Science.gov

Sample records for additional analyses show

  1. 19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. WINDOW DETAIL, NORTH WALL OF GARAGE ADDITION. VIEW SHOWS CONCRETE BLOCK CONSTRUCTION OF ADDITION. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  2. View of southwest corner showing ell addition and carport, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of southwest corner showing ell addition and carport, facing northeast. - Albrook Air Force Station, Field Officer's Quarters, West side of Dargue Avenue Circle, Balboa, Former Panama Canal Zone, CZ

  3. 1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. WEST SIDE, NORTH END OF BUILDING 1. SHOWS ADDITIONAL ANGLES IN BUILDING AT SOUTHERN END. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA

  4. 6. INTERIOR OF UNFINISHED BASEMENT UNDER BEDROOM ADDITION SHOWING CONCRETE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. INTERIOR OF UNFINISHED BASEMENT UNDER BEDROOM ADDITION SHOWING CONCRETE FORM IMPRESSIONS ON THE WALLS, AND EXPOSED FLOOR SUPPORT BEAMS. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  5. Interior view of addition pharmacy showing dutch door and security ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of addition pharmacy showing dutch door and security ceiling grate, facing north. - Albrook Air Force Station, Dispensary, East side of Canfield Avenue, Balboa, Former Panama Canal Zone, CZ

  6. View of building 11050, showing metal clad addition on east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing metal clad addition on east elevation, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  7. View of building 11050 showing south side with modern addition ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 showing south side with modern addition on the left and freestanding structure in the center. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

  8. View of building 11050, showing two additions on east and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050, showing two additions on east and north side. Looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Machine Shop, C Street, China Lake, Kern County, CA

  9. 2. WEST SIDE SHOWING SHED ADDITION, BATHROOM AND WOODPOLE TELECOMMUNICATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. WEST SIDE SHOWING SHED ADDITION, BATHROOM AND WOOD-POLE TELECOMMUNICATION ANTENNA. NEW CONTROL STATION BUILDING IN BACKGROUND. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Control Station, Hydrographer's Office, Bishop Creek, Bishop, Inyo County, CA

  10. 12. POWER PLANT PART OF BUILDING SHOWING RELATION TO ADDITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. POWER PLANT PART OF BUILDING SHOWING RELATION TO ADDITION AND EQUIPMENT PART OF BUILDING - Boswell Bay White Alice Site, Radio Relay Building, Chugach National Forest, Cordova, Valdez-Cordova Census Area, AK

  11. 6. SIDE ELEVATION, DETAIL SHOWING ORIGINAL LOG CONSTRUCTION, CLAPBOARD ADDITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. SIDE ELEVATION, DETAIL SHOWING ORIGINAL LOG CONSTRUCTION, CLAPBOARD ADDITION AND CHIMNEY STACK - Shinn-Curtis Log Cabin, 23 Washington Street (moved from Rancocas Boulevard), Mount Holly, Burlington County, NJ

  12. 4. WEST SIDE OF CANNERY In addition to showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. WEST SIDE OF CANNERY In addition to showing the on-going deterioration of the buildings, this view shows the variety of types of construction used as the numerous additions were being made. The wooden covered conveyor system, which transported empty cans from the can storage area to the canning floor can be seen at the base of the smoke stack to the right. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  13. 15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United Engineering Company Ltd., Alameda Shipyard. A site map with all existing structures keyed to an identification legend. Also shows proposed new structures. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2. Plan no. 10,528. Scale one inch to 100 feet. November 12, 1943, last revised 1/18/44. pencil on vellum - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

  14. Oblique view from southwest showing newer (1966) addition with taller ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Oblique view from southwest showing newer (1966) addition with taller original structure, view facing east-northeast - U.S. Naval Base, Pearl Harbor, Industrial X-Ray Building, Off Sixth Street, adjacent to and south of Facility No. 11, Pearl City, Honolulu County, HI

  15. 4. DETAIL VIEW OF EAST CORNER, SHOWING RECENT ADDITION OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. DETAIL VIEW OF EAST CORNER, SHOWING RECENT ADDITION OF WINDOWS TO SOUTHEAST SIDE AND RECENT CLADDING IN CONTRAST TO ORIGINAL SHIPLAP SIDING INTACT ON NORTHEAST SIDE - Oakland Army Base, Transit Shed, East of Dunkirk Street & South of Burma Road, Oakland, Alameda County, CA

  16. 32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR AT PHOTO LEFT CENTER AND 1-LIGHT OVER 1LIGHT SASH WINDOW THROUGH WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  17. 8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. MACHINERY SHED STORAGE ROOM ADDITION DETAIL SHOWING MATRIX OF NAILS USED TO ADHERE PORTLAND CEMENT PLASTER, SOUTH ADOBE WALL ADJACENT TO WINDOW Note: Photographs Nos. AZ-159-A-9 through AZ-159-A-10 are photocopies of photographs. The original prints and negatives are located in the SCS Tucson Plant Materials Center, Tucson, Arizona. Photographer Ted F. Spaller. - Tucson Plant Material Center, Machinery Shed, 3241 North Romero Road, Tucson, Pima County, AZ

  18. 51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER AT LOWER LEFT, AND FOUNDATIONS FOR ROD MILL BETWEEN COOLER AND STEPHENS-ADAMSON INCLINED BUCKET ELEVATOR. THE BELT CONVEYOR TO RIGHT OF ELEVATOR FED ELEVATOR FROM ROD MILL. 100-TON ORE BIN AND DUST COLLECTOR IS BEHIND FRAMING BENT. NOTE CONVEYOR EMERGING FROM BOTTOM OF ORE BIN, THIS AND THE INCLINED ELEVATOR FED THE SYMONS SCREEN (MISSING). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  19. Improving complex kinship analyses with additional STR loci.

    PubMed

    Carboni, Ilaria; Iozzi, Sara; Nutini, Anna Lucia; Torricelli, Francesca; Ricci, Ugo

    2014-11-01

    In a standard paternity testing, mother, child, and alleged father are analyzed with STR markers using commercially available kits. Since Italian civil legislation does not have thresholds to confirm a paternity, paternity is practically proven when likelihood ratio increases prior probability of paternity to posterior, accepted by court as sufficient. However, in some cases the number of markers included in a commercial kit may be insufficient to conclusively prove or disprove a relationship between individuals, especially when complex family scenarios are suspected or indirect analyses are required. Additional genetic information can increase the values of the likelihood ratio regarding the detection of true parental relationships in a pedigree, while reducing the chances of false attributions (e.g. false paternities). In these cases the introduction of a 26Plex amplification system allows to examine 23-26 additional markers depending on the commercial kit used, thus increasing the statistical power of the kinship analysis. The PCR conditions were optimized for a multiplex amplification system and a new generation CE instrument. In order to demonstrate the utility of additional STRs markers, four complex kinship cases are presented.

  20. 12. Interior view of the 1930's leant0 addition, showing the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Interior view of the 1930's lean-t0 addition, showing the commercial storage and space and the addition's roof framing; looking north - Horsepasture Store, U.S. Route 58 & State Route 687, Horse Pasture, Henry County, VA

  1. 54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. VIEW OF ROASTER ADDITION FROM SOUTHEAST. SHOWS ELEVATOR/ORE BIN ADDITION ON LEFT WITH BASE OF EXHAUST STACK, PORTION OF TOPPLED STACK ON LOWER RIGHT IN VIEW, AND UPPER TAILINGS POND BEYOND. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  2. Comparative Analyses of the Lipooligosaccharides from Nontypeable Haemophilus influenzae and Haemophilus haemolyticus Show Differences in Sialic Acid and Phosphorylcholine Modifications

    PubMed Central

    Post, Deborah M. B.; Ketterer, Margaret R.; Coffin, Jeremy E.; Reinders, Lorri M.; Munson, Robert S.; Bair, Thomas; Murphy, Timothy F.; Foster, Eric D.; Gibson, Bradford W.

    2016-01-01

    Haemophilus haemolyticus and nontypeable Haemophilus influenzae (NTHi) are closely related upper airway commensal bacteria that are difficult to distinguish phenotypically. NTHi causes upper and lower airway tract infections in individuals with compromised airways, while H. haemolyticus rarely causes such infections. The lipooligosaccharide (LOS) is an outer membrane component of both species and plays a role in NTHi pathogenesis. In this study, comparative analyses of the LOS structures and corresponding biosynthesis genes were performed. Mass spectrometric and immunochemical analyses showed that NTHi LOS contained terminal sialic acid more frequently and to a higher extent than H. haemolyticus LOS did. Genomic analyses of 10 strains demonstrated that H. haemolyticus lacked the sialyltransferase genes lic3A and lic3B (9/10) and siaA (10/10), but all strains contained the sialic acid uptake genes siaP and siaT (10/10). However, isothermal titration calorimetry analyses of SiaP from two H. haemolyticus strains showed a 3.4- to 7.3-fold lower affinity for sialic acid compared to that of NTHi SiaP. Additionally, mass spectrometric and immunochemical analyses showed that the LOS from H. haemolyticus contained phosphorylcholine (ChoP) less frequently than the LOS from NTHi strains. These differences observed in the levels of sialic acid and ChoP incorporation in the LOS structures from H. haemolyticus and NTHi may explain some of the differences in their propensities to cause disease. PMID:26729761

  3. Comparative Analyses of the Lipooligosaccharides from Nontypeable Haemophilus influenzae and Haemophilus haemolyticus Show Differences in Sialic Acid and Phosphorylcholine Modifications.

    PubMed

    Post, Deborah M B; Ketterer, Margaret R; Coffin, Jeremy E; Reinders, Lorri M; Munson, Robert S; Bair, Thomas; Murphy, Timothy F; Foster, Eric D; Gibson, Bradford W; Apicella, Michael A

    2016-01-04

    Haemophilus haemolyticus and nontypeable Haemophilus influenzae (NTHi) are closely related upper airway commensal bacteria that are difficult to distinguish phenotypically. NTHi causes upper and lower airway tract infections in individuals with compromised airways, while H. haemolyticus rarely causes such infections. The lipooligosaccharide (LOS) is an outer membrane component of both species and plays a role in NTHi pathogenesis. In this study, comparative analyses of the LOS structures and corresponding biosynthesis genes were performed. Mass spectrometric and immunochemical analyses showed that NTHi LOS contained terminal sialic acid more frequently and to a higher extent than H. haemolyticus LOS did. Genomic analyses of 10 strains demonstrated that H. haemolyticus lacked the sialyltransferase genes lic3A and lic3B (9/10) and siaA (10/10), but all strains contained the sialic acid uptake genes siaP and siaT (10/10). However, isothermal titration calorimetry analyses of SiaP from two H. haemolyticus strains showed a 3.4- to 7.3-fold lower affinity for sialic acid compared to that of NTHi SiaP. Additionally, mass spectrometric and immunochemical analyses showed that the LOS from H. haemolyticus contained phosphorylcholine (ChoP) less frequently than the LOS from NTHi strains. These differences observed in the levels of sialic acid and ChoP incorporation in the LOS structures from H. haemolyticus and NTHi may explain some of the differences in their propensities to cause disease.

  4. Advanced Behavioral Analyses Show that the Presence of Food Causes Subtle Changes in C. elegans Movement

    PubMed Central

    Angstman, Nicholas B.; Frank, Hans-Georg; Schmitz, Christoph

    2016-01-01

    As a widely used and studied model organism, Caenorhabditis elegans worms offer the ability to investigate implications of behavioral change. Although, investigation of C. elegans behavioral traits has been shown, analysis is often narrowed down to measurements based off a single point, and thus cannot pick up on subtle behavioral and morphological changes. In the present study videos were captured of four different C. elegans strains grown in liquid cultures and transferred to NGM-agar plates with an E. coli lawn or with no lawn. Using an advanced software, WormLab, the full skeleton and outline of worms were tracked to determine whether the presence of food affects behavioral traits. In all seven investigated parameters, statistically significant differences were found in worm behavior between those moving on NGM-agar plates with an E. coli lawn and NGM-agar plates with no lawn. Furthermore, multiple test groups showed differences in interaction between variables as the parameters that significantly correlated statistically with speed of locomotion varied. In the present study, we demonstrate the validity of a model to analyze C. elegans behavior beyond simple speed of locomotion. The need to account for a nested design while performing statistical analyses in similar studies is also demonstrated. With extended analyses, C. elegans behavioral change can be investigated with greater sensitivity, which could have wide utility in fields such as, but not limited to, toxicology, drug discovery, and RNAi screening. PMID:27065825

  5. New genetic and linguistic analyses show ancient human influence on baobab evolution and distribution in Australia.

    PubMed

    Rangan, Haripriya; Bell, Karen L; Baum, David A; Fowler, Rachael; McConvell, Patrick; Saunders, Thomas; Spronck, Stef; Kull, Christian A; Murphy, Daniel J

    2015-01-01

    This study investigates the role of human agency in the gene flow and geographical distribution of the Australian baobab, Adansonia gregorii. The genus Adansonia is a charismatic tree endemic to Africa, Madagascar, and northwest Australia that has long been valued by humans for its multiple uses. The distribution of genetic variation in baobabs in Africa has been partially attributed to human-mediated dispersal over millennia, but this relationship has never been investigated for the Australian species. We combined genetic and linguistic data to analyse geographic patterns of gene flow and movement of word-forms for A. gregorii in the Aboriginal languages of northwest Australia. Comprehensive assessment of genetic diversity showed weak geographic structure and high gene flow. Of potential dispersal vectors, humans were identified as most likely to have enabled gene flow across biogeographic barriers in northwest Australia. Genetic-linguistic analysis demonstrated congruence of gene flow patterns and directional movement of Aboriginal loanwords for A. gregorii. These findings, along with previous archaeobotanical evidence from the Late Pleistocene and Holocene, suggest that ancient humans significantly influenced the geographic distribution of Adansonia in northwest Australia.

  6. New Genetic and Linguistic Analyses Show Ancient Human Influence on Baobab Evolution and Distribution in Australia

    PubMed Central

    Rangan, Haripriya; Bell, Karen L.; Baum, David A.; Fowler, Rachael; McConvell, Patrick; Saunders, Thomas; Spronck, Stef; Kull, Christian A.; Murphy, Daniel J.

    2015-01-01

    This study investigates the role of human agency in the gene flow and geographical distribution of the Australian baobab, Adansonia gregorii. The genus Adansonia is a charismatic tree endemic to Africa, Madagascar, and northwest Australia that has long been valued by humans for its multiple uses. The distribution of genetic variation in baobabs in Africa has been partially attributed to human-mediated dispersal over millennia, but this relationship has never been investigated for the Australian species. We combined genetic and linguistic data to analyse geographic patterns of gene flow and movement of word-forms for A. gregorii in the Aboriginal languages of northwest Australia. Comprehensive assessment of genetic diversity showed weak geographic structure and high gene flow. Of potential dispersal vectors, humans were identified as most likely to have enabled gene flow across biogeographic barriers in northwest Australia. Genetic-linguistic analysis demonstrated congruence of gene flow patterns and directional movement of Aboriginal loanwords for A. gregorii. These findings, along with previous archaeobotanical evidence from the Late Pleistocene and Holocene, suggest that ancient humans significantly influenced the geographic distribution of Adansonia in northwest Australia. PMID:25830225

  7. 50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100TON STEEL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100-TON STEEL UNOXIDIZED ORE BIN, STEPHENS-ADAMSON 15 TON/HR INCLINED BUCKET ELEVATOR, AND DUST COLLECTION BIN IN UPPER RIGHT QUADRANT. THE ROD MILL CIRCUIT STOOD IN FRONT OF THE BUCKET ELEVATOR AND BEHIND THE BAKER COOLER (LEFT CENTER). MILL SOLUTION TANKS WERE IN FRONT OF THE CRUSHED OXIDIZED ORE BIN (CENTER), AND THE MILL FLOOR WAS THE NEXT LEVEL DOWN (RIGHT). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  8. Factorial Moments Analyses Show a Characteristic Length Scale in DNA Sequences

    NASA Astrophysics Data System (ADS)

    Mohanty, A. K.; Narayana Rao, A. V. S. S.

    2000-02-01

    A unique feature of most of the DNA sequences, found through the factorial moments analysis, is the existence of a characteristic length scale around which the density distribution is nearly Poissonian. Above this point, the DNA sequences, irrespective of their intron contents, show long range correlations with a significant deviation from the Gaussian statistics, while, below this point, the DNA statistics are essentially Gaussian. The famous DNA walk representation is also shown to be a special case of the present analysis.

  9. Multidimensional Genome-wide Analyses Show Accurate FVIII Integration by ZFN in Primary Human Cells

    PubMed Central

    Sivalingam, Jaichandran; Kenanov, Dimitar; Han, Hao; Nirmal, Ajit Johnson; Ng, Wai Har; Lee, Sze Sing; Masilamani, Jeyakumar; Phan, Toan Thang; Maurer-Stroh, Sebastian; Kon, Oi Lian

    2016-01-01

    Costly coagulation factor VIII (FVIII) replacement therapy is a barrier to optimal clinical management of hemophilia A. Therapy using FVIII-secreting autologous primary cells is potentially efficacious and more affordable. Zinc finger nucleases (ZFN) mediate transgene integration into the AAVS1 locus but comprehensive evaluation of off-target genome effects is currently lacking. In light of serious adverse effects in clinical trials which employed genome-integrating viral vectors, this study evaluated potential genotoxicity of ZFN-mediated transgenesis using different techniques. We employed deep sequencing of predicted off-target sites, copy number analysis, whole-genome sequencing, and RNA-seq in primary human umbilical cord-lining epithelial cells (CLECs) with AAVS1 ZFN-mediated FVIII transgene integration. We combined molecular features to enhance the accuracy and activity of ZFN-mediated transgenesis. Our data showed a low frequency of ZFN-associated indels, no detectable off-target transgene integrations or chromosomal rearrangements. ZFN-modified CLECs had very few dysregulated transcripts and no evidence of activated oncogenic pathways. We also showed AAVS1 ZFN activity and durable FVIII transgene secretion in primary human dermal fibroblasts, bone marrow- and adipose tissue-derived stromal cells. Our study suggests that, with close attention to the molecular design of genome-modifying constructs, AAVS1 ZFN-mediated FVIII integration in several primary human cell types may be safe and efficacious. PMID:26689265

  10. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  11. Structured additive distributional regression for analysing landings per unit effort in fisheries research.

    PubMed

    Mamouridis, Valeria; Klein, Nadja; Kneib, Thomas; Cadarso Suarez, Carmen; Maynou, Francesc

    2017-01-01

    We analysed the landings per unit effort (LPUE) from the Barcelona trawl fleet targeting the red shrimp (Aristeus antennatus) using novel Bayesian structured additive distributional regression to gain a better understanding of the dynamics and determinants of variation in LPUE. The data set, covering a time span of 17 years, includes fleet-dependent variables (e.g. the number of trips performed by vessels), temporal variables (inter- and intra-annual variability) and environmental variables (the North Atlantic Oscillation index). Based on structured additive distributional regression, we evaluate (i) the gain in replacing purely linear predictors by additive predictors including nonlinear effects of continuous covariates, (ii) the inclusion of vessel-specific effects based on either fixed or random effects, (iii) different types of distributions for the response, and (iv) the potential gain in not only modelling the location but also the scale/shape parameter of these distributions. Our findings support that flexible model variants are indeed able to improve the fit considerably and that additional insights can be gained. Tools to select within several model specifications and assumptions are discussed in detail as well.

  12. ADDITIONAL STRESS AND FRACTURE MECHANICS ANALYSES OF PRESSURIZED WATER REACTOR PRESSURE VESSEL NOZZLES

    SciTech Connect

    Walter, Matthew; Yin, Shengjun; Stevens, Gary; Sommerville, Daniel; Palm, Nathan; Heinecke, Carol

    2012-01-01

    In past years, the authors have undertaken various studies of nozzles in both boiling water reactors (BWRs) and pressurized water reactors (PWRs) located in the reactor pressure vessel (RPV) adjacent to the core beltline region. Those studies described stress and fracture mechanics analyses performed to assess various RPV nozzle geometries, which were selected based on their proximity to the core beltline region, i.e., those nozzle configurations that are located close enough to the core region such that they may receive sufficient fluence prior to end-of-life (EOL) to require evaluation of embrittlement as part of the RPV analyses associated with pressure-temperature (P-T) limits. In this paper, additional stress and fracture analyses are summarized that were performed for additional PWR nozzles with the following objectives: To expand the population of PWR nozzle configurations evaluated, which was limited in the previous work to just two nozzles (one inlet and one outlet nozzle). To model and understand differences in stress results obtained for an internal pressure load case using a two-dimensional (2-D) axi-symmetric finite element model (FEM) vs. a three-dimensional (3-D) FEM for these PWR nozzles. In particular, the ovalization (stress concentration) effect of two intersecting cylinders, which is typical of RPV nozzle configurations, was investigated. To investigate the applicability of previously recommended linear elastic fracture mechanics (LEFM) hand solutions for calculating the Mode I stress intensity factor for a postulated nozzle corner crack for pressure loading for these PWR nozzles. These analyses were performed to further expand earlier work completed to support potential revision and refinement of Title 10 to the U.S. Code of Federal Regulations (CFR), Part 50, Appendix G, Fracture Toughness Requirements, and are intended to supplement similar evaluation of nozzles presented at the 2008, 2009, and 2011 Pressure Vessels and Piping (PVP

  13. Maps showing mines, quarries, and prospects, with analyses of samples, Gee Creek Wilderness, Polk and Monroe counties, Tennessee

    USGS Publications Warehouse

    Gazdik, Gertrude C.; Behum, Paul T.

    1983-01-01

    During the recent U.S. Bureau of Mines field investigation, 21 samples were collected (fig. 2) and were submitted to the Bureau's Reno Metallurgy Research Center, Reno, Nev., for analysis. All samples were tested for 40 elements by semiquantitative spectrographic analyses. Additional testing by atomic absorption, neutron activation, and wet chemical techniques was performed for selected elements on some samples. Two shale samples were submitted to the Bureau of Mines, Tuscaloosa Metallurgy Research Center, Tuscaloosa, Ala., for the evaluation of ceramic properties. 

  14. Additional Measurements and Analyses of H217O and H218O

    NASA Astrophysics Data System (ADS)

    Pearson, John; Yu, Shanshan; Walters, Adam; Daly, Adam M.

    2015-06-01

    Historically the analysis of the spectrum of water has been a balance between the quality of the data set and the applicability of the Hamiltonian to a highly non-rigid molecule. Recently, a number of different non-rigid analysis approaches have successfully been applied to 16O water resulting in a self-consistent set of transitions and energy levels to high J which allowed the spectrum to be modeled to experimental precision. The data set for 17O and 18O water was previously reviewed and many of the problematic measurements identified, but Hamiltonian modeling of the remaining data resulted in significantly poorer quality fits than that for the 16O parent. As a result, we have made additional microwave measurements and modeled the existing 17O and 18O data sets with an Euler series model. This effort has illuminated a number of additional problematic measurements in the previous data sets and has resulted in analyses of 17O and 18O water that are of similar quality to the 16O analysis. We report the new lines, the analyses and make recommendations on the quality of the experimental data sets. SS. Yu, J.C. Pearson, B.J. Drouin et al. J. Mol. Spectrosc. 279,~16-25 (2012) J. Tennyson, P.F. Bernath, L.R. Brown et al. J. Quant. Spectrosc. Rad. Trans. 117, 29-58 (2013) J. Tennyson, P.F. Bernath, L.R. Brown et al. J. Quant. Spectrosc. Rad. Trans. 110, 573-596 (2009) H.M. Pickett, J.C. Pearson, C.E. Miller J. Mol. Spectrosc. 233, 174-179 (2005)

  15. Metagenomic analyses of the late Pleistocene permafrost - additional tools for reconstruction of environmental conditions

    NASA Astrophysics Data System (ADS)

    Rivkina, Elizaveta; Petrovskaya, Lada; Vishnivetskaya, Tatiana; Krivushin, Kirill; Shmakova, Lyubov; Tutukina, Maria; Meyers, Arthur; Kondrashov, Fyodor

    2016-04-01

    A comparative analysis of the metagenomes from two 30 000-year-old permafrost samples, one of lake-alluvial origin and the other from late Pleistocene Ice Complex sediments, revealed significant differences within microbial communities. The late Pleistocene Ice Complex sediments (which have been characterized by the absence of methane with lower values of redox potential and Fe2+ content) showed a low abundance of methanogenic archaea and enzymes from both the carbon and nitrogen cycles, but a higher abundance of enzymes associated with the sulfur cycle. The metagenomic and geochemical analyses described in the paper provide evidence that the formation of the sampled late Pleistocene Ice Complex sediments likely took place under much more aerobic conditions than lake-alluvial sediments.

  16. Genome sequence analyses show that Neisseria oralis is the same species as ‘Neisseria mucosa var. heidelbergensis’

    PubMed Central

    Jolley, Keith A.; Maiden, Martin C. J.

    2013-01-01

    Phylogenies generated from whole genome sequence (WGS) data provide definitive means of bacterial isolate characterization for typing and taxonomy. The species status of strains recently defined with conventional taxonomic approaches as representing Neisseria oralis was examined by the analysis of sequences derived from WGS data, specifically: (i) 53 Neisseria ribosomal protein subunit (rps) genes (ribosomal multi-locus sequence typing, rMLST); and (ii) 246 Neisseria core genes (core genome MLST, cgMLST). These data were compared with phylogenies derived from 16S and 23S rRNA gene sequences, demonstrating that the N. oralis strains were monophyletic with strains described previously as representing ‘Neisseria mucosa var. heidelbergensis’ and that this group was of equivalent taxonomic status to other well-described species of the genus Neisseria. Phylogenetic analyses also indicated that Neisseria sicca and Neisseria macacae should be considered the same species as Neisseria mucosa and that Neisseria flavescens should be considered the same species as Neisseria subflava. Analyses using rMLST showed that some strains currently defined as belonging to the genus Neisseria were more closely related to species belonging to other genera within the family; however, whole genome analysis of a more comprehensive selection of strains from within the family Neisseriaceae would be necessary to confirm this. We suggest that strains previously identified as representing ‘N. mucosa var. heidelbergensis’ and deposited in culture collections should be renamed N. oralis. Finally, one of the strains of N. oralis was able to ferment lactose, due to the presence of β-galactosidase and lactose permease genes, a characteristic previously thought to be unique to Neisseria lactamica, which therefore cannot be thought of as diagnostic for this species; however, the rMLST and cgMLST analyses confirm that N. oralis is most closely related to N. mucosa. PMID:24097834

  17. Community-level physiological profiling analyses show potential to identify the copiotrophic bacteria present in soil environments

    PubMed Central

    Lladó, Salvador; Baldrian, Petr

    2017-01-01

    Community-level physiological profiling (CLPP) analyses from very diverse environments are frequently used with the aim of characterizing the metabolic versatility of whole environmental bacterial communities. While the limitations of the methodology for the characterization of whole communities are well known, we propose that CLPP combined with high-throughput sequencing and qPCR can be utilized to identify the copiotrophic, fast-growing fraction of the bacterial community of soil environments, where oligotrophic taxa are usually dominant. In the present work we have used this approach to analyze samples of litter and soil from a coniferous forest in the Czech Republic using BIOLOG GN2 plates. Monosaccharides and amino acids were utilized significantly faster than other C substrates, such as organic acids, in both litter and soil samples. Bacterial biodiversity in CLPP wells was significantly lower than in the original community, independently of the carbon source. Bacterial communities became highly enriched in taxa that typically showed low abundance in the original soil, belonging mostly to the Gammaproteobacteria and the genus Pseudomonas, indicating that the copiotrophic strains, favoured by the high nutrient content, are rare in forest litter and soil. In contrast, taxa abundant in the original samples were rarely found to grow at sufficient rates under the CLPP conditions. Our results show that CLPP is useful to detect copiotrophic bacteria from the soil environments and that bacterial growth is substrate specific. PMID:28170446

  18. Reprocessing the Southern Hemisphere ADditional OZonesondes (SHADOZ) Database for Long-Term Trend Analyses

    NASA Astrophysics Data System (ADS)

    Witte, J. C.; Thompson, A. M.; Coetzee, G.; Fujiwara, M.; Johnson, B. J.; Sterling, C. W.; Cullis, P.; Ashburn, C. E.; Jordan, A. F.

    2015-12-01

    SHADOZ is a large archive of tropical balloon-bone ozonesonde data at NASA/Goddard Space Flight Center with data from 14 tropical and subtropical stations provided by collaborators in Europe, Asia, Latin America and Africa . The SHADOZ time series began in 1998, using electrochemical concentration cell (ECC) ozonesondes. Like many long-term sounding stations, SHADOZ is characterized by variations in operating procedures, launch protocols, and data processing such that biases within a data record and among sites appear. In addition, over time, the radiosonde and ozonesonde instruments and data processing protocols have changed, adding to the measurement uncertainties at individual stations and limiting the reliability of ozone profile trends and continuous satellite validation. Currently, the ozonesonde community is engaged in reprocessing ECC data, with an emphasis on homogenization of the records to compensate for the variations in instrumentation and technique. The goals are to improve the information and integrity of each measurement record and to support calculation of more reliable trends. We illustrate the reprocessing activity of SHADOZ with selected stations. We will (1) show reprocessing steps based on the recent WMO report that provides post-processing guidelines for ozonesondes; (2) characterize uncertainties in various parts of the ECC conditioning process; and (3) compare original and reprocessed data to co-located ground and satellite measurements of column ozone.

  19. Coalescent analyses show isolation without migration in two closely related tropical orioles: the case of Icterus graduacauda and Icterus chrysater

    PubMed Central

    Cortés-Rodríguez, Nandadevi; Jacobsen, Frode; Hernandez-Baños, Blanca E; Navarro-Siguenza, Adolfo G; Peters, Jeffrey L; Omland, Kevin E

    2013-01-01

    The Isthmus of Tehuantepec has played an important role in shaping the avian diversity of Mexico, as well as the rest of the Western Hemisphere. It has been both a barrier and a land connector between North and South America for many groups of birds. Furthermore, climatic change over the Pleistocene has resulted in ecological fluctuations that led to periods of connection and isolation of the highlands in this area. Here we studied the divergence of two species of orioles whose distribution in the highlands is separated by the lowlands of the Isthmus of Tehuantepec: Icterus graduacauda (west of the Isthmus) and Icterus chrysater (east of the Isthmus). We sequenced multiple loci (one mitochondrial gene and six nuclear introns) and performed coalescent analyses (Isolation with Migration) to test whether their divergence resulted from prior occupancy of the ancestral area followed by a vicariant event or recent dispersal from one side or the other of this Isthmus. Results strongly indicate a vicariant event roughly 300,000 years ago in the Pleistocene followed by little or no gene flow. Both mitochondrial and nuclear genes show that the Isthmus of Tehuantepec is a strong barrier to gene flow. Thus, these two species appear to not exchange genes despite their recent divergence and the close geographic proximity of their ranges. PMID:24340179

  20. Using Additional Analyses to Clarify the Functions of Problem Behavior: An Analysis of Two Cases

    ERIC Educational Resources Information Center

    Payne, Steven W.; Dozier, Claudia L.; Neidert, Pamela L.; Jowett, Erica S.; Newquist, Matthew H.

    2014-01-01

    Functional analyses (FA) have proven useful for identifying contingencies that influence problem behavior. Research has shown that some problem behavior may only occur in specific contexts or be influenced by multiple or idiosyncratic variables. When these contexts or sources of influence are not assessed in an FA, further assessment may be…

  1. Genome-wide analyses in bacteria show small-RNA enrichment for long and conserved intergenic regions.

    PubMed

    Tsai, Chen-Hsun; Liao, Rick; Chou, Brendan; Palumbo, Michael; Contreras, Lydia M

    2015-01-01

    Interest in finding small RNAs (sRNAs) in bacteria has significantly increased in recent years due to their regulatory functions. Development of high-throughput methods and more sophisticated computational algorithms has allowed rapid identification of sRNA candidates in different species. However, given their various sizes (50 to 500 nucleotides [nt]) and their potential genomic locations in the 5' and 3' untranslated regions as well as in intergenic regions, identification and validation of true sRNAs have been challenging. In addition, the evolution of bacterial sRNAs across different species continues to be puzzling, given that they can exert similar functions with various sequences and structures. In this study, we analyzed the enrichment patterns of sRNAs in 13 well-annotated bacterial species using existing transcriptome and experimental data. All intergenic regions were analyzed by WU-BLAST to examine conservation levels relative to species within or outside their genus. In total, more than 900 validated bacterial sRNAs and 23,000 intergenic regions were analyzed. The results indicate that sRNAs are enriched in intergenic regions, which are longer and more conserved than the average intergenic regions in the corresponding bacterial genome. We also found that sRNA-coding regions have different conservation levels relative to their flanking regions. This work provides a way to analyze how noncoding RNAs are distributed in bacterial genomes and also shows conserved features of intergenic regions that encode sRNAs. These results also provide insight into the functions of regions surrounding sRNAs and into optimization of RNA search algorithms.

  2. Genome-Wide Analyses in Bacteria Show Small-RNA Enrichment for Long and Conserved Intergenic Regions

    PubMed Central

    Tsai, Chen-Hsun; Liao, Rick; Chou, Brendan; Palumbo, Michael

    2014-01-01

    Interest in finding small RNAs (sRNAs) in bacteria has significantly increased in recent years due to their regulatory functions. Development of high-throughput methods and more sophisticated computational algorithms has allowed rapid identification of sRNA candidates in different species. However, given their various sizes (50 to 500 nucleotides [nt]) and their potential genomic locations in the 5′ and 3′ untranslated regions as well as in intergenic regions, identification and validation of true sRNAs have been challenging. In addition, the evolution of bacterial sRNAs across different species continues to be puzzling, given that they can exert similar functions with various sequences and structures. In this study, we analyzed the enrichment patterns of sRNAs in 13 well-annotated bacterial species using existing transcriptome and experimental data. All intergenic regions were analyzed by WU-BLAST to examine conservation levels relative to species within or outside their genus. In total, more than 900 validated bacterial sRNAs and 23,000 intergenic regions were analyzed. The results indicate that sRNAs are enriched in intergenic regions, which are longer and more conserved than the average intergenic regions in the corresponding bacterial genome. We also found that sRNA-coding regions have different conservation levels relative to their flanking regions. This work provides a way to analyze how noncoding RNAs are distributed in bacterial genomes and also shows conserved features of intergenic regions that encode sRNAs. These results also provide insight into the functions of regions surrounding sRNAs and into optimization of RNA search algorithms. PMID:25313390

  3. Cross-correlation map analyses show weather variation influences on mosquito abundance patterns in Saginaw County, Michigan, 1989-2005.

    PubMed

    Chuang, Ting-Wu; Ionides, Edward L; Knepper, Randall G; Stanuszek, William W; Walker, Edward D; Wilson, Mark L

    2012-07-01

    Weather is important determinant of mosquito abundance that, in turn, influences vectorborne disease dynamics. In temperate regions, transmission generally is seasonal as mosquito abundance and behavior varies with temperature, precipitation, and other meteorological factors. We investigated how such factors affected species-specific mosquito abundance patterns in Saginaw County, MI, during a 17-yr period. Systematic sampling was undertaken at 22 trapping sites from May to September, during 1989-2005, for 19,228 trap-nights and 300,770 mosquitoes in total. Aedes vexans (Meigen), Culex pipiens L. and Culex restuans Theobald, the most abundant species, were analyzed. Weather data included local daily maximum temperature, minimum temperature, total precipitation, and average relative humidity. In addition to standard statistical methods, cross-correlation mapping was used to evaluate temporal associations with various lag periods between weather variables and species-specific mosquito abundances. Overall, the average number of mosquitoes was 4.90 per trap-night for Ae. vexans, 2.12 for Cx. pipiens, and 1.23 for Cx. restuans. Statistical analysis of the considerable temporal variability in species-specific abundances indicated that precipitation and relative humidity 1 wk prior were significantly positively associated with Ae. vexans, whereas elevated maximum temperature had a negative effect during summer. Cx. pipiens abundance was positively influenced by the preceding minimum temperature in the early season but negatively associated with precipitation during summer and with maximum temperature in July and August. Cx. restuans showed the least weather association, with only relative humidity 2-24 d prior being linked positively during late spring-early summer. The recently developed analytical method applied in this study could enhance our understanding of the influences of weather variability on mosquito population dynamics.

  4. Additional Development and Systems Analyses of Pneumatic Technology for High Speed Civil Transport Aircraft

    NASA Technical Reports Server (NTRS)

    Englar, Robert J.; Willie, F. Scott; Lee, Warren J.

    1999-01-01

    In the Task I portion of this NASA research grant, configuration development and experimental investigations have been conducted on a series of pneumatic high-lift and control surface devices applied to a generic High Speed Civil Transport (HSCT) model configuration to determine their potential for improved aerodynamic performance, plus stability and control of higher performance aircraft. These investigations were intended to optimize pneumatic lift and drag performance; provide adequate control and longitudinal stability; reduce separation flowfields at high angle of attack; increase takeoff/climbout lift-to-drag ratios; and reduce system complexity and weight. Experimental aerodynamic evaluations were performed on a semi-span HSCT generic model with improved fuselage fineness ratio and with interchangeable plain flaps, blown flaps, pneumatic Circulation Control Wing (CCW) high-lift configurations, plain and blown canards, a novel Circulation Control (CC) cylinder blown canard, and a clean cruise wing for reference. Conventional tail power was also investigated for longitudinal trim capability. Also evaluated was unsteady pulsed blowing of the wing high-lift system to determine if reduced pulsed mass flow rates and blowing requirements could be made to yield the same lift as that resulting from steady-state blowing. Depending on the pulsing frequency applied, reduced mass flow rates were indeed found able to provide lift augmentation at lesser blowing values than for the steady conditions. Significant improvements in the aerodynamic characteristics leading to improved performance and stability/control were identified, and the various components were compared to evaluate the pneumatic potential of each. Aerodynamic results were provided to the Georgia Tech Aerospace System Design Lab. to conduct the companion system analyses and feasibility study (Task 2) of theses concepts applied to an operational advanced HSCT aircraft. Results and conclusions from these

  5. An experiment in software reliability: Additional analyses using data from automated replications

    NASA Technical Reports Server (NTRS)

    Dunham, Janet R.; Lauterbach, Linda A.

    1988-01-01

    A study undertaken to collect software error data of laboratory quality for use in the development of credible methods for predicting the reliability of software used in life-critical applications is summarized. The software error data reported were acquired through automated repetitive run testing of three independent implementations of a launch interceptor condition module of a radar tracking problem. The results are based on 100 test applications to accumulate a sufficient sample size for error rate estimation. The data collected is used to confirm the results of two Boeing studies reported in NASA-CR-165836 Software Reliability: Repetitive Run Experimentation and Modeling, and NASA-CR-172378 Software Reliability: Additional Investigations into Modeling With Replicated Experiments, respectively. That is, the results confirm the log-linear pattern of software error rates and reject the hypothesis of equal error rates per individual fault. This rejection casts doubt on the assumption that the program's failure rate is a constant multiple of the number of residual bugs; an assumption which underlies some of the current models of software reliability. data raises new questions concerning the phenomenon of interacting faults.

  6. Integrative Analyses of Colorectal Cancer Show Immunoscore Is a Stronger Predictor of Patient Survival Than Microsatellite Instability.

    PubMed

    Mlecnik, Bernhard; Bindea, Gabriela; Angell, Helen K; Maby, Pauline; Angelova, Mihaela; Tougeron, David; Church, Sarah E; Lafontaine, Lucie; Fischer, Maria; Fredriksen, Tessa; Sasso, Maristella; Bilocq, Amélie M; Kirilovsky, Amos; Obenauf, Anna C; Hamieh, Mohamad; Berger, Anne; Bruneval, Patrick; Tuech, Jean-Jacques; Sabourin, Jean-Christophe; Le Pessot, Florence; Mauillon, Jacques; Rafii, Arash; Laurent-Puig, Pierre; Speicher, Michael R; Trajanoski, Zlatko; Michel, Pierre; Sesboüe, Richard; Frebourg, Thierry; Pagès, Franck; Valge-Archer, Viia; Latouche, Jean-Baptiste; Galon, Jérôme

    2016-03-15

    Microsatellite instability in colorectal cancer predicts favorable outcomes. However, the mechanistic relationship between microsatellite instability, tumor-infiltrating immune cells, Immunoscore, and their impact on patient survival remains to be elucidated. We found significant differences in mutational patterns, chromosomal instability, and gene expression that correlated with patient microsatellite instability status. A prominent immune gene expression was observed in microsatellite-instable (MSI) tumors, as well as in a subgroup of microsatellite-stable (MSS) tumors. MSI tumors had increased frameshift mutations, showed genetic evidence of immunoediting, had higher densities of Th1, effector-memory T cells, in situ proliferating T cells, and inhibitory PD1-PDL1 cells, had high Immunoscores, and were infiltrated with mutation-specific cytotoxic T cells. Multivariate analysis revealed that Immunoscore was superior to microsatellite instability in predicting patients' disease-specific recurrence and survival. These findings indicate that assessment of the immune status via Immunoscore provides a potent indicator of tumor recurrence beyond microsatellite-instability staging that could be an important guide for immunotherapy strategies.

  7. Elapid snake venom analyses show the specificity of the peptide composition at the level of genera Naja and Notechis.

    PubMed

    Munawar, Aisha; Trusch, Maria; Georgieva, Dessislava; Hildebrand, Diana; Kwiatkowski, Marcel; Behnken, Henning; Harder, Sönke; Arni, Raghuvir; Spencer, Patrick; Schlüter, Hartmut; Betzel, Christian

    2014-02-28

    Elapid snake venom is a highly valuable, but till now mainly unexplored, source of pharmacologically important peptides. We analyzed the peptide fractions with molecular masses up to 10 kDa of two elapid snake venoms-that of the African cobra, N. m. mossambica (genus Naja), and the Peninsula tiger snake, N. scutatus, from Kangaroo Island (genus Notechis). A combination of chromatographic methods was used to isolate the peptides, which were characterized by combining complimentary mass spectrometric techniques. Comparative analysis of the peptide compositions of two venoms showed specificity at the genus level. Three-finger (3-F) cytotoxins, bradykinin-potentiating peptides (BPPs) and a bradykinin inhibitor were isolated from the Naja venom. 3-F neurotoxins, Kunitz/basic pancreatic trypsin inhibitor (BPTI)-type inhibitors and a natriuretic peptide were identified in the N. venom. The inhibiting activity of the peptides was confirmed in vitro with a selected array of proteases. Cytotoxin 1 (P01467) from the Naja venom might be involved in the disturbance of cellular processes by inhibiting the cell 20S-proteasome. A high degree of similarity between BPPs from elapid and viperid snake venoms was observed, suggesting that these molecules play a key role in snake venoms and also indicating that these peptides were recruited into the snake venom prior to the evolutionary divergence of the snakes.

  8. A Systematic Review and Meta-Analyses Show that Carbapenem Use and Medical Devices Are the Leading Risk Factors for Carbapenem-Resistant Pseudomonas aeruginosa

    PubMed Central

    Voor in ‘t holt, Anne F.; Severin, Juliëtte A.; Lesaffre, Emmanuel M. E. H.

    2014-01-01

    A systematic review and meta-analyses were performed to identify the risk factors associated with carbapenem-resistant Pseudomonas aeruginosa and to identify sources and reservoirs for the pathogen. A systematic search of PubMed and Embase databases from 1 January 1987 until 27 January 2012 identified 1,662 articles, 53 of which were included in a systematic review and 38 in a random-effects meta-analysis study. The use of carbapenem, use of fluoroquinolones, use of vancomycin, use of other antibiotics, having medical devices, intensive care unit (ICU) admission, having underlying diseases, patient characteristics, and length of hospital stay were significant risk factors in multivariate analyses. The meta-analyses showed that carbapenem use (odds ratio [OR] = 7.09; 95% confidence interval [CI] = 5.43 to 9.25) and medical devices (OR = 5.11; 95% CI = 3.55 to 7.37) generated the highest pooled estimates. Cumulative meta-analyses showed that the pooled estimate of carbapenem use was stable and that the pooled estimate of the risk factor “having medical devices” increased with time. We conclude that our results highlight the importance of antibiotic stewardship and the thoughtful use of medical devices in helping prevent outbreaks of carbapenem-resistant P. aeruginosa. PMID:24550343

  9. Maps and tables showing data and analyses of semiquantitative emmission spectrometry and atomic-absorption spectrophotometry of rock samples, Ugashik, Bristol Bay, and part of Karluk quadrangles, Alaska

    USGS Publications Warehouse

    Wilson, F.H.; O'Leary, R. M.

    1986-01-01

    The accompanying maps and tables show analytical data and data analyses from rock samples collected in conjunction with geologic mapping in the Ugashik, Bristol Bay and western Karluck quadrangles from 1979 through 1981. This work was conducted under the auspices of the Alaska Mineral Resource Assessment Program (AMRAP). A total of 337 samples were collected for analysis, primarily in areas of surficial alteration. The sample locations are shown on sheet 1: they are concentrated along the Pacific Ocean side of the area because the Bristol Bay lowlands part of the map is predominantly unconsolidated Quaternary deposits. Sample collection was by the following people, with their respective two letter identifying code shown in parentheses: W.H. Allaway (AY), J.E. Case (CE), D.P. Cox (CX), R.L. Detterman, (DT), T.G. Theodore (MK), F.H. Wilson (WS), and M.E. Yount (YB).

  10. Phylogenetic analyses and characterization of RNase X25 from Drosophila melanogaster suggest a conserved housekeeping role and additional functions for RNase T2 enzymes in protostomes.

    PubMed

    Ambrosio, Linda; Morriss, Stephanie; Riaz, Ayesha; Bailey, Ryan; Ding, Jian; MacIntosh, Gustavo C

    2014-01-01

    Ribonucleases belonging to the RNase T2 family are enzymes associated with the secretory pathway that are almost absolutely conserved in all eukaryotes. Studies in plants and vertebrates suggest they have an important housekeeping function in rRNA recycling. However, little is known about this family of enzymes in protostomes. We characterized RNase X25, the only RNase T2 enzyme in Drosophila melanogaster. We found that RNase X25 is the major contributor of ribonuclease activity in flies as detected by in gel assays, and has an acidic pH preference. Gene expression analyses showed that the RNase X25 transcript is present in all adult tissues and developmental stages. RNase X25 expression is elevated in response to nutritional stresses; consistent with the hypothesis that this enzyme has a housekeeping role in recycling RNA. A correlation between induction of RNase X25 expression and autophagy was observed. Moreover, induction of gene expression was triggered by oxidative stress suggesting that RNase X25 may have additional roles in stress responses. Phylogenetic analyses of this family in protostomes showed that RNase T2 genes have undergone duplication events followed by divergence in several phyla, including the loss of catalytic residues, and suggest that RNase T2 proteins have acquired novel functions. Among those, it is likely that a role in host immunosuppression evolved independently in several groups, including parasitic Platyhelminthes and parasitoid wasps. The presence of only one RNase T2 gene in the D. melanogaster genome, without any other evident secretory RNase activity detected, makes this organism an ideal system to study the cellular functions of RNase T2 proteins associated with RNA recycling and maintenance of cellular homeostasis. On the other hand, the discovery of gene duplications in several protostome genomes also presents interesting new avenues to study additional biological functions of this ancient family of proteins.

  11. MRI analyses show that kinesio taping affects much more than just the targeted superficial tissues and causes heterogeneous deformations within the whole limb.

    PubMed

    Pamuk, Uluç; Yucesoy, Can A

    2015-12-16

    Kinesio taping (KT) is widely used in the treatment of sports injuries and various neuro-musculoskeletal disorders. However, it is considered as selectively effective on targeted tissues and its mechanical effects have not been quantified objectively. Ascribed to continuity of muscular and connective tissues, mechanical loading imposed can have widespread heterogeneous effects. The aim was to characterize the mechanical effects of KT objectively and to test the hypotheses that KT causes acutely, local deformations not necessarily (I) in agreement with tape adhering direction and (II) limited to the directly targeted tissues. High-resolution 3D magnetic resonance image sets were acquired in healthy human subjects (n=5) prior to and acutely after KT application over the skin along m. tibialis anterior (TA). Hip, knee and ankle angles were kept constant. Demons image registration algorithm was used to calculate local tissue deformations within the lower leg, in vivo. Mean peak tissue strains were significantly higher than strain artifacts. Only KT-to-TA region in part shows local deformations in agreement with tape adhering direction whereas, superficial skin, the rest of KT-to-TA and TA regions show deformations (up to 51.5% length change) in other directions. Non-targeted tissues also show sizable heterogeneous deformations, but in smaller amplitudes. Inter-subject variability is notable. Magnetic resonance imaging analyses allow for a detailed assessment of local tissue deformation occurring acutely after KT application. The findings confirm our hypotheses and characterize how KT affects the underlying tissues, both immediately targeted and distant. This allows revealing mechanisms that can affect clinical outcomes of KT objectively.

  12. Comparative landscape genetic analyses show a Belgian motorway to be a gene flow barrier for red deer (Cervus elaphus), but not wild boars (Sus scrofa).

    PubMed

    Frantz, A C; Bertouille, S; Eloy, M C; Licoppe, A; Chaumont, F; Flamand, M C

    2012-07-01

    While motorways are often assumed to influence the movement behaviour of large mammals, there are surprisingly few studies that show an influence of these linear structures on the genetic make-up of wild ungulate populations. Here, we analyse the spatial genetic structure of red deer (Cervus elaphus) and wild boars (Sus scrofa) along a stretch of motorway in the Walloon part of Belgium. Altogether, 876 red deer were genotyped at 13 microsatellite loci, and 325 wild boars at 14 loci. In the case of the red deer, different genetic clustering tools identified two genetic subpopulations whose borders matched the motorway well. Conversely, no genetic structure was identified in the case of the wild boar. Analysis of isolation-by-distance patterns of pairs of individuals on the same side and on different sides of the motorway also suggested that the road was a barrier to red deer, but not to wild boar movement. While telemetry studies seem to confirm that red deer are more affected by motorways than wild boar, the red deer sample size was also much larger than that of the wild boars. We therefore repeated the analysis of genetic structure in the red deer with randomly sub-sampled data sets of decreasing size. The power to detect the genetic structure using clustering methods decreased with decreasing sample size.

  13. Whole Proteome Analyses on Ruminiclostridium cellulolyticum Show a Modulation of the Cellulolysis Machinery in Response to Cellulosic Materials with Subtle Differences in Chemical and Structural Properties

    PubMed Central

    Badalato, Nelly; Guillot, Alain; Sabarly, Victor; Dubois, Marc; Pourette, Nina; Pontoire, Bruno; Robert, Paul; Bridier, Arnaud; Monnet, Véronique; Sousa, Diana Z.; Durand, Sylvie; Mazéas, Laurent; Buléon, Alain; Bouchez, Théodore; Mortha, Gérard

    2017-01-01

    Lignocellulosic materials from municipal solid waste emerge as attractive resources for anaerobic digestion biorefinery. To increase the knowledge required for establishing efficient bioprocesses, dynamics of batch fermentation by the cellulolytic bacterium Ruminiclostridium cellulolyticum were compared using three cellulosic materials, paper handkerchief, cotton discs and Whatman filter paper. Fermentation of paper handkerchief occurred the fastest and resulted in a specific metabolic profile: it resulted in the lowest acetate-to-lactate and acetate-to-ethanol ratios. By shotgun proteomic analyses of paper handkerchief and Whatman paper incubations, 151 proteins with significantly different levels were detected, including 20 of the 65 cellulosomal components, 8 non-cellulosomal CAZymes and 44 distinct extracytoplasmic proteins. Consistent with the specific metabolic profile observed, many enzymes from the central carbon catabolic pathways had higher levels in paper handkerchief incubations. Among the quantified CAZymes and cellulosomal components, 10 endoglucanases mainly from the GH9 families and 7 other cellulosomal subunits had lower levels in paper handkerchief incubations. An in-depth characterization of the materials used showed that the lower levels of endoglucanases in paper handkerchief incubations could hypothetically result from its lower crystallinity index (50%) and degree of polymerization (970). By contrast, the higher hemicellulose rate in paper handkerchief (13.87%) did not result in the enhanced expression of enzyme with xylanase as primary activity, including enzymes from the “xyl-doc” cluster. It suggests the absence, in this material, of molecular structures that specifically lead to xylanase induction. The integrated approach developed in this work shows that subtle differences among cellulosic materials regarding chemical and structural characteristics have significant effects on expressed bacterial functions, in particular the

  14. Whole Proteome Analyses on Ruminiclostridium cellulolyticum Show a Modulation of the Cellulolysis Machinery in Response to Cellulosic Materials with Subtle Differences in Chemical and Structural Properties.

    PubMed

    Badalato, Nelly; Guillot, Alain; Sabarly, Victor; Dubois, Marc; Pourette, Nina; Pontoire, Bruno; Robert, Paul; Bridier, Arnaud; Monnet, Véronique; Sousa, Diana Z; Durand, Sylvie; Mazéas, Laurent; Buléon, Alain; Bouchez, Théodore; Mortha, Gérard; Bize, Ariane

    2017-01-01

    Lignocellulosic materials from municipal solid waste emerge as attractive resources for anaerobic digestion biorefinery. To increase the knowledge required for establishing efficient bioprocesses, dynamics of batch fermentation by the cellulolytic bacterium Ruminiclostridium cellulolyticum were compared using three cellulosic materials, paper handkerchief, cotton discs and Whatman filter paper. Fermentation of paper handkerchief occurred the fastest and resulted in a specific metabolic profile: it resulted in the lowest acetate-to-lactate and acetate-to-ethanol ratios. By shotgun proteomic analyses of paper handkerchief and Whatman paper incubations, 151 proteins with significantly different levels were detected, including 20 of the 65 cellulosomal components, 8 non-cellulosomal CAZymes and 44 distinct extracytoplasmic proteins. Consistent with the specific metabolic profile observed, many enzymes from the central carbon catabolic pathways had higher levels in paper handkerchief incubations. Among the quantified CAZymes and cellulosomal components, 10 endoglucanases mainly from the GH9 families and 7 other cellulosomal subunits had lower levels in paper handkerchief incubations. An in-depth characterization of the materials used showed that the lower levels of endoglucanases in paper handkerchief incubations could hypothetically result from its lower crystallinity index (50%) and degree of polymerization (970). By contrast, the higher hemicellulose rate in paper handkerchief (13.87%) did not result in the enhanced expression of enzyme with xylanase as primary activity, including enzymes from the "xyl-doc" cluster. It suggests the absence, in this material, of molecular structures that specifically lead to xylanase induction. The integrated approach developed in this work shows that subtle differences among cellulosic materials regarding chemical and structural characteristics have significant effects on expressed bacterial functions, in particular the cellulolysis

  15. Cannabinoid receptor 1 antagonist treatment induces glucagon release and shows an additive therapeutic effect with GLP-1 agonist in diet-induced obese mice.

    PubMed

    Patel, Kartikkumar Navinchandra; Joharapurkar, Amit Arvind; Patel, Vishal; Kshirsagar, Samadhan Govind; Bahekar, Rajesh; Srivastava, Brijesh Kumar; Jain, Mukul R

    2014-12-01

    Cannabinoid 1 (CB1) receptor antagonists reduce body weight and improve insulin sensitivity. Preclinical data indicates that an acute dose of CB1 antagonist rimonabant causes an increase in blood glucose. A stable analog of glucagon-like peptide 1 (GLP-1), exendin-4 improves glucose-stimulated insulin secretion in pancreas, and reduces appetite through activation of GLP-1 receptors in the central nervous system and liver. We hypothesized that the insulin secretagogue effect of GLP-1 agonist exendin-4 may synergize with the insulin-sensitizing action of rimonabant. Intraperitoneal as well as intracerebroventricular administration of rimonabant increased serum glucose upon glucose challenge in overnight fasted, diet-induced obese C57 mice, with concomitant rise in serum glucagon levels. Exendin-4 reversed the acute hyperglycemia induced by rimonabant. The combination of exendin-4 and rimonabant showed an additive effect in the food intake, and sustained body weight reduction upon repeated dosing. The acute efficacy of both the compounds was additive for inducing nausea-like symptoms in conditioned aversion test in mice, whereas exendin-4 treatment antagonized the effect of rimonabant on forced swim test upon chronic dosing. Thus, the addition of exendin-4 to rimonabant produces greater reduction in food intake owing to increased aversion, but reduces the other central nervous system side effects of rimonabant. The hyperglucagonemia induced by rimonabant is partially responsible for enhancing the antiobesity effect of exendin-4.

  16. Tables showing analyses of semiquantitative spectrometry and atomic-absorption spectrophotometry of rock samples collected in the Ugashik, Bristol Bay, and western part of the Karluk quadrangles, Alaska

    USGS Publications Warehouse

    Wilson, Frederic H.; O'Leary, Richard M.

    1987-01-01

    The accompanying tables list chemical analyses of 337 rock samples that were collected in 1979, 1980, and 1981 in conjunction with geologic mapping in the Ugashik, Bristol Bay, and part of Karluk quadrangles. This work was conducted under the auspices of the Alaska Mineral Resource Assessment Program (AMRAP). This report is to accompany Wilson and O'Leary (1986) which inadvertently is missing most of the data tables listed here. Together the two reports contain the complete data from all samples collected for the Ugashik AMRAP.

  17. Maps showing mines, quarries, oil and gas activity, and sample localities in and near the Sipsey Wilderness and additions, Lawrence and Winston Counties, Alabama

    SciTech Connect

    Mory, P.C.; Behum, P.T.; Ross, R.B. Jr.

    1982-01-01

    This report presents the results of a mineral survey of the Sipsey Wilderness and additions, William B. Bankhead National Forest, Lawrence and Winston Counties, Alabama. The survey includes: limestone quarrying, coal mining, and oil and gas activity. 7 references, 5 figures, 2 tables.

  18. Transcriptomic and proteomic analyses of a pale-green durum wheat mutant shows variations in photosystem components and metabolic deficiencies under drought stress

    PubMed Central

    2014-01-01

    Background Leaf pigment content is an important trait involved in environmental interactions. In order to determine its impact on drought tolerance in wheat, we characterized a pale-green durum wheat mutant (Triticum turgidum L. var. durum) under contrasting water availability conditions. Results The pale-green mutant was investigated by comparing pigment content and gene/protein expression profiles to wild-type plants at anthesis. Under well-watered (control) conditions the mutant had lower levels of chlorophylls and carotenoids, but higher levels of xanthophyll de-epoxidation compared to wild-type. Transcriptomic analysis under control conditions showed that defense genes (encoding e.g. pathogenesis-related proteins, peroxidases and chitinases) were upregulated in the mutant, suggesting the presence of mild oxidative stress that was compensated without altering the net rate of photosynthesis. Transcriptomic analysis under terminal water stress conditions, revealed the modulation of antioxidant enzymes, photosystem components, and enzymes representing carbohydrate metabolism and the tricarboxylic acid cycle, indicating that the mutant was exposed to greater oxidative stress than the wild-type plants, but had a limited capacity to respond. We also compared the two genotypes under irrigated and rain-fed field conditions over three years, finding that the greater oxidative stress and corresponding molecular changes in the pale-green mutant were associated to a yield reduction. Conclusions This study provides insight on the effect of pigment content in the molecular response to drought. Identified genes differentially expressed under terminal water stress may be valuable for further studies addressing drought resistance in wheat. PMID:24521234

  19. A combination of a dairy product fermented by lactobacilli and galactooligosaccharides shows additive effects on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor.

    PubMed

    Takasugi, Satoshi; Ashida, Kinya; Maruyama, Suyaka; Matsukiyo, Yukari; Kaneko, Tetsuo; Yamaji, Taketo

    2013-06-01

    This study aimed to investigate the effects of a combination of a dairy product fermented by lactobacilli (DFL) and galactooligosaccharides (GOS) on mineral balances in growing rats with hypochlorhydria induced by a proton pump inhibitor (PPI). Three-week-old male rats were assigned to receive one of six diets: a control diet, control diets containing 1.6 or 5.0 % GOS, a DFL diet and DFL diets containing 1.6 or 5.0 % GOS for 9 days. From day 5 of the feeding period, half of the rats fed with control diets were subcutaneously administered with saline, whereas the remaining rats were administered with PPI for 5 days. Calcium (Ca), phosphorus (P), magnesium (Mg), iron (Fe) and zinc (Zn) balances were determined from days 6 to 9. PPI administration significantly decreased the apparent absorption of Ca and Fe and increased urinary P excretion, resulting in decreased Ca, Fe and P retention. GOS dose-dependently increased the apparent absorption of Ca, Mg and Fe and urinary Mg excretion and decreased urinary P excretion. DFL significantly increased the apparent absorption of Ca and Mg and urinary Mg excretion. The combination of DFL and GOS additively affected these parameters, resulting in increased Ca, P and Fe retention, and it further increased the apparent absorption and retention of Zn at 5.0 % GOS. In conclusion, the combination of DFL and GOS improves Ca, P and Fe retention in an additive manner and increases the Zn retention in growing rats with hypochlorhydria induced by PPI.

  20. Male mice housed in groups engage in frequent fighting and show a lower response to additional bone loading than females or individually housed males that do not fight.

    PubMed

    Meakin, Lee B; Sugiyama, Toshihiro; Galea, Gabriel L; Browne, William J; Lanyon, Lance E; Price, Joanna S

    2013-05-01

    Experiments to investigate bone's physiological adaptation to mechanical loading frequently employ models that apply dynamic loads to bones in vivo and assess the changes in mass and architecture that result. It is axiomatic that bones will only show an adaptive response if the applied artificial loading environment differs in a significant way from that to which the bones have been habituated by normal functional loading. It is generally assumed that this normal loading is similar between experimental groups. In the study reported here we found that this was not always the case. Male and female 17-week-old C57BL/6 mice were housed in groups of six, and a single episode (40 cycles) of non-invasive axial loading, engendering 2,200 με on the medial surface of the proximal tibiae in sample mice, was applied to right tibiae on alternate days for two weeks. This engendered an adaptive increase in bone mass in females, but not males. Observation revealed the main difference in behaviour between males and females was that males were involved in fights 1.3 times per hour, whereas the females never fought. We therefore housed all mice individually. In females, there was a similar significant osteogenic response to loading in cortical and trabecular bone of both grouped and individual mice. In contrast, in males, adaptive increases in the loaded compared with non-loaded control bones was only apparent in animals housed individually. Our interpretation of these findings is that the frequent vigorous fighting that occurs between young adult males housed in groups could be sufficient to engender peak strains and strain rates that equal or exceed the stimulus derived from artificial loading. This indicates the importance of ensuring that physical activity is consistent between groups. Reducing the background level of the naturally engendered strain environment allows adaptive responses to artificial loading to be demonstrated at lower loads.

  1. Additive-dominance genetic model analyses for late-maturity alpha-amylase activity in a bread wheat factorial crossing population.

    PubMed

    Rasul, Golam; Glover, Karl D; Krishnan, Padmanaban G; Wu, Jixiang; Berzonsky, William A; Ibrahim, Amir M H

    2015-12-01

    Elevated level of late maturity α-amylase activity (LMAA) can result in low falling number scores, reduced grain quality, and downgrade of wheat (Triticum aestivum L.) class. A mating population was developed by crossing parents with different levels of LMAA. The F2 and F3 hybrids and their parents were evaluated for LMAA, and data were analyzed using the R software package 'qgtools' integrated with an additive-dominance genetic model and a mixed linear model approach. Simulated results showed high testing powers for additive and additive × environment variances, and comparatively low powers for dominance and dominance × environment variances. All variance components and their proportions to the phenotypic variance for the parents and hybrids were significant except for the dominance × environment variance. The estimated narrow-sense heritability and broad-sense heritability for LMAA were 14 and 54%, respectively. High significant negative additive effects for parents suggest that spring wheat cultivars 'Lancer' and 'Chester' can serve as good general combiners, and that 'Kinsman' and 'Seri-82' had negative specific combining ability in some hybrids despite of their own significant positive additive effects, suggesting they can be used as parents to reduce LMAA levels. Seri-82 showed very good general combining ability effect when used as a male parent, indicating the importance of reciprocal effects. High significant negative dominance effects and high-parent heterosis for hybrids demonstrated that the specific hybrid combinations; Chester × Kinsman, 'Lerma52' × Lancer, Lerma52 × 'LoSprout' and 'Janz' × Seri-82 could be generated to produce cultivars with significantly reduced LMAA level.

  2. "The Show"

    ERIC Educational Resources Information Center

    Gehring, John

    2004-01-01

    For the past 16 years, the blue-collar city of Huntington, West Virginia, has rolled out the red carpet to welcome young wrestlers and their families as old friends. They have come to town chasing the same dream for a spot in what many of them call "The Show". For three days, under the lights of an arena packed with 5,000 fans, the…

  3. Novel Flow Cytometry Analyses of Boar Sperm Viability: Can the Addition of Whole Sperm-Rich Fraction Seminal Plasma to Frozen-Thawed Boar Sperm Affect It?

    PubMed Central

    Díaz, Rommy; Boguen, Rodrigo; Martins, Simone Maria Massami Kitamura; Ravagnani, Gisele Mouro; Leal, Diego Feitosa; Oliveira, Melissa de Lima; Muro, Bruno Bracco Donatelli; Parra, Beatriz Martins; Meirelles, Flávio Vieira; Papa, Frederico Ozanan; Dell’Aqua, José Antônio; Alvarenga, Marco Antônio; Moretti, Aníbal de Sant’Anna; Sepúlveda, Néstor

    2016-01-01

    Boar semen cryopreservation remains a challenge due to the extension of cold shock damage. Thus, many alternatives have emerged to improve the quality of frozen-thawed boar sperm. Although the use of seminal plasma arising from boar sperm-rich fraction (SP-SRF) has shown good efficacy; however, the majority of actual sperm evaluation techniques include a single or dual sperm parameter analysis, which overrates the real sperm viability. Within this context, this work was performed to introduce a sperm flow cytometry fourfold stain technique for simultaneous evaluation of plasma and acrosomal membrane integrity and mitochondrial membrane potential. We then used the sperm flow cytometry fourfold stain technique to study the effect of SP-SRF on frozen-thawed boar sperm and further evaluated the effect of this treatment on sperm movement, tyrosine phosphorylation and fertility rate (FR). The sperm fourfold stain technique is accurate (R2 = 0.9356, p > 0.01) for simultaneous evaluation of plasma and acrosomal membrane integrity and mitochondrial membrane potential (IPIAH cells). Centrifugation pre-cryopreservation was not deleterious (p > 0.05) for any analyzed variables. Addition of SP-SRF after cryopreservation was able to improve total and progressive motility (p < 0.05) when boar semen was cryopreserved without SP-SRF; however, it was not able to decrease tyrosine phosphorylation (p > 0.05) or improve IPIAH cells (p > 0.05). FR was not (p > 0.05) statistically increased by the addition of seminal plasma, though females inseminated with frozen-thawed boar semen plus SP-SRF did perform better than those inseminated with sperm lacking seminal plasma. Thus, we conclude that sperm fourfold stain can be used to simultaneously evaluate plasma and acrosomal membrane integrity and mitochondrial membrane potential, and the addition of SP-SRF at thawed boar semen cryopreserved in absence of SP-SRF improve its total and progressive motility. PMID:27529819

  4. Halogen-free ionic liquid as an additive in zinc(II)-selective electrode: surface analyses as correlated to the membrane activity.

    PubMed

    Al-Asousi, Maryam F; Shoukry, Adel F; Bu-Olayan, Abdul Hadi

    2012-05-30

    Two conventional Zn(II) polyvinyl chloride (PVC) membrane electrodes have been prepared and characterized. They were based on dibenzo-24-crown-8 (DBC) as a neutral carrier, dioctyl phthalate (DOP) as a plasticizer, and potassium tetrakis (p-chlorophenyl) borate, KTpClPB or the halogen-free ionic liquid, tetraoctylammonium dodecylbenzene sulfonate [TOA][DBS] as an additive. The use of ionic liquid has been found to enhance the selectivity of the sensor. For each electrode, the surfaces of two membranes were investigated using X-ray photoelectron, ion-scattering spectroscopy and atomic force microscopy. One of the two membranes was conditioned by soaking it for 24 h in a 1.0×10(-3) M Zn(NO(3))(2) solution and the second was soaked in bi-distilled water for the same interval (24 h). Comparing the two surfaces indicated the following: (a) the high selectivity in case of using [TOA][DBS] as an additive is due to the extra mediation caused by the ionic liquid and (b) the working mechanism of the electrode is based on phase equilibrium at the surface of the membrane associated with ion transport through the bulk of the membrane.

  5. Constitutive Analyses of Nontraditional Stabilization Additives

    DTIC Science & Technology

    2004-11-01

    Final report Approved for public release; distribution is unlimited Prepared for Headquarters, U. S. Army Corps of Engineers Washington, DC 20314-1000...program, AT22 Work Package 238, currently sponsored by Headquarters, U.S. Army Corps of Engineers (CECW-EW). This publication was prepared by personnel...Dr. Steve L. Larson and vii Ms. Barbara Tardy, Inorganics Remediation Team, EL. Mr. Tingle and associates prepared this publication under the

  6. Histograms showing variations in oil yield, water yield, and specific gravity of oil from Fischer assay analyses of oil-shale drill cores and cuttings from the Piceance Basin, northwestern Colorado

    USGS Publications Warehouse

    Dietrich, John D.; Brownfield, Michael E.; Johnson, Ronald C.; Mercier, Tracey J.

    2014-01-01

    Recent studies indicate that the Piceance Basin in northwestern Colorado contains over 1.5 trillion barrels of oil in place, making the basin the largest known oil-shale deposit in the world. Previously published histograms display oil-yield variations with depth and widely correlate rich and lean oil-shale beds and zones throughout the basin. Histograms in this report display oil-yield data plotted alongside either water-yield or oil specific-gravity data. Fischer assay analyses of core and cutting samples collected from exploration drill holes penetrating the Eocene Green River Formation in the Piceance Basin can aid in determining the origins of those deposits, as well as estimating the amount of organic matter, halite, nahcolite, and water-bearing minerals. This report focuses only on the oil yield plotted against water yield and oil specific gravity.

  7. In situ sulfur isotopes (δ(34)S and δ(33)S) analyses in sulfides and elemental sulfur using high sensitivity cones combined with the addition of nitrogen by laser ablation MC-ICP-MS.

    PubMed

    Fu, Jiali; Hu, Zhaochu; Zhang, Wen; Yang, Lu; Liu, Yongsheng; Li, Ming; Zong, Keqing; Gao, Shan; Hu, Shenghong

    2016-03-10

    The sulfur isotope is an important geochemical tracer in diverse fields of geosciences. In this study, the effects of three different cone combinations with the addition of N2 on the performance of in situ S isotope analyses were investigated in detail. The signal intensities of S isotopes were improved by a factor of 2.3 and 3.6 using the X skimmer cone combined with the standard sample cone or the Jet sample cone, respectively, compared with the standard arrangement (H skimmer cone combined with the standard sample cone). This signal enhancement is important for the improvement of the precision and accuracy of in situ S isotope analysis at high spatial resolution. Different cone combinations have a significant effect on the mass bias and mass bias stability for S isotopes. Poor precisions of S isotope ratios were obtained using the Jet and X cones combination at their corresponding optimum makeup gas flow when using Ar plasma only. The addition of 4-8 ml min(-1) nitrogen to the central gas flow in laser ablation MC-ICP-MS was found to significantly enlarge the mass bias stability zone at their corresponding optimum makeup gas flow in these three different cone combinations. The polyatomic interferences of OO, SH, OOH were also significantly reduced, and the interference free plateaus of sulfur isotopes became broader and flatter in the nitrogen mode (N2 = 4 ml min(-1)). However, the signal intensity of S was not increased by the addition of nitrogen in this study. The laser fluence and ablation mode had significant effects on sulfur isotope fractionation during the analysis of sulfides and elemental sulfur by laser ablation MC-ICP-MS. The matrix effect among different sulfides and elemental sulfur was observed, but could be significantly reduced by line scan ablation in preference to single spot ablation under the optimized fluence. It is recommended that the d90 values of the particles in pressed powder pellets for accurate and precise S isotope analysis

  8. Sociopolitical Analyses.

    ERIC Educational Resources Information Center

    Van Galen, Jane, Ed.; And Others

    1992-01-01

    This theme issue of the serial "Educational Foundations" contains four articles devoted to the topic of "Sociopolitical Analyses." In "An Interview with Peter L. McLaren," Mary Leach presented the views of Peter L. McLaren on topics of local and national discourses, values, and the politics of difference. Landon E.…

  9. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  10. Chemical Analyses

    NASA Technical Reports Server (NTRS)

    Bulluck, J. W.; Rushing, R. A.

    1994-01-01

    As a preliminary study on the effects of chemical aging of polymer materials MERL and TRI have examined two polymeric materials that are typically used for offshore umbilical applications. These two materials were Tefzel, a copolymer of ethylene and tetrafluoroethylene, and Coflon, polyvinylidene fluoride. The Coflon specimens were cut from pipe sections and exposed to H2S at various temperatures and pressures. One of these specimens was tested for methane permeation, and another for H2S permeation. The Tefzel specimens were cut from .05 mm sheet stock material and were exposed to methanol at elevated temperature and pressure. One of these specimens was exposed to methanol permeation for 2 days at 100 C and 2500 psi. An additional specimen was exposed to liquid methanol for 3 days at 150 C and 15 Bar. Virgin specimens of each material were similarly prepared and tested.

  11. Food additives

    MedlinePlus

    ... or natural. Natural food additives include: Herbs or spices to add flavor to foods Vinegar for pickling ... Certain colors improve the appearance of foods. Many spices, as well as natural and man-made flavors, ...

  12. Television Quiz Show Simulation

    ERIC Educational Resources Information Center

    Hill, Jonnie Lynn

    2007-01-01

    This article explores the simulation of four television quiz shows for students in China studying English as a foreign language (EFL). It discusses the adaptation and implementation of television quiz shows and how the students reacted to them.

  13. Planning a Successful Tech Show

    ERIC Educational Resources Information Center

    Nikirk, Martin

    2011-01-01

    Tech shows are a great way to introduce prospective students, parents, and local business and industry to a technology and engineering or career and technical education program. In addition to showcasing instructional programs, a tech show allows students to demonstrate their professionalism and skills, practice public presentations, and interact…

  14. The Great Cometary Show

    NASA Astrophysics Data System (ADS)

    2007-01-01

    its high spatial and spectral resolution, it was possible to zoom into the very heart of this very massive star. In this innermost region, the observations are dominated by the extremely dense stellar wind that totally obscures the underlying central star. The AMBER observations show that this dense stellar wind is not spherically symmetric, but exhibits a clearly elongated structure. Overall, the AMBER observations confirm that the extremely high mass loss of Eta Carinae's massive central star is non-spherical and much stronger along the poles than in the equatorial plane. This is in agreement with theoretical models that predict such an enhanced polar mass-loss in the case of rapidly rotating stars. ESO PR Photo 06c/07 ESO PR Photo 06c/07 RS Ophiuchi in Outburst Several papers from this special feature focus on the later stages in a star's life. One looks at the binary system Gamma 2 Velorum, which contains the closest example of a star known as a Wolf-Rayet. A single AMBER observation allowed the astronomers to separate the spectra of the two components, offering new insights in the modeling of Wolf-Rayet stars, but made it also possible to measure the separation between the two stars. This led to a new determination of the distance of the system, showing that previous estimates were incorrect. The observations also revealed information on the region where the winds from the two stars collide. The famous binary system RS Ophiuchi, an example of a recurrent nova, was observed just 5 days after it was discovered to be in outburst on 12 February 2006, an event that has been expected for 21 years. AMBER was able to detect the extension of the expanding nova emission. These observations show a complex geometry and kinematics, far from the simple interpretation of a spherical fireball in extension. AMBER has detected a high velocity jet probably perpendicular to the orbital plane of the binary system, and allowed a precise and careful study of the wind and the shockwave

  15. "Show and Tell" Persuasion

    ERIC Educational Resources Information Center

    Miller, Virgil R.

    2004-01-01

    Objective: To engage in the process of formulating compelling persuasive arguments. Type of speech: Persuasive. Point value: Incorporated into participation points. Requirements: (a) References: 0; (b) Length: 1-2 minutes; (c) Visual aid: No; (d) Outline: No; (e) Prerequisite reading: Chapter 19 (DeVito, 2003); (f) Additional requirements: None.…

  16. Spacelab Charcoal Analyses

    NASA Technical Reports Server (NTRS)

    Slivon, L. E.; Hernon-Kenny, L. A.; Katona, V. R.; Dejarme, L. E.

    1995-01-01

    This report describes analytical methods and results obtained from chemical analysis of 31 charcoal samples in five sets. Each set was obtained from a single scrubber used to filter ambient air on board a Spacelab mission. Analysis of the charcoal samples was conducted by thermal desorption followed by gas chromatography/mass spectrometry (GC/MS). All samples were analyzed using identical methods. The method used for these analyses was able to detect compounds independent of their polarity or volatility. In addition to the charcoal samples, analyses of three Environmental Control and Life Support System (ECLSS) water samples were conducted specifically for trimethylamine.

  17. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  18. Phosphazene additives

    DOEpatents

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  19. Epidemiology of Type 1 Diabetes Mellitus in Korea through an Investigation of the National Registration Project of Type 1 Diabetes for the Reimbursement of Glucometer Strips with Additional Analyses Using Claims Data

    PubMed Central

    Song, Sun Ok; Nam, Joo Young; Park, Kyeong Hye; Yoon, Ji-Hae; Son, Kyung-Mi; Ko, Young; Lim, Dong-Ha

    2016-01-01

    Background The aim of this study was to estimate the prevalence and incidence of type 1 diabetes mellitus (T1DM) in Korea. In addition, we planned to do a performance analysis of the Registration Project of Type 1 diabetes for the reimbursement of consumable materials. Methods To obtain nationwide data on the incidence and prevalence of T1DM, we extracted claims data from July 2011 to August 2013 from the Registration Project of Type 1 diabetes on the reimbursement of consumable materials in the National Health Insurance (NHI) Database. For a more detailed analysis of the T1DM population in Korea, stratification by gender, age, and area was performed, and prevalence and incidence were calculated. Results Of the 8,256 subjects enrolled over the 26 months, the male to female ratio was 1 to 1.12, the median age was 37.1 years, and an average of 136 new T1DM patients were registered to the T1DM registry each month, resulting in 1,632 newly diagnosed T1DM patients each year. We found that the incidence rate of new T1DM cases was 3.28 per 100,000 people. The average proportion of T1DM patients compared with each region's population was 0.0125%. The total number of insurance subscribers under the universal compulsory NHI in Korea was 49,662,097, and the total number of diabetes patients, excluding duplication, was 3,762,332. Conclusion The prevalence of T1DM over the course of the study was approximately 0.017% to 0.021% of the entire population of Korea, and the annual incidence of T1DM was 3.28:100,000 overall and 3.25:100,000 for Koreans under 20 years old. PMID:26912154

  20. Showing What They Know

    ERIC Educational Resources Information Center

    Cech, Scott J.

    2008-01-01

    Having students show their skills in three dimensions, known as performance-based assessment, dates back at least to Socrates. Individual schools such as Barrington High School--located just outside of Providence--have been requiring students to actively demonstrate their knowledge for years. The Rhode Island's high school graduating class became…

  1. The Ozone Show.

    ERIC Educational Resources Information Center

    Mathieu, Aaron

    2000-01-01

    Uses a talk show activity for a final assessment tool for students to debate about the ozone hole. Students are assessed on five areas: (1) cooperative learning; (2) the written component; (3) content; (4) self-evaluation; and (5) peer evaluation. (SAH)

  2. What Do Maps Show?

    ERIC Educational Resources Information Center

    Geological Survey (Dept. of Interior), Reston, VA.

    This curriculum packet, appropriate for grades 4-8, features a teaching poster which shows different types of maps (different views of Salt Lake City, Utah), as well as three reproducible maps and reproducible activity sheets which complement the maps. The poster provides teacher background, including step-by-step lesson plans for four geography…

  3. Show Me the Way

    ERIC Educational Resources Information Center

    Dicks, Matthew J.

    2005-01-01

    Because today's students have grown up steeped in video games and the Internet, most of them expect feedback, and usually gratification, very soon after they expend effort on a task. Teachers can get quick feedback to students by showing them videotapes of their learning performances. The author, a 3rd grade teacher describes how the seemingly…

  4. Chemistry Game Shows

    NASA Astrophysics Data System (ADS)

    Campbell, Susan; Muzyka, Jennifer

    2002-04-01

    We present a technological improvement to the use of game shows to help students review for tests. Our approach uses HTML files interpreted with a browser on a computer attached to an LCD projector. The HTML files can be easily modified for use of the game in a variety of courses.

  5. Honored Teacher Shows Commitment.

    ERIC Educational Resources Information Center

    Ratte, Kathy

    1987-01-01

    Part of the acceptance speech of the 1985 National Council for the Social Studies Teacher of the Year, this article describes the censorship experience of this honored social studies teacher. The incident involved the showing of a videotape version of the feature film entitled "The Seduction of Joe Tynan." (JDH)

  6. Talk Show Science.

    ERIC Educational Resources Information Center

    Moore, Mitzi Ruth

    1992-01-01

    Proposes having students perform skits in which they play the roles of the science concepts they are trying to understand. Provides the dialog for a skit in which hot and cold gas molecules are interviewed on a talk show to study how these properties affect wind, rain, and other weather phenomena. (MDH)

  7. Stage a Water Show

    ERIC Educational Resources Information Center

    Frasier, Debra

    2008-01-01

    In the author's book titled "The Incredible Water Show," the characters from "Miss Alaineus: A Vocabulary Disaster" used an ocean of information to stage an inventive performance about the water cycle. In this article, the author relates how she turned the story into hands-on science teaching for real-life fifth-grade students. The author also…

  8. Not a "reality" show.

    PubMed

    Wrong, Terence; Baumgart, Erica

    2013-01-01

    The authors of the preceding articles raise legitimate questions about patient and staff rights and the unintended consequences of allowing ABC News to film inside teaching hospitals. We explain why we regard their fears as baseless and not supported by what we heard from individuals portrayed in the filming, our decade-long experience making medical documentaries, and the full un-aired context of the scenes shown in the broadcast. The authors don't and can't know what conversations we had, what documents we reviewed, and what protections we put in place in each televised scene. Finally, we hope to correct several misleading examples cited by the authors as well as their offhand mischaracterization of our program as a "reality" show.

  9. Public medical shows.

    PubMed

    Walusinski, Olivier

    2014-01-01

    In the second half of the 19th century, Jean-Martin Charcot (1825-1893) became famous for the quality of his teaching and his innovative neurological discoveries, bringing many French and foreign students to Paris. A hunger for recognition, together with progressive and anticlerical ideals, led Charcot to invite writers, journalists, and politicians to his lessons, during which he presented the results of his work on hysteria. These events became public performances, for which physicians and patients were transformed into actors. Major newspapers ran accounts of these consultations, more like theatrical shows in some respects. The resultant enthusiasm prompted other physicians in Paris and throughout France to try and imitate them. We will compare the form and substance of Charcot's lessons with those given by Jules-Bernard Luys (1828-1897), Victor Dumontpallier (1826-1899), Ambroise-Auguste Liébault (1823-1904), Hippolyte Bernheim (1840-1919), Joseph Grasset (1849-1918), and Albert Pitres (1848-1928). We will also note their impact on contemporary cinema and theatre.

  10. Stretched View Showing 'Victoria'

    NASA Technical Reports Server (NTRS)

    2006-01-01

    [figure removed for brevity, see original site] Stretched View Showing 'Victoria'

    This pair of images from the panoramic camera on NASA's Mars Exploration Rover Opportunity served as initial confirmation that the two-year-old rover is within sight of 'Victoria Crater,' which it has been approaching for more than a year. Engineers on the rover team were unsure whether Opportunity would make it as far as Victoria, but scientists hoped for the chance to study such a large crater with their roving geologist. Victoria Crater is 800 meters (nearly half a mile) in diameter, about six times wider than 'Endurance Crater,' where Opportunity spent several months in 2004 examining rock layers affected by ancient water.

    When scientists using orbital data calculated that they should be able to detect Victoria's rim in rover images, they scrutinized frames taken in the direction of the crater by the panoramic camera. To positively characterize the subtle horizon profile of the crater and some of the features leading up to it, researchers created a vertically-stretched image (top) from a mosaic of regular frames from the panoramic camera (bottom), taken on Opportunity's 804th Martian day (April 29, 2006).

    The stretched image makes mild nearby dunes look like more threatening peaks, but that is only a result of the exaggerated vertical dimension. This vertical stretch technique was first applied to Viking Lander 2 panoramas by Philip Stooke, of the University of Western Ontario, Canada, to help locate the lander with respect to orbiter images. Vertically stretching the image allows features to be more readily identified by the Mars Exploration Rover science team.

    The bright white dot near the horizon to the right of center (barely visible without labeling or zoom-in) is thought to be a light-toned outcrop on the far wall of the crater, suggesting that the rover can see over the low rim of Victoria. In figure 1, the northeast and southeast rims are labeled

  11. HPLC-MS/MS analyses show that the near-Starchless aps1 and pgm leaves accumulate wild type levels of ADPglucose: further evidence for the occurrence of important ADPglucose biosynthetic pathway(s) alternative to the pPGI-pPGM-AGP pathway.

    PubMed

    Bahaji, Abdellatif; Baroja-Fernández, Edurne; Sánchez-López, Angela María; Muñoz, Francisco José; Li, Jun; Almagro, Goizeder; Montero, Manuel; Pujol, Pablo; Galarza, Regina; Kaneko, Kentaro; Oikawa, Kazusato; Wada, Kaede; Mitsui, Toshiaki; Pozueta-Romero, Javier

    2014-01-01

    In leaves, it is widely assumed that starch is the end-product of a metabolic pathway exclusively taking place in the chloroplast that (a) involves plastidic phosphoglucomutase (pPGM), ADPglucose (ADPG) pyrophosphorylase (AGP) and starch synthase (SS), and (b) is linked to the Calvin-Benson cycle by means of the plastidic phosphoglucose isomerase (pPGI). This view also implies that AGP is the sole enzyme producing the starch precursor molecule, ADPG. However, mounting evidence has been compiled pointing to the occurrence of important sources, other than the pPGI-pPGM-AGP pathway, of ADPG. To further explore this possibility, in this work two independent laboratories have carried out HPLC-MS/MS analyses of ADPG content in leaves of the near-starchless pgm and aps1 mutants impaired in pPGM and AGP, respectively, and in leaves of double aps1/pgm mutants grown under two different culture conditions. We also measured the ADPG content in wild type (WT) and aps1 leaves expressing in the plastid two different ADPG cleaving enzymes, and in aps1 leaves expressing in the plastid GlgC, a bacterial AGP. Furthermore, we measured the ADPG content in ss3/ss4/aps1 mutants impaired in starch granule initiation and chloroplastic ADPG synthesis. We found that, irrespective of their starch contents, pgm and aps1 leaves, WT and aps1 leaves expressing in the plastid ADPG cleaving enzymes, and aps1 leaves expressing in the plastid GlgC accumulate WT ADPG content. In clear contrast, ss3/ss4/aps1 leaves accumulated ca. 300 fold-more ADPG than WT leaves. The overall data showed that, in Arabidopsis leaves, (a) there are important ADPG biosynthetic pathways, other than the pPGI-pPGM-AGP pathway, (b) pPGM and AGP are not major determinants of intracellular ADPG content, and (c) the contribution of the chloroplastic ADPG pool to the total ADPG pool is low.

  12. National Orange Show Photovoltaic Demonstration

    SciTech Connect

    Dan Jimenez Sheri Raborn, CPA; Tom Baker

    2008-03-31

    National Orange Show Photovoltaic Demonstration created a 400KW Photovoltaic self-generation plant at the National Orange Show Events Center (NOS). The NOS owns a 120-acre state fairground where it operates an events center and produces an annual citrus fair known as the Orange Show. The NOS governing board wanted to employ cost-saving programs for annual energy expenses. It is hoped the Photovoltaic program will result in overall savings for the NOS, help reduce the State's energy demands as relating to electrical power consumption, improve quality of life within the affected grid area as well as increase the energy efficiency of buildings at our venue. In addition, the potential to reduce operational expenses would have a tremendous effect on the ability of the NOS to service its community.

  13. Uncertainty and Sensitivity Analyses Plan

    SciTech Connect

    Simpson, J.C.; Ramsdell, J.V. Jr.

    1993-04-01

    Hanford Environmental Dose Reconstruction (HEDR) Project staff are developing mathematical models to be used to estimate the radiation dose that individuals may have received as a result of emissions since 1944 from the US Department of Energy's (DOE) Hanford Site near Richland, Washington. An uncertainty and sensitivity analyses plan is essential to understand and interpret the predictions from these mathematical models. This is especially true in the case of the HEDR models where the values of many parameters are unknown. This plan gives a thorough documentation of the uncertainty and hierarchical sensitivity analysis methods recommended for use on all HEDR mathematical models. The documentation includes both technical definitions and examples. In addition, an extensive demonstration of the uncertainty and sensitivity analysis process is provided using actual results from the Hanford Environmental Dose Reconstruction Integrated Codes (HEDRIC). This demonstration shows how the approaches used in the recommended plan can be adapted for all dose predictions in the HEDR Project.

  14. 10 CFR 436.24 - Uncertainty analyses.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Uncertainty analyses. 436.24 Section 436.24 Energy... Procedures for Life Cycle Cost Analyses § 436.24 Uncertainty analyses. If particular items of cost data or... by conducting additional analyses using any standard engineering economics method such as...

  15. 10 CFR 436.24 - Uncertainty analyses.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Uncertainty analyses. 436.24 Section 436.24 Energy... Procedures for Life Cycle Cost Analyses § 436.24 Uncertainty analyses. If particular items of cost data or... by conducting additional analyses using any standard engineering economics method such as...

  16. Additive interaction between heterogeneous environmental ...

    EPA Pesticide Factsheets

    BACKGROUND Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI) domain indices on preterm birth in the Unites States from 2000-2005.METHODS: The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built and sociodemographic) using principal component analyses. County-level preterm birth rates (n=3141) were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PD) and 95% confidence intervals (CI) comparing worse environmental quality to the better quality for each model for a) each individual domain main effect b) the interaction contrast and c) the two main effects plus interaction effect (i.e. the “net effect”) to show departure from additive interaction for the all U.S counties. Analyses were also performed for subgroupings by four urban/rural strata. RESULTS: We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction) associations. In the non-stratified model, we observed antagonistic interac

  17. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  18. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  19. Network Class Superposition Analyses

    PubMed Central

    Pearson, Carl A. B.; Zeng, Chen; Simha, Rahul

    2013-01-01

    Networks are often used to understand a whole system by modeling the interactions among its pieces. Examples include biomolecules in a cell interacting to provide some primary function, or species in an environment forming a stable community. However, these interactions are often unknown; instead, the pieces' dynamic states are known, and network structure must be inferred. Because observed function may be explained by many different networks (e.g., for the yeast cell cycle process [1]), considering dynamics beyond this primary function means picking a single network or suitable sample: measuring over all networks exhibiting the primary function is computationally infeasible. We circumvent that obstacle by calculating the network class ensemble. We represent the ensemble by a stochastic matrix , which is a transition-by-transition superposition of the system dynamics for each member of the class. We present concrete results for derived from Boolean time series dynamics on networks obeying the Strong Inhibition rule, by applying to several traditional questions about network dynamics. We show that the distribution of the number of point attractors can be accurately estimated with . We show how to generate Derrida plots based on . We show that -based Shannon entropy outperforms other methods at selecting experiments to further narrow the network structure. We also outline an experimental test of predictions based on . We motivate all of these results in terms of a popular molecular biology Boolean network model for the yeast cell cycle, but the methods and analyses we introduce are general. We conclude with open questions for , for example, application to other models, computational considerations when scaling up to larger systems, and other potential analyses. PMID:23565141

  20. Network class superposition analyses.

    PubMed

    Pearson, Carl A B; Zeng, Chen; Simha, Rahul

    2013-01-01

    Networks are often used to understand a whole system by modeling the interactions among its pieces. Examples include biomolecules in a cell interacting to provide some primary function, or species in an environment forming a stable community. However, these interactions are often unknown; instead, the pieces' dynamic states are known, and network structure must be inferred. Because observed function may be explained by many different networks (e.g., ≈ 10(30) for the yeast cell cycle process), considering dynamics beyond this primary function means picking a single network or suitable sample: measuring over all networks exhibiting the primary function is computationally infeasible. We circumvent that obstacle by calculating the network class ensemble. We represent the ensemble by a stochastic matrix T, which is a transition-by-transition superposition of the system dynamics for each member of the class. We present concrete results for T derived from boolean time series dynamics on networks obeying the Strong Inhibition rule, by applying T to several traditional questions about network dynamics. We show that the distribution of the number of point attractors can be accurately estimated with T. We show how to generate Derrida plots based on T. We show that T-based Shannon entropy outperforms other methods at selecting experiments to further narrow the network structure. We also outline an experimental test of predictions based on T. We motivate all of these results in terms of a popular molecular biology boolean network model for the yeast cell cycle, but the methods and analyses we introduce are general. We conclude with open questions for T, for example, application to other models, computational considerations when scaling up to larger systems, and other potential analyses.

  1. 15. Detail showing lower chord pinconnected to vertical member, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Detail showing lower chord pin-connected to vertical member, showing floor beam riveted to extension of vertical member below pin-connection, and showing brackets supporting cantilevered sidewalk. View to southwest. - Selby Avenue Bridge, Spanning Short Line Railways track at Selby Avenue between Hamline & Snelling Avenues, Saint Paul, Ramsey County, MN

  2. HER2 codon 655 polymorphism and breast cancer: results from kin-cohort and case-control analyses.

    PubMed

    Millikan, Robert C; Hummer, Amanda J; Wolff, Mary S; Hishida, Asahi; Begg, Colin B

    2005-02-01

    Several published epidemiologic studies show increased breast cancer risk for carriers of the Val-allele at codon 655 of the HER2 gene. We conducted additional analyses using data from three studies, including case-control analyses stratified on age and kin-cohort analyses using relatives of cases and controls. The results provide additional evidence that HER2 codon 655 genotype may predispose to early-onset breast cancer.

  3. Hey Teacher, Your Personality's Showing!

    ERIC Educational Resources Information Center

    Paulsen, James R.

    1977-01-01

    A study of 30 fourth, fifth, and sixth grade teachers and 300 of their students showed that a teacher's age, sex, and years of experience did not relate to students' mathematics achievement, but that more effective teachers showed greater "freedom from defensive behavior" than did less effective teachers. (DT)

  4. Microsatellite analyses of blacktip reef sharks (Carcharhinus melanopterus) in a fragmented environment show structured clusters.

    PubMed

    Vignaud, Thomas; Clua, Eric; Mourier, Johann; Maynard, Jeffrey; Planes, Serge

    2013-01-01

    The population dynamics of shark species are generally poorly described because highly mobile marine life is challenging to investigate. Here we investigate the genetic population structure of the blacktip reef shark (Carcharhinus melanopterus) in French Polynesia. Five demes were sampled from five islands with different inter-island distances (50-1500 km). Whether dispersal occurs between islands frequently enough to prevent moderate genetic structure is unknown. We used 11 microsatellites loci from 165 individuals and a strong genetic structure was found among demes with both F-statistics and Bayesian approaches. This differentiation is correlated with the geographic distance between islands. It is likely that the genetic structure seen is the result of all or some combination of the following: low gene flow, time since divergence, small effective population sizes, and the standard issues with the extent to which mutation models actually fit reality. We suggest low levels of gene flow as at least a partial explanation of the level of genetic structure seen among the sampled blacktip demes. This explanation is consistent with the ecological traits of blacktip reef sharks, and that the suitable habitat for blacktips in French Polynesia is highly fragmented. Evidence for spatial genetic structure of the blacktip demes we studied highlights that similar species may have populations with as yet undetected or underestimated structure. Shark biology and the market for their fins make them highly vulnerable and many species are in rapid decline. Our results add weight to the case that total bans on shark fishing are a better conservation approach for sharks than marine protected area networks.

  5. Microsatellite Analyses of Blacktip Reef Sharks (Carcharhinus melanopterus) in a Fragmented Environment Show Structured Clusters

    PubMed Central

    Vignaud, Thomas; Clua, Eric; Mourier, Johann; Maynard, Jeffrey; Planes, Serge

    2013-01-01

    The population dynamics of shark species are generally poorly described because highly mobile marine life is challenging to investigate. Here we investigate the genetic population structure of the blacktip reef shark (Carcharhinus melanopterus) in French Polynesia. Five demes were sampled from five islands with different inter-island distances (50–1500 km). Whether dispersal occurs between islands frequently enough to prevent moderate genetic structure is unknown. We used 11 microsatellites loci from 165 individuals and a strong genetic structure was found among demes with both F-statistics and Bayesian approaches. This differentiation is correlated with the geographic distance between islands. It is likely that the genetic structure seen is the result of all or some combination of the following: low gene flow, time since divergence, small effective population sizes, and the standard issues with the extent to which mutation models actually fit reality. We suggest low levels of gene flow as at least a partial explanation of the level of genetic structure seen among the sampled blacktip demes. This explanation is consistent with the ecological traits of blacktip reef sharks, and that the suitable habitat for blacktips in French Polynesia is highly fragmented. Evidence for spatial genetic structure of the blacktip demes we studied highlights that similar species may have populations with as yet undetected or underestimated structure. Shark biology and the market for their fins make them highly vulnerable and many species are in rapid decline. Our results add weight to the case that total bans on shark fishing are a better conservation approach for sharks than marine protected area networks. PMID:23585872

  6. Satellite Animation Shows California Storms

    NASA Video Gallery

    This animation of visible and infrared imagery from NOAA's GOES-West satellite shows a series of moisture-laden storms affecting California from Jan. 6 through Jan. 9, 2017. TRT: 00:36 Credit: NASA...

  7. Satellite Movie Shows Erika Dissipate

    NASA Video Gallery

    This animation of visible and infrared imagery from NOAA's GOES-West satellite from Aug. 27 to 29 shows Tropical Storm Erika move through the Eastern Caribbean Sea and dissipate near eastern Cuba. ...

  8. 49 CFR 1180.7 - Market analyses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 8 2011-10-01 2011-10-01 false Market analyses. 1180.7 Section 1180.7..., TRACKAGE RIGHTS, AND LEASE PROCEDURES General Acquisition Procedures § 1180.7 Market analyses. (a) For... identify and address relevant markets and issues, and provide additional information as requested by...

  9. 49 CFR 1180.7 - Market analyses.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Market analyses. 1180.7 Section 1180.7..., TRACKAGE RIGHTS, AND LEASE PROCEDURES General Acquisition Procedures § 1180.7 Market analyses. (a) For... identify and address relevant markets and issues, and provide additional information as requested by...

  10. 10 CFR 436.24 - Uncertainty analyses.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Procedures for Life Cycle Cost Analyses § 436.24 Uncertainty analyses. If particular items of cost data or... impact of uncertainty on the calculation of life cycle cost effectiveness or the assignment of rank order... and probabilistic analysis. If additional analysis casts substantial doubt on the life cycle...

  11. 10 CFR 436.24 - Uncertainty analyses.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Procedures for Life Cycle Cost Analyses § 436.24 Uncertainty analyses. If particular items of cost data or... impact of uncertainty on the calculation of life cycle cost effectiveness or the assignment of rank order... and probabilistic analysis. If additional analysis casts substantial doubt on the life cycle...

  12. 10 CFR 436.24 - Uncertainty analyses.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Procedures for Life Cycle Cost Analyses § 436.24 Uncertainty analyses. If particular items of cost data or... impact of uncertainty on the calculation of life cycle cost effectiveness or the assignment of rank order... and probabilistic analysis. If additional analysis casts substantial doubt on the life cycle...

  13. Phyllodes tumor showing intraductal growth.

    PubMed

    Makidono, Akari; Tsunoda, Hiroko; Mori, Miki; Yagata, Hiroshi; Onoda, Yui; Kikuchi, Mari; Nozaki, Taiki; Saida, Yukihisa; Nakamura, Seigo; Suzuki, Koyu

    2013-07-01

    Phyllodes tumor of the breast is a rare fibroepithelial lesion and particularly uncommon in adolescent girls. It is thought to arise from the periductal rather than intralobular stroma. Usually, it is seen as a well-defined mass. Phyllodes tumor showing intraductal growth is extremely rare. Here we report a girl who has a phyllodes tumor with intraductal growth.

  14. Magic Carpet Shows Its Colors

    NASA Technical Reports Server (NTRS)

    2004-01-01

    The upper left image in this display is from the panoramic camera on the Mars Exploration Rover Spirit, showing the 'Magic Carpet' region near the rover at Gusev Crater, Mars, on Sol 7, the seventh martian day of its journey (Jan. 10, 2004). The lower image, also from the panoramic camera, is a monochrome (single filter) image of a rock in the 'Magic Carpet' area. Note that colored portions of the rock correlate with extracted spectra shown in the plot to the side. Four different types of materials are shown: the rock itself, the soil in front of the rock, some brighter soil on top of the rock, and some dust that has collected in small recesses on the rock face ('spots'). Each color on the spectra matches a line on the graph, showing how the panoramic camera's different colored filters are used to broadly assess the varying mineral compositions of martian rocks and soils.

  15. Fractal and multifractal analyses of bipartite networks.

    PubMed

    Liu, Jin-Long; Wang, Jian; Yu, Zu-Guo; Xie, Xian-Hua

    2017-03-31

    Bipartite networks have attracted considerable interest in various fields. Fractality and multifractality of unipartite (classical) networks have been studied in recent years, but there is no work to study these properties of bipartite networks. In this paper, we try to unfold the self-similarity structure of bipartite networks by performing the fractal and multifractal analyses for a variety of real-world bipartite network data sets and models. First, we find the fractality in some bipartite networks, including the CiteULike, Netflix, MovieLens (ml-20m), Delicious data sets and (u, v)-flower model. Meanwhile, we observe the shifted power-law or exponential behavior in other several networks. We then focus on the multifractal properties of bipartite networks. Our results indicate that the multifractality exists in those bipartite networks possessing fractality. To capture the inherent attribute of bipartite network with two types different nodes, we give the different weights for the nodes of different classes, and show the existence of multifractality in these node-weighted bipartite networks. In addition, for the data sets with ratings, we modify the two existing algorithms for fractal and multifractal analyses of edge-weighted unipartite networks to study the self-similarity of the corresponding edge-weighted bipartite networks. The results show that our modified algorithms are feasible and can effectively uncover the self-similarity structure of these edge-weighted bipartite networks and their corresponding node-weighted versions.

  16. Fractal and multifractal analyses of bipartite networks

    PubMed Central

    Liu, Jin-Long; Wang, Jian; Yu, Zu-Guo; Xie, Xian-Hua

    2017-01-01

    Bipartite networks have attracted considerable interest in various fields. Fractality and multifractality of unipartite (classical) networks have been studied in recent years, but there is no work to study these properties of bipartite networks. In this paper, we try to unfold the self-similarity structure of bipartite networks by performing the fractal and multifractal analyses for a variety of real-world bipartite network data sets and models. First, we find the fractality in some bipartite networks, including the CiteULike, Netflix, MovieLens (ml-20m), Delicious data sets and (u, v)-flower model. Meanwhile, we observe the shifted power-law or exponential behavior in other several networks. We then focus on the multifractal properties of bipartite networks. Our results indicate that the multifractality exists in those bipartite networks possessing fractality. To capture the inherent attribute of bipartite network with two types different nodes, we give the different weights for the nodes of different classes, and show the existence of multifractality in these node-weighted bipartite networks. In addition, for the data sets with ratings, we modify the two existing algorithms for fractal and multifractal analyses of edge-weighted unipartite networks to study the self-similarity of the corresponding edge-weighted bipartite networks. The results show that our modified algorithms are feasible and can effectively uncover the self-similarity structure of these edge-weighted bipartite networks and their corresponding node-weighted versions. PMID:28361962

  17. NOAA's National Snow Analyses

    NASA Astrophysics Data System (ADS)

    Carroll, T. R.; Cline, D. W.; Olheiser, C. M.; Rost, A. A.; Nilsson, A. O.; Fall, G. M.; Li, L.; Bovitz, C. T.

    2005-12-01

    NOAA's National Operational Hydrologic Remote Sensing Center (NOHRSC) routinely ingests all of the electronically available, real-time, ground-based, snow data; airborne snow water equivalent data; satellite areal extent of snow cover information; and numerical weather prediction (NWP) model forcings for the coterminous U.S. The NWP model forcings are physically downscaled from their native 13 km2 spatial resolution to a 1 km2 resolution for the CONUS. The downscaled NWP forcings drive an energy-and-mass-balance snow accumulation and ablation model at a 1 km2 spatial resolution and at a 1 hour temporal resolution for the country. The ground-based, airborne, and satellite snow observations are assimilated into the snow model's simulated state variables using a Newtonian nudging technique. The principle advantages of the assimilation technique are: (1) approximate balance is maintained in the snow model, (2) physical processes are easily accommodated in the model, and (3) asynoptic data are incorporated at the appropriate times. The snow model is reinitialized with the assimilated snow observations to generate a variety of snow products that combine to form NOAA's NOHRSC National Snow Analyses (NSA). The NOHRSC NSA incorporate all of the available information necessary and available to produce a "best estimate" of real-time snow cover conditions at 1 km2 spatial resolution and 1 hour temporal resolution for the country. The NOHRSC NSA consist of a variety of daily, operational, products that characterize real-time snowpack conditions including: snow water equivalent, snow depth, surface and internal snowpack temperatures, surface and blowing snow sublimation, and snowmelt for the CONUS. The products are generated and distributed in a variety of formats including: interactive maps, time-series, alphanumeric products (e.g., mean areal snow water equivalent on a hydrologic basin-by-basin basis), text and map discussions, map animations, and quantitative gridded products

  18. "Medicine show." Alice in Doctorland.

    PubMed

    1987-01-01

    This is an excerpt from the script of a 1939 play provided to the Institute of Social Medicine and Community Health by the Library of Congress Federal Theater Project Collection at George Mason University Library, Fairfax, Virginia, pages 2-1-8 thru 2-1-14. The Federal Theatre Project (FTP) was part of the New Deal program for the arts 1935-1939. Funded by the Works Progress Administration (WPA) its goal was to employ theater professionals from the relief rolls. A number of FTP plays deal with aspects of medicine and public health. Pageants, puppet shows and documentary plays celebrated progress in medical science while examining social controversies in medical services and the public health movement. "Medicine Show" sharply contrasts technological wonders with social backwardness. The play was rehearsed by the FTP but never opened because funding ended. A revised version ran on Broadway in 1940. The preceding comments are adapted from an excellent, well-illustrated review of five of these plays by Barabara Melosh: "The New Deal's Federal Theatre Project," Medical Heritage, Vol. 2, No. 1 (Jan/Feb 1986), pp. 36-47.

  19. Wavelet Analyses and Applications

    ERIC Educational Resources Information Center

    Bordeianu, Cristian C.; Landau, Rubin H.; Paez, Manuel J.

    2009-01-01

    It is shown how a modern extension of Fourier analysis known as wavelet analysis is applied to signals containing multiscale information. First, a continuous wavelet transform is used to analyse the spectrum of a nonstationary signal (one whose form changes in time). The spectral analysis of such a signal gives the strength of the signal in each…

  20. Apollo 14 microbial analyses

    NASA Technical Reports Server (NTRS)

    Taylor, G. R.

    1972-01-01

    Extensive microbiological analyses that were performed on the Apollo 14 prime and backup crewmembers and ancillary personnel are discussed. The crewmembers were subjected to four separate and quite different environments during the 137-day monitoring period. The relation between each of these environments and observed changes in the microflora of each astronaut are presented.

  1. "Show me" bioethics and politics.

    PubMed

    Christopher, Myra J

    2007-10-01

    Missouri, the "Show Me State," has become the epicenter of several important national public policy debates, including abortion rights, the right to choose and refuse medical treatment, and, most recently, early stem cell research. In this environment, the Center for Practical Bioethics (formerly, Midwest Bioethics Center) emerged and grew. The Center's role in these "cultural wars" is not to advocate for a particular position but to provide well researched and objective information, perspective, and advocacy for the ethical justification of policy positions; and to serve as a neutral convener and provider of a public forum for discussion. In this article, the Center's work on early stem cell research is a case study through which to argue that not only the Center, but also the field of bioethics has a critical role in the politics of public health policy.

  2. Phoenix Scoop Inverted Showing Rasp

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This image taken by the Surface Stereo Imager on Sol 49, or the 49th Martian day of the mission (July 14, 2008), shows the silver colored rasp protruding from NASA's Phoenix Mars Lander's Robotic Arm scoop. The scoop is inverted and the rasp is pointing up.

    Shown with its forks pointing toward the ground is the thermal and electrical conductivity probe, at the lower right. The Robotic Arm Camera is pointed toward the ground.

    The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is led by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  3. ShowMe3D

    SciTech Connect

    Sinclair, Michael B

    2012-01-05

    ShowMe3D is a data visualization graphical user interface specifically designed for use with hyperspectral image obtained from the Hyperspectral Confocal Microscope. The program allows the user to select and display any single image from a three dimensional hyperspectral image stack. By moving a slider control, the user can easily move between images of the stack. The user can zoom into any region of the image. The user can select any pixel or region from the displayed image and display the fluorescence spectrum associated with that pixel or region. The user can define up to 3 spectral filters to apply to the hyperspectral image and view the image as it would appear from a filter-based confocal microscope. The user can also obtain statistics such as intensity average and variance from selected regions.

  4. Platelet additive solution - electrolytes.

    PubMed

    Azuma, Hiroshi; Hirayama, Junichi; Akino, Mitsuaki; Ikeda, Hisami

    2011-06-01

    Recent attention to solutions that replace most or all plasma in platelet concentrates, while maintaining satisfactory platelet function, is motivated by the potential of plasma reduction or depletion to mitigate various transfusion-related adverse events. This report considers the electrolytic composition of previously described platelet additive solutions, in order to draw general conclusions about what is required for platelet function and longevity. The optimal concentrations of Na(+) and Cl(-) are 69-115 mM. The presence of both K(+) and Mg(2+) in platelet suspension at nearly physiological concentrations (3-5mM and 1.5-3mM, respectively) is indispensable for good preservation capacity because both electrolytes are required to prevent platelet activation. In contrast to K(+) and Mg(2+), Ca(2+) may not be important because no free Ca(2+) is available in M-sol, which showed excellent platelet preservation capacity at less than 5% plasma concentration. The importance of bicarbonate (approximately 40 mM) can be recognized when the platelets are suspended in additive solution under less than 5% residual plasma concentration.

  5. Casimir experiments showing saturation effects

    SciTech Connect

    Sernelius, Bo E.

    2009-10-15

    We address several different Casimir experiments where theory and experiment disagree. First out is the classical Casimir force measurement between two metal half spaces; here both in the form of the torsion pendulum experiment by Lamoreaux and in the form of the Casimir pressure measurement between a gold sphere and a gold plate as performed by Decca et al.; theory predicts a large negative thermal correction, absent in the high precision experiments. The third experiment is the measurement of the Casimir force between a metal plate and a laser irradiated semiconductor membrane as performed by Chen et al.; the change in force with laser intensity is larger than predicted by theory. The fourth experiment is the measurement of the Casimir force between an atom and a wall in the form of the measurement by Obrecht et al. of the change in oscillation frequency of a {sup 87}Rb Bose-Einstein condensate trapped to a fused silica wall; the change is smaller than predicted by theory. We show that saturation effects can explain the discrepancies between theory and experiment observed in all these cases.

  6. Atmospheric tether mission analyses

    NASA Technical Reports Server (NTRS)

    1996-01-01

    NASA is considering the use of tethered satellites to explore regions of the atmosphere inaccessible to spacecraft or high altitude research balloons. This report summarizes the Lockheed Martin Astronautics (LMA) effort for the engineering study team assessment of an Orbiter-based atmospheric tether mission. Lockheed Martin responsibilities included design recommendations for the deployer and tether, as well as tether dynamic analyses for the mission. Three tether configurations were studied including single line, multistrand (Hoytether) and tape designs.

  7. Mimas Showing False Colors #1

    NASA Technical Reports Server (NTRS)

    2005-01-01

    False color images of Saturn's moon, Mimas, reveal variation in either the composition or texture across its surface.

    During its approach to Mimas on Aug. 2, 2005, the Cassini spacecraft narrow-angle camera obtained multi-spectral views of the moon from a range of 228,000 kilometers (142,500 miles).

    The image at the left is a narrow angle clear-filter image, which was separately processed to enhance the contrast in brightness and sharpness of visible features. The image at the right is a color composite of narrow-angle ultraviolet, green, infrared and clear filter images, which have been specially processed to accentuate subtle changes in the spectral properties of Mimas' surface materials. To create this view, three color images (ultraviolet, green and infrared) were combined into a single black and white picture that isolates and maps regional color differences. This 'color map' was then superimposed over the clear-filter image at the left.

    The combination of color map and brightness image shows how the color differences across the Mimas surface materials are tied to geological features. Shades of blue and violet in the image at the right are used to identify surface materials that are bluer in color and have a weaker infrared brightness than average Mimas materials, which are represented by green.

    Herschel crater, a 140-kilometer-wide (88-mile) impact feature with a prominent central peak, is visible in the upper right of each image. The unusual bluer materials are seen to broadly surround Herschel crater. However, the bluer material is not uniformly distributed in and around the crater. Instead, it appears to be concentrated on the outside of the crater and more to the west than to the north or south. The origin of the color differences is not yet understood. It may represent ejecta material that was excavated from inside Mimas when the Herschel impact occurred. The bluer color of these materials may be caused by subtle differences in

  8. Workload analyse of assembling process

    NASA Astrophysics Data System (ADS)

    Ghenghea, L. D.

    2015-11-01

    The workload is the most important indicator for managers responsible of industrial technological processes no matter if these are automated, mechanized or simply manual in each case, machines or workers will be in the focus of workload measurements. The paper deals with workload analyses made to a most part manual assembling technology for roller bearings assembling process, executed in a big company, with integrated bearings manufacturing processes. In this analyses the delay sample technique have been used to identify and divide all bearing assemblers activities, to get information about time parts from 480 minutes day work time that workers allow to each activity. The developed study shows some ways to increase the process productivity without supplementary investments and also indicated the process automation could be the solution to gain maximum productivity.

  9. Integrated Genomic Analyses of Ovarian Carcinoma

    PubMed Central

    2011-01-01

    Summary The Cancer Genome Atlas (TCGA) project has analyzed mRNA expression, miRNA expression, promoter methylation, and DNA copy number in 489 high-grade serous ovarian adenocarcinomas (HGS-OvCa) and the DNA sequences of exons from coding genes in 316 of these tumors. These results show that HGS-OvCa is characterized by TP53 mutations in almost all tumors (96%); low prevalence but statistically recurrent somatic mutations in 9 additional genes including NF1, BRCA1, BRCA2, RB1, and CDK12; 113 significant focal DNA copy number aberrations; and promoter methylation events involving 168 genes. Analyses delineated four ovarian cancer transcriptional subtypes, three miRNA subtypes, four promoter methylation subtypes, a transcriptional signature associated with survival duration and shed new light on the impact on survival of tumors with BRCA1/2 and CCNE1 aberrations. Pathway analyses suggested that homologous recombination is defective in about half of tumors, and that Notch and FOXM1 signaling are involved in serous ovarian cancer pathophysiology. PMID:21720365

  10. Additive Similarity Trees

    ERIC Educational Resources Information Center

    Sattath, Shmuel; Tversky, Amos

    1977-01-01

    Tree representations of similarity data are investigated. Hierarchical clustering is critically examined, and a more general procedure, called the additive tree, is presented. The additive tree representation is then compared to multidimensional scaling. (Author/JKS)

  11. LDEF Satellite Radiation Analyses

    NASA Technical Reports Server (NTRS)

    Armstrong, T. W.; Colborn, B. L.

    1996-01-01

    Model calculations and analyses have been carried out to compare with several sets of data (dose, induced radioactivity in various experiment samples and spacecraft components, fission foil measurements, and LET spectra) from passive radiation dosimetry on the Long Duration Exposure Facility (LDEF) satellite, which was recovered after almost six years in space. The calculations and data comparisons are used to estimate the accuracy of current models and methods for predicting the ionizing radiation environment in low earth orbit. The emphasis is on checking the accuracy of trapped proton flux and anisotropy models.

  12. Five Kepler target stars that show multiple transiting exoplanet candidates

    SciTech Connect

    Steffen, Jason H.; Batalha, Natalie M.; Borucki, William J.; Buchhave, Lars A.; Caldwell, Douglas A.; Cochran, William D.; Endl, Michael; Fabrycky, Daniel C.; Fressin, Francois; Ford, Eric B.; Fortney, Jonathan J.; /UC, Santa Cruz, Phys. Dept. /NASA, Ames

    2010-06-01

    We present and discuss five candidate exoplanetary systems identified with the Kepler spacecraft. These five systems show transits from multiple exoplanet candidates. Should these objects prove to be planetary in nature, then these five systems open new opportunities for the field of exoplanets and provide new insights into the formation and dynamical evolution of planetary systems. We discuss the methods used to identify multiple transiting objects from the Kepler photometry as well as the false-positive rejection methods that have been applied to these data. One system shows transits from three distinct objects while the remaining four systems show transits from two objects. Three systems have planet candidates that are near mean motion commensurabilities - two near 2:1 and one just outside 5:2. We discuss the implications that multitransiting systems have on the distribution of orbital inclinations in planetary systems, and hence their dynamical histories; as well as their likely masses and chemical compositions. A Monte Carlo study indicates that, with additional data, most of these systems should exhibit detectable transit timing variations (TTV) due to gravitational interactions - though none are apparent in these data. We also discuss new challenges that arise in TTV analyses due to the presence of more than two planets in a system.

  13. FIVE KEPLER TARGET STARS THAT SHOW MULTIPLE TRANSITING EXOPLANET CANDIDATES

    SciTech Connect

    Steffen, Jason H.; Batalha, Natalie M.; Borucki, William J.; Caldwell, Douglas A.; Haas, Michael J.; Jenkins, Jon M.; Koch, David; Lissauer, Jack J.; Buchhave, Lars A.; Fabrycky, Daniel C.; Fressin, Francois; Holman, Matthew J.; Latham, David W.; Cochran, William D.; Endl, Michael; Ford, Eric B.; Moorhead, Althea V.; Fortney, Jonathan J.; Howell, Steve B.; Isaacson, Howard

    2010-12-10

    We present and discuss five candidate exoplanetary systems identified with the Kepler spacecraft. These five systems show transits from multiple exoplanet candidates. Should these objects prove to be planetary in nature, then these five systems open new opportunities for the field of exoplanets and provide new insights into the formation and dynamical evolution of planetary systems. We discuss the methods used to identify multiple transiting objects from the Kepler photometry as well as the false-positive rejection methods that have been applied to these data. One system shows transits from three distinct objects while the remaining four systems show transits from two objects. Three systems have planet candidates that are near mean motion commensurabilities-two near 2:1 and one just outside 5:2. We discuss the implications that multi-transiting systems have on the distribution of orbital inclinations in planetary systems, and hence their dynamical histories, as well as their likely masses and chemical compositions. A Monte Carlo study indicates that, with additional data, most of these systems should exhibit detectable transit timing variations (TTVs) due to gravitational interactions, though none are apparent in these data. We also discuss new challenges that arise in TTV analyses due to the presence of more than two planets in a system.

  14. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  15. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  16. Summary of LDEF battery analyses

    NASA Technical Reports Server (NTRS)

    Johnson, Chris; Thaller, Larry; Bittner, Harlin; Deligiannis, Frank; Tiller, Smith; Sullivan, David; Bene, James

    1992-01-01

    Tests and analyses of NiCd, LiSO2, and LiCf batteries flown on the Long Duration Exposure Facility (LDEF) includes results from NASA, Aerospace, and commercial labs. The LiSO2 cells illustrate six-year degradation of internal components acceptable for space applications, with up to 85 percent battery capacity remaining on discharge of some returned cells. LiCf batteries completed their mission, but lost any remaining capacity due to internal degradation. Returned NiCd batteries tested an GSFC showed slight case distortion due to pressure build up, but were functioning as designed.

  17. EEG analyses with SOBI.

    SciTech Connect

    Glickman, Matthew R.; Tang, Akaysha

    2009-02-01

    The motivating vision behind Sandia's MENTOR/PAL LDRD project has been that of systems which use real-time psychophysiological data to support and enhance human performance, both individually and of groups. Relevant and significant psychophysiological data being a necessary prerequisite to such systems, this LDRD has focused on identifying and refining such signals. The project has focused in particular on EEG (electroencephalogram) data as a promising candidate signal because it (potentially) provides a broad window on brain activity with relatively low cost and logistical constraints. We report here on two analyses performed on EEG data collected in this project using the SOBI (Second Order Blind Identification) algorithm to identify two independent sources of brain activity: one in the frontal lobe and one in the occipital. The first study looks at directional influences between the two components, while the second study looks at inferring gender based upon the frontal component.

  18. Genetic Analyses of Integrin Signaling

    PubMed Central

    Wickström, Sara A.; Radovanac, Korana; Fässler, Reinhard

    2011-01-01

    The development of multicellular organisms, as well as maintenance of organ architecture and function, requires robust regulation of cell fates. This is in part achieved by conserved signaling pathways through which cells process extracellular information and translate this information into changes in proliferation, differentiation, migration, and cell shape. Gene deletion studies in higher eukaryotes have assigned critical roles for components of the extracellular matrix (ECM) and their cellular receptors in a vast number of developmental processes, indicating that a large proportion of this signaling is regulated by cell-ECM interactions. In addition, genetic alterations in components of this signaling axis play causative roles in several human diseases. This review will discuss what genetic analyses in mice and lower organisms have taught us about adhesion signaling in development and disease. PMID:21421914

  19. Comparative sequence analyses of sixteen reptilian paramyxoviruses

    USGS Publications Warehouse

    Ahne, W.; Batts, W.N.; Kurath, G.; Winton, J.R.

    1999-01-01

    Viral genomic RNA of Fer-de-Lance virus (FDLV), a paramyxovirus highly pathogenic for reptiles, was reverse transcribed and cloned. Plasmids with significant sequence similarities to the hemagglutinin-neuraminidase (HN) and polymerase (L) genes of mammalian paramyxoviruses were identified by BLAST search. Partial sequences of the FDLV genes were used to design primers for amplification by nested polymerase chain reaction (PCR) and sequencing of 518-bp L gene and 352-bp HN gene fragments from a collection of 15 previously uncharacterized reptilian paramyxoviruses. Phylogenetic analyses of the partial L and HN sequences produced similar trees in which there were two distinct subgroups of isolates that were supported with maximum bootstrap values, and several intermediate isolates. Within each subgroup the nucleotide divergence values were less than 2.5%, while the divergence between the two subgroups was 20-22%. This indicated that the two subgroups represent distinct virus species containing multiple virus strains. The five intermediate isolates had nucleotide divergence values of 11-20% and may represent additional distinct species. In addition to establishing diversity among reptilian paramyxoviruses, the phylogenetic groupings showed some correlation with geographic location, and clearly demonstrated a low level of host species-specificity within these viruses. Copyright (C) 1999 Elsevier Science B.V.

  20. An assessment of stress analyses in the theory of abfraction.

    PubMed

    Litonjua, Luis A; Andreana, Sebastiano; Patra, Abani K; Cohen, Robert E

    2004-01-01

    Wedged-shaped lesions at the cemento-enamel junction of teeth have been attributed primarily to biomechanical loading forces that cause flexure and failure of enamel and dentin. This theory, termed abfraction, remains controversial. This review examined studies on mechanical properties of enamel and dentin and studies on bite forces and mastication as background information. Abfraction is based principally on a few early finite element analysis and photoelastic models showing stress concentration at the dental cervical area without actually showing enamel and dentin fracture. However, a review of more recent dental stress analyses has been contradictory. Particularly, analyses of the periodontal ligament and alveolar bone, not modeled in previous studies, have shown that those structures may dissipate occlusal loading forces from the cervical areas. In addition, some models may not fully represent intricate dental anatomy and complex occlusal function. Therefore, the key basis of the abfraction theory may be flawed.

  1. 75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    75. Photocopied July 1978. (QMC) VIEW SHOWING (LEFT TO RIGHT) NORTH'S STORE (1900); BLACKSMITH SHOP (C. 1860, WITH ADDITIONS); AND DRYHOUSE (C. 1860, WITH ADDITIONS). C. 1905. - Quincy Mining Company, Hancock, Houghton County, MI

  2. Polylactides in additive biomanufacturing.

    PubMed

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed.

  3. Additive Manufactured Product Integrity

    NASA Technical Reports Server (NTRS)

    Waller, Jess; Wells, Doug; James, Steve; Nichols, Charles

    2017-01-01

    NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

  4. Time series analyses of global change data.

    PubMed

    Lane, L J; Nichols, M H; Osborn, H B

    1994-01-01

    The hypothesis that statistical analyses of historical time series data can be used to separate the influences of natural variations from anthropogenic sources on global climate change is tested. Point, regional, national, and global temperature data are analyzed. Trend analyses for the period 1901-1987 suggest mean annual temperatures increased (in degrees C per century) globally at the rate of about 0.5, in the USA at about 0.3, in the south-western USA desert region at about 1.2, and at the Walnut Gulch Experimental Watershed in south-eastern Arizona at about 0.8. However, the rates of temperature change are not constant but vary within the 87-year period. Serial correlation and spectral density analysis of the temperature time series showed weak periodicities at various frequencies. The only common periodicity among the temperature series is an apparent cycle of about 43 years. The temperature time series were correlated with the Wolf sunspot index, atmospheric CO(2) concentrations interpolated from the Siple ice core data, and atmospheric CO(2) concentration data from Mauna Loa measurements. Correlation analysis of temperature data with concurrent data on atmospheric CO(2) concentrations and the Wolf sunspot index support previously reported significant correlation over the 1901-1987 period. Correlation analysis between temperature, atmospheric CO(2) concentration, and the Wolf sunspot index for the shorter period, 1958-1987, when continuous Mauna Loa CO(2) data are available, suggest significant correlation between global warming and atmospheric CO(2) concentrations but no significant correlation between global warming and the Wolf sunspot index. This may be because the Wolf sunspot index apparently increased from 1901 until about 1960 and then decreased thereafter, while global warming apparently continued to increase through 1987. Correlation of sunspot activity with global warming may be spurious but additional analyses are required to test this hypothesis

  5. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  6. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  7. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  8. NEUTRONICS ANALYSES FOR SNS TARGETS DEPOSITIONS

    SciTech Connect

    Popova, Irina I; Remec, Igor; Gallmeier, Franz X

    2016-01-01

    In order to deposit Spallation Neutron Source (SNS) spent facility components replaced due to end-of-life radiation-induced material damage or burn-up, or because of mechanical failure or design improvements, waste classification analyses are being performed. These analyses include an accurate estimate of the radionuclide inventory, on which base components are classified and an appropriate container for transport and storage is determined. After the choice for the container is made, transport calculations are performed for the facility component to be placed inside the container, ensuring compliance with waste management regulations. When necessary, additional shielding is added. Most of the effort is concentrated on the target deposition, which normally takes place once or twice per year. Additionally, the second target station (STS) is in a process of design and waste management analyses for the STS target are being developed to support a deposition plan

  9. Operator-free flow injection analyser

    PubMed Central

    de Faria, Lourival C.

    1991-01-01

    A flow injection analyser has been constructed to allow an operator-free determination of up to 40 samples. Besides the usual FIA apparatus, the analyser includes a home-made sample introduction device made with three electromechanical three-way valves and an auto-sampler from Technicon which has been adapted to be commanded by an external digital signal. The analyser is controlled by a single board SDK-8085 microcomputer. The necessary interface to couple the analyser components to the microcomputer is also described. The analyser was evaluated for a Cr(VI)-FIA determination showing a very good performance with a relative standard deviation for 15 signals from the injection of 100 μl of a 1.0 mg.ml-1 standard Cr(VI) solution being equal to 0.5%. PMID:18924899

  10. The Large-Scale Structure of Semantic Networks: Statistical Analyses and a Model of Semantic Growth

    ERIC Educational Resources Information Center

    Steyvers, Mark; Tenenbaum, Joshua B.

    2005-01-01

    We present statistical analyses of the large-scale structure of 3 types of semantic networks: word associations, WordNet, and Roget's Thesaurus. We show that they have a small-world structure, characterized by sparse connectivity, short average path lengths between words, and strong local clustering. In addition, the distributions of the number of…

  11. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  12. Group Sparse Additive Models

    PubMed Central

    Yin, Junming; Chen, Xi; Xing, Eric P.

    2016-01-01

    We consider the problem of sparse variable selection in nonparametric additive models, with the prior knowledge of the structure among the covariates to encourage those variables within a group to be selected jointly. Previous works either study the group sparsity in the parametric setting (e.g., group lasso), or address the problem in the nonparametric setting without exploiting the structural information (e.g., sparse additive models). In this paper, we present a new method, called group sparse additive models (GroupSpAM), which can handle group sparsity in additive models. We generalize the ℓ1/ℓ2 norm to Hilbert spaces as the sparsity-inducing penalty in GroupSpAM. Moreover, we derive a novel thresholding condition for identifying the functional sparsity at the group level, and propose an efficient block coordinate descent algorithm for constructing the estimate. We demonstrate by simulation that GroupSpAM substantially outperforms the competing methods in terms of support recovery and prediction accuracy in additive models, and also conduct a comparative experiment on a real breast cancer dataset.

  13. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  14. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  15. Fused Lasso Additive Model

    PubMed Central

    Petersen, Ashley; Witten, Daniela; Simon, Noah

    2016-01-01

    We consider the problem of predicting an outcome variable using p covariates that are measured on n independent observations, in a setting in which additive, flexible, and interpretable fits are desired. We propose the fused lasso additive model (FLAM), in which each additive function is estimated to be piecewise constant with a small number of adaptively-chosen knots. FLAM is the solution to a convex optimization problem, for which a simple algorithm with guaranteed convergence to a global optimum is provided. FLAM is shown to be consistent in high dimensions, and an unbiased estimator of its degrees of freedom is proposed. We evaluate the performance of FLAM in a simulation study and on two data sets. Supplemental materials are available online, and the R package flam is available on CRAN. PMID:28239246

  16. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  17. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  18. Additives in plastics.

    PubMed

    Deanin, R D

    1975-06-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products.

  19. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  20. More Than Additional Space...

    ERIC Educational Resources Information Center

    CEFP Journal, 1973

    1973-01-01

    A much needed addition to the Jamestown Elementary School turned out to be more than an expansion of walls for more space. A new educational program, a limited budget, and a short time line were tackled on a team approach basis and were successfully resolved. (Author)

  1. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  2. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  3. Informative prior distributions for ELISA analyses.

    PubMed

    Klauenberg, Katy; Walzel, Monika; Ebert, Bernd; Elster, Clemens

    2015-07-01

    Immunoassays are capable of measuring very small concentrations of substances in solutions and have an immense range of application. Enzyme-linked immunosorbent assay (ELISA) tests in particular can detect the presence of an infection, of drugs, or hormones (as in the home pregnancy test). Inference of an unknown concentration via ELISA usually involves a non-linear heteroscedastic regression and subsequent prediction, which can be carried out in a Bayesian framework. For such a Bayesian inference, we are developing informative prior distributions based on extensive historical ELISA tests as well as theoretical considerations. One consideration regards the quality of the immunoassay leading to two practical requirements for the applicability of the priors. Simulations show that the additional prior information can lead to inferences which are robust to reasonable perturbations of the model and changes in the design of the data. On real data, the applicability is demonstrated across different laboratories, for different analytes and laboratory equipment as well as for previous and current ELISAs with sigmoid regression function. Consistency checks on real data (similar to cross-validation) underpin the adequacy of the suggested priors. Altogether, the new priors may improve concentration estimation for ELISAs that fulfill certain design conditions, by extending the range of the analyses, decreasing the uncertainty, or giving more robust estimates. Future use of these priors is straightforward because explicit, closed-form expressions are provided. This work encourages development and application of informative, yet general, prior distributions for other types of immunoassays.

  4. CFD analyses of coolant channel flowfields

    NASA Technical Reports Server (NTRS)

    Yagley, Jennifer A.; Feng, Jinzhang; Merkle, Charles L.

    1993-01-01

    The flowfield characteristics in rocket engine coolant channels are analyzed by means of a numerical model. The channels are characterized by large length to diameter ratios, high Reynolds numbers, and asymmetrical heating. At representative flow conditions, the channel length is approximately twice the hydraulic entrance length so that fully developed conditions would be reached for a constant property fluid. For the supercritical hydrogen that is used as the coolant, the strong property variations create significant secondary flows in the cross-plane which have a major influence on the flow and the resulting heat transfer. Comparison of constant and variable property solutions show substantial differences. In addition, the property variations prevent fully developed flow. The density variation accelerates the fluid in the channels increasing the pressure drop without an accompanying increase in heat flux. Analyses of the inlet configuration suggest that side entry from a manifold can affect the development of the velocity profile because of vortices generated as the flow enters the channel. Current work is focused on studying the effects of channel bifurcation on the flow field and the heat transfer characteristics.

  5. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online.

  6. Additive manufacturing of hybrid circuits

    SciTech Connect

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  7. Perturbation analyses of intermolecular interactions

    NASA Astrophysics Data System (ADS)

    Koyama, Yohei M.; Kobayashi, Tetsuya J.; Ueda, Hiroki R.

    2011-08-01

    Conformational fluctuations of a protein molecule are important to its function, and it is known that environmental molecules, such as water molecules, ions, and ligand molecules, significantly affect the function by changing the conformational fluctuations. However, it is difficult to systematically understand the role of environmental molecules because intermolecular interactions related to the conformational fluctuations are complicated. To identify important intermolecular interactions with regard to the conformational fluctuations, we develop herein (i) distance-independent and (ii) distance-dependent perturbation analyses of the intermolecular interactions. We show that these perturbation analyses can be realized by performing (i) a principal component analysis using conditional expectations of truncated and shifted intermolecular potential energy terms and (ii) a functional principal component analysis using products of intermolecular forces and conditional cumulative densities. We refer to these analyses as intermolecular perturbation analysis (IPA) and distance-dependent intermolecular perturbation analysis (DIPA), respectively. For comparison of the IPA and the DIPA, we apply them to the alanine dipeptide isomerization in explicit water. Although the first IPA principal components discriminate two states (the α state and PPII (polyproline II) + β states) for larger cutoff length, the separation between the PPII state and the β state is unclear in the second IPA principal components. On the other hand, in the large cutoff value, DIPA eigenvalues converge faster than that for IPA and the top two DIPA principal components clearly identify the three states. By using the DIPA biplot, the contributions of the dipeptide-water interactions to each state are analyzed systematically. Since the DIPA improves the state identification and the convergence rate with retaining distance information, we conclude that the DIPA is a more practical method compared with the

  8. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  9. The earliest published electrocardiogram showing ventricular preexcitation.

    PubMed

    Von Knorre, Georg H

    2005-03-01

    When in 1930, Wolff, Parkinson, and White published what is today known as the WPW, or preexcitation syndrome, they, and subsequently others, found few comparable cases in the preceding literature. Among these the report of Cohn and Fraser, published in 1913, was the earliest. However, another even earlier documentation in a 1909 article by Hoffmann escaped notice till now. The ECG of a patient with paroxysmal tachycardia reveals a short PR interval and a delta-wave-induced widening of the QRS complex, even though the reproduced tachycardia was not preexcitation related. The interpretation of this poorly reproduced ECG can be confirmed by another and more detailed description of the patient in an electrocardiography textbook published in 1914 by the same author. Thus, the earliest publication of an ECG showing ventricular preexcitation now can be dated back to 1909. Moreover, the Hoffmann monograph contains two additional examples of the WPW syndrome not noticed until now. All three cases published by Hoffmann had their first ECG recordings in 1912 or earlier.

  10. Temperature Data Shows Warming in 2001

    NASA Technical Reports Server (NTRS)

    2002-01-01

    TThe figure above depicts how much air temperatures near the Earth's surface changed relative to the global mean temperature from 1951 to 1980. NASA researchers used maps of urban areas derived from city lights data to account for the 'heat island' effect of cities. The red and orange colors show that temperatures are warmer in most regions of the world when compared to the 1951 to 1980 'normal' temperatures. Warming around the world has been widespread, but it is not present everywhere. The largest warming is in Northern Canada, Alaska and Siberia, as indicated by the deeper red colors. The lower 48 United States have become warmer recently, but only enough to make the temperatures comparable to what they were in the 1930s. The scale on the bottom of these temperature anomaly images represent degrees in Celsius. The negative numbers represent cooling and the positive numbers depict warming. Overall, the air temperature near the Earth's surface has warmed by 1oF (0.6oC) globally, on average, over the last century. For more information and additional images, read Satellites Shed Light on a Warmer World. Image courtesy Goddard Institute for Space Studies (GISS).

  11. Ancient bacteria show evidence of DNA repair

    PubMed Central

    Johnson, Sarah Stewart; Hebsgaard, Martin B.; Christensen, Torben R.; Mastepanov, Mikhail; Nielsen, Rasmus; Munch, Kasper; Brand, Tina; Gilbert, M. Thomas P.; Zuber, Maria T.; Bunce, Michael; Rønn, Regin; Gilichinsky, David; Froese, Duane; Willerslev, Eske

    2007-01-01

    Recent claims of cultivable ancient bacteria within sealed environments highlight our limited understanding of the mechanisms behind long-term cell survival. It remains unclear how dormancy, a favored explanation for extended cellular persistence, can cope with spontaneous genomic decay over geological timescales. There has been no direct evidence in ancient microbes for the most likely mechanism, active DNA repair, or for the metabolic activity necessary to sustain it. In this paper, we couple PCR and enzymatic treatment of DNA with direct respiration measurements to investigate long-term survival of bacteria sealed in frozen conditions for up to one million years. Our results show evidence of bacterial survival in samples up to half a million years in age, making this the oldest independently authenticated DNA to date obtained from viable cells. Additionally, we find strong evidence that this long-term survival is closely tied to cellular metabolic activity and DNA repair that over time proves to be superior to dormancy as a mechanism in sustaining bacteria viability. PMID:17728401

  12. Additive composition, for gasoline

    SciTech Connect

    Vataru, M.

    1989-01-10

    An admixture is described that comprises Diesel fuel and an additive composition added thereto which is between about 0.05 to about 2.0 percent by weight of the fuel, the composition comprising: (a) between about 0.05 and 25% relative weight parts of an organic peroxide, and (b) between about 0.1 and 25% relative weight parts of detergent selected from the component group that consists of: (i) fatty amines; (ii) ethoxylated and propoxylated derivatives of fatty amines; (iii) fatty diamines; (iv) fatty imidazlines; (v) polymeric amines and derivatives thereof; (vi) combination of one or more of the (i) through (v) components with carboxylic acid or acids having from three to forth carbon atoms, (c) from about 99.0 to about 50% by weight of a hydrocarbon solvent.

  13. Teardrop bladder: additional considerations

    SciTech Connect

    Wechsler, R.J.; Brennan, R.E.

    1982-07-01

    Nine cases of teardrop bladder (TDB) seen at excretory urography are presented. In some of these patients, the iliopsoas muscles were at the upper limit of normal in size, and additional evaluation of the perivesical structures with computed tomography (CT) was necessary. CT demonstrated only hypertrophied muscles with or without perivesical fat. The psoas muscles and pelvic width were measured in 8 patients and compared with the measurements of a control group of males without TDB. Patients with TDB had large iliopsoas muscles and narrow pelves compared with the control group. The psoas muscle width/pelvic width ratio was significantly greater (p < 0.0005) in patients with TDB than in the control group, with values of 1.04 + 0.05 and 0.82 + 0.09, respectively. It is concluded that TDB is not an uncommon normal variant in black males. Both iliopsoas muscle hypertrophy and a narrow pelvis are factors that predispose a patient to TDB.

  14. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  15. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  16. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  17. Prismatic analyser concept for neutron spectrometers

    SciTech Connect

    Birk, Jonas O.; Jacobsen, Johan; Hansen, Rasmus L.; Lefmann, Kim; Markó, Márton; Niedermayer, Christof; Freeman, Paul G.; Christensen, Niels B.; Månsson, Martin; Rønnow, Henrik M.

    2014-11-15

    Developments in modern neutron spectroscopy have led to typical sample sizes decreasing from few cm to several mm in diameter samples. We demonstrate how small samples together with the right choice of analyser and detector components makes distance collimation an important concept in crystal analyser spectrometers. We further show that this opens new possibilities where neutrons with different energies are reflected by the same analyser but counted in different detectors, thus improving both energy resolution and total count rate compared to conventional spectrometers. The technique can readily be combined with advanced focussing geometries and with multiplexing instrument designs. We present a combination of simulations and data showing three different energies simultaneously reflected from one analyser. Experiments were performed on a cold triple axis instrument and on a prototype inverse geometry Time-of-flight spectrometer installed at PSI, Switzerland, and shows excellent agreement with the predictions. Typical improvements will be 2.0 times finer resolution and a factor of 1.9 in flux gain compared to a focussing Rowland geometry, or of 3.3 times finer resolution and a factor of 2.4 in flux gain compared to a single flat analyser slab.

  18. Data from the Television Game Show "Friend or Foe?"

    ERIC Educational Resources Information Center

    Kalist, David E.

    2004-01-01

    The data discussed in this paper are from the television game show "Friend or Foe", and can be used to examine whether age, gender, race, and the amount of prize money affect contestants' strategies. The data are suitable for a variety of statistical analyses, such as descriptive statistics, testing for differences in means or proportions, and…

  19. Publication bias in dermatology systematic reviews and meta-analyses.

    PubMed

    Atakpo, Paul; Vassar, Matt

    2016-05-01

    Systematic reviews and meta-analyses in dermatology provide high-level evidence for clinicians and policy makers that influence clinical decision making and treatment guidelines. One methodological problem with systematic reviews is the under representation of unpublished studies. This problem is due in part to publication bias. Omission of statistically non-significant data from meta-analyses may result in overestimation of treatment effect sizes which may lead to clinical consequences. Our goal was to assess whether systematic reviewers in dermatology evaluate and report publication bias. Further, we wanted to conduct our own evaluation of publication bias on meta-analyses that failed to do so. Our study considered systematic reviews and meta-analyses from ten dermatology journals from 2006 to 2016. A PubMed search was conducted, and all full-text articles that met our inclusion criteria were retrieved and coded by the primary author. 293 articles were included in our analysis. Additionally, we formally evaluated publication bias in meta-analyses that failed to do so using trim and fill and cumulative meta-analysis by precision methods. Publication bias was mentioned in 107 articles (36.5%) and was formally evaluated in 64 articles (21.8%). Visual inspection of a funnel plot was the most common method of evaluating publication bias. Publication bias was present in 45 articles (15.3%), not present in 57 articles (19.5%) and not determined in 191 articles (65.2%). Using the trim and fill method, 7 meta-analyses (33.33%) showed evidence of publication bias. Although the trim and fill method only found evidence of publication bias in 7 meta-analyses, the cumulative meta-analysis by precision method found evidence of publication bias in 15 meta-analyses (71.4%). Many of the reviews in our study did not mention or evaluate publication bias. Further, of the 42 articles that stated following PRISMA reporting guidelines, 19 (45.2%) evaluated for publication bias. In

  20. Comparison between Inbreeding Analyses Methodologies.

    PubMed

    Esparza, Mireia; Martínez-Abadías, Neus; Sjøvold, Torstein; González-José, Rolando; Hernández, Miquel

    2015-12-01

    Surnames are widely used in inbreeding analysis, but the validity of results has often been questioned due to the failure to comply with the prerequisites of the method. Here we analyze inbreeding in Hallstatt (Austria) between the 17th and the 19th centuries both using genealogies and surnames. The high and significant correlation of the results obtained by both methods demonstrates the validity of the use of surnames in this kind of studies. On the other hand, the inbreeding values obtained (0.24 x 10⁻³ in the genealogies analysis and 2.66 x 10⁻³ in the surnames analysis) are lower than those observed in Europe for this period and for this kind of population, demonstrating the falseness of the apparent isolation of Hallstatt's population. The temporal trend of inbreeding in both analyses does not follow the European general pattern, but shows a maximum in 1850 with a later decrease along the second half of the 19th century. This is probably due to the high migration rate that is implied by the construction of transport infrastructures around the 1870's.

  1. EEO Implications of Job Analyses.

    ERIC Educational Resources Information Center

    Lacy, D. Patrick, Jr.

    1979-01-01

    Discusses job analyses as they relate to the requirements of Title VII of the Civil Rights Act of 1964, the Equal Pay Act of 1963, and the Rehabilitation Act of 1973. Argues that job analyses can establish the job-relatedness of entrance requirements and aid in defenses against charges of discrimination. Journal availability: see EA 511 615.

  2. Additive lattice kirigami.

    PubMed

    Castle, Toen; Sussman, Daniel M; Tanis, Michael; Kamien, Randall D

    2016-09-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  3. Ceramics with Different Additives

    NASA Astrophysics Data System (ADS)

    Wang, Juanjuan; Feng, Lajun; Lei, Ali; Zhao, Kang; Yan, Aijun

    2014-09-01

    Li2CO3, MgCO3, BaCO3, and Bi2O3 dopants were introduced into CaCu3Ti4O12 (CCTO) ceramics in order to improve the dielectric properties. The CCTO ceramics were prepared by conventional solid-state reaction method. The phase structure, microstructure, and dielectric behavior were carefully investigated. The pure structure without any impurity phases can be confirmed by the x-ray diffraction patterns. Scanning Electron Microscopy (SEM) analysis illuminated that the grains of Ca0.90Li0.20Cu3Ti4O12 ceramics were greater than that of pure CCTO. It was important for the properties of the CCTO ceramics to study the additives in complex impedance spectroscopy. It was found that the Ca0.90Li0.20Cu3Ti4O12 ceramics had the higher permittivity (>45000), the lower dielectric loss (<0.025) than those of CCTO at 1 kHz at room temperature and good temperature stability from -30 to 75 °C.

  4. Additive lattice kirigami

    PubMed Central

    Castle, Toen; Sussman, Daniel M.; Tanis, Michael; Kamien, Randall D.

    2016-01-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes. PMID:27679822

  5. Moon Phase & Libration 2013: Additional Graphics

    NASA Video Gallery

    This visualization shows the phase and libration of the Moon throughout the year 2013, at hourly intervals. Each frame represents one hour. In addition, this version of the visualization shows addi...

  6. Amino acid analyses of Apollo 14 samples.

    NASA Technical Reports Server (NTRS)

    Gehrke, C. W.; Zumwalt, R. W.; Kuo, K.; Aue, W. A.; Stalling, D. L.; Kvenvolden, K. A.; Ponnamperuma, C.

    1972-01-01

    Detection limits were between 300 pg and 1 ng for different amino acids, in an analysis by gas-liquid chromatography of water extracts from Apollo 14 lunar fines in which amino acids were converted to their N-trifluoro-acetyl-n-butyl esters. Initial analyses of water and HCl extracts of sample 14240 and 14298 samples showed no amino acids above background levels.

  7. Written Case Analyses and Critical Reflection.

    ERIC Educational Resources Information Center

    Harrington, Helen L.; And Others

    1996-01-01

    The study investigated the use of case-based pedagogy to develop critical reflection in prospective teachers. Analysis of students written analyses of dilemma-based cases found patterns showing evidence of students open-mindedness, sense of professional responsibility, and wholeheartedness in approach to teaching. (DB)

  8. Computed tomography characterisation of additive manufacturing materials.

    PubMed

    Bibb, Richard; Thompson, Darren; Winder, John

    2011-06-01

    Additive manufacturing, covering processes frequently referred to as rapid prototyping and rapid manufacturing, provides new opportunities in the manufacture of highly complex and custom-fitting medical devices and products. Whilst many medical applications of AM have been explored and physical properties of the resulting parts have been studied, the characterisation of AM materials in computed tomography has not been explored. The aim of this study was to determine the CT number of commonly used AM materials. There are many potential applications of the information resulting from this study in the design and manufacture of wearable medical devices, implants, prostheses and medical imaging test phantoms. A selection of 19 AM material samples were CT scanned and the resultant images analysed to ascertain the materials' CT number and appearance in the images. It was found that some AM materials have CT numbers very similar to human tissues, FDM, SLA and SLS produce samples that appear uniform on CT images and that 3D printed materials show a variation in internal structure.

  9. 3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Historic American Buildings Survey February, 1953 LOOKING EAST, SHOWING A GROUP OF HAGERSTOWN HIGH SCHOOL STUDENTS IN THE PROCESS OF UNCOVERING THE ADDITIONAL FOUNDATION - Jonathan Hager House (Foundation), Hagerstown, Washington County, MD

  10. Antenna cab interior showing waveguide from external parabolic antenna (later ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Antenna cab interior showing waveguide from external parabolic antenna (later addition), looking north. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA

  11. 5. EXTERIOR OF NORTH END OF BUILDING 105 SHOWING 1946 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF NORTH END OF BUILDING 105 SHOWING 1946 BEDROOM ADDITION. BUILDING 108 IS VISIBLE AT EXTREME PHOTO LEFT. VIEW TO SOUTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  12. 33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. PLAN OF DEER ISLAND PUMPING STATION SHOWING EXISTING PUMPING PLAN AND LOCATION OF PROPOSED ADDITIONS, METROPOLITAN WATER AND SEWERAGE BOARD, METROPOLITAN SEWERAGE WORKS, JULY 1908. Aperture card 6417. - Deer Island Pumping Station, Boston, Suffolk County, MA

  13. 3. MAIN ELEVATION, DETAIL SHOWING HEWN LOGS WITH HALFDOVETAIL JOINTS; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. MAIN ELEVATION, DETAIL SHOWING HEWN LOGS WITH HALF-DOVETAIL JOINTS; LATHE AND PLASTER ADDITION; AND CLAPBOARD SIDING - Shinn-Curtis Log Cabin, 23 Washington Street (moved from Rancocas Boulevard), Mount Holly, Burlington County, NJ

  14. Topographic ERP analyses: a step-by-step tutorial review.

    PubMed

    Murray, Micah M; Brunet, Denis; Michel, Christoph M

    2008-06-01

    In this tutorial review, we detail both the rationale for as well as the implementation of a set of analyses of surface-recorded event-related potentials (ERPs) that uses the reference-free spatial (i.e. topographic) information available from high-density electrode montages to render statistical information concerning modulations in response strength, latency, and topography both between and within experimental conditions. In these and other ways these topographic analysis methods allow the experimenter to glean additional information and neurophysiologic interpretability beyond what is available from canonical waveform analyses. In this tutorial we present the example of somatosensory evoked potentials (SEPs) in response to stimulation of each hand to illustrate these points. For each step of these analyses, we provide the reader with both a conceptual and mathematical description of how the analysis is carried out, what it yields, and how to interpret its statistical outcome. We show that these topographic analysis methods are intuitive and easy-to-use approaches that can remove much of the guesswork often confronting ERP researchers and also assist in identifying the information contained within high-density ERP datasets.

  15. A group additivity algorithm for polychlorinated dibenzofurans derived from selected DFT analyses.

    PubMed

    Thompson, Dennis; Ewan, Bruce C R

    2007-06-14

    The difficulty in measuring the heats of combustion of polychlorinated dibenzofurans (PCDFs) has resulted in a shortage of data on their heats of formation, required for the purpose of developing an understanding of the role of thermodynamics and kinetics in their production via industrial processes. B3LYP density functional theory calculations have been carried out on a number of PCDFs using 6-31G(d) and 6-311+G(3df,p) basis sets to estimate their heats of formation based on the known experimental values for dibenzofuran, benzene and chlorobenzene. By examining the interactions among chlorine substituents, it is shown that energy contributions arising from successive chlorination can be interpreted in a predictable way, based on a small number of key energy parameters associated with ring position and chlorine atom repulsions. These parameters have been presented as the basis for a simplified prediction algorithm, which can be used to reproduce the predicted DFT heat of formation to within a few kJ/mol, avoiding the need to carry out extensive DFT calculations on the possible 135 isomers of the dibenzofuran group.

  16. Analyses of Transistor Punchthrough Failures

    NASA Technical Reports Server (NTRS)

    Nicolas, David P.

    1999-01-01

    The failure of two transistors in the Altitude Switch Assembly for the Solid Rocket Booster followed by two additional failures a year later presented a challenge to failure analysts. These devices had successfully worked for many years on numerous missions. There was no history of failures with this type of device. Extensive checks of the test procedures gave no indication for a source of the cause. The devices were manufactured more than twenty years ago and failure information on this lot date code was not readily available. External visual exam, radiography, PEID, and leak testing were performed with nominal results Electrical testing indicated nearly identical base-emitter and base-collector characteristics (both forward and reverse) with a low resistance short emitter to collector. These characteristics are indicative of a classic failure mechanism called punchthrough. In failure analysis punchthrough refers to an condition where a relatively low voltage pulse causes the device to conduct very hard producing localized areas of thermal runaway or "hot spots". At one or more of these hot spots, the excessive currents melt the silicon. Heavily doped emitter material diffuses through the base region to the collector forming a diffusion pipe shorting the emitter to base to collector. Upon cooling, an alloy junction forms between the pipe and the base region. Generally, the hot spot (punch-through site) is under the bond and no surface artifact is visible. The devices were delidded and the internal structures were examined microscopically. The gold emitter lead was melted on one device, but others had anomalies in the metallization around the in-tact emitter bonds. The SEM examination confirmed some anomalies to be cosmetic defects while other anomalies were artifacts of the punchthrough site. Subsequent to these analyses, the contractor determined that some irregular testing procedures occurred at the time of the failures heretofore unreported. These testing

  17. Genetic analyses of captive Alala (Corvus hawaiiensis) using AFLP analyses

    USGS Publications Warehouse

    Jarvi, Susan I.; Bianchi, Kiara R.

    2006-01-01

    affected by the mutation rate at microsatellite loci, thus introducing a bias. Also, the number of loci that can be studied is frequently limited to fewer than 10. This theoretically represents a maximum of one marker for each of 10 chromosomes. Dominant markers like AFLP allow a larger fraction of the genome to be screened. Large numbers of loci can be screened by AFLP to resolve very small individual differences that can be used for identification of individuals, estimates of pairwise relatedness and, in some cases, for parentage analyses. Since AFLP is a dominant marker (can not distinguish between +/+ homozygote versus +/- heterozygote), it has limitations for parentage analyses. Only when both parents are homozygous for the absence of alleles (-/-) and offspring show a presence (+/+ or +/-) can the parents be excluded. In this case, microsatellites become preferable as they have the potential to exclude individual parents when the other parent is unknown. Another limitation of AFLP is that the loci are generally less polymorphic (only two alleles/locus) than microsatellite loci (often >10 alleles/locus). While generally fewer than 10 highly polymorphic microsatellite loci are enough to exclude and assign parentage, it might require up to 100 or more AFLP loci. While there are pros and cons to different methodologies, the total number of loci evaluated by AFLP generally offsets the limitations imposed due to the dominant nature of this approach and end results between methods are generally comparable. Overall objectives of this study were to evaluate the level of genetic diversity in the captive population of Alala, to compare genetic data with currently available pedigree information, and to determine the extent of relatedness of mating pairs and among founding individuals.

  18. Analysing the ventricular fibrillation waveform.

    PubMed

    Reed, Matthew J; Clegg, Gareth R; Robertson, Colin E

    2003-04-01

    The surface electrocardiogram associated with ventricular fibrillation has been of interest to researchers for some time. Over the last few decades, techniques have been developed to analyse this signal in an attempt to obtain more information about the state of the myocardium and the chances of successful defibrillation. This review looks at the implications of analysing the VF waveform and discusses the various techniques that have been used, including fast Fourier transform analysis, wavelet transform analysis and mathematical techniques such as chaos theory.

  19. Additive manufacturing of hybrid circuits

    DOE PAGES

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; ...

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  20. High Flow Addition Curing Polyimides

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Vannucci, Raymond D.; Ansari, Irfan; Cerny, Lawrence L.; Scheiman, Daniel A.

    1994-01-01

    A new series of high flow PMR-type addition curing polyimides was developed, which employed the substitution of 2,2'-bis (trifluoromethyl) -4,4'-diaminobiphenyl (BTDB) for p-phenylenediamine (p -PDA) in a PMR-IL formulation. These thermoset polyimides, designated as 12F resins, were prepared from BTDB and the dimethyl ester of 4,4'- (hexafluo- roisopropylidene) -diphthalic acid (HFDE) with either nadic ester (NE) or p-aminostyrene (PAS) as the endcaps for addition curing. The 12F prepolymers displayed lower melting temperatures in DSC analysis, and higher melt flow in rheological studies than the cor- responding PMR-11 polyimides. Long-term isothermal aging studies showed that BTDB- based 12F resins exhibited comparable thermo-oxidative stability to P-PDA based PMR-11 polyimides. The noncoplanar 2- and 2'-disubstituted biphenyldiamine (BTDB) not only lowered the melt viscosities of 12F prepolymers, but also retained reasonable thermal sta- bility of the cured resins. The 12F polyimide resin with p-aminostyrene endcaps showed the best promise for long-term, high-temperature application at 343 C (650 F).

  1. Database-Driven Analyses of Astronomical Spectra

    NASA Astrophysics Data System (ADS)

    Cami, Jan

    2012-03-01

    species to the fullerene species C60 and C70 [4]. Given the large number and variety of molecules detected in space, molecular infrared spectroscopy can be used to study pretty much any astrophysical environment that is not too energetic to dissociate the molecules. At the lowest energies, it is interesting to note that molecules such as CN have been used to measure the temperature of the Cosmic Microwave Background (see e.g., Ref. 15). The great diagnostic potential of infrared molecular spectroscopy comes at a price though. Extracting the physical parameters from the observations requires expertise in knowing how various physical processes and instrumental characteristics play together in producing the observed spectra. In addition to the astronomical aspects, this often includes interpreting and understanding the limitations of laboratory data and quantum-chemical calculations; the study of the interaction of matter with radiation at microscopic scales (called radiative transfer, akin to ray tracing) and the effects of observing (e.g., smoothing and resampling) on the resulting spectra and possible instrumental effects (e.g., fringes). All this is not trivial. To make matters worse, observational spectra often contain many components, and might include spectral contributions stemming from very different physical conditions. Fully analyzing such observations is thus a time-consuming task that requires mastery of several techniques. And with ever-increasing rates of observational data acquisition, it seems clear that in the near future, some form of automation is required to handle the data stream. It is thus appealing to consider what part of such analyses could be done without too much human intervention. Two different aspects can be separated: the first step involves simply identifying the molecular species present in the observations. Once the molecular inventory is known, we can try to extract the physical parameters from the observed spectral properties. For both

  2. Effect of glutathione addition in sparkling wine.

    PubMed

    Webber, Vanessa; Dutra, Sandra Valduga; Spinelli, Fernanda Rodrigues; Marcon, Ângela Rossi; Carnieli, Gilberto João; Vanderlinde, Regina

    2014-09-15

    This study aims to evaluate the effect of the addition of glutathione (GSH) on secondary aromas and on the phenolic compounds of sparkling wine elaborated by traditional method. It was added 10 and 20 mg L(-1) of GSH to must and to base wine. The determination of aroma compounds was performed by gas chromatography. Phenolic compounds and glutathione content were analyzed by high performance liquid chromatography. Sparkling wines with addition of GSH to must showed lower levels of total phenolic compounds and hydroxycinnamic acids. Furthermore, the sparkling wine with addition of GSH to must showed higher levels of 2-phenylethanol, 3-methyl-1-butanol and diethyl succinate, and lower concentrations of ethyl decanoate, octanoic and decanoic acids. The GSH addition to the must show a greater influence on sparkling wine than to base wine, however GSH addition to base wine seems retain higher SO2 free levels. The concentration of GSH added showed no significant difference.

  3. Nonindependence and sensitivity analyses in ecological and evolutionary meta-analyses.

    PubMed

    Noble, Daniel W A; Lagisz, Malgorzata; O'dea, Rose E; Nakagawa, Shinichi

    2017-01-30

    Meta-analysis is an important tool for synthesizing research on a variety of topics in ecology and evolution, including molecular ecology, but can be susceptible to nonindependence. Nonindependence can affect two major interrelated components of a meta-analysis: (i) the calculation of effect size statistics and (ii) the estimation of overall meta-analytic estimates and their uncertainty. While some solutions to nonindependence exist at the statistical analysis stages, there is little advice on what to do when complex analyses are not possible, or when studies with nonindependent experimental designs exist in the data. Here we argue that exploring the effects of procedural decisions in a meta-analysis (e.g. inclusion of different quality data, choice of effect size) and statistical assumptions (e.g. assuming no phylogenetic covariance) using sensitivity analyses are extremely important in assessing the impact of nonindependence. Sensitivity analyses can provide greater confidence in results and highlight important limitations of empirical work (e.g. impact of study design on overall effects). Despite their importance, sensitivity analyses are seldom applied to problems of nonindependence. To encourage better practice for dealing with nonindependence in meta-analytic studies, we present accessible examples demonstrating the impact that ignoring nonindependence can have on meta-analytic estimates. We also provide pragmatic solutions for dealing with nonindependent study designs, and for analysing dependent effect sizes. Additionally, we offer reporting guidelines that will facilitate disclosure of the sources of nonindependence in meta-analyses, leading to greater transparency and more robust conclusions.

  4. Additive-driven assembly of block copolymers

    NASA Astrophysics Data System (ADS)

    Lin, Ying; Daga, Vikram; Anderson, Eric; Watkins, James

    2011-03-01

    One challenge to the formation of well ordered hybrid materials is the incorporation of nanoscale additives including metal, semiconductor and dielectric nanoparticles at high loadings while maintaining strong segregation. Here we describe the molecular and functional design of small molecule and nanoparticle additives that enhance phase segregation in their block copolymer host and enable high additive loadings. Our approach includes the use of hydrogen bond interactions between the functional groups on the additive or particle that serve as hydrogen bond donors and one segment of the block copolymer containing hydrogen bond acceptors. Further, the additives show strong selectively towards the targeted domains, leading to enhancements in contrast between properties of the phases. In addition to structural changes, we explore how large changes in the thermal and mechanical properties occur upon incorporation of the additives. Generalization of this additive-induced ordering strategy to various block copolymers will be discussed.

  5. Genome-wide analyses for personality traits identify six genomic loci and show correlations with psychiatric disorders

    PubMed Central

    Lo, Min-Tzu; Hinds, David A.; Tung, Joyce Y.; Franz, Carol; Fan, Chun-Chieh; Wang, Yunpeng; Smeland, Olav B.; Schork, Andrew; Holland, Dominic; Kauppi, Karolina; Sanyal, Nilotpal; Escott-Price, Valentina; Smith, Daniel J.; O'Donovan, Michael; Stefansson, Hreinn; Bjornsdottir, Gyda; Thorgeirsson, Thorgeir E.; Stefansson, Kari; McEvoy, Linda K.; Dale, Anders M.; Andreassen, Ole A.; Chen, Chi-Hua

    2017-01-01

    Summary Personality is influenced by genetic and environmental factors1, and associated with mental health. However, the underlying genetic determinants are largely unknown. We identified six genetic loci, including five novel loci2,3, significantly associated with personality traits in a meta-analysis of genome-wide association studies (N=123,132–260,861). Of these genome-wide significant loci, extraversion was associated with variants in WSCD2 and near PCDH15, and neuroticism with variants on chromosome 8p23.1 and in L3MBTL2. We performed a principal component analysis to extract major dimensions underlying genetic variations among five personality traits and six psychiatric disorders (N=5,422–18,759). The first genetic dimension separated personality traits and psychiatric disorders, except that neuroticism and openness to experience were clustered with the disorders. High genetic correlations were found between extraversion and attention-deficit/hyperactivity disorder (ADHD), and between openness and schizophrenia/bipolar disorder. The second genetic dimension was closely aligned with extraversion-introversion and grouped neuroticism with internalizing psychopathology (e.g., depression/anxiety). PMID:27918536

  6. Texture analyses show synergetic effects of biomechanical and biochemical stimulation on mesenchymal stem cell differentiation into early phase osteoblasts.

    PubMed

    Park, So Hee; Shin, Ji Won; Kang, Yun Gyeong; Hyun, Jin-Sook; Oh, Min Jae; Shin, Jung-Woog

    2014-02-01

    We investigated the structural complexity and texture of the cytoskeleton and nucleus in human mesenchymal stem cells during early phase differentiation into osteoblasts according to the differentiation-induction method: mechanical and/or chemical stimuli. For this, fractal dimension and a number of parameters utilizing the gray-level co-occurrence matrix (GLCM) were calculated based on single-cell images after confirmation of differentiation by immunofluorescence staining. The F-actin and nuclear fractal dimensions were greater in both stimulus groups compared with the control group. The GLCM values for energy and homogeneity were lower in fibers of the F-actin cytoskeleton, indicating a dispersed F-actin arrangement during differentiation. In the nuclei of both stimulus groups, higher values for energy and homogeneity were calculated, indicating that the chromatin arrangement was chaotic during the early phase of differentiation. It was shown and confirmed that combined stimulation with mechanical and chemical factors accelerated differentiation, even in the early phase. Fractal dimension analysis and GLCM methods have the potential to provide a framework for further investigation of stem cell differentiation.

  7. Man’s Best Friend Becomes Biology’s Best in Show: Genome Analyses in the Domestic Dog*

    PubMed Central

    Parker, Heidi G.; Shearin, Abigail L.; Ostrander, Elaine A.

    2012-01-01

    In the last five years, canine genetics has gone from map construction to complex disease deconstruction. The availability of a draft canine genome sequence, dense marker chips, and an understanding of the genome architecture has changed the types of studies canine geneticists can undertake. There is now a clear recognition that the dog system offers the opportunity to understand the genetics of both simple and complex traits, including those associated with morphology, disease susceptibility, and behavior. In this review, we summarize recent findings regarding canine domestication and review new information on the organization of the canine genome. We discuss studies aimed at finding genes controlling morphological phenotypes and provide examples of the way such paradigms may be applied to studies of behavior. We also discuss the many ways in which the dog has illuminated our understanding of human disease and conclude with a discussion on where the field is likely headed in the next five years. PMID:21047261

  8. Tract-Specific Analyses of Diffusion Tensor Imaging Show Widespread White Matter Compromise in Autism Spectrum Disorder

    ERIC Educational Resources Information Center

    Shukla, Dinesh K.; Keehn, Brandon; Muller, Ralph-Axel

    2011-01-01

    Background: Previous diffusion tensor imaging (DTI) studies have shown white matter compromise in children and adults with autism spectrum disorder (ASD), which may relate to reduced connectivity and impaired function of distributed networks. However, tract-specific evidence remains limited in ASD. We applied tract-based spatial statistics (TBSS)…

  9. EPOXI Trajectory and Maneuver Analyses

    NASA Technical Reports Server (NTRS)

    Chung, Min-Kun J.; Bhaskaran, Shyamkumar; Chesley, Steven R.; Halsell, C. Allen; Helfrich, Clifford E.; Jefferson, David C.; McElrath, Timothy P.; Rush, Brian P.; Wang, Tseng-Chan M.; Yen, Chen-wan L.

    2011-01-01

    The EPOXI mission is a NASA Discovery Mission of Opportunity combining two separate investigations: Extrasolar Planet Observation and Characterization (EPOCh) and Deep Impact eXtended Investigation (DIXI). Both investigations reused the DI instruments and spacecraft that successfully flew by the comet Tempel-1 (4 July 2005). For EPOCh, the goal was to find exoplanets with the high resolution imager, while for DIXI it was to fly by the comet Hartley 2 (4 Nov 2010). This paper documents the navigation experience of the earlier ma-neuver analyses critical for the EPOXI mission including statistical ?V analyses and other useful analyses in designing maneuvers. It also recounts the trajectory design leading up to the final reference trajectory to Hartley 2.

  10. Ares I-X Separation and Reentry Trajectory Analyses

    NASA Technical Reports Server (NTRS)

    Tartabini, Paul V.; Starr, Brett R.

    2011-01-01

    The Ares I-X Flight Test Vehicle was launched on October 28, 2009 and was the first and only test flight of NASA s two-stage Ares I launch vehicle design. The launch was successful and the flight test met all of its primary and secondary objectives. This paper discusses the stage separation and reentry trajectory analysis that was performed in support of the Ares I-X test flight. Pre-flight analyses were conducted to assess the risk of stage recontact during separation, to evaluate the first stage flight dynamics during reentry, and to define the range safety impact ellipses of both stages. The results of these pre-flight analyses were compared with available flight data. On-board video taken during flight showed that the flight test vehicle successfully separated without any recontact. Reconstructed trajectory data also showed that first stage flight dynamics were well characterized by pre-flight Monte Carlo results. In addition, comparisons with flight data indicated that the complex interference aerodynamic models employed in the reentry simulation were effective in capturing the flight dynamics during separation. Finally, the splash-down locations of both stages were well within predicted impact ellipses.

  11. Pawnee Nation Energy Option Analyses

    SciTech Connect

    Matlock, M.; Kersey, K.; Riding In, C.

    2009-07-21

    Pawnee Nation of Oklahoma Energy Option Analyses In 2003, the Pawnee Nation leadership identified the need for the tribe to comprehensively address its energy issues. During a strategic energy planning workshop a general framework was laid out and the Pawnee Nation Energy Task Force was created to work toward further development of the tribe’s energy vision. The overarching goals of the “first steps” project were to identify the most appropriate focus for its strategic energy initiatives going forward, and to provide information necessary to take the next steps in pursuit of the “best fit” energy options. Description of Activities Performed The research team reviewed existing data pertaining to the availability of biomass (focusing on woody biomass, agricultural biomass/bio-energy crops, and methane capture), solar, wind and hydropower resources on the Pawnee-owned lands. Using these data, combined with assumptions about costs and revenue streams, the research team performed preliminary feasibility assessments for each resource category. The research team also reviewed available funding resources and made recommendations to Pawnee Nation highlighting those resources with the greatest potential for financially-viable development, both in the near-term and over a longer time horizon. Findings and Recommendations Due to a lack of financial incentives for renewable energy, particularly at the state level, combined mediocre renewable energy resources, renewable energy development opportunities are limited for Pawnee Nation. However, near-term potential exists for development of solar hot water at the gym, and an exterior wood-fired boiler system at the tribe’s main administrative building. Pawnee Nation should also explore options for developing LFGTE resources in collaboration with the City of Pawnee. Significant potential may also exist for development of bio-energy resources within the next decade. Pawnee Nation representatives should closely monitor

  12. Fracturing and brittleness index analyses of shales

    NASA Astrophysics Data System (ADS)

    Barnhoorn, Auke; Primarini, Mutia; Houben, Maartje

    2016-04-01

    The formation of a fracture network in rocks has a crucial control on the flow behaviour of fluids. In addition, an existing network of fractures , influences the propagation of new fractures during e.g. hydraulic fracturing or during a seismic event. Understanding of the type and characteristics of the fracture network that will be formed during e.g. hydraulic fracturing is thus crucial to better predict the outcome of a hydraulic fracturing job. For this, knowledge of the rock properties is crucial. The brittleness index is often used as a rock property that can be used to predict the fracturing behaviour of a rock for e.g. hydraulic fracturing of shales. Various terminologies of the brittleness index (BI1, BI2 and BI3) exist based on mineralogy, elastic constants and stress-strain behaviour (Jin et al., 2014, Jarvie et al., 2007 and Holt et al., 2011). A maximum brittleness index of 1 predicts very good and efficient fracturing behaviour while a minimum brittleness index of 0 predicts a much more ductile shale behaviour. Here, we have performed systematic petrophysical, acoustic and geomechanical analyses on a set of shale samples from Whitby (UK) and we have determined the three different brittleness indices on each sample by performing all the analyses on each of the samples. We show that each of the three brittleness indices are very different for the same sample and as such it can be concluded that the brittleness index is not a good predictor of the fracturing behaviour of shales. The brittleness index based on the acoustic data (BI1) all lie around values of 0.5, while the brittleness index based on the stress strain data (BI2) give an average brittleness index around 0.75, whereas the mineralogy brittleness index (BI3) predict values below 0.2. This shows that by using different estimates of the brittleness index different decisions can be made for hydraulic fracturing. If we would rely on the mineralogy (BI3), the Whitby mudstone is not a suitable

  13. Feed analyses and their interpretation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Compositional analysis is central to determining the nutritional value of feedstuffs. The utility of the values and how they should be used depends on how representative the feed subsample is, the nutritional relevance of the assays, analytical variability of the analyses, and whether a feed is suit...

  14. Analysing Children's Drawings: Applied Imagination

    ERIC Educational Resources Information Center

    Bland, Derek

    2012-01-01

    This article centres on a research project in which freehand drawings provided a richly creative and colourful data source of children's imagined, ideal learning environments. Issues concerning the analysis of the visual data are discussed, in particular, how imaginative content was analysed and how the analytical process was dependent on an…

  15. The Physics of Equestrian Show Jumping

    ERIC Educational Resources Information Center

    Stinner, Art

    2014-01-01

    This article discusses the kinematics and dynamics of equestrian show jumping. For some time I have attended a series of show jumping events at Spruce Meadows, an international equestrian center near Calgary, Alberta, often referred to as the "Wimbledon of equestrian jumping." I have always had a desire to write an article such as this…

  16. Serving Up Activities for TV Cooking Shows.

    ERIC Educational Resources Information Center

    Katchen, Johanna E.

    This paper documents a presentation given on the use of English-language television cooking shows in English-as-a-Second-Language (ESL) and English-as-a-Foreign-Language (EFL) classrooms in Taiwan. Such shows can be ideal for classroom use, since they have a predictable structure consisting of short segments, are of interest to most students,…

  17. 47 CFR 90.505 - Showing required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MOBILE RADIO SERVICES Developmental Operation § 90.505 Showing required. (a) Except as provided in paragraph (b) of this section, each application for developmental operation shall be accompanied by a showing that: (1) The applicant has an organized plan of development leading to a specific objective;...

  18. The Language of Show Biz: A Dictionary.

    ERIC Educational Resources Information Center

    Sergel, Sherman Louis, Ed.

    This dictionary of the language of show biz provides the layman with definitions and essays on terms and expressions often used in show business. The overall pattern of selection was intended to be more rather than less inclusive, though radio, television, and film terms were deliberately omitted. Lengthy explanations are sometimes used to express…

  19. Nature's Late-Night Light Shows

    NASA Astrophysics Data System (ADS)

    Peterson, Carolyn Collins

    2002-09-01

    In addition to stars and planets, there are other interesting lights to be seen in the night sky. The northern and southern lights, called the aurora borealis and aurora australis, are created by charged particles from the Sun reacting in Earth's magnetic field. Night-shining clouds or noctilucent clouds appear at evening twilight as a result of water vapor in the polar mesosphere. Zodiacal light can be seen stretching up from the horizon after sunset or before sunrise.

  20. Cincinnati Big Area Additive Manufacturing (BAAM)

    SciTech Connect

    Duty, Chad E.; Love, Lonnie J.

    2015-03-04

    Oak Ridge National Laboratory (ORNL) worked with Cincinnati Incorporated (CI) to demonstrate Big Area Additive Manufacturing which increases the speed of the additive manufacturing (AM) process by over 1000X, increases the size of parts by over 10X and shows a cost reduction of over 100X. ORNL worked with CI to transition the Big Area Additive Manufacturing (BAAM) technology from a proof-of-principle (TRL 2-3) demonstration to a prototype product stage (TRL 7-8).

  1. Characterization of Metal Powders Used for Additive Manufacturing

    PubMed Central

    Slotwinski, JA; Garboczi, EJ; Stutzman, PE; Ferraris, CF; Watson, SS; Peltz, MA

    2014-01-01

    Additive manufacturing (AM) techniques1 can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process. PMID:26601040

  2. Characterization of Metal Powders Used for Additive Manufacturing.

    PubMed

    Slotwinski, J A; Garboczi, E J; Stutzman, P E; Ferraris, C F; Watson, S S; Peltz, M A

    2014-01-01

    Additive manufacturing (AM) techniques can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process.

  3. Laboratory analyses of two explanted hydrophobic acrylic intraocular lenses.

    PubMed

    Dai, Yunhai; Huang, Yusen; Liu, Ting; Xie, Lixin

    2014-06-01

    Two three-piece hydrophobic acrylic intraocular lenses (IOLs) were explanted from two patients at 7 and 9 years, respectively, after implantation, because of poor fundus visualisation and/or a clinically significant decrease in visual acuity related to their opacified IOLs. In addition to light microscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy, confocal laser scanning microscopy was used for the first time to observe the explanted IOLs. The clinical aspect seemed to correspond to the phenomenon of surface light scattering, while laboratory analyses showed dense glistenings in the central layer of the IOL optic, which had no change next to the surface. Further studies on these phenomena are needed.

  4. Mercury's Core Molten, Radar Study Shows

    NASA Astrophysics Data System (ADS)

    2007-05-01

    processes involved in planet formation," Margot said. To answer the question, the scientists implemented an ingenious, high-precision technique in which they sent a powerful beam of radio waves to bounce off Mercury, then received and analyzed the reflected signal using pairs of ground-based radio telescopes. While similar radar systems have been used in the past to map planetary surfaces, this technique instead measured the rate at which Mercury spins on its axis, and did so with an unprecedented precision of one part in 100,000. By making 21 separate observations, the research team was able to measure minute variations in the planet's spin rate. This was the key to learning whether Mercury's core is solid or molten. Using an understanding of the Sun's gravitational effect on the planet, they realized that the tiny variations in its spin rate would be twice as large if the core is liquid than they would be if Mercury has a solid core. "The variations in Mercury's spin rate that we measured are best explained by a core that is at least partially molten. We have a 95 percent confidence level in this conclusion," Margot said. For most of their observations, carried out from 2002-2006, the scientists transmitted a powerful radar beam from the NASA/JPL 70-meter antenna at Goldstone, California, and received the reflected signal with the Green Bank Telescope and the Goldstone antenna. For some observations, they transmitted from the Arecibo Observatory in Puerto Rico and received at Arecibo and two Goldstone antennas. They used radar signals at frequencies of 8.5 and 2.4 GHz. To make the precision measurements of Mercury's spin rate, the geometry between the planet and the receiving antennas had to match a specific alignment. Such an alignment only occurs for about 20 seconds a day. In addition to measuring Mercury's spin rate, their technique also made the best measurement ever of the alignment of the planet's axis of rotation. "We improved the accuracy of this measurement by

  5. Gene Therapy Shows Promise for Aggressive Lymphoma

    MedlinePlus

    ... fullstory_163824.html Gene Therapy Shows Promise for Aggressive Lymphoma Over one-third of patients appeared disease- ... 2017 (HealthDay News) -- An experimental gene therapy for aggressive non-Hodgkin lymphoma beat back more than a ...

  6. Poverty Harder on Women's Hearts, Research Shows

    MedlinePlus

    ... page: https://medlineplus.gov/news/fullstory_163168.html Poverty Harder on Women's Hearts, Research Shows Poor females ... reduce the burden of cardiovascular disease around the world," Peters said. The study findings were published online ...

  7. Do dogs (Canis familiaris) show contagious yawning?

    PubMed

    Harr, Aimee L; Gilbert, Valerie R; Phillips, Kimberley A

    2009-11-01

    We report an experimental investigation into whether domesticated dogs display contagious yawning. Fifteen dogs were shown video clips of (1) humans and (2) dogs displaying yawns and open-mouth expressions (not yawns) to investigate whether dogs showed contagious yawning to either of these social stimuli. Only one dog performed significantly more yawns during or shortly after viewing yawning videos than to the open-mouth videos, and most of these yawns occurred to the human videos. No dogs showed significantly more yawning to the open-mouth videos (human or dog). The percentage of dogs showing contagious yawning was less than chimpanzees and humans showing this behavior, and considerably less than a recently published report investigating this behavior in dogs (Joly-Mascheroni et al. in Biol Lett 4:446-448, 2008).

  8. Spacecraft Image Mashup Shows Galactic Collision

    NASA Video Gallery

    This new composite image from the Chandra X-ray Observatory, the Hubble Space Telescope, and the Spitzer Space Telescope shows two colliding galaxies more than a 100 million years after they first ...

  9. Study Shows How Zika Attacks Infant Brain

    MedlinePlus

    ... gov/news/fullstory_162514.html Study Shows How Zika Attacks Infant Brain Virus can copy itself thousands ... New research paints a chilling portrait of how Zika ravages the infant brain. Scientists from the U.S. ...

  10. Fecal Transplant Shows Early Promise Against Autism

    MedlinePlus

    ... 163263.html Fecal Transplant Shows Early Promise Against Autism Small study found giving healthy gut bacteria to ... study suggests a novel treatment for kids with autism: Give these young patients a fresh supply of ...

  11. TRMM Satellite Shows Heavy Rainfall in Cristina

    NASA Video Gallery

    NASA's TRMM satellite rainfall data was overlaid on an enhanced visible/infrared image from NOAA's GOES-East satellite showing cloud and rainfall extent. Green areas indicate rainfall at over 20 mm...

  12. GOES Satellite Data Shows Tornado Development

    NASA Video Gallery

    This animation of NOAA's GOES-East satellite data shows the development and movement of the weather system that spawned tornadoes affecting the southern and eastern U.S. states on April 27-29, 2014...

  13. Do men and women show love differently in marriage?

    PubMed

    Schoenfeld, Elizabeth A; Bredow, Carrie A; Huston, Ted L

    2012-11-01

    In Western societies, women are considered more adept than men at expressing love in romantic relationships. Although scholars have argued that this view of love gives short shrift to men's ways of showing love (e.g., Cancian, 1986; Noller, 1996), the widely embraced premise that men and women "love differently" has rarely been examined empirically. Using data collected at four time points over 13 years of marriage, the authors examined whether love is associated with different behaviors for husbands and wives. Multilevel analyses revealed that, counter to theoretical expectations, both genders were equally likely to show love through affection. But whereas wives expressed love by enacting fewer negative or antagonistic behaviors, husbands showed love by initiating sex, sharing leisure activities, and doing household work together with their wives. Overall, the findings indicate that men and women show their love in more nuanced ways than cultural stereotypes suggest.

  14. Map showing fluorspar deposits in Colorado

    USGS Publications Warehouse

    Brady, Bruce T.

    1975-01-01

    Increased fluorine consumption (U.S. Bureau of Mines, 1946-1971) coupled with limited proved reserves has stimulated extensive exploration for fluorine and intensive research into developing new sources of fluorine or substitutes. A summary of the distribution, geochemical and geologic environments, and production history of selected fluorspar occurrences, deposits, and districts is provided here with the hope that this information will help to stimulate exploration and discovery of additional fluorspar resources in Colorado to augment our dwindling domestic supply.

  15. Archaea signal recognition particle shows the way.

    PubMed

    Zwieb, Christian; Bhuiyan, Shakhawat

    2010-06-28

    Archaea SRP is composed of an SRP RNA molecule and two bound proteins named SRP19 and SRP54. Regulated by the binding and hydrolysis of guanosine triphosphates, the RNA-bound SRP54 protein transiently associates not only with the hydrophobic signal sequence as it emerges from the ribosomal exit tunnel, but also interacts with the membrane-associated SRP receptor (FtsY). Comparative analyses of the archaea genomes and their SRP component sequences, combined with structural and biochemical data, support a prominent role of the SRP RNA in the assembly and function of the archaea SRP. The 5e motif, which in eukaryotes binds a 72 kilodalton protein, is preserved in most archaea SRP RNAs despite the lack of an archaea SRP72 homolog. The primary function of the 5e region may be to serve as a hinge, strategically positioned between the small and large SRP domain, allowing the elongated SRP to bind simultaneously to distant ribosomal sites. SRP19, required in eukaryotes for initiating SRP assembly, appears to play a subordinate role in the archaea SRP or may be defunct. The N-terminal A region and a novel C-terminal R region of the archaea SRP receptor (FtsY) are strikingly diverse or absent even among the members of a taxonomic subgroup.

  16. Nonlinear structural crash dynamics analyses

    NASA Technical Reports Server (NTRS)

    Hayduk, R. J.; Thomson, R. G.; Wittlin, G.; Kamat, M. P.

    1979-01-01

    Presented in this paper are the results of three nonlinear computer programs, KRASH, ACTION and DYCAST used to analyze the dynamic response of a twin-engine, low-wing airplane section subjected to a 8.38 m/s (27.5 ft/s) vertical impact velocity crash condition. This impact condition simulates the vertical sink rate in a shallow aircraft landing or takeoff accident. The three distinct analysis techniques for nonlinear dynamic response of aircraft structures are briefly examined and compared versus each other and the experimental data. The report contains brief descriptions of the three computer programs, the respective aircraft section mathematical models, pertinent data from the experimental test performed at NASA Langley, and a comparison of the analyses versus test results. Cost and accuracy comparisons between the three analyses are made to illustrate the possible uses of the different nonlinear programs and their future potential.

  17. Educational Outreach: The Space Science Road Show

    NASA Astrophysics Data System (ADS)

    Cox, N. L. J.

    2002-01-01

    The poster presented will give an overview of a study towards a "Space Road Show". The topic of this show is space science. The target group is adolescents, aged 12 to 15, at Dutch high schools. The show and its accompanying experiments would be supported with suitable educational material. Science teachers at schools can decide for themselves if they want to use this material in advance, afterwards or not at all. The aims of this outreach effort are: to motivate students for space science and engineering, to help them understand the importance of (space) research, to give them a positive feeling about the possibilities offered by space and in the process give them useful knowledge on space basics. The show revolves around three main themes: applications, science and society. First the students will get some historical background on the importance of space/astronomy to civilization. Secondly they will learn more about novel uses of space. On the one hand they will learn of "Views on Earth" involving technologies like Remote Sensing (or Spying), Communication, Broadcasting, GPS and Telemedicine. On the other hand they will experience "Views on Space" illustrated by past, present and future space research missions, like the space exploration missions (Cassini/Huygens, Mars Express and Rosetta) and the astronomy missions (Soho and XMM). Meanwhile, the students will learn more about the technology of launchers and satellites needed to accomplish these space missions. Throughout the show and especially towards the end attention will be paid to the third theme "Why go to space"? Other reasons for people to get into space will be explored. An important question in this is the commercial (manned) exploration of space. Thus, the questions of benefit of space to society are integrated in the entire show. It raises some fundamental questions about the effects of space travel on our environment, poverty and other moral issues. The show attempts to connect scientific with

  18. Supplementary report on antilock analyses

    NASA Technical Reports Server (NTRS)

    Zellner, J. W.

    1985-01-01

    Generic modulator analysis was performed to quantify the effects of dump and reapply pressure rates on antilock stability and performance. Analysis will include dump and reapply rates, and lumped modulator delay. Based on the results of the generic modulator analysis and earlier toggle optimization analysis (with Mitsubishi modulator), a recommended preliminary antilock design was synthesized and its response and performance simulated. The results of these analyses are documented.

  19. Analysing chemical-induced changes in macroinvertebrate communities in aquatic mesocosm experiments: a comparison of methods.

    PubMed

    Szöcs, Eduard; Van den Brink, Paul J; Lagadic, Laurent; Caquet, Thierry; Roucaute, Marc; Auber, Arnaud; Bayona, Yannick; Liess, Matthias; Ebke, Peter; Ippolito, Alessio; ter Braak, Cajo J F; Brock, Theo C M; Schäfer, Ralf B

    2015-05-01

    Mesocosm experiments that study the ecological impact of chemicals are often analysed using the multivariate method 'Principal Response Curves' (PRCs). Recently, the extension of generalised linear models (GLMs) to multivariate data was introduced as a tool to analyse community data in ecology. Moreover, data aggregation techniques that can be analysed with univariate statistics have been proposed. The aim of this study was to compare their performance. We compiled macroinvertebrate abundance datasets of mesocosm experiments designed for studying the effect of various organic chemicals, mainly pesticides, and re-analysed them. GLMs for multivariate data and selected aggregated endpoints were compared to PRCs regarding their performance and potential to identify affected taxa. In addition, we analysed the inter-replicate variability encountered in the studies. Mesocosm experiments characterised by a higher taxa richness of the community and/or lower taxonomic resolution showed a greater inter-replicate variability, whereas variability decreased the more zero counts were encountered in the samples. GLMs for multivariate data performed equally well as PRCs regarding the community response. However, compared to first axis PRCs, GLMs provided a better indication of individual taxa responding to treatments, as separate models are fitted to each taxon. Data aggregation methods performed considerably poorer compared to PRCs. Multivariate community data, which are generated during mesocosm experiments, should be analysed using multivariate methods to reveal treatment-related community-level responses. GLMs for multivariate data are an alternative to the widely used PRCs.

  20. Genome-Facilitated Analyses of Geomicrobial Processes

    SciTech Connect

    Kenneth H. Nealson

    2012-05-02

    that makes up chitin, virtually all of the strains were in fact capable. This led to the discovery of a great many new genes involved with chitin and NAG metabolism (7). In a similar vein, a detailed study of the sugar utilization pathway revealed a major new insight into the regulation of sugar metabolism in this genus (19). Systems Biology and Comparative Genomics of the shewanellae: Several publications were put together describing the use of comparative genomics for analyses of the group Shewanella, and these were a logical culmination of our genomic-driven research (10,15,18). Eight graduate students received their Ph.D. degrees doing part of the work described here, and four postdoctoral fellows were supported. In addition, approximately 20 undergraduates took part in projects during the grant period.

  1. Liquid Crystal Research Shows Deformation By Drying

    NASA Technical Reports Server (NTRS)

    2003-01-01

    These images, from David Weitz's liquid crystal research, show ordered uniform sized droplets (upper left) before they are dried from their solution. After the droplets are dried (upper right), they are viewed with crossed polarizers that show the deformation caused by drying, a process that orients the bipolar structure of the liquid crystal within the droplets. When an electric field is applied to the dried droplets (lower left), and then increased (lower right), the liquid crystal within the droplets switches its alignment, thereby reducing the amount of light that can be scattered by the droplets when a beam is shone through them.

  2. Optimizing header strength utilizing finite element analyses

    NASA Astrophysics Data System (ADS)

    Burchett, S. N.

    Finite element techniques have been successfully applied as a design tool in the optimization of high strength headers for pyrotechnic-driven actuators. These techniques have been applied to three aspects of the design process of a high strength header. The design process was a joint effort of experts from several disciplines including design engineers, material scientists, test engineers, manufacturing engineers, and structural analysts. Following material selection, finite element techniques were applied to evaluate the residual stresses due to manufacturing which were developed in the high strength glass ceramic-to-metal seal headers. Results from these finite element analyses were used to identify header designs which were manufacturable and had a minimum residual stress state. Finite element techniques were than applied to obtain the response of the header due to pyrotechnic burn. The results provided realistic upper bounds on the pressure containment ability of various preliminary header designs and provided a quick and inexpensive method of strengthening and refining the designs. Since testing of the headers was difficult and sometimes destructive, results of the analyses were also used to interpret test results and identify failure modes. In this paper, details of the finite element element techniques including the models used, material properties, material failure models, and loading will be presented. Results from the analyses showing the header failure process will also be presented. This paper will show that significant gains in capability and understanding can result when finite element techniques are included as an integral part of the design process of complicated high strength headers.

  3. High perfomance liquid chromatography in pharmaceutical analyses.

    PubMed

    Nikolin, Branko; Imamović, Belma; Medanhodzić-Vuk, Saira; Sober, Miroslav

    2004-05-01

    compounds often present in concentrations much greater than those of analyte. Analiyte concentrations are often low, and in the case of drugs, the endogenous compounds are sometimes structurally very similar to the drug to be measured. The binding of drugs to the plasma protein also may occur which decreases the amount of free compound that is measured. To undertake the analyses of drugs and metabolites in body fluids the analyst is facet with several problems. The first problem is due to the complex nature of the body fluid, the drugs must be isolated by an extraction technique, which ideally should provide a relatively clean extract, and the separation system must be capable of resolving the drugs of interest from co extractives. All mentioned when we are using high performance liquid chromatography require good selections of detectors, good stationary phase, eluents and adequate program during separation. UV/VIS detector is the most versatile detector used in high performance liquid chromatography it is not always ideal since it is lack of specificity means high resolution of the analyte that may be required. UV detection is preferred since it offers excellent linearity and rapid quantitative analyses can be performed against a single standard of the drug being determined. Diode array and rapid scanning detector are useful for peak identification and monitoring peak purity but they are somewhat less sensitive then single wavelength detectors. In liquid chromatography some components may have a poor UV chromophores if UV detection is being used or be completely retained on the liquid chromatography column. Fluorescence and electrochemical detector are not only considerably more sensitive towed appropriate analytes but also more selective than UV detectors for many compounds. If at all possible fluorescence detectors are sensitive, stable, selective and easy to operate. It is selectivity shows itself in the lack of frontal components observed in plasma extract whereas

  4. How Safe Are Color Additives?

    MedlinePlus

    ... Home For Consumers Consumer Updates How Safe are Color Additives? Share Tweet Linkedin Pin it More sharing ... Consumer Updates RSS Feed Download PDF (380 K) Color additives give the red tint to your fruit ...

  5. Show Them You Really Want the Job

    ERIC Educational Resources Information Center

    Perlmutter, David D.

    2012-01-01

    Showing that one really "wants" the job entails more than just really wanting the job. An interview is part Broadway casting call, part intellectual dating game, part personality test, and part, well, job interview. When there are 300 applicants for a position, many of them will "fit" the required (and even the preferred) skills listed in the job…

  6. EFFECT OF REPETITIVE FILM SHOWINGS ON LEARNING.

    ERIC Educational Resources Information Center

    MCTAVISH, C.L.; AND OTHERS

    A DETERMINATION OF THE INCREMENT IN LEARNING ATTRIBUTABLE SOLELY TO ONE, TWO, AND THREE REPETITIONS OF A FILM OVER AND ABOVE A SINGLE SHOWING WAS INVESTIGATED. THE SUBJECTS WERE 319 COLLEGE FRESHMEN WHO WERE DIVIDED INTO FOUR GROUPS AND WHO WERE SHOWN FOUR GENERAL SCIENCE FILMS. EACH GROUP SAW ONE OF THE FILMS ONCE, A SECOND FILM TWICE, A THIRD…

  7. Showing Enantiomorphous Crystals of Tartaric Acid

    ERIC Educational Resources Information Center

    Andrade-Gamboa, Julio

    2007-01-01

    Most of the articles and textbooks that show drawings of enantiomorphous crystals use an inadequate view to appreciate the fact that they are non-superimposable mirror images of one another. If a graphical presentation of crystal chirality is not evident, the main attribute of crystal enantiomorphism can not be recognized by students. The classic…

  8. Laser entertainment and light shows in education

    NASA Astrophysics Data System (ADS)

    Sabaratnam, Andrew T.; Symons, Charles

    2002-05-01

    Laser shows and beam effects have been a source of entertainment since its first public performance May 9, 1969, at Mills College in Oakland, California. Since 1997, the Photonics Center, NgeeAnn Polytechnic, Singapore, has been using laser shows as a teaching tool. Students are able to exhibit their creative skills and learn at the same time how lasers are used in the entertainment industry. Students will acquire a number of skills including handling three- phase power supply, operation of cooling system, and laser alignment. Students also acquire an appreciation of the arts, learning about shapes and contours as they develop graphics for the shows. After holography, laser show animation provides a combination of the arts and technology. This paper aims to briefly describe how a krypton-argon laser, galvanometer scanners, a polychromatic acousto-optic modulator and related electronics are put together to develop a laser projector. The paper also describes how students are trained to make their own laser animation and beam effects with music, and at the same time have an appreciation of the operation of a Class IV laser and the handling of optical components.

  9. 47 CFR 90.505 - Showing required.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Developmental Operation § 90.505 Showing required. (a) Except as provided in...) The actual transmission by radio is essential to proceed beyond the present stage of the program;...

  10. 47 CFR 90.505 - Showing required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Developmental Operation § 90.505 Showing required. (a) Except as provided in...) The actual transmission by radio is essential to proceed beyond the present stage of the program;...

  11. Tilapia show immunization response against Ich

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study compares the immune response of Nile tilapia and red tilapia against parasite Ichthyophthirius multifiliis (Ich) using a cohabitation challenge model. Both Nile and red tilapia showed strong immune response post immunization with live Ich theronts by IP injection or immersion. Blood serum...

  12. A Talk Show from the Past.

    ERIC Educational Resources Information Center

    Gallagher, Arlene F.

    1991-01-01

    Describes a two-day activity in which elementary students examine voting rights, the right to assemble, and women's suffrage. Explains the game, "Assemble, Reassemble," and a student-produced talk show with five students playing the roles of leaders of the women's suffrage movement. Profiles Elizabeth Cady Stanton, Lucretia Mott, Susan…

  13. State Data Show Gains in Reading

    ERIC Educational Resources Information Center

    Manzo, Kathleen Kennedy

    2007-01-01

    Schools taking part in the federal Reading First program are showing significant progress in boosting students' reading fluency and comprehension, according to state-reported data compiled and released by the U.S. Department of Education last week. In releasing for the first time detailed, multiyear data on how Reading First schools are performing…

  14. Self-Organizing Systems Show Apparent Intentionality

    NASA Astrophysics Data System (ADS)

    Tschacher, Wolfganfg; Dauwalder, Jean-Pierre; Haken, Hermann

    Cognitive science is frequently confronted with mind-body issues—is there a way by which the mentalist and the physical approaches to cognition can be integrated? Can the intentional attributes of mind be understood in physical terms? We propose that synergetics, the theory of nonlinear complex systems, offers steps towards a possible solution to this notorious problem. In particular, we claim that an essential property of self-organized pattern formation lies in its functionality, i.e. the ability to respond and adapt 'meaningfully' to environmental constraints. Patterns become functional because they consume the gradients that caused their evolution, and, in addition, they consume them in the most efficient manner. This makes synergetic pattern formation appear 'intentional'. Therefore, we suggest that self-organization phenomena may be considered basic explanations of the adaptive, intentional, and purposive behavior of many complex systems, in particular cognitive systems.

  15. AIDS control: TN may show the way.

    PubMed

    1999-04-19

    The successful experiences of Tamil Nadu (TN) in the control and prevention of HIV/AIDS provides vital clues for the second phase of the Rs. 1,150-crore World Bank-funded national AIDS control program which will begin in July. The National AIDS Control Organization (NACO) is looking at TN for concrete answers in several areas before it composes its guidelines for the second phase. Key areas of focus in the second phase will be high-risk groups, control of STDs, people living with AIDS, communication structures and blood safety. NACO and the funding agency has been impressed by TN¿s method of mobilizing NGOs in the massive anti-HIV/AIDS campaign and its handling of the cost of the care. In addition to the Tamil Nadu State AIDS Control Society (TNSACS), the AIDS Prevention and Control Project of the Voluntary Health Services (supported by USAID) also contributed to the impressive performance of this State.

  16. Detergent Additive for Lubricating Oils,

    DTIC Science & Technology

    The Russian patent pertains to a method of producing additives for lubricating oils . A method is known for producing an antiwear additive for... lubricating oils by processing phenols with phosphorus oxychloride, phosphoric acid esters are obtained. In order to give the additive detergent properties

  17. Nitrogen as a friendly addition to steel

    SciTech Connect

    Rawers, J.C.

    2006-01-01

    Interstitial alloying with nitrogen or carbon is a common means of enhancing properties of iron-based alloys. Interstitial nitrogen addition to fcc-phase Fe-Cr-Mn/Ni alloys results in improved mechanical properties, whereas addition of carbon can result in the formation of unwanted carbides. Carbon addition to low alloy, bcc-phase iron alloys significantly improves strength through the formation of carbides, whereas addition of nitrogen in bcc-phase iron alloys can result in porous casting and reduced mechanical properties. This study will show that alloying iron-based alloys with both nitrogen and carbon can produce positive results. Nitrogen addition to Fe-C and Fe-Cr-C alloys, and both nitrogen and nitrogen-carbon additions to Fe-Cr-Mn/Ni alloys altered the microstructure, improved mechanical properties, increased hardness, and reduced wear by stabilizing the fcc-phase and altering (possibly eliminating) precipitate formation.

  18. 4. VIEW SHOWING NORTHEAST ELEVATION WITH STEEL SASH AND STUCCO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW SHOWING NORTHEAST ELEVATION WITH STEEL SASH AND STUCCO WALL FINISH, LOOKING SOUTH; 1906-1910 ONE-STORY SHED ADDITION WITH ROOF MONITOR IS IN FOREGROUND LEFT - Massachusetts Mills, Cloth Room-Section 15, 95 Bridge Street, Lowell, Middlesex County, MA

  19. 3. OBLIQUE CONTEXTUAL VIEW FROM NORTHWEST, SHOWING OVER HALF OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. OBLIQUE CONTEXTUAL VIEW FROM NORTHWEST, SHOWING OVER HALF OF MILLS HALL MAIN WING, NORTH WALL, ALL OF MILLS HALL NORTH WING WEST WALL, AND ADDITION NORTH AND WEST WALLS. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  20. 5. EXTERIOR OF WEST (REAR) SIDE OF BUILDING 103 SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF WEST (REAR) SIDE OF BUILDING 103 SHOWING TALL RUSTIC STYLE CHIMNEY WITH GABLE FRAME, AND CONCRETE STEPS TO SIDE ENTRY DOOR AT PHOTO RIGHT. CHANGE IN EXTERIOR WALL DELINEATING 1946 BEDROOM ADDITION AND REMODELED WINDOW TO BATHROOM ARE VISIBLE AT PHOTO LEFT. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  1. 5. EXTERIOR OF NORTH END OF BUILDINT 104 SHOWING WOODSIDED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF NORTH END OF BUILDINT 104 SHOWING WOODSIDED BEDROOM ADDITION TO FRONT OF HOUSE, AND SMALL GABLE ROOF OVER FORMER BATHROOM PROJECTION ON NORTH END OF HOUSE. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  2. 3. EXTERIOR OF SOUTH END OF BUILDING 104 SHOWING PAVED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. EXTERIOR OF SOUTH END OF BUILDING 104 SHOWING PAVED VEHICLE ACCESS AND ROCK RETAINING WALL CAPPED BY METAL HANDRAIL. BOTH BASEMENT DOORS (BELOW KITCHEN WINDOWS AT PHOTO CENTER AND BELOW WOODSIDED BEDROOM ADDITION AT PHOTO RIGHT) ARE VISIBLE IN THIS VIEW. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  3. View of building 11050 looking northeast, showing metal sided and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of building 11050 looking northeast, showing metal sided and roofed addition on east elevation. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Fire Station & Marine Barracks, D Street, at corner of 4th Street, China Lake, Kern County, CA

  4. 167. ARAIII Plot plan as of 1986. Shows most of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    167. ARA-III Plot plan as of 1986. Shows most of original army buildings in addition to location for buildings ARA-621 and ARA-630, which were built in 1969 after army program had been canceled. Date: March 1986. Ineel index code no. 063-0100-00-220-421241. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  5. 4. EXTERIOR OF SOUTH END OF BUILDING 108 SHOWING STORM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. EXTERIOR OF SOUTH END OF BUILDING 108 SHOWING STORM PORCH ADDITION AND WINDOWS ALONG BACK (WEST SIDE) OF HOUSE. NOTE ORIGNAL SHORT CHIMNEY AT CREST OF ROOF. VIEW TO NORTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  6. 5. EXTERIOR OF SOUTH END OF HOUSE SHOWING OPEN DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EXTERIOR OF SOUTH END OF HOUSE SHOWING OPEN DOOR TO BASEMENT BELOW KITCHEN, ORIGINAL PAIRED WOODFRAMED SLIDING-GLASS WINDOWS ON KITCHEN WALL AND 1LIGHT OVER 1-LIGHT DOUBLE-HUNG WINDOW ON STORM PORCH ADDITION. VIEW TO WEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  7. 5. Photocopy of old exterior photo showing Western Saving Fund ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photocopy of old exterior photo showing Western Saving Fund Society before the addition of ca. 1910 building. Original photo, late 19th century, is at the Philadelphia Free Library, Philadelphia Collection, Print and Picture Department. - Western Saving Fund Society of Philadelphia, 1000-1008 Walnut Street, Philadelphia, Philadelphia County, PA

  8. 1. Photographic copy of engineering drawing showing structure of Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing structure of Test Stand 'B' (4215/E-16), also known as the 'Short Snorter.' California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Structural Addition - Bldg. E-12, Edwards Test Station,' drawing no. E12/1-1, 8 August 1957. - Jet Propulsion Laboratory Edwards Facility, Test Stand B, Edwards Air Force Base, Boron, Kern County, CA

  9. Building No. 391, interior showing roof support structure, horizontal tank ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building No. 391, interior showing roof support structure, horizontal tank on dolly, view facing west - U.S. Naval Base, Pearl Harbor, Marine Railway No. 1 Accessories House & Apprentice Welding School, Additions, Intersection of Avenue B & Sixth Street, Pearl City, Honolulu County, HI

  10. 10. Photocopy of c. 1912 photograph looking N showing original ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Photocopy of c. 1912 photograph looking N showing original c. 1845 brick mill with c. 1897 3-story, wood-frame addition at end; cane shed extends out to the left. - Laurel Valley Sugar Plantation, Sugar Mill, 2 miles South of Thibodaux on State Route 308, Thibodaux, Lafourche Parish, LA

  11. 4. NORTH ELEVATION, SHOWING COLLAPSED MARYLAND NEW RIVER COAL COMPANY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. NORTH ELEVATION, SHOWING COLLAPSED MARYLAND NEW RIVER COAL COMPANY ADDITION, WITH REFUSE CONVEYOR (FOREGROUND), TIMBER REFUSE BIN (LEFT), CONVEYOR HOUSE AND SCREENING ROOM (CENTER), AND COAL STORAGE SILO (RIGHT), LOOKING EAST - Nuttallburg Mine Complex, Tipple, North side of New River, 2.7 miles upstream from Fayette Landing, Lookout, Fayette County, WV

  12. Human platelet sulfotransferase shows seasonal rhythms.

    PubMed

    Marazziti, D; Palego, L; Mazzanti, C; Silvestri, S; Cassano, G B

    1995-04-01

    Our study aimed to investigate the possible presence of seasonal changes in platelet phenolsulfotransferase (ST) in a group of 20 healthy, drug-free subjects of both sexes between 24 and 37 years of age. Blood samples were taken four times a year in the period immediately following the equinoxes and the solstices. The results showed that both Sts underwent seasonal changes: the lowest values were found in autumn and in winter, and the highest in the summer. A positive correlation between the two STs and the length of the photoperiod was observed in winter whereas in the spring we detected a negative correlation between the TL ST and the photoperiod length. Future studies should clarify whether platelet ST of patients with mood disorders shows a similar seasonality.

  13. Male genital leiomyomas showing androgen receptor expression.

    PubMed

    Suárez-Peñaranda, José Manuel; Vieites, Begoña; Evgenyeva, Elena; Vázquez-Veiga, Hugo; Forteza, Jeronimo

    2007-12-01

    Genital leiomyoma in men include those superficial leiomyomas arising in the scrotum and the areola. They are unusual neoplasms: few cases have been reported in the literature and they usually escape clinical diagnosis. Three cases of male genital leiomyomas are reported: two in the scrotum and one in the areola. They were all conservatively excised and the behaviour was completely benign in all cases. Histopathological examination showed the typical findings of superficial leiomyomas, with some minor differences between cases arising in the scrotum and those from the areola. Immunohistochemical findings not only confirmed the smooth muscle nature of all cases but also showed unequivocal immunostaining for androgen receptors in the leiomyomas from the scrotum. Immunostaining for androgen receptors in scrotal leiomyomas is, as far as we are aware, a previously unknown characteristic of male genital leiomyomas. This finding supports the role of steroid hormones in the growth of genital leiomyomas, similar to leiomyomas found in other locations.

  14. Kepler Systems That Show Multiple Transiting Objects

    NASA Astrophysics Data System (ADS)

    Steffen, Jason H.; Fabrycky, D. C.; Ford, E. B.; Holman, M. J.; Lissauer, J. J.; Ragozzine, D.; Welsh, W. F.; Kepler Science Team

    2011-01-01

    Exoplanetary systems that have multiple transiting planets provide unique and important insight into the formation, evolution, and dynamics of exoplanetary systems. Kepler has announced the discovery of a confirmed planetary system with multiple transiting planets (Kepler 9, Holman et al. 2010) as well as several candidate planetary systems that show multiple transiting objects (Steffen et al. 2010). Kepler 9 shows deviations from a constant period due to the ongoing dynamical interactions between the confirmed planets. From these transit timing variations (TTV) one can measure the planetary masses from the photometric data alone. The presence of several systems with multiple transiting candidates from the first quarter of data indicate that Kepler should continue to find systems with multiple transiting planets. Such systems will provide important, general information about the histories of planetary systems.

  15. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  16. New World cattle show ancestry from multiple independent domestication events

    PubMed Central

    McTavish, Emily Jane; Decker, Jared E.; Schnabel, Robert D.; Taylor, Jeremy F.; Hillis, David M.

    2013-01-01

    Previous archeological and genetic research has shown that modern cattle breeds are descended from multiple independent domestication events of the wild aurochs (Bos primigenius) ∼10,000 y ago. Two primary areas of domestication in the Middle East/Europe and the Indian subcontinent resulted in taurine and indicine lines of cattle, respectively. American descendants of cattle brought by European explorers to the New World beginning in 1493 generally have been considered to belong to the taurine lineage. Our analyses of 47,506 single nucleotide polymorphisms show that these New World cattle breeds, as well as many related breeds of cattle in southern Europe, actually exhibit ancestry from both the taurine and indicine lineages. In this study, we show that, although European cattle are largely descended from the taurine lineage, gene flow from African cattle (partially of indicine origin) contributed substantial genomic components to both southern European cattle breeds and their New World descendants. New World cattle breeds, such as Texas Longhorns, provide an opportunity to study global population structure and domestication in cattle. Following their introduction into the Americas in the late 1400s, semiferal herds of cattle underwent between 80 and 200 generations of predominantly natural selection, as opposed to the human-mediated artificial selection of Old World breeding programs. Our analyses of global cattle breed population history show that the hybrid ancestry of New World breeds contributed genetic variation that likely facilitated the adaptation of these breeds to a novel environment. PMID:23530234

  17. New World cattle show ancestry from multiple independent domestication events.

    PubMed

    McTavish, Emily Jane; Decker, Jared E; Schnabel, Robert D; Taylor, Jeremy F; Hillis, David M

    2013-04-09

    Previous archeological and genetic research has shown that modern cattle breeds are descended from multiple independent domestication events of the wild aurochs (Bos primigenius) ∼10,000 y ago. Two primary areas of domestication in the Middle East/Europe and the Indian subcontinent resulted in taurine and indicine lines of cattle, respectively. American descendants of cattle brought by European explorers to the New World beginning in 1493 generally have been considered to belong to the taurine lineage. Our analyses of 47,506 single nucleotide polymorphisms show that these New World cattle breeds, as well as many related breeds of cattle in southern Europe, actually exhibit ancestry from both the taurine and indicine lineages. In this study, we show that, although European cattle are largely descended from the taurine lineage, gene flow from African cattle (partially of indicine origin) contributed substantial genomic components to both southern European cattle breeds and their New World descendants. New World cattle breeds, such as Texas Longhorns, provide an opportunity to study global population structure and domestication in cattle. Following their introduction into the Americas in the late 1400s, semiferal herds of cattle underwent between 80 and 200 generations of predominantly natural selection, as opposed to the human-mediated artificial selection of Old World breeding programs. Our analyses of global cattle breed population history show that the hybrid ancestry of New World breeds contributed genetic variation that likely facilitated the adaptation of these breeds to a novel environment.

  18. Additive manufacturing of optical components

    NASA Astrophysics Data System (ADS)

    Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

    2016-08-01

    The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

  19. Analysing photonic structures in plants

    PubMed Central

    Vignolini, Silvia; Moyroud, Edwige; Glover, Beverley J.; Steiner, Ullrich

    2013-01-01

    The outer layers of a range of plant tissues, including flower petals, leaves and fruits, exhibit an intriguing variation of microscopic structures. Some of these structures include ordered periodic multilayers and diffraction gratings that give rise to interesting optical appearances. The colour arising from such structures is generally brighter than pigment-based colour. Here, we describe the main types of photonic structures found in plants and discuss the experimental approaches that can be used to analyse them. These experimental approaches allow identification of the physical mechanisms producing structural colours with a high degree of confidence. PMID:23883949

  20. Laser power beaming system analyses

    NASA Technical Reports Server (NTRS)

    Zeiders, Glenn W., Jr.

    1993-01-01

    The successful demonstration of the PAMELA adaptive optics hardware and the fabrication of the BTOS truss structure were identified by the program office as the two most critical elements of the NASA power beaming program, so it was these that received attention during this program. Much of the effort was expended in direct program support at MSFC, but detailed technical analyses of the AMP deterministic control scheme and the BTOS truss structure (both the JPL design and a spherical one) were prepared and are attached, and recommendations are given.

  1. Analysing photonic structures in plants.

    PubMed

    Vignolini, Silvia; Moyroud, Edwige; Glover, Beverley J; Steiner, Ullrich

    2013-10-06

    The outer layers of a range of plant tissues, including flower petals, leaves and fruits, exhibit an intriguing variation of microscopic structures. Some of these structures include ordered periodic multilayers and diffraction gratings that give rise to interesting optical appearances. The colour arising from such structures is generally brighter than pigment-based colour. Here, we describe the main types of photonic structures found in plants and discuss the experimental approaches that can be used to analyse them. These experimental approaches allow identification of the physical mechanisms producing structural colours with a high degree of confidence.

  2. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting.

  3. Dynamics of ultrasonic additive manufacturing.

    PubMed

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder.

  4. Dimensionless numbers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

    2017-02-01

    The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

  5. Latest European coelacanth shows Gondwanan affinities.

    PubMed

    Cavin, Lionel; Forey, Peter L; Buffetaut, Eric; Tong, Haiyan

    2005-06-22

    The last European fossil occurrence of a coelacanth is from the Mid-Cretaceous of the English Chalk (Turonian, 90 million years ago). Here, we report the discovery of a coelacanth from Late Cretaceous non-marine rocks in southern France. It consists of a left angular bone showing structures that imply close phylogenetic affinities with some extinct Mawsoniidae. The closest relatives are otherwise known from Cretaceous continental deposits of southern continents and suggest that the dispersal of freshwater organisms from Africa to Europe occurred in the Late Cretaceous.

  6. THOR Turbulence Electron Analyser: TEA

    NASA Astrophysics Data System (ADS)

    Fazakerley, Andrew; Moore, Tom; Owen, Chris; Pollock, Craig; Wicks, Rob; Samara, Marilia; Rae, Jonny; Hancock, Barry; Kataria, Dhiren; Rust, Duncan

    2016-04-01

    Turbulence Heating ObserveR (THOR) is the first mission ever flown in space dedicated to plasma turbulence. The Turbulence Electron Analyser (TEA) will measure the plasma electron populations in the mission's Regions of Interest. It will collect a 3D electron velocity distribution with cadences as short as 5 ms. The instrument will be capable of measuring energies up to 30 keV. TEA consists of multiple electrostatic analyser heads arranged so as to measure electrons arriving from look directions covering the full sky, i.e. 4 pi solid angle. The baseline concept is similar to the successful FPI-DES instrument currently operating on the MMS mission. TEA is intended to have a similar angular resolution, but a larger geometric factor. In comparison to earlier missions, TEA improves on the measurement cadence. For example, MMS FPI-DES routinely operates at 30 ms cadence. The objective of measuring distributions at rates as fast as 5 ms is driven by the mission's scientific requirements to resolve electron gyroscale size structures, where plasma heating and fluctuation dissipation is predicted to occur. TEA will therefore be capable of making measurements of the evolution of distribution functions across thin (a few km) current sheets travelling past the spacecraft at up to 600 km/s, of the Power Spectral Density of fluctuations of electron moments and of distributions fast enough to match frequencies with waves expected to be dissipating turbulence (e.g. with 100 Hz whistler waves).

  7. Show Me the Invisible: Visualizing Hidden Content

    PubMed Central

    Geymayer, Thomas; Steinberger, Markus; Lex, Alexander; Streit, Marc; Schmalstieg, Dieter

    2014-01-01

    Content on computer screens is often inaccessible to users because it is hidden, e.g., occluded by other windows, outside the viewport, or overlooked. In search tasks, the efficient retrieval of sought content is important. Current software, however, only provides limited support to visualize hidden occurrences and rarely supports search synchronization crossing application boundaries. To remedy this situation, we introduce two novel visualization methods to guide users to hidden content. Our first method generates awareness for occluded or out-of-viewport content using see-through visualization. For content that is either outside the screen’s viewport or for data sources not opened at all, our second method shows off-screen indicators and an on-demand smart preview. To reduce the chances of overlooking content, we use visual links, i.e., visible edges, to connect the visible content or the visible representations of the hidden content. We show the validity of our methods in a user study, which demonstrates that our technique enables a faster localization of hidden content compared to traditional search functionality and thereby assists users in information retrieval tasks. PMID:25325078

  8. Showing Emulsion Properties with Common Dairy Foods

    NASA Astrophysics Data System (ADS)

    Bravo-Diaz, Carlos; Gonzalez-Romero, Elisa

    1996-09-01

    Foods are mixtures of different chemical compounds, and the quality we sense (taste, texture, color, etc.) are all manifestations of its chemical properties. Some of them can be visualized with the aid of simple, safe and inexpensive experiments using dairy products that can be found in any kitchen and using almost exclusively kitchen utensils. In this paper we propose some of them related with food emulsions. Food emulsions cover an extremely wide area of daily-life applications such as milk, sauces, dressings and beverages. Experimentation with some culinary recipes to prepare them and the analyisis of the observed results is close to ideal subject for the introduction of chemical principles, allowing to discuss about the nature and composition of foods, the effects of additives, etc. At the same time it allows to get insights into the scientific reasons that underlie on the recipes (something that it is not usually found in most cookbooks). For example, when making an emulsion like mayonnaise, why the egg yolks and water are the first materials in the bowl , and the oil is added to them rather than in the other way around? How you can "rescue" separate emulsions (mayonnaise)? Which parameters affect emulsion stability? Since safety, in its broad sense, is the first requisite for any food, concerns about food exist throughout the world and the more we are aware of our everyday life, the more likely we will be to deal productively with the consequences. On the other hand, understanding what foods are and how cooking works destroys no delightful mystery of the art of cuisine, instead the mystery expands.

  9. Evaluation of the Technicon Axon analyser.

    PubMed

    Martínez, C; Márquez, M; Cortés, M; Mercé, J; Rodriguez, J; González, F

    1990-01-01

    An evaluation of the Technicon Axon analyser was carried out following the guidelines of the 'Sociedad Española de Química Clínica' and the European Committee for Clinical Laboratory Standards.A photometric study revealed acceptable results at both 340 nm and 404 nm. Inaccuracy and imprecision were lower at 404 nm than at 340 nm, although poor dispersion was found at both wavelengths, even at low absorbances. Drift was negligible, the imprecision of the sample pipette delivery system was greater for small sample volumes, the reagent pipette delivery system imprecision was acceptable and the sample diluting system study showed good precision and accuracy.Twelve analytes were studied for evaluation of the analyser under routine working conditions. Satisfactory results were obtained for within-run imprecision, while coefficients of variation for betweenrun imprecision were much greater than expected. Neither specimenrelated nor specimen-independent contamination was found in the carry-over study. For all analytes assayed, when comparing patient sample results with those obtained in a Hitachi 737 analyser, acceptable relative inaccuracy was observed.

  10. Analysing harmonic motions with an iPhone’s magnetometer

    NASA Astrophysics Data System (ADS)

    Yavuz, Ahmet; Kağan Temiz, Burak

    2016-05-01

    In this paper, we propose an experiment for analysing harmonic motion using an iPhone’s (or iPad’s) magnetometer. This experiment consists of the detection of magnetic field variations obtained from an iPhone’s magnetometer sensor. A graph of harmonic motion is directly displayed on the iPhone’s screen using the Sensor Kinetics application. Data from this application was analysed with Eureqa software to establish the equation of the harmonic motion. Analyses show that the use of an iPhone’s magnetometer to analyse harmonic motion is a practical and effective method for small oscillations and frequencies less than 15-20 Hz.

  11. Surveys show support for green 'activities'.

    PubMed

    Baillie, Jonathan

    2012-03-01

    Two independently conducted surveys on sustainability - one into the 'views and values' of NHS 'leaders', and the other questioning the public about the importance of the 'green agenda' in the NHS, and their opinions on how the service might most effectively reduce its carbon footprint, form the basis of Sustainability in the NHS: Health Check 2012, a new NHS Sustainable Development Unit (NHS SDU) publication. As HEJ editor Jonathan Baillie reports, the new document also presents updated data on the 'size' of the carbon footprint of the NHS in England, showing that, although good work by a number of Trusts in the past two years has seen healthcare-generated carbon emissions start to 'level off', the biggest contributors have been the current health service spending review, and the increased national availability of renewable energy.

  12. Star Shows It Has The Right Stuff

    NASA Astrophysics Data System (ADS)

    2004-01-01

    Astronomers have used an observation by NASA's Chandra X-ray Observatory to make the best case yet that a star can be engulfed by its companion star and survive. This discovery will help astronomers better understand how closely coupled stars, and perhaps even stars and planets, evolve when one of the stars expands enormously in its red giant phase. The binary star system known as V471 Tauri comprises a white dwarf star (the primary) in a close orbit -- one thirtieth of the distance between Mercury and the Sun -- with a normal Sun-like star (the secondary). Chandra's data showed that the hot upper atmosphere of the secondary star has a deficit of carbon atoms relative to nitrogen atoms. "This deficit of carbon atoms is the first clear observational evidence that the normal star was engulfed by its companion in the past," according to Jeremy Drake of the Smithsonian Astrophysical Observatory in Cambridge, MA, who coauthored an article on V471 in The Astrophysical Journal Letters with Marek Sarna of the N. Copernicus Astronomical Center in Poland. The white dwarf star was once a star several times as massive as the Sun. Nuclear fusion reactions in the core of such a star convert carbon into nitrogen over a period of about a billion years. When the fuel in the core of the star is exhausted, the core collapses, triggering more energetic nuclear reactions that cause the star to expand and transform into a red giant before eventually collapsing to become a white dwarf. The carbon-poor material in the core of the red giant is mixed with outer part of the star, so its atmosphere shows a deficit of carbon, as compared with Sun-like stars. The X-ray spectra of a red giant star (top panel) and a Sun-like star (bottom panel) show the large difference in the peaks due to carbon atoms in the two stars. Theoretical calculations indicate that a red giant in a binary system can completely envelop its companion star and dramatically affect its evolution. During this common envelope

  13. Microbiological and environmental issues in show caves.

    PubMed

    Saiz-Jimenez, Cesareo

    2012-07-01

    Cultural tourism expanded in the last half of the twentieth century, and the interest of visitors has come to include caves containing archaeological remains. Some show caves attracted mass tourism, and economical interests prevailed over conservation, which led to a deterioration of the subterranean environment and the rock art. The presence and the role of microorganisms in caves is a topic that is often ignored in cave management. Knowledge of the colonisation patterns, the dispersion mechanisms, and the effect on human health and, when present, over rock art paintings of these microorganisms is of the utmost importance. In this review the most recent advances in the study of microorganisms in caves are presented, together with the environmental implications of the findings.

  14. Mesenchymal stem cells show radioresistance in vivo.

    PubMed

    Singh, Sarvpreet; Kloss, Frank R; Brunauer, Regina; Schimke, Magdalena; Jamnig, Angelika; Greiderer-Kleinlercher, Brigitte; Klima, Günter; Rentenberger, Julia; Auberger, Thomas; Hächl, Oliver; Rasse, Michael; Gassner, Robert; Lepperdinger, Günter

    2012-04-01

    Irradiation impacts on the viability and differentiation capacity of tissue-borne mesenchymal stem cells (MSC), which play a pivotal role in bone regeneration. As a consequence of radiotherapy, bones may develop osteoradionecrosis. When irradiating human bone-derived MSC in vitro with increasing doses, the cells' self-renewal capabilities were greatly reduced. Mitotically stalled cells were still capable of differentiating into osteoblasts and pre-adipocytes. As a large animal model comparable to the clinical situation, pig mandibles were subjected to fractionized radiation of 2 χ 9 Gy within 1 week. This treatment mimics that of a standardized clinical treatment regimen of head and neck cancer patients irradiated 30 χ 2 Gy. In the pig model, fractures which had been irradiated, showed delayed osseous healing. When isolating MSC at different time points post-irradiation, no significant changes regarding proliferation capacity and osteogenic differentiation potential became apparent. Therefore, pig mandibles were irradiated with a single dose of either 9 or 18 Gy in vivo, and MSC were isolated immediately afterwards. No significant differences between the untreated and 9 Gy irradiated bone with respect to proliferation and osteogenic differentiation were unveiled. Yet, cells isolated from 18 Gy irradiated specimens exhibited a reduced osteogenic differentiation capacity, and during the first 2 weeks proliferation rates were greatly diminished. Thereafter, cells recovered and showed normal proliferation behaviour. These findings imply that MSC can effectively cope with irradiation up to high doses in vivo. This finding should thus be implemented in future therapeutic concepts to protect regenerating tissue from radiation consequences.

  15. Electricity show and related educational programming. Final report

    SciTech Connect

    1997-03-19

    The on-site version of Balance of Power reached a total audience of 21,331 between November 10, 1994 and January 31, 1996; in addition, the Physics on Wheels van offered exhibits and programs to an additional 30,000 students in the 1995-1996 school year. The program provided a groundbreaking new approach to informal science education, combining a dynamic demonstration with an intensely interactive game show. Between the on-site programming and the Physics on Wheels van programs, 51,331 students were impacted by the activities, exhibits and energy-conservation message of Balance of Power.

  16. Enantioselective Michael addition of water.

    PubMed

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-02-09

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry.

  17. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  18. [Total analysis of organic rubber additives].

    PubMed

    He, Wen-Xuan; Robert, Shanks; You, Ye-Ming

    2010-03-01

    In the present paper, after middle pressure chromatograph separation using both positive phase and reversed-phase conditions, the organic additives in ethylene-propylene rubber were identified by infrared spectrometer. At the same time, by using solid phase extraction column to maintain the main component-fuel oil in organic additves to avoid its interfering with minor compounds, other organic additves were separated and analysed by GC/Ms. In addition, the remaining active compound such as benzoyl peroxide was identified by CC/Ms, through analyzing acetone extract directly. Using the above mentioned techniques, soften agents (fuel oil, plant oil and phthalte), curing agent (benzoylperoxide), vulcanizing accelerators (2-mercaptobenzothiazole, ethyl thiuram and butyl thiuram), and antiagers (2, 6-Di-tert-butyl-4-methyl phenol and styrenated phenol) in ethylene-propylene rubber were identified. Although the technique was established in ethylene-propylene rubber system, it can be used in other rubber system.

  19. NMC stratospheric analyses during the 1987 Antarctic expedition

    NASA Technical Reports Server (NTRS)

    Gelman, Melvyn E.; Newman, Paul A.

    1988-01-01

    Stratospheric constant pressure analyses of geopotential height and temperature, produced as part of regular operations at the National Meteorological Center (NMC), were used by several participants of the Antarctic Ozone Expedition. A brief decription is given of the NMC stratospheric analyses and the data that are used to derive them. In addition, comparisons of the analysis values at the locations of radiosonde and aircraft data are presented to provide indications for assessing the representativeness of the NMC stratospheric analyses during the 1987 Antarctic winter-spring period.

  20. Shielding Analyses for VISION Beam Line at SNS

    SciTech Connect

    Popova, Irina; Gallmeier, Franz X

    2014-01-01

    Full-scale neutron and gamma transport analyses were performed to design shielding around the VISION beam line, instrument shielding enclosure, beam stop, secondary shutter including a temporary beam stop for the still closed neighboring beam line to meet requirement is to achieve dose rates below 0.25 mrem/h at 30 cm from the shielding surface. The beam stop and the temporary beam stop analyses were performed with the discrete ordinate code DORT additionally to Monte Carlo analyses with the MCNPX code. Comparison of the results is presented.

  1. Fouling control in seawater by on-line acid addition

    SciTech Connect

    Salvago, G.; Taccani, G.; Polimeni, R.; Fumagalli, G.; Picenoni, D.

    1996-11-01

    An experimental plant was set up containing once-through test lines supplied with seawater. The pH level of the seawater was maintained at 6.3 by the acids addition. Heat exchange monitoring equipment and channels exposing different metal specimens were installed on each of the lines. Observation by microscope and EDS analyses were carried out both on the specimen surfaces and on the cross section of the fouling after fracturing in liquid N{sub 2}. The results obtained show that: fouling must not be confused with its effects or simply with its biological components; acidifying seawater can prevent the resistance to heat exchange from increasing without impeding its biological activity. Observation by microscope of the fouling cross sections showed that in untreated seawater the foulings on stainless steel were composed of a continuous compact layer, covered by disorderly clusters. These compact layers were found to contain high quantities of corrosion products of the metals. Elements typical of corrosion products of ferrous materials (Fe, Mn) were also found on Pt, copper alloys and plastic materials. The addition of HCl or H{sub 2}SO{sub 4} to the seawater, to bring it to pH 6.3, reduces the amount of fouling adhering to the surfaces, prevents the development of the continuous layer containing iron and prevents significant increases in heat exchange resistance. The addition of CO{sub 2} can encourage the development of incoherent fibrous material with high Si content and low Fe content which is of little impediment to heat exchange. The addition of lactic acid can encourage both the abnormal development of biomass and the formation of several, separate, layers on stainless steel surfaces.

  2. VLA Shows "Boiling" in Atmosphere of Betelgeuse

    NASA Astrophysics Data System (ADS)

    1998-04-01

    A team of astronomers says that observations with the National Science Foundation's Very Large Array (VLA) radio telescope show that a neighboring bloated star has giant convective plumes propelling gas from its surface (photosphere) up into the star's atmosphere. This new information contradicts long-held ideas that such stellar atmospheres are more uniform, and may resolve questions about how the star's atmosphere attains its enormous size as well as how dust and gas is driven away from the star. Jeremy Lim of the Academia Sinica Institute of Astronomy & Astrophysics in Taiwan; Chris Carilli, Anthony Beasley, and Ralph Marson of the National Radio Astronomy Observatory (NRAO) in Socorro, NM; and Stephen White of the University of Maryland studied the red-supergiant star Betelgeuse, about 430 light-years away in the constellation Orion. They reported their findings in the April 9 issue of the scientific journal Nature. "These radio-telescope images confirm that Betelgeuse -- already more than 600 times larger than our Sun -- has a dense atmosphere that extends to many times larger still than the star itself," said Lim. "The highest-resolution image shows the star's atmosphere to have a remarkably complex structure." "To our surprise," added White, "the images also show that most of the gas in the atmosphere is only about as hot as that on the surface. Previously, all of it was thought to be very much hotter." The astronomers used the VLA to make images of Betelgeuse at a variety of radio frequencies. The series of radio observations measured the temperature of the star's atmosphere at different heights. Previous observations with the Hubble Space Telescope (HST) at ultraviolet wavelengths showed that the star's atmosphere contains very hot gas at about twice the surface temperature. The VLA images showed that there also is lower-temperature gas throughout the atmosphere. This gas is near the surface temperature at low heights and decreases in temperature

  3. 2010 oil spill: trajectory projections based on ensemble drifter analyses

    NASA Astrophysics Data System (ADS)

    Chang, Yu-Lin; Oey, Leo; Xu, Fang-Hua; Lu, Hung-Fu; Fujisaki, Ayumi

    2011-06-01

    An accurate method for long-term (weeks to months) projections of oil spill trajectories based on multi-year ensemble analyses of simulated surface and subsurface ( z = -800 m) drifters released at the northern Gulf of Mexico spill site is demonstrated during the 2010 oil spill. The simulation compares well with satellite images of the actual oil spill which show that the surface spread of oil was mainly confined to the northern shelf and slope of the Gulf of Mexico, with some (more limited) spreading over the north/northeastern face of the Loop Current, as well as northwestward toward the Louisiana-Texas shelf. At subsurface, the ensemble projection shows drifters spreading south/southwestward, and this tendency agrees well with ADCP current measurements near the spill site during the months of May-July, which also show southward mean currents. An additional model analysis during the spill period (Apr-Jul/2010) confirms the above ensemble projection. The 2010 analysis confirms that the reason for the surface oil spread to be predominantly confined to the northern Gulf shelf and slope is because the 2010 wind was more southerly compared to climatology and also because a cyclone existed north of the Loop Current which moreover was positioned to the south of the spilled site.

  4. Analyses to improve operational flexibility

    SciTech Connect

    Trikouros, N.G.

    1986-01-01

    Operational flexibility is greatly enhanced if the technical bases for plant limits and design margins are fully understood, and the analyses necessary to evaluate the effect of plant modifications or changes in operating modes on these parameters can be performed as required. If a condition should arise that might jeopardize a plant limit or reduce operational flexibility, it would be necessary to understand the basis for the limit or the specific condition limiting operational flexibility and be capable of performing a reanalysis to either demonstrate that the limit will not be violated or to change the limit. This paper provides examples of GPU Nuclear efforts in this regard. Examples of Oyster Creek and Three Mile Island operating experiences are discussed.

  5. Chemical analyses of provided samples

    NASA Technical Reports Server (NTRS)

    Becker, Christopher H.

    1993-01-01

    Two batches of samples were received and chemical analysis was performed of the surface and near surface regions of the samples by the surface analysis by laser ionization (SALI) method. The samples included four one-inch optics and several paint samples. The analyses emphasized surface contamination or modification. In these studies, pulsed sputtering by 7 keV Ar+ and primarily single-photon ionization (SPI) by coherent 118 nm radiation (at approximately 5 x 10(exp 5) W/cm(sup 2) were used. For two of the samples, also multiphoton ionization (MPI) at 266 nm (approximately 5 x 10(exp 11) W/cm(sup 2) was used. Most notable among the results was the silicone contamination on Mg2 mirror 28-92, and that the Long Duration Exposure Facility (LDEF) paint sample had been enriched in K and Na and depleted in Zn, Si, B, and organic compounds relative to the control paint.

  6. Geomorphic analyses from space imagery

    NASA Technical Reports Server (NTRS)

    Morisawa, M.

    1985-01-01

    One of the most obvious applications of space imagery to geomorphological analyses is in the study of drainage patterns and channel networks. LANDSAT, high altitude photography and other types of remote sensing imagery are excellent for depicting stream networks on a regional scale because of their broad coverage in a single image. They offer a valuable tool for comparing and analyzing drainage patterns and channel networks all over the world. Three aspects considered in this geomorphological study are: (1) the origin, evolution and rates of development of drainage systems; (2) the topological studies of network and channel arrangements; and (3) the adjustment of streams to tectonic events and geologic structure (i.e., the mode and rate of adjustment).

  7. Dolphin shows and interaction programs: benefits for conservation education?

    PubMed

    Miller, L J; Zeigler-Hill, V; Mellen, J; Koeppel, J; Greer, T; Kuczaj, S

    2013-01-01

    Dolphin shows and dolphin interaction programs are two types of education programs within zoological institutions used to educate visitors about dolphins and the marine environment. The current study examined the short- and long-term effects of these programs on visitors' conservation-related knowledge, attitude, and behavior. Participants of both dolphin shows and interaction programs demonstrated a significant short-term increase in knowledge, attitudes, and behavioral intentions. Three months following the experience, participants of both dolphin shows and interaction programs retained the knowledge learned during their experience and reported engaging in more conservation-related behaviors. Additionally, the number of dolphin shows attended in the past was a significant predictor of recent conservation-related behavior suggesting that repetition of these types of experiences may be important in inspiring people to conservation action. These results suggest that both dolphin shows and dolphin interaction programs can be an important part of a conservation education program for visitors of zoological facilities.

  8. Isotopic signatures by bulk analyses

    SciTech Connect

    Efurd, D.W.; Rokop, D.J.

    1997-12-01

    Los Alamos National Laboratory has developed a series of measurement techniques for identification of nuclear signatures by analyzing bulk samples. Two specific applications for isotopic fingerprinting to identify the origin of anthropogenic radioactivity in bulk samples are presented. The first example is the analyses of environmental samples collected in the US Arctic to determine the impact of dumping of radionuclides in this polar region. Analyses of sediment and biota samples indicate that for the areas sampled the anthropogenic radionuclide content of sediments was predominantly the result of the deposition of global fallout. The anthropogenic radionuclide concentrations in fish, birds and mammals were very low. It can be surmised that marine food chains are presently not significantly affected. The second example is isotopic fingerprinting of water and sediment samples from the Rocky Flats Facility (RFP). The largest source of anthropogenic radioactivity presently affecting surface-waters at RFP is the sediments that are currently residing in the holding ponds. One gram of sediment from a holding pond contains approximately 50 times more plutonium than 1 liter of water from the pond. Essentially 100% of the uranium in Ponds A-1 and A-2 originated as depleted uranium. The largest source of radioactivity in the terminal Ponds A-4, B-5 and C-2 was naturally occurring uranium and its decay product radium. The uranium concentrations in the waters collected from the terminal ponds contained 0.05% or less of the interim standard calculated derived concentration guide for uranium in waters available to the public. All of the radioactivity observed in soil, sediment and water samples collected at RFP was naturally occurring, the result of processes at RFP or the result of global fallout. No extraneous anthropogenic alpha, beta or gamma activities were detected. The plutonium concentrations in Pond C-2 appear to vary seasonally.

  9. NASA GIBS Use in Live Planetarium Shows

    NASA Astrophysics Data System (ADS)

    Emmart, C. B.

    2015-12-01

    The American Museum of Natural History's Hayden Planetarium was rebuilt in year 2000 as an immersive theater for scientific data visualization to show the universe in context to our planet. Specific astrophysical movie productions provide the main daily programming, but interactive control software, developed at AMNH allows immersive presentation within a data aggregation of astronomical catalogs called the Digital Universe 3D Atlas. Since 2006, WMS globe browsing capabilities have been built into a software development collaboration with Sweden's Linkoping University (LiU). The resulting Uniview software, now a product of the company SCISS, is operated by about fifty planetariums around that world with ability to network amongst the sites for global presentations. Public presentation of NASA GIBS has allowed authoritative narratives to be presented within the range of data available in context to other sources such as Science on a Sphere, NASA Earth Observatory and Google Earth KML resources. Specifically, the NOAA supported World Views Network conducted a series of presentations across the US that focused on local ecological issues that could then be expanded in the course of presentation to national and global scales of examination. NASA support of for GIBS resources in an easy access multi scale streaming format like WMS has tremendously enabled particularly facile presentations of global monitoring like never before. Global networking of theaters for distributed presentations broadens out the potential for impact of this medium. Archiving and refinement of these presentations has already begun to inform new types of documentary productions that examine pertinent, global interdependency topics.

  10. Tetrahydrobiopterin shows chaperone activity for tyrosine hydroxylase.

    PubMed

    Thöny, Beat; Calvo, Ana C; Scherer, Tanja; Svebak, Randi M; Haavik, Jan; Blau, Nenad; Martinez, Aurora

    2008-07-01

    Tyrosine hydroxylase (TH) is the rate-limiting enzyme in the synthesis of catecholamine neurotransmitters. Primary inherited defects in TH have been associated with l-DOPA responsive and non-responsive dystonia and infantile parkinsonism. In this study, we show that both the cofactor (6R)-l-erythro-5,6,7,8-tetrahydrobiopterin (BH(4)) and the feedback inhibitor and catecholamine product dopamine increase the kinetic stability of human TH isoform 1 in vitro. Activity measurements and synthesis of the enzyme by in vitro transcription-translation revealed a complex regulation by the cofactor including both enzyme inactivation and conformational stabilization. Oral BH(4) supplementation to mice increased TH activity and protein levels in brain extracts, while the Th-mRNA level was not affected. All together our results indicate that the molecular mechanisms for the stabilization are a primary folding-aid effect of BH(4) and a secondary effect by increased synthesis and binding of catecholamine ligands. Our results also establish that orally administered BH(4) crosses the blood-brain barrier and therapeutic regimes based on BH(4) supplementation should thus consider the effect on TH. Furthermore, BH(4) supplementation arises as a putative therapeutic agent in the treatment of brain disorders associated with TH misfolding, such as for the human TH isoform 1 mutation L205P.

  11. First K2 mutiplanatary system showing TTVs

    NASA Astrophysics Data System (ADS)

    Barros, Susana C. C.

    2015-08-01

    In traditional transit timing variations (TTVs) analysis of multi-planetary systems, the individual TTVs are first derived from transit fitting and later modeled using n-body dynamic simulations to constrain planetary masses.I will show that fitting simultaneously the transit light curves with the system dynamics (photo-dynamical model) increases the precision of the TTV measurements and helps constrain the system architecture. I will exemplify the advantages of applying this photo-dynamical model to a multi-planetary system found in K2 data very close to 3:2 mean motion resonance. In this case the period of the larger TTV variations (libration period) is much longer (~1.5 years) than the duration of the K2 observations (~80 days). However, our method allows to detect the short period TTVs produced by the orbital conjunctions between the planets that in turn permits to uniquely characterize the system. Therefore, our method can be used to constrain the masses of near-resonant systems even when the full libration curve is not observed and hence will help understanding evolution of these interesting systems.

  12. Precise Chemical Analyses of Planetary Surfaces

    NASA Technical Reports Server (NTRS)

    Kring, David; Schweitzer, Jeffrey; Meyer, Charles; Trombka, Jacob; Freund, Friedemann; Economou, Thanasis; Yen, Albert; Kim, Soon Sam; Treiman, Allan H.; Blake, David; Lisse, Carey

    1996-01-01

    We identify the chemical elements and element ratios that should be analyzed to address many of the issues identified by the Committee on Planetary and Lunar Exploration (COMPLEX). We determined that most of these issues require two sensitive instruments to analyze the necessary complement of elements. In addition, it is useful in many cases to use one instrument to analyze the outermost planetary surface (e.g. to determine weathering effects), while a second is used to analyze a subsurface volume of material (e.g., to determine the composition of unaltered planetary surface material). This dual approach to chemical analyses will also facilitate the calibration of orbital and/or Earth-based spectral observations of the planetary body. We determined that in many cases the scientific issues defined by COMPLEX can only be fully addressed with combined packages of instruments that would supplement the chemical data with mineralogic or visual information.

  13. Bioinformatics tools for analysing viral genomic data.

    PubMed

    Orton, R J; Gu, Q; Hughes, J; Maabar, M; Modha, S; Vattipally, S B; Wilkie, G S; Davison, A J

    2016-04-01

    The field of viral genomics and bioinformatics is experiencing a strong resurgence due to high-throughput sequencing (HTS) technology, which enables the rapid and cost-effective sequencing and subsequent assembly of large numbers of viral genomes. In addition, the unprecedented power of HTS technologies has enabled the analysis of intra-host viral diversity and quasispecies dynamics in relation to important biological questions on viral transmission, vaccine resistance and host jumping. HTS also enables the rapid identification of both known and potentially new viruses from field and clinical samples, thus adding new tools to the fields of viral discovery and metagenomics. Bioinformatics has been central to the rise of HTS applications because new algorithms and software tools are continually needed to process and analyse the large, complex datasets generated in this rapidly evolving area. In this paper, the authors give a brief overview of the main bioinformatics tools available for viral genomic research, with a particular emphasis on HTS technologies and their main applications. They summarise the major steps in various HTS analyses, starting with quality control of raw reads and encompassing activities ranging from consensus and de novo genome assembly to variant calling and metagenomics, as well as RNA sequencing.

  14. Human DNA methylomes of neurodegenerative diseases show common epigenomic patterns.

    PubMed

    Sanchez-Mut, J V; Heyn, H; Vidal, E; Moran, S; Sayols, S; Delgado-Morales, R; Schultz, M D; Ansoleaga, B; Garcia-Esparcia, P; Pons-Espinal, M; de Lagran, M M; Dopazo, J; Rabano, A; Avila, J; Dierssen, M; Lott, I; Ferrer, I; Ecker, J R; Esteller, M

    2016-01-19

    Different neurodegenerative disorders often show similar lesions, such as the presence of amyloid plaques, TAU-neurotangles and synuclein inclusions. The genetically inherited forms are rare, so we wondered whether shared epigenetic aberrations, such as those affecting DNA methylation, might also exist. The studied samples were gray matter samples from the prefrontal cortex of control and neurodegenerative disease-associated cases. We performed the DNA methylation analyses of Alzheimer's disease, dementia with Lewy bodies, Parkinson's disease and Alzheimer-like neurodegenerative profile associated with Down's syndrome samples. The DNA methylation landscapes obtained show that neurodegenerative diseases share similar aberrant CpG methylation shifts targeting a defined gene set. Our findings suggest that neurodegenerative disorders might have similar pathogenetic mechanisms that subsequently evolve into different clinical entities. The identified aberrant DNA methylation changes can be used as biomarkers of the disorders and as potential new targets for the development of new therapies.

  15. Human DNA methylomes of neurodegenerative diseases show common epigenomic patterns

    PubMed Central

    Sanchez-Mut, J V; Heyn, H; Vidal, E; Moran, S; Sayols, S; Delgado-Morales, R; Schultz, M D; Ansoleaga, B; Garcia-Esparcia, P; Pons-Espinal, M; de Lagran, M M; Dopazo, J; Rabano, A; Avila, J; Dierssen, M; Lott, I; Ferrer, I; Ecker, J R; Esteller, M

    2016-01-01

    Different neurodegenerative disorders often show similar lesions, such as the presence of amyloid plaques, TAU-neurotangles and synuclein inclusions. The genetically inherited forms are rare, so we wondered whether shared epigenetic aberrations, such as those affecting DNA methylation, might also exist. The studied samples were gray matter samples from the prefrontal cortex of control and neurodegenerative disease-associated cases. We performed the DNA methylation analyses of Alzheimer's disease, dementia with Lewy bodies, Parkinson's disease and Alzheimer-like neurodegenerative profile associated with Down's syndrome samples. The DNA methylation landscapes obtained show that neurodegenerative diseases share similar aberrant CpG methylation shifts targeting a defined gene set. Our findings suggest that neurodegenerative disorders might have similar pathogenetic mechanisms that subsequently evolve into different clinical entities. The identified aberrant DNA methylation changes can be used as biomarkers of the disorders and as potential new targets for the development of new therapies. PMID:26784972

  16. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  17. Additive Effects on Asymmetric Catalysis.

    PubMed

    Hong, Liang; Sun, Wangsheng; Yang, Dongxu; Li, Guofeng; Wang, Rui

    2016-03-23

    This review highlights a number of additives that can be used to make asymmetric reactions perfect. Without changing other reaction conditions, simply adding additives can lead to improved asymmetric catalysis, such as reduced reaction time, improved yield, or/and increased selectivity.

  18. Anaerobic sludge digestion with a biocatalytic additive

    SciTech Connect

    Ghosh, S.; Henry, M.P.; Fedde, P.A.

    1982-01-01

    The objective of this research was to evaluate the effects of a lactobacillus additive an anaerobic sludge digestion under normal, variable, and overload operating conditions. The additive was a whey fermentation product of an acid-tolerant strain of Lactobacillus acidophilus fortified with CaCO/sub 3/, (NH/sub 4/)/sub 2/HPO/sub 4/, ferrous lactate, and lactic acid. The lactobacillus additive is multifunctional in nature and provides growth factors, metabolic intermediates, and enzymes needed for substrate degradation and cellular synthesis. The experimental work consisted of several pairs of parallel mesophilic (35/sup 0/C) digestion runs (control and test) conducted in five experimental phases. Baseline runs without the additive showed that the two experimental digesters had the same methane content, gas production rate (GPR), and ethane yield. The effect of the additive was to increase methane yield and GPR by about 5% (which was statistically significant) during digester operation at a loading rate (LR) of 3.2 kg VS/m/sup 3/-day and a hydraulic retention time (HRT) of 14 days. Data collected from the various experimental phases showed that the biochemical additive increased methane yield, gas production rate, and VS reduction, and decreased volatile acids accumulation. In addition, it enhanced digester buffer capacity and improved the fertilizer value and dewatering characteristics of the digested residue.

  19. Influence of hydroxypropylmethylcellulose addition and homogenization conditions on properties and ageing of corn starch based films.

    PubMed

    Jiménez, Alberto; Fabra, María José; Talens, Pau; Chiralt, Amparo

    2012-06-20

    Edible films based on corn starch, hydroxypropyl methylcellulose (HPMC) and their mixtures were prepared by using two different procedures to homogenize the film forming dispersions (rotor-stator and rotor-stator plus microfluidizer). The influence of both HPMC-starch ratio and the homogenization method on the structural, optical, tensile and barrier properties of the films was analysed. The ageing of the films was also studied by characterizing them after 5 weeks' storage. Starch re-crystallization in newly prepared and stored films was analysed by means of X-ray diffraction. HPMC-corn starch films showed phase separation of polymers, which was enhanced when microfluidization was applied to the film forming dispersion. Nevertheless, HPMC addition inhibited starch re-crystallization during storage, giving rise to more flexible films at the end of the period. Water barrier properties of starch films were hardly affected by the addition of HPMC, although oxygen permeability increased due to its poorer oxygen barrier properties.

  20. DAST in Flight Showing Diverging Wingtip Oscillations

    NASA Technical Reports Server (NTRS)

    1980-01-01

    normal stiffness. This was done because stiffness requires structural weight but ensures freedom from flutter-an uncontrolled, divergent oscillation of the structure, driven by aerodynamic forces and resulting in structural failure. The program used refined theoretical tools to predict at what speed flutter would occur. It then designed a high-response control system to counteract the motion and permit a much lighter wing structure. The wing had, in effect, 'electronic stiffness.' Flight research with this concept was extremely hazardous because an error in either the flutter prediction or control system implementation would result in wing structural failure and the loss of the vehicle. Because of this, flight demonstration of a sub-scale vehicle made sense from the standpoint of both safety and cost. The program anticipated structural failure during the course of the flight research. The Firebee II was a supersonic drone selected as the DAST testbed because its wing could be easily replaced, it used only tail-mounted control surfaces, and it was available as surplus from the U. S. Air Force. It was capable of 5-g turns (that is, turns producing acceleration equal to 5 times that of gravity). Langley outfitted a drone with an aeroelastic, supercritical research wing suitable for a Mach 0.98 cruise transport with a predicted flutter speed of Mach 0.95 at an altitude of 25,000 feet. Dryden and Langley, in conjunction with Boeing, designed and fabricated a digital flutter suppression system (FSS). Dryden developed an RPRV (remotely piloted research vehicle) flight control system; integrated the wing, FSS, and vehicle systems; and conducted the flight program. In addition to a digital flight control system and aeroelastic wings, each DAST drone had research equipment mounted in its nose and a mid-air retrieval system in its tail. The drones were originally launched from the NASA B-52 bomber and later from a DC-130. The DAST vehicle's flight was monitored from the sky by an F

  1. AD-1 multiple exposure showing wing sweep

    NASA Technical Reports Server (NTRS)

    1980-01-01

    This photograph is a multiple exposure showing the AD-1 aircraft with its wing swept at different angles between zero and 60 degrees. The Ames-Dryden-1 (AD-1) aircraft was designed to investigate the concept of an oblique (pivoting) wing. The wing could be rotated on its center pivot, so that it could be set at its most efficient angle for the speed at which the aircraft was flying. NASA Ames Research Center Aeronautical Engineer Robert T. Jones conceived the idea of an oblique wing. His wind tunnel studies at Ames (Moffett Field, CA) indicated that an oblique wing design on a supersonic transport might achieve twice the fuel economy of an aircraft with conventional wings. The oblique wing on the AD-1 pivoted about the fuselage, remaining perpendicular to it during slow flight and rotating to angles of up to 60 degrees as aircraft speed increased. Analytical and wind tunnel studiesthat Jones conducted at Ames indicated that a transport-sized oblique-wing aircraft flying at speeds of up to Mach 1.4 (1.4 times the speed of sound) would have substantially better aerodynamic performance than aircraft with conventional wings. The AD-1 structure allowed the project to complete all of its technical objectives. The type of low-speed, low-cost vehicle - as expected - exhibited aeroelastic and pitch-roll-coupling effects that contributed to poor handling at sweep angles above 45 degrees. The fiberglass structure limited the wing stiffness that would have improved the handling qualities. Thus, after completion of the AD-1 project, there was still a need for a transonic oblique-wing research aircraft to assess the effects of compressibility, evaluate a more representative structure, and analyze flight performance at transonic speeds (those on either side of the speed of sound). The aircraft was delivered to the Dryden Flight Research Center, Edwards, CA, in March 1979 and its first flight was on December 21, 1979. Piloting the aircraft on that flight, as well as on its last

  2. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  3. SPERTI plot plan, showing reactor and control areas after 1956 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SPERT-I plot plan, showing reactor and control areas after 1956 addition to PER-601. Includes reactor-area buildings PER-605, -606, and -607; Terminal Building (PER-604), and control-area buildings PER-601, -602, -603 along with associated parking areas and fencing. Vicinity map shows relationship of SPERT-I to SPERT-II, SPERT-III, central facilities area (at west end of E. Portland Avenue) and Highways 20 and 26. Idaho Operations Office PER-103-IDO-1. Date: December 1955. INEEL index no. 760-0103-396-109112 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

  4. Photovoltaics: Life-cycle Analyses

    SciTech Connect

    Fthenakis V. M.; Kim, H.C.

    2009-10-02

    Life-cycle analysis is an invaluable tool for investigating the environmental profile of a product or technology from cradle to grave. Such life-cycle analyses of energy technologies are essential, especially as material and energy flows are often interwoven, and divergent emissions into the environment may occur at different life-cycle-stages. This approach is well exemplified by our description of material and energy flows in four commercial PV technologies, i.e., mono-crystalline silicon, multi-crystalline silicon, ribbon-silicon, and cadmium telluride. The same life-cycle approach is applied to the balance of system that supports flat, fixed PV modules during operation. We also discuss the life-cycle environmental metrics for a concentration PV system with a tracker and lenses to capture more sunlight per cell area than the flat, fixed system but requires large auxiliary components. Select life-cycle risk indicators for PV, i.e., fatalities, injures, and maximum consequences are evaluated in a comparative context with other electricity-generation pathways.

  5. Helicopter tail rotor noise analyses

    NASA Technical Reports Server (NTRS)

    George, A. R.; Chou, S. T.

    1986-01-01

    A study was made of helicopter tail rotor noise, particularly that due to interactions with the main rotor tip vortices, and with the fuselage separation mean wake. The tail rotor blade-main rotor tip vortex interaction is modelled as an airfoil of infinite span cutting through a moving vortex. The vortex and the geometry information required by the analyses are obtained through a free wake geometry analysis of the main rotor. The acoustic pressure-time histories for the tail rotor blade-vortex interactions are then calculated. These acoustic results are compared to tail rotor loading and thickness noise, and are found to be significant to the overall tail rotor noise generation. Under most helicopter operating conditions, large acoustic pressure fluctuations can be generated due to a series of skewed main rotor tip vortices passing through the tail rotor disk. The noise generation depends strongly upon the helicopter operating conditions and the location of the tail rotor relative to the main rotor.

  6. Proteins analysed as virtual knots

    NASA Astrophysics Data System (ADS)

    Alexander, Keith; Taylor, Alexander J.; Dennis, Mark R.

    2017-02-01

    Long, flexible physical filaments are naturally tangled and knotted, from macroscopic string down to long-chain molecules. The existence of knotting in a filament naturally affects its configuration and properties, and may be very stable or disappear rapidly under manipulation and interaction. Knotting has been previously identified in protein backbone chains, for which these mechanical constraints are of fundamental importance to their molecular functionality, despite their being open curves in which the knots are not mathematically well defined; knotting can only be identified by closing the termini of the chain somehow. We introduce a new method for resolving knotting in open curves using virtual knots, which are a wider class of topological objects that do not require a classical closure and so naturally capture the topological ambiguity inherent in open curves. We describe the results of analysing proteins in the Protein Data Bank by this new scheme, recovering and extending previous knotting results, and identifying topological interest in some new cases. The statistics of virtual knots in protein chains are compared with those of open random walks and Hamiltonian subchains on cubic lattices, identifying a regime of open curves in which the virtual knotting description is likely to be important.

  7. Network analyses in systems pharmacology

    PubMed Central

    Berger, Seth I.; Iyengar, Ravi

    2009-01-01

    Systems pharmacology is an emerging area of pharmacology which utilizes network analysis of drug action as one of its approaches. By considering drug actions and side effects in the context of the regulatory networks within which the drug targets and disease gene products function, network analysis promises to greatly increase our knowledge of the mechanisms underlying the multiple actions of drugs. Systems pharmacology can provide new approaches for drug discovery for complex diseases. The integrated approach used in systems pharmacology can allow for drug action to be considered in the context of the whole genome. Network-based studies are becoming an increasingly important tool in understanding the relationships between drug action and disease susceptibility genes. This review discusses how analysis of biological networks has contributed to the genesis of systems pharmacology and how these studies have improved global understanding of drug targets, suggested new targets and approaches for therapeutics, and provided a deeper understanding of the effects of drugs. Taken together, these types of analyses can lead to new therapeutic options while improving the safety and efficacy of existing medications. Contact: ravi.iyengar@mssm.edu PMID:19648136

  8. Proteins analysed as virtual knots

    PubMed Central

    Alexander, Keith; Taylor, Alexander J.; Dennis, Mark R.

    2017-01-01

    Long, flexible physical filaments are naturally tangled and knotted, from macroscopic string down to long-chain molecules. The existence of knotting in a filament naturally affects its configuration and properties, and may be very stable or disappear rapidly under manipulation and interaction. Knotting has been previously identified in protein backbone chains, for which these mechanical constraints are of fundamental importance to their molecular functionality, despite their being open curves in which the knots are not mathematically well defined; knotting can only be identified by closing the termini of the chain somehow. We introduce a new method for resolving knotting in open curves using virtual knots, which are a wider class of topological objects that do not require a classical closure and so naturally capture the topological ambiguity inherent in open curves. We describe the results of analysing proteins in the Protein Data Bank by this new scheme, recovering and extending previous knotting results, and identifying topological interest in some new cases. The statistics of virtual knots in protein chains are compared with those of open random walks and Hamiltonian subchains on cubic lattices, identifying a regime of open curves in which the virtual knotting description is likely to be important. PMID:28205562

  9. Adverse reactions to drug additives.

    PubMed

    Simon, R A

    1984-10-01

    There is a long list of additives used by the pharmaceutical industry. Most of the agents used have not been implicated in hypersensitivity reactions. Among those that have, only reactions to parabens and sulfites have been well established. Parabens have been shown to be responsible for rare immunoglobulin E-mediated reactions that occur after the use of local anesthetics. Sulfites, which are present in many drugs, including agents commonly used to treat asthma, have been shown to provoke severe asthmatic attacks in sensitive individuals. Recent studies indicate that additives do not play a significant role in "hyperactivity." The role of additives in urticaria is not well established and therefore the incidence of adverse reactions in this patient population is simply not known. In double-blind, placebo-controlled studies, reactions to tartrazine or additives other than sulfites, if they occur at all, are indeed quite rare for the asthmatic population, even for the aspirin-sensitive subpopulation.

  10. Radiation Therapy: Additional Treatment Options

    MedlinePlus

    ... SNIPEND SNIPSTART Find A Radiation Oncologist SNIPEND Additional Treatment Options SNIPSTART A A SNIPEND Chemotherapy Medicines prescribed ... such as antibodies, to fight cancer. Novel Targeted Therapies Cancer doctors now know much more about how ...

  11. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  12. Food additives and preschool children.

    PubMed

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  13. Influence of bio-additives on combustion of liquid fuels

    NASA Astrophysics Data System (ADS)

    Patsch, Marek; Durčanský, Peter

    2016-06-01

    In this contribution there are analyses of the course of the pressure curves, which were measured in the diesel engine MD UR IV, which is often used in cogeneration units. The results of the analyses confront the properties and quality of fuels. The measuring was realized with a constant rotation speed of the engine and by using different fuels. The fuels were pure diesel fuels and diesel fuel with bio-additives of hydrogenate RO (rape oil), FAME, and bioethanol.

  14. Automated nutrient analyses in seawater

    SciTech Connect

    Whitledge, T.E.; Malloy, S.C.; Patton, C.J.; Wirick, C.D.

    1981-02-01

    This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The three appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)

  15. Time dependent patient no-show predictive modelling development.

    PubMed

    Huang, Yu-Li; Hanauer, David A

    2016-05-09

    Purpose - The purpose of this paper is to develop evident-based predictive no-show models considering patients' each past appointment status, a time-dependent component, as an independent predictor to improve predictability. Design/methodology/approach - A ten-year retrospective data set was extracted from a pediatric clinic. It consisted of 7,291 distinct patients who had at least two visits along with their appointment characteristics, patient demographics, and insurance information. Logistic regression was adopted to develop no-show models using two-thirds of the data for training and the remaining data for validation. The no-show threshold was then determined based on minimizing the misclassification of show/no-show assignments. There were a total of 26 predictive model developed based on the number of available past appointments. Simulation was employed to test the effective of each model on costs of patient wait time, physician idle time, and overtime. Findings - The results demonstrated the misclassification rate and the area under the curve of the receiver operating characteristic gradually improved as more appointment history was included until around the 20th predictive model. The overbooking method with no-show predictive models suggested incorporating up to the 16th model and outperformed other overbooking methods by as much as 9.4 per cent in the cost per patient while allowing two additional patients in a clinic day. Research limitations/implications - The challenge now is to actually implement the no-show predictive model systematically to further demonstrate its robustness and simplicity in various scheduling systems. Originality/value - This paper provides examples of how to build the no-show predictive models with time-dependent components to improve the overbooking policy. Accurately identifying scheduled patients' show/no-show status allows clinics to proactively schedule patients to reduce the negative impact of patient no-shows.

  16. Mathematical and Numerical Analyses of Peridynamics for Multiscale Materials Modeling

    SciTech Connect

    Du, Qiang

    2014-11-12

    generation atomistic-to-continuum multiscale simulations. In addition, a rigorous studyof nite element discretizations of peridynamics will be considered. Using the fact that peridynamics is spatially derivative free, we will also characterize the space of admissible peridynamic solutions and carry out systematic analyses of the models, in particular rigorously showing how peridynamics encompasses fracture and other failure phenomena. Additional aspects of the project include the mathematical and numerical analysis of peridynamics applied to stochastic peridynamics models. In summary, the project will make feasible mathematically consistent multiscale models for the analysis and design of advanced materials.

  17. Active mineral additives of sapropel ashes

    NASA Astrophysics Data System (ADS)

    Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

    2015-01-01

    The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

  18. FY01 Supplemental Science and Performance Analyses, Volume 1: Scientific Bases and Analyses, Rev 00

    SciTech Connect

    David Dobson

    2001-06-30

    The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S&ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S&ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S&ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23 013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained in this FY01 Supplemental Science and Performance Analyses: Vol. 1, Scientific Bases and Analyses; and FY01 Supplemental Science and Performance Analyses: Vol. 2, Performance Analyses (McNeish 2001 [DIRS 155023]) (collectively referred to as the SSPA) and (2) a preliminary evaluation of the Yucca Mountain site's preclosure and postclosure performance against the DOE's proposed site suitability guidelines (10 CFR Part 963 [64 FR 67054] [DIRS 124754]). By making the large amount of information developed on Yucca Mountain available in stages, the DOE intends to provide the public and interested parties with time to review the available materials and to formulate and submit

  19. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting.

  20. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  1. "Analysing Genre: Language Use in Professional Settings." A Review.

    ERIC Educational Resources Information Center

    Drury, Helen

    1995-01-01

    "Analysing Genre," by Vijay K. Bhatia, is a timely addition to the literature on genre analysis in English for specific purposes. It is divided into three parts: the first provides theoretical background; the second explains how genre analysis works in different academic and professional settings; and the third exemplifies the…

  2. Kinematic top analyses at CDF

    SciTech Connect

    Cobal-Grassman, M.; CDF Collaboration

    1996-01-01

    We present an update of the top quark analysis using kinematic techniques in {rho}{ovr string {rho}} collisions at {radical}s = 1.8 TeV with the Collider Detector at Fermilab (CDF). We reported before on a study which used 19.3 pb{sup -1} of data from the 1992-93 collider run, but now we use a larger data sample of 67 pb{sup -1}. First, we analyze the total transverse energy of the hard collision in W+{ge}3 jet events, showing the likely presence of a t{ovr string t} component in the event sample. Next, we compare in more detail the kinematic structure of W+{ge}3 jet events with expectations for top pair production and with background processes, predominantly direct W+ jet production. We again find W+{ge}3 jet events which cannot be explained in terms of background, but show kinematic features as expected from top. These events also show evidence for beauty quarks. The findings confirm the observation of top events made earlier in the data of the 1992-93 collider run.

  3. Thermal analyses of in vitro low frequency sonophoresis.

    PubMed

    Peng, Han-Min; Zhu, Pan-Cheng; Chen, Zhi-Jun

    2017-03-01

    As a type of transdermal drug delivery method, low frequency sonophoresis (LFS) has been investigated during the last twenty years and is currently being attempted in a clinical setting. However, the safety of low frequency ultrasound on humans has not been completely guaranteed with high-intensity ultrasound. Thermal damage, one of the challenges in the LFS process, e.g., burns, epidermal detachment and necrosis of tissues, hinders its widespread applications. To predict and impede the overheating problems in LFS, an acoustic-flow-thermal finite element method (FEM) based on COMSOL Multiphysics software is proposed in this paper to achieve thermal analyses. The temperature distribution and its rising curves in in vitro LFS are obtained by the FEM method and experimental measurements. Both simulated and experimental maximum temperatures are larger than the safety value (e.g., 42°C on human tissues) when the driving voltage is higher than 40V (5.5W input electric power), which proves that the overheating problem really exists in high-intensity ultrasound. Furthermore, the results show that the calculated temperature rising curves in in vitro LFS correspond to the experimental results, proving the effectiveness of this FEM method. In addition, several potential thermal influence factors have been studied, including a duty ratio and amplitude of the driving voltage, and liquid height in the donor, which may be helpful in restraining the temperature increase to limit thermal damage. According to the calculated and experimental results, the former two factors are sensitive to the rise in temperature, but a small scale of liquid volume increase can enhance the permeation of Calcein without obvious temperature change. Hence, the above factors can be synthetically utilized to restrain the rise in temperature with little sacrifice of permeation ability. So this acoustic-flow-thermal FEM method could be applied to an optimized LFS system design and simulating the thermal

  4. Molecular Microbial Analyses of the Mars Exploration Rovers Assembly Facility

    NASA Technical Reports Server (NTRS)

    Venkateswaran, Kasthuri; LaDuc, Myron T.; Newcombe, David; Kempf, Michael J.; Koke, John. A.; Smoot, James C.; Smoot, Laura M.; Stahl, David A.

    2004-01-01

    During space exploration, the control of terrestrial microbes associated with robotic space vehicles intended to land on extraterrestrial solar system bodies is necessary to prevent forward contamination and maintain scientific integrity during the search for life. Microorganisms associated with the spacecraft assembly environment can be a source of contamination for the spacecraft. In this study, we have monitored the microbial burden of air samples of the Mars Exploration Rovers' assembly facility at the Kennedy Space Center utilizing complementary diagnostic tools. To estimate the microbial burden and identify potential contaminants in the assembly facility, several microbiological techniques were used including culturing, cloning and sequencing of 16S rRNA genes, DNA microarray analysis, and ATP assays to assess viable microorganisms. Culturing severely underestimated types and amounts of contamination since many of the microbes implicated by molecular analyses were not cultivable. In addition to the cultivation of Agrobacterium, Burkholderia and Bacillus species, the cloning approach retrieved 16s rDNA sequences of oligotrophs, symbionts, and y-proteobacteria members. DNA microarray analysis based on rational probe design and dissociation curves complemented existing molecular techniques and produced a highly parallel, high resolution analysis of contaminating microbial populations. For instance, strong hybridization signals to probes targeting the Bacillus species indicated that members of this species were present in the assembly area samples; however, differences in dissociation curves between perfect-match and air sample sequences showed that these samples harbored nucleotide polymorphisms. Vegetative cells of several isolates were resistant when subjected to treatments of UVC (254 nm) and vapor H202 (4 mg/L). This study further validates the significance of non-cultivable microbes in association with spacecraft assembly facilities, as our analyses have

  5. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  6. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  7. Descriptive analyses of caregiver reprimands.

    PubMed

    Sloman, Kimberly N; Vollmer, Timothy R; Cotnoir, Nicole M; Borrero, Carrie S W; Borrero, John C; Samaha, Andrew L; St Peter, Claire C

    2005-01-01

    We conducted descriptive observations of 5 individuals with developmental disabilities and severe problem behavior while they interacted with their caregivers in either simulated environments (an inpatient hospital facility) or in their homes. The focus of the study was on caregiver reprimands and child problem behavior. Thus, we compared the frequency of problem behavior that immediately preceded a caregiver reprimand to that immediately following a caregiver reprimand, and the results showed that the frequency of problem behavior decreased following a reprimand. It is possible that caregiver reprimands are negatively reinforced by the momentary attenuation of problem behavior, and the implications for long- and short-term effects on caregiver behavior are discussed.

  8. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  9. Neutronic Analyses of the Trade Demonstration Facility

    SciTech Connect

    Rubbia, C.

    2004-09-15

    The TRiga Accelerator-Driven Experiment (TRADE), to be performed in the TRIGA reactor of the ENEA-Casaccia Centre in Italy, consists of the coupling of an external proton accelerator to a target to be installed in the central channel of the reactor scrammed to subcriticality. This pilot experiment, aimed at a global demonstration of the accelerator-driven system concept, is based on an original idea of C. Rubbia. The present paper reports the results of some neutronic analyses focused on the feasibility of TRADE. Results show that all relevant experiments (at different power levels in a wide range of subcriticalities) can be carried out with relatively limited modifications to the present TRIGA reactor.

  10. Methylation analyses in liquid biopsy

    PubMed Central

    Lissa, Delphine

    2016-01-01

    Lung cancer is the leading cause of cancer-related deaths worldwide. Recent implementation of low-dose computed tomography (LDCT) screening is predicted to lead to diagnosis of lung cancer at an earlier stage, with survival benefit. However, there is still a pressing need for biomarkers that will identify individuals eligible for screening, as well as improve the diagnostic accuracy of LDCT. In addition, biomarkers for prognostic stratification of patients with early stage disease, and those that can be used as surrogates to monitor tumor evolution, will greatly improve clinical management. Molecular alterations found in the DNA of tumor cells, such as mutations, translocations and methylation, are reflected in DNA that is released from the tumor into the bloodstream. Thus, in recent years, circulating tumor DNA (ctDNA) has gained increasing attention as a noninvasive alternative to tissue biopsies and potential surrogate for the entire tumor genome. Activating gene mutations found in ctDNA have been proven effective in predicting response to targeted therapy. Analysis of ctDNA is also a valuable tool for longitudinal follow-up of cancer patients that does not require serial biopsies and may anticipate the acquisition of resistance. DNA methylation has also emerged as a promising marker for early detection, prognosis and real-time follow-up of tumor dynamics that is independent of the genomic composition of the primary tumor. This review summarizes the various investigational applications of methylated ctDNA in lung cancer reported to date. It also provides a brief overview of the technologies for analysis of DNA methylation in liquid biopsies, and the challenges that befall the implementation of methylated ctDNA into routine clinical practice. PMID:27826530

  11. Aerothermodynamic Analyses of Towed Ballutes

    NASA Technical Reports Server (NTRS)

    Gnoffo, Peter A.; Buck, Greg; Moss, James N.; Nielsen, Eric; Berger, Karen; Jones, William T.; Rudavsky, Rena

    2006-01-01

    A ballute (balloon-parachute) is an inflatable, aerodynamic drag device for application to planetary entry vehicles. Two challenging aspects of aerothermal simulation of towed ballutes are considered. The first challenge, simulation of a complete system including inflatable tethers and a trailing toroidal ballute, is addressed using the unstructured-grid, Navier-Stokes solver FUN3D. Auxiliary simulations of a semi-infinite cylinder using the rarefied flow, Direct Simulation Monte Carlo solver, DSV2, provide additional insight into limiting behavior of the aerothermal environment around tethers directly exposed to the free stream. Simulations reveal pressures higher than stagnation and corresponding large heating rates on the tether as it emerges from the spacecraft base flow and passes through the spacecraft bow shock. The footprint of the tether shock on the toroidal ballute is also subject to heating amplification. Design options to accommodate or reduce these environments are discussed. The second challenge addresses time-accurate simulation to detect the onset of unsteady flow interactions as a function of geometry and Reynolds number. Video of unsteady interactions measured in the Langley Aerothermodynamic Laboratory 20-Inch Mach 6 Air Tunnel and CFD simulations using the structured grid, Navier-Stokes solver LAURA are compared for flow over a rigid spacecraft-sting-toroid system. The experimental data provides qualitative information on the amplitude and onset of unsteady motion which is captured in the numerical simulations. The presence of severe unsteady fluid - structure interactions is undesirable and numerical simulation must be able to predict the onset of such motion.

  12. Topological Analyses of Symmetric Eruptive Prominences

    NASA Astrophysics Data System (ADS)

    Panasenco, O.; Martin, S. F.

    Erupting prominences (filaments) that we have analyzed from Hα Doppler data at Helio Research and from SOHO/EIT 304 Å, show strong coherency between their chirality, the direction of the vertical and lateral motions of the top of the prominences, and the directions of twisting of their legs. These coherent properties in erupting prominences occur in two patterns of opposite helicity; they constitute a form of dynamic chirality called the ``roll effect." Viewed from the positive network side as they erupt, many symmetrically-erupting dextral prominences develop rolling motion toward the observer along with right-hand helicity in the left leg and left-hand helicity in the right leg. Many symmetricaly-erupting sinistral prominences, also viewed from the positive network field side, have the opposite pattern: rolling motion at the top away from the observer, left-hand helical twist in the left leg, and right-hand twist in the right leg. We have analysed the motions seen in the famous movie of the ``Grand Daddy" erupting prominence and found that it has all the motions that define the roll effect. From our analyses of this and other symmetric erupting prominences, we show that the roll effect is an alternative to the popular hypothetical configuration of an eruptive prominence as a twisted flux rope or flux tube. Instead we find that a simple flat ribbon can be bent such that it reproduces nearly all of the observed forms. The flat ribbon is the most logical beginning topology because observed prominence spines already have this topology prior to eruption and an initial long magnetic ribbon with parallel, non-twisted threads, as a basic form, can be bent into many more and different geometrical forms than a flux rope.

  13. We're Playing "Jeremy Kyle"! Television Talk Shows in the Playground

    ERIC Educational Resources Information Center

    Marsh, Jackie; Bishop, Julia

    2014-01-01

    This paper focuses on an episode of play in a primary school playground in England, which featured a group of children re-enacting elements of the television talk show "The Jeremy Kyle Show". The episode is analysed in the light of work that has identified the key elements of the talk show genre and the children's play is examined in…

  14. Bayesian inference analyses of the polygenic architecture of rheumatoid arthritis.

    PubMed

    Stahl, Eli A; Wegmann, Daniel; Trynka, Gosia; Gutierrez-Achury, Javier; Do, Ron; Voight, Benjamin F; Kraft, Peter; Chen, Robert; Kallberg, Henrik J; Kurreeman, Fina A S; Kathiresan, Sekar; Wijmenga, Cisca; Gregersen, Peter K; Alfredsson, Lars; Siminovitch, Katherine A; Worthington, Jane; de Bakker, Paul I W; Raychaudhuri, Soumya; Plenge, Robert M

    2012-03-25

    The genetic architectures of common, complex diseases are largely uncharacterized. We modeled the genetic architecture underlying genome-wide association study (GWAS) data for rheumatoid arthritis and developed a new method using polygenic risk-score analyses to infer the total liability-scale variance explained by associated GWAS SNPs. Using this method, we estimated that, together, thousands of SNPs from rheumatoid arthritis GWAS explain an additional 20% of disease risk (excluding known associated loci). We further tested this method on datasets for three additional diseases and obtained comparable estimates for celiac disease (43% excluding the major histocompatibility complex), myocardial infarction and coronary artery disease (48%) and type 2 diabetes (49%). Our results are consistent with simulated genetic models in which hundreds of associated loci harbor common causal variants and a smaller number of loci harbor multiple rare causal variants. These analyses suggest that GWAS will continue to be highly productive for the discovery of additional susceptibility loci for common diseases.

  15. Improving small-angle X-ray scattering data for structural analyses of the RNA world

    PubMed Central

    Rambo, Robert P.; Tainer, John A.

    2010-01-01

    Defining the shape, conformation, or assembly state of an RNA in solution often requires multiple investigative tools ranging from nucleotide analog interference mapping to X-ray crystallography. A key addition to this toolbox is small-angle X-ray scattering (SAXS). SAXS provides direct structural information regarding the size, shape, and flexibility of the particle in solution and has proven powerful for analyses of RNA structures with minimal requirements for sample concentration and volumes. In principle, SAXS can provide reliable data on small and large RNA molecules. In practice, SAXS investigations of RNA samples can show inconsistencies that suggest limitations in the SAXS experimental analyses or problems with the samples. Here, we show through investigations on the SAM-I riboswitch, the Group I intron P4-P6 domain, 30S ribosomal subunit from Sulfolobus solfataricus (30S), brome mosaic virus tRNA-like structure (BMV TLS), Thermotoga maritima asd lysine riboswitch, the recombinant tRNAval, and yeast tRNAphe that many problems with SAXS experiments on RNA samples derive from heterogeneity of the folded RNA. Furthermore, we propose and test a general approach to reducing these sample limitations for accurate SAXS analyses of RNA. Together our method and results show that SAXS with synchrotron radiation has great potential to provide accurate RNA shapes, conformations, and assembly states in solution that inform RNA biological functions in fundamental ways. PMID:20106957

  16. Photographic copy of photograph, aerial view looking north and showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of photograph, aerial view looking north and showing Test Stand 'A' (at bottom), Test Stand 'B' (upper right), and a portion of Test Stand 'C' (top of view). Compare HAER CA-163-1 and 2 and note addition of liquid nitrogen storage tank (Building 4262/E-63) to west of Test Stand 'C' as well as various ancillary facilities located behind earth barriers near Test Stand 'C.' (JPL negative no. 384-3006-A, 12 December 1961) - Jet Propulsion Laboratory Edwards Facility, Edwards Air Force Base, Boron, Kern County, CA

  17. Credit PSR. This view shows the west and north facades ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Credit PSR. This view shows the west and north facades of the storage facility as seen when approaching from Circle Drive, looking east (92°). The metal shed at right was the original structure; the second shed is a later addition. All structures are metal frame covered with metal cladding, grounding them electrically and rendering them fireproof. The entire facility was rated for a maximum of 100,000 pounds (45,450 Kg) of class 1.3 materials, and four personnel - Jet Propulsion Laboratory Edwards Facility, Solid Oxidizer Storage, Edwards Air Force Base, Boron, Kern County, CA

  18. 5. Photographic copy of engineering drawing showing plans, elevation and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photographic copy of engineering drawing showing plans, elevation and section of Deluge Water System, including reservior (4316), Pump House (4317), and water tower. Job No. Muroc A(5-ll), Military Construction, San Bernardino-Mojave Area, San Bernardino, California: Muroc Bombing Range, Muroc Lake, California.; Additional Facilities for Materiel Center Flight Test Base, Water Supply System, Plans and Sections, Sheet 5 of 10, May 1943. Records on file at AFFTC/CE-CECC-B (Design/Construction Flight/RPMC), Edwards AFB, California. - Edwards Air Force Base, North Base, Deluge Water Pumping Station, Near Second & D Streets, Boron, Kern County, CA

  19. Kuwaiti oil sector shows more signs of recovery

    SciTech Connect

    Not Available

    1992-04-06

    This paper reports that Kuwait's oil sector continues to show signs of recovery from the Persian Gulf war. On Mar. 23 Kuwait Petroleum Co. (KPC) loaded the country's first shipment of liquefied petroleum gas for export since the Iraqi invasion in August 1990. In addition, the first shipment of Kuwaiti crude recovered from giant oil lakes formed by hundreds of wild wells sabotaged in the war was to arrive by tanker in Naples, Italy, late last month. The tanker is carrying 210,000 bbl of crude. However, the project to clean up the lakes and recover more oil, undertaken by Bechtel Corp. with Kuwait Oil Co. (KOC), has reached a stand still.

  20. The Frontiers of Additive Manufacturing

    SciTech Connect

    Grote, Christopher John

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  1. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  2. Organic Phosphorus Characterisation in Agricultural Soils by Enzyme Addition Assays

    NASA Astrophysics Data System (ADS)

    Jarosch, Klaus; Frossard, Emmanuel; Bünemann, Else K.

    2013-04-01

    Phosphorus (P) is a non-renewable resource and it is a building block of many molecules indispensable for life. Up to 80 per cent of total soil P can be in organic form. Hydrolysability and thereby availability to plants and microorganisms differ strongly among the multitude of chemical forms of soil organic P. A recent approach to characterise organic P classes is the addition of specific enzymes which hydrolyse organic P to inorganic orthophosphate, making it detectable by colorimetry. Based on the substrate specificity of the added enzymes, conclusions about the hydrolysed forms of organic P can then be made. The aim of this study was to determine the applicability of enzyme addition assays for the characterisation of organic P species in soil:water suspensions of soils with differing properties. To this end, ten different soil samples originating from four continents, with variable pH (in water) values (4.2-8.0), land management (grassland or cropped land) and P fertilization intensity were analysed. Three different enzymes were used (acid phosphatase, nuclease and phytase). Acid phosphatase alone or in combination with nuclease was applied to determine the content of P in simple monoesters (monoester-like P) and P in DNA (DNA-like P), while P hydrolysed from myo-inositol hexakisphosphate (Ins6P-like P) was calculated from P release after incubation with phytase minus P release by acid phosphatase. To reduce sorption of inorganic P on soil particles of the suspension, especially in highly weathered soils, soil specific EDTA additions were determined in extensive pre-tests. The results of these pre-tests showed that recoveries of at least 30 per cent could be achieved in all soils. Thus, detection of even small organic P pools, such as DNA-like P, was possible in all soils if a suitable EDTA concentration was chosen. The enzyme addition assays provided information about the hydrolysable quantities of the different classes of soil organic P compounds as affected

  3. Additive Manufacturing Integrated Energy Demonstration

    SciTech Connect

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-02-05

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  4. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  5. Additive Manufacturing Integrated Energy Demonstration

    ScienceCinema

    Jackson, Roderick; Lee, Brian; Love, Lonnie; Mabe, Gavin; Keller, Martin; Curran, Scott; Chinthavali, Madhu; Green, Johney; Sawyer, Karma; Enquist, Phil

    2016-07-12

    Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy between a building and a vehicle. And, utilizing advanced manufacturing and rapid innovation, it only took one year from concept to launch.

  6. Nanoengineered Additives for Active Coatings

    DTIC Science & Technology

    2007-04-01

    commercial ad bial activ component from the coating, leading to eventual depletion of the film. Small TPU samples were evaluated using a Kirby - Bauer ...7 Table 5. Summary of 24-hr ASTM E 2180 tests with 1 weight-percent additive in PUr (solvent dispersible) based on 6-log loading of...Noveon X-1150). The ASTM E 2180 test is run in triplicate (Note that alternative ro 1° amines) was suspended in dry tetrahydrofuran (THF) (150 mL) in

  7. HLA region excluded by linkage analyses of early onset periodontitis

    SciTech Connect

    Sun, C.; Wang, S.; Lopez, N.

    1994-09-01

    Previous studies suggested that HLA genes may influence susceptibility to early-onset periodontitis (EOP). Segregation analyses indicate that EOP may be due to a single major gene. We conducted linkage analyses to assess possible HLA effects on EOP. Fifty families with two or more close relatives affected by EOP were ascertained in Virginia and Chile. A microsatellite polymorphism within the HLA region (at the tumor necrosis factor beta locus) was typed using PCR. Linkage analyses used a donimant model most strongly supported by previous studies. Assuming locus homogeneity, our results exclude a susceptibility gene within 10 cM on either side of our marker locus. This encompasses all of the HLA region. Analyses assuming alternative models gave qualitatively similar results. Allowing for locus heterogeneity, our data still provide no support for HLA-region involvement. However, our data do not statistically exclude (LOD <-2.0) hypotheses of disease-locus heterogeneity, including models where up to half of our families could contain an EOP disease gene located in the HLA region. This is due to the limited power of even our relatively large collection of families and the inherent difficulties of mapping genes for disorders that have complex and heterogeneous etiologies. Additional statistical analyses, recruitment of families, and typing of flanking DNA markers are planned to more conclusively address these issues with respect to the HLA region and other candidate locations in the human genome. Additional results for markers covering most of the human genome will also be presented.

  8. Reversible Oxidative Addition at Carbon.

    PubMed

    Eichhorn, Antonius F; Fuchs, Sonja; Flock, Marco; Marder, Todd B; Radius, Udo

    2017-04-07

    The reactivity of N-heterocyclic carbenes (NHCs) and cyclic alkyl amino carbenes (cAACs) with arylboronate esters is reported. The reaction with NHCs leads to the reversible formation of thermally stable Lewis acid/base adducts Ar-B(OR)2 ⋅NHC (Add1-Add6). Addition of cAAC(Me) to the catecholboronate esters 4-R-C6 H4 -Bcat (R=Me, OMe) also afforded the adducts 4-R-C6 H4 Bcat⋅cAAC(Me) (Add7, R=Me and Add8, R=OMe), which react further at room temperature to give the cAAC(Me) ring-expanded products RER1 and RER2. The boronate esters Ar-B(OR)2 of pinacol, neopentylglycol, and ethyleneglycol react with cAAC at RT via reversible B-C oxidative addition to the carbene carbon atom to afford cAAC(Me) (B{OR}2 )(Ar) (BCA1-BCA6). NMR studies of cAAC(Me) (Bneop)(4-Me-C6 H4 ) (BCA4) demonstrate the reversible nature of this oxidative addition process.

  9. First-born siblings show better second language skills than later born siblings.

    PubMed

    Keller, Karin; Troesch, Larissa M; Grob, Alexander

    2015-01-01

    We examined the extent to which three sibling structure variables number of siblings, birth order, and presence of an older sibling at school age are linked to the second language skills of bilingual children. The research questions were tested using an ethnically heterogeneous sample of 1209 bilingual children with German as a second language. Controlling for children's age, sex, nationality, number of children's books at home, family language and parental German language skills, hierarchical regression analyses showed an inverse relationship between the number of siblings and second language skills: the more siblings a child had, the lower was his/her second language proficiency. This relationship was mediated by attendance in early education institutions. Moreover, first-born siblings showed better second language skills than later born siblings. The current study revealed that the resource dilution model, i.e., the decrease in resources for every additional sibling, holds for second language acquisition. Moreover, the results indicate that bilingual children from families with several children benefit from access to early education institutions.

  10. First-born siblings show better second language skills than later born siblings

    PubMed Central

    Keller, Karin; Troesch, Larissa M.; Grob, Alexander

    2015-01-01

    We examined the extent to which three sibling structure variables number of siblings, birth order, and presence of an older sibling at school age are linked to the second language skills of bilingual children. The research questions were tested using an ethnically heterogeneous sample of 1209 bilingual children with German as a second language. Controlling for children’s age, sex, nationality, number of children’s books at home, family language and parental German language skills, hierarchical regression analyses showed an inverse relationship between the number of siblings and second language skills: the more siblings a child had, the lower was his/her second language proficiency. This relationship was mediated by attendance in early education institutions. Moreover, first-born siblings showed better second language skills than later born siblings. The current study revealed that the resource dilution model, i.e., the decrease in resources for every additional sibling, holds for second language acquisition. Moreover, the results indicate that bilingual children from families with several children benefit from access to early education institutions. PMID:26089806

  11. Evidence showing duplication and recombination of cel genes in tandem from hyperthermophilic Thermotoga sp.

    PubMed

    Kim, Min Keun; Kang, Tae Ho; Kim, Jungho; Kim, Hoon; Yun, Han Dae

    2012-12-01

    This study was conducted to assess the gene duplication and diversification of tandem cellulase genes in thermophilic bacteria. The tandem cellulase genes cel5C and cel5D were cloned from Thermotoga maritima MSB8, and a survey of the thermophilic bacterial genome for tandem cel genes from the databases was carried out. A clone having 2.3 kb fragment from T. maritima MSB8 showed cellulase activity, which had two open reading frames in tandem (cel5C and cel5D). The cel5C gene has 954 bp, which encodes a protein of 317 amino acid residues with a signal peptide of 23 amino acids, and the other gene cel5D consisting of 990 bp encoding a protein of 329 amino acid residues. These two proteins have similarity with the enzymes of glycosyl hydrolase family 5. From the enzyme assay, it was observed that Cel5C was extracellular and Cel5D was intracellular cellulase. Phylogenetic and homology matrix analyses of DNA and protein sequences revealed that family 12 cellulase enzymes Cel12A and Cel12B displayed higher homology (>50 %), but Cel5C and Cel5D enzymes belong to family 5 displayed lower homology (<30 %). In addition, repeated and mirror sequences in tandem genes are supposed to show the existence of gene duplication and recombination.

  12. Genes identified by visible mutant phenotypes show increased bias toward one of two subgenomes of maize.

    PubMed

    Schnable, James C; Freeling, Michael

    2011-03-10

    Not all genes are created equal. Despite being supported by sequence conservation and expression data, knockout homozygotes of many genes show no visible effects, at least under laboratory conditions. We have identified a set of maize (Zea mays L.) genes which have been the subject of a disproportionate share of publications recorded at MaizeGDB. We manually anchored these "classical" maize genes to gene models in the B73 reference genome, and identified syntenic orthologs in other grass genomes. In addition to proofing the most recent version 2 maize gene models, we show that a subset of these genes, those that were identified by morphological phenotype prior to cloning, are retained at syntenic locations throughout the grasses at much higher levels than the average expressed maize gene, and are preferentially found on the maize1 subgenome even with a duplicate copy is still retained on the opposite subgenome. Maize1 is the subgenome that experienced less gene loss following the whole genome duplication in maize lineage 5-12 million years ago and genes located on this subgenome tend to be expressed at higher levels in modern maize. Links to the web based software that supported our syntenic analyses in the grasses should empower further research and support teaching involving the history of maize genetic research. Our findings exemplify the concept of "grasses as a single genetic system," where what is learned in one grass may be applied to another.

  13. Showing and Telling Farming: Agricultural Shows and Re-Imaging British Agriculture

    ERIC Educational Resources Information Center

    Holloway, Lewis

    2004-01-01

    Some actors in the ''mainstream'' agricultural sector are beginning to engage in strategies of influencing public perceptions of farming, responding to public anxieties over industrialised agriculture and to a supposed separation of non-farming publics from food production. This paper focuses on agricultural shows as sites and events central to…

  14. Pawnee Nation Energy Option Analyses

    SciTech Connect

    Matlock, M.; Kersey, K.; Riding In, C.

    2009-07-31

    introduced two model energy codes Pawnee Nation should consider for adoption. Summary of Current and Expected Future Electricity Usage The research team provided a summary overview of electricity usage patterns in current buildings and included discussion of known plans for new construction. Utility Options Review Pawnee Nation electric utility options were analyzed through a four-phase process, which included: 1) summarizing the relevant utility background information; 2) gathering relevant utility assessment data; 3) developing a set of realistic Pawnee electric utility service options, and 4) analyzing the various Pawnee electric utility service options for the Pawnee Energy Team’s consideration. III. Findings and Recommendations Due to a lack of financial incentives for renewable energy, particularly at the state level, combined mediocre renewable energy resources, renewable energy development opportunities are limited for Pawnee Nation. However, near-term potential exists for development of solar hot water at the gym, and an exterior wood-fired boiler system at the tribe’s main administrative building. Pawnee Nation should also explore options for developing LFGTE resources in collaboration with the City of Pawnee. Significant potential may also exist for development of bio-energy resources within the next decade. Pawnee Nation representatives should closely monitor market developments in the bio-energy industry, establish contacts with research institutions with which the tribe could potentially partner in grant-funded research initiatives. In addition, a substantial effort by the Kaw and Cherokee tribes is underway to pursue wind development at the Chilocco School Site in northern Oklahoma where Pawnee is a joint landowner. Pawnee Nation representatives should become actively involved in these development discussions and should explore the potential for joint investment in wind development at the Chilocco site.

  15. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  16. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  17. Herbarium specimens show contrasting phenological responses to Himalayan climate

    PubMed Central

    Hart, Robbie; Salick, Jan; Ranjitkar, Sailesh; Xu, Jianchu

    2014-01-01

    Responses by flowering plants to climate change are complex and only beginning to be understood. Through analyses of 10,295 herbarium specimens of Himalayan Rhododendron collected by plant hunters and botanists since 1884, we were able to separate these responses into significant components. We found a lack of directional change in mean flowering time over the past 45 y of rapid warming. However, over the full 125 y of collections, mean flowering time shows a significant response to year-to-year changes in temperature, and this response varies with season of warming. Mean flowering advances with annual warming (2.27 d earlier per 1 °C warming), and also is delayed with fall warming (2.54 d later per 1 °C warming). Annual warming may advance flowering through positive effects on overwintering bud formation, whereas fall warming may delay flowering through an impact on chilling requirements. The lack of a directional response suggests that contrasting phenological responses to temperature changes may obscure temperature sensitivity in plants. By drawing on large collections from multiple herbaria, made over more than a century, we show how these data may inform studies even of remote localities, and we highlight the increasing value of these and other natural history collections in understanding long-term change. PMID:25002486

  18. Silver nanoparticles synthesised using plant extracts show strong antibacterial activity.

    PubMed

    Kumari, Avnesh; Guliani, Anika; Singla, Rubbel; Yadav, Ramdhan; Yadav, Sudesh Kumar

    2015-06-01

    In this study, three plants Populus alba, Hibiscus arboreus and Lantana camara were explored for the synthesis of silver nanoparticles (SNPs). The effect of reaction temperature and leaf extract (LE) concentration of P. alba, H. arboreus and L. camara was evaluated on the synthesis and size of SNPs. The SNPs were characterised by ultra-violet-visible spectroscopy, scanning electron microscopy and atomic force microscopy. The synthesis rate of SNPs was highest with LE of L. camara followed by H. arboreus and P. alba under similar conditions. L. camara LE showed maximum potential of smaller size SNPs synthesis, whereas bigger particles were formed by H. arboreous LE. The size and shape of L. camara LE synthesised SNPs were analysed by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). TEM analysis revealed the formation of SNPs of average size 17±9.5 nm with 5% LE of L. camara. The SNPs synthesised by LE of L. camara showed strong antibacterial activity against Escherichia coli. The results document that desired size SNPs can be synthesised using these plant LEs at a particular temperature for applications in the biomedical field.

  19. Taking Away and Determining the Difference--A Longitudinal Perspective on Two Models of Subtraction and the Inverse Relation to Addition

    ERIC Educational Resources Information Center

    Selter, Christoph; Prediger, Susanne; Nuhrenborger, Marcus; Hussmann, Stephan

    2012-01-01

    Subtraction can be understood by two basic models--taking away (ta) and determining the difference (dd)--and by its inverse relation to addition. Epistemological analyses and empirical examples show that the two models are not relevant only in single-digit arithmetic. As curricula should be developed in a longitudinal perspective on mathematics…

  20. Analyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior

    NASA Technical Reports Server (NTRS)

    Newman, J. C., Jr.

    1999-01-01

    A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-K(sub max) threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on a contact-K analyses and the other on crack-opening-displacement (COD) analyses. These methods gave nearly identical results under constant-amplitude loading, but under threshold simulations the contact-K analyses gave lower opening stresses than the contact COD method. Crack-growth predictions tend to support the use of contact-K analyses. Crack-growth simulations showed that remote closure can cause a rapid rise in opening stresses in the near threshold regime for low-constraint and high applied stress levels. Under low applied stress levels and high constraint, a rise in opening stresses was not observed near threshold conditions. But crack-tip-opening displacement (CTOD) were of the order of measured oxide thicknesses in the 2024 alloy under constant-R simulations. In contrast, under constant-K(sub max) testing the CTOD near threshold conditions were an order-of-magnitude larger than measured oxide thicknesses. Residual-plastic deformations under both constant-R and constant-K(sub max) threshold simulations were several times larger than the expected oxide thicknesses. Thus, residual-plastic deformations, in addition to oxide and roughness, play an integral part in threshold development.

  1. Consumption patterns and perception analyses of hangwa.

    PubMed

    Kwock, Chang Geun; Lee, Min A; Park, So Hyun

    2012-03-01

    Hangwa is a traditional food, corresponding to the current consumption trend, in need of marketing strategies to extend its consumption. Therefore, the purpose of this study was to analyze consumers' consumption patterns and perception of Hangwa to increase consumption in the market. A questionnaire was sent to 250 consumers by e-mail from Oct 8∼23, 2009 and the data from 231 persons were analyzed in this study. Statistical, descriptive, paired samples t-test, and importance-performance analyses were conducted using SPSS WIN 17.0. According to the results, Hangwa was purchased mainly 'for present' (39.8%) and the main reasons for buying it were 'traditional image' (33.3%) and 'taste' (22.5%). When importance and performance of attributes considered in purchasing Hangwa were evaluated, performance was assessed to be lower than importance for all attributes. The attributes in the first quadrant with a high importance and a high performance were 'a sanitary process', 'a rigorous quality mark' and 'taste', which were related with quality of the products. In addition, those with a high importance but a low performance were 'popularization through advertisement', 'promotion through mass media', 'conversion of thought on traditional foods', 'a reasonable price' and 'a wide range of price'. In conclusion, Hangwa manufacturers need to diversify products and extend the expiration date based on technologies to promote its consumption. In terms of price, Hangwa should become more available by lowering the price barrier for consumers who are sensitive to price.

  2. Analysing the connectivity and communication of suicidal users on twitter

    PubMed Central

    Colombo, Gualtiero B.; Burnap, Pete; Hodorog, Andrei; Scourfield, Jonathan

    2016-01-01

    In this paper we aim to understand the connectivity and communication characteristics of Twitter users who post content subsequently classified by human annotators as containing possible suicidal intent or thinking, commonly referred to as suicidal ideation. We achieve this understanding by analysing the characteristics of their social networks. Starting from a set of human annotated Tweets we retrieved the authors’ followers and friends lists, and identified users who retweeted the suicidal content. We subsequently built the social network graphs. Our results show a high degree of reciprocal connectivity between the authors of suicidal content when compared to other studies of Twitter users, suggesting a tightly-coupled virtual community. In addition, an analysis of the retweet graph has identified bridge nodes and hub nodes connecting users posting suicidal ideation with users who were not, thus suggesting a potential for information cascade and risk of a possible contagion effect. This is particularly emphasised by considering the combined graph merging friendship and retweeting links. PMID:26973360

  3. Computational Aeroelastic Analyses of a Low-Boom Supersonic Configuration

    NASA Technical Reports Server (NTRS)

    Silva, Walter A.; Sanetrik, Mark D.; Chwalowski, Pawel; Connolly, Joseph

    2015-01-01

    An overview of NASA's Commercial Supersonic Technology (CST) Aeroservoelasticity (ASE) element is provided with a focus on recent computational aeroelastic analyses of a low-boom supersonic configuration developed by Lockheed-Martin and referred to as the N+2 configuration. The overview includes details of the computational models developed to date including a linear finite element model (FEM), linear unsteady aerodynamic models, unstructured CFD grids, and CFD-based aeroelastic analyses. In addition, a summary of the work involving the development of aeroelastic reduced-order models (ROMs) and the development of an aero-propulso-servo-elastic (APSE) model is provided.

  4. The Mozart Effect: Additional Data.

    PubMed

    Hughes, John R.

    2002-04-01

    After the review of the Mozart effect was published in this journal (Hughes JR. Epilepsy Behav 2001;2:369-417), additional data from the music of Haydn and Liszt have been analyzed that may account for the decrease in seizure activity originally reported during Mozart music. Even with these added data Mozart music continued to score significantly higher than the selections from the other six composers in one of the important characteristics of this music, namely, the repetition of the melody. However Haydn's values were second highest among Mozart, J. S. Bach, Wagner, Beethoven, Chopin, and Liszt.

  5. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  6. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  7. Theatre fleet's vital additional capacity.

    PubMed

    2012-11-01

    Vanguard Healthcare's fleet of mobile surgical facilities has been deployed to healthcare sites throughout Europe and beyond for over a decade, providing vital additional clinical capacity when existing buildings are refurbished or upgraded, in the event of flood or fire, or simply to help hospitals cater for rising demand. It is a combination of careful planning, teamwork, and the specialist expertise of Vanguard's personnel--many with a clinical background--that ensures not only each unit's successful installation, but equally its subsequent running, servicing, and maintenance, the company explains.

  8. Shale JP-4 Additive Evaluation

    DTIC Science & Technology

    1986-10-01

    8217. •% . , ’ ,,,r ,% . -- - ,.-. ’ ’ 4,w% %’. " - ,’ . . . * ’, .* . TABLE OF CONTENTS .4q ,4 . * SECTION PAGE I. INTRODUCTION 1 II. TEST PARAMETERS 2 1...42 PRECEDING PAGE BLANK TABLE OF CONTENTS (CON’T) SECT ION PAGE V. CONCLUSIONS 44 REFERENCES 46 APPENDIX A Drum to Test Sample Relationship 47 APPENDIX...B.O.C.L.E. Results 40 vii LIST OF TABLES TABLE PAGE 1 Antioxidants 3 2 Raw Shale/Petroleum Fuel Properties 10 3 Drum Sample Additive Content 13 4

  9. Composite filter aids for cleanup of additives

    SciTech Connect

    Rudenko, L.I.; Sklyar, V.Y.

    1984-03-01

    This article examines the properties of composite filter aids in additive cleanup using two- and three-component filter aid composites based on perlite, kieselguhr, diatomite, asbestos, and wood flour. Filtration tests were run on naphtha solutions of the additive zinc dialkyldithiophosphate. The laboratory studies indicate that composites of perlite and kieselguhr with fibrous materials (wood flour or asbestos) show great promise for the removal of solid contaminants from the zinc disalkydithiophosphate additive. The advantages of the filter aid composite based on perlite, kieselguhr, and wood flour in comparison with the two-component composites are the higher filtration rate (by 26%) and the smaller losses of additive (by a factor of 2.1) and isobutyl alcohol (by a factor of 1.6). It is demonstrated that the filtration rate with the three components is 50-60% higher than with the composite of perlite with kieselguhr. The filtration of the zinc dialkyldithiophosphate additive using the composite filter aid based on perlite, kieselguhr, and wood flour, has been adopted at the Volgograd Petroleum Refinery. Includes 2 tables.

  10. Pyrophosphorolysis of CCA addition: implication for fidelity.

    PubMed

    Igarashi, Takao; Liu, Cuiping; Morinaga, Hironobu; Kim, Sangbumn; Hou, Ya-Ming

    2011-11-18

    In nucleic acid polymerization reaction, pyrophosphorolysis is the reversal of nucleotide addition, in which the terminal nucleotide is excised in the presence of inorganic pyrophosphate (PPi). The CCA enzymes are unusual RNA polymerases, which catalyze CCA addition to positions 74-76 at the tRNA 3' end without using a nucleic acid template. To better understand the reaction mechanism of CCA addition, we tested pyrophosphorolysis of CCA enzymes, which are divided into two structurally distinct classes. Here, we show that only class II CCA enzymes catalyze pyrophosphorolysis and that the reaction can initiate from all three CCA positions and proceed processively until the removal of nucleotide C74. Pyrophosphorolysis of class II enzymes establishes a fundamental difference from class I enzymes, and it is achieved only with the tRNA structure and with specific divalent metal ions. Importantly, pyrophosphorolysis enables class II enzymes to efficiently remove an incorrect A75 nucleotide from the 3' end, at a rate much faster than the rate of A75 incorporation, suggesting the ability to perform a previously unexpected quality control mechanism for CCA synthesis. Measurement of kinetic parameters of the class II Escherichia coli CCA enzyme reveals that the enzyme catalyzes pyrophosphorolysis slowly relative to the forward nucleotide addition and that it exhibits weak binding affinity to PPi relative to NTP, suggesting a mechanism in which PPi is rapidly released after each nucleotide addition as a driving force to promote the forward synthesis of CCA.

  11. Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process

    NASA Astrophysics Data System (ADS)

    Tian, Yuan; McAllister, Donald; Colijn, Hendrik; Mills, Michael; Farson, Dave; Nordin, Mark; Babu, Sudarsanam

    2014-09-01

    Simulative builds, typical of the tip-repair procedure, with matching compositions were deposited on an INCONEL 718 substrate using the laser additive manufacturing process. In the as-processed condition, these builds exhibit spatial heterogeneity in microstructure. Electron backscattering diffraction analyses showed highly misoriented grains in the top region of the builds compared to those of the lower region. Hardness maps indicated a 30 pct hardness increase in build regions close to the substrate over those of the top regions. Detailed multiscale characterizations, through scanning electron microscopy, electron backscattered diffraction imaging, high-resolution transmission electron microscopy, and ChemiSTEM, also showed microstructure heterogeneities within the builds in different length scales including interdendritic and interprecipitate regions. These multiscale heterogeneities were correlated to primary solidification, remelting, and solid-state precipitation kinetics of γ″ induced by solute segregation, as well as multiple heating and cooling cycles induced by the laser additive manufacturing process.

  12. Analyse de formes par moiré

    NASA Astrophysics Data System (ADS)

    Harthong, J.; Sahli, H.; Poinsignon, R.; Meyrueis, P.

    1991-01-01

    We present a mathematical analysis of moiré phenomena for shape recognition. The basic theoretical concept - and tool - will be the contour function. We show that the mathematical analysis is greatly simplified by the systematic recourse to this tool. The analysis presented permits a simultaneous treatment of two different modes of implementing the moiré technique : the direct mode (widely used and well-known), and the converse mode (scarcely used). The converse mode consists in computing and designing a grating especially for one model of object, in such a manner that if (and only if) the object is in conformity with the prescribed model, the resulting moiré fringes are parallel straight lines. We give explicit formulas and algorithms for such computations. Nous présentons une analyse mathématique du moiré permettant une reconnaissance des formes. Le concept théorique de base est celui de “ fonction de contour ”. Nous montrons que l'analyse mathématique est simplifiée en faisant appel à ces fonctions. De plus, la méthode proposée permet de traiter d'une manière unifiée les deux différents modes d'utilisation des techniques de moiré : le mode direct (le plus utilisé et le mieux connu), et le moiré inverse, qui consiste, pour un modèle d'objet donné, à calculer et réaliser un réseau spécifique, tel que si (et seulement si) un objet est conforme au modèle, les franges de moiré obtenues seront des lignes droites parallèles. Nous proposons des formules explicites et des algorithmes pour ces traitements.

  13. Addition of polyhaloalkanes to 1-vinylsilatrane

    SciTech Connect

    Voronkov, M.G.; Petukhov, L.P.; Adamovich, S.N.; Baryshok, V.P.; Rakhlin, V.I.; Shterenberg, B.Z.; Mirskov, R.G.

    1987-07-20

    In their previous work, they showed that the homolytic reaction of 1-allylsilatrane with polyhaloalkanes gives 1-halosilatranes. In the present work, they discovered the addition of polyhaloalkanes to 1-vinylsilatranes both upon photochemical initiation and in the presence of peroxides. The ease of this reaction, its regiospecificity and high product yields permit them to recommend it as a preparative method for the synthesis of 1-polyhaloalkylsilatranes.

  14. Housekeeping genes tend to show reduced upstream sequence conservation

    PubMed Central

    Farré, Domènec; Bellora, Nicolás; Mularoni, Loris; Messeguer, Xavier; Albà, M Mar

    2007-01-01

    Background Understanding the constraints that operate in mammalian gene promoter sequences is of key importance to understand the evolution of gene regulatory networks. The level of promoter conservation varies greatly across orthologous genes, denoting differences in the strength of the evolutionary constraints. Here we test the hypothesis that the number of tissues in which a gene is expressed is related in a significant manner to the extent of promoter sequence conservation. Results We show that mammalian housekeeping genes, expressed in all or nearly all tissues, show significantly lower promoter sequence conservation, especially upstream of position -500 with respect to the transcription start site, than genes expressed in a subset of tissues. In addition, we evaluate the effect of gene function, CpG island content and protein evolutionary rate on promoter sequence conservation. Finally, we identify a subset of transcription factors that bind to motifs that are specifically over-represented in housekeeping gene promoters. Conclusion This is the first report that shows that the promoters of housekeeping genes show reduced sequence conservation with respect to genes expressed in a more tissue-restricted manner. This is likely to be related to simpler gene expression, requiring a smaller number of functional cis-regulatory motifs. PMID:17626644

  15. Fuel Additives: Canada bans MMT

    SciTech Connect

    Sissell, K.

    1997-04-16

    The Canadian Senate voted late last week to ban use of the manganese-based fuel additive MMT, produced only in the US by Ethyl. MMT, which has been sold in Canada for the past 20 years and accounts for about half of Ethyl`s Canadian sales, has been criticized by environmentalists, who have raised public health concerns, and automakers, who say it harms emission control systems. {open_quotes}Canada`s vote is a great victory for public health and the environment,{close_quotes} says Environmental Defense Fund executive director Fred Krupp. {open_quotes}The US should move swiftly to follow suit and suspend sales of MMT until adequate toxicity testing on the additive is completed.{close_quotes} EPA had refused to approve MMT for sale because of health concerns but was compelled to do so by a December 1995 court ruling. Ethyl asserts the ban violates Canada`s obligations under Nafta and says it will file a damage claim with the Nafta arbitration panel.

  16. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  17. Additivity in protein–DNA interactions: how good an approximation is it?

    PubMed Central

    Benos, Panayiotis V.; Bulyk, Martha L.; Stormo, Gary D.

    2002-01-01

    Man and Stormo and Bulyk et al. recently presented their results on the study of the DNA binding affinity of proteins. In both of these studies the main conclusion is that the additivity assumption, usually applied in methods to search for binding sites, is not true. In the first study, the analysis of binding affinity data from the Mnt repressor protein bound to all possible DNA (sub)targets at positions 16 and 17 of the binding site, showed that those positions are not independent. In the second study, the authors analysed DNA binding affinity data of the wild-type mouse EGR1 protein and four variants differing on the middle finger. The binding affinity of these proteins was measured to all 64 possible trinucleotide (sub)targets of the middle finger using microarray technology. The analysis of the measurements also showed interdependence among the positions in the DNA target. In the present report, we review the data of both studies and we re- analyse them using various statistical methods, including a comparison with a multiple regression approach. We conclude that despite the fact that the additivity assumption does not fit the data perfectly, in most cases it provides a very good approximation of the true nature of the specific protein–DNA interactions. Therefore, additive models can be very useful for the discovery and prediction of binding sites in genomic DNA. PMID:12384591

  18. Graphene oxide immobilized enzymes show high thermal and solvent stability

    NASA Astrophysics Data System (ADS)

    Hermanová, Soňa; Zarevúcká, Marie; Bouša, Daniel; Pumera, Martin; Sofer, Zdeněk

    2015-03-01

    The thermal and solvent tolerance of enzymes is highly important for their industrial use. We show here that the enzyme lipase from Rhizopus oryzae exhibits exceptionally high thermal stability and high solvent tolerance and even increased activity in acetone when immobilized onto a graphene oxide (GO) nanosupport prepared by Staudenmaier and Brodie methods. We studied various forms of immobilization of the enzyme: by physical adsorption, covalent attachment, and additional crosslinking. The activity recovery was shown to be dependent on the support type, enzyme loading and immobilization procedure. Covalently immobilized lipase showed significantly better resistance to heat inactivation (the activity recovery was 65% at 70 °C) in comparison with the soluble counterpart (the activity recovery was 65% at 40 °C). Physically adsorbed lipase achieved over 100% of the initial activity in a series of organic solvents. These findings, showing enhanced thermal stability and solvent tolerance of graphene oxide immobilized enzyme, will have a profound impact on practical industrial scale uses of enzymes for the conversion of lipids into fuels.The thermal and solvent tolerance of enzymes is highly important for their industrial use. We show here that the enzyme lipase from Rhizopus oryzae exhibits exceptionally high thermal stability and high solvent tolerance and even increased activity in acetone when immobilized onto a graphene oxide (GO) nanosupport prepared by Staudenmaier and Brodie methods. We studied various forms of immobilization of the enzyme: by physical adsorption, covalent attachment, and additional crosslinking. The activity recovery was shown to be dependent on the support type, enzyme loading and immobilization procedure. Covalently immobilized lipase showed significantly better resistance to heat inactivation (the activity recovery was 65% at 70 °C) in comparison with the soluble counterpart (the activity recovery was 65% at 40 °C). Physically adsorbed

  19. Tomato Fruits Show Wide Phenomic Diversity but Fruit Developmental Genes Show Low Genomic Diversity.

    PubMed

    Mohan, Vijee; Gupta, Soni; Thomas, Sherinmol; Mickey, Hanjabam; Charakana, Chaitanya; Chauhan, Vineeta Singh; Sharma, Kapil; Kumar, Rakesh; Tyagi, Kamal; Sarma, Supriya; Gupta, Suresh Kumar; Kilambi, Himabindu Vasuki; Nongmaithem, Sapana; Kumari, Alka; Gupta, Prateek; Sreelakshmi, Yellamaraju; Sharma, Rameshwar

    2016-01-01

    Domestication of tomato has resulted in large diversity in fruit phenotypes. An intensive phenotyping of 127 tomato accessions from 20 countries revealed extensive morphological diversity in fruit traits. The diversity in fruit traits clustered the accessions into nine classes and identified certain promising lines having desirable traits pertaining to total soluble salts (TSS), carotenoids, ripening index, weight and shape. Factor analysis of the morphometric data from Tomato Analyzer showed that the fruit shape is a complex trait shared by several factors. The 100% variance between round and flat fruit shapes was explained by one discriminant function having a canonical correlation of 0.874 by stepwise discriminant analysis. A set of 10 genes (ACS2, COP1, CYC-B, RIN, MSH2, NAC-NOR, PHOT1, PHYA, PHYB and PSY1) involved in various plant developmental processes were screened for SNP polymorphism by EcoTILLING. The genetic diversity in these genes revealed a total of 36 non-synonymous and 18 synonymous changes leading to the identification of 28 haplotypes. The average frequency of polymorphism across the genes was 0.038/Kb. Significant negative Tajima'D statistic in two of the genes, ACS2 and PHOT1 indicated the presence of rare alleles in low frequency. Our study indicates that while there is low polymorphic diversity in the genes regulating plant development, the population shows wider phenotype diversity. Nonetheless, morphological and genetic diversity of the present collection can be further exploited as potential resources in future.

  20. Tomato Fruits Show Wide Phenomic Diversity but Fruit Developmental Genes Show Low Genomic Diversity

    PubMed Central

    Mohan, Vijee; Gupta, Soni; Thomas, Sherinmol; Mickey, Hanjabam; Charakana, Chaitanya; Chauhan, Vineeta Singh; Sharma, Kapil; Kumar, Rakesh; Tyagi, Kamal; Sarma, Supriya; Gupta, Suresh Kumar; Kilambi, Himabindu Vasuki; Nongmaithem, Sapana; Kumari, Alka; Gupta, Prateek; Sreelakshmi, Yellamaraju; Sharma, Rameshwar

    2016-01-01

    Domestication of tomato has resulted in large diversity in fruit phenotypes. An intensive phenotyping of 127 tomato accessions from 20 countries revealed extensive morphological diversity in fruit traits. The diversity in fruit traits clustered the accessions into nine classes and identified certain promising lines having desirable traits pertaining to total soluble salts (TSS), carotenoids, ripening index, weight and shape. Factor analysis of the morphometric data from Tomato Analyzer showed that the fruit shape is a complex trait shared by several factors. The 100% variance between round and flat fruit shapes was explained by one discriminant function having a canonical correlation of 0.874 by stepwise discriminant analysis. A set of 10 genes (ACS2, COP1, CYC-B, RIN, MSH2, NAC-NOR, PHOT1, PHYA, PHYB and PSY1) involved in various plant developmental processes were screened for SNP polymorphism by EcoTILLING. The genetic diversity in these genes revealed a total of 36 non-synonymous and 18 synonymous changes leading to the identification of 28 haplotypes. The average frequency of polymorphism across the genes was 0.038/Kb. Significant negative Tajima’D statistic in two of the genes, ACS2 and PHOT1 indicated the presence of rare alleles in low frequency. Our study indicates that while there is low polymorphic diversity in the genes regulating plant development, the population shows wider phenotype diversity. Nonetheless, morphological and genetic diversity of the present collection can be further exploited as potential resources in future. PMID:27077652

  1. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  2. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  3. Nonlinear shell analyses of the space shuttle solid rocket boosters

    NASA Technical Reports Server (NTRS)

    Knight, Norman F., Jr.; Gillian, Ronnie E.; Nemeth, Michael P.

    1989-01-01

    A variety of structural analyses have been performed on the Solid Rocket Boosters (SRB's) to provide information that would contribute to the understanding of the failure which destroyed the Space Shuttle Challenger. This paper describes nonlinear shell analyses that were performed to characterize the behavior of an overall SRB structure and a segment of the SRB in the vicinity of the External Tank Attachment (ETA) ring. Shell finite element models were used that would accurately reflect the global load transfer in an SRB in a manner such that nonlinear shell collapse and ovalization could be assessed. The purpose of these analyses was to calculate the overall deflection and stress distributions for these SRB models when subjected to mechanical loads corresponding to critical times during the launch sequence. Static analyses of these SRB models were performed using a snapshot picture of the loads. Analytical results obtained using these models show no evidence of nonlinear shell collapse for the pre-liftoff loading cases considered.

  4. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  5. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system.

  6. Optics of progressive addition lenses.

    PubMed

    Sheedy, J E; Buri, M; Bailey, I L; Azus, J; Borish, I M

    1987-02-01

    The optical characteristics of the major progressive addition lenses were measured using an automated lensometer with a specially designed lens holder to simulate eye rotation. Measurements were made every 3 degrees (about 1.5 mm) and graphs of isospherical equivalent lines and isocylinder lines were developed. Generally the near zone of these lenses is narrower and lower than in bifocal or trifocal lenses. Distinct differences exist between the various progressive lenses. The width of the near zone, rate of power progression, amount of unwanted cylinder (level with the distance center), and clarity of the distance zone are compared for the various lenses. The optical measurements demonstrate an apparent trade-off between the size of the cylinder-free area of the lens and the amount of the cylinder.

  7. Role of optimization in interdisciplinary analyses of naval structures

    NASA Technical Reports Server (NTRS)

    Dhir, S. K.; Hurwitz, M. M.

    1984-01-01

    The need for numerical design optimization of naval structures is discussed. The complexity of problems that arise due to the significant roles played by three major disciplines, i.e., structural mechanics, acoustics, and hydrodynamics are discussed. A major computer software effort that has recently begun at the David W. Taylor Naval Ship R&D Center to accommodate large multidisciplinary analyses is also described. In addition to primarily facilitating, via the use of data bases, interdisciplinary analyses for predicting the response of the Navy's ships and related structures, this software effort is expected to provide the analyst with a convenient numerical workbench for performing large numbers of analyses that may be necessary for optimizing the design performance. Finally, an example is included that investigates several aspects of optimizing a typical naval structure from the viewpoints of strength, hydrodynamic form, and acoustic characteristics.

  8. MELCOR analyses for accident progression issues

    SciTech Connect

    Dingman, S.E.; Shaffer, C.J.; Payne, A.C.; Carmel, M.K. )

    1991-01-01

    Results of calculations performed with MELCOR and HECTR in support of the NUREG-1150 study are presented in this report. The analyses examined a wide range of issues. The analyses included integral calculations covering an entire accident sequence, as well as calculations that addressed specific issues that could affect several accident sequences. The results of the analyses for Grand Gulf, Peach Bottom, LaSalle, and Sequoyah are described, and the major conclusions are summarized. 23 refs., 69 figs., 8 tabs.

  9. Electron/proton spectrometer certification documentation analyses

    NASA Technical Reports Server (NTRS)

    Gleeson, P.

    1972-01-01

    A compilation of analyses generated during the development of the electron-proton spectrometer for the Skylab program is presented. The data documents the analyses required by the electron-proton spectrometer verification plan. The verification plan was generated to satisfy the ancillary hardware requirements of the Apollo Applications program. The certification of the spectrometer requires that various tests, inspections, and analyses be documented, approved, and accepted by reliability and quality control personnel of the spectrometer development program.

  10. Diatom Cooccurrence Shows Less Segregation than Predicted from Niche Modeling

    PubMed Central

    Soininen, Janne; Alard, Didier; Rosebery, Juliette

    2016-01-01

    Species cooccurrence patterns give significant insights into the processes shaping communities. While biotic interactions have been widely studied using cooccurrence analyses in animals and larger plants, studies about cooccurrences among micro-organisms are still relatively rare. We examined stream diatom cooccurrences in France through a national database of samples. In order to test the relative influence of environmental, biotic and spatial constraints on species’ incidence distribution, cooccurrence and nestedness patterns of real communities were compared with the patterns generated from a set of standard and environmentally constrained null models. Real communities showed a higher level of segregation than the most conservative standard null models, but a general aggregation of cooccurrences when compared to environmentally constrained null models. We did not find any evidence of limiting similarity between cooccurring species. Aggregations of species cooccurrences were associated with the high levels of nestedness. Altogether, these results suggested that biotic interactions were not structuring cooccurrences of diatom species at our study scale. Instead, the patterns were more likely to be related with colonization patterns, mass effect, and local temporal dynamics of diatom biofilms. We further highlight that the association of standard and environmentally constrained null models may give realistic insight into the cooccurrence patterns of microbial communities. PMID:27128737

  11. Differentiating tremor patients using spiral analyses.

    PubMed

    Koirala, N; Muthuraman, M; Anjum, T; Chaitanya, C V; Helmolt, V F; Mideksa, K G; Lange, K; Schmidt, G; Schneider, S; Deuschl, G

    2015-01-01

    Essential tremor follows an autosomal dominant type of inheritance in the majority of patients, yet its genetic basis has not been identified. The age of onset in this tremor is bimodal, one in young age and another when they are old. The old onset is referred to as senile tremor in this study. The precise pathology is still not completely understood for both these tremors. We wanted to develop an easy diagnostic tool to differentiate these two tremors clinically. In this study, the spirals were asked to be drawn by 30 patients, 15 from each group. The spirals were recorded digitally from each hand, with and without the spiral template, using a Wacom intuos version 4 tablets. The aim of the study was to look at the easy diagnostic measures from these spirals to distinguish the two cohorts of patients. The first measure was to use the well-known clinical scores like the number of complete circles without the template, width, height, axis, and degree of severity. The second measure was to estimate the peak frequency and the peak amplitude for the position, velocity, and acceleration data, in the frequency domain. The well-known clinical scores, most of them, did not show any significant difference between the two patient cohorts except the degree of severity which showed significant difference. The peak frequency and the peak amplitude in most of the data were not significantly different between the two cohorts of patients, only the peak amplitude from the acceleration data showed significant difference. Thus, we could use these two parameters to differentiate between the two tremors patient groups, which would be an easy clinical diagnostic tool without the need for any complicated analyses.

  12. Patient-derived glioblastoma cells show significant heterogeneity in treatment responses to the inhibitor-of-apoptosis-protein antagonist birinapant

    PubMed Central

    Zakaria, Z; Tivnan, A; Flanagan, L; Murray, D W; Salvucci, M; Stringer, B W; Day, B W; Boyd, A W; Kögel, D; Rehm, M; O'Brien, D F; Byrne, A T; Prehn, J H M

    2016-01-01

    Background: Resistance to temozolomide (TMZ) greatly limits chemotherapeutic effectiveness in glioblastoma (GBM). Here we analysed the ability of the Inhibitor-of-apoptosis-protein (IAP) antagonist birinapant to enhance treatment responses to TMZ in both commercially available and patient-derived GBM cells. Methods: Responses to TMZ and birinapant were analysed in a panel of commercial and patient-derived GBM cell lines using colorimetric viability assays, flow cytometry, morphological analysis and protein expression profiling of pro- and antiapoptotic proteins. Responses in vivo were analysed in an orthotopic xenograft GBM model. Results: Single-agent treatment experiments categorised GBM cells into TMZ-sensitive cells, birinapant-sensitive cells, and cells that were insensitive to either treatment. Combination treatment allowed sensitisation to therapy in only a subset of resistant GBM cells. Cell death analysis identified three principal response patterns: Type A cells that readily activated caspase-8 and cell death in response to TMZ while addition of birinapant further sensitised the cells to TMZ-induced cell death; Type B cells that readily activated caspase-8 and cell death in response to birinapant but did not show further sensitisation with TMZ; and Type C cells that showed no significant cell death or moderately enhanced cell death in the combined treatment paradigm. Furthermore, in vivo, a Type C patient-derived cell line that was TMZ-insensitive in vitro and showed a strong sensitivity to TMZ and TMZ plus birinapant treatments. Conclusions: Our results demonstrate remarkable differences in responses of patient-derived GBM cells to birinapant single and combination treatments, and suggest that therapeutic responses in vivo may be greatly affected by the tumour microenvironment. PMID:26657652

  13. Efficient ALL vs. ALL collision risk analyses

    NASA Astrophysics Data System (ADS)

    Escobar, D.; Paskowitz, M.; Agueda, A.; Garcia, G.; Molina, M.

    2011-09-01

    In recent years, the space debris has gained a lot of attention due to the increasing amount of uncontrolled man-made objects orbiting the Earth. This population poses a significant and constantly growing thread to operational satellites. In order to face this thread in an independent manner, ESA has launched an initiative for the development of a European SSA System where GMV is participating via several activities. Apart from those activities financed by ESA, GMV has developed closeap, a tool for efficient conjunction assessment and collision probability prediction. ESÁs NAPEOS has been selected as computational engine and numerical propagator to be used in the tool, which can be considered as an add-on to the standard NAPEOS package. closeap makes use of the same orbit computation, conjunction assessment and collision risk algorithms implemented in CRASS, but at the same time both systems are completely independent. Moreover, the implementation in closeap has been validated against CRASS with excellent results. This paper describes the performance improvements implemented in closeap at algorithm level to ensure that the most time demanding scenarios (e.g., all catalogued objects are analysed against each other - all vs. all scenarios -) can be analysed in a reasonable amount of time with commercial-off-the-shelf hardware. However, the amount of space debris increases steadily due to the human activities. Thus, the number of objects involved in a full collision assessment is expected to increase notably and, consequently, the computational cost, which scales as the square of the number of objects, will increase as well. Additionally, orbit propagation algorithms that are computationally expensive might be needed to predict more accurately the trajectories of the space debris. In order to cope with such computational needs, the next natural step in the development of collision assessment tools is the use of parallelization techniques. In this paper we investigate

  14. 7 CFR 94.102 - Analyses available.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS... analyses for total ash, fat by acid hydrolysis, moisture, salt, protein, beta-carotene,...

  15. 7 CFR 94.102 - Analyses available.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS... analyses for total ash, fat by acid hydrolysis, moisture, salt, protein, beta-carotene,...

  16. Non-destructive infrared analyses: a method for provenance analyses of sandstones

    NASA Astrophysics Data System (ADS)

    Bowitz, Jörg; Ehling, Angela

    2008-12-01

    Infrared spectroscopy (IR spectroscopy) is commonly applied in the laboratory for mineral analyses in addition to XRD. Because such technical efforts are time and cost consuming, we present an infrared-based mobile method for non-destructive mineral and provenance analyses of sandstones. IR spectroscopy is based on activating chemical bonds. By irradiating a mineral mixture, special bonds are activated to vibrate depending on the bond energy (resonance vibration). Accordingly, the energy of the IR spectrum will be reduced thereby generating an absorption spectrum. The positions of the absorption maxima within the spectral region indicate the type of the bonds and in many cases identify minerals containing these bonds. The non-destructive reflection spectroscopy operates in the near infrared region (NIR) and can detect all common clay minerals as well as sulfates, hydroxides and carbonates. The spectra produced have been interpreted by computer using digital mineral libraries that have been especially collected for sandstones. The comparison of all results with XRD, RFA and interpretations of thin sections demonstrates impressively the accuracy and reliability of this method. Not only are different minerals detectable, but also differently ordered kaolinites and varieties of illites can be identified by the shape and size of the absorption bands. Especially clay minerals and their varieties in combination with their relative contents form the characteristic spectra of sandstones. Other components such as limonite, hematite and amorphous silica also influence the spectra. Sandstones, similar in colour and texture, often can be identified by their characteristic reflectance spectra. Reference libraries with more than 60 spectra of important German sandstones have been created to enable entirely computerized interpretations and identifications of these dimension stones. The analysis of infrared spectroscopy results is demonstrated with examples of different sandstones

  17. AirShow 1.0 CFD Software Users' Guide

    NASA Technical Reports Server (NTRS)

    Mohler, Stanley R., Jr.

    2005-01-01

    AirShow is visualization post-processing software for Computational Fluid Dynamics (CFD). Upon reading binary PLOT3D grid and solution files into AirShow, the engineer can quickly see how hundreds of complex 3-D structured blocks are arranged and numbered. Additionally, chosen grid planes can be displayed and colored according to various aerodynamic flow quantities such as Mach number and pressure. The user may interactively rotate and translate the graphical objects using the mouse. The software source code was written in cross-platform Java, C++, and OpenGL, and runs on Unix, Linux, and Windows. The graphical user interface (GUI) was written using Java Swing. Java also provides multiple synchronized threads. The Java Native Interface (JNI) provides a bridge between the Java code and the C++ code where the PLOT3D files are read, the OpenGL graphics are rendered, and numerical calculations are performed. AirShow is easy to learn and simple to use. The source code is available for free from the NASA Technology Transfer and Partnership Office.

  18. Integrated Waste Treatment Unit (IWTU) Input Coal Analyses and Off-Gass Filter (OGF) Content Analyses

    SciTech Connect

    Jantzen, Carol M.; Missimer, David M.; Guenther, Chris P.; Shekhawat, Dushyant; VanEssendelft, Dirk T.; Means, Nicholas C.

    2015-04-23

    in process piping and materials, in excessive off-gas absorbent loading, and in undesired process emissions. The ash content of the coal is important as the ash adds to the DMR and other vessel products which affect the final waste product mass and composition. The amount and composition of the ash also affects the reaction kinetics. Thus ash content and composition contributes to the mass balance. In addition, sodium, potassium, calcium, sulfur, and maybe silica and alumina in the ash may contribute to wall-scale formation. Sodium, potassium, and alumina in the ash will be overwhelmed by the sodium, potassium, and alumina from the feed but the impact from the other ash components needs to be quantified. A maximum coal particle size is specified so the feed system does not plug and a minimum particle size is specified to prevent excess elutriation from the DMR to the Process Gas Filter (PGF). A vendor specification was used to procure the calcined coal for IWTU processing. While the vendor supplied a composite analysis for the 22 tons of coal (Appendix A), this study compares independent analyses of the coal performed at the Savannah River National Laboratory (SRNL) and at the National Energy Technology Laboratory (NETL). Three supersacks a were sampled at three different heights within the sack in order to determine within bag variability and between bag variability of the coal. These analyses were also compared to the vendor’s composite analyses and to the coal specification. These analyses were also compared to historic data on Bestac coal analyses that had been performed at Hazen Research Inc. (HRI) between 2004-2011.

  19. Mixed species biofilms of Listeria monocytogenes and Lactobacillus plantarum show enhanced resistance to benzalkonium chloride and peracetic acid.

    PubMed

    van der Veen, Stijn; Abee, Tjakko

    2011-01-05

    We investigated the formation of single and mixed species biofilms of Listeria monocytogenes strains EGD-e and LR-991, with Lactobacillus plantarum WCFS1 as secondary species, and their resistance to the disinfectants benzalkonium chloride and peracetic acid. Modulation of growth, biofilm formation, and biofilm composition was achieved by addition of manganese sulfate and/or glucose to the BHI medium. Composition analyses of the mixed species biofilms using plate counts and fluorescence microscopy with dual fluorophores showed that mixed species biofilms were formed in BHI (total count, 8-9 log₁₀ cfu/well) and that they contained 1-2 log₁₀ cfu/well more L. monocytogenes than L. plantarum cells. Addition of manganese sulfate resulted in equal numbers of both species (total count, 8 log₁₀ cfu/well) in the mixed species biofilm, while manganese sulfate in combination with glucose, resulted in 1-2 log₁₀ more L. plantarum than L. monocytogenes cells (total count, 9 log₁₀ cfu/well). Corresponding single species biofilms of L. monocytogenes and L. plantarum contained up to 9 log₁₀ cfu/well. Subsequent disinfection treatments showed mixed species biofilms to be more resistant to treatments with the selected disinfectants. In BHI with additional manganese sulfate, both L. monocytogenes strains and L. plantarum grown in the mixed species biofilm showed less than 2 log₁₀ cfu/well inactivation after exposure for 15 min to 100 μg/ml benzalkonium chloride, while single species biofilms of both L. monocytogenes strains showed 4.5 log₁₀ cfu/well inactivation and single species biofilms of L. plantarum showed 3.3 log₁₀ cfu/well inactivation. Our results indicate that L. monocytogenes and L. plantarum mixed species biofilms can be more resistant to disinfection treatments than single species biofilms.

  20. Trend analyses with river sediment rating curves

    USGS Publications Warehouse

    Warrick, Jonathan A.

    2015-01-01

    Sediment rating curves, which are fitted relationships between river discharge (Q) and suspended-sediment concentration (C), are commonly used to assess patterns and trends in river water quality. In many of these studies it is assumed that rating curves have a power-law form (i.e., C = aQb, where a and b are fitted parameters). Two fundamental questions about the utility of these techniques are assessed in this paper: (i) How well to the parameters, a and b, characterize trends in the data? (ii) Are trends in rating curves diagnostic of changes to river water or sediment discharge? As noted in previous research, the offset parameter, a, is not an independent variable for most rivers, but rather strongly dependent on b and Q. Here it is shown that a is a poor metric for trends in the vertical offset of a rating curve, and a new parameter, â, as determined by the discharge-normalized power function [C = â (Q/QGM)b], where QGM is the geometric mean of the Q values sampled, provides a better characterization of trends. However, these techniques must be applied carefully, because curvature in the relationship between log(Q) and log(C), which exists for many rivers, can produce false trends in â and b. Also, it is shown that trends in â and b are not uniquely diagnostic of river water or sediment supply conditions. For example, an increase in â can be caused by an increase in sediment supply, a decrease in water supply, or a combination of these conditions. Large changes in water and sediment supplies can occur without any change in the parameters, â and b. Thus, trend analyses using sediment rating curves must include additional assessments of the time-dependent rates and trends of river water, sediment concentrations, and sediment discharge.

  1. Molecular Biomarker Analyses Using Circulating Tumor Cells

    PubMed Central

    Punnoose, Elizabeth A.; Atwal, Siminder K.; Spoerke, Jill M.; Savage, Heidi; Pandita, Ajay; Yeh, Ru-Fang; Pirzkall, Andrea; Fine, Bernard M.; Amler, Lukas C.; Chen, Daniel S.; Lackner, Mark R.

    2010-01-01

    Background Evaluation of cancer biomarkers from blood could significantly enable biomarker assessment by providing a relatively non-invasive source of representative tumor material. Circulating Tumor Cells (CTCs) isolated from blood of metastatic cancer patients hold significant promise in this regard. Methodology/Principal Findings Using spiked tumor-cells we evaluated CTC capture on different CTC technology platforms, including CellSearch® and two biochip platforms, and used the isolated CTCs to develop and optimize assays for molecular characterization of CTCs. We report similar performance for the various platforms tested in capturing CTCs, and find that capture efficiency is dependent on the level of EpCAM expression. We demonstrate that captured CTCs are amenable to biomarker analyses such as HER2 status, qRT-PCR for breast cancer subtype markers, KRAS mutation detection, and EGFR staining by immunofluorescence (IF). We quantify cell surface expression of EGFR in metastatic lung cancer patient samples. In addition, we determined HER2 status by IF and FISH in CTCs from metastatic breast cancer patients. In the majority of patients (89%) we found concordance with HER2 status from patient tumor tissue, though in a subset of patients (11%), HER2 status in CTCs differed from that observed in the primary tumor. Surprisingly, we found CTC counts to be higher in ER+ patients in comparison to HER2+ and triple negative patients, which could be explained by low EpCAM expression and a more mesenchymal phenotype of tumors belonging to the basal-like molecular subtype of breast cancer. Conclusions/Significance Our data suggests that molecular characterization from captured CTCs is possible and can potentially provide real-time information on biomarker status. In this regard, CTCs hold significant promise as a source of tumor material to facilitate clinical biomarker evaluation. However, limitations exist from a purely EpCAM based capture system and addition of antibodies

  2. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  3. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  4. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  5. Children's understanding of additive concepts.

    PubMed

    Robinson, Katherine M; Dubé, Adam K; Beatch, Jacqueline-Ann

    2017-04-01

    Most research on children's arithmetic concepts is based on one concept at a time, limiting the conclusions that can be made about how children's conceptual knowledge of arithmetic develops. This study examined six arithmetic concepts (identity, negation, commutativity, equivalence, inversion, and addition and subtraction associativity) in Grades 3, 4, and 5. Identity (a-0=a) and negation (a-a=0) were well understood, followed by moderate understanding of commutativity (a+b=b+a) and inversion (a+b-b=a), with weak understanding of equivalence (a+b+c=a+[b+c]) and associativity (a+b-c=[b-c]+a). Understanding increased across grade only for commutativity and equivalence. Four clusters were found: The Weak Concept cluster understood only identity and negation; the Two-Term Concept cluster also understood commutativity; the Inversion Concept cluster understood identity, negation, and inversion; and the Strong Concept cluster had the strongest understanding of all of the concepts. Grade 3 students tended to be in the Weak and Inversion Concept clusters, Grade 4 students were equally likely to be in any of the clusters, and Grade 5 students were most likely to be in the Two-Term and Strong Concept clusters. The findings of this study highlight that conclusions about the development of arithmetic concepts are highly dependent on which concepts are being assessed and underscore the need for multiple concepts to be investigated at the same time.

  6. 16. Copy of a post card showing the Lavelle School, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Copy of a post card showing the Lavelle School, c.1900; note that the building is one story in height and contains a one story addition in the rear. It also contains a projecting entrance tower and the windows have shutters. There are no windows or chimneys on the west wall and the front yard is defined by a wood picket fence on the west side and a metal picket fence on the north side. The identities of the children standing near the door are not known. (Copy of photo reproduced with permission from the Ashland Public Library and Mrs. Helen Edling, former Postmaster of Lavelle {she currently resides in Lavelle}; the original photograph is in Mrs. Edling's collection) - Lavelle School, Township Road 905, Main Street, Village of Lavelle, Lavelle, Schuylkill County, PA

  7. 5. Credit BG. This interior view shows the weigh room, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Credit BG. This interior view shows the weigh room, looking west (240°): Electric lighting and scale read-outs (boxes with circular windows on the wall) are fitted with explosion-proof enclosures; these enclosures prevent malfunctioning electrical parts from sparking and starting fires or explosions. One marble table and scale have been removed at the extreme left of the view. Two remaining scales handle small and large quantities of propellants and additives. Marble tables do not absorb chemicals or conduct electricity; their mass also prevents vibration from upsetting the scales. The floor has an electrically conductive coating to dissipate static electric charges, thus preventing sparks which might ignite propellants. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

  8. Malignant melanoma showing a rapid response to nivolumab.

    PubMed

    Tsutsumi, Miho; Asai, Jun; Wada, Makoto; Takenaka, Hideya; Katoh, Norito

    2016-02-01

    Malignant melanoma is a highly aggressive skin tumour, with a recent rise in incidence. Nivolumab is a recently developed anti-programmed cell death-1 immune checkpoint inhibitor and its usage has resulted in a significant improvement in the overall survival of patients with metastatic melanomas. We report a case of advanced melanoma that showed a significant and rapid response to nivolumab treatment. The patient displayed multiple melanoma-associated vitiligo prior to treatment; this symptom was theorised to indicate potentially immunoreactive melanoma and the need for nivolumab. In addition, interferon-β was injected prior to nivolumab treatment. The significant rapid response to nivolumab suggested the induction of a marked immune response against melanoma by interferon-β. Therefore, interferon-β could be a useful and effective adjuvant for nivolumab therapy.

  9. Polymer: bioceramic composites optimization by tetracycline addition.

    PubMed

    Pataro, André L; Oliveira, Michele F; Teixeira, Karina I R; Turchetti-Maia, Regina M M; Lopes, Miriam T P; Wykrota, Francisco H L; Sinisterra, Rubén D; Cortés, Maria E

    2007-05-04

    The aim of this study was to evaluate the biocompatibility of composites of poly-lactic acid polymer (PLA) and copolymer of lactic and glycolic acid (PLGA), dispersed in a bioceramic matrix, Osteosynt (BC), to which tetracycline (TC) was added. The in vitro test used direct contact test (ASTM F-813) and elution test (USP-XXIII, ISO 10993-5), and in vivo evaluation was performed after subcutaneous implantation in outbread Swiss mice. The 0.01% (w/w) TC addition did not affect composite cytotoxicity in vitro. The macroscopic and histologic evaluation in vivo after 1, 7, 13, 21, 28 and 56 days showed an initial intense infiltrate of inflammatory cells for most of the groups. The tissue showed normal pattern after 21 days for all the groups. TC addition exhibited significantly larger reduction of inflammation signs (Mann-Whitney test, p<0.05) in the critical period of the resolution of the inflammatory process. Angiogenesis, cellular adsorption and fibrous deposit were observed on SEM evaluation. In conclusion, TC addition optimized composites polymer/bioceramic biocompatibility, contributing to anti-inflammatory response during the early phases of the wound healing process.

  10. Neural activation in the "reward circuit" shows a nonlinear response to facial attractiveness.

    PubMed

    Liang, Xiaoyun; Zebrowitz, Leslie A; Zhang, Yi

    2010-01-01

    Positive behavioral responses to attractive faces have led neuroscientists to investigate underlying neural mechanisms in a "reward circuit" that includes brain regions innervated by dopamine pathways. Using male faces ranging from attractive to extremely unattractive, disfigured ones, this study is the first to demonstrate heightened responses to both rewarding and aversive faces in numerous areas of this putative reward circuit. Parametric analyses employing orthogonal linear and nonlinear regressors revealed positive nonlinear effects in anterior cingulate cortex, lateral orbital frontal cortex (LOFC), striatum (nucleus accumbens, caudate, putamen), and ventral tegmental area, in addition to replicating previously documented linear effects in medial orbital frontal cortex (MOFC) and LOFC and nonlinear effects in amygdala and MOFC. The widespread nonlinear responses are consistent with single cell recordings in animals showing responses to both rewarding and aversive stimuli, and with some human fMRI investigations of non-face stimuli. They indicate that the reward circuit does not process face valence with any simple dissociation of function across structures. Perceiver gender modulated some responses to our male faces: Women showed stronger linear effects, and men showed stronger nonlinear effects, which may have functional implications. Our discovery of nonlinear responses to attractiveness throughout the reward circuit echoes the history of amygdala research: Early work indicated a linear response to threatening stimuli, including faces; later work also revealed a nonlinear response with heightened activation to affectively salient stimuli regardless of valence. The challenge remains to determine how such dual coding influences feelings, such as pleasure and pain, and guides goal-related behavioral responses, such as approach and avoidance.

  11. Additional factors in chronic bronchitis.

    PubMed

    Cullen, K J; Elder, J; Adams, A R; Stenhouse, N S

    1970-02-14

    A review of persons with chronic bronchitis and controls without bronchitis showed several irritants around the home that aggravated cough, such as house dust, flowers and grasses, smoke, strong fumes, hair spray, insecticide, and soap powders. Most subjects with bronchitis were affected by exposure to one or more of these irritants for at least once a day for three months of the year or more. Out of 163 subjects with chronic bronchitis only six non-smokers were free of factors associated with pulmonary irritation. This evidence from non-smokers not exposed to air pollution adds further strength to the hypothesis that daily phlegm is caused by persistent inhalation of irritants.

  12. Small GSK-3 Inhibitor Shows Efficacy in a Motor Neuron Disease Murine Model Modulating Autophagy

    PubMed Central

    de Munck, Estefanía; Palomo, Valle; Muñoz-Sáez, Emma; Perez, Daniel I.; Gómez-Miguel, Begoña; Solas, M. Teresa; Gil, Carmen; Martínez, Ana; Arahuetes, Rosa M.

    2016-01-01

    Amyotrophic lateral sclerosis (ALS) is a progressive motor neuron degenerative disease that has no effective treatment up to date. Drug discovery tasks have been hampered due to the lack of knowledge in its molecular etiology together with the limited animal models for research. Recently, a motor neuron disease animal model has been developed using β-N-methylamino-L-alanine (L-BMAA), a neurotoxic amino acid related to the appearing of ALS. In the present work, the neuroprotective role of VP2.51, a small heterocyclic GSK-3 inhibitor, is analysed in this novel murine model together with the analysis of autophagy. VP2.51 daily administration for two weeks, starting the first day after L-BMAA treatment, leads to total recovery of neurological symptoms and prevents the activation of autophagic processes in rats. These results show that the L-BMAA murine model can be used to test the efficacy of new drugs. In addition, the results confirm the therapeutic potential of GSK-3 inhibitors, and specially VP2.51, for the disease-modifying future treatment of motor neuron disorders like ALS. PMID:27631495

  13. Small GSK-3 Inhibitor Shows Efficacy in a Motor Neuron Disease Murine Model Modulating Autophagy.

    PubMed

    de Munck, Estefanía; Palomo, Valle; Muñoz-Sáez, Emma; Perez, Daniel I; Gómez-Miguel, Begoña; Solas, M Teresa; Gil, Carmen; Martínez, Ana; Arahuetes, Rosa M

    2016-01-01

    Amyotrophic lateral sclerosis (ALS) is a progressive motor neuron degenerative disease that has no effective treatment up to date. Drug discovery tasks have been hampered due to the lack of knowledge in its molecular etiology together with the limited animal models for research. Recently, a motor neuron disease animal model has been developed using β-N-methylamino-L-alanine (L-BMAA), a neurotoxic amino acid related to the appearing of ALS. In the present work, the neuroprotective role of VP2.51, a small heterocyclic GSK-3 inhibitor, is analysed in this novel murine model together with the analysis of autophagy. VP2.51 daily administration for two weeks, starting the first day after L-BMAA treatment, leads to total recovery of neurological symptoms and prevents the activation of autophagic processes in rats. These results show that the L-BMAA murine model can be used to test the efficacy of new drugs. In addition, the results confirm the therapeutic potential of GSK-3 inhibitors, and specially VP2.51, for the disease-modifying future treatment of motor neuron disorders like ALS.

  14. Statistical analyses of a screen cylinder wake

    NASA Astrophysics Data System (ADS)

    Mohd Azmi, Azlin; Zhou, Tongming; Zhou, Yu; Cheng, Liang

    2017-02-01

    The evolution of a screen cylinder wake was studied by analysing its statistical properties over a streamwise range of x/d={10-60}. The screen cylinder was made of a stainless steel screen mesh of 67% porosity. The experiments were conducted in a wind tunnel at a Reynolds number of 7000 using an X-probe. The results were compared with those obtained in the wake generated by a solid cylinder. It was observed that the evolution of the statistics in the wake of the screen cylinder was different from that of a solid cylinder, reflecting the differences in the formation of the organized large-scale vortices in both wakes. The streamwise evolution of the Reynolds stresses, energy spectra and cross-correlation coefficients indicated that there exists a critical location that differentiates the screen cylinder wake into two regions over the measured streamwise range. The formation of the fully formed large-scale vortices was delayed until this critical location. Comparison with existing results for screen strips showed that although the near-wake characteristics and the vortex formation mechanism were similar between the two wake generators, variation in the Strouhal frequencies was observed and the self-preservation states were non-universal, reconfirming the dependence of a wake on its initial condition.

  15. Trend Analyses of Nitrate in Danish Groundwater

    NASA Astrophysics Data System (ADS)

    Hansen, B.; Thorling, L.; Dalgaard, T.; Erlandsen, M.

    2012-04-01

    This presentation assesses the long-term development in the oxic groundwater nitrate concentration and nitrogen (N) loss due to intensive farming in Denmark. Firstly, up to 20-year time-series from the national groundwater monitoring network enable a statistically systematic analysis of distribution, trends and trend reversals in the groundwater nitrate concentration. Secondly, knowledge about the N surplus in Danish agriculture since 1950 is used as an indicator of the potential loss of N. Thirdly, groundwater recharge CFC (Chlorofluorocarbon) age determination allows linking of the first two dataset. The development in the nitrate concentration of oxic groundwater clearly mirrors the development in the national agricultural N surplus, and a corresponding trend reversal is found in groundwater. Regulation and technical improvements in the intensive farming in Denmark have succeeded in decreasing the N surplus by 40% since the mid 1980s while at the same time maintaining crop yields and increasing the animal production of especially pigs. Trend analyses prove that the youngest (0-15 years old) oxic groundwater shows more pronounced significant downward nitrate trends (44%) than the oldest (25-50 years old) oxic groundwater (9%). This amounts to clear evidence of the effect of reduced nitrate leaching on groundwater nitrate concentrations in Denmark. Are the Danish groundwater monitoring strategy obtimal for detection of nitrate trends? Will the nitrate concentrations in Danish groundwater continue to decrease or are the Danish nitrate concentration levels now appropriate according to the Water Framework Directive?

  16. Evaluation of the Hitachi 717 analyser.

    PubMed

    Biosca, C; Antoja, F; Sierra, C; Douezi, H; Macià, M; Alsina, M J; Galimany, R

    1989-01-01

    The selective multitest Boehringer Mannheim Hitachi 717 analyser was evaluated according to the guidelines of the Comisión de Instrumentación de la Sociedad Española de Química Clinica and the European Committee for Clinical Laboratory Standards. The evaluation was performed in two steps: examination of the analytical units and evaluation in routine operation.THE EVALUATION OF THE ANALYTICAL UNITS INCLUDED A PHOTOMETRIC STUDY: the inaccuracy is acceptable for 340 and 405 nm; the imprecision ranges from 0.12 to 0.95% at 340 nm and from 0.30 to 0.73 at 405 nm, the linearity shows some dispersion at low absorbance for NADH at 340 nm, the drift is negligible, the imprecision of the pipette delivery system increases when the sample pipette operates with 3 mul, the reagent pipette imprecision is acceptable and the temperature control system is good.UNDER ROUTINE WORKING CONDITIONS, SEVEN DETERMINATIONS WERE STUDIED: glucose, creatinine, iron, total protein, AST, ALP and calcium. The within-run imprecision (CV) ranged from 0.6% for total protein and AST to 6.9% for iron. The between run imprecision ranged from 2.4% for glucose to 9.7% for iron. Some contamination was found in the carry-over study. The relative inaccuracy is good for all the constituents assayed.

  17. Evaluation of the Olympus AU-510 analyser.

    PubMed

    Farré, C; Velasco, J; Ramón, F

    1991-01-01

    The selective multitest Olympus AU-510 analyser was evaluated according to the recommendations of the Comision de Instrumentacion de la Sociedad Española de Quimica Clinica and the European Committee for Clinical Laboratory Standards. The evaluation was carried out in two stages: an examination of the analytical units and then an evaluation in routine work conditions. The operational characteristics of the system were also studied.THE FIRST STAGE INCLUDED A PHOTOMETRIC STUDY: dependent on the absorbance, the inaccuracy varies between +0.5% to -0.6% at 405 nm and from -5.6% to 10.6% at 340 nm; the imprecision ranges between -0.22% and 0.56% at 405 nm and between 0.09% and 2.74% at 340 nm. Linearity was acceptable, apart from a very low absorbance for NADH at 340 nm; and the imprecision of the serum sample pipetter was satisfactory.TWELVE SERUM ANALYTES WERE STUDIED UNDER ROUTINE CONDITIONS: glucose, urea urate, cholesterol, triglycerides, total bilirubin, creatinine, phosphate, iron, aspartate aminotransferase, alanine aminotransferase and gamma-glutamyl transferase.The within-run imprecision (CV%) ranged from 0.67% for phosphate to 2.89% for iron and the between-run imprecision from 0.97% for total bilirubin to 7.06% for iron. There was no carryover in a study of the serum sample pipetter. Carry-over studies with the reagent and sample pipetters shows some cross contamination in the iron assay.

  18. Aviation System Analysis Capability Executive Assistant Analyses

    NASA Technical Reports Server (NTRS)

    Roberts, Eileen; Kostiuk, Peter

    1999-01-01

    This document describes the analyses that may be incorporated into the Aviation System Analysis Capability Executive Assistant. The document will be used as a discussion tool to enable NASA and other integrated aviation system entities to evaluate, discuss, and prioritize analyses.

  19. 49 CFR 1180.7 - Market analyses.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 8 2014-10-01 2014-10-01 false Market analyses. 1180.7 Section 1180.7 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT..., TRACKAGE RIGHTS, AND LEASE PROCEDURES General Acquisition Procedures § 1180.7 Market analyses. (a)...

  20. 49 CFR 1180.7 - Market analyses.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 8 2012-10-01 2012-10-01 false Market analyses. 1180.7 Section 1180.7 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT..., TRACKAGE RIGHTS, AND LEASE PROCEDURES General Acquisition Procedures § 1180.7 Market analyses. (a)...

  1. 49 CFR 1180.7 - Market analyses.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 8 2013-10-01 2013-10-01 false Market analyses. 1180.7 Section 1180.7 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT..., TRACKAGE RIGHTS, AND LEASE PROCEDURES General Acquisition Procedures § 1180.7 Market analyses. (a)...

  2. Intercomparison of eight state-of-the-art eddy covariance methane gas analysers

    NASA Astrophysics Data System (ADS)

    Peltola, Olli; Hensen, Arjan; Helfter, Carole; Belelli Marchesini, Luca; Mammarella, Ivan; Haapanala, Sami; Holst, Jutta; Elbers, Jan; Bosveld, Fred; van den Bulk, Pim; Röckmann, Thomas; Lindroth, Anders; Laurila, Tuomas; Vermeulen, Alex; Nemitz, Eiko

    2013-04-01

    During the last decade several gas analysers became available that are capable of measuring methane concentration with high sampling frequency needed for eddy covariance measurements. These new gas analysers require less maintenance compared with the models used in the 1990's and they give more reliable estimates for the ecosystem scale methane fluxes. However, with different instrument types available now, their performance should be crosscompared and validated. A gas analyser intercomparison campaign was held at Cabauw measurement station in the Netherlands between 6th and 27th of June, 2012. The campaign was organized within the InGOS FP7 project. Cabauw is well-established site with a long history in greenhouse gas monitoring and the surrounding landscape is a considerable source of methane. In total eight methane gas analysers manufactured by Picarro Inc., Los Gatos Research, Aerodyne Research Inc. and LI-COR Inc. were used in the experiment. Tentative results show relatively good agreement between the eight methane flux estimates and they also agree with previous studies done at the site. Magnitude and variation of the flux estimates are similar. Cumulative methane emissions calculated from not gapfilled data during a 10 day episode agree within 10 %, values ranging from 190 mg(CH4) m-2 to 210 mg(CH4) m-2. Comparison of random errors of the measured methane fluxes did not reveal any big differences between the instruments. Some of the gas analysers measuring methane were also capable of measuring water vapour at the same time. This is a big asset during data processing, since effect of water vapour on methane concentration measurement can then be easily corrected without need of additional water vapour measurement. The presentation will discuss the intercomparison campaign setup, instrument performance and will provide recommendations for CH4-EC measurements.

  3. Analyses of extreme swell events on La Réunion Island from microseismic noise

    NASA Astrophysics Data System (ADS)

    Davy, C.; Barruol, G.; Fontaine, F. R.; Cordier, E.

    2016-12-01

    Ocean wave activity excites seismic waves that propagate through the solid earth, known as microseisms, which, once recorded on oceanic islands, can be used to analyse the swell. Here, we analyse the microseismic noise recorded in different period ranges by the permanent seismic station RER on La Réunion Island and by a temporary network of 10 broad-band seismic stations deployed on the island to analyse extreme swell events. We perform a comparative analysis of cyclonic and austral swell events by analysing not only the primary (PM, ˜10-20 s period) and secondary (SM, ˜3-10 s) microseisms but also the long-period secondary microseisms (LPSMs, ˜ 7-10 s), which may result from the interaction between incident ocean waves and the reflected waves off the coast. We compare the microseismic observations with buoy data when available and with hindcasts from numerical ocean wave models. We show that each cyclone is characterized by its own individual signature in the SM, which depends not only on its distance and intensity but also on its dynamics and trajectory. Thus, the SM contains relevant information for cyclone detection and monitoring. Analysing the PM and the LPSM, and comparing it to direct buoy observations and/or wave numerical models allows characterizing the local impact of the swell with the island in terms of amplitude, period, and sometimes, direction of propagation, making possible to use a seismic station as an ocean wave gauge. The microseisms, which link the atmosphere, the ocean and the solid Earth, can thus provide valuable observations on extreme swell events, in addition to oceanic and meteorological data.

  4. Plasma and serum lipidomics of healthy white adults shows characteristic profiles by subjects' gender and age.

    PubMed

    Ishikawa, Masaki; Maekawa, Keiko; Saito, Kosuke; Senoo, Yuya; Urata, Masayo; Murayama, Mayumi; Tajima, Yoko; Kumagai, Yuji; Saito, Yoshiro

    2014-01-01

    Blood is a commonly used biofluid for biomarker discovery. Although blood lipid metabolites are considered to be potential biomarker candidates, their fundamental properties are not well characterized. We aimed to (1) investigate the matrix type (serum vs. plasma) that may be preferable for lipid biomarker exploration, (2) elucidate age- and gender-associated differences in lipid metabolite levels, and (3) examine the stability of lipid metabolites in matrix samples subjected to repeated freeze-thaw cycles. Using liquid chromatography-mass spectrometry, we performed lipidomic analyses for fasting plasma and serum samples for four groups (15 subjects/group) of young and elderly (25-34 and 55-64 years old, respectively) males and females and for an additional aliquot of samples from young males, which were subjected to repeated freeze-thaw cycles. Lysophosphatidylcholine and diacylglycerol levels were higher in serum than in plasma samples, suggesting that the clotting process influences serum lipid metabolite levels. Gender-associated differences highlighted that the levels of many sphingomyelin species were significantly higher in females than in males, irrespective of age and matrix (plasma and serum). Age-associated differences were more prominent in females than in males, and in both matrices, levels of many triacylglycerols were significantly higher in elderly females than in young females. Plasma and serum levels of most lipid metabolites were reduced by freeze-thawing. Our results indicate that plasma is an optimal matrix for exploring lipid biomarkers because it represents the original properties of an individual's blood sample. In addition, the levels of some blood lipid species of healthy adults showed gender- and age-associated differences; thus, this should be considered during biomarker exploration and its application in diagnostics. Our fundamental findings on sample selection and handling procedures for measuring blood lipid metabolites is important

  5. Evolution of solidification texture during additive manufacturing

    PubMed Central

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-01-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components. PMID:26553246

  6. p53 and rapamycin are additive

    PubMed Central

    Campisi, Judith; Huang, Jing; Jones, Diane; Dodds, Sherry G.; Williams, Charnae; Hubbard, Gene; Livi, Carolina B.; Gao, Xiaoli; Weintraub, Susan; Curiel, Tyler; Sharp, Z. Dave; Hasty, Paul

    2015-01-01

    Mechanistic target of rapamycin (mTOR) is a kinase found in a complex (mTORC1) that enables macromolecular synthesis and cell growth and is implicated in cancer etiology. The rapamycin-FK506 binding protein 12 (FKBP12) complex allosterically inhibits mTORC1. In response to stress, p53 inhibits mTORC1 through a separate pathway involving cell signaling and amino acid sensing. Thus, these different mechanisms could be additive. Here we show that p53 improved the ability of rapamycin to: 1) extend mouse life span, 2) suppress ionizing radiation (IR)-induced senescence-associated secretory phenotype (SASP) and 3) increase the levels of amino acids and citric acid in mouse embryonic stem (ES) cells. This additive effect could have implications for cancer treatment since rapamycin and p53 are anti-oncogenic. PMID:26158292

  7. Evolution of solidification texture during additive manufacturing

    DOE PAGES

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numericalmore » modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.« less

  8. Evolution of solidification texture during additive manufacturing

    SciTech Connect

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  9. Weldability of Additive Manufactured Stainless Steel

    NASA Astrophysics Data System (ADS)

    Matilainen, Ville-Pekka; Pekkarinen, Joonas; Salminen, Antti

    Part size in additive manufacturing is limited by the size of building area of AM equipment. Occasionally, larger constructions that AM machines are able to produce, are needed, and this creates demand for welding AM parts together. However there is very little information on welding of additive manufactured stainless steels. The aim of this study was to investigate the weldability aspects of AM material. In this study, comparison of the bead on plate welds between AM parts and sheet metal parts is done. Used material was 316L stainless steel, AM and sheet metal, and parts were welded with laser welding. Weld quality was evaluated visually from macroscopic images. Results show that there are certain differences in the welds in AM parts compared to the welds in sheet metal parts. Differences were found in penetration depths and in type of welding defects. Nevertheless, this study presents that laser welding is suitable process for welding AM parts.

  10. Evolution of solidification texture during additive manufacturing.

    PubMed

    Wei, H L; Mazumder, J; DebRoy, T

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  11. Evolution of solidification texture during additive manufacturing

    NASA Astrophysics Data System (ADS)

    Wei, H. L.; Mazumder, J.; Debroy, T.

    2015-11-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  12. Finite Element analyses of soil bioengineered slopes

    NASA Astrophysics Data System (ADS)

    Tamagnini, Roberto; Switala, Barbara Maria; Sudan Acharya, Madhu; Wu, Wei; Graf, Frank; Auer, Michael; te Kamp, Lothar

    2014-05-01

    Soil Bioengineering methods are not only effective from an economical point of view, but they are also interesting as fully ecological solutions. The presented project is aimed to define a numerical model which includes the impact of vegetation on slope stability, considering both mechanical and hydrological effects. In this project, a constitutive model has been developed that accounts for the multi-phase nature of the soil, namely the partly saturated condition and it also includes the effects of a biological component. The constitutive equation is implemented in the Finite Element (FE) software Comes-Geo with an implicit integration scheme that accounts for the collapse of the soils structure due to wetting. The mathematical formulation of the constitutive equations is introduced by means of thermodynamics and it simulates the growth of the biological system during the time. The numerical code is then applied in the analysis of an ideal rainfall induced landslide. The slope is analyzed for vegetated and non-vegetated conditions. The final results allow to quantitatively assessing the impact of vegetation on slope stability. This allows drawing conclusions and choosing whenever it is worthful to use soil bioengineering methods in slope stabilization instead of traditional approaches. The application of the FE methods show some advantages with respect to the commonly used limit equilibrium analyses, because it can account for the real coupled strain-diffusion nature of the problem. The mechanical strength of roots is in fact influenced by the stress evolution into the slope. Moreover, FE method does not need a pre-definition of any failure surface. FE method can also be used in monitoring the progressive failure of the soil bio-engineered system as it calculates the amount of displacements and strains of the model slope. The preliminary study results show that the formulated equations can be useful for analysis and evaluation of different soil bio

  13. Adverse cognitive effects of antiepileptic pharmacotherapy: Each additional drug matters.

    PubMed

    Witt, Juri-Alexander; Elger, Christian E; Helmstaedter, Christoph

    2015-11-01

    The study was set up to evaluate the impact of the total drug load of antiepileptic pharmacotherapy on cognition. Retrospective analyses were based on 834 patients with epilepsy who underwent a brief routine assessment of executive function and verbal memory (EpiTrack Plus) at our department. The total drug load was quantified in two ways: (1) number of concurrent antiepileptic drugs (AEDs) and (2) total drug load according to the defined daily dose (DDD) provided by the World Health Organization. The cognitive measures showed higher inverse correlations with the number of AEDs (executive function: r=-0.35, p<0.001; memory: r=-0.22, p<0.001) than with the total DDD (executive function: r=-0.27, p<0.001; memory: r=-0.17, p<0.001). Reanalysis with statistical control for disease severity hardly changed the aforementioned results. With each additional drug in polytherapy, we observed a significantly lower performance in executive function. In this regard an additional explorative approach revealed that regimens combining AEDs with favorable cognitive profiles were associated with higher cognitive performance. Correlations between indicators of disease severity and drug load indices were low: altogether explaining only up to 9% of the observed variance in drug load. The findings demonstrate a considerable adverse effect of a higher drug load on cognition, especially on executive functions. Simply counting the number of drugs may be sufficient as a rough estimate of the risk of side effects. However, the combination of AEDs with favorable cognitive profiles may attenuate the negative effect of the total drug load.

  14. Additives In Meat and Poultry Products

    MedlinePlus

    ... What is a food additive? What is a "direct" food additive? What is an 'indirect" food additive? ... convenience foods. [ Top of Page ] What is a “direct” food additive? According to the FDA, “Direct food ...

  15. Additional EIPC Study Analysis. Final Report

    SciTech Connect

    Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  16. Additional considerations on electrolysis in electromembrane extraction.

    PubMed

    Šlampová, Andrea; Kubáň, Pavel; Boček, Petr

    2016-01-15

    Optimized acceptor solutions, which eliminate electrolytically induced variations in their pH values, have been shown to improve electromembrane extraction (EME) performance. Acceptor solutions containing 500 mM formic acid (pH 1.97) ensured stable EME process for three basic drugs extracted at 50 V across 1-ethyl-2-nitrobenzene and constant extraction recoveries (66-89%) were achieved for 40-80 min EMEs. Back-extraction of analytes into donor solutions has been eliminated by application of optimized acceptor solutions, moreover, saturation of acceptor solutions with analytes had no additional effect on their back-extraction; the presence of up to 300-fold excess of analytes in optimized acceptor solutions led to slightly reduced but stable enrichment of analytes over the entire extraction time. Stable EME performance has been also achieved for extractions into 100mM HCl, note however, that seriously compromised performance of subsequent capillary electrophoretic analyses has been observed due to high conductivities of resulting acceptor solutions. Electrolytically produced H(+) and OH(-) ions have mostly remained in corresponding operating solutions, have determined their final pH values and have not been subjects of EME transfers across selective phase interfaces as was experimentally verified by pH measurements of anolytes and catholytes at various EME times.

  17. Overlapping meta-analyses on the same topic: survey of published studies

    PubMed Central

    Siontis, Konstantinos C; Hernandez-Boussard, Tina

    2013-01-01

    Objective To assess how common it is to have multiple overlapping meta-analyses of randomized trials published on the same topic. Design Survey of published meta-analyses. Data sources PubMed. Study selection and methods Meta-analyses published in 2010 were identified, and 5% of them were randomly selected. We further selected those that included randomized trials and examined effectiveness of any medical intervention. For eligible meta-analyses, we searched for other meta-analyses on the same topic (covering the same comparisons, indications/settings, and outcomes or overlapping subsets of them) published until February 2013. Results Of 73 eligible meta-analyses published in 2010, 49 (67%) had at least one other overlapping meta-analysis (median two meta-analyses per topic, interquartile range 1-4, maximum 13). In 17 topics at least one author was involved in at least two of the overlapping meta-analyses. No characteristics of the index meta-analyses were associated with the potential for overlapping meta-analyses. Among pairs of overlapping meta-analyses in 20 randomly selected topics, 13 of the more recent meta-analyses did not include any additional outcomes. In three of the four topics with eight or more published meta-analyses, many meta-analyses examined only a subset of the eligible interventions or indications/settings covered by the index meta-analysis. Conversely, for statins in the prevention of atrial fibrillation after cardiac surgery, 11 meta-analyses were published with similar eligibility criteria for interventions and setting: there was still variability on which studies were included, but the results were always similar or even identical across meta-analyses. Conclusions While some independent replication of meta-analyses by different teams is possibly useful, the overall picture suggests that there is a waste of efforts with many topics covered by multiple overlapping meta-analyses. PMID:23873947

  18. A novel nucleic acid analogue shows strong angiogenic activity

    SciTech Connect

    Tsukamoto, Ikuko; Sakakibara, Norikazu; Maruyama, Tokumi; Igarashi, Junsuke; Kosaka, Hiroaki; Kubota, Yasuo; Tokuda, Masaaki; Ashino, Hiromi; Hattori, Kenichi; Tanaka, Shinji; Kawata, Mitsuhiro; Konishi, Ryoji

    2010-09-03

    Research highlights: {yields} A novel nucleic acid analogue (2Cl-C.OXT-A, m.w. 284) showed angiogenic potency. {yields} It stimulated the tube formation, proliferation and migration of HUVEC in vitro. {yields} 2Cl-C.OXT-A induced the activation of ERK1/2 and MEK in HUVEC. {yields} Angiogenic potency in vivo was confirmed in CAM assay and rabbit cornea assay. {yields} A synthesized small angiogenic agent would have great clinical therapeutic value. -- Abstract: A novel nucleic acid analogue (2Cl-C.OXT-A) significantly stimulated tube formation of human umbilical endothelial cells (HUVEC). Its maximum potency at 100 {mu}M was stronger than that of vascular endothelial growth factor (VEGF), a positive control. At this concentration, 2Cl-C.OXT-A moderately stimulated proliferation as well as migration of HUVEC. To gain mechanistic insights how 2Cl-C.OXT-A promotes angiogenic responses in HUVEC, we performed immunoblot analyses using phospho-specific antibodies as probes. 2Cl-C.OXT-A induced robust phosphorylation/activation of MAP kinase ERK1/2 and an upstream MAP kinase kinase MEK. Conversely, a MEK inhibitor PD98059 abolished ERK1/2 activation and tube formation both enhanced by 2Cl-C.OXT-A. In contrast, MAP kinase responses elicited by 2Cl-C.OXT-A were not inhibited by SU5416, a specific inhibitor of VEGF receptor tyrosine kinase. Collectively these results suggest that 2Cl-C.OXT-A-induces angiogenic responses in HUVEC mediated by a MAP kinase cascade comprising MEK and ERK1/2, but independently of VEGF receptor tyrosine kinase. In vivo assay using chicken chorioallantoic membrane (CAM) and rabbit cornea also suggested the angiogenic potency of 2Cl-C.OXT-A.

  19. PIXE and RBS elemental analyses of tree rings from Mexico Basin forests as a record of pollution

    NASA Astrophysics Data System (ADS)

    Miranda, J.; Calva-Vásquez, G.; Solís, C.; Huerta, L.

    2003-08-01

    Particle induced X-ray emission (PÏXE) and Rutherford backscattering (RBS) elemental analyses of tree rings and soils from forests around the Mexico City Metropolitan Area (MCMA) were performed. The aim was to estimate the impact of pollution on the forests. Cores from Pinus montezumae and Abies religiosa trees, in four forests around the MCMA (Desierto de los Leones, Iztapopocatépetl, Villa del Carbón and Zoquiapan) and a reference site (El Chico). Differences were observed in samples from the different forests, showing higher values in the areas closest to the MCMA. A correlation of several elements with ring width was found using cluster analysis. Additionally, soil analyses from different depths in the forests were carried out, trying to relate the elemental concentrations measured in the tree rings with cation mobility. In this case, samples taken in 1993 and 1999 were analyzed, showing elemental mobility to the various depths.

  20. Comparison of retrospective analyses of the global ocean heat content

    NASA Astrophysics Data System (ADS)

    Chepurin, Gennady A.; Carton, James A.

    1999-07-01

    In this study, we compare seven retrospective analyses of basin- to global-scale upper ocean temperature. The analyses span a minimum of 10 years during the 50-year period since World War II. Three of the analyses (WOA-94, WHITE, BMRC) are based on objective analysis and thus, do not rely on a numerical forecast model. The remaining four (NCEP, WAJSOWICZ, ROSATI, SODA) are based on data assimilation in which the numerical forecast is provided by some form of the Geophysical Fluid Dynamics Laboratory Modular Ocean Model driven by historical winds. The comparison presented here is limited to heat content in the upper 250 m, information that is available for all analyses. The results are presented in three frequency bands: seasonal, interannual (periods of 1-5 years), and decadal (periods of 5-25 years). At seasonal frequencies, all of the analyses are quite similar. Otherwise, the differences among analyses are limited to the regions of the western boundary currents, and some regions in the Southern Hemisphere. At interannual frequencies, significant differences appear between the objective analyses and the data assimilation analyses. Along the equator in the Pacific, where variability is dominated by El Niño, the objective analyses have somewhat noisier fields, as well as reduced variance prior to 1980 due to lack of observations. Still, the correlation among analyses generally exceeds 80% in this region. Along the equator in the Atlantic, the correlation is lower (30-60%) although inspection of the time series shows that the same biennial progression of warm and cool events appears in all analyses since 1980. In the midlatitude Pacific agreement among objective analyses and data assimilation analyses is good. The analysis of Rosati et al. [Rosati, A., Gudgel, R., Miyakoda, K., 1995. Decadal analysis produced from an ocean assimilation system. Mon. Weather Rev., 123, 2, 206.] differs somewhat from the others apparently because in this analysis, the forecast model

  1. Afghanistan Drawdown Preparations: DOD Decision Makers Need Additional Analyses to Determine Costs and Benefits of Returning Excess Equipment

    DTIC Science & Technology

    2012-12-19

    Major end items are equipment that is important to operational readiness such as aircraft; boats; motorized wheeled , tracked, and towed vehicles...Process (cont.) Loader , Scoop Type (July 2012 Playbook, p. 292) There are155 Marine Corps Scoop Type Loaders in Afghanistan, all of which are... loaders are determined to be excess when the disposition instructions are issued, the transportation cost for the return of these loaders could range

  2. Report: Additional Analyses of Mercury Emissions Needed Before EPA Finalizes Rules for Coal-Fired Electric Utilities

    EPA Pesticide Factsheets

    Report #2005-P-00003, February 3, 2005. Evidence indicates that EPA senior management instructed EPA staff to develop a Maximum Achievable Control Technology (MACT) standard for mercury that would result in national emissions of 34 tons annually.

  3. Level II Ergonomic Analyses, Dover AFB, DE

    DTIC Science & Technology

    1999-02-01

    IERA-RS-BR-TR-1999-0002 UNITED STATES AIR FORCE IERA Level II Ergonomie Analyses, Dover AFB, DE Andrew Marcotte Marilyn Joyce The Joyce...Project (070401881, Washington, DC 20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE 4. TITLE AND SUBTITLE Level II Ergonomie Analyses, Dover...1.0 INTRODUCTION 1-1 1.1 Purpose Of The Level II Ergonomie Analyses : 1-1 1.2 Approach 1-1 1.2.1 Initial Shop Selection and Administration of the

  4. Zircon U-Pb analyses by TIMS and LA-ICPMS on the same material

    NASA Astrophysics Data System (ADS)

    Mundil, R.; Gehrels, G.; Deino, A. L.; Irmis, R. B.

    2008-12-01

    A number of U-Pb geochronological techniques are now available, each of which has pros and cons associated with spatial resolution, accuracy, precision and also operating cost and throughput. Zircon U-Pb age analyses using TIMS (Thermal Ionization Mass Spectrometry) can yield geological dates with uncertainties at or below the 1 permil level (precision and accuracy), but consume relatively large amounts of material (entire crystals of fragments) and are cost and time intensive. Conversely, LA-ICPMS (Laser Ablation Inductively Coupled Plasma Mass Spectrometry) geochronology is a relatively inexpensive and fast micro-sampling technique, but individual and combined uncertainties are significantly greater. The choice of a specific approach depends primarily on the nature of the geological problem; a combination of several techniques is often advisable. We present new TIMS and LA-ICPMS results on zircons from an intraformational conglomerate within the Chinle Fm (Late Triassic), and from a volcanic ash within the Late Jurassic Morrison Fm (with additional 40Ar/39Ar analyses on phenocrystic sanidine). Preliminary TIMS analyses on annealed and chemically abraded zircons from the Chinle Fm conglomerate indicate an age of ca 215.3 ± 0.9 Ma (further analyses are expected to reduce the uncertainty significantly). Previous analyses using LA-ICPMS techniques on non-polished zircons yield an age which is significantly younger (212 ± 1.5 Ma). TIMS analyses were done on the same crystals as the LA-ICPMS analyses, only one of four crystals yields an overlapping age with the ICPMS date (most of the TIMS ages are older than the corresponding LA-ICPMS ages). Part of this discrepancy may be due the fact that the LA-ICP ages preferentially suffer from surface correlated Pb loss. This effect may be mitigated by LA-ICPMS analyses on polished crystals; however, it has been shown that Pb loss also occurs within the crystal interior. Zircons from the Morrison show a similar bias in sense

  5. Phylogenomic analysis shows that ‘Bacillus vanillea’ is a later heterotypic synonym of Bacillus siamensis.

    PubMed

    Dunlap, Christopher A

    2015-10-01

    ‘Bacillus vanillea’ XY18 ( = CGMCC 8629 = NCCB 100507) was isolated from cured vanilla beans and involved in the formation of vanilla aroma compounds. A draft genome of this strain was assembled and yielded a length of 3.71 Mbp with a DNA G+C content of 46.3 mol%. Comparative genomic analysis with its nearest relatives showed only minor differences between this strain and the genome of the Bacillus siamensis KCTC 13613T ( = BCC 22614T = KACC 16244T), with a calculated DNA–DNA hybridization (DDH) value of 91.2 % and an average nucleotide identity (ANI) of 98.9 %. This DDH value is well above the recommended 70 % threshold for species delineation, as well as the ANI threshold of 95 %. In addition, the results of morphological, physiological, chemotaxonomic and phylogenetic analyses indicate that the type strains of these two taxa are highly similar with phenotype coherence. A core genome multi-locus sequencing analysis was conducted for the strains and the results show that ‘Bacillus vanillea’ XY18 clusters closely to the type strain of Bacillus siamensis. Therefore, it is proposed that the species ‘Bacillus vanillea’ XY18 ( = CGMCC 8629 = NCCB 100507) should be reclassified as a later heterotypic synonym of Bacillus siamensis KCTC 13613T ( = BCC 22614T = KACC 16244T). An emended description of Bacillus siamensis is provided.

  6. Evaluation of MELCOR improvements: Peach Bottom station blackout analyses

    SciTech Connect

    Madni, I.K.

    1993-12-31

    Long-term station blackout analyses in Peach Bottom were first carried out using MELCOR 1.8BC, and later with 1.8DN, as part of an overall program between the US Nuclear Regulatory Commission (NRC) and Brookhaven National Laboratory (BNL), to provide independent assessment of MELCOR as a severe accident/source term analysis tool. In addition to the reference MELCOR calculation, several sensitivity calculations were also performed to explore the impact of varying user-input modeling and timestep control parameters on the accident progression and radionuclide releases to the environment calculated by MELCOR. An area of concern that emerged from these studies was the impact of the selection of maximum allowable timestep ({Delta}t{sub max}) on the calculational behavior of MELCOR, where the results showed significant differences in timing of key events, and a lack of convergence of the solution with reduction of {Delta}t{sub max}. These findings were reported to the NRC, SNL, and the MELCOR Peer Review Committee. As a consequence, a significant effort was undertaken to eliminate or mitigate these sensitivities. The latest released version of MELCOR, Version 1.8.2, released in April 1993, contains several new or improved models, and has corrections to mitigate numerical sensitivities. This paper presents the results of updating the earlier sensitivity studies on maximum timestep, to more properly represent the abilities of the improved MELCOR version 1.8.2. Results are presenter in terms of timing of key events, thermal-hydraulic response of the system, and environmental release of radionuclides. The impact of some of the newer models, such as falling debris quench model, and ORNL`s new BH model, is also evaluated.

  7. Exergetic, thermal, and externalities analyses of a cogeneration plant

    SciTech Connect

    Bailey, M.B.; Curtiss, P.; Blanton, P.H.; McBrayer, T.B.

    2006-02-15

    A thermodynamic study of an 88.4 MW cogeneration plant located in the United States is presented in this paper. The feedstock for this actual plant is culm, the waste left from anthracite coal mining. Before combustion in circulating fluidized bed boilers, the usable carbon within the culm is separated from the indigenous rock. The rock and ash waste from the combustion process fill adjacent land previously scared by strip mining. Trees and grass are planted in these areas as part of a land reclamation program. Analyses based on the first and second laws of thermodynamics using actual operating data are first presented to acquaint the reader with the plant's components and operation. Using emission and other relevant environmental data from the plant, all externalities study is outlined that estimates the plant's effect on the local population. The results show that the plant's cycle performs with a coefficient of utilization of 29% and all approximate exergetic efficiency of 34.5%. In order to increase these values, recommended improvements to the plant are noted. In addition, the externality costs associated with the estimated SO{sub 2} and NOx discharge from the culm fed plant are lower (85-95%) than those associated with a similarly sized coal fed plant. The plant's cycle efficiencies are lower than those associated with more modern technologies; such as all integrated gas turbine combined cycle. However, given the abundant, inexpensive supply of feedstock located adjacent to the plant and the environmental benefit of removing culm banks, the plant's existing operation is unique from an economical and environmental viewpoint.

  8. Integrated Field Analyses of Thermal Springs

    NASA Astrophysics Data System (ADS)

    Shervais, K.; Young, B.; Ponce-Zepeda, M. M.; Rosove, S.

    2011-12-01

    A group of undergraduate researchers through the SURE internship offered by the Southern California Earthquake Center (SCEC) have examined thermal springs in southern Idaho, northern Utah as well as mud volcanoes in the Salton Sea, California. We used an integrated approach to estimate the setting and maximum temperature, including water chemistry, Ipad-based image and data-base management, microbiology, and gas analyses with a modified Giggenbach sampler.All springs were characterized using GISRoam (tmCogent3D). We are performing geothermometry calculations as well as comparisons with temperature gradient data on the results while also analyzing biological samples. Analyses include water temperature, pH, electrical conductivity, and TDS measured in the field. Each sample is sealed and chilled and delivered to a water lab within 12 hours.Temperatures are continuously monitored with the use of Solinst Levelogger Juniors. Through partnership with a local community college geology club, we receive results on a monthly basis and are able to process initial data earlier in order to evaluate data over a longer time span. The springs and mudpots contained microbial organisms which were analyzed using methods of single colony isolation, polymerase chain reaction, and DNA sequencing showing the impact of the organisms on the springs or vice versa. Soon we we will collect gas samples at sites that show signs of gas. This will be taken using a hybrid of the Giggenbach method and our own methods. Drawing gas samples has proven a challenge, however we devised a method to draw out gas samples utilizing the Giggenbach flask, transferring samples to glass blood sample tubes, replacing NaOH in the Giggenbach flask, and evacuating it in the field for multiple samples using a vacuum pump. We also use a floating platform devised to carry and lower a levelogger, to using an in-line fuel filter from a tractor in order to keep mud from contaminating the equipment.The use of raster

  9. Interactive graphics for functional data analyses.

    PubMed

    Wrobel, Julia; Park, So Young; Staicu, Ana Maria; Goldsmith, Jeff

    Although there are established graphics that accompany the most common functional data analyses, generating these graphics for each dataset and analysis can be cumbersome and time consuming. Often, the barriers to visualization inhibit useful exploratory data analyses and prevent the development of intuition for a method and its application to a particular dataset. The refund.shiny package was developed to address these issues for several of the most common functional data analyses. After conducting an analysis, the plot shiny() function is used to generate an interactive visualization environment that contains several distinct graphics, many of which are updated in response to user input. These visualizations reduce the burden of exploratory analyses and can serve as a useful tool for the communication of results to non-statisticians.

  10. Quality control considerations in performing washability analyses

    SciTech Connect

    Graham, R.D.

    1984-10-01

    The author describes, in considerable detail, the procedures for carrying out washability analyses as laid down in ASTM Standard Test Method D4371. These include sampling, sample preparation, hydrometer standardisation, washability testing, and analysis of specific gravity fractions.

  11. SCM Forcing Data Derived from NWP Analyses

    DOE Data Explorer

    Jakob, Christian

    2008-01-15

    Forcing data, suitable for use with single column models (SCMs) and cloud resolving models (CRMs), have been derived from NWP analyses for the ARM (Atmospheric Radiation Measurement) Tropical Western Pacific (TWP) sites of Manus Island and Nauru.

  12. Anthocyanin analyses of Vaccinium fruit dietary supplements

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Vaccinium fruit ingredients within dietary supplements were identified by comparisons with anthocyanin analyses of known Vaccinium profiles (demonstration of anthocyanin fingerprinting). Available Vaccinium supplements were purchased and analyzed; their anthocyanin profiles (based on HPLC separation...

  13. Comparison with Russian analyses of meteor impact

    SciTech Connect

    Canavan, G.H.

    1997-06-01

    The inversion model for meteor impacts is used to discuss Russian analyses and compare principal results. For common input parameters, the models produce consistent estimates of impactor parameters. Directions for future research are discussed and prioritized.

  14. 49 CFR 1572.107 - Other analyses.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ASSESSMENTS Standards for Security Threat Assessments § 1572.107 Other analyses. (a) TSA may determine that an... the search conducted under this part reveals extensive foreign or domestic criminal convictions,...

  15. Assessing the reproducibility of discriminant function analyses

    PubMed Central

    Andrew, Rose L.; Albert, Arianne Y.K.; Renaut, Sebastien; Rennison, Diana J.; Bock, Dan G.

    2015-01-01

    Data are the foundation of empirical research, yet all too often the datasets underlying published papers are unavailable, incorrect, or poorly curated. This is a serious issue, because future researchers are then unable to validate published results or reuse data to explore new ideas and hypotheses. Even if data files are securely stored and accessible, they must also be accompanied by accurate labels and identifiers. To assess how often problems with metadata or data curation affect the reproducibility of published results, we attempted to reproduce Discriminant Function Analyses (DFAs) from the field of organismal biology. DFA is a commonly used statistical analysis that has changed little since its inception almost eight decades ago, and therefore provides an opportunity to test reproducibility among datasets of varying ages. Out of 100 papers we initially surveyed, fourteen were excluded because they did not present the common types of quantitative result from their DFA or gave insufficient details of their DFA. Of the remaining 86 datasets, there were 15 cases for which we were unable to confidently relate the dataset we received to the one used in the published analysis. The reasons ranged from incomprehensible or absent variable labels, the DFA being performed on an unspecified subset of the data, or the dataset we received being incomplete. We focused on reproducing three common summary statistics from DFAs: the percent variance explained, the percentage correctly assigned and the largest discriminant function coefficient. The reproducibility of the first two was fairly high (20 of 26, and 44 of 60 datasets, respectively), whereas our success rate with the discriminant function coefficients was lower (15 of 26 datasets). When considering all three summary statistics, we were able to completely reproduce 46 (65%) of 71 datasets. While our results show that a majority of studies are reproducible, they highlight the fact that many studies still are not the

  16. Soil grain analyses at Meridiani Planum, Mars

    USGS Publications Warehouse

    Weitz, C.M.; Anderson, R.C.; Bell, J.F.; Farrand, W. H.; Herkenhoff, K. E.; Johnson, J. R.; Jolliff, B.L.; Morris, R.V.; Squyres, S. W.; Sullivan, R.J.

    2006-01-01

    Grain-size analyses of the soils at Meridiani Planum have been used to identify rock souces for the grains and provide information about depositional processes under past and current conditions. Basaltic sand, dust, millimeter-size hematite-rich spherules interpreted as concretions, spherule fragments, coated partially buried spherules, basalt fragments, sedimentary outcrop fragments, and centimeter-size cobbles are concentrated on the upper surfaces of the soils as a lag deposit, while finer basaltic sands and dust dominate the underlying soils. There is a bimodal distribution of soil grain sizes with one population representing grains <125 ??m and the other falling between 1-4.5 mm. Soils within craters like Eagle and Endurance show a much greater diversity of grain morphologies compared to the plains. The spherules found in the plains soils are approximately 1-2 mm smaller in size than those seen embedded in the outcrop rocks of Eagle and Endurance craters. The average major axis for all unfractured spherules measured in the soils and outcrop rocks is 2.87 ?? 1.18 mm, with a trend toward decreasing spherule sizes in both the soils and outcrop rocks as the rover drove southward. Wind ripples seen across the plains of Meridiani are dominated by similar size (1.3-1.7 mm) hematite-rich grains, and they match in size the larger grains on plains ripples at Gusev Crater. Larger clasts and centimeter-size cobbles that are scattered on the soils have several spectral and compositional types, reflecting multiple origins. The cobbles tend to concentrate within ripple troughs along the plains and in association with outcrop exposures. Copyright 2006 by the American Geophysical Union.

  17. A History of Rotorcraft Comprehensive Analyses

    NASA Technical Reports Server (NTRS)

    Johnson, Wayne

    2013-01-01

    A history of the development of rotorcraft comprehensive analyses is presented. Comprehensive analyses are digital computer programs that calculate the aeromechanical behavior of the rotor and aircraft, bringing together the most advanced models of the geometry, structure, dynamics, and aerodynamics available in rotary wing technology. The development of the major codes of the last five decades from industry, government, and universities is described. A number of common themes observed in this history are discussed.

  18. Analyses and forecasts with LAWS winds

    NASA Technical Reports Server (NTRS)

    Wang, Muyin; Paegle, Jan

    1994-01-01

    Horizontal fluxes of atmospheric water vapor are studied for summer months during 1989 and 1992 over North and South America based on analyses from European Center for Medium Range Weather Forecasts, US National Meteorological Center, and United Kingdom Meteorological Office. The calculations are performed over 20 deg by 20 deg box-shaped midlatitude domains located to the east of the Rocky Mountains in North America, and to the east of the Andes Mountains in South America. The fluxes are determined from operational center gridded analyses of wind and moisture. Differences in the monthly mean moisture flux divergence determined from these analyses are as large as 7 cm/month precipitable water equivalent over South America, and 3 cm/month over North America. Gridded analyses at higher spatial and temporal resolution exhibit better agreement in the moisture budget study. However, significant discrepancies of the moisture flux divergence computed from different gridded analyses still exist. The conclusion is more pessimistic than Rasmusson's estimate based on station data. Further analysis reveals that the most significant sources of error result from model surface elevation fields, gaps in the data archive, and uncertainties in the wind and specific humidity analyses. Uncertainties in the wind analyses are the most important problem. The low-level jets, in particular, are substantially different in the different data archives. Part of the reason for this may be due to the way the different analysis models parameterized physical processes affecting low-level jets. The results support the inference that the noise/signal ratio of the moisture budget may be improved more rapidly by providing better wind observations and analyses than by providing better moisture data.

  19. Studies of levels of biogenic amines in meat samples in relation to the content of additives.

    PubMed

    Jastrzębska, Aneta; Kowalska, Sylwia; Szłyk, Edward

    2016-01-01

    The impact of meat additives on the concentration of biogenic amines and the quality of meat was studied. Fresh white and red meat samples were fortified with the following food additives: citric and lactic acids, disodium diphosphate, sodium nitrite, sodium metabisulphite, potassium sorbate, sodium chloride, ascorbic acid, α-tocopherol, propyl 3,4,5-trihydroxybenzoate (propyl gallate) and butylated hydroxyanisole. The content of spermine, spermidine, putrescine, cadaverine, histamine, tyramine, tryptamine and 2-phenylethylamine was determined by capillary isotachophoretic methods in meat samples (fresh and fortified) during four days of storage at 4°C. The results were applied to estimate the impact of the tested additives on the formation of biogenic amines in white and red meat. For all tested meats, sodium nitrite, sodium chloride and disodium diphosphate showed the best inhibition. However, cadaverine and putrescine were characterised by the biggest changes in concentration during the storage time of all the additives. Based on the presented data for the content of biogenic amines in meat samples analysed as a function of storage time and additives, we suggest that cadaverine and putrescine have a significant impact on meat quality.

  20. Nonlinear Thermal Analyses of a Liquid Hydrogen Tank Wall

    NASA Technical Reports Server (NTRS)

    Smeltzer, Stanley S., III; Waters, W. Allen, Jr.

    2003-01-01

    A thermal evaluation of a composite tank wall design for a liquid hydrogen tank was performed in the present study. The primary focus of the current effort was to perform one-dimensional, temperature nonlinear, transient thermal analyses to determine the through-the-thickness temperature profiles. These profiles were used to identify critical points within the flight envelope that could have detrimental effects on the adhesive bondlines used in the construction of the tank wall. Additionally, this paper presents the finite element models, analysis strategies, and thermal analysis results that were determined for several vehicle flight conditions. The basic tank wall configuration used to perform the thermal analyses consisted of carbon-epoxy facesheets and a Korex honeycomb core sandwich that was insulated with an Airex cryogenic foam and an Alumina Enhanced Thermal Barrier (AETB-12). Nonlinear, transient thermal analyses were conducted using the ABAQUS finite element code. Tank wall models at a windward side location on the fuel tank were analyzed for three basic flight conditions: cold-soak (ground-hold), ascent, and re-entry. Additionally, three ambient temperature boundary conditions were applied to the tank wall for the cold-soak condition, which simulated the launch pad cooldown process. Time-dependent heating rates were used in the analyses of the ascent and reentry segments of the flight history along with temperature dependent material properties. The steady-state through-the-thickness temperature profile from the cold-soak condition was used as the initial condition for the ascent analyses. Results from the nonlinear thermal analyses demonstrated very good correlation with results from similar models evaluated by Northrop- Grumman using a different analysis tool. Wall through-the-thickness temperature gradients as a function of flight time were obtained for future incorporation into a full-scale thermostructural analysis to evaluate the adhesive bondlines

  1. The ASSET intercomparison of ozone analyses: method and first results

    NASA Astrophysics Data System (ADS)

    Geer, A. J.; Lahoz, W. A.; Bekki, S.; Bormann, N.; Errera, Q.; Eskes, H. J.; Fonteyn, D.; Jackson, D. R.; Juckes, M. N.; Massart, S.; Peuch, V.-H.; Rharmili, S.; Segers, A.

    2006-12-01

    This paper aims to summarise the current performance of ozone data assimilation (DA) systems, to show where they can be improved, and to quantify their errors. It examines 11 sets of ozone analyses from 7 different DA systems. Two are numerical weather prediction (NWP) systems based on general circulation models (GCMs); the other five use chemistry transport models (CTMs). The systems examined contain either linearised or detailed ozone chemistry, or no chemistry at all. In most analyses, MIPAS (Michelson Interferometer for Passive Atmospheric Sounding) ozone data are assimilated; two assimilate SCIAMACHY (Scanning Imaging Absorption Spectrometer for Atmospheric Chartography) observations instead. Analyses are compared to independent ozone observations covering the troposphere, stratosphere and lower mesosphere during the period July to November 2003. Biases and standard deviations are largest, and show the largest divergence between systems, in the troposphere, in the upper-troposphere/lower-stratosphere, in the upper-stratosphere and mesosphere, and the Antarctic ozone hole region. However, in any particular area, apart from the troposphere, at least one system can be found that agrees well with independent data. In general, none of the differences can be linked to the assimilation technique (Kalman filter, three or four dimensional variational methods, direct inversion) or the system (CTM or NWP system). Where results diverge, a main explanation is the way ozone is modelled. It is important to correctly model transport at the tropical tropopause, to avoid positive biases and excessive structure in the ozone field. In the southern hemisphere ozone hole, only the analyses which correctly model heterogeneous ozone depletion are able to reproduce the near-complete ozone destruction over the pole. In the upper-stratosphere and mesosphere (above 5 hPa), some ozone photochemistry schemes caused large but easily remedied biases. The diurnal cycle of ozone in the

  2. The Efficacy of Cognitive Behavioral Therapy: A Review of Meta-analyses

    PubMed Central

    Hofmann, Stefan G.; Asnaani, Anu; Vonk, Imke J.J.; Sawyer, Alice T.; Fang, Angela

    2012-01-01

    Cognitive behavioral therapy (CBT) refers to a popular therapeutic approach that has been applied to a variety of problems. The goal of this review was to provide a comprehensive survey of meta-analyses examining the efficacy of CBT. We identified 269 meta-analytic studies and reviewed of those a representative sample of 106 meta-analyses examining CBT for the following problems: substance use disorder, schizophrenia and other psychotic disorders, depression and dysthymia, bipolar disorder, anxiety disorders, somatoform disorders, eating disorders, insomnia, personality disorders, anger and aggression, criminal behaviors, general stress, distress due to general medical conditions, chronic pain and fatigue, distress related to pregnancy complications and female hormonal conditions. Additional meta-analytic reviews examined the efficacy of CBT for various problems in children and elderly adults. The strongest support exists for CBT of anxiety disorders, somatoform disorders, bulimia, anger control problems, and general stress. Eleven studies compared response rates between CBT and other treatments or control conditions. CBT showed higher response rates than the comparison conditions in 7 of these reviews and only one review reported that CBT had lower response rates than comparison treatments. In general, the evidence-base of CBT is very strong. However, additional research is needed to examine the efficacy of CBT for randomized-controlled studies. Moreover, except for children and elderly populations, no meta-analytic studies of CBT have been reported on specific subgroups, such as ethnic minorities and low income samples. PMID:23459093

  3. Isolation, Characterization, and Bioinformatic Analyses of Lytic Salmonella Enteritidis Phages and Tests of Their Antibacterial Activity in Food.

    PubMed

    Han, Han; Wei, Xiaoting; Wei, Yi; Zhang, Xiufeng; Li, Xuemin; Jiang, Jinzhong; Wang, Ran

    2017-02-01

    Salmonella Enteritidis remains a major threat for food safety. To take efforts to develop phage-based biocontrol for S. Enteritidis contamination in food, in this study, the phages against S. Enteritidis were isolated from sewage samples, characterized by host range assays, DNA restriction enzyme pattern analyses, and transmission electron microscope observations, and tested for antibacterial activity in food; some potent phages were further characterized by bioinformatic analyses. Results showed that based on the plaque quality and host range, seven lytic phages targeting S. Enteritidis were selected, considered as seven distinct phages through DNA physical maps, and classified as Myoviridae or Siphoviridae family by morphologic observations; the combined use of such seven strain phages as a "food additive" could succeed in controlling the artificial S. Enteritidis contamination in the different physical forms of food at a range of temperatures; by bioinformatic analyses, both selected phage BPS11Q3 and BPS15Q2 seemed to be newfound obligate lytic phage strains with no indications for any potentially harmful genes in their genomes. In conclusion, our results showed a potential of isolated phages as food additives for controlling S. Enteritidis contamination in some salmonellosis outbreak-associated food vehicles, and there could be minimized potential risk associated with using BPS11Q3 and BPS15Q2 in food.

  4. DESCRIPTIVE ANALYSES OF PEDIATRIC FOOD REFUSAL AND ACCEPTANCE

    PubMed Central

    Borrero, Carrie S.W; Woods, Julia N; Borrero, John C; Masler, Elizabeth A; Lesser, Aaron D

    2010-01-01

    Functional analyses of inappropriate mealtime behavior typically include conditions to determine if the contingent delivery of attention, tangible items, or escape reinforce food refusal. In the current investigation, descriptive analyses were conducted for 25 children who had been admitted to a program for the assessment and treatment of food refusal to determine if the consequences commonly delivered during functional analyses were observed during parent-conducted meals. The conditional probabilities for the delivery of attention, tangible items, and escape following food refusal and acceptance were compared to the unconditional probabilities of each event. Results showed that attention and escape most frequently followed refusal and differed depending on the topography of refusal. Implications for further evaluations of food refusal using similar methods are discussed. PMID:20808496

  5. Astronomers Make "Movie" of Radio Images Showing Supernova Explosion

    NASA Astrophysics Data System (ADS)

    1995-11-01

    - dispersed radio telescopes has existed for only a few years. Supernova 1993J was the first one that was both close enough and had radio emission strong enough to enable scientists to make such detailed images. While the circular images show that the explosion debris is expanding symmetrically, the radio emission is stronger on one side of the shell. The explanation for this is unclear. Some astronomers have suggested that the stronger emission could result from the debris interacting with a companion star orbiting the one that exploded. The researchers believe that their sequence of images, with the stronger emission persisting for months after the explosion, makes the companion-star hypothesis unlikely. Previous radio observations of older and larger supernova shells have revealed protrusions within the shell. The latest images, however, show no such protrusions. This places limits on theories of how the protrusions form. In addition, the new images show that Supernova 1993J's debris shell has shown no signs yet of slowing due to interaction with material surrounding it. The material from the star's explosion is moving at nearly 10,000 miles per second, according to the researchers. At that speed, the material would travel the distance from the Earth to Saturn in one day. When the angular expansion rate of the supernova debris measured by the radio observatories is combined with the expansion speed of the same debris, measured by optical astronomers, it is possible to obtain an accurate value of the distance to M81. The value determined, 11 million light-years, is similar to that obtained by other, independent, means. This is important, as astronomers continue to seek more accurate distances to celestial objects to better gauge the actual size of the Universe. In addition to the VLA and several antennas of the VLBA, the scientists used German and Italian radio telescopes, as well as NASA facilities in California and Spain.

  6. The ASSET intercomparison of ozone analyses: method and first results

    NASA Astrophysics Data System (ADS)

    Geer, A. J.; Lahoz, W. A.; Bekki, S.; Bormann, N.; Errera, Q.; Eskes, H. J.; Fonteyn, D.; Jackson, D. R.; Juckes, M. N.; Massart, S.; Peuch, V.-H.; Rharmili, S.; Segers, A.

    2006-06-01

    This paper examines 11 sets of ozone analyses from 7 different data assimilation systems. Two are numerical weather prediction (NWP) systems based on general circulation models (GCMs); the other five use chemistry transport models (CTMs). These systems contain either linearised or detailed ozone chemistry, or no chemistry at all. In most analyses, MIPAS (Michelson Interferometer for Passive Atmospheric Sounding) ozone data are assimilated. Two examples assimilate SCIAMACHY (Scanning Imaging Absorption Spectrometer for Atmospheric Chartography) observations. The analyses are compared to independent ozone observations covering the troposphere, stratosphere and lower mesosphere during the period July to November 2003. Through most of the stratosphere (50 hPa to 1 hPa), biases are usually within ±10% and standard deviations less than 10% compared to ozonesondes and HALOE (Halogen Occultation Experiment). Biases and standard deviations are larger in the upper-troposphere/lower-stratosphere, in the troposphere, the mesosphere, and the Antarctic ozone hole region. In these regions, some analyses do substantially better than others, and this is mostly due to differences in the models. At the tropical tropopause, many analyses show positive biases and excessive structure in the ozone fields, likely due to known deficiencies in assimilated tropical wind fields and a degradation in MIPAS data at these levels. In the southern hemisphere ozone hole, only the analyses which correctly model heterogeneous ozone depletion are able to reproduce the near-complete ozone destruction over the pole. In the upper-stratosphere and mesosphere (above 5 hPa), some ozone photochemistry schemes caused large but easily remedied biases. The diurnal cycle of ozone in the mesosphere is not captured, except by the one system that includes a detailed treatment of mesospheric chemistry. In general, similarly good results are obtained no matter what the assimilation method (Kalman filter, three or

  7. Justification for Shielded Receiver Tube Additional Lead Shielding

    SciTech Connect

    BOGER, R.M.

    2000-04-11

    In order to reduce high radiation dose rates encountered when core sampling some radioactive waste tanks the addition of 240 lbs. of lead shielding is being considered to the shielded receiver tube on core sample trucks No.1, No.3 and No.4. The lead shielding is 4 inch diameter x 1/2 inch thick half rounds that have been installed around the SR tube over its' full length. Using three unreleased but independently reviewed structural analyses HNF-6018 justifies the addition of the lead shielding.

  8. Variation in the peacock's train shows a genetic component.

    PubMed

    Petrie, Marion; Cotgreave, Peter; Pike, Thomas W

    2009-01-01

    Female peafowl (Pavo cristatus) show a strong mating preference for males with elaborate trains. This, however, poses something of a paradox because intense directional selection should erode genetic variation in the males' trains, so that females will no longer benefit by discriminating among males on the basis of these traits. This situation is known as the 'lek paradox', and leads to the theoretical expectation of low heritability in the peacock's train. We used two independent breeding experiments, involving a total of 42 sires and 86 of their male offspring, to estimate the narrow sense heritabilities of male ornaments and other morphometric traits. Contrary to expectation, we found significant levels of heritability in a trait known to be used by females during mate choice (train length), while no significant heritabilities were evident for other, non-fitness related morphological traits (tarsus length, body weight or spur length). This study adds to the building body of evidence that high levels of additive genetic variance can exist in secondary sexual traits under directional selection, but further emphasizes the main problem of what maintains this variation.

  9. Borrelia burgdorferi shows specificity of binding to glycosphingolipids.

    PubMed Central

    Backenson, P B; Coleman, J L; Benach, J L

    1995-01-01

    Live but not fixed or heat-killed Borrelia burgdorferi bound to galactocerebroside, lactosylceramide, and ceramide trihexoside. In addition, this organism bound to the disialoganglioside GD1a and the trisialoganglioside GT1b but not to gangliosides GM1, GD1b, GM2, and GM3 and not to asialo GM1. This adhesion pattern confirmed earlier findings of binding to galactocerebroside and places this organism within a prokaryotic group which binds to lactosylceramide. The binding to GD1a and GT1b, both of which carry terminal as well as multiple sialic acids, indicates that B. burgdorferi can show specificity of binding within a group of acidic gangliosides. Adhesion could not be inhibited by several concentrations of sugars and sialic acid, indicating more complex binding requirements than for terminal carbohydrates alone. Low-passage strains adhered to the four substrates in greater numbers than strains in culture for long periods of time. OspB mutants in general bound better or at least equally well to several of the glycosphingolipids, and preincubation of substrates with soluble recombinant and affinity-purified Osp did not inhibitor or weakly inhibited the binding of the organisms. These findings suggest that outer surface lipoproteins A and B are not directly involved in adhesion to glycosphingolipids. PMID:7622201

  10. Quick Phases of Infantile Nystagmus Show the Saccadic Inhibition Effect

    PubMed Central

    Harrison, James J.; Sumner, Petroc; Dunn, Matt J.; Erichsen, Jonathan T.; Freeman, Tom C. A.

    2015-01-01

    Purpose. Infantile nystagmus (IN) is a pathological, involuntary oscillation of the eyes consisting of slow, drifting eye movements interspersed with rapid reorienting quick phases. The extent to which quick phases of IN are programmed similarly to saccadic eye movements remains unknown. We investigated whether IN quick phases exhibit ‘saccadic inhibition,' a phenomenon typically related to normal targeting saccades, in which the initiation of the eye movement is systematically delayed by task-irrelevant visual distractors. Methods. We recorded eye position from 10 observers with early-onset idiopathic nystagmus while task-irrelevant distractor stimuli were flashed along the top and bottom of a large screen at ±10° eccentricity. The latency distributions of quick phases were measured with respect to these distractor flashes. Two additional participants, one with possible albinism and one with fusion maldevelopment nystagmus syndrome, were also tested. Results. All observers showed that a distractor flash delayed the execution of quick phases that would otherwise have occurred approximately 100 ms later, exactly as in the standard saccadic inhibition effect. The delay did not appear to differ between the two main nystagmus types under investigation (idiopathic IN with unidirectional and bidirectional jerk). Conclusions. The presence of the saccadic inhibition effect in IN quick phases is consistent with the idea that quick phases and saccades share a common programming pathway. This could allow quick phases to take on flexible, goal-directed behavior, at odds with the view that IN quick phases are stereotyped, involuntary eye movements. PMID:25670485

  11. Designing forgiveness interventions: guidance from five meta-analyses.

    PubMed

    Recine, Ann C

    2015-06-01

    The Nursing Interventions Classification system includes forgiveness facilitation as part of the research-based taxonomy of nursing interventions. Nurses need practical guidance in finding the type of intervention that works best in the nursing realm. Five meta-analyses of forgiveness interventions were reviewed to illuminate best practice. The only studies included were meta-analyses of forgiveness interventions in which the authors calculated effect size. Forgiveness interventions were shown to be helpful in addressing mental/emotional health. Components of effective interventions include recalling the offense, empathizing with the offender, committing to forgive, and overcoming feelings of unforgiveness. The meta-analyses showed that people receiving forgiveness interventions reported more forgiveness than those who had no intervention. Forgiveness interventions resulted in more hope and less depression and anxiety than no treatment. A process-based intervention is more effective than a shorter cognitive decision-based model. Limitations of the meta-analyses included inconsistency of measures and a lack of consensus on a definition of forgiveness. Notwithstanding these limitations, the meta-analyses offer strong evidence of what contributes to the effectiveness of forgiveness interventions. The implications of the studies are useful for designing evidence-based clinical forgiveness interventions to enhance nursing practice.

  12. The use of secondary ion mass spectrometry in forensic analyses of ultra-small samples

    NASA Astrophysics Data System (ADS)

    Cliff, John

    2010-05-01

    less than 300 picograms of bacteria. Perhaps the most successful application of SIMS for forensic purposes to date is in the field of nuclear forensics. An example that has been used by laboratories associated with the International Atomic Energy Agency is the examination of environmental samples for enriched uranium particles indicative of clandestine weapons production activities.. The analytical challenge in these types of measurements is to search complex environmental matrices for U-bearing particles which must then be analyzed for 234U, 235U, and 236U content with high precision and accuracy. Older-generation SIMS instruments were hampered by small geometries that made resolution of significant interferences problematic. In addition, automated particle search software was proprietary and difficult to obtain. With the development of new search software, the IMS 1280 is capable of searching a sample in a matter of hours, flagging U-bearing particles for later analyses, and providing a rough 235U content. Particles of interest can be revisited for high precision analyses, and all U-isotopes can be measured simultaneously in multicollector mode, dramatically improving analysis time and internal precision. Further, the large geometry of the instrument allows complete resolution of isobaric interferences that have traditionally limited SIMS analyses of difficult samples. Examples of analyses of micron-sized standard particles indicate that estimates of 235U enrichment can be obtained with an external relative precision of 0.1% and 234U and 236U contents can be obtained with a relative precision of less than 1%. Analyses of 'real' samples show a dramatic improvement in the data quality obtained compared with small-geometry SIMS instruments making SIMS the method of choice for these high-profile samples when accurate, precise, and rapid results are required.

  13. Areas V1 and V2 show microsaccade-related 3-4-Hz covariation in gamma power and frequency.

    PubMed

    Lowet, E; Roberts, M J; Bosman, C A; Fries, P; De Weerd, P

    2016-05-01

    Neuronal gamma-band synchronization (25-80 Hz) in visual cortex appears sustained and stable during prolonged visual stimulation when investigated with conventional averages across trials. However, recent studies in macaque visual cortex have used single-trial analyses to show that both power and frequency of gamma oscillations exhibit substantial moment-by-moment variation. This has raised the question of whether these apparently random variations might limit the functional role of gamma-band synchronization for neural processing. Here, we studied the moment-by-moment variation in gamma oscillation power and frequency, as well as inter-areal gamma synchronization, by simultaneously recording local field potentials in V1 and V2 of two macaque monkeys. We additionally analyzed electrocorticographic V1 data from a third monkey. Our analyses confirm that gamma-band synchronization is not stationary and sustained but undergoes moment-by-moment variations in power and frequency. However, those variations are neither random and nor a possible obstacle to neural communication. Instead, the gamma power and frequency variations are highly structured, shared between areas and shaped by a microsaccade-related 3-4-Hz theta rhythm. Our findings provide experimental support for the suggestion that cross-frequency coupling might structure and facilitate the information flow between brain regions.

  14. Overview of Food Ingredients, Additives and Colors

    MedlinePlus

    ... pesticides where other legal premarket approval requirements apply. Direct food additives are those that are added to ... and other foods to add texture -- is a direct additive. Most direct additives are identified on the ...

  15. "Youth Amplified": Using Critical Pedagogy to Stimulate Learning through Dialogue at a Youth Radio Show

    ERIC Educational Resources Information Center

    Cooper, Adam

    2016-01-01

    In this paper I describe and analyse how critical pedagogy, an approach to teaching and learning that encourages students to reflect on their socio-political contexts, may stimulate critical consciousness and dialogue at a youth radio show. The participants, who attended four diverse Cape Town high schools and predominantly lived in poor…

  16. Uniform Additivity in Classical and Quantum Information

    NASA Astrophysics Data System (ADS)

    Cross, Andrew; Li, Ke; Smith, Graeme

    2017-01-01

    Information theory quantifies the optimal rates of resource interconversions, usually in terms of entropies. However, nonadditivity often makes evaluating entropic formulas intractable. In a few auspicious cases, additivity allows a full characterization of optimal rates. We study uniform additivity of formulas, which is easily evaluated and captures all known additive quantum formulas. Our complete characterization of uniform additivity exposes an intriguing new additive quantity and identifies a remarkable coincidence—the classical and quantum uniformly additive functions with one auxiliary variable are identical.

  17. Optical, Energetic and Exergetic Analyses of Parabolic Trough Collectors

    NASA Astrophysics Data System (ADS)

    Murat, Öztürk; Nalan Çiçek, Bezir; Nuri, Özek

    2007-07-01

    Parabolic trough collectors generate thermal energy from solar energy. Especially, they are very convenient for applications in high temperature solar power systems. To determine the design parameters, parabolic trough collectors must be analysed with optical analysis. In addition, thermodynamics (energy and exergy) analysis in the development of an energy efficient system must be achieved. Solar radiation passes through Earth's atmosphere until it reaches on Earth's surface and is focused from the parabolic trough collector to the tube receiver with a transparent insulated envelope. All of them constitute a complex mechanism. We investigate the geometry of parabolic trough reflector and characteristics of solar radiation to the reflecting surface through Earth's atmosphere, and calculate the collecting total energy in the receiver. The parabolic trough collector, of which design parameters are given, is analysed in regard to the energy and exergy analysis considering the meteorological specification in May, June, July and August in Isparta/Turkey, and the results are presented.

  18. Multivariate analyses of crater parameters and the classification of craters

    NASA Technical Reports Server (NTRS)

    Siegal, B. S.; Griffiths, J. C.

    1974-01-01

    Multivariate analyses were performed on certain linear dimensions of six genetic types of craters. A total of 320 craters, consisting of laboratory fluidization craters, craters formed by chemical and nuclear explosives, terrestrial maars and other volcanic craters, and terrestrial meteorite impact craters, authenticated and probable, were analyzed in the first data set in terms of their mean rim crest diameter, mean interior relief, rim height, and mean exterior rim width. The second data set contained an additional 91 terrestrial craters of which 19 were of experimental percussive impact and 28 of volcanic collapse origin, and which was analyzed in terms of mean rim crest diameter, mean interior relief, and rim height. Principal component analyses were performed on the six genetic types of craters. Ninety per cent of the variation in the variables can be accounted for by two components. Ninety-nine per cent of the variation in the craters formed by chemical and nuclear explosives is explained by the first component alone.

  19. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  20. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...