The dilemma of allergy to food additives.

PubMed

Bahna, Sami L; Burkhardt, Joshua G

2018-01-01

To provide a brief summary on food additives and to outline a practical approach for evaluating subjects suspected of having reactions to food additives. Information was derived from selected reviews and original articles published in peer-reviewed journals, supplemented by the clinical experience of the authors. Priority was given to studies that used blinded, placebo controlled, oral challenges to confirm adverse reactions to food additives. In addition, selected, appropriately evaluated case reports were included. A large number of food additives are widely used in the food industry. Allergic reactions to additives seem to be rare but are very likely underdiagnosed, primarily due to a low index of suspicion. A wide variety of symptoms to food additives have been reported, but a cause-and-effect relationship has not been well documented in the majority of cases. Reactions to food additives should be suspected in patients who report symptoms related to multiple foods or to a certain food when commercially prepared but not when home made. It is also prudent to investigate food additives in subjects considered to have "idiopathic" reactions. Except for a limited number of natural additives, there is a small role for skin tests or in vitro testing. Oral challenge, in stages, with commonly used additives is the definitive procedure for detecting the offending agent. Once the specific additive is identified, management is strict avoidance, which can be difficult.

Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing

NASA Astrophysics Data System (ADS)

MacDonald, D.; Fernández, R.; Delloro, F.; Jodoin, B.

2017-04-01

Titanium parts are ideally suited for aerospace applications due to their unique combination of high specific strength and excellent corrosion resistance. However, titanium as bulk material is expensive and challenging/costly to machine. Production of complex titanium parts through additive manufacturing looks promising, but there are still many barriers to overcome before reaching mainstream commercialization. The cold gas dynamic spraying process offers the potential for additive manufacturing of large titanium parts due to its reduced reactive environment, its simplicity to operate, and the high deposition rates it offers. A few challenges are to be addressed before the additive manufacturing potential of titanium by cold gas dynamic spraying can be reached. In particular, it is known that titanium is easy to deposit by cold gas dynamic spraying, but the deposits produced are usually porous when nitrogen is used as the carrier gas. In this work, a method to manufacture low-porosity titanium components at high deposition efficiencies is revealed. The components are produced by combining low-pressure cold spray using nitrogen as the carrier gas with low-cost titanium powder produced using the Armstrong process. The microstructure and mechanical properties of additive manufactured titanium components are investigated.

Energy Challenges: Isolating Results Due to Behavior Change

ERIC Educational Resources Information Center

Boulton, Kelly; Pallant, Eric; Bradshaw-Wilson, Casey; Choate, Beth; Carbone, Ian

2017-01-01

Purpose: Approximately 700 colleges and universities have committed to climate neutrality, which will require significant reductions in energy consumption. This paper aims to explore the effectiveness of an Annual Energy Challenge in curtailing electricity use by changing consumption behaviors at one liberal arts college.…

Additive Manufacturing of Silicon Carbide-Based Ceramic Matrix Composites: Technical Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Singh, Mrityunjay; Halbig, Michael C.; Grady, Joseph E.

2016-01-01

Advanced SiC-based ceramic matrix composites offer significant contributions toward reducing fuel burn and emissions by enabling high overall pressure ratio (OPR) of gas turbine engines and reducing or eliminating cooling air in the hot-section components, such as shrouds, combustor liners, vanes, and blades. Additive manufacturing (AM), which allows high value, custom designed parts layer by layer, has been demonstrated for metals and polymer matrix composites. However, there has been limited activity on additive manufacturing of ceramic matrix composites (CMCs). In this presentation, laminated object manufacturing (LOM), binder jet process, and 3-D printing approaches for developing ceramic composite materials are presented. For the laminated object manufacturing (LOM), fiber prepreg laminates were cut into shape with a laser and stacked to form the desired part followed by high temperature heat treatments. For the binder jet, processing optimization was pursued through silicon carbide powder blending, infiltration with and without SiC nano powder loading, and integration of fibers into the powder bed. Scanning electron microscopy was conducted along with XRD, TGA, and mechanical testing. Various technical challenges and opportunities for additive manufacturing of ceramics and CMCs will be presented.

Additive manufacturing for steels: a review

NASA Astrophysics Data System (ADS)

Zadi-Maad, A.; Rohib, R.; Irawan, A.

2018-01-01

Additive manufacturing (AM) of steels involves the layer by layer consolidation of powder or wire feedstock using a heating beam to form near net shape products. For the past decades, the AM technique reaches the maturation of both research grade and commercial production due to significant research work from academic, government and industrial research organization worldwide. AM process has been implemented to replace the conventional process of steel fabrication due to its potentially lower cost and flexibility manufacturing. This paper provides a review of previous research related to the AM methods followed by current challenges issues. The relationship between microstructure, mechanical properties, and process parameters will be discussed. Future trends and recommendation for further works are also provided.

Effects of Dietary Additives and Early Feeding on Performance, Gut Development and Immune Status of Broiler Chickens Challenged with Clostridium perfringens

PubMed Central

Ao, Z.; Kocher, A.; Choct, M.

2012-01-01

The effects of dietary additives and holding time on resistance and resilience of broiler chickens to Clostridium perfringens challenge were investigated by offering four dietary treatments. These were a negative control (basal), a positive control (Zn-bacitracin) and two dietary additives, mannanoligosaccharides (MOS), and acidifier. Two holding times included (a) immediate access to feed and water post hatch (FED) and (b) access to both feed and water 48 h post hatch (HELD). Chicks fed Zn-bacitracin had no intestinal lesions attributed to necrotic enteritis (NE), whereas chicks fed both MOS or acidifier showed signs of NE related lesions. All dietary treatments were effective in reducing the numbers of C. perfringens in the ileum post challenge. The FED chicks had heavier body weight and numerically lower mortality. The FED chicks also showed stronger immune responses to NE challenge, showing enhanced (p<0.05) proliferation of T-cells. Early feeding of the MOS supplemented diet increased (p<0.05) IL-6 production. The relative bursa weight of the FED chicks was heavier at d 21 (p<0.05). All the additives increased the relative spleen weight of the HELD chicks at d 14 (p<0.05). The FED chicks had increased villus height and reduced crypt depth, and hence an increased villus/crypt ratio, especially in the jejunum at d 14 (p<0.05). The same was true for the HELD chicks given dietary additives (p<0.05). It may be concluded that the chicks with early access to dietary additives showed enhanced immune response and gut development, under C. perfringens challenge. The findings of this study shed light on managerial and nutritional strategies that could be used to prevent NE in the broiler industry without the use of in-feed antibiotics. PMID:25049595

Dietary addition of Lactobacillus rhamnosus GG impairs the health of Escherichia coli F4-challenged piglets.

PubMed

Trevisi, P; Casini, L; Coloretti, F; Mazzoni, M; Merialdi, G; Bosi, P

2011-08-01

Lactobacillus rhamnosus GG (LGG) is a probiotic for humans and is normally not found in pigs; however, it has been shown to protect the human-derived intestinal Caco-2 cells against the damage induced by an important intestinal pathogen, enterotoxigenic Escherichia coli F4 (ETEC). An experiment was conducted to test whether the dietary addition of LGG improves the growth and health of weaned pigs when orally challenged by E. coli F4. Thirty-six pigs were weaned at 21 days and assigned to a standard weaning diet with or without 1010 CFU LGG (ATCC 53103) per day. The pigs, individually penned, were orally challenged with 1.5 ml of a 1010 CFU E. coli F4 suspension on day 7 and slaughtered on day 12 or 14. With the addition of LGG, the average daily gain and the average daily feed intake were reduced after the challenge with ETEC and for the entire trial (P < 0.05). The average faecal score tended to worsen from day 11 to the end of the trial and the concentration of ETEC in the faeces tended to increase (P = 0.07) with the LGG supplementation. The counts of lactic acid bacteria, enterobacteria and yeasts in the colonic digesta were not affected. The pH values in ileal, colonic and caecal digesta, and the small intestine size were also unchanged. Regardless of the site of measurement (duodenum, jejunum or ileum), a trend of decreased villus height was seen with LGG (P = 0.10). Crypt depth and villus to crypt ratio were unchanged by the diet. A gradual increase of total seric IgA was seen after 1 week and after the challenge, in the control (P < 0.05), but not in the treated group. After the challenge, the LGG reduced the total IgA in the blood serum (P < 0.05), v. the control. The total IgA in the saliva and in the jejunum secretion were not affected by the diet. The F4-specific IgA activity was not affected by the diet at all the samplings. Our result shows that, the administration of LGG do not prevent or reduce the detrimental effect of the E. coli F4 infection on

76 FR 13431 - Major Portion Prices and Due Date for Additional Royalty Payments on Indian Gas Production in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-11

...: Notice of major portion prices for calendar year 2009. SUMMARY: Final regulations for valuing gas produced from Indian leases, published August 10, 1999, require the Office of Natural Resources Revenue... calendar year 2009. DATES: The due date to pay additional royalties based on the major portion prices is...

One-dimensional analysis of unsteady flows due to supercritical heat addition in high speed condensing steam

NASA Astrophysics Data System (ADS)

Malek, N. A.; Hasini, H.; Yusoff, M. Z.

2013-06-01

Unsteadiness in supersonic flow in nozzles can be generated by the release of heat due to spontaneous condensation. The heat released is termed "supercritical" and may be responsible for turbine blades failure in turbine cascade as it causes a supersonic flow to decelerate. When the Mach number is reduced to unity, the flow can no longer sustain the additional heat and becomes unstable. This paper aims to numerically investigate the unsteadiness caused by supercritical heat addition in one-dimensional condensing flows. The governing equations for mass, momentum and energy, coupled with the equations describing the wetness fraction and droplet growth are integrated and solved iteratively to reveal the final solution. Comparison is made with well-established experimental and numerical solution done by previous researchers that shows similar phenomena.

Restraint of children with additional needs in motor vehicles: knowledge and challenges of paediatric occupational therapists in Victoria, Australia.

PubMed

Baker, Anne; Galvin, Jane; Vale, Lisa; Lindner, Helen

2012-02-01

This research project aimed to understand the challenges faced by occupational therapists when making recommendations regarding the restraint of children with additional needs in motor vehicles in Victoria, Australia. A cross-sectional survey design was used to explore current practice in relation to the prescription of motor vehicle restraints in Victoria, Australia. An electronic survey was sent to occupational therapists working with children aged from birth to 18 years in early intervention services, hospitals, schools, community services or private practice.   Challenges faced by occupational therapists related to a lack of knowledge of relevant standards and legal requirements, issues seating children with behavioural difficulties, families' inability to purchase recommended equipment and constraints as a result of funding issues. Further work is required to develop appropriate resources which support occupational therapists to make car seating recommendations for children with additional needs which comply with Australian legal requirements and standards. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

Genome assembly reborn: recent computational challenges

PubMed Central

2009-01-01

Research into genome assembly algorithms has experienced a resurgence due to new challenges created by the development of next generation sequencing technologies. Several genome assemblers have been published in recent years specifically targeted at the new sequence data; however, the ever-changing technological landscape leads to the need for continued research. In addition, the low cost of next generation sequencing data has led to an increased use of sequencing in new settings. For example, the new field of metagenomics relies on large-scale sequencing of entire microbial communities instead of isolate genomes, leading to new computational challenges. In this article, we outline the major algorithmic approaches for genome assembly and describe recent developments in this domain. PMID:19482960

Offshore oil spill response practices and emerging challenges.

PubMed

Li, Pu; Cai, Qinhong; Lin, Weiyun; Chen, Bing; Zhang, Baiyu

2016-09-15

Offshore oil spills are of tremendous concern due to their potential impact on economic and ecological systems. A number of major oil spills triggered worldwide consciousness of oil spill preparedness and response. Challenges remain in diverse aspects such as oil spill monitoring, analysis, assessment, contingency planning, response, cleanup, and decision support. This article provides a comprehensive review of the current situations and impacts of offshore oil spills, as well as the policies and technologies in offshore oil spill response and countermeasures. Correspondingly, new strategies and a decision support framework are recommended for improving the capacities and effectiveness of oil spill response and countermeasures. In addition, the emerging challenges in cold and harsh environments are reviewed with recommendations due to increasing risk of oil spills in the northern regions from the expansion of the Arctic Passage. Copyright © 2016 Elsevier Ltd. All rights reserved.

Friction Stir Additive Manufacturing: Route to High Structural Performance

NASA Astrophysics Data System (ADS)

Palanivel, S.; Sidhar, H.; Mishra, R. S.

2015-03-01

Aerospace and automotive industries provide the next big opportunities for additive manufacturing. Currently, the additive industry is confronted with four major challenges that have been identified in this article. These challenges need to be addressed for the additive technologies to march into new frontiers and create additional markets. Specific potential success in the transportation sectors is dependent on the ability to manufacture complicated structures with high performance. Most of the techniques used for metal-based additive manufacturing are fusion based because of their ability to fulfill the computer-aided design to component vision. Although these techniques aid in fabrication of complex shapes, achieving high structural performance is a key problem due to the liquid-solid phase transformation. In this article, friction stir additive manufacturing (FSAM) is shown as a potential solid-state process for attaining high-performance lightweight alloys for simpler geometrical applications. To illustrate FSAM as a high-performance route, manufactured builds of Mg-4Y-3Nd and AA5083 are shown as examples. In the Mg-based alloy, an average hardness of 120 HV was achieved in the built structure and was significantly higher than that of the base material (97 HV). Similarly for the Al-based alloy, compared with the base hardness of 88 HV, the average built hardness was 104 HV. A potential application of FSAM is illustrated by taking an example of a simple stiffener assembly.

5 CFR 919.735 - Under what conditions do I get an additional opportunity to challenge the facts on which the...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Under what conditions do I get an additional opportunity to challenge the facts on which the suspension is based? 919.735 Section 919.735 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) GOVERNMENTWIDE DEBARMENT AND SUSPENSION ...

5 CFR 919.830 - Under what conditions do I get an additional opportunity to challenge the facts on which a...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Under what conditions do I get an additional opportunity to challenge the facts on which a proposed debarment is based? 919.830 Section 919.830 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) GOVERNMENTWIDE DEBARMENT AND SUSPENSION ...

22 CFR 208.830 - Under what conditions do I get an additional opportunity to challenge the facts on which the...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Under what conditions do I get an additional opportunity to challenge the facts on which the proposed debarment is based? 208.830 Section 208.830 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) Debarment § 208.830 Under what...

Quantifying O3 Impacts in Urban Areas Due to Wildfires Using a Generalized Additive Model.

PubMed

Gong, Xi; Kaulfus, Aaron; Nair, Udaysankar; Jaffe, Daniel A

2017-11-21

Wildfires emit O 3 precursors but there are large variations in emissions, plume heights, and photochemical processing. These factors make it challenging to model O 3 production from wildfires using Eulerian models. Here we describe a statistical approach to characterize the maximum daily 8-h average O 3 (MDA8) for 8 cities in the U.S. for typical, nonfire, conditions. The statistical model represents between 35% and 81% of the variance in MDA8 for each city. We then examine the residual from the model under conditions with elevated particulate matter (PM) and satellite observed smoke ("smoke days"). For these days, the residuals are elevated by an average of 3-8 ppb (MDA8) compared to nonsmoke days. We found that while smoke days are only 4.1% of all days (May-Sept) they are 19% of days with an MDA8 greater than 75 ppb. We also show that a published method that does not account for transport patterns gives rise to large overestimates in the amount of O 3 from fires, particularly for coastal cities. Finally, we apply this method to a case study from August 2015, and show that the method gives results that are directly applicable to the EPA guidance on excluding data due to an uncontrollable source.

Polylactides in additive biomanufacturing.

PubMed

Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

2016-12-15

New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

Additive Manufacturing: Unlocking the Evolution of Energy Materials

PubMed Central

Zhakeyev, Adilet; Wang, Panfeng; Shu, Wenmiao; Wang, Huizhi

2017-01-01

Abstract The global energy infrastructure is undergoing a drastic transformation towards renewable energy, posing huge challenges on the energy materials research, development and manufacturing. Additive manufacturing has shown its promise to change the way how future energy system can be designed and delivered. It offers capability in manufacturing complex 3D structures, with near‐complete design freedom and high sustainability due to minimal use of materials and toxic chemicals. Recent literatures have reported that additive manufacturing could unlock the evolution of energy materials and chemistries with unprecedented performance in the way that could never be achieved by conventional manufacturing techniques. This comprehensive review will fill the gap in communicating on recent breakthroughs in additive manufacturing for energy material and device applications. It will underpin the discoveries on what 3D functional energy structures can be created without design constraints, which bespoke energy materials could be additively manufactured with customised solutions, and how the additively manufactured devices could be integrated into energy systems. This review will also highlight emerging and important applications in energy additive manufacturing, including fuel cells, batteries, hydrogen, solar cell as well as carbon capture and storage. PMID:29051861

Additive Manufacturing: Unlocking the Evolution of Energy Materials.

PubMed

Zhakeyev, Adilet; Wang, Panfeng; Zhang, Li; Shu, Wenmiao; Wang, Huizhi; Xuan, Jin

2017-10-01

The global energy infrastructure is undergoing a drastic transformation towards renewable energy, posing huge challenges on the energy materials research, development and manufacturing. Additive manufacturing has shown its promise to change the way how future energy system can be designed and delivered. It offers capability in manufacturing complex 3D structures, with near-complete design freedom and high sustainability due to minimal use of materials and toxic chemicals. Recent literatures have reported that additive manufacturing could unlock the evolution of energy materials and chemistries with unprecedented performance in the way that could never be achieved by conventional manufacturing techniques. This comprehensive review will fill the gap in communicating on recent breakthroughs in additive manufacturing for energy material and device applications. It will underpin the discoveries on what 3D functional energy structures can be created without design constraints, which bespoke energy materials could be additively manufactured with customised solutions, and how the additively manufactured devices could be integrated into energy systems. This review will also highlight emerging and important applications in energy additive manufacturing, including fuel cells, batteries, hydrogen, solar cell as well as carbon capture and storage.

Anthropogenic wetlands due to over-irrigation of desert areas; A challenging hydrogeological investigation with extensive geophysical input

NASA Astrophysics Data System (ADS)

Behroozmand, A. A.; Teatini, P.; Pedersen, J. B. B.; Auken, E.; Tosatto, O.; Christiansen, A. V.

2015-12-01

During the last century, many large irrigation projects have been initiated in arid lands worldwide. Despite a tremendous increase in food production, a common problem when characterizing these zones is land degradation in form of waterlogging. As results, large volumes of water are lost due to surplus irrigation in regions where water availability is extremely challenging for both population survival and economic development. The Nubariya depression, Western Desert (Egypt), is a clear example of this mechanism. Following the reclamation of desert lands for agricultural production, an artificial brackish and contaminated lake developed in the area in the late 1990s and presently extends for about 2.5 km2. Available data provide evidence of a simultaneous general deterioration of the groundwater system. With the main objectives of understanding the hydrological evolution of the area, characterizing the hydrogeological setting and developing scenarios for artificial aquifer remediation and recharge, an extensive hydrogeophysical investigation was carried out in this challenging environment using Magnetic Resonance Sounding (MRS, also called surface NMR) and ground-based Transient EM (TEM). The integrated interpretation of the geophysical surveys, properly calibrated with a number of boreholes, provides a clear hydrogeological picture of the upper 100 m sedimentary structure, in terms of both lithology and groundwater quality. The information is then used to set up a regional groundwater flow and a local density-dependent flow and transport numerical model to reproduce the past evolution of the aquifer system and develop a few scenarios for artificial aquifer recharge using the treated waters provided by a nearby waste-water treatment plant. The research outcomes point the hydrological challenges that emerge for an effective management of water resources in reclaimed desert areas and highlight the effectiveness of integrating advanced geophysical and modeling

Microstructural Development and Technical Challenges in Laser Additive Manufacturing: Case Study with a 316L Industrial Part

NASA Astrophysics Data System (ADS)

Marya, Manuel; Singh, Virendra; Marya, Surendar; Hascoet, Jean Yves

2015-08-01

Additive manufacturing (AM) brings disruptive changes to the ways parts, and products are designed, fabricated, tested, qualified, inspected, marketed, and sold. These changes introduce novel technical challenges and concerns arising from the maturity and diversity of today's AM processes, feedstock materials, and process parameter interactions. AM bears a resemblance with laser and electron beam welding in the so-called conduction mode, which involves a multitude of dynamic physical events between the projected feedstock and a moving heat source that eventually influence AM part properties. For this paper, an air vent was selected for its thin-walled, hollow, and variable cross section, and limited size. The studied air vents, randomly selected from a qualification batch, were fabricated out of 316L stainless steel using a 4 kW fiber laser powder-fed AM system, referred to as construction laser additive direct (CLAD). These were systematically characterized by microhardness indentation, visual examination, optical and scanning electron microscopy, and electron-back-scattering diffraction in order to determine AM part suitability for service and also broadly discuss metallurgical phenomena. The paper then briefly expands the discussion to include additional engineering alloys and further analyze relationships between AM process parameters and AM part properties, consistently utilizing past experience with the same powder-fed CLAD 3D printer, the well-established science and technology of welding and joining, and recent publications on additive manufacturing.

Additional challenges for uncertainty analysis in river engineering

NASA Astrophysics Data System (ADS)

Berends, Koen; Warmink, Jord; Hulscher, Suzanne

2016-04-01

The management of rivers for improving safety, shipping and environment requires conscious effort on the part of river managers. River engineers design hydraulic works to tackle various challenges, from increasing flow conveyance to ensuring minimal water depths for environmental flow and inland shipping. Last year saw the completion of such large scale river engineering in the 'Room for the River' programme for the Dutch Rhine River system, in which several dozen of human interventions were built to increase flood safety. Engineering works in rivers are not completed in isolation from society. Rather, their benefits - increased safety, landscaping beauty - and their disadvantages - expropriation, hindrance - directly affect inhabitants. Therefore river managers are required to carefully defend their plans. The effect of engineering works on river dynamics is being evaluated using hydraulic river models. Two-dimensional numerical models based on the shallow water equations provide the predictions necessary to make decisions on designs and future plans. However, like all environmental models, these predictions are subject to uncertainty. In recent years progress has been made in the identification of the main sources of uncertainty for hydraulic river models. Two of the most important sources are boundary conditions and hydraulic roughness (Warmink et al. 2013). The result of these sources of uncertainty is that the identification of single, deterministic prediction model is a non-trivial task. This is this is a well-understood problem in other fields as well - most notably hydrology - and known as equifinality. However, the particular case of human intervention modelling with hydraulic river models compounds the equifinality case. The model that provides the reference baseline situation is usually identified through calibration and afterwards modified for the engineering intervention. This results in two distinct models, the evaluation of which yields the effect of

Manufacturing and Security Challenges in 3D Printing

NASA Astrophysics Data System (ADS)

Zeltmann, Steven Eric; Gupta, Nikhil; Tsoutsos, Nektarios Georgios; Maniatakos, Michail; Rajendran, Jeyavijayan; Karri, Ramesh

2016-07-01

As the manufacturing time, quality, and cost associated with additive manufacturing (AM) continue to improve, more and more businesses and consumers are adopting this technology. Some of the key benefits of AM include customizing products, localizing production and reducing logistics. Due to these and numerous other benefits, AM is enabling a globally distributed manufacturing process and supply chain spanning multiple parties, and hence raises concerns about the reliability of the manufactured product. In this work, we first present a brief overview of the potential risks that exist in the cyber-physical environment of additive manufacturing. We then evaluate the risks posed by two different classes of modifications to the AM process which are representative of the challenges that are unique to AM. The risks posed are examined through mechanical testing of objects with altered printing orientation and fine internal defects. Finite element analysis and ultrasonic inspection are also used to demonstrate the potential for decreased performance and for evading detection. The results highlight several scenarios, intentional or unintentional, that can affect the product quality and pose security challenges for the additive manufacturing supply chain.

Additional Insights Into Problem Definition and Positioning From Social Science Comment on "Four Challenges That Global Health Networks Face".

PubMed

Quissell, Kathryn

2017-09-10

Commenting on a recent editorial in this journal which presented four challenges global health networks will have to tackle to be effective, this essay discusses why this type of analysis is important for global health scholars and practitioners, and why it is worth understanding and critically engaging with the complexities behind these challenges. Focusing on the topics of problem definition and positioning, I outline additional insights from social science theory to demonstrate how networks and network researchers can evaluate these processes, and how these processes contribute to better organizing, advocacy, and public health outcomes. This essay also raises multiple questions regarding these processes for future research. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

7 T renal MRI: challenges and promises.

PubMed

de Boer, Anneloes; Hoogduin, Johannes M; Blankestijn, Peter J; Li, Xiufeng; Luijten, Peter R; Metzger, Gregory J; Raaijmakers, Alexander J E; Umutlu, Lale; Visser, Fredy; Leiner, Tim

2016-06-01

The progression to 7 Tesla (7 T) magnetic resonance imaging (MRI) yields promises of substantial increase in signal-to-noise (SNR) ratio. This increase can be traded off to increase image spatial resolution or to decrease acquisition time. However, renal 7 T MRI remains challenging due to inhomogeneity of the radiofrequency field and due to specific absorption rate (SAR) constraints. A number of studies has been published in the field of renal 7 T imaging. While the focus initially was on anatomic imaging and renal MR angiography, later studies have explored renal functional imaging. Although anatomic imaging remains somewhat limited by inhomogeneous excitation and SAR constraints, functional imaging results are promising. The increased SNR at 7 T has been particularly advantageous for blood oxygen level-dependent and arterial spin labelling MRI, as well as sodium MR imaging, thanks to changes in field-strength-dependent magnetic properties. Here, we provide an overview of the currently available literature on renal 7 T MRI. In addition, we provide a brief overview of challenges and opportunities in renal 7 T MR imaging.

Effects of a Dissostichus mawsoni-CaM recombinant proteins feed additive on the juvenile orange-spotted grouper (Epinephelus coioides) under the acute low temperature challenge.

PubMed

Luo, Sheng-Wei; Wang, Wei-Na; Cai, Luo; Qi, Zeng-Hua; Wang, Cong; Liu, Yuan; Peng, Chang-Lian; Chen, Liang-Biao

2015-10-01

The effects of Dissostichus mawsoni-Calmodulin (Dm-CaM) on growth performance, enzyme activities, respiratory burst, MDA level and immune-related gene expressions of the orange-spotted grouper (Epinephelus coioides) exposed to the acute low temperature stress were evaluated. The commercial diet supplemented with Dm-CaM protein was fed to the groupers for 6 weeks. No significant difference was observed in the specific growth rates, weight gains and survivals. After the feeding trial, the groupers were exposed to acute low temperature challenge. The groupers fed with Dm-CaM additive diet showed a significant decrease in the respiratory burst activity, while the blood cell number increased significantly at 25 °C by comparing with the control and additive control group. The enzymatic activity of SOD, ACP and ALP increased significantly in Dm-CaM additive group, while MDA level maintained stable with the lowest value. qRT-PCR analysis indicated that the up-regulated transcript expressions of CaM, C3, SOD2, LysC and HSPA4 were observed in Dm-CaM additive group. These results indicated that Dm-CaM additive diet may regulate the grouper immune response to the acute low temperature challenge.

2015 Summer Design Challenge: Team A&E (2241) Additively Manufactured Discriminator.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Sarah E.; Moore, Brandon James

Current discriminator designs are based on historical designs and traditional manufacturing methods. The goal of this project was to form non-traditional groups to create novel discriminator designs by taking advantage of additive manufacturing. These designs would expand current discriminator designs and provide insight on the applicability of additive manufacturing for future projects. Our design stretched the current abilities of additive manufacturing and noted desired improvements for the future. Through collaboration with NSC, we noted several additional technologies which work well with additive manufacturing such as topology optimization and CT scanning and determined how these technologies could be improved to bettermore » combine with additive manufacturing.« less

Reconstructive challenges in war wounds

PubMed Central

Bhandari, Prem Singh; Maurya, Sanjay; Mukherjee, Mrinal Kanti

2012-01-01

War wounds are devastating with extensive soft tissue and osseous destruction and heavy contamination. War casualties generally reach the reconstructive surgery centre after a delayed period due to additional injuries to the vital organs. This delay in their transfer to a tertiary care centre is responsible for progressive deterioration in wound conditions. In the prevailing circumstances, a majority of war wounds undergo delayed reconstruction, after a series of debridements. In the recent military conflicts, hydrosurgery jet debridement and negative pressure wound therapy have been successfully used in the preparation of war wounds. In war injuries, due to a heavy casualty load, a faster and reliable method of reconstruction is aimed at. Pedicle flaps in extremities provide rapid and reliable cover in extremity wounds. Large complex defects can be reconstructed using microvascular free flaps in a single stage. This article highlights the peculiarities and the challenges encountered in the reconstruction of these ghastly wounds. PMID:23162233

Prevention of work disability due to musculoskeletal disorders: the challenge of implementing evidence.

PubMed

Loisel, Patrick; Buchbinder, Rachelle; Hazard, Rowland; Keller, Robert; Scheel, Inger; van Tulder, Maurits; Webster, Barbara

2005-12-01

The process of returning disabled workers to work presents numerous challenges. In spite of the growing evidence regarding work disability prevention, little uptake of this evidence has been observed. One reason for limited dissemination of evidence is the complexity of the problem, as it is subject to multiple legal, administrative, social, political, and cultural challenges. A literature review and collection of experts' opinion is presented, on the current evidence for work disability prevention, and barriers to evidence implementation. Recommendations are presented for enhancing implementation of research results. The current evidence regarding work disability prevention shows that some clinical interventions (advice to return to modified work and graded activity programs) and some non-clinical interventions (at a service and policy/community level but not at a practice level) are effective in reducing work absenteeism. Implementation of evidence in work disability is a major challenge because intervention recommendations are often imprecise and not yet practical for immediate use, many barriers exist, and many stakeholders are involved. Future studies should involve all relevant stakeholders and aim at developing new strategies that are effective, efficient, and have a potential for successful implementation. These studies should be based upon a clearer conceptualization of the broader context and inter-relationships that determine return to work outcomes.

Recommendations for provoked challenge urine testing.

PubMed

Ruha, Anne-Michelle

2013-12-01

"Urine mobilization test," "challenge test," and "provoked urine test" are all terms used to describe the administration of a chelating agent to a person prior to collection of their urine to test for metals. There is no standard, validated challenge test. Despite recommendations by professional and government organizations against the use of provoked urine testing, the tests are still commonly used and recommended by some practitioners. Challenge testing utilizes a variety of chelating agents, including dimercaptosuccinic acid (DMSA), dimercaptopropanesulfonate (DMPS), and ethylenediaminetetraacetic acid (EDTA). The agents are given by a variety of routes of administration, doses used are inconsistent, and urine collection procedures vary. Additional problems with challenge tests include comparison of results to inappropriate reference ranges and creatinine correction of urine obtained within hours of chelator administration. Human volunteer studies demonstrate that mercury is detected in the urine of most people even in the absence of known exposure or chelator administration, and that urinary mercury excretion rises after administration of a chelator, regardless of exposure history and in an unpredictable fashion. Studies also demonstrate that challenge testing fails to reveal a "body burden" of mercury due to remote exposure. Chelating agents have been associated with adverse reactions. Current evidence does not support the use of DMPS, DMSA, or other chelation challenge tests for the diagnosis of metal toxicity. Since there are no established reference ranges for provoked urine samples in healthy subjects, no reliable evidence to support a diagnostic value for the tests, and potential harm, these tests should not be utilized.

Bone Tissue Engineering: Recent Advances and Challenges

PubMed Central

Amini, Ami R.; Laurencin, Cato T.; Nukavarapu, Syam P.

2013-01-01

The worldwide incidence of bone disorders and conditions has trended steeply upward and is expected to double by 2020, especially in populations where aging is coupled with increased obesity and poor physical activity. Engineered bone tissue has been viewed as a potential alternative to the conventional use of bone grafts, due to their limitless supply and no disease transmission. However, bone tissue engineering practices have not proceeded to clinical practice due to several limitations or challenges. Bone tissue engineering aims to induce new functional bone regeneration via the synergistic combination of biomaterials, cells, and factor therapy. In this review, we discuss the fundamentals of bone tissue engineering, highlighting the current state of this field. Further, we review the recent advances of biomaterial and cell-based research, as well as approaches used to enhance bone regeneration. Specifically, we discuss widely investigated biomaterial scaffolds, micro- and nano-structural properties of these scaffolds, and the incorporation of biomimetic properties and/or growth factors. In addition, we examine various cellular approaches, including the use of mesenchymal stem cells (MSCs), embryonic stem cells (ESCs), adult stem cells, induced pluripotent stem cells (iPSCs), and platelet-rich plasma (PRP), and their clinical application strengths and limitations. We conclude by overviewing the challenges that face the bone tissue engineering field, such as the lack of sufficient vascularization at the defect site, and the research aimed at functional bone tissue engineering. These challenges will drive future research in the field. PMID:23339648

Additional Support Needs Policy in Scotland: Challenging or Reinforcing Social Inequality?

ERIC Educational Resources Information Center

Riddell, Sheila; Weedon, Elisabet

2016-01-01

This paper focuses on Scottish policy on additional support needs and its material outcomes. The central question addressed is the extent to which the Scottish additional support needs system undermines or reinforces existing social and economic inequalities. Administrative data highlight the inflation of the additional support needs category,…

The importance of taxonomic resolution for additive beta diversity as revealed through DNA barcoding.

PubMed

Bringloe, Trevor T; Cottenie, Karl; Martin, Gillian K; Adamowicz, Sarah J

2016-12-01

Additive diversity partitioning (α, β, and γ) is commonly used to study the distribution of species-level diversity across spatial scales. Here, we first investigate whether published studies of additive diversity partitioning show signs of difficulty attaining species-level resolution due to inherent limitations with morphological identifications. Second, we present a DNA barcoding approach to delineate specimens of stream caddisfly larvae (order Trichoptera) and consider the importance of taxonomic resolution on classical (additive) measures of beta (β) diversity. Caddisfly larvae were sampled using a hierarchical spatial design in two regions (subarctic Churchill, Manitoba, Canada; temperate Pennsylvania, USA) and then additively partitioned according to Barcode Index Numbers (molecular clusters that serve as a proxy for species), genus, and family levels; diversity components were expressed as proportional species turnover. We screened 114 articles of additive diversity partitioning and found that a third reported difficulties with achieving species-level identifications, with a clear taxonomic tendency towards challenges identifying invertebrate taxa. Regarding our own study, caddisfly BINs appeared to show greater subregional turnover (e.g., proportional additive β) compared to genus or family levels. Diversity component studies failing to achieve species resolution due to morphological identifications may therefore be underestimating diversity turnover at larger spatial scales.

Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

DOE PAGES

Raplee, Jake B.; Plotkowski, Alex J.; Kirka, Michael M.; ...

2017-03-03

To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in-situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. This developed a method for properly calibrating temperature profiles from thermographic data and then determining important characteristics of the build through additional processing. The thermographic data was analyzed to determinemore » the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, we calculated the thermal gradient and solid-liquid interface velocity and correlated it to microstructural variation within the part experimentally. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control.« less

Diagnostic challenges of childhood asthma.

PubMed

Bakirtas, Arzu

2017-01-01

Diagnosis of asthma in childhood is challenging. Both underdiagnosis and overdiagnosis of asthma are important issues. The present review gives information about challenging factors for an accurate diagnosis of childhood asthma. Although underdiagnosis of asthma in childhood has always been the most important diagnostic problem, overdiagnosis of asthma has also been increasingly recognized. This is probably due to diagnosis of asthma based on symptoms and signs alone. Demonstration of variable airflow obstruction by lung function tests is the most common asthma diagnostic tests used in practice and is therefore strongly recommended in children who can cooperate. Recently, an asthma guideline combining the clinical and economic evidences with sensitivity and specificity of diagnostic procedures was developed to improve accuracy of diagnosis and to avoid overdiagnosis. This guideline provided an algorithmic clinical and cost-effective approach and included fractional exhaled nitric oxide measurement as one of the diagnostic tests in addition to lung function. Diagnosis of asthma in children should be made by combining relevant history with at least two confirmatory diagnostic tests whenever possible. Diagnosis based on short-period treatment trials should be limited to young children who are unable to cooperate with these tests.

The effect of phytogenic feed additives to substitute in-feed antibiotics on growth traits and blood biochemical parameters in broiler chicks challenged with Salmonella typhimurium.

PubMed

Abudabos, Alaeldein M; Alyemni, Abdullah H; Dafalla, Yousif M; Khan, Rifat Ullah

2016-12-01

There is a growing concern over the use of antibiotics due to the increased resistance of pathogens in broiler. The present study was designed to find the comparative effect of an antibiotic, and some phytogenic on performance traits, blood biochemical parameters, and antioxidant status during starter phase exposed to Salmonella typhimurium challenge. A total of 560-day-old broiler chicks (Ross 308) were randomly allocated to seven treatments (eight replicates). Control (basal diet); T1, infected with Salmonella enterica subsp. typhimurium; T2, infected + avilamycin at the rate of 0.2 g/kg; T3, infected + essential oil of thymol; T4, infected + phytogenic; T5, infected + anti-Salmonella organic acid; and T6, infected + essential oils of thyme, anise, and other components. Body weight gain and feed conversion ratio (FCR) were significantly (P < 0.05) high in the T2 and T5 at the end of the first and the second week and similar to T4. During the second week, European production efficiency factor (EPEF) was also significantly (P < 0.05) high in T2, T4 and T5. Blood albumin increased significantly (P < 0.05) in birds of T2 in the first week, while during the second week, blood glucose and triglyceride concentration decreased significantly (P < 0.05) in T5. Blood ALT concentration decreased significantly (P < 0.05) in T6 compared to other treatments in the second week. Total antioxidant capacity (at the end of the second week) and thiobarbituric acid reactive substances (TBARS) did not change significantly. From the results of the present study, it was concluded that different feed additives could be substituted with antibiotics in the feed of broiler exposed to S. typhimurium challenge.

Digitalizing historical high resolution water level data: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Holinde, Lars; Hein, Hartmut; Barjenbruch, Ulrich

2017-04-01

Historical tide-gauge data offer the opportunities for determining variations in key characteristics for water level data and the analyses of past extreme events (storm surges). These information are important for calculating future trends and scenarios. But there are challenges involved due to the extensive effort needed to digitalize gauge sheets and quality control the resulting historical data. Based on these conditions, two main sources for inaccuracies in historical time series can be identified. First are several challenges due to the digitalization of the historical data, e.g. general quality of the sheets, multiple crossing lines of the observed water levels and additional comments on the sheet describing problems or additional information during the measurements. Second are problems during the measurements themselves. These can include the incorrect positioning of the sheets, trouble with the tide-gauge and maintenance. Errors resulting from these problems can be e.g. flat lines, discontinuities and outlier. Especially, the characterization of outliers has to be conducted carefully, to distinguish between real outliers and the appearance of extreme events. Methods for the quality control process involve the use of statistics, machine learning and neural networks. These will be described and applied to three different time series from tide gauge stations at the cost of Lower Saxony, Germany. Resulting difficulties and outcomes of the quality control process will be presented and explained. Furthermore, we will present a first glance at analyses for these time series.

Extreme limestone weathering rates due to micron-scale grain detachment

NASA Astrophysics Data System (ADS)

Emmanuel, Simon; Levenson, Yael

2014-05-01

Chemical dissolution is often assumed to control the weathering rates of carbonate rocks, although some studies have indicated that mechanical erosion could also play a significant role. Quantifying the rates of the different processes is challenging due to the high degree of variability encountered in both field and lab settings. To measure the rates and mechanisms controlling long-term limestone weathering, we analyse a lidar scan of the Western Wall, a Roman period edifice located in Jerusalem. Surface retreat rates in fine-grained micritic limestone blocks are found to be as much as 2 orders of magnitude higher than the average rates estimated for coarse-grained limestone blocks at the same site. In addition, in experiments that use atomic force microscopy to image dissolving micritic limestone, we show that these elevated reaction rates could be due to rapid dissolution along micron-scale grain boundaries, followed by mechanical detachment of tiny particles from the surface. Our analysis indicates that micron-scale grain detachment, rather than pure chemical dissolution, could be the dominant erosional mode for fine-grained carbonate rocks.

Hydrogel scaffolds for tissue engineering: Progress and challenges

PubMed Central

El-Sherbiny, Ibrahim M.; Yacoub, Magdi H.

2013-01-01

Designing of biologically active scaffolds with optimal characteristics is one of the key factors for successful tissue engineering. Recently, hydrogels have received a considerable interest as leading candidates for engineered tissue scaffolds due to their unique compositional and structural similarities to the natural extracellular matrix, in addition to their desirable framework for cellular proliferation and survival. More recently, the ability to control the shape, porosity, surface morphology, and size of hydrogel scaffolds has created new opportunities to overcome various challenges in tissue engineering such as vascularization, tissue architecture and simultaneous seeding of multiple cells. This review provides an overview of the different types of hydrogels, the approaches that can be used to fabricate hydrogel matrices with specific features and the recent applications of hydrogels in tissue engineering. Special attention was given to the various design considerations for an efficient hydrogel scaffold in tissue engineering. Also, the challenges associated with the use of hydrogel scaffolds were described. PMID:24689032

Identifying challenges in project consultants engagement practices

NASA Astrophysics Data System (ADS)

Shariffuddin, Nadia Alina Amir; Abidin, Nazirah Zainul

2017-10-01

Construction projects, green or conventional, involve multi-faceted disciplines engaged with the goal of delivering products i.e. building, infrastructure etc. at the best quality within stipulated budgets. For green projects, additional attention is added for environmental quality. Due to the various responsibilities and liabilities involved as well as the complexity of the construction process itself, formal engagement of multi-disciplinary professionals i.e. project consultants is required in any construction project. Poor selection of project consultants will lead to a multitude of complications resulting in delay, cost escalation, conflicts and poor quality. This paper explores the challenges that occur during the engagement of project consultants in a green project. As the engagement decision involves developers and architects, these two groups of respondents with green project backgrounds were approached qualitatively using interview technique. The challenges identified are limited experience and knowledge, consultants' fee vs. quality, green complexity, conflicts of interest, clients' extended expectation and less demand in green projects. The construction shifts to green project demands engagement of project consultants with added skills. It is expected that through the identification of challenges, better management and administration can be created which would give impact to the overall process of engagement in green projects.

Additive Layer Manufacturing for Launcher's Applications

NASA Astrophysics Data System (ADS)

Vilanova, J.; Romera, P.; Lasagni, F.; Zorrilla, A.; Perinan, A.

2014-06-01

In the next years the European space industry has the challenge of maintaining its competitiveness in launch vehicles (LV) production, due to the growth of competition worldwide. It has to assure its position developing new applied technologies. In this field the effort is focussed on the production of short series of customized products, like payloads, flight components or launcher parts. ALM (Additive Layer Manufacturing) could be a powerful tool that offers new competitiveness factors for this industry, comprising a set of emerging technologies that are becoming a competitor to forming, casting and machining as well as being utilised directly as a complementary alternative.Originally used for prototypes and models, now ALM becomes a very useful technology capable to fabricate functional parts for the space industrial sector. Its demands on rapid technologies are different to "earth" industries, and they aren't so easily satisfied because space is a field with different requirements depending on its application: launchers, reusable vehicles, satellites, probes, low gravity researches, manned spacecraft, or even moon and planetary exploration.This paper reports on the ALM potential applications, under ESA requirements, exploring the challenges and possibilities for its use in the launchers market, trying to answer two basic questions: the first one, whether ALM is a mature technology to be ready for its use as flight hardware; and the second one, if it can be used to reduce the product cycle, and consequently, the development, production and operational costs.

[Pneumoperitoneum due to splenic abscess: a diagnostic challenge. Case Report].

PubMed

Peña-Ros, Emilio; Méndez-Martínez, Marcelino; Vicente-Ruiz, María; Sánchez-Cifuentes, Ángela; Martínez-Sanz, Nuria; Albarracín Marín-Blázquez, Antonio

2015-01-01

Splenic abscess is a rare clinic entity, its incidence has increased due to the rising number of clinical conditions involving immunosuppression. Endocarditis is the most frequent cause, and gram-positive aerobes are the main causal agents. Its clinical presentation is non-specific and delays diagnosis. Computed tomography scan is the method of choice, and the treatment is based on antibiotics and drainage, radiological or surgical, involving splenectomy in special cases that require it. A 55-year-old man with abdominal pain and fever. The analysis revealed leukocytosis 14,000/mm3, prothrombin activity 53%, and metabolic acidosis. Computed tomography scan showed a peri-hepatic pneumoperitoneum, liquid fluid, and peri-splenic bubbles, and slight trabeculation of fat around the duodenal bulb with pneumoperitoneum in this area. Patient underwent a median laparotomy, finding a purulent peritonitis due to a ruptured abscess in the spleen, splenectomy was performed. Fluid culture showed polymorphonuclears, with no microorganisms identified. The patient progressed and was discharged on the 5th post-operative day. Splenic abscess is an uncommon condition, in which the diagnosis is delayed and mortality, in untreated patients, is high. Its association with pneumoperitoneum may confuse the diagnosis towards viscera perforation. Thus it must be suspected in the finding of unknown cause of pneumoperitoneum by complementary examinations. The treatment of choice is splenectomy, because the capsular rupture is the norm in all of them. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

Current Challenges in Commercially Producing Biofuels from Lignocellulosic Biomass

PubMed Central

Balan, Venkatesh

2014-01-01

Biofuels that are produced from biobased materials are a good alternative to petroleum based fuels. They offer several benefits to society and the environment. Producing second generation biofuels is even more challenging than producing first generation biofuels due the complexity of the biomass and issues related to producing, harvesting, and transporting less dense biomass to centralized biorefineries. In addition to this logistic challenge, other challenges with respect to processing steps in converting biomass to liquid transportation fuel like pretreatment, hydrolysis, microbial fermentation, and fuel separation still exist and are discussed in this review. The possible coproducts that could be produced in the biorefinery and their importance to reduce the processing cost of biofuel are discussed. About $1 billion was spent in the year 2012 by the government agencies in US to meet the mandate to replace 30% existing liquid transportation fuels by 2022 which is 36 billion gallons/year. Other countries in the world have set their own targets to replace petroleum fuel by biofuels. Because of the challenges listed in this review and lack of government policies to create the demand for biofuels, it may take more time for the lignocellulosic biofuels to hit the market place than previously projected. PMID:25937989

Current Challenges in Commercially Producing Biofuels from Lignocellulosic Biomass

DOE PAGES

Balan, Venkatesh

2014-01-01

Biofuels that are produced from biobased materials are a good alternative to petroleum based fuels. They offer several benefits to society and the environment. Producing second generation biofuels is even more challenging than producing first generation biofuels due the complexity of the biomass and issues related to producing, harvesting, and transporting less dense biomass to centralized biorefineries. In addition to this logistic challenge, other challenges with respect to processing steps in converting biomass to liquid transportation fuel like pretreatment, hydrolysis, microbial fermentation, and fuel separation still exist and are discussed in this review. The possible coproducts that could be producedmore » in the biorefinery and their importance to reduce the processing cost of biofuel are discussed. About $1 billion was spent in the year 2012 by the government agencies in US to meet the mandate to replace 30% existing liquid transportation fuels by 2022 which is 36 billion gallons/year. Other countries in the world have set their own targets to replace petroleum fuel by biofuels. Because of the challenges listed in this review and lack of government policies to create the demand for biofuels, it may take more time for the lignocellulosic biofuels to hit the market place than previously projected.« less

Migrants and Refugees in Europe: Challenges, Experiences and Contributions.

PubMed

Schilling, Tobias; Rauscher, Stephan; Menzel, Christian; Reichenauer, Simon; Müller-Schilling, Martina; Schmid, Stephan; Selgrad, Michael

2017-08-01

Due to the current geopolitical situation more refugees from crisis countries were and will be treated in Europe. In 2015 the number of displaced people reached an unprecedented level, with more than one million crossing into Europe. The migration itself can impair both mental and physical health. Therefore, the provision of medical care for refugees and migrants is a novel and major challenge for the health care systems in Europe. In this article we describe our experiences and contribution in providing medical care for refugees who have newly arrived in Stuttgart, Baden-Wuerttemberg, Germany. Furthermore, we report our experiences from a tertiary referral University center in Regensburg, Bavaria, Germany. We focus on challenges in both the outpatient and the inpatient setting, with a special focus on intensive care patients. In addition, we provide an overview about the spectrum of diseases in this specific patient cohort.

Influence of methane addition on selenium isotope sensitivity and their spectral interferences.

PubMed

Floor, Geerke H; Millot, Romain; Iglesias, Mónica; Négrel, Philippe

2011-02-01

The measurements of stable selenium (Se) isotopic signatures by multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) are very challenging, due to the presence of spectral interferences and the low abundance of Se in environmental samples. We systematically investigated the effect of methane addition on the signal of Se isotopes and their interferences. It is the first time that the effect of methane addition has been assessed for all Se isotopes and its potential interferences using hydride generator multi-collector inductively coupled plasma mass spectrometry (HG-MC-ICP-MS). Our results show that a small methane addition increases the sensitivity. However, the response differs between a hydride generator and a standard introduction system, which might be related to differences in the ionization processes. Both argon and hydrogen-based interferences, the most common spectral interferences on selenium isotopes in HG-MC-ICP-MS, decrease with increasing methane addition. Therefore, analyte-interference ratios and precision are improved. Methane addition has thus a high potential for the application to stable Se isotopes ratios by HG-MC-ICP-MS. Copyright © 2011 John Wiley & Sons, Ltd.

Decrease in corneal damage due to benzalkonium chloride by the addition of sericin into timolol maleate eye drops.

PubMed

Nagai, Noriaki; Ito, Yoshimasa; Okamoto, Norio; Shimomura, Yoshikazu

2013-01-01

We investigated the protective effects of sericin on corneal damage due to benzalkonium chloride (BAC) used as a preservative in commercially available timolol maleate eye drops using rat debrided corneal epithelium and a human cornea epithelial cell line (HCE-T). Corneal wounds were monitored using a fundus camera TRC-50X equipped with a digital camera; eye drops were instilled into the rat eyes five times a day after corneal epithelial abrasion. The viability of HCE-T cells was calculated by TetraColor One; and Escherichia coli (ATCC 8739) were used to measure antimicrobial activity. The reducing effects on transcorneal penetration and intraocular pressure (IOP) of the eye drops were determined using rabbits. The corneal wound healing rate and rate constants (kH) as well as cell viability were higher following treatment with 0.005% BAC solution containing 0.1% sericin than in the case of treatment with BAC solution alone; the antimicrobial activity was approximately the same for BAC solutions with and without sericin. In addition, the kH for rat eyes instilled with commercially available timolol maleate eye drops containing 0.1% sericin was significantly higher than that of eyes instilled with timolol maleate eye drops without sericin, and the addition of sericin did not affect the corneal penetration or IOP reducing effect of commercially available timolol maleate eye drops. A preservative system comprising BAC and sericin may provide effective therapy for glaucoma patients requiring long-term anti-glaucoma agents.

High-Stakes Testing in the Warm Heart of Africa: The Challenges and Successes of the Malawi National Examinations Board

ERIC Educational Resources Information Center

Chakwera, Elias; Khembo, Dafter; Sireci, Stephen G.

2004-01-01

In the United States, tests are held to high standards of quality. In developing countries such as Malawi, psychometricians must deal with these same high standards as well as several additional pressures such as widespread cheating, test administration difficulties due to challenging landscapes and poor resources, difficulties in reliably scoring…

Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing.

PubMed

Raplee, J; Plotkowski, A; Kirka, M M; Dinwiddie, R; Okello, A; Dehoff, R R; Babu, S S

2017-03-03

To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. The purpose of the present study was to develop a method for properly calibrating temperature profiles from thermographic data to account for this emittance change and to determine important characteristics of the build through additional processing. The thermographic data was analyzed to identify the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, the thermal gradient and solid-liquid interface velocity were approximated and correlated to experimentally observed microstructural variation within the part. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control.

Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

PubMed Central

Raplee, J.; Plotkowski, A.; Kirka, M. M.; Dinwiddie, R.; Okello, A.; Dehoff, R. R.; Babu, S. S.

2017-01-01

To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. The purpose of the present study was to develop a method for properly calibrating temperature profiles from thermographic data to account for this emittance change and to determine important characteristics of the build through additional processing. The thermographic data was analyzed to identify the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, the thermal gradient and solid-liquid interface velocity were approximated and correlated to experimentally observed microstructural variation within the part. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control. PMID:28256595

Construction of a nontoxigenic Clostridium botulinum strain for food challenge studies.

PubMed

Bradshaw, Marite; Marshall, Kristin M; Heap, John T; Tepp, William H; Minton, Nigel P; Johnson, Eric A

2010-01-01

Clostridium botulinum produces the most poisonous natural toxin known and is a perennial concern to the food industry and to regulatory agencies due to the potential threat of food-borne botulism. To ensure the botulinal safety of foods, rigorous food challenge testing to validate food-processing conditions and food formulations has been routinely performed. Detection of the botulinum neurotoxin is performed by using a mouse bioassay and/or in vitro assays. There has been considerable interest by the food industry and regulatory agencies in minimizing or even replacing the use of animals in these challenge studies. In addition, due to stringent select-agent regulations, the testing of various foods using toxigenic C. botulinum strains requires facilities and personnel that are certified for work with this organism. For this purpose we propose to generate sets of nontoxigenic C. botulinum strains from proteolytic and nonproteolytic groups that differ from the wild-type strains only by their inability to produce botulinum neurotoxin. In this initial study we describe the generation of a nontoxigenic mutant of C. botulinum strain 62A using the ClosTron mutagenesis system by inserting a group II intron into the botulinum neurotoxin type A gene (bont/A). The mutant clones were nontoxigenic as determined by Western blots and mouse bioassays but showed physiological characteristics, including growth properties and sporulation, that were similar to those of the parent strain in laboratory media. Additional studies will be required to evaluate comparable characteristics in various food matrices. The availability of suitable nontoxigenic C. botulinum strains for food challenge studies will be beneficial for enhancing the botulinal safety of foods as well as increasing the biosafety of workers and may eliminate the use of laboratory animals.

Sustainability Characterization for Additive Manufacturing

PubMed Central

Mani, Mahesh; Lyons, Kevin W; Gupta, SK

2014-01-01

Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

Sustainability Characterization for Additive Manufacturing.

PubMed

Mani, Mahesh; Lyons, Kevin W; Gupta, S K

2014-01-01

Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

Challenges with Evidence-Based Management of Stable Ischemic Heart Disease.

PubMed

Patel, Amit V; Bangalore, Sripal

2017-02-01

Stable ischemic heart disease (SIHD) is a highly prevalent condition associated with increased costs, morbidity, and mortality. Management goals of SIHD can broadly be thought of in terms of improving prognosis and/or improving symptoms. Treatment options include medical therapy as well as revascularization, either with percutaneous coronary intervention or coronary artery bypass grafting. Herein, we will review the current evidence base for treatment of SIHD as well as its challenges and discuss ongoing studies to help address some of these knowledge gaps. There has been no consistent reduction in death or myocardial infarction (MI) with revascularization vs. medical therapy in patients with SIHD in contemporary trials. Angina and quality of life have been shown to be relieved more rapidly with revascularization vs. optimal medical therapy; however, the durability of these results is uncertain. There have been challenges and limitations in several of the trials addressing the optimal treatment strategy for SIHD due to potential selection bias (due to knowledge of coronary anatomy prior to randomization), patient crossover, and advances in medical therapy and revascularization strategies since trial completion. The challenges inherent to prior trials addressing the optimal management strategy for SIHD have impacted the generalizability of results to real-world cohorts. Until the results of additional ongoing trials are available, the decision for revascularization or medical therapy should be based on patients' symptoms, weighing the risks and benefits of each approach, and patient preference.

Promises and Challenges of Thorium Implementation for Transuranic Transmutation - 13550

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franceschini, F.; Lahoda, E.; Wenner, M.

2013-07-01

This paper focuses on the challenges of implementing a thorium fuel cycle for recycle and transmutation of long-lived actinide components from used nuclear fuel. A multi-stage reactor system is proposed; the first stage consists of current UO{sub 2} once-through LWRs supplying transuranic isotopes that are continuously recycled and burned in second stage reactors in either a uranium (U) or thorium (Th) carrier. The second stage reactors considered for the analysis are Reduced Moderation Pressurized Water Reactors (RMPWRs), reconfigured from current PWR core designs, and Fast Reactors (FRs) with a burner core design. While both RMPWRs and FRs can in principlemore » be employed, each reactor and associated technology has pros and cons. FRs have unmatched flexibility and transmutation efficiency. RMPWRs have higher fuel manufacturing and reprocessing requirements, but may represent a cheaper solution and the opportunity for a shorter time to licensing and deployment. All options require substantial developments in manufacturing, due to the high radiation field, and reprocessing, due to the very high actinide recovery ratio to elicit the claimed radiotoxicity reduction. Th reduces the number of transmutation reactors, and is required to enable a viable RMPWR design, but presents additional challenges on manufacturing and reprocessing. The tradeoff between the various options does not make the choice obvious. Moreover, without an overarching supporting policy in place, the costly and challenging technologies required inherently discourage industrialization of any transmutation scheme, regardless of the adoption of U or Th. (authors)« less

The real challenges: the orphan generation and employment creation.

PubMed

Whiteside, A

2000-01-01

A baby born to an HIV-positive mother has close to a 100% chance of being orphaned before reaching the age of 10. In South Africa, nearly 1 million children under the age of 15 are projected to lose their mothers by 2005 due to AIDS. These orphans are less likely to receive adequate parenting, education, and nutrition; others will seek to survive on the streets and thus will be more likely to face sexual abuse and exploitation. The long-term impact of HIV/AIDS on both the children and society will be severe. The orphans that AIDS is creating pose serious social, economic, political, and developmental challenges for South Africa. There are two options left for the government: 1) dramatically increasing welfare grants and staffing of welfare departments in order to care for the orphans; 2) find new imaginative measures of meeting the challenge. In addition, provision of employment for its population is another challenge the region is facing. Having the required resources and infrastructure, a potential intervention for South Africa would be training and employing a new cadre of workers to care for AIDS orphans. This type of response would also help build a civil society.

Multi-GNSS Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Al-Shaery, A.; Zhang, S.; Lim, S.; Rizos, C.

2012-04-01

The multi-GNSS era has began attracting more attention with the declaration of full operational capability of GLONASS , with a 24 satellites being set to 'healthy' on December 8th 2011 (IAC, 2011). This means that GPS is no longer the only GNSS that provides global positioning coverage. This status brings benefits for GNSS users in areas (e.g. 'urban canyon' environments or in deep open cut mines) where the number of visible satellites is limited because of shadowing effects. In such areas adding more functioning satellites, which is one of the aiding solutions, becomes easier, at no extra cost. The inclusion of GLONASS observations in positioning solutions will increase the available number of satellites and thus positioning accuracy may improve as a result of enhanced overall satellite geometry. Such an aiding solution is increasingly attractive due to the successful revitalisation of GLONASS. Another motivation is the availability of improved GLONASS orbits from the IGS and individual analysis centres of the IGS. The increasing availability of receivers with GPS/GLONASS tracking capability on the market is an additional motive. Consequently, most networks of continuously operating reference stations (CORS) are now equipped with receivers that can track both GPS and GLONASS satellite signals, and therefore network-based positioning with combined GPS and GLONASS observations is possible. However, adding GLONASS observations to GPS is not a straight forward process. This is attributable to a few system differences in reference frames for time and coordinates, and in signal structures. The first two differences are easy to deal with using well-defined conversion and transformation parameters (El-Mowafy, 2001). However, signal structure differences have some implications. The mathematical modelling of combined GPS/GLONASS observations is not performed as in the case of GPS-alone. Special care should be paid to such integration. Not only is the software part affected

[Airway management in Ludwig's angina - a challenge: case report].

PubMed

Fellini, Roberto Taboada; Volquind, Daniel; Schnor, Otávio Haygert; Angeletti, Marcelo Gustavo; Souza, Olívia Egger de

Ludwig's angina (LA) is an infection of the submandibular space, first described by Wilhelm Frederick von Ludwig in 1836. It represents an entity difficult to manage due to the rapid progression and difficulty in maintaining airway patency, a major challenge in medical practice, resulting in asphyxia and death in 8-10% of patients. Describe a case of a patient with Ludwig's angina undergoing surgery, with emphasis on airway management, in addition to reviewing the articles published in the literature on this topic. Male patient, 21 years, drug addict, admitted by the emergency department and diagnosed with LA. Difficult airway was identified during the anesthetic examination. In additional tests, significant deviation from the tracheal axis was seen. Undergoing bilateral thoracoscopic pleural drainage, we opted for airway management through tracheal intubation using fiberoptic bronchoscopy, and balanced general anesthesia was proposed. There were no complications during the surgical-anesthetic act. After the procedure, the patient remained intubated and mechanically ventilated in the intensive care unit. Airway management in patients with Ludwig's angina remains challenging. The choice of the safest technique should be based on clinical signs, technical conditions available, and the urgent need to preserve the patient's life. Copyright © 2015 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.

The development of additive manufacturing technique for nickel-base alloys: A review

NASA Astrophysics Data System (ADS)

Zadi-Maad, Ahmad; Basuki, Arif

2018-04-01

Nickel-base alloys are an attractive alloy due to its excellent mechanical properties, a high resistance to creep deformation, corrosion, and oxidation. However, it is a hard task to control performance when casting or forging for this material. In recent years, additive manufacturing (AM) process has been implemented to replace the conventional directional solidification process for the production of nickel-base alloys. Due to its potentially lower cost and flexibility manufacturing process, AM is considered as a substitute technique for the existing. This paper provides a comprehensive review of the previous work related to the AM techniques for Ni-base alloys while highlighting current challenges and methods to solving them. The properties of conventionally manufactured Ni-base alloys are also compared with the AM fabricated alloys. The mechanical properties obtained from tension, hardness and fatigue test are included, along with discussions of the effect of post-treatment process. Recommendations for further work are also provided.

The Store Challenge

ERIC Educational Resources Information Center

Roman, Harry T.

2014-01-01

Biomedical and robotic technologies are merging to present a wonderful opportunity to develop artificial limbs and prosthetic devices for humans injured on the job, in the military, or due to disease. In this challenge, students will have the opportunity to design a store or online service that specifically dedicates itself to amputees. Described…

Campus Challenge - Part 2: Benefits and Challenges of BACnet

DOE PAGES

Masica, Ken

2016-01-15

Additional challenges of implementing a BACnet network in a large campus environment are explored in this article: providing BACnet campus connectivity, protecting BACnet network traffic, and controlling the resulting broadcast traffic. An example of BACnet implementation is also presented, unifying concepts presented in this and Part One of the article.

Food-additive-induced urticaria: a survey of 838 patients with recurrent chronic idiopathic urticaria.

PubMed

Di Lorenzo, Gabriele; Pacor, Maria Luisa; Mansueto, Pasquale; Martinelli, Nicola; Esposito-Pellitteri, Maria; Lo Bianco, Claudia; Ditta, Vito; Leto-Barone, Maria Stefania; Napoli, Nicola; Di Fede, Gaetana; Rini, Giovambattista; Corrocher, Roberto

2005-11-01

Recurrent chronic idiopathic urticaria (RCIU) is a common skin condition that affects 0.1-3% of the population in the USA and Europe and accounts for nearly 75% of all 'ordinary' chronic urticaria (CU) cases. We studied 838 consecutive patients with RCIU referred to hospital between 1998 and 2003. Patients with known causes of CU were excluded. Clinical history, physical examination, and symptom diaries were evaluated during two periods, a diet-free period (1 week) and a food-additive-free diet (FAFD) period (4 weeks), respectively, and two double-blind placebo-controlled (DBPC) challenges of six food additives were administered. The first DBPC challenge included a mixture of the six food additives (DBPCmixed) given to all patients. The second DBPC challenge comprised the single food additives, administered at increasing doses (DBPCsingle) to patients with a positive DBPCmixed test and 105 patients with a negative DBPCmixed test, as a control. The DBPCmixed challenge was positive in 116 patients. None of the 105 control patients had a positive DBPCsingle test. Only 31 DBPCsingle tests were positive in patients with positive DBPCmixed challenge. Twenty-four of the 116 patients showing a positive DBPCmixed challenge also had a positive DBPCsingle result. Our results confirmed that food additive hypersensitivity reactions occurred in few RCIU patients using DBPCsingle challenge. The combination of the results of FAFD and DBPCmixed challenge seems to be of considerable practical interest for allergists, internists and dermatologists, rather than the data of clinical history and the results of DBPCsingle challenge, in patients with RCIU. Copyright (c) 2005 S. Karger AG, Basel.

Addition Table of Colours: Additive and Subtractive Mixtures Described Using a Single Reasoning Model

ERIC Educational Resources Information Center

Mota, A. R.; Lopes dos Santos, J. M. B.

2014-01-01

Students' misconceptions concerning colour phenomena and the apparent complexity of the underlying concepts--due to the different domains of knowledge involved--make its teaching very difficult. We have developed and tested a teaching device, the addition table of colours (ATC), that encompasses additive and subtractive mixtures in a single…

Modeling of additive manufacturing processes for metals: Challenges and opportunities

DOE PAGES

Francois, Marianne M.; Sun, Amy; King, Wayne E.; ...

2017-01-09

Here, with the technology being developed to manufacture metallic parts using increasingly advanced additive manufacturing processes, a new era has opened up for designing novel structural materials, from designing shapes and complex geometries to controlling the microstructure (alloy composition and morphology). The material properties used within specific structural components are also designable in order to meet specific performance requirements that are not imaginable with traditional metal forming and machining (subtractive) techniques.

Spontaneous rupture of the spleen due to infectious mononucleosis.

PubMed

Farley, D R; Zietlow, S P; Bannon, M P; Farnell, M B

1992-09-01

Spontaneous splenic rupture is an extremely rare but life-threatening complication of infectious mononucleosis in young adults. Although splenectomy remains effective treatment, reports of successful nonoperative management have challenged the time-honored approach of emergent laparotomy. On retrospective analysis of our institutional experience with 8,116 patients who had this disease during a 40-year period, we found 5 substantiated cases of atraumatic splenic rupture due to infectious mononucleosis. Four additional cases of suspected splenic rupture were noted. All nine patients were hospitalized and treated (seven underwent splenectomy and two were treated with supportive measures only), and they remain alive and well. In patients with infectious mononucleosis suspected of having rupture of the spleen, a rapid but thorough assessment and prompt implementation of appropriate management should minimize the associated morbidity and mortality. On the basis of review of the medical literature and careful scrutiny of our own experience, we advocate emergent splenectomy for spontaneous splenic rupture in patients with infectious mononucleosis.

Galvanometer scanning technology for laser additive manufacturing

NASA Astrophysics Data System (ADS)

Luo, Xi; Li, Jin; Lucas, Mark

2017-02-01

A galvanometer laser beam scanning system is an essential element in many laser additive manufacturing (LAM) technologies including Stereolithography (SLA), Selective Laser Sintering (SLS) and Selective Laser Melting (SLM). Understanding the laser beam scanning techniques and recent innovations in this field will greatly benefit the 3D laser printing system integration and technology advance. One of the challenges to achieve high quality 3D printed parts is due to the non-uniform laser power density delivered on the materials caused by the acceleration and deceleration movements of the galvanometer at ends of the hatching and outlining patterns. One way to solve this problem is to modulate the laser power as the function of the scanning speed during the acceleration or deceleration periods. Another strategy is to maintain the constant scanning speed while accurately coordinating the laser on and off operation throughout the job. In this paper, we demonstrate the high speed, high accuracy and low drift digital scanning technology that incorporates both techniques to achieve uniform laser density with minimal additional process development. With the constant scanning speed method, the scanner not only delivers high quality and uniform results, but also a throughput increase of 23% on a typical LAM job, compared to that of the conventional control method that requires galvanometer acceleration and deceleration movements.

Exploration Rover Concepts and Development Challenges

NASA Technical Reports Server (NTRS)

Zakrajsek, James J.; McKissock, David B.; Woytach, Jeffrey M.; Zakrajsek, June F.; Oswald, Fred B.; McEntire, Kelly J.; Hill, Gerald M.; Abel, Phillip; Eichenberg, Dennis J.; Goodnight, Thomas W.

2005-01-01

This paper presents an overview of exploration rover concepts and the various development challenges associated with each as they are applied to exploration objectives and requirements for missions on the Moon and Mars. A variety of concepts for surface exploration vehicles have been proposed since the initial development of the Apollo-era lunar rover. This paper provides a brief description of the rover concepts, along with a comparison of their relative benefits and limitations. In addition, this paper outlines, and investigates a number of critical development challenges that surface exploration vehicles must address in order to successfully meet the exploration mission vision. These include: mission and environmental challenges, design challenges, and production and delivery challenges. Mission and environmental challenges include effects of terrain, extreme temperature differentials, dust issues, and radiation protection. Design methods are discussed that focus on optimum methods for developing highly reliable, long-life and efficient systems. In addition, challenges associated with delivering a surface exploration system is explored and discussed. Based on all the information presented, modularity will be the single most important factor in the development of a truly viable surface mobility vehicle. To meet mission, reliability, and affordability requirements, surface exploration vehicles, especially pressurized rovers, will need to be modularly designed and deployed across all projected Moon and Mars exploration missions.

The Challenge of Producing Fiber-Based Organic Electronic Devices

PubMed Central

Könyves-Toth, Tobias; Gassmann, Andrea; von Seggern, Heinz

2014-01-01

The implementation of organic electronic devices on fibers is a challenging task, not yet investigated in detail. As was shown earlier, a direct transition from a flat device structure to a fiber substrate is in principle possible. However, a more detailed investigation of the process reveals additional complexities than just the transition in geometry. It will be shown, that the layer formation of evaporated materials behaves differently due to the multi-angled incidence on the fibers surface. In order to achieve homogenous layers the evaporation process has to be adapted. Additionally, the fiber geometry itself facilitates damaging of its surface due to mechanical impact and leads to a high surface roughness, thereby often hindering commercial fibers to be used as substrates. In this article, a treatment of commercial polymer-coated glass fibers will be demonstrated that allows for the fabrication of rather flexible organic light-emitting diodes (OLEDs) with cylindrical emission characteristics. Since OLEDs rely the most on a smooth substrate, fibers undergoing the proposed treatment are applicable for other organic electronic devices such as transistors and solar cells. Finally, the technique also supports the future fabrication of organic electronics not only in smart textiles and woven electronics but also in bent surfaces, which opens a wide range of applications. PMID:28788128

Advanced electrolyte/additive for lithium-ion batteries with silicon anode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Shuo; He, Meinan; Su, Chi-Cheung

State-of-the-art lithium-ion batteries (LIBs) are based on a lithium transition metal oxide cathode, a graphite anode and a nonaqueous carbonate electrolyte. To further increase the energy and power density of LIBs, silicon anodes have been intensively explored due to their high theoretical capacity, low operation potential, and low cost. However, the main challenges for Si anode are the large volume change during lithiation/delithiation process and the instability of the solid-electrolyte-interphase associated with this process. Recently, significant progress has been achieved via advanced material fabrication technologies and rational electrolyte design in terms of improving the Coulombic efficiency and capacity retention. Inmore » this paper, new developments in advanced electrolyte and additive for LIBs with Si anode were systematically reviewed, and perspectives over future research were suggested.« less

75 FR 58366 - Procurement List Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

... Center, Great Lakes, IL. NPA: Challenge Unlimited, Inc., Alton, IL. Contracting Activity: Dept of the... AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Additions to the Procurement List. SUMMARY: This action adds services to the Procurement List that will be provided by...

Mars outpost - System and operations challenges

NASA Technical Reports Server (NTRS)

Roberts, Barney; Guerra, Lisa

1990-01-01

The paper addresses the challenges inherent in establishing an outpost on the planet Mars. For background purposes, the unique, remote Martian environment and the developmental phases of a settlement in such an environment are discussed. Challenges are identified in terms of surface systems and operations. Due to its importance to habitability, the life support system (LSS) is highlighted with various options identified. Operations for the Mars outpost, earth-based and local, are characterized by a decentralized concept. The challenge of integrating logistics analysis early in system design and operations strategy is also addressed. In order to understand and reduce the system and operations challenges, the application of terrestrial and lunar testbeds is explained.

Challenges in teaching modern manufacturing technologies

NASA Astrophysics Data System (ADS)

Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

2015-07-01

Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in executing various projects. Lectures are developed to contain materials featuring advanced manufacturing technologies, R&D trends in manufacturing. Pre- and post-surveys were conducted by an external evaluator to assess the impact of the course on increase in student's knowledge of manufacturing; increase students' preparedness and confidence in effective communication and; increase students' interest in pursuing additional academic studies and/or a career path in manufacturing and high technology. The surveyed data indicate that the students perceived significant gains in manufacturing knowledge and preparedness in effective communication. The study also shows that implementation of a collaborative course within multiple institutions requires a robust and collective communication platform.

Stresses and Challenges for New Graduates in Hospitals.

ERIC Educational Resources Information Center

Oermann, Marilyn H.; Garvin, Michael F.

2002-01-01

Recent nursing graduates (n=46) rated stresses and challenges in clinical practice. Stressors included not feeling competent/confident, making mistakes due to increased workload, and encountering new situations. Challenges included applying knowledge to practice and acquiring new skills. Most emotions were positive but anxiety was frequent. Ways…

Prevalence of sensitivity to food and drug additives in patients with chronic idiopathic urticaria.

PubMed

Rajan, Jessica P; Simon, Ronald A; Bosso, John V

2014-01-01

Chronic idiopathic urticaria (CIU) is defined as the presence of urticaria most days of the week for a period of 6 weeks or longer. There have been reports of food additive sensitivity in CIU previously, but the prevalence has not been precisely determined. To determine the prevalence of reactions to food and drug additives in patients with CIU. We challenged 100 patients in our allergy/immunology division with CIU to the 11 additives most commonly associated with reactions: tartrazine (FD&C Yellow 5), potassium metabisulfite, monosodium glutamate, aspartame, sodium benzoate, methyl paraben, butylated hydroxy anisole, butylated hydroxy toluene, FD&C Yellow 6, sodium nitrate, sodium nitrite. All of the patients had a history of CIU for longer than 6 weeks, and 43 reported possible history of food or drug additive sensitivity. Single-blind challenges to all of the additives were performed in the clinic and skin scores were recorded. Subjects with positive challenge tests underwent double-blind placebo controlled challenges. Of 100 subjects, only 2 had a positive urticarial response on single-blind challenge. Neither of these patients had a positive urticarial response on double-blind placebo-controlled challenge. There were no gastrointestinal, respiratory, or other symptom, and no patients reported late reactions. We were able to conclude, with 95% confidence intervals that sensitivity to any of the 11 food and drug additives occurs in fewer than 1% of patients with CIU. Food and drug additives appear to be a rare cause of CIU, and avoidance is not recommended. Copyright © 2013 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Reduced vital capacity after methacholine challenge in early childhood--is it due to trapped air or loss of motivation.

PubMed

Vilozni, Daphna; Hakim, Fahed; Adler, Adi; Livnat, Galit; Bar-Yishay, Ephraim; Bentur, Lea

2009-01-01

In a previous study we assessed the feasibility of measuring bronchial-reactivity (BHR) in young asthmatic children by the determination of PC(20)-FEV(1) along with clinical end-of-test criteria during a methacholine challenge test (MCT). The end-point was associated with a significant reduction in both flow and vital capacity values. The findings could be due to the children's loss of motivation, which may preclude use of this test. Alternatively, if it reflects air trapping during airway obstruction, it might reinforce its applicability in preschool age children. To elucidate the mechanism of low vital capacity at PC(20)-FEV(1) in preschool age children. Twenty-eight children (3.3-6.9 years) with recurrent respiratory symptoms. An MCT was carried out using tripling doses (0.06-13.9 mg/ml) delivered by a dosimeter. Spirometry was measured at baseline and after each inhalation in duplicate sets. Whole body plethysmography was measured at baseline and at end-of-test (defined by clinical criteria) according to the recommendations for older populations. Plethysmography was reliably performed by 20 children before and after MCT. At baseline, lung function was within the healthy range. At end-of-test (PC(20)-FEV(1)=4.02+/-3.47 mg/ml), the spirometry parameters and specific conductance values were markedly reduced in correlation with a significant increase in residual volume and resistance. The study shows that diminished vital capacity is due to the increase in FRC at end-of-test. Our findings support the use of PC(20)-FEV(1) during BHR in young children and suggest that lung volume measurement by a plethysmograph may be feasible in early childhood. Larger studies should be performed to establish the clinical applicability of PC20-FEV1 determination in the preschool age.

Changes in Microbiota in Rumen Digesta and Feces Due to a Grain-Based Subacute Ruminal Acidosis (SARA) Challenge.

PubMed

Plaizier, Jan C; Li, Shucong; Danscher, Anne Mette; Derakshani, Hooman; Andersen, Pia H; Khafipour, Ehsan

2017-08-01

The effects of a grain-based subacute ruminal acidosis (SARA) challenge on bacteria in the rumen and feces of lactating dairy cows were determined. Six lactating, rumen-cannulated Danish Holstein cows were used in a cross-over study with two periods. Periods included two cows on a control diet and two cows on a SARA challenge. The control diet was a total mixed ration containing 45.5% dry matter (DM), 43.8% DM neutral detergent fiber, and 19.6% DM starch. The SARA challenge was conducted by gradually substituting the control diet with pellets containing 50% wheat and 50% barley over 3 days to reach a diet containing 55.6% DM, 31.3% DM neutral detergent fiber, and 31.8% DM starch, which was fed for four more days. Rumen fluid samples were collected at day 7 and 10 of experimental periods. Feces samples were collected on days 8 and 10 of these periods. Extracted DNA from the rumen and feces samples was analyzed to assess their bacterial communities using MiSeq Illumina sequencing of the V4 region of the 16S rRNA gene. The induction of SARA reduced the richness, diversity, and stability of bacterial communities and resulted in distinctly different microbiota in the rumen and feces. Bacteroidetes and Firmicutes were the most abundant phyla and, combined, they represented 76.9 and 94.4% of the bacterial community in the rumen fluid and the feces, respectively. Only the relative abundance of Firmicutes in the rumen was increased by the SARA challenge. In rumen fluid and feces, the abundances of nine out of the 90 and 25 out of the 89 taxa, respectively, were affected by the challenge. Hence, SARA challenge altered the composition of the bacterial community at the lower taxonomical level in the feces and therefore also likely in the hindgut, as well as in the rumen. However, only reductions in the bacterial richness and diversity in the rumen fluid and feces were in agreement with those of other studies and had a biological basis. Although the composition of the

Interleukin-10 neutralizing antibody for detection of intestinal luminal levels and as a dietary additive in Eimeria challenged broiler chicks.

PubMed

Arendt, Maria K; Sand, Jordan M; Marcone, Taylor M; Cook, Mark E

2016-02-01

Interleukin-10 (IL-10) mRNA levels are increased within intestinal mucosa after Eimeria infection. IL-10 apical receptor presence on enterocytes suggests IL-10 is secreted into the intestinal lumen. Increased IL-10 has been shown to be central to the pathogenesis of numerous intracellular pathogens; we hypothesize luminal secretion of IL-10 enables Eimeria spp. infection in chickens. This study examines intestine luminal IL-10 levels and performance in broilers challenged with Eimeria when fed an anti-IL-10 antibody. Chicks were fed a diet (1 to 21 d) with control or anti-IL-10 antibody (0.34 g egg yolk antibody powder/Kg diet) with a saline or 10× dose of Advent coccidiosis vaccine on d 3. One chick per pen was euthanized on days 2, 4, 7, 10, 13, 16, and 19 post-challenge, bled, and intestines were collected for luminal fluid IL-10 concentrations. Body weight and feed intake were measured on d 21, and oocyst shedding was assessed on d 7 post-challenge. A significant Eimeria × antibody interaction on d 21 body weight (P < 0.05) showed chicks fed control antibody, but not anti-IL-10, had significant reductions in body weight when challenged with Eimeria spp. Oocyst shedding was increased with Eimeria challenge, but dietary antibody had no effect. Plasma carotenoid levels were reduced in Eimeria challenged chicks 4, 7, 10, and 16 days post-challenge compared to unchallenged chicks. Lack of an Eimeria × antibody interaction showed anti-IL-10 was not protective against Eimeria-induced decreases in plasma carotenoids. Eimeria challenge increased intestine luminal IL-10 on days 4 and 7 post-challenge in the cecum and jejunum, respectively, compared to unchallenged. Dietary anti-IL-10 decreased luminal IL-10 in the ileum on day 2 post-challenge when compared to control antibody fed chicks. No interaction between Eimeria challenge and antibody was observed on intestine luminal contents of IL-10, suggesting anti-IL-10 was ineffective at preventing increased Eimeria

Approaches to Dispute Resolution in Additional Support Needs in Scotland

ERIC Educational Resources Information Center

Riddell, Sheila; Weedon, Elisabet

2009-01-01

The Education (Additional Support for Learning) (Scotland) Act 2004 aimed, among other things, to increase parents' rights in relation to the education of their children. In addition to the creation of the Additional Supports Needs Tribunals for Scotland, parents were given new rights to challenge local authority decisions through mediation and…

Thermographic In-Situ Process Monitoring of the Electron Beam Melting Technology used in Additive Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinwiddie, Ralph Barton; Dehoff, Ryan R; Lloyd, Peter D

2013-01-01

Oak Ridge National Laboratory (ORNL) has been utilizing the ARCAM electron beam melting technology to additively manufacture complex geometric structures directly from powder. Although the technology has demonstrated the ability to decrease costs, decrease manufacturing lead-time and fabricate complex structures that are impossible to fabricate through conventional processing techniques, certification of the component quality can be challenging. Because the process involves the continuous deposition of successive layers of material, each layer can be examined without destructively testing the component. However, in-situ process monitoring is difficult due to metallization on inside surfaces caused by evaporation and condensation of metal from themore » melt pool. This work describes a solution to one of the challenges to continuously imaging inside of the chamber during the EBM process. Here, the utilization of a continuously moving Mylar film canister is described. Results will be presented related to in-situ process monitoring and how this technique results in improved mechanical properties and reliability of the process.« less

Cooperative Projects - Challenges and Opportunities

NASA Astrophysics Data System (ADS)

Schubotz, Wiebke; Brücher, Tim; Vamborg, Freja

2017-04-01

Today's research in Germany is often organized in large projects and collaborations, so-called cooperative projects ("Verbundprojekte" in German). These projects are defined by a large number of members (more than 50) and participating institutes, e.g. institutes of research organizations such as the Max-Planck society and the Leibniz association, Helmholtz centres, and universities. For coordination purposes these projects usually have a general project manager or project coordinator close to the speaker of the project. Despite this overarching position, it is often challenging for the project manager to really overview the entire project as he is, for example, not involved in the individual institute's recruitment processes or research connections to other institutes via other projects. Additionally, there is neither a formal obligation for the principal investigators and project scientists to report changes within their sub-projects, nor any formal dependency between these sub-projects and the coordination office to ensure a contemporary update of changes and progress in their specific tasks of the project. Therefore, the idea of a coordinating position to oversee the entire cooperative project is sometimes difficult to reach. Furthermore, project managers usually have no formal connection to other project managers. This means that recurrent tasks, for which cooperation between project managers would be helpful, need to be reinvented for each project anew. Due to the lack of this more formalized cooperation between project managers, acquired expertise is often lost. We will illustrate the challenges of this kind of project management based on projects at the Max Planck Institute for Meteorology (Hamburg) and the Helmholtz Centre for Ocean Research (GEOMAR, Kiel), but also point out opportunities that arise within a large collaboration of partners. Moreover, we present an approach to coordinate management processes in order to overcome some of the aforementioned

Prevalence of Phosphorus-Based Additives in the Australian Food Supply: A Challenge for Dietary Education?

PubMed

McCutcheon, Jemma; Campbell, Katrina; Ferguson, Maree; Day, Sarah; Rossi, Megan

2015-09-01

Phosphorus-based food additives may pose a significant risk in chronic kidney disease given the link between hyperphosphatemia and cardiovascular disease. The objective of the study was to determine the prevalence of phosphorus-based food additives in best-selling processed grocery products and to establish how they were reported on food labels. A data set of 3000 best-selling grocery items in Australia across 15 food and beverage categories was obtained for the 12 months ending December 2013 produced by the Nielsen Company's Homescan database. The nutrition labels of the products were reviewed in store for phosphorus additives. The type of additive, total number of additives, and method of reporting (written out in words or as an E number) were recorded. Presence of phosphorus-based food additives, number of phosphorus-based food additives per product, and the reporting method of additives on product ingredient lists. Phosphorus-based additives were identified in 44% of food and beverages reviewed. Additives were particularly common in the categories of small goods (96%), bakery goods (93%), frozen meals (75%), prepared foods (70%), and biscuits (65%). A total of 19 different phosphorus additives were identified across the reviewed products. From the items containing phosphorus additives, there was a median (minimum-maximum) of 2 (1-7) additives per product. Additives by E number (81%) was the most common method of reporting. Phosphorus-based food additives are common in the Australian food supply. This suggests that prioritizing phosphorus additive education may be an important strategy in the dietary management of hyperphosphatemia. Further research to establish a database of food items containing phosphorus-based additives is warranted. Copyright © 2015 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Pre- and post-experimental manipulation assessments confirm the increase in number of birds due to the addition of nest boxes

PubMed Central

Cuatianquiz Lima, Cecilia

2016-01-01

Secondary cavity nesting (SCN) birds breed in holes that they do not excavate themselves. This is possible where there are large trees whose size and age permit the digging of holes by primary excavators and only rarely happens in forest plantations, where we expected a deficit of both breeding holes and SCN species. We assessed whether the availability of tree cavities influenced the number of SCNs in two temperate forest types, and evaluated the change in number of SCNs after adding nest boxes. First, we counted all cavities within each of our 25-m radius sampling points in mature and young forest plots during 2009. We then added nest boxes at standardised locations during 2010 and 2011 and conducted fortnightly bird counts (January–October 2009–2011). In 2011 we added two extra plots of each forest type, where we also conducted bird counts. Prior to adding nest boxes, counts revealed more SCNs in mature than in young forest. Following the addition of nest boxes, the number of SCNs increased significantly in the points with nest boxes in both types of forest. Counts in 2011 confirmed the increase in number of birds due to the addition of nest boxes. Given the likely benefits associated with a richer bird community we propose that, as is routinely done in some countries, forest management programs preserve old tree stumps and add nest boxes to forest plantations in order to increase bird numbers and bird community diversity. PMID:26998410

Pre- and post-experimental manipulation assessments confirm the increase in number of birds due to the addition of nest boxes.

PubMed

Cuatianquiz Lima, Cecilia; Macías Garcia, Constantino

2016-01-01

Secondary cavity nesting (SCN) birds breed in holes that they do not excavate themselves. This is possible where there are large trees whose size and age permit the digging of holes by primary excavators and only rarely happens in forest plantations, where we expected a deficit of both breeding holes and SCN species. We assessed whether the availability of tree cavities influenced the number of SCNs in two temperate forest types, and evaluated the change in number of SCNs after adding nest boxes. First, we counted all cavities within each of our 25-m radius sampling points in mature and young forest plots during 2009. We then added nest boxes at standardised locations during 2010 and 2011 and conducted fortnightly bird counts (January-October 2009-2011). In 2011 we added two extra plots of each forest type, where we also conducted bird counts. Prior to adding nest boxes, counts revealed more SCNs in mature than in young forest. Following the addition of nest boxes, the number of SCNs increased significantly in the points with nest boxes in both types of forest. Counts in 2011 confirmed the increase in number of birds due to the addition of nest boxes. Given the likely benefits associated with a richer bird community we propose that, as is routinely done in some countries, forest management programs preserve old tree stumps and add nest boxes to forest plantations in order to increase bird numbers and bird community diversity.

Additive manufacturing of glass for optical applications

NASA Astrophysics Data System (ADS)

Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

2016-04-01

Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

Development of an ear cap in chronic suppurative otitis media using additive manufacturing and TRIZ.

PubMed

Mawale, Mahesh B; Kuthe, Abhaykumar; Mawale, Anupama M; Dahake, Sandeep W

2018-06-01

The prevalence rate of chronic suppurative otitis media is high and its treatment continues to be a challenge for the otorhinolaryngologists. Due to middle ear infection, there may be pain, hearing loss and spontaneous rupture of the eardrum which results in perforation. Infections can cause a hole in the eardrum as a side effect of otitis media. The patients suffering from ear perforation or having a hole in eardrum require preventing entry of water in the ear. This article describes the development of ear cap using additive manufacturing and TRIZ (a collaborative tool) to prevent the entry of water in the ear during chronic otitis media.

SU-F-T-361: Dose Enhancement Due to Nanoparticle Addition in Skin Radiotherapy: A Monte Carlo Study Using Kilovoltage Photon Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, X; Chow, J

Purpose: This study investigated the dose enhancement due to addition of nanoparticles with different types and concentrations in skin radiotherapy using kilovoltage photon beams. Methods: An inhomogeneous water phantom (15×15×10 cm{sup 3}) having the skin target layer (0.5–5 mm), added with different concentrations (3–40 mg/ml) of nanoparticles (Au, Pt, I, Ag and Fe{sub 2}O{sub 3}), was irradiated by the 105 and 220 kVp photon beams produced by a Gulmay D3225 Orthovoltage unit. The circular cone of 5-cm diameter and source-to-surface distance of 20 cm were used. Doses in the skin target layer with and without adding the nanoparticles were calculatedmore » using Monte Carlo simulation (the EGSnrc code) through the macroscopic approach. Dose enhancement ratio (DER), defined as the ratio of dose at the target with nanoparticle addition to the dose without addition, was calculated for each type and concentration of nanoparticle in different target thickness. Results: For Au nanoparticle, DER dependence on target thickness for the 220 kVp photon beams was not significant. However, DER for Au nanoparticle was found decreasing with an increase of target thickness when the nanoparticle concentration was increased from 18 to 40 mg/ml using the 105 kVp photon beams. For nanoparticle concentration of 40 mg/ml, DER variation with target thickness was not significant for the 220 kVp photon beams, but DEF was found decreasing with the target thickness when lower energy of photon beam (105 kVp) was used. DEF was found increasing with an increase of nanoparticle concentration. The higher the DEF increasing rate, the higher the atomic number of the nanoparticle except I and Ag for the same target thickness. Conclusion: It is concluded that nanoparticle addition can result in dose enhancement in kilovoltage skin radiotherapy. Moreover, the DER is related to the photon beam energy, target thickness, atomic number and concentration of nanoparticles.« less

An Evaluation of ChalleNGe Graduates DOD Employability

DTIC Science & Technology

2018-01-22

initial reading and applied math TABE scores are more likely to complete ChalleNGe. In addition, those graduates who begin ChalleNGe with higher TABE...students arrive at ChalleNGe at low levels of reading comprehension, writing, and basic math ; they simply are not ready to acquire a second language...positive, long-term impacts for ChalleNGe graduates. Our previous work has shown that cadets with higher initial reading and applied math TABE scores are

The Additional Error of Inertial Sensors Induced by Hypersonic Flight Conditions

PubMed Central

Karachun, Volodimir; Mel’nick, Viktorij; Korobiichuk, Igor; Nowicki, Michał; Szewczyk, Roman; Kobzar, Svitlana

2016-01-01

The emergence of hypersonic technology pose a new challenge for inertial navigation sensors, widely used in aerospace industry. The main problems are: extremely high temperatures, vibration of the fuselage, penetrating acoustic radiation and shock N-waves. The nature of the additional errors of the gyroscopic inertial sensor with hydrostatic suspension components under operating conditions generated by forced precession of the movable part of the suspension due to diffraction phenomena in acoustic fields is explained. The cause of the disturbing moments in the form of the Coriolis inertia forces during the transition of the suspension surface into the category of impedance is revealed. The boundaries of occurrence of the features on the resonance wave match are described. The values of the “false” angular velocity as a result of the elastic-stress state of suspension in the acoustic fields are determined. PMID:26927122

The role of natural color additives in food allergy.

PubMed

Lucas, C D; Hallagan, J B; Taylor, S L

2001-01-01

A critical evaluation of the available information demonstrates that reactions to natural color additives are rare. Studies of turmeric and carotenoid pigments administered in mixtures with other food colorings failed to definitely identify reactions to either color additive. For carotenoids, the one case report of an adverse reaction was not conclusive. An anaphylactic reaction to saffron does suggest an IgE-mediated reaction, but the high use of saffron as compared with this single report of an adverse reaction suggests that sensitivity to saffron is extremely rare. Numerous reports of reactions to grapes or grape products have been reported in the literature, but no reports of sensitivities to grape skin extract or grape color extract were found. In rare cases, annatto dye may provoke a severe, adverse reaction in individuals with an uncommon hypersensitivity, and may aggravate the symptoms of patients suffering from recurrent urticaria. In its long history of use, there has been only one reported case of anaphylaxis resulting from the ingestion of annatto. Studies designed to investigate the role of annatto in recurrent urticaria sufferers were limited due to the absence of double-blind challenge and placebo controls. A number of cases of adverse reactions to carmine following ingestion have been reported in the literature. These adverse reactions suggest an IgE-mediated hypersensitivity. In many of the reported cases, the cause of sensitization to carmine was topical exposure from the use of carmine-containing cosmetics or occupational exposure to carmine and not from ingestion of carmine-containing foods and beverages. Following sensitization, affected individuals would be sensitive to carmine and the amounts present in foods and beverages could elicit allergic reactions. It is not known whether all individuals with carmine sensitivity induced through topical use are sensitive to the ingestion of carmine in foods. However, reactions to carmine solely because

The Leaking-Toilet Challenge

ERIC Educational Resources Information Center

Roman, Harry T.

2008-01-01

Leaking toilets can cost homeowners big dollars--often before it is even realized. Homeowners do not necessarily hear it leaking. It just does, and when the water bill comes due, it can be a most unpleasant surprise. This article presents a classroom challenge to try to develop leak-detection ideas that would be inexpensive and easily added to…

Efficacy of a novel prebiotic and a commercial probiotic in reducing mortality and production losses due to cold stress and Escherichia coli challenge of broiler chicks 1.

PubMed

Huff, G R; Huff, W E; Rath, N C; El-Gohary, F A; Zhou, Z Y; Shini, S

2015-05-01

Prebiotics consisting of resistant starch may alter intestinal ecology, thus modulating inflammation and increasing intestinal health through increased cecal production of short-chain fatty acids (SCFA). Probiotics may directly alter the intestinal microbiome, resulting in the same effects. We hypothesize that adding prebiotics and probiotics to feed may protect the gut of young chicks under stress. Studies 1, 2, and 3 evaluated treatments in a cold stress (CS) and Escherichia coli (EC) oral challenge to 430 day-old broiler chicks for 3 wk. In study 1, prebiotics were administered as 15% of the diet during the first week only and consisted of the following: Hi-Maize resistant starch (HM), potato starch (PS), or raw potato (RP). In studies 2 and 3, the PS treatment was identical to study 1, and an additional probiotic treatment (PRO) was administered in feed and water. In study 1, PS protected BW during the first week and decreased the mortality of CS/EC-challenged birds during the first week and wk 3, while RP decreased the mortality of warm-brooded birds challenged with EC during the first week. In study 2, PS decreased and PRO increased the main effect mean (MEM) of the first week BW. PS and PRO numerically decreased the feed conversion ratio (FCR) by 23 and 29 points, respectively, in CS/EC-challenged birds with no effects on mortality. In study 3, PS decreased and PRO increased the first week and wk 3 MEM BW. PS numerically increased FCR by 16 points, while PRO decreased FCR by 2 points. Both PS and PRO tended to increase overall mortality, and PRO significantly increased mortality in the CS/EC challenge. These results suggest that the effects of PS may be too variable in this challenge model for further study; however, the PRO treatment improved production values and may have potential as an alternative to antibiotics during the first weeks after hatch. © 2015 Poultry Science Association Inc.

Anomalous yield reduction in direct-drive DT implosions due to 3He addition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herrmann, Hans W; Langenbrunner, James R; Mack, Joseph M

2008-01-01

Glass capsules were imploded in direct drive on the OMEGA laser [T. R. Boehly et aI., Opt. Commun. 133, 495, 1997] to look for anomalous degradation in deuterium/tritium (DT) yield (i.e., beyond what is predicted) and changes in reaction history with {sup 3}He addition. Such anomalies have previously been reported for D/{sup 3}He plasmas, but had not yet been investigated for DT/{sup 3}He. Anomalies such as these provide fertile ground for furthering our physics understanding of ICF implosions and capsule performance. A relatively short laser pulse (600 ps) was used to provide some degree of temporal separation between shock andmore » compression yield components for analysis. Anomalous degradation in the compression component of yield was observed, consistent with the 'factor of two' degradation previously reported by MIT at a 50% {sup 3}He atom fraction in D{sub 2} using plastic capsules [Rygg et aI., Phys. Plasmas 13, 052702 (2006)]. However, clean calculations (i.e., no fuel-shell mixing) predict the shock component of yield quite well, contrary to the result reported by MIT, but consistent with LANL results in D{sub 2}/{sup 3}He [Wilson, et aI., lml Phys: Conf Series 112, 022015 (2008)]. X-ray imaging suggests less-than-predicted compression ofcapsules containing {sup 3}He. Leading candidate explanations are poorly understood Equation-of-State (EOS) for gas mixtures, and unanticipated particle pressure variation with increasing {sup 3}He addition.« less

Challenges in Additive Manufacturing of Space Parts: Powder Feedstock Cross-Contamination and Its Impact on End Products

PubMed Central

Brandão, Ana D.; Gerard, Romain; Gumpinger, Johannes; Beretta, Stefano; Makaya, Advenit; Pambaguian, Laurent; Ghidini, Tommaso

2017-01-01

This work studies the tensile properties of Ti-6Al-4V samples produced by laser powder bed based Additive Manufacturing (AM), for different build orientations. The results showed high scattering of the yield and tensile strength and low fracture elongation. The subsequent fractographic investigation revealed the presence of tungsten particles on the fracture surface. Hence, its detection and impact on tensile properties of AM Ti-6Al-4V were investigated. X-ray Computed Tomography (X-ray CT) scanning indicated that these inclusions were evenly distributed throughout the samples, however the inclusions area was shown to be larger in the load-bearing plane for the vertical specimens. A microstructural study proved that the mostly spherical tungsten particles were embedded in the fully martensitic Ti-6Al-4V AM material. The particle size distribution, the flowability and the morphology of the powder feedstock were investigated and appeared to be in line with observations from other studies. X-ray CT scanning of the powder however made the high density particles visible, where various techniques, commonly used in the certification of powder feedstock, failed to detect the contaminant. As the detection of cross contamination in the powder feedstock proves to be challenging, the use of only one type of powder per AM equipment is recommended for critical applications such as Space parts. PMID:28772882

Challenges in Additive Manufacturing of Space Parts: Powder Feedstock Cross-Contamination and Its Impact on End Products.

PubMed

Brandão, Ana D; Gerard, Romain; Gumpinger, Johannes; Beretta, Stefano; Makaya, Advenit; Pambaguian, Laurent; Ghidini, Tommaso

2017-05-12

This work studies the tensile properties of Ti-6Al-4V samples produced by laser powder bed based Additive Manufacturing (AM), for different build orientations. The results showed high scattering of the yield and tensile strength and low fracture elongation. The subsequent fractographic investigation revealed the presence of tungsten particles on the fracture surface. Hence, its detection and impact on tensile properties of AM Ti-6Al-4V were investigated. X-ray Computed Tomography (X-ray CT) scanning indicated that these inclusions were evenly distributed throughout the samples, however the inclusions area was shown to be larger in the load-bearing plane for the vertical specimens. A microstructural study proved that the mostly spherical tungsten particles were embedded in the fully martensitic Ti-6Al-4V AM material. The particle size distribution, the flowability and the morphology of the powder feedstock were investigated and appeared to be in line with observations from other studies. X-ray CT scanning of the powder however made the high density particles visible, where various techniques, commonly used in the certification of powder feedstock, failed to detect the contaminant. As the detection of cross contamination in the powder feedstock proves to be challenging, the use of only one type of powder per AM equipment is recommended for critical applications such as Space parts.

Effects of various additives on sintering of aluminum nitride

NASA Technical Reports Server (NTRS)

Komeya, K.; Inoue, H.; Tsuge, A.

1982-01-01

Effects of thirty additives on sintering A/N were investigated. The addition of alkali earth oxides and rare earth oxides gave fully densified aluminum nitride. This is due to the formation of nitrogen-containing aluminate liquid in the system aluminum nitride-alkali earth oxides or rare earth oxides. Microstructural studies of the sintered specimens with the above two types of additives suggested that the densification was due to the liquid phase sintering. Additions of silicon compounds resulted in poor densification by the formation of highly refractory compounds such as A/N polytypes.

Challenges associated with the implementation of the nursing process: A systematic review.

PubMed

Zamanzadeh, Vahid; Valizadeh, Leila; Tabrizi, Faranak Jabbarzadeh; Behshid, Mojghan; Lotfi, Mojghan

2015-01-01

Nursing process is a scientific approach in the provision of qualified nursing cares. However, in practice, the implementation of this process is faced with numerous challenges. With the knowledge of the challenges associated with the implementation of the nursing process, the nursing processes can be developed appropriately. Due to the lack of comprehensive information on this subject, the current study was carried out to assess the key challenges associated with the implementation of the nursing process. To achieve and review related studies on this field, databases of Iran medix, SID, Magiran, PUBMED, Google scholar, and Proquest were assessed using the main keywords of nursing process and nursing process systematic review. The articles were retrieved in three steps including searching by keywords, review of the proceedings based on inclusion criteria, and final retrieval and assessment of available full texts. Systematic assessment of the articles showed different challenges in implementation of the nursing process. Intangible understanding of the concept of nursing process, different views of the process, lack of knowledge and awareness among nurses related to the execution of process, supports of managing systems, and problems related to recording the nursing process were the main challenges that were extracted from review of literature. On systematically reviewing the literature, intangible understanding of the concept of nursing process has been identified as the main challenge in nursing process. To achieve the best strategy to minimize the challenge, in addition to preparing facilitators for implementation of nursing process, intangible understanding of the concept of nursing process, different views of the process, and forming teams of experts in nursing education are recommended for internalizing the nursing process among nurses.

Terminal addition in a cellular world.

PubMed

Torday, J S; Miller, William B

2018-07-01

Recent advances in our understanding of evolutionary development permit a reframed appraisal of Terminal Addition as a continuous historical process of cellular-environmental complementarity. Within this frame of reference, evolutionary terminal additions can be identified as environmental induction of episodic adjustments to cell-cell signaling patterns that yield the cellular-molecular pathways that lead to differing developmental forms. Phenotypes derive, thereby, through cellular mutualistic/competitive niche constructions in reciprocating responsiveness to environmental stresses and epigenetic impacts. In such terms, Terminal Addition flows according to a logic of cellular needs confronting environmental challenges over space-time. A reconciliation of evolutionary development and Terminal Addition can be achieved through a combined focus on cell-cell signaling, molecular phylogenies and a broader understanding of epigenetic phenomena among eukaryotic organisms. When understood in this manner, Terminal Addition has an important role in evolutionary development, and chronic disease might be considered as a form of 'reverse evolution' of the self-same processes. Copyright © 2017. Published by Elsevier Ltd.

[Preclinical treatment of severe burn trauma due to an electric arc on an overhead railway cable].

PubMed

Spelten, O; Wetsch, W A; Hinkelbein, J

2013-09-01

Severe burns due to electrical accidents occur rarely in Germany but represent a challenge for emergency physicians and their team. Apart from extensive burns cardiac arrhythmia, neurological damage caused by electric current and osseous injury corresponding to the trauma mechanism are also common. It is important to perform a survey of the pattern of injuries and treat acute life-threatening conditions immediately in the field. Furthermore, specific conditions related to burns must be considered, e.g. fluid resuscitation, thermal management and analgesia. In addition, a correct strategy for further medical care in an appropriate hospital is essential. Exemplified by this case guidelines for the treatment of severe burns and typical pitfalls are presented.

Establishing and sustaining a biorepository network in Israel: challenges and progress.

PubMed

Cohen, Yehudit; Almog, Ronit; Onn, Amir; Itzhaki-Alfia, Ayelet; Meir, Karen

2013-12-01

Over the past 5 years, using European and North American biobanks as models, the grass-roots establishment of independently operating biobanks has occurred virtually simultaneously in large Israeli teaching hospitals. The process of establishing a national biorepository network in Israel has progressed slowly, sustained mainly by a few proponents working together on a personal level. Slow progress has been due to limited funding and the lack of a legal framework specific to biobanking activities. Recently, due to increasing pressure from the scientific community, the government has earmarked funds for a national biorepository network, and the structure is now being established. In forming a network, Israel's biobanks face certain difficulties, particularly lack of support. Additional challenges include harmonization of standard operating procedures, database centralization, and use of a common informed consent form. In this article, we highlight some of the issues faced by Israel's biobank managers in establishing and sustaining a functional biobank network, information that could provide guidance for other small countries with limited resources.

Forthcoming therapeutic perspectives for infections due to multidrug-resistant Gram-positive pathogens.

PubMed

Cornaglia, G; Rossolini, G M

2009-03-01

Multidrug resistance in Gram-positive pathogens emerged as a major therapeutic challenge over two decades ago. The worldwide spread of methicillin-resistant Staphylococcus aureus (MRSA), glycopeptide-resistant enterococci and other resistant Gram-positive pathogens had a major impact on antibiotic policies, and prompted the discovery and development of new antibiotics to combat difficult-to-treat infections caused by such pathogens. Several new antibiotics active against multidrug-resistant Gram-positive pathogens have recently been introduced into clinical practice, and the antibiotic pipeline contains additional anti-Gram-positive drugs at an advanced stage of development, including new glycopeptides (dalbavancin, oritavancin, and telavancin), new anti-MRSA beta-lactams (ceftobiprole), and new diaminopyrimidines (iclaprim). This article provides a brief overview of these upcoming agents, partially based on the material presented at the ESCMID Conference entitled 'Fighting infections due to multidrug-resistant Gram-positives' (Venice, Italy, 29-31 May 2008) and on the most recent literature.

Mucosal immunization: a review of strategies and challenges.

PubMed

Patel, Hinal; Yewale, Chetan; Rathi, Mohan N; Misra, Ambikanandan

2014-01-01

The vast majority of pathogens enter the human body via the mucosal surfaces of the gastrointestinal, respiratory, and urogenital tracts, where they initiate mucosal infections that lead to systemic infections. Despite strong evidence that a good mucosal immune response can effectively prevent systemic infection too, only a few mucosal vaccines are available due to their low efficiency. Most current immunization techniques involve systemic injection, but they are ineffective to induce immunization at a mucosal site. It is a great challenge to target a mucosal compartment that can induce protective immunity at mucosal sites as well as systemic sites. A better understanding of cellular and molecular factors involved in the regulation of mucosal immunity will aid in the design of safer mucosal vaccines that elicit the desired protective immunity against infectious diseases such as HIV. The development of mucosal vaccines, whether for prevention of infectious diseases or for immunotherapy, requires antigen delivery and adjuvant systems that can effectively present vaccine or immunotherapeutic antigens to the mucosal sites. In this review, we examine the mechanism of mucosal protection, induction of mucosal immune response, types of vaccines, current status of marketed vaccines, and novel strategies for protection against infections and for treatment of inflammatory disorders. Additionally, we offer perspectives on future challenges and research directions.

Perampanel and Challenging Behaviour in Intellectual Disability and Epilepsy: A Management Dilemma

PubMed Central

Choudry, Ansar

2014-01-01

We describe a case of a patient with a diagnosis of moderate learning disability with challenging behaviour and treatment refractory epilepsy. Antiepileptics can increase challenging behaviour; however, antipsychotics can provoke seizures. This results in a difficult balance for patient care. Due to worsening seizures, the patient was prescribed perampanel. This increased her aggression and agitation resulting in admission. We trialled four antipsychotic drugs to reduce her challenging behaviour, two of which worsened her seizures. It was necessary to continue antiepileptic medication to maintain adequate seizure control. However, the resulting uncontrolled challenging behaviour persisted, meaning she was unable to return to her family home on discharge. This case emphasises the difficult scenario clinician's encounter when balancing the use of antipsychotics and antiepileptics. The case demonstrates the significant functional loss due to challenging behaviour, balanced against controlling life threatening seizures. PMID:25580340

A reflective teaching challenge to motivate educational innovation.

PubMed

Edwards, Roger A; Kirwin, Jennifer; Gonyeau, Michael; Matthews, S James; Lancaster, Jason; DiVall, Margarita

2014-06-17

To describe a teaching challenge intended to increase faculty use of evidence-based and student-centered instructional strategies in the demanding school of pharmacy context with technology-savvy students. A teaching challenge was created that required faculty members to incorporate a "new-to-you" innovative teaching method in a class, course, or experiential activity. The method was linked to at least 1 of 7 evidence-based principles for effective teaching. Faculty members were exposed to colleagues' teaching strategies via brief voluntary presentations at department meetings. A post-challenge survey provided assessment data about the challenge. Responses to a baseline survey provided additional information about what faculty members were already doing (52% response rate). Eighty-one percent of faculty respondents completed the challenge. A wide array of new strategies (13 categories such as flipped classrooms and social media) was implemented and 75% included the use of technology. Nearly all respondents (96%) thought that participation in the challenge was worth the effort and planned to participate again the following year. All faculty members intended to continue using their new strategy and 56% planned additional modifications with future implementations. The challenge demonstrated how multiple goals of curricular improvement, faculty development, and student-centered instruction could be achieved together. The teaching challenge motivated most of the faculty members to try something new to them. Links between evidence-based principles and day-to-day activities were strengthened. The new-to-you design placed the challenge within reach of faculty members regardless of their background, subject, or experience.

40 CFR 141.719 - Additional filtration toolbox components.

Code of Federal Regulations, 2013 CFR

2013-07-01

... establish a quality control release value (QCRV) for a non-destructive performance test that demonstrates... test; and Cp = the filtrate concentration measured during the challenge test. Equivalent units must be... or the applicability of the non-destructive performance test and associated QCRV, additional...

40 CFR 141.719 - Additional filtration toolbox components.

Code of Federal Regulations, 2014 CFR

2014-07-01

... establish a quality control release value (QCRV) for a non-destructive performance test that demonstrates... test; and Cp = the filtrate concentration measured during the challenge test. Equivalent units must be... or the applicability of the non-destructive performance test and associated QCRV, additional...

40 CFR 141.719 - Additional filtration toolbox components.

Code of Federal Regulations, 2012 CFR

2012-07-01

... establish a quality control release value (QCRV) for a non-destructive performance test that demonstrates... test; and Cp = the filtrate concentration measured during the challenge test. Equivalent units must be... or the applicability of the non-destructive performance test and associated QCRV, additional...

Challenges Regarding IP Core Functional Reliability

NASA Technical Reports Server (NTRS)

Berg, Melanie D.; LaBel, Kenneth A.

2017-01-01

For many years, intellectual property (IP) cores have been incorporated into field programmable gate array (FPGA) and application specific integrated circuit (ASIC) design flows. However, the usage of large complex IP cores were limited within products that required a high level of reliability. This is no longer the case. IP core insertion has become mainstream including their use in highly reliable products. Due to limited visibility and control, challenges exist when using IP cores and subsequently compromise product reliability. We discuss challenges and suggest potential solutions to critical application IP insertion.

Mechanism of wiggling enhancement due to HBr gas addition during amorphous carbon etching

NASA Astrophysics Data System (ADS)

Kofuji, Naoyuki; Ishimura, Hiroaki; Kobayashi, Hitoshi; Une, Satoshi

2015-06-01

The effect of gas chemistry during etching of an amorphous carbon layer (ACL) on wiggling has been investigated, focusing especially on the changes in residual stress. Although the HBr gas addition reduces critical dimension loss, it enhances the surface stress and therefore increases wiggling. Attenuated total reflectance Fourier transform infrared spectroscopy revealed that the increase in surface stress was caused by hydrogenation of the ACL surface with hydrogen radicals. Three-dimensional (3D) nonlinear finite element method analysis confirmed that the increase in surface stress is large enough to cause the wiggling. These results also suggest that etching with hydrogen compound gases using an ACL mask has high potential to cause the wiggling.

Anomalous yield reduction in direct-drive deuterium/tritium implosions due to 3He addition

NASA Astrophysics Data System (ADS)

Herrmann, H. W.; Langenbrunner, J. R.; Mack, J. M.; Cooley, J. H.; Wilson, D. C.; Evans, S. C.; Sedillo, T. J.; Kyrala, G. A.; Caldwell, S. E.; Young, C. S.; Nobile, A.; Wermer, J.; Paglieri, S.; McEvoy, A. M.; Kim, Y.; Batha, S. H.; Horsfield, C. J.; Drew, D.; Garbett, W.; Rubery, M.; Glebov, V. Yu.; Roberts, S.; Frenje, J. A.

2009-05-01

Glass capsules were imploded in direct drive on the OMEGA laser [Boehly et al., Opt. Commun. 133, 495 (1997)] to look for anomalous degradation in deuterium/tritium (DT) yield and changes in reaction history with H3e addition. Such anomalies have previously been reported for D/H3e plasmas but had not yet been investigated for DT/H3e. Anomalies such as these provide fertile ground for furthering our physics understanding of inertial confinement fusion implosions and capsule performance. Anomalous degradation in the compression component of yield was observed, consistent with the "factor of 2" degradation previously reported by Massachusetts Institute of Technology (MIT) at a 50% H3e atom fraction in D2 using plastic capsules [Rygg, Phys. Plasmas 13, 052702 (2006)]. However, clean calculations (i.e., no fuel-shell mixing) predict the shock component of yield quite well, contrary to the result reported by MIT but consistent with Los Alamos National Laboratory results in D2/H3e [Wilson et al., J. Phys.: Conf. Ser. 112, 022015 (2008)]. X-ray imaging suggests less-than-predicted compression of capsules containing H3e. Leading candidate explanations are poorly understood equation of state for gas mixtures and unanticipated particle pressure variation with increasing H3e addition.

Challenges associated with the implementation of the nursing process: A systematic review

PubMed Central

Zamanzadeh, Vahid; Valizadeh, Leila; Tabrizi, Faranak Jabbarzadeh; Behshid, Mojghan; Lotfi, Mojghan

2015-01-01

Background: Nursing process is a scientific approach in the provision of qualified nursing cares. However, in practice, the implementation of this process is faced with numerous challenges. With the knowledge of the challenges associated with the implementation of the nursing process, the nursing processes can be developed appropriately. Due to the lack of comprehensive information on this subject, the current study was carried out to assess the key challenges associated with the implementation of the nursing process. Materials and Methods: To achieve and review related studies on this field, databases of Iran medix, SID, Magiran, PUBMED, Google scholar, and Proquest were assessed using the main keywords of nursing process and nursing process systematic review. The articles were retrieved in three steps including searching by keywords, review of the proceedings based on inclusion criteria, and final retrieval and assessment of available full texts. Results: Systematic assessment of the articles showed different challenges in implementation of the nursing process. Intangible understanding of the concept of nursing process, different views of the process, lack of knowledge and awareness among nurses related to the execution of process, supports of managing systems, and problems related to recording the nursing process were the main challenges that were extracted from review of literature. Conclusions: On systematically reviewing the literature, intangible understanding of the concept of nursing process has been identified as the main challenge in nursing process. To achieve the best strategy to minimize the challenge, in addition to preparing facilitators for implementation of nursing process, intangible understanding of the concept of nursing process, different views of the process, and forming teams of experts in nursing education are recommended for internalizing the nursing process among nurses. PMID:26257793

Challenges in Teaching Modern Manufacturing Technologies

ERIC Educational Resources Information Center

Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

2015-01-01

Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in…

Overview of Additive Manufacturing Initiatives at NASA Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Clinton, R. G., Jr.

2018-01-01

NASA's In Space Manufacturing Initiative (ISM) includes: The case for ISM - why; ISM path to exploration - results from the 3D Printing In Zero-G Technology Demonstration - ISM challenges; In space Robotic Manufacturing and Assembly (IRMA); Additive construction. Additively Manufacturing (AM) development for liquid rocket engine space flight hardware. MSFC standard and specification for additively manufactured space flight hardware. Summary.

Anaerobic digestion of food waste - Challenges and opportunities.

PubMed

Xu, Fuqing; Li, Yangyang; Ge, Xumeng; Yang, Liangcheng; Li, Yebo

2018-01-01

The disposal of large amounts of food waste has caused significant environmental pollution and financial costs globally. Compared with traditional disposal methods (i.e., landfilling, incineration, and composting), anaerobic digestion (AD) is a promising technology for food waste management, but has not yet been fully applied due to a few technical and social challenges. This paper summarizes the quantity, composition, and methane potential of various types of food waste. Recent research on different strategies to enhance AD of food waste, including co-digestion, addition of micronutrients, control of foaming, and process design, is discussed. It is envisaged that AD of food waste could be combined with an existing AD facility or be integrated with the production of value-added products to reduce costs and increase revenue. Further understanding of the fundamental biological and physicochemical processes in AD is required to improve the technology. Copyright © 2017 Elsevier Ltd. All rights reserved.

The work of the European Union Reference Laboratory for Food Additives (EURL) and its support for the authorisation process of feed additives in the European Union: a review

PubMed Central

von Holst, Christoph; Robouch, Piotr; Bellorini, Stefano; de la Huebra, María José González; Ezerskis, Zigmas

2016-01-01

ABSTRACT This paper describes the operation of the European Union Reference Laboratory for Feed Additives (EURL) and its role in the authorisation procedure of feed additives in the European Union. Feed additives are authorised according to Regulation (EC) No. 1831/2003, which introduced a completely revised authorisation procedure and also established the EURL. The regulations authorising feed additives contain conditions of use such as legal limits of the feed additives, which require the availability of a suitable method of analysis for official control purposes under real world conditions. It is the task of the EURL to evaluate the suitability of analytical methods as proposed by the industry for this purpose. Moreover, the paper shows that one of the major challenges is the huge variety of the methodology applied in feed additive analysis, thus requiring expertise in quite different analytical areas. In order to cope with this challenge, the EURL is supported by a network of national reference laboratories (NRLs) and only the merged knowledge of all NRLs allows for a scientifically sound assessment of the analytical methods. PMID:26540604

Economic challenges associated with tuberculosis diagnostic development.

PubMed

Hanrahan, Colleen F; Shah, Maunank

2014-08-01

Tuberculosis remains a global health crisis in part due to underdiagnosis. Technological innovations are needed to improve diagnostic test accuracy and reduce the reliance on expensive laboratory infrastructure. However, there are significant economic challenges impeding the development and implementation of new diagnostics. The aim of this piece is to examine the current state of TB diagnostics, outline the unmet needs for new tests, and detail the economic challenges associated with development of new tests from the perspective of developers, policy makers and implementers.

Challenges to the successful implementation of 3-D sound

NASA Astrophysics Data System (ADS)

Begault, Durand R.

1991-11-01

The major challenges for the successful implementation of 3-D audio systems involve minimizing reversals, intracranially heard sound, and localization error for listeners. Designers of 3-D audio systems are faced with additional challenges in data reduction and low-frequency response characteristics. The relationship of the head-related transfer function (HRTF) to these challenges is shown, along with some preliminary psychoacoustic results gathered at NASA-Ames.

Food additives.

PubMed

Berglund, F

1978-01-01

The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

Why employees with higher challenging appraisals style are more affectively engaged at work? The role of challenging stressors: a moderated mediation model.

PubMed

Lin, Shin-Huei; Wu, Chia-Huei; Chen, Mei-Yen; Chen, Lung Hung

2014-10-01

Challenging stressors have been positively linked to various work outcomes. However, the role of individual differences in stress appraisal in shaping the function of challenging stressors and work outcomes has been rarely discussed. Drawing on the individual differences perspective, the authors propose that employees higher in challenge appraisal are more likely to have challenging stressors and are more responsive to such stressors to have a higher positive affect at work. Results obtained from 117 employees supported the hypotheses. The results indicated that challenge appraisal is positively related to challenging stressors. In addition, challenging stressors has a positive association with positive affect at work when challenge appraisal is high but has a null association when challenge appraisal is low. The findings suggest that challenging stressors does not necessarily bring positive work outcomes as suggested in past studies and highlight the importance of considering dispositional tendency in stress appraisal when looking into the function of challenging stressors and work outcomes. © 2014 International Union of Psychological Science.

Challenges ahead for mass spectrometry and proteomics applications in epigenetics.

PubMed

Kessler, Benedikt M

2010-02-01

Inheritance of biological information to future generations depends on the replication of DNA and the Mendelian principle of distribution of genes. In addition, external and environmental factors can influence traits that can be propagated to offspring, but the molecular details of this are only beginning to be understood. The discoveries of DNA methylation and post-translational modifications on chromatin and histones provided entry points for regulating gene expression, an area now defined as epigenetics and epigenomics. Mass spectrometry turned out to be instrumental in uncovering molecular details involved in these processes. The central role of histone post-translational modifications in epigenetics related biological processes has revitalized mass spectrometry based investigations. In this special report, current approaches and future challenges that lay ahead due to the enormous complexity are discussed.

Geographical and temporal differences in electric vehicle range due to cabin conditioning energy consumption

NASA Astrophysics Data System (ADS)

Kambly, Kiran; Bradley, Thomas H.

2015-02-01

Electric vehicles (EVs) are vehicles that are propelled by electric motors powered by rechargeable battery. They are generally asserted to have GHG emissions, driveability and life cycle cost benefits over conventional vehicles. Despite this, EVs face significant challenges due to their limited on-board energy storage capacity. In addition to providing energy for traction, the energy storage device operates HVAC systems for cabin conditioning. This results in reduced driving range. The factors such as local ambient temperature, local solar radiation, local humidity, duration and thermal soak have been identified to affect the cabin conditions. In this paper, the development of a detailed system-level approach to HVAC energy consumption in EVs as a function of transient environmental parameters is described. The resulting vehicle thermal comfort model is used to address several questions such as 1) How does day to day environmental conditions affect EV range? 2) How does frequency of EV range change geographically? 3) How does trip start time affect EV range? 4) Under what conditions does cabin preconditioning assist in increasing the EV range? 5) What percentage increase in EV range can be expected due to cabin preconditioning at a given location?

Metagenomic Assembly: Overview, Challenges and Applications

PubMed Central

Ghurye, Jay S.; Cepeda-Espinoza, Victoria; Pop, Mihai

2016-01-01

Advances in sequencing technologies have led to the increased use of high throughput sequencing in characterizing the microbial communities associated with our bodies and our environment. Critical to the analysis of the resulting data are sequence assembly algorithms able to reconstruct genes and organisms from complex mixtures. Metagenomic assembly involves new computational challenges due to the specific characteristics of the metagenomic data. In this survey, we focus on major algorithmic approaches for genome and metagenome assembly, and discuss the new challenges and opportunities afforded by this new field. We also review several applications of metagenome assembly in addressing interesting biological problems. PMID:27698619

Challenges in predicting and simulating summer rainfall in the eastern China

NASA Astrophysics Data System (ADS)

Liang, Ping; Hu, Zeng-Zhen; Liu, Yunyun; Yuan, Xing; Li, Xiaofan; Jiang, Xingwen

2018-05-01

To demonstrate the challenge of summer rainfall prediction and simulation in the eastern China, in this work, we examine the skill of the state-of-the-art climate models, evaluate the impact of sea surface temperature (SST) on forecast skill and estimate the predictability by using perfect model approach. The challenge is further demonstrated by assessing the ability of various reanalyses in capturing the observed summer rainfall variability in the eastern China and by examining the biases in reanalyses and in a climate model. Summer rainfall forecasts (hindcasts) initiated in May from eight seasonal forecast systems have low forecast skill with linear correlation of - 0.3 to 0.5 with observations. The low forecast skill is consistent with the low perfect model score ( 0.1-0.3) of atmospheric model forced by observed SST, due to the fact that external forcing (SST) may play a secondary role in the summer rainfall variation in the eastern China. This is a common feature for the climate variation over the middle and high latitude lands, where the internal dynamical processes dominate the rainfall variation in the eastern China and lead to low predictability, and external forcing (such as SST) plays a secondary role and is associated with predictable fraction. Even the reanalysis rainfall has some remarkable disagreements with the observation. Statistically, more than 20% of the observed variance is not captured by the mean of six reanalyses. Among the reanalyses, JRA55 stands out as the most reliable one. In addition, the reanalyses and climate model have pronounced biases in simulating the mean rainfall. These defaults mean an additional challenge in predicting the summer rainfall variability in the eastern China that has low predictability in nature.

Neutron Characterization for Additive Manufacturing

NASA Technical Reports Server (NTRS)

Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

2013-01-01

Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

Immune challenges and visual signalling in tree frogs

NASA Astrophysics Data System (ADS)

Desprat, Julia L.; Lengagne, Thierry; Mondy, Nathalie

2017-04-01

In animals, mate-choice is often based on sexual signals that carry information and help the receiver make the best choice to improve the receiver's fitness. Orange visual sexual signals have been hypothesised to carry immune information because they are often due to carotenoid pigments which are also involved in immunity response. Although many studies have focused on the direct relationships between coloration and immunocompetence, few studies have simultaneously studied immunocompetent response and coloration variation after an immune challenge. We tested this hypothesis on starved and ad libitum-fed males of the European tree frog Hyla arborea. Our results show that male coloration is not a reliable indicator of its immune response capacity in this species. However, after an immune challenge induced by a PHA ( Phaseolus vulgaris phytohaemagglutinin) injection, starved males presented a significant coloration loss and this alteration was related to the immune response intensity. Taken together, these results suggest that the brighter (lighter) coloration may be used as a cue by female to exclude males with a recent immune challenge, due to diseases or parasites for example.

Economic challenges associated with tuberculosis diagnostic development

PubMed Central

Hanrahan, Colleen F.; Shah, Maunank

2015-01-01

Tuberculosis remains a global health crisis in part due to underdiagnosis. Technological innovations are needed to improve diagnostic test accuracy and reduce the reliance on expensive laboratory infrastructure. However, there are significant economic challenges impeding the development and implementation of new diagnostics. The aim of this piece is to examine the current state of TB diagnostics, outline the unmet needs for new tests, and detail the economic challenges associated with development of new tests from the perspective of developers, policy makers and implementers. PMID:24766367

Additive Manufacturing (AM) in Expeditionary Operations: Current Needs, Technical Challenges, and Opportunities

DTIC Science & Technology

2016-06-01

site customization of existing models. The author performed an empirical study centered around a survey of United States Marine Corps (USMC) and United...recommends that more studies be performed to determine the best way forward for AM within the USMC and USN. 14. SUBJECT TERMS 3D printing, additive...customization of existing models. The author performed an em- pirical study centered around a survey of United States Marine Corps (USMC) and United

Exaggerated Hepatic Injury Due to Acetaminophen Challenge in Mice Lacking C-C Chemokine Receptor 2

PubMed Central

Hogaboam, Cory M.; Bone-Larson, Cynthia L.; Steinhauser, Matthew L.; Matsukawa, Akihiro; Gosling, Jennifa; Boring, Landin; Charo, Israel F.; Simpson, Kenneth J.; Lukacs, Nicholas W.; Kunkel, Steven L.

2000-01-01

Monocyte chemoattractant protein-1 is one of the major C-C chemokines that has been implicated in liver injury. The C-C chemokine receptor, CCR2, has been identified as the primary receptor that mediates monocyte chemoattractant protein-1 (MCP-1) responses in the mouse. Accordingly, the present study addressed the role of CCR2 in mice acutely challenged with acetaminophen (APAP). Mice genetically deficient in CCR2 (CCR2−/−) and their wild-type counterparts (CCR2+/+) were fasted for 10 hours before receiving an intraperitoneal injection of APAP (300 mg/kg). Liver and serum samples were removed from both groups of mice before and at 24 and 48 hours post APAP. Significantly elevated levels of MCP-1 were detected in liver samples from CCR2+/+ and CCR2−/− mice at 24 hours post-APAP. Although CCR2+/+ mice exhibited no liver injury at any time after receiving APAP, CCR2−/− mice exhibited marked evidence of necrotic and TUNEL-positive cells in the liver, particularly at 24 hours post-APAP. Enzyme-linked immunosorbent assay analysis of liver homogenates from both groups of mice at the 24 hours time point revealed that liver tissue from CCR2−/− mice contained significantly greater amounts of immunoreactive IFN-γ and TNF-α. The in vivo immunoneutralization of IFN-γ or TNF-α significantly attenuated APAP-induced liver injury in CCR2−/− mice and increased hepatic IL-13 levels. Taken together, these findings demonstrate that CCR2 expression in the liver provides a hepatoprotective effect through its regulation of cytokine generation during APAP challenge. PMID:10751350

Toxicological challenges to microbial bioethanol production and strategies for improved tolerance

DOE PAGES

Akinsho, Hannah; Rydzak, Thomas; Borole, Abhijeet P.; ...

2015-09-30

Bioethanol production output has increased steadily over the last two decades and is now beginning to become competitive with traditional liquid transportation fuels due to advances in engineering, the identification of new production host organisms, and the development of novel biodesign strategies. A significant portion of these efforts has been dedicated to mitigating the toxicological challenges encountered across the bioethanol production process. From the release of potentially cytotoxic or inhibitory compounds from input feedstocks, through the metabolic co-synthesis of ethanol and potentially detrimental byproducts, and to the potential cytotoxicity of ethanol itself, each stage of bioethanol production requires the applicationmore » of genetic or engineering controls that ensure the host organisms remain healthy and productive to meet the necessary economies required for large scale production. In addition, as production levels continue to increase, there is an escalating focus on the detoxification of the resulting waste streams to minimize their environmental impact. Thus, this review will present the major toxicological challenges encountered throughout each stage of the bioethanol production process and the commonly employed strategies for reducing or eliminating potential toxic effects.« less

2018 Human Exploration Rover Challenge

NASA Image and Video Library

2018-04-13

High school and university students competed in the 2018 Human Exploration Rover Challenge event at the U.S. Space and Rocket Center in Huntsville, Alabama. Students came from across the U.S. as well as several foreign countries such as Brazil, Germany, India, and Mexico. This event, which is normally a 2 day event, was shortened to 1 day in 2018 due to adverse weather conditions.

Presidential Green Chemistry Challenge: 2002 Designing Greener Chemicals Award

EPA Pesticide Factsheets

Presidential Green Chemistry Challenge 2002 award winner, Chemical Specialties, developed an alkaline copper quaternary wood preservative to replace chromated copper arsenate preservative phased out due to risk to children.

Characterizing challenged Minnesota ballots

NASA Astrophysics Data System (ADS)

Nagy, George; Lopresti, Daniel; Barney Smith, Elisa H.; Wu, Ziyan

2011-01-01

Photocopies of the ballots challenged in the 2008 Minnesota elections, which constitute a public record, were scanned on a high-speed scanner and made available on a public radio website. The PDF files were downloaded, converted to TIF images, and posted on the PERFECT website. Based on a review of relevant image-processing aspects of paper-based election machinery and on additional statistics and observations on the posted sample data, robust tools were developed for determining the underlying grid of the targets on these ballots regardless of skew, clipping, and other degradations caused by high-speed copying and digitization. The accuracy and robustness of a method based on both index-marks and oval targets are demonstrated on 13,435 challenged ballot page images.

Emerging Water Contaminants: Technical, Legal and Policy Challenges

NASA Astrophysics Data System (ADS)

Deeb, R. A.; Kresic, N.; Laugier, M. C.; Kavanaugh, M. C.

2002-12-01

Approximately 120 new chemicals are created each year due to ever-improving industry and technology markets. Releases of new contaminants into the environment can occur during production, use and disposal of these chemicals thereby leading to potential contamination of water supply sources. Very few emerging contaminants are regulated. In addition, knowledge gaps regarding emerging contaminants include lack health effects, occurrence (either because these compounds are not measured or because concentrations are below detection limits of readily available analytical techniques) and fate and transport in the environment especially with regards to mobility and persistence. The sources of these compounds are numerous. One source is treated wastewater, which is re-injected into groundwater aquifers for indirect potable reuse purposes. Emerging compounds of concern can be classified in various classes. This presentation will focus on contaminants, which have emerged in the last 10 years including pharmaceuticals (antibiotics/drugs), personal care products (polycyclic musks), pesticides/herbicides, industrial solvents (1,4-dioxane), gasoline additives (MTBE), disinfection byproducts such as NDMA (N-nitrosodimethylamine), and inorganic compounds such as perchlorate and arsenic. This presentation will present technical, legal and legislative challenges posed by the presence of these contaminants in water. Background information including chemical's history of use, sources in the environments, nationwide occurrence, physical and chemical properties, behavior in the environment and technologies for removal from soil and water will be presented. In addition, case studies on MTBE, pharmaceuticals and personal care products, 1,4-dioxane, arsenic and NDMA will be discussed.

The Effects of Authentic Vision Statement on Challenges Experienced by First Year Superintendents

ERIC Educational Resources Information Center

Erdos, Monica

2011-01-01

A new superintendent in a new school district (NSND) can be a challenging position. The literature review asserts that many challenges faced by NSNDs are due to the absence of a shared vision. Challenges can be listed as work stoppage, personnel, financial, fighting ghosts, homecoming procession and many other aspects of running a district.…

Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges

PubMed Central

Singhal, Ayush; Leaman, Robert; Catlett, Natalie; Lemberger, Thomas; McEntyre, Johanna; Polson, Shawn; Xenarios, Ioannis; Arighi, Cecilia; Lu, Zhiyong

2016-01-01

Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system ‘accuracy’ remains a challenge and identify several additional common difficulties and potential research directions including (i) the ‘scalability’ issue due to the increasing need of mining information from millions of full-text articles, (ii) the ‘interoperability’ issue of integrating various text-mining systems into existing curation workflows and (iii) the ‘reusability’ issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. Finally, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators. PMID:28025348

Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges

DOE PAGES

Singhal, Ayush; Leaman, Robert; Catlett, Natalie; ...

2016-12-26

Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system ‘accuracy’ remains a challenge and identify several additional common difficulties and potential research directions including (i) the ‘scalability’ issue due to themore » increasing need of mining information from millions of full-text articles, (ii) the ‘interoperability’ issue of integrating various text-mining systems into existing curation workflows and (iii) the ‘reusability’ issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. In conclusion, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators.« less

Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singhal, Ayush; Leaman, Robert; Catlett, Natalie

Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system ‘accuracy’ remains a challenge and identify several additional common difficulties and potential research directions including (i) the ‘scalability’ issue due to themore » increasing need of mining information from millions of full-text articles, (ii) the ‘interoperability’ issue of integrating various text-mining systems into existing curation workflows and (iii) the ‘reusability’ issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. In conclusion, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators.« less

Early access programs: Benefits, challenges, and key considerations for successful implementation

PubMed Central

Patil, Sanjaykumar

2016-01-01

Early access programs, (EAPs) are adopted by an increasing number of pharma companies due to several benefits offered by these programs. EAPs offer ethical, compliant, and controlled mechanisms of access to investigational drugs outside of the clinical trial space and before the commercial launch of the drug, to patients with life-threatening diseases having no treatment options available. In addition to the development of positive relationships with key opinion leaders (KOL), patients, advocacy groups and regulators, the data captured from the implementation of EAPs supports in the formulation of global commercialization strategies. This white paper outlines various circumstances to be considered for the implementation of EAPs named patient programs, the regulatory landscape, the benefits and challenges associated with implementing these programs and the key considerations for their successful implementation. PMID:26955570

EEG and Eye Tracking Demonstrate Vigilance Enhancement with Challenge Integration

PubMed Central

Bodala, Indu P.; Li, Junhua; Thakor, Nitish V.; Al-Nashash, Hasan

2016-01-01

Maintaining vigilance is possibly the first requirement for surveillance tasks where personnel are faced with monotonous yet intensive monitoring tasks. Decrement in vigilance in such situations could result in dangerous consequences such as accidents, loss of life and system failure. In this paper, we investigate the possibility to enhance vigilance or sustained attention using “challenge integration,” a strategy that integrates a primary task with challenging stimuli. A primary surveillance task (identifying an intruder in a simulated factory environment) and a challenge stimulus (periods of rain obscuring the surveillance scene) were employed to test the changes in vigilance levels. The effect of integrating challenging events (resulting from artificially simulated rain) into the task were compared to the initial monotonous phase. EEG and eye tracking data is collected and analyzed for n = 12 subjects. Frontal midline theta power and frontal theta to parietal alpha power ratio which are used as measures of engagement and attention allocation show an increase due to challenge integration (p < 0.05 in each case). Relative delta band power of EEG also shows statistically significant suppression on the frontoparietal and occipital cortices due to challenge integration (p < 0.05). Saccade amplitude, saccade velocity and blink rate obtained from eye tracking data exhibit statistically significant changes during the challenge phase of the experiment (p < 0.05 in each case). From the correlation analysis between the statistically significant measures of eye tracking and EEG, we infer that saccade amplitude and saccade velocity decrease with vigilance decrement along with frontal midline theta and frontal theta to parietal alpha ratio. Conversely, blink rate and relative delta power increase with vigilance decrement. However, these measures exhibit a reverse trend when challenge stimulus appears in the task suggesting vigilance enhancement. Moreover, the mean

Additive manufacturing of microfluidic glass chips

NASA Astrophysics Data System (ADS)

Kotz, F.; Helmer, D.; Rapp, B. E.

2018-02-01

Additive manufacturing has gained great interest in the microfluidic community due to the numerous channel designs which can be tested in the early phases of a lab-on-a-chip device development. High resolution additive manufacturing like microstereolithography is largely associated with polymers. Polymers are at a disadvantage compared to other materials due to their softness and low chemical resistance. Whenever high chemical and thermal resistance combined with high optical transparency is needed, glasses become the material of choice. However, glasses are difficult to structure at the microscale requiring hazardous chemicals for etching processes. In this work we present additive manufacturing and high resolution patterning of microfluidic chips in transparent fused silica glass using stereolithography and microlithography. We print an amorphous silica nanocomposite at room temperature using benchtop stereolithography printers and a custom built microlithography system based on a digital mirror device. Using microlithography we printed structures with tens of micron resolution. The printed part is then converted to a transparent fused silica glass using thermal debinding and sintering. Printing of a microfluidic chip can be done within 30 minutes. The heat treatment can be done within two days.

Protection of Renewable-dominated Microgrids: Challenges and Potential Solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elkhatib, Mohamed; Ellis, Abraham; Biswal, Milan

In this report we address the challenge of designing efficient protection system for inverter- dominated microgrids. These microgrids are characterised with limited fault current capacity as a result of current-limiting protection functions of inverters. Typically, inverters limit their fault contribution in sub-cycle time frame to as low as 1.1 per unit. As a result, overcurrent protection could fail completely to detect faults in inverter-dominated microgrids. As part of this project a detailed literature survey of existing and proposed microgrid protection schemes were conducted. The survey concluded that there is a gap in the available microgrid protection methods. The only crediblemore » protection solution available in literature for low- fault inverter-dominated microgrids is the differential protection scheme which represents a robust transmission-grade protection solution but at a very high cost. Two non-overcurrent protection schemes were investigated as part of this project; impedance-based protection and transient-based protection. Impedance-based protection depends on monitoring impedance trajectories at feeder relays to detect faults. Two communication-based impedance-based protection schemes were developed. the first scheme utilizes directional elements and pilot signals to locate the fault. The second scheme depends on a Central Protection Unit that communicates with all feeder relays to locate the fault based on directional flags received from feeder relays. The later approach could potentially be adapted to protect networked microgrids and dynamic topology microgrids. Transient-based protection relies on analyzing high frequency transients to detect and locate faults. This approach is very promising but its implementation in the filed faces several challenges. For example, high frequency transients due to faults can be confused with transients due to other events such as capacitor switching. Additionally, while detecting faults by analyzing

An Overview on Additive Manufacturing of Polymers

NASA Astrophysics Data System (ADS)

Jasiuk, Iwona; Abueidda, Diab W.; Kozuch, Christopher; Pang, Siyuan; Su, Frances Y.; McKittrick, Joanna

2018-03-01

We present an overview on additive manufacturing (AM), also called three-dimensional printing, with a focus on polymers. First, we introduce the AM concept. Next, we outline several AM processes, including their advantages and limitations, and list common polymers that are used in commercial printers. Then, we state various AM applications and present two examples. We conclude with a global view of the AM field, its challenges, and future directions.

Challenges of Big Data Analysis.

PubMed

Fan, Jianqing; Han, Fang; Liu, Han

2014-06-01

Big Data bring new opportunities to modern society and challenges to data scientists. On one hand, Big Data hold great promises for discovering subtle population patterns and heterogeneities that are not possible with small-scale data. On the other hand, the massive sample size and high dimensionality of Big Data introduce unique computational and statistical challenges, including scalability and storage bottleneck, noise accumulation, spurious correlation, incidental endogeneity, and measurement errors. These challenges are distinguished and require new computational and statistical paradigm. This article gives overviews on the salient features of Big Data and how these features impact on paradigm change on statistical and computational methods as well as computing architectures. We also provide various new perspectives on the Big Data analysis and computation. In particular, we emphasize on the viability of the sparsest solution in high-confidence set and point out that exogeneous assumptions in most statistical methods for Big Data can not be validated due to incidental endogeneity. They can lead to wrong statistical inferences and consequently wrong scientific conclusions.

Challenges of Big Data Analysis

PubMed Central

Fan, Jianqing; Han, Fang; Liu, Han

2014-01-01

Big Data bring new opportunities to modern society and challenges to data scientists. On one hand, Big Data hold great promises for discovering subtle population patterns and heterogeneities that are not possible with small-scale data. On the other hand, the massive sample size and high dimensionality of Big Data introduce unique computational and statistical challenges, including scalability and storage bottleneck, noise accumulation, spurious correlation, incidental endogeneity, and measurement errors. These challenges are distinguished and require new computational and statistical paradigm. This article gives overviews on the salient features of Big Data and how these features impact on paradigm change on statistical and computational methods as well as computing architectures. We also provide various new perspectives on the Big Data analysis and computation. In particular, we emphasize on the viability of the sparsest solution in high-confidence set and point out that exogeneous assumptions in most statistical methods for Big Data can not be validated due to incidental endogeneity. They can lead to wrong statistical inferences and consequently wrong scientific conclusions. PMID:25419469

Engineering the LISA Project: Systems Engineering Challenges

NASA Technical Reports Server (NTRS)

Evans, Jordan P.

2006-01-01

The Laser Interferometer Space Antenna (LISA) is a joint NASA/ESA mission to detect and measure gravitational waves with periods from 1 s to 10000 s. The systems engineering challenges of developing a giant interferometer, 5 million kilometers on a side, an: numerous. Some of the key challenges are presented in this paper. The organizational challenges imposed by sharing the engineering function between three centers (ESA ESTEC, NASA GSFC, and JPL) across nine time zones are addressed. The issues and approaches to allocation of the acceleration noise and measurement sensitivity budget terms across a traditionally decomposed system are discussed. Additionally, using LISA to detect gravitational waves for the first time presents significant data analysis challenges, many of which drive the project system design. The approach to understanding the implications of science data analysis on the system is also addressed.

Using the Design for Demise Philosophy to Reduce Casualty Risk Due to Reentering Spacecraft

NASA Technical Reports Server (NTRS)

Kelley, R. L.

2012-01-01

Recently the reentry of a number of vehicles has garnered public attention due to their risk of human casualty due to fragments surviving reentry. In order to minimize this risk for their vehicles, a number of NASA programs have actively sought to minimize the number of components likely to survive reentry at the end of their spacecraft's life in order to meet and/or exceed NASA safety standards for controlled and uncontrolled reentering vehicles. This philosophy, referred to as "Design for Demise" or D4D, has steadily been adopted, to at least some degree, by numerous programs. The result is that many programs are requesting evaluations of components at the early stages of vehicle design, as they strive to find ways to reduce the number surviving components while ensuring that the components meet the performance requirements of their mission. This paper will discuss some of the methods that have been employed to ensure that the consequences of the vehicle s end-of-life are considered at the beginning of the design process. In addition this paper will discuss the technical challenges overcome, as well as some of the more creative solutions which have been utilized to reduce casualty risk.

Single-Dose Intranasal Treatment with DEF201 (Adenovirus Vectored Consensus Interferon) Prevents Lethal Disease Due to Rift Valley Fever Virus Challenge

PubMed Central

Gowen, Brian B.; Ennis, Jane; Bailey, Kevin W.; Vest, Zachary; Scharton, Dionna; Sefing, Eric J.; Turner, Jeffrey D.

2014-01-01

Rift Valley fever virus (RVFV) causes severe disease in humans and ungulates. The virus can be transmitted by mosquitoes, direct contact with infected tissues or fluids, or aerosol, making it a significant biological threat for which there is no approved vaccine or therapeutic. Herein we describe the evaluation of DEF201, an adenovirus-vectored interferon alpha which addresses the limitations of recombinant interferon alpha protein (cost, short half-life), as a pre- and post-exposure treatment in a lethal hamster RVFV challenge model. DEF201 was delivered intranasally to stimulate mucosal immunity and effectively bypass any pre-existing immunity to the vector. Complete protection against RVFV infection was observed from a single dose of DEF201 administered one or seven days prior to challenge while all control animals succumbed within three days of infection. Efficacy of treatment administered two weeks prior to challenge was limited. Post‑exposure, DEF201 was able to confer significant protection when dosed at 30 min or 6 h, but not at 24 h post-RVFV challenge. Protection was associated with reductions in serum and tissue viral loads. Our findings suggest that DEF201 may be a useful countermeasure against RVFV infection and further demonstrates its broad-spectrum capacity to stimulate single dose protective immunity. PMID:24662673

Emergency mapping and information management during Nepal Earthquake 2015 - Challenges and lesson learned

NASA Astrophysics Data System (ADS)

Joshi, G.; Gurung, D. R.

2016-12-01

A powerful 7.8 magnitude earthquake struck Nepal at 06:11 UTC on 25 April 2015. Several subsequent aftershocks were deadliest earthquake in recent history of Nepal. In total about 9000 people died and 22,300 people were injured, and lives of eight million people, almost one-third of the population of Nepal was effected. The event lead to massive campaigned to gather data and information on damage and loss using remote sensing, field inspection, and community survey. Information on distribution of relief materials is other important domain of information necessary for equitable relief distribution. Pre and post-earthquake high resolution satellite images helped in damage area assessment and mapping. Many national and international agencies became active to generate and fill the information vacuum. The challenges included data access bottleneck due to lack of good IT infrastructure; inconsistent products due to absence of standard mapping guidelines; dissemination challenges due to absence of Standard Operating Protocols and single information gateway. These challenges were negating opportunities offered by improved earth observation data availability, increasing engagement of volunteers for emergency mapping, and centralized emergency coordination practice. This paper highlights critical practical challenges encountered during emergency mapping and information management during the earthquake in Nepal. There is greater need to address such challenges to effectively use technological leverages that recent advancement in space science, IT and mapping domain provides.

Anatomically ordered tapping interferes more with one-digit addition than two-digit addition: a dual-task fMRI study.

PubMed

Soylu, Firat; Newman, Sharlene D

2016-02-01

Fingers are used as canonical representations for numbers across cultures. In previous imaging studies, it was shown that arithmetic processing activates neural resources that are known to participate in finger movements. Additionally, in one dual-task study, it was shown that anatomically ordered finger tapping disrupts addition and subtraction more than multiplication, possibly due to a long-lasting effect of early finger counting experiences on the neural correlates and organization of addition and subtraction processes. How arithmetic task difficulty and tapping complexity affect the concurrent performance is still unclear. If early finger counting experiences have bearing on the neural correlates of arithmetic in adults, then one would expect anatomically and non-anatomically ordered tapping to have different interference effects, given that finger counting is usually anatomically ordered. To unravel these issues, we studied how (1) arithmetic task difficulty and (2) the complexity of the finger tapping sequence (anatomical vs. non-anatomical ordering) affect concurrent performance and use of key neural circuits using a mixed block/event-related dual-task fMRI design with adult participants. The results suggest that complexity of the tapping sequence modulates interference on addition, and that one-digit addition (fact retrieval), compared to two-digit addition (calculation), is more affected from anatomically ordered tapping. The region-of-interest analysis showed higher left angular gyrus BOLD response for one-digit compared to two-digit addition, and in no-tapping conditions than dual tapping conditions. The results support a specific association between addition fact retrieval and anatomically ordered finger movements in adults, possibly due to finger counting strategies that deploy anatomically ordered finger movements early in the development.

Solidification and solid-state transformation sciences in metals additive manufacturing

DOE PAGES

Kirka, Michael M.; Nandwana, Peeyush; Lee, Yousub; ...

2017-02-11

Additive manufacturing (AM) of metals is rapidly emerging as an established manufacturing process for metal components. Unlike traditional metals fabrication processes, metals fabricated via AM undergo localized thermal cycles during fabrication. As a result, AM presents the opportunity to control the liquid-solid phase transformation, i.e. material texture. But, thermal cycling presents challenges from the standpoint of solid-solid phase transformations. We will discuss the opportunities and challenges in metals AM in the context of texture control and associated solid-solid phase transformations in Ti-6Al-4V and Inconel 718.

Candida Biofilms: Threats, Challenges, and Promising Strategies.

PubMed

Cavalheiro, Mafalda; Teixeira, Miguel Cacho

2018-01-01

Candida species are fungal pathogens known for their ability to cause superficial and systemic infections in the human host. These pathogens are able to persist inside the host due to the development of pathogenicity and multidrug resistance traits, often leading to the failure of therapeutic strategies. One specific feature of Candida species pathogenicity is their ability to form biofilms, which protects them from external factors such as host immune system defenses and antifungal drugs. This review focuses on the current threats and challenges when dealing with biofilms formed by Candida albicans, Candida glabrata, Candida tropicalis , and Candida parapsilosis , highlighting the differences between the four species. Biofilm characteristics depend on the ability of each species to produce extracellular polymeric substances (EPS) and display dimorphic growth, but also on the biofilm substratum, carbon source availability and other factors. Additionally, the transcriptional control over processes like adhesion, biofilm formation, filamentation, and EPS production displays great complexity and diversity within pathogenic yeasts of the Candida genus. These differences not only have implications in the persistence of colonization and infections but also on antifungal resistance typically found in Candida biofilm cells, potentiated by EPS, that functions as a barrier to drug diffusion, and by the overexpression of drug resistance transporters. The ability to interact with different species in in vivo Candida biofilms is also a key factor to consider when dealing with this problem. Despite many challenges, the most promising strategies that are currently available or under development to limit biofilm formation or to eradicate mature biofilms are discussed.

Candida Biofilms: Threats, Challenges, and Promising Strategies

PubMed Central

Cavalheiro, Mafalda; Teixeira, Miguel Cacho

2018-01-01

Candida species are fungal pathogens known for their ability to cause superficial and systemic infections in the human host. These pathogens are able to persist inside the host due to the development of pathogenicity and multidrug resistance traits, often leading to the failure of therapeutic strategies. One specific feature of Candida species pathogenicity is their ability to form biofilms, which protects them from external factors such as host immune system defenses and antifungal drugs. This review focuses on the current threats and challenges when dealing with biofilms formed by Candida albicans, Candida glabrata, Candida tropicalis, and Candida parapsilosis, highlighting the differences between the four species. Biofilm characteristics depend on the ability of each species to produce extracellular polymeric substances (EPS) and display dimorphic growth, but also on the biofilm substratum, carbon source availability and other factors. Additionally, the transcriptional control over processes like adhesion, biofilm formation, filamentation, and EPS production displays great complexity and diversity within pathogenic yeasts of the Candida genus. These differences not only have implications in the persistence of colonization and infections but also on antifungal resistance typically found in Candida biofilm cells, potentiated by EPS, that functions as a barrier to drug diffusion, and by the overexpression of drug resistance transporters. The ability to interact with different species in in vivo Candida biofilms is also a key factor to consider when dealing with this problem. Despite many challenges, the most promising strategies that are currently available or under development to limit biofilm formation or to eradicate mature biofilms are discussed. PMID:29487851

Novel excipients - Regulatory challenges and perspectives - The EU insight.

PubMed

Kozarewicz, Piotr; Loftsson, Thorsteinn

2018-05-21

Novel excipients are indispensable in development of modern, advanced drug delivery systems and biotechnology-derived drugs. Although numerous novel excipients are developed for pharmaceutical use, they are not frequently seen in medicinal products due to the strict regulatory requirements and perception that their use makes new product evaluation more complex with risk of delays in the approval process. Regulators regard novel excipients as new substances and whenever new excipient is used in a formulation it must be subjected to full evaluation, similarly to the one required for new active substance. Consequently, the amount of information required in support of the regulatory approval (i.e. marketing authorization) is much more complex and comprehensive than for established excipients. This short review provides an insight into the use of novel excipients in medicinal products approved in the European Union. In addition, barriers and challenges in development of novel excipients are being discussed as well as means to overcome those barriers. Copyright © 2018 Elsevier B.V. All rights reserved.

Vocational and Technical Education in Lebanon: Strategic Issues and Challenges

ERIC Educational Resources Information Center

Karam, Gebran

2006-01-01

The current status of the Lebanese vocational and technical education (VTE) system is assessed and the strategic issues and challenges facing it are identified. In addition to the economic and social challenges that are common to many developing countries, the Lebanese system suffers from idiosyncratic problems, which may require innovative and…

A Statistician's View of Upcoming Grand Challenges

NASA Astrophysics Data System (ADS)

Meng, Xiao Li

2010-01-01

In this session we have seen some snapshots of the broad spectrum of challenges, in this age of huge, complex, computer-intensive models, data, instruments,and questions. These challenges bridge astronomy at many wavelengths; basic physics; machine learning; -- and statistics. At one end of our spectrum, we think of 'compressing' the data with non-parametric methods. This raises the question of creating 'pseudo-replicas' of the data for uncertainty estimates. What would be involved in, e.g. boot-strap and related methods? Somewhere in the middle are these non-parametric methods for encapsulating the uncertainty information. At the far end, we find more model-based approaches, with the physics model embedded in the likelihood and analysis. The other distinctive problem is really the 'black-box' problem, where one has a complicated e.g. fundamental physics-based computer code, or 'black box', and one needs to know how changing the parameters at input -- due to uncertainties of any kind -- will map to changing the output. All of these connect to challenges in complexity of data and computation speed. Dr. Meng will highlight ways to 'cut corners' with advanced computational techniques, such as Parallel Tempering and Equal Energy methods. As well, there are cautionary tales of running automated analysis with real data -- where "30 sigma" outliers due to data artifacts can be more common than the astrophysical event of interest.

Forensic Evaluation of Deaf Individuals: Challenges and Strategies.

PubMed

Pollard, Robert Q; Berlinski, Brian T

2017-01-01

Forensic evaluation of deaf individuals presents unique challenges due to many examinees' fund of information deficits, potential for language deprivation, and examiners' frequent lack of creativity regarding communication methods. This article describes challenges most frequently encountered in competency to stand trial and criminal responsibility evaluations and offers strategies for overcoming them. The value of employing multiple communication methods, especially the use of illustrations, is emphasized. Suggestions also are offered regarding preparing evaluation reports and effectively communicating "key deaf fundamentals" to legal personnel. Encouragement is offered for qualified, sign-fluent professionals to engage in forensic work.

Myomectomy for retained placenta due to incarcerated fibroid mass.

PubMed

Mbamara, S U; Daniyan, Abc; Osaro, Ejenobo; Mbah, I C

2015-01-01

Retained placenta is one of the most common complications of preterm delivery and/or mid-trimester miscarriage. It is an important cause of increased maternal morbidity and sometimes mortality especially in developing countries. It is associated with several complications that could be tasking to the facility and of great challenge to the obstetrician. Here we present a very rare event in obstetrics which is retained placenta due to incarcerated, posteriorly-sited fibroid that was successfully managed with myomectomy.

An Evaluation of ChalleNGe Graduates DOD Employability

DTIC Science & Technology

2017-12-01

long-term impacts for ChalleNGe graduates. Our previous work has shown that cadets with higher initial reading and applied math TABE scores are...levels of reading comprehension, writing, and basic math ; they simply are not ready to acquire a second language. In addition, program directors noted...graduates. Our previous work has shown that cadets with higher initial reading and applied math TABE scores are more likely to complete ChalleNGe. In

Laser polishing of additive manufactured Ti alloys

NASA Astrophysics Data System (ADS)

Ma, C. P.; Guan, Y. C.; Zhou, W.

2017-06-01

Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

Additive Technology: Update on Current Materials and Applications in Dentistry.

PubMed

Barazanchi, Abdullah; Li, Kai Chun; Al-Amleh, Basil; Lyons, Karl; Waddell, J Neil

2017-02-01

Additive manufacturing or 3D printing is becoming an alternative to subtractive manufacturing or milling in the area of computer-aided manufacturing. Research on material for use in additive manufacturing is ongoing, and a wide variety of materials are being used or developed for use in dentistry. Some materials, however, such as cobalt chromium, still lack sufficient research to allow definite conclusions about the suitability of their use in clinical dental practice. Despite this, due to the wide variety of machines that use additive manufacturing, there is much more flexibility in the build material and geometry when building structures compared with subtractive manufacturing. Overall additive manufacturing produces little material waste and is energy efficient when compared to subtractive manufacturing, due to passivity and the additive layering nature of the build process. Such features make the technique suitable to be used with fabricating structures out of hard to handle materials such as cobalt chromium. The main limitations of this technology include the appearance of steps due to layering of material and difficulty in fabricating certain material generally used in dentistry for use in 3D printing such as ceramics. The current pace of technological development, however, promises exciting possibilities. © 2016 by the American College of Prosthodontists.

Culture and neuroscience: additive or synergistic?

PubMed Central

Dapretto, Mirella; Iacoboni, Marco

2010-01-01

The investigation of cultural phenomena using neuroscientific methods—cultural neuroscience (CN)—is receiving increasing attention. Yet it is unclear whether the integration of cultural study and neuroscience is merely additive, providing additional evidence of neural plasticity in the human brain, or truly synergistic, yielding discoveries that neither discipline could have achieved alone. We discuss how the parent fields to CN: cross-cultural psychology, psychological anthropology and cognitive neuroscience inform the investigation of the role of cultural experience in shaping the brain. Drawing on well-established methodologies from cross-cultural psychology and cognitive neuroscience, we outline a set of guidelines for CN, evaluate 17 CN studies in terms of these guidelines, and provide a summary table of our results. We conclude that the combination of culture and neuroscience is both additive and synergistic; while some CN methodologies and findings will represent the direct union of information from parent fields, CN studies employing the methodological rigor required by this logistically challenging new field have the potential to transform existing methodologies and produce unique findings. PMID:20083533

Y2K, embedded chips, casualty hazards and due diligence in healthcare risk management.

PubMed

Childers, J R

1998-01-01

Y2K raises challenges for healthcare risk managers that go beyond information technology issues. This article explains that (1) too little public attention is being paid to equipment which may well have Y2K faults and (2) few standards have been articulated for dealing with problems. Healthcare risk managers therefore must return to basic due diligence principles and develop their own standards and protocols. The article explains how to do due diligence and outlines suggested steps for dealing with the non-information technology side of compliance due diligence.

Thyrotropinoma and multinodular goiter: A diagnostic challenge for hyperthyroidism.

PubMed

Aksoy, Duygu Yazgan; Gedik, Arzu; Cinar, Nese; Soylemezoglu, Figen; Berker, Mustafa; Gurlek, Omer Alper

2013-11-01

Thyroid disorders are frequently encountered. The diagnosis is straightforward unless clinical or laboratory findings are inconclusive and/or perplexing. Hyperthyroidism due to a thyrotropin-secreting pituitary adenoma rarely occurs and symptoms due to thyroid hormone excess are subtle. The presentation of the disease becomes unusual when co-secretion of other hormones with thyrotropin or concomitant thyroid parenchymal pathology exist. We present the case of a 63-year-old female patient with thyrotropinoma co-secreting growth hormone and multinodular goiter. She developed hyperthyroidism first due to thyrotropinoma and later due to a toxic nodule. Herein, we discuss the diagnostic and therapeutic challenges of hyperthyroidism with atypical presentation.

Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges.

PubMed

Singhal, Ayush; Leaman, Robert; Catlett, Natalie; Lemberger, Thomas; McEntyre, Johanna; Polson, Shawn; Xenarios, Ioannis; Arighi, Cecilia; Lu, Zhiyong

2016-01-01

Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system 'accuracy' remains a challenge and identify several additional common difficulties and potential research directions including (i) the 'scalability' issue due to the increasing need of mining information from millions of full-text articles, (ii) the 'interoperability' issue of integrating various text-mining systems into existing curation workflows and (iii) the 'reusability' issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. Finally, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators. Published by Oxford University Press 2016. This work is written by US Government employees and is in the public domain in the US.

School Building Designs: Principles and Challenges of the 21st Century.

ERIC Educational Resources Information Center

Chan, T. C.

2002-01-01

Reviews school-facility challenges and design principles described in 2000 U.S. Department of Education report on school planning and design. Describes additional school-facility design challenges and planning principles. Describes five critical facility-planning issues for the 21st Century. (Contains 14 references.) (PKP)

Mechanism of wear and tribofilm formation with ionic liquids and ashless antiwear additives

NASA Astrophysics Data System (ADS)

Sharma, Vibhu

Increasingly stringent government regulation on emissions (EPA Emissions Standard Reference Guide and latest CAFE standards requiring an average fuel economy of 54.5 mpg (combined cars and trucks) by 2025) impose significant challenges to the automotive and lubricant industries calling for the development and implementation of lower viscosity ILSAC GF-5&6 and API-CJ4&5 oils which further limit the amount of SAPS and deposits in engines. Development of additives that result in lower ash content, volatility and anti-wear property plays a crucial role in being able to reach these standards. The current industrial additive technology i.e. zinc dialkyldithiophosphate (ZDDP) forms harmful deposits on catalytic convertor due to the volatility of Zn, S and P which, impairs its functionality and consequently results in higher emission from vehicles. In this research work, ionic liquids (IL's) that are non-volatile have been studied as new generation environment friendly antiwear additives along with other ashless anti-wear additives including boron based additives to overcome the current challenges of improving the fuel efficiency and reducing the amount of hazardous emissions. The goal of this thesis work is to study the tribological performance of selected IL's and develop a comprehensive understating of IL's chemistry and its consequences to their friction and wear outcomes. As first approach, various P, S and F based ionic liquids are studied for their tribological properties by analyzing the friction and wear results generated using standard tribological experiments. Following this, advanced surface characterization techniques such as X-ray absorption near edge structure (XANES) spectroscopy, SEM, Nano-indentation, SPM techniques are used to investigate the chemical-mechanical properties of the antiwear films. Results indicate that the tribological properties of ionic liquids depend on their solubility in base oil (BO) as well as their chemical interaction with the

Radiation Test Challenges for Scaled Commerical Memories

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Ladbury, Ray L.; Cohn, Lewis M.; Oldham, Timothy

2007-01-01

As sub-100nm CMOS technologies gather interest, the radiation effects performance of these technologies provide a significant challenge. In this talk, we shall discuss the radiation testing challenges as related to commercial memory devices. The focus will be on complex test and failure modes emerging in state-of-the-art Flash non-volatile memories (NVMs) and synchronous dynamic random access memories (SDRAMs), which are volatile. Due to their very high bit density, these device types are highly desirable for use in the natural space environment. In this presentation, we shall discuss these devices with emphasis on considerations for test and qualification methods required.

2018 Human Exploration Rover Challenge event

NASA Image and Video Library

2018-04-17

High school and university students competed in the 2018 Human Exploration Rover Challenge event at the U.S. Space and Rocket Center in Huntsville, Alabama. Students came from across the U.S. as well as several foreign countries such as Brazil, Germany, India, and Mexico. This event, which is normally a 2 day event, was shortened to 1 day in 2018 due to adverse weather conditions.

Practical Considerations and Challenges Involved in Surfactant Enhanced Bioremediation of Oil

PubMed Central

Mohanty, Sagarika; Jasmine, Jublee

2013-01-01

Surfactant enhanced bioremediation (SEB) of oil is an approach adopted to overcome the bioavailability constraints encountered in biotransformation of nonaqueous phase liquid (NAPL) pollutants. Fuel oils contain n-alkanes and other aliphatic hydrocarbons, monoaromatics, and polynuclear aromatic hydrocarbons (PAHs). Although hydrocarbon degrading cultures are abundant in nature, complete biodegradation of oil is rarely achieved even under favorable environmental conditions due to the structural complexity of oil and culture specificities. Moreover, the interaction among cultures in a consortium, substrate interaction effects during the degradation and ability of specific cultures to alter the bioavailability of oil invariably affect the process. Although SEB has the potential to increase the degradation rate of oil and its constituents, there are numerous challenges in the successful application of this technology. Success is dependent on the choice of appropriate surfactant type and dose since the surfactant-hydrocarbon-microorganism interaction may be unique to each scenario. Surfactants not only enhance the uptake of constituents through micellar solubilization and emulsification but can also alter microbial cell surface characteristics. Moreover, hydrocarbons partitioned in micelles may not be readily bioavailable depending on the microorganism-surfactant interactions. Surfactant toxicity and inherent biodegradability of surfactants may pose additional challenges as discussed in this review. PMID:24350261

Advantages and Challenges of 10-Gbps Transmission on High-Density Interconnect Boards

NASA Astrophysics Data System (ADS)

Yee, Chang Fei; Jambek, Asral Bahari; Al-Hadi, Azremi Abdullah

2016-06-01

This paper provides a brief introduction to high-density interconnect (HDI) technology and its implementation on printed circuit boards (PCBs). The advantages and challenges of implementing 10-Gbps signal transmission on high-density interconnect boards are discussed in detail. The advantages (e.g., smaller via dimension and via stub removal) and challenges (e.g., crosstalk due to smaller interpair separation) of HDI are studied by analyzing the S-parameter, time-domain reflectometry (TDR), and transmission-line eye diagrams obtained by three-dimensional electromagnetic modeling (3DEM) and two-dimensional electromagnetic modeling (2DEM) using Mentor Graphics HyperLynx and Keysight Advanced Design System (ADS) electronic computer-aided design (ECAD) software. HDI outperforms conventional PCB technology in terms of signal integrity, but proper routing topology should be applied to overcome the challenge posed by crosstalk due to the tight spacing between traces.

Challenges of urban planning in Palestine

NASA Astrophysics Data System (ADS)

Moghayer, Taher J. T.; Tesmamma Daget, Yidnekachew; Wang, Xingping

2017-08-01

For the last two centuries, Palestinian territory had faced several changes. This is due to historical precedents and the unstable political situation in the area. This has resulted in mutli-faced challenges in Palestine. The objective of this paper is to analyse and understand the major factors that had impacted the urban planning, urban form and urban development of the Palestinian territory. The findings showed that the lack of available land, rapid urban population growth, failure in urban planning policy decisions, the unstable political situation on the ground, fragmented urban developments in the west bank area, and also diffusion of urban sprawls within the landscapes and around the cities are the major factors that caused challenges in Palestine’s cities.

Vaccination With a Highly Attenuated Recombinant Vesicular Stomatitis Virus Vector Protects Against Challenge With a Lethal Dose of Ebola Virus

PubMed Central

Matassov, Demetrius; Marzi, Andrea; Latham, Terri; Xu, Rong; Ota-Setlik, Ayuko; Feldmann, Friederike; Geisbert, Joan B.; Mire, Chad E.; Hamm, Stefan; Nowak, Becky; Egan, Michael A.; Geisbert, Thomas W.; Eldridge, John H.; Feldmann, Heinz; Clarke, David K.

2015-01-01

Previously, recombinant vesicular stomatitis virus (rVSV) pseudotypes expressing Ebolavirus glycoproteins (GPs) in place of the VSV G protein demonstrated protection of nonhuman primates from lethal homologous Ebolavirus challenge. Those pseudotype vectors contained no additional attenuating mutations in the rVSV genome. Here we describe rVSV vectors containing a full complement of VSV genes and expressing the Ebola virus (EBOV) GP from an additional transcription unit. These rVSV vectors contain the same combination of attenuating mutations used previously in the clinical development pathway of an rVSV/human immunodeficiency virus type 1 vaccine. One of these rVSV vectors (N4CT1-EBOVGP1), which expresses membrane-anchored EBOV GP from the first position in the genome (GP1), elicited a balanced cellular and humoral GP-specific immune response in mice. Guinea pigs immunized with a single dose of this vector were protected from any signs of disease following lethal EBOV challenge, while control animals died in 7–9 days. Subsequently, N4CT1-EBOVGP1 demonstrated complete, single-dose protection of 2 macaques following lethal EBOV challenge. A single sham-vaccinated macaque died from disease due to EBOV infection. These results demonstrate that highly attenuated rVSV vectors expressing EBOV GP may provide safer alternatives to current EBOV vaccines. PMID:26109675

Fit for high altitude: are hypoxic challenge tests useful?

PubMed

Matthys, Heinrich

2011-02-28

Altitude travel results in acute variations of barometric pressure, which induce different degrees of hypoxia, changing the gas contents in body tissues and cavities. Non ventilated air containing cavities may induce barotraumas of the lung (pneumothorax), sinuses and middle ear, with pain, vertigo and hearing loss. Commercial air planes keep their cabin pressure at an equivalent altitude of about 2,500 m. This leads to an increased respiratory drive which may also result in symptoms of emotional hyperventilation. In patients with preexisting respiratory pathology due to lung, cardiovascular, pleural, thoracic neuromuscular or obesity-related diseases (i.e. obstructive sleep apnea) an additional hypoxic stress may induce respiratory pump and/or heart failure. Clinical pre-altitude assessment must be disease-specific and it includes spirometry, pulsoximetry, ECG, pulmonary and systemic hypertension assessment. In patients with abnormal values we need, in addition, measurements of hemoglobin, pH, base excess, PaO2, and PaCO2 to evaluate whether O2- and CO2-transport is sufficient.Instead of the hypoxia altitude simulation test (HAST), which is not without danger for patients with respiratory insufficiency, we prefer primarily a hyperoxic challenge. The supplementation of normobaric O2 gives us information on the acute reversibility of the arterial hypoxemia and the reduction of ventilation and pulmonary hypertension, as well as about the efficiency of the additional O2-flow needed during altitude exposure. For difficult judgements the performance of the test in a hypobaric chamber with and without supplemental O2-breathing remains the gold standard. The increasing numbers of drugs to treat acute pulmonary hypertension due to altitude exposure (acetazolamide, dexamethasone, nifedipine, sildenafil) or to other etiologies (anticoagulants, prostanoids, phosphodiesterase-5-inhibitors, endothelin receptor antagonists) including mechanical aids to reduce periodical or

Microbial Community Responses to Glycine Addition in Kansas Prairie Soils

NASA Astrophysics Data System (ADS)

Bottos, E.; Roy Chowdhury, T.; White, R. A., III; Brislawn, C.; Fansler, S.; Kim, Y. M.; Metz, T. O.; McCue, L. A.; Jansson, J.

2015-12-01

Advances in sequencing technologies are rapidly expanding our abilities to unravel aspects of microbial community structure and function in complex systems like soil; however, characterizing the highly diverse communities is problematic, due primarily to challenges in data analysis. To tackle this problem, we aimed to constrain the microbial diversity in a soil by enriching for particular functional groups within a community through addition of "trigger substrates". Such trigger substrates, characterized by low molecular weight, readily soluble and diffusible in soil solution, representative of soil organic matter derivatives, would also be rapidly degradable. A relatively small energy investment to maintain the cell in a state of metabolic alertness for such substrates would be a better evolutionary strategy and presumably select for a cohort of microorganisms with the energetics and cellular machinery for utilization and growth. We chose glycine, a free amino acid (AA) known to have short turnover times (in the range of hours) in soil. As such, AAs are a good source of nitrogen and easily degradable, and can serve as building blocks for microbial proteins and other biomass components. We hypothesized that the addition of glycine as a trigger substrate will decrease microbial diversity and evenness, as taxa capable of metabolizing it are enriched in relation to those that are not. We tested this hypothesis by incubating three Kansas native prairie soils with glycine for 24 hours at 21 degree Celsius, and measured community level responses by 16S rRNA gene sequencing, metagenomics, and metatranscriptomics. Preliminary evaluation of 16S rRNA gene sequences revealed minor changes in bacterial community composition in response to glycine addition. We will also present data on functional gene abundance and expression. The results of these analyses will be useful in designing sequencing strategies aimed at dissecting and deciphering complex microbial communities.

Reduced caveolin-1 promotes hyper-inflammation due to abnormal heme oxygenase-1 localizationin LPS challenged macrophages with dysfunctional CFTR

PubMed Central

Zhang, Ping-Xia; Murray, Thomas S.; Villella, Valeria Rachela; Ferrari, Eleonora; Esposito, Speranza; D'Souza, Anthony; Raia, Valeria; Maiuri, Luigi; Krause, Diane S.; Egan, Marie E.; Bruscia, Emanuela M.

2013-01-01

We have previously reported that TLR4 signaling is increased in lipopolysaccharide (LPS) -stimulated Cystic Fibrosis (CF) macrophages (MΦs), contributing to the robust production of pro-inflammatory cytokines. The heme oxygenase (HO-1)/carbon monoxide (CO) pathway modulates cellular redox status, inflammatory responses, and cell survival. The HO-1 enzyme, together with the scaffold protein caveolin 1 (CAV-1), also acts as a negative regulator of TLR4 signaling in MΦs. Here, we demonstrate that in LPS-challenged CF MΦs, HO-1 does not compartmentalize normally to the cell surface and instead accumulates intracellularly. The abnormal HO-1 localization in CF MΦs in response to LPS is due to decreased CAV-1 expression, which is controlled by the cellular oxidative state, and is required for HO-1 delivery to the cell surface. Overexpression of HO-1 or stimulating the pathway with CO-releasing molecules (CORM2)enhancesCAV-1 expression in CF MΦs, suggesting a positive-feed forward loop between HO-1/CO induction and CAV-1 expression. These manipulations reestablished HO-1 and CAV-1 cell surface localization in CF MΦ's. Consistent with restoration of HO-1/CAV-1 negative regulation of TLR4 signaling, genetic or pharmacological (CORM2)-induced enhancement of this pathway decreased the inflammatory response of CF MΦs and CF mice treated with LPS. In conclusion, our results demonstrate that the counter-regulatory HO-1/CO pathway, which is critical in balancing and limiting the inflammatory response, is defective in CF MΦs through a CAV-1-dependent mechanism, exacerbating the CF MΦ's response to LPS. This pathway could be a potential target for therapeutic intervention for CF lung disease. PMID:23606537

Report on July 2015 Additional Protocol Coordinators Best Practices Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gitau, Ernest T.N.; Burbank, Roberta L.; Finch, Valerie A.

After 10 years of implementation experience, the Office of Nonproliferation and Arms Control (NPAC) within the Department of Energy/National Nuclear Security Administration (DOE/NNSA) conducted the Additional Protocol (AP) Coordinators Best Practices Workshop at Oak Ridge National Laboratory from July 29-30, 2015. The goal of this workshop was to identify implementation best practices, lessons learned, and compliance challenges from the various Additional Protocol Coordinators (APCs) at each laboratory in the DOE/NNSA complex and associated sites. The workshop provided the opportunity for participants to share their insights and establish networks that APCs can utilize to continue to discuss challenges (new and old),more » identify best practices, and enhance communication and coordination for reporting multi-lab research projects during review activities. Workshop participants included DOE/NNSA HQ, laboratory and site APCs, seasoned experts, members of the original implementation outreach team, and Field Element and site security representatives.« less

Near-infrared imaging of enamel hypomineralization due to developmental defects

NASA Astrophysics Data System (ADS)

Lee, Robert C.; Jang, Andrew; Fried, Daniel

2017-02-01

The increasing prevalence of mild hypomineralization due to developmental defects on tooth surfaces poses a challenge for caries detection and caries risk assessment and reliable methods need to be developed to discriminate such lesions from active caries lesions that need intervention. Previous studies have demonstrated that areas of hypomineralization are typically covered with a relatively thick surface layer of highly mineralized and transparent enamel similar to arrested lesions. Seventy-six extracted human teeth with mild to moderate degrees of suspicious fluorosis were imaged using near-infrared reflectance and transillumination. Enamel hypomineralization was clearly visible in both modalities. However, it was difficult to distinguish hypomineralization due to developmental defects from caries lesions with contrast measurements alone. The location of the lesion on tooth coronal surface (i.e. generalized vs. localized) seems to be the most important indicator for the presence of enamel hypomineralization due to developmental defects.

Near-infrared imaging of enamel hypomineralization due to developmental defects.

PubMed

Lee, Robert C; Jang, Andrew; Fried, Daniel

2017-01-28

The increasing prevalence of mild hypomineralization due to developmental defects on tooth surfaces poses a challenge for caries detection and caries risk assessment and reliable methods need to be developed to discriminate such lesions from active caries lesions that need intervention. Previous studies have demonstrated that areas of hypomineralization are typically covered with a relatively thick surface layer of highly mineralized and transparent enamel similar to arrested lesions. Seventy-six extracted human teeth with mild to moderate degrees of suspicious fluorosis were imaged using near-infrared reflectance and transillumination. Enamel hypomineralization was clearly visible in both modalities. However, it was difficult to distinguish hypomineralization due to developmental defects from caries lesions with contrast measurements alone. The location of the lesion on tooth coronal surface (i.e. generalized vs. localized) seems to be the most important indicator for the presence of enamel hypomineralization due to developmental defects.

Myomectomy for Retained Placenta Due to Incarcerated Fibroid Mass

PubMed Central

Mbamara, SU; Daniyan, ABC; Osaro, Ejenobo; Mbah, IC

2015-01-01

Retained placenta is one of the most common complications of preterm delivery and/or mid-trimester miscarriage. It is an important cause of increased maternal morbidity and sometimes mortality especially in developing countries. It is associated with several complications that could be tasking to the facility and of great challenge to the obstetrician. Here we present a very rare event in obstetrics which is retained placenta due to incarcerated, posteriorly-sited fibroid that was successfully managed with myomectomy. PMID:25861539

Youth mortality due to HIV/AIDS in South Africa, 2001-2009: an analysis of the levels of mortality using life table techniques.

PubMed

De Wet, Nicole; Oluwaseyi, Somefun; Odimegwu, Clifford

2014-01-01

South Africa has one of the highest HIV/AIDS prevalence rates in the world. It is estimated that 5.38 million South Africans are living with HIV/AIDS. In addition, new infections among adults aged 15+ were reportedly 316 900 in 2011. New infections among children (0-14 years old) was also high in 2011 at 63 600. This paper examines South Africa's mortality due to HIV/AIDS among the youth (15-34 years old). This age group is of fundamental importance to the economic and social development of the country. However, the challenges of youth development remain vast and incomparable. One of these challenges is the impact of HIV/AIDS on mortality. Life table techniques are used to estimate among others, sex differentials in death rates for the youth population, probability of dying from HIV/AIDS before the age of 35 and life expectancy should HIV/AIDS be eradicated from the population. The study used data from the National Registry of Deaths, as collated by Statistics South Africa from 2001 to 2009. Results show that youth mortality due to HIV/AIDS has remained consistently higher among older youths than in younger ones. By sex, mortality due to this cause has also remained consistent over the period, with mortality due to HIV/AIDS being higher among females than males. Cause-specific mortality rates and proportional mortality ratios reflect the increased mortality of older youth (especially 30-34 years old) and females within the South African population. Probability of dying from HIV/AIDS shows that over the period, fluctuations in likelihood of mortality have occurred, but for both males and females (of all age groups) the chances of dying from this cause decreased in 2007-2009.

Reproductive health care for asylum-seeking women - a challenge for health professionals.

PubMed

Kurth, Elisabeth; Jaeger, Fabienne N; Zemp, Elisabeth; Tschudin, Sibil; Bischoff, Alexander

2010-11-01

Dealing with pregnancy, childbirth and the care of newborn babies is a challenge for female asylum seekers and their health care providers. The aim of our study was to identify reproductive health issues in a population of women seeking asylum in Switzerland, and to examine the care they received. The women were insured through a special Health Maintenance Organisation (HMO) and were attending the Women's Clinic of the University Hospital in Basel. We also investigated how the health professionals involved perceived the experience of providing health care for these patients. A mixed methods approach combined the analysis of quantitative descriptive data and qualitative data obtained from semi-structured interviews with health care providers and from patients' files. We analysed the records of 80 asylum-seeking patients attending the Women's Clinic insured through an HMO. We conducted semi-structured interviews with 10 care providers from different professional groups. Quantitative data were analysed descriptively. Qualitative data analysis was guided by Grounded Theory. The principal health problems among the asylum seekers were a high rate of induced abortions (2.5 times higher than in the local population), due to inadequate contraception, and psychosocial stress due to the experience of forced migration and their current difficult life situation. The language barriers were identified as a major difficulty for health professionals in providing care. Health care providers also faced major emotional challenges when taking care of asylum seekers. Additional problems for physicians were that they were often required to act in an official capacity on behalf of the authorities in charge of the asylum process, and they also had to make decisions about controlling expenditure to fulfil the requirements of the HMO. They felt that these decisions sometimes conflicted with their duty towards the patient. Health policies for asylum seekers need to be designed to assure

Budgetary Challenges of Higher Education: Evidence from Bangladesh

ERIC Educational Resources Information Center

Sarkar, Shakhawat Hossain; Hossain, Syed Zabid

2016-01-01

This study strives to ascertain the financial and nonfinancial challenges of higher education budget for human resources development (HRD) based on both primary and secondary sources of data. Inadequate budgetary support from the government and inappropriate implementation of the same due to nonexistence of good governance and inefficient…

Implementation Challenges for a Constructivist Physical Education Curriculum

ERIC Educational Resources Information Center

Zhu, Xihe; Ennis, Catherine D.; Chen, Ang

2011-01-01

Background: Curriculum fidelity describes the extent to which a curriculum is implemented faithfully as planned. Curriculum fidelity issues may arise when teachers implement the curriculum inconsistently due to differences in philosophy, barriers in the setting, or other local concerns. Purpose: The study examined challenges that a teacher faced…

Industrial Development and Challenges of Water Pollution in Coastal Areas: The Case of Surat, India

NASA Astrophysics Data System (ADS)

Bansal, Neeru

2018-03-01

Industrialisation plays an important role in the economic development of a country, however, pollution is the inevitable price paid for this development. Surat, a major industrial hub in western India, is located on the bank of the river Tapi and extends up to the Arabian Sea. The city is characterised by the presence of a number of creeks (known as ‘khadis’ in local language). This paper focusses on the industrial development in Surat and the challenges faced by the city due to water pollution. A constant deterioration in the quality of surface water resources has been observed due to discharge of treated or partially treated effluents from the industries. The problem of water pollution becomes critical due to increase in frequency of flooding, risks faced by the city due to climate change and the ineffective environmental governance. The paper provides insights into the challenges faced by the city and the learnings can lead to adoption of policy initiatives and other measures which can effectively address these challenges.

Challenges and opportunities of open data in ecology.

PubMed

Reichman, O J; Jones, Matthew B; Schildhauer, Mark P

2011-02-11

Ecology is a synthetic discipline benefiting from open access to data from the earth, life, and social sciences. Technological challenges exist, however, due to the dispersed and heterogeneous nature of these data. Standardization of methods and development of robust metadata can increase data access but are not sufficient. Reproducibility of analyses is also important, and executable workflows are addressing this issue by capturing data provenance. Sociological challenges, including inadequate rewards for sharing data, must also be resolved. The establishment of well-curated, federated data repositories will provide a means to preserve data while promoting attribution and acknowledgement of its use.

An Inventory of Methods for the Assessment of Additive Increased Addictiveness of Tobacco Products

PubMed Central

van de Nobelen, Suzanne; Kienhuis, Anne S.

2016-01-01

Background: Cigarettes and other forms of tobacco contain the addictive drug nicotine. Other components, either naturally occurring in tobacco or additives that are intentionally added during the manufacturing process, may add to the addictiveness of tobacco products. As such, these components can make cigarette smokers more easily and heavily dependent. Efforts to regulate tobacco product dependence are emerging globally. Additives that increase tobacco dependence will be prohibited under the new European Tobacco Product Directive. Objective: This article provides guidelines and recommendations for developing a regulatory strategy for assessment of increase in tobacco dependence due to additives. Relevant scientific literature is summarized and criteria and experimental studies that can define increased dependence of tobacco products are described. Conclusions: Natural tobacco smoke is a very complex matrix of components, therefore analysis of the contribution of an additive or a combination of additives to the level of dependence on this product is challenging. We propose to combine different type of studies analyzing overall tobacco product dependence potential and the functioning of additives in relation to nicotine. By using a combination of techniques, changes associated with nicotine dependence such as behavioral, physiological, and neurochemical alterations can be examined to provide sufficient information. Research needs and knowledge gaps will be discussed and recommendations will be made to translate current knowledge into legislation. As such, this article aids in implementation of the Tobacco Product Directive, as well as help enable regulators and researchers worldwide to develop standards to reduce dependence on tobacco products. Implications: This article provides an overall view on how to assess tobacco product constituents for their potential contribution to use and dependence. It provides guidelines that help enable regulators worldwide to

Co-occurring nonnative woody shrubs have additive and non-additive soil legacies.

PubMed

Kuebbing, Sara E; Patterson, Courtney M; Classen, Aimée T; Simberloff, Daniel

2016-09-01

To maximize limited conservation funds and prioritize management projects that are likely to succeed, accurate assessment of invasive nonnative species impacts is essential. A common challenge to prioritization is a limited knowledge of the difference between the impacts of a single nonnative species compared to the impacts of nonnative species when they co-occur, and in particular predicting when impacts of co-occurring nonnative species will be non-additive. Understanding non-additivity is important for management decisions because the management of only one co-occurring invader will not necessarily lead to a predictable reduction in the impact or growth of the other nonnative plant. Nonnative plants are frequently associated with changes in soil biotic and abiotic characteristics, which lead to plant-soil interactions that influence the performance of other species grown in those soils. Whether co-occurring nonnative plants alter soil properties additively or non-additively relative to their effects on soils when they grow in monoculture is rarely addressed. We use a greenhouse plant-soil feedback experiment to test for non-additive soil impacts of two common invasive nonnative woody shrubs, Lonicera maackii and Ligustrum sinense, in deciduous forests of the southeastern United States. We measured the performance of each nonnative shrub, a native herbaceous community, and a nonnative woody vine in soils conditioned by each shrub singly or together in polyculture. Soils conditioned by both nonnative shrubs had non-additive impacts on native and nonnative performance. Root mass of the native herbaceous community was 1.5 times lower and the root mass of the nonnative L. sinense was 1.8 times higher in soils conditioned by both L. maackii and L. sinense than expected based upon growth in soils conditioned by either shrub singly. This result indicates that when these two nonnative shrubs co-occur, their influence on soils disproportionally favors persistence

Spinal cord grey matter segmentation challenge.

PubMed

Prados, Ferran; Ashburner, John; Blaiotta, Claudia; Brosch, Tom; Carballido-Gamio, Julio; Cardoso, Manuel Jorge; Conrad, Benjamin N; Datta, Esha; Dávid, Gergely; Leener, Benjamin De; Dupont, Sara M; Freund, Patrick; Wheeler-Kingshott, Claudia A M Gandini; Grussu, Francesco; Henry, Roland; Landman, Bennett A; Ljungberg, Emil; Lyttle, Bailey; Ourselin, Sebastien; Papinutto, Nico; Saporito, Salvatore; Schlaeger, Regina; Smith, Seth A; Summers, Paul; Tam, Roger; Yiannakas, Marios C; Zhu, Alyssa; Cohen-Adad, Julien

2017-05-15

An important image processing step in spinal cord magnetic resonance imaging is the ability to reliably and accurately segment grey and white matter for tissue specific analysis. There are several semi- or fully-automated segmentation methods for cervical cord cross-sectional area measurement with an excellent performance close or equal to the manual segmentation. However, grey matter segmentation is still challenging due to small cross-sectional size and shape, and active research is being conducted by several groups around the world in this field. Therefore a grey matter spinal cord segmentation challenge was organised to test different capabilities of various methods using the same multi-centre and multi-vendor dataset acquired with distinct 3D gradient-echo sequences. This challenge aimed to characterize the state-of-the-art in the field as well as identifying new opportunities for future improvements. Six different spinal cord grey matter segmentation methods developed independently by various research groups across the world and their performance were compared to manual segmentation outcomes, the present gold-standard. All algorithms provided good overall results for detecting the grey matter butterfly, albeit with variable performance in certain quality-of-segmentation metrics. The data have been made publicly available and the challenge web site remains open to new submissions. No modifications were introduced to any of the presented methods as a result of this challenge for the purposes of this publication. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

OBESITY: CHALLENGES TO VENTILATORY CONTROL DURING EXERCISE A BRIEF REVIEW

PubMed Central

Babb, Tony G.

2013-01-01

Obesity is a national health issue in the US. Among the many physiological changes induced by obesity, it also presents a unique challenge to ventilatory control during exercise due to increased metabolic demand of moving larger limbs, increased work of breathing due to extra weight on the chest wall, and changes in breathing mechanics. These challenges to ventilatory control in obesity can be inconspicuous or overt among obese adults but for the most part adaptation of ventilatory control during exercise in obesity appears remarkably unnoticed in the majority of obese people. In this brief review, the changes to ventilatory control required for maintaining normal ventilation during exercise will be examined, especially the interaction between respiratory neural drive and ventilation. Also, gaps in our current knowledge will be discussed. PMID:23707540

Effects of in ovo supplementation of probiotics on performance and immunocompetence of broiler chicks to an Eimeria challenge.

PubMed

Pender, C M; Kim, S; Potter, T D; Ritzi, M M; Young, M; Dalloul, R A

2016-11-30

Coccidiosis is regarded as the parasitic disease with the greatest economic impact on the poultry industry due to reduced performance and increased mortality. A study was conducted to investigate the effects of in ovo administration of probiotics on hatchability, performance, immune organ weights, and lesion scores in broiler chicks during a mixed Eimeria infection. At embryonic day 18, 210 eggs were injected with either sterile water or 1×10 6 cfu probiotic bacteria. On day 3 post-hatch, half of the chicks from each treatment group were challenged with a mixed inoculum of Eimeria acervulina, Eimeria maxima and Eimeria tenella. Measurements and tissue samples were taken on day of hatch (DOH) and days 3, 9 and 15. On day 9, 24 birds per treatment were scored for intestinal Eimeria lesions. No differences were seen among groups for hatchability as well as for body weight (BW), BW gain (BWG), or immune organ weights prior to the Eimeria challenge. On day 9, the non-challenged birds with probiotic supplementation had higher BW and BWG than the non-supplemented controls while no differences were seen among the challenged groups. On day 15, probiotic supplemented birds had improved BW compared to the non-supplemented birds as well as increased BWG from day 9 to 15. Bursa weight was not affected by treatment at any time point while spleen weight was greater in supplemented birds on day 15. Birds receiving the probiotic had significantly lower mortality than non-treated birds. Additionally, gross lesion severity was reduced due to probiotic supplementation in all intestinal segments evaluated. These results suggest that in ovo supplementation of probiotics may improve early performance and provide protection against a mixed Eimeria infection.

Challenges of ECG monitoring and ECG interpretation in dialysis units.

PubMed

Poulikakos, Dimitrios; Malik, Marek

Patients on hemodialysis (HD) suffer from high cardiovascular morbidity and mortality due to high rates of coronary artery disease and arrhythmias. Electrocardiography (ECG) is often performed in the dialysis units as part of routine clinical assessment. However, fluid and electrolyte changes have been shown to affect all ECG morphologies and intervals. ECG interpretation thus depends on the time of the recording in relation to the HD session. In addition, arrhythmias during HD are common, and dialysis-related ECG artifacts mimicking arrhythmias have been reported. Studies using advanced ECG analyses have examined the impact of the HD procedure on selected repolarization descriptors and heart rate variability indices. Despite the challenges related to the impact of the fluctuant fluid and electrolyte status on conventional and advanced ECG parameters, further research in ECG monitoring during dialysis has the potential to provide clinically meaningful and practically useful information for diagnostic and risk stratification purposes. Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.

Data Visualization Challenges and Opportunities in User-Oriented Application Development

NASA Astrophysics Data System (ADS)

Pilone, D.; Quinn, P.; Mitchell, A. E.; Baynes, K.; Shum, D.

2015-12-01

This talk introduces the audience to some of the very real challenges associated with visualizing data from disparate data sources as encountered during the development of real world applications. In addition to the fundamental challenges of dealing with the data and imagery, this talk discusses usability problems encountered while trying to provide interactive and user-friendly visualization tools. At the end of this talk the audience will be aware of some of the pitfalls of data visualization along with tools and techniques to help mitigate them. There are many sources of variable resolution visualizations of science data available to application developers including NASA's Global Imagery Browse Services (GIBS), however integrating and leveraging visualizations in modern applications faces a number of challenges, including: - Varying visualized Earth "tile sizes" resulting in challenges merging disparate sources - Multiple visualization frameworks and toolkits with varying strengths and weaknesses - Global composite imagery vs. imagery matching EOSDIS granule distribution - Challenges visualizing geographically overlapping data with different temporal bounds - User interaction with overlapping or collocated data - Complex data boundaries and shapes combined with multi-orbit data and polar projections - Discovering the availability of visualizations and the specific parameters, color palettes, and configurations used to produce them In addition to discussing the challenges and approaches involved in visualizing disparate data, we will discuss solutions and components we'll be making available as open source to encourage reuse and accelerate application development.

Challenging times ahead.

PubMed

While, Alison

2008-07-01

The global economic challenges will not only affect the banks but also healthcare staff and their patients. Indeed, no-one will be unaffected. At this moment community nurses are not being properly reimbursed for the cost of using their cars to deliver care in the home as the price of petrol rises ever higher and older people are counting the cost of ever rising energy and food costs. Additionally there will be less extra money available to fund public services as the government attempts to balance its expenditure against tax receipts without further increasing government debt.

Sustainable Facility Development: Perceived Benefits and Challenges

ERIC Educational Resources Information Center

Stinnett, Brad; Gibson, Fred

2016-01-01

Purpose: The purpose of this paper is to assess the perceived benefits and challenges of implementing sustainable initiatives in collegiate recreational sports facilities. Additionally, this paper intends to contribute to the evolving field of facility sustainability in higher education. Design/methodology/approach The design included qualitative…

75 FR 22159 - Major Portion Prices and Due Date for Additional Royalty Payments on Indian Gas Production in...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-27

... of major portion prices for calendar year 2008. SUMMARY: Final regulations for valuing gas produced from Indian leases, published August 10, 1999, require MMS to determine major portion prices and notify... provides major portion prices for the 12 months of calendar year 2008. DATES: The due date to pay...

Direct-field acoustic testing of a flight system : logistics, challenges, and results.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stasiunas, Eric Carl; Gurule, David Joseph; Babuska, Vit

2010-10-01

Before a spacecraft can be considered for launch, it must first survive environmental testing that simulates the launch environment. Typically, these simulations include vibration testing performed using an electro-dynamic shaker. For some spacecraft however, acoustic excitation may provide a more severe loading environment than base shaker excitation. Because this was the case for a Sandia Flight System, it was necessary to perform an acoustic test prior to launch in order to verify survival due to an acoustic environment. Typically, acoustic tests are performed in acoustic chambers, but because of scheduling, transportation, and cleanliness concerns, this was not possible. Instead, themore » test was performed as a direct field acoustic test (DFAT). This type of test consists of surrounding a test article with a wall of speakers and controlling the acoustic input using control microphones placed around the test item, with a closed-loop control system. Obtaining the desired acoustic input environment - proto-flight random noise input with an overall sound pressure level (OASPL) of 146.7 dB-with this technique presented a challenge due to several factors. An acoustic profile with this high OASPL had not knowingly been obtained using the DFAT technique prior to this test. In addition, the test was performed in a high-bay, where floor space and existing equipment constrained the speaker circle diameter. And finally, the Flight System had to be tested without contamination of the unit, which required a contamination bag enclosure of the test unit. This paper describes in detail the logistics, challenges, and results encountered while performing a high-OASPL, direct-field acoustic test on a contamination-sensitive Flight System in a high-bay environment.« less

FOOD-DEPENDENT EXERCISE-INDUCED ANAPHYLAXIS DUE TO INGESTION OF MIKAN (CITRUS UNSHIU).

PubMed

Tanaka, Yutaka; Sugihara, Marie; Tsumagari, Shuntaro; Takamatsu, Nobue; Kurihara, Kazuyuki

A 12-year-old girl was referred to our hospital owing to repeated anaphylactic reactions induced by exercise after meals. Food-dependent exercise-induced anaphylaxis (FDEIAn) was suspected. However, sequential tests of typical foods, including egg, milk, soy, and wheat, in combination with exercise, were all negative.The results of the skin prick test (SPT) for Citrus unshiu and specific IgE test for orange and grapefruit were positive. Although no symptoms were noted after an exercise challenge combined with the ingestion of only Citrus unshiu, an anaphylactic reaction was induced by additional acetyl-salicylic acid. From these results, she was diagnosed with FDEIAn due to the ingestion of Citrus unshiu. Because the SPT results for other citrus fruits (including orange, grapefruit, lemon, yuzu, sudachi, ponkan, and iyokan) were all positive, it was suggested that these fruits demonstrate cross-reactivity with each other. Since the girl eliminated citrus fruits from her diet, she has not developed any anaphylactic symptoms. Citrus fruits are not known to cause FDEIAn, but the findings of this case suggest that it is necessary to recognize them as a causative allergen of FDEIAn.

Active mineral additives of sapropel ashes

NASA Astrophysics Data System (ADS)

Khomich, V. A.; Danilina, E. V.; Krivonos, O. I.; Plaksin, G. V.

2015-01-01

The goal of the presented research is to establish a scientific rational for the possibility of sapropel ashes usage as an active mineral additive. The research included the study of producing active mineral additives from sapropels by their thermal treatment at 850900 °C and afterpowdering, the investigation of the properties of paste matrix with an ash additive, and the study of the ash influence on the cement bonding agent. Thermogravimetric analysis and X-ray investigations allowed us to establish that while burning, organic substances are removed, clay minerals are dehydrated and their structure is broken. Sapropel ashes chemical composition was determined. An amorphous ash constituent is mainly formed from silica of the mineral sapropel part and alumosilicagels resulted from clay minerals decomposition. Properties of PC 400 and PC 500A0 sparopel ash additives were studied. Adding ashes containing Glenium plasticizer to the cement increases paste matrix strength and considerably reduces its water absorption. X-ray phase analysis data shows changes in the phase composition of the paste matrix with an ash additive. Ash additives produce a pozzolanic effect on the cement bonding agent. Besides, an ash additive due to the alumosilicagels content causes transformation from unstable calcium aluminate forms to the stable ones.

Differential growth and yield by canola (Brassica napus L.) and wheat (Triticum aestivum L.) arising from alterations in chemical properties of sandy soils due to additions of fly ash.

PubMed

Yunusa, Isa A M; Manoharan, Veeragathipillai; Harris, Rob; Lawrie, Roy; Pal, Yash; Quiton, Jonathan T; Bell, Richard; Eamus, Derek

2013-03-30

There is a need for field trials on testing agronomic potential of coal fly ash to engender routine use of this technology. Two field trials were undertaken with alkaline and acidic fly ashes supplied at between 3 and 6 Mg ha⁻¹ to acidic soils and sown to wheat and canola at Richmond (Eastern Australia) and to wheat only at Merredin (Western Australia). Ash addition marginally (P< 0.10) raised the pH in the top soil layers at both sites. The exceptionally dry season at both sites constrained yields and thwarted any likelihood of gaining yield benefits from ash-induced improvements in soil conditions. Yield improvements due to ash addition were absent at Merredin and only marginal at Richmond, where no elevated accumulation of B, Mo, Se, P or S in either the straw or seeds of wheat was observed; canola increased accumulation of Mo and Se in its shoot with acidic fly ash, but it was well below phyto toxic levels. Simulations of wheat using APSIM at Richmond over a 100-year period (1909-2008) predicted yield increases in 52% of years with addition of ash at 3.0 Mg ha⁻¹ compared with 24% of years with addition of ash at 6.0 Mg ha⁻¹. The simulated yield increases did not exceed 40% over the control with addition of 6 Mg ha⁻¹ ash, but was between 40% and 50% with an addition rate of 3 Mg ha⁻¹. We found no evidence of phytotoxicity in either crop in this unusually dry year and there is still a need for further field assessment in years with favourable rainfall to enable development of clear recommendations on fly ash rates for optimum yield benefits. © 2012 Society of Chemical Industry.

Oral antibody to interleukin-10 reduces growth rate depression due to Eimeria spp. infection in broiler chickens.

PubMed

Sand, Jordan M; Arendt, Maria K; Repasy, Alec; Deniz, Gűlay; Cook, Mark E

2016-02-01

Eimeria spp. must be controlled in floor-reared poultry to prevent the onset of coccidiosis. Here we use an oral antibody to chicken IL-10 to prevent growth depression due to Eimeria spp. infection. Egg antibody directed against an antigenic peptide of IL-10 was produced in laying hens and measured using an ELISA. In the first experiment, egg yolk powder containing antibody to chicken IL-10 (vlpramqt conjugate) (anti-IL-10 yolk powder) was fed at 3.4 g/kg feed to determine growth response following mixed Eimeria spp. challenge. Chicks were fed either anti-IL-10 antibodies or control antibodies and challenged (d3) with either sterile saline or a 10× attenuated Eimeria spp. vaccine. Control-fed and Eimeria-challenged chicks grew 8.8% slower than those challenged with saline (P < 0.04), whereas anti-IL-10-fed Eimeria challenged chicks were not different from untreated controls. In the second trial a dose response was performed with doses of either 0 (control antibody), 0.34-, or 3.4-g anti-IL-10 yolk powder/kg feed. Control-fed, Eimeria-challenged chicks grew 10.6% slower than control saline-challenged chicks (P < 0.05); however, anti-IL-10-fed chicks fed either dose of anti-IL-10 were not different from saline-challenged chicks. Finally, the effect of anti-IL-10 on acquired immunity was investigated. Chicks were fed control or anti-IL-10 yolk powder and vaccinated with a 1× dose of Eimeria vaccine at d 3. After 14 d, antibody was removed from the diet. Chicks were either saline or 10× Eimeria challenged at d 17. We found that the anti-IL-10-fed chickens did not show a reduction in growth due to challenge; hence anti-IL-10 does not appear to affect adaptive immunity during the primary immunization. Overall, use of an antibody to IL-10 is a novel method in preventing adverse effects of Eimeria spp. infection in poultry. © 2016 Poultry Science Association Inc.

Security surveillance challenges and proven thermal imaging capabilities in real-world applications

NASA Astrophysics Data System (ADS)

Francisco, Glen L.; Roberts, Sharon

2004-09-01

Uncooled thermal imaging was first introduced to the public in early 1980's by Raytheon (legacy Texas Instruments Defense Segment Electronics Group) as a solution for military applications. Since the introduction of this technology, Raytheon has remained the leader in this market as well as introduced commercial versions of thermal imaging products specifically designed for security, law enforcement, fire fighting, automotive and industrial uses. Today, low cost thermal imaging for commercial use in security applications is a reality. Organizations of all types have begun to understand the advantages of using thermal imaging as a means to solve common surveillance problems where other popular technologies fall short. Thermal imaging has proven to be a successful solution for common security needs such as: ¸ vision at night where lighting is undesired and 24x7 surveillance is needed ¸ surveillance over waterways, lakes and ports where water and lighting options are impractical ¸ surveillance through challenging weather conditions where other technologies will be challenged by atmospheric particulates ¸ low maintenance requirements due to remote or difficult locations ¸ low cost over life of product Thermal imaging is now a common addition to the integrated security package. Companies are relying on thermal imaging for specific applications where no other technology can perform.

Using Telemetry Data to Refine Endpoints for New Zealand White Rabbits Challenged with Bacillus anthracis.

PubMed

Dawson, David G; Bower, Kristin A; Burnette, Candace N; Holt, Rebecca K; Swearengen, James R; Dabisch, Paul A; Scorpio, Angelo

2017-11-01

We used a continuous-monitoring digital telemetry system to investigate temperature response in New Zealand White rabbits after inhalation or subcutaneous challenge with Bacillus anthracis. Two spore preparations of B. anthracis Ames A2084 were evaluated by using a nose-only inhalation model, and 2 strains, B. anthracis Ames A2084 and B. anthracis UT500, were evaluated in a subcutaneous model. Animal body temperature greater than 3 SD above the mean baseline temperature was considered a significant increase in body temperature (SIBT). All rabbits that exhibited SIBT after challenge by either route of infection or bacterial strain eventually died or were euthanized due to infection, and all rabbits that died or were euthanized due to infection exhibited SIBT during the course of disease. The time at onset of SIBT preceded clinical signs of disease in 94% of the rabbits tested by as long as 2 days. In addition, continuous temperature monitoring facilitated discrimination between the 2 B. anthracis strains with regard to the time interval between SIBT and death. These data suggest that for the New Zealand White rabbit anthrax model, SIBT is a reliable indicator of infection, is predictive of experimental outcome in the absence of treatment, and is measurable prior to the appearance of more severe signs of disease. The use of digital telemetry to monitor infectious disease course in animal models of anthrax can potentially be used in conjunction with other clinical score metrics to refine endpoint euthanasia criteria.

Speech, language, and reading skills in 10-year-old children with palatal clefts: The impact of additional conditions.

PubMed

Feragen, Kristin Billaud; Aukner, Ragnhild; Særvold, Tone K; Hide, Øydis

2017-03-01

This study examined speech (hypernasality and intelligibility), language, and reading skills in children with a cleft palate, specifically investigating additional conditions to the cleft, in order to differentiate challenges related to a cleft only, and challenges associated with an additional condition. Cross-sectional data collected during routine assessments of speech and language in a centralised treatment setting. Children born with cleft with palatal involvement from four birth cohorts (n=184), aged 10. Speech: SVANTE-N; Language: Language 6-16; Reading: Word Chain Test and Reading Comprehension Test. Descriptive analyses revealed that 123 of the children had a cleft only (66.8%), while 61 children (33.2%) had a cleft that was associated with an additional condition (syndrome, developmental difficulty, attentional difficulties). Due to close associations with the outcome variables, children with specific language impairments and dyslexia were excluded from the sample (n=14). In the total cleft sample, 33.1% had mild to severe hypernasality, and 27.9% had mild to severe intelligibility deviances. Most children with intelligibility and hypernasality scores within the normal range had a cleft without any other condition. A high number of children with developmental difficulties (63.2%) or AD/HD (45.5%) had problems with intelligibility. Hypernasality scores were also associated with developmental difficulties (58.8%), whereas most children with AD/HD had normal hypernasality scores (83.3%). As could be expected, results demonstrated that children with a cleft and an additional condition had language and reading scores below average. Children with a cleft only had language and reading scores within the normal range. Among the children with scores below average, 33.3-44.7% had no other conditions explaining difficulties with language and reading. The findings highlight the need for routine assessments of language and reading skills, in addition to assessments of

The role of the dopaminergic system in mood, motivation and cognition in Parkinson's disease: a double blind randomized placebo-controlled experimental challenge with pramipexole and methylphenidate.

PubMed

Drijgers, Rosa L; Verhey, Frans R J; Tissingh, Gerrit; van Domburg, Peter H M F; Aalten, Pauline; Leentjens, Albert F G

2012-09-15

In Parkinson's disease (PD) reduced dopaminergic activity in the mesocorticolimbic pathway is implied in the pathophysiology of several non-motor symptoms related to mood, motivation and cognition. Insight in the pathophysiology of these syndromes may pave the way for more rational treatments. In a double-blind, randomized, placebo controlled, crossover design with three arms, we studied the effects of a direct dopaminergic challenge with the dopamine 2 receptor agonist pramipexole, an indirect challenge with the dopamine reuptake inhibitor methylphenidate, and placebo on measures of mood, motivation and cognition in 23 agonist-naïve PD patients and 23 healthy controls. Acute challenge with pramipexole had a negative effect on mood and fatigue in both patients and controls. In addition, challenge with pramipexole led to increased anger, fatigue, vigor and tension in healthy control subjects, but not in PD patients. Challenge with methylphenidate had a positive effect on anhedonia and vigor in PD patients. Due to its side effects after a single administration, pramipexole is probably less suitable for acute challenge studies. The acute effects of a methylphenidate challenge on anhedonia and vigor in PD patients make this drug an interesting choice for further studies of the treatment of mood and motivational disorders in this population. Copyright © 2012 Elsevier B.V. All rights reserved.

NASA Space Rocket Logistics Challenges

NASA Technical Reports Server (NTRS)

Neeley, James R.; Jones, James V.; Watson, Michael D.; Bramon, Christopher J.; Inman, Sharon K.; Tuttle, Loraine

2014-01-01

The Space Launch System (SLS) is the new NASA heavy lift launch vehicle and is scheduled for its first mission in 2017. The goal of the first mission, which will be uncrewed, is to demonstrate the integrated system performance of the SLS rocket and spacecraft before a crewed flight in 2021. SLS has many of the same logistics challenges as any other large scale program. Common logistics concerns for SLS include integration of discreet programs geographically separated, multiple prime contractors with distinct and different goals, schedule pressures and funding constraints. However, SLS also faces unique challenges. The new program is a confluence of new hardware and heritage, with heritage hardware constituting seventy-five percent of the program. This unique approach to design makes logistics concerns such as commonality especially problematic. Additionally, a very low manifest rate of one flight every four years makes logistics comparatively expensive. That, along with the SLS architecture being developed using a block upgrade evolutionary approach, exacerbates long-range planning for supportability considerations. These common and unique logistics challenges must be clearly identified and tackled to allow SLS to have a successful program. This paper will address the common and unique challenges facing the SLS programs, along with the analysis and decisions the NASA Logistics engineers are making to mitigate the threats posed by each.

Protection of Renewable-dominated Microgrids: Challenges and Potential Solutions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elkhatib, Mohamed; Ellis, Abraham; Milan Biswal

due to faults can be confused with transients due to other events such as capacitor switching. Additionally, while detecting faults by analyzing transients could be doable, locating faults based on analyzing transients is still an open question.« less

Challenges in the 1990's for astronaut training simulators

NASA Technical Reports Server (NTRS)

Brown, Patrick M.; Hajare, Ankur R.; Stark, George E.

1990-01-01

New challenges for the simulation community at the Johnson Space Center both in near and long terms are considered. In the near term, the challenges of supporting an increasing flight rate, maintaining operations while replacing obsolete subsystems, and incorporating forthcoming changes to the Space Shuttle are discussed, and focus is placed on a change of forward flight-deck instruments from electro-mechanical devices to electronic displays. Training astronauts for complex concurrent missions involving multiple spacecraft and geographically dispersed ground facilities is considered to be foremost of the long-term challenges, in addition to the tasks of improving the simulator reliability and the operational efficiency of the facilities.

Print quality challenges for the next decade

NASA Astrophysics Data System (ADS)

Meyer, John D.

1990-07-01

The decade of the eighties has seen a remarkable transformation in the performance and capabilities of shared and personal printers. Dramatic gains have been made in four key areas: cost, throughput, reliability and most significantly, print quality. The improvements in text print quality due to algorithmic fonts and increased resolution have been pivotal in the creation of the desktop publishing market. Electronic pre-press systems now include hardware to receive Postscript files accompanied by color originals for scanning and separation. These systems have application in the commercial printing of a wide variety of material e.g. books, magazines, brochures, newspapers. The vision of the future of hardcopy now embraces the full spectrum from typeset text to full color reproduction of natural images due to the advent of grayscale and color capability in printer technology. This will place increased demands for improvements in print quality, particularly in the use of grayscale and color. This paper gives an overview of the challenges which must be met and discusses data communication standards and print quality measurement techniques as a means of meeting these challenges for both color and black and white output.

Additivity vs Synergism: Investigation of the Additive Interaction of Cinnamon Bark Oil and Meropenem in Combinatory Therapy.

PubMed

Yang, Shun-Kai; Yusoff, Khatijah; Mai, Chun-Wai; Lim, Wei-Meng; Yap, Wai-Sum; Lim, Swee-Hua Erin; Lai, Kok-Song

2017-11-04

Combinatory therapies have been commonly applied in the clinical setting to tackle multi-drug resistant bacterial infections and these have frequently proven to be effective. Specifically, combinatory therapies resulting in synergistic interactions between antibiotics and adjuvant have been the main focus due to their effectiveness, sidelining the effects of additivity, which also lowers the minimal effective dosage of either antimicrobial agent. Thus, this study was undertaken to look at the effects of additivity between essential oils and antibiotic, via the use of cinnamon bark essential oil (CBO) and meropenem as a model for additivity. Comparisons between synergistic and additive interaction of CBO were performed in terms of the ability of CBO to disrupt bacterial membrane, via zeta potential measurement, outer membrane permeability assay and scanning electron microscopy. It has been found that the additivity interaction between CBO and meropenem showed similar membrane disruption ability when compared to those synergistic combinations which was previously reported. Hence, results based on our studies strongly suggest that additive interaction acts on a par with synergistic interaction. Therefore, further investigation in additive interaction between antibiotics and adjuvant should be performed for a more in depth understanding of the mechanism and the impacts of such interaction.

Obesity: challenges to ventilatory control during exercise--a brief review.

PubMed

Babb, Tony G

2013-11-01

Obesity is a national health issue in the US. Among the many physiological changes induced by obesity, it also presents a unique challenge to ventilatory control during exercise due to increased metabolic demand of moving larger limbs, increased work of breathing due to extra weight on the chest wall, and changes in breathing mechanics. These challenges to ventilatory control in obesity can be inconspicuous or overt among obese adults but for the most part adaptation of ventilatory control during exercise in obesity appears remarkably unnoticed in the majority of obese people. In this brief review, the changes to ventilatory control required for maintaining normal ventilation during exercise will be examined, especially the interaction between respiratory neural drive and ventilation. Also, gaps in our current knowledge will be discussed. Copyright © 2013 Elsevier B.V. All rights reserved.

Effects of additional oxazepam in long-term users of oxazepam.

PubMed

Voshaar, Richard C Oude; Verkes, Robbert-Jan; van Luijtelaar, Gilles L J M; Edelbroek, Peter M; Zitman, Frans G

2005-02-01

Although additional dosages of benzodiazepines in long-term users of benzodiazepines are common, it is unknown whether these additional dosages resort any effect. The effects of an additional 20-mg dosage oxazepam were assessed in a double-blind, balanced-order, crossover randomized study comparing 16 long-term users of oxazepam (patients) with 18 benzodiazepine-naive controls (controls). The effects of 10 and 30 mg oxazepam were assessed at pretest and 2.5 hours after drug administration on: (a) saccadic eye movements as proxy for the sedative effect, (b) acoustic startle response (ASR) as proxy for the anxiolytic effects, (c) memory, (d) reaction time tasks, and (e) subjective measurements. Dose-related effects were found in patients on the peak velocity of saccadic eye movement and on response probability, respectively peak amplitude of the ASR. Comparison with controls, however, suggests that in patients the sedative effects might be mixed up with suppression of sedative withdrawal symptoms, whereas patients were as sensitive as benzodiazepine-naive controls for the effects of an additional dosage on the ASR. Neither 10 nor 30 mg oxazepam challenge affected the reaction time tasks in patients, whereas controls show a dose-related impairment. The memory impairing effects, however, did not differ significantly between patients and controls. In contrast to controls, patients could not discriminate between a 10- and 30-mg dosage as assessed by visual analogue scales and the STAI-DY-1, which might indicate a placebo effect in the 10-mg challenge in patients. We conclude that additional dosages of oxazepam still exert pronounced effects after daily use for more than 10 years.

Food additives and preschool children.

PubMed

Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

2013-02-01

Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

Challenges of Global Change for Lakes

NASA Astrophysics Data System (ADS)

Seekell, D.

2016-12-01

Lakes comprise a tiny fraction of Earth's surface, but contribute significantly to human life and wellbeing. Many lakes are disappearing due to climate change and water diversions, and there are widespread disruptions to ecosystem processes due to human influences. For example, pollution by nutrients and toxic chemicals causes toxicity to humans, livestock, fish, and wildlife. Lake desiccation reduces economic opportunity and food security, displacing entire communities. Understanding these changes at the global scale, and their implications for human societies, are a key challenges for aquatic scientists. In this talk, I will use results from my research to highlight some of the key uncertainties related to global change and lakes, as well as recent developments by aquatic scientists aimed at predicting, mitigating, and coping with these changes.

Feature based Weld-Deposition for Additive Manufacturing of Complex Shapes

NASA Astrophysics Data System (ADS)

Panchagnula, Jayaprakash Sharma; Simhambhatla, Suryakumar

2018-06-01

Fabricating functional metal parts using Additive Manufacturing (AM) is a leading trend. However, realizing overhanging features has been a challenge due to the lack of support mechanism for metals. Powder-bed fusion techniques like, Selective Laser Sintering (SLS) employ easily-breakable-scaffolds made of the same material to realize the overhangs. However, the same approach is not extendible to deposition processes like laser or arc based direct energy deposition processes. Although it is possible to realize small overhangs by exploiting the inherent overhanging capability of the process or by blinding some small features like holes, the same cannot be extended for more complex geometries. The current work presents a novel approach for realizing complex overhanging features without the need of support structures. This is possible by using higher order kinematics and suitably aligning the overhang with the deposition direction. Feature based non-uniform slicing and non-uniform area-filling are some vital concepts required in realizing the same and are briefly discussed here. This method can be used to fabricate and/or repair fully dense and functional components for various engineering applications. Although this approach has been implemented for weld-deposition based system, the same can be extended to any other direct energy deposition processes also.

The Novice Principal: Change and Challenges

ERIC Educational Resources Information Center

Northfield, Shawn

2013-01-01

Rachel Wilson is a novice principal and new school leader of a large English junior-senior high school located in a rural township of a maritime province in Canada. Upon her appointment, she was challenged with having to establish herself as a credible leadership choice for the venue in addition to having to engage in new role learning as a…

Examining the Challenges of Learner-Centered Education

ERIC Educational Resources Information Center

Aslan, Sinem; Reigeluth, Charles M.

2016-01-01

Learner-centered education has been touted as an improvement over teacher-centered educational systems. However, educators and researchers need to be cautious about its problems, in addition to considering its benefits. The authors set out to identify challenges to learner-centered education through the eyes of educators in a truly…

Challenges in pediatric chronic inflammatory demyelinating polyneuropathy.

PubMed

Haliloğlu, Göknur; Yüksel, Deniz; Temoçin, Cağri Mesut; Topaloğlu, Haluk

2016-12-01

Chronic inflammatory demyelinating neuropathy, a treatable immune-mediated disease of the peripheral nervous system is less common in childhood compared to adults. Despite different sets of diagnostic criteria, lack of a reliable biologic marker leads to challenges in diagnosis, follow-up and treatment. Our first aim was to review clinical presentation, course, response to treatment, and prognosis in our childhood patients. We also aimed to document diagnostic and therapeutic pitfalls and challenges at the bedside. Our original cohort consisted of 23 pediatric patients who were referred to us with a clinical diagnosis of chronic inflammatory demyelinating neuropathy. Seven patients reaching to an alternative diagnosis were excluded. In the remaining patients, diagnostic, treatment and follow-up data were compared in typical patients who satisfied both clinical and electrodiagnostic criteria and atypical patients who failed to meet minimal research chronic inflammatory demyelinating neuropathy electrodiagnostic requirements. Eight of 16 patients (50%) met the minimal chronic inflammatory demyelinating neuropathy research diagnostic requirements. There was only a statistically significant difference (p = 0.010) in terms of European Neuromuscular Centre childhood chronic inflammatory diagnostic mandatory clinical criteria between the two groups. Misdiagnosis due to errors in electrophysiological interpretation (100%, n = 8), cerebrospinal fluid cytoalbuminologic dissociation (100%, n = 4 and/or subjective improvement on any immunotherapy modality (80 ± 19.27%)) was frequent. Pediatric CIDP is challenging in terms of diagnostic and therapeutic pitfalls at the bedside. Diagnostic errors due to electrophysiological interpretation, cerebrospinal fluid cytoalbuminologic dissociation, and/or subjective improvement on immunotherapy should be considered. Copyright © 2016 Elsevier B.V. All rights reserved.

Additional Term in the Webb-Pearman-Leuning Correction due to Surface Heating From an Open-Path Gas Analyzer

NASA Astrophysics Data System (ADS)

Burba, G. G.; Anderson, D. J.; Xu, L.; McDermitt, D. K.

2006-12-01

One laboratory and two field experiments were conducted between September 2005 and September 2006 to investigate the impact of an added heat flux in the sample path of the LI-7500 CO2/H2O gas analyzer caused by the difference in temperatures between the ambient air and the surface of the instrument. Contribution of heat dissipated from the internal instrument electronics toward the instrument surface was substantial, especially in cold conditions. In the environmental chamber, surface heating ranged from about 0 °C above ambient, at air temperatures above +40 °C, to about 7 °C, at an air temperature of -25 °C. In the field, daytime temperature differences were overall smaller than in the chamber due to convective cooling by the wind and some long-wave cooling, despite the added sunlight contribution. However, considerable temperature gradients (up to 2 °C per 1mm) were still observed over the lower window of the LI-7500, suggesting strong sensible heat fluxes above the instrument surface. The nighttime situation was different due to strong long-wave cooling of some parts of the instrument, partially (and sometimes, fully) offsetting effects of the electronics heating in the other parts. The concept of an added heat flux term in the Web-Pearman-Leuning correction is revisited, and effect of the instrument surface heating on the CO2 flux measurements is examined. The proposed concept is presented in detail, along with resulted corrections to the originally computed flux. Field data are examined separately for daytime and nighttime cases, and on hourly and seasonal time scales. Significant reduction in the apparent CO2 uptake during off-season periods was observed as a result of applying correction due to the added heat, while fluxes during the growing season have not been noticeably affected. The correction also resulted in the elimination of most of the wrong signs from the off-season open- path CO2 fluxes, in considerable reduction in variability of the data

Acute kidney injury due to tropical infectious diseases and animal venoms: a tale of 2 continents.

PubMed

Burdmann, Emmanuel A; Jha, Vivekanand

2017-05-01

South and Southeast Asia and Latin American together comprise 46 countries and are home to approximately 40% of the world population. The sociopolitical and economic heterogeneity, tropical climate, and malady transitions characteristic of the region strongly influence disease behavior and health care delivery. Acute kidney injury epidemiology mirrors these inequalities. In addition to hospital-acquired acute kidney injury in tertiary care centers, these countries face a large preventable burden of community-acquired acute kidney injury secondary to tropical infectious diseases or animal venoms, affecting previously healthy young individuals. This article reviews the epidemiology, clinical picture, prevention, risk factors, and pathophysiology of acute kidney injury associated with tropical diseases (malaria, dengue, leptospirosis, scrub typhus, and yellow fever) and animal venom (snakes, bees, caterpillars, spiders, and scorpions) in tropical regions of Asia and Latin America, and discusses the potential future challenges due to emerging issues. Copyright © 2016 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

Effects of additional data on Bayesian clustering.

PubMed

Yamazaki, Keisuke

2017-10-01

Hierarchical probabilistic models, such as mixture models, are used for cluster analysis. These models have two types of variables: observable and latent. In cluster analysis, the latent variable is estimated, and it is expected that additional information will improve the accuracy of the estimation of the latent variable. Many proposed learning methods are able to use additional data; these include semi-supervised learning and transfer learning. However, from a statistical point of view, a complex probabilistic model that encompasses both the initial and additional data might be less accurate due to having a higher-dimensional parameter. The present paper presents a theoretical analysis of the accuracy of such a model and clarifies which factor has the greatest effect on its accuracy, the advantages of obtaining additional data, and the disadvantages of increasing the complexity. Copyright © 2017 Elsevier Ltd. All rights reserved.

24 CFR 235.1218 - Additional eligibility requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Additional eligibility requirements... interest due and delinquent interest not to exceed two months; and (2) The original principal amount of the... based on the closing price for three-month forward delivery contracts closest to par but not exceeding...

Challenges facing the development of the Arabic chatbot

NASA Astrophysics Data System (ADS)

AlHagbani, Eman Saad; Khan, Muhammad Badruddin

2016-07-01

The future information systems are expected to be more intelligent and will take human queries in natural language as input and answer them promptly. To develop a chatbot or a computer program that can chat with humans in realistic manner to extent that human get impressions that he/she is talking with other human is a challenging task. To make such chatbots, different technologies will work together ranging from artificial intelligence to development of semantic resources. Sophisticated chatbots are developed to perform conversation in number of languages. Arabic chatbots can be helpful in automating many operations and serve people who only know Arabic language. However, the technology for Arabic language is still in its infancy stage due to some challenges surrounding the Arabic language. This paper offers an overview of the chatbot application and the several obstacles and challenges that need to be resolved to develop an effective Arabic chatbot.

International and cross-cultural issues: six key challenges for our professions.

PubMed

Marshall, Julie

2003-01-01

This paper discusses a number of key challenges facing professionals who work with people who have communication disabilities. The challenges are related to working internationally and in a cross-culturally competent way. Each challenge is discussed, drawing on material from a range of sources, including the papers in the final 2003 edition of FOLIA PHONIATRICA ET LOGOPAEDICA ('International and Cross-Cultural Issues'). The challenges discussed cover how experiences from majority world countries can be used to benefit services elsewhere, 'mainstreaming' commitment to cross-cultural competence, learning from relationships with other professionals, influencing research practice, responding to requests to work internationally and finally, dealing with cultural differences that challenge working practices. Some solutions are suggested and additional questions posed. Copyright 2003 S. Karger AG, Basel

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Members of team Mountaineers pose with officials from the 2014 NASA Centennial Challenges Sample Return Robot Challenge on Saturday, June 14, 2014 at Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team Mountaineer was the only team to complete the level one challenge this year. Team Mountaineer members, from left (in blue shirts) are: Ryan Watson, Marvin Cheng, Scott Harper, Jarred Strader, Lucas Behrens, Yu Gu, Tanmay Mandal, Alexander Hypes, and Nick Ohi Challenge judges and competition staff (in white and green polo shirts) from left are: Sam Ortega, NASA Centennial Challenge program manager; Ken Stafford, challenge technical advisor, WPI; Colleen Shaver, challenge event manager, WPI. During the competition, teams were required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge was to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

The Challenge of Fulfilling a Perplexing Space Weather User Requirement

NASA Astrophysics Data System (ADS)

Kunches, J. M.; Boteler, D.; Wang, H.

2006-12-01

To fly commercial aircraft over the poles, it is necessary to ensure that air-ground and air-air communications be maintained throughout the flight. Some U. S. carriers have requested a seven hour lead-time for predictions of HF outages, the primary communication means for flying over the pole. This very difficult-to-meet specification results from the necessity to make alternative fueling arrangements, schedule additional flight crews, modify the loading of the aircraft, etc., to minimize the costs due to redirecting aircraft away from the optimal polar route. To satisfy this stringent requirement, better predictions of solar energetic particle (SEPs) events are necessary. Even soft SEPs can cause HF outages lasting for hours. This requirement challenges the international science community to significantly improve current predictive methodologies. Presently, a 1-2 hour lead-time may be the longest that can be obtained with a reasonable false alarm rate. Globally, there are a number of new programs, organized under the auspices of the International Space Environment Service (ISES), to facilitate progress in meeting the airlines' requirement. The Regional Warning Center in Canada is implementing a network of riometers at high latitudes, so to detect ionospheric conditions that result in HF outages. This chain is now being deployed. The Regional Warning Centers in Russia, China, the United States and Japan are working with the Canadians, to acquire and make available, other real-time data relevant to the problem. These data include solar, interplanetary, geomagnetic and ionospheric data. Clearly this challenge spans the realm of space science, from the solar and galactic origins of energetic particles, to the D-Region of Earth's ionosphere. The presentation will lay out a roadmap for an iterative solution to the prediction challenge, and identify some of the key areas to be addressed.

Multicore Programming Challenges

NASA Astrophysics Data System (ADS)

Perrone, Michael

The computer industry is facing fundamental challenges that are driving a major change in the design of computer processors. Due to restrictions imposed by quantum physics, one historical path to higher computer processor performance - by increased clock frequency - has come to an end. Increasing clock frequency now leads to power consumption costs that are too high to justify. As a result, we have seen in recent years that the processor frequencies have peaked and are receding from their high point. At the same time, competitive market conditions are giving business advantage to those companies that can field new streaming applications, handle larger data sets, and update their models to market conditions faster. The desire for newer, faster and larger is driving continued demand for higher computer performance.

Additional boundary conditions and surface exciton dispersion relations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rimbey, P.R.

1977-01-15

The surface-exciton dispersion curves in ZnO are derived from the surface impedances developed by Fuchs and Kliewer (FK) and Rimbey and Mahan (RM) including retardation. There exists a distinctive splitting between the two dispersions, the FK additional boundary conditions having longitudinal character, the RM additional boundary conditions being transverse. Surface-mode attenuation due to spatial dispersion is more pronouced in the RM formalism, although inclusion of a phenomenological damping parameter does not alter either dispersion curve. (AIP)

Low-Temperature Additive Performance in Jet A Fuels

DTIC Science & Technology

2013-04-01

coking issues for the U-2 aircraft while still retaining the required low temperature flow improvement. For the Global Hawk a lower optimum ...employ the additive at the lower concentration (2,000 mg/L), so the failure at 4,000 mg/L should not be a problem . Fuel POSF-3602 shows a JFTOT...combustor, may experience no problems due to the increased fuel viscosity caused by the additive. However, another fuel system that puts less heat into the

Grain Structure Control of Additively Manufactured Metallic Materials

PubMed Central

Faierson, Eric J.

2017-01-01

Grain structure control is challenging for metal additive manufacturing (AM). Grain structure optimization requires the control of grain morphology with grain size refinement, which can improve the mechanical properties of additive manufactured components. This work summarizes methods to promote fine equiaxed grains in both the additive manufacturing process and subsequent heat treatment. Influences of temperature gradient, solidification velocity and alloy composition on grain morphology are discussed. Equiaxed solidification is greatly promoted by introducing a high density of heterogeneous nucleation sites via powder rate control in the direct energy deposition (DED) technique or powder surface treatment for powder-bed techniques. Grain growth/coarsening during post-processing heat treatment can be restricted by presence of nano-scale oxide particles formed in-situ during AM. Grain refinement of martensitic steels can also be achieved by cyclic austenitizing in post-processing heat treatment. Evidently, new alloy powder design is another sustainable method enhancing the capability of AM for high-performance components with desirable microstructures.

Nanotechnology: Opportunities and Challenges

NASA Technical Reports Server (NTRS)

Meyyappan, Meyya

2003-01-01

Nanotechnology seeks to exploit novel physical, chemical, biological, mechanical, electrical, and other properties, which arise primarily due to the nanoscale nature of certain materials. A key example is carbon nanotubes (CNTs) which exhibit unique electrical and extraordinary mechanical properties and offer remarkable potential for revolutionary applications in electronics devices, computing, and data storage technology, sensors, composites, nanoelectromechanical systems (NEMS), and as tip in scanning probe microscopy (SPM) for imaging and nanolithography. Thus the CNT synthesis, characterization, and applications touch upon all disciplines of science and engineering. This presentation will provide an overview and progress report on this and other major research candidates in Nanotechnology and address opportunities and challenges ahead.

Prevention of Infection Due to Clostridium difficile.

PubMed

Cooper, Christopher C; Jump, Robin L P; Chopra, Teena

2016-12-01

Clostridium difficile is one of the foremost nosocomial pathogens. Preventing infection is particularly challenging. Effective prevention efforts typically require a multifaceted bundled approach. A variety of infection control procedures may be advantageous, including strict hand decontamination with soap and water, contact precautions, and using chlorine-containing decontamination agents. Additionally, risk factor reduction can help reduce the burden of disease. The risk factor modification is principally accomplished though antibiotic stewardship programs. Unfortunately, most of the current evidence for prevention is in acute care settings. This review focuses on preventative approaches to reduce the incidence of Clostridium difficile infection in healthcare settings. Copyright © 2016 Elsevier Inc. All rights reserved.

Psychosocial challenges facing women living with HIV during the perinatal period in rural Uganda.

PubMed

Ashaba, Scholastic; Kaida, Angela; Coleman, Jessica N; Burns, Bridget F; Dunkley, Emma; O'Neil, Kasey; Kastner, Jasmine; Sanyu, Naomi; Akatukwasa, Cecilia; Bangsberg, David R; Matthews, Lynn T; Psaros, Christina

2017-01-01

The complexities of navigating pregnancy while living with HIV predispose women to additional stress. Finding ways to minimize psychosocial challenges during the perinatal period may maximize the well-being of mothers living with HIV and their children. The goal of this study was to explore psychosocial challenges experienced by women living with HIV (WLWH) during pregnancy and the postpartum. We conducted individual in-depth interviews with 20 WLWH recruited from an HIV treatment cohort study in Mbarara, Uganda as part of a larger study exploring perinatal depression. We conducted content analyses to identify themes related to challenges of WLWH during pregnancy and the postpartum. Participants had a median age of 33 years [IQR: 28-35], a median of 3 living children [IQR: 2-5], and 95% had achieved HIV-RNA suppression. Challenges were organized around the following themes: HIV -related stigma from health professionals, HIV status disclosure dilemma, unintended pregnancy and intimate partner violence, HIV and environmental structural barriers and distress and fear related to maternal and child health. Stigma centered on discrimination by health care professionals and personal shame associated with being pregnant as a WLWH. This led to difficulty engaging in HIV care, particularly when coupled with structural barriers, such as lack of transportation to clinic. Participants experienced intimate partner violence and lacked support from their partners and family members. Distress and fear about the health and uncertainty about the future of the unborn baby due to maternal deteriorating physical health was common. The perinatal period is a time of stress for WLWH. Challenges experienced by WLWH may compromise successful engagement in HIV care and may reduce quality of life for women and their children. Strategies aimed at alleviating the challenges of WLWH should involve the larger structural environment including partners, family and community member as well as policy

Psychosocial challenges facing women living with HIV during the perinatal period in rural Uganda

PubMed Central

Ashaba, Scholastic; Burns, Bridget F.; Dunkley, Emma; O’Neil, Kasey; Kastner, Jasmine; Sanyu, Naomi; Akatukwasa, Cecilia; Bangsberg, David R.

2017-01-01

The complexities of navigating pregnancy while living with HIV predispose women to additional stress. Finding ways to minimize psychosocial challenges during the perinatal period may maximize the well-being of mothers living with HIV and their children. The goal of this study was to explore psychosocial challenges experienced by women living with HIV (WLWH) during pregnancy and the postpartum. We conducted individual in-depth interviews with 20 WLWH recruited from an HIV treatment cohort study in Mbarara, Uganda as part of a larger study exploring perinatal depression. We conducted content analyses to identify themes related to challenges of WLWH during pregnancy and the postpartum. Participants had a median age of 33 years [IQR: 28–35], a median of 3 living children [IQR: 2–5], and 95% had achieved HIV-RNA suppression. Challenges were organized around the following themes: HIV -related stigma from health professionals, HIV status disclosure dilemma, unintended pregnancy and intimate partner violence, HIV and environmental structural barriers and distress and fear related to maternal and child health. Stigma centered on discrimination by health care professionals and personal shame associated with being pregnant as a WLWH. This led to difficulty engaging in HIV care, particularly when coupled with structural barriers, such as lack of transportation to clinic. Participants experienced intimate partner violence and lacked support from their partners and family members. Distress and fear about the health and uncertainty about the future of the unborn baby due to maternal deteriorating physical health was common. The perinatal period is a time of stress for WLWH. Challenges experienced by WLWH may compromise successful engagement in HIV care and may reduce quality of life for women and their children. Strategies aimed at alleviating the challenges of WLWH should involve the larger structural environment including partners, family and community member as well as

The Relationship between Psychiatric Symptomatology and Motivation of Challenging Behaviour: A Preliminary Study

ERIC Educational Resources Information Center

Holden, Borge; Gitlesen, Jens Petter

2008-01-01

In addition to explaining challenging behaviour by way of behaviour analytic, functional analyses, challenging behaviour is increasingly explained by way of psychiatric symptomatology. According to some researchers, the two approaches complement each other, as psychiatric symptomatology may form a motivational basis for the individual's response…

Catalytic enantioselective addition of Grignard reagents to aromatic silyl ketimines

NASA Astrophysics Data System (ADS)

Rong, Jiawei; Collados, Juan F.; Ortiz, Pablo; Jumde, Ravindra P.; Otten, Edwin; Harutyunyan, Syuzanna R.

2016-12-01

α-Chiral amines are of significant importance in medicinal chemistry, asymmetric synthesis and material science, but methods for their efficient synthesis are scarce. In particular, the synthesis of α-chiral amines with the challenging tetrasubstituted carbon stereocentre is a long-standing problem and catalytic asymmetric additions of organometallic reagents to ketimines that would give direct access to these molecules are underdeveloped. Here we report a highly enantioselective catalytic synthesis of N-sulfonyl protected α-chiral silyl amines via the addition of inexpensive, easy to handle and readily available Grignard reagents to silyl ketimines. The key to this success was our ability to suppress any unselective background addition reactions and side reduction pathway, through the identification of an inexpensive, chiral Cu-complex as the catalytically active structure.

Systemic inflammatory responses following welding inhalation challenge test.

PubMed

Kauppi, Paula; Järvelä, Merja; Tuomi, Timo; Luukkonen, Ritva; Lindholm, Tuula; Nieminen, Riina; Moilanen, Eeva; Hannu, Timo

2015-01-01

The aim of this study was to investigate inflammatory and respiratory responses to welding fume exposure in patients with suspected occupational asthma. Sixteen patients referred to the Finnish Institute of Occupational Health underwent mild steel (MS) and stainless steel (SS) welding challenge tests, due to suspicion of OA. Platelet count, leucocytes and their differential count, hemoglobin, sensitive CRP, lipids, glucose and fibrinogen were analyzed in addition to interleukin (IL)-1β, IL-6, IL-8, TNF-α, endothelin-1, and E-selectin in plasma samples. Peak expiratory flow (PEF), forced expiratory volume in 1 min (FEV 1 ) and exhaled nitric oxide (NO) measurements were performed before and after the challenge test. Personal particle exposure was assessed using IOM and a mini sampler. Particle size distribution was measured by an Electric Low Pressure Impactor (ELPI). The number of leukocytes, neutrophils, and platelets increased significantly, and the hemoglobin level and number of erythrocytes decreased significantly after both the MS and SS exposure tests. Five of the patients were diagnosed with OA, and their maximum fall in FEV 1 values was 0.70 l (±0.32) 4 h after SS exposure. MS welding generated an average inhalable particle mass concentration of 31.6, and SS welding of 40.2 mg/m 3 . The mean particle concentration measured inside the welding face shields by the mini sampler was 30.2 mg/m 3 and 41.7 mg/m 3 , respectively. Exposure to MS and SS welding fume resulted in a mild systemic inflammatory response. The particle concentration from the breathing zones correlated with the measurements inside the welding face shields.

Challenges and future direction of molecular research in air pollution-related lung cancers.

PubMed

Shahadin, Maizatul Syafinaz; Ab Mutalib, Nurul Syakima; Latif, Mohd Talib; Greene, Catherine M; Hassan, Tidi

2018-04-01

Hazardous air pollutants or chemical release into the environment by a variety of natural and/or anthropogenic activities may give adverse effects to human health. Air pollutants such as sulphur dioxide (SO2), nitrogen oxides (NOx), carbon monoxide (CO), heavy metals and particulate matter (PM) affect number of different human organs, especially the respiratory system. The International Agency for Research on Cancer (IARC) reported that ambient air pollution is a cause of lung cancer. Recently, the agency has classified outdoor air pollution as well as PM air pollution as Group 1 carcinogens. In addition, several epidemiological studies have shown a positive association between air pollutants to lung cancer risks and mortality. However, there are only a few studies examining the molecular effects of air pollution exposure specifically in lung cancer due to multiple challenges to mimic air pollution exposure in basic experimentation. Another major issue is the lack of adequate adjustments for exposure misclassification as air pollution may differ temporo-spatially and socioeconomically. Thus, the purpose of this paper is to review the current molecular understanding of air pollution-related lung cancer and potential future direction in this challenging yet important research field. Copyright © 2018 Elsevier B.V. All rights reserved.

Health challenges in Africa and the way forward

PubMed Central

Kirigia, Joses Muthuri; Barry, Saidou Pathe

2008-01-01

Africa is confronted by a heavy burden of communicable and non-communicable diseases. Cost-effective interventions that can prevent the disease burden exist but coverage is too low due to health systems weaknesses. This editorial reviews the challenges related to leadership and governance; health workforce; medical products, vaccines and technologies; information; financing; and services delivery. It also provides an overview of the orientations provided by the WHO Regional Committee for Africa for overcoming those challenges. It cautions that it might not be possible to adequately implement those orientations without a concerted fight against corruption, sustained domestic and external investment in social sectors, and enabling macroeconomic and political (i.e. internally secure) environment. PMID:19094201

Effects of Progressive Addition Lens Wear on Digital Work in Pre-presbyopes

PubMed Central

Kee, Chea-su; Leung, Tsz Wing; Kan, Ka-hung; Lam, Christie Hang-I

2018-01-01

SIGNIFICANCE Growing popularity of handheld digital devices imposes significant challenges to our visual system and clinical management. This study aimed to determine the effects of lens design on parameters that may influence the refractive management of pre-presbyopic adult computer users. PURPOSE To determine the effects of wearing conventional single-vision lenses (SVL) versus progressive addition lenses (PAL) on the working distance and refractive status. METHODS Adult computer users, recruited from two age cohorts (18 to 25 years, n = 19; 30 to 40 years, n = 45), were prescribed SVLs and PALs designed for use with handheld digital devices. For each lens type, the working distance and refractive shift (post-task − pre-task) were measured immediately after lens delivery (T0) and after 1 month of lens wear (T1). Working distances were recorded with an automatic ultrasound device while the participants were playing a video game. Refractive status through the subjects' glasses was measured before (pre-task) and after playing the game (post-task). Questionnaires assessing the frequencies of 10 digital work–related visual symptoms were conducted for both lens types at T1. RESULTS Switching from SVL to PAL increased the working distance in both cohorts (mean ± SEM = 1.88 ± 0.60 cm; P = .002) and induced a small but significant positive refractive shift (+0.08 ± 0.04 D, P = .021) in the older cohort at T1. In the younger cohort, the changes in working distance due to the switching lens design were correlated with myopic error (r = +0.66, P = .002). In the older cohort, the changes in refractive shift due to switching lens design were correlated with amplitude of accommodation at both time points (r for T0 and T1 = −0.32 and −0.30, respectively; both P < .05). Progressive addition lens was rated as causing less “increased sensitivity to light” compared with SVL. CONCLUSIONS Switching from SVL to PAL increased the working distance and induced a positive

Expanding the scope of health information systems. Challenges and developments.

PubMed

Kuhn, K A; Wurst, S H R; Bott, O J; Giuse, D A

2006-01-01

To identify current challenges and developments in health information systems. Reports on HIS, eHealth and process support were analyzed, core problems and challenges were identified. Health information systems are extending their scope towards regional networks and health IT infrastructures. Integration, interoperability and interaction design are still today's core problems. Additional problems arise through the integration of genetic information into the health care process. There are noticeable trends towards solutions for these problems.

Challenges in Conducting Qualitative Research with Persons with Dementia

PubMed Central

Beuscher, Linda; Grando, Victoria T.

2010-01-01

Qualitative research can capture the meaningful experiences and life values of persons with dementia not reported in quantitative studies. This researcher shares personal experience of the challenges faced and the lessons learned while conducting a qualitative study of 15 persons with early stage Alzheimer’s disease. The purpose of this paper is to discuss the issues concerning determination of capacity to consent to research, consent/assent, communication challenges, and trustworthiness of data when conducting a qualitative study of persons with dementia. Understanding communication challenges due to dementia is important to develop effective communication strategies, such as simplifying the structure of questions, allowing ample time for participant’s response, using reminiscence, and redirecting the dialogue. This information will be valuable to researchers conducting future qualitative studies and the resulting contributions to the body of knowledge about Alzheimer’s PMID:20077988

Measurement Challenges in International Agreements

NASA Astrophysics Data System (ADS)

Luke, John

2006-10-01

Making measurements in support of international agreements can pose many challenges both from a policy and science point of view. Policy issues may arise because physics measurements made in the area of arms control or disarmament may be deemed too intrusive since they could possibly reveal sensitive information about the material that is being interrogated. Therefore, agreements must include a framework for safeguarding against the potential release of this information. Most of the scientific issues center around the fact that it is desirable to make high quality measurements without any operator interaction. This leads to the development of instrumentation and software that are very stable and robust. Due to different concerns, policy and science priorities may be at odds with one another. Therefore, it is the scientist's challenge - in this field - to keep policy makers informed by conveying what is technically possible and what is not in a manner that is easily understood and also negotiable. In this paper we will discuss some of the technology that has been developed to address some of these challenges in various international and model agreements. We will discuss the principle of informational barrier used in these measurement technologies to safeguard the release of sensitive information. We will also discuss some of the pitfalls that may arise when policy is ill informed about the physical constraints in the making of measurements of nuclear materials.

Challenges in conducting psychiatry studies in India

PubMed Central

Kharawala, Saifuddin; Dalal, Jeroze

2011-01-01

A large number of psychiatry studies are conducted in India. Psychiatry studies are complex and present unique challenges in the Indian setting. Ethical issues pertaining to the risk of worsening of illness, use of placebo and validity of informed consents are commonly faced. Site selection can be difficult due to the relative paucity of ICH-GCP (International Conference on Harmonisation - Good Clinical Practice) trained psychiatry investigators in India. Recruitment can be challenging due to issues such as strict eligibility criteria, (lack of) availability of caregiver, illness-related considerations, etc. Assessment of the consent capacity of patients is not simple, while structured assessments are not commonly employed. As the illness fluctuates, the consent capacity may change, thus requiring continued assessment of consent capacity. Study patients run the risk of worsening of illness and suicide due to exposure to inactive treatments; this risk is counterbalanced by use of appropriate study designs, as well as the indirect psychotherapeutic support received. Psychiatry studies are associated with a high placebo response. This necessitates conduct of placebo-controlled studies despite the attendant difficulties. Also, the high placebo response is often the cause of failed trials. Rating scales are essential for assessment of drug response. Some rating instruments as well as some rater training procedures may not be suitable for the Indian setting. Technological advancements may increase the procedural complexity but improve the quality of ratings. Psychiatry studies present monitors and auditors with unique scenarios too. Utilization of psychiatry specific training and expertise is recommended to ensure successful conduct of these studies in India. PMID:21584176

Additive manufacturing of tunable lenses

NASA Astrophysics Data System (ADS)

Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

2017-02-01

Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Sam Ortega, NASA program manager of Centennial Challenges, watches as robots attempt the rerun of the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Sample Return Robot Challenge staff members confer before the team Survey robots makes it's attempt at the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

What are the challenges in developing effective health policies for obesity?

PubMed

Binks, M; Chin, S-H

2017-06-01

Identifying and implementing thoughtful, evidence-based (or at least evidence-informed) public health approaches to influencing obesity is a complex issue fraught with multiple challenges. These challenges begin with determining whether obesity policy approaches should be implemented. This is considered within the broader context of how common public health policy approaches may be relevant and applied to obesity. Additional challenges discussed include inconsistencies in clearly identifying obesity policy targets (for example, prevention versus treatment), selection of appropriate intervention targets and the identification and measurement of meaningful outcomes. Current policy initiatives are drawn upon to illustrate these challenges in the context of promoting solution-focused dialog aimed toward improving current initiatives and informing the development of new programs.

Bringing nanomedicines to market: regulatory challenges, opportunities, and uncertainties.

PubMed

Nijhara, Ruchika; Balakrishnan, Krishna

2006-06-01

Scientists and entrepreneurs who contemplate developing nanomedicine products face several unique challenges in addition to many of the traditional hurdles of product development. In this review we analyze the major physicochemical, biologic and functional characteristics of several nanomedicine products on the market and explore the question of what made them unique. What made them successful? We also focus on the regulatory challenges faced by nanomedicine product developers. Based on these analyses, we propose the factors that are most likely to contribute to the success of nanomedicine products.

Ongoing ostomy self-care challenges of long-term rectal cancer survivors.

PubMed

Bulkley, Joanna E; McMullen, Carmit K; Grant, Marcia; Wendel, Christopher; Hornbrook, Mark C; Krouse, Robert S

2018-05-29

Surgical treatment for rectal cancer (RC) can result in an intestinal ostomy that requires lifelong adaptation and investment of physical, cognitive, and financial resources. However, little is known about the extent of ongoing challenges related to ostomy self-care among long-term RC survivors. We analyzed the prevalence of self-reported ostomy self-care challenges and the physical and environmental factors that can support or undermine ostomy self-care. We mailed surveys to long-term (≥ 5 years post-diagnosis) RC survivors, including 177 adults with ostomies who were members of integrated health systems in northern California, Oregon, and Washington State. Potential participants were identified through tumor registries. Data were also extracted from electronic health records. The response rate was 65%. The majority of respondents were male (67%), and the mean age was 75 years. Sixty-three percent of respondents reported at least one ostomy self-care challenge. The most common challenges were leakage or skin problems around the ostomy and needing to change the pouching system too frequently. Twenty-two percent reported difficulty caring for their ostomy. Younger age and higher BMI were consistently related to ostomy self-care challenges. The majority of RC survivors reported ostomy-related self-care challenges, and 31% experienced problems across multiple domains of ostomy self-care. In addition, most survivors reported significant physical challenges that could lead to ostomy-related disability. Although the participants surveyed had access to ostomy care nurses, the care gaps we found suggest that additional work is needed to understand barriers to ostomy care, reduce unmet needs, and improve well-being among this group.

The Endurant Stent Graft System: 15-month follow-up report in patients with challenging abdominal aortic anatomies.

PubMed

Hyhlik-Dürr, Alexander; Weber, Tim F; Kotelis, Drossos; Rengier, Fabian; Gahlen, Johannes; Böck, Stefanie; Köhler, Jürgen; Ratusinski, Christoph-M; Böckler, Dittmar

2011-08-01

The objective of this study is to report a 15-month follow-up with the Endurant Stent Graft System in patients with challenging aortic anatomies. At three German clinics, a consecutive series of 50 patients underwent endovascular abdominal aortic repair (EVAR) for challenging abdominal aortic aneurysm with the Endurant stent graft between November 2008 and May 2009. EVAR was elective in 48 cases and emergent in two. Patients had short (≤15 mm) aortic necks, severe suprarenal/infrarenal angulation, and/or small (<8 mm), calcified, severely angulated, or tortuous iliac or femoral access vessels. Additionally, a cohort of 40 patients without challenging anatomies were retrospectively analysed to clarify differences concerning technical success, mortality, and morbidity between these groups. The primary technical success rate was 92% (46/50). The 30-day mortality rate was 2% (1/50), the death due to multiorgan failure. Intraoperative angiograms revealed three type I endoleaks (2 proximal and 1 distal), and one of those was persisting at 30 days (30-day rate, 2%). Postoperative imaging discovered no further type I or type III endoleaks. The 30-day rate of the type II endoleak was 6% (3/50). There were two cases of graft limb occlusion, both requiring reintervention within 30 days. Follow-up was available in all of the 50 patients (100%) over a median of 15 months (1-25). During this time, seven patients died (overall mortality, 16%; 8/50), besides the above-described patient, all of them unrelated to the procedure. Compared to the 30-day results with the Endurant stent graft in non-challenging anatomies (no type I endoleak; no graft limb occlusion; all-cause mortality, 0%), procedure-related complications in challenging anatomies are increasing. Early and 15-month results with the Endurant stent graft in patients with challenging aortic anatomies are encouraging.

Due Process and Higher Education: A Systemic Approach to Fair Decision Making. ERIC Digest.

ERIC Educational Resources Information Center

Stevens, Ed

University officials and faculty are frequently required to make decisions based on interpretations of disputed facts. By applying the concept of due process within the context of higher education, they can meet legal challenges of contract and constitutional law and the pedagogical demand for justice. To guide their efforts, decision makers can…

Legal challenges in neurological practice.

PubMed

Jayalakshmi, Sita; Vooturi, Sudhindra

2016-10-01

Clinical neuroscience has made tremendous advances over the last century. Neurology as a discipline is still considered challenging and at times risky due to the natural history and progressive course of few of the neurological diseases. Encouragingly, the patient and their caregivers are now increasingly willing to be actively involved in making decisions. The patients' relationship with the doctor is a reflection of the society. A society that is orienting itself toward "rating" and "feedback" has made this doctor-patient relationship, a consumer-service provider relationship. This perhaps is due to commercialization of health that usually accompanies globalization. Moreover, a rapid influx of information from potential erroneous sources such as the Internet has also made patient and caregivers not being hesitant to taking legal course in the case of adverse events during treatment or simply because of dissatisfaction. The purpose of the legal process initiated by patients with neurological ailments is more often to compensate for the income lost, physical and psychological anguish that accompanies disease and its treatment, and to fund treatment or rehabilitation requirements. However, it is not clearly established if monetary benefits acquired lead to better opportunities for recovery of the patient. The consumer protection act and commercialization of medical services may well have an adverse effect on the doctor and patient relationship. Hence, there is a great need for all medical professionals to mutually complement and update each other. This review examines legal (litigation) processes with special interest on medicolegal system in patients with neurological ailments and the challenges faced by the neurologist during day-to-day clinical practice.

76 FR 41526 - Centennial Challenges 2011 Strong Tether Challenge

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-14

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-063)] Centennial Challenges 2011 Strong... scheduled and teams that wish to compete may register. Centennial Challenges is a program of prize... NASA Centennial Challenges Program please visit: http://www.nasa.gov/challenges . General questions and...

Common Ion Effects In Zeoponic Substrates: Dissolution And Cation Exchange Variations Due to Additions of Calcite, Dolomite and Wollastonite

NASA Technical Reports Server (NTRS)

Beiersdorfer, R. E.; Ming, D. W.; Galindo, C., Jr.

2003-01-01

c1inoptilolite-rich tuff-hydroxyapatite mixture (zeoponic substrate) has the potential to serve as a synthetic soil-additive for plant growth. Essential plant macro-nutrients such as calcium, phosphorous, magnesium, ammonium and potassium are released into solution via dissolution of the hydroxyapatite and cation exchange on zeolite charged sites. Plant growth experiments resulting in low yield for wheat have been attributed to a Ca deficiency caused by a high degree of cation exchange by the zeolite. Batch-equilibration experiments were performed in order to determine if the Ca deficiency can be remedied by the addition of a second Ca-bearing, soluble, mineral such as calcite, dolomite or wollastonite. Variations in the amount of calcite, dolomite or wollastonite resulted in systematic changes in the concentrations of Ca and P. The addition of calcite, dolomite or wollastonite to the zeoponic substrate resulted in an exponential decrease in the phosphorous concentration in solution. The exponential rate of decay was greatest for calcite (5.60 wt. % -I), intermediate for wollastonite (2.85 wt.% -I) and least for dolomite (1.58 wt.% -I). Additions of the three minerals resulted in linear increases in the calcium concentration in solution. The rate of increase was greatest for calcite (3.64), intermediate for wollastonite (2.41) and least for dolomite (0.61). The observed changes in P and Ca concentration are consistent with the solubilities of calcite, dolomite and wollastonite and with changes expected from a common ion effect with Ca. Keywords: zeolite, zeoponics, common-ion effect, clinoptilolite, hydroxyapatite

Aerodynamic challenges of ALT

NASA Technical Reports Server (NTRS)

Hooks, I.; Homan, D.; Romere, P. O.

1985-01-01

The approach and landing test (ALT) of the Space Shuttle Orbiter presented a number of unique challenges in the area of aerodynamics. The purpose of the ALT program was both to confirm the use of the Boeing 747 as a transport vehicle for ferrying the Orbiter across the country and to demonstrate the flight characteristics of the Orbiter in its approach and landing phase. Concerns for structural fatigue and performance dictated a tailcone be attached to the Orbiter for ferry and for the initial landing tests. The Orbiter with a tailcone attached presented additional challenges to the normal aft sting concept of wind tunnel testing. The landing tests required that the Orbiter be separated from the 747 at approximately 20,000 feet using aerodynamic forces to fly the vehicles apart. The concept required a complex test program to determine the relative effects of the two vehicles on each other. Also of concern, and tested, was the vortex wake created by the 747 and the means for the Orbiter to avoid it following separation.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Team KuuKulgur waits to begin the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

SSME to RS-25: Challenges of Adapting a Heritage Engine to a New Vehicle Architecture

NASA Technical Reports Server (NTRS)

Ballard, Richard O.

2015-01-01

A key constituent of the NASA Space Launch System (SLS) architecture is the RS-25 engine, also known as the Space Shuttle Main Engine (SSME). This engine was selected largely due to the maturity and extensive experience gained through 30-plus years of service. However, while the RS-25 is a highly mature system, simply unbolting it from the Space Shuttle and mounting it on the new SLS vehicle is not a "plug-and-play" operation. In addition to numerous technical integration and operational details, there were also hardware upgrades needed. While the magnitude of effort is less than that needed to develop a new clean-sheet engine system, this paper describes some of the expected and unexpected challenges encountered to date on the path to the first flight of SLS.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

The NASA Centennial Challenges prize, level one, is presented to team Mountaineers for successfully completing level one of the NASA 2014 Sample Return Robot Challenge, from left, Ken Stafford, WPI Challenge technical advisor; Colleen Shaver, WPI Challenge Manager; Ryan Watson, Team Mountaineers; Marvin Cheng, Team Mountaineers; Alexander Hypes, Team Mountaineers; Jarred Strader, Team Mountaineers; Lucas Behrens, Team Mountaineers; Yu Gu, Team Mountaineers; Nick Ohi, Team Mountaineers; Dorothy Rasco, NASA Deputy Associate Administrator for the Space Technology Mission Directorate; Scott Harper, Team Mountaineers; Tanmay Mandal, Team Mountaineers; David Miller, NASA Chief Technologist; Sam Ortega, NASA Program Manager for Centennial Challenges, Saturday, June 14, 2014, at Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team Mountaineers was the only team to complete the level one challenge. During the competition, teams were required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge was to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Genetic testing and genetic counseling in patients with sudden death risk due to heritable arrhythmias.

PubMed

Spoonamore, Katherine G; Ware, Stephanie M

2016-03-01

Sudden cardiac death due to heritable ventricular arrhythmias is an important cause of mortality, especially in young healthy individuals. The identification of the genetic basis of Mendelian diseases associated with arrhythmia has allowed the integration of this information into the diagnosis and clinical management of patients and at-risk family members. The rapid expansion of genetic testing options and the increasing complexity involved in the interpretation of results creates unique opportunities and challenges. There is a need for competency to incorporate genetics into clinical management and to provide appropriate family-based risk assessment and information. In addition, disease-specific genetic knowledge is required to order and correctly interpret and apply genetic testing results. Importantly, genetic diagnosis has a critical role in the risk stratification and clinical management of family members. This review summarizes the approach to genetic counseling and genetic testing for inherited arrhythmias and highlights specific genetic principles that apply to long QT syndrome, short QT syndrome, Brugada syndrome, and catecholaminergic polymorphic ventricular tachycardia. Copyright © 2016 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

78 FR 19742 - Centennial Challenges: 2014 Night Rover Challenge

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-032] Centennial Challenges: 2014 Night... Centennial Challenges 2014 Night Rover Challenge. SUMMARY: This notice is issued in accordance with 51 U.S.C.... Centennial Challenges is a program of prize competitions to stimulate innovation in technologies of interest...

Increasing clinical relevance in oral radiology: Benefits and challenges when implementing digital assessment.

PubMed

de Lange, T; Møystad, A; Torgersen, G R

2018-02-13

The aims of the study were to investigate benefits and challenges in implementing a digital examination and study the clinical relevance of the digital examination in relation to clinical training and practice. The study was based on semi-structured focus-group interviews from two distinct student populations (2016 and 2017) in a bachelor programme in dental hygiene. In addition, conversational data from a plenary discussion from the whole second student population (2017) were collected and analysed. The data were approached on basis of content analysis. A benefit experienced in the digital examination was the ease in typing and editing answers on the computer. This suggests an increased effectiveness in computer-based compared to analogue examinations. An additional advantage was the experienced relevance of the examination related to the clinic. This finding refers not only to the digital presentations of images, but also to the entire setting in the clinic and dental practice. The limitations reported by the students were non-optimal viewing conditions for presenting radiographic images and difficulties in obtaining an overview of the assignments compared to paper-based examinations due to the linear digital examination format. The last finding on lacking overview revealed an influence on student performances which should be taken seriously in designing digital examinations. In conclusion, the digital layout increases efficiency and clinical relevance of examinations to a certain extent. Obstacles were found in limitations related to image presentation and lack of overview of the examination. The latter challenge raises questions related to developing suitable assessment software. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Development of volume deposition on cast iron by additive manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sridharan, Niyanth; Dehoff, Ryan R.; Jordan, Brian H.

2016-11-10

ORNL partnered with Cummins to demonstrate the feasibility of using additive manufacturing techniques to help develop repair techniques for refurbished cast iron engine blocks. Cummins is interested in the refurbished engine business due to the increased cost savings and reduced emissions. It is expected that by refurbishing engines could help reduce the green house gas emissions by as much as 85%. Though such repair techniques are possible in principle there has been no major industry in the automotive sector that has deployed this technology. Therefore phase-1 would seek to evaluate the feasibility of using the laser directed energy deposition techniquemore » to repair cast iron engine blocks. The objective of the phase-1 would be to explore various strategies and understand the challenges involved. During phase-1 deposits were made using Inconel-718, Nickel, Nr-Cr-B braze filler. Inconel 718 builds showed significant cracking in the heat-affected zone in the cast iron. Nickel was used to reduce the cracking in the cast iron substrate, however the Ni builds did not wet the substrate sufficiently resulting in poor dimensional tolerance. In order to increase wetting the Ni was alloyed with the Ni-Cr-B braze to decrease the surface tension of Ni. This however resulted in significant cracks in the build due to shrinkage stresses associated with multiple thermal cycling. Hence to reduce the residual stresses in the builds the DMD-103D equipment was modified and the cast iron block was pre heated using cartridge heaters. Inconel-718 alloyed with Ni was deposited on the engine block. The pre-heated deposits showed a reduced susceptibility to cracking. If awarded the phase-2 of the project would aim to develop process parameters to achieve a crack free deposit engine block.« less

Big Data Goes Personal: Privacy and Social Challenges

ERIC Educational Resources Information Center

Bonomi, Luca

2015-01-01

The Big Data phenomenon is posing new challenges in our modern society. In addition to requiring information systems to effectively manage high-dimensional and complex data, the privacy and social implications associated with the data collection, data analytics, and service requirements create new important research problems. First, the high…

Oral Salmonella challenge alters feed preference in newly weaned pigs

USDA-ARS?s Scientific Manuscript database

Common industry practice is to segregate sick pigs; however, the same diet is provided. Due to the higher nutrient demand of the activated immune system, we hypothesized pigs would choose diets differing in nutrient content during an immune challenge when given choices. This study examined pig feed ...

Challenges for Electronics in the Vision for Space Exploration

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.

2005-01-01

This presentation has been a brief snapshot discussing electronics and Exploration-related challenges. The vision for Space Exploration creates a new paradigm for NASA missions. This includes transport (Crew Exploration Vehicle-CEV), and lunar and Mars Exploration and human presence. If one considers the additional hazards faced by these concepts versus more traditional NASA missions, multiple challenges surface for reliable utilization of electronic parts. The true challenge is to provide a risk as low as reasonably achievable (ALARA-a traditional biological radiation exposure term), while still providing cost effective solutions. This presentation also discusses the hazard for electronic parts and exploration, the types of electronic parts for exploration, and the critical juncture for space usage of commercial changes in the electronics world.

Regulatory T Cell Therapy for Uveitis: A New Promising Challenge.

PubMed

Foussat, Arnaud; Gregoire, Sylvie; Clerget-Chossat, Nathalie; Terrada, Celine; Asnagli, Hélène; Lemoine, François M; Klatzmann, David; LeHoang, Phuc; Forte, Miguel; Bodaghi, Bahram

2017-05-01

Uveitis is a sight-threatening primary intraocular inflammation of various origins in mainly young and active patients. Due to the absence of biomarkers in most of the cases, the current treatment of noninfectious entities remains nonspecific, using corticosteroids, conventional immunosuppressors, and more recently biological agents. Identification of regulatory T cells in different models of autoimmune uveitis together with the evaluation of this important subpopulation in different entities paved the way for new therapeutic strategies, in addition to exclusive pharmaceutical approaches. Upregulation of regulatory T cells induced by biological agents has been recently highlighted. Development of cell therapy in autoimmune diseases is at its stammering needing more experimental data and robust clinical trials to demonstrate safety and efficacy before larger developments. Specific or polyclonal Tregs may be used, but it is of utmost importance to determine the method of selection, the level of activation, and the route of administration. Mastering immune cell therapy remains a challenging goal in patients with autoimmune diseases, but it may significantly enlarge our therapeutic possibilities in severe and refractory situations.

Molecularly imprinted polymers for the detection of illegal drugs and additives: a review.

PubMed

Xiao, Deli; Jiang, Yue; Bi, Yanping

2018-04-04

This review (with 154 refs.) describes the current status of using molecularly imprinted polymers in the extraction and quantitation of illicit drugs and additives. The review starts with an introduction into some synthesis methods (lump MIPs, spherical MIPs, surface imprinting) of MIPs using illicit drugs and additives as templates. The next section covers applications, with subsections on the detection of illegal additives in food, of doping in sports, and of illicit addictive drugs. A particular focus is directed towards current limitations and challenges, on the optimization of methods for preparation of MIPs, their applicability to aqueous samples, the leakage of template molecules, and the identification of the best balance between adsorption capacity and selectivity factor. At last, the need for convincing characterization methods, the lack of uniform parameters for defining selectivity, and the merits and demerits of MIPs prepared using nanomaterials are addressed. Strategies are suggested to solve existing problems, and future developments are discussed with respect to a more widespread use in relevant fields. Graphical abstract This review gives a comprehensive overview of the advances made in molecularly imprinting of polymers for use in the extraction and quantitation of illicit drugs and additives. Methods for syntheses, highlighted applications, limitations and current challenges are specifically addressed.

Determining forest carbon stock losses due to wildfire disturbance in the Western United States

Treesearch

John M. Zobel; John W. Coulston

2015-01-01

Quantifying carbon stock losses after wildfire events is challenging due to the lack of detailed information before and after the disturbance. We propose to use the extensive Western FIA database (including periodic and annual inventories) to recreate pre- and post-fire conditions to better estimate actual carbon losses. Methods include using remeasurement date where...

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Russel Howe of team Survey speaks with Sample Return Robot Challenge staff members after the team's robot failed to leave the starting platform during it's attempt at the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Material Challenges and Opportunities for Commercial Electric Aircraft

NASA Technical Reports Server (NTRS)

Misra, Ajay

2014-01-01

Significant reduction in carbon dioxide emission for future air transportation system will require adoption of electric propulsion system and more electric architectures. Various options for aircraft electric propulsion include hybrid electric, turboelectric, and full electric system. Realization of electric propulsion system for commercial aircraft applications will require significant increases in power density of electric motors and energy density of energy storage system, such as the batteries and fuel cells. In addition, transmission of MW of power in the aircraft will require high voltage power transmission system to reduce the weight of the power transmission system. Finally, there will be significant thermal management challenges. Significant advances in material technologies will be required to meet these challenges. Technologies of interest include materials with higher electrical conductivity than Cu, high thermal conductivity materials, and lightweight electrically insulating materials with high breakdown voltage, high temperature magnets, advanced battery and fuel cell materials, and multifunctional materials. The presentation will include various challenges for commercial electric aircraft and provide an overview of material improvements that will be required to meet these challenges.

Rewards and challenges of family practice

PubMed Central

Manca, Donna P.; Varnhagen, Stanley; Brett-MacLean, Pamela; Allan, G. Michael; Szafran, Olga; Ausford, Allen; Rowntree, Carol; Rumzan, Ismael; Turner, Diana

2007-01-01

OBJECTIVE To identify and describe the important rewards and challenges that affect family physicians in Alberta. DESIGN Web-based qualitative study using the Delphi method. SETTING Province of Alberta. PARTICIPANTS Twenty-eight family physicians practising in Alberta. METHODS The study website presented a description of the project, ethical information, a calendar of events, and contact information. Delphi surveys and demographic questionnaires were password protected. Five rounds of surveys were conducted between May 2004 and January 2005. Participants were notified of each round of surveys and prompted by e–mail ifthey did not respond. FINDINGS Participants identified 8 key rewards and 9 key challenges. The research team identified 2 additional challenges that were validated by participants. In order of perceived importance, key rewards were providing diverse and comprehensive care; providing preventive care; having relationships with patients and their families; being an immersed witness to the human condition; providing continuity of care and receiving ongoing feedback; having flexibility and control of practice and job security; maintaining and acquiring skills and knowledge; teaching and sharing knowledge and gaining experience and mentoring. The challenges, in order of perceived need to be addressed, were workload and time pressures and meeting demands; the need to promote the rewards of family practice to those considering joining the profession; overhead and income inequities; getting respect from specialists; the need to ensure that the rewards identified are not adversely affected by primary care reform; lack of availability of specialists, procedures, tests, and other resources; running a practice as a small business; paperwork, telephone calls, and forms; maintaining and acquiring skills and knowledge; patients’ expectations; and medicolegal issues, insurance paperwork, and dealing with medical claims related to motor vehicle accidents. CONCLUSION

Overcoming the Challenges of Co-creation

NASA Astrophysics Data System (ADS)

Pandya, R.; Udu-gama, N.; Goodwin, M.; Otellini, P.

2016-12-01

There is growing interest in co-creation, especially for community-related issues like climate change, resilience, pollution, and environmental justice. Nevertheless, co-creation is still not mainstream practice in either geosciences or the world of decision-makers. This presents many challenges. On the science side, challenges include a paucity of training opportunities, lack of funding for co-creation, difficulty publishing or otherwise getting credit for the effort, and a perceived lack of prestige compared to theoretical research. On the community side, parallel challenges include a lack of experience working with scientists or thinking about geoscience's relevance to community issues, tight budgets and competing priorities, the need for outputs beyond publications, and the difficulty including science among a range of factors. Additionally, scientists and community leaders often work across public and private sectors and must navigate different approaches to data, privacy, and accountability. We'll use this session to explore opportunities to overcome the challenges of co-creation. Systems thinking suggests a range of approaches: enabling individuals, reducing specific challenges, changing the relationship between the elements of the systems, and changing the goals or mindsets of the systems - each more powerful than the last. For example, mentoring and coaching enables individuals, and pro-bono work eases the challenge of getting professional credit. New modes of output, like plain language abstracts, change the relationship between publications and other outputs. We can work on changing mindsets by publicizing and celebrating individual successes. With more effort and impact, we can build collaborations in the collective impact model, where we bring scientific and community organizations together around a common agenda and shared measurement. Building on these examples, we will use this session to collect strategies and opportunities from all participants.

Technology Challenges for Deep-Throttle Cryogenic Engines for Space Exploration

NASA Technical Reports Server (NTRS)

Brown, Kendall K.; Nelson, Karl W.

2005-01-01

Historically, cryogenic rocket engines have not been used for in-space applications due to their additional complexity, the mission need for high reliability, and the challenges of propellant boil-off. While the mission and vehicle architectures are not yet defined for the lunar and Martian robotic and human exploration objectives, cryogenic rocket engines offer the potential for higher performance and greater architecture/mission flexibility. In-situ cryogenic propellant production could enable a more robust exploration program by significantly reducing the propellant mass delivered to low earth orbit, thus warranting the evaluation of cryogenic rocket engines versus the hypergolic bi-propellant engines used in the Apollo program. A multi-use engine. one which can provide the functionality that separate engines provided in the Apollo mission architecture, is desirable for lunar and Mars exploration missions because it increases overall architecture effectiveness through commonality and modularity. The engine requirement derivation process must address each unique mission application and each unique phase within each mission. The resulting requirements, such as thrust level, performance, packaging, bum duration, number of operations; required impulses for each trajectory phase; operation after extended space or surface exposure; availability for inspection and maintenance; throttle range for planetary descent, ascent, acceleration limits and many more must be addressed. Within engine system studies, the system and component technology, capability, and risks must be evaluated and a balance between the appropriate amount of technology-push and technology-pull must be addressed. This paper will summarize many of the key technology challenges associated with using high-performance cryogenic liquid propellant rocket engine systems and components in the exploration program architectures. The paper is divided into two areas. The first area describes how the mission

Technology Challenges for Deep-Throttle Cryogenic Engines for Space Exploration

NASA Astrophysics Data System (ADS)

Brown, Kendall K.; Nelson, Karl W.

2005-02-01

Historically, cryogenic rocket engines have not been used for in-space applications due to their additional complexity, the mission need for high reliability, and the challenges of propellant boil-off. While the mission and vehicle architectures are not yet defined for the lunar and Martian robotic and human exploration objectives, cryogenic rocket engines offer the potential for higher performance and greater architecture/mission flexibility. In-situ cryogenic propellant production could enable a more robust exploration program by significantly reducing the propellant mass delivered to low earth orbit, thus warranting the evaluation of cryogenic rocket engines versus the hypergolic bipropellant engines used in the Apollo program. A multi-use engine, one which can provide the functionality that separate engines provided in the Apollo mission architecture, is desirable for lunar and Mars exploration missions because it increases overall architecture effectiveness through commonality and modularity. The engine requirement derivation process must address each unique mission application and each unique phase within each mission. The resulting requirements, such as thrust level, performance, packaging, burn duration, number of operations; required impulses for each trajectory phase; operation after extended space or surface exposure; availability for inspection and maintenance; throttle range for planetary descent, ascent, acceleration limits and many more must be addressed. Within engine system studies, the system and component technology, capability, and risks must be evaluated and a balance between the appropriate amount of technology-push and technology-pull must be addressed. This paper will summarize many of the key technology challenges associated with using high-performance cryogenic liquid propellant rocket engine systems and components in the exploration program architectures. The paper is divided into two areas. The first area describes how the mission

The Challenge of Acquisitions in the Digital Age

ERIC Educational Resources Information Center

Whittaker, Martha

2008-01-01

People are now beginning to appreciate that acquisitions in the digital world is different. In addition to business acumen and accounting knowledge, a digital-age acquisitions librarian needs to understand scholarly communication and the emerging business models of digital publishing. In this article, the author discusses the challenges and the…

Assessment Challenges for Business Education in Changing Times

ERIC Educational Resources Information Center

Hazari, Sunil; Gaytan, Jorge; North, Alexa

2008-01-01

In addition to the difficult task of identifying teaching methods that ensure student learning, the American educational system is facing significant challenges. Schools are struggling to maintain standards for high-quality teaching while trying to address the learning needs of students with Limited English Proficiency (LEP). The same struggle is…

Precise Positioning of Uavs - Dealing with Challenging Rtk-Gps Measurement Conditions during Automated Uav Flights

NASA Astrophysics Data System (ADS)

Zimmermann, F.; Eling, C.; Klingbeil, L.; Kuhlmann, H.

2017-08-01

For some years now, UAVs (unmanned aerial vehicles) are commonly used for different mobile mapping applications, such as in the fields of surveying, mining or archeology. To improve the efficiency of these applications an automation of the flight as well as the processing of the collected data is currently aimed at. One precondition for an automated mapping with UAVs is that the georeferencing is performed directly with cm-accuracies or better. Usually, a cm-accurate direct positioning of UAVs is based on an onboard multi-sensor system, which consists of an RTK-capable (real-time kinematic) GPS (global positioning system) receiver and additional sensors (e.g. inertial sensors). In this case, the absolute positioning accuracy essentially depends on the local GPS measurement conditions. Especially during mobile mapping applications in urban areas, these conditions can be very challenging, due to a satellite shadowing, non-line-of sight receptions, signal diffraction or multipath effects. In this paper, two straightforward and easy to implement strategies will be described and analyzed, which improve the direct positioning accuracies for UAV-based mapping and surveying applications under challenging GPS measurement conditions. Based on a 3D model of the surrounding buildings and vegetation in the area of interest, a GPS geometry map is determined, which can be integrated in the flight planning process, to avoid GPS challenging environments as far as possible. If these challenging environments cannot be avoided, the GPS positioning solution is improved by using obstruction adaptive elevation masks, to mitigate systematic GPS errors in the RTK-GPS positioning. Simulations and results of field tests demonstrate the profit of both strategies.

Promises and challenges in solid-state lighting

NASA Astrophysics Data System (ADS)

Schubert, Fred

2010-03-01

Lighting technologies based on semiconductor light-emitting diodes (LEDs) offer unprecedented promises that include three major benefits: (i) Gigantic energy savings enabled by efficient conversion of electrical energy to optical energy; (ii) Substantial positive contributions to sustainability through reduced emissions of global-warming gases, acid-rain gases, and toxic substances such as mercury; and (iii) The creation of new paradigms in lighting driven by the unique controllability of solid-state lighting sources. Due to the powerful nature of these benefits, the transition from conventional lighting sources to solid-state lighting is virtually assured. This presentation will illustrate the new world of lighting and illustrate the pervasive changes to be expected in lighting, displays, communications, and biotechnology. The presentation will also address the formidable challenges that must be addressed to continue the further advancement of solid-state lighting technology. These challenges offer opportunities for research and innovation. Specific challenges include light management, carrier transport, and optical design. We will present some innovative approaches in order to solve known technical challenges faced by solid-state lighting. These approaches include the demonstration and use of new optical thin-film materials with a continuously tunable refractive index. These approaches also include the use of polarization-matched structures that reduce the polarization fields in GaInN LEDs and the hotly debated efficiency droop, that is, the decreasing LED efficiency at high currents.

Analysis Of Resistance And Effective Wake Friction Due To Addition Of Stern Tunnels On Passenger Ship Using Cfd

NASA Astrophysics Data System (ADS)

Chrismianto, D.; Tuswan; Manik, P.

2018-03-01

In this study, the stern tunnel to improve the efficiency of ship propulsion system is analysed. Stern tunnels installed on the two sides of the ship stern. Analysis of ship resistance and wake friction of the ship using CFD are carried out. The stern tunnel height (Hw) and length (L) are implemented to find the better stern tunnel form of the ship. The result of analysis showed that model has a high stern tunnels (Hw) of 1,444 m or additional high stern tunnels ratio of 16% and stern long tunnels (L) about 7 m is a model that has the smallest resistance about 1.1137 N or able to make reduction of resistance amount 11.2582%. While, the model with the addition of height of 0.2 m and a length of 9 m of stern tunnel is a model that has the better advanced speed about 4,927% in increase, and better wake friction about 30.4% in reduce.

POET: Planetary Orbital Evolution due to Tides

NASA Astrophysics Data System (ADS)

Penev, Kaloyan

2014-08-01

POET (Planetary Orbital Evolution due to Tides) calculates the orbital evolution of a system consisting of a single star with a single planet in orbit under the influence of tides. The following effects are The evolutions of the semimajor axis of the orbit due to the tidal dissipation in the star and the angular momentum of the stellar convective envelope by the tidal coupling are taken into account. In addition, the evolution includes the transfer of angular momentum between the stellar convective and radiative zones, effect of the stellar evolution on the tidal dissipation efficiency, and stellar core and envelope spins and loss of stellar convective zone angular momentum to a magnetically launched wind. POET can be used out of the box, and can also be extended and modified.

Abidjan: new challenges. UNAIDS focus.

PubMed

1998-03-01

This article focuses on the challenges as a result of the AIDS epidemic in Africa. Updated surveillance uncovers 16,000 new infections a day and 30 million people are now living with HIV/AIDS. In addition, 1 in 100 adults in the 15-49 age group are infected with HIV and only 1 in 10 infected persons are aware of their HIV status. At the 10th International Conference on AIDS and Sexually Transmitted Diseases in Africa in 1997, Dr. Peter Piot, Executive Director of the Joint UN Program on HIV/AIDS, drew attention to the importance of unmasking what is in many places still an invisible epidemic. Dr. Piot said that the alarming situation calls for an unprecedented global effort. In conclusion, Dr. Piot issued these challenges of: breaking the silence, focusing on the next generation, making AIDS a development issue, and ensuring solidarity to help Africa scale up its response to the epidemic.

Tubular Tissues and Organs of Human Body--Challenges in Regenerative Medicine.

PubMed

Góra, Aleksander; Pliszka, Damian; Mukherjee, Shayanti; Ramakrishna, Seeram

2016-01-01

Tissue engineering of tubular organs such as the blood vessel, trachea gastrointestinal tract, urinary tract are of the great interest due to the high amount of surgeries performed annually on those organs. Development in tissue engineering in recent years and promising results, showed need to investigate more complex constructs that need to be designed in special manner. Stent technology remain the most widely used procedure to restore functions of tubular tissues after cancer treatment, or after organ removal due to traumatic accidents. Tubular structures like blood vessels, intestines, and trachea have to work in specific environment at the boundary of the liquids, solids or air and surrounding tissues and ensure suitable separation between them. This brings additional challenges in tissue engineering science in order to construct complete organs by using combinations of various cells along with the support material systems. Here we give a comprehensive review of the tubular structures of the human body, in perspective of the current methods of treatment and progress in regenerative medicine that aims to develop fully functioning organs of tubular shape. Extensive analysis of the available literature has been done focusing on materials and methods of creations of such organs. This work describes the attempts to incorporate growth factors and drugs within the scaffolds to ensure localized drug release and enhance vascularization of the organ by attracting blood vessels to the site of implantation.

Challenging clinical presentations of pernicious anemia.

PubMed

Oo, Thein Hlaing; Rojas-Hernandez, Cristhiam Mauricio

2017-09-01

Pernicious anemia (PA) is an autoimmune disease of multifactorial etiologies characterized by autoimmune chronic atrophic gastritis, cobalamin deficiency (CD) due to defective absorption of dietary cobalamin from the terminal ileum, and by the presence of intrinsic factor and parietal cell antibodies. PA is a very common cause of CD-related anemia worldwide. Despite advances in the understanding molecular biology and pathophysiology of PA, the diagnosis of PA remains challenging in many circumstances for many clinicians because of its diverse clinical manifestations and the limitations of currently available diagnostic tools. Diagnostic dilemmas could occur when patients with PA present with spuriously normal or high cobalamin levels, normocytic or microcytic anemia, non-anemic macrocytosis, autoimmune hemolytic anemia, pseudo-thrombotic microangiopathy, hyperhomocysteinemia-associated thromboembolism, pseudoleu-kemia, bone marrow failure, bone marrow ring sideroblasts, and neurologic manifestations without anemia or macrocytosis. Herein, we provide an overview of the challenging clinical presentations of PA, diagnostic approach, and management.

Fabrication of Turbine Disk Materials by Additive Manufacturing

NASA Technical Reports Server (NTRS)

Sudbrack, Chantal; Bean, Quincy A.; Cooper, Ken; Carter, Robert; Semiatin, S. Lee; Gabb, Tim

2014-01-01

Precipitation-strengthened, nickel-based superalloys are widely used in the aerospace and energy industries due to their excellent environmental resistance and outstanding mechanical properties under extreme conditions. Powder-bed additive manufacturing (AM) technologies offer the potential to revolutionize the processing of superalloy turbine components by eliminating the need for extensive inventory or expensive legacy tooling. Like selective laser melting (SLM), electron beam melting (EBM) constructs three-dimensional dense components layer-by-layer by melting and solidification of atomized, pre-alloyed powder feedstock within 50-200 micron layers. While SLM has been more widely used for AM of nickel alloys like 718, EBM offers several distinct advantages, such as less retained residual stress, lower risk of contamination, and faster build rates with multiple-electron-beam configurations. These advantages are particularly attractive for turbine disks, for which excessive residual stress and contamination can shorten disk life during high-temperature operation. In this presentation, we will discuss the feasibility of fabricating disk superalloy components using EBM AM. Originally developed using powder metallurgy forging processing, disk superalloys contain a higher refractory content and precipitate volume fraction than alloy 718, thus making them more prone to thermal cracking during AM. This and other challenges to produce homogeneous builds with desired properties will be presented. In particular, the quality of lab-scale samples fabricated via a design of experiments, in which the beam current, build temperature, and beam velocity were varied, will be summarized. The relationship between processing parameters, microstructure, grain orientation, and mechanical response will be discussed.

Terabit Wireless Communication Challenges

NASA Technical Reports Server (NTRS)

Hwu, Shian U.

2012-01-01

This presentation briefly discusses a research effort on Terabit Wireless communication systems for possible space applications. Recently, terahertz (THz) technology (300-3000 GHz frequency) has attracted a great deal of interest from academia and industry. This is due to a number of interesting features of THz waves, including the nearly unlimited bandwidths available, and the non-ionizing radiation nature which does not damage human tissues and DNA with minimum health threat. Also, as millimeter-wave communication systems mature, the focus of research is, naturally, moving to the THz range. Many scientists regard THz as the last great frontier of the electromagnetic spectrum, but finding new applications outside the traditional niches of radio astronomy, Earth and planetary remote sensing, and molecular spectroscopy particularly in biomedical imaging and wireless communications has been relatively slow. Radiologists find this area of study so attractive because t-rays are non-ionizing, which suggests no harm is done to tissue or DNA. They also offer the possibility of performing spectroscopic measurements over a very wide frequency range, and can even capture signatures from liquids and solids. According to Shannon theory, the broad bandwidth of the THz frequency bands can be used for terabit-per-second (Tb/s) wireless communication systems. This enables several new applications, such as cell phones with 360 degrees autostereoscopic displays, optic-fiber replacement, and wireless Tb/s file transferring. Although THz technology could satisfy the demand for an extremely high data rate, a number of technical challenges need to be overcome before its development. This presentation provides an overview the state-of-the- art in THz wireless communication and the technical challenges for an emerging application in Terabit wireless systems. The main issue for THz wave propagation is the high atmospheric attenuation, which is dominated by water vapor absorption in the THz

Nanocrystal Additives for Advanced Lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, Gregory; Lohuis, James; Demas, Nicholaos

The innovations in engine and drivetrain lubricants are mainly driven by ever more stringent regulations, which demand better fuel economy, lower carbon emission, and less pollution. Many technologies are being developed for the next generations of vehicles to achieve these goals. Even if these technologies can be adopted, there still is a significant need for a “drop-in” lubricant solution for the existing ground vehicle fleet to reap immediate fuel savings at the same time reduce the pollution. Dramatic improvements were observed when Pixelligent’s proprietary, mono-dispersed, and highly scalable metal oxide nanocrystals were added to the base oils. The dispersions inmore » base and formulated oils are clear and without any change of appearance and viscosity. However, the benefits provided by the nanocrystals were limited to the base oils due to the interference of exiting additives in the fully formulated oils. Developing a prototype formulation including the nanocrystals that can demonstrate the same improvements observed in the base oils is a critical step toward the commercialization of these advanced nano-additives. A ‘bottom-up’ approach was adopted to develop a prototype lubricant formulation to avoid the complicated interactions with the multitude of additives, only minimal numbers of most essential additives are added, step by step, into the formulation, to ensure that they are compatible with the nanocrystals and do not compromise their tribological performance. Tribological performance are characterized to come up with the best formulations that can demonstrate the commercial potential of the nano-additives.« less

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Sam Ortega, NASA program manager for Centennial Challenges, is seen during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The Retrievers team robot is seen as it attempts the level one challenge the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Physiological and Psychological Challenges of Increasing Physical Activity and Exercise in Patients at Risk of Diabetic Foot Ulcers: A Critical Review

PubMed Central

Crews, Ryan T.; Schneider, Kristin L.; Yalla, Sai V.; Reeves, Neil D.; Vileikyte, Loretta

2017-01-01

Obesity and a sedentary lifestyle are common challenges among individuals at risk of diabetic foot ulcers (DFUs). While substantial research exists on physical activity interventions in adults with diabetes, those at greatest risk for foot ulceration were often excluded or not well-represented. Both at-risk patients and their clinicians may be hesitant to increase physical activity due to their perception of DFU risks. Physical activity is not contraindicated for those at risk of DFU, yet patients at risk present with unique barriers to initiating increases in physical activity. This review focuses upon the physiological and psychological challenges of increasing physical activity and exercise in patients at risk of DFUs. Offloading, diabetic peripheral neuropathy, depression, pain, self-efficacy and social support, DFU risk-specific beliefs and emotions, and research to date on exercise interventions in this population are all discussed. Additionally, recommendations for implementing and researching physical activity interventions for individuals at risk for DFU are provided. PMID:27155091

In-Situ monitoring and modeling of metal additive manufacturing powder bed fusion

NASA Astrophysics Data System (ADS)

Alldredge, Jacob; Slotwinski, John; Storck, Steven; Kim, Sam; Goldberg, Arnold; Montalbano, Timothy

2018-04-01

One of the major challenges in metal additive manufacturing is developing in-situ sensing and feedback control capabilities to eliminate build errors and allow qualified part creation without the need for costly and destructive external testing. Previously, many groups have focused on high fidelity numerical modeling and true temperature thermal imaging systems. These approaches require large computational resources or costly hardware that requires complex calibration and are difficult to integrate into commercial systems. In addition, due to the rapid change in the state of the material as well as its surface properties, getting true temperature is complicated and difficult. Here, we describe a different approach where we implement a low cost thermal imaging solution allowing for relative temperature measurements sufficient for detecting unwanted process variability. We match this with a faster than real time qualitative model that allows the process to be rapidly modeled during the build. The hope is to combine these two, allowing for the detection of anomalies in real time, enabling corrective action to potentially be taken, or parts to be stopped immediately after the error, saving material and time. Here we describe our sensor setup, its costs and abilities. We also show the ability to detect in real time unwanted process deviations. We also show that the output of our high speed model agrees qualitatively with experimental results. These results lay the groundwork for our vision of an integrated feedback and control scheme that combines low cost, easy to use sensors and fast modeling for process deviation monitoring.

Harmonic Resonance in Power Transmission Systems due to the Addition of Shunt Capacitors

NASA Astrophysics Data System (ADS)

Patil, Hardik U.

Shunt capacitors are often added in transmission networks at suitable locations to improve the voltage profile. In this thesis, the transmission system in Arizona is considered as a test bed. Many shunt capacitors already exist in the Arizona transmission system and more are planned to be added. Addition of these shunt capacitors may create resonance conditions in response to harmonic voltages and currents. Such resonance, if it occurs, may create problematic issues in the system. It is main objective of this thesis to identify potential problematic effects that could occur after placing new shunt capacitors at selected buses in the Arizona network. Part of the objective is to create a systematic plan for avoidance of resonance issues. For this study, a method of capacitance scan is proposed. The bus admittance matrix is used as a model of the networked transmission system. The calculations on the admittance matrix were done using Matlab. The test bed is the actual transmission system in Arizona; however, for proprietary reasons, bus names are masked in the thesis copy intended for the public domain. The admittance matrix was obtained from data using the PowerWorld Simulator after equivalencing the 2016 summer peak load (planning case). The full Western Electricity Coordinating Council (WECC) system data were used. The equivalencing procedure retains only the Arizona portion of the WECC. The capacitor scan results for single capacitor placement and multiple capacitor placement cases are presented. Problematic cases are identified in the form of 'forbidden response. The harmonic voltage impact of known sources of harmonics, mainly large scale HVDC sources, is also presented. Specific key results for the study indicated include: (1) The forbidden zones obtained as per the IEEE 519 standard indicates the bus 10 to be the most problematic bus. (2) The forbidden zones also indicate that switching values for the switched shunt capacitor (if used) at bus 3 should be

Redo thoracic endovascular aortic repair due to endoleak with celiac artery snorkeling.

PubMed

Planer, David; Bliagos, Dimitrios; Gray, William A

2011-10-01

Reintervention due to endoleak of aortic endograft repair is often challenging. Herein, we report endovascular endoleak repair in a patient with previous thoracic and abdominal endovascular grafts with extensive coverage of the aorta. The present technique included snorkeling of the celiac trunk to preserve antegrade flow in the celiac artery and to maintain future options for reintervention. Copyright © 2011 Annals of Vascular Surgery Inc. Published by Elsevier Inc. All rights reserved.

Challenging Girls' Constructions of Femininity in the Outdoors

ERIC Educational Resources Information Center

Whittington, Anja

2006-01-01

This qualitative study examined how participation in an extensive all-female wilderness program challenged conventional notions of femininity for adolescent girls. Interviews were conducted 4 to 5 months and 15 to 18 months after completion of a 23-day canoe expedition. Additional data collection included a focus group, a public presentation,…

Delaying Orthostatic Syncope With Mental Challenge

NASA Astrophysics Data System (ADS)

Goswami, Nandu; Roessler, Andreas; Hinghofer-Szalkay, Helmut; Montani, Jean-Pierre; Steptoe, Andrew

2012-07-01

At orthostatic vasovagal syncope there appears to be a sudden withdrawl of sympathetic activity. As mental challenge activates the sympathetic system, we hypothesized that doing mental arithmetic in volunteers driven to the end point of their cardiovascular stability may delay the onset of orthostatic syncope. We investigated this in healthy male subjects. Each subject underwent a head up tilt (HUT) + graded lower body negative pressure (LBNP) up to presyncope session (control) to determine the orthostatic tolerance time, OTT (Time from HUT commencement to development of presyncopal symptoms/signs). Once the tolerance time was known, a randomized crossover protocol was used: either 1) Repeat HUT + LBNP to ensure reproducibility of repeated run or 2) HUT + LBNP run but with added mental challenge (two min before the expected presyncope time). Test protocols were separated by two weeks. Our studies on five male test subjects indicate that mental challenge improves orthostatic tolerance significantly. Additional mental loading could be a useful countermeasure to alleviate the orthostatic responses of persons, particularly in those with histories of dizziness on standing up, or to alleviate hypotension that frequently occurs during hemodialysis or on return to earth from the spaceflight environment of microgravity.

Additives for cement compositions based on modified peat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kopanitsa, Natalya, E-mail: kopanitsa@mail.ru; Sarkisov, Yurij, E-mail: sarkisov@tsuab.ru; Gorshkova, Aleksandra, E-mail: kasatkina.alexandra@gmail.com

High quality competitive dry building mixes require modifying additives for various purposes to be included in their composition. There is insufficient amount of quality additives having stable properties for controlling the properties of cement compositions produced in Russia. Using of foreign modifying additives leads to significant increasing of the final cost of the product. The cost of imported modifiers in the composition of the dry building mixes can be up to 90% of the material cost, depending on the composition complexity. Thus, the problem of import substitution becomes relevant, especially in recent years, due to difficult economic situation. The articlemore » discusses the possibility of using local raw materials as a basis for obtaining dry building mixtures components. The properties of organo-mineral additives for cement compositions based on thermally modified peat raw materials are studied. Studies of the structure and composition of the additives are carried out by physicochemical research methods: electron microscopy and X-ray analysis. Results of experimental research showed that the peat additives contribute to improving of cement-sand mortar strength and hydrophysical properties.« less

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team Survey robot retrieves a sample during a demonstration of the level two challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

The University of California Santa Cruz Rover Team prepares their rover for the rerun of the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Team Cephal's robot is seen on the starting platform during a rerun of the level one challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

A robot from the Intrepid Systems team is seen during the rerun of the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

A team KuuKulgur robot is seen as it begins the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The team Mountaineers robot is seen as it attempts the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The Stellar Automation Systems team poses for a picture with their robot after attempting the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team Survey robot is seen as it conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

All four of team KuuKulgur's robots are seen as they attempt the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Spectators watch as the team Survey robot conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Team Middleman's robot, Ro-Bear, is seen as it starts the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

The team Mountaineers robot is seen after picking up the sample during a rerun of the level one challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Two of team KuuKulgur's robots are seen as they attempt a rerun of the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

A robot from the University of Waterloo Robotics Team is seen during the rerun of the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Members of team Survey follow their robot as it conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The entrance to Institute Park is seen during the level one challenge as during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Sam Ortega, NASA Centennial Challenges Program Manager, speaks at a breakfast opening the TouchTomorrow Festival, held in conjunction with the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

A team KuuKulgur robot approaches the sample as it attempts the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team survey robot is seen on the starting platform before begging it's attempt at the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The Mountaineers team from West Virginia University, watches as their robot attempts the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team Survey robot is seen as it conducts a demonstration of the level two challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Team Survey's robot is seen as it conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

[Clinical and health economic challenges of personalized medicine].

PubMed

Brüggenjürgen, B; Kornbluth, L; Ferrara, J V; Willich, S N

2012-05-01

Healthcare systems across the globe are currently challenged by aging populations, increases in chronic diseases and the difficult task of managing a healthcare budget. In this health economic climate, personalized medicine promises not only an improvement in healthcare delivery but also the possibility of more cost-effective therapies. It is important to remember, however, that personalized medicine has the potential to both increase and decrease costs. Each targeted therapy must be evaluated individually. However, standard clinical trial design is not suitable for personalized therapies. Therefore, both scientists and regulatory authorities will need to accept innovative study designs in order to validate personalized therapies. Hence correct economic evaluations are difficult to carry out due to lack of clear clinical evidence, longitudinal accounting and experience with patient/clinician behavior in the context of personalized medicine. In terms of reimbursement, payers, pharmaceutical companies and companion diagnostic manufacturers will also need to explore creative risk-sharing concepts. Germany is no exception to the challenges that face personalized medicine and for personalized medicine to really become the future of medicine many health economic challenges first need to be overcome. The health economic implications of personalized medicine remain unclear but it is certain that the expansion of targeted therapies in current healthcare systems will create a host of challenges.

Foundational Methane Propulsion Related Technology Efforts, and Challenges for Applications to Human Exploration Beyond Earth Orbit

NASA Technical Reports Server (NTRS)

Brown, Thomas; Klem, Mark; McRight, Patrick

2016-01-01

Current interest in human exploration beyond earth orbit is driving requirements for high performance, long duration space transportation capabilities. Continued advancement in photovoltaic power systems and investments in high performance electric propulsion promise to enable solar electric options for cargo delivery and pre-deployment of operational architecture elements. However, higher thrust options are required for human in-space transportation as well as planetary descent and ascent functions. While high thrust requirements for interplanetary transportation may be provided by chemical or nuclear thermal propulsion systems, planetary descent and ascent systems are limited to chemical solutions due to their higher thrust to weight and potential planetary protection concerns. Liquid hydrogen fueled systems provide high specific impulse, but pose challenges due to low propellant density and the thermal issues of long term propellant storage. Liquid methane fueled propulsion is a promising compromise with lower specific impulse, higher bulk propellant density and compatibility with proposed in-situ propellant production concepts. Additionally, some architecture studies have identified the potential for commonality between interplanetary and descent/ascent propulsion solutions using liquid methane (LCH4) and liquid oxygen (LOX) propellants. These commonalities may lead to reduced overall development costs and more affordable exploration architectures. With this increased interest, it is critical to understand the current state of LOX/LCH4 propulsion technology and the remaining challenges to its application to beyond earth orbit human exploration. This paper provides a survey of NASA's past and current methane propulsion related technology efforts, assesses the accomplishments to date, and examines the remaining risks associated with full scale development.

South African Academic Health--the future challenge.

PubMed

van Zyl, G J

2004-02-01

In South Africa, significant changes in Academic Health have taken place since the first democratic elections in 1994. Academic Health came from a separated academic hospital, departmental-based curriculum and research focussed on achievement, and an abundance of money, to a position of integrated service delivery with specific reference to primary health care, separation of service levels, a new integrated curriculum, research focussed according to the need and contract research, and financial constraints with limited budgets. The management of this change is a task challenging the manager in all fields of Academic Health. Leaders need to know their environment and organisation to be able to manage change. Academic Health centres are experiencing major changes as a result of the effects of managed care, reduced rate and growing expenditure on health services. In addition to restructuring of the clinical services, Academic Health centres are being challenged to sustain their academic mission and priorities in the face of resource constraints. In order to tackle these challenges, institutions need physicians in administrative positions at all levels who can provide leadership and thoughtful managerial initiatives. The future challenge for managers focuses on service delivery, research, health education and training, Academic Health management, professionalism and financial management.

Additive manufacturing of collagen scaffolds by three-dimensional plotting of highly viscous dispersions.

PubMed

Lode, Anja; Meyer, Michael; Brüggemeier, Sophie; Paul, Birgit; Baltzer, Hagen; Schröpfer, Michaela; Winkelmann, Claudia; Sonntag, Frank; Gelinsky, Michael

2016-02-27

Additive manufacturing (AM) allows the free form fabrication of three-dimensional (3D) structures with distinct external geometry, fitting into a patient-specific defect, and defined internal pore architecture. However, fabrication of predesigned collagen scaffolds using AM-based technologies is challenging due to the low viscosity of collagen solutions, gels or dispersions commonly used for scaffold preparation. In the present study, we have developed a straightforward method which is based on 3D plotting of a highly viscous, high density collagen dispersion. The swollen state of the collagen fibrils at pH 4 enabled the homogenous extrusion of the material, the deposition of uniform strands and finally the construction of 3D scaffolds. Stabilization of the plotted structures was achieved by freeze-drying and chemical crosslinking with the carbodiimide EDC. The scaffolds exhibited high shape and dimensional fidelity and a hierarchical porosity consisting of macropores generated by strand deposition as well as an interconnected microporosity within the strands as result of the freeze-drying process. Cultivation of human mesenchymal stromal cells on the scaffolds, with and without adipogenic or osteogenic stimulation, revealed their cytocompatibility and potential applicability for adipose and bone tissue engineering.

Transcriptomic Analysis of Carboxylic Acid Challenge in Escherichia coli: Beyond Membrane Damage

PubMed Central

Royce, Liam A.; Boggess, Erin; Fu, Yao; Liu, Ping; Shanks, Jacqueline V.; Dickerson, Julie; Jarboe, Laura R.

2014-01-01

Carboxylic acids are an attractive biorenewable chemical. Enormous progress has been made in engineering microbes for production of these compounds though titers remain lower than desired. Here we used transcriptome analysis of Escherichia coli during exogenous challenge with octanoic acid (C8) at pH 7.0 to probe mechanisms of toxicity. This analysis highlights the intracellular acidification and membrane damage caused by C8 challenge. Network component analysis identified transcription factors with altered activity including GadE, the activator of the glutamate-dependent acid resistance system (AR2) and Lrp, the amino acid biosynthesis regulator. The intracellular acidification was quantified during exogenous challenge, but was not observed in a carboxylic acid producing strain, though this may be due to lower titers than those used in our exogenous challenge studies. We developed a framework for predicting the proton motive force during adaptation to strong inorganic acids and carboxylic acids. This model predicts that inorganic acid challenge is mitigated by cation accumulation, but that carboxylic acid challenge inverts the proton motive force and requires anion accumulation. Utilization of native acid resistance systems was not useful in terms of supporting growth or alleviating intracellular acidification. AR2 was found to be non-functional, possibly due to membrane damage. We proposed that interaction of Lrp and C8 resulted in repression of amino acid biosynthesis. However, this hypothesis was not supported by perturbation of lrp expression or amino acid supplementation. E. coli strains were also engineered for altered cyclopropane fatty acid content in the membrane, which had a dramatic effect on membrane properties, though C8 tolerance was not increased. We conclude that achieving higher production titers requires circumventing the membrane damage. As higher titers are achieved, acidification may become problematic. PMID:24586888

Antibodies are necessary for rVSV/ZEBOV-GP-mediated protection against lethal Ebola virus challenge in nonhuman primates.

PubMed

Marzi, Andrea; Engelmann, Flora; Feldmann, Friederike; Haberthur, Kristen; Shupert, W Lesley; Brining, Douglas; Scott, Dana P; Geisbert, Thomas W; Kawaoka, Yoshihiro; Katze, Michael G; Feldmann, Heinz; Messaoudi, Ilhem

2013-01-29

Ebola viruses cause hemorrhagic disease in humans and nonhuman primates with high fatality rates. These viruses pose a significant health concern worldwide due to the lack of approved therapeutics and vaccines as well as their potential misuse as bioterrorism agents. Although not licensed for human use, recombinant vesicular stomatitis virus (rVSV) expressing the filovirus glycoprotein (GP) has been shown to protect macaques from Ebola virus and Marburg virus infections, both prophylactically and postexposure in a homologous challenge setting. However, the immune mechanisms of protection conferred by this vaccine platform remain poorly understood. In this study, we set out to investigate the role of humoral versus cellular immunity in rVSV vaccine-mediated protection against lethal Zaire ebolavirus (ZEBOV) challenge. Groups of cynomolgus macaques were depleted of CD4+ T, CD8+ T, or CD20+ B cells before and during vaccination with rVSV/ZEBOV-GP. Unfortunately, CD20-depleted animals generated a robust IgG response. Therefore, an additional group of vaccinated animals were depleted of CD4+ T cells during challenge. All animals were subsequently challenged with a lethal dose of ZEBOV. Animals depleted of CD8+ T cells survived, suggesting a minimal role for CD8+ T cells in vaccine-mediated protection. Depletion of CD4+ T cells during vaccination caused a complete loss of glycoprotein-specific antibodies and abrogated vaccine protection. In contrast, depletion of CD4+ T cells during challenge resulted in survival of the animals, indicating a minimal role for CD4+ T-cell immunity in rVSV-mediated protection. Our results suggest that antibodies play a critical role in rVSV-mediated protection against ZEBOV.

Introduction to the Special Issue: Interventions to Reduce Challenging Behavior Among Individuals With Autism Spectrum Disorder.

PubMed

Davis, Tonya N; Rispoli, Mandy

2018-05-01

The prevalence of autism spectrum disorder (ASD) is on the rise. In addition to the social communication skill deficits and restrictive repetitive behaviors and interests, many individuals with ASD engage in challenging behavior. Challenging behavior is associated with a multitude of negative outcomes. Challenging behavior may cause harm to the individual with ASD as well as limit opportunities for educational, vocational, and social participation and development. In addition, caregivers experience high stress and low quality of mental health. As a result, challenging behavior warrants intervention that is specifically tailored to the unique characteristics of individuals with ASD. The purpose of this Special Issue is to showcase recent research in the treatment of challenging behavior for individuals with ASD. This two-part Special Issue contains 12 studies that range from systematic and quality reviews of the intervention literature, to innovative treatment approaches, to studies that develop and evaluate treatments for restrictive and repetitive behaviors and interests.

USCT data challenge

NASA Astrophysics Data System (ADS)

Ruiter, Nicole V.; Zapf, Michael; Hopp, Torsten; Gemmeke, Hartmut; van Dongen, Koen W. A.

2017-03-01

In the past years we have perceived within the USCT research community a demand for freely available USCT data sets. Inspired by the idea of Open Science, this collection of data sets could stimulate the collaboration and the exchange of ideas and experiences between USCT researchers. In addition, it may lead to comprehensive comparison of different reconstruction algorithms and their results. Finally, by collecting feedback from the users about data and system architecture, valuable information is gathered for further development of measurement setups. For the above reasons, we have initiated a digital portal with several reference data sets and access scripts under free licenses. To kick off this initiative, we organized a USCT data challenge event at SPIE Medical Imaging 2017.

Non-autoclaved aerated concrete with mineral additives

NASA Astrophysics Data System (ADS)

Il'ina, L. V.; Rakov, M. A.

2016-01-01

We investigated the effect of joint grinding of Portland cement clinker, silica and carbonate components and mineral additives to specific surface of 280 - 300 m2/kg on the properties (strength, average density and thermal conductivity) of non-autoclaved aerated concrete, and the porosity of the hardened cement paste produced from Portland cement clinker with mineral additives. The joint grinding of the Portland cement clinker with silica and carbonate components and mineral additives reduces the energy consumption of non-autoclaved aerated concrete production. The efficiency of mineral additives (diopside, wollastonite) is due to the closeness the composition, the type of chemical bonds, physical and chemical characteristics (specific enthalpy of formation, specific entropy) to anhydrous clinker minerals and their hydration products. Considering the influence of these additions on hydration of clinker minerals and formation of hardened cement paste structure, dispersed wollastonite and diopside should be used as mineral additives. The hardness and, consequently, the elastic modulus of diopside are higher than that of hardened cement paste. As a result, there is a redistribution of stresses in the hardened cement paste interporous partitions and hardening, both the partitions and aerated concrete on the whole. The mineral additives introduction allowed to obtain the non-autoclaved aerated concrete with average density 580 kg/m3, compressive strength of 3.3 MPa and thermal conductivity of 0.131 W/(m.°C).

Erythema Nodosum Leprosum: Update and challenges on the treatment of a neglected condition.

PubMed

Costa, Perpétua do Socorro Silva; Fraga, Lucas Rosa; Kowalski, Thayne Woycinck; Daxbacher, Egon Luiz Rodrigues; Schuler-Faccini, Lavínia; Vianna, Fernanda Sales Luiz

2018-07-01

Erythema Nodosum Leprosum (ENL) occurs due to the immunological complication of multibacillary leprosy and is characterized by painful nodules and systemic compromising. It is usually recurrent and/or chronic and has both physical and economic impact on the patient, being a very important cause of disability. In addition, ENL is a major health problem in countries where leprosy is endemic. Therefore, adequate control of this condition is important. The management of ENL aims to control acute inflammation and neuritis and prevent the onset of new episodes. However, all currently available treatment modalities have one or two drawbacks and are not effective for all patients. Corticosteroid is the anti-inflammatory of choice in ENL but may cause dependence, especially for chronic patients. Thalidomide has a rapid action but its use is limited due the teratogenicity and neurotoxicity. Clofazimine and pentoxifylline have slow action and have important adverse effects. Finally, there is no pattern or guidelines for treating these patients, becoming more difficult to evaluate and to control this condition. This review aims to show the main drugs used in the treatment of ENL and the challenges in the management of the reaction. Copyright © 2018 Elsevier B.V. All rights reserved.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Ahti Heinla, left, and Sulo Kallas, right, from Estonia, prepare team KuuKulgur's robot for the rerun of the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

A sample can be seen on the competition field as the team Survey robot conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Jascha Little of team Survey is seen as he follows the teams robot as it conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The University of California Santa Cruz Rover Team poses for a picture with their robot after attempting the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

The University of California Santa Cruz Rover Team's robot is seen prior to starting it's second attempt at the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The Oregon State University Mars Rover Team poses for a picture with their robot following their attempt at the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The University of Waterloo Robotics Team, from Canada, prepares to place their robot on the start platform during the level one challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Sam Ortega, NASA program manager for Centennial Challenges, is interviewed by a member of the media before the start of level two competition at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Jerry Waechter of team Middleman from Dunedin, Florida, speaks about his team's robot, Ro-Bear, as it makes it attempt at the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Use of Lactobacillus johnsonii in broilers challenged with Salmonella sofia.

PubMed

Olnood, Chen G; Beski, Sleman S M; Choct, Mingan; Iji, Paul A

2015-09-01

The effects of Lactobacillus johnsonii (L. johnsonii) on gut microflora, bird performance and intestinal development were assessed using 288 one-day-old Cobb broilers challenged with Salmonella sofia ( S . sofia ). The experiment was a 3 × 2 factorial design which consisted of three treatments, a negative control (NC) with no additives, a positive control (PC) containing antimicrobials (zinc-bacitracin, 50 mg/kg) and a probiotic group (Pro), and with the two factors being unchallenged or challenged with S . sofia . A probiotic preparation of L . johnsonii (10 9 cfu/chick) was administered to chicks individually by oral gavage on days 1, 3, 7 and 12. Chicks were individually challenged with S. sofia (10 7 cfu/chick) by oral gavage on d 2, 8 and 13. Results showed that the challenge itself markedly reduced ( P < 0.05) bird performance and feed intake. And, transient clinical symptoms of the infection with S . sofia were observed from the second time they were challenged with S . sofia in the negative challenge groups. The novel probiotic candidate L . johnsonii reduced the number of S . sofia and Clostridium perfringens in the gut environment, and improved the birds' colonization resistance to S . sofia .

Is the normal heart rate ``chaotic'' due to respiration?

NASA Astrophysics Data System (ADS)

Wessel, Niels; Riedl, Maik; Kurths, Jürgen

2009-06-01

The incidence of cardiovascular diseases increases with the growth of the human population and an aging society, leading to very high expenses in the public health system. Therefore, it is challenging to develop sophisticated methods in order to improve medical diagnostics. The question whether the normal heart rate is chaotic or not is an attempt to elucidate the underlying mechanisms of cardiovascular dynamics and therefore a highly controversial topical challenge. In this contribution we demonstrate that linear and nonlinear parameters allow us to separate completely the data sets of the three groups provided for this controversial topic in nonlinear dynamics. The question whether these time series are chaotic or not cannot be answered satisfactorily without investigating the underlying mechanisms leading to them. We give an example of the dominant influence of respiration on heart beat dynamics, which shows that observed fluctuations can be mostly explained by respiratory modulations of heart rate and blood pressure (coefficient of determination: 96%). Therefore, we recommend reformulating the following initial question: "Is the normal heart rate chaotic?" We rather ask the following: "Is the normal heart rate `chaotic' due to respiration?"

Energy-effective Grinding of Inorganic Solids Using Organic Additives.

PubMed

Mishra, Ratan K; Weibel, Martin; Müller, Thomas; Heinz, Hendrik; Flatt, Robert J

2017-08-09

We present our research findings related to new formulations of the organic additives (grinding aids) needed for the efficient grinding of inorganic solids. Even though the size reduction phenomena of the inorganic solid particles in a ball mill is purely a physical process, the addition of grinding aids in milling media introduces a complex physicochemical process. In addition to further gain in productivity, the organic additive helps to reduce the energy needed for grinding, which in the case of cement clinker has major environmental implications worldwide. This is primarily due to the tremendous amounts of cement produced and almost 30% of the associated electrical energy is consumed for grinding. In this paper, we examine the question of how to optimize these grinding aids linking molecular insight into their working mechanisms, and also how to design chemical additives of improved performance for industrial comminution.

Factors governing dissolution process of lignocellulosic biomass in ionic liquid: current status, overview and challenges.

PubMed

Badgujar, Kirtikumar C; Bhanage, Bhalchandra M

2015-02-01

The utilisation of non-feed lignocellulosic biomass as a source of renewable bio-energy and synthesis of fine chemical products is necessary for the sustainable development. The methods for the dissolution of lignocellulosic biomass in conventional solvents are complex and tedious due to the complex chemical ultra-structure of biomass. In view of this, recent developments for the use of ionic liquid solvent (IL) has received great attention, as ILs can solubilise such complex biomass and thus provides industrial scale-up potential. In this review, we have discussed the state-of-art for the dissolution of lignocellulosic material in representative ILs. Furthermore, various process parameters and their influence for biomass dissolution were reviewed. In addition to this, overview of challenges and opportunities related to this interesting area is presented. Copyright © 2014 Elsevier Ltd. All rights reserved.

Challenge of biomechanics.

PubMed

Volokh, K Y

2013-06-01

The application of mechanics to biology--biomechanics--bears great challenges due to the intricacy of living things. Their dynamism, along with the complexity of their mechanical response (which in itself involves complex chemical, electrical, and thermal phenomena) makes it very difficult to correlate empirical data with theoretical models. This difficulty elevates the importance of useful biomechanical theories compared to other fields of engineering. Despite inherent imperfections of all theories, a well formulated theory is crucial in any field of science because it is the basis for interpreting observations. This is all-the-more vital, for instance, when diagnosing symptoms, or planning treatment to a disease. The notion of interpreting empirical data without theory is unscientific and unsound. This paper attempts to fortify the importance of biomechanics and invigorate research efforts for those engineers and mechanicians who are not yet involved in the field. It is not aimed here, however, to give an overview of biomechanics. Instead, three unsolved problems are formulated to challenge the readers. At the micro-scale, the problem of the structural organization and integrity of the living cell is presented. At the meso-scale, the enigma of fingerprint formation is discussed. At the macro-scale, the problem of predicting aneurysm ruptures is reviewed. It is aimed here to attract the attention of engineers and mechanicians to problems in biomechanics which, in the author's opinion, will dominate the development of engineering and mechanics in forthcoming years.

78 FR 49296 - Centennial Challenges 2014 Sample Return Robot Challenge

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... Return Robot Challenge AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of Centennial Challenges 2014 Sample Return Robot Challenge. SUMMARY: This notice is issued in accordance with 51 U.S.C. 20144(c). The 2014 Sample Return Robot Challenge is scheduled and teams that wish to...

Additive Manufacturing of Biomaterials, Tissues, and Organs.

PubMed

Zadpoor, Amir A; Malda, Jos

2017-01-01

The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further development of patient-specific healthcare solutions. Customization of many healthcare products and services, such as implants, drug delivery devices, medical instruments, prosthetics, and in vitro models, would have been extremely challenging-if not impossible-without AM technologies. The current special issue of the Annals of Biomedical Engineering presents the latest trends in application of AM techniques to healthcare-related areas of research. As a prelude to this special issue, we review here the most important areas of biomedical research and clinical practice that have benefited from recent developments in additive manufacturing techniques. This editorial, therefore, aims to sketch the research landscape within which the other contributions of the special issue can be better understood and positioned. In what follows, we briefly review the application of additive manufacturing techniques in studies addressing biomaterials, (re)generation of tissues and organs, disease models, drug delivery systems, implants, medical instruments, prosthetics, orthotics, and AM objects used for medical visualization and communication.

Continuing challenges in influenza

PubMed Central

Webster, Robert G.; Govorkova, Elena A.

2014-01-01

Influenza is an acute respiratory disease in mammals and domestic poultry that emerges from zoonotic reservoirs in aquatic birds and bats. Although influenza viruses are among the most intensively studied pathogens, existing control options require further improvement. Influenza vaccines must be regularly updated because of continuous antigenic drift and sporadic antigenic shifts in the viral surface glycoproteins. Currently, influenza therapeutics are limited to neuraminidase inhibitors; novel drugs and vaccine approaches are therefore urgently needed. Advances in vaccinology and structural analysis have revealed common antigenic epitopes on hemagglutinins across all influenza viruses and suggest that a universal influenza vaccine is possible. In addition, various immunomodulatory agents and signaling pathway inhibitors are undergoing preclinical development. Continuing challenges in influenza include the emergence of pandemic H1N1 influenza in 2009, human infections with avian H7N9 influenza in 2013, and sporadic human cases of highly pathogenic avian H5N1 influenza. Here, we review the challenges facing influenza scientists and veterinary and human public health officials; we also discuss the exciting possibility of achieving the ultimate goal of controlling influenza’s ability to change its antigenicity. PMID:24891213

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Kenneth Stafford, Assistant Director of Robotics Engineering and Director of the Robotics Resource Center at the Worcester Polytechnic Institute (WPI), verifies the location of the target sample during the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Members of the Mountaineers team from West Virginia University celebrate after their robot returned to the starting platform after picking up the sample during a rerun of the level one challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Dosimetric variations due to interfraction organ deformation in cervical cancer brachytherapy.

PubMed

Kobayashi, Kazuma; Murakami, Naoya; Wakita, Akihisa; Nakamura, Satoshi; Okamoto, Hiroyuki; Umezawa, Rei; Takahashi, Kana; Inaba, Koji; Igaki, Hiroshi; Ito, Yoshinori; Shigematsu, Naoyuki; Itami, Jun

2015-12-01

We quantitatively estimated dosimetric variations due to interfraction organ deformation in multi-fractionated high-dose-rate brachytherapy (HDRBT) for cervical cancer using a novel surface-based non-rigid deformable registration. As the number of consecutive HDRBT fractions increased, simple addition of dose-volume histogram parameters significantly overestimated the dose, compared with distribution-based dose addition. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

75 FR 47316 - Centennial Challenges 2010 Strong Tether Challenge

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Centennial Challenges 2010 Strong Tether Challenge... teams that wish to compete may register. Centennial Challenges is a program of prize competitions to..., please visit: http://www.spaceward.org/elevator2010-ts . For general information on the NASA Centennial...

Corrosion Challenges for the Oil and Gas Industry in the State of Qatar

NASA Astrophysics Data System (ADS)

Johnsen, Roy

In Qatar oil and gas has been produced from onshore fields in more than 70 years, while the first offshore field delivered its first crude oil in 1965. Due to the atmospheric conditions in Qatar with periodically high humidity, high chloride content, dust/sand combined with the temperature variations, external corrosion is a big treat to the installations and connecting infrastructure. Internal corrosion in tubing, piping and process systems is also a challenge due to high H2S content in the hydrocarbon mixture and exposure to corrosive aquifer water. To avoid corrosion different type of mitigations like application of coating, chemical treatment and material selection are important elements. This presentation will review the experiences with corrosion challenges for oil & gas installations in Qatar including some examples of corrosion failures that have been seen.

Intravenous hemostats: challenges in translation to patients

NASA Astrophysics Data System (ADS)

Lashof-Sullivan, Margaret; Shoffstall, Andrew; Lavik, Erin

2013-10-01

Excessive bleeding and the resulting complications are a leading killer of young people globally. There are many successful methods to halt bleeding in the extremities, including compression, tourniquets, and dressings. However, current treatments for internal hemorrhage (including from head or truncal injuries), termed non-compressible bleeding, are inadequate. For these non-compressible injuries, blood transfusions are the current treatment standard. However, they must be refrigerated, may potentially transfer disease, and are of limited supply. In addition, time is of the essence for halting hemorrhage, since more than a third of civilian deaths due to hemorrhage from trauma occur before the patient even reaches the hospital. As a result, particles that can cross-link activated platelets through the glycoprotein IIb/IIIa receptor expressed on activated platelets are being investigated as an alternative treatment for non-compressible bleeding. Ideally, these particles would interact specifically with platelets to stabilize the platelet plug. Initial designs used biologically derived microparticles with red blood cell fragment or albumin cores decorated with RGD or fibrinogen, which bind to GPIIb/IIIa. More recently there has been research into the use of fully synthetic nanoparticles with liposomal or polymer cores that crosslink platelets through a targeting peptide bound to the surface. Some of the challenges for the development of these particles include appropriate sizing to prevent blocking the capillaries of the lungs, immune system evasion to prevent strong reactions and increase circulation time, and storage and resuspension so that first responders can easily use the particles. In addition, the effectiveness of the variety of animal bleeding models in predicting outcomes must be examined before test results can be fully understood. Progress has been made in the development of particles to combat hemorrhage, but issues of immune sensitivity and storage

On an additive partial correlation operator and nonparametric estimation of graphical models.

PubMed

Lee, Kuang-Yao; Li, Bing; Zhao, Hongyu

2016-09-01

We introduce an additive partial correlation operator as an extension of partial correlation to the nonlinear setting, and use it to develop a new estimator for nonparametric graphical models. Our graphical models are based on additive conditional independence, a statistical relation that captures the spirit of conditional independence without having to resort to high-dimensional kernels for its estimation. The additive partial correlation operator completely characterizes additive conditional independence, and has the additional advantage of putting marginal variation on appropriate scales when evaluating interdependence, which leads to more accurate statistical inference. We establish the consistency of the proposed estimator. Through simulation experiments and analysis of the DREAM4 Challenge dataset, we demonstrate that our method performs better than existing methods in cases where the Gaussian or copula Gaussian assumption does not hold, and that a more appropriate scaling for our method further enhances its performance.

On an additive partial correlation operator and nonparametric estimation of graphical models

PubMed Central

Li, Bing; Zhao, Hongyu

2016-01-01

Abstract We introduce an additive partial correlation operator as an extension of partial correlation to the nonlinear setting, and use it to develop a new estimator for nonparametric graphical models. Our graphical models are based on additive conditional independence, a statistical relation that captures the spirit of conditional independence without having to resort to high-dimensional kernels for its estimation. The additive partial correlation operator completely characterizes additive conditional independence, and has the additional advantage of putting marginal variation on appropriate scales when evaluating interdependence, which leads to more accurate statistical inference. We establish the consistency of the proposed estimator. Through simulation experiments and analysis of the DREAM4 Challenge dataset, we demonstrate that our method performs better than existing methods in cases where the Gaussian or copula Gaussian assumption does not hold, and that a more appropriate scaling for our method further enhances its performance. PMID:29422689

Contamination Effects Due to Space Environmental Interactions

NASA Technical Reports Server (NTRS)

Chen, Philip T.; Paquin, Krista C. (Technical Monitor)

2001-01-01

Molecular and particulate contaminants are commonly generated from the orbital spacecraft operations that are under the influence of the space environment. Once generated, these contaminants may attach to the surfaces of the spacecraft or may remain in the vicinity of the spacecraft. In the event these contaminants come to rest on the surfaces of the spacecraft or situated in the line-of-sight of the observation path, they will create various degrees of contamination effect which may cause undesirable effects for normal spacecraft operations, There will be circumstances in which the spacecraft may be subjected to special space environment due to operational conditions. Interactions between contaminants and special space environment may alter or greatly increase the contamination effect due to the synergistic effect. This paper will address the various types of contamination generation on orbit, the general effects of the contamination on spacecraft systems, and the typical impacts on the spacecraft operations due to the contamination effect. In addition, this paper will explain the contamination effect induced by the space environment and will discuss the intensified contamination effect resulting from the synergistic effect with the special space environment.

Challenges in oral drug delivery in patients with esophageal dysphagia.

PubMed

Kappelle, Wouter F W; Siersema, Peter D; Bogte, Auke; Vleggaar, Frank P

2016-01-01

Esophageal dysphagia is a commonly reported symptom with various benign and malignant causes. Esophageal dysphagia can impede intake of oral medication, which often poses a major challenge for both patients and physicians. The best way to address this challenge depends of the cause of dysphagia. The pathophysiology of esophageal dysphagia is discussed, diagnostic tools to determine its cause are reviewed and recent developments in the treatment of esophageal dysphagia are discussed. Alternative options to administer medication in dysphagia are discussed and the appropriateness of them reviewed. Two ways can be followed to allow medication intake in patients with esophageal dysphagia, i.e. altering medication or resolving dysphagia. The latter is generally preferred, since esophageal dysphagia rarely only impedes medication intake. Esophageal resection is possible in more advanced esophageal cancer stages due to advances in neo-adjuvant therapy. Due to recent improvements in intraluminal radiotherapy, it can be expected that this will be the primary treatment in a palliative setting. Temporary self-expandable metal stent placement is a promising new alternative for bougienage in difficult-to-treat benign strictures.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Russel Howe of team Survey, center, works on a laptop to prepare the team's robot for a demonstration run after the team's robot failed to leave the starting platform during it's attempt at the level two challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Development of a waterborne challenge model for Flavobacterium psychrophilum.

PubMed

Long, Amy; Fehringer, Tyson R; LaFrentz, Benjamin R; Call, Douglas R; Cain, Kenneth D

2014-10-01

Flavobacterium psychrophilum is the causative agent of bacterial coldwater disease and can cause significant mortality in salmonid aquaculture. To better evaluate disease prevention or treatment methods for F. psychrophilum in the laboratory, a waterborne challenge model that mimics a natural outbreak is needed. Here we report on the development of a waterborne challenge model for F. psychrophilum in which we incorporated variables that may influence challenge success: specifically, scarification prior to bacterial exposure and culture of F. psychrophilum under iron-limited culture conditions to potentially increase the probability of establishing disease. Additionally, two F. psychrophilum strains, CSF 259-93 and THC 02-90, were used in this model to test whether there were virulence differences between strains. Mortality was significantly higher in scarred fish than unscarred fish (81.5 vs. 19.4%), supporting the hypothesis that disruptions in the dermal layer enhance mortality in F. psychrophilum waterborne challenges. Although mortality differences were not significant between iron-replete and iron-limited treatments, mortality was high overall (> 30%). There was a significant difference in mortality between CSF 259-93 and THC 02-90 treatments, although both strains caused high mortality in injection challenges. In conclusion, this waterborne challenge model can be used to evaluate potential disease prevention and treatment methods. © 2014 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

Challenges and Opportunities in Reactive Processing and Applications of Advanced Ceramic Materials

NASA Technical Reports Server (NTRS)

Singh, Mrityunjay

2003-01-01

Recently, there has been a great deal of interest in the research, development, and commercialization of innovative synthesis and processing technologies for advanced ceramics and composite materials. Reactive processing approaches have been actively considered due to their robustness, flexibility, and affordability. A wide variety of silicon carbide-based advanced ceramics and composites are currently being fabricated using the processing approaches involving reactive infiltration of liquid and gaseous species into engineered fibrous or microporous carbon performs. The microporous carbon performs have been fabricated using the temperature induced phase separation and pyrolysis of two phase organic (resin-pore former) mixtures and fiber reinforcement of carbon and ceramic particulate bodies. In addition, pyrolyzed native plant cellulose tissues also provide unique carbon templates for manufacturing of non-oxide and oxide ceramics. In spite of great interest in this technology due to their affordability and robustness, there is a lack of scientific basis for process understanding and many technical challenges still remain. The influence of perform properties and other parameters on the resulting microstructure and properties of final material is not well understood. In this presentation, mechanism of silicon-carbon reaction in various systems and the effect of perform microstructure on the mechanical properties of advanced silicon carbide based materials will be discussed. Various examples of applications of reactively processed advanced silicon carbide ceramics and composite materials will be presented.

Cultural Dimensions of Feedback at an Australian University: A Study of International Students with English as an Additional Language

ERIC Educational Resources Information Center

Warner, Richard; Miller, Julia

2015-01-01

International students with English as an additional language face transitional challenges when entering a new academic culture. One such challenge involves optimising feedback to help foster their academic development, bearing in mind that feedback is not a culturally neutral entity (Nazif, A., Biswas, D., & Hilbig, R. (2004-2005). Towards an…

Zika vaccines and therapeutics: landscape analysis and challenges ahead.

PubMed

Wilder-Smith, Annelies; Vannice, Kirsten; Durbin, Anna; Hombach, Joachim; Thomas, Stephen J; Thevarjan, Irani; Simmons, Cameron P

2018-06-06

Various Zika virus (ZIKV) vaccine candidates are currently in development. Nevertheless, unique challenges in clinical development and regulatory pathways may hinder the licensure of high-quality, safe, and effective ZIKV vaccines. Implementing phase 3 efficacy trials will be difficult given the challenges of the spatio-temporal heterogeneity of ZIKV transmission, the unpredictability of ZIKV epidemics, the broad spectrum of clinical manifestations making a single definite endpoint difficult, a lack of sensitive and specific diagnostic assays, and the need for inclusion of vulnerable target populations. In addition to a vaccine, drugs for primary prophylaxis, post-exposure prophylaxis, or treatment should also be developed to prevent or mitigate the severity of congenital Zika syndrome. Establishing the feasibility of immune correlates and/or surrogates are a priority. Given the challenges in conducting phase 3 trials at a time of waning incidence, human challenge trials should be considered to evaluate efficacy. Continued financial support and engagement of industry partners will be essential to the successful development, licensure, and accessibility of Zika vaccines or therapeutics.

NASA's CubeQuest Challenge - From Ground Tournaments to Lunar and Deep Space Derby

NASA Technical Reports Server (NTRS)

Hyde, Elizabeth Lee; Cockrell, James J.

2017-01-01

The First Flight of NASA's Space Launch System will feature 13 CubeSats that will launch into cis-lunar space. Three of these CubeSats are winners of the CubeQuest Challenge, part of NASA's Space Technology Mission Directorate (STMD) Centennial Challenge Program. In order to qualify for launch on EM-1, the winning teams needed to win a series of Ground Tournaments, periodically held since 2015. The final Ground Tournament, GT-4, was held in May 2017, and resulted in the Top 3 selection for the EM-1 launch opportunity. The Challenge now proceeds to the in-space Derbies, where teams must build and test their spacecraft before launch on EM-1. Once in space, they will compete for a variety of Communications and Propulsion-based challenges. This is the first Centennial Challenge to compete in space and is a springboard for future in-space Challenges. In addition, the technologies gained from this challenge will also propel development of deep space CubeSats.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Modeling, Simulation, Additive Manufacturing, and Experimental Evaluation of Solid and Porous NiTi

NASA Astrophysics Data System (ADS)

Taheri Andani, Mohsen

In recent years, shape memory alloys (SMAs) have entered a wide range of engineering applications in fields such as aerospace and medical applications. Nickel-titanium (NiTi) is the most commonly used SMAs due to its excellent functional characteristics (shape memory effect and superelasticity behavior). These properties are based on a solid-solid phase transformation between martensite and austenite. Beside these two characteristics, low stiffness, biocompatibility and corrosion properties of NiTi make it an attractive candidate for biomedical applications (e.g., bone plates, bone screws, and vascular stents). It is well know that manufacturing and processing of NiTi is very challenging. The functional properties of NiTi are significantly affected by the impurity level and due to the high titanium content, NiTi are highly reactive. Therefore, high temperature processed parts through methods such as melting and casting which result in increased impurity levels have inadequate structural and functional properties. Furthermore, high ductility and elasticity of NiTi, adhesion, work hardening and spring back effects make machining quite challenging. These unfavorable effects for machining cause significant tool wear along with decreasing the quality of work piece. Recently, additive manufacturing (AM) has gained significant attention for manufacturing NiTi. Since AM can create a part directly from CAD data, it is predicted that AM can overcome most of the manufacturing difficulties. This technique provides the possibility of fabricating highly complex parts, which cannot be processed by any other methods. Curved holes, designed porosity, and lattice like structures are some examples of mentioned complex parts. This work investigates manufacturing superelastic NiTi by selective laser melting (SLM) technique (using PXM by Phenix/3D Systems). An extended experimental study is conducted on the effect of subsequent heat treatments with different aging conditions on phase

Treatment of oral mucositis due to chemotherapy

PubMed Central

Bagán-Sebastián, José V

2016-01-01

Introduction The management of oral mucositis is a challenge, due to its complex biological nature. Over the last 10 years, different strategies have been developed for the management of oral mucositis caused by chemotherapy in cancer patients. Material and Methods An exhaustive search was made of the PubMed-Medline, Cochrane Library and Scopus databases, crossing the key words “oral mucositis”, “prevention” and “treatment” with the terms “chemotherapy” and “radiotherapy” by means of the boolean operators “AND” and “NOT”. A total of 268 articles were obtained, of which 96 met the inclusion criteria. Results Several interventions for the prevention of oral mucositis, such as oral hygiene protocols, amifostine, benzidamine, calcium phosphate, cryotherapy and iseganan, among others, were found to yield only limited benefits. Other studies have reported a decrease in the appearance and severity of mucositis with the use of cytoprotectors (sucralfate, oral glutamine, hyaluronic acid), growth factors, topical polyvinylpyrrolidone, and low power laser irradiation. Conclusions Very few interventions of confirmed efficacy are available for the management of oral mucositis due to chemotherapy. However, according to the reviewed literature, the use of palifermin, cryotherapy and low power laser offers benefits, reducing the incidence and severity of oral mucositis – though further studies are needed to confirm the results obtained. Key words:Chemotherapy-Induced Oral Mucositis Treatment. PMID:27034762

Response of non-added solutes during nutrient addition experiments in streams

NASA Astrophysics Data System (ADS)

Rodriguez-Cardona, B.; Wymore, A.; Koenig, L.; Coble, A. A.; McDowell, W. H.

2015-12-01

Nutrient addition experiments, such as Tracer Additions for Spiraling Curve Characterization (TASCC), have become widely popular as a means to study nutrient uptake dynamics in stream ecosystems. However, the impact of these additions on ambient concentrations of non-added solutes is often overlooked. TASCC addition experiments are ideal for assessing interactions among solutes because it allows for the characterization of multiple solute concentrations across a broad range of added nutrient concentrations. TASCC additions also require the addition of a conservative tracer (NaCl) to track changes in conductivity during the experimental manipulation. Despite its use as a conservative tracer, chloride (Cl) and its associated sodium (Na) might change the concentrations of other ions and non-added nutrients through ion exchange or other processes. Similarly, additions of biologically active solutes might change the concentrations of other non-added solutes. These methodological issues in nutrient addition experiments have been poorly addressed in the literature. Here we examine the response of non-added solutes to pulse additions (i.e. TASCC) of NaCl plus nitrate (NO3-), ammonium, and phosphate across biomes including temperate and tropical forests, and arctic taiga. Preliminary results demonstrate that non-added solutes respond to changes in the concentration of these added nutrients. For example, concentrations of dissolved organic nitrogen (DON) in suburban headwater streams of New Hampshire both increase and decrease in response to NO3- additions, apparently due to biotic processes. Similarly, cations such as potassium, magnesium, and calcium also increase during TASCC experiments, likely due to cation exchange processes associated with Na addition. The response of non-added solutes to short-term pulses of added nutrients and tracers needs to be carefully assessed to ensure that nutrient uptake metrics are accurate, and to detect biotic interactions that may

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

The NASA Centennial Challenges prize, level one, is presented to team Mountaineers for successfully completing level one of the NASA 2014 Sample Return Robot Challenge, from left, Ryan Watson, Team Mountaineers; Lucas Behrens, Team Mountaineers; Jarred Strader, Team Mountaineers; Yu Gu, Team Mountaineers; Scott Harper, Team Mountaineers; Dorothy Rasco, NASA Deputy Associate Administrator for the Space Technology Mission Directorate; Laurie Leshin, Worcester Polytechnic Institute (WPI) President; David Miller, NASA Chief Technologist; Alexander Hypes, Team Mountaineers; Nick Ohi,Team Mountaineers; Marvin Cheng, Team Mountaineers; Sam Ortega, NASA Program Manager for Centennial Challenges; and Tanmay Mandal, Team Mountaineers;, Saturday, June 14, 2014, at Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team Mountaineers was the only team to complete the level one challenge. During the competition, teams were required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge was to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

29 CFR 1620.33 - Recovery of wages due; injunctions; penalties for willful violations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 4 2013-07-01 2013-07-01 false Recovery of wages due; injunctions; penalties for willful... OPPORTUNITY COMMISSION THE EQUAL PAY ACT § 1620.33 Recovery of wages due; injunctions; penalties for willful... overtime compensation under the FLSA. This is true both of the additional wages required by the Act to be...

29 CFR 1620.33 - Recovery of wages due; injunctions; penalties for willful violations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 4 2012-07-01 2012-07-01 false Recovery of wages due; injunctions; penalties for willful... OPPORTUNITY COMMISSION THE EQUAL PAY ACT § 1620.33 Recovery of wages due; injunctions; penalties for willful... overtime compensation under the FLSA. This is true both of the additional wages required by the Act to be...

29 CFR 1620.33 - Recovery of wages due; injunctions; penalties for willful violations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 4 2011-07-01 2011-07-01 false Recovery of wages due; injunctions; penalties for willful... OPPORTUNITY COMMISSION THE EQUAL PAY ACT § 1620.33 Recovery of wages due; injunctions; penalties for willful... overtime compensation under the FLSA. This is true both of the additional wages required by the Act to be...

29 CFR 1620.33 - Recovery of wages due; injunctions; penalties for willful violations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 4 2014-07-01 2014-07-01 false Recovery of wages due; injunctions; penalties for willful... OPPORTUNITY COMMISSION THE EQUAL PAY ACT § 1620.33 Recovery of wages due; injunctions; penalties for willful... overtime compensation under the FLSA. This is true both of the additional wages required by the Act to be...

Process Control and Development for Ultrasonic Additive Manufacturing with Embedded Fibers

NASA Astrophysics Data System (ADS)

Hehr, Adam J.

Ultrasonic additive manufacturing (UAM) is a recent additive manufacturing technology which combines ultrasonic metal welding, CNC machining, and mechanized foil layering to create large gapless near net-shape metallic parts. The process has been attracting much attention lately due to its low formation temperature, the capability to join dissimilar metals, and the ability to create complex design features not possible with traditional subtractive processes alone. These process attributes enable light-weighting of structures and components in an unprecedented way. However, UAM is currently limited to niche areas due to the lack of quality tracking and inadequate scientific understanding of the process. As a result, this thesis work is focused on improving both component quality tracking and process understanding through the use of average electrical power input to the welder. Additionally, the understanding and application space of embedding fibers into metals using UAM is investigated, with particular focus on NiTi shape memory alloy fibers.

Additives

NASA Technical Reports Server (NTRS)

Smalheer, C. V.

1973-01-01

The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

Effects of a recombinant complement component C3b functional fragment α2MR (α2-macroglobulin receptor) additive on the immune response of juvenile orange-spotted grouper (Epinephelus coioides) after the exposure to cold shock challenge.

PubMed

Luo, Sheng-Wei; Cai, Luo; Qi, Zeng-Hua; Wang, Cong; Liu, Yuan; Wang, Wei-Na

2015-08-01

The effects of Ec-α2MR (Epinephelus coiodes-α2-macroglobulin receptor) on growth performance, enzymatic activity, respiratory burst, MDA level, total antioxidant capacity, DPPH radical scavenging percentage and immune-related gene expressions of the juvenile orange-spotted grouper were evaluated. The commercial diet supplemented with α2MR additive was used to feed the orange-spotted grouper for six weeks. Although a slight increase was observed in the specific growth rate, survival rate and weight gain, no significance was observed among different group. After the feeding trial, the groupers were exposed to cold stress. Respiratory burst activity and MDA level decreased significantly in α2MR additive group by comparing with the control and additive control group, while a sharp increase of ACP activity, ALP activity, total antioxidant capacity and DPPH radial scavenging percentage was observed in α2MR additive group. qRT-PCR analyses confirmed that the up-regulated mRNA expressions of C3, TNF1, TNF2, IL-6, CTL, LysC, SOD1 and SOD2 were observed in α2MR additive group at 20 °C. These results showed that α2MR additive may moderate the immune response in grouper following cold shock challenge. Copyright © 2015 Elsevier Ltd. All rights reserved.

How are things adding up? Neural differences between arithmetic operations are due to general problem solving strategies.

PubMed

Tschentscher, Nadja; Hauk, Olaf

2014-05-15

A number of previous studies have interpreted differences in brain activation between arithmetic operation types (e.g. addition and multiplication) as evidence in favor of distinct cortical representations, processes or neural systems. It is still not clear how differences in general task complexity contribute to these neural differences. Here, we used a mental arithmetic paradigm to disentangle brain areas related to general problem solving from those involved in operation type specific processes (addition versus multiplication). We orthogonally varied operation type and complexity. Importantly, complexity was defined not only based on surface criteria (for example number size), but also on the basis of individual participants' strategy ratings, which were validated in a detailed behavioral analysis. We replicated previously reported operation type effects in our analyses based on surface criteria. However, these effects vanished when controlling for individual strategies. Instead, procedural strategies contrasted with memory retrieval reliably activated fronto-parietal and motor regions, while retrieval strategies activated parietal cortices. This challenges views that operation types rely on partially different neural systems, and suggests that previously reported differences between operation types may have emerged due to invalid measures of complexity. We conclude that mental arithmetic is a powerful paradigm to study brain networks of abstract problem solving, as long as individual participants' strategies are taken into account. Copyright © 2014 Elsevier Inc. All rights reserved.

Challenges and opportunities for heavy scalar searches in the tt¯ channel at the LHC

DOE PAGES

Carena, Marcela; Liu, Zhen

2016-11-25

Heavy scalar and pseudoscalar resonance searches through themore » $$gg\\rightarrow S\\rightarrow t\\bar t$$ process are challenging due to the peculiar behavior of the large interference effects with the standard model $$t\\bar t$$ background. Such effects generate non-trivial lineshapes from additional relative phases between the signal and background amplitudes. We provide the analytic expressions for the differential cross sections to understand the interference effects in the heavy scalar signal lineshapes. We extend our study to the case of CP-violation and further consider the effect of bottom quarks in the production and decay processes. We also evaluate the contributions from additional particles to the gluon fusion production process, such as stops and vector-like quarks, that could lead to significant changes in the behavior of the signal lineshapes. Taking into account the large interference effects, we perform lineshape searches at the LHC and discuss the importance of the systematic uncertainties and smearing effects. Lastly, we present projected sensitivities for two LHC performance scenarios to probe the $$gg\\rightarrow S \\rightarrow t\\bar t$$ channel in various models.« less

Microbiome therapeutics - Advances and challenges.

PubMed

Mimee, Mark; Citorik, Robert J; Lu, Timothy K

2016-10-01

The microbial community that lives on and in the human body exerts a major impact on human health, from metabolism to immunity. In order to leverage the close associations between microbes and their host, development of therapeutics targeting the microbiota has surged in recent years. Here, we discuss current additive and subtractive strategies to manipulate the microbiota, focusing on bacteria engineered to produce therapeutic payloads, consortia of natural organisms and selective antimicrobials. Further, we present challenges faced by the community in the development of microbiome therapeutics, including designing microbial therapies that are adapted for specific geographies in the body, stable colonization with microbial therapies, discovery of clinically relevant biosensors, robustness of engineered synthetic gene circuits and addressing safety and biocontainment concerns. Moving forward, collaboration between basic and applied researchers and clinicians to address these challenges will poise the field to herald an age of next-generation, cellular therapies that draw on novel findings in basic research to inform directed augmentation of the human microbiota. Copyright © 2016. Published by Elsevier B.V.

Vaccinology in the third millennium: scientific and social challenges

PubMed Central

Poland, Gregory A.; Whitaker, Jennifer A.; Poland, Caroline M.; Ovsyannikova, Inna G.; Kennedy, Richard B.

2016-01-01

The epidemiology of deaths due to vaccine-preventable diseases has been significantly and positively altered through the use of vaccines. Despite this, significant challenges remain in vaccine development and use in the third millennium. Both new (Ebola, Chikungunya, West Nile) and re-emerging diseases (measles, mumps, influenza) require the development of new or next-generation vaccines. The global aging of the population, and accumulating numbers of immunocompromised persons, will require new vaccine and adjuvant development to protect large segments of the population. After vaccine development, significant challenges remain globally in the cost and efficient use and acceptance of vaccines by the public. This article raises issues in these two areas and suggests a way forward that will benefit current and future generations. PMID:27039875

Cutaneous basophil anaphylaxis. Immediate vasopermeability increases and anaphylactic degranulation of basophils at delayed hypersensitivity reactions challenged with additional antigen.

PubMed Central

Askenase, P W; Debernardo, R; Tauben, D; Kashgarian, M

1978-01-01

Many delayed-type reactions contain large infiltrates of basophils whose function is unknown. We have studied these cutaneous basophil hypersensitivity (CBH) reactions in guinea-pigs to ascertain whether basophils that are recruited to delayed reaction sites could be triggered for immediate reactivity. We compared 24 h CBH reactions with nearby skin for immediate hypersensitivity by challenging each site with small amounts of antigen. CBH sites had augmented immediate increases in vascular permeability detected by extravasation of Evan's blue dye. The ability to elicit this augmented anaphylactic phenomenon correlated with the local presence of basophils, and light microscopy at CBH reactions 15 min after antigen challenge showed a 50% decline in basophil counts. Electron microscopy showed that progressive anaphylactic-type degranulation of local basophils occurred within minutes following reintroduction of antigen. There was fusion of vacuoles containing granules, exocytosis of granules, and dissolution of granules, without ultrastructural disruption of cellular integrity. These results establish that basophils in CBH reactions can be triggered with soluble antigen to undergo anaphylactic degranulation, with the immediate release of vasoactive mediators. We have termed this phenomenon 'cutaneous basophil anaphylaxis'. Thus, one function of basophils at sites of delayed hypersensitivity may be to provide the potential for augmented, local, immediate anaphylactic reactivity. Images Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 PMID:721140

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Team KuuKulgur watches as their robots attempt the level one competition during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

The scope of additive manufacturing in cryogenics, component design, and applications

NASA Astrophysics Data System (ADS)

Stautner, W.; Vanapalli, S.; Weiss, K.-P.; Chen, R.; Amm, K.; Budesheim, E.; Ricci, J.

2017-12-01

Additive manufacturing techniques using composites or metals are rapidly gaining momentum in cryogenic applications. Small or large, complex structural components are now no longer limited to mere design studies but can now move into the production stream thanks to new machines on the market that allow for light-weight, cost optimized designs with short turnaround times. The potential for cost reductions from bulk materials machined to tight tolerances has become obvious. Furthermore, additive manufacturing opens doors and design space for cryogenic components that to date did not exist or were not possible in the past, using bulk materials along with elaborate and expensive machining processes, e.g. micromachining. The cryogenic engineer now faces the challenge to design toward those new additive manufacturing capabilities. Additionally, re-thinking designs toward cost optimization and fast implementation also requires detailed knowledge of mechanical and thermal properties at cryogenic temperatures. In the following we compile the information available to date and show a possible roadmap for additive manufacturing applications of parts and components typically used in cryogenic engineering designs.

Developing the medicinal plants sector in northern India: challenges and opportunities

PubMed Central

Kala, Chandra Prakash; Dhyani, Pitamber Prasad; Sajwan, Bikram Singh

2006-01-01

The medicinal properties of plant species have made an outstanding contribution in the origin and evolution of many traditional herbal therapies. These traditional knowledge systems have started to disappear with the passage of time due to scarcity of written documents and relatively low income in these traditions. Over the past few years, however, the medicinal plants have regained a wide recognition due to an escalating faith in herbal medicine in view of its lesser side effects compared to allopathic medicine in addition the necessity of meeting the requirements of medicine for an increasing human population. Through the realization of the continuous erosion of traditional knowledge of plants used for medicine in the past and the renewed interest at the present time, a need existed to review this valuable knowledge of medicinal plants with the purpose of developing medicinal plants sectors across the different states in India. Our major objectives therefore were to explore the potential in medicinal plants resources, to understand the challenges and opportunities with the medicinal plants sector, and also to suggest recommendations based upon the present state of knowledge for the establishment and smooth functioning of the medicinal plants sector along with improving the living standards of the underprivileged communities. The review reveals that northern India harbors a rich diversity of valuable medicinal plants, and attempts are being made at different levels for sustainable utilization of this resource in order to develop the medicinal plants sector.

Poverty in Eritrea: challenges and implications for development.

PubMed

Rena, Ravinder

2009-01-01

Poverty, one of the world's most serious problems, is particularly severe in Africa. Eritrea is a 16-year-old nation that gained its independence from Ethiopia in 1993. The country's economy was doing relatively well between 1993 and 1997. Eritrea was then exposed to numerous challenges such as drought, famines and recurrent war. As a result, poverty has become more rampant in a country where over 66 per cent of people live below the poverty line. Some families live on remittances. The government has taken some poverty alleviation measures. However, it has not mitigated poverty due to a lack of resources and a poorly implemented poverty alleviation programme. This article attempts to explore the incidence of poverty. It also provides details of poverty surveys that have been conducted since independence. It discusses various poverty challenges and provides some policy implications for development.

Challenges Experienced by Japanese Students with Oral Communication Skills in Australian Universities

ERIC Educational Resources Information Center

Yanagi, Miho; Baker, Amanda A.

2016-01-01

Due to ever-increasing demands to acquire effective communicative abilities in the English language, increasing numbers of international students choose to study in Western tertiary institutions; however, they frequently encounter difficulties in performing satisfactorily in English. This study aims to identify specific challenges that Japanese…

The relationship between challenging parenting behaviour and childhood anxiety disorders.

PubMed

Lazarus, Rebecca S; Dodd, Helen F; Majdandžić, Mirjana; de Vente, Wieke; Morris, Talia; Byrow, Yulisha; Bögels, Susan M; Hudson, Jennifer L

2016-01-15

This research investigates the relationship between challenging parenting behaviour and childhood anxiety disorders proposed by Bögels and Phares (2008). Challenging parenting behaviour involves the playful encouragement of children to go beyond their own limits, and may decrease children's risk for anxiety (Bögels and Phares, 2008). Parents (n=164 mothers and 144 fathers) of 164 children aged between 3.4 and 4.8 years participated in the current study. A multi-method, multi-informant assessment of anxiety was used, incorporating data from diagnostic interviews as well as questionnaire measures. Parents completed self-report measures of their parenting behaviour (n=147 mothers and 138 fathers) and anxiety (n=154 mothers and 143 fathers). Mothers reported on their child's anxiety via questionnaire as well as diagnostic interview (n=156 and 164 respectively). Of these children, 74 met criteria for an anxiety disorder and 90 did not. Fathers engaged in challenging parenting behaviour more often than mothers. Both mothers' and fathers' challenging parenting behaviour was associated with lower report of child anxiety symptoms. However, only mothers' challenging parenting behaviour was found to predict child clinical anxiety diagnosis. Shared method variance from mothers confined the interpretation of these results. Moreover, due to study design, it is not possible to delineate cause and effect. The finding with respect to maternal challenging parenting behaviour was not anticipated, prompting replication of these results. Future research should investigate the role of challenging parenting behaviour by both caregivers as this may have implications for parenting interventions for anxious children. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Social Justice: A Long-Term Challenge for Counseling Psychology

ERIC Educational Resources Information Center

Ivey, Allen E.; Collins, Noah M.

2003-01-01

Counseling psychology has a long history of interest and commitment to social justice and multicultural issues. This article discusses some of that history and, in addition, speaks to specifics of implementing a liberation psychology frame of reference into clinical practice along with the issues of implementation and challenges faced by those of…

Planning Lessons for Refugee-Background Students: Challenges and Strategies

ERIC Educational Resources Information Center

Miller, Jennifer; Windle, Joel Austin; Yazdanpanah, Lilly K.

2014-01-01

This article examines the ways teachers plan lessons for English as an Additional Language (EAL) students from refugee backgrounds in secondary school transition programs. Based on a study of teachers working with students in three Victorian schools, we identify the key challenges teachers face in planning and the strategies they adopt to confront…

Tackling the challenges of matching biomedical ontologies.

PubMed

Faria, Daniel; Pesquita, Catia; Mott, Isabela; Martins, Catarina; Couto, Francisco M; Cruz, Isabel F

2018-01-15

Biomedical ontologies pose several challenges to ontology matching due both to the complexity of the biomedical domain and to the characteristics of the ontologies themselves. The biomedical tracks in the Ontology Matching Evaluation Initiative (OAEI) have spurred the development of matching systems able to tackle these challenges, and benchmarked their general performance. In this study, we dissect the strategies employed by matching systems to tackle the challenges of matching biomedical ontologies and gauge the impact of the challenges themselves on matching performance, using the AgreementMakerLight (AML) system as the platform for this study. We demonstrate that the linear complexity of the hash-based searching strategy implemented by most state-of-the-art ontology matching systems is essential for matching large biomedical ontologies efficiently. We show that accounting for all lexical annotations (e.g., labels and synonyms) in biomedical ontologies leads to a substantial improvement in F-measure over using only the primary name, and that accounting for the reliability of different types of annotations generally also leads to a marked improvement. Finally, we show that cross-references are a reliable source of information and that, when using biomedical ontologies as background knowledge, it is generally more reliable to use them as mediators than to perform lexical expansion. We anticipate that translating traditional matching algorithms to the hash-based searching paradigm will be a critical direction for the future development of the field. Improving the evaluation carried out in the biomedical tracks of the OAEI will also be important, as without proper reference alignments there is only so much that can be ascertained about matching systems or strategies. Nevertheless, it is clear that, to tackle the various challenges posed by biomedical ontologies, ontology matching systems must be able to efficiently combine multiple strategies into a mature matching

Quantum sequencing: opportunities and challenges

NASA Astrophysics Data System (ADS)

di Ventra, Massimiliano

Personalized or precision medicine refers to the ability of tailoring drugs to the specific genome and transcriptome of each individual. It is however not yet feasible due the high costs and slow speed of present DNA sequencing methods. I will discuss a sequencing protocol that requires the measurement of the distributions of transverse tunneling currents during the translocation of single-stranded DNA into nanochannels. I will show that such a quantum sequencing approach can reach unprecedented speeds, without requiring any chemical preparation, amplification or labeling. I will discuss recent experiments that support these theoretical predictions, the advantages of this approach over other sequencing methods, and stress the challenges that need to be overcome to render it commercially viable.

Fired up or burned out? How developmental challenge differentially impacts leader behavior.

PubMed

Courtright, Stephen H; Colbert, Amy E; Choi, Daejeong

2014-07-01

Leadership development research has largely drawn on experiential and enactive learning theories to explore the positive effects of developmental challenge on leaders. In contrast, we examined potential positive and negative effects of developmental challenge (i.e., challenging job assignments) on leader behavior through an alternative theoretical lens--transactional stress theory. We predicted, on one hand, that developmental challenge may be associated with higher leader engagement and transformational leadership behavior; however, developmental challenge also has the potential to be associated with higher leader emotional exhaustion and laissez-faire leadership behavior. We further proposed that leadership self-efficacy (LSE) moderates these potential effects of developmental challenge and helps explain why leaders react either positively or negatively to developmental challenge. We tested our hypotheses in a sample of 153 leaders and 631 direct reports at a Fortune 500 company. Findings supported positive relationships among developmental challenge, leader engagement, and transformational leadership. However, we also found support for significant relationships among developmental challenge, emotional exhaustion, and laissez-faire leadership. Additionally, leaders lower in LSE were more likely to encounter the negative effects of developmental challenge by experiencing increased emotional exhaustion and displaying laissez-faire leadership behaviors. Our study contributes to theory and practice by elucidating a "dark side" of developmental challenge, identifying LSE as a moderator of the negative effects of developmental challenge, identifying antecedents of transformational and laissez-faire leadership behaviors, and investigating demands and stress in leadership roles.

Due diligence responsibilities of the professional geologist

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hobbs, G.W.

1991-03-01

Whether in the role of independent consultant or company employee, a geologist has certain professional obligations in the evaluation of an oil and gas submittal from a third party. 'Due diligence' is the term used to describe the analysis of an investment opportunity. Due diligence involves a multidisciplinary examination of both the technical and business aspects of a submittal. In addition to the obvious geological considerations, prospect evaluations should include relevant details about the specific technical documentation reviewed, information sources, and how the data were verified. Full disclosure of ownership, technical risks, and negative aspects of the prospect should bemore » included along with the positive elements. After the geological analysis is completed, the economic merits of the prospect should be analyzed, incorporating all lease burdens and terms of participation into the calculations. Estimated exploration, development, and operating costs, together with projected annual production, cash flow, and reserves must be examined as to their reasonableness. Finally, the due diligence review should include a thorough check on the reputation, financial condition, technical and managerial expertise, and prior track record of the operator. Bank, trade, legal, and prior partner references should be contacted. The successful professional geologist in today's competitive world must have multidisciplinary skills. A solid background in geology and geophysics, a basic understanding of the principles of petroleum engineering and economics, and the wits of a private eye are needed for good due diligence work.« less

Comparison of NIRS, laser Doppler flowmetry, photoplethysmography, and pulse oximetry during vascular occlusion challenges.

PubMed

Abay, T Y; Kyriacou, P A

2016-04-01

Monitoring changes in blood volume, blood flow, and oxygenation in tissues is of vital importance in fields such as reconstructive surgery and trauma medicine. Near infrared spectroscopy (NIRS), laser Doppler (LDF) flowmetry, photoplethysmography (PPG), and pulse oximetry (PO) contribute to such fields due to their safe and noninvasive nature. However, the techniques have been rarely investigated simultaneously or altogether. The aim of this study was to investigate all the techniques simultaneously on healthy subjects during vascular occlusion challenges. Sensors were attached on the forearm (NIRS and LDF) and fingers (PPG and PO) of 19 healthy volunteers. Different degrees of vascular occlusion were induced by inflating a pressure cuff on the upper arm. The responses of tissue oxygenation index (NIRS), tissue haemoglobin index (NIRS), flux (LDF), perfusion index (PPG), and arterial oxygen saturation (PO) have been recorded and analyzed. Moreover, the optical densities were calculated from slow varying dc PPG, in order to distinguish changes in venous blood volumes. The indexes showed significant changes (p  <  0.05) in almost all occlusions, either venous or over-systolic occlusions. However, differentiation between venous and arterial occlusion by LDF may be challenging and the perfusion index (PI) may not be adequate to indicate venous occlusions. Optical densities may be an additional tool to detect venous occlusions by PPG.

Microbiome Therapeutics – Advances and Challenges

PubMed Central

Mimee, Mark; Citorik, Robert J.; Lu, Timothy K.

2016-01-01

The microbial community that lives on and in the human body exerts a major impact on human health, from metabolism to immunity. In order to leverage the close associations between microbes and their host, development of therapeutics targeting the microbiota has surged in recent years. Here, we discuss current additive and subtractive strategies to manipulate the microbiota, focusing on bacteria engineered to produce therapeutic payloads, consortia of natural organisms and selective antimicrobials. Further, we present challenges faced by the community in the development of microbiome therapeutics, including designing microbial therapies that are adapted for specific geographies in the body, stable colonization with microbial therapies, discovery of clinically relevant biosensors, robustness of engineered synthetic gene circuits and addressing safety and biocontainment concerns. Moving forward, collaboration between basic and applied researchers and clinicians to address these challenges will poise the field to herald an age of next-generation, cellular therapies that draw on novel findings in basic research to inform directed augmentation of the human microbiota. PMID:27158095

Factors Influencing Men Entering the Nursing Profession, and Understanding the Challenges Faced by Them: Iranian and Developed Countries’ Perspectives

PubMed Central

Zamanzadeh, Vahid; Valizadeh, Leila; Negarandeh, Reza; Monadi, Morteza; Azadi, Arman

2013-01-01

Context: Men entering the nursing profession have been investigated from several different perspectives. Due to male gender characteristics and existing public image, nursing is often not considered as a career choice by men. Whether nursing would benefit from increased number of men is a key question in the literature. The purpose of this integrative review of the literature was to identify factors influencing men to enter the nursing profession. In addition, it sought to understand the challenges they are confronted within this profession. Evidence Acquisition: A systematic search of the existing literature was performed using an Internet search with broad keywords to access related articles in both Persian and English databases. Finally, 34 studies (written between 2000 and early 2013) were selected and surveyed. Results: Most of the studies were conducted in developed counties. The review identified reasons why males choose nursing, and other challenges facing men entering and working in nursing. Themes that emerged from the literature include educational and societal barriers experienced by men in nursing, recruitment, career choice, and role strain. Conclusions: Regarding men’s influences on professional development, and also the importance of gender-based caring, policies for recruitment and retention of men in nursing must be followed hastily. However, there is a need for further research regarding the challenges faced by men entering nursing, in both Iran and other developing countries. PMID:25414879

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-10

A team KuuKulgur Robot from Estonia is seen on the practice field during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Tuesday, June 10, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team KuuKulgur is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Worcester Polytechnic Institute (WPI) President Laurie Leshin, speaks at a breakfast opening the TouchTomorrow Festival, held in conjunction with the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The team AERO robot drives off the starting platform during the level one competition at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

David Miller, NASA Chief Technologist, speaks at a breakfast opening the TouchTomorrow Festival, held in conjunction with the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

The Oregon State University Mars Rover Team's robot is seen during level one competition at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-10

Jerry Waechter of team Middleman from Dunedin, Florida, works on their robot named Ro-Bear during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Tuesday, June 10, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team Middleman is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Members of the Oregon State University Mars Rover Team prepare their robot to attempt the level one competition at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

18 CFR 367.59 - Additions and retirements of property.

Code of Federal Regulations, 2012 CFR

2012-04-01

... relatively large number or related small cost, an appropriate average book cost of the units, with due... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Additions and retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY...

18 CFR 367.59 - Additions and retirements of property.

Code of Federal Regulations, 2011 CFR

2011-04-01

... relatively large number or related small cost, an appropriate average book cost of the units, with due... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additions and retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY...

18 CFR 367.59 - Additions and retirements of property.

Code of Federal Regulations, 2014 CFR

2014-04-01

... relatively large number or related small cost, an appropriate average book cost of the units, with due... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Additions and retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY...

18 CFR 367.59 - Additions and retirements of property.

Code of Federal Regulations, 2010 CFR

2010-04-01

... relatively large number or related small cost, an appropriate average book cost of the units, with due... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additions and retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY...

18 CFR 367.59 - Additions and retirements of property.

Code of Federal Regulations, 2013 CFR

2013-04-01

... relatively large number or related small cost, an appropriate average book cost of the units, with due... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Additions and retirements of property. 367.59 Section 367.59 Conservation of Power and Water Resources FEDERAL ENERGY...

Challenges facing effective implementation of co-trimoxazole prophylaxis in children born to HIV-infected mothers in the public health facilities.

PubMed

Kamuhabwa, Appolinary Ar; Manyanga, Vicky

2015-01-01

If children born to HIV-infected mothers are not identified early, approximately 30% of them will die within the first year of life due to opportunistic infections. In order to prevent morbidity and mortality due to opportunistic infections in children, the World Health Organization recommends the use of prophylaxis using co-trimoxazole. However, the challenges affecting effective implementation of this policy in Tanzania have not been documented. In this study, we assessed the challenges facing the provision of co-trimoxazole prophylaxis among children born to HIV-infected mothers in the public hospitals of Dar es Salaam, Tanzania. Four hundred and ninety-eight infants' PMTCT (Prevention of Mother-to-Child Transmission of HIV) register books for the past 2 years were reviewed to obtain information regarding the provision of co-trimoxazole prophylaxis. One hundred and twenty-six health care workers were interviewed to identify success stories and challenges in the provision of co-trimoxazole prophylaxis in children. In addition, 321 parents and guardians of children born to HIV-infected mothers were interviewed in the health facilities. Approximately 80% of children were initiated with co-trimoxazole prophylaxis within 2 months after birth. Two hundred and ninety-one (58.4%) children started using co-trimoxazole within 4 weeks after birth. Majority (n=458, 91.8%) of the children were prescribed 120 mg of co-trimoxazole per day, whereas 39 (7.8%) received 240 mg per day. Only a small proportion (n=1, 0.2%) of children received 480 mg/day. Dose determination was based on the child's age rather than body weight. Parents and guardians reported that 42 (13.1%) children had missed one or more doses of co-trimoxazole during the course of prophylaxis. The majority of health care workers (89.7%) reported that co-trimoxazole is very effective for the prevention of opportunistic infections among children, but frequent shortage of co-trimoxazole in the health facilities was

Galantamine is a novel post-exposure therapeutic against lethal VX challenge.

PubMed

Hilmas, Corey J; Poole, Melissa J; Finneran, Kathryn; Clark, Matthew G; Williams, Patrick T

2009-10-15

The ability of galantamine hydrobromide (GAL HBr) treatment to antagonize O-ethyl-S-(2-diisopropylaminoethyl) methylphosphonothiolate (VX)-induced lethality, impairment of muscle tension, and electroencephalographic (EEG) changes was assessed in guinea pigs. Guinea pigs were challenged with 16.8 microg/kg VX (2LD50). One min after challenge, animals were administered 0.5 mg/kg atropine sulfate (ATR) and 25 mg/kg pyridine-2-aldoxime methochloride (2-PAM). In addition, guinea pigs were given 0, 1, 2, 4, 8 or 10 mg/kg GAL as a post-exposure treatment immediately prior to ATR and 2-PAM. Animals were either monitored for 24-h survival, scheduled for electroencephalography (EEG) recording, or euthanized 60 min later for measurement of indirectly-elicited muscle tension in the hemidiaphragm. Post-exposure GAL therapy produced a dose-dependent increase in survival from lethal VX challenge. Optimal clinical benefits were observed in the presence of 10 mg/kg GAL, which led to 100% survival of VX-challenged guinea pigs. Based on muscle physiology studies, GAL post-exposure treatment protected the guinea pig diaphragm, the major effector muscle of respiration, from fatigue, tetanic fade, and muscular paralysis. Protection against the paralyzing effects of VX was dose-dependent. In EEG studies, GAL did not alter seizure onset for all doses tested. At the highest dose tested (10 mg/kg), GAL decreased seizure duration when administered as a post-exposure treatment 1 min after VX. GAL also reduced the high correlation associated between seizure activity and lethality after 2LD50 VX challenge. GAL may have additional benefits both centrally and peripherally that are unrelated to its established mechanism as a reversible acetylcholinesterase inhibitor (AChEI).

15 CFR 90.10 - Form of formal challenge and time limit for filing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE PROCEDURE FOR CHALLENGING CERTAIN POPULATION... Chief, Population Division, during the informal stage, and shall include any additional relevant...

15 CFR 90.10 - Form of formal challenge and time limit for filing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE PROCEDURE FOR CHALLENGING CERTAIN POPULATION... Chief, Population Division, during the informal stage, and shall include any additional relevant...

15 CFR 90.10 - Form of formal challenge and time limit for filing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE PROCEDURE FOR CHALLENGING CERTAIN POPULATION... Chief, Population Division, during the informal stage, and shall include any additional relevant...

15 CFR 90.10 - Form of formal challenge and time limit for filing.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE PROCEDURE FOR CHALLENGING CERTAIN POPULATION... Chief, Population Division, during the informal stage, and shall include any additional relevant...

Long-term nitrogen addition leads to loss of species richness due to litter accumulation and soil acidification in a temperate steppe.

PubMed

Fang, Ying; Xun, Fen; Bai, Wenming; Zhang, Wenhao; Li, Linghao

2012-01-01

Although community structure and species richness are known to respond to nitrogen fertilization dramatically, little is known about the mechanisms underlying specific species replacement and richness loss. In an experiment in semiarid temperate steppe of China, manipulative N addition with five treatments was conducted to evaluate the effect of N addition on the community structure and species richness. Species richness and biomass of community in each plot were investigated in a randomly selected quadrat. Root element, available and total phosphorus (AP, TP) in rhizospheric soil, and soil moisture, pH, AP, TP and inorganic N in the soil were measured. The relationship between species richness and the measured factors was analyzed using bivariate correlations and stepwise multiple linear regressions. The two dominant species, a shrub Artemisia frigida and a grass Stipa krylovii, responded differently to N addition such that the former was gradually replaced by the latter. S. krylovii and A. frigida had highly-branched fibrous and un-branched tap root systems, respectively. S. krylovii had higher height than A. frigida in both control and N added plots. These differences may contribute to the observed species replacement. In addition, the analysis on root element and AP contents in rhizospheric soil suggests that different calcium acquisition strategies, and phosphorus and sodium responses of the two species may account for the replacement. Species richness was significantly reduced along the five N addition levels. Our results revealed a significant relationship between species richness and soil pH, litter amount, soil moisture, AP concentration and inorganic N concentration. Our results indicate that litter accumulation and soil acidification accounted for 52.3% and 43.3% of the variation in species richness, respectively. These findings would advance our knowledge on the changes in species richness in semiarid temperate steppe of northern China under N

Electrolyte additives for lithium metal anodes and rechargeable lithium metal batteries: progresses and perspectives.

PubMed

Zhang, Heng; Eshetu, Gebrekidan Gebresilassie; Judez, Xabier; Li, Chunmei; Rodriguez-Martínez, Lide M; Armand, Michel

2018-02-14

Lithium metal (Li°) - based rechargeable batteries (LMBs), such as Li° anode vs. intercalation and/or conversion type cathode batteries, lithium-sulphur (Li-S), and lithium-oxygen (O2)/air (Li-O2/air) are becoming increasingly important for electrifying the modern transportation system, enabling sustainable mobility in the near future. Though some rechargeable LMBs batteries (e.g., Li°/LiFePO4 batteries from Bolloré Bluecar®, Li-S batteries from OXIS Energy and Sion Power) are already commercially viable in niche applications, their large-scale deployment is still hampered due to the existence of a number of formidable challenges, including lithium dendrite growth, electrolyte instability towards high voltage intercalation type cathode, poor electronic and ionic conductivities of sulphur (S8) and O2, as well as their corresponding reduction products (e.g., Li2S and Li2O), dissolution and shuttling of polysulphide (PS) intermediates etc. This ultimately results in short cycle life, low coulombic/energy efficiency, poor safety, and a high self-discharge rate. Among other mitigating strategies, the use of electrolyte additives is considered as one of the most economical, and effective approach for circumventing these dilemmas. Set out to offer an in-depth insight into the rapidly growing research on the account of electrolyte additives for rechargeable LMBs, this review presents an overview of the various functional additives, that are being applied in Li-anode/intercalation cathode-based, Li-S and Li-O2 batteries. This review is believed to assess the status quo of the research and thereby arouse new thoughts and opportunities, opening new avenues for the practical realization of these appealing devices. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Additive effects due to biochar and endophyte application enable soybean to enhance nutrient uptake and modulate nutritional parameters* #

PubMed Central

Waqas, Muhammad; Kim, Yoon-Ha; Khan, Abdul Latif; Shahzad, Raheem; Asaf, Sajjad; Hamayun, Muhammad; Kang, Sang-Mo; Khan, Muhammad Aaqil; Lee, In-Jung

2017-01-01

We studied the effects of hardwood-derived biochar (BC) and the phytohormone-producing endophyte Galactomyces geotrichum WLL1 in soybean (Glycine max (L.) Merr.) with respect to basic, macro-and micronutrient uptakes and assimilations, and their subsequent effects on the regulation of functional amino acids, isoflavones, fatty acid composition, total sugar contents, total phenolic contents, and 1,1-diphenyl-2-picrylhydrazyl (DPPH)-scavenging activity. The assimilation of basic nutrients such as nitrogen was up-regulated, leaving carbon, oxygen, and hydrogen unaffected in BC+G. geotrichum-treated soybean plants. In comparison, the uptakes of macro-and micronutrients fluctuated in the individual or co-application of BC and G. geotrichum in soybean plant organs and rhizospheric substrate. Moreover, the same attribute was recorded for the regulation of functional amino acids, isoflavones, fatty acid composition, total sugar contents, total phenolic contents, and DPPH-scavenging activity. Collectively, these results showed that BC+G. geotrichum-treated soybean yielded better results than did the plants treated with individual applications. It was concluded that BC is an additional nutriment source and that the G. geotrichum acts as a plant biostimulating source and the effects of both are additive towards plant growth promotion. Strategies involving the incorporation of BC and endophytic symbiosis may help achieve eco-friendly agricultural production, thus reducing the excessive use of chemical agents. PMID:28124840

Shuttle 'Challenger' aerodynamic performance from flight data - Comparisons with predicted values and 'Columbia' experience

NASA Technical Reports Server (NTRS)

Findlay, J. T.; Kelly, G. M.; Mcconnell, J. G.; Compton, H. R.

1984-01-01

Longitudinal aerodynamic performance comparisons between flight extracted and predicted values are presented for the first eight NASA Space Shuttle entry missions. Challenger results are correlated with the ensemble five flight Columbia experience and indicate effects due to differing angle-of-attack and body flap deflection profiles. An Appendix is attached showing the results of each flight using both the LaRC LAIRS and NOAA atmospheres. Discussions are presented which review apparent density anomalies observed in the flight data, with particular emphasis on the suggested shears and turbulence encountered during STS-2 and STS-4. Atmospheres derived from Shuttle data are presented which show structure different than that remotely sensed and imply regions of unstable air masses as a plausible explanation. Though additional aerodynamic investigations are warranted, an added benefit of Shuttle flight data for atmospheric research is discussed, in particular, as applicable to future NASA space vehicles such as AOTVs and tethered satellites.

The relationship between psychiatric symptomatology and motivation of challenging behaviour: a preliminary study.

PubMed

Holden, Børge; Gitlesen, Jens Petter

2008-01-01

In addition to explaining challenging behaviour by way of behaviour analytic, functional analyses, challenging behaviour is increasingly explained by way of psychiatric symptomatology. According to some researchers, the two approaches complement each other, as psychiatric symptomatology may form a motivational basis for the individual's response to more immediate environmental challenges, like deprivation and aversive conditions. The most common example may be that depressive mood may render task demands aversive. Consequently, the person may show escape-motivated challenging behaviour in the presence of demands. The question becomes whether, or to what extent, relationships between psychiatric symptomatologies and particular functions of challenging behaviour exist. In the present, preliminary study, PAS-ADD checklist, a psychiatric screening instrument, and motivation assessment scale (MAS) were employed in order to investigate this issue. The results show that symptomatologies are largely unrelated to particular behavioural functions. Practical implications are discussed.

Use of new scientific developments in regulatory risk assessments: challenges and opportunities.

PubMed

Tarazona, Jose V

2013-07-01

Since the 1990s, science based ecological risk assessments constitute an essential tool for supporting decision making in the regulatory context. Using the European REACH Regulation as example, this article presents the challenges and opportunities for new scientific developments within the area of chemical control and environmental protection. These challenges can be sorted out in 3 main related topics (sets). In the short term, the challenges are directly associated with the regulatory requirements, required for facilitating a scientifically sound implementation of the different obligations for industry and authorities. It is important to mention that although the actual tools are different due to the regulatory requirements, the basic needs are still the same as those addressed in the early 1990s: understanding the ecological relevance of the predicted effects, including the uncertainty, and facilitating the link with the socio-economic assessment. The second set of challenges covers the opportunities for getting an added value from the regulatory efforts. The information compiled through REACH registration and notification processes is analyzed as source for new integrative developments for assessing the combined chemical risk at the regional level. Finally, the article discusses the challenge of inverting the process and developing risk assessment methods focusing on the receptor, the individual or ecosystem, instead of on the stressor or source. These approaches were limited in the past due to the lack of information, but the identification and dissemination of standard information, including uses, manufacturing sites, physical-chemical, environmental, ecotoxicological, and toxicological properties as well as operational conditions and risk management measures for thousands of chemicals, combined by the knowledge gathered through large scale monitoring programs and spatial information systems is generating new opportunities. The challenge is liking

Assessing non-additive effects in GBLUP model.

PubMed

Vieira, I C; Dos Santos, J P R; Pires, L P M; Lima, B M; Gonçalves, F M A; Balestre, M

2017-05-10

Understanding non-additive effects in the expression of quantitative traits is very important in genotype selection, especially in species where the commercial products are clones or hybrids. The use of molecular markers has allowed the study of non-additive genetic effects on a genomic level, in addition to a better understanding of its importance in quantitative traits. Thus, the purpose of this study was to evaluate the behavior of the GBLUP model in different genetic models and relationship matrices and their influence on the estimates of genetic parameters. We used real data of the circumference at breast height in Eucalyptus spp and simulated data from a population of F 2 . Three commonly reported kinship structures in the literature were adopted. The simulation results showed that the inclusion of epistatic kinship improved prediction estimates of genomic breeding values. However, the non-additive effects were not accurately recovered. The Fisher information matrix for real dataset showed high collinearity in estimates of additive, dominant, and epistatic variance, causing no gain in the prediction of the unobserved data and convergence problems. Estimates presented differences of genetic parameters and correlations considering the different kinship structures. Our results show that the inclusion of non-additive effects can improve the predictive ability or even the prediction of additive effects. However, the high distortions observed in the variance estimates when the Hardy-Weinberg equilibrium assumption is violated due to the presence of selection or inbreeding can converge at zero gains in models that consider epistasis in genomic kinship.

Collaboration challenges in systematic reviews: a survey of health sciences librarians

PubMed Central

Nicholson, Joey; McCrillis, Aileen; Williams, Jeff D.

2017-01-01

Objective: While many librarians have been asked to participate in systematic reviews with researchers, often these researchers are not familiar with the systematic review process or the appropriate role for librarians. The purpose of this study was to identify the challenges and barriers that librarians face when collaborating on systematic reviews. To take a wider view of the whole process of collaborating on systematic reviews, the authors deliberately focused on interpersonal and methodological issues other than searching itself. Methods: To characterize the biggest challenges that librarians face while collaborating on systematic review projects, we used a web-based survey. The thirteen-item survey included seventeen challenges grouped into two categories: methodological and interpersonal. Participants were required to indicate the frequency and difficulty of the challenges listed. Open-ended questions allowed survey participants to describe challenges not listed in the survey and to describe strategies used to overcome challenges. Results: Of the 17 challenges listed in the survey, 8 were reported as common by over 40% of respondents. These included methodological issues around having too broad or narrow research questions, lacking eligibility criteria, having unclear research questions, and not following established methods. The remaining challenges were interpersonal, including issues around student-led projects and the size of the research team. Of the top 8 most frequent challenges, 5 were also ranked as most difficult to handle. Open-ended responses underscored many of the challenges included in the survey and revealed several additional challenges. Conclusions: These results suggest that the most frequent and challenging issues relate to development of the research question and general communication with team members. Clear protocols for collaboration on systematic reviews, as well as a culture of mentorship, can help librarians prevent and address

Collaboration challenges in systematic reviews: a survey of health sciences librarians.

PubMed

Nicholson, Joey; McCrillis, Aileen; Williams, Jeff D

2017-10-01

While many librarians have been asked to participate in systematic reviews with researchers, often these researchers are not familiar with the systematic review process or the appropriate role for librarians. The purpose of this study was to identify the challenges and barriers that librarians face when collaborating on systematic reviews. To take a wider view of the whole process of collaborating on systematic reviews, the authors deliberately focused on interpersonal and methodological issues other than searching itself. To characterize the biggest challenges that librarians face while collaborating on systematic review projects, we used a web-based survey. The thirteen-item survey included seventeen challenges grouped into two categories: methodological and interpersonal. Participants were required to indicate the frequency and difficulty of the challenges listed. Open-ended questions allowed survey participants to describe challenges not listed in the survey and to describe strategies used to overcome challenges. Of the 17 challenges listed in the survey, 8 were reported as common by over 40% of respondents. These included methodological issues around having too broad or narrow research questions, lacking eligibility criteria, having unclear research questions, and not following established methods. The remaining challenges were interpersonal, including issues around student-led projects and the size of the research team. Of the top 8 most frequent challenges, 5 were also ranked as most difficult to handle. Open-ended responses underscored many of the challenges included in the survey and revealed several additional challenges. These results suggest that the most frequent and challenging issues relate to development of the research question and general communication with team members. Clear protocols for collaboration on systematic reviews, as well as a culture of mentorship, can help librarians prevent and address these challenges.

Biological approaches for addressing the grand challenge of providing access to clean drinking water.

PubMed

Riley, Mark R; Gerba, Charles P; Elimelech, Menachem

2011-03-31

The U.S. National Academy of Engineering (NAE) recently published a document presenting "Grand Challenges for Engineering". This list was proposed by leading engineers and scientists from around the world at the request of the U.S. National Science Foundation (NSF). Fourteen topics were selected for these grand challenges, and at least seven can be addressed using the tools and methods of biological engineering. Here we describe how biological engineers can address the challenge of providing access to clean drinking water. This issue must be addressed in part by removing or inactivating microbial and chemical contaminants in order to properly deliver water safe for human consumption. Despite many advances in technologies this challenge is expanding due to increased pressure on fresh water supplies and to new opportunities for growth of potentially pathogenic organisms.

Biological approaches for addressing the grand challenge of providing access to clean drinking water

PubMed Central

2011-01-01

The U.S. National Academy of Engineering (NAE) recently published a document presenting "Grand Challenges for Engineering". This list was proposed by leading engineers and scientists from around the world at the request of the U.S. National Science Foundation (NSF). Fourteen topics were selected for these grand challenges, and at least seven can be addressed using the tools and methods of biological engineering. Here we describe how biological engineers can address the challenge of providing access to clean drinking water. This issue must be addressed in part by removing or inactivating microbial and chemical contaminants in order to properly deliver water safe for human consumption. Despite many advances in technologies this challenge is expanding due to increased pressure on fresh water supplies and to new opportunities for growth of potentially pathogenic organisms. PMID:21453515

Advances in addressing technical challenges of point-of-care diagnostics in resource-limited settings

PubMed Central

Wang, ShuQi; Lifson, Mark A.; Inci, Fatih; Liang, Li-Guo; Sheng, Ye-Feng; Demirci, Utkan

2016-01-01

The striking prevalence of HIV, TB and malaria, as well as outbreaks of emerging infectious diseases, such as influenza A (H7N9), Ebola and MERS, poses great challenges for patient care in resource-limited settings (RLS). However, advanced diagnostic technologies cannot be implemented in RLS largely due to economic constraints. Simple and inexpensive point-of-care (POC) diagnostics, which rely less on environmental context and operator training, have thus been extensively studied to achieve early diagnosis and treatment monitoring in non-laboratory settings. Despite great input from material science, biomedical engineering and nanotechnology for developing POC diagnostics, significant technical challenges are yet to be overcome. Summarized here are the technical challenges associated with POC diagnostics from a RLS perspective and the latest advances in addressing these challenges are reviewed. PMID:26777725

The Shigella human challenge model.

PubMed

Porter, C K; Thura, N; Ranallo, R T; Riddle, M S

2013-02-01

Shigella is an important bacterial cause of infectious diarrhoea globally. The Shigella human challenge model has been used since 1946 for a variety of objectives including understanding disease pathogenesis, human immune responses and allowing for an early assessment of vaccine efficacy. A systematic review of the literature regarding experimental shigellosis in human subjects was conducted. Summative estimates were calculated by strain and dose. While a total of 19 studies evaluating nine strains at doses ranging from 10 to 1 × 1010 colony-forming units were identified, most studies utilized the S. sonnei strain 53G and the S. flexneri strain 2457T. Inoculum solution and pre-inoculation buffering has varied over time although diarrhoea attack rates do not appear to increase above 75-80%, and dysentery rates remain fairly constant, highlighting the need for additional dose-ranging studies. Expansion of the model to include additional strains from different serotypes will elucidate serotype and strain-specific outcome variability.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Team AERO, from the Worcester Polytechnic Institute (WPI) transports their robot to the competition field for the level one of the competition during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Robots that will be competing in the Level one competition are seen as they sit in impound prior to the start of competition at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

Dorothy Rasco, NASA Deputy Associate Administrator for the Space Technology Mission Directorate, speaks at the TouchTomorrow Festival, held in conjunction with the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Saturday, June 14, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-10

The University of Waterloo Robotics Team, from Ontario, Canada, prepares their robot for the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Tuesday, June 10, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. The team from the University of Waterloo is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-11

Jim Rothrock, left, and Carrie Johnson, right, of the Wunderkammer Laboratory team pose for a picture with their robot after attempting the level one competition during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Wednesday, June 11, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-10

The Oregon State University Mars Rover Team follows their robot on the practice field during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Tuesday, June 10, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. The Oregon State University Mars Rover Team is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-10

The Oregon State University Mars Rover Team, from Corvallis, Oregon, follows their robot on the practice field during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Tuesday, June 10, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. The Oregon State University Mars Rover Team is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Additive Biomanufacturing: An Advanced Approach for Periodontal Tissue Regeneration.

PubMed

Carter, Sarah-Sophia D; Costa, Pedro F; Vaquette, Cedryck; Ivanovski, Saso; Hutmacher, Dietmar W; Malda, Jos

2017-01-01

Periodontitis is defined as a chronic inflammatory condition, characterized by destruction of the periodontium, composed of hard (i.e. alveolar bone and cementum) and soft tissues (i.e. gingiva and periodontal ligament) surrounding and supporting the teeth. In severe cases, reduced periodontal support can lead to tooth loss, which requires tissue augmentation or procedures that initiate a repair, yet ideally a regenerative response. However, mimicking the three-dimensional complexity and functional integration of the different tissue components via scaffold- and/or matrix-based guided tissue engineering represents a great challenge. Additive biomanufacturing, a manufacturing method in which objects are designed and fabricated in a layer-by-layer manner, has allowed a paradigm shift in the current manufacturing of medical devices and implants. This shift from design-to-manufacture to manufacture-to-design, seen from a translational research point of view, provides the biomedical engineering and periodontology communities a technology with the potential to achieve tissue regeneration instead of repair. In this review, the focus is put on additively biomanufactured scaffolds for periodontal applications. Besides a general overview of the concept of additive biomanufacturing within this field, different developed scaffold designs are described. To conclude, future directions regarding advanced biomaterials and additive biomanufacturing technologies for applications in regenerative periodontology are highlighted.

Electric utility use of fireside additives. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Locklin, D.W.; Krause, H.H.; Anson, D.

1980-01-01

Fireside additives have been used or proposed for use in fossil-fired utility boilers to combat a number of problems related to boiler performance and reliability. These problems include corrosion, fouling, superheat control, and acidic emissions. Fuel additives and other fireside additives have been used mainly with oil firing; however, there is growing experience with additives in coal-firing, especially for flyash conditioning to improve the performance of electrostatic precipitators. In decisions regarding the selection and use of additives, utilities have had to rely extensively on empiricism, due partly to an incomplete understanding of processes involved and partly to the limited amountmore » of quantitative data. The study reported here was sponsored by the Electric Power Research Institute to assemble and analyze pertinent operating experience and to recommend guidelines for utility decisions on the use of additives. The combined results of the state-of-the-art review of technical literature and a special survey of utility experience are reported. A total of 38 utilities participated in the survey, providing information on trials conducted on 104 units in 93 different plants. Altogether, 445 separate trials were reported, each representing a unit/additive/fuel combination. Additives used in these trials included 90 different additive formulations, both pure compounds and proprietary products. These formulations were categorized into 37 generic classes according to their chemical constituents, and the results of the survey are presented by these generic classes. The findings are organized according to the operating problems for which fireside additives are used. Guidelines are presented for utility use in additive selection and in planning additive trials.« less

Elevational variation in body-temperature response to immune challenge in a lizard

PubMed Central

Reguera, Senda; Moreno-Rueda, Gregorio

2016-01-01

Immunocompetence benefits animal fitness by combating pathogens, but also entails some costs. One of its main components is fever, which in ectotherms involves two main types of costs: energy expenditure and predation risk. Whenever those costs of fever outweigh its benefits, ectotherms are expected not to develop fever, or even to show hypothermia, reducing costs of thermoregulation and diverting the energy saved to other components of the immune system. Environmental thermal quality, and therefore the thermoregulation cost/benefit balance, varies geographically. Hence, we hypothesize that, in alpine habitats, immune-challenged ectotherms should show no thermal response, given that (1) hypothermia would be very costly, as the temporal window for reproduction is extremely small, and (2) fever would have a prohibitive cost, as heat acquisition is limited in such habitat. However, in temperate habitats, immune-challenged ectotherms might show a febrile response, due to lower cost/benefit balance as a consequence of a more suitable thermal environment. We tested this hypothesis in Psammodromus algirus lizards from Sierra Nevada (SE Spain), by testing body temperature preferred by alpine and non-alpine lizards, before and after activating their immune system with a typical innocuous pyrogen. Surprisingly, non-alpine lizards responded to immune challenge by decreasing preferential body-temperature, presumably allowing them to save energy and reduce exposure to predators. On the contrary, as predicted, immune-challenged alpine lizards maintained their body-temperature preferences. These results match with increased costs of no thermoregulation with elevation, due to the reduced window of time for reproduction in alpine environment. PMID:27168981

Elevational variation in body-temperature response to immune challenge in a lizard.

PubMed

Zamora-Camacho, Francisco Javier; Reguera, Senda; Moreno-Rueda, Gregorio

2016-01-01

Immunocompetence benefits animal fitness by combating pathogens, but also entails some costs. One of its main components is fever, which in ectotherms involves two main types of costs: energy expenditure and predation risk. Whenever those costs of fever outweigh its benefits, ectotherms are expected not to develop fever, or even to show hypothermia, reducing costs of thermoregulation and diverting the energy saved to other components of the immune system. Environmental thermal quality, and therefore the thermoregulation cost/benefit balance, varies geographically. Hence, we hypothesize that, in alpine habitats, immune-challenged ectotherms should show no thermal response, given that (1) hypothermia would be very costly, as the temporal window for reproduction is extremely small, and (2) fever would have a prohibitive cost, as heat acquisition is limited in such habitat. However, in temperate habitats, immune-challenged ectotherms might show a febrile response, due to lower cost/benefit balance as a consequence of a more suitable thermal environment. We tested this hypothesis in Psammodromus algirus lizards from Sierra Nevada (SE Spain), by testing body temperature preferred by alpine and non-alpine lizards, before and after activating their immune system with a typical innocuous pyrogen. Surprisingly, non-alpine lizards responded to immune challenge by decreasing preferential body-temperature, presumably allowing them to save energy and reduce exposure to predators. On the contrary, as predicted, immune-challenged alpine lizards maintained their body-temperature preferences. These results match with increased costs of no thermoregulation with elevation, due to the reduced window of time for reproduction in alpine environment.

Lignocellulosic ethanol production at high-gravity: challenges and perspectives.

PubMed

Koppram, Rakesh; Tomás-Pejó, Elia; Xiros, Charilaos; Olsson, Lisbeth

2014-01-01

In brewing and ethanol-based biofuel industries, high-gravity fermentation produces 10-15% (v/v) ethanol, resulting in improved overall productivity, reduced capital cost, and reduced energy input compared to processing at normal gravity. High-gravity technology ensures a successful implementation of cellulose to ethanol conversion as a cost-competitive process. Implementation of such technologies is possible if all process steps can be performed at high biomass concentrations. This review focuses on challenges and technological efforts in processing at high-gravity conditions and how these conditions influence the physiology and metabolism of fermenting microorganisms, the action of enzymes, and other process-related factors. Lignocellulosic materials add challenges compared to implemented processes due to high inhibitors content and the physical properties of these materials at high gravity. Copyright © 2013 Elsevier Ltd. All rights reserved.

Promoted nitrogen dissolution due to the addition of Li or Ca to Ga-Na melt; some effects of additives on the growth of GaN single crystals using the sodium flux method

NASA Astrophysics Data System (ADS)

Morishita, Masanori; Kawamura, Fumio; Kawahara, Minoru; Yoshimura, Masashi; Mori, Yusuke; Sasaki, Takatomo

2005-10-01

The effect of the addition of Li or Ca to Ga-Na melt on the promotion of nitrogen dissolution was examined quantitatively in the growth of GaN single crystals using the sodium flux method. The addition of Li or Ca to Ga-Na melt increased both the solubility of solid GaN and that of gaseous nitrogen against the solution. The increase in the solubility of gaseous nitrogen seems to be caused by additives having a high binding energy with nitrogen. We measured the solubility of GaN and that of gaseous nitrogen against Ga-Na, Ga-Na-Li and Ga-Na-Ca melt in this study. On the basis of these data, we clarified the relationship between the N/Ga ratio in the solution and the coloration of GaN crystals grown in each system, and between changes in the yield of GaN and the absolute value of supersaturation.

Additively manufactured biodegradable porous magnesium.

PubMed

Li, Y; Zhou, J; Pavanram, P; Leeflang, M A; Fockaert, L I; Pouran, B; Tümer, N; Schröder, K-U; Mol, J M C; Weinans, H; Jahr, H; Zadpoor, A A

2018-02-01

. Recent advances in additive manufacturing have resulted in biomaterials that satisfy the first two requirements but simultaneously satisfying the third requirement has proven challenging so far. Here we present additively manufactured porous magnesium structures that have the potential to satisfy all above-mentioned requirements. Even after 4 weeks of biodegradation, the mechanical properties of the porous structures were found to be within those reported for native bone. Moreover, our comprehensive electrochemical, mechanical, topological, and biological study revealed a unique biodegradation behavior and the limited cytotoxicity of the developed biomaterials. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The Challenging Experience Questionnaire: Characterization of challenging experiences with psilocybin mushrooms.

PubMed

Barrett, Frederick S; Bradstreet, Matthew P; Leoutsakos, Jeannie-Marie S; Johnson, Matthew W; Griffiths, Roland R

2016-12-01

Acute adverse psychological reactions to classic hallucinogens ("bad trips" or "challenging experiences"), while usually benign with proper screening, preparation, and support in controlled settings, remain a safety concern in uncontrolled settings (such as illicit use contexts). Anecdotal and case reports suggest potential adverse acute symptoms including affective (panic, depressed mood), cognitive (confusion, feelings of losing sanity), and somatic (nausea, heart palpitation) symptoms. Responses to items from several hallucinogen-sensitive questionnaires (Hallucinogen Rating Scale, the States of Consciousness Questionnaire, and the Five-Dimensional Altered States of Consciousness questionnaire) in an Internet survey of challenging experiences with the classic hallucinogen psilocybin were used to construct and validate a Challenging Experience Questionnaire. The stand-alone Challenging Experience Questionnaire was then validated in a separate sample. Seven Challenging Experience Questionnaire factors (grief, fear, death, insanity, isolation, physical distress, and paranoia) provide a phenomenological profile of challenging aspects of experiences with psilocybin. Factor scores were associated with difficulty, meaningfulness, spiritual significance, and change in well-being attributed to the challenging experiences. The factor structure did not differ based on gender or prior struggle with anxiety or depression. The Challenging Experience Questionnaire provides a basis for future investigation of predictors and outcomes of challenging experiences with classic hallucinogens. © The Author(s) 2016.

Additive Manufacturing of Metastable Beta Titanium Alloys

NASA Astrophysics Data System (ADS)

Yannetta, Christopher J.

Additive manufacturing processes of many alloys are known to develop texture during the deposition process due to the rapid reheating and the directionality of the dissipation of heat. Titanium alloys and with respect to this study beta titanium alloys are especially susceptible to these effects. This work examines Ti-20wt%V and Ti-12wt%Mo deposited under normal additive manufacturing process parameters to examine the texture of these beta-stabilized alloys. Both microstructures contained columnar prior beta grains 1-2 mm in length beginning at the substrate with no visible equiaxed grains. This microstructure remained constant in the vanadium system throughout the build. The microstructure of the alloy containing molybdenum changed from a columnar to an equiaxed structure as the build height increased. Eighteen additional samples of the Ti-Mo system were created under different processing parameters to identify what role laser power and travel speed have on the microstructure. There appears to be a correlation in alpha lath size and power density. The two binary alloys were again deposited under the same conditions with the addition of 0.5wt% boron to investigate the effects an insoluble interstitial alloying element would have on the microstructure. The size of the prior beta grains in these two alloys were reduced with the addition of boron by approximately 50 (V) and 100 (Mo) times.

Addressing Challenges in Studies of Behavioral Responses of Whales to Noise.

PubMed

Cato, Douglas H; Dunlop, Rebecca A; Noad, Michael J; McCauley, Robert D; Kniest, Eric; Paton, David; Kavanagh, Ailbhe S

2016-01-01

Studying the behavioral response of whales to noise presents numerous challenges. In addition to the characteristics of the noise exposure, many factors may affect the response and these must be measured and accounted for in the analysis. An adequate sample size that includes matching controls is crucial if meaningful results are to be obtained. Field work is thus complicated, logistically difficult, and expensive. This paper discusses some of the challenges and how they are being met in a large-scale multiplatform project in which humpback whales are exposed to the noise of seismic air guns.

The Addition of Medium-Chain Triglycerides to a Purified Fish Oil Based Diet Alters Inflammatory Profiles in Mice

PubMed Central

Carlson, SJ; Nandivada, P; Chang, MI; Mitchell, PD; O’Loughlin, A; Cowan, E; Gura, KM; Nose, V; Bistrian, B; Puder, M

2014-01-01

Objective Parenteral nutrition associated liver disease (PNALD) is a deadly complication of long term parenteral nutrition (PN) use in infants. Fish oil-based lipid emulsion has been shown in recent years to effectively treat PNALD. Alternative fat sources free of essential fatty acids have recently been investigated for health benefits related to decreased inflammatory response. We hypothesized that the addition of medium-chain triglycerides (MCT) to a purified fish oil-based diet would decrease the response to inflammatory challenge in mice, while allowing for sufficient growth and development. Materials/Methods Six groups of ten adult male C57/Bl6 mice were pair-fed different dietary treatments for a period of twelve weeks, varying only in fat source (percent calories by weight): 10.84% soybean oil (SOY), 10% coconut oil (HCO), 10% medium-chain triglycerides (MCT), 3% purified fish oil (PFO), 3% purified fish oil with 3% medium-chain triglycerides (50:50 MCT:PFO) and 3% purified fish oil with 7.59% medium-chain triglycerides (70:30 MCT:PFO). An endotoxin challenge was administered to half of the animals in each group at the completion of dietary treatment. Results All groups demonstrated normal growth throughout the study period. Groups fed MCT and HCO diets demonstrated biochemical essential fatty acid deficiency and decreased IL-6 and TNF-α response to endotoxin challenge. Groups containing PFO had increased inflammatory response to endotoxin challenge, and the addition of MCT to PFO mitigated this inflammatory response. Conclusion These results suggest that the addition of MCT to PFO formulations may decrease the host response to inflammatory challenge, which may pose potential for optimized PN formulations. Inclusion of MCT in lipid emulsions given with PN formulations may be of use in therapeutic interventions for disease states resulting from chronic inflammation. PMID:25458829

The addition of medium-chain triglycerides to a purified fish oil-based diet alters inflammatory profiles in mice.

PubMed

Carlson, Sarah J; Nandivada, Prathima; Chang, Melissa I; Mitchell, Paul D; O'Loughlin, Alison; Cowan, Eileen; Gura, Kathleen M; Nose, Vania; Bistrian, Bruce R; Puder, Mark

2015-02-01

Parenteral nutrition associated liver disease (PNALD) is a deadly complication of long term parenteral nutrition (PN) use in infants. Fish oil-based lipid emulsion has been shown in recent years to effectively treat PNALD. Alternative fat sources free of essential fatty acids have recently been investigated for health benefits related to decreased inflammatory response. We hypothesized that the addition of medium-chain triglycerides (MCT) to a purified fish oil-based diet would decrease the response to inflammatory challenge in mice, while allowing for sufficient growth and development. Six groups of ten adult male C57/Bl6 mice were pair-fed different dietary treatments for a period of twelve weeks, varying only in fat source (percent calories by weight): 10.84% soybean oil (SOY), 10% coconut oil (HCO), 10% medium-chain triglycerides (MCT), 3% purified fish oil (PFO), 3% purified fish oil with 3% medium-chain triglycerides (50:50 MCT:PFO) and 3% purified fish oil with 7.59% medium-chain triglycerides (70:30 MCT:PFO). An endotoxin challenge was administered to half of the animals in each group at the completion of dietary treatment. All groups demonstrated normal growth throughout the study period. Groups fed MCT and HCO diets demonstrated biochemical essential fatty acid deficiency and decreased IL-6 and TNF-α response to endotoxin challenge. Groups containing PFO had increased inflammatory response to endotoxin challenge, and the addition of MCT to PFO mitigated this inflammatory response. These results suggest that the addition of MCT to PFO formulations may decrease the host response to inflammatory challenge, which may pose potential for optimized PN formulations. Inclusion of MCT in lipid emulsions given with PN formulations may be of use in therapeutic interventions for disease states resulting from chronic inflammation. Copyright © 2015 Elsevier Inc. All rights reserved.

Method of introducing additive into a reaction gas flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michelfelder, S.; Chughtai, M.Y.

1984-04-03

A method of continuously introducing additive, which is conveyed by gaseous and/or liquid carriers, into a turbulent reaction gas flow in the combustion chamber of a steam generator having dry ash withdrawal for selective removal, in a dry manner, of environmentally harmful gaseous noxious materials, such as sulfur, chlorine, and chlorine compounds, which are contained in a hot reaction gas flow which results after a complete or incomplete flame combustion of solid, liquid, or gaseous fuels. Depending upon the additive introduced, heat is stored and/or used for decomposition reactions. The additive, is first introduced at one or more input locations,more » due to locally different pressure conditions in the combustion chamber, into one or more recirculation flows which are within the system and are closed. The additive is subsequently withdrawn from these recirculation flows and is introduced into the reaction gas flow.« less

The 2014 Sandia Verification and Validation Challenge: Problem statement

DOE PAGES

Hu, Kenneth; Orient, George

2016-01-18

This paper presents a case study in utilizing information from experiments, models, and verification and validation (V&V) to support a decision. It consists of a simple system with data and models provided, plus a safety requirement to assess. The goal is to pose a problem that is flexible enough to allow challengers to demonstrate a variety of approaches, but constrained enough to focus attention on a theme. This was accomplished by providing a good deal of background information in addition to the data, models, and code, but directing the participants' activities with specific deliverables. In this challenge, the theme ismore » how to gather and present evidence about the quality of model predictions, in order to support a decision. This case study formed the basis of the 2014 Sandia V&V Challenge Workshop and this resulting special edition of the ASME Journal of Verification, Validation, and Uncertainty Quantification.« less

Longitudinal Multiple Sclerosis Lesion Segmentation: Resource & Challenge

PubMed Central

Carass, Aaron; Roy, Snehashis; Jog, Amod; Cuzzocreo, Jennifer L.; Magrath, Elizabeth; Gherman, Adrian; Button, Julia; Nguyen, James; Prados, Ferran; Sudre, Carole H.; Cardoso, Manuel Jorge; Cawley, Niamh; Ciccarelli, Olga; Wheeler-Kingshott, Claudia A. M.; Ourselin, Sébastien; Catanese, Laurence; Deshpande, Hrishikesh; Maurel, Pierre; Commowick, Olivier; Barillot, Christian; Tomas-Fernandez, Xavier; Warfield, Simon K.; Vaidya, Suthirth; Chunduru, Abhijith; Muthuganapathy, Ramanathan; Krishnamurthi, Ganapathy; Jesson, Andrew; Arbel, Tal; Maier, Oskar; Handels, Heinz; Iheme, Leonardo O.; Unay, Devrim; Jain, Saurabh; Sima, Diana M.; Smeets, Dirk; Ghafoorian, Mohsen; Platel, Bram; Birenbaum, Ariel; Greenspan, Hayit; Bazin, Pierre-Louis; Calabresi, Peter A.; Crainiceanu, Ciprian M.; Ellingsen, Lotta M.; Reich, Daniel S.; Prince, Jerry L.; Pham, Dzung L.

2017-01-01

In conjunction with the ISBI 2015 conference, we organized a longitudinal lesion segmentation challenge providing training and test data to registered participants. The training data consisted of five subjects with a mean of 4.4 time-points, and test data of fourteen subjects with a mean of 4.4 time-points. All 82 data sets had the white matter lesions associated with multiple sclerosis delineated by two human expert raters. Eleven teams submitted results using state-of-the-art lesion segmentation algorithms to the challenge, with ten teams presenting their results at the conference. We present a quantitative evaluation comparing the consistency of the two raters as well as exploring the performance of the eleven submitted results in addition to three other lesion segmentation algorithms. The challenge presented three unique opportunities: 1) the sharing of a rich data set; 2) collaboration and comparison of the various avenues of research being pursued in the community; and 3) a review and refinement of the evaluation metrics currently in use. We report on the performance of the challenge participants, as well as the construction and evaluation of a consensus delineation. The image data and manual delineations will continue to be available for download, through an evaluation website1 as a resource for future researchers in the area. This data resource provides a platform to compare existing methods in a fair and consistent manner to each other and multiple manual raters. PMID:28087490

Additive Manufacturing Modeling and Simulation A Literature Review for Electron Beam Free Form Fabrication

NASA Technical Reports Server (NTRS)

Seufzer, William J.

2014-01-01

Additive manufacturing is coming into industrial use and has several desirable attributes. Control of the deposition remains a complex challenge, and so this literature review was initiated to capture current modeling efforts in the field of additive manufacturing. This paper summarizes about 10 years of modeling and simulation related to both welding and additive manufacturing. The goals were to learn who is doing what in modeling and simulation, to summarize various approaches taken to create models, and to identify research gaps. Later sections in the report summarize implications for closed-loop-control of the process, implications for local research efforts, and implications for local modeling efforts.

Work-life balancing: challenges and strategies.

PubMed

Chittenden, Eva H; Ritchie, Christine S

2011-07-01

Balancing the personal and the professional is an ongoing struggle for most professionals, and palliative care clinicians are no exception. A sustained lack of balance can lead to feelings of frustration, inadequacy, and guilt. Palliative care physicians may find this balance particularly difficult due to the nature of their work: caring for patients and families who are often suffering and in crisis. In this article, we describe challenges to work-life balancing and strategies that may promote balance, including "timeshifting," goal setting, cognitive reframing, and self-care. We argue that the search for balance is a lifelong endeavor that entails self-reflection and continuing examination of one's values and goals.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-10

A pair of Worcester Polytechnic Institute (WPI) students walk past a pair of team KuuKulgur's robots on the campus quad, during a final tuneup before the start of competition at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Tuesday, June 10, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team KuuKulgur is one of eighteen teams competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Workplace Discrimination: An Additional Stressor for Internationally Educated Nurses.

PubMed

Baptiste, Maria M

2015-08-18

Discrimination against internationally educated nurses (IENs) remains a seldom-explored topic in the United States. Yet, the literature describing experiences of IENs indicates that some do experience workplace discrimination as an additional workplace stressor. IENs view this discrimination as an obstacle to career advancement and professional recognition. Consequences of workplace discrimination affect IENs' physical and psychological well being, the quality of patient care, and healthcare organizational costs. In anticipation of future nursing shortages, understanding and minimizing workplace discrimination will benefit nurses, patients, and healthcare organizations. In this article the author addresses motivation and challenges associated with international nurse migration and immigration, relates these challenges to Roy's theoretical framework, describes workplace discrimination, and reviews both consequences of and evidence for workplace discrimination. Next, she considers the significance of this discrimination for healthcare agencies, and approaches for decreasing stress for IENs during their transition process. She concludes that workplace discrimination has a negative, multifaceted effect on both professional nursing and healthcare organizations. Support measures developed to promote mutual respect among all nurses are presented.

Leadership survey. An evaluation of health care executives' challenges.

PubMed

Thrall, T H; Hoppszallern, S

2001-01-01

Locating and keeping employees represents one of the greatest challenges facing health care leaders today. This is a key finding of the third Leadership Survey of executives in physician practices, managed care organizations and hospitals. The survey is sponsored by the Medical Group Management Association and Hospitals & Health Networks magazine. Other significant results: Practices put the most emphasis on teamwork, training and staff development as methods to combat labor shortages; practice executives count adequacy of reimbursements and physician productivity as top leadership challenges, along with the availability of qualified workers; practices choose print advertising and the addition of new products and services as the best ways for them to build market share.

Complex shaped boron carbides from negative additive manufacturing

DOE PAGES

Lu, Ryan; Chandrasekaran, Swetha; Du Frane, Wyatt L.; ...

2018-03-13

In this paper, complex shaped boron carbide with carbon (B 4C/C) at near-full densities were achieved for the first time using negative additive manufacturing techniques via gelcasting. Negative additive manufacturing involves 3D printing of sacrificial molds used for casting negative copies. B 4C powder distributions and rheology of suspensions were optimized to successfully cast complex shapes. In addition to demonstrating scalability of these complex geometries, hierarchically meso-porous structures were also shown to be possible from this technique. Resorcinol-Formaldehyde (RF) polymer was selected as the gelling agent and can also pyrolyze into a carbon aerogel network to act as the sinteringmore » aid for B 4C. Finally, due to the highly effective distribution of in situ carbon for the B 4C matrix, near-full sintered density of 97–98% of theoretical maximum density was achieved.« less

Complex shaped boron carbides from negative additive manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Ryan; Chandrasekaran, Swetha; Du Frane, Wyatt L.

In this paper, complex shaped boron carbide with carbon (B 4C/C) at near-full densities were achieved for the first time using negative additive manufacturing techniques via gelcasting. Negative additive manufacturing involves 3D printing of sacrificial molds used for casting negative copies. B 4C powder distributions and rheology of suspensions were optimized to successfully cast complex shapes. In addition to demonstrating scalability of these complex geometries, hierarchically meso-porous structures were also shown to be possible from this technique. Resorcinol-Formaldehyde (RF) polymer was selected as the gelling agent and can also pyrolyze into a carbon aerogel network to act as the sinteringmore » aid for B 4C. Finally, due to the highly effective distribution of in situ carbon for the B 4C matrix, near-full sintered density of 97–98% of theoretical maximum density was achieved.« less