Science.gov

Sample records for additional chemical information

  1. Chemical information science coverage in Chemical Abstracts.

    PubMed

    Wiggins, G

    1987-02-01

    For many years Chemical Abstracts has included in its coverage publications on chemical documentation or chemical information science. Although the bulk of those publications can be found in section 20 of Chemical Abstracts, many relevant articles were found scattered among 39 other sections of CA in 1984-1985. In addition to the scattering of references in CA, the comprehensiveness of Chemical Abstracts as a secondary source for chemical information science is called into question. Data are provided on the journals that contributed the most references on chemical information science and on the languages of publication of relevant articles.

  2. Chemical information systems

    SciTech Connect

    Zebora, M.

    1994-12-31

    The growing number of Federal and State regulations today from EPA to OSHA is putting a large burden on organizations to comply with regard to chemicals in the work place. The cornerstone of chemical information is the Material Safety Data Sheet (MSDS). The MSDS has been a requirement for chemical manufacturers for over fifteen years. Manufacturers of hazardous materials must provide MSDSs to purchasers. However, recent additional regulations from OSHA, in particular the Right To Know and the Hazard Communication Standard (Haz-Com) require that employers who use chemicals must be capable of providing an MSDS to every employee that requests one for a material that they work with. Paper filing systems to managing MSDSs are hard to maintain, costly, and inefficient. In multifacility organizations this can result in delays in distributions of those MSDSs to employees. At AT and T Bell Laboratories the Environmental Health and Safety Center has invested over a decade of development work into producing an integrated Chemical Inventory System/MSDS System. That system meets the requirements discussed in this paper and serves six major R and D laboratory facilities in three states. The system resides on a desktop personal computer. Operation of the system relies on teamwork between several diverse organizations which are involved in management of chemical safety at AT and T Bell Laboratories. The departments represented on that team are Industrial Hygiene and Safety, Environmental Management, Facilities Operations, Purchasing, Health Services, Research, and Environmental Data Management Services.

  3. Modification of chemical additives to elastomeric compositions

    NASA Astrophysics Data System (ADS)

    Mukhutdinov, A. A.; Grishin, B. S.

    1994-08-01

    The physicochemical principles of the modification of crystalline chemical additives to elastomeric compositions are examined. A classification of various types of modifications based on scientific principles is given. The modifications are subdivided into physical and physicochemical depending on the configuration of the molecules in the crystals, the defectiveness and dispersity of the crystalline particles, the melting points of the crystals, and the presence of necleophilic and electrophylic centres in the molecules of the components of binary and complex eutectic mixtures. The effectiveness of the modification of the chemical additives is determined by the manifestation in binary systems of these components in elastomeric compositions of physical and chemical synergism due to the occurrence of the relevant processes in such systems. A relation has been discovered between the physical and chemical phenomena accompanying the modification of the chemical additives in binary and complex eutectic mixtures, their influence on the properties of the elastomeric composition is examined, the ecological problems associated with the processing of such materials are discussed, and the relation between the structure and properties of the molecules of the additives is analysed using quantum-chemical calculations. The bibliography includes 92 references.

  4. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  5. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  6. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  7. 17 CFR 230.408 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Additional information. 230... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General Requirements § 230.408 Additional information. (a) In addition to the information expressly required to be included in a registration statement,...

  8. 17 CFR 230.408 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 2 2013-04-01 2013-04-01 false Additional information. 230... RULES AND REGULATIONS, SECURITIES ACT OF 1933 General Requirements § 230.408 Additional information. (a) In addition to the information expressly required to be included in a registration statement,...

  9. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 2 2013-10-01 2013-10-01 false Additional information. 25.111 Section 25.111... Applications and Licenses General Application Filing Requirements § 25.111 Additional information. (a) The Commission may request from any party at any time additional information concerning any application, or...

  10. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The... activity to submit additional information....

  11. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 2 2012-10-01 2012-10-01 false Additional information. 25.111 Section 25.111... Applications and Licenses General Application Filing Requirements § 25.111 Additional information. (a) The Commission may request from any party at any time additional information concerning any application, or...

  12. 10 CFR 725.13 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Additional information. 725.13 Section 725.13 Energy DEPARTMENT OF ENERGY PERMITS FOR ACCESS TO RESTRICTED DATA Applications § 725.13 Additional information. The... and before the termination of the permit, require additional information in order to enable the...

  13. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Additional information. 25.111 Section 25.111... Applications and Licenses General Application Filing Requirements § 25.111 Additional information. (a) The Commission may request from any party at any time additional information concerning any application, or...

  14. 28 CFR 80.7 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Additional information. 80.7 Section 80.7... § 80.7 Additional information. If an issuer's or domestic concern's submission does not contain all of the information required by § 80.6, the Department of Justice may request whatever...

  15. 28 CFR 80.7 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Additional information. 80.7 Section 80.7... § 80.7 Additional information. If an issuer's or domestic concern's submission does not contain all of the information required by § 80.6, the Department of Justice may request whatever...

  16. Disclosure of hydraulic fracturing fluid chemical additives: analysis of regulations.

    PubMed

    Maule, Alexis L; Makey, Colleen M; Benson, Eugene B; Burrows, Isaac J; Scammell, Madeleine K

    2013-01-01

    Hydraulic fracturing is used to extract natural gas from shale formations. The process involves injecting into the ground fracturing fluids that contain thousands of gallons of chemical additives. Companies are not mandated by federal regulations to disclose the identities or quantities of chemicals used during hydraulic fracturing operations on private or public lands. States have begun to regulate hydraulic fracturing fluids by mandating chemical disclosure. These laws have shortcomings including nondisclosure of proprietary or "trade secret" mixtures, insufficient penalties for reporting inaccurate or incomplete information, and timelines that allow for after-the-fact reporting. These limitations leave lawmakers, regulators, public safety officers, and the public uninformed and ill-prepared to anticipate and respond to possible environmental and human health hazards associated with hydraulic fracturing fluids. We explore hydraulic fracturing exemptions from federal regulations, as well as current and future efforts to mandate chemical disclosure at the federal and state level.

  17. Disclosure of hydraulic fracturing fluid chemical additives: analysis of regulations.

    PubMed

    Maule, Alexis L; Makey, Colleen M; Benson, Eugene B; Burrows, Isaac J; Scammell, Madeleine K

    2013-01-01

    Hydraulic fracturing is used to extract natural gas from shale formations. The process involves injecting into the ground fracturing fluids that contain thousands of gallons of chemical additives. Companies are not mandated by federal regulations to disclose the identities or quantities of chemicals used during hydraulic fracturing operations on private or public lands. States have begun to regulate hydraulic fracturing fluids by mandating chemical disclosure. These laws have shortcomings including nondisclosure of proprietary or "trade secret" mixtures, insufficient penalties for reporting inaccurate or incomplete information, and timelines that allow for after-the-fact reporting. These limitations leave lawmakers, regulators, public safety officers, and the public uninformed and ill-prepared to anticipate and respond to possible environmental and human health hazards associated with hydraulic fracturing fluids. We explore hydraulic fracturing exemptions from federal regulations, as well as current and future efforts to mandate chemical disclosure at the federal and state level. PMID:23552653

  18. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE (Eff. Jan. 10, 2011) Content Requirements... notices, the CPSC shall include in the Database any additional information it determines to be in...

  19. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically...

  20. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically...

  1. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically...

  2. 10 CFR 810.14 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Additional information. 810.14 Section 810.14 Energy DEPARTMENT OF ENERGY ASSISTANCE TO FOREIGN ATOMIC ENERGY ACTIVITIES § 810.14 Additional information. The Department of Energy may at any time require a person engaging in any generally or specifically...

  3. 25 CFR 214.5 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Additional information. 214.5 Section 214.5 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.5 Additional information. The officer in...

  4. 25 CFR 214.5 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Additional information. 214.5 Section 214.5 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.5 Additional information. The officer in charge may, at...

  5. 25 CFR 214.5 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Additional information. 214.5 Section 214.5 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.5 Additional information. The officer in...

  6. 25 CFR 214.5 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Additional information. 214.5 Section 214.5 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.5 Additional information. The officer in...

  7. 25 CFR 214.5 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Additional information. 214.5 Section 214.5 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF OSAGE RESERVATION LANDS, OKLAHOMA, FOR MINING, EXCEPT OIL AND GAS § 214.5 Additional information. The officer in...

  8. 34 CFR 75.231 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS How Grants Are Made Procedures to Make A Grant § 75.231 Additional information. After selecting an application for funding, the Secretary may require the applicant to submit additional information. (Authority: 20 U.S.C. 1221e-3 and 3474)...

  9. 34 CFR 75.231 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS How Grants Are Made Procedures to Make A Grant § 75.231 Additional information. After selecting an application for funding, the Secretary may require the applicant to submit additional information. (Authority: 20 U.S.C. 1221e-3 and 3474)...

  10. 34 CFR 75.231 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS How Grants Are Made Procedures to Make A Grant § 75.231 Additional information. After selecting an application for funding, the Secretary may require the applicant to submit additional information. (Authority: 20 U.S.C. 1221e-3 and 3474)...

  11. 34 CFR 75.231 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS How Grants Are Made Procedures to Make A Grant § 75.231 Additional information. After selecting an application for funding, the Secretary may require the applicant to submit additional information. (Authority: 20 U.S.C. 1221e-3 and 3474)...

  12. 34 CFR 75.231 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS How Grants Are Made Procedures to Make A Grant § 75.231 Additional information. After selecting an application for funding, the Secretary may require the applicant to submit additional information. (Authority: 20 U.S.C. 1221e-3 and 3474)...

  13. Chemical Shuttle Additives in Lithium Ion Batteries

    SciTech Connect

    Patterson, Mary

    2013-03-31

    The goals of this program were to discover and implement a redox shuttle that is compatible with large format lithium ion cells utilizing LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} (NMC) cathode material and to understand the mechanism of redox shuttle action. Many redox shuttles, both commercially available and experimental, were tested and much fundamental information regarding the mechanism of redox shuttle action was discovered. In particular, studies surrounding the mechanism of the reduction of the oxidized redox shuttle at the carbon anode surface were particularly revealing. The initial redox shuttle candidate, namely 2-(pentafluorophenyl)-tetrafluoro-1,3,2-benzodioxaborole (BDB) supplied by Argonne National Laboratory (ANL, Lemont, Illinois), did not effectively protect cells containing NMC cathodes from overcharge. The ANL-RS2 redox shuttle molecule, namely 1,4-bis(2-methoxyethoxy)-2,5-di-tert-butyl-benzene, which is a derivative of the commercially successful redox shuttle 2,5-di-tert-butyl-1,4-dimethoxybenzene (DDB, 3M, St. Paul, Minnesota), is an effective redox shuttle for cells employing LiFePO{sub 4} (LFP) cathode material. The main advantage of ANL-RS2 over DDB is its larger solubility in electrolyte; however, ANL-RS2 is not as stable as DDB. This shuttle also may be effectively used to rebalance cells in strings that utilize LFP cathodes. The shuttle is compatible with both LTO and graphite anode materials although the cell with graphite degrades faster than the cell with LTO, possibly because of a reaction with the SEI layer. The degradation products of redox shuttle ANL-RS2 were positively identified. Commercially available redox shuttles Li{sub 2}B{sub 12}F{sub 12} (Air Products, Allentown, Pennsylvania and Showa Denko, Japan) and DDB were evaluated and were found to be stable and effective redox shuttles at low C-rates. The Li{sub 2}B{sub 12}F{sub 12} is suitable for lithium ion cells utilizing a high voltage cathode (potential that is higher

  14. 42 CFR 1008.39 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Additional information. 1008.39 Section 1008.39 Public Health OFFICE OF INSPECTOR GENERAL-HEALTH CARE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OIG AUTHORITIES ADVISORY OPINIONS BY THE OIG Submission of a Formal Request for an Advisory Opinion §...

  15. 33 CFR 157.31 - Discharges: Chemical additives.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Discharges: Chemical additives. 157.31 Section 157.31 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... OIL IN BULK Vessel Operation § 157.31 Discharges: Chemical additives. No person may use a...

  16. 33 CFR 157.31 - Discharges: Chemical additives.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Discharges: Chemical additives. 157.31 Section 157.31 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... OIL IN BULK Vessel Operation § 157.31 Discharges: Chemical additives. No person may use a...

  17. 33 CFR 157.31 - Discharges: Chemical additives.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Discharges: Chemical additives. 157.31 Section 157.31 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... OIL IN BULK Vessel Operation § 157.31 Discharges: Chemical additives. No person may use a...

  18. 33 CFR 157.31 - Discharges: Chemical additives.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Discharges: Chemical additives. 157.31 Section 157.31 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... OIL IN BULK Vessel Operation § 157.31 Discharges: Chemical additives. No person may use a...

  19. 33 CFR 157.31 - Discharges: Chemical additives.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Discharges: Chemical additives. 157.31 Section 157.31 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... OIL IN BULK Vessel Operation § 157.31 Discharges: Chemical additives. No person may use a...

  20. Chemical Mixture Risk Assessment Additivity-Based Approaches

    EPA Science Inventory

    Powerpoint presentation includes additivity-based chemical mixture risk assessment methods. Basic concepts, theory and example calculations are included. Several slides discuss the use of "common adverse outcomes" in analyzing phthalate mixtures.

  1. Mechanism of concentration addition toxicity: they are different for nonpolar narcotic chemicals, polar narcotic chemicals and reactive chemicals.

    PubMed

    Lin, Zhifen; Du, Jianwei; Yin, Kedong; Wang, Liansheng; Yu, Hongxia

    2004-03-01

    According to the toxicity mechanism of the individual chemicals, the concentration addition toxicity mechanism is revealed for nonpolar-narcotic-chemical mixtures, polar-narcotic-chemical mixtures and reactive-chemical mixtures, respectively. For nonpolar-narcotic-chemical mixtures, the partitioning of individual chemicals from water to biophase was determined, and the result shows that their concentration additive effect results from no competitive partitioning among individual chemicals. For polar-narcotic-chemical mixtures, their toxicity are contributed by two factors (the total baseline toxicity and the hydrogen bond donor activity of individual chemicals), and it is the concentration additive effect for either of these two factors that leads to their concentration addition toxicity. In addition, the interactions between the reactive chemicals and the biological macromolecules are discussed thoroughly. The results suggest that the net effect of these interactions is zero, and it is this zero net effect that leads to the concentration addition toxicity mechanism for reactive-chemical mixtures.

  2. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1988-11-14

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies including temperature programmed desorption, infrared study of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas.

  3. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1990-07-01

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow us to sue chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. (VC)

  4. A review of selected chemical additives in cosmetic products.

    PubMed

    Juhász, Margit Lai Wun; Marmur, Ellen S

    2014-01-01

    The addition of chemical additives to consumer cosmetic products is a common practice to increase cosmetic effectiveness, maintain cosmetic efficacy, and produce a longer-lasting, more viable product. Recently, manufacturers have come under attack for the addition of chemicals including dioxane, formaldehyde, lead/lead acetate, parabens, and phthalate, as these additives may prove harmful to consumer health. Although reports show that these products may indeed adversely affect human health, these studies are conducted using levels of the aforementioned chemicals at much higher levels of exposure than those found in cosmetic products. When cosmeceuticals are used as per manufacturer's instructions, it is estimated that the levels of harmful additives found in these products are considerably lower than reported toxic concentrations.

  5. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1990-11-01

    The objective of this research is to elucidate the role of additives on the ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow them to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. 49 refs., 6 figs., 3 tabs.

  6. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1989-02-04

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used will include S, P, Ag, Cu, Mn, and Na. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of studies including temperature programmed desorption, infrared study of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. A better understanding of the role of additive may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. CO insertion is known to be a key step to the formation of acetaldehyde and ethanol from CO hydrogenation over Rh catalysts. Ethylene hydroformylation has often served as a probe to determine CO insertion capabilities of Rh catalysts. The mechanism of CO insertion in ethylene hydroformylation over Rh/SiO{sub 2} was investigated.

  7. Downhole chemical addition owing to convection in annular liquid

    SciTech Connect

    Babu, D.R.; Dhodapkar, P.K.; Pradhan, S.P.; Sharma, A.N.

    1994-03-01

    Production of waxy crude oils normally is associated with such operational problems as wax deposition in the tubulars and gelling of flowlines. Different methods are available to control wax deposition. Continuous addition of certain chemicals at low dosages to the well is popular because it reduces oil viscosity and other downstream problems. These chemicals, known as pour-point depressants (PPD's), remain in semisolid state at ambient temperatures. During winter, the chemical solution needs more expensive solvents or heating to maintain its fluidity. To avoid the costs involved in the surface setup and its maintenance and monitoring, the authors tried a simple method in a few pumping wells with satisfactory results. In this method, the oil column in the casing above the pump suction depth is replaced with a chemical solution. Density of the solution is maintained below that of the produced liquid. This prevents gravity swapping and ensures the presence of a chemical reservoir within the wellbore. When the pump is in operation, the temperature of the tubing's outer surface is a few degrees higher than that of the casing's inner surface. Natural convection currents occur in the liquid trapped between the two surfaces. The liquid rises along the tubing and moves in the opposite direction near the casing. Near the pump suction level, a constant exchange of mass between the crude entering the pump and the chemical reservoir takes place.

  8. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... information it requires for the Advance Publication, Coordination and Notification of frequency assignments..., with respect to individual administrations, by successfully completing coordination agreements. Any... terms and conditions as required to effect coordination of the frequency assignments with...

  9. Additives initiate selective production of chemicals from biomass pyrolysis.

    PubMed

    Leng, Shuai; Wang, Xinde; Wang, Lei; Qiu, Huizhe; Zhuang, Guilin; Zhong, Xing; Wang, Jianguo; Ma, Fengyun; Liu, Jingmei; Wang, Qiang

    2014-03-01

    To improve chemicals selectivity under low temperature, a new method that involves the injection of additives into biomass pyrolysis is introduced. This method allows biomass pyrolysis to achieve high selectivity to chemicals under low temperature (300°C), while nothing was obtained in typical pyrolysis under 300°C. However, by using the new method, the first liquid drop emerged at the interval between 140°C and 240°C. Adding methanol to mushroom scrap pyrolysis obtained high selectivity to acetic acid (98.33%), while adding ethyl acetate gained selectivity to methanol (65.77%) in bagasse pyrolysis and to acetone (72.51%) in corncob pyrolysis. Apart from basic chemicals, one high value-added chemical (2,3-dihydrobenzofuran) was also detected, which obtained the highest selectivity (10.33%) in corncob pyrolysis through the addition of ethyl acetate. Comparison of HZSM-5 and CaCO3 catalysis showed that benzene emerged in the liquid because of the larger degree of cracking and hydrodeoxygenation over HZSM-5. PMID:24508091

  10. Additives initiate selective production of chemicals from biomass pyrolysis.

    PubMed

    Leng, Shuai; Wang, Xinde; Wang, Lei; Qiu, Huizhe; Zhuang, Guilin; Zhong, Xing; Wang, Jianguo; Ma, Fengyun; Liu, Jingmei; Wang, Qiang

    2014-03-01

    To improve chemicals selectivity under low temperature, a new method that involves the injection of additives into biomass pyrolysis is introduced. This method allows biomass pyrolysis to achieve high selectivity to chemicals under low temperature (300°C), while nothing was obtained in typical pyrolysis under 300°C. However, by using the new method, the first liquid drop emerged at the interval between 140°C and 240°C. Adding methanol to mushroom scrap pyrolysis obtained high selectivity to acetic acid (98.33%), while adding ethyl acetate gained selectivity to methanol (65.77%) in bagasse pyrolysis and to acetone (72.51%) in corncob pyrolysis. Apart from basic chemicals, one high value-added chemical (2,3-dihydrobenzofuran) was also detected, which obtained the highest selectivity (10.33%) in corncob pyrolysis through the addition of ethyl acetate. Comparison of HZSM-5 and CaCO3 catalysis showed that benzene emerged in the liquid because of the larger degree of cracking and hydrodeoxygenation over HZSM-5.

  11. Mining chemical information from open patents

    PubMed Central

    2011-01-01

    Linked Open Data presents an opportunity to vastly improve the quality of science in all fields by increasing the availability and usability of the data upon which it is based. In the chemical field, there is a huge amount of information available in the published literature, the vast majority of which is not available in machine-understandable formats. PatentEye, a prototype system for the extraction and semantification of chemical reactions from the patent literature has been implemented and is discussed. A total of 4444 reactions were extracted from 667 patent documents that comprised 10 weeks' worth of publications from the European Patent Office (EPO), with a precision of 78% and recall of 64% with regards to determining the identity and amount of reactants employed and an accuracy of 92% with regards to product identification. NMR spectra reported as product characterisation data are additionally captured. PMID:21999425

  12. Information Content of Turbulent Chemical Plumes

    NASA Astrophysics Data System (ADS)

    Webster, D. R.; Roberts, P. J. W.; Rahman, S.; Dasi, L. P.

    1999-11-01

    The rapid decrease in concentration contaminants released into the natural environment due to turbulent diffusion has traditionally been modeled based on time-averaged quantities. In contrast to the time-averaged concentration characteristics, the instantaneous characteristics and information content are poorly understood. Instantaneous peak levels are important in many contexts, including the impact of contaminants on organisms and the local ecosystem. The current work is motivated by the need to understand how aquatic organisms, such as blue crabs, search for and locate turbulent chemical odor plume sources. A fundamental question is what information is available to an animal or observer indicating its relative position to the plume source. In this study, the chemical plume is released iso-kinetically into a fully-developed, uniform open channel flow at 50 mm/s. Instantaneous concentration and velocity fields are simultaneously measured using planar laser induced fluorescence (PLIF) and digital particle tracking velocimetry (DPTV), respectively. In addition to the mean and variance, quantities of interest include intermittency, the temporal rise slope of chemical concentration and spatial correlations.

  13. Automated determination of chemical functionalisation addition routes based on magnetic susceptibility and nucleus independent chemical shifts

    NASA Astrophysics Data System (ADS)

    Van Lier, G.; Ewels, C. P.; Geerlings, P.

    2008-07-01

    We present a modified version of our previously reported meta-code SACHA, for systematic analysis of chemical addition. The code automates the generation of structures, running of quantum chemical codes, and selection of preferential isomers based on chosen selection rules. While the selection rules for the previous version were based on the total system energy, predicting purely thermodynamic addition patterns, we examine here the possibility of using other system parameters, notably magnetic susceptibility as a descriptor of global aromaticity, and nucleus independent chemical shifts (NICS) as local aromaticity descriptor.

  14. 17 CFR 240.12b-20 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Additional information. 240... Securities Exchange Act of 1934 General Requirements As to Contents § 240.12b-20 Additional information. In addition to the information expressly required to be included in a statement or report, there shall...

  15. 17 CFR 270.8b-20 - Additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Additional information. 270.8b...) RULES AND REGULATIONS, INVESTMENT COMPANY ACT OF 1940 § 270.8b-20 Additional information. In addition to the information expressly required to be included in a registration statement or report, there...

  16. 29 CFR 2570.39 - Opportunities to submit additional information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 9 2011-07-01 2011-07-01 false Opportunities to submit additional information. 2570.39... Prohibited Transaction Exemption Applications § 2570.39 Opportunities to submit additional information. (a) An applicant may notify the Department of its intent to submit additional information supporting...

  17. A survey of chemical information systems

    NASA Technical Reports Server (NTRS)

    Dominick, Wayne D. (Editor); Shaikh, Aneesa Bashir

    1985-01-01

    A survey of the features, functions, and characteristics of a fairly wide variety of chemical information storage and retrieval systems currently in operation is given. The types of systems (together with an identification of the specific systems) addressed within this survey are as follows: patents and bibliographies (Derwent's Patent System; IFI Comprehensive Database; PULSAR); pharmacology and toxicology (Chemfile; PAGODE; CBF; HEEDA; NAPRALERT; MAACS); the chemical information system (CAS Chemical Registry System; SANSS; MSSS; CSEARCH; GINA; NMRLIT; CRYST; XTAL; PDSM; CAISF; RTECS Search System; AQUATOX; WDROP; OHMTADS; MLAB; Chemlab); spectra (OCETH; ASTM); crystals (CRYSRC); and physical properties (DETHERM). Summary characteristics and current trends in chemical information systems development are also examined.

  18. Identification of Chemical Toxicity Using Ontology Information of Chemicals.

    PubMed

    Jiang, Zhanpeng; Xu, Rui; Dong, Changchun

    2015-01-01

    With the advance of the combinatorial chemistry, a large number of synthetic compounds have surged. However, we have limited knowledge about them. On the other hand, the speed of designing new drugs is very slow. One of the key causes is the unacceptable toxicities of chemicals. If one can correctly identify the toxicity of chemicals, the unsuitable chemicals can be discarded in early stage, thereby accelerating the study of new drugs and reducing the R&D costs. In this study, a new prediction method was built for identification of chemical toxicities, which was based on ontology information of chemicals. By comparing to a previous method, our method is quite effective. We hope that the proposed method may give new insights to study chemical toxicity and other attributes of chemicals.

  19. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  20. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.; Pien, S.I.

    1991-06-01

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativeities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. CO insertion is known to be a key step to the formation of acetaldehyde and ethanol from CO hydrogenation. Reaction of ethylene with syngas is used as a probe to determine CO insertion capabilities of metal catalysts. During the sixth quarter of the project, the mechanism of CO insertion on Ni/SiO{sub 2} was investigated by in-situ infrared spectroscopy. Ni/SiO{sub 2}, a methanation catalyst, has been shown to exhibit CO insertion activity. In situ infrared studies of CO/H{sub 2} and C{sub 2}H{sub 4}/CO/H{sub 2} reactions show that the carbonylation of Ni/SiO{sub 2} to Ni(CO){sub 4} leads to an inhibition of methanation in CO hydrogenation but an enhancement of formation of propionaldehyde in C{sub 2}H{sub 4}/CO/H{sub 2} reaction. The results suggest that the sites for propionaldehyde formation is different from those for methanation.

  1. Thyroid disrupting chemicals in plastic additives and thyroid health.

    PubMed

    Andra, Syam S; Makris, Konstantinos C

    2012-01-01

    The globally escalating thyroid nodule incidence rates may be only partially ascribed to better diagnostics, allowing for the assessment of environmental risk factors on thyroid disease. Endocrine disruptors or thyroid-disrupting chemicals (TDC) like bisphenol A, phthalates, and polybrominated diphenyl ethers are widely used as plastic additives in consumer products. This comprehensive review studied the magnitude and uncertainty of TDC exposures and their effects on thyroid hormones for sensitive subpopulation groups like pregnant women, infants, and children. Our findings qualitatively suggest the mixed, significant (α = 0.05) TDC associations with natural thyroid hormones (positive or negative sign). Future studies should undertake systematic meta-analyses to elucidate pooled TDC effect estimates on thyroid health indicators and outcomes. PMID:22690712

  2. 78 FR 16698 - Chemical Facility Anti-Terrorism Standards (CFATS) Chemical-Terrorism Vulnerability Information...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-18

    ... Information (CVI) for an additional 30 days for public comments. \\1\\ See 77 FR 74685. The 60-day Federal... statutory mandate at 72 FR 17688. Section 550 of the Homeland Security Appropriations Act of 2007 requires a... SECURITY Chemical Facility Anti-Terrorism Standards (CFATS) Chemical- Terrorism Vulnerability...

  3. 43 CFR 3430.4-2 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Additional information. 3430.4-2 Section... Leases § 3430.4-2 Additional information. (a) If the applicant for a preference right lease has submitted timely, some, but not all of the information required in § 3430.4-1 of this title, the authorized...

  4. 34 CFR 303.212 - Additional information and assurances.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... system as required by section 427(b) of GEPA; and (b) Other information and assurances as the Secretary... 34 Education 2 2012-07-01 2012-07-01 false Additional information and assurances. 303.212 Section... Additional information and assurances. Each application must contain— (a) A description of the steps...

  5. 34 CFR 303.212 - Additional information and assurances.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... system as required by section 427(b) of GEPA; and (b) Other information and assurances as the Secretary... 34 Education 2 2014-07-01 2013-07-01 true Additional information and assurances. 303.212 Section... Additional information and assurances. Each application must contain— (a) A description of the steps...

  6. 29 CFR 2570.39 - Opportunities to submit additional information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 9 2012-07-01 2012-07-01 false Opportunities to submit additional information. 2570.39... Processing of Prohibited Transaction Exemption Applications § 2570.39 Opportunities to submit additional information. (a) An applicant may notify the Department of its intent to submit additional...

  7. 29 CFR 2570.39 - Opportunities to submit additional information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 9 2014-07-01 2014-07-01 false Opportunities to submit additional information. 2570.39... Processing of Prohibited Transaction Exemption Applications § 2570.39 Opportunities to submit additional information. (a) An applicant may notify the Department of its intent to submit additional...

  8. 29 CFR 2570.39 - Opportunities to submit additional information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 9 2013-07-01 2013-07-01 false Opportunities to submit additional information. 2570.39... Processing of Prohibited Transaction Exemption Applications § 2570.39 Opportunities to submit additional information. (a) An applicant may notify the Department of its intent to submit additional...

  9. DETAIL OF PLAQUE WITH ADDITIONAL DESIGN AND CONSTRUCTION INFORMATION, SOUTHEAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF PLAQUE WITH ADDITIONAL DESIGN AND CONSTRUCTION INFORMATION, SOUTHEAST ABUTMENT - Connecticut Avenue Bridge, Spans Rock Creek & Potomac Parkway at Connecticut Avenue, Washington, District of Columbia, DC

  10. NMR characterization of cellulose acetate: chemical shift assignments, substituent effects, and chemical shift additivity.

    PubMed

    Kono, Hiroyuki; Hashimoto, Hisaho; Shimizu, Yuuichi

    2015-03-15

    A series of cellulose acetates (CA) with degrees of substitution (DS) ranging from 2.92-0.92 dissolved in dimethylsulfoxide (DMSO)-d6 and cellulose dissolved in tetrabutylammonium fluoride (TBAF)/DMSO-d6 were investigated by two-dimensional NMR spectroscopy. The NMR spectroscopic analysis allowed the determination of the (1)H and (13)C NMR chemical shifts of the eight anhydroglucose units (AGUs) that contain CA: 2,3,6-tri-, 2,3-di-, 2,6-di-, 3,6-di-, 2-mono-, 3-mono-, 6-mono-, and unacetylated AGUs. A comparative analysis of the chemical shift data revealed the substituent effect of acetyl groups at the 2-, 3-, and 6-positions on the (1)H and (13)C nuclei in the same AGU. In addition, chemical shift additivity could be applied to the (1)H and (13)C chemical shifts of CA because the chemical shifts of the diacetylated and triacetylated AGUs could be almost completely explained by the acetyl substituent effects at the 2-, 3-, and 6-positions.

  11. 19 CFR 111.60 - Request for additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Request for additional information. 111.60 Section 111.60 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... particular language of the proposed statement of charges as to which additional information is needed. If...

  12. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk...

  13. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk...

  14. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk...

  15. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk...

  16. 40 CFR 141.154 - Required additional health information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Required additional health information... Required additional health information. (a) All reports must prominently display the following language... from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk...

  17. 10 CFR 71.39 - Requirement for additional information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Requirement for additional information. 71.39 Section 71.39 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE MATERIAL Application for Package Approval § 71.39 Requirement for additional information. The...

  18. Hematite Surface Activation by Chemical Addition of Tin Oxide Layer.

    PubMed

    Carvalho, Waldemir M; Souza, Flavio L

    2016-09-01

    In this study, the effect of tin (Sn(4+) ) modification on the surface of hematite electrodes synthesized by an aqueous solution route at different times (2, 5, 10, 18, and 24 h) is investigated. As confirmed from X-ray diffraction results, the as-synthesized electrode exhibits an oxyhydroxide phase, which is converted into a pure hematite phase after being subjected to additional thermal treatment at 750 °C for 30 min. The tin-modified hematite electrode is prepared by depositing a solution of Sn(4+) precursor on the as-synthesized electrode, followed by thermal treatment under the same abovementioned conditions. This modification results in an enhancement of the photocurrent response for all hematite electrodes investigated and attains the highest values of around 1.62 and 2.3 mA cm(-2) at 1.23 and 1.4 V versus RHE, respectively, for electrodes obtained in short synthesis times (2 h). Contact angle measurements suggest that the deposition of Sn(4+) on the hematite electrode provides a more hydrophilic surface, which favors a chemical reaction at the interface between the electrode and electrolyte. This result generates new perspectives for understanding the deposition of Sn(4+) on the hematite electrode surface, which is in contrast with several studies previously reported; these studies state that the enhancement in photocurrent density is related to either the induction of an increased donor charge density or shift in the flat-band potential, which favors charge separation.

  19. A Public Opinion Survey on Correctional Education: Does Additional Information on Efficacy Lead to Additional Support?

    ERIC Educational Resources Information Center

    Waterland, Keri Lynn

    2009-01-01

    Though much research has been done on the efficacy of correctional education on reducing recidivism rates for prison inmates, there is little research on the effect that information about the efficacy of correctional education has on public opinion. This study examined whether providing additional information regarding the efficacy of correctional…

  20. 21 CFR 807.26 - Additional listing information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... FDA electronic device registration and listing system. Electronic submissions of such information must...) MEDICAL DEVICES ESTABLISHMENT REGISTRATION AND DEVICE LISTING FOR MANUFACTURERS AND INITIAL IMPORTERS OF DEVICES Procedures for Device Establishments § 807.26 Additional listing information. (a) Each owner...

  1. 21 CFR 807.26 - Additional listing information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... FDA electronic device registration and listing system. Electronic submissions of such information must...) MEDICAL DEVICES ESTABLISHMENT REGISTRATION AND DEVICE LISTING FOR MANUFACTURERS AND INITIAL IMPORTERS OF DEVICES Procedures for Device Establishments § 807.26 Additional listing information. (a) Each owner...

  2. Value Addition in Information Technology and Literacy: An Empirical Investigation

    ERIC Educational Resources Information Center

    Sanghera, Kamaljeet K.

    2009-01-01

    The purpose of the research is to analyze the value addition in students' information communication and technology (ICT) literacy level and confidence in using technology after completing a general education information technology course at a four-year university. An online survey was created to examine students' perceptions. The findings revealed…

  3. 28 CFR 4.4 - Supporting affidavit; additional information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... EMPLOYEE RETIREMENT INCOME SECURITY ACT OF 1974 § 4.4 Supporting affidavit; additional information. (a... together with any other person and the amount and source of all income during the immediately preceding five calendar years plus income to date of application. (12) Any other information which the...

  4. Chemical Biological Emergency Management Information System

    2004-06-15

    CB-EMIS is designed to provide information and analysis to transit system operators and emergency responders in the event of a chemical attack on a subway system. The software inforporates detector data, video images, train data, meteorological data, and above- and below-ground plume dispersion models, hight of the liquid level.

  5. Chemical generation and modification of peptides containing multiple dehydroalanines† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5cc05469a Click here for additional data file.

    PubMed Central

    Morrison, Philip M.; Foley, Patrick J.; Warriner, Stuart L.

    2015-01-01

    Chemical formation of dehydroalanine has been widely used for the post-translational modification of proteins and peptides, however methods to incorporate multiple dehydroalanine residues into a single peptide have not been defined. We report the use of methyl 2,5-dibromovalerate which can be used to cleanly carry out this transformation. PMID:26219458

  6. Toxicological information series, IV. Information resources for chemical emergency response.

    PubMed

    Decker, W J

    1990-08-01

    The need for rapidly available information by community agencies responding to chemical emergencies (leaks, spills, releases, fires, explosions, etc.) can be met by a number of resources. These resources include local poison control centers, the Toxicology Data Network (National Library of Medicine), the Agency for Toxic Substances and Disease Registry, ATSDR/NLM's ANSWER, the National Chemical Response and Information Center, the National Pesticide Telecommunications Network, The National Response Center (U.S. Coast Guard), the Federal Emergency Management Agency, the U.S. Environmental Protection Agency, the National Safety Council, private-sector database vendors, and textbooks addressing hazardous substances.

  7. Progressively Fostering Students' Chemical Information Skills in a Three-Year Chemical Engineering Program in France

    ERIC Educational Resources Information Center

    Gozzi, Christel; Arnoux, Marie-Jose´; Breuzard, Jere´my; Marchal, Claire; Nikitine, Clémence; Renaudat, Alice; Toulgoat, Fabien

    2016-01-01

    Literature searches are essential for scientists. Thus, courses on how to do a good literature search have been integrated in studies at CPE Lyon for many years. Recently, we modified our pedagogical approach in order to initiate students progressively in the search for chemical information. In addition, this new teaching organization is now based…

  8. Review and evaluation of literature on testing of chemical additives for scale control in geothermal fluids. Final report

    SciTech Connect

    Crane, C.H.; Kenkeremath, D.C.

    1981-01-01

    A selected group of reported tests of chemical additives in actual geothermal fluids are reviewed and evaluated to summarize the status of chemical scale-control testing and identify information and testing needs. The task distinguishes between scale control in the cooling system of a flash plant and elsewhere in the utilization system due to the essentially different operating environments involved. Additives for non-cooling geothermal fluids are discussed by scale type: silica, carbonate, and sulfide.

  9. The effect of chemical additives on the synthesis of ethanol

    SciTech Connect

    Chuang, S.S.C.

    1992-03-06

    The objective of this research was to investigate the reaction mechanism of higher alcohol and aldehyde synthesis from syngas and the role of additives in the synthesis. An in situ IR reaction system and probe molecule technique were developed to study adsorbed species, active sites, and reaction pathway during reaction. The catalysts used for this study included silica-supported Rh, Ru, and Ni. (VC)

  10. 25 CFR 215.17 - Additional information required.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Additional information required. 215.17 Section 215.17 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING... interested in lead and zinc mining leases, or land under the jurisdiction of the Quapaw Indian Agency,...

  11. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire Leases §...

  12. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire...

  13. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire...

  14. 46 CFR 535.606 - Requests for additional information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Requests for additional information. 535.606 Section 535.606 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE OCEAN COMMON CARRIER AND MARINE TERMINAL OPERATOR AGREEMENTS SUBJECT TO THE SHIPPING ACT OF 1984...

  15. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL...

  16. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire...

  17. 25 CFR 227.7 - Additional information from applicant.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Additional information from applicant. 227.7 Section 227.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEASING OF CERTAIN LANDS IN WIND RIVER INDIAN RESERVATION, WYOMING, FOR OIL AND GAS MINING How to Acquire...

  18. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL...

  19. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL...

  20. 21 CFR 207.31 - Additional drug listing information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Additional drug listing information. 207.31 Section 207.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL REGISTRATION OF PRODUCERS OF DRUGS AND LISTING OF DRUGS IN COMMERCIAL...

  1. 49 CFR 235.12 - Additional required information-prints.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... OR MATERIAL MODIFICATION OF A SIGNAL SYSTEM OR RELIEF FROM THE REQUIREMENTS OF PART 236 § 235.12... application should be shown uncolored. (Approved by the Office of Management and Budget under control number... 49 Transportation 4 2010-10-01 2010-10-01 false Additional required information-prints....

  2. 38 CFR 39.3 - Decisionmakers, notifications, and additional information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Decisionmakers, notifications, and additional information. 39.3 Section 39.3 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) AID TO STATES FOR ESTABLISHMENT, EXPANSION, AND IMPROVEMENT...

  3. Trends in information theory-based chemical structure codification.

    PubMed

    Barigye, Stephen J; Marrero-Ponce, Yovani; Pérez-Giménez, Facundo; Bonchev, Danail

    2014-08-01

    This report offers a chronological review of the most relevant applications of information theory in the codification of chemical structure information, through the so-called information indices. Basically, these are derived from the analysis of the statistical patterns of molecular structure representations, which include primitive global chemical formulae, chemical graphs, or matrix representations. Finally, new approaches that attempt to go "back to the roots" of information theory, in order to integrate other information-theoretic measures in chemical structure coding are discussed.

  4. Representation of chemical information in OASIS centralized 3D database for existing chemicals.

    PubMed

    Nikolov, Nikolai; Grancharov, Vanio; Stoyanova, Galya; Pavlov, Todor; Mekenyan, Ovanes

    2006-01-01

    The present inventory of existing chemicals in regulatory agencies in North America and Europe, encompassing the chemicals of the European Chemicals Bureau (EINECS, with 61 573 discrete chemicals); the Danish EPA (159 448 chemicals); the U.S. EPA (TSCA, 56 882 chemicals; HPVC, 10 546 chemicals) and pesticides' active and inactive ingredients of the U.S. EPA (1379 chemicals); the Organization for Economic Cooperation and Development (HPVC, 4750 chemicals); Environment Canada (DSL, 10851 chemicals); and the Japanese Ministry of Economy, Trade, and Industry (16811), was combined in a centralized 3D database for existing chemicals. The total number of unique chemicals from all of these databases exceeded 185 500. Defined and undefined chemical mixtures and polymers are handled, along with discrete (hydrolyzing and nonhydrolyzing) chemicals. The database manager provides the storage and retrieval of chemical structures with 2D and 3D data, accounting for molecular flexibility by using representative sets of conformers for each chemical. The electronic and geometric structures of all conformers are quantum-chemically optimized and evaluated. Hence, the database contains over 3.7 million 3D records with hundreds of millions of descriptor data items at the levels of structures, conformers, or atoms. The platform contains a highly developed search subsystem--a search is possible on Chemical Abstracts Service numbers; names; 2D and 3D fragment searches; structural, conformational, or atomic properties; affiliation in other chemical databases; structure similarity; logical combinations; saved queries; and search result exports. Models (collections of logically related descriptors) are supported, including information on a model's author, date, bioassay, organs/tissues, conditions, administration, and so forth. Fragments can be interactively constructed using a visual structure editor. A configurable database browser is designed for the inspection and editing of all types of

  5. Representation of chemical information in OASIS centralized 3D database for existing chemicals.

    PubMed

    Nikolov, Nikolai; Grancharov, Vanio; Stoyanova, Galya; Pavlov, Todor; Mekenyan, Ovanes

    2006-01-01

    The present inventory of existing chemicals in regulatory agencies in North America and Europe, encompassing the chemicals of the European Chemicals Bureau (EINECS, with 61 573 discrete chemicals); the Danish EPA (159 448 chemicals); the U.S. EPA (TSCA, 56 882 chemicals; HPVC, 10 546 chemicals) and pesticides' active and inactive ingredients of the U.S. EPA (1379 chemicals); the Organization for Economic Cooperation and Development (HPVC, 4750 chemicals); Environment Canada (DSL, 10851 chemicals); and the Japanese Ministry of Economy, Trade, and Industry (16811), was combined in a centralized 3D database for existing chemicals. The total number of unique chemicals from all of these databases exceeded 185 500. Defined and undefined chemical mixtures and polymers are handled, along with discrete (hydrolyzing and nonhydrolyzing) chemicals. The database manager provides the storage and retrieval of chemical structures with 2D and 3D data, accounting for molecular flexibility by using representative sets of conformers for each chemical. The electronic and geometric structures of all conformers are quantum-chemically optimized and evaluated. Hence, the database contains over 3.7 million 3D records with hundreds of millions of descriptor data items at the levels of structures, conformers, or atoms. The platform contains a highly developed search subsystem--a search is possible on Chemical Abstracts Service numbers; names; 2D and 3D fragment searches; structural, conformational, or atomic properties; affiliation in other chemical databases; structure similarity; logical combinations; saved queries; and search result exports. Models (collections of logically related descriptors) are supported, including information on a model's author, date, bioassay, organs/tissues, conditions, administration, and so forth. Fragments can be interactively constructed using a visual structure editor. A configurable database browser is designed for the inspection and editing of all types of

  6. Censored data treatment using additional information in intelligent medical systems

    NASA Astrophysics Data System (ADS)

    Zenkova, Z. N.

    2015-11-01

    Statistical procedures are a very important and significant part of modern intelligent medical systems. They are used for proceeding, mining and analysis of different types of the data about patients and their diseases; help to make various decisions, regarding the diagnosis, treatment, medication or surgery, etc. In many cases the data can be censored or incomplete. It is a well-known fact that censorship considerably reduces the efficiency of statistical procedures. In this paper the author makes a brief review of the approaches which allow improvement of the procedures using additional information, and describes a modified estimation of an unknown cumulative distribution function involving additional information about a quantile which is known exactly. The additional information is used by applying a projection of a classical estimator to a set of estimators with certain properties. The Kaplan-Meier estimator is considered as an estimator of the unknown cumulative distribution function, the properties of the modified estimator are investigated for a case of a single right censorship by means of simulations.

  7. The Indiana University Chemical Information Center Program of Chemical Literature Instruction.

    ERIC Educational Resources Information Center

    Wiggins, Gary

    1982-01-01

    Describes three chemical information science courses offered by Indiana University (IU) Department of Chemistry. Also describes goals and operation of IU's Chemical Information Center, created to implement online searching of chemical databases and to assume operation of the IU dissemination of information services based on Chemical Abstracts…

  8. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... additionally planned production of Schedule 3 chemicals. 714.3 Section 714.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3...

  9. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... additionally planned production of Schedule 3 chemicals. 714.3 Section 714.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3...

  10. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... additionally planned production of Schedule 3 chemicals. 714.3 Section 714.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3...

  11. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... additionally planned production of Schedule 3 chemicals. 714.3 Section 714.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3...

  12. 15 CFR 714.3 - Advance declaration requirements for additionally planned production of Schedule 3 chemicals.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... additionally planned production of Schedule 3 chemicals. 714.3 Section 714.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS ACTIVITIES INVOLVING SCHEDULE 3 CHEMICALS § 714.3...

  13. Challenges and Benefits of Chemical Information Service in Industry.

    ERIC Educational Resources Information Center

    Hansen, Mary E.; Curtis, Jan M.

    1997-01-01

    Discusses chemical information services offered in industrial chemical libraries, based on experiences at the 3M Library. Topics include qualifications of chemical information professionals; corporate culture; clients; services, including reference, current awareness, confidentiality, and end-user support; and information resources, including…

  14. MIXTURES OF THYROID DISRUPTING CHEMICALS: TESTING ADDITIVITY OF HEPATIC INDUCERS AND THYROID PEROXIDASE INHIBITORS.

    EPA Science Inventory

    Humans are exposed to chemical mixtures via diet, occupation, and the environment. Previous data demonstrated that low doses of polycyclic halogenated aromatic hydrocarbons (PHAHs) acting through similar mechanisms result in an additive reduction of thyroxine (T4). If xenobioti...

  15. A new approach to NMR chemical shift additivity parameters using simultaneous linear equation method.

    PubMed

    Shahab, Yosif A; Khalil, Rabah A

    2006-10-01

    A new approach to NMR chemical shift additivity parameters using simultaneous linear equation method has been introduced. Three general nitrogen-15 NMR chemical shift additivity parameters with physical significance for aliphatic amines in methanol and cyclohexane and their hydrochlorides in methanol have been derived. A characteristic feature of these additivity parameters is the individual equation can be applied to both open-chain and rigid systems. The factors that influence the (15)N chemical shift of these substances have been determined. A new method for evaluating conformational equilibria at nitrogen in these compounds using the derived additivity parameters has been developed. Conformational analyses of these substances have been worked out. In general, the results indicate that there are four factors affecting the (15)N chemical shift of aliphatic amines; paramagnetic term (p-character), lone pair-proton interactions, proton-proton interactions, symmetry of alkyl substituents and molecular association.

  16. Information System for Environmental Chemicals: Training for End Users.

    ERIC Educational Resources Information Center

    Voigt, Kristina; And Others

    1991-01-01

    Discusses factors to consider in identifying and accessing appropriate data sources for environmental chemical information and describes three training programs for end-users: (1) a course on retrieval of information on dangerous substances; (2) a seminar on German offline databases on chemicals; and (3) a workshop on the Information System for…

  17. Survey of Ongoing Federal Chemical Information and Data Systems.

    ERIC Educational Resources Information Center

    Thompson (John I.) and Co., Washington, DC.

    The purpose of the survey was to collect data relating to (1) present usage of chemical information and data in the Federal community; (2) techniques and equipment now used in the acquisition, processing, and transmission of information and data; and (3) direction of plans for future chemical information services at ongoing systems. The scope of…

  18. Chemical information from the source function.

    PubMed

    Gatti, Carlo; Cargnoni, Fausto; Bertini, Luca

    2003-03-01

    The source function, which enables one to equate the value of the electron density at any point within a molecule to a sum of atomic contributions, has been applied to a number of cases. The source function is a model-independent, quantitative measure of the relative importance of an atom's or group's contribution to the density at any point in a system, and it represents a potentially interesting tool to provide chemical information. It is shown that the source contribution from H to the electron density rho(b) at the bond critical point in HX diatomics decreases with increasing X's electronegativity, and that this decrease is a result of significant changes in the Laplacian distribution within the H-basin. It is also demonstrated that the source function from Li to rho(b) in LiX diatomics is a more sensitive index of atomic transferability than it is the lithium atomic energy or population. The observed changes are such as to ensure a constant percentage source contribution from Li to rho(b) throughout the LiX series, rather than a constant source as one would expect in the limit of perfect atomic transferability. Application of the source function to planar lithium clusters has revealed that the source function clearly discriminates between a nonnuclear electron density maximum and a maximum associated to a nucleus, on the basis of the relative weight of the source contributions from the basin associated to the maximum and from the remaining basins in the cluster. The source function has also allowed for a classification of hydrogen bonds in terms of characteristic source contributions to the density at the H-bond critical point from the H involved in the H-bond, the H-donor D, and the H-acceptor A. The source contribution from the H appears as the most distinctive marker of the H-bond strength, being highly negative for isolated H-bonds, slightly negative for polarized assisted H-bonds, close to zero for resonance-assisted H-bonds, and largely positive for

  19. 76 FR 20992 - Sun Chemical Corp.; Filing of Color Additive Petition

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-14

    ... HUMAN SERVICES Food and Drug Administration Sun Chemical Corp.; Filing of Color Additive Petition AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA) is... Director, Office of Food Additive Safety, Center for Food Safety and Applied Nutrition. BILLING CODE...

  20. 29 CFR 2570.39 - Opportunities to submit additional information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... tentative denial letter. At the same time, the applicant should indicate generally the type of information... penalty of perjury attesting to the truth and correctness of the information provided, which is dated...

  1. 21 CFR 71.4 - Samples; additional information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... samples of the color additive, articles used as components thereof, or of the food, drug, or cosmetic in... additive, or articles used as components thereof, or of the food, drug, or cosmetic in which the color... respect to the safety of the color additive or the physical or technical effect it produces. The date...

  2. 21 CFR 71.4 - Samples; additional information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... samples of the color additive, articles used as components thereof, or of the food, drug, or cosmetic in... additive, or articles used as components thereof, or of the food, drug, or cosmetic in which the color... respect to the safety of the color additive or the physical or technical effect it produces. The date...

  3. Explanation of non-additive effects in mixtures of similar mode of action chemicals.

    PubMed

    Kamo, Masashi; Yokomizo, Hiroyuki

    2015-09-01

    Many models have been developed to predict the combined effect of drugs and chemicals. Most models are classified into two additive models: independent action (IA) and concentration addition (CA). It is generally considered if the modes of action of chemicals are similar then the combined effect obeys CA; however, many empirical studies report nonlinear effects deviating from the predictions by CA. Such deviations are termed synergism and antagonism. Synergism, which leads to a stronger toxicity, requires more careful management, and hence it is important to understand how and which combinations of chemicals lead to synergism. In this paper, three types of chemical reactions are mathematically modeled and the cause of the nonlinear effects among chemicals with similar modes of action was investigated. Our results show that combined effects obey CA only when the modes of action are exactly the same. Contrary to existing knowledge, combined effects are generally nonlinear even if the modes of action of the chemicals are similar. Our results further show that the nonlinear effects vanish out when the chemical concentrations are low, suggesting that the current management procedure of assuming CA is rarely inappropriate because environmental concentrations of chemicals are generally low.

  4. The reaction of an iridium PNP complex with parahydrogen facilitates polarisation transfer without chemical change† †Electronic supplementary information (ESI) available: Sample preparation, signal enhancements and raw data. CCDC 1026865. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c4dt03088e Click here for additional data file. Click here for additional data file.

    PubMed Central

    Holmes, Arthur J.; Rayner, Peter J.; Cowley, Michael J.; Green, Gary G. R.; Whitwood, Adrian C.

    2015-01-01

    The short lived pincer complex [(C5H3N(CH2P(tBu)2)2)Ir(H)2(py)]BF4 is shown to be active for signal amplification by reversible exchange. This catalyst formulation enables the efficient transfer of polarization from parahydrogen to be placed into just a single molecule of the hyperpolarisation target, pyridine. When the catalysts 1H nuclei are replaced by 2H, increased levels of substrate hyperpolarization result and when the reverse situation is examined the catalyst itself is clearly visible through hyperpolarised signals. The ligand exchange pathways of [(C5H3N(CH2P(tBu)2)2)Ir(H)2(py)]BF4 that are associated with this process are shown to involve the formation of 16-electron [(C5H3N(CH2P(tBu)2)2)Ir(H)2]BF4 and the 18-electron H2 addition product [(C5H3N(CH2P(tBu)2)2)Ir(H)2(H2)]BF4. PMID:25410259

  5. Characteristics of comprehensive Chemical Industry Database CD-NET : Centered around chemical product information file

    NASA Astrophysics Data System (ADS)

    Takano, Hideo

    This paper describes Chemical Product Information File of Chemical Industry Database, CD-NET provided by Chemical Data Service Inc.. It defines "information" first, then explains file organization and presents how Chemical product Information File is located in CD-NET. Mentioning its complementary relation with JICST's JOIS-F the author defines the File as chemical product information for business purpose. All of the information items in the File emphasize that it is exactly a type of business and practical database. To distinguish general items from important items by product, all of the information is categorized into II classes by general chemical product and by area. The scope and emphasized items under each class are described in detail.

  6. The effect of lactic acid bacterial starter culture and chemical additives on wilted rice straw silage.

    PubMed

    Wang, Yan-Su; Shi, Wei; Huang, Lin-Ting; Ding, Cheng-Long; Dai, Chuan-Chao

    2016-04-01

    Lactic acid bacteria (LAB) are suitable for rice straw silage fermentation, but have been studied rarely, and rice straw as raw material for ensiling is difficult because of its disadvantages, such as low nutrition for microbial activities and low abundances of natural populations of LAB. So we investigated the effect of application of LAB and chemical additives on the fermentation quality and microbial community of wilted rice straw silage. Treatment with chemical additives increased the concentrations of crude protein (CP), water soluble carbohydrate (WSC), acetic acid and lactic acid, reduced the concentrations of acid detergent fiber (ADF) and neutral detergent fiber (NDF), but did not effectively inhibit the growth of spoilage organisms. Inoculation with LABs did not improve the nutritional value of the silage because of poor growth of LABs in wilted rice straw. Inoculation with LAB and addition of chemical materials improved the quality of silage similar to the effects of addition of chemical materials alone. Growth of aerobic and facultatively anaerobic bacteria was inhibited by this mixed treatment and the LAB gradually dominated the microbial community. In summary, the fermentation quality of wilted rice straw silage had improved by addition of LAB and chemical materials. PMID:26429595

  7. The effect of lactic acid bacterial starter culture and chemical additives on wilted rice straw silage.

    PubMed

    Wang, Yan-Su; Shi, Wei; Huang, Lin-Ting; Ding, Cheng-Long; Dai, Chuan-Chao

    2016-04-01

    Lactic acid bacteria (LAB) are suitable for rice straw silage fermentation, but have been studied rarely, and rice straw as raw material for ensiling is difficult because of its disadvantages, such as low nutrition for microbial activities and low abundances of natural populations of LAB. So we investigated the effect of application of LAB and chemical additives on the fermentation quality and microbial community of wilted rice straw silage. Treatment with chemical additives increased the concentrations of crude protein (CP), water soluble carbohydrate (WSC), acetic acid and lactic acid, reduced the concentrations of acid detergent fiber (ADF) and neutral detergent fiber (NDF), but did not effectively inhibit the growth of spoilage organisms. Inoculation with LABs did not improve the nutritional value of the silage because of poor growth of LABs in wilted rice straw. Inoculation with LAB and addition of chemical materials improved the quality of silage similar to the effects of addition of chemical materials alone. Growth of aerobic and facultatively anaerobic bacteria was inhibited by this mixed treatment and the LAB gradually dominated the microbial community. In summary, the fermentation quality of wilted rice straw silage had improved by addition of LAB and chemical materials.

  8. Chemical Information Literacy at a Liberal Arts College

    ERIC Educational Resources Information Center

    Greco, George E.

    2016-01-01

    Chemistry majors at Goucher College are now required to take a 1-credit course in their sophomore year entitled Chemical Information Literacy. Students in the course learn the structure and organization of the chemical literature, and how to carry out searches of various databases for topic, author, chemical compound, or structure. They learn…

  9. Chemical TOPAZ: Modifications to the heat transfer code TOPAZ: The addition of chemical reaction kinetics and chemical mixtures

    SciTech Connect

    Nichols, A.L. III.

    1990-06-07

    This is a report describing the modifications which have been made to the heat flow code TOPAZ to allow the inclusion of thermally controlled chemical kinetics. This report is broken into parts. The first part is an introduction to the general assumptions and theoretical underpinning that were used to develop the model. The second section describes the changes that have been implemented into the code. The third section is the users manual for the input for the code. The fourth section is a compilation of hints, common errors, and things to be aware of while you are getting started. The fifth section gives a sample problem using the new code. This manual addenda is written with the presumption that most readers are not fluent with chemical concepts. Therefore, we shall in this section endeavor to describe the requirements that must be met before chemistry can occur and how we have modeled the chemistry in the code.

  10. 77 FR 67655 - Agency Information Collection Activities; Proposed Collection; Comment Request; Food Additive...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ... Collection; Comment Request; Food Additive Petitions and Investigational Food Additive Exemptions; Extension... comment in response to the notice. This notice solicits comments on food additive petitions regarding... of information technology. Food Additive Petitions and Investigational Food Additive Exemptions,...

  11. THE IMPORTANCE OF SPATIAL ACCURACY FOR CHEMICAL INFORMATION MANAGEMENT

    EPA Science Inventory

    Information about chemicals can be critical to making timely decisions. The results of these decisions may not be realized for many years. In order to increase the value of chemical information and to create and utilize meaningful environmental models, the Environmental Prote...

  12. Chemical Information Instruction in Academe: Who Is Leading the Charge?

    ERIC Educational Resources Information Center

    Garritano, Jeremy R.; Culp, F. Bartow; Twiss-Brooks, Andrea

    2010-01-01

    Chemical information instruction (CII) has been recommended by the ACS Committee on Professional Training as a necessary component of the chemistry curriculum for both undergraduate and graduate students. Surveys conducted by the ACS Chemical Information Division (CINF) Education Committee in 1984 and 1993 showed the extent that CII had become…

  13. 78 FR 17656 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-22

    ... exemption (TME), and to publish in the Federal Register periodic status reports on the new chemicals under... Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture... Table I. of this unit, EPA provides the following information (to the extent that such information...

  14. 78 FR 51265 - 30-Day Notice of Proposed Information Collection: Application for Additional Visa Pages or...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-20

    ... Notice of Proposed Information Collection: Application for Additional Visa Pages or Miscellaneous...: Title of Information Collection: Application for Additional Visa Pages or Miscellaneous Passport... applies for the addition of visa pages to that passport, the Department must confirm the...

  15. 21 CFR 71.4 - Samples; additional information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... respect to the safety of the color additive or the physical or technical effect it produces. The date used for computing the 90-day limit for the purposes of section 721(d)(1) of the act shall be moved...

  16. 21 CFR 71.4 - Samples; additional information.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... respect to the safety of the color additive or the physical or technical effect it produces. The date used for computing the 90-day limit for the purposes of section 721(d)(1) of the act shall be moved...

  17. ASTM Data Banks and Chemical Information Sources

    ERIC Educational Resources Information Center

    Batik, Albert; Hale, Eleanor

    1972-01-01

    Among the data described are infrared indexes, mass spectral data, chromatographic data, X-ray emmission data, odor and taste threshold data, and thermodynamics data. This paper provides the chemical documentarian a complete reference source to a wide variety of analytical data. (Author/NH)

  18. Introducing Graduate Students to the Chemical Information Landscape: The Ongoing Evolution of a Graduate-Level Chemical Information Course

    ERIC Educational Resources Information Center

    Currano, Judith N.

    2016-01-01

    The University of Pennsylvania's doctoral chemistry curriculum has included a required course in chemical information since 1995. Twenty years later, the course has evolved from a loosely associated series of workshops on information resources to a holistic examination of the chemical literature and its place in the general research process. The…

  19. Roseopurpurins: Chemical Diversity Enhanced by Convergent Biosynthesis and Forward and Reverse Michael Additions.

    PubMed

    Shang, Zhuo; Khalil, Zeinab; Li, Li; Salim, Angela A; Quezada, Michelle; Kalansuriya, Pabasara; Capon, Robert J

    2016-09-01

    Cultures of the estuarine fungus Penicillium roseopurpureum (CMB-MF038) yielded a diverse array of polyketides, many of which were related via a highly convergent biosynthetic pathway. In addition to revising and assigning structures, and documenting chemical and biological properties, pro-drug cytotoxic properties were attributed to roseopurpurins H (10) and I (11) on the basis of in situ reverse Michael addition to a cytotoxic Michael acceptor (12). PMID:27537356

  20. Chemical compounds to be used as solid carriers for fuel additives

    SciTech Connect

    Santambrogio, A.; Mattei, L.

    1987-09-08

    This patent describes compositions of dosing additives to fuel for internal combustion engines, comprising (1) solid carrier chemical compounds, which have a melting point between 70/sup 0/C and 130/sup 0/C, are soluble in hydrocarbons and are selected from the group consisting of alkyl-substituted phenols, aromatic carbonates, alkyl-substituted pyrocatechols, and polymers of alkyl-substituted 1,2-dihydroquinoline; and (2) additives for fuel for internal combustion engines which are liquid at room temperature.

  1. 78 FR 68461 - Guidance for Industry: Studies To Evaluate the Utility of Anti-Salmonella Chemical Food Additives...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ... Anti- Salmonella Chemical Food Additives in Feeds; Request for Comments AGENCY: Food and Drug... Chemical Food Additives in Feeds,'' and is seeking comments on this guidance before revisions are made... Guidance for Industry: Studies to Evaluate the Utility of Anti-Salmonella Chemical Food Additives in...

  2. 34 CFR 303.212 - Additional information and assurances.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... State is taking to ensure equitable access to, and equitable participation in, the part C statewide system as required by section 427(b) of GEPA; and (b) Other information and assurances as the Secretary may reasonably require. (Approved by Office of Management and Budget under control number...

  3. AN OVERVIEW OF WORLDWIDE CHEMICAL INFORMATION FACILITIES AND RESOURCES.

    ERIC Educational Resources Information Center

    National Science Foundation, Washington, DC.

    THIS DESCRIPTIVE OVERVIEW OF CHEMICAL INFORMATION TRANSFER ACTIVITIES AND SYSTEMS COVERS THE FULL RANGE OF INFORMATION SERVICES FROM TRADITIONAL PUBLICATION SERVICES THROUGH THE DEVELOPING COMPUTER-BASED SERVICES. THE REPORT IS CONCERNED WITH DOCUMENTATION RATHER THAN ORAL COMMUNICATION AND WITH RECOGNIZED INFORMATION SYSTEMS RATHER THAN INFORMAL…

  4. Chemical hazard information profile of triphenyl phosphite

    SciTech Connect

    Faust, R.A.; Wiedow, M.A.; Daugherty, M.W.; Ross, R.H.; Leitzke, J.S.

    1986-12-01

    The only human study located showed that triphenyl phosphite applied to the skin in a 1:3 dilution with cold cream for 48 h caused slight irritation, and challenge with the compound 14 days later produced a moderate sensitization reaction. The most significant health effects described in experimental animals are those affecting the nervous system. In adult rats, subacute exposure to the chemical produced gross ataxia and spinal cord neuropathy which predominantly affected the lateral and ventral columns of the lumber and sacral regions. Other symptoms included hyperexcitability and agitation after several days, muscle wasting, asymmetric gait, and hind-limb paralysis. All animals developed tail rigidity with a kinky appearance, and some animals displayed a circling behavior. The compound appeared to only weakly inhibit acetylcholinesterase activity. Single oral doses of triphenyl phosphite Gallus domesticus produced ataxia, and spinal cord and peripheral nerve histopathology. Neurotoxicity in rats, cats, and chickens indicated that triphenyl phosphite caused two distinct stages of action. Rats given s.c. injections of the chemical exhibit rapidly-developing stage or fine or coarse tremors which disappeared after a few hours. The later stage, occurring several days after treatment, caused hyperexcitability, spasticity and incoordination, followed by partial flaccid paralysis of the extremities. 135 refs., 2 tabs.

  5. Integrated chemical management system: A tool for managing chemical information at the Rocky Flats Environmental Technology Site

    SciTech Connect

    Costain, D.

    1995-07-01

    The Integrated Chemical Management System is a computer-based chemical information at the Rocky Flats Environmental Technology Site. Chemical containers are identified by bar code labels and information on the type, quantity and location of chemicals are tracked on individual data bases in separate buildings. Chemical inventories from multiple buildings are uploaded to a central sitewide chemical data base where reports are available from Product, Waste, and Chemical Use modules. Hazardous chemical information is provided by a separate Material Safety Data Sheet module and excess chemicals are traded between chemical owners and users with the aid of the Chemical Exchange Module.

  6. Spinel dissolution via addition of glass forming chemicals. Results of preliminary experiments

    SciTech Connect

    Fox, K. M.; Johnson, F. C.

    2015-11-01

    Increased loading of high level waste in glass can lead to crystallization within the glass. Some crystalline species, such as spinel, have no practical impact on the chemical durability of the glass, and therefore may be acceptable from both a processing and a product performance standpoint. In order to operate a melter with a controlled amount of crystallization, options must be developed for remediating an unacceptable accumulation of crystals. This report describes preliminary experiments designed to evaluate the ability to dissolve spinel crystals in simulated waste glass melts via the addition of glass forming chemicals (GFCs).

  7. 6 CFR 27.400 - Chemical-terrorism vulnerability information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 6 Domestic Security 1 2012-01-01 2012-01-01 false Chemical-terrorism vulnerability information. 27.400 Section 27.400 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY CHEMICAL... Secretary shall administer this section consistent with section 550(c) of the Homeland...

  8. 6 CFR 27.400 - Chemical-terrorism vulnerability information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 6 Domestic Security 1 2011-01-01 2011-01-01 false Chemical-terrorism vulnerability information. 27.400 Section 27.400 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY CHEMICAL... Secretary shall administer this section consistent with section 550(c) of the Homeland...

  9. UNEP Chemicals' work: breaking the barriers to information access.

    PubMed

    Keita-Ouane, Fatoumata

    2003-08-21

    The global production and trade in chemicals was measured at 1.55 trillion US dollars in 1996, four times the amount of 1966. Chemicals represent 14% of imports and exports of OECD countries and the present decade has been characterised by the expansion of the production and use of chemicals in countries with economies in transition and developing countries. While some of these chemicals are benign at the levels we are usually exposed to them, others present risks to human health or the environment often across national boundaries. Failure to safely manage these risks could lead to serious and long-term consequences. The sound management of chemicals requires adequate information about their nature and use as well as their effects and control options. Much of this information can be culled from a variety of sources but that does not guarantee equal access to it by all those who are in need. To achieve equitable information distribution, the chemical unit of the United Nations Environment Programme (UNEP) operates many activities aimed at removing the geographical and technical barriers that prevent the free flow of chemical management information. These activities include the use of assorted media and activities to enhance countries' internal capacity to search and use the information available on the Internet. PMID:12909405

  10. Systems approach to chemical spill response information needs

    SciTech Connect

    Parnarouskis, M.C.; Flessner, M.F.; Potts, R.G.

    1980-01-01

    The Chemical Hazards Response Information System (CHRIS) has been specifically designed to meet the emergency needs of US Coast Guard field personnel, currently providing them with information on 900 hazardous chemicals, with methods of predicting hazards resulting from accidental discharges, and with procedures for selecting and implementing response to accident discharges. The major components of CHRIS and the computerized hazard assessment models within the Hazard Assessment Computer System are described in detail.

  11. 78 FR 77119 - Proposed Information Collection Request; Comment Request; Regulation of Fuels and Fuel Additives...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-20

    ... AGENCY Proposed Information Collection Request; Comment Request; Regulation of Fuels and Fuel Additives: 2011 Renewable Fuel Standards-- Petition for International Aggregate Compliance Approach AGENCY... to submit an information collection request (ICR), ``Regulation of Fuels and Fuel Additives:...

  12. Use of chemical additives with steam injection to increase oil recovery. Final report

    SciTech Connect

    Handy, L.L.

    1984-09-01

    Surfactants and certain inorganic bases have been evaluated as possible chemical additives to improve performance of steamfloods. Special emphasis was given to chemicals which would reduce the residual oil saturation in regions flooded by hot water below the steam zone. Problems considered were the effect of prolonged exposure to steam temperature on the stability of petroleum sulfonates, the effect of temperature on surfactant adsorption and the effect of temperature on interfacial tensions. Methods were developed for measuring quantitatively the thermal stability of the aryl sulfonate class of surfactant. This class includes the petroleum sulfonates. The best of the surfactants evaluated in this study had marginal stability for use with steamfloods. The surfactants in combination with elevated temperatures do reduce residual oil saturations. Data are presented on the temperature effects on interfacial tensions and on adsorption. Certain inorganic chemicals which give high pH are effective and inexpensive but hydroxyl ions react with silica in the reservoir. This reaction is accentuated at higher temperatures. Data show that the pH of the injected hot water with caustic decreases with contact time. The experiments did not permit determining if an equilibrium pH would be obtained which would be high enough to be effective in recovering oil. Core floods showed that pH's in excess of 12 would be required to reduce residual oil saturations if sodium hydroxide was the injected chemical. The addition of surfactants with caustic or the use of sodium carbonate may permit recovery of oil at lower pH's. A reservoir simulator is being developed to predict performance of steamfloods with chemical additives. This has been completed for simple linear floods but is being extended to three dimensions and to more complicated flooding operations. 31 references, 43 figures, 2 tables.

  13. 78 FR 74218 - Imposition of Additional Sanctions on Syria Under the Chemical and Biological Weapons Control and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-10

    ... Imposition of Additional Sanctions on Syria Under the Chemical and Biological Weapons Control and Warfare... chemical weapons in violation of international law or lethal chemical weapons against its own nationals... the Chemical and Biological Weapons Control and Warfare Elimination Act of 1991, 22 U.S.C. 5604(a)...

  14. Effect of Organic Additive on Surface Roughness of Polycrystalline Silicon Film after Chemical Mechanical Polishing

    NASA Astrophysics Data System (ADS)

    Hwang, Hee-Sub; Park, Jin-Hyung; Yi, Sok-Ho; Paik, Ungyu; Park, Jea-Gun

    2010-01-01

    The effect of an organic additive on the surface roughness of a polycrystalline silicon (poly-Si) film was investigated by chemical mechanical polishing (CMP). The surface roughness of the polished poly-Si film was markedly reduced by adding 0.001 wt % hydroxyl ethyl cellulose (HEC) and then decreased slightly with further addition of HEC. We concluded that the reduction of surface roughness was attributed to the formation of a hydroplane layer on the poly-Si surface. Evidence of the hydroplane layer was verified by contact angle and X-ray photoelectron spectroscopy (XPS) measurements.

  15. 40 CFR Table 42 to Subpart Uuu of... - Additional Information for Initial Notification of Compliance Status

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Additional Information for Initial..., Table 42 Table 42 to Subpart UUU of Part 63—Additional Information for Initial Notification of... applies to you. For . . . You shall provide this additional information . . . 1. Identification...

  16. Construction of a Linux based chemical and biological information system.

    PubMed

    Molnár, László; Vágó, István; Fehér, András

    2003-01-01

    A chemical and biological information system with a Web-based easy-to-use interface and corresponding databases has been developed. The constructed system incorporates all chemical, numerical and textual data related to the chemical compounds, including numerical biological screen results. Users can search the database by traditional textual/numerical and/or substructure or similarity queries through the web interface. To build our chemical database management system, we utilized existing IT components such as ORACLE or Tripos SYBYL for database management and Zope application server for the web interface. We chose Linux as the main platform, however, almost every component can be used under various operating systems.

  17. Metal-contaminated soil remediation by means of paper mill sludges addition: chemical and ecotoxicological evaluation.

    PubMed

    Calace, N; Campisi, T; Iacondini, A; Leoni, M; Petronio, B M; Pietroletti, M

    2005-08-01

    Metal pollution of soils is a great environmental problem. The major risks due to metal pollution of soil consist of leaching to groundwater and potential toxicity to plants and/or animals. The objective of this study is to evaluate by means of chemical and ecotoxicological approach the effects of paper mill sludge addition on the mobile metal fraction of polluted metal soils. The study was carried out on acidic soil derived from mining activities and thus polluted with heavy metals, and on two paper mill sludges having different chemical features. The results obtained by leaching experiments showed that the addition of a paper mill sludge, consisting mainly of carbonates, silicates and organic matter, to a heavy-metal polluted soil produces a decrease of available metal forms. The carbonate content seems to play a key role in the chemical stabilisation of metals and consequently in a decrease of toxicity of soil. The leached solutions have a non-toxic effect. The mild remediation by addition of sludge has moreover a lasting effect.

  18. Effects of temperature and chemical addition on the formation of bromoorganic DBPs during ozonation.

    PubMed

    Zhang, Xiangru; Echigo, Shinya; Lei, Hongxia; Smith, Michael E; Minear, Roger A; Talley, Jeffrey W

    2005-01-01

    The effects of temperature and addition of OH radical scavengers/enhancers or HOBr scavenger on the formation of bromoorganic disinfection byproducts (DBPs) from ozonation of six raw waters were studied in true batch reactors. The formation of bromoorganic DBPs during ozonation generally increased with the increase of temperature, but might also decrease for the waters with somewhat higher values of specific UV absorbance (SUVA). The addition of hydrogen peroxide, ethanol, or ammonium dramatically decreased the formation of bromoorganic DBPs; t-butanol addition significantly increased the formation of bromoorganic DBPs; bicarbonate addition might increase or decrease bromoorganic DBP formation depending on the water source. For all the waters treated with the chemical addition, the level of total organic bromine (TOBr) varied with the same pace as that of ozone exposure (CT), which suggests that TOBr formed during ozonation may be used to estimate the CT, a measure for the achieved degree of disinfection. The results demonstrate that for each water, the correlation between TOBr and CT was less affected by the change of chemical composition of the water than that between BrO(3)(-) and CT; for a given chemical composition and temperature of a water, there generally were well-defined relationships between TOBr and CT, and bromoform and CT just as that between BrO(3)(-) and CT. The possible mechanisms behind the linear functions of TOBr or BrO(3)(-) versus CT were given. Further study is needed to examine whether the trends found in this research can be applicable for the high SUVA waters.

  19. Ice Cream Seminars for Graduate Students: Imparting Chemical Information Literacy

    ERIC Educational Resources Information Center

    Garritano, Jeremy R.

    2007-01-01

    This article provides information on a chemical information literacy program designed primarily for new graduate students. The full implementation of this program is discussed, including defining its purpose, topics covered, content presented, methods of marketing, and evaluation. The result is a series of voluntary seminars given biweekly…

  20. 77 FR 21769 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-11

    ... application for a test marketing exemption (TME), and to publish in the Federal Register periodic status... Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to... Table I. of this unit, EPA provides the following information (to the extent that such information...

  1. 6 CFR 27.400 - Chemical-terrorism vulnerability information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... record contains Chemical-terrorism Vulnerability Information controlled by 6 CFR 27.400. Do not disclose to persons without a “need to know” in accordance with 6 CFR 27.400(e). Unauthorized release may... shall be treated as classified information in accordance with 6 CFR 27.400(h) and (i). (4) Other...

  2. 6 CFR 27.400 - Chemical-terrorism vulnerability information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... record contains Chemical-terrorism Vulnerability Information controlled by 6 CFR 27.400. Do not disclose to persons without a “need to know” in accordance with 6 CFR 27.400(e). Unauthorized release may... shall be treated as classified information in accordance with 6 CFR 27.400(h) and (i). (4) Other...

  3. SYSTEM PERFORMANCE SPECIFICATION FOR A NATIONAL CHEMICAL INFORMATION SYSTEM.

    ERIC Educational Resources Information Center

    Information Management, Inc., Burlington, MA.

    THIS DOCUMENT CONTAINS A SET OF STATEMENTS ABOUT INFORMATION NEEDS, SYSTEM GOALS, SYSTEM REQUIREMENTS, AND SYSTEM SPECIFICATIONS FOR THE DEVELOPMENT OF A NATIONAL CHEMICAL INFORMATION SYSTEM. IN ITS PRESENT FORM, THE DOCUMENT CONSTITUTES A BASIS FOR FUTURE PLANNING. AS POLICY DECISIONS ARE MADE, TECHNICAL PROBLEMS SOLVED AND PLANS ARE ALTERED, THE…

  4. Exposure Levels for Chemical Threat Compounds; Information to Facilitate Chemical Incident Response

    SciTech Connect

    Hauschild, Veronique; Watson, Annetta Paule

    2013-01-01

    Exposure Standards, Limits and Guidelines for Chemical Threat Compunds ABSTRACT Exposure criteria for chemical warfare (CW) agents and certain toxic industrial chemicals (TICs) used as CW agents (such as chlorine fill in an improvised explosive device) have been developed for protection of the civilian general public, civilian employees in chemical agent processing facilities and deployed military populations. In addition, compound-specific concentrations have been developed to serve as how clean is clean enough clearance criteria guiding facility recovery following chemical terrorist or other hazardous release events. Such criteria are also useful to verify compound absence, identify containment boundaries and expedite facility recovery following chemical threat release. There is no single right value or concentration appropriate for all chemical hazard control applications. It is acknowledged that locating and comparing the many sources of CW agent and TIC exposure criteria has not been previously well-defined. This paper summarizes many of these estimates and assembles critical documentation regarding their derivation and use.

  5. [Effects of nitrogen addition on soil physico-chemical properties and enzyme activities in desertified steppe].

    PubMed

    Su, Jie-Qiong; Li, Xin-Rong; Bao, Jing-Ting

    2014-03-01

    To investigate the impacts of nitrogen (N) enrichment on soil physico-chemical property and soil enzyme activities in desert ecosystems, a field experiment by adding N at 0, 1.75, 3.5, 7, or 14 g N x m(-2) a(-1) was conducted in a temperate desert steppe in the southeastern fringe of the Tengger Desert. The results showed that N addition led to accumulations of total N, NO(3-)-N, NH(4+)-N, and available N in the upper soil (0-10 cm) and subsoil (10-20 cm), however, reductions in soil pH were observed, causing soil acidification to some extent. N addition pronouncedly inhibited soil enzyme activities, which were different among N addition levels, soil depths, and years, respectively. Soil enzyme activities were significantly correlated with the soil N level, soil pH, and soil moisture content, respectively.

  6. Chemical patterning on preformed porous silicon photonic crystals: towards multiplex detection of protease activity at precise positions† †Electronic supplementary information (ESI) available: SEM images, XPS result and more optical reflectivity data. See DOI: 10.1039/c4tb00281d Click here for additional data file.

    PubMed Central

    Zhu, Ying; Soeriyadi, Alexander H.; Parker, Stephen G.; Reece, Peter J.

    2014-01-01

    Porous silicon (PSi) rugate filters modified with alkyne-terminated monolayers were chemically patterned using a combination of photolithography of photoresist and click chemistry. Two chemical functionalities were obtained by conjugating, via click reactions, ethylene glycol moieties containing two different terminal groups to discrete areas towards the exterior of a PSi rugate filter. The patterning of biological species to the functionalized surface was demonstrated through the conjugation of fluorescein isothiocyanate labelled bovine serum albumin (FITC-BSA). Fluorescence microscopy showed selective positioning of FITC-BSA at discretely functionalized areas. Meanwhile, the optical information from precisely defined positions on the patterned surface was monitored by optical reflectivity measurements. The optical measurements revealed successful step-wise chemical functionalization followed by immobilization of gelatin. Multiplex detection of protease activity from different array elements on the patterned surface was demonstrated by monitoring the blue shifts in the reflectivity spectra resulted from the digestion of gelatin by subtilisin. Precise information from both individual elements and average population was acquired. This technique is important for the development of PSi into a microarray platform for highly parallel biosensing applications, especially for cell-based assays. PMID:24910774

  7. Sources of toxicity and exposure information for identifying chemicals of high concern to children

    SciTech Connect

    Stone, Alex; Delistraty, Damon

    2010-11-15

    Due to the large number of chemicals in commerce without adequate toxicity characterization data, coupled with an ineffective federal policy for chemical management in the United States, many states are grappling with the challenge to identify toxic chemicals that may pose a risk to human health and the environment. Specific populations (e.g., children, elderly) are particularly sensitive to these toxic chemicals. In 2008, the Children's Safe Product Act (CSPA) was passed in Washington State. The CSPA included specific requirements to identify High Priority Chemicals (HPCs) and Chemicals of High Concern to Children (CHCCs). To implement this legislation, a methodology was developed to identify HPCs from authoritative scientific and regulatory sources on the basis of toxicity criteria. Another set of chemicals of concern was then identified from authoritative sources, based on their potential exposure to children. Exposure potential was evaluated by identifying chemicals detected in biomonitoring studies (i.e., human tissues), as well as those present in residential exposure media (e.g., indoor air, house dust, drinking water, consumer products). Accordingly, CHCCs were defined as HPCs that also appear in biomonitoring studies or relevant exposure media. For chemicals with unique Chemical Abstracts Service (CAS) numbers, we identified 2044 HPCs and 2219 chemicals with potential exposure to children, resulting in 476 CHCCs. The process of chemical identification is dynamic, so that chemicals may be added or subtracted as new information becomes available. Although beyond the scope of this paper, the 476 CHCCs will be prioritized in a more detailed assessment, based on the strength and weight of evidence of toxicity and exposure data. Our approach was developed to be flexible which allows the addition or removal of specific sources of toxicity or exposure information, as well as transparent to allow clear identification of inputs. Although the methodology was

  8. 77 FR 74685 - Chemical Facility Anti-Terrorism Standards (CFATS) Chemical-Terrorism Vulnerability Information...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-17

    ... information provided. Special Instructions: Comments that include trade secrets, confidential commercial or.... Comments containing trade secrets, confidential commercial or financial information, CVI, SSI, or PCII... security of high-risk chemical facilities. On April 9, 2007, the Department issued an Interim Final...

  9. Treatment of a dilute waste oil emulsion by chemical addition (CA)-dissolved air flotation (DAF)

    SciTech Connect

    Reed, B.E.; Carriere, P.; Zhu, X.; Lorkowski, T.

    1995-12-31

    Treatment of wastewater from aluminum rolling mill operations is an inherent problem in the aluminum fabrication industry. In this study, wastewater from the manufacturer`s processes was transferred to two holding ponds having a total capacity of about 5 million gallons and a detention time of about 10 days. In the holding ponds, free oil was allowed to rise to the surface where it was periodically removed. Wastewater from the holding ponds was withdrawn from about a depth of 9 ft. and used as influent to a variety of technologies. In this paper, results from the chemical addition (CA)-dissolved air flotation (DAF) portion of the treatability study are presented.

  10. 16 CFR 2.20 - Petitions for review of requests for additional information or documentary material.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... or documentary material issued under 16 CFR 803.20. (b) Second request procedures—(1) Notice. Every request for additional information or documentary material issued under 16 CFR 803.20 shall inform the... additional information or documentary material. 2.20 Section 2.20 Commercial Practices FEDERAL...

  11. The origin and dynamic evolution of chemical information transfer.

    PubMed

    Steiger, Sandra; Schmitt, Thomas; Schaefer, H Martin

    2011-04-01

    Although chemical communication is the most widespread form of communication, its evolution and diversity are not well understood. By integrating studies of a wide range of terrestrial plants and animals, we show that many chemicals are emitted, which can unintentionally provide information (cues) and, therefore, act as direct precursors for the evolution of intentional communication (signals). Depending on the content, design and the original function of the cue, there are predictable ways that selection can enhance the communicative function of chemicals. We review recent progress on how efficacy-based selection by receivers leads to distinct evolutionary trajectories of chemical communication. Because the original function of a cue may channel but also constrain the evolution of functional communication, we show that a broad perspective on multiple selective pressures acting upon chemicals provides important insights into the origin and dynamic evolution of chemical information transfer. Finally, we argue that integrating chemical ecology into communication theory may significantly enhance our understanding of the evolution, the design and the content of signals in general.

  12. Nutrients removal and recovery from anaerobically digested swine wastewater by struvite crystallization without chemical additions.

    PubMed

    Song, Yong-Hui; Qiu, Guang-Lei; Yuan, Peng; Cui, Xiao-Yu; Peng, Jian-Feng; Zeng, Ping; Duan, Liang; Xiang, Lian-Cheng; Qian, Feng

    2011-06-15

    Anaerobically digested swine wastewater contains high concentrations of phosphorus (P) and nitrogen (N). A pilot-scale experiment was carried out for nutrients removal and recovery from anaerobically digested swine wastewater by struvite crystallization. In the pilot plant, a sequencing batch reactor (SBR) and a continuous-flow reactor with struvite accumulation devices were designed and employed. The wastewater pH value was increased by CO(2) stripping, and the struvite crystallization process was performed without alkali and Mg(2+) additions. Results of the long-term operation of the system showed that, both reactors provided up to 85% P removal and recovery over wide ranges of aeration times (1.0-4.0 h), hydraulic retention times (HRT) (6.0-15.0 h) and temperatures (0-29.5°C) for an extended period of 247 d, in which approximate 30% of P was recovered by the struvite accumulation devices. However, 40-90% of NH(4)(+)-N removed was through air stripping instead of being immobilized in the recovered solids. The recovered products were detected and analyzed by scanning electron microscope (SEM), X-ray diffraction (XRD) and chemical methods, which were proved to be struvite with purity of more than 90%. This work demonstrated the feasibility and effects of nutrients removal and recovery from anaerobically digested swine wastewater by struvite crystallization without chemical additions.

  13. Evaluation of alternative chemical additives for high-level waste vitrification feed preparation processing

    SciTech Connect

    Seymour, R.G.

    1995-06-07

    During the development of the feed processing flowsheet for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS), research had shown that use of formic acid (HCOOH) could accomplish several processing objectives with one chemical addition. These objectives included the decomposition of tetraphenylborate, chemical reduction of mercury, production of acceptable rheological properties in the feed slurry, and controlling the oxidation state of the glass melt pool. However, the DEPF research had not shown that some vitrification slurry feeds had a tendency to evolve hydrogen (H{sub 2}) and ammonia (NH{sub 3}) as the result of catalytic decomposition of CHOOH with noble metals (rhodium, ruthenium, palladium) in the feed. Testing conducted at Pacific Northwest Laboratory and later at the Savannah River Technical Center showed that the H{sub 2} and NH{sub 3} could evolve at appreciable rates and quantities. The explosive nature of H{sub 2} and NH{sub 3} (as ammonium nitrate) warranted significant mitigation control and redesign of both facilities. At the time the explosive gas evolution was discovered, the DWPF was already under construction and an immediate hardware fix in tandem with flowsheet changes was necessary. However, the Hanford Waste Vitrification Plant (HWVP) was in the design phase and could afford to take time to investigate flowsheet manipulations that could solve the problem, rather than a hardware fix. Thus, the HWVP began to investigate alternatives to using HCOOH in the vitrification process. This document describes the selection, evaluation criteria, and strategy used to evaluate the performance of the alternative chemical additives to CHOOH. The status of the evaluation is also discussed.

  14. Characterization of peptides in ensiled alfalfa treated with different chemical additives.

    PubMed

    Ding, Wurong; Guo, Xusheng; Ataku, Kazuo

    2013-12-01

    Effects of different chemical additives on peptide composition in ensiled alfalfa (Medicago sativa L.) were investigated by using gel filtration and determination of N characteristics. The alfalfa silages were prepared untreated (control) or with formic acid, formaldehyde or tannic acid as additives at ensiling. All additives reduced non-protein N (NPN), ammonia nitrogen (NH3 -N) and amino acid N (AA-N) in the ensiled forage, and the most effective reduction of NPN and AA-N was observed in the formaldehyde-treated silages. Peptides in the control silage were mainly dipeptides to peptides with five amino acid residues. Most peptides in the formic acid-treated silage contained 4-12 amino acid residues. Although most peptides in the formaldehyde-treated silages contained 4-6 amino acid residues, there was a considerable proportion of peptides with 7-11 amino acid residues. Tannic acid had little effect on peptide size of ensiled alfalfa extract in which most peptides contained 5-6 amino acid residues. Peptide size in formic acid-treated alfalfa silage was greater than that in the other treatments. Addition of formic acid and formaldehyde not only increased the peptide concentration in alfalfa silage, but enlarged the peptide size.

  15. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Confidentiality of data and information in color... and information in color additive petitions. (a) The following data and information in a color... because of the deficiencies involved: (1) All safety and functionality data and information submitted...

  16. 42 CFR 435.955 - Additional requirements regarding information released by a Federal agency.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Additional requirements regarding information... requirements regarding information released by a Federal agency. (a) Unless waived under paragraph (d) of this section, based on information received from a computerized data match in which information on...

  17. On the evolving open peer review culture for chemical information science.

    PubMed

    Walters, W Patrick; Bajorath, Jürgen

    2015-01-01

    Compared to the traditional anonymous peer review process, open post-publication peer review provides additional opportunities -and challenges- for reviewers to judge scientific studies. In this editorial, we comment on the open peer review culture and provide some guidance for reviewers of manuscripts submitted to the Chemical Information Science channel of F1000Research.

  18. On the evolving open peer review culture for chemical information science

    PubMed Central

    Walters, W. Patrick; Bajorath, Jürgen

    2015-01-01

    Compared to the traditional anonymous peer review process, open post-publication peer review provides additional opportunities -and challenges- for reviewers to judge scientific studies. In this editorial, we comment on the open peer review culture and provide some guidance for reviewers of manuscripts submitted to the Chemical Information Science channel of F1000Research. PMID:26913193

  19. On the evolving open peer review culture for chemical information science.

    PubMed

    Walters, W Patrick; Bajorath, Jürgen

    2015-01-01

    Compared to the traditional anonymous peer review process, open post-publication peer review provides additional opportunities -and challenges- for reviewers to judge scientific studies. In this editorial, we comment on the open peer review culture and provide some guidance for reviewers of manuscripts submitted to the Chemical Information Science channel of F1000Research. PMID:26913193

  20. Communication and re-use of chemical information in bioscience

    PubMed Central

    Murray-Rust, Peter; Mitchell, John BO; Rzepa, Henry S

    2005-01-01

    The current methods of publishing chemical information in bioscience articles are analysed. Using 3 papers as use-cases, it is shown that conventional methods using human procedures, including cut-and-paste are time-consuming and introduce errors. The meaning of chemical terms and the identity of compounds is often ambiguous. valuable experimental data such as spectra and computational results are almost always omitted. We describe an Open XML architecture at proof-of-concept which addresses these concerns. Compounds are identified through explicit connection tables or links to persistent Open resources such as PubChem. It is argued that if publishers adopt these tools and protocols, then the quality and quantity of chemical information available to bioscientists will increase and the authors, publishers and readers will find the process cost-effective. PMID:16026614

  1. Introducing Chemistry Undergraduate Students to Online Chemical Information Retrieval.

    ERIC Educational Resources Information Center

    Wolman, Yecheskel

    1985-01-01

    The results of manual and online searching are compared during a unit on online chemical information retrieval taught at Hebrew University. Strategies and results obtained are provided for student searches on the synthesis of vitamin K(3) from 2-methylnaphthalene and polywater. (JN)

  2. Recent Strategies for Retrieving Chemical Structure Information on the Web.

    ERIC Educational Resources Information Center

    Lo, Mei Ling

    1997-01-01

    Various methods for retrieving chemical structure information on the World Wide Web are discussed. Although graphical plug-in programs provide more search capabilities, users first have to obtain a copy of the programs. Tripos's WebSketch and ACD Interactive Lab adopt a different approach; using JAVA applets, users create and display a structure…

  3. Chemical Information in Scirus and BASE (Bielefeld Academic Search Engine)

    ERIC Educational Resources Information Center

    Bendig, Regina B.

    2009-01-01

    The author sought to determine to what extent the two search engines, Scirus and BASE (Bielefeld Academic Search Engines), would be useful to first-year university students as the first point of searching for chemical information. Five topics were searched and the first ten records of each search result were evaluated with regard to the type of…

  4. Informing Workers of Chemical Hazards: The OSHA Hazard Communication Standard.

    ERIC Educational Resources Information Center

    American Chemical Society, Washington, DC.

    Practical information on how to implement a chemical-related safety program is outlined in this publication. Highlights of the federal Occupational Safety and Health Administrations (OSHA) Hazard Communication Standard are presented and explained. These include: (1) hazard communication requirements (consisting of warning labels, material safety…

  5. Support from Afar: Using Chemical Safety Information on the Internet.

    ERIC Educational Resources Information Center

    Stuart, Ralph

    One of the major challenges facing people committed to Teaching Safety in High Schools, Colleges, and Universities is keeping up with both the wide range of relevant technical information about potential hazards (ranging from fire protection to chemical hazards to biological issues) and the ever-changing world of safety regulations and standards.…

  6. 6 CFR 27.400 - Chemical-terrorism vulnerability information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... inspection or audits under § 27.250; (6) Any records required to be created or retained under § 27.255; (7... record contains Chemical-terrorism Vulnerability Information controlled by 6 CFR 27.400. Do not disclose to persons without a “need to know” in accordance with 6 CFR 27.400(e). Unauthorized release...

  7. An Application of Interactive Computing - A Chemical Information System

    ERIC Educational Resources Information Center

    Feldmann, Richard J.; And Others

    1972-01-01

    A collection of computer programs to do chemical information retrieval are described in terms of the interactions between the computer and the chemist. In interacting with the computer, the chemist can graphically specify two-dimensional structures as queries and view structures as search results. (18 references) (Author/NH)

  8. Influence of physico-chemical factors on leaching of chemical additives from aluminium foils used for packaging of food materials.

    PubMed

    Ojha, Priyanka; Ojha, C S; Sharma, V P

    2007-01-01

    In recent years, the use of aluminium foils to wrap foodstuff and commodities has been increased to a great extent. Aluminium was found to leach out from the foil in different simulants particularly in distilled water, acidic and alkaline medium at 60 +/- 2 degrees C for 2 hours and 40 +/- 2 degrees C for 24 hours. The migration was found to be above the permissible limit as laid down by WHO guidelines, that is of 0.2 mg/L of water. The protocol used for this study was based on the recommendation of Bureau of Indian Standard regarding the migration of chemical additives from packaging materials used to pack food items. Migration of the aluminium metal was found significantly higher in acidic and aqueous medium in comparison to alcoholic and saline medium. Higher temperature conditions also enhanced the rate of migration of aluminium in acidic and aqueous medium. Leaching of aluminium metal occurred in double distilled water, acetic acid 3%, normal saline and sodium carbonate, except ethanol 8%, in which aluminium migration was below the detection limit of the instrument where three brands of the aluminium foil samples studied.

  9. Effect of GdL Addition on Physico-chemical Properties of Fermented Sausages during Ripening

    PubMed Central

    Yim, Dong-Gyun

    2015-01-01

    This study investigated the effects of glucono-δ-lactone (GdL) addition on physicochemical and microbiological characteristics of fermented sausages during ripening and drying. Five batches of sausages were produced under ripening conditions: without GdL and with 0, 0.1, 0.25, 0.5 and 0.75% of GdL addition. Samples from each treatment were taken for physicochemical and microbiological analyses on the 0, 1, 3, 5, 7, 10, 15, 20 and 25th day of ripening. Chemical analysis showed a significant decrease in moisture content of sausages with increasing amounts of GdL added (p<0.05). The moisture contents decreased, whereas the fat, protein and ash contents increased throughout ripening (p<0.05). Increasing levels of GdL caused a decrease in the pH values (p<0.05), which can have an inhibitory effect against microflora. Water holding capacity content of samples decreased with increasing GdL concentration (p<0.05). The shear force values of fermented sausages showed the highest in T4 (p<0.05). During ripening, the shear force values of sausages were increased on the 25th day compared to day 0 (p<0.05). The higher GdL level produced lighter and more yellow sausages. The addition of 0.75% GdL was effective in controlling bacteria counts. Addition of GdL in sausages resulted in the physicochemical and microbiological attributes equal to or better than no addition of GdL without any harmful effect. PMID:26761846

  10. Effect of additives on the properties of polyaniline nanofibers prepared by high gravity chemical oxidative polymerization.

    PubMed

    Zhao, Yibo; Arowo, Moses; Wu, Wei; Chen, Jianfeng

    2015-05-12

    Polyaniline (PANI) nanofibers with improved properties were prepared by high gravity chemical oxidative polymerization in a rotating packed bed with the assistance of p-aminodiphenylamine (AD) and p-phenylenediamine (AP). The effects of reactor type, additive dosage, reaction temperature, and high-gravity level on the properties of products were investigated in detail. Three conclusions were made: (1) a small amount of additive can significantly improve some properties of the nanofibers such as uniformity, specific surface area, and specific capacitance; (2) in order to obtain high-quality nanofibers, the high-gravity level should coordinate with the reaction rate; (3) the molecular weight and conductivity of PANI decrease with the increase of additive dosage. The products have larger specific surface areas of up to 73.9 and 68.4 m(2)/g and consequently improved specific capacitance of up to 527.5 and 552 F/g for the PANI nanofibers prepared with AD and AP, respectively. However, the specific surface area and specific capacitance of pure PANI are only 49.1 m(2)/g and 333.3 F/g, respectively. This research provides a simple, reliable, and scalable method to produce PANI nanofibers of high performances.

  11. 49 CFR 260.25 - Additional information for Applicants not having a credit rating.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Additional information for Applicants not having a... Financial Assistance § 260.25 Additional information for Applicants not having a credit rating. Each application submitted by Applicants not having a recent credit rating from one or more nationally...

  12. Can metabolomics in addition to genomics add to prognostic and predictive information in breast cancer?

    PubMed

    Howell, Anthony

    2010-11-16

    Genomic data from breast cancers provide additional prognostic and predictive information that is beginning to be used for patient management. The question arises whether additional information derived from other 'omic' approaches such as metabolomics can provide additional information. In an article published this month in BMC Cancer, Borgan et al. add metabolomic information to genomic measures in breast tumours and demonstrate, for the first time, that it may be possible to further define subgroups of patients which could be of value clinically. See research article: http://www.biomedcentral.com/1471-2407/10/628.

  13. 77 FR 59891 - Proposed Information Collection; Comment Request; Chemical Weapons Convention Declaration and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ... Bureau of Industry and Security Proposed Information Collection; Comment Request; Chemical Weapons...@bis.doc.gov . SUPPLEMENTARY INFORMATION: ] I. Abstract The Chemical Weapons Convention Implementation Act of 1998 and Commerce Chemical Weapons Convention Regulations (CWCR) specify the...

  14. Discovering More Chemical Concepts from 3D Chemical Information Searches of Crystal Structure Databases

    ERIC Educational Resources Information Center

    Rzepa, Henry S.

    2016-01-01

    Three new examples are presented illustrating three-dimensional chemical information searches of the Cambridge structure database (CSD) from which basic core concepts in organic and inorganic chemistry emerge. These include connecting the regiochemistry of aromatic electrophilic substitution with the geometrical properties of hydrogen bonding…

  15. Teaching Chemical Information in a Liberal Arts Curriculum

    NASA Astrophysics Data System (ADS)

    Ricker, Alison Scott; Thompson, Robert Q.

    1999-11-01

    We first offered Chemical Information as a one-credit, semester-long course in 1993 and have continued to team-teach it each fall. We offer this summary of our course as a model that might be adapted in other settings, acknowledging that no single course can adequately prepare chemists for the many challenges involved in finding, evaluating, and utilizing chemical information. The focus on information retrieval, evaluation, and presentation in a separate course has worked well for us, successfully integrating concepts of information literacy in a chemical context. We cover a wide array of topics, beginning with print and electronic resources on our campus and moving quickly to databases and other sources on the Internet. Searching CA Online via STN Express and STN Easy is emphasized more than any other single source. We have described the course in some detail elsewhere and give here a synopsis of our current approach and significant changes in the course over the last two years.

  16. Effect of chemical additives on Bacillus thuringiensis (Bacillales: Bacillaceae) against Plutella xylostella (Lepidoptera: Pyralidae).

    PubMed

    Zhang, L; Qiu, S; Huang, T; Huang, Z; Xu, L; Wu, C; Gelbic, I; Guan, X

    2013-06-01

    To examine the effect of chemical additives on Bacillus thuringiensis (Berliner) against Plutella xylostella (L.), inorganic salts, nitrogenous compounds, protein solubilizing agents, and organic acids were selected and tested. The chosen materials are low in cost and environmentally safe. Results show that many inorganic salts can increase the activity of B. thuringiensis in a range of 1.31- to 3.08-fold. These include calcium acetate, calcium chloride, calcium hydroxide, calcium sulfate, calcium carbonate, sodium carbonate, sodium acetate, potassium hydroxide, potassium carbonate, potassium acetate, magnesium chloride, magnesium sulfate, and zinc sulfate. Nitrogenous compounds, including peptone, sodium nitrate, and ammonium nitrate, can enhance the activity of B. thuringiensis 1.62-, 1.32-, and 1.37-fold, respectively. Among the protein solubilizing agents, EDTA, urea, mercaptoethanol and dipotassium hydrogen phosphate increased the activity of B. thuringiensis 1.62- to 2.34-fold. Among the organic acids, maleic and citric acids boosted the activity 1.45- and 1.55-fold, respectively. Meanwhile, sodium benzoate and resorcinol led to 1.74- and 1.44-fold activity gains, respectively. Use of appropriate additives could provide great benefit not only in reducing the costs for field applications of biological insecticides but also by boosting the efficacy of B. thuringiensis. PMID:23865169

  17. Toxicogenomics concepts and applications to study hepatic effects of food additives and chemicals

    SciTech Connect

    Stierum, Rob . E-mail: stierum@voeding.tno.nl; Heijne, Wilbert; Kienhuis, Anne; Ommen, Ben van; Groten, John

    2005-09-01

    Transcriptomics, proteomics and metabolomics are genomics technologies with great potential in toxicological sciences. Toxicogenomics involves the integration of conventional toxicological examinations with gene, protein or metabolite expression profiles. An overview together with selected examples of the possibilities of genomics in toxicology is given. The expectations raised by toxicogenomics are earlier and more sensitive detection of toxicity. Furthermore, toxicogenomics will provide a better understanding of the mechanism of toxicity and may facilitate the prediction of toxicity of unknown compounds. Mechanism-based markers of toxicity can be discovered and improved interspecies and in vitro-in vivo extrapolations will drive model developments in toxicology. Toxicological assessment of chemical mixtures will benefit from the new molecular biological tools. In our laboratory, toxicogenomics is predominantly applied for elucidation of mechanisms of action and discovery of novel pathway-supported mechanism-based markers of liver toxicity. In addition, we aim to integrate transcriptome, proteome and metabolome data, supported by bioinformatics to develop a systems biology approach for toxicology. Transcriptomics and proteomics studies on bromobenzene-mediated hepatotoxicity in the rat are discussed. Finally, an example is shown in which gene expression profiling together with conventional biochemistry led to the discovery of novel markers for the hepatic effects of the food additives butylated hydroxytoluene, curcumin, propyl gallate and thiabendazole.

  18. 75 FR 77645 - Agency Information Collection Activities; Proposed Collection; Comment Request; Color Additive...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-13

    ... Collection; Comment Request; Color Additive Certification Requests and Recordkeeping AGENCY: Food and Drug... certification of color additives manufactured for use in foods, drugs, cosmetics or medical devices in the... of information technology. Color Additive Certification Requests and Recordkeeping--21 CFR Part...

  19. The chemical information ontology: provenance and disambiguation for chemical data on the biological semantic web.

    PubMed

    Hastings, Janna; Chepelev, Leonid; Willighagen, Egon; Adams, Nico; Steinbeck, Christoph; Dumontier, Michel

    2011-01-01

    Cheminformatics is the application of informatics techniques to solve chemical problems in silico. There are many areas in biology where cheminformatics plays an important role in computational research, including metabolism, proteomics, and systems biology. One critical aspect in the application of cheminformatics in these fields is the accurate exchange of data, which is increasingly accomplished through the use of ontologies. Ontologies are formal representations of objects and their properties using a logic-based ontology language. Many such ontologies are currently being developed to represent objects across all the domains of science. Ontologies enable the definition, classification, and support for querying objects in a particular domain, enabling intelligent computer applications to be built which support the work of scientists both within the domain of interest and across interrelated neighbouring domains. Modern chemical research relies on computational techniques to filter and organise data to maximise research productivity. The objects which are manipulated in these algorithms and procedures, as well as the algorithms and procedures themselves, enjoy a kind of virtual life within computers. We will call these information entities. Here, we describe our work in developing an ontology of chemical information entities, with a primary focus on data-driven research and the integration of calculated properties (descriptors) of chemical entities within a semantic web context. Our ontology distinguishes algorithmic, or procedural information from declarative, or factual information, and renders of particular importance the annotation of provenance to calculated data. The Chemical Information Ontology is being developed as an open collaborative project. More details, together with a downloadable OWL file, are available at http://code.google.com/p/semanticchemistry/ (license: CC-BY-SA).

  20. Late Chondritic Additions and Planet and Planetesimal Growth: Evaluation of Physical and Chemical Mechanisms

    NASA Technical Reports Server (NTRS)

    Righter, Kevin

    2013-01-01

    Studies of terrestrial peridotite and martian and achondritic meteorites have led to the conclusion that addition of chondritic material to growing planets or planetesimals, after core formation, occurred on Earth, Mars, asteroid 4 Vesta, and the parent body of the angritic meteorites [1-4]. One study even proposed that this was a common process in the final stages of growth [5]. These conclusions are based almost entirely on the highly siderophile elements (HSE; Re, Au, Pt, Pd, Rh, Ru, Ir, Os). The HSE are a group of eight elements that have been used to argue for late accretion of chondritic material to the Earth after core formation was complete (e.g., [6]). This idea was originally proposed because the D(metal/silicate) values for the HSE are so high, yet their concentration in the mantle is too high to be consistent with such high Ds. The HSE also are present in chondritic relative abundances and hence require similar Ds if this is the result of core-mantle equilibration. Since the work of [6] there has been a realization that core formation at high PT conditions can explain the abundances of many siderophile elements in the mantle (e.g., [7]), but such detailed high PT partitioning data are lacking for many of the HSE to evaluate whether such ideas are viable for all four bodies. Consideration of other chemical parameters reveals larger problems that are difficult to overcome, but must be addressed in any scenario which calls on the addition of chondritic material to a reduced mantle. Yet these problems are rarely discussed or emphasized, making the late chondritic (or late veneer) addition hypothesis suspect.

  1. Automated Physico-Chemical Cell Model Development through Information Theory

    SciTech Connect

    Peter J. Ortoleva

    2005-11-29

    The objective of this project was to develop predictive models of the chemical responses of microbial cells to variations in their surroundings. The application of these models is optimization of environmental remediation and energy-producing biotechnical processes.The principles on which our project is based are as follows: chemical thermodynamics and kinetics; automation of calibration through information theory; integration of multiplex data (e.g. cDNA microarrays, NMR, proteomics), cell modeling, and bifurcation theory to overcome cellular complexity; and the use of multiplex data and information theory to calibrate and run an incomplete model. In this report we review four papers summarizing key findings and a web-enabled, multiple module workflow we have implemented that consists of a set of interoperable systems biology computational modules.

  2. LIFE Chamber Chemical Equilibrium Simulations with Additive Hydrogen, Oxygen, and Nitrogen

    SciTech Connect

    DeMuth, J A; Simon, A J

    2009-09-03

    In order to enable continuous operation of a Laser Inertial confinement Fusion Energy (LIFE) engine, the material (fill-gas and debris) in the fusion chamber must be carefully managed. The chamber chemical equilibrium compositions for post-shot mixtures are evaluated to determine what compounds will be formed at temperatures 300-5000K. It is desired to know if carbon and or lead will deposit on the walls of the chamber, and if so: at what temperature, and what elements can be added to prevent this from happening. The simulation was conducted using the chemical equilibrium solver Cantera with a Matlab front-end. Solutions were obtained by running equilibrations at constant temperature and constant specific volume over the specified range of temperatures. It was found that if nothing is done, carbon will deposit on the walls once it cools to below 2138K, and lead below 838K. Three solutions to capture the carbon were found: adding pure oxygen, hydrogen/nitrogen combo, and adding pure nitrogen. The best of these was the addition of oxygen which would readily form CO at around 4000K. To determine the temperature at which carbon would deposit on the walls, temperature solutions to evaporation rate equations needed to be found. To determine how much carbon or any species was in the chamber at a given time, chamber flushing equations needed to be developed. Major concerns are deposition of carbon and/or oxygen on the tungsten walls forming tungsten oxides or tungsten carbide which could cause embrittlement and cause failure of the first wall. Further research is needed.

  3. Testing for Additivity in Chemical Mixtures Using a Fixed-Ratio Ray Design and Statistical Equivalence Testing Methods

    EPA Science Inventory

    Fixed-ratio ray designs have been used for detecting and characterizing interactions of large numbers of chemicals in combination. Single chemical dose-response data are used to predict an “additivity curve” along an environmentally relevant ray. A “mixture curve” is estimated fr...

  4. Chemical and Sensory Quality Preservation in Coated Almonds with the Addition of Antioxidants.

    PubMed

    Larrauri, Mariana; Demaría, María Gimena; Ryan, Liliana C; Asensio, Claudia M; Grosso, Nelson R; Nepote, Valeria

    2016-01-01

    Almonds provide many benefits such as preventing heart disease due to their high content of oleic fatty acid-rich oil and other important nutrients. However, they are susceptible to oxidation reactions causing rancidity during storage. The objective of this work was to evaluate the chemical and sensory quality preservation of almonds coated with carboxymethyl cellulose and with the addition of natural and synthetic antioxidants during storage. Four samples were prepared: almonds without coating (C), almonds coated with carboxymethyl cellulose (CMC), almonds coated with CMC supplemented with peanut skins extract (E), and almonds coated with CMC and supplemented with butylhydroxytoluene (BHT). Proximate composition and fatty acid profile were determined on raw almonds. Almond samples (C, CMC, E and BHT) were stored at 40 °C for 126 d. Lipid oxidation indicators: peroxide value (PV), conjugated dienes (CD), volatile compounds (hexanal and nonanal), and sensory attributes were determined for the stored samples. Samples showed small but significant increases in PV, CD, hexanal and nonanal contents, and intensity ratings of negative sensory attributes (oxidized and cardboard). C had the highest tendency to deterioration during storage. At the end of storage (126 d), C had the highest PV (3.90 meqO2 /kg), and BHT had the lowest PV (2.00 meqO2 /kg). CMC and E samples had similar intermediate PV values (2.69 and 2.57 meqO2 /kg, respectively). CMC coating and the addition of natural (peanut skin extract) and synthetic (BHT) antioxidants provide protection to the roasted almond product.

  5. Chemical and Sensory Quality Preservation in Coated Almonds with the Addition of Antioxidants.

    PubMed

    Larrauri, Mariana; Demaría, María Gimena; Ryan, Liliana C; Asensio, Claudia M; Grosso, Nelson R; Nepote, Valeria

    2016-01-01

    Almonds provide many benefits such as preventing heart disease due to their high content of oleic fatty acid-rich oil and other important nutrients. However, they are susceptible to oxidation reactions causing rancidity during storage. The objective of this work was to evaluate the chemical and sensory quality preservation of almonds coated with carboxymethyl cellulose and with the addition of natural and synthetic antioxidants during storage. Four samples were prepared: almonds without coating (C), almonds coated with carboxymethyl cellulose (CMC), almonds coated with CMC supplemented with peanut skins extract (E), and almonds coated with CMC and supplemented with butylhydroxytoluene (BHT). Proximate composition and fatty acid profile were determined on raw almonds. Almond samples (C, CMC, E and BHT) were stored at 40 °C for 126 d. Lipid oxidation indicators: peroxide value (PV), conjugated dienes (CD), volatile compounds (hexanal and nonanal), and sensory attributes were determined for the stored samples. Samples showed small but significant increases in PV, CD, hexanal and nonanal contents, and intensity ratings of negative sensory attributes (oxidized and cardboard). C had the highest tendency to deterioration during storage. At the end of storage (126 d), C had the highest PV (3.90 meqO2 /kg), and BHT had the lowest PV (2.00 meqO2 /kg). CMC and E samples had similar intermediate PV values (2.69 and 2.57 meqO2 /kg, respectively). CMC coating and the addition of natural (peanut skin extract) and synthetic (BHT) antioxidants provide protection to the roasted almond product. PMID:26595771

  6. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must...

  7. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must...

  8. Chemical information matters: an e-Research perspective on information and data sharing in the chemical sciences.

    PubMed

    Bird, Colin L; Frey, Jeremy G

    2013-08-21

    Recently, a number of organisations have called for open access to scientific information and especially to the data obtained from publicly funded research, among which the Royal Society report and the European Commission press release are particularly notable. It has long been accepted that building research on the foundations laid by other scientists is both effective and efficient. Regrettably, some disciplines, chemistry being one, have been slow to recognise the value of sharing and have thus been reluctant to curate their data and information in preparation for exchanging it. The very significant increases in both the volume and the complexity of the datasets produced has encouraged the expansion of e-Research, and stimulated the development of methodologies for managing, organising, and analysing "big data". We review the evolution of cheminformatics, the amalgam of chemistry, computer science, and information technology, and assess the wider e-Science and e-Research perspective. Chemical information does matter, as do matters of communicating data and collaborating with data. For chemistry, unique identifiers, structure representations, and property descriptors are essential to the activities of sharing and exchange. Open science entails the sharing of more than mere facts: for example, the publication of negative outcomes can facilitate better understanding of which synthetic routes to choose, an aspiration of the Dial-a-Molecule Grand Challenge. The protagonists of open notebook science go even further and exchange their thoughts and plans. We consider the concepts of preservation, curation, provenance, discovery, and access in the context of the research lifecycle, and then focus on the role of metadata, particularly the ontologies on which the emerging chemical Semantic Web will depend. Among our conclusions, we present our choice of the "grand challenges" for the preservation and sharing of chemical information.

  9. 18 CFR 33.4 - Additional information requirements for applications involving vertical competitive impacts.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Additional information requirements for applications involving vertical competitive impacts. 33.4 Section 33.4 Conservation of Power... FEDERAL POWER ACT APPLICATIONS UNDER FEDERAL POWER ACT SECTION 203 § 33.4 Additional...

  10. 18 CFR 33.4 - Additional information requirements for applications involving vertical competitive impacts.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information requirements for applications involving vertical competitive impacts. 33.4 Section 33.4 Conservation of Power... FEDERAL POWER ACT APPLICATIONS UNDER FEDERAL POWER ACT SECTION 203 § 33.4 Additional...

  11. A Four-Step and Four-Criteria Approach for Evaluating Evidence of Dose Addition in Chemical Mixture Toxicity

    EPA Science Inventory

    Dose addition is the most frequently-used component-based approach for predicting dose response for a mixture of toxicologically-similar chemicals and for statistical evaluation of whether the mixture response is consistent with dose additivity and therefore predictable from the ...

  12. Chemical and Physical Reactions of Wellbore Cement under CO2 Storage Conditions: Effects of Cement Additives

    NASA Astrophysics Data System (ADS)

    Kutchko, B. G.; Strazisar, B. R.; Huerta, N.; Lowry, G. V.; Dzombak, D. A.; Thaulow, N.

    2008-12-01

    Sequestration of CO2 into geologic formations requires long-term storage and low leakage rates to be effective. Active and abandoned wells in candidate storage formations must be evaluated as potential leakage points. Wellbore integrity is an important part of an overall integrated assessment program being developed at NETL to assess potential risks at CO2 storage sites. Such a program is needed for ongoing policy and regulatory decisions for geologic carbon sequestration. The permeability and integrity of the cement in the well is a primary factor affecting its ability to prevent leakage. Cement must be able to maintain low permeability over lengthy exposure to reservoir conditions in a CO2 injection and storage scenario. Although it is known that cement may be altered by exposure to CO2, the results of ongoing research indicate that cement curing conditions, fluid properties, and cement additives play a significant role in the rate of alteration and reaction. The objective of this study is to improve understanding of the factors affecting wellbore cement integrity for large-scale geologic carbon sequestration projects. Due to the high frequency use of additives (pozzolan) in wellbore cement, it is also essential to understand the reaction of these cement-pozzolan systems upon exposure to CO2 under sequestration conditions (15.5 MPa and 50°C). Laboratory experiments were performed to determine the physical and chemical changes, as well as the rate of alteration of commonly used pozzolan-cement systems under simulated sequestration reservoir conditions, including both supercritical CO2 and CO2-saturated brine. The rate of alteration of the cement-pozzolan systems is considerably faster than with neat cement. However, the alteration of physical properties is much less significant with the pozzolanic blends. Permeability of a carbonated pozzolanic cement paste remains sufficiently small to block significant vertical migration of CO2 in a wellbore. All of the

  13. Meta-code for systematic analysis of chemical addition (SACHA): application to fluorination of C70 and carbon nanostructure growth.

    PubMed

    Ewels, Christopher P; Lier, Gregory Van; Geerlings, Paul; Charlier, Jean-Christophe

    2007-01-01

    We present a new computer program able to systematically study chemical addition to and growth or evolution of carbon nanostructures. SACHA is a meta-code able to exploit a wide variety of pre-existing molecular structure codes, automating the otherwise onerous task of constructing, running, and analyzing the large number of input files that are required when exploring structural isomers and addition paths. By way of examples we consider fluorination of the fullerene cage C70 and carbon nanostructure growth through C2 addition. We discuss the possibilities for extension of this technique to rapidly and efficiently explore structural energy landscapes and application to other areas of chemical and materials research.

  14. Students' Predictions about the Sensory Properties of Chemical Compounds: Additive versus Emergent Frameworks

    ERIC Educational Resources Information Center

    Talanquer, Vicente

    2008-01-01

    We investigated general chemistry students' intuitive ideas about the expected properties of the products of a chemical reaction. In particular, we analyzed college chemistry students' predictions about the color, smell, and taste of the products of chemical reactions represented at the molecular level. The study was designed to explore the extent…

  15. 75 FR 17333 - Addition of National Toxicology Program Carcinogens; Community Right-to-Know Toxic Chemical...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-06

    ... affected by this action if you manufacture, process, or otherwise use any of the chemicals ] included in... 372 subpart B of Title 40 of the Code of Federal Regulations. If you have questions regarding the.... EPCRA section 313(d)(2) states that EPA may add a chemical to the list if any of the listing......

  16. Teachers' Misconceptions about the Effects of Addition of More Reactants or Products on Chemical Equilibrium

    ERIC Educational Resources Information Center

    Cheung, Derek; Ma, Hong-jia; Yang, Jie

    2009-01-01

    The importance of research on misconceptions about chemical equilibrium is well recognized by educators, but in the past, researchers' interest has centered on student misconceptions and has neglected teacher misconceptions. Focusing on the effects of adding more reactants or products on chemical equilibrium, this article discusses the various…

  17. Development and substrate specificity screening of an in vivo biosensor for the detection of biomass derived aromatic chemical building blocks† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6cc04559f Click here for additional data file.

    PubMed Central

    Machado, Leopoldo F. M.

    2016-01-01

    Measuring substrate and/or product concentration can create a major bottleneck for synthetic and biosynthetic processes. Here we report the development and substrate screening of a whole cell biosensor to detect biomass-derived aromatic chemical building blocks, supporting the use of sustainable feedstocks in the bulk and fine chemical industries. PMID:27722239

  18. Entering new publication territory in chemoinformatics and chemical information science.

    PubMed

    Bajorath, Jürgen

    2015-01-01

    The F1000Research publishing platform offers the opportunity to launch themed article collections as a part of its dynamic publication environment. The idea of article collections is further expanded through the generation of publication channels that focus on specific scientific areas or disciplines. This editorial introduces the Chemical Information Science channel of F1000Research designed to collate high-quality publications and foster a culture of open peer review. Articles will be selected by guest editor(s) and a group of experts, the channel Editorial Board, and subjected to open peer review.

  19. Entering new publication territory in chemoinformatics and chemical information science

    PubMed Central

    Bajorath, Jürgen

    2015-01-01

    The F1000Research publishing platform offers the opportunity to launch themed article collections as a part of its dynamic publication environment. The idea of article collections is further expanded through the generation of publication channels that focus on specific scientific areas or disciplines. This editorial introduces the Chemical Information Science channel of F1000Research designed to collate high-quality publications and foster a culture of open peer review. Articles will be selected by guest editor(s) and a group of experts, the channel Editorial Board, and subjected to open peer review. PMID:26097687

  20. "The Dose Makes the Poison": Informing Consumers About the Scientific Risk Assessment of Food Additives.

    PubMed

    Bearth, Angela; Cousin, Marie-Eve; Siegrist, Michael

    2016-01-01

    Intensive risk assessment is required before the approval of food additives. During this process, based on the toxicological principle of "the dose makes the poison,ˮ maximum usage doses are assessed. However, most consumers are not aware of these efforts to ensure the safety of food additives and are therefore sceptical, even though food additives bring certain benefits to consumers. This study investigated the effect of a short video, which explains the scientific risk assessment and regulation of food additives, on consumers' perceptions and acceptance of food additives. The primary goal of this study was to inform consumers and enable them to construct their own risk-benefit assessment and make informed decisions about food additives. The secondary goal was to investigate whether people have different perceptions of food additives of artificial (i.e., aspartame) or natural origin (i.e., steviolglycoside). To attain these research goals, an online experiment was conducted on 185 Swiss consumers. Participants were randomly assigned to either the experimental group, which was shown a video about the scientific risk assessment of food additives, or the control group, which was shown a video about a topic irrelevant to the study. After watching the video, the respondents knew significantly more, expressed more positive thoughts and feelings, had less risk perception, and more acceptance than prior to watching the video. Thus, it appears that informing consumers about complex food safety topics, such as the scientific risk assessment of food additives, is possible, and using a carefully developed information video is a successful strategy for informing consumers. PMID:25951078

  1. "The Dose Makes the Poison": Informing Consumers About the Scientific Risk Assessment of Food Additives.

    PubMed

    Bearth, Angela; Cousin, Marie-Eve; Siegrist, Michael

    2016-01-01

    Intensive risk assessment is required before the approval of food additives. During this process, based on the toxicological principle of "the dose makes the poison,ˮ maximum usage doses are assessed. However, most consumers are not aware of these efforts to ensure the safety of food additives and are therefore sceptical, even though food additives bring certain benefits to consumers. This study investigated the effect of a short video, which explains the scientific risk assessment and regulation of food additives, on consumers' perceptions and acceptance of food additives. The primary goal of this study was to inform consumers and enable them to construct their own risk-benefit assessment and make informed decisions about food additives. The secondary goal was to investigate whether people have different perceptions of food additives of artificial (i.e., aspartame) or natural origin (i.e., steviolglycoside). To attain these research goals, an online experiment was conducted on 185 Swiss consumers. Participants were randomly assigned to either the experimental group, which was shown a video about the scientific risk assessment of food additives, or the control group, which was shown a video about a topic irrelevant to the study. After watching the video, the respondents knew significantly more, expressed more positive thoughts and feelings, had less risk perception, and more acceptance than prior to watching the video. Thus, it appears that informing consumers about complex food safety topics, such as the scientific risk assessment of food additives, is possible, and using a carefully developed information video is a successful strategy for informing consumers.

  2. TANK 40 FINAL SB5 CHEMICAL CHARACTERIZATION RESULTS PRIOR TO NP ADDITION

    SciTech Connect

    Bannochie, C.; Click, D.

    2010-01-06

    A sample of Sludge Batch 5 (SB5) was pulled from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). This sample was also analyzed for chemical composition including noble metals. Prior to radionuclide inventory analyses, a final sample of the H-canyon Np stream will be added to bound the Np addition anticipated for Tank 40. These analyses along with the WAPS radionuclide analyses will help define the composition of the sludge in Tank 40 that is currently being fed to DWPF as SB5. At the Savannah River National Laboratory (SRNL) the 3-L Tank 40 SB5 sample was transferred from the shipping container into a 4-L high density polyethylene vessel and solids allowed to settle overnight. Supernate was then siphoned off and circulated through the shipping container to complete the transfer of the sample. Following thorough mixing of the 3-L sample, a 239 g sub-sample was removed. This sub-sample was then utilized for all subsequent analytical samples. Eight separate aliquots of the slurry were digested, four with HNO{sub 3}/HCl (aqua regia) in sealed Teflon{reg_sign} vessels and four in Na{sub 2}O{sub 2} (alkali or peroxide fusion) using Zr crucibles. Due to the use of Zr crucibles and Na in the peroxide fusions, Na and Zr cannot be determined from this preparation. Additionally, other alkali metals, such as Li and K that may be contaminants in the Na{sub 2}O{sub 2} are not determined from this preparation. Three Analytical Reference Glass - 14 (ARG-1) standards were digested along with a blank for each preparation. The ARG-1 glass allows for an assessment of the completeness of each digestion. Each aqua regia digestion and blank was diluted to 1:100 mL with deionized water and submitted to Analytical Development (AD) for inductively coupled plasma - atomic emission spectroscopy (ICPAES) analysis, inductively coupled plasma - mass spectrometry (ICP-MS) analysis of masses 81-209 and 230

  3. TANK 40 FINAL SB5 CHEMICAL CHARACTERIZATION RESULTS PRIOR TO NP ADDITION

    SciTech Connect

    Bannochie, C; Damon Click, D

    2009-02-26

    A sample of Sludge Batch 5 (SB5) was pulled from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). This sample was also analyzed for chemical composition including noble metals. Prior to radionuclide inventory analyses, a final sample of the H-canyon Np stream will be added to bound the Np addition anticipated for Tank 40. These analyses along with the WAPS radionuclide analyses will help define the composition of the sludge in Tank 40 that is currently being fed to DWPF as SB5. At the Savannah River National Laboratory (SRNL) the 3-L Tank 40 SB5 sample was transferred from the shipping container into a 4-L high density polyethylene vessel and solids allowed to settle overnight. Supernate was then siphoned off and circulated through the shipping container to complete the transfer of the sample. Following thorough mixing of the 3-L sample, a 239 g sub-sample was removed. This sub-sample was then utilized for all subsequent analytical samples. Eight separate aliquots of the slurry were digested, four with HNO{sub 3}/HCl (aqua regia) in sealed Teflon{reg_sign} vessels and four in Na{sub 2}O{sub 2} (alkali or peroxide fusion) using Zr crucibles. Due to the use of Zr crucibles and Na in the peroxide fusions, Na and Zr cannot be determined from this preparation. Additionally, other alkali metals, such as Li and K that may be contaminants in the Na{sub 2}O{sub 2} are not determined from this preparation. Three Analytical Reference Glass-1 (ARG-1) standards were digested along with a blank for each preparation. The ARG-1 glass allows for an assessment of the completeness of each digestion. Each aqua regia digestion and blank was diluted to 1:100 mL with deionized water and submitted to Analytical Development (AD) for inductively coupled plasma--atomic emission spectroscopy (ICPAES) analysis, inductively coupled plasma--mass spectrometry (ICP-MS) analysis of masses 81-209 and 230

  4. Effects of xanthan, guar, carrageenan and locust bean gum addition on physical, chemical and sensory properties of meatballs.

    PubMed

    Demirci, Zeynep Ozben; Yılmaz, Ismail; Demirci, Ahmet Şukru

    2014-05-01

    This study evaluated the effects of xanthan gum, guar gum, carrageenan and locust bean gum on physical, chemical and sensory properties of meatballs. Meatball samples were produced with three different formulations including of 0.5, 1, and 1.5% each gum addition and gum added samples were compared with the control meatballs. Physical and chemical analyses were carried out on raw and cooked samples separately. Moisture contents of raw samples decreased by addition of gums. There were significant decreases (p < 0.05) in moisture and fat contents of raw and cooked meatball samples formulated with gum when compared with control. Ash contents and texture values increased with gum addition to meatballs. Meatball redness decreased with more gum addition in raw and cooked meatball samples, which means that addition of gums resulted in a lighter-coloured product. According to sensory analysis results, locust bean gum added (1%) samples were much preferred by the panelists.

  5. Effects of xanthan, guar, carrageenan and locust bean gum addition on physical, chemical and sensory properties of meatballs.

    PubMed

    Demirci, Zeynep Ozben; Yılmaz, Ismail; Demirci, Ahmet Şukru

    2014-05-01

    This study evaluated the effects of xanthan gum, guar gum, carrageenan and locust bean gum on physical, chemical and sensory properties of meatballs. Meatball samples were produced with three different formulations including of 0.5, 1, and 1.5% each gum addition and gum added samples were compared with the control meatballs. Physical and chemical analyses were carried out on raw and cooked samples separately. Moisture contents of raw samples decreased by addition of gums. There were significant decreases (p < 0.05) in moisture and fat contents of raw and cooked meatball samples formulated with gum when compared with control. Ash contents and texture values increased with gum addition to meatballs. Meatball redness decreased with more gum addition in raw and cooked meatball samples, which means that addition of gums resulted in a lighter-coloured product. According to sensory analysis results, locust bean gum added (1%) samples were much preferred by the panelists. PMID:24803701

  6. Effect of Operating Parameters and Chemical Additives on Crystal Habit and Specific Cake Resistance of Zinc Hydroxide Precipitates

    SciTech Connect

    Alwin, Jennifer Louise

    1999-08-01

    The effect of process parameters and chemical additives on the specific cake resistance of zinc hydroxide precipitates was investigated. The ability of a slurry to be filtered is dependent upon the particle habit of the solid and the particle habit is influenced by certain process variables. The process variables studied include neutralization temperature, agitation type, and alkalinity source used for neutralization. Several commercially available chemical additives advertised to aid in solid/liquid separation were also examined in conjunction with hydroxide precipitation. A statistical analysis revealed that the neutralization temperature and the source of alkalinity were statistically significant in influencing the specific cake resistance of zinc hydroxide precipitates in this study. The type of agitation did not significantly effect the specific cake resistance of zinc hydroxide precipitates. The use of chemical additives in conjunction with hydroxide precipitation had a favorable effect on the filterability. The morphology of the hydroxide precipitates was analyzed using scanning electron microscopy.

  7. The past and future of chemical information - A report of the Chemical Information Division Session of the 200th Meeting of the American Chemical Society

    NASA Astrophysics Data System (ADS)

    Tokizane, Soichi

    At the historical meeting of the ACS CINF Division, the 1990 Herman Skolnik Award was presented to Dr. Ernst Meyer, who at BASF in Germany had developed a computer storage and retrieval system of chemical structures in 1960s. His and his colleagues' speeches in the award symposium were about the history of the development of chemical structure information in Germany. In the symposium of the Markush structure system, a hottest topic in this field, CAS's MARPAT and Markush-DARC co-developed by Questel, INPI, and Derwent were discussed by many papers. Other topics of this meeting were discussed, too.

  8. 77 FR 22559 - Proposed Information Collection; Comment Request; Chemical Weapons Convention Provisions of the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-16

    ... Bureau of Industry and Security Proposed Information Collection; Comment Request; Chemical Weapons...) 482-4895, Lawrence.Hall@bis.doc.gov . SUPPLEMENTARY INFORMATION: I. Abstract The Chemical Weapons... weapons (CW). The CWC prohibits the use, development, production, acquisition, stockpiling, retention,...

  9. 6 CFR 27.200 - Information regarding security risk for a chemical facility.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 6 Domestic Security 1 2012-01-01 2012-01-01 false Information regarding security risk for a... SECRETARY CHEMICAL FACILITY ANTI-TERRORISM STANDARDS Chemical Facility Security Program § 27.200 Information regarding security risk for a chemical facility. (a) Information to determine security risk. In order...

  10. 6 CFR 27.200 - Information regarding security risk for a chemical facility.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 6 Domestic Security 1 2013-01-01 2013-01-01 false Information regarding security risk for a... SECRETARY CHEMICAL FACILITY ANTI-TERRORISM STANDARDS Chemical Facility Security Program § 27.200 Information regarding security risk for a chemical facility. (a) Information to determine security risk. In order...

  11. 6 CFR 27.200 - Information regarding security risk for a chemical facility.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 6 Domestic Security 1 2014-01-01 2014-01-01 false Information regarding security risk for a... SECRETARY CHEMICAL FACILITY ANTI-TERRORISM STANDARDS Chemical Facility Security Program § 27.200 Information regarding security risk for a chemical facility. (a) Information to determine security risk. In order...

  12. 6 CFR 27.200 - Information regarding security risk for a chemical facility.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 6 Domestic Security 1 2011-01-01 2011-01-01 false Information regarding security risk for a... SECRETARY CHEMICAL FACILITY ANTI-TERRORISM STANDARDS Chemical Facility Security Program § 27.200 Information regarding security risk for a chemical facility. (a) Information to determine security risk. In order...

  13. USING DOSE ADDITION TO ESTIMATE CUMULATIVE RISKS FROM EXPOSURES TO MULTIPLE CHEMICALS

    EPA Science Inventory

    The Food Quality Protection Act (FQPA) of 1996 requires the EPA to consider the cumulative risk from exposure to multiple chemicals that have a common mechanism of toxicity. Three methods, hazard index (HI), point-of-departure index (PODI), and toxicity equivalence factor (TEF), ...

  14. 75 FR 72727 - Addition of National Toxicology Program Carcinogens; Community Right-to-Know Toxic Chemical...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-26

    ... emissions from vegetation, particularly from deciduous forests. The commenter cited sources that state that... criterion.'' EPA has published in the Federal Register of November 30, 1994 (59 FR 61432) a statement... EPCRA section 313 list of toxic chemicals? As discussed in the proposed rule (75 FR 17333, April 6,...

  15. Rapid engineering of versatile molecular logic gates using heterologous genetic transcriptional modules† †Electronic supplementary information (ESI) available: Supplementary methods, gene regulatory sequences used, the characterised dose responses of the single-input Buffer gate and the three promoter inputs under various cognate chemical induction levels. See DOI: 10.1039/c4cc05264a Click here for additional data file.

    PubMed Central

    Buck, Martin

    2014-01-01

    We designed and constructed versatile modular genetic logic gates in bacterial cells. These function as digital logic 1-input Buffer gate, 2-input and 3-input AND gates with one inverted input and integrate multiple chemical input signals in customised logic manners. Such rapidly engineered devices serve to achieve increased sensing signal selectivity. PMID:25062273

  16. 38 CFR 61.15 - Capital grants-obtaining additional information and awarding capital grants.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2014-07-01 2014-07-01 false Capital grants-obtaining additional information and awarding capital grants. 61.15 Section 61.15 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM Capital Grants § 61.15...

  17. 16 CFR 803.21 - Additional information shall be supplied within reasonable time.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Additional information shall be supplied within reasonable time. 803.21 Section 803.21 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF...

  18. 16 CFR 803.21 - Additional information shall be supplied within reasonable time.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Additional information shall be supplied within reasonable time. 803.21 Section 803.21 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF...

  19. 13 CFR 126.403 - May SBA require additional information from a HUBZone SBC?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false May SBA require additional information from a HUBZone SBC? 126.403 Section 126.403 Business Credit and Assistance SMALL BUSINESS... adverse inference from the failure of a HUBZone SBC to cooperate with a program examination or...

  20. 13 CFR 126.403 - May SBA require additional information from a HUBZone SBC?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 13 Business Credit and Assistance 1 2013-01-01 2013-01-01 false May SBA require additional information from a HUBZone SBC? 126.403 Section 126.403 Business Credit and Assistance SMALL BUSINESS... adverse inference from the failure of a HUBZone SBC to cooperate with a program examination or...

  1. 13 CFR 126.403 - May SBA require additional information from a HUBZone SBC?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false May SBA require additional information from a HUBZone SBC? 126.403 Section 126.403 Business Credit and Assistance SMALL BUSINESS... adverse inference from the failure of a HUBZone SBC to cooperate with a program examination or...

  2. 18 CFR 33.3 - Additional information requirements for applications involving horizontal competitive impacts.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additional information... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE... role that entry could play in mitigating adverse competitive effects of the transaction; (3)...

  3. 18 CFR 33.3 - Additional information requirements for applications involving horizontal competitive impacts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Additional information... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE... role that entry could play in mitigating adverse competitive effects of the transaction; (3)...

  4. 18 CFR 33.4 - Additional information requirements for applications involving vertical competitive impacts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Additional information... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE... competitive effects of the transaction. (ii) The potential for entry in the market and the role that...

  5. 18 CFR 33.4 - Additional information requirements for applications involving vertical competitive impacts.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Additional information... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE... competitive effects of the transaction. (ii) The potential for entry in the market and the role that...

  6. 18 CFR 33.4 - Additional information requirements for applications involving vertical competitive impacts.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Additional information... and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE... competitive effects of the transaction. (ii) The potential for entry in the market and the role that...

  7. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Confidentiality of data and information in color additive petitions. 71.15 Section 71.15 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... established in § 20.61 of this chapter. (6) All records showing the Food and Drug Administration's testing...

  8. 76 FR 24854 - Proposed Information Collection; Comment Request; Additional Protocol Report Forms

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-03

    ... International Atomic Energy Agency (IAEA) on a number of commercial nuclear and nuclear-related items, materials... for a nuclear weapons program. These forms provides the IAEA with information about additional aspects...; buildings on sites of facilities selected by the IAEA from the U.S. Eligible Facilities List;...

  9. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What additional information must I submit with my APD? 250.418 Section 250.418 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND... plot if the well is to be directionally drilled; (d) A Hydrogen Sulfide Contingency Plan (see §...

  10. 30 CFR 250.418 - What additional information must I submit with my APD?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Applying for A Permit to Drill § 250.418 What additional information must I submit with my APD? You must include the following with the APD: (a) Rated capacities of the drilling rig and...

  11. 38 CFR 39.4 - Decision makers, notifications, and additional information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2011-07-01 2011-07-01 false Decision makers, notifications, and additional information. 39.4 Section 39.4 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) AID TO STATES FOR ESTABLISHMENT, EXPANSION, AND IMPROVEMENT,...

  12. 38 CFR 39.4 - Decision makers, notifications, and additional information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2014-07-01 2014-07-01 false Decision makers, notifications, and additional information. 39.4 Section 39.4 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) AID FOR THE ESTABLISHMENT, EXPANSION, AND IMPROVEMENT, OR...

  13. 38 CFR 39.4 - Decision makers, notifications, and additional information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Decision makers, notifications, and additional information. 39.4 Section 39.4 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) AID FOR THE ESTABLISHMENT, EXPANSION, AND IMPROVEMENT, OR...

  14. 38 CFR 39.4 - Decision makers, notifications, and additional information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2013-07-01 2013-07-01 false Decision makers, notifications, and additional information. 39.4 Section 39.4 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) AID FOR THE ESTABLISHMENT, EXPANSION, AND IMPROVEMENT, OR...

  15. 26 CFR 1.852-7 - Additional information required in returns of shareholders.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... shareholders. 1.852-7 Section 1.852-7 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... Trusts § 1.852-7 Additional information required in returns of shareholders. Any person who fails or....852-6 requires the company to demand from its shareholders shall submit as a part of his income...

  16. The Effects of Chemical Wash Additives on the Corrosion of Aerospace Alloys in Marine Environments

    NASA Technical Reports Server (NTRS)

    MacDowell, Louis; Calle, Luz Marina; Curran, Joseph; Hodge, Tim; Barile, Ronald; Heidersbach, Robert; Steinrock, T. (Technical Monitor)

    2002-01-01

    This paper presents the methodology for comparing the relative effectiveness of four chemical products used for rinsing airplanes and helicopters. The products were applied on a weekly basis to a series of flat alloy panels exposed to an oceanfront marine environment for one year. The results are presented along with comparisons of exposures of the same alloys that were not washed, were washed with seawater, or washed with de-ionized water.

  17. Chemically diverse polymer microarrays and high throughput surface characterisation: a method for discovery of materials for stem cell culture† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c4bm00054d Click here for additional data file.

    PubMed Central

    Celiz, A. D.; Smith, J. G. W.; Patel, A. K.; Langer, R.; Anderson, D. G.; Barrett, D. A.; Young, L. E.; Davies, M. C.; Denning, C.

    2014-01-01

    Materials discovery provides the opportunity to identify novel materials that are tailored to complex biological environments by using combinatorial mixing of monomers to form large libraries of polymers as micro arrays. The materials discovery approach is predicated on the use of the largest chemical diversity possible, yet previous studies into human pluripotent stem cell (hPSC) response to polymer microarrays have been limited to 20 or so different monomer identities in each study. Here we show that it is possible to print and assess cell adhesion of 141 different monomers in a microarray format. This provides access to the largest chemical space to date, allowing us to meet the regenerative medicine challenge to provide scalable synthetic culture ware. This study identifies new materials suitable for hPSC expansion that could not have been predicted from previous knowledge of cell-material interactions. PMID:25328672

  18. Chemically diverse polymer microarrays and high throughput surface characterisation: a method for discovery of materials for stem cell culture†Electronic supplementary information (ESI) available. See DOI: 10.1039/c4bm00054dClick here for additional data file.

    PubMed

    Celiz, A D; Smith, J G W; Patel, A K; Langer, R; Anderson, D G; Barrett, D A; Young, L E; Davies, M C; Denning, C; Alexander, M R

    2014-11-30

    Materials discovery provides the opportunity to identify novel materials that are tailored to complex biological environments by using combinatorial mixing of monomers to form large libraries of polymers as micro arrays. The materials discovery approach is predicated on the use of the largest chemical diversity possible, yet previous studies into human pluripotent stem cell (hPSC) response to polymer microarrays have been limited to 20 or so different monomer identities in each study. Here we show that it is possible to print and assess cell adhesion of 141 different monomers in a microarray format. This provides access to the largest chemical space to date, allowing us to meet the regenerative medicine challenge to provide scalable synthetic culture ware. This study identifies new materials suitable for hPSC expansion that could not have been predicted from previous knowledge of cell-material interactions.

  19. Chemical and biological consequences of using carbon dioxide versus acid additions in ocean acidification experiments

    USGS Publications Warehouse

    Yates, Kimberly K.; DuFore, Christopher M.; Robbins, Lisa L.

    2013-01-01

    Use of different approaches for manipulating seawater chemistry during ocean acidification experiments has confounded comparison of results from various experimental studies. Some of these discrepancies have been attributed to whether addition of acid (such as hydrochloric acid, HCl) or carbon dioxide (CO2) gas has been used to adjust carbonate system parameters. Experimental simulations of carbonate system parameter scenarios for the years 1766, 2007, and 2100 were performed using the carbonate speciation program CO2SYS to demonstrate the variation in seawater chemistry that can result from use of these approaches. Results showed that carbonate system parameters were 3 percent and 8 percent lower than target values in closed-system acid additions, and 1 percent and 5 percent higher in closed-system CO2 additions for the 2007 and 2100 simulations, respectively. Open-system simulations showed that carbonate system parameters can deviate by up to 52 percent to 70 percent from target values in both acid addition and CO2 addition experiments. Results from simulations for the year 2100 were applied to empirically derived equations that relate biogenic calcification to carbonate system parameters for calcifying marine organisms including coccolithophores, corals, and foraminifera. Calculated calcification rates for coccolithophores, corals, and foraminifera differed from rates at target conditions by 0.5 percent to 2.5 percent in closed-system CO2 gas additions, from 0.8 percent to 15 percent in the closed-system acid additions, from 4.8 percent to 94 percent in open-system acid additions, and from 7 percent to 142 percent in open-system CO2 additions.

  20. Radiological, physical, and chemical characterization of additional alpha contaminated and mixed low-level waste for treatment at the advanced mixed waste treatment project

    SciTech Connect

    Hutchinson, D.P.

    1995-07-01

    This document provides physical, chemical, and radiological descriptive information for a portion of mixed waste that is potentially available for private sector treatment. The format and contents are designed to provide treatment vendors with preliminary information on the characteristics and properties for additional candidate portions of the Idaho National Engineering Laboratory (INEL) and offsite mixed wastes not covered in the two previous characterization reports for the INEL-stored low-level alpha-contaminated and transuranic wastes. This report defines the waste, provides background information, briefly reviews the requirements of the Federal Facility Compliance Act (P.L. 102-386), and relates the Site Treatment Plans developed under the Federal Facility Compliance Act to the waste streams described herein. Each waste is summarized in a Waste Profile Sheet with text, charts, and tables of waste descriptive information for a particular waste stream. A discussion of the availability and uncertainty of data for these waste streams precedes the characterization descriptions.

  1. Chemical genetics suggests a critical role for lysyl oxidase in zebrafish notochord morphogenesis† †Electronic supplementary information (ESI) available: Figure showing the of effect of 5 and 6 on the notochord and experimental details for compounds 2–6. See DOI: 10.1039/b613673g Click here for additional data file.

    PubMed Central

    Anderson, Carrie; Bartlett, Stephen J.; Gansner, John M.; Wilson, Duncan; He, Ling; Gitlin, Jonathan D.

    2007-01-01

    As a result of a chemical genetic screen for modulators of metalloprotease activity, we report that 2-mercaptopyridine-N-oxide induces a conspicuous undulating notochord defect in zebrafish embryos, a phenocopy of the leviathan mutant. The location of the chemically-induced wavy notochord correlated with the timing of application, thus defining a narrow chemical sensitivity window during segmentation stages. Microscopic observations revealed that notochord undulations appeared during the phase of notochord cell vacuolation and notochord elongation. Notochord cells become swollen as well as disorganized, while electron microscopy revealed disrupted organization of collagen fibrils in the surrounding sheath. We demonstrate by assay in zebrafish extracts that 2-mercaptopyridine-N-oxide inhibits lysyl oxidase. Thus, we provide insight into notochord morphogenesis and reveal novel compounds for lysyl oxidase inhibition. Taken together, these data underline the utility of small molecules for elucidating the dynamic mechanisms of early morphogenesis and provide a potential explanation for the recently established role of copper in zebrafish notochord formation. PMID:17216056

  2. The effect of chemical additives on the synthesis of ethanol. Technical progress report 5, September 16, 1988--December 15, 1988

    SciTech Connect

    Chuang, S.S.C.

    1989-02-04

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used will include S, P, Ag, Cu, Mn, and Na. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of studies including temperature programmed desorption, infrared study of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. A better understanding of the role of additive may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. CO insertion is known to be a key step to the formation of acetaldehyde and ethanol from CO hydrogenation over Rh catalysts. Ethylene hydroformylation has often served as a probe to determine CO insertion capabilities of Rh catalysts. The mechanism of CO insertion in ethylene hydroformylation over Rh/SiO{sub 2} was investigated.

  3. Effect of the Addition of Schisandra chinensis Powder on the Physico-chemical Characteristics of Sausage.

    PubMed

    Jin, S K; Park, J H

    2013-12-01

    The individual and interactive effects of Schisandra chinensis powder (SCP) and sodium nitrite additions on color, pH, water holding capacity, residual nitrite, 2-thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen, texture properties, fatty acids, amino acids and sensory evaluation of cooked pork sausages were investigated after 20 d of storage at 4°C. The powders (0, 0.5 and 1.0%) were added to sausages either alone or in combination with nitrite (0 and 100 ppm). SCP added-sausages showed lower L* (lightness) and W (whiteness) values, and higher b* (yellowness) values than sausage containing no nitrite, and exhibited the highest a(*) values at a 0.5% addition (p<0.05). Residual nitrite and TBARS values were found to be significantly reduced as the addition levels of SCP increased (p<0.05). As the addition of SCP increased, the sausage showed gradually decreased brittleness, cohesiveness, springiness, gumminess and chewiness, while adhesiveness increased. Polyunsaturated fatty acid, n-6 and n-6/n-3 fatty acid ratio concentrations were significantly higher in sausages containing SCP (p<0.05). The addition of SCP to sausage significantly (p<0.05) increased the ammonia content (by 0.5% SCP) and aromatic amino acid concentrations (by 1.0% SCP) (p<0.05). Inclusion of SCP in sausage meat resulted in a significant deterioration in quality characteristics of flavor, springiness, juiciness and overall acceptability (p<0.05). As expected, the observed changes in a*, W, pH, shear force, texture property, TBARS, fatty acid, amino acid and sensory score of sausages, depended on the rate of addition of nitrite (p<0.05). These results suggest that SCP addition is not an effective way of improving the sensory evaluation of sausages, but may beneficially affect TBARS, nitrite scavenging activity, fatty acid and amino acid content in pork sausages.

  4. Effect of the Addition of Schisandra chinensis Powder on the Physico-chemical Characteristics of Sausage

    PubMed Central

    Jin, S. K.; Park, J. H.

    2013-01-01

    The individual and interactive effects of Schisandra chinensis powder (SCP) and sodium nitrite additions on color, pH, water holding capacity, residual nitrite, 2-thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen, texture properties, fatty acids, amino acids and sensory evaluation of cooked pork sausages were investigated after 20 d of storage at 4°C. The powders (0, 0.5 and 1.0%) were added to sausages either alone or in combination with nitrite (0 and 100 ppm). SCP added-sausages showed lower L* (lightness) and W (whiteness) values, and higher b* (yellowness) values than sausage containing no nitrite, and exhibited the highest a* values at a 0.5% addition (p<0.05). Residual nitrite and TBARS values were found to be significantly reduced as the addition levels of SCP increased (p<0.05). As the addition of SCP increased, the sausage showed gradually decreased brittleness, cohesiveness, springiness, gumminess and chewiness, while adhesiveness increased. Polyunsaturated fatty acid, n-6 and n-6/n-3 fatty acid ratio concentrations were significantly higher in sausages containing SCP (p<0.05). The addition of SCP to sausage significantly (p<0.05) increased the ammonia content (by 0.5% SCP) and aromatic amino acid concentrations (by 1.0% SCP) (p<0.05). Inclusion of SCP in sausage meat resulted in a significant deterioration in quality characteristics of flavor, springiness, juiciness and overall acceptability (p<0.05). As expected, the observed changes in a*, W, pH, shear force, texture property, TBARS, fatty acid, amino acid and sensory score of sausages, depended on the rate of addition of nitrite (p<0.05). These results suggest that SCP addition is not an effective way of improving the sensory evaluation of sausages, but may beneficially affect TBARS, nitrite scavenging activity, fatty acid and amino acid content in pork sausages. PMID:25049766

  5. Evaluation of the protective effect of chemical additives in the oxidation of phenolic compounds catalysed by peroxidase.

    PubMed

    Torres, Juliana Arriel; Chagas, Pricila Maria Batista; Silva, Maria Cristina; Dos Santos, Custódio Donizete; Corrêa, Angelita Duarte

    2016-01-01

    The use of oxidoredutive enzymes in removing organic pollutants has been the subject of much research. The oxidation of phenolic compounds in the presence of chemical additives has been the focus of this study. In this investigation, the influence of the additives polyethylene glycol and Triton X-100 was evaluated in the phenol oxidation, caffeic acid, chlorogenic acid and total phenolic compounds present in coffee processing wastewater (CPW) at different pH values, performed by turnip peroxidase and peroxidase extracted from soybean seed hulls. The influence of these additives was observed only in the oxidation of phenol and caffeic acid. In the oxidation of other studied phenolic compounds, the percentage of oxidation remained unchanged in the presence of these chemical additives. In the oxidation of CPW in the presence of additives, no change in the oxidation of phenolic compounds was observed. Although several studies show the importance of evaluating the influence of additives on the behaviour of enzymes, this study found a positive response from the economic point of view for the treatment of real wastewater, since the addition of these substances showed no influence on the oxidation of phenolic compounds, which makes the process less costly.

  6. Evaluation of the protective effect of chemical additives in the oxidation of phenolic compounds catalysed by peroxidase.

    PubMed

    Torres, Juliana Arriel; Chagas, Pricila Maria Batista; Silva, Maria Cristina; Dos Santos, Custódio Donizete; Corrêa, Angelita Duarte

    2016-01-01

    The use of oxidoredutive enzymes in removing organic pollutants has been the subject of much research. The oxidation of phenolic compounds in the presence of chemical additives has been the focus of this study. In this investigation, the influence of the additives polyethylene glycol and Triton X-100 was evaluated in the phenol oxidation, caffeic acid, chlorogenic acid and total phenolic compounds present in coffee processing wastewater (CPW) at different pH values, performed by turnip peroxidase and peroxidase extracted from soybean seed hulls. The influence of these additives was observed only in the oxidation of phenol and caffeic acid. In the oxidation of other studied phenolic compounds, the percentage of oxidation remained unchanged in the presence of these chemical additives. In the oxidation of CPW in the presence of additives, no change in the oxidation of phenolic compounds was observed. Although several studies show the importance of evaluating the influence of additives on the behaviour of enzymes, this study found a positive response from the economic point of view for the treatment of real wastewater, since the addition of these substances showed no influence on the oxidation of phenolic compounds, which makes the process less costly. PMID:26502790

  7. 75 FR 35119 - 60-Day Notice of Proposed Information Collection: Form DS-4085 Application for Additional Visa...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-21

    ... Notice of Proposed Information Collection: Form DS-4085 Application for Additional Visa Pages or... the Paperwork Reduction Act of 1995. Title of Information Collection: Application for Additional Visa... collection: The information collected on the DS-4085 is used to facilitate the issuance of additional...

  8. 26 CFR 301.6223(c)-1 - Additional information regarding partners furnished to the Internal Revenue Service.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... shown on the partnership return, the Internal Revenue Service will use additional information as... additional information at any time by filing a written statement with the Internal Revenue Service. However...) of this section. (f) Internal Revenue Service may use other information. In addition to...

  9. 77 FR 71561 - Health and Safety Data Reporting; Addition of Certain Chemicals

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-03

    ... shown to be a developmental toxicant in animals, resulting in fetal malformations and other effects, but.... Federal Register (41 FR 36902, September 1, 1976). 2. EPA. Integrated Risk Information System. Cadmium... Environmental Protection Agency; Receipt of Report and Request for Comments; Notice. Federal Register (76...

  10. 75 FR 17939 - EMD Chemicals, Inc.; Withdrawal of Color Additive Petition

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-08

    ... the Federal Register of September 25, 1998 (63 FR 51359), FDA announced that a color additive petition... published an amended filing notice in the Federal Register of June 21, 1999 (64 FR 33097), indicating that... candies, nutritional supplement tablets and gelatin capsules, and chewing gum (71 FR 31927). The...

  11. Chemical additive to maximize antimicrobial effect of chlorine during pilot scale immersion chilling of broiler carcasses

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A prior laboratory scale study demonstrated the potential for T-128, a proprietary blend including propylene glycol and phosphoric acid, to enhance the antimicrobial efficacy of chlorine during immersion chilling of broiler parts. The objective of the current study was to test the addition of T-128...

  12. Does the Addition of Inert Gases at Constant Volume and Temperature Affect Chemical Equilibrium?

    ERIC Educational Resources Information Center

    Paiva, Joao C. M.; Goncalves, Jorge; Fonseca, Susana

    2008-01-01

    In this article we examine three approaches, leading to different conclusions, for answering the question "Does the addition of inert gases at constant volume and temperature modify the state of equilibrium?" In the first approach, the answer is yes as a result of a common students' alternative conception; the second approach, valid only for ideal…

  13. Anaerobic digestion of high-strength cheese whey utilizing semicontinuous digesters and chemical flocculant addition

    SciTech Connect

    Barford, J.P.; Cail, R.G.; Callander, I.J.; Floyd, E.J.

    1986-11-01

    Semicontinuous digesters were used to anaerobically treat high-strength whey (70 kg/cubic m COD). A maximum loading of 16.1 kg COD/cubic m/day was obtained with soluble COD removal efficiencies greater than 99%. The use of a chemical flocculant resulted in an increased biomass concentration in the digester compared to a control, thus enabling correspondingly higher space loadings to be applied. With the onset of substantial levels of granulation of the biomass, flocculant dosage was able to be discontinued. This article discusses the performance of the digesters in detail and, briefly, the long-term operational difficulties experienced and the control strategies employed on such systems. 24 references.

  14. Unravelling the chemical design of spin-crossover nanoparticles based on iron(ii)–triazole coordination polymers: towards a control of the spin transition† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5tc01093d Click here for additional data file.

    PubMed Central

    Giménez-Marqués, Mónica; García-Sanz de Larrea, M. Luisa

    2015-01-01

    A systematic study of the key synthetic parameters that control the growth of spin-crossover (SCO) nanoparticles (NPs) using the reverse micelle technique has been undertaken in the system [Fe(Htrz)2(trz)](BF4)·H2O, (Htrz = 1,2,4-triazole). This has permitted us to modulate the physical properties of the NPs in a controlled and reproducible manner. In particular, a control over the size of the NPs (in the range 4 to 16 nm) has been achieved by varying the water to surfactant molar ratio. The consequences of this size variation on the cooperativity of the spin transition are discussed. Finally, this approach has been extended to the chemical alloy [Fe(Htrz)2.95(NH2trz)0.05](ClO4)2 in order to prepare NPs exhibiting a cooperative and hysteretic spin transition centred closer to room temperature. PMID:27358736

  15. Factors affecting the microbial and chemical composition of silage. III. Effect of urea additions on maize silage.

    PubMed

    Mahmoud, S A; Abd-el-Hafez, A; Zaki, M M; Saleh, E A

    1978-01-01

    The effect of urea additions on the microbiological and chemical properties of silage, produced from young maize plants (Darawa stage), was studied. Urea treatments, i.e., 0.25%, 0.50%, 0.75%, and 1.00%, stimulated higher densities of the desired microorganisms than the control, while undesired organisms showed lower counts (proteolytic and saccharolytic anaerobes). Addition of 0.25 to 0.50% or urea resulted in the production of high quality silage with pleasant small and high nutritive value, as confirmed by the various microbiological and chemical analyses conducted. Higher levels (0.75 and 1.00%) of urea decreased the quality of the product. PMID:29417

  16. Effects of Microbial Additives on Chemical Composition and Fermentation Characteristics of Barley Silage

    PubMed Central

    Amanullah, S. M.; Kim, D. H.; Lee, H. J.; Joo, Y. H.; Kim, S. B.; Kim, S. C.

    2014-01-01

    This study examined the effects of bacterial inoculants on chemical composition and fermentation indices of barley silage. Barley forage (Youngyang) was harvested at 24% dry matter (DM) and wilted to 47.9% DM. The wilted barley forage was chopped to 3–5 cm length and applied with no inoculant (CON), L. plantarum (1×1010 cfu/g, LP) or Effective Microorganisms (0.5×109 cfu/g, EM). Then the forages were ensiled in four replications for each treatment in 20 L mini silos and stored for 100 days. The contents of crude protein and ether extract were higher in CON silage ensiled for 100-d, while the contents of DM and crude ash were higher in EM silage (p<0.05). The contents of ADF, NDF and hemicellulose as well as the in vitro DM digestibility were not affected by microbial inoculation (p>0.05). The pH, ammonia-N concentration and lactate to acetate ratio were higher (p<0.05) in CON silage, while lactate concentrations were higher (p<0.05) in CON and LP silage. Acetate concentration and lactic acid bacteria was increased (p<0.05) by both inoculants (LP and EM), but propionate concentration and yeast was increased (p<0.05) by EM and LP, respectively. These results indicated that the fermentation quality of barley silage was improved by the application of bacterial inoculants. PMID:25049981

  17. Current Research into Chemical and Textual Information Retrieval at the Department of Information Studies, University of Sheffield.

    ERIC Educational Resources Information Center

    Lynch, Michael F.; Willett, Peter

    1987-01-01

    Discusses research into chemical information and document retrieval systems at the University of Sheffield. Highlights include the use of cluster analysis methods for document retrieval and drug design, representation and searching of files of generic chemical structures, and the application of parallel computer hardware to information retrieval.…

  18. Panels of chemically-modified heparin polysaccharides and natural heparan sulfate saccharides both exhibit differences in binding to Slit and Robo, as well as variation between protein binding and cellular activity† †Electronic supplementary information (ESI) available: NMR chemical shift characterisation of modified heparins, protein sequence alignment methodology and data, protein binding and activity assay dose-response curves. See DOI: 10.1039/c6mb00432f Click here for additional data file.

    PubMed Central

    Ahmed, Yassir A.; Yates, Edwin A.; Moss, Diana J.; Loeven, Markus A.; Hussain, Sadaf-Ahmahni; Hohenester, Erhard; Turnbull, Jeremy E.

    2016-01-01

    Heparin/heparan sulfate (HS) glycosaminoglycans are required for Slit–Robo cellular responses. Evidence exists for interactions between each combination of Slit, Robo and heparin/HS and for formation of a ternary complex. Heparin/HS are complex mixtures displaying extensive structural diversity. The relevance of this diversity has been studied to a limited extent using a few select chemically-modified heparins as models of HS diversity. Here we extend these studies by parallel screening of structurally diverse panels of eight chemically-modified heparin polysaccharides and numerous natural HS oligosaccharide chromatographic fractions for binding to both Drosophila Slit and Robo N-terminal domains and for activation of a chick retina axon response to the Slit fragment. Both the polysaccharides and oligosaccharide fractions displayed variability in binding and cellular activity that could not be attributed solely to increasing sulfation, extending evidence for the importance of structural diversity to natural HS as well as model modified heparins. They also displayed differences in their interactions with Slit compared to Robo, with Robo preferring compounds with higher sulfation. Furthermore, the patterns of cellular activity across compounds were different to those for binding to each protein, suggesting that biological outcomes are selectively determined in a subtle manner that does not simply reflect the sum of the separate interactions of heparin/HS with Slit and Robo. PMID:27502551

  19. The Effects of Chemical Additives on the Induction Phase in Solid-State Thermal Decomposition of Ammonia Borane

    SciTech Connect

    Heldebrant, David J.; Karkamkar, Abhijeet J.; Hess, Nancy J.; Bowden, Mark E.; Rassat, Scot D.; Zheng, Feng; Rappe, Kenneth G.; Autrey, Thomas

    2008-08-26

    The solid-state decomposition of ammonia borane (AB) alone and in the presence of chemical additives was investigated by a series of experimental methods to develop an approach for reducing the induction period for hydrogen release. Gas chromatography techniques were used to measure the yield of hydrogen as a function of time under isothermal conditions between 70 and 90 °C, and the polyaminoborane (PAB) products produced from hydrogen loss from AB show significant cross linking by 11B NMR spectroscopy. Raman microscopy was used to follow the transformation of crystalline AB to amorphous AB with the subsequent formation of the diammoniate of diborane (DADB). A gas burette was used to monitor the time-dependent release of hydrogen from AB in the presence of chemical additives. The combination of these approaches provides insight into the mechanism of hydrogen release from solid AB. The release of molecular hydrogen is described by a process involving sequential induction (disruption of dihydrogen bonds), nucleation (formation of DADB), and growth (hydrogen release through dehydrocoupling). Addition of DADB or ammonium chloride to neat AB significantly reduces the induction time for hydrogen release. The authors wish to acknowledge support from the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. This work was performed as part of the Center of Excellence in Chemical Hydrogen Storage and in collaboration with the International Partnership for the Hydrogen Economy. Pacific Northwest National Laboratory is operated for the U.S. Department of Energy by Battelle.

  20. Chemical Information Literacy: pK[subscript a] Values--Where Do Students Go Wrong?

    ERIC Educational Resources Information Center

    Flynn, Alison B.; Amellal, Delphine G.

    2016-01-01

    Chemical information literacy is an essential skillset for navigating, evaluating, and using the wealth of print and online information. Accordingly, efforts are underway to improve students' acquisition and mastery of this skillset. However, less is known about students' abilities related to finding and using chemical information to solve…

  1. The effect of a chemical additive on the fermentation and aerobic stability of high-moisture corn.

    PubMed

    Da Silva, T C; Smith, M L; Barnard, A M; Kung, L

    2015-12-01

    The objective of this experiment was to evaluate the effect of a chemical additive on the fermentation and aerobic stability of high-moisture corn (HMC). Ground HMC (~63% dry matter) was untreated, or treated with an additive containing sodium benzoate, potassium sorbate, and sodium nitrite as active ingredients, at 0, 2, 3, or 4 L/t of fresh matter. Laboratory silos (7.5 L) were prepared and ensiled for 21 and 90d (4 silos/treatment per d of ensiling). Small bag silos were prepared for untreated HMC and HMC treated with 4 L/t of the additive and analyzed for nitrate-N and nitrite-N after 0, 3, and 7d of ensiling. The concentration of nitrate-N was similar between these 2 treatments and was below levels considered problematic for ruminants. Nitrite-N was greater in HMC treated with the high level of additive but was also very low for both treatments. Numbers of yeasts were similar among treatments in fresh HMC and decreased substantially after ensiling. Numbers of yeasts were similar among treatments after 21d of ensiling but after 90d they were lower in treated versus untreated HMC. Concentrations of organic acids (lactic, acetic, and propionic) and pH were not different among treatments at any time of ensiling. In contrast, treatment with the additive markedly decreased the concentration of ethanol in HMC after 21 and 90d when compared with untreated HMC. Treatment with all levels of the additive markedly improved the aerobic stability and improved the recovery of dry matter compared with untreated HMC. Overall, our findings suggest that the chemical additive used in this study has the potential to improve the fermentation and aerobic stability of HMC after a relatively short period (21d) and after a moderate length (90d) of ensiling. PMID:26454298

  2. Effect of addition of Versagel on microbial, chemical, and physical properties of low-fat yogurt.

    PubMed

    Ramchandran, L; Shah, N P

    2008-09-01

    The objective of this study was to examine the effect of Versagel on the growth and proteolytic activity of Streptococcus thermophilus 1275 and Lactobacillus delbrueckii ssp. bulgaricus 1368 and angiotensin-I converting enzyme inhibitory activity of the peptides generated thereby as well as on the physical properties of low-fat yogurt during a storage period of 28 d at 4 degrees C. Three different types of low-fat yogurts, YV0, YV1, and YV2, were prepared using Versagel as a fat replacer. The fermentation time of the low-fat yogurts containing Versagel was less than that of the control yogurt (YV0). The starter cultures maintained their viability (8.68 to 8.81 log CFU/g of S. thermophilus and 8.51 to 8.81 log CFU/g of L. delbrueckii ssp. bulgaricus) in all the yogurts throughout the storage period. There was some decrease in the pH of the yogurts during storage and an increase in the concentration of lactic acid. However, the proteolytic and ACE-inhibitory potential of the starter cultures was suppressed in the presence of Versagel. On the other hand, the addition of Versagel had a positive impact on the physical properties of the low-fat yogurt, namely, spontaneous whey separation, firmness, and pseudoplastic properties.

  3. PAT-1 safety analysis report addendum author responses to request for additional information.

    SciTech Connect

    Weiner, Ruth F.; Schmale, David T.; Kalan, Robert J.; Akin, Lili A.; Miller, David Russell; Knorovsky, Gerald Albert; Yoshimura, Richard Hiroyuki; Lopez, Carlos; Harding, David Cameron; Jones, Perry L.; Morrow, Charles W.

    2010-09-01

    The Plutonium Air Transportable Package, Model PAT-1, is certified under Title 10, Code of Federal Regulations Part 71 by the U.S. Nuclear Regulatory Commission (NRC) per Certificate of Compliance (CoC) USA/0361B(U)F-96 (currently Revision 9). The National Nuclear Security Administration (NNSA) submitted SAND Report SAND2009-5822 to NRC that documented the incorporation of plutonium (Pu) metal as a new payload for the PAT-1 package. NRC responded with a Request for Additional Information (RAI), identifying information needed in connection with its review of the application. The purpose of this SAND report is to provide the authors responses to each RAI. SAND Report SAND2010-6106 containing the proposed changes to the Addendum is provided separately.

  4. 20 CFR 30.518 - Can OWCP require the recipient of the overpayment to submit additional financial information?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... overpayment to submit additional financial information? 30.518 Section 30.518 Employees' Benefits OFFICE OF... OWCP require the recipient of the overpayment to submit additional financial information? (a) The recipient of the overpayment is responsible for providing information about income, expenses and assets...

  5. Effects of 8 chemical and bacterial additives on the quality of corn silage.

    PubMed

    Queiroz, O C M; Arriola, K G; Daniel, J L P; Adesogan, A T

    2013-09-01

    This project aimed to evaluate the effects 8 additives on the fermentation, dry matter (DM) losses, nutritive value, and aerobic stability of corn silage. Corn forage harvested at 31% DM was chopped (10mm) and treated with (1) deionized water (control); (2) Buchneri 500 (BUC; 1×10(5) cfu/g of Pediococcus pentosaceus 12455 and 4×10(5) cfu/g of Lactobacillus buchneri 40788; Lallemand Animal Nutrition, Milwaukee, WI); (3) sodium benzoate (BEN; 0.1% of fresh forage); (4) Silage Savor acid mixture (SAV: 0.1% of fresh forage; Kemin Industries Inc., Des Moines, IA); (5) 1×10(6) cfu/g of Acetobacter pasteurianus-ATCC 9323; (6) 1×10(6) cfu/g of Gluconobacter oxydans-ATCC 621; (7) Ecosyl 200T (1×10(5) cfu/g of Lactobacillus plantarum MTD/1; Ecosyl Products Inc., Byron, IL); (8) Silo-King WS (1.5×10(5) cfu/g of L. plantarum, P. pentosaceus and Enterococcus faecium; Agri-King, Fulton, IL); and (9) Biomax 5 (BIO; 1×10(5) cfu/g of L. plantarum PA-28 and K-270; Chr. Hansen Animal Health and Nutrition, Milwaukee, WI). Treated forage was ensiled in quadruplicate in mini silos at a density of 172 kg of DM/m(3) for 3 and 120 d. After 3 d of ensiling, the pH of all silages was below 4 but ethanol concentrations were least in BEN silage (2.03 vs. 3.24% DM) and lactic acid was greatest in SAV silage (2.97 vs. 2.51% DM). Among 120-d silages, additives did not affect DM recovery (mean=89.8% ± 2.27) or in vitro DM digestibility (mean=71.5% ± 0.63). The SAV silage had greater ammonia-N (0.85 g/kg of DM) and butyric acid (0.22 vs. 0.0% DM) than other treatments. In contrast, BEN and Silo-King silages had the least ammonia-N concentration and had no butyric acid. The BEN and A. pasteurianus silages had the lowest pH (3.69) and BEN silage had the least ethanol (1.04% DM) and ammonia nitrogen (0.64 g/kg DM) concentrations, suggesting that fermentation was more extensive and protein degradation was less in BEN silages. The BUC and BIO silages had greater acetic acid concentrations than

  6. 78 FR 28586 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-15

    ...) Acid donor for (S) Ethanol, 2,2'- dyeing nylon and oxybis-,1,1'- nylon containing diformate. fabrics. P... C14 18, C16-C18 chemical. unsaturated, from fermentation. P-13-0319 3/1/2013 5/29/2013 CBI (G) Industrial (G) Glycerides, feedstock C14 18, C16-C18 chemical. unsaturated, from fermentation. P-13-0320...

  7. A Chemical Information Literacy Program for First-Year Students

    ERIC Educational Resources Information Center

    Gawalt, Ellen S.; Adams, Barbara

    2011-01-01

    The ability to navigate and understand the chemical literature is integral to the scientific research process. Learning these skills is therefore an important, though often overwhelming, part of an undergraduate chemical education. We describe an inquiry-based program designed to help chemistry students begin to learn to search and read the…

  8. Activation and stabilization of the hydroperoxide lyase enzymatic extract from mint leaves (Mentha spicata) using selected chemical additives.

    PubMed

    Akacha, Najla B; Karboune, Salwa; Gargouri, Mohamed; Kermasha, Selim

    2010-03-01

    The effects of selected lyoprotecting excipients and chemical additives on the specific activity and the thermal stability of the hydroperoxide lyase (HPL) enzymatic extract from mint leaves were investigated. The addition of KCl (5%, w/w) and dextran (2.5%, w/w) to the enzymatic extract, prior to lyophilization, increased the HPL specific activity by 2.0- and 1.2-fold, respectively, compared to the control lyophilized extract. From half-life time (t (1/2)), it can be seen that KCl has enhanced the HPL stability by 1.3- to 2.3-fold, during long-period storage at -20 degrees Celsius and 4 degrees Celsius. Among the selected additives used throughout this study, glycine appeared to be the most effective one. In addition to the activation effect conferred by glycine, it also enhanced the HPL thermal stability. In contrast, polyhydroxyl-containing additives were not effective for stabilizing the HPL enzymatic extract. On the other hand, there was no signification increase in HPL activity and its thermal stability with the presence of Triton X-100. The results also showed that in the presence of glycine (10%), the catalytic efficiency of HPL was increased by 2.45-fold than that without additive.

  9. [Effects of different perlite additions on physical and chemical properties of sewage sludge compost and growth of Tagetes patula].

    PubMed

    Hu, Yu-Tong; Shi, Lian-Hui; Liu, Deng-Min; Tong, Shao-Wei; Wei, Mei-Yan; Sun, Jie

    2014-07-01

    In order to resolve the problem of poor permeability of sewage sludge compost (SSC) which was used as the substitution of peat, perlite was used to regulate the permeability of the sewage. The pure SSC was used as control. The proportions of perlite in the mixtures with SSC were 20%, 40%, 60%, 80% and 100% (V/V), respectively. The effects of different perlite ratios on the physical and chemical properties and the growth of Tagetes patula were studied. The bulk density, water holding porosity and water holding porosity to aeration porosity decreased, but the total porosity and aeration porosity increased with the increasing addition of perlite to the SSC. For the chemical properties, the pH increased, and the EC and nutrient contents decreased with the increasing addition of perlite to the SSC. The aboveground biomass and flowers of T. patula were the highest in the 60% perlite treatment, and the lowest in the pure SSC treatment. The root morphology and activity were the best in the 40%, 60% and 80% perlite treatments. Aeration was the strongest factor to impact the maximum root length and average root diameter. Perlite promoted the growth of T. patula mainly through impacting the physical properties of the SSC. The addition of 60% perlite to the SSC could significantly improve the poor aeration and decrease the high salinity greatly in the SSC and regulate the growth of the root and aboveground of T. patula. PMID:25345044

  10. Effect of Microbial and Chemical Combo Additives on Nutritive Value and Fermentation Characteristic of Whole Crop Barley Silage

    PubMed Central

    Kim, Dong Hyeon; Amanullah, Sardar M.; Lee, Hyuk Jun; Joo, Young Ho; Kim, Sam Churl

    2015-01-01

    This study was conducted to assess the effects of microbial and chemical combo additives on nutritive values, fermentation indices and aerobic stability of whole crop barley silage. Barley forage (Youngyang) was harvested at about 30% dry matter (DM) by treatments, chopped to 5 cm length and treated with distilled water only (CON), Lactobacillus plantarum (INO), propionic acid (PRO) or an equal mixture of INO and PRO (MIX). Barley forages were ensiled in 4 replications for 0, 2, 7, and 100 days. On 100 days of ensiling, MIX silage had higher (p<0.05) in vitro DM digestibility than CON silage, but lower (p<0.05) acid detergent fiber concentration. The pH in all treated silages was lower (p<0.05) than CON silage. The MIX silage had higher (p<0.05) lactate concentration and lactate to acetate ratio than in CON, but lower (p<0.05) yeast count. Aerobic stability in CON, PRO, and MIX silages were higher (p<0.05) than in INO silage. It is concluded that microbial and chemical combo additives using L. plantarum and propionic acid could efficiently improve nutritive values of barley silage in terms of increased in vitro DM digestibility compared to other treatments. In addition, all treatments except CON reduced yeast count which is the initiate microorganism of aerobic spoilage. PMID:26323517

  11. [Effects of different perlite additions on physical and chemical properties of sewage sludge compost and growth of Tagetes patula].

    PubMed

    Hu, Yu-Tong; Shi, Lian-Hui; Liu, Deng-Min; Tong, Shao-Wei; Wei, Mei-Yan; Sun, Jie

    2014-07-01

    In order to resolve the problem of poor permeability of sewage sludge compost (SSC) which was used as the substitution of peat, perlite was used to regulate the permeability of the sewage. The pure SSC was used as control. The proportions of perlite in the mixtures with SSC were 20%, 40%, 60%, 80% and 100% (V/V), respectively. The effects of different perlite ratios on the physical and chemical properties and the growth of Tagetes patula were studied. The bulk density, water holding porosity and water holding porosity to aeration porosity decreased, but the total porosity and aeration porosity increased with the increasing addition of perlite to the SSC. For the chemical properties, the pH increased, and the EC and nutrient contents decreased with the increasing addition of perlite to the SSC. The aboveground biomass and flowers of T. patula were the highest in the 60% perlite treatment, and the lowest in the pure SSC treatment. The root morphology and activity were the best in the 40%, 60% and 80% perlite treatments. Aeration was the strongest factor to impact the maximum root length and average root diameter. Perlite promoted the growth of T. patula mainly through impacting the physical properties of the SSC. The addition of 60% perlite to the SSC could significantly improve the poor aeration and decrease the high salinity greatly in the SSC and regulate the growth of the root and aboveground of T. patula.

  12. Effect of water treatment additives on lime softening residual trace chemical composition--implications for disposal and reuse.

    PubMed

    Cheng, Weizhi; Roessler, Justin; Blaisi, Nawaf I; Townsend, Timothy G

    2014-12-01

    Drinking water treatment residues (WTR) offer potential benefits when recycled through land application. The current guidance in Florida, US allows for unrestricted land application of lime softening WTR; alum and ferric WTR require additional evaluation of total and leachable concentrations of select trace metals prior to land application. In some cases a mixed WTR is produced when lime softening is accompanied by the addition of a coagulant or other treatment chemical; applicability of the current guidance is unclear. The objective of this research was to characterize the total and leachable chemical content of WTR from Florida facilities that utilize multiple treatment chemicals. Lime and mixed lime WTR samples were collected from 18 water treatment facilities in Florida. Total and leachable concentrations of the WTR were measured. To assess the potential for disposal of mixed WTR as clean fill below the water table, leaching tests were conducted at multiple liquid to solid ratios and under reducing conditions. The results were compared to risk-based soil and groundwater contamination thresholds. Total metal concentrations of WTR were found to be below Florida soil contaminant thresholds with Fe found in the highest abundance at a concentration of 3600 mg/kg-dry. Aluminum was the only element that exceeded the Florida groundwater contaminant thresholds using SPLP (95% UCL = 0.23 mg/L; risk threshold = 0.2 mg/L). Tests under reducing conditions showed elevated concentrations of Fe and Mn, ranging from 1 to 3 orders of magnitude higher than SPLP leachates. Mixed lime WTR concentrations (total and leachable) were lower than the ferric and alum WTR concentrations, supporting that mixed WTR are appropriately represented as lime WTR. Testing of WTR under reducing conditions demonstrated the potential for release of certain trace metals (Fe, Al, Mn) above applicable regulatory thresholds; additional evaluation is needed to assess management options where

  13. Field programmable chemistry: integrated chemical and electronic processing of informational molecules towards electronic chemical cells.

    PubMed

    Wagler, Patrick F; Tangen, Uwe; Maeke, Thomas; McCaskill, John S

    2012-07-01

    The topic addressed is that of combining self-constructing chemical systems with electronic computation to form unconventional embedded computation systems performing complex nano-scale chemical tasks autonomously. The hybrid route to complex programmable chemistry, and ultimately to artificial cells based on novel chemistry, requires a solution of the two-way massively parallel coupling problem between digital electronics and chemical systems. We present a chemical microprocessor technology and show how it can provide a generic programmable platform for complex molecular processing tasks in Field Programmable Chemistry, including steps towards the grand challenge of constructing the first electronic chemical cells. Field programmable chemistry employs a massively parallel field of electrodes, under the control of latched voltages, which are used to modulate chemical activity. We implement such a field programmable chemistry which links to chemistry in rather generic, two-phase microfluidic channel networks that are separated into weakly coupled domains. Electric fields, produced by the high-density array of electrodes embedded in the channel floors, are used to control the transport of chemicals across the hydrodynamic barriers separating domains. In the absence of electric fields, separate microfluidic domains are essentially independent with only slow diffusional interchange of chemicals. Electronic chemical cells, based on chemical microprocessors, exploit a spatially resolved sandwich structure in which the electronic and chemical systems are locally coupled through homogeneous fine-grained actuation and sensor networks and play symmetric and complementary roles. We describe how these systems are fabricated, experimentally test their basic functionality, simulate their potential (e.g. for feed forward digital electrophoretic (FFDE) separation) and outline the application to building electronic chemical cells. PMID:22309763

  14. Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

    SciTech Connect

    New, Joshua Ryan

    2014-01-01

    Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

  15. Effects of chemical mechanical planarization slurry additives on the agglomeration of alumina nanoparticles II: aggregation rate analysis.

    PubMed

    Brahma, Neil; Talbot, Jan B

    2014-04-01

    The aggregation rate and mechanism of 150 nm alumina particles in 1mM KNO3 with various additives used in chemical mechanical planarization of copper were investigated. The pH of each suspension was ∼8 such that the aggregation rate was slow enough to be measured and analyzed over ∼120 min. In general, an initial exponential growth was observed for most suspensions indicating reaction-limited aggregation. After aggregate sizes increase to >500 nm, the rate followed a power law suggesting diffusion-limited aggregation. Stability ratios and fractal dimension numbers were also calculated to further elucidate the aggregation mechanism. PMID:24491325

  16. 6 CFR 27.200 - Information regarding security risk for a chemical facility.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Information regarding security risk for a chemical facility. 27.200 Section 27.200 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY CHEMICAL FACILITY ANTI-TERRORISM STANDARDS Chemical Facility Security Program § 27.200...

  17. Using Patent Classification to Discover Chemical Information in a Free Patent Database: Challenges and Opportunities

    ERIC Educational Resources Information Center

    Ha¨rtinger, Stefan; Clarke, Nigel

    2016-01-01

    Developing skills for searching the patent literature is an essential element of chemical information literacy programs at the university level. The present article creates awareness of patents as a rich source of chemical information. Patent classification is introduced as a key-component in comprehensive search strategies. The free Espacenet…

  18. Sustainable nutrients recovery and recycling by optimizing the chemical addition sequence for struvite precipitation from raw swine slurries.

    PubMed

    Taddeo, Raffaele; Kolppo, Kari; Lepistö, Raghida

    2016-09-15

    Livestock farming contributes heavily to nitrogen (N) and phosphorus (P) flows into the environment, a major cause of eutrophication of coastal and freshwater systems. Furthermore, the growing demand for N-P fertilizers is increasing the emission of anthropogenic reactive N into the atmosphere and the depletion of the current P reserves. Therefore, it is essential to minimize the anthropogenic impact on the environment and recycle the wasted N-P for agricultural reuse. This study focused on enhancing struvite (MgNH4PO4*6H2O) precipitation from raw swine slurries in batch and laboratory-scale reactors. Different chemical addition sequences were evaluated, and the best removal efficiency (E%) was obtained when the chemicals were mixed before the precipitation process. Struvite was detected at a pH as low as 6 (E%N-P∼50%), and high E%N-P was found at pH 7-9.5 (80-95%). Furthermore, air stripping was used in place of NaOH to adjust pH, returning the same efficiency as if only alkali had been used. XRD and FE-SEM analysis of the precipitate showed that the recovered struvite was of high purity with orthorhombic crystalline structure and only trace amounts of impurities from matrix organics, co-precipitation products (CaO and amorphous calcium-phosphates), and residuals of added chemicals (MgO). PMID:27208994

  19. Sustainable nutrients recovery and recycling by optimizing the chemical addition sequence for struvite precipitation from raw swine slurries.

    PubMed

    Taddeo, Raffaele; Kolppo, Kari; Lepistö, Raghida

    2016-09-15

    Livestock farming contributes heavily to nitrogen (N) and phosphorus (P) flows into the environment, a major cause of eutrophication of coastal and freshwater systems. Furthermore, the growing demand for N-P fertilizers is increasing the emission of anthropogenic reactive N into the atmosphere and the depletion of the current P reserves. Therefore, it is essential to minimize the anthropogenic impact on the environment and recycle the wasted N-P for agricultural reuse. This study focused on enhancing struvite (MgNH4PO4*6H2O) precipitation from raw swine slurries in batch and laboratory-scale reactors. Different chemical addition sequences were evaluated, and the best removal efficiency (E%) was obtained when the chemicals were mixed before the precipitation process. Struvite was detected at a pH as low as 6 (E%N-P∼50%), and high E%N-P was found at pH 7-9.5 (80-95%). Furthermore, air stripping was used in place of NaOH to adjust pH, returning the same efficiency as if only alkali had been used. XRD and FE-SEM analysis of the precipitate showed that the recovered struvite was of high purity with orthorhombic crystalline structure and only trace amounts of impurities from matrix organics, co-precipitation products (CaO and amorphous calcium-phosphates), and residuals of added chemicals (MgO).

  20. 77 FR 48514 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-14

    ... 06/19/2012 09/16/2012 Hanwha International (S) Use as an additive (S) Multiwalled carbon for electro...) Multi-walled carbon for electro-static nanotubes (CM-100 discharge (ESD); Use as grade). an additive for... International (S) Use as an additive (S) Multi-walled carbon for electro-static nanotubes (CM-150 discharge...

  1. Optical disk toxic information online system at Sumitomo Chemical Co. through telecommunication network in Japan

    NASA Astrophysics Data System (ADS)

    Kishida, Fumio; Omodaka, Hisakata; Ishihara, Koichiro; Yamada, Yoshinori; Kato, Hiromi

    Toxicity data about several hundred chemicals, handled and commercialized by Sumitomo Chemical Co., have been collected and estimated. These data are stored in an optical disk filing system "sanfile 8500D". Because the system is mounted with a keyword input panel "Word selecter", information retrieval system is simplified but precised. Online system through telecommunication network is extended between Sumitomo Chemical's works, laboratories, and others. Image informations are mailed from installed facsimili in sanfile 8500D directly.

  2. 76 FR 21339 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-15

    ... dispersions P-11-0052......... 11/01/10 01/29/11 Piedmont Chemical Industries (S) Uv curable (S) Fatty acids... Forbo Adhesives, LLC (G) Hot melt (G) Polyester polyurethane urethane polymer purge. P-11-0056......... 11/03/10 01/31/11 CBI (S) Acylic resin (G) Aliphatic used in uv urethane curable inks and...

  3. 75 FR 60444 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-30

    ... lithium component, contained iron phosphate. use P-10-0546 09/09/10 12/07/10 CBI (G) Battery electrode (G) Modified lithium component, contained iron phosphate. use P-10-0547 09/09/10 12/07/10 CBI (G) Chemical...

  4. 77 FR 5096 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-01

    .... producing packaging films. P-12-0089 12/06/2011 03/04/2012 Brueggemann (G) Zinc is a (S) Process Chemical U...) Isocyanate crosslinker P-11-0591 12/02/2011 11/23/2011 (G) Ipdi modified polyester resin P-11-0622...

  5. Protein structural information derived from NMR chemical shift with the neural network program TALOS-N.

    PubMed

    Shen, Yang; Bax, Ad

    2015-01-01

    Chemical shifts are obtained at the first stage of any protein structural study by NMR spectroscopy. Chemical shifts are known to be impacted by a wide range of structural factors, and the artificial neural network based TALOS-N program has been trained to extract backbone and side-chain torsion angles from (1)H, (15)N, and (13)C shifts. The program is quite robust and typically yields backbone torsion angles for more than 90 % of the residues and side-chain χ 1 rotamer information for about half of these, in addition to reliably predicting secondary structure. The use of TALOS-N is illustrated for the protein DinI, and torsion angles obtained by TALOS-N analysis from the measured chemical shifts of its backbone and (13)C(β) nuclei are compared to those seen in a prior, experimentally determined structure. The program is also particularly useful for generating torsion angle restraints, which then can be used during standard NMR protein structure calculations.

  6. The effect of chemical additives on the synthesis of ethanol. Technical progress report 15, March 15, 1991--June 15, 1991

    SciTech Connect

    Chuang, S.S.C.; Pien, S.I.

    1991-06-01

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativeities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. CO insertion is known to be a key step to the formation of acetaldehyde and ethanol from CO hydrogenation. Reaction of ethylene with syngas is used as a probe to determine CO insertion capabilities of metal catalysts. During the sixth quarter of the project, the mechanism of CO insertion on Ni/SiO{sub 2} was investigated by in-situ infrared spectroscopy. Ni/SiO{sub 2}, a methanation catalyst, has been shown to exhibit CO insertion activity. In situ infrared studies of CO/H{sub 2} and C{sub 2}H{sub 4}/CO/H{sub 2} reactions show that the carbonylation of Ni/SiO{sub 2} to Ni(CO){sub 4} leads to an inhibition of methanation in CO hydrogenation but an enhancement of formation of propionaldehyde in C{sub 2}H{sub 4}/CO/H{sub 2} reaction. The results suggest that the sites for propionaldehyde formation is different from those for methanation.

  7. The Stepping Stone Approach to Teaching Chemical Information Skills

    ERIC Educational Resources Information Center

    Yeagley, Andrew A.; Porter, Sarah E. G.; Rhoten, Melissa C.; Topham, Benjamin J.

    2016-01-01

    Information literacy is of paramount importance to any successful research program. Information techniques and skills should be infused throughout a student's undergraduate curriculum rather than being the focus of a single course. To this end, we have created several courses, beginning in the first year, where students review current scientific…

  8. 75 FR 32760 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-09

    ...) Lubricant (G) Zinc alkyl additive dithiophosphate P-10-0359 04/30/10 07/28/10 CBI (S) Flame retardant (G...-hexene, polymer open, non-dispersive with 1-propene use as a plastics additive and in a printing... intermediate in phenol substituted bis- phenol manufacturing P-10-0362 04/30/10 07/28/10 CBI (G) Organic...

  9. 77 FR 52325 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-29

    .../2012 10/22/2012 Infigreen (S) Polyol for (G) Aromatic Polymers. use in polyester manufacturing.../2012 10/29/2012 CBI (G) Coating (G) Siloxanes additive. and silicones, substituted alkyl group... polyurethane adhesives. ] P-12-0485 08/01/2012 10/29/2012 CBI (G) Additive to (G) Oxirane, polyurethane...

  10. Exposure levels for chemical threat compounds: information to facilitate chemical incident response.

    PubMed

    Hauschild, Veronique D; Watson, Annetta

    2013-01-01

    Although not widely known, a robust set of peer-reviewed public health and occupational exposure levels presently exist for key chemical warfare agents (CWAs) and certain acutely toxic industrial chemicals (TICs) identified as terrorist attack threats. Familiarity with these CWA and TIC exposure levels and their historic applications has facilitated emergency management decision-making by public and environmental health decision-makers. Specifically, multiple air, soil, and water exposure levels for CWAs and TICs summarized here have been extensively peer-reviewed and published; many have been recognized and are in use by federal and state health agencies as criteria for hazard zone prediction and assessment, occupational safety, and "how clean is clean enough" decisions. The key, however, is to know which criteria are most appropriate for specific decisions. While public safety is critical, high levels of concern often associated with perceived or actual proximity to extremely toxic chemical agents could result in overly cautious decisions that generate excessive delays, expenditure of scarce resources, and technological difficulties. Rapid selection of the most appropriate chemical exposure criteria is recommended to avoid such problems and expedite all phases of chemical incident response and recovery. PMID:24340456

  11. Haz-Map: Information on Hazardous Chemicals and Occupational Diseases

    MedlinePlus

    ... Occupational Diseases High Risk Jobs Non-Occupational Activities Industries Job Tasks Processes Symptoms/Findings Customer Service: tehip@teh.nlm.nih.gov Specialized Information Services U.S.National Library of Medicine, 8600 Rockville Pike, Bethesda, MD 20894 ...

  12. Systematics of the family Plectopylidae in Vietnam with additional information on Chinese taxa (Gastropoda, Pulmonata, Stylommatophora)

    PubMed Central

    Páll-Gergely, Barna; Hunyadi, András; Ablett, Jonathan; Lương, Hào Văn; Fred Naggs; Asami, Takahiro

    2015-01-01

    Abstract Vietnamese species from the family Plectopylidae are revised based on the type specimens of all known taxa, more than 600 historical non-type museum lots, and almost 200 newly-collected samples. Altogether more than 7000 specimens were investigated. The revision has revealed that species diversity of the Vietnamese Plectopylidae was previously overestimated. Overall, thirteen species names (anterides Gude, 1909, bavayi Gude, 1901, congesta Gude, 1898, fallax Gude, 1909, gouldingi Gude, 1909, hirsuta Möllendorff, 1901, jovia Mabille, 1887, moellendorffi Gude, 1901, persimilis Gude, 1901, pilsbryana Gude, 1901, soror Gude, 1908, tenuis Gude, 1901, verecunda Gude, 1909) were synonymised with other species. In addition to these, Gudeodiscus hemmeni sp. n. and Gudeodiscus messageri raheemi ssp. n. are described from north-western Vietnam. Sixteen species and two subspecies are recognized from Vietnam. The reproductive anatomy of eight taxa is described. Based on anatomical information, Halongella gen. n. is erected to include Plectopylis schlumbergeri and Plectopylis fruhstorferi. Additionally, the genus Gudeodiscus is subdivided into two subgenera (Gudeodiscus and Veludiscus subgen. n.) on the basis of the morphology of the reproductive anatomy and the radula. The Chinese Gudeodiscus phlyarius werneri Páll-Gergely, 2013 is moved to synonymy of Gudeodiscus phlyarius. A spermatophore was found in the organ situated next to the gametolytic sac in one specimen. This suggests that this organ in the Plectopylidae is a diverticulum. Statistically significant evidence is presented for the presence of calcareous hook-like granules inside the penis being associated with the absence of embryos in the uterus in four genera. This suggests that these probably play a role in mating periods before disappearing when embryos develop. Sicradiscus mansuyi is reported from China for the first time. PMID:25632253

  13. Chemical characteristics of beddings for swine: effects of bedding depths and of addition of inoculums in a pilot-scale.

    PubMed

    Corrêa, E K; Corezzolla, J L; Corrêa, M N; Bianchi, I; Gil-Turnes, C; Lucia, T

    2012-11-01

    The effect of depths and of addition of inoculums on the chemical content of swine beddings was evaluated. For beddings 0.25m (25D) and 0.50m (50D) deep, three treatments were tested in two repeats with the same beddings: control (no inoculums); T1 (250g of Bacillus cereus var. toyoii at 8.4×10(7)CFU/g); and T2 (250g of a pool of Bacillus sp. at 8.4×10(7)CFU/g) (250g for 25D and 500g for 50D). For 25D, the C:N ratio was lower, but N, K and C contents were greater than for 50D (P<0.05). The inoculums did not benefit any chemical parameter (P>0.05). In the second repeat, beddings presented lower C:N ratio and greater N, P and K contents than in the first repeat (P<0.05). Thus, the compost produced after using 25D twice had greater fertilizer value than that of 50D.

  14. Characteristics of concentration-inhibition curves of individual chemicals and applicability of the concentration addition model for mixture toxicity prediction.

    PubMed

    Wang, Na; Wang, Xiaochang C; Ma, Xiaoyan

    2015-03-01

    The concentration addition (CA) model has been widely applied to predict mixture toxicity. However, its applicability is difficult to evaluate due to the complexity of interactions among substances. Considering that the concentration-response curve (CRC) of each component of the mixture is closely related to the prediction of mixture toxicity, mathematical treatments were used to derive a characteristic index kECx (k was the slope of the tangent line of a CRC at concentration ECx). The implication is that the CA model would be applicable for predicting the mixture toxicity only when chemical components have similar kECx in the whole or part of the concentration range. For five selected chemicals whose toxicity was detected using luminescent bacteria, sodium dodecyl benzene sulfonate (SDBS) showed much higher kECx values than the others and its existence in the binary mixtures brought about overestimation of the mixture toxicity with the CA model. The higher the mass ratio of SDBS in a multi-mixture was, the more the toxicity prediction deviated from measurements. By applying the method proposed in this study to analyze some published data, it is confirmed that some components having significantly different kECx values from the other components could explain the large deviation of the mixture toxicity predicted by the CA model. PMID:25499050

  15. 78 FR 35904 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-14

    ... Recycling & (S) Feed stock... (S) Tires, waste, Processing, LLC. pyrolyzed, carbon black fraction. P-13-0352...) Polyphosphoric conglomeration acids, esters with additive for substituted amines, down-hole compounds with...

  16. Lateralization of High-Frequency Clicks Based on Interaural Time: Additivity of Information across Frequency

    NASA Astrophysics Data System (ADS)

    Wenzel, Elizabeth Marie

    Lateralization performance based on interaural differences of time (IDTs) was measured for trains of Gaussian clicks which varied in spectral content. In the first experiment, thresholds ((DELTA)IDTs) were measured as a function of the number of clicks in the train (n = 1 to 32), the interclick interval (ICI = 2.5 or 5 ms), and the spectral content (1 vs. 2 or 4 carriers). Subjects' performance was compared to perfect statistical summation which predicts slopes of -.50 when log-(DELTA)IDT vs. long -n is plotted. The results showed that increasing the spectral content of the clicks decreased the intercepts of the log -log functions (decreased thresholds) while having little effect on their slopes. Shortening the ICIs caused the slopes of the functions to decrease in absolute value. To estimate the bandwidth of frequency-interaction in lateralization, d's were measured for clicks with constant IDTs (n = 1) with a fixed carrier (FF = 4000, 5200, 6000 or 7200 Hz), both alone and combined with a second click whose carrier (F) varied from 3500 to 8500 Hz. Performance in combined conditions was compared to independent summation of the information carried by the two frequency-bands. Performance improved as the separation between F and FF increased until the level predicted by independence was reached. The final experiment investigated the interaction of frequency content with IDT. d's were measured as a function of the IDT in clicks with carriers of 5200, 6000 or 7200 Hz, both alone and combined with a 4000-Hz click with a fixed IDT. Performance in combined conditions was again compared to independent additivity. The improvement with frequency was explained by an increase in the number of samples of the IDT reaching the binaural centers due to spread of excitation along the basilar membrane. Less than independent summation was explained by correlation between overlapping bands which reduced the amount of information exciting independent channels. The data also suggest that

  17. Additive effects on the androgen signaling pathway by chemicals with different modes of action-COW2015

    EPA Science Inventory

    Risk assessments have traditionally been developed on a chemical-by-chemical basis. However, regulatory agencies recently have been considering cumulative effects of chemicals that act via a common mechanism of toxicity. Here we present data on several mixture studies of chemic...

  18. Fermentation quality and chemical composition of shrub silage treated with lactic acid bacteria inoculants and cellulase additives.

    PubMed

    Sun, Qizhong; Gao, Fengqin; Yu, Zhu; Tao, Ya; Zhao, Shufen; Cai, Yimin

    2012-04-01

    Effects of lactic acid bacteria (LAB) inoculants and cellulase additives on fermentation quality and chemical compositions of shrub silages were studied by using a small-scale fermentation system. Two LAB inoculants of Qingbao (Lactobacillus plantarum, Pediococcus acidilacticii, Lactobacillus casei and Clostridium phage) and Caihe (Lactobacillus plantarum, Lactobacillus brevis and Pediococcus acidilactici) and a commercial cellulase made from Trichoderma reesei were used as additives for intermediate pea-shrub, rush bushclover, arborescent ceratoides and shrubby silage preparation. The crude protein, neutral detergent fiber and water-soluble carbohydrate contents of the four shrub materials were 10.1-14.2, 62.6-67.2 and 1.9-3.5% on a dry matter basis, respectively. All shrub silages had pH 3.40-4.43, ammonia-N 0.1-0.2% g/kg and lactic acid 1.3-2.9% on a fresh matter basis. The silage quality of LAB-inoculated silages did not have a greater effect than control silages, except shrubby silage preparation. Silages treated with the cellulase, the pH of rush bushclover and shrubby sweetvetch silage were significantly (P < 0.05) lower and the lactic acid content were significantly (P < 0.05) higher than the control silages. The results confirmed that shrub contained a relatively high content of crude protein; its silages can be preserved in good quality, and they are new potential resources for livestock feed. PMID:22515690

  19. 75 FR 39520 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-09

    ... manufacturing copper indium metal selenide solar panel. The finished solar panel with copper indium metal selenide deposited on the substrate is encapsulated with the complete solar panel unit. The solar panel is... provide any technical information and/or data that you used. v. If you estimate potential costs or...

  20. 76 FR 61692 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-05

    ...:2) . P-11-0613 8/30/2011 11/27/2011 CBI (G) Biodiesel (G) Vinyl and crude fuel polymer grafted additive. alkyl methacrylate. P-11-0614 8/30/2011 11/27/2011 CBI (G) Biodiesel (G) Vinyl and crude...

  1. 75 FR 11403 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-10

    ...) Liquid dispersion : Contained use P-10-0108 12/10/09 03/09/10 CBI (S) Antioxidant for (G) Thioether plastic articles antioxidant P-10-0109 12/08/09 03/07/10 CBI (G) Coating additive (G) Urethane...

  2. 77 FR 32965 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-04

    ... (1:1), sodium salt hydrogen peroxide- and peroxydisulfuric acid ([HO--s(O)2 [2O2-- sodium salt (1:2... and additive. maleic anhydride, sodium peroxide and peroxy disulfuric acid (1(HO)s(O)2]2O2) sodium.../15/2012 CBI (G) Paint and/or (G) Alkenoic acid, inks. polymer with alkyl acrylate,...

  3. 77 FR 22780 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-17

    ..., sodium salt, hydrogen peroxide- and peroxydisulfuric acid ( 2O2) sodium salt (1:2)-initiated. P-12-0218... anhydride, maltodextrin, and methacrylic acid, ammonium salt, hydrogen peroxide- and peroxydisulfuric acid... additive. with acrylic acid and maleic anhydride, maltodextrin and methacrylic acid, sodium salt,...

  4. 77 FR 40033 - Certain New Chemicals; Receipt and Status Information

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-06

    ... raw material salicylic acid. for industry. P-12-0353 05/15/2012 08/12/2012 CBI (S) Extrusion (G... CBI (G) Coating (G) Acid anhydride, additive. polymer with aromatic isocyanate and polyalkyleneglycol...) Dispersant (G) Octadecanoic for ink acid, 12-hydroxy-, formulations. polymer with formaldehyde-...

  5. Electrochemical Probing through a Redox Capacitor To Acquire Chemical Information on Biothiols.

    PubMed

    Liu, Zhengchun; Liu, Yi; Kim, Eunkyoung; Bentley, William E; Payne, Gregory F

    2016-07-19

    The acquisition of chemical information is a critical need for medical diagnostics, food/environmental monitoring, and national security. Here, we report an electrochemical information processing approach that integrates (i) complex electrical inputs/outputs, (ii) mediators to transduce the electrical I/O into redox signals that can actively probe the chemical environment, and (iii) a redox capacitor that manipulates signals for information extraction. We demonstrate the capabilities of this chemical information processing strategy using biothiols because of the emerging importance of these molecules in medicine and because their distinct chemical properties allow evaluation of hypothesis-driven information probing. We show that input sequences can be tailored to probe for chemical information both qualitatively (step inputs probe for thiol-specific signatures) and quantitatively. Specifically, we observed picomolar limits of detection and linear responses to concentrations over 5 orders of magnitude (1 pM-0.1 μM). This approach allows the capabilities of signal processing to be extended for rapid, robust, and on-site analysis of chemical information.

  6. IMPROVING THE ENVIRONMENTAL PERFORMANCE OF CHEMICAL PROCESSES THROUGH THE USE OF INFORMATION TECHNOLOGY

    EPA Science Inventory

    Efforts are currently underway at the USEPA to develop information technology applications to improve the environmental performance of the chemical process industry. These efforts include the use of genetic algorithms to optimize different process options for minimal environmenta...

  7. 40 CFR 711.5 - Chemical substances for which information must be reported.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Chemical substances for which information must be reported. 711.5 Section 711.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT TSCA CHEMICAL DATA REPORTING REQUIREMENTS § 711.5...

  8. Information resources for assessing health effects from chemical exposure: Office of pesticides programs

    SciTech Connect

    Fenner-Crisp, P.

    1990-12-31

    The US Environmental Protection Agency (EPA) Office of Pesticide Programs is trying to develop a complete picture of a chemical`s toxicity and exposure profile. It is also important to share information in the office`s files because of pesticides, particularly as a consequence of agricultural use, find their way into places not necessarily intended.

  9. Transfer of the EPA/NIH Chemical Information System (CIS) to Private Management.

    ERIC Educational Resources Information Center

    Kadec, Sarah T.; Jover, Antonio

    This paper discusses the programmatic concerns, the evaluation, and the ultimate decisions which led to the transfer of CIS (Chemical Information System) to the private sector. CIS is a complex, integrated system of some 20 chemical databases and data analysis programs which provide access to physical, toxicological, environmental effects, and…

  10. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... fuel additive will be sold, offered for sale, or introduced into commerce, and the fuel additive manufacturer's recommended range of concentration and purpose-in-use for each such type of fuel. (e) Such other... (e) of this section as provided in § 79.5(b). (g) Assurances that the additive manufacturer will...

  11. Endocrine disrupting chemicals (EDCs) and female cancer: Informing the patients.

    PubMed

    Rachoń, Dominik

    2015-12-01

    Breast and uterine cancer are the most frequent female gender related neoplasms whose growth is mostly estrogen dependent. Therefore, any EDC exhibiting estrogenic effects may increase the risk of these two malignancies. This review focuses on the potential role of EDCs with estrogenic potential on the risk of breast and uterine neoplasms but also points to the possible role of the exposure to EDCs in the pathogenesis of ovarian and cervical cancer. It also underlines the necessity of informing the public about the presence of EDCs in common consumer products, their detrimental health effects and methods of reducing the exposure risk.

  12. 41 CFR 102-75.140 - In addition to the title report, and all necessary environmental information and certifications...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 102-75.140 Public Contracts and Property Management Federal Property Management Regulations System... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false In addition to the title report, and all necessary environmental information and certifications, what information must...

  13. Infochemistry and infofuses for the chemical storage and transmission of coded information

    PubMed Central

    Thomas, Samuel W.; Chiechi, Ryan C.; LaFratta, Christopher N.; Webb, Michael R.; Lee, Andrew; Wiley, Benjamin J.; Zakin, Mitchell R.; Walt, David R.; Whitesides, George M.

    2009-01-01

    This article describes a self-powered system that uses chemical reactions—the thermal excitation of alkali metals—to transmit coded alphanumeric information. The transmitter (an “infofuse”) is a strip of the flammable polymer nitrocellulose patterned with alkali metal ions; this pattern encodes the information. The wavelengths of 2 consecutive pulses of light represent each alphanumeric character. While burning, infofuses transmit a sequence of pulses (at 5–20 Hz) of atomic emission that correspond to the sequence of metallic salts (and therefore to the encoded information). This system combines information technology and chemical reactions into a new area—“infochemistry”—that is the first step toward systems that combine sensing and transduction of chemical signals with multicolor transmission of alphanumeric information. PMID:19470465

  14. 41 CFR 102-79.111 - Where may Executive agencies find additional information on Integrated Workplace concepts?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Where may Executive agencies find additional information on Integrated Workplace concepts? 102-79.111 Section 102-79.111 Public... Integrated Workplace concepts? The GSA Office of Governmentwide Policy provides additional guidance in...

  15. Equity and Information: Information Regulation, Environmental Justice, and Risks from Toxic Chemicals

    ERIC Educational Resources Information Center

    Shapiro, Marc D.

    2005-01-01

    Decreases over time in pounds of industrial chemical emissions have led to concerns that nonminority, higher-income communities have benefited disproportionately in reductions in risk. Toxic chemical release data, modeled for toxicity and dispersion in square kilometer units across 45 states, are used to test six sets of hypotheses of potential…

  16. Effect of several additives and their admixtures on the physico-chemical properties of a calcium phosphate cement.

    PubMed

    Bohner, M; Merkle, H P; Landuyt, P V; Trophardy, G; Lemaitre, J

    2000-02-01

    Combinations of citrate (C6H5O(7)3-), pyrophosphate (P2O(7)4-) and sulfate (SO(4)2-) ions were used to modify the physico-chemical properties of a calcium phosphate cement (CPC) composed of beta-tricalcium phosphate (beta-TCP) and phosphoric acid (PA) solution. The results obtained with only one additive at a time are similar to those previously published. New facts are: the positive effect of C6H5O(7)3- ions on cement failure strain and their negative effect on cement pH. The position of the setting time maximum measured at an SO(4)2- concentration of 0.09 M was not displaced by the addition of C6H5O(7)3- and P2O(7)4- ions. However, the effect of SO(4)2- ions on the setting time was depressed by C6H5O(7)3- ions. Moreover, no increase in tensile strength was observed when increasing amounts of SO(4)2- were added into a C6H5O(7)3--containing cement. The latter results suggest a competitive effect of C6H5O(7)3- and SO(4)2- on setting time and tensile strength. Anhydrous dicalcium phosphate (DCP; CaHPO4) appeared in cement samples dried just after setting, but not in cement samples incubated for 24 h in deionized water before the drying step. It is believed that the setting reaction is stopped by the drying step, leaving a low internal pH in the sample, hence providing favorable conditions for the transformation of dicalcium phosphate dihydrate (DCPD) into DCP. Interestingly, even though C6H5O(7)3- ions dramatically lowered the equilibrium pH of the cement with 5 ml of deionized water, they still prevented the occurrence of the transformation of DCPD into DCP.

  17. WHEN ISOTOPES AREN'T ENOUGH: ADDITIONAL INFORMATION TO CONSTRAIN MIXING PROBLEMS

    EPA Science Inventory

    Stable isotopes are often used as chemical tracers to determine the relative contributions of sources to a mixture. Ecological examples include partitioning pollution sources to air or water bodies, trophic links in food webs, plant water use from different soil horizons, source...

  18. WHEN ISOTOPES AREN'T ENOUGH: USING ADDITIONAL INFORMATION TO CONSTRAIN MIXING PROBLEMS

    EPA Science Inventory

    Stable isotopes are often used as chemical tracers to determine the relative contributions of sources to a mixture. Ecological examples include partitioning pollution sources to air or water bodies, trophic links in food webs, plant water use from different soil horizons, source...

  19. Does the anti-prothrombin antibodies measurement provide additional information in patients with thrombosis?

    PubMed

    Bardin, Nathalie; Alessi, Marie Christine; Dignat-George, Francoise; Vague, Irene Juhan; Sampol, Jose; Harlé, Jean Robert; Sanmarco, Marielle

    2007-01-01

    The aim of this study is to get new insight into the relevance of IgG anti-prothrombin antibodies in patients with thrombosis and to determine whether human prothrombin alone (aPT) or complexed to phosphatidylserine (aPS/PT) should be preferentially used for measuring these antibodies by enzyme-linked immunosorbent assay (ELISA). To this end, prevalence of anti-prothrombin antibodies, their characteristics in terms of avidity and heterogeneity, and their relationship with anti-beta2 glycoprotein I antibodies (abeta2GPI) were studied in 152 patients with thrombosis. Patients were divided into two groups according to the presence or absence of antiphospholipid antibodies (aPL), called aPL+ or aPL-, respectively. In the aPL- group (n=90), the prevalence of anti-prothrombin antibodies was substantial (10%) but not significantly different from that of control (5%). In the aPL+ group (n=62), lupus anticoagulant (LA) or anticardiolipin antibodies (aCL) positive, 61% were positive for anti-prothrombin antibodies with no statistical difference between aPT and aPS/PT prevalence (42% vs. 55%, respectively). In the whole thrombotic population, 19% were only aPT and 34% only aPS/PT suggesting the presence of different antibodies. Absorption experiments confirmed the heterogeneity of aPT and aPS/PT. No difference in their avidity was demonstrated. From the aPL+ group, 60 were LA positive. Among them, 18% were negative for abeta2GPI and anti-prothrombin antibodies showing that the detection of these antibodies could not substitute for LA determination. In conclusion, our data show that the screening of the different anti-prothrombin antibodies is not warranted in the aPL+ group since these antibodies do not provide additional information compared to aCL, LA and/or abeta2GPI measurement. Nevertheless, the substantial prevalence of anti-prothrombin antibodies in the aPL- group should be further explored in a large prospective study. PMID:17678713

  20. CMR Quantification of Myocardial Scar Provides Additive Prognostic Information in Nonischemic Cardiomyopathy

    PubMed Central

    Neilan, Tomas G.; Coelho-Filho, Otavio R.; Danik, Stephan B.; Shah, Ravi V.; Dodson, John A.; Verdini, Daniel J.; Tokuda, Michifumi; Daly, Caroline A.; Tedrow, Usha B.; Stevenson, William G.; Jerosch-Herold, Michael; Ghoshhajra, Brian B.; Kwong, Raymond Y.

    2014-01-01

    OBJECTIVES This study sought to determine whether the extent of late gadolinium enhancement (LGE) can provide additive prognostic information in patients with a nonischemic dilated cardiomyopathy (NIDC) with an indication for implantable cardioverter-defibrillator (ICD) therapy for the primary prevention of sudden cardiac death (SCD). BACKGROUND Data suggest that the presence of LGE is a strong discriminator of events in patients with NIDC. Limited data exist on the role of LGE quantification. METHODS The extent of LGE and clinical follow-up were assessed in 162 patients with NIDC prior to ICD insertion for primary prevention of SCD. LGE extent was quantified using both the standard deviation–based (2-SD) method and the full-width half-maximum (FWHM) method. RESULTS We studied 162 patients with NIDC (65% male; mean age: 55 years; left ventricular ejection fraction [LVEF]: 26 ± 8%) and followed up for major adverse cardiac events (MACE), including cardiovascular death and appropriate ICD therapy, for a mean of 29 ± 18 months. Annual MACE rates were substantially higher in patients with LGE (24%) than in those without LGE (2%). By univariate association, the presence and the extent of LGE demonstrated the strongest associations with MACE (LGE presence, hazard ratio [HR]: 14.5 [95% confidence interval (CI): 6.1 to 32.6; p < 0.001]; LGE extent, HR: 1.15 per 1% increase in volume of LGE [95% CI: 1.12 to 1.18; p < 0.0001]). Multivariate analyses showed that LGE extent was the strongest predictor in the best overall model for MACE, and a 7-fold hazard was observed per 10% LGE extent after adjustments for patient age, sex, and LVEF (adjusted HR: 7.61; p < 0.0001). LGE quantitation by 2-SD and FWHM both demonstrated robust prognostic association, with the highest MACE rate observed in patients with LGE involving >6.1% of LV myocardium. CONCLUSIONS LGE extent may provide further risk stratification in patients with NIDC with a current indication for ICD implantation for

  1. Effect of an iodine-containing additive on the composition, structure, and morphology of chemically deposited lead selenide films

    NASA Astrophysics Data System (ADS)

    Smirnova, Z. I.; Bakanov, V. M.; Maskaeva, L. N.; Markov, V. F.; Voronin, V. I.

    2014-12-01

    The effect of an ammonium iodide additive on the elemental and phase compositions, structural parameters, and surface morphology of lead selenide films synthesized by chemical deposition from aqueous solutions has been studied using X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray analysis. It has been established that the obtained PbSe films have a multiphase structure. The iodine content of the films is directly proportional to the NH4I concentration in the reaction mixture and increases linearly with an increase in this concentration to 0.25 mol/L. No individual iodine-containing phases have been detected in the film structure. However, the introduction of iodine leads to an increase in the PbSe phase lattice parameter from ˜6.11 to ˜6.16 Å and to a decrease in the crystal grain size to ˜ 20 nm. It has been found that there is a correlation between the grain size, lattice parameter, and ammonium iodide concentration in the reaction mixture, which can be explained by changes in the film growth mechanism at the initial growth steps.

  2. 14 CFR 121.317 - Passenger information requirements, smoking prohibitions, and additional seat belt requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Passenger information requirements, smoking... OPERATIONS Instrument and Equipment Requirements § 121.317 Passenger information requirements, smoking... command. (c) No person may operate an airplane on a flight on which smoking is prohibited by part 252...

  3. 14 CFR 121.317 - Passenger information requirements, smoking prohibitions, and additional seat belt requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Passenger information requirements, smoking... OPERATIONS Instrument and Equipment Requirements § 121.317 Passenger information requirements, smoking... command. (c) No person may operate an airplane on a flight on which smoking is prohibited by part 252...

  4. 14 CFR 121.317 - Passenger information requirements, smoking prohibitions, and additional seat belt requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Passenger information requirements, smoking... OPERATIONS Instrument and Equipment Requirements § 121.317 Passenger information requirements, smoking... command. (c) No person may operate an airplane on a flight on which smoking is prohibited by part 252...

  5. 14 CFR 121.317 - Passenger information requirements, smoking prohibitions, and additional seat belt requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Passenger information requirements, smoking... OPERATIONS Instrument and Equipment Requirements § 121.317 Passenger information requirements, smoking... command. (c) No person may operate an airplane on a flight on which smoking is prohibited by part 252...

  6. 14 CFR 121.317 - Passenger information requirements, smoking prohibitions, and additional seat belt requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Passenger information requirements, smoking... OPERATIONS Instrument and Equipment Requirements § 121.317 Passenger information requirements, smoking... command. (c) No person may operate an airplane on a flight on which smoking is prohibited by part 252...

  7. The effect of chemical additives on the synthesis of ethanol. Technical progress report No. 4, June 16, 1988--September 15, 1988

    SciTech Connect

    Chuang, S.S.C.

    1988-11-14

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies including temperature programmed desorption, infrared study of NO adsorption, reactive probing, steady state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow us to use chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas.

  8. The effect of chemical additives on the synthesis of ethanol. Technical progress report No. 11, March 16, 1990--June 15, 1990

    SciTech Connect

    Chuang, S.S.C.

    1990-07-01

    The objective of this research is to elucidate the role of various chemical additives on ethanol synthesis over Rh- and Ni-based catalysts. Chemical additives used for this study will include S, P, Ag, Cu, Mn, and Na which have different electronegativities. The effect of additives on the surface state of the catalysts, heat of adsorption of reactant molecules, reaction intermediates, reaction pathways, reaction kinetics, and product distributions is/will be investigated by a series of experimental studies of NO adsorption, reaction probing, study state rate measurement, and transient kinetic study. A better understanding of the role of additive on the synthesis reaction may allow us to sue chemical additives to manipulate the catalytic properties of Rh- and Ni-based catalysts for producing high yields of ethanol from syngas. (VC)

  9. PUG-SOAP and PUG-REST: web services for programmatic access to chemical information in PubChem.

    PubMed

    Kim, Sunghwan; Thiessen, Paul A; Bolton, Evan E; Bryant, Stephen H

    2015-07-01

    PubChem (http://pubchem.ncbi.nlm.nih.gov) is a public repository for information on chemical substances and their biological activities, developed and maintained by the US National Institutes of Health (NIH). PubChem contains more than 180 million depositor-provided chemical substance descriptions, 60 million unique chemical structures and 225 million bioactivity assay results, covering more than 9000 unique protein target sequences. As an information resource for the chemical biology research community, it routinely receives more than 1 million requests per day from an estimated more than 1 million unique users per month. Programmatic access to this vast amount of data is provided by several different systems, including the US National Center for Biotechnology Information (NCBI)'s Entrez Utilities (E-Utilities or E-Utils) and the PubChem Power User Gateway (PUG)-a common gateway interface (CGI) that exchanges data through eXtended Markup Language (XML). Further simplifying programmatic access, PubChem provides two additional general purpose web services: PUG-SOAP, which uses the simple object access protocol (SOAP) and PUG-REST, which is a Representational State Transfer (REST)-style interface. These interfaces can be harnessed in combination to access the data contained in PubChem, which is integrated with the more than thirty databases available within the NCBI Entrez system.

  10. PUG-SOAP and PUG-REST: web services for programmatic access to chemical information in PubChem.

    PubMed

    Kim, Sunghwan; Thiessen, Paul A; Bolton, Evan E; Bryant, Stephen H

    2015-07-01

    PubChem (http://pubchem.ncbi.nlm.nih.gov) is a public repository for information on chemical substances and their biological activities, developed and maintained by the US National Institutes of Health (NIH). PubChem contains more than 180 million depositor-provided chemical substance descriptions, 60 million unique chemical structures and 225 million bioactivity assay results, covering more than 9000 unique protein target sequences. As an information resource for the chemical biology research community, it routinely receives more than 1 million requests per day from an estimated more than 1 million unique users per month. Programmatic access to this vast amount of data is provided by several different systems, including the US National Center for Biotechnology Information (NCBI)'s Entrez Utilities (E-Utilities or E-Utils) and the PubChem Power User Gateway (PUG)-a common gateway interface (CGI) that exchanges data through eXtended Markup Language (XML). Further simplifying programmatic access, PubChem provides two additional general purpose web services: PUG-SOAP, which uses the simple object access protocol (SOAP) and PUG-REST, which is a Representational State Transfer (REST)-style interface. These interfaces can be harnessed in combination to access the data contained in PubChem, which is integrated with the more than thirty databases available within the NCBI Entrez system. PMID:25934803

  11. Students' Chemical Information Project, October 1967 - September 1968. Final Report: Part II.

    ERIC Educational Resources Information Center

    Callaghan, A.; And Others

    Part II of the Students' Chemical Information Project (SCIP), designed to spread the use of computer-based information services among research scientists and technologists, contains details of the project operations, statistics, results of questionnaires and research reports from liaison scientists (See LI 002 562 for Part I). Chapter I: Operation…

  12. 78 FR 27936 - Request for Extension and Revision of a Currently Approved Information Collection With Additional...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF AGRICULTURE Agricultural Marketing Service Request for Extension and Revision of a Currently Approved Information... of Fresh and Processed Fruits, Vegetables and Other Products AGENCY: Agricultural Marketing...

  13. Variable Temperature Stress in the Nematode Caenorhabditis elegans (Maupas) and Its Implications for Sensitivity to an Additional Chemical Stressor.

    PubMed

    Cedergreen, Nina; Nørhave, Nils Jakob; Svendsen, Claus; Spurgeon, David J

    2016-01-01

    A wealth of studies has investigated how chemical sensitivity is affected by temperature, however, almost always under different constant rather than more realistic fluctuating regimes. Here we compared how the nematode Caenorhabditis elegans responds to copper at constant temperatures (8-24°C) and under fluctuation conditions of low (±4°C) and high (±8°C) amplitude (averages of 12, 16, 20°C and 16°C respectively). The DEBkiss model was used to interpret effects on energy budgets. Increasing constant temperature from 12-24°C reduced time to first egg, life-span and population growth rates consistent with temperature driven metabolic rate change. Responses at 8°C did not, however, accord with this pattern (including a deviation from the Temperature Size Rule), identifying a cold stress effect. High amplitude variation and low amplitude variation around a mean temperature of 12°C impacted reproduction and body size compared to nematodes kept at the matching average constant temperatures. Copper exposure affected reproduction, body size and life-span and consequently population growth. Sensitivity to copper (EC50 values), was similar at intermediate temperatures (12, 16, 20°C) and higher at 24°C and especially the innately stressful 8°C condition. Temperature variation did not increase copper sensitivity. Indeed under variable conditions including time at the stressful 8°C condition, sensitivity was reduced. DEBkiss identified increased maintenance costs and increased assimilation as possible mechanisms for cold and higher copper concentration effects. Model analysis of combined variable temperature effects, however, demonstrated no additional joint stressor response. Hence, concerns that exposure to temperature fluctuations may sensitise species to co-stressor effects seem unfounded in this case.

  14. Variable Temperature Stress in the Nematode Caenorhabditis elegans (Maupas) and Its Implications for Sensitivity to an Additional Chemical Stressor.

    PubMed

    Cedergreen, Nina; Nørhave, Nils Jakob; Svendsen, Claus; Spurgeon, David J

    2016-01-01

    A wealth of studies has investigated how chemical sensitivity is affected by temperature, however, almost always under different constant rather than more realistic fluctuating regimes. Here we compared how the nematode Caenorhabditis elegans responds to copper at constant temperatures (8-24°C) and under fluctuation conditions of low (±4°C) and high (±8°C) amplitude (averages of 12, 16, 20°C and 16°C respectively). The DEBkiss model was used to interpret effects on energy budgets. Increasing constant temperature from 12-24°C reduced time to first egg, life-span and population growth rates consistent with temperature driven metabolic rate change. Responses at 8°C did not, however, accord with this pattern (including a deviation from the Temperature Size Rule), identifying a cold stress effect. High amplitude variation and low amplitude variation around a mean temperature of 12°C impacted reproduction and body size compared to nematodes kept at the matching average constant temperatures. Copper exposure affected reproduction, body size and life-span and consequently population growth. Sensitivity to copper (EC50 values), was similar at intermediate temperatures (12, 16, 20°C) and higher at 24°C and especially the innately stressful 8°C condition. Temperature variation did not increase copper sensitivity. Indeed under variable conditions including time at the stressful 8°C condition, sensitivity was reduced. DEBkiss identified increased maintenance costs and increased assimilation as possible mechanisms for cold and higher copper concentration effects. Model analysis of combined variable temperature effects, however, demonstrated no additional joint stressor response. Hence, concerns that exposure to temperature fluctuations may sensitise species to co-stressor effects seem unfounded in this case. PMID:26784453

  15. Variable Temperature Stress in the Nematode Caenorhabditis elegans (Maupas) and Its Implications for Sensitivity to an Additional Chemical Stressor

    PubMed Central

    Svendsen, Claus; Spurgeon, David J.

    2016-01-01

    A wealth of studies has investigated how chemical sensitivity is affected by temperature, however, almost always under different constant rather than more realistic fluctuating regimes. Here we compared how the nematode Caenorhabditis elegans responds to copper at constant temperatures (8–24°C) and under fluctuation conditions of low (±4°C) and high (±8°C) amplitude (averages of 12, 16, 20°C and 16°C respectively). The DEBkiss model was used to interpret effects on energy budgets. Increasing constant temperature from 12–24°C reduced time to first egg, life-span and population growth rates consistent with temperature driven metabolic rate change. Responses at 8°C did not, however, accord with this pattern (including a deviation from the Temperature Size Rule), identifying a cold stress effect. High amplitude variation and low amplitude variation around a mean temperature of 12°C impacted reproduction and body size compared to nematodes kept at the matching average constant temperatures. Copper exposure affected reproduction, body size and life-span and consequently population growth. Sensitivity to copper (EC50 values), was similar at intermediate temperatures (12, 16, 20°C) and higher at 24°C and especially the innately stressful 8°C condition. Temperature variation did not increase copper sensitivity. Indeed under variable conditions including time at the stressful 8°C condition, sensitivity was reduced. DEBkiss identified increased maintenance costs and increased assimilation as possible mechanisms for cold and higher copper concentration effects. Model analysis of combined variable temperature effects, however, demonstrated no additional joint stressor response. Hence, concerns that exposure to temperature fluctuations may sensitise species to co-stressor effects seem unfounded in this case. PMID:26784453

  16. Particle size distribution and chemical composition of total mixed rations for dairy cattle: water addition and feed sampling effects.

    PubMed

    Arzola-Alvarez, C; Bocanegra-Viezca, J A; Murphy, M R; Salinas-Chavira, J; Corral-Luna, A; Romanos, A; Ruíz-Barrera, O; Rodríguez-Muela, C

    2010-09-01

    Four dairy farms were used to determine the effects of water addition to diets and sample collection location on the particle size distribution and chemical composition of total mixed rations (TMR). Samples were collected weekly from the mixing wagon and from 3 locations in the feed bunk (top, middle, and bottom) for 5 mo (April, May, July, August, and October). Samples were partially dried to determine the effect of moisture on particle size distribution. Particle size distribution was measured using the Penn State Particle Size Separator. Crude protein, neutral detergent fiber, and acid detergent fiber contents were also analyzed. Particle fractions 19 to 8, 8 to 1.18, and <1.18 mm were judged adequate in all TMR for rumen function and milk yield; however, the percentage of material>19 mm was greater than recommended for TMR, according to the guidelines of Cooperative Extension of Pennsylvania State University. The particle size distribution in April differed from that in October, but intermediate months (May, July, and August) had similar particle size distributions. Samples from the bottom of the feed bunk had the highest percentage of particles retained on the 19-mm sieve. Samples from the top and middle of the feed bunk were similar to that from the mixing wagon. Higher percentages of particles were retained on >19, 19 to 8, and 8 to 1.18 mm sieves for wet than dried samples. The reverse was found for particles passing the 1.18-mm sieve. Mean particle size was higher for wet than dried samples. The crude protein, neutral detergent fiber, and acid detergent fiber contents of TMR varied with month of sampling (18-21, 40-57, and 21-34%, respectively) but were within recommended ranges for high-yielding dairy cows. Analyses of TMR particle size distributions are useful for proper feed bunk management and formulation of diets that maintain rumen function and maximize milk production and quality. Water addition may help reduce dust associated with feeding TMR. PMID

  17. Twenty-five additional cases of trisomy 9 mosaic: Birth information, medical conditions, and developmental status.

    PubMed

    Bruns, Deborah A; Campbell, Emily

    2015-05-01

    Limited literature exists on children and adults diagnosed with the mosaic form of trisomy 9. Data from the Tracking Rare Incidence Syndromes (TRIS) project has provided physical characteristics and medical conditions for 14 individuals. This article provides TRIS Survey results of 25 additional cases at two data points (birth and survey completion) as well as developmental status. Results confirmed a number of phenotypic features and medical conditions. In addition, a number of cardiac anomalies were reported along with feeding and respiratory difficulties in the immediate postnatal period. In addition, developmental status data indicated a range in functioning level up to skills in the 36 and 48-month range. Strengths were also noted across the sample in language and communication, fine motor and social-emotional development. Implications for professionals caring for children with this genetic condition are offered. PMID:25755087

  18. Testing 1...2...3...: Additional Files Available for Test Information Online.

    ERIC Educational Resources Information Center

    Fabiano, Emily

    1984-01-01

    Reviews databases providing information on published, standardized and unpublished, non-standardized test instruments: Educational Testing Service File, Mental Measurements Yearbook Database, Dissertation Abstracts Online, ERIC, and Psychological Abstracts. Search strategies, search examples, and a summary chart of searchable fields for test…

  19. 17 CFR 229.1118 - (Item 1118) Reports and additional information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... transaction documents. Describe the reports or other documents provided to security holders required under the... Commission maintains an Internet site that contains reports, proxy and information statements, and other... electronically filed with, or furnished to, the Commission. (2) Disclose whether other reports to...

  20. 75 FR 68608 - Information Collection; Request for Authorization of Additional Classification and Rate, Standard...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-08

    ...(c), and 5.15 (records to be kept by employers under the Fair Labor Standards Act (FLSA), 29 CFR 516... . SUPPLEMENTARY INFORMATION: A. Purpose This regulation prescribes labor standards for federally financed and assisted construction contracts subject to the Davis-Bacon and Related Acts (DBRA), as well as...

  1. 49 CFR 260.25 - Additional information for Applicants not having a credit rating.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... corresponding to those used in this section, the following information: (a) A narrative statement detailing...; and (f) A narrative description of Applicant's management team, including: (1) Rail experience of top... narrative description of Applicant's workforce and the historical rate of employee turnover....

  2. 49 CFR 260.25 - Additional information for Applicants not having a credit rating.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... corresponding to those used in this section, the following information: (a) A narrative statement detailing...; and (f) A narrative description of Applicant's management team, including: (1) Rail experience of top... narrative description of Applicant's workforce and the historical rate of employee turnover....

  3. Software for Information Storage and Retrieval Tested, Evaluated and Compared: Part VI--Various Additional Programs.

    ERIC Educational Resources Information Center

    Sieverts, Eric G.; And Others

    1993-01-01

    Reports on tests evaluating nine microcomputer software packages designed for information storage and retrieval: BRS-Search, dtSearch, InfoBank, Micro-OPC, Q&A, STN-PFS, Strix, TINman, and ZYindex. Tables and narrative evaluations detail results related to security, hardware, user features, search capability, indexing, input, maintenance of files,…

  4. 78 FR 22937 - 60-Day Notice of Proposed Information Collection: Application for Additional Visa Pages or...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE 60-Day... Passport Services ACTION: Notice of request for public comment. SUMMARY: The Department of State is seeking Office of Management and ] Budget (OMB) approval for the information collection described below....

  5. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... shall be made that any such ingredient list is incomplete. (5) An assay method or other analytical method, unless it serves no regulatory or compliance purpose and is shown to fall within the exemption... information as defined in § 20.61 of this chapter: (1) Manufacturing methods or processes, including...

  6. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... shall be made that any such ingredient list is incomplete. (5) An assay method or other analytical method, unless it serves no regulatory or compliance purpose and is shown to fall within the exemption... information as defined in § 20.61 of this chapter: (1) Manufacturing methods or processes, including...

  7. 21 CFR 71.15 - Confidentiality of data and information in color additive petitions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... shall be made that any such ingredient list is incomplete. (5) An assay method or other analytical method, unless it serves no regulatory or compliance purpose and is shown to fall within the exemption... information as defined in § 20.61 of this chapter: (1) Manufacturing methods or processes, including...

  8. 77 FR 58911 - Additional Identifying Information for One (1) Individual Designated Pursuant to Executive Order...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ... Threaten to Disrupt the Middle East Peace Process'' (the ``Order''). DATES: The addition by the Director of... sanctions on persons who threaten to disrupt the Middle East peace process. The President identified in the... Middle East peace ] process; or (2) assist in, sponsor, or provide financial, material, or...

  9. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., percentage by weight, and method of analysis of each element in the additive are required provided, however, that a percentage figure combining the percentages of carbon, hydrogen, and/or oxygen may be provided unless the breakdown into percentages for these individual elements is already known to the...

  10. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., percentage by weight, and method of analysis of each element in the additive are required provided, however, that a percentage figure combining the percentages of carbon, hydrogen, and/or oxygen may be provided unless the breakdown into percentages for these individual elements is already known to the...

  11. 40 CFR 79.21 - Information and assurances to be provided by the additive manufacturer.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., percentage by weight, and method of analysis of each element in the additive are required provided, however, that a percentage figure combining the percentages of carbon, hydrogen, and/or oxygen may be provided unless the breakdown into percentages for these individual elements is already known to the...

  12. Facing Facts: Can the Face-Name Mnemonic Strategy Accommodate Additional Factual Information?

    ERIC Educational Resources Information Center

    Carney, Russell N.; Levin, Joel R.

    2012-01-01

    In 3 experiments, undergraduates used their own best method (control) or an "imposed" face-name mnemonic strategy to associate 18 caricatured faces, names, and additional facts. On all immediate tests (prompted by the faces), and on the delayed tests of Experiments 2a and 2b combined, mnemonic students statistically outperformed control students…

  13. 75 FR 62404 - Agency Information Collection Activities; Proposed Collection; Comment Request; Additional...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-08

    ...-counter (OTC) drugs as generally recognized as safe and effective and not misbranded. DATES: Submit either... additional criteria and procedures for classifying OTC drugs as generally recognized as safe and effective and not misbranded (2002 TEA final rule). The regulations in Sec. 330.14 state that OTC drug...

  14. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... 52.80 Section 52.80 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR...

  15. 10 CFR 52.158 - Contents of application; additional technical information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... 52.158 Section 52.158 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Manufacturing Licenses § 52.158 Contents of application; additional... environmental report as required by 10 CFR 51.54. (2) If the manufacturing license application references...

  16. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... 52.80 Section 52.80 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR...

  17. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... 52.80 Section 52.80 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR...

  18. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... 52.80 Section 52.80 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR...

  19. 10 CFR 52.158 - Contents of application; additional technical information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... 52.158 Section 52.158 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Manufacturing Licenses § 52.158 Contents of application; additional... environmental report as required by 10 CFR 51.54. (2) If the manufacturing license application references...

  20. 10 CFR 52.158 - Contents of application; additional technical information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... 52.158 Section 52.158 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Manufacturing Licenses § 52.158 Contents of application; additional... environmental report as required by 10 CFR 51.54. (2) If the manufacturing license application references...

  1. 10 CFR 52.80 - Contents of applications; additional technical information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... 52.80 Section 52.80 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Combined Licenses § 52.80 Contents of applications; additional technical... environmental report, either in accordance with 10 CFR 51.50(c) if a limited work authorization under 10 CFR...

  2. 10 CFR 52.158 - Contents of application; additional technical information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... 52.158 Section 52.158 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Manufacturing Licenses § 52.158 Contents of application; additional... environmental report as required by 10 CFR 51.54. (2) If the manufacturing license application references...

  3. Review of the Literature on Determinants of Chemical Hazard Information Recall among Workers and Consumers.

    PubMed

    Sathar, Farzana; Dalvie, Mohamed Aqiel; Rother, Hanna-Andrea

    2016-01-01

    In many low and middle income countries (LMIC), workers' and consumers' only access to risk and hazard information in relation to the chemicals they use or work with is on the chemical label and safety data sheet. Recall of chemical hazard information is vital in order for label warnings and precautionary information to promote effective safety behaviors. A literature review, therefore, was conducted on determinants of chemical hazard information recall among workers and consumers globally. Since comprehension and recall are closely linked, the determinants of both were reviewed. Literature was reviewed from both online and print peer reviewed journals for all study designs and countries. This review indicated that the level of education, previous training and the inclusion of pictograms on the hazard communication material are all factors that contribute to the recall of hazard information. The influence of gender and age on recall is incongruent and remains to be explored. More research is required on the demographic predictors of the recall of hazard information, the effect of design and non-design factors on recall, the effect of training on the recall among low literate populations and the examining of different regions or contexts. PMID:27258291

  4. Review of the Literature on Determinants of Chemical Hazard Information Recall among Workers and Consumers

    PubMed Central

    Sathar, Farzana; Dalvie, Mohamed Aqiel; Rother, Hanna-Andrea

    2016-01-01

    In many low and middle income countries (LMIC), workers’ and consumers’ only access to risk and hazard information in relation to the chemicals they use or work with is on the chemical label and safety data sheet. Recall of chemical hazard information is vital in order for label warnings and precautionary information to promote effective safety behaviors. A literature review, therefore, was conducted on determinants of chemical hazard information recall among workers and consumers globally. Since comprehension and recall are closely linked, the determinants of both were reviewed. Literature was reviewed from both online and print peer reviewed journals for all study designs and countries. This review indicated that the level of education, previous training and the inclusion of pictograms on the hazard communication material are all factors that contribute to the recall of hazard information. The influence of gender and age on recall is incongruent and remains to be explored. More research is required on the demographic predictors of the recall of hazard information, the effect of design and non-design factors on recall, the effect of training on the recall among low literate populations and the examining of different regions or contexts. PMID:27258291

  5. Analysis on Soil Seed Bank Diversity Characteristics and Its Relation with Soil Physical and Chemical Properties after Substrate Addition

    PubMed Central

    He, Mengxuan; Lv, Lingyue; Li, Hongyuan; Meng, Weiqing; Zhao, Na

    2016-01-01

    Aims Considered as an essential measure in the application of soil seed bank (SSB) projects, the mixing of substrate and surface soil can effectively improve soil condition. This research is aimed at exploring the diversity characteristics of SSBs and the relationships between SSBs and soil properties. Methods Canonical correspondence analysis (CCA) was adopted to describe the ordination of SSBs on soil properties’ gradients; multiple linear regressions were adopted to analyze the relationship between average growth height and soil properties, density and soil properties. Results Experimental groups of mixed substrate (the mixture of organic and inorganic substrates) had high diversity indexes, especially the Shannon-Wiener Index compared with those of single substrate. Meanwhile, a higher number of species and increased density were also noted in those of mixed substrate. The best test group, No.16, had the highest diversity indexes with a Shannon-Wiener of 1.898, Simpson of 0.633 and Pielou of 0.717, and also showed the highest density of 14000 germinants /m2 and 21 species. In addition, an improvement of the soil’s chemical and physical properties was noted when the substrates were mixed. The mixed substrate of turfy soil and perlite could effectively enhance the soil moisture content, whilst a mixed substrate of rice husk carbon and vermiculite could improve the content of available potassium (AK) and phosphorus (AP) and strengthen soil fertility. The germinated plants also reflected obvious regularities of ordination on soil factor gradients. Three distinct cluster groups were presented, of which the first cluster was distributed in an area with a relatively higher content of AK and AP; the second cluster was distributed at places with relatively higher soil moisture content; and the third cluster of plants didn’t show any obvious relationship with soil physical and chemical properties. Through CCA analysis, AK and AP were considered the most important

  6. Quantifying the value of information for uncertainty reduction in chemical EOR modeling

    NASA Astrophysics Data System (ADS)

    Leray, Sarah; Yeates, Christopher; Douarche, Frédéric; Roggero, Frédéric

    2016-04-01

    Reservoir modeling is a powerful tool to assess the technical and economic feasibility of chemical Enhanced Oil Recovery methods such as the joint injection of surfactant and polymer. Laboratory recovery experiments are usually undertaken on cores to understand recovery mechanisms and to estimate properties, that will be further used to build large scale models. To capture the different processes involved in chemical EOR, models are described by a large number of parameters which are basically only partially constrained by recovery experiments and additional characterizations, mainly because of cost and time restrictions or limited representativeness. Among the most uncertain properties, features the surfactant adsorption which cannot be straightforwardly derived from bulk or simplified dynamic measurements (e.g. single phase dynamic adsorption experiments). It is unfortunately critical for the economics of the process. Identifying the most informative observations (e.g. saturation scans, pressure differential, surfactant production, oil recovery) is of primary interest to compensate deficiency of some characterizations and improve models robustness and their predictive capability. Building a consistent set of recovery experiments that will allow to seize recovery mechanisms is critical as well. To address these inverse methodology issues, we create a synthetic numerical model with a well-defined set of parameter values, considered to be our reference case. This choice of model is based on a similar real data set and a broad literature review. It consists of a water-wet sandstone subject to typical surfactant-polymer injections. We first study the effect of a salinity gradient injected after a surfactant-polymer slug, as it is known to significantly improve oil recovery. We show that reaching optimal conditions of salinity gradient is a fragile balance between surfactant desorption and interfacial tension increase. This high dependence on surfactant adsorption

  7. 50 CFR 23.25 - What additional information is required on a non-Party CITES document?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false What additional information is required on a non-Party CITES document? 23.25 Section 23.25 Wildlife and Fisheries UNITED STATES FISH AND..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL...

  8. 50 CFR 23.25 - What additional information is required on a non-Party CITES document?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false What additional information is required on a non-Party CITES document? 23.25 Section 23.25 Wildlife and Fisheries UNITED STATES FISH AND..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL...

  9. 12 CFR 516.220 - If OTS requests additional information to complete my application, how will it process my...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... complete my application, how will it process my application? 516.220 Section 516.220 Banks and Banking... Standard Treatment § 516.220 If OTS requests additional information to complete my application, how will it... your response. OTS will notify you that it has extended the period before the end of the initial...

  10. 12 CFR 116.220 - If the OCC requests additional information to complete my application, how will it process my...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... complete my application, how will it process my application? 116.220 Section 116.220 Banks and Banking... Treatment § 116.220 If the OCC requests additional information to complete my application, how will it... that it has extended the period before the end of the initial 15-day period and will briefly...

  11. 12 CFR 516.220 - If OTS requests additional information to complete my application, how will it process my...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... complete my application, how will it process my application? 516.220 Section 516.220 Banks and Banking... Standard Treatment § 516.220 If OTS requests additional information to complete my application, how will it... your response. OTS will notify you that it has extended the period before the end of the initial...

  12. 12 CFR 390.128 - If the FDIC requests additional information to complete my application, how will it process my...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... complete my application, how will it process my application? 390.128 Section 390.128 Banks and Banking... additional information to complete my application, how will it process my application? (a) You may use the... will notify you that it has extended the period before the end of the initial 15-day period and...

  13. Inclusion of Additional Plant Species and Trait Information in Dynamic Vegetation Modeling of Arctic Tundra and Boreal Forest Ecosystem

    NASA Astrophysics Data System (ADS)

    Euskirchen, E. S.; Patil, V.; Roach, J.; Griffith, B.; McGuire, A. D.

    2015-12-01

    Dynamic vegetation models (DVMs) have been developed to model the ecophysiological characteristics of plant functional types in terrestrial ecosystems. They have frequently been used to answer questions pertaining to processes such as disturbance, plant succession, and community composition under historical and future climate scenarios. While DVMs have proved useful in these types of applications, it has often been questioned if additional detail, such as including plant dynamics at the species-level and/or including species-specific traits would make these models more accurate and/or broadly applicable. A sub-question associated with this issue is, 'How many species, or what degree of functional diversity, should we incorporate to sustain ecosystem function in modeled ecosystems?' Here, we focus on how the inclusion of additional plant species and trait information may strengthen dynamic vegetation modeling in applications pertaining to: (1) forage for caribou in northern Alaska, (2) above- and belowground carbon storage in the boreal forest and lake margin wetlands of interior Alaska, and (3) arctic tundra and boreal forest leaf phenology. While the inclusion of additional information generally proved valuable in these three applications, this additional detail depends on field data that may not always be available and may also result in increased computational complexity. Therefore, it is important to assess these possible limitations against the perceived need for additional plant species and trait information in the development and application of dynamic vegetation models.

  14. Toxicological information on chemicals published in the Russian language: Contribution to REACH and 3Rs.

    PubMed

    Sihtmäe, Mariliis; Dubourguier, Henri-Charles; Kahru, Anne

    2009-07-28

    This review is reporting on the current situation of publicly available toxicological and ecotoxicological information on chemicals published in Russian language in various libraries, databases as well as in the Internet. This information can be beneficial for the new EU chemical policy REACH and for the development of intelligent testing strategies (involving also QSAR and QAAR) that enable a significant increase in the use of non-testing information for regulatory decision making, thus minimizing the need for animal testing according to the 3R's strategy. Currently, the access to this information is limited due to the language barrier and low level of digitalization of respective journals and books. Fortunately, on-line translation services are overcoming language barriers already now. PMID:19433131

  15. Toxicological information on chemicals published in the Russian language: Contribution to REACH and 3Rs.

    PubMed

    Sihtmäe, Mariliis; Dubourguier, Henri-Charles; Kahru, Anne

    2009-07-28

    This review is reporting on the current situation of publicly available toxicological and ecotoxicological information on chemicals published in Russian language in various libraries, databases as well as in the Internet. This information can be beneficial for the new EU chemical policy REACH and for the development of intelligent testing strategies (involving also QSAR and QAAR) that enable a significant increase in the use of non-testing information for regulatory decision making, thus minimizing the need for animal testing according to the 3R's strategy. Currently, the access to this information is limited due to the language barrier and low level of digitalization of respective journals and books. Fortunately, on-line translation services are overcoming language barriers already now.

  16. Tautomers of a Fluorescent G Surrogate and Their Distinct Photophysics Provide Additional Information Channels.

    PubMed

    Sholokh, Marianna; Improta, Roberto; Mori, Mattia; Sharma, Rajhans; Kenfack, Cyril; Shin, Dongwon; Voltz, Karine; Stote, Roland H; Zaporozhets, Olga A; Botta, Maurizio; Tor, Yitzhak; Mély, Yves

    2016-07-01

    Thienoguanosine ((th) G) is an isomorphic nucleoside analogue acting as a faithful fluorescent substitute of G, with respectable quantum yield in oligonucleotides. Photophysical analysis of (th) G reveals the existence of two ground-state tautomers with significantly shifted absorption and emission wavelengths, and high quantum yield in buffer. Using (TD)-DFT calculations, the tautomers were identified as the H1 and H3 keto-amino tautomers. When incorporated into the loop of (-)PBS, the (-)DNA copy of the HIV-1 primer binding site, both tautomers are observed and show differential sensitivity to protein binding. The red-shifted H1 tautomer is strongly favored in matched (-)/(+)PBS duplexes, while the relative emission of the H3 tautomer can be used to detect single nucleotide polymorphisms. These tautomers and their distinct environmental sensitivity provide unprecedented information channels for analyzing G residues in oligonucleotides and their complexes.

  17. Extracting additional risk managers information from a risk assessment of Listeria monocytogenes in deli meats.

    PubMed

    Pérez-Rodríguez, F; van Asselt, E D; Garcia-Gimeno, R M; Zurera, G; Zwietering, M H

    2007-05-01

    The risk assessment study of Listeria monocytogenes in ready-to-eat foods conducted by the U.S. Food and Drug Administration is an example of an extensive quantitative microbiological risk assessment that could be used by risk analysts and other scientists to obtain information and by managers and stakeholders to make decisions on food safety management. The present study was conducted to investigate how detailed sensitivity analysis can be used by assessors to extract more information on risk factors and how results can be communicated to managers and stakeholders in an understandable way. The extended sensitivity analysis revealed that the extremes at the right side of the dose distribution (at consumption, 9 to 11.5 log CFU per serving) were responsible for most of the cases of listeriosis simulated. For concentration at retail, values below the detection limit of 0.04 CFU/g and the often used limit for L. monocytogenes of 100 CFU/g (also at retail) were associated with a high number of annual cases of listeriosis (about 29 and 82%, respectively). This association can be explained by growth of L. monocytogenes at both average and extreme values of temperature and time, indicating that a wide distribution can lead to high risk levels. Another finding is the importance of the maximal population density (i.e., the maximum concentration of L. monocytogenes assumed at a certain temperature) for accurately estimating the risk of infection by opportunistic pathogens such as L. monocytogenes. According to the obtained results, mainly concentrations corresponding to the highest maximal population densities caused risk in the simulation. However, sensitivity analysis applied to the uncertainty parameters revealed that prevalence at retail was the most important source of uncertainty in the model.

  18. Chemical mixtures from a public health perspective: the importance of research for informed decision making.

    PubMed

    Sexton, K; Beck, B D; Bingham, E; Brain, J D; DeMarini, D M; Hertzberg, R C; O'Flaherty, E J; Pounds, J G

    1995-12-28

    When considered from a public health perspective, the central question regarding chemical mixtures is deceptively simple: Are current approaches to risk assessment for chemical mixtures affording effective (adequate) and efficient (cost-effective) protection for members of our society? Answering this question realistically depends on an understanding of the hierarchical goals of public health (i.e. prevention, intervention, treatment) and an accurate evaluation of the extent to which these goals are being achieved. To allow decision makers to make informed judgments about the health risks of chemical mixtures, adequate scientific knowledge and understanding must be available to support risk assessment activities, which are an integral part of the regulatory decision making process. Designing and implementing relevant research depends on the existence of a feedback loop between researchers and regulators, where the information needs of regulators influence the nature and direction of research and the information and understanding generated by researchers improves the scientific basis for public health decisions. A clear, consistent, commonly accepted taxonomy for describing important mixture-related phenomena is a key factor in creating and maintaining the necessary feedback loop. Ultimately, both researchers and regulators share a common goal with regard to chemical mixtures; improving the state-of-the-science so that we can make informed decisions about protecting public health. A survey of research issues and needs that are crucial to attaining this goal is presented. PMID:8571378

  19. Compilation of Physicochemical and Toxicological Information About Hydraulic Fracturing-Related Chemicals (Draft Database)

    EPA Science Inventory

    The purpose of this product is to make accessible the information about the 1,173 hydraulic fracturing-related chemicals that were listed in the external review draft of the Hydraulic Fracturing Drinking Water Assessment that was released recently. The product consists of a serie...

  20. Incorporating Chemical Information Instruction and Environmental Science into the First-Year Organic Chemistry Laboratory

    ERIC Educational Resources Information Center

    Landolt, R. G.

    2006-01-01

    The chemical information instruction and environmental science which is incorporated into a first-year organic chemistry laboratory is presented. The students are charged with devised search strategies, conducting online searches and limiting the project scope to ocean systems. The laboratory serves to provide for search strategy development…

  1. The Effect of Peer Review on Information Literacy Outcomes in a Chemical Literature Course

    ERIC Educational Resources Information Center

    Zwicky, David A.; Hands, Michael D.

    2016-01-01

    This article describes the use of peer review in a writing project involving upper-level chemistry students in a chemical literature course, with the goal of improving student performance in meeting information literacy outcomes. Students were asked to find articles on a topic of their choice over the course of a semester and assemble the results…

  2. Development of an Exchange Format for the European Environmental Chemical Data and Information Network (ECDIN).

    ERIC Educational Resources Information Center

    And Others; Proctor, David, J.

    1978-01-01

    Uses collection and storage of data in an environmental chemicals data bank to develop an exchange format of hierarchical tree structure between network partners. Rules identify and process the nodes in the tree in such a way that information is neither lost nor degraded upon transfer between network partners. (CWM)

  3. The Use of Additives to Control the Morphology of Thin Films Synthesized Using Aerosol Assisted Chemical Vapour Deposition

    NASA Astrophysics Data System (ADS)

    Kaye, Karl; Turner, David; McKenna, David; Cackett, Adam; Hyett, Geoffrey

    This paper identifies and discusses the use of additives to control the morphology of nanoscale crystalline zinc oxide films, grown using AACVD, principally from a solution of zinc acetate in methanol. We will discuss the use of both positively charged additives such as tetramethylammonium bromide and cetyltrimethylammonium bromide as well as negatively charged additives like sodium dodecylsulphate. Additives such as these, combined with other experimental parameters such as deposition time, have allowed us to control the size of the particles (from 100 to 400 nm in diameter), their orientation, and the regularity of their shape, from rough edged plates to well defined hexagons. We will show that the additives can be used to control morphology consistently over a temperature range of 250-400 °C, and that this technique can be applied generally to a number of additives and solvents.

  4. Access and use of information resources in assessing health risks from chemical exposure: Proceedings

    SciTech Connect

    Not Available

    1990-12-31

    Health risk assessment is based on access to comprehensive information about potentially hazardous agents in question. Relevant information is scattered throughout the literature, and often is not readily accessible. To be useful in assessment efforts, emerging scientific findings, risk assess parameters, and associated data must be compiled and evaluated systemically. The US Environmental Protection Agency (EPA) and Oak Ridge National Laboratory (ORNL) are among the federal agencies heavily involved in this effort. This symposium was a direct response by EPA and ORNL to the expressed needs of individuals involved in assessing risks from chemical exposure. In an effort to examine the state of the risk assessment process, the availability of toxicological information, and the future development and transfer of this information, the symposium provided an excellent cadre of speakers and participants from state and federal agencies, academia and research laboratories to address these topics. This stimulating and productive gathering discussed concerns associated with (1) environmental contamination by chemicals; (2) laws regulating chemicals; (3) information needs and resources; (4) applications; (5) challenges and priorities; and (6)future issues. Individual reports are processed separately for the data bases.

  5. Using the Viking biology experimental results to obtain chemical information about Martian regolith

    NASA Technical Reports Server (NTRS)

    Plumb, Robert C.

    1992-01-01

    Although initially formulated as biology experiments, most of the results produced by the Viking Labeled Release (LR), Gas Exchange (GEX), and Pyrolytic Release (PR) experiments have been reproduced by chemical means. The experiments do not need more study as 'biological' phenomena, but they do deserve much more careful consideration from a chemical viewpoint. They are the only 'wet-chemical' experiments that scientists have performed on another planet, but they have not found very general use as sources of scientific information. There is a large set of potentially useful chemical observations, e.g., the three resolvable and precisely measured kinetic components of the release of C-14-labeled gases, the thermal sensitivity and magnitudes of the oxidation reaction(s) of the LR experiments, the kinetics and magnitude of the O2 and CO2 release of the GEX experiments, the thermal sensitivity of the GEX results, the differences between the thermal sensitivity of the GEX and the thermal sensitivity of the LR responses, and the kinetics and magnitudes of the LR successive injection reabsorption effect. It should be possible to test many chemical aspects of hypothetical martian phenomena in experiments using the biology experimental configurations and derive much valuable information by comparisons with the Viking observations.

  6. A new species of Neparholaspis (Acari: Parholaspididae) from Russia, with additional information on Neparholaspis evansi Krantz, 1960.

    PubMed

    Marchenko, Irina I

    2016-01-01

    Neparholaspis dubatolovi sp. nov. is described and illustrated from adult females and males collected from litter and moss in montane forest in north-eastern Sikhote-Alin Ridge in the Far East of Russia. Additional morphological information and illustrations of Neparholaspis evansi Krantz, 1960 are provided, based on examination of a paratype. A key to the world species of Neparholaspis is provided. PMID:27615851

  7. Biochemical analyses of the antioxidative activity and chemical ingredients in eight different Allium alien monosomic addition lines.

    PubMed

    Yaguchi, Shigenori; Matsumoto, Misato; Date, Rie; Harada, Kazuki; Maeda, Toshimichi; Yamauchi, Naoki; Shigyo, Masayoshi

    2013-01-01

    We measured the antioxidant contents and antioxidative activities in eight Allium fistulosum-shallot monosomic addition lines (MAL; FF+1A-FF+8A). The high antioxidative activity lines (FF+2A and FF+6A) showed high polyphenol accumulation. These additional chromosomes (2A and 6A) would therefore have anonymous genes related to the upregulation of polyphenol production, the antioxidative activities consequently being increased in these MALs. PMID:24317054

  8. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  9. Information resources for assessing health effects from chemical exposure: Challenges, priorities, and future issues

    SciTech Connect

    Seigel, S.

    1990-12-31

    Issues related to developing information resources for assessing the health effects from chemical exposure include the question of how to address the individual political issues relevant to identifying and determining the timeliness, scientific credibility, and completeness of such kinds of information resources. One of the important ways for agencies to share information is through connection tables. This type of software is presently being used to build information products for some DHHS agencies. One of the challenges will be to convince vendors of data of the importance of trying to make data files available to communities that need them. In the future, information processing will be conducted with neural networks, object-oriented database management systems, and fuzzy-set technologies, and meta analysis techniques.

  10. Proposal for a new tomographic device providing information on the chemical properties of a body section

    SciTech Connect

    Gatti, E.; Rehak, P.; Kemmer, J.

    1986-02-27

    A system to analyze the chemical properties of a region of tissue located deep inside the human body without having to access it is proposed. The method is based on a high precision detection of x-rays or ..gamma..-rays (photons) from an external source Compton scattered from the tissue under inspection. The method provides chemical information of plane regions lying not too deep inside the body (<6 cm). The amount of radiation absorbed by the body is about the same as needed for a standard x-ray tomography. The exposure time is estimated to be shorter than 10 minutes. 37 refs., 13 figs.

  11. Effects of N{sub 2} addition on chemical dry etching of silicon oxide layers in F{sub 2}/N{sub 2}/Ar remote plasmas

    SciTech Connect

    Hwang, J.Y.; Kim, D.J.; Lee, N.-E.; Jang, Y.C.; Bae, G.H.

    2006-07-15

    In this study, chemical dry etching characteristics of silicon oxide layers were investigated in the F{sub 2}/N{sub 2}/Ar remote plasmas. A toroidal-type remote plasma source was used for the generation of remote plasmas. The effects of additive N{sub 2} gas on the etch rates of various silicon oxide layers deposited using different deposition techniques and precursors were investigated by varying the various process parameters, such as the F{sub 2} flow rate, the additive N{sub 2} flow rate, and the substrate temperature. The etch rates of the various silicon oxide layers at room temperature were initially increased and then decreased with the N{sub 2} flow increased, which indicates an existence of the maximum etch rates. Increase in the oxide etch rates under the decreased optical emission intensity of the F radicals with the N{sub 2} flow increased implies that the chemical etching reaction is in the chemical reaction-limited regime, where the etch rate is governed by the surface chemical reaction rather than the F radical density. The etch rates of the silicon oxide layers were also significantly increased with the substrate temperature increased. In the present experiments, the F{sub 2} gas flow, the additive N{sub 2} flow rate, and the substrate temperature were found to be the critical parameters in determining the etch rate of the silicon oxide layers.

  12. National measures under the chemical weapons convention to protect confidential business information and compensate for its loss

    SciTech Connect

    Tanzman, E.A.; Kellman, B.

    1995-07-01

    This report contains a discussion presented at the Regional Seminar on the National Authority and the Chemical Weapons Convention. Measures to protect confidential business information and compensation for information which has not been sufficiently protected is discussed.

  13. Application of multivariate analysis to the effects of additives on chemical and sensory quality of stored coffee brew.

    PubMed

    Pérez-Martínez, Mónica; Sopelana, Patricia; de Peña, M Paz; Cid, Concepción

    2008-12-24

    The aim of this work was to obtain a black coffee brew to be consumed hot by extension of its shelf life, by addition of additives. Four pH-regulator agents (sodium and potassium carbonates and bicarbonates), one pH regulator and antioxidant (sodium citrate), three antioxidants [sodium ascorbate, ethylenediaminetetracetic acid (EDTA), and sodium sulfite], and lactoserum were tested by sensory analysis. Sodium carbonate and bicarbonate were selected for a study of the physicochemical (soluble and volatile compounds related to the sensory properties) and sensorial quality of coffee brew stored for 90 days at 4 degrees C. Although both additives extended the shelf life of the coffee brew up to 60 days, sodium carbonate was the chosen additive because it was the most useful in limiting the pH decrease and perception of sourness, which are some of the main factors involved in the rejection of stored coffee brews, and it better maintained the aroma and taste/flavor. Moreover, the application of multivariate analysis facilitated first the description of the global changes of the coffee brews with or without additives throughout the storage using principal component analysis and second the obtainment of a simple equation only with pH and caffeic acid parameters to discriminate the three types of coffee brews and simplify the analytical process, by means of the stepwise discriminant analysis.

  14. [Global trends of food safety information associated with chemicals in food].

    PubMed

    Yamamoto, Miyako; Uneyama, Chikako; Toda, Miou; Morikawa, Kaoru

    2005-01-01

    Recently, a number of food safety problems have frequently arisen and consumer concerns have drastically increased. In order to meet these concerns, we have been publishing a biweekly bulletin called "Food Safety Information" since April 2003, monitoring the latest information from overseas on food safety. In this paper, we analyze the recent trends of information on food chemicals in the bulletin published between April 2003 and March 2005 in order to clarify the problems that need to be followed up. Among the 1,199 entries on food chemicals included in the bulletin, about 50% were from the EU and European organizations such as the FSA (UK). Approximately 20% of the total information focused on food contaminants such as heavy metals, dioxins, PCBs and mycotoxins. Scientific evidence-based information on dietary supplements and herb products was also suggested to be important to protect public health as well as food contaminants. We monitor the latest information on food safety constantly and continuously, which is important for long-term follow up of food safety issues of concern. We also provide the bulletin to the general public through the website as well as to researchers and risk managers. PMID:16541754

  15. A quantum chemical study of the mechanisms of olefin addition to group 9 transition metal dioxo compounds.

    PubMed

    Ahmed, Issahaku; Tia, Richard; Adei, Evans

    2016-01-01

    The mechanistic aspects of ethylene addition to MO2(CH2)(CH3) (M=Co, Rh, Ir) have been investigated with a Hartree-Fock/DFT hybrid functional at the MO6/LACVP* and B3LYP/LACVP* levels of theory to elucidate the reaction pathways on the singlet, doublet and triplet potential energy surfaces (PES). In the reaction of the IrO2CH2CH3 complex with ethylene, [3 + 2]C,O addition is the most plausible pathway on the singlet PES, the [3 + 2]O,O addition is the most favoured pathway on the doublet surface whiles the stepwise [1 + 1] addition involving the oxygen atom of the complex in the first step and the carbon atom of the complex in the second step is the most plausible pathway on the triplet PES. For the reaction of the RhO2(CH2)(CH3) complex, the [2 + 2]Rh,O addition pathway is the most favoured on the singlet surface, the [2 + 2]Rh,C is the most plausible pathway on the triplet PES and [3 + 2]C,O is the most plausible on the doublet surface. For the reactions of the CoO2(CH2)(CH3) complex, the [1 + 2]O addition is the most plausible on the singlet PES, [3 + 2]C=Co=O cycloaddition to form the five-membered intermediate is the most preferred pathway on the doublet PES, whiles on the triplet PES the preferred pathway is the [3 + 2] addition across the O=Co=O bond of the metal complex. The reactions of olefins with the Co dioxo complex have lower activation barriers for the preferred [3 + 2] and [2 + 2] addition pathways as well as fewer side reactions than those of the rhodium and iridium systems. This could imply that the cobalt dioxo complexes can efficiently and selectively catalyze specific reactions in oxidation of olefins than Rh and Ir oxo complexes will do and therefore Co oxo complexes may be better catalysts for specific oxidation reactions of olefins than Rh and Ir complexes are. The activation barriers for the formation of the four-or five-membered metallacycle intermediates through [2 + 2] or [3 + 2] cyclo-addition are lower on the

  16. Neural network recognition of chemical class information in mobility spectra obtained at high temperatures

    NASA Technical Reports Server (NTRS)

    Bell, S.; Nazarov, E.; Wang, Y. F.; Rodriguez, J. E.; Eiceman, G. A.

    2000-01-01

    A minimal neural network was applied to a large library of high-temperature mobility spectra drawn from 16 chemical classes including 154 substances with 2000 spectra at various concentrations. A genetic algorithm was used to create a representative subset of points from the mobility spectrum as input to a cascade-type back-propagation network. This network demonstrated that significant information specific to chemical class was located in the spectral region near the reactant ions. This network failed to generalize the solution to unfamiliar compounds necessitating the use of complete spectra in network processing. An extended back-propagation network classified unfamiliar chemicals by functional group with a mean for average values of 0.83 without sulfides and 0.79 with sulfides. Further experiments confirmed that chemical class information was resident in the spectral region near the reactant ions. Deconvolution of spectra demonstrated the presence of ions, merged with the reactant ion peaks that originated from introduced samples. The ability of the neural network to generalize the solution to unfamiliar compounds suggests that these ions are distinct and class specific.

  17. Combining Chemical Information Literacy, Communication Skills, Career Preparation, Ethics, and Peer Review in a Team-Taught Chemistry Course

    ERIC Educational Resources Information Center

    Jones, Mary Lou Baker; Seybold, Paul G.

    2016-01-01

    The widely acknowledged need to include chemical information competencies and communication skills in the undergraduate chemistry curriculum can be accommodated in a variety of ways. We describe a team-taught, semester-length course at Wright State University which combines chemical information literacy, written and oral communication skills,…

  18. Chemical and particle-size evidence for addition of fine dust to soils of the midwestern United States

    NASA Astrophysics Data System (ADS)

    Mason, Joseph A.; Jacobs, Peter M.

    1998-12-01

    Significant long-term atmospheric dust additions to soils are well documented in many parts of the world, but not in the midwestern United States. We investigated elemental mass fluxes associated with soil development in late Wisconsinan loess in Illinois and Minnesota, using Zr as a stable index element. Positive mass fluxes of Al, Fe, and Ti can most plausibly be explained by additions to these soils of fine far-traveled dust, with higher Al/Zr, Fe/Zr, and Ti/Zr ratios than the coarser locally derived loess. High-resolution particle-size analyses support this explanation. The proposed dust influx will complicate efforts to quantify weathering processes in these soils. Far-traveled dust influx could have occurred simultaneously with the final phase of local loess deposition, and/or later, in the Holocene. Depending on the timing of dust influx, many other soils of the region may have been affected by it.

  19. The effects of additives in napier grass silages on chemical composition, feed intake, nutrient digestibility and rumen fermentation.

    PubMed

    Bureenok, Smerjai; Yuangklang, Chalermpon; Vasupen, Kraisit; Schonewille, J Thomas; Kawamoto, Yasuhiro

    2012-09-01

    The effect of silage additives on ensiling characteristics and nutritive value of Napier grass (Pennisetum purpureum) silages was studied. Napier grass silages were made with no additive, fermented juice of epiphytic lactic acid bacteria (FJLB), molasses or cassava meal. The ensiling characteristics were determined by ensiling Napier grass silages in airtight plastic pouches for 2, 4, 7, 14, 21 and 45 d. The effect of Napier grass silages treated with these additives on voluntary feed intake, digestibility, rumen fermentation and microbial rumen fermentation was determined in 4 fistulated cows using 4×4 Latin square design. The pH value of the treated silages rapidly decreased, and reached to the lowest value within 7 d of the start of fermentation, as compared to the control. Lactic acid content of silages treated with FJLB was stable at 14 d of fermentation and constant until 45 d of ensiling. At 45 d of ensiling, neutral detergent fiber (NDF) and acid detergent fiber (ADF) of silage treated with cassava meal were significantly lower (p<0.05) than the others. In the feeding trial, the intake of silage increased (p<0.05) in the cow fed with the treated silage. Among the treatments, dry matter intake was the lowest in the silage treated with cassava meal. The organic matter, crude protein and NDF digestibility of the silage treated with molasses was higher than the silage without additive and the silage treated with FJLB. The rumen parameters: ruminal pH, ammonia-nitrogen (NH3-N), volatile fatty acid (VFA), blood urea nitrogen (BUN) and bacterial populations were not significantly different among the treatments. In conclusion, these studies confirmed that the applying of molasses improved fermentative quality, feed intake and digestibility of Napier grass.

  20. The effect of chemical additives on the synthesis of ethanol. Final technical report, September 15, 1987--March 15, 1992

    SciTech Connect

    Chuang, S.S.C.

    1992-03-06

    The objective of this research was to investigate the reaction mechanism of higher alcohol and aldehyde synthesis from syngas and the role of additives in the synthesis. An in situ IR reaction system and probe molecule technique were developed to study adsorbed species, active sites, and reaction pathway during reaction. The catalysts used for this study included silica-supported Rh, Ru, and Ni. (VC)

  1. Influence of dried Hokkaido pumpkin and ascorbic acid addition on chemical properties and colour of corn extrudates.

    PubMed

    Obradović, Valentina; Babić, Jurislav; Šubarić, Drago; Jozinović, Antun; Ačkar, Đurđica; Klarić, Ilija

    2015-09-15

    The influence of Hokkaido pumpkin powder (PP) addition to corn grits at levels 4%, 6%, and 8% and ascorbic acid (AA) addition at levels 0.5% and 1% was evaluated. Extrusion was done using a single-screw extruder at two temperature regimes: 135/170/170°C (E1) and 100/150/150°C (E2). Mathematical models that describe the influence of additives on the colour of extrudates were determined. Raw extrusion mixtures as well as obtained extrudates were tested for ascorbic acid, polyphenol, proteins, fat, crude fibre, ash and carotenoids content, and antioxidant activity. E1 extrusion regime acted favourably on polyphenols, crude fibre content, and antioxidant activity. It also caused higher fat degradation than E2 extrusion. Xanthophylls (lutein and zeaxanthin) were less sensitive to extrusion than carotenes (α-carotene, 9-cis-β-carotene and 13-cis-β-carotene). Ascorbic acid was more sensitive to higher extrusion temperatures (49-76% degradation). It provided protection to carotenoids and consequently the colour of the extrudates.

  2. Use of selected toxicology information resources in assessing relationships between chemical structure and biological activity

    SciTech Connect

    Wassom, J.S.

    1985-09-01

    This paper addresses the subject of the use of the selected toxicology information resources in assessing relationships between chemical structure and specific end points. To assist the researcher in how to access the primary literature of genetic toxicology, teratogenesis, and carcinogenesis, three specific specialized information centers are discussed - Environmental Mutagen Information Center, Environmental Teratology Information Center, and Environmental Carcinogenesis Information Center. Also included are descriptions of information resources that contain evaluated (peer-reviewed) biological research results. The US Environmental Protection Agency Genetic Toxicology Program, the International Agency for Research on Cancer Monographs, and the Toxicology Data Bank are the best sources currently available to obtain peer-reviewed results for compounds tested for genotoxicity, carcinogenicity, and other toxicological end points. The value of published information lies in its use. It has become evident that most information cannot be accepted at face value for interpretation and analysis when subjected to stringent quality evaluation criteria. This deficit can be corrected by rigid editorship and the cognizance of authors. Increased interest in alternative methods to in vivo animal testing will be exemplified by use of short-term bioassays and in structure-activity relationship studies. With respect to this latter area, it must be remembered that mechanically (computer generated) derived data cannot substitute, at least at this stage, for data obtained from actual animal testing. The future of structure-activity relationship studies will rest only in their use as a predictive tool.

  3. Use of selected toxicology information resources in assessing relationships between chemical structure and biological activity.

    PubMed Central

    Wassom, J S

    1985-01-01

    This paper addresses the subject of the use of selected toxicology information resources in assessing relationships between chemical structure and specific biological end points. To assist the researcher in how to access the primary literature of genetic toxicology, teratogenesis, and carcinogenesis, three specific specialized information centers are discussed--Environmental Mutagen Information Center, Environmental Teratology Information Center, and Environmental Carcinogenesis Information Center. Also included are descriptions of information resources that contain evaluated (peer-reviewed) biological research results. The U.S. Environmental Protection Agency Genetic Toxicology Program, the International Agency for Research on Cancer Monographs, and the Toxicology Data Bank are the best sources currently available to obtain peer-reviewed results for compounds tested for genotoxicity, carcinogenicity, and other toxicological end points. The value of published information lies in its use. It has become evident that most information cannot be accepted at face value for interpretation and analysis when subjected to stringent quality evaluation criteria. This deficit can be corrected by rigid editorship and the cognizance of authors. Increased interest in alternative methods to in vivo animal testing will be exemplified by use of short-term bioassays and in structure-activity relationship studies. With respect to this latter area, it must be remembered that mechanically (computer generated) derived data cannot substitute, at least at this stage, for data obtained from actual animal testing. The future of structure-activity relationship studies will rest only in their use as a predictive tool. PMID:4065070

  4. Impact of uncertainty in soil, climatic, and chemical information in a pesticide leaching assessment

    NASA Astrophysics Data System (ADS)

    Loague, Keith; Green, Richard E.; Giambelluca, Thomas W.; Liang, Tony C.; Yost, Russell S.

    1990-01-01

    A simple mobility index, when combined with a geographic information system, can be used to generate rating maps which indicate qualitatively the potential for various organic chemicals to leach to groundwater. In this paper we investigate the magnitude of uncertainty associated with pesticide mobility estimates as a result of data uncertainties. Our example is for the Pearl Harbor Basin, Oahu, Hawaii. The two pesticides included in our analysis are atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) and diuron [3-(3,4-dichlorophenyul)-1,1-dimethylarea]. The mobility index used here is known as the Attenuation Factor ( AF); it requires soil, hydrogeologic, climatic and chemical information as input data. We employ first-order uncertainty analysis to characterize the uncertainty in estimates of AF resulting from uncertainties in the various input data. Soils in the Pearl Harbor Basin are delineated at the order taxonomic category for this study. Our results show that there can be a significant amount of uncertainty in estimates of pesticide mobility for the Pearl Harbor Basin. This information needs to be considered if future decisions concerning chemical regulation are to be based on estimates of pesticide mobility determined from simple indices.

  5. Detection of the hydroperoxyl radical HO2 toward ρ Ophiuchi A. Additional constraints on the water chemical network

    NASA Astrophysics Data System (ADS)

    Parise, B.; Bergman, P.; Du, F.

    2012-05-01

    Context. Hydrogen peroxide (HOOH) was recently detected toward ρ Oph A. Subsequent astrochemical modeling that included reactions in the gas phase and on the surface of dust grains was able to explain the observed abundance, and highlighted the importance of grain chemistry in the formation of HOOH as an intermediate product in water formation. This study also predicted that the hydroperoxyl radical HO2, the precursor of HOOH, should be detectable. Aims: We aim at detecting the hydroperoxyl radical HO2 in ρ Oph A. Methods: We used the IRAM 30 m and the APEX telescopes to target the brightest HO2 lines at about 130 and 260 GHz. Results: We detect five lines of HO2 (comprising seven individual molecular transitions). The fractional abundance of HO2 is found to be about 10-10, a value similar to the abundance of HOOH. This observational result is consistent with the prediction of the above mentioned astrochemical model, and thereby validates our current understanding of the water formation on dust grains. Conclusions: This detection, anticipated by a sophisticated gas-grain chemical model, demonstrates that models of grain chemistry have improved tremendously and that grain surface reactions now form a crucial part of the overall astrochemical network. Based on observations carried out with the IRAM 30 m and the APEX telescopes. IRAM is supported by INSU/CNRS (France), MPG (Germany) and IGN (Spain). APEX is a collaboration between the Max Planck Institute for Radio Astronomy, the Onsala Space Observatory, and the European Southern Observatory.

  6. Effects of drying control chemical additive on properties of Li 4Ti 5O 12 negative powders prepared by spray pyrolysis

    NASA Astrophysics Data System (ADS)

    Ju, Seo Hee; Kang, Yun Chan

    High-density Li 4Ti 5O 12 powders comprising spherical particles are prepared by spray pyrolysis from a solution containing dimethylacetamide (drying control chemical additive) and citric acid and ethylene glycol (organic additives). The prepared powders have high discharge capacities and good cycle properties. The optimum concentration of dimethylacetamide is 0.5 M. The addition of dimethylacetamide to the polymeric spray solutions containing citric acid and ethylene glycol helps in the effective control of the morphology of the Li 4Ti 5O 12 powders. At a constant current density of 0.17 mA g -1, the initial discharge capacities of the powders obtained from the spray solution with and without the organic additives are 171 and 167 mAh g -1, respectively.

  7. Alternatives Assessment Frameworks: Research Needs for the Informed Substitution of Hazardous Chemicals

    PubMed Central

    Jacobs, Molly M.; Malloy, Timothy F.; Tickner, Joel A.; Edwards, Sally

    2015-01-01

    Background Given increasing pressures for hazardous chemical replacement, there is growing interest in alternatives assessment to avoid substituting a toxic chemical with another of equal or greater concern. Alternatives assessment is a process for identifying, comparing, and selecting safer alternatives to chemicals of concern (including those used in materials, processes, or technologies) on the basis of their hazards, performance, and economic viability. Objectives The purposes of this substantive review of alternatives assessment frameworks are to identify consistencies and differences in methods and to outline needs for research and collaboration to advance science policy practice. Methods This review compares methods used in six core components of these frameworks: hazard assessment, exposure characterization, life-cycle impacts, technical feasibility evaluation, economic feasibility assessment, and decision making. Alternatives assessment frameworks published from 1990 to 2014 were included. Results Twenty frameworks were reviewed. The frameworks were consistent in terms of general process steps, but some differences were identified in the end points addressed. Methodological gaps were identified in the exposure characterization, life-cycle assessment, and decision–analysis components. Methods for addressing data gaps remain an issue. Discussion Greater consistency in methods and evaluation metrics is needed but with sufficient flexibility to allow the process to be adapted to different decision contexts. Conclusion Although alternatives assessment is becoming an important science policy field, there is a need for increased cross-disciplinary collaboration to refine methodologies in support of the informed substitution and design of safer chemicals, materials, and products. Case studies can provide concrete lessons to improve alternatives assessment. Citation Jacobs MM, Malloy TF, Tickner JA, Edwards S. 2016. Alternatives assessment frameworks: research

  8. Chemical Emissions of Residential Materials and Products: Review of Available Information

    SciTech Connect

    Willem, Henry; Singer, Brett

    2010-09-15

    This report is prepared in the context of a larger program whose mission is to advance understanding of ventilation and indoor air quality in U.S. homes. A specific objective of this program is to develop the scientific basis ? through controlled experiments, monitoring and analysis ? for health risk-based ventilation standards. Appropriate and adequate ventilation is a basic element of a healthy home. Ventilation provides outdoor air and in the process removes indoor odors and contaminants including potentially unhealthful chemicals emitted by indoor materials, products and activities. Ventilation traditionally was assured to occur via infiltration of outdoor air through cracks and other leakage pathways in the residential building envelope. As building air tightness is improved for energy efficiency, infiltration can be reduced to inadequate levels. This has lead to the development of standards requiring mechanical ventilation. Though nominally intended to ensure acceptable indoor air quality, the standards are not explicitly tied to health risk or pollutant exposure targets. LBNL is currently designing analyses to assess the impact of varying ventilation standards on pollutant concentrations, health risks and energy use. These analyses require information on sources of chemical pollutant emissions, ideally including emission rates and the impact of ventilation on emissions. Some information can be obtained from recent studies that report measurements of various air contaminants and their concentrations in U.S. residences. Another way to obtain this information is the bottom-up approach of collecting and evaluating emissions data from construction and interior materials and common household products. This review contributes to the latter approach by summarizing available information on chemical emissions from new residential products and materials. We review information from the scientific literature and public sources to identify and discuss the databases that

  9. Ensuring Adequate Health and Safety Information for Decision Makers during Large-Scale Chemical Releases

    NASA Astrophysics Data System (ADS)

    Petropoulos, Z.; Clavin, C.; Zuckerman, B.

    2015-12-01

    The 2014 4-Methylcyclohexanemethanol (MCHM) spill in the Elk River of West Virginia highlighted existing gaps in emergency planning for, and response to, large-scale chemical releases in the United States. The Emergency Planning and Community Right-to-Know Act requires that facilities with hazardous substances provide Material Safety Data Sheets (MSDSs), which contain health and safety information on the hazardous substances. The MSDS produced by Eastman Chemical Company, the manufacturer of MCHM, listed "no data available" for various human toxicity subcategories, such as reproductive toxicity and carcinogenicity. As a result of incomplete toxicity data, the public and media received conflicting messages on the safety of the contaminated water from government officials, industry, and the public health community. Two days after the governor lifted the ban on water use, the health department partially retracted the ban by warning pregnant women to continue avoiding the contaminated water, which the Centers for Disease Control and Prevention deemed safe three weeks later. The response in West Virginia represents a failure in risk communication and calls to question if government officials have sufficient information to support evidence-based decisions during future incidents. Research capabilities, like the National Science Foundation RAPID funding, can provide a solution to some of the data gaps, such as information on environmental fate in the case of the MCHM spill. In order to inform policy discussions on this issue, a methodology for assessing the outcomes of RAPID and similar National Institutes of Health grants in the context of emergency response is employed to examine the efficacy of research-based capabilities in enhancing public health decision making capacity. The results of this assessment highlight potential roles rapid scientific research can fill in ensuring adequate health and safety data is readily available for decision makers during large

  10. Chemical additive to enhance antimicrobial efficacy of chlorine and control cross-contamination during immersion chill of broiler carcasses.

    PubMed

    Schambach, B T; Berrang, M E; Harrison, M A; Meinersmann, R J

    2014-09-01

    Immersion chilling of broiler carcasses can be a site for cross-contamination between the occasional highly contaminated carcass and those that are co-chilled. Chlorine is often used as an antimicrobial but can be overcome by organic material. A proprietary chlorine stabilizer (T-128) based on phosphoric acid-propylene glycol was tested as a chill tank additive in experiments simulating commercial broiler chilling. In bench-scale experiments, 0.5% T-128 was compared with plain water (control), 50 ppm of chlorine, and the combination of 0.5% T-128 with 50 ppm of chlorine to control transfer of Salmonella and Campylobacter from inoculated wing drummettes to co-chilled uninoculated drummettes. Both chlorine and T-128 lessened cross-contamination with Salmonella (P < 0.05); T-128 and T-128 with chlorine were significantly more effective (P < 0.05) than the control or plain chlorine for control of Campylobacter. T-128 treatments were noted to have a pH of less than 4.0; an additional experiment demonstrated that the antimicrobial effect of T-128 was not due merely to a lower pH. In commercial broiler chilling, a pH close to 6.0 is preferred to maximize chlorine effectiveness, while maintaining water-holding capacity of the meat. In a set of pilot-scale experiments with T-128, a near-ideal pH of 6.3 was achieved by using tap water instead of the distilled water used in bench-scale experiments. Pilot-scale chill tanks were used to compare the combination of 0.5% T-128 and 50 ppm of chlorine with 50 ppm of plain chlorine for control of cross-contamination between whole carcasses inoculated with Salmonella and Campylobacter and co-chilled uninoculated carcasses. The T-128 treatment resulted in significantly less crosscontamination by either direct contact or water transfer with both organisms compared with plain chlorine treatment. T-128 may have use in commercial broiler processing to enhance the effectiveness of chlorine in processing water. PMID:25198851

  11. Chemical additive to enhance antimicrobial efficacy of chlorine and control cross-contamination during immersion chill of broiler carcasses.

    PubMed

    Schambach, B T; Berrang, M E; Harrison, M A; Meinersmann, R J

    2014-09-01

    Immersion chilling of broiler carcasses can be a site for cross-contamination between the occasional highly contaminated carcass and those that are co-chilled. Chlorine is often used as an antimicrobial but can be overcome by organic material. A proprietary chlorine stabilizer (T-128) based on phosphoric acid-propylene glycol was tested as a chill tank additive in experiments simulating commercial broiler chilling. In bench-scale experiments, 0.5% T-128 was compared with plain water (control), 50 ppm of chlorine, and the combination of 0.5% T-128 with 50 ppm of chlorine to control transfer of Salmonella and Campylobacter from inoculated wing drummettes to co-chilled uninoculated drummettes. Both chlorine and T-128 lessened cross-contamination with Salmonella (P < 0.05); T-128 and T-128 with chlorine were significantly more effective (P < 0.05) than the control or plain chlorine for control of Campylobacter. T-128 treatments were noted to have a pH of less than 4.0; an additional experiment demonstrated that the antimicrobial effect of T-128 was not due merely to a lower pH. In commercial broiler chilling, a pH close to 6.0 is preferred to maximize chlorine effectiveness, while maintaining water-holding capacity of the meat. In a set of pilot-scale experiments with T-128, a near-ideal pH of 6.3 was achieved by using tap water instead of the distilled water used in bench-scale experiments. Pilot-scale chill tanks were used to compare the combination of 0.5% T-128 and 50 ppm of chlorine with 50 ppm of plain chlorine for control of cross-contamination between whole carcasses inoculated with Salmonella and Campylobacter and co-chilled uninoculated carcasses. The T-128 treatment resulted in significantly less crosscontamination by either direct contact or water transfer with both organisms compared with plain chlorine treatment. T-128 may have use in commercial broiler processing to enhance the effectiveness of chlorine in processing water.

  12. Integrated Microfluidic Membrane Transistor Utilizing Chemical Information for On-Chip Flow Control.

    PubMed

    Frank, Philipp; Schreiter, Joerg; Haefner, Sebastian; Paschew, Georgi; Voigt, Andreas; Richter, Andreas

    2016-01-01

    Microfluidics is a great enabling technology for biology, biotechnology, chemistry and general life sciences. Despite many promising predictions of its progress, microfluidics has not reached its full potential yet. To unleash this potential, we propose the use of intrinsically active hydrogels, which work as sensors and actuators at the same time, in microfluidic channel networks. These materials transfer a chemical input signal such as a substance concentration into a mechanical output. This way chemical information is processed and analyzed on the spot without the need for an external control unit. Inspired by the development electronics, our approach focuses on the development of single transistor-like components, which have the potential to be used in an integrated circuit technology. Here, we present membrane isolated chemical volume phase transition transistor (MIS-CVPT). The device is characterized in terms of the flow rate from source to drain, depending on the chemical concentration in the control channel, the source-drain pressure drop and the operating temperature.

  13. Integrated Microfluidic Membrane Transistor Utilizing Chemical Information for On-Chip Flow Control

    PubMed Central

    Frank, Philipp; Schreiter, Joerg; Haefner, Sebastian; Paschew, Georgi; Voigt, Andreas; Richter, Andreas

    2016-01-01

    Microfluidics is a great enabling technology for biology, biotechnology, chemistry and general life sciences. Despite many promising predictions of its progress, microfluidics has not reached its full potential yet. To unleash this potential, we propose the use of intrinsically active hydrogels, which work as sensors and actuators at the same time, in microfluidic channel networks. These materials transfer a chemical input signal such as a substance concentration into a mechanical output. This way chemical information is processed and analyzed on the spot without the need for an external control unit. Inspired by the development electronics, our approach focuses on the development of single transistor-like components, which have the potential to be used in an integrated circuit technology. Here, we present membrane isolated chemical volume phase transition transistor (MIS-CVPT). The device is characterized in terms of the flow rate from source to drain, depending on the chemical concentration in the control channel, the source-drain pressure drop and the operating temperature. PMID:27571209

  14. Integrated Microfluidic Membrane Transistor Utilizing Chemical Information for On-Chip Flow Control.

    PubMed

    Frank, Philipp; Schreiter, Joerg; Haefner, Sebastian; Paschew, Georgi; Voigt, Andreas; Richter, Andreas

    2016-01-01

    Microfluidics is a great enabling technology for biology, biotechnology, chemistry and general life sciences. Despite many promising predictions of its progress, microfluidics has not reached its full potential yet. To unleash this potential, we propose the use of intrinsically active hydrogels, which work as sensors and actuators at the same time, in microfluidic channel networks. These materials transfer a chemical input signal such as a substance concentration into a mechanical output. This way chemical information is processed and analyzed on the spot without the need for an external control unit. Inspired by the development electronics, our approach focuses on the development of single transistor-like components, which have the potential to be used in an integrated circuit technology. Here, we present membrane isolated chemical volume phase transition transistor (MIS-CVPT). The device is characterized in terms of the flow rate from source to drain, depending on the chemical concentration in the control channel, the source-drain pressure drop and the operating temperature. PMID:27571209

  15. Responses of secondary chemicals in sugar maple (Acer saccharum) seedlings to UV-B, springtime warming and nitrogen additions.

    PubMed

    Sager, E P S; Hutchinson, T C

    2006-10-01

    Anticipated effects of climate change involve complex interactions in the field. To assess the effects of springtime warming, ambient ultraviolet-B radiation (UV-B) and nitrogen fertilization on the foliar chemistry and herbivore activity of native sugar maple (Acer saccharum Marsh.) seedlings, we carried out a field experiment for 2 years at two sugar maple forests growing on soils of contrasting acidity. At the Oliver site, soils are derived from a strongly calcareous till, whereas the naturally acidic soils and base-poor soils of the Haliburton site are derived from the largely granitic Precambrian Shield. At both sites, removal of ambient UV-B led to increases in chlorogenic acid and some flavonoids and reduced herbivore activity. At Haliburton, ammonium nitrate fertilization led to further increases in foliar manganese (Mn), whereas at Oliver there were no such changes. Nitrogen additions led to decreases in the concentrations of some flavonoids at both sites, but seedlings at Oliver had significantly higher concentrations of flavonoids and chlorogenic acid than seedlings at Haliburton. We suggest that this could be associated with increased mobilization of Mn due to increased soil acidity, which interferes with the role of calcium (Ca) in the phenolic biosynthetic pathway. It appears that the composition of the forest soil governs the response of seedlings when they are exposed to abiotic stressors.

  16. Delicious Chemicals.

    ERIC Educational Resources Information Center

    Barry, Dana M.

    This paper presents an approach to chemistry and nutrition that focuses on food items that people consider delicious. Information is organized according to three categories of food chemicals that provide energy to the human body: (1) fats and oils; (2) carbohydrates; and (3) proteins. Minerals, vitamins, and additives are also discussed along with…

  17. Effect of addition of nano-hydroxyapatite on physico-chemical and antibiofilm properties of calcium silicate cements

    PubMed Central

    GUERREIRO-TANOMARU, Juliane Maria; VÁZQUEZ-GARCÍA, Fernando Antonio; BOSSO-MARTELO, Roberta; BERNARDI, Maria Inês Basso; FARIA, Gisele; TANOMARU, Mario

    2016-01-01

    ABSTRACT Objective Mineral Trioxide Aggregate (MTA) is a calcium silicate cement composed of Portland cement (PC) and bismuth oxide. Hydroxyapatite has been incorporated to enhance mechanical and biological properties of dental materials. This study evaluated physicochemical and mechanical properties and antibiofilm activity of MTA and PC associated with zirconium oxide (ZrO2) and hydroxyapatite nanoparticles (HAn). Material and Methods White MTA (Angelus, Brazil); PC (70%)+ZrO2 (30%); PC (60%)+ZrO2 (30%)+HAn (10%); PC (50%)+ZrO2 (30%)+HAn (20%) were evaluated. The pH was assessed by a digital pH-meter and solubility by mass loss. Setting time was evaluated by using Gilmore needles. Compressive strength was analyzed by mechanical test. Samples were radiographed alongside an aluminum step wedge to evaluate radiopacity. For the antibiofilm evaluation, materials were placed in direct contact with E. faecalis biofilm induced on dentine blocks. The number of colony-forming units (CFU mL-1) in the remaining biolfilm was evaluated. The results were submitted to ANOVA and the Tukey test, with 5% significance. Results There was no difference in pH levels of PC+ZrO2, PC+ZrO2+HAn (10%) and PC+ZrO2+HAn (20%) (p>0.05) and these cements presented higher pH levels than MTA (p<0.05). The highest solubility was observed in PC+ZrO2+HAn (10%) and PC+ZrO2+HAn (20%) (p<0.05). MTA had the shortest initial setting time (p<0.05). All the materials showed radiopacity higher than 3 mmAl. PC+ZrO2 and MTA had the highest compressive strength (p<0.05). Materials did not completely neutralize the bacterial biofilm, but the association with HAn provided greater bacterial reduction than MTA and PC+ZrO2 (p<0.05) after the post-manipulation period of 2 days. Conclusions The addition of HAn to PC associated with ZrO2 harmed the compressive strength and solubility. On the other hand, HAn did not change the pH and the initial setting time, but improved the radiopacity (HAn 10%), the final setting time

  18. C4F8O/O2/N-based Additive Gases for Silicon Nitride Plasma Enhanced Chemical Vapor Deposition Chamber Cleaning with Low Global Warming Potentials

    NASA Astrophysics Data System (ADS)

    Kim, Ji Hwang; Bae, Jeong Woon; Oh, Chang Hyun; Kim, Ki Joon; Lee, Nae Eung; Yeom, Geun Young

    2002-11-01

    In this study, N2O and NO were added as additive gases to C4F8O/O2 for plasma enhanced chemical vapor deposition (PECVD) silicon nitride chamber cleaning and their effects on the emission properties of perfluorocarbon compounds (PFCs) were investigated. The cleaning rate, destruction and removal efficiencies (DREs), and million metric tons of carbon equivalent (MMTCE) were studied as a function of flow rates of PFCs and additive gases. The use of C4F8O/O2 alone showed the highest cleaning rate and the lowest emission properties at the cleaning condition of 20%C4F8O/80%O2, working pressure of 500 mTorr, and 13.56 MHz rf power of 350 W. By the addition of about 20% NO or 20% N2O to the optimized C4F8O/O2, the additional reduction of MMTCE higher than 50% could be obtained. The addition of NO resulted in lower MMTCE compared to that in the case of the addition of N2O mostly due to the higher silicon nitride cleaning rate in the latter case.

  19. Terrestrial chemical spill information system through remote sensing, GIS, and V.B. 6.0

    NASA Astrophysics Data System (ADS)

    Dwarakish, G. S.; Jeba S., Angel; Srinikethan, G.; Natesan, Usha

    2009-01-01

    India has made remarkable progress in creating a modern and diversified industrial base, since its independence. Most of the refineries, petrochemical and fertilizer industries are located in the coastal zone and catered by 12 major ports along the 7500 km length of Indian coastline. Since, transportation of crude oil and POL products from ports to refineries are mostly by pipelines, rail/ road, besides some quantity by barge/ ships along the coast, there will be chances of oil spill/leakage. Managing these events before and during their occurrence is imperative to the protection of people and natural resources. The present study was carried out with a view to develop Terrestrial Chemical Spill Information System [TCSIS], using Remote Sensing [RS], GIS and VB 6.0., for the Mangalore coastal zone industrial area of Dakshina Kannada district, Karnataka state, along West Coast of India. The study area lies between 74°45'00'' to 74°52'30''E longitude and 12°52'30'' to 13°00'00''N latitude. The database of TCSIS consists of both conventional data and RS data, and analysed using ERDAS Imagine 9.0 and ArcGIS 8.3 software. Different thematic maps prepared include LU/LC map, drainage map, road and pipeline network map, slope map, Digital Elevation Model, relative risk maps and pipeline route for the transportation of hazardous chemicals from port to refinery. The TCSIS module developed using RS, GIS and V.B.6.0, characterizes the ability of a spilled chemical to immediately impact human health, natural resources, and incorporates these into an overall measure of terrestrial chemical risk and aids in planning, preventing and responding to a terrestrial chemical spill.

  20. Detection and characterisation of frauds in bovine meat in natura by non-meat ingredient additions using data fusion of chemical parameters and ATR-FTIR spectroscopy.

    PubMed

    Nunes, Karen M; Andrade, Marcus Vinícius O; Santos Filho, Antônio M P; Lasmar, Marcelo C; Sena, Marcelo M

    2016-08-15

    Concerns about meat authenticity are increasing recently, due to great fraud scandals. This paper analysed real samples (43 adulterated and 12 controls) originated from criminal networks dismantled by the Brazilian Police. This fraud consisted of injecting solutions of non-meat ingredients (NaCl, phosphates, carrageenan, maltodextrin) in bovine meat, aiming to increase its water holding capacity. Five physico-chemical variables were determined, protein, ash, chloride, sodium, phosphate. Additionally, infrared spectra were recorded. Supervised classification PLS-DA models were built with each data set individually, but the best model was obtained with data fusion, correctly detecting 91% of the adulterated samples. From this model, a variable selection based on the highest VIPscores was performed and a new data fusion model was built with only one chemical variable, providing slightly lower predictions, but a good cost/performance ratio. Finally, some of the selected infrared bands were specifically associated to the presence of adulterants NaCl, tripolyphosphate and carrageenan.

  1. Effect of additive gases and injection methods on chemical dry etching of silicon nitride, silicon oxynitride, and silicon oxide layers in F{sub 2} remote plasmas

    SciTech Connect

    Yun, Y. B.; Park, S. M.; Kim, D. J.; Lee, N.-E.; Kim, K. S.; Bae, G. H.

    2007-07-15

    The authors investigated the effects of various additive gases and different injection methods on the chemical dry etching of silicon nitride, silicon oxynitride, and silicon oxide layers in F{sub 2} remote plasmas. N{sub 2} and N{sub 2}+O{sub 2} gases in the F{sub 2}/Ar/N{sub 2} and F{sub 2}/Ar/N{sub 2}/O{sub 2} remote plasmas effectively increased the etch rate of the layers. The addition of direct-injected NO gas increased the etch rates most significantly. NO radicals generated by the addition of N{sub 2} and N{sub 2}+O{sub 2} or direct-injected NO molecules contributed to the effective removal of nitrogen and oxygen in the silicon nitride and oxide layers, by forming N{sub 2}O and NO{sub 2} by-products, respectively, and thereby enhancing SiF{sub 4} formation. As a result of the effective removal of the oxygen, nitrogen, and silicon atoms in the layers, the chemical dry etch rates were enhanced significantly. The process regime for the etch rate enhancement of the layers was extended at elevated temperature.

  2. Superhydrophobic powder additives to enhance chemical agent resistant coating systems for military equipment for the U.S. Marine Corps (USMC) Corrosion Prevention and Control (CPAC) Program

    SciTech Connect

    Pawel, Steven J.; Armstrong, Beth L.; Haynes, James A.

    2015-07-01

    The primary goal of the CPAC program at ORNL was to explore the feasibility of introducing various silica-based superhydrophobic (SH) powder additives as a way to improve the corrosion resistance of US Department of Defense (DOD) military-grade chemical agent resistant coating (CARC) systems. ORNL had previously developed and patented several SH technologies of interest to the USMC, and one of the objectives of this program was to identify methods to incorporate these technologies into the USMC’s corrosion-resistance strategy. This report discusses findings of the CPAC and their application.

  3. 43 CFR 3276.13 - What additional information must I give BLM in the monthly report for flash and dry steam...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... BLM in the monthly report for flash and dry steam facilities? 3276.13 Section 3276.13 Public Lands... What additional information must I give BLM in the monthly report for flash and dry steam facilities? In addition to the regular monthly report information required by § 3276.12, send to BLM: (a)...

  4. 43 CFR 3276.13 - What additional information must I give BLM in the monthly report for flash and dry steam...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... BLM in the monthly report for flash and dry steam facilities? 3276.13 Section 3276.13 Public Lands... What additional information must I give BLM in the monthly report for flash and dry steam facilities? In addition to the regular monthly report information required by § 3276.12, send to BLM: (a)...

  5. 43 CFR 3276.13 - What additional information must I give BLM in the monthly report for flash and dry steam...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... BLM in the monthly report for flash and dry steam facilities? 3276.13 Section 3276.13 Public Lands... What additional information must I give BLM in the monthly report for flash and dry steam facilities? In addition to the regular monthly report information required by § 3276.12, send to BLM: (a)...

  6. 43 CFR 3276.13 - What additional information must I give BLM in the monthly report for flash and dry steam...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... BLM in the monthly report for flash and dry steam facilities? 3276.13 Section 3276.13 Public Lands... What additional information must I give BLM in the monthly report for flash and dry steam facilities? In addition to the regular monthly report information required by § 3276.12, send to BLM: (a)...

  7. Effects of N{sub 2}O gas addition on the properties of ZnO films grown by catalytic reaction-assisted chemical vapor deposition

    SciTech Connect

    Yasui, Kanji Morioka, Makoto; Kanauchi, Shingo; Ohashi, Yuki; Kato, Takahiro; Tamayama, Yasuhiro

    2015-11-15

    The influence of N{sub 2}O gas addition on the properties of zinc oxide (ZnO) films grown on a-plane (11–20) sapphire (a-Al{sub 2}O{sub 3}) substrates was investigated, using a chemical vapor deposition method based on the reaction between dimethylzinc and high-temperature H{sub 2}O produced by a catalytic H{sub 2}-O{sub 2} reaction on platinum (Pt) nanoparticles. The addition of N{sub 2}O was found to increase the size of the crystalline facets and to improve the crystal orientation along the c-axis. The electron mobility at 290 K was also increased to 234 cm{sup 2}/Vs following the addition of N{sub 2}O gas at a pressure of 3.2 × 10{sup −3 }Pa. In addition, the minimum full width at half maximum of the most intense photoluminescence peak derived from neutral donor bound excitons at 10 K decreased to 0.6 meV by the addition of N{sub 2}O gas at a pressure of 3.1 × 10{sup −2 }Pa.

  8. [Effects of understory removal and nitrogen addition on the soil chemical and biological properties of Pinus sylvestris var. mongolica plantation in Keerqin Sandy Land].

    PubMed

    Lin, Gui-Gang; Zhao, Qiong; Zhao, Lei; Li, Hui-Chao; Zeng, De-Hui

    2012-05-01

    A full factorial experiment was conducted to study the effects of understory removal and nitrogen addition (8 g x m(-2)) on the soil NO(3-)-N and NH(4+)-N concentrations, potential net nitrogen mineralization rate (PNM) and nitrification rate (PNN), microbial biomass C (MBC) and N (MBN), MBC/MBN, urease and acid phosphomonoesterase activities, and Olsen-P concentration in a Pinus sylvestris var. mongolica plantation in Keerqin Sandy Land during a growth season. Understory removal decreased the soil NH(4+)-N concentration, PNM, MBC, and MBN/MBN significantly, increased the soil Olsen-P concentration, but had little effects on the soil NO(3-)-N concentration, PNN, and urease and acid phosphomonoesterase activities. Nitrogen addition increased the soil NO(3-)-N concentration, PNM and PNN significantly, but had little effects on the other test properties. The interaction between understory removal and nitrogen addition had significant effects on the soil NH(4+)-N concentration, but little effects on the soil NO(3-)-N concentration. However, the soil NO(3-)-N concentration in the plots of understory removal with nitrogen addition was increased by 27%, compared with the plots of nitrogen addition alone, which might lead to the leaching of NO3-. It was suggested that understory vegetation could play an important role in affecting the soil chemical and biological properties in Mongolian pine plantations, and hence, the importance of understory vegetation should not be neglected when the forest management and restoration were implemented. PMID:22919826

  9. Predicting metabolic pathways of small molecules and enzymes based on interaction information of chemicals and proteins.

    PubMed

    Gao, Yu-Fei; Chen, Lei; Cai, Yu-Dong; Feng, Kai-Yan; Huang, Tao; Jiang, Yang

    2012-01-01

    Metabolic pathway analysis, one of the most important fields in biochemistry, is pivotal to understanding the maintenance and modulation of the functions of an organism. Good comprehension of metabolic pathways is critical to understanding the mechanisms of some fundamental biological processes. Given a small molecule or an enzyme, how may one identify the metabolic pathways in which it may participate? Answering such a question is a first important step in understanding a metabolic pathway system. By utilizing the information provided by chemical-chemical interactions, chemical-protein interactions, and protein-protein interactions, a novel method was proposed by which to allocate small molecules and enzymes to 11 major classes of metabolic pathways. A benchmark dataset consisting of 3,348 small molecules and 654 enzymes of yeast was constructed to test the method. It was observed that the first order prediction accuracy evaluated by the jackknife test was 79.56% in identifying the small molecules and enzymes in a benchmark dataset. Our method may become a useful vehicle in predicting the metabolic pathways of small molecules and enzymes, providing a basis for some further analysis of the pathway systems.

  10. Enhancement of infrared spectral images for maximizing chemical information by minimizing baseline interferences.

    PubMed

    Bu, Dongsheng; Huffman, Scott W; Seelenbinder, John A; Brown, Chris W

    2005-05-01

    The popularity of spectral images in many areas of analysis has greatly increased during the last decade due to the development of charge-coupled device (CCD) and infrared sensitive cameras. Large amounts of spatial information can be obtained in short periods of time. The general goal in analytical chemistry is to convert spectral images into chemical images, which show the spatial locations of various chemical components. Self-modeling multivariate curve resolution methods can be used to extract pure component spectra from the mixture spectra in images and produce chemical images. However, there is a difficulty in processing infrared spectral images due to large pixel-to-pixel baseline variations. Herein, a method for minimizing baseline interferences using fast Fourier transform (FFT) filtering in both the spectral and spatial domains is discussed. The methodology is demonstrated on a microscopic sample of butter contaminated with non-pathogenic E. coli and on a cross-sectional sample of rabbit aorta containing plaque. The processing to reduce baseline effects improved the spatial resolution without compromising the spectral resolution.

  11. The smell of change: warming affects species interactions mediated by chemical information.

    PubMed

    Sentis, Arnaud; Ramon-Portugal, Felipe; Brodeur, Jacques; Hemptinne, Jean-Louis

    2015-10-01

    Knowledge of how temperature influences an organism's physiology and behaviour is of paramount importance for understanding and predicting the impacts of climate change on species' interactions. While the behaviour of many organisms is driven by chemical information on which they rely on to detect resources, conspecifics, natural enemies and competitors, the effects of temperature on infochemical-mediated interactions remain largely unexplored. Here, we experimentally show that temperature strongly influences the emission of infochemicals by ladybeetle larvae, which, in turn, modifies the oviposition behaviour of conspecific females. Temperature also directly affects female perception of infochemicals and their oviposition behaviour. Our results suggest that temperature-mediated effects on chemical communication can influence flows across system boundaries (e.g. immigration and emigration) and thus alter the dynamics and stability of ecological networks. We therefore argue that investigating the effects of temperature on chemical communication is a crucial step towards a better understanding of the functioning of ecological communities facing rapid environmental changes. PMID:25820469

  12. Studies on nano-additive for the substitution of hazardous chemical substances in antifouling coatings for the protection of ship hulls.

    PubMed

    Zhao, Xiaodong; Fan, Weijie; Duan, Jizhou; Hou, Baorong

    2014-07-01

    Adhesion and growth of biofouling organisms have severe influence on the reliability, service life and environmental adaptability of marine ships. Based on the bactericidal capacity of cuprous oxide and photochemical effect of nano-additive, environment-friendly and efficient marine antifouling paints were prepared in this study. The evaluation of the antifouling paints was carried out by the laboratory method using bacteria and phytoplanktonic microorganisms as target organisms, as well as measurements with panels in shallow submergence in natural seawater. Results showed good agreement of all the tests, indicating the remarkable antifouling performance of the paints. To our knowledge, this was one of the first systematic studies on effects of nano-additive for the substitution of hazardous chemical substances in antifouling coatings for the protection of ship hulls by measurements on bacterial inhibition, algal adhesion and growth of large organisms. PMID:25016277

  13. The effect of terebinth (Pistacia terebinthus L.) coffee addition on the chemical and physical characteristics, colour values, organic acid profiles, mineral compositions and sensory properties of ice creams.

    PubMed

    Yüksel, Arzu Kavaz; Şat, Ihsan Güngör; Yüksel, Mehmet

    2015-12-01

    The aim of this research was to evaluate the effect of terebinth (Pistacia terebinthus L.) coffee addition (0.5, 1 and 2 %) on the chemical and physical properties, colour values, organic acid profiles, mineral contents and sensory characteristics of ice creams. The total solids, fat, titratable acidity, viscosity, first dripping time and complete melting time values, a (*) and b (*) colour properties, citric, lactic, acetic and butyric acid levels and Ca, Cu, Mg, Fe, K, Zn and Na concentrations of ice creams showed an increase with the increment of terebinth coffee amount, while protein, pH, L (*), propionic acid and orotic acid values decreased. However, Al and malic acid were not detected in any of the samples. The overall acceptability scores of the sensory properties showed that the addition of 1 % terebinth coffee to the ice cream was more appreciated by the panellists.

  14. The effect of terebinth (Pistacia terebinthus L.) coffee addition on the chemical and physical characteristics, colour values, organic acid profiles, mineral compositions and sensory properties of ice creams.

    PubMed

    Yüksel, Arzu Kavaz; Şat, Ihsan Güngör; Yüksel, Mehmet

    2015-12-01

    The aim of this research was to evaluate the effect of terebinth (Pistacia terebinthus L.) coffee addition (0.5, 1 and 2 %) on the chemical and physical properties, colour values, organic acid profiles, mineral contents and sensory characteristics of ice creams. The total solids, fat, titratable acidity, viscosity, first dripping time and complete melting time values, a (*) and b (*) colour properties, citric, lactic, acetic and butyric acid levels and Ca, Cu, Mg, Fe, K, Zn and Na concentrations of ice creams showed an increase with the increment of terebinth coffee amount, while protein, pH, L (*), propionic acid and orotic acid values decreased. However, Al and malic acid were not detected in any of the samples. The overall acceptability scores of the sensory properties showed that the addition of 1 % terebinth coffee to the ice cream was more appreciated by the panellists. PMID:26604374

  15. Studies on nano-additive for the substitution of hazardous chemical substances in antifouling coatings for the protection of ship hulls.

    PubMed

    Zhao, Xiaodong; Fan, Weijie; Duan, Jizhou; Hou, Baorong

    2014-07-01

    Adhesion and growth of biofouling organisms have severe influence on the reliability, service life and environmental adaptability of marine ships. Based on the bactericidal capacity of cuprous oxide and photochemical effect of nano-additive, environment-friendly and efficient marine antifouling paints were prepared in this study. The evaluation of the antifouling paints was carried out by the laboratory method using bacteria and phytoplanktonic microorganisms as target organisms, as well as measurements with panels in shallow submergence in natural seawater. Results showed good agreement of all the tests, indicating the remarkable antifouling performance of the paints. To our knowledge, this was one of the first systematic studies on effects of nano-additive for the substitution of hazardous chemical substances in antifouling coatings for the protection of ship hulls by measurements on bacterial inhibition, algal adhesion and growth of large organisms.

  16. Information performances and illative sequences: Sequential organization of explanations of chemical phase equilibrium

    NASA Astrophysics Data System (ADS)

    Brown, Nathaniel James Swanton

    While there is consensus that conceptual change is surprisingly difficult, many competing theories of conceptual change co-exist in the literature. This dissertation argues that this discord is partly the result of an inadequate account of the unwritten rules of human social interaction that underlie the field's preferred methodology---semi-structured interviewing. To better understand the contributions of interaction during explanations, I analyze eight undergraduate general chemistry students as they attempt to explain to various people, for various reasons, why phenomena involving chemical phase equilibrium occur. Using the methods of interaction analysis, I characterize the unwritten, but systematic, rules that these participants follow as they explain. The result is a description of the contributions of interaction to explaining. Each step in each explanation is a jointly performed expression of a subject-predicate relation, an interactive accomplishment I call an information performance (in-form, for short). Unlike clauses, in-forms need not have a coherent grammatical structure. Unlike speaker turns, in-forms have the clear function of expressing information. Unlike both clauses and speaker turns, in-forms are a co-construction, jointly performed by both the primary speaker and the other interlocutor. The other interlocutor strongly affects the form and content of each explanation by giving or withholding feedback at the end of each in-form, moments I call feedback-relevant places. While in-forms are the bricks out of which the explanation is constructed, they are secured by a series of inferential links I call an illative sequence. Illative sequences are forward-searching, starting with a remembered fact or observation and following a chain of inferences in the hope it leads to the target phenomenon. The participants treat an explanation as a success if the illative sequence generates an in-form that describes the phenomenon. If the illative sequence does

  17. The effects of practice on speed of information processing using the Adjusting-Paced Serial Addition Test (Adjusting-PSAT) and the Computerized Tests of Information Processing (CTIP).

    PubMed

    Baird, B J; Tombaugh, Thomas N; Francis, M

    2007-01-01

    Three experiments were conducted to determine the effects of practice on the Adjusting-Paced Serial Addition Task (Adjusting-PSAT) (Tombaugh, 1999) and the Computerized Tests of Information Processing (CTIP) (Tombaugh & Rees, 2000). The Adjusting-PSAT is a computerized modification of the Paced Auditory Serial Addition Test (PASAT) (Gronwall, 1977) that makes the interval between digits contingent on the correctness of the response. This titration procedure permits a threshold value to be derived that represents the shortest presentation interval in which a person can process the digits to produce the correct sum. The CTIP consists of three reaction time tests that are progressively more difficult. Results showed that robust practice effects occurred with the Adjusting-PSAT, with the greatest increase in performance occurring on the first retest trial. Practice effects were equally prominent regardless of whether the first retest trial occurred 20A min, 1 week, or 3 months after the first administration. These gains were maintained for periods up to 6 months and were independent of modality of presentation (visual or auditory) and type of number list (easy or hard). In contrast to the findings with the Adjusting-PSAT, only minimal practice effects were observed with the CTIP. The major clinical implication of the study is that the high reliability coefficients for the CTIP, the lack of anxiety associated with its administration, and its insensitivity to variables such as numerical and verbal ability make the CTIP ideally suited for the serial evaluation of cognitive status. These characteristics also make the CTIP a viable alternative to the Adjusting-PSAT or PASAT for measuring speed of information processing. If the Adjusting-PSAT is administered repeatedly in clinical evaluations, a "dual baseline" or "run in" procedure should be used, with the second administration serving as the baseline measurement. PMID:17523883

  18. Setting the most robust effluent level under severe uncertainty: application of information-gap decision theory to chemical management.

    PubMed

    Yokomizo, Hiroyuki; Naito, Wataru; Tanaka, Yoshinari; Kamo, Masashi

    2013-11-01

    Decisions in ecological risk management for chemical substances must be made based on incomplete information due to uncertainties. To protect the ecosystems from the adverse effect of chemicals, a precautionary approach is often taken. The precautionary approach, which is based on conservative assumptions about the risks of chemical substances, can be applied selecting management models and data. This approach can lead to an adequate margin of safety for ecosystems by reducing exposure to harmful substances, either by reducing the use of target chemicals or putting in place strict water quality criteria. However, the reduction of chemical use or effluent concentrations typically entails a financial burden. The cost effectiveness of the precautionary approach may be small. Hence, we need to develop a formulaic methodology in chemical risk management that can sufficiently protect ecosystems in a cost-effective way, even when we do not have sufficient information for chemical management. Information-gap decision theory can provide the formulaic methodology. Information-gap decision theory determines which action is the most robust to uncertainty by guaranteeing an acceptable outcome under the largest degree of uncertainty without requiring information about the extent of parameter uncertainty at the outset. In this paper, we illustrate the application of information-gap decision theory to derive a framework for setting effluent limits of pollutants for point sources under uncertainty. Our application incorporates a cost for reduction in pollutant emission and a cost to wildlife species affected by the pollutant. Our framework enables us to settle upon actions to deal with severe uncertainty in ecological risk management of chemicals.

  19. Educational and Commercial Utilization of a Chemical Information Center. Biannual Summary, June 25, 1968 to June 25, 1970.

    ERIC Educational Resources Information Center

    Schwartz, Eugene S.; And Others

    The design, implementation and operation of the Computer Search Center of IIT Research Institute, an information center to educate and link industry and academic institutions to chemical and other scientific information systems, is described. Format conversion, profile input, search and output programs developed over a two-year period are detailed…

  20. Using phylogenetic information and chemical properties to predict species tolerances to pesticides.

    PubMed

    Guénard, Guillaume; Carsten von der Ohe, Peter; Carlisle Walker, Steven; Lek, Sovan; Legendre, Pierre

    2014-08-22

    Direct estimation of species' tolerance to pesticides and other toxic organic substances is a combinatorial problem, because of the large number of species-substance pairs. We propose a statistical modelling approach to predict tolerances associated with untested species-substance pairs, by using models fitted to tested pairs. This approach is based on the phylogeny of species and physico-chemical descriptors of pesticides, with both kinds of information combined in a bilinear model. This bilinear modelling approach predicts tolerance in untested species-compound pairs based on the facts that closely related species often respond similarly to toxic compounds and that chemically similar compounds often have similar toxic effects. The three tolerance models (median lethal concentration after 96 h) used up to 25 aquatic animal species and up to nine pesticides (organochlorines, organophosphates and carbamates). Phylogeny was estimated using DNA sequences, while the pesticides were described by their mode of toxic action and their octanol-water partition coefficients. The models explained 77-84% of the among-species variation in tolerance (log10 LC50). In cross-validation, 84-87% of the predicted tolerances for individual species were within a factor of 10 of the observed values. The approach can also be used to model other species response to multivariate stress factors.

  1. Social learning of predators in the dark: understanding the role of visual, chemical and mechanical information

    PubMed Central

    Manassa, R. P.; McCormick, M. I.; Chivers, D. P.; Ferrari, M. C. O.

    2013-01-01

    The ability of prey to observe and learn to recognize potential predators from the behaviour of nearby individuals can dramatically increase survival and, not surprisingly, is widespread across animal taxa. A range of sensory modalities are available for this learning, with visual and chemical cues being well-established modes of transmission in aquatic systems. The use of other sensory cues in mediating social learning in fishes, including mechano-sensory cues, remains unexplored. Here, we examine the role of different sensory cues in social learning of predator recognition, using juvenile damselfish (Amphiprion percula). Specifically, we show that a predator-naive observer can socially learn to recognize a novel predator when paired with a predator-experienced conspecific in total darkness. Furthermore, this study demonstrates that when threatened, individuals release chemical cues (known as disturbance cues) into the water. These cues induce an anti-predator response in nearby individuals; however, they do not facilitate learnt recognition of the predator. As such, another sensory modality, probably mechano-sensory in origin, is responsible for information transfer in the dark. This study highlights the diversity of sensory cues used by coral reef fishes in a social learning context. PMID:23804616

  2. Improvement in human health risk assessment utilizing site- and chemical-specific information: a case study.

    PubMed

    Del Pup, J; Kmiecik, J; Smith, S; Reitman, F

    1996-10-28

    This paper provides results of an effort to use site- and chemical-specific data and other factors to characterize and refine risk estimates to a community. The refined assessment illustrated the influence of additional key variables on the risk estimates. Influence of variables associated with meteorological data and decay was relatively low. Influence of exposure assumptions was somewhat higher, approaching an order of magnitude. Of the variables examined, the butadiene slope factor assumption had the greatest impact, contributing nearly three orders of magnitude to the risk estimates separating the Best and Worst Case scenarios. Monte Carlo analysis indicated a high level of uncertainty in the risk estimates. Risk estimates in this paper should be considered in comparison to the approximate 1 in 4 background fatal cancer risk in the US population. In all cases the risk would be zero if butadiene is not carcinogenic in humans at prevailing exposure levels.

  3. Spatial data in geographic information system format on agricultural chemical use, land use, cropping practices in the United States

    USGS Publications Warehouse

    Battaglin, W.A.; Goolsby, D.A.

    1995-01-01

    The spatial data in geographic information system format described in this report consist of estimates for all counties in the conterminous United States of the annual use of 96 herbicides in 1989; annual sales of nitrogen fertilizer, in tons, for 1985-91; and agricultural expenses, land use, chemical use, livestock holdings, and cropping practices in 1987. The source information, originally in tabular form, is summarized as digital polygon attribute data in the 18 geographic information system spatial data layers (coverages) provided. The information in these coverages can be used in estimating regional agricultural-chemical use or agricultural practices and in producing visual displays and mapping relative rates of agricultural-chemical use or agricultural practices across broad regions of the United States.

  4. Detection and characterisation of frauds in bovine meat in natura by non-meat ingredient additions using data fusion of chemical parameters and ATR-FTIR spectroscopy.

    PubMed

    Nunes, Karen M; Andrade, Marcus Vinícius O; Santos Filho, Antônio M P; Lasmar, Marcelo C; Sena, Marcelo M

    2016-08-15

    Concerns about meat authenticity are increasing recently, due to great fraud scandals. This paper analysed real samples (43 adulterated and 12 controls) originated from criminal networks dismantled by the Brazilian Police. This fraud consisted of injecting solutions of non-meat ingredients (NaCl, phosphates, carrageenan, maltodextrin) in bovine meat, aiming to increase its water holding capacity. Five physico-chemical variables were determined, protein, ash, chloride, sodium, phosphate. Additionally, infrared spectra were recorded. Supervised classification PLS-DA models were built with each data set individually, but the best model was obtained with data fusion, correctly detecting 91% of the adulterated samples. From this model, a variable selection based on the highest VIPscores was performed and a new data fusion model was built with only one chemical variable, providing slightly lower predictions, but a good cost/performance ratio. Finally, some of the selected infrared bands were specifically associated to the presence of adulterants NaCl, tripolyphosphate and carrageenan. PMID:27006208

  5. Increased pattern transfer fidelity of ZEP 520A during reactive ion etching through chemical modifications by additional dosing of the electron beam resist

    SciTech Connect

    Czaplewski, D. A.; Ocola, L. E.

    2011-01-01

    This article describes a postdevelopment, additional electron exposure to enhance the etch selectivity and improve pattern transfer fidelity of an electron beam resist, ZEP 520A, through chemical changes of the resist. After the critical features were patterned and developed, the resist was exposed at 5 kV accelerating voltage to a second dose of electrons ranging from 300 to 300,000 {micro}C/cm{sup 2}. The etch rate of the resist decreased by approximately 25% in a CHF{sub 3} and O{sub 2} plasma. More critically, the fidelity of the pattern transfer was improved. Infrared and Raman spectroscopies were used to characterize the resist before and after electron beam exposure for doses up to 3000 {micro}C/cm{sup 2}. The carbonyl bonding in the polymer showed significant changes after electron beam exposure that can be associated with improvement in the etch performance of this resist.

  6. Increased pattern transfer fidelity ZEP 520A during reactive ion etching through chemical modifications by additional dosing of the electron beam resist.

    SciTech Connect

    Czaplewski, D. A.; Ocola, L. E.

    2011-03-01

    This article describes a postdevelopment, additional electron exposure to enhance the etch selectivity and improve pattern transfer fidelity of an electron beam resist, ZEP 520A, through chemical changes of the resist. After the critical features were patterned and developed, the resist was exposed at 5 kV accelerating voltage to a second dose of electrons ranging from 300 to 300,000 {micro}C/cm{sup 2}. The etch rate of the resist decreased by approximately 25% in a CHF{sub 3} and O{sub 2} plasma. More critically, the fidelity of the pattern transfer was improved. Infrared and Raman spectroscopies were used to characterize the resist before and after electron beam exposure for doses up to 3000 {micro}C/cm{sup 2}. The carbonyl bonding in the polymer showed significant changes after electron beam exposure that can be associated with improvement in the etch performance of this resist.

  7. Surface molecular imprinting onto fluorescein-coated magnetic nanoparticlesvia reversible addition fragmentation chain transfer polymerization: A facile three-in-one system for recognition and separation of endocrine disrupting chemicals

    NASA Astrophysics Data System (ADS)

    Li, Ying; Dong, Cunku; Chu, Jia; Qi, Jingyao; Li, Xin

    2011-01-01

    In this study, we present a general protocol for the making of surface-imprinted magnetic fluorescence beads viareversible addition-fragmentation chain transfer polymerization. The resulting composites were characterized by X-ray diffraction analysis, transmission electron microscopy, scanning electron microscopy, fluorescence spectroscopy, Fourier transform infrared spectroscopy, and energy dispersive spectroscopy. The as-synthesized beads exhibited homogeneous polymer films (thickness of about 5.7 nm), spherical shape, high fluorescence intensity and magnetic property (Magnetization (Ms) = 3.67 emu g-1). The hybrids bind the original template 17β-estradiol with an appreciable selectivity over structurally related compounds. In addition, the resulting hybrids performed without obvious deterioration after five repeated cycles. This study therefore demonstrates the potential of molecularly imprinted polymers for the recognition and separation of endocrine disrupting chemicals.In this study, we present a general protocol for the making of surface-imprinted magnetic fluorescence beads viareversible addition-fragmentation chain transfer polymerization. The resulting composites were characterized by X-ray diffraction analysis, transmission electron microscopy, scanning electron microscopy, fluorescence spectroscopy, Fourier transform infrared spectroscopy, and energy dispersive spectroscopy. The as-synthesized beads exhibited homogeneous polymer films (thickness of about 5.7 nm), spherical shape, high fluorescence intensity and magnetic property (Magnetization (Ms) = 3.67 emu g-1). The hybrids bind the original template 17β-estradiol with an appreciable selectivity over structurally related compounds. In addition, the resulting hybrids performed without obvious deterioration after five repeated cycles. This study therefore demonstrates the potential of molecularly imprinted polymers for the recognition and separation of endocrine disrupting chemicals. Electronic

  8. Incorporating High-Throughput Exposure Predictions With Dosimetry-Adjusted In Vitro Bioactivity to Inform Chemical Toxicity Testing.

    PubMed

    Wetmore, Barbara A; Wambaugh, John F; Allen, Brittany; Ferguson, Stephen S; Sochaski, Mark A; Setzer, R Woodrow; Houck, Keith A; Strope, Cory L; Cantwell, Katherine; Judson, Richard S; LeCluyse, Edward; Clewell, Harvey J; Thomas, Russell S; Andersen, Melvin E

    2015-11-01

    We previously integrated dosimetry and exposure with high-throughput screening (HTS) to enhance the utility of ToxCast HTS data by translating in vitro bioactivity concentrations to oral equivalent doses (OEDs) required to achieve these levels internally. These OEDs were compared against regulatory exposure estimates, providing an activity-to-exposure ratio (AER) useful for a risk-based ranking strategy. As ToxCast efforts expand (ie, Phase II) beyond food-use pesticides toward a wider chemical domain that lacks exposure and toxicity information, prediction tools become increasingly important. In this study, in vitro hepatic clearance and plasma protein binding were measured to estimate OEDs for a subset of Phase II chemicals. OEDs were compared against high-throughput (HT) exposure predictions generated using probabilistic modeling and Bayesian approaches generated by the U.S. Environmental Protection Agency (EPA) ExpoCast program. This approach incorporated chemical-specific use and national production volume data with biomonitoring data to inform the exposure predictions. This HT exposure modeling approach provided predictions for all Phase II chemicals assessed in this study whereas estimates from regulatory sources were available for only 7% of chemicals. Of the 163 chemicals assessed in this study, 3 or 13 chemicals possessed AERs < 1 or < 100, respectively. Diverse bioactivities across a range of assays and concentrations were also noted across the wider chemical space surveyed. The availability of HT exposure estimation and bioactivity screening tools provides an opportunity to incorporate a risk-based strategy for use in testing prioritization.

  9. Methods of information geometry in computational system biology (consistency between chemical and biological evolution).

    PubMed

    Astakhov, Vadim

    2009-01-01

    Interest in simulation of large-scale metabolic networks, species development, and genesis of various diseases requires new simulation techniques to accommodate the high complexity of realistic biological networks. Information geometry and topological formalisms are proposed to analyze information processes. We analyze the complexity of large-scale biological networks as well as transition of the system functionality due to modification in the system architecture, system environment, and system components. The dynamic core model is developed. The term dynamic core is used to define a set of causally related network functions. Delocalization of dynamic core model provides a mathematical formalism to analyze migration of specific functions in biosystems which undergo structure transition induced by the environment. The term delocalization is used to describe these processes of migration. We constructed a holographic model with self-poetic dynamic cores which preserves functional properties under those transitions. Topological constraints such as Ricci flow and Pfaff dimension were found for statistical manifolds which represent biological networks. These constraints can provide insight on processes of degeneration and recovery which take place in large-scale networks. We would like to suggest that therapies which are able to effectively implement estimated constraints, will successfully adjust biological systems and recover altered functionality. Also, we mathematically formulate the hypothesis that there is a direct consistency between biological and chemical evolution. Any set of causal relations within a biological network has its dual reimplementation in the chemistry of the system environment.

  10. 36 CFR 1281.12 - What information must be provided to NARA for its report to Congress on a change or addition to a...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... provided to NARA for its report to Congress on a change or addition to a Presidential library facility... ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.12 What information must be provided to NARA for its report to Congress on a change or addition to a Presidential library facility? (a)...

  11. 36 CFR 1281.12 - What information must be provided to NARA for its report to Congress on a change or addition to a...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... provided to NARA for its report to Congress on a change or addition to a Presidential library facility... ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.12 What information must be provided to NARA for its report to Congress on a change or addition to a Presidential library facility? (a)...

  12. 36 CFR 1281.12 - What information must be provided to NARA for its report to Congress on a change or addition to a...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... provided to NARA for its report to Congress on a change or addition to a Presidential library facility... ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.12 What information must be provided to NARA for its report to Congress on a change or addition to a Presidential library facility? (a)...

  13. 36 CFR 1281.12 - What information must be provided to NARA for its report to Congress on a change or addition to a...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... provided to NARA for its report to Congress on a change or addition to a Presidential library facility... ADMINISTRATION NARA FACILITIES PRESIDENTIAL LIBRARY FACILITIES § 1281.12 What information must be provided to NARA for its report to Congress on a change or addition to a Presidential library facility? (a)...

  14. 76 FR 64366 - Notice of Proposed Information Collection for Public Comment: Additional On-Site Data Collection...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-18

    ... Collection for the Housing Choice Voucher Program Administrative Fee Study AGENCY: Office of the Policy... lists the following information: Title of Proposal: Housing Choice Voucher Program Administrative...

  15. An Overview of Worldwide Chemical Information Facilities and Resources; "A Precis." Prepared...for the Joint Study on the Communication of Scientific Information and on the Feasibility of a Worldwide Science Information System.

    ERIC Educational Resources Information Center

    International Council of Scientific Unions, Paris (France).

    The first section of this precis summarizes the general nature of the present chemical information systems of the world. The discussion is presented in four parts: (1) the primary literature, (2) secondary sources and services, (3) libraries and information centers and (4) other elements categorized as informal communications. The second section…

  16. Chemicals of military deployments: revisiting Gulf War Syndrome in light of new information.

    PubMed

    Brimfield, A A

    2012-01-01

    Despite the amount of hard work that has gone into elucidating a toxicological basis for Gulf War Illness, we do not appear to have reached a mechanistic understanding. Investigation of long-term low-level exposure as a basis does not seem to have provided an answer. Nor does the deployment-related toxic soup idea, where exposure to a mixture of toxic chemicals not usually encountered in the same physical vicinity, seems to have explained the symptoms developed by Gulf War Veterans. The idea that an overabundance of CNS acetylcholine leftover from excessive cholinesterase inhibition is at the basis of this syndrome is intellectually appealing and offers a level of neurochemical complexity that may be just beyond the reach of our technical understanding. But no one has yet assembled a coherent mechanism from it either. It seems reasonable that chemical warfare agents were involved. They were not included in early work because it was felt that the toxicant plumes produced during the destruction of stockpiled Iraqi chemical weapons had not been large enough to cause an exposure of US forces and those of our allies. That misconception was disproven, and it is now accepted that people could very well have been exposed to low levels of massive quantities of sarin, cyclosarin, and sulfur mustard. It also seems reasonable that excess acetylcholine or neurological consequences of its presence that we do not fully understand were involved. The combination of nerve agents and the insecticidal anticholinesterases plus the pyridostigmine bromide given prophylactically were probably sufficient to cause the problem. However, the most notable thing is the result of recent work on the toxic mechanism of sulfur mustard showing that it can inhibit the microsomal electron transport chain as a result of sulfonium ion reduction to carbon free radicals by NADPH-cytochrome P450 reductase. This information was not available during the work on Gulf War Illness. So this provides an

  17. Effects of water additions, chemical amendments, and plants on in situ measures of nutrient bioavailability in calcareous soils of southeastern Utah, USA

    USGS Publications Warehouse

    Miller, M.E.; Belnap, J.; Beatty, S.W.; Webb, B.L.

    2006-01-01

    We used ion-exchange resin bags to investigate effects of water additions, chemical amendments, and plant presence on in situ measures of nutrient bioavailability in conjunction with a study examining soil controls of ecosystem invasion by the exotic annual grass Bromus tectorum L. At five dryland sites in southeastern Utah, USA, resin bags were buried in experimental plots randomly assigned to combinations of two watering treatments (wet and dry), four chemical-amendment treatments (KCl, MgO, CaO, and no amendment), and four plant treatments (B. tectorum alone, the perennial bunchgrass Stipa hymenoides R. & S. alone, B. tectorum and S. hymenoides together, and no plants). Resin bags were initially buried in September 1997; replaced in January, April, and June 1998; and removed at the end of the study in October 1998. When averaged across watering treatments, plots receiving KCl applications had lower resin-bag NO 3- than plots receiving no chemical amendments during three of four measurement periods-probably due to NO 3- displacement from resin bags by Cl- ions. During the January-April period, KCl application in wet plots (but not dry plots) decreased resin-bag NH 4+ and increased resin-bag NO 3- . This interaction effect likely resulted from displacement of NH 4+ from resins by K+ ions, followed by nitrification and enhanced NO 3- capture by resin bags. In plots not receiving KCl applications, resin-bag NH 4+ was higher in wet plots than in dry plots during the same period. During the January-April period, resin-bag measures for carbonate-related ions HPO 42- , Ca2+, and Mn2+ tended to be greater in the presence of B. tectorum than in the absence of B. tectorum. This trend was evident only in wet plots where B. tectorum densities were much higher than in dry plots. We attribute this pattern to the mobilization of carbonate-associated ions by root exudates of B. tectorum. These findings indicate the importance of considering potential indirect effects of soil

  18. 40 CFR 711.6 - Chemical substances for which information is not required.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... enforceable consent agreement (ECA) developed under the procedures of 40 CFR part 790, or is the subject of an... is a living organism, and that meets the definition of microorganism at 40 CFR 725.3. Any chemical...) Naturally occurring chemical substances. Any naturally occurring chemical substance, as described in 40...

  19. 40 CFR 711.6 - Chemical substances for which information is not required.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) developed under the procedures of 40 CFR part 790, or is the subject of an order issued under TSCA section 5... living organism, and that meets the definition of microorganism at 40 CFR 725.3. Any chemical substance... occurring chemical substances. Any naturally occurring chemical substance, as described in 40 CFR...

  20. 40 CFR 711.6 - Chemical substances for which information is not required.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... enforceable consent agreement (ECA) developed under the procedures of 40 CFR part 790, or is the subject of an... is a living organism, and that meets the definition of microorganism at 40 CFR 725.3. Any chemical...) Naturally occurring chemical substances. Any naturally occurring chemical substance, as described in 40...

  1. [Systematization of data and information on delayed consequences of the effects of chemicals in humans].

    PubMed

    Ianno, L V; Pimenova, M N; Osipova, I V

    1993-01-01

    The systematization and analysis of the data connected with delayed consequences arising in human body from exposure to dangerous chemicals have been carried out. The paper contains the list of dangerous chemicals exerting mutagenic or carcinogenic effects and chromosome aberrations. The cytologic express method of revealing mucous membrane dysplasia resulting from exposure to some chemical mutagens have been evaluated.

  2. 33 CFR 148.108 - What if a Federal or State agency or other interested party requests additional information?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... impact statement or environmental assessment. MARAD will consider the request before making a final... time and effort required by the applicant in gathering the information will result in an undue delay...

  3. Chemical Industry Corrosion Management: A Comprehensive Information System (ASSET 2). Final Report

    SciTech Connect

    John, Randy C.; Young, Arthur L.; Pelton, Arthur D.; Thompson, William T.; Wright, Ian G.

    2008-10-10

    The research sponsored by this project has greatly expanded the ASSET corrosion prediction software system to produce a world-class technology to assess and predict engineering corrosion of metals and alloys corroding by exposure to hot gases. The effort included corrosion data compilation from numerous industrial sources and data generation at Shell Oak Ridge National Laboratory and several other companies for selected conditions. These data were organized into groupings representing various combinations of commercially available alloys and corrosion by various mechanisms after acceptance via a critical screening process to ensure the data were for alloys and conditions, which were adequately well defined, and of sufficient repeatability. ASSET is the largest and most capable, publicly-available technology in the field of corrosion assessment and prediction for alloys corroding by high temperature processes in chemical plants, hydrogen production, energy conversion processes, petroleum refining, power generation, fuels production and pulp/paper processes. The problems addressed by ASSET are: determination of the likely dominant corrosion mechanism based upon information available to the chemical engineers designing and/or operating various processes and prediction of engineering metal losses and lifetimes of commercial alloys used to build structural components. These assessments consider exposure conditions (metal temperatures, gas compositions and pressures), alloy compositions and exposure times. Results of the assessments are determination of the likely dominant corrosion mechanism and prediction of the loss of metal/alloy thickness as a function of time, temperature, gas composition and gas pressure. The uses of these corrosion mechanism assessments and metal loss predictions are that the degradation of processing equipment can be managed for the first time in a way which supports efforts to reduce energy consumption, ensure structural integrity of equipment

  4. Possibility of controlling the chemical pattern of He and Ar “guided streamers” by means of N{sub 2} or O{sub 2} additives

    SciTech Connect

    Gazeli, K.; Svarnas, P. E-mail: franck.clement@univ-pau.fr; Held, B.; Clément, F. E-mail: franck.clement@univ-pau.fr; Marlin, L.

    2015-03-07

    Plasma chemistry at atmospheric pressure and low temperature has met an increased interest due to the effective production of reactive species (mainly reactive nitrogen species and reactive oxygen species) which are demanded in many applications like in biomedicine. Τhe generation of such emissive reactive species is herein studied. A single parameter, i.e., the gas composition, is tuned and abundant chemical species are obtained in a quite controllable manner. The system refers to a small dielectric barrier discharge based reactor fed with He–N{sub 2}/O{sub 2} or Ar–N{sub 2}/O{sub 2} gases, which provides plasma in the form of “guided streamers.” The plasma is sustained by positive high voltage pulses, and the emissive transitions versus the gas composition is determined by UV-VIS optical emission spectroscopy. The relative intensities of emissive species are recorded in the ambient air where the streamers propagate. The evolution of dominant species as a function of the gas composition is mapped, and optimal conditions in terms of species production are clearly revealed. The results show that additives do not necessarily enhance the density of all species, implying the need for plasma chemistry optimization in respect to every application. The study is extended inside the reactor, supporting the above statements. Finally, the rotational and vibrational distributions of critical probe molecules are recorded, testing the dependence of the gas temperature and energy transfer, respectively, on the gas composition.

  5. 45 CFR 1351.19 - What additional information should an applicant or grantee have about a Runaway and Homeless...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Homeless Youth Program grants. These include: (1) The provisions of 45 CFR part 74 pertaining to the Administration of Grants; (2) The provisions of 45 CFR part 16, Departmental Grants Appeal Process, and the provisions of Informal Grant Appeal Procedures (Indirect Costs) in volume 45 CFR part 75; (3) The...

  6. 45 CFR 1351.19 - What additional information should an applicant or grantee have about a Runaway and Homeless...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Homeless Youth Program grants. These include: (1) The provisions of 45 CFR part 74 pertaining to the Administration of Grants; (2) The provisions of 45 CFR part 16, Departmental Grants Appeal Process, and the provisions of Informal Grant Appeal Procedures (Indirect Costs) in volume 45 CFR part 75; (3) The...

  7. 45 CFR 1351.19 - What additional information should an applicant or grantee have about a Runaway and Homeless...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Homeless Youth Program grants. These include: (1) The provisions of 45 CFR part 74 pertaining to the Administration of Grants; (2) The provisions of 45 CFR part 16, Departmental Grants Appeal Process, and the provisions of Informal Grant Appeal Procedures (Indirect Costs) in volume 45 CFR part 75; (3) The...

  8. 45 CFR 1351.19 - What additional information should an applicant or grantee have about a Runaway and Homeless...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Homeless Youth Program grants. These include: (1) The provisions of 45 CFR part 74 pertaining to the Administration of Grants; (2) The provisions of 45 CFR part 16, Departmental Grants Appeal Process, and the provisions of Informal Grant Appeal Procedures (Indirect Costs) in volume 45 CFR part 75; (3) The...

  9. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  10. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  11. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  12. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  13. 36 CFR 1290.4 - Types of materials included in scope of assassination record and additional records and information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION JFK ASSASSINATION RECORDS... COLLECTION ACT OF 1992 (JFK ACT) § 1290.4 Types of materials included in scope of assassination record and... information includes, for purposes of interpreting and implementing the JFK Act: (a) Papers, maps, and...

  14. Incorporating High-Throughput Exposure Predictions With Dosimetry-Adjusted In Vitro Bioactivity to Inform Chemical Toxicity Testing

    PubMed Central

    Wetmore, Barbara A.; Wambaugh, John F.; Allen, Brittany; Ferguson, Stephen S.; Sochaski, Mark A.; Setzer, R. Woodrow; Houck, Keith A.; Strope, Cory L.; Cantwell, Katherine; Judson, Richard S.; LeCluyse, Edward; Clewell, Harvey J.; Thomas, Russell S.; Andersen, Melvin E.

    2015-01-01

    We previously integrated dosimetry and exposure with high-throughput screening (HTS) to enhance the utility of ToxCast HTS data by translating in vitro bioactivity concentrations to oral equivalent doses (OEDs) required to achieve these levels internally. These OEDs were compared against regulatory exposure estimates, providing an activity-to-exposure ratio (AER) useful for a risk-based ranking strategy. As ToxCast efforts expand (ie, Phase II) beyond food-use pesticides toward a wider chemical domain that lacks exposure and toxicity information, prediction tools become increasingly important. In this study, in vitro hepatic clearance and plasma protein binding were measured to estimate OEDs for a subset of Phase II chemicals. OEDs were compared against high-throughput (HT) exposure predictions generated using probabilistic modeling and Bayesian approaches generated by the U.S. Environmental Protection Agency (EPA) ExpoCast program. This approach incorporated chemical-specific use and national production volume data with biomonitoring data to inform the exposure predictions. This HT exposure modeling approach provided predictions for all Phase II chemicals assessed in this study whereas estimates from regulatory sources were available for only 7% of chemicals. Of the 163 chemicals assessed in this study, 3 or 13 chemicals possessed AERs < 1 or < 100, respectively. Diverse bioactivities across a range of assays and concentrations were also noted across the wider chemical space surveyed. The availability of HT exposure estimation and bioactivity screening tools provides an opportunity to incorporate a risk-based strategy for use in testing prioritization. PMID:26251325

  15. Space Takes Time: Concentration Dependent Output Codes from Primary Olfactory Networks Rapidly Provide Additional Information at Defined Discrimination Thresholds.

    PubMed

    Daly, Kevin C; Bradley, Samual; Chapman, Phillip D; Staudacher, Erich M; Tiede, Regina; Schachtner, Joachim

    2015-01-01

    As odor concentration increases, primary olfactory network representations expand in spatial distribution, temporal complexity and duration. However, the direct relationship between concentration dependent odor representations and the psychophysical thresholds of detection and discrimination is poorly understood. This relationship is absolutely critical as thresholds signify transition points whereby representations become meaningful to the organism. Here, we matched stimulus protocols for psychophysical assays and intracellular recordings of antennal lobe (AL) projection neurons (PNs) in the moth Manduca sexta to directly compare psychophysical thresholds and the output representations they elicit. We first behaviorally identified odor detection and discrimination thresholds across an odor dilution series for a panel of structurally similar odors. We then characterized spatiotemporal spiking patterns across a population of individually filled and identified AL PNs in response to those odors at concentrations below, at, and above identified thresholds. Using spatial and spatiotemporal based analyses we observed that each stimulus produced unique representations, even at sub-threshold concentrations. Mean response latency did not decrease and the percent glomerular activation did not increase with concentration until undiluted odor. Furthermore, correlations between spatial patterns for odor decreased, but only significantly with undiluted odor. Using time-integrated Euclidean distance (ED) measures, we determined that added spatiotemporal information was present at the discrimination but not detection threshold. This added information was evidenced by an increase in integrated distance between the sub-detection and discrimination threshold concentrations (of the same odor) that was not present in comparison of the sub-detection and detection threshold. After consideration of delays for information to reach the AL we find that it takes ~120-140 ms for the AL to

  16. Space Takes Time: Concentration Dependent Output Codes from Primary Olfactory Networks Rapidly Provide Additional Information at Defined Discrimination Thresholds

    PubMed Central

    Daly, Kevin C.; Bradley, Samual; Chapman, Phillip D.; Staudacher, Erich M.; Tiede, Regina; Schachtner, Joachim

    2016-01-01

    As odor concentration increases, primary olfactory network representations expand in spatial distribution, temporal complexity and duration. However, the direct relationship between concentration dependent odor representations and the psychophysical thresholds of detection and discrimination is poorly understood. This relationship is absolutely critical as thresholds signify transition points whereby representations become meaningful to the organism. Here, we matched stimulus protocols for psychophysical assays and intracellular recordings of antennal lobe (AL) projection neurons (PNs) in the moth Manduca sexta to directly compare psychophysical thresholds and the output representations they elicit. We first behaviorally identified odor detection and discrimination thresholds across an odor dilution series for a panel of structurally similar odors. We then characterized spatiotemporal spiking patterns across a population of individually filled and identified AL PNs in response to those odors at concentrations below, at, and above identified thresholds. Using spatial and spatiotemporal based analyses we observed that each stimulus produced unique representations, even at sub-threshold concentrations. Mean response latency did not decrease and the percent glomerular activation did not increase with concentration until undiluted odor. Furthermore, correlations between spatial patterns for odor decreased, but only significantly with undiluted odor. Using time-integrated Euclidean distance (ED) measures, we determined that added spatiotemporal information was present at the discrimination but not detection threshold. This added information was evidenced by an increase in integrated distance between the sub-detection and discrimination threshold concentrations (of the same odor) that was not present in comparison of the sub-detection and detection threshold. After consideration of delays for information to reach the AL we find that it takes ~120–140 ms for the AL to

  17. 78 FR 20101 - Access to Confidential Business Information by Chemical Abstract Services

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-03

    ... about April 1, 2013. FOR FURTHER INFORMATION CONTACT: For technical information contact: Scott Sherlock... number: (202) 564-8251; email address: sherlock.scott@epa.gov . For general information contact:...

  18. Information collection request for proposed National Primary Drinking Water Regulations for synthetic organic chemicals (draft), April 1989

    SciTech Connect

    Not Available

    1989-04-01

    The Environmental Protection Agency (EPA), under the requirements of the Safe Drinking Water Act (Section 1401 and 1412, P.L. 99-339, as amended in 1986), has proposed National Primary Drinking Water Regulations (NPDWR) pertaining to the contamination of public water systems by synthetic organic chemical (SOCs) contaminants. The proposed regulations require the collection of information by public water systems, states, and the EPA. Information collection requirements include monitoring, reporting, and recordkeeping activities that are discussed in this Information Collection Requests (ICR) document.

  19. Information-collection request for: National Primary Drinking Water Regulations for inorganic chemicals. Phase 2, March 1989

    SciTech Connect

    Not Available

    1989-03-31

    The Environmental Protection Agency (EPA), under the requirements of the Safe Drinking Water Act Section 1401 and 1412, P.L. 99-339, as amended in 1986, has proposed a National Primary Drinking Water Regulation (NPDWR) pertaining to the contamination of public-water systems by inorganic chemical contaminants. The proposed IOCs Rule includes information collection requirements for eight inorganic chemicals -- asbestos, barium, cadmium, chromium, mercury, nitrate, nitrite, and selenium. The information collection request analyzes the information burden imposed on public-water systems and States as a result of the regulation. EPA is proposing only to regulate source-related inorganics under this rule, as opposed to inorganics which predominately occur as corrosion by-products and naturally occurring copper and lead are analyzed in the RIA and ICR for lead and corrosion by-products. Note also that EPA has already promulgated a NPDWR for fluoride.

  20. Evaluation of Consumer Product Co-occurrence to Inform Chemical Exposure

    EPA Science Inventory

    Consumer products are an important target of chemical innovation. Used daily for personal hygiene, home care, disinfection and cleaning, consumer products provide a host of benefits, and also an efficient delivery vehicle for a variety of chemicals into our homes and bodies. Al...