Science.gov

Sample records for addition significant positive

  1. Prognostic Significance of Single Progesterone Receptor Positivity

    PubMed Central

    Fan, Ying; Ding, Xiaoyan; Xu, Binghe; Ma, Fei; Yuan, Peng; Wang, Jiayu; Zhang, Pin; Li, Qing; Luo, Yang

    2015-01-01

    Abstract Single progesterone receptor positive (PgR+), especially in form of ER−/PgR+/HER2−, is a nonnegligible phenomenon. Little is known about the characteristics and the role of single PgR positive in this phenotype. Therefore, we explore the significance of single PgR positivity by comparing ER−/PgR+/HER2− breast cancers with triple negative breast cancers (TNBCs). Three thousand nine hundred sixty-six cases of primary invasive breast carcinoma operated consecutively from January 2005 to May 2008 in Cancer Hospital, Chinese Academy of Medical Sciences were examined. Two hundred forty (6%) cases were identified as ER−/PgR+/HER2− breast cancers and 348 (8.8%) cases as TNBCs. Clinicopathological characteristics and survivals were analyzed respectively and then compared between 2 subtypes. Compared with patients with TNBCs, ER−/PgR+/HER2− tumor tended to have lower tumor grade (Grade 3: 45.7% vs. 37.5%, P = 0.051) and smaller tumor size (P = 0.036). However, no differences were found between ER−/PgR+/HER2− and TNBC patients in relapse-free survival (RFS) and OS. The 5-year RFS rates were 80.7% and 77.4%, respectively (P = 0.330) and the 5-year OS rates were 88.0% and 85.2%, respectively (P = 0.290). ER−/PgR+/HER2− patients receiving adjuvant endocrine treatment had better RFS (P = 0.016) and overall survival (OS) (P < 0.0001) than patients receiving no endocrine therapy. This exclusive analysis of patients with ER−/PgR+/HER2− breast cancers showed that this subtype exhibited an aggressive behavior as TNBC, suggesting that it should also be regarded as biologically distinctive group and single PgR positive itself is not a good prognostic factor. However, adjuvant endocrine therapy could still benefit this group of patients. Further investigations should be done to elucidate the underlying mechanism. PMID:26579819

  2. Systematic tests for position-dependent additive shear bias

    NASA Astrophysics Data System (ADS)

    van Uitert, Edo; Schneider, Peter

    2016-11-01

    We present new tests to identify stationary position-dependent additive shear biases in weak gravitational lensing data sets. These tests are important diagnostics for currently ongoing and planned cosmic shear surveys, as such biases induce coherent shear patterns that can mimic and potentially bias the cosmic shear signal. The central idea of these tests is to determine the average ellipticity of all galaxies with shape measurements in a grid in the pixel plane. The distribution of the absolute values of these averaged ellipticities can be compared to randomised catalogues; a difference points to systematics in the data. In addition, we introduce a method to quantify the spatial correlation of the additive bias, which suppresses the contribution from cosmic shear and therefore eases the identification of a position-dependent additive shear bias in the data. We apply these tests to the publicly available shear catalogues from the Canada-France-Hawaii Telescope Lensing Survey (CFHTLenS) and the Kilo Degree Survey (KiDS) and find evidence for a small but non-negligible residual additive bias at small scales. As this residual bias is smaller than the error on the shear correlation signal at those scales, it is highly unlikely that it causes a significant bias in the published cosmic shear results of CFHTLenS. In CFHTLenS, the amplitude of this systematic signal is consistent with zero in fields where the number of stars used to model the point spread function (PSF) is higher than average, suggesting that the position-dependent additive shear bias originates from undersampled PSF variations across the image.

  3. Addition of Cryoprotectant Significantly Alters the Epididymal Sperm Proteome

    PubMed Central

    Yoon, Sung-Jae; Rahman, Md Saidur; Kwon, Woo-Sung; Park, Yoo-Jin; Pang, Myung-Geol

    2016-01-01

    Although cryopreservation has been developed and optimized over the past decades, it causes various stresses, including cold shock, osmotic stress, and ice crystal formation, thereby reducing fertility. During cryopreservation, addition of cryoprotective agent (CPA) is crucial for protecting spermatozoa from freezing damage. However, the intrinsic toxicity and osmotic stress induced by CPA cause damage to spermatozoa. To identify the effects of CPA addition during cryopreservation, we assessed the motility (%), motion kinematics, capacitation status, and viability of epididymal spermatozoa using computer-assisted sperm analysis and Hoechst 33258/chlortetracycline fluorescence staining. Moreover, the effects of CPA addition were also demonstrated at the proteome level using two-dimensional electrophoresis. Our results demonstrated that CPA addition significantly reduced sperm motility (%), curvilinear velocity, viability (%), and non-capacitated spermatozoa, whereas straightness and acrosome-reacted spermatozoa increased significantly (p < 0.05). Ten proteins were differentially expressed (two decreased and eight increased) (>3 fold, p < 0.05) after CPA, whereas NADH dehydrogenase flavoprotein 2, f-actin-capping protein subunit beta, superoxide dismutase 2, and outer dense fiber protein 2 were associated with several important signaling pathways (p < 0.05). The present study provides a mechanistic basis for specific cryostresses and potential markers of CPA-induced stress. Therefore, these might provide information about the development of safe biomaterials for cryopreservation and basic ground for sperm cryopreservation. PMID:27031703

  4. 20 CFR 655.154 - Additional positive recruitment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... recruitment within a multistate region of traditional or expected labor supply where the CO finds that there... to non-H-2A employers in the area. The CO will ensure that the effort, including the location(s) and... employer made to obtain foreign workers. (c) Nature of the additional positive recruitment. The CO...

  5. The Distinction between Positive and Negative Reinforcement: Some Additional Considerations

    ERIC Educational Resources Information Center

    Sidman, Murray

    2006-01-01

    In this article, the author discusses the distinction between positive and negative reinforcement and some additional considerations. He states that the concept of negative reinforcement has caused confusion, and he believes that the difficulty stems from conventions of ordinary speech, in which the term "negative" usually denotes the opposite of…

  6. Additional Guidance on Prevention of Significant Deterioration (PSD) Regulations

    EPA Pesticide Factsheets

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  7. Additional branches of celiac trunk and its clinical significance.

    PubMed

    Nayak, S R; Prabhu, Latha V; Krishnamurthy, A; Ganesh Kumar, C; Ramanathan, Lakshmi A; Acharya, Abhijith; Prasad Sinha, Abhishek

    2008-01-01

    The anatomical variations of the abdominal arteries are important due to its clinical significance. Various types of vascular anomalies are frequently found in human abdominal viscera, during cadaveric dissection and diagnostic radiological imaging. The present report describes a variation in the celiac trunk as found during routine dissection in a 59-year-old male cadaver. The celiac trunk (CT) was unusually lengthy and took origin from the left antero-lateral surface of the abdominal aorta. Altogether, there were five branches, including three classic branches of CT. The left phrenic artery (LPA) was the first branch of the CT. The remaining four branches were left gastric artery (LGA), splenic artery (SA), common hepatic artery (CHA) and gastroduodenal artery (GDA). There was an arterial loop between the posterior branches of the superior pancreatico-duodenal artery (SPDA), arising from the GDA, and the posterior branch of the inferior pancreatico-duodenal artery (IPDA), arising from the superior mesenteric artery (SMA). The arterial loop formed by the above arteries, supplied the head of the pancreas and duodeno-jejunal flexure. The embryological and clinical significance of above variations has been described.

  8. Significance of Fecal Coliform-Positive Klebsiella1

    PubMed Central

    Bagley, Susan T.; Seidler, Ramon J.

    1977-01-01

    A total of 191 Klebsiella pneumoniae isolates of human clinical, bovine mastitis, and a wide variety of environmental sources were tested for fecal coliform (FC) response with the membrane filtration and most probable number techniques. Twenty-seven Escherichia coli cultures of human clinical and environmental origins were also tested. Eighty-five percent (49/58) of known pathogenic K. pneumoniae were FC positive, compared with 16% (19/120) of the environmental strains. E. coli results indicated 93% (13/14) of the clinical and 85% (11/13) of the environmental strains as FC positive. There was no significant difference in the incidence of FC-positive cultures between pathogenic Klebsiella and E. coli. pH measurements of K. pneumoniae and E. coli cultures growing in m-FC broth at 44.5°C revealed three distinct pH ranges correlating with colony morphology. β-Galactosidase assays of Klebsiella and E. coli cultures at 44.5°C indicated all were able to hydrolyze lactose, even if they were FC negative by the membrane filtration or most probable number techniques. The FC response pattern appears stable in K. pneumoniae. Three pathogenic cultures showed no change in FC responses after 270 generations of growth in sterile pulp mill effluent. Since K. pneumoniae is carried in the gastrointestinal tract of humans and animals and 85% of the tested pathogenic strains were FC positive, the isolation of FC-positive Klebsiella organisms from the environment would indicate their fecal or clinical origin or both. The added fact that K. pneumoniae is an opportunistic pathogen of increasing importance makes the occurrence of FC-positive environmental Klebsiella, particularly in large numbers, a potential human and animal health hazard. PMID:18086

  9. Significant Life Experiences and Environmental Justice: Positionality and the Significance of Negative Social/Environmental Experiences

    ERIC Educational Resources Information Center

    Ceaser, Donovon

    2015-01-01

    Significant life experiences (SLE) research has been criticized for a disproportionate focus on privileged groups and positive experiences. In this paper, I use textual analysis to examine the SLEs within the Environmental Justice (EJ) literature. Theoretically, I blend feminist theory, the sociology of disaster, and research on EJ motives for…

  10. Functional significance of the emotion-related late positive potential

    PubMed Central

    Brown, Stephen B. R. E.; van Steenbergen, Henk; Band, Guido P. H.; de Rover, Mischa; Nieuwenhuis, Sander

    2012-01-01

    The late positive potential (LPP) is an event-related potential (ERP) component over visual cortical areas that is modulated by the emotional intensity of a stimulus. However, the functional significance of this neural modulation remains elusive. We conducted two experiments in which we studied the relation between LPP amplitude, subsequent perceptual sensitivity to a non-emotional stimulus (Experiment 1) and visual cortical excitability, as reflected by P1/N1 components evoked by this stimulus (Experiment 2). During the LPP modulation elicited by unpleasant stimuli, perceptual sensitivity was not affected. In contrast, we found some evidence for a decreased N1 amplitude during the LPP modulation, a decreased P1 amplitude on trials with a relatively large LPP, and consistent negative (but non-significant) across-subject correlations between the magnitudes of the LPP modulation and corresponding changes in d-prime or P1/N1 amplitude. The results provide preliminary evidence that the LPP reflects a global inhibition of activity in visual cortex, resulting in the selective survival of activity associated with the processing of the emotional stimulus. PMID:22375117

  11. Chronic pain and the adaptive significance of positive emotions.

    PubMed

    Ong, Anthony D; Zautra, Alex J; Reid, M Carrington

    2015-04-01

    The February-March 2014 special issue of the American Psychologist featured articles summarizing select contributions from the field of psychology to the assessment and treatment of chronic pain. The articles examined a range of psychosocial and family factors that influence individual adjustment and contribute to disparities in pain care. The reviews also considered the psychological correlates and neurophysiological mechanisms of specific pain treatments, including cognitive-behavioral therapy, hypnosis, acceptance and commitment therapy, mindfulness, and meditation. Although a number of articles emphasized the role that negative states of mind play in pain outcomes, positive emotions were given only brief mention. Here, we provide a rationale for the inclusion of positive emotions in chronic pain research.

  12. Nitrogen Addition Significantly Affects Forest Litter Decomposition under High Levels of Ambient Nitrogen Deposition

    PubMed Central

    Chen, Gang; Peng, Yong; Xiao, Yin-long; Hu, Ting-xing; Zhang, Jian; Li, Xian-wei; Liu, Li; Tang, Yi

    2014-01-01

    Background Forest litter decomposition is a major component of the global carbon (C) budget, and is greatly affected by the atmospheric nitrogen (N) deposition observed globally. However, the effects of N addition on forest litter decomposition, in ecosystems receiving increasingly higher levels of ambient N deposition, are poorly understood. Methodology/Principal Findings We conducted a two-year field experiment in five forests along the western edge of the Sichuan Basin in China, where atmospheric N deposition was up to 82–114 kg N ha–1 in the study sites. Four levels of N treatments were applied: (1) control (no N added), (2) low-N (50 kg N ha–1 year–1), (3) medium-N (150 kg N ha–1 year–1), and (4) high-N (300 kg N ha–1 year–1), N additions ranging from 40% to 370% of ambient N deposition. The decomposition processes of ten types of forest litters were then studied. Nitrogen additions significantly decreased the decomposition rates of six types of forest litters. N additions decreased forest litter decomposition, and the mass of residual litter was closely correlated to residual lignin during the decomposition process over the study period. The inhibitory effect of N addition on litter decomposition can be primarily explained by the inhibition of lignin decomposition by exogenous inorganic N. The overall decomposition rate of ten investigated substrates exhibited a significant negative linear relationship with initial tissue C/N and lignin/N, and significant positive relationships with initial tissue K and N concentrations; these relationships exhibited linear and logarithmic curves, respectively. Conclusions/Significance This study suggests that the expected progressive increases in N deposition may have a potential important impact on forest litter decomposition in the study area in the presence of high levels of ambient N deposition. PMID:24551152

  13. Evaluating the addition of positive reinforcement for learning a frightening task: a pilot study with horses.

    PubMed

    Heleski, Camie; Bauson, Laura; Bello, Nora

    2008-01-01

    Horse training often relies upon negative reinforcement (NR). This study tested the hypothesis that adding positive reinforcement (PR) to NR would enhance learning in horses (n = 34) being taught to walk over a tarp (novel/typically frightening task). Subjects were Arabians, and the same person handled all of them. This person handled half "traditionally" (NR only)--that is, halter/lead were pulled; when horse stepped forward, pressure was released; process repeated until criterion met (horse crossed the tarp with little/no obvious anxiety). The same person handled the other half traditionally--but with addition of PR < food + verbal praise > (NR + PR). Subjects "failed" the task if they refused to walk onto the tarp after 10 min. Nine horses failed; 6 of 9 failures were from NR only--no significant difference detected (p = .41). The study detected no difference in time to first crossing of the tarp (p = .30) or total time to achieve calmness criterion (p = .67). Overall, adding PR did not significantly enhance learning this task. However, there were practical implications--adding PR made the task safer/less fatiguing for the handler.

  14. Application of small-diameter inertial grade gyroscopes significantly reduces borehole position uncertainty

    SciTech Connect

    Uttecht, G.W.; de Wardt, J.P.

    1983-02-01

    Initial tests with a new directional survey tool show a significant enhancement in attainable accuracy over conventional instrumentation. Two prototype systems, developed over the last two years by Gyrodata, Inc., have recently been tested in a well in West Texas. Although many more tests are required, preliminary results indicate that the original design objective for borehole position uncertainty less than 1.7 feet per 1,000 feet of hole--has been met. The Gyrodata Wellbore Surveyor employs an inertial grade rate gyro adapted from the aerospace industry. In combination with its other sensors and electronics, the device can sense the orientation of the earth's spin vector at each independent survey station. As a result, the major systematic errors associated with conventional gyros--geographical reference and unaccountable drift--are eliminated. Other sources of inaccuracy are minimized by the system's measuring techniques and operational procedures, and additional benefits should arise from faster survey speed and increased reliability. A true north reference device can also employ a small outside diameter since it requires only one gyro and one accelerometer, rather than the two or three of each needed in an inertial navigation system.

  15. Significantly improved cyclability of lithium manganese oxide under elevated temperature by an easily oxidized electrolyte additive

    NASA Astrophysics Data System (ADS)

    Zhu, Yunmin; Rong, Haibo; Mai, Shaowei; Luo, Xueyi; Li, Xiaoping; Li, Weishan

    2015-12-01

    Spinel lithium manganese oxide, LiMn2O4, is a promising cathode for lithium ion battery in large-scale applications, because it possesses many advantages compared with currently used layered lithium cobalt oxide (LiCoO2) and olivine phosphate (LiFePO4), including naturally abundant resource, environmental friendliness and high and long work potential plateau. Its poor cyclability under high temperature, however, limits its application. In this work, we report a significant cyclability improvement of LiMn2O4 under elevated temperature by using dimethyl phenylphonite (DMPP) as an electrolyte additive. Charge/discharge tests demonstrate that the application of 0.5 wt.% DMPP yields a capacity retention improvement from 16% to 82% for LiMn2O4 after 200 cycles under 55 °C at 1 C (1C = 148 mAh g-1) between 3 and 4.5 V. Electrochemical and physical characterizations indicate that DMPP is electrochemically oxidized at the potential lower than that for lithium extraction, forming a protective cathode interphase on LiMn2O4, which suppresses the electrolyte decomposition and prevents LiMn2O4 from crystal destruction.

  16. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  17. THE CLINICAL SIGNIFICANCE OF A POSITIVE AMNISURE TEST™ IN WOMEN WITH TERM LABOR WITH INTACT MEMBRANES

    PubMed Central

    LEE, Seung Mi; LEE, JoonHo; SEONG, Hyo Suk; LEE, Si Eun; PARK, Joong Shin; ROMERO, Roberto; YOON, Bo Hyun

    2009-01-01

    Objective The Amnisure ROM™ test is approved for the diagnosis of rupture of membranes (ROM). Yet, a fraction of patients with a positive test have intact membranes by sterile speculum examination. The objective of this study was to determine the clinical significance of this finding. Methods The study population consisted of 4 groups of nulliparous women at term: 1) not in labor without clinical evidence of ROM (n=125); 2) in labor without clinical ROM with a negative Amnisure test™ (n=56); 3) in labor without clinical ROM with a positive Amnisure test™ (n=25); and 4) in labor with clinical ROM (n=30). The Amnisure test™ was performed in cases without clinical ROM (Groups 1, 2 and 3). Results 1) The Amnisure test™ was positive more frequently in women in labor with intact membranes than in patients not in labor at term without ROM (30.9% (25/81 women) vs. 4.8% (6/125 women); p<0.001); 2) patients in labor without clinical ROM with a positive Amnisure test™ had a significantly shorter admission-to-delivery interval than those in labor without clinical ROM with a negative Amnisure test™ (p<0.05). Conclusion 1) A positive Amnisure test™ is present in about one-third nulliparous women at term presenting in labor with intact membranes; 2) Patients with a positive Amnisure test™ had a shorter admission-to-delivery interval than those with a negative test. PMID:19350444

  18. Vector Addition: Effect of the Context and Position of the Vectors

    NASA Astrophysics Data System (ADS)

    Barniol, Pablo; Zavala, Genaro

    2010-10-01

    In this article we investigate the effect of: 1) the context, and 2) the position of the vectors, on 2D vector addition tasks. We administered a test to 512 students completing introductory physics courses at a private Mexican university. In the first part, we analyze students' responses in three isomorphic problems: displacements, forces, and no physical context. Students were asked to draw two vectors and the vector sum. We analyzed students' procedures detecting the difficulties when drawing the vector addition and proved that the context matters, not only compared to the context-free case but also between the contexts. In the second part, we analyze students' responses with three different arrangements of the sum of two vectors: tail-to-tail, head-to-tail and separated vectors. We compared the frequencies of the errors in the three different positions to deduce students' conceptions in the addition of vectors.

  19. Comment on the significance of positive carcinogenicity studies using gavage as the route of exposure.

    PubMed Central

    Perera, F; Brennan, T; Fouts, J R

    1989-01-01

    There is continuing controversy, extending into regulatory matters, over the significance to human health of positive results in carcinogenicity studies in animals using the gavage technique as the route of exposure. Our review of a nonrandom sample of 117 chemicals or chemical processes listed as known or reasonably anticipated to be carcinogenic in the National Toxicology Program's Third Annual Report on Carcinogens provides support for the validity of the gavage route in such studies. Twenty-three chemicals among the 117 substances and processes listed were positive by gavage. Twenty of these 23 chemicals were also appropriately studied by at least one other route of exposure. Thus, we were able to evaluate the extent to which positive gavage results were confirmed by another route of exposure in this sample. Nineteen (or 95%) of the twenty chemicals were positive for carcinogenicity by at least one other nongavage route in carcinogenicity bioassays. Moreover, in each of these 19 cases, positive carcinogenesis results were obtained by a nongavage route in the same species of animal where gavage administration led to the induction of cancer. All of the 23 gavage-positive chemicals induced tumors distal to the site of administration in at least one study, as did all 15 chemicals which were also positive by subcutaneous injection. We emphasize, however, the limited scope of our survey. We have not evaluated all chemicals that have tested positive by gavage and by at least one alternative route, nor have we assessed those chemicals found to be negative by the gavage route.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2707209

  20. Comment on the significance of positive carcinogenicity studies using gavage as the route of exposure

    SciTech Connect

    Perera, F.; Brennan, T.; Fouts, J.R. )

    1989-02-01

    There is continuing controversy, extending into regulatory matters, over the significance to human health of positive results in carcinogenicity studies in animals using the gavage technique as the route of exposure. This review of a nonrandom sample of 117 chemicals or chemical processes listed as known or reasonably anticipated to be carcinogenic in the National Toxicology Program's Third Annual Report on Carcinogens provides support for the validity of the gavage route in such studies. Twenty-three chemicals among the 117 substances and processes listed were positive by gavage. Twenty of these 23 chemicals were also appropriately studied by at least one other route of exposure. Nineteen or (95%) of the twenty chemicals were positive for carcinogenicity by at least one other nongavage route in carcinogenicity bioassays. All of the 23 gavage-positive chemicals induced tumors distal to the site of administration in at least one study, as did all 15 chemicals which were also positive by subcutaneous injection. The authors emphasize, however, the limited scope of the survey. Despite this limitation, the review suggests that, although gavage may not be the general method of choice for chemical administration, the results of studies wherein this route was employed are meaningful as a basis for assessing potential carcinogenic hazards.

  1. Nitrite addition to acidified sludge significantly improves digestibility, toxic metal removal, dewaterability and pathogen reduction

    NASA Astrophysics Data System (ADS)

    Du, Fangzhou; Keller, Jürg; Yuan, Zhiguo; Batstone, Damien J.; Freguia, Stefano; Pikaar, Ilje

    2016-12-01

    Sludge management is a major issue for water utilities globally. Poor digestibility and dewaterability are the main factors determining the cost for sludge management, whereas pathogen and toxic metal concentrations limit beneficial reuse. In this study, the effects of low level nitrite addition to acidified sludge to simultaneously enhance digestibility, toxic metal removal, dewaterability and pathogen reduction were investigated. Waste activated sludge (WAS) from a full-scale waste water treatment plant was treated at pH 2 with 10 mg NO2‑-N/L for 5 h. Biochemical methane potential tests showed an increase in the methane production of 28%, corresponding to an improvement from 247 ± 8 L CH4/kg VS to 317 ± 1 L CH4/kg VS. The enhanced removal of toxic metals further increased the methane production by another 18% to 360 ± 6 L CH4/kg VS (a total increase of 46%). The solids content of dewatered sludge increased from 14.6 ± 1.4% in the control to 18.2 ± 0.8%. A 4-log reduction for both total coliforms and E. coli was achieved. Overall, this study highlights the potential of acidification with low level nitrite addition as an effective and simple method achieving multiple improvements in terms of sludge management.

  2. Nitrite addition to acidified sludge significantly improves digestibility, toxic metal removal, dewaterability and pathogen reduction

    PubMed Central

    Du, Fangzhou; Keller, Jürg; Yuan, Zhiguo; Batstone, Damien J.; Freguia, Stefano; Pikaar, Ilje

    2016-01-01

    Sludge management is a major issue for water utilities globally. Poor digestibility and dewaterability are the main factors determining the cost for sludge management, whereas pathogen and toxic metal concentrations limit beneficial reuse. In this study, the effects of low level nitrite addition to acidified sludge to simultaneously enhance digestibility, toxic metal removal, dewaterability and pathogen reduction were investigated. Waste activated sludge (WAS) from a full-scale waste water treatment plant was treated at pH 2 with 10 mg NO2−-N/L for 5 h. Biochemical methane potential tests showed an increase in the methane production of 28%, corresponding to an improvement from 247 ± 8 L CH4/kg VS to 317 ± 1 L CH4/kg VS. The enhanced removal of toxic metals further increased the methane production by another 18% to 360 ± 6 L CH4/kg VS (a total increase of 46%). The solids content of dewatered sludge increased from 14.6 ± 1.4% in the control to 18.2 ± 0.8%. A 4-log reduction for both total coliforms and E. coli was achieved. Overall, this study highlights the potential of acidification with low level nitrite addition as an effective and simple method achieving multiple improvements in terms of sludge management. PMID:28004811

  3. Positive Selection or Free to Vary? Assessing the Functional Significance of Sequence Change Using Molecular Dynamics

    PubMed Central

    Allison, Jane R.; Lechner, Marcus; Hoeppner, Marc P.; Poole, Anthony M.

    2016-01-01

    Evolutionary arms races between pathogens and their hosts may be manifested as selection for rapid evolutionary change of key genes, and are sometimes detectable through sequence-level analyses. In the case of protein-coding genes, such analyses frequently predict that specific codons are under positive selection. However, detecting positive selection can be non-trivial, and false positive predictions are a common concern in such analyses. It is therefore helpful to place such predictions within a structural and functional context. Here, we focus on the p19 protein from tombusviruses. P19 is a homodimer that sequesters siRNAs, thereby preventing the host RNAi machinery from shutting down viral infection. Sequence analysis of the p19 gene is complicated by the fact that it is constrained at the sequence level by overprinting of a viral movement protein gene. Using homology modeling, in silico mutation and molecular dynamics simulations, we assess how non-synonymous changes to two residues involved in forming the dimer interface—one invariant, and one predicted to be under positive selection—impact molecular function. Interestingly, we find that both observed variation and potential variation (where a non-synonymous change to p19 would be synonymous for the overprinted movement protein) does not significantly impact protein structure or RNA binding. Consequently, while several methods identify residues at the dimer interface as being under positive selection, MD results suggest they are functionally indistinguishable from a site that is free to vary. Our analyses serve as a caveat to using sequence-level analyses in isolation to detect and assess positive selection, and emphasize the importance of also accounting for how non-synonymous changes impact structure and function. PMID:26871901

  4. Review of null hypothesis significance testing in the ophthalmic literature: are most 'significant' P values false positives?

    PubMed

    Sanfilippo, Paul G; Casson, Robert J; Yazar, Seyhan; Mackey, David A; Hewitt, Alex W

    2016-01-01

    P values associated with null hypothesis significance testing (NHST) are almost universal in the ophthalmic literature. A P value < 0.05 is traditionally considered 'significant'. This concept may deflect further thought about the veracity of the results. P values influence the publishability of the data and have flow-on effects for funding success and the direction of future research. Despite their importance, the problems inherent in P values have been recognized since their inception, and in more recent years have been increasingly highlighted in some scientific fields. In this review, we aim to bring the problems associated with P values and NHST to the attention of the ophthalmic research community. We do not offer a universal solution to the problem of determining the veracity of a scientific claim; however, we demonstrate the need for caution in interpreting 'significant' P values by performing a Bayesian re-analysis of t-tests in the ophthalmic literature.

  5. Injection Route and TLR9 Agonist Addition Significantly Impact Heroin Vaccine Efficacy

    PubMed Central

    2015-01-01

    Active immunization is an effective means of blocking the pharmacodynamic effects of drugs and holds promise as a treatment for heroin addiction. Previously, we demonstrated the efficacy of our first-generation vaccine in blocking heroin self-administration in rats, however, many vaccine components can be modified to further improve performance. Herein we examine the effects of varying heroin vaccine injection route and adjuvant formulation. Mice immunized via subcutaneous (sc) injection exhibited inferior anti-heroin titers compared to intraperitoneal (ip) and sc/ip coadministration injection routes. Addition of TLR9 agonist cytosine-guanine oligodeoxynucleotide 1826 (CpG ODN 1826) to the original alum adjuvant elicited superior antibody titers and opioid affinities compared to alum alone. To thoroughly assess vaccine efficacy, full dose–response curves were generated for heroin-induced analgesia in both hot plate and tail immersion tests. Mice treated with CpG ODN 1826 exhibited greatly shifted dose–response curves (10–13-fold vs unvaccinated controls) while non-CpG ODN vaccine groups did not exhibit the same robust effect (2–7-fold shift for ip and combo, 2–3-fold shift for sc). Our results suggest that CpG ODN 1826 is a highly potent adjuvant, and injection routes should be considered for development of small molecule–protein conjugate vaccines. Lastly, this study has established a new standard for assessing drugs of abuse vaccines, wherein a full dose–response curve should be performed in an appropriate behavioral task. PMID:24517171

  6. Extra-nodal extension is a significant prognostic factor in lymph node positive breast cancer

    PubMed Central

    Aziz, Sura; Wik, Elisabeth; Davidsen, Benedicte; Aas, Hans; Aas, Turid; Akslen, Lars A.

    2017-01-01

    Presence of lymph node (LN) metastasis is a strong prognostic factor in breast cancer, whereas the importance of extra-nodal extension and other nodal tumor features have not yet been fully recognized. Here, we examined microscopic features of lymph node metastases and their prognostic value in a population-based cohort of node positive breast cancer (n = 218), as part of the prospective Norwegian Breast Cancer Screening Program NBCSP (1996–2009). Sections were reviewed for the largest metastatic tumor diameter (TD-MET), nodal afferent and efferent vascular invasion (AVI and EVI), extra-nodal extension (ENE), number of ENE foci, as well as circumferential (CD-ENE) and perpendicular (PD-ENE) diameter of extra-nodal growth. Number of positive lymph nodes, EVI, and PD-ENE were significantly increased with larger primary tumor (PT) diameter. Univariate survival analysis showed that several features of nodal metastases were associated with disease-free (DFS) or breast cancer specific survival (BCSS). Multivariate analysis demonstrated an independent prognostic value of PD-ENE (with 3 mm as cut-off value) in predicting DFS and BCSS, along with number of positive nodes and histologic grade of the primary tumor (for DFS: P = 0.01, P = 0.02, P = 0.01, respectively; for BCSS: P = 0.02, P = 0.008, P = 0.02, respectively). To conclude, the extent of ENE by its perpendicular diameter was independently prognostic and should be considered in line with nodal tumor burden in treatment decisions of node positive breast cancer. PMID:28199370

  7. Significance of positive or negative thallium-201 scintigraphy in hypertrophic cardiomyopathy

    SciTech Connect

    von Dohlen, T.W.; Prisant, L.M.; Frank, M.J. )

    1989-09-01

    Myocardial ischemia, fibrosis and infarction may occur in patients with hypertrophic cardiomyopathy (HC) in the absence of epicardial coronary artery disease. To determine their prevalence and relation with common characteristics, stress thallium-201 scintigraphy was performed in 28 patients. Eleven (39%) had positive scans despite normal epicardial coronary arteries (7 patients) or a pretest risk of coronary disease less than or equal to 5% (4 patients). There was no relation between thallium defects and age, sex, chest pain or outflow tract gradients at rest. However, the mean left ventricular ejection fraction was significantly lower in those with perfusion abnormalities compared with those without (64 +/- 15 vs 75 +/- 11%, respectively, p less than 0.05). Also, the mean ventricular septal thickness was greater in patients with positive scans (27 +/- 7 vs 21 +/- 6 mm, p less than 0.05), and there was a nonparametric relation between increasing septal thickness and the frequency of positive scans (p less than 0.025). Seven of 11 patients with positive scans had ventricular tachycardia compared with none among those who had negative scans (p less than 0.001), and 5 of these 11 patients had conduction system disease requiring permanent pacemaker insertion compared with 1 of 17 with negative scans (p less than 0.025). It is concluded that thallium perfusion abnormalities are common in patients with HC in the absence of epicardial coronary disease, and are strongly associated with potentially lethal arrhythmias. Thallium scintigraphy appears to identify a subset of patients with HC at increased risk for sudden death, who therefore require closer follow-up.

  8. Clinical Significance of Commensal Gram-Positive Rods Routinely Isolated from Patient Samples.

    PubMed

    Leal, Sixto M; Jones, Melissa; Gilligan, Peter H

    2016-12-01

    Commensal bacteria from the skin and mucosal surfaces are routinely isolated from patient samples and considered contaminants. The majority of these isolates are catalase-positive Gram-positive rods from multiple genera routinely classified as diphtheroids. These organisms can be seen upon Gram staining of clinical specimens or can be isolated as the predominant or pure species in culture, raising a priori suspicion of a possible involvement in infection. With the development and adoption of matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS), suspicious isolates are now routinely identified to the species level. In this study, we performed a retrospective data review (2012 to 2015) and utilized site-specific laboratory criteria and chart reviews to identify species within the diphtheroid classification representative of true infection versus contamination. Our data set included 762 isolates from 13 genera constituting 41 bacterial species. Only 18% represented true infection, and 82% were deemed contaminants. Clinically significant isolates were identified in anaerobic wounds (18%), aerobic wounds (30%), blood (5.5%), urine (22%), cerebrospinal fluid (24%), ophthalmologic cultures (8%), and sterile sites (20%). Organisms deemed clinically significant included multiple Actinomyces species in wounds, Propionibacterium species in joints and cerebrospinal fluid associated with central nervous system hardware, Corynebacterium kroppenstedtii (100%) in breast, and Corynebacterium striatum in multiple sites. Novel findings include clinically significant urinary tract infections by Actinomyces neuii (21%) and Corynebacterium aurimucosum (21%). Taken together, these findings indicate that species-level identification of diphtheroids isolated with a priori suspicion of infection is essential to accurately determine whether an isolate belongs to a species associated with specific types of infection.

  9. Rates of False-Positive Classification Resulting From the Analysis of Additional Embedded Performance Validity Measures.

    PubMed

    Silk-Eglit, Graham M; Stenclik, Jessica H; Miele, Andrea S; Lynch, Julie K; McCaffrey, Robert J

    2015-01-01

    Several studies have documented improvements in the classification accuracy of performance validity tests (PVTs) when they are combined to form aggregated models. Fewer studies have evaluated the impact of aggregating additional PVTs and changing the classification threshold within these models. A recent Monte Carlo simulation demonstrated that to maintain a false-positive rate (FPR) of ≤.10, only 1, 4, 8, 10, and 15 PVTs should be analyzed at classification thresholds of failing at least 1, at least 2, at least 3, at least 4, and at least 5 PVTs, respectively. The current study sought to evaluate these findings with embedded PVTs in a sample of real-life litigants and to highlight a potential danger in analytic flexibility with embedded PVTs. Results demonstrated that to maintain an FPR of ≤.10, only 3, 7, 10, 14, and 15 PVTs should be analyzed at classification thresholds of failing at least 1, at least 2, at least 3, at least 4, and at least 5 PVTs, respectively. Analyzing more than these numbers of PVTs resulted in a dramatic increase in the FPR. In addition, in the most extreme case, flexibility in analyzing and reporting embedded PVTs increased the FPR by 67%. Given these findings, a more objective approach to analyzing and reporting embedded PVTs should be introduced.

  10. The Clinical Significance of CD169-Positive Lymph Node Macrophage in Patients with Breast Cancer

    PubMed Central

    Yamamoto-Ibusuki, Mutsuko; Yamamoto, Yutaka; Iwase, Hirotaka; Takeya, Motohiro; Komohara, Yoshihiro

    2016-01-01

    The immune status of patients can impact on the clinical course of cancer. Lymph node (LN) macrophages play critical roles in anti-cancer immunity via the activation of cytotoxic T-lymphocytes (CTLs). In this study, the prognostic significance of CD169+ LN macrophages was examined in patients with breast cancer. For this purpose the number of CD169+ cells and their ratio relative to total macrophages (CD68+) in regional LNs (RLNs), as well as the number of CD8+ CTLs in tumor tissues, were investigated using immunohistochemistry of paraffin-embedded tissue samples from 146 patients with breast cancer. The association of these data with clinicopathological factors was then analyzed. The number of cells positive for the pan-macrophage marker CD68 remained relatively uniform, while the number of CD169+ cells varied across all cases. Moreover, a high density of CD169+ cells correlated with early clinical stage and no LN metastasis, while a higher CD169+ to CD68+ ratio was significantly associated with small tumor size and a low Ki-67+ rate. There was also a significant correlation between the number of CD8+ CTLs and that of CD169+ macrophages in high grade breast cancer cases with a Ki-67 index greater than 40%. However, neither the density nor the ratio of CD169+ cells, nor the density of CD8+ CTLs, were associated with relapse-free survival, distant relapse-free survival, or breast cancer-specific survival. These findings suggest that CD169+ macrophages in RLNs might be a useful marker for assessing clinical stage, including LN states, in patients with breast cancer. PMID:27861544

  11. Significance and management of positive surgical margins at the time of radical prostatectomy

    PubMed Central

    Silberstein, Jonathan L.; Eastham, James A.

    2014-01-01

    Positive surgical margins (PSM) at the time of radical prostatectomy (RP) result in an increased risk of biochemical recurrence (BCR) and secondary treatment. We review current literature with a focus on stratifying the characteristics of the PSM that may define its significance, the impact of modern imaging and surgical approaches in avoidance of PSM, and management strategies when PSM do occur. We performed a review of the available literature to identify factors associated with PSM and their management. PSM have been repeatedly demonstrated to be associated with an increased risk of BCR following RP. The specific characteristics (size, number, location, Gleason score at the margin) of the PSM may influence the risk of recurrence. Novel imaging and surgical approaches are being investigated and may allow for reductions of PSM in the future. The use of adjuvant treatment for a PSM remains controversial and should be decided on an individual basis after a discussion about the risks and benefits. The goal of RP is complete resection of the tumor. PSM are associated with increased risk of BCR and secondary treatments. Of the risk factors associated with BCR after RP, a PSM is directly influenced by surgical technique. PMID:25378825

  12. Significance and management of positive surgical margins at the time of radical prostatectomy.

    PubMed

    Silberstein, Jonathan L; Eastham, James A

    2014-10-01

    Positive surgical margins (PSM) at the time of radical prostatectomy (RP) result in an increased risk of biochemical recurrence (BCR) and secondary treatment. We review current literature with a focus on stratifying the characteristics of the PSM that may define its significance, the impact of modern imaging and surgical approaches in avoidance of PSM, and management strategies when PSM do occur. We performed a review of the available literature to identify factors associated with PSM and their management. PSM have been repeatedly demonstrated to be associated with an increased risk of BCR following RP. The specific characteristics (size, number, location, Gleason score at the margin) of the PSM may influence the risk of recurrence. Novel imaging and surgical approaches are being investigated and may allow for reductions of PSM in the future. The use of adjuvant treatment for a PSM remains controversial and should be decided on an individual basis after a discussion about the risks and benefits. The goal of RP is complete resection of the tumor. PSM are associated with increased risk of BCR and secondary treatments. Of the risk factors associated with BCR after RP, a PSM is directly influenced by surgical technique.

  13. Schoolwide Positive Behavior Supports and Students with Significant Disabilities: Where Are We?

    ERIC Educational Resources Information Center

    Kurth, Jennifer A.; Enyart, Matt

    2016-01-01

    Although the number of schools implementing schoolwide positive behavior supports (SWPBS) has increased dramatically, the inclusion of students with severe disabilities in these efforts remains negligible. This article describes the evolution of positive behavior intervention and supports into the SWPBS approach used in many schools today,…

  14. Applying Cases to Solve Ethical Problems: The Significance of Positive and Process-Oriented Reflection

    PubMed Central

    Antes, Alison L.; Thiel, Chase E.; Martin, Laura E.; Stenmark, Cheryl K.; Connelly, Shane; Devenport, Lynn D.; Mumford, Michael D.

    2015-01-01

    This study examined the role of reflection on personal cases for making ethical decisions with regard to new ethical problems. Participants assumed the position of a business manager in a hypothetical organization and solved ethical problems that might be encountered. Prior to making a decision for the business problems, participants reflected on a relevant ethical experience. The findings revealed that application of material garnered from reflection on a personal experience was associated with decisions of higher ethicality. However, whether the case was viewed as positive or negative, and whether the outcomes, process, or outcomes and processes embedded in the experience were examined, influenced the application of case material to the new problem. As expected, examining positive experiences and the processes involved in those positive experiences resulted in greater application of case material to new problems. Future directions and implications for understanding ethical decision-making are discussed. PMID:26257506

  15. A significant positive correlation between endogenous trans-zeatin content and total arsenic in arsenic hyperaccumulator Pteris cretica var. nervosa.

    PubMed

    Zhang, Xuemei; Yang, Xiaoyan; Wang, Hongbin; Li, Qinchun; Wang, Haijuan; Li, Yanyan

    2017-04-01

    A pot experiment was conducted to compare the content of endogenous trans-zeatin (Z), plant arsenic (As) uptake and physiological indices in the fronds of As-hyperaccumulator (Pteris cretica var. nervosa) and non-hyperaccumulator (Pteris ensiformis). Furthermore, a stepwise regression method was used to study the relationship among determined indices, and the time-course effect of main indices was also investigated under 100mg/kg As stress with time extension. In the 100-200mg/kg As treatments, plant height showed no significant difference and endogenous Z content significantly increased in P. cretica var. nervosa compared to the control, but a significant decrease of height and endogenous Z was observed in P. ensiformis. The concentrations of As (III) and As (V) increased significantly in the fronds of two plants, but this increase was much higher in P. cretica var. nervosa. Compared to the control, the contents of chlorophyll and soluble protein were significantly increased in P. cretica var. nervosa but decreased in P. ensiformis in the 200mg/kg As treatment, respectively. A significant positive correlation was found between the contents of endogenous Z and total As in P. cretica var. nervosa, but such a correlation was not found in P. ensiformis. Additionally, in the time-course effect experiment, a peak value of each index was appeared in the 43rd day in two plants, except for chlorophyll in P. ensiformis, but this value was significantly higher in P. cretica var. nervosa than that in P. ensiformis. In conclusion, a higher endogenous Z content contributed to As accumulation of P. cretica var. nervosa under As stress.

  16. The Clinical Significance of the Biological False Positive Serologic Reactor: A Study of 113 Cases

    PubMed Central

    Knight, Allan; Wilkinson, R. D.

    1963-01-01

    Biological false positive serologic reactors were studied during a long-term follow-up of asymptomatic patients with chronic false positive serology for syphilitic reagin. This was done with a view to facilitating the early diagnosis of systemic disease, particularly collagen disorders, which are frequently associated with this finding in women. One hundred and thirteen cases were studied. Thirty-eight were “acute”, i.e. positive for less than six months, 58 were “chronic”, i.e. positive for more than six months, and the remainder still positive but followed for less than six months. Of 39 female chronic reactors, 10 were diagnosed as having collagen disease, and in six the BFP reaction preceded clinical diagnosis of the disease. Five had no apparent disease. In 19 male chronic reactors, there was no evidence of collagen disorders and five were free of any recognizable pathology. The remainder in both sexes were found to have a wide variety of systemic illnesses. PMID:14033756

  17. Significance of a Positive Toxoplasma Immunoglobulin M Test Result in the United States

    PubMed Central

    Gajurel, Kiran; Pomares, Christelle; Talucod, Jeanne; Press, Cynthia J.

    2015-01-01

    A positive Toxoplasma immunoglobulin M (IgM) result is often interpreted as a marker of an acute infection. However, IgM can persist for several years, and Toxoplasma commercial IgM diagnostic test kits can yield a number of false-positive results. For these reasons, a chronic Toxoplasma infection can be erroneously classified as an acute infection, resulting in serious adverse consequences, especially in pregnant women, leading to emotional distress and unnecessary interventions, including termination of pregnancy. Interpretation of Toxoplasma serology at a reference laboratory can help differentiate a recently acquired infection from a chronic infection. Serological test results for 451 patients with positive Toxoplasma IgM and IgG test results obtained at nonreference laboratories (NRLs) that were referred to Palo Alto Medical Foundation Toxoplasma Serology Laboratory (PAMF-TSL) to determine whether the patient was acutely or chronically infected were retrospectively reviewed. PAMF-TSL results established that of the 451 patients, 335 (74%) had a chronic infection, 100 (22%) had an acute infection, and 7 (2%) were not infected, and for 9 (2%), results were indeterminate. Positive Toxoplasma IgM and IgG test results obtained at NRLs cannot accurately distinguish between acute and chronic infections. To do so, testing at reference laboratories is required, as mandated in 1997 in a letter from the Food and Drug Administration (FDA) to clinicians and laboratories in the United States. PMID:26354818

  18. Significance of a Positive Toxoplasma Immunoglobulin M Test Result in the United States.

    PubMed

    Dhakal, Reshika; Gajurel, Kiran; Pomares, Christelle; Talucod, Jeanne; Press, Cynthia J; Montoya, Jose G

    2015-11-01

    A positive Toxoplasma immunoglobulin M (IgM) result is often interpreted as a marker of an acute infection. However, IgM can persist for several years, and Toxoplasma commercial IgM diagnostic test kits can yield a number of false-positive results. For these reasons, a chronic Toxoplasma infection can be erroneously classified as an acute infection, resulting in serious adverse consequences, especially in pregnant women, leading to emotional distress and unnecessary interventions, including termination of pregnancy. Interpretation of Toxoplasma serology at a reference laboratory can help differentiate a recently acquired infection from a chronic infection. Serological test results for 451 patients with positive Toxoplasma IgM and IgG test results obtained at nonreference laboratories (NRLs) that were referred to Palo Alto Medical Foundation Toxoplasma Serology Laboratory (PAMF-TSL) to determine whether the patient was acutely or chronically infected were retrospectively reviewed. PAMF-TSL results established that of the 451 patients, 335 (74%) had a chronic infection, 100 (22%) had an acute infection, and 7 (2%) were not infected, and for 9 (2%), results were indeterminate. Positive Toxoplasma IgM and IgG test results obtained at NRLs cannot accurately distinguish between acute and chronic infections. To do so, testing at reference laboratories is required, as mandated in 1997 in a letter from the Food and Drug Administration (FDA) to clinicians and laboratories in the United States.

  19. Effect of a mineral additive on the electrical performances of the positive plate of lead acid battery

    NASA Astrophysics Data System (ADS)

    Foudia, M.; Matrakova, M.; Zerroual, L.

    2015-04-01

    The objective of this work is to improve the performance of the positive electrode of lead-acid battery. The use of the additive in the positive paste is to increase the capacity and cycle life of the positive active material. Mineral porous additives, dispersed uniformly in the PAM, may act as acid reservoirs and favor the ionic diffusion. The results show that the addition of mineral additive in the paste before oxidation influences the composition and the crystal size of the PAM after oxidation. We observe a remarkable improvement of the discharge capacity of the PAM for an amount of additive ranging between 1 and 5%. Nano-sized particles of PbO2 with amorphous character are obtained. XRD, TG and DSC, SEM, and galvanostatic discharge were used as techniques of investigation.

  20. Identification of the most significant electrode positions in electromyographic evaluation of swallowing-related movements in humans.

    PubMed

    Zaretsky, E; Pluschinski, P; Sader, R; Birkholz, P; Neuschaefer-Rube, C; Hey, Christiane

    2017-02-01

    Surface electromyography (sEMG) is a well-established procedure for recording swallowing-related muscle activities. Because the use of a large number of sEMG channels is time consuming and technically sophisticated, the aim of this study was to identify the most significant electrode positions associated with oropharyngeal swallowing activities. Healthy subjects (N = 16) were tested with a total of 42 channels placed in M. masseter, M. orbicularis oris, submental and paralaryngeal regions. Each test subject swallowed 10 ml of water five times. After having identified 16 optimal electrode positions, that is, positions with the strongest signals quantified by the highest integral values, differences to 26 other ones were determined by a Mann-Whitney U test. Kruskal-Wallis H test was utilized for the analysis of differences between single subjects, subject subgroups, and single electrode positions. Factors associated with sEMG signals were examined in a linear regression. Sixteen electrode positions were chosen by a simple ranking of integral values. These positions delivered significantly higher signals than the other 26 positions. Differences between single electrode positions and between test subjects were also significant. Sixteen most significant positions were identified which represent swallowing-related muscle potentials in healthy subjects.

  1. Does the addition of writing into a pharmacy communication skills course significantly impact student communicative learning outcomes? A pilot study.

    PubMed

    Lonie, John M; Rahim, Hamid

    2010-12-01

    The objective of this study was to determine if the addition of a reflective writing component in a fourth year (P-2) pharmacy communication skills course would significantly affect 2 measures of learning: (1) objective multiple choice examination questions and (2) a patient counseling Objective Structured Clinical Examination (OSCE) score. Using a nonequivalent group quasi-experimental retrospective comparison design, 98 randomly selected final examination scores from students taking a non-writing intensive (NWI) communication skills course were compared with 112 randomly selected final examination scores from students that took a communication skills course in which students engaged in several reflective writing assignments. In addition, 91 randomly selected patient counseling OSCE scores from a NWI course were statistically compared with 112 scores from students that took the writing intensive (WI) course. There were statistically significant improvements in multiple choice examination scores in the group that took the reflective writing communication skills course. There was not a statistically significant difference in patient counseling OSCE scores after students completed the WI course. Studying the effects of using reflective writing assignments in communication skills courses may improve the retention and retrieval of information presented within the course.

  2. Mechanical and Electrical Properties of a Polyimide Film Significantly Enhanced by the Addition of Single-Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Meador, Michael A.

    2005-01-01

    Single-wall carbon nanotubes have been shown to possess a combination of outstanding mechanical, electrical, and thermal properties. The use of carbon nanotubes as an additive to improve the mechanical properties of polymers and/or enhance their thermal and electrical conductivity has been a topic of intense interest. Nanotube-modified polymeric materials could find a variety of applications in NASA missions including large-area antennas, solar arrays, and solar sails; radiation shielding materials for vehicles, habitats, and extravehicular activity suits; and multifunctional materials for vehicle structures and habitats. Use of these revolutionary materials could reduce vehicle weight significantly and improve vehicle performance and capabilities.

  3. The Lower Silurian Osmundsberg K-bentonite. Part I: Stratigraphic position, distribution, and palaeogeographic significance

    USGS Publications Warehouse

    Bergstrom, Stig M.; Huff, W.D.; Kolata, Dennis R.

    1998-01-01

    A large number of Lower Silurian (Llandovery) K-bentonite beds have been recorded from northwestern Europe, particularly in Baltoscandia and the British Isles, but previous attempts to trace single beds regionally have yielded inconclusive results. The present study suggests that based on its unusual thickness, stratigraphic position and trace element geochemistry, one Telychian ash bed, the Osmundsberg K-bentonite, can be recognized at many localities in Estonia, Sweden and Norway and probably also in Scotland and Northern Ireland. This bed, which is up to 115 cm thick, is in the lower-middle turriculatus Zone. The stratigraphic position, thickness variation and geographic distribution of the Osmundsberg K-bentonite are illustrated by means of 12 selected Llandovery successions in Sweden, Estonia, Norway, Denmark, Scotland and Northern Ireland. In Baltoscandia, the Osmundsberg K-bentonite shows a trend of general thickness increase in a western direction suggesting that its source area was located in the northern Iapetus region between Baltica and Laurentia. Because large-magnitude ash falls like the one that produced the Osmundsberg K-bentonite last at most a few weeks, such an ash bed may be used as a unique time-plane for a variety of regional geological and palaeontological studies.

  4. Metallic sulfide additives for positive electrode material within a secondary electrochemical cell

    DOEpatents

    Walsh, William J.; McPheeters, Charles C.; Yao, Neng-ping; Koura, Kobuyuki

    1976-01-01

    An improved active material for use within the positive electrode of a secondary electrochemical cell includes a mixture of iron disulfide and a sulfide of a polyvalent metal. Various metal sulfides, particularly sulfides of cobalt, nickel, copper, cerium and manganese, are added in minor weight proportion in respect to iron disulfide for improving the electrode performance and reducing current collector requirements.

  5. Ammonia-oxidizing archaea respond positively to inorganic nitrogen addition in desert soils.

    PubMed

    Marusenko, Yevgeniy; Garcia-Pichel, Ferran; Hall, Sharon J

    2015-02-01

    In soils, nitrogen (N) addition typically enhances ammonia oxidation (AO) rates and increases the population density of ammonia-oxidizing bacteria (AOB), but not that of ammonia-oxidizing archaea (AOA). We asked if long-term inorganic N addition also has similar consequences in arid land soils, an understudied yet spatially ubiquitous ecosystem type. Using Sonoran Desert top soils from between and under shrubs within a long-term N-enrichment experiment, we determined community concentration-response kinetics of AO and measured the total and relative abundance of AOA and AOB based on amoA gene abundance. As expected, N addition increased maximum AO rates and the abundance of bacterial amoA genes compared to the controls. Surprisingly, N addition also increased the abundance of archaeal amoA genes. We did not detect any major effects of N addition on ammonia-oxidizing community composition. The ammonia-oxidizing communities in these desert soils were dominated by AOA as expected (78% of amoA gene copies were related to Nitrososphaera), but contained unusually high contributions of Nitrosomonas (18%) and unusually low numbers of Nitrosospira (2%). This study highlights unique traits of ammonia oxidizers in arid lands, which should be considered globally in predictions of AO responses to changes in N availability.

  6. UnLINCing the nuclear envelope: towards an understanding of the physiological significance of nuclear positioning

    PubMed Central

    Razafsky, David; Zang, Shulun; Hodzic, Didier

    2017-01-01

    Appropriate tissue morphogenesis strictly requires the developmental regulation of different types of nuclear movements. LINC (linker of nucleoskeleton and cytoskeleton) complexes are macromolecular scaffolds that span the nuclear envelope and physically connect the nuclear interior to different cytoskeletal elements and molecular motors, thereby playing essential roles in nucleokinesis. Recent studies dedicated to the in vivo disruption of LINC complexes not only confirmed their widespread role in nuclear dynamics, but also led to a vigorous regain of interest in the physiological relevance of nuclear positioning within cells and syncitia. In the present paper, we review the results of LINC complex disruption in vivo across different organisms and the potential implications of observed phenotypes in human diseases. PMID:22103527

  7. Significance of the Resonance Condition for Controlling the Seam Position in Laser-assisted TIG Welding

    NASA Astrophysics Data System (ADS)

    Emde, B.; Huse, M.; Hermsdorf, J.; Kaierle, S.; Wesling, V.; Overmeyer, L.; Kozakov, R.; Uhrlandt, D.

    As an energy-preserving variant of laser hybrid welding, laser-assisted arc welding uses laser powers of less than 1 kW. Recent studies have shown that the electrical conductivity of a TIG welding arc changes within the arc in case of a resonant interaction between laser radiation and argon atoms. This paper presents investigations on how to control the position of the arc root on the workpiece by means of the resonant interaction. Furthermore, the influence on the welding result is demonstrated. The welding tests were carried out on a cooled copper plate and steel samples with resonant and non-resonant laser radiation. Moreover, an analysis of the weld seam is presented.

  8. Investor Outlook: Significance of the Positive LCA2 Gene Therapy Phase III Results.

    PubMed

    Schimmer, Joshua; Breazzano, Steven

    2015-12-01

    Spark Therapeutics recently reported positive phase III results for SPK-RPE65 targeting the treatment of visual impairment caused by RPE65 gene mutations (often referred to as Leber congenital amaurosis type 2, or LCA2, but may include other retinal disorders), marking an important inflection point for the field of gene therapy. The results highlight the ability to successfully design and execute a randomized trial of a gene therapy and also reinforce the potentially predictive nature of early preclinical and clinical data. The results are expected to pave the way for the first approved gene therapy product in the United States and should sustain investor interest and confidence in gene therapy for many approaches, including retina targeting and beyond.

  9. Cocamidopropyl betaine: the significance of positive patch test results in twelve patients.

    PubMed

    Fowler, J F

    1993-11-01

    Cocamidopropyl betaine is a surfactant coming into wide use in shampoos and other cleansing products. Recent reports have implicated it as a potential allergen, although it is less irritating than other surfactants such as sodium lauryl sulfate. Twelve positive patch test results were seen over a period of fifteen months of testing in selected patients. Of these, seven results were thought to be relevant. All seven patients with relevant reactions and four of the five with uncertain relevance had dermatitis of the head and neck area. It is concluded that although cocamidopropyl betaine is not a common allergen, it may be at least partially responsible for some cases of allergic dermatitis of the head and neck.

  10. Abnormal length and position of the sigmoid colon and its clinical significance.

    PubMed

    Nayak, S B; George, B M; Mishra, S

    2012-01-01

    Sigmoid colon is one of the most variable parts of the large intestine. Here we report a very rare type of variation of the sigmoid colon. This variation was observed during the routine dissections for undergraduate medical students at Melaka Manipal Medical College (Manipal Campus) India in September 2012. In the current case, the sigmoid colon was about 60 cms long and made an inverted U shaped loop in front of the descending colon and the left kidney. It had a sigmoid mesocolon which covered the left kidney. The sigmoid colon had an ascending and a descending limb. This position of sigmoid colon and its mesocolon is dangerous as it can get twisted to form a volvulus. It also might cause confusions in radiologic and sigmoidoscopy techniques.

  11. OX40 expression enhances the prognostic significance of CD8 positive lymphocyte infiltration in colorectal cancer

    PubMed Central

    Weixler, Benjamin; Cremonesi, Eleonora; Sorge, Roberto; Muraro, Manuele Giuseppe; Delko, Tarik; Nebiker, Christian A.; Däster, Silvio; Governa, Valeria; Amicarella, Francesca; Soysal, Savas D.; Kettelhack, Christoph; von Holzen, Urs W.; Eppenberger-Castori, Serenella; Spagnoli, Giulio C.; Oertli, Daniel; Iezzi, Giandomenica; Terracciano, Luigi; Tornillo, Luigi

    2015-01-01

    Background OX40 is a TNF receptor family member expressed by activated T cells. Its triggering by OX40 ligand promotes lymphocyte survival and memory generation. Anti-OX40 agonistic monoclonal antibodies (mAb) are currently being tested in cancer immunotherapy. We explored the prognostic significance of tumor infiltration by OX40+ cells in a large colorectal cancer (CRC) collective. Methods OX40 gene expression was analyzed in 50 freshly excised CRC and corresponding healthy mucosa by qRT-PCR. A tissue microarray including 657 clinically annotated CRC specimens was stained with anti-OX40, -CD8 and -FOXP3 mAbs by standard immunohistochemistry. The CRC cohort was randomly split into training and validation sets. Correlations between CRC infiltration by OX40+ cells alone, or in combination with CD8+ or FOXP3+ cells, and clinical-pathological data and overall survival were comparatively evaluated. Results OX40 gene expression in CRC significantly correlated with FOXP3 and CD8 gene expression. High CRC infiltration by OX40+ cells was significantly associated with favorable prognosis in training and validation sets in univariate, but not multivariate, Cox regression analysis. CRC with OX40high/CD8high infiltration were characterized by significantly prolonged overall survival, as compared to tumors with OX40low/CD8high, OX40high/CD8low or OX40low/CD8low infiltration in both uni- and multivariate analysis. In contrast, prognostic significance of OX40+ and FOXP3+ cell infiltration was not enhanced by a combined evaluation. Irrespective of TNM stage, CRC with OX40high/CD8high density infiltrates showed an overall survival similar to that of all stage I CRC included in the study. Conclusions OX40high/CD8high density tumor infiltration represents an independent, favorable, prognostic marker in CRC with an overall survival similar to stage I cancers. PMID:26439988

  12. Amisulpride Augmentation for Clozapine-Refractory Positive Symptoms: Additional Benefit in Reducing Hypersialorrhea

    PubMed Central

    Bogorni, Fabiani; Moreira, Frederico Fernandes; Pimentel, Eduardo Mylius; Grohs, Géder Evandro Motta; Diaz, Alexandre Paim

    2015-01-01

    One-third to half of patients taking clozapine suffer from refractory symptoms despite adequate treatment. Among other adverse effects, clozapine-induced hypersalivation (CIH) occurs in approximately half of all patients. This is a case of a 30-year-old male with refractory schizophrenia; in this patient, the remission of residual positive symptoms, as well as the reduction of CIH, was achieved by treatment with clozapine augmented with amisulpride. PMID:25838958

  13. Tassel Removal Positively Affects Biomass Production Coupled with Significantly Increasing Stem Digestibility in Switchgrass

    PubMed Central

    Zhao, Chunqiao; Fan, Xifeng; Hou, Xincun; Zhu, Yi; Yue, Yuesen; Zhang, Shuang; Wu, Juying

    2015-01-01

    In this study, tassels of Cave-in-Rock (upland) and Alamo (lowland) were removed at or near tassel emergence to explore its effects on biomass production and quality. Tassel-removed (TR) Cave-in-Rock and Alamo both exhibited a significant (P<0.05) increase in plant heights (not including tassel length), tiller number, and aboveground biomass dry weight (10% and 12%, 30% and 13%, 13% and 18%, respectively by variety) compared to a control (CK) treatment. Notably, total sugar yields of TR Cave-in-Rock and Alamo stems increased significantly (P<0.05 or 0.01) by 19% and 19%, 21% and 14%, 52% and 18%, respectively by variety, compared to those of control switchgrass under 3 treatments by direct enzymatic hydrolysis (DEH), enzymatic hydrolysis after 1% NaOH pretreatment (EHAL) and enzymatic hydrolysis after 1% H2SO4 pretreatment (EHAC). These differences were mainly due to significantly (P<0.05 or 0.01) higher cellulose content, lower cellulose crystallinity indexes (CrI) caused by higher arabinose (Ara) substitution in xylans, and lower S/G ratio in lignin. However, the increases of nitrogen (N) and sulphur (S) concentration negatively affects the combustion quality of switchgrass aboveground biomass. This work provides information for increasing biomass production and quality in switchgrass and also facilitates the inhibition of gene dispersal of switchgrass in China. PMID:25849123

  14. Tassel removal positively affects biomass production coupled with significantly increasing stem digestibility in switchgrass.

    PubMed

    Zhao, Chunqiao; Fan, Xifeng; Hou, Xincun; Zhu, Yi; Yue, Yuesen; Zhang, Shuang; Wu, Juying

    2015-01-01

    In this study, tassels of Cave-in-Rock (upland) and Alamo (lowland) were removed at or near tassel emergence to explore its effects on biomass production and quality. Tassel-removed (TR) Cave-in-Rock and Alamo both exhibited a significant (P<0.05) increase in plant heights (not including tassel length), tiller number, and aboveground biomass dry weight (10% and 12%, 30% and 13%, 13% and 18%, respectively by variety) compared to a control (CK) treatment. Notably, total sugar yields of TR Cave-in-Rock and Alamo stems increased significantly (P<0.05 or 0.01) by 19% and 19%, 21% and 14%, 52% and 18%, respectively by variety, compared to those of control switchgrass under 3 treatments by direct enzymatic hydrolysis (DEH), enzymatic hydrolysis after 1% NaOH pretreatment (EHAL) and enzymatic hydrolysis after 1% H2SO4 pretreatment (EHAC). These differences were mainly due to significantly (P<0.05 or 0.01) higher cellulose content, lower cellulose crystallinity indexes (CrI) caused by higher arabinose (Ara) substitution in xylans, and lower S/G ratio in lignin. However, the increases of nitrogen (N) and sulphur (S) concentration negatively affects the combustion quality of switchgrass aboveground biomass. This work provides information for increasing biomass production and quality in switchgrass and also facilitates the inhibition of gene dispersal of switchgrass in China.

  15. Appropriate Fe (II) Addition Significantly Enhances Anaerobic Ammonium Oxidation (Anammox) Activity through Improving the Bacterial Growth Rate

    PubMed Central

    Liu, Yiwen; Ni, Bing-Jie

    2015-01-01

    The application of anaerobic ammonium oxidation (Anammox) process is often limited by the slow growth rate of Anammox bacteria. As the essential substrate element that required for culturing Anammox sludge, Fe (II) is expected to affect Anammox bacterial growth. This work systematically studied the effects of Fe (II) addition on Anammox activity based on the kinetic analysis of specific growth rate using data from batch tests with an enriched Anammox sludge at different dosing levels. Results clearly demonstrated that appropriate Fe (II) dosing (i.e., 0.09 mM) significantly enhanced the specific Anammox growth rate up to 0.172 d−1 compared to 0.118 d−1 at regular Fe (II) level (0.03 mM). The relationship between Fe (II) concentration and specific Anammox growth rate was found to be well described by typical substrate inhibition kinetics, which was integrated into currently well-established Anammox model to describe the enhanced Anammox growth with Fe (II) addition. The validity of the integrated Anammox model was verified using long-term experimental data from three independent Anammox reactors with different Fe (II) dosing levels. This Fe (II)-based approach could be potentially implemented to enhance the process rate for possible mainstream application of Anammox technology, in order for an energy autarchic wastewater treatment. PMID:25644239

  16. Evaluation of additive formulations to inhibit precipitation of positive electrolyte in vanadium battery

    NASA Astrophysics Data System (ADS)

    Rahman, Faizur; Skyllas-Kazacos, M.

    2017-02-01

    A comprehensive study has been performed to develop blended additive formulations based on organic and inorganic compounds to prevent the precipitation of supersaturated V(V) species in the Vanadium Flow Battery at high temperatures around 50 °C. It was found that organic formulations are oxidized by the strong oxidizing effect of V(V) species and are hence ineffective. The inorganic additive formulation KS11 which consists of 1 wt% of K3PO4+ 1 wt% of SHMP appears to be very effective with a vanadium solution of composition 3.5 M V(V) in total sulphate/bisulphate concentration of 5.7 M up to a temperature of 40 °C. The phosphate ions (PO43-) released from K3PO4 and PO3- ions from SHMP (NaPO3)6 are believed to adsorb onto the nucleating ions, thus inhibiting the precipitation of scale forming species, or adsorption onto the growing crystals, deforming and/or inhibiting further formation of vanadium crystals. Although the electrochemical activity of 3.5 M V solutions was unaffected in the presence of the KS11, increasing vanadium concentration above 3.5 M and total sulphate/bisulphate concentration above 6 M is probably increasing the formation of electrochemically inactive complexes of vanadium-sulphate and polyvanadic species. This results in increased solution viscosity and subsequently reduces the electrochemical activity exponentially.

  17. The oxidation of organic additives in the positive vanadium electrolyte and its effect on the performance of vanadium redox flow battery

    NASA Astrophysics Data System (ADS)

    Nguyen, Tam D.; Whitehead, Adam; Scherer, Günther G.; Wai, Nyunt; Oo, Moe O.; Bhattarai, Arjun; Chandra, Ghimire P.; Xu, Zhichuan J.

    2016-12-01

    Despite many desirable properties, the vanadium redox flow battery is limited, in the maximum operation temperature that can be continuously endured, before precipitation begins in the positive electrolyte. Many additives have been proposed to improve the thermal stability of the charged positive electrolyte. However, we have found that the apparent stability, revealed in laboratory testing, is often simply an artifact of the test method and arises from the oxidation of the additive, with corresponding partial reduction of V(V) to V(IV). This does not improve the stability of the electrolyte in an operating system. Here, we examined the oxidation of some typical organic additives with carboxyl, alcohol, and multi-functional groups, in sulfuric acid solutions containing V(V). The UV-vis measurements and titration results showed that many compounds reduced the state-of-charge (SOC) of vanadium electrolyte, for example, by 27.8, 88.5, and 81.9% with the addition of 1%wt of EDTA disodium salt, pyrogallol, and ascorbic acid, respectively. The cell cycling also indicated the effect of organic additives on the cell performance, with significant reduction in the usable charge capacity. In addition, a standard screening method for thermally stable additives was introduced, to quickly screen suitable additives for the positive vanadium electrolyte.

  18. Additive and non-additive effects of mixtures of short-acting intravenous anaesthetic agents and their significance for theories of anaesthesia

    PubMed Central

    Richards, C.D.; White, Ann E.

    1981-01-01

    1 The potency of a series of short-acting anaesthetics was established by measuring the duration of the loss of righting reflex following a single bolus injection into the tail vein of male Wistar rats. The agents were, in order of potency, etomidate, alphaxalone, methohexitone, alphadalone acetate and propanidid. 2 The potency of binary mixtures of these agents was also assessed to see whether the anaesthetic effects of different agents were additive as classical theories of anaesthesia suggest. Mixtures of alphaxalone and alphadalone acetate, alphaxalone and propanidid and methohexitone and propanidid all showed simple additive effects. Mixtures of alphaxalone and etomidate and of alphaxalone and methohexitone showed a greater potency than would be expected if their effects were simply additive. Mixtures of etomidate and methohexitone were not examined. 3 Mixtures of alphaxalone and either methohexitone or pentobarbitone produced a greater depression of synaptic transmission in in vitro preparations of guinea-pig olfactory cortex than would have been expected from the sum of the activities of the individual anaesthetics. Other combinations of anaesthetics did not show similar effects although the interaction between alphaxalone and etomidate was not examined. 4 Neither alphaxalone nor pentobarbitone affected the membrane: buffer partition coefficient of the other for a model membrane system. 5 These results are interpreted as evidence against the classical unitary hypotheses of anaesthetic action based on correlations of anaesthetic potency with lipid solubility and as supporting the view that different anaesthetics act on different structures in the neuronal membranes to produce anaesthesia. PMID:6268237

  19. Significant Change in Marine Plankton Structure and Carbon Production After the Addition of River Water in a Mesocosm Experiment.

    PubMed

    Fouilland, E; Trottet, A; Alves-de-Souza, C; Bonnet, D; Bouvier, T; Bouvy, M; Boyer, S; Guillou, L; Hatey, E; Jing, H; Leboulanger, C; Le Floc'h, E; Liu, H; Mas, S; Mostajir, B; Nouguier, J; Pecqueur, D; Rochelle-Newall, E; Roques, C; Salles, C; Tournoud, M-G; Vasseur, C; Vidussi, F

    2017-03-16

    Rivers are known to be major contributors to eutrophication in marine coastal waters, but little is known on the short-term impact of freshwater surges on the structure and functioning of the marine plankton community. The effect of adding river water, reducing the salinity by 15 and 30%, on an autumn plankton community in a Mediterranean coastal lagoon (Thau Lagoon, France) was determined during a 6-day mesocosm experiment. Adding river water brought not only nutrients but also chlorophyceans that did not survive in the brackish mesocosm waters. The addition of water led to initial increases (days 1-2) in bacterial production as well as increases in the abundances of bacterioplankton and picoeukaryotes. After day 3, the increases were more significant for diatoms and dinoflagellates that were already present in the Thau Lagoon water (mainly Pseudo-nitzschia spp. group delicatissima and Prorocentrum triestinum) and other larger organisms (tintinnids, rotifers). At the same time, the abundances of bacterioplankton, cyanobacteria, and picoeukaryote fell, some nutrients (NH4(+), SiO4(3-)) returned to pre-input levels, and the plankton structure moved from a trophic food web based on secondary production to the accumulation of primary producers in the mesocosms with added river water. Our results also show that, after freshwater inputs, there is rapid emergence of plankton species that are potentially harmful to living organisms. This suggests that flash flood events may lead to sanitary issues, other than pathogens, in exploited marine areas.

  20. School-Wide Positive Behavioral Interventions and Supports: A Snapshot of Implementation in Schools Serving Students with Significant Disabilities

    ERIC Educational Resources Information Center

    Schelling, Amy L.; Harris, Monica L.

    2016-01-01

    Implementation of school-wide positive behavioral interventions and supports (SWPBIS) in K-12 schools is well documented in the literature. However, far less documentation can be found in the literature related to its implementation with students with significant intellectual and other developmental disabilities being served in either typical or…

  1. Prognostic Significance of the Number of Positive Lymph Nodes in Women With T1-2N1 Breast Cancer Treated With Mastectomy: Should Patients With 1, 2, and 3 Positive Lymph Nodes Be Grouped Together?

    SciTech Connect

    Dai Kubicky, Charlotte; Mongoue-Tchokote, Solange

    2013-04-01

    Purpose: To determine whether patients with 1, 2, or 3 positive lymph nodes (LNs) have similar survival outcomes. Methods and Materials: We analyzed the Surveillance, Epidemiology, and End Results registry of breast cancer patients diagnosed between 1990 and 2003. We identified 10,415 women with T1-2N1M0 breast cancer who were treated with mastectomy with no adjuvant radiation, with at least 10 LNs examined and 6 months of follow-up. The Kaplan-Meier method and log–rank test were used for survival analysis. Multivariate analysis was performed using the Cox proportional hazard model. Results: Median follow-up was 92 months. Ten-year overall survival (OS) and cause-specific survival (CSS) were progressively worse with increasing number of positive LNs. Survival rates were 70%, 64%, and 60% (OS), and 82%, 76%, and 72% (CSS) for 1, 2, and 3 positive LNs, respectively. Pairwise log–rank test P values were <.001 (1 vs 2 positive LNs), <.001 (1 vs 3 positive LNs), and .002 (2 vs 3 positive LNs). Multivariate analysis showed that number of positive LNs was a significant predictor of OS and CSS. Hazard ratios increased with the number of positive LNs. In addition, age, primary tumor size, grade, estrogen receptor and progesterone receptor status, race, and year of diagnosis were significant prognostic factors. Conclusions: Our study suggests that patients with 1, 2, and 3 positive LNs have distinct survival outcomes, with increasing number of positive LNs associated with worse OS and CSS. The conventional grouping of 1-3 positive LNs needs to be reconsidered.

  2. A radio/optical reference frame. 5: Additional source positions in the mid-latitude southern hemisphere

    NASA Technical Reports Server (NTRS)

    Russell, J. L.; Reynolds, J. E.; Jauncey, D. L.; De Vegt, C.; Zacharias, N.; Ma, C.; Fey, A. L.; Johnston, K. J.; Hindsley, R.; Hughes, J. A.

    1994-01-01

    We report new accurate radio position measurements for 30 sources, preliminary positions for two sources, improved radio postions for nine additional sources which had limited previous observations, and optical positions and optical-radio differences for six of the radio sources. The Very Long Baseline Interferometry (VLBI) observations are part of the continuing effort to establish a global radio reference frame of about 400 compact, flat spectrum sources, which are evenly distributed across the sky. The observations were made using Mark III data format in four separate sessions in 1988-89 with radio telescopes at Tidbinbilla, Australia, Kauai, USA, and Kashima, Japan. We observed a total of 54 sources, including ten calibrators and three which were undetected. The 32 new source positions bring the total number in the radio reference frame catalog to 319 (172 northern and 147 southern) and fill in the zone -25 deg greater than delta greater than -45 deg which, prior to this list, had the lowest source density. The VLBI positions have an average formal precision of less than 1 mas, although unknown radio structure effects of about 1-2 mas may be present. The six new optical postion measurements are part of the program to obtain positions of the optical counterparts of the radio reference frame source and to map accurately the optical on to the radio reference frames. The optical measurements were obtained from United States Naval Observatory (USNO) Black Birch astrograph plates and source plates from the AAT, and Kitt Peak National Observatory (KPNO) 4 m, and the European Southern Observatory (ESO) Schmidt. The optical positions have an average precision of 0.07 sec, mostly due to the zero point error when adjusted to the FK5 optical frame using the IRS catalog. To date we have measured optical positions for 46 sources.

  3. Positioning.

    ERIC Educational Resources Information Center

    Conone, Ruth M.

    The key to positioning is the creation of a clear benefit image in the consumer's mind. One positioning strategy is creating in the prospect's mind a position that takes into consideration the company's or agency's strengths and weaknesses as well as those of its competitors. Another strategy is to gain entry into a position ladder owned by…

  4. Gluten-free dough-making of specialty breads: Significance of blended starches, flours and additives on dough behaviour.

    PubMed

    Collar, Concha; Conte, Paola; Fadda, Costantino; Piga, Antonio

    2015-10-01

    The capability of different gluten-free (GF) basic formulations made of flour (rice, amaranth and chickpea) and starch (corn and cassava) blends, to make machinable and viscoelastic GF-doughs in absence/presence of single hydrocolloids (guar gum, locust bean and psyllium fibre), proteins (milk and egg white) and surfactants (neutral, anionic and vegetable oil) have been investigated. Macroscopic (high deformation) and macromolecular (small deformation) mechanical, viscometric (gelatinization, pasting, gelling) and thermal (gelatinization, melting, retrogradation) approaches were performed on the different matrices in order to (a) identify similarities and differences in GF-doughs in terms of a small number of rheological and thermal analytical parameters according to the formulations and (b) to assess single and interactive effects of basic ingredients and additives on GF-dough performance to achieve GF-flat breads. Larger values for the static and dynamic mechanical characteristics and higher viscometric profiles during both cooking and cooling corresponded to doughs formulated with guar gum and Psyllium fibre added to rice flour/starch and rice flour/corn starch/chickpea flour, while surfactant- and protein-formulated GF-doughs added to rice flour/starch/amaranth flour based GF-doughs exhibited intermediate and lower values for the mechanical parameters and poorer viscometric profiles. In addition, additive-free formulations exhibited higher values for the temperature of both gelatinization and retrogradation and lower enthalpies for the thermal transitions. Single addition of 10% of either chickpea flour or amaranth flour to rice flour/starch blends provided a large GF-dough hardening effect in presence of corn starch and an intermediate effect in presence of cassava starch (chickpea), and an intermediate reinforcement of GF-dough regardless the source of starch (amaranth). At macromolecular level, both chickpea and amaranth flours, singly added, determined

  5. Significant photoelectric property change caused by additional nano-confinement: a study of half-dimensional nanomaterials.

    PubMed

    Jiang, Chengming; Song, Jinhui

    2014-12-29

    How properties change as 1D nanomaterials reduce in length to 0D, that is, the properties of 0.5D nanomaterial, are studied via photoelectric changes in ZnO nanowires. The photoelectric property of this 0.5D nanomaterial changes significantly as the 3D nanoconfinement is reinforced. This finding can be expanded to more properties and materials to profoundly impact fields of nanoscience, nanodevices, and nanoelectronics.

  6. Prognostic significance of positive peritoneal cytology in resectable pancreatic cancer: a systemic review and meta-analysis.

    PubMed

    Cao, Feng; Li, Jia; Li, Ang; Li, Fei

    2017-01-19

    Although peritoneal cytology has been used to determine pancreatic cancer staging for more than three decades, its prognostic significance in potentially resectable pancreatic cancer is inconclusive. We therefore conducted this meta-analysis to investigate the impact of peritoneal cytology status on the clinicopathological features and survival outcomes in potentially resectable pancreatic cancer. Ten studies were identified for this meta-analysis after searching the PubMed, Web of Science and China National Knowledge Infrastructure (CNKI) electronic databases. Our results showed that positive peritoneal cytology was associated with tumor size (OR 11.65, P = 0.001), tumor location (OR 0.37, P = 0.000), serosal invasion (OR 3.89, P = 0.000), portal vein invasion (OR 1.82, P = 0.016), lymph vessel invasion (OR 2.71, P = 0.026), T stage (OR 2.65, P = 0.037) and N stage (OR 2.34, P = 0.001) in resectable pancreatic cancer. Patients with positive peritoneal cytology demonstrated poor overall survival (OS; HR 3.18, P = 0.000) and disease-free survival (DFS; HR 2.88, P = 0.000) times. Based on our meta-analysis, we conclude that positive peritoneal cytology is an indicator of advanced stage pancreatic cancer with a poor prognosis; hence, radical resection should not be performed on these patients.

  7. A Noise Trimming and Positional Significance of Transposon Insertion System to Identify Essential Genes in Yersinia pestis.

    PubMed

    Yang, Zheng Rong; Bullifent, Helen L; Moore, Karen; Paszkiewicz, Konrad; Saint, Richard J; Southern, Stephanie J; Champion, Olivia L; Senior, Nicola J; Sarkar-Tyson, Mitali; Oyston, Petra C F; Atkins, Timothy P; Titball, Richard W

    2017-02-06

    Massively parallel sequencing technology coupled with saturation mutagenesis has provided new and global insights into gene functions and roles. At a simplistic level, the frequency of mutations within genes can indicate the degree of essentiality. However, this approach neglects to take account of the positional significance of mutations - the function of a gene is less likely to be disrupted by a mutation close to the distal ends. Therefore, a systematic bioinformatics approach to improve the reliability of essential gene identification is desirable. We report here a parametric model which introduces a novel mutation feature together with a noise trimming approach to predict the biological significance of Tn5 mutations. We show improved performance of essential gene prediction in the bacterium Yersinia pestis, the causative agent of plague. This method would have broad applicability to other organisms and to the identification of genes which are essential for competitiveness or survival under a broad range of stresses.

  8. A Noise Trimming and Positional Significance of Transposon Insertion System to Identify Essential Genes in Yersinia pestis

    NASA Astrophysics Data System (ADS)

    Yang, Zheng Rong; Bullifent, Helen L.; Moore, Karen; Paszkiewicz, Konrad; Saint, Richard J.; Southern, Stephanie J.; Champion, Olivia L.; Senior, Nicola J.; Sarkar-Tyson, Mitali; Oyston, Petra C. F.; Atkins, Timothy P.; Titball, Richard W.

    2017-02-01

    Massively parallel sequencing technology coupled with saturation mutagenesis has provided new and global insights into gene functions and roles. At a simplistic level, the frequency of mutations within genes can indicate the degree of essentiality. However, this approach neglects to take account of the positional significance of mutations - the function of a gene is less likely to be disrupted by a mutation close to the distal ends. Therefore, a systematic bioinformatics approach to improve the reliability of essential gene identification is desirable. We report here a parametric model which introduces a novel mutation feature together with a noise trimming approach to predict the biological significance of Tn5 mutations. We show improved performance of essential gene prediction in the bacterium Yersinia pestis, the causative agent of plague. This method would have broad applicability to other organisms and to the identification of genes which are essential for competitiveness or survival under a broad range of stresses.

  9. A Noise Trimming and Positional Significance of Transposon Insertion System to Identify Essential Genes in Yersinia pestis

    PubMed Central

    Yang, Zheng Rong; Bullifent, Helen L.; Moore, Karen; Paszkiewicz, Konrad; Saint, Richard J.; Southern, Stephanie J.; Champion, Olivia L.; Senior, Nicola J.; Sarkar-Tyson, Mitali; Oyston, Petra C. F.; Atkins, Timothy P.; Titball, Richard W.

    2017-01-01

    Massively parallel sequencing technology coupled with saturation mutagenesis has provided new and global insights into gene functions and roles. At a simplistic level, the frequency of mutations within genes can indicate the degree of essentiality. However, this approach neglects to take account of the positional significance of mutations - the function of a gene is less likely to be disrupted by a mutation close to the distal ends. Therefore, a systematic bioinformatics approach to improve the reliability of essential gene identification is desirable. We report here a parametric model which introduces a novel mutation feature together with a noise trimming approach to predict the biological significance of Tn5 mutations. We show improved performance of essential gene prediction in the bacterium Yersinia pestis, the causative agent of plague. This method would have broad applicability to other organisms and to the identification of genes which are essential for competitiveness or survival under a broad range of stresses. PMID:28165493

  10. Significantly enhanced production of acarbose in fed-batch fermentation with the addition of S-adenosylmethionine.

    PubMed

    Sun, Li-Hui; Li, Ming-Gang; Wang, Yuan-Shan; Zheng, Yu-Guo

    2012-06-01

    Acarbose, a pseudo-oligosaccharide, is widely used clinically in therapies for non-insulin-dependent diabetes. In the present study, S-adenosylmethionine (SAM) was added to selected media in order to investigate its effect on acarbose fermentation by Actinoplanes utahensis ZJB- 08196. Acarbose titer was seen to increase markedly when concentrations of SAM were added over a period of time. The effects of glucose and maltose on the production of acarbose were investigated in both batch and fed-batch fermentation. Optimal acarbose production was observed at relatively low glucose levels and high maltose levels. Based on these results, a further fed-batch experiment was designed so as to enhance the production of acarbose. Fed-batch fermentation was carried out at an initial glucose level of 10 g/l and an initial maltose level of 60 g/l. Then, 12 h post inoculation, 100 micromol/l SAM was added. In addition, 8 g/l of glucose was added every 24 h, and 20 g/l of maltose was added at 96 h. By way of this novel feeding strategy, the maximum titer of acarbose achieved was 6,113 mg/l at 192 h. To our knowledge, the production level of acarbose achieved in this study is the highest ever reported.

  11. The use of nanometer tetrabasic lead sulfate as positive active material additive for valve regulated lead-acid battery

    NASA Astrophysics Data System (ADS)

    Lang, Xiaoshi; Wang, Dianlong; Hu, Chiyu; Tang, Shenzhi; Zhu, Junsheng; Guo, Chenfeng

    2014-12-01

    Conventional tetrabasic lead sulfate used as positive active material additive shows the results of the low effective lead dioxide conversion rate due to the large grain size and crossed the crystal structure. In this paper, we study on a type of nanometer tetrabasic lead sulfate. Through the XRD and SEM test and Material Studio software calculation, the purity of tetrabasic lead sulfate is very high, the grain size of the nanometer 4BS is almost unanimous, and can be controlled below 200 nm. When charged and discharged in 1.75 V-2.42 V with the current density of 40 mA g-1, 80 mA g-1 and 160 mA g-1, the effective lead dioxide conversion rate of nanometer 4BS after formation can achieve to 83.48%, 71.42%, and 66.96%. Subsequently, the nanometer 4BS as additive is added to positive paste of lead-acid battery. When the batteries are tested galvanostatically between 1.75 V and 2.42 V at 0.25 C charge and 0.5 C discharge rates at room temperature. The ratio of adding nanometer 4BS is 0%, 1% and 4% and the initial discharge specific capacities are 60 mAh g-1, 65 mAh g-1 and 68 mAh g-1. After 80 cycles, the initial discharge capacity of positive active material with 1% nanometer 4BS decreased less than 10%, while adding 4% nanometer 4BS, the initial discharge capacity doesn't decrease obviously.

  12. Clinical and Prognostic Significance of Positive Hepatojugular Reflux on Discharge in Acute Heart Failure: Insights from the ESCAPE Trial

    PubMed Central

    2017-01-01

    Background. There has been a decline in emphasis of the value of physical examination in heart failure (HF) with increased reliance on cardiac imaging. We aim to study the clinical and prognostic significance of positive hepatojugular reflux (HJR) on discharge in patients hospitalized with HF. Methods. Using the ESCAPE trial data, patients were compared according to the presence or absence of a positive HJR on discharge. The primary study endpoints were all-cause mortality and a composite endpoint of death, rehospitalization, and cardiac transplant during the first 6 months after discharge. Results. Among 392 patients (age: 56 years, 74% men), the HJR correlated well with clinical and objective hemodynamic markers of volume overload including right atrial pressure (RAP, P = 0.002), pulmonary capillary wedge pressure (PCWP, P = 0.006), and inferior vena cava size during inspiration (P = 0.005) and expiration (P = 0.003). The RAP had the highest AUC for predicting a positive HJR on admission (AUC: 0.655, P = 0.004) and discharge (AUC: 0.672, P = 0.001). Cox's proportional hazards analysis revealed that a positive HJR on discharge is an independent predictor of 6-month mortality (estimated hazard ratio: 1.689; 95% CI: 1.032–2.764; P = 0.037) after adjusting for age, baseline creatinine, baseline hematocrit, baseline NYHA class, chronic obstructive pulmonary disease, and the presence of tricuspid regurgitation. Conclusion. The HJR should be routinely checked in patients admitted with acute HF throughout hospitalization and especially on discharge as it serves as an important prognostic marker for postdischarge outcomes. PMID:28316980

  13. The influence of vibration type, frequency, body position and additional load on the neuromuscular activity during whole body vibration.

    PubMed

    Ritzmann, Ramona; Gollhofer, Albert; Kramer, Andreas

    2013-01-01

    This study aimed to assess the influence of different whole body vibration (WBV) determinants on the electromyographic (EMG) activity during WBV in order to identify those training conditions that cause highest neuromuscular responses and therefore provide optimal training conditions. In a randomized cross-over study, the EMG activity of six leg muscles was analyzed in 18 subjects with respect to the following determinants: (1) vibration type (side-alternating vibration (SV) vs. synchronous vibration (SyV), (2) frequency (5-10-15-20-25-30 Hz), (3) knee flexion angle (10°-30°-60°), (4) stance condition (forefoot vs. normal stance) and (5) load variation (no extra load vs. additional load equal to one-third of the body weight). The results are: (1) neuromuscular activity during SV was enhanced compared to SyV (P < 0.05); (2) a progressive increase in frequency caused a progressive increase in EMG activity (P < 0.05); (3) the EMG activity was highest for the knee extensors when the knee joint was 60° flexed (P < 0.05); (4) for the plantar flexors in the forefoot stance condition (P < 0.05); and (5) additional load caused an increase in neuromuscular activation (P < 0.05). In conclusion, large variations of the EMG activation could be observed across conditions. However, with an appropriate adjustment of specific WBV determinants, high EMG activations and therefore high activation intensities could be achieved in the selected muscles. The combination of high vibration frequencies with additional load on an SV platform led to highest EMG activities. Regarding the body position, a knee flexion of 60° and forefoot stance appear to be beneficial for the knee extensors and the plantar flexors, respectively.

  14. Structural diversity and biological significance of lipoteichoic acid in Gram-positive bacteria: focusing on beneficial probiotic lactic acid bacteria.

    PubMed

    Shiraishi, Tsukasa; Yokota, Shinichi; Fukiya, Satoru; Yokota, Atsushi

    2016-01-01

    Bacterial cell surface molecules are at the forefront of host-bacterium interactions. Teichoic acids are observed only in Gram-positive bacteria, and they are one of the main cell surface components. Teichoic acids play important physiological roles and contribute to the bacterial interaction with their host. In particular, lipoteichoic acid (LTA) anchored to the cell membrane has attracted attention as a host immunomodulator. Chemical and biological characteristics of LTA from various bacteria have been described. However, most of the information concerns pathogenic bacteria, and information on beneficial bacteria, including probiotic lactic acid bacteria, is insufficient. LTA is structurally diverse. Strain-level structural diversity of LTA is suggested to underpin its immunomodulatory activities. Thus, the structural information on LTA in probiotics, in particular strain-associated diversity, is important for understanding its beneficial roles associated with the modulation of immune response. Continued accumulation of structural information is necessary to elucidate the detailed physiological roles and significance of LTA. In this review article, we summarize the current state of knowledge on LTA structure, in particular the structure of LTA from lactic acid bacteria. We also describe the significance of structural diversity and biological roles of LTA.

  15. Structural diversity and biological significance of lipoteichoic acid in Gram-positive bacteria: focusing on beneficial probiotic lactic acid bacteria

    PubMed Central

    SHIRAISHI, Tsukasa; YOKOTA, Shinichi; FUKIYA, Satoru; YOKOTA, Atsushi

    2016-01-01

    Bacterial cell surface molecules are at the forefront of host-bacterium interactions. Teichoic acids are observed only in Gram-positive bacteria, and they are one of the main cell surface components. Teichoic acids play important physiological roles and contribute to the bacterial interaction with their host. In particular, lipoteichoic acid (LTA) anchored to the cell membrane has attracted attention as a host immunomodulator. Chemical and biological characteristics of LTA from various bacteria have been described. However, most of the information concerns pathogenic bacteria, and information on beneficial bacteria, including probiotic lactic acid bacteria, is insufficient. LTA is structurally diverse. Strain-level structural diversity of LTA is suggested to underpin its immunomodulatory activities. Thus, the structural information on LTA in probiotics, in particular strain-associated diversity, is important for understanding its beneficial roles associated with the modulation of immune response. Continued accumulation of structural information is necessary to elucidate the detailed physiological roles and significance of LTA. In this review article, we summarize the current state of knowledge on LTA structure, in particular the structure of LTA from lactic acid bacteria. We also describe the significance of structural diversity and biological roles of LTA. PMID:27867802

  16. Clinical Significance of Tissue Factor and CD13 Double-Positive Microparticles in Sirs Patients with Trauma and Severe Sepsis.

    PubMed

    Matsumoto, Hisatake; Yamakawa, Kazuma; Ogura, Hiroshi; Koh, Taichin; Matsumoto, Naoya; Shimazu, Takeshi

    2017-04-01

    Activated immune cells such as monocytes are key factors in systemic inflammatory response syndrome (SIRS) following trauma and sepsis. Activated monocytes induce almost all tissue factor (TF) expression contributing to inflammation and coagulation. TF and CD13 double-positive microparticles (TF/CD13MPs) are predominantly released from these activated monocytes. This study aimed to evaluate TF/CD13MPs and assess their usefulness as a biomarker of pathogenesis in early SIRS following trauma and sepsis. This prospective study comprising 24 trauma patients, 25 severe sepsis patients, and 23 healthy controls was conducted from November 2012 to February 2015. Blood samples were collected from patients within 24 h after injury and diagnosis of severe sepsis and from healthy controls. Numbers of TF/CD13MPs were measured by flow cytometry immediately thereafter. Injury Severity Score (ISS) and Acute Physiology and Chronic Health Evaluation (APACHE) II and Sequential Organ Failure Assessment (SOFA) scores were calculated at patient enrollment. APACHE II and SOFA scores and International Society of Thrombosis and Haemostasis (ISTH) overt disseminated intravascular coagulation (DIC) diagnostic criteria algorithm were calculated at the time of enrollment of severe sepsis patients. Numbers of TF/CD13MPs were significantly increased in both trauma and severe sepsis patients versus controls and correlated significantly with ISS and APACHE II score in trauma patients and with APACHE II and ISTH DIC scores in severe sepsis patients. Increased numbers of TF/CD13MPs correlated significantly with severities in the acute phase in trauma and severe sepsis patients, suggesting that TF/CD13MPs are important in the pathogenesis of early SIRS following trauma and sepsis.

  17. Patellar position in weight-bearing radiographs compared with non-weight-bearing: significance for the detection of osteoarthritis.

    PubMed

    Skou, Nikolaj; Egund, Niels

    2017-03-01

    Background Diagnosis and treatment of patellofemoral disorders including osteoarthritis are currently often based on imaging and clinical assessment with patients in the supine position. Purpose To evaluate differences in patellar position in the trochlear groove and to assess the detection of medial and lateral patellofemoral (PF) osteoarthritis (OA) on axial radiographs in supine and standing positions, respectively. Material and Methods Thirty-five women and 23 men (mean age, 56 years; age range, 18-87 years) referred for routine radiographic examinations of the knees were included. Axial radiographs of the PF joint in both supine non-weight-bearing and standing weight-bearing position in 30° knee flexion were obtained of 111 knees. Measurements performed on the radiographs: patellar tilt, patellar displacement, joint space width, and grade of OA according to Ahlbäck. Results From supine to standing position the patella moved medially and medial joint space width and lateral patellar tilt angle decreased ( P < 0.0001 for the three measured parameters). In the standing position, medial PF OA was observed in 19 knees compared to three knees in the supine position. Fourteen knees had lateral PF OA with almost unchanged grade of OA irrespective of position. Conclusion In weight-bearing positions, the patella is positioned medially in the trochlear groove compared to supine non-weight-bearing positions. Therefore, this study suggests that the common occurrence of medial PF OA can generally not be detected on axial radiographs in supine non-weight-bearing positions and confirms the importance of imaging the PF joint in standing weight-bearing positions.

  18. Photoaffinity labeling of pituitary GnRH receptors: significance of the position of photolabel on the ligand

    SciTech Connect

    Nikolics, K.; Szonyi, E.; Ramachandran, J.

    1988-03-08

    Photoreactive derivatives of GnRH and its analogues were prepared by incorporation of the 2-nitro-4(5)-azidophenylsulfenyl (2,4(5)-NAPS) group into amino acid residues at position 1, 3, 6, or 8 of the decapeptide sequence. The modification of Trp/sup 3/ by the 2,4-NAPS group led to a complete loss of the luteinizing hormone (LH) releasing as well as LH-release-inhibiting activity of the peptide. The (D-Lys(2,4-NAPS))/sup 6/ analog was a very potent agonist that, after covalent attachment by photoaffinity labeling, caused prolonged LH secretion at a submaximal rate. (Orn(2,4-NAPS))/sup 8/-GnRH, a full agonist with a relative potency of 7% of GnRH, after photoaffinity labeling caused prolonged maximal LH release from cultured pituitary cells. In contrast, (Orn(2,5-NAPS))/sup 8/-GnRH, although being equipotent with the 2,4-NAPS isomer in terms of LH releasing ability, was unable to cause prolonged LH release after photoaffinity labeling. Thus, (Orn(2,4-NAPS))/sup 8/GnRH is very effective photolabeling ligand of the functionally significant pituitary GnRH receptor. Based on this compound, a pituitary peptidase resistant derivative, D-Phe/sup 6/, (Orn(2,4-NAPS))/sup 8/-GnRH-(1-9)-ethylamide, was synthesized. This derivative showed high-affinity binding to pituitary membranes with a K/sub d/ comparable to those of other GnRH analogues. A radioiodinated form of this peptide was used for pituitary GnRH-receptor labeling. This derivative labeled 59- and 57-kDa proteins in rat and 58- and 56-kDa proteins in bovine pituitary membrane preparations, respectively. This peptide also labeled pituitary GnRH receptors in the solubilized state and therefore appears to be a suitable ligand for the isolation and further characterization of the receptor.

  19. Potentiation of photoinactivation of Gram-positive and Gram-negative bacteria mediated by six phenothiazinium dyes by addition of azide ion.

    PubMed

    Kasimova, Kamola R; Sadasivam, Magesh; Landi, Giacomo; Sarna, Tadeusz; Hamblin, Michael R

    2014-11-01

    Antimicrobial photodynamic inactivation (APDI) using phenothiazinium dyes is mediated by reactive oxygen species consisting of a combination of singlet oxygen (quenched by azide), hydroxyl radicals and other reactive oxygen species. We recently showed that addition of sodium azide paradoxically potentiated APDI of Gram-positive and Gram-negative bacteria using methylene blue as the photosensitizer, and this was due to electron transfer to the dye triplet state from azide anion, producing azidyl radical. Here we compare this effect using six different homologous phenothiazinium dyes: methylene blue, toluidine blue O, new methylene blue, dimethylmethylene blue, azure A, and azure B. We found both significant potentiation (up to 2 logs) and also significant inhibition (>3 logs) of killing by adding 10 mM azide depending on Gram classification, washing the dye from the cells, and dye structure. Killing of E. coli was potentiated with all 6 dyes after a wash, while S. aureus killing was only potentiated by MB and TBO with a wash and DMMB with no wash. More lipophilic dyes (higher log P value, such as DMMB) were more likely to show potentiation. We conclude that the Type I photochemical mechanism (potentiation with azide) likely depends on the microenvironment, i.e. higher binding of dye to bacteria. Bacterial dye-binding is thought to be higher with Gram-negative compared to Gram-positive bacteria, when unbound dye has been washed away, and with more lipophilic dyes.

  20. The Functional Effect of Teacher Positive and Neutral Affect on Task Performance of Students with Significant Disabilities

    ERIC Educational Resources Information Center

    Park, Sungho; Singer, George H. S.; Gibson, Mary

    2005-01-01

    The study uses an alternating treatment design to evaluate the functional effect of teacher's affect on students' task performance. Tradition in special education holds that teachers should engage students using positive and enthusiastic affect for task presentations and praise. To test this assumption, we compared two affective conditions. Three…

  1. Addition of Carboplatin to Neoadjuvant Therapy for Triple-negative and HER2-positive Early Breast Cancer

    ClinicalTrials.gov

    2016-02-12

    Tubular Breast Cancer Stage II; Mucinous Breast Cancer Stage II; Breast Cancer Female NOS; Invasive Ductal Breast Cancer; Tubular Breast Cancer Stage III; HER-2 Positive Breast Cancer; Inflammatory Breast Cancer Stage IV; Inflammatory Breast Cancer

  2. Molecular evolutionary dynamics of cytochrome b in strepsirrhine primates: the phylogenetic significance of third-position transversions.

    PubMed

    Yoder, A D; Vilgalys, R; Ruvolo, M

    1996-12-01

    DNA sequences of the complete cytochrome b gene are shown to contain robust phylogenetic signal for the strepsirrhine primates (i.e., lemurs and lorises). The phylogeny derived from these data conforms to other molecular studies of strepsirrhine relationships despite the fact that uncorrected nucleotide distances are high for nearly all intrastrepsirrhine comparisons, with most in the 15%-20% range. Cytochrome b sequences support the hypothesis that Malagasy lemuriforms and Afro-Asian lorisiforms each comprise clades that share a sister-group relationship. A study (Adkins and Honeycutt 1994) of the cytochrome c oxidase subunit II (COII) gene placed one Malagasy primate (Daubentonia) at the base of the strepsirrhine clade, thereby suggesting a diphyletic Lemuriformes. The reanalysis of COII third-position transversions, either alone or in combination with cytochrome b third-position transversions, however, yields a tree that is congruent with phylogenetic hypotheses derived from cytochrome b and other genetic data sets.

  3. [The significance of glucose positive coliform bacteria and potentially pathogenic bacteria as an indicator of epidemiological safety of tap water].

    PubMed

    Zhuravlev, P V; Aleshnya, V V; Panasovets, O P; Morozova, A A; Artemova, T Z; Talaeva, Yu G; Zagaynova, A V

    2013-01-01

    Due to intensive anthropogenic pollution of water environment generally accepted indicators of epidemic security of water bodies--common bacteria (CB) and thermotolerant coliform bacteria (TCB) do not always permit to obtain an objective characterization of bacterial contamination of tap water. From the point of view of authors the integral index--glucose positive coliform bacteria most adequately reflect the sanitary-hygienic and epidemiological situation of water bodies. In monitoring for bacterial quality of tap water it is advisable to determine glucose positive coliform bacteria, that will provide the relevance of estimation of the epidemiological safety of water use. According to the method developed by the authors the calculation of the index of population risk of acute intestinal infections (AHI) occurrence in dependence on the quality of tap water in Azov and Tsimlyansk towns.

  4. Percentage of Biopsy Cores Positive for Malignancy and Biochemical Failure Following Prostate Cancer Radiotherapy in 3,264 Men: Statistical Significance Without Predictive Performance

    SciTech Connect

    Williams, Scott G. Buyyounouski, Mark K.; Pickles, Tom; Kestin, Larry; Martinez, Alvaro; Hanlon, Alexandra L.; Duchesne, Gillian M.

    2008-03-15

    Purpose: To define and incorporate the impact of the percentage of positive biopsy cores (PPC) into a predictive model of prostate cancer radiotherapy biochemical outcome. Methods and Materials: The data of 3264 men with clinically localized prostate cancer treated with external beam radiotherapy at four institutions were retrospectively analyzed. Standard prognostic and treatment factors plus the number of biopsy cores collected and the number positive for malignancy by transrectal ultrasound-guided biopsy were available. The primary endpoint was biochemical failure (bF, Phoenix definition). Multivariate proportional hazards analyses were performed and expressed as a nomogram and the model's predictive ability assessed using the concordance index (c-index). Results: The cohort consisted of 21% low-, 51% intermediate-, and 28% high-risk cancer patients, and 30% had androgen deprivation with radiotherapy. The median PPC was 50% (interquartile range [IQR] 29-67%), and median follow-up was 51 months (IQR 29-71 months). Percentage of positive biopsy cores displayed an independent association with the risk of bF (p = 0.01), as did age, prostate-specific antigen value, Gleason score, clinical stage, androgen deprivation duration, and radiotherapy dose (p < 0.001 for all). Including PPC increased the c-index from 0.72 to 0.73 in the overall model. The influence of PPC varied significantly with radiotherapy dose and clinical stage (p = 0.02 for both interactions), with doses <66 Gy and palpable tumors showing the strongest relationship between PPC and bF. Intermediate-risk patients were poorly discriminated regardless of PPC inclusion (c-index 0.65 for both models). Conclusions: Outcome models incorporating PPC show only minor additional ability to predict biochemical failure beyond those containing standard prognostic factors.

  5. Tribological characteristics of bisphenol AF bis(diphenyl phosphate) as an antiwear additive in polyalkylene glycol and polyurea grease for significantly improved lubrication

    NASA Astrophysics Data System (ADS)

    Zhu, Lili; Wu, Xinhu; Zhao, Gaiqing; Wang, Xiaobo

    2016-02-01

    A new antiwear additive of Bisphenol AF bis(diphenyl phosphate) (BAFDP) was synthesized and characterized. The tribological behaviors of the additive for polyalkylene glycol (PAG) and polyurea grease (PG) application in steel/steel contacts were evaluated on an Optimol SRV-IV oscillating reciprocating friction and wear tester at elevated temperature. The results revealed that BAFDP could drastically reduce friction and wear of sliding pairs in both PAG and also in PG at 100 °C. The tribological properties of BAFDP are superior to the normally used zinc dialkyldithiophosphate-based additive package (ZDDP) in PAG and PG. Moreover, BAFDP as additive for PAG and PG displays relatively significant tribological properties in temperature-ramp tests by performing well at 50-300 °C, indicating the excellent high temperature friction reduction and anti-wear capacity of BAFDP. XPS results showed that boundary lubrication films composed of Fe(OH)O, Fe3O4, FePO4, FeF2, FeF3, compounds containing the Psbnd O bonds, nitrogen oxide, and so forth, were formed on the worn surface, which contributed to excellent friction reduction and antiwear performance.

  6. Significant improvement in the critical current density of MgB2 bulks in situ sintered at low temperature by excess Mg addition

    NASA Astrophysics Data System (ADS)

    Ma, Zongqing; Liu, Yongchang; Cai, Qi; Yu, Liming

    2014-01-01

    MgB2 bulks with excess Mg addition were rapidly synthesized by sintering at low temperature in present work. It is found that even after ball milling treatment of original powders, the reaction between Mg and B during subsequent low temperature sintering process was uncompleted within 5 h and there is still some residual Mg. On the other hand, the presence of residual Mg can make the sintering microstructure more homogeneous and dense, and also reduce lattice defects and mechanical strains. All the factors are contributed to the improvement of the grain connectivity in the samples with excess Mg addition sintered at low temperature compared to the reference MgB2 sample sintered at high temperature. Hence, Jc of these prepared samples is enhanced significantly across the whole measured fields. Especially, at 20 K, 2 T, the value of Jc in the 5 h-sintered MgB2 bulk with Mg addition is above 1 × 105 A cm-2. The technique developed in present work is an effective and low-cost way to further enhance Jc in the MgB2 superconductors without using expensive nanometer-size dopants.

  7. Significant positive correlation between sunshine and lactase nonpersistence in Europe may implicate both in similarly altering risks for some diseases.

    PubMed

    Szilagyi, Andrew; Leighton, Henry; Burstein, Barry; Shrier, Ian

    2011-01-01

    Decreasing latitude and increasing frequency of population lactase nonpersistence have been reported to diminish risks for several diseases, but the reason for overlap has not been explained. We evaluate, relationships between calculated national annual ultraviolet light B (UVB) exposure, latitude, and national lactose digestion frequencies. Annual UVB exposure and latitude were based on weighted averages from several cities in different countries. Lactase distribution status was based on published data that have been used previously to derive relations with diseases. We compare univariate regression analyses (r(2)(adj), slope) of percentage of lactase nonpersistence with UVB or latitude. We determine, differences between European and non-European sources by multiregression analysis of independent variables. Correlation between UVB and latitude is high (r(2) = 0.89), and between percentage of lactase nonpersistence and either latitude or UVB the correlation is moderately strong with r(2) = 0.51 and 0.46, respectively, with P ≤ 0.01 for both. A more detailed analysis shows that correlations between percentage of lactase nonpersistence and UVB are only significant in Europe, r(2) = 0.59, P < 0.001, whereas outside Europe: r(2) = 0.06, P = 0.16. These relationships raise hypothetical explanations to account for the observed overlap in similar risk modification by the 2 variables.

  8. Diagnosing Clostridium difficile-associated diarrhea using enzyme immunoassay: the clinical significance of toxin negativity in glutamate dehydrogenase-positive patients

    PubMed Central

    Yuhashi, Kazuhito; Yagihara, Yuka; Misawa, Yoshiki; Sato, Tomoaki; Saito, Ryoichi; Okugawa, Shu; Moriya, Kyoji

    2016-01-01

    Purpose The enzyme immunoassay (EIA) has lower sensitivity for Clostridium difficile toxins A and B than the polymerase chain reaction in the diagnosis of C. difficile-associated diarrhea (CDAD). Furthermore, toxin positivity with EIA performed on C. difficile isolates from stool cultures may be observed even in patients with EIA glutamate dehydrogenase (GDH)-positive and toxin-negative stool specimens. It is unclear whether such patients should be treated as having CDAD. Methods The present study retrospectively compared patient characteristics, treatment, and diarrhea duration among three groups of patients who underwent stool EIA testing for CDAD diagnosis: a toxin-positive stool group (positive stool group; n=39); a toxin-negative stool/toxin-positive isolate group (discrepant negative/positive group, n=14); and a dual toxin-negative stool and isolate group (dual negative group, n=15). All cases included were confirmed to be GDH positive on EIA test. Results Patients’ backgrounds and comorbidities were not significantly different among three groups. No difference was observed among the three groups with regard to antimicrobial drug use before diarrhea onset. Treatment was received by 82.1% of the positive stool group compared to 7.1% of the discrepant positive/negative group and 0% of the dual negative group, while mean diarrhea duration was 10.6 days compared to 7.9 days (P=0.6006) and 3.4 days (P=0.0312), respectively. Conclusion Even without treatment, patients with toxin-negative stool specimens had shorter diarrhea duration than those with toxin-positive stool specimens even with toxin-positive isolates. These findings may suggest a limited need for CDAD treatment for GDH-positive patients and toxin-negative stool specimens. PMID:27313472

  9. Occult hepatitis B virus co-infection in human immunodeficiency virus-positive patients: A review of prevalence, diagnosis and clinical significance

    PubMed Central

    Maldonado-Rodriguez, Angelica; Cevallos, Ana Maria; Rojas-Montes, Othon; Enriquez-Navarro, Karina; Alvarez-Muñoz, Ma Teresa; Lira, Rosalia

    2015-01-01

    The prevalence of human immunodeficiency virus (HIV) and hepatitis B virus (HBV) co-infection is high as they share similar mechanisms of transmission. The development and widespread use of highly sensitive tests for HBV diagnosis has demonstrated that a significant proportion of apparently healthy individuals with evidence of exposure to HBV continue to carry fully functional HBV DNA in their hepatocytes, a situation that predisposes them to the development of progressive liver disease and hepatocellular carcinoma. The presence of co-infections frequently influences the natural evolution of each of the participating infections present by either facilitating their virulence or competing for resources. Furthermore, the drugs used to treat these infections may also contribute to changes in the natural course of these infections, making the analysis of the impact of co-infection more difficult. The majority of studies has examined the impact of HIV on overt chronic hepatitis B, finding that co-infection carries an increased risk of progressive liver disease and the development of hepatocellular carcinoma. Although the effect of HIV on the natural history of occult hepatitis B infection (OBI) has not been fully assessed, all available data suggest a persisting risk of repeated flares of hepatitis and progressive liver disease. We describe studies regarding the diagnosis, prevalence and clinical significance of OBI in HIV-positive patients in this short review. Discrepancies in worldwide prevalence show the urgent need for the standardization of diagnostic criteria, as established by the Taormina statements. Ideally, standardized protocols for testing should be employed to enable the comparison of data from different groups. Additional studies are needed to define the differences in risk for OBI without HIV and in HIV-HBV co-infected patients with or without overt disease. PMID:25729480

  10. Occult hepatitis B virus co-infection in human immunodeficiency virus-positive patients: A review of prevalence, diagnosis and clinical significance.

    PubMed

    Maldonado-Rodriguez, Angelica; Cevallos, Ana Maria; Rojas-Montes, Othon; Enriquez-Navarro, Karina; Alvarez-Muñoz, Ma Teresa; Lira, Rosalia

    2015-02-27

    The prevalence of human immunodeficiency virus (HIV) and hepatitis B virus (HBV) co-infection is high as they share similar mechanisms of transmission. The development and widespread use of highly sensitive tests for HBV diagnosis has demonstrated that a significant proportion of apparently healthy individuals with evidence of exposure to HBV continue to carry fully functional HBV DNA in their hepatocytes, a situation that predisposes them to the development of progressive liver disease and hepatocellular carcinoma. The presence of co-infections frequently influences the natural evolution of each of the participating infections present by either facilitating their virulence or competing for resources. Furthermore, the drugs used to treat these infections may also contribute to changes in the natural course of these infections, making the analysis of the impact of co-infection more difficult. The majority of studies has examined the impact of HIV on overt chronic hepatitis B, finding that co-infection carries an increased risk of progressive liver disease and the development of hepatocellular carcinoma. Although the effect of HIV on the natural history of occult hepatitis B infection (OBI) has not been fully assessed, all available data suggest a persisting risk of repeated flares of hepatitis and progressive liver disease. We describe studies regarding the diagnosis, prevalence and clinical significance of OBI in HIV-positive patients in this short review. Discrepancies in worldwide prevalence show the urgent need for the standardization of diagnostic criteria, as established by the Taormina statements. Ideally, standardized protocols for testing should be employed to enable the comparison of data from different groups. Additional studies are needed to define the differences in risk for OBI without HIV and in HIV-HBV co-infected patients with or without overt disease.

  11. Significant thrombocytopenia associated with the addition of rituximab to a combination of fludarabine and cyclophosphamide in the treatment of relapsed follicular lymphoma.

    PubMed

    Leo, Eugen; Scheuer, Lars; Schmidt-Wolf, Ingo G H; Kerowgan, Mohammed; Schmitt, Christina; Leo, Albrecht; Baumbach, Tanja; Kraemer, Alwin; Mey, Ulrich; Benner, Axel; Parwaresch, Reza; Ho, Anthony D

    2004-10-01

    Fludarabine in combination with cyclophosphamide is an effective treatment for newly diagnosed as well as relapsed follicular lymphoma. The anti-CD20 antibody rituximab has been employed successfully for the same indications. No such data were available on a combined use of these agents. Therefore, we conducted a phase II study to evaluate the safety and efficacy of a combination of rituximab (375 mg/m2), fludarabine (4 x 25 mg/m2) and cyclophosphamide (1 x 750 mg/m2), for the treatment of relapsed follicular lymphoma. An unexpected, severe hematologic toxicity with significant, prolonged thrombocytopenias WHO grade III/IV in 6 (35%) of 17 patients treated in total occurred, leading to early termination of the trial. Cytologic and serologic analyses point toward a direct toxic effect. Older patients (mean age 64.7 vs. 56.5 yr) were significantly (P = 0.02) more likely to suffer from this toxicity, whereas no other clinical or hematologic parameter differed statistically between the patients suffering from thrombocytopenia and those who did not. The addition of rituximab to fludarabine/cyclophosphamide employed at doses given above in relapsed follicular lymphoma may have led to this increase in thrombocytopenias. Therefore, caution should be exercised when combining these drugs for the treatment of patients with relapsed follicular lymphoma, especially when treating older patients.

  12. Efficient detection of human circulating tumor cells without significant production of false-positive cells by a novel conditionally replicating adenovirus

    PubMed Central

    Sakurai, Fuminori; Narii, Nobuhiro; Tomita, Kyoko; Togo, Shinsaku; Takahashi, Kazuhisa; Machitani, Mitsuhiro; Tachibana, Masashi; Ouchi, Masaaki; Katagiri, Nobuyoshi; Urata, Yasuo; Fujiwara, Toshiyoshi; Mizuguchi, Hiroyuki

    2016-01-01

    Circulating tumor cells (CTCs) are promising biomarkers in several cancers, and thus methods and apparatuses for their detection and quantification in the blood have been actively pursued. A novel CTC detection system using a green fluorescence protein (GFP)–expressing conditionally replicating adenovirus (Ad) (rAd-GFP) was recently developed; however, there is concern about the production of false-positive cells (GFP-positive normal blood cells) when using rAd-GFP, particularly at high titers. In addition, CTCs lacking or expressing low levels of coxsackievirus–adenovirus receptor (CAR) cannot be detected by rAd-GFP, because rAd-GFP is constructed based on Ad serotype 5, which recognizes CAR. In order to suppress the production of false-positive cells, sequences perfectly complementary to blood cell–specific microRNA, miR-142-3p, were incorporated into the 3′-untranslated region of the E1B and GFP genes. In addition, the fiber protein was replaced with that of Ad serotype 35, which recognizes human CD46, creating rAdF35-142T-GFP. rAdF35-142T-GFP efficiently labeled not only CAR-positive tumor cells but also CAR-negative tumor cells with GFP. The numbers of false-positive cells were dramatically lower for rAdF35-142T-GFP than for rAd-GFP. CTCs in the blood of cancer patients were detected by rAdF35-142T-GFP with a large reduction in false-positive cells. PMID:26966699

  13. Addition of a third field significantly increases dose to the brachial plexus for patients undergoing tangential whole-breast therapy after lumpectomy

    SciTech Connect

    Stanic, Sinisa; Mathai, Mathew; Mayadev, Jyoti S.; Do, Ly V.; Purdy, James A.; Chen, Allen M.

    2012-07-01

    Our goal was to evaluate brachial plexus (BP) dose with and without the use of supraclavicular (SCL) irradiation in patients undergoing breast-conserving therapy with whole-breast radiation therapy (RT) after lumpectomy. Using the standardized Radiation Therapy Oncology Group (RTOG)-endorsed guidelines delineation, we contoured the BP for 10 postlumpectomy breast cancer patients. The radiation dose to the whole breast was 50.4 Gy using tangential fields in 1.8-Gy fractions, followed by a conedown to the operative bed using electrons (10 Gy). The prescription dose to the SCL field was 50.4 Gy, delivered to 3-cm depth. The mean BP volume was 14.5 {+-} 1.5 cm{sup 3}. With tangential fields alone, the median mean dose to the BP was 0.57 Gy, the median maximum dose was 1.93 Gy, and the irradiated volume of the BP receiving 40, 45, and 50 Gy was 0%. When the third (SCL field) was added, the dose to the BP was significantly increased (P = .01): the median mean dose to the BP was 40.60 Gy, and the median maximum dose was 52.22 Gy. With 3-field RT, the median irradiated volume of the BP receiving 40, 45, and 50 Gy was 83.5%, 68.5%, and 24.6%, respectively. The addition of the SCL field significantly increases dose to the BP. The possibility of increasing the risk of BP morbidity should be considered in the context of clinical decision making.

  14. An additional fluorenylmethoxycarbonyl (Fmoc) moiety in di-Fmoc-functionalized L-lysine induces pH-controlled ambidextrous gelation with significant advantages.

    PubMed

    Reddy, Samala Murali Mohan; Shanmugam, Ganesh; Duraipandy, Natarajan; Kiran, Manikantan Syamala; Mandal, Asit Baran

    2015-11-07

    In recent years, several fluorenylmethoxycarbonyl (Fmoc)-functionalized amino acids and peptides have been used to construct hydrogels, which find a wide range of applications. Although several hydrogels have been prepared from mono Fmoc-functionalized amino acids, herein, we demonstrate the importance of an additional Fmoc-moiety in the hydrogelation of double Fmoc-functionalized L-lysine [Fmoc(Nα)-L-lysine(NεFmoc)-OH, (Fmoc-K(Fmoc))] as a low molecular weight gelator (LMWG). Unlike other Fmoc-functionalized amino acid gelators, Fmoc-K(Fmoc) exhibits pH-controlled ambidextrous gelation (hydrogelation at different pH values as well as organogelation), which is significant among the gelators. Distinct fibrous morphologies were observed for Fmoc-K(Fmoc) hydrogels formed at different pH values, which are different from organogels in which Fmoc-K(Fmoc) showed bundles of long fibers. In both hydrogels and organogels, the self-assembly of Fmoc-K(Fmoc) was driven by aromatic π-π stacking and hydrogen bonding interactions, as evidenced from spectroscopic analyses. Characterization of Fmoc-K(Fmoc) gels using several biophysical methods indicates that Fmoc-K(Fmoc) has several advantages and significant importance as a LMWG. The advantages of Fmoc-K(Fmoc) include pH-controlled ambidextrous gelation, pH stimulus response, high thermal stability (∼100 °C) even at low minimum hydrogelation concentration (0.1 wt%), thixotropic property, high kinetic and mechanical stability, dye removal properties, cell viability to the selected cell type, and as a drug carrier. While single Fmoc-functionalized L-lysine amino acids failed to exhibit gelation under similar experimental conditions, the pH-controlled ambidextrous gelation of Fmoc-K(Fmoc) demonstrates the benefit of a second Fmoc moiety in inducing gelation in a LMWG. We thus strongly believe that the current findings provide a lead to construct or design various new synthetic Fmoc-based LMW organic gelators for several

  15. Prognostic Significance of Number of Positive Nodes: A Long-Term Study of One to Two Nodes Versus Three Nodes in Breast Cancer Patients

    SciTech Connect

    Tai, Patricia; Yu, Edward; Joseph, Kurian

    2010-05-01

    Purpose: Previous reports of breast cancer have generally analyzed patients with one to three positive lymph nodes as a single group, often leading to controversy regarding the practical clinical applicability. The present study separately analyzed the survival outcomes of Stage T1-T2 breast cancer patients according to whether one, two, or three axillary nodes were pathologically positive. Methods and Materials: The records of 5,996 patients were available for analysis from the population-based Saskatchewan provincial registry between 1981 and 1995. Because the reliability of the nodal assessment depends on the number of lymph nodes sampled, only those 755 patients with Stage T1-T2 disease and eight or more nodes examined were analyzed further for overall survival and cause-specific survival (CSS). Results: Patients with one and two positive nodes had nearly indistinguishable survival plots, but those with three positive nodes had a distinct trend toward worse survival. The overall survival rate of patients with one, two, and three nodes at 5, 10, and 15 years was 82.7%, 77.0%, and 79.0%, 64.8%, 60.9%, and 52.8%, and 48.8%, 48.0%, and 40.9%, respectively (p = .11). The corresponding CSS rates at 5, 10, and 15 years were 89.4%, 82.0%, and 81.3%, 78.87%, 72.9%, and 62.1%, and 72.7%. 69.0%, and 55.6% (p = .0004). The use of regional radiotherapy did not confer any apparent survival benefit in terms of either overall survival or CSS. Conclusion: Patients with one or two positive nodes had a similar CSS. However, those with three positive nodes fared worse, with a significantly reduced CSS compared with those with one or two involved nodes. Thus, the survival data among patients with one to three nodes positive reveals clearly relevant differences when analyzed separately.

  16. Clinical significance of coryneform Gram-positive rods from blood identified by MALDI-TOF mass spectrometry and their susceptibility profiles - a retrospective chart review.

    PubMed

    Mushtaq, Ammara; Chen, Derrick J; Strand, Gregory J; Dylla, Brenda L; Cole, Nicolynn C; Mandrekar, Jayawant; Patel, Robin

    2016-07-01

    With the advent of matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS), most Gram-positive rods (GPRs) are readily identified; however, their clinical relevance in blood cultures remains unclear. Herein, we assessed the clinical significance of GPRs isolated from blood and identified in the era of MALDI-TOF MS. A retrospective chart review of patients presenting to the Mayo Clinic, Rochester, MN, from January 1, 2013, to October 13, 2015, was performed. Any episode of a positive blood culture for a GPR was included. We assessed the number of bottles positive for a given isolate, time to positivity of blood cultures, patient age, medical history, interpretation of culture results by the healthcare team and whether infectious diseases consultation was obtained. We also evaluated the susceptibility profiles of a larger collection of GPRs tested in the clinical microbiology laboratory of the Mayo Clinic, Rochester, MN from January 1, 2013, to October 31, 2015. There were a total of 246 GPRs isolated from the blood of 181 patients during the study period. 56% (n = 101) were deemed contaminants by the healthcare team and were not treated; 33% (n = 59) were clinically determined to represent true bacteremia and were treated; and 8% (n = 14) were considered of uncertain significance, with patients prescribed treatment regardless. Patient characteristics associated with an isolate being treated on univariate analysis included younger age (P = 0.02), identification to the species level (P = 0.02), higher number of positive blood culture sets (P < 0.0001), lower time to positivity (P < 0.0001), immunosuppression (P = 0.03), and recommendation made by an infectious disease consultant (P = 0.0005). On multivariable analysis, infectious diseases consultation (P = 0.03), higher number of positive blood culture sets (P = 0.0005) and lower time to positivity (P = 0.03) were associated with an isolate being treated. 100, 83, 48 and 34% of GPRs

  17. Id-1 overexpression in invasive ductal carcinoma cells is significantly associated with intratumoral microvessel density in ER-negative/node-positive breast cancer.

    PubMed

    Jang, Ki-Seok; Han, Hong Xiu; Paik, Seung Sam; Brown, Powel H; Kong, Gu

    2006-12-08

    The aim of this study is to investigate the possible role of inhibitor of DNA binding (Id-1) overexpression in human breast cancer. We examined Id-1 expression by immunohistochemistry in 263 human breast cancers, 15 in situ lesions and 248 invasive cancers to investigate the relationship between its expression and various clinicopathological factors. Id-1 expression was significantly higher in invasive ductal carcinoma than in in situ ductal carcinoma or other invasive cancer subtypes (P=0.029 and 0.006, respectively). We also examined the association between Id-1 expression and tumor angiogenesis by measuring microvessel densities (MVD). Regarding the endothelial cells of microvessels showed negative or very weak Id-1 expression, Id-1 overexpression was found to be significantly related to MVD (P=0.014). Furthermore, Id-1 overexpression was found to be significantly associated with higher MVD in the ER-negative and node-involved subgroups of breast cancer (P=0.040 and 0.046, respectively). These data indicate that Id-1 overexpression is significantly associated with tumor angiogenesis, especially in the ER-negative and node-positive subtypes of invasive breast cancer. Thus, Id-1 presents a possible therapeutic antitumor target molecule in ER-negative and node-positive breast cancer.

  18. The prognostic significance of PELP1 expression in invasive breast cancer with emphasis on the ER-positive luminal-like subtype.

    PubMed

    Habashy, Hany Onsy; Powe, Desmond G; Rakha, Emad A; Ball, Graham; Macmillan, R Douglas; Green, Andrew R; Ellis, Ian O

    2010-04-01

    The transcription functions of oestrogen receptors (ER) are influenced by several coregulators such as PELP1 (proline, glutamate and leucine rich protein 1). The aim of the present study, which uses tissue microarrays and immunohistochemistry, is to explore the clinical and biological relevance of PELP1 protein expression in a large series of consecutive patients (1,162 patients) with invasive breast cancers with particular emphasis on its role in the ER-positive/luminal-like class of tumours. Our results showed that increased PELP1 expression is associated with tumours of larger size, higher histological grade, higher mitotic count, and with positive expression of basal cytokeratins (CK) (CK14; P = 0.018 and CK5/6; P = 0.029), P-cadherin (P = 0.002), p53 and MIB1 (P = 0.018). There was an inverse association between PELP1 expression and ER (P = 0.002), progesterone (PgR) (P = 0.004), androgen (AR) receptor (P < 0.001), and luminal CK (CK18; P = 0.027) expression. A significant association between PELP1 expression and shorter breast cancer specific survival (BCSS) (P = 0.002) and disease-free survival (DFI) (P = 0.006) was found. Multivariate Cox hazard analysis showed that PELP1 expression was an independent predictor of shorter BCSS (Hazard ratio (HR) = 1.349, P = 0.006) and shorter DFI (HR = 1.255, P = 0.011). In the ER-positive/luminal-like group (n = 768), PELP1 expression showed similar association with other clinicopathological variables and was an independent predictor of shorter DFI (HR = 1.256, P = 0.036). In conclusion, PELP1 protein expression is an independent prognostic predictor of shorter BCSS and DFI in breast cancer and its elevated expression is positively associated with markers of poor outcome. PELP1 appears to have a potential application in assessing the clinical outcome of patients with ER-positive breast cancer.

  19. Expression and clinical significance of estrogen-regulated long non-coding RNAs in estrogen receptor α-positive ovarian cancer progression.

    PubMed

    Qiu, Jun-Jun; Ye, Le-Chi; Ding, Jing-Xin; Feng, Wei-Wei; Jin, Hong-Yan; Zhang, Ying; Li, Qing; Hua, Ke-Qin

    2014-04-01

    Estrogen (E2) has long been implicated in epithelial ovarian cancer (EOC) progression. The effects of E2 on cancer progression can be mediated by numerous target genes, including coding RNAs and, more recently, non-coding RNAs (ncRNAs). Among the ncRNAs, long ncRNAs (lncRNAs) have emerged as new regulators in cancer progression; therefore, our aim was to determine whether the expression of any lncRNAs is regulated by E2 and, if so, whether a subset of these lncRNAs have some clinical significance in EOC progression. A microarray was performed to identify E2-regulated lncRNAs in E2 receptor (ER) α-positive EOC cells. Bioinformatics analyses of lncRNAs were conducted, focusing on gene ontology and pathway analyses. Quantitative real-time polymerase chain reactions were performed to confirm the expression of certain lncRNAs in ERα-positive EOC tissues. The correlation between certain lncRNA expression and clinicopathological factors as well as prognosis in ERα-positive EOC patients was then analyzed. We showed that 115 lncRNAs exhibited significant changes in E2-treated SKOV3 cells compared with untreated controls. Most of these lncRNAs were predicated to have potential to contribute to cancer progression. Notably, three candidates (TC0100223, TC0101686 and TC0101441) were aberrantly expressed in ERα-positive compared to ERα-negative EOC tissues, showing correlations with some malignant cancer phenotypes such as advanced FIGO stage and/or high histological grade. Furthermore, multivariate analysis indicated that TC0101441 was an independent prognostic factor for overall survival. Taken together, these results indicate for the first time that E2 can modulate lncRNA expression in ERα-positive EOC cells and that certain lncRNAs are correlated with advanced cancer progression and suggestive of a prognostic indicator in ERα-positive EOC patients. Knowledge of these E2-regulated lncRNAs could aid in the future understanding of the estrogenic effect on EOC progression

  20. Addition of an N-terminal epitope tag significantly increases the activity of plant fatty acid desaturases expressed in yeast cells

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Saccharomyces cerevisiae shows great potential for development of bioreactor systems geared towards the production of high-value lipids such as polyunsaturated omega-3 fatty acids, the yields of which are largely dependent on the activity of ectopically-expressed enzymes. Here we show that the addit...

  1. Hydrogen bonding mediated enantioselective organocatalysis in brine: significant rate acceleration and enhanced stereoselectivity in enantioselective Michael addition reactions of 1,3-dicarbonyls to β-nitroolefins.

    PubMed

    Bae, Han Yong; Some, Surajit; Oh, Joong Suk; Lee, Yong Seop; Song, Choong Eui

    2011-09-14

    Brine provides remarkable rate acceleration and a higher level of stereoselectivity over organic solvents, due to the hydrophobic hydration effect, in the enantioselective Michael addition reactions of 1,3-dicarbonyls to β-nitroolefins using chiral H-donors as organocatalysts.

  2. Amino acid addition to Vibrio cholerae LPS establishes a link between surface remodeling in gram-positive and gram-negative bacteria.

    PubMed

    Hankins, Jessica V; Madsen, James A; Giles, David K; Brodbelt, Jennifer S; Trent, M Stephen

    2012-05-29

    Historically, the O1 El Tor and classical biotypes of Vibrio cholerae have been differentiated by their resistance to the antimicrobial peptide polymyxin B. However, the molecular mechanisms associated with this phenotypic distinction have remained a mystery for 50 y. Both gram-negative and gram-positive bacteria modify their cell wall components with amine-containing substituents to reduce the net negative charge of the bacterial surface, thereby promoting cationic antimicrobial peptide resistance. In the present study, we demonstrate that V. cholerae modify the lipid A anchor of LPS with glycine and diglycine residues. This previously uncharacterized lipid A modification confers polymyxin resistance in V. cholerae El Tor, requiring three V. cholerae proteins: Vc1577 (AlmG), Vc1578 (AlmF), and Vc1579 (AlmE). Interestingly, the protein machinery required for glycine addition is reminiscent of the gram-positive system responsible for D-alanylation of teichoic acids. Such machinery was not thought to be used by gram-negative organisms. V. cholerae O1 El Tor mutants lacking genes involved in transferring glycine to LPS showed a 100-fold increase in sensitivity to polymyxin B. This work reveals a unique lipid A modification and demonstrates a charge-based remodeling strategy shared between gram-positive and gram-negative organisms.

  3. Addition of the p110α inhibitor BYL719 overcomes targeted therapy resistance in cells from Her2-positive-PTEN-loss breast cancer.

    PubMed

    Zhang, Chen; Xu, Bingfei; Liu, Pian

    2016-11-01

    Breast cancer is one of the leading causes of death for women worldwide. Among various subtypes of breast cancer, human epidermal growth factor receptor 2 (HER2)-positive and phosphatase and tensin homolog (PTEN) loss breast cancer is a cause of great concern in terms of its resistance to HER2-targeted therapies and its poor prognosis. Phosphatidylinositol 3-kinase (PI3K)/AKT hyperphosphorylation is considered one of key mechanisms leading to this resistance, thus combination therapy of PI3K inhibitors and HER2 antibodies is promising for overcoming this problem, and more specific regimens should be designed in this age of precision medicine. In this study, we established an HER2-positive and PTEN loss cell line and confirmed it by western blot analysis. This cell line and its orthotopic xenograft models were exposed to p110α-specific inhibitor BYL719, p110β-specific inhibitor AZD6482, or pan-PI3K inhibitor BKM120, respectively, and the results showed sensitivity to both BYL719 and BKM120 but not AZD6482, which indicated a p110α-reliance for HER2-positive-PTEN-loss breast cancer. Then, the addition of BYL719 to HER2 antibody greatly reduced tumor growth both in vitro and in vivo, accompanied by inhibited PI3K effector phosphorylation. Therefore, our findings suggest that the combination of p110α-selective inhibitor BYL719 with HER2 antibody could be a potential strategy for more personalized treatment of HER2-posistive-PTEN-loss breast cancer; and in addition, the optimal schedule of this combination therapy needs to be further explored.

  4. The significance of monoisotopic and carbon-13 isobars for the identification of a 19-component dodecapeptide library by positive ion electrospray Fourier transform ion cyclotron resonance mass spectrometry.

    PubMed

    Ramjit, H G; Kruppa, G H; Spier, J P; Ross, C W; Garsky, V M

    2000-01-01

    Harnessing the ultra high resolution capabilities of Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and positive ion electrospray, we have demonstrated the significance and utility of cumulative mass defect high resolution mass separation stable isotope distribution, exact mass measurement and elemental formula as a means of simultaneously identifying 19 components of the dodecapeptide library Ac-ANKISYQS[X]STE-NH(2). With an instrument resolution of 275 000 (average), isobaric multiplets attributed to monoisotopic and carbon-13 components of peptides: Ac approximately SLS approximately NH(2); Ac approximately SNS approximately NH(2); Ac approximately SOS approximately NH(2); Ac approximately SDS approximately NH(2); within the mass window of 1380-1385 Da, and Ac approximately SQS approximately NH(2); Ac approximately SKS approximately NH(2); Ac approximately SES approximately NH(2); Ac approximately SMS approximately NH(2), within the mass window 1395-1400 Da, were mass resolved, accurately mass measured and identified from the computed molecular formulas. This experimental procedure enabled the separation of monoisotopic and carbon-13 isobars yielding enhanced selectivity and specificity and serves to illustrate the significance of monoisotopic and carbon-13 isobars in final product analysis. Chromatographic separation (HPLC) was of limited utility except for monitoring the overall extent of reaction and apparent product distribution. Positive ion electrospray-FTICR-MS and fast atom bombardment (FAB) MS were used to assess final product quality and apparent component distribution.

  5. Clinical Significance of Folate Receptor-positive Circulating Tumor Cells Detected by Ligand-targeted Polymerase Chain Reaction in Lung Cancer

    PubMed Central

    Wang, Lin; Wu, Chuanyong; Qiao, Lihua; Yu, Wenjun; Guo, Qiaomei; Zhao, Mingna; Yang, Guohua; Zhao, Hang; Lou, Jiatao

    2017-01-01

    Background: As the heterogeneity of CTCs is becoming increasingly better understood, it is clear that identifying particular subtypes of CTCs would be more relevant. Methods: We detected folate receptor (FR)-positive circulating tumor cells (FR+-CTCs) by a novel ligand-targeted polymerase chain reaction (LT-PCR) detection technique. Results: In the none-dynamic study, FR+-CTC levels of patients with lung cancer were significantly higher than controls (patients with benign lung diseases and healthy controls). With a threshold of 8.7 CTC units, FR+-CTC showed a sensitivity of 77.7% and specificity of 89.5% in the diagnosis of lung cancer. When compared with established clinical biomarkers including carcinoembryonic antigen (CEA), cytokeratin 19 fragment (CYFRA21-1), and neuron-specific enolase (NSE), FR+-CTC showed the highest diagnostic efficiency. Notably, the combination of FR+-CTC, CEA, NSE, and CYFRA21-1 could significantly improve the diagnostic efficacy in differentiating patients with lung cancer from benign lung disease. In our dynamic surveillance study, the CTC levels of 62 non-small cell lung cancer (NSCLC) patients decreased significantly after tumor resection. Conclusion: We established a LT-PCR-based FR+-CTC detection platform for patients with lung cancer that exhibits high sensitivity and specificity. This platform would be clinical useful in lung cancer diagnosis and treatment response assessment. PMID:28123603

  6. HIV-positive nigerian adults harbor significantly higher serum lumefantrine levels than HIV-negative individuals seven days after treatment for Plasmodium falciparum infection.

    PubMed

    Chijioke-Nwauche, Ifeyinwa; van Wyk, Albert; Nwauche, Chijioke; Beshir, Khalid B; Kaur, Harparkash; Sutherland, Colin J

    2013-09-01

    Management of coinfection with malaria and HIV is a major challenge to public health in developing countries, and yet potential drug-drug interactions between antimalarial and antiviral regimens have not been adequately investigated in people with both infections. Each of the constituent components of artemether-lumefantrine, the first-line regimen for malaria treatment in Nigeria, and nevirapine, a major component of highly active antiretroviral therapy, are drugs metabolized by the cytochrome P450 3A4 isoenzyme system, which is also known to be induced by nevirapine. We examined potential interactions between lumefantrine and nevirapine in 68 HIV-positive adults, all of whom were diagnosed with asymptomatic Plasmodium falciparum infections by microscopy. Post hoc PCR analysis confirmed the presence of P. falciparum in only a minority of participants. Day 7 capillary blood levels of lumefantrine were significantly higher in HIV-positive participants than in 99 HIV-negative controls (P = 0.0011). Associations between day 7 levels of lumefantrine and risk of persistent parasitemia could not be evaluated due to inadequate power. Further investigations of the impact of nevirapine on in vivo malaria treatment outcomes in HIV-infected patients are thus needed.

  7. Recovery of genomic DNA from archived PCR product mixes for subsequent multiplex amplification and typing of additional loci: forensic significance for older unsolved criminal cases.

    PubMed

    Patchett, Kylie L; Cox, Ken J; Burns, Dennis M

    2002-07-01

    A method for genomic DNA recovery from different types of PCR product mixes suitable for multiplex amplification and typing using the Profiler Plus STR typing system has been investigated. The application of this method is of significance in cases where the original DNA samples have been exhausted due to repeated typing analyses in an effort to maximize their evidentiary value. Such cases typically involve samples analyzed using the available DNA typing systems of the time which gave a markedly lower power of discrimination, either alone or in combination, compared to that of modern multiplex STR typing systems. It was found that an effective method for recovering genomic DNA from HLA-DQA1 +PM and CTT triplex amplification mixes, suitable for reproducible achievement of the complete Profiler Plus profile, involved the use of Amicon Microcon-100 microconcentrators. Interestingly, this method was not required to achieve the complete nine STR profile using D1S80 amplification mixes.

  8. A Three-Lesson Teaching Unit Significantly Increases High School Students' Knowledge about Epilepsy and Positively Influences Their Attitude towards This Disease.

    PubMed

    Simon, Uwe K; Gesslbauer, Lisa; Fink, Andreas

    2016-01-01

    Epilepsy is not a regular topic in many countries' schools. Thus many people harbor misconceptions about people suffering from this disease. It was our aim to a) examine what grade ten students know and believe about epilepsy, and b) to develop and test a teaching unit to improve their knowledge and attitude. The test group comprised eight grade ten classes from six different Austrian high schools (54 girls and 51 boys aged 14-17), the control group (no intervention) five grade ten classes from the same schools (26 girls and 37 boys aged 14-17). The teaching unit consisted of three 45-min lessons using different methods and material. Changes in knowledge about and attitude towards epilepsy as a result of the intervention were psychometrically assessed in a pre-test intervention post-test design (along with a follow-up assessment two months after the intervention) by means of a questionnaire capturing different facets of epilepsy-related knowledge and attitude. Across all knowledge/attitude domains, students of the test group had a significantly improved knowledge about and a more positive attitude towards epilepsy and people suffering from it after the teaching unit. However, starting levels were different between the five knowledge/attitude domains tested. Medical background knowledge was lowest and consequently associated with the highest increase after the intervention. This study shows that epilepsy-related knowledge of many grade ten high school students is fragmentary and that some harbor beliefs and attitudes which require improvement. Our comprehensive but concise teaching unit significantly increased knowledge about epilepsy and positively influenced attitude towards individuals with epilepsy. Thus we recommend implementing this unit into regular school curricula.

  9. A Three-Lesson Teaching Unit Significantly Increases High School Students’ Knowledge about Epilepsy and Positively Influences Their Attitude towards This Disease

    PubMed Central

    Simon, Uwe K.; Gesslbauer, Lisa; Fink, Andreas

    2016-01-01

    Epilepsy is not a regular topic in many countries’ schools. Thus many people harbor misconceptions about people suffering from this disease. It was our aim to a) examine what grade ten students know and believe about epilepsy, and b) to develop and test a teaching unit to improve their knowledge and attitude. The test group comprised eight grade ten classes from six different Austrian high schools (54 girls and 51 boys aged 14–17), the control group (no intervention) five grade ten classes from the same schools (26 girls and 37 boys aged 14–17). The teaching unit consisted of three 45-min lessons using different methods and material. Changes in knowledge about and attitude towards epilepsy as a result of the intervention were psychometrically assessed in a pre-test intervention post-test design (along with a follow-up assessment two months after the intervention) by means of a questionnaire capturing different facets of epilepsy-related knowledge and attitude. Across all knowledge/attitude domains, students of the test group had a significantly improved knowledge about and a more positive attitude towards epilepsy and people suffering from it after the teaching unit. However, starting levels were different between the five knowledge/attitude domains tested. Medical background knowledge was lowest and consequently associated with the highest increase after the intervention. This study shows that epilepsy-related knowledge of many grade ten high school students is fragmentary and that some harbor beliefs and attitudes which require improvement. Our comprehensive but concise teaching unit significantly increased knowledge about epilepsy and positively influenced attitude towards individuals with epilepsy. Thus we recommend implementing this unit into regular school curricula. PMID:26919557

  10. Significance of a positive family history for coronary heart disease in patients with a zero coronary artery calcium score (from the Multi-Ethnic Study of Atherosclerosis).

    PubMed

    Cohen, Randy; Budoff, Matthew; McClelland, Robyn L; Sillau, Stefan; Burke, Gregory; Blaha, Michael; Szklo, Moyses; Uretsky, Seth; Rozanski, Alan; Shea, Steven

    2014-10-15

    Although a coronary artery calcium (CAC) score of 0 is associated with a very low 10-year risk for cardiac events, this risk is nonzero. Subjects with a family history of coronary heart disease (CHD) has been associated with more subclinical atherosclerosis than subjects without a family history of CHD. The purpose of this study was to assess the significance of a family history for CHD in subjects with a CAC score of 0. The Multi-Ethnic Study of Atherosclerosis cohort includes 6,814 participants free of clinical cardiovascular disease (CVD) at baseline. Positive family history was defined as reporting a parent, sibling, or child who had a heart attack. Time to incident CHD or CVD event was modeled using the multivariable Cox regression; 3,185 subjects were identified from the original Multi-Ethnic Study of Atherosclerosis cohort as having a baseline CAC score of 0 (mean age 58 years, 37% men). Over a median follow-up of 10 years, 101 participants (3.2%) had CVD events and 56 (1.8%) had CHD events. In age- and gender-adjusted analyses, a family history of CHD was associated with an ∼70% increase in CVD (hazard ratio 1.73, 95% confidence interval 1.17 to 2.56) and CHD (hazard ratio 1.72, 95% confidence interval 1.01 to 2.91) events. CVD events remained significant after further adjustment for ethnicity, risk factors, and baseline medication use. In conclusion, asymptomatic subjects with a 0 CAC score and a positive family history of CHD are at increased risk for CVD and CHD events compared with those without a family history of CHD, although absolute event rates remain low.

  11. The molecular symplesiomorphies shared by the stem groups of metazoan evolution: can sites as few as 1% have a significant impact on recognizing the phylogenetic position of myzostomida?

    PubMed

    Wang, Yanhui; Xie, Qiang

    2014-08-01

    Although it is clear that taxon sampling, alignments, gene sampling, tree reconstruction methods and the total length of the sequences used are critical to the reconstruction of evolutionary history, weakly supported or misleading nodes exist in phylogenetic studies with no obvious flaw in those aspects. The phylogenetic studies focusing on the basal part of bilaterian evolution are such a case. During the past decade, Myzostomida has appeared in the basal part of Bilateria in several phylogenetic studies of Metazoa. However, most researchers have entertained only two competing hypotheses about the position of Myzostomida-an affinity with Annelida and an affinity with Platyhelminthes. In this study, dozens of symplesiomorphies were discovered by means of ancestral state reconstruction in the complete 18S and 28S rDNAs shared by the stem groups of Metazoa. By contrastive analysis on the datasets with or without such symplesiomorphic sites, we discovered that Myzostomida and other basal groups are basal lineages of Bilateria due to the corresponding symplesiomorphies shared with earlier lineages. As such, symplesiomorphies account for approximately 1-2% of the whole dataset have an essential impact on phylogenetic inference, and this study reminds molecular systematists of the importance of carrying out ancestral state reconstruction at each site in sequence-based phylogenetic studies. In addition, reasons should be explored for the low support of the hypothesis that Myzostomida belongs to Annelida in the results of phylogenomic studies. Future phylogenetic studies concerning Myzostomida should include all of the basal lineages of Bilateria to avoid directly neglecting the stand-alone basal position of Myzostomida as a potential hypothesis.

  12. Addition of positively charged tripeptide to N-terminus of the Fos basic region leucine zipper domain: implications on DNA bending, affinity, and specificity.

    PubMed

    Mahmoudi, T; Sarkar, B

    1999-09-01

    GKH-Fos(139-211)/Jun(248-334) (GKH: glycine-lysine-histidine) is a modified Fos/Jun heterodimer designed to contain a metal binding motif in the form of a GKH tripeptide at the amino terminus of Fos bZIP domain dimerized with the Jun basic region leucine zipper (bZIP) domain. We examined the effect of the addition of positively charged GKH motif to the N-terminus of Fos(139-211) on the DNA binding characteristics of the Fos(139-211)/Jun(248-334) heterodimer. Binding studies indicate that while the nonspecific DNA binding affinity of the GKH modified heterodimer increases 4-fold, it specifically binds the activating protein-1 (AP-1) site 6-fold less tightly than the control unmodified counterpart. Furthermore, helical phasing analysis indicates that GKH-Fos(139-211)/Jun(248-334) and control Fos(139-211)/Jun(248-334) both bend the DNA at the AP-1 site toward the minor groove. However, due to the presence of the positively charged GKH motif on Fos, the degree of the induced bend by GKH- Fos(139-211)/Jun(248-334) is greater than that induced by the unmodified Fos/Jun heterodimer. Our results suggest that the unfavorable energetic cost of the increased DNA bending by GKH-Fos(139-211)/Jun(248-334) results in a decrease in both specificity and affinity of binding of the heterodimer to the AP-1 site. These findings may have important implications in protein design as well in our understanding of DNA bending and factors responsible for the functional specificity of different members of the bZIP family of transcription factors.

  13. The combination of compost addition and arbuscular mycorrhizal inoculation produced positive and synergistic effects on the phytomanagement of a semiarid mine tailing.

    PubMed

    Kohler, J; Caravaca, F; Azcón, R; Díaz, G; Roldán, A

    2015-05-01

    A field experiment was carried out to assess the effectiveness of combining mycorrhizal inoculation with a native AM fungus (Glomus sp.) and the addition of an urban organic waste compost (OWC) applied at two rates (0.5 and 2.0% (w:w)), with regard to promoting the establishment of Anthyllis cytisoides L. seedlings in a heavy metal polluted mine tailing, as well as stimulating soil microbial functions. The results showed that the combined use of the highest dose of OWC and AM inoculation significantly increased shoot biomass - by 64% - compared to the control value. However, the separate use of each treatment had no effect on the shoot biomass of this shrub species. At the 2% rate, OWC enhanced root colonisation by the introduced fungus as well as soil nutrient content and soil dehydrogenase and ß-glucosidase activities. The combined treatment increased the uptake of Zn and Mn in shoots, although only Zn reached excessive or potentially toxic levels. This study demonstrates that the combination of organic amendment and an AM fungus is a suitable tool for the phytomanagement of degraded mine tailings, although its effectiveness is dependent on the dose of the amendment.

  14. Additional cytogenetic abnormalities in adults with Philadelphia chromosome-positive acute lymphoblastic leukaemia: a study of the Cancer and Leukaemia Group B.

    PubMed

    Wetzler, Meir; Dodge, Richard K; Mrózek, Krzysztof; Stewart, Carleton C; Carroll, Andrew J; Tantravahi, Ramana; Vardiman, James W; Larson, Richard A; Bloomfield, Clara D

    2004-02-01

    We analysed the nature and prognostic significance of secondary cytogenetic changes in 111 newly diagnosed adults with acute lymphoblastic leukaemia (ALL) and t(9;22)(q34;q11.2) or its variants. Secondary aberrations were seen in 75 (68%) patients. They included, in order of descending frequency: +der(22)t(9;22), +21, abnormalities of 9p, high hyperdiploidy (>50 chromosomes), +8, -7, +X and abnormalities resulting in loss of material from 8p, gain of 8q, gain of 1q and loss of 7p. Eighty patients (72%) had > or =1 normal metaphase in their karyotype. There were four balanced and 12 unbalanced translocations previously unreported in ALL with t(9;22). The t(2;7)(p11;p13) and der(18)t(8;18)(q11.2;p11.2) were seen in two cases each, and have never before been reported in haematological malignancy. All but four patients were treated on front-line Cancer and Leukaemia Group B clinical protocols. The presence of -7 as a sole secondary abnormality was associated with a lower complete remission (CR) rate (P = 0.004), while the presence of > or =3 aberrations was associated with a higher CR rate (P = 0.009) and +der(22)t(9;22) with a higher cumulative incidence of relapse (P = 0.02). It will be of interest to see if newly diagnosed t(9;22)-positive adult ALL patients with these and other secondary aberrations respond differently to treatment regimens that include imatinib mesylate.

  15. Marker-Based Estimates Reveal Significant Non-additive Effects in Clonally Propagated Cassava (Manihot esculenta): Implications for the Prediction of Total Genetic Value and the Selection of Varieties.

    PubMed

    Wolfe, Marnin D; Kulakow, Peter; Rabbi, Ismail Y; Jannink, Jean-Luc

    2016-08-31

    In clonally propagated crops, non-additive genetic effects can be effectively exploited by the identification of superior genetic individuals as varieties. Cassava (Manihot esculenta Crantz) is a clonally propagated staple food crop that feeds hundreds of millions. We quantified the amount and nature of non-additive genetic variation for three key traits in a breeding population of cassava from sub-Saharan Africa using additive and non-additive genome-wide marker-based relationship matrices. We then assessed the accuracy of genomic prediction for total (additive plus non-additive) genetic value. We confirmed previous findings based on diallel populations, that non-additive genetic variation is significant for key cassava traits. Specifically, we found that dominance is particularly important for root yield and epistasis contributes strongly to variation in CMD resistance. Further, we showed that total genetic value predicted observed phenotypes more accurately than additive only models for root yield but not for dry matter content, which is mostly additive or for CMD resistance, which has high narrow-sense heritability. We address the implication of these results for cassava breeding and put our work in the context of previous results in cassava, and other plant and animal species.

  16. [Significance of the Bárány convection hypothesis for thermal nystagmus. Quantitative comparison of the intensity of thermal nystagmus in supine and prone position].

    PubMed

    Müller-Deile, J; Reker, U; Zell, E

    1986-03-01

    The hypothesis of Bárány explaining thermic nystagmus has been shaken. We must accept a non-convective triggering of nystagmus in extraterrestrial space. Under terrestrial conditions, however, the reversibility of the thermic nystagmus by changing from supine to prone position continues to support the convection hypothesis. We examined the nystagmus intensity in the supine and prone position with 22 healthy ears. The thermic stimulus was monitored via computer-controlled alternating irrigation system. The sequence of examinations was randomised and the evaluation of the nystagmus effected by automatic analysis. Our data allow to assess the importance of the non-convective nystagmus. With clinical test conditions about 85% of the maximal thermal reaction can be explained by the convection hypothesis of Bárány. However, interindividual variance is considerable, and one exceptional case with predominantly non-convectively released nystagmus is presented.

  17. The significance of abrupt transitions in Lineweaver-Burk plots with particular reference to glutamate dehydrogenase. Negative and positive co-operativity in catalytic rate constants.

    PubMed

    Engel, P C; Ferdinand, W

    1973-01-01

    1. Lineweaver-Burk plots for glutamate dehydrogenase, glucose 6-phosphate dehydrogenase and several other enzymes show one or more abrupt transitions between apparently linear sections. These transitions correspond to abrupt increases in the apparent K(m) and V(max.) with increasing concentration of the varied substrate. 2. The generalized reciprocal initial-rate equation for a multi-site enzyme requires several restrictions to be put on it in order to generate such plots. These mathematical conditions are explored. 3. It is shown that the effective omission of a term in the denominator of the reciprocal initial-rate equation represents a minimal requirement for generation of abrupt transitions. This corresponds in physical terms to negative co-operativity followed by positive co-operativity affecting the catalytic rate constant for the reaction. 4. Previous models for glutamate dehydrogenase cannot adequately account for the results. On the other hand, the model based on both negative and positive co-operativity gives a good fit to the experimental points. 5. The conclusions are discussed in relation to current knowledge of the structure and mechanism of glutamate dehydrogenase.

  18. First-line therapy in HER2 positive metastatic breast cancer: is the mosaic fully completed or are we missing additional pieces?

    PubMed

    Fabi, Alessandra; Malaguti, Paola; Vari, Sabrina; Cognetti, Francesco

    2016-06-30

    The discovery of human epidermal growth factor receptor 2 (HER2) and its role in the biology of breast cancer and the subsequent development of HER2-targeted therapies, have dramatically improved clinical outcomes for women with early-stage and advanced HER2-positive breast cancer (BC).HER-2 targeted therapies represent a major step forward in achieving the goal of delivering individualized targeted therapy for BC, and trastuzumab was the first anti-HER-2 strategy to be approved for treatment of HER-2 positive BC. This review discusses the treatment of metastatic HER2-positive BC and describes efficacy and safety of novel anti-HER2 target therapies in first-line metastatic settings and the future challenges include refining such treatments, reducing toxicity and simultaneously developing innovative therapies. Furthermore, combinations of trastuzumab and drugs targeting the downstream pathway are described.In the next future will be possible to use an ample armamentarium of combination therapies directed against HER2 and key signaling components integrated in the HER network. This approach will allow clinicians to tailor the management of the individual patient on the basis of tumor- specific biomarker profiles.There is an urgent need for prospective biomarker-driven trials to identify patients for whom targeting is cost-effective.

  19. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial

    PubMed Central

    Rule, Simon; Smith, Paul; Johnson, Peter W.M.; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F.; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-01-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network. PMID:26611473

  20. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy results in a significant improvement in overall survival in patients with newly diagnosed mantle cell lymphoma: results of a randomized UK National Cancer Research Institute trial.

    PubMed

    Rule, Simon; Smith, Paul; Johnson, Peter W M; Bolam, Simon; Follows, George; Gambell, Joanne; Hillmen, Peter; Jack, Andrew; Johnson, Stephen; Kirkwood, Amy A; Kruger, Anton; Pocock, Christopher; Seymour, John F; Toncheva, Milena; Walewski, Jan; Linch, David

    2016-02-01

    Mantle cell lymphoma is an incurable and generally aggressive lymphoma that is more common in elderly patients. Whilst a number of different chemotherapeutic regimens are active in this disease, there is no established gold standard therapy. Rituximab has been used widely to good effect in B-cell malignancies but there is no evidence that it improves outcomes when added to chemotherapy in this disease. We performed a randomized, open-label, multicenter study looking at the addition of rituximab to the standard chemotherapy regimen of fludarabine and cyclophosphamide in patients with newly diagnosed mantle cell lymphoma. A total of 370 patients were randomized. With a median follow up of six years, rituximab improved the median progression-free survival from 14.9 to 29.8 months (P<0.001) and overall survival from 37.0 to 44.5 months (P=0.005). This equates to absolute differences of 9.0% and 22.1% for overall and progression-free survival, respectively, at two years. Overall response rates were similar, but complete response rates were significantly higher in the rituximab arm: 52.7% vs. 39.9% (P=0.014). There was no clinically significant additional toxicity observed with the addition of rituximab. Overall, approximately 18% of patients died of non-lymphomatous causes, most commonly infections. The addition of rituximab to fludarabine and cyclophosphamide chemotherapy significantly improves outcomes in patients with mantle cell lymphoma. However, these regimens have significant late toxicity and should be used with caution. This trial has been registered (ISRCTN81133184 and clinicaltrials.gov:00641095) and is supported by the UK National Cancer Research Network.

  1. Response to Letter Regarding the Louisiana Department of Environmental Protection's Position on the PSD Significant Emission Level for ODS at Existing Major Sources

    EPA Pesticide Factsheets

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  2. Significance of postgrowth processing of ZnO nanostructures on antibacterial activity against gram-positive and gram-negative bacteria

    PubMed Central

    Mehmood, Shahid; Rehman, Malik A; Ismail, Hammad; Mirza, Bushra; Bhatti, Arshad S

    2015-01-01

    In this work, we highlighted the effect of surface modifications of one-dimensional (1D) ZnO nanostructures (NSs) grown by the vapor–solid mechanism on their antibacterial activity. Two sets of ZnO NSs were modified separately – one set was modified by annealing in an Ar environment, and the second set was modified in O2 plasma. Annealing in Ar below 800°C resulted in a compressed lattice, which was due to removal of Zn interstitials and increased O vacancies. Annealing above 1,000°C caused the formation of a new prominent phase, Zn2SiO4. Plasma oxidation of the ZnO NSs caused an expansion in the lattice due to the removal of O vacancies and incorporation of excess O. Photoluminescence (PL) spectroscopy was employed for the quantification of defects associated with Zn and O in the as-grown and processed ZnO NS. Two distinct bands were observed, one in the ultraviolet (UV) region, due to interband transitions, and other in the visible region, due to defects associated with Zn and O. PL confirmed the surface modification of ZnO NS, as substantial decrease in intensities of visible band was observed. Antibacterial activity of the modified ZnO NSs demonstrated that the surface modifications by Ar annealing limited the antibacterial characteristics of ZnO NS against Staphylococcus aureus. However, ZnO NSs annealed at 1,000°C or higher showed a remarkable antibacterial activity against Escherichia coli. O2 plasma–treated NS showed appreciable antibacterial activity against both E. coli and S. aureus. The minimum inhibition concentration was determined to be 0.5 mg/mL and 1 mg/mL for Ar-annealed and plasma-oxidized ZnO NS, respectively. It was thus proved that the O content at the surface of the ZnO NS was crucial to tune the antibacterial activity against both selected gram-negative (E. coli) and gram-positive (S. aureus) bacterial species. PMID:26213466

  3. Effect of oxyfluorinated multi-walled carbon nanotube additives on positive temperature coefficient/negative temperature coefficient behavior in high-density polyethylene polymeric switches

    SciTech Connect

    Bai, Byong Chol; Kang, Seok Chang; Im, Ji Sun; Lee, Se Hyun; Lee, Young-Seak

    2011-09-15

    Graphical abstract: The electrical properties of MWCNT-filled HDPE polymeric switches and their effect on oxyfluorination. Highlights: {yields} Oxyfluorinated MWCNTs were used to reduce the PTC/NTC phenomenon in MWCNT-filled HDPE polymeric switches. {yields} Electron mobility is difficult in MWCNT particles when the number of oxygen functional groups (C-O, C=O) increases by oxyfluorination. {yields} A mechanism of improved electrical properties of oxyfluorinated MWCNT-filled HDPE polymeric switches was suggested. -- Abstract: Multi-walled carbon nanotubes (MWCNTs) were embedded into high-density polyethylene (HDPE) to improve the electrical properties of HDPE polymeric switches. The MWCNT surfaces were modified by oxyfluorination to improve their positive temperature coefficient (PTC) and negative temperature coefficient (NTC) behaviors in HDPE polymeric switches. HDPE polymeric switches exhibit poor electron mobility between MWCNT particles when the number of oxygen functional groups is increased by oxyfluorination. Thus, the PTC intensity of HDPE polymeric switches was increased by the destruction of the electrical conductivity network. The oxyfluorination of MWCNTs also leads to weak NTC behavior in the MWCNT-filled HDPE polymeric switches. This result is attributed to the reduction of the mutual attraction between the MWCNT particles at the melting temperature of HDPE, which results from a decrease in the surface free energy of the C-F bond in MWCNT particles.

  4. Sunflower Oil but Not Fish Oil Resembles Positive Effects of Virgin Olive Oil on Aged Pancreas after Life-Long Coenzyme Q Addition

    PubMed Central

    González-Alonso, Adrián; Ramírez-Tortosa, César L.; Varela-López, Alfonso; Roche, Enrique; Arribas, María I.; Ramírez-Tortosa, M. Carmen; Giampieri, Francesca; Ochoa, Julio J.; Quiles, José L.

    2015-01-01

    An adequate pancreatic structure is necessary for optimal organ function. Structural changes are critical in the development of age-related pancreatic disorders. In this context, it has been reported that different pancreatic compartments from rats were affected according to the fat composition consumed. Since there is a close relationship between mitochondria, oxidative stress and aging, an experimental approach has been developed to gain more insight into this process in the pancreas. A low dosage of coenzyme Q was administered life-long in rats in order to try to prevent pancreatic aging-related alterations associated to some dietary fat sources. According to that, three groups of rats were fed normocaloric diets containing Coenzyme Q (CoQ) for two years, where virgin olive, sunflower, or fish oil was included as unique fat source. Pancreatic samples for microscopy and blood samples were collected at the moment of euthanasia. The main finding is that CoQ supplementation gives different results according to fat used in diet. When sunflower oil was the main fat in the diet, CoQ supplementation seems to improve endocrine pancreas structure and in particular β-cell mass resembling positive effects of virgin olive oil. Conversely, CoQ intake does not seem to improve the structural alterations of exocrine compartment previously observed in fish oil fed rats. Therefore CoQ may improve pancreatic alterations associated to the chronic intake of some dietary fat sources. PMID:26426013

  5. Sunflower Oil but Not Fish Oil Resembles Positive Effects of Virgin Olive Oil on Aged Pancreas after Life-Long Coenzyme Q Addition.

    PubMed

    González-Alonso, Adrián; Ramírez-Tortosa, César L; Varela-López, Alfonso; Roche, Enrique; Arribas, María I; Ramírez-Tortosa, M Carmen; Giampieri, Francesca; Ochoa, Julio J; Quiles, José L

    2015-09-29

    An adequate pancreatic structure is necessary for optimal organ function. Structural changes are critical in the development of age-related pancreatic disorders. In this context, it has been reported that different pancreatic compartments from rats were affected according to the fat composition consumed. Since there is a close relationship between mitochondria, oxidative stress and aging, an experimental approach has been developed to gain more insight into this process in the pancreas. A low dosage of coenzyme Q was administered life-long in rats in order to try to prevent pancreatic aging-related alterations associated to some dietary fat sources. According to that, three groups of rats were fed normocaloric diets containing Coenzyme Q (CoQ) for two years, where virgin olive, sunflower, or fish oil was included as unique fat source. Pancreatic samples for microscopy and blood samples were collected at the moment of euthanasia. The main finding is that CoQ supplementation gives different results according to fat used in diet. When sunflower oil was the main fat in the diet, CoQ supplementation seems to improve endocrine pancreas structure and in particular β-cell mass resembling positive effects of virgin olive oil. Conversely, CoQ intake does not seem to improve the structural alterations of exocrine compartment previously observed in fish oil fed rats. Therefore CoQ may improve pancreatic alterations associated to the chronic intake of some dietary fat sources.

  6. CD90-positive cells, an additional cell population, produce laminin {alpha}2 upon transplantation to dy{sup 3k}/dy{sup 3k} mice

    SciTech Connect

    Fukada, So-ichiro Yamamoto, Yukiko; Segawa, Masashi; Sakamoto, Kenta; Nakajima, Mari; Sato, Masaki; Morikawa, Daisuke; Uezumi, Akiyoshi; Miyagoe-Suzuki, Yuko; Takeda, Shin'ichi; Tsujikawa, Kazutake; Yamamoto, Hiroshi

    2008-01-01

    Laminin {alpha}2 is a component of skeletal and cardiac muscle basal lamina. A defect of the laminin {alpha}2 chain leads to severe congenital muscular dystrophy (MDC1A) in humans and dy/dy mice. Myogenic cells including myoblasts, myotubes, and myofibers in skeletal muscle are a possible source of the laminin {alpha}2 chain, and myogenic cells are thus proposed as a cell source for congenital muscular dystrophy therapy. However, we observed production of laminin {alpha}2 in non-myogenic cells of normal mice, and we could enrich these laminin {alpha}2-producing cells in CD90{sup +} cell fractions. Intriguingly, the number of CD90{sup +} cells increased dramatically during skeletal muscle regeneration in mice. This fraction did not include myogenic cells but exhibited a fibroblast-like phenotype. Moreover, these cells were resident in skeletal muscle, not derived from bone marrow. Finally, the production of laminin {alpha}2 in CD90{sup +} cells was not dependent on fusion with myogenic cells. Thus, CD90{sup +} cells are a newly identified additional cell fraction that increased during skeletal muscle regeneration in vivo and could be another cell source for therapy for lama2-deficient muscular dystrophy.

  7. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  8. Food additives

    MedlinePlus

    ... or natural. Natural food additives include: Herbs or spices to add flavor to foods Vinegar for pickling ... Certain colors improve the appearance of foods. Many spices, as well as natural and man-made flavors, ...

  9. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  10. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  11. Positive psychotherapy.

    PubMed

    Seligman, Martin E P; Rashid, Tayyab; Parks, Acacia C

    2006-11-01

    Positive psychotherapy (PPT) contrasts with standard interventions for depression by increasing positive emotion, engagement, and meaning rather than directly targeting depressive symptoms. The authors have tested the effects of these interventions in a variety of settings. In informal student and clinical settings, people not uncommonly reported them to be "life-changing." Delivered on the Web, positive psychology exercises relieved depressive symptoms for at least 6 months compared with placebo interventions, the effects of which lasted less than a week. In severe depression, the effects of these Web exercises were particularly striking. This address reports two preliminary studies: In the first, PPT delivered to groups significantly decreased levels of mild-to-moderate depression through 1-year follow-up. In the second, PPT delivered to individuals produced higher remission rates than did treatment as usual and treatment as usual plus medication among outpatients with major depressive disorder. Together, these studies suggest that treatments for depression may usefully be supplemented by exercises that explicitly increase positive emotion, engagement, and meaning. ((c) 2006 APA, all rights reserved).

  12. Significance of GATA-3 expression in outcomes of patients with breast cancer who received systemic chemotherapy and/or hormonal therapy and clinicopathologic features of GATA-3-positive tumors.

    PubMed

    Gulbahce, H Evin; Sweeney, Carol; Surowiecka, Maria; Knapp, Dennis; Varghese, Linda; Blair, Cindy K

    2013-11-01

    GATA-3 and estrogen receptor (ER) are involved in a positive cross-regulatory loop and are frequently coexpressed in breast cancers. GATA-3 expression was shown to be an independent predictor of overall and disease-free survival in some studies, whereas others showed no difference. However, the studies used different cutoff values for determining GATA-3 positivity and analyzed outcomes in patients who received systemic therapy together with those who did not. We investigated GATA-3 expression and correlated clinicopathologic findings and outcomes in 516 women who received systemic chemotherapy and/or hormonal therapy. Nuclear staining of 1% or greater was considered positive for GATA-3, ER and progesterone receptor (PR). Of 516 cases, 436 (84.5%) were GATA-3+. GATA-3+ tumors were more likely to be grade 1 or 2, ER+, PR+, non-triple-negative phenotypes (all P < .0001), and higher stage (P = .01). ER-/GATA-3+ tumors, compared with ER-/GATA-3- tumors, had worse breast cancer survival (BCS) (P = .02) and a trend for worse overall survival (OS) (P = .05) in univariate analysis. However, there was no difference in OS and BCS between patients who received chemotherapy and/or hormonal therapy among GATA-3-positive and GATA-3-negative groups. GATA-3+ tumors are correlated with lower grade, ER+, PR+, and non-triple-negative phenotypes. Although there was no difference in OS and BCS between GATA-3-positive and GATA-3-negative groups, there was an adverse effect of GATA-3 expression in the ER-negative subgroup of patients who received systemic therapy.

  13. Nitrogen as a friendly addition to steel

    SciTech Connect

    Rawers, J.C.

    2006-01-01

    Interstitial alloying with nitrogen or carbon is a common means of enhancing properties of iron-based alloys. Interstitial nitrogen addition to fcc-phase Fe-Cr-Mn/Ni alloys results in improved mechanical properties, whereas addition of carbon can result in the formation of unwanted carbides. Carbon addition to low alloy, bcc-phase iron alloys significantly improves strength through the formation of carbides, whereas addition of nitrogen in bcc-phase iron alloys can result in porous casting and reduced mechanical properties. This study will show that alloying iron-based alloys with both nitrogen and carbon can produce positive results. Nitrogen addition to Fe-C and Fe-Cr-C alloys, and both nitrogen and nitrogen-carbon additions to Fe-Cr-Mn/Ni alloys altered the microstructure, improved mechanical properties, increased hardness, and reduced wear by stabilizing the fcc-phase and altering (possibly eliminating) precipitate formation.

  14. The number and distances of positive charges of polyamine side chains in a series of perylene diimides significantly influence their ability to induce G-quadruplex structures and inhibit human telomerase.

    PubMed

    Franceschin, Marco; Lombardo, Caterina Maria; Pascucci, Emanuela; D'Ambrosio, Danilo; Micheli, Emanuela; Bianco, Armandodoriano; Ortaggi, Giancarlo; Savino, Maria

    2008-03-01

    We have synthesized eight polyamine perylene diimides to conjugate the efficiency of perylene derivatives in stabilizing G-quadruplex structures and the polyamines' biological activity, due to specific interactions with different DNA domains. Our study was carried out by investigating the ability of these derivatives to induce inter- and intramolecular G-quadruplex structures by polyacrylamide gel electrophoresis (PAGE) and to inhibit telomerase in a modified TRAP assay. The two properties appear to be satisfactorily correlated and they show that the number and distances of positive charges in the side chains dramatically influence both these features. Although our previous studies on perylene derivatives with mono-positively charged side chains indicated that self assembly in aqueous solution leads to a major efficiency, the result observed with the spermine derivative suggests that a too strong aggregation is unfavourable, because it determines a lower solubility of the compounds.

  15. Detecting Positioning Errors and Estimating Correct Positions by Moving Window

    PubMed Central

    Song, Ha Yoon; Lee, Jun Seok

    2015-01-01

    In recent times, improvements in smart mobile devices have led to new functionalities related to their embedded positioning abilities. Many related applications that use positioning data have been introduced and are widely being used. However, the positioning data acquired by such devices are prone to erroneous values caused by environmental factors. In this research, a detection algorithm is implemented to detect erroneous data over a continuous positioning data set with several options. Our algorithm is based on a moving window for speed values derived by consecutive positioning data. Both the moving average of the speed and standard deviation in a moving window compose a moving significant interval at a given time, which is utilized to detect erroneous positioning data along with other parameters by checking the newly obtained speed value. In order to fulfill the designated operation, we need to examine the physical parameters and also determine the parameters for the moving windows. Along with the detection of erroneous speed data, estimations of correct positioning are presented. The proposed algorithm first estimates the speed, and then the correct positions. In addition, it removes the effect of errors on the moving window statistics in order to maintain accuracy. Experimental verifications based on our algorithm are presented in various ways. We hope that our approach can help other researchers with regard to positioning applications and human mobility research. PMID:26624282

  16. Detecting Positioning Errors and Estimating Correct Positions by Moving Window.

    PubMed

    Song, Ha Yoon; Lee, Jun Seok

    2015-01-01

    In recent times, improvements in smart mobile devices have led to new functionalities related to their embedded positioning abilities. Many related applications that use positioning data have been introduced and are widely being used. However, the positioning data acquired by such devices are prone to erroneous values caused by environmental factors. In this research, a detection algorithm is implemented to detect erroneous data over a continuous positioning data set with several options. Our algorithm is based on a moving window for speed values derived by consecutive positioning data. Both the moving average of the speed and standard deviation in a moving window compose a moving significant interval at a given time, which is utilized to detect erroneous positioning data along with other parameters by checking the newly obtained speed value. In order to fulfill the designated operation, we need to examine the physical parameters and also determine the parameters for the moving windows. Along with the detection of erroneous speed data, estimations of correct positioning are presented. The proposed algorithm first estimates the speed, and then the correct positions. In addition, it removes the effect of errors on the moving window statistics in order to maintain accuracy. Experimental verifications based on our algorithm are presented in various ways. We hope that our approach can help other researchers with regard to positioning applications and human mobility research.

  17. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  18. Positive battery plate

    NASA Technical Reports Server (NTRS)

    Rowlette, John R. (Inventor)

    1985-01-01

    The power characteristics of a lead acid battery are improved by incorporating a dispersion of 1 to 10% by weight of a thermodynamically stable conductivity additive, such as conductive tin oxide coated glass fibers (34) of filamentary glass wool (42) in the positive active layer (32) carried on the grid (30) of the positive plate (16). Positive plate potential must be kept high enough to prevent reduction of the tin oxide to tin by utilizing an oversized, precharged positive paste.

  19. Nursing Positions

    MedlinePlus

    ... breast with your other hand. The Clutch or Football Hold This is also a good position for ... same time may also choose this position. The football hold allows babies to take milk more easily — ...

  20. Positive Psychology

    ERIC Educational Resources Information Center

    Peterson, Christopher

    2009-01-01

    Positive psychology is a deliberate correction to the focus of psychology on problems. Positive psychology does not deny the difficulties that people may experience but does suggest that sole attention to disorder leads to an incomplete view of the human condition. Positive psychologists concern themselves with four major topics: (1) positive…

  1. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  2. Positive Psychotherapy

    ERIC Educational Resources Information Center

    Seligman, Martin E. P.; Rashid, Tayyab; Parks, Acacia C.

    2006-01-01

    Positive psychotherapy (PPT) contrasts with standard interventions for depression by increasing positive emotion, engagement, and meaning rather than directly targeting depressive symptoms. The authors have tested the effects of these interventions in a variety of settings. In informal student and clinical settings, people not uncommonly reported…

  3. Nursing Positions

    MedlinePlus

    ... and actually needs to feed. Getting Comfortable With Breastfeeding Nursing can be one of the most challenging ... a mother. As you become more used to breastfeeding your baby, you can try different positions or ...

  4. Positive Proof.

    ERIC Educational Resources Information Center

    Auty, Geoffrey

    1988-01-01

    Presents experiments which show that in electrostatics there are logical reasons for describing charged materials as positive or negative. Indicates that static and current electricity are not separate areas of physics. Diagrams of experiments and circuits are included. (RT)

  5. Significant Tsunami Events

    NASA Astrophysics Data System (ADS)

    Dunbar, P. K.; Furtney, M.; McLean, S. J.; Sweeney, A. D.

    2014-12-01

    Tsunamis have inflicted death and destruction on the coastlines of the world throughout history. The occurrence of tsunamis and the resulting effects have been collected and studied as far back as the second millennium B.C. The knowledge gained from cataloging and examining these events has led to significant changes in our understanding of tsunamis, tsunami sources, and methods to mitigate the effects of tsunamis. The most significant, not surprisingly, are often the most devastating, such as the 2011 Tohoku, Japan earthquake and tsunami. The goal of this poster is to give a brief overview of the occurrence of tsunamis and then focus specifically on several significant tsunamis. There are various criteria to determine the most significant tsunamis: the number of deaths, amount of damage, maximum runup height, had a major impact on tsunami science or policy, etc. As a result, descriptions will include some of the most costly (2011 Tohoku, Japan), the most deadly (2004 Sumatra, 1883 Krakatau), and the highest runup ever observed (1958 Lituya Bay, Alaska). The discovery of the Cascadia subduction zone as the source of the 1700 Japanese "Orphan" tsunami and a future tsunami threat to the U.S. northwest coast, contributed to the decision to form the U.S. National Tsunami Hazard Mitigation Program. The great Lisbon earthquake of 1755 marked the beginning of the modern era of seismology. Knowledge gained from the 1964 Alaska earthquake and tsunami helped confirm the theory of plate tectonics. The 1946 Alaska, 1952 Kuril Islands, 1960 Chile, 1964 Alaska, and the 2004 Banda Aceh, tsunamis all resulted in warning centers or systems being established.The data descriptions on this poster were extracted from NOAA's National Geophysical Data Center (NGDC) global historical tsunami database. Additional information about these tsunamis, as well as water level data can be found by accessing the NGDC website www.ngdc.noaa.gov/hazard/

  6. Addition of Rice Bran Arabinoxylan to Curcumin Therapy May Be of Benefit to Patients With Early-Stage B-Cell Lymphoid Malignancies (Monoclonal Gammopathy of Undetermined Significance, Smoldering Multiple Myeloma, or Stage 0/1 Chronic Lymphocytic Leukemia): A Preliminary Clinical Study.

    PubMed

    Golombick, Terry; Diamond, Terrence H; Manoharan, Arumugam; Ramakrishna, Rajeev

    2016-06-01

    Hypothesis Prior studies on patients with early B-cell lymphoid malignancies suggest that early intervention with curcumin may lead to delay in progressive disease and prolonged survival. These patients are characterized by increased susceptibility to infections. Rice bran arabinoxylan (Ribraxx) has been shown to have immunostimulatory, anti-inflammatory, and proapoptotic effects. We postulated that addition of Ribraxx to curcumin therapy may be of benefit. Study design Monoclonal gammopathy of undetermined significance (MGUS)/smoldering multiple myeloma (SMM) or stage 0/1 chronic lymphocytic leukemia (CLL) patients who had been on oral curcumin therapy for a period of 6 months or more were administered both curcumin (as Curcuforte) and Ribraxx. Methods Ten MGUS/SMM patients and 10 patients with stage 0/1 CLL were administered 6 g of curcumin and 2 g Ribraxx daily. Blood samples were collected at baseline and at 2-month intervals for a period of 6 months, and various markers were monitored. MGUS/SMM patients included full blood count (FBC); paraprotein; free light chains/ratio; C-reactive protein (CRP)and erythrocyte sedimentation rate (ESR); B2 microglobulin and immunological markers. Markers monitored for stage 0/1 CLL were FBC, CRP and ESR, and immunological markers. Results Of 10 MGUS/SMM patients,5 (50%) were neutropenic at baseline, and the Curcuforte/Ribraxx combination therapy showed an increased neutrophil count, varying between 10% and 90% among 8 of the 10 (80%) MGUS/SMM patients. An additional benefit of the combination therapy was the potent effect in reducing the raised ESR in 4 (44%) of the MGUS/SMM patients. Conclusion Addition of Ribraxx to curcumin therapy may be of benefit to patients with early-stage B-cell lymphoid malignancies.

  7. Teardrop bladder: additional considerations

    SciTech Connect

    Wechsler, R.J.; Brennan, R.E.

    1982-07-01

    Nine cases of teardrop bladder (TDB) seen at excretory urography are presented. In some of these patients, the iliopsoas muscles were at the upper limit of normal in size, and additional evaluation of the perivesical structures with computed tomography (CT) was necessary. CT demonstrated only hypertrophied muscles with or without perivesical fat. The psoas muscles and pelvic width were measured in 8 patients and compared with the measurements of a control group of males without TDB. Patients with TDB had large iliopsoas muscles and narrow pelves compared with the control group. The psoas muscle width/pelvic width ratio was significantly greater (p < 0.0005) in patients with TDB than in the control group, with values of 1.04 + 0.05 and 0.82 + 0.09, respectively. It is concluded that TDB is not an uncommon normal variant in black males. Both iliopsoas muscle hypertrophy and a narrow pelvis are factors that predispose a patient to TDB.

  8. Social anxiety and the interpretation of positive social events.

    PubMed

    Alden, Lynn E; Taylor, Charles T; Mellings, Tanna M J B; Laposa, Judith M

    2008-05-01

    We report four independent studies that examined the relationship between social interaction anxiety and the tendency to interpret positive social events in a threat-maintaining manner. Study 1 described the development of a scale that measures negative interpretations of positive social events, the interpretation of positive events scale (IPES). Study 2 cross-validated the structure of the IPES and established that social interaction anxiety explained significant variance in negative interpretations of positive social events beyond negative affect in general. Study 3 demonstrated that negative interpretation of positive events was significantly greater in a clinical sample of patients with generalized social anxiety disorder (GSAD) than a matched group of non-anxious community controls. In addition, within the GSAD group, the IPES was associated with negative social predictions following a positive interaction. Finally, study 4 confirmed that negative interpretations of positive social events mediated the relationship between social interaction anxiety and low positive affect.

  9. Positive Psychologists on Positive Constructs

    ERIC Educational Resources Information Center

    Lyubomirsky, Sonja

    2012-01-01

    Comments on the original article by McNulty and Fincham (see record 2011-15476-001). In their article, the authors offered compelling evidence that constructs such as forgiveness and optimism can have both beneficial and adverse consequences, depending on the context. Their caution about labeling particular psychological processes as "positive" is…

  10. Significant Steps Forward

    ERIC Educational Resources Information Center

    Schuta, Theresa; Mauricio, David

    2012-01-01

    Three years ago, the authors accepted positions as high school principals in Buffalo City (NY) Schools after serving as elementary school principals in the district for many years. In their new positions, they were to lead schools that were designated by the New York State Department of Education as "persistently lowest achieving,"…

  11. Gene Positioning

    PubMed Central

    Ferrai, Carmelo; de Castro, Inês Jesus; Lavitas, Liron; Chotalia, Mita; Pombo, Ana

    2010-01-01

    Eukaryotic gene expression is an intricate multistep process, regulated within the cell nucleus through the activation or repression of RNA synthesis, processing, cytoplasmic export, and translation into protein. The major regulators of gene expression are chromatin remodeling and transcription machineries that are locally recruited to genes. However, enzymatic activities that act on genes are not ubiquitously distributed throughout the nucleoplasm, but limited to specific and spatially defined foci that promote preferred higher-order chromatin arrangements. The positioning of genes within the nuclear landscape relative to specific functional landmarks plays an important role in gene regulation and disease. PMID:20484389

  12. POSITIONING DEVICE

    DOEpatents

    Wall, R.R.; Peterson, D.L.

    1959-09-15

    A positioner is described for a vertical reactor-control rod. The positioner comprises four grooved friction rotatable members that engage the control rod on all sides and shift it longitudinally. The four friction members are drivingly interconnected for conjoint rotation and comprise two pairs of coaxial members. The members of each pair are urged toward one another by hydraulic or pneumatic pressure and thus grip the control rod so as to hold it in any position or adjust it. Release of the by-draulic or pneumatic pressure permits springs between the friction members of each pair to force them apart, whereby the control rod moves quickly by gravity into the reactor.

  13. Positioning apparatus

    DOEpatents

    Vogel, Max A.; Alter, Paul

    1986-01-01

    An apparatus for precisely positioning materials test specimens within the optimum neutron flux path emerging from a neutron source located in a housing. The test specimens are retained in a holder mounted on the free end of a support pivotably mounted and suspended from a movable base plate. The support is gravity biased to urge the holder in a direction longitudinally of the flux path against the housing. Means are provided for moving the base plate in two directions to effect movement of the holder in two mutually perpendicular directions normal to the axis of the flux path.

  14. Positioning apparatus

    DOEpatents

    Vogel, Max A.; Alter, Paul

    1986-05-06

    An apparatus for precisely positioning materials test specimens within the optimum neutron flux path emerging from a neutron source located in a housing. The test specimens are retained in a holder mounted on the free end of a support pivotably mounted and suspended from a movable base plate. The support is gravity biased to urge the holder in a direction longitudinally of the flux path against the housing. Means are provided for moving the base plate in two directions to effect movement of the holder in two mutually perpendicular directions normal to the axis of the flux path.

  15. Positioning apparatus

    DOEpatents

    Vogel, M.A.; Alter, P.

    1983-07-07

    An apparatus is provided for precisely adjusting the position of an article relative to a beam emerging from a neutron source disposed in a housing. The apparatus includes a support pivotably mounted on a movable base plate and freely suspended therefrom. The support is gravity biased toward the housing and carries an article holder movable in a first direction longitudinally of the axis of said beam and normally urged into engagement against said housing. Means are provided for moving the base plate in two directions to effect movement of the suspended holder in two mutually perpendicular directions, respectively, normal to the axis of the beam.

  16. Better position

    NASA Astrophysics Data System (ADS)

    Carlowicz, Michael

    The U.S. Global Positioning System (GPS) will soon become more accurate for civilian users, improving the quality of navigation and of some types of scientific research. The Clinton Administration announced March 29 that within a decade, the federal government will stop degrading the civilian GPS signal and will allow nonmilitary users access to the same clear signals that U.S. troops rely upon.Designed as dual-use system with primary use by the American military, the GPS is a constellation of 24 satellites that allows soldiers to determine their exact positions (in latitude and longitude) anywhere in the world. While the GPS is operated by the Department of Defense (DoD), scientists and adventurous civilians have been able to purchase small, portable GPS devices. However, the U.S. military has kept to itself a capability known as “selective availability” that provides a much more precise signal than is available to the public. According to the White House, that selected signal will be available to all users within 4-10 years.

  17. Factoring local sequence composition in motif significance analysis.

    PubMed

    Ng, Patrick; Keich, Uri

    2008-01-01

    We recently introduced a biologically realistic and reliable significance analysis of the output of a popular class of motif finders. In this paper we further improve our significance analysis by incorporating local base composition information. Relying on realistic biological data simulation, as well as on FDR analysis applied to real data, we show that our method is significantly better than the increasingly popular practice of using the normal approximation to estimate the significance of a finder's output. Finally we turn to leveraging our reliable significance analysis to improve the actual motif finding task. Specifically, endowing a variant of the Gibbs Sampler with our improved significance analysis we demonstrate that de novo finders can perform better than has been perceived. Significantly, our new variant outperforms all the finders reviewed in a recently published comprehensive analysis of the Harbison genome-wide binding location data. Interestingly, many of these finders incorporate additional information such as nucleosome positioning and the significance of binding data.

  18. Non-additive and additive genetic effects on extraversion in 3314 Dutch adolescent twins and their parents.

    PubMed

    Rettew, David C; Rebollo-Mesa, Irene; Hudziak, James J; Willemsen, Gonneke; Boomsma, Dorret I

    2008-05-01

    The influence of non-additive genetic influences on personality traits has been increasingly reported in adult populations. Less is known, however, with respect to younger samples. In this study, we examine additive and non-additive genetic contributions to the personality trait of extraversion in 1,689 Dutch twin pairs, 1,505 mothers and 1,637 fathers of the twins. The twins were on average 15.5 years (range 12-18 years). To increase statistical power to detect non-additive genetic influences, data on extraversion were also collected in parents and simultaneously analyzed. Genetic modeling procedures incorporating age as a potential modifier of heritability showed significant influences of additive (20-23%) and non-additive genetic factors (31-33%) in addition to unshared environment (46-48%) for adolescents and for their parents. The additive genetic component was slightly and positively related to age. No significant sex differences were found for either extraversion means or for the magnitude of the genetic and environmental influences. There was no evidence of non-random mating for extraversion in the parental generation. Results show that in addition to additive genetic influences, extraversion in adolescents is influenced by non-additive genetic factors.

  19. Adduct Formation in ESI/MS by Mobile Phase Additives

    NASA Astrophysics Data System (ADS)

    Kruve, Anneli; Kaupmees, Karl

    2017-03-01

    Adduct formation is a common ionization method in electrospray ionization mass spectrometry (ESI/MS). However, this process is poorly understood and complicated to control. We demonstrate possibilities to control adduct formation via mobile phase additives in ESI positive mode for 17 oxygen and nitrogen bases. Mobile phase additives were found to be a very effective measure for manipulating the formation efficiencies of adducts. An appropriate choice of additive may increase sensitivity by up to three orders of magnitude. In general, sodium adduct [M + Na]+ and protonated molecule [M + H]+ formation efficiencies were found to be in good correlation; however, the former were significantly more influenced by mobile phase properties. Although the highest formation efficiencies for both species were observed in water/acetonitrile mixtures not containing additives, the repeatability of the formation efficiencies was found to be improved by additives. It is concluded that mobile phase additives are powerful, yet not limiting factors, for altering adduct formation.

  20. Additive Similarity Trees

    ERIC Educational Resources Information Center

    Sattath, Shmuel; Tversky, Amos

    1977-01-01

    Tree representations of similarity data are investigated. Hierarchical clustering is critically examined, and a more general procedure, called the additive tree, is presented. The additive tree representation is then compared to multidimensional scaling. (Author/JKS)

  1. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  2. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  3. Significance of corneal arcus.

    PubMed

    Raj, K Mohan; Reddy, P Arun Subhash; Kumar, Vikram Chella

    2015-04-01

    The corneal arcus consists of cholesterol, phospholipids and triglycerides. As serum triglyceride is one of the accurate of lipid metabolic state, greater importance was given, and it was found to be elevated in 72% of patients and a positive correlation with increasing age. This suggests a strong correlation between impairment of lipid metabolism and incidence of corneal arcus.

  4. Significance of corneal arcus

    PubMed Central

    Raj, K. Mohan; Reddy, P. Arun Subhash; Kumar, Vikram Chella

    2015-01-01

    The corneal arcus consists of cholesterol, phospholipids and triglycerides. As serum triglyceride is one of the accurate of lipid metabolic state, greater importance was given, and it was found to be elevated in 72% of patients and a positive correlation with increasing age. This suggests a strong correlation between impairment of lipid metabolism and incidence of corneal arcus. PMID:26015693

  5. EU assessment of enterococci as feed additives.

    PubMed

    Becquet, Philippe

    2003-12-01

    Particular micro-organisms such as enterococcal strains are used as probiotics in feed. Observations indicate a positive effect of such strains on the gut flora, especially for young animals or during feed transition phases. This favourable effect is perceived by the farmers as a means of maintenance of the health status of the animals (e.g. less diarrhoea) and results in significant improvement of animal performance. Micro-organisms have been used since the end of the 1980s in animal feeds and were strictly regulated in 1993, when they were introduced under the scope of Council Directive 70/524/EEC of 23 November 1970 on additives in animal nutrition on feed additives. After a transition period, which ended in the year 2000, every microbial strain must now be assessed by the EU bodies and authorised by a Commission Regulation, before it can be placed on the market for use in feedingstuffs. Council Directive 70/524/EEC on feed additives is based on three main principles: (1) pre-market authorisation, (2) positive list principle, and (3) thorough risk assessment of the effect of a particular strain on human and animal health as well as on the environment. Therefore, before introducing a new enterococcal strain preparation or promote a new use of an approved product, a dossier has to be submitted to the authorities, following the guidelines, as published in Commission Directive 94/40/EEC [Commission Directive 94/40/EC of 22 July 1994 amending Council Directive 87/153/EEC fixing guidelines for the assessment of additives in animal nutrition]. These guidelines contain detailed evaluation methods. The safety requirements refer to (1) the target animal categories, (2) the consumer and the environment (presence of toxins and virulence factors as well as antibiotic resistance and transferability are assessed), and (3) the workers, based on requirements of Council Directive 89/391/EEC.

  6. Polylactides in additive biomanufacturing.

    PubMed

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed.

  7. Additive Manufactured Product Integrity

    NASA Technical Reports Server (NTRS)

    Waller, Jess; Wells, Doug; James, Steve; Nichols, Charles

    2017-01-01

    NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

  8. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  9. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  10. Adverse reactions to drug additives.

    PubMed

    Simon, R A

    1984-10-01

    There is a long list of additives used by the pharmaceutical industry. Most of the agents used have not been implicated in hypersensitivity reactions. Among those that have, only reactions to parabens and sulfites have been well established. Parabens have been shown to be responsible for rare immunoglobulin E-mediated reactions that occur after the use of local anesthetics. Sulfites, which are present in many drugs, including agents commonly used to treat asthma, have been shown to provoke severe asthmatic attacks in sensitive individuals. Recent studies indicate that additives do not play a significant role in "hyperactivity." The role of additives in urticaria is not well established and therefore the incidence of adverse reactions in this patient population is simply not known. In double-blind, placebo-controlled studies, reactions to tartrazine or additives other than sulfites, if they occur at all, are indeed quite rare for the asthmatic population, even for the aspirin-sensitive subpopulation.

  11. Significance of periodogram peaks

    NASA Astrophysics Data System (ADS)

    Süveges, Maria; Guy, Leanne; Zucker, Shay

    2016-10-01

    Three versions of significance measures or False Alarm Probabilities (FAPs) for periodogram peaks are presented and compared for sinusoidal and box-like signals, with specific application on large-scale surveys in mind.

  12. Significant Scales in Community Structure

    PubMed Central

    Traag, V. A.; Krings, G.; Van Dooren, P.

    2013-01-01

    Many complex networks show signs of modular structure, uncovered by community detection. Although many methods succeed in revealing various partitions, it remains difficult to detect at what scale some partition is significant. This problem shows foremost in multi-resolution methods. We here introduce an efficient method for scanning for resolutions in one such method. Additionally, we introduce the notion of “significance” of a partition, based on subgraph probabilities. Significance is independent of the exact method used, so could also be applied in other methods, and can be interpreted as the gain in encoding a graph by making use of a partition. Using significance, we can determine “good” resolution parameters, which we demonstrate on benchmark networks. Moreover, optimizing significance itself also shows excellent performance. We demonstrate our method on voting data from the European Parliament. Our analysis suggests the European Parliament has become increasingly ideologically divided and that nationality plays no role. PMID:24121597

  13. SPA: Solar Position Algorithm

    NASA Astrophysics Data System (ADS)

    Reda, Ibrahim; Andreas, Afshin

    2015-04-01

    The Solar Position Algorithm (SPA) calculates the solar zenith and azimuth angles in the period from the year -2000 to 6000, with uncertainties of +/- 0.0003 degrees based on the date, time, and location on Earth. SPA is implemented in C; in addition to being available for download, an online calculator using this code is available at http://www.nrel.gov/midc/solpos/spa.html.

  14. Positive quadrature formulas III

    NASA Astrophysics Data System (ADS)

    Peherstorfer, Franz

    2008-12-01

    First we discuss briefly our former characterization theorem for positive interpolation quadrature formulas (abbreviated qf), provide an equivalent characterization in terms of Jacobi matrices, and give links and applications to other qf, in particular to Gauss-Kronrod quadratures and recent rediscoveries. Then for any polynomial t_n which generates a positive qf, a weight function (depending on n ) is given with respect to which t_n is orthogonal to mathbb{P}_{n-1} . With the help of this result an asymptotic representation of the quadrature weights is derived. In general the asymptotic behaviour is different from that of the Gaussian weights. Only under additional conditions do the quadrature weights satisfy the so-called circle law. Corresponding results are obtained for positive qf of Radau and Lobatto type.

  15. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  16. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  17. Predicting Nucleosome Positioning Using Multiple Evidence Tracks

    NASA Astrophysics Data System (ADS)

    Reynolds, Sheila M.; Weng, Zhiping; Bilmes, Jeff A.; Noble, William Stafford

    We describe a probabilistic model, implemented as a dynamic Bayesian network, that can be used to predict nucleosome positioning along a chromosome based on one or more genomic input tracks containing position-specific information (evidence). Previous models have either made predictions based on primary DNA sequence alone, or have been used to infer nucleosome positions from experimental data. Our framework permits the combination of these two distinct types of information. We show how this flexible framework can be used to make predictions based on either sequence-model scores or experimental data alone, or by using the two in combination to interpret the experimental data and fill in gaps. The model output represents the posterior probability, at each position along the chromosome, that a nucleosome core overlaps that position, given the evidence. This posterior probability is computed by integrating the information contained in the input evidence tracks along the entire input sequence, and fitting the evidence to a simple grammar of alternating nucleosome cores and linkers. In addition to providing a novel mechanism for the prediction of nucleosome positioning from arbitrary heterogeneous data sources, this framework is also applicable to other genomic segmentation tasks in which local scores are available from models or from data that can be interpreted as defining a probability assignment over labels at that position. The ability to combine sequence-based predictions and data from experimental assays is a significant and novel contribution to the ongoing research regarding the primary structure of chromatin and its effects upon gene regulation.

  18. Group Sparse Additive Models

    PubMed Central

    Yin, Junming; Chen, Xi; Xing, Eric P.

    2016-01-01

    We consider the problem of sparse variable selection in nonparametric additive models, with the prior knowledge of the structure among the covariates to encourage those variables within a group to be selected jointly. Previous works either study the group sparsity in the parametric setting (e.g., group lasso), or address the problem in the nonparametric setting without exploiting the structural information (e.g., sparse additive models). In this paper, we present a new method, called group sparse additive models (GroupSpAM), which can handle group sparsity in additive models. We generalize the ℓ1/ℓ2 norm to Hilbert spaces as the sparsity-inducing penalty in GroupSpAM. Moreover, we derive a novel thresholding condition for identifying the functional sparsity at the group level, and propose an efficient block coordinate descent algorithm for constructing the estimate. We demonstrate by simulation that GroupSpAM substantially outperforms the competing methods in terms of support recovery and prediction accuracy in additive models, and also conduct a comparative experiment on a real breast cancer dataset.

  19. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  20. Statistical Significance Testing.

    ERIC Educational Resources Information Center

    McLean, James E., Ed.; Kaufman, Alan S., Ed.

    1998-01-01

    The controversy about the use or misuse of statistical significance testing has become the major methodological issue in educational research. This special issue contains three articles that explore the controversy, three commentaries on these articles, an overall response, and three rejoinders by the first three authors. They are: (1)…

  1. Significance of brown dwarfs

    NASA Technical Reports Server (NTRS)

    Black, D. C.

    1986-01-01

    The significance of brown dwarfs for resolving some major problems in astronomy is discussed. The importance of brown dwarfs for models of star formation by fragmentation of molecular clouds and for obtaining independent measurements of the ages of stars in binary systems is addressed. The relationship of brown dwarfs to planets is considered.

  2. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  3. Fused Lasso Additive Model

    PubMed Central

    Petersen, Ashley; Witten, Daniela; Simon, Noah

    2016-01-01

    We consider the problem of predicting an outcome variable using p covariates that are measured on n independent observations, in a setting in which additive, flexible, and interpretable fits are desired. We propose the fused lasso additive model (FLAM), in which each additive function is estimated to be piecewise constant with a small number of adaptively-chosen knots. FLAM is the solution to a convex optimization problem, for which a simple algorithm with guaranteed convergence to a global optimum is provided. FLAM is shown to be consistent in high dimensions, and an unbiased estimator of its degrees of freedom is proposed. We evaluate the performance of FLAM in a simulation study and on two data sets. Supplemental materials are available online, and the R package flam is available on CRAN. PMID:28239246

  4. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  5. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  6. Additives in plastics.

    PubMed

    Deanin, R D

    1975-06-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products.

  7. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  8. More Than Additional Space...

    ERIC Educational Resources Information Center

    CEFP Journal, 1973

    1973-01-01

    A much needed addition to the Jamestown Elementary School turned out to be more than an expansion of walls for more space. A new educational program, a limited budget, and a short time line were tackled on a team approach basis and were successfully resolved. (Author)

  9. Composite Defect Significance.

    DTIC Science & Technology

    1982-07-13

    A12i 299 COMPOSITE DEFECT SIGNIFICANCE(U) MATERIALS SCIENCES 1/1 \\ CORP SPRING HOUSE PA S N CHATTERJEE ET AL. 13 JUL 82 MSC/TFR/1288/il87 NADC-80848...Directorate 30 Sensors & Avionics Technology Directorate 40 Communication & Navigation Technology Directorate 50 Software Computer Directorate 60 Aircraft ...instructions concerning commercial products herein do not constitute an endorsement by the Government nor do they convey or imply the license or right to use

  10. Significance Analysis of Prognostic Signatures

    PubMed Central

    Beck, Andrew H.; Knoblauch, Nicholas W.; Hefti, Marco M.; Kaplan, Jennifer; Schnitt, Stuart J.; Culhane, Aedin C.; Schroeder, Markus S.; Risch, Thomas; Quackenbush, John; Haibe-Kains, Benjamin

    2013-01-01

    A major goal in translational cancer research is to identify biological signatures driving cancer progression and metastasis. A common technique applied in genomics research is to cluster patients using gene expression data from a candidate prognostic gene set, and if the resulting clusters show statistically significant outcome stratification, to associate the gene set with prognosis, suggesting its biological and clinical importance. Recent work has questioned the validity of this approach by showing in several breast cancer data sets that “random” gene sets tend to cluster patients into prognostically variable subgroups. This work suggests that new rigorous statistical methods are needed to identify biologically informative prognostic gene sets. To address this problem, we developed Significance Analysis of Prognostic Signatures (SAPS) which integrates standard prognostic tests with a new prognostic significance test based on stratifying patients into prognostic subtypes with random gene sets. SAPS ensures that a significant gene set is not only able to stratify patients into prognostically variable groups, but is also enriched for genes showing strong univariate associations with patient prognosis, and performs significantly better than random gene sets. We use SAPS to perform a large meta-analysis (the largest completed to date) of prognostic pathways in breast and ovarian cancer and their molecular subtypes. Our analyses show that only a small subset of the gene sets found statistically significant using standard measures achieve significance by SAPS. We identify new prognostic signatures in breast and ovarian cancer and their corresponding molecular subtypes, and we show that prognostic signatures in ER negative breast cancer are more similar to prognostic signatures in ovarian cancer than to prognostic signatures in ER positive breast cancer. SAPS is a powerful new method for deriving robust prognostic biological signatures from clinically annotated

  11. Addition of a single E2 binding site to the human papillomavirus (HPV) type 16 long control region enhances killing of HPV positive cells via HPV E2 protein-regulated herpes simplex virus type 1 thymidine kinase-mediated suicide gene therapy.

    PubMed

    Sharma, Rachna; Palefsky, Joel M

    2010-07-01

    Human papillomavirus type 16 (HPV16) is associated with the development of anogenital cancers and their precursor lesions, intraepithelial neoplasia. Treatment strategies against HPV-induced intraepithelial neoplasia are not HPV specific and mostly consist of physical removal or ablation of lesions. We had previously designed an HPV-specific approach to kill HPV-infected cells by the herpes simplex virus type 1 thymidine kinase (TK) gene driven by HPV E2 binding to E2-binding sites (E2BS) in the native HPV16 long control region. E2-induced TK expression renders the cells sensitive to the prodrug ganciclovir. To optimize this therapeutic approach, we modified the native long control region by adding variable numbers of E2BS adjacent to E2BS4, resulting in greatly increased cell death in HPV-positive cell lines with variable levels of E2 protein expression and no reduction in HPV specificity. Our results showed maximum increase in TK expression and cell killing when one additional E2BS was added adjacent to E2BS. As HPV-infected patients also exhibit variable E2 expression across lesions and within a lesion, this approach may potentiate the clinical utility of the herpes simplex virus type 1 TK/ganciclovir therapeutic approach.

  12. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  13. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  14. The glycemic index: physiological significance.

    PubMed

    Esfahani, Amin; Wong, Julia M W; Mirrahimi, Arash; Srichaikul, Korbua; Jenkins, David J A; Kendall, Cyril W C

    2009-08-01

    The glycemic index (GI) is a physiological assessment of a food's carbohydrate content through its effect on postprandial blood glucose concentrations. Evidence from trials and observational studies suggests that this physiological classification may have relevance to those chronic Western diseases associated with overconsumption and inactivity leading to central obesity and insulin resistance. The glycemic index classification of foods has been used as a tool to assess potential prevention and treatment strategies for diseases where glycemic control is of importance, such as diabetes. Low GI diets have also been reported to improve the serum lipid profile, reduce C-reactive protein (CRP) concentrations, and aid in weight control. In cross-sectional studies, low GI or glycemic load diets (mean GI multiplied by total carbohydrate) have been associated with higher levels of high-density lipoprotein cholesterol (HDL-C), with reduced CRP concentrations, and, in cohort studies, with decreased risk of developing diabetes and cardiovascular disease. In addition, some case-control and cohort studies have found positive associations between dietary GI and risk of various cancers, including those of the colon, breast, and prostate. Although inconsistencies in the current findings still need to be resolved, sufficient positive evidence, especially with respect to renewed interest in postprandial events, suggests that the glycemic index may have a role to play in the treatment and prevention of chronic diseases.

  15. Studies Of Positive-Position-Feedback Control

    NASA Technical Reports Server (NTRS)

    Fanson, James L.; Caughey, Thomas K.

    1992-01-01

    Report discusses theoretical and experimental studies of positive-position-feedback control for suppressing vibrations in large flexible structures. Positive-position-feedback control involves placement of actuators and sensors on structure; control voltages applied to actuators in response to outputs of sensors processed via compensator algorithm. Experiments demonstrate feasibility of suppressing vibrations by positive position feedback, and spillover of vibrational energy into uncontrolled modes has stabilizing effect if control gain sufficiently small.

  16. Electrophoresis of Positioned Nucleosomes

    PubMed Central

    Castelnovo, Martin; Grauwin, Sébastian

    2007-01-01

    We present in this article an original approach to compute the electrophoretic mobility of rigid nucleo-protein complexes like nucleosomes. This model allows us to address theoretically the influence of complex position along DNA, as well as wrapped length of DNA on the electrophoretic mobility of the complex. The predictions of the model are in qualitative agreement with experimental results on mononucleosomes assembled on short DNA fragments (<400 bp). Influences of additional experimental parameters like gel concentration, ionic strength, and effective charges are also discussed in the framework of the model, and are found to be qualitatively consistent with experiments when available. Based on the present model, we propose a simple semi-empirical formula describing positioning of nucleosomes as seen through electrophoresis. PMID:17277181

  17. Robot Position Sensor Fault Tolerance

    NASA Technical Reports Server (NTRS)

    Aldridge, Hal A.

    1997-01-01

    Robot systems in critical applications, such as those in space and nuclear environments, must be able to operate during component failure to complete important tasks. One failure mode that has received little attention is the failure of joint position sensors. Current fault tolerant designs require the addition of directly redundant position sensors which can affect joint design. A new method is proposed that utilizes analytical redundancy to allow for continued operation during joint position sensor failure. Joint torque sensors are used with a virtual passive torque controller to make the robot joint stable without position feedback and improve position tracking performance in the presence of unknown link dynamics and end-effector loading. Two Cartesian accelerometer based methods are proposed to determine the position of the joint. The joint specific position determination method utilizes two triaxial accelerometers attached to the link driven by the joint with the failed position sensor. The joint specific method is not computationally complex and the position error is bounded. The system wide position determination method utilizes accelerometers distributed on different robot links and the end-effector to determine the position of sets of multiple joints. The system wide method requires fewer accelerometers than the joint specific method to make all joint position sensors fault tolerant but is more computationally complex and has lower convergence properties. Experiments were conducted on a laboratory manipulator. Both position determination methods were shown to track the actual position satisfactorily. A controller using the position determination methods and the virtual passive torque controller was able to servo the joints to a desired position during position sensor failure.

  18. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  19. Positive lubrication system

    NASA Technical Reports Server (NTRS)

    Smith, Dennis W.; Hooper, Fred L.

    1990-01-01

    As part of the development of an autonomous lubrication system for spin bearings, a system was developed to deliver oil to grease-lubricated bearings upon demand. This positive oil delivery system (PLUS) consists of a pressurized reservoir with a built-in solenoid valve that delivers a predictable quantity of oil to the spin bearing through a system of stainless steel tubes. Considerable testing was performed on the PLUS to characterize its performance and verify its effectiveness, along with qualifying it for flight. Additional development is underway that will lead to the fully autonomous active lubrication system.

  20. Platelet additive solution - electrolytes.

    PubMed

    Azuma, Hiroshi; Hirayama, Junichi; Akino, Mitsuaki; Ikeda, Hisami

    2011-06-01

    Recent attention to solutions that replace most or all plasma in platelet concentrates, while maintaining satisfactory platelet function, is motivated by the potential of plasma reduction or depletion to mitigate various transfusion-related adverse events. This report considers the electrolytic composition of previously described platelet additive solutions, in order to draw general conclusions about what is required for platelet function and longevity. The optimal concentrations of Na(+) and Cl(-) are 69-115 mM. The presence of both K(+) and Mg(2+) in platelet suspension at nearly physiological concentrations (3-5mM and 1.5-3mM, respectively) is indispensable for good preservation capacity because both electrolytes are required to prevent platelet activation. In contrast to K(+) and Mg(2+), Ca(2+) may not be important because no free Ca(2+) is available in M-sol, which showed excellent platelet preservation capacity at less than 5% plasma concentration. The importance of bicarbonate (approximately 40 mM) can be recognized when the platelets are suspended in additive solution under less than 5% residual plasma concentration.

  1. Absolute Positioning Using the Global Positioning System

    DTIC Science & Technology

    1994-04-01

    Global Positioning System ( GPS ) has becom a useful tool In providing relativ survey...Includes the development of a low cost navigator for wheeled vehicles. ABSTRACT The Global Positioning System ( GPS ) has become a useful tool In providing...technique of absolute or point positioning involves the use of a single Global Positioning System ( GPS ) receiver to determine the three-dimenslonal

  2. Fungi producing significant mycotoxins.

    PubMed

    2012-01-01

    Mycotoxins are secondary metabolites of microfungi that are known to cause sickness or death in humans or animals. Although many such toxic metabolites are known, it is generally agreed that only a few are significant in causing disease: aflatoxins, fumonisins, ochratoxin A, deoxynivalenol, zearalenone, and ergot alkaloids. These toxins are produced by just a few species from the common genera Aspergillus, Penicillium, Fusarium, and Claviceps. All Aspergillus and Penicillium species either are commensals, growing in crops without obvious signs of pathogenicity, or invade crops after harvest and produce toxins during drying and storage. In contrast, the important Fusarium and Claviceps species infect crops before harvest. The most important Aspergillus species, occurring in warmer climates, are A. flavus and A. parasiticus, which produce aflatoxins in maize, groundnuts, tree nuts, and, less frequently, other commodities. The main ochratoxin A producers, A. ochraceus and A. carbonarius, commonly occur in grapes, dried vine fruits, wine, and coffee. Penicillium verrucosum also produces ochratoxin A but occurs only in cool temperate climates, where it infects small grains. F. verticillioides is ubiquitous in maize, with an endophytic nature, and produces fumonisins, which are generally more prevalent when crops are under drought stress or suffer excessive insect damage. It has recently been shown that Aspergillus niger also produces fumonisins, and several commodities may be affected. F. graminearum, which is the major producer of deoxynivalenol and zearalenone, is pathogenic on maize, wheat, and barley and produces these toxins whenever it infects these grains before harvest. Also included is a short section on Claviceps purpurea, which produces sclerotia among the seeds in grasses, including wheat, barley, and triticale. The main thrust of the chapter contains information on the identification of these fungi and their morphological characteristics, as well as factors

  3. Impacts of a book reading club intervention on enhancing parents' positive thinking.

    PubMed

    Hong, Zuway-R; Lin, Huann-shyang

    2012-03-01

    This study investigated the effects of participating in a book reading club on improving parents' positive interactions with children and positive thinking. A total of 85 parent volunteers were randomized into the experimental or comparison group. The Parent Questionnaire was used to measure positive thinking and interaction with children. Additionally interview results were used to triangulate and elucidate the findings. The findings revealed a positive impact on parents' positive thinking and interaction with children and that these were significant predictors of parents' positive thinking. Implications and recommendations are presented.

  4. Additive composition, for gasoline

    SciTech Connect

    Vataru, M.

    1989-01-10

    An admixture is described that comprises Diesel fuel and an additive composition added thereto which is between about 0.05 to about 2.0 percent by weight of the fuel, the composition comprising: (a) between about 0.05 and 25% relative weight parts of an organic peroxide, and (b) between about 0.1 and 25% relative weight parts of detergent selected from the component group that consists of: (i) fatty amines; (ii) ethoxylated and propoxylated derivatives of fatty amines; (iii) fatty diamines; (iv) fatty imidazlines; (v) polymeric amines and derivatives thereof; (vi) combination of one or more of the (i) through (v) components with carboxylic acid or acids having from three to forth carbon atoms, (c) from about 99.0 to about 50% by weight of a hydrocarbon solvent.

  5. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  6. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  7. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  8. Orthology confers intron position conservation

    PubMed Central

    2010-01-01

    Background With the wealth of genomic data available it has become increasingly important to assign putative protein function through functional transfer between orthologs. Therefore, correct elucidation of the evolutionary relationships among genes is a critical task, and attempts should be made to further improve the phylogenetic inference by adding relevant discriminating features. It has been shown that introns can maintain their position over long evolutionary timescales. For this reason, it could be possible to use conservation of intron positions as a discriminating factor when assigning orthology. Therefore, we wanted to investigate whether orthologs have a higher degree of intron position conservation (IPC) compared to non-orthologous sequences that are equally similar in sequence. Results To this end, we developed a new score for IPC and applied it to ortholog groups between human and six other species. For comparison, we also gathered the closest non-orthologs, meaning sequences close in sequence space, yet falling just outside the ortholog cluster. We found that ortholog-ortholog gene pairs on average have a significantly higher degree of IPC compared to ortholog-closest non-ortholog pairs. Also pairs of inparalogs were found to have a higher IPC score than inparalog-closest non-inparalog pairs. We verified that these differences can not simply be attributed to the generally higher sequence identity of the ortholog-ortholog and the inparalog-inparalog pairs. Furthermore, we analyzed the agreement between IPC score and the ortholog score assigned by the InParanoid algorithm, and found that it was consistently high for all species comparisons. In a minority of cases, the IPC and InParanoid score ranked inparalogs differently. These represent cases where sequence and intron position divergence are discordant. We further analyzed the discordant clusters to identify any possible preference for protein functions by looking for enriched GO terms and Pfam

  9. Benign Paroxysmal Positional Vertigo

    MedlinePlus

    ... Questionnaire Home Diseases and Conditions Benign Paroxysmal Positional Vertigo (BPPV) Benign Paroxysmal Positional Vertigo (BPPV) Condition Family HealthMenWomen Share Benign Paroxysmal Positional ...

  10. Additive lattice kirigami.

    PubMed

    Castle, Toen; Sussman, Daniel M; Tanis, Michael; Kamien, Randall D

    2016-09-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  11. Ceramics with Different Additives

    NASA Astrophysics Data System (ADS)

    Wang, Juanjuan; Feng, Lajun; Lei, Ali; Zhao, Kang; Yan, Aijun

    2014-09-01

    Li2CO3, MgCO3, BaCO3, and Bi2O3 dopants were introduced into CaCu3Ti4O12 (CCTO) ceramics in order to improve the dielectric properties. The CCTO ceramics were prepared by conventional solid-state reaction method. The phase structure, microstructure, and dielectric behavior were carefully investigated. The pure structure without any impurity phases can be confirmed by the x-ray diffraction patterns. Scanning Electron Microscopy (SEM) analysis illuminated that the grains of Ca0.90Li0.20Cu3Ti4O12 ceramics were greater than that of pure CCTO. It was important for the properties of the CCTO ceramics to study the additives in complex impedance spectroscopy. It was found that the Ca0.90Li0.20Cu3Ti4O12 ceramics had the higher permittivity (>45000), the lower dielectric loss (<0.025) than those of CCTO at 1 kHz at room temperature and good temperature stability from -30 to 75 °C.

  12. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  13. Positive position control of robotic manipulators

    NASA Technical Reports Server (NTRS)

    Baz, A.; Gumusel, L.

    1989-01-01

    The present, simple and accurate position-control algorithm, which is applicable to fast-moving and lightly damped robot arms, is based on the positive position feedback (PPF) strategy and relies solely on position sensors to monitor joint angles of robotic arms to furnish stable position control. The optimized tuned filters, in the form of a set of difference equations, manipulate position signals for robotic system performance. Attention is given to comparisons between this PPF-algorithm controller's experimentally ascertained performance characteristics and those of a conventional proportional controller.

  14. The Mozart Effect: Additional Data.

    PubMed

    Hughes, John R.

    2002-04-01

    After the review of the Mozart effect was published in this journal (Hughes JR. Epilepsy Behav 2001;2:369-417), additional data from the music of Haydn and Liszt have been analyzed that may account for the decrease in seizure activity originally reported during Mozart music. Even with these added data Mozart music continued to score significantly higher than the selections from the other six composers in one of the important characteristics of this music, namely, the repetition of the melody. However Haydn's values were second highest among Mozart, J. S. Bach, Wagner, Beethoven, Chopin, and Liszt.

  15. Additional Drive Circuitry for Piezoelectric Screw Motors

    NASA Technical Reports Server (NTRS)

    Smythe, Robert; Palmer, Dean; Gursel, Yekta; Reder, Leonard; Savedra, Raymond

    2004-01-01

    Modules of additional drive circuitry have been developed to enhance the functionality of a family of commercially available positioning motors (Picomotor . or equivalent) that provide linear motion controllable, in principle, to within increments .30 nm. A motor of this type includes a piezoelectric actuator that turns a screw. Unlike traditional piezoelectrically actuated mechanisms, a motor of this type does not rely on the piezoelectric transducer to hold position: the screw does not turn except when the drive signal is applied to the actuator.

  16. Modifications of Glycans: Biological Significance and Therapeutic Opportunities

    PubMed Central

    Muthana, Saddam M.; Campbell, Christopher; Gildersleeve, Jeffrey C.

    2012-01-01

    Carbohydrates play a central role in a wide range of biological processes. As with nucleic acids and proteins, modifications of specific sites within the glycan chain can modulate a carbohydrate’s overall biological function. For example, acylation, methylation, sulfation, epimerization, and phosphorylation can occur at various positions within a carbohydrate to modulate bioactivity. Therefore, there is significant interest in identifying discrete carbohydrate modifications and understanding their biological effects. Additionally, enzymes that catalyze those modifications and proteins that bind modified glycans provide numerous targets for therapeutic intervention. This review will focus on modifications of glycans that occur after the oligomer/polymer has been assembled, generally referred to as postglycosylational modifications. PMID:22195988

  17. Centenarians' "holy" memory: is being positive enough?

    PubMed

    Fairfield, Beth; Mammarella, Nicola; Di Domenico, Alberto

    2013-01-01

    The authors compared 18 centenarians' (M age = 100.1 years, SD = 1.8 years) recognition memory for emotional (positive, negative, and religious) pictures with 18 older adults (M age = 75.2 years, SD = 6.8 years). Participants observed a series of images that varied in emotional valence and meaning and were later asked to discriminate between old and new images in a series of pictures that included studied images as well as new images. Centenarians showed decreased recognition memory for positive and negative images items compared with older adults, F(1, 34) = 9.82, p < .01. In addition, a significant age by valence interaction was observed highlighting how centenarians remembered religious pictures better while older adults favoured positive information when only positive pictures were taken into consideration. Results are interpreted in terms of possible age-linked changes in meaningful goals that lead centenarians to focus on meaningful religious self-relevant information rather than simply on positive information.

  18. Positive computer-generated exercise electrocardiogram.

    PubMed

    MacKenzie, Ross

    2006-01-01

    The use of computerized averaging of the electrocardiogram (ECG) during stress testing has facilitated the removal of motion artifacts and baseline shifts. However, this process can introduce errors, which may not be appreciated by medical directors. Such errors can lead to significant ST depression in the absence of coronary artery disease. Such false-positive tests may lead to anxiety in the applicant, delays in accepting the application and unnecessary additional testing. This case study illustrates a common pitfall associated with using only a computer-generated exercise ECG for risk assessment of a life insurance applicant.

  19. The significance of anti-streptokinase antibodies.

    PubMed Central

    Lynch, M; Pentecost, B L; Littler, W A; Stockley, R A

    1994-01-01

    Antibodies to streptokinase (SK) are widespread in the population, but reports of their effect on the action of SK are conflicting. Specific anti-SK IgG was purified from the sera of 10 patients, five with low titres of anti-SK IgG and five with high titres. The effect of increasing specific anti-SK IgG antibodies on the action of SK was evaluated in vitro using a fluorimetric assay for plasmin and by a fibrin plate lysis assay. The inhibition of SK by whole plasma from a further group of patients was also assessed by the fibrin plate assay. There was a positive correlation between the serum antibody concentration and the quantity of specific anti-SK eluted (r = 0.797; P < 0.005). The addition of specific anti-SK IgG caused a dose-related decrease in SK activity (fluorimetric assay r = -0.93; P = 0.02; fibrin plate assay r = -0.98; P < 0.001). The addition of patient plasma to the fibrin plate assay also resulted in decreased lysis, which was dependent upon antibody titre (r = -0.95; P < 0.0001). Significant in vitro reduction of the activity of SK by specific antibody was demonstrated, and this was similar with plasma containing comparable amounts of antibody. The findings suggest that treatment with SK would be unlikely to induce an effective thrombolytic state when antibody titres are high (such as those seen within 2 years of an initial dose of SK). PMID:8004811

  20. The Kepler False Positive Table

    NASA Astrophysics Data System (ADS)

    Bryson, Steve; Kepler False Positive Working Group

    2015-01-01

    The Kepler Space Telescope has detected thousands of candidate exoplanets by observing transit signals in a sample of more than 190,000 stars. Many of these transit signals are false positives, defined as a transit-like signal that is not due to a planet orbiting the target star (or a bound companion if the target is a multiple-star system). Astrophysical causes of false positives include background eclipsing binaries, planetary transits not associated with the target star, and non-planetary eclipses of the target star by stellar companions. The fraction of Kepler planet candidates that are false positives ranges from about 10% at high Galactic latitudes to 40% at low Galactic latitudes. Creating a high-reliability planet candidate catalog for statistical studies such as occurrence rate calculations requires removing clearly identified false positives.The Kepler Object of Interest (KOI) catalog at the NExScI NASA Exoplanet Archive flags false positives, and will soon provide a high-level classification of false positives, but lacks detailed description of why a KOI was determined to be a false positive. The Kepler False Positive Working Group (FPWG) examines each false positive in detail to certify that it is correctly identified as a false positive, and determines the primary reason(s) a KOI is classified as a false positive. The work of the FPWG will be published as the Kepler False Positive Table, hosted at the NExScI NASA Exoplanet Archive.The Kepler False Positive Table provides detailed information on the evidence for background binaries, transits caused by stellar companions, and false alarms. In addition to providing insight into the Kepler false positive population, the false positive table gives information about the background binary population and other areas of astrophysical interest. Because a planet around a star not associated with the target star is considered a false positive, the false positive table likely contains further planet candidates

  1. MAGNETOMETRY, SELF-POTENTIAL, AND SEISMIC - ADDITIONAL GEOPHYSICAL METHODS HAVING POTENTIALLY SIGNIFICANT FUTURE UTILIZATION IN AGRICULTURE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Geophysical methods can provide important information in agricultural settings, and the use of these techniques are becoming more and more widespread. Magnetrometry, self-potential, and seismic are three geophysical methods, all of which have the potential for substantial future use in agriculture, ...

  2. Lesinurad: A significant advancement or just another addition to existing therapies of gout?

    PubMed

    Gupta, Ajay; Sharma, Pramod Kumar; Misra, Arup Kumar; Singh, Surjit

    2016-01-01

    Gout is a metabolic disorder that usually presents as recurrent episodes of acute arthritis due to deposition of crystals in joints and cartilages. Despite the availability of several drugs for gout, its management is still less than adequate. There is always a search for newer, safer, and more potent urate-lowering therapies for treating patients inadequately controlled with available drugs. Lesinurad in combination with a xanthine oxidase inhibitor provides an effective mode of therapy in the management of hyperuricemia associated with gout. Lesinurad is a selective uric acid transporter 1 (URAT1) inhibitor. URAT1 is responsible for the majority of uric acid absorption from kidneys to the circulation. Lesinurad was granted marketing approval based on three randomized, double-blind, placebo-controlled; phase III clinical trials. It is devoid of interaction with organic anion transporters (OATs) such as OAT1 and 3, responsible for drug-drug interactions, an undesirable property associated with probenecid. On-going research is more focused on reducing inflammation consequent to deposition of crystals rather than production and excretion of urate. Various targets are being explored, and interleukin-1 beta inhibition seems to be one of the most promising approaches.

  3. Lesinurad: A significant advancement or just another addition to existing therapies of gout?

    PubMed Central

    Gupta, Ajay; Sharma, Pramod Kumar; Misra, Arup Kumar; Singh, Surjit

    2016-01-01

    Gout is a metabolic disorder that usually presents as recurrent episodes of acute arthritis due to deposition of crystals in joints and cartilages. Despite the availability of several drugs for gout, its management is still less than adequate. There is always a search for newer, safer, and more potent urate-lowering therapies for treating patients inadequately controlled with available drugs. Lesinurad in combination with a xanthine oxidase inhibitor provides an effective mode of therapy in the management of hyperuricemia associated with gout. Lesinurad is a selective uric acid transporter 1 (URAT1) inhibitor. URAT1 is responsible for the majority of uric acid absorption from kidneys to the circulation. Lesinurad was granted marketing approval based on three randomized, double-blind, placebo-controlled; phase III clinical trials. It is devoid of interaction with organic anion transporters (OATs) such as OAT1 and 3, responsible for drug-drug interactions, an undesirable property associated with probenecid. On-going research is more focused on reducing inflammation consequent to deposition of crystals rather than production and excretion of urate. Various targets are being explored, and interleukin-1 beta inhibition seems to be one of the most promising approaches. PMID:28163535

  4. A POSITIONAL DATA SYSTEM

    DOEpatents

    Forster, G.A.

    1963-09-24

    between master and slave synchros is described. A threephase a-c power source is connected to the stators of the synchros and an error detector is connected to the rotors of the synchros to measure the phasor difference therebetween. A phase shift network shifts the phase of one of the rotors 90 degrees and a demodulator responsive thereto causes the phasor difference signal of the rotors to shift phase 180 degrees whenever the 90 degree phase shifted signal goes negative. The phase shifted difference signal has a waveform which, with the addition of small values of resistance and capacitance, gives a substantially pure d-c output whose amplitude and polarity is proportional to the magnitude and direction of the difference in the angular positions of the synchro's rotors. (AEC)

  5. Positive clinical neuroscience: explorations in positive neurology.

    PubMed

    Kapur, Narinder; Cole, Jonathan; Manly, Tom; Viskontas, Indre; Ninteman, Aafke; Hasher, Lynn; Pascual-Leone, Alvaro

    2013-08-01

    Disorders of the brain and its sensory organs have traditionally been associated with deficits in movement, perception, cognition, emotion, and behavior. It is increasingly evident, however, that positive phenomena may also occur in such conditions, with implications for the individual, science, medicine, and for society. This article provides a selective review of such positive phenomena--enhanced function after brain lesions, better-than-normal performance in people with sensory loss, creativity associated with neurological disease, and enhanced performance associated with aging. We propose that, akin to the well-established field of positive psychology and the emerging field of positive clinical psychology, the nascent fields of positive neurology and positive neuropsychology offer new avenues to understand brain-behavior relationships, with both theoretical and therapeutic implications.

  6. Recovery position - series (image)

    MedlinePlus

    ... CPR, the victim should be placed in the recovery position. The recovery position helps keep the victim's airway open. To put the victim in the recovery position grab the victim's leg and shoulder and ...

  7. Benign positional vertigo - aftercare

    MedlinePlus

    Vertigo - positional - aftercare; Benign paroxysmal positional vertigo - aftercare; BPPV - aftercare; Dizziness - positional vertigo ... Your health care provider may have treated your vertigo with the Epley maneuver . These are head movements ...

  8. Want Positive Behavior? Use Positive Language

    ERIC Educational Resources Information Center

    Wood, Chip; Freeman-Loftis, Babs

    2012-01-01

    Positive adult language is the professional use of words and tone of voice to enable students to learn in an engaged, active way. This includes learning social skills. To guide children toward choosing and maintaining positive behaviors, adults need to carefully choose the words and tone of voice used when speaking to them. Learning to use…

  9. Positive Education: Positive Psychology and Classroom Interventions

    ERIC Educational Resources Information Center

    Seligman, Martin E. P.; Ernst, Randal M.; Gillham, Jane; Reivich, Karen; Linkins, Mark

    2009-01-01

    Positive education is defined as education for both traditional skills and for happiness. The high prevalence worldwide of depression among young people, the small rise in life satisfaction, and the synergy between learning and positive emotion all argue that the skills for happiness should be taught in school. There is substantial evidence from…

  10. Arbuscular mycorrhizal fungal community response to warming and nitrogen addition in a semiarid steppe ecosystem.

    PubMed

    Kim, Yong-Chan; Gao, Cheng; Zheng, Yong; He, Xin-Hua; Yang, Wei; Chen, Liang; Wan, Shi-Qiang; Guo, Liang-Dong

    2015-05-01

    Understanding the response of arbuscular mycorrhizal (AM) fungi to warming and nitrogen (N) fertilization is critical to assess the impact of anthropogenic disturbance on ecosystem functioning under global climate change scenarios. In this study, AM fungal communities were examined in a full factorial design with warming and N addition in a semiarid steppe in northern China. Warming significantly increased AM fungal spore density, regardless of N addition, whilst N addition significantly decreased AM fungal extraradical hyphal density, regardless of warming. A total of 79 operational taxonomic units (OTUs) of AM fungi were recovered by 454 pyrosequencing of SSU rDNA. Warming, but not N addition, had a significant positive effect on AM fungal OTU richness, while warming and N addition significantly increased AM fungal Shannon diversity index. N addition, but not warming, significantly altered the AM fungal community composition. Furthermore, the changes in AM fungal community composition were associated with shifts in plant community composition indirectly caused by N addition. These findings highlight the different effects of warming and N addition on AM fungal communities and contribute to understanding AM fungal community responses to global environmental change scenarios in semiarid steppe ecosystems.

  11. Development of a Simple Radioactive marker System to Reduce Positioning Errors in Radiation Treatment

    SciTech Connect

    William H. Miller; Dr. Jatinder Palta

    2007-03-19

    The objective of this research is to implement an inexpensive, quick and simple monitor that provides an accurate indication of proper patient position during the treatment of cancer by external beam X-ray radiation and also checks for any significant changes in patient anatomy. It is believed that this system will significantly reduce the treatment margin, provide an additional, independent quality assurance check of positioning accuracy prior to all treatments and reduce the probability of misadministration of therapeutic dose.

  12. Improved nucleosome-positioning algorithm iNPS for accurate nucleosome positioning from sequencing data.

    PubMed

    Chen, Weizhong; Liu, Yi; Zhu, Shanshan; Green, Christopher D; Wei, Gang; Han, Jing-Dong Jackie

    2014-09-18

    Accurate determination of genome-wide nucleosome positioning can provide important insights into global gene regulation. Here, we describe the development of an improved nucleosome-positioning algorithm-iNPS-which achieves significantly better performance than the widely used NPS package. By determining nucleosome boundaries more precisely and merging or separating shoulder peaks based on local MNase-seq signals, iNPS can unambiguously detect 60% more nucleosomes. The detected nucleosomes display better nucleosome 'widths' and neighbouring centre-centre distance distributions, giving rise to sharper patterns and better phasing of average nucleosome profiles and higher consistency between independent data subsets. In addition to its unique advantage in classifying nucleosomes by shape to reveal their different biological properties, iNPS also achieves higher significance and lower false positive rates than previously published methods. The application of iNPS to T-cell activation data demonstrates a greater ability to facilitate detection of nucleosome repositioning, uncovering additional biological features underlying the activation process.

  13. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  14. False positive reduction for lung nodule CAD

    NASA Astrophysics Data System (ADS)

    Zhao, Luyin; Boroczky, Lilla; Drysdale, Jeremy; Agnihotri, Lalitha; Lee, Michael C.

    2007-03-01

    Computer-aided detection (CAD) algorithms 'automatically' identify lung nodules on thoracic multi-slice CT scans (MSCT) thereby providing physicians with a computer-generated 'second opinion'. While CAD systems can achieve high sensitivity, their limited specificity has hindered clinical acceptance. To overcome this problem, we propose a false positive reduction (FPR) system based on image processing and machine learning to reduce the number of false positive lung nodules identified by CAD algorithms and thereby improve system specificity. To discriminate between true and false nodules, twenty-three 3D features were calculated from each candidate nodule's volume of interest (VOI). A genetic algorithm (GA) and support vector machine (SVM) were then used to select an optimal subset of features from this pool of candidate features. Using this feature subset, we trained an SVM classifier to eliminate as many false positives as possible while retaining all the true nodules. To overcome the imbalanced nature of typical datasets (significantly more false positives than true positives), an intelligent data selection algorithm was designed and integrated into the machine learning framework, thus further improving the FPR rate. Three independent datasets were used to train and validate the system. Using two datasets for training and the third for validation, we achieved a 59.4% FPR rate while removing one true nodule on the validation datasets. In a second experiment, 75% of the cases were randomly selected from each of the three datasets and the remaining cases were used for validation. A similar FPR rate and true positive retention rate was achieved. Additional experiments showed that the GA feature selection process integrated with the proposed data selection algorithm outperforms the one without it by 5%-10% FPR rate. The methods proposed can be also applied to other application areas, such as computer-aided diagnosis of lung nodules.

  15. How a GNSS Receiver Is Held May Affect Static Horizontal Position Accuracy.

    PubMed

    Weaver, Steven A; Ucar, Zennure; Bettinger, Pete; Merry, Krista

    2015-01-01

    The static horizontal position accuracy of a mapping-grade GNSS receiver was tested in two forest types over two seasons, and subsequently was tested in one forest type against open sky conditions in the winter season. The main objective was to determine whether the holding position during data collection would result in significantly different static horizontal position accuracy. Additionally, we wanted to determine whether the time of year (season), forest type, or environmental variables had an influence on accuracy. In general, the F4Devices Flint GNSS receiver was found to have mean static horizontal position accuracy levels within the ranges typically expected for this general type of receiver (3 to 5 m) when differential correction was not employed. When used under forest cover, in some cases the GNSS receiver provided a higher level of static horizontal position accuracy when held vertically, as opposed to held at an angle or horizontally (the more natural positions), perhaps due to the orientation of the antenna within the receiver, or in part due to multipath or the inability to use certain satellite signals. Therefore, due to the fact that numerous variables may affect static horizontal position accuracy, we only conclude that there is weak to moderate evidence that the results of holding position are significant. Statistical test results also suggest that the season of data collection had no significant effect on static horizontal position accuracy, and results suggest that atmospheric variables had weak correlation with horizontal position accuracy. Forest type was found to have a significant effect on static horizontal position accuracy in one aspect of one test, yet otherwise there was little evidence that forest type affected horizontal position accuracy. Since the holding position was found in some cases to be significant with regard to the static horizontal position accuracy of positions collected in forests, it may be beneficial to have an

  16. Inline SAW RFID tag using time position and phase encoding.

    PubMed

    Härmä, Sanna; Arthur, Wesley G; Hartmann, Clinton S; Maev, Roman G; Plessky, Victor P

    2008-08-01

    Surface acoustic wave (SAW) radio-frequency identification (RFID) tags are encoded according to partial reflections of an interrogation signal by short metal reflectors. The standard encryption method involves time position encoding that uses time delays of response signals. However, the data capacity of a SAW RFID tag can be significantly enhanced by extracting additional phase information from the tag responses. In this work, we have designed, using FEM-BEM simulations, and fabricated, on 128 degrees -LiNbO3, inline 2.44-GHz SAW RFID tag samples that combine time position and phase encoding. Each reflective echo has 4 possible time positions and a phase of 0 degrees , -90 degrees , -180 degrees , or -270 degrees. This corresponds to 16 different states, i.e., 4 bits of data, per code reflector. In addition to the enhanced data capacity, our samples also exhibit a low loss level of -38 dB for code reflections.

  17. The stability of alloying additions in Zirconium

    NASA Astrophysics Data System (ADS)

    Lumley, S. C.; Murphy, S. T.; Burr, P. A.; Grimes, R. W.; Chard-Tuckey, P. R.; Wenman, M. R.

    2013-06-01

    identical number of atoms, and hence identical alloying addition concentrations of 1.85 at.%. This concentration is useful, as the weight percent composition is appropriate to commercial alloys, particularly in the case of Sn, although it is still relevant with other alloying additions.It is important to note that magnetic effects can have a substantial impact on overall lattice parameters and energies. Consequently care must be taken to ensure that the correct final magnetic state is converged upon. For all simulations carried out, this was achieved by setting the initial spin state of the system to the sum of individual formal spins of each of the present atoms and performing a spin polarised calculation. This produced reasonable magnetic configurations in most cases, with the exception of pure Cr. In order that the known magnetic state of Cr (anti-ferromagnetic) was achieved, it was necessary to specify the spin states of each atom individually, prior to convergence. Overall, much of the behaviour of this system can be understood in terms of simple trends in energy and defect volume as a function of the electronegativities, metallic radii or valence electron concentrations of the alloying elements. Formation energies for intermetallic phases show that some compounds are stable, while others are metastable. In particular, ZrFe and ZrNi are metastable, although ZrNi has a more negative formation energy. It may be that the presence of the ZrFe phase in Zr alloys is a result of kinetics rather than thermodynamics. It is also likely that the corresponding Ni and Fe phases stabilise each other to some degree. Speculative ZrCr and ZrV intermetallics have substantially positive formation energies, implying they are not stable. There is an energetic preference for Cr and Fe to reside on interstitial sites, rather than substitutional sites. With all additions, an interstitial alloy produces a significant, anisotropic lattice strain. Defect volumes for the different elements

  18. Shaft Position Optical Sensor

    NASA Technical Reports Server (NTRS)

    Blumenstock, Kenneth A. (Inventor); Hakum, Claef F. (Inventor); Johnson, Clarence S. (Inventor)

    2001-01-01

    The present invention is an optical sensor that senses the movement of a shaft. Detection of radial movement is made when a portion of light incident on the shaft sensor-target is blocked. For detection of axial movement, a disk with flat surface is mounted and used to block a portion of light. The variation in the amount of light allowed to pass through is a measure of the position of the shaft. As proposed by this invention, significant improvement is made with respect to sensitivity and linearity of the system when the light is permanently partially blocked. To accomplish this goal this invention adds a boss to the system. To eliminate possible drift of system performance due to LED degradation or temperature variation, a feedback feature is added to the system.

  19. The significance of methane ebullition

    NASA Astrophysics Data System (ADS)

    Walter, K.; Draluk, D. A.; Zimov, S. A.; Chapin, T.

    2003-12-01

    Ebullition is often the dominant pathway of methane release from aquatic ecosystems, yet it has seldom been carefully measured, due to heterogeneity in the spatial distribution and episodic release of gas bubbles. This likely results in an underestimation of total methane emission. We took advantage of ice formation over lake surfaces in NE Siberia to map patterns of ebullition. As ice forms in autumn, bubbles released from lake sediments are continually trapped under the ice at the water surface resulting in stacks of bubbles separated by thin films of ice called `koshkas'. Mapping the distribution of koshkas enabled us to identify `background' patterns of ebullition. In addition, we located `hot-spot' ebullition sites that remain permanently open throughout winter due to exceptionally high rates of methane bubbling. We used random and selective placement of underwater/ under-ice chambers to measure `background' and `hot-spot' fluxes annually. The combination of mapping and chamber measurements among different types of lakes and along lake margins varying in intensity of thermokarst erosion or aquatic plant growth enabled us to 1) improve estimates of total methane emissions from NE Siberian lakes, and to 2) identify landscape processes (thermokarst erosion vs. wetland mat formation) that enhance methane production and emission. Ignoring the contribution from hotspots, background ebullition comprised more than 75% of total methane emissions from lakes. From hotspot sites we measured up to 10-L m-2 of methane per day in early summer. Although hotspots comprised roughly 0.05% of the area along thermokarst margins, where they were most common, ebullition from hotspots contributed approximately 69% of the total ebullition flux. Including the flux from hotspots could increase estimates of CH4 ebullition from thermokarst margins 300%! Thermokarst lakes in Russia comprise a large proportion of the world's high latitude lakes; yet they are understudied. North Siberian

  20. Sample positioning in microgravity

    NASA Technical Reports Server (NTRS)

    Sridharan, Govind (Inventor)

    1993-01-01

    Repulsion forces arising from laser beams are provided to produce mild positioning forces on a sample in microgravity vacuum environments. The system of the preferred embodiment positions samples using a plurality of pulsed lasers providing opposing repulsion forces. The lasers are positioned around the periphery of a confinement area and expanded to create a confinement zone. The grouped laser configuration, in coordination with position sensing devices, creates a feedback servo whereby stable position control of a sample within microgravity environment can be achieved.

  1. Executive functioning and positive psychological characteristics: a replication and extension.

    PubMed

    Kruger, Gert H J

    2011-04-01

    Positive psychological characteristics and executive function are correlated with gratitude, satisfaction with life, and forgiveness. The goal of this study was to replicate these findings while examining two additional constructs, namely, hope and optimism. 113 students (25 men, 88 women) between the ages of 17 to 24 years (M = 19.4, SD = 1.5) volunteered to participate. Positive correlations between executive function and gratitude were found but mixed results were obtained for forgiveness and satisfaction with life. Hope and optimism correlated positively with executive function and hierarchical multiple regression analysis indicated that they contributed significantly to the explanation of executive functioning. Further investigation into relationships between executive functioning, its neurobiological substrates, and positive psychological attributes is recommended.

  2. Pyrophosphorolysis of CCA addition: implication for fidelity.

    PubMed

    Igarashi, Takao; Liu, Cuiping; Morinaga, Hironobu; Kim, Sangbumn; Hou, Ya-Ming

    2011-11-18

    In nucleic acid polymerization reaction, pyrophosphorolysis is the reversal of nucleotide addition, in which the terminal nucleotide is excised in the presence of inorganic pyrophosphate (PPi). The CCA enzymes are unusual RNA polymerases, which catalyze CCA addition to positions 74-76 at the tRNA 3' end without using a nucleic acid template. To better understand the reaction mechanism of CCA addition, we tested pyrophosphorolysis of CCA enzymes, which are divided into two structurally distinct classes. Here, we show that only class II CCA enzymes catalyze pyrophosphorolysis and that the reaction can initiate from all three CCA positions and proceed processively until the removal of nucleotide C74. Pyrophosphorolysis of class II enzymes establishes a fundamental difference from class I enzymes, and it is achieved only with the tRNA structure and with specific divalent metal ions. Importantly, pyrophosphorolysis enables class II enzymes to efficiently remove an incorrect A75 nucleotide from the 3' end, at a rate much faster than the rate of A75 incorporation, suggesting the ability to perform a previously unexpected quality control mechanism for CCA synthesis. Measurement of kinetic parameters of the class II Escherichia coli CCA enzyme reveals that the enzyme catalyzes pyrophosphorolysis slowly relative to the forward nucleotide addition and that it exhibits weak binding affinity to PPi relative to NTP, suggesting a mechanism in which PPi is rapidly released after each nucleotide addition as a driving force to promote the forward synthesis of CCA.

  3. How Safe Are Color Additives?

    MedlinePlus

    ... Home For Consumers Consumer Updates How Safe are Color Additives? Share Tweet Linkedin Pin it More sharing ... Consumer Updates RSS Feed Download PDF (380 K) Color additives give the red tint to your fruit ...

  4. Detergent Additive for Lubricating Oils,

    DTIC Science & Technology

    The Russian patent pertains to a method of producing additives for lubricating oils . A method is known for producing an antiwear additive for... lubricating oils by processing phenols with phosphorus oxychloride, phosphoric acid esters are obtained. In order to give the additive detergent properties

  5. Dimethylamylamine: a drug causing positive immunoassay results for amphetamines.

    PubMed

    Vorce, Shawn P; Holler, Justin M; Cawrse, Brian M; Magluilo, Joseph

    2011-04-01

    The Department of Defense (DoD) operates six forensic urine drug-testing laboratories that screen close to 5 million urine samples for amphetamines yearly. Recently, the DoD laboratories have observed a significant decrease in the confirmation rates for amphetamines because of specimens screening positive by two separate immunoassays and confirming negative by gas chromatography-mass spectrometry (GC-MS). Previous studies conducted by the Division of Forensic Toxicology, Armed Force Institute of Pathology (AFIP) utilizing a GC-MS basic drug screen and a designer drug screen revealed no common compound or compound classes as to the cause of the immunoassay-positive results. Additional information obtained from an immunoassay vendor suggested the anorectic compound dimethylamylamine (DMAA) may be the cause of the false-positive screens. An additional 134 false-positive samples were received and analyzed using liquid chromatography-tandem mass spectrometry (LC-MS-MS) for DMAA. LC-MS-MS analysis revealed the presence of DMAA in 92.3% of the false-positive samples at a concentration of approximately 6.0 mg/L DMAA, causing a positive screen on both immunoassay kits.

  6. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  7. Vertebral position alters paraspinal muscle spindle responsiveness in the feline spine: effect of positioning duration.

    PubMed

    Ge, Weiqing; Long, Cynthia R; Pickar, Joel G

    2005-12-01

    Proprioceptive information from paraspinal tissues including muscle contributes to neuromuscular control of the vertebral column. We investigated whether the history of a vertebra's position can affect signalling from paraspinal muscle spindles. Single unit recordings were obtained from muscle spindle afferents in the L6 dorsal roots of 30 Nembutal-anaesthetized cats. Each afferent's receptive field was in the intact muscles of the low back. The L6 vertebra was controlled using a displacement-controlled feedback motor and was held in each of three different conditioning positions for durations of 0, 2, 4, 6 and 8 s. Conditioning positions (1.0-2.2 mm dorsal and ventral relative to an intermediate position) were based upon the displacement that loaded the L6 vertebra to 50-60% of the cat's body weight. Following conditioning positions that stretched (hold-long) and shortened (hold-short) the spindle, the vertebra was repositioned identically and muscle spindle discharge at rest and to movement was compared with conditioning at the intermediate position. Hold-short conditioning augmented mean resting spindle discharge by +4.1 to +6.2 impulses s(-1); however, the duration of hold-short did not significantly affect this increase (F(4,145) = 0.49, P = 0.74). The increase was maintained at the beginning of vertebral movement but quickly returned to baseline. Conversely, hold-long conditioning significantly diminished mean resting spindle discharge by -2.0 to -16.1 impulses s(-1) (F(4,145) = 11.23, P < 0.001). The relationship between conditioning duration and the diminished resting discharge could be described by a quadratic (F(1,145) = 9.28, P = 0.003) revealing that the effects of positioning history were fully developed within 2 s of conditioning. In addition, 2 s or greater of hold-long conditioning significantly diminished spindle discharge to vertebral movement by -5.7 to -10.0 impulses s(-1) (F(4,145) = 11.0, P < 0.001). These effects of vertebral positioning

  8. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  9. Positive Deviance: Learning from Positive Anomalies

    ERIC Educational Resources Information Center

    LeMahieu, Paul G.; Nordstrum, Lee E.; Gale, Dick

    2017-01-01

    Purpose: This paper is one of seven in this volume, each elaborating different approaches to quality improvement in education. The purpose of this paper is to delineate a methodology called positive deviance. Design/methodology/approach: The paper presents the origins, theoretical foundations, core principles and a case study demonstrating an…

  10. The Positivity Scale

    ERIC Educational Resources Information Center

    Caprara, Gian Vittorio; Alessandri, Guido; Eisenberg, Nancy; Kupfer, A.; Steca, Patrizia; Caprara, Maria Giovanna; Yamaguchi, Susumu; Fukuzawa, Ai; Abela, John

    2012-01-01

    Five studies document the validity of a new 8-item scale designed to measure "positivity," defined as the tendency to view life and experiences with a positive outlook. In the first study (N = 372), the psychometric properties of Positivity Scale (P Scale) were examined in accordance with classical test theory using a large number of…

  11. The Global Positioning System

    DTIC Science & Technology

    1989-05-01

    Global Positioning System ( GPS ) and current program status are provided. The importance of...the NAVSTAR Global Positioning System (NAVSTAR GPS or GPS ) will have on future weapons employment. The study will: examine why we need a high...Washington, D.C., 24 January, 1984. Malone, Daniel K. GPS /NAVSTAR. Military Review, March 1986. Nepean, Phillip The NAVSTAR Global Positioning System

  12. Sanitary Surveys & Significant Deficiencies Presentation

    EPA Pesticide Factsheets

    The Sanitary Surveys & Significant Deficiencies Presentation highlights some of the things EPA looks for during drinking water system site visits, how to avoid significant deficiencies and what to do if you receive one.

  13. Accretionary orogens: definition, character, significance

    NASA Astrophysics Data System (ADS)

    Cawood, P. A.; Kroener, A.; Windley, B. F.

    2003-04-01

    Classic models of orogens involve a Wilson cycle of ocean opening and closing with orogenesis related to continent-continent collision. Such models fail to explain the geological history of a significant number of orogenic belts throughout the world in which deformation, metamorphism and crustal growth took place in an environment of on-going plate convergence. These belts are termed accretionary orogens but have also been refereed to as non-collisional orogens, Pacific-type orogens, Turkic-type and exterior orogens. Accretionary orogens evolve in generally curvilinear belts comprising dominantly mafic to silicic igneous rocks and their sedimentary products and accumulated largely in marine settings. They are variably deformed and metamorphosed by tectono-thermal events aligned parallel to, and punctuating, facies trends. Accretionary orogens form at sites of subduction of oceanic lithosphere and consist of magmatic arcs systems along with material accreted from the downgoing plate and eroded from the upper plate. Deformational features include structures formed in extension and compressive environments during steady-state convergence (arc/backarc vs. accretionary prism) that are overprinted by short regional compressive orogenic events. Orogenesis takes place through coupling across the plate boundary with strain concentrated in zones of mechanical and thermal weakening such as the magmatic arc and back arc region. Potential driving mechanisms for coupling include accretion of buoyant lithosphere (terrane accretion), flat slab subduction, and rapid absolute upper plate motion over-riding the downgoing plate. The Circum-Pacific region provides outstanding examples of accretionary orogens. The Pacific formed during breakup of Rodinia in the Neoproterozoic and has never subsequently closed, resulting in a series of overall ocean-ward younging orogenic systems that have always faced an open ocean, yet have been the sites of repeated tectono-thermal events and

  14. Increasing Positive Interactive Classroom Behavior.

    ERIC Educational Resources Information Center

    Kotcher, Elaine; Doremus, Richard R.

    During the spring of 1972 training workshops for 88 elementary and secondary teachers of the Great Neck Public Schools held to examine four hypotheses: 1) workshops in training teachers to observe classroom behavior would significantly increase these same teachers' positive classroom interactive behaviors consisting of teacher, pupil-pupil,…

  15. Effect of glutathione addition in sparkling wine.

    PubMed

    Webber, Vanessa; Dutra, Sandra Valduga; Spinelli, Fernanda Rodrigues; Marcon, Ângela Rossi; Carnieli, Gilberto João; Vanderlinde, Regina

    2014-09-15

    This study aims to evaluate the effect of the addition of glutathione (GSH) on secondary aromas and on the phenolic compounds of sparkling wine elaborated by traditional method. It was added 10 and 20 mg L(-1) of GSH to must and to base wine. The determination of aroma compounds was performed by gas chromatography. Phenolic compounds and glutathione content were analyzed by high performance liquid chromatography. Sparkling wines with addition of GSH to must showed lower levels of total phenolic compounds and hydroxycinnamic acids. Furthermore, the sparkling wine with addition of GSH to must showed higher levels of 2-phenylethanol, 3-methyl-1-butanol and diethyl succinate, and lower concentrations of ethyl decanoate, octanoic and decanoic acids. The GSH addition to the must show a greater influence on sparkling wine than to base wine, however GSH addition to base wine seems retain higher SO2 free levels. The concentration of GSH added showed no significant difference.

  16. Precision positioning device

    DOEpatents

    McInroy, John E.

    2005-01-18

    A precision positioning device is provided. The precision positioning device comprises a precision measuring/vibration isolation mechanism. A first plate is provided with the precision measuring mean secured to the first plate. A second plate is secured to the first plate. A third plate is secured to the second plate with the first plate being positioned between the second plate and the third plate. A fourth plate is secured to the third plate with the second plate being positioned between the third plate and the fourth plate. An adjusting mechanism for adjusting the position of the first plate, the second plate, the third plate, and the fourth plate relative to each other.

  17. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-09

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  18. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  19. [Interdisciplinary position paper "Perioperative pain management"].

    PubMed

    Likar, R; Jaksch, W; Aigmüller, T; Brunner, M; Cohnert, T; Dieber, J; Eisner, W; Geyrhofer, S; Grögl, G; Herbst, F; Hetterle, R; Javorsky, F; Kress, H G; Kwasny, O; Madersbacher, S; Mächler, H; Mittermair, R; Osterbrink, J; Stöckl, B; Sulzbacher, M; Taxer, B; Todoroff, B; Tuchmann, A; Wicker, A; Sandner-Kiesling, A

    2017-04-13

    Despite many positive developments, postoperative pain and its treatment is still not always given the necessary attention. Severe pain after surgical procedures affects a significant proportion of patients. This very fact is not only detrimental to the immediate recovery process, but can also form the basis for the development of chronic pain conditions.An adequate and effective management of perioperative pain requires appropriate organizational structures. This multidisciplinary paper which was initiated by the Austrian Society for Anaesthesiology and Intensive Care and the Austrian Pain Society and developed together with numerous specialist and professional societies dealing with the subject aims at supporting the organization of perioperative pain management structures and to make best use of proven concepts. Additional recommendations describe specific interventions for selected types of intervention.

  20. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  1. Additive Effects on Asymmetric Catalysis.

    PubMed

    Hong, Liang; Sun, Wangsheng; Yang, Dongxu; Li, Guofeng; Wang, Rui

    2016-03-23

    This review highlights a number of additives that can be used to make asymmetric reactions perfect. Without changing other reaction conditions, simply adding additives can lead to improved asymmetric catalysis, such as reduced reaction time, improved yield, or/and increased selectivity.

  2. Abnormal Position and Presentation of the Fetus

    MedlinePlus

    ... Interest (Quiz) Breast Cancer (Video) Overview of the Female Reproductive System (News) Study: Plenty of IV Fluids May Make Childbirth Safer, Easier (News) Zejula Approved for Certain Female Cancers Additional Content Medical News Abnormal Position and ...

  3. Prognostic significance of tumor subtypes in male breast cancer: a population-based study.

    PubMed

    Leone, José Pablo; Leone, Julieta; Zwenger, Ariel Osvaldo; Iturbe, Julián; Vallejo, Carlos Teodoro; Leone, Bernardo Amadeo

    2015-08-01

    Substantial controversy exists about the prognostic role of tumor subtypes in male breast cancer (MaBC). The aim of this study was to analyze the characteristics of each tumor subtype in MaBC and its association with prognosis compared with other factors. We evaluated MaBC patients between 2010 and 2012 with known estrogen receptor, progesterone receptor [together hormone receptor (HR)] status, and human epidermal growth factor receptor 2 (HER2) status reported to the Surveillance, Epidemiology, and End Results program. Patients were classified as: HR-positive/HER2-negative, HR-positive/HER2-positive, HR-negative/HER2-positive, and triple-negative (TN). Univariate and multivariate analyses determined the effect of each variable on overall survival (OS). We included 960 patients. Patient distribution was 84.9 % HR-positive/HER2-negative, 11.6 % HR-positive/HER2-positive, 0.6 % HR-negative/HER2-positive, and 2.9 % TN. TN patients were younger, had higher grade, presented with more advanced stage, were more likely to have mastectomy, and to die of breast cancer (all P < 0.05). Univariate analysis showed that HER2 positivity was associated with shorter OS (hazard ratio 1.90, P = 0.031) and TN patients had worse prognosis (hazard ratio 5.10, P = 0.0004). In multivariate analysis, older patients (hazard ratio 3.10, P = 0.032), those with stage IV (hazard ratio 16.27, P < 0.001) and those with TN tumors (hazard ratio 4.61, P = 0.002) had significantly worse OS. We observed significant differences in patient characteristics according to tumor subtype. HER2-positive and TN represented a small proportion of cases. In addition to age and stage, tumor subtype has clear influence on OS in MaBC.

  4. Positive criminology in practice.

    PubMed

    Ronel, Natti; Segev, Dana

    2014-11-01

    The discourse regarding offender rehabilitation has been criticized by various scholars who have claimed that reducing negative causes and managing risk will not automatically prompt positive human development and elements that are associated with desistance. Positive criminology is an innovative concept that challenges the common preoccupation with negative elements, by placing emphasis on human encounters and forces of inclusion that are experienced positively by target individuals and that can promote crime desistance. However, as the concept is relatively new, there are still no guiding principles for the practice of positive criminology that could direct research and the criminal justice system. This article attempts to fill that gap by providing principles that could be practiced by criminal justice personnel and examples of different interventions that reflect positive criminology. The article also provides ideological explanations for adopting the concept of positive criminology in practice.

  5. NAVSTAR Global Positioning System.

    DTIC Science & Technology

    1988-04-01

    number) The NAVSTAR Global Positioning System ( GPS ) is an all-weather, Jam-resistant, continuous-operations space-based, passive radio navigation and...with an understanding of the capabilities and limitations of the NAVSTAR Global Positioning System ( GPS ). II. Problem: To fight the next battle...navigation equipment and was not able to navigate on instruments or across a distant 9000-foot mountain. Had a NAVSTAR Global Positioning System ( GPS

  6. 78 FR 16476 - Procurement List Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-15

    ... Attendant Service McConnell Air Force Base, KS. NPA: Training, Rehabilitation, & Development Institute, Inc... service and impact of the additions on the current or most recent contractors, the Committee has... following action will not have a significant impact on a substantial number of small entities. The...

  7. 76 FR 23997 - Procurement List; Addition

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-29

    ... impact of the addition on the current or most recent contractors, the Committee has determined that the... a significant impact on a substantial number of small entities. The major factors considered for... other compliance requirements for small entities other than the small organization that will provide...

  8. Beam position monitor

    DOEpatents

    Alkire, Randy W.; Rosenbaum, Gerold; Evans, Gwyndaf

    2003-07-22

    An apparatus for determining the position of an x-ray beam relative to a desired beam axis. Where the apparatus is positioned along the beam path so that a thin metal foil target intersects the x-ray beam generating fluorescent radiation. A PIN diode array is positioned so that a portion of the fluorescent radiation is intercepted by the array resulting in an a series of electrical signals from the PIN diodes making up the array. The signals are then analyzed and the position of the x-ray beam is determined relative to the desired beam path.

  9. Beam position monitor

    SciTech Connect

    Alkire, Randy W.; Rosenbaum, Gerold; Evans, Gwyndaf

    2000-09-21

    An apparatus for determining the position of an x-ray beam relative to a desired beam axis where the apparatus is positioned along the beam path so that a thin metal foil target intersects the x-ray beam generating fluorescent radiation. A PIN diode array is positioned so that a portion of the fluorescent radiation is intercepted by the array resulting in a series of electrical signals from the PIN diodes making up the array. The signals are then analyzed and the position of the x-ray beam is determined relative to the desired beam path.

  10. [Effects of nitrogen and water addition on soil bacterial diversity and community structure in temperate grasslands in northern China].

    PubMed

    Yang, Shan; Li, Xiao-bing; Wang, Ru-zhen; Cai, Jiang-ping; Xu, Zhu-wen; Zhang, Yu-ge; Li, Hui; Jiang, Yong

    2015-03-01

    In this study, we measured the responses of soil bacterial diversity and community structure to nitrogen (N) and water addition in the typical temperate grassland in northern China. Results showed that N addition significantly reduced microbial biomass carbon (MBC) and microbial biomass nitrogen (MBN) under regular precipitation treatment. Similar declined trends of MBC and MBN caused by N addition were also found under increased precipitation condition. Nevertheless, water addition alleviated the inhibition by N addition. N addition exerted no significant effects. on bacterial α-diversity indices, including richness, Shannon diversity and evenness index under regular precipitation condition. Precipitation increment tended to increase bacterial α-diversity, and the diversity indices of each N gradient under regular precipitation were much lower than that of the corresponding N addition rate under increased precipitation. Correlation analysis showed that soil moisture, nitrate (NO3(-)-N) and ammonium (NH4+-N) were significantly negatively correlated with bacterial evenness index, and MBC and MBN had a significant positive correlation with bacterial richness and evenness. Non-metric multidimensional scaling (NMDS) ordination illustrated that the bacterial communities were significantly separated by N addition rates, under both water ambient and water addition treatments. Redundancy analysis (RDA) revealed that soil MBC, MBN, pH and NH4+-N were the key environmental factors for shaping bacterial communities.

  11. Characteristics of Positive Autobiographical Memories in Adulthood

    ERIC Educational Resources Information Center

    Bluck, Susan; Alea, Nicole

    2009-01-01

    The characteristics of positive autobiographical memory narratives were examined in younger and older adults. Narratives were content-coded for the extent to which they contained indicators of affect, sensory imagery, and cognition. Affect was additionally assessed through self-report. Young adults expressed more positive affect and less sensory…

  12. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  13. Plastid position in Arabidopsis columella cells is similar in microgravity and on a random-positioning machine

    NASA Technical Reports Server (NTRS)

    Kraft, T. F.; van Loon, J. J.; Kiss, J. Z.

    2000-01-01

    In order to study gravity effects on plant structure and function, it may become necessary to remove the g-stimulus. On Earth, various instruments such as clinostats have been used by biologists in an attempt to neutralize the effects of gravity. In this study, the position of amyloplasts was assayed in columella cells in the roots of Arabidopsis thaliana (L.) Heynh. seedlings grown in the following conditions: on Earth, on a two-dimensional clinostat at 1 rpm, on a three-dimensional clinostat (also called a random-positioning machine, or an RPM), and in space (true microgravity). In addition, the effects of these gravity treatments on columella cell area and plastid area also were measured. In terms of the parameters measured, only amyloplast position was affected by the gravity treatments. Plastid position was not significantly different between spaceflight and RPM conditions but was significantly different between spaceflight and the classical two-dimensional clinostat treatments. Flanking columella cells showed a greater susceptibility to changes in gravity compared to the central columella cells. In addition, columella cells of seedlings that were grown on the RPM did not exhibit deleterious effects in terms of their ultrastructure as has been reported previously for seedlings grown on a two-dimensional clinostat. This study supports the hypothesis that the RPM provides a useful simulation of weightlessness.

  14. Evaluation of the Positive Re-Entry in Corrections Program: A Positive Psychology Intervention With Prison Inmates.

    PubMed

    Huynh, Kim H; Hall, Brittany; Hurst, Mark A; Bikos, Lynette H

    2015-08-01

    Two groups of male inmates (n = 31, n = 31) participated in the Positive Re-Entry in Corrections Program (PRCP). This positive psychology intervention focused on teaching offenders skills that facilitate re-entry into the community. Offenders participated in weekly lectures, discussions, and homework assignments focused on positive psychology principles. The two groups differed in duration of treatment (8 weeks and 12 weeks). Participants completed pre- and post-intervention measures of gratitude, hope, and life satisfaction. Using a 2 × 2 mixed design ANOVA, we hypothesized that the intervention (with two between-subjects levels of 8 and 12 weeks) and duration (with two repeated measures levels of pre and post) of treatment would moderate pre- to post-intervention change. Results indicated significant differences on pre- and post-intervention scores for both groups of offenders on all measures. The analysis did not yield statistically significant differences between groups, demonstrating no additive benefits from the inclusion of four additional sessions, thus saving time and money for correctional programming and funding. This research supports the use of positive psychology in prison interventions.

  15. [The emergence of positive occupational health psychology].

    PubMed

    Bakker, Arnold B; Rodríguez-Muñoz, Alfredo; Derks, Daantje

    2012-02-01

    The aim of this paper is to provide an overview of the emerging concept of Positive Occupational Health Psychology (POHP). We discuss the usefulness of focusing on positive constructs in order to understand the path to health and well-being at work. We describe research findings on several POHP topics, including engagement, psychological capital, and job crafting. Additionally, we review the first positive interventions in this field and conclude by identifying some specific questions for future research.

  16. Anaerobic sludge digestion with a biocatalytic additive

    SciTech Connect

    Ghosh, S.; Henry, M.P.; Fedde, P.A.

    1982-01-01

    The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without the additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.

  17. Radiation Therapy: Additional Treatment Options

    MedlinePlus

    ... SNIPEND SNIPSTART Find A Radiation Oncologist SNIPEND Additional Treatment Options SNIPSTART A A SNIPEND Chemotherapy Medicines prescribed ... such as antibodies, to fight cancer. Novel Targeted Therapies Cancer doctors now know much more about how ...

  18. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  19. Positioning and locking apparatus

    DOEpatents

    Hayward, M.L.; Harper, W.H.

    1987-06-30

    A positioning and locking apparatus are disclosed including a fixture having a rotatable torque ring provided with a plurality of cam segments for automatically guiding a container into a desired location within the fixture. Rotation of the ring turns the container into a final position in pressure sealing relation against a hatch member. 6 figs.

  20. Positioning and locking apparatus

    DOEpatents

    Hayward, Milton L.; Harper, William H.

    1987-01-01

    A positioning and locking apparatus including a fixture having a rotatable torque ring provided with a plurality of cam segments for automatically guiding a container into a desired location within the fixture. Rotation of the ring turns the container into a final position in pressure sealing relation against a hatch member.

  1. Positioning With GPS: 1985

    NASA Astrophysics Data System (ADS)

    Remondi, Benjamin W.; Hothem, Larry D.

    The First International Symposium on Precise Positioning With the Global Positioning System (GPS) was held in Rockville, Maryland from April 15 to April 19, 1985; 600 participants from 31 countries attended. Sponsors included the International Union of Geodesy and Geophysics, the International Association of Geodesy, the Defense Mapping Agency (DMA), and the National Oceanic and Atmospheric Administration (NOAA) in cooperation with the American Society of Civil Engineers. GPS uses the NAVSTAR (an acronym for Navigation and Satellite Timing and Ranging) satellite system developed by the Department of Defense (DOD).Although this symposium was limited to precise positioning with GPS, the scope of precise positioning was left open. Without a doubt, precise relative positioning with L band carrier phase measurements was the most important topic. Also included were certain high-accuracy applications of pseudorange measurements, such as orbit determination, time transfer, and navigation. Administration, policy, hardware, software, processing, and applications in these areas were also covered. Intentionally left out were areas in which high positional accuracy was not important (e.g., commercial aviation). Attendees presented 89 papers, which were organized into 15 sessions covering nine subject areas: overview, status, and policy; GPS time and orbits; user equipment; user equipment testing; modeling and processing; applications; survey positioning results; practical aspects of geodesy; and dynamic positioning.

  2. Positioning and locking apparatus

    DOEpatents

    Hayward, M.L.; Harper, W.H.

    1985-06-19

    A positioning and locking apparatus including a fixture having a rotatable torque ring provided with a plurality of cam segments for automatically guiding a container into a desired location within the fixture. Rotation of the ring turns the container into a final position in pressure sealing relation against a hatch member.

  3. Microbial biosurfactants as additives for food industries.

    PubMed

    Campos, Jenyffer Medeiros; Stamford, Tânia Lúcia Montenegro; Sarubbo, Leonie Asfora; de Luna, Juliana Moura; Rufino, Raquel Diniz; Banat, Ibrahim M

    2013-01-01

    Microbial biosurfactants with high ability to reduce surface and interfacial surface tension and conferring important properties such as emulsification, detergency, solubilization, lubrication and phase dispersion have a wide range of potential applications in many industries. Significant interest in these compounds has been demonstrated by environmental, bioremediation, oil, petroleum, food, beverage, cosmetic and pharmaceutical industries attracted by their low toxicity, biodegradability and sustainable production technologies. Despite having significant potentials associated with emulsion formation, stabilization, antiadhesive and antimicrobial activities, significantly less output and applications have been reported in food industry. This has been exacerbated by uneconomical or uncompetitive costing issues for their production when compared to plant or chemical counterparts. In this review, biosurfactants properties, present uses and potential future applications as food additives acting as thickening, emulsifying, dispersing or stabilising agents in addition to the use of sustainable economic processes utilising agro-industrial wastes as alternative substrates for their production are discussed.

  4. Significant Decisions in Labor Cases.

    ERIC Educational Resources Information Center

    Monthly Labor Review, 1979

    1979-01-01

    Several significant court decisions involving labor cases are discussed including a series of decisions concerning constitutional protections afforded aliens; the First Amendment and national labor relations laws; and the bifurcated backpay rule. (BM)

  5. Astronomical Significance of Ancient Monuments

    NASA Astrophysics Data System (ADS)

    Simonia, I.

    2011-06-01

    Astronomical significance of Gokhnari megalithic monument (eastern Georgia) is considered. Possible connection of Amirani ancient legend with Gokhnari monument is discussed. Concepts of starry practicality and solar stations are proposed.

  6. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  7. HF mitigation via the Texaco-UOP HF additive technology

    SciTech Connect

    Sheckler, J.C.; Hammershaimb, H.U. ); Ross, L.J. ); Comey, K.R. III . Research and Development)

    1994-01-01

    Alkylation is one of the key processes used by refiners to produce high-octane gasoline. In the alkylation process, light olefins and isobutane are converted to alkylate, a high-octane, low-vapor-pressure, paraffinic gasoline-blending component. Because of its clean burning characteristics and ability to contribute to lower emissions, alkylate is a highly valued component in premium and reformulated gasolines. Alkylation process technology using hydrogen fluoride (HF) as a catalyst has been widely used for many years. Since the mid-1980s, a primary concern has been the tendency of HF to form an aerosol when HF is released to the atmosphere. Much effort has gone into the development of measures to ensure the safe handling of HF in the refinery environment. Texaco and UOP have under development an HF additive technology. The key to this technology is the discovery of a class of additives that form a complex with HF to significantly reduce the aerosol-forming tendency of the catalyst system and still maintain acceptable catalytic performance and product quality. The purpose of this paper is to provide an update on the development status of the Texaco-UOP HF additive technology. Aerosol reduction has been demonstrated in small-scale laboratory release tests as well as in larger scale wind tunnel release tests. The catalytic performance of the HF additive has been demonstrated in laboratory alkylation facilities and in a short-term experimental trial in a full-scale refinery unit. On the basis of the positive results obtained in the test program, a project is under way to implement the HF additive technology on a continuous basis in an existing Texaco alkylation unit by the third quarter of 1994.

  8. Statistical Significance vs. Practical Significance: An Exploration through Health Education

    ERIC Educational Resources Information Center

    Rosen, Brittany L.; DeMaria, Andrea L.

    2012-01-01

    The purpose of this paper is to examine the differences between statistical and practical significance, including strengths and criticisms of both methods, as well as provide information surrounding the application of various effect sizes and confidence intervals within health education research. Provided are recommendations, explanations and…

  9. [Amygdalin - structure and clinical significance].

    PubMed

    Zdrojewicz, Zygmunt; Otlewska, Anna; Hackemer, Paweł; Otlewska, Agnieszka

    2015-05-01

    In this publication we described amygdalin. It was isolated for the first time in the 19th century. Amygdalin is called interchangeably vitamin B17 or laetrile. Since more than a hundred years, there has been reports about its unique anticancer properties. We tried to introduce the present knowledge about therapeutic efficacy of laetrile. Most of these studies has been made in the in vitro environment. The lack of appropriate studies forced scientists to examine the positive influence of amygdalin on many diseases like: bladder cancer, prostate cancer, cervical cancer, colon cancer, promyelocytic leukemia, chronic kidney disease, psoriasis and other.

  10. Sleep position and shoulder pain.

    PubMed

    Zenian, John

    2010-04-01

    The overuse theory for musculoskeletal joint pain cannot explain adequately the occurrence of shoulder pain in those who do not engage in activities that involve repeated and stressful use of the shoulder since the percentage of the painful right shoulders usually does not match the percentage of dominant right arms in such individuals. An alternative hypothesis is presented to propose that shoulder pain is caused by postural immobility in the decubitus or side position during sleep. Prolonged pressure on the shoulder caused by the weight of the thorax can produce enough damage to cause subsequent shoulder pain. In order to test this hypothesis, a preliminary study was carried out to compare the laterality of shoulder pain with the laterality of sleep position. The calculated laterality ratios for sleep position and shoulder pain were found to be strikingly similar, suggesting a causal relationship between the two phenomena. However, the prevalence of shoulder pain in the general population was found to be smaller than the percentage of the time people would spend sleeping in the decubitus position. This discrepancy could be explained by the idea that in order for shoulder pain to develop subjects may have to spend longer times in the same decubitus position before changing to another position than the average person would. Additional evidence from published clinical studies also supports the postural theory of shoulder pain. More studies can be done to test this hypothesis by focusing on the sleep habits of patients with shoulder pain. According to the present hypothesis shoulder pain should for the most part occur on the side that the patient preferred to sleep on before the onset of shoulder pain. The postural theory of shoulder pain provides the possibility for a new and noninvasive method to treat shoulder pain by the modification of posture during sleep.

  11. Positional demands of professional rugby.

    PubMed

    Lindsay, Angus; Draper, Nick; Lewis, John; Gieseg, Steven P; Gill, Nicholas

    2015-01-01

    Rugby union is a physically intense intermittent sport coupled with high force collisions. Each position within a team has specific requirements which are typically based on speed, size and skill. The aim of this study was to investigate the contemporary demands of each position and whether they can explain changes in psychophysiological stress. Urine and saliva samples were collected before and after five selected Super 15 rugby games from 37 players. Total neopterin (NP), cortisol and immunoglobulin A were analysed by SCX-high performance liquid chromatography and enzyme linked immunosorbent assay. Global positioning system software provided distance data, while live video analysis provided impact data. All contemporary demands were analysed as events per minute of game time. Forwards were involved in more total impacts, tackles and rucks compared to backs (p < 0.001), while backs were involved in more ball carries and covered more total distance and distance at high speed per minute of game time (p < 0.01). Loose forwards, inside and outside backs covered significantly more distance at high speed (p < 0.01), while there was a negligible difference with number of impacts between the forward positions. There was also minimal difference between positions in the percentage change in NP, cortisol and sIgA. The results indicate distance covered and number of impacts per minute of game time is position-dependent whereas changes in psychophysiological stress are independent. This information can be used to adapt training and recovery interventions to better prepare each position based on the physical requirements of the game.

  12. [Total analysis of organic rubber additives].

    PubMed

    He, Wen-Xuan; Robert, Shanks; You, Ye-Ming

    2010-03-01

    In the present paper, after middle pressure chromatograph separation using both positive phase and reversed-phase conditions, the organic additives in ethylene-propylene rubber were identified by infrared spectrometer. At the same time, by using solid phase extraction column to maintain the main component-fuel oil in organic additves to avoid its interfering with minor compounds, other organic additves were separated and analysed by GC/Ms. In addition, the remaining active compound such as benzoyl peroxide was identified by CC/Ms, through analyzing acetone extract directly. Using the above mentioned techniques, soften agents (fuel oil, plant oil and phthalte), curing agent (benzoylperoxide), vulcanizing accelerators (2-mercaptobenzothiazole, ethyl thiuram and butyl thiuram), and antiagers (2, 6-Di-tert-butyl-4-methyl phenol and styrenated phenol) in ethylene-propylene rubber were identified. Although the technique was established in ethylene-propylene rubber system, it can be used in other rubber system.

  13. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  14. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  15. CRANE POSITIONING APPARATUS

    DOEpatents

    Landsiedel, F.W.; Wolff, H.

    1960-06-28

    An apparatus is described for automatically accomplishing the final accurate horizontal positioning of a crane after the latter has been placed to within 1/8 in. of its selected position. For this purpose there is provided a tiltable member on the crane mast for lowering into contact with a stationary probe. Misalignment of the tiltable member, with respect to the probe as the member is lowered, causes tilting of the latter to actuate appropriate switches that energize motors for bringing the mast into proper position. When properly aligned the member is not tilted and a central switch is actuated to indicate the final alignment of the crane.

  16. Additive manufacturing of hybrid circuits

    SciTech Connect

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  17. Dirty ducting poses significant risks.

    PubMed

    Norman, Richard

    2010-06-01

    Richard Norman, managing director of ventilation system cleaning specialist Indepth Hygiene, discusses the importance of ensuring that such systems are properly cleaned in healthcare facilities, especially, he argues, as dust and debris on internal surfaces of ducting are potentially "ideal nutrients" for the growth of microorganisms such as MRSA and Clostridium difficile. In addition he warns that, if not properly and regularly cleaned, grease extract ventilation systems linked to catering facilities are a potential source of danger to hospital patients, staff, and visitors alike.

  18. Significant results: statistical or clinical?

    PubMed Central

    2016-01-01

    The null hypothesis significance test method is popular in biological and medical research. Many researchers have used this method for their research without exact knowledge, though it has both merits and shortcomings. Readers will know its shortcomings, as well as several complementary or alternative methods, as such the estimated effect size and the confidence interval. PMID:27066201

  19. Status and Significance of Credentialing.

    ERIC Educational Resources Information Center

    Musgrave, Dorothea

    1984-01-01

    Discusses the current status, significance, and future of credentialing in the field of environmental health. Also discusses four phases of a Bureau of Health Professions (BHP) Credentialing Program and BHP-funded projects related to their development and implementation. Phases include role delineation, resources development, examination…

  20. Stress Management: Positive Thinking

    MedlinePlus

    ... and can even improve your health. Practice overcoming negative self-talk with examples provided. By Mayo Clinic ... head. These automatic thoughts can be positive or negative. Some of your self-talk comes from logic ...

  1. Benign positional vertigo

    MedlinePlus

    ... Clinical practice guideline: Benign paroxysmal positional vertigo. Otolaryngol Head Neck Surg . 2008;139(5 Suppl 4):S47-S81. ... BH, Lund V, et al, eds. Cummings Otolaryngology: Head & Neck Surgery . 6th ed. Philadelphia, PA: Elsevier Mosby; 2015: ...

  2. Fluorescent optical position sensor

    DOEpatents

    Weiss, Jonathan D.

    2005-11-15

    A fluorescent optical position sensor and method of operation. A small excitation source side-pumps a localized region of fluorescence at an unknown position along a fluorescent waveguide. As the fluorescent light travels down the waveguide, the intensity of fluorescent light decreases due to absorption. By measuring with one (or two) photodetectors the attenuated intensity of fluorescent light emitted from one (or both) ends of the waveguide, the position of the excitation source relative to the waveguide can be determined by comparing the measured light intensity to a calibrated response curve or mathematical model. Alternatively, excitation light can be pumped into an end of the waveguide, which generates an exponentially-decaying continuous source of fluorescent light along the length of the waveguide. The position of a photodetector oriented to view the side of the waveguide can be uniquely determined by measuring the intensity of the fluorescent light emitted radially at that location.

  3. What controls nucleosome positions?

    PubMed

    Segal, Eran; Widom, Jonathan

    2009-08-01

    The DNA of eukaryotic genomes is wrapped in nucleosomes, which strongly distort and occlude the DNA from access to most DNA-binding proteins. An understanding of the mechanisms that control nucleosome positioning along the DNA is thus essential to understanding the binding and action of proteins that carry out essential genetic functions. New genome-wide data on in vivo and in vitro nucleosome positioning greatly advance our understanding of several factors that can influence nucleosome positioning, including DNA sequence preferences, DNA methylation, histone variants and post-translational modifications, higher order chromatin structure, and the actions of transcription factors, chromatin remodelers and other DNA-binding proteins. We discuss how these factors function and ways in which they might be integrated into a unified framework that accounts for both the preservation of nucleosome positioning and the dynamic nucleosome repositioning that occur across biological conditions, cell types, developmental processes and disease.

  4. Optimal Centroid Position Estimation

    SciTech Connect

    Candy, J V; McClay, W A; Awwal, A S; Ferguson, S W

    2004-07-23

    The alignment of high energy laser beams for potential fusion experiments demand high precision and accuracy by the underlying positioning algorithms. This paper discusses the feasibility of employing online optimal position estimators in the form of model-based processors to achieve the desired results. Here we discuss the modeling, development, implementation and processing of model-based processors applied to both simulated and actual beam line data.

  5. Video image position determination

    DOEpatents

    Christensen, Wynn; Anderson, Forrest L.; Kortegaard, Birchard L.

    1991-01-01

    An optical beam position controller in which a video camera captures an image of the beam in its video frames, and conveys those images to a processing board which calculates the centroid coordinates for the image. The image coordinates are used by motor controllers and stepper motors to position the beam in a predetermined alignment. In one embodiment, system noise, used in conjunction with Bernoulli trials, yields higher resolution centroid coordinates.

  6. Global Positioning System Status

    DTIC Science & Technology

    2011-04-27

    GPS : FREE – DEPENDABLE – RELIABLE - ACCURATE 1 GLOBAL POSITIONING SYSTEM STATUS Benjamin Barbour Major, United States Air Force Schriever AFB... Global Positioning System Service Interface Committee (CGSIC) held in Groton, CT, April 2011 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY...Continuing work with international GNSS community  Maintains Backward Compatibility  Managing GPS systems and supporting stakeholders Committed to responsible stewardship of GPS

  7. Student Vocational Teachers: The Significance of Individual Positions in Workplace Learning

    ERIC Educational Resources Information Center

    Goh, Adeline Yuen Sze; Zukas, Miriam

    2016-01-01

    In most initial teacher preparation (ITP) programmes, learning in teaching placements is considered to be an important component for providing workplace learning experiences to develop the skills of being a teacher. This paper is based on a bigger qualitative study which explored the learning experiences of a group of in-service student vocational…

  8. Neuroendocrine Differentiation in Breast Cancer: Clinicopathological Significance of Bcl-2 Positive Solid Papillary Carcinoma

    PubMed Central

    Okubo, Takuji; Okubo, Yoshimi; Ishiwatari, Takao

    2016-01-01

    Solid papillary carcinoma (SPC) is considered a rare malignant breast tumor. Maluf and Koerner first reported this disease entity as a special type of ductal carcinoma in situ with several characteristic histopathological features, including low-grade cellular atypia, intracellular or extracellular mucin deposition, and solid papillary growth pattern, as well as neuroendocrine differentiation. The present paper describes a case of SPC with bcl-2 expression, which is known as a marker for malignancy of neuroendocrine tumors. Interestingly, despite bcl-2 expression being a poor prognostic indicator of neuroendocrine tumors, the patient with this tumor has achieved long-term survival (approximately 6 years) at the time of writing this report. Because previous investigators reported that bcl-2 expression might play a role in the inhibition of the development of breast cancer, we suggest that bcl-2 expression might reflect a good prognosis in patients with SPC, rather than being a poor prognostic indicator, as it is in several types of neuroendocrine tumor. However, to confirm this hypothesis, further investigation is required. PMID:28105053

  9. Developmental letter position dyslexia.

    PubMed

    Friedmann, Naama; Rahamim, Einav

    2007-09-01

    Letter position dyslexia (LPD) is a peripheral dyslexia that causes errors of letter order within words. So far, only cases of acquired LPD have been reported. This study presents selective LPD in its developmental form, via the testing of II Hebrew-speaking individuals with developmental dyslexia. The study explores the types of errors and effects on reading in this dyslexia, using a variety of tests: reading aloud, lexical decision, same-different decision, definition and letter naming. The findings indicate that individuals with developmental LPD have a deficit in the letter position encoding function of the orthographic visual analyser, which leads to underspecification of letter position within words. Letter position errors occur mainly in adjacent middle letters, when the error creates another existing word. The participants did not show an output deficit or phonemic awareness deficit. The selectivity of the deficit, causing letter position errors but no letter identity errors and no migrations between words, supports the existence of letter position encoding function as separate from letter identification and letter-to-word binding.

  10. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  11. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  12. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  13. Optimizing significance testing of astronomical forcing in cyclostratigraphy

    NASA Astrophysics Data System (ADS)

    Kemp, David B.

    2016-12-01

    The recognition of astronomically forced (Milankovitch) climate cycles in geological archives marked a major advance in Earth science, revealing a heartbeat within the climate system of general importance and key utility. Power spectral analysis is the primary tool used to facilitate identification of astronomical cycles in stratigraphic data, but commonly employed methods for testing the statistical significance of relatively high narrow-band variance of potential astronomical origin in spectra have been criticized for inadequately balancing the respective probabilities of type I (false positive) and type II (false negative) errors. This has led to suggestions that the importance of astronomical forcing in Earth history is overstated. It can be readily demonstrated, however, that the imperfect nature of the stratigraphic record and the quasiperiodicity of astronomical cycles sets an upper limit on the attainable significance of astronomical signals. Optimized significance testing is that which minimizes the combined probability of type I and type II errors. Numerical simulations of stratigraphically preserved astronomical signals suggest that optimum significance levels at which to reject a null hypothesis of no astronomical forcing are between 0.01 and 0.001 (i.e., 99-99.9% confidence level). This is lower than commonly employed in the literature (90-99% confidence levels). Nevertheless, in consonance with the emergent view from other scientific disciplines, fixed-value null hypothesis significance testing of power spectra is implicitly ill suited to demonstrating astronomical forcing, and the use of spectral analysis remains a difficult and subjective endeavor in the absence of additional supporting evidence.

  14. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  15. Quantitative analysis of EGR proteins binding to DNA: assessing additivity in both the binding site and the protein

    PubMed Central

    Liu, Jiajian; Stormo, Gary D

    2005-01-01

    Background Recognition codes for protein-DNA interactions typically assume that the interacting positions contribute additively to the binding energy. While this is known to not be precisely true, an additive model over the DNA positions can be a good approximation, at least for some proteins. Much less information is available about whether the protein positions contribute additively to the interaction. Results Using EGR zinc finger proteins, we measure the binding affinity of six different variants of the protein to each of six different variants of the consensus binding site. Both the protein and binding site variants include single and double mutations that allow us to assess how well additive models can account for the data. For each protein and DNA alone we find that additive models are good approximations, but over the combined set of data there are context effects that limit their accuracy. However, a small modification to the purely additive model, with only three additional parameters, improves the fit significantly. Conclusion The additive model holds very well for every DNA site and every protein included in this study, but clear context dependence in the interactions was detected. A simple modification to the independent model provides a better fit to the complete data. PMID:16014175

  16. Statistical Significance of Threading Scores

    PubMed Central

    Fayyaz Movaghar, Afshin; Launay, Guillaume; Schbath, Sophie; Gibrat, Jean-François

    2012-01-01

    Abstract We present a general method for assessing threading score significance. The threading score of a protein sequence, thread onto a given structure, should be compared with the threading score distribution of a random amino-acid sequence, of the same length, thread on the same structure; small p-values point significantly high scores. We claim that, due to general protein contact map properties, this reference distribution is a Weibull extreme value distribution whose parameters depend on the threading method, the structure, the length of the query and the random sequence simulation model used. These parameters can be estimated off-line with simulated sequence samples, for different sequence lengths. They can further be interpolated at the exact length of a query, enabling the quick computation of the p-value. PMID:22149633

  17. Evolution of the Significant Figure Rules

    NASA Astrophysics Data System (ADS)

    Carter, Ashley R.

    2013-09-01

    Today, almost all introductory physics textbooks include standardized "rules" on how to find the number of significant figures in a calculated value. And yet, 30 years ago these rules were almost nonexistent. Whyhave we increased the role of significant figures in introductory classes, and should we continue this trend? A look back at the evolution of significant figures over the last 300 years, from Newton to Millikan to modern authors, sheds some light on their purpose moving forward. While there is much discussion for and against their use, especially in chemistry, a review of earlier versions of the rules suggests that we have lost some items of value, most notably, a significant figure rule for angles. In addition, we have lost the emphasis that the significant figure rules were designed to calculate an approximate (not exact) precision. Now that the significant figure rules are ingrained into our introductory physics sequence, we would be wise to reiterate that these are just general "rules of thumb."

  18. The Variable Transition State in Polar Additions to Pi Bonds

    ERIC Educational Resources Information Center

    Weiss, Hilton M.

    2010-01-01

    A vast majority of polar additions of Bronsted acids to alkynes involve a termolecular transition state. With strong acids, considerable positive charge is developed on carbon and Markovnikov addition predominates. In less acidic solutions, however, the reaction is much slower and the transition state more closely resembles the olefinic product.…

  19. Position sense asymmetry.

    PubMed

    Adamo, Diane E; Martin, Bernard J

    2009-01-01

    Asymmetries in upper limb position sense have been explained in the context of a left limb advantage derived from differences in hemispheric specialization in the processing of kinesthetic information. However, it is not clearly understood how the comparison of perceptual information associated with passive limb displacement and the corresponding matching movement resulting from the execution of a motor command contributes to these differences. In the present study, upper limb position sense was investigated in 12 right-hand-dominant young adults performing wrist position matching tasks which varied in terms of interhemispheric transfer, memory retrieval and whether the reference position was provided by the same or opposite limb. Right and left hand absolute matching errors were similar when the reference and matching positions were produced by the same hand but were 36% greater when matching the reference position with the opposite hand. When examining the constant errors generated from matching movements made with the same hand that provided the reference, the right and left hand matching errors (approximately 3 degrees) were similar. However, when matching with the opposite limb, a large overshoot (P < 0.05) characterized the error when the right hand matched the left hand reference while a large undershoot (P < 0.05) characterized the error when the left hand matched the right hand reference. The overshoot and undershoot were of similar magnitude (approximately 4 degrees). Although asymmetries in the central processing of proprioceptive information such as interhemispheric transfer may exist, the present study suggests that asymmetries in position sense predominantly result from a difference in the "gain of the respective proprioceptive sensory-motor loops". This new hypothesis is strongly supported by a dual-linear model representing the right and left hand sensory-motor systems as well as morphological and physiological data.

  20. Position Sensor Integral with a Linear Actuator

    NASA Technical Reports Server (NTRS)

    Howard, David E.; Alhorn, Dean C.

    2004-01-01

    A noncontact position sensor has been designed for use with a specific two-dimensional linear electromagnetic actuator. To minimize the bulk and weight added by the sensor, the sensor has been made an integral part of the actuator: that is to say, parts of the actuator structure and circuitry are used for sensing as well as for varying position. The actuator (see Figure 1) includes a C-shaped permanent magnet and an armature that is approximately centered in the magnet gap. The intended function of the actuator is to cause the permanent magnet to translate to, and/or remain at, commanded x and y coordinates, relative to the armature. In addition, some incidental relative motion along the z axis is tolerated but not controlled. The sensor is required to measure the x and y displacements from a nominal central position and to be relatively insensitive to z displacement. The armature contains two sets of electromagnet windings oriented perpendicularly to each other and electrically excited in such a manner as to generate forces in the x,y plane to produce the required motion. Small sensor excitation coils are mounted on the pole tips of the permanent magnet. These coils are excited with a sine wave at a frequency of 20 kHz. This excitation is transformer-coupled to the armature windings. The geometric arrangement of the excitation coils and armature windings is such that the amplitudes of the 20-kHz voltages induced in the armature windings vary nearly linearly with x and y displacements and do not vary significantly with small z displacements. Because the frequency of 20 kHz is much greater than the maximum frequency characteristic of the actuation signals applied to the armature windings, there is no appreciable interference between actuator and sensor functions of the armature windings.

  1. Significance of cocaine history in schizophrenia.

    PubMed

    Sevy, S; Kay, S R; Opler, L A; van Praag, H M

    1990-10-01

    Fifty-one schizophrenic inpatients were divided into two groups, those with and without history of cocaine use, and compared on historical, demographic, cognitive, and psychopathological measures. Patients with a cocaine history were found to be significantly more depressed, less socialized, and more impaired in conceptual encoding and verbal memory, while less disordered in attention. The two groups did not differ in severity of illness or positive and negative syndromes. There were also no differences in control variables such as age, gender, education, intelligence, premorbid adjustment, neuroleptic dose, onset and chronicity of illness, continuity of hospitalization, paranoid subtype, and psychiatric illness in the family. Cocaine history was associated with multiple illicit drug use, but for other substances there was no increased liability for depression or cognitive deficits. The results suggest that the clinical presentation in schizophrenia is significantly associated with prior cocaine experience.

  2. Materials as additives for advanced lubrication

    DOEpatents

    Pol, Vilas G.; Thackeray, Michael M.; Mistry, Kuldeep; Erdemir, Ali

    2016-09-13

    This invention relates to carbon-based materials as anti-friction and anti-wear additives for advanced lubrication purposes. The materials comprise carbon nanotubes suspended in a liquid hydrocarbon carrier. Optionally, the compositions further comprise a surfactant (e.g., to aid in dispersion of the carbon particles). Specifically, the novel lubricants have the ability to significantly lower friction and wear, which translates into improved fuel economies and longer durability of mechanical devices and engines.

  3. Testing for Additivity at Select Mixture Groups of Interest Based on Statistical Equivalence Testing Methods

    SciTech Connect

    Stork, LeAnna M.; Gennings, Chris; Carchman, Richard; Carter, Jr., Walter H.; Pounds, Joel G.; Mumtaz, Moiz

    2006-12-01

    Several assumptions, defined and undefined, are used in the toxicity assessment of chemical mixtures. In scientific practice mixture components in the low-dose region, particularly subthreshold doses, are often assumed to behave additively (i.e., zero interaction) based on heuristic arguments. This assumption has important implications in the practice of risk assessment, but has not been experimentally tested. We have developed methodology to test for additivity in the sense of Berenbaum (Advances in Cancer Research, 1981), based on the statistical equivalence testing literature where the null hypothesis of interaction is rejected for the alternative hypothesis of additivity when data support the claim. The implication of this approach is that conclusions of additivity are made with a false positive rate controlled by the experimenter. The claim of additivity is based on prespecified additivity margins, which are chosen using expert biological judgment such that small deviations from additivity, which are not considered to be biologically important, are not statistically significant. This approach is in contrast to the usual hypothesis-testing framework that assumes additivity in the null hypothesis and rejects when there is significant evidence of interaction. In this scenario, failure to reject may be due to lack of statistical power making the claim of additivity problematic. The proposed method is illustrated in a mixture of five organophosphorus pesticides that were experimentally evaluated alone and at relevant mixing ratios. Motor activity was assessed in adult male rats following acute exposure. Four low-dose mixture groups were evaluated. Evidence of additivity is found in three of the four low-dose mixture groups.The proposed method tests for additivity of the whole mixture and does not take into account subset interactions (e.g., synergistic, antagonistic) that may have occurred and cancelled each other out.

  4. Beyond Positive Psychology?

    PubMed Central

    McNulty, James K.; Fincham, Frank D.

    2014-01-01

    The field of positive psychology rests on the assumption that certain psychological traits and processes are inherently beneficial for well-being. We review evidence that challenges this assumption. First, we review data from 4 independent longitudinal studies of marriage revealing that 4 ostensibly positive processes—forgiveness, optimistic expectations, positive thoughts, and kindness—can either benefit or harm well-being depending on the context in which they operate. Although all 4 processes predicted better relationship well-being among spouses in healthy marriages, they predicted worse relationship well-being in more troubled marriages. Then, we review evidence from other research that reveals that whether ostensibly positive psychological traits and processes benefit or harm well-being depends on the context of various noninterpersonal domains as well. Finally, we conclude by arguing that any movement to promote well-being may be most successful to the extent that it (a) examines the conditions under which the same traits and processes may promote versus threaten well-being, (b) examines both healthy and unhealthy people, (c) examines well-being over substantial periods of time, and (d) avoids labeling psychological traits and processes as positive or negative. PMID:21787036

  5. Local positioning system

    SciTech Connect

    Kyker, R.

    1995-07-25

    Navigation systems have been vital to transportation ever since man took to the air and sea. Early navigation systems utilized the sextant to navigate by starlight as well as the magnetic needle compass. As electronics and communication technologies improved, inertial navigation systems were developed for use in ships and missile delivery. These systems consisted of electronic compasses, gyro-compasses, accelerometers, and various other sensors. Recently, systems such as LORAN and the Global Positioning System (GPS) have utilized the properties of radio wave propagation to triangulate position. The Local Positioning System (LPS), described in this paper, is an implementation of a limited inertial navigation system designed to be used on a bicycle. LPS displays a cyclist`s current position relative to a starting location. This information is displayed in Cartesian-like coordinates. To accomplish this, LPS relies upon two sensors, an electronic compass sensor and a distance sensor. The compass sensor provides directional information while the distance sensor provides the distance traveled. This information yields a distance vector for each point in time which when summed produces the cyclist`s current position. LPS is microprocessor controlled and is designed for a range of less than 90 miles.

  6. The Frontiers of Additive Manufacturing

    SciTech Connect

    Grote, Christopher John

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  7. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  8. Body position affects performance in untrained cyclists

    PubMed Central

    Ashe, M; Scroop, G; Frisken, P; Amery, C; Wilkins, M; Khan, K

    2003-01-01

    Objective: To compare cardiovascular and ventilatory variables in upright versus aero cycle ergometry at submaximal and maximal exercise intensities in untrained cyclists. Method: Ten physically active men (mean (SD) age 19.1 (1.10) years) who were unfamiliar with aerobars underwent maximal exercise testing and steady state cycling at 50, 100, and 150 W. Results: Participants had significantly greater maxima for oxygen uptake (VO2), ventilation, heart rate, and workload maximum in the upright position. During steady state cycling at the three workloads, VO2 (ml/kg/min) and gross mechanical efficiency were significantly greater in the upright position. Conclusions: In untrained subjects performing with maximal effort, the upright position permits greater VO2, ventilation, heart rate, and workload maxima. Further, in the steady state, exercise cycling may be less costly in the upright position. For this reason, untrained cyclists need to weigh body position effects against the well known aerodynamic advantages of the aero position. PMID:14514538

  9. Additive Manufacturing Integrated Energy Demonstration

    SciTech Connect

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-02-05

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  10. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  11. Additive Manufacturing Integrated Energy Demonstration

    ScienceCinema

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-07-12

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  12. Nanoengineered Additives for Active Coatings

    DTIC Science & Technology

    2007-04-01

    commercial ad bial activ component from the coating, leading to eventual depletion of the film. Small TPU samples were evaluated using a Kirby - Bauer ...7 Table 5. Summary of 24-hr ASTM E 2180 tests with 1 weight-percent additive in PUr (solvent dispersible) based on 6-log loading of...Noveon X-1150). The ASTM E 2180 test is run in triplicate (Note that alternative ro 1° amines) was suspended in dry tetrahydrofuran (THF) (150 mL) in

  13. Clinically significant drug interactions with atypical antipsychotics.

    PubMed

    Kennedy, William Klugh; Jann, Michael W; Kutscher, Eric C

    2013-12-01

    Atypical antipsychotics [also known as second-generation antipsychotics (SGAs)] have become a mainstay therapeutic treatment intervention for patients with schizophrenia, bipolar disorders and other psychotic conditions. These agents are commonly used with other medications--most notably, antidepressants and antiepileptic drugs. Drug interactions can take place by various pharmacokinetic, pharmacodynamic and pharmaceutical mechanisms. The pharmacokinetic profile of each SGA, especially with phase I and phase II metabolism, can allow for potentially significant drug interactions. Pharmacodynamic interactions arise when agents have comparable receptor site activity, which can lead to additive or competitive effects without alterations in measured plasma drug concentrations. Additionally, the role of drug transporters in drug interactions continues to evolve and may effect both pharmacokinetic and pharmacodynamic interactions. Pharmaceutical interactions occur when physical incompatibilities take place between agents prior to drug absorption. Approximate therapeutic plasma concentration ranges have been suggested for a number of SGAs. Drug interactions that markedly increase or decrease the concentrations of these agents beyond their ranges can lead to adverse events or diminished clinical efficacy. Most clinically significant drug interactions with SGAs occur via the cytochrome P450 (CYP) system. Many but not all drug interactions with SGAs are identified during drug discovery and pre-clinical development by employing a series of standardized in vitro and in vivo studies with known CYP inducers and inhibitors. Later therapeutic drug monitoring programmes, clinical studies and case reports offer methods to identify additional clinically significant drug interactions. Some commonly co-administered drugs with a significant potential for drug-drug interactions with selected SGAs include some SSRIs. Antiepileptic mood stabilizers such as carbamazepine and valproate, as

  14. Reversible Oxidative Addition at Carbon.

    PubMed

    Eichhorn, Antonius F; Fuchs, Sonja; Flock, Marco; Marder, Todd B; Radius, Udo

    2017-04-07

    The reactivity of N-heterocyclic carbenes (NHCs) and cyclic alkyl amino carbenes (cAACs) with arylboronate esters is reported. The reaction with NHCs leads to the reversible formation of thermally stable Lewis acid/base adducts Ar-B(OR)2 ⋅NHC (Add1-Add6). Addition of cAAC(Me) to the catecholboronate esters 4-R-C6 H4 -Bcat (R=Me, OMe) also afforded the adducts 4-R-C6 H4 Bcat⋅cAAC(Me) (Add7, R=Me and Add8, R=OMe), which react further at room temperature to give the cAAC(Me) ring-expanded products RER1 and RER2. The boronate esters Ar-B(OR)2 of pinacol, neopentylglycol, and ethyleneglycol react with cAAC at RT via reversible B-C oxidative addition to the carbene carbon atom to afford cAAC(Me) (B{OR}2 )(Ar) (BCA1-BCA6). NMR studies of cAAC(Me) (Bneop)(4-Me-C6 H4 ) (BCA4) demonstrate the reversible nature of this oxidative addition process.

  15. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; ...

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  16. Food additives and contaminants. An update.

    PubMed

    Newberne, P M; Conner, M W

    1986-10-15

    Food additives continue to be a source of benefits to the consuming public but there are also perceived risks. Concern for the latter in the last decade has produced a society afflicted with cancer phobia. The intentional additives including sugars, salt, corn syrup, and dextrose make up 90% of the direct additives. These, along with a limited number of familiar items make up a large proportion of the remainder of the additives. Such common ingredients as nitrates and nitrites, solanine, cyanogenetic compounds, arsenic, etc., are unavoidably consumed in the diet and with little if any evidence for public health consequences. Major concern on the part of the public in recent years has been focused on man-made chemicals which are intentionally added to foods to enhance flavors and acceptability, nutrient value, shelf life and increased availability. These include food colors, nonnutritive and low-nutrient sweeteners, (saccharin, cyclamate, aspartame); antioxidants; and nitrites. Contaminants, sometimes incorrectly included in lists of food additives, present the greatest potential threat to public health. Such contaminants as mycotoxins, nitrosamines, polychlorinated biphenyls (PCBs), pesticides, among others, provide a continuing challenge to our regulatory agencies and to public health authorities. Evidence to date indicate that these responsible for food safety are doing an admirable job, and as a society, our food supply has never been better, or safer, and, as a population, we have never been healthier. Aside from contaminants, major concerns relate to an excess of good food and to obesity. These comments should not be taken to infer that we should relax our concern and surveillance; instead more concern and surveillance should be exerted toward those uncontrolled substances such as natural plant products and alleged natural nutrients, roots, herbs, etc., which are given much credit for positive health effects, without meeting the high standards of our

  17. PSD Significance Levels for Monitoring

    EPA Pesticide Factsheets

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  18. Where boosted significances come from

    NASA Astrophysics Data System (ADS)

    Plehn, Tilman; Schichtel, Peter; Wiegand, Daniel

    2014-03-01

    In an era of increasingly advanced experimental analysis techniques it is crucial to understand which phase space regions contribute a signal extraction from backgrounds. Based on the Neyman-Pearson lemma we compute the maximum significance for a signal extraction as an integral over phase space regions. We then study to what degree boosted Higgs strategies benefit ZH and tt¯H searches and which transverse momenta of the Higgs are most promising. We find that Higgs and top taggers are the appropriate tools, but would profit from a targeted optimization towards smaller transverse momenta. MadMax is available as an add-on to MadGraph 5.

  19. Turbine nozzle positioning system

    DOEpatents

    Norton, Paul F.; Shaffer, James E.

    1996-01-30

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine.

  20. Turbine nozzle positioning system

    DOEpatents

    Norton, P.F.; Shaffer, J.E.

    1996-01-30

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine. 9 figs.

  1. Taking a Position

    NASA Technical Reports Server (NTRS)

    1999-01-01

    "TerrAvoid" and "Position Integrity" combine Global Positioning Satellite (GPS) data with high-resolution maps of the Earth's topography. Dubbs & Severino, Inc., based in Irvine, California, has developed software that allows the system to be run on a battery-powered laptop in the cockpit. The packages, designed primarily for military sponsors and now positioned to hit the consumer market in coming months, came about as the result of the Jet Propulsion Laboratory's Technology Affiliates Program. Intended to give American industry assistance from NASA experts and to facilitate business use of intellectual property developed for the space program, the Technology Affiliates Program introduced the start-up company of Dubbs & Severino to JPL's Dr. Nevin Bryant four years ago. GeoTIFF is now in the public domain, and its use for commercial product development has evolved into an industry standard over the last year.

  2. Uncharged positive electrode composition

    DOEpatents

    Kaun, Thomas D.; Vissers, Donald R.; Shimotake, Hiroshi

    1977-03-08

    An uncharged positive-electrode composition contains particulate lithium sulfide, another alkali metal or alkaline earth metal compound other than sulfide, e.g., lithium carbide, and a transition metal powder. The composition along with a binder, such as electrolytic salt or a thermosetting resin is applied onto an electrically conductive substrate to form a plaque. The plaque is assembled as a positive electrode within an electrochemical cell opposite to a negative electrode containing a material such as aluminum or silicon for alloying with lithium. During charging, lithium alloy is formed within the negative electrode and transition metal sulfide such as iron sulfide is produced within the positive electrode. Excess negative electrode capacity over that from the transition metal sulfide is provided due to the electrochemical reaction of the other than sulfide alkali metal or alkaline earth metal compound.

  3. Spirit Wiggles into Position

    NASA Technical Reports Server (NTRS)

    2005-01-01

    NASA's Mars Exploration Rover Spirit completed a difficult, rocky ascent en route to reaching a captivating rock outcrop nicknamed 'Hillary' at the summit of 'Husband Hill.' At the end of the climb the robotic geologist was tilted almost 30 degrees. To get the rover on more solid footing for deploying the instrument arm, rover drivers told Spirit to wiggle its wheels one at a time. This animation shows Spirit's position before and after completing the wheel wiggle, during which the rover slid approximately 1 centimeter (0.4 inch) downhill. Rover drivers decided this position was too hazardous for deploying the instrument arm and subsequently directed Spirit to a more stable position before conducting analyses with instruments on the rover's arm.

    Spirit took these images with its front hazard-avoidance camera on martian day, or sol, 625 (Oct. 6, 2005).

  4. Application of Additional Secondary Factors to LORAN-C Positions for Hydrographic Operations

    DTIC Science & Technology

    1982-10-01

    by Gerald E. Wheaton October 1982 Thesis Advisor: Gerald B. Mills LJJ Approved for public release; distribution unlimieed 8 ~ 03 4 0 4 0 E SECURITY...Areas in Monterey Bay ..... 4 8 ° I. ITIO _UION A. USE OF LORAN-C In recent years there has been in increasing usage of a LORAN-C receiver and the...electrical properties nf soil are those of Smith-Rose ( 1934] and Pressey, Ashwell, and Fowler (1956]. Smith-Rose (1934] found that the conduc- I. tivities

  5. The Beneficial Effects of Additional Task Load, Positive Affect, and Instruction on the Attentional Blink

    ERIC Educational Resources Information Center

    Olivers, Christian N. L.; Nieuwenhuis, Sander

    2006-01-01

    The attentional blink reflects the impaired ability to identify the 2nd of 2 targets presented in close succession--a phenomenon that is generally thought to reflect a fundamental cognitive limitation. However, the fundamental nature of this impairment has recently been called into question by the counterintuitive finding that task-irrelevant…

  6. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  7. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  8. Public health significance of neuroticism.

    PubMed

    Lahey, Benjamin B

    2009-01-01

    The personality trait of neuroticism refers to relatively stable tendencies to respond with negative emotions to threat, frustration, or loss. Individuals in the population vary markedly on this trait, ranging from frequent and intense emotional reactions to minor challenges to little emotional reaction even in the face of significant difficulties. Although not widely appreciated, there is growing evidence that neuroticism is a psychological trait of profound public health significance. Neuroticism is a robust correlate and predictor of many different mental and physical disorders, comorbidity among them, and the frequency of mental and general health service use. Indeed, neuroticism apparently is a predictor of the quality and longevity of our lives. Achieving a full understanding of the nature and origins of neuroticism, and the mechanisms through which neuroticism is linked to mental and physical disorders, should be a top priority for research. Knowing why neuroticism predicts such a wide variety of seemingly diverse outcomes should lead to improved understanding of commonalities among those outcomes and improved strategies for preventing them.

  9. Significance of biofilms in dentistry.

    PubMed

    Wróblewska, Marta; Strużycka, Izabela; Mierzwińska-Nastalska, Elżbieta

    2015-01-01

    In the past decades significant scientific progress has taken place in the knowledge about biofilms. They constitute multilayer conglomerates of bacteria and fungi, surrounded by carbohydrates which they produce, as well as substances derived from saliva and gingival fluid. Modern techniques showed significant diversity of the biofilm environment and a system of microbial communication (quorum sensing), enhancing their survival. At present it is believed that the majority of infections, particularly chronic with exacerbations, are a result of biofilm formation, particularly in the presence of biomaterials. It should be emphasised that penetration of antibiotics and other antimicrobial agents into deeper layers of a biofilm is poor, causing therapeutic problems and necessitating sometimes removal of the implant or prosthesis. Biofilms play an increasing role in dentistry as a result of more and more broad use in dental practice of plastic and implantable materials. Biofilms are produced on the surfaces of teeth as dental plaque, in the para-nasal sinuses, on prostheses, dental implants, as well as in waterlines of a dental unit, constituting a particular risk for severely immunocompromised patients. New methods of therapy and prevention of infections linked to biofilms are under development.

  10. Benign paroxysmal positional vertigo.

    PubMed

    von Brevern, Michael

    2013-07-01

    Benign paroxysmal positional vertigo (BPPV) is the most common and the most effectively treated vestibular disorder. The prevailing pathomechanism is canalolithiasis, which is otoconia falling in one of the semicircular canals where they move in response to changes of the head position, triggering excitation of the vestibular receptors of the affected canal. In the majority of patients with BPPV, the posterior canal is affected by canalolithiasis and there are two highly effective therapeutic maneuvers for treatment. About 20% of patients present with lithiasis of the horizontal or anterior canal. The author focuses on recent advances in diagnosis and treatment of the more rare variants of BPPV.

  11. Nucleosome Positioning and Epigenetics

    NASA Astrophysics Data System (ADS)

    Schwab, David; Bruinsma, Robijn

    2008-03-01

    The role of chromatin structure in gene regulation has recently taken center stage in the field of epigenetics, phenomena that change the phenotype without changing the DNA sequence. Recent work has also shown that nucleosomes, a complex of DNA wrapped around a histone octamer, experience a sequence dependent energy landscape due to the variation in DNA bend stiffness with sequence composition. In this talk, we consider the role nucleosome positioning might play in the formation of heterochromatin, a compact form of DNA generically responsible for gene silencing. In particular, we discuss how different patterns of nucleosome positions, periodic or random, could either facilitate or suppress heterochromatin stability and formation.

  12. Position paper update.

    PubMed

    2007-08-01

    In May 2007, the Board of Trustees of the American Academy of Periodontology rescinded the following position papers: "Periodontal Considerations in the HIV Positive Patient" (1994). "Periodontal Considerations in the Management of the Cancer Patient" (1997). "Periodontal Management of Patients With Cardiovascular Diseases" (2002). "The Potential Role of Growth and Differentiation Factors in Periodontal Regeneration" (1996). "Sonic and Ultrasonic Scalers in Periodontics" (2000). These papers have been removed from the AAP Web and online Journal sites. Readers are encouraged to consult the literature for the most current information on these topics.

  13. Positive lightning and severe weather

    NASA Astrophysics Data System (ADS)

    Price, C.; Murphy, B.

    2003-04-01

    In recent years researchers have noticed that severe weather (tornados, hail and damaging winds) are closely related to the amount of positive lightning occurring in thunderstorms. On 4 July 1999, a severe derecho (wind storm) caused extensive damage to forested regions along the United States/Canada border, west of Lake Superior. There were 665,000 acres of forest destroyed in the Boundary Waters Canoe Area Wilderness (BWCAW) in Minnesota and Quetico Provincial Park in Canada, with approximately 12.5 million trees blown down. This storm resulted in additional severe weather before and after the occurrence of the derecho, with continuous cloud-to-ground (CG) lightning occurring for more than 34 hours during its path across North America. At the time of the derecho the percentage of positive cloud-to-ground (+CG) lightning measured by the Canadian Lightning Detection Network (CLDN) was greater than 70% for more than three hours, with peak values reaching 97% positive CG lightning. Such high ratios of +CG are rare, and may be useful indicators for short-term forecasts of severe weather.

  14. Prognostic significance of renal vascular pathology in lupus nephritis.

    PubMed

    Mejía-Vilet, J M; Córdova-Sánchez, B M; Uribe-Uribe, N O; Correa-Rotter, R; Morales-Buenrostro, L E

    2017-01-01

    We performed a retrospective cohort analysis to define the prognostic significance of vascular lesions documented in renal biopsies of lupus nephritis patients. A total of 429 patients were segregated into five groups: (1) no vascular lesions (NVL), (2) arterial sclerosis (AS), (3) non-inflammatory necrotizing vasculitis (NNV), (4) thrombotic microangiopathy (TMA), and (5) true renal vasculitis (TRV). Renal outcomes were analyzed by Cox regression models, and correlations between vascular lesions and activity/chronicity scores were determined by Spearman's coefficients. A total of 200 (46.6%) had NVL, 189 (44.0%) AS, six NNV (1.4%), 23 (5.4%) TMA, and 11 (2.6%) TRV. Patients with NVL were younger, with higher renal function; patients with TMA and TRV had lower renal function and higher arterial pressure at baseline. Antiphospholipid syndrome and positive lupus anticoagulant were more frequently observed in the TMA group. Five-year renal survival was 83% for NVL, 63% for AS, 67% for NNV, 31% for TMA, and 33% for TRV. NNV and TRV were significantly correlated with activity scores, while AS and chronic TMA were correlated with chronicity scores. Renal vascular lesions are associated with renal outcomes but do not behave as independent factors. The addition of vascular lesions to currently used scores should be further explored.

  15. Social significance of community structure: Statistical view

    NASA Astrophysics Data System (ADS)

    Li, Hui-Jia; Daniels, Jasmine J.

    2015-01-01

    Community structure analysis is a powerful tool for social networks that can simplify their topological and functional analysis considerably. However, since community detection methods have random factors and real social networks obtained from complex systems always contain error edges, evaluating the significance of a partitioned community structure is an urgent and important question. In this paper, integrating the specific characteristics of real society, we present a framework to analyze the significance of a social community. The dynamics of social interactions are modeled by identifying social leaders and corresponding hierarchical structures. Instead of a direct comparison with the average outcome of a random model, we compute the similarity of a given node with the leader by the number of common neighbors. To determine the membership vector, an efficient community detection algorithm is proposed based on the position of the nodes and their corresponding leaders. Then, using a log-likelihood score, the tightness of the community can be derived. Based on the distribution of community tightness, we establish a connection between p -value theory and network analysis, and then we obtain a significance measure of statistical form . Finally, the framework is applied to both benchmark networks and real social networks. Experimental results show that our work can be used in many fields, such as determining the optimal number of communities, analyzing the social significance of a given community, comparing the performance among various algorithms, etc.

  16. Social significance of community structure: statistical view.

    PubMed

    Li, Hui-Jia; Daniels, Jasmine J

    2015-01-01

    Community structure analysis is a powerful tool for social networks that can simplify their topological and functional analysis considerably. However, since community detection methods have random factors and real social networks obtained from complex systems always contain error edges, evaluating the significance of a partitioned community structure is an urgent and important question. In this paper, integrating the specific characteristics of real society, we present a framework to analyze the significance of a social community. The dynamics of social interactions are modeled by identifying social leaders and corresponding hierarchical structures. Instead of a direct comparison with the average outcome of a random model, we compute the similarity of a given node with the leader by the number of common neighbors. To determine the membership vector, an efficient community detection algorithm is proposed based on the position of the nodes and their corresponding leaders. Then, using a log-likelihood score, the tightness of the community can be derived. Based on the distribution of community tightness, we establish a connection between p-value theory and network analysis, and then we obtain a significance measure of statistical form . Finally, the framework is applied to both benchmark networks and real social networks. Experimental results show that our work can be used in many fields, such as determining the optimal number of communities, analyzing the social significance of a given community, comparing the performance among various algorithms, etc.

  17. Additive Manufacturing of Biomaterials, Tissues, and Organs.

    PubMed

    Zadpoor, Amir A; Malda, Jos

    2017-01-01

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further development of patient-specific healthcare solutions. Customization of many healthcare products and services, such as implants, drug delivery devices, medical instruments, prosthetics, and in vitro models, would have been extremely challenging-if not impossible-without AM technologies. The current special issue of the Annals of Biomedical Engineering presents the latest trends in application of AM techniques to healthcare-related areas of research. As a prelude to this special issue, we review here the most important areas of biomedical research and clinical practice that have benefited from recent developments in additive manufacturing techniques. This editorial, therefore, aims to sketch the research landscape within which the other contributions of the special issue can be better understood and positioned. In what follows, we briefly review the application of additive manufacturing techniques in studies addressing biomaterials, (re)generation of tissues and organs, disease models, drug delivery systems, implants, medical instruments, prosthetics, orthotics, and AM objects used for medical visualization and communication.

  18. Bond additivity corrections for quantum chemistry methods

    SciTech Connect

    C. F. Melius; M. D. Allendorf

    1999-04-01

    In the 1980's, the authors developed a bond-additivity correction procedure for quantum chemical calculations called BAC-MP4, which has proven reliable in calculating the thermochemical properties of molecular species, including radicals as well as stable closed-shell species. New Bond Additivity Correction (BAC) methods have been developed for the G2 method, BAC-G2, as well as for a hybrid DFT/MP2 method, BAC-Hybrid. These BAC methods use a new form of BAC corrections, involving atomic, molecular, and bond-wise additive terms. These terms enable one to treat positive and negative ions as well as neutrals. The BAC-G2 method reduces errors in the G2 method due to nearest-neighbor bonds. The parameters within the BAC-G2 method only depend on atom types. Thus the BAC-G2 method can be used to determine the parameters needed by BAC methods involving lower levels of theory, such as BAC-Hybrid and BAC-MP4. The BAC-Hybrid method should scale well for large molecules. The BAC-Hybrid method uses the differences between the DFT and MP2 as an indicator of the method's accuracy, while the BAC-G2 method uses its internal methods (G1 and G2MP2) to provide an indicator of its accuracy. Indications of the average error as well as worst cases are provided for each of the BAC methods.

  19. Pathological Significance of Mitochondrial Glycation

    PubMed Central

    Pun, Pamela Boon Li; Murphy, Michael P.

    2012-01-01

    Glycation, the nonenzymatic glycosylation of biomolecules, is commonly observed in diabetes and ageing. Reactive dicarbonyl species such as methylglyoxal and glyoxal are thought to be major physiological precursors of glycation. Because these dicarbonyls tend to be formed intracellularly, the levels of advanced glycation end products on cellular proteins are higher than on extracellular ones. The formation of glycation adducts within cells can have severe functional consequences such as inhibition of protein activity and promotion of DNA mutations. Although several lines of evidence suggest that there are specific mitochondrial targets of glycation, and mitochondrial dysfunction itself has been implicated in disease and ageing, it is unclear if glycation of biomolecules specifically within mitochondria induces dysfunction and contributes to disease pathology. We discuss here the possibility that mitochondrial glycation contributes to disease, focussing on diabetes, ageing, cancer, and neurodegeneration, and highlight the current limitations in our understanding of the pathological significance of mitochondrial glycation. PMID:22778743

  20. [Hypertriglyceridemia: concept and clinical significance].

    PubMed

    Hirano, Tsutomu

    2013-09-01

    Hypertriglyceridemia is a common lipid disorder as well as hypercholesterolemia. However clinical significance of hypertriglyceridemia is not fully understood because of its heterogeneous lipoprotein phenotypes and complex etiology. Severe hypertriglyceridemia increases the risk for pancreatitis, whereas mild or moderate hypertriglyceridemia may be a risk factor for cardiovascular disease. Patients with hypertriglyceridemia are usually accompanied by other cardiovascular related disorders, such as central obesity, type 2 diabetes, and liver steatosis. Ectopic fat accumulation is often seen in hypertriglyceridemic subjects and various organ injuries are developed by the lipotoxicity. Hypertriglyceridemia is strongly associated with remnant lipoprotein accumulation, increased small dense LDL, and low HDL-cholesterol. All these lipid abnormalities are recognized as cardiovascular risk factors. The pathophysiology of lipoprotein metabolism related to the hypertriglyceridemia is summarized in this brief review.

  1. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  2. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  3. Theatre fleet's vital additional capacity.

    PubMed

    2012-11-01

    Vanguard Healthcare's fleet of mobile surgical facilities has been deployed to healthcare sites throughout Europe and beyond for over a decade, providing vital additional clinical capacity when existing buildings are refurbished or upgraded, in the event of flood or fire, or simply to help hospitals cater for rising demand. It is a combination of careful planning, teamwork, and the specialist expertise of Vanguard's personnel--many with a clinical background--that ensures not only each unit's successful installation, but equally its subsequent running, servicing, and maintenance, the company explains.

  4. Shale JP-4 Additive Evaluation

    DTIC Science & Technology

    1986-10-01

    8217. •% . , ’ ,,,r ,% . -- - ,.-. ’ ’ 4,w% %’. " - ,’ . . . * ’, .* . TABLE OF CONTENTS .4q ,4 . * SECTION PAGE I. INTRODUCTION 1 II. TEST PARAMETERS 2 1...42 PRECEDING PAGE BLANK TABLE OF CONTENTS (CON’T) SECT ION PAGE V. CONCLUSIONS 44 REFERENCES 46 APPENDIX A Drum to Test Sample Relationship 47 APPENDIX...B.O.C.L.E. Results 40 vii LIST OF TABLES TABLE PAGE 1 Antioxidants 3 2 Raw Shale/Petroleum Fuel Properties 10 3 Drum Sample Additive Content 13 4

  5. Immunizations. Position Statement. Revised

    ERIC Educational Resources Information Center

    Bobo, Nichole; Garrett, Jennifer; Teskey, Carmen; Duncan, Kay; Strasser, Kathy; Burrows-Mezu, Alicia L.

    2015-01-01

    It is the position of the National Association of School Nurses (NASN) that immunizations are essential to primary prevention of disease from infancy through adulthood. Promotion of immunizations by the registered professional school nurse (hereinafter referred to as school nurse) is central to the public health focus of school nursing practice…

  6. Delegation. Position Statement. Revised

    ERIC Educational Resources Information Center

    Board, Connie; Bushmiaer, Margo; Davis-Alldritt, Linda; Fekaris, Nina; Morgitan, Judith; Murphy, M. Kathleen; Yow, Barbara

    2010-01-01

    It is the position of the National Association of School Nurses (NASN) that the delegation of nursing tasks in the school setting can be a valuable tool for the school nurse, when based on the nursing definition of delegation and in compliance with state nursing regulations and guidance. Delegation in school nursing is a complex process in which…

  7. Review of HRP Positions

    SciTech Connect

    Center for Reliability Studies

    2007-01-01

    The Department of Energy (DOE) Human Reliability Program (HRP), published as 10 CFR Part 712, is currently being reviewed and revised to address concerns identified during its implementation. Although these ''page changes'' primarily incorporate clarification of terms and language, the following discussion relates to broadening the definition of positions that require HRP certification that is found in {section}712.10.

  8. Creating Positive Task Constraints

    ERIC Educational Resources Information Center

    Mally, Kristi K.

    2006-01-01

    Constraints are characteristics of the individual, the task, or the environment that mold and shape movement choices and performances. Constraints can be positive--encouraging proficient movements or negative--discouraging movement or promoting ineffective movements. Physical educators must analyze, evaluate, and determine the effect various…

  9. Nursing Research: Position Statement.

    ERIC Educational Resources Information Center

    Copp, Laurel; And Others

    The role of the American Association of Colleges of Nursing (AACN) in encouraging research through the programs and activities of the member schools is discussed. It is suggested that the dean or administrative head of a college of nursing is in a position to influence nursing research activities. The principal role of the academic dean in…

  10. Positioning for Competition.

    ERIC Educational Resources Information Center

    Lapovsky, Lucie; Hubbell, Loren Loomis

    2000-01-01

    Analyzes results of the 1999 National Association of College and Business Officers tuition discounting survey and identifies trends. Finds colleges and universities are reactively responding to market pressures and proactively trying to analyze and position themselves ahead of the competition, often regional rather than national, for the…

  11. Magnetic beam position monitor

    SciTech Connect

    Varfolomeev, A.A.; Ivanchenkov, S.N.; Khlebnikov, A.S.

    1995-12-31

    Many nondestructive beam position monitors are known. However, these devices can not be used for DC particle beam diagnostics. We investigated a method of beam diagnostics applicable for the operative control of DC high power e-beam inside closed waveguide. A design of the detector for determination of{open_quote} center of mass {close_quote} position of DC particle beam was developed. It was shown that the monitor can be used as a nondestructive method for the beam position control in resonators. Magnetic field of the particle beam outside a resonator is used. The detector consists of the steel yokes and magnetic field sensors. The sensors measure magnetic fluxes in the steel yokes fixed outside the resonator. When the particle beam changes its position, these magnetic fluxes also change. Beam displacement sensitivity of the monitor depends on the steel yoke dimensions. The detector sensitivity is equal to 1 Gauss/mm for the conditions adequate to the FOM-FEM project.

  12. Positive Disciplinary Project.

    ERIC Educational Resources Information Center

    Rudolph, David D.

    Maryland's Perryville High School Positive Disciplinary Project involves both actively disruptive students referred by the administration and students who have demonstrated the potential to be disruptive who are referred by teachers, guidance counselors, or parents. In either instance, the student becomes a part of the program for the entire…

  13. Position feedback control system

    DOEpatents

    Bieg, Lothar F.; Jokiel, Jr., Bernhard; Ensz, Mark T.; Watson, Robert D.

    2003-01-01

    Disclosed is a system and method for independently evaluating the spatial positional performance of a machine having a movable member, comprising an articulated coordinate measuring machine comprising: a first revolute joint; a probe arm, having a proximal end rigidly attached to the first joint, and having a distal end with a probe tip attached thereto, wherein the probe tip is pivotally mounted to the movable machine member; a second revolute joint; a first support arm serially connecting the first joint to the second joint; and coordinate processing means, operatively connected to the first and second revolute joints, for calculating the spatial coordinates of the probe tip; means for kinematically constraining the articulated coordinate measuring machine to a working surface; and comparator means, in operative association with the coordinate processing means and with the movable machine, for comparing the true position of the movable machine member, as measured by the true position of the probe tip, with the desired position of the movable machine member.

  14. Positive reinforcement for viruses.

    PubMed

    Vigant, Frederic; Jung, Michael; Lee, Benhur

    2010-10-29

    Virus-cell membrane fusion requires a critical transition from positive to negative membrane curvature. St. Vincent et al. (2010), in PNAS, designed a class of antivirals that targets this transition. These rigid amphipathic fusion inhibitors are active against an array of enveloped viruses.

  15. Positive Discipline. ERIC Digest.

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Elementary and Early Childhood Education, Urbana, IL.

    This ERIC Digest suggests methods and language that can be used in handling difficult, but common, situations involving young children. Discussion focuses on: (1) 12 methods of discipline that promote self-worth; (2) the process of creating a positive climate that promotes self-discipline; (3) harmful and negative disciplinary methods; and (4)…

  16. Analysis of Saccharides by the Addition of Amino Acids

    NASA Astrophysics Data System (ADS)

    Ozdemir, Abdil; Lin, Jung-Lee; Gillig, Kent J.; Gulfen, Mustafa; Chen, Chung-Hsuan

    2016-06-01

    In this work, we present the detection sensitivity improvement of electrospray ionization (ESI) mass spectrometry of neutral saccharides in a positive ion mode by the addition of various amino acids. Saccharides of a broad molecular weight range were chosen as the model compounds in the present study. Saccharides provide strong noncovalent interactions with amino acids, and the complex formation enhances the signal intensity and simplifies the mass spectra of saccharides. Polysaccharides provide a polymer-like ESI spectrum with a basic subunit difference between multiply charged chains. The protonated spectra of saccharides are not well identified because of different charge state distributions produced by the same molecules. Depending on the solvent used and other ions or molecules present in the solution, noncovalent interactions with saccharides may occur. These interactions are affected by the addition of amino acids. Amino acids with polar side groups show a strong tendency to interact with saccharides. In particular, serine shows a high tendency to interact with saccharides and significantly improves the detection sensitivity of saccharide compounds.

  17. Effects of soil warming and nitrogen addition on soil respiration in a New Zealand tussock grassland.

    PubMed

    Graham, Scott L; Hunt, John E; Millard, Peter; McSeveny, Tony; Tylianakis, Jason M; Whitehead, David

    2014-01-01

    Soil respiration (RS) represents a large terrestrial source of CO2 to the atmosphere. Global change drivers such as climate warming and nitrogen deposition are expected to alter the terrestrial carbon cycle with likely consequences for RS and its components, autotrophic (RA) and heterotrophic respiration (RH). Here we investigate the impacts of a 3°C soil warming treatment and a 50 kg ha(-1) y(-1) nitrogen addition treatment on RS, RH and their respective seasonal temperature responses in an experimental tussock grassland. Average respiration in untreated soils was 0.96±0.09 μmol m(-2) s(-1) over the course of the experiment. Soil warming and nitrogen addition increased RS by 41% and 12% respectively. These treatment effects were additive under combined warming and nitrogen addition. Warming increased RH by 37% while nitrogen addition had no effect. Warming and nitrogen addition affected the seasonal temperature response of RS by increasing the basal rate of respiration (R10) by 14% and 20% respectively. There was no significant interaction between treatments for R10. The treatments had no impact on activation energy (E0). The seasonal temperature response of RH was not affected by either warming or nitrogen addition. These results suggest that the additional CO2 emissions from New Zealand tussock grassland soils as a result of warming-enhanced RS constitute a potential positive feedback to rising atmospheric CO2 concentration.

  18. Responses to additional JAPC questions

    SciTech Connect

    Burke, T.M.

    1998-02-03

    The goals are to improve performance and reduce costs; the variables tested are fuel fabrication and assembly tolerances and cladding materials. Significant results are: goal lifetimes achieved; D9/HT9 alloys superior--reduced swelling potential duct mechanical attachment methods viable; test performance per design predictions.

  19. Neural Mechanisms of Positive Mood Induced Modulation of Reality Monitoring

    PubMed Central

    Subramaniam, Karuna; Gill, Jeevit; Slattery, Patrick; Shastri, Aditi; Mathalon, Daniel H.; Nagarajan, Srikantan; Vinogradov, Sophia

    2016-01-01

    This study investigates the neural mechanisms of mood induced modulation of cognition, specifically, on reality monitoring abilities. Reality monitoring is the ability to accurately distinguish the source of self-generated information from externally-presented contextual information. When participants were in a positive mood, compared to a neutral mood, they significantly improved their source memory identification abilities, particularly for self-generated information. However, being in a negative mood had no effect on reality monitoring abilities. Additionally, when participants were in a positive mood state, they showed activation in several regions that predisposed them to perform better at reality monitoring. Specifically, positive mood induced activity within the medial prefrontal cortex (mPFC) and posterior cingulate cortex (PCC) was associated with improvements in subsequent identification of self-generated information, and positive mood induced activation within the striatum (putamen) facilitated better identification of externally-presented information. These findings indicate that regions within mPFC, PCC and striatum are sensitive to positive mood-cognition enhancing effects that enable participants to be better prepared for subsequent reality monitoring decision-making. PMID:27895571

  20. Neural Mechanisms of Positive Mood Induced Modulation of Reality Monitoring.

    PubMed

    Subramaniam, Karuna; Gill, Jeevit; Slattery, Patrick; Shastri, Aditi; Mathalon, Daniel H; Nagarajan, Srikantan; Vinogradov, Sophia

    2016-01-01

    This study investigates the neural mechanisms of mood induced modulation of cognition, specifically, on reality monitoring abilities. Reality monitoring is the ability to accurately distinguish the source of self-generated information from externally-presented contextual information. When participants were in a positive mood, compared to a neutral mood, they significantly improved their source memory identification abilities, particularly for self-generated information. However, being in a negative mood had no effect on reality monitoring abilities. Additionally, when participants were in a positive mood state, they showed activation in several regions that predisposed them to perform better at reality monitoring. Specifically, positive mood induced activity within the medial prefrontal cortex (mPFC) and posterior cingulate cortex (PCC) was associated with improvements in subsequent identification of self-generated information, and positive mood induced activation within the striatum (putamen) facilitated better identification of externally-presented information. These findings indicate that regions within mPFC, PCC and striatum are sensitive to positive mood-cognition enhancing effects that enable participants to be better prepared for subsequent reality monitoring decision-making.

  1. Acquired epidermodysplasia verruciformis in an HIV-positive patient.

    PubMed

    Lau, Carmen; Acharya, Sashi; Arumainayagam, Joseph T; Kasparis, Christos; Dhesi, I

    2016-10-01

    Epidermodysplasia verruciformis (EV) is a rare dermatological manifestation of the human papillomavirus (HPV) infection, which causes distinctive skin lesions in sun-exposed areas. Both inherited and acquired forms exist. Immunocompromised individuals, such as HIV patients, are at risk of acquired EV. EV poses challenges in its management and variable responses are seen in different individuals. In addition, EV carries a significant risk of skin malignancy with certain HPV types that require skin surveillance. A case of acquired EV in a HIV-positive patient is presented in this report.

  2. Advance techniques for monitoring human tolerance to positive Gz accelerations

    NASA Technical Reports Server (NTRS)

    Pelligra, R.; Sandler, H.; Rositano, S.; Skrettingland, K.; Mancini, R.

    1973-01-01

    Tolerance to positive g accelerations was measured in ten normal male subjects using both standard and advanced techniques. In addition to routine electrocardiogram, heart rate, respiratory rate, and infrared television, monitoring techniques during acceleration exposure included measurement of peripheral vision loss, noninvasive temporal, brachial, and/or radial arterial blood flow, and automatic measurement of indirect systolic and diastolic blood pressure at 60-sec intervals. Although brachial and radial arterial flow measurements reflected significant cardiovascular changes during and after acceleration, they were inconsistent indices of the onset of grayout or blackout. Temporal arterial blood flow, however, showed a high correlation with subjective peripheral light loss.

  3. High Flow Addition Curing Polyimides

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Vannucci, Raymond D.; Ansari, Irfan; Cerny, Lawrence L.; Scheiman, Daniel A.

    1994-01-01

    A new series of high flow PMR-type addition curing polyimides was developed, which employed the substitution of 2,2'-bis (trifluoromethyl) -4,4'-diaminobiphenyl (BTDB) for p-phenylenediamine (p -PDA) in a PMR-IL formulation. These thermoset polyimides, designated as 12F resins, were prepared from BTDB and the dimethyl ester of 4,4'- (hexafluo- roisopropylidene) -diphthalic acid (HFDE) with either nadic ester (NE) or p-aminostyrene (PAS) as the endcaps for addition curing. The 12F prepolymers displayed lower melting temperatures in DSC analysis, and higher melt flow in rheological studies than the cor- responding PMR-11 polyimides. Long-term isothermal aging studies showed that BTDB- based 12F resins exhibited comparable thermo-oxidative stability to P-PDA based PMR-11 polyimides. The noncoplanar 2- and 2'-disubstituted biphenyldiamine (BTDB) not only lowered the melt viscosities of 12F prepolymers, but also retained reasonable thermal sta- bility of the cured resins. The 12F polyimide resin with p-aminostyrene endcaps showed the best promise for long-term, high-temperature application at 343 C (650 F).

  4. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  5. Additive interaction between heterogeneous environmental ...

    EPA Pesticide Factsheets

    BACKGROUND Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI) domain indices on preterm birth in the Unites States from 2000-2005.METHODS: The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built and sociodemographic) using principal component analyses. County-level preterm birth rates (n=3141) were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PD) and 95% confidence intervals (CI) comparing worse environmental quality to the better quality for each model for a) each individual domain main effect b) the interaction contrast and c) the two main effects plus interaction effect (i.e. the “net effect”) to show departure from additive interaction for the all U.S counties. Analyses were also performed for subgroupings by four urban/rural strata. RESULTS: We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction) associations. In the non-stratified model, we observed antagonistic interac

  6. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  7. A 110-year perspective of significant tornadoes

    NASA Astrophysics Data System (ADS)

    Grazulis, Thomas P.

    A tornado documentation project began in 1980 as an effort to resolve differences between the two independently designed tornado data bases used by the Nuclear Regulatory Commission (NRC). One was established for the NRC at the University of Chicago (UC) by T. T. Fujita for the years 1916-1985. In addition, the NRC assisted the National Severe Storms Forecast Center (NSSFC) in adding F scale ratings to the existing NSSFC data base in Kansas City, from 1950 to the present. The final task of this effort (hereinafter called the project) was to locate and list all significant tornadoes from 1880 through 1989. Significant is defined here as all tornadoes doing confirmable F-2 or greater damage or causing a death.

  8. Positive Outcome Expectancy Mediates the Relationship Between Peer Influence and Internet Gaming Addiction Among Adolescents in Taiwan.

    PubMed

    Wu, Jo Yung Wei; Ko, Huei-Chen; Wong, Tsui-Yin; Wu, Li-An; Oei, Tian Po

    2016-01-01

    The present study examined the role of positive outcome expectancy in the relationship between peer/parental influence and Internet gaming addiction (IGA) among adolescents in Taiwan. Two thousand, one hundred and four junior high students completed the Chen Internet Addiction Scale for IGA, Parental Influence for IGA, peer influence for IGA, and Positive Outcome Expectancy of Internet Gaming Questionnaire. Results showed that the three types of peer influences (positive attitudes toward Internet gaming, frequency of Internet game use, and invitation to play) and positive outcome expectancy were significantly and positively correlated with IGA. Moreover, peer influence was also positively correlated with positive outcome expectancy. On the other hand, positive outcome expectancy and parental influences had a low correlation. Structural equation modeling analysis revealed that positive outcome expectancy did not mediate the relationship between either type of parental influences and IGA, and only the parent's invitation to play Internet games directly predicted IGA severity. However, peers' positive attitude or the frequency of peers' Internet game use positively predicted IGA and was fully mediated through positive outcome expectancy of Internet gaming. In addition, the frequency of peers' invitation to play Internet games directly and indirectly predicted IGA severity through a partial mediation of positive outcome expectancy of Internet gaming. The overall fit of the model was adequate and was able to explain 25.0 percent of the variance. The findings provide evidence in illuminating the role of peer influences and positive outcome expectancy of Internet gaming in the process of why adolescents may develop IGA.

  9. Astrobiological Significance of Chemolithoautotrophic Acidophiles

    NASA Technical Reports Server (NTRS)

    Pikuta, Elena V.; Hoover, Richard B.

    2003-01-01

    For more than a century (since Winogradsky discovered lithoautotrophic bacteria) a dilemma in microbiology has concerned life that first inhabited the Earth. Which types of life forms first appeared in the primordial oceans during the earliest geological period on Earth as the primary ancestors of modem biological diversity? How did a metabolism of ancestors evolve: from lithoautotrophic to lithohetherotrophic and organoheterotrophic or from organoheterotrophic to organoautotrophic and lithomixotrophic types? At the present time, it is known that chemolithoheterotrophic and chemolithoautotrophic metabolizing bacteria are wide spread in different ecosystems. On Earth the acidic ecosystems are associated with geysers, volcanic fumaroles, hot springs, deep sea hydrothermal vents, caves, acid mine drainage and other technogenic ecosystems. Bioleaching played a significant role on a global geological scale during the Earth's formation. This important feature of bacteria has been successfully applied in industry. The lithoautotrophs include Bacteria and Archaea belonging to diverse genera containing thermophilic and mesophilic species. In this paper we discuss the lithotrophic microbial acidophiles and present some data with a description of new acidophilic iron- and sulfur- oxidizing bacterium isolated from the Chena Hot Springs in Alaska. We also consider the possible relevance of microbial acidophiles to Venus, Io, and acidic inclusions in glaciers and icy moons.

  10. Statistically significant relational data mining :

    SciTech Connect

    Berry, Jonathan W.; Leung, Vitus Joseph; Phillips, Cynthia Ann; Pinar, Ali; Robinson, David Gerald; Berger-Wolf, Tanya; Bhowmick, Sanjukta; Casleton, Emily; Kaiser, Mark; Nordman, Daniel J.; Wilson, Alyson G.

    2014-02-01

    This report summarizes the work performed under the project (3z(BStatitically significant relational data mining.(3y (BThe goal of the project was to add more statistical rigor to the fairly ad hoc area of data mining on graphs. Our goal was to develop better algorithms and better ways to evaluate algorithm quality. We concetrated on algorithms for community detection, approximate pattern matching, and graph similarity measures. Approximate pattern matching involves finding an instance of a relatively small pattern, expressed with tolerance, in a large graph of data observed with uncertainty. This report gathers the abstracts and references for the eight refereed publications that have appeared as part of this work. We then archive three pieces of research that have not yet been published. The first is theoretical and experimental evidence that a popular statistical measure for comparison of community assignments favors over-resolved communities over approximations to a ground truth. The second are statistically motivated methods for measuring the quality of an approximate match of a small pattern in a large graph. The third is a new probabilistic random graph model. Statisticians favor these models for graph analysis. The new local structure graph model overcomes some of the issues with popular models such as exponential random graph models and latent variable models.

  11. Determining Semantically Related Significant Genes.

    PubMed

    Taha, Kamal

    2014-01-01

    GO relation embodies some aspects of existence dependency. If GO term xis existence-dependent on GO term y, the presence of y implies the presence of x. Therefore, the genes annotated with the function of the GO term y are usually functionally and semantically related to the genes annotated with the function of the GO term x. A large number of gene set enrichment analysis methods have been developed in recent years for analyzing gene sets enrichment. However, most of these methods overlook the structural dependencies between GO terms in GO graph by not considering the concept of existence dependency. We propose in this paper a biological search engine called RSGSearch that identifies enriched sets of genes annotated with different functions using the concept of existence dependency. We observe that GO term xcannot be existence-dependent on GO term y, if x- and y- have the same specificity (biological characteristics). After encoding into a numeric format the contributions of GO terms annotating target genes to the semantics of their lowest common ancestors (LCAs), RSGSearch uses microarray experiment to identify the most significant LCA that annotates the result genes. We evaluated RSGSearch experimentally and compared it with five gene set enrichment systems. Results showed marked improvement.

  12. Assessment of preschoolers’ positive empathy: concurrent and longitudinal relations with positive emotion, social competence, and sympathy

    PubMed Central

    Sallquist, Julie; Eisenberg, Nancy; Spinrad, Tracy L.; Eggum, Natalie D.; Gaertner, Bridget M.

    2009-01-01

    The purpose of this study was to examine a new measure of children’s dispositional positive empathy (i.e., reactions to others’ positive emotions) and its concurrent and longitudinal relations with positive emotion, social competence, and empathy/sympathy with negative emotions. At Time 1, 192 3.5-year-olds (88 girls) participated; at Time 2, 1 year later, 168 4.5-year-olds (79 girls) participated. Children’s positive empathy was reported by mothers and observed in the laboratory at Time 2. Additionally, mothers, fathers, and non-parental caregivers completed questionnaires at Time 1 and Time 2 regarding children’s positive emotion, empathy/sympathy, and social competence. Children’s positive emotion was observed at both assessments. There was evidence of reliability of the new reported measure of positive empathy. Additionally, there were numerous positive relations between positive empathy and social competence and between positive empathy and empathy/sympathy with negative emotions. This study provides unique insight into children’s positive empathy and relations to socio-emotional functioning. PMID:20011674

  13. 40 CFR 725.950 - Additional recordkeeping requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional Procedures for Reporting on Significant New Uses of Microorganisms § 725.950 Additional recordkeeping requirements. Persons submitting a MCAN for a significant new use of a microorganism must comply with...

  14. 40 CFR 725.950 - Additional recordkeeping requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional Procedures for Reporting on Significant New Uses of Microorganisms § 725.950 Additional recordkeeping requirements. Persons submitting a MCAN for a significant new use of a microorganism must comply with...

  15. 40 CFR 725.950 - Additional recordkeeping requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional Procedures for Reporting on Significant New Uses of Microorganisms § 725.950 Additional recordkeeping requirements. Persons submitting a MCAN for a significant new use of a microorganism must comply with...

  16. 40 CFR 725.950 - Additional recordkeeping requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional Procedures for Reporting on Significant New Uses of Microorganisms § 725.950 Additional recordkeeping requirements. Persons submitting a MCAN for a significant new use of a microorganism must comply with...

  17. 40 CFR 725.950 - Additional recordkeeping requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional Procedures for Reporting on Significant New Uses of Microorganisms § 725.950 Additional recordkeeping requirements. Persons submitting a MCAN for a significant new use of a microorganism must comply with...

  18. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  19. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  20. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  1. Optics of progressive addition lenses.

    PubMed

    Sheedy, J E; Buri, M; Bailey, I L; Azus, J; Borish, I M

    1987-02-01

    The optical characteristics of the major progressive addition lenses were measured using an automated lensometer with a specially designed lens holder to simulate eye rotation. Measurements were made every 3 degrees (about 1.5 mm) and graphs of isospherical equivalent lines and isocylinder lines were developed. Generally the near zone of these lenses is narrower and lower than in bifocal or trifocal lenses. Distinct differences exist between the various progressive lenses. The width of the near zone, rate of power progression, amount of unwanted cylinder (level with the distance center), and clarity of the distance zone are compared for the various lenses. The optical measurements demonstrate an apparent trade-off between the size of the cylinder-free area of the lens and the amount of the cylinder.

  2. Racial differences in trends and predictors of infant sleep positioning in South Carolina, 1996-2007.

    PubMed

    Smith, Michael G; Liu, Ji-Hong; Helms, Kristen H; Wilkerson, Kristin L

    2012-01-01

    This paper examines racial differences in trends and predictors of prone and lateral infant sleep positioning among South Carolina mothers and infants. Pregnancy Risk Assessment Monitoring System data were used to analyze linear trends in prone, lateral, and supine infant sleep positioning among 14,648 mother-infant pairs from 1996 to 2007. Logistic regression models were used to examine the predictors of prone and lateral positioning among 9,015 mother-infant pairs from 2000 to 2007. From 1996 to 2007, white infants experienced a reduction in both prone and lateral positioning and an increase in supine positioning (28.2-66.7%), while black infants had smaller decreases in prone and lateral positioning and a smaller increase in supine positioning (22.6-47.1%) than white infants. Compared to births in 2000-2005, births after the explicit recommendation that infants not be placed in the lateral sleep position (2006-2007) were associated with decreased odds of lateral positioning among white infants (odds ratio [OR]: 0.66; 95% confidence interval [CI]: 0.51, 0.87) but not among black infants. The significant predictors of white infants being placed in the prone position were different from the predictors for black infants. Additionally, with regard to lateral sleep positioning, more significant predictors were observed among white infants than black infants. These findings suggest that efforts are warranted to increase the prevalence of supine sleep positioning, especially among black infants. Race-specific programs may efficiently reduce non-supine sleep positioning to help narrow racial gaps in sudden infant death syndrome.

  3. Positive isolation disconnect

    NASA Technical Reports Server (NTRS)

    Rosener, A. A.; Jonkoniec, T. G.

    1975-01-01

    A positive isolation disconnect was developed for component replacement in serviced liquid and gaseous spacecraft systems. Initially a survey of feasible concepts was made to determine the optimum method for fluid isolation, sealing techniques, coupling concepts, and foolproofing techniques. The top concepts were then further evaluated, including the fabrication of a semifunctional model. After all tradeoff analyses were made, a final configuration was designed and fabricated for development testing. This resulted in a 6.35 mm (1/4 inch) line and 12.7 mm (1/2 inch) line positive isolation disconnect, each unit consisting of two coupled disconnect halves, each capable of fluid isolation with essentially zero clearance between them for zero leakage upon disconnect half disengagement. An interlocking foolproofing technique was incorporated that prevents uncoupling of disconnect halves prior to fluid isolation.

  4. Membrane position control

    NASA Technical Reports Server (NTRS)

    Su, Ji (Inventor); Harrison, Joycelyn S. (Inventor)

    2004-01-01

    A membrane structure includes at least one electroactive bending actuator fixed to a supporting base. Each electroactive bending actuator is operatively connected to the membrane for controlling membrane position. Any displacement of each electroactive bending actuator effects displacement of the membrane. More specifically, the operative connection is provided by a guiding wheel assembly and a track, wherein displacement of the bending actuator effects translation of the wheel assembly along the track, thereby imparting movement to the membrane.

  5. Mapping your competitive position.

    PubMed

    D'Aveni, Richard A

    2007-11-01

    A price-benefit positioning map helps you see, through your customers' eyes, how your product compares with all its competitors in a market. You can draw such a map quickly and objectively, without having to resort to costly, time-consuming consumer surveys or subjective estimates of the excellence of your product and the shortcomings of all the others. Creating a positioning map involves three steps: First, define your market to include everything your customers might consider to be your product's competitors or substitutes. Second, track the price your customers actually pay (wholesale or retail? bundled or unbundled?) and identify what your customers see as your offering's primary benefit. This is done through regression analysis, determining which of the product's attributes (as described objectively by rating services, government agencies, R&D departments, and the like) explains most of the variance in its price. Third, draw the map by plotting on a graph the position of every product in the market you've selected according to its price and its level of primary benefit, and draw a line that runs through the middle of the points. What you get is a picture of the competitive landscape of your market, where all the products above the line command a price premium owing to some secondary benefit customers value, and all those below the line are positioned to earn market share through lower prices and reduced secondary benefits. Using examples as varied as Harley-Davidson motorcycles, Motorola cell phones, and the New York restaurant market, Tuck professor D'Aveni demonstrates some of the many ways the maps can be used: to locate unoccupied or less-crowded spaces in highly competitive markets, for instance, or to identify opportunities created through changes in the relationship between the primary benefit and prices. The maps even allow companies to anticipate--and counter-- rivals' strategies. R eprint RO711G

  6. Nuclear core positioning system

    DOEpatents

    Garkisch, Hans D.; Yant, Howard W.; Patterson, John F.

    1979-01-01

    A structural support system for the core of a nuclear reactor which achieves relatively restricted clearances at operating conditions and yet allows sufficient clearance between fuel assemblies at refueling temperatures. Axially displaced spacer pads having variable between pad spacing and a temperature compensated radial restraint system are utilized to maintain clearances between the fuel elements. The core support plates are constructed of metals specially chosen such that differential thermal expansion produces positive restraint at operating temperatures.

  7. Photon beam position monitor

    DOEpatents

    Kuzay, T.M.; Shu, D.

    1995-02-07

    A photon beam position monitor is disclosed for use in the front end of a beamline of a high heat flux and high energy photon source such as a synchrotron radiation storage ring detects and measures the position and, when a pair of such monitors are used in tandem, the slope of a photon beam emanating from an insertion device such as a wiggler or an undulator inserted in the straight sections of the ring. The photon beam position monitor includes a plurality of spaced blades for precisely locating the photon beam, with each blade comprised of chemical vapor deposition (CVD) diamond with an outer metal coating of a photon sensitive metal such as tungsten, molybdenum, etc., which combination emits electrons when a high energy photon beam is incident upon the blade. Two such monitors are contemplated for use in the front end of the beamline, with the two monitors having vertically and horizontally offset detector blades to avoid blade ''shadowing''. Provision is made for aligning the detector blades with the photon beam and limiting detector blade temperature during operation. 18 figs.

  8. Photon beam position monitor

    DOEpatents

    Kuzay, Tuncer M.; Shu, Deming

    1995-01-01

    A photon beam position monitor for use in the front end of a beamline of a high heat flux and high energy photon source such as a synchrotron radiation storage ring detects and measures the position and, when a pair of such monitors are used in tandem, the slope of a photon beam emanating from an insertion device such as a wiggler or an undulator inserted in the straight sections of the ring. The photon beam position monitor includes a plurality of spaced blades for precisely locating the photon beam, with each blade comprised of chemical vapor deposition (CVD) diamond with an outer metal coating of a photon sensitive metal such as tungsten, molybdenum, etc., which combination emits electrons when a high energy photon beam is incident upon the blade. Two such monitors are contemplated for use in the front end of the beamline, with the two monitors having vertically and horizontally offset detector blades to avoid blade "shadowing". Provision is made for aligning the detector blades with the photon beam and limiting detector blade temperature during operation.

  9. Welding nozzle position manipulator

    NASA Technical Reports Server (NTRS)

    Gilbert, Jeffrey L. (Inventor); Gutow, David A. (Inventor)

    1994-01-01

    The present invention is directed to a welding nozzle position manipulator. The manipulator consists of an angle support to which the remaining components of the device are attached either directly or indirectly. A pair of pivotal connections attach a weld nozzle holding link to the angle support and provide a two axis freedom of movement of the holding link with respect to the support angle. The manipulator is actuated by a pair of adjusting screws angularly mounted to the angle support. These screws contact a pair of tapered friction surfaces formed on the upper portion of the welding nozzle holding link. A spring positioned between the upper portions of the support angle and the holding link provides a constant bias engagement between the friction surfaces of the holding link and the adjustment screws, so as to firmly hold the link in position and to eliminate any free play in the adjustment mechanism. The angular relationships between the adjustment screws, the angle support and the tapered friction surfaces of the weld nozzle holding link provide a geometric arrangement which permits precision adjustment of the holding link with respect to the angle support and also provides a solid holding link mount which is resistant to movement from outside forces.

  10. Welding nozzle position manipulator

    NASA Astrophysics Data System (ADS)

    Gilbert, Jeffrey L.; Gutow, David A.

    1994-11-01

    The present invention is directed to a welding nozzle position manipulator. The manipulator consists of an angle support to which the remaining components of the device are attached either directly or indirectly. A pair of pivotal connections attach a weld nozzle holding link to the angle support and provide a two axis freedom of movement of the holding link with respect to the support angle. The manipulator is actuated by a pair of adjusting screws angularly mounted to the angle support. These screws contact a pair of tapered friction surfaces formed on the upper portion of the welding nozzle holding link. A spring positioned between the upper portions of the support angle and the holding link provides a constant bias engagement between the friction surfaces of the holding link and the adjustment screws, so as to firmly hold the link in position and to eliminate any free play in the adjustment mechanism. The angular relationships between the adjustment screws, the angle support and the tapered friction surfaces of the weld nozzle holding link provide a geometric arrangement which permits precision adjustment of the holding link with respect to the angle support and also provides a solid holding link mount which is resistant to movement from outside forces.

  11. Welding nozzle position manipulator

    NASA Astrophysics Data System (ADS)

    Gilbert, Jeffrey L.; Gutow, David A.

    1993-08-01

    The present invention is directed to a welding nozzle position manipulator. The manipulator consists of an angle support to which the remaining components of the device are attached either directly or indirectly. A pair of pivotal connections attach a weld nozzle holding link to the angle support and provide a two axis freedom of movement of the holding link with respect to the support angle. The manipulator is actuated by a pair of adjusting screws angularly mounted to the angle support. These screws contact a pair of tapered friction surfaces formed on the upper portion of the welding nozzle holding link. A spring positioned between the upper portions of the support angle and the holding link provides a constant bias engagement between the friction surfaces of the holding link and the adjustment screws, so as to firmly hold the link in position and to eliminate any free play in the adjustment mechanism. The angular relationships between the adjustment screws, the angle support and the tapered friction surfaces of the weld nozzle holding link provide a geometric arrangement which permits precision adjustment of the holding link with respect to the angle support and also provides a solid holding link mount which is resistant to movement from outside forces.

  12. Effects of water addition on soil arthropods and soil characteristics in a precipitation-limited environment

    NASA Astrophysics Data System (ADS)

    Chikoski, Jennifer M.; Ferguson, Steven H.; Meyer, Lense

    2006-09-01

    We investigated the effect of water addition and season on soil arthropod abundance and soil characteristics (%C, %N, C:N, moisture, pH). The experimental design consisted of 24 groups of five boxes distributed within a small aspen stand in Saskatchewan, Canada. The boxes depressed the soil to create a habitat with suitable microclimate for soil arthropods, and by overturning boxes we counted soil arthropods during weekly surveys from April to September 1999. Soil samples were collected at two-month intervals and water was added once per week to half of the plots. Of the eleven recognizable taxonomic units identified, only mites (Acari) and springtails (Collembola) responded to water addition by increasing abundance, whereas ants decreased in abundance with water addition. During summer, springtail numbers increased with water addition, whereas pH was a stronger determinant of mite abundance. In autumn, springtails were positively correlated with water and negatively correlated with mites, whereas mite abundance was negatively correlated with increasing C:N ratio, positively correlated to water addition, and negatively correlated with springtail abundance. Although both mite and springtail numbers decreased in autumn with a decrease in soil moisture, mites became more abundant than springtails suggesting a predator-prey (mite-springtail) relationship. Water had a significant effect on both springtails and mites in summer and autumn supporting the assertion that prairie soil communities are water limited.

  13. Does betahistine treatment have additional benefits to vestibular rehabilitation?

    PubMed

    Karapolat, Hale; Celebisoy, Nese; Kirazli, Yesim; Bilgen, Cem; Eyigor, Sibel; Gode, Sercan; Akyuz, Aycan; Kirazli, Tayfun

    2010-08-01

    The aim of this study was to investigate the effect of high-dose betahistine treatment added to vestibular rehabilitation (VR) on the disability, balance and postural stability in patients with unilateral vestibular disorder. The VR group (group 1, n = 24) and the VR + betahistine group (group 2, n = 23) were analyzed retrospectively. All patients were evaluated before and after an 8-week customized VR in terms of disability (Dizziness Handicap Inventory, DHI), dynamic balance [Dynamic Gait Index (DGI)] and postural stability (static posturography). In group 1 and group 2, differences between DHI, DGI and falling index score on static posturography before and after the exercise program were significant (p < 0.05). In addition, a significant difference was detected only in group 2 in the variables evaluated in static posturography-Fourier 4 analysis (p < 0.05). Both VR and betahistine + VR have a positive effect on disability and balance in patients with unilateral vestibular disorder. Betahistine treatment added to VR was effective in increasing postural stability.

  14. Stannous sulfate as an electrolyte additive for lead acid battery made from a novel ultrafine leady oxide

    NASA Astrophysics Data System (ADS)

    Wang, Qin; Liu, Jianwen; Yang, Danni; Yuan, Xiqing; Li, Lei; Zhu, Xinfeng; Zhang, Wei; Hu, Yucheng; Sun, Xiaojuan; Liang, Sha; Hu, Jingping; Kumar, R. Vasant; Yang, Jiakuan

    2015-07-01

    The effects of SnSO4 as an electrolyte additive on the microstructure of positive plate and electrochemical performance of lead acid battery made from a novel leady oxide are investigated. The novel leady oxide is synthesized through leaching of spent lead paste in citric acid solution. The novel leady oxides are used to prepare working electrode (WE) subjected to electrochemical cyclic voltammetry (CV) tests. Moreover, the novel leady oxides are used as active materials of positive plate assembled as a testing battery of 1.85 A h capacity. In CV tests, SEM/EDX results show that the major crystalline phase of the paste in WE after CV cycles is PbSO4. The larger column-shaped PbSO4 crystals easily generate in the paste of WE without an electrolyte additive of SnSO4. However, PbSO4 crystals significantly become smaller with the addition of SnSO4 in the electrolyte. In batteries testing, SEM results show that an electrolyte additive of SnSO4 could effectively decrease PbO2 particle size in the positive active materials of the teardown battery at the end of charging procedure. It is indicated that an electrolyte additive of SnSO4 could have a positive influence on restraining larger particles of irreversible sulfation in charge/discharge cycles of battery testing.

  15. Positive expiratory pressure and oscillatory positive expiratory pressure therapies.

    PubMed

    Myers, Timothy R

    2007-10-01

    Airway clearance techniques, historically referred to as chest physical therapy, have traditionally consisted of a variety of breathing maneuvers or exercises and manual percussion and postural drainage. The methods and types of airway clearance techniques and devices have rapidly increased in an effort to find a more efficacious strategy that allows for self-therapy, better patient adherence and compliance, and more efficient durations of care. Mechanically applied pressure devices have migrated from European countries over the last several decades to clinical practice in the United States. I conducted a comprehensive MEDLINE search of two such devices: positive expiratory pressure (PEP) and oscillatory positive expiratory pressure (OPEP) and their role in airway clearance strategies. This was followed by a comprehensive search for cross-references in an attempt to identify additional studies. The results of that search are contained and reported in this review. From a methods standpoint, most of the studies of PEP and OPEP for airway clearance are limited by crossover designs and small sample sizes. While PEP and OPEP do not definitively prove superiority to other methods of airway clearance strategies, there is no clear evidence that they are inferior. Ultimately, the correct choice may be an airway clearance strategy that is clinically and cost effective, and is preferred by the patient so that adherence and compliance can be at the very least supported.

  16. A Faraday effect position sensor for interventional magnetic resonance imaging.

    PubMed

    Bock, M; Umathum, R; Sikora, J; Brenner, S; Aguor, E N; Semmler, W

    2006-02-21

    An optical sensor is presented which determines the position and one degree of orientation within a magnetic resonance tomograph. The sensor utilizes the Faraday effect to measure the local magnetic field, which is modulated by switching additional linear magnetic fields, the gradients. Existing methods for instrument localization during an interventional MR procedure often use electrically conducting structures at the instruments that can heat up excessively during MRI and are thus a significant danger for the patient. The proposed optical Faraday effect position sensor consists of non-magnetic and electrically non-conducting components only so that heating is avoided and the sensor could be applied safely even within the human body. With a non-magnetic prototype set-up, experiments were performed to demonstrate the possibility of measuring both the localization and the orientation in a magnetic resonance tomograph. In a 30 mT m(-1) gradient field, a localization uncertainty of 1.5 cm could be achieved.

  17. Astrobiological Significance of Microbial Extremophiles

    NASA Technical Reports Server (NTRS)

    Pikuta, Elena V.; Hoover, Richard B.

    2007-01-01

    The microflora of the cryosphere of planet Earth provides the best analogs for life forms that might be found in the permafrost or polar ice caps of Mars, near the surface of the cometary nuclei, or in the liquid water beneath and the ice crusts of icy moons of Jupiter and Saturn. The importance of study alkaliphilic microorganisms for astrobiology was enhanced by the findings of abundant carbonates and carbonate globules rimmed with possibly biogenic magnetites in association with the putative microfossils in the ALH84001 meteorite. Although the ALH84001 "nanofossils" were to small and simple to be unambiguously recognized as biogenic, they stimulated Astrobiology research and studies of microbial extremophiles and biomarkers in ancient rocks and meteorites. Recent studies of CI and CM carbonaceous meteorites have resulted in the detection of the well-preserved mineralized remains of coccoidal and filamentous microorganisms in cyanobacterial mats. Energy Dispersive X-ray Analysis has shown anomalous biogenic element ratios clearly indicating they are not recent biological contaminants. This paper reviews microbial extremophiles in context of their significance to Astrobiology. The study of halophilic microorganisms was started from work with saline soils and lakes, and one of the record of good growth for Haloferax mediterranei was shown at 30 percent NaC1. Although alkali-tolerant nitrifying bacteria had previously been reported, the first described alkaliphilic microorganism was the bacterium Streptococcus faecalis. Halophilic and alkaliphilic forms are relevant to conditions that might be found in closed impact basins and craters on Mars filled with evaporite deposits. The first obligately acidophilic bacterium described was Acidithiobacillus ferrooxydans (formally Thiobacillus ferrooxidans). Later thermophilic lithotrophic acidophiles were found, and the hyperacidophilic moderately thermophilic species of the genus Picrophilus were found to grow at negative p

  18. Religion, spirituality, positive youth development, and thriving.

    PubMed

    King, Pamela Ebstyne; Carr, Drew; Boitor, Ciprian

    2011-01-01

    Issues of spirituality and thriving are pertinent to the period of adolescence given the marked changes in body, mind, and relationships. In order to provide an overview of the relationship between religion, spirituality, and positive youth development, this chapter offers a developmental systems perspective and proposes a relational spirituality as a framework for understanding adolescent religious and spiritual development. In addition, the chapter examines various psychological mechanisms through which religion and spirituality may promote positive youth development. Existing empirical research on the relationships between adolescent religion, spirituality, thriving, and specific indicators of positive youth development is reviewed. Finally, future directions for continuing to build the field of study are discussed.

  19. Canopy position has a profound effect on soybean seed composition.

    PubMed

    Huber, Steven C; Li, Kunzhi; Nelson, Randall; Ulanov, Alexander; DeMuro, Catherine M; Baxter, Ivan

    2016-01-01

    Although soybean seeds appear homogeneous, their composition (protein, oil and mineral concentrations) can vary significantly with the canopy position where they were produced. In studies with 10 cultivars grown over a 3-yr period, we found that seeds produced at the top of the canopy have higher concentrations of protein but less oil and lower concentrations of minerals such as Mg, Fe, and Cu compared to seeds produced at the bottom of the canopy. Among cultivars, mean protein concentration (average of different positions) correlated positively with mean concentrations of S, Zn and Fe, but not other minerals. Therefore, on a whole plant basis, the uptake and allocation of S, Zn and Fe to seeds correlated with the production and allocation of reduced N to seed protein; however, the reduced N and correlated minerals (S, Zn and Fe) showed different patterns of allocation among node positions. For example, while mean concentrations of protein and Fe correlated positively, the two parameters correlated negatively in terms of variation with canopy position. Altering the microenvironment within the soybean canopy by removing neighboring plants at flowering increased protein concentration in particular at lower node positions and thus altered the node-position gradient in protein (and oil) without altering the distribution of Mg, Fe and Cu, suggesting different underlying control mechanisms. Metabolomic analysis of developing seeds at different positions in the canopy suggests that availability of free asparagine may be a positive determinant of storage protein accumulation in seeds and may explain the increased protein accumulation in seeds produced at the top of the canopy. Our results establish node-position variation in seed constituents and provide a new experimental system to identify genes controlling key aspects of seed composition. In addition, our results provide an unexpected and simple approach to link agronomic practices to improve human nutrition and health

  20. Canopy position has a profound effect on soybean seed composition

    PubMed Central

    Ulanov, Alexander; DeMuro, Catherine M.

    2016-01-01

    Although soybean seeds appear homogeneous, their composition (protein, oil and mineral concentrations) can vary significantly with the canopy position where they were produced. In studies with 10 cultivars grown over a 3-yr period, we found that seeds produced at the top of the canopy have higher concentrations of protein but less oil and lower concentrations of minerals such as Mg, Fe, and Cu compared to seeds produced at the bottom of the canopy. Among cultivars, mean protein concentration (average of different positions) correlated positively with mean concentrations of S, Zn and Fe, but not other minerals. Therefore, on a whole plant basis, the uptake and allocation of S, Zn and Fe to seeds correlated with the production and allocation of reduced N to seed protein; however, the reduced N and correlated minerals (S, Zn and Fe) showed different patterns of allocation among node positions. For example, while mean concentrations of protein and Fe correlated positively, the two parameters correlated negatively in terms of variation with canopy position. Altering the microenvironment within the soybean canopy by removing neighboring plants at flowering increased protein concentration in particular at lower node positions and thus altered the node-position gradient in protein (and oil) without altering the distribution of Mg, Fe and Cu, suggesting different underlying control mechanisms. Metabolomic analysis of developing seeds at different positions in the canopy suggests that availability of free asparagine may be a positive determinant of storage protein accumulation in seeds and may explain the increased protein accumulation in seeds produced at the top of the canopy. Our results establish node-position variation in seed constituents and provide a new experimental system to identify genes controlling key aspects of seed composition. In addition, our results provide an unexpected and simple approach to link agronomic practices to improve human nutrition and health

  1. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting.

  2. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  3. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  4. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  5. Dynamics of ultrasonic additive manufacturing.

    PubMed

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder.

  6. Dimensionless numbers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

    2017-02-01

    The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

  7. Children's understanding of additive concepts.

    PubMed

    Robinson, Katherine M; Dubé, Adam K; Beatch, Jacqueline-Ann

    2017-04-01

    Most research on children's arithmetic concepts is based on one concept at a time, limiting the conclusions that can be made about how children's conceptual knowledge of arithmetic develops. This study examined six arithmetic concepts (identity, negation, commutativity, equivalence, inversion, and addition and subtraction associativity) in Grades 3, 4, and 5. Identity (a-0=a) and negation (a-a=0) were well understood, followed by moderate understanding of commutativity (a+b=b+a) and inversion (a+b-b=a), with weak understanding of equivalence (a+b+c=a+[b+c]) and associativity (a+b-c=[b-c]+a). Understanding increased across grade only for commutativity and equivalence. Four clusters were found: The Weak Concept cluster understood only identity and negation; the Two-Term Concept cluster also understood commutativity; the Inversion Concept cluster understood identity, negation, and inversion; and the Strong Concept cluster had the strongest understanding of all of the concepts. Grade 3 students tended to be in the Weak and Inversion Concept clusters, Grade 4 students were equally likely to be in any of the clusters, and Grade 5 students were most likely to be in the Two-Term and Strong Concept clusters. The findings of this study highlight that conclusions about the development of arithmetic concepts are highly dependent on which concepts are being assessed and underscore the need for multiple concepts to be investigated at the same time.

  8. Abnormal Head Position

    MedlinePlus

    ... cause. Can a longstanding head turn lead to any permanent problems? Yes, a significant abnormal head posture could cause permanent ... occipitocervical synostosis and unilateral hearing loss. Are there any ... postures? Yes. Abnormal head postures can usually be improved depending ...

  9. Frequency of head-impact-related outcomes by position in NCAA division I collegiate football players.

    PubMed

    Baugh, Christine M; Kiernan, Patrick T; Kroshus, Emily; Daneshvar, Daniel H; Montenigro, Philip H; McKee, Ann C; Stern, Robert A

    2015-03-01

    Concussions and subconcussive impacts sustained in American football have been associated with short- and long-term neurological impairment, but differences in head impact outcomes across playing positions are not well understood. The American Medical Society for Sports Medicine has identified playing position as a key risk factor for concussion in football and one for which additional research is needed. This study examined variation in head impact outcomes across primary football playing positions in a group of 730 National Collegiate Athletic Association Division I Football Championship Series athletes, using a self-report questionnaire. Although there were no significant differences between position groups in the number of diagnosed concussions during the 2012 football season, there were significant differences between groups in undiagnosed concussions (p=0.008) and "dings" (p<0.001); offensive linemen reported significantly higher numbers than most other positions. Significant differences were found between position groups in the frequencies of several postimpact symptoms, including dizziness (p<0.001), headache (p<0.001), and seeing stars (p<0.001) during the 2012 football season, with offensive linemen reporting significantly more symptoms compared to most other groups. There were also positional differences in frequency of returning to play while symptomatic (p<0.001) and frequency of participating in full-contact practice (p<0.001). Offensive linemen reported having returned to play while experiencing symptoms more frequently and participating in more full-contact practices than other groups. These findings suggest that offensive linemen, a position group that experiences frequent, but low-magnitude, head impacts, develop more postimpact symptoms than other playing positions, but do not report these symptoms as a concussion.

  10. Bond additivity corrections for quantum chemistry methods

    SciTech Connect

    Melius, C.F.; Allendorf, M.D.

    2000-03-23

    New bond additivity correction (BAC) methods have been developed for the G2 method, BAC-G2, as well as for a hybrid density functional theory (DFT) Moller-Plesset (MP)2 method, BAC-hybrid. These BAC methods use a new form of BAC corrections, involving atomic, molecular, and bond-wise additive terms. These terms enable one to treat positive and negative ions as well as neutrals. The BAC-G2 method reduces errors in the G2 method due to nearest-neighbor bonds. The parameters within the BAC-G2 method only depend on atom types. Thus the BAC-G2 method can be used to determine the parameters needed by BAC methods involving lower levels of theory, such as BAC-hybrid and BAC-MP4. The BAC-hybrid method is expected to scale well for large molecules. The BAC-hybrid method uses the differences between the DFT and MP2 predictions as an indication of the method's accuracy, whereas the BAC-G2 method uses its internal methods (G1 and G2MP2) to accomplish this. A statistical analysis of the error in each of the methods is presented on the basis of calculations performed for large sets (more than 120) of molecules.

  11. Effect of vermicomposting on concentration and speciation of heavy metals in sewage sludge with additive materials.

    PubMed

    He, Xin; Zhang, Yaxin; Shen, Maocai; Zeng, Guangming; Zhou, Mucen; Li, Meirong

    2016-10-01

    The aim of this work was to evaluate the total content and speciation of heavy metals (As, Cr, Cd, Cu, Fe, Mn, Ni, Pb and Zn) during vermicomposting of sewage sludge by Eisenia fetida earthworm with different additive materials (soil, straw, fly ash and sawdust). Results showed that the pH, total organic carbon were reduced, while the electric conductivity and germination index increased after a combined composting - vermicomposting process. The addition of bulking agents accelerated the stabilization of sludge and eliminated its toxicity. The total heavy metals after vermicomposting in 10 scenarios were lowered as compared with the initial values and the control without amendment. BCR sequential extraction indicated that vermicomposting significantly decreased the mobility of all heavy metals by increasing the residual fractions. The activity of earthworms and appropriate addition of amendment materials played a positive role in sequestering heavy metals during the treatment of sewage sludge.

  12. Significance testing of orbital forcing in deep time

    NASA Astrophysics Data System (ADS)

    Kemp, David

    2016-04-01

    The recognition of orbitally forced (Milankovitch) climate cycles in geological archives marked a paradigm shift in Earth science, revealing a heartbeat within the climate system of general importance and key utility. Resolving orbital cycles in stratigraphic data is, however, problematic owing to the imperfect stratigraphic preservation of climate signals, the masking effects of non-periodic variance, and uncertainties in the expected responses of proxy records to climate change. Power spectral analysis is the primary tool used to facilitate identification of orbital cycles in stratigraphic data, but commonly employed methods for testing the significance of relatively high narrow-band variance of potential orbital origin in spectra have been criticised for inadequately balancing the respective probabilities of type I (false positive) and type II (false negative) errors. This has led to suggestions that the importance of orbital forcing in deep time is overstated [1]. It can be readily demonstrated, however, that the imperfect nature of the stratigraphic record sets an upper limit on the attainable significance of orbital signals. Optimised significance testing is that which minimises the sum of type I and type II errors [2]. Numerical simulations of stratigraphically preserved orbital signals suggest that optimum significance levels at which to reject a null hypothesis of no orbital forcing cluster between 99% and 99.9%. This is lower than recently advocated [1], but higher than the 90-99% levels most commonly employed in the literature. Nevertheless, in consonance with the emergent view from other scientific disciplines, fixed-value null hypothesis significance testing of power spectra is likely ill suited to verifying orbital forcing. In part, this is because the experiments also indicate that the combined probability of making an error in the acceptance or rejection of an orbital hypothesis may be rather high for typical stratigraphic data, and hence the use of

  13. Global Positioning Satellite Recorder

    SciTech Connect

    Reeves, George

    1997-11-10

    The GPS Tracker is a device (automotive unit) that records position (latitude and longitude), date, and time autonomously with time. The data from the GPS Tracker can be used offline with a personal computer and map data base to plot the track of where a vehicle or other mobile battery powered object has been. The invention simplifies field operations for recording location autonomously by obviating the need to execute a set of detailed instructions prior to operation. The vehicle combines GPS technology and a cpu with custom software to accomplish the task.

  14. Deep Space Positioning System

    NASA Technical Reports Server (NTRS)

    Vaughan, Andrew T. (Inventor); Riedel, Joseph E. (Inventor)

    2016-01-01

    A single, compact, lower power deep space positioning system (DPS) configured to determine a location of a spacecraft anywhere in the solar system, and provide state information relative to Earth, Sun, or any remote object. For example, the DPS includes a first camera and, possibly, a second camera configured to capture a plurality of navigation images to determine a state of a spacecraft in a solar system. The second camera is located behind, or adjacent to, a secondary reflector of a first camera in a body of a telescope.

  15. Position statement on cannabis.

    PubMed

    Stein For The Executive Committee Of The Central Drug Authority, Dan Joseph

    2016-05-16

    There is an ongoing national debate around cannabis policy. This brief position statement by the Executive Committee of the Central Drug Authorityoutlines some of the factors that have contributed to this debate, delineates reduction strategies, summarises the harms and benefits ofmarijuana, and provides recommendations. These recommendations emphasise an integrated and evidence-based approach, the need forresources to implement harm reduction strategies against continued and chronic use of alcohol and cannabis, and the potential value of afocus on decriminalisation rather than the legalisation of cannabis.

  16. Persistent direction-changing geotropic positional nystagmus.

    PubMed

    Ichijo, Hiroaki

    2012-03-01

    The aims of the study were to clarify whether persistent direction-changing geotropic positional nystagmus contains vertical and torsional components, and to quantify the asymmetry. We analyzed nystagmus in four positions (healthy-ear-down, affected-ear-down, supine, nose-down) using three-dimensional video-oculography. Subjects were 18 patients with persistent direction-changing geotropic positional nystagmus, 16 females and 2 males, with a mean age of 55 years. Nystagmus was recorded using an infrared camera and the findings were converted to digital data. Using ImageJ, we performed three-dimensional video-oculography and measured maximum slow-phase velocity (MSV) of three components. Positional nystagmus was not purely horizontal. Eight (44%) patients revealed a vertical component (upward) and 15 (83%) patients had a torsional component in the healthy-ear-down position. Seven (39%) patients revealed a vertical component (downward) and 10 (56%) patients showed a torsional component in the nose-down position. The mean value of MSV of the horizontal component in the supine position was 9.3°/s and that in the nose-down position was 15.7°/s. The latter was significantly greater than the former (p < 0.05). Eye movements in the supine position and the nose-down position were not mirror images. These results suggest that vertical and torsional components occur from the horizontal semicircular canal, and that horizontal canal ocular reflex is influenced by input from the otolithic organs.

  17. Combined additive manufacturing approaches in tissue engineering.

    PubMed

    Giannitelli, S M; Mozetic, P; Trombetta, M; Rainer, A

    2015-09-01

    Advances introduced by additive manufacturing (AM) have significantly improved the control over the microarchitecture of scaffolds for tissue engineering. This has led to the flourishing of research works addressing the optimization of AM scaffolds microarchitecture to optimally trade-off between conflicting requirements (e.g. mechanical stiffness and porosity level). A fascinating trend concerns the integration of AM with other scaffold fabrication methods (i.e. "combined" AM), leading to hybrid architectures with complementary structural features. Although this innovative approach is still at its beginning, significant results have been achieved in terms of improved biological response to the scaffold, especially targeting the regeneration of complex tissues. This review paper reports the state of the art in the field of combined AM, posing the accent on recent trends, challenges, and future perspectives.

  18. Predicting Significant Reductions in Instructional Expenditures by School Districts

    ERIC Educational Resources Information Center

    Trussel, John M.; Patrick, Patricia A.

    2012-01-01

    This article uses survival analysis to investigate the symptoms of fiscal distress that can lead to significant reductions in instructional expenditures by independent public school districts in the United States. We hypothesize that the likelihood of significant reductions in instructional expenditures is positively correlated with revenue…

  19. Clinical significance of a new autoantibody against a human eye muscle soluble antigen, detected by immunofluorescence.

    PubMed Central

    Mengistu, M; Laryea, E; Miller, A; Wall, J R

    1986-01-01

    The clinical significance of a circulating autoantibody against a recently identified soluble human eye muscle-derived antigen was studied in patients with Graves' ophthalmopathy and autoimmune thyroid disorders. Tests were positive in 73% of patients with Graves' ophthalmopathy, including six of seven with no associated thyroid disease (euthyroid Graves' disease). Tests were also positive in 27% of patients with hyperthyroidism but no clinically apparent eye disease, in 13% of patients with Hashimoto's thyroiditis without eye disease, in two of 12 patients with subacute thyroiditis, in one of 20 patients with nonimmunological thyroid disorders but in none of 39 normal subjects. There were significant positive correlations between serum levels of the antibody (expressed as a titre) and the severity of the eye muscle component quantified as an index as well as the duration of the eye disease. Antibodies were detected in three of five patients with only lid lag and state who subsequently developed active ophthalmopathy, in six of nine patients who developed eye disease after treatment of their hyperthyroidism and in one of eight first degree relatives of patients with Graves' ophthalmopathy. In addition three of the 12 patients with autoimmune thyroid disease without apparent eye involvement, but positive antibody tests, have developed ophthalmopathy since the time of testing. These findings suggest that tests for antibodies against a soluble human eye muscle antigen may be useful clinically as a diagnostic test and to predict the onset of eye disease in predisposed patients and subjects. PMID:3539423

  20. Government Positions for Physicists.

    NASA Astrophysics Data System (ADS)

    Seiler, David

    2006-03-01

    There are a number of government agencies that employ physicists in a wide variety of jobs -- from student internships to post docs to full time staff positions. You can do real, creative, fore-front physics or pursue a wide range of leadership positions. The possibilities are almost unlimited and so is the impact your work can have on the government, academia, and industry. So how do you go about finding a government job? What qualities or abilities are deemed valuable? What are the advantages and disadvantages to working in the government? I will bring some personal experiences and observations from working in the government (one year as a rotator at the National Science Foundation in the Division of Materials Research and almost 18 years at the National Institute of Standards and Technology, both as a Group Leader and a Division Chief) to bear on these questions and more. Prior to my government career I was a physics professor pursuing research and teaching in academia.

  1. Understanding cultural significance, the edible mushrooms case

    PubMed Central

    Garibay-Orijel, Roberto; Caballero, Javier; Estrada-Torres, Arturo; Cifuentes, Joaquín

    2007-01-01

    several cultural domains and showed the causes that underlie this phenomenon. This approach can be used in cross-cultural studies because it brings a list with the relative position of species among a cultural significance gradient. This list is suitable for comparisons and also it is flexible because cultural variables can be included or removed to adjust it to the nature of the different cultures or resources under study. PMID:17217539

  2. Additives In Meat and Poultry Products

    MedlinePlus

    ... What is a food additive? What is a "direct" food additive? What is an 'indirect" food additive? ... convenience foods. [ Top of Page ] What is a “direct” food additive? According to the FDA, “Direct food ...

  3. Polymer: bioceramic composites optimization by tetracycline addition.

    PubMed

    Pataro, André L; Oliveira, Michele F; Teixeira, Karina I R; Turchetti-Maia, Regina M M; Lopes, Miriam T P; Wykrota, Francisco H L; Sinisterra, Rubén D; Cortés, Maria E

    2007-05-04

    The aim of this study was to evaluate the biocompatibility of composites of poly-lactic acid polymer (PLA) and copolymer of lactic and glycolic acid (PLGA), dispersed in a bioceramic matrix, Osteosynt (BC), to which tetracycline (TC) was added. The in vitro test used direct contact test (ASTM F-813) and elution test (USP-XXIII, ISO 10993-5), and in vivo evaluation was performed after subcutaneous implantation in outbread Swiss mice. The 0.01% (w/w) TC addition did not affect composite cytotoxicity in vitro. The macroscopic and histologic evaluation in vivo after 1, 7, 13, 21, 28 and 56 days showed an initial intense infiltrate of inflammatory cells for most of the groups. The tissue showed normal pattern after 21 days for all the groups. TC addition exhibited significantly larger reduction of inflammation signs (Mann-Whitney test, p<0.05) in the critical period of the resolution of the inflammatory process. Angiogenesis, cellular adsorption and fibrous deposit were observed on SEM evaluation. In conclusion, TC addition optimized composites polymer/bioceramic biocompatibility, contributing to anti-inflammatory response during the early phases of the wound healing process.

  4. The Power of Positive Emotions

    MedlinePlus

    ... of emotion, positive or negative, we experience. How Negative Emotions Help Us Negative emotions warn us of ... to our advantage: 1. Let Positive Emotions Outnumber Negative Ones When we feel more positive emotions than ...

  5. [The significance of biobanks for clinical development].

    PubMed

    Thomas, Marlene; Kiermaier, Astrid; Cannarile, Michael

    2016-03-01

    Access to samples in biobanks and collection of samples for evaluation of biomarkers in clinical trials are an essential basis for the identification and development of biomarkers. From the perspective of a research-based pharmaceutical company identification of biomarkers and the accompanying diagnostics are an essential prerequisite for the further evolution of personalised healthcare-and the key to more effective and efficient healthcare. Research-based pharmaceutical companies can basically use four types of biobanks: biobanks of university hospitals, commercial providers, collaborative groups and company-owned biobanks. Areas of application, arising from the use of biobanks in the context of clinical development, are collection of prevalence data, evaluation of biomarker stability in different disease stages, technical validation of assays, an optimized course of clinical studies by focusing on defined, biomarker-stratified groups of patients and pharmacogenetic research. Challenges are, in particular, the availability of clinically annotated samples and tissue matching blood samples, in addition to sample quality, number and amount. An acceptable legal and regulatory framework, as well as the positive perception of biomarker data by politicians and the public, are important prerequisites for translational research for identification of biomarkers in clinical studies. Also, the early establishment of research alliances between academia and the pharmaceutical industry are required to transfer research results in new strategies for prevention, diagnosis and treatment of patients.

  6. Beyond complete positivity

    NASA Astrophysics Data System (ADS)

    Dominy, Jason M.; Lidar, Daniel A.

    2016-04-01

    We provide a general and consistent formulation for linear subsystem quantum dynamical maps, developed from a minimal set of postulates, primary among which is a relaxation of the usual, restrictive assumption of uncorrelated initial system-bath states. We describe the space of possibilities admitted by this formulation, namely that, far from being limited to only completely positive (CP) maps, essentially any C-linear, Hermiticity-preserving, trace-preserving map can arise as a legitimate subsystem dynamical map from a joint unitary evolution of a system coupled to a bath. The price paid for this added generality is a trade-off between the set of admissible initial states and the allowed set of joint system-bath unitary evolutions. As an application, we present a simple example of a non-CP map constructed as a subsystem dynamical map that violates some fundamental inequalities in quantum information theory, such as the quantum data processing inequality.

  7. Inductive Position Sensor

    NASA Technical Reports Server (NTRS)

    Youngquist, Robert C. (Inventor); Simmons, Stephen M. (Inventor)

    2015-01-01

    An inductive position sensor uses three independent inductors inductively coupled by a common medium such as air. First and second inductors are separated by a fixed distance with the first inductor's axial core and second inductor's axial core maintained parallel to one another. A third inductor is disposed between the first and second inductors with the third inductor's axial core being maintained parallel to those of the first and second inductors. The combination of the first and second inductors are configured for relative movement with the third inductor's axial core remaining parallel to those of the first and second inductors as distance changes from the third inductor to each of the first inductor and second inductor. An oscillating current can be supplied to at least one of the three inductors, while voltage induced in at least one of the three inductors not supplied with the oscillating current is measured.

  8. Solar system positioning system

    NASA Technical Reports Server (NTRS)

    Penanen, Konstantin I.; Chui, Talso

    2006-01-01

    Power-rich spacecraft envisioned in Prometheus initiative open up possibilities for long-range high-rate communication. A constellation of spacecraft on orbits several A.U. from the Sun, equipped with laser transponders and precise clocks can be configured to measure their mutual distances to within few cm. High on-board power can create substantial non-inertial contribution to the spacecraft trajectory. We propose to alleviate this contribution by employing secondary ranging to a passive daughter spacecraft. Such constellation can form the basis of it navigation system capable of providing position information anywhere in the soIar system with similar accuracy. Apart from obvious Solar System exploration implications, this system can provide robust reference for GPS and its successors.

  9. Metallic positive expulsion diaphragms

    NASA Technical Reports Server (NTRS)

    Gleich, D.

    1972-01-01

    High-cycle life ring-reinforced hemispherical type positive expulsion diaphragm performance was demonstrated by room temperature fluid expulsion tests of 13" diameter, 8 mil thick stainless steel configurations. A maximum of eleven (11) leak-free, fluid expulsions were achieved by a 25 deg cone angle diaphragm hoop-reinforced with .110-inch cross-sectional diameter wires. This represents a 70% improvement in diaphragm reversal cycle life compared to results previously obtained. The reversal tests confirmed analytic predictions for diaphragm cycle life increases due to increasing values of diaphragm cone angle, radius to thickness ratio and material strain to necking capacity. Practical fabrication techniques were demonstrated for forming close-tolerance, thin corrugated shells and for obtaining closely controlled reinforcing ring stiffness required to maximize diaphragm cycle life. A non-destructive inspection technique for monitoring large local shell bending strains was developed.

  10. The Global Positioning System

    USGS Publications Warehouse

    ,

    1999-01-01

    The Global Positioning System (GPS) is a constellation of navigation satellites called Navigation Satellite Timing And Ranging (NAVSTAR), maintained by the U.S. Department of Defense. Many outdoor enthusiasts recognize that a handheld GPS receiver can be an accurate tool for determining their location on the terrain. The GPS receiver helps determine locations on the Earth's surface by collecting signals from three or more satellites through a process called triangulation. Identifying a location on the Earth is more useful if you also know about the surrounding topographic conditions. Using a topographic map with the GPS receiver provides important information about features of the surrounding terrain and can help you plot an effective route from one location to another.

  11. Satellite positioning systems

    NASA Astrophysics Data System (ADS)

    Keydel, W.

    The basic physical principles, technology, and capabilities of satellite position-finding systems (SPFSs) are examined in a general overview. Topics discussed include the properties of EM waves as a basis for measurement; two-way (radar) SPFSs with active satellites (to locate passive targets); one-way SPFSs with active satellites (for self-location using a passive receiver); one-way SPFSs with passive satellites and active objects (for emergency search-and-rescue use); radar altimeters, radar scatterometers, and SARs; Doppler methods; and range-difference and pseudorange time-of-flight methods. Consideration is given to problems of precision in time measurements and orbit measurement and prediction, improved precision using differential methods, the predicted accuracy of Navstar GPS, propagation-related limitations, user demands, and political and economic factors influencing future SPFS development.

  12. Inductive Position Sensor

    NASA Technical Reports Server (NTRS)

    Youngquist, Robert C. (Inventor); Simmons, Stephen M. (Inventor)

    2015-01-01

    An inductive position sensor uses three parallel inductors, each of which has an axial core that is an independent magnetic structure. A first support couples first and second inductors and separate them by a fixed distance. A second support coupled to a third inductor disposed between the first and second inductors. The first support and second support are configured for relative movement as distance changes from the third inductor to each of the first and second inductors. An oscillating current is supplied to the first and second inductors. A device measures a phase component of a source voltage generating the oscillating current and a phase component of voltage induced in the third inductor when the oscillating current is supplied to the first and second inductors such that the phase component of the voltage induced overlaps the phase component of the source voltage.

  13. Group Interaction Sustains Positive Moods and Diminishes Negative Moods.

    PubMed

    Park, Ernest S; Hinsz, Verlin B

    2015-12-01

    The social interactions of task groups were investigated for their influences on member moods. Initially, participants' received an induction of positive, negative, or neutral moods via listening to music that continued throughout the experimental session. Moods were measured after the induction. Students then made decisions on four choice dilemmas alone or as members of a four-person group. Subsequently, positive and negative moods were again measured. Positive moods of participants who worked with other group members on the task were sustained, but diminished for those working alone. Negative moods of participants working in groups diminished over time, but were sustained for those working individually. These results were interpreted in the context of motivational systems theory of group involvement (Park & Hinsz, 2006). Additionally, although there was a tendency for member moods to homogenize over assessments, this did not reach significance. Results document the affective benefits that often accompany task group interaction suggesting that group interaction has features of positive mood induction. This report highlights the need to consider social influences on affect in task settings so that group dynamics, processes, and behaviors can be better understood.

  14. The influence of positive vs. negative affect on multitasking.

    PubMed

    Morgan, Brent; D'Mello, Sidney K

    2016-10-01

    Considerable research has investigated how affect influences performance on a single task; however, little is known about the role of affect in complex multitasking environments. In this paper, 178 participants multitasked in a synthetic work environment (SYNWORK) consisting of memory, visual monitoring, auditory monitoring, and math tasks. Participants multitasked for a 3-min baseline phase (MT1), following which they were randomly assigned to watch one of three affect-induction videos: positive, neutral, or negative. Participants then resumed multitasking for two additional critical phases (MT2, MT3; 3min each). In MT2, performance of the positive and neutral conditions was statistically equivalent and higher than the negative condition. In MT3, the positive condition performed better than the negative condition, with the neutral condition not significantly different from the other two. The differences in overall multitasking scores were largely driven by errors in the Math task (the most cognitively demanding task) in MT2 and the Memory task in MT3. These findings have implications for how positive and negative affective states influence processing in a cognitively demanding multitasking environment.

  15. JASMINE position reconstruction

    NASA Astrophysics Data System (ADS)

    Gouda, N.; Kobayashi, Y.; Yamada, Y.; Yano, T.; Jasmine Working Group

    We introduce a Japanese plan of infrared space astrometry JASMINE-project operating at z-band whose central wavelength is 0 9 micron JASMINE is the satellite Japan Astrometry Satellite Mission for INfrared Exploration which will measure the distances and apparent motions of stars in the Milky Way with yet unprecedented precision It will measure parallaxes positions with the accuracy of 10 micro-arcsec and proper motions with the accuracy of 10 micro-arcsec year for stars brighter than z 14mag JASMINE can observe about ten million stars belonging to the bulge components of our Galaxy which are hidden by the interstellar dust extinction in optical bands Number of stars with sigma pi 0 1 in the direction of the Galactic central bulge is about 1000 times larger than those observed in optical bands where pi is a parallax and sigma is an error of the parallax With the completely new map of the Milky Way it is expected that many new exciting scientific results will be obtained in various fields of astronomy Presently JASMINE is in a development phase with a target launch date around 2015 We adopt the following instrument design of JASMINE in order to get the accurate positions of many stars We adopt a 3-mirrors optical system modified Korsch system with a primary mirror of 1m On the astro-focal plane we put dozens of new type of CCDs for z-band to get a wide field of view The accurate measurements of the astrometric parameters requires the instrument line-of-sight highly stability and the opto-mechanical highly stability of the payload in the JASMINE

  16. Positive correlations between corpus callosum thickness and intelligence.

    PubMed

    Luders, Eileen; Narr, Katherine L; Bilder, Robert M; Thompson, Paul M; Szeszko, Philip R; Hamilton, Liberty; Toga, Arthur W

    2007-10-01

    Callosal morphology is thought to reflect the capacity for inter-hemispheric communication and thus, in addition to other cerebral characteristics, may serve as a neuroanatomical substrate of general intellectual capacity. We applied novel computational mesh-based methods to establish the presence and direction of correlations between intelligence and callosal thickness at high spatial resolution while removing the variance associated with overall brain size. Within healthy subjects (n=62), and within males (n=28) and females (n=34) separately, we observed significant positive correlations between callosal morphology and intelligence measures (full-scale, performance, and verbal). These relationships were pronounced in posterior callosal sections and were confirmed by permutation testing. Significant negative correlations were absent. Positive associations between intelligence and posterior callosal thickness may reflect a more efficient inter-hemispheric information transfer, positively affecting information processing and integration, and thus intellectual performance. At the same time, regional variations in callosal size might also partly reflect the underlying architecture of topographically connected cortical regions relevant for processing higher-order cognitive information. Our findings emphasize the importance of incorporating posterior (callosal) regions into the theories and models proposed to explain the anatomical substrates of intelligence.

  17. Preclinical pathways to treatment in infants with positional cranial deformity.

    PubMed

    Kluba, S; Lypke, J; Kraut, W; Krimmel, M; Haas-Lude, K; Reinert, S

    2014-10-01

    Positional plagiocephaly in infants is frequent. As well as positioning, physiotherapy, and osteopathy, helmet therapy is an effective treatment option. The outcome also depends on the timely initiation of treatment. We investigated the preclinical pathways to treatment. Parents of 218 affected children were interviewed. Data were collected regarding detection and the treatments used prior to the first craniofacial consultation at the study clinic in Germany. Descriptive and statistical analyses were performed. For 78.4% of the children, the cranial deformities were first detected at ≤4 months of age. One hundred and twenty-two children received helmet therapy. Parents consulted the paediatrician with a mean latency of 0.4 months; 3.3 months passed until the first craniofacial consultation. Approximately 90% were treated with repositioning and 75.2% received additional physiotherapy or osteopathy prior to presentation. Children treated with physiotherapy/osteopathy presented significantly later (P=0.023). The time lapse to craniofacial consultation was not significantly different between children with and without later helmet therapy. We identified a relevant delay between the detection of positional cranial deformity and consultation with a craniofacial specialist. For affected children, this may potentially compromise the outcome of helmet therapy. Early referral to a specialist and if necessary the simultaneous application of different treatments should be preferred.

  18. Minimum Additive Waste Stabilization (MAWS). Technology summary

    SciTech Connect

    Not Available

    1994-02-01

    In the Minimum Additive Waste Stabilization(MAWS) concept, actual waste streams are utilized as additive resources for vitrification, which may contain the basic components (glass formers and fluxes) for making a suitable glass or glassy slag. If too much glass former is present, then the melt viscosity or temperature will be too high for processing; while if there is too much flux, then the durability may suffer. Therefore, there are optimum combinations of these two important classes of constituents depending on the criteria required. The challenge is to combine these resources in such a way that minimizes the use of non-waste additives yet yields a processable and durable final waste form for disposal. The benefit to this approach is that the volume of the final waste form is minimized (waste loading maximized) since little or no additives are used and vitrification itself results in volume reduction through evaporation of water, combustion of organics, and compaction of the solids into a non-porous glass. This implies a significant reduction in disposal costs due to volume reduction alone, and minimizes future risks/costs due to the long term durability and leach resistance of glass. This is accomplished by using integrated systems that are both cost-effective and produce an environmentally sound waste form for disposal. individual component technologies may include: vitrification; thermal destruction; soil washing; gas scrubbing/filtration; and, ion-exchange wastewater treatment. The particular combination of technologies will depend on the waste streams to be treated. At the heart of MAWS is vitrification technology, which incorporates all primary and secondary waste streams into a final, long-term, stabilized glass wasteform. The integrated technology approach, and view of waste streams as resources, is innovative yet practical to cost effectively treat a broad range of DOE mixed and low-level wastes.

  19. Supplier Selection Using Weighted Utility Additive Method

    NASA Astrophysics Data System (ADS)

    Karande, Prasad; Chakraborty, Shankar

    2015-10-01

    Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

  20. Transient design of landfill liquid addition systems.

    PubMed

    Jain, Pradeep; Townsend, Timothy G; Tolaymat, Thabet M

    2014-09-01

    This study presents the development of design charts that can be used to estimate lateral and vertical spacing of liquids addition devices (e.g., vertical well, horizontal trenches) and the operating duration needed for transient operating conditions (conditions until steady-state operating conditions are achieved). These design charts should be used in conjunction with steady-state design charts published earlier by Jain et al. (2010a, 2010b). The data suggest that the liquids addition system operating time can be significantly reduced by utilizing moderately closer spacing between liquids addition devices than the spacing needed for steady-state conditions. These design charts can be used by designers to readily estimate achievable flow rate and lateral and vertical extents of the zone of impact from liquid addition devices, and analyze the sensitivity of various input variables (e.g., hydraulic conductivity, anisotropy, well radius, screen length) to the design. The applicability of the design charts, which are developed based on simulations of a continuously operated system, was also evaluated for the design of a system that would be operated intermittently (e.g., systems only operated during facility operating hours). The design charts somewhat underestimates the flow rate achieved and overestimates the lateral extent of the zone of impact over an operating duration for an intermittently operated system. The associated estimation errors would be smaller than the margin of errors associated with measurement of other key design inputs such as waste properties (e.g., hydraulic conductivity) and wider variation of these properties at a given site due to heterogeneous nature of waste.

  1. Basophil activation test with food additives in chronic urticaria patients.

    PubMed

    Kang, Min-Gyu; Song, Woo-Jung; Park, Han-Ki; Lim, Kyung-Hwan; Kim, Su-Jung; Lee, Suh-Young; Kim, Sae-Hoon; Cho, Sang-Heon; Min, Kyung-Up; Chang, Yoon-Seok

    2014-01-01

    The role of food additives in chronic urticaria (CU) is still under investigation. In this study, we aimed to explore the association between food additives and CU by using the basophil activation test (BAT). The BAT using 15 common food additives was performed for 15 patients with CU who had a history of recurrent urticarial aggravation following intake of various foods without a definite food-specific IgE. Of the 15 patients studied, two (13.3%) showed positive BAT results for one of the tested food additives. One patient responded to monosodium glutamate, showing 18.7% of CD203c-positive basophils. Another patient showed a positive BAT result to sodium benzoate. Both patients had clinical correlations with the agents, which were partly determined by elimination diets. The present study suggested that at least a small proportion of patients with CU had symptoms associated with food additives. The results may suggest the potential utility of the BAT to identity the role of food additives in CU.

  2. Position-dependent effects of polylysine on Sec protein transport.

    PubMed

    Liang, Fu-Cheng; Bageshwar, Umesh K; Musser, Siegfried M

    2012-04-13

    The bacterial Sec protein translocation system catalyzes the transport of unfolded precursor proteins across the cytoplasmic membrane. Using a recently developed real time fluorescence-based transport assay, the effects of the number and distribution of positive charges on the transport time and transport efficiency of proOmpA were examined. As expected, an increase in the number of lysine residues generally increased transport time and decreased transport efficiency. However, the observed effects were highly dependent on the polylysine position in the mature domain. In addition, a string of consecutive positive charges generally had a more significant effect on transport time and efficiency than separating the charges into two or more charged segments. Thirty positive charges distributed throughout the mature domain resulted in effects similar to 10 consecutive charges near the N terminus of the mature domain. These data support a model in which the local effects of positive charge on the translocation kinetics dominate over total thermodynamic constraints. The rapid translocation kinetics of some highly charged proOmpA mutants suggest that the charge is partially shielded from the electric field gradient during transport, possibly by the co-migration of counter ions. The transport times of precursors with multiple positively charged sequences, or "pause sites," were fairly well predicted by a local effect model. However, the kinetic profile predicted by this local effect model was not observed. Instead, the transport kinetics observed for precursors with multiple polylysine segments support a model in which translocation through the SecYEG pore is not the rate-limiting step of transport.

  3. Impact of mass addition on extreme water level statistics during storms along the coast of the Mediterranean Sea

    NASA Astrophysics Data System (ADS)

    Lionello, Piero; Conte, Dario; Marzo, Luigi; Scarascia, Luca

    2015-04-01

    In the Mediterranean Sea there are two contrasting factors affecting the maximum level that water will reach during a storm in the next decades: the increase of mean sea level and the decrease of storminess. Future reduction of storminess, which is associated with a decreased intensity of the Mediterranean branch on the north hemisphere storm track, will determine a reduction of maxima of wind wave height and storm surge levels. Changes of mean sea level are produced by regional steric effects and by net mass addition. While it is possible to compute the steric effects with regional models, mass addition is ultimately the consequence of a remote cause: the melting of Greenland and Antarctica ice caps. This study considers four indicators of extreme water levels, which, ranked in order of increasing values: the average of the 10 largest annual maxima (wlind10), the largest annual maximum (wlind1), the 5 (rv5) and 50 (rv50) year return level. The analysis is based on a coordinated set of wave and storm surge simulation forced by inputs provided by regional climate model simulations that were carried out in the CIRCE EU-fp7 and cover the period 1951-2050. Accounting for all affecting factors but the mass addition, in about 60% of the Mediterranean coast reduced storminess and steric expansion will compensate each other and produce no significant change of maximum water level statistics. The remaining 40% of the coastline is almost equally divided between significant positive and negative changes. However, if a supplementary sea level increase, representing the effect of water mass addition, is added, the fraction of the coast with significant positive/negative changes increase/decrease quickly. If mass addition would contribute 10cm, there will be no significant negative changes and for any indicator. With a 20cm addition the increase would be significant for wlind10, wlind1, rv5 along more than 75% of the Mediterranean coastline. With a 35cm addition the increase

  4. Effects of litter addition on ectomycorrhizal associates of a lodgepole pine (Pinus contorta) stand in Yellowstone National Park

    NASA Technical Reports Server (NTRS)

    Cullings, Kenneth W.; New, Michael H.; Makhija, Shilpa; Parker, V. Thomas

    2003-01-01

    Increasing soil nutrients through litter manipulation, pollution, or fertilization can adversely affect ectomycorrhizal (EM) communities by inhibiting fungal growth. In this study, we used molecular genetic methods to determine the effects of litter addition on the EM community of a Pinus contorta stand in Yellowstone National Park that regenerated after a stand-replacing fire. Two controls were used; in unmodified control plots nothing was added to the soil, and in perlite plots perlite, a chemically neutral substance, was added to maintain soil moisture and temperature at levels similar to those under litter. We found that (i) species richness did not change significantly following perlite addition (2.6 +/- 0.3 species/core in control plots, compared with 2.3 +/- 0.3 species/core in perlite plots) but decreased significantly (P < 0.05) following litter addition (1.8 +/- 0.3 species/core); (ii) EM infection was not affected by the addition of perlite but increased significantly (P < 0.001) in response to litter addition, and the increase occurred only in the upper soil layer, directly adjacent to the added litter; and (iii) Suillus granulatus, Wilcoxina mikolae, and agaricoid DD were the dominant organisms in controls, but the levels of W. mikolae and agaricoid DD decreased significantly in response to both perlite and litter addition. The relative levels of S. granulatus and a fourth fungus, Cortinariaceae species 2, increased significantly (P < 0.01 and P < 0.05, respectively) following litter addition. Thus, litter addition resulted in some negative effects that may be attributable to moisture-temperature relationships rather than to the increased nutrients associated with litter. Some species respond positively to litter addition, indicating that there are differences in their physiologies. Hence, changes in the EM community induced by litter accumulation also may affect ecosystem function.

  5. Clinical significance of lymphadenectomy in patients with gastric cancer

    PubMed Central

    Tóth, Dezső; Plósz, János; Török, Miklós

    2016-01-01

    Approximately thirty percent of patients with gastric cancer undergo an avoidable lymph node dissection with a higher rate of postoperative complication. Comparing the D1 and D2 dissections, it was found that there is a significant difference in morbidity, favoured D1 dissection without any difference in overall survival. Subgroup analysis of patients with T3 tumor shows a survival difference favoring D2 lymphadenectomy, and there is a better gastric cancer-related death and non-statistically significant improvement of survival for node-positive disease in patients with D2 dissection. However, the extended lymphadenectomy could improve stage-specific survival owing to the stage migration phenomenon. The deployment of centralization and application of national guidelines could improve the surgical outcomes. The Japanese and European guidelines enclose the D2 lymphadenectomy as the gold standard in R0 resection. In the individualized, stage-adapted gastric cancer surgery the Maruyama computer program (MCP) can estimate lymph node involvement preoperatively with high accuracy and in addition the Maruyama Index less than 5 has a better impact on survival, than D-level guided surgery. For these reasons, the preoperative application of MCP is recommended routinely, with an aim to perform “low Maruyama Index surgery”. The sentinel lymph node biopsy (SNB) may decrease the number of redundant lymphadenectomy intraoperatively with a high detection rate (93.7%) and an accuracy of 92%. More accurate stage-adapted surgery could be performed using the MCP and SNB in parallel fashion in gastric cancer. PMID:26909128

  6. Reduction of EAO Positional Observations Database

    NASA Astrophysics Data System (ADS)

    Nefedyev, Yuri; Andreev, Alexey; Demina, Natalya; Churkin, Konstantin

    2016-07-01

    their proper motions is 2.5 mas/yr. The mean (O-C) values for Pluto were calculated for observations taken between 1985 and 1991. However, if we look at the period of 1988-1991 in detail, the values of (O-C)_{α} for Pluto with the Tycho-2 catalogue increase from 1,32" to 2,25". The values of (O-C)_{δ} are in the limits of -0,41" to -0,57". The large (O - C) values for Pluto in both coordinates can be explained by the uncertainties of its ephemeredes and probably by the oscillations of the photometric centre of the Pluto-Charon system. Similar results had been obtained earlier at EAO and Pulkovo observatory. The values of (O - C) for the other planets are within the accuracy of the positional method of observation. Positions of Venus, Mars, Saturn, Uranus, Neptune and Pluto in the system of the Tycho-2 catalogue were obtained. The coordinates of the planets are apparent exceptfor Pluto. In addition the work has been compared by the accuracy with the results obtained with using catalogues PPM and Tycho-2. The accuracy of the reduction of EAO planet observations based on the Tycho-2 catalogue is higher than that of the reduction with the PPM catalogues especially in right ascension. That is not surprising, since both the systematical and random errors are smaller in the Tycho-2 catalogue. We consider this demonstrates that rereduction of positional observations with improved catalogues can significantly improve the accuracy, and therefore the value, of old, and in the case of planets - unrepeatable, observations. At the present time at EAO there is a glass library which contains a large archive of photographic plates, covering the period of more than 90 years, and obtained by different telescopes:1) A photographic survey of the sky (FON) 30X30 - 1746 plates;2) Photographic catalogue (size 30X30) - 700 plates;3) The Moon with Stars - 612 plates;4) Positive images - 272 plates;5) Comets, asteroids, moons - 159 plates;Schmidt Telescope:6) Selected Areas of Kapteyn - 1500

  7. Subject position affects EEG magnitudes.

    PubMed

    Rice, Justin K; Rorden, Christopher; Little, Jessica S; Parra, Lucas C

    2013-01-01

    EEG (electroencephalography) has been used for decades in thousands of research studies and is today a routine clinical tool despite the small magnitude of measured scalp potentials. It is widely accepted that the currents originating in the brain are strongly influenced by the high resistivity of skull bone, but it is less well known that the thin layer of CSF (cerebrospinal fluid) has perhaps an even more important effect on EEG scalp magnitude by spatially blurring the signals. Here it is shown that brain shift and the resulting small changes in CSF layer thickness, induced by changing the subject's position, have a significant effect on EEG signal magnitudes in several standard visual paradigms. For spatially incoherent high-frequency activity the effect produced by switching from prone to supine can be dramatic, increasing occipital signal power by several times for some subjects (on average 80%). MRI measurements showed that the occipital CSF layer between the brain and skull decreases by approximately 30% in thickness when a subject moves from prone to supine position. A multiple dipole model demonstrated that this can indeed lead to occipital EEG signal power increases in the same direction and order of magnitude as those observed here. These results suggest that future EEG studies should control for subjects' posture, and that some studies may consider placing their subjects into the most favorable position for the experiment. These findings also imply that special consideration should be given to EEG measurements from subjects with brain atrophy due to normal aging or neurodegenerative diseases, since the resulting increase in CSF layer thickness could profoundly decrease scalp potential measurements.

  8. Different responses of soil respiration and its components to nitrogen addition among biomes: a meta-analysis.

    PubMed

    Zhou, Lingyan; Zhou, Xuhui; Zhang, Baocheng; Lu, Meng; Luo, Yiqi; Liu, Lingli; Li, Bo

    2014-07-01

    Anthropogenic activities have increased nitrogen (N) deposition by threefold to fivefold over the last century, which may considerably affect soil respiration (Rs). Although numerous individual studies and a few meta-analyses have been conducted, it remains controversial as to how N addition affects Rs and its components [i.e., autotrophic (Ra) and heterotrophic respiration (Rh)]. To reconcile the difference, we conducted a comprehensive meta-analysis of 295 published studies to examine the responses of Rs and its components to N addition in terrestrial ecosystems. We also assessed variations in their responses in relation to ecosystem types, environmental conditions, and experimental duration (DUR). Our results show that N addition significantly increased Rs by 2.0% across all biomes but decreased by 1.44% in forests and increased by 7.84% and 12.4% in grasslands and croplands, respectively (P < 0.05). The differences may largely result from diverse responses of Ra to N addition among biomes with more stimulation of Ra in croplands and grasslands compared with no significant change in forests. Rh exhibited a similar negative response to N addition among biomes except that in croplands, tropical and boreal forests. Methods of partitioning Rs did not induce significant differences in the responses of Ra or Rh to N addition, except that Ra from root exclusion and component integration methods exhibited the opposite responses in temperate forests. The response ratios (RR) of Rs to N addition were positively correlated with mean annual temperature (MAT), with being more significant when MAT was less than 15 °C, but negatively with DUR. In addition, the responses of Rs and its components to N addition largely resulted from the changes in root and microbial biomass and soil C content as indicated by correlation analysis. The response patterns of Rs to N addition as revealed in this study can be benchmarks for future modeling and experimental studies.

  9. Accentuate the Positive: The Relationship between Positive Explanatory Style and Academic Achievement of Prospective Elementary Teachers

    ERIC Educational Resources Information Center

    Boyer, Wanda

    2006-01-01

    This research examines 480 current event-explanation units using the CAVE technique (Schulman, Castellon, & Seligman, 1989) to note the relationship between positive and negative explanatory style and achievement of prospective early childhood and upper elementary female teachers. This study found a significant positive relationship between…

  10. Finding of No Significant Impact: Environmental Assessment Construction of Hangar Addition Building 820 Tinker Air Force Base, Oklahoma

    DTIC Science & Technology

    2012-03-06

    Haza rdous materia ls are used by military personnel and on-base contractors throughout the base. The location of hazardous materials, procedures and...implemented by the DoD to identify and evaluate areas and constituents o f concern of toxic and hazardous materia l disposal and spill sites. Once the areas...to hazardous materia ls and wastes, including ERP sites. 4.2.6.1 Haza1·dous Materials 4.2.6.1.1 Preferred Alternative Construction Impacts: The

  11. The improvement of the Pluto orbit using additional new data

    NASA Astrophysics Data System (ADS)

    Girdiuk, A.

    2015-08-01

    Observational series of the Pluto dwarf planet have started since 1913. At this moment observations have covered only a third of the Pluto orbit, therefore, the Pluto orbital elements are defined with insufficient accuracy. A growing number of observations leads to the improvement of the accuracy of the orbit determination. The database of the Pluto's observations was expanded with the help of about 350 observations during 1930-1996 obtained at the Pulkovo Observatory, and about 5500 observations (1995-2013) including occultation data from Brazilian colleagues obtained at the European Southern Observatory and the Pico dos Dias Observatory, and the new analyzed 469 historical photographic observations archived at Lowell Observatory. The new cross-platform software ERA-8 has been developed in IAA RAS and has been used for implementation of all mathematical procedures for constructing Pluto orbit. The modern ephemerides (EPM2011, EPM2013, DE430, DE432, INPOP13c) are chosen for comparison of the ephemeris positions: equatorial coordinates and heliocentric distance. The main result of the work - construction of ephemerides EPM2014a is a significant improvement of the Pluto's orbit using additional observations.

  12. [Allergic contact dermatitis as a consequence of additional occupations].

    PubMed

    Paravina, M; Stanojević, M; Spalević, Lj; Jovanović, D

    1994-01-01

    During discovering etiology of allergic contact dermatitis (ACD) anamnesis is of great importance (date of life, profession of a patients, activities besides the profession, habits, hobbies). Many people have additional professions, habits, hobbies). Many people have additional professions, either as hobbies or as financial reasons. They can show senzibilization to substances they come to contact with. The aim of this work is to point to this possibility of generating ACD. Five petients suffering from ACD were presented. All of them were tested by standard series and by substances thej came to contact with, while going in for additional occupations. 1. A metalsmith, going in for beekeeping, had positive tests to propolis and balsam of Peru. 2. A construction worker growing fruit, hat positive tests to TMT and fingicid melpreks. 3. Stics weaver, engaging in constructions work, had positive tests to potassium bichromate. 4. Retired professor in matematics, engaged in constructions works, had positive tests to potassium bichromate, too. 5. A law student, going in for photography, had positive tests to colour film developer. The nature of allergens, length of exposure, possibilites for elimination of allergens, means of protection etc have been discussed. It was conslused that a detail examination of patients was necessary for proving causes of ACD.

  13. Metal-air cell with performance enhancing additive

    DOEpatents

    Friesen, Cody A; Buttry, Daniel

    2015-11-10

    Systems and methods drawn to an electrochemical cell comprising a low temperature ionic liquid comprising positive ions and negative ions and a performance enhancing additive added to the low temperature ionic liquid. The additive dissolves in the ionic liquid to form cations, which are coordinated with one or more negative ions forming ion complexes. The electrochemical cell also includes an air electrode configured to absorb and reduce oxygen. The ion complexes improve oxygen reduction thermodynamics and/or kinetics relative to the ionic liquid without the additive.

  14. Positive Emotional Language in the Final Words Spoken Directly Before Execution.

    PubMed

    Hirschmüller, Sarah; Egloff, Boris

    2015-01-01

    How do individuals emotionally cope with the imminent real-world salience of mortality? DeWall and Baumeister as well as Kashdan and colleagues previously provided support that an increased use of positive emotion words serves as a way to protect and defend against mortality salience of one's own contemplated death. Although these studies provide important insights into the psychological dynamics of mortality salience, it remains an open question how individuals cope with the immense threat of mortality prior to their imminent actual death. In the present research, we therefore analyzed positivity in the final words spoken immediately before execution by 407 death row inmates in Texas. By using computerized quantitative text analysis as an objective measure of emotional language use, our results showed that the final words contained a significantly higher proportion of positive than negative emotion words. This emotional positivity was significantly higher than (a) positive emotion word usage base rates in spoken and written materials and (b) positive emotional language use with regard to contemplated death and attempted or actual suicide. Additional analyses showed that emotional positivity in final statements was associated with a greater frequency of language use that was indicative of self-references, social orientation, and present-oriented time focus as well as with fewer instances of cognitive-processing, past-oriented, and death-related word use. Taken together, our findings offer new insights into how individuals cope with the imminent real-world salience of mortality.

  15. Positive Emotional Language in the Final Words Spoken Directly Before Execution

    PubMed Central

    Hirschmüller, Sarah; Egloff, Boris

    2016-01-01

    How do individuals emotionally cope with the imminent real-world salience of mortality? DeWall and Baumeister as well as Kashdan and colleagues previously provided support that an increased use of positive emotion words serves as a way to protect and defend against mortality salience of one’s own contemplated death. Although these studies provide important insights into the psychological dynamics of mortality salience, it remains an open question how individuals cope with the immense threat of mortality prior to their imminent actual death. In the present research, we therefore analyzed positivity in the final words spoken immediately before execution by 407 death row inmates in Texas. By using computerized quantitative text analysis as an objective measure of emotional language use, our results showed that the final words contained a significantly higher proportion of positive than negative emotion words. This emotional positivity was significantly higher than (a) positive emotion word usage base rates in spoken and written materials and (b) positive emotional language use with regard to contemplated death and attempted or actual suicide. Additional analyses showed that emotional positivity in final statements was associated with a greater frequency of language use that was indicative of self-references, social orientation, and present-oriented time focus as well as with fewer instances of cognitive-processing, past-oriented, and death-related word use. Taken together, our findings offer new insights into how individuals cope with the imminent real-world salience of mortality. PMID:26793135

  16. Positional cloning by linkage disequilibrium.

    PubMed

    Maniatis, Nikolas; Collins, Andrew; Gibson, Jane; Zhang, Weihua; Tapper, William; Morton, Newton E

    2004-05-01

    Recently, metric linkage disequilibrium (LD) maps that assign an LD unit (LDU) location for each marker have been developed (Maniatis et al. 2002). Here we present a multiple pairwise method for positional cloning by LD within a composite likelihood framework and investigate the operating characteristics of maps in physical units (kb) and LDU for two bodies of data (Daly et al. 2001; Jeffreys et al. 2001) on which current ideas of blocks are based. False-negative indications of a disease locus (type II error) were examined by selecting one single-nucleotide polymorphism (SNP) at a time as causal and taking its allelic count (0, 1, or 2, for the three genotypes) as a pseudophenotype, Y. By use of regression and correlation, association between every pseudophenotype and the allelic count of each SNP locus (X) was based on an adaptation of the Malecot model, which includes a parameter for location of the putative gene. By expressing locations in kb or LDU, greater power for localization was observed when the LDU map was fitted. The efficiency of the kb map, relative to the LDU map, to describe LD varied from a maximum of 0.87 to a minimum of 0.36, with a mean of 0.62. False-positive indications of a disease locus (type I error) were examined by simulating an unlinked causal SNP and the allele count was used as a pseudophenotype. The type I error was in good agreement with Wald's likelihood theorem for both metrics and all models that were tested. Unlike tests that select only the most significant marker, haplotype, or haploset, these methods are robust to large numbers of markers in a candidate region. Contrary to predictions from tagging SNPs that retain haplotype diversity, the sample with smaller size but greater SNP density gave less error. The locations of causal SNPs were estimated with the same precision in blocks and steps, suggesting that block definition may be less useful than anticipated for mapping a causal SNP. These results provide a guide to efficient

  17. 78 FR 66105 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-04

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entities whose property and interests in property have been blocked pursuant to the Foreign Narcotics... program targeting the activities of significant foreign narcotics traffickers and their organizations on...

  18. 77 FR 22846 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-17

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property has been blocked pursuant to the Foreign Narcotics Kingpin Designation... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  19. 78 FR 8701 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-06

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entity whose property and interests in property have been blocked pursuant to the Foreign Narcotics... program targeting the activities of significant foreign narcotics traffickers and their organizations on...

  20. 75 FR 65554 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-25

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... interests in property has been blocked pursuant to the Foreign Narcotics Kingpin Designation Act (``Kingpin..., 1999. The Kingpin Act establishes a program targeting the activities of significant foreign...

  1. 77 FR 58912 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entity whose property and interests in property have been blocked pursuant to the Foreign Narcotics... program targeting the activities of significant foreign narcotics traffickers and their organizations on...

  2. 77 FR 36041 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-15

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  3. 77 FR 838 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-06

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entities) whose property and interests in property have been blocked pursuant to the Foreign Narcotics... program targeting the activities of significant foreign narcotics traffickers and their organizations on...

  4. 77 FR 69706 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-20

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entities whose property and interests in property have been blocked pursuant to the Foreign Narcotics... program targeting the activities of significant foreign narcotics traffickers and their organizations on...

  5. 75 FR 64781 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-20

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... interests in property have been blocked pending investigation pursuant to the Foreign Narcotics Kingpin... the activities of significant foreign narcotics traffickers and their organizations on a...

  6. 78 FR 29814 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-21

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property has been blocked pursuant to the Foreign Narcotics Kingpin Designation... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  7. 78 FR 3083 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-15

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  8. 78 FR 53007 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-27

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  9. 77 FR 14592 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-12

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... whose property and interests in property have ] been blocked pursuant to the Foreign Narcotics Kingpin... the activities of significant foreign narcotics traffickers and their organizations on a...

  10. 77 FR 56271 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  11. 77 FR 4400 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-27

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entities whose property and interests in property have been blocked pursuant to the Foreign Narcotics... establishes a program targeting the activities of significant foreign narcotics traffickers and...

  12. 76 FR 56875 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-14

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation Act (``Kingpin... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  13. 76 FR 25407 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-04

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property are blocked pursuant to the Foreign Narcotics Kingpin Designation Act... targeting the activities of significant foreign narcotics ] traffickers and their organizations on...

  14. 76 FR 5857 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-02

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation... the activities of significant foreign narcotics traffickers and their organizations on a...

  15. 77 FR 28670 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-15

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation... significant foreign narcotics traffickers and their organizations on a worldwide basis. It provides...

  16. 77 FR 48609 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-14

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... Narcotics Kingpin Designation Act (``Kingpin Act''). DATES: The designation by the Director of OFAC of the... of significant foreign narcotics traffickers and their organizations on a worldwide basis....

  17. 76 FR 25405 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-04

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... whose property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin... the activities of significant foreign narcotics traffickers and their organizations on a...

  18. 77 FR 38140 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-26

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entities) whose property and interests in property have been blocked pursuant to the Foreign Narcotics... program targeting the activities of significant foreign narcotics traffickers and their organizations on...

  19. 78 FR 62946 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-22

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... entity whose property and interests in property have been blocked pursuant to the Foreign Narcotics... program targeting the activities of significant foreign narcotics traffickers and their organizations on...

  20. 77 FR 63418 - Additional Designations, Foreign Narcotics Kingpin Designation Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-16

    ... Office of Foreign Assets Control Additional Designations, Foreign Narcotics Kingpin Designation Act... property and interests in property have been blocked pursuant to the Foreign Narcotics Kingpin Designation... program targeting the activities of significant foreign narcotics traffickers and their organizations on...