000 certification during this report period.

  4. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  5. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  6. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  7. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  8. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  9. 42 CFR 52.9 - Additional conditions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Additional conditions. 52.9 Section 52.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR RESEARCH PROJECTS... conditions are necessary to assure or protect advancement of the approved project, the interests of...

  10. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  11. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  12. The clinical significance of small subarachnoid hemorrhages.

    PubMed

    Albertine, Paul; Borofsky, Samuel; Brown, Derek; Patel, Smita; Lee, Woojin; Caputy, Anthony; Taheri, M Reza

    2016-06-01

    With advancing technology, the sensitivity of computed tomography (CT) for the detection of traumatic subarachnoid hemorrhage (tSAH) continues to improve. Increased resolution has allowed for the detection of hemorrhage that is limited to one or two images of the CT exam. At our institution, all patients with a SAH require intensive care unit (ICU) admission, regardless of size. It was our hypothesis that patients with small subarachnoid hemorrhage experience favorable outcomes, and may not require the intensive monitoring offered in the ICU. This retrospective study evaluated 62 patients between 2011 and 2014 who presented to our Level I trauma center emergency room for acute traumatic injuries, and found to have subarachnoid hemorrhages on CT examination. The grade of subarachnoid hemorrhage was determined using previously utilized scoring systems, such as the Fisher, Modified Fisher, and Claassen grading systems. Electronic medical records were used to evaluate for medical decline, neurological decline, neurosurgical intervention, and overall hospital course. Admitting co-morbidities were noted, as were the presence of patient intoxication and use of anticoagulants. Patient outcomes were based on discharge summaries upon which the neurological status of the patient was assessed. Each patient was given a score based on the Glasgow outcome scale. The clinical and imaging profile of 62 patients with traumatic SAH were studied. Of the 62 patients, 0 % underwent neurosurgical intervention, 6.5 % had calvarial fractures, 25.8 % had additional intracranial hemorrhages, 27.4 % of the patients had significant co-morbidities, and 1.6 % of the patients expired. Patients with low-grade tSAH spent less time in the ICU, demonstrated neurological and medical stability during hospitalization. None of the patients with low-grade SAH experienced seizure during their admission. In our study, patients with low-grade tSAH demonstrated favorable clinical outcomes. This suggests

  13. Advanced Microsensors

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This video looks at a spinoff application of the technology from advanced microsensors -- those that monitor and determine conditions of spacecraft like the Space Shuttle. The application featured is concerned with the monitoring of the health of premature babies.

  14. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  15. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  16. Advanced Production Planning Models

    SciTech Connect

    JONES,DEAN A.; LAWTON,CRAIG R.; KJELDGAARD,EDWIN A.; WRIGHT,STEPHEN TROY; TURNQUIST,MARK A.; NOZICK,LINDA K.; LIST,GEORGE F.

    2000-12-01

    >This report describes the innovative modeling approach developed as a result of a 3-year Laboratory Directed Research and Development project. The overall goal of this project was to provide an effective suite of solvers for advanced production planning at facilities in the nuclear weapons complex (NWC). We focused our development activities on problems related to operations at the DOE's Pantex Plant. These types of scheduling problems appear in many contexts other than Pantex--both within the NWC (e.g., Neutron Generators) and in other commercial manufacturing settings. We successfully developed an innovative and effective solution strategy for these types of problems. We have tested this approach on actual data from Pantex, and from Org. 14000 (Neutron Generator production). This report focuses on the mathematical representation of the modeling approach and presents three representative studies using Pantex data. Results associated with the Neutron Generator facility will be published in a subsequent SAND report. The approach to task-based scheduling described here represents a significant addition to the literature for large-scale, realistic scheduling problems in a variety of production settings.

  17. Ceramic Technology for Advanced Heat Engines Project

    SciTech Connect

    Not Available

    1990-08-01

    The Ceramic Technology For Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DOD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic hearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  18. [Gastroenterology: recent advances and perspectives].

    PubMed

    Dobrilla, Giorgio

    2006-12-01

    Among the significant current topics in gastroenterology, the endoscopic capsule, virtual colonography, and ischaemic colitis deserve special considerations. Main indications of the endoscopic capsule are the diagnosis of small intestinal (bleeding) angiodysplasias, Crohn's lesions and tumours. The main drawbacks are gastrointestinal blockage of the capsule due to stenosis and flat batteries before the capsule reaches the distal small intestine. Future advantages may stem from a wider pre-use of an auto-digestible capsule capable of pre-cautionary excluding stenotic gastrointestinal segments ant the pill-cam for the evaluation of the oesophagus. Virtual colonography is a promising and attractive non-invasive alternative for the detection of tumoral colonic lesions (polyps and cancers). Its specific role as a screening procedure or investigation of symptomatic patients has to be better established. In a near future development of patients-friendly bowel preparation, high standard level of the evaluators and advances in computed software should likely allow a better definition of its overall potential. Ischaemic colitis is still a very difficult proposition for gastroenterologists and surgeons from any point of view. Its prompt recognition is a very significant advantage for the therapy. In addition to the advances in diagnostics and therapy, recent data have been reported as far as the pathogenesis of ischaemic colitis is concerned. Useful information has paradoxically come from the side effects of the 5-HT3 antagonists and 5-HT4 agonists used in treatment of irritable bowel syndrome patients. PMID:17252732

  19. Tracking short-term effects of 15N addition on N2O fluxes using FTIR spectroscopy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Anthropogenic nitrogen (N) additions to soils have significantly increased atmospheric nitrous oxide (N2O) concentration, and advanced methods are needed to track the amount of applied N that is transformed to N2O in the field. Here, we present a method for continuous measurement of N2O isotopologu...

  20. Boron addition to alloys

    SciTech Connect

    Coad, B. C.

    1985-08-20

    A process for addition of boron to an alloy which involves forming a melt of the alloy and a reactive metal, selected from the group consisting of aluminum, titanium, zirconium and mixtures thereof to the melt, maintaining the resulting reactive mixture in the molten state and reacting the boric oxide with the reactive metal to convert at least a portion of the boric oxide to boron which dissolves in the resulting melt, and to convert at least portion of the reactive metal to the reactive metal oxide, which oxide remains with the resulting melt, and pouring the resulting melt into a gas stream to form a first atomized powder which is subsequently remelted with further addition of boric oxide, re-atomized, and thus reprocessed to convert essentially all the reactive metal to metal oxide to produce a powdered alloy containing specified amounts of boron.

  1. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  2. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  3. [Biologically active food additives].

    PubMed

    Velichko, M A; Shevchenko, V P

    1998-07-01

    More than half out of 40 projects for the medical science development by the year of 2000 have been connected with the bio-active edible additives that are called "the food of XXI century", non-pharmacological means for many diseases. Most of these additives--nutricevtics and parapharmacevtics--are intended for the enrichment of food rations for the sick or healthy people. The ecologicaly safest and most effective are combined domestic adaptogens with immuno-modulating and antioxidating action that give anabolic and stimulating effect,--"leveton", "phytoton" and "adapton". The MKTs-229 tablets are residue discharge means. For atherosclerosis and general adiposis they recommend "tsar tablets" and "aiconol (ikhtien)"--on the base of cod-liver oil or "splat" made out of seaweed (algae). All these preparations have been clinically tested and received hygiene certificates from the Institute of Dietology of the Russian Academy of Medical Science. PMID:9752776

  4. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  5. Hydrocarbon fuel additive

    SciTech Connect

    Ambrogio, S.

    1989-02-28

    This patent describes the method of fuel storage or combustion, wherein the fuel supply contains small amounts of water, the step of adding to the fuel supply an additive comprising a blend of a hydrophilic agent chosen from the group of ethylene glycol, n-butyl alcohol, and cellosolve in the range of 22-37% by weight; ethoxylated nonylphenol in the range of 26-35% by weight; nonylphenol polyethylene glycol ether in the range of 32-43% by weight.

  6. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online. PMID:24729671

  7. A Proposed Fourth Measure of Significance: The Role of Economic Significance in Educational Research

    ERIC Educational Resources Information Center

    Leech, Nancy L.; Onwuegbuzie, Anthony J.

    2004-01-01

    The purpose of this paper is to examine economic significance as a fourth measure of significance. In addition to describing and operationalising the concept of economic significance, a typology of economic significance indices is presented, including an example of how to compute these measures, as well as how to utilise them in applied research.…

  8. Advanced Electrophysiologic Mapping Systems

    PubMed Central

    2006-01-01

    arrhythmias (e.g., typical atrial flutter and atrial ventricular nodal re-entrant tachycardia), for which the success rates using the fluoroscopy approach were extremely high and unlikely to be improved upon using nonfluoroscopic mapping. By age 50, almost 100% of people who have had surgery for congenital heart disease will develop arrhythmia. Some centres are under greater pressure because of expertise in complex ablation procedures for subsets of patients. The use of advanced mapping systems requires the support of additional electrophysiologic laboratory time and nursing time. Conclusions For patients suffering from symptomatic, drug-refractory atrial fibrillation and are otherwise healthy, catheter ablation offers a treatment option that is less invasive than is open surgical ablation. Small RCTs that may have been limited by type 2 errors showed significant reductions in fluoroscopy exposure in nonfluoroscopy-guided ablation and a trend toward lower overall failure rate that did not reach statistical significance. Pooled analysis suggests that advanced mapping systems may reduce the overall failure rate in the ablation of atrial fibrillation. Observational studies suggest that ablation guided by complex mapping/navigation systems is a promising treatment for complex arrhythmias such as highly symptomatic, drug-refractory atrial fibrillation for which rate control is not an option In people with atrial fibrillation, ablation guided by advanced nonfluoroscopy mapping resulted in arrhythmia free rates of 80% or higher, reduced mortality, and better quality of life at experienced centres. Although generally safe, serious complications such as stroke, atrial-esophageal, and pulmonary vein stenosis had been reported following ablation procedures. Experts advised that advanced mapping systems are also required for catheter ablation of: Hemodynamically unstable ventricular tachycardia from ischemic heart disease Macro re-entrant atrial tachycardia after surgical correction of

  9. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  10. Oil additive process

    SciTech Connect

    Bishop, H.

    1988-10-18

    This patent describes a method of making an additive comprising: (a) adding 2 parts by volume of 3% sodium hypochlorite to 45 parts by volume of diesel oil fuel to form a sulphur free fuel, (b) removing all water and foreign matter formed by the sodium hypochlorite, (c) blending 30 parts by volume of 24% lead naphthanate with 15 parts by volume of the sulphur free fuel, 15 parts by volume of light-weight material oil to form a blended mixture, and (d) heating the blended mixture slowly and uniformly to 152F.

  11. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  12. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  13. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  14. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  15. Advanced drilling systems study

    SciTech Connect

    Pierce, K.G.; Livesay, B.J.

    1995-03-01

    This work was initiated as part of the National Advanced Drilling and Excavation Technologies (NADET) Program. It is being performed through joint finding from the Department of Energy Geothermal Division and the Natural Gas Technology Branch, Morgantown Energy Technology Center. Interest in advanced drilling systems is high. The Geothermal Division of the Department of Energy has initiated a multi-year effort in the development of advanced drilling systems; the National Research Council completed a study of drilling and excavation technologies last year; and the MIT Energy Laboratory recently submitted a proposal for a national initiative in advanced drilling and excavation research. The primary reasons for this interest are financial. Worldwide expenditures on oil and gas drilling approach $75 billion per year. Also, drilling and well completion account for 25% to 50% of the cost of producing electricity from geothermal energy. There is incentive to search for methods to reduce the cost of drilling. Work on ideas to improve or replace rotary drilling technology dates back at least to the 1930`s. There was a significant amount of work in this area in the 1960`s and 1970`s; and there has been some continued effort through the 1980`s. Undoubtedly there are concepts for advanced drilling systems that have yet to be studied; however, it is almost certain that new efforts to initiate work on advanced drilling systems will build on an idea or a variation of an idea that has already been investigated. Therefore, a review of previous efforts coupled with a characterization of viable advanced drilling systems and the current state of technology as it applies to those systems provide the basis for the current study of advanced drilling.

  16. Research Advances

    ERIC Educational Resources Information Center

    King, Angela G.

    2004-01-01

    Research advances, a new feature in Journal of Chemical Engineering that brings information about innovations in current areas of research to high school and college science faculty with an intent to provide educators with timely descriptions of latest progress in research that can be integrated into existing courses to update course content and…

  17. Nonlinear dynamics of additive pulse modelocked lasers

    SciTech Connect

    Sucha, G.; Bolton, S.R.; Chemla, D.S.

    1995-04-01

    Nonlinear dynamics have been studied in a number of modelocked laser systems, primarily in actively modelocked systems. However, less attention has been paid to the dynamics of passively modelocked laser systems. With the recent revolutionary advances in femtosecond modelocked laser technology, the understanding of instabilities and dynamics in passively modelocked lasers is an important issue. Here, the authors present experimental and numerical studies of the dynamics of an additive-pulse modelocked (APM) color-center laser.

  18. MAGNETOMETRY, SELF-POTENTIAL, AND SEISMIC - ADDITIONAL GEOPHYSICAL METHODS HAVING POTENTIALLY SIGNIFICANT FUTURE UTILIZATION IN AGRICULTURE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Geophysical methods can provide important information in agricultural settings, and the use of these techniques are becoming more and more widespread. Magnetrometry, self-potential, and seismic are three geophysical methods, all of which have the potential for substantial future use in agriculture, ...

  19. 25 CFR 214.9 - Advance rental.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Advance rental. 214.9 Section 214.9 Indians BUREAU OF..., OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.9 Advance rental. (a) Lessees shall pay, in addition to other considerations, annual advance rentals as follows: 15 cents per acre for the first year; 30...

  20. Recent advances in understanding and managing asthma.

    PubMed

    Loo, Su-Ling; Wark, Peter A B

    2016-01-01

    This review highlights the important articles published in the area of asthma research from January 2015 to July 2016. In basic science, significant advances have been made in understanding the link between the innate immune response and type II acquired immune responses in asthma and the role of the airway epithelium. Novel information continues to emerge with regard to the pathogenesis and heterogeneity of severe asthma. There have been important translational clinical trials in the areas of childhood asthma, treatment of allergy to improve asthma outcomes, and improving drug delivery to optimize the management of asthma. In addition, there are increasing data concerning the application of biological agents to the management of severe asthma. This body of work discusses the most notable advances in the understanding and management of asthma. PMID:27610226

  1. Advances in Primary Central Nervous System Lymphoma.

    PubMed

    Patrick, Lauren B; Mohile, Nimish A

    2015-12-01

    Primary central nervous system lymphoma (PCNSL) is a rare form of non-Hodgkin lymphoma that is limited to the CNS. Although novel imaging techniques aid in discriminating lymphoma from other brain tumors, definitive diagnosis requires brain biopsy, vitreoretinal biopsy, or cerebrospinal fluid analysis. Survival rates in clinical studies have improved over the past 20 years due to the addition of high-dose methotrexate-based chemotherapy regimens to whole-brain radiotherapy. Long-term survival, however, is complicated by clinically devastating delayed neurotoxicity. Newer regimens are attempting to reduce or eliminate radiotherapy from first-line treatment with chemotherapy dose intensification. Significant advances have also been made in the fields of pathobiology and treatment, with more targeted treatments on the horizon. The rarity of the disease makes conducting of prospective clinical trials challenging, requiring collaborative efforts between institutions. This review highlights recent advances in the biology, detection, and treatment of PCNSL in immunocompetent patients. PMID:26475775

  2. Recent advances in understanding and managing asthma

    PubMed Central

    Loo, Su-Ling; Wark, Peter A.B.

    2016-01-01

    This review highlights the important articles published in the area of asthma research from January 2015 to July 2016. In basic science, significant advances have been made in understanding the link between the innate immune response and type II acquired immune responses in asthma and the role of the airway epithelium. Novel information continues to emerge with regard to the pathogenesis and heterogeneity of severe asthma. There have been important translational clinical trials in the areas of childhood asthma, treatment of allergy to improve asthma outcomes, and improving drug delivery to optimize the management of asthma. In addition, there are increasing data concerning the application of biological agents to the management of severe asthma. This body of work discusses the most notable advances in the understanding and management of asthma. PMID:27610226

  3. Advanced Combustion

    SciTech Connect

    Holcomb, Gordon R.

    2013-03-11

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  4. Advanced computing

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Advanced concepts in hardware, software and algorithms are being pursued for application in next generation space computers and for ground based analysis of space data. The research program focuses on massively parallel computation and neural networks, as well as optical processing and optical networking which are discussed under photonics. Also included are theoretical programs in neural and nonlinear science, and device development for magnetic and ferroelectric memories.

  5. Advanced Nanoemulsions

    NASA Astrophysics Data System (ADS)

    Fryd, Michael M.; Mason, Thomas G.

    2012-05-01

    Recent advances in the growing field of nanoemulsions are opening up new applications in many areas such as pharmaceuticals, foods, and cosmetics. Moreover, highly controlled nanoemulsions can also serve as excellent model systems for investigating basic scientific questions about soft matter. Here, we highlight some of the most recent developments in nanoemulsions, focusing on methods of formation, surface modification, material properties, and characterization. These developments provide insight into the substantial advantages that nanoemulsions can offer over their microscale emulsion counterparts.

  6. Advanced Hydrogen Turbine Development

    SciTech Connect

    Marra, John

    2015-09-30

    Under the sponsorship of the U.S. Department of Energy (DOE) National Energy Technology Laboratories, Siemens has completed the Advanced Hydrogen Turbine Development Program to develop an advanced gas turbine for incorporation into future coal-based Integrated Gasification Combined Cycle (IGCC) plants. All the scheduled DOE Milestones were completed and significant technical progress was made in the development of new technologies and concepts. Advanced computer simulations and modeling, as well as subscale, full scale laboratory, rig and engine testing were utilized to evaluate and select concepts for further development. Program Requirements of: A 3 to 5 percentage point improvement in overall plant combined cycle efficiency when compared to the reference baseline plant; 20 to 30 percent reduction in overall plant capital cost when compared to the reference baseline plant; and NOx emissions of 2 PPM out of the stack. were all met. The program was completed on schedule and within the allotted budget

  7. Advanced transmission studies

    NASA Technical Reports Server (NTRS)

    Coy, John J.; Bill, Robert C.

    1988-01-01

    The NASA Lewis Research Center and the U.S. Army Aviation Systems Command share an interest in advancing the technology for helicopter propulsion systems. In particular, this paper presents highlights from that portion of the program in drive train technology and the related mechanical components. The major goals of the program are to increase the life, reliability, and maintainability; reduce the weight, noise, and vibration; and maintain the relatively high mechanical efficiency of the gear train. The current activity emphasizes noise reduction technology and analytical code development followed by experimental verification. Selected significant advances in technology for transmissions are reviewed, including advanced configurations and new analytical tools. Finally, the plan for future transmission research is presented.

  8. Advanced Aerodynamic Control Effectors

    NASA Technical Reports Server (NTRS)

    Wood, Richard M.; Bauer, Steven X. S.

    1999-01-01

    A 1990 research program that focused on the development of advanced aerodynamic control effectors (AACE) for military aircraft has been reviewed and summarized. Data are presented for advanced planform, flow control, and surface contouring technologies. The data show significant increases in lift, reductions in drag, and increased control power, compared to typical aerodynamic designs. The results presented also highlighted the importance of planform selection in the design of a control effector suite. Planform data showed that dramatic increases in lift (greater than 25%) can be achieved with multiple wings and a sawtooth forebody. Passive porosity and micro drag generator control effector data showed control power levels exceeding that available from typical effectors (moving surfaces). Application of an advanced planform to a tailless concept showed benefits of similar magnitude as those observed in the generic studies.

  9. Measurement and modeling of advanced coal conversion processes. Annual report, October 1990--September 1991

    SciTech Connect

    Solomon, P.R.; Serio, M.A.; Hamblen, D.G.; Smoot, L.D.; Brewster, B.S.

    1991-12-31

    The overall objective of this program is the development of predictive capability for the design, scale up, simulation, control and feedstock evaluation in advanced coal conversion devices. This program will merge significant advances made in measuring and quantitatively describing the mechanisms in coal conversion behavior. Comprehensive computer codes for mechanistic modeling of entrained-bed gasification. Additional capabilities in predicting pollutant formation will be implemented and the technology will be expanded to fixed-bed reactors.

  10. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Grady, Joseph E.; Halbig, Michael C.; Singh, Mrityunjay

    2015-01-01

    In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing," evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door, were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  11. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Grady, Joseph E.; Halbig, Michael C.; Singh, Mrityunjay

    2015-01-01

    In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing", evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  12. Chemotherapy advances in locally advanced head and neck cancer.

    PubMed

    Georges, Peter; Rajagopalan, Kumar; Leon, Chady; Singh, Priya; Ahmad, Nadir; Nader, Kamyar; Kubicek, Gregory J

    2014-12-10

    The management of locally advanced unresectable head and neck squamous cell cancer (HNSCC) continues to improve. One of the major advances in the treatment of HNSCC was the addition of chemotherapy to radiation in the treatment of non-surgical patients. The majority of the data regarding chemotherapy in HNSCC involve cisplatin chemotherapy with concurrent radiation. However, several new approaches have included targeted therapy against epidermal growth factor receptor and several recent studies have explored the role of induction chemotherapy in the treatment of HNSCC. The purpose of this article is to provide an overview of the role of chemotherapy in the treatment of locally advanced HNSCC. PMID:25493232

  13. Advanced Beamline Design for Fermilab's Advanced Superconducting Test Accelerator

    SciTech Connect

    Prokop, Christopher

    2014-01-01

    The Advanced Superconducting Test Accelerator (ASTA) at Fermilab is a new electron accelerator currently in the commissioning stage. In addition to testing superconducting accelerating cavities for future accelerators, it is foreseen to support a variety of Advanced Accelerator R&D (AARD) experiments. Producing the required electron bunches with the expected flexibility is challenging. The goal of this dissertation is to explore via numerical simulations new accelerator beamlines that can enable the advanced manipulation of electron bunches. The work especially includes the design of a low-energy bunch compressor and a study of transverse-to-longitudinal phase space exchangers.

  14. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing Part I: System Analysis, Component Identification, Additive Manufacturing, and Testing of Polymer Composites

    NASA Technical Reports Server (NTRS)

    Grady, Joseph E.; Haller, William J.; Poinsatte, Philip E.; Halbig, Michael C.; Schnulo, Sydney L.; Singh, Mrityunjay; Weir, Don; Wali, Natalie; Vinup, Michael; Jones, Michael G.; Patterson, Clark; Santelle, Tom; Mehl, Jeremy

    2015-01-01

    The research and development activities reported in this publication were carried out under NASA Aeronautics Research Institute (NARI) funded project entitled "A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing." The objective of the project was to conduct evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. The results of the activities are described in three part report. The first part of the report contains the data and analysis of engine system trade studies, which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. The technical scope of activities included an assessment of the feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composites, which were accomplished by fabricating prototype engine components and testing them in simulated engine operating conditions. The manufacturing process parameters were developed and optimized for polymer and ceramic composites (described in detail in the second and third part of the report). A number of prototype components (inlet guide vane (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included turbine nozzle components. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  15. Advanced phosphors

    DOEpatents

    Xiang, Xiao-Dong; Sun, Xiaodong; Schultz, Peter G.

    2000-01-01

    This invention relates to new phosphor materials and to combinatorial methods of synthesizing and detecting the same. In addition, methods of using phosphors to generate luminescence are also disclosed.

  16. Research Advances

    ERIC Educational Resources Information Center

    King, Angela G.

    2007-01-01

    Various new cell culture experiments for the development of microparticles are conducted. These studies have also led to the development of an anticancer egg, in addition to the analysis of various vegetable soup chemical reactions.

  17. Advanced turbine systems program

    SciTech Connect

    Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

    1992-01-01

    In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

  18. Advanced turbine systems program

    SciTech Connect

    Wilkes, C.; Mukavetz, D.W.; Knickerbocker, T.K.; Ali, S.A.

    1992-12-31

    In accordance with the goals of the DOE program, improvements in the gas turbine are the primary focus of Allison activity during Phase I. To this end Allison conducted a survey of potentially applicable gas turbine cycles and selected the advanced combined cycle as reference system. Extensive analysis of two versions of the advanced combined cycle was performed against the requirement for a 60% thermal efficiency (LHV) utility-sized, natural gas fired system. This analysis resulted in technology requirements for this system. Additional analysis determined emissions potential for the system, established a coal-fueled derivative system and a commercialization plan. This report deals with the technical requirements for a system that meets the thermal efficiency goal. Allison initially investigated four basic thermodynamic cycles: Humid air turbine, intercalate-recuperated systems, advanced combined cycle, chemically recuperated cycle. Our survey and cycle analysis indicated that au had the potential of reaching 60% thermal efficiency. We also concluded that engine hot section technology would be a critical technology regardless of which cycle was chosen. Based on this result Allison chose to concentrate on the advanced combined cycle. This cycle is well known and understood by the utility turbine user community and is therefore likely to be acceptable to users.

  19. 31 CFR 561.328 - Reduce significantly, significantly reduced, and significant reduction.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Reduce significantly, significantly reduced, and significant reduction. 561.328 Section 561.328 Money and Finance: Treasury Regulations... IRANIAN FINANCIAL SANCTIONS REGULATIONS General Definitions § 561.328 Reduce significantly,...

  20. 31 CFR 561.328 - Reduce significantly, significantly reduced, and significant reduction.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Reduce significantly, significantly reduced, and significant reduction. 561.328 Section 561.328 Money and Finance: Treasury Regulations... IRANIAN FINANCIAL SANCTIONS REGULATIONS General Definitions § 561.328 Reduce significantly,...

  1. "Clinical" Significance: "Clinical" Significance and "Practical" Significance are NOT the Same Things

    ERIC Educational Resources Information Center

    Peterson, Lisa S.

    2008-01-01

    Clinical significance is an important concept in research, particularly in education and the social sciences. The present article first compares clinical significance to other measures of "significance" in statistics. The major methods used to determine clinical significance are explained and the strengths and weaknesses of clinical significance…

  2. Advanced life support study

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Summary reports on each of the eight tasks undertaken by this contract are given. Discussed here is an evaluation of a Closed Ecological Life Support System (CELSS), including modeling and analysis of Physical/Chemical Closed Loop Life Support (P/C CLLS); the Environmental Control and Life Support Systems (ECLSS) evolution - Intermodule Ventilation study; advanced technologies interface requirements relative to ECLSS; an ECLSS resupply analysis; the ECLSS module addition relocation systems engineering analysis; an ECLSS cost/benefit analysis to identify rack-level interface requirements of the alternate technologies evaluated in the ventilation study, with a comparison of these with the rack level interface requirements for the baseline technologies; advanced instrumentation - technology database enhancement; and a clean room survey and assessment of various ECLSS evaluation options for different growth scenarios.

  3. Epilepsy: new advances.

    PubMed

    Moshé, Solomon L; Perucca, Emilio; Ryvlin, Philippe; Tomson, Torbjörn

    2015-03-01

    Epilepsy affects 65 million people worldwide and entails a major burden in seizure-related disability, mortality, comorbidities, stigma, and costs. In the past decade, important advances have been made in the understanding of the pathophysiological mechanisms of the disease and factors affecting its prognosis. These advances have translated into new conceptual and operational definitions of epilepsy in addition to revised criteria and terminology for its diagnosis and classification. Although the number of available antiepileptic drugs has increased substantially during the past 20 years, about a third of patients remain resistant to medical treatment. Despite improved effectiveness of surgical procedures, with more than half of operated patients achieving long-term freedom from seizures, epilepsy surgery is still done in a small subset of drug-resistant patients. The lives of most people with epilepsy continue to be adversely affected by gaps in knowledge, diagnosis, treatment, advocacy, education, legislation, and research. Concerted actions to address these challenges are urgently needed. PMID:25260236

  4. Advanced Pacemaker

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Synchrony, developed by St. Jude Medical's Cardiac Rhythm Management Division (formerly known as Pacesetter Systems, Inc.) is an advanced state-of-the-art implantable pacemaker that closely matches the natural rhythm of the heart. The companion element of the Synchrony Pacemaker System is the Programmer Analyzer APS-II which allows a doctor to reprogram and fine tune the pacemaker to each user's special requirements without surgery. The two-way communications capability that allows the physician to instruct and query the pacemaker is accomplished by bidirectional telemetry. APS-II features 28 pacing functions and thousands of programming combinations to accommodate diverse lifestyles. Microprocessor unit also records and stores pertinent patient data up to a year.

  5. Substrate-assisted catalysis: molecular basis and biological significance.

    PubMed Central

    Dall'Acqua, W.; Carter, P.

    2000-01-01

    Substrate-assisted catalysis (SAC) is the process by which a functional group in a substrate contributes to catalysis by an enzyme. SAC has been demonstrated for representatives of three major enzyme classes: serine proteases, GTPases, and type II restriction endonucleases, as well as lysozyme and hexose-1-phosphate uridylyltransferase. Moreover, structure-based predictions of SAC have been made for many additional enzymes. Examples of SAC include both naturally occurring enzymes such as type II restriction endonucleases as well as engineered enzymes including serine proteases. In the latter case, a functional group from a substrate can substitute for a catalytic residue replaced by site-directed mutagenesis. From a protein engineering perspective, SAC provides a strategy for drastically changing enzyme substrate specificity or even the reaction catalyzed. From a biological viewpoint, SAC contributes significantly to the activity of some enzymes and may represent a functional intermediate in the evolution of catalysis. This review focuses on advances in engineering enzyme specificity and activity by SAC, together with the biological significance of this phenomenon. PMID:10739241

  6. Significant improvements in long trace profiler measurement performance

    SciTech Connect

    Takacs, P.Z.; Bresloff, C.J.

    1996-07-01

    A Modifications made to the Long Trace Profiler (LTP II) system at the Advanced Photon Source at Argonne National Laboratory have significantly improved the accuracy and repeatability of the instrument The use of a Dove prism in the reference beam path corrects for phasing problems between mechanical efforts and thermally-induced system errors. A single reference correction now completely removes both error signals from the measured surface profile. The addition of a precision air conditioner keeps the temperature in the metrology enclosure constant to within {+-}0.1{degrees}C over a 24 hour period and has significantly improved the stability and repeatability of the system. We illustrate the performance improvements with several sets of measurements. The improved environmental control has reduced thermal drift error to about 0.75 microradian RMS over a 7.5 hour time period. Measurements made in the forward scan direction and the reverse scan direction differ by only about 0.5 microradian RMS over a 500mm, trace length. We are now able to put 1-sigma error bar of 0.3 microradian on an average of 10 slope profile measurements over a 500mm long trace length, and we are now able to put a 0.2 microradian error bar on an average of 10 measurements over a 200mm trace length. The corresponding 1-sigma height error bar for this measurement is 1.1 run.

  7. Prognostic significance of Tspan9 in gastric cancer

    PubMed Central

    Feng, Tongtong; Sun, Libin; Qi, Weiwei; Pan, Fei; Lv, Jing; Guo, Jing; Zhao, Shufen; Ding, Aiping; Qiu, Wensheng

    2016-01-01

    Tetraspanins are a large superfamily of glycoproteins, which are engaged in a wide range of specific molecular interactions by forming tetraspanin-enriched microdomains. Tetraspanin 9 (Tspan9) is a previously poorly studied tetraspanin gene, which was predominantly identified as an amplified gene in serous Fallopian tube carcinoma. However, the expression and role of Tspan9 in gastric cancer have yet to be fully elucidated. The aim of the present study was to evaluate the expression and clinical significance of Tspan9 in gastric cancer. In the present study, 105 gastric cancer tissue samples and corresponding adjacent normal samples were detected for Tspan9 expression using immunohistochemistry; furthermore, the association between clinical characteristics and Tspan9 expression was also analyzed. Tspan9 expression was determined to be significantly lower in cancer samples compared with those in corresponding adjacent normal samples (P<0.001). However, its increased levels of expression in cancer samples appeared to demonstrate a poorer prognostic tendency, which is associated with deeper tumor depth (P=0.025), more nodal involvement (P=0.01), more advanced tumor/lymph node/metastasis (TNM) stages (P=0.017) and a larger tumor size (P=0.026). Additionally, multivariate analysis demonstrated that high expression of Tspan9 was an independent prognostic factor for poor overall survival (P<0.01). These results suggested that Tspan9 may be used as a potential prognostic factor in gastric cancer.

  8. Significant improvements in Long Trace Profiler measurement performance

    SciTech Connect

    Takacs, P.Z.; Bresloff, C.J.

    1996-12-31

    Modifications made to the Long Trace Profiler (LTP II) system at the Advanced Photon Source at Argonne National Laboratory have significantly improved the accuracy and repeatability of the instrument. The use of a Dove prism in the reference beam path corrects for phasing problems between mechanical errors and thermally-induced system errors. A single reference correction now completely removes both error signals from the measured surface profile. The addition of a precision air conditioner keeps the temperature in the metrology enclosure constant to within {+-} 0.1 C over a 24 hour period and has significantly improved the stability and repeatability of the system. The authors illustrate the performance improvements with several sets of measurements. The improved environmental control has reduced thermal drift error to about 0.75 microradian RMS over a 7.5 hour time period. Measurements made in the forward scan direction and the reverse scan direction differ by only about 0.5 microradian RMS over a 500 mm trace length. They are now able to put 1-sigma error bar of 0.3 microradian on an average of 10 slope profile measurements over a 500 mm long trace length, and they are now able to put a 0.2 microradian error bar on an average of 10 measurements over a 200 mm trace length. The corresponding 1-sigma height error bar for this measurement is 1.1 nm.

  9. 31 CFR 561.404 - Significant transaction or transactions; significant financial services; significant financial...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Significant transaction or transactions; significant financial services; significant financial transaction. 561.404 Section 561.404 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY...

  10. Application of advanced technologies to small, short-haul aircraft

    NASA Technical Reports Server (NTRS)

    Andrews, D. G.; Brubaker, P. W.; Bryant, S. L.; Clay, C. W.; Giridharadas, B.; Hamamoto, M.; Kelly, T. J.; Proctor, D. K.; Myron, C. E.; Sullivan, R. L.

    1978-01-01

    The results of a preliminary design study which investigates the use of selected advanced technologies to achieve low cost design for small (50-passenger), short haul (50 to 1000 mile) transports are reported. The largest single item in the cost of manufacturing an airplane of this type is labor. A careful examination of advanced technology to airframe structure was performed since one of the most labor-intensive parts of the airplane is structures. Also, preliminary investigation of advanced aerodynamics flight controls, ride control and gust load alleviation systems, aircraft systems and turbo-prop propulsion systems was performed. The most beneficial advanced technology examined was bonded aluminum primary structure. The use of this structure in large wing panels and body sections resulted in a greatly reduced number of parts and fasteners and therefore, labor hours. The resultant cost of assembled airplane structure was reduced by 40% and the total airplane manufacturing cost by 16% - a major cost reduction. With further development, test verification and optimization appreciable weight saving is also achievable. Other advanced technology items which showed significant gains are as follows: (1) advanced turboprop-reduced block fuel by 15.30% depending on range; (2) configuration revisions (vee-tail)-empennage cost reduction of 25%; (3) leading-edge flap addition-weight reduction of 2500 pounds.

  11. Benefits from synergies and advanced technologies for an advanced-technology space station

    NASA Astrophysics Data System (ADS)

    Garrett, L. Bernard; Ferebee, Melvin J., Jr.; Queijo, Manuel J.; Butterfield, Ansel J.

    1991-04-01

    A configuration for a second-generation advanced technology space station has been defined in a series of NASA-sponsored studies. Definitions of subsystems specifically addressed opportunities for beneficial synergistic interactions and those potential synergies and their benefits are identified. One of the more significant synergistic benefits involves the multi-function utilization of water within a large system that generates artificial gravity by rotation. In such a system, water not only provides the necessary crew life support, but also serves as counterrotator mass, as moveable ballast, and as a source for propellant gases. Additionally, the synergistic effects between advanced technology materials, operation at reduced artificial gravity, and lower cabin atmospheric pressure levels show beneficial interactions that can be quantified in terms of reduced mass to orbit.

  12. Benefits from synergies and advanced technologies for an advanced-technology space station

    NASA Technical Reports Server (NTRS)

    Garrett, L. Bernard; Ferebee, Melvin J., Jr.; Queijo, Manuel J.; Butterfield, Ansel J.

    1991-01-01

    A configuration for a second-generation advanced technology space station has been defined in a series of NASA-sponsored studies. Definitions of subsystems specifically addressed opportunities for beneficial synergistic interactions and those potential synergies and their benefits are identified. One of the more significant synergistic benefits involves the multi-function utilization of water within a large system that generates artificial gravity by rotation. In such a system, water not only provides the necessary crew life support, but also serves as counterrotator mass, as moveable ballast, and as a source for propellant gases. Additionally, the synergistic effects between advanced technology materials, operation at reduced artificial gravity, and lower cabin atmospheric pressure levels show beneficial interactions that can be quantified in terms of reduced mass to orbit.

  13. Low NOx Advanced Vortex Combustor

    SciTech Connect

    Edmonds, R.G.; Williams, J.T.; Steele, R.C.; Straub, D.L.; Casleton, K.H.; Bining, Avtar

    2008-05-01

    A lean-premixed advanced vortex combustor (AVC) has been developed and tested. The natural gas fueled AVC was tested at the U.S. Department of Energy’s National Energy Technology Laboratory in Morgantown, WV. All testing was performed at elevated pressures and inlet temperatures and at lean fuel-air ratios representative of industrial gas turbines. The improved AVC design exhibited simultaneous NOx /CO/unburned hydrocarbon (UHC) emissions of 4/4/0 ppmv (all emissions corrected to 15% O2 dry). The design also achieved less than 3 ppmv NOx with combustion efficiencies in excess of 99.5%. The design demonstrated marked acoustic dynamic stability over a wide range of operating conditions, which potentially makes this approach significantly more attractive than other lean-premixed combustion approaches. In addition, the measured 1.75% pressure drop is significantly lower than conventional gas turbine combustors, which could translate into an overall gas turbine cycle efficiency improvement. The relatively high velocities and low pressure drop achievable with this technology make the AVC approach an attractive alternative for syngas fuel applications.

  14. Recent advances in tropical medicine.

    PubMed

    Solomon, Anthony W; Nayagam, Shevanthi; Pasvol, Geoffrey

    2009-07-01

    There have been significant advances in both the classical and neglected tropical diseases, with Guinea worm looking set to be the next disease after smallpox to be eradicated. Aided by a combination of enhanced understanding of the biology of the pathogens, intensification of immunisation activities or mass drug administration, together with the development of synergies with control programmes for co-endemic tropical diseases, polio, lymphatic filariasis, trachoma and onchocerciasis all appear to be in global decline, with good prospects for eventual successful elimination. While the global incidence of new cases of leprosy continues to decrease, the focus of leprosy control efforts has shifted following more widespread recognition that cure of infection does not necessarily prevent disability. Expansion in funding for HIV/AIDS and malaria provides some grounds for optimism about the control of these diseases. However, ongoing education and access remain essential to increasing the uptake of HIV testing and decreasing transmission. Meanwhile, the rise of drug-resistant tuberculosis and malaria is concerning, and the emergence of the highly pathogenic avian influenza A and re-emergence of viruses such as chikungunya and West Nile virus, without significant recent progress in vaccine development, pose additional ongoing challenges to tropical medicine physicians worldwide. PMID:19233443

  15. A Multi-Year Analysis of Asian Gender Differences on Advanced Placement Exams

    ERIC Educational Resources Information Center

    Moore, George; Slate, John R.

    2011-01-01

    The performance of Asian boys and girls on Advanced Placement (AP) exam overall scores across the United States for the past 14 years was analyzed. For each of the 14 years of data analyzed, Asian boys had statistically significant higher percentages of overall AP exam scores of 5 than did Asian girls. In addition, the gap between the mean…

  16. Nitrogen as a friendly addition to steel

    SciTech Connect

    Rawers, J.C.

    2006-01-01

    Interstitial alloying with nitrogen or carbon is a common means of enhancing properties of iron-based alloys. Interstitial nitrogen addition to fcc-phase Fe-Cr-Mn/Ni alloys results in improved mechanical properties, whereas addition of carbon can result in the formation of unwanted carbides. Carbon addition to low alloy, bcc-phase iron alloys significantly improves strength through the formation of carbides, whereas addition of nitrogen in bcc-phase iron alloys can result in porous casting and reduced mechanical properties. This study will show that alloying iron-based alloys with both nitrogen and carbon can produce positive results. Nitrogen addition to Fe-C and Fe-Cr-C alloys, and both nitrogen and nitrogen-carbon additions to Fe-Cr-Mn/Ni alloys altered the microstructure, improved mechanical properties, increased hardness, and reduced wear by stabilizing the fcc-phase and altering (possibly eliminating) precipitate formation.

  17. [Advance in imaging spectropolarimeter].

    PubMed

    Wang, Xin-quan; Xiangli, Bin; Huang, Min; Hu, Liang; Zhou, Jin-song; Jing, Juan-juan

    2011-07-01

    Imaging spectropolarimeter (ISP) is a type of novel photoelectric sensor which integrated the functions of imaging, spectrometry and polarimetry. In the present paper, the concept of the ISP is introduced, and the advances in ISP at home and abroad in recent years is reviewed. The principles of ISPs based on novel devices, such as acousto-optic tunable filter (AOTF) and liquid crystal tunable filter (LCTF), are illustrated. In addition, the principles of ISPs developed by adding polarized components to the dispersing-type imaging spectrometer, spatially modulated Fourier transform imaging spectrometer, and computer tomography imaging spectrometer are introduced. Moreover, the trends of ISP are discussed too. PMID:21942063

  18. Mandibular Advancement Splints.

    PubMed

    Bamagoos, Ahmad A; Sutherland, Kate; Cistulli, Peter A

    2016-09-01

    Although mandibular advancement splints (MAS) are not as efficacious as continuous positive airway pressure (CPAP) in reducing obstructive respiratory events, patient adherence and preference are greater than CPAP. Additionally, the effectiveness of both treatments on general health outcomes, cognitive function, and quality of life appears to be equivalent. The main barrier for the implementation of MAS treatment in clinical practice is the interindividual variability in response to MAS treatment. Several prediction tools have been proposed to enhance patient selection for MAS treatment. Phenotyping obstructive sleep apnea patients may reveal patient characteristics that enable the prediction of response to MAS treatment. PMID:27542880

  19. Future advances.

    PubMed

    Celesia, Gastone G; Hickok, Gregory

    2015-01-01

    Future advances in the auditory systems are difficult to predict, and only educated guesses are possible. It is expected that innovative technologies in the field of neuroscience will be applied to the auditory system. Optogenetics, Brainbow, and CLARITY will improve our knowledge of the working of neural auditory networks and the relationship between sound and language, providing a dynamic picture of the brain in action. CLARITY makes brain tissue transparent and offers a three-dimensional view of neural networks, which, combined with genetically labeling neurons with multiple, distinct colors (Optogenetics), will provide detailed information of the complex brain system. Molecular functional magnetic resonance imaging (MRI) will allow the study of neurotransmitters detectable by MRI and their function in the auditory pathways. The Human Connectome project will study the patterns of distributed brain activity that underlie virtually all aspects of cognition and behavior and determine if abnormalities in the distributed patterns of activity may result in hearing and behavior disorders. Similarly, the programs of Big Brain and ENIGMA will improve our understanding of auditory disorders. New stem-cell therapy and gene therapies therapy may bring about a partial restoration of hearing for impaired patients by inducing regeneration of cochlear hair cells. PMID:25726297

  20. Predicting Epileptic Seizures in Advance

    PubMed Central

    Moghim, Negin; Corne, David W.

    2014-01-01

    Epilepsy is the second most common neurological disorder, affecting 0.6–0.8% of the world's population. In this neurological disorder, abnormal activity of the brain causes seizures, the nature of which tend to be sudden. Antiepileptic Drugs (AEDs) are used as long-term therapeutic solutions that control the condition. Of those treated with AEDs, 35% become resistant to medication. The unpredictable nature of seizures poses risks for the individual with epilepsy. It is clearly desirable to find more effective ways of preventing seizures for such patients. The automatic detection of oncoming seizures, before their actual onset, can facilitate timely intervention and hence minimize these risks. In addition, advance prediction of seizures can enrich our understanding of the epileptic brain. In this study, drawing on the body of work behind automatic seizure detection and prediction from digitised Invasive Electroencephalography (EEG) data, a prediction algorithm, ASPPR (Advance Seizure Prediction via Pre-ictal Relabeling), is described. ASPPR facilitates the learning of predictive models targeted at recognizing patterns in EEG activity that are in a specific time window in advance of a seizure. It then exploits advanced machine learning coupled with the design and selection of appropriate features from EEG signals. Results, from evaluating ASPPR independently on 21 different patients, suggest that seizures for many patients can be predicted up to 20 minutes in advance of their onset. Compared to benchmark performance represented by a mean S1-Score (harmonic mean of Sensitivity and Specificity) of 90.6% for predicting seizure onset between 0 and 5 minutes in advance, ASPPR achieves mean S1-Scores of: 96.30% for prediction between 1 and 6 minutes in advance, 96.13% for prediction between 8 and 13 minutes in advance, 94.5% for prediction between 14 and 19 minutes in advance, and 94.2% for prediction between 20 and 25 minutes in advance. PMID:24911316

  1. Advanced ground station architecture

    NASA Technical Reports Server (NTRS)

    Zillig, David; Benjamin, Ted

    1994-01-01

    This paper describes a new station architecture for NASA's Ground Network (GN). The architecture makes efficient use of emerging technologies to provide dramatic reductions in size, operational complexity, and operational and maintenance costs. The architecture, which is based on recent receiver work sponsored by the Office of Space Communications Advanced Systems Program, allows integration of both GN and Space Network (SN) modes of operation in the same electronics system. It is highly configurable through software and the use of charged coupled device (CCD) technology to provide a wide range of operating modes. Moreover, it affords modularity of features which are optional depending on the application. The resulting system incorporates advanced RF, digital, and remote control technology capable of introducing significant operational, performance, and cost benefits to a variety of NASA communications and tracking applications.

  2. Advanced Virgo: AN Update

    NASA Astrophysics Data System (ADS)

    Fafone, Viviana

    2015-01-01

    Significant progress has been made in recent years on the development of gravitational wave detectors. Several km-scale interferometers have already operated at interesting sensitivity levels. In particular, the interferometric detector for gravitational waves Virgo completed its fourth science run in August 2011, when the upgrade toward the second-generation detector Advanced Virgo started. This major upgrade is planned to be completed by 2015. The expected final sensitivity of Advanced Virgo is about ten times better than the sensitivity reached by its predecessor. Many of the components of the detector will be changed to meet this goal, including new core optics, a more powerful laser, an improved vacuum system, the implementation of the signal-recycling technique. In this paper the description of the project and the expected schedule are presented.

  3. Advanced Ablative TPS

    NASA Technical Reports Server (NTRS)

    Gasch, Matthew J.

    2011-01-01

    Early NASA missions (Gemini, Apollo, Mars Viking) employed new ablative TPS that were tailored for the entry environment. After 40 years, heritage ablative TPS materials using Viking or Pathfinder era materials are at or near their performance limits and will be inadequate for future exploration missions. Significant advances in TPS materials technology are needed in order to enable any subsequent human exploration missions beyond Low Earth Orbit. This poster summarizes some recent progress at NASA in developing families of advanced rigid/conformable and flexible ablators that could potentially be used for thermal protection in planetary entry missions. In particular the effort focuses technologies required to land heavy (approx.40 metric ton) masses on Mars to facilitate future exploration plans.

  4. Advanced information society(5)

    NASA Astrophysics Data System (ADS)

    Tanizawa, Ippei

    Based on the advancement of information network technology information communication forms informationalized society giving significant impact on business activities and life style in it. The information network has been backed up technologically by development of computer technology and has got great contribution by enhanced computer technology and communication equipments. Information is transferred by digital and analog methods. Technical development which has brought out multifunctioned modems of communication equipments in analog mode, and construction of advanced information communication network which has come out by joint work of computer and communication under digital technique, are described. The trend in institutional matter and standardization of electrical communication is also described showing some examples of value-added network (VAN).

  5. Advanced Learning

    ERIC Educational Resources Information Center

    Hijon-Neira, Raquel, Ed.

    2009-01-01

    The education industry has obviously been influenced by the Internet revolution. Teaching and learning methods have changed significantly since the coming of the Web and it is very likely they will keep evolving many years to come thanks to it. A good example of this changing reality is the spectacular development of e-Learning. In a more…

  6. SIGNIFICANT NATURAL HERITAGE AREAS (NC)

    EPA Science Inventory

    The North Carolina Department of Environment and Natural Resources, Division of Parks and Recreation, Natural Heritage Program in cooperation with the NC Center for Geographic Information & Analysis, developed the Significant Natural Heritage Areas digital data to determine the a...

  7. Significant Decisions in Labor Cases.

    ERIC Educational Resources Information Center

    Monthly Labor Review, 1979

    1979-01-01

    Several significant court decisions involving labor cases are discussed including a series of decisions concerning constitutional protections afforded aliens; the First Amendment and national labor relations laws; and the bifurcated backpay rule. (BM)

  8. Astronomical Significance of Ancient Monuments

    NASA Astrophysics Data System (ADS)

    Simonia, I.

    2011-06-01

    Astronomical significance of Gokhnari megalithic monument (eastern Georgia) is considered. Possible connection of Amirani ancient legend with Gokhnari monument is discussed. Concepts of starry practicality and solar stations are proposed.

  9. Statistical Significance vs. Practical Significance: An Exploration through Health Education

    ERIC Educational Resources Information Center

    Rosen, Brittany L.; DeMaria, Andrea L.

    2012-01-01

    The purpose of this paper is to examine the differences between statistical and practical significance, including strengths and criticisms of both methods, as well as provide information surrounding the application of various effect sizes and confidence intervals within health education research. Provided are recommendations, explanations and…

  10. Advanced gastric cancer: Current treatment landscape and future perspectives

    PubMed Central

    Digklia, Antonia; Wagner, Anna Dorothea

    2016-01-01

    Gastric cancer currently ranks fourth in cancer-related mortality worldwide. In the western world, it is most often diagnosed at an advanced stage, after becoming metastatic at distant sites. Patients with advanced disease (locally advanced or metastatic) have a somber prognosis, with a median overall survival of 10-12 mo, and palliative chemotherapy is the mainstay of treatment. In recent years, novel approaches using inhibition of human epidermal growth factor receptor 2 (HER2) have demonstrated significant improvements in progression-free and overall survival, compared with chemotherapy alone, in first-line treatment of patients with overexpression of HER2. In addition, both second-line chemotherapy and treatment with the vascular endothelial growth factor receptor-inhibitor ramucirumab demonstrated significant benefits in terms of overall survival, compared with best supportive care, in randomized studies. Moreover, ramucirumab in combination with chemotherapy demonstrated further significant benefits in terms of progression-free and overall survival, compared with chemotherapy alone, in second-line treatment for patients with metastatic gastric cancer. A recently published molecular classification of gastric cancer is expected to improve patient stratification and selection for clinical trials and provide a roadmap for future drug development. Nevertheless, despite these developments the prognosis of patients with advanced gastric cancer remains poor. In this review we discuss current standards of care and outline major topics of drug development in gastric cancer. PMID:26937129

  11. Advanced geothermal technologies

    SciTech Connect

    Whetten, J.T.; Murphy, H.D.; Hanold, R.J.; Myers, C.W.; Dunn, J.C.

    1988-01-01

    Research and development in advanced technologies for geothermal energy production continue to increase the energy production options for the Nation. The high-risk investment over the past few years by the US Department of Energy in geopressured, hot dry rock, and magma energy resources is producing new means to lower production costs and to take advantage of these resources. The Nation has far larger and more regionally extensive geothermal resources than heretofore realized. At the end of a short 30-day closed-loop flow test, the manmade hot dry rock reservoir at Fenton Hill, New Mexico, was producing 10 MW thermal - and still climbing - proving the technical feasibility of this new technology. The scientific feasibility of magma energy extraction has been demonstrated, and new field tests to evaluate this technology are planned. Analysis and field tests confirm the viability of geopressured-geothermal energy and the prospect that many dry-hole or depleted petroleum wells can be turned into producing geopressured-geothermal wells. Technological advances achieved through hot dry rock, magma, geopressured, and other geothermal research are making these resources and conventional hydrothermal resources more competitive. Noteworthy among these technological advances are techniques in computer simulation of geothermal reservoirs, new means for well stimulation, new high-temperature logging tools and packers, new hard-rock penetration techniques, and new methods for mapping fracture flow paths across large underground areas in reservoirs. In addition, many of these same technological advances can be applied by the petroleum industry to help lower production costs in domestic oil and gas fields. 5 refs., 4 figs.

  12. Testing for Additivity at Select Mixture Groups of Interest Based on Statistical Equivalence Testing Methods

    SciTech Connect

    Stork, LeAnna M.; Gennings, Chris; Carchman, Richard; Carter, Jr., Walter H.; Pounds, Joel G.; Mumtaz, Moiz

    2006-12-01

    Several assumptions, defined and undefined, are used in the toxicity assessment of chemical mixtures. In scientific practice mixture components in the low-dose region, particularly subthreshold doses, are often assumed to behave additively (i.e., zero interaction) based on heuristic arguments. This assumption has important implications in the practice of risk assessment, but has not been experimentally tested. We have developed methodology to test for additivity in the sense of Berenbaum (Advances in Cancer Research, 1981), based on the statistical equivalence testing literature where the null hypothesis of interaction is rejected for the alternative hypothesis of additivity when data support the claim. The implication of this approach is that conclusions of additivity are made with a false positive rate controlled by the experimenter. The claim of additivity is based on prespecified additivity margins, which are chosen using expert biological judgment such that small deviations from additivity, which are not considered to be biologically important, are not statistically significant. This approach is in contrast to the usual hypothesis-testing framework that assumes additivity in the null hypothesis and rejects when there is significant evidence of interaction. In this scenario, failure to reject may be due to lack of statistical power making the claim of additivity problematic. The proposed method is illustrated in a mixture of five organophosphorus pesticides that were experimentally evaluated alone and at relevant mixing ratios. Motor activity was assessed in adult male rats following acute exposure. Four low-dose mixture groups were evaluated. Evidence of additivity is found in three of the four low-dose mixture groups.The proposed method tests for additivity of the whole mixture and does not take into account subset interactions (e.g., synergistic, antagonistic) that may have occurred and cancelled each other out.

  13. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  14. Advances in Schoolwide Inclusive School Reform

    ERIC Educational Resources Information Center

    Sailor, Wayne

    2015-01-01

    This article highlights three significant advances in schoolwide inclusive school reform and suggests three next steps to improve educational outcomes for "all" students, particularly for students for whom typical instruction is not effective. Significant advances are as follows: (a) a multi-tiered system of support (MTSS) with embedded…

  15. Clinical significance of human papillomavirus genotyping

    PubMed Central

    Choi, Youn Jin

    2016-01-01

    Cervical cancer is the fourth most common cancer in women worldwide, and the human papillomavirus (HPV) is the main causative agent for its development. HPV is a heterogeneous virus, and a persistent infection with a high-risk HPV contributes to the development of cancer. In recent decades, great advances have been made in understanding the molecular biology of HPV, and HPV’s significance in cervical cancer prevention and management has received increased attention. In this review, we discuss the role of HPV genotyping in cervical cancer by addressing: clinically important issues in HPV virology; the current application of HPV genotyping in clinical medicine; and potential future uses for HPV genotyping. PMID:26768784

  16. Deciphering the roles of multiple additives in organocatalyzed Michael additions.

    PubMed

    Günler, Z Inci; Companyó, Xavier; Alfonso, Ignacio; Burés, Jordi; Jimeno, Ciril; Pericàs, Miquel A

    2016-05-21

    The synergistic effects of multiple additives (water and acetic acid) on the asymmetric Michael addition of acetone to nitrostyrene catalyzed by primary amine-thioureas (PAT) were precisely determined. Acetic acid facilitates hydrolysis of the imine intermediates, thus leading to catalytic behavior, and minimizes the formation of the double addition side product. In contrast, water slows down the reaction but minimizes catalyst deactivation, eventually leading to higher final yields. PMID:27128165

  17. Effect of glutathione addition in sparkling wine.

    PubMed

    Webber, Vanessa; Dutra, Sandra Valduga; Spinelli, Fernanda Rodrigues; Marcon, Ângela Rossi; Carnieli, Gilberto João; Vanderlinde, Regina

    2014-09-15

    This study aims to evaluate the effect of the addition of glutathione (GSH) on secondary aromas and on the phenolic compounds of sparkling wine elaborated by traditional method. It was added 10 and 20 mg L(-1) of GSH to must and to base wine. The determination of aroma compounds was performed by gas chromatography. Phenolic compounds and glutathione content were analyzed by high performance liquid chromatography. Sparkling wines with addition of GSH to must showed lower levels of total phenolic compounds and hydroxycinnamic acids. Furthermore, the sparkling wine with addition of GSH to must showed higher levels of 2-phenylethanol, 3-methyl-1-butanol and diethyl succinate, and lower concentrations of ethyl decanoate, octanoic and decanoic acids. The GSH addition to the must show a greater influence on sparkling wine than to base wine, however GSH addition to base wine seems retain higher SO2 free levels. The concentration of GSH added showed no significant difference. PMID:24767072

  18. Significant results: statistical or clinical?

    PubMed Central

    2016-01-01

    The null hypothesis significance test method is popular in biological and medical research. Many researchers have used this method for their research without exact knowledge, though it has both merits and shortcomings. Readers will know its shortcomings, as well as several complementary or alternative methods, as such the estimated effect size and the confidence interval. PMID:27066201

  19. The Most Significant Educational Research

    ERIC Educational Resources Information Center

    Griffiths, Daniel E.

    1972-01-01

    A reexamination of the significant research done in the decade from 1956-1966 and a revision of this list to include work up to 1971. Human characteristics, equality of educational opportunity, development of the individual, nature of intelligence, methodology of educational research, and principles of learning are some of the areas covered. (RB)

  20. MSFC's Advanced Space Propulsion Formulation Task

    NASA Technical Reports Server (NTRS)

    Huebner, Lawrence D.; Gerrish, Harold P.; Robinson, Joel W.; Taylor, Terry L.

    2012-01-01

    In NASA s Fiscal Year 2012, a small project was undertaken to provide additional substance, depth, and activity knowledge to the technology areas identified in the In-Space Propulsion Systems Roadmap, Technology Area 02 (TA-02), as created under the auspices of the NASA Office of the Chief Technologist (OCT). This roadmap was divided into four basic groups: (1) Chemical Propulsion, (2) Non-chemical Propulsion, (3) Advanced (TRL<3) Propulsion Technologies, and (4) Supporting Technologies. The first two were grouped according to the governing physics. The third group captured technologies and physic concepts that are at a lower TRL level. The fourth group identified pertinent technical areas that are strongly coupled with these related areas which could allow significant improvements in performance. There were a total of 45 technologies identified in TA-02, and 25 of these were studied in this formulation task. The goal of this task was to provide OCT with a knowledge-base for decisionmaking on advanced space propulsion technologies and not waste money by unintentionally repeating past projects or funding the technologies with minor impacts. This formulation task developed the next level of detail for technologies described and provides context to OCT where investments should be made. The presentation will begin with the list of technologies from TA-02, how they were prioritized for this study, and details on what additional data was captured for the technologies studied. Following this, some samples of the documentation will be provided, followed by plans on how the data will be made accessible.

  1. Advanced gearbox technology

    NASA Technical Reports Server (NTRS)

    Anderson, N. E.; Cedoz, R. W.; Salama, E. E.; Wagner, D. A.

    1987-01-01

    An advanced 13,000 HP, counterrotating (CR) gearbox was designed and successfully tested to provide a technology base for future designs of geared propfan propulsion systems for both commercial and military aircraft. The advanced technology CR gearbox was designed for high efficiency, low weight, long life, and improved maintainability. The differential planetary CR gearbox features double helical gears, double row cylindrical roller bearings integral with planet gears, tapered roller prop support bearings, and a flexible ring gear and diaphragm to provide load sharing. A new Allison propfan back-to-back gearbox test facility was constructed. Extensive rotating and stationary instrumentation was used to measure temperature, strain, vibration, deflection and efficiency under representative flight operating conditions. The tests verified smooth, efficient gearbox operation. The highly-instrumented advanced CR gearbox was successfully tested to design speed and power (13,000 HP), and to a 115 percent overspeed condition. Measured CR gearbox efficiency was 99.3 percent at the design point based on heat loss to the oil. Tests demonstrated low vibration characteristics of double helical gearing, proper gear tooth load sharing, low stress levels, and the high load capacity of the prop tapered roller bearings. Applied external prop loads did not significantly affect gearbox temperature, vibration, or stress levels. Gearbox hardware was in excellent condition after the tests with no indication of distress.

  2. Advanced communications satellite systems

    NASA Technical Reports Server (NTRS)

    Sivo, J. N.

    1983-01-01

    There is a rapidly growing demand for satellite circuits, particularly for domestic service within the U.S. NASA's current program is aimed at developing the high risk, advanced satellite communications technologies required to significantly increase the capacity of future satellite communications systems. Attention is given to aspects of traffic distribution and service scenario, problems related to effects of rain attenuation, details regarding system configuration, a 30/20 GHz technology development approach, an experimental flight system, the communications payload for the experimental flight system, a typical experiment flight system coverage, and a typical three axis stabilized flight spacecraft.

  3. Advances in dental materials.

    PubMed

    Vaderhobli, Ram M

    2011-07-01

    The use of materials to rehabilitate tooth structures is constantly changing. Over the past decade, newer material processing techniques and technologies have significantly improved the dependability and predictability of dental material for clinicians. The greatest obstacle, however, is in choosing the right combination for continued success. Finding predictable approaches for successful restorative procedures has been the goal of clinical and material scientists. This article provides a broad perspective on the advances made in various classes of dental restorative materials in terms of their functionality with respect to pit and fissure sealants, glass ionomers, and dental composites. PMID:21726695

  4. High-speed civil transport - Advanced flight deck challenges

    NASA Technical Reports Server (NTRS)

    Swink, Jay R.; Goins, Richard T.

    1992-01-01

    This paper presents the results of a nine month study of the HSCT flight deck challenges and assessment of its benefits. Operational requirements are discussed and the most significant findings for specified advanced concepts are highlighted. These concepts are a no nose-droop configuration, a far forward cockpit location and advanced crew monitoring and control of complex systems. Results indicate that the no nose-droop configuration is critically dependent on the design and development of a safe, reliable and certifiable synthetic vision system (SVS). This configuration would cause significant weight, performance and cost penalties. A far forward cockpit configuration with a tandem seating arrangement allows either an increase in additional payload or potential downsizing of the vehicle leading to increased performance efficiency and reductions in emissions. The technologies enabling such capabilities, which provide for Category III all-weather opreations on every flight represent a benefit multiplier in a 20005 ATM network in terms of enhanced economic viability and environmental acceptability.

  5. SCIENCE BRIEF: ADVANCED CONCEPTS

    EPA Science Inventory

    Research on advanced concepts will evaluate and demonstrate the application of innovative infrastructure designs, management procedures and operational approaches. Advanced concepts go beyond simple asset management. The infusion of these advanced concepts into established wastew...

  6. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  7. [Submitting studies without significant results].

    PubMed

    Texier, Gaëtan; Meynard, Jean-Baptiste; Michel, Rémy; Migliani, René; Boutin, Jean-Paul

    2007-03-01

    When a study finds that no exposure factor or therapy is significantly related to a given effect, researchers legitimately wonder if the results should be submitted for publication and to what journal. Clinical trials that report significant associations have a higher probability of publication, a phenomenon known as selective publication. The principal reasons of this selective publication include author self-censorship, peer-reviewing, trials not intended for publication, interpretation of the p value, cost of journal subscriptions, and policies. Subsequent reviews and meta-analyses are biased by the unavailability of nonsignificant results. Suggestions for preventing this risk include university training, trial registries, an international standard randomised controlled trial number (ISRCTN), Cochrane collaboration, and the gray literature. Journals (including electronic journals) interested in studies with nonsignificant results are listed. New technologies are changing the relations between publishers, libraries, authors and readers. PMID:17287106

  8. 25 CFR 214.9 - Advance rental.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Advance rental. 214.9 Section 214.9 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.9 Advance rental. (a) Lessees shall pay, in addition...

  9. 25 CFR 214.9 - Advance rental.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Advance rental. 214.9 Section 214.9 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.9 Advance rental. (a) Lessees shall pay, in addition...

  10. 25 CFR 214.9 - Advance rental.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Advance rental. 214.9 Section 214.9 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.9 Advance rental. (a) Lessees shall pay, in addition...

  11. 25 CFR 214.9 - Advance rental.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Advance rental. 214.9 Section 214.9 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.9 Advance rental. (a) Lessees shall pay, in addition...

  12. Additive Manufacturing and High-Performance Computing: a Disruptive Latent Technology

    NASA Astrophysics Data System (ADS)

    Goodwin, Bruce

    2015-03-01

    This presentation will discuss the relationship between recent advances in Additive Manufacturing (AM) technology, High-Performance Computing (HPC) simulation and design capabilities, and related advances in Uncertainty Quantification (UQ), and then examines their impacts upon national and international security. The presentation surveys how AM accelerates the fabrication process, while HPC combined with UQ provides a fast track for the engineering design cycle. The combination of AM and HPC/UQ almost eliminates the engineering design and prototype iterative cycle, thereby dramatically reducing cost of production and time-to-market. These methods thereby present significant benefits for US national interests, both civilian and military, in an age of austerity. Finally, considering cyber security issues and the advent of the ``cloud,'' these disruptive, currently latent technologies may well enable proliferation and so challenge both nuclear and non-nuclear aspects of international security.

  13. Re-analysis of survival data of cancer patients utilizing additive homeopathy.

    PubMed

    Gleiss, Andreas; Frass, Michael; Gaertner, Katharina

    2016-08-01

    In this short communication we present a re-analysis of homeopathic patient data in comparison to control patient data from the same Outpatient´s Unit "Homeopathy in malignant diseases" of the Medical University of Vienna. In this analysis we took account of a probable immortal time bias. For patients suffering from advanced stages of cancer and surviving the first 6 or 12 months after diagnosis, respectively, the results show that utilizing homeopathy gives a statistically significant (p<0.001) advantage over control patients regarding survival time. In conclusion, bearing in mind all limitations, the results of this retrospective study suggest that patients with advanced stages of cancer might benefit from additional homeopathic treatment until a survival time of up to 12 months after diagnosis. PMID:27515878

  14. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... information it requires for the Advance Publication, Coordination and Notification of frequency assignments... information required by the ITU Radiocommunication Bureau to advance publish, coordinate and notify...

  15. Advanced lubrication systems and materials. Final report

    SciTech Connect

    Hsu, S.

    1998-05-07

    This report described the work conducted at the National Institute of Standards and Technology under an interagency agreement signed in September 1992 between DOE and NIST for 5 years. The interagency agreement envisions continual funding from DOE to support the development of fuel efficient, low emission engine technologies in terms of lubrication, friction, and wear control encountered in the development of advanced transportation technologies. However, in 1994, the DOE office of transportation technologies was reorganized and the tribology program was dissolved. The work at NIST therefore continued at a low level without further funding from DOE. The work continued to support transportation technologies in the development of fuel efficient, low emission engine development. Under this program, significant progress has been made in advancing the state of the art of lubrication technology for advanced engine research and development. Some of the highlights are: (1) developed an advanced high temperature liquid lubricant capable of sustaining high temperatures in a prototype heat engine; (2) developed a novel liquid lubricant which potentially could lower the emission of heavy duty diesel engines; (3) developed lubricant chemistries for ceramics used in the heat engines; (4) developed application maps for ceramic lubricant chemistry combinations for design purpose; and (5) developed novel test methods to screen lubricant chemistries for automotive air-conditioning compressors lubricated by R-134a (Freon substitute). Most of these findings have been reported to the DOE program office through Argonne National Laboratory who manages the overall program. A list of those reports and a copy of the report submitted to the Argonne National Laboratory is attached in Appendix A. Additional reports have also been submitted separately to DOE program managers. These are attached in Appendix B.

  16. A survey of advanced battery systems for space applications

    NASA Technical Reports Server (NTRS)

    Attia, Alan I.

    1989-01-01

    The results of a survey on advanced secondary battery systems for space applications are presented. The objectives were: to identify advanced battery systems capable of meeting the requirements of various types of space missions, with significant advantages over currently available batteries, to obtain an accurate estimate of the anticipated improvements of these advanced systems, and to obtain a consensus for the selection of systems most likely to yield the desired improvements. Few advanced systems are likely to exceed a specific energy of 150 Wh/kg and meet the additional requirements of safety and reliability within the next 15 years. The few that have this potential are: (1) regenerative fuel cells, both alkaline and solid polymer electrolyte (SPE) types for large power systems; (2) lithium-intercalatable cathodes, particularly the metal ozides intercalatable cathodes (MnO2 or CoO2), with applications limited to small spacecrafts requiring limited cycle life and low power levels; (3) lithium molten salt systems (e.g., LiAl-FeS2); and (4) Na/beta Alumina/Sulfur or metal chlorides cells. Likely technological advances that would enhance the performance of all the above systems are also identified, in particular: improved bifunctional oxygen electrodes; improved manufacturing technology for thin film lithium electrodes in combination with polymeric electrolytes; improved seals for the lithium molten salt cells; and improved ceramics for sodium/solid electrolyte cells.

  17. Assessment of HAPs emissions from advanced power systems

    SciTech Connect

    Erickson, T.A.; Brekke, D.W.; Botros, P.E.

    1996-12-31

    The 1990 Clean Air Act Amendments (CAAA) identified 189 substances as air toxics or hazardous air pollutants (HAPs). Under the CAAA, the U. S. Environmental Protection Agency (EPA) must regulate emissions of these HAPs at their sources, including advanced power systems used for the production of electricity. Eleven trace elements are included in the CAAA list of HAPS, as shown in Table 1. The EPA will define those sources that require regulation and limit their emissions according to regulatory directives. This project focused on evaluating and manipulating the advanced power systems HAPs data currently available for presentation to the U.S. Department of Energy (DOE). Trace components included in the 189 HAPs of the 1990 CAAA are: antimony compounds; arsenic compounds; beryllium compounds; cadmium compounds; chromium compounds; cobalt compounds; lead compounds; manganese compounds; mercury compounds; nickel compounds; and selenium compounds. The review of trace element emissions from advanced power systems and hot-gas cleanup systems included data from Tidd Station, General Electric hot-gas cleanup, Louisiana Gasification Technology Incorporated, and the Cool Water plant. Very few other sources of information were located, and those that were contained significantly flawed information that was not of value to this project. To offset the shortage of information, thermochemical equilibrium predictions were used in evaluating advanced control systems. An outline of the systems reviewed is given in Table 2. In addition to the four demonstration and 1 full-scale systems reviewed, nine conventional systems were also reviewed for comparison with the advanced systems.

  18. 77 FR 71400 - Procurement List, Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-30

    ... . SUPPLEMENTARY INFORMATION: Additions On 8/24/2012 (77 FR 51522-51523) and 10/5/2012 (77 FR 60969), the Committee.... Regulatory Flexibility Act Certification I certify that the following action will not have a significant impact on a substantial number of small entities. The major factors considered for this...

  19. 31 CFR 561.404 - Significant transaction or transactions; significant financial services; significant financial...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... a business development strategy. (d) Nexus. The proximity between the foreign financial institution... (b)(3) of that section. For example, a transaction or financial service in which a foreign financial... significance than a transaction or financial service a foreign financial institution conducts for or...

  20. 31 CFR 561.404 - Significant transaction or transactions; significant financial services; significant financial...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... part of a pattern of conduct or the result of a business development strategy. (d) Nexus. The proximity... service in which a foreign financial institution provides brokerage or clearing services to, or maintains... generally would be of greater significance than a transaction or financial service a foreign...

  1. Systemic Chemotherapy in Advanced Pancreatic Cancer

    PubMed Central

    Lee, Hee Seung; Park, Seung Woo

    2016-01-01

    Pancreatic cancer remains one of the most lethal cancers. These patients often have multiple symptoms, and integrated supportive care is critical in helping them remain well for as long as possible. Fluorouracil-based chemotherapy is known to improve overall survival (OS) by approximately 3 months, compared to the best supportive care alone. A 1997 study comparing gemcitabine and fluorouracil treatment of advanced pancreatic cancer patients showed an improvement in OS of 1 month in patients receiving gemcitabine. Over the next 10 years, multiple randomized studies compared single-agent gemcitabine with combination chemotherapy and showed no effective survival improvement. However, the addition of erlotinib, an epidermal growth factor receptor (EGFR) inhibitor, was associated with a significant improvement in OS of approximately 2 weeks. However, adoption of this regimen has not been widespread because of its limited effect and added toxicity. Two clinical trials have recently prolonged OS in advanced pancreatic cancer patients by almost 1 year. The first compared FOLFIRINOX with gemcitabine alone, and was associated with a significant improvement in median survival. The second compared gemcitabine and nab-paclitaxel with gemcitabine alone, and was associated with improvements in OS. At present, these regimens are considered standard treatment for patients with good performance statuses. PMID:27114434

  2. 7 CFR 1980.472 - Protective advances.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan Program § 1980.472 Protective... property management. A. Protective advances will not be made in lieu of additional loans, in...

  3. Three Neglected Advances in Classical Genetics.

    ERIC Educational Resources Information Center

    Miller, Wilmer J.; Hollander, Willard F.

    1995-01-01

    This article describes three advances in classical genetics: improved pedigree charting, use of a standard of reference, and calculation of probabilities in complex assortment. Provides support for the importance of teaching these methods in addition to new techniques. (LZ)

  4. Investigation of effect of particle size and rumen fluid addition on specific methane yields of high lignocellulose grass silage.

    PubMed

    Wall, D M; Straccialini, B; Allen, E; Nolan, P; Herrmann, C; O'Kiely, P; Murphy, J D

    2015-09-01

    This work examines the digestion of advanced growth stage grass silage. Two variables were investigated: particle size (greater than 3 cm and less than 1cm) and rumen fluid addition. Batch studies indicated particle size and rumen fluid addition had little effect on specific methane yields (SMYs). In continuous digestion of 3 cm silage the SMY was 342 and 343 L CH4 kg(-1)VS, respectively, with and without rumen fluid addition. However, digester operation was significantly affected through silage floating on the liquor surface and its entanglement in the mixing system. Digestion of 1cm silage with no rumen fluid addition struggled; volatile fatty acid concentrations rose and SMYs dropped. The best case was 1cm silage with rumen fluid addition, offering higher SMYs of 371 L CH4 kg(-1)VS and stable operation throughout. Thus, physical and biological treatments benefited continuous digestion of high fibre grass silage. PMID:26038332

  5. Advanced Microturbine Systems

    SciTech Connect

    Rosfjord, T; Tredway, W; Chen, A; Mulugeta, J; Bhatia, T

    2008-12-31

    In July 2000, the United Technologies Research Center (UTRC) was one of five recipients of a US Department of Energy contract under the Advanced Microturbine System (AMS) program managed by the Office of Distributed Energy (DE). The AMS program resulted from several government-industry workshops that recognized that microturbine systems could play an important role in improving customer choice and value for electrical power. That is, the group believed that electrical power could be delivered to customers more efficiently and reliably than the grid if an effective distributed energy strategy was followed. Further, the production of this distributed power would be accomplished with less undesirable pollutants of nitric oxides (NOx) unburned hydrocarbons (UHC), and carbon monoxide (CO). In 2000, the electrical grid delivered energy to US customers at a national average of approximately 32% efficiency. This value reflects a wide range of powerplants, but is dominated by older, coal burning stations that provide approximately 50% of US electrical power. The grid efficiency is also affected by transmission and distribution (T&D) line losses that can be significant during peak power usage. In some locations this loss is estimated to be 15%. Load pockets can also be so constrained that sufficient power cannot be transmitted without requiring the installation of new wires. New T&D can be very expensive and challenging as it is often required in populated regions that do not want above ground wires. While historically grid reliability has satisfied most customers, increasing electronic transactions and the computer-controlled processes of the 'digital economy' demand higher reliability. For them, power outages can be very costly because of transaction, work-in-progress, or perishable commodity losses. Powerplants that produce the grid electrical power emit significant levels of undesirable NOx, UHC, and CO pollutants. The level of emission is quoted as either a technology

  6. Antagonistic control of a dual-input mammalian gene switch by food additives

    PubMed Central

    Xie, Mingqi; Ye, Haifeng; Hamri, Ghislaine Charpin-El; Fussenegger, Martin

    2014-01-01

    Synthetic biology has significantly advanced the design of mammalian trigger-inducible transgene-control devices that are able to programme complex cellular behaviour. Fruit-based benzoate derivatives licensed as food additives, such as flavours (e.g. vanillate) and preservatives (e.g. benzoate), are a particularly attractive class of trigger compounds for orthogonal mammalian transgene control devices because of their innocuousness, physiological compatibility and simple oral administration. Capitalizing on the genetic componentry of the soil bacterium Comamonas testosteroni, which has evolved to catabolize a variety of aromatic compounds, we have designed different mammalian gene expression systems that could be induced and repressed by the food additives benzoate and vanillate. When implanting designer cells engineered for gene switch-driven expression of the human placental secreted alkaline phosphatase (SEAP) into mice, blood SEAP levels of treated animals directly correlated with a benzoate-enriched drinking programme. Additionally, the benzoate-/vanillate-responsive device was compatible with other transgene control systems and could be assembled into higher-order control networks providing expression dynamics reminiscent of a lap-timing stopwatch. Designer gene switches using licensed food additives as trigger compounds to achieve antagonistic dual-input expression profiles and provide novel control topologies and regulation dynamics may advance future gene- and cell-based therapies. PMID:25030908

  7. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  8. 75 FR 27313 - Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED PROCUREMENT LIST Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the... or Severely Disabled, Jefferson Plaza 2, Suite 10800, 1421 Jefferson Davis Highway,...

  9. Significances of Multimedia Technologies Training

    NASA Astrophysics Data System (ADS)

    Zhang, Fulei

    The use of multimedia technologies in education has enabled teachers to simulate final outcomes and assist s-tudents in applying knowledge learned from textbooks, thereby compensating for the deficiency of traditional teach- ing methods. It is important to examine how effective these technologies are in practical use. This study developed online learning-teaching resource platforms using Flash multimedia, providing interactive and integrated features in an easy-to-use user interface, in order to discuss Computer-Aided Drawing (CAD). The study utilized a teaching experiment with a non-equivalent pretest-posttest control group design to test and discuss students' professional cognition, operating skill cognition, and level of learning satisfaction during the learning process. No significant differences emerged between the groups in regards to professional cognition or operation skills cognition. However, a significant difference in learning satisfaction was noted, indicating that the coursework with multimedia Flash produced greater satisfaction than with traditional learning methods. Results are explained in detail and recommendations for further research provided.

  10. Public Health Significance of Neuroticism

    PubMed Central

    Lahey, Benjamin B.

    2009-01-01

    The personality trait of neuroticism refers to relatively stable tendencies to respond with negative emotions to threat, frustration, or loss. Individuals in the population vary markedly on this trait, ranging from frequent and intense emotional reactions to minor challenges to little emotional reaction even in the face of significant difficulties. Although not widely appreciated, there is growing evidence that neuroticism is a psychological trait of profound public health significance. Neuroticism is a robust correlate and predictor of many different mental and physical disorders, comorbidity among them, and the frequency of mental and general health service use. Indeed, neuroticism apparently is a predictor of the quality and longevity of our lives. Achieving a full understanding of the nature and origins of neuroticism, and the mechanisms through which neuroticism is linked to mental and physical disorders, should be a top priority for research. Knowing why neuroticism predicts such a wide variety of seemingly diverse outcomes should lead to improved understanding of commonalities among those outcomes and improved strategies for preventing them. PMID:19449983

  11. Significance of biofilms in dentistry.

    PubMed

    Wróblewska, Marta; Strużycka, Izabela; Mierzwińska-Nastalska, Elżbieta

    2015-01-01

    In the past decades significant scientific progress has taken place in the knowledge about biofilms. They constitute multilayer conglomerates of bacteria and fungi, surrounded by carbohydrates which they produce, as well as substances derived from saliva and gingival fluid. Modern techniques showed significant diversity of the biofilm environment and a system of microbial communication (quorum sensing), enhancing their survival. At present it is believed that the majority of infections, particularly chronic with exacerbations, are a result of biofilm formation, particularly in the presence of biomaterials. It should be emphasised that penetration of antibiotics and other antimicrobial agents into deeper layers of a biofilm is poor, causing therapeutic problems and necessitating sometimes removal of the implant or prosthesis. Biofilms play an increasing role in dentistry as a result of more and more broad use in dental practice of plastic and implantable materials. Biofilms are produced on the surfaces of teeth as dental plaque, in the para-nasal sinuses, on prostheses, dental implants, as well as in waterlines of a dental unit, constituting a particular risk for severely immunocompromised patients. New methods of therapy and prevention of infections linked to biofilms are under development. PMID:27139354

  12. Refining Breast Cancer Risk Stratification: Additional Genes, Additional Information.

    PubMed

    Kurian, Allison W; Antoniou, Antonis C; Domchek, Susan M

    2016-01-01

    Recent advances in genomic technology have enabled far more rapid, less expensive sequencing of multiple genes than was possible only a few years ago. Advances in bioinformatics also facilitate the interpretation of large amounts of genomic data. New strategies for cancer genetic risk assessment include multiplex sequencing panels of 5 to more than 100 genes (in which rare mutations are often associated with at least two times the average risk of developing breast cancer) and panels of common single-nucleotide polymorphisms (SNPs), combinations of which are generally associated with more modest cancer risks (more than twofold). Although these new multiple-gene panel tests are used in oncology practice, questions remain about the clinical validity and the clinical utility of their results. To translate this increasingly complex genetic information for clinical use, cancer risk prediction tools are under development that consider the joint effects of all susceptibility genes, together with other established breast cancer risk factors. Risk-adapted screening and prevention protocols are underway, with ongoing refinement as genetic knowledge grows. Priority areas for future research include the clinical validity and clinical utility of emerging genetic tests; the accuracy of developing cancer risk prediction models; and the long-term outcomes of risk-adapted screening and prevention protocols, in terms of patients' experiences and survival. PMID:27249685

  13. Microbial biosurfactants as additives for food industries.

    PubMed

    Campos, Jenyffer Medeiros; Stamford, Tânia Lúcia Montenegro; Sarubbo, Leonie Asfora; de Luna, Juliana Moura; Rufino, Raquel Diniz; Banat, Ibrahim M

    2013-01-01

    Microbial biosurfactants with high ability to reduce surface and interfacial surface tension and conferring important properties such as emulsification, detergency, solubilization, lubrication and phase dispersion have a wide range of potential applications in many industries. Significant interest in these compounds has been demonstrated by environmental, bioremediation, oil, petroleum, food, beverage, cosmetic and pharmaceutical industries attracted by their low toxicity, biodegradability and sustainable production technologies. Despite having significant potentials associated with emulsion formation, stabilization, antiadhesive and antimicrobial activities, significantly less output and applications have been reported in food industry. This has been exacerbated by uneconomical or uncompetitive costing issues for their production when compared to plant or chemical counterparts. In this review, biosurfactants properties, present uses and potential future applications as food additives acting as thickening, emulsifying, dispersing or stabilising agents in addition to the use of sustainable economic processes utilising agro-industrial wastes as alternative substrates for their production are discussed. PMID:23956227

  14. Anterior tumors of the prostate: diagnosis and significance

    PubMed Central

    Werahera, Priya N.; Crawford, E. David; La Rosa, Francisco G.; Torkko, Kathleen C.; Schulte, Beth; Sullivan, Holly T.; van Bokhoven, Adrie; Lucia, M. Scott; Kim, Fernando J.

    2015-01-01

    Introduction Prostate biopsies are usually taken from the peripheral rather than anterior region of the prostate. Consequently, tumors originating from the anterior apical region and transition zones may be under-sampled. We examined whether addition of transrectal anterior biopsy (TAB) would improve efficacy of prostate biopsies. Materials and methods Simulations of TAB and sextant biopsy (SB) were performed using computer models of 86 autopsy prostates (AP) and 40 radical prostatectomy (RP) specimens. TAB was obtained bilaterally from apex, mid, and base regions by advancing the biopsy needle 5 mm–35 mm beyond the prostatic capsule. A phase I clinical trial with 114 patients was conducted to determine the performance of an extended biopsy protocol consisting of TAB, SB, and laterally-directed biopsy (LDB). Results The overall cancer detection rates of SB and TAB were 33% and 55% for AP series (p = 0.00003); 60% and 88% for RP series (p = 0.006). Alternatively, SB + bilateral apical TAB and SB + bilateral mid TAB had cancer detection rates of 45% and 42% for AP series; 80% and 78% for RP series. The extended biopsy protocol detected cancer in 33% (38/114) of patients with 29, 25, and 15 diagnosed by SB, LDB, and bilateral apical TAB, respectively. Patients diagnosed by bilateral apical TAB versus SB (p = 0.01) and LDB (p = 0.02) were statistically significant. Without bilateral apical TAB, the overall cancer detection rate decreased to 30% (34/114). Conclusions Inclusion of bilateral TAB from apical region for first time and repeat prostate biopsies may increase diagnosis of prostate cancer. The clinical significance of these findings needs further investigations and clinical follow up. PMID:24128826

  15. Advanced Motors

    SciTech Connect

    Knoth, Edward A; Chelluri, Bhanumathi; Schumaker, Edward J

    2012-12-14

    be met with a variety of bonded magnet compositions. The torque ripple was found to drop significantly by using thinner magnet segments. The powder co-filling and subsequent compaction processing allow for thinner magnet structures to be formed. Torque ripple can be further reduced by using skewing and pole shaping techniques. The techniques can be incorporated into the rotor during the powder co-filling process.

  16. Yawning and its physiological significance.

    PubMed

    Gupta, Sharat; Mittal, Shallu

    2013-01-01

    Although yawning is a commonly witnessed human behavior, yet it has not been taught in much detail in medical schools because, until the date, no particular physiological significance has been associated with it. It is characterized by opening up of mouth which is accompanied by a long inspiration, with a brief interruption of ventilation and followed by a short expiration. Since time immemorial, yawning has been associated with drowsiness and boredom. However, this age old belief is all set to change as the results of some newer studies have pointed out that yawning might be a way by which our body is trying to accomplish some more meaningful goals. In this review, we have tried to put together some of the important functions that have been proposed by a few authors, with the hope that this article will stimulate the interest of newer researchers in this hitherto unexplored field. PMID:23776833

  17. The energetic significance of cooking.

    PubMed

    Carmody, Rachel N; Wrangham, Richard W

    2009-10-01

    While cooking has long been argued to improve the diet, the nature of the improvement has not been well defined. As a result, the evolutionary significance of cooking has variously been proposed as being substantial or relatively trivial. In this paper, we evaluate the hypothesis that an important and consistent effect of cooking food is a rise in its net energy value. The pathways by which cooking influences net energy value differ for starch, protein, and lipid, and we therefore consider plant and animal foods separately. Evidence of compromised physiological performance among individuals on raw diets supports the hypothesis that cooked diets tend to provide energy. Mechanisms contributing to energy being gained from cooking include increased digestibility of starch and protein, reduced costs of digestion for cooked versus raw meat, and reduced energetic costs of detoxification and defence against pathogens. If cooking consistently improves the energetic value of foods through such mechanisms, its evolutionary impact depends partly on the relative energetic benefits of non-thermal processing methods used prior to cooking. We suggest that if non-thermal processing methods such as pounding were used by Lower Palaeolithic Homo, they likely provided an important increase in energy gain over unprocessed raw diets. However, cooking has critical effects not easily achievable by non-thermal processing, including the relatively complete gelatinisation of starch, efficient denaturing of proteins, and killing of food borne pathogens. This means that however sophisticated the non-thermal processing methods were, cooking would have conferred incremental energetic benefits. While much remains to be discovered, we conclude that the adoption of cooking would have led to an important rise in energy availability. For this reason, we predict that cooking had substantial evolutionary significance. PMID:19732938

  18. The functional significance of stereopsis.

    PubMed

    O'Connor, Anna R; Birch, Eileen E; Anderson, Susan; Draper, Hayley

    2010-04-01

    Purpose. Development or restoration of binocular vision is one of the key goals of strabismus management; however, the functional impact of stereoacuity has largely been neglected. Methods. Subjects aged 10 to 30 years with normal, reduced, or nil stereoacuity performed three tasks: Purdue pegboard (measured how many pegs placed in 30 seconds), bead threading (with two sizes of bead, to increase the difficulty; measured time taken to thread a number of beads), and water pouring (measured both accuracy and time). All tests were undertaken both with and without occlusion of one eye. Results. One hundred forty-three subjects were recruited, 32.9% (n = 47) with a manifest deviation. Performances on the pegboard and bead tasks were significantly worse in the nil stereoacuity group when compared with that of the normal stereoacuity group. On the large and small bead tasks, those with reduced stereoacuity were better than those with nil stereoacuity (when the Preschool Randot Stereoacuity Test [Stereo Optical Co, Inc., Chicago, IL] results were used to determine stereoacuity levels). Comparison of the short-term monocular conditions (those with normal stereoacuity but occluded) with nil stereoacuity showed that, on all measures, the performance was best in the nil stereoacuity group and was statistically significant for the large and small beads task, irrespective of which test result was used to define the stereoacuity levels. Conclusions. Performance on motor skills tasks was related to stereoacuity, with subjects with normal stereoacuity performing best on all tests. This quantifiable degradation in performance on some motor skill tasks supports the need to implement management strategies to maximize development of high-grade stereoacuity. PMID:19933184

  19. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  20. Testing the Difference of Correlated Agreement Coefficients for Statistical Significance

    ERIC Educational Resources Information Center

    Gwet, Kilem L.

    2016-01-01

    This article addresses the problem of testing the difference between two correlated agreement coefficients for statistical significance. A number of authors have proposed methods for testing the difference between two correlated kappa coefficients, which require either the use of resampling methods or the use of advanced statistical modeling…

  1. Seeking significance in three-dimensional protein structure comparisons.

    PubMed

    Mizuguchi, K; Go, N

    1995-06-01

    What is the significance of three-dimensional structural similarity? This fundamental question still remains unanswered in spite of advances in automatic structure comparison methods that have been made in the last few years. The answer to this question will give us a much deeper insight into the principles of protein architecture. PMID:7583636

  2. Advanced PFBC transient analysis

    SciTech Connect

    White, J.S.; Bonk, D.L.

    1997-05-01

    Transient modeling and analysis of advanced Pressurized Fluidized Bed Combustion (PFBC) systems is a research area that is currently under investigation by the US Department of Energy`s Federal Energy Technology Center (FETC). The object of the effort is to identify key operating parameters that affect plant performance and then quantify the basic response of major sub-systems to changes in operating conditions. PC-TRAX{trademark}, a commercially available dynamic software program, was chosen and applied in this modeling and analysis effort. This paper describes the development of a series of TRAX-based transient models of advanced PFBC power plants. These power plants burn coal or other suitable fuel in a PFBC, and the high temperature flue gas supports low-Btu fuel gas or natural gas combustion in a gas turbine topping combustor. When it is utilized, the low-Btu fuel gas is produced in a bubbling bed carbonizer. High temperature, high pressure combustion products exiting the topping combustor are expanded in a modified gas turbine to generate electrical power. Waste heat from the system is used to raise and superheat steam for a reheat steam turbine bottoming cycle that generates additional electrical power. Basic control/instrumentation models were developed and modeled in PC-TRAX and used to investigate off-design plant performance. System performance for various transient conditions and control philosophies was studied.

  3. Advanced Geosynchronous Imager

    NASA Technical Reports Server (NTRS)

    Chesters, Dennis

    1999-01-01

    For improved understanding of chaotic processes and the diurnal cycle, an advanced GOES imager must also have the multi-spectral spectral bands used by low earth orbit (LEO) imagers, with on-orbit calibration for all bands. A synergy between GEO and LEO radiometry would enable earth system scientists to fuse the remote sensing data from all the spaceborne platforms. These additional radiometric capabilities are designed to observe important physical processes that vary rapidly and unpredicably: smoke, fires, precipitation, ozone, volcanic ash, cloud phase and height, and surface temperature. We believe the technology now exists to develop an imaging system that can meet future weather reporting and earth system science needs. To meet this need, we propose a design for a comprehensive geosynchronous atmospheric imager. This imager is envisioned to fly on a GOES-N class spacecraft, within the volume, weight and power constraints of a platform similar to GOES-N while delivering 100 times more data and radiometric quality than the GOES-N imager. The higher data rate probably requires its own ground station, which could serve as a systems prototype for NOAA's next generation of operational satellites. For operational compatibility, our proposed advanced GOES imaging system contains the GOES-R requirements as a subset, and the GOES-N imager capabilities (and the sounder's imaging channels) as a further subset.

  4. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  5. Additive manufacturing of biologically-inspired materials.

    PubMed

    Studart, André R

    2016-01-21

    Additive manufacturing (AM) technologies offer an attractive pathway towards the fabrication of functional materials featuring complex heterogeneous architectures inspired by biological systems. In this paper, recent research on the use of AM approaches to program the local chemical composition, structure and properties of biologically-inspired materials is reviewed. A variety of structural motifs found in biological composites have been successfully emulated in synthetic systems using inkjet-based, direct-writing, stereolithography and slip casting technologies. The replication in synthetic systems of design principles underlying such structural motifs has enabled the fabrication of lightweight cellular materials, strong and tough composites, soft robots and autonomously shaping structures with unprecedented properties and functionalities. Pushing the current limits of AM technologies in future research should bring us closer to the manufacturing capabilities of living organisms, opening the way for the digital fabrication of advanced materials with superior performance, lower environmental impact and new functionalities. PMID:26750617

  6. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  7. USMC UGS technology advancements

    NASA Astrophysics Data System (ADS)

    Hartup, David C.; Barr, Michael E.; Hirz, Philip M.; Kipp, Jason; Fishburn, Thomas A.; Waller, Ezra S.; Marks, Brian A.

    2008-04-01

    Technology advancements for the USMC UGS system are described. Integration of the ARL Blue Radio/CSR into the System Controller and Radio Repeater permit the TRSS system to operate seamlessly within the Family of UGS concept. In addition to the Blue Radio/CSR, the TRSS system provides VHF and SATCOM radio links. The TRSS system is compatible with a wide range of imagers, including those with both analog and digital interfaces. The TRSS System Controller permits simultaneous monitoring of 2 camera inputs. To complement enhanced compatibility and improved processing, the mechanical housing of the TRSS System Controller has been updated. The SDR-II, a system monitoring device, also incorporates four Blue Radio/CSRs along with other communication capabilities, making it an ideal choice for a monitoring station within the Family of UGS. Field testing of L-3 Nova's UGS system at YPG has shown flawless performance, capturing all 126 targets.

  8. Advanced glycation end products

    PubMed Central

    Gkogkolou, Paraskevi; Böhm, Markus

    2012-01-01

    Aging is the progressive accumulation of damage to an organism over time leading to disease and death. Aging research has been very intensive in the last years aiming at characterizing the pathophysiology of aging and finding possibilities to fight age-related diseases. Various theories of aging have been proposed. In the last years advanced glycation end products (AGEs) have received particular attention in this context. AGEs are formed in high amounts in diabetes but also in the physiological organism during aging. They have been etiologically implicated in numerous diabetes- and age-related diseases. Strategies inhibiting AGE accumulation and signaling seem to possess a therapeutic potential in these pathologies. However, still little is known on the precise role of AGEs during skin aging. In this review the existing literature on AGEs and skin aging will be reviewed. In addition, existing and potential anti-AGE strategies that may be beneficial on skin aging will be discussed. PMID:23467327

  9. Room for advancement

    SciTech Connect

    Carrio, L.A. ); Sharpe, R. ); Bizzarri, R.E. ); Wilson, T.E. )

    1993-12-01

    The advanced biological nutrient removal (ABNR) process is a viable nutrient removal choice for wastewater treatment plants where site limitations and energy costs are a concern. Specifically, ABNR plants: can remove more than 60% of total nitrogen; achieve a high degree of phosphorus removal - primarily by chemical additions; use step aeration (step feed) to save tank volume and site space and to eliminate mixed liquor recirculation requirements; use less energy; use a supplemental source of carbon (typically, methanol) in small quantities to achieve higher levels of nitrogen removal; take advantage of the highest denitrification rates of raw wastewater; allow nitrification of low alkalinity wastewater with no chemical supplement; can be created from existing step aeration plants with only minor modifications; and can retain all the flexibility and wet-weather flow stability of conventional step aeration systems. 5 figs., 2 tabs.

  10. Recent advances in sterol research

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Since 1970, the AOCS has been a regular host to the sterol symposia. The 2008 Sterol Symposium, “Recent Advances in Sterol Research,” was held at the AOCS Annual Meeting in Seattle, Washington. This year the symposium held special significance, for it hosted the presentation of the fourth G.J. Schro...

  11. Statistically significant relational data mining :

    SciTech Connect

    Berry, Jonathan W.; Leung, Vitus Joseph; Phillips, Cynthia Ann; Pinar, Ali; Robinson, David Gerald; Berger-Wolf, Tanya; Bhowmick, Sanjukta; Casleton, Emily; Kaiser, Mark; Nordman, Daniel J.; Wilson, Alyson G.

    2014-02-01

    This report summarizes the work performed under the project (3z(BStatitically significant relational data mining.(3y (BThe goal of the project was to add more statistical rigor to the fairly ad hoc area of data mining on graphs. Our goal was to develop better algorithms and better ways to evaluate algorithm quality. We concetrated on algorithms for community detection, approximate pattern matching, and graph similarity measures. Approximate pattern matching involves finding an instance of a relatively small pattern, expressed with tolerance, in a large graph of data observed with uncertainty. This report gathers the abstracts and references for the eight refereed publications that have appeared as part of this work. We then archive three pieces of research that have not yet been published. The first is theoretical and experimental evidence that a popular statistical measure for comparison of community assignments favors over-resolved communities over approximations to a ground truth. The second are statistically motivated methods for measuring the quality of an approximate match of a small pattern in a large graph. The third is a new probabilistic random graph model. Statisticians favor these models for graph analysis. The new local structure graph model overcomes some of the issues with popular models such as exponential random graph models and latent variable models.

  12. Determining Semantically Related Significant Genes.

    PubMed

    Taha, Kamal

    2014-01-01

    GO relation embodies some aspects of existence dependency. If GO term xis existence-dependent on GO term y, the presence of y implies the presence of x. Therefore, the genes annotated with the function of the GO term y are usually functionally and semantically related to the genes annotated with the function of the GO term x. A large number of gene set enrichment analysis methods have been developed in recent years for analyzing gene sets enrichment. However, most of these methods overlook the structural dependencies between GO terms in GO graph by not considering the concept of existence dependency. We propose in this paper a biological search engine called RSGSearch that identifies enriched sets of genes annotated with different functions using the concept of existence dependency. We observe that GO term xcannot be existence-dependent on GO term y, if x- and y- have the same specificity (biological characteristics). After encoding into a numeric format the contributions of GO terms annotating target genes to the semantics of their lowest common ancestors (LCAs), RSGSearch uses microarray experiment to identify the most significant LCA that annotates the result genes. We evaluated RSGSearch experimentally and compared it with five gene set enrichment systems. Results showed marked improvement. PMID:26357049

  13. Significant biases affecting abundance determinations

    NASA Astrophysics Data System (ADS)

    Wesson, Roger

    2015-08-01

    I have developed two highly efficient codes to automate analyses of emission line nebulae. The tools place particular emphasis on the propagation of uncertainties. The first tool, ALFA, uses a genetic algorithm to rapidly optimise the parameters of gaussian fits to line profiles. It can fit emission line spectra of arbitrary resolution, wavelength range and depth, with no user input at all. It is well suited to highly multiplexed spectroscopy such as that now being carried out with instruments such as MUSE at the VLT. The second tool, NEAT, carries out a full analysis of emission line fluxes, robustly propagating uncertainties using a Monte Carlo technique.Using these tools, I have found that considerable biases can be introduced into abundance determinations if the uncertainty distribution of emission lines is not well characterised. For weak lines, normally distributed uncertainties are generally assumed, though it is incorrect to do so, and significant biases can result. I discuss observational evidence of these biases. The two new codes contain routines to correctly characterise the probability distributions, giving more reliable results in analyses of emission line nebulae.

  14. Astrobiological Significance of Chemolithoautotrophic Acidophiles

    NASA Technical Reports Server (NTRS)

    Pikuta, Elena V.; Hoover, Richard B.

    2003-01-01

    For more than a century (since Winogradsky discovered lithoautotrophic bacteria) a dilemma in microbiology has concerned life that first inhabited the Earth. Which types of life forms first appeared in the primordial oceans during the earliest geological period on Earth as the primary ancestors of modem biological diversity? How did a metabolism of ancestors evolve: from lithoautotrophic to lithohetherotrophic and organoheterotrophic or from organoheterotrophic to organoautotrophic and lithomixotrophic types? At the present time, it is known that chemolithoheterotrophic and chemolithoautotrophic metabolizing bacteria are wide spread in different ecosystems. On Earth the acidic ecosystems are associated with geysers, volcanic fumaroles, hot springs, deep sea hydrothermal vents, caves, acid mine drainage and other technogenic ecosystems. Bioleaching played a significant role on a global geological scale during the Earth's formation. This important feature of bacteria has been successfully applied in industry. The lithoautotrophs include Bacteria and Archaea belonging to diverse genera containing thermophilic and mesophilic species. In this paper we discuss the lithotrophic microbial acidophiles and present some data with a description of new acidophilic iron- and sulfur- oxidizing bacterium isolated from the Chena Hot Springs in Alaska. We also consider the possible relevance of microbial acidophiles to Venus, Io, and acidic inclusions in glaciers and icy moons.

  15. Astrobiological significance of chemolithoautotrophic acidophiles

    NASA Astrophysics Data System (ADS)

    Pikuta, Elena V.; Hoover, Richard B.

    2004-02-01

    For more than a century (since Winogradsky discovered lithautotrophic bacteria) there has been a dilemma in microbiology about life that first inhabited the Earth. Which types of life forms first appeared in the primordial oceans during the earliest geological period on Earth as the primary ancestors of modern biological diversity? How did a metabolism of ancestors evolve: from lithoautotrophic to lithoheterotrophic and organoheterotrophic or from organoheterotrophic to organautotrophic and lithomixotrophic types? At the present time, it is known that chemolithoheterotrophic and chemolithoautotrophic metabolizing bacteria are wide spread in different ecosystems. On Earth the acidic ecosystems are associated with geysers, volcanic fumaroles, hot springs, deep sea hydrothermal vents, caves, acid mine drainage and other technogenic ecosystems. Bioleaching played a significant roel on a global geological scale during the Earth's formation. This important feature of bacteria has been successfully applied in industry. The lithoautotrophs include Bacteria and Archaea belonging to diverse genera containing thermophilic and mesophilic species. In this paper we discuss the lithotrophic microbial acidophiles and present some data with a description of new acidophilic iron- and sulfur-oxidizing bacterium isolated from the Chena Hot Springs in Alaska. We also consider the possible relevance of microbial acidophiles to Venus, Io, and acidic inclusions in glaciers and icy moons.

  16. Clinical significance of monocyte heterogeneity.

    PubMed

    Stansfield, Brian K; Ingram, David A

    2015-01-01

    Monocytes are primitive hematopoietic cells that primarily arise from the bone marrow, circulate in the peripheral blood and give rise to differentiated macrophages. Over the past two decades, considerable attention to monocyte diversity and macrophage polarization has provided contextual clues into the role of myelomonocytic derivatives in human disease. Until recently, human monocytes were subdivided based on expression of the surface marker CD16. "Classical" monocytes express surface markers denoted as CD14(++)CD16(-) and account for greater than 70% of total monocyte count, while "non-classical" monocytes express the CD16 antigen with low CD14 expression (CD14(+)CD16(++)). However, recognition of an intermediate population identified as CD14(++)CD16(+) supports the new paradigm that monocytes are a true heterogeneous population and careful identification of specific subpopulations is necessary for understanding monocyte function in human disease. Comparative studies of monocytes in mice have yielded more dichotomous results based on expression of the Ly6C antigen. In this review, we will discuss the use of monocyte subpopulations as biomarkers of human disease and summarize correlative studies in mice that may yield significant insight into the contribution of each subset to disease pathogenesis. PMID:25852821

  17. [The significance of antiphospholipid antibodies].

    PubMed

    Fojtík, Z

    2004-04-01

    Antiphospholipid antibodies (APLA) present very heterogeneous groups of antibodies which can significantly influence processes on different levels of coagulation cascade depending on effects of phospholipid surfaces on blood coagulation. This usually leads to a particular level of thrombophylia. Clinical syndrome accompanying positive APLA, such as antiphospholipid syndrome, was defined by clinical and laboratory symptoms. This clinical syndrome can be a primary syndrome, if other disorders with ability to induce generation of antibodies can be excluded, or a secondary syndrome. The most often in cases of systemic tissue disease. APLA can be divided according to the presence of lupus anticoagulant and anticardiolipin antibodies. According to a definition lupus anticoagulants are antibodies able to inhibit and prolong in vitro one or more blood clotting processes dependent on phospholipid surfaces. Anticardiolipin antibodies are antibodies measured by ELISA method with cardiolipin used as an antibody. Findings show that some APLA are directed against proteins bound to phospholipid surfaces. Main cofactor proteins include beta 2-GPI and prothrombin. Because of their heterogeneous specificity, APLA are directed against negative phospholipids or proteins bound to phospholipid surfaces and have important pathophysiology role in development of antiphospholipid syndrome. PMID:15214303

  18. Advanced lost foam from casting technology

    SciTech Connect

    Bates, C. E.; Littleton, H. E.; Askeland, D.; Griffin, J.; Miller, B. A.; Sheldon, D. S.

    1996-05-01

    Previous research made significant advances in understanding the Lost Foam Casting (LFC) Process and clearly identified areas where additional research was needed to improve the process and make it more functional in an industrial environment. The current project focused on five areas listed as follows: Task 1: Precision Pattern Production Task 2: Pattern Coating Consistency Task 3: Sand Fill and Compaction Effects Task 4: Pattern Gating Task 5: Mechanical Properties of Castings. This report summarizes the work done under the current contract in all five areas in the period of October 1, 1994 through December 31, 1995. Twenty-eight (28) companies jointly participate in the project. These companies represent a variety of disciplines, including pattern designers, pattern producers, coating manufacturers, plant design companies, compaction equipment manufacturers, casting producers, and casting buyers.

  19. Advances in pharmacotherapy for pediatric anxiety disorders.

    PubMed

    Rynn, Moira; Puliafico, Anthony; Heleniak, Charlotte; Rikhi, Pranav; Ghalib, Kareem; Vidair, Hilary

    2011-01-01

    Pediatric anxiety disorders are prevalent, chronic, and often lead to significant impaired functioning that impacts both short- and long-term outcomes for children and adolescents. Treatment options include pharmacotherapy and psychosocial interventions. This presentation will review treatment advances specifically for pharmacotherapy. Current research supports serotonin reuptake inhibitors as the medication class to be the first-line treatment option for pediatric anxiety disorders. Available evidence for the efficacy of other classes of medications will be reviewed, along with the available approaches to manage partial responders and nonresponders. The risks and benefits of pharmacotherapy will also be reviewed. In addition, recent research has shown the potential promise of novel agents that act upon other neural systems implicated in the development of pediatric anxiety disorders. Novel compounds that affect the glutamate system will be discussed. PMID:21225851

  20. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  1. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  2. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting. PMID:26118220

  3. Manipulating crystallization with molecular additives.

    PubMed

    Shtukenberg, Alexander G; Lee, Stephanie S; Kahr, Bart; Ward, Michael D

    2014-01-01

    Given the importance of organic crystals in a wide range of industrial applications, the chemistry, biology, materials science, and chemical engineering communities have focused considerable attention on developing methods to control crystal structure, size, shape, and orientation. Tailored additives have been used to control crystallization to great effect, presumably by selectively binding to particular crystallographic surfaces and sites. However, substantial knowledge gaps still exist in the fundamental mechanisms that govern the formation and growth of organic crystals in both the absence and presence of additives. In this review, we highlight research discoveries that reveal the role of additives, either introduced by design or present adventitiously, on various stages of formation and growth of organic crystals, including nucleation, dislocation spiral growth mechanisms, growth inhibition, and nonclassical crystal morphologies. The insights from these investigations and others of their kind are likely to guide the development of innovative methods to manipulate crystallization for a wide range of materials and applications. PMID:24579880

  4. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  5. Astrobiological Significance of Microbial Extremophiles

    NASA Technical Reports Server (NTRS)

    Pikuta, Elena V.; Hoover, Richard B.

    2007-01-01

    The microflora of the cryosphere of planet Earth provides the best analogs for life forms that might be found in the permafrost or polar ice caps of Mars, near the surface of the cometary nuclei, or in the liquid water beneath and the ice crusts of icy moons of Jupiter and Saturn. The importance of study alkaliphilic microorganisms for astrobiology was enhanced by the findings of abundant carbonates and carbonate globules rimmed with possibly biogenic magnetites in association with the putative microfossils in the ALH84001 meteorite. Although the ALH84001 "nanofossils" were to small and simple to be unambiguously recognized as biogenic, they stimulated Astrobiology research and studies of microbial extremophiles and biomarkers in ancient rocks and meteorites. Recent studies of CI and CM carbonaceous meteorites have resulted in the detection of the well-preserved mineralized remains of coccoidal and filamentous microorganisms in cyanobacterial mats. Energy Dispersive X-ray Analysis has shown anomalous biogenic element ratios clearly indicating they are not recent biological contaminants. This paper reviews microbial extremophiles in context of their significance to Astrobiology. The study of halophilic microorganisms was started from work with saline soils and lakes, and one of the record of good growth for Haloferax mediterranei was shown at 30 percent NaC1. Although alkali-tolerant nitrifying bacteria had previously been reported, the first described alkaliphilic microorganism was the bacterium Streptococcus faecalis. Halophilic and alkaliphilic forms are relevant to conditions that might be found in closed impact basins and craters on Mars filled with evaporite deposits. The first obligately acidophilic bacterium described was Acidithiobacillus ferrooxydans (formally Thiobacillus ferrooxidans). Later thermophilic lithotrophic acidophiles were found, and the hyperacidophilic moderately thermophilic species of the genus Picrophilus were found to grow at negative p

  6. Pressure drop and heat transfer in turbulent non-Newtonian pipe flow of advanced energy transmission fluids

    NASA Astrophysics Data System (ADS)

    Choi, U. S.; Liu, K. V.; Kasza, K. E.

    1988-03-01

    Argonne National Laboratory (ANL), under sponsorship of the U.S. Department of Energy, is making significant progress on the development of advanced energy transmission fluids for thermal systems, in particular district heating and cooling systems. ANL has identified two concepts for developing advanced energy transmission fluids. Tests have been conducted at ANL to prove these concepts. This paper presents experimental results and discusses the degradation behavior of linear polymer additives and the flow and heat transfer characteristics of non-melting slurry flows. The experimental data obtained in this study provide support for the use of friction reducing additives and slurries in thermal system applications.

  7. Exercise oscillatory ventilation: Mechanisms and prognostic significance

    PubMed Central

    Dhakal, Bishnu P; Lewis, Gregory D

    2016-01-01

    Alteration in breathing patterns characterized by cyclic variation of ventilation during rest and during exercise has been recognized in patients with advanced heart failure (HF) for nearly two centuries. Periodic breathing (PB) during exercise is known as exercise oscillatory ventilation (EOV) and is characterized by the periods of hyperpnea and hypopnea without interposed apnea. EOV is a non-invasive parameter detected during submaximal cardiopulmonary exercise testing. Presence of EOV during exercise in HF patients indicates significant impairment in resting and exercise hemodynamic parameters. EOV is also an independent risk factor for poor prognosis in HF patients both with reduced and preserved ejection fraction irrespective of other gas exchange variables. Circulatory delay, increased chemosensitivity, pulmonary congestion and increased ergoreflex signaling have been proposed as the mechanisms underlying the generation of EOV in HF patients. There is no proven treatment of EOV but its reversal has been noted with phosphodiesterase inhibitors, exercise training and acetazolamide in relatively small studies. In this review, we discuss the mechanistic basis of PB during exercise and the clinical implications of recognizing PB patterns in patients with HF. PMID:27022457

  8. 7 CFR 1469.4 - Significant resource concerns.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Provisions § 1469.4 Significant resource concerns. (a) Soil quality and water quality are nationally significant resource concerns for all land uses. (b) For each sign-up, the Chief may determine additional... 7 Agriculture 10 2010-01-01 2010-01-01 false Significant resource concerns. 1469.4 Section...

  9. Solidification process control for advanced superalloys

    NASA Technical Reports Server (NTRS)

    Gray, H. R.; Dreshfield, R. L.

    1982-01-01

    The importance of understanding and controlling the basic solidification process in high temperature alloy technology as applied to gas turbine engine production is discussed. Resultant tailoring of the superalloy macro- and microstructure offers significant potential for continued advances in superalloy use temperatures in turbine engines. Atomized superalloy powders, rapidly solidified superalloys, microstructural control, and advanced superalloys are discussed.

  10. Rotorcraft technology at Boeing Vertol: Recent advances

    NASA Technical Reports Server (NTRS)

    Shaw, John; Dadone, Leo; Wiesner, Robert

    1988-01-01

    An overview is presented of key accomplishments in the rotorcraft development at Boeing Vertol. Projects of particular significance: high speed rotor development and the Model 360 Advanced Technology Helicopter. Areas addressed in the overview are: advanced rotors with reduced noise and vibration, 3-D aerodynamic modeling, flight control and avionics, active control, automated diagnostics and prognostics, composite structures, and drive systems.

  11. Advanced Accessory Power Supply Topologies

    SciTech Connect

    Marlino, L.D.

    2010-06-15

    This Cooperative Research and Development Agreement (CRADA) began December 8, 2000 and ended September 30, 2009. The total funding provided by the Participant (General Motors Advanced Technology Vehicles [GM]) during the course of the CRADA totaled $1.2M enabling the Contractor (UT-Battelle, LLC [Oak Ridge National Laboratory, a.k.a. ORNL]) to contribute significantly to the joint project. The initial task was to work with GM on the feasibility of developing their conceptual approach of modifying major components of the existing traction inverter/drive to develop low cost, robust, accessory power. Two alternate methods for implementation were suggested by ORNL and both were proven successful through simulations and then extensive testing of prototypes designed and fabricated during the project. This validated the GM overall concept. Moreover, three joint U.S. patents were issued and subsequently licensed by GM. After successfully fulfilling the initial objective, the direction and duration of the CRADA was modified and GM provided funding for two additional tasks. The first new task was to provide the basic development for implementing a cascaded inverter technology into hybrid vehicles (including plug-in hybrid, fuel cell, and electric). The second new task was to continue the basic development for implementing inverter and converter topologies and new technology assessments for hybrid vehicle applications. Additionally, this task was to address the use of high temperature components in drive systems. Under this CRADA, ORNL conducted further research based on GM’s idea of using the motor magnetic core and windings to produce bidirectional accessory power supply that is nongalvanically coupled to the terminals of the high voltage dc-link battery of hybrid vehicles. In order not to interfere with the motor’s torque, ORNL suggested to use the zero-sequence, highfrequency harmonics carried by the main fundamental motor current for producing the accessory power

  12. ADVANCED TECHNOLOGIES FOR STRIPPER GAS WELL ENHANCEMENT

    SciTech Connect

    Ronald J. MacDonald

    2004-07-14

    As part of Task 1 in Advanced Technologies for Stripper Gas Well Enhancement, Schlumberger Data & Consulting Services (DCS) joined with two Appalachian Basin producers, Great Lakes Energy Partners, LLC, and Belden & Blake Corporation to develop methodologies for identification and enhancement of stripper wells with economic upside potential. These industry partners previously provided us with data for more than 700 wells in northwestern Pennsylvania. Phase 1 goals of this project are to develop and validate methodologies that can quickly and cost-effectively identify underperforming wells with remediation potential. We have enhanced and streamlined our software and are using it with the latest versions of Microsoft's{trademark} Access and Excel programs. During the last quarter of 2002, Great Lakes provided us with additional data for approximately 2,200 wells located in their Cooperstown field situated in northwestern Pennsylvania. We identified approximately 130 potential remediation candidates, and Great Lakes personnel are currently reviewing this list for viable remediation. Within the last few weeks, a list of five candidates have been chosen for refract, in addition to two alternate wells. This field has provided a rigorous test of our software and analytical methods. We have processed all the information provided to us including the Cooperstown data. Great Lakes also provided supplemental data listing the original operator of the wells. We have determined whether a statistically significant number of underperformers correlate to specific operators and/or their associated completion/stimulation methods. In addition, the DOE has reviewed a draft version of a final report.

  13. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  14. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  15. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  16. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  17. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  18. Silage Additives and Management Issues

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Inoculants are the most common silage additives in the United States. These products contain lactic acid bacteria to supplement the lactic acid bacteria naturally on the crop and help insure a consistent fermentation in the silo. There are three types of inoculants: homofermentative lactic acid bact...

  19. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  20. Advanced Thermally Stable Jet Fuels

    SciTech Connect

    A. Boehman; C. Song; H. H. Schobert; M. M. Coleman; P. G. Hatcher; S. Eser

    1998-01-01

    The Penn State program in advanced thermally stable jet fuels has five components: 1) development of mechanisms of degradation and solids formation; 2) quantitative measurement of growth of sub-micrometer and micrometer-sized particles during thermal stressing; 3) characterization of carbonaceous deposits by various instrumental and microscopic methods; 4) elucidation of the role of additives in retarding the formation of carbonaceous solids; and 5) assessment of the potential of producing high yields of cycloalkanes and hydroaromatics from coal.

  1. Development of advanced thermoelectric materials

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The development of an advanced thermoelectric material for radioisotope thermoelectric generator (RTG) applications is reported. A number of materials were explored. The bulk of the effort, however, was devoted to improving silicon germanium alloys by the addition of gallium phosphide, the synthesis and evaluation of lanthanum chrome sulfide and the formulation of various mixtures of lanthanum sulfide and chrome sulfide. It is found that each of these materials exhibits promise as a thermoelectric material.

  2. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  3. Workplace Discrimination: An Additional Stressor for Internationally Educated Nurses.

    PubMed

    Baptiste, Maria M

    2015-09-01

    Discrimination against internationally educated nurses (IENs) remains a seldom-explored topic in the United States. Yet, the literature describing experiences of IENs indicates that some do experience workplace discrimination as an additional workplace stressor. IENs view this discrimination as an obstacle to career advancement and professional recognition. Consequences of workplace discrimination affect IENs' physical and psychological well being, the quality of patient care, and healthcare organizational costs. In anticipation of future nursing shortages, understanding and minimizing workplace discrimination will benefit nurses, patients, and healthcare organizations. In this article the author addresses motivation and challenges associated with international nurse migration and immigration, relates these challenges to Roy's theoretical framework, describes workplace discrimination, and reviews both consequences of and evidence for workplace discrimination. Next, she considers the significance of this discrimination for healthcare agencies, and approaches for decreasing stress for IENs during their transition process. She concludes that workplace discrimination has a negative, multifaceted effect on both professional nursing and healthcare organizations. Support measures developed to promote mutual respect among all nurses are presented. PMID:26882517

  4. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

    2003-01-30

    This is the second quarterly progress report for Year-4 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between October 1, 2002 and December 30, 2002. This report presents a review of progress on the following specific tasks. (a) Design and development of an Advanced Cuttings Transport Facility Task 3: Addition of a Cuttings Injection/Separation System, Task 4: Addition of a Pipe Rotation System. (b) New research project (Task 9b): ''Development of a Foam Generator/Viscometer for Elevated Pressure and Elevated Temperature (EPET) Conditions''. (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''. (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b). (f) New Research project (Task 13): ''Study of Cuttings Transport with Foam under Elevated Pressure and Temperature Conditions''. (g) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (h) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  5. Recent Advances in Tumor Ablation for Hepatocellular Carcinoma

    PubMed Central

    Kang, Tae Wook; Rhim, Hyunchul

    2015-01-01

    Image-guided tumor ablation for early stage hepatocellular carcinoma (HCC) is an accepted non-surgical treatment that provides excellent local tumor control and favorable survival benefit. This review summarizes the recent advances in tumor ablation for HCC. Diagnostic imaging and molecular biology of HCC has recently undergone marked improvements. Second-generation ultrasonography (US) contrast agents, new computed tomography (CT) techniques, and liver-specific contrast agents for magnetic resonance imaging (MRI) have enabled the early detection of smaller and inconspicuous HCC lesions. Various imaging-guidance tools that incorporate imaging-fusion between real-time US and CT/MRI, that are now common for percutaneous tumor ablation, have increased operator confidence in the accurate targeting of technically difficult tumors. In addition to radiofrequency ablation (RFA), various therapeutic modalities including microwave ablation, irreversible electroporation, and high-intensity focused ultrasound ablation have attracted attention as alternative energy sources for effective locoregional treatment of HCC. In addition, combined treatment with RFA and chemoembolization or molecular agents may be able to overcome the limitation of advanced or large tumors. Finally, understanding of the biological mechanisms and advances in therapy associated with tumor ablation will be important for successful tumor control. All these advances in tumor ablation for HCC will result in significant improvement in the prognosis of HCC patients. In this review, we primarily focus on recent advances in molecular tumor biology, diagnosis, imaging-guidance tools, and therapeutic modalities, and refer to the current status and future perspectives for tumor ablation for HCC. PMID:26674766

  6. Recent Advances in Tumor Ablation for Hepatocellular Carcinoma.

    PubMed

    Kang, Tae Wook; Rhim, Hyunchul

    2015-09-01

    Image-guided tumor ablation for early stage hepatocellular carcinoma (HCC) is an accepted non-surgical treatment that provides excellent local tumor control and favorable survival benefit. This review summarizes the recent advances in tumor ablation for HCC. Diagnostic imaging and molecular biology of HCC has recently undergone marked improvements. Second-generation ultrasonography (US) contrast agents, new computed tomography (CT) techniques, and liver-specific contrast agents for magnetic resonance imaging (MRI) have enabled the early detection of smaller and inconspicuous HCC lesions. Various imaging-guidance tools that incorporate imaging-fusion between real-time US and CT/MRI, that are now common for percutaneous tumor ablation, have increased operator confidence in the accurate targeting of technically difficult tumors. In addition to radiofrequency ablation (RFA), various therapeutic modalities including microwave ablation, irreversible electroporation, and high-intensity focused ultrasound ablation have attracted attention as alternative energy sources for effective locoregional treatment of HCC. In addition, combined treatment with RFA and chemoembolization or molecular agents may be able to overcome the limitation of advanced or large tumors. Finally, understanding of the biological mechanisms and advances in therapy associated with tumor ablation will be important for successful tumor control. All these advances in tumor ablation for HCC will result in significant improvement in the prognosis of HCC patients. In this review, we primarily focus on recent advances in molecular tumor biology, diagnosis, imaging-guidance tools, and therapeutic modalities, and refer to the current status and future perspectives for tumor ablation for HCC. PMID:26674766

  7. Ceramic technology for Advanced Heat Engines Project

    SciTech Connect

    Johnson, D.R.

    1991-07-01

    Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. This project is managed by ORNL for the Office of Transportation Technologies, Office of Transportation Materials, and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DOD, and industry.

  8. Image stabilization for SWIR advanced optoelectronic device

    NASA Astrophysics Data System (ADS)

    Schiopu, Paul; Manea, Adrian; Cristea, Ionica; Grosu, Neculai; Craciun, Anca-Ileana; Craciun, Alexandru; Granciu, Dana

    2015-02-01

    At long ranges and under low visibility conditions, Advanced Optoelectronic Device provides the signal-to-noise ratio and image quality in the Short-wave Infra-red - SWIR (wavelengths between 1,1 ÷2,5 μm), significantly better than in the near wave infrared - NWIR and visible spectral bands [1,2]. The quality of image is nearly independent of the polarization in the incoming light, but it is influenced by the relative movement between the optical system and the observer (the operators' handshake), and the movement towards the support system (land and air vehicles). All these make it difficult to detect objectives observation in real time. This paper presents some systems enhance which the ability of observation and sighting through the optical systems without the use of the stands, tripods or other means. We have to eliminate the effect of "tremors of the hands" and the vibration in order to allow the use of optical devices by operators on the moving vehicles on land, on aircraft, or on boats, and to provide additional comfort for the user to track the moving object through the optical system, without losing the control in the process of detection and tracking. The practical applications of stabilization image process, in SWIR, are the most advanced part of the optical observation systems available worldwide [3,4,5]. This application has a didactic nature, because it ensures understanding by the students about image stabilization and their participation in research.

  9. From conventional to advanced environmental sanitation.

    PubMed

    Schertenleib, R

    2005-01-01

    The basic concept of collecting domestic liquid waste in water-borne sewer systems goes back more than 100 years and became in the last century the conventional approach to sanitation in urban areas. Over the years, these sewage disposal systems had to be successively upgraded by additional sewage treatment plants increasing investment, operating and maintenance costs. Although these conventional sanitation systems could improve significantly the public health situation in those countries who could afford to install and operate them, it is highly questionable, if they are economically and ecologically sustainable. The large number of people in the developing world who still do not have access to adequate sanitation is a clear indication that the conventional approach to sanitation is not adapted to the socio-economic condition prevailing in most countries of Africa, Asia and Latin America. Advanced environmental sanitation is aiming not only to protect public health and the integrity of aquatic ecosystems but also to conserve precious freshwater and non-renewable resources. The Bellagio Principles and the Household Centred Environmental Sanitation Approach (HCES) are suggested as guiding principles and a new approach for planing and designing advanced (sustainable) environmental sanitation systems. PMID:16104400

  10. Advanced subsystems development

    NASA Technical Reports Server (NTRS)

    Livingston, F. R.

    1978-01-01

    The concept design for a small (less than 10 MWe) solar thermal electric generating plant was completed using projected 1985 technology. The systems requirements were defined and specified. The components, including an engineering prototype for one 15 kWe module of the generating plant, were conceptually designed. Significant features of the small solar thermal power plant were identified as the following: (1) 15 kWe Stirling-cycle engine/alternator with constant power output; (2) 10 meter point-focusing paraboloidal concentrator with cantilevered cellular glass reflecting panels; (3) primary heat pipe with 800 C output solar cavity receiver; (4) secondary heat pipe with molten salt thermal energy storage unit; (5) electric energy transport system; and (6) advanced battery energy storage capability.

  11. Evaluation of Additively Manufactured Metals for Use in Oxygen Systems Project

    NASA Technical Reports Server (NTRS)

    Tylka, Jonathan; Cooper, Ken; Peralta, Stephen; Wilcutt, Terrence; Hughitt, Brian; Generazio, Edward

    2016-01-01

    Space Launch System, Commercial Resupply, and Commercial Crew programs have published intent to use additively manufactured (AM) components in propulsion systems and are likely to include various life support systems in the future. Parts produced by these types of additive manufacturing techniques have not been fully evaluated for use in oxygen systems and the inherent risks have not been fully identified. Some areas of primary concern in the SLS process with respect to oxygen compatibility may be the porosity of the printed parts, fundamental differences in microstructure of an AM part as compared to traditional materials, or increased risk of shed metal particulate into an oxygen system. If an ignition were to occur the printed material could be more flammable than components manufactured from a traditional billet of raw material and/or present a significant hazards if not identified and rigorously studied in advance of implementation into an oxygen system.

  12. Advances in brain imaging: a new ethical challenge.

    PubMed

    Alfano, B; Brunetti, A

    1997-01-01

    Technical advances in the past 25 years permitted substantial advances in the neuroimaging field, expanding the diagnostic and research potentials and significantly reducing the use of old invasive imaging techniques for research purposes. The safer procedures now available allow acquisition of reference data, morphological assessment and functional characterisation from healthy volunteers. However, enrollment of volunteers is still a sensitive ethical issue. Ethical problems related to informed consent, for both research and diagnostic procedures, in patients with neuropsychiatric disorders represent an additional crucial issue. Furthermore, with both functional and structural neuroimaging studies, there is a theoretical risk of violation of individual privacy. Research in the neuroimaging field should tend to increase the amount of information obtained through appropriate post-processing procedures, including multimodality image fusion, and to limit stress and discomfort. PMID:9616958

  13. Advanced Gasoline Turbocharged Direction Injection (GTDI) Engine Development

    SciTech Connect

    Wagner, Terrance

    2015-12-31

    This program was undertaken in response to US Department of Energy Solicitation DE-FOA-0000079, resulting in a cooperative agreement with Ford and MTU to demonstrate improvement of fuel efficiency in a vehicle equipped with an advanced GTDI engine. Ford Motor Company has invested significantly in GTDI engine technology as a cost effective, high volume, fuel economy solution, marketed globally as EcoBoost technology. Ford envisions additional fuel economy improvement in the medium and long term by further advancing EcoBoost technology. The approach for the project was to engineer a comprehensive suite of gasoline engine systems technologies to achieve the project objectives, and to progressively demonstrate the objectives via concept analysis / computer modeling, single-cylinder and multi-cylinder engine testing on engine dynamometer, and vehicle level testing on chassis rolls.

  14. Advance techniques for monitoring human tolerance to positive Gz accelerations

    NASA Technical Reports Server (NTRS)

    Pelligra, R.; Sandler, H.; Rositano, S.; Skrettingland, K.; Mancini, R.

    1973-01-01

    Tolerance to positive g accelerations was measured in ten normal male subjects using both standard and advanced techniques. In addition to routine electrocardiogram, heart rate, respiratory rate, and infrared television, monitoring techniques during acceleration exposure included measurement of peripheral vision loss, noninvasive temporal, brachial, and/or radial arterial blood flow, and automatic measurement of indirect systolic and diastolic blood pressure at 60-sec intervals. Although brachial and radial arterial flow measurements reflected significant cardiovascular changes during and after acceleration, they were inconsistent indices of the onset of grayout or blackout. Temporal arterial blood flow, however, showed a high correlation with subjective peripheral light loss.

  15. Nivolumab: A Review in Advanced Melanoma.

    PubMed

    Scott, Lesley J

    2015-08-01

    An improved understanding of cancer genetics and immune regulatory pathways, including those associated with evasion of immune surveillance by tumours, has culminated in the development of several targeted therapies. One such strategy that acts to negate evasion of immune surveillance by tumours is inhibition of the programmed cell death receptor-1 (PD-1) checkpoint pathway. Intravenous nivolumab (Opdivo(®)), a PD-1 checkpoint inhibitor, is approved or in pre-registration in various countries for use in adult patients with advanced melanoma, with the recommended monotherapy dosage being a 60-min infusion of 3 mg/kg once every 2 weeks. In well-designed multinational trials, as monotherapy or in combination with ipilimumab (a cytotoxic T-lymphocyte antigen 4 checkpoint inhibitor), nivolumab significantly improved clinical outcomes and had a manageable tolerability profile in adult patients with advanced melanoma with or without BRAF mutations. Nivolumab monotherapy was associated with a higher objective response rate (ORR) than chemotherapy in treatment-experienced patients and a higher ORR and prolonged progression-free survival (PFS) and overall survival than dacarbazine in treatment-naive patients. In combination with ipilimumab, nivolumab was associated with an improved ORR and prolonged PFS compared with ipilimumab monotherapy in treatment-naive patients. In addition, nivolumab monotherapy significantly prolonged PFS and improved ORRs compared with ipilimumab monotherapy. The optimal combination regimen for immune checkpoint inhibitors remains to be fully elucidated, with various combination regimens and different sequences of individual immunotherapies currently being investigated in ongoing clinical trials. Given the significant improvements in outcomes associated with nivolumab in clinical trials, nivolumab monotherapy or combination therapy is a valuable first-line or subsequent treatment option for adult patients with unresectable or metastatic melanoma

  16. Risk assessment for organic trace compounds in wastewater: comparison of conventional and advanced treatment.

    PubMed

    Schwätter, F; Hannich, C B; Nöthe, T; Oehlmann, J; Fahlenkamp, H

    2007-01-01

    The elimination of organic trace compounds in municipal wastewater was analysed at three German wastewater treatment plants. Additionally, the effects of advanced treatment, membrane filtration, adsorption and oxidation processes were investigated. To assess the ecotoxicity of effluents, a number of tools were used: substance-specific evaluation, case studies for combined effects and risk assessment on the basis of cumulative parameters. The results of the research projects revealed that aquatic environmental risks can be reduced significantly using advanced treatment technologies for wastewater treatment plants. PMID:17881832

  17. Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery

    NASA Astrophysics Data System (ADS)

    Harrysson, Ola L. A.; Marcellin-Little, Denis J.; Horn, Timothy J.

    2015-03-01

    Veterinary medicine has undergone a rapid increase in specialization over the last three decades. Veterinarians now routinely perform joint replacement, neurosurgery, limb-sparing surgery, interventional radiology, radiation therapy, and other complex medical procedures. Many procedures involve advanced imaging and surgical planning. Evidence-based medicine has also become part of the modus operandi of veterinary clinicians. Modeling and additive manufacturing can provide individualized or customized therapeutic solutions to support the management of companion animals with complex medical problems. The use of metal additive manufacturing is increasing in veterinary orthopedic surgery. This review describes and discusses current and potential applications of metal additive manufacturing in veterinary orthopedic surgery.

  18. Theoretical and experimental investigation of additive drag

    NASA Technical Reports Server (NTRS)

    Sibulkin, Merwin

    1954-01-01

    The significance of additive drag is discussed and equations for determining its approximate value are derived for annular and open-nose inlets. Charts are presented giving values of additive drag coefficient over a range of free-stream Mach numbers for open and for annular-nose inlets with conical flow at the inlet. The effects on additive drag of variable inlet-total-pressure recovery and static pressures on the centerbody are investigated and an analytical method of predicting the variation of pressure on the centerbody with mass-flow ratio is given. Experimental additive-drag values are presented for a series of 20 degree and 25 degree cone half-angle inlets and one open-nose inlet operating at free-stream Mach numbers of 1.8 and 1.6. A comparison with the theoretical values of additive drag shows excellent agreement for the open-nose inlet and moderately good agreement for the annular inlets. (author)

  19. A SIGNIFICANCE TEST FOR THE LASSO1

    PubMed Central

    Lockhart, Richard; Taylor, Jonathan; Tibshirani, Ryan J.; Tibshirani, Robert

    2014-01-01

    In the sparse linear regression setting, we consider testing the significance of the predictor variable that enters the current lasso model, in the sequence of models visited along the lasso solution path. We propose a simple test statistic based on lasso fitted values, called the covariance test statistic, and show that when the true model is linear, this statistic has an Exp(1) asymptotic distribution under the null hypothesis (the null being that all truly active variables are contained in the current lasso model). Our proof of this result for the special case of the first predictor to enter the model (i.e., testing for a single significant predictor variable against the global null) requires only weak assumptions on the predictor matrix X. On the other hand, our proof for a general step in the lasso path places further technical assumptions on X and the generative model, but still allows for the important high-dimensional case p > n, and does not necessarily require that the current lasso model achieves perfect recovery of the truly active variables. Of course, for testing the significance of an additional variable between two nested linear models, one typically uses the chi-squared test, comparing the drop in residual sum of squares (RSS) to a χ12 distribution. But when this additional variable is not fixed, and has been chosen adaptively or greedily, this test is no longer appropriate: adaptivity makes the drop in RSS stochastically much larger than χ12 under the null hypothesis. Our analysis explicitly accounts for adaptivity, as it must, since the lasso builds an adaptive sequence of linear models as the tuning parameter λ decreases. In this analysis, shrinkage plays a key role: though additional variables are chosen adaptively, the coefficients of lasso active variables are shrunken due to the l1 penalty. Therefore, the test statistic (which is based on lasso fitted values) is in a sense balanced by these two opposing properties—adaptivity and

  20. Advanced Power Electronics Components

    NASA Technical Reports Server (NTRS)

    Schwarze, Gene E.

    2004-01-01

    This paper will give a description and status of the Advanced Power Electronics Materials and Components Technology program being conducted by the NASA Glenn Research Center for future aerospace power applications. The focus of this research program is on the following: 1) New and/or significantly improved dielectric materials for the development of power capacitors with increased volumetric efficiency, energy density, and operating temperature. Materials being investigated include nanocrystalline and composite ceramic dielectrics and diamond-like carbon films; 2) New and/or significantly improved high frequency, high temperature, low loss soft magnetic materials for the development of transformers/inductors with increased power/energy density, electrical efficiency, and operating temperature. Materials being investigated include nanocrystalline and nanocomposite soft magnetic materials; 3) Packaged high temperature, high power density, high voltage, and low loss SiC diodes and switches. Development of high quality 4H- and 6H- SiC atomically smooth substrates to significantly improve device performance is a major emphasis of the SiC materials program; 4) Demonstration of high temperature (> 200 C) circuits using the components developed above.

  1. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  2. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  3. Additive manufacturing of hybrid circuits

    DOE PAGESBeta

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  4. Advances in Understanding the Biosynthesis of Fumonisins

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fumonisins are a group of economically important mycotoxins that are derived polyketides. Since the cloning of the fumonisin polyketide synthase (PKS) gene from Fusarium verticillioides in 1999, significant advances have been made in understanding the molecular mechanisms for fumonisin biosynthesis...

  5. ADVANCES IN PARTICLE SAMPLING AND MEASUREMENT

    EPA Science Inventory

    The paper, by five authorities who contributed significantly to the second symposium on advances to particle sampling and measurement (October 1979 in Daytona Beach, FL) summarizes salient developments in the field. Current techniques were described as being expensive, complicate...

  6. Plans for Advanced LIGO Instruments

    NASA Astrophysics Data System (ADS)

    Wilkinson, Carol

    2005-04-01

    The proposed Advanced LIGO detector will have an increase in sensitivity over initial LIGO by a factor of ten, with an increased bandwidth in the region of highest sensitivity and the ability to tune for specific astrophysical sources. Advanced LIGO will achieve the equivalent of the one-year integrated observation time of initial LIGO in just several hours, allowing observation of astrophysical gravitational waves on a regular basis. The Advanced LIGO detector will replace the existing detector at the LIGO Observatories while retaining the existing building and vacuum system infrastructure. The new instruments build on the initial LIGO Fabry-Perot Michelson Interferometer layout and take advantage of significant advances in technology since the design of initial LIGO in the 1990's. Signal strength/sensitivity will be improved by increasing the laser power, lowering optical absorption, and adding signal recycling to the Fabry-Perot arm cavities. Stray forces on the test masses will be controlled by reducing thermal noise sources in the suspensions and optics and using a multi-staged seismic isolation system with inertial sensing and feedback control. The LIGO laboratory, the LIGO Science Collaboration, and international partners have undertaken a structured program of research and development, including testing of full-scale prototypes in context. Significant progress has been made on several of the detector subsystems. The Advanced LIGO project has been through National Science Foundation peer review and the National Science Board has recommended it for funding. Based on a proposed funding start in 2007, detector installation will begin in 2010, with observations at an advanced level of commissioning in 2013.

  7. Issues affecting advanced passive light-water reactor safety analysis

    SciTech Connect

    Beelman, R.J.; Fletcher, C.D.; Modro, S.M.

    1992-08-01

    Next generation commercial reactor designs emphasize enhanced safety through improved safety system reliability and performance by means of system simplification and reliance on immutable natural forces for system operation. Simulating the performance of these safety systems will be central to analytical safety evaluation of advanced passive reactor designs. Yet the characteristically small driving forces of these safety systems pose challenging computational problems to current thermal-hydraulic systems analysis codes. Additionally, the safety systems generally interact closely with one another, requiring accurate, integrated simulation of the nuclear steam supply system, engineered safeguards and containment. Furthermore, numerical safety analysis of these advanced passive reactor designs wig necessitate simulation of long-duration, slowly-developing transients compared with current reactor designs. The composite effects of small computational inaccuracies on induced system interactions and perturbations over long periods may well lead to predicted results which are significantly different than would otherwise be expected or might actually occur. Comparisons between the engineered safety features of competing US advanced light water reactor designs and analogous present day reactor designs are examined relative to the adequacy of existing thermal-hydraulic safety codes in predicting the mechanisms of passive safety. Areas where existing codes might require modification, extension or assessment relative to passive safety designs are identified. Conclusions concerning the applicability of these codes to advanced passive light water reactor safety analysis are presented.

  8. Issues affecting advanced passive light-water reactor safety analysis

    SciTech Connect

    Beelman, R.J.; Fletcher, C.D.; Modro, S.M.

    1992-01-01

    Next generation commercial reactor designs emphasize enhanced safety through improved safety system reliability and performance by means of system simplification and reliance on immutable natural forces for system operation. Simulating the performance of these safety systems will be central to analytical safety evaluation of advanced passive reactor designs. Yet the characteristically small driving forces of these safety systems pose challenging computational problems to current thermal-hydraulic systems analysis codes. Additionally, the safety systems generally interact closely with one another, requiring accurate, integrated simulation of the nuclear steam supply system, engineered safeguards and containment. Furthermore, numerical safety analysis of these advanced passive reactor designs wig necessitate simulation of long-duration, slowly-developing transients compared with current reactor designs. The composite effects of small computational inaccuracies on induced system interactions and perturbations over long periods may well lead to predicted results which are significantly different than would otherwise be expected or might actually occur. Comparisons between the engineered safety features of competing US advanced light water reactor designs and analogous present day reactor designs are examined relative to the adequacy of existing thermal-hydraulic safety codes in predicting the mechanisms of passive safety. Areas where existing codes might require modification, extension or assessment relative to passive safety designs are identified. Conclusions concerning the applicability of these codes to advanced passive light water reactor safety analysis are presented.

  9. Advance Care Planning

    MedlinePlus

    ... Division of Geriatrics and Clinical Gerontology Division of Neuroscience FAQs Funding Opportunities Intramural Research Program Office of ... Is Advance Care Planning? Advance care planning involves learning about the types of decisions that might need ...

  10. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  11. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  12. 9. SITE MAP HIGHLIGHTING SIGNIFICANT BUILDINGS AND SHOWING LOCATION LOCATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. SITE MAP HIGHLIGHTING SIGNIFICANT BUILDINGS AND SHOWING LOCATION LOCATION OF OUTPATIENT CLINIC ADDITION - U.S. Veterans Administration Medical Center, 600 South Seventieth Street, Lincoln, Lancaster County, NE

  13. 40 CFR 725.950 - Additional recordkeeping requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional Procedures for Reporting on Significant New Uses of Microorganisms § 725.950 Additional recordkeeping requirements. Persons submitting a MCAN for a significant new use of a microorganism must comply with...

  14. 40 CFR 725.950 - Additional recordkeeping requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional Procedures for Reporting on Significant New Uses of Microorganisms § 725.950 Additional recordkeeping requirements. Persons submitting a MCAN for a significant new use of a microorganism must comply with...

  15. Advanced planetary studies

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Results of planetary advanced studies and planning support are summarized. The scope of analyses includes cost estimation research, planetary mission performance, penetrator advanced studies, Mercury mission transport requirements, definition of super solar electric propulsion/solar sail mission discriminators, and advanced planning activities.

  16. Advanced High-Level Waste Glass Research and Development Plan

    SciTech Connect

    Peeler, David K.; Vienna, John D.; Schweiger, Michael J.; Fox, Kevin M.

    2015-07-01

    glass formulations will reduce the cost of Hanford tank waste management by reducing the schedule for tank waste treatment and reducing the amount of HLW glass for storage, transportation, and disposal. Additional benefits will be realized if advanced glasses are developed that demonstrate more tolerance for key components in the waste (such as Al2O3, Cr2O3, SO3 and Na2O) above the currently defined WTP constraints. Tolerating these higher concentrations of key waste loading limiters may reduce the burden on (or even eliminate the need for) leaching to remove Cr and Al and washing to remove excess S and Na from the HLW fraction. Advanced glass formulations may also make direct vitrification of the HLW fraction without significant pretreatment more cost effective. Finally, the advanced glass formulation efforts seek not only to increase waste loading in glass, but also to increase glass production rate. When coupled with higher waste loading, ensuring that all of the advanced glass formulations are processable at or above the current contract processing rate leads to significant improvements in waste throughput (the amount of waste being processed per unit time),which could significantly reduce the overall WTP mission life. The integration of increased waste loading, reduced leaching/washing requirements, and improved melting rates provides a system-wide approach to improve the effectiveness of the WTP process.

  17. Advanced Turbofan Duct Liner Concepts

    NASA Technical Reports Server (NTRS)

    Bielak, Gerald W.; Premo, John W.; Hersh, Alan S.

    1999-01-01

    The Advanced Subsonic Technology Noise Reduction Program goal is to reduce aircraft noise by 10 EPNdB by the year 2000 relative, to 1992 technology. The improvement goal for nacelle attenuation is 25% relative to 1992 technology by 1997 and 50% by 2000. The Advanced Turbofan Duct Liner Concepts Task work by Boeing presented in this document was in support of these goals. The basis for the technical approach was a Boeing study conducted in 1993-94 under NASA/FAA contract NAS1-19349, Task 6, investigating broadband acoustic liner concepts. As a result of this work, it was recommended that linear double layer, linear and perforate triple layer, parallel element, and bulk absorber liners be further investigated to improve nacelle attenuations. NASA LaRC also suggested that "adaptive" liner concepts that would allow "in-situ" acoustic impedance control also be considered. As a result, bias flow and high-temperature liner concepts were also added to the investigation. The major conclusion from the above studies is that improvements in nacelle liner average acoustic impedance characteristics alone will not result in 25% increased nacelle noise reduction relative to 1992 technology. Nacelle design advancements currently being developed by Boeing are expected to add 20-40% more acoustic lining to hardwall regions in current inlets, which is predicted to result in and additional 40-80% attenuation improvement. Similar advancements are expected to allow 10-30% more acoustic lining in current fan ducts with 10-30% more attenuation expected. In addition, Boeing is currently developing a scarf inlet concept which is expected to give an additional 40-80% attenuation improvement for equivalent lining areas.

  18. Additional evidence of Mercurian volcanism

    USGS Publications Warehouse

    Trask, N.J.; Strom, R.G.

    1976-01-01

    Evidence concerned with (1) the character and distribution of terrain surrounding fresh basins, (2) albedo, color and temporal differences between a basin rim and smooth plains on its floor, and (3) the stratigraphic relations and local distribution of smooth plains in the hilly and lineated terrain are cited as additional evidence for an internal origin of much of the Mercurian smooth plains. Altough the question of Mercurian volcanism should be kept open, this evidence together with that presented in an earlier paper suggests that volcanism occurred on Mercury early in its history. ?? 1976.

  19. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  20. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  1. Advanced midwifery practice or advancing midwifery practice?

    PubMed

    Smith, Rachel; Leap, Nicky; Homer, Caroline

    2010-09-01

    Advanced midwifery practice is a controversial notion in midwifery, particularly at present in Australia. The proposed changes in legislation around access to the publicly funded Medical Benefits Scheme (MBS) and the Pharmaceutical Benefits Scheme (PBS) in 2009-2010 have meant that the issue of advanced midwifery practice has again taken prominence. Linking midwifery access to MBS and PBS to a safety and quality framework that includes an 'advanced midwifery credentialling framework' is particularly challenging. The Haxton and Fahy paper in the December 2009 edition of Women and Birth is timely as it enables a reflection upon these issues and encourages debate and discussion about exactly what is midwifery, what are we educating our students for and is working to the full scope of practice practising at advanced level? This paper seeks to address some of these questions and open up the topic for further debate. PMID:20018582

  2. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  3. High Flow Addition Curing Polyimides

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Vannucci, Raymond D.; Ansari, Irfan; Cerny, Lawrence L.; Scheiman, Daniel A.

    1994-01-01

    A new series of high flow PMR-type addition curing polyimides was developed, which employed the substitution of 2,2'-bis (trifluoromethyl) -4,4'-diaminobiphenyl (BTDB) for p-phenylenediamine (p -PDA) in a PMR-IL formulation. These thermoset polyimides, designated as 12F resins, were prepared from BTDB and the dimethyl ester of 4,4'- (hexafluo- roisopropylidene) -diphthalic acid (HFDE) with either nadic ester (NE) or p-aminostyrene (PAS) as the endcaps for addition curing. The 12F prepolymers displayed lower melting temperatures in DSC analysis, and higher melt flow in rheological studies than the cor- responding PMR-11 polyimides. Long-term isothermal aging studies showed that BTDB- based 12F resins exhibited comparable thermo-oxidative stability to P-PDA based PMR-11 polyimides. The noncoplanar 2- and 2'-disubstituted biphenyldiamine (BTDB) not only lowered the melt viscosities of 12F prepolymers, but also retained reasonable thermal sta- bility of the cured resins. The 12F polyimide resin with p-aminostyrene endcaps showed the best promise for long-term, high-temperature application at 343 C (650 F).

  4. Advanced information society (12)

    NASA Astrophysics Data System (ADS)

    Komatsuzaki, Seisuke

    In this paper, the original Japanese idea of "advanced information society" was reviewed at the first step. Thus, advancement of information/communication technology, advancement of information/communication needs and tendency of industrialization of information" were examined. Next, by comparing studies on advanced information society in various countries, the Japanese characteristics of consensus building was reviewed. Finally, in pursuit of prospect and tasks for the society, advancement of innovation and convergence information/communication technology, information/communication needs, institutional environment for utilization of information/communication and countermeasures against information pollution. Matching of information/communication technology and needs, besides with countermeasures against information pollution were discussed.

  5. Significance of Phi bodies in acute leukaemia.

    PubMed Central

    Cardullo, L de S; Morilla, R; Catovsky, D

    1981-01-01

    Material from 39 patients with acute leukaemia was investigated with the peroxidase cytochemical reaction using 3,3'diaminobenzidine (DAB) and other substrates in order to test their sensitivity in detecting myeloid differentiation. The proportion of positive blasts and of cases with Auer rods in acute myeloid leukaemia (AML) was significantly greater with DAB than with benzidine. In addition, Phi bodies were demonstrated in AML blasts only when DAB was used; Phi bodies were also observed in two out of seven cases of chronic granulocytic leukaemia in "myeloid" blast crisis but were not seen in any case of acute lymphoblastic leukaemia. Phi bodies were more numerous when the reaction was carried out at pH 9.7, and their number was significantly reduced in the presence of 3-amino 1,2,4-triazole. Both findings suggest that the Phi bodies derive from catalase-containing granules (microperoxisomes) and are distinct from Auer rods, which derive from peroxidase-containing (primary) granules. Like Auer rods, Phi bodies appear to be characteristics of immature myeloid cells in leukaemia but are seen with a higher frequency than Auer rods in acute myeloid leukemia. Images p154-a PMID:6262384

  6. Fiber optics for advanced aircraft

    NASA Technical Reports Server (NTRS)

    Baumbick, Robert J.

    1988-01-01

    The increased use of composites makes the digital control more susceptible to electromagnetic effects. In order to provide the protection to the digital control additional shielding will be required as well as protective circuitry for the electronics. This results in increased weight and reduced reliability. The advantages that fiber optic technology provides for advanced aircraft applications is recognized. The use of optical signals to carry information between the aircraft and the control module provides immunity from contamination by electromagnetic sources as well as other important benefits such as reduced weight and volume resulting from the elimination of the shielding and the replacement of metal conductors with low weight glass fibers. In 1975 NASA began work to develop passive optical sensors for use with fiber optics in aircraft control systems. The problem now is to choose the best optical sensor concepts and evaluate them for use. In 1985 NASA and DOD entered into a joint program, Fiber Optic Control System Integration (FOCSI), to look at optical technology specifically for use in advanced aircraft systems. The results of this program are discussed. The conclusion of the study indicated that the use of fiber optic technology in advanced aircraft systems is feasible and desirable. The study pointed to a lack of available sensors from vendors capable of operating in the adverse environments of advanced aircraft.

  7. Fiber optics for advanced aircraft

    NASA Technical Reports Server (NTRS)

    Baumbick, Robert J.

    1989-01-01

    The increased use of composites makes the digital control more susceptible to electromagnetic effects. In order to provide the protection to the digital control additional shielding will be required as well as protective circuitry for the electronics. This results in increased weight and reduced reliability. The advantages that fiber optic technology provides for advanced aircraft applications is recognized. The use of optical signals to carry information between the aircraft and the control module provides immunity from contamination by electromagnetic sources as well as other important benefits such as reduced weight and volume resulting from the elimination of the shielding and the replacement of metal conductors with low weight glass fibers. In 1975 NASA began work to develop passive optical sensors for use with fiber optics in aircraft control systems. The problem now is to choose the best optical sensor concepts and evaluate them for use. In 1985 NASA and DOD entered into a joint program, Fiber Optic Control System Integration (FOCSI), to look at optical technology specifically for use in advanced aircraft systems. The results of this program are discussed. The conclusion of the study indicated that the use of fiber optic technology in advanced aircraft systems is feasible and desirable. The study pointed to a lack of available sensors from vendors capable of operating in the adverse environments of advanced aircraft.

  8. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  9. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  10. Advances in Ureteral Stent Design

    NASA Astrophysics Data System (ADS)

    Denstedt, John D.

    2007-04-01

    Ureteral stents are commonly used in urolithiasis patients for relief of obstruction or in association with stone treatments such as ureteroscopy and extracorporeal shock wave lithotripsy. There are currently many different bulk materials and coatings available for the manufacture of ureteral stents, however the ideal material has yet to be discovered. All potential biomaterials must undergo rigorous physical and biocompatibility testing before commercialization and use in humans. Despite significant advances in basic science research involving biocompatibility issues and biofilm formation, infection and encrustation remain associated with the use of biomaterials in the urinary tract. There have been many significant advances in the design of ureteral stents in recent years and these will be highlighted along with a discussion of future aspects of biomaterials and use of stents in association with urolithiasis.

  11. Advanced Flip Chips in Extreme Temperature Environments

    NASA Technical Reports Server (NTRS)

    Ramesham, Rajeshuni

    2010-01-01

    The use of underfill materials is necessary with flip-chip interconnect technology to redistribute stresses due to mismatching coefficients of thermal expansion (CTEs) between dissimilar materials in the overall assembly. Underfills are formulated using organic polymers and possibly inorganic filler materials. There are a few ways to apply the underfills with flip-chip technology. Traditional capillary-flow underfill materials now possess high flow speed and reduced time to cure, but they still require additional processing steps beyond the typical surface-mount technology (SMT) assembly process. Studies were conducted using underfills in a temperature range of -190 to 85 C, which resulted in an increase of reliability by one to two orders of magnitude. Thermal shock of the flip-chip test articles was designed to induce failures at the interconnect sites (-40 to 100 C). The study on the reliability of flip chips using underfills in the extreme temperature region is of significant value for space applications. This technology is considered as an enabling technology for future space missions. Flip-chip interconnect technology is an advanced electrical interconnection approach where the silicon die or chip is electrically connected, face down, to the substrate by reflowing solder bumps on area-array metallized terminals on the die to matching footprints of solder-wettable pads on the chosen substrate. This advanced flip-chip interconnect technology will significantly improve the performance of high-speed systems, productivity enhancement over manual wire bonding, self-alignment during die joining, low lead inductances, and reduced need for attachment of precious metals. The use of commercially developed no-flow fluxing underfills provides a means of reducing the processing steps employed in the traditional capillary flow methods to enhance SMT compatibility. Reliability of flip chips may be significantly increased by matching/tailoring the CTEs of the substrate

  12. A novel addition polyimide adhesive

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.; Progar, D. J.

    1981-01-01

    An addition polyimide adhesive, LARC 13, was developed which shows promise for bonding both titanium and composites for applications which require service temperatures in excess of 533 K. The LARC 13 is based on an oligomeric bis nadimide containing a meta linked aromatic diamine. The adhesive melts prior to polymerization due to its oligomeric nature, thereby allowing it to be processed at 344 kPa or less. Therefore, LARC 13 is ideal for the bonding of honeycomb sandwich structures. After melting, the resin thermosets during the cure of the nadic endcaps to a highly crosslinked system. Few volatiles are evolved, thus allowing large enclosed structures to be bonded. Preparation of the adhesive as well as bonding, aging, and testing of lap shear and honeycomb samples are discussed.

  13. Optics of progressive addition lenses.

    PubMed

    Sheedy, J E; Buri, M; Bailey, I L; Azus, J; Borish, I M

    1987-02-01

    The optical characteristics of the major progressive addition lenses were measured using an automated lensometer with a specially designed lens holder to simulate eye rotation. Measurements were made every 3 degrees (about 1.5 mm) and graphs of isospherical equivalent lines and isocylinder lines were developed. Generally the near zone of these lenses is narrower and lower than in bifocal or trifocal lenses. Distinct differences exist between the various progressive lenses. The width of the near zone, rate of power progression, amount of unwanted cylinder (level with the distance center), and clarity of the distance zone are compared for the various lenses. The optical measurements demonstrate an apparent trade-off between the size of the cylinder-free area of the lens and the amount of the cylinder. PMID:3826294

  14. Addition polyimide end cap study

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.

    1980-01-01

    The characterization of addition polyimides with various end caps for adhesive applications at 120-250 C environments is discussed. Oligometric polyimides were prepared from 3,3',4,4'-benzophenone tetracarboxylic dianhydride and 3,3'-methylenedianiline which were end-capped with functionally reactive moities which cause crosslinking when the oligomers are heated to 200-400 C. The syntheses of the oligomers are outlined. The thermolysis of the oligomers was studied by differential scanning calorimetry and the resulting polymers were characterized by differential thermal analysis and adhesive performance. The adhesive data include lap shear strengths on titanium 6-4 adherends both before and after aging for 1000 hours at 121 C and/or 232 C.

  15. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  16. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  17. SIPSEY WILDERNESS AND ADDITIONS, ALABAMA.

    USGS Publications Warehouse

    Schweinfurth, Stanley P.; Mory, Peter C.

    1984-01-01

    On the basis of geologic, geochemical, and mineral surveys the Sipsey Wilderness and additions are deemed to have little promise for the occurrence of metallic mineral resources. Although limestone, shale, and sandstone resources that occur in the area are physically suitable for a variety of uses, similar materials are available outside the area closer to transportation routes and potential markets. A small amount of coal has been identified in the area, occurring as nonpersistent beds less than 28 in. thick. Oil and (or) natural gas resources may be present if suitable structural traps exist in the subsurface. Therefore, the area has a probable oil and gas potential. Small amounts of asphaltic sandstone and limestone, commonly referred to as tar sands, may also occur in the subsurface. 5 refs.

  18. Adverse reactions to food additives.

    PubMed

    Simon, R A

    1986-01-01

    There are thousands of agents that are intentionally added to the food that we consume. These include preservatives, stabilizers, conditioners, thickeners, colorings, flavorings, sweeteners, antioxidants, etc. etc. Yet only a surprisingly small number have been associated with hypersensitivity reactions. Amongst all the additives, FD&C dyes have been most frequently associated with adverse reactions. Tartrazine is the most notorious of them all; however, critical review of the medical literature and current Scripps Clinic studies would indicate that tartrazine has been confirmed to be at best only occasionally associated with flares of urticaria or asthma. There is no convincing evidence in the literature of reactivity to the other azo or nonazo dyes. This can also be said of BHA/BHT, nitrites/nitrates and sorbates. Parabens have been shown to elicit IgE mediated hypersensitivity reactions when used as pharmaceutical preservatives; however, as with the other additives noted above, ingested parabens have only occasionally been associated with adverse reactions. MSG, the cause of the 'Chinese restaurant syndrome' has only been linked to asthma in one report. Sulfiting agents used primarily as food fresheners and to control microbial growth in fermented beverages have been established as the cause of any where from mild to severe and even fatal reactions in at least 5% of the asthmatic population. Other reactions reported to follow sulfite ingestion include anaphylaxis, gastro intestinal complaints and dermatological eruptions. The prevalence of these non asthmatic reactions is unknown. The mechanism of sulfite sensitive asthma is also unknown but most likely involves hyperreactivity to inhale SO2 in the great majority of cases; however, there are reports of IgE mediated reactions and other sulfite sensitive asthmatics have been found with low levels of sulfite oxidase; necessary to oxidize endogenous sulfite to sulfate. PMID:3302664

  19. Carbon additions and grain defect formation in directionally solidified nickel-base superalloys

    NASA Astrophysics Data System (ADS)

    Tin, Sammy

    Over the past fifty years, technological advances leading up to the development of modern high-performance turbine engines for aircraft and power generation applications have coincided with significant engineering accomplishments in the area of Ni-base superalloy metallurgy. As the levels of refractory alloying additions to these Ni-base superalloys increase to enhance high-temperature mechanical properties, grain defect formation, particularly the development of freckle chains, during directional solidification has become an increasingly important problem. In this dissertation, the effect of carbon additions on the solidification characteristics of single crystal Ni-base superalloys has been investigated over a wide range of composition. Using statistically designed experiments, carbon additions of 0.1 to 0.125 wt. % were shown to be beneficial in stabilizing against the formation of grain defects due to thermosolutal convective instabilities. Detailed analyses were performed on the single crystal castings to identify the underlying mechanisms by which the carbon additions improve the solidification characteristics. In addition to forming Ta-rich MC carbides during solidification, the carbon additions were also revealed to influence the segregation behavior of the constituent elements in a manner that was beneficial in suppressing the formation of freckle defects during solidification. Using a segregation mapping technique, less segregation of rhenium, tungsten and tantalum was measured in the carbon containing alloys. Carbide formation during solidification was studied using differential thermal analysis. The influence of carbon additions on the solidification characteristics of the experimental single crystal alloys was assessed using a dimensionless Rayleigh analysis. Based on these analyses, the physical presence of carbides during the initial stages of solidification was also shown to inhibit the formation of freckle defects. In this investigation, carbon

  20. Recent Advances in Agglomerated Multigrid

    NASA Technical Reports Server (NTRS)

    Nishikawa, Hiroaki; Diskin, Boris; Thomas, James L.; Hammond, Dana P.

    2013-01-01

    We report recent advancements of the agglomerated multigrid methodology for complex flow simulations on fully unstructured grids. An agglomerated multigrid solver is applied to a wide range of test problems from simple two-dimensional geometries to realistic three- dimensional configurations. The solver is evaluated against a single-grid solver and, in some cases, against a structured-grid multigrid solver. Grid and solver issues are identified and overcome, leading to significant improvements over single-grid solvers.

  1. Advanced Performance Hydraulic Wind Energy

    NASA Technical Reports Server (NTRS)

    Jones, Jack A.; Bruce, Allan; Lam, Adrienne S.

    2013-01-01

    The Jet Propulsion Laboratory, California Institute of Technology, has developed a novel advanced hydraulic wind energy design, which has up to 23% performance improvement over conventional wind turbine and conventional hydraulic wind energy systems with 5 m/sec winds. It also has significant cost advantages with levelized costs equal to coal (after carbon tax rebate). The design is equally applicable to tidal energy systems and has passed preliminary laboratory proof-of-performance tests, as funded by the Department of Energy.

  2. Advanced burner test reactor preconceptual design report.

    SciTech Connect

    Chang, Y. I.; Finck, P. J.; Grandy, C.; Cahalan, J.; Deitrich, L.; Dunn, F.; Fallin, D.; Farmer, M.; Fanning, T.; Kim, T.; Krajtl, L.; Lomperski, S.; Moisseytsev, A.; Momozaki, Y.; Sienicki, J.; Park, Y.; Tang, Y.; Reed, C.; Tzanos, C; Wiedmeyer, S.; Yang, W.; Chikazawa, Y.; JAEA

    2008-12-16

    advanced fuel cycle; (2) To qualify the transuranics-containing fuels and advanced structural materials needed for a full-scale ABR; and (3) To support the research, development and demonstration required for certification of an ABR standard design by the U.S. Nuclear Regulatory Commission. The ABTR should also address the following additional objectives: (1) To incorporate and demonstrate innovative design concepts and features that may lead to significant improvements in cost, safety, efficiency, reliability, or other favorable characteristics that could promote public acceptance and future private sector investment in ABRs; (2) To demonstrate improved technologies for safeguards and security; and (3) To support development of the U.S. infrastructure for design, fabrication and construction, testing and deployment of systems, structures and components for the ABRs. Based on these objectives, a pre-conceptual design of a 250 MWt ABTR has been developed; it is documented in this report. In addition to meeting the primary and additional objectives listed above, the lessons learned from fast reactor programs in the U.S. and worldwide and the operating experience of more than a dozen fast reactors around the world, in particular the Experimental Breeder Reactor-II have been incorporated into the design of the ABTR to the extent possible.

  3. Low speed propellers: Impact of advanced technologies

    NASA Technical Reports Server (NTRS)

    Keiter, I. D.

    1980-01-01

    Sensitivity studies performed to evaluate the potential of several advanced technological elements on propeller performance, noise, weight, and cost for general aviation aircraft are discussed. Studies indicate that the application of advanced technologies to general aviation propellers can reduce fuel consumption in future aircraft an average of ten percent, meeting current regulatory noise limits. Through the use of composite blade construction, up to 25 percent propeller weight reduction can be achieved. This weight reduction in addition to seven percent propeller efficiency improvements through application of advanced technologies result in four percent reduction in direct operating costs, ten percent reduction in aircraft acquisition cost, and seven percent lower gross weight for general aviation aircraft.

  4. Enhancer additivity and non-additivity are determined by enhancer strength in the Drosophila embryo

    PubMed Central

    Bothma, Jacques P; Garcia, Hernan G; Ng, Samuel; Perry, Michael W; Gregor, Thomas; Levine, Michael

    2015-01-01

    Metazoan genes are embedded in a rich milieu of regulatory information that often includes multiple enhancers possessing overlapping activities. In this study, we employ quantitative live imaging methods to assess the function of pairs of primary and shadow enhancers in the regulation of key patterning genes-knirps, hunchback, and snail-in developing Drosophila embryos. The knirps enhancers exhibit additive, sometimes even super-additive activities, consistent with classical gene fusion studies. In contrast, the hunchback enhancers function sub-additively in anterior regions containing saturating levels of the Bicoid activator, but function additively in regions where there are diminishing levels of the Bicoid gradient. Strikingly sub-additive behavior is also observed for snail, whereby removal of the proximal enhancer causes a significant increase in gene expression. Quantitative modeling of enhancer–promoter interactions suggests that weakly active enhancers function additively while strong enhancers behave sub-additively due to competition with the target promoter. DOI: http://dx.doi.org/10.7554/eLife.07956.001 PMID:26267217

  5. Additive Manufacturing: Making Imagination the Major Limitation

    NASA Astrophysics Data System (ADS)

    Zhai, Yuwei; Lados, Diana A.; LaGoy, Jane L.

    2014-05-01

    Additive manufacturing (AM) refers to an advanced technology used for the fabrication of three-dimensional near-net-shaped functional components directly from computer models, using unit materials. The fundamentals and working principle of AM offer several advantages, including near-net-shape capabilities, superior design and geometrical flexibility, innovative multi-material fabrication, reduced tooling and fixturing, shorter cycle time for design and manufacturing, instant local production at a global scale, and material, energy, and cost efficiency. Well suiting the requests of modern manufacturing climate, AM is viewed as the new industrial revolution, making its way into a continuously increasing number of industries, such as aerospace, defense, automotive, medical, architecture, art, jewelry, and food. This overview was created to relate the historical evolution of the AM technology to its state-of-the-art developments and emerging applications. Generic thoughts on the microstructural characteristics, properties, and performance of AM-fabricated materials will also be discussed, primarily related to metallic materials. This write-up will introduce the general reader to specifics of the AM field vis-à-vis advantages and common techniques, materials and properties, current applications, and future opportunities.

  6. Predicting success on the Advanced Placement Biology Examination

    NASA Astrophysics Data System (ADS)

    Shepherd, Lesa Hanlin

    Four hundred sixty students in four public high schools were used as subjects to determine which of eleven academic and demographic factors studied were significant predictors of success for the Advanced Placement Biology Examination. Factors studied were attendance, class rank, gender, grade level at the time of the examination, grade point average, level of prerequisite biology course, number of Advanced Placement Examinations taken in the year prior to the Advanced Placement Biology Examination, number of Advanced Placement Examinations taken in the same year as the Advanced Placement Biology Examination, proposed major in college, race, and SAT mathematics, verbal, and combined score. Significant relationships were found to exist between the Advanced Placement Biology Examination score and attendance, class rank, gender, grade level at the time of the Advanced Placement Biology Examination, grade point average, number of Advanced Placement Examinations taken in the year prior to the Advanced Placement Biology Examination, number of Advanced Placement Examinations taken in the same year as the Advanced Placement Biology Examination, race, and SAT scores. Significant relationships were not found to exist between Advanced Placement Biology Examination score and level prerequisite biology course and Advanced Placement Biology Examination score and proposed major in college. A multiple regression showed the best combination of predictors to be attendance, SAT verbal score, and SAT mathematics score. Discriminant analysis showed the variables in this study to be good predictors of whether the student would pass the Advanced Placement Biology Examination (score a 3, 4, or 5) or fail the Advanced Placement Biology Examination (score a 1 or 2). These results demonstrated that significant predictors for the Advanced Placement Biology Examination do exist and can be used to assist in the prediction of scores, prediction of passing or failing, the identification of

  7. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

    2000-01-30

    This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

  8. Advanced robot locomotion.

    SciTech Connect

    Neely, Jason C.; Sturgis, Beverly Rainwater; Byrne, Raymond Harry; Feddema, John Todd; Spletzer, Barry Louis; Rose, Scott E.; Novick, David Keith; Wilson, David Gerald; Buerger, Stephen P.

    2007-01-01

    This report contains the results of a research effort on advanced robot locomotion. The majority of this work focuses on walking robots. Walking robot applications include delivery of special payloads to unique locations that require human locomotion to exo-skeleton human assistance applications. A walking robot could step over obstacles and move through narrow openings that a wheeled or tracked vehicle could not overcome. It could pick up and manipulate objects in ways that a standard robot gripper could not. Most importantly, a walking robot would be able to rapidly perform these tasks through an intuitive user interface that mimics natural human motion. The largest obstacle arises in emulating stability and balance control naturally present in humans but needed for bipedal locomotion in a robot. A tracked robot is bulky and limited, but a wide wheel base assures passive stability. Human bipedal motion is so common that it is taken for granted, but bipedal motion requires active balance and stability control for which the analysis is non-trivial. This report contains an extensive literature study on the state-of-the-art of legged robotics, and it additionally provides the analysis, simulation, and hardware verification of two variants of a proto-type leg design.

  9. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

    2002-07-30

    This is the fourth quarterly progress report for Year-3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between April 1, 2002 and June 30, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)''; (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions''; (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''; (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  10. Advanced propeller research

    NASA Technical Reports Server (NTRS)

    Groeneweg, John F.; Bober, Lawrence J.

    1987-01-01

    Resent results of aerodynamic and acoustic research on both single and counter-rotation propellers are reviewed. Data and analytical results are presented for three propellers: SR-7A, the single rotation design used in the NASA Propfan Test Assessment (PTA); and F7-A7, the 8+8 counterrotating design used in the proof-of-concept Unducted Fan (UDF) engine. In addition to propeller efficiencies, cruise and takeoff noise, and blade pressure data, off-design phenomena involving formation of leading edge vortices are described. Aerodynamic and acoustic computational results derived from three-dimensional Euler and acoustic radiation codes are presented. Research on unsteady flows, which are particularly important for understanding counterrotation interaction noise, unsteady loading effects on acoustics, and flutter or forced response is described. The first results of three-dimensional unsteady Euler solutions are illustrated for a single rotation propeller at an angle of attack and for a counterrotation propeller. Basic experimental and theoretical results from studies of the unsteady aerodynamics of oscillating cascades are outlined. Finally, advanced concepts involving swirl recovery vanes and ultra bypass ducted propellers are discussed.

  11. Recent advances in SPECT

    SciTech Connect

    Tsui, Benjamin M. W.

    1998-08-28

    Single photon emission computed tomography (SPECT) is a medical imaging modality that combines conventional nuclear medicine imaging technique and methods of computed tomography (CT). From images that represent the biodistribution of the injected radiopharmaceutical in the patient, SPECT provides functional information that is unique. The first SPECT system was developed in the sixties. However, early progress of SPECT was hampered by the lack of adequate image reconstruction methods. The development of x-ray CT and image reconstruction methods in the seventies spurred a renewed interest in SPECT. In 1981, the first commercial SPECT system based on a single rotating camera was available for clinical use. Today, most modern SPECT systems consist of multiple cameras that rotate around the patients. They have better spatial resolution and higher detection efficiency as compared to the earlier single camera systems. Recently, a new generation of dual camera systems allowing for coincidence imaging of positron emitting radiopharmaceuticals has emerged in the commercial market. Additionally, new quantitative image reconstruction methods are under development. They compensate for image degrading factors including attenuation, collimator-detector blurring and scatter. Also, they result in SPECT images with improved image quality and more accurately represent the three-dimensional radioactivity distribution in the patient. Such advances in radiopharmaceuticals, instrumentation, image reconstruction, compensation methods, and clinical applications have fueled a steady growth of SPECT as an important diagnostic tool in patient management.

  12. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

    2002-04-30

    This is the third quarterly progress report for Year 3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between Jan. 1, 2002 and Mar. 31, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop, progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); and (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  13. 2010 Summary of Advances in Autism Spectrum Disorder Research

    ERIC Educational Resources Information Center

    Interagency Autism Coordinating Committee, 2010

    2010-01-01

    As part of the Combating Autism Act of 2006, the members of the Interagency Autism Coordinating Committee (IACC) are required to develop an annual "Summary of Advances" to describe each year's top advances in autism spectrum disorder (ASD) research. These advances represent significant progress in the early diagnosis of ASD, understanding the…

  14. ADVANCED TECHNOLOGIES FOR STRIPPER GAS WELL ENHANCEMENT

    SciTech Connect

    Ronald J. MacDonald

    2003-04-01

    As part of Task 1 in Advanced Technologies for Stripper Gas Well Enhancement, Schlumberger Data & Consulting Services (DCS) joined with two Appalachian Basin producers, Great Lakes Energy Partners, LLC, and Belden & Blake Corporation to develop methodologies for identification and enhancement of stripper wells with economic upside potential. These industry partners previously provided us with data for more than 700 wells in northwestern Pennsylvania. Phase 1 goals of this project are to develop and validate methodologies that can quickly and cost-effectively identify wells with enhancement potential. We have enhanced and streamlined our software, and we are using the final version of our new Microsoft{trademark} Access/Excel programs. During the last quarter of 2002, we received additional data for approximately 2,200 wells from Great Lakes. This information pertains to their Cooperstown field located in northwestern Pennsylvania. We recognized approximately 130 potential remediation candidates, and Great Lakes' personnel are currently reviewing this list for viable remediation. This field has provided a rigorous test of our software and analytical methods. We have processed all the information provided to us including the Cooperstown data. Great Lakes also provided supplemental data listing the original operator of the wells. We are also determining whether a statistically significant number of underperformers correlate to specific operators and/or their associated completion/stimulation methods. In addition, the DOE has reviewed a draft version of a final report.

  15. ADVANCED TECHNOLOGIES FOR STRIPPER GAS WELL ENHANCEMENT

    SciTech Connect

    Ronald J. MacDonald

    2003-01-01

    As part of Task 1 in Advanced Technologies for Stripper Gas Well Enhancement, Schlumberger Data & Consulting Services (DCS) joined with two Appalachian Basin producers, Great Lakes Energy Partners, LLC, and Belden & Blake Corporation to develop methodologies for identification and enhancement of stripper wells with economic upside potential. These industry partners previously provided us with data for more than 700 wells in northwestern Pennsylvania. Phase 1 goals of this project are to develop and validate methodologies that can quickly and cost-effectively identify wells with enhancement potential. We have enhanced and streamlined our software, and we are using the final version of our new Microsoft{trademark} Access/Excel based software. We have received additional data from Great Lakes pertaining to a Cooperstown field that is expected to have numerous remediation candidates. This field will provide a rigorous test of out software and analytical methods. We have processed all the information provided to us before receiving the Cooperstown data and are currently analyzing the new data. Great Lakes will be providing supplemental data in the near future that will identify the original operator of the wells. This will prove valuable in determining whether a statistically significant number of underperformers are a result of specific operators and their associated completion/stimulation methods. We have identified potential candidate wells for Phase 2 to validate the new methodologies. In addition, a draft version of a final report has been reviewed by DOE.

  16. ADVANCED TECHNOLOGIES FOR STRIPPER GAS WELL ENHANCEMENT

    SciTech Connect

    Ronald J. MacDonald

    2003-04-04

    As part of Task 1 in Advanced Technologies for Stripper Gas Well Enhancement, Schlumberger Data & Consulting Services (DCS) joined with two Appalachian Basin producers, Great Lakes Energy Partners, LLC, and Belden & Blake Corporation to develop methodologies for identification and enhancement of stripper wells with economic upside potential. These industry partners previously provided us with data for more than 700 wells in northwestern Pennsylvania. Phase 1 goals of this project are to develop and validate methodologies that can quickly and cost-effectively identify wells with enhancement potential. We have enhanced and streamlined our software, and we are using the final version of our new Microsoft{trademark} Access/Excel programs. During the last quarter of 2002, we received additional data for approximately 2,200 wells from Great Lakes. This information pertains to their Cooperstown field located in northwestern Pennsylvania. We recognized approximately 130 potential remediation candidates, and Great Lakes' personnel are currently reviewing this list for viable remediation. This field has provided a rigorous test of our software and analytical methods. We have processed all the information provided to us including the Cooperstown data. Great Lakes also provided supplemental data listing the original operator of the wells. We have determined whether a statistically significant number of underperformers correlate to specific operators and/or their associated completion/stimulation methods. In addition, the DOE has reviewed a draft version of a final report.

  17. Advances in Nuclear Monitoring Technologies

    NASA Astrophysics Data System (ADS)

    Park, Brent

    2006-03-01

    Homeland security requires low-cost, large-area detectors for locating and identifying weapons-usable nuclear materials and monitors for radiological isotopes that are more robust than current systems. Recent advances in electronics materials and nanotechnology, specifically organic semiconductors and inorganic quantum dots, offer potential improvements. We provide an overview of the physical processes involved in radiation detection using these new materials in the design of new device structures. Examples include recent efforts on quantum dots, as well as more traditional radiation-detecting materials such as CdZnTe and high-pressure xenon. Detector improvements demand not only new materials but also enhanced data-analysis tools that reduce false alarms and thus increase the quality of decisions. Additional computing power on hand-held platforms should enable the application of advanced algorithms to radiation-detection problems in the field, reducing the need to transmit data and thus delay analysis.

  18. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting. PMID:25500631

  19. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  20. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  1. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  2. Additive attacks on speaker recognition

    NASA Astrophysics Data System (ADS)

    Farrokh Baroughi, Alireza; Craver, Scott

    2014-02-01

    Speaker recognition is used to identify a speaker's voice from among a group of known speakers. A common method of speaker recognition is a classification based on cepstral coefficients of the speaker's voice, using a Gaussian mixture model (GMM) to model each speaker. In this paper we try to fool a speaker recognition system using additive noise such that an intruder is recognized as a target user. Our attack uses a mixture selected from a target user's GMM model, inverting the cepstral transformation to produce noise samples. In our 5 speaker data base, we achieve an attack success rate of 50% with a noise signal at 10dB SNR, and 95% by increasing noise power to 0dB SNR. The importance of this attack is its simplicity and flexibility: it can be employed in real time with no processing of an attacker's voice, and little computation is needed at the moment of detection, allowing the attack to be performed by a small portable device. For any target user, knowing that user's model or voice sample is sufficient to compute the attack signal, and it is enough that the intruder plays it while he/she is uttering to be classiffed as the victim.

  3. Significant technical advances in broadband seismic stations in the Lesser Antilles

    NASA Astrophysics Data System (ADS)

    Anglade, A.; Lemarchand, A.; Saurel, J.-M.; Clouard, V.; Bouin, M.-P.; De Chabalier, J.-B.; Tait, S.; Brunet, C.; Nercessian, A.; Beauducel, F.; Robertson, R.; Lynch, L.; Higgins, M.; Latchman, J.

    2015-04-01

    In the last few years, French West Indies observatories from the Institut de Physique du Globe de Paris (IPGP), in collaboration with The UWI Seismic Research Centre (SRC, University of West Indies), have modernized the Lesser Antilles Arc seismic and deformation monitoring network. 15 new, permanent stations have been installed that strengthen and expand its detection capabilities. The global network of the IPGP-SRC consortium is now composed of 20 modernized stations, all equipped with broadband seismometers, strong motion sensors, Global Positioning System (GPS) sensors and satellite communication for real-time data transfer. To enhance the sensitivity and reduce ambient noise, special efforts were made to improve the design of the seismic vault and the original Stuttgart shielding of the broadband seismometers (240 and 120s corner period). Tests were conducted for several months, involving different types of countermeasures, to achieve the highest performance level of the seismometers. GPS data, realtime and validated seismic data (only broadband) are now available from the IPGP data centre (http://centrededonnees.ipgp.fr/index.php?&lang=EN). This upgraded network feeds the Caribbean Tsunami Warning System supported by UNESCO and establishes a monitoring tool that produces high quality data for studying subduction and volcanic processes in the Lesser Antilles arc.

  4. ADVANCED PROTEOMICS AND BIOINFORMATICS TOOLS IN TOXICOLOGY RESEARCH: OVERCOMING CHALLENGES TO PROVIDE SIGNIFICANT RESULTS

    EPA Science Inventory

    This presentation specifically addresses the advantages and limitations of state of the art gel, protein arrays and peptide-based labeling proteomic approaches to assess the effects of a suite of model T4 inhibitors on the thyroid axis of Xenopus laevis.

  5. The Interrelationships among Science, Art, and Values: Significance for Advancing Holistic Excellence.

    ERIC Educational Resources Information Center

    Erez, Ronny

    2001-01-01

    The Israel Arts and Science Academy for gifted secondary students is described. The goal of the academy is to graduate learners who will apply their gifts to the betterment of the human condition. The Greek ideal of the unity of truth, beauty, and goodness serves as the central curricular force. (Contains three references.) (Author/CR)

  6. Neuroinflammation in advanced canine glaucoma

    PubMed Central

    Jiang, Bing; Harper, Matthew M.; Kecova, Helga; Adamus, Grazyna; Kardon, Randy H.; Grozdanic, Sinisa D.

    2010-01-01

    Purpose The pathophysiological events that occur in advanced glaucoma are not well characterized. The principal purpose of this study is to characterize the gene expression changes that occur in advanced glaucoma. Methods Retinal RNA was obtained from canine eyes with advanced glaucoma as well as from healthy eyes. Global gene expression patterns were determined using oligonucleotide microarrays and confirmed by real-time PCR. The presence of tumor necrosis factor (TNF) and its receptors was evaluated by immunolabeling. Finally, we evaluated the presence of serum autoantibodies directed against retinal epitopes using western blot analyses. Results We identified over 500 genes with statistically significant changes in expression level in the glaucomatous retina. Decreased expression levels were detected for large number of functional groups, including synapse and synaptic transmission, cell adhesion, and calcium metabolism. Many of the molecules with decreased expression levels have been previously shown to be components of retinal ganglion cells. Genes with elevated expression in glaucoma are largely associated with inflammation, such as antigen presentation, protein degradation, and innate immunity. In contrast, expression of many other pro-inflammatory genes, such as interferons or interleukins, was not detected at abnormal levels. Conclusions This study characterizes the molecular events that occur in the canine retina with advanced glaucoma. Our data suggest that in the dog this stage of the disease is accompanied by pronounced retinal neuroinflammation. PMID:21042562

  7. Nano-Magnets and Additive Manufacturing for Electric Motors

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.

    2014-01-01

    High power density is required for application of electric motors in hybrid electric propulsion. Potential path to achieve high power density in electric motors include advanced materials, lightweight thermal management, lightweight structural concepts, high power density power electronics, and advanced manufacturing. This presentation will focus on two key technologies for achieving high power density, advanced magnets and additive manufacturing. The maximum energy product in current magnets is reaching their theoretical limits as a result of material and process improvements. Future improvements in the maximum energy product for magnets can be achieved through development of nanocomposite magnets combining the hard magnetic phase and soft magnetic phase at the nanoscale level. The presentation will provide an overview of the current state of development for nanocomposite magnets and the future path for doubling the maximum energy product. The other part of the presentation will focus on the role of additive manufacturing in fabrication of high power density electric motors. The presentation will highlight the potential opportunities for applying additive manufacturing to fabricate electric motors.

  8. An advanced dispatch simulator with advanced dispatch algorithm

    SciTech Connect

    Kafka, R.J. ); Fink, L.H. ); Balu, N.J. ); Crim, H.G. )

    1989-01-01

    This paper reports on an interactive automatic generation control (AGC) simulator. Improved and timely information regarding fossil fired plant performance is potentially useful in the economic dispatch of system generating units. Commonly used economic dispatch algorithms are not able to take full advantage of this information. The dispatch simulator was developed to test and compare economic dispatch algorithms which might be able to show improvement over standard economic dispatch algorithms if accurate unit information were available. This dispatch simulator offers substantial improvements over previously available simulators. In addition, it contains an advanced dispatch algorithm which shows control and performance advantages over traditional dispatch algorithms for both plants and electric systems.

  9. Hydromechanical Advanced Coal Excavator

    NASA Technical Reports Server (NTRS)

    Estus, Jay M.; Summers, David

    1990-01-01

    Water-jet cutting reduces coal dust and its hazards. Advanced mining system utilizes full-face, hydromechanical, continuous miner. Coal excavator uses high-pressure water-jet lances, one in each of cutting heads and one in movable lance, to make cuts across top, bottom and middle height, respectively, of coal face. Wedge-shaped cutting heads advance into lower and upper cuts in turn, thereby breaking coal toward middle cut. Thrust cylinders and walking pads advance excavator toward coal face.

  10. Reduction of dioxin-like toxicity in effluents by additional wastewater treatment and related effects in fish.

    PubMed

    Maier, Diana; Benisek, Martin; Blaha, Ludek; Dondero, Francesco; Giesy, John P; Köhler, Heinz-R; Richter, Doreen; Scheurer, Marco; Triebskorn, Rita

    2016-10-01

    Efficiency of advanced wastewater treatment technologies to reduce micropollutants which mediate dioxin-like toxicity was investigated. Technologies compared included ozonation, powdered activated carbon and granular activated carbon. In addition to chemical analyses in samples of effluents, surface waters, sediments, and fish, (1) dioxin-like potentials were measured in paired samples of effluents, surface waters, and sediments by use of an in vitro biotest (reporter gene assay) and (2) dioxin-like effects were investigated in exposed fish by use of in vivo activity of the mixed-function, monooxygenase enzyme, ethoxyresorufin O-deethylase (EROD) in liver. All advanced technologies studied, based on degradation or adsorption, significantly reduced dioxin-like potentials in samples and resulted in lesser EROD activity in livers of fish. Results of in vitro and in vivo biological responses were not clearly related to quantification of targeted analytes by use of instrumental analyses. PMID:27262214

  11. Evaluation of the thermal performance of fire fighter protective clothing with the addition of phase change material

    NASA Astrophysics Data System (ADS)

    McCarthy, Lee K.

    Fire fighters rely on fire fighter protective clothing (FFPC) to provide adequate protection in the various hazardous environments they may encounter during operations. FFPC has seen significant advancement in technology over the past few decades. The addition of phase change material (PCM) to FFPC is a new technology with potential to enhance the thermal protection provided by the FFPC. To explore this technology, data from bench-scale experiments involving FFPC with PCMs are compared with a theoretical finite difference heat transfer model. The results demonstrate an effective method to mathematically model the heat transfer and provide insight into the effectiveness of improving the thermal protection of FFPC. The experiments confirm that the latent heat absorbed during the phase change reduces temperatures that might be experienced at the fire fighter's skin surface, advancing the high temperature performance of FFPC.

  12. Nitrogen oxide abatement by distributed fuel addition

    SciTech Connect

    Wendt, J.O.L.; Meraab, J.

    1988-03-25

    The purpose of this project is to develop techniques for nitrogen oxides abatement by distributed fuel addition. The major nitrogen oxide of interest is Nitric Oxide (NO), a precursor to premature forest damage and to acid rain. Recently interest has also been evoked with respect to an additional oxide of nitrogen, namely Nitrous Oxide (N{sub 2}O). Therefore, abatement measures for NO{sub x} are being investigated to determine their influence on N{sub 2}O as well. This report briefly describes the significance of N{sub 2}O emissions to the environment and the urgent need to develop techniques that can reduce emissions of both NO and N{sub 2}O. Reburning through distributed fuel addition may be an effective technique for NO{sub x} (mainly NO) emission control as described in the previous quarterly report. Reburning may also be effective in reducing N{sub 2}O levels. A technique for N{sub 2}O measurement by gas chromatography/electron capture detection was developed during this quarter, and is described in this report. This analysis technique will be used in the proposed experimental study to investigate the effectiveness of reburning on N{sub 2}O control.

  13. Additives for high temperature liquid lubricants

    SciTech Connect

    Moran, C.; Yavrouian, A.H.

    1991-04-01

    The purpose of this task is to perform research for the Department of Energy (DOE) on the synthesis and characterization of additives for liquid lubricants which will lead to significant improvements in the major tribology task area of friction and wear reductions at high temperature. To this end JPL is surveying candidate precursor compounds which are soluble in liquid lubricants, synthesizing the most promising of these materials, characterizing them, and submitting these additives to NIST for evaluation. Calculations have been made to estimate the Hildebrand solubility parameters for candidate precursor compounds. The initial listing is confined to dinitrites which can form chelates with metals or their compounds. The goal is to find soluble additives that can react in situ with the bearing surface to form adherent lubricating film. Although none of the compounds listed match the solubility parameters of liquid lubricants, the lowest solubility parameters were calculated for dialkyl substituted compounds. In this case, there is probably sufficient solubility to provide adequate amounts of reactants on the metal surfaces. The conclusions are based on previous results where only 1/2 to 1% solubility was sufficient to give excellent lubrication.

  14. Advances in Mycotoxin Research: Public Health Perspectives.

    PubMed

    Lee, Hyun Jung; Ryu, Dojin

    2015-12-01

    Aflatoxins, ochratoxins, fumonisins, deoxynivalenol, and zearalenone are of significant public health concern as they can cause serious adverse effects in different organs including the liver, kidney, and immune system in humans. These toxic secondary metabolites are produced by filamentous fungi mainly in the genus Aspergillus, Penicillium, and Fusarium. It is challenging to control the formation of mycotoxins due to the worldwide occurrence of these fungi in food and the environment. In addition to raw agricultural commodities, mycotoxins tend to remain in finished food products as they may not be destroyed by conventional processing techniques. Hence, much of our concern is directed to chronic health effects through long-term exposure to one or multiple mycotoxins from contaminated foods. Ideally risk assessment requires a comprehensive data, including toxicological and epidemiological studies as well as surveillance and exposure assessment. Setting of regulatory limits for mycotoxins is considered necessary to protect human health from mycotoxin exposure. Although advances in analytical techniques provide basic yet critical tool in regulation as well as all aspects of scientific research, it has been acknowledged that different forms of mycotoxins such as analogs and conjugated mycotoxins may constitute a significant source of dietary exposure. Further studies should be warranted to correlate mycotoxin exposure and human health possibly via identification and validation of suitable biomarkers. PMID:26565730

  15. Ultra-Low NOx Advanced Vortex Combustor

    SciTech Connect

    Edmonds, R.G.; Steele, R.C.; Williams, J.T.; Straub, D.L.; Casleton, K.H.; Bining, Avtar

    2006-05-01

    An ultra lean-premixed Advanced Vortex Combustor (AVC) has been developed and tested. The natural gas fueled AVC was tested at the U.S. Department of Energy’s National Energy Technology Laboratory (USDOE NETL) test facility in Morgantown (WV). All testing was performed at elevated pressures and inlet temperatures and at lean fuel-air ratios representative of industrial gas turbines. The improved AVC design exhibited simultaneous NOx/CO/UHC emissions of 4/4/0 ppmv (all emissions are at 15% O2 dry). The design also achieved less than 3 ppmv NOx with combustion efficiencies in excess of 99.5%. The design demonstrated tremendous acoustic dynamic stability over a wide range of operating conditions which potentially makes this approach significantly more attractive than other lean premixed combustion approaches. In addition, a pressure drop of 1.75% was measured which is significantly lower than conventional gas turbine combustors. Potentially, this lower pressure drop characteristic of the AVC concept translates into overall gas turbine cycle efficiency improvements of up to one full percentage point. The relatively high velocities and low pressure drops achievable with this technology make the AVC approach an attractive alternative for syngas fuel applications.

  16. Assessment of Advanced Coal Gasification Processes

    NASA Technical Reports Server (NTRS)

    McCarthy, John; Ferrall, Joseph; Charng, Thomas; Houseman, John

    1981-01-01

    This report represents a technical assessment of the following advanced coal gasification processes: AVCO High Throughput Gasification (HTG) Process; Bell Single-Stage High Mass Flux (HMF) Process; Cities Service/Rockwell (CS/R) Hydrogasification Process; Exxon Catalytic Coal Gasification (CCG) Process. Each process is evaluated for its potential to produce SNG from a bituminous coal. In addition to identifying the new technology these processes represent, key similarities/differences, strengths/weaknesses, and potential improvements to each process are identified. The AVCO HTG and the Bell HMF gasifiers share similarities with respect to: short residence time (SRT), high throughput rate, slagging and syngas as the initial raw product gas. The CS/R Hydrogasifier is also SRT but is non-slagging and produces a raw gas high in methane content. The Exxon CCG gasifier is a long residence time, catalytic, fluidbed reactor producing all of the raw product methane in the gasifier. The report makes the following assessments: 1) while each process has significant potential as coal gasifiers, the CS/R and Exxon processes are better suited for SNG production; 2) the Exxon process is the closest to a commercial level for near-term SNG production; and 3) the SRT processes require significant development including scale-up and turndown demonstration, char processing and/or utilization demonstration, and reactor control and safety features development.

  17. Prognostic Significance of Ascites and Serum Sodium in Patients with Low Meld Scores

    PubMed Central

    Prohic, Dzanela; Mesihovic, Rusmir; Vanis, Nenad; Puhalovic, Amra

    2016-01-01

    Objective: to determine ascites and serum sodium significance in short term mortality prediction in patients with advanced liver cirrhosis. Methods: a cohort of 115 cirrhotic patients referred to our Department were followed up for 6 months in non-transplant settings. The c index equivalent to the area under the receiver operating curve (ROC) was calculated and compared to estimate the short-term prognostic accuracy of the following parameters: ascites, serum sodium and MELD score. Results: in patients with a MELD score less than 21, ascites and low serum sodium (c index 0,687, p<0 0,001 and 0,748, p<0,001 respectively) showed better prognostic accuracy and were independent predictors of mortality. For MELD scores above 21, only MELD was an independent mortality prognostic factor (c index 0,710, p<0,001). Conclusion: in our study, sample ascites and low serum sodium help identify patients with advanced liver disease who are at high risk of mortality despite low MELD scores. These parameters should be considered as additional prognostic parameters that could improve available treatment options and outcomes in this group of patients. PMID:26980932

  18. Significance of FISH in clinical cytogenetics

    SciTech Connect

    Gopal Rao, V.V.N.; Harris, S.; Roop, H.

    1994-09-01

    Ever since its discovery, FISH technology has become an invaluable adjunct to conventional cytogenetics. FISH has been instrumental in resolving previously unresolved cytogenetic dilemmas. FISH has been used to elucidate complex as well as subtle chromosomal translocations, in detection of microdeletions, to confirm duplications and inversions and to identify marker chromosomes. We report a few selected cases where FISH proved to be invaluable in not only confirming the anomaly, but also in arriving at an accurate diagnosis and appropriate counseling of the patients. These include 3 cases of prenatal and 3 cases of postnatal diagnosis. The results clearly demonstrate the significance of FISH in identifying and interpreting the difficult karyotype in clinical cytogenetics. In addition, FISH has been used to rule out microdeletions in Prader-Willi (16), Angelman (3), Miller-Dieker (7), DiGeorge (4) and Smith-Magenis (1) syndrome patients. Without FISH in the majority of these cases, it would not have been possible to accurately identify the karyotype and interpret the results. Hence, we recommend that FISH be used as a powerful adjunct to conventional cytogenetics in order to arrive at an accurate interpretation of the results but not to replace routine cytogenetic studies.

  19. Physical significance of interfaces on fracture growth

    SciTech Connect

    Wang, J.J.; Guo, Q. )

    1993-08-01

    Details of the interfaces between two geologic materials are normally neglected in predicting the growth of hydraulic fractures. In addition, perfect bonding is assumed across the interface. However, due to a combination of reasons, the perfect bonding assumption is violated to various degrees. Assessment for potential slippage is important to fracture-growth modeling. As a fracture approaches an interface, both mode I (for a fracture crossing the interface) and mode II (for a fracture extending in the interface) stress-intensity factors need to be evaluated. Should the interface properties be such that the mode I stress-intensity factor reach the critical value, the fracture will cross the interface. Should the converse happen and the mode II stress-intensity factor become critical, slippage along the interface will occur. If both the critical stress intensity factors are reached simultaneously, both fractures across the interface and slippage will occur. Good description of the interface material is needed to model the fracturing process. Methodology to model the physical significance of interfaces for calculating two-dimensional fracture growth includes descriptions of applications to oil/gas recovery and the injection of contaminants in isolated formations.

  20. Making lasting memories: Remembering the significant

    PubMed Central

    McGaugh, James L.

    2013-01-01

    Although forgetting is the common fate of most of our experiences, much evidence indicates that emotional arousal enhances the storage of memories, thus serving to create, selectively, lasting memories of our more important experiences. The neurobiological systems mediating emotional arousal and memory are very closely linked. The adrenal stress hormones epinephrine and corticosterone released by emotional arousal regulate the consolidation of long-term memory. The amygdala plays a critical role in mediating these stress hormone influences. The release of norepinephrine in the amygdala and the activation of noradrenergic receptors are essential for stress hormone-induced memory enhancement. The findings of both animal and human studies provide compelling evidence that stress-induced activation of the amygdala and its interactions with other brain regions involved in processing memory play a critical role in ensuring that emotionally significant experiences are well-remembered. Recent research has determined that some human subjects have highly superior autobiographic memory of their daily experiences and that there are structural differences in the brains of these subjects compared with the brains of subjects who do not have such memory. Understanding of neurobiological bases of such exceptional memory may provide additional insights into the processes underlying the selectivity of memory. PMID:23754441

  1. Environmental "Omics" of International Space Station: Insights, Significance, and Consequences

    NASA Astrophysics Data System (ADS)

    Venkateswaran, Kasthuri

    2016-07-01

    The NASA Space Biology program funded two multi-year studies to catalogue International Space Station (ISS) environmental microbiome. The first Microbial Observatory (MO) experiment will generate a microbial census of the ISS surfaces and atmosphere using advanced molecular microbial community analysis "omics" techniques, supported by traditional culture-based methods and state-of-the art molecular techniques. The second MO experiment will measure presence of viral and select bacterial and fungal pathogens on ISS surfaces and correlate their presence on crew. The "omics" methodologies of the MO experiments will serve as the foundation for an extensive microbial census, offering significant insight into spaceflight-induced changes in the populations of beneficial and potentially harmful microbes. The safety of crewmembers and the maintenance of hardware are the primary goals for monitoring microorganisms in this closed habitat. The statistical analysis of the ISS microbiomes showed that three bacterial phyla dominated both in ISS and Earth cleanrooms, but varied in their abundances. While members of Actinobacteria were predominant on ISS, Proteobacteria dominated the Earth cleanrooms. Alpha diversity estimators indicated a significant drop in viable microbial diversity. To better characterize the shared community composition among samples, beta-diversity metrics analysis were conducted. At the bacterial species level characterization, the microbial community composition is strongly associated with sampling site. Results of the study indicate significant differences between ISS and Earth cleanroom microbiomes in terms of community structure and composition. Bacterial strains isolated from ISS surfaces were also tested for their resistance to nine antibiotics using conventional disc method and Vitek 2 system. Most of the Staphylococcus aureus strains were resistant to penicillin. Five strains were specifically resistant to erythromycin and the ermA gene was also

  2. Advanced power systems for EOS

    NASA Technical Reports Server (NTRS)

    Bailey, Sheila G.; Weinberg, Irving; Flood, Dennis J.

    1991-01-01

    The Earth Observing System, which is part of the International Mission to Planet Earth, is NASA's main contribution to the Global Change Research Program. Five large platforms are to be launched into polar orbit: two by NASA, two by the European Space Agency, and one by the Japanese. In such an orbit the radiation resistance of indium phosphide solar cells combined with the potential of utilizing 5 micron cell structures yields an increase of 10 percent in the payload capability. If further combined with the Advanced Photovoltaic Solar Array, the total additional payload capability approaches 12 percent.

  3. Advanced detectors and signal processing

    NASA Technical Reports Server (NTRS)

    Greve, D. W.; Rasky, P. H. L.; Kryder, M. H.

    1986-01-01

    Continued progress is reported toward development of a silicon on garnet technology which would allow fabrication of advanced detection and signal processing circuits on bubble memories. The first integrated detectors and propagation patterns have been designed and incorporated on a new mask set. In addition, annealing studies on spacer layers are performed. Based on those studies, a new double layer spacer is proposed which should reduce contamination of the silicon originating in the substrate. Finally, the magnetic sensitivity of uncontaminated detectors from the last lot of wafers is measured. The measured sensitivity is lower than anticipated but still higher than present magnetoresistive detectors.

  4. The Advanced Solid Rocket Motor

    NASA Astrophysics Data System (ADS)

    Mitchell, Royce E.

    1992-08-01

    The Advanced Solid Rocket Motor will utilize improved design features and automated manufacturing methods to produce an inherently safer propulsive system for the Space Shuttle and future launch systems. This second-generation motor will also provide an additional 12,000 pounds of payload to orbit, enhancing the utility and efficiency of the Shuttle system. The new plant will feature strip-wound, asbestos-free insulation; propellant continuous mixing and casting; and extensive robotic systems. Following a series of static tests at the Stennis Space Center, MS flights are targeted to begin in early 1997.

  5. The Advanced Solid Rocket Motor

    NASA Technical Reports Server (NTRS)

    Mitchell, Royce E.

    1992-01-01

    The Advanced Solid Rocket Motor will utilize improved design features and automated manufacturing methods to produce an inherently safer propulsive system for the Space Shuttle and future launch systems. This second-generation motor will also provide an additional 12,000 pounds of payload to orbit, enhancing the utility and efficiency of the Shuttle system. The new plant will feature strip-wound, asbestos-free insulation; propellant continuous mixing and casting; and extensive robotic systems. Following a series of static tests at the Stennis Space Center, MS flights are targeted to begin in early 1997.

  6. Supplier Selection Using Weighted Utility Additive Method

    NASA Astrophysics Data System (ADS)

    Karande, Prasad; Chakraborty, Shankar

    2015-10-01

    Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

  7. Minimum Additive Waste Stabilization (MAWS). Technology summary

    SciTech Connect

    Not Available

    1994-02-01

    In the Minimum Additive Waste Stabilization(MAWS) concept, actual waste streams are utilized as additive resources for vitrification, which may contain the basic components (glass formers and fluxes) for making a suitable glass or glassy slag. If too much glass former is present, then the melt viscosity or temperature will be too high for processing; while if there is too much flux, then the durability may suffer. Therefore, there are optimum combinations of these two important classes of constituents depending on the criteria required. The challenge is to combine these resources in such a way that minimizes the use of non-waste additives yet yields a processable and durable final waste form for disposal. The benefit to this approach is that the volume of the final waste form is minimized (waste loading maximized) since little or no additives are used and vitrification itself results in volume reduction through evaporation of water, combustion of organics, and compaction of the solids into a non-porous glass. This implies a significant reduction in disposal costs due to volume reduction alone, and minimizes future risks/costs due to the long term durability and leach resistance of glass. This is accomplished by using integrated systems that are both cost-effective and produce an environmentally sound waste form for disposal. individual component technologies may include: vitrification; thermal destruction; soil washing; gas scrubbing/filtration; and, ion-exchange wastewater treatment. The particular combination of technologies will depend on the waste streams to be treated. At the heart of MAWS is vitrification technology, which incorporates all primary and secondary waste streams into a final, long-term, stabilized glass wasteform. The integrated technology approach, and view of waste streams as resources, is innovative yet practical to cost effectively treat a broad range of DOE mixed and low-level wastes.

  8. ENHANCING ADVANCED CANDU PROLIFERATION RESISTANCE FUEL WITH MINOR ACTINIDES

    SciTech Connect

    Gray S. Chang

    2010-05-01

    The advanced nuclear system will significantly advance the science and technology of nuclear energy systems and to enhance the spent fuel proliferation resistance. Minor actinides (MA) are viewed more as a resource to be recycled, and transmuted to less hazardous and possibly more useful forms, rather than simply disposed of as a waste stream in an expensive repository facility. MAs can play a much larger part in the design of advanced systems and fuel cycles, not only as additional sources of useful energy, but also as direct contributors to the reactivity control of the systems into which they are incorporated. In this work, an Advanced CANDU Reactor (ACR) fuel unit lattice cell model with 43 UO2 fuel rods will be used to investigate the effectiveness of a Minor Actinide Reduction Approach (MARA) for enhancing proliferation resistance and improving the fuel cycle performance. The main MARA objective is to increase the 238Pu / Pu isotope ratio by using the transuranic nuclides (237Np and 241Am) in the high burnup fuel and thereby increase the proliferation resistance even for a very low fuel burnup. As a result, MARA is a very effective approach to enhance the proliferation resistance for the on power refueling ACR system nuclear fuel. The MA transmutation characteristics at different MA loadings were compared and their impact on neutronics criticality assessed. The concept of MARA, significantly increases the 238Pu/Pu ratio for proliferation resistance, as well as serves as a burnable absorber to hold-down the initial excess reactivity. It is believed that MARA can play an important role in atoms for peace and the intermediate term of nuclear energy reconnaissance.

  9. Advanced Geothermal Turbodrill

    SciTech Connect

    W. C. Maurer

    2000-05-01

    Approximately 50% of the cost of a new geothermal power plant is in the wells that must be drilled. Compared to the majority of oil and gas wells, geothermal wells are more difficult and costly to drill for several reasons. First, most U.S. geothermal resources consist of hot, hard crystalline rock formations which drill much slower than the relatively soft sedimentary formations associated with most oil and gas production. Second, high downhole temperatures can greatly shorten equipment life or preclude the use of some technologies altogether. Third, producing viable levels of electricity from geothermal fields requires the use of large diameter bores and a high degree of fluid communication, both of which increase drilling and completion costs. Optimizing fluid communication often requires creation of a directional well to intersect the best and largest number of fracture capable of producing hot geothermal fluids. Moineau motor stators made with elastomers cannot operate at geothermal temperatures, so they are limited to the upper portion of the hole. To overcome these limitations, Maurer Engineering Inc. (MEI) has developed a turbodrill that does not use elastomers and therefore can operate at geothermal temperatures. This new turbodrill uses a special gear assembly to reduce the output speed, thus allowing a larger range of bit types, especially tri-cone roller bits, which are the bits of choice for drilling hard crystalline formations. The Advanced Geothermal Turbodrill (AGT) represents a significant improvement for drilling geothermal wells and has the potential to significantly reduce drilling costs while increasing production, thereby making geothermal energy less expensive and better able to compete with fossil fuels. The final field test of the AGT will prepare the tool for successful commercialization.

  10. Advances in rapid prototyping

    SciTech Connect

    Atwood, C.L.; McCarty, G.D.; Pardo, B.T.; Bryce, E.A.

    1993-12-31

    Recent advances in stereolithography and selective laser sintering have had a significant impact on the overall quality of parts produced using these rapid prototyping processes. The development and implementation of 3D System`s QuickCast{trademark} resin and software for building investment casting patterns have proven to be major steps toward fabricating highly accurate patterns with very good surface finishes. Sandia uses patterns generated from rapid prototyping processes to reduce the cycle time and cost of fabricating prototype parts in support of a Sandia National Laboratories managed program called FASTCAST. As participants in the Beta test program for QuickCast{trademark} resin and software, they experienced a steep learning curve and were able to build accurate parts in a short period of time. It is now possible, using this technology, to produce highly accurate prototype parts as well as acceptable firs article and small lots size production parts. They use the Selective Laser Sintering (SLS) process to fabricate prototype wax patterns for investment casting. DTM Corporation recently introduced the use of their polycarbonate material for fabricating investment casting patterns. The polycarbonate material is processed significantly faster, with improved strength, dimensional stability, and without a support structure during the build process. Sandia is currently changing from investment casting wax to polycarbonate for the fabrication of investment casting patterns using the SLS process. This presentation will focus on the successes with these new materials from the standpoints of application, accuracy, surface finish, and post processing. Also presented will be examples of parts manufactured by these processes.

  11. Code qualification of structural materials for AFCI advanced recycling reactors.

    SciTech Connect

    Natesan, K.; Li, M.; Majumdar, S.; Nanstad, R.K.; Sham, T.-L.

    2012-05-31

    This report summarizes the further findings from the assessments of current status and future needs in code qualification and licensing of reference structural materials and new advanced alloys for advanced recycling reactors (ARRs) in support of Advanced Fuel Cycle Initiative (AFCI). The work is a combined effort between Argonne National Laboratory (ANL) and Oak Ridge National Laboratory (ORNL) with ANL as the technical lead, as part of Advanced Structural Materials Program for AFCI Reactor Campaign. The report is the second deliverable in FY08 (M505011401) under the work package 'Advanced Materials Code Qualification'. The overall objective of the Advanced Materials Code Qualification project is to evaluate key requirements for the ASME Code qualification and the Nuclear Regulatory Commission (NRC) approval of structural materials in support of the design and licensing of the ARR. Advanced materials are a critical element in the development of sodium reactor technologies. Enhanced materials performance not only improves safety margins and provides design flexibility, but also is essential for the economics of future advanced sodium reactors. Code qualification and licensing of advanced materials are prominent needs for developing and implementing advanced sodium reactor technologies. Nuclear structural component design in the U.S. must comply with the ASME Boiler and Pressure Vessel Code Section III (Rules for Construction of Nuclear Facility Components) and the NRC grants the operational license. As the ARR will operate at higher temperatures than the current light water reactors (LWRs), the design of elevated-temperature components must comply with ASME Subsection NH (Class 1 Components in Elevated Temperature Service). However, the NRC has not approved the use of Subsection NH for reactor components, and this puts additional burdens on materials qualification of the ARR. In the past licensing review for the Clinch River Breeder Reactor Project (CRBRP) and the

  12. Impact significance determination-Back to basics

    SciTech Connect

    Lawrence, David P.

    2007-11-15

    Impact significance determination is widely recognized as a vital and critical EIA activity. But impact significance related concepts are poorly understood. And the quality of approaches for impact significance determination in EIA practice remains highly variable. This article seeks to help establish a sound and practical conceptual foundation for formulating and evaluating impact significance determination approaches. It addresses the nature (what is impact significance?), the core characteristics (what are the major properties of significance determination?), the rationale (why are impact significance determinations necessary?), the procedural and substantive objectives (what do impact significance determinations seek to achieve?), and the process for making impact significance judgments (how is impact significance determination conducted?). By identifying fundamental attributes and key distinctions associated with impact significance determinations, a basis is provided for designing and evaluating impact significance determination procedures at both the regulatory and applied levels.

  13. The paleoclimatic significance of deformation structures in Neoproterozoic successions

    NASA Astrophysics Data System (ADS)

    Arnaud, Emmanuelle

    2012-01-01

    This paper reviews the different types of soft sediment deformation structures that can form in glacial and non-glacial settings and explores the potential use of these structures in resolving long standing debates in paleoenvironmental reconstructions of Neoproterozoic glacigenic successions. Soft sediment deformation structures are created when compressional, gravitational or shear stress is applied to unlithified sediments during or shortly after deposition. In subglacial or ice marginal glacial settings, shear and compressional stress imparted by ice moving on top of a deformable substrate or advancing ice buldozing unlithified ice marginal sediments can result in a wide range of folding, faulting and shear structures. In glaciofluvial or stagnant ice marginal setting, gravitational collapse and remobilization of sediments associated with the melting of buried ice can result in normal faulting and broad folding. In glaciolacustrine or glaciomarine settings, compressional, shear and gravitational types of deformation structures can occur as a result of grounding ice or icebergs, rapid sedimentation and reworking downslope associated with high sedimentation rates. In non glacial settings, similar deformation structures can form as a result of slope instability and reworking of sediments downslope, rapid sedimentation, seismic shaking, wave induced shearing or loading. In this context, two case studies are presented to demonstrate the type of paleoenvironmental information that an analysis of deformation structures can provide. In the first case study, analysis of deformation in the Port Askaig Formation (Scotland) reveals a distinctive stratigraphic distribution of deformation structures. The types of deformation observed together with their recurrence over several 100s of meters and their basinal context are used to infer a seismic origin for the deformation, which in turn suggests a significant tectonic control on sedimentation atop a record of ice margin

  14. Advanced Airspace Concept

    NASA Technical Reports Server (NTRS)

    Erzberger, Heinz

    2002-01-01

    A general overview of the Advanced Airspace Concept (AAC) is presented. The topics include: 1) Limitations of the existing system; 2) The Advanced Airspace Concept; 3) Candidate architecture for the AAC; 4) Separation assurance and conflict avoidance system (TSAFE); and 5) Ground-Air Interactions. This paper is in viewgraph form.

  15. Kansas Advanced Semiconductor Project

    SciTech Connect

    Baringer, P.; Bean, A.; Bolton, T.; Horton-Smith, G.; Maravin, Y.; Ratra, B.; Stanton, N.; von Toerne, E.; Wilson, G.

    2007-09-21

    KASP (Kansas Advanced Semiconductor Project) completed the new Layer 0 upgrade for D0, assumed key electronics projects for the US CMS project, finished important new physics measurements with the D0 experiment at Fermilab, made substantial contributions to detector studies for the proposed e+e- international linear collider (ILC), and advanced key initiatives in non-accelerator-based neutrino physics.

  16. Advanced Engineering Fibers.

    ERIC Educational Resources Information Center

    Edie, Dan D.; Dunham, Michael G.

    1987-01-01

    Describes Clemson University's Advanced Engineered Fibers Laboratory, which was established to provide national leadership and expertise in developing the processing equipment and advance fibers necessary for the chemical, fiber, and textile industries to enter the composite materials market. Discusses some of the laboratory's activities in…

  17. Advanced Life Support

    NASA Technical Reports Server (NTRS)

    Chambliss, Joe

    2004-01-01

    Viewgraphs on Advanced Life Support (ALS) Systems are presented. The topics include: 1) Fundamental Need for Advanced Life Support; 2) ALS organization; 3) Requirements and Rationale; 4) Past Integrated tests; 5) The need for improvements in life support systems; 6) ALS approach to meet exploration goals; 7) ALS Projects showing promise to meet exploration goals; and 9) GRC involvement in ALS.

  18. Drilling at Advanced Levels

    ERIC Educational Resources Information Center

    Case, Doug

    1977-01-01

    Instances where drilling is useful for advanced language are discussed. Several types of drills are recommended, with the philosophy that advanced level drills should have a lighter style and be regarded as a useful, occasional means of practicing individual new items. (CHK)

  19. The anatomy, affinity, and phylogenetic significance of Markuelia.

    PubMed

    Dong, Xi-Ping; Donoghue, Philip C J; Cunningham, John A; Liu, Jian-Bo; Cheng, Hong

    2005-01-01

    The fossil record provides a paucity of data on the development of extinct organisms, particularly for their embryology. The recovery of fossilized embryos heralds new insight into the evolution of development but advances are limited by an almost complete absence of phylogenetic constraint. Markuelia is an exception to this, known from cleavage and pre-hatchling stages as a vermiform and profusely annulated direct-developing bilaterian with terminal circumoral and posterior radial arrays of spines. Phylogenetic analyses have hitherto suggested assignment to stem-Scalidophora (phyla Kinorhyncha, Loricifera, Priapulida). We test this assumption with additional data and through the inclusion of additional taxa. The available evidence supports stem-Scalidophora affinity, leading to the conclusion that scalidophorans, cyclonerualians, and ecdysozoans are primitive direct developers, and the likelihood that scalidophorans are primitively metameric. PMID:16174039

  20. Tobacco cessation education for advanced practice nurses.

    PubMed

    Whitehead, Diane; Zucker, Steven B; Stone, Jennifer

    2014-01-01

    The predicted shortfall of primary care physicians and the millions of newly insured beginning in 2014 call for an increase in the number of advanced practice nurses (APRNs). Advanced practice nurses can significantly improve their clients' quality of life and increase their life expectancy through tobacco cessation education. The purpose of this study was to educate APRN students on smoking information and techniques to assist clients with quitting smoking in the primary care setting. PMID:24867074