Science.gov

Sample records for additional cross-border measures

  1. Prospects for cost reductions from relaxing additional cross-border measures related to livestock trade.

    PubMed

    Hop, G E; Mourits, M C M; Slager, R; Oude Lansink, A G J M; Saatkamp, H W

    2013-05-01

    Compared with the domestic trade in livestock, intra-communal trade across the European Union (EU) is subject to costly, additional veterinary measures. Short-distance transportation just across a border requires more measures than long-distance domestic transportation, while the need for such additional cross-border measures can be questioned. This study examined the prospects for cost reductions from relaxing additional cross-border measures related to trade within the cross-border region of the Netherlands (NL) and Germany (GER); that is, North Rhine Westphalia and Lower Saxony. The study constructed a deterministic spread-sheet cost model to calculate the costs of both routine veterinary measures (standard measures that apply to both domestic and cross-border transport) and additional cross-border measures (extra measures that only apply to cross-border transport) as applied in 2010. This model determined costs by stakeholder, region and livestock sector, and studied the prospects for cost reduction by calculating the costs after the relaxation of additional cross-border measures. The selection criteria for relaxing these measures were (1) a low expected added value on preventing contagious livestock diseases, (2) no expected additional veterinary risks in case of relaxation of measures and (3) reasonable cost-saving possibilities. The total cost of routine veterinary measures and additional cross-border measures for the cross-border region was €22.1 million, 58% (€12.7 million) of which came from additional cross-border measures. Two-thirds of this €12.7 million resulted from the trade in slaughter animals. The main cost items were veterinary checks on animals (twice in the case of slaughter animals), export certification and control of export documentation. Four additional cross-border measures met the selection criteria for relaxation. The relaxation of these measures could save €8.2 million (€5.0 million for NL and €3.2 million for GER) annually

  2. Cross-border collaboration in the field of highly contagious livestock diseases: a general framework for policy support.

    PubMed

    Hop, G E; Mourits, M C M; Oude Lansink, A G J M; Saatkamp, H W

    2014-08-01

    This paper analyses the potential gains and the main challenges for increased cross-border collaboration in the control of highly contagious livestock diseases in regions with cross-border reliance on production and consumption of livestock commodities. The aim of this intensification of cross-border collaboration is to retain the economic advantages of cross-border trade in livestock and livestock commodities while maintaining a low risk of highly contagious livestock diseases. From these two foci, possibilities for future policy making with respect to highly contagious livestock diseases are discussed: peacetime cross-border cooperation to improve the cost-effectiveness of routine veterinary measures and crisis time cross-border harmonization of current disease control strategies. A general disease management framework was used to describe the way in which these two fields are related to and affect the epidemiological system and, consequently, how they impact the stakeholders. In addition to this framework, the importance of a good understanding of influencing factors, that is, the production structure of livestock, was stressed because these factors are important determinants of the frequency and magnitude of highly contagious livestock diseases and their economic impact. The use of the suggested integrated approach was illustrated for the extended cross-border region of the Netherlands and Germany, that is, North Rhine Westphalia and Lower Saxony. For this region, current difficulties in cross-border trade in livestock and livestock commodities and possibilities for future cross-border collaboration were examined. The concepts and ideas presented in this paper should foster future development of cross-border collaboration in animal health control. PMID:23066698

  3. Assessing a cross-border logistics policy using a performance measurement system framework: the case of Hong Kong and the Pearl River Delta region

    NASA Astrophysics Data System (ADS)

    Wong, David W. C.; Choy, K. L.; Chow, Harry K. H.; Lin, Canhong

    2014-06-01

    For the most rapidly growing economic entity in the world, China, a new logistics operation called the indirect cross-border supply chain model has recently emerged. The primary idea of this model is to reduce logistics costs by storing goods at a bonded warehouse with low storage cost in certain Chinese regions, such as the Pearl River Delta (PRD). This research proposes a performance measurement system (PMS) framework to assess the direct and indirect cross-border supply chain models. The PMS covers four categories including cost, time, quality and flexibility in the assessment of the performance of direct and indirect models. Furthermore, a survey was conducted to investigate the logistics performance of third party logistics (3PLs) at the PRD regions, including Guangzhou, Shenzhen and Hong Kong. The significance of the proposed PMS framework allows 3PLs accurately pinpoint the weakness and strengths of it current operations policy at four major performance measurement categories. Hence, this helps 3PLs further enhance the competitiveness and operations efficiency through better resources allocation at the area of warehousing and transportation.

  4. Cross-border reprogenetic services.

    PubMed

    Couture, V; Drouin, R; Tan, S-L; Moutquin, J-M; Bouffard, C

    2015-01-01

    The purpose of this review is to synthesize the current knowledge on the international movement of patients and biopsied embryo cells for pre-implantation genetic diagnosis and its different applications. Thus far, few attempts have been made to identify the specific nature of this phenomenon called 'cross-border reprogenetic services'. There is scattered evidence, both empirical and speculative, suggesting that these services raise major issues in terms of service provision, risks for patients and the children-to-come, the legal liabilities of physicians, as well as social justice. To compile this evidence, this review uses the narrative overview protocol combined with thematic analysis. Five major themes have emerged from the literature at the conjunction of cross-border treatments and reprogenetics: 'scope', 'scale', 'motivations', 'concerns', and 'governance'. Similar themes have already been observed in the case of other medical tourism activities, but this review highlights their singularity with reprogenetic services. It emphasizes the diagnostic and autologous feature of reprogenetics, the constant risk of misdiagnosis, the restriction on certain tests for medically controversial conditions, and the uncertain accessibility of genetic counseling in cross-border settings. PMID:24798608

  5. Cross-border ties and Arab American mental health.

    PubMed

    Samari, Goleen

    2016-04-01

    Due to increasing discrimination and marginalization, Arab Americans are at a greater risk for mental health disorders. Social networks that include ties to the country of origin could help promote mental well-being in the face of discrimination. The role of countries of origin in immigrant mental health receives little attention compared to adjustment in destination contexts. This study addresses this gap by analyzing the relationship between nativity, cross-border ties, and psychological distress and happiness for Arab Americans living in the greater Detroit Metropolitan Area (N = 896). I expect that first generation Arab Americans will have more psychological distress compared to one and half, second, and third generations, and Arab Americans with more cross-border ties will have less psychological distress and more happiness. Data come from the 2003 Detroit Arab American Study, which includes measures of nativity, cross-border ties--attitudes, social ties, media consumption, and community organizations, and the Kessler-10 scale of psychological distress and self-reported happiness. Ordered logistic regression analyses suggest that psychological distress and happiness do not vary much by nativity alone. However, cross-border ties have both adverse and protective effects on psychological distress and happiness. For all generations of Arab Americans, cross-border attitudes and social ties are associated with greater odds of psychological distress and for first generation Arab Americans, media consumption is associated with greater odds of unhappiness. In contrast, for all generations, involvement in cross-border community organizations is associated with less psychological distress and for the third generation, positive cross-border attitudes are associated with higher odds of happiness. These findings show the complex relationship between cross-border ties and psychological distress and happiness for different generations of Arab Americans. PMID:26999416

  6. Cross-border gas-line projects face daunting challenges

    SciTech Connect

    Khene, D.E.

    1997-12-15

    Pricing, costs, financing, and politics are chief among the issues that can impede construction of major, cross-border gas-pipeline projects trying to connect plentiful reserves with unsatisfied market demand. Additionally, strained relationships among parties involved in both supply and delivery can further slow or even halt progress on a project. In the cases of the Transmed (Algeria across Tunisia to Italy) and the Maghreb-Europe (Algeria across Morocco to Spain), the close working relationships of all parties involved helped resolve many issues and were key in the projects` eventual completion. Here is an update on these two important pipelines in addition to a synthesis of Sonatrach`s views on some of the major issues raised by the development of cross-border gas-transmission projects.

  7. Feasibility Analysis of Developing Cross-border Network Education in China

    NASA Astrophysics Data System (ADS)

    Lan, Jun

    In the era of economic globalization, strengthen of international cooperation on network education is a general trend. Although China has not made commitments about the market access and national treatment of cross-border supply in Schedule of Specific Commitments on Services, the basic conditions of network education development in China have been met. The Chinese government should formulate strategies for the development of cross-border network education and take relevant measures to implement them. In the near future, the carrying out of cross-border network education in China will become an irreversible trend, and will possess broad prospect with the advance of globalization of Chinese education.

  8. Cross-border firing and injury patterns

    PubMed Central

    Gupta, Nital; Hackla, Shafiq; Bhagat, Virendar; Singh, Satvir; Hussain, Farid; Gupta, Anil

    2016-01-01

    Introduction: Cross-border firing are increasingly being common in the modern era. The injuries resulting from these low intensity conflicts are a source of anxiety among treating physicians and their respective governments. The provisions are required to minimise the suffering of the victims viz. Mode of injuries, mortality patterns, adequacy of treatment at pre-hospital and tertiary care hospital and provisions to decrease morbidity and mortality for the people living in these areas. Materials and Methods: A retrospective study was conducted in GMCH, Jammu who suffered injuries due to cross border firing in the month of October, 2014. 68 patients were reported in the causality wing. All the patients were referred from level 2 trauma centre. There were 51 males and 17 females out of which 5 were children. The cause of injury, involvement of organ system, cause of mortality and morbidity and loopholes in prehospital management were identified. Results: Sharpnel were the most common cause of injury followed by indirect trauma. The common cause of mortality was abdominal and thoracic injuries. There were 4 deaths at hospital 2 of which were brought dead and 2 died during the course of treatment. There were twenty patients with extremity injuries, fourteen with chest trauma, eleven with abdomen including parineal injuries, three with head injuries, eight with ENT injuries, three with eye injuries and nine with splinters in the back out of which two were in the spinal canal. Conclusion: Prehospital stabilisation, early transport, in-transit resuscitation, immediate surgery if required and implementation of triage model and ATLS protocol has been the key to reduce mortality and morbidity. PMID:26957821

  9. A longitudinal analysis of cross-border ties and depression for Latino adults.

    PubMed

    Torres, Jacqueline M; Lee, Anne; González, Hector M; Garcia, Lorena; Haan, Mary N

    2016-07-01

    Recent scholarship suggests a significant association between cross-border ties, or ties maintained with family and friends in countries and communities of origin, and the mental health of immigrants and their descendants. To date, this research has been exclusively cross-sectional, precluding conclusions about a causal association between cross-border ties and mental health outcomes. In the present study we undertake a longitudinal analysis of the relationship between cross-border ties and depression measured over a ten-year period for a sample of immigrant and U.S.-born Latinos. Data are from the Sacramento Area Latino Study on Aging (1998-2008), a population-based, prospective study of Latin American-origin adults 60 years and older. We find that cross-border ties reported at baseline were significantly associated with depression in subsequent study waves, even after controlling for the presence of depression at baseline, albeit with substantial differences by gender and nativity. Specifically, communication with family and friends in Latin America and travel to Latin America at baseline were each significantly associated with greater odds of depression for immigrant women, but with lower odds of depression for U.S.-born Latina women over the study period. Travel to Latin America at baseline was significantly associated with lower odds of depression for Latino men across the study. Across all models we control for depressive symptomatology at baseline to account for the reciprocal nature of depressive symptoms and engagement with social ties, including cross-border ties. Our findings suggest that cross-border ties may represent a unique source of both resilience and risk for the long-term mental health of immigrant Latinos and their descendants. PMID:27239901

  10. Responsive regulation of cross-border assisted reproduction.

    PubMed

    Millbank, Jenni

    2015-12-01

    This article considers the question: how might Australian regulators constructively respond to the dynamic and complex challenges posed by cross-border assisted reproduction? To begin, the article summarises the available international scholarship and outlines what little we know about Australian cross-border reproductive travel. Of the three generally proposed responses to cross-border reproductive care (prohibition, harm minimisation and harmonisation), the article summarily rejects the first approach, and instead discusses a mixture of the latter two. The article proposes the beginnings of an immediate policy response aimed not at stopping cross-border practices per se, but rather at understanding and reducing the risks associated with them, as well as flagging the pursuit of more ambitious meta-goals such as developing more equitable and accessible treatment frameworks for assisted reproductive technology and encouraging domestic self-sufficiency in reproduction. PMID:26939503

  11. Cross-border reproductive care: a committee opinion.

    PubMed

    2013-09-01

    Cross-border reproductive care (CBRC) is a growing worldwide phenomenon, raising questions about why assisted reproductive technology (ART) patients travel abroad, what harms and benefits may result, and what duties health care providers may have in advising and treating patients who travel for reproductive services. Cross-border care offers benefits and poses harms to ART stakeholders, including patients, offspring, providers, gamete donors, gestational carriers, and local populations in destination countries. PMID:23523262

  12. Medical sociology as a heuristic instrument for medical tourism and cross-border healthcare

    PubMed Central

    Mainil, Tomas

    2015-01-01

    In this commentary, we establish a relationship between medical sociology and the study of medical tourism and cross-border healthcare by introducing Ronald Andersen’s behavioral model of healthcare use, and linking this model to the recent empirical study of Kovacs et al. on patients travelling to Hungary for orthopedic treatment. Finally, we plead for more measurement in the field of patient mobility. PMID:25844386

  13. Cross-Border Education: Conceptual Confusion and Data Deficits

    ERIC Educational Resources Information Center

    Knight, Jane

    2006-01-01

    It is no longer just students who are moving across borders to study. Program and institutions/providers are delivering foreign education programs and qualifications to students in their own countries. A whole new world of international academic mobility is opening up. This article looks at the concepts of cross-border, transnational, and…

  14. UNIVERSITY OF ARIZONA CROSS-BORDER WATER TECHNOLOGY COLLABORATION

    EPA Science Inventory

    The outcome of Phase I of the University of Arizona Cross-border Water Technology Collaboration project was the development and testing of solar distillation designs and selection of the final design for implementation that could be built in a developing country...

  15. Shifting Institutional Boundaries through Cross-Border Higher Education

    ERIC Educational Resources Information Center

    Amaral, Alberto; Tavares, Orlanda; Cardoso, Sónia; Sin, Cristina

    2016-01-01

    Cross-border higher education (CBHE) has been changing the organizational boundaries of higher education institutions (HEIs). This study aims to analyze the shifting boundaries of Portuguese HEIs through the lens of the identity concept in organization theories, considering three contexts with different levels of regulation: African…

  16. The pluralism problem in cross-border reproductive care.

    PubMed

    Storrow, R F

    2010-12-01

    Outlawing well established forms of assisted reproduction places obstacles in the path of couples who wish to attain their reproductive goals with medical assistance. One effect of restrictive reproductive laws that has received widespread attention is cross-border reproductive travel. In Europe, such travel is permitted by the policy of free movement of persons that is a cornerstone of the democratic and economic stability of the European Union. Cross-border reproductive travel fails to promote moral and political pluralism in democratic states for three primary reasons. First, the opportunity for patients to go abroad for treatment tempers organized resistance to the law and allows government to pass stricter regulations than it otherwise might. Second, cross-border reproductive care has been shown to have deleterious extraterritorial effects that undermine the articulated rationales behind restrictive reproductive laws. Third, laws that generate demand for cross-border reproductive care often fail to satisfy the standard of proportionality that restrictions on human reproduction must meet. PMID:20940141

  17. Changing Destinations: Ideal Attraction and Actual Movement of Cross-Border Tertiary Students from Mainland China

    ERIC Educational Resources Information Center

    Ghazarian, Peter G.

    2014-01-01

    Globalization has driven growth in the market for cross-border students. Mainland China, with a burgeoning economy and the largest national population, has become an important source of cross-border students. This study identifies ideal attraction in mainland China to destinations for cross-border tertiary education, as expressed by ideal first…

  18. TECHNIQUES TO ASSESS CROSS-BORDER AIR POLLUTION AND APPLICATION TO A U.S.-MEXICO BORDER REGION

    EPA Science Inventory

    A year-long assessment of cross-border air pollution was conducted in the eastmost section of the US-Mexico border region, known as the Lower Rio Grande Valley, in South Texas. Measurements were conducted on the US side and included fine particle mass (PM2.5) and elemental com...

  19. A typology of cross-border patient mobility.

    PubMed

    Glinos, Irene A; Baeten, Rita; Helble, Matthias; Maarse, Hans

    2010-11-01

    Based on systematic observation and analysis of available evidence, we propose a typology of cross-border patient mobility (rather than the so-called 'medical tourism') defined as the movement of a patient travelling to another country to seek planned health care. The typology is constructed around two dimensions based on the questions 'why do patients go abroad for planned health care?' and 'how is care abroad paid for?' Four types of patient motivations and two funding types have been identified. Combined in a matrix, they make eight possible scenarios of patient mobility each illustrated with international examples. PMID:20729128

  20. Simulation of Cross-border Impacts Resulting from Classical Swine Fever Epidemics within the Netherlands and Germany.

    PubMed

    Hop, G E; Mourits, M C M; Oude Lansink, A G J M; Saatkamp, H W

    2016-02-01

    The cross-border region of the Netherlands (NL) and the two German states of North Rhine Westphalia (NRW) and Lower Saxony (LS) is a large and highly integrated livestock production area. This region increasingly develops towards a single epidemiological area in which disease introduction is a shared veterinary and, consequently, economic risk. The objectives of this study were to examine classical swine fever (CSF) control strategies' veterinary and direct economic impacts for NL, NRW and LS given the current production structure and to analyse CSF's cross-border causes and impacts within the NL-NRW-LS region. The course of the epidemic was simulated by the use of InterSpread Plus, whereas economic analysis was restricted to calculating disease control costs and costs directly resulting from the control measures applied. Three veterinary control strategies were considered: a strategy based on the minimum EU requirements, a vaccination and a depopulation strategy based on NL and GER's contingency plans. Regardless of the veterinary control strategy, simulated outbreak sizes and durations for 2010 were much smaller than those simulated previously, using data from over 10 years ago. For example, worst-case outbreaks (50th percentile) in NL resulted in 30-40 infected farms and lasted for two to four and a half months; associated direct costs and direct consequential costs ranged from €24.7 to 28.6 million and €11.7 to 26.7 million, respectively. Both vaccination and depopulation strategies were efficient in controlling outbreaks, especially large outbreaks, whereas the EU minimum strategy was especially deficient in controlling worst-case outbreaks. Both vaccination and depopulation strategies resulted in low direct costs and direct consequential costs. The probability of cross-border disease spread was relatively low, and cross-border spread resulted in small, short outbreaks in neighbouring countries. Few opportunities for further cross-border harmonization and

  1. Interoperability standards enabling cross-border patient summary exchange.

    PubMed

    Chronaki, Catherine; Estelrich, Ana; Cangioli, Giorgio; Melgara, Marcello; Kalra, Dipak; Gonzaga, Zabrina; Garber, Larry; Blechman, Elaine; Ferguson, Jamie; Kay, Stephen

    2014-01-01

    In an increasingly mobile world, many citizens and professionals are frequent travellers. Access during unplanned care to their patient summary, their most essential health information in a form physicians in another country can understand can impact not only their safety, but also the quality and effectiveness of care. International health information technology (HIT) standards such as HL7 CDA have been developed to advance interoperability. Implementation guides (IG) and IHE profiles constrain standards and make them fit for the purpose of specific use cases. A joint effort between HL7, IHE, and HealthStory created Consolidated CDA (C-CDA), a set of harmonized CDA IGs for the US that is cited in the Meaning Use II (MU-II) regulation. In the EU, the Patient Summary (PS) Guideline recently adopted, cites the epSOS IG also based on HL7 CDA, to support cross-border care in the EU and inform national eHealth programs. Trillium Bridge project supports international standards development by extending the EU PS Guideline and MU-II in the transatlantic setting. This paper presents preliminary findings from comparing patient summaries in the EU and US and reflects on the challenge of implementing interoperable eHealth systems in the cross-border or transatlantic setting. PMID:25160185

  2. Cross-border health and productivity effects of alcohol policies.

    PubMed

    Johansson, Per; Pekkarinen, Tuomas; Verho, Jouko

    2014-07-01

    This paper studies the cross-border health and productivity effects of alcohol taxes. We estimate the effect of a large cut in the Finnish alcohol tax on mortality, alcohol-related illnesses and work absenteeism in Sweden. This tax cut led to large differences in the prices of alcoholic beverages between these two countries and to a considerable increase in cross-border shopping. The effect is identified using differences-in-differences strategy where changes in these outcomes in regions near the Finnish border are compared to changes in other parts of northern Sweden. We use register data where micro level data on deaths, hospitalisations and absenteeism is merged to population-wide micro data on demographics and labour market outcomes. Our results show that the Finnish tax cut did not have any clear effect on mortality or alcohol-related hospitalisations in Sweden. However, we find that workplace absenteeism increased by 9% for males and by 15% for females near the Finnish border as a result of the tax cut. PMID:24792191

  3. 14 April 1895, Ljubljana earthquake - A new, cross-border study

    NASA Astrophysics Data System (ADS)

    Albini, Paola; Cecić, Ina; Hammerl, Christa

    2014-05-01

    Though it has been the object of both contemporary and modern investigations, the 14 April 1895, Ljubljana event (Mw ~6, according to the European catalogue SHEEC) is still not fully described in its effects. One manifest reason for this is that being the 1895 earthquake a cross-border event, it affected an area that today pertains to three different countries, Slovenia, Austria, and Italy, as well as accounted for in sources today scattered in different archives and libraries. In addition, the 1895 Ljubljana earthquake was a turning point for many aspects. Imperial Vienna sent help to rebuild the damaged city and its surroundings, and the architects brought modern ideas about urban planning, public hygiene and contemporary design. It was also the beginning of organised seismological observations in Slovenia - macroseismic, right after the earthquake, and instrumental, in 1896. The macroseismic data about this earthquake are plentiful and very well preserved. In this new, cross-border study we intend to re-evaluate the already known as well as the newly collected data sources. Specific attention is devoted to the archival documentation on damage, and to the far-field data, which were not comprehensively taken into account beforehand. As the earthquake was felt in a large part of central and Eastern Europe, a considerable effort is put into collecting and interpreting the coeval sources, written in many different languages.

  4. Detecting a trend change in cross-border epidemic transmission

    NASA Astrophysics Data System (ADS)

    Maeno, Yoshiharu

    2016-09-01

    A method for a system of Langevin equations is developed for detecting a trend change in cross-border epidemic transmission. The equations represent a standard epidemiological SIR compartment model and a meta-population network model. The method analyzes a time series of the number of new cases reported in multiple geographical regions. The method is applicable to investigating the efficacy of the implemented public health intervention in managing infectious travelers across borders. It is found that the change point of the probability of travel movements was one week after the WHO worldwide alert on the SARS outbreak in 2003. The alert was effective in managing infectious travelers. On the other hand, it is found that the probability of travel movements did not change at all for the flu pandemic in 2009. The pandemic did not affect potential travelers despite the WHO alert.

  5. Freight Shuttle System: Cross-Border Movement of Goods

    SciTech Connect

    2011-05-31

    The Freight Shuttle System (FSS) is designed to provide freight transportation services between those short and intermediate distance locations (within 600 miles) that are currently handling large volumes of freight traffic. Much like trucks, the FSS's transporters are autonomous: each transporter has its own propulsion and travels independently of other transporters. Inspired by railroads, each FSS transporter has steel wheels operating on a steel running surface and can carry either a standardsize freight container or an over-the-road truck trailer. However, unlike either rail or trucks, the FSS runs on an elevated, dedicated guideway to avoid the interference of other transportation systems. The objective of this report is to examine the potential viability for an alternative transportation system for trailers and containers in a multi-national, cross-border setting. The El Paso-Ciudad Juarez region serves as the environment of this analysis.

  6. Managing the Quality of Cross-Border Higher Education in Zimbabwe

    ERIC Educational Resources Information Center

    Garwe, Evelyn Chiyevo

    2015-01-01

    A study on investigating the issues of quality associated with cross-border higher education was carried out using the case study approach focusing on Zimbabwe. The methodology involved document analysis of the cases of regulation and accreditation of cross-border higher education providers and assessment of qualifications acquired from foreign…

  7. UNESCO-APQN Toolkit: Regulating the Quality of Cross-Border Education

    ERIC Educational Resources Information Center

    Online Submission, 2006

    2006-01-01

    As a result of increasing mobility of students and knowledge, cross border education, especially in higher education, is receiving general attention in the Asia and Pacific region. The toolkit serves as a reference tool to assist local policymakers in the formulation of a regulatory framework for cross-border education that is growing rapidly in…

  8. Should I stay or should I go? Waiting lists and cross-border care in the Netherlands.

    PubMed

    Brouwer, Werner; van Exel, Job; Hermans, Bert; Stoop, Arjen

    2003-03-01

    The recent ruling of the European Court of Justice in the case Smits-Peerbooms explicitly mentions undue delay as a legitimisation for cross-border care within the EU. In the Netherlands, waiting times are well above the norm set by several health care parties as well as maximally acceptable waiting times elicited in patients. This might indicate that Dutch patients are often entitled to care in other Member States, in the sense that insurers cannot withhold reimbursement of cross-border care in the present situation. However, experiments clearly demonstrate that few Dutch patients are willing to travel abroad. Patients seem to prefer longer waiting in the Netherlands over shorter waiting by going abroad, even those living in border regions. In addition, mobility of patients within the Netherlands is very modest. Given this inertia in patient mobility, in the short run, cross-border care will probably remain an insignificant phenomenon in terms of quantities of patients travelling abroad and therefore the impact of the Smits-Peerbooms rulings is limited. PMID:12595128

  9. Cross border health care provision: who gains, who loses.

    PubMed

    Levaggi, Rosella; Menoncin, Francesco

    2014-01-01

    The diffusion of the welfare state has produced a widespread involvement of the public sector in financing the production of private goods for paternalistic reasons. In this chapter we model the production of health care as a merit impure local public good whose consumption is subsidized and whose access is free, but not unlimited. The impure local public good aspect means that the production of health care spreads its benefits beyond the geographical boundaries of the Region where it is produced. Finally, we include the (optional) provision of an equalization grant that allows reduction of fiscal imbalance among Regions. In this framework we study the possible effects of cross border provision of health care. We assume that information is complete and symmetric and that there is no comparative advantage in local provision. In this context devolution is always suboptimal for the whole community: the lack of coordination means that the impure public good is under-provided. However, more efficient Regions may be better off because of the impure public good nature of health care. PMID:24864389

  10. Structural changes in cross-border liabilities: A multidimensional approach

    NASA Astrophysics Data System (ADS)

    Araújo, Tanya; Spelta, Alessandro

    2014-01-01

    We study the international interbank market through a geometric analysis of empirical data. The geometric analysis of the time series of cross-country liabilities shows that the systematic information of the interbank international market is contained in a space of small dimension. Geometric spaces of financial relations across countries are developed, for which the space volume, multivariate skewness and multivariate kurtosis are computed. The behavior of these coefficients reveals an important modification acting in the financial linkages since 1997 and allows us to relate the shape of the geometric space that emerges in recent years to the globally turbulent period that has characterized financial systems since the late 1990s. Here we show that, besides a persistent decrease in the volume of the geometric space since 1997, the observation of a generalized increase in the values of the multivariate skewness and kurtosis sheds some light on the behavior of cross-border interdependencies during periods of financial crises. This was found to occur in such a systematic fashion, that these coefficients may be used as a proxy for systemic risk.

  11. Legal perspectives on cross-border reproductive care.

    PubMed

    Crockin, Susan L

    2011-12-01

    Global cross-border reproductive care (CBRC), and the challenges accompanying it, are here to stay. A recent issue of this journal devoted to CBRC provides an extraordinary array of insights into multiple facets, with a focus on the legal dimensions of practices by restrictive countries such as Turkey and Italy. The articles identify restrictive laws that challenge and create vulnerabilities for both citizens and providers involved in CBRC, and call instead for more modest and nuanced legislation and the closing paper presents a thoughtful and ambitious outline for a future research agenda. This commentary reflects on the implications of these legal dimensions, including their applicability to countries with more permissive CBRC policies, discusses three specific examples of legal concerns that have arisen in the USA and identifies numerous legal issues meriting future study. Together with the nuanced, more modest legislation recommended for restrictive countries, consistent legal and judicial principles for CBRC in permissive countries would respect varying perspectives on family building while attempting to address a central legal concern of CBRC, the protection of families, third-parties and providers. Any future agenda should include research and recommendations on the legal dimensions of CBRC in both restrictive and permissive countries. PMID:22056635

  12. Seismic Hazard and risk assessment for Romania -Bulgaria cross-border region

    NASA Astrophysics Data System (ADS)

    Simeonova, Stela; Solakov, Dimcho; Alexandrova, Irena; Vaseva, Elena; Trifonova, Petya; Raykova, Plamena

    2016-04-01

    parameter in the historical earthquake catalogues. A particular advantage of using intensities is that the very irregular pattern of the attenuation field of the Vrancea intermediate depth earthquakes can be estimated from detailed macroseismic observations that are available (in both countries) for the study region. Additionally, de-aggregation of the seismic hazard for a recurrence period of 475 years (probability of exceedance of 10% in 50 years) for intensity was performed for 9 cities (administrative centers) situated in northern Bulgaria. Finally, applying SELENA software earthquake risk for Bulgarian part of the cross-boarder region is analyzed. The results presented for the Romania-Bulgaria cross border region are part of the work carried out in the DACEA Project (2010-2013) that was implemented in the framework of the Romania - Bulgaria Cross Border Cooperation Programme (2007-2013).

  13. Cross-border mobility and social networks: Laotians seeking medical treatment along the Thai border.

    PubMed

    Bochaton, Audrey

    2015-01-01

    Drawing upon research conducted on cross-border patients living in Laos and seeking care in Thailand, this paper examines the important role played by social networks in patients' decision-making and on the itineraries they choose to seek treatment on the Thai side of the border. Due to the vastly contrasting situations between the two countries in terms of healthcare supply, and considering Laotians' increasing demand for high quality healthcare, a number of them have managed to satisfy their needs by combining cross-border treatment with the use of the healthcare facilities provided by their own country. This study consisted first of household surveys conducted in five border areas (2006-2007) in Laos in order to quantify and map out cross-border healthcare-related travel patterns. Afterwards, interviews were conducted with cross-border patients (55), Laotian and Thai medical doctors (6), Thai social workers (5), and officials working in public institutions (12). While socioeconomic and spatial factors partly explain cross-border mobility, patients' social networks significantly influence treatment itineraries throughout the decision-making process, including logistical and financial considerations. The social networks existing at different geographical levels (neighbourhood, regional and global) are therefore a powerful analytical tool not only for understanding the emergence of these cross-border movements but also for justifying them in an authoritarian political environment such as Lao PDR's. PMID:25454637

  14. Higher Education Crossing Borders. A Guide to the Implications of the General Agreement on Trade in Services (GATS) for Cross-Border Education

    ERIC Educational Resources Information Center

    Knight, Jane

    2006-01-01

    This Guide examines the different dimensions of cross-border education within the context of General Agreement on Trade in Services (GATS): the present landscape, opportunities and challenges and the implications for policy and practice in higher education. It is meant for a range of stakeholders: policymakers, senior academic leaders, faculty…

  15. Recent advances to address European Union Health Security from cross border chemical health threats.

    PubMed

    Duarte-Davidson, R; Orford, R; Wyke, S; Griffiths, M; Amlôt, R; Chilcott, R

    2014-11-01

    The European Union (EU) Decision (1082/2013/EU) on serious cross border threats to health was adopted by the European Parliament in November 2013, in recognition of the need to strengthen the capacity of Member States to coordinate the public health response to cross border threats, whether from biological, chemical, environmental events or events which have an unknown origin. Although mechanisms have been in place for years for reporting cross border health threats from communicable diseases, this has not been the case for incidents involving chemicals and/or environmental events. A variety of collaborative EU projects have been funded over the past 10 years through the Health Programme to address gaps in knowledge on health security and to improve resilience and response to major incidents involving chemicals. This paper looks at the EU Health Programme that underpins recent research activities to address gaps in resilience, planning, responding to and recovering from a cross border chemical incident. It also looks at how the outputs from the research programme will contribute to improving public health management of transnational incidents that have the potential to overwhelm national capabilities, putting this into context with the new requirements as the Decision on serious cross border threats to health as well as highlighting areas for future development. PMID:24679379

  16. Assisted reproduction on treacherous terrain: the legal hazards of cross-border reproductive travel.

    PubMed

    Storrow, Richard F

    2011-11-01

    The growing phenomenon of cross-border reproductive travel has four significant legal dimensions. First, laws that ban or inhibit access to assisted reproductive procedures in one country lead patients and physicians to travel to other countries to acquire, to contribute to or to provide assisted reproductive services. Such laws may include provisions that criminalize those who assist or advise patients to undertake such travel. Second, the law may expressly criminalize crossing borders to obtain, to be a donor for or to perform certain procedures. Third, the law may interfere with the ultimate goal of reproductive travellers by refusing to recognize them as the parents of the child they have crossed borders to conceive. Finally, facilitating cross-border reproductive travel may expose physicians, attorneys and brokers to malpractice or other civil liability. This article explores these legal dimensions of cross-border reproductive care and uses the legal doctrines of proportionality, extraterritoriality and comity to assess the legality and normative validity of governmental efforts to curb or limit assisted reproductive practices. PMID:21962773

  17. Cross-border Portfolio Investment Networks and Indicators for Financial Crises

    PubMed Central

    Joseph, Andreas C.; Joseph, Stephan E.; Chen, Guanrong

    2014-01-01

    Cross-border equity and long-term debt securities portfolio investment networks are analysed from 2002 to 2012, covering the 2008 global financial crisis. They serve as network-proxies for measuring the robustness of the global financial system and the interdependence of financial markets, respectively. Two early-warning indicators for financial crises are identified: First, the algebraic connectivity of the equity securities network, as a measure for structural robustness, drops close to zero already in 2005, while there is an over-representation of high-degree off-shore financial centres among the countries most-related to this observation, suggesting an investigation of such nodes with respect to the structural stability of the global financial system. Second, using a phenomenological model, the edge density of the debt securities network is found to describe, and even forecast, the proliferation of several over-the-counter-traded financial derivatives, most prominently credit default swaps, enabling one to detect potentially dangerous levels of market interdependence and systemic risk. PMID:24510060

  18. Cross-border Portfolio Investment Networks and Indicators for Financial Crises

    NASA Astrophysics Data System (ADS)

    Joseph, Andreas C.; Joseph, Stephan E.; Chen, Guanrong

    2014-02-01

    Cross-border equity and long-term debt securities portfolio investment networks are analysed from 2002 to 2012, covering the 2008 global financial crisis. They serve as network-proxies for measuring the robustness of the global financial system and the interdependence of financial markets, respectively. Two early-warning indicators for financial crises are identified: First, the algebraic connectivity of the equity securities network, as a measure for structural robustness, drops close to zero already in 2005, while there is an over-representation of high-degree off-shore financial centres among the countries most-related to this observation, suggesting an investigation of such nodes with respect to the structural stability of the global financial system. Second, using a phenomenological model, the edge density of the debt securities network is found to describe, and even forecast, the proliferation of several over-the-counter-traded financial derivatives, most prominently credit default swaps, enabling one to detect potentially dangerous levels of market interdependence and systemic risk.

  19. Cross-border portfolio investment networks and indicators for financial crises.

    PubMed

    Joseph, Andreas C; Joseph, Stephan E; Chen, Guanrong

    2014-01-01

    Cross-border equity and long-term debt securities portfolio investment networks are analysed from 2002 to 2012, covering the 2008 global financial crisis. They serve as network-proxies for measuring the robustness of the global financial system and the interdependence of financial markets, respectively. Two early-warning indicators for financial crises are identified: First, the algebraic connectivity of the equity securities network, as a measure for structural robustness, drops close to zero already in 2005, while there is an over-representation of high-degree off-shore financial centres among the countries most-related to this observation, suggesting an investigation of such nodes with respect to the structural stability of the global financial system. Second, using a phenomenological model, the edge density of the debt securities network is found to describe, and even forecast, the proliferation of several over-the-counter-traded financial derivatives, most prominently credit default swaps, enabling one to detect potentially dangerous levels of market interdependence and systemic risk. PMID:24510060

  20. Cross-border reproductive care: market forces in action or market failure? An economic perspective.

    PubMed

    Connolly, Mark

    2011-12-01

    From an economist's perspective, cross-border reproductive care (CBRC) reflects a global market economy bringing together the needs of patients and skills of doctors at an agreed price. From this perspective CBRC is neither wrong nor right, rather it reflects rational economic behaviour of couples to maximize their wellbeing. The major economic criticism of CBRC relates to the costs and risks of multiple pregnancies, as couples paying out-of-pocket may have more embryos transferred than is desirable to optimize their chances of having a live birth. This criticism is valid, suggesting a need to communicate the hidden costs of failing to adequately fund fertility services. However, under some circumstances health authorities may be willing to bear these additional costs if the savings from not providing fertility services are sufficiently large enough to warrant a no-funding policy. Because infertility is often viewed as a low health priority, the likelihood of CBRC persisting is real, particularly as many health services adjust to the challenges of ageing populations and decreased public financing. To counter funding challenges, there is a need to communicate the medical benefits of assisted reproduction and the economic benefits that these children will offer in an era of austerity and ageing populations. PMID:22019620

  1. Intensifying action to address HIV and tuberculosis in Mozambique's cross-border mining sector.

    PubMed

    Barwise, Katy; Lind, Andrew; Bennett, Rod; Martins, Emilia

    2013-01-01

    The southern provinces of Mozambique have some of the world's highest recorded levels of HIV and tuberculosis (TB). They are also characterized by high levels of cross-border migration, particularly to mines in South Africa. Through the Declaration on Tuberculosis in the Mining Sector in August 2012, heads of state of the Southern African Development Community showed an increased commitment to addressing TB and HIV among migrant mine workers, but there is much left to do. This article analyzes the importance of recent policy developments, both regional and national. We report new research from 2011-2012 on health-related attitudes and behaviors of Mozambican mine workers and their families and present an estimate of the financial burden of disease related to migrant mine work for Mozambique's public services and migrant-sending communities. We recommend that the Declaration be operationalized and enforced. Practical measures should include training of health workers in migrants' right to health; user-friendly health information in Portuguese and local languages; building the advocacy capacity of mine workers' representatives; and more attention to social, cultural, and economic factors that affect migrant mine workers' health, including better access to health information and services and livelihoods for wives, widows, and orphans in communities of origin. PMID:24397235

  2. The impact of Border policy effect on cross-border ethnic areas

    NASA Astrophysics Data System (ADS)

    Bie, Q. L.; Zhou, S. Y.; Li, C. S.

    2013-11-01

    Boundary effect analysis is related to border policy making in the cross-border ethnic area. The border effect literatures show that geographic boundaries have obvious impacts on economic, social and cultural relations in both sides of a nation border. Particularly in cross-border ethnic areas, each ethnic group has strong internal spatial structure relevance, and the boundary effect is more obvious. However, most of China's border areas are cross-border ethnic areas, each of border issues is unique. Under this perspective, we analyze the border effects of various boundaries can provide basis for formulating border management policies. For small scale of cross-border ethnic minority areas, how to formulate the boundary management policy is a good question to explore. This paper is demonstrated by a study of the impact of border management policies in Dehong Dai and Jingpo Autonomous Prefecture in Yunnan Province at the border area to Burma. The comparative method is used to analysis the border management policies in past 50 decades for the border area of Yunnan Province .This research aims to define trends within border policy and its influences to national security. This paper also examines Wendy Brown's liberal theory of border management policy. We found that it is not suitable for Sino-Burma border area. The conclusion is that the changes or instability of international economic and political situation has more influence to this cross-border ethnic area, and only innovative policy will be effective in cross-border ethnic area. So the border management policies should reflect the change of international context.

  3. Striking a balance between national interests and patients' needs: cross-border projects meeting European challenges.

    PubMed

    Burger, Renate; Kostera, Thomas

    2010-01-01

    The article deals with the new opportunities for EU member state citizens to go abroad for medical treatment. The European Court of Justice has facilitated the access to medical treatment for EU citizens in other EU states. This development has worried national governments since they feared reduced control in their healthcare systems. The cross-border project "healthacross" between Austria and the Czech Republic however illustrates in which way authorities can respond to patients needs in two different countries. Nevertheless a plethora of administrative and practical problems have to be solved for cross-border co-operation in the provision of healthcare. PMID:21391444

  4. Cross-Border Cholera Outbreaks in Sub-Saharan Africa, the Mystery behind the Silent Illness: What Needs to Be Done?

    PubMed Central

    Mwesawina, Maurice; Baluku, Yosia; Kanyanda, Setiala S. E.; Orach, Christopher Garimoi

    2016-01-01

    Introduction Cross-border cholera outbreaks are a major public health problem in Sub-Saharan Africa contributing to the high annual reported cholera cases and deaths. These outbreaks affect all categories of people and are challenging to prevent and control. This article describes lessons learnt during the cross-border cholera outbreak control in Eastern and Southern Africa sub-regions using the case of Uganda-DRC and Malawi-Mozambique borders and makes recommendations for future outbreak prevention and control. Materials and Methods We reviewed weekly surveillance data, outbreak response reports and documented experiences on the management of the most recent cross-border cholera outbreaks in Eastern and Southern Africa sub-regions, namely in Uganda and Malawi respectively. Uganda-Democratic Republic of Congo and Malawi-Mozambique borders were selected because the countries sharing these borders reported high cholera disease burden to WHO. Results A total of 603 cross-border cholera cases with 5 deaths were recorded in Malawi and Uganda in 2015. Uganda recorded 118 cases with 2 deaths and CFR of 1.7%. The under-fives and school going children were the most affected age groups contributing 24.2% and 36.4% of all patients seen along Malawi-Mozambique and Uganda-DRC borders, respectively. These outbreaks lasted for over 3 months and spread to new areas leading to 60 cases with 3 deaths, CRF of 5%, and 102 cases 0 deaths in Malawi and Uganda, respectively. Factors contributing to these outbreaks were: poor sanitation and hygiene, use of contaminated water, floods and rampant cross-border movements. The outbreak control efforts mainly involved unilateral measures implemented by only one of the affected countries. Conclusions Cross-border cholera outbreaks contribute to the high annual reported cholera burden in Sub-Saharan Africa yet they remain silent, marginalized and poorly identified by cholera actors (governments and international agencies). The under-fives and the

  5. A Multifaceted Approach to Cross-Border Programmes: Expanding Educational Boundaries

    ERIC Educational Resources Information Center

    Harkins, Mary Jane; Nobes, Carolyn

    2008-01-01

    This paper examines how a small university in eastern Canada implemented a form of cross-border education with several partnerships in Bermuda and the Caribbean. The university made the transition from a campus-based university to a more inclusive, global institution. Capacity-building at the institution increased during this time of rapidly…

  6. The International Research Training Group (GRK532): Practicing Cross-Border Postgraduate Education

    ERIC Educational Resources Information Center

    Ehses, Markus; Veith, Michael

    2009-01-01

    In 1999, the International Research Training Group "GRK532" was founded as a pilot project for cross-border European postgraduate education along the German/French/Luxembourg borders. The project consists of an interdisciplinary research programme on synthesis, isolation and characterization of new materials accompanied by an ambitious continuous…

  7. Faculty Perceptions of Success in Cross-Border University-to-University Partnerships

    ERIC Educational Resources Information Center

    Wilson, Elisabeth Anne

    2012-01-01

    In international development the strategy of cross-border university-to-university partnerships is drawing more attention. Funders such as U.S. Agency for International Development are offering large amounts of financial support for the development of university partnerships, networks, and consortiums. Despite the money that is going into…

  8. Cross-Border Higher Education: Global and Local Tensions within Competition and Economic Development

    ERIC Educational Resources Information Center

    Owens, Taya L.; Lane, Jason E.

    2014-01-01

    In this chapter, the authors explore various types of cross-border higher education, considering equity and quality issues within these developments. With a particular focus on international branch campuses, the authors discuss the ways in which global competition for knowledge and economic development interact with tensions at the local level.

  9. Combining Traditional and Virtual Teaching Techniques in Cross-Border Higher Education

    ERIC Educational Resources Information Center

    Alaoutinen, Satu; Voracek, Jan

    2004-01-01

    Our paper describes the important role of virtual education in the process of building a unique cross-border educational environment between Finland and Russia. Against a background of the latest trends in international virtual education, we propose a realistic solution for equal collaboration between two different systems. The final model strives…

  10. Cross-Border Higher Education Collaboration in Europe: Lessons for the "Two Irelands"?

    ERIC Educational Resources Information Center

    Osborne, Robert D.

    2006-01-01

    This article examines three examples of cross-border higher education collaboration in Europe in order to throw light on one European region where such collaboration is only in its early stages of development. The main region examined is the Oresund region covering the Skane area of Southern Sweden centred on Malmo and the Zealand region of…

  11. School Engagement and Parental Involvement: The Case of Cross-Border Students in Singapore

    ERIC Educational Resources Information Center

    Yuen, Celeste Y. M.; Cheung, Alan C. K.

    2014-01-01

    The primary purpose of this paper is to examine the mutual relationship between school engagement of cross-border students (CBS) from Malaysia in Singapore and parental involvement in education. Focus-group interviews were conducted with school personnel, CBS and their non-local counterparts to provide a comprehensive understanding of the…

  12. Professional Development for Cross-Border Managers: New Growth Opportunities for Executive Education

    ERIC Educational Resources Information Center

    Scalberg, Ernest J.

    2013-01-01

    The need of business enterprises for professionals trained for the challenges of cross-border assignments will increase exponentially through the decade. Business schools will be hard pressed to deliver programs with the scope, scale, and effectiveness necessary to address the unique competencies required for cross-cultural understanding and…

  13. The "1+1:Life & Love" Simultaneous Exhibition: Cross-Border Collaboration in the Western Balkans

    ERIC Educational Resources Information Center

    Walters, Diana

    2012-01-01

    This article describes and analyzes a cross-border, "simultaneous exhibition" collaborative project in six post-conflict western Balkan countries. Through a process of collaboration, active learning, and audience development, professional and personal trust developed among eleven museums. Previously identified barriers were overcome and…

  14. The Changing Nature of Volunteering and the Cross-Border Mobility: Where Does Learning Come from?

    ERIC Educational Resources Information Center

    Pantea, Maria-Carmen

    2013-01-01

    This paper revisits the more conventional approaches of volunteering, by looking into the experiences of young people involved in long-term cross-border volunteering in Romania. Drawing on qualitative interviews with European Voluntary Service volunteers, the paper examines how this experience is intersecting their learning trajectories. The…

  15. Cross-border care and healthcare quality improvement in Europe: the MARQuIS research project.

    PubMed

    Suñol, R; Garel, P; Jacquerye, A

    2009-02-01

    Citizens are increasingly crossing borders within the European Union (EU). Europeans have always been free to travel to receive care abroad, but if they wished to benefit from their statutory social protection scheme, they were subject to their local or national legislation on social protection. This changed in 1991 with the European Court of Justice defining healthcare as a service, starting a debate on the right balance between different principles in European treaties: movement of persons, goods and services, versus the responsibility of member states to organise their healthcare systems. Simultaneously, cross-border cooperation has developed between member states. In this context, patient mobility has become a relevant issue on the EU's agenda. The EU funded a number of Scientific Support to Policies (SSP) activities within the Sixth Framework Programme, to provide the evidence needed by EU policy makers to deal with issues that European citizens face due to enhanced mobility in Europe. One SSP project "Methods of Assessing Response to Quality Improvement Strategies" (MARQuIS), focused on cross-border care. It aimed to assess the value of different quality strategies, and to provide information needed when: (1) countries contract care for patients moving across borders; and (2) individual hospitals review the design of their quality strategies. This article describes the European context related to healthcare, and its implications for cross-border healthcare in Europe. The background information demonstrates a need for further research and development in this area. PMID:19188459

  16. Developing Qualitative Coding Frameworks for Educational Research: Immigration, Education and the Children Crossing Borders Project

    ERIC Educational Resources Information Center

    Adair, Jennifer Keys; Pastori, Giulia

    2011-01-01

    The Children Crossing Borders (CCB) study is a polyvocal, multi-sited project on immigration and early childhood education and care in five countries: Italy, Germany, France, England and the USA. The complicated nature of the data pushed us as a group to expand our methodological resources to not only organize the data but also to make it…

  17. Cross-border care and healthcare quality improvement in Europe: the MARQuIS research project

    PubMed Central

    Suñol, R; Garel, P; Jacquerye, A

    2009-01-01

    Citizens are increasingly crossing borders within the European Union (EU). Europeans have always been free to travel to receive care abroad, but if they wished to benefit from their statutory social protection scheme, they were subject to their local or national legislation on social protection. This changed in 1991 with the European Court of Justice defining healthcare as a service, starting a debate on the right balance between different principles in European treaties: movement of persons, goods and services, versus the responsibility of member states to organise their healthcare systems. Simultaneously, cross-border cooperation has developed between member states. In this context, patient mobility has become a relevant issue on the EU’s agenda. The EU funded a number of Scientific Support to Policies (SSP) activities within the Sixth Framework Programme, to provide the evidence needed by EU policy makers to deal with issues that European citizens face due to enhanced mobility in Europe. One SSP project “Methods of Assessing Response to Quality Improvement Strategies” (MARQuIS), focused on cross-border care. It aimed to assess the value of different quality strategies, and to provide information needed when: (1) countries contract care for patients moving across borders; and (2) individual hospitals review the design of their quality strategies. This article describes the European context related to healthcare, and its implications for cross-border healthcare in Europe. The background information demonstrates a need for further research and development in this area. PMID:19188459

  18. Engaging in cross-border power exchange and trade via the Arab Gulf states power grid

    SciTech Connect

    Fraser, Hamish; Al-Asaad, Hassan K.

    2008-12-15

    When construction is complete in 2010, an interconnector established among the Gulf states will enhance their electricity infrastructure while increasing reliability and security of power supply. The interconnector will also foster exchanges of energy and facilitate cross-border trade. (author)

  19. Cross-Border Partnerships in Higher Education: Strategies and Issues. International Studies in Higher Education

    ERIC Educational Resources Information Center

    Sakamoto, Robin, Ed.; Chapman, David, Ed.

    2012-01-01

    "Cross-border Partnerships in Higher Education" looks beyond student and faculty exchanges to examine the myriad ways international colleges and universities work together as institutions. These partnerships have involved the creation of branch campuses, joint research and technology initiatives, collaboration in strengthening institutional…

  20. Regulating Cross-Border Higher Education: A Case Study of the United States

    ERIC Educational Resources Information Center

    Lane, Jason E.; Kinser, Kevin; Knox, Daniel

    2013-01-01

    In an increasing number of nations, foreign education providers are becoming part of the educational landscape. This aspect of cross-border higher education raises many questions about how such activities are regulated, particularly the role of the importing and exporting governments. Drawing on a principal-agent framework, this study uses the…

  1. Reconsidering Privatization in Cross-Border Engagements: The Sometimes Public Nature of Private Activity

    ERIC Educational Resources Information Center

    Lane, Jason E.; Kinser, Kevin

    2011-01-01

    Privatization trends in higher education have typically been analyzed from the perspective of the institution and its relationship with the sponsoring state. The recent phenomenon of international cross-border higher education, however, represents a more complicated picture of privatization. Geographic separation from the sponsoring state is an…

  2. Cross-Border Collaboration in History among Nordic Students: A Case Study about Creating Innovative ICT Didactic Models

    ERIC Educational Resources Information Center

    Spante, Maria; Karlsen, Asgjerd Vea; Nortvig, Anne-Mette; Christiansen, Rene B.

    2014-01-01

    Gränsöverskridande Nordisk Undervisning/Utdanelse (GNU, meaning Cross-Border Nordic Education), the larger Nordic project, under which this case study was carried out, aims at developing innovative, cross-border teaching models in different subject domains in elementary school, including mathematics, language, science, social studies and history.…

  3. Quality requirements for cross-border care in Europe: a qualitative study of patients’, professionals’ and healthcare financiers’ views

    PubMed Central

    Groene, O; Poletti, P; Vallejo, P; Cucic, C; Klazinga, N; Suñol, R

    2009-01-01

    Background: In the past decade the issue of patient mobility has emerged on the European health policy agenda. Although the volume of patients crossing borders to obtain healthcare is low, it is increasing continuously and, due to its legal, financial and medical implications, has generated considerable interest among health policy and other decision makers. However, there is little information available on the safety and patient-centredness of cross-border care and neither governments nor citizens have an explicit basis for comparing healthcare delivery in Europe. Methods: This study investigated the viewpoints of patients, professionals and healthcare financiers on the safety and patient-centredness of cross-border care. Qualitative interviews were carried out during 2005 and early 2006 with 40 patients, 30 professionals (doctors, nurses and managers) and 3 healthcare-financing bodies. Results: Although cross-border care has become a common issue in many European countries, there remain uncertainties on the side of each of the parties addressed—patients, professionals and financiers—with regard to the provision of cross-border care. One of the most striking results of this project is the current lack of research on systematic knowledge on the quality of cross-border care. Conclusion: Many of the issues identified through this research may have a potential impact on the quality and safety of cross-border care and will support further investigation and help shape the health policy agenda on patients crossing borders in European Union countries. PMID:19188456

  4. Guidelines for Quality Provision in Cross-Border Higher Education: Where Do We Strand? OECD Education Working Papers, No. 70

    ERIC Educational Resources Information Center

    Vincent-Lancrin, Stephan; Pfotenhauer, Sebastian

    2012-01-01

    The "Guidelines for Quality Provision in Cross-Border Higher Education" were developed and adopted to support and encourage international cooperation and enhance the understanding of the importance of quality provision in cross-border higher education. The purposes of the "Guidelines" are to protect students and other stakeholders from low-quality…

  5. Cross-Border Trade Enhancement Act of 2013

    THOMAS, 113th Congress

    Sen. Cornyn, John [R-TX

    2013-01-30

    01/30/2013 Read twice and referred to the Committee on Homeland Security and Governmental Affairs. (text of measure as introduced: CR S401-402) (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  6. Cross-border radon index map 1:100 000 Lausitz - Jizera - Karkonosze - Region (northern part of the Bohemian Massif).

    PubMed

    Barnet, Ivan; Pacherová, Petra; Preusse, Werner; Stec, Bartosz

    2010-10-01

    The first cross-border map describing the radon (Rn) risk from bedrock was assembled in the northern part of the Bohemian Massif at a scale 1:100 000. The map covers the area of Lausitz (Germany), Karkonosze (Czech Republic and Poland) and Jizera (Czech Republic). The map is based on 818 measurements of soil gas Rn in rock types of Precambrian to Mesozoic age with variable geology. Geographic information system (GIS) processing enabled a good coincidence of soil gas Rn concentrations between data from all three countries in lithologically adjacent rock types as well as the direct correlation to georeferenced indoor Rn values, which was tested using the Czech indoor Rn data. The method of data processing can contribute to assembling the European Geogenic Radon Map. PMID:20022148

  7. Growing families in a shrinking world: legal and ethical challenges in cross-border surrogacy.

    PubMed

    Crockin, Susan L

    2013-12-01

    Crossing national borders to have children is a rapidly growing phenomenon, fuelled by restrictions on access and technologies in some countries and for some patients, by high costs in others, and all generating a burgeoning multibillion dollar international industry. Cross-border gestational surrogacy is one form of family building that challenges legal, policy and ethical norms between countries and puts both intended parents and gestational surrogates at risk, and can leave the offspring of these arrangements vulnerable in a variety of ways, including parent-child, immigration and citizenship status. The widely varying political, religious and legal views amongst countries make line drawing and rule making challenging. This article reviews recent court decisions about and explores the legal dimensions of cross-border surrogacy. PMID:24120561

  8. OpenNCP: a novel framework to foster cross-border e-Health services.

    PubMed

    Fonseca, Marcelo; Karkaletsis, Kostas; Cruz, Isabel A; Berler, Alexander; Oliveira, Ilídio C

    2015-01-01

    The continuity of cross-border health care in the European Union depends on the ability to set up shared practices with respect to patient data exchange across Member States. This flow of data must comply with demanding security, legal and interoperability requirements, as defined by the epSOS project specifications. In this paper, we describe the OpenNCP framework that offers a comprehensive set of interoperability services to enable national and regional e-Health platforms to set up cross-border health information networks compliant with epSOS, with minimal adaptation of the existing infrastructure. The OpenNCP, available as open source software, has been adopted in 10 Member States, allowing them to securely interconnect their eHealth infrastructures. PMID:25991222

  9. Cross border semantic interoperability for clinical research: the EHR4CR semantic resources and services.

    PubMed

    Daniel, Christel; Ouagne, David; Sadou, Eric; Forsberg, Kerstin; Gilchrist, Mark Mc; Zapletal, Eric; Paris, Nicolas; Hussain, Sajjad; Jaulent, Marie-Christine; Md, Dipka Kalra

    2016-01-01

    With the development of platforms enabling the use of routinely collected clinical data in the context of international clinical research, scalable solutions for cross border semantic interoperability need to be developed. Within the context of the IMI EHR4CR project, we first defined the requirements and evaluation criteria of the EHR4CR semantic interoperability platform and then developed the semantic resources and supportive services and tooling to assist hospital sites in standardizing their data for allowing the execution of the project use cases. The experience gained from the evaluation of the EHR4CR platform accessing to semantically equivalent data elements across 11 European participating EHR systems from 5 countries demonstrated how far the mediation model and mapping efforts met the expected requirements of the project. Developers of semantic interoperability platforms are beginning to address a core set of requirements in order to reach the goal of developing cross border semantic integration of data. PMID:27570649

  10. Cross border semantic interoperability for clinical research: the EHR4CR semantic resources and services

    PubMed Central

    Daniel, Christel; Ouagne, David; Sadou, Eric; Forsberg, Kerstin; Gilchrist, Mark Mc; Zapletal, Eric; Paris, Nicolas; Hussain, Sajjad; Jaulent, Marie-Christine; MD, Dipka Kalra

    2016-01-01

    With the development of platforms enabling the use of routinely collected clinical data in the context of international clinical research, scalable solutions for cross border semantic interoperability need to be developed. Within the context of the IMI EHR4CR project, we first defined the requirements and evaluation criteria of the EHR4CR semantic interoperability platform and then developed the semantic resources and supportive services and tooling to assist hospital sites in standardizing their data for allowing the execution of the project use cases. The experience gained from the evaluation of the EHR4CR platform accessing to semantically equivalent data elements across 11 European participating EHR systems from 5 countries demonstrated how far the mediation model and mapping efforts met the expected requirements of the project. Developers of semantic interoperability platforms are beginning to address a core set of requirements in order to reach the goal of developing cross border semantic integration of data. PMID:27570649

  11. Assessing and improving cross-border chemical incident preparedness and response across Europe.

    PubMed

    Stewart-Evans, James; Hall, Lisbeth; Czerczak, Slawomir; Manley, Kevin; Dobney, Alec; Hoffer, Sally; Pałaszewska-Tkacz, Anna; Jankowska, Agnieszka

    2014-11-01

    Good practices in emergency preparedness and response for chemical incidents include practices specific to the different functions of exposure assessment (e.g., within the monitoring function, the use of mobile monitoring equipment; within the modelling function, the use of rapid dispersion models with integrated mapping software) and generic practices to engage incident response stakeholders to maximise exposure assessment capabilities (e.g., sharing protocols and pre-prepared information and multi-agency training and exercising). Such practices can optimise cross-border collaboration. A wide range of practices have been implemented across MSs during chemical incident response, particularly during incidents that have cross-border and trans-boundary impacts. This paper proposes a self-assessment methodology to enable MSs, or organisations within MSs, to examine exposure assessment capabilities and communication pathways between exposure assessors and public health risk assessors. Where gaps exist, this methodology provides links to good practices that could improve response, communication and collaboration across local, regional and national borders. A fragmented approach to emergency preparedness for chemical incidents is a major obstacle to improving cross-border exposure assessment. There is no one existing body or structure responsible for all aspects of chemical incident preparedness and response in the European Union. Due to the range of different organisations and networks involved in chemical incident response, emergency preparedness needs to be drawn together. A number of recommendations are proposed, including the use of networks of experts which link public health risk assessors with experts in exposure assessment, in order to coordinate and improve chemical incident emergency preparedness. The EU's recent Decision on serious cross-border threats to health aims to facilitate MSs' compliance with the International Health Regulations, which require

  12. A population based economic analysis of cross-border payments for fertility services in Luxembourg

    PubMed Central

    Jones, Christopher A.; Keith, Louis G.; Bocquet, Valery; Arendt, Jacques; Smit, Jean; Berchem, Guy; Lair, Marie-Lise

    2010-01-01

    Objective: How fertility patients utilise assisted reproductive services can depend on how easy it is to access such services locally. Little data exist to document the extent of economic outflow that accompanies cross-border patient travel specifically for medical procedures that cannot be obtained in country. Methods: In this investigation, data from Luxembourg’s social security agency were used to audit medical reimbursement payments for IVF within and outside the Grand Duchy of Luxembourg between 1998 and 2007. This study interval offered an opportunity to track IVF expenditures before and after IVF was made freely available within the Grand Duchy. Results: Reimbursement authorizations to IVF providers outside Luxembourg remained stable or slightly elevated until 2005, two years after Luxembourg opened its first IVF centre. Once established in Luxembourg, annual utilisation of the domestic IVF service generally trended upwards (217 cycles in 2003 vs. 569 in 2008). Meanwhile, payments to foreign IVF clinics declined steadily after 2005 reflecting a diminishing number of Luxembourg patients seeking cross-border IVF treatment. Conclusion: These data represent the most comprehensive register of cross-border reproductive visits in Europe. Since Luxembourg fully reimburses its citizens for health-related expenses irrespective of where the medical service is obtained, the current investigation renders the “out of pocket” effect of IVF fees irrelevant and characterise consumption of elective medical treatments as a function of service site. Further studies are needed to determine if these findings will generalise to other geographic regions. PMID:20941372

  13. Cross-border-assisted reproduction: a qualitative account of UK travellers' experiences.

    PubMed

    Hudson, Nicky; Culley, Lorraine; Blyth, Eric; Norton, Wendy; Pacey, Allan; Rapport, Frances

    2016-06-01

    Surveys on patients' experiences of cross-border fertility treatment have reported a range of positive and challenging features. However, the number of such studies is limited, and there is no detailed qualitative account of the experiences of UK patients who travel overseas for fertility treatment. The present study used a cross-sectional, qualitative design and in-depth interviews. Fifty-one participants (41 women and 10 men, representing 41 treatment 'cases') participated in semi-structured interviews. The experiences reported were broadly positive with a large proportion of participants (39 cases, 95%) citing a favourable overall experience with only two cases (5%) reporting a more negative experience. Thematic analysis revealed 6 major categories and 20 sub-categories, which described the positive and challenging aspects of cross-border fertility travel. The positive aspects were represented by the categories: 'access', 'control' and 'care and respect'. The more challenging aspects were categorized as 'logistics and coordination of care', 'uncertainty' and 'cultural dissonance'. The study confirms findings from others that despite some challenges, there is a relatively high level of patient satisfaction with cross-border treatment with participants able to extend the boundaries of their fertility-seeking trajectories and in some cases, regain a sense of control over their treatment. PMID:27144511

  14. "The perfect business": human trafficking and Lao-Thai cross-border migration.

    PubMed

    Molland, Sverre

    2010-01-01

    Over the past few years some governments and development organizations have increasingly articulated cross-border mobility as "trafficking in persons". The notion of a market where traffickers prey on the "supply" of migrants that flows across international borders to meet the "demand" for labour has become a central trope among anti-trafficking development organizations. This article problematizes such economism by drawing attention to the oscillating cross-border migration of Lao sex workers within a border zone between Laos and Thailand. It illuminates the incongruity between the recruitment of women into the sex industry along the Lao-Thai border and the market models that are employed by the anti-trafficking sector. It discusses the ways in which these cross-border markets are conceived in a context where aid programming is taking on an increasingly important role in the politics of borders. The author concludes that allusions to ideal forms of knowledge (in the guise of classic economic theory) and an emphasis on borders become necessary for anti-trafficking programmes in order to make their object of intervention legible as well as providing post-hoc rationalizations for their continuing operation. PMID:20882708

  15. Potential Risk of Regional Disease Spread in West Africa through Cross-Border Cattle Trade

    PubMed Central

    Dean, Anna S.; Fournié, Guillaume; Kulo, Abalo E.; Boukaya, G. Aboudou; Schelling, Esther; Bonfoh, Bassirou

    2013-01-01

    Background Transboundary animal movements facilitate the spread of pathogens across large distances. Cross-border cattle trade is of economic and cultural importance in West Africa. This study explores the potential disease risk resulting from large-scale, cross-border cattle trade between Togo, Burkina Faso, Ghana, Benin, and Nigeria for the first time. Methods and Principal Findings A questionnaire-based survey of livestock movements of 226 cattle traders was conducted in the 9 biggest cattle markets of northern Togo in February-March 2012. More than half of the traders (53.5%) operated in at least one other country. Animal flows were stochastically simulated based on reported movements and the risk of regional disease spread assessed. More than three quarters (79.2%, range: 78.1–80.0%) of cattle flowing into the market system originated from other countries. Through the cattle market system of northern Togo, non-neighbouring countries were connected via potential routes for disease spread. Even for diseases with low transmissibility and low prevalence in a given country, there was a high risk of disease introduction into other countries. Conclusions By stochastically simulating data collected by interviewing cattle traders in northern Togo, this study identifies potential risks for regional disease spread in West Africa through cross-border cattle trade. The findings highlight that surveillance for emerging infectious diseases as well as control activities targeting endemic diseases in West Africa are likely to be ineffective if only conducted at a national level. A regional approach to disease surveillance, prevention and control is essential. PMID:24130721

  16. PARENT joint action: increasing the added value of patient registries in a cross-border setting.

    PubMed

    Meglič, Matic; Doupi, Persephone; Pristaš, Ivan; Skalkidis, Yannis; Zaletel, Metka; Orel, Andrej

    2013-01-01

    Patient registries are poorly interoperable and as a result data exchange or aggregation across organizations, regions and countries for secondary purposes (i.e. research and public health) is difficult to perform. PARENT Joint Action aims to provide EU Member States with a set of guidelines, recommendations and tools to support setting-up, management and governance of interoperable patient registries, thus helping EU Member States to drive down cost and interoperability risks of patient registries as well as improving secondary us-age of registry data in a cross-border setting. PMID:23920935

  17. Laser Monitoring System for Crossing Border Based on the Short Message Service

    NASA Astrophysics Data System (ADS)

    Wen-jin, Zhu; Dao-qing, Zhou; Lu-jun, Zhou

    2016-02-01

    A warning system applied to long-distance crossing-border monitoring by the technology SMS and IR(infrared) laser was introduced. Master station, which was based on PC and module TC35i, would transmit or receive short message by COM communication. Monitoring station watched the forbidden zone produced by an IR warning apparatus. CMOS chip AT89C52 incepted the warning information, and transmitted out a warning message by module TC35i. Circumstance of hardware and software was provided and programming was described also. The system overcame the shortages and restrictions on conventional communication and monitoring system.

  18. The green grass on the other side: crossing borders to obtain infertility treatment

    PubMed Central

    Pennings, G.

    2009-01-01

    Background: Cross-border reproductive care, also known as reproductive tourism, is a growing phenomenon. More and more treatments, or parts thereof, are taking place in countries other than the patient’s home country. Results: The phenomenon is presented as a safety valve that takes the pressure of the restrictive legislation and simultaneously allows people to obtain the treatment they desire. These movements also hold a number of risks, both for the travelling patients and for the gamete donors and infertile couples in the country of destination. Finally, the possible role of patient organisations and medical professional societies is discussed. PMID:25478065

  19. Volume and diagnosis: an approach to cross-border care in eight European countries

    PubMed Central

    Vallejo, P; Suñol, R; Van Beek, B; Lombarts, M J M H; Bruneau, C; Vlček, F

    2009-01-01

    Objectives: Mobility of patients is a pertinent issue on the European Union’s agenda. This study aimed to estimate the volume and main diagnoses of cross-border care in eight European countries, in order to provide policy makers with background information about the nature of patient mobility in Europe. Methods: This article reports the combined findings from three independent studies that compiled self-reported information on admissions data and main diagnoses from more than 200 hospitals in eight European countries. Results: The average volume of cross-border patients accounted for less than 1% of total admissions in the hospitals studied here. Diseases of the circulatory system (mainly acute myocardial infarction) and fractures were the most common reasons for hospitalisation of European patients abroad. Deliveries and other diagnoses related to pregnancy, pneumonia, appendicitis and other diseases of the digestive system, aftercare procedures, and disorders of the eye and adnexa were also common diagnoses for this population. Conclusions: Hospitals should reinforce their efforts to adapt the care provided to the needs of foreign patients in treatment areas that cover the most frequent pathologies identified in this population. PMID:19188467

  20. Cross-border assisted reproduction care in Asia: implications for access, equity and regulations.

    PubMed

    Whittaker, Andrea

    2011-05-01

    This paper gives an overview of the global commercialised market in assisted reproduction treatment in low-resource countries in Asia and raises concerns about access and equity, the potential commercial exploitation of the bodies of subaltern women to service the demand for donated ova and surrogate pregnancy, and the need for protections through regulations. A lack of systematic data about cross-border reproductive care is a significant obstacle to debate and policy intervention. Little is known about the extent, experience or conditions of cross-border reproductive care outside of Europe and the United States. Further research is needed in Asia on the local effects of this trade upon local health systems, couples seeking care, and those women whose body tissues and nurturing capacities facilitate it. More attention needs to be paid to the provision of publicly funded reproductive health services to address the inequitable distribution of treatment and to investigate means to regulate this trade by governments, international NGOs, professional organisations and civil society groups in developing countries. The global trade in assisted reproduction challenges us to balance the rights of individuals to pursue health care across national borders with the rights of those providing services to meet their needs, especially vulnerable groups in situations of economic disparity. PMID:21555091

  1. Cross-border ties and self-rated health status for young Latino adults in Southern California

    PubMed Central

    Torres, Jacqueline M.

    2013-01-01

    At the same time that health researchers have mostly ignored the cross-border nature of immigrant social networks, scholars of immigrant “transnationalism” have left health largely unexamined. This paper addresses this gap by analyzing the relationship between cross-border ties and self-rated health status for young Latino adults living in the greater Los Angeles area (n=1268). Findings based on an ordered logistic regression analysis suggest that cross-border relationships may have both protective and adverse effects on overall health status. Specifically, those reporting a period of extended parental cross-border separation during childhood have lower odds of reporting better categories of self-rated health, all else equal. Conversely, a significant positive association was found between having a close relative living abroad and self-rated health status for foreign-born respondents when interacted with immigrant generation (foreign versus U.S.-born). Given the findings of significant negative and positive relationships between cross-border ties and self-rated general health status, I discuss the implications for future research on the social determinants of immigrant health. PMID:23312794

  2. Geo-Located Tweets. Enhancing Mobility Maps and Capturing Cross-Border Movement.

    PubMed

    Blanford, Justine I; Huang, Zhuojie; Savelyev, Alexander; MacEachren, Alan M

    2015-01-01

    Capturing human movement patterns across political borders is difficult and this difficulty highlights the need to investigate alternative data streams. With the advent of smart phones and the ability to attach accurate coordinates to Twitter messages, users leave a geographic digital footprint of their movement when posting tweets. In this study we analyzed 10 months of geo-located tweets for Kenya and were able to capture movement of people at different temporal (daily to periodic) and spatial (local, national to international) scales. We were also able to capture both long and short distances travelled, highlighting regional connections and cross-border movement between Kenya and the surrounding countries. The findings from this study has broad implications for studying movement patterns and mapping inter/intra-region movement dynamics. PMID:26086772

  3. Not a flat world: the future of cross-border reproductive care.

    PubMed

    Franklin, Sarah

    2011-12-01

    Cross-border reproductive care (CBRC) raises new issues for both medicine and social science, as well as analytical and methodological challenges. On the one hand, this phenomenon extends well-established practices, such as family formation, in new ways, for example through new technologies. Similarly, CBRC could be described as a form of globalization. Yet this sector also departs from established patterns of reproductivity, for example by combining reproductive services and substances transnationally. In this way, CBRC also changes the understanding of globalization, revealing that it is not necessarily producing a newly 'flat' world, but instead reproducing a traditionally stratified one. These aspects of CBRC must be kept in mind in the struggle to define best practice. PMID:22177262

  4. Avoiding another directive: the unstable politics of European Union cross-border health care law.

    PubMed

    Greer, Scott L

    2013-10-01

    The European Union’s (EU) 2011 Directive on cross-border patient mobility codifies the right of any EU citizen to travel abroad for treatment and be reimbursed on the same terms as they would be at home. Governments hoped it would end the string of court cases that had reshaped EU health law but this article argues that it is likely to produce yet more judicial challenges. Patient mobility is an attractive idea with unclear definitions and divergent implementation. In many cases, providers, insurers and governments will not communicate and leave the patient with a bill – almost daring the patient to sue, and the courts to make more policy. Governments should try to prevent this by investing in coordination and alternative redress for patients who might otherwise sue. PMID:23425573

  5. [Transnational solidarity? Cross-border heath-care in the European Union].

    PubMed

    Schmucker, R

    2010-03-01

    The responsibilities of the European Union surrounding public health are concentrated on co-ordinating and complementary practices. A mandatory European harmonization of standards and policies is in effect in only a few areas such as pharmaceutical authorization and health protection at the workplace. The implementation of single market rights over the national health-care systems (negative integration) is growing at the European level. This has ambivalent repercussions. Whilst the rights of patients on the basis of the four fundamental freedoms in the context of cross-border health-care have got stronger, national governments see themselves confronted with a limitation of scope for their health-care policies. The basic principles of the integration project place European pressure on national governments. They are subject to sanctions if their policies are not directly in accordance with the single market concept. PMID:20191439

  6. "Cycling overseas": care, commodification, and stratification in cross-border reproductive travel.

    PubMed

    Whittaker, Andrea; Speier, Amy

    2010-10-01

    Cross-border reproductive travel involves the movement of patients to undertake assisted reproductive treatment through technologies, such as in vitro fertilization and associated procedures otherwise denied to them due to cost, access, or regulatory restrictions. Based on fieldwork in Thailand, the United States, and the Czech Republic, we explore the commodification of reproductive bodies within this trade and the reduction of the nurturing affective labor of reproduction to exchange value. Second, we examine the intensification and globalization of the stratification of reproduction. These inequalities are illustrated though discussion of the trade in poor women's bodies for surrogacy and ova donation. Even reproductive body parts, ova, sperm, and embryos are stratified-marketed according to place of origin, the characteristics of their donors, and gender. PMID:21082483

  7. Geo-Located Tweets. Enhancing Mobility Maps and Capturing Cross-Border Movement

    PubMed Central

    Blanford, Justine I.; Huang, Zhuojie; Savelyev, Alexander; MacEachren, Alan M.

    2015-01-01

    Capturing human movement patterns across political borders is difficult and this difficulty highlights the need to investigate alternative data streams. With the advent of smart phones and the ability to attach accurate coordinates to Twitter messages, users leave a geographic digital footprint of their movement when posting tweets. In this study we analyzed 10 months of geo-located tweets for Kenya and were able to capture movement of people at different temporal (daily to periodic) and spatial (local, national to international) scales. We were also able to capture both long and short distances travelled, highlighting regional connections and cross-border movement between Kenya and the surrounding countries. The findings from this study has broad implications for studying movement patterns and mapping inter/intra-region movement dynamics. PMID:26086772

  8. Cross-border health care in the European Union: recent legal implications of 'Decker and Kohll'.

    PubMed

    Hermans, H E

    2000-11-01

    In the European Union a growing number of citizens are receiving medical treatment in a country other than the one in which they are resident. This concerns migrant (frontier) workers, emergency treatment and preauthorized care. Since 1998 a 'new category' can be discerned of persons going abroad without prior authorization on the basis of the Decker and Kohll rulings of the EC Court of Justice. Local payers would, because of the Decker and Kohll judgements, be obliged to reimburse patients who travel abroad to circumvent the existing problems with the authorization rules. During the past years studies within specific so-called Euregions have been performed to analyse cross-border flows and provide some more insight in the practical and health policy consequences of the Decker and Kohll judgements. The abolishment of current preauthorization is pleaded for by many respondents in these studies. Waiting lists form an important motive (in particular in the Netherlands) to consume health care in another Member State (Belgium and Germany). The familiarity with (health care in) Belgium eases the unofficial Decker and Kohll route. However, when some parts of the health care services seem to be more expensive in the other Member State, the patient has to pay the difference. New court cases are pending before the European Court of Justice. These cases raise new issues such as the tenability of 'benefits-in-kind' systems. So far, the Decker and Kohll rulings could be seen as an incentive to enhance access to cross-border health care in border areas. PMID:11133126

  9. Medical sociology as a heuristic instrument for medical tourism and cross-border healthcare: Comment on "International patients on operation vacation - perspectives of patients travelling to Hungary for orthopedic treatments".

    PubMed

    Mainil, Tomas

    2015-04-01

    In this commentary, we establish a relationship between medical sociology and the study of medical tourism and cross-border healthcare by introducing Ronald Andersen's behavioral model of healthcare use, and linking this model to the recent empirical study of Kovacs et al. on patients travelling to Hungary for orthopedic treatment. Finally, we plead for more measurement in the field of patient mobility. PMID:25844386

  10. Crossing Borders in Educational Innovation: Framing Foreign Examples in Discussing Comprehensive Education in the Netherlands, 1969-1979

    ERIC Educational Resources Information Center

    Greveling, Linda; Amsing, Hilda T. A.; Dekker, Jeroen J. H.

    2014-01-01

    In the Netherlands, crossing borders to study comprehensive schools was an important strategy in the 1970s, a decisive period for the start and the end of the innovation. According to policy-borrowing theory, actors that engage in debating educational issues are framing foreign examples of comprehensive schooling to convince their audiences.…

  11. Regulating the New Borderlands: An Event History Analysis of State Cross-Border Distance Higher Education Policy Adoption

    ERIC Educational Resources Information Center

    Milner, Patricia E.

    2013-01-01

    Cross-border state distance higher education policy is a complex web of complicated and often contradictory regulations stretching across 50 states and 14 US territories. This study examined the applicability of strategic choice theory to state higher education policy innovation in the context of the adoption of polices that regulate the distance…

  12. Global Connections to Global Partnerships: Navigating the Changing Landscape of Internationalism and Cross-Border Higher Education

    ERIC Educational Resources Information Center

    Olcott, Don, Jr.

    2009-01-01

    The purpose of this article is to provide continuing higher education leaders with a comprehensive overview of the major considerations for doing business in the global market. Included is an analysis of the driving forces in global higher education and current trends in cross-border programs and a brief review of activities that may be part of a…

  13. Cross-Border University Networks as a Development Strategy: Lessons from Three University Networks Focused on Emerging Pandemic Threats

    ERIC Educational Resources Information Center

    Chapman, David W.; Pekol, Amy; Wilson, Elisabeth

    2014-01-01

    Cross-border university networks have recently been advocated as an effective strategy for addressing national and regional development needs while simultaneously strengthening the capacity of the participating institutions. While university-to-university partnerships generally involve two institutions collaborating to accomplish a particular…

  14. The Public Good, the Market, and Academic Capitalism: U.S. Cross-Border Higher Education in Panama

    ERIC Educational Resources Information Center

    Montoto, Lisette

    2013-01-01

    In recent years, U.S. colleges and universities have begun to extend their international presence through different models of cross-border higher education. This research explores three models of U.S. higher education in Panama City, Panama: a branch campus, a franchise model and merger/acquisition models. Using a qualitative approach, this study…

  15. The Influence and Implications of Chinese Culture in the Decision to Undertake Cross-Border Higher Education

    ERIC Educational Resources Information Center

    Bodycott, Peter; Lai, Ada

    2012-01-01

    Little is known about how a family in the Peoples Republic of China (PRC) makes decisions on cross-border study. International marketers and managers in higher education turn to research based on Chinese student preferences. However, such research ignores cultural traditions steeped in Confucian ideals of family and the subsequent roles and…

  16. The Labor Market Outcomes of Two Forms of Cross-Border Higher Education Degree Programs between Malaysia and Japan

    ERIC Educational Resources Information Center

    Koda, Yoshiko; Yuki, Takako

    2013-01-01

    This paper examines the labor market outcomes of two different forms of cross-border higher education degree programs (i.e., study abroad vs. twinning) between Malaysia and Japan. Based on a new graduate survey, it examines whether there are differences in the labor market outcomes between the two programs and what other factors have significant…

  17. 76 FR 66872 - International Services Surveys: Amendments to the BE-150, Quarterly Survey of Cross-Border Credit...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-28

    ...This proposed rule would amend the regulations of the Bureau of Economic Analysis, Department of Commerce (BEA) to add new entities that would be required to report information on the BE-150, Quarterly Survey of Cross-Border Credit, Debit, and Charge Card Transactions. Specifically, this rule would expand the covered entities to include companies that operate personal identification number......

  18. Technological and cross-border mixture value chain of science and engineering of multi-integrative mechatronics-integronics-adaptronics

    NASA Astrophysics Data System (ADS)

    Gheorghe, Gh. Ion; Popan, Gheorghe

    2013-10-01

    This scientific paper presents in national premiere and in original concept of the author, the scientific national and the author's original concept, the technological and cross-border mixture value chain of science and engineering of multi-integrative Mechatronics-Integronics-Adaptronics, as high-tech vector support development, for viability and sustainability of a new intelligent and competitive labour market.

  19. Quality in Cross-Border Higher Education and Challenges for the Internationalization of National Quality Assurance Agencies in the Asia-Pacific Region: The Taiwanese Experience

    ERIC Educational Resources Information Center

    Hou, Angela Yung-chi

    2014-01-01

    Cross-border higher education has created a need to build capacity -- particularly in the internationalization dimension -- for national quality assurance agencies to evaluate cross-border education provided by foreign educational providers, or jointly by local and foreign institutions. This is quickly becoming a key issue in the Asia-Pacific…

  20. Cross-Border Higher Education for Labor Market Needs: Mobility of Public-Funded Malaysian Students to Japan over Years. JICA-RI Working Paper. No. 29

    ERIC Educational Resources Information Center

    Koda, Yoshiko; Yuki, Takako; Hong, Yeeyoung

    2011-01-01

    As globalization and the knowledge economy spreads, the demand for highly skilled workers has increased and developing countries are engaged in cross-border higher education to develop high level human resources for their nations. Using data on a cross-border higher education program between Malaysia and Japan, namely the Higher Education Loan…

  1. Trends of cross-border mobility of physicians and nurses between Portugal and Spain

    PubMed Central

    2013-01-01

    Context Health workforce cross-border mobility has an impact not only on individual health workers, but also on how health services are organized, planned, and delivered. This paper presents the results of a study of current mobility trends of health professionals along the borders between Portugal and Spain. The objective was to describe the profile of mobile physicians and nurses; to elicit the opinions of employers on mobility factors; to describe incentive policies to retain or attract health professionals; and to collect and analyse employers’ opinions on the impact of this mobility on their health services. Methods Phone interviews of key informants were used to collect relevant data. The interviews were conducted during December 2010 and January 2011 in health organizations along the border of the two countries. In Portugal and Spain, four and 13 organizations were selected, respectively. Interviews were obtained in all the Portuguese organizations and in four of the Spanish organizations. Results Findings suggest that cross-border mobility between the two countries has decreased. From Spain to Portugal, mobility trends are mainly of physicians who seek professional development in the form of specialization, the availability of positions, better salaries, and the perceived good living conditions. The mobility of nurses lasted until 2008, when reforms improved working conditions in Spain and contributed to reversing the flow. Since then, there has been an increase of Portuguese nurses going to Spain seeking better working conditions or simply a job. Portuguese nurses as well as Spanish physicians are well considered in terms of professionalism and qualifications by their Spanish and Portuguese hosts, respectively. Conclusions There is a deficit of valid data on the health workforce in general. The present study allowed further exploration of the reality of the mobility trends between Portugal and Spain. At present, the mobility trends are mainly of Spanish

  2. Measuring additive interaction using odds ratios

    PubMed Central

    Kalilani, Linda; Atashili, Julius

    2006-01-01

    Interaction measured on the additive scale has been argued to be better correlated with biologic interaction than when measured on the multiplicative scale. Measures of interaction on the additive scale have been developed using risk ratios. However, in studies that use odds ratios as the sole measure of effect, the calculation of these measures of additive interaction is usually performed by directly substituting odds ratios for risk ratios. Yet assessing additive interaction based on replacing risk ratios by odds ratios in formulas that were derived using the former may be erroneous. In this paper, we evaluate the extent to which three measures of additive interaction – the interaction contrast ratio (ICR), the attributable proportion due to interaction (AP), and the synergy index (S), estimated using odds ratios versus using risk ratios differ as the incidence of the outcome of interest increases in the source population and/or as the magnitude of interaction increases. Our analysis shows that the difference between the two depends on the measure of interaction used, the type of interaction present, and the baseline incidence of the outcome. Substituting odds ratios for risk ratios, when calculating measures of additive interaction, may result in misleading conclusions. Of the three measures, AP appears to be the most robust to this direct substitution. Formulas that use stratum specific odds and odds ratios to accurately calculate measures of additive interaction are presented. PMID:16620385

  3. Reprint of: Dream vs. reality: seven case-studies on the desirability and feasibility of cross-border hospital collaboration in Europe.

    PubMed

    Glinos, Irene A; Baeten, Rita

    2015-01-01

    Despite being a niche phenomenon, cross-border health care collaboration receives a lot of attention in the EU and figures visibly on the policy agenda, in particular since the policy process which eventually led to the adoption of Directive 2011/24/EU. One of the underlying assumptions is that cross-border collaboration is desirable, providing justification to both the European Commission and to border-region stakeholders for promoting it. The purpose of this paper is to question this assumption and to examine the role of actors in pushing (or not) for cross-border collaboration. The analysis takes place in two parts. First, the EU policies to promote cross-border collaboration and the tools employed are examined, namely (a) use of European funds to sponsor concrete border-region collaboration projects, (b) use of European funds to sponsor research which gives visibility to cross-border collaboration, and (c) use of the European Commission's newly acquired legal mandate to encourage "Member States to cooperate in cross-border health care provision in border-regions" (Art. 10) and support "Member States in the development of European reference networks between health care providers and centres of expertise" (Art. 12). Second, evidence gathered in 2011-2013 from seven European border-regions on hospital cross-border collaboration is systematically reviewed to assess the reality of cross-border collaboration - can it work and when, and why do actors engage in cross-border collaboration? The preliminary findings suggest that while the EU plays a prominent role in some border-region initiatives, cross-border collaboration needs such a specific set of circumstances to work that it is questionable whether it can effectively be promoted. Moreover, local actors make use of the EU (as a source of funding, legislation or legitimisation) to serve their needs. PMID:25496663

  4. Is tuberculosis crossing borders at the Eastern boundary of the European Union?

    PubMed Central

    van der Werf, Marieke J.; Hollo, Vahur; Noori, Teymur

    2013-01-01

    Background: The Eastern border of the European Union (EU) consists of 10 countries after the expansion of the EU in 2004 and 2007. These 10 countries border to the East to countries with high tuberculosis (TB) notification rates. We analyzed the notification data of Europe to quantify the impact of cross-border TB at the Eastern border of the EU. Methods: We used TB surveillance data of 2010 submitted by 53 European Region countries to the European Centre for Disease Prevention and Control and the World Health Organization Regional Office for Europe. Notified TB cases were stratified by origin of the case (national/foreign). We calculated the contribution of foreign to overall TB notification. Results: In the 10 EU countries located at the EU Eastern border, 618 notified TB cases (1.7% of all notified TB cases) were of foreign origin. Of those 618 TB cases, 173 (28.0%) were from countries bordering the EU to the East. More specifically, 90 (52.0%) were from Russia, 33 (19.1%) from Belarus, 33 (19.1%) from Ukraine, 13 (7.5%) from Moldova and 4 (2.3%) from Turkey. Conclusions: Currently, migrants contribute little to TB notifications in the 10 EU countries at the Eastern border of the EU, but changes in migration patterns may result in an increasing contribution. Therefore, EU countries at the Eastern border of the EU should strive to provide prompt diagnostic services and adequate treatment of migrants. PMID:23813718

  5. Cross-border healthcare directive: Assessing stakeholders' perspectives in Poland and Portugal.

    PubMed

    Helena, Ricardo

    2016-04-01

    Within the context of the EU, a succession of rulings from the European Court of Justice addressed the gap of specific healthcare legislation. These rulings shook the member states assumption of health provision autonomy and led the European Commission to produce a specific directive concerning cross-border healthcare. In spite of different viewpoints of member states, including Poland and Portugal, the directive was approved and expected to be implemented by October 2013. The objective of this study was to analyse stakeholders' perspective towards the directive, unveiling the factors that supported a different viewpoint, and to identify challenges and assess the expected impact associated with the directive implementation on Poland and Portugal, using the WHO health systems conceptual framework. Information was collected through a literature review, identifying potential stakeholders. Primary qualitative analysis was conducted through the dissemination of open-ended questionnaires. Content and critical analysis was performed considering the available literature intertwined with the WHO health systems conceptual framework. The directive appears to be positive regarding patient rights, increased transparency, and potential to set new information technologies and healthcare networks. However, it also seems to potentially generate access inequalities between home and foreign patients, and increase healthcare costs due to the short-term investments needed. PMID:26948704

  6. Regional incentives and patient cross-border mobility: evidence from the Italian experience

    PubMed Central

    Brenna, Elenka; Spandonaro, Federico

    2015-01-01

    Background: In recent years, accreditation of private hospitals followed by decentralisation of the Italian National Health Service (NHS) into 21 regional health systems has provided a good empirical ground for investigating the Tiebout principle of "voting with their feet". We examine the infra-regional trade-off between greater patient choice (due to an increase in hospital services supply) and financial equilibrium, and we relate it to the significant phenomenon of Cross-Border Mobility (CBM) between Italian regions. Focusing on the rules supervising the financial agreements between regional authorities and providers of hospital care, we find incentives for private accredited providers in attracting patient inflows. Methods: The analysis is undertaken from an institutional, regulatory and empirical perspective. We select a sample of five regions with higher positive CBM balance and we examine regional regulations governing the contractual agreements between purchasers and providers of hospital care. According to this sample, we provide a statistical analysis of CBM and apply a Regional Attraction Ability Index (RAAI), aimed at testing patient preferences for private/public accredited providers. Results: We find that this index is systematically higher for private providers, both in the case of distance/boundary patients and of excellence/general hospitals. Conclusion: Conclusions address both financial issues regarding the coverage of regional healthcare systems and equity issues on patient healthcare access. They also raise concerns on the new European Union (EU) directive inherent to patient mobility across Europe. PMID:26029895

  7. Cross-border issues in the development of medical tourism in Malaysia: legal challenges and opportunities.

    PubMed

    Nemie, Puteri; Kassim, Jahn

    2009-08-01

    Strategically located at the crossroads of Asia, Malaysia has become one of the key players in the fast-growing and lucrative market for health care services in Asia. Medical travel across international boundaries has been made possible through affordable airfares and the favourable exchange rates of the Malaysian ringgit has contributed to the rise of the "medical tourism phenomenon" where medical travel is combined with visiting popular tourist destinations in Malaysia. Further, competitive medical fees and modern medical facilities have also made Malaysia a popular destination for medical tourists. Nevertheless, the increased number of foreign patients has opened up possibilities of Malaysian health care providers being subjected to malpractice claims and triggering a myriad of cross-border legal issues. Presently, there is no internationally accepted legal framework to regulate medical tourism and issues of legal redress in relation to unsatisfactory provision of treatment across international boundaries. The economic benefits of medical tourism must be based upon a solid legal regulatory framework and strong ethical standards as well as upon high-quality medical and health care services. It is therefore important to assess the existing legal framework affecting the development of medical tourism in Malaysia in order to explore the gaps, deficiencies and possibilities for legal and regulatory reform. PMID:19771987

  8. The role of basic data registers in cross-border interconnection of eHealth solutions.

    PubMed

    Kregar, Mirjana; Marčun, Tomaž; Dovžan, Irma; Cehovin, Lojzka

    2011-01-01

    The increasingly closer international business cooperation in the areas of production, trade, transport and activities such as tourism and education is promoting the mobility of people. This increases the need for the provision of health care services across borders. In order to provide increasingly safer and effective treatment that is of ever higher quality in these cases as well, it is necessary to ensure that data accompanies patients even when they travel to other regions, countries or continents. eHealth solutions are one of the key tools for achieving such objectives. When building these solutions, it is necessary to take into account the different aspects and limitations brought about by the differences in the environments where such a treatment of a patient takes place. In the debates on the various types of cross-border interoperability of eHealth solutions, it is necessary to bring to attention the necessity of suitable management and interconnection of data registers that form the basis of every information system: data on patients, health care service providers and basic code tables. It is necessary to promote well-arranged and quality data in the patient's domestic environment and the best possible options for transferring and using those data in the foreign environment where the patient is receiving medical care at a particular moment. Many of the discussions dealing with conditions for the interoperability of health care information systems actually start with questions of how to ensure the interconnectivity of basic data registers. PMID:21685602

  9. Cross-border impacts of the restriction of hazardous substances: a perspective based on Japanese solders.

    PubMed

    Fuse, Masaaki; Tsunemi, Kiyotaka

    2013-08-20

    Despite the relevance of the global economy, Regulatory Impact Assessments of the restriction of hazardous substances (RoHS) in the European Union (EU) are based only on domestic impacts. This paper explores the cross-border environmental impacts of the RoHS by focusing on the shifts to lead-free solders in Japan, which exports many electronics to the EU. The regulatory impacts are quantified by integrating a material flow analysis for metals constituting a solder with a scenario analysis with and without the RoHS. The results indicate that the EU regulation, the RoHS, has triggered shifts in Japan to lead-free solders, not only for electronics subject to this regulation, but for other products as well. We also find that the RoHS leads to a slow reduction in environmental emissions of the target, lead, but results in a rapid increase in the use of tin and silver in lead-free solders. This indicates the importance of assessing potential alternative substances, the use of which may increase as a result of adhering to the RoHS. The latter constitutes a negative impact because of recent concerns regarding resource criticality. PMID:23875815

  10. Cross-border mobility of health professionals: contesting patients' right to health.

    PubMed

    Plotnikova, Evgeniya Vadimovna

    2012-01-01

    Cross-border labour mobility in the health sector is portrayed as both an opportunity for health professionals immigrating to developed countries, and as a challenge for patients remaining in low-income countries with restricted access to health care provision. In policy debate, this problem is articulated as the opposition between, 'the right to freedom of movement' and 'the right to health'. The underlying layers of this dilemma expose competing institutional interests for source and destination countries, international organisations, private recruitment agencies, trade unions and professional organisations. To resolve some of these tensions, a 'soft law' regulation (ethical recruitment policy) was adopted in the UK in the early 2000s. This article argues that this ethical recruitment policy produces an ambivalent effect. The qualitative content analysis refers to documents produced by international organisations, government bodies, professional organisations and trade unions in the UK and source countries. We found that ethical recruitment on the one hand proposes a practical mechanism to the realisation of the right to health in source countries, through encouraging employers' behaviour in accordance with ethical principles in international recruitment. On the other hand, this policy protects the reputation of institutional stakeholders changing rhetoric around international recruitment rather than the practice. The findings of this study contribute to a broader discussion of the international norms diffusion and the ambivalent role of 'soft law' in their implementation. PMID:21435766

  11. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2009-07-01

    ... 40 Protection of Environment 28 2009-07-01 2009-07-01 false Additional measures. 412.37 Section 412.37 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Dairy Cows and Cattle Other Than Veal Calves § 412.37 Additional...

  12. Cross-border drug injection relationships among injection drug users in Tijuana, Mexico

    PubMed Central

    Wagner, Karla D.; Pollini, Robin A.; Patterson, Thomas L.; Lozada, Remedios; Ojeda, Victoria D.; Brouwer, Kimberly C.; Vera, Alicia; Volkmann, Tyson A.; Strathdee, Steffanie A.

    2010-01-01

    Background International borders are unique social and environmental contexts characterized by high levels of mobility. Among drug users, mobility increases risk for human immunodeficiency virus (HIV) in part through its effects on the social environment. However, the social dynamics of drug users living in border regions are understudied. Methods 1056 injection drug users (IDUs) residing in Tijuana, Mexico were recruited using respondent-driven sampling (RDS) from 2006 to 2007, and underwent surveys and testing for HIV, syphilis, and tuberculosis (TB). Using logistic regression on baseline data, we identified correlates of having ever injected drugs with someone from the US. Results Almost half (48%) reported ever injecting drugs with someone from the US. In RDS-adjusted logistic regression, factors independently associated with having ever injected with someone from the US included: having greater than middle school education (Adjusted Odds Ratio [AOR] 2.91; 95% Confidence Interval [C.I.] 1.52, 5.91), speaking English (AOR 3.24, 95% C.I. 1.96, 5.36), age (AOR 1.10 per year; 95% C.I. 1.07, 1.14), age at initiation of injection drug use (AOR 0.90 per year; 95% C.I. 0.86, 0.94), homelessness (AOR 2.61; 95% C.I. 1.27, 5.39), and having ever been incarcerated (AOR 11.82; 95% C.I., 5.22, 26.77). No associations with HIV, syphilis, TB, drug use, or injection risk behavior were detected. Conclusion Findings suggest that IDU networks in Mexico and the US may transcend international borders, with implications for cross-border transmission of infectious disease. Binational programs and policies need to consider the structure and geographic distribution of drug using networks. PMID:20889270

  13. Do Historical Landscape Patterns Help Explain Persistent Groundwater Nitrate Concentrations in a Cross-Border Aquifer?

    NASA Astrophysics Data System (ADS)

    Gallagher, T.; Gergel, S. E.

    2014-12-01

    The effects of agricultural production on nitrate contamination of groundwater is a pressing global concern and agricultural best management practices (BMPs) are often implemented as a means to help alleviate this problem. In Western North America, the Abbotsford-Sumas Aquifer spans the US-Canada border and provides drinking water for over 100,000 people. Intensive agriculture combined with high precipitation and well-drained soils make this aquifer susceptible to nitrate contamination. Long-term studies indicate elevated nitrate concentrations may be influenced by overlying land use; thus, in recent decades, various agricultural BMPs and stewardship programs have been implemented in the region to help reduce potential nitrate sources to the aquifer. Despite these improved nutrient management practices, nitrate concentrations have remained relatively high. To explore how time lags associated with surface inputs might explain this pattern, we ask two questions: (1) How have agricultural landscape patterns changed historically? (2) Do historical agricultural patterns explain continued elevated nitrate concentrations? Responses of nitrate concentrations in deep wells (with screens > 15 m below the water table) were contrasted with shallow wells (screens < 15 m) in the US and Canada. A seamless cross-border mosaic of land cover was created by harmonizing a variety of US and Canadian land use and land cover data. Surrounding each well, terrestrial zones of influence (aligned with the directional flow of groundwater) were delineated then historical and contemporary landscape patterns were characterized within these zones. To link landscape patterns with nitrate, multiple regression was used to compare the strength of relationships between historical land uses and mean nitrate concentrations from both deep and shallow wells. Because previous research showed that contemporary land cover was significantly correlated with shallow well nitrate concentrations, we hypothesize

  14. Welcome to the wild west: protecting access to cross border fertility care in the United States.

    PubMed

    Mutcherson, Kimberley M

    2012-01-01

    As has been the case with other types of medical tourism, the phenomenon of cross border fertility care ("CBFC") has sparked concern about the lack of global or even national harmonization in the regulation of the fertility industry. The diversity of laws around the globe leads would-be parents to forum shop for a welcoming place to make babies. Focusing specifically on the phenomenon of travel to the United States, this Article takes up the question of whether there should be any legal barriers to those who come to the United States seeking CBFC. In part, CBFC suffers from the same general concerns raised about the use of fertility treatment in general, but it is possible to imagine a subset of arguments that would lead to forbidding or at least discouraging people from coming to the United States for CBFC, either as a matter of law or policy. This paper stands in opposition to any such effort and contemplates the moral and ethical concerns about CBFC and how, and if, those concerns warrant expression in law. Part I describes the conditions that lead some couples and individuals to leave their home countries to access fertility treatments abroad and details why the United States, with its comparatively liberal regulation of ART, has become a popular CBFC destination for travelers from around the world. Part II offers and refutes arguments supporting greater domestic control over those who seek to satisfy their desires for CBFC in the United States by reasserting the importance of the right of procreation while also noting appropriate concerns about justice and equality in the market for babies. Part III continues the exploration of justice by investigating the question of international cooperation in legislating against perceived wrongs. This Part concludes that consistent legislation across borders is appropriate where there is consensus about the wrong of an act, but it is unnecessary and inappropriate where there remain cultural conflicts about certain

  15. Towards Cross-Border Landslide Hazard and Risk Assessment in Central Asia

    NASA Astrophysics Data System (ADS)

    Saponaro, A.; Pilz, M.; Wieland, M.; Pittore, M.; Bindi, D.; Parolai, S.

    2014-12-01

    The countries of Central Asia are known to be among the most exposed in the world to landslide hazard and risk. In the past, several devastating slope failures have caused intense economic and human losses across the entire region. The large variability of local geological materials, difficulties in forecasting heavy precipitation locally, and problems in quantifying the level of ground shaking, call for harmonized procedures to better quantify landslide hazard. Moreover, due to uncontrolled urban expansion in mountainous areas, a growth in vulnerability of exposed population as well as overall risk has to be expected. In order to mitigate landslide risk, novel and strategic approaches are required mainly for enhanced understanding of causal factors, for reducing exposure to hazards, and for controlling land-use practices in a harmonized transnational way. We have already presented a regional landslide susceptibility assessment for Kyrgyzstan. First results allow for the identification of most potential landslide areas all over the country, with sufficient degree of accuracy. Based on this, we hereby propose a procedure for obtaining cross-border risk map of earthquake-induced landslides among central Asian countries, by employing statistical tools and updated input information in such remote and data-scarce regions. The method is initially applied to Kyrgyzstan where the majority of input parameters is available, and subsequently extended to Tajikistan and Uzbekistan. At first, the influence of diverse potential parameters (topography, geology, tectonic lineaments) as well as seismic triggering to landslide activation is evaluated. Elements at risk are then analyzed in relation to landslide hazard, and their vulnerability is hence established. A sensitivity analysis is carried out, and results are validated to an independent dataset.

  16. Building the Tower of Babel: cross-border urgent medical assistance in Belgium, Germany and The Netherlands.

    PubMed

    Post, G B

    2004-01-01

    The border area between Germany, Belgium, and The Netherlands includes a substantial number of cooperative forms in the urgent medical assistance sector. Collaboration usually takes place in densely populated areas with cities or villages situated on or in proximity to the border. In some regions, definitive borders are not apparent to the extent that inhabitants often times are unaware of their existence. The border may pass directly through a built-up area with intense cross-border activity due to population residency, place of work, shopping, and recreational pursuits. To obtain a deeper insight into cross-border Urgent Medical Assistance (UMA), the Ministry of the Interior and Kingdom Relations (IKR) and the Ministry for Health, Welfare, and Sports (HWS) in The Netherlands commissioned research into cross-border UMA impediments and solutions at administrative, judicial, and operational level. The following central questions were presented for research: (1) What opportunities and impediments are presented in the area of cross-border, urgent medical assistance at administrative, legal, operational, and equipment employable level?; and (2) Which solutions may be submitted to tackle existing impediments? Two techniques were employed to answer the research questions. First, relevant documents were studied from extensive file and literature searches. File and literature search findings subsequently were tested in practice through interviews with relevant experts. Dutch ambulance services provide support to both their Belgian and German counterparts and vice versa. In the instance of cross-border ambulance deployment, relevant assistance services are subject to due observance of various legislations and regulations. Such regulations may restrict effective and efficient deployment of personnel and equipment at critical moments, because regulation discrepancies may arise over ambulance personnel's authorities, ambulance content, and deployment sequence. Discrepencies

  17. Quantifying cross-border movements and migrations for guiding the strategic planning of malaria control and elimination

    PubMed Central

    2014-01-01

    Background Identifying human and malaria parasite movements is important for control planning across all transmission intensities. Imported infections can reintroduce infections into areas previously free of infection, maintain ‘hotspots’ of transmission and import drug resistant strains, challenging national control programmes at a variety of temporal and spatial scales. Recent analyses based on mobile phone usage data have provided valuable insights into population and likely parasite movements within countries, but these data are restricted to sub-national analyses, leaving important cross-border movements neglected. Methods National census data were used to analyse and model cross-border migration and movement, using East Africa as an example. ‘Hotspots’ of origin-specific immigrants from neighbouring countries were identified for Kenya, Tanzania and Uganda. Populations of origin-specific migrants were compared to distance from origin country borders and population size at destination, and regression models were developed to quantify and compare differences in migration patterns. Migration data were then combined with existing spatially-referenced malaria data to compare the relative propensity for cross-border malaria movement in the region. Results The spatial patterns and processes for immigration were different between each origin and destination country pair. Hotspots of immigration, for example, were concentrated close to origin country borders for most immigrants to Tanzania, but for Kenya, a similar pattern was only seen for Tanzanian and Ugandan immigrants. Regression model fits also differed between specific migrant groups, with some migration patterns more dependent on population size at destination and distance travelled than others. With these differences between immigration patterns and processes, and heterogeneous transmission risk in East Africa and the surrounding region, propensities to import malaria infections also likely show

  18. Joint malaria surveys lead towards improved cross-border cooperation between Savannakhet province, Laos and Quang Tri province, Vietnam

    PubMed Central

    2012-01-01

    focal indoor residual spraying and the promotion of insect repellent use in the early evening as additional vector interventions. Conducting joint malaria surveys by staff of two countries proved to be effective in stimulating better collaboration and improve cross-border malaria control. PMID:22862795

  19. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Additional measures. 412.47 Section 412.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and...

  20. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Additional measures. 412.47 Section 412.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and...

  1. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Additional measures. 412.47 Section 412.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and...

  2. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 30 2012-07-01 2012-07-01 false Additional measures. 412.47 Section 412.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and...

  3. 40 CFR 412.47 - Additional measures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Additional measures. 412.47 Section 412.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Swine, Poultry, and...

  4. Surface texture measurement for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

    2015-06-01

    The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

  5. Cross-border reproductive care among French patients: experiences in Greece, Spain and Belgium

    PubMed Central

    Rozée Gomez, Virginie; de La Rochebrochard, Elise

    2013-01-01

    STUDY QUESTION What are the characteristics, motivation and experience of French patients seeking cross-border reproductive care (CBRC)? SUMMARY ANSWER French patients seeking CBRC are same-sex couples, single women who are not eligible for assisted reproduction technologies (ARTs) in France and heterosexual couples seeking oocyte donation due to extremely limited access to this technique in France, while their choice of Greece as a destination is influenced by financial issues. WHAT IS KNOWN ALREADY CBRC is a new, increasing, complex and poorly understood phenomenon. A few studies have investigated UK, German or Italian CBRC patients, but none have specifically investigated French patients although France is one of the top four countries of origin of CBRC patients in Europe. STUDY DESIGN, SIZE, DURATION A cross-sectional study was carried out in 2010–2012 in three ART centres in Greece, Belgium and Spain in order to investigate French patients treated in these centres. Recruitment was prospective in Greece and Belgium and retrospective in Spain. The overall response rate was 68%, with 128 French patients participating. PARTICIPANTS/MATERIALS, SETTING, METHODS French patients filled in a questionnaire. Information was collected on their socio-economic characteristics and their search for ART treatment in France and in other countries. MAIN RESULTS AND THE ROLE OF CHANCE In the Belgian centre, 89% of French patients used sperm donation whereas oocyte donation was used by 100% of patients in the Greek centre and 74% of patients in the Spanish centre. The majority (94%) of French patients using sperm donation in Belgium were not legally eligible for access to ART in France as they were same-sex couples or single women, and the main criterion of choice of centre was its geographical proximity (71%). Most of the French patients using oocyte donation in Greece and Spain fulfilled criteria for fully reimbursed oocyte donation treatment in France as they were

  6. A Binational Model of Collaboration for Enhancing Cross-border ID Surveillance

    PubMed Central

    Ortwine, Kristine; Ferran, Karen; Iniguez-Stevens, Esmeralda

    2013-01-01

    Objective The purpose of this demonstration is to describe the cross-border collaborative processes used for the development of a transparent methodology to identify and prioritize zoonotic infectious disease agents in the California-Baja California border region. Introduction International borders present unique challenges for the surveillance of infectious disease. Border communities represent locations with vast differences in cultures and languages, governing institutions, healthcare access, and priorities for the collection and surveillance of disease data. Pathogens and the health and security risks they create do not respect geographical and political boundaries. However, the organizations responsible for the surveillance and control of these agents must function within the borders of their respective governments. One Border One Health (OBOH) is a binational, multidisciplinary initiative aimed at engaging partners in the US and Mexico to identify and implement methods for successful communication and collaboration to enhance health capacity and disease surveillance within the border region. The advancements of international initiatives such as OBOH will help to develop the types of multi-country networks necessary for the effective monitoring of disease patterns and risks. Methods One Border One Health Surveillance Committee participants represent multi-disciplinary professionals working together for the advancement of One Health principles in the California/Baja California border region. This showcase documents the identification and prioritization of zoonotic infectious disease agents along the US-Mexico border, by use of a transparent methodology which engaged public and private partners from both countries. Preliminary research and input from collaborators in government, academic, and private sectors in the US and Mexico allowed for review and discussion of current methodologies available for prioritizing infectious agents. The DISCONTOOLS Work Package 2

  7. Is It More Important to Address the Issue of Patient Mobility or to Guarantee Universal Health Coverage in Europe?: Comment on "Regional Incentives and Patient Cross-Border Mobility: Evidence From the Italian Experience".

    PubMed

    Legido-Quigley, Helena

    2016-01-01

    This paper discusses whether European institutions should devote so much attention and funding to cross-border healthcare or they should instead prioritise guaranteeing universal health coverage (UHC), "addressing inequalities" and tackling the effects of austerity measures. The paper argues through providing the evidence in both areas of research, that the priority at European level from a public health and social justice perspective should be to guarantee UHC for all the population living in Europe and prioritise protective action for those who are most in need. PMID:26673649

  8. Egg Production and Donation: A New Frontier in the Global Landscape of Cross-Border Reproductive Care: Ethical Concerns.

    PubMed

    Neri, Margherita; Turillazzi, Emanuela; Pascale, Natasha; Riezzo, Irene; Pomara, Cristoforo

    2016-01-01

    Cross-border reproductive care (CBRC) is a multifaceted phenomenon. It may involve both the movement of patients to undertake assisted reproductive treatment through technologies otherwise denied and the movement of assisted reproduction professionals, egg and sperm donors and surrogates, as well as the importing and exporting of gametes. The reasons for CBRC vary between countries. In this global landscape, the search for donor oocytes is one of the main reasons for patients seeking cross-border reproductive care. The egg market has led to ethical and political concerns about the means of procuring donor oocytes, the possibility of exploiting economically underprivileged women mainly in poor countries, and the issue of the responsibility and accountability of medical doctors and fertility clinics. Ethical concerns relating to international egg donation are discussed with special focus on the issues of compensation/ reimbursement, the health and welfare of women donating eggs, informed consent to donation, the possible conflict of interest for physicians involved in egg donation programmes, and equity in the distribution of economic resources from CBRC. Finally, the need for global solutions to this global issue is underlined. PMID:26775650

  9. Extraterritoriality for cross-border reproductive care: should states act against citizens travelling abroad for illegal infertility treatment?

    PubMed

    Van Hoof, Wannes; Pennings, Guido

    2011-11-01

    Since the development of assisted reproduction technologies, there has been discussion on which people should have access to these technologies and which treatments and techniques are morally acceptable. However, national legislation can no longer determine what citizens do. Some countries react to their citizens going abroad to evade restrictions by implementing even more restrictive laws. Turkey has recently become the first state to ban reproductive travel in pursuit of donor gametes. Several states in Australia have enacted or are considering laws that prohibit international commercial surrogacy. This article investigates the consistency and morality of several state reactions to cross-border reproductive care (CBRC), including extraterritorial regulation. The only widespread existing extraterritorial regulation of private life concerns female genital cutting (FGC), sex with children and (largely in the past) abortion. This discussion develops an analogy with these cross-border crimes to evaluate the morality of similar legislation in cases of CBRC. The dissimilarity in these analogies shows that extraterritoriality is a radical position that is generally inappropriate in the case of CBRC. Subsequently, several potential state reactions to CBRC for law evasion are considered. It is concluded that legislation of CBRC should be modest, tolerant and nuanced. PMID:21955486

  10. 'The bloke can be a bit hazy about what's going on': men and cross-border reproductive treatment.

    PubMed

    Hudson, Nicky; Culley, Lorraine

    2013-09-01

    While social science research has begun to demonstrate the significant impact of infertility and involuntary childlessness for men, far fewer studies have specifically explored the male experience of, or men's involvement in, infertility treatment-seeking and there are few published studies which specifically describe men's experiences with cross-border reproduction. This paper presents data from the first UK study of transnational treatment-seeking and specifically explores men's involvement in this process. Data from interviews with 10 men and 34 women who were seeking treatment abroad are organized according to three themes: 'going along with it'; 'being a rock'; and 'doing their bit'. The paper argues that gender is an important aspect of the cross-border treatment experience and that both traditional and emergent gender identities are expressed in the process of treatment-seeking. Healthcare providers need to actively explore men's perspectives of the treatment process in all locations, to improve quality of care by reducing men's feelings of marginalization and enhancing their experience of treatment, especially but not exclusively, around the issue of semen collection. PMID:23890934

  11. Implementation of a near-real time cross-border web-mapping platform on airborne particulate matter (PM) concentration with open-source software

    NASA Astrophysics Data System (ADS)

    Knörchen, Achim; Ketzler, Gunnar; Schneider, Christoph

    2015-01-01

    Although Europe has been growing together for the past decades, cross-border information platforms on environmental issues are still scarce. With regard to the establishment of a web-mapping tool on airborne particulate matter (PM) concentration for the Euregio Meuse-Rhine located in the border region of Belgium, Germany and the Netherlands, this article describes the research on methodical and technical backgrounds implementing such a platform. An open-source solution was selected for presenting the data in a Web GIS (OpenLayers/GeoExt; both JavaScript-based), applying other free tools for data handling (Python), data management (PostgreSQL), geo-statistical modelling (Octave), geoprocessing (GRASS GIS/GDAL) and web mapping (MapServer). The multilingual, made-to-order online platform provides access to near-real time data on PM concentration as well as additional background information. In an open data section, commented configuration files for the Web GIS client are being made available for download. Furthermore, all geodata generated by the project is being published under public domain and can be retrieved in various formats or integrated into Desktop GIS as Web Map Services (WMS).

  12. Towards a cross-border hydrogeological model: harmonized data integration within the H3O-projects

    NASA Astrophysics Data System (ADS)

    Heyvaert, Vanessa M. A.; Vernes, Ronald W.; Deckers, Jef; Bogemans, Frieda; Deceukelaire, Marleen; Den Dulk, Maryke; Doornenbal, Hans C.; Dusar, Michiel; Hummelman, Jan; Kiden, Patrick; Lanckacker, Timothy; Menkovic, Armin; Meyvis, Bruno; Munsterman, Dirk K.; Reindersma, Reinder N.; ten Veen, Johan H.; van de Ven, Tamara J. M.; Walstra, Jan; Westerhoff, Wim E.; Witmans, Nora

    2016-04-01

    The sustainable use and management of natural resources in border regions requires unambiguous geological information from neighbouring countries. However, the available data often lack compatibility and the same level of detail across borders. Various stakeholders in the Netherlands and Flanders expressed their interest to harmonize the (hydro) geological models in the shared border region. Accordingly, the first H3O project was initiated in March 2012, focussing on the Roer Valley Graben across the Dutch-Flemish border. A second project (H3O-Campine area) set off in April 2015 and deals with the adjacent Campine area. Aim of these successive projects was (is) to produce cross-border, up-to-date, three-dimensional geological and hydrogeological models of the Cenozoic deposits. Existing (hydro) geological data (boreholes, well logs, seismic data, fault traces, geological maps and models) are collected, re-interpreted according to a harmonized lithostratigraphic scheme and fed into the 3D modelling process. Results of the first H3O-Roer Valley Graben project include: • A correlation scheme between Dutch and Belgian/Flemish (hydro) geological units; • A consistent fault model of the Roer Valley Graben; • Geometrically and stratigraphically consistent geological and hydrogeological models of the Cenozoic deposits in the Roer Valley Graben across the Dutch-Flemish border. The resulting 3D models can be considered as a state-of-the-art reference for the subsurface structure of the project area and can be used as a base for cross-border management of natural resources. The correlation scheme serves as a guideline for present (H3O-Campine area) and future cross-border projects. The H3O projects are carried out by a partnership between TNO - Geological Survey of the Netherlands, VITO and the Geological Survey of Belgium. The H3O models will be available in the public domain via the online data portals of DOV (Databank Ondergrond Vlaanderen) and DINOloket (Data en

  13. Cocaine profiling for strategic intelligence, a cross-border project between France and Switzerland: part II. Validation of the statistical methodology for the profiling of cocaine.

    PubMed

    Lociciro, S; Esseiva, P; Hayoz, P; Dujourdy, L; Besacier, F; Margot, P

    2008-05-20

    Harmonisation and optimization of analytical and statistical methodologies were carried out between two forensic laboratories (Lausanne, Switzerland and Lyon, France) in order to provide drug intelligence for cross-border cocaine seizures. Part I dealt with the optimization of the analytical method and its robustness. This second part investigates statistical methodologies that will provide reliable comparison of cocaine seizures analysed on two different gas chromatographs interfaced with a flame ionisation detectors (GC-FIDs) in two distinct laboratories. Sixty-six statistical combinations (ten data pre-treatments followed by six different distance measurements and correlation coefficients) were applied. One pre-treatment (N+S: area of each peak is divided by its standard deviation calculated from the whole data set) followed by the Cosine or Pearson correlation coefficients were found to be the best statistical compromise for optimal discrimination of linked and non-linked samples. The centralisation of the analyses in one single laboratory is not a required condition anymore to compare samples seized in different countries. This allows collaboration, but also, jurisdictional control over data. PMID:18272309

  14. The Right to Travel for Abortion Services: A Case Study in Irish 'Cross-border Reproductive Care'.

    PubMed

    Mulligan, Andrea

    2015-06-01

    Abortion is illegal in Ireland, except in very limited circumstances, but the Irish Constitution guarantees the right of women to travel abroad to obtain abortion services. Every year, large numbers of women travel to the UK to obtain abortions. This article argues that this can be regarded as an illustration of cross-border reproductive care (CBRC). CBRC is the phenomenon whereby people travel abroad to obtain assisted reproduction services that are illegal in their country of origin. A leading commentator, Guido Pennings, argues that CBRC is to be welcomed as a means by which society might compromise on issues of profound moral disagreement. Other commentators believe CBRC is highly problematic. This article argues that the Irish abortion example, when examined as an example of CBRC, illustrates both the advantages and disadvantages of CBRC identified by Pennings and his critics. PMID:26399045

  15. Establishing Trafficking in Human Beings for the Purpose of Organ Removal and Improving Cross-Border Collaboration in Criminal Cases: Recommendations.

    PubMed

    Holmes, Paul; Rijken, Conny; D'Orsi, Sergio; Esser, Luuk; Hol, Floor; Gallagher, Anne; Greenberg, Galit; Helberg, Louis; Horvatits, Lisa; McCarthy, Sean; Ratel, Jonathan; Scheper-Hughes, Nancy; Forsythe, John

    2016-02-01

    In this short summary report on the legal definition of trafficking in human beings for the purpose of organ removal and improving cross-border collaboration in criminal cases, challenges, and recommendations in the areas of defining the crime, criminal investigation and prosecution, and cross-border cooperation are made. These are the outcomes of a working group discussion during the writers' conference of the HOTT project, a European Union-funded project against trafficking in human beings for the purpose of organ removal. PMID:27500251

  16. Establishing Trafficking in Human Beings for the Purpose of Organ Removal and Improving Cross-Border Collaboration in Criminal Cases: Recommendations

    PubMed Central

    Holmes, Paul; Rijken, Conny; D'Orsi, Sergio; Esser, Luuk; Hol, Floor; Gallagher, Anne; Greenberg, Galit; Helberg, Louis; Horvatits, Lisa; McCarthy, Sean; Ratel, Jonathan; Scheper-Hughes, Nancy; Forsythe, John

    2016-01-01

    Abstract In this short summary report on the legal definition of trafficking in human beings for the purpose of organ removal and improving cross-border collaboration in criminal cases, challenges, and recommendations in the areas of defining the crime, criminal investigation and prosecution, and cross-border cooperation are made. These are the outcomes of a working group discussion during the writers' conference of the HOTT project, a European Union-funded project against trafficking in human beings for the purpose of organ removal. PMID:27500251

  17. Identifying Complex Cultural Interactions in the Instructional Design Process: A Case Study of a Cross-Border, Cross-Sector Training for Innovation Program

    ERIC Educational Resources Information Center

    Russell, L. Roxanne; Kinuthia, Wanjira L.; Lokey-Vega, Anissa; Tsang-Kosma, Winnie; Madathany, Reeny

    2013-01-01

    The purpose of this research is to identify complex cultural dynamics in the instructional design process of a cross-sector, cross-border training environment by applying Young's (2009) Culture-Based Model (CBM) as a theoretical framework and taxonomy for description of the instructional design process under the conditions of one case. This…

  18. Transcending Borders and Traversing Boundaries: A Systematic Review of the Literature on Transnational, Offshore, Cross-Border, and Borderless Higher Education

    ERIC Educational Resources Information Center

    Kosmützky, Anna; Putty, Rahul

    2016-01-01

    This article is a review of the literature concerned with transnational, offshore, cross-border, and borderless higher education, which together form a new thematic field within higher education research from the early 2000s onwards. The review places emphasis on the development of this field as well as its most cited contributions. The literature…

  19. New Era, New Policy: Cross-Border Education and Sino-Foreign Cooperation in Running Schools in the Eyes of a Fence-Sitter

    ERIC Educational Resources Information Center

    Minxuan, Zhang

    2009-01-01

    Since World War II, the internationalization of education has experienced a change from a period of political influence to a service trade structure. As the Third International Forum on the Educational Service Trade began, more and more governments accepted the concept of cross-border education. At a time when both opportunities and challenges lay…

  20. Cross-Border Flows of Students for Higher Education: Push-Pull Factors and Motivations of Mainland Chinese Students in Hong Kong and Macau

    ERIC Educational Resources Information Center

    Li, Mei; Bray, Mark

    2007-01-01

    Within the context of broad literature on cross-border flows for higher education, this article examines the distinctive case of mainland Chinese students in Hong Kong and Macau. These territories are a sort of bridge between the fully domestic and the fully international. Hong Kong and Macau higher education plays a dual role, as a destination in…

  1. Translation of the UNESCO/OECD Guidelines for Quality Provision in Cross-Border Higher Education into Local Policy Contexts: A Comparative Study of Finland and Russia

    ERIC Educational Resources Information Center

    Kallo, Johanna; Semchenko, Anzhelika

    2016-01-01

    This article analyses the localisation of the United Nations Educational Scientific and Cultural Organisation (UNESCO)/Organisation for Economic Co-operation and Development (OECD) "Guidelines for Quality Provision in Cross-Border Higher Education" (2005) at the national and university levels in Finland and Russia. The article engages…

  2. Research protocol: a realist synthesis of cross-border patient mobility from low-income and middle-income countries

    PubMed Central

    Durham, Jo; Blondell, Sarah J

    2014-01-01

    Introduction People are increasingly mobile for numerous reasons, including healthcare. Patient mobility has vast implications for individuals, communities and whole populations and yet, to date, research on patient mobility has been quite limited. Only a small body of evidence exists on patient mobility between low-income and middle-income countries, instead having focused primarily on cross-border movement between high-income and low-income countries. In this paper, we present a protocol for examining this under-studied phenomenon. Methods and analysis We propose to examine patient mobility between low-income and middle-income countries using a realist synthesis approach. Specifically, we aim to document why patients from low-income and middle-income countries cross international borders for healthcare, by identifying the mechanisms through which patients decide to cross-borders, and the contextual characteristics of domestic health markets that influence this choice. An underlying theory was established, based on the lead author's experience and a brief literature review, which will provide the basis to analyse search results in a subsequent paper. Search results will be obtained from databases (Ovid Medline, EMBASE, Scopus, EconLit, Web of Science) and the grey literature. An expert committee will be enlisted, prior to screening results, to review search results to ensure comprehensiveness. Based on this preliminary theory, we propose that, in some low-income and middle-income country markets, the interaction between demand-side and supply-side determinants results in market imperfections that, in turn, lead to patient movement across borders. Ethics and dissemination The study does not involve primary research and, therefore, does not require formal ethical approval; we do, however, follow the relevant standards of utility, usefulness, feasibility, propriety, accuracy and accountability. The standards of realist and meta-narrative evidence synthesis (RAMESES

  3. Cross-border movement and women's health: how to capture the data

    PubMed Central

    2011-01-01

    Introduction The movement of women across international borders is occurring at greater rates than ever before, yet the relationship between migration and women's health has been under-explored. One reason may be difficulty measuring migration variables including country of birth, length of time in country, immigration status, language ability, and ethnicity. A range of social, environmental, cultural, and medical characteristics associated with the pre-, during- and post-migration phases are also important to consider. The objective of this paper is to present challenges and solutions in measuring migration and related variables via survey-like questionnaires administered to international migrant women. Methods The development, validation, and translation of two questionnaires subsequently applied in studies of migrant women during pregnancy, birth and postpartum were used as case examples to highlight related measurement issues. Results Challenges: (1) Measuring socio-cultural, medical and environmental variables across the pre-during-post migration phases (since questions must be framed so that data relating to each phase of migration are captured); (2) Obtaining data for complex patterns of migration (i.e., multiple movements between multiple destinations); and (3) answering long questions across a time continuum. Solutions: (1) Using interviewer-assisted rather than self-administered questions; (2) Adding probes and explanations to 'walk' participants through their migration experiences; (3) Identifying variables (e.g., trafficking) better captured using non-questionnaire data collection methods or better not collected (e.g., ethnicity) due to extreme variations in meaning. Conclusion Carefully constructed and translated survey questionnaires are practical tools for the collection of a breadth of migrant data. These data, including detailed accounts of countries lived in, length of time in those countries, immigration status, change in status, language fluency

  4. Cross-Border Utilization of Health Care: Evidence from a Population-Based Study in South Texas

    PubMed Central

    Su, Dejun; Richardson, Chad; Wen, Ming; Pagán, José A

    2011-01-01

    Objective To assess the prevalence of health care utilization in Mexico by Texas border residents and to identify the main contributing factors to their cross-border utilization of health care services. Data and Methods This study used primary data from a population-based telephone survey that was conducted in the whole Texas border area in 2008. The survey included responses from 1,405 adults. Multivariate logistic regression models were estimated to determine predictors of utilizing a wide range of health care services in Mexico. Principal Findings Forty-nine percent of the sample reported having ever purchased medications in Mexico, followed by 41 percent for dentist visits, 37.3 percent for doctor visits, and 6.7 percent for inpatient care. The most significant predictors of health care utilization in Mexico were lack of U.S. health insurance coverage, dissatisfaction with the quality of U.S. health care, and poor self-rated health status. Conclusions The high prevalence of use of health care services in Mexico by Texas border residents is suggestive of unmet needs in health care on the U.S. side of the border. Addressing these unmet needs calls for a binational approach to improve the affordability, accessibility, and quality of health care in the U.S.–Mexico border region. PMID:21158855

  5. Crossing Borders to Advance the Frontier: NSF's Role in International Outreach

    NASA Astrophysics Data System (ADS)

    Bement, Arden

    2006-04-01

    The globalization of today's science and engineering is unprecedented. Ideas and discoveries emerge around the world and are transmitted instantaneously. Skills and capabilities are moving to new venues. We can view this free flow of investment and intellectual capital not only as a challenge, but also as an opportunity to form partnerships that integrate our strengths with those of other cultures and economies. As a nation, we can seek additional ways to become a valued partner in the global arena. We can train scientists and engineers that are not only technically competent but also skilled in cross-disciplinary, multi-cultural collaborations. NSF is committed to building bridges across borders to pursue these goals and collaboratively advance the frontiers of science and engineering.

  6. Linkages among climate change, crop yields and Mexico–US cross-border migration

    PubMed Central

    Feng, Shuaizhang; Krueger, Alan B.; Oppenheimer, Michael

    2010-01-01

    Climate change is expected to cause mass human migration, including immigration across international borders. This study quantitatively examines the linkages among variations in climate, agricultural yields, and people's migration responses by using an instrumental variables approach. Our method allows us to identify the relationship between crop yields and migration without explicitly controlling for all other confounding factors. Using state-level data from Mexico, we find a significant effect of climate-driven changes in crop yields on the rate of emigration to the United States. The estimated semielasticity of emigration with respect to crop yields is approximately −0.2, i.e., a 10% reduction in crop yields would lead an additional 2% of the population to emigrate. We then use the estimated semielasticity to explore the potential magnitude of future emigration. Depending on the warming scenarios used and adaptation levels assumed, with other factors held constant, by approximately the year 2080, climate change is estimated to induce 1.4 to 6.7 million adult Mexicans (or 2% to 10% of the current population aged 15–65 y) to emigrate as a result of declines in agricultural productivity alone. Although the results cannot be mechanically extrapolated to other areas and time periods, our findings are significant from a global perspective given that many regions, especially developing countries, are expected to experience significant declines in agricultural yields as a result of projected warming. PMID:20660749

  7. Limited cross-border infections in patients newly diagnosed with HIV in Europe

    PubMed Central

    2013-01-01

    Background International travel plays a role in the spread of HIV-1 across Europe. It is, however, not known whether international travel is more important for spread of the epidemic as compared to endogenous infections within single countries. In this study, phylogenetic associations among HIV of newly diagnosed patients were determined across Europe. Results Data came from the SPREAD programme which collects samples of newly diagnosed patients that are representative for national HIV epidemics. 4260 pol sequences from 25 European countries and Israel collected in 2002–2007 were included. We identified 457 clusters including 1330 persons (31.2% of all patients). The cluster size ranged between 2 and 28. A number of 987 patients (74.2%) were part of a cluster that consisted only of patients originating from the same country. In addition, 135 patients (10.2%) were in a cluster including only individuals from neighboring countries. Finally, 208 patients (15.6%) clustered with individuals from countries without a common border. Clustering with patients from the same country was less prevalent in patients being infected with B subtype (P-value <0.0001), in men who have sex with men (P-value <0.0001), and in recently infected patients (P-value =0.045). Conclusions Our findings indicate that the transmission of HIV-1 in Europe is predominantly occurring between patients from the same country. This could have implications for HIV-1 transmission prevention programmes. Because infections through travelling between countries is not frequently observed it is important to have good surveillance of the national HIV-1 epidemics. PMID:23551870

  8. Cross-border reproductive care for law evasion: a qualitative study into the experiences and moral perspectives of French women who go to Belgium for treatment with donor sperm.

    PubMed

    Van Hoof, Wannes; Pennings, Guido; De Sutter, Petra

    2015-01-01

    One consequence of the legal diversity in Europe is that legal restrictions on treatments can be evaded by going abroad. Many French lesbian couples and single women are crossing the border to Belgium because they are denied access to treatments with donor sperm at home. This is the first qualitative research study into the experiences and moral perspectives of these women. Between June 2012 and May 2013, 11 lesbian couples and 2 single women were recruited at the department of reproductive medicine at Ghent University Hospital. The data from the semi-structured interviews was analysed using inductive thematic analysis. The results show that these women face several additional challenges to the already difficult process of cross-border treatment. Before they can start the treatment, they can only obtain information from the internet or from stories of friends who also went abroad for treatment with donor sperm. During the treatment, they need to find local clinics or physicians to monitor their cycle. Several women managed to game the French system to ensure partial reimbursement for their treatment when they were successful in finding a physician who was willing to prescribe drugs and perform tests. Most women had difficulties justifying their absence from work. In general these women felt that they were discriminated against and that their rights were not protected because of who they are. In that regard, the lack of legal recognition of the genetically unrelated partner in their country was particularly hard to cope with for the lesbian couples. These women have to develop many different strategies to deal with the difficulties they face during cross-border reproductive care. It is concluded that it is very important that they find a physician who is willing to support them in their 'baby project'. PMID:25239009

  9. Cross-Border Policy Effects on Alcohol Outcomes: Drinking Without Thinking on the U.S.-Mexico Border?

    PubMed Central

    Mills, Britain A.; Caetano, Raul; Vaeth, Patrice

    2014-01-01

    Background Rates of alcohol-related outcomes are sensitive to policy differences in politically distinct, adjacent territories. Factors that shape these cross-border effects, particularly when the policy differences are longstanding, remain poorly understood. We compared the ability of two classes of variables with theoretical relevance to the U.S.-Mexico border context – bar attendance and alcohol-related social-cognitive variables – to explain elevated drinking on the U.S. side of the border relative to other areas of the U.S. Methods Data were collected from multi-stage cluster samples of adult Mexican Americans on and off the U.S.-Mexico Border (current drinker N=1351). Structural equation models were used to test drinking context (frequency of bar attendance) and six different social-cognitive variables (including alcohol-related attitudes, norms, motives, and beliefs) as mediators of border effects on a composite drinking index. Results The border effect on drinking varied by age (with younger adults showing a stronger effect), consistent with previous findings and known risk factors in the region. Contrary to theoretical expectations, six different social-cognitive variables – despite relating strongly with drinking – were comparable in border and non-border areas (within and across age) and played no role in elevated drinking on the border. Conversely, elevated drinking among border youth was mediated by bar attendance. This mediated moderation effect held after adjusting for potential sociodemographic and neighborhood-level confounders. Conclusions Increased drinking among U.S.-Mexico border youth is explained by patterns of bar attendance, but not by more permissive alcohol-related social-cognitive variables in border areas: Border youth attend bars and drink more than their non-border counterparts, despite having comparable alcohol-related beliefs, attitudes, norms, and motives for use. Alcohol's heightened availability and visibility on both

  10. Crossing borders for science.

    PubMed

    Schultheiss, Sebastian J; Yang, Joshua SungWoo; Iwasaki, Wataru; Lin, Shu-Hsi; Jean, Angela; Michaut, Magali

    2014-03-01

    Exchanging ideas with like-minded, enthusiastic people interested in the same topic is crucial for the advancement of a scientist's career. Several Regional Student Groups (RSGs) of the International Society for Computational Biology (ISCB) Student Council have cooperated in the last six years to organize scientific workshops and conferences. With motivated students, it is possible to create a memorable event for fellow scientists; in doing so, the organizers gain valuable experiences. While collaborating across borders and time zones can be difficult, feedback from event organizers was always positive. When limited resources are juxtaposed with great ideas and a network of contacts, the outcome is always an amazing experience, despite organizers being separated geographically across different countries. PMID:24675824

  11. Crossing Borders, Addressing Diversity

    ERIC Educational Resources Information Center

    Canagarajah, Suresh

    2016-01-01

    This paper presents a story of applied linguistics from my personal vantage point as a multilingual scholar whose career began outside the centers of research and scholarship. The article explains the assumptions and practices characterizing the foundation of the discipline in modernist discourses, and delineates the changes resulting from…

  12. Towards a Cross-domain Infrastructure to Support Electronic Identification and Capability Lookup for Cross-border ePrescription/Patient Summary Services.

    PubMed

    Katehakis, Dimitrios G; Masi, Massimiliano; Wisniewski, Francois; Bittins, Sören

    2016-01-01

    Seamless patient identification, as well as locating capabilities of remote services, are considered to be key enablers for large scale deployment of facilities to support the delivery of cross-border healthcare. This work highlights challenges investigated within the context of the Electronic Simple European Networked Services (e-SENS) large scale pilot (LSP) project, aiming to assist the deployment of cross-border, digital, public services through generic, re-usable technical components or Building Blocks (BBs). Through the case for the cross-border ePrescription/Patient Summary (eP/PS) service the paper demonstrates how experience coming from other domains, in regard to electronic identification (eID) and capability lookup, can be utilized in trying to raise technology readiness levels in disease diagnosis and treatment. The need for consolidating the existing outcomes of non-health specific BBs is examined, together with related issues that need to be resolved, for improving technical certainty and making it easier for citizens who travel to use innovative eHealth services, and potentially share personal health records (PHRs) with other providers abroad, in a regulated manner. PMID:27225571

  13. Understanding Rasch Measurement: The Rasch Model, Additive Conjoint Measurement, and New Models of Probabilistic Measurement Theory.

    ERIC Educational Resources Information Center

    Karabatsos, George

    2001-01-01

    Describes similarities and differences between additive conjoint measurement and the Rasch model, and formalizes some new nonparametric item response models that are, in a sense, probabilistic measurement theory models. Applies these new models to published and simulated data. (SLD)

  14. Cross-border sexual transmission of the newly emerging HIV-1 clade CRF51_01B.

    PubMed

    Cheong, Hui Ting; Ng, Kim Tien; Ong, Lai Yee; Chook, Jack Bee; Chan, Kok Gan; Takebe, Yutaka; Kamarulzaman, Adeeba; Tee, Kok Keng

    2014-01-01

    A novel HIV-1 recombinant clade (CRF51_01B) was recently identified among men who have sex with men (MSM) in Singapore. As cases of sexually transmitted HIV-1 infection increase concurrently in two socioeconomically intimate countries such as Malaysia and Singapore, cross transmission of HIV-1 between said countries is highly probable. In order to investigate the timeline for the emergence of HIV-1 CRF51_01B in Singapore and its possible introduction into Malaysia, 595 HIV-positive subjects recruited in Kuala Lumpur from 2008 to 2012 were screened. Phylogenetic relationship of 485 amplified polymerase gene sequences was determined through neighbour-joining method. Next, near-full length sequences were amplified for genomic sequences inferred to be CRF51_01B and subjected to further analysis implemented through Bayesian Markov chain Monte Carlo (MCMC) sampling and maximum likelihood methods. Based on the near full length genomes, two isolates formed a phylogenetic cluster with CRF51_01B sequences of Singapore origin, sharing identical recombination structure. Spatial and temporal information from Bayesian MCMC coalescent and maximum likelihood analysis of the protease, gp120 and gp41 genes suggest that Singapore is probably the country of origin of CRF51_01B (as early as in the mid-1990s) and featured a Malaysian who acquired the infection through heterosexual contact as host for its ancestral lineages. CRF51_01B then spread rapidly among the MSM in Singapore and Malaysia. Although the importation of CRF51_01B from Singapore to Malaysia is supported by coalescence analysis, the narrow timeframe of the transmission event indicates a closely linked epidemic. Discrepancies in the estimated divergence times suggest that CRF51_01B may have arisen through multiple recombination events from more than one parental lineage. We report the cross transmission of a novel CRF51_01B lineage between countries that involved different sexual risk groups. Understanding the cross-border

  15. Cross-Border Sexual Transmission of the Newly Emerging HIV-1 Clade CRF51_01B

    PubMed Central

    Cheong, Hui Ting; Ng, Kim Tien; Ong, Lai Yee; Chook, Jack Bee; Chan, Kok Gan; Takebe, Yutaka; Kamarulzaman, Adeeba; Tee, Kok Keng

    2014-01-01

    A novel HIV-1 recombinant clade (CRF51_01B) was recently identified among men who have sex with men (MSM) in Singapore. As cases of sexually transmitted HIV-1 infection increase concurrently in two socioeconomically intimate countries such as Malaysia and Singapore, cross transmission of HIV-1 between said countries is highly probable. In order to investigate the timeline for the emergence of HIV-1 CRF51_01B in Singapore and its possible introduction into Malaysia, 595 HIV-positive subjects recruited in Kuala Lumpur from 2008 to 2012 were screened. Phylogenetic relationship of 485 amplified polymerase gene sequences was determined through neighbour-joining method. Next, near-full length sequences were amplified for genomic sequences inferred to be CRF51_01B and subjected to further analysis implemented through Bayesian Markov chain Monte Carlo (MCMC) sampling and maximum likelihood methods. Based on the near full length genomes, two isolates formed a phylogenetic cluster with CRF51_01B sequences of Singapore origin, sharing identical recombination structure. Spatial and temporal information from Bayesian MCMC coalescent and maximum likelihood analysis of the protease, gp120 and gp41 genes suggest that Singapore is probably the country of origin of CRF51_01B (as early as in the mid-1990s) and featured a Malaysian who acquired the infection through heterosexual contact as host for its ancestral lineages. CRF51_01B then spread rapidly among the MSM in Singapore and Malaysia. Although the importation of CRF51_01B from Singapore to Malaysia is supported by coalescence analysis, the narrow timeframe of the transmission event indicates a closely linked epidemic. Discrepancies in the estimated divergence times suggest that CRF51_01B may have arisen through multiple recombination events from more than one parental lineage. We report the cross transmission of a novel CRF51_01B lineage between countries that involved different sexual risk groups. Understanding the cross-border

  16. Cross-border reproductive care for law evasion: should physicians be allowed to help infertility patients evade the law of their own country?

    PubMed

    Van Hoof, Wannes; Pennings, Guido; De Sutter, Petra

    2016-07-01

    There are fundamental differences between countries with regard to legislation on assisted reproduction. Many infertility patients are looking to evade the law of their own country and make use of reproductive services abroad. The role of the local physician in cross-border reproductive care for law evasion has been characterized as "channeling local patients to foreign medical establishments" and "against the spirit and essence of the law". The logical view is that by supporting CBRC for law evasion, physicians are essentially supporting immoral behavior. We will tackle this position on two levels. First, we will argue that governments should generally be tolerant toward people with different positions on assisted reproduction. Second, we will show that contributing to cross-border reproductive care for law evasion is not necessarily immoral, because the prima facie wrongness of complicity in law evasion can be outweighed by the fact that physicians should act in the best interest of the patient. Several countries have tried to prevent local physicians from helping patients to make use of reproductive services abroad, but they should rather leave it up to the individual physicians to decide whether or not to support a particular patient. PMID:26372639

  17. Cross-border collaboration for neglected tropical disease efforts-Lessons learned from onchocerciasis control and elimination in the Mano River Union (West Africa).

    PubMed

    Gustavsen, Kenneth; Sodahlon, Yao; Bush, Simon

    2016-01-01

    Diseases don't respect borders, so efforts to control and eliminate diseases must also be flexible and adaptable enough to effectively reach the populations that live in the areas around national frontiers. Onchocerciasis, commonly known as river blindness is a tropical disease that has historically affected millions of people in 35 countries in Africa and Latin America. In Africa, programs and partnerships to address river blindness through mass drug administration have been active for more than 25 years. While in many cases the disease is found in isolated foci that fall entirely within national boundaries, the geographic scope of many affected areas crosses country borders. National river blindness programs are the responsibility of each nation's Ministry of Health, so in cross-border situations there is a need for effective country-country collaboration. Cross-border collaboration for onchocerciasis control efforts in the countries of the Mano River Basin illustrates the positive impact of a creative model, and offers lessons for expanded application for onchocerciasis elimination as well as other neglected tropical disease (NTD) control and elimination programs. PMID:27549911

  18. Changes in rubber plantation in the cross-border area of mainland Southeast Asia through analysis of PALSAR and time series Landsat images

    NASA Astrophysics Data System (ADS)

    Dong, J.; Xiao, X.; Qin, Y.; Chen, B.; Kou, W.; Zhai, D.; Zhang, G.; Zhang, Y.; Zhou, Y.; Wang, J.

    2015-12-01

    With the increasing demand of natural rubber products in the world market, rubber plantations have dramatically expanded into northern areas of tropical and subtropical zones in Southeast Asia, which have been affecting ecosystem services and human wellbeing. In the cross-border area of five countries (China, Vietnam, Laos, Thailand, and Myanmar), the rubber plantation dynamics varied substantially due to the differences in socioeconomic conditions from local to national scales. However, no spatially explicit information available for this region due to very limited efforts in research and monitoring. Our previous studies have proposed a phenology- and multisensor-based approach to map rubber plantation according to its deciduous feature; however, it is still uncertain that whether the approach can be used for the cross-border area. In this study, we aim to assess the potential of the previous algorithm in the study area by integrating a base forest map from 25-m phase-array L-band synthetic aperture radar (PALSAR) orthorectified mosaic imagery and defoliation information from all the available 30-m Landsat archive imagery. Furthermore, we would compare the changes in the rubber plantation pattern in the five countries from 2007 to 2014. The rubber plantation dynamics in individual countries will be analyzed by considering policies and other factors in different countries. The study would provide valuable information for a broad scientific community (e.g., carbon cycle, biodiversity) and forest management departments.

  19. Additives

    NASA Technical Reports Server (NTRS)

    Smalheer, C. V.

    1973-01-01

    The chemistry of lubricant additives is discussed to show what the additives are chemically and what functions they perform in the lubrication of various kinds of equipment. Current theories regarding the mode of action of lubricant additives are presented. The additive groups discussed include the following: (1) detergents and dispersants, (2) corrosion inhibitors, (3) antioxidants, (4) viscosity index improvers, (5) pour point depressants, and (6) antifouling agents.

  20. Usefulness of additional measurements of the median nerve with ultrasonography.

    PubMed

    Claes, F; Meulstee, J; Claessen-Oude Luttikhuis, T T M; Huygen, P L M; Verhagen, W I M

    2010-12-01

    High resolution sonography is a relatively new diagnostic technique in diagnosing carpal tunnel syndrome (CTS). Normal values in different studies, however, vary and this makes their practical use difficult. The aim of this study was to establish normal values for the median nerve cross-sectional area (CSA) and to investigate the value of measuring additional parameters. Ninety-eight wrists of 29 women and 25 men without signs or symptoms of CTS were included. Width and circumference of the wrist were measured. The CSA of the median nerve at the level of the pisiform bone was measured using ultrasonography. We found a significant correlation between the CSA of the median nerve at the wrist and wrist circumference. Measuring wrist circumference will establish the upper level of normal more accurately compared to predictions solely based upon gender. This has important implications in diagnosing CTS with ultrasonography. PMID:20429021

  1. Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control

    PubMed Central

    Slotwinski, John A; Garboczi, Edward J; Hebenstreit, Keith M

    2014-01-01

    Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part’s porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented. PMID:26601041

  2. Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control.

    PubMed

    Slotwinski, John A; Garboczi, Edward J; Hebenstreit, Keith M

    2014-01-01

    Additive manufacturing techniques can produce complex, high-value metal parts, with potential applications as critical metal components such as those found in aerospace engines and as customized biomedical implants. Material porosity in these parts is undesirable for aerospace parts - since porosity could lead to premature failure - and desirable for some biomedical implants - since surface-breaking pores allows for better integration with biological tissue. Changes in a part's porosity during an additive manufacturing build may also be an indication of an undesired change in the build process. Here, we present efforts to develop an ultrasonic sensor for monitoring changes in the porosity in metal parts during fabrication on a metal powder bed fusion system. The development of well-characterized reference samples, measurements of the porosity of these samples with multiple techniques, and correlation of ultrasonic measurements with the degree of porosity are presented. A proposed sensor design, measurement strategy, and future experimental plans on a metal powder bed fusion system are also presented. PMID:26601041

  3. Modeling Errors in Daily Precipitation Measurements: Additive or Multiplicative?

    NASA Technical Reports Server (NTRS)

    Tian, Yudong; Huffman, George J.; Adler, Robert F.; Tang, Ling; Sapiano, Matthew; Maggioni, Viviana; Wu, Huan

    2013-01-01

    The definition and quantification of uncertainty depend on the error model used. For uncertainties in precipitation measurements, two types of error models have been widely adopted: the additive error model and the multiplicative error model. This leads to incompatible specifications of uncertainties and impedes intercomparison and application.In this letter, we assess the suitability of both models for satellite-based daily precipitation measurements in an effort to clarify the uncertainty representation. Three criteria were employed to evaluate the applicability of either model: (1) better separation of the systematic and random errors; (2) applicability to the large range of variability in daily precipitation; and (3) better predictive skills. It is found that the multiplicative error model is a much better choice under all three criteria. It extracted the systematic errors more cleanly, was more consistent with the large variability of precipitation measurements, and produced superior predictions of the error characteristics. The additive error model had several weaknesses, such as non constant variance resulting from systematic errors leaking into random errors, and the lack of prediction capability. Therefore, the multiplicative error model is a better choice.

  4. Comparison of the Partner Institutions' Perceptions of the Cross-Border Higher Education Program and the Impact on Program Implementation: Case Studies of Two Sino-U.S. Business Management Programs

    ERIC Educational Resources Information Center

    Jie, Yiyun

    2011-01-01

    This study examined discrepancies and similarities between the partner institutions' perceptions of the motivations, expected outcomes, and desired strategies achieving such outcomes in their cross-border higher educational programs from a game theory perspective, in the context of Mainland China (hereafter referred to as China). By comparing the…

  5. Patterns of HIV Prevalence and HIV Risk Behaviors among Injection Drug Users Prior to and 24 Months following Implementation of Cross-Border HIV Prevention Interventions in Northern Vietnam and Southern China

    ERIC Educational Resources Information Center

    Hammett, Theodore M.; Kling, Ryan; Johnston, Patrick; Liu, Wei; Ngu, Doan; Friedmann, Patricia; Binh, Kieu Thanh; Dong, Ha Viet; Van, Ly Kieu; Donghua, Meng; Chen, Yi; Des Jarlais, Don C.

    2006-01-01

    In 2002, we implemented a 4-year HIV prevention intervention for injection drug users (IDUs) in Lang Son Province, Vietnam, and Ning Ming County, Guangxi Province, China, a cross-border region seriously affected by inter-twined epidemics of heroin injection and HIV infection. The interventions involve peer education on HIV risk reduction and…

  6. Imported bancroftian filariasis: diethylcarbamazine response and benzimidazole susceptibility of Wuchereria bancrofti in dynamic cross-border migrant population targeted by the National Program to Eliminate Lymphatic Filariasis in South Thailand.

    PubMed

    Bhumiratana, A; Pechgit, P; Koyadun, S; Siriaut, C; Yongyuth, P

    2010-02-01

    The implementation on the Thailand-Myanmar border of annual mass drug administration (MDA) of a single 6 mg/kg dose of diethylcarbamazine (DEC) plus 400mg albendazole, part of the National Program to Eliminate Lymphatic Filariasis (PELF), has been challenging. In particular, chain migration of cross-border Myanmar workers at risk for nocturnally periodic Wuchereria bancrofti infection can lead to imported bancroftian filariasis (IBF) in Thailand. IBF is targeted for multiple-dose MDA with 300 mg DEC, in addition to what is recommended by the World Health Organization (WHO). The dynamic Myanmar migrants in Phang-nga, southern Thailand were sampled to test whether the responsible W. bancrofti has a genetic predisposition of benzimidazole exposure, and IBF exhibits DEC susceptibility. The long-term migrants had more access to DEC. IBF in W. bancrofti antigenemic (microfilaremic vs. amicrofilaremic) short-term migrants exhibited susceptibility to a 300-mg single-dose DEC treatment. During the course of a 3-month follow-up, antigenemia was significantly reduced, but microfilaremia was fluctuated. Surprisingly, a newly recognized Mansonella infection co-existing among W. bancrofti-affected Myanmar migrants elicited microfilaremia clearance within a month after treatment. As a result of the presence of genetically stable W. bancrofti beta-tubulin (Wbtubb) gene responsible for benzimidazole susceptibility, IBF did not possess a genetic predisposition for benzimidazole exposure. Point mutations at positions Phe167Tyr and Phe200Tyr were not detected by Wbtubb locus-specific nested PCR and sequencing. This study has the potential to help guide not only the Thai/Myanmar PELF surveillance and monitoring of mass treatment impacts on W. bancrofti, but also the other endemic countries allied with the Global Program to Eliminate Lymphatic Filariasis (GPELF). PMID:19835831

  7. Cleaning and Cleanliness Measurement of Additive Manufactured Parts

    NASA Technical Reports Server (NTRS)

    Welker, Roger W.; Mitchell, Mark A.

    2015-01-01

    The successful acquisition and utilization of piece parts and assemblies for contamination sensitive applications requires application of cleanliness acceptance criteria. Contamination can be classified using many different schemes. One common scheme is classification as organic, ionic and particulate contaminants. These may be present in and on the surface of solid components and assemblies or may be dispersed in various gaseous or liquid media. This discussion will focus on insoluble particle contamination on the surface of piece parts and assemblies. Cleanliness of parts can be controlled using two strategies, referred to as gross cleanliness and precision cleanliness. Under a gross cleanliness strategy acceptance is based on visual cleanliness. This approach introduces a number of concerns that render it unsuitable for controlling cleanliness of high technology products. Under the precision cleanliness strategy, subjective, visual assessment of cleanliness is replaced by objective measurement of cleanliness. When a precision cleanliness strategy is adopted there naturally arises the question: How clean is clean enough? The six commonly used methods for establishing objective cleanliness acceptance limits will be discussed. Special emphasis shall focus on the use of multiple extraction, a technique that has been demonstrated for additively manufactured parts.

  8. Crossing Borders/Border Crossings

    ERIC Educational Resources Information Center

    Kilman, Carrie

    2005-01-01

    Every year, thousands of immigrant and refugee students enter American schools. For schools, this usually means growing pains, lots of questions, and a crash course in multicultural literacy. Yet multicultural training for teachers frequently lags behind immigrant population growth. The result, educators say, can include harmful stereotypes,…

  9. Simple Additivity of Stochastic Psychological Processes: Tests and Measures.

    ERIC Educational Resources Information Center

    Balakrishnan, J. D.

    1994-01-01

    Methods of testing relatively complete (distributional) models of internal psychological processes are described. It is shown that there is a sufficient condition for additive models to imply this property of the likelihood ratio. Also discussed are the examination of hazard rate functions of component processes and change in cumulative…

  10. Cleaning and Cleanliness Measurement of Additive Manufactured Parts

    NASA Technical Reports Server (NTRS)

    Mitchell, Mark A.; Raley, Randy

    2016-01-01

    The successful acquisition and utilization of piece parts and assemblies for contamination sensitive applications requires application of cleanliness acceptance criteria. Contamination can be classified using many different schemes. One common scheme is classification as organic, ionic and particulate contaminants. These may be present in and on the surface of solid components and assemblies or may be dispersed in various gaseous or liquid media. This discussion will focus on insoluble particle contamination on the surfaces of piece parts and assemblies. Cleanliness of parts can be controlled using two strategies, referred to as gross cleanliness and precision cleanliness. Under a gross cleanliness strategy acceptance is based on visual cleanliness. This approach introduces a number of concerns that render it unsuitable for controlling cleanliness of high technology products. Under the precision cleanliness strategy, subjective, visual assessment of cleanliness is replaced by objective measurement of cleanliness. When a precision cleanliness strategy is adopted there naturally arises the question: How clean is clean enough? The methods for establishing objective cleanliness acceptance limits will be discussed.

  11. Dynamic fluid-loss measurement of oil-mud additives

    SciTech Connect

    Wyant, R.E.; Reed, R.; Sifferman, T.R.; Wooten, S.O.

    1987-03-01

    The objective of this laboratory study was to correlate the dynamic fluid loss (DFL) with the static (API high-temperature/high-pressure (HTHP)) fluid loss, the sticking coefficient, and the fluid-loss-control-agent (FLCA) concentration in oil muds. This was done as a continuing effort to use oil-mud FLCA's more efficiently in the field and to reduce pipe-sticking problems associated with deviated holes. Data were obtained with 13-lbm/gal (1558-kg/m/sup 3/) inverted-emulsion muds by use of four different types of FLCA's over wide concentration ranges, but within the limits of reasonable field usage. The DFL data (at 250/sup 0/F (121/sup 0/C) and 500-psi (3447-kPa) differential pressure) were obtained with newly developed cells in which filtration occurs in an annulus around a central permeable core. An asymmetric buildup of mud solids and fluid channeling in the annulus suggest a mechanism that would greatly increase pipe-sticking tendencies in deviated wellbores. The DFL decreased with decreasing static fluid loss. The laboratory-measured sticking coefficient, which should correlate with differential-pressure sticking in the field, was reduced as fluid loss decreased. The fluid loss generally decreased with increasing FLCA concentrations, with the major reductions occurring at concentrations of about 4 lbm/bbl (11.4 kg/m/sup 3/).

  12. Measured Capacitance Change Based on Dielectric Location Using Long Distance Measurement Electrodes with Additional Arc Electrodes

    NASA Astrophysics Data System (ADS)

    Ohchi, Masashi; Furukawa, Tatsuya

    The new measurement scheme for the permittivity distribution have been proposed and tested experimentally based on the measured capacitance using a pair of long distance electrodes with the cylindrical shield and the additional arc electrodes. We have proposed the method of the electric field visualization using the electric lines of force based on the scalar potential, moreover, we have presented the new strategy in the estimation of the capacitance based on the electrostatic energy. In the paper, we will describe the capacitance of experimental results using the experiment system, where acrylic rod are inserted, and numerical results using FEM. It is found out that the capacitance is greatly influenced by the electric field deviation due to the location of dielectrics.

  13. Interregional Patient Mobility in the Italian NHS: A Case of Badly-Managed Decentralization Comment on "Regional Incentives and Patient Cross-Border Mobility: Evidence From the Italian Experience".

    PubMed

    Neri, Stefano

    2015-01-01

    The article by Brenna and Spandonaro on interregional mobility for acute hospital care in Italy raises important issues concerning social and territorial equity in a healthcare system. Based on Regions and private providers' strategic behavior, the hypothesis adopted to explain patient cross-border mobility (CBM), demonstrated by statistical analysis, may be further explored using qualitative methods. In order to reduce CBM, the central government needs to play a more active role in coordination, even in a highly decentralized National Health Service (NHS). PMID:26673474

  14. Projected impacts of climate change on hydrology, water resource use and adaptation needs for the Chu and Talas cross-border rivers basin, Central Asia

    NASA Astrophysics Data System (ADS)

    Shamil Iliasov, Shamil; Dolgikh, Svetlana; Lipponen, Annukka; Novikov, Viktor

    2014-05-01

    on water use. Assessment of agricultural sector vulnerability, which is the key water user in the basin, led to identification of the potential adaptation measures and discussion with relevant national and river basin authorities and the major stakeholders. Proposed adaptation measures range from technical - such as rehabilitation of irrigation systems to reduce water losses, modernize water reservoirs and adjust river regulation to environmental flow needs, changing land use and crop diversification - to policy and finance measures, including revision of subsidies, economic consideration of ecosystem services, etc. Next steps include a more detailed assessment of economics, effectiveness and feasibility of the initially proposed adaptation measures and additional research.

  15. Additional flow quality measurements in the Langley Research Center 8-Foot Transonic Pressure Tunnel

    NASA Technical Reports Server (NTRS)

    Brooks, J. D.; Stainback, P. C.; Brooks, C. W., Jr.

    1980-01-01

    Additional tests were conducted to further define the disturbance characteristics of the Langley 8-Foot Transonic Pressure Tunnel. Measurements were made in the settling chamber with hot wire probes and in the test section with pressure transducers when various methods were used to choke the flow. In addition to presenting rms values measured at various locations and tunnel condition, autocorrelations and cross correlation data are also presented.

  16. 49 CFR 192.935 - What additional preventive and mitigative measures must an operator take?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... § 192.7), section 5, a risk analysis of its pipeline to identify additional measures to protect the high... and the root cause analysis to support identification of targeted additional preventative and..., unstable suspension bridge) is a threat to the integrity of a covered segment, the operator must...

  17. 49 CFR 192.935 - What additional preventive and mitigative measures must an operator take?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... § 192.7), section 5, a risk analysis of its pipeline to identify additional measures to protect the high... and the root cause analysis to support identification of targeted additional preventative and..., unstable suspension bridge) is a threat to the integrity of a covered segment, the operator must...

  18. Analysis of error-prone survival data under additive hazards models: measurement error effects and adjustments.

    PubMed

    Yan, Ying; Yi, Grace Y

    2016-07-01

    Covariate measurement error occurs commonly in survival analysis. Under the proportional hazards model, measurement error effects have been well studied, and various inference methods have been developed to correct for error effects under such a model. In contrast, error-contaminated survival data under the additive hazards model have received relatively less attention. In this paper, we investigate this problem by exploring measurement error effects on parameter estimation and the change of the hazard function. New insights of measurement error effects are revealed, as opposed to well-documented results for the Cox proportional hazards model. We propose a class of bias correction estimators that embraces certain existing estimators as special cases. In addition, we exploit the regression calibration method to reduce measurement error effects. Theoretical results for the developed methods are established, and numerical assessments are conducted to illustrate the finite sample performance of our methods. PMID:26328545

  19. Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

    PubMed Central

    Dźwiarek, Marek; Latała, Agata

    2016-01-01

    This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

  20. Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery.

    PubMed

    Dźwiarek, Marek; Latała, Agata

    2016-01-01

    This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005-2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

  1. 49 CFR 192.935 - What additional preventive and mitigative measures must an operator take?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    .... (2) Outside force damage. If an operator determines that outside force (e.g., earth movement, floods... implementing additional inspection and maintenance programs. (b) Third party damage and outside force damage... measures to minimize the consequences to the covered segment from outside force damage. These...

  2. 49 CFR 192.935 - What additional preventive and mitigative measures must an operator take?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    .... (2) Outside force damage. If an operator determines that outside force (e.g., earth movement, floods... implementing additional inspection and maintenance programs. (b) Third party damage and outside force damage... measures to minimize the consequences to the covered segment from outside force damage. These...

  3. 40 CFR 52.1163 - Additional control measures for East Boston.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Boston. 52.1163 Section 52.1163 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Additional control measures for East Boston. (a) On or before December 31, 1975, the Governor, the Mayor of the City of Boston, the Chairman of the Massachusetts Bay Transportation Authority, the Chairman...

  4. 40 CFR 52.1163 - Additional control measures for East Boston.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Boston. 52.1163 Section 52.1163 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Additional control measures for East Boston. (a) On or before December 31, 1975, the Governor, the Mayor of the City of Boston, the Chairman of the Massachusetts Bay Transportation Authority, the Chairman...

  5. 40 CFR 52.1163 - Additional control measures for East Boston.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Boston. 52.1163 Section 52.1163 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Additional control measures for East Boston. (a) On or before December 31, 1975, the Governor, the Mayor of the City of Boston, the Chairman of the Massachusetts Bay Transportation Authority, the Chairman...

  6. 40 CFR 52.1163 - Additional control measures for East Boston.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Boston. 52.1163 Section 52.1163 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Additional control measures for East Boston. (a) On or before December 31, 1975, the Governor, the Mayor of the City of Boston, the Chairman of the Massachusetts Bay Transportation Authority, the Chairman...

  7. 49 CFR 192.935 - What additional preventive and mitigative measures must an operator take?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... implementing additional inspection and maintenance programs. (b) Third party damage and outside force damage.... (2) Outside force damage. If an operator determines that outside force (e.g., earth movement, floods... measures to minimize the consequences to the covered segment from outside force damage. These......

  8. Methods of Measuring Vapor Pressures of Lubricants With Their Additives Using TGA and/or Microbalances

    NASA Technical Reports Server (NTRS)

    Scialdone, John J.; Miller, Michael K.; Montoya, Alex F.

    1996-01-01

    The life of a space system may be critically dependent on the lubrication of some of its moving parts. The vapor pressure, the quantity of the available lubricant, the temperature and the exhaust venting conductance passage are important considerations in the selection and application of a lubricant. In addition, the oil additives employed to provide certain properties of low friction, surface tension, antioxidant and load bearing characteristics, are also very important and need to be known with regard to their amounts and vapor pressures. This paper reports on the measurements and analyses carried out to obtain those parameters for two often employed lubricants, the Apiezon(TM)-C and the Krytox(TM) AB. The measurements were made employing an electronic microbalance and a thermogravimetric analyzer (TGA) modified to operate in a vacuum. The results have been compared to other data on these oils when available. The identification of the mass fractions of the additives in the oil and their vapor pressures as a function of the temperature were carried out. These may be used to estimate the lubricant life given its quantity and the system vent exhaust conductance. It was found that the Apiezon(TM)-C has three main components with different rates of evaporation while the Krytox(TM) did not indicate any measurable additive.

  9. Weak hierarchies associated with similarity measures--an additive clustering technique.

    PubMed

    Bandelt, H J; Dress, A W

    1989-01-01

    A new and apparently rather useful and natural concept in cluster analysis is studied: given a similarity measure on a set of objects, a sub-set is regarded as a cluster if any two objects a, b inside this sub-set have greater similarity than any third object outside has to at least one of a, b. These clusters then form a closure system which can be described as a hypergraph without triangles. Conversely, given such a system, one may attach some weight to each cluster and then compose a similarity measure additively, by letting the similarity of a pair be the sum of weights of the clusters containing that particular pair. The original clusters can be reconstructed from the obtained similarity measure. This clustering model is thus located between the general additive clustering model of Shepard and Arabie (1979) and the standard hierarchical model. Potential applications include fitting dendrograms with few additional nonnested clusters and simultaneous representation of some families of multiple dendrograms (in particular, two-dendrogram solutions), as well as assisting the search for phylogenetic relationships by proposing a somewhat larger system of possibly relevant "family groups", from which an appropriate choice (based on additional insight or individual preferences) remains to be made. PMID:2706398

  10. Examples of the great cross-border floods in Central Europe and lessons learnt (case studies: September and November 1890 on the occasion of their 120 anniversary)

    NASA Astrophysics Data System (ADS)

    Munzar, Jan; et al.

    2010-05-01

    With the respect to the size of extreme floods far beyond the borders of neighbouring countries, their research and comparison are possible only on the basis of a long-term international cooperation. There is only limited knowledge about the impacts of important historic floods affecting at the same time territories of multiple countries and attempts at flood-control measures in the past. E.g. only short time after catastrophic flood in September 1890 of European scope the imperial and royal governor of Bohemia issued in January 1891 a decree on the introduction of flood warning service on Czech rivers with instructions and a duty to send reports and warnings to Dresden, too. With respect to the fact that this flood occurred on an extensive part of Europe including the Danube R., the event became the last impulse for the establishment of an integrated hydrographic service in an Austrian Monarchy with the headquarters in Vienna in 1893. In comparison with the first case from September 1890 is the second one - the important flood from the end of November 1890, which affected e.g. Ohře/Eger R. in Bohemia (and destroyed the well-known spa Carlsbad) and simultaneously Saale R. in Thuringia, is up today practically without the attention of specialists: therefore is in focus of our contribution.

  11. Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision

    NASA Astrophysics Data System (ADS)

    Xiong, Jun; Zhang, Guangjun

    2013-11-01

    Additive manufacturing based on gas metal arc welding is an advanced technique for depositing fully dense components with low cost. Despite this fact, techniques to achieve accurate control and automation of the process have not yet been perfectly developed. The online measurement of the deposited bead geometry is a key problem for reliable control. In this work a passive vision-sensing system, comprising two cameras and composite filtering techniques, was proposed for real-time detection of the bead height and width through deposition of thin walls. The nozzle to the top surface distance was monitored for eliminating accumulated height errors during the multi-layer deposition process. Various image processing algorithms were applied and discussed for extracting feature parameters. A calibration procedure was presented for the monitoring system. Validation experiments confirmed the effectiveness of the online measurement system for bead geometry in layered additive manufacturing.

  12. A new approach to handle additive and multiplicative uncertainties in the measurement for ? LPV filtering

    NASA Astrophysics Data System (ADS)

    Lacerda, Márcio J.; Tognetti, Eduardo S.; Oliveira, Ricardo C. L. F.; Peres, Pedro L. D.

    2016-04-01

    This paper presents a general framework to cope with full-order ? linear parameter-varying (LPV) filter design subject to inexactly measured parameters. The main novelty is the ability of handling additive and multiplicative uncertainties in the measurements, for both continuous and discrete-time LPV systems, in a unified approach. By conveniently modelling scheduling parameters and uncertainties affecting the measurements, the ? filter design problem can be expressed in terms of robust matrix inequalities that become linear when two scalar parameters are fixed. Therefore, the proposed conditions can be efficiently solved through linear matrix inequality relaxations based on polynomial solutions. Numerical examples are presented to illustrate the improved efficiency of the proposed approach when compared to other methods and, more important, its capability to deal with scenarios where the available strategies in the literature cannot be used.

  13. Say Hola: Crossing Borders, Enriching Lives.

    ERIC Educational Resources Information Center

    Gates, Michele; Farris, Pamela

    1998-01-01

    Describes a thematic unit of study, carried out in a kindergarten class, on traditional aspects of Mexican life. Describes class activities, unit objectives, and student responses in the unit involving geography, art, literacy, and Mexican culture. (SR)

  14. Crossing borders: the DNA of physics

    NASA Astrophysics Data System (ADS)

    Beijerinck, H. C. W.

    2015-01-01

    In cell culture, the physical environment plays an important role: "Everything is everywhere, but the environment selects"[1]. The education of physicists can be viewed within this framework. The Petri dish for the reproduction of physicists is a university research group. The full professor is its DNA. The selection process of new professors - new DNA - is a determining step in creating the right culture. [1] M.W. Beijerinck and L.G.M. Baas Becking, en.wikipedia.org.

  15. Crossing Borders to Teach English Language Learners

    ERIC Educational Resources Information Center

    Haworth, Penny

    2008-01-01

    A teacher's identity is thought to evolve in a continuous, situated fashion, amidst dynamic interaction between cognitive, affective, social, cultural and political factors. However, the literature provides little insight into the impact on the ongoing identity construction of class teachers when they encounter a few students with English as an…

  16. Cross-Border Higher Education, Who Profits?

    ERIC Educational Resources Information Center

    Martin, Graeme; Peim, Nick

    2011-01-01

    Emphasis on "the knowledge economy", the commodification of public services, the massification of HE and decreases in public funding of education are the context for new forms of educational provision. Some nations have led the demand for and provision of cross-national educational services. The largest exporters of Higher Education have been the…

  17. Boundedness of completely additive measures with application to 2-local triple derivations

    NASA Astrophysics Data System (ADS)

    Hamhalter, Jan; Kudaybergenov, Karimbergen; Peralta, Antonio M.; Russo, Bernard

    2016-02-01

    We prove a Jordan version of Dorofeev's boundedness theorem for completely additive measures and use it to show that every (not necessarily linear nor continuous) 2-local triple derivation on a continuous JBW∗-triple is a triple derivation. 2-local triple derivations are well understood on von Neumann algebras. JBW*-triples, which are properly defined in Section I, are intimately related to infinite dimensional holomorphy and include von Neumann algebras as special cases. In particular, continuous JBW∗-triples can be realized as subspaces of continuous von Neumann algebras which are stable for the triple product xy∗z + zy∗x and closed in the weak operator topology.

  18. Ion Mobility-Derived Collision Cross Section As an Additional Measure for Lipid Fingerprinting and Identification

    PubMed Central

    2014-01-01

    Despite recent advances in analytical and computational chemistry, lipid identification remains a significant challenge in lipidomics. Ion-mobility spectrometry provides an accurate measure of the molecules’ rotationally averaged collision cross-section (CCS) in the gas phase and is thus related to ionic shape. Here, we investigate the use of CCS as a highly specific molecular descriptor for identifying lipids in biological samples. Using traveling wave ion mobility mass spectrometry (MS), we measured the CCS values of over 200 lipids within multiple chemical classes. CCS values derived from ion mobility were not affected by instrument settings or chromatographic conditions, and they were highly reproducible on instruments located in independent laboratories (interlaboratory RSD < 3% for 98% of molecules). CCS values were used as additional molecular descriptors to identify brain lipids using a variety of traditional lipidomic approaches. The addition of CCS improved the reproducibility of analysis in a liquid chromatography-MS workflow and maximized the separation of isobaric species and the signal-to-noise ratio in direct-MS analyses (e.g., “shotgun” lipidomics and MS imaging). These results indicate that adding CCS to databases and lipidomics workflows increases the specificity and selectivity of analysis, thus improving the confidence in lipid identification compared to traditional analytical approaches. The CCS/accurate-mass database described here is made publicly available. PMID:25495617

  19. Continuous field measurement of N2O isotopologues using FTIR spectroscopy following 15N addition

    NASA Astrophysics Data System (ADS)

    Phillips, R. L.; Griffith, D. W.; Dijkstra, F. A.; Lugg, G.; Lawrie, R.; Macdonald, B.

    2012-12-01

    Anthropogenic additions of fertilizer nitrogen (N) have significantly increased the mole fraction of nitrous oxide (N2O) in the troposphere. Tracking the fate of fertilizer N and its transformation to N2O is important to advance knowledge of greenhouse gas emissions from soils. Transport and transformations are frequently studied using 15N labeling experiments, but instruments capable of continuous measurements of 15N-N2O at the surface of soil have only recently come to the fore. Our primary aim was to quantify emissions of N2O and the fraction of 15N emitted as N2O from an agricultural soil following 15N addition using a mobile Fourier Transform Infrared (FTIR) spectrometer. We set up a short-term field experiment on a coastal floodplain site near Nowra, New South Wales. We deployed an automated chamber system connected to a multi-pass cell (optical pathlength 24 m) and low resolution FTIR spectrometer to measure fluxes of all N2O isotopologues collected from five 0.25 m2 chambers every three hours. We measured N2O fluxes pre and post-application of 15N-labeled substrate as potassium nitrate (KNO3) or urea [CO(NH2)2] to the soil surface. Root mean square uncertainties for all isotopologue measurements were less than 0.3 nmol mol-1 for 1 minute average concentration measurements, and minimum detectable fluxes for each isotopologue were <0.1 ng N m-2 s-1. Emissions of all N2O isotopologues were evident immediately following 15N addition. Emissions of 14N15NO, 15N14NO and 15N15NO isotopologues subsided within 10 d, but 14N14NO fluxes were evident over the entire experiment. The figure provides an overview of the emissions. Cumulative 15N-N2O fluxes (sum of the three 15N isotopologues) per chamber for the 14 days following 15N addition ranged from 1.5 to 10.3 mg 15N-N2O m-2. The chambers were destructively sampled after 2 weeks and 15N analyzed in soil and plant material using isotope ratio mass spectrometry. Approximately 1% (range 0.7 - 1.9%) of the total amount of

  20. Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    McKeown, Joseph T.; Zweiacker, Kai; Liu, Can; Coughlin, Daniel R.; Clarke, Amy J.; Baldwin, J. Kevin; Gibbs, John W.; Roehling, John D.; Imhoff, Seth D.; Gibbs, Paul J.; Tourret, Damien; Wiezorek, Jörg M. K.; Campbell, Geoffrey H.

    2016-03-01

    Additive manufacturing (AM) of metals and alloys is becoming a pervasive technology in both research and industrial environments, though significant challenges remain before widespread implementation of AM can be realized. In situ investigations of rapid alloy solidification with high spatial and temporal resolutions can provide unique experimental insight into microstructure evolution and kinetics that are relevant for AM processing. Hypoeutectic thin-film Al-Cu and Al-Si alloys were investigated using dynamic transmission electron microscopy to monitor pulsed-laser-induced rapid solidification across microsecond timescales. Solid-liquid interface velocities measured from time-resolved images revealed accelerating solidification fronts in both alloys. The observed microstructure evolution, solidification product, and presence of a morphological instability at the solid-liquid interface in the Al-4 at.%Cu alloy are related to the measured interface velocities and small differences in composition that affect the thermophysical properties of the alloys. These time-resolved in situ measurements can inform and validate predictive modeling efforts for AM.

  1. Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing

    DOE PAGESBeta

    McKeown, Joseph T.; Zweiacker, Kai; Liu, Can; Coughlin, Daniel R.; Clarke, Amy J.; Baldwin, J. Kevin; Gibbs, John W.; Roehling, John D.; Imhoff, Seth D.; Gibbs, Paul J.; et al

    2016-01-27

    In research and industrial environments, additive manufacturing (AM) of metals and alloys is becoming a pervasive technology, though significant challenges remain before widespread implementation of AM can be realized. In situ investigations of rapid alloy solidification with high spatial and temporal resolutions can provide unique experimental insight into microstructure evolution and kinetics that are relevant for AM processing. Hypoeutectic thin-film Al–Cu and Al–Si alloys were investigated using dynamic transmission electron microscopy to monitor pulsed-laser-induced rapid solidification across microsecond timescales. Solid–liquid interface velocities measured from time-resolved images revealed accelerating solidification fronts in both alloys. We observed microstructure evolution, solidification product, andmore » presence of a morphological instability at the solid–liquid interface in the Al–4 at.%Cu alloy are related to the measured interface velocities and small differences in composition that affect the thermophysical properties of the alloys. These time-resolved in situ measurements can inform and validate predictive modeling efforts for AM.« less

  2. Longitudinal and transversal bioimpedance measurements in addition to diagnosis of heart failure

    NASA Astrophysics Data System (ADS)

    Ribas, N.; Nescolarde, L.; Domingo, M.; Gastelurrutia, P.; Bayés-Genis, A.; Rosell-Ferrer, J.

    2010-04-01

    Heart Failure (HF) is a clinical syndrome characterised by signs of systemic and pulmonary fluid retention, shortness of breath and/or fatigue. There is a lack of reliable indicators of disease state. Benefits and applicability of non-invasive bioimpedance measurement in the hydration state of soft tissues have been validated, fundamentally, in dialysis patients. Four impedance configurations (2 longitudinal and 2 transversal) were analyzed in 48 HF patients (M=28, F=20) classified according to a clinical disease severity score (CDSS) derived from the Framingham criteria: CDSS<=2 (G1: M = 23, F = 14) and CDSS>2 (G2: M = 5, F = 6). The aim of this study is to analyze longitudinal and transversal bioimpedance measurement at 50 kHz, in addition to clinical diagnosis parameters of heart failure, including: clinical disease severity score (CDSS) and a biomarker concentrations (NT-proBNP). The Kolmogorov-Smirnov test was used for the normality test of all variables. The CDSS, NTproBNP and impedance parameters between groups (G1 and G2) were compared by mean of Mann Withney U-test. The statistical significance was considered with P < 0.05. Whole-body impedance measured was analyzed using RXc graph.

  3. Improvement of ocean loading correction on gravity data with additional tide gauge measurements

    NASA Astrophysics Data System (ADS)

    Neumeyer, Juergen; del Pino, Jorge; Dierks, Olaf; Sun, He-Ping; Pflug, Hartmut

    2005-08-01

    Because a gravimeter records the sum of all gravity variations associated with mass redistribution in its near and far surrounding the investigation of a single special gravity effect (e.g. Earth tides or core modes) requires the reduction of all other effects from the data. In our study, we are dealing with the ocean loading effect. High-precision tidal gravity and atmospheric pressure observations are carried out at the station Rio Carpintero in combination with tide gauge measurements at the coast of Santiago de Cuba. The gravity data are subjected to atmospheric pressure and ocean loading corrections with different oceanic tidal models. In order to test the efficiency of the different ocean loading corrections the gravity data are analysed for various tidal waves and the determined Earth tide parameters are compared with model parameters. Additionally, tide gauge measurements are analysed and used for improving the ocean loading correction on gravity data. The results show that present-day global oceanic tidal models, e.g. NAO99b and FES2002 in combination with the ocean loading calculation program (LOAD97), are not sufficient for a complete correction of this effect. With our approach, the discrepancies between the observed Earth tide parameters and those from theoretical prediction for main waves in diurnal and semidiurnal tidal bands are further reduced when taking into account the tide gauge data recorded offshore. After additional removal of oceanic signals, based on the tide gauge data, the analysed Earth tide parameters are closer to the Wahr-Dehant model. The improvement is up to 4% and the noise is reduced from 20 nm/s 2 to 10 nm/s 2 within the examined period range of 10-1500 min. Therefore, high-precision gravity measurements (e.g. with Superconducting Gravimeters), especially for stations near the coastal lines, should take into account tide gauge measurements for the ocean loading correction. With improved ocean loading correction and reduced noise

  4. Non-additivity of molecule-surface van der Waals potentials from force measurements

    NASA Astrophysics Data System (ADS)

    Wagner, Christian; Fournier, Norman; Ruiz, Victor G.; Li, Chen; Müllen, Klaus; Rohlfing, Michael; Tkatchenko, Alexandre; Temirov, Ruslan; Tautz, F. Stefan

    2014-11-01

    Van der Waals (vdW) forces act ubiquitously in condensed matter. Despite being weak on an atomic level, they substantially influence molecular and biological systems due to their long range and system-size scaling. The difficulty to isolate and measure vdW forces on a single-molecule level causes our present understanding to be strongly theory based. Here we show measurements of the attractive potential between differently sized organic molecules and a metal surface using an atomic force microscope. Our choice of molecules and the large molecule-surface separation cause this attraction to be purely of vdW type. The experiment allows testing the asymptotic vdW force law and its validity range. We find a superlinear growth of the vdW attraction with molecular size, originating from the increased deconfinement of electrons in the molecules. Because such non-additive vdW contributions are not accounted for in most first-principles or empirical calculations, we suggest further development in that direction.

  5. Non-additivity of molecule-surface van der Waals potentials from force measurements

    PubMed Central

    Wagner, Christian; Fournier, Norman; Ruiz, Victor G.; Li, Chen; Müllen, Klaus; Rohlfing, Michael; Tkatchenko, Alexandre; Temirov, Ruslan; Tautz, F. Stefan

    2014-01-01

    Van der Waals (vdW) forces act ubiquitously in condensed matter. Despite being weak on an atomic level, they substantially influence molecular and biological systems due to their long range and system-size scaling. The difficulty to isolate and measure vdW forces on a single-molecule level causes our present understanding to be strongly theory based. Here we show measurements of the attractive potential between differently sized organic molecules and a metal surface using an atomic force microscope. Our choice of molecules and the large molecule-surface separation cause this attraction to be purely of vdW type. The experiment allows testing the asymptotic vdW force law and its validity range. We find a superlinear growth of the vdW attraction with molecular size, originating from the increased deconfinement of electrons in the molecules. Because such non-additive vdW contributions are not accounted for in most first-principles or empirical calculations, we suggest further development in that direction. PMID:25424490

  6. Non-linearity measurements of solar cells with an LED-based combinatorial flux addition method

    NASA Astrophysics Data System (ADS)

    Hamadani, Behrang H.; Shore, Andrew; Roller, John; Yoon, Howard W.; Campanelli, Mark

    2016-02-01

    We present a light emitting diode (LED)-based system utilizing a combinatorial flux addition method to investigate the non-linear relationship in solar cells between the output current of the cell and the incident irradiance level. The magnitude of the light flux is controlled by the supplied currents to two LEDs (or two sets of them) in a combinatorial fashion. The signals measured from the cell are arranged within a related overdetermined linear system of equations derived from an appropriately chosen Nth degree polynomial representing the relationship between the measured signals and the incident fluxes. The flux values and the polynomial coefficients are then solved for by linear least squares to obtain the best fit. The technique can be applied to any solar cell, under either monochromatic or broadband spectrum. For the unscaled solution, no reference detectors or prior calibrations of the light flux are required. However, if at least one calibrated irradiance value is known, then the entire curve can be scaled to an appropriate spectral responsivity value. Using this technique, a large number of data points can be obtained in a relatively short time scale over a large signal range.

  7. Modeling particulate matter concentrations measured through mobile monitoring in a deletion/substitution/addition approach

    NASA Astrophysics Data System (ADS)

    Su, Jason G.; Hopke, Philip K.; Tian, Yilin; Baldwin, Nichole; Thurston, Sally W.; Evans, Kristin; Rich, David Q.

    2015-12-01

    Land use regression modeling (LUR) through local scale circular modeling domains has been used to predict traffic-related air pollution such as nitrogen oxides (NOX). LUR modeling for fine particulate matters (PM), which generally have smaller spatial gradients than NOX, has been typically applied for studies involving multiple study regions. To increase the spatial coverage for fine PM and key constituent concentrations, we designed a mobile monitoring network in Monroe County, New York to measure pollutant concentrations of black carbon (BC, wavelength at 880 nm), ultraviolet black carbon (UVBC, wavelength at 3700 nm) and Delta-C (the difference between the UVBC and BC concentrations) using the Clarkson University Mobile Air Pollution Monitoring Laboratory (MAPL). A Deletion/Substitution/Addition (D/S/A) algorithm was conducted, which used circular buffers as a basis for statistics. The algorithm maximizes the prediction accuracy for locations without measurements using the V-fold cross-validation technique, and it reduces overfitting compared to other approaches. We found that the D/S/A LUR modeling approach could achieve good results, with prediction powers of 60%, 63%, and 61%, respectively, for BC, UVBC, and Delta-C. The advantage of mobile monitoring is that it can monitor pollutant concentrations at hundreds of spatial points in a region, rather than the typical less than 100 points from a fixed site saturation monitoring network. This research indicates that a mobile saturation sampling network, when combined with proper modeling techniques, can uncover small area variations (e.g., 10 m) in particulate matter concentrations.

  8. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Tank, Jennifer; Sobota, Daniel; O'Brien, Jon; Webster, Jackson; Valett, H. Maurice; Dodds, Walter; Poole, Geoff; Peterson, Chris G.; Meyer, Judy; McDowell, William; Johnson, Sherri; Hamilton, Stephen; Gregory, Stanley; Grimm, Nancy; Dahm, Cliff; Cooper, Lee W; Ashkenas, Linda; Thomas, Suzanne; Sheibley, Rich; Potter, Jody; Niederlehner, Bobbie; Johnson, Laura; Helton, Ashley; Crenshaw, Chelsea; Burgin, Amy; Bernot, Melody; Beaulieu, Jake; Arango, Clay

    2009-01-01

    We measured uptake length of {sup 15}NO{sub 3}{sup -} in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO{sub 3}{sup -} uptake length. As part of the Lotic Intersite Nitrogen Experiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO{sub 3}{sup -} concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO{sub 3}{sup -} uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S{sub Wtot}). Uptake length increased with specific discharge (Q/w) and increasing NO{sub 3}{sup -} concentrations, showing a loss in removal efficiency in streams with high NO{sub 3}{sup -} concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO{sub 3}{sup -} removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO{sub 3}{sup -} uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO{sub 3}{sup -} uptake lengths via directly increasing both gross primary production and NO{sub 3}{sup -} concentration. Gross primary production shortened S{sub Wtot}, while increasing NO{sub 3}{sup -} lengthened S{sub Wtot} resulting in no net effect of land use on NO{sub 3}{sup -} removal.

  9. Nitrate removal in stream ecosystems measured by 15N addition experiments: 2. Denitrification

    SciTech Connect

    Mulholland, Patrick J; Hall, Robert; Sobota, Daniel; Dodds, Walter; Findlay, Stuart; Grimm, Nancy; Hamilton, Stephen; McDowell, William; O'Brien, Jon; Tank, Jennifer; Ashkenas, Linda; Cooper, Lee W; Dahm, Cliff; Gregory, Stanley; Johnson, Sherri; Meyer, Judy; Peterson, Bruce; Poole, Geoff; Valett, H. Maurice; Webster, Jackson; Arango, Clay; Beaulieu, Jake; Bernot, Melody; Burgin, Amy; Crenshaw, Chelsea; Helton, Ashley; Johnson, Laura; Niederlehner, Bobbie; Potter, Jody; Sheibley, Rich; Thomas, Suzanne

    2009-01-01

    We measured denitrification rates using a field {sup 15}N-NO{sub 3}{sup -} tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (S{sub Wden}) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N{sub 2} production rates far exceeded N{sub 2}O production rates in all streams. The fraction of total NO{sub 3}{sup -} removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NH{sub 4}{sup +} concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling S{sub Wden} were specific discharge (discharge/width) and NO{sub 3}{sup -} concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (U{sub den}) and NO{sub 3}{sup -} concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although U{sub den} increased with increasing NO{sub 3}{sup -} concentration, the efficiency of NO{sub 3}{sup -} removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO{sub 3}{sup -} load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO{sub 3}{sup -} concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO{sub 3}{sup -} concentration.

  10. Nitrate removal in stream ecosystems measured by 15N addition experiments: Denitrification

    USGS Publications Warehouse

    Mulholland, P.J.; Hall, R.O., Jr.; Sobota, D.J.; Dodds, W.K.; Findlay, S.E.G.; Grimm, N. B.; Hamilton, S.K.; McDowell, W.H.; O'Brien, J. M.; Tank, J.L.; Ashkenas, L.R.; Cooper, L.W.; Dahm, Clifford N.; Gregory, S.V.; Johnson, S.L.; Meyer, J.L.; Peterson, B.J.; Poole, G.C.; Valett, H.M.; Webster, J.R.; Arango, C.P.; Beaulieu, J.J.; Bernot, M.J.; Burgin, A.J.; Crenshaw, C.L.; Helton, A.M.; Johnson, L.T.; Niederlehner, B.R.; Potter, J.D.; Sheibley, R.W.; Thomasn, S.M.

    2009-01-01

    We measured denitrification rates using a field 15N-NO- 3 tracer-addition approach in a large, cross-site study of nitrate uptake in reference, agricultural, and suburban-urban streams. We measured denitrification rates in 49 of 72 streams studied. Uptake length due to denitrification (SWden) ranged from 89 m to 184 km (median of 9050 m) and there were no significant differences among regions or land-use categories, likely because of the wide range of conditions within each region and land use. N2 production rates far exceeded N2O production rates in all streams. The fraction of total NO-3 removal from water due to denitrification ranged from 0.5% to 100% among streams (median of 16%), and was related to NHz 4 concentration and ecosystem respiration rate (ER). Multivariate approaches showed that the most important factors controlling SWden were specific discharge (discharge / width) and NO-3 concentration (positive effects), and ER and transient storage zones (negative effects). The relationship between areal denitrification rate (Uden) and NO- 3 concentration indicated a partial saturation effect. A power function with an exponent of 0.5 described this relationship better than a Michaelis-Menten equation. Although Uden increased with increasing NO- 3 concentration, the efficiency of NO-3 removal from water via denitrification declined, resulting in a smaller proportion of streamwater NO-3 load removed over a given length of stream. Regional differences in stream denitrification rates were small relative to the proximate factors of NO-3 concentration and ecosystem respiration rate, and land use was an important but indirect control on denitrification in streams, primarily via its effect on NO-3 concentration. ?? 2009.

  11. Nitrate removal in stream ecosystems measured by 15N addition experiments: Total uptake

    USGS Publications Warehouse

    Hall, R.O., Jr.; Tank, J.L.; Sobota, D.J.; Mulholland, P.J.; O'Brien, J. M.; Dodds, W.K.; Webster, J.R.; Valett, H.M.; Poole, G.C.; Peterson, B.J.; Meyer, J.L.; McDowell, W.H.; Johnson, S.L.; Hamilton, S.K.; Grimm, N. B.; Gregory, S.V.; Dahm, Clifford N.; Cooper, L.W.; Ashkenas, L.R.; Thomas, S.M.; Sheibley, R.W.; Potter, J.D.; Niederlehner, B.R.; Johnson, L.T.; Helton, A.M.; Crenshaw, C.M.; Burgin, A.J.; Bernot, M.J.; Beaulieu, J.J.; Arangob, C.P.

    2009-01-01

    We measured uptake length of 15NO-3 in 72 streams in eight regions across the United States and Puerto Rico to develop quantitative predictive models on controls of NO-3 uptake length. As part of the Lotic Intersite Nitrogen eXperiment II project, we chose nine streams in each region corresponding to natural (reference), suburban-urban, and agricultural land uses. Study streams spanned a range of human land use to maximize variation in NO-3 concentration, geomorphology, and metabolism. We tested a causal model predicting controls on NO-3 uptake length using structural equation modeling. The model included concomitant measurements of ecosystem metabolism, hydraulic parameters, and nitrogen concentration. We compared this structural equation model to multiple regression models which included additional biotic, catchment, and riparian variables. The structural equation model explained 79% of the variation in log uptake length (S Wtot). Uptake length increased with specific discharge (Q/w) and increasing NO-3 concentrations, showing a loss in removal efficiency in streams with high NO-3 concentration. Uptake lengths shortened with increasing gross primary production, suggesting autotrophic assimilation dominated NO-3 removal. The fraction of catchment area as agriculture and suburban-urban land use weakly predicted NO-3 uptake in bivariate regression, and did improve prediction in a set of multiple regression models. Adding land use to the structural equation model showed that land use indirectly affected NO-3 uptake lengths via directly increasing both gross primary production and NO-3 concentration. Gross primary production shortened SWtot, while increasing NO-3 lengthened SWtot resulting in no net effect of land use on NO- 3 removal. ?? 2009.

  12. Non-additivity of molecule-surface van der Waals potentials from force measurements

    NASA Astrophysics Data System (ADS)

    Tautz, Stefan

    2014-03-01

    Van der Waals (vdW) forces act ubiquitously in condensed matter. Their description as an inherently quantum mechanical phenomenon was developed for single atoms and homogeneous macroscopic bodies by London, Casimir, and Lifshitz. For intermediate-sized objects like organic molecules an atomistic description is required, but explicit first principles calculations are very difficult since correlations between many interacting electrons have to be considered. Hence, semi-empirical correction schemes are often used that simplify the vdW interaction to a sum over atom-pair potentials. A similar gap exists between successful measurements of vdW and Casimir forces for single atoms on the one hand and macroscopic bodies on the other, as comparable experiments for molecules are absent. I will present experiments in which long-range vdW potentials between a series of related molecules and a metal surface have been determined experimentally. The experiments rely on the extremely sensitive force detection of an atomic force microscope in combination with its molecular manipulation capabilities. The results allow us to confirm the asymptotic force law and to quantify the non-additive part of the vdW interaction which is particularly challenging for theory. In the present case, cooperative effects account for 10% of the total interaction. This effect is of general validity in molecules and thus relevant at the intersection of chemistry, physics, biology, and materials science.

  13. Effect of silica fume addition on the PGNAA measurement of chlorine in concrete.

    PubMed

    Naqvi, A A; Maslehuddin, M; Garwan, M A; Nagadi, M M; Al-Amoudi, O S B; Raashid, M; Khateeb-ur-Rehman

    2010-03-01

    Pozzolanic materials, such as fly ash (FA), silica fume (SF), and blast furnace slag (BFS) are added to Portland cement in concrete to prevent reinforcement steel corrosion in concrete. Further preventive measure against reinforcement steel corrosion require monitoring of chloride salts concentration in concrete using non-destructive techniques, such as the prompt gamma-ray neutron activation analysis (PGNAA) technique. Due to interferences between gamma-rays from chlorine and calcium in PGNAA technique, detection limit of chlorine in concrete strongly depends upon calcium concentration in concrete. SF mainly contains silica and its addition to cement concrete reduces overall concentration of calcium in concrete. This may result in an improvement in detection limit of chlorine in SF-based concrete in PGNAA studies. Particularly for chlorine detection using 6.11 and 6.62 MeV prompt gamma-rays that strongly interfere with 6.42 MeV prompt gamma-rays from calcium. In this study, SF was added to Portland cement to prevent concrete reinforcement steel from corrosion. The chlorine concentration in SF cement concrete specimens containing 0.2-3.0 wt% chlorine was measured through yield of 1.16, 1.95, 6.11, 6.62, 7.41, 7.79, and 8.58 MeV chlorine gamma-rays using PGNAA technique. An excellent agreement was noted between the experimental yield of the prompt gamma-rays and the gamma-ray yield calculated through the Monte Carlo simulations. Further the minimum detectable concentration (MDC) of chlorine in SF cement concrete was calculated and compared with the MDC values of chlorine in plain concrete and concrete mixed with fly ash cement. The MDC of chlorine in SF-based concrete through 6.11 MeV, and 6.62 MeV chlorine gamma-rays was found to be improved as compared to those in plain concrete and concrete mixed with fly ash cement. PMID:20042342

  14. 42 CFR 414.1230 - Additional measures for groups of physicians.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... potentially preventable hospital admissions for heart failure, chronic obstructive pulmonary disease, and diabetes. The rate of potentially preventable hospital admissions for diabetes is a composite measure...

  15. 42 CFR 414.1230 - Additional measures for groups of physicians.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... potentially preventable hospital admissions for heart failure, chronic obstructive pulmonary disease, and diabetes. The rate of potentially preventable hospital admissions for diabetes is a composite measure...

  16. Voice measures of workload in the advanced flight deck: Additional studies

    NASA Technical Reports Server (NTRS)

    Schneider, Sid J.; Alpert, Murray

    1989-01-01

    These studies investigated acoustical analysis of the voice as a measure of workload in individual operators. In the first study, voice samples were recorded from a single operator during high, medium, and low workload conditions. Mean amplitude, frequency, syllable duration, and emphasis all tended to increase as workload increased. In the second study, NASA test pilots performed a laboratory task, and used a flight simulator under differing work conditions. For two of the pilots, high workload in the simulator brought about greater amplitude, peak duration, and stress. In both the laboratory and simulator tasks, high workload tended to be associated with more statistically significant drop-offs in the acoustical measures than were lower workload levels. There was a great deal of intra-subject variability in the acoustical measures. The results suggested that in individual operators, increased workload might be revealed by high initial amplitude and frequency, followed by rapid drop-offs over time.

  17. Additional spectroscopic redshift measurements for galaxy clusters from the first Planck catalogue

    NASA Astrophysics Data System (ADS)

    Vorobyev, V. S.; Burenin, R. A.; Bikmaev, I. F.; Khamitov, I. M.; Dodonov, S. N.; Zhuchkov, R. Ya.; Irtuganov, E. N.; Mescheryakov, A. V.; Melnikov, S. S.; Semena, A. N.; Tkachenko, A. Yu.; Aghanim, N.; Sunyaev, R. A.

    2016-02-01

    We present the results of spectroscopic redshift measurements for the galaxy clusters from the first all-sky Planck catalogue that have been mostly identified based on the optical observations performed previously by our team (Planck Collaboration 2015a). Data on 13 galaxy clusters at redshifts from z ≈ 0.2 to z ≈ 0.8, including the improved identification and redshift measurement for the cluster PSZ1 G141.73+14.22 at z = 0.828, are provided. We have performed the measurements based on data from the Russian-Turkish 1.5-m telescope (RTT-150), the 2.2-m Calar Alto Observatory telescope, and the 6-m SAO RAS telescope (Bolshoy Teleskop Azimutalnyi, BTA).

  18. Additional atmospheric opacity measurements at lambda = 1.1 mm from Mauna Kea Observatory, Hawaii

    NASA Technical Reports Server (NTRS)

    Parrish, A.; De Zafra, R. L.; Barrett, J. W.; Solomon, P.; Connor, B.

    1987-01-01

    Atmospheric opacity values in the zenith direction are given for a wavelength of 1.1 mm (278 GHz) at the summit of Mauna Kea in the Hawaiian Islands. A total of 75 days is covered during the period 1983-1986. Observations were made on a quasi-continuous basis, with opacity measured every 20 minutes around the clock for significant periods of time. A conversion from opacity at lambda = 1.1 mm to the equivalent precipitable water vapor column is given from the measurements of Zammit and Ade (1981), from which opacities at other wavelengths may be derived.

  19. Additional measurements of the high-latitude sunspot rotation rate /Research note/

    NASA Technical Reports Server (NTRS)

    Landman, D. A.; Takushi, J. T.

    1981-01-01

    Sunspot rotation rate measurements at high sunspot latitudes are reported for the period 1966-68, based on ten spots at latitudes greater than about 28 deg from H-alpha patrol records for this period. A sidereal rotation rate of 13.70 + or - 0.07 deg/day was found on the average, at 31.05 + or - 0.01 deg. Taken together, the full set of measurements in this latitude regime yield a rotation rate that is in excellent agreement with the result derived by Newton and Nunn (1951) from recurrent spots at lower latitudes throughout the six cycles from 1878 to 1944.

  20. Additional measurements of the high-latitude sunspot rotation rate /Research note/

    NASA Astrophysics Data System (ADS)

    Landman, D. A.; Takushi, J. T.

    1981-10-01

    Sunspot rotation rate measurements at high sunspot latitudes are reported for the period 1966-68, based on ten spots at latitudes greater than about 28 deg from H-alpha patrol records for this period. A sidereal rotation rate of 13.70 + or - 0.07 deg/day was found on the average, at 31.05 + or - 0.01 deg. Taken together, the full set of measurements in this latitude regime yield a rotation rate that is in excellent agreement with the result derived by Newton and Nunn (1951) from recurrent spots at lower latitudes throughout the six cycles from 1878 to 1944.

  1. Preliminary Evidence of the Technical Adequacy of Additional Curriculum-Based Measures for Preschool Mathematics

    ERIC Educational Resources Information Center

    Polignano, Joy C.; Hojnoski, Robin L.

    2012-01-01

    There has been increased attention to the development of assessment measures for evaluating mathematical skills in young children in order to inform instruction and intervention. However, existing tools have focused primarily on number sense with little attention to other areas of mathematical thinking such as geometry and algebra. The purpose of…

  2. Turbulence measurements over immobile gravel with additions of sand from supply limited to capacity transport conditions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Measurement of the turbulence that drives sand transport over and through immobile gravels is relevant to efforts to model sediment movement downstream of dams, where fine sediments are eroded from coarse substrates and are not replaced due to the presence of the upstream dam. The relative elevatio...

  3. Assessing the use of an infrared spectrum hyperpixel array imager to measure temperature during additive and subtractive manufacturing

    NASA Astrophysics Data System (ADS)

    Whitenton, Eric; Heigel, Jarred; Lane, Brandon; Moylan, Shawn

    2016-05-01

    Accurate non-contact temperature measurement is important to optimize manufacturing processes. This applies to both additive (3D printing) and subtractive (material removal by machining) manufacturing. Performing accurate single wavelength thermography suffers numerous challenges. A potential alternative is hyperpixel array hyperspectral imaging. Focusing on metals, this paper discusses issues involved such as unknown or changing emissivity, inaccurate greybody assumptions, motion blur, and size of source effects. The algorithm which converts measured thermal spectra to emissivity and temperature uses a customized multistep non-linear equation solver to determine the best-fit emission curve. Emissivity dependence on wavelength may be assumed uniform or have a relationship typical for metals. The custom software displays residuals for intensity, temperature, and emissivity to gauge the correctness of the greybody assumption. Initial results are shown from a laser powder-bed fusion additive process, as well as a machining process. In addition, the effects of motion blur are analyzed, which occurs in both additive and subtractive manufacturing processes. In a laser powder-bed fusion additive process, the scanning laser causes the melt pool to move rapidly, causing a motion blur-like effect. In machining, measuring temperature of the rapidly moving chip is a desirable goal to develop and validate simulations of the cutting process. A moving slit target is imaged to characterize how the measured temperature values are affected by motion of a measured target.

  4. Addition of a channel for XCO observations to a portable FTIR spectrometer for greenhouse gas measurements

    NASA Astrophysics Data System (ADS)

    Hase, Frank; Frey, Matthias; Kiel, Matthäus; Blumenstock, Thomas; Harig, Roland; Keens, Axel; Orphal, Johannes

    2016-05-01

    The portable FTIR (Fourier transform infrared) spectrometer EM27/SUN, dedicated to the precise and accurate observation of column-averaged abundances of methane and carbon dioxide, has been equipped with a second detector channel, which allows the detection of additional species, especially carbon monoxide. This allows an improved characterisation of observed carbon dioxide enhancements and makes the extended spectrometer especially suitable as a validation tool of ESA's Sentinel 5 Precursor mission, as it now covers the same spectral region as used by the infrared channel of the TROPOMI (TROPOspheric Monitoring Instrument) sensor. The extension presented here does not rely on a dichroic, but instead a fraction of the solar beam is decoupled near the aperture stop of the spectrometer using a small plane mirror. This approach allows maintaining the camera-controlled solar tracker set-up, which is referenced to the field stop in front of the primary detector. Moreover, the upgrade of existing instruments can be performed without alterating the optical set-up of the primary channel and resulting changes of the instrumental characteristics of the original instrument.

  5. Time- and Isomer-Resolved Measurements of Sequential Addition of Acetylene to the Propargyl Radical.

    PubMed

    Savee, John D; Selby, Talitha M; Welz, Oliver; Taatjes, Craig A; Osborn, David L

    2015-10-15

    Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C2H2) to propargyl (C3H3) create a facile route to the PAH indene (C9H8). However, the isomeric forms of C5H5 and C7H7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl (vp-C5H5) and 2,4-cyclopentadienyl (c-C5H5) radical isomers of C5H5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equation calculations, we find that c-C5H5 + C2H2 produces only the tropyl isomer of C7H7 (tp-C7H7) below 1000 K, and that tp-C7H7 + C2H2 terminates the reaction sequence yielding C9H8 (indene) + H. This work demonstrates a pathway for PAH formation that does not proceed through benzene. PMID:26722791

  6. Neutron measurements of stresses in a test artifact produced by laser-based additive manufacturing

    SciTech Connect

    Gnäupel-Herold, Thomas; Slotwinski, John; Moylan, Shawn

    2014-02-18

    A stainless steel test artifact produced by Direct Metal Laser Sintering and similar to a proposed standardized test artifact was examined using neutron diffraction. The artifact contained a number of structures with different aspect ratios pertaining to wall thickness, height above base plate, and side length. Through spatial resolutions of the order of one millimeter the volumetric distribution of stresses in several was measured. It was found that the stresses peak in the tensile region around 500 MPa near the top surface, with balancing compressive stresses in the interior. The presence of a support structure (a one millimeter high, thin walled, hence weaker, lattice structure deposited on the base plate, followed by a fully dense AM structure) has only minor effects on the stresses.

  7. Control strategies against Campylobacter at the poultry production level: biosecurity measures, feed additives and vaccination.

    PubMed

    Meunier, M; Guyard-Nicodème, M; Dory, D; Chemaly, M

    2016-05-01

    Campylobacteriosis is the most prevalent bacterial foodborne gastroenteritis affecting humans in the European Union, and ranks second in the United States only behind salmonellosis. In Europe, there are about nine million cases of campylobacteriosis every year, making the disease a major public health issue. Human cases are mainly caused by the zoonotic pathogen Campylobacter jejuni. The main source of contamination is handling or consumption of poultry meat. Poultry constitutes the main reservoir of Campylobacter, substantial quantities of which are found in the intestines following rapid, intense colonization. Reducing Campylobacter levels in the poultry chain would decrease the incidence of human campylobacteriosis. As primary production is a crucial step in Campylobacter poultry contamination, controlling the infection at this level could impact the following links along the food chain (slaughter, retail and consumption). This review describes the control strategies implemented during the past few decades in primary poultry production, including the most recent studies. In fact, the implementation of biosecurity and hygiene measures is described, as well as the immune strategy with passive immunization and vaccination trials and the nutritional strategy with the administration of organic and fatty acids, essential oil and plant-derived compound, probiotics, bacteriocins and bacteriophages. PMID:26541243

  8. Measuring Productive Elements of Multi-Word Phrase Vocabulary Knowledge among Children with English as an Additional or Only Language

    ERIC Educational Resources Information Center

    Smith, Sara A.; Murphy, Victoria A.

    2015-01-01

    Vocabulary plays a critical role in language and reading development for children, particularly those learning English as an additional language (EAL) (Stahl & Nagy, 2006). Previous research on vocabulary has mainly focused on measuring individual words without considering multi-word phrase knowledge, despite evidence that these items occur…

  9. Ocular accommodation and cognitive demand: An additional indicator besides pupil size and cardiovascular measures?

    PubMed Central

    Jainta, Stephanie; Hoormann, Joerg; Jaschinski, Wolfgang

    2008-01-01

    Background The aim of the present study was to assess accommodation as a possible indicator of changes in the autonomic balance caused by altered cognitive demand. Accounting for accommodative responses from a human factors perspective may be motivated by the interest of designing virtual image displays or by establishing an autonomic indicator that allows for remote measurement at the human eye. Heart period, pulse transit time, and the pupillary response were considered as reference for possible closed-loop accommodative effects. Cognitive demand was varied by presenting monocularly numbers at a viewing distance of 5 D (20 cm) which had to be read, added or multiplied; further, letters were presented in a "n-back" task. Results Cardiovascular parameters and pupil size indicated a change in autonomic balance, while error rates and reaction time confirmed the increased cognitive demand during task processing. An observed decrease in accommodation could not be attributed to the cognitive demand itself for two reasons: (1) the cognitive demand induced a shift in gaze direction which, for methodological reasons, accounted for a substantial part of the observed accommodative changes. (2) Remaining effects disappeared when the correctness of task processing was taken into account. Conclusion Although the expectation of accommodation as possible autonomic indicator of cognitive demand was not confirmed, the present results are informative for the field of applied psychophysiology noting that it seems not to be worthwhile to include closed-loop accommodation in future studies. From a human factors perspective, expected changes of accommodation due to cognitive demand are of minor importance for design specifications – of, for example, complex visual displays. PMID:18721478

  10. [What additional measures should be recommended in atopic dermatitis in children?].

    PubMed

    Boralevi, F

    2005-01-01

    The so-called 'adjuvant' measures are an important part of atopic dermatitis (AD) consultations. The practitioner is the 'expert' in the patients' eyes in prescribing, proposing, counselling and replying to the questions concerning moisturizers, thermal spring water cures, the resort to alternative medical, and vaccinations. Moisturizers are aimed at rapidly restoring water in the epidermis, decreasing the sensitivity to irritants and improving the patients' comfort. The available products are usually composed of water, occlusive agents, humidifiers, varyingly combined with tensioactive agents, preservatives and perfumes... Their short term efficacy has been demonstrated, but no study has shown superiority of one product over another. The recommended treatment is 1 to 2 daily applications of a cream or lotion, selected among the products having demonstrated their efficacy, contained the least amount of irritant or sensitizers, the presentation and cost of which is acceptable to the patient. There are no arguments to recommend moisturizers in the absence of xerosis, nor for prolonged periods of clinical remission. Spring water thermal cures. In France there are many cure centres and the spring waters used are distinguished by their clinical or physical features. Although there are no studies that clearly establish their efficacy in AD, the craze and satisfaction of many patients for spring water thermal cures must be taken into consideration, as well as the educational dimension, in the hopes that a consensus will be reached and that regular assessments be made. Alternative medical practices, such as homeopathy or acupuncture, represent a therapeutic alternative chosen by more than one third of patients with AD. However, no study has sufficiently demonstrated the interest of these alternatives and they cannot therefore be integrated in the validated arsenal of treatments. Used in various oriental countries, Chinese herbs have been the subject of controlled studies

  11. Additional Value of CH₄ Measurement in a Combined (13)C/H₂ Lactose Malabsorption Breath Test: A Retrospective Analysis.

    PubMed

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-09-01

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H₂) excretion after an oral dose of lactose. We use a combined (13)C/H₂ lactose breath test that measures breath (13)CO₂ as a measure of lactose digestion in addition to H₂ and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 (13)C/H₂ lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH₄ in addition to H₂ and (13)CO₂. Based on the (13)C/H₂ breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH₄ further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H₂-excretion were found to excrete CH₄. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH₄-concentrations has an added value to the (13)C/H₂ breath test to identify methanogenic subjects with lactose malabsorption or SIBO. PMID:26371034

  12. Routing Corners of Building Structures - by the Method of Vector Addition - Measured with RTN GNSS Surveying Technology

    NASA Astrophysics Data System (ADS)

    Krzyżek, Robert

    2015-12-01

    The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.

  13. Combined analysis of passive and active seismic measurements using additional geologic data for the determination of shallow subsurface structures

    NASA Astrophysics Data System (ADS)

    Horstmann, Tobias; Brüstle, Andrea; Spies, Thomas; Schlittenhardt, Jörg; Schmidt, Bernd

    2016-04-01

    A detailed knowledge of subsurface structure is essential for geotechnical projects and local seismic hazard analyses. Passive seismic methods like microtremor measurements are widely used in geotechnical practice, but limitations and developments are still in focus of scientific discussion. The presentation outlines microtremor measurements in the context of microzonation in the scale of districts or small communities. H/V measurements are used to identify zones with similar underground properties. Subsequently a shear wave velocity (Vs) depth profile for each zone is determined by array measurements at selected sites. To reduce possible uncertainties in dispersion curve analyses of passive array measurements and ambiguities within the inversion process, we conducted an additional active seismic experiment and included available geological information. The presented work is realized in the framework of the research project MAGS2 ("Microseismic Activity of Geothermal Systems") and deals with the determination of seismic hazard analysis at sites near deep geothermal power plants in Germany. The measurements were conducted in the Upper Rhine Graben (URG) and the Bavarian molasses, where geothermal power plants are in operation. The results of the H/V- and array-measurements in the region of Landau (URG) are presented and compared to known geological-tectonic structures. The H/V measurements show several zones with similar H/V-curves which indicate homogenous underground properties. Additionally to the passive seismic measurements an active refraction experiment was performed and evaluated using the MASW method („Multichannel Analysis of Surface Waves") to strengthen the determination of shear-wave-velocity depth profile. The dispersion curves for Rayleigh-waves of the active experiment support the Rayleigh-dispersion curves from passive measurements and therefore provide a valuable supplement. Furthermore, the Rayleigh-wave ellipticity was calculated to reduce

  14. Modified TEWL in vitro measurements on transdermal patches with different additives with regard to water vapour permeability kinetics.

    PubMed

    Fokuhl, Joana; Müller-Goymann, Christel C

    2013-02-28

    Water vapour permeability (WVP) and water absorption capacity (WAC) influence physicochemical properties and wearability of transdermal patches considerably. For determination of WVP, a modified transepidermal water loss (TEWL) measurement was developed. These measurements continuously measure WVP of transdermal patches in vitro along with time required to reach steady state, and its magnitude according to the type of polymer used. Additionally, WAC of the patches was examined and related to WVP. According to literature in the field of WVP determination, usually selected points are taken from the evaporation time curve and averaged over a given time span without knowing whether steady state has already been reached or not. The latter causes errors upon averaging. The advantage of the in vitro TEWL measurement presented includes reproducibly adjustable conditions for every time span desired, thus providing information on the kinetics of the experiment and avoiding biased results from averaging. Knowing the shape of the evaporation time curve and thus the kinetics of the experiment allows for focusing on the relevant part of the measurement, i.e. the determination of the steady state level and the time to reach it. Four different polymers (P1-P4) based on sugar-modified polyacrylates were investigated with regard to WVP and WAC of the matrices prepared thereof along with the influence of drug loading and the incorporation of a variety of additives commonly used for transdermal patches. A clear correlation between WVP and the hydrophilicity in terms of the number of free hydroxyl groups of the polymer was elaborated. Additives of higher hydrophilicity compared to that of the polymer itself led to higher WVPs and vice versa. The combination of the model drug lidocaine in its free base form together with the additive succinic acid (Suc) resulted in ionization of the drug and thus in substantially increased WVPs. Addition of α-tocopherol acetate (Toc) into P3 and P4 and

  15. Effect of polyglycerol esters additive on palm oil crystallization using focused beam reflectance measurement and differential scanning calorimetry.

    PubMed

    Saw, M H; Hishamuddin, E; Chong, C L; Yeoh, C B; Lim, W H

    2017-01-01

    The effect of 0.1-0.7% (w/w) of polyglycerol esters (PGEmix-8) on palm oil crystallization was studied using focused beam reflectance measurement (FBRM) to analyze the in-line changes of crystal size distribution during the crystallization. FBRM results show that 0.1-0.5% (w/w) of PGEmix-8 did not significantly affect nucleation but slightly retarded crystal growth. The use of 0.7% (w/w) additive showed greater heterogeneous nucleation compared to those with lower dosages of additive. Crystal growth was also greatly reduced when using 0.7% (w/w) dosage. The morphological study indicated that the palm oil crystals were smaller and more even in size than when more additive was added. Isothermal crystallization studies using differential scanning calorimetry (DSC) showed increased inhibitory effects on palm oil crystal growth with increasing concentration of PGEmix-8. These results imply that PGEmix-8 is a nucleation enhancing and crystal growth retarding additive in palm oil crystallization at 0.7% (w/w) dosage. PMID:27507476

  16. Influence of oxygen addition to the carrier gas on laser-induced breakdown spectroscopy measurements on aerosols

    NASA Astrophysics Data System (ADS)

    Palazzo, N.; Migliorini, F.; Dondè, R.; Maffi, S.; De Iuliis, S.

    2016-01-01

    In this work, laser-induced breakdown spectrosopy is implemented on aerosol particles for absolute concentration analysis. The aim of this work is the investigation of the effect of the bath gas used for nebulizing the aerosol. Nitrogen, air, and 50% O2 in N2 mixture have been chosen as carrier gasses in order to analyze the effect of oxygen addition to the gas. LIBS measurements have been carried out on aerosol particles produced from CuCl2 2H2O solutions, and the 324.7 nm Cu line is considered. As a first analysis, plasma parameters, such as temperature and electron density, have been evaluated changing the carrier gas. Measurements to derive the LIBS calibration curve of the 324.7 nm Cu line are carried out in air and in N2. The significant difference in the slope of the resulting calibration curves has to be attributed to the oxygen addition to the bath gas. To explore such behavior, time-resolved measurements of the Cu line and peak/base ratio have been performed. The presence of two competitive effects have been observed that becomes significant increasing the amount of oxygen in the carrier gas. One is the oxygen-quenching effect, already observed in the literature, and the other one is the enhancement of the Cu LIBS signal, expecially at short delay times. These effects have been observed also at other Cu lines and changing the analyte source. The results are presented and widely discussed.

  17. Review on measurement techniques of transport properties of nanowires Additions and Corrections. See DOI:10.1039/C3NR03242F Click here for additional data file.

    PubMed Central

    Rojo, Miguel Muñoz; Calero, Olga Caballero; Lopeandia, A. F.; Rodriguez-Viejo, J.

    2013-01-01

    Physical properties at the nanoscale are novel and different from those in bulk materials. Over the last few decades, there has been an ever growing interest in the fabrication of nanowire structures for a wide variety of applications including energy generation purposes. Nevertheless, the study of their transport properties, such as thermal conductivity, electrical conductivity or Seebeck coefficient, remains an experimental challenge. For instance, in the particular case of nanostructured thermoelectrics, theoretical calculations have shown that nanowires offer a promising way of enhancing the hitherto low efficiency of these materials in the conversion of temperature differences into electricity. Therefore, within the thermoelectrical community there has been a great experimental effort in the measurement of these quantities in actual nanowires. The measurements of these properties at the nanoscale are also of interest in fields other than energy, such as electrical components for microchips, field effect transistors, sensors, and other low scale devices. For all these applications, knowing the transport properties is mandatory. This review deals with the latest techniques developed to perform the measurement of these transport properties in nanowires. A thorough overview of the most important and modern techniques used for the characterization of different kinds of nanowires will be shown. PMID:24113712

  18. The 1998-2000 SHADOZ (Southern Hemisphere ADditional Ozonesondes) Tropical Ozone Climatology: Comparison with TOMS and Ground-Based Measurements

    NASA Technical Reports Server (NTRS)

    Thompson, Anne M.; Witte, Jacquelyn; McPeters, Richard D.; Oltmans, Samuel J.; Schmidlin, Francis J.; Logan, Jennifer A.; Fujiwara, Masatormo; Kirchhoff, Volker W. J. H.; Posny, Francoise; Coetzee, Gerhard J. R.; Bhartia, P. K. (Technical Monitor)

    2001-01-01

    A network of 10 southern hemisphere tropical and Subtropical stations, designated the Southern Hemisphere ADditional OZonesondes, (SHADOZ) project and established from operational sites, provided over 1000 ozone profiles during the period 1998-2000. Balloon-borne electrochemical concentration cell (ECC) ozonesondes, combined with standard radiosondes for pressure, temperature and relative humidity measurements, collected profiles in the troposphere and lower- to mid-stratosphere at: Ascension Island; Nairobi, Kenya; Irene, South Africa: Reunion Island, Watukosek Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil.

  19. A new life for a 10-year old MueTec2010 CD measurement system: the ultimate precision upgrade with additional film thickness measurement capability

    NASA Astrophysics Data System (ADS)

    Cassol, Gian Luca; Bianucci, Giovanni; Murai, Shiaki; Falk, Günther; Scheuring, Gerd; Döbereiner, Stefan; Brück, Hans-Jürgen

    2006-06-01

    A 10-year old MueTec2010, white light CD measurement system, installed at DNP Photomask Europe and previously owned by STMicroelectronics, has been upgraded to fulfill the high-end optical CD measurement requirements, and to add the film thickness measurement capability. That is the ultimate upgrade, consisting of two new computers with WINDOWS 2000 operating system, a new 150X measurement objective, a new 16-bit CCD digital camera, a new tube lens for the old Leica Ergoplan microscope, and the NanoStar software with the pattern recognition option. The upgrade yielded an average 45% repeatability improvement for isolated and dense lines and spaces, with 1.2nm average repeatability in a 0.3-10μm CD nominal range. Contact holes report an average 50% repeatability improvement, with 2.5nm average repeatability. The improved precision allows a +/-2-nm CD calibration and correlation down to 0.4μm CD nominal. Overall, the upgraded MueTec2010 shows same or better performance than the already installed Leica LWM250UV CD measurement system, despite the longer illumination wavelength of the former. The improved short and long term repeatability reduced the Gauge RandR figure from 24% to 11% at +/-20nm tolerance, which qualifies the system for high-end binary mask down to 0.5μm CD nominal. The feasibility to calibrate the system for 248nm Molybdenum Silicide Phase Shifting Masks is currently being investigated. In addition to that, the new measurement algorithms, the capability to take multiple measurements within the FOV, and the pattern recognition capability included in the NanoStar software gave a 75% throughput boost to the fully automated macros for the weekly calibration tests of the laser writing tools, compared to the LWM250UV run time. With little additional hardware and software, the system has also been upgraded to include the film thickness measurement capability for the PSM resist coating process (2nd exposure), without the need for a dedicated, more expensive

  20. Design and analysis of a piezoelectric material based touch screen with additional pressure and its acceleration measurement functions

    NASA Astrophysics Data System (ADS)

    Chu, Xiang-Cheng; Liu, Jia-Yi; Gao, Ren-Long; Chang, Jie; Li, Long-Tu

    2013-12-01

    Touch screens are becoming more and more prevalent in everyday environments due to their convenience and humanized operation. In this paper, a piezoelectric material based touch screen is developed and investigated. Piezoelectric ceramics arrayed under the touch panel at the edges or corners are used as tactile sensors to measure the touch positioning point similarly to conventional touch screens. However, additional touch pressure and its acceleration performance can also be obtained to obtain a higher-level human-machine interface. The piezoelectric ceramics can also be added to a traditional touch screen structure, or they can be used independently to construct a novel touch screen with a high light transmittance approach to a transparent glass. The piezoelectric ceramics were processed from PZT piezoelectric ceramic powder into a round or rectangular shape. According to the varied touch position and physical press strength of a finger, or even a gloved hand or fingernail, the piezoelectric tactile sensors will have different output voltage responses. By calculating the ratio of different piezoelectric tactile sensors’ responses and summing up all piezoelectric tactile sensors’ output voltages, the touch point position, touch pressure and touch force acceleration can be detected. A prototype of such a touch screen is manufactured and its position accuracy, touch pressure and response speed are measured in detail. The experimental results show that the prototype has many advantages such as high light transmittance, low energy cost and high durability.

  1. A joint resolution disapproving a rule submitted by the Environmental Protection Agency relating to the mitigation by States of cross-border air pollution under the Clean Air Act.

    THOMAS, 112th Congress

    Sen. Paul, Rand [R-KY

    2011-09-08

    11/10/2011 Motion to proceed to consideration of measure rejected in Senate by Yea-Nay Vote. 41 - 56. Record Vote Number: 201. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  2. Determination of antioxidant additives in foodstuffs by direct measurement of gold nanoparticle formation using resonance light scattering detection.

    PubMed

    Andreu-Navarro, A; Fernández-Romero, J M; Gómez-Hens, A

    2011-06-10

    The capability of antioxidant compounds to reduce gold(III) to gold nanoparticles has been kinetically studied in the presence of cetyltrimethylammonium bromide using stopped-flow mixing technique and resonance light scattering as detection system. This study has given rise to a simple and rapid method for the determination of several synthetic and natural antioxidants used as additives in foodstuff samples. The formation of AuNPs was monitored by measuring the initial reaction-rate of the system in about 5s, using an integration time of 0.1s. Dynamic ranges of the calibration graphs and detection limits, obtained with standard solutions of the analytes, were (μmolL⁻¹): gallic acid (0.04-0.59, 0.01), propyl gallate (0.04-1.41, 0.01), octyl gallate (0.03-0.35, 0.08), dodecyl gallate (0.02-0.30, 0.007), butylated hydroxyanisol (0.07-0.39, 0.009), butylated hydroxytoluene (0.04-0.32, 0.01), ascorbic acid (0.11-1.72, 0.03) and sodium citrate (0.07-1.29, 0.02). The regression coefficients were higher than 0.994 in all instances. The precision of the method, expressed as RSD%, was established at two concentration levels of each analyte, with values ranging between 0.6 and 4.8%. The practical usefulness of the developed method was demonstrated by the determination of several antioxidant additives in foodstuff samples, which were extracted, appropriately diluted and assayed, obtaining recoveries between 95.4 and 99.5%. The results obtained were validated using two reference methods. PMID:21601026

  3. A Comparative Study of Listening Comprehension Measures in English as an Additional Language and Native English-Speaking Primary School Children

    ERIC Educational Resources Information Center

    McKendry, Mairead Grainne; Murphy, Victoria A.

    2011-01-01

    The aim of this study was to investigate the suitability of different measures of listening comprehension for Years 2, 3 and 4 children with English as an additional language (EAL). Non-standardised uses of reading comprehension measures are often employed as proxy measures of listening comprehension, i.e. for purposes for which they were not…

  4. Crossing borders -- the global dimension of rust monitoring

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Rust pathogens are highly mobile trans-boundary organisms capable of rapid, long distance movements, either by wind-assisted or accidental human-mediated transmission. Emergence of new virulent races in one country can very rapidly have implications for other countries or regions. Detection of stem ...

  5. Stories of Crossing Borders: Identities, Place and Culture

    ERIC Educational Resources Information Center

    Margono Slamet, Yosep Bambang

    2013-01-01

    When international graduate students and their families participate in study abroad experiences, there are many challenges and opportunities that accompany these experiences. Depending on the context of the study abroad experience, some might be characterized as both opportunities and challenges. International graduate students and their families…

  6. Cultural Connections: A Model for Eliminating Boundaries and Crossing Borders.

    ERIC Educational Resources Information Center

    Cifuentes, Lauren; Murphy, Karen L.

    2000-01-01

    Explains Cultural Connections, a model for implementing constructivist, intercultural distance learning partnerships. Highlights include a theoretical framework; social constructivist pedagogy; intercultural communication; telecommunications; Web pages; and examples of a middle school partnership in Texas, a fourth-grade connection between Texas…

  7. Professional Development of Teacher Educators: A Cross Border Story

    ERIC Educational Resources Information Center

    Laws, Kevin; Harbon, Lesley; Nguyen, Nam; Trinh, Lap

    2009-01-01

    This paper presents the results of a collaborative project between the Faculty of Education and Social Work at the University of Sydney, Australia, and the School of Education at Can Tho University, Vietnam. The project aimed to develop a model for the professional development of teacher educators in the context of educational innovations in…

  8. Crossing Borders: Research in Comparative and International Education

    ERIC Educational Resources Information Center

    Foster, Jesse; Addy, Nii Antiyae; Samoff, Joel

    2012-01-01

    Published articles permit mapping international and comparative education research. We reviewed 605 articles published 2004-2008 in four major journals. Using title, abstract, and entire text we explored thematic focus, geographic focus, level/type of education studied, method, and funding. The economic, political, and social context of education…

  9. Achieving cross-border consistency during a nuclear emergency.

    PubMed

    Haywood, Stephanie; Majerus, Patrick

    2014-11-01

    The aim of the HERCA working group on emergencies (WGE) is to develop proposals to align decisions of European national crisis management organisations in a consistent manner during a nuclear emergency. The focus is to enhance the cooperation between the European organisations responsible for emergency radiological assessment, such as nuclear safety and radiological safety authorities, and their respective technical support organisations. A common understanding of a given emergency situation between those bodies will form the basis for consistent appropriate recommendations on protective actions and other response actions. The aim is to develop proposals which apply both to an accident within the boundaries of the HERCA member countries and also to a distant accident (such as Fukushima). PMID:24184142

  10. Reading Squadron: Crossing Borders in Literacy Experiences for Preservice Teachers

    ERIC Educational Resources Information Center

    Hudson, Suzanne; Dossel, Kylie; Hudson, Peter

    2009-01-01

    Teaching literacy requires accurate and current knowledge in the field (Commonwealth of Australia, 2005). There have been persistent inquiries into what constitutes specialist knowledge and skills for teaching students to be literate. Preservice teacher education is fundamental to literacy development, which includes the approaches universities…

  11. Folk Opera: Stories Crossing Borders in Papua New Guinea

    ERIC Educational Resources Information Center

    Haseman, B.; Baldwin, A.; Linthwaite, H.

    2014-01-01

    The Life Drama project is a drama-based sexual health promotion project, developed by a cross-cultural research team in Papua New Guinea (PNG) over the past four years. Recognising the limitations of established theatre-in-education and theatre-for-development approaches when working across cultures, the research team explored ways of tapping into…

  12. How Deep Is Your Commitment? Crossing Borders via Cultural Immersion

    ERIC Educational Resources Information Center

    Streets, Barbara Faye

    2011-01-01

    Cultural immersion experiences have been used in multicultural counselor training courses to address racism. Cultural immersion experiences include activities designed to provide concentrated, direct, substantial, and meaningful interactions with multiple elements of a target culture for the purpose of promoting crosscultural competency. In this…

  13. Cross-Border Student Collaborations: Opportunities for Videoconferencing

    ERIC Educational Resources Information Center

    Scovotti, Carol; Spiller, Lisa D.

    2011-01-01

    Globalization has prompted businesses to adopt burgeoning technologies that support the efforts of distributed teams. This project unites students from geographically dispersed master's-level programs on two continents. Using videoconferencing, virtual workspace, telephone, and e-mail, MBA students at a U.S. university teamed with students from…

  14. Crossing Borders: Contemporary Immigrant Stories in Historical Context

    ERIC Educational Resources Information Center

    Keiper, Timothy; Garcia, Jesus

    2009-01-01

    There is no country on Earth more populated by immigrants than the United States. Most U.S. residents (99 percent) have ancestors who were immigrants to this continent, whether they came voluntarily as travelers, or involuntarily as slaves. These immigrants have helped to shape the social and economic foundations of their adopted nation. According…

  15. Crossing Borders: The Arts Engage Academics and Inspire Children

    ERIC Educational Resources Information Center

    Zwirn, Susan Goetz; Graham, Mark

    2005-01-01

    The arts become a form of resistance, providing educators with a tool to resist mechanical and oppressive school experiences and cultivate a personal voice among children. Two professors on opposite coasts joined forces to design a course for pre- and inservice elementary school teachers. This article describes the course and discusses it's…

  16. Cross-Border Delivery in Nigeria and Quality Assurance Issues

    ERIC Educational Resources Information Center

    Idogho, Philipa Omamhe; Eshiotse, Sunday Gabriel

    2012-01-01

    Access to educational opportunities has witnessed significant facilitation, especially in developing economies where ethnic minorities and other disadvantaged groups abound. The global initiative anchored by COL (commonwealth of learning) in collaboration with institutions and agencies is helping to further reinforce the "global image" schema,…

  17. Crossing Borders, Breaking Boundaries: Collaboration among Higher Education Institutions

    ERIC Educational Resources Information Center

    Duffield, Stacy; Olson, Alan; Kerzman, Renee

    2013-01-01

    Partnerships and collaboration have become popular in higher education; and partnerships with community agencies, K-12 schools, and businesses are common. However, formal and sustained partnerships among institutions of higher education are not nearly as widespread. This article presents a model for collaboration in higher education focused on a…

  18. Cross-Border Trade Enhancement Act of 2012

    THOMAS, 112th Congress

    Sen. Cornyn, John [R-TX

    2012-06-07

    06/07/2012 Read twice and referred to the Committee on Homeland Security and Governmental Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  19. Crossing Borders and Building Bridges Using the Internet

    ERIC Educational Resources Information Center

    Risinger, C. Frederick

    2007-01-01

    Although there are many differences among the nations and cultures of the world, there are also many attributes, beliefs, and aspirations that are common to the world's peoples. Teachers can help their students gain perspective by using the Internet to implement a program for "pen pals"--or paired classrooms and partner schools. The Internet has…

  20. Direct measurement of additional Ar-H2O vibration-rotation-tunneling bands in the millimeter-submillimeter range

    NASA Astrophysics Data System (ADS)

    Zou, Luyao; Widicus Weaver, Susanna L.

    2016-06-01

    Three new weak bands of the Ar-H2O vibration-rotation-tunneling spectrum have been measured in the millimeter wavelength range. These bands were predicted from combination differences based on previously measured bands in the submillimeter region. Two previously reported submillimeter bands were also remeasured with higher frequency resolution. These new measurements allow us to obtain accurate information on the Coriolis interaction between the 101 and 110 states. Here we report these results and the associated improved molecular constants.

  1. A rapid automated procedure for laboratory and shipboard spectrophotometric measurements of seawater alkalinity: continuously monitored single-step acid additions

    NASA Astrophysics Data System (ADS)

    Liu, X.; Byrne, R. H.; Lindemuth, M.; Easley, R. A.; Patsavas, M. C.

    2012-12-01

    An automated system for shipboard and laboratory alkalinity measurements is presented. The simple system, which consists of a Dosimat titrator to deliver acid volumetrically and a USB 4000 spectrophotometer to monitor the titration progress, provides fast, precise and accurate measurements of total alkalinity for oceanographic research. The analytical method is based on single-point HCl titrations of seawater samples of a known volume; bromol cresol purple is used as an indicator to determine the final pH. Field data from an Arctic cruise demonstrates accuracy and precision around 1 micro mol/kg and a sample processing rate of 6 min per sample.

  2. Near-road modeling and measurement of cerium-containing particles generated by nanoparticle diesel fuel additive use

    EPA Science Inventory

    Cerium oxide nanoparticles (nCe) are used as a fuel-borne catalyst in diesel engines to reduce particulate emissions, yet the environmental and human health impacts of the exhaust particles are not well understood. To bridge the gap between emission measurements and ambient impac...

  3. Spectrally resolved and phase-sensitive far-field measurement for the coherent addition of laser pulses in a tiled grating compressor.

    PubMed

    Hornung, Marco; Bödefeld, Ragnar; Kessler, Alexander; Hein, Joachim; Kaluza, Malte C

    2010-06-15

    We describe a method that can be used for the coherent addition of laser pulses. As different laser pulses are initially generated in a laser-pulse compressor equipped with a tiled grating, such a coherent addition is indispensable in order to maximize the intensity in the laser far field. We present measurements in this context where, up to now, an unavoidable difference in the grating constants between the phased gratings reduced the maximum achievable intensity. The method significantly facilitates the high-precision alignment of a tiled grating compressor and could also be used for a coherent addition of laser pulses. PMID:20548390

  4. Food additives

    MedlinePlus

    Food additives are substances that become part of a food product when they are added during the processing or making of that food. "Direct" food additives are often added during processing to: Add nutrients ...

  5. The Additive Effects of Values Clarification Training to an Online Goal-Setting Procedure on Measures of Student Retention and Performance

    ERIC Educational Resources Information Center

    Chase, Jared A.

    2010-01-01

    The purpose of this study was to provide individuals with online tutorials to help participants generate strategies to achieve their academic goals and clarify their academic values to assess the additive effects of values clarification training to an online goal-setting training procedure on (1) measures of academic performance and (2) student…

  6. Food additives

    PubMed Central

    Spencer, Michael

    1974-01-01

    Food additives are discussed from the food technology point of view. The reasons for their use are summarized: (1) to protect food from chemical and microbiological attack; (2) to even out seasonal supplies; (3) to improve their eating quality; (4) to improve their nutritional value. The various types of food additives are considered, e.g. colours, flavours, emulsifiers, bread and flour additives, preservatives, and nutritional additives. The paper concludes with consideration of those circumstances in which the use of additives is (a) justified and (b) unjustified. PMID:4467857

  7. Additional Value of CH4 Measurement in a Combined 13C/H2 Lactose Malabsorption Breath Test: A Retrospective Analysis

    PubMed Central

    Houben, Els; De Preter, Vicky; Billen, Jaak; Van Ranst, Marc; Verbeke, Kristin

    2015-01-01

    The lactose hydrogen breath test is a commonly used, non-invasive method for the detection of lactose malabsorption and is based on an abnormal increase in breath hydrogen (H2) excretion after an oral dose of lactose. We use a combined 13C/H2 lactose breath test that measures breath 13CO2 as a measure of lactose digestion in addition to H2 and that has a better sensitivity and specificity than the standard test. The present retrospective study evaluated the results of 1051 13C/H2 lactose breath tests to assess the impact on the diagnostic accuracy of measuring breath CH4 in addition to H2 and 13CO2. Based on the 13C/H2 breath test, 314 patients were diagnosed with lactase deficiency, 138 with lactose malabsorption or small bowel bacterial overgrowth (SIBO), and 599 with normal lactose digestion. Additional measurement of CH4 further improved the accuracy of the test as 16% subjects with normal lactose digestion and no H2-excretion were found to excrete CH4. These subjects should have been classified as subjects with lactose malabsorption or SIBO. In conclusion, measuring CH4-concentrations has an added value to the 13C/H2 breath test to identify methanogenic subjects with lactose malabsorption or SIBO. PMID:26371034

  8. Food additives.

    PubMed

    Berglund, F

    1978-01-01

    The use of additives to food fulfils many purposes, as shown by the index issued by the Codex Committee on Food Additives: Acids, bases and salts; Preservatives, Antioxidants and antioxidant synergists; Anticaking agents; Colours; Emulfifiers; Thickening agents; Flour-treatment agents; Extraction solvents; Carrier solvents; Flavours (synthetic); Flavour enhancers; Non-nutritive sweeteners; Processing aids; Enzyme preparations. Many additives occur naturally in foods, but this does not exclude toxicity at higher levels. Some food additives are nutrients, or even essential nutritents, e.g. NaCl. Examples are known of food additives causing toxicity in man even when used according to regulations, e.g. cobalt in beer. In other instances, poisoning has been due to carry-over, e.g. by nitrate in cheese whey - when used for artificial feed for infants. Poisonings also occur as the result of the permitted substance being added at too high levels, by accident or carelessness, e.g. nitrite in fish. Finally, there are examples of hypersensitivity to food additives, e.g. to tartrazine and other food colours. The toxicological evaluation, based on animal feeding studies, may be complicated by impurities, e.g. orthotoluene-sulfonamide in saccharin; by transformation or disappearance of the additive in food processing in storage, e.g. bisulfite in raisins; by reaction products with food constituents, e.g. formation of ethylurethane from diethyl pyrocarbonate; by metabolic transformation products, e.g. formation in the gut of cyclohexylamine from cyclamate. Metabolic end products may differ in experimental animals and in man: guanylic acid and inosinic acid are metabolized to allantoin in the rat but to uric acid in man. The magnitude of the safety margin in man of the Acceptable Daily Intake (ADI) is not identical to the "safety factor" used when calculating the ADI. The symptoms of Chinese Restaurant Syndrome, although not hazardous, furthermore illustrate that the whole ADI

  9. Potlining Additives

    SciTech Connect

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  10. Phosphazene additives

    SciTech Connect

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  11. Contributions of 18 Additional DNA Sequence Variations in the Gene Encoding Apolipoprotein E to Explaining Variation in Quantitative Measures of Lipid Metabolism

    PubMed Central

    Stengård, Jari H.; Clark, Andrew G.; Weiss, Kenneth M.; Kardia, Sharon; Nickerson, Deborah A.; Salomaa, Veikko; Ehnholm, Christian; Boerwinkle, Eric; Sing, Charles F.

    2002-01-01

    Apolipoprotein E (ApoE) is a major constituent of many lipoprotein particles. Previous genetic studies have focused on six genotypes defined by three alleles, denoted ε2, ε3, and ε4, encoded by two variable exonic sites that segregate in most populations. We have reported studies of the distribution of alleles of 20 biallelic variable sites in the gene encoding the ApoE molecule within and among samples, ascertained without regard to health, from each of three populations: African Americans from Jackson, Miss.; Europeans from North Karelia, Finland; and non-Hispanic European Americans from Rochester, Minn. Here we ask (1) how much variation in blood levels of ApoE (lnApoE), of total cholesterol (TC), of high-density lipoprotein cholesterol (HDL-C), and of triglyceride (lnTG) is statistically explained by variation among APOE genotypes defined by the ε2, ε3, and ε4 alleles; (2) how much additional variation in these traits is explained by genotypes defined by combining the two variable sites that define these three alleles with one or more additional variable sites; and (3) what are the locations and relative allele frequencies of the sites that define multisite genotypes that significantly improve the statistical explanation of variation beyond that provided by the genotypes defined by the ε2, ε3, and ε4 alleles, separately for each of the six gender-population strata. This study establishes that the use of only genotypes defined by the ε2, ε3, and ε4 alleles gives an incomplete picture of the contribution that the variation in the APOE gene makes to the statistical explanation of interindividual variation in blood measurements of lipid metabolism. The addition of variable sites to the genotype definition significantly improved the ability to explain variation in lnApoE and in TC and resulted in the explanation of variation in HDL-C and in lnTG. The combination of additional sites that explained the greatest amount of trait variation was different for

  12. [Food additives and healthiness].

    PubMed

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects. PMID:24772784

  13. Addition of posttraumatic stress and sensory hypersensitivity more accurately estimates disability and pain than fear avoidance measures alone after whiplash injury.

    PubMed

    Pedler, Ashley; Kamper, Steven J; Sterling, Michele

    2016-08-01

    The fear avoidance model (FAM) has been proposed to explain the development of chronic disability in a variety of conditions including whiplash-associated disorders (WADs). The FAM does not account for symptoms of posttraumatic stress and sensory hypersensitivity, which are associated with poor recovery from whiplash injury. The aim of this study was to explore a model for the maintenance of pain and related disability in people with WAD including symptoms of PTSD, sensory hypersensitivity, and FAM components. The relationship between individual components in the model and disability and how these relationships changed over the first 12 weeks after injury were investigated. We performed a longitudinal study of 103 (74 female) patients with WAD. Measures of pain intensity, cold and mechanical pain thresholds, symptoms of posttraumatic stress, pain catastrophising, kinesiophobia, and fear of cervical spine movement were collected within 6 weeks of injury and at 12 weeks after injury. Mixed-model analysis using Neck Disability Index (NDI) scores and average 24-hour pain intensity as the dependent variables revealed that overall model fit was greatest when measures of fear of movement, posttraumatic stress, and sensory hypersensitivity were included. The interactive effects of time with catastrophising and time with fear of activity of the cervical spine were also included in the best model for disability. These results provide preliminary support for the addition of neurobiological and stress system components to the FAM to explain poor outcome in patients with WAD. PMID:27007066

  14. Southern Hemisphere Additional Ozonesondes (SHADOZ) 1998-2000 tropical ozone climatology 1. Comparison with Total Ozone Mapping Spectrometer (TOMS) and ground-based measurements

    NASA Astrophysics Data System (ADS)

    Thompson, Anne M.; Witte, Jacquelyn C.; McPeters, Richard D.; Oltmans, Samuel J.; Schmidlin, Francis J.; Logan, Jennifer A.; Fujiwara, Masatomo; Kirchhoff, Volker W. J. H.; Posny, FrançOise; Coetzee, Gert J. R.; Hoegger, Bruno; Kawakami, Shuji; Ogawa, Toshihiro; Johnson, Bryan J.; VöMel, Holger; Labow, Gordon

    2003-01-01

    A network of 10 southern hemisphere tropical and subtropical stations, designated the Southern Hemisphere Additional Ozonesondes (SHADOZ) project and established from operational sites, provided over 1000 ozone profiles during the period 1998-2000. Balloon-borne electrochemical concentration cell (ECC) ozonesondes, combined with standard radiosondes for pressure, temperature, and relative humidity measurements, collected profiles in the troposphere and lower to midstratosphere at: Ascension Island; Nairobi, Kenya; Irene, South Africa; Réunion Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristóbal, Galapagos; and Natal, Brazil. The archived data are available at: . In this paper, uncertainties and accuracies within the SHADOZ ozone data set are evaluated by analyzing: (1) imprecisions in profiles and in methods of extrapolating ozone above balloon burst; (2) comparisons of column-integrated total ozone from sondes with total ozone from the Earth-Probe/Total Ozone Mapping Spectrometer (TOMS) satellite and ground-based instruments; and (3) possible biases from station to station due to variations in ozonesonde characteristics. The key results are the following: (1) Ozonesonde precision is 5%. (2) Integrated total ozone column amounts from the sondes are usually to within 5% of independent measurements from ground-based instruments at five SHADOZ sites and overpass measurements from the TOMS satellite (version 7 data). (3) Systematic variations in TOMS-sonde offsets and in ground-based-sonde offsets from station to station reflect biases in sonde technique as well as in satellite retrieval. Discrepancies are present in both stratospheric and tropospheric ozone. (4) There is evidence for a zonal wave-one pattern in total and tropospheric ozone, but not in stratospheric ozone.

  15. Determination of fluorine and chlorine in geological materials by induction furnace pyrohydrolysis and standard-addition ion-selective electrode measurement.

    PubMed

    Rice, T D

    1988-03-01

    Fluorine and chlorine in geological materials are volatilized by pyrohydrolysis at about 1150 degrees in a stream of oxygen (1000 ml/min) plus steam in an induction furnace. The catalyst is a 7:2:1 mixture of silica gel, tungstic oxide and potassium dihydrogen phosphate. The sample/catalyst mixture is pyrohydrolysed in a re-usable alumina crucible (already containing four drops of 1 + 3 phosphoric acid) inserted in a silica-enclosed graphite crucible. The absorption solution is buffered at pH 6.5 and spiked with 1.6 mug of fluoride and 16 mug of chloride per g of solution, to ensure rapid and linear electrode response during subsequent standard-addition measurement. The simple plastic absorption vessel has 99.5% efficiency. The 3s limits of detection are 5-10 mug/g and 40-100 mug/g for fluorine and chlorine respectively. The procedure is unsuitable for determining chlorine in coal. PMID:18964490

  16. Application of the deletion/substitution/addition algorithm to selecting land use regression models for interpolating air pollution measurements in California

    NASA Astrophysics Data System (ADS)

    Beckerman, Bernardo S.; Jerrett, Michael; Martin, Randall V.; van Donkelaar, Aaron; Ross, Zev; Burnett, Richard T.

    2013-10-01

    Land use regression (LUR) models are widely employed in health studies to characterize chronic exposure to air pollution. The LUR is essentially an interpolation technique that employs the pollutant of interest as the dependent variable with proximate land use, traffic, and physical environmental variables used as independent predictors. Two major limitations with this method have not been addressed: (1) variable selection in the model building process, and (2) dealing with unbalanced repeated measures. In this paper, we address these issues with a modeling framework that implements the deletion/substitution/addition (DSA) machine learning algorithm that uses a generalized linear model to average over unbalanced temporal observations. Models were derived for fine particulate matter with aerodynamic diameter of 2.5 microns or less (PM2.5) and nitrogen dioxide (NO2) using monthly observations. We used 4119 observations at 108 sites and 15,301 observations at 138 sites for PM2.5 and NO2, respectively. We derived models with good predictive capacity (cross-validated-R2 values were 0.65 and 0.71 for PM2.5 and NO2, respectively). By addressing these two shortcomings in current approaches to LUR modeling, we have developed a framework that minimizes arbitrary decisions during the model selection process. We have also demonstrated how to integrate temporally unbalanced data in a theoretically sound manner. These developments could have widespread applicability for future LUR modeling efforts.

  17. Effects of water additions, chemical amendments, and plants on in situ measures of nutrient bioavailability in calcareous soils of southeastern Utah, USA

    USGS Publications Warehouse

    Miller, M.E.; Belnap, J.; Beatty, S.W.; Webb, B.L.

    2006-01-01

    We used ion-exchange resin bags to investigate effects of water additions, chemical amendments, and plant presence on in situ measures of nutrient bioavailability in conjunction with a study examining soil controls of ecosystem invasion by the exotic annual grass Bromus tectorum L. At five dryland sites in southeastern Utah, USA, resin bags were buried in experimental plots randomly assigned to combinations of two watering treatments (wet and dry), four chemical-amendment treatments (KCl, MgO, CaO, and no amendment), and four plant treatments (B. tectorum alone, the perennial bunchgrass Stipa hymenoides R. & S. alone, B. tectorum and S. hymenoides together, and no plants). Resin bags were initially buried in September 1997; replaced in January, April, and June 1998; and removed at the end of the study in October 1998. When averaged across watering treatments, plots receiving KCl applications had lower resin-bag NO 3- than plots receiving no chemical amendments during three of four measurement periods-probably due to NO 3- displacement from resin bags by Cl- ions. During the January-April period, KCl application in wet plots (but not dry plots) decreased resin-bag NH 4+ and increased resin-bag NO 3- . This interaction effect likely resulted from displacement of NH 4+ from resins by K+ ions, followed by nitrification and enhanced NO 3- capture by resin bags. In plots not receiving KCl applications, resin-bag NH 4+ was higher in wet plots than in dry plots during the same period. During the January-April period, resin-bag measures for carbonate-related ions HPO 42- , Ca2+, and Mn2+ tended to be greater in the presence of B. tectorum than in the absence of B. tectorum. This trend was evident only in wet plots where B. tectorum densities were much higher than in dry plots. We attribute this pattern to the mobilization of carbonate-associated ions by root exudates of B. tectorum. These findings indicate the importance of considering potential indirect effects of soil

  18. Estimation of aerosol optical depth and additional atmospheric parameters for the calculation of apparent reflectance from radiance measured by the Airborne Visible/Infrared Imaging Spectrometer

    NASA Technical Reports Server (NTRS)

    Green, Robert O.; Conel, James E.; Roberts, Dar A.

    1993-01-01

    The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) measures spatial images of the total upwelling spectral radiance from 400 to 2500 nm through 10 nm spectral channels. Quantitative research and application objectives for surface investigations require inversion of the measured radiance of surface reflectance or surface leaving radiance. To calculate apparent surface reflectance, estimates of atmospheric water vapor abundance, cirrus cloud effects, surface pressure elevation, and aerosol optical depth are required. Algorithms for the estimation of these atmospheric parameters from the AVIRIS data themselves are described. From these atmospheric parameters we show an example of the calculation of apparent surface reflectance from the AVIRIS-measured radiance using a radiative transfer code.

  19. Measured effects of retrofits -- a refrigerant oil additive and a condenser spray device -- on the cooling performance of a heat pump

    SciTech Connect

    Levins, W.P.; Sand, J.R.; Baxter, V.D.; Linkous, R.L.

    1996-05-01

    A 15-year old, 3-ton single package air-to-air heat pump was tested in laboratory environmental chambers simulating indoor and outdoor conditions. After documenting initial performance, the unit was retrofitted with a prototype condenser water-spray device and retested. Results at standard ARI cooling rating conditions (95 F outdoor dry bulb and 80/67 F indoor dry bulb/wet bulb temperatures) showed the capacity increased by about 7%, and the electric power demand dropped by about 8%, resulting in a steady-state EER increase of 17%. Suction and discharge pressures were reduced by 7 and 37 psi, respectively. A refrigerant oil additive formulated to enhance refrigerant-side heat transfer was added at a dose of one ounce per ton of rated capacity, and the unit was tested for several days at the same 95 F outdoor conditions and showed essentially no increase in capacity, and a slight 3% increase in steady-state EER. Adding more additive lowered the EER slightly. Suction and discharge pressures were essentially unchanged. The short-term testing showed that the condenser-spray device was effective in increasing the cooling capacity and lowering the electrical demand on an old and relatively inefficient heat pump, but the refrigerant additive had little effect on the cooling performance of the unit. Sprayer issues to be resolved include the effect of a sprayer on a new, high-efficiency air conditioner/heat pump, reliable long-term operation, and economics.

  20. DSPI strain measurement on an externally reinforced bending beam: A comparison of step-by-step addition and pixel shift correlation

    NASA Astrophysics Data System (ADS)

    Hack, Erwin; Schumacher, Ann

    2007-05-01

    A small-scale concrete beam reinforced with an adhesively bonded carbon fiber reinforced polymer (CFRP) plate was subjected to four-point bending. Finite element analyses (FEA) of the bending deformations were carried out to predict strain gradients near the end of the CFRP plate. In order to measure these strains, phase-stepping 3D-digital speckle pattern interferometry was employed. To avoid speckle decorrelation due to the inevitable rigid body motion of the specimen, the load was increased in small increments. Two evaluation schemes for the electronic speckle pattern interferometry phase maps are compared: summing up the measured displacement components load step-by-load step versus regain of the correlation by shifting the final image by an integer number of pixels. Measured strain values are evaluated using a polynomial fit to the measured in-plane displacements and are compared to the FE predicitions. It can be concluded that pixel shift correlation is preferable to summing up load steps for cases of large rigid body motion.

  1. 30 CFR 250.406 - What additional safety measures must I take when I conduct drilling operations on a platform that...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... when I conduct drilling operations on a platform that has producing wells or has other hydrocarbon flow... hydrocarbon flow? You must take the following safety measures when you conduct drilling operations on a platform with producing wells or that has other hydrocarbon flow: (a) You must install an...

  2. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  3. The limitations of tissue-oxygen measurement and positron emission tomography as additional methods for postoperative breast reconstruction free-flap monitoring.

    PubMed

    Schrey, Aleksi; Niemi, Tarja; Kinnunen, Ilpo; Minn, Heikki; Vahlberg, Tero; Kalliokoski, Kari; Suominen, Erkki; Grénman, Reidar; Aitasalo, Kalle

    2010-02-01

    Twelve patients who underwent breast reconstruction with a microvascular flap were monitored postoperatively with continuous partial tissue oxygenation (p(ti)O(2)) measurement. The regional blood flow (BF) of the entire flap was evaluated with positron emission tomography (PET) using oxygen-15-labelled water on the first postoperative (POP) morning to achieve data of the perfusion of the entire flap. A re-exploration was carried out if the p(ti)O(2) value remained lower than 15 mmHg for over 30 min. The mean p(ti)O(2) value of the flaps was 52.9+/-5.5 mmHg, whereas the mean BF values were 3.3+/-1.0 ml per 100 g min(-1). One false-positive result was detected by p(ti)O(2) measurement, resulting in an unnecessary re-exploration. Another re-operation suggested by the low p(ti)O(2) results was avoided due to the normal BF results assessed with PET. Totally, three flaps were re-explored. This prospective study suggests that continuous tissue-oxygen measurement with a polarographic needle probe is reliable for monitoring free breast flaps from one part of the flap, but assessing perfusion of the entire flap requires more complex monitoring methods, for example, PET. Clinical examination by experienced personnel remains important in free-breast-flap monitoring. PET could be useful in assessing free-flap perfusion in selected high-risk patients as an alternative to a re-operation when clinical examination and evaluation by other means are unreliable or present controversial results. PMID:19059818

  4. Broadband Screening for Interstellar Species: Additional Laboratory Measurements and Interstellar Detection of Ethanimine (CH3CHNH) in Sgr B2(N) Using GBT PRIMOS Survey Data

    NASA Astrophysics Data System (ADS)

    Loomis, Ryan; Zaleski, D.; Steber, A.; Neill, J.; Muckle, M. T.; Harris, B. J.; Seifert, N.; Pate, B.; Lattanzi, V.; Martinez, O.; McCarthy, M. C.; Remijan, A. J.

    2013-01-01

    As the availability of publicly accessible spectral line surveys from radio astronomy increases, new approaches to the identification of molecules in the interstellar medium are possible. We have performed reaction product screening measurements using broadband rotational spectroscopy to identify potential matches in the laboratory and radio astronomy spectra. A broadband spectrum of an electrical discharge of CH3CN and H2S contained several matches to unidentified features in the GBT PRIMOS Survey1 of Sgr B2(N) that did not have molecular assignments in the radio astronomy spectral catalogs. These transitions have been assigned to the E- and Z-isomers of ethanimine (CH3CHNH). The rotational spectrum of the E- and Z-isomers of CH3CHNH have been reported at mm-wave frequencies in 1980 by Lovas et al.2 and then in 1981 by Brown et al.3 The analysis of the rotational spectra of these two isomers has been extended to the microwave frequency region to verify the assignments from the GBT PRIMOS Survey. Combined fits over the range of 8 to 130GHz consisting of data from Lovas et al., broadband CP-FTMW measurements, and cavity double resonance measurements are presented for both isomers. Evidence for the detection of both isomers in Sgr B2(N) is shown along with a discussion of the method of their detection and a brief analysis of possible formation routes. 1. GBT PRIMOS Survey, http://www.cv.nrao.edu aremijan/PRIMOS 2. F.J. Lovas, R.D. Suenram, D.R. Johnson, F.O. Clark, E. Tiemann, J. Chem. Phys., 72, 4964-4972, (1980). 3. R.D. Brown, P.D. Godfrey, D.A. Winkler, Chem. Phys., 59, 243-247, (1981).

  5. Measurement of toverline{t} production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at √{s} = 8 {TeV}

    NASA Astrophysics Data System (ADS)

    Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; Knünz, V.; König, A.; Krammer, M.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rahbaran, B.; Rohringer, H.; Schieck, J.; Schöfbeck, R.; Strauss, J.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Cornelis, T.; de Wolf, E. A.; Janssen, X.; Knutsson, A.; Lauwers, J.; Luyckx, S.; van de Klundert, M.; van Haevermaet, H.; van Mechelen, P.; van Remortel, N.; van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; Daci, N.; de Bruyn, I.; Deroover, K.; Heracleous, N.; Keaveney, J.; Lowette, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; van Doninck, W.; van Mulders, P.; van Onsem, G. P.; van Parijs, I.; Barria, P.; Brun, H.; Caillol, C.; Clerbaux, B.; de Lentdecker, G.; Fasanella, G.; Favart, L.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Léonard, A.; Maerschalk, T.; Marinov, A.; Perniè, L.; Randle-Conde, A.; Reis, T.; Seva, T.; Vander Velde, C.; Yonamine, R.; Vanlaer, P.; Yonamine, R.; Zenoni, F.; Zhang, F.; Adler, V.; Beernaert, K.; Benucci, L.; Cimmino, A.; Crucy, S.; Dobur, D.; Fagot, A.; Garcia, G.; Gul, M.; McCartin, J.; Ocampo Rios, A. A.; Poyraz, D.; Ryckbosch, D.; Salva, S.; Sigamani, M.; Strobbe, N.; Tytgat, M.; van Driessche, W.; Yazgan, E.; Zaganidis, N.; Basegmez, S.; Beluffi, C.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; Ceard, L.; da Silveira, G. G.; Delaere, C.; Favart, D.; Forthomme, L.; Giammanco, A.; Hollar, J.; Jafari, A.; Jez, P.; Komm, M.; Lemaitre, V.; Mertens, A.; Musich, M.; Nuttens, C.; Perrini, L.; Pin, A.; Piotrzkowski, K.; Popov, A.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Beliy, N.; Hammad, G. H.; Júnior, W. L. Aldá; Alves, F. L.; Alves, G. A.; Brito, L.; Correa Martins Junior, M.; Hamer, M.; Hensel, C.; Mora Herrera, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; da Costa, E. M.; de Jesus Damiao, D.; de Oliveira Martins, C.; Fonseca de Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Matos Figueiredo, D.; Mundim, L.; Nogima, H.; Prado da Silva, W. L.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; de Souza Santos, A.; Dogra, S.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Cheng, T.; Du, R.; Jiang, C. H.; Plestina, R.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Zhang, H.; Asawatangtrakuldee, C.; Ban, Y.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; Gomez, J. P.; Gomez Moreno, B.; Sanabria, J. C.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Kadija, K.; Luetic, J.; Micanovic, S.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Bodlak, M.; Finger, M.; Finger, M.; El Sawy, M.; El-Khateeb, E.; Elkafrawy, T.; Mohamed, A.; Salama, E.; Calpas, B.; Kadastik, M.; Murumaa, M.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Peltola, T.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J. L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Zghiche, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Dahms, T.; Davignon, O.; Filipovic, N.; Florent, A.; Granier de Cassagnac, R.; Lisniak, S.; Mastrolorenzo, L.; Miné, P.; Naranjo, I. N.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sauvan, J. B.; Sirois, Y.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.

    2016-07-01

    Jet multiplicity distributions in top quark pair ({t}{overline{t}}) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 {fb}^ {-1}. The measurement is performed in the dilepton decay channels (e^+e^-, μ^+ μ^-, and e^{±} μ^{∓}). The absolute and normalized differential cross sections for {t}overline{t} production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential {t overline{t} b} and {t overline{t} b overline{b}} cross sections are presented for the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. The data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading order calculation.

  6. Measurements of fiducial cross-sections for tbar{t} production with one or two additional b-jets in pp collisions at √{s}=8 TeV using the ATLAS detector

    NASA Astrophysics Data System (ADS)

    Aad, G.; Abbott, B.; Abdallah, J.; Abdinov, O.; Aben, R.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Abreu, R.; Abulaiti, Y.; Acharya, B. S.; Adamczyk, L.; Adams, D. L.; Adelman, J.; Adomeit, S.; Adye, T.; Affolder, A. A.; Agatonovic-Jovin, T.; Agricola, J.; Aguilar-Saavedra, J. A.; Ahlen, S. P.; Ahmadov, F.; Aielli, G.; Akerstedt, H.; Åkesson, T. P. A.; Akimov, A. V.; Alberghi, G. L.; Albert, J.; Albrand, S.; Alconada Verzini, M. J.; Aleksa, M.; Aleksandrov, I. N.; Alexa, C.; Alexander, G.; Alexopoulos, T.; Alhroob, M.; Alimonti, G.; Alio, L.; Alison, J.; Alkire, S. P.; Allbrooke, B. M. M.; Allport, P. P.; Aloisio, A.; Alonso, A.; Alonso, F.; Alpigiani, C.; Altheimer, A.; Alvarez Gonzalez, B.; Álvarez Piqueras, D.; Alviggi, M. G.; Amadio, B. T.; Amako, K.; Amaral Coutinho, Y.; Amelung, C.; Amidei, D.; Amor Dos Santos, S. P.; Amorim, A.; Amoroso, S.; Amram, N.; Amundsen, G.; Anastopoulos, C.; Ancu, L. S.; Andari, N.; Andeen, T.; Anders, C. F.; Anders, G.; Anders, J. K.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Angelidakis, S.; Angelozzi, I.; Anger, P.; Angerami, A.; Anghinolfi, F.; Anisenkov, A. V.; Anjos, N.; Annovi, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoki, M.; Aperio Bella, L.; Arabidze, G.; Arai, Y.; Araque, J. P.; Arce, A. T. H.; Arduh, F. A.; Arguin, J.-F.; Argyropoulos, S.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnold, H.; Arratia, M.; Arslan, O.; Artamonov, A.; Artoni, G.; Asai, S.; Asbah, N.; Ashkenazi, A.; Åsman, B.; Asquith, L.; Assamagan, K.; Astalos, R.; Atkinson, M.; Atlay, N. B.; Augsten, K.; Aurousseau, M.; Avolio, G.; Axen, B.; Ayoub, M. K.; Azuelos, G.; Baak, M. A.; Baas, A. E.; Baca, M. J.; Bacci, C.; Bachacou, H.; Bachas, K.; Backes, M.; Backhaus, M.; Bagiacchi, P.; Bagnaia, P.; Bai, Y.; Bain, T.; Baines, J. T.; Baker, O. K.; Baldin, E. M.; Balek, P.; Balestri, T.; Balli, F.; Balunas, W. K.; Banas, E.; Banerjee, Sw.; Bannoura, A. A. E.; Barak, L.; Barberio, E. L.; Barberis, D.; Barbero, M.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnes, S. L.; Barnett, B. M.; Barnett, R. M.; Barnovska, Z.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Bartoldus, R.; Barton, A. E.; Bartos, P.; Basalaev, A.; Bassalat, A.; Basye, A.; Bates, R. L.; Batista, S. J.; Batley, J. R.; Battaglia, M.; Bauce, M.; Bauer, F.; Bawa, H. S.; Beacham, J. B.; Beattie, M. D.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Becker, K.; Becker, M.; Beckingham, M.; Becot, C.; Beddall, A. J.; Beddall, A.; Bednyakov, V. A.; Bee, C. P.; Beemster, L. J.; Beermann, T. A.; Begel, M.; Behr, J. K.; Belanger-Champagne, C.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellerive, A.; Bellomo, M.; Belotskiy, K.; Beltramello, O.; Benary, O.; Benchekroun, D.; Bender, M.; Bendtz, K.; Benekos, N.; Benhammou, Y.; Benhar Noccioli, E.; Benitez Garcia, J. A.; Benjamin, D. P.; Bensinger, J. R.; Bentvelsen, S.; Beresford, L.; Beretta, M.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Beringer, J.; Bernard, C.; Bernard, N. R.; Bernius, C.; Bernlochner, F. U.; Berry, T.; Berta, P.; Bertella, C.; Bertoli, G.; Bertolucci, F.; Bertsche, C.; Bertsche, D.; Besana, M. I.; Besjes, G. J.; Bessidskaia Bylund, O.; Bessner, M.; Besson, N.; Betancourt, C.; Bethke, S.; Bevan, A. J.; Bhimji, W.; Bianchi, R. M.; Bianchini, L.; Bianco, M.; Biebel, O.; Biedermann, D.; Bieniek, S. P.; Biglietti, M.; Bilbao De Mendizabal, J.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biondi, S.; Bjergaard, D. M.; Black, C. W.; Black, J. E.; Black, K. M.; Blackburn, D.; Blair, R. E.; Blanchard, J.-B.; Blanco, J. E.; Blazek, T.; Bloch, I.; Blocker, C.; Blum, W.; Blumenschein, U.; Blunier, S.; Bobbink, G. J.; Bobrovnikov, V. S.; Bocchetta, S. S.; Bocci, A.; Bock, C.; Boehler, M.; Bogaerts, J. A.; Bogavac, D.; Bogdanchikov, A. G.; Bohm, C.; Boisvert, V.; Bold, T.; Boldea, V.; Boldyrev, A. S.; Bomben, M.; Bona, M.; Boonekamp, M.; Borisov, A.; Borissov, G.; Borroni, S.; Bortfeldt, J.; Bortolotto, V.; Bos, K.; Boscherini, D.; Bosman, M.; Boudreau, J.; Bouffard, J.; Bouhova-Thacker, E. V.; Boumediene, D.; Bourdarios, C.; Bousson, N.; Boutle, S. K.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozic, I.; Bracinik, J.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Breaden Madden, W. D.; Brendlinger, K.; Brennan, A. J.; Brenner, L.; Brenner, R.; Bressler, S.; Bristow, K.; Bristow, T. M.; Britton, D.; Britzger, D.; Brochu, F. M.; Brock, I.; Brock, R.; Bronner, J.; Brooijmans, G.; Brooks, T.; Brooks, W. K.; Brosamer, J.; Brost, E.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Bruni, A.; Bruni, G.; Bruschi, M.; Bruscino, N.; Bryngemark, L.; Buanes, T.; Buat, Q.; Buchholz, P.

    2016-01-01

    Fiducial cross-sections for tbar{t} production with one or two additional b-jets are reported, using an integrated luminosity of 20.3 fb^{-1} of proton-proton collisions at a centre-of-mass energy of 8 TeV at the Large Hadron Collider, collected with the ATLAS detector. The cross-section times branching ratio for tbar{t} events with at least one additional b-jet is measured to be 950 ± 70 (stat.) ^{+240}_{-190} (syst.) fb in the lepton-plus-jets channel and 50 ± 10 (stat.) ^{+15}_{-10} (syst.) fb in the e μ channel. The cross-section times branching ratio for events with at least two additional b-jets is measured to be 19.3 ± 3.5 (stat.) ± 5.7 (syst.) fb in the dilepton channel (e μ , μ μ , and ee) using a method based on tight selection criteria, and 13.5 ± 3.3 (stat.) ± 3.6 (syst.) fb using a looser selection that allows the background normalisation to be extracted from data. The latter method also measures a value of 1.30 ± 0.33 (stat.) ± 0.28 (syst.)% for the ratio of tbar{t} production with two additional b-jets to tbar{t} production with any two additional jets. All measurements are in good agreement with recent theory predictions.

  7. Measurement of $\\mathrm{ t \\bar{t} } $ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at $\\sqrt{s} =$ 8 TeV

    SciTech Connect

    Khachatryan, Vardan

    2015-10-13

    Jet multiplicity distributions in top quark pair (tt) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 fb-1. The measurement is performed in the dilepton decay channels (e+e-+μ- and e±μ). Furthermore, the absolute and normalized differential cross sections for tt production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential tt-b and tt-bb- cross sections are presented for the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. Finally, the data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading ordercalculation.

  8. Measurement of $$\\mathrm{ t \\bar{t} } $$ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at $$\\sqrt{s} =$$ 8 TeV

    DOE PAGESBeta

    Khachatryan, Vardan

    2016-07-07

    Jet multiplicity distributions in top quark pair (tt) events are measured in pp collisions at a centre-of-mass energy of 8 TeV with the CMS detector at the LHC using a data set corresponding to an integrated luminosity of 19.7 fb-1. The measurement is performed in the dilepton decay channels (e+e-,μ+μ- and e±μ∓). Furthermore, the absolute and normalized differential cross sections for tt production are measured as a function of the jet multiplicity in the event for different jet transverse momentum thresholds and the kinematic properties of the leading additional jets. The differential tt-b and tt-bb- cross sections are presented formore » the first time as a function of the kinematic properties of the leading additional b jets. Furthermore, the fraction of events without additional jets above a threshold is measured as a function of the transverse momenta of the leading additional jets and the scalar sum of the transverse momenta of all additional jets. Finally, the data are compared and found to be consistent with predictions from several perturbative quantum chromodynamics event generators and a next-to-leading ordercalculation.« less

  9. Additive and epistatic genome-wide association for growth and ultrasound scan measures of carcass-related traits in Brahman cattle.

    PubMed

    Ali, A A; Khatkar, M S; Kadarmideen, H N; Thomson, P C

    2015-04-01

    Genome-wide association studies are routinely used to identify genomic regions associated with traits of interest. However, this ignores an important class of genomic associations, that of epistatic interactions. A genome-wide interaction analysis between single nucleotide polymorphisms (SNPs) using highly dense markers can detect epistatic interactions, but is a difficult task due to multiple testing and computational demand. However, It is important for revealing complex trait heredity. This study considers analytical methods that detect statistical interactions between pairs of loci. We investigated a three-stage modelling procedure: (i) a model without the SNP to estimate the variance components; (ii) a model with the SNP using variance component estimates from (i), thus avoiding iteration; and (iii) using the significant SNPs from (ii) for genome-wide epistasis analysis. We fitted these three-stage models to field data for growth and ultrasound measures for subcutaneous fat thickness in Brahman cattle. The study demonstrated the usefulness of modelling epistasis in the analysis of complex traits as it revealed extra sources of genetic variation and identified potential candidate genes affecting the concentration of insulin-like growth factor-1 and ultrasound scan measure of fat depth traits. Information about epistasis can add to our understanding of the complex genetic networks that form the fundamental basis of biological systems. PMID:25754883

  10. Measurement of dijet production with a veto on additional central jet activity in pp collisions at sqrt {s} = 7 TeV using the ATLAS detector

    NASA Astrophysics Data System (ADS)

    Aad, G.; Abbott, B.; Abdallah, J.; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; Abramowicz, H.; Abreu, H.; Acerbi, E.; Acharya, B. S.; Adams, D. L.; Addy, T. N.; Adelman, J.; Aderholz, M.; Adomeit, S.; Adragna, P.; Adye, T.; Aefsky, S.; Aguilar-Saavedra, J. A.; Aharrouche, M.; Ahlen, S. P.; Ahles, F.; Ahmad, A.; Ahsan, M.; Aielli, G.; Akdogan, T.; Åkesson, T. P. A.; Akimoto, G.; Akimov, A. V.; Akiyama, A.; Alam, M. S.; Alam, M. A.; Albert, J.; Albrand, S.; Aleksa, M.; Aleksandrov, I. N.; Alessandria, F.; Alexa, C.; Alexander, G.; Alexandre, G.; Alexopoulos, T.; Alhroob, M.; Aliev, M.; Alimonti, G.; Alison, J.; Aliyev, M.; Allport, P. P.; Allwood-Spiers, S. E.; Almond, J.; Aloisio, A.; Alon, R.; Alonso, A.; Alviggi, M. G.; Amako, K.; Amaral, P.; Amelung, C.; Ammosov, V. V.; Amorim, A.; Amorós, G.; Amram, N.; Anastopoulos, C.; Ancu, L. S.; Andari, N.; Andeen, T.; Anders, C. F.; Anders, G.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Andrieux, M.-L.; Anduaga, X. S.; Angerami, A.; Anghinolfi, F.; Anjos, N.; Annovi, A.; Antonaki, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoun, S.; Aperio Bella, L.; Apolle, R.; Arabidze, G.; Aracena, I.; Arai, Y.; Arce, A. T. H.; Archambault, J. P.; Arfaoui, S.; Arguin, J.-F.; Arik, E.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnault, C.; Artamonov, A.; Artoni, G.; Arutinov, D.; Asai, S.; Asfandiyarov, R.; Ask, S.; Åsman, B.; Asquith, L.; Assamagan, K.; Astbury, A.; Astvatsatourov, A.; Atoian, G.; Aubert, B.; Auerbach, B.; Auge, E.; Augsten, K.; Aurousseau, M.; Austin, N.; Avolio, G.; Avramidou, R.; Axen, D.; Ay, C.; Azuelos, G.; Azuma, Y.; Baak, M. A.; Baccaglioni, G.; Bacci, C.; Bach, A. M.; Bachacou, H.; Bachas, K.; Bachy, G.; Backes, M.; Backhaus, M.; Badescu, E.; Bagnaia, P.; Bahinipati, S.; Bai, Y.; Bailey, D. C.; Bain, T.; Baines, J. T.; Baker, O. K.; Baker, M. D.; Baker, S.; Banas, E.; Banerjee, P.; Banerjee, Sw.; Banfi, D.; Bangert, A.; Bansal, V.; Bansil, H. S.; Barak, L.; Baranov, S. P.; Barashkou, A.; Galtieri, A. Barbaro; Barber, T.; Barberio, E. L.; Barberis, D.; Barbero, M.; Bardin, D. Y.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnett, B. M.; Barnett, R. M.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Barrillon, P.; Bartoldus, R.; Barton, A. E.; Bartsch, D.; Bartsch, V.; Bates, R. L.; Batkova, L.; Batley, J. R.; Battaglia, A.; Battistin, M.; Battistoni, G.; Bauer, F.; Bawa, H. S.; Beare, B.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Beckingham, M.; Becks, K. H.; Beddall, A. J.; Beddall, A.; Bedikian, S.; Bednyakov, V. A.; Bee, C. P.; Begel, M.; Harpaz, S. Behar; Behera, P. K.; Beimforde, M.; Belanger-Champagne, C.; Bell, P. J.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellina, F.; Bellomo, M.; Belloni, A.; Beloborodova, O.; Belotskiy, K.; Beltramello, O.; Ami, S. Ben; Benary, O.; Benchekroun, D.; Benchouk, C.; Bendel, M.; Benedict, B. H.; Benekos, N.; Benhammou, Y.; Benjamin, D. P.; Benoit, M.; Bensinger, J. R.; Benslama, K.; Bentvelsen, S.; Berge, D.; Kuutmann, E. Bergeaas; Berger, N.; Berghaus, F.; Berglund, E.; Beringer, J.; Bernardet, K.; Bernat, P.; Bernhard, R.; Bernius, C.; Berry, T.; Bertin, A.; Bertinelli, F.; Bertolucci, F.; Besana, M. I.; Besson, N.; Bethke, S.; Bhimji, W.; Bianchi, R. M.; Bianco, M.; Biebel, O.; Bieniek, S. P.; Bierwagen, K.; Biesiada, J.; Biglietti, M.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biscarat, C.; Bitenc, U.; Black, K. M.; Blair, R. E.; Blanchard, J.-B.; Blanchot, G.; Blazek, T.; Blocker, C.; Blocki, J.; Blondel, A.; Blum, W.; Blumenschein, U.; Bobbink, G. J.; Bobrovnikov, V. B.; Bocchetta, S. S.; Bocci, A.; Boddy, C. R.; Boehler, M.; Boek, J.; Boelaert, N.; Böser, S.; Bogaerts, J. A.; Bogdanchikov, A.; Bogouch, A.; Bohm, C.; Boisvert, V.; Bold, T.; Boldea, V.; Bolnet, N. M.; Bona, M.; Bondarenko, V. G.; Boonekamp, M.; Boorman, G.; Booth, C. N.; Bordoni, S.; Borer, C.; Borisov, A.; Borissov, G.; Borjanovic, I.; Borroni, S.; Bos, K.; Boscherini, D.; Bosman, M.; Boterenbrood, H.; Botterill, D.; Bouchami, J.; Boudreau, J.; Bouhova-Thacker, E. V.; Boulahouache, C.; Bourdarios, C.; Bousson, N.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozhko, N. I.; Bozovic-Jelisavcic, I.; Bracinik, J.; Braem, A.; Branchini, P.; Brandenburg, G. W.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Brelier, B.; Bremer, J.; Brenner, R.; Bressler, S.; Breton, D.; Britton, D.; Brochu, F. M.; Brock, I.; Brock, R.; Brodbeck, T. J.; Brodet, E.; Broggi, F.; Bromberg, C.; Brooijmans, G.; Brooks, W. K.; Brown, G.; Brown, H.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Brunet, S.; Bruni, A.; Bruni, G.; Bruschi, M.; Buanes, T.; Bucci, F.; Buchanan, J.; Buchanan, N. J.; Buchholz, P.; Buckingham, R. M.; Buckley, A. G.; Buda, S. I.; Budagov, I. A.; Budick, B.; Büscher, V.; Bugge, L.; Buira-Clark, D.; Bulekov, O.; Bunse, M.; Buran, T.; Burckhart, H.; Burdin, S.; Burgess, T.; Burke, S.; Busato, E.; Bussey, P.; Buszello, C. P.; Butin, F.; Butler, B.; Butler, J. M.; Buttar, C. M.; Butterworth, J. M.; Buttinger, W.; Byatt, T.; Cabrera Urbán, S.; Caforio, D.; Cakir, O.; Calafiura, P.; Calderini, G.; Calfayan, P.; Calkins, R.; Caloba, L. P.; Caloi, R.; Calvet, D.; Calvet, S.; Toro, R. Camacho; Camarri, P.; Cambiaghi, M.; Cameron, D.; Campana, S.; Campanelli, M.; Canale, V.; Canelli, F.; Canepa, A.; Cantero, J.; Capasso, L.; Capeans Garrido, M. D. M.; Caprini, I.; Caprini, M.; Capriotti, D.; Capua, M.; Caputo, R.; Caramarcu, C.; Cardarelli, R.; Carli, T.; Carlino, G.; Carminati, L.; Caron, B.; Caron, S.; Carrillo Montoya, G. D.; Carter, A. A.; Carter, J. R.; Carvalho, J.; Casadei, D.; Casado, M. P.; Cascella, M.; Caso, C.; Hernandez, A. M. Castaneda; Castaneda-Miranda, E.; Gimenez, V. Castillo; Castro, N. F.; Cataldi, G.; Cataneo, F.; Catinaccio, A.; Catmore, J. R.; Cattai, A.; Cattani, G.; Caughron, S.; Cauz, D.; Cavalleri, P.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerqueira, A. S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cetin, S. A.; Cevenini, F.; Chafaq, A.; Chakraborty, D.; Chan, K.; Chapleau, B.; Chapman, J. D.; Chapman, J. W.; Chareyre, E.; Charlton, D. G.; Chavda, V.; Barajas, C. A. Chavez; Cheatham, S.; Chekanov, S.; Chekulaev, S. V.; Chelkov, G. A.; Chelstowska, M. A.; Chen, C.; Chen, H.; Chen, S.; Chen, T.; Chen, X.; Cheng, S.; Cheplakov, A.; Chepurnov, V. F.; El Moursli, R. Cherkaoui; Chernyatin, V.; Cheu, E.; Cheung, S. L.; Chevalier, L.; Chiefari, G.; Chikovani, L.; Childers, J. T.; Chilingarov, A.; Chiodini, G.; Chizhov, M. V.; Choudalakis, G.; Chouridou, S.; Christidi, I. A.; Christov, A.; Chromek-Burckhart, D.; Chu, M. L.; Chudoba, J.; Ciapetti, G.; Ciba, K.; Ciftci, A. K.; Ciftci, R.; Cinca, D.; Cindro, V.; Ciobotaru, M. D.; Ciocca, C.; Ciocio, A.; Cirilli, M.; Ciubancan, M.; Clark, A.; Clark, P. J.; Cleland, W.; Clemens, J. C.; Clement, B.; Clement, C.; Clifft, R. W.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coe, P.; Cogan, J. G.; Coggeshall, J.; Cogneras, E.; Cojocaru, C. D.; Colas, J.; Colijn, A. P.; Collard, C.; Collins, N. J.; Collins-Tooth, C.; Collot, J.; Colon, G.; Muiño, P. Conde; Coniavitis, E.; Conidi, M. C.; Consonni, M.; Consorti, V.; Constantinescu, S.; Conta, C.; Conventi, F.; Cook, J.; Cooke, M.; Cooper, B. D.; Cooper-Sarkar, A. M.; Cooper-Smith, N. J.; Copic, K.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M. J.; Costanzo, D.; Costin, T.; Cˆoté, D.; Torres, R. Coura; Courneyea, L.; Cowan, G.; Cowden, C.; Cox, B. E.; Cranmer, K.; Crescioli, F.; Cristinziani, M.; Crosetti, G.; Crupi, R.; Crépé-Renaudin, S.; Cuciuc, C.-M.; Almenar, C. Cuenca; Donszelmann, T. Cuhadar; Curatolo, M.; Curtis, C. J.; Cwetanski, P.; Czirr, H.; Czyczula, Z.; D'Auria, S.; D'Onofrio, M.; D'Orazio, A.; Da Silva, P. V. M.; Da Via, C.; Dabrowski, W.; Dai, T.; Dallapiccola, C.; Dam, M.; Dameri, M.; Damiani, D. S.; Danielsson, H. O.; Dannheim, D.; Dao, V.; Darbo, G.; Darlea, G. L.; Daum, C.; Dauvergne, J. P.; Davey, W.; Davidek, T.; Davidson, N.; Davidson, R.; Davies, E.; Davies, M.; Davison, A. R.; Davygora, Y.; Dawe, E.; Dawson, I.; Dawson, J. W.; Daya, R. K.; De, K.; de Asmundis, R.; De Castro, S.; De Castro Faria Salgado, P. E.; De Cecco, S.; de Graat, J.; De Groot, N.; de Jong, P.; De La Taille, C.; De la Torre, H.; De Lotto, B.; De Mora, L.; De Nooij, L.; De Oliveira Branco, M.; De Pedis, D.; De Salvo, A.; De Sanctis, U.; De Santo, A.; De Vivie De Regie, J. B.; Dean, S.; Dedovich, D. V.; Degenhardt, J.; Dehchar, M.; Del Papa, C.; Del Peso, J.; Del Prete, T.; Deliyergiyev, M.; Dell'Acqua, A.; Dell'Asta, L.; Pietra, M. Della; della Volpe, D.; Delmastro, M.; Delpierre, P.; Delruelle, N.; Delsart, P. A.; Deluca, C.; Demers, S.; Demichev, M.; Demirkoz, B.; Deng, J.; Denisov, S. P.; Derendarz, D.; Derkaoui, J. E.; Derue, F.; Dervan, P.; Desch, K.; Devetak, E.; Deviveiros, P. O.; Dewhurst, A.; DeWilde, B.; Dhaliwal, S.; Dhullipudi, R.; Di Ciaccio, A.; Di Ciaccio, L.; Di Girolamo, A.; Di Girolamo, B.; Di Luise, S.; Di Mattia, A.; Di Micco, B.; Di Nardo, R.; Di Simone, A.; Di Sipio, R.; Diaz, M. A.; Diblen, F.; Diehl, E. B.; Dietrich, J.; Dietzsch, T. A.; Diglio, S.; Yagci, K. Dindar; Dingfelder, J.; Dionisi, C.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djobava, T.; do Vale, M. A. B.; Do Valle Wemans, A.; Doan, T. K. O.; Dobbs, M.; Dobinson, R.; Dobos, D.; Dobson, E.; Dobson, M.; Dodd, J.; Doglioni, C.; Doherty, T.; Doi, Y.; Dolejsi, J.; Dolenc, I.; Dolezal, Z.; Dolgoshein, B. A.; Dohmae, T.; Donadelli, M.; Donega, M.; Donini, J.; Dopke, J.; Doria, A.; Dos Anjos, A.; Dosil, M.; Dotti, A.; Dova, M. T.; Dowell, J. D.; Doxiadis, A. D.; Doyle, A. T.; Drasal, Z.; Drees, J.; Dressnandt, N.; Drevermann, H.; Driouichi, C.; Dris, M.; Dubbert, J.; Dubbs, T.; Dube, S.; Duchovni, E.; Duckeck, G.; Dudarev, A.; Dudziak, F.; Dührssen, M.; Duerdoth, I. P.; Duflot, L.; Dufour, M.-A.; Dunford, M.; Duran Yildiz, H.; Duxfield, R.; Dwuznik, M.; Dydak, F.; Dzahini, D.; Düren, M.; Ebenstein, W. L.; Ebke, J.; Eckert, S.; Eckweiler, S.; Edmonds, K.; Edwards, C. A.; Edwards, N. C.; Ehrenfeld, W.; Ehrich, T.; Eifert, T.; Eigen, G.; Einsweiler, K.; Eisenhandler, E.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Ellis, K.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Ely, R.; Emeliyanov, D.; Engelmann, R.; Engl, A.; Epp, B.; Eppig, A.; Erdmann, J.; Ereditato, A.; Eriksson, D.; Ernst, J.; Ernst, M.; Ernwein, J.; Errede, D.; Errede, S.; Ertel, E.; Escalier, M.; Escobar, C.; Espinal Curull, X.; Esposito, B.; Etienne, F.; Etienvre, A. I.; Etzion, E.; Evangelakou, D.; Evans, H.; Fabbri, L.; Fabre, C.; Fakhrutdinov, R. M.; Falciano, S.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farley, J.; Farooque, T.; Farrington, S. M.; Farthouat, P.; Fassnacht, P.; Fassouliotis, D.; Fatholahzadeh, B.; Favareto, A.; Fayard, L.; Fazio, S.; Febbraro, R.; Federic, P.; Fedin, O. L.; Fedorko, W.; Fehling-Kaschek, M.; Feligioni, L.; Fellmann, D.; Felzmann, C. U.; Feng, C.; Feng, E. J.; Fenyuk, A. B.; Ferencei, J.; Ferland, J.; Fernando, W.; Ferrag, S.; Ferrando, J.; Ferrara, V.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferrer, A.; Ferrer, M. L.; Ferrere, D.; Ferretti, C.; Ferretto Parodi, A.; Fiascaris, M.; Fiedler, F.; Filipčič, A.; Filippas, A.; Filthaut, F.; Fincke-Keeler, M.; Fiolhais, M. C. N.; Fiorini, L.; Firan, A.; Fischer, G.; Fischer, P.; Fisher, M. J.; Fisher, S. M.; Flechl, M.; Fleck, I.; Fleckner, J.; Fleischmann, P.; Fleischmann, S.; Flick, T.; Flores Castillo, L. R.; Flowerdew, M. J.; Föhlisch, F.; Fokitis, M.; Martin, T. Fonseca; Forbush, D. A.; Formica, A.; Forti, A.; Fortin, D.; Foster, J. M.; Fournier, D.; Foussat, A.; Fowler, A. J.; Fowler, K.; Fox, H.; Francavilla, P.; Franchino, S.; Francis, D.; Frank, T.; Franklin, M.; Franz, S.; Fraternali, M.; Fratina, S.; French, S. T.; Friedrich, F.; Froeschl, R.; Froidevaux, D.; Frost, J. A.; Fukunaga, C.; Fullana Torregrosa, E.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gadfort, T.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Gallas, E. J.; Gallas, M. V.; Gallo, V.; Gallop, B. J.; Gallus, P.; Galyaev, E.; Gan, K. K.; Gao, Y. S.; Gapienko, V. A.; Gaponenko, A.; Garberson, F.; Garcia-Sciveres, M.; García, C.; García Navarro, J. E.; Gardner, R. W.; Garelli, N.; Garitaonandia, H.; Garonne, V.; Garvey, J.; Gatti, C.; Gaudio, G.; Gaumer, O.; Gaur, B.; Gauthier, L.; Gavrilenko, I. L.; Gay, C.; Gaycken, G.; Gayde, J.-C.; Gazis, E. N.; Ge, P.; Gee, C. N. P.; Geerts, D. A. A.; Geich-Gimbel, Ch.; Gellerstedt, K.; Gemme, C.; Gemmell, A.; Genest, M. H.; Gentile, S.; George, M.; George, S.; Gerlach, P.; Gershon, A.; Geweniger, C.; Ghazlane, H.; Ghez, P.; Ghodbane, N.; Giacobbe, B.; Giagu, S.; Giakoumopoulou, V.; Giangiobbe, V.; Gianotti, F.; Gibbard, B.; Gibson, A.; Gibson, S. M.; Gilbert, L. M.; Gilchriese, M.; Gilewsky, V.; Gillberg, D.; Gillman, A. R.; Gingrich, D. M.; Ginzburg, J.; Giokaris, N.; Giordano, R.; Giorgi, F. M.; Giovannini, P.; Giraud, P. F.; Giugni, D.; Giunta, M.; Giusti, P.; Gjelsten, B. K.; Gladilin, L. K.; Glasman, C.; Glatzer, J.; Glazov, A.; Glitza, K. W.; Glonti, G. L.; Godfrey, J.; Godlewski, J.; Goebel, M.; Göpfert, T.; Goeringer, C.; Gössling, C.; Göttfert, T.; Goldfarb, S.; Goldin, D.; Golling, T.; Golovnia, S. N.; Gomes, A.; Gomez Fajardo, L. S.; Gonçcalo, R.; Goncalves Pinto Firmino Da Costa, J.; Gonella, L.; Gonidec, A.; Gonzalez, S.; González de la Hoz, S.; Gonzalez Silva, M. L.; Gonzalez-Sevilla, S.; Goodson, J. J.; Goossens, L.; Gorbounov, P. A.; Gordon, H. A.; Gorelov, I.; Gorfine, G.; Gorini, B.; Gorini, E.; Gorišek, A.; Gornicki, E.; Gorokhov, S. A.; Goryachev, V. N.; Gosdzik, B.; Gosselink, M.; Gostkin, M. I.; Gouanère, M.; Eschrich, I. Gough; Gouighri, M.; Goujdami, D.; Goulette, M. P.; Goussiou, A. G.; Goy, C.; Grabowska-Bold, I.; Grabski, V.; Grafström, P.; Grah, C.; Grahn, K.-J.; Grancagnolo, F.; Grancagnolo, S.; Grassi, V.; Gratchev, V.; Grau, N.; Gray, H. M.; Gray, J. A.; Graziani, E.; Grebenyuk, O. G.; Greenfield, D.; Greenshaw, T.; Greenwood, Z. D.; Gregor, I. M.; Grenier, P.; Griffiths, J.; Grigalashvili, N.; Grillo, A. A.; Grinstein, S.; Grishkevich, Y. V.; Grivaz, J.-F.; Grognuz, J.; Groh, M.; Gross, E.; Grosse-Knetter, J.; Groth-Jensen, J.; Grybel, K.; Guarino, V. J.; Guest, D.; Guicheney, C.; Guida, A.; Guillemin, T.; Guindon, S.; Guler, H.; Gunther, J.; Guo, B.; Guo, J.; Gupta, A.; Gusakov, Y.; Gushchin, V. N.; Gutierrez, A.; Gutierrez, P.; Guttman, N.; Gutzwiller, O.; Guyot, C.; Gwenlan, C.; Gwilliam, C. B.; Haas, A.; Haas, S.; Haber, C.; Hackenburg, R.; Hadavand, H. K.; Hadley, D. R.; Haefner, P.; Hahn, F.; Haider, S.; Hajduk, Z.; Hakobyan, H.; Haller, J.; Hamacher, K.; Hamal, P.; Hamilton, A.; Hamilton, S.; Han, H.; Han, L.; Hanagaki, K.; Hance, M.; Handel, C.; Hanke, P.; Hansen, J. R.; Hansen, J. B.; Hansen, J. D.; Hansen, P. H.; Hansson, P.; Hara, K.; Hare, G. A.; Harenberg, T.; Harkusha, S.; Harper, D.; Harrington, R. D.; Harris, O. M.; Harrison, K.; Hartert, J.; Hartjes, F.; Haruyama, T.; Harvey, A.; Hasegawa, S.; Hasegawa, Y.; Hassani, S.; Hatch, M.; Hauff, D.; Haug, S.; Hauschild, M.; Hauser, R.; Havranek, M.; Hawes, B. M.; Hawkes, C. M.; Hawkings, R. J.; Hawkins, D.; Hayakawa, T.; Hayden, D.; Hayward, H. S.; Haywood, S. J.; Hazen, E.; He, M.; Head, S. J.; Hedberg, V.; Heelan, L.; Heim, S.; Heinemann, B.; Heisterkamp, S.; Helary, L.; Heller, M.; Hellman, S.; Hellmich, D.; Helsens, C.; Henderson, R. C. W.; Henke, M.; Henrichs, A.; Henriques Correia, A. M.; Henrot-Versille, S.; Henry-Couannier, F.; Hensel, C.; Henß, T.; Hernandez, C. M.; Hernández Jiménez, Y.; Herrberg, R.; Hershenhorn, A. D.; Herten, G.; Hertenberger, R.; Hervas, L.; Hessey, N. P.; Hidvegi, A.; Higón-Rodriguez, E.; Hill, D.; Hill, J. C.; Hill, N.; Hiller, K. H.; Hillert, S.; Hillier, S. J.; Hinchliffe, I.; Hines, E.; Hirose, M.; Hirsch, F.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M. C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M. R.; Hoffman, J.; Hoffmann, D.; Hohlfeld, M.; Holder, M.; Holmes, A.; Holmgren, S. O.; Holy, T.; Holzbauer, J. L.; Homma, Y.; Hong, T. M.; Hooft van Huysduynen, L.; Horazdovsky, T.; Horn, C.; Horner, S.; Horton, K.; Hostachy, J.-Y.; Hou, S.; Houlden, M. A.; Hoummada, A.; Howarth, J.; Howell, D. F.; Hristova, I.; Hrivnac, J.; Hruska, I.; Hryn'ova, T.; Hsu, P. J.; Hsu, S.-C.; Huang, G. S.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Huffman, T. B.; Hughes, E. W.; Hughes, G.; Hughes-Jones, R. E.; Huhtinen, M.; Hurst, P.; Hurwitz, M.; Husemann, U.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibbotson, M.; Ibragimov, I.; Ichimiya, R.; Iconomidou-Fayard, L.; Idarraga, J.; Idzik, M.; Iengo, P.; Igonkina, O.; Ikegami, Y.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Imbault, D.; Imhaeuser, M.; Imori, M.; Ince, T.; Inigo-Golfin, J.; Ioannou, P.; Iodice, M.; Ionescu, G.; Irles Quiles, A.; Ishii, K.; Ishikawa, A.; Ishino, M.; Ishmukhametov, R.; Issever, C.; Istin, S.; Ivashin, A. V.; Iwanski, W.; Iwasaki, H.; Izen, J. M.; Izzo, V.; Jackson, B.; Jackson, J. N.; Jackson, P.; Jaekel, M. R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakubek, J.; Jana, D. K.; Jankowski, E.; Jansen, E.; Jantsch, A.; Janus, M.; Jarlskog, G.; Jeanty, L.; Jelen, K.; Jen-La Plante, I.; Jenni, P.; Jeremie, A.; Jež, P.; Jézéquel, S.; Jha, M. K.; Ji, H.; Ji, W.; Jia, J.; Jiang, Y.; Jimenez Belenguer, M.; Jin, G.; Jin, S.; Jinnouchi, O.; Joergensen, M. D.; Joffe, D.; Johansen, L. G.; Johansen, M.; Johansson, K. E.; Johansson, P.; Johnert, S.; Johns, K. A.; Jon-And, K.; Jones, G.; Jones, R. W. L.; Jones, T. W.; Jones, T. J.; Jonsson, O.; Joram, C.; Jorge, P. M.; Joseph, J.; Jovin, T.; Ju, X.; Juranek, V.; Jussel, P.; Rozas, A. Juste; Kabachenko, V. V.; Kabana, S.; Kaci, M.; Kaczmarska, A.; Kadlecik, P.; Kado, M.; Kagan, H.; Kagan, M.; Kaiser, S.; Kajomovitz, E.; Kalinin, S.; Kalinovskaya, L. V.; Kama, S.; Kanaya, N.; Kaneda, M.; Kanno, T.; Kantserov, V. A.; Kanzaki, J.; Kaplan, B.; Kapliy, A.; Kaplon, J.; Kar, D.; Karagoz, M.; Karnevskiy, M.; Karr, K.; Kartvelishvili, V.; Karyukhin, A. N.; Kashif, L.; Kasmi, A.; Kass, R. D.; Kastanas, A.; Kataoka, M.; Kataoka, Y.; Katsoufis, E.; Katzy, J.; Kaushik, V.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kayl, M. S.; Kazanin, V. A.; Kazarinov, M. Y.; Keates, J. R.; Keeler, R.; Kehoe, R.; Keil, M.; Kekelidze, G. D.; Kelly, M.; Kennedy, J.; Kenney, C. J.; Kenyon, M.; Kepka, O.; Kerschen, N.; Kerševan, B. P.; Kersten, S.; Kessoku, K.; Ketterer, C.; Keung, J.; Khakzad, M.; Khalil-zada, F.; Khandanyan, H.; Khanov, A.; Kharchenko, D.; Khodinov, A.; Kholodenko, A. G.; Khomich, A.; Khoo, T. J.; Khoriauli, G.; Khoroshilov, A.; Khovanskiy, N.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kim, H.; Kim, M. S.; Kim, P. C.; Kim, S. H.; Kimura, N.; Kind, O.; King, B. T.; King, M.; King, R. S. B.; Kirk, J.; Kirsch, G. P.; Kirsch, L. E.; Kiryunin, A. E.; Kishimoto, T.; Kisielewska, D.; Kittelmann, T.; Kiver, A. M.; Kiyamura, H.; Kladiva, E.; Klaiber-Lodewigs, J.; Klein, M.; Klein, U.; Kleinknecht, K.; Klemetti, M.; Klier, A.; Klimentov, A.; Klingenberg, R.; Klinkby, E. B.; Klioutchnikova, T.; Klok, P. F.; Klous, S.; Kluge, E.-E.; Kluge, T.; Kluit, P.; Kluth, S.; Knecht, N. S.; Kneringer, E.; Knobloch, J.; Knoops, E. B. F. G.; Knue, A.; Ko, B. R.; Kobayashi, T.; Kobel, M.; Kocian, M.; Kocnar, A.; Kodys, P.; Köneke, K.; König, A. C.; Koenig, S.; Köpke, L.; Koetsveld, F.; Koevesarki, P.; Koffas, T.; Koffeman, E.; Kohn, F.; Kohout, Z.; Kohriki, T.; Koi, T.; Kokott, T.; Kolachev, G. M.; Kolanoski, H.; Kolesnikov, V.; Koletsou, I.; Koll, J.; Kollar, D.; Kollefrath, M.; Kolya, S. D.; Komar, A. A.; Komaragiri, J. R.; Komori, Y.; Kondo, T.; Kono, T.; Kononov, A. I.; Konoplich, R.; Konstantinidis, N.; Kootz, A.; Koperny, S.; Kopikov, S. V.; Korcyl, K.; Kordas, K.; Koreshev, V.; Korn, A.; Korol, A.; Korolkov, I.; Korolkova, E. V.; Korotkov, V. A.; Kortner, O.; Kortner, S.; Kostyukhin, V. V.; Kotamäki, M. J.; Kotov, S.; Kotov, V. M.; Kotwal, A.; Kourkoumelis, C.; Kouskoura, V.; Koutsman, A.; Kowalewski, R.; Kowalski, T. Z.; Kozanecki, W.; Kozhin, A. S.; Kral, V.; Kramarenko, V. A.; Kramberger, G.; Krasny, M. W.; Krasznahorkay, A.; Kraus, J.; Kreisel, A.; Krejci, F.; Kretzschmar, J.; Krieger, N.; Krieger, P.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Krüger, H.; Kruker, T.; Krumshteyn, Z. V.; Kruth, A.; Kubota, T.; Kuehn, S.; Kugel, A.; Kuhl, T.; Kuhn, D.; Kukhtin, V.; Kulchitsky, Y.; Kuleshov, S.; Kummer, C.; Kuna, M.; Kundu, N.; Kunkle, J.; Kupco, A.; Kurashige, H.; Kurata, M.; Kurochkin, Y. A.; Kus, V.; Kuykendall, W.; Kuze, M.; Kuzhir, P.; Kvasnicka, O.; Kvita, J.; Kwee, R.; La Rosa, A.; La Rotonda, L.; Labarga, L.; Labbe, J.; Lablak, S.; Lacasta, C.; Lacava, F.; Lacker, H.; Lacour, D.; Lacuesta, V. R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Laisne, E.; Lamanna, M.; Lampen, C. L.; Lampl, W.; Lancon, E.; Landgraf, U.; Landon, M. P. J.; Landsman, H.; Lane, J. L.; Lange, C.; Lankford, A. J.; Lanni, F.; Lantzsch, K.; Laplace, S.; Lapoire, C.; Laporte, J. F.; Lari, T.; Larionov, A. V.; Larner, A.; Lasseur, C.; Lassnig, M.; Laurelli, P.; Lavorato, A.; Lavrijsen, W.; Laycock, P.; Lazarev, A. B.; Le Dortz, O.; Le Guirriec, E.; Le Maner, C.; Le Menedeu, E.; Lebel, C.; LeCompte, T.; Ledroit-Guillon, F.; Lee, H.; Lee, J. S. H.; Lee, S. C.; Lee, L.; Lefebvre, M.; Legendre, M.; Leger, A.; LeGeyt, B. C.; Legger, F.; Leggett, C.; Lehmacher, M.; Lehmann Miotto, G.; Lei, X.; Leite, M. A. L.; Leitner, R.; Lellouch, D.; Lellouch, J.; Leltchouk, M.; Lemmer, B.; Lendermann, V.; Leney, K. J. C.; Lenz, T.; Lenzen, G.; Lenzi, B.; Leonhardt, K.; Leontsinis, S.; Leroy, C.; Lessard, J.-R.; Lesser, J.; Lester, C. G.; Leung Fook Cheong, A.; Levêque, J.; Levin, D.; Levinson, L. J.; Levitski, M. S.; Lewandowska, M.; Lewis, A.; Lewis, G. H.; Leyko, A. M.; Leyton, M.; Li, B.; Li, H.; Li, S.; Li, X.; Liang, Z.; Liang, Z.; Liberti, B.; Lichard, P.; Lichtnecker, M.; Lie, K.; Liebig, W.; Lifshitz, R.; Lilley, J. N.; Limbach, C.; Limosani, A.; Limper, M.; Lin, S. C.; Linde, F.; Linnemann, J. T.; Lipeles, E.; Lipinsky, L.; Lipniacka, A.; Liss, T. M.; Lissauer, D.; Lister, A.; Litke, A. M.; Liu, C.; Liu, D.; Liu, H.; Liu, J. B.; Liu, M.; Liu, S.; Liu, Y.; Livan, M.; Livermore, S. S. A.; Lleres, A.; Llorente Merino, J.; Lloyd, S. L.; Lobodzinska, E.; Loch, P.; Lockman, W. S.; Lockwitz, S.; Loddenkoetter, T.; Loebinger, F. K.; Loginov, A.; Loh, C. W.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Loken, J.; Lombardo, V. P.; Long, R. E.; Lopes, L.; Mateos, D. Lopez; Losada, M.; Loscutoff, P.; Sterzo, F. Lo; Losty, M. J.; Lou, X.; Lounis, A.; Loureiro, K. F.; Love, J.; Love, P. A.; Lowe, A. J.; Lu, F.; Lubatti, H. J.; Luci, C.; Lucotte, A.; Ludwig, A.; Ludwig, D.; Ludwig, I.; Ludwig, J.; Luehring, F.; Luijckx, G.; Lumb, D.; Luminari, L.; Lund, E.; Lund-Jensen, B.; Lundberg, B.; Lundberg, J.; Lundquist, J.; Lungwitz, M.; Lupi, A.; Lutz, G.; Lynn, D.; Lys, J.; Lytken, E.; Ma, H.; Ma, L. L.; Macana Goia, J. A.; Maccarrone, G.; Macchiolo, A.; Maček, B.; Machado Miguens, J.; Macina, D.; Mackeprang, R.; Madaras, R. J.; Mader, W. F.; Maenner, R.; Maeno, T.; Mättig, P.; Mättig, S.; Magalhaes Martins, P. J.; Magnoni, L.; Magradze, E.; Mahalalel, Y.; Mahboubi, K.; Mahout, G.; Maiani, C.; Maidantchik, C.; Maio, A.; Majewski, S.; Makida, Y.; Makovec, N.; Mal, P.; Malecki, Pa.; Malecki, P.; Maleev, V. P.; Malek, F.; Mallik, U.; Malon, D.; Maltezos, S.; Malyshev, V.; Malyukov, S.; Mameghani, R.; Mamuzic, J.; Manabe, A.; Mandelli, L.; Mandić, I.; Mandrysch, R.; Maneira, J.; Mangeard, P. S.; Manjavidze, I. D.; Mann, A.; Manning, P. M.; Manousakis-Katsikakis, A.; Mansoulie, B.; Manz, A.; Mapelli, A.; Mapelli, L.; March, L.; Marchand, J. F.; Marchese, F.; Marchiori, G.; Marcisovsky, M.; Marin, A.; Marino, C. P.; Marroquim, F.; Marshall, R.; Marshall, Z.; Martens, F. K.; Marti-Garcia, S.; Martin, A. J.; Martin, B.; Martin, B.; Martin, F. F.; Martin, J. P.; Martin, Ph.; Martin, T. A.; Martin dit Latour, B.; Martin-Haugh, S.; Martinez, M.; Martinez Outschoorn, V.; Martyniuk, A. C.; Marx, M.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A. L.; Massa, I.; Massaro, G.; Massol, N.; Mastrandrea, P.; Mastroberardino, A.; Masubuchi, T.; Mathes, M.; Matricon, P.; Matsumoto, H.; Matsunaga, H.; Matsushita, T.; Mattravers, C.; Maugain, J. M.; Maxfield, S. J.; Maximov, D. A.; May, E. N.; Mayne, A.; Mazini, R.; Mazur, M.; Mazzanti, M.; Mazzoni, E.; Mc Kee, S. P.; McCarn, A.; McCarthy, R. L.; McCarthy, T. G.; McCubbin, N. A.; McFarlane, K. W.; Mcfayden, J. A.; McGlone, H.; Mchedlidze, G.; McLaren, R. A.; Mclaughlan, T.; McMahon, S. J.; McPherson, R. A.; Meade, A.; Mechnich, J.; Mechtel, M.; Medinnis, M.; Meera-Lebbai, R.; Meguro, T.; Mehdiyev, R.; Mehlhase, S.; Mehta, A.; Meier, K.; Meinhardt, J.; Meirose, B.; Melachrinos, C.; Mellado Garcia, B. R.; Mendoza Navas, L.; Meng, Z.; Mengarelli, A.; Menke, S.; Menot, C.; Meoni, E.; Mercurio, K. M.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F. S.; Messina, A.; Metcalfe, J.; Mete, A. S.; Meuser, S.; Meyer, C.; Meyer, J.-P.; Meyer, J.; Meyer, J.; Meyer, T. C.; Meyer, W. T.; Miao, J.; Michal, S.; Micu, L.; Middleton, R. P.; Miele, P.; Migas, S.; Mijović, L.; Mikenberg, G.; Mikestikova, M.; Mikuž, M.; Miller, D. W.; Miller, R. J.; Mills, W. J.; Mills, C.; Milov, A.; Milstead, D. A.; Milstein, D.; Minaenko, A. A.; Miñano, M.; Minashvili, I. A.; Mincer, A. I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L. M.; Mirabelli, G.; Verge, L. Miralles; Misiejuk, A.; Mitrevski, J.; Mitrofanov, G. Y.; Mitsou, V. A.; Mitsui, S.; Miyagawa, P. S.; Miyazaki, K.; Mjörnmark, J. U.; Moa, T.; Mockett, P.; Moed, S.; Moeller, V.; Mönig, K.; Möser, N.; Mohapatra, S.; Mohr, W.; Mohrdieck-Möck, S.; Moisseev, A. M.; Moles-Valls, R.; Molina-Perez, J.; Monk, J.; Monnier, E.; Montesano, S.; Monticelli, F.; Monzani, S.; Moore, R. W.; Moorhead, G. F.; Mora Herrera, C.; Moraes, A.; Morais, A.; Morange, N.; Morel, J.; Morello, G.; Moreno, D.; Moreno Llácer, M.; Morettini, P.; Morii, M.; Morin, J.; Morita, Y.; Morley, A. K.; Mornacchi, G.; Morone, M.-C.; Morozov, S. V.; Morris, J. D.; Morvaj, L.; Moser, H. G.; Mosidze, M.; Moss, J.; Mount, R.; Mountricha, E.; Mouraviev, S. V.; Moyse, E. J. W.; Mudrinic, M.; Mueller, F.; Mueller, J.; Mueller, K.; Müller, T. A.; Muenstermann, D.; Muir, A.; Munwes, Y.; Murakami, K.; Murray, W. J.; Mussche, I.; Musto, E.; Myagkov, A. G.; Myska, M.; Nadal, J.; Nagai, K.; Nagano, K.; Nagasaka, Y.; Nairz, A. M.; Nakahama, Y.; Nakamura, K.; Nakano, I.; Nanava, G.; Napier, A.; Nash, M.; Nation, N. R.; Nattermann, T.; Naumann, T.; Navarro, G.; Neal, H. A.; Nebot, E.; Nechaeva, P. Yu.; Negri, A.; Negri, G.; Nektarijevic, S.; Nelson, S.; Nelson, T. K.; Nemecek, S.; Nemethy, P.; Nepomuceno, A. A.; Nessi, M.; Nesterov, S. Y.; Neubauer, M. S.; Neusiedl, A.; Neves, R. M.; Nevski, P.; Newman, P. R.; Nguyen Thi Hong, V.; Nickerson, R. B.; Nicolaidou, R.; Nicolas, L.; Nicquevert, B.; Niedercorn, F.; Nielsen, J.; Niinikoski, T.; Nikiforou, N.; Nikiforov, A.; Nikolaenko, V.; Nikolaev, K.; Nikolic-Audit, I.; Nikolics, K.; Nikolopoulos, K.; Nilsen, H.; Nilsson, P.; Ninomiya, Y.; Nisati, A.; Nishiyama, T.; Nisius, R.; Nodulman, L.; Nomachi, M.; Nomidis, I.; Nordberg, M.; Nordkvist, B.; Norton, P. R.; Novakova, J.; Nozaki, M.; Nožička, M.; Nozka, L.; Nugent, I. M.; Nuncio-Quiroz, A.-E.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; Nyman, T.; O'Brien, B. J.; O'Neale, S. W.; O'Neil, D. C.; O'Shea, V.; Oakham, F. G.; Oberlack, H.; Ocariz, J.; Ochi, A.; Oda, S.; Odaka, S.; Odier, J.; Ogren, H.; Oh, A.; Oh, S. H.; Ohm, C. C.; Ohshima, T.; Ohshita, H.; Ohska, T. K.; Ohsugi, T.; Okada, S.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olcese, M.; Olchevski, A. G.; Oliveira, M.; Oliveira Damazio, D.; Oliver Garcia, E.; Olivito, D.; Olszewski, A.; Olszowska, J.; Omachi, C.; Onofre, A.; Onyisi, P. U. E.; Oram, C. J.; Oreglia, M. J.; Oren, Y.; Orestano, D.; Orlov, I.; Oropeza Barrera, C.; Orr, R. S.; Osculati, B.; Ospanov, R.; Osuna, C.; Otero y Garzon, G.; Ottersbach, J. P.; Ouchrif, M.; Ould-Saada, F.; Ouraou, A.; Ouyang, Q.; Owen, M.; Owen, S.; Ozcan, V. E.; Ozturk, N.; Pacheco Pages, A.; Padilla Aranda, C.; Pagan Griso, S.; Paganis, E.; Paige, F.; Pajchel, K.; Paleari, C. P.; Palestini, S.; Pallin, D.; Palma, A.; Palmer, J. D.; Pan, Y. B.; Panagiotopoulou, E.; Panes, B.; Panikashvili, N.; Panitkin, S.; Pantea, D.; Panuskova, M.; Paolone, V.; Papadelis, A.; Papadopoulou, Th. D.; Paramonov, A.; Park, W.; Parker, M. A.; Parodi, F.; Parsons, J. A.; Parzefall, U.; Pasqualucci, E.; Passeri, A.; Pastore, F.; Pastore, Fr.; Pásztor, G.; Pataraia, S.; Patel, N.; Pater, J. R.; Patricelli, S.; Pauly, T.; Pecsy, M.; Pedraza Morales, M. I.; Peleganchuk, S. V.; Peng, H.; Pengo, R.; Penson, A.; Penwell, J.; Perantoni, M.; Perez, K.; Perez Cavalcanti, T.; Perez Codina, E.; Pérez García-Estañ, M. T.; Perez Reale, V.; Perini, L.; Pernegger, H.; Perrino, R.; Perrodo, P.; Persembe, S.; Peshekhonov, V. D.; Peters, O.; Petersen, B. A.; Petersen, J.; Petersen, T. C.; Petit, E.; Petridis, A.; Petridou, C.; Petrolo, E.; Petrucci, F.; Petschull, D.; Petteni, M.; Pezoa, R.; Phan, A.; Phillips, A. W.; Phillips, P. W.; Piacquadio, G.; Piccaro, E.; Piccinini, M.; Pickford, A.; Piec, S. M.; Piegaia, R.; Pilcher, J. E.; Pilkington, A. D.; Pina, J.; Pinamonti, M.; Pinder, A.; Pinfold, J. L.; Ping, J.; Pinto, B.; Pirotte, O.; Pizio, C.; Placakyte, R.; Plamondon, M.; Plano, W. G.; Pleier, M.-A.; Pleskach, A. V.; Poblaguev, A.; Poddar, S.; Podlyski, F.; Poggioli, L.; Poghosyan, T.; Pohl, M.; Polci, F.; Polesello, G.; Policicchio, A.; Polini, A.; Poll, J.; Polychronakos, V.; Pomarede, D. M.; Pomeroy, D.; Pommès, K.; Pontecorvo, L.; Pope, B. G.; Popeneciu, G. A.; Popovic, D. S.; Poppleton, A.; Bueso, X. Portell; Porter, R.; Posch, C.; Pospelov, G. E.; Pospisil, S.; Potrap, I. N.; Potter, C. J.; Potter, C. T.; Poulard, G.; Poveda, J.; Prabhu, R.; Pralavorio, P.; Prasad, S.; Pravahan, R.; Prell, S.; Pretzl, K.; Pribyl, L.; Price, D.; Price, L. E.; Price, M. J.; Prichard, P. M.; Prieur, D.; Primavera, M.; Prokofiev, K.; Prokoshin, F.; Protopopescu, S.; Proudfoot, J.; Prudent, X.; Przysiezniak, H.; Psoroulas, S.; Ptacek, E.; Purdham, J.; Purohit, M.; Puzo, P.; Pylypchenko, Y.; Qian, J.; Qian, Z.; Qin, Z.; Quadt, A.; Quarrie, D. R.; Quayle, W. B.; Quinonez, F.; Raas, M.; Radescu, V.; Radics, B.; Rador, T.; Ragusa, F.; Rahal, G.; Rahimi, A. M.; Rahm, D.; Rajagopalan, S.; Rammensee, M.; Rammes, M.; Ramstedt, M.; Randle-Conde, A. S.; Randrianarivony, K.; Ratoff, P. N.; Rauscher, F.; Rauter, E.; Raymond, M.; Read, A. L.; Rebuzzi, D. M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Reichold, A.; Reinherz-Aronis, E.; Reinsch, A.; Reisinger, I.; Reljic, D.; Rembser, C.; Ren, Z. L.; Renaud, A.; Renkel, P.; Rescigno, M.; Resconi, S.; Resende, B.; Reznicek, P.; Rezvani, R.; Richards, A.; Richter, R.; Richter-Was, E.; Ridel, M.; Rieke, S.; Rijpstra, M.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Rios, R. R.; Riu, I.; Rivoltella, G.; Rizatdinova, F.; Rizvi, E.; Robertson, S. H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, J. E. M.; Robinson, M.; Robson, A.; Rocha de Lima, J. G.; Roda, C.; Roda Dos Santos, D.; Rodier, S.; Rodriguez, D.; Roe, A.; Roe, S.; Røhne, O.; Rojo, V.; Rolli, S.; Romaniouk, A.; Romanov, V. M.; Romeo, G.; Romero Maltrana, D.; Roos, L.; Ros, E.; Rosati, S.; Rosbach, K.; Rose, A.; Rose, M.; Rosenbaum, G. A.; Rosenberg, E. I.; Rosendahl, P. L.; Rosselet, L.; Rossetti, V.; Rossi, E.; Rossi, L. P.; Rossi, L.; Rotaru, M.; Roth, I.; Rothberg, J.; Rousseau, D.; Royon, C. R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Rubinskiy, I.; Ruckert, B.; Ruckstuhl, N.; Rud, V. I.; Rudolph, C.; Rudolph, G.; Rühr, F.; Ruggieri, F.; Ruiz-Martinez, A.; Rulikowska-Zarebska, E.; Rumiantsev, V.; Rumyantsev, L.; Runge, K.; Runolfsson, O.; Rurikova, Z.; Rusakovich, N. A.; Rust, D. R.; Rutherfoord, J. P.; Ruwiedel, C.; Ruzicka, P.; Ryabov, Y. F.; Ryadovikov, V.; Ryan, P.; Rybar, M.; Rybkin, G.; Ryder, N. C.; Rzaeva, S.; Saavedra, A. F.; Sadeh, I.; Sadrozinski, H. F.-W.; Sadykov, R.; Tehrani, F. Safai; Sakamoto, H.; Salamanna, G.; Salamon, A.; Saleem, M.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvachua Ferrando, B. M.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sampsonidis, D.; Samset, B. H.; Sanchez, A.; Sandaker, H.; Sander, H. G.; Sanders, M. P.; Sandhoff, M.; Sandoval, T.; Sandoval, C.; Sandstroem, R.; Sandvoss, S.; Sankey, D. P. C.; Sansoni, A.; Santamarina Rios, C.; Santoni, C.; Santonico, R.; Santos, H.; Saraiva, J. G.; Sarangi, T.; Sarkisyan-Grinbaum, E.; Sarri, F.; Sartisohn, G.; Sasaki, O.; Sasaki, T.; Sasao, N.; Satsounkevitch, I.; Sauvage, G.; Sauvan, E.; Sauvan, J. B.; Savard, P.; Savinov, V.; Savu, D. O.; Savva, P.; Sawyer, L.; Saxon, D. H.; Says, L. P.; Sbarra, C.; Sbrizzi, A.; Scallon, O.; Scannicchio, D. A.; Schaarschmidt, J.; Schacht, P.; Schäfer, U.; Schaepe, S.; Schaetzel, S.; Schaffer, A. C.; Schaile, D.; Schamberger, R. D.; Schamov, A. G.; Scharf, V.; Schegelsky, V. A.; Scheirich, D.; Schernau, M.; Scherzer, M. I.; Schiavi, C.; Schieck, J.; Schioppa, M.; Schlenker, S.; Schlereth, J. L.; Schmidt, E.; Schmieden, K.; Schmitt, C.; Schmitt, S.; Schmitz, M.; Schöning, A.; Schott, M.; Schouten, D.; Schovancova, J.; Schram, M.; Schroeder, C.; Schroer, N.; Schuh, S.; Schuler, G.; Schultes, J.; Schultz-Coulon, H.-C.; Schulz, H.; Schumacher, J. W.; Schumacher, M.; Schumm, B. A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwemling, Ph.; Schwienhorst, R.; Schwierz, R.; Schwindling, J.; Schwindt, T.; Scott, W. G.; Searcy, J.; Sedykh, E.; Segura, E.; Seidel, S. C.; Seiden, A.; Seifert, F.; Seixas, J. M.; Sekhniaidze, G.; Seliverstov, D. M.; Sellden, B.; Sellers, G.; Seman, M.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Seuster, R.; Severini, H.; Sevior, M. E.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L. Y.; Shank, J. T.; Shao, Q. T.; Shapiro, M.; Shatalov, P. B.; Shaver, L.; Shaw, C.; Shaw, K.; Sherman, D.; Sherwood, P.; Shibata, A.; Shichi, H.; Shimizu, S.; Shimojima, M.; Shin, T.; Shmeleva, A.; Shochet, M. J.; Short, D.; Shupe, M. A.; Sicho, P.; Sidoti, A.; Siebel, A.; Siegert, F.; Siegrist, J.; Sijacki, Dj.; Silbert, O.; Silva, J.; Silver, Y.; Silverstein, D.; Silverstein, S. B.; Simak, V.; Simard, O.; Simic, Lj.; Simion, S.; Simmons, B.; Simonyan, M.; Sinervo, P.; Sinev, N. B.; Sipica, V.; Siragusa, G.; Sircar, A.; Sisakyan, A. N.; Sivoklokov, S. Yu.; Sjölin, J.; Sjursen, T. B.; Skinnari, L. A.; Skovpen, K.; Skubic, P.; Skvorodnev, N.; Slater, M.; Slavicek, T.; Sliwa, K.; Sloan, T. J.; Sloper, J.; Smakhtin, V.; Smirnov, S. Yu.; Smirnova, L. N.; Smirnova, O.; Smith, B. C.; Smith, D.; Smith, K. M.; Smizanska, M.; Smolek, K.; Snesarev, A. A.; Snow, S. W.; Snow, J.; Snuverink, J.; Snyder, S.; Soares, M.; Sobie, R.; Sodomka, J.; Soffer, A.; Solans, C. A.; Solar, M.; Solc, J.; Soldatov, E.; Soldevila, U.; Solfaroli Camillocci, E.; Solodkov, A. A.; Solovyanov, O. V.; Sondericker, J.; Soni, N.; Sopko, V.; Sopko, B.; Sorbi, M.; Sosebee, M.; Soukharev, A.; Spagnolo, S.; Spanò, F.; Spighi, R.; Spigo, G.; Spila, F.; Spiriti, E.; Spiwoks, R.; Spousta, M.; Spreitzer, T.; Spurlock, B.; St. Denis, R. D.; Stahl, T.; Stahlman, J.; Stamen, R.; Stanecka, E.; Stanek, R. W.; Stanescu, C.; Stapnes, S.; Starchenko, E. A.; Stark, J.; Staroba, P.; Starovoitov, P.; Staude, A.; Stavina, P.; Stavropoulos, G.; Steele, G.; Steinbach, P.; Steinberg, P.; Stekl, I.; Stelzer, B.; Stelzer, H. J.; Stelzer-Chilton, O.; Stenzel, H.; Stevenson, K.; Stewart, G. A.; Stillings, J. A.; Stockmanns, T.; Stockton, M. C.; Stoerig, K.; Stoicea, G.; Stonjek, S.; Strachota, P.; Stradling, A. R.; Straessner, A.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strang, M.; Strauss, E.; Strauss, M.; Strizenec, P.; Ströhmer, R.; Strom, D. M.; Strong, J. A.; Stroynowski, R.; Strube, J.; Stugu, B.; Stumer, I.; Stupak, J.; Sturm, P.; Soh, D. A.; Su, D.; Subramania, HS.; Succurro, A.; Sugaya, Y.; Sugimoto, T.; Suhr, C.; Suita, K.; Suk, M.; Sulin, V. V.; Sultansoy, S.; Sumida, T.; Sun, X.; Sundermann, J. E.; Suruliz, K.; Sushkov, S.; Susinno, G.; Sutton, M. R.; Suzuki, Y.; Svatos, M.; Sviridov, Yu. M.; Swedish, S.; Sykora, I.; Sykora, T.; Szeless, B.; Sánchez, J.; Ta, D.; Tackmann, K.; Taffard, A.; Tafirout, R.; Taga, A.; Taiblum, N.; Takahashi, Y.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Talby, M.; Talyshev, A.; Tamsett, M. C.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tanaka, S.; Tanaka, Y.; Tani, K.; Tannoury, N.; Tappern, G. P.; Tapprogge, S.; Tardif, D.; Tarem, S.; Tarrade, F.; Tartarelli, G. F.; Tas, P.; Tasevsky, M.; Tassi, E.; Tatarkhanov, M.; Taylor, C.; Taylor, F. E.; Taylor, G. N.; Taylor, W.; Teixeira Dias Castanheira, M.; Teixeira-Dias, P.; Temming, K. K.; Ten Kate, H.; Teng, P. K.; Terada, S.; Terashi, K.; Terron, J.; Terwort, M.; Testa, M.; Teuscher, R. J.; Thadome, J.; Therhaag, J.; Theveneaux-Pelzer, T.; Thioye, M.; Thoma, S.; Thomas, J. P.; Thompson, E. N.; Thompson, P. D.; Thompson, P. D.; Thompson, A. S.; Thomson, E.; Thomson, M.; Thun, R. P.; Tian, F.; Tic, T.; Tikhomirov, V. O.; Tikhonov, Y. A.; Timmermans, C. J. W. P.; Tipton, P.; Tique Aires Viegas, F. J.; Tisserant, S.; Tobias, J.; Toczek, B.; Todorov, T.; Todorova-Nova, S.; Toggerson, B.; Tojo, J.; Tokár, S.; Tokunaga, K.; Tokushuku, K.; Tollefson, K.; Tomoto, M.; Tompkins, L.; Toms, K.; Tong, G.; Tonoyan, A.; Topfel, C.; Topilin, N. D.; Torchiani, I.; Torrence, E.; Torres, H.; Torró Pastor, E.; Toth, J.; Touchard, F.; Tovey, D. R.; Traynor, D.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I. M.; Trincaz-Duvoid, S.; Trinh, T. N.; Tripiana, M. F.; Trischuk, W.; Trivedi, A.; Trocmé, B.; Troncon, C.; Trottier-McDonald, M.; Trzupek, A.; Tsarouchas, C.; Tseng, J. C.-L.; Tsiakiris, M.; Tsiareshka, P. V.; Tsionou, D.; Tsipolitis, G.; Tsiskaridze, V.; Tskhadadze, E. G.; Tsukerman, I. I.; Tsulaia, V.; Tsung, J.-W.; Tsuno, S.; Tsybychev, D.; Tua, A.; Tuggle, J. M.; Turala, M.; Turecek, D.; Turk Cakir, I.; Turlay, E.; Turra, R.; Tuts, P. M.; Tykhonov, A.; Tylmad, M.; Tyndel, M.; Tyrvainen, H.; Tzanakos, G.; Uchida, K.; Ueda, I.; Ueno, R.; Ugland, M.; Uhlenbrock, M.; Uhrmacher, M.; Ukegawa, F.; Unal, G.; Underwood, D. G.; Undrus, A.; Unel, G.; Unno, Y.; Urbaniec, D.; Urkovsky, E.; Urrejola, P.; Usai, G.; Uslenghi, M.; Vacavant, L.; Vacek, V.; Vachon, B.; Vahsen, S.; Valenta, J.; Valente, P.; Valentinetti, S.; Valkar, S.; Valladolid Gallego, E.; Vallecorsa, S.; Valls Ferrer, J. A.; van der Graaf, H.; van der Kraaij, E.; Van Der Leeuw, R.; van der Poel, E.; van der Ster, D.; Van Eijk, B.; van Eldik, N.; van Gemmeren, P.; van Kesteren, Z.; van Vulpen, I.; Vandelli, W.; Vandoni, G.; Vaniachine, A.; Vankov, P.; Vannucci, F.; Varela Rodriguez, F.; Vari, R.; Varnes, E. W.; Varouchas, D.; Vartapetian, A.; Varvell, K. E.; Vassilakopoulos, V. I.; Vazeille, F.; Vegni, G.; Veillet, J. J.; Vellidis, C.; Veloso, F.; Veness, R.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J. C.; Vest, A.; Vetterli, M. C.; Vichou, I.; Vickey, T.; Viehhauser, G. H. A.; Viel, S.; Villa, M.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M. G.; Vinek, E.; Vinogradov, V. B.; Virchaux, M.; Virzi, J.; Vitells, O.; Viti, M.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vlasak, M.; Vlasov, N.; Vogel, A.; Vokac, P.; Volpi, G.; Volpi, M.; Volpini, G.; von der Schmitt, H.; von Loeben, J.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorobiev, A. P.; Vorwerk, V.; Vos, M.; Voss, R.; Voss, T. T.; Vossebeld, J. H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vu Anh, T.; Vuillermet, R.; Vukotic, I.; Wagner, W.; Wagner, P.; Wahlen, H.; Wakabayashi, J.; Walbersloh, J.; Walch, S.; Walder, J.; Walker, R.; Walkowiak, W.; Wall, R.; Waller, P.; Wang, C.; Wang, H.; Wang, H.; Wang, J.; Wang, J.; Wang, J. C.; Wang, R.; Wang, S. M.; Warburton, A.; Ward, C. P.; Warsinsky, M.; Watkins, P. M.; Watson, A. T.; Watson, M. F.; Watts, G.; Watts, S.; Waugh, A. T.; Waugh, B. M.; Weber, J.; Weber, M.; Weber, M. S.; Weber, P.; Weidberg, A. R.; Weigell, P.; Weingarten, J.; Weiser, C.; Wellenstein, H.; Wells, P. S.; Wen, M.; Wenaus, T.; Wendler, S.; Weng, Z.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Werth, M.; Wessels, M.; Weydert, C.; Whalen, K.; Wheeler-Ellis, S. J.; Whitaker, S. P.; White, A.; White, M. J.; White, S.; Whitehead, S. R.; Whiteson, D.; Whittington, D.; Wicek, F.; Wicke, D.; Wickens, F. J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik, L. A. M.; Wijeratne, P. A.; Wildauer, A.; Wildt, M. A.; Wilhelm, I.; Wilkens, H. G.; Will, J. Z.; Williams, E.; Williams, H. H.; Willis, W.; Willocq, S.; Wilson, J. A.; Wilson, M. G.; Wilson, A.; Wingerter-Seez, I.; Winkelmann, S.; Winklmeier, F.; Wittgen, M.; Wolter, M. W.; Wolters, H.; Wong, W. C.; Wooden, G.; Wosiek, B. K.; Wotschack, J.; Woudstra, M. J.; Wraight, K.; Wright, C.; Wrona, B.; Wu, S. L.; Wu, X.; Wu, Y.; Wulf, E.; Wunstorf, R.; Wynne, B. M.; Xaplanteris, L.; Xella, S.; Xie, S.; Xie, Y.; Xu, C.; Xu, D.; Xu, G.; Yabsley, B.; Yacoob, S.; Yamada, M.; Yamaguchi, H.; Yamamoto, A.; Yamamoto, K.; Yamamoto, S.; Yamamura, T.; Yamanaka, T.; Yamaoka, J.; Yamazaki, T.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, U. K.; Yang, Y.; Yang, Y.; Yang, Z.; Yanush, S.; Yao, W.-M.; Yao, Y.; Yasu, Y.; Ybeles Smit, G. V.; Ye, J.; Ye, S.; Yilmaz, M.; Yoosoofmiya, R.; Yorita, K.; Yoshida, R.; Young, C.; Youssef, S.; Yu, D.; Yu, J.; Yu, J.; Yuan, L.; Yurkewicz, A.; Zaets, V. G.; Zaidan, R.; Zaitsev, A. M.; Zajacova, Z.; Zalite, Yo. K.; Zanello, L.; Zarzhitsky, P.; Zaytsev, A.; Zeitnitz, C.; Zeller, M.; Zemla, A.; Zendler, C.; Zenin, O.; Ženiš, T.; Zenonos, Z.; Zenz, S.; Zerwas, D.; Zevi della Porta, G.; Zhan, Z.; Zhang, D.; Zhang, H.; Zhang, J.; Zhang, X.; Zhang, Z.; Zhao, L.; Zhao, T.; Zhao, Z.; Zhemchugov, A.; Zheng, S.; Zhong, J.; Zhou, B.; Zhou, N.; Zhou, Y.; Zhu, C. G.; Zhu, H.; Zhu, J.; Zhu, Y.; Zhuang, X.; Zhuravlov, V.; Zieminska, D.; Zimmermann, R.; Zimmermann, S.; Zimmermann, S.; Ziolkowski, M.; Zitoun, R.; Živković, L.; Zmouchko, V. V.; Zobernig, G.; Zoccoli, A.; Zolnierowski, Y.; Zsenei, A.; zur Nedden, M.; Zutshi, V.; Zwalinski, L.

    2011-09-01

    A measurement of jet activity in the rapidity interval bounded by a dijet system is presented. Events are vetoed if a jet with transverse momentum greater than 20 GeV is found between the two boundary jets. The fraction of dijet events that survive the jet veto is presented for boundary jets that are separated by up to six units of rapidity and with mean transverse momentum 50 < {bar{p}_{text{T}}} < 500 GeV. The mean multiplicity of jets above the veto scale in the rapidity interval bounded by the dijet system is also presented as an alternative method for quantifying perturbative QCD emission. The data are compared to a next-to-leading order plus parton shower prediction from the powheg-box, an all-order resummation using the hej calculation and the pythia, herwig++ and alpgen event generators. The measurement was performed using pp collisions at sqrt {s} = 7 TeV using data recorded by the ATLAS detector in 2010.

  11. Seismic Absorption and Modulus Measurements in Porous Rocks in Lab and Field: Physical, Chemical, and Biological Effects of Fluids (Detecting a Biosurfactant Additive in a Field Irrigation Experiment)

    SciTech Connect

    Spetzler, Hartmut

    2006-05-01

    We have been exploring a new technology that is based on using low-frequency seismic attenuation data to monitor changes in fluid saturation conditions in two-fluid phase porous materials. The seismic attenuation mechanism is related to the loss of energy due to the hysteresis of resistance to meniscus movement (changes in surface tension, wettability) when a pore containing two fluids is stressed at very low frequencies (< 10 Hz). This technology has potential applications to monitoring changes in (1) leakage at buried waste sites, (2) contaminant remediation, and (3) flooding during enhanced petroleum recovery. We have concluded a three year field study at the Maricopa Agricultural Center site of the University of Arizona. Three sets of instruments were installed along an East-West line perpendicular to the 50m by 50m inigation site. Each set of instruments consisted of one three component seismometer and one tiltmeter. Microseisms and solid Earth-tides served as strain sources. The former have a power peak at a period of about 6 seconds and the tides have about two cycles per day. Installation of instruments commenced in late summer of 2002. The instruments operated nearly continuously until April 2005. During the fall of 2003 the site was irrigated with water and one year later with water containing 150 ppm of a biosurfactant additive. This biodegradable additive served to mimic a class of contaminants that change the surface tension of the inigation fluid. Tilt data clearly show tidal tilts superimposed on local tilts due to agricultural irrigation and field work. When the observed signals were correlated with site specific theoretical tilt signals we saw no anomalies for the water irrigation in 2003, but large anomalies on two stations for the surfactant irrigation in 2004. Occasional failures of seismometers as well as data acquisition systems contributed to less than continuous coverage. These data are noisier than the tilt data, but do also show possible

  12. Can additive measures add to an intersectional understanding? Experiences of gay and ethnic discrimination among HIV-positive Latino gay men

    PubMed Central

    Reisen, Carol A.; Brooks, Kelly D.; Zea, Maria Cecilia; Poppen, Paul J.; Bianchi, Fernanda T.

    2013-01-01

    The current study investigated a methodological question of whether traditional, additive, quantitative data can be used to address intersectional issues, and illustrated such an approach with a sample of 301 HIV-positive, Latino gay men in the U.S. Participants were surveyed using A-CASI. Hierarchical logistic set regression investigated the role of sets of variables reflecting demographic characteristics, gender nonconformity, and gay and ethnic discrimination in relation to depression and gay collective identity. Results showed the discrimination set was related to depression and to gay collective identity, as was gender nonconformity. Follow-up logistic regression showed that both types of discrimination were associated with greater depression, but gender nonconformity was not. Gay discrimination and gender nonconformity were positively associated with gay collective identity, whereas ethnic discrimination was negatively associated. Results are discussed in terms of the use of traditional quantitative data as a potential means of understanding intersectional issues, as well as of contributing to knowledge about individuals facing multiple structural inequalities. PMID:23647331

  13. Alcohol abuse and HIV infection have additive effects on frontal cortex function as measured by auditory evoked potential P3A latency.

    PubMed

    Fein, G; Biggins, C A; MacKay, S

    1995-02-01

    Both alcohol and human immunodeficiency virus (HIV) infection have been shown to produce central nervous system (CNS) morbidity in frontal brain regions. The degree to which the CNS morbidity in HIV infection, as it affects frontal cortex function, may be preferentially increased by alcohol abuse was examined using the auditory P3A evoked potential. The P3A indexes an orienting response, maximal over frontal cortex that occurs when novel nontarget stimuli are presented in the midst of a target detection paradigm. Four groups of subjects were compared: HIV+ alcohol abusers, HIV+ light/nondrinkers, HIV- alcohol abusers, and HIV- light/nondrinkers. The alcohol abuser and light/nondrinker HIV+ groups were matched on percent CD4 lymphocytes, insuring that the results reflected specific CNS effects and were not a result of differences between the groups in the degree of systemic immune suppression. Alcohol abuse and HIV infection had at least additive effects on P3A latency, consistent with alcohol abuse worsening the effect of HIV disease on frontal cortex function. Post-hoc analyses suggested that concomitant alcohol abuse results in the effects of HIV infection on P3A latency becoming manifest earlier in the HIV disease process. PMID:7727627

  14. Measurement of Acceptor-TΨC Helix Length of tRNA for Terminal A76-Addition by A-Adding Enzyme.

    PubMed

    Yamashita, Seisuke; Martinez, Anna; Tomita, Kozo

    2015-05-01

    The 3'-terminal CCA (C74C75A76-3') of tRNA is required for protein synthesis. In Aquifex aeolicus, the CCA-3' is synthesized by CC-adding and A-adding enzymes, although in most organisms, CCA is synthesized by a single CCA-adding enzyme. The mechanisms by which the A-adding enzyme adds only A76, but not C74C75, onto tRNA remained elusive. The complex structures of the enzyme with various tRNAs revealed the presence of a single tRNA binding site on the enzyme, with the enzyme measuring the acceptor-TΨC helix length of tRNA. The 3'-C75 of tRNA lacking A76 can reach the active site and the size and shape of the nucleotide binding pocket at the insertion stage are suitable for ATP. The 3'-C74 of tRNA lacking C75A76 cannot reach the active site, although CTP or ATP can bind the active pocket. Thus, the A-adding enzyme adds only A76, but not C74C75, onto tRNA. PMID:25914059

  15. Gasoline additives, emissions, and performance

    SciTech Connect

    1995-12-31

    The papers included in this publication deal with the influence of fuel, additive, and hardware changes on a variety of vehicle performance characteristics. Advanced techniques for measuring these performance parameters are also described. Contents include: Fleet test evaluation of gasoline additives for intake valve and combustion chamber deposit clean up; A technique for evaluating octane requirement additives in modern engines on dynamometer test stands; A fleet test of two additive technologies comparing their effects on tailpipe emissions; Investigation into the vehicle exhaust emissions of high percentage ethanol blends; Variability in hydrocarbon speciation measurements at low emission (ULEV) levels; and more.

  16. Measurements of fiducial cross-sections for tt¯ production with one or two additional b-jets in pp collisions at √s = 8 TeV using the ATLAS detector

    DOE PAGESBeta

    Aad, G.; Abbott, B.; Abdallah, J.; Abdinov, O.; Aben, R.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Abreu, R.; et al

    2016-01-07

    Fiducial cross-sections for tt¯ production with one or two additional b -jets are reported, using an integrated luminosity of 20.3 fb–1 of proton–proton collisions at a centre-of-mass energy of 8 TeV at the Large Hadron Collider, collected with the ATLAS detector. The cross-section times branching ratio for tt¯ events with at least one additional b-jet is measured to be 950 ± 70 (stat.) +240-190 (syst.) fb in the lepton-plus-jets channel and 50 ± 10 (stat.) +15-10 (syst.) fb in the eμ channel. The cross-section times branching ratio for events with at least two additional b -jets is measured to bemore » 19.3 ± 3.5 (stat.) ± 5.7 (syst.) fb in the dilepton channel ( eμ , μμ , and ee ) using a method based on tight selection criteria, and 13.5 ± 3.3 (stat.) ± 3.6 (syst.) fb using a looser selection that allows the background normalisation to be extracted from data. The latter method also measures a value of 1.30 ± 0.33 (stat.) ± 0.28 (syst.)% for the ratio of tt¯ production with two additional b-jets to tt¯ production with any two additional jets. As a result, all measurements are in good agreement with recent theory predictions.« less

  17. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... from the date they are created a complete copy of the information required by 40 CFR 122.21(i)(1) and 40 CFR 122.42(e)(1)(ix) and the records specified in paragraphs (b)(1) through (b)(6) of this section... the information required by § 412.4 and 40 CFR 122.42(e)(1)(ix) and the records specified...

  18. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... from the date they are created a complete copy of the information required by 40 CFR 122.21(i)(1) and 40 CFR 122.42(e)(1)(ix) and the records specified in paragraphs (b)(1) through (b)(6) of this section... the information required by § 412.4 and 40 CFR 122.42(e)(1)(ix) and the records specified...

  19. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... from the date they are created a complete copy of the information required by 40 CFR 122.21(i)(1) and 40 CFR 122.42(e)(1)(ix) and the records specified in paragraphs (b)(1) through (b)(6) of this section... the information required by § 412.4 and 40 CFR 122.42(e)(1)(ix) and the records specified...

  20. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... from the date they are created a complete copy of the information required by 40 CFR 122.21(i)(1) and 40 CFR 122.42(e)(1)(ix) and the records specified in paragraphs (b)(1) through (b)(6) of this section... the information required by § 412.4 and 40 CFR 122.42(e)(1)(ix) and the records specified...

  1. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... from the date they are created a complete copy of the information required by 40 CFR 122.21(i)(1) and 40 CFR 122.42(e)(1)(ix) and the records specified in paragraphs (b)(1) through (b)(6) of this section... the information required by § 412.4 and 40 CFR 122.42(e)(1)(ix) and the records specified...

  2. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2008-07-01

    ... STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Dairy Cows and Cattle Other... to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines... yields; (2) The date(s) manure, litter, or process waste water is applied to each field; (3)...

  3. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2003-07-01

    ... STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Dairy Cows and Cattle Other... to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines... yields; (2) The date(s) manure, litter, or process waste water is applied to each field; (3)...

  4. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2013 CFR

    2004-07-01

    ... STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Dairy Cows and Cattle Other... to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines... yields; (2) The date(s) manure, litter, or process waste water is applied to each field; (3)...

  5. 40 CFR 412.37 - Additional measures.

    Code of Federal Regulations, 2012 CFR

    2007-07-01

    ... STANDARDS CONCENTRATED ANIMAL FEEDING OPERATIONS (CAFO) POINT SOURCE CATEGORY Dairy Cows and Cattle Other... to the wastewater and manure storage and containment structure; (ii) Daily inspection of water lines... yields; (2) The date(s) manure, litter, or process waste water is applied to each field; (3)...

  6. Applying Multiculturalism to a High School American Literature Course: Changing Lenses and Crossing Borders.

    ERIC Educational Resources Information Center

    Noskin, David; Marshalek, Angela

    1995-01-01

    Describes a nine-week, secondary-school, language arts unit on the American dream with an emphasis on multicultural issues, particularly as they concern those students who are apathetic about or resistant to the multicultural program. Reviews specific lesson approaches to "The Great Gatsby,""Baseball in April,""Justin and the Best Biscuits in the…

  7. Cross-border data exchange - a case study on international collaboration gone wrong

    NASA Astrophysics Data System (ADS)

    Yanko-Hombach, Valentina

    2016-04-01

    The subject of ethics in science has become a hot topic recently (Gleick, 2011). As publication pressure on researchers increases and use of the internet allows faster turn-around, the quality of the peer review process has suffered. This presentation describes one case of scientific ethics violation in which the editors of a high-ranking scientific journal improperly permitted publication of a paper that was based upon unethical acquisition of data and failed to acknowledge scientific collaboration and exchange of intellectual property. We will present "Case description" and "Ethical issues" with a hope that our experience draws attention to important ethical issues in international collaborative research, and prevents such misconduct in the future. Since international research involves cooperation and coordination among many people in different disciplines and institutions across national borders, ethical standards should promote values that are essential to integrity and collaborative work, including trust, accountability, mutual respect, and fairness. One lesson to be learned is not to engage in collaboration without a written agreement stating clearly who is responsible for what and how the results of collaborative research are to be shared. This is especially important in cases of international collaborations, particularly those involving smaller or developing nations who often do not have the high-tech facilities of developed nations. There is also need to establish clear regulations regarding co-authorship on papers in which intellectual property and significant financial investment was made to allow the research to proceed. As such, a system of ethics to guide the practice of science from data collection to publication and beyond is timely and much needed to protect the integrity of scientific collaboration. It will keep science moving forward by validating research findings and confirming or raising questions about results. References Benos, D. J., Fabres, J., Farmer, J., Gutierrez, J.P., Hennessy, K., Kosek, D., Joo Hyoung Lee, Olteanu, D., Russell, T., Shaikh, F., Wang, K. 2005. Ethics and scientific publication. Adv. Physiol. Educ. 29: 59-74. Gleick, P. 2011. AGU's new task force on scientific ethics and integrity begins work. EOS 92(47): 22. Guidelines for responsible conduct of research. http://www.provost.pitt.edu/documents/GUIDELINES FOR ETHICAL PRACTICES IN RESEARCH-FINALrevised2-March 2011.pdf

  8. Mapping a New Field: Cross-Border Professional Development for Teachers

    ERIC Educational Resources Information Center

    Johnson, Janelle M.

    2011-01-01

    Many of the international, supranational, national, and grassroots development organizations working in the field of education channel their efforts into capacity-building for teachers. My research examines the nexus of such international development by US-based organizations with national schooling systems by naming and theorizing this process as…

  9. 75 FR 60377 - Financial Crimes Enforcement Network; Cross-Border Electronic Transmittals of Funds

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-30

    ... expert assistance in the identification and analysis of relevant issues, recommendations about the focus... upon the experience of the Australian Transaction Reports and Analysis Centre (AUSTRAC) and the Financial Transactions Reports and Analysis Centre (FINTRAC), FinCEN's counterpart financial...

  10. Degrees of Doubt? Towards Eradicating Fraudulent Cross-Border Institutions and Diplomas

    ERIC Educational Resources Information Center

    Observatory on Borderless Higher Education, 2010

    2010-01-01

    Six higher education institutions in Singapore and four universities in New Zealand have reportedly been placed on a list of unaccredited institutions and so-called "degree mills", which has been compiled by the Office of Degree Authorisation of the state of Oregon in the United States (US). As one of the first US states that introduced…

  11. Crossing Borders: Adding Cultural Diversity to Music Education Expands Horizons for All

    ERIC Educational Resources Information Center

    Robinson, Matt

    2010-01-01

    Thanks to technology and modern conveniences, the world continues to become a smaller place, while communities become more diverse. At the same time, it's becoming easier to learn about the world's many cultures, to appreciate their unique qualities, to understand their significance--and their fragility. For music teachers with wide-ranging…

  12. Curricular Joint Ventures: A New Chapter in US Cross-Border Education?

    ERIC Educational Resources Information Center

    Eckel, Peter D.; Green, Madeleine F.; Affolter-Caine, Britany

    2004-01-01

    For universities in industrialized nations such as the United States, globalization poses relatively little threat and offers many benefits. This article identifies and describes one trend emerging from globalization--how American colleges and universities are leveraging their curricula internationally through joint ventures between universities…

  13. Crossing Borders: The Linguistic Practices of Aspiring Bilinguals in the Malay Community

    ERIC Educational Resources Information Center

    Rajadurai, Joanne

    2011-01-01

    This paper reports on a study of Malay learners of English in Malaysia as they attempt to extend their use of English outside the classroom and thus participate in new linguistic practices. Using a multiple case study approach, the study examines the narrative accounts of learners generated through student journals and focus group discussions.…

  14. Immigration Narratives in Young Adult Literature: Crossing Borders. Scarecrow Studies in Young Adult Literature

    ERIC Educational Resources Information Center

    Brown, Joanne

    2010-01-01

    Although the United States prides itself as a nation of diversity, the country that boasts of its immigrant past also wrestles with much of its immigrant present. While conflicting attitudes about immigration are debated, newcomers--both legal and otherwise--continue to arrive on American soil. And books about the immigrant experience--aimed at…

  15. Campus Custodians in the Corporate University: Castes, Crossing Borders, and Critical Consciousness

    ERIC Educational Resources Information Center

    Magolda, Peter; Delman, Liliana

    2016-01-01

    This ethnographic study showcases life stories of campus custodians and their interactions with members of other campus subcultures to reveal insights about higher education. This manuscript illuminates the ways the worldwide economic calamities, beginning in 2008, resulted in the implementation of corporate-like ideologies. Analyses reveal how…

  16. Cross-Border Quest: The Reality and Legality of Transplant Tourism

    PubMed Central

    Ambagtsheer, Frederike; Zaitch, Damián; van Swaaningen, René; Duijst, Wilma; Zuidema, Willij; Weimar, Willem

    2012-01-01

    Background. Transplant tourism is a phenomenon where patients travel abroad to purchase organs for transplants. This paper presents the results of a fieldwork study by describing the experiences of Dutch transplant professionals confronted by patients who allegedly purchased kidney transplants abroad. Second, it addresses the legal definition and prohibition of transplant tourism under national and international law. The final part addresses the legal implications of transplant tourism for patients and physicians. Methods. The study involved seventeen interviews among transplant physicians, transplant coordinators and policy-experts and a review of national and international legislation that prohibit transplant tourism. Results. All Dutch transplant centers are confronted with patients who undergo transplants abroad. The estimated total number is four per year. Transplant tourism is not explicitly defined under national and international law. While the purchase of organs is almost universally prohibited, transplant tourism is hardly punishable because national laws generally do not apply to crimes committed abroad. Moreover, the purchase of organs (abroad) is almost impossible to prove. Conclusions. Transplant tourism is a legally complex phenomenon that warrants closer research and dialogue. The legal rights and obligations of patients and physicians confronted with transplant tourism should be clarified. PMID:22655168

  17. Crossing Borders: High School Science Teachers Learning to Teach the Specialized Language of Science

    ERIC Educational Resources Information Center

    Patrick, Jennifer Drake

    2009-01-01

    The highly specialized language of science is both challenging and alienating to adolescent readers. This study investigated how secondary science teachers learn to teach the specialized language of science in their classrooms. Three research questions guided this study: (a) what do science teachers know about teaching reading in science? (b) what…

  18. Crossing Borders and Blurring Boundaries: Early Childhood Practice in a Non-Western Setting

    ERIC Educational Resources Information Center

    Lewis, Trish; Macfarlane, Kym; Nobel, Karen; Stephenson, Amy

    2006-01-01

    This paper examines the educational and epistemological implications for early childhood practitioners who work in non-Western environments. Predominantly, early childhood knowledge is strongly driven by the metanarrative of child development, which can prove problematic for practitioners working in non-Western settings. Practitioners who draw…

  19. Back to the UK Future: Trends in Internationalism and Cross-Border Higher Education

    ERIC Educational Resources Information Center

    Olcott, Don

    2009-01-01

    Globalisation is transforming the international marketplace and accelerating unprecedented socio-economic, cultural, social, political and educational change across the globe. This global transformation has served as a catalyst for increasing deliberation, dialogue and consensus among government, business and higher education to create, attract…

  20. Cross-border quest: the reality and legality of transplant tourism.

    PubMed

    Ambagtsheer, Frederike; Zaitch, Damián; van Swaaningen, René; Duijst, Wilma; Zuidema, Willij; Weimar, Willem

    2012-01-01

    Background. Transplant tourism is a phenomenon where patients travel abroad to purchase organs for transplants. This paper presents the results of a fieldwork study by describing the experiences of Dutch transplant professionals confronted by patients who allegedly purchased kidney transplants abroad. Second, it addresses the legal definition and prohibition of transplant tourism under national and international law. The final part addresses the legal implications of transplant tourism for patients and physicians. Methods. The study involved seventeen interviews among transplant physicians, transplant coordinators and policy-experts and a review of national and international legislation that prohibit transplant tourism. Results. All Dutch transplant centers are confronted with patients who undergo transplants abroad. The estimated total number is four per year. Transplant tourism is not explicitly defined under national and international law. While the purchase of organs is almost universally prohibited, transplant tourism is hardly punishable because national laws generally do not apply to crimes committed abroad. Moreover, the purchase of organs (abroad) is almost impossible to prove. Conclusions. Transplant tourism is a legally complex phenomenon that warrants closer research and dialogue. The legal rights and obligations of patients and physicians confronted with transplant tourism should be clarified. PMID:22655168

  1. The interconnected and cross-border nature of risks posed by infectious diseases.

    PubMed

    Suk, Jonathan E; Van Cangh, Thomas; Beauté, Julien; Bartels, Cornelius; Tsolova, Svetla; Pharris, Anastasia; Ciotti, Massimo; Semenza, Jan C

    2014-01-01

    Infectious diseases can constitute public health emergencies of international concern when a pathogen arises, acquires new characteristics, or is deliberately released, leading to the potential for loss of human lives as well as societal disruption. A wide range of risk drivers are now known to lead to and/or exacerbate the emergence and spread of infectious disease, including global trade and travel, the overuse of antibiotics, intensive agriculture, climate change, high population densities, and inadequate infrastructures, such as water treatment facilities. Where multiple risk drivers interact, the potential impact of a disease outbreak is amplified. The varying temporal and geographic frequency with which infectious disease events occur adds yet another layer of complexity to the issue. Mitigating the emergence and spread of infectious disease necessitates mapping and prioritising the interdependencies between public health and other sectors. Conversely, during an international public health emergency, significant disruption occurs not only to healthcare systems but also to a potentially wide range of sectors, including trade, tourism, energy, civil protection, transport, agriculture, and so on. At the same time, dealing with a disease outbreak may require a range of critical sectors for support. There is a need to move beyond narrow models of risk to better account for the interdependencies between health and other sectors so as to be able to better mitigate and respond to the risks posed by emerging infectious disease. PMID:25308818

  2. Crossing borders: High school science teachers learning to teach the specialized language of science

    NASA Astrophysics Data System (ADS)

    Patrick, Jennifer Drake

    The highly specialized language of science is both challenging and alienating to adolescent readers. This study investigated how secondary science teachers learn to teach the specialized language of science in their classrooms. Three research questions guided this study: (a) what do science teachers know about teaching reading in science? (b) what understanding about the unique language demands of science reading do they construct through professional development? and (c) how do they integrate what they have learned about these specialized features of science language into their teaching practices? This study investigated the experience of seven secondary science teachers as they participated in a professional development program designed to teach them about the specialized language of science. Data sources included participant interviews, audio-taped professional development sessions, field notes from classroom observations, and a prior knowledge survey. Results from this study suggest that science teachers (a) were excited to learn about disciplinary reading practices, (b) developed an emergent awareness of the specialized features of science language and the various genres of science writing, and (c) recognized that the challenges of science reading goes beyond vocabulary. These teachers' efforts to understand and address the language of science in their teaching practices were undermined by their lack of basic knowledge of grammar, availability of time and resources, their prior knowledge and experiences, existing curriculum, and school structure. This study contributes to our understanding of how secondary science teachers learn about disciplinary literacy and apply that knowledge in their classroom instruction. It has important implications for literacy educators and science educators who are interested in using language and literacy practices in the service of science teaching and learning. (Full text of this dissertation may be available via the University of Florida Libraries web site. Please check http://www.uflib.ufl.edu/etd.html)

  3. Immigrant Mothers Crossing Borders: Nomadic Identities and Multiple Belongings in Early Childhood Education

    ERIC Educational Resources Information Center

    Vandenbroeck, Michel; Roets, Griet; Snoeck, Aisja

    2009-01-01

    In a small-scale study we analyse the narratives of three recently-arrived immigrant mothers with young children, making use of child care. Drawing on post-foundational theories and third-wave feminism, the analysis of these narratives enables us to look at how issues of diversity, democracy and citizenship are shaped in micro-events of daily…

  4. Crossing borders between social and physical sciences in post-event investigations

    NASA Astrophysics Data System (ADS)

    Ruin, I.; Gruntfest, E.; Lutoff, C.; Anquetin, S.; Scolobig, A.; Creutin, J.-D.; Borga, M.

    2009-04-01

    In natural hazard research social and physical scientists tend to approach post-event investigations within their narrow disciplinary lenses. Efforts that are called trans-disciplinary often add social science but do not integrate it effectively. For example, an economist might be brought in to address a question of "value" without any understanding or interest in the context in which the value will be applied (e.g., Merrell et al. 2002, Simmons and Sutter 2005). At the same time, social scientists would benefit from some knowledge of geology, meteorology, hydrology, forecasting operations, and hazard detection systems in order, for instance, to understand the nature and types of uncertainty in the physical systems. Proactive partnership between social and physical scientists in post-event investigations needs a background knowledge and a preparation about several issues from both sides. Moreover neither physical nor social scientists necessarily understand and appreciate the contributions that they can reciprocally bring to their works. Post-event collaborations between social and physical science are rare. The few examples of multi-disciplinary work, when examined closely, are not integrated collaborative projects but patchwork quilts of a variety of specialists taking separate aspects of an issue. There are examples where social scientists and engineers are engaged in one project, but the efforts tend to include social scientists as an "add on" to an existing physical science investigation. In this way, true integration of information, data and knowledge from different fields is lacking and the result is that neither the physical nor the social science perspectives gain a comprehensive picture of the issue under scrutiny. Looking at the flash flood problem, the atmospheric and hydrological generating mechanisms of the phenomenon are poorly understood, leading to highly uncertain forecasts of and warnings for these events. On the other hand warning and crisis response to such violent and fast events is not a straightforward process. In both the social and physical aspect of the problem, space and time scales involved either in hydro-meteorology, human behavior and social organizations sciences are of crucial importance. Interdisciplinary collaboration is particularly important here because those involved with such events, including scholars, hydrologists, meteorologists, road users, emergency managers and civil security services, all have different time and space frameworks that they use for decision-making, forecasting, warnings and research. This presentation will show examples of original findings that emerged from a successful collaboration among different scientific disciplines. Working with geophysical scientists drives us to analyze social data from a different angle, integrating time and space scales as they are used to do in hydrometeorological research. This comprehensive, coupled natural—human system approach over time and space is rarely used but it has been shown to be especially pertinent to integrate social and physical components of the flash flood risk. (Ruin et al., 2008, Ruin et al., 2009, Creutin et al., 2009). Based on these examples we propose to develop a new network, DELUGE (Disasters Evolving Lessons Using Global Experience), to address trans-disciplinary efforts and capacity building related to post-disaster field techniques to change the post-event field experience enterprise and assure that practitioners, forecasters, researchers, students, and others learn from experience to reduce losses. DELUGE is an interdisciplinary, international network aimed at developing a sustainable community of meteorologists, hydrologists, geographers, anthropologists, engineers, planners, economists, and sociologists working together to create a set of guidelines for post-disaster investigations to reduce losses from short-fuse flood events, particularly flash floods, debris flows and landslides (hereafter termed flash floods). Flash-floods, debris flows, and landslides often develop at sp

  5. Self-Emergent Peer Support Using Online Social Networking during Cross-Border Transition

    ERIC Educational Resources Information Center

    Ding, Feng; Stapleton, Paul

    2015-01-01

    Transitioning from school to university is a major development for learners, often accompanied by difficulties. When overseas students arrive at university for the first time these challenges are multiplied. It is suggested, however, that these difficulties can be mitigated to a certain extent via the use of online social networks. The present…

  6. Crossing Borders with Literature of Diversity. The Bill Harp Professional Teachers Series.

    ERIC Educational Resources Information Center

    Corliss, Julia Candace

    The purpose of this book is to be a practical tool for those who work with children in grades 4-6 and who wish to make an equitable literature curriculum part of the school-centered reading experiences of the children with whom they work, as well as introduce literature of diversity into their own reading. It is especially meant to provide a…

  7. 77 FR 41213 - Cross-Border Application of Certain Swaps Provisions of the Commodity Exchange Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-12

    ... structured investment vehicles (``SIVs'') to shift certain activities off balance sheets and manage both... Participant'' and ``Eligible Contract Participant''; Final Rule, 77 FR 30596, May 23, 2012. Section III sets... No. 33-6863, 55 FR 18306, May 2, 1990. Q1c. As an alternative to the proposed interpretation of...

  8. The Cross-Border Education Policy Context: Educational Hubs, Trade Liberalization, and National Sovereignty

    ERIC Educational Resources Information Center

    Lane, Jason E.; Kinser, Kevin

    2011-01-01

    International branch campuses (IBCs) operate in national and international policy environments that are still rapidly evolving. While IBCs have been operating for several decades, most of that time they have operated below the domestic regulatory radar of either the exporting (home) or importing (host) governments. As the number of such…

  9. Transcultural Digital Literacies: Cross-Border Connections and Self-Representations in an Online Forum

    ERIC Educational Resources Information Center

    Kim, Grace MyHyun

    2016-01-01

    Research on multicultural learning has focused on formal and local settings, such as schools, but young people are interacting with, and therefore learning from, informal settings and nonlocal contexts, including online platforms. That is, multicultural education is no longer limited to formal institutions, local contexts, or the printed word.…

  10. Structural and geographical analysis of cross-border three-member areas

    NASA Astrophysics Data System (ADS)

    Baklanov, P. Ya.; Novikov, A. N.; Ptitsyn, A. B.

    2016-05-01

    A specific geographical structure identified at the junction point of the borders of three countries is characterized by a radial symmetry in the distribution of areas with varying degrees of nature management restrictions, which get tougher closer to the junction. The special protection areas are located in the junction point of the borders.

  11. Hmong American women crossing borders in nursing education: two case studies.

    PubMed

    Yang, Avonne A; Morris, Tama L

    2011-05-01

    The Hmong population in the United States is rapidly growing. Cultural differences between this population and the American health care system lead to health disparities. These differences are exacerbated by the shortage of Hmong American nurses. The shortage may be related to difficulty in navigating the U.S. education system. The purpose of this study was to examine the perceived impact of Hmong culture on Hmong American women's nursing education. Data analysis identified four themes that were confirmed by participants: support factors, entrepreneurism, positive outcomes, and cultural expectations. On the basis of these themes, schools of nursing can positively influence Hmong American women's education by providing information sessions for their families regarding school expectations, allowing flexibility in meeting course requirements, increasing the number of Hmong and minority faculty members, and providing language assessment and support programs for English language learners. PMID:21323253

  12. 75 FR 43225 - Finding of No Significant Impact: San Diego-Tijuana Airport Cross Border Facility

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-23

    ... public notice of the draft EA in the Federal Register, 74 FR 68906 (December 29, 2009), and invited... be required. Construction: Minimizing equipment and truck idling Recycling construction waste and... Utilizing Energy Star appliances and light fixtures/ sensors Implementing a recycling program for...

  13. Crossing Borders: Reflections on the Professional Journey of a Teacher Educator in Diaspora

    ERIC Educational Resources Information Center

    Amobi, Funmi A.

    2004-01-01

    Teacher education programs endeavor to prepare pre-service teachers to teach in culturally diverse classrooms. These days, the canon of the teacher education field includes more than cursory attention to cultural diversity: the aspiration of sensitizing the awareness of neophytes to the variegated dimensions of diversity which define their…

  14. Developing an Intercultural Competence Programme at an International Cross-Border University

    ERIC Educational Resources Information Center

    Hiller, Gundula Gwenn; Wozniak, Maja

    2009-01-01

    The European University Viadrina located on the German-Polish border, with a high number of international students, was founded to promote the "growing-together" of Europe. Despite those aims, it is becoming more evident that international institutions must develop special strategies to sensitize their members on an intercultural level and to…

  15. Community participation of cross-border migrants for primary health care in Thailand.

    PubMed

    Sirilak, Supakit; Okanurak, Kamolnetr; Wattanagoon, Yupaporn; Chatchaiyalerk, Surut; Tornee, Songpol; Siri, Sukhontha

    2013-09-01

    This is the first report of the large-scale utilization of migrants as health volunteers in a migrant primary-healthcare program. The program recruited migrants who volunteered to serve their communities. This study explores the identities of these volunteers, their relationship with program management, and their attitudes. The study also investigates the impact of the volunteers, from the migrants' and healthcare workers' perspective. The study was conducted in two provinces, Tak (northern Thailand) and Samut Sakhon (central Thailand). Primary and secondary information was collected. Mixed methods, comprising in-depth interviews, observation and questionnaires, were used to gather primary data from three groups of participants-migrant volunteers, migrants and healthcare workers. Secondary data, and in-depth interviews with healthcare workers, showed that migrant volunteers made a significant contribution to the provision of both preventive and curative services. The quantitative study covered 260 migrant volunteers and 446 migrants. The results found that <5% of volunteers were selected by the community. Almost all attended a training course. Most were assigned to be health communicators; four stated they did nothing. Volunteers' attitudes were very positive. Most migrants reported that the volunteers' work was useful. It was concluded that the migrant health-volunteer program did help deal with migrant health problems. However, management of the program should be closely considered for more effective outcomes. PMID:23132916

  16. Effects of Cultural Assimilation in a Cross-Border M&A

    NASA Astrophysics Data System (ADS)

    Ito, Satoshi; Tamiya, Toshihiko; Fujimura, Shuzo

    2010-06-01

    This paper examines a merger of two companies with respect to the assimilation of corporate culture differences, particularly quality culture. The study aims to clarify the root cause of declines in quality ratings from customers after a merger despite maintaining products and services as they were before the merger, and whether cultural differences affect decision-making in a newly merged company. Examination is reported of the relationship between actions taken to assimilate quality culture and the resulting quality ratings given by customers, and analyzed is the time required to address quality incidents and the progress of cultural assimilation. A total of 301 incidents in the 5 years after a merger were analyzed, focusing on the time required to resolve the incidents. These empirical analyses reveal that the extent of cultural assimilation is associated with the speed of organizational decision-making and affects the quality ratings given by customers.

  17. Importing the Poor: Welfare Magnetism and Cross-Border Welfare Migration.

    PubMed

    McKinnish, Terra

    2005-12-21

    I test for welfare-induced migration by comparing AFDC participation in border counties to interior counties in the same state. If migration costs are lower for border county residents, border counties on the high-benefit side of a state border should have higher welfare participation relative to the state's interior counties. Border counties on the low-benefit side should have lower welfare participation relative to the state's interior counties. The results obtained using county-level data from 1970-90 indicate that having a neighbor with benefits that are $100 lower increases AFDC expenditures in border counties by 4.0-6.8 percent relative to interior counties. PMID:21949446

  18. Importing the Poor: Welfare Magnetism and Cross-Border Welfare Migration

    ERIC Educational Resources Information Center

    Journal of Human Resources, 2005

    2005-01-01

    A study of the welfare programs in two counties bordering different states along with comparative welfare expenditure in interior counties tests the theory that Aid for Families with Dependent Children (AFDC) recipients migrate to counties which have a higher per capita welfare budget. Research shows that border counties with a $100 differential…

  19. Crossing Borders: New Teachers Co-Constructing Professional Identity in Performative Times

    ERIC Educational Resources Information Center

    Wilkins, Chris; Busher, Hugh; Kakos, Michalis; Mohamed, Carmen; Smith, Joan

    2012-01-01

    This paper draws on a range of theoretical perspectives on the construction of new teachers' professional identity. It focuses particularly on the impact of the development in many national education systems of a performative culture of the management and regulation of teachers' work. Whilst the role of interactions with professional colleagues…

  20. Cross-border research on human embryonic stem cells: legal and ethical considerations.

    PubMed

    Mertes, Heidi; Pennings, Guido

    2009-03-01

    Although stem cell research is a field that stands to benefit a lot from international cooperation, collaboration between scientists of different countries is hampered by the great divergence in national stem cell legislations. More specifically, researchers from countries with restrictive stem cell policies find themselves unable to participate in international research or attend meetings or workshops in more permissive environments as they fear being prosecuted in their home country for activities that are deemed acceptable abroad. Juridical clarity on this subject is long overdue. Legally, extraterritorial jurisdiction based on the nationality principle does not conflict with international law. However, invoking this principle to prosecute stem cell researchers would constitute a breach with the current custom to limit extraterritorial jurisdiction to exceptional crimes or circumstances. On the ethical front, legislators have an obligation towards their constituents to protect them from harm through the criminal justice system, but at the same time they should be wary of legal moralism and of jeopardising freedom of research. Researchers on their part cannot simply ignore the law whenever it deviates from their personal moral opinions, but they are not acting unethically if they perform research that they esteem to be ethically justified where it is also legally accepted. Allowing researchers to work freely abroad-within the jurisdiction of the host country-is a way for legislator and researcher to show respect for each other's different moral values and to balance their rights and obligations towards each other. PMID:19052926

  1. Legitimacy in Cross-Border Higher Education: Identifying Stakeholders of International Branch Campuses

    ERIC Educational Resources Information Center

    Farrugia, Christine A.; Lane, Jason E.

    2013-01-01

    When colleges and universities set up outposts such as international branch campuses (IBCs) in foreign countries, the literature suggests that the success of that outpost can be tied to its ability to build its own legitimacy. This article investigates the process of legitimacy building by IBCs through identifying who IBCs view as their salient…

  2. Crossing Borders by "Walking Around" Culture: Ethnographic Reflections on Teacher Preparation

    ERIC Educational Resources Information Center

    Sparapani, Ervin F.; Seo, Byung-In; Smith, Deborah L.

    2012-01-01

    The United Nations Educational, Scientific, and Cultural Organization (UNESCO) documents that the world has become increasingly multicultural and multilingual as international migration rates grow each year. The cultural and language diversity in the United States exemplifies this worldwide phenomenon. It is the authors' belief that teachers have…

  3. Crossing Borders in a Media Driven Age: The Rise of "PRolicy."

    ERIC Educational Resources Information Center

    Lugg, Catherine A.

    This paper analyzes the rise of "PRolicy" (Public Relations public policy) by examining the first Reagan Administration and its use of media manipulation. The paper also explores how PRolicy influences educational policy. It draws on a two-pronged methodological approach that involved media analysis and historical policy analysis with a focus on…

  4. Crossing Borders: Evaluating a Work Integrated Learning Project Involving Australian and Vietnamese Students

    ERIC Educational Resources Information Center

    Welch, Bernadette; Vo-Tran, Huan; Pittayachawan, Siddhi; Reynolds, Sue

    2012-01-01

    The value of work integrated learning (WIL) is well-established in the education of information management (IM) professionals. Adding value to WIL through cross-cultural or cross-disciplinary experiences is considered in this article. Using online communication, simulation activities, and onsite work, students from RMIT Melbourne and RMIT Ho Chi…

  5. U.S.Mexico cross-border workforce training needs:survey implementation

    PubMed Central

    Rosales, Cecilia B.; Nuno, Tomas; Dieke, Ada; Galvez, Francisco Navarro; Dutton, Ronald J.; Guerrero, Robert; Dulin, Paul; Jiménez, Elisa Aguilar; Granillo, Brenda; de Zapien, Jill Guernsey

    2011-01-01

    Abstract: Background: Since the tragic events experienced on September 11, 2001, and other recent events such as the hurricane devastation in the southeastern parts of the country and the emergent H1N1season, the need for a competent public health workforce has become vitally important for securing and protecting the greater population. Objective: The primary objective of the study was to assess the training needs of the U.S. Mexico border states public health workforce. Methods: The Arizona Center for Public Health Preparedness of the Mel and Enid Zuckerman College of Public Health at The University of Arizona implemented a border-wide needs assessment. The online survey was designed to assess and prioritize core public health competencies as well as bioterrorism, infectious disease, and border/binational training needs. Results: Approximately 80% of the respondents were employed by agencies that serve both rural and urban communities. Respondents listed 23 different functional roles that best describe their positions. Approximately 35% of the respondents were primarily employed by state health departments, twenty-seven percent (30%) of the survey participants reported working at the local level, and 19% indicated they worked in other government settings (e.g. community health centers and other non-governmental organizations). Of the 163 survey participants, a minority reported that they felt they were well prepared in the Core Bioterrorism competencies. The sections on Border Competency, Surveillance/Epidemiology, Communications/Media Relations and Cultural Responsiveness, did not generate a rating of 70% or greater on the importance level of survey participants. Conclusions: The study provided the opportunity to examine the issues of public health emergency preparedness within the framework of the border as a region addressing both unique needs and context. The most salient findings highlight the need to enhance the border competency skills of individuals whose roles include a special focus on emergency preparedness and response along the US-Mexico border. PMID:21483208

  6. Identity and Cross-Border Student Mobility: The Mainland China-Hong Kong Experience

    ERIC Educational Resources Information Center

    Xu, Cora Lingling

    2015-01-01

    This article is drawn from research in an ongoing multiple case study of the identity constructions of tertiary-level border-crossing students from mainland China to Hong Kong. It begins by outlining the contextual and conceptual background of the study, followed by the presentation and discussion of the three aspects of identity being…

  7. Ageing in Changing Community Contexts: Cross-Border Perspectives from Rural Ireland and Northern Ireland

    ERIC Educational Resources Information Center

    Walsh, Kieran; O'Shea, Eamon; Scharf, Thomas; Murray, Michael

    2012-01-01

    Ongoing demographic, social, economic and cultural changes point to the dynamic and continually changing contexts of rural areas in Ireland and Northern Ireland. However, the influence of such changes on the lives of older people remains under-explored, particularly the question of how older people perceive, connect to and engage in their…

  8. Cross-border transport of rescue dogs may spread rabies in Europe

    PubMed Central

    Klevar, S.; Høgåsen, H. R.; Davidson, R. K.; Hamnes, I. S.; Treiberg Berndtsson, L.; Lund, A.

    2015-01-01

    Harmonisation of regulations in the European Union and the European Economic Area, as of January 1, 2012, has led to an increase in the number of rescue dogs imported to Norway from Eastern European countries, in particular Romania. Today the only requirements for dogs entering Norway are rabies vaccination and prophylactic Echinococcus multilocularis treatment. The aim of this study was to investigate the antibody levels to rabies virus in vaccinated rescue dogs and to examine if the dogs had sufficient antibody response according to the recommended titre ≥0.5 IU/ml by the World Organisation for Animal Health (OIE). A significant proportion (53%, 95% CI (41% to 65%)) of imported rescue dogs from Eastern Europe were found to have inadequate titres after rabies vaccination. Moreover, 41 per cent of the dogs had antibody levels below or equal to 0.2 IU/ml, and among these, 14 dogs had titres ≤0.1 IU/ml, which is considered negative in the fluorescent antibody virus neutralisation assay. This study indicates that the present regulation increases the risk of introducing rabies from member states where rabies is still prevalent to countries considered free from rabies. PMID:26113337

  9. Crossing Borders by "Walking around" Culture: Three Ethnographic Reflections on Teacher Preparation

    ERIC Educational Resources Information Center

    Sparapani, Ervin F.; Seo, Byung-In; Smith, Deborah L.

    2011-01-01

    The United States of the twenty-first century is possibly the most culturally/racially diverse country of any nation in history, and families that are culturally/racially different from mainstream society do not always see that schools are meeting the needs of their children. This diversity in culture and language means that each person is…

  10. Children Crossing Borders: School Visits as Initial Incorporation Rites in Transition to Preschool Class

    ERIC Educational Resources Information Center

    Ackesjö, Helena

    2013-01-01

    Most research about transition in educational settings describes how children enter into new contexts, especially transition from preschool to school. However, the overall research focus in this article is to gain knowledge about how the transition process can be characterized at the end of the preschool period before the actual transition. The…

  11. Crossing Borders in Literacy and Science Instruction: Perspectives on Theory and Practice

    ERIC Educational Resources Information Center

    Saul, E. Wendy

    2004-01-01

    This collection brings together the best minds in education to explore the literacy-science connection and to reduce the lack of understanding between the science and humanities communities. The articles cover a range of topics and perspectives, from quasitheoretical pieces and literature reviews to case studies and evaluations of particular…

  12. Globalisation and Higher Education: From Within-Border to Cross-Border

    ERIC Educational Resources Information Center

    Youssef, Leïla

    2014-01-01

    Globalisation, the shift to a knowledge economy, and changing demographics are increasingly challenging higher education systems. The move from elite through mass to universal education, coupled with the internationalisation of higher education, has profoundly influenced the system, especially in terms of academic mobility. It has created new…

  13. Localized Quality Assurance and Certification for Cross-Border Education: A Shanghai Case Study

    ERIC Educational Resources Information Center

    Yadong, Li; Yanqiao, Jiang

    2009-01-01

    The authors present a case study of Sino-foreign cooperation in education to illustrate how developments in the management of licensing and the approval of programs can contribute to better quality assurance. The study demonstrates how the Shanghai municipal education authority has jettisoned traditional dependence on administrative management and…

  14. The interconnected and cross-border nature of risks posed by infectious diseases

    PubMed Central

    Suk, Jonathan E.; Van Cangh, Thomas; Beauté, Julien; Bartels, Cornelius; Tsolova, Svetla; Pharris, Anastasia; Ciotti, Massimo; Semenza, Jan C.

    2014-01-01

    Infectious diseases can constitute public health emergencies of international concern when a pathogen arises, acquires new characteristics, or is deliberately released, leading to the potential for loss of human lives as well as societal disruption. A wide range of risk drivers are now known to lead to and/or exacerbate the emergence and spread of infectious disease, including global trade and travel, the overuse of antibiotics, intensive agriculture, climate change, high population densities, and inadequate infrastructures, such as water treatment facilities. Where multiple risk drivers interact, the potential impact of a disease outbreak is amplified. The varying temporal and geographic frequency with which infectious disease events occur adds yet another layer of complexity to the issue. Mitigating the emergence and spread of infectious disease necessitates mapping and prioritising the interdependencies between public health and other sectors. Conversely, during an international public health emergency, significant disruption occurs not only to healthcare systems but also to a potentially wide range of sectors, including trade, tourism, energy, civil protection, transport, agriculture, and so on. At the same time, dealing with a disease outbreak may require a range of critical sectors for support. There is a need to move beyond narrow models of risk to better account for the interdependencies between health and other sectors so as to be able to better mitigate and respond to the risks posed by emerging infectious disease. PMID:25308818

  15. Measurement of tbar{t} production with a veto on additional central jet activity in pp collisions at √{s}=7 TeV using the ATLAS detector

    NASA Astrophysics Data System (ADS)

    Aad, G.; Abbott, B.; Abdallah, J.; Abdel Khalek, S.; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Acerbi, E.; Acharya, B. S.; Adamczyk, L.; Adams, D. L.; Addy, T. N.; Adelman, J.; Aderholz, M.; Adomeit, S.; Adragna, P.; Adye, T.; Aefsky, S.; Aguilar-Saavedra, J. A.; Aharrouche, M.; Ahlen, S. P.; Ahles, F.; Ahmad, A.; Ahsan, M.; Aielli, G.; Akdogan, T.; Åkesson, T. P. A.; Akimoto, G.; Akimov, A. V.; Akiyama, A.; Alam, M. S.; Alam, M. A.; Albert, J.; Albrand, S.; Aleksa, M.; Aleksandrov, I. N.; Alessandria, F.; Alexa, C.; Alexander, G.; Alexandre, G.; Alexopoulos, T.; Alhroob, M.; Aliev, M.; Alimonti, G.; Alison, J.; Aliyev, M.; Allbrooke, B. M. M.; Allport, P. P.; Allwood-Spiers, S. E.; Almond, J.; Aloisio, A.; Alon, R.; Alonso, A.; Alvarez Gonzalez, B.; Alviggi, M. G.; Amako, K.; Amaral, P.; Amelung, C.; Ammosov, V. V.; Amorim, A.; Amorós, G.; Amram, N.; Anastopoulos, C.; Ancu, L. S.; Andari, N.; Andeen, T.; Anders, C. F.; Anders, G.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Andrieux, M.-L.; Anduaga, X. S.; Angerami, A.; Anghinolfi, F.; Anisenkov, A.; Anjos, N.; Annovi, A.; Antonaki, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoun, S.; Aperio Bella, L.; Apolle, R.; Arabidze, G.; Aracena, I.; Arai, Y.; Arce, A. T. H.; Arfaoui, S.; Arguin, J.-F.; Arik, E.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnal, V.; Arnault, C.; Artamonov, A.; Artoni, G.; Arutinov, D.; Asai, S.; Asfandiyarov, R.; Ask, S.; Åsman, B.; Asquith, L.; Assamagan, K.; Astbury, A.; Aubert, B.; Auge, E.; Augsten, K.; Aurousseau, M.; Avolio, G.; Avramidou, R.; Axen, D.; Ay, C.; Azuelos, G.; Azuma, Y.; Baak, M. A.; Baccaglioni, G.; Bacci, C.; Bach, A. M.; Bachacou, H.; Bachas, K.; Backes, M.; Backhaus, M.; Badescu, E.; Bagnaia, P.; Bahinipati, S.; Bai, Y.; Bailey, D. C.; Bain, T.; Baines, J. T.; Baker, O. K.; Baker, M. D.; Baker, S.; Banas, E.; Banerjee, P.; Banerjee, Sw.; Banfi, D.; Bangert, A.; Bansal, V.; Bansil, H. S.; Barak, L.; Baranov, S. P.; Barashkou, A.; Barbaro Galtieri, A.; Barber, T.; Barberio, E. L.; Barberis, D.; Barbero, M.; Bardin, D. Y.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnett, B. M.; Barnett, R. M.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Barrillon, P.; Bartoldus, R.; Barton, A. E.; Bartsch, V.; Bates, R. L.; Batkova, L.; Batley, J. R.; Battaglia, A.; Battistin, M.; Bauer, F.; Bawa, H. S.; Beale, S.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Becker, S.; Beckingham, M.; Becks, K. H.; Beddall, A. J.; Beddall, A.; Bedikian, S.; Bednyakov, V. A.; Bee, C. P.; Begel, M.; Behar Harpaz, S.; Behera, P. K.; Beimforde, M.; Belanger-Champagne, C.; Bell, P. J.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellina, F.; Bellomo, M.; Belloni, A.; Beloborodova, O.; Belotskiy, K.; Beltramello, O.; Benary, O.; Benchekroun, D.; Bendel, M.; Bendtz, K.; Benekos, N.; Benhammou, Y.; Benhar Noccioli, E.; Benitez Garcia, J. A.; Benjamin, D. P.; Benoit, M.; Bensinger, J. R.; Benslama, K.; Bentvelsen, S.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Berglund, E.; Beringer, J.; Bernat, P.; Bernhard, R.; Bernius, C.; Berry, T.; Bertella, C.; Bertin, A.; Bertinelli, F.; Bertolucci, F.; Besana, M. I.; Besson, N.; Bethke, S.; Bhimji, W.; Bianchi, R. M.; Bianco, M.; Biebel, O.; Bieniek, S. P.; Bierwagen, K.; Biesiada, J.; Biglietti, M.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biscarat, C.; Bitenc, U.; Black, K. M.; Blair, R. E.; Blanchard, J.-B.; Blanchot, G.; Blazek, T.; Blocker, C.; Blocki, J.; Blondel, A.; Blum, W.; Blumenschein, U.; Bobbink, G. J.; Bobrovnikov, V. B.; Bocchetta, S. S.; Bocci, A.; Boddy, C. R.; Boehler, M.; Boek, J.; Boelaert, N.; Bogaerts, J. A.; Bogdanchikov, A.; Bogouch, A.; Bohm, C.; Bohm, J.; Boisvert, V.; Bold, T.; Boldea, V.; Bolnet, N. M.; Bomben, M.; Bona, M.; Bondarenko, V. G.; Bondioli, M.; Boonekamp, M.; Booth, C. N.; Bordoni, S.; Borer, C.; Borisov, A.; Borissov, G.; Borjanovic, I.; Borri, M.; Borroni, S.; Bortolotto, V.; Bos, K.; Boscherini, D.; Bosman, M.; Boterenbrood, H.; Botterill, D.; Bouchami, J.; Boudreau, J.; Bouhova-Thacker, E. V.; Boumediene, D.; Bourdarios, C.; Bousson, N.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozhko, N. I.; Bozovic-Jelisavcic, I.; Bracinik, J.; Braem, A.; Branchini, P.; Brandenburg, G. W.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Brelier, B.; Bremer, J.; Brendlinger, K.; Brenner, R.; Bressler, S.; Britton, D.; Brochu, F. M.; Brock, I.; Brock, R.; Brodbeck, T. J.; Brodet, E.; Broggi, F.; Bromberg, C.; Bronner, J.; Brooijmans, G.; Brooks, W. K.; Brown, G.; Brown, H.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Brunet, S.; Bruni, A.; Bruni, G.; Bruschi, M.; Buanes, T.; Buat, Q.; Bucci, F.; Buchanan, J.; Buchanan, N. J.; Buchholz, P.; Buckingham, R. M.; Buckley, A. G.; Buda, S. I.; Budagov, I. A.; Budick, B.; Büscher, V.; Bugge, L.; Bulekov, O.; Bundock, A. C.; Bunse, M.; Buran, T.; Burckhart, H.; Burdin, S.; Burgess, T.; Burke, S.; Busato, E.; Bussey, P.; Buszello, C. P.; Butin, F.; Butler, B.; Butler, J. M.; Buttar, C. M.; Butterworth, J. M.; Buttinger, W.; Cabrera Urbán, S.; Caforio, D.; Cakir, O.; Calafiura, P.; Calderini, G.; Calfayan, P.; Calkins, R.; Caloba, L. P.; Caloi, R.; Calvet, D.; Calvet, S.; Camacho Toro, R.; Camarri, P.; Cambiaghi, M.; Cameron, D.; Caminada, L. M.; Campana, S.; Campanelli, M.; Canale, V.; Canelli, F.; Canepa, A.; Cantero, J.; Capasso, L.; Capeans Garrido, M. D. M.; Caprini, I.; Caprini, M.; Capriotti, D.; Capua, M.; Caputo, R.; Cardarelli, R.; Carli, T.; Carlino, G.; Carminati, L.; Caron, B.; Caron, S.; Carquin, E.; Carrillo Montoya, G. D.; Carter, A. A.; Carter, J. R.; Carvalho, J.; Casadei, D.; Casado, M. P.; Cascella, M.; Caso, C.; Castaneda Hernandez, A. M.; Castaneda-Miranda, E.; Castillo Gimenez, V.; Castro, N. F.; Cataldi, G.; Catastini, P.; Catinaccio, A.; Catmore, J. R.; Cattai, A.; Cattani, G.; Caughron, S.; Cauz, D.; Cavalleri, P.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerqueira, A. S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cetin, S. A.; Cevenini, F.; Chafaq, A.; Chakraborty, D.; Chalupkova, I.; Chan, K.; Chapleau, B.; Chapman, J. D.; Chapman, J. W.; Chareyre, E.; Charlton, D. G.; Chavda, V.; Chavez Barajas, C. A.; Cheatham, S.; Chekanov, S.; Chekulaev, S. V.; Chelkov, G. A.; Chelstowska, M. A.; Chen, C.; Chen, H.; Chen, S.; Chen, T.; Chen, X.; Cheng, S.; Cheplakov, A.; Chepurnov, V. F.; Cherkaoui El Moursli, R.; Chernyatin, V.; Cheu, E.; Cheung, S. L.; Chevalier, L.; Chiefari, G.; Chikovani, L.; Childers, J. T.; Chilingarov, A.; Chiodini, G.; Chisholm, A. S.; Chislett, R. T.; Chizhov, M. V.; Choudalakis, G.; Chouridou, S.; Christidi, I. A.; Christov, A.; Chromek-Burckhart, D.; Chu, M. L.; Chudoba, J.; Ciapetti, G.; Ciftci, A. K.; Ciftci, R.; Cinca, D.; Cindro, V.; Ciocca, C.; Ciocio, A.; Cirilli, M.; Citterio, M.; Ciubancan, M.; Clark, A.; Clark, P. J.; Cleland, W.; Clemens, J. C.; Clement, B.; Clement, C.; Clifft, R. W.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coe, P.; Cogan, J. G.; Coggeshall, J.; Cogneras, E.; Colas, J.; Colijn, A. P.; Collins, N. J.; Collins-Tooth, C.; Collot, J.; Colon, G.; Conde Muiño, P.; Coniavitis, E.; Conidi, M. C.; Consonni, M.; Consonni, S. M.; Consorti, V.; Constantinescu, S.; Conta, C.; Conti, G.; Conventi, F.; Cook, J.; Cooke, M.; Cooper, B. D.; Cooper-Sarkar, A. M.; Copic, K.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M. J.; Costanzo, D.; Costin, T.; Côté, D.; Courneyea, L.; Cowan, G.; Cowden, C.; Cox, B. E.; Cranmer, K.; Crescioli, F.; Cristinziani, M.; Crosetti, G.; Crupi, R.; Crépé-Renaudin, S.; Cuciuc, C.-M.; Cuenca Almenar, C.; Cuhadar Donszelmann, T.; Curatolo, M.; Curtis, C. J.; Cuthbert, C.; Cwetanski, P.; Czirr, H.; Czodrowski, P.; Czyczula, Z.; D'Auria, S.; D'Onofrio, M.; D'Orazio, A.; Da Silva, P. V. M.; Da Via, C.; Dabrowski, W.; Dafinca, A.; Dai, T.; Dallapiccola, C.; Dam, M.; Dameri, M.; Damiani, D. S.; Danielsson, H. O.; Dannheim, D.; Dao, V.; Darbo, G.; Darlea, G. L.; Davey, W.; Davidek, T.; Davidson, N.; Davidson, R.; Davies, E.; Davies, M.; Davison, A. R.; Davygora, Y.; Dawe, E.; Dawson, I.; Dawson, J. W.; Daya-Ishmukhametova, R. K.; De, K.; de Asmundis, R.; De Castro, S.; De Castro Faria Salgado, P. E.; De Cecco, S.; de Graat, J.; De Groot, N.; de Jong, P.; De La Taille, C.; De la Torre, H.; De Lotto, B.; de Mora, L.; De Nooij, L.; De Pedis, D.; De Salvo, A.; De Sanctis, U.; De Santo, A.; De Vivie De Regie, J. B.; De Zorzi, G.; Dean, S.; Dearnaley, W. J.; Debbe, R.; Debenedetti, C.; Dechenaux, B.; Dedovich, D. V.; Degenhardt, J.; Del Papa, C.; Del Peso, J.; Del Prete, T.; Delemontex, T.; Deliyergiyev, M.; Dell'Acqua, A.; Dell'Asta, L.; Della Pietra, M.; della Volpe, D.; Delmastro, M.; Delruelle, N.; Delsart, P. A.; Deluca, C.; Demers, S.; Demichev, M.; Demirkoz, B.; Deng, J.; Denisov, S. P.; Derendarz, D.; Derkaoui, J. E.; Derue, F.; Dervan, P.; Desch, K.; Devetak, E.; Deviveiros, P. O.; Dewhurst, A.; DeWilde, B.; Dhaliwal, S.; Dhullipudi, R.; Di Ciaccio, A.; Di Ciaccio, L.; Di Girolamo, A.; Di Girolamo, B.; Di Luise, S.; Di Mattia, A.; Di Micco, B.; Di Nardo, R.; Di Simone, A.; Di Sipio, R.; Diaz, M. A.; Diblen, F.; Diehl, E. B.; Dietrich, J.; Dietzsch, T. A.; Diglio, S.; Dindar Yagci, K.; Dingfelder, J.; Dionisi, C.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djobava, T.; do Vale, M. A. B.; Do Valle Wemans, A.; Doan, T. K. O.; Dobbs, M.; Dobinson, R.; Dobos, D.; Dobson, E.; Dodd, J.; Doglioni, C.; Doherty, T.; Doi, Y.; Dolejsi, J.; Dolenc, I.; Dolezal, Z.; Dolgoshein, B. A.; Dohmae, T.; Donadelli, M.; Donega, M.; Donini, J.; Dopke, J.; Doria, A.; Dos Anjos, A.; Dosil, M.; Dotti, A.; Dova, M. T.; Doxiadis, A. D.; Doyle, A. T.; Drasal, Z.; Drees, J.; Dressnandt, N.; Drevermann, H.; Driouichi, C.; Dris, M.; Dubbert, J.; Dube, S.; Duchovni, E.; Duckeck, G.; Dudarev, A.; Dudziak, F.; Dührssen, M.; Duerdoth, I. P.; Duflot, L.; Dufour, M.-A.; Dunford, M.; Duran Yildiz, H.; Duxfield, R.; Dwuznik, M.; Dydak, F.; Düren, M.; Ebenstein, W. L.; Ebke, J.; Eckweiler, S.; Edmonds, K.; Edwards, C. A.; Edwards, N. C.; Ehrenfeld, W.; Ehrich, T.; Eifert, T.; Eigen, G.; Einsweiler, K.; Eisenhandler, E.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Ellis, K.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Emeliyanov, D.; Engelmann, R.; Engl, A.; Epp, B.; Eppig, A.; Erdmann, J.; Ereditato, A.; Eriksson, D.; Ernst, J.; Ernst, M.; Ernwein, J.; Errede, D.; Errede, S.; Ertel, E.; Escalier, M.; Escobar, C.; Espinal Curull, X.; Esposito, B.; Etienne, F.; Etienvre, A. I.; Etzion, E.; Evangelakou, D.; Evans, H.; Fabbri, L.; Fabre, C.; Fakhrutdinov, R. M.; Falciano, S.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farley, J.; Farooque, T.; Farrell, S.; Farrington, S. M.; Farthouat, P.; Fassnacht, P.; Fassouliotis, D.; Fatholahzadeh, B.; Favareto, A.; Fayard, L.; Fazio, S.; Febbraro, R.; Federic, P.; Fedin, O. L.; Fedorko, W.; Fehling-Kaschek, M.; Feligioni, L.; Fellmann, D.; Feng, C.; Feng, E. J.; Fenyuk, A. B.; Ferencei, J.; Ferland, J.; Fernando, W.; Ferrag, S.; Ferrando, J.; Ferrara, V.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferreira de Lima, D. E.; Ferrer, A.; Ferrer, M. L.; Ferrere, D.; Ferretti, C.; Ferretto Parodi, A.; Fiascaris, M.; Fiedler, F.; Filipčič, A.; Filippas, A.; Filthaut, F.; Fincke-Keeler, M.; Fiolhais, M. C. N.; Fiorini, L.; Firan, A.; Fischer, G.; Fischer, P.; Fisher, M. J.; Flechl, M.; Fleck, I.; Fleckner, J.; Fleischmann, P.; Fleischmann, S.; Flick, T.; Floderus, A.; Flores Castillo, L. R.; Flowerdew, M. J.; Fokitis, M.; Fonseca Martin, T.; Forbush, D. A.; Formica, A.; Forti, A.; Fortin, D.; Foster, J. M.; Fournier, D.; Foussat, A.; Fowler, A. J.; Fowler, K.; Fox, H.; Francavilla, P.; Franchino, S.; Francis, D.; Frank, T.; Franklin, M.; Franz, S.; Fraternali, M.; Fratina, S.; French, S. T.; Friedrich, C.; Friedrich, F.; Froeschl, R.; Froidevaux, D.; Frost, J. A.; Fukunaga, C.; Fullana Torregrosa, E.; Fulsom, B. G.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gadfort, T.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Gallas, E. J.; Gallo, V.; Gallop, B. J.; Gallus, P.; Gan, K. K.; Gao, Y. S.; Gapienko, V. A.; Gaponenko, A.; Garberson, F.; Garcia-Sciveres, M.; García, C.; García Navarro, J. E.; Gardner, R. W.; Garelli, N.; Garitaonandia, H.; Garonne, V.; Garvey, J.; Gatti, C.; Gaudio, G.; Gaur, B.; Gauthier, L.; Gauzzi, P.; Gavrilenko, I. L.; Gay, C.; Gaycken, G.; Gayde, J.-C.; Gazis, E. N.; Ge, P.; Gecse, Z.; Gee, C. N. P.; Geerts, D. A. A.; Geich-Gimbel, Ch.; Gellerstedt, K.; Gemme, C.; Gemmell, A.; Genest, M. H.; Gentile, S.; George, M.; George, S.; Gerlach, P.; Gershon, A.; Geweniger, C.; Ghazlane, H.; Ghodbane, N.; Giacobbe, B.; Giagu, S.; Giakoumopoulou, V.; Giangiobbe, V.; Gianotti, F.; Gibbard, B.; Gibson, A.; Gibson, S. M.; Gilbert, L. M.; Gilewsky, V.; Gillberg, D.; Gillman, A. R.; Gingrich, D. M.; Ginzburg, J.; Giokaris, N.; Giordani, M. P.; Giordano, R.; Giorgi, F. M.; Giovannini, P.; Giraud, P. F.; Giugni, D.; Giunta, M.; Giusti, P.; Gjelsten, B. K.; Gladilin, L. K.; Glasman, C.; Glatzer, J.; Glazov, A.; Glitza, K. W.; Glonti, G. L.; Goddard, J. R.; Godfrey, J.; Godlewski, J.; Goebel, M.; Göpfert, T.; Goeringer, C.; Gössling, C.; Göttfert, T.; Goldfarb, S.; Golling, T.; Gomes, A.; Gomez Fajardo, L. S.; Gonçalo, R.; Goncalves Pinto Firmino Da Costa, J.; Gonella, L.; Gonidec, A.; Gonzalez, S.; González de la Hoz, S.; Gonzalez Parra, G.; Gonzalez Silva, M. L.; Gonzalez-Sevilla, S.; Goodson, J. J.; Goossens, L.; Gorbounov, P. A.; Gordon, H. A.; Gorelov, I.; Gorfine, G.; Gorini, B.; Gorini, E.; Gorišek, A.; Gornicki, E.; Goryachev, V. N.; Gosdzik, B.; Goshaw, A. T.; Gosselink, M.; Gostkin, M. I.; Gough Eschrich, I.; Gouighri, M.; Goujdami, D.; Goulette, M. P.; Goussiou, A. G.; Goy, C.; Gozpinar, S.; Grabowska-Bold, I.; Grafström, P.; Grahn, K.-J.; Grancagnolo, F.; Grancagnolo, S.; Grassi, V.; Gratchev, V.; Grau, N.; Gray, H. M.; Gray, J. A.; Graziani, E.; Grebenyuk, O. G.; Greenshaw, T.; Greenwood, Z. D.; Gregersen, K.; Gregor, I. M.; Grenier, P.; Griffiths, J.; Grigalashvili, N.; Grillo, A. A.; Grinstein, S.; Grishkevich, Y. V.; Grivaz, J.-F.; Gross, E.; Grosse-Knetter, J.; Groth-Jensen, J.; Grybel, K.; Guarino, V. J.; Guest, D.; Guicheney, C.; Guida, A.; Guindon, S.; Guler, H.; Gunther, J.; Guo, B.; Guo, J.; Gupta, A.; Gusakov, Y.; Gushchin, V. N.; Gutierrez, P.; Guttman, N.; Gutzwiller, O.; Guyot, C.; Gwenlan, C.; Gwilliam, C. B.; Haas, A.; Haas, S.; Haber, C.; Hadavand, H. K.; Hadley, D. R.; Haefner, P.; Hahn, F.; Haider, S.; Hajduk, Z.; Hakobyan, H.; Hall, D.; Haller, J.; Hamacher, K.; Hamal, P.; Hamer, M.; Hamilton, A.; Hamilton, S.; Han, H.; Han, L.; Hanagaki, K.; Hanawa, K.; Hance, M.; Handel, C.; Hanke, P.; Hansen, J. R.; Hansen, J. B.; Hansen, J. D.; Hansen, P. H.; Hansson, P.; Hara, K.; Hare, G. A.; Harenberg, T.; Harkusha, S.; Harper, D.; Harrington, R. D.; Harris, O. M.; Harrison, K.; Hartert, J.; Hartjes, F.; Haruyama, T.; Harvey, A.; Hasegawa, S.; Hasegawa, Y.; Hassani, S.; Hatch, M.; Hauff, D.; Haug, S.; Hauschild, M.; Hauser, R.; Havranek, M.; Hawes, B. M.; Hawkes, C. M.; Hawkings, R. J.; Hawkins, A. D.; Hawkins, D.; Hayakawa, T.; Hayashi, T.; Hayden, D.; Hayward, H. S.; Haywood, S. J.; Hazen, E.; He, M.; Head, S. J.; Hedberg, V.; Heelan, L.; Heim, S.; Heinemann, B.; Heisterkamp, S.; Helary, L.; Heller, C.; Heller, M.; Hellman, S.; Hellmich, D.; Helsens, C.; Henderson, R. C. W.; Henke, M.; Henrichs, A.; Henriques Correia, A. M.; Henrot-Versille, S.; Henry-Couannier, F.; Hensel, C.; Henß, T.; Hernandez, C. M.; Hernández Jiménez, Y.; Herrberg, R.; Herten, G.; Hertenberger, R.; Hervas, L.; Hesketh, G. G.; Hessey, N. P.; Higón-Rodriguez, E.; Hill, D.; Hill, J. C.; Hill, N.; Hiller, K. H.; Hillert, S.; Hillier, S. J.; Hinchliffe, I.; Hines, E.; Hirose, M.; Hirsch, F.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M. C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M. R.; Hoffman, J.; Hoffmann, D.; Hohlfeld, M.; Holder, M.; Holmgren, S. O.; Holy, T.; Holzbauer, J. L.; Homma, Y.; Hong, T. M.; Hooft van Huysduynen, L.; Horazdovsky, T.; Horn, C.; Horner, S.; Hostachy, J.-Y.; Hou, S.; Houlden, M. A.; Hoummada, A.; Howarth, J.; Howell, D. F.; Hristova, I.; Hrivnac, J.; Hruska, I.; Hryn'ova, T.; Hsu, P. J.; Hsu, S.-C.; Huang, G. S.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Huettmann, A.; Huffman, T. B.; Hughes, E. W.; Hughes, G.; Hughes-Jones, R. E.; Huhtinen, M.; Hurst, P.; Hurwitz, M.; Husemann, U.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibbotson, M.; Ibragimov, I.; Ichimiya, R.; Iconomidou-Fayard, L.; Idarraga, J.; Iengo, P.; Igonkina, O.; Ikegami, Y.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Ilic, N.; Imori, M.; Ince, T.; Inigo-Golfin, J.; Ioannou, P.; Iodice, M.; Iordanidou, K.; Ippolito, V.; Irles Quiles, A.; Isaksson, C.; Ishikawa, A.; Ishino, M.; Ishmukhametov, R.; Issever, C.; Istin, S.; Ivashin, A. V.; Iwanski, W.; Iwasaki, H.; Izen, J. M.; Izzo, V.; Jackson, B.; Jackson, J. N.; Jackson, P.; Jaekel, M. R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakubek, J.; Jana, D. K.; Jansen, E.; Jansen, H.; Jantsch, A.; Janus, M.; Jarlskog, G.; Jeanty, L.; Jelen, K.; Jen-La Plante, I.; Jenni, P.; Jeremie, A.; Jež, P.; Jézéquel, S.; Jha, M. K.; Ji, H.; Ji, W.; Jia, J.; Jiang, Y.; Jimenez Belenguer, M.; Jin, G.; Jin, S.; Jinnouchi, O.; Joergensen, M. D.; Joffe, D.; Johansen, L. G.; Johansen, M.; Johansson, K. E.; Johansson, P.; Johnert, S.; Johns, K. A.; Jon-And, K.; Jones, G.; Jones, R. W. L.; Jones, T. W.; Jones, T. J.; Jonsson, O.; Joram, C.; Jorge, P. M.; Joseph, J.; Joshi, K. D.; Jovicevic, J.; Jovin, T.; Ju, X.; Jung, C. A.; Jungst, R. M.; Juranek, V.; Jussel, P.; Juste Rozas, A.; Kabachenko, V. V.; Kabana, S.; Kaci, M.; Kaczmarska, A.; Kadlecik, P.; Kado, M.; Kagan, H.; Kagan, M.; Kaiser, S.; Kajomovitz, E.; Kalinin, S.; Kalinovskaya, L. V.; Kama, S.; Kanaya, N.; Kaneda, M.; Kaneti, S.; Kanno, T.; Kantserov, V. A.; Kanzaki, J.; Kaplan, B.; Kapliy, A.; Kaplon, J.; Kar, D.; Karagounis, M.; Karagoz, M.; Karnevskiy, M.; Kartvelishvili, V.; Karyukhin, A. N.; Kashif, L.; Kasieczka, G.; Kass, R. D.; Kastanas, A.; Kataoka, M.; Kataoka, Y.; Katsoufis, E.; Katzy, J.; Kaushik, V.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kayl, M. S.; Kazanin, V. A.; Kazarinov, M. Y.; Keeler, R.; Kehoe, R.; Keil, M.; Kekelidze, G. D.; Keller, J. S.; Kennedy, J.; Kenyon, M.; Kepka, O.; Kerschen, N.; Kerševan, B. P.; Kersten, S.; Kessoku, K.; Keung, J.; Khalil-zada, F.; Khandanyan, H.; Khanov, A.; Kharchenko, D.; Khodinov, A.; Kholodenko, A. G.; Khomich, A.; Khoo, T. J.; Khoriauli, G.; Khoroshilov, A.; Khovanskiy, N.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kim, H.; Kim, M. S.; Kim, S. H.; Kimura, N.; Kind, O.; King, B. T.; King, M.; King, R. S. B.; Kirk, J.; Kirsch, L. E.; Kiryunin, A. E.; Kishimoto, T.; Kisielewska, D.; Kittelmann, T.; Kiver, A. M.; Kladiva, E.; Klein, M.; Klein, U.; Kleinknecht, K.; Klemetti, M.; Klier, A.; Klimek, P.; Klimentov, A.; Klingenberg, R.; Klinger, J. A.; Klinkby, E. B.; Klioutchnikova, T.; Klok, P. F.; Klous, S.; Kluge, E.-E.; Kluge, T.; Kluit, P.; Kluth, S.; Knecht, N. S.; Kneringer, E.; Knobloch, J.; Knoops, E. B. F. G.; Knue, A.; Ko, B. R.; Kobayashi, T.; Kobel, M.; Kocian, M.; Kodys, P.; Köneke, K.; König, A. C.; Koenig, S.; Köpke, L.; Koetsveld, F.; Koevesarki, P.; Koffas, T.; Koffeman, E.; Kogan, L. A.; Kohlmann, S.; Kohn, F.; Kohout, Z.; Kohriki, T.; Koi, T.; Kokott, T.; Kolachev, G. M.; Kolanoski, H.; Kolesnikov, V.; Koletsou, I.; Koll, J.; Kollefrath, M.; Kolya, S. D.; Komar, A. A.; Komori, Y.; Kondo, T.; Kono, T.; Kononov, A. I.; Konoplich, R.; Konstantinidis, N.; Kootz, A.; Koperny, S.; Korcyl, K.; Kordas, K.; Koreshev, V.; Korn, A.; Korol, A.; Korolkov, I.; Korolkova, E. V.; Korotkov, V. A.; Kortner, O.; Kortner, S.; Kostyukhin, V. V.; Kotamäki, M. J.; Kotov, S.; Kotov, V. M.; Kotwal, A.; Kourkoumelis, C.; Kouskoura, V.; Koutsman, A.; Kowalewski, R.; Kowalski, T. Z.; Kozanecki, W.; Kozhin, A. S.; Kral, V.; Kramarenko, V. A.; Kramberger, G.; Krasny, M. W.; Krasznahorkay, A.; Kraus, J.; Kraus, J. K.; Krejci, F.; Kretzschmar, J.; Krieger, N.; Krieger, P.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Krüger, H.; Kruker, T.; Krumnack, N.; Krumshteyn, Z. V.; Kruth, A.; Kubota, T.; Kuday, S.; Kuehn, S.; Kugel, A.; Kuhl, T.; Kuhn, D.; Kukhtin, V.; Kulchitsky, Y.; Kuleshov, S.; Kummer, C.; Kuna, M.; Kundu, N.; Kunkle, J.; Kupco, A.; Kurashige, H.; Kurata, M.; Kurochkin, Y. A.; Kus, V.; Kuwertz, E. S.; Kuze, M.; Kvita, J.; Kwee, R.; La Rosa, A.; La Rotonda, L.; Labarga, L.; Labbe, J.; Lablak, S.; Lacasta, C.; Lacava, F.; Lacker, H.; Lacour, D.; Lacuesta, V. R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Laisne, E.; Lamanna, M.; Lambourne, L.; Lampen, C. L.; Lampl, W.; Lancon, E.; Landgraf, U.; Landon, M. P. J.; Lane, J. L.; Lange, C.; Lankford, A. J.; Lanni, F.; Lantzsch, K.; Laplace, S.; Lapoire, C.; Laporte, J. F.; Lari, T.; Larionov, A. V.; Larner, A.; Lasseur, C.; Lassnig, M.; Laurelli, P.; Lavorini, V.; Lavrijsen, W.; Laycock, P.; Lazarev, A. B.; Le Dortz, O.; Le Guirriec, E.; Le Maner, C.; Le Menedeu, E.; Lebel, C.; LeCompte, T.; Ledroit-Guillon, F.; Lee, H.; Lee, J. S. H.; Lee, S. C.; Lee, L.; Lefebvre, M.; Legendre, M.; Leger, A.; LeGeyt, B. C.; Legger, F.; Leggett, C.; Lehmacher, M.; Lehmann Miotto, G.; Lei, X.; Leite, M. A. L.; Leitner, R.; Lellouch, D.; Leltchouk, M.; Lemmer, B.; Lendermann, V.; Leney, K. J. C.; Lenz, T.; Lenzen, G.; Lenzi, B.; Leonhardt, K.; Leontsinis, S.; Lepold, F.; Leroy, C.; Lessard, J.-R.; Lesser, J.; Lester, C. G.; Lester, C. M.; Levêque, J.; Levin, D.; Levinson, L. J.; Levitski, M. S.; Lewis, A.; Lewis, G. H.; Leyko, A. M.; Leyton, M.; Li, B.; Li, H.; Li, S.; Li, X.; Liang, Z.; Liao, H.; Liberti, B.; Lichard, P.; Lichtnecker, M.; Lie, K.; Liebig, W.; Limbach, C.; Limosani, A.; Limper, M.; Lin, S. C.; Linde, F.; Linnemann, J. T.; Lipeles, E.; Lipinsky, L.; Lipniacka, A.; Liss, T. M.; Lissauer, D.; Lister, A.; Litke, A. M.; Liu, C.; Liu, D.; Liu, H.; Liu, J. B.; Liu, M.; Liu, Y.; Livan, M.; Livermore, S. S. A.; Lleres, A.; Llorente Merino, J.; Lloyd, S. L.; Lobodzinska, E.; Loch, P.; Lockman, W. S.; Loddenkoetter, T.; Loebinger, F. K.; Loginov, A.; Loh, C. W.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Loken, J.; Lombardo, V. P.; Long, R. E.; Lopes, L.; Lopez Mateos, D.; Lorenz, J.; Lorenzo Martinez, N.; Losada, M.; Loscutoff, P.; Lo Sterzo, F.; Losty, M. J.; Lou, X.; Lounis, A.; Loureiro, K. F.; Love, J.; Love, P. A.; Lowe, A. J.; Lu, F.; Lubatti, H. J.; Luci, C.; Lucotte, A.; Ludwig, A.; Ludwig, D.; Ludwig, I.; Ludwig, J.; Luehring, F.; Luijckx, G.; Lukas, W.; Lumb, D.; Luminari, L.; Lund, E.; Lund-Jensen, B.; Lundberg, B.; Lundberg, J.; Lundquist, J.; Lungwitz, M.; Lutz, G.; Lynn, D.; Lys, J.; Lytken, E.; Ma, H.; Ma, L. L.; Macana Goia, J. A.; Maccarrone, G.; Macchiolo, A.; Maček, B.; Machado Miguens, J.; Mackeprang, R.; Madaras, R. J.; Mader, W. F.; Maenner, R.; Maeno, T.; Mättig, P.; Mättig, S.; Magnoni, L.; Magradze, E.; Mahalalel, Y.; Mahboubi, K.; Mahmoud, S.; Mahout, G.; Maiani, C.; Maidantchik, C.; Maio, A.; Majewski, S.; Makida, Y.; Makovec, N.; Mal, P.; Malaescu, B.; Malecki, Pa.; Malecki, P.; Maleev, V. P.; Malek, F.; Mallik, U.; Malon, D.; Malone, C.; Maltezos, S.; Malyshev, V.; Malyukov, S.; Mameghani, R.; Mamuzic, J.; Manabe, A.; Mandelli, L.; Mandić, I.; Mandrysch, R.; Maneira, J.; Mangeard, P. S.; Manhaes de Andrade Filho, L.; Manjavidze, I. D.; Mann, A.; Manning, P. M.; Manousakis-Katsikakis, A.; Mansoulie, B.; Manz, A.; Mapelli, A.; Mapelli, L.; March, L.; Marchand, J. F.; Marchese, F.; Marchiori, G.; Marcisovsky, M.; Marino, C. P.; Marroquim, F.; Marshall, R.; Marshall, Z.; Martens, F. K.; Marti-Garcia, S.; Martin, A. J.; Martin, B.; Martin, B.; Martin, F. F.; Martin, J. P.; Martin, Ph.; Martin, T. A.; Martin, V. J.; Martin dit Latour, B.; Martin-Haugh, S.; Martinez, M.; Martinez Outschoorn, V.; Martyniuk, A. C.; Marx, M.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A. L.; Massa, I.; Massaro, G.; Massol, N.; Mastrandrea, P.; Mastroberardino, A.; Masubuchi, T.; Matricon, P.; Matsumoto, H.; Matsunaga, H.; Matsushita, T.; Mattravers, C.; Maugain, J. M.; Maurer, J.; Maxfield, S. J.; May, E. N.; Mayne, A.; Mazini, R.; Mazur, M.; Mazzaferro, L.; Mazzanti, M.; Mc Kee, S. P.; McCarn, A.; McCarthy, R. L.; McCarthy, T. G.; McCubbin, N. A.; McFarlane, K. W.; Mcfayden, J. A.; McGlone, H.; Mchedlidze, G.; McLaren, R. A.; Mclaughlan, T.; McMahon, S. J.; McPherson, R. A.; Meade, A.; Mechnich, J.; Mechtel, M.; Medinnis, M.; Meera-Lebbai, R.; Meguro, T.; Mehdiyev, R.; Mehlhase, S.; Mehta, A.; Meier, K.; Meirose, B.; Melachrinos, C.; Mellado Garcia, B. R.; Meloni, F.; Mendoza Navas, L.; Meng, Z.; Mengarelli, A.; Menke, S.; Menot, C.; Meoni, E.; Mercurio, K. M.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F. S.; Merritt, H.; Messina, A.; Metcalfe, J.; Mete, A. S.; Meyer, C.; Meyer, C.; Meyer, J.-P.; Meyer, J.; Meyer, J.; Meyer, T. C.; Meyer, W. T.; Miao, J.; Michal, S.; Micu, L.; Middleton, R. P.; Migas, S.; Mijović, L.; Mikenberg, G.; Mikestikova, M.; Mikuž, M.; Miller, D. W.; Miller, R. J.; Mills, W. J.; Mills, C.; Milov, A.; Milstead, D. A.; Milstein, D.; Minaenko, A. A.; Miñano Moya, M.; Minashvili, I. A.; Mincer, A. I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L. M.; Mirabelli, G.; Miralles Verge, L.; Misiejuk, A.; Mitrevski, J.; Mitrofanov, G. Y.; Mitsou, V. A.; Mitsui, S.; Miyagawa, P. S.; Miyazaki, K.; Mjörnmark, J. U.; Moa, T.; Mockett, P.; Moed, S.; Moeller, V.; Mönig, K.; Möser, N.; Mohapatra, S.; Mohr, W.; Mohrdieck-Möck, S.; Moles-Valls, R.; Molina-Perez, J.; Monk, J.; Monnier, E.; Montesano, S.; Monticelli, F.; Monzani, S.; Moore, R. W.; Moorhead, G. F.; Mora Herrera, C.; Moraes, A.; Morange, N.; Morel, J.; Morello, G.; Moreno, D.; Moreno Llácer, M.; Morettini, P.; Morgenstern, M.; Morii, M.; Morin, J.; Morley, A. K.; Mornacchi, G.; Morozov, S. V.; Morris, J. D.; Morvaj, L.; Moser, H. G.; Mosidze, M.; Moss, J.; Mount, R.; Mountricha, E.; Mouraviev, S. V.; Moyse, E. J. W.; Mudrinic, M.; Mueller, F.; Mueller, J.; Mueller, K.; Müller, T. A.; Mueller, T.; Muenstermann, D.; Munwes, Y.; Murray, W. J.; Mussche, I.; Musto, E.; Myagkov, A. G.; Myska, M.; Nadal, J.; Nagai, K.; Nagano, K.; Nagarkar, A.; Nagasaka, Y.; Nagel, M.; Nairz, A. M.; Nakahama, Y.; Nakamura, K.; Nakamura, T.; Nakano, I.; Nanava, G.; Napier, A.; Narayan, R.; Nash, M.; Nation, N. R.; Nattermann, T.; Naumann, T.; Navarro, G.; Neal, H. A.; Nebot, E.; Nechaeva, P. Yu.; Neep, T. J.; Negri, A.; Negri, G.; Nektarijevic, S.; Nelson, A.; Nelson, T. K.; Nemecek, S.; Nemethy, P.; Nepomuceno, A. A.; Nessi, M.; Neubauer, M. S.; Neusiedl, A.; Neves, R. M.; Nevski, P.; Newman, P. R.; Nguyen Thi Hong, V.; Nickerson, R. B.; Nicolaidou, R.; Nicolas, L.; Nicquevert, B.; Niedercorn, F.; Nielsen, J.; Niinikoski, T.; Nikiforou, N.; Nikiforov, A.; Nikolaenko, V.; Nikolaev, K.; Nikolic-Audit, I.; Nikolics, K.; Nikolopoulos, K.; Nilsen, H.; Nilsson, P.; Ninomiya, Y.; Nisati, A.; Nishiyama, T.; Nisius, R.; Nodulman, L.; Nomachi, M.; Nomidis, I.; Nordberg, M.; Norton, P. R.; Novakova, J.; Nozaki, M.; Nozka, L.; Nugent, I. M.; Nuncio-Quiroz, A.-E.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; O'Brien, B. J.; O'Neale, S. W.; O'Neil, D. C.; O'Shea, V.; Oakes, L. B.; Oakham, F. G.; Oberlack, H.; Ocariz, J.; Ochi, A.; Oda, S.; Odaka, S.; Odier, J.; Ogren, H.; Oh, A.; Oh, S. H.; Ohm, C. C.; Ohshima, T.; Ohshita, H.; Okada, S.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olariu, A.; Olcese, M.; Olchevski, A. G.; Olivares Pino, S. A.; Oliveira, M.; Oliveira Damazio, D.; Oliver Garcia, E.; Olivito, D.; Olszewski, A.; Olszowska, J.; Omachi, C.; Onofre, A.; Onyisi, P. U. E.; Oram, C. J.; Oreglia, M. J.; Oren, Y.; Orestano, D.; Orlando, N.; Orlov, I.; Oropeza Barrera, C.; Orr, R. S.; Osculati, B.; Ospanov, R.; Osuna, C.; Otero y Garzon, G.; Ottersbach, J. P.; Ouchrif, M.; Ouellette, E. A.; Ould-Saada, F.; Ouraou, A.; Ouyang, Q.; Ovcharova, A.; Owen, M.; Owen, S.; Ozcan, V. E.; Ozturk, N.; Pacheco Pages, A.; Padilla Aranda, C.; Pagan Griso, S.; Paganis, E.; Paige, F.; Pais, P.; Pajchel, K.; Palacino, G.; Paleari, C. P.; Palestini, S.; Pallin, D.; Palma, A.; Palmer, J. D.; Pan, Y. B.; Panagiotopoulou, E.; Panes, B.; Panikashvili, N.; Panitkin, S.; Pantea, D.; Panuskova, M.; Paolone, V.; Papadelis, A.; Papadopoulou, Th. D.; Paramonov, A.; Paredes Hernandez, D.; Park, W.; Parker, M. A.; Parodi, F.; Parsons, J. A.; Parzefall, U.; Pashapour, S.; Pasqualucci, E.; Passaggio, S.; Passeri, A.; Pastore, F.; Pastore, Fr.; Pásztor, G.; Pataraia, S.; Patel, N.; Pater, J. R.; Patricelli, S.; Pauly, T.; Pecsy, M.; Pedraza Morales, M. I.; Peleganchuk, S. V.; Pelikan, D.; Peng, H.; Penning, B.; Penson, A.; Penwell, J.; Perantoni, M.; Perez, K.; Perez Cavalcanti, T.; Perez Codina, E.; Pérez García-Estañ, M. T.; Perez Reale, V.; Perini, L.; Pernegger, H.; Perrino, R.; Perrodo, P.; Persembe, S.; Peshekhonov, V. D.; Peters, K.; Petersen, B. A.; Petersen, J.; Petersen, T. C.; Petit, E.; Petridis, A.; Petridou, C.; Petrolo, E.; Petrucci, F.; Petschull, D.; Petteni, M.; Pezoa, R.; Phan, A.; Phillips, P. W.; Piacquadio, G.; Picazio, A.; Piccaro, E.; Piccinini, M.; Piec, S. M.; Piegaia, R.; Pignotti, D. T.; Pilcher, J. E.; Pilkington, A. D.; Pina, J.; Pinamonti, M.; Pinder, A.; Pinfold, J. L.; Ping, J.; Pinto, B.; Pirotte, O.; Pizio, C.; Placakyte, R.; Plamondon, M.; Pleier, M.-A.; Pleskach, A. V.; Plotnikova, E.; Poblaguev, A.; Poddar, S.; Podlyski, F.; Poggioli, L.; Poghosyan, T.; Pohl, M.; Polci, F.; Polesello, G.; Policicchio, A.; Polini, A.; Poll, J.; Polychronakos, V.; Pomarede, D. M.; Pomeroy, D.; Pommès, K.; Pontecorvo, L.; Pope, B. G.; Popeneciu, G. A.; Popovic, D. S.; Poppleton, A.; Portell Bueso, X.; Posch, C.; Pospelov, G. E.; Pospisil, S.; Potrap, I. N.; Potter, C. J.; Potter, C. T.; Poulard, G.; Poveda, J.; Pozdnyakov, V.; Prabhu, R.; Pralavorio, P.; Pranko, A.; Prasad, S.; Pravahan, R.; Prell, S.; Pretzl, K.; Pribyl, L.; Price, D.; Price, J.; Price, L. E.; Price, M. J.; Prieur, D.; Primavera, M.; Prokofiev, K.; Prokoshin, F.; Protopopescu, S.; Proudfoot, J.; Prudent, X.; Przybycien, M.; Przysiezniak, H.; Psoroulas, S.; Ptacek, E.; Pueschel, E.; Purdham, J.; Purohit, M.; Puzo, P.; Pylypchenko, Y.; Qian, J.; Qian, Z.; Qin, Z.; Quadt, A.; Quarrie, D. R.; Quayle, W. B.; Quinonez, F.; Raas, M.; Radescu, V.; Radics, B.; Radloff, P.; Rador, T.; Ragusa, F.; Rahal, G.; Rahimi, A. M.; Rahm, D.; Rajagopalan, S.; Rammensee, M.; Rammes, M.; Randle-Conde, A. S.; Randrianarivony, K.; Ratoff, P. N.; Rauscher, F.; Rave, T. C.; Raymond, M.; Read, A. L.; Rebuzzi, D. M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Reichold, A.; Reinherz-Aronis, E.; Reinsch, A.; Reisinger, I.; Rembser, C.; Ren, Z. L.; Renaud, A.; Rescigno, M.; Resconi, S.; Resende, B.; Reznicek, P.; Rezvani, R.; Richards, A.; Richter, R.; Richter-Was, E.; Ridel, M.; Rijpstra, M.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Rios, R. R.; Riu, I.; Rivoltella, G.; Rizatdinova, F.; Rizvi, E.; Robertson, S. H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, J. E. M.; Robson, A.; Rocha de Lima, J. G.; Roda, C.; Roda Dos Santos, D.; Rodriguez, D.; Roe, A.; Roe, S.; Røhne, O.; Rojo, V.; Rolli, S.; Romaniouk, A.; Romano, M.; Romanov, V. M.; Romeo, G.; Romero Adam, E.; Roos, L.; Ros, E.; Rosati, S.; Rosbach, K.; Rose, A.; Rose, M.; Rosenbaum, G. A.; Rosenberg, E. I.; Rosendahl, P. L.; Rosenthal, O.; Rosselet, L.; Rossetti, V.; Rossi, E.; Rossi, L. P.; Rotaru, M.; Roth, I.; Rothberg, J.; Rousseau, D.; Royon, C. R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Rubbo, F.; Rubinskiy, I.; Ruckert, B.; Ruckstuhl, N.; Rud, V. I.; Rudolph, C.; Rudolph, G.; Rühr, F.; Ruggieri, F.; Ruiz-Martinez, A.; Rumiantsev, V.; Rumyantsev, L.; Runge, K.; Rurikova, Z.; Rusakovich, N. A.; Rutherfoord, J. P.; Ruwiedel, C.; Ruzicka, P.; Ryabov, Y. F.; Ryadovikov, V.; Ryan, P.; Rybar, M.; Rybkin, G.; Ryder, N. C.; Rzaeva, S.; Saavedra, A. F.; Sadeh, I.; Sadrozinski, H. F.-W.; Sadykov, R.; Safai Tehrani, F.; Sakamoto, H.; Salamanna, G.; Salamon, A.; Saleem, M.; Salek, D.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvachua Ferrando, B. M.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sampsonidis, D.; Samset, B. H.; Sanchez, A.; Sanchez Martinez, V.; Sandaker, H.; Sander, H. G.; Sanders, M. P.; Sandhoff, M.; Sandoval, T.; Sandoval, C.; Sandstroem, R.; Sandvoss, S.; Sankey, D. P. C.; Sansoni, A.; Santamarina Rios, C.; Santoni, C.; Santonico, R.; Santos, H.; Saraiva, J. G.; Sarangi, T.; Sarkisyan-Grinbaum, E.; Sarri, F.; Sartisohn, G.; Sasaki, O.; Sasao, N.; Satsounkevitch, I.; Sauvage, G.; Sauvan, E.; Sauvan, J. B.; Savard, P.; Savinov, V.; Savu, D. O.; Sawyer, L.; Saxon, D. H.; Saxon, J.; Says, L. P.; Sbarra, C.; Sbrizzi, A.; Scallon, O.; Scannicchio, D. A.; Scarcella, M.; Schaarschmidt, J.; Schacht, P.; Schaefer, D.; Schäfer, U.; Schaepe, S.; Schaetzel, S.; Schaffer, A. C.; Schaile, D.; Schamberger, R. D.; Schamov, A. G.; Scharf, V.; Schegelsky, V. A.; Scheirich, D.; Schernau, M.; Scherzer, M. I.; Schiavi, C.; Schieck, J.; Schioppa, M.; Schlenker, S.; Schlereth, J. L.; Schmidt, E.; Schmieden, K.; Schmitt, C.; Schmitt, S.; Schmitz, M.; Schöning, A.; Schott, M.; Schouten, D.; Schovancova, J.; Schram, M.; Schroeder, C.; Schroer, N.; Schuler, G.; Schultens, M. J.; Schultes, J.; Schultz-Coulon, H.-C.; Schulz, H.; Schumacher, J. W.; Schumacher, M.; Schumm, B. A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwemling, Ph.; Schwienhorst, R.; Schwierz, R.; Schwindling, J.; Schwindt, T.; Schwoerer, M.; Sciolla, G.; Scott, W. G.; Searcy, J.; Sedov, G.; Sedykh, E.; Segura, E.; Seidel, S. C.; Seiden, A.; Seifert, F.; Seixas, J. M.; Sekhniaidze, G.; Sekula, S. J.; Selbach, K. E.; Seliverstov, D. M.; Sellden, B.; Sellers, G.; Seman, M.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Serkin, L.; Seuster, R.; Severini, H.; Sevior, M. E.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L. Y.; Shank, J. T.; Shao, Q. T.; Shapiro, M.; Shatalov, P. B.; Shaver, L.; Shaw, K.; Sherman, D.; Sherwood, P.; Shibata, A.; Shichi, H.; Shimizu, S.; Shimojima, M.; Shin, T.; Shiyakova, M.; Shmeleva, A.; Shochet, M. J.; Short, D.; Shrestha, S.; Shulga, E.; Shupe, M. A.; Sicho, P.; Sidoti, A.; Siegert, F.; Sijacki, Dj.; Silbert, O.; Silva, J.; Silver, Y.; Silverstein, D.; Silverstein, S. B.; Simak, V.; Simard, O.; Simic, Lj.; Simion, S.; Simmons, B.; Simoniello, R.; Simonyan, M.; Sinervo, P.; Sinev, N. B.; Sipica, V.; Siragusa, G.; Sircar, A.; Sisakyan, A. N.; Sivoklokov, S. Yu.; Sjölin, J.; Sjursen, T. B.; Skinnari, L. A.; Skottowe, H. P.; Skovpen, K.; Skubic, P.; Skvorodnev, N.; Slater, M.; Slavicek, T.; Sliwa, K.; Sloper, J.; Smakhtin, V.; Smart, B. H.; Smirnov, S. Yu.; Smirnov, Y.; Smirnova, L. N.; Smirnova, O.; Smith, B. C.; Smith, D.; Smith, K. M.; Smizanska, M.; Smolek, K.; Snesarev, A. A.; Snow, S. W.; Snow, J.; Snyder, S.; Soares, M.; Sobie, R.; Sodomka, J.; Soffer, A.; Solans, C. A.; Solar, M.; Solc, J.; Soldatov, E.; Soldevila, U.; Solfaroli Camillocci, E.; Solodkov, A. A.; Solovyanov, O. V.; Soni, N.; Sopko, V.; Sopko, B.; Sosebee, M.; Soualah, R.; Soukharev, A.; Spagnolo, S.; Spanò, F.; Spighi, R.; Spigo, G.; Spila, F.; Spiwoks, R.; Spousta, M.; Spreitzer, T.; Spurlock, B.; St. Denis, R. D.; Stahlman, J.; Stamen, R.; Stanecka, E.; Stanek, R. W.; Stanescu, C.; Stanescu-Bellu, M.; Stapnes, S.; Starchenko, E. A.; Stark, J.; Staroba, P.; Starovoitov, P.; Staude, A.; Stavina, P.; Steele, G.; Steinbach, P.; Steinberg, P.; Stekl, I.; Stelzer, B.; Stelzer, H. J.; Stelzer-Chilton, O.; Stenzel, H.; Stern, S.; Stevenson, K.; Stewart, G. A.; Stillings, J. A.; Stockton, M. C.; Stoerig, K.; Stoicea, G.; Stonjek, S.; Strachota, P.; Stradling, A. R.; Straessner, A.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strang, M.; Strauss, E.; Strauss, M.; Strizenec, P.; Ströhmer, R.; Strom, D. M.; Strong, J. A.; Stroynowski, R.; Strube, J.; Stugu, B.; Stumer, I.; Stupak, J.; Sturm, P.; Styles, N. A.; Soh, D. A.; Su, D.; Subramania, HS.; Succurro, A.; Sugaya, Y.; Sugimoto, T.; Suhr, C.; Suita, K.; Suk, M.; Sulin, V. V.; Sultansoy, S.; Sumida, T.; Sun, X.; Sundermann, J. E.; Suruliz, K.; Sushkov, S.; Susinno, G.; Sutton, M. R.; Suzuki, Y.; Suzuki, Y.; Svatos, M.; Sviridov, Yu. M.; Swedish, S.; Sykora, I.; Sykora, T.; Szeless, B.; Sánchez, J.; Ta, D.; Tackmann, K.; Taffard, A.; Tafirout, R.; Taiblum, N.; Takahashi, Y.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Takubo, Y.; Talby, M.; Talyshev, A.; Tamsett, M. C.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tanaka, S.; Tanaka, Y.; Tanasijczuk, A. J.; Tani, K.; Tannoury, N.; Tappern, G. P.; Tapprogge, S.; Tardif, D.; Tarem, S.; Tarrade, F.; Tartarelli, G. F.; Tas, P.; Tasevsky, M.; Tassi, E.; Tatarkhanov, M.; Tayalati, Y.; Taylor, C.; Taylor, F. E.; Taylor, G. N.; Taylor, W.; Teinturier, M.; Teixeira Dias Castanheira, M.; Teixeira-Dias, P.; Temming, K. K.; Ten Kate, H.; Teng, P. K.; Terada, S.; Terashi, K.; Terron, J.; Testa, M.; Teuscher, R. J.; Thadome, J.; Therhaag, J.; Theveneaux-Pelzer, T.; Thioye, M.; Thoma, S.; Thomas, J. P.; Thompson, E. N.; Thompson, P. D.; Thompson, P. D.; Thompson, A. S.; Thomsen, L. A.; Thomson, E.; Thomson, M.; Thun, R. P.; Tian, F.; Tibbetts, M. J.; Tic, T.; Tikhomirov, V. O.; Tikhonov, Y. A.; Timoshenko, S.; Tipton, P.; Tique Aires Viegas, F. J.; Tisserant, S.; Toczek, B.; Todorov, T.; Todorova-Nova, S.; Toggerson, B.; Tojo, J.; Tokár, S.; Tokunaga, K.; Tokushuku, K.; Tollefson, K.; Tomoto, M.; Tompkins, L.; Toms, K.; Tong, G.; Tonoyan, A.; Topfel, C.; Topilin, N. D.; Torchiani, I.; Torrence, E.; Torres, H.; Torró Pastor, E.; Toth, J.; Touchard, F.; Tovey, D. R.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I. M.; Trincaz-Duvoid, S.; Tripiana, M. F.; Trischuk, W.; Trivedi, A.; Trocmé, B.; Troncon, C.; Trottier-McDonald, M.; Trzebinski, M.; Trzupek, A.; Tsarouchas, C.; Tseng, J. C.-L.; Tsiakiris, M.; Tsiareshka, P. V.; Tsionou, D.; Tsipolitis, G.; Tsiskaridze, V.; Tskhadadze, E. G.; Tsukerman, I. I.; Tsulaia, V.; Tsung, J.-W.; Tsuno, S.; Tsybychev, D.; Tua, A.; Tudorache, A.; Tudorache, V.; Tuggle, J. M.; Turala, M.; Turecek, D.; Turk Cakir, I.; Turlay, E.; Turra, R.; Tuts, P. M.; Tykhonov, A.; Tylmad, M.; Tyndel, M.; Tzanakos, G.; Uchida, K.; Ueda, I.; Ueno, R.; Ugland, M.; Uhlenbrock, M.; Uhrmacher, M.; Ukegawa, F.; Unal, G.; Underwood, D. G.; Undrus, A.; Unel, G.; Unno, Y.; Urbaniec, D.; Usai, G.; Uslenghi, M.; Vacavant, L.; Vacek, V.; Vachon, B.; Vahsen, S.; Valenta, J.; Valente, P.; Valentinetti, S.; Valkar, S.; Valladolid Gallego, E.; Vallecorsa, S.; Valls Ferrer, J. A.; van der Graaf, H.; van der Kraaij, E.; Van Der Leeuw, R.; van der Poel, E.; van der Ster, D.; van Eldik, N.; van Gemmeren, P.; van Kesteren, Z.; van Vulpen, I.; Vanadia, M.; Vandelli, W.; Vandoni, G.; Vaniachine, A.; Vankov, P.; Vannucci, F.; Varela Rodriguez, F.; Vari, R.; Varol, T.; Varouchas, D.; Vartapetian, A.; Varvell, K. E.; Vassilakopoulos, V. I.; Vazeille, F.; Vazquez Schroeder, T.; Vegni, G.; Veillet, J. J.; Vellidis, C.; Veloso, F.; Veness, R.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J. C.; Vest, A.; Vetterli, M. C.; Vichou, I.; Vickey, T.; Vickey Boeriu, O. E.; Viehhauser, G. H. A.; Viel, S.; Villa, M.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M. G.; Vinek, E.; Vinogradov, V. B.; Virchaux, M.; Virzi, J.; Vitells, O.; Viti, M.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vladoiu, D.; Vlasak, M.; Vlasov, N.; Vogel, A.; Vokac, P.; Volpi, G.; Volpi, M.; Volpini, G.; von der Schmitt, H.; von Loeben, J.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorobiev, A. P.; Vorwerk, V.; Vos, M.; Voss, R.; Voss, T. T.; Vossebeld, J. H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vu Anh, T.; Vuillermet, R.; Vukotic, I.; Wagner, W.; Wagner, P.; Wahlen, H.; Wakabayashi, J.; Walch, S.; Walder, J.; Walker, R.; Walkowiak, W.; Wall, R.; Waller, P.; Wang, C.; Wang, H.; Wang, H.; Wang, J.; Wang, J.; Wang, J. C.; Wang, R.; Wang, S. M.; Wang, T.; Warburton, A.; Ward, C. P.; Warsinsky, M.; Washbrook, A.; Wasicki, C.; Watkins, P. M.; Watson, A. T.; Watson, I. J.; Watson, M. F.; Watts, G.; Watts, S.; Waugh, A. T.; Waugh, B. M.; Weber, M.; Weber, M. S.; Weber, P.; Weidberg, A. R.; Weigell, P.; Weingarten, J.; Weiser, C.; Wellenstein, H.; Wells, P. S.; Wenaus, T.; Wendland, D.; Wendler, S.; Weng, Z.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Werth, M.; Wessels, M.; Wetter, J.; Weydert, C.; Whalen, K.; Wheeler-Ellis, S. J.; Whitaker, S. P.; White, A.; White, M. J.; White, S.; Whitehead, S. R.; Whiteson, D.; Whittington, D.; Wicek, F.; Wicke, D.; Wickens, F. J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik-Fuchs, L. A. M.; Wijeratne, P. A.; Wildauer, A.; Wildt, M. A.; Wilhelm, I.; Wilkens, H. G.; Will, J. Z.; Williams, E.; Williams, H. H.; Willis, W.; Willocq, S.; Wilson, J. A.; Wilson, M. G.; Wilson, A.; Wingerter-Seez, I.; Winkelmann, S.; Winklmeier, F.; Wittgen, M.; Wolter, M. W.; Wolters, H.; Wong, W. C.; Wooden, G.; Wosiek, B. K.; Wotschack, J.; Woudstra, M. J.; Wozniak, K. W.; Wraight, K.; Wright, C.; Wright, M.; Wrona, B.; Wu, S. L.; Wu, X.; Wu, Y.; Wulf, E.; Wunstorf, R.; Wynne, B. M.; Xella, S.; Xiao, M.; Xie, S.; Xie, Y.; Xu, C.; Xu, D.; Xu, G.; Yabsley, B.; Yacoob, S.; Yamada, M.; Yamaguchi, H.; Yamamoto, A.; Yamamoto, K.; Yamamoto, S.; Yamamura, T.; Yamanaka, T.; Yamaoka, J.; Yamazaki, T.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, U. K.; Yang, Y.; Yang, Y.; Yang, Z.; Yanush, S.; Yao, Y.; Yasu, Y.; Ybeles Smit, G. V.; Ye, J.; Ye, S.; Yilmaz, M.; Yoosoofmiya, R.; Yorita, K.; Yoshida, R.; Young, C.; Young, C. J.; Youssef, S.; Yu, D.; Yu, J.; Yu, J.; Yuan, L.; Yurkewicz, A.; Zabinski, B.; Zaets, V. G.; Zaidan, R.; Zaitsev, A. M.; Zajacova, Z.; Zanello, L.; Zaytsev, A.; Zeitnitz, C.; Zeller, M.; Zeman, M.; Zemla, A.; Zendler, C.; Zenin, O.; Ženiš, T.; Zinonos, Z.; Zenz, S.; Zerwas, D.; Zevi della Porta, G.; Zhan, Z.; Zhang, D.; Zhang, H.; Zhang, J.; Zhang, X.; Zhang, Z.; Zhao, L.; Zhao, T.; Zhao, Z.; Zhemchugov, A.; Zheng, S.; Zhong, J.; Zhou, B.; Zhou, N.; Zhou, Y.; Zhu, C. G.; Zhu, H.; Zhu, J.; Zhu, Y.; Zhuang, X.; Zhuravlov, V.; Zieminska, D.; Zimmermann, R.; Zimmermann, S.; Zimmermann, S.; Ziolkowski, M.; Zitoun, R.; Živković, L.; Zmouchko, V. V.; Zobernig, G.; Zoccoli, A.; Zsenei, A.; zur Nedden, M.; Zutshi, V.; Zwalinski, L.

    2012-06-01

    A measurement of the jet activity in tbar{t} events produced in proton-proton collisions at a centre-of-mass energy of 7 TeV is presented, using 2.05 fb-1 of integrated luminosity collected by the ATLAS detector at the Large Hadron Collider. The tbar{t} events are selected in the dilepton decay channel with two identified b-jets from the top quark decays. Events are vetoed if they contain an additional jet with transverse momentum above a threshold in a central rapidity interval. The fraction of events surviving the jet veto is presented as a function of this threshold for four different central rapidity interval definitions. An alternate measurement is also performed, in which events are vetoed if the scalar transverse momentum sum of the additional jets in each rapidity interval is above a threshold. In both measurements, the data are corrected for detector effects and compared to the theoretical models implemented in MC@NLO, Powheg, Alpgen and Sherpa. The experimental uncertainties are often smaller than the spread of theoretical predictions, allowing deviations between data and theory to be observed in some regions of phase space.

  16. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. R.; St. Clair, T. L.; Burks, H. D.; Stoakley, D. M.

    1987-01-01

    A method has been found for enhancing the melt flow of thermoplastic polyimides during processing. A high molecular weight 422 copoly(amic acid) or copolyimide was fused with approximately 0.05 to 5 pct by weight of a low molecular weight amic acid or imide additive, and this melt was studied by capillary rheometry. Excellent flow and improved composite properties on graphite resulted from the addition of a PMDA-aniline additive to LARC-TPI. Solution viscosity studies imply that amic acid additives temporarily lower molecular weight and, hence, enlarge the processing window. Thus, compositions containing the additive have a lower melt viscosity for a longer time than those unmodified.

  17. Additive usage levels.

    PubMed

    Langlais, R

    1996-01-01

    With the adoption of the European Parliament and Council Directives on sweeteners, colours and miscellaneous additives the Commission is now embarking on the project of coordinating the activities of the European Union Member States in the collection of the data that are to make up the report on food additive intake requested by the European Parliament. This presentation looks at the inventory of available sources on additive use levels and concludes that for the time being national legislation is still the best source of information considering that the directives have yet to be transposed into national legislation. Furthermore, this presentation covers the correlation of the food categories as found in the additives directives with those used by national consumption surveys and finds that in a number of instances this correlation still leaves a lot to be desired. The intake of additives via food ingestion and the intake of substances which are chemically identical to additives but which occur naturally in fruits and vegetables is found in a number of cases to be higher than the intake of additives added during the manufacture of foodstuffs. While the difficulties are recognized in contributing to the compilation of food additive intake data, industry as a whole, i.e. the food manufacturing and food additive manufacturing industries, are confident that in a concerted effort, use data on food additives by industry can be made available. Lastly, the paper points out that with the transportation of the additives directives into national legislation and the time by which the food industry will be able to make use of the new food legislative environment several years will still go by; food additives use data by the food industry will thus have to be reviewed at the beginning of the next century. PMID:8792135

  18. An additional middle cuneiform?

    PubMed Central

    Brookes-Fazakerley, S.D.; Jackson, G.E.; Platt, S.R.

    2015-01-01

    Additional cuneiform bones of the foot have been described in reference to the medial bipartite cuneiform or as small accessory ossicles. An additional middle cuneiform has not been previously documented. We present the case of a patient with an additional ossicle that has the appearance and location of an additional middle cuneiform. Recognizing such an anatomical anomaly is essential for ruling out second metatarsal base or middle cuneiform fractures and for the preoperative planning of arthrodesis or open reduction and internal fixation procedures in this anatomical location. PMID:26224890

  19. Out of bounds additive manufacturing

    SciTech Connect

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; Peter, William H.; Dehoff, Ryan R.

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  20. Measuring $\

    SciTech Connect

    Mitchell, Jessica Sarah

    2011-01-01

    The MINOS Experiment consists of two steel-scintillator calorimeters, sampling the long baseline NuMI muon neutrino beam. It was designed to make a precise measurement of the ‘atmospheric’ neutrino mixing parameters, Δm2 atm. and sin2 (2 atm.). The Near Detector measures the initial spectrum of the neutrino beam 1km from the production target, and the Far Detector, at a distance of 735 km, measures the impact of oscillations in the neutrino energy spectrum. Work performed to validate the quality of the data collected by the Near Detector is presented as part of this thesis. This thesis primarily details the results of a vμ disappearance analysis, and presents a new sophisticated fitting software framework, which employs a maximum likelihood method to extract the best fit oscillation parameters. The software is entirely decoupled from the extrapolation procedure between the detectors, and is capable of fitting multiple event samples (defined by the selections applied) in parallel, and any combination of energy dependent and independent sources of systematic error. Two techniques to improve the sensitivity of the oscillation measurement were also developed. The inclusion of information on the energy resolution of the neutrino events results in a significant improvement in the allowed region for the oscillation parameters. The degree to which sin2 (2θ )= 1.0 could be disfavoured with the exposure of the current dataset if the true mixing angle was non-maximal, was also investigated, with an improved neutrino energy reconstruction for very low energy events. The best fit oscillation parameters, obtained by the fitting software and incorporating resolution information were: | Δm2| = 2.32+0.12 -0.08×10-3 eV2 and sin2 (2θ ) > 0.90(90% C.L.). The analysis provides the current world best measurement of the atmospheric neutrino mass

  1. Carbamate deposit control additives

    SciTech Connect

    Honnen, L.R.; Lewis, R.A.

    1980-11-25

    Deposit control additives for internal combustion engines are provided which maintain cleanliness of intake systems without contributing to combustion chamber deposits. The additives are poly(oxyalkylene) carbamates comprising a hydrocarbyloxyterminated poly(Oxyalkylene) chain of 2-5 carbon oxyalkylene units bonded through an oxycarbonyl group to a nitrogen atom of ethylenediamine.

  2. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Fletcher, James C. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1992-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  3. Polyimide processing additives

    NASA Technical Reports Server (NTRS)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Stoakley, Diane M. (Inventor); Burks, Harold D. (Inventor)

    1993-01-01

    A process for preparing polyimides having enhanced melt flow properties is described. The process consists of heating a mixture of a high molecular weight poly-(amic acid) or polyimide with a low molecular weight amic acid or imide additive in the range of 0.05 to 15 percent by weight of the additive. The polyimide powders so obtained show improved processability, as evidenced by lower melt viscosity by capillary rheometry. Likewise, films prepared from mixtures of polymers with additives show improved processability with earlier onset of stretching by TMA.

  4. Smog control fuel additives

    SciTech Connect

    Lundby, W.

    1993-06-29

    A method is described of controlling, reducing or eliminating, ozone and related smog resulting from photochemical reactions between ozone and automotive or industrial gases comprising the addition of iodine or compounds of iodine to hydrocarbon-base fuels prior to or during combustion in an amount of about 1 part iodine per 240 to 10,000,000 parts fuel, by weight, to be accomplished by: (a) the addition of these inhibitors during or after the refining or manufacturing process of liquid fuels; (b) the production of these inhibitors for addition into fuel tanks, such as automotive or industrial tanks; or (c) the addition of these inhibitors into combustion chambers of equipment utilizing solid fuels for the purpose of reducing ozone.

  5. Food Additives and Hyperkinesis

    ERIC Educational Resources Information Center

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  6. Additional Types of Neuropathy

    MedlinePlus

    ... A A Listen En Español Additional Types of Neuropathy Charcot's Joint Charcot's Joint, also called neuropathic arthropathy, ... can stop bone destruction and aid healing. Cranial Neuropathy Cranial neuropathy affects the 12 pairs of nerves ...

  7. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  8. Additives in plastics.

    PubMed Central

    Deanin, R D

    1975-01-01

    The polymers used in plastics are generally harmless. However, they are rarely used in pure form. In almost all commercial plastics, they are "compounded" with monomeric ingredients to improve their processing and end-use performance. In order of total volume used, these monomeric additives may be classified as follows: reinforcing fibers, fillers, and coupling agents; plasticizers; colorants; stabilizers (halogen stabilizers, antioxidants, ultraviolet absorbers, and biological preservatives); processing aids (lubricants, others, and flow controls); flame retardants, peroxides; and antistats. Some information is already available, and much more is needed, on potential toxicity and safe handling of these additives during processing and manufacture of plastics products. PMID:1175566

  9. Biobased lubricant additives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fully biobased lubricants are those formulated using all biobased ingredients, i.e. biobased base oils and biobased additives. Such formulations provide the maximum environmental, safety, and economic benefits expected from a biobased product. Currently, there are a number of biobased base oils that...

  10. Multifunctional fuel additives

    SciTech Connect

    Baillargeon, D.J.; Cardis, A.B.; Heck, D.B.

    1991-03-26

    This paper discusses a composition comprising a major amount of a liquid hydrocarbyl fuel and a minor low-temperature flow properties improving amount of an additive product of the reaction of a suitable diol and product of a benzophenone tetracarboxylic dianhydride and a long-chain hydrocarbyl aminoalcohol.

  11. Boron addition to alloys

    SciTech Connect

    Coad, B. C.

    1985-08-20

    A process for addition of boron to an alloy which involves forming a melt of the alloy and a reactive metal, selected from the group consisting of aluminum, titanium, zirconium and mixtures thereof to the melt, maintaining the resulting reactive mixture in the molten state and reacting the boric oxide with the reactive metal to convert at least a portion of the boric oxide to boron which dissolves in the resulting melt, and to convert at least portion of the reactive metal to the reactive metal oxide, which oxide remains with the resulting melt, and pouring the resulting melt into a gas stream to form a first atomized powder which is subsequently remelted with further addition of boric oxide, re-atomized, and thus reprocessed to convert essentially all the reactive metal to metal oxide to produce a powdered alloy containing specified amounts of boron.

  12. Tackifier for addition polyimides

    NASA Technical Reports Server (NTRS)

    Butler, J. M.; St.clair, T. L.

    1980-01-01

    A modification to the addition polyimide, LaRC-160, was prepared to improve tack and drape and increase prepeg out-time. The essentially solventless, high viscosity laminating resin is synthesized from low cost liquid monomers. The modified version takes advantage of a reactive, liquid plasticizer which is used in place of solvent and helps solve a major problem of maintaining good prepeg tack and drape, or the ability of the prepeg to adhere to adjacent plies and conform to a desired shape during the lay up process. This alternate solventless approach allows both longer life of the polymer prepeg and the processing of low void laminates. This approach appears to be applicable to all addition polyimide systems.

  13. Vinyl capped addition polyimides

    NASA Technical Reports Server (NTRS)

    Vannucci, Raymond D. (Inventor); Malarik, Diane C. (Inventor); Delvigs, Peter (Inventor)

    1991-01-01

    Polyimide resins (PMR) are generally useful where high strength and temperature capabilities are required (at temperatures up to about 700 F). Polyimide resins are particularly useful in applications such as jet engine compressor components, for example, blades, vanes, air seals, air splitters, and engine casing parts. Aromatic vinyl capped addition polyimides are obtained by reacting a diamine, an ester of tetracarboxylic acid, and an aromatic vinyl compound. Low void materials with improved oxidative stability when exposed to 700 F air may be fabricated as fiber reinforced high molecular weight capped polyimide composites. The aromatic vinyl capped polyimides are provided with a more aromatic nature and are more thermally stable than highly aliphatic, norbornenyl-type end-capped polyimides employed in PMR resins. The substitution of aromatic vinyl end-caps for norbornenyl end-caps in addition polyimides results in polymers with improved oxidative stability.

  14. [Biologically active food additives].

    PubMed

    Velichko, M A; Shevchenko, V P

    1998-07-01

    More than half out of 40 projects for the medical science development by the year of 2000 have been connected with the bio-active edible additives that are called "the food of XXI century", non-pharmacological means for many diseases. Most of these additives--nutricevtics and parapharmacevtics--are intended for the enrichment of food rations for the sick or healthy people. The ecologicaly safest and most effective are combined domestic adaptogens with immuno-modulating and antioxidating action that give anabolic and stimulating effect,--"leveton", "phytoton" and "adapton". The MKTs-229 tablets are residue discharge means. For atherosclerosis and general adiposis they recommend "tsar tablets" and "aiconol (ikhtien)"--on the base of cod-liver oil or "splat" made out of seaweed (algae). All these preparations have been clinically tested and received hygiene certificates from the Institute of Dietology of the Russian Academy of Medical Science. PMID:9752776

  15. Electrophilic addition of astatine

    SciTech Connect

    Norseev, Yu.V.; Vasaros, L.; Nhan, D.D.; Huan, N.K.

    1988-03-01

    It has been shown for the first time that astatine is capable of undergoing addition reactions to unsaturated hydrocarbons. A new compound of astatine, viz., ethylene astatohydrin, has been obtained, and its retention numbers of squalane, Apiezon, and tricresyl phosphate have been found. The influence of various factors on the formation of ethylene astatohydrin has been studied. It has been concluded on the basis of the results obtained that the univalent cations of astatine in an acidic medium is protonated hypoastatous acid.

  16. Hydrocarbon fuel additive

    SciTech Connect

    Ambrogio, S.

    1989-02-28

    This patent describes the method of fuel storage or combustion, wherein the fuel supply contains small amounts of water, the step of adding to the fuel supply an additive comprising a blend of a hydrophilic agent chosen from the group of ethylene glycol, n-butyl alcohol, and cellosolve in the range of 22-37% by weight; ethoxylated nonylphenol in the range of 26-35% by weight; nonylphenol polyethylene glycol ether in the range of 32-43% by weight.

  17. Functional Generalized Additive Models.

    PubMed

    McLean, Mathew W; Hooker, Giles; Staicu, Ana-Maria; Scheipl, Fabian; Ruppert, David

    2014-01-01

    We introduce the functional generalized additive model (FGAM), a novel regression model for association studies between a scalar response and a functional predictor. We model the link-transformed mean response as the integral with respect to t of F{X(t), t} where F(·,·) is an unknown regression function and X(t) is a functional covariate. Rather than having an additive model in a finite number of principal components as in Müller and Yao (2008), our model incorporates the functional predictor directly and thus our model can be viewed as the natural functional extension of generalized additive models. We estimate F(·,·) using tensor-product B-splines with roughness penalties. A pointwise quantile transformation of the functional predictor is also considered to ensure each tensor-product B-spline has observed data on its support. The methods are evaluated using simulated data and their predictive performance is compared with other competing scalar-on-function regression alternatives. We illustrate the usefulness of our approach through an application to brain tractography, where X(t) is a signal from diffusion tensor imaging at position, t, along a tract in the brain. In one example, the response is disease-status (case or control) and in a second example, it is the score on a cognitive test. R code for performing the simulations and fitting the FGAM can be found in supplemental materials available online. PMID:24729671

  18. Optics of progressive addition lenses.

    PubMed

    Sheedy, J E; Buri, M; Bailey, I L; Azus, J; Borish, I M

    1987-02-01

    The optical characteristics of the major progressive addition lenses were measured using an automated lensometer with a specially designed lens holder to simulate eye rotation. Measurements were made every 3 degrees (about 1.5 mm) and graphs of isospherical equivalent lines and isocylinder lines were developed. Generally the near zone of these lenses is narrower and lower than in bifocal or trifocal lenses. Distinct differences exist between the various progressive lenses. The width of the near zone, rate of power progression, amount of unwanted cylinder (level with the distance center), and clarity of the distance zone are compared for the various lenses. The optical measurements demonstrate an apparent trade-off between the size of the cylinder-free area of the lens and the amount of the cylinder. PMID:3826294

  19. 27 CFR 19.967 - Additional security.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Additional security. 19..., Equipment and Security § 19.967 Additional security. If the appropriate TTB officer finds that security is... diversion of spirits to unauthorized purposes, additional security measures may be required. Such...

  20. Pi Division and Addition

    ERIC Educational Resources Information Center

    Scott, Paul

    2008-01-01

    The number Pi (approximately 3.14159) is defined to be the ratio C/d of the circumference (C) to the diameter (d) of any given circle. In particular, Pi measures the circumference of a circle of diameter d = 1. Historically, the Greek mathematician Archimedes found good approximations for Pi by inscribing and circumscribing many-sided polygons…

  1. Siloxane containing addition polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Addition polyimide oligomers have been synthesized from bis(gamma-aminopropyl) tetramethyldisiloxane and 3, 3', 4, 4'-benzophenonetetracarboxylic dianhydride using a variety of latent crosslinking groups as endcappers. The prepolymers were isolated and characterized for solubility (in amide, chlorinated and ether solvents), melt flow and cure properties. The most promising systems, maleimide and acetylene terminated prepolymers, were selected for detailed study. Graphite cloth reinforced composites were prepared and properties compared with those of graphite/Kerimid 601, a commercially available bismaleimide. Mixtures of the maleimide terminated system with Kerimid 601, in varying proportions, were also studied.

  2. Oil additive process

    SciTech Connect

    Bishop, H.

    1988-10-18

    This patent describes a method of making an additive comprising: (a) adding 2 parts by volume of 3% sodium hypochlorite to 45 parts by volume of diesel oil fuel to form a sulphur free fuel, (b) removing all water and foreign matter formed by the sodium hypochlorite, (c) blending 30 parts by volume of 24% lead naphthanate with 15 parts by volume of the sulphur free fuel, 15 parts by volume of light-weight material oil to form a blended mixture, and (d) heating the blended mixture slowly and uniformly to 152F.

  3. Inconsistency in precipitation measurements across the Alaska-Yukon border

    NASA Astrophysics Data System (ADS)

    Scaff, L.; Yang, D.; Li, Y.; Mekis, E.

    2015-12-01

    This study quantifies the inconsistency in gauge precipitation observations across the border of Alaska and Yukon. It analyses the precipitation measurements by the national standard gauges (National Weather Service (NWS) 8 in. gauge and Nipher gauge) and the bias-corrected data to account for wind effect on the gauge catch, wetting loss and trace events. The bias corrections show a significant amount of errors in the gauge records due to the windy and cold environment in the northern areas of Alaska and Yukon. Monthly corrections increase solid precipitation by 136 % in January and 20 % for July at the Barter Island in Alaska, and about 31 % for January and 4 % for July at the Yukon stations. Regression analyses of the monthly precipitation data show a stronger correlation for the warm months (mainly rainfall) than for cold month (mainly snowfall) between the station pairs, and small changes in the precipitation relationship due to the bias corrections. Double mass curves also indicate changes in the cumulative precipitation over the study periods. This change leads to a smaller and inverted precipitation gradient across the border, representing a significant modification in the precipitation pattern over the northern region. Overall, this study discovers significant inconsistency in the precipitation measurements across the USA-Canada border. This discontinuity is greater for snowfall than for rainfall, as gauge snowfall observations have large errors in windy and cold conditions. This result will certainly impact regional, particularly cross-border, climate and hydrology investigations.

  4. Performance Boosting Additive

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mainstream Engineering Corporation was awarded Phase I and Phase II contracts from Goddard Space Flight Center's Small Business Innovation Research (SBIR) program in early 1990. With support from the SBIR program, Mainstream Engineering Corporation has developed a unique low cost additive, QwikBoost (TM), that increases the performance of air conditioners, heat pumps, refrigerators, and freezers. Because of the energy and environmental benefits of QwikBoost, Mainstream received the Tibbetts Award at a White House Ceremony on October 16, 1997. QwikBoost was introduced at the 1998 International Air Conditioning, Heating, and Refrigeration Exposition. QwikBoost is packaged in a handy 3-ounce can (pressurized with R-134a) and will be available for automotive air conditioning systems in summer 1998.

  5. Sewage sludge additive

    NASA Technical Reports Server (NTRS)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  6. Perspectives on Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Bourell, David L.

    2016-07-01

    Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fabricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.

  7. New addition curing polyimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Cavano, Paul

    1991-01-01

    In an attempt to improve the thermal-oxidative stability (TOS) of PMR-type polymers, the use of 1,4-phenylenebis (phenylmaleic anhydride) PPMA, was evaluated. Two series of nadic end-capped addition curing polyimides were prepared by imidizing PPMA with either 4,4'-methylene dianiline or p-phenylenediamine. The first resulted in improved solubility and increased resin flow while the latter yielded a compression molded neat resin sample with a T(sub g) of 408 C, close to 70 C higher than PME-15. The performance of these materials in long term weight loss studies was below that of PMR-15, independent of post-cure conditions. These results can be rationalized in terms of the thermal lability of the pendant phenyl groups and the incomplete imidization of the sterically congested PPMA. The preparation of model compounds as well as future research directions are discussed.

  8. Does Preoperative Measurement of Cerebral Blood Flow with Acetazolamide Challenge in Addition to Preoperative Measurement of Cerebral Blood Flow at the Resting State Increase the Predictive Accuracy of Development of Cerebral Hyperperfusion after Carotid Endarterectomy? Results from 500 Cases with Brain Perfusion Single-photon Emission Computed Tomography Study

    PubMed Central

    OSHIDA, Sotaro; OGASAWARA, Kuniaki; SAURA, Hiroaki; YOSHIDA, Koji; FUJIWARA, Shunro; KOJIMA, Daigo; KOBAYASHI, Masakazu; YOSHIDA, Kenji; KUBO, Yoshitaka; OGAWA, Akira

    2015-01-01

    The purpose of the present study was to determine whether preoperative measurement of cerebral blood flow (CBF) with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of development of cerebral hyperperfusion after carotid endarterectomy (CEA). CBF at the resting state and cerebrovascular reactivity (CVR) to acetazolamide were quantitatively assessed using N-isopropyl-p-[123I]-iodoamphetamine (IMP)-autoradiography method with single-photon emission computed tomography (SPECT) before CEA in 500 patients with ipsilateral internal carotid artery stenosis (≥ 70%). CBF measurement using 123I-IMP SPECT was also performed immediately and 3 days after CEA. A region of interest (ROI) was automatically placed in the middle cerebral artery territory in the affected cerebral hemisphere using a three-dimensional stereotactic ROI template. Preoperative decreases in CBF at the resting state [95% confidence intervals (CIs), 0.855 to 0.967; P = 0.0023] and preoperative decreases in CVR to acetazolamide (95% CIs, 0.844 to 0.912; P < 0.0001) were significant independent predictors of post-CEA hyperperfusion. The area under the receiver operating characteristic curve for prediction of the development of post-CEA hyperperfusion was significantly greater for CVR to acetazolamide than for CBF at the resting state (difference between areas, 0.173; P < 0.0001). Sensitivity, specificity, and positive- and negative-predictive values for the prediction of the development of post-CEA hyperperfusion were significantly greater for CVR to acetazolamide than for CBF at the resting state (P < 0.05, respectively). The present study demonstrated that preoperative measurement of CBF with acetazolamide in addition to preoperative measurement of CBF at the resting state increases the predictive accuracy of the development of post-CEA hyperperfusion. PMID:25746308

  9. An Additive Manufacturing Test Artifact

    PubMed Central

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  10. An Additive Manufacturing Test Artifact.

    PubMed

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  11. Fire-Retardant Polymeric Additives

    NASA Technical Reports Server (NTRS)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    Polyhydroxyamide (PHA) and polymethoxyamide (PMeOA) are fire-retardant (FR) thermoplastic polymers and have been found to be useful as an additive for imparting fire retardant properties to other compatible, thermoplastic polymers (including some elastomers). Examples of compatible flammable polymers include nylons, polyesters, and acrylics. Unlike most prior additives, PHA and PMeOA do not appreciably degrade the mechanical properties of the matrix polymer; indeed, in some cases, mechanical properties are enhanced. Also, unlike some prior additives, PHA and PMeOA do not decompose into large amounts of corrosive or toxic compounds during combustion and can be processed at elevated temperatures. PMeOA derivative formulations were synthesized and used as an FR additive in the fabrication of polyamide (PA) and polystyrene (PS) composites with notable reduction (>30 percent for PS) in peak heat release rates compared to the neat polymer as measured by a Cone Calorimeter (ASTM E1354). Synergistic effects were noted with nanosilica composites. These nanosilica composites had more than 50-percent reduction in peak heat release rates. In a typical application, a flammable thermoplastic, thermoplastic blend, or elastomer that one seeks to render flame-retardant is first dry-mixed with PHA or PMeOA or derivative thereof. The proportion of PHA or PMeOA or derivative in the mixture is typically chosen to lie between 1 and 20 weight percent. The dry blend can then be melt-extruded. The extruded polymer blend can further be extruded and/or molded into fibers, pipes, or any other of a variety of objects that may be required to be fire-retardant. The physical and chemical mechanisms which impart flame retardancy of the additive include inhibiting free-radical oxidation in the vapor phase, preventing vaporization of fuel (the polymer), and cooling through the formation of chemical bonds in either the vapor or the condensed phase. Under thermal stress, the cyclic hydroxyl/ methoxy

  12. Long-term variability of aerosol optical thickness in Eastern Europe over 2001-2014 according to the measurements at the Moscow MSU MO AERONET site with additional cloud and NO2 correction

    NASA Astrophysics Data System (ADS)

    Chubarova, N. Y.; Poliukhov, A. A.; Gorlova, I. D.

    2015-07-01

    The aerosol properties of the atmosphere were obtained within the framework of the AERONET program at the Moscow State University Meteorological Observatory (Moscow MSU MO) over 2001-2014 period. The quality data control has revealed the necessity of their additional cloud and NO2 correction. The application of cloud correction according to hourly visual cloud observations provides a decrease in average aerosol optical thickness (AOT) at 500 nm of up to 0.03 compared with the standard dataset. We also show that the additional NO2 correction of the AERONET data is needed in large megalopolis, like Moscow, with 12 million residents and the NOx emission rates of about 100 kt yr-1. According to the developed method we estimated monthly mean NO2 content, which provides an additional decrease of 0.01 for AOT at 340 nm, and of about 0.015 - for AOT at 380 and 440 nm. The ratios of NO2 optical thickness to AOT at 380 and 440 nm are about 5-6 % in summer and reach 15-20 % in winter when both factors have similar effects on UV irradiance. Seasonal cycle of AOT at 500 nm is characterized by a noticeable summer and spring maxima, and minimum in winter conditions, changing from 0.08 in December and January up to 0.3 in August. The application of the additional cloud correction removes a local AOT maximum in February, and lowered the December artificial high AOT values. The pronounced negative AOT trends of about -1-5 % yr-1 have been obtained for most months, which could be attributed to the negative trends in emissions (E) of different aerosol precursors of about 116 Gg yr-2 in ESOx, 78 Gg yr-2 in ENMVOC, and 272 Gg yr-2 in ECO over European territory of Russia. No influence of natural factors on temporal AOT variations has been revealed.

  13. The use of the Rx spin label in orientation measurement on proteins, by EPR† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5cp04753f Click here for additional data file.

    PubMed Central

    Stevens, M. A.; McKay, J. E.; Robinson, J. L. S.; EL Mkami, H.; Smith, G. M.

    2016-01-01

    The bipedal spin label Rx is more restricted in its conformation and dynamics than its monopodal counterpart R1. To systematically investigate the utility of the Rx label, we have attempted to comprehensively survey the attachment of Rx to protein secondary structures. We have examined the formation, structure and dynamics of the spin label in relation to the underlying protein in order to determine feasibility and optimum conditions for distance and orientation measurement by pulsed EPR. The labeled proteins have been studied using molecular dynamics, CW EPR, pulsed EPR distance measurement at X-band and orientation measurement at W-band. The utility of different modes and positions of attachment have been compared and contrasted. PMID:26426572

  14. Long-term variability of aerosol optical thickness in Eastern Europe over 2001-2014 according to the measurements at the Moscow MSU MO AERONET site with additional cloud and NO2 correction

    NASA Astrophysics Data System (ADS)

    Chubarova, N. Y.; Poliukhov, A. A.; Gorlova, I. D.

    2016-02-01

    The atmospheric aerosol properties were obtained within the framework of the AERONET program at the Moscow State University Meteorological Observatory (Moscow MSU MO) over the 2001-2014 period. The quality data control has revealed the necessity of additional cloud screening and NO2 correction. The application of additional cloud screening according to hourly visual cloud observations provides a decrease in monthly average aerosol optical thickness (AOT) at 500 nm of up to 0.03 compared with the standard data set. We also show that the additional NO2 correction of the AERONET version 2 data is needed in large megalopolis, like Moscow, with 12 million residents and NOx emission rates of about 100 kt yr-1. According to the developed method, we estimated monthly mean NO2 content, which provides an additional decrease of 0.01 for AOT at 340 nm, and of about 0.015 - for AOT at 380 and 440 nm. The ratios of NO2 optical thickness to AOT at 380 and 440 nm are about 5-6 % in summer and reach 15-20 % in winter when both factors have similar effects on UV irradiance. Seasonal cycle of AOT at 500 nm is characterized by a noticeable summer and spring maxima, and a minimum in winter conditions, changing from 0.08 in December and January up to 0.3 in August. The application of the additional cloud screening removes a local AOT maximum in February. Statistically significant negative trends in annual AOT for UV and mid-visible spectral range have been obtained both for average and 50 % quantile values. The pronounced negative changes were observed in most months with the rate of about -1-5 % yr-1 and could be attributed to the negative trends in emissions (E) of different aerosol precursors of about 135 Gg yr-2 in ESOx, 54 Gg yr-2 in ENMVOC, and slight negative changes in NOx over the European part of Russia. No significant influence of natural factors on temporal AOT variations has been revealed.

  15. A Quasi-Experimental Study of Two Selected Units of the Industrial Arts Curriculum Project Materials to Determine the Measurable Additive Effects of a Unit on Design in Manfacturing Technology upon a Similar Unit on Design in Construction Technology.

    ERIC Educational Resources Information Center

    Kuwik, Paul David

    The purpose of the study was to determine whether exposing junior high school students to a unit on design in construction technology and to a unit on design in manufacturing technology significantly affects their achievement on a test measuring "Technological Principles of Design" when compared to a group of junior high school students exposed…

  16. Challenging Transitions and Crossing Borders: Preparing Novice Mathematics Teacher Educators to Support Novice K-12 Mathematics Teachers

    ERIC Educational Resources Information Center

    Yow, Jan A.; Eli, Jennifer A.; Beisiegel, Mary; McCloskey, Andrea; Welder, Rachael M.

    2016-01-01

    Sixty-nine recently graduated doctoral students in mathematics education completed a survey to determine their perceptions of transitioning from a doctoral program into an academic position at an institution of higher education. Research literature for novice mathematics school teachers was also reviewed to document their experiences transitioning…

  17. 77 FR 10958 - International Services Surveys: BE-150, Quarterly Survey of Cross-Border Credit, Debit, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ... October 28, 2011 issue of the Federal Register (76 FR 66872- 66874), BEA published a notice of proposed... Bureau of Economic Analysis 15 CFR Part 801 RIN 0691-AA79 International Services Surveys: BE-150... Analysis, Commerce. ACTION: Final rule. SUMMARY: This final rule amends the regulations of the Bureau...

  18. Cross-Border Transitions: Navigating Conflict and Political Change through Community Education Practices in Myanmar and the Thai Border

    ERIC Educational Resources Information Center

    Maber, Elizabeth J. T.

    2016-01-01

    Political oscillations in Myanmar and Thailand, between militarisation and democratic reform, have prompted a rapid renegotiation of the alignments, goals and priorities of non-state education providers, both international and community-based, along the two countries' border. This paper explores the responses to shifts in political environment…

  19. National-level differences in the adoption of environmental health technologies: a cross-border comparison from Benin and Togo.

    PubMed

    Wendland, Kelly J; Pattanayak, Subhrendu K; Sills, Erin O

    2015-03-01

    Environmental health problems such as malaria, respiratory infections, diarrhoea and malnutrition pose very high burdens on the poor rural people in much of the tropics. Recent research on key interventions-the adoption and use of relatively cheap and effective environmental health technologies-has focused primarily on the influence of demand-side household-level drivers. Relatively few studies of the promotion and use of these technologies have considered the role of contextual factors such as governance, the enabling environment and national policies because of the challenges of cross-country comparisons. We exploit a natural experimental setting by comparing household adoption across the Benin-Togo national border that splits the Tamberma Valley in West Africa. Households across the border share the same culture, ethnicity, weather, physiographic features, livelihoods and infrastructure; however, they are located in countries at virtually opposite ends of the institutional spectrum of democratic elections, voice and accountability, effective governance and corruption. Binary choice models and rigorous non-parametric matching estimators confirm that households in Benin are more likely than households in Togo to plant soybeans, build improved cookstoves and purchase mosquito nets, ceteris paribus. Although we cannot identify the exact mechanism for the large and significant national-level differences in technology adoption, our findings suggest that contextual institutional factors can be more important than household characteristics for technology adoption. PMID:24436179

  20. Voices from the front lines. Four leaders on the cross-border challeng they've faced.

    PubMed

    Minguet, Luc; Caride, Eduardo; Yamaguchi, Takeo; Tedjarati, Shane

    2014-09-01

    Executives on the front lines of managing across borders share their insights: Luc Minguet, of France's Michelin, talks about the importance of cultural training not just for managers taking on assignments abroad but also for local employees who work with colleagues from around the world. He describes how his own experience learning to communicate across cultures reflects the tire-maker's broader practices. Eduardo Caride, of Madrid-based Telefónica, explains how the relatively young multinational is investing in a diverse talent mix as it strives to become a truly global company. Whereas early on, leaders relied on exporting Spanish managers abroad, he notes, the street now runs both ways. Takeo Yamaguchi, of Japan's Hitachi, details his efforts to create standardized global HR systems and processes across the conglomerate's 948 separate companies. "Three years ago, we had no systematic way of tracking employees, evaluating performance, or identifying future leaders," Yamaguchi says. "Today we do." And Shane Tedjarati, from the United States' Honeywell, talks about how the industrial powerhouse is shifting its strategy toward new regions, such as China, India, vietnam, and Indonesia. "We call these markets 'high-growth regions' instead of emerging markets," says Tedjarati, "because they now account for more than half of Honeywell's total growth." PMID:25318239

  1. Liberalizing Cross-Border Trade in Higher Education: The Coming Revolution of Online Universities. Policy Analysis No. 720

    ERIC Educational Resources Information Center

    Lester, Simon

    2013-01-01

    Recent developments in higher education--with leading institutions starting to offer courses online--suggest that the Internet is going to disrupt this industry, just as it has already disrupted the music and book industries, as well as many others. We are entering a period of experimentation with new business models for higher education, with…

  2. Trade in Services and Its Policy Implications: The Case of Cross-Border/Transnational Higher Education in Malaysia

    ERIC Educational Resources Information Center

    Morshidi, Sirat; Razak, Ahmad Abdul; Koo, Yew Lie

    2011-01-01

    The geography of trade in services is becoming increasingly important for a developing country such as Malaysia. But, present discussion on trade in education services, in particular, higher education and the General Agreement on Trade in Services (GATS) in Malaysia is rather limited and takes a short-term perspective. This is especially so with…

  3. Influences of Cross-Border Mobility on Tuberculosis Diagnoses and Treatment Interruption Among Injection Drug Users in Tijuana, Mexico

    PubMed Central

    Deiss, Robert; Garfein, Richard S.; Lozada, Remedios; Burgos, Jose Luis; Brouwer, Kimberly C.; Moser, Kathleen S.; Zuniga, Maria Luisa; Rodwell, Timothy C.; Ojeda, Victoria D.

    2009-01-01

    Objectives. We sought to identify correlates of reported lifetime diagnoses of TB among injection drug users in the border city of Tijuana, Mexico. Methods. Injection drug users in Tijuana were recruited into a prospective cohort study during 2006 and 2007. We used weighted multivariate logistic regression to identify correlates of TB diagnoses. Results. Of the 1056 participants, 103 (9.8%) reported a history of TB, among whom 93% received anti-TB medication and 80% were diagnosed in the United States. Treatment was prematurely halted among 8% of patients; deportation from the United States was the cause of half of these treatment interruptions. History of travel to (odds ratio [OR] = 6.44; 95% confidence interval [CI] = 1.53, 27.20) or deportation from (OR = 1.83; 95% CI = 1.07, 3.12) the United States and incarceration (OR = 2.20; 95% CI = 1.06, 4.58) were independently associated with a reported lifetime diagnosis of TB. Conclusions. Mobility and migration are important factors in identifying and treating TB patients diagnosed in the US–Mexico border region. Strengthening capacity on both sides of the border to identify, monitor, and treat TB is a priority. PMID:19542040

  4. Literacies Crossing Borders: Transfronterizo Literacy Practices of Students in a Dual Language Program on the USA-Mexico Border

    ERIC Educational Resources Information Center

    de la Piedra, Maria Teresa; Araujo, Blanca E.

    2012-01-01

    Research on transnational literacies has generally focused on youth who live in one country and communicate using digital literacies across national boundaries. Our work contributes to this literature by providing a view of transnational literacies that are unique to the USA-Mexico border region. The students in this ethnographic study navigate…

  5. Cross-Border Choice as Identity Investment: Cases of Malaysian and Indonesian Ethnic Chinese Students in Hong Kong

    ERIC Educational Resources Information Center

    Choi, Pik Lin

    2008-01-01

    This article reports a case study on two ethnic Chinese students, one from Malaysia and one from Indonesia, who chose to pursue higher education in Hong Kong. By placing the students at the center of investigation against the social, political, economic, and educational contexts of their home countries, as well as the host territory, the present…

  6. Crossing borders: discussing the evidence relating to the mental health needs of women exposed to female genital mutilation.

    PubMed

    Mulongo, Peggy; McAndrew, Sue; Hollins Martin, Caroline

    2014-08-01

    The terms 'Female Circumcision' (FC), 'FG Cutting' (FGC) and 'FG Mutilation' (FGM) refer to procedures involving the partial or total removal of the external female genitalia for non-medical reasons. In practicing countries, FGC/FC is more widely used, as it is believed to be inoffensive, providing more impartial ways of discussing the practice. Positive beliefs about FC/FGC include virginity, marriage prospects, family reputation, or passage to adulthood. Regardless of terminology, the practice exists in at least 28 African counties, and a few Asian and Middle Eastern countries. In Western society, FGM is considered a breach of human rights, being outlawed in a number of countries. With immigration trends, FGC is now prominent in Western society among practicing communities. While the past decade has seen an increase in studies and recommendations for health-care support related to the physical health consequences of FGM, little is known about the psychological impact and its management. For many girls and women, FGC is a traumatic practice, transforming it to FGM and affecting their mental health. This discussion paper focuses on evidence relating to the mental health consequences of FGM, therapeutic interventions, and the mental health nurse's role in addressing the needs of this group of women. PMID:24548699

  7. Crossing Borders: A Qualitative Study of How Occupational Therapy Educators and Scholars Develop and Sustain Global Partnerships.

    PubMed

    Witchger Hansen, Anne Marie

    2015-09-01

    The World Federation of Occupational Therapists (WFOT) and the American Occupational Therapy Association promote a globally connected profession that responds to the needs of our diverse societies. Global partnerships are grounded on the principle that cross-cultural experiences are enriching and provide mutual benefits. The purpose of this study was to uncover how occupational therapy educators and scholars perceive and experience (1) developing and sustaining global partnerships and (2) lessons learned. In this qualitative study, 30 occupational therapy educators and researchers completed an online survey. Eight participated in an interview. Results found major themes that help develop and sustain partnerships: building relationship of trust and respect, communicating effectively, cultivating cultural competence, sharing power and resources with collaborators and creating a context for reciprocal learning. Lessons learned include a call to walking humbly, building relationships of trust and respect, establishing open and honest communication, supporting local solutions to local problems, ensuring equality of resources and learning from their global partners. The findings suggest that global partnerships have the potential to transform both partners if the partners engage with mutual understanding and respect. Limitations of this study include a small sample size and participant's pool limited to occupational therapists from United States. Recommendations for future research include qualitative studies to identify model occupational therapy programmes that sustain global partnerships using a diverse sample of international occupational therapy educators and researchers. PMID:26284574

  8. Cross-Border Distance Education (CBDE) in a Wired World: The Experience of a Student in Nigeria

    ERIC Educational Resources Information Center

    Fakinlede, Charity

    2012-01-01

    It is imperative for countries to provide quality education that would empower their people to compete and benefit from the growing socio-cultural global exchanges of the 21[superscript st] century. The Internet is expanding the global village, thereby, enhancing communication, collaboration and the cooperation of peoples with each other across…

  9. Crossing Borders: Learning and Teaching Primary Science in the Pre-Service to In-Service Transition.

    ERIC Educational Resources Information Center

    Mulholland, Judith; Wallace, John

    2003-01-01

    Reports on a 4-year longitudinal case study of two Australian primary science teachers during transition from preservice to inservice teaching. Interprets teachers' change and professional growth as instances of sub-cultural border crossing and the role in their construction of the borders crossed by beginning teachers. Proposes ways of assisting…

  10. S.461 — 114th Congress (2015-2016) Cross-Border Trade Enhancement Act of 2016

    THOMAS, 113th Congress

    Sen. Cornyn, John [R-TX

    2015-02-11

    08/30/2016 By Senator Johnson from Committee on Homeland Security and Governmental Affairs filed written report under authority of the order of the Senate of 07/14/2016. Report No. 114-303. (All Actions)

  11. "Learning Stories"--Crossing Borders: Introducing Qualitative Early Childhood Observation Techniques to Early Childhood Practitioners in Saudi Arabia

    ERIC Educational Resources Information Center

    Nyland, Berenice; Alfayez, Shatha

    2012-01-01

    Early childhood education has become a focus of government policy across the world. Part of the present increased interest in early childhood education has been a focus on curriculum frameworks and socio/cultural methods of assessment. Currently, New Zealand has emerged as a world leader in early childhood education, and observation and assessment…

  12. How History Becomes a Cross-Border Matter: Death Foretold of a French-German-Swiss Textbook

    ERIC Educational Resources Information Center

    Dupeyron, Bruno

    2009-01-01

    The middle of the 1990s saw the creation of a French-German-Swiss history textbook supported by the European Commission. Disseminated to school instructors in the Upper Rhine, it received generally positive reviews, but ended up on the dusty shelves of school libraries. This result was due to several factors, which are analysed in this article.…

  13. Crossing borders: Discussing the evidence relating to the mental health needs of women exposed to female genital mutilation

    PubMed Central

    Mulongo, Peggy; McAndrew, Sue; Hollins Martin, Caroline

    2014-01-01

    The terms ‘Female Circumcision’ (FC), ‘FG Cutting’ (FGC) and ‘FG Mutilation’ (FGM) refer to procedures involving the partial or total removal of the external female genitalia for non-medical reasons. In practicing countries, FGC/FC is more widely used, as it is believed to be inoffensive, providing more impartial ways of discussing the practice. Positive beliefs about FC/FGC include virginity, marriage prospects, family reputation, or passage to adulthood. Regardless of terminology, the practice exists in at least 28 African counties, and a few Asian and Middle Eastern countries. In Western society, FGM is considered a breach of human rights, being outlawed in a number of countries. With immigration trends, FGC is now prominent in Western society among practicing communities. While the past decade has seen an increase in studies and recommendations for health-care support related to the physical health consequences of FGM, little is known about the psychological impact and its management. For many girls and women, FGC is a traumatic practice, transforming it to FGM and affecting their mental health. This discussion paper focuses on evidence relating to the mental health consequences of FGM, therapeutic interventions, and the mental health nurse's role in addressing the needs of this group of women. PMID:24548699

  14. Cross-border contributions to obesity research and interventions: a review of Canadian and American occupational therapy contributions.

    PubMed

    Forhan, Mary; Gill, Simone

    2013-04-01

    This paper identifies the contributions of Canadian and American occupational therapists to the empirical discourse on obesity. This scoping study includes an independent review of the published literature followed by a series of meetings during which key themes and contributions were categorized. The Person, Environment, Occupation, and Performance Model (Baum & Christiansen, 2005) was used to organize the themes reported in the literature. Although occupational therapists contribute to knowledge about body systems and functions as well as activity limitations and participation restrictions for persons with obesity, the majority of work has a focus on the environment and the person, with limited attention to occupation. Occupational therapy practitioners and researchers are contributing in areas valued in obesity research and practice but can do more to promote consideration of the interaction of personal, environmental, and occupational factors which may cause obesity or contribute to the participation in everyday living for persons with obesity. PMID:23855571

  15. Crossing Borders: Academic Refugee Women, Education and the British Federation of University Women during the Nazi Era

    ERIC Educational Resources Information Center

    Cohen, Susan

    2010-01-01

    This paper explores the educational experiences of a specific group of refugees, namely academic women refugees who were members of various branches of the International Federation of University Women, and who came to Britain under the auspices of the British Federation of University Women from 1933. As a result of voluntary or forced migration…

  16. Crossing Borders: The Coming of Age Experience in Josefina Lopez's "Simply Maria" and Jose Cruz Gonzalez's "The Highest Heaven."

    ERIC Educational Resources Information Center

    Aragon, Cecilia Josephine

    2002-01-01

    Examines the coming of age experiences in the protagonists in Josefina Lopez's play "Simply Maria" and Jose Cruz Gonzalez's play "The Highest Heaven." Highlights how two Mexican-American protagonists face the personal challenges of adolescent adjustment as well as the geopolitical difficulties of adapting to two distinct cultures. (PM)

  17. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  18. Deciphering the roles of multiple additives in organocatalyzed Michael additions.

    PubMed

    Günler, Z Inci; Companyó, Xavier; Alfonso, Ignacio; Burés, Jordi; Jimeno, Ciril; Pericàs, Miquel A

    2016-05-21

    The synergistic effects of multiple additives (water and acetic acid) on the asymmetric Michael addition of acetone to nitrostyrene catalyzed by primary amine-thioureas (PAT) were precisely determined. Acetic acid facilitates hydrolysis of the imine intermediates, thus leading to catalytic behavior, and minimizes the formation of the double addition side product. In contrast, water slows down the reaction but minimizes catalyst deactivation, eventually leading to higher final yields. PMID:27128165

  19. Enantioselective Michael Addition of Water

    PubMed Central

    Chen, Bi-Shuang; Resch, Verena; Otten, Linda G; Hanefeld, Ulf

    2015-01-01

    The enantioselective Michael addition using water as both nucleophile and solvent has to date proved beyond the ability of synthetic chemists. Herein, the direct, enantioselective Michael addition of water in water to prepare important β-hydroxy carbonyl compounds using whole cells of Rhodococcus strains is described. Good yields and excellent enantioselectivities were achieved with this method. Deuterium labeling studies demonstrate that a Michael hydratase catalyzes the water addition exclusively with anti-stereochemistry. PMID:25529526

  20. Color Addition and Subtraction Apps

    ERIC Educational Resources Information Center

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  1. 75 FR 27313 - Proposed Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED PROCUREMENT LIST Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed additions to the... or Severely Disabled, Jefferson Plaza 2, Suite 10800, 1421 Jefferson Davis Highway,...

  2. 40 CFR § 412.37 - Additional measures.

    Code of Federal Regulations, 2013 CFR

    2015-07-01

    ... contaminated storm water to the wastewater and manure storage and containment structure; (ii) Daily inspection... review upon request. (1) Expected crop yields; (2) The date(s) manure, litter, or process waste water is... following application; (4) Test methods used to sample and analyze manure, litter, process waste water,...

  3. Color Addition and Subtraction Apps

    NASA Astrophysics Data System (ADS)

    Ruiz, Frances; Ruiz, Michael J.

    2015-10-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step in understanding mathematical representations of RGB color. Finally, color addition and subtraction are presented for the X11 colors from web design to illustrate yet another real-life application of color mixing.

  4. Calculators and Computers: Graphical Addition.

    ERIC Educational Resources Information Center

    Spero, Samuel W.

    1978-01-01

    A computer program is presented that generates problem sets involving sketching graphs of trigonometric functions using graphical addition. The students use calculators to sketch the graphs and a computer solution is used to check it. (MP)

  5. Polyolefins as additives in plastics

    SciTech Connect

    Deanin, R.D.

    1993-12-31

    Polyolefins are not only major commodity plastics - they are also very useful as additives, both in other polyolefins and also in other types of plastics. This review covers ethylene, propylene, butylene and isobutylene polymers, in blends with each other, and as additives to natural rubber, styrene/butadiene rubber, polystyrene, polyvinyl chloride, polymethyl methacrylate, polyphenylene oxide, polycarbonate, thermoplastic polyesters, polyurethanes, polyamides, and mixed automotive plastics recycling.

  6. Characteristics of Si Solar Cells with the Addition of Frits and Additives to Al Pastes

    NASA Astrophysics Data System (ADS)

    Kim, Dongsun; Kim, Jongwoo; Lee, Jungki; Kim, Hyungsun

    2011-11-01

    Thick Al films are used widely as the backside electrode material of Si solar cells. The formation of Al and a back surface field reduce the back-surface recombination and improve the cell performance. This study examined the characteristics of Si solar cells with the addition of frits and additives to Al pastes after firing. The reactions among Al powders, frits and additives were studied. The wetting behavior between each powder (Al powder, frit, additive) and Si, Al substrates was also measured as a function of the temperature. These preliminary studies show that the frits affect the adhesion between Al and Si. In addition, the proper additives prevent the bowing of Si wafer.

  7. A polymeric flame retardant additive for rubbers

    SciTech Connect

    Ghosh, S.N.; Maiti, S.

    1993-12-31

    Synthesis of a polyphosphonate by the interfacial polymerization of bisphenol-A (BPA) and dichloro-phenyl phosphine oxide (DCPO) using cetyltrimethyl ammonium chloride (TMAC) as phase transfer catalyst (PTC) was reported. The polyphosphonate was characterized by elemental analysis, IR, TGA, DSC and 1H-NMR spectroscopy. The flame retardancy of the polymer was done by OI study. The polymer was used as a fire retardant additive to rubbers such as natural rubber (NR), styrene-butadiene rubber(SBR), nitrile rubber (NBR) and chloroprene rubber (CR). The efficiency of the fire retardant property of this additive was determined by LOI measurements of the various rubber samples.

  8. ADDITIVITY ASSESSMENT OF TRIHALOMETHANE MIXTURES BY PROPORTIONAL RESPONSE ADDITION

    EPA Science Inventory

    If additivity is known or assumed, the toxicity of a chemical mixture may be predicted from the dose response curves of the individual chemicals comprising the mixture. As single chemical data are abundant and mixture data sparse, mixture risk methods that utilize single chemical...

  9. [INVITED] Lasers in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Pinkerton, Andrew J.

    2016-04-01

    Additive manufacturing is a topic of considerable ongoing interest, with forecasts predicting it to have major impact on industry in the future. This paper focusses on the current status and potential future development of the technology, with particular reference to the role of lasers within it. It begins by making clear the types and roles of lasers in the different categories of additive manufacturing. This is followed by concise reviews of the economic benefits and disadvantages of the technology, current state of the market and use of additive manufacturing in different industries. Details of these fields are referenced rather than expanded in detail. The paper continues, focusing on current indicators to the future of additive manufacturing. Barriers to its development, trends and opportunities in major industrial sectors, and wider opportunities for its development are covered. Evidence indicates that additive manufacturing may not become the dominant manufacturing technology in all industries, but represents an excellent opportunity for lasers to increase their influence in manufacturing as a whole.

  10. Evaluation of certain food additives.

    PubMed

    2015-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, and to prepare specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for eight food additives (Benzoe tonkinensis; carrageenan; citric and fatty acid esters of glycerol; gardenia yellow; lutein esters from Tagetes erecta; octenyl succinic acid-modified gum arabic; octenyl succinic acid-modified starch; paprika extract; and pectin) and eight groups of flavouring agents (aliphatic and alicyclic hydrocarbons; aliphatic and aromatic ethers; ionones and structurally related substances; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; phenol and phenol derivatives; phenyl-substituted aliphatic alcohols and related aldehydes and esters; and sulfur-containing heterocyclic compounds). Specifications for the following food additives were revised: citric acid; gellan gum; polyoxyethylene (20) sorbitan monostearate; potassium aluminium silicate; and Quillaia extract (Type 2). Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of all of the food additives and flavouring agents considered at this meeting. PMID:26118220

  11. Manipulating crystallization with molecular additives.

    PubMed

    Shtukenberg, Alexander G; Lee, Stephanie S; Kahr, Bart; Ward, Michael D

    2014-01-01

    Given the importance of organic crystals in a wide range of industrial applications, the chemistry, biology, materials science, and chemical engineering communities have focused considerable attention on developing methods to control crystal structure, size, shape, and orientation. Tailored additives have been used to control crystallization to great effect, presumably by selectively binding to particular crystallographic surfaces and sites. However, substantial knowledge gaps still exist in the fundamental mechanisms that govern the formation and growth of organic crystals in both the absence and presence of additives. In this review, we highlight research discoveries that reveal the role of additives, either introduced by design or present adventitiously, on various stages of formation and growth of organic crystals, including nucleation, dislocation spiral growth mechanisms, growth inhibition, and nonclassical crystal morphologies. The insights from these investigations and others of their kind are likely to guide the development of innovative methods to manipulate crystallization for a wide range of materials and applications. PMID:24579880

  12. Additive Manufacturing of Hybrid Circuits

    NASA Astrophysics Data System (ADS)

    Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David; Hirschfeld, Deidre; Hall, Aaron C.; Bell, Nelson S.

    2016-07-01

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects. Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. Finally, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.

  13. Tougher Addition Polyimides Containing Siloxane

    NASA Technical Reports Server (NTRS)

    St. Clair, T. L.; Maudgal, S.

    1986-01-01

    Laminates show increased impact resistances and other desirable mechanical properties. Bismaleamic acid extended by reaction of diaminosiloxane with maleic anhydride in 1:1 molar ratio, followed by reaction with half this molar ratio of aromatic dianhydride. Bismaleamic acid also extended by reaction of diaminosiloxane with maleic anhydride in 1:2 molar ratio, followed by reaction with half this molar ratio of aromatic diamine (Michael-addition reaction). Impact resistances improved over those of unmodified bismaleimide, showing significant increase in toughness. Aromatic addition polyimides developed as both matrix and adhesive resins for applications on future aircraft and spacecraft.

  14. Additional first-trimester ultrasound markers.

    PubMed

    Sonek, J; Nicolaides, K

    2010-09-01

    The first trimester (11-13 +6 weeks) ultrasound examination is useful for several reasons: determination of an accurate date of confinement, diagnostic purposes, and screening for fetal defects. Nuchal translucency measurement combined with maternal serum markers (free b-human chorionic gonadotropin and pregnancy-associated plasma protein A) is the mainstay of first-trimester screening for chromosomal defects. However, over the past decade additional ultrasound markers have been developed that improve the performance of this type of screening. The novel markers include evaluation of the nasal bone, fronto-maxillary angle measurement, and Doppler evaluations of the blood flow across the tricuspid valve and in the ductus venosus. PMID:20638573

  15. Computational Process Modeling for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Bagg, Stacey; Zhang, Wei

    2014-01-01

    Computational Process and Material Modeling of Powder Bed additive manufacturing of IN 718. Optimize material build parameters with reduced time and cost through modeling. Increase understanding of build properties. Increase reliability of builds. Decrease time to adoption of process for critical hardware. Potential to decrease post-build heat treatments. Conduct single-track and coupon builds at various build parameters. Record build parameter information and QM Meltpool data. Refine Applied Optimization powder bed AM process model using data. Report thermal modeling results. Conduct metallography of build samples. Calibrate STK models using metallography findings. Run STK models using AO thermal profiles and report STK modeling results. Validate modeling with additional build. Photodiode Intensity measurements highly linear with power input. Melt Pool Intensity highly correlated to Melt Pool Size. Melt Pool size and intensity increase with power. Applied Optimization will use data to develop powder bed additive manufacturing process model.

  16. Promoting Additive Acculturation in Schools.

    ERIC Educational Resources Information Center

    Gibson, Margaret A.

    1995-01-01

    A study focusing on 113 ninth graders of Mexican descent indicates that most students and their parents adhere to a strategy of additive acculturation (incorporating skills of the new culture and language), but that the school curriculum and general school climate devalue Mexican culture. (SLD)

  17. Individualized Additional Instruction for Calculus

    ERIC Educational Resources Information Center

    Takata, Ken

    2010-01-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the…

  18. The Additive Property of Energy.

    ERIC Educational Resources Information Center

    Tsaoussis, Dimitris S.

    1995-01-01

    Presents exercises that analyze the additive property of energy. Concludes that if a body has more than one component of energy depending on the same physical quantity, the body's total energy will be the algebraic sum of the components if a linear relationship exists between the energy components and that physical quantity. (JRH)

  19. Tinkertoy Color-Addition Device.

    ERIC Educational Resources Information Center

    Ferguson, Joe L.

    1995-01-01

    Describes construction and use of a simple home-built device, using an overhead projector, for use in demonstrations of the addition of various combinations of red, green, and blue light. Useful in connection with discussions of color, color vision, or color television. (JRH)

  20. Silage Additives and Management Issues

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Inoculants are the most common silage additives in the United States. These products contain lactic acid bacteria to supplement the lactic acid bacteria naturally on the crop and help insure a consistent fermentation in the silo. There are three types of inoculants: homofermentative lactic acid bact...

  1. Tetrasulfide extreme pressure lubricant additives

    SciTech Connect

    Gast, L.E.; Kenney, H.E.; Schwab, A.W.

    1980-08-19

    A novel class of compounds has been prepared comprising the tetrasulfides of /sup 18/C hydrocarbons, /sup 18/C fatty acids, and /sup 18/C fatty and alkyl and triglyceride esters. These tetrasulfides are useful as extreme pressure lubricant additives and show potential as replacements for sulfurized sperm whale oil.

  2. Evaluation of certain food additives.

    PubMed

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  3. Decontamination formulation with sorbent additive

    DOEpatents

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  4. Robust stability under additive perturbations

    NASA Technical Reports Server (NTRS)

    Bhaya, A.; Desoer, C. A.

    1985-01-01

    A MIMO linear time-invariant feedback system 1S(P,C) is considered which is assumed to be U-stable. The plant P is subjected to an additive perturbation Delta P which is proper but not necessarily stable. It is proved that the perturbed system is U-stable if and only if Delta P(I + Q x Delta P) exp -1 is U-stable.

  5. Additive manufacturing of hybrid circuits

    DOE PAGESBeta

    Bell, Nelson S.; Sarobol, Pylin; Cook, Adam; Clem, Paul G.; Keicher, David M.; Hirschfeld, Deidre; Hall, Aaron Christopher

    2016-03-26

    There is a rising interest in developing functional electronics using additively manufactured components. Considerations in materials selection and pathways to forming hybrid circuits and devices must demonstrate useful electronic function; must enable integration; and must complement the complex shape, low cost, high volume, and high functionality of structural but generally electronically passive additively manufactured components. This article reviews several emerging technologies being used in industry and research/development to provide integration advantages of fabricating multilayer hybrid circuits or devices. First, we review a maskless, noncontact, direct write (DW) technology that excels in the deposition of metallic colloid inks for electrical interconnects.more » Second, we review a complementary technology, aerosol deposition (AD), which excels in the deposition of metallic and ceramic powder as consolidated, thick conformal coatings and is additionally patternable through masking. As a result, we show examples of hybrid circuits/devices integrated beyond 2-D planes, using combinations of DW or AD processes and conventional, established processes.« less

  6. Evaluation of certain food additives.

    PubMed

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  7. 10 CFR 70.65 - Additional content of applications.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Additional content of applications. 70.65 Section 70.65... Material § 70.65 Additional content of applications. (a) In addition to the contents required by § 70.22... performance requirements of § 70.61, including a description of the management measures; the requirements...

  8. Additional evidence of Mercurian volcanism

    USGS Publications Warehouse

    Trask, N.J.; Strom, R.G.

    1976-01-01

    Evidence concerned with (1) the character and distribution of terrain surrounding fresh basins, (2) albedo, color and temporal differences between a basin rim and smooth plains on its floor, and (3) the stratigraphic relations and local distribution of smooth plains in the hilly and lineated terrain are cited as additional evidence for an internal origin of much of the Mercurian smooth plains. Altough the question of Mercurian volcanism should be kept open, this evidence together with that presented in an earlier paper suggests that volcanism occurred on Mercury early in its history. ?? 1976.

  9. Individualized additional instruction for calculus

    NASA Astrophysics Data System (ADS)

    Takata, Ken

    2010-10-01

    College students enrolling in the calculus sequence have a wide variance in their preparation and abilities, yet they are usually taught from the same lecture. We describe another pedagogical model of Individualized Additional Instruction (IAI) that assesses each student frequently and prescribes further instruction and homework based on the student's performance. Our study compares two calculus classes, one taught with mandatory remedial IAI and the other without. The class with mandatory remedial IAI did significantly better on comprehensive multiple-choice exams, participated more frequently in classroom discussion and showed greater interest in theorem-proving and other advanced topics.

  10. Water based drilling mud additive

    SciTech Connect

    McCrary, J.L.

    1983-12-13

    A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

  11. Metal Additive Manufacturing: A Review

    NASA Astrophysics Data System (ADS)

    Frazier, William E.

    2014-06-01

    This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables distributed manufacturing and the productions of parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. This paper explores the material science, processes, and business consideration associated with achieving these performance gains. It is concluded that a paradigm shift is required in order to fully exploit AM potential.

  12. Nitrogen oxide abatement by distributed fuel addition

    SciTech Connect

    Wendt, J.O.L.; Meraab, J.

    1988-03-25

    The purpose of this project is to develop techniques for nitrogen oxides abatement by distributed fuel addition. The major nitrogen oxide of interest is Nitric Oxide (NO), a precursor to premature forest damage and to acid rain. Recently interest has also been evoked with respect to an additional oxide of nitrogen, namely Nitrous Oxide (N{sub 2}O). Therefore, abatement measures for NO{sub x} are being investigated to determine their influence on N{sub 2}O as well. This report briefly describes the significance of N{sub 2}O emissions to the environment and the urgent need to develop techniques that can reduce emissions of both NO and N{sub 2}O. Reburning through distributed fuel addition may be an effective technique for NO{sub x} (mainly NO) emission control as described in the previous quarterly report. Reburning may also be effective in reducing N{sub 2}O levels. A technique for N{sub 2}O measurement by gas chromatography/electron capture detection was developed during this quarter, and is described in this report. This analysis technique will be used in the proposed experimental study to investigate the effectiveness of reburning on N{sub 2}O control.

  13. Additive manufacturing of RF absorbers

    NASA Astrophysics Data System (ADS)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  14. High Flow Addition Curing Polyimides

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Vannucci, Raymond D.; Ansari, Irfan; Cerny, Lawrence L.; Scheiman, Daniel A.

    1994-01-01

    A new series of high flow PMR-type addition curing polyimides was developed, which employed the substitution of 2,2'-bis (trifluoromethyl) -4,4'-diaminobiphenyl (BTDB) for p-phenylenediamine (p -PDA) in a PMR-IL formulation. These thermoset polyimides, designated as 12F resins, were prepared from BTDB and the dimethyl ester of 4,4'- (hexafluo- roisopropylidene) -diphthalic acid (HFDE) with either nadic ester (NE) or p-aminostyrene (PAS) as the endcaps for addition curing. The 12F prepolymers displayed lower melting temperatures in DSC analysis, and higher melt flow in rheological studies than the cor- responding PMR-11 polyimides. Long-term isothermal aging studies showed that BTDB- based 12F resins exhibited comparable thermo-oxidative stability to P-PDA based PMR-11 polyimides. The noncoplanar 2- and 2'-disubstituted biphenyldiamine (BTDB) not only lowered the melt viscosities of 12F prepolymers, but also retained reasonable thermal sta- bility of the cured resins. The 12F polyimide resin with p-aminostyrene endcaps showed the best promise for long-term, high-temperature application at 343 C (650 F).

  15. Neutron Characterization for Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  16. Additives in fibers and fabrics.

    PubMed

    Barker, R H

    1975-06-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  17. Additives in fibers and fabrics.

    PubMed Central

    Barker, R H

    1975-01-01

    The additives and contaminants which occur in textile fibers vary widely, depending on the type of fiber and the pretreatment which it has received. Synthetic fibers such as nylon and polyester contain trace amounts of contaminants such as catalysts and catalyst deactivators which remain after the synthesis of the basic polymers. In addition, there are frequently a number of materials which are added to perform specific functions in almost all man-made fibers. Examples of these would include traces of metals or metal salts used as tracers for identification of specific lots of fiber, TiO2 or similar materials added as delustrants, and a host of organic species added for such special purposes as antistatic agents or flame retardants. There may also be considerable quantities of residual monomer or small oligomers dissolved in the polymer matrix. The situation becomes even more complex after the fibers are converted into fabric form. Numerous materials are applied at various stages of fabric preparation to act as lubricants, sizing agents, antistats, bleaches, and wetting agents to facilitate the processing, but these are normally removed before the fabric reaches the cutters of the ultimate consumers and therefore usually do not constitute potential hazards. However, there are many other chemical agents which are frequently added during the later stages of fabric preparation and which are not designed to be removed. Aside from dyes and printing pigments, the most common additive for apparel fabrics is a durable press treatment. This generally involves the use of materials capable of crosslinking cellulosics by reacting through such functions as N-methylolated amides or related compounds such as ureas and carbamates. These materials pose some potential hazards due to both the nitrogenous bases and the formaldehyde which they usually release. There is usually also some residual catalyst in fabrics which have received such treatments. Other types of chemical treatments

  18. Metrology Needs for Metal Additive Manufacturing Powders

    NASA Astrophysics Data System (ADS)

    Slotwinski, John A.; Garboczi, Edward J.

    2015-03-01

    Additive manufacturing (AM) processes can produce highly complex and customized parts without the need for dedicated tooling and can produce parts directly from the part design information. These types of processes are poised to revolutionize the manufacturing industry, yet several challenges are currently preventing more widespread adoption of AM technologies. Among these challenges are metrology issues associated with the measurement and characterization of the metal powders used for AM systems. This article will describe the technical challenges and needs for characterizing metal AM powders, recent research efforts to address those needs, and current work to standardize characterization methods in ASTM and ISO, such as the recently released ASTM F3049, Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes.

  19. Consolidation of silicon nitride without additives

    NASA Technical Reports Server (NTRS)

    Sikora, P. F.; Yeh, H. C.

    1977-01-01

    The feasibility of producing a sound, dense Si3N4 body without additives was explored, using conventional gas hot isostatic pressing techniques and an uncommon hydraulic hot isostatic pressing technique. These two techniques produce much higher pressure 275-413 MN/m sq (40,000 - 60,000 psi) than hot-pressing techniques. Evaluation was based on density measurement, microscopic examination, both optical and electron, and X-ray diffraction analysis. The results are summarized as follows: (1) Si3N4 can be densified to high density, greater than 95% of theoretical, without additions. (2) The higher density Si3N4 specimens appear to be associated with a greater amount of alpha to beta transformation. (3) Under high pressure, the alpha to beta transformation can occur at a temperature as low as 1150 C. (4) Grain deformation and subsequent recrystallization and grain refinement result from hot isostatic pressing of Si3N4.

  20. A novel addition polyimide adhesive

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.; Progar, D. J.

    1981-01-01

    An addition polyimide adhesive, LARC 13, was developed which shows promise for bonding both titanium and composites for applications which require service temperatures in excess of 533 K. The LARC 13 is based on an oligomeric bis nadimide containing a meta linked aromatic diamine. The adhesive melts prior to polymerization due to its oligomeric nature, thereby allowing it to be processed at 344 kPa or less. Therefore, LARC 13 is ideal for the bonding of honeycomb sandwich structures. After melting, the resin thermosets during the cure of the nadic endcaps to a highly crosslinked system. Few volatiles are evolved, thus allowing large enclosed structures to be bonded. Preparation of the adhesive as well as bonding, aging, and testing of lap shear and honeycomb samples are discussed.

  1. Addition polyimide end cap study

    NASA Technical Reports Server (NTRS)

    St.clair, T. L.

    1980-01-01

    The characterization of addition polyimides with various end caps for adhesive applications at 120-250 C environments is discussed. Oligometric polyimides were prepared from 3,3',4,4'-benzophenone tetracarboxylic dianhydride and 3,3'-methylenedianiline which were end-capped with functionally reactive moities which cause crosslinking when the oligomers are heated to 200-400 C. The syntheses of the oligomers are outlined. The thermolysis of the oligomers was studied by differential scanning calorimetry and the resulting polymers were characterized by differential thermal analysis and adhesive performance. The adhesive data include lap shear strengths on titanium 6-4 adherends both before and after aging for 1000 hours at 121 C and/or 232 C.

  2. SIPSEY WILDERNESS AND ADDITIONS, ALABAMA.

    USGS Publications Warehouse

    Schweinfurth, Stanley P.; Mory, Peter C.

    1984-01-01

    On the basis of geologic, geochemical, and mineral surveys the Sipsey Wilderness and additions are deemed to have little promise for the occurrence of metallic mineral resources. Although limestone, shale, and sandstone resources that occur in the area are physically suitable for a variety of uses, similar materials are available outside the area closer to transportation routes and potential markets. A small amount of coal has been identified in the area, occurring as nonpersistent beds less than 28 in. thick. Oil and (or) natural gas resources may be present if suitable structural traps exist in the subsurface. Therefore, the area has a probable oil and gas potential. Small amounts of asphaltic sandstone and limestone, commonly referred to as tar sands, may also occur in the subsurface. 5 refs.

  3. Adverse reactions to food additives.

    PubMed

    Simon, R A

    1986-01-01

    There are thousands of agents that are intentionally added to the food that we consume. These include preservatives, stabilizers, conditioners, thickeners, colorings, flavorings, sweeteners, antioxidants, etc. etc. Yet only a surprisingly small number have been associated with hypersensitivity reactions. Amongst all the additives, FD&C dyes have been most frequently associated with adverse reactions. Tartrazine is the most notorious of them all; however, critical review of the medical literature and current Scripps Clinic studies would indicate that tartrazine has been confirmed to be at best only occasionally associated with flares of urticaria or asthma. There is no convincing evidence in the literature of reactivity to the other azo or nonazo dyes. This can also be said of BHA/BHT, nitrites/nitrates and sorbates. Parabens have been shown to elicit IgE mediated hypersensitivity reactions when used as pharmaceutical preservatives; however, as with the other additives noted above, ingested parabens have only occasionally been associated with adverse reactions. MSG, the cause of the 'Chinese restaurant syndrome' has only been linked to asthma in one report. Sulfiting agents used primarily as food fresheners and to control microbial growth in fermented beverages have been established as the cause of any where from mild to severe and even fatal reactions in at least 5% of the asthmatic population. Other reactions reported to follow sulfite ingestion include anaphylaxis, gastro intestinal complaints and dermatological eruptions. The prevalence of these non asthmatic reactions is unknown. The mechanism of sulfite sensitive asthma is also unknown but most likely involves hyperreactivity to inhale SO2 in the great majority of cases; however, there are reports of IgE mediated reactions and other sulfite sensitive asthmatics have been found with low levels of sulfite oxidase; necessary to oxidize endogenous sulfite to sulfate. PMID:3302664

  4. Additionality of global benefits and financial additionality in the context of the AIJ negotiations

    SciTech Connect

    Puhl, I.

    1996-12-31

    The Conference of the Party at their first meeting (COP1) took a decision regarding criteria for joint implementation as indicated in Art. 4.2 (a) of the FCCC which established a pilot phase for activities implemented jointly (AIJ) under the pilot phase. Besides some more technical issues this decision specified that such measures should bring about real, measurable and long-term environmental benefits related to the mitigation of climate change that would not have occurred in the absence of such activities. It also established that the financing of AIJ shall be additional to the financial obligations of developed country parties. These two requirements are called the additionality criteria for AIJ. The first refers to the realness of GHG emission abatement (which means reduction compared to a baseline) whereas the second describes that funds earmarked for AIJ have no other objective (i.e. profit making, export promotion) but to reduce GHG emissions to avoid the free-riding of investors and subsequently developed country parties. The reporting framework as well as the reporting requirements under national programs do not specify further the two types of additionality and even though research focuses on issues like baseline determination there has been no attempt so far to identify approaches which contribute towards defining strict and practicable methods and guidelines to frame additionality criteria. The first FCCC assessment of pilot project reporting revealed that in the reporting of activities, emissions additionality often remained unclear, especially in cases where AIJ was only a portion of an existing or already planned project, and that there is a point about how to account for financial additionality. It subsequently proposed to develop a uniform approach to baseline determination and the assessment of emission (reduction) additionality and financial additionality.

  5. Characterizing neuromorphologic alterations with additive shape functionals

    NASA Astrophysics Data System (ADS)

    Barbosa, M. S.; Costa, L. Da F.; Bernardes, E. S.; Ramakers, G.; van Pelt, J.

    2004-01-01

    The complexity of a neuronal cell shape is known to be related to its function. Specifically, among other indicators, a decreased complexity in the dendritic trees of cortical pyramidal neurons has been associated with mental retardation. In this paper we develop a procedure to address the characterization of morphological changes induced in cultured neurons by over-expressing a gene involved in mental retardation. Measures associated with the multiscale connectivity, an additive image functional, are found to give a reasonable separation criterion between two categories of cells. One category consists of a control group and two transfected groups of neurons, and the other, a class of cat ganglionary cells. The reported framework also identified a trend towards lower complexity in one of the transfected groups. Such results establish the suggested measures as an effective descriptors of cell shape.

  6. Additively manufactured porous tantalum implants.

    PubMed

    Wauthle, Ruben; van der Stok, Johan; Amin Yavari, Saber; Van Humbeeck, Jan; Kruth, Jean-Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-03-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of its good biocompatibility. In this study selective laser melting technology was used for the first time to manufacture highly porous pure tantalum implants with fully interconnected open pores. The architecture of the porous structure in combination with the material properties of tantalum result in mechanical properties close to those of human bone and allow for bone ingrowth. The bone regeneration performance of the porous tantalum was evaluated in vivo using an orthotopic load-bearing bone defect model in the rat femur. After 12 weeks, substantial bone ingrowth, good quality of the regenerated bone and a strong, functional implant-bone interface connection were observed. Compared to identical porous Ti-6Al-4V structures, laser-melted tantalum shows excellent osteoconductive properties, has a higher normalized fatigue strength and allows for more plastic deformation due to its high ductility. It is therefore concluded that this is a first step towards a new generation of open porous tantalum implants manufactured using selective laser melting. PMID:25500631

  7. Sustainability Characterization for Additive Manufacturing

    PubMed Central

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  8. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  9. Sustainability Characterization for Additive Manufacturing.

    PubMed

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  10. Additive attacks on speaker recognition

    NASA Astrophysics Data System (ADS)

    Farrokh Baroughi, Alireza; Craver, Scott

    2014-02-01

    Speaker recognition is used to identify a speaker's voice from among a group of known speakers. A common method of speaker recognition is a classification based on cepstral coefficients of the speaker's voice, using a Gaussian mixture model (GMM) to model each speaker. In this paper we try to fool a speaker recognition system using additive noise such that an intruder is recognized as a target user. Our attack uses a mixture selected from a target user's GMM model, inverting the cepstral transformation to produce noise samples. In our 5 speaker data base, we achieve an attack success rate of 50% with a noise signal at 10dB SNR, and 95% by increasing noise power to 0dB SNR. The importance of this attack is its simplicity and flexibility: it can be employed in real time with no processing of an attacker's voice, and little computation is needed at the moment of detection, allowing the attack to be performed by a small portable device. For any target user, knowing that user's model or voice sample is sufficient to compute the attack signal, and it is enough that the intruder plays it while he/she is uttering to be classiffed as the victim.

  11. Nitrogen oxide abatement by distributed fuel addition

    SciTech Connect

    Wendt, J.O.L.; Meraab, J.

    1988-06-27

    This research is directed towards the development of engineering guidelines that define the application of distributed fuel addition as a technique for NOx abatement. It is expected that multiple fuel and air addition in the post-flame of a combustion process will increase free radical concentrations which destroy nitrogenous species and thus help them decay toward their equilibrium concentrations, which can be very low in that region of the combustor. Screening experiments were conducted on a laboratory scale downfired combustor. The objective was to compare NOx emissions arising from various combustion configurations, including fuel and/or air staging. Although the primary focus of this research is on NO control, a secondary effort was directed towards the measurement of N2O emissions from various coal combustion processes. N2O has been identified as a trace gas responsible for stratospheric ozone depletion, and has been hypothesized to arise from combustion processes, in amounts roughly proportional to NO emissions. Results presented in this report showed that the ratio N2O/NO was far from constant. The introduction of secondary air into a combustion process was accompanied an increase in N2O emissions. The measured N2O was always less than 10 ppm even under the most favorable combustion conditions. Reburning with premixed fuel and air mixtures was not effective in reducing NO emissions.

  12. Additive manufacturing of glass for optical applications

    NASA Astrophysics Data System (ADS)

    Luo, Junjie; Gilbert, Luke J.; Bristow, Douglas A.; Landers, Robert G.; Goldstein, Jonathan T.; Urbas, Augustine M.; Kinzel, Edward C.

    2016-04-01

    Glasses including fused quartz have significant scientific and engineering applications including optics, communications, electronics, and hermetic seals. This paper investigates a filament fed process for Additive Manufacturing (AM) of fused quartz. Additive manufacturing has several potential benefits including increased design freedom, faster prototyping, and lower processing costs for small production volumes. However, current research in AM of glasses is limited and has focused on non-optical applications. Fused quartz is studied here because of its desirability for high-quality optics due to its high transmissivity and thermal stability. Fused quartz also has a higher working temperature than soda lime glass which poses a challenge for AM. In this work, fused quartz filaments are fed into a CO2 laser generated melt pool, smoothly depositing material onto the work piece. Single tracks are printed to explore the effects that different process parameters have on the morphology of printed fused quartz. A spectrometer is used to measure the thermal radiation incandescently emitted from the melt pool. Thin-walls are printed to study the effects of layer-to-layer height. Finally, a 3D fused quartz cube is printed using the newly acquired layer height and polished on each surface. The transmittance and index homogeneity of the polished cube are both measured. These results show that the filament fed process has the potential to print fused quartz with optical transparency and of index of refraction uniformity approaching bulk processed glass.

  13. The Probabilistic Admissible Region with Additional Constraints

    NASA Astrophysics Data System (ADS)

    Roscoe, C.; Hussein, I.; Wilkins, M.; Schumacher, P.

    The admissible region, in the space surveillance field, is defined as the set of physically acceptable orbits (e.g., orbits with negative energies) consistent with one or more observations of a space object. Given additional constraints on orbital semimajor axis, eccentricity, etc., the admissible region can be constrained, resulting in the constrained admissible region (CAR). Based on known statistics of the measurement process, one can replace hard constraints with a probabilistic representation of the admissible region. This results in the probabilistic admissible region (PAR), which can be used for orbit initiation in Bayesian tracking and prioritization of tracks in a multiple hypothesis tracking framework. The PAR concept was introduced by the authors at the 2014 AMOS conference. In that paper, a Monte Carlo approach was used to show how to construct the PAR in the range/range-rate space based on known statistics of the measurement, semimajor axis, and eccentricity. An expectation-maximization algorithm was proposed to convert the particle cloud into a Gaussian Mixture Model (GMM) representation of the PAR. This GMM can be used to initialize a Bayesian filter. The PAR was found to be significantly non-uniform, invalidating an assumption frequently made in CAR-based filtering approaches. Using the GMM or particle cloud representations of the PAR, orbits can be prioritized for propagation in a multiple hypothesis tracking (MHT) framework. In this paper, the authors focus on expanding the PAR methodology to allow additional constraints, such as a constraint on perigee altitude, to be modeled in the PAR. This requires re-expressing the joint probability density function for the attributable vector as well as the (constrained) orbital parameters and range and range-rate. The final PAR is derived by accounting for any interdependencies between the parameters. Noting that the concepts presented are general and can be applied to any measurement scenario, the idea

  14. A Comparison of Diets Supplemented with a Feed Additive Containing Organic Acids, Cinnamaldehyde and a Permeabilizing Complex, or Zinc Oxide, on Post-Weaning Diarrhoea, Selected Bacterial Populations, Blood Measures and Performance in Weaned Pigs Experimentally Infected with Enterotoxigenic E. coli †

    PubMed Central

    Stensland, Ingunn; Kim, Jae Cheol; Bowring, Bethany; Collins, Alison M.; Mansfield, Josephine P.; Pluske, John R.

    2015-01-01

    Simple Summary This experiment was conducted to assess the effects of three diets on diarrhoea, performance (weight change, feed intake and feed conversion ratio), selected bacterial populations and blood measures of weaner pigs infected with enterotoxigenic E. coli. The three diets were: base diet (no antimicrobial compounds), base diet containing zinc oxide, and base diet containing a feed additive (blend of organic acids, cinnamaldehyde and permeabilizing complex). Only feeding zinc oxide decreased diarrhoea, with zinc oxide-fed pigs performing better than base diet-fed pigs. Zinc oxide-fed pigs performed similarly to pigs fed the organic acids, cinnamaldehyde and permeabilizing complex. Significant interactions between treatment and day after weaning were found for some bacterial populations, although the implications of such findings require further examination. Abstract The effects of feeding a diet supplemented with zinc oxide (ZnO) or a blend of organic acids, cinnamaldehyde and a permeabilizing complex (OACP) on post-weaning diarrhoea (PWD) and performance in pigs infected with enterotoxigenic E. coli (ETEC) were examined. Additionally, changes in selected bacterial populations and blood measures were assessed. A total of 72 pigs weaned at 22 d of age and weighing 7.2 ± 1.02 kg (mean ± SEM) was used. Treatments were: base diet (no antimicrobial compounds); base diet + 3 g ZnO/kg; base diet + 1.5 g OACP/kg. Dietary treatments started on the day of weaning and were fed ad libitum for 3 weeks. All pigs were infected with an F4 ETEC on d 4, 5 and 6 after weaning. The incidence of PWD was lower in pigs fed ZnO (p = 0.026). Overall, pigs fed ZnO grew faster (p = 0.013) and ate more (p = 0.004) than the base diet-fed pigs, with OACP-fed pigs performing the same (p > 0.05) as both the ZnO- and base diet-fed pigs. Feed conversion ratio was similar for all diets (p > 0.05). The percentage of E. coli with F4 fimbriae was affected a day by treatment interaction (p

  15. Additive Cellular Automata and Volume Growth

    NASA Astrophysics Data System (ADS)

    Ward, Thomas B.

    2000-09-01

    A class of dynamical systems associated to rings of S-integers in rational function fields is described. General results about these systems give a rather complete description of the well-known dynamics in one-dimensional additive cellular automata with prime alphabet, including simple formulæ for the topological entropy and the number of periodic configurations. For these systems the periodic points are uniformly distributed along some subsequence with respect to the maximal measure, and in particular are dense. Periodic points may be constructed arbitrarily close to a given configuration, and rationality of the dynamical zeta function is characterized. Throughout the emphasis is to place this particular family of cellular automata into the wider context of S-integer dynamical systems, and to show how the arithmetic of rational function fields determines their behaviour. Using a covering space the dynamics of additive cellular automata are related to a form of hyperbolicity in completions of rational function fields. This expresses the topological entropy of the automata directly in terms of volume growth in the covering space.

  16. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  17. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  18. 16 CFR 1102.16 - Additional information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PUBLICLY AVAILABLE CONSUMER PRODUCT SAFETY INFORMATION DATABASE Content Requirements § 1102.16 Additional... in the Database any additional information it determines to be in the public interest,...

  19. A Comparison of Diets Supplemented with a Feed Additive Containing Organic Acids, Cinnamaldehyde and a Permeabilizing Complex, or Zinc Oxide, on Post-Weaning Diarrhoea, Selected Bacterial Populations, Blood Measures and Performance in Weaned Pigs Experimentally Infected with Enterotoxigenic E. coli.

    PubMed

    Stensland, Ingunn; Kim, Jae Cheol; Bowring, Bethany; Collins, Alison M; Mansfield, Josephine P; Pluske, John R

    2015-01-01

    The effects of feeding a diet supplemented with zinc oxide (ZnO) or a blend of organic acids, cinnamaldehyde and a permeabilizing complex (OACP) on post-weaning diarrhoea (PWD) and performance in pigs infected with enterotoxigenic E. coli (ETEC) were examined. Additionally, changes in selected bacterial populations and blood measures were assessed. A total of 72 pigs weaned at 22 d of age and weighing 7.2 ± 1.02 kg (mean ± SEM) was used. Treatments were: base diet (no antimicrobial compounds); base diet + 3 g ZnO/kg; base diet + 1.5 g OACP/kg. Dietary treatments started on the day of weaning and were fed ad libitum for 3 weeks. All pigs were infected with an F4 ETEC on d 4, 5 and 6 after weaning. The incidence of PWD was lower in pigs fed ZnO ( p = 0.026). Overall, pigs fed ZnO grew faster ( p = 0.013) and ate more ( p = 0.004) than the base diet-fed pigs, with OACP-fed pigs performing the same ( p > 0.05) as both the ZnO- and base diet-fed pigs. Feed conversion ratio was similar for all diets ( p > 0.05). The percentage of E. coli with F4 fimbriae was affected a day by treatment interaction ( p = 0.037), with more E. coli with F4 fimbriae found in pigs fed ZnO on d 11 ( p = 0.011) compared to base diet-fed pigs. Only significant time effects ( p < 0.05) occurred for blood measures. Under the conditions of this study, inclusion of OACP gave statistically similar production responses to pigs fed ZnO, however pigs fed ZnO had less PWD compared to OACP- and the base diet-fed pigs. PMID:26610577

  20. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives produced or sold for use in motor vehicle gasoline and/or motor vehicle diesel fuel are hereby designated... persons or property on a street or highway. For purposes of this registration, however,...

  1. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives produced or sold for use in motor vehicle gasoline and/or motor vehicle diesel fuel are hereby designated... persons or property on a street or highway. For purposes of this registration, however,...

  2. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives produced or sold for use in motor vehicle gasoline and/or motor vehicle diesel fuel are hereby designated... persons or property on a street or highway. For purposes of this registration, however,...

  3. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives produced or sold for use in motor vehicle gasoline and/or motor vehicle diesel fuel are hereby designated... persons or property on a street or highway. For purposes of this registration, however,...

  4. 40 CFR 79.31 - Additives.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... OF FUELS AND FUEL ADDITIVES Designation of Fuels and Additives § 79.31 Additives. (a) All additives produced or sold for use in motor vehicle gasoline and/or motor vehicle diesel fuel are hereby designated... persons or property on a street or highway. For purposes of this registration, however,...

  5. Multilevel Interventions: Measurement and Measures

    PubMed Central

    Charns, Martin P.; Alligood, Elaine C.; Benzer, Justin K.; Burgess, James F.; Mcintosh, Nathalie M.; Burness, Allison; Partin, Melissa R.; Clauser, Steven B.

    2012-01-01

    Background Multilevel intervention research holds the promise of more accurately representing real-life situations and, thus, with proper research design and measurement approaches, facilitating effective and efficient resolution of health-care system challenges. However, taking a multilevel approach to cancer care interventions creates both measurement challenges and opportunities. Methods One-thousand seventy two cancer care articles from 2005 to 2010 were reviewed to examine the state of measurement in the multilevel intervention cancer care literature. Ultimately, 234 multilevel articles, 40 involving cancer care interventions, were identified. Additionally, literature from health services, social psychology, and organizational behavior was reviewed to identify measures that might be useful in multilevel intervention research. Results The vast majority of measures used in multilevel cancer intervention studies were individual level measures. Group-, organization-, and community-level measures were rarely used. Discussion of the independence, validity, and reliability of measures was scant. Discussion Measurement issues may be especially complex when conducting multilevel intervention research. Measurement considerations that are associated with multilevel intervention research include those related to independence, reliability, validity, sample size, and power. Furthermore, multilevel intervention research requires identification of key constructs and measures by level and consideration of interactions within and across levels. Thus, multilevel intervention research benefits from thoughtful theory-driven planning and design, an interdisciplinary approach, and mixed methods measurement and analysis. PMID:22623598

  6. Volatile organic compounds in Tijuana during the Cal-Mex 2010 campaign: Measurements and source apportionment

    NASA Astrophysics Data System (ADS)

    Zheng, Jun; Garzón, Jessica P.; Huertas, María E.; Zhang, Renyi; Levy, Misti; Ma, Yan; Huertas, José I.; Jardón, Ricardo T.; Ruíz, Luis G.; Tan, Haobo; Molina, Luisa T.

    2013-05-01

    As part of the Cal-Mex 2010 air quality study, a proton transfer reaction-mass spectrometer (PTR-MS) was deployed at the San Diego-Tijuana border area to measure volatile organic compounds (VOCs) from 15 May to 30 June 2010. The major VOCs identified during the study included oxygenated VOCs (e.g., methanol, acetaldehyde, acetone, and methyl ethyl ketone) and aromatics (e.g., benzene, toluene, C8- and C9-aromatics). Biogenic VOCs (e.g., isoprene) were scarce in this region because of the lack of vegetation in this arid area. Using an U.S. EPA positive matrix factorization model, VOCs together with other trace gases (NOx, NOz and SO2) observed in this border region were attributed to four types of sources, i.e., local industrial solvent usage (58% in ppbC), gasoline vehicle exhaust (19% in ppbC), diesel vehicle exhaust (14% in ppbC), and aged plume (9% in ppbC) due to regional background and/or long-range transport. Diesel vehicle emission contributed to 87% of SO2 and 75% of NOx, and aged plume contributed to 92% of NOz. An independent conditional probability function analysis of VOCs, wind direction, and wind speed indicated that the industrial source did not show a significant tendency with wind direction. Both gasoline and diesel engine emissions were associated with air masses passing through two busy cross-border ports. Aged plumes were strongly associated with NW wind, which likely brought in aged air masses from the populated San Diego area.

  7. Evaluating Three Different Methods of Determining Addition in Presbyopia

    PubMed Central

    Yazdani, Negareh; Khorasani, Abbas Azimi; Moghadam, Hanieh Mirhajian; Yekta, Abbas Ali; Ostadimoghaddam, Hadi; Shandiz, Javad Heravian

    2016-01-01

    Purpose: To compare three different methods for determining addition in presbyopes. Methods: The study included 81 subjects with presbyopia who aged 40-70 years. Reading addition values were measured using 3 approaches including the amplitude of accommodation (AA), dynamic retinoscopy (DR), and increasing plus lens (IPL). Results: IPL overestimated reading addition relative to other methods. Mean near addition obtained by AA, DR and IPL were 1.31, 1.68 and 1.77, respectively. Our results showed that IPL method could provide 20/20 vision at near in the majority of presbyopic subjects (63.4%). Conclusion: The results were approximately the same for 3 methods and provided comparable final addition; however, mean near additions were higher with increasing plus lens compared with the other two methods. In presbyopic individuals, increasing plus lens is recommended as the least time-consuming method with the range of ±0.50 diopter at the 40 cm working distance. PMID:27621785

  8. Experimental Study of Additives on Viscosity biodiesel at Low Temperature

    NASA Astrophysics Data System (ADS)

    Fajar, Berkah; Sukarno

    2015-09-01

    An experimental investigation was performed to find out the viscosity of additive and biodiesel fuel mixture in the temperature range from 283 K to 318 K. Solutions to reduce the viscosity of biodiesel is to add the biodiesel with some additive. The viscosity was measured using a Brookfield Rheometer DV-II. The additives were the generic additive (Diethyl Ether/DDE) and the commercial additive Viscoplex 10-330 CFI. Each biodiesel blends had a concentration of the mixture: 0.0; 0.25; 0.5; 0.75; 1.0; and 1.25% vol. Temperature of biodiesel was controlled from 40°C to 0°C. The viscosity of biodiesel and additive mixture at a constant temperature can be approximated by a polynomial equation and at a constant concentration by exponential equation. The optimum mixture is at 0.75% for diethyl ether and 0.5% for viscoplex.

  9. Additional historical solid rocket motor burns

    NASA Astrophysics Data System (ADS)

    Wiedemann, Carsten; Homeister, Maren; Oswald, Michael; Stabroth, Sebastian; Klinkrad, Heiner; Vörsmann, Peter

    2009-06-01

    The use of orbital solid rocket motors (SRM) is responsible for the release of a high number of slag and Al 2O 3 dust particles which contribute to the space debris environment. This contribution has been modeled for the ESA space debris model MASTER (Meteoroid and Space Debris Terrestrial Environment Reference). The current model version, MASTER-2005, is based on the simulation of 1076 orbital SRM firings which mainly contributed to the long-term debris environment. SRM firings on very low earth orbits which produce only short living particles are not considered. A comparison of the modeled flux with impact data from returned surfaces shows that the shape and quantity of the modeled SRM dust distribution matches that of recent Hubble Space Telescope (HST) solar array measurements very well. However, the absolute flux level for dust is under-predicted for some of the analyzed Long Duration Exposure Facility (LDEF) surfaces. This indicates that some past SRM firings are not included in the current event database. Thus it is necessary to investigate, if additional historical SRM burns, like the retro-burn of low orbiting re-entry capsules, may be responsible for these dust impacts. The most suitable candidates for these firings are the large number of SRM retro-burns of return capsules. This paper focuses on the SRM retro-burns of Russian photoreconnaissance satellites, which were used in high numbers during the time of the LDEF mission. It is discussed which types of satellites and motors may have been responsible for this historical contribution. Altogether, 870 additional SRM retro-burns have been identified. An important task is the identification of such missions to complete the current event data base. Different types of motors have been used to de-orbit both large satellites and small film return capsules. The results of simulation runs are presented.

  10. Ultrafast amplifier additive timing jitter characterization and control.

    PubMed

    Casanova, Alexis; D'Acremont, Quentin; Santarelli, Giorgio; Dilhaire, Stefan; Courjaud, Antoine

    2016-03-01

    We report on the characterization and long-term compensation of additive timing jitter introduced by a femtosecond ytterbium regenerative amplifier with a 100 kHz repetition rate. A balanced optical cross-correlation technique is used to generate a jitter error signal. This approach is well suited to characterize the additive timing jitter of Yb amplifiers seeded by narrow spectrum Yb oscillators. The balanced optical cross-correlator is in a noncollinear configuration allowing a background free coindence detection. This setup enables the measurement of additive timing jitter from the amplifier, with a noise floor of 300 as integrated from 10 Hz to 10 kHz. The measured additive timing jitter level is about 5 fs, integrated from 0.1 Hz to 10 kHz. The amplifier timing drift characterization and control are performed for more than an hour. PMID:26974074

  11. Additive Manufacturing of Aerospace Propulsion Components

    NASA Technical Reports Server (NTRS)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  12. 47 CFR 25.111 - Additional information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Additional information. 25.111 Section 25.111... Applications and Licenses General Application Filing Requirements § 25.111 Additional information. (a) The Commission may request from any party at any time additional information concerning any application, or...

  13. 20 CFR 901.72 - Additional rules.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Additional rules. 901.72 Section 901.72... Additional rules. The Joint Board may, in notice or other guidance of general applicability, provide additional rules regarding the enrollment of actuaries. Effective Date Note: At 76 FR 17776, Mar. 31,...

  14. 17 CFR 48.10 - Additional contracts.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false Additional contracts. 48.10... FOREIGN BOARDS OF TRADE § 48.10 Additional contracts. (a) Generally. A registered foreign board of trade that wishes to make an additional futures, option or swap contract available for trading by...

  15. 17 CFR 48.10 - Additional contracts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 2 2014-04-01 2014-04-01 false Additional contracts. 48.10...) REGISTRATION OF FOREIGN BOARDS OF TRADE § 48.10 Additional contracts. (a) Generally. A registered foreign board of trade that wishes to make an additional futures, option or swap contract available for trading...

  16. 46 CFR 355.5 - Additional material.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Additional material. 355.5 Section 355.5 Shipping... STATES CITIZENSHIP § 355.5 Additional material. If additional material is determined to be essential to clarify or support the evidence of U.S. citizenship, such material shall be furnished by...

  17. 20 CFR 802.215 - Additional briefs.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Additional briefs. 802.215 Section 802.215 Employees' Benefits BENEFITS REVIEW BOARD, DEPARTMENT OF LABOR RULES OF PRACTICE AND PROCEDURE Prereview Procedures Initial Processing § 802.215 Additional briefs. Additional briefs may be filed or ordered in...

  18. 77 FR 49783 - Procurement List; Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-17

    ... INFORMATION: Additions On 6/15/2012 (77 FR 35942-35944) and 6/22/2012 (77 FR 37659-37660), the Committee for... PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Additions to the Procurement List. SUMMARY:...

  19. 7 CFR 1944.545 - Additional grants.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 13 2011-01-01 2009-01-01 true Additional grants. 1944.545 Section 1944.545...) PROGRAM REGULATIONS (CONTINUED) HOUSING Technical and Supervisory Assistance Grants § 1944.545 Additional grants. An additional grant may be made to an applicant that has previously received a TSA grant and...

  20. 20 CFR 802.215 - Additional briefs.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Additional briefs. 802.215 Section 802.215 Employees' Benefits BENEFITS REVIEW BOARD, DEPARTMENT OF LABOR RULES OF PRACTICE AND PROCEDURE Prereview Procedures Initial Processing § 802.215 Additional briefs. Additional briefs may be filed or ordered in...