Sri Lanka Wind Farm Analysis and Site Selection Assistance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, M.; Vilhauer, R.

2003-08-01

The United States Department of Energy (DOE), through the National Renewable Energy Laboratory (NREL), has been working in partnership with the U.S. Agency for International Development (USAID) in an on-going process to quantify the Sri Lanka wind energy potential and foster wind energy development. Work to date includes completion of the NREL wind atlas for Sri Lanka. In addition, the Ceylon Electricity Board (CEB) has conducted a wind resource assessment of several areas of the country and has successfully completed and is currently operating a 3-MW pilot wind project. A review of the work completed to date indicates that additionalmore » activities are necessary to provide Sri Lanka with the tools necessary to identify the best wind energy development opportunities. In addition, there is a need to identify key policy, regulatory, business and infrastructure issues that affect wind energy development and to recommend steps to encourage and support wind power development and investment.« less

Implications for VocED of Changing Work Arrangements.

ERIC Educational Resources Information Center

Hawke, Geof

The definition of work has undergone a massive transition within the last decade, and this trend has major implications for vocational education. Earlier ideas of work included that it was full-time, permanent, and for life; in addition, work provided opportunities for career development, a clearly-defined employer-worker relationship, and clear…

Cognitive precursors of arithmetic development in primary school children with cerebral palsy.

PubMed

Van Rooijen, M; Verhoeven, L; Smits, D W; Dallmeijer, A J; Becher, J G; Steenbergen, B

2014-04-01

The aim of this study was to examine the development of arithmetic performance and its cognitive precursors in children with CP from 7 till 9 years of age. Previous research has shown that children with CP are generally delayed in arithmetic performance compared to their typically developing peers. In children with CP, the developmental trajectory of the ability to solve addition- and subtraction tasks has, however, rarely been studied, as well as the cognitive factors affecting this trajectory. Sixty children (M=7.2 years, SD=.23 months at study entry) with CP participated in this study. Standardized tests were administered to assess arithmetic performance, word decoding skills, non-verbal intelligence, and working memory. The results showed that the ability to solve addition- and subtraction tasks increased over a two year period. Word decoding skills were positively related to the initial status of arithmetic performance. In addition, non-verbal intelligence and working memory were associated with the initial status and growth rate of arithmetic performance from 7 till 9 years of age. The current study highlights the importance of non-verbal intelligence and working memory to the development of arithmetic performance of children with CP. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Development of High Temperature Thermoplastic Composite Materials for Additive Manufactured Autoclave Tooling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kunc, Vlastimil; Duty, Chad E.; Lindahl, John M.

2017-08-01

In this work, ORNL and Techmer investigated and screened different high temperature thermoplastic reinforced materials to fabricate composite molds for autoclave processes using Additive Manufacturing (AM) techniques. This project directly led to the development and commercial release of two printable, high temperature composite materials available through Techmer PM. These new materials are targeted for high temperature tooling made via large scale additive manufacturing.

Commentary: Race Man and Philosopher of Education--A Reflection on W.E.B. Du Bois

ERIC Educational Resources Information Center

Gordon, Edmund W.; Watkins, L'Tanya M.

2017-01-01

The brilliantly developed emphasis in the work of Dr. W.E.B. Du Bois on race and the political economy has led many of his readers to misunderstand and underestimate his additional important contributions to and perspectives on education. In addition, some of his work not commonly read by educators as well as his unpublished musings from later…

Institute for High Heat Flux Removal (IHHFR). Phases I, II, and III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Ronald D.

2014-08-31

The IHHFR focused on interdisciplinary applications as it relates to high heat flux engineering issues and problems which arise due to engineering systems being miniaturized, optimized, or requiring increased high heat flux performance. The work in the IHHFR focused on water as a coolant and includes: (1) the development, design, and construction of the high heat flux flow loop and facility; (2) test section development, design, and fabrication; and, (3) single-side heat flux experiments to produce 2-D boiling curves and 3-D conjugate heat transfer measurements for single-side heated test sections. This work provides data for comparisons with previously developed andmore » new single-side heated correlations and approaches that address the single-side heated effect on heat transfer. In addition, this work includes the addition of single-side heated circular TS and a monoblock test section with a helical wire insert. Finally, the present work includes: (1) data base expansion for the monoblock with a helical wire insert (only for the latter geometry), (2) prediction and verification using finite element, (3) monoblock model and methodology development analyses, and (4) an alternate model development for a hypervapotron and related conjugate heat transfer controlling parameters.« less

Marine Science Aids the Development of Antifouling Coatings,

DTIC Science & Technology

new toxic additives, tributyltin antifouling compounds and biocidal organometallic polymers. Future developments which may arise from fundamental biochemical research work on marine organisms are indicated. (Author)

DEVELOPING STATE POLICIES SUPPORTIVE OF BIOENERGY DEVELOPMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kathryn Baskin

2004-10-31

Working within the context of the Southern States Biobased Alliance (SSBA) and with officials in each state, the Southern States Energy Board (SSEB) is identifying bioenergy-related policies and programs within each state to determine their impact on the development, deployment or use of bioenergy. In addition, SSEB will determine which policies have impacted industry's efforts to develop, deploy or use biobased technologies or products. As a result, SSEB will work with the Southern States Biobased Alliance to determine how policy changes might address any negative impacts or enhance positive impacts. In addition to analysis of domestic policies and programs, thismore » project will include the development of a U.S.-Brazil Biodiesel Pilot Project. The purpose of this effort is to promote and facilitate the commercialization of biodiesel and bioenergy production and demand in Brazil.« less

Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

NASA Technical Reports Server (NTRS)

Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

2016-01-01

NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

Competencies for a Leadership Role in Educational Development

ERIC Educational Resources Information Center

Verbeke, Kristi J.

2014-01-01

Because the field of educational development (also known as faculty development, academic development, and staff development) is relatively new, very little is known about the competencies required for those who work in the field. Additionally, there are no formal pathways or means of formal preparation for educational developers. This study…

Group Work: How to Use Groups Effectively

ERIC Educational Resources Information Center

Burke, Alison

2011-01-01

Many students cringe and groan when told that they will need to work in a group. However, group work has been found to be good for students and good for teachers. Employers want college graduates to have developed teamwork skills. Additionally, students who participate in collaborative learning get better grades, are more satisfied with their…

Minimize Solvent Oxidation with NO X Pre-Scrubbing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sexton, Andrew; Sachde, Darshan; Vance, Austyn

A novel method to remove nitrogen dioxide (NO 2) from the flue gas of coal-fired power plants with CO 2 capture was further developed for commercial implementation. The technology leverages the equipment and chemistry in an existing (sulfur dioxide) SO 2 polishing scrubber upstream of the main CO 2 capture unit to remove the NO 2, preventing degradation of the CO 2 capture solvent and formation of nitrosamines (environmental hazards). The research in this report focuses on further evaluation of the chemical additives and operating conditions associated with the NO 2 removal process to define conditions for commercial scale testingmore » and deployment. Experimental work systematically evaluated a series of potential additives to minimize the oxidation of sulfite in a representative SO 2 pre-scrubber solution (sulfite, in turn, absorbs NO 2). The additive combinations and concentrations were varied alongside important process conditions such as temperature, oxygen concentration, and metals present in solution to mimic the conditions expected in a commercial system. Important results of the parametric experimental work include identifying a new, potent sulfite oxidation inhibitor, revealing the importance of combining inhibitors with metal chelating agents, validation of a low-cost additive process, and development of a new semi-empirical model to represent mechanisms associated with sulfite oxidation. In addition, the experimental work reveled the impact of operating at higher temperatures (representative of a field test unit), which will guide the selection and concertation of additives as well. Engineering analysis found that waste solutions from the pre-scrubber with NO 2 additives may potentially be integrated with existing processes on site (e.g., flue gas desulfurization unit). In addition, techno-economic analysis identified potential net savings as large as $1.30/tonne CO 2 captured and quantified the potential benefit of low cost additive options actively being pursued by the development team. Finally, the experimental results and engineering analysis supported the development of a detailed field testing plan and protocol to evaluate the technology at near-commercial scale. The field test preparation included development of procedures to introduce chemical additives to an existing SO 2 polishing unit and identification of representative flue gas conditions based on a review of existing plants. These activities will have direct bearing on operation and design of commercial units.« less

The many faces of sex work.

PubMed

Harcourt, C; Donovan, B

2005-06-01

To compile a global typography of commercial sex work. A Medline search and review of 681 "prostitution" articles was conducted. In addition, the investigators pooled their 20 years of collected papers and monographs, and their observations in more than 15 countries. Arbitrary categories were developed to compile a workable typology of sex work. At least 25 types of sex work were identified according to worksite, principal mode of soliciting clients, or sexual practices. These types of work are often grouped under the headings of "direct" and "indirect" prostitution, with the latter group less likely to be perceived or to perceive themselves as sex workers. In general, policing sex work can change its typology and location but its prevalence is rarely affected. The public health implications of sex work vary widely. Developing comprehensive sexual health promotion programmes requires a complete understanding of the types of sex work in a particular area. This study provides a checklist for developing appropriate and targeted programmes.

Single-shot work extraction in quantum thermodynamics revisited

NASA Astrophysics Data System (ADS)

Wang, Shang-Yung

2018-01-01

We revisit the problem of work extraction from a system in contact with a heat bath to a work storage system, and the reverse problem of state formation from a thermal system state in single-shot quantum thermodynamics. A physically intuitive and mathematically simple approach using only elementary majorization theory and matrix analysis is developed, and a graphical interpretation of the maximum extractable work, minimum work cost of formation, and corresponding single-shot free energies is presented. This approach provides a bridge between two previous methods based respectively on the concept of thermomajorization and a comparison of subspace dimensions. In addition, a conceptual inconsistency with regard to general work extraction involving transitions between multiple energy levels of the work storage system is clarified and resolved. It is shown that an additional contribution to the maximum extractable work in those general cases should be interpreted not as work extracted from the system, but as heat transferred from the heat bath. Indeed, the additional contribution is an artifact of a work storage system (essentially a suspended ‘weight’ that can be raised or lowered) that does not truly distinguish work from heat. The result calls into question the common concept that a work storage system in quantum thermodynamics is simply the quantum version of a suspended weight in classical thermodynamics.

Study on thermal effects & sulfurized additives, in lubricating greases

NASA Astrophysics Data System (ADS)

Shah, Ami Atul

Lithium Base grease constitutes about 50% of market. The greases are developed to be able to work in multiple working conditions and have longer working life. Greases with extreme pressure additives and anti-wear additives have been developed as a solution to many of the applications. These developed greases are tested under ASTM D2266 testing conditions to meet the requirements. The actual working conditions, although, differ than the real testing conditions. The loading, speed and temperature conditions can be more harsh, or fluctuating in nature. The cyclic nature of the parameters cannot be directly related to the test performance. For this purpose studies on the performance under spectrum loading, variable speed and fluctuating temperature must be performed. This study includes tests to understand the effect of thermal variation on some of the most commonly used grease additives that perform well under ASTM D2266 testing conditions. The studied additives include most widely used industrial extreme pressure additive MoS2. Performance of ZDDP which is trying to replace MoS2 in its industrial applications has also been studied. The tests cover study of extreme pressure, anti-wear and friction modifier additives to get a general idea on the effects of thermal variation in three areas. Sulphur is the most common extreme pressure additive. Sulphur based MoS 2 is extensively used grease additive. Study to understand the tribological performance of this additive through wear testing and SEM/EDX studies has been done. This performance is also studied for other metallic sulfides like WS2 and sulphur based organic compound. The aim is to study the importance of the type of bond that sulphur shares in its additive's structure on its performance. The MoS2 film formation is found to be on the basis of the FeS formation on the substrate and protection through sacrificial monolayer deposition of the MoS2 sheared structure. The free Mo then tends to oxidise. An attempt to understand the effects of the addition of sulphur from a sulfurized olefin to MoS2 through mechanical processing has been conducted. This mechanically processed additive mixed is tested through regular ASTM D2266 test. The hypothesis was to make more shear able MoS 2 layers available by using the sulphur from the olefin to form the basic FeS layer that reduces the continuous wear rate. The results have been studied using SEM and EDX imaging.

Prepolymer Characterization

DTIC Science & Technology

1988-10-01

and ZIP Code) 10 SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNIT ELEMENT NO. NO. NO ACCESSION NO. 62302f ---5730 - o 00 AN 11. TITLE (Include...32 Preparative-Scale Reverse-Phase LC Fractionation of Polystyrene Homologs ..................................... 35 Work -Up of...were also employed. In addition, much of the work was based upon R-45M. However, the fundamental analytical developments and resultant practical

Work Program. Fiscal Year 1969 for The Department of the Army. Research and Development in Training, Motivation, and Leadership

DTIC Science & Technology

1969-01-01

job requiremeits in these skills , and (2) developing technique.; for improving literacy skills through training. In addition, manpower pools for a given...job requirements in these skills , and (2) developing techniques for improving literacy skills through training. In addition, manpower pools for a...visual and psychomotor skills -for accurate .nd’efficient operation, and performance variations among gunners are the largest source of error in system

The Meaning and Measurement of Work Fatigue: Development and Evaluation of the Three-Dimensional Work Fatigue Inventory (3D-WFI)

PubMed Central

Frone, Michael R.; Tidwell, Marie-Cecile O.

2015-01-01

Although work fatigue represents an important construct in several substantive areas, prior conceptual definitions and measures have been inadequate in a number of ways. The goals of the present study were to develop a conceptual definition and outline the desirable characteristics of a work fatigue measure; briefly examine several prior measures of work fatigue-related constructs; and develop and evaluate a new measure of work fatigue. The Three-Dimensional Work Fatigue Inventory (3D-WFI) provides separate and commensurate assessments of physical, mental, and emotional work fatigue. Results from a pilot study (N = 207) and a broader evaluative study of U.S. wage and salary workers (N = 2,477) suggest that the 3D-WFI is psychometrically sound and evinces a meaningful pattern of relations with variables that comprise the nomological network of work fatigue. As with all new measures, additional research is required to evaluate fully the utility of the 3D-WFI in research on work fatigue. PMID:25602275

Pretense and Possibility--A Theoretical Proposal about the Effects of Pretend Play on Development: Comment on Lillard et al. (2013)

ERIC Educational Resources Information Center

Walker, Caren M.; Gopnik, Alison

2013-01-01

The review by Lillard et al. (2013) highlighted the need for additional research to better clarify the nature of the relationship between pretend play and development. However, the authors did not provide a proposal for how to structure the direction of this future work. Here, we provide a possible framework for generating additional research.…

Biomass Direct Liquefaction Options. TechnoEconomic and Life Cycle Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tews, Iva J.; Zhu, Yunhua; Drennan, Corinne

The purpose of this work was to assess the competitiveness of two biomass to transportation fuel processing routes, which were under development in Finland, the U.S. and elsewhere. Concepts included fast pyrolysis (FP), and hydrothermal liquefaction (HTL), both followed by hydrodeoxygenation, and final product refining. This work was carried out as a collaboration between VTT (Finland), and PNNL (USA). The public funding agents for the work were Tekes in Finland and the Bioenergy Technologies Office of the U.S. Department of Energy. The effort was proposed as an update of the earlier comparative technoeconomic assessment performed by the IEA Bioenergy Directmore » Biomass Liquefaction Task in the 1980s. New developments in HTL and the upgrading of the HTL biocrude product triggered the interest in reinvestigating this comparison of these biomass liquefaction processes. In addition, developments in FP bio-oil upgrading had provided additional definition of this process option, which could provide an interesting comparison.« less

Development of crayfish bio-based plastic materials processed by small-scale injection moulding.

PubMed

Felix, Manuel; Romero, Alberto; Cordobes, Felipe; Guerrero, Antonio

2015-03-15

Protein has been investigated as a source for biodegradable polymeric materials. This work evaluates the development of plastic materials based on crayfish and glycerol blends, processed by injection moulding, as a fully biodegradable alternative to conventional polymer-based plastics. The effect of different additives, namely sodium sulfite or bisulfite as reducing agents, urea as denaturing agent and L-cysteine as cross-linking agent, is also analysed. The incorporation of any additive always yields an increase in energy efficiency at the mixing stage, but its effect on the mechanical properties of the bioplastics is not so clear, and even dampened. The additive developing a greater effect is L-cysteine, showing higher Young's modulus values and exhibiting a remnant thermosetting potential. Thus, processing at higher temperature yields a remarkable increase in extensibility. This work illustrates the feasibility of crayfish-based green biodegradable plastics, thereby contributing to the search for potential value-added applications for this by-product. © 2014 Society of Chemical Industry.

Micro-Slit Collimators for X-Ray/Gamma-Ray Imaging

NASA Technical Reports Server (NTRS)

Appleby, Michael; Fraser, Iain; Klinger, Jill

2011-01-01

A hybrid photochemical-machining process is coupled with precision stack lamination to allow for the fabrication of multiple ultra-high-resolution grids on a single array substrate. In addition, special fixturing and etching techniques have been developed that allow higher-resolution multi-grid collimators to be fabricated. Building on past work of developing a manufacturing technique for fabricating multi-grid, high-resolution coating modulation collimators for arcsecond and subarcsecond x-ray and gamma-ray imaging, the current work reduces the grid pitch by almost a factor of two, down to 22 microns. Additionally, a process was developed for reducing thin, high-Z (tungsten or molybdenum) from the thinnest commercially available foil (25 microns thick) down to approximately equal to 10 microns thick using precisely controlled chemical etching

MOBILE EMISSIONS ASSESSMENT SYSTEM FOR URBAN AND REGIONAL EVALUATION

EPA Science Inventory

A working research model for Atlanta, GA has been developed by Georgia Tech, and is called the Mobile Emissions Assessment System for Urban and Regional Evaluation (MEASURE). The EPA Office of Research and Development has developed an additional implementation of the MEASURE res...

Multifunctional wall coating combining photocatalysis, self-cleaning and latent heat storage

NASA Astrophysics Data System (ADS)

Lucas, S. S.; Barroso de Aguiar, J. L.

2018-02-01

Mortars, one of the most common construction materials, have not received any substantial modification for many decades. This has changed in recent years; new compositions are now being developed, with new properties, using nano-additives, fibres and capsules. In this work, surfaces with new and innovative functionalities that promote energy savings and improve air quality have been developed and studied. Incorporation of phase change materials (PCM) and titanium dioxide (TiO2) nanoparticles in construction products is currently under study by different research groups. However, these studies only address their incorporation separately. Adding new additives into the mortar’s matrix can be complex—due to microstructural modifications that will influence both fresh and hardened state properties. Moving from a single additive to multiple additions, as in this study, increases the system’s complexity. Only with a good understanding of the microstructural properties, it is possible to add multiple additives (including nano and microparticles) to mortars, without damaging its final quality. This work demonstrates that a higher additive content is not always a guarantee of better results; lower additions can often provide a better compromise between performance and final mechanical properties. The results presented in this paper confirmed this and show that combining PCM microcapsules and TiO2 nanoparticles open a new path in the development of mortars with multiple functionalities. In this study, a new material with depolluting, self-cleaning and heat storage was created. For the development of new and innovative mortars, a proper balance of multiple additives, supported by the study of microstructural changes, can lead to an optimization of the compositions, ensuring that the mortar’s final properties are not affected.

Retirement: An Ego Alien View

ERIC Educational Resources Information Center

Frank, Helen

1977-01-01

Since knowledge of ego development can be used in professional work, a needed classification of attitudes toward the work ethic is advanced. A radical departure from our retirement policy towards those over 65 years of age requires additional competence on the part of counselors in the field of aging. (Author)

Monitoring psychosocial stress at work: development of the Psychosocial Working Conditions Questionnaire.

PubMed

Widerszal-Bazyl, M; Cieślak, R

2000-01-01

Many studies on the impact of psychosocial working conditions on health prove that psychosocial stress at work is an important risk factor endangering workers' health. Thus it should be constantly monitored like other work hazards. The paper presents a newly developed instrument for stress monitoring called the Psychosocial Working Conditions Questionnaire (PWC). Its structure is based on Robert Karasek's model of job stress (Karasek, 1979; Karasek & Theorell, 1990). It consists of 3 main scales Job Demands, Job Control, Social Support and 2 additional scales adapted from the Occupational Stress Questionnaire (Elo, Leppanen, Lindstrom, & Ropponen, 1992), Well-Being and Desired Changes. The study of 8 occupational groups (bank and insurance specialists, middle medical personnel, construction workers, shop assistants, government and self-government administration officers, computer scientists, public transport drivers, teachers, N = 3,669) indicates that PWC has satisfactory psychometrics parameters. Norms for the 8 groups were developed.

The many faces of sex work

PubMed Central

Harcourt, C; Donovan, B

2005-01-01

Objective: To compile a global typography of commercial sex work. Methods: A Medline search and review of 681 "prostitution" articles was conducted. In addition, the investigators pooled their 20 years of collected papers and monographs, and their observations in more than 15 countries. Arbitrary categories were developed to compile a workable typology of sex work. Results: At least 25 types of sex work were identified according to worksite, principal mode of soliciting clients, or sexual practices. These types of work are often grouped under the headings of "direct" and "indirect" prostitution, with the latter group less likely to be perceived or to perceive themselves as sex workers. In general, policing sex work can change its typology and location but its prevalence is rarely affected. The public health implications of sex work vary widely. Conclusion: Developing comprehensive sexual health promotion programmes requires a complete understanding of the types of sex work in a particular area. This study provides a checklist for developing appropriate and targeted programmes. PMID:15923285

Carbon Nanotube Chopped Fiber for Enhanced Properties in Additive Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menchhofer, Paul A.; Johnson, Joseph E.; Lindahl, John M.

2016-06-06

Nanocomp Technologies, Inc. is working with Oak Ridge National Laboratory to develop carbon nanotube (CNT) composite materials and evaluate their use in additive manufacturing (3D printing). The first phase demonstrated feasibility and improvements for carbon nanotube (CNT)- acrylonitrile butadiene styrene (ABS) composite filaments use in additive manufacturing, with potential future work centering on further improvements. By focusing the initial phase on standard processing methods (developed mainly for the incorporation of carbon fibers in ABS) and characterization techniques, a basis of knowledge for the incorporation of CNTs in ABS was learned. The ability to understand the various processing variables is criticalmore » to the successful development of these composites. From the degradation effects on ABS (caused by excessive temperatures), to the length of time the ABS is in the melt state, to the order of addition of constituents, and also to the many possible mixing approaches, a workable flow sequence that addresses each processing step is critical to the final material properties. Although this initial phase could not deal with each of these variables in-depth, a future study is recommended that will build on the lessons learned for this effort.« less

Working memory and proverb comprehension in adolescents with traumatic brain injury: a preliminary investigation.

PubMed

Moran, Catherine A; Nippold, Marilyn A; Gillon, Gail T

2006-04-01

This study investigated the relationship between working memory and comprehension of low-familiarity proverbs in adolescents with traumatic brain injury (TBI). Ten adolescents, aged 12-21 years who had suffered a TBI prior to the age of 10 years and 10 individually age-matched peers with typical development participated in the study. The participants listened to short paragraphs containing a proverb and interpreted the meaning of the proverb using a forced-choice task. In addition, participants engaged in a task that evaluated working memory ability. Analysis revealed that individuals with TBI differed from their non-injured peers in their understanding of proverbs. In addition, working memory capacity influenced performance for all participants. The importance of considering working memory when evaluating figurative language comprehension in adolescents with TBI is highlighted. Implications for future research, particularly with regard to varying working memory and task demands, are considered.

Early Childhood Development in Latin America and the Caribbean. World Bank Policy Research Working Paper 3869

ERIC Educational Resources Information Center

Schady, Norbert

2006-01-01

There is considerable evidence that young children in many developing countries suffer from profound deficits in nutrition, health, fine and gross motor skills, cognitive development, and socio-emotional development. Early childhood development (ECD) outcomes are important markers of the welfare of children. In addition, the deleterious effects of…

International Briefing 26: Training and Development in the Philippines

ERIC Educational Resources Information Center

Udani, Zenon Arthur S.; Sunio, Varsolo C.; Dado, Raul H.; Udani, Delia S.

2012-01-01

The Philippines has a population of more than 94 million. In addition, 10 million Filipinos work and live overseas. Filipino talent is ubiquitous overseas, working in offices, universities, hotels and restaurants, factories, shopping malls, theaters and arenas, and private homes around the world. The country's projected high rate of economic…

Asymmetric Aldol Additions: A Guided-Inquiry Laboratory Activity on Catalysis

ERIC Educational Resources Information Center

King, Jorge H. Torres; Wang, Hong; Yezierski, Ellen J.

2018-01-01

Despite the importance of asymmetric catalysis in both the pharmaceutical and commodity chemicals industries, asymmetric catalysis is under-represented in undergraduate chemistry laboratory curricula. A novel guided-inquiry experiment based on the asymmetric aldol addition was developed. Students conduct lab work to compare the effectiveness of…

EVALUATION OF FGD DRY INJECTION SORBENTS AND ADDITIVES - VOLUME 1 - DEVELOPMENT OF HIGH REACTIVITY SORBENTS

EPA Science Inventory

The report discusses recent work addressing lime enhancement by slurrying with siliceous materials and testing in a laboratory packed-bed reactor, as part of EPA's efforts to develop low cost, retrofit flue gas cleaning technology, including the development of highly reactive sor...

Studies on Vapor Adsorption Systems

NASA Technical Reports Server (NTRS)

Shamsundar, N.; Ramotowski, M.

1998-01-01

The project consisted of performing experiments on single and dual bed vapor adsorption systems, thermodynamic cycle optimization, and thermal modeling. The work was described in a technical paper that appeared in conference proceedings and a Master's thesis, which were previously submitted to NASA. The present report describes some additional thermal modeling work done subsequently, and includes listings of computer codes developed during the project. Recommendations for future work are provided.

Joint Planning and Development Office Work Plan FY10

DTIC Science & Technology

2010-01-01

IPSA ) Division will make refinements to the NextGen Portfolio Analysis. In addition, IPSA will work with the Department of Defense (DoD) to define and...Submitted Interagency Portfolio and Systems Analysis ( IPSA ) DRAFT DoD Portfolio Analysis Criteria BASELINE DoD Portfolio Analysis Criteria DRAFT...WG Work Plan Review Prototype Capability Selected and Defined CHAs Complete Safety Metrics for IPSA Complete FINAL Prototype Report FINAL

The meaning and measurement of work fatigue: Development and evaluation of the Three-Dimensional Work Fatigue Inventory (3D-WFI).

PubMed

Frone, Michael R; Tidwell, Marie-Cecile O

2015-07-01

Although work fatigue represents an important construct in several substantive areas, prior conceptual definitions and measures have been inadequate in a number of ways. The goals of the present study were to develop a conceptual definition and outline the desirable characteristics of a work fatigue measure, briefly examine several prior measures of work fatigue-related constructs, and develop and evaluate a new measure of work fatigue. The Three-Dimensional Work Fatigue Inventory (3D-WFI) provides separate and commensurate assessments of physical, mental, and emotional work fatigue. Results from a pilot study (n = 207) and a broader evaluative study of U.S. wage and salary workers (n = 2,477) suggest that the 3D-WFI is psychometrically sound and evinces a meaningful pattern of relations with variables that comprise the nomological network of work fatigue. As with all new measures, additional research is required to evaluate fully the utility of the 3D-WFI in research on work fatigue. (c) 2015 APA, all rights reserved).

Development of the Transportation Revenue Estimator and Needs Determination System (TRENDS) forecasting model : MPO sub-models and maintenance.

DOT National Transportation Integrated Search

2011-11-01

This report summarizes the technical work performed developing and incorporating Metropolitan Planning : Organization sub-models into the existing Texas Revenue Estimator and Needs Determination System : (TRENDS) model. Additionally, this report expl...

Developing Essential Understanding of Addition and Subtraction for Teaching Mathematics in Pre-K-Grade 2

ERIC Educational Resources Information Center

Karp, Karen; Caldwell, Janet; Zbiek, Rose Mary; Bay-Williams, Jennifer

2011-01-01

What is the relationship between addition and subtraction? How do individuals know whether an algorithm will always work? Can they explain why order matters in subtraction but not in addition, or why it is false to assert that the sum of any two whole numbers is greater than either number? It is organized around two big ideas and supported by…

Multilevel and Hybrid Architecture for Device Abstraction and Context Information Management in Smart Home Environments

NASA Astrophysics Data System (ADS)

Peláez, Víctor; González, Roberto; San Martín, Luis Ángel; Campos, Antonio; Lobato, Vanesa

Hardware device management, and context information acquisition and abstraction are key factors to develop the ambient intelligent paradigm in smart homes. This work presents an architecture that addresses these two problems and provides a usable framework to develop applications easily. In contrast to other proposals, this work addresses performance issues specifically. Results show that the execution performance of the developed prototype is suitable for deployment in a real environment. In addition, the modular design of the system allows the user to develop applications using different techniques and different levels of abstraction.

Proposed work plan for the study of hydrologic effects of ground-water development in the Wet Mountain Valley, Colorado

USGS Publications Warehouse

Robson, S.G.

1985-01-01

Large-scale development of groundwater resources in the Wet Mountain Valley, Colorado, could adversely affect other water rights in the valley or in the Arkansas River Basin. Such infringement on senior water rights could severely limit development of additional water supplies in the valley. A work plan is presented for a study that is intended to define the hydrologic system in the valley better, and to determine the extent that the quantity and chemical quality of both surface and groundwater in the valley might be affected by proposed development. (USGS)

Straddling Interdisciplinary Seams: Working Safely in the Field, Living Dangerously With a Model

NASA Astrophysics Data System (ADS)

Light, B.; Roberts, A.

2016-12-01

Many excellent proposals for observational work have included language detailing how the proposers will appropriately archive their data and publish their results in peer-reviewed literature so that they may be readily available to the modeling community for parameterization development. While such division of labor may be both practical and inevitable, the assimilation of observational results and the development of observationally-based parameterizations of physical processes require care and feeding. Key questions include: (1) Is an existing parameterization accurate, consistent, and general? If not, it may be ripe for additional physics. (2) Do there exist functional working relationships between human modeler and human observationalist? If not, one or more may need to be initiated and cultivated. (3) If empirical observation and model development are a chicken/egg problem, how, given our lack of prescience and foreknowledge, can we better design observational science plans to meet the eventual demands of model parameterization? (4) Will the addition of new physics "break" the model? If so, then the addition may be imperative. In the context of these questions, we will make retrospective and forward-looking assessments of a now-decade-old numerical parameterization to treat the partitioning of solar energy at the Earth's surface where sea ice is present. While this so called "Delta-Eddington Albedo Parameterization" is currently employed in the widely-used Los Alamos Sea Ice Model (CICE) and appears to be standing the tests of accuracy, consistency, and generality, we will highlight some ideas for its ongoing development and improvement.

RESEARCH ASSOCIATED WITH THE DEVELOPMENT OF EPA METHOD 552.2

EPA Science Inventory

The work presented in this paper entails the development of a method for haloacetic acid (HAA) analysis, Environmental Protection Agency (EPA)method 552.2, that improves the saftey and efficiency of previous methods and incorporates three additional trihalogenated acetic acids: b...

Marking and Moderation in the UK: False Assumptions and Wasted Resources

ERIC Educational Resources Information Center

Bloxham, Sue

2009-01-01

This article challenges a number of assumptions underlying marking of student work in British universities. It argues that, in developing rigorous moderation procedures, we have created a huge burden for markers which adds little to accuracy and reliability but creates additional work for staff, constrains assessment choices and slows down…

Mentorship Efforts to Support Part-Time Social Work Faculty Members

ERIC Educational Resources Information Center

Shobe, Marcia A.; Murphy-Erby, Yvette; Sparks, Jared

2014-01-01

Social work faculty experience increasing demands to develop and maintain a research portfolio that includes external funding and publications. Given the increase in research expectations, more part-time instructors are needed to teach courses. In addition to the literature review, we briefly describe a pilot part-time faculty mentorship project…

Developments with the Commission's Longitudinal Student Data System. Working Paper WP/06-07

ERIC Educational Resources Information Center

California Postsecondary Education Commission, 2006

2006-01-01

This paper summarizes the many uses of the California Postsecondary Education Commission's data system and describes work in progress on adding additional data elements. It describes how the Commission is using its Longitudinal Student Data System (LSDS) to examine the movement of students through California's public colleges and universities. The…

Evaluation Development and Use in Social Work Practice

ERIC Educational Resources Information Center

Gervin, Derrick W.; Davis, Sarita K.; Jones, Jenny L.; Counts-Spriggs, Margaret S. E.; Farris, Kimberly D.

2010-01-01

Background: Social workers entering the profession typically receive little, if any, content or training on evaluation practice. This is, in part, due to limited course offerings outside of the typical courses in most schools of social work. In addition, practicing social workers who often serve in the role as field instructors have not fully…

Burnout in medical residents: a questionnaire and interview study.

PubMed

Ringrose, Rik; Houterman, Saskia; Koops, Willem; Oei, Guid

2009-08-01

High burnout levels have been observed in medical residents. The purpose of this study is to assess the burnout rates and potential determinants of burnout in a sample of medical residents. In total, 58 medical residents working in a Dutch teaching hospital, received questionnaires at home, including the Maslach Burnout Inventory (MBI). In addition, they were asked for an in-depth interview to investigate the relevant indicators for developing burnout. In total, 47 residents responded (81%) from which 15 (31%) met the MBI criteria for burnout. Work-family conflict, work-related autonomy and level of work-engagement were significantly associated with burnout. Ten respondents were interviewed; none of those reported any serious burnout symptoms but two met the criteria for burnout. In this study, burnout rates from questionnaires and interviews in medical residents are not consistent. Regular burnout screenings and performing interviews are recommended in addition to burnout questionnaires, in order to efficiently identify residents at risk for burnout. This allows improved monitoring of a resident's mental state thus facilitating prevention of escalating burnout symptoms. Future research could focus on preventive factors for developing burnout.

Work time, work interference with family, and psychological distress.

PubMed

Major, Virginia Smith; Klein, Katherine J; Ehrhart, Mark G

2002-06-01

Despite public concern about time pressures experienced by working parents, few scholars have explicitly examined the effects of work time on work-family conflict. The authors developed and tested a model of the predictors of work time and the relationships between time, work interference with family (WIF). and psychological distress. Survey data came from 513 employees in a Fortune 500 company. As predicted, several work and family characteristics were significantly related to work time. In addition, work time was significantly, positively related to WIF, which in turn was significantly, negatively related to distress. The results suggest that work time fully or partially mediates the effects of many work and family characteristics on WIF.

The Road to Realizing In-Space Manufacturing

NASA Technical Reports Server (NTRS)

Clinton, Raymond G.

2014-01-01

Additive Manufacturing in space offers tremendous potential for dramatic paradigm shift in the development and manufacturing of space architectures. Additive Manufacturing in space offers the potential for mission safety risk reduction for low Earth orbit and deep space exploration; new paradigms for maintenance, repair, and logistics. Leverage ground-based technology developments, process characterization, and material properties databases. Investments are required primarily in the microgravity environment. We must do the foundational work. It's not sexy, but it is required.

Materials, Structures and Manufacturing: An Integrated Approach to Develop Expandable Structures

NASA Technical Reports Server (NTRS)

Belvin, W. Keith; Zander, Martin E.; Sleight, Daid W.; Connell, John; Holloway, Nancy; Palmieri, Frank

2012-01-01

Membrane dominated space structures are lightweight and package efficiently for launch; however, they must be expanded (deployed) in-orbit to achieve the desired geometry. These expandable structural systems include solar sails, solar power arrays, antennas, and numerous other large aperture devices that are used to collect, reflect and/or transmit electromagnetic radiation. In this work, an integrated approach to development of thin-film damage tolerant membranes is explored using advanced manufacturing. Bio-inspired hierarchical structures were printed on films using additive manufacturing to achieve improved tear resistance and to facilitate membrane deployment. High precision, robust expandable structures can be realized using materials that are both space durable and processable using additive manufacturing. Test results show this initial work produced higher tear resistance than neat film of equivalent mass. Future research and development opportunities for expandable structural systems designed using an integrated approach to structural design, manufacturing, and materials selection are discussed.

Implications of Leader-Member Exchange Theory and Research for Human Resource Development Research.

ERIC Educational Resources Information Center

Burns, Janet Z.; Otte, Fred L.

1999-01-01

Leader/member exchange theory is proposed as an alternate approach to the study of organizational leadership. Recent research supports the theory but additional development work is needed. The theory seeks to explain how leader/member relationships develop and the behavioral components of leadership relations. Contains 74 references. (Author/JOW)

Implications of AM for the Navy Supply Chain

DTIC Science & Technology

2016-12-01

Cornell University and Queens University of Canada. He is the co-chair of the America Makes Working Group for Additive Manufacturing Qualification and...strategic deployment of additive manufacturing (AM) ma- chines throughout the supply chain, coupled with the right business model, is an imperative need in...60 Table 1. Additive Manufacturing Business Model Factors to develop a standard BCA template, taking into consideration the parameters in Table 1

Tough, High-Performance, Thermoplastic Addition Polymers

NASA Technical Reports Server (NTRS)

Pater, Ruth H.; Proctor, K. Mason; Gleason, John; Morgan, Cassandra; Partos, Richard

1991-01-01

Series of addition-type thermoplastics (ATT's) exhibit useful properties. Because of their addition curing and linear structure, ATT polymers have toughness, like thermoplastics, and easily processed, like thermosets. Work undertaken to develop chemical reaction forming stable aromatic rings in backbone of ATT polymer, combining high-temperature performance and thermo-oxidative stability with toughness and easy processibility, and minimizing or eliminating necessity for tradeoffs among properties often observed in conventional polymer syntheses.

Pellet to Part Manufacturing System for CNCs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roschli, Alex C.; Love, Lonnie J.; Post, Brian K.

Oak Ridge National Laboratory’s Manufacturing Demonstration Facility worked with Hybrid Manufacturing Technologies to develop a compact prototype composite additive manufacturing head that can effectively extrude injection molding pellets. The head interfaces with conventional CNC machine tools enabling rapid conversion of conventional machine tools to additive manufacturing tools. The intent was to enable wider adoption of Big Area Additive Manufacturing (BAAM) technology and combine BAAM technology with conventional machining systems.

Women in rural development.

PubMed

Palmer, I

1980-01-01

The integration of women in rural development means something more than mere labor involvement, but there has never been a clear definition of what it means. 4 principal concerns of policy-makers are briefly described as they affect women: unemployment and inadequate employment; 2) the satisfaction of basic needs and women's participation in decision-making; 3) population issues; and 4) rural-to-urban migration. The actual inter-household and inter-personal distribution of more work and higher productivity work could result in some hard-working people working even longer hours because of additional tasks with others losing their intermittent employment opportunities due to mechanization. These contradictions can be particularly acute for women. The non-material basic need of decision-making powers is more important in the case of women than of men, yet the personal status of women is being threatened by the institution-building that accompanies peasant-based agricultural intensification plans and anti-poverty programs. The education of females has been seen as a possible factor favoring family planning. In addition, education for women can mean access to public information and new expectations from life for themselves. At this time more women than men seem to be migrating to towns and cities in a number of countries with varied economic structures. 3 cases studies of agricultural development in Kenya, Bangladesh and Java, Indonesia are presented.

Updated Perspectives on Educational Diagnosticians' Understanding of Reading Assessments

ERIC Educational Resources Information Center

Rueter, Jessica A.; McWhorter, Rochell R.; Lamb, John H.; Dykes, Frank O.

2016-01-01

Chappell, Stephens, Kinnison, and Pettigrew (2009) conducted a study investigating educational diagnosticians knowledge of early reading development. Our study replicated the work of Chappell et al. through a mixed methods design that investigated educational diagnosticians' perceptions and knowledge of early reading development. Additionally, our…

Vocational Counselors in France: Comparison to Competencies of Employment Specialists Working in Canadian IPS Programs.

PubMed

de Pierrefeu, Inès; Corbière, Marc; Pachoud, Bernard

2017-10-01

Supported employment programs are evidence-based practices to help people with severe mental illness to obtain competitive employment. The competencies of employment specialists working in these programs are key elements related to work integration. In France, the Messidor Association, a prevocational organisation, has developed a practice with similarities to supported employment and is beginning to develop supported employment programs in their context. The objective of this quantitative study was to evaluate the Messidor vocational counselors' competencies using the Behaviors, Attitudes and Knowledge in Employment Specialists' scale by comparing their results to those of employment specialists working in IPS programs in Canada. Descriptive analyses and a MANOVA highlighted similarities between French and Canadian counselors such as the same importance given to the working alliance with clients and the development of relationships with different stakeholders (e.g., employers). Skills that should be developed in vocational counselors in France include those related to rapid job search and dealing with stigma. In addition, clinical implications are suggested to ensure the development of vocational counselors' competencies in France.

Working in disadvantaged communities: What additional competencies do we need?

PubMed Central

Harris, Elizabeth; Harris, Mark F; Madden, Lynne; Wise, Marilyn; Sainsbury, Peter; MacDonald, John; Gill, Betty

2009-01-01

Background Residents of socioeconomically disadvantaged locations are more likely to have poor health than residents of socioeconomically advantaged locations and this has been comprehensively mapped in Australian cities. These inequalities present a challenge for the public health workers based in or responsible for improving the health of people living in disadvantaged localities. The purpose of this study was to develop a generic workforce needs assessment tool and to use it to identify the competencies needed by the public health workforce to work effectively in disadvantaged communities. Methods A two-step mixed method process was used to identify the workforce needs. In step 1 a generic workforce needs assessment tool was developed and applied in three NSW Area Health Services using focus groups, key stakeholder interviews and a staff survey. In step 2 the findings of this needs assessment process were mapped against the existing National Health Training Package (HLT07) competencies, gaps were identified, additional competencies described and modules of training developed to fill identified gaps. Results There was a high level of agreement among the AHS staff on the nature of the problems to be addressed but less confidence indentifying the work to be done. Processes for needs assessments, community consultations and adapting mainstream programs to local needs were frequently mentioned as points of intervention. Recruiting and retaining experienced staff to work in these communities and ensuring their safety were major concerns. Workforce skill development needs were seen in two ways: higher order planning/epidemiological skills and more effective working relationships with communities and other sectors. Organisational barriers to effective practice were high levels of annual compulsory training, balancing state and national priorities with local needs and giving equal attention to the population groups that are easy to reach and to those that are difficult to engage. A number of additional competency areas were identified and three training modules developed. Conclusion The generic workforce needs assessment tool was easy to use and interpret. It appears that the public health workforce involved in this study has a high level of understanding of the relationship between the social determinants and health. However there is a skill gap in identifying and undertaking effective intervention. PMID:19393091

Auction development for the price-based electric power industry

NASA Astrophysics Data System (ADS)

Dekrajangpetch, Somgiat

The restructuring of the electric power industry is to move away from the cost-based monopolistic environment of the past to the priced-based competitive environment. As the electric power industry is restructuring in many places, there are still many problems that need to be solved. The work in this dissertation contributes to solve some of the electric power auction problems. The majority of this work is aimed to help develop good markets. A LaGrangian relaxation (LR) Centralized Daily Commitment Auction (CDCA) has been implemented. It has been shown that the solution might not be optimal nor fair to some generation companies (GENCOs) when identical or similar generating units participate in a LR CDCA based auction. Supporting information for bidding strategies on how to change unit data to enhance the chances of bid acceptance has been developed. The majority of this work is based on Single Period Commodity Auction (SPCA). Alternative structures for the SPCA are outlined. Whether the optimal solution is degenerated is investigated. Good pricing criteria are summarized and the pricing method following good pricing criteria is developed. Electricity is generally considered as a homogeneous product. When availability level is used as additional characteristic to distinct electricity, electricity can be considered a heterogeneous product. The procedure to trade electricity as a heterogeneous product is developed. The SPCA is formulated as a linear program. The basic IPLP algorithm has been extended so that sensitivity analysis can be performed as in the simplex method. Sensitivity analysis is used to determine market reach. Additionally, sensitivity analysis is used in combination with the investigation of historical auction results to provide raw data for power system expansion. Market power is a critical issue in electric power deregulation. Firms with market power have an advantage over other competitor firms in terms of market reach. Various approaches to determine market power and market reach are to be investigated. How firms can acquire additional customers or additional transactions, given the auction results, is to be investigated. Additionally, how firms can utilize their market power to enhance their chances of success is to be investigated.

Swarming Robot Design, Construction and Software Implementation

NASA Technical Reports Server (NTRS)

Stolleis, Karl A.

2014-01-01

In this paper is presented an overview of the hardware design, construction overview, software design and software implementation for a small, low-cost robot to be used for swarming robot development. In addition to the work done on the robot, a full simulation of the robotic system was developed using Robot Operating System (ROS) and its associated simulation. The eventual use of the robots will be exploration of evolving behaviors via genetic algorithms and builds on the work done at the University of New Mexico Biological Computation Lab.

Work, obesity, and occupational safety and health.

PubMed

Schulte, Paul A; Wagner, Gregory R; Ostry, Aleck; Blanciforti, Laura A; Cutlip, Robert G; Krajnak, Kristine M; Luster, Michael; Munson, Albert E; O'Callaghan, James P; Parks, Christine G; Simeonova, Petia P; Miller, Diane B

2007-03-01

There is increasing evidence that obesity and overweight may be related, in part, to adverse work conditions. In particular, the risk of obesity may increase in high-demand, low-control work environments, and for those who work long hours. In addition, obesity may modify the risk for vibration-induced injury and certain occupational musculoskeletal disorders. We hypothesized that obesity may also be a co-risk factor for the development of occupational asthma and cardiovascular disease that and it may modify the worker's response to occupational stress, immune response to chemical exposures, and risk of disease from occupational neurotoxins. We developed 5 conceptual models of the interrelationship of work, obesity, and occupational safety and health and highlighted the ethical, legal, and social issues related to fuller consideration of obesity's role in occupational health and safety.

Why older workers work beyond the retirement age: a qualitative study.

PubMed

Sewdas, Ranu; de Wind, Astrid; van der Zwaan, Lennart G L; van der Borg, Wieke E; Steenbeek, Romy; van der Beek, Allard J; Boot, Cécile R L

2017-08-22

The aims of the present study were to: 1) gain insight into reasons for working beyond the statutory retirement age from older workers' perspectives, and 2) explore how the domains of the research framework Study on Transitions in Employment, Ability and Motivation (STREAM) can be applied to working beyond retirement age. A qualitative research design included individual interviews (n = 15) and three focus groups (n = 18 participants) conducted with older workers aged 65 years and older continuing in a paid job or self-employment. Interview participants were recruited from an existing STREAM cohort study. Focus group participants were recruited from companies and employment agencies. The data were subjected to thematic analysis. The most important motives for working beyond retirement age were maintaining daily routines and financial benefit. Good health and flexible work arrangements were mentioned as important preconditions. The themes emerging from the categorization of the motives and preconditions corresponded to the domains of health, work characteristics, skills and knowledge, and social and financial factors from the STREAM research framework. However, our analysis revealed one additional theme-purpose in life. This study offers important new insights into the various preconditions and motives that influence working beyond retirement age. In addition, the five domains of the STREAM research framework, including the additional domain of 'purpose in life', seem to be applicable to working beyond retirement age. This knowledge contributes to the development of work-related interventions that enhance older workers' motivation to prolong their working lives.

Training Personnel for Special Needs

ERIC Educational Resources Information Center

Tomlinson, Robert M.; Fabac, John N.

1978-01-01

Attempting to develop a framework for personnel development programs which train personnel to work with individuals who have special needs, this article discusses the inadequacies of traditional grouping patterns in education, then identifies those special skills needed by school personnel in addition to the skills taught in traditional teacher…

Managing Diversity: A Key to Building a Quality Work Force. Research and Development Series No. 271.

ERIC Educational Resources Information Center

Maxson, Judith; Hair, Billy

Economic changes create stress as U.S. businesses progress toward building a high quality work force for the year 2000. Skills such as critical literacy, communication, writing, math, and interpersonal competence are desired. Critical literacy involves the higher order thinking skills: the ability to analyze, evaluate, and synthesize. In addition,…

School-to-Work Transition in Arizona: Does Public Policy Ignore Social Equality for Rural Populations?

ERIC Educational Resources Information Center

Danzig, Arnold; Vandegrift, Judith A.

1995-01-01

Public policy implications for Arizona of the School-to-Work Opportunities Act are explored, specifically with regard to rural areas. It is argued that should additional resources become available to the state, population-based allocations to rural areas are likely to be insufficient for meaningful educational and economic-development reform. (SLD)

Academic & Technical Skills + Life/Work Skills + Career Information & Guidance = Success in Career Building.

ERIC Educational Resources Information Center

Jarvis, Phillip S.

There has been a renaissance in the thinking about career development. It is becoming accepted that information is not enough; in addition to academic and technical skills, youth and adults need to learn life/work designing and building skills to become healthy, productive, and self-reliant citizens. Despite the fact that Canadian students have…

Work-Family Enrichment and Conflict: Additive Effects, Buffering, or Balance?

ERIC Educational Resources Information Center

Gareis, Karen C.; Barnett, Rosalind Chait; Ertel, Karen A.; Berkman, Lisa F.

2009-01-01

We used data from the Midlife Development in the United States (MIDUS I) (N = 2,031) to compare three models of how work-family conflict and enrichment might operate to predict well-being (mental health, life satisfaction, affect balance, partner relationship quality). We found no support for a relative-difference model in which the…

Developing Cross-Cultural Competence: A Guide for Working with Children and Their Families, Third Edition

ERIC Educational Resources Information Center

Lynch, Eleanor W.; Hanson, Marci J.

2004-01-01

The third edition of this bestselling text brings together detailed, accurate information on working with families and children with disabilities from specific cultural, ethnic, and language groups. Filled with timely new additions such as a chapter on South Asian roots, open-ended case studies on ethical dilemmas, and an expanded discussion on…

Using computer software to improve group decision-making.

PubMed

Mockler, R J; Dologite, D G

1991-08-01

This article provides a review of some of the work done in the area of knowledge-based systems for strategic planning. Since 1985, with the founding of the Center for Knowledge-based Systems for Business Management, the project has focused on developing knowledge-based systems (KBS) based on these models. In addition, the project also involves developing a variety of computer and non-computer methods and techniques for assisting both technical and non-technical managers and individuals to do decision modelling and KBS development. This paper presents a summary of one segment of the project: a description of integrative groupware useful in strategic planning. The work described here is part of an ongoing research project. As part of this project, for example, over 200 non-technical and technical business managers, most of them working full-time during the project, developed over 160 KBS prototype systems in conjunction with MBA course in strategic planning and management decision making. Based on replies to a survey of this test group, 28 per cent of the survey respondents reported their KBS were used at work, 21 per cent reportedly received promotions, pay rises or new jobs based on their KBS development work, and 12 per cent reported their work led to participation in other KBS development projects at work. All but two of the survey respondents reported that their work on the KBS development project led to a substantial increase in their job knowledge or performance.

A non-additive repulsive contribution in an equation of state: The development for homonuclear square well chains equation of state validated against Monte Carlo simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trinh, Thi-Kim-Hoang; Laboratoire de Science des Procédés et des Matériaux; Passarello, Jean-Philippe, E-mail: Jean-Philippe.Passarello@lspm.cnrs.fr

This work consists of the adaptation of a non-additive hard sphere theory inspired by Malakhov and Volkov [Polym. Sci., Ser. A 49(6), 745–756 (2007)] to a square-well chain. Using the thermodynamic perturbation theory, an additional term is proposed that describes the effect of perturbing the chain of square well spheres by a non-additive parameter. In order to validate this development, NPT Monte Carlo simulations of thermodynamic and structural properties of the non-additive square well for a pure chain and a binary mixture of chains are performed. Good agreements are observed between the compressibility factors originating from the theory and thosemore » from molecular simulations.« less

Reconceptualising "Identity Slippage": Additional Language Learning and (L2) Identity Development

ERIC Educational Resources Information Center

Armour, William

2009-01-01

This paper reconsiders the theoretical concept of "identity slippage" by considering a detailed exegesis of three model conversations taught to learners of Japanese as an additional language. To inform my analysis of these conversations and how they contribute to identity slippage, I have used the work of the systemic-functional linguist Jay Lemke…

Designing Location-Based Learning Experiences for People with Intellectual Disabilities and Additional Sensory Impairments

ERIC Educational Resources Information Center

Brown, David J.; McHugh, David; Standen, Penny; Evett, Lindsay; Shopland, Nick; Battersby, Steven

2011-01-01

The research reported here is part of a larger project which seeks to combine serious games (or games-based learning) with location-based services to help people with intellectual disabilities and additional sensory impairments to develop work based skills. Specifically this paper reports on where these approaches are combined to scaffold the…

Parenting in the '80s. . . Student Guide. Brookhaven College Child Development Program.

ERIC Educational Resources Information Center

Linn, Hilda; And Others

This guide was developed to accompany a series of 16 seminars on parenting offered by the Brookhaven College Child Development Program to help meet the concerns and needs of working parents in a time of changing lifestyles and family patterns. In addition to providing an overview of each seminar topic, the guide contains informational essays…

Assessment of Existing Data and Reports for System Evaluation

NASA Technical Reports Server (NTRS)

Matolak, David W.; Skidmore, Trent A.

2000-01-01

This report describes work done as part of the Weather Datalink Research project grant. We describe the work done under Task 1 of this project: the assessment of the suitability of available reports and data for use in evaluation of candidate weather datalink systems, and the development of a performance parameter set for comparative system evaluation. It was found that existing data and reports are inadequate for a complete physical layer characterization, but that these reports provide a good foundation for system comparison. In addition, these reports also contain some information useful for evaluation at higher layers. The performance parameter list compiled can be viewed as near complete-additional investigations, both analytical/simulation and experimental, will likely result in additions and improvements to this list.

Freeform Fluidics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Love, Lonnie J; Richardson, Bradley S; Lind, Randall F

This work explores the integration of miniaturized fluid power and additive manufacturing. Oak Ridge National Laboratory (ORNL) has been developing an approach to miniaturized fluidic actuation and control that enables high dexterity, low cost and a pathway towards energy efficiency. Previous work focused on mesoscale digital control valves (high pressure, low flow) and the integration of actuation and fluid passages directly with the structure. The primary application being fluid powered robotics. The fundamental challenge was part complexity. Additive manufacturing technologies (E-Beam, Laser and Ultrasonic deposition) enable freeform manufacturing using conventional metal alloys with excellent mechanical properties. The combination of thesemore » two technologies (miniaturized fluid power and additive manufacturing) can enable a paradigm shift in fluid power, increasing efficiency while simultaneously reducing weight, size, complexity and cost.« less

[Development and Evaluation of the Work-Related Intervention "Perspective Job" for the Oncological Rehabilitation].

PubMed

Kähnert, H; Exner, A-K; Brand, S; Leibbrand, B

2016-06-01

The knowledge about contents and arrangement of work-related measures in oncological rehabilitation is limited. The aim of the study was to develop a multimodal work-related module called Perspective Job for the oncological rehabilitation as well as to evaluate the process of development and the module itself. Perspective Job was developed within a rehabilitation team. For an examination of the process of development and of the module expert interviews with clinic employees and group interviews with patients were conducted. Group interviews were conducted before as well as after the implementation of Perspective Job to demonstrate changes in the rehabilitation from the patients point of view. Participants were oncological patients with substantial work-related problems. The module Perspective Job consists of work-related therapies as well as job trainings. The expert interviews illustrates: The process of development is valued as positive and meaningful by the rehabilitation team. Furthermore synergetic effects were used and the exchange of information and the communication within the team were promoted. The interviews with the patient emphasized that most perspective job therapies were classified as work-related and that an individual occupation-oriented care took place. The promoting exchanges of experience between the participants has been positively evaluated. In addition, they seemed to be well-prepared for the return to work. The development of a work-related module in the rehabilitation team is possible. The process was valued by the team members positively and promoted the multiprofessional cooperation. An occupationally oriented arrangement of the rehabilitation was solely perceived by the participants of Perspective Job, which felt better prepared to reintegrate into working life. The results emphasize the importance of teamwork for the development and implementation of work-related therapy modules for the oncological rehabilitation. © Georg Thieme Verlag KG Stuttgart · New York.

Grizzly Staus Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Benjamin; Zhang, Yongfeng; Chakraborty, Pritam

2014-09-01

This report summarizes work during FY 2014 to develop capabilities to predict embrittlement of reactor pressure vessel steel, and to assess the response of embrittled reactor pressure vessels to postulated accident conditions. This work has been conducted a three length scales. At the engineering scale, 3D fracture mechanics capabilities have been developed to calculate stress intensities and fracture toughnesses, to perform a deterministic assessment of whether a crack would propagate at the location of an existing flaw. This capability has been demonstrated on several types of flaws in a generic reactor pressure vessel model. Models have been developed at themore » scale of fracture specimens to develop a capability to determine how irradiation affects the fracture toughness of material. Verification work has been performed on a previously-developed model to determine the sensitivity of the model to specimen geometry and size effects. The effects of irradiation on the parameters of this model has been investigated. At lower length scales, work has continued in an ongoing to understand how irradiation and thermal aging affect the microstructure and mechanical properties of reactor pressure vessel steel. Previously-developed atomistic kinetic monte carlo models have been further developed and benchmarked against experimental data. Initial work has been performed to develop models of nucleation in a phase field model. Additional modeling work has also been performed to improve the fundamental understanding of the formation mechanisms and stability of matrix defects caused.« less

Maternal employment, work schedules, and children's body mass index.

PubMed

Morrissey, Taryn W; Dunifon, Rachel E; Kalil, Ariel

2011-01-01

Previous work has shown that mothers' employment is associated with increases in children's body mass index (BMI), a measure of weight for height. Nonstandard work (working evenings or nights, weekends, or an irregular shift) may also be associated with children's BMI. This article examines the association between maternal work and children's BMI and considers the influence of mothers' nonstandard work schedules. Using data from school-age children (approximately 8 to 12 years) in the NICHD's Study of Early Child Care and Youth Development (N = 990), this study found that an increase in the total time a mother is employed is associated with an increase in her child's BMI; additionally, the association between maternal employment and children's weight is much stronger at 6th grade relative to younger ages. There was no evidence that maternal or home characteristics or children's time use mediated these associations, nor was there any evidence that nonstandard work was associated with children's BMI. Implications for policy and future research are discussed. © 2011 The Authors. Child Development © 2011 Society for Research in Child Development, Inc.

[Computers in nursing: development of free software application with care and management].

PubMed

dos Santos, Sérgio Ribeiro

2010-06-01

This study aimed at developing an information system in nursing with the implementation of nursing care and management of the service. The SisEnf--Information System in Nursing--is a free software module that comprises the care of nursing: history, clinical examination and care plan; the management module consists of: service shifts, personnel management, hospital indicators and other elements. The system was implemented at the Medical Clinic of the Lauro Wanderley University Hospital, at Universidade Federal da Paraiba. In view of the need to bring user and developer closer, in addition to the constant change of functional requirements during the interactive process, the method of unified process was used. The SisEnf was developed on a WEB platform and using free software. Hence, the work developed aimed at assisting in the working process of nursing, which will now have the opportunity to incorporate information technology in their work routine.

Final Report - IHLW PCT, Spinel T1%, Electrical Conductivity, and Viscosity Model Development, VSL-07R1240-4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Piepel, Gregory F.; Landmesser, S. M.

2013-11-13

This report is the last in a series of currently scheduled reports that presents the results from the High Level Waste (HLW) glass formulation development and testing work performed at the Vitreous State Laboratory (VSL) of the Catholic University of America (CUA) and the development of IHLW property-composition models performed jointly by Pacific Northwest National Laboratory (PNNL) and VSL for the River Protection Project-Waste Treatment and Immobilization Plant (RPP-WTP). Specifically, this report presents results of glass testing at VSL and model development at PNNL for Product Consistency Test (PCT), one-percent crystal fraction temperature (T1%), electrical conductivity (EC), and viscosity ofmore » HLW glasses. The models presented in this report may be augmented and additional validation work performed during any future immobilized HLW (IHLW) model development work. Completion of the test objectives is addressed.« less

EMAP - WEST COMMUNICATIONS, INDICES OF BIOTIC INTEGRITY

EPA Science Inventory

One of the key elements of EMAP-West is to develop biological indicators of condition of the streams and rivers of the West. The development and use of Indicators of Biological Integrity (IBI) are described for the 12 western State in EMAP-West. A key addition to the early work...

Career Development of Single Parents. Information Series No. 324.

ERIC Educational Resources Information Center

Burge, Penny L.

The number of single-parent families has increased dramatically. These families are subject to extreme economic problems and thus are in special need of career development and vocational preparation. Displaced homemakers are at a disadvantage inasmuch as they must reenter the work force; moreover, they face the additional career development…

Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

ERIC Educational Resources Information Center

Russell, Daniel M.; Pirolli, Peter

Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

IMPROVED VALUATION OF ECOLOGICAL BENEFITS ASSOCIATED WITH AQUATIC LIVING RESOURCES: DEVELOPMENT AND TESTING OF INDICATOR-BASED STATED PREFERENCE VALUATION AND TRANSFER

EPA Science Inventory

In addition to development and systematic qualitative/quantitative testing of indicator-based valuation for aquatic living resources, the proposed work will improve interdisciplinary mechanisms to model and communicate aquatic ecosystem change within SP valuation—an area...

Analysis of Performance of Selected AFC, ATF Fuels, and Lanthanide Transport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unal, Cetin; Galloway, Jack D.

2015-09-29

We started to look at the performance of ATF concept in LWRs late in FY14 and finish our studies in FY15. The work has been presented in AFC review meetings, ICAPP and TOPFUEL conferences. The final version of the work is accepted for publication in Nuclear Engineering and Science Journal (NES). The copy of ICAPP and NES papers are attached separately to this document as our milestone deliverables. We made an important progress in the modeling of lanthanide transport in FY15. This work produced an ANS Winter Meeting paper and GLOBAL 2015 paper. GLOBAL 2015 paper is also attached asmore » deliverable of FY15. The work on the lanthanide transport is preliminary. We are exploring other potential mechanisms, in addition to “liquid-like” diffusion mechanisms, proposed by Robert Mariani [1] before we analyze data that will be taken by Ohio State University. This year, we concentrate on developing diffusion kernels and principles of modeling. Next year, this work will continue and analyze the Ohio State data and develop approaches to solve multicomponent diffusion. In addition to three papers we attached to this report, we have done some research on coupling and the development of gas release model for metallic fuels in FY15. They are also preliminary in nature; therefore, we give the summary of what we found rather than an extended report that will be done in FY16.« less

Air Force: Actions Needed to Strengthen Management of Unmanned Aerial System Pilots

DTIC Science & Technology

2014-04-01

demands on RPA pilots limit the time they have available for training and development and negatively affects their work - life balance . In addition, the... balance . To understand the working conditions of RPA pilots that may affect their quality of life , we analyzed Air Force studies that evaluated the...servicemember needs. DOD has broadly defined quality of life to include such factors as morale, health and wellness, and work - life balance . To understand these

Military Personnel: DOD Should Develop a Plan to Evaluate the Effectiveness of Its Career Intermission Pilot Program

DTIC Science & Technology

2015-10-01

allowed them to address work - life balance challenges, such as managing deployment schedules and caring for family, that could not be achieved using...Career Intermissions In addition, officials stated that a career sabbatical may help to address the work - life balance that cannot be...suitable option for work / life balance that helps offset goals/issues that cannot be addressed while on active duty and gives sailors an option besides

Development and initial evaluation of an enhanced measure of boundary flexibility for the work and family domains.

PubMed

Matthews, Russell A; Barnes-Farrell, Janet L

2010-07-01

This manuscript reports the development of a measure of work and family domain boundary flexibility. Building on previous research, we propose an expanded definition of boundary flexibility that includes two components-flexibility-ability and flexibility-willingness-and we develop a measure designed to capture this more comprehensive definition of boundary flexibility. Flexibility-ability is conceptualized as an individual's perception of personal and situational constraints that affect boundary management, and flexibility-willingness is conceptualized as an individual difference variable that captures the motivation to engage in boundary flexing. An additional feature of domain boundaries, permeability, is also examined. Data are presented from two studies. Study 1 (N = 244) describes the development of a multiscale measure that extends current conceptual definitions of boundary flexibility. Study 2 (N = 225) describes the refinement and evaluation of this measure. Confirmatory factor analysis, reliability evidence, interscale correlations, and correlations with important work-family constructs (e.g., domain centrality, work-family conflict) provide initial construct validity evidence for the measure.

Combining Drama Pedagogy with Digital Technologies to Support the Language Learning Needs of Newly Arrived Refugee Children: A Classroom Case Study

ERIC Educational Resources Information Center

Dunn, Julie; Bundy, Penny; Woodrow, Nina

2012-01-01

Although significant research has been completed that examines the effectiveness of process drama as a pedagogical approach for developing additional languages and further work has focused on the affordances of digital technologies within drama work, scant attention has been paid to the possibilities which a combination of these approaches might…

A Study of Attitudes Associated with Retraining. Part I. Work Resource and Retraining Initiative.

ERIC Educational Resources Information Center

Miskovic, Darlene

A study was conducted to develop an understanding of retraining from the perspective of those who have experienced it--to know more about how and why they decided to undertake the process of acquiring new or additional work skills, how they learned about the alternatives available to them, and what feelings accompanied this experience. Research…

American Rocket Society

NASA Technical Reports Server (NTRS)

2004-01-01

In addition to Dr. Robert Goddard's pioneering work, American experimentation in rocketry prior to World War II grew, primarily in technical societies. This is an early rocket motor designed and developed by the American Rocket Society in 1932.

Early Rockets

NASA Image and Video Library

2004-04-15

In addition to Dr. Robert Goddard's pioneering work, American experimentation in rocketry prior to World War II grew, primarily in technical societies. This is an early rocket motor designed and developed by the American Rocket Society in 1932.

1400323

NASA Image and Video Library

2014-05-02

DALE THOMAS, LEFT, MARSHALL AA FOR TECHNICAL WORK AND JAMES LACKEY, RIGHT, ACTING DIRECTOR FOR AMRDEC SIGNED AN AGREEMENT ON MAY 2, 2014 TO ENGAGE IN RESEARCH & DEVELOPMENT EFFORTS THAT ADVANCE THE STATE OF THE ART IN ADDITIVE MANUFACTURING

Development of Synchronously Scanned OPO CARS as a New Probe for Hostile Environments

NASA Technical Reports Server (NTRS)

Chen, Peter C.

1998-01-01

During the second year of this project, we have focused on three new developments. The first has been the accidental discovery of a degenerate peak at the 0/cm position in the coherent Raman spectrum that is not due to incoherent Rayleigh scattering. The second is the incorporation of a second OPO to provide additional capability to the instrument. The third is the design of a new system that could perform single-shot CARS using a solid state broad-band OPO, The project continues to focus on student research training at the undergraduate level, and three students have worked on the project through this grant. The outcome of this work has been I publication published during this period, 2 publications submitted (by invitation), and 7 presentations given or invited, During this period, one additional grant was funded.

Diplomatic Solutions to Additive Challenges

DTIC Science & Technology

Additive manufacturing (AM) technology, colloquially known as 3D printing , will bring significant benefits to society, but also poses great risks...regimes, are not sufficient to address the challenges presented by 3D printing technology. The DOS should evaluate and promote unconventional strategies...from printed weapons proliferation. Working with other nations to resolve the appropriate balance between development and security, and to promote norms

Time delays, population, and economic development

NASA Astrophysics Data System (ADS)

Gori, Luca; Guerrini, Luca; Sodini, Mauro

2018-05-01

This research develops an augmented Solow model with population dynamics and time delays. The model produces either a single stationary state or multiple stationary states (able to characterise different development regimes). The existence of time delays may cause persistent fluctuations in both economic and demographic variables. In addition, the work identifies in a simple way the reasons why economics affects demographics and vice versa.

Career Development: A Course of Study Recommended for Ninth Grade.

ERIC Educational Resources Information Center

Lewis-Clark State Coll., Lewiston, ID.

The Career Development guide for teacher use in Grade 9 was developed and evaluated with the help of classroom teachers in Idaho in response to the need for additional emphasis on career awareness and exploration and for opportunities for career planning. It is intended as a basic core and focuses on both the personal and world of work aspects of…

Enantioselective separation of biologically active basic compounds in ultra-performance supercritical fluid chromatography.

PubMed

Geryk, Radim; Kalíková, Květa; Schmid, Martin G; Tesařová, Eva

2016-08-17

The enantioseparation of basic compounds represent a challenging task in modern SFC. Therefore this work is focused on development and optimization of fast SFC methods suitable for enantioseparation of 27 biologically active basic compounds of various structures. The influences of the co-solvent type as well as different mobile phase additives on retention, enantioselectivity and enantioresolution were investigated. Obtained results confirmed that the mobile phase additives, especially bases (or the mixture of base and acid), improve peak shape and enhance enantioresolution. The best results were achieved with isopropylamine or the mixture of isopropylamine and trifluoroacetic acid as additives. In addition, the effect of temperature and back pressure were evaluated to optimize the enantioseparation process. The immobilized amylose-based chiral stationary phase, i.e. tris(3,5-dimethylphenylcarbamate) derivative of amylose proved to be useful tool for the enantioseparation of a broad spectrum of chiral bases. The chromatographic conditions that yielded baseline enantioseparations of all tested compounds were discovered. The presented work can serve as a guide for simplifying the method development for enantioseparation of basic racemates in SFC. Copyright © 2016 Elsevier B.V. All rights reserved.

Social Security, retirement incentives, and retirement behavior: an international perspective.

PubMed

Gruber, J; Wise, D

1999-05-01

Escalating rates of early retirement are imposing fiscal pressure on retirement systems around the world. In some developed countries, the labor-force participation rates of men ages 60-64 have fallen by 75 percent over the last three decades. One explanation for this striking decline is social security program provisions which create disincentives to continued labor-force participation by older workers. There are substantial differences among developed nations in the labor-force participation of older workers. While two-thirds of 60-year-old American males are working, only one-quarter of men that age are working in Belgium. Over the entire 55-65 age range, 63 percent of American males are working, compared with only 40 percent of French males and 33 percent of Belgians males. There is strong evidence that the early retirement provisions of social security systems in developed countries determine the modal age of retirement. There is a strong relationship between early retirement ages and labor-force withdrawal rates; for example, in France, 60 percent of those working at the early entitlement age of 60 leave the labor force at that age. The core of this analysis is the construction of "implicit tax/subsidy rates" on additional work at older ages through each nation's social security system. These rates measure the change in a worker's retirement wealth entitlement from delaying retirement for one year, relative to the amount that would have been earned over that year. The U.S. Social Security system has an actuarial adjustment for delayed benefits claiming and other features that avoid financial incentives to leave the labor force at age 62 for a married worker, there is a slight disincentive to work for single workers and high wage earners. However, at ages 65 and older there is a stronger incentive to leave the labor force, with implicit tax rates on work of 19 percent for married workers and 33 percent for single workers. By comparison, other nations do not have actuarially fair adjustments, and as a result impose substantial taxes on additional work at older ages. In several countries, implicit tax rates on work at older ages approach or exceed 100 percent. This is because by delaying retirement, workers forgo benefits which often replace close to their full wage, in addition to having to pay the high payroll taxes required to finance generous social security benefits. There is a striking correlation across nations between high implicit tax rates on additional work and low labor-force participation rates among older workers. This suggests that social security program incentives are an important determinant of retirement. These findings have important policy implications for reforming social security programs in the United States and abroad. Policymakers must consider how program reforms will affect incentives for continued work at older ages.

Shift work at young age is associated with increased risk of multiple sclerosis in a Danish population.

PubMed

Gustavsen, S; Søndergaard, H B; Oturai, D B; Laursen, B; Laursen, J H; Magyari, M; Ullum, H; Larsen, M H; Sellebjerg, F; Oturai, A B

2016-09-01

Epidemiological studies suggest an important role for environmental factors in developing multiple sclerosis (MS). Furthermore several studies have indicated that the effect of environmental factors may be especially pronounced in adolescents. Recently only one study investigated and found that shift work at young age is associated with an increased risk of developing MS. In this study we focused on the effect of shift work in the vulnerable period between 15-19 years. The aim of this study was to investigate the association between shift work at young age and the risk of developing MS. We performed a large case-control study including 1723 patients diagnosed with MS and 4067 controls. MS patients were recruited from the Danish Multiple Sclerosis Biobank and controls from The Danish Blood Donor Study. Information on working patterns and lifestyle factors was obtained using a comprehensive lifestyle-environmental factor questionnaire with participants enrolled between 2009 and 2014. Logistic regression models were used to investigate the association between shift work at age 15-19 years and the subsequent risk of MS and were controlled for effects due to established MS risk factors. We found a statistically significant association when total numbers of night shifts were compared with non-shift workers. For every additional 100 night shifts the odds ratio (OR) for MS was 1.20 (95% confidence interval (CI), 1.08-1.34, p=0.001). Increasing intensity of shift work also increased MS risk. For every additional night per month the OR was 1.04 (95% CI, 1.01-1.06, p=0.002). Duration of shift work in years was not associated with risk of MS. This study supports a statistically significant association between shift work at age 15-19 years and MS risk. Copyright © 2016 Elsevier B.V. All rights reserved.

Influence of Applying Additional Forcing Fans for the Air Distribution in Ventilation Network

NASA Astrophysics Data System (ADS)

Szlązak, Nikodem; Obracaj, Dariusz; Korzec, Marek

2016-09-01

Mining progress in underground mines cause the ongoing movement of working areas. Consequently, it becomes necessary to adapt the ventilation network of a mine to direct airflow into newly-opened districts. For economic reasons, opening new fields is often achieved via underground workings. Length of primary intake and return routes increases and also increases the total resistance of a complex ventilation network. The development of a subsurface structure can make it necessary to change the air distribution in a ventilation network. Increasing airflow into newly-opened districts is necessary. In mines where extraction does not entail gas-related hazards, there is possibility of implementing a push-pull ventilation system in order to supplement airflows to newly developed mining fields. This is achieved by installing subsurface fan stations with forcing fans at the bottom of downcast shaft. In push-pull systems with multiple main fans, it is vital to select forcing fans with characteristic curves matching those of the existing exhaust fans to prevent undesirable mutual interaction. In complex ventilation networks it is necessary to calculate distribution of airflow (especially in networks with a large number of installed fans). In the article the influence of applying additional forcing fans for the air distribution in ventilation network for underground mine were considered. There are also analysed the extent of overpressure caused by the additional forcing fan in branches of the ventilation network (the operating range of additional forcing fan). Possibilities of increasing airflow rate in working areas were conducted.

Metallurgical Research Relating to the Development of Metals and Alloys for Use in the High-Temperature Components of Jet-Engines, Gas Turbines and Other Aircraft Propulsion Systems

NASA Technical Reports Server (NTRS)

1948-01-01

Considerable work has been done on report preparation. All items listed in the March program report will be reported during July. Fundamental studies are in progress to establish the fundamental processes by which treatments and composition control properties of commercial alloys at high temperatures. As yet work has been confined to Low-Carbon N155 alloy and progress has been reported twice previously. The work is divided into two sections: studies of solution treated and aged material and studies of rolled structures. Electron microscopic work has been started as an additional technique for the studies. Brief descriptions of experimental techniques used, results, and interpretation of the data obtained since the last report covering this field are summarized below. Since the work outlined is to a large extent still in progress, the discussion given is to be considered tentative and subject to further modification as additional data becomes available.

Ben Polly | NREL

Science.gov Websites

joined NREL in 2009. He specializes in the development, validation, and application of energy analysis approaches for individual buildings and collections of buildings. He has developed and applied software (e.g., building energy storage). In addition to his work at NREL, Ben serves on the Building

Linguistic Variability and Intellectual Development. Miami Linguistics Series No. 9.

ERIC Educational Resources Information Center

von Humboldt, Wilhelm

Although this edition of Wilhelm von Humboldt's "Linguistic Variability and Intellectual Development" is based entirely on the original German edition, the translators (George C. Buck and Frithjof A. Raven) and the publisher have attempted to clarify certain aspects of this work for the modern-day reader. These features include the addition of…

Developing Digital Information Literacy in Higher Education: Obstacles and Supports

ERIC Educational Resources Information Center

Jeffrey, Lynn; Hegarty, Bronwyn; Kelly, Oriel; Penman, Merrolee; Coburn, Dawn; McDonald, Jenny

2011-01-01

The development of digital information literacy (DIL) has been slow in comparison to changes in information communication technologies, and this remains an issue for the higher education sector. Competency in such skills is essential to full participation in society and work. In addition, these skills are regarded as underpinning the ability to…

Effect of kernel characteristics on color and flavor development during peanut roasting: two years of data

USDA-ARS?s Scientific Manuscript database

Experiments with Crop Year (CY) 2014 samples from the Uniform Peanut Performance Trials (UPPT) revealed that color and flavor profile development were related to kernel moisture content (MC) during dry roasting. That work was repeated with CY 2015 UPPT samples with additional replication. Raw MC, ...

Collaborative Research and Development (CR&D). Delivery Order 0031: Basic Research and Development of Ti-B Alloys

DTIC Science & Technology

2006-09-01

September 2005 Abstract The grain size of as-cast Ti- 6Al - 4V is reduced by about an order of magnitude from 1700 to 200 /lm with an addition of 0.1 wt...and enhances subsequent mechanical working response [l J. The grain sizes of conventional cast titanium alloys (e.g, Ti-6AI- 4V ) are rather coarse...microstructure; Serial sectioning 1. Introduction The addition of boron to titanium alloys such as Ti­ 6AI- 4V can significantly enhance their strength

Development and utilization of new diagnostics for dense-phase pneumatic transport. Quarterly technical progress report, October 1-December 31, 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Louge, M. Y.; Jenkins, J. T.

The main objective of this work is to develop probes for local measurements of solid velocity and holdup in dense gas-solid flows. In particular, capacitance probes are designed to measure local, time-dependent particle concentrations. In addition, a new optical fiber probe based on laser-induced-phosphorescence is developed to measure particle velocities. The principles for the capacitance and optical diagnostics were given in our first and second quarterly reports. In this reporting period, we have demonstrated with success the feasibility of the optical fiber probe. Another objective of this work is to develop a model of dense-phase conveying and to test thismore » model in a setup that incorporates our diagnostics. In this period, as a prelude to these modeling efforts scheduled for the third year of the contract, we have carried out additional computer simulations of rapid granular flows to verify the theories of Jenkins and Richman (1988) on the anisotropy of the second moment in simple shear. 2 refs., 5 figs.« less

Personality Trait Development and Social Investment in Work

PubMed Central

Hudson, Nathan W.; Roberts, Brent W.; Lodi-Smith, Jennifer

2012-01-01

A longitudinal study of employed individuals was used to test the relationship between social investment at work—the act of cognitively and emotionally committing to one’s job—and longitudinal and cross-sectional personality trait development. Participants provided ratings of personality traits and social investment at work at two time-points, separated by approximately three years. Data were analyzed using latent change models. Cross-sectional results showed that extraversion, agreeableness, conscientiousness and emotional stability were related to social investment at work. Additionally, a positive association was found between longitudinal change in social investment in work and change in personality traits—especially conscientiousness. Finally, the correlated changes in social investment and personality traits were invariant across age groups, suggesting that personality traits remain malleable across the lifespan. PMID:22822278

Overview of FAR-TECH's magnetic fusion energy research

NASA Astrophysics Data System (ADS)

Kim, Jin-Soo; Bogatu, I. N.; Galkin, S. A.; Spencer, J. Andrew; Svidzinski, V. A.; Zhao, L.

2017-10-01

FAR-TECH, Inc. has been working on magnetic fusion energy research over two-decades. During the years, we have developed unique approaches to help understanding the physics, and resolving issues in magnetic fusion energy. The specific areas of work have been in modeling RF waves in plasmas, MHD modeling and mode-identification, and nano-particle plasma jet and its application to disruption mitigation. Our research highlights in recent years will be presented with examples, specifically, developments of FullWave (Full Wave RF code), PMARS (Parallelized MARS code), and HEM (Hybrid ElectroMagnetic code). In addition, nano-particle plasma-jet (NPPJ) and its application for disruption mitigation will be presented. Work is supported by the U.S. DOE SBIR program.

77 FR 58863 - Notice of Meeting of the Pinedale Anticline Working Group

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

....gov . Persons who use a telecommunications device for the deaf (TDD), may call the Federal Information..., monitoring, and adaptive management issues as oil and gas development in the PAPA proceeds. Additional...

Using Simulation in Assessment and Teaching: OSCE Adapted for Social Work

ERIC Educational Resources Information Center

Bogo, Marion; Rawlings, Mary; Katz, Ellen; Logie, Carmen

2014-01-01

This detailed book by the most experienced authors in the field describes how to develop and implement the objective structured clinical examination (OSCE) for social work education. In addition to a wealth of practical material in the appendices, two videos produced especially for this book (accessible online) show the OSCE process step-by-step.…

Development of alternative oxygen production source using a zirconia solid electrolyte membrane

NASA Technical Reports Server (NTRS)

Suitor, J. W.; Clark, D. J.; Losey, R. W.

1990-01-01

The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation.

Low-Cost Nanocellulose-Reinforced High-Temperature Polymer Composites for Additive Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ozcan, Soydan; Tekinalp, Halil L.; Love, Lonnie J.

2016-07-13

ORNL worked with American Process Inc. to demonstrate the potential use of bio-based BioPlus ® lignin-coated cellulose nanofibrils (L-CNF) as a reinforcing agent in the development of polymer feedstock suitable for additive manufacturing. L-CNF-reinforced polylactic acid (PLA) testing coupons were prepared and up to 69% increase in tensile strength and 133% increase in elastic modulus were demonstrated.

Implementing virtual field trips in the curriculum of geography students

NASA Astrophysics Data System (ADS)

Steegen, An; Verstraeten, Gert; Martens, Lotte

2016-04-01

Current online geospatial databases and tools offer many opportunities in geoscience education. On the one hand a variety of geoscientific topics and regions can be studied without traditional fieldwork, and on the other hand, field-based learning activities can be prepared or post-processed. In this research, the use of Virtual Field Trips (VFTs) in Google EarthTM is studied. In the framework of geomorphology courses, undergraduate geography students were given VFTs as developed by the lecturers or had to develop VFTs themselves, after visiting a study area. Maps, photographs, GPS-tracks, literature and other spatial information were integrated in the VFTs. The effect of VFTs on learning outcomes, on the insight in the horizontal and vertical relationships between the spatially varying topics, and motivation were measured. Results confirm that students are positive about the use of VFTs. They indicate that VFTs significantly improve their mental map of the study area, whereby horizontal relationships were strengthened. Also the additional information in some VFTs proved to have positive effects on studying and structuring the learning content. Students also appreciated to work independently with the VFTs and saw possibilities for integrating various geoscientific topics. However, there are also some constraints in working with VFTs. It was clear from the study that VFTs have to be embedded in the curriculum as students do not use or develop VFTs spontaneously. Indeed, it takes a lot of time to develop a VFT, and students also appreciate a variety in work forms. Also some technical difficulties on sufficient wireless internet access and flexible work spaces have to be encountered. Besides this, curricula developers should be aware that VFTs are an interesting tool additionally to field trips, but that they cannot replace the field trips.

Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review

NASA Astrophysics Data System (ADS)

Kumbhar, N. N.; Mulay, A. V.

2016-08-01

The Additive Manufacturing (AM) processes open the possibility to go directly from Computer-Aided Design (CAD) to a physical prototype. These prototypes are used as test models before it is finalized as well as sometimes as a final product. Additive Manufacturing has many advantages over the traditional process used to develop a product such as allowing early customer involvement in product development, complex shape generation and also save time as well as money. Additive manufacturing also possess some special challenges that are usually worth overcoming such as Poor Surface quality, Physical Properties and use of specific raw material for manufacturing. To improve the surface quality several attempts had been made by controlling various process parameters of Additive manufacturing and also applying different post processing techniques on components manufactured by Additive manufacturing. The main objective of this work is to document an extensive literature review in the general area of post processing techniques which are used in Additive manufacturing.

Creating a Lunar EVA Work Envelope

NASA Technical Reports Server (NTRS)

Griffin, Brand N.; Howard, Robert; Rajulu, Sudhakar; Smitherman, David

2009-01-01

A work envelope has been defined for weightless Extravehicular Activity (EVA) based on the Space Shuttle Extravehicular Mobility Unit (EMU), but there is no equivalent for planetary operations. The weightless work envelope is essential for planning all EVA tasks because it determines the location of removable parts, making sure they are within reach and visibility of the suited crew member. In addition, using the envelope positions the structural hard points for foot restraints that allow placing both hands on the job and provides a load path for reacting forces. EVA operations are always constrained by time. Tasks are carefully planned to ensure the crew has enough breathing oxygen, cooling water, and battery power. Planning first involves computers using a virtual work envelope to model tasks, next suited crew members in a simulated environment refine the tasks. For weightless operations, this process is well developed, but planetary EVA is different and no work envelope has been defined. The primary difference between weightless and planetary work envelopes is gravity. It influences anthropometry, horizontal and vertical mobility, and reaction load paths and introduces effort into doing "overhead" work. Additionally, the use of spacesuits other than the EMU, and their impacts on range of motion, must be taken into account. This paper presents the analysis leading to a concept for a planetary EVA work envelope with emphasis on lunar operations. There is some urgency in creating this concept because NASA has begun building and testing development hardware for the lunar surface, including rovers, habitats and cargo off-loading equipment. Just as with microgravity operations, a lunar EVA work envelope is needed to guide designers in the formative stages of the program with the objective of avoiding difficult and costly rework.

Computational Nanophotonics: modeling optical interactions and transport in tailored nanosystem architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schatz, George; Ratner, Mark

2014-02-27

This report describes research by George Schatz and Mark Ratner that was done over the period 10/03-5/09 at Northwestern University. This research project was part of a larger research project with the same title led by Stephen Gray at Argonne. A significant amount of our work involved collaborations with Gray, and there were many joint publications as summarized later. In addition, a lot of this work involved collaborations with experimental groups at Northwestern, Argonne, and elsewhere. The research was primarily concerned with developing theory and computational methods that can be used to describe the interaction of light with noble metalmore » nanoparticles (especially silver) that are capable of plasmon excitation. Classical electrodynamics provides a powerful approach for performing these studies, so much of this research project involved the development of methods for solving Maxwell’s equations, including both linear and nonlinear effects, and examining a wide range of nanostructures, including particles, particle arrays, metal films, films with holes, and combinations of metal nanostructures with polymers and other dielectrics. In addition, our work broke new ground in the development of quantum mechanical methods to describe plasmonic effects based on the use of time dependent density functional theory, and we developed new theory concerned with the coupling of plasmons to electrical transport in molecular wire structures. Applications of our technology were aimed at the development of plasmonic devices as components of optoelectronic circuits, plasmons for spectroscopy applications, and plasmons for energy-related applications.« less

Satellite Communications Using Commercial Protocols

NASA Technical Reports Server (NTRS)

Ivancic, William D.; Griner, James H.; Dimond, Robert; Frantz, Brian D.; Kachmar, Brian; Shell, Dan

2000-01-01

NASA Glenn Research Center has been working with industry, academia, and other government agencies in assessing commercial communications protocols for satellite and space-based applications. In addition, NASA Glenn has been developing and advocating new satellite-friendly modifications to existing communications protocol standards. This paper summarizes recent research into the applicability of various commercial standard protocols for use over satellite and space- based communications networks as well as expectations for future protocol development. It serves as a reference point from which the detailed work can be readily accessed. Areas that will be addressed include asynchronous-transfer-mode quality of service; completed and ongoing work of the Internet Engineering Task Force; data-link-layer protocol development for unidirectional link routing; and protocols for aeronautical applications, including mobile Internet protocol routing for wireless/mobile hosts and the aeronautical telecommunications network protocol.

Microstructural Development and Control in Liquid Phase Sintering; Processing, Structures and Properties of Cold Worked Metal Matrix Composites

DTIC Science & Technology

1984-06-03

between them in a composite develops in a manner consistent with the macroscopic axisymmetric deformation of wire drawing or swaging. Additionally, for...spacing) V 0 bo :vsii~f:- nikel omposit’es 0.5 -~ ................................*. . C pper-7chrorhium c2o * - - 0 0 C -io~omposites ~ :13 Nickeil

Fundamentos para Asociados en Desarrollo Infantil quienes trabajan con Ninos Pequenos (Essentials for Child Development Associates Working with Young Children).

ERIC Educational Resources Information Center

Phillips, Carol Brunson, Ed.

A study guide for the Child Development Associate (CDA) Professional Preparation Program, this Spanish-language guidebook contains essential information on the basics of good professional practice for early childhood educators. It includes self-study activities, checklists, and resources for additional information. Unit 1 provides an overview of…

Primarily Statistics: Developing an Introductory Statistics Course for Pre-Service Elementary Teachers

ERIC Educational Resources Information Center

Green, Jennifer L.; Blankenship, Erin E.

2013-01-01

We developed an introductory statistics course for pre-service elementary teachers. In this paper, we describe the goals and structure of the course, as well as the assessments we implemented. Additionally, we use example course work to demonstrate pre-service teachers' progress both in learning statistics and as novice teachers. Overall, the…

Teacher Professional Development outside the Lecture Room: Voices of Professionally Unqualified Practicing Teachers in Rural Zimbabwe Secondary Schools

ERIC Educational Resources Information Center

Mukeredzi, Tabitha Grace

2016-01-01

Attempts to address global pressure to achieve Education for All have been hampered by two fundamental challenges in developing countries, namely an acute shortage of teachers and large rural populations in these countries. In addition, qualified, competent teachers shun working in rural settings. While recruitment of professionally unqualified…

Preventing musculoskeletal disorders in clinical dentistry: strategies to address the mechanisms leading to musculoskeletal disorders.

PubMed

Valachi, Bethany; Valachi, Keith

2003-12-01

The authors reviewed studies to identify methods for dental operators to use to prevent the development of musculoskeletal disorders, or MSDs. The authors reviewed studies that related to the prevention of MSDs among dental operators. Some studies investigated the relationship between the biomechanics of seated working postures and physiological damage or pain. Other studies suggested that repeated unidirectional twisting of the trunk can lead to low back pain, while yet other studies examined the detrimental effects of working in one position for prolonged periods. Additional studies confirmed the roles that operators' flexibility and core strength can play in balanced musculoskeletal health and the need for operators to know how to properly adjust ergonomic equipment. This review indicates that strategies to prevent the multifactorial problem of dental operators' developing MSDs exist. These strategies address deficiencies in operator position, posture, flexibility, strength and ergonomics. Education and additional research are needed to promote an understanding of the complexity of the problem and to address the problem's multifactorial nature. A comprehensive approach to address the problem of MSDs in dentistry represents a paradigm shift in how operators work. New educational models that incorporate a multifactorial approach can be developed to help dental operators manage and prevent MSDs effectively.

Fundamental Technology Development for Gas-Turbine Engine Health Management

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

2007-01-01

Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

Multiple dimensions of work-related risk factors and their relationship to work ability among industrial workers in Iran.

PubMed

Mokarami, Hamidreza; Mortazavi, Seyed Bagher; Asgari, Ali; Choobineh, Alireza; Stallones, Lorann

2017-09-01

The present study was designed to investigate the simultaneous effects of physical, psychosocial and other work-related risk factors on the work ability index (WAI) score among industrial workers. This study used a cross-sectional design with a questionnaire survey. A total of 280 workers were included in the study. Data were collected using three questionnaires including the Persian version of the WAI, the Persian version of the job content questionnaire and an author-developed measure (to assess work-related factors, health-related factors and socio-demographic characteristics). The majority of the participants were young, but they had poor WAI scores (mean 37.3 ± 6.4) and 44.3% of them had poor or moderate work ability. Occupational accidents and injuries were found to be the strongest predictors of WAI scores. Additionally, there was a strong association between WAI scores and supervisor support, skill discretion, occupational training, sleep quality, work nature and educational level. Intervention programs should focus on improving supervisor support, sleep quality, job skills and knowledge and on decreasing physical and mental work demands. Additionally, implementing a comprehensive occupational health and ergonomics program for controlling and reducing hazardous working environments and occupational injury rates should be considered.

Causes and solutions to surface facilities upsets following acid stimulation in the Gulf of Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durham, D.K.; Stone, P.J.; Ali, S.A.

1997-02-01

This paper presents test data on the effects of acid and acid additives on emulsion and water treating in the Gulf of Mexico. This work also discusses the test methods developed to select acid additives and treating chemicals that will allow the producer to treat both oil and water more consistently and cost effectively while the acid flowback is in the system. It also presents system results that confirm the importance of the joint selection of acid and surface treating additives and show that significant cost savings can be gained by use of this process. Also discussed are the propermore » system application techniques for treating chemicals that can minimize surface treating problems caused by acid flowbacks. The results show that the proper selection and use of acid additives and surface treating products can eliminate or significantly reduce costly upsets in oil- and water-treating systems. Data on individual acid additives that impact water and oil treating are also presented. The results of this work are currently being used to solve produced-water- and oil-treating problems on offshore and onshore facilities in and around the Gulf of Mexico by reduction of production losses resulting from acid-flowback-related problems; reduction of the use and cost of tanks and barges used to segregate acid flowbacks; and development of effective methodology to select acid and surface treating additives that have resulted in lower overall treating costs.« less

The effect of cerebral palsy on arithmetic accuracy is mediated by working memory, intelligence, early numeracy, and instruction time.

PubMed

Jenks, Kathleen M; de Moor, Jan; van Lieshout, Ernest C D M; Maathuis, Karel G B; Keus, Inge; Gorter, Jan Willem

2007-01-01

The development of addition and subtraction accuracy was assessed in first graders with cerebral palsy (CP) in both mainstream (16) and special education (41) and a control group of first graders in mainstream education (16). The control group out-performed the CP groups in addition and subtraction accuracy and this difference could not be fully explained by differences in intelligence. Both CP groups showed evidence of working memory deficits. The three groups exhibited different developmental patterns in the area of early numeracy skills. Children with CP in special education were found to receive less arithmetic instruction and instruction time was positively related to arithmetic accuracy. Structural equation modeling revealed that the effect of CP on arithmetic accuracy is mediated by intelligence, working memory, early numeracy, and instruction time.

Final Work Plan: Targeted Investigation at York, Nebraska

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaFreniere, Lorraine M.

The targeted investigation at York will be implemented in phases, so that data collected and interpretations developed at each stage of the program can be evaluated to guide subsequent phases most effectively. Section 2 of this Work Plan presents a brief overview of the York site, its geologic and hydrologic setting, and the previous CCC/USDA investigations. Section 3, outlines the proposed technical program for the targeted investigation, and Section 4 describes the investigative methods to be employed. A community relations plan is in Section 5, and Section 6 includes health and safety information. In addition to this site-specific Work Plan,more » the Master Work Plan (Argonne 2002) developed by Argonne for CCC/USDA investigations in Nebraska should be consulted for complete details of the methods and procedures to be used at York.« less

Summary of the National Institute of Child Health and Human Development-best pharmaceuticals for Children Act Pediatric Formulation Initiatives Workshop-Pediatric Biopharmaceutics Classification System Working Group.

PubMed

Abdel-Rahman, Susan M; Amidon, Gordon L; Kaul, Ajay; Lukacova, Viera; Vinks, Alexander A; Knipp, Gregory T

2012-11-01

The Biopharmaceutics Classification System (BCS) allows compounds to be classified based on their in vitro solubility and intestinal permeability. The BCS has found widespread use in the pharmaceutical community to be an enabling guide for the rational selection of compounds, formulation for clinical advancement, and generic biowaivers. The Pediatric Biopharmaceutics Classification System (PBCS) Working Group was convened to consider the possibility of developing an analogous pediatric-based classification system. Because there are distinct developmental differences that can alter intestinal contents, volumes, permeability, and potentially biorelevant solubilities at different ages, the PBCS Working Group focused on identifying age-specific issues that need to be considered in establishing a flexible, yet rigorous PBCS. We summarized the findings of the PBCS Working Group and provided insights into considerations required for the development of a PBCS. Through several meetings conducted both at The Eunice Kennedy Shriver National Institute of Child Health, Human Development-US Pediatric Formulation Initiative Workshop (November 2011) and via teleconferences, the PBCS Working Group considered several high-level questions that were raised to frame the classification system. In addition, the PBCS Working Group identified a number of knowledge gaps that need to be addressed to develop a rigorous PBCS. It was determined that for a PBCS to be truly meaningful, it needs to be broken down into several different age groups that account for developmental changes in intestinal permeability, luminal contents, and gastrointestinal (GI) transit. Several critical knowledge gaps were identified, including (1) a lack of fully understanding the ontogeny of drug metabolizing enzymes and transporters along the GI tract, in the liver, and in the kidney; (2) an incomplete understanding of age-based changes in the GI, liver, and kidney physiology; (3) a clear need to better understand age-based intestinal permeability and fraction absorbed required to develop the PBCS; (4) a clear need for the development and organization of pediatric tissue biobanks to serve as a source for ontogenic research; and (5) a lack of literature published in age-based pediatric pharmacokinetics to build physiologically- and population-based pharmacokinetic (PBPK) databases. To begin the process of establishing a PBPK model, 10 pediatric therapeutic agents were selected (based on their adult BCS classifications). These agents should be targeted for additional research in the future. The PBCS Working Group also identified several areas where greater emphasis on research was needed to enable the development of a PBCS. Copyright © 2012 Elsevier HS Journals, Inc. All rights reserved.

[A study of work stress and professional commitment in outpatient department nurses].

PubMed

Tsai, Ming-Hsiu; Liu, Meng-Fen; Chen, Yu-Ju; Liu, Cheng-Ching

2012-06-01

Nurses working in outpatient departments face tremendous pressure from multiple sources. The effect of nurse professional commitment on continued professional development is an issue worth exploring further. This study explored relationships among nurses' personal attributes, work stress and professional commitment. The Lazarus cognitive appraisal model framed the research plan design. Tools used included stress level and professional commitment scales for healthcare professionals. Of 180 questionnaires sent to outpatient department nurses nurses, 171 (95%) were returned and used in analysis. SPSS 12.0 for windows software was used for statistical analysis. We found a significant negative correlation between work stress and professional commitment and no significant relationship between level of education and either ability to handle work stress or professional commitment. Years of work experience, age and position all correlated positively with ability to handle work stress. Years of work experience correlated positively with professional commitment. This study suggests that nurses experience the highest work stress levels during their first five years of work. Findings show that providing nurses a clear career development path, in addition to attractive incentives and a reasonable workload, is essential to reducing work stress, bolstering professional commitment and increasing retention.

Applying Evolutionary Prototyping In Developing LMIS: A Spatial Web-Based System For Land Management

NASA Astrophysics Data System (ADS)

Agustiono, W.

2018-01-01

Software development project is a difficult task. Especially for software designed to comply with regulations that are constantly being introduced or changed, it is almost impossible to make just one change during the development process. Even if it is possible, nonetheless, the developers may take bulk of works to fix the design to meet specified needs. This iterative work also means that it takes additional time and potentially leads to failing to meet the original schedule and budget. In such inevitable changes, it is essential for developers to carefully consider and use an appropriate method which will help them carry out software project development. This research aims to examine the implementation of a software development method called evolutionary prototyping for developing software for complying regulation. It investigates the development of Land Management Information System (pseudonym), initiated by the Australian government, for use by farmers to meet regulatory demand requested by Soil and Land Conservation Act. By doing so, it sought to provide understanding the efficacy of evolutionary prototyping in helping developers address frequent changing requirements and iterative works but still within schedule. The findings also offer useful practical insights for other developers who seek to build similar regulatory compliance software.

Syntactic Recursion Facilitates and Working Memory Predicts Recursive Theory of Mind

PubMed Central

Arslan, Burcu; Hohenberger, Annette; Verbrugge, Rineke

2017-01-01

In this study, we focus on the possible roles of second-order syntactic recursion and working memory in terms of simple and complex span tasks in the development of second-order false belief reasoning. We tested 89 Turkish children in two age groups, one younger (4;6–6;5 years) and one older (6;7–8;10 years). Although second-order syntactic recursion is significantly correlated with the second-order false belief task, results of ordinal logistic regressions revealed that the main predictor of second-order false belief reasoning is complex working memory span. Unlike simple working memory and second-order syntactic recursion tasks, the complex working memory task required processing information serially with additional reasoning demands that require complex working memory strategies. Based on our results, we propose that children’s second-order theory of mind develops when they have efficient reasoning rules to process embedded beliefs serially, thus overcoming a possible serial processing bottleneck. PMID:28072823

Challenges of work-life balance for women physicians/mothers working in leadership positions.

PubMed

Schueller-Weidekamm, Claudia; Kautzky-Willer, Alexandra

2012-08-01

Female leadership in medicine is still disproportionately small, which might be due to the barriers of combining work and family. The aim of this study was, first, to perform a strengths, weakness, opportunities, and threats (SWOT) analysis and, second, to create a strategic concept for career development. In this study, all women in leadership positions in the health care system in Vienna, Austria, with at least 1 child (n = 8), were interviewed about the advantages and disadvantages of gender with regard to career development, the strengths and weaknesses of female leadership, and their work-life balance. Different factors that influenced the work-life balance were specified, and career strategies to realize adequate solutions were developed. The sporadic focus on career advancement, time-consuming child care, responsibility for family life, and a woman's tendency toward understatement were barriers to career development. Work-family enrichment has a positive spillover effect that spreads positive energy and helps to balance the work-life relationship. For each individual, the allocation and interaction of different resources such as time, money, scope of decision making, and physical, emotional, and social resources, were essential to maintain the individual work-life balance. In addition to the existing "glass ceiling," the predominant responsibility for child care is still borne by the woman. However, mentoring programs, coaching, networking, and support of the partner or of other people help to strengthen female "soft" skills and achieve a work-life balance. Copyright © 2012 Elsevier HS Journals, Inc. All rights reserved.

Developing Professional Learning for Staff Working with Children with Speech, Language and Communication Needs Combined with Moderate-Severe Learning Difficulties

ERIC Educational Resources Information Center

Anderson, Carolyn

2011-01-01

This article presents research undertaken as part of a PhD by Carolyn Anderson who is a senior lecturer on the BSc (Hons) in Speech and Language Pathology at the University of Strathclyde. The study explores the professional learning experiences of 49 teachers working in eight schools and units for children with additional support needs in…

Predicting the Ability of Marine Mammal Populations to Compensate for Behavioral Disturbances

DTIC Science & Technology

2013-09-30

can impact vital rates. Influence of life history strategies Recent work on PCOD has developed some first insights in the differences that exist...IMPACT/APPLICATIONS We will address needs to assess population consequences of acoustic disturbance (PCAD using PCOD framework) and provide a...particularly in data poor conditions. In addition, this work will provide new metrics to complement efforts to implement PCOD in situations where data

TRAC-Monterey FY16 Work Program Development and Report of Research Elicitation

DTIC Science & Technology

2016-01-01

any changes to priorities or additional projects that require immediate research. Work Program; Research Elicitation Unclassified UU UU UU UU 35 MAJ...conduct analysis for the Army. 1 Marks, Chris, Nesbitt, Peter. TRAC FY14 Research Requirements Elicitation . Technical Report TRAC-M-TM-13-059. 700 Dyer... Requirements Elicitation Interviews Interview Guide: 1. Describe a research requirement in the areas of topics, techniques, and methodologies. 2

78 FR 9987 - Call for Expert Reviewers to the U.S. Government Review of the 2013 Supplement to the 2006...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... . Following an invitation from the UNFCCC to ``undertake further methodological work on wetlands, focusing on... developing additional national-level inventory methodological guidance on wetlands, including default...

ARBOOK: Development and Assessment of a Tool Based on Augmented Reality for Anatomy

NASA Astrophysics Data System (ADS)

Ferrer-Torregrosa, J.; Torralba, J.; Jimenez, M. A.; García, S.; Barcia, J. M.

2015-02-01

The evolution of technologies and the development of new tools with educational purposes are growing up. This work presents the experience of a new tool based on augmented reality (AR) focusing on the anatomy of the lower limb. ARBOOK was constructed and developed based on TC and MRN images, dissections and drawings. For ARBOOK evaluation, a specific questionnaire of three blocks was performed and validated according to the Delphi method. The questionnaire included motivation and attention tasks, autonomous work and three-dimensional interpretation tasks. A total of 211 students from 7 public and private Spanish universities were divided in two groups. Control group received standard teaching sessions supported by books, and video. The ARBOOK group received the same standard sessions but additionally used the ARBOOK tool. At the end of the training, a written test on lower limb anatomy was done by students. Statistically significant better scorings for the ARBOOK group were found on attention-motivation, autonomous work and three-dimensional comprehension tasks. Additionally, significantly better scoring was obtained by the ARBOOK group in the written test. The results strongly suggest that the use of AR is suitable for anatomical purposes. Concretely, the results indicate how this technology is helpful for student motivation, autonomous work or spatial interpretation. The use of this type of technologies must be taken into account even more at the present moment, when new technologies are naturally incorporated to our current lives.

Developing Benchmarks for Solar Radio Bursts

NASA Astrophysics Data System (ADS)

Biesecker, D. A.; White, S. M.; Gopalswamy, N.; Black, C.; Domm, P.; Love, J. J.; Pierson, J.

2016-12-01

Solar radio bursts can interfere with radar, communication, and tracking signals. In severe cases, radio bursts can inhibit the successful use of radio communications and disrupt a wide range of systems that are reliant on Position, Navigation, and Timing services on timescales ranging from minutes to hours across wide areas on the dayside of Earth. The White House's Space Weather Action Plan has asked for solar radio burst intensity benchmarks for an event occurrence frequency of 1 in 100 years and also a theoretical maximum intensity benchmark. The solar radio benchmark team was also asked to define the wavelength/frequency bands of interest. The benchmark team developed preliminary (phase 1) benchmarks for the VHF (30-300 MHz), UHF (300-3000 MHz), GPS (1176-1602 MHz), F10.7 (2800 MHz), and Microwave (4000-20000) bands. The preliminary benchmarks were derived based on previously published work. Limitations in the published work will be addressed in phase 2 of the benchmark process. In addition, deriving theoretical maxima requires additional work, where it is even possible to, in order to meet the Action Plan objectives. In this presentation, we will present the phase 1 benchmarks and the basis used to derive them. We will also present the work that needs to be done in order to complete the final, or phase 2 benchmarks.

High-sensitivity, real-time, ratiometric imaging of surface-enhanced Raman scattering nanoparticles with a clinically translatable Raman endoscope device.

PubMed

Garai, Ellis; Sensarn, Steven; Zavaleta, Cristina L; Van de Sompel, Dominique; Loewke, Nathan O; Mandella, Michael J; Gambhir, Sanjiv S; Contag, Christopher H

2013-09-01

Topical application and quantification of targeted, surface-enhanced Raman scattering (SERS) nanoparticles offer a new technique that has the potential for early detection of epithelial cancers of hollow organs. Although less toxic than intravenous delivery, the additional washing required to remove unbound nanoparticles cannot necessarily eliminate nonspecific pooling. Therefore, we developed a real-time, ratiometric imaging technique to determine the relative concentrations of at least two spectrally unique nanoparticle types, where one serves as a nontargeted control. This approach improves the specific detection of bound, targeted nanoparticles by adjusting for working distance and for any nonspecific accumulation following washing. We engineered hardware and software to acquire SERS signals and ratios in real time and display them via a graphical user interface. We report quantitative, ratiometric imaging with nanoparticles at pM and sub-pM concentrations and at varying working distances, up to 50 mm. Additionally, we discuss optimization of a Raman endoscope by evaluating the effects of lens material and fiber coating on background noise, and theoretically modeling and simulating collection efficiency at various working distances. This work will enable the development of a clinically translatable, noncontact Raman endoscope capable of rapidly scanning large, topographically complex tissue surfaces for small and otherwise hard to detect lesions.

Working in partnership with the voluntary sector: early explorer clinics.

PubMed

Coe, Chris; Barlow, Jane

2010-11-01

The first three years of life have been identified as key to promoting children's later wellbeing, and partnership working across the statutory and voluntary sectors has been proposed as one of the best ways to meet the needs of families. Child health clinics are attended by parents seeking reassurance or help and advice from a health professional regarding child health and development. They have been used in Oxford to develop Early Explorer clinics, in which the statutory health visiting service and voluntary sector Peers Early Education Programme work together with the aim of improving outcomes for children and families. These Early Explorer clinics provide the opportunity to engage parents in supporting their child's development through interaction and non-directed exploratory play. They also offer opportunities to identify vulnerable families, who are provided with additional support. This paper examines a model of partnership working between statutory and voluntary sectors aimed at maximising opportunities to promote the health and wellbeing of infants and their families.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan Hruska

Currently, small Unmanned Aerial Vehicles (UAVs) are primarily used for capturing and down-linking real-time video. To date, their role as a low-cost airborne platform for capturing high-resolution, georeferenced still imagery has not been fully utilized. On-going work within the Unmanned Vehicle Systems Program at the Idaho National Laboratory (INL) is attempting to exploit this small UAV-acquired, still imagery potential. Initially, a UAV-based still imagery work flow model was developed that includes initial UAV mission planning, sensor selection, UAV/sensor integration, and imagery collection, processing, and analysis. Components to support each stage of the work flow are also being developed. Critical tomore » use of acquired still imagery is the ability to detect changes between images of the same area over time. To enhance the analysts’ change detection ability, a UAV-specific, GIS-based change detection system called SADI or System for Analyzing Differences in Imagery is under development. This paper will discuss the associated challenges and approaches to collecting still imagery with small UAVs. Additionally, specific components of the developed work flow system will be described and graphically illustrated using varied examples of small UAV-acquired still imagery.« less

Development of a competency based training programme to support multidisciplinary working in a combined biochemistry/haematology laboratory

PubMed Central

Woods, R; Longmire, W; Galloway, M; Smellie, W

2000-01-01

The aim of this study was to develop a competency based training programme to support multidisciplinary working in a combined biochemistry and haematology laboratory. The training programme was developed to document that staff were trained in the full range of laboratory tests that they were expected to perform. This programme subsequently formed the basis for the annual performance review of all staff. All staff successfully completed the first phase of the programme. This allowed laboratory staff to work unsupervised at night as part of a partial shift system. All staff are now working towards achieving a level of competence equivalent to the training level required for state registration by the Council for Professions Supplementary to Medicine. External evaluation of the training programme has included accreditation by the Council for Professions Supplementary to Medicine and reinspection by Clinical Pathology Accreditation (UK) Ltd. The development of a competency based training system has facilitated the introduction of multidisciplinary working in the laboratory. In addition, it enables the documentation of all staff to ensure that they are fully trained and are keeping up to date, because the continuing professional development programme in use in our laboratory has been linked to this training scheme. This approach to documentation of training facilitated a recent reinspection by Clinical Pathology Accreditation (UK) Ltd. Key Words: Keyword: multidisciplinary working • competency based training PMID:10889827

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts.

PubMed

Shah, Hemant; Allard, Raymond D; Enberg, Robert; Krishnan, Ganesh; Williams, Patricia; Nadkarni, Prakash M

2012-03-09

A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies.

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts

PubMed Central

2012-01-01

Background A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. Methods In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). Results The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. Conclusions When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies. PMID:22405400

Specific memory impairment following neonatal encephalopathy in term-born children.

PubMed

van Handel, Mariëlle; de Sonneville, Leo; de Vries, Linda S; Jongmans, Marian J; Swaab, Hanna

2012-01-01

This study examines short-term memory, verbal working memory, episodic long-term memory, and intelligence in 32 children with mild neonatal encephalopathy (NE), 39 children with moderate NE, 10 children with NE who developed cerebral palsy (CP), and 53 comparison children, at the age of 9 to 10 years. in addition to a global effect on intelligence, NE had a specific effect on verbal working memory, verbal and visuo-spatial long-term memory, and learning, which was associated with degree of NE. Although these memory problems occurred in children without CP, they were more pronounced when children had also developed CP.

Experimental Investigation and Demonstration of Rotary-Wing Technologies for Flight in the Atmosphere of Mars

NASA Technical Reports Server (NTRS)

Young, L. A.; Derby, M. R.; Demblewski, R.; Navarrete, J.

2002-01-01

This paper details ongoing work at NASA Ames Research Center as to experimental investigations and demonstrations related to rotary-wing technologies that might be applied to flight in the atmosphere of Mars. Such Mars rotorcraft would provide a 'three-dimensional mobility' to the exploration of the Red Planet. Preliminary results from isolated rotor testing in Mars-representative atmospheric densities, as well as progress towards coaxial test stand development are discussed. Additionally, work towards the development and use of surrogate flight vehicles -- in the terrestrial environment -- to demonstrate key technologies is also summarized.

Child Support Enforcement: A Framework for Evaluating Costs, Benefits, and Effects.

DTIC Science & Technology

1991-03-01

efforts to gain and enforce child support awards might yield additional collections on behalf of these children, they would surely entail additional...framework for evaluating the full costs and ne . effects of child support enforcement.I This framework could assist your office and others in planning...following results of our develop- S . ............. .. mental work: (1) models of the child support enforcement system activi- AvajiabilitY Codes. ties

Visible and shortwave infrared focal planes for remote sensing instruments

NASA Astrophysics Data System (ADS)

Tower, J. R.; McCarthy, B. M.; Pellon, L. E.; Strong, R. T.; Elabd, H.

1984-01-01

The development of solid-state sensor technology for multispectral linear array (MLA) instruments is described. A buttable four-spectral-band linear-format CCD and a buttable two-spectral band linear-format short-wave IR CCD have been designed, and first samples have been demonstrated. In addition, first-sample four-band interference filters have been fabricated, and hybrid packaging technology is being developed. Based on this development work, the design and construction of focal planes for a Shuttle sortie MLA instrument have begun. This work involves a visible and near-IR focal plane with 2048 pixels x 4 spectral bands and a short-wave IR focal plane with 1024 pixels x 2 spectral bands.

Commercial Crew Vehicle Ascent Abort Simulation and Analysis

NASA Technical Reports Server (NTRS)

Gnam, Christopher

2017-01-01

SpaceX and Boeing have been selected to develop and operate crew vehicles to transport astronauts to and from the International Space Station. Their design work is to be analyzed to ensure that they are meeting all of the safety and operational requirements put forth by NASA. Throughout my time here, I worked familiarized myself with the SpaceX Dragon Abort system, as well as the NASA Human-Systems Integration Requirements (HSIR). This included understanding the different abort scenarios, and how each one could potentially impact the astronaut crew. In addition, I familiarized myself with the simulation developed my NASA to test and analyze the Guidance Navigation and Control (GN&C) systems developed by SpaceX and Boeing.

[Work-related medical rehabilitation for patients with rheumatic diseases].

PubMed

Ehlebracht-König, I; Dorn, M

2014-02-01

In recent years work-related rehabilitation has been intensified. Several studies have shown the effectiveness of work-related interventions in medical rehabilitation by improving participation in the work force and reducing sick leave. The German pension insurance fund has developed standardized requirements for medical work-related rehabilitation which include diagnostic procedures to identify patients with specific occupational problems and vocation-related interventions. These requirements address patients across different indications and diagnoses. Rehabilitation centers are assigned to different levels of work-related interventions depending on the intensity and specificity of the profile. Centers providing the complete range of work-related interventions offer differentiated work-related diagnostics, job training and occupational groups in addition to general social advice. In this article four case studies with different priorities regarding vocational interventions are presented.

Working memory span in Persian-speaking children with speech sound disorders and normal speech development.

PubMed

Afshar, Mohamad Reza; Ghorbani, Ali; Rashedi, Vahid; Jalilevand, Nahid; Kamali, Mohamad

2017-10-01

The aim of this study was to compare working memory span in Persian-speaking preschool children with speech sound disorder (SSD) and their typically speaking peers. Additionally, the study aimed to examine Non-Word Repetition (NWR), Forward Digit Span (FDS) and Backward Digit Span (BDS) in four groups of children with varying severity levels of SSD. The participants in this study comprised 35 children with SSD and 35 typically developing (TD) children -matched for age and sex-as a control group. The participants were between the age range of 48 and 72 months. Two components of working memory including phonological loop and central executive were compared between two groups. We used two tasks (NWR and FDS) to assess phonological loop component, and one task (BDS) to assess central executive component. Percentage of correct consonants (PCC) was used to calculate the severity of SSD. Significant differences were observed between the two groups in all tasks that assess working memory (p < 0.001). In addition, the comparison of the phonological loop of working memory between the various severity groups indicated significant differences between different severities of both NWR and FDS tasks among the SSD children (p < 0.001). Nevertheless, comparison of the central executive between various severity groups, which was assessed with the BDS task, did not show any significant differences (p > 0.05). The result showed that PCC scores in TD children were associated with NWR (p < 0.001), FDS (p = 0.001), and BDS (p < 0.001). Furthermore, PCC scores in SSD children were associated with NWR and FDS (p < 0.001), but not with BDS (p > 0.05). The working memory skills were weaker in SSD children, in comparison to TD children. In addition, children with varying levels of severity of SSD differed in terms of NWR and FSD, but not BDS. Copyright © 2017 Elsevier B.V. All rights reserved.

Cognitive Behavioral Performance of Untreated Depressed Patients with Mild Depressive Symptoms

PubMed Central

Li, Mi; Zhong, Ning; Lu, Shengfu; Wang, Gang; Feng, Lei; Hu, Bin

2016-01-01

This study evaluated the working memory performance of 18 patients experiencing their first onset of mild depression without treatment and 18 healthy matched controls. The results demonstrated that working memory impairment in patients with mild depression occurred when memorizing the position of a picture but not when memorizing the pictures themselves. There was no significant difference between the two groups in the emotional impact on the working memory, indicating that the attenuation of spatial working memory was not affected by negative emotion; however, cognitive control selectively affected spatial working memory. In addition, the accuracy of spatial working memory in the depressed patients was not significantly reduced, but the reaction time was significantly extended compared with the healthy controls. This finding indicated that there was no damage to memory encoding and function maintenance in the patients but rather only impaired memory retrieval, suggesting that the extent of damage to the working memory system and cognitive control abilities was associated with the corresponding depressive symptoms. The development of mild to severe depressive symptoms may be accompanied by spatial working memory damage from the impaired memory retrieval function extending to memory encoding and memory retention impairments. In addition, the impaired cognitive control began with an inadequate capacity to automatically process internal negative emotions and further extended to impairment of the ability to regulate and suppress external emotions. The results of the mood-congruent study showed that the memory of patients with mild symptoms of depression was associated with a mood-congruent memory effect, demonstrating that mood-congruent memory was a typical feature of depression, regardless of the severity of depression. This study provided important information for understanding the development of cognitive dysfunction. PMID:26730597

Development of photovoltaic array and module safety requirements

NASA Technical Reports Server (NTRS)

1982-01-01

Safety requirements for photovoltaic module and panel designs and configurations likely to be used in residential, intermediate, and large-scale applications were identified and developed. The National Electrical Code and Building Codes were reviewed with respect to present provisions which may be considered to affect the design of photovoltaic modules. Limited testing, primarily in the roof fire resistance field was conducted. Additional studies and further investigations led to the development of a proposed standard for safety for flat-plate photovoltaic modules and panels. Additional work covered the initial investigation of conceptual approaches and temporary deployment, for concept verification purposes, of a differential dc ground-fault detection circuit suitable as a part of a photovoltaic array safety system.

Cost-effectiveness of PET and PET/computed tomography: a systematic review.

PubMed

Gerke, Oke; Hermansson, Ronnie; Hess, Søren; Schifter, Søren; Vach, Werner; Høilund-Carlsen, Poul Flemming

2015-01-01

The development of clinical diagnostic procedures comprises early-phase and late-phase studies to elucidate diagnostic accuracy and patient outcome. Economic assessments of new diagnostic procedures compared with established work-ups indicate additional cost for 1 additional unit of effectiveness measure by means of incremental cost-effectiveness ratios when considering the replacement of the standard regimen by a new diagnostic procedure. This article discusses economic assessments of PET and PET/computed tomography reported until mid-July 2014. Forty-seven studies on cancer and noncancer indications were identified but, because of the widely varying scope of the analyses, a substantial amount of work remains to be done. Copyright © 2015 Elsevier Inc. All rights reserved.

Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Popova, Evdokia; Rodgers, Theron M.; Gong, Xinyi

A novel data science workflow is developed and demonstrated to extract process-structure linkages (i.e., reduced-order model) for microstructure evolution problems when the final microstructure depends on (simulation or experimental) processing parameters. Our workflow consists of four main steps: data pre-processing, microstructure quantification, dimensionality reduction, and extraction/validation of process-structure linkages. These methods that can be employed within each step vary based on the type and amount of available data. In this paper, this data-driven workflow is applied to a set of synthetic additive manufacturing microstructures obtained using the Potts-kinetic Monte Carlo (kMC) approach. Additive manufacturing techniques inherently produce complex microstructures thatmore » can vary significantly with processing conditions. Using the developed workflow, a low-dimensional data-driven model was established to correlate process parameters with the predicted final microstructure. In addition, the modular workflows developed and presented in this work facilitate easy dissemination and curation by the broader community.« less

Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data

DOE PAGES

Popova, Evdokia; Rodgers, Theron M.; Gong, Xinyi; ...

2017-03-13

A novel data science workflow is developed and demonstrated to extract process-structure linkages (i.e., reduced-order model) for microstructure evolution problems when the final microstructure depends on (simulation or experimental) processing parameters. Our workflow consists of four main steps: data pre-processing, microstructure quantification, dimensionality reduction, and extraction/validation of process-structure linkages. These methods that can be employed within each step vary based on the type and amount of available data. In this paper, this data-driven workflow is applied to a set of synthetic additive manufacturing microstructures obtained using the Potts-kinetic Monte Carlo (kMC) approach. Additive manufacturing techniques inherently produce complex microstructures thatmore » can vary significantly with processing conditions. Using the developed workflow, a low-dimensional data-driven model was established to correlate process parameters with the predicted final microstructure. In addition, the modular workflows developed and presented in this work facilitate easy dissemination and curation by the broader community.« less

Work-related medical rehabilitation in patients with musculoskeletal disorders: the protocol of a propensity score matched effectiveness study (EVA-WMR, DRKS00009780).

PubMed

Neuderth, Silke; Schwarz, Betje; Gerlich, Christian; Schuler, Michael; Markus, Miriam; Bethge, Matthias

2016-08-17

Musculoskeletal disorders are one of the most important causes of work disability. Various rehabilitation services and return-to-work programs have been developed in order to reduce sickness absence and increase sustainable return-to-work. As the effects of conventional medical rehabilitation programs on sickness absence duration were shown to be slight, work-related medical rehabilitation programs have been developed and tested. While such studies proved the efficacy of work-related medical rehabilitation compared with conventional medical rehabilitation in well-conducted randomized controlled trials, its effectiveness under real-life conditions has yet to be proved. The cohort study will be performed under real-life conditions with two parallel groups. Participants will receive either a conventional or a work-related medical rehabilitation program. Propensity score matching will be used to identify controls that are comparable to treated work-related medical rehabilitation patients. Over a period of three months, about 18,000 insured patients with permission to undergo a musculoskeletal rehabilitation program will be contacted. Of these, 15,000 will receive a conventional and 3,000 a work-related medical rehabilitation. We expect a participation rate of 40 % at baseline. Patients will be aged 18 to 65 years and have chronic musculoskeletal disorders, usually back pain. The control group will receive a conventional medical rehabilitation program without any explicit focus on work, work ability and return to work in diagnostics and therapy. The intervention group will receive a work-related medical rehabilitation program that in addition to common rehabilitation treatments contains 11 to 25 h of work-related treatment modules. Follow-up data will be assessed three and ten months after patients' discharge from the rehabilitation center. Additionally, department characteristics will be assessed and administrative data records used. The primary outcomes are sick leave duration, stable return to work and subjective work ability. Secondary outcomes cover several dimensions of health, functioning and coping strategies. This study will determine the relative effectiveness of a complex, newly implemented work-related rehabilitation strategy for patients with musculoskeletal disorders. German Clinical Trials Register ( DRKS00009780 , February 10, 2016).

First-Grade Predictors of Mathematical Learning Disability: A Latent Class Trajectory Analysis

PubMed Central

Geary, David C.; Bailey, Drew H.; Littlefield, Andrew; Wood, Phillip; Hoard, Mary K.; Nugent, Lara

2009-01-01

Kindergarten to 3rd grade mathematics achievement scores from a prospective study of mathematical development were subjected to latent growth trajectory analyses (n = 306). The four corresponding classes included children with mathematical learning disability (MLD, 6% of sample), and low (LA, 50%), typically (TA, 39%) and high (HA, 5%) achieving children. The groups were administered a battery of intelligence (IQ), working memory, and mathematical-cognition measures in 1st grade. The children with MLD had general deficits in working memory and IQ, and potentially more specific deficits on measures of number sense. The LA children did not have working memory or IQ deficits, but showed moderate deficits on these number sense measures and for addition fact retrieval. The distinguishing features of the HA children were a strong visuospatial working memory, a strong number sense, and frequent use of memory-based processes to solve addition problems. Implications for the early identification of children at risk for poor mathematics achievement are discussed. PMID:20046817

Achieving Consensus for the Design and Delivery of an Online Intervention to Support Midwives in Work-Related Psychological Distress: Results From a Delphi Study.

PubMed

Pezaro, Sally; Clyne, Wendy

2016-07-12

Some midwives are known to experience both professional and organizational sources of psychological distress, which can manifest as a result of the emotionally demanding midwifery work, and the traumatic work environments they endure. An online intervention may be one option midwives may engage with in pursuit of effective support. However, the priorities for the development of an online intervention to effectively support midwives in work-related psychological distress have yet to be explored. The aim of this study was to explore priorities in the development of an online intervention to support midwives in work-related psychological distress. A two-round online Delphi study was conducted. This study invited both qualitative and quantitative data from experts recruited via a scoping literature search and social media channels. In total, 185 experts were invited to participate in this Delphi study. Of all participants invited to contribute, 35.7% (66/185) completed Round 1 and of those who participated in this first round, 67% (44/66) continued to complete Round 2. Out of 39 questions posed over two rounds, 18 statements (46%) achieved consensus, 21 (54%) did not. Participants were given the opportunity to write any additional comments as free text. In total, 1604 free text responses were collected and categorized into 2446 separate statements of opinion, creating a total of 442 themes. Overall, participants agreed that in order to effectively support midwives in work-related psychological distress, online interventions should make confidentiality and anonymity a high priority, along with 24-hour mobile access, effective moderation, an online discussion forum, and additional legal, educational, and therapeutic components. It was also agreed that midwives should be offered a simple user assessment to identify those people deemed to be at risk of either causing harm to others or experiencing harm themselves, and direct them to appropriate support. This study has identified priorities for the development of online interventions to effectively support midwives in work-related psychological distress. The impact of any future intervention of this type will be optimized by utilizing these findings in the development process.

Achieving Consensus for the Design and Delivery of an Online Intervention to Support Midwives in Work-Related Psychological Distress: Results From a Delphi Study

PubMed Central

Clyne, Wendy

2016-01-01

Background Some midwives are known to experience both professional and organizational sources of psychological distress, which can manifest as a result of the emotionally demanding midwifery work, and the traumatic work environments they endure. An online intervention may be one option midwives may engage with in pursuit of effective support. However, the priorities for the development of an online intervention to effectively support midwives in work-related psychological distress have yet to be explored. Objective The aim of this study was to explore priorities in the development of an online intervention to support midwives in work-related psychological distress. Methods A two-round online Delphi study was conducted. This study invited both qualitative and quantitative data from experts recruited via a scoping literature search and social media channels. Results In total, 185 experts were invited to participate in this Delphi study. Of all participants invited to contribute, 35.7% (66/185) completed Round 1 and of those who participated in this first round, 67% (44/66) continued to complete Round 2. Out of 39 questions posed over two rounds, 18 statements (46%) achieved consensus, 21 (54%) did not. Participants were given the opportunity to write any additional comments as free text. In total, 1604 free text responses were collected and categorized into 2446 separate statements of opinion, creating a total of 442 themes. Overall, participants agreed that in order to effectively support midwives in work-related psychological distress, online interventions should make confidentiality and anonymity a high priority, along with 24-hour mobile access, effective moderation, an online discussion forum, and additional legal, educational, and therapeutic components. It was also agreed that midwives should be offered a simple user assessment to identify those people deemed to be at risk of either causing harm to others or experiencing harm themselves, and direct them to appropriate support. Conclusions This study has identified priorities for the development of online interventions to effectively support midwives in work-related psychological distress. The impact of any future intervention of this type will be optimized by utilizing these findings in the development process. PMID:27405386

Recovery after shift work: Relation to coronary risk factors in women.

PubMed

Axelsson, John; Lowden, Arne; Kecklund, Göran

2006-01-01

Shift work increases the risk for developing cardiovascular disease. There is, however, little knowledge of what aspects of shift scheduling that are detrimental and what characteristics promote good health. The aim of the present study was to evaluate whether coronary risk factors deteriorate after a hard work period and whether recovery, in the form of a week off, was sufficient to improve them. A total of 19 women worked an extremely rapidly rotating and clockwise shift schedule at a paper and pulp factory. They underwent two health examinations, one at the end of the work period and one after the week off. In addition, the women were divided into a tolerant and a vulnerable group, depending on their satisfaction with their work hours. Most risk factors did not change, but total cholesterol and low-density lipoprotein (LDL)-cholesterol were lower after the working period than after the week-off. In addition, vulnerable women had higher levels of total cholesterol and a higher ratio of total cholesterol/high-density lipoprotein (HDL) than tolerant ones. In conclusion, the finding that a week-off worsens cholesterol levels was against our hypothesis and suggests further studies on how activities/responsibilities outside the workplace affect shift-working women. It was also shown that susceptible shift workers had worse lipid profiles.

Biocompatible materials developments for new medical implants.

PubMed

Hodgins, Diana; Wasikiewicz, J M; Grahn, M F; Paul, D; Roohpour, N; Vadgama, P; Silmon, Angela M; Cousins, Bernard; Verdon, Brian

2007-10-01

Recent work on modifying silicone rubber to improve water permeability and biocompatibility is described. In addition, modifications to the interface between an active implanted device and the body are reported, which have led to reduced power consumption and improved device performance.

76 FR 43988 - Procurement List; Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

... Sill, OK. NPAs: Professional Contract Services, Inc., Austin, TX (Prime Contractor); Work Services.... Contracting Activity: General Services Administration, Fort Worth, TX Coverage: A-List for the Total...: Department of the Army Research, Development, & Engineering Command, Natick, MA. Coverage: C-List for 100% of...

Experimental investigation on the development characteristics of initial electrons in a gas pressurized closing switch under DC voltage

NASA Astrophysics Data System (ADS)

Rongxiao, ZHAI; Mengtong, QIU; Weixi, LUO; Peitian, CONG; Tao, HUANG; Jiahui, YIN; Tianyang, ZHANG

2018-04-01

As one of the most important elements in linear transformer driver (LTD) based systems, the gas pressurized closing switches are required to operate with a very low prefire probability during the DC-charging process to ensure reliable operation and stable output of the whole pulsed power system. The most direct and effective way to control the prefire probability is to select a suitable working coefficient. The study of the development characteristics of the initially generated electrons is useful for optimizing the working coefficient and improving the prefire characteristic of the switches. In this paper an ultraviolet pulsed laser is used to generate initial electrons inside the gap volume. A current measuring system is used to measure the time-dependent current generated by the growth of the initial electrons so as to study the development characteristics of the electrons under different working coefficients. Experimental results show that the development characteristics of the initial electrons are influenced obviously by the working coefficient. With the increase of the working coefficient, the development degree of the electrons increases consequently. At the same times, there is a threshold of working coefficient which produces the effect of ionization on electrons. The range of the threshold has a slow growth but remains close to 65% with the gas pressure increase. When the working coefficient increases further, γ processes are starting to be generated inside the gap volume. In addition, an optimal working coefficient beneficial for improving the prefire characteristic is indicated and further tested.

Dehydroepiandrosterone impacts working memory by shaping cortico-hippocampal structural covariance during development.

PubMed

Nguyen, Tuong-Vi; Wu, Mia; Lew, Jimin; Albaugh, Matthew D; Botteron, Kelly N; Hudziak, James J; Fonov, Vladimir S; Collins, D Louis; Campbell, Benjamin C; Booij, Linda; Herba, Catherine; Monnier, Patricia; Ducharme, Simon; McCracken, James T

2017-12-01

Existing studies suggest that dehydroepiandrosterone (DHEA) may be important for human brain development and cognition. For example, molecular studies have hinted at the critical role of DHEA in enhancing brain plasticity. Studies of human brain development also support the notion that DHEA is involved in preserving cortical plasticity. Further, some, though not all, studies show that DHEA administration may lead to improvements in working memory in adults. Yet these findings remain limited by an incomplete understanding of the specific neuroanatomical mechanisms through which DHEA may impact the CNS during development. Here we examined associations between DHEA, cortico-hippocampal structural covariance, and working memory (216 participants [female=123], age range 6-22 years old, mean age: 13.6 +/-3.6 years, each followed for a maximum of 3 visits over the course of 4 years). In addition to administering performance-based, spatial working memory tests to these children, we also collected ecological, parent ratings of working memory in everyday situations. We found that increasingly higher DHEA levels were associated with a shift toward positive insular-hippocampal and occipito-hippocampal structural covariance. In turn, DHEA-related insular-hippocampal covariance was associated with lower spatial working memory but higher overall working memory as measured by the ecological parent ratings. Taken together with previous research, these results support the hypothesis that DHEA may optimize cortical functions related to general attentional and working memory processes, but impair the development of bottom-up, hippocampal-to-cortical connections, resulting in impaired encoding of spatial cues. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Use of Dreams in Psychotherapy

PubMed Central

Schredl, Michael; Bohusch, Claudia; Kahl, Johanna; Mader, Andrea; Somesan, Alexandra

2000-01-01

Since the publication of Sigmund Freud's The Interpretation of Dreams, dream interpretation has been a standard technique often used in psychotherapy. However, empirical studies about the frequency of working on dreams in therapy are lacking. The present study elicited, via a self-developed questionnaire, various aspects of work on dreams applied by psychotherapists in private practice. The findings indicate that dreams were often used in therapy, especially in psychoanalysis. In addition, a significant relationship was found between the frequency of the therapists' working on their own dreams and frequency of work on dreams in therapy. Because work on dreams was rated as beneficial for the clients, further studies investigating the effectiveness and the process of working on dreams will be of interest. PMID:10793127

EARLY ENTRANCE COPRODUCTION PLANT

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Storm; Govanon Nongbri; Steve Decanio

2004-01-12

The overall objective of this project is the three phase development of an Early Entrance Coproduction Plant (EECP) which uses petroleum coke to produce at least one product from at least two of the following three categories: (1) electric power (or heat), (2) fuels, and (3) chemicals using ChevronTexaco's proprietary gasification technology. The objective of Phase I is to determine the feasibility and define the concept for the EECP located at a specific site; develop a Research, Development, and Testing (RD&T) Plan to mitigate technical risks and barriers; and prepare a Preliminary Project Financing Plan. The objective of Phase IImore » is to implement the work as outlined in the Phase I RD&T Plan to enhance the development and commercial acceptance of coproduction technology. The objective of Phase III is to develop an engineering design package and a financing and testing plan for an EECP located at a specific site. The project's intended result is to provide the necessary technical, economic, and environmental information needed by industry to move the EECP forward to detailed design, construction, and operation. The partners in this project are Texaco Energy Systems LLC or TES (a subsidiary of ChevronTexaco), General Electric (GE), Praxair, and Kellogg Brown & Root (KBR) in addition to the U.S. Department of Energy (DOE). TES is providing gasification technology and Fischer-Tropsch (F-T) technology developed by Rentech, Inc., GE is providing combustion turbine technology, Praxair is providing air separation technology, and KBR is providing engineering. During Phase I, a design basis for the Fischer-Tropsch Synthesis section was developed based on limited experience with the specified feed gas and operating conditions. The objective of this Task in Phase II RD&T work was to confirm the performance of the F-T reactor at the set design conditions. Although much of the research, development, and testing work were done by TES outside of this project, several important issues were addressed in this phase of the project. They included Rejuvenation/Regeneration of the Fischer-Tropsch Catalyst, online Catalyst Withdrawal and Addition from the synthesis reactor, and the Fischer-Tropsch Design Basis Confirmation. In Phase III the results from these RD&T work will be incorporated in developing the engineering design package. This Topical Report documents the Phase II RD&T work that was completed for this task.« less

Leadership: current theories, research, and future directions.

PubMed

Avolio, Bruce J; Walumbwa, Fred O; Weber, Todd J

2009-01-01

This review examines recent theoretical and empirical developments in the leadership literature, beginning with topics that are currently receiving attention in terms of research, theory, and practice. We begin by examining authentic leadership and its development, followed by work that takes a cognitive science approach. We then examine new-genre leadership theories, complexity leadership, and leadership that is shared, collective, or distributed. We examine the role of relationships through our review of leader member exchange and the emerging work on followership. Finally, we examine work that has been done on substitutes for leadership, servant leadership, spirituality and leadership, cross-cultural leadership, and e-leadership. This structure has the benefit of creating a future focus as well as providing an interesting way to examine the development of the field. Each section ends with an identification of issues to be addressed in the future, in addition to the overall integration of the literature we provide at the end of the article.

The Impact of Collaborative Reflections on Teachers' Inquiry Teaching

NASA Astrophysics Data System (ADS)

Lin, Huann-shyang; Hong, Zuway-R.; Yang, Kuay-keng; Lee, Sung-Tao

2013-12-01

This study investigates the impact of collaborative reflections on teachers' inquiry teaching practices and identifies supportive actions relating to their professional development. Three science teachers in the same elementary school worked as a cooperative and collaborative group. They attended workshops and worked collaboratively through observing colleagues' teaching practices and discussing with university professors about their own inquiry teaching. The pre- and post-treatment classroom observations and comparisons of their teaching reveal that the three teachers were more focussed on asking inquiry-oriented questions in the post-treatment teaching. With additional qualitative data analysis, this study identified supportive resources of professional development. Workshop training sessions and sample unit served as the initiative agent in the beginning stage. Discussions with peers and reflective observation of peer teaching acted as a facilitative agent. Finally, student responses and researchers' on-site visit comments worked as a catalytic agent for their professional development.

A Time-Sensitive Framework for Including Geographic Information Systems (GIS) in Professional Development Activities for Classroom Teachers

ERIC Educational Resources Information Center

Millsaps, Lisa Tabor; Harrington, John A., Jr.

2017-01-01

This work shares a time-sensitive framework for teaching GIS to educators of all levels and disciplines. Existing relationships with teachers enabled the addition of GIS content in professional development activities. The amount of time devoted to GIS-related content varied depending on time made available for interaction with the audience.…

Handbook for Implementing Agile in Department of Defense Information Technology Acquisition

DTIC Science & Technology

2010-12-15

Wire-frame Mockup of iTunes Cover Flow Feature (source: http://www.balsamiq.com/products/mockups/examples#mytunez...programming. The JOPES customer was included early in the development process in order to understand requirements management (story cards ), observe...transition by teaching the new members Agile processes, such as story card development, refactoring, and pair programming. Additionally, the team worked to

Cognitive Sensitivity in Sibling Interactions: Development of the Construct and Comparison of Two Coding Methodologies

ERIC Educational Resources Information Center

Prime, Heather; Perlman, Michal; Tackett, Jennifer L.; Jenkins, Jennifer M.

2014-01-01

Research Findings: The goal of this study was to develop a construct of sibling cognitive sensitivity, which describes the extent to which children take their siblings' knowledge and cognitive abilities into account when working toward a joint goal. In addition, the study compared 2 coding methodologies for measuring the construct: a thin…

Thomas Midgley, Jr., and the Development of New Substances: A Case Study for Chemical Educators

ERIC Educational Resources Information Center

Viana, Hélio Elael Bonini; Porto, Paulo Alves

2013-01-01

This paper presents a history of chemistry case study focusing on selected aspects of the work of American engineer Thomas Midgley, Jr. (1889-1944): the development of tetraethyl lead as an antiknock gasoline additive and of chlorofluorocarbons (CFCs) as fluids for refrigeration devices. One general aim of this case study is to display the complex…

What Do Students Think about Group Work in Business Education? An Investigation into the Benefits, Challenges, and Student-Suggested Solutions

ERIC Educational Resources Information Center

Lee, Seung Hwan Mark; Smith, Donna; Sergueeva, Ksenia

2016-01-01

The authors sought to gain insight on how students view group learning and development as part of their business education experience. Specifically, the authors categorize benefits and challenges using S. A. Wheelan's (2005) integrated model of group development. Additionally, they investigate (from the students' perspective) best practices that…

Scientific Support for NQR Explosive Detection Development

DTIC Science & Technology

2006-07-01

Final 3. DATES COVERED (From - To) 8 March 2004 - 7 March 2006 4. TITLE AND SUBTITLE Scientific Support for NQR Explosive Detection Development...Laboratory (NRL) to improve explosive detection using nuclear quadrupole resonance ( NQR ) is summarized. The work includes studies of the effects...superconducting coils for explosive detection. Additional studies involving slowly rotating NQR measurements were also pursued. 15. SUBJECT TERMS Nuclear

Gas Atomization Equipment Statement of Work and Specification for Engineering design, Fabrication, Testing, and Installation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boutaleb, T.; Pluschkell, T. P.

The Gas Atomization Equipment will be used to fabricate metallic powder suitable for Powder Bed Fusion additive Manufacturing material to support Lawrence Livermore National Laboratory (LLNL) research and development. The project will modernize our capabilities to develop spherical reactive, refractory, and radioactive powders in the 10-75 μm diameter size range at LLNL.

Professional Development in Teacher Digital Competence and Improving School Quality from the Teachers' Perspective: A Case Study

ERIC Educational Resources Information Center

Cervera, Mercè Gisbert; Cantabrana, José L. Lázaro

2015-01-01

Professional development in ICT for teachers, in addition to being necessary given the dynamic nature of technology, also improves the institutional quality of schools. This work, based on action research, provides evidence that the school itself is capable of organising and designing a training plan as part of a broader process to improve quality…

Development of Pistachio (Pistacia vera L.) spread.

PubMed

Shakerardekani, Ahmad; Karim, Roselina; Ghazali, Hasanah Mohd; Chin, Nyuk Ling

2013-03-01

Pistachio nut (Pistacia vera L.) is one of the most delicious and nutritious nuts in the world. Pistachio spreads were developed using pistachio paste as the main component, icing sugar, soy protein isolate (SPI), and red palm oil (RPO), at different ratios. The highest mean scores of all the sensory attributes were depicted by spreads that were made without addition of SPI. It was found that the work of shear was 0 to 11.0 kg s for an acceptable spread. Sensory spreadability, overall texture, spreadability, and overall acceptability were negatively correlated (R > 0.83) with the work of shear of spreads. The findings indicated that the presence of RPO had a direct effect on the viscoelastic behavior of the pistachio spreads. The a values, which are related to the green color of the pistachio product ranged from 1.7 to 3.9 for spread without addition of RPO, and 4.0 to 5.3 in the presence of RPO. The development of pistachio spread would potentially increase the food uses of pistachio and introduce consumers with a healthier snack food. © 2013 Institute of Food Technologists®

3D Flow visualization in virtual reality

NASA Astrophysics Data System (ADS)

Pietraszewski, Noah; Dhillon, Ranbir; Green, Melissa

2017-11-01

By viewing fluid dynamic isosurfaces in virtual reality (VR), many of the issues associated with the rendering of three-dimensional objects on a two-dimensional screen can be addressed. In addition, viewing a variety of unsteady 3D data sets in VR opens up novel opportunities for education and community outreach. In this work, the vortex wake of a bio-inspired pitching panel was visualized using a three-dimensional structural model of Q-criterion isosurfaces rendered in virtual reality using the HTC Vive. Utilizing the Unity cross-platform gaming engine, a program was developed to allow the user to control and change this model's position and orientation in three-dimensional space. In addition to controlling the model's position and orientation, the user can ``scroll'' forward and backward in time to analyze the formation and shedding of vortices in the wake. Finally, the user can toggle between different quantities, while keeping the time step constant, to analyze flow parameter relationships at specific times during flow development. The information, data, or work presented herein was funded in part by an award from NYS Department of Economic Development (DED) through the Syracuse Center of Excellence.

Summary of the NICHD-BPCA Pediatric Formulation Initiatives Workshop-Pediatric Biopharmaceutics Classification System (PBCS) Working Group

PubMed Central

Abdel-Rahman, Susan; Amidon, Gordon L.; Kaul, Ajay; Lukacova, Viera; Vinks, Alexander A.; Knipp, Gregory

2012-01-01

The Biopharmaceutics Classification System (BCS) allows compounds to be classified based on their in vitro solubility and intestinal permeability. The BCS has found widespread use in the pharmaceutical community as an enabling guide for the rational selection of compounds, formulation for clinical advancement and generic biowaivers. The Pediatric Biopharmaceutics Classification System (PBCS) working group was convened to consider the possibility of developing an analogous pediatric based classification system. Since there are distinct developmental differences that can alter intestinal contents, volumes, permeability and potentially biorelevant solubilities at the different ages, the PBCS working group focused on identifying age specific issues that would need to be considered in establishing a flexible, yet rigorous PBCS. Objective To summarize the findings of the PBCS working group and provide insights into considerations required for the development of a pediatric based biopharmaceutics classification system. Methods Through several meetings conducted both at The Eunice Kennedy Shriver National Institute of Child Health, Human Development (NICHD)-US Pediatric Formulation Initiative (PFI) workshop (November 2011) and via teleconferences, the PBCS working group considered several high level questions that were raised to frame the classification system. In addition, the PBCS working group identified a number of knowledge gaps that would need to be addressed in order to develop a rigorous PBCS. Results It was determined that for a PBCS to be truly meaningful, it would need to be broken down into several different age groups that would account for developmental changes in intestinal permeability, luminal contents, and gastrointestinal transit. Several critical knowledge gaps where identified including: 1) a lack of fully understanding the ontogeny of drug metabolizing enzymes and transporters along the gastrointestinal (GI) tract, in the liver and in the kidney; 2) an incomplete understanding of age-based changes in the GI, liver and kidney physiology; 3) a clear need to better understand age-based intestinal permeability and fraction absorbed required to develop the PBCS; 4) a clear need for the development and organization of pediatric tissue biobanks to serve as a source for ontogenic research; and 5) a lack of literature published in age-based pediatric pharmacokinetics in order to build Physiologically- and Population-Based Pharmacokinetic (PBPK) databases. Conclusions To begin the process of establishing a PBPK model, ten pediatric therapeutic agents were selected (based on their adult BCS classifications). Those agents should be targeted for additional research in the future. The PBCS working group also identified several areas where a greater emphasis on research is needed to enable the development of a PBCS. PMID:23149009

Learning at work: competence development or competence-stress.

PubMed

Paulsson, Katarina; Ivergård, Toni; Hunt, Brian

2005-03-01

Changes in work and the ways in which it is carried out bring a need for upgrading workplace knowledge, skills and competencies. In today's workplaces, and for a number of reasons, workloads are higher than ever and stress is a growing concern (Health Risk Soc. 2(2) (2000) 173; Educat. Psychol. Meas. 61(5) (2001) 866). Increased demand for learning brings a risk that this will be an additional stress factor and thus a risk to health. Our research study is based on the control-demand-support model of Karasek and Theorell (Health Work: Stress, Productivity and the Reconstruction of Working Life, Basic Books/Harper, New York, 1990). We have used this model for our own empirical research with the aim to evaluate the model in the modern workplace. Our research enables us to expand the model in the light of current workplace conditions-especially those relating to learning. We report empirical data from a questionnaire survey of working conditions in two different branches of industry. We are able to define differences between companies in terms of working conditions and competence development. We describe and discuss the effects these conditions have on workplace competence development. Our research results show that increased workers' control of the learning process makes competence development more stimulating, is likely to simplify the work and reduces (learning-related) stress. It is therefore important that learning at work allows employees to control their learning and also allows time for the process of learning and reflection.

Development of a Hospital-based Massage Therapy Course at an Academic Medical Center.

PubMed

Dion, Liza J; Cutshall, Susanne M; Rodgers, Nancy J; Hauschulz, Jennifer L; Dreyer, Nikol E; Thomley, Barbara S; Bauer, Brent

2015-03-01

Massage therapy is offered increasingly in US medical facilities. Although the United States has many massage schools, their education differs, along with licensure and standards. As massage therapy in hospitals expands and proves its value, massage therapists need increased training and skills in working with patients who have various complex medical concerns, to provide safe and effective treatment. These services for hospitalized patients can impact patient experience substantially and provide additional treatment options for pain and anxiety, among other symptoms. The present article summarizes the initial development and description of a hospital-based massage therapy course at a Midwest medical center. A hospital-based massage therapy course was developed on the basis of clinical experience and knowledge from massage therapists working in the complex medical environment. This massage therapy course had three components in its educational experience: online learning, classroom study, and a 25-hr shadowing experience. The in-classroom study portion included an entire day in the simulation center. The hospital-based massage therapy course addressed the educational needs of therapists transitioning to work with interdisciplinary medical teams and with patients who have complicated medical conditions. Feedback from students in the course indicated key learning opportunities and additional content that are needed to address the knowledge and skills necessary when providing massage therapy in a complex medical environment. The complexity of care in medical settings is increasing while the length of hospital stay is decreasing. For this reason, massage provided in the hospital requires more specialized training to work in these environments. This course provides an example initial step in how to address some of the educational needs of therapists who are transitioning to working in the complex medical environment.

Development of a Hospital-based Massage Therapy Course at an Academic Medical Center

PubMed Central

Dion, Liza J.; Cutshall, Susanne M.; Rodgers, Nancy J.; Hauschulz, Jennifer L.; Dreyer, Nikol E.; Thomley, Barbara S.; Bauer, Brent

2015-01-01

Background: Massage therapy is offered increasingly in US medical facilities. Although the United States has many massage schools, their education differs, along with licensure and standards. As massage therapy in hospitals expands and proves its value, massage therapists need increased training and skills in working with patients who have various complex medical concerns, to provide safe and effective treatment. These services for hospitalized patients can impact patient experience substantially and provide additional treatment options for pain and anxiety, among other symptoms. The present article summarizes the initial development and description of a hospital-based massage therapy course at a Midwest medical center. Methods: A hospital-based massage therapy course was developed on the basis of clinical experience and knowledge from massage therapists working in the complex medical environment. This massage therapy course had three components in its educational experience: online learning, classroom study, and a 25-hr shadowing experience. The in-classroom study portion included an entire day in the simulation center. Results: The hospital-based massage therapy course addressed the educational needs of therapists transitioning to work with interdisciplinary medical teams and with patients who have complicated medical conditions. Feedback from students in the course indicated key learning opportunities and additional content that are needed to address the knowledge and skills necessary when providing massage therapy in a complex medical environment. Conclusions: The complexity of care in medical settings is increasing while the length of hospital stay is decreasing. For this reason, massage provided in the hospital requires more specialized training to work in these environments. This course provides an example initial step in how to address some of the educational needs of therapists who are transitioning to working in the complex medical environment. PMID:25780472

Obesity and shift work: chronobiological aspects.

PubMed

Antunes, L C; Levandovski, R; Dantas, G; Caumo, W; Hidalgo, M P

2010-06-01

The present review has the objective of summarising chronobiological aspects of shift work and obesity. There was a systematic search in PubMed databases, using the following descriptors: shift work; obesity; biological clock. Shift work is extremely frequent in several services and industries, in order to systematise the needs for flexibility of the workforce, necessary to optimise productivity and business competitiveness. In developing countries, this population represents a considerable contingent workforce. Recently, studies showed that overweight and obesity are more prevalent in shift workers than day workers. In addition, the literature shows that shift workers seem to gain weight more often than those workers submitted to a usual work day. In conclusion, there is considerable epidemiological evidence that shift work is associated with increased risk for obesity, diabetes and CVD, perhaps as a result of physiological maladaptation to chronically sleeping and eating at abnormal circadian times. The impact of shift work on metabolism supports a possible pathway to the development of obesity and its co-morbities. The present review demonstrated the adverse cardiometabolic implications of circadian misalignment, as occurs chronically with shift workers.

Portage in the UK: recent developments.

PubMed

Russell, F

2007-11-01

Portage provides home-based, early intervention and support to families who have a young child with additional needs. Working in the context of the Every Child Matters agenda, the National Portage Association (NPA) aims to develop inclusive, high-quality provision. This paper reviews their recent work, presents a summary of the findings of a national survey of Portage and discusses their implications. All Portage services known to the NPA and local authorities in England were asked to complete a questionnaire and forward another to families using early years' services to evaluate the support they receive. The survey identified the extent and gaps in Portage provision and the level of unmet need. Families who contributed said they valued Portage because it helped their child and provided support for the whole family. DISCUSSION OF FINDINGS: The survey identified 31 local authorities in England, where Portage is not available. Geographical gaps were most notable in the North East and West Midlands regions. Despite a small increase in the extent of Portage provision, it is estimated that services only meet the needs of a small proportion of families that are eligible. Current work may help overcome geographical gaps through supporting the development of high-quality Portage services but, in endeavouring to meet the needs of families waiting for Portage, it is important not to diminish the quality of support already provided. Portage aims to provide flexible support for families to respond to their individual needs. Evaluating its effectiveness is problematic because of its complex nature but this survey provided an opportunity for families to share their views at a national level. Continued development work can help Portage provision become more accessible and one of the options routinely available to families who have a young child with additional needs.

Darton College Customized Nursing Program for the Fort Benning Community and Research Project

DTIC Science & Technology

2012-10-01

faculty members find or design some additional resources, they are making them available on the Mentoring website. • Netbook /laptop versions of...Anatomy and Physiology I and II and the Medical Terminology course development for laptop and netbook platforms, as specified in the Statement of Work...on the laptop or netbooks ; when internet access is available, assessments are submitted. The faculty completed their portion of the work and design

States, Earth Science, and Decision-Making: Five Years of Lessons Learned by the NASA DEVELOP National Program Working with a State Government

NASA Astrophysics Data System (ADS)

Favors, J.; Ruiz, M. L.; Rogers, L.; Ross, K. W.; Childs-Gleason, L. M.; Allsbrook, K. N.

2017-12-01

Over a five-year period that spanned two administrations, NASA's DEVELOP National Program engaged in a partnership with the Government of the Commonwealth of Virginia to explore the use of Earth observations in state-level decision making. The partnership conducted multiple applied remote sensing projects with DEVELOP and utilized a shared-space approach, where the Virginia Governor's Office hosted NASA DEVELOP participants to mature the partnership and explore additional science opportunities in the Commonwealth. This presentation will provide an overview of various lessons learned from working in an administrative and policy environment, fostering the use of science in such an environment, and building substantive relationships with non-technical partners. An overview of the projects conducted in this partnership will provide an opportunity to explore specific best practices that enhanced the work and provide tips to enhance the potential for success for other science and technology organizations considering similar partnerships.

America Makes: The National Additive Manufacturing Innovation Institute (NAMII) Status Report and Future Opportunities (Postprint)

DTIC Science & Technology

2014-09-01

manufacturing, direct part manufacturing, manufacturing institute, public- private partnership, rapid manufacturing, 3D printing 16. SECURITY CLASSIFICATION...Manufacturing Science and Technology Pro- gram and selected Additive Manufacturing (or more popularly known as 3D printing ) as the technical subject. Working...operations, America Makes is starting to hit its stride in developing technology for 3D printing and in leading the way in how the United States should

Organizational practices, work demands and the well-being of employees: a follow-up study in the metal industry and retail trade.

PubMed

Tuomi, Kaija; Vanhala, Sinikka; Nykyri, Erkki; Janhonen, Minna

2004-03-01

Rapid technological change and increased international competition have changed working life and work organizations. These changes may not be considered when researching employee work ability and well-being. This study investigates the impact of organizational practices, work demands and individual factors on work ability, organizational commitment and mental well-being of employees in the metal industry and retail trade. A follow-up study was conducted to examine these connections among 1389 employees (mean age 42 years at baseline) in 91 organizations. The first survey was conducted in 1998 and was repeated in 2000. Changes in organizational practices and the demands of work were strongly associated with changes in employee well-being. Work ability, organizational commitment and the mental well-being of employees were increased most if the opportunities for development and influence and the promotion of employee well-being were increased and if the supervisory support and organization of work were improved. Well-being also improved with less uncertainty at work and with decreasing mental and physical work demands. In addition physical exercise and affluence also had favourable effects. The results confirm that several features of organizational practices are strongly associated with employees' well-being. Organizational development is an important method of improving employees' work ability, commitment and well-being.

Fabrication of Thermoelectric Devices Using Additive-Subtractive Manufacturing Techniques: Application to Waste-Heat Energy Harvesting

NASA Astrophysics Data System (ADS)

Tewolde, Mahder

Thermoelectric generators (TEGs) are solid-state devices that convert heat directly into electricity. They are well suited for waste-heat energy harvesting applications as opposed to primary energy generation. Commercially available thermoelectric modules are flat, inflexible and have limited sizes available. State-of-art manufacturing of TEG devices relies on assembling prefabricated parts with soldering, epoxy bonding, and mechanical clamping. Furthermore, efforts to incorporate them onto curved surfaces such as exhaust pipes, pump housings, steam lines, mixing containers, reaction chambers, etc. require custom-built heat exchangers. This is costly and labor-intensive, in addition to presenting challenges in terms of space, thermal coupling, added weight and long-term reliability. Additive manufacturing technologies are beginning to address many of these issues by reducing part count in complex designs and the elimination of sub-assembly requirements. This work investigates the feasibility of utilizing such novel manufacturing routes for improving the manufacturing process of thermoelectric devices. Much of the research in thermoelectricity is primarily focused on improving thermoelectric material properties by developing of novel materials or finding ways to improve existing ones. Secondary to material development is improving the manufacturing process of TEGs to provide significant cost benefits. To improve the device fabrication process, this work explores additive manufacturing technologies to provide an integrated and scalable approach for TE device manufacturing directly onto engineering component surfaces. Additive manufacturing techniques like thermal spray and ink-dispenser printing are developed with the aim of improving the manufacturing process of TEGs. Subtractive manufacturing techniques like laser micromachining are also studied in detail. This includes the laser processing parameters for cutting the thermal spray materials efficiently by optimizing cutting speed and power while maintaining surface quality and interface properties. Key parameters are obtained from these experiments and used to develop a process that can be used to fabricate a working TEG directly onto the waste-heat component surface. A TEG module has been fabricated for the first time entirely by using thermal spray technology and laser micromachining. The target applications include automotive exhaust systems and other high-volume industrial waste heat sources. The application of TEGs for thermoelectrically powered sensors for Small Modular Reactors (SMRs) is presented. In conclusion, more ways to improve the fabrication process of TEGs are suggested.

Augmenting an observation network to facilitate flow and transport model discrimination.

USDA-ARS?s Scientific Manuscript database

Improving understanding of subsurface conditions includes performance comparison for competing models, independently developed or obtained via model abstraction. The model comparison and discrimination can be improved if additional observations will be included. The objective of this work was to i...

Diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams

PubMed Central

2015-01-01

Summary The conjugate addition reaction has been a useful tool in the formation of carbon–carbon bonds. The utility of this reaction has been demonstrated in the synthesis of many natural products, materials, and pharmacological agents. In the last three decades, there has been a significant increase in the development of asymmetric variants of this reaction. Unfortunately, conjugate addition reactions using α,β-unsaturated amides and lactams remain underdeveloped due to their inherently low reactivity. This review highlights the work that has been done on both diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams. PMID:25977728

Investigation of charge coupled device correlation techniques

NASA Technical Reports Server (NTRS)

Lampe, D. R.; Lin, H. C.; Shutt, T. J.

1978-01-01

Analog Charge Transfer Devices (CTD's) offer unique advantages to signal processing systems, which often have large development costs, making it desirable to define those devices which can be developed for general system's use. Such devices are best identified and developed early to give system's designers some interchangeable subsystem blocks, not requiring additional individual development for each new signal processing system. The objective of this work is to describe a discrete analog signal processing device with a reasonably broad system use and to implement its design, fabrication, and testing.

Development, testing, and certification of the Northrup, Inc., ML series concentrating solar collector model NSC-01-0732

NASA Technical Reports Server (NTRS)

Parker, J. C.

1979-01-01

A summary is presented of the additional development work on the existing ML Series concentrating solar collector for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the development hardware, lists deliverable end items, deals with problems encountered during fabrication and testing, and includes certification statements of performance. This report shows that the products developed are marketable and suitable for public use.

Orion Multi-Purpose Crew Vehicle Active Thermal Control and Environmental Control and Life Support Development Status

NASA Technical Reports Server (NTRS)

Lewis, John F.; Barido, Richard A.; Boehm, Paul; Cross, Cynthia D.; Rains, George Edward

2014-01-01

The Orion Multi Purpose Crew Vehicle (MPCV) is the first crew transport vehicle to be developed by the National Aeronautics and Space Administration (NASA) in the last thirty years. Orion is currently being developed to transport the crew safely beyond Earth orbit. This year, the vehicle focused on building the Exploration Flight Test 1 (EFT1) vehicle to be launched in September of 2014. The development of the Orion Active Thermal Control (ATCS) and Environmental Control and Life Support (ECLS) System, focused on the integrating the components into the EFT1 vehicle and preparing them for launch. Work also has started on preliminary design reviews for the manned vehicle. Additional development work is underway to keep the remaining component progressing towards implementation on the flight tests of EM1 in 2017 and of EM2 in 2020. This paper covers the Orion ECLS development from April 2013 to April 2014.

Multi Purpose Crew Vehicle Active Thermal Control and Environmental Control and Life Support Development Status

NASA Technical Reports Server (NTRS)

Lewis, John F.; Barido, Richard A.; Boehm, Paul; Cross, Cynthia D.; Rains, George Edward

2014-01-01

The Orion Multi Purpose Crew Vehicle (MPCV) is the first crew transport vehicle to be developed by the National Aeronautics and Space Administration (NASA) in the last thirty years. Orion is currently being developed to transport the crew safely beyond Earth orbit. This year, the vehicle focused on building the Exploration Flight Test 1 (EFT1) vehicle to be launched in September of 2014. The development of the Orion Active Thermal Control (ATCS) and Environmental Control and Life Support (ECLS) System, focused on the integrating the components into the EFT1 vehicle and preparing them for launch. Work also has started on preliminary design reviews for the manned vehicle. Additional development work is underway to keep the remaining component progressing towards implementation on the flight tests of EM1 in 2017 and of EM2 in 2020. This paper covers the Orion ECLS development from April 2013 to April 2014

Innovative Ideas on How Work-Family Research Can Have More Impact.

PubMed

Kossek, Ellen Ernst; Baltes, Boris B; Matthews, Russell A

2011-09-01

The commentaries on our focal article agreed with its main premise that work-family research should follow new strategies to improve its practical impact, and made suggestions clustering into three main themes. The first theme built on our suggestion to improve the research focus, terminology, and framing of work-family research. These essays offered additional ideas such as decoupling work-family from work-life research, and examining contextual factors more deeply. The second theme focused on how to better apply the findings from work family research. These commentaries provided social change approaches for making work-family issues more central to key stakeholders and to organizations. The third theme focused on broadening our scope to the societal level. These editorials advocated tactics supporting the development of basic rights of work-life balance within and across nations.

Shape Memory Polyurethane Materials Containing Ferromagnetic Iron Oxide and Graphene Nanoplatelets

PubMed Central

Urban, Magdalena

2017-01-01

Intelligent materials, such as memory shape polymers, have attracted considerable attention due to wide range of possible applications. Currently, intensive research is underway, in matters of obtaining memory shape materials that can be actuated via inductive methods, for example with help of magnetic field. In this work, an attempt was made to develop a new polymer composite—polyurethane modified with graphene nanoplates and ferromagnetic iron oxides—with improved mechanical properties and introduced magnetic and memory shape properties. Based on the conducted literature review, gathered data were compared to the results of similar materials. Obtained materials were tested for their thermal, rheological, mechanical and shape memory properties. Structure of both fillers and composites were also analyzed using various spectroscopic methods. The addition of fillers to the polyurethane matrix improved the mechanical and shape memory properties, without having a noticeable impact on thermal properties. As it was expected, the high content of fillers caused a significant change in viscosity of filled prepolymers (during the synthesis stage). Each of the studied composites showed better mechanical properties than the unmodified polyurethanes. The addition of magnetic particles introduced additional properties to the composite, which could significantly expand the functionality of the materials developed in this work. PMID:28906445

Shape Memory Polyurethane Materials Containing Ferromagnetic Iron Oxide and Graphene Nanoplatelets.

PubMed

Urban, Magdalena; Strankowski, Michał

2017-09-14

Intelligent materials, such as memory shape polymers, have attracted considerable attention due to wide range of possible applications. Currently, intensive research is underway, in matters of obtaining memory shape materials that can be actuated via inductive methods, for example with help of magnetic field. In this work, an attempt was made to develop a new polymer composite-polyurethane modified with graphene nanoplates and ferromagnetic iron oxides-with improved mechanical properties and introduced magnetic and memory shape properties. Based on the conducted literature review, gathered data were compared to the results of similar materials. Obtained materials were tested for their thermal, rheological, mechanical and shape memory properties. Structure of both fillers and composites were also analyzed using various spectroscopic methods. The addition of fillers to the polyurethane matrix improved the mechanical and shape memory properties, without having a noticeable impact on thermal properties. As it was expected, the high content of fillers caused a significant change in viscosity of filled prepolymers (during the synthesis stage). Each of the studied composites showed better mechanical properties than the unmodified polyurethanes. The addition of magnetic particles introduced additional properties to the composite, which could significantly expand the functionality of the materials developed in this work.

46 CFR 97.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 97.34-25 Section 97.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to...

46 CFR 196.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 196.34-25 Section 196.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition...

46 CFR 196.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 196.34-25 Section 196.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition...

46 CFR 196.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 196.34-25 Section 196.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition...

46 CFR 97.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 97.34-25 Section 97.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to...

46 CFR 78.36-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 78.36-25 Section 78.36-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other...

46 CFR 196.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 196.34-25 Section 196.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition...

46 CFR 78.36-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 78.36-25 Section 78.36-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other...

46 CFR 97.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 97.34-25 Section 97.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to...

46 CFR 78.36-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 78.36-25 Section 78.36-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other...

46 CFR 196.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 196.34-25 Section 196.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS OPERATIONS Work Vests § 196.34-25 Additional requirements for hybrid work vests. (a) In addition...

46 CFR 97.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 97.34-25 Section 97.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to...

46 CFR 78.36-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 78.36-25 Section 78.36-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other...

46 CFR 78.36-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 78.36-25 Section 78.36-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Work Vests § 78.36-25 Additional requirements for hybrid work vests. (a) In addition to the other...

46 CFR 97.34-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 97.34-25 Section 97.34-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS OPERATIONS Work Vests § 97.34-25 Additional requirements for hybrid work vests. (a) In addition to...

The development of the Project NetWork administrative records database for policy evaluation.

PubMed

Rupp, K; Driessen, D; Kornfeld, R; Wood, M

1999-01-01

This article describes the development of SSA's administrative records database for the Project NetWork return-to-work experiment targeting persons with disabilities. The article is part of a series of papers on the evaluation of the Project NetWork demonstration. In addition to 8,248 Project NetWork participants randomly assigned to receive case management services and a control group, the simulation identified 138,613 eligible nonparticipants in the demonstration areas. The output data files contain detailed monthly information on Supplemental Security Income (SSI) and Disability Insurance (DI) benefits, annual earnings, and a set of demographic and diagnostic variables. The data allow for the measurement of net outcomes and the analysis of factors affecting participation. The results suggest that it is feasible to simulate complex eligibility rules using administrative records, and create a clean and edited data file for a comprehensive and credible evaluation. The study shows that it is feasible to use administrative records data for selecting control or comparison groups in future demonstration evaluations.

Integrated Thermal Protection Systems and Heat Resistant Structures

NASA Technical Reports Server (NTRS)

Pichon, Thierry; Lacoste, Marc; Glass, David E.

2006-01-01

In the early stages of NASA's Exploration Initiative, Snecma Propulsion Solide was funded under the Exploration Systems Research & Technology program to develop integrated thermal protection systems and heat resistant structures for reentry vehicles. Due to changes within NASA's Exploration Initiative, this task was cancelled early. This presentation provides an overview of the work that was accomplished prior to cancellation. The Snecma team chose an Apollo-type capsule as the reference vehicle for the work. They began with the design of a ceramic aft heatshield (CAS) utilizing C/SiC panels as the capsule heatshield, a C/SiC deployable decelerator and several ablators. They additionally developed a health monitoring system, high temperature structures testing, and the insulation characterization. Though the task was pre-maturely cancelled, a significant quantity of work was accomplished.

Non-invasive current and voltage imaging techniques for integrated circuits using scanning probe microscopy. Final report, LDRD Project FY93 and FY94

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, A.N.; Cole, E.I. Jr.; Tangyunyong, Paiboon

This report describes the first practical, non-invasive technique for detecting and imaging currents internal to operating integrated circuits (ICs). This technique is based on magnetic force microscopy and was developed under Sandia National Laboratories` LDRD (Laboratory Directed Research and Development) program during FY 93 and FY 94. LDRD funds were also used to explore a related technique, charge force microscopy, for voltage probing of ICs. This report describes the technical work performed under this LDRD as well as the outcomes of the project in terms of publications and awards, intellectual property and licensing, synergistic work, potential future work, hiring ofmore » additional permanent staff, and benefits to DOE`s defense programs (DP).« less

[Activities of Center for Nondestructive Evaluation, Iowa State University

NASA Technical Reports Server (NTRS)

Gray, Joe

2002-01-01

The final report of NASA funded activities at Iowa State University (ISU) for the period between 1/96 and 1/99 includes two main areas of activity. The first is the development and delivery of an x-ray simulation package suitable for evaluating the impact of parameters affects the inspectability of an assembly of parts. The second area was the development of images processing tools to remove reconstruction artifacts in x-ray laminagraphy images. The x-ray simulation portion of this work was done by J. Gray and the x-ray laminagraphy work was done by J. Basart. The report is divided into two sections covering the two activities respectively. In addition to this work reported the funding also covered NASA's membership in the NSF University/Industrial Cooperative Research Center.

Contribution to the physical-mechanical study of cement CRS basis of dune-sand powder and other minerals

NASA Astrophysics Data System (ADS)

Dahmani, Saci; Kriker, Abdelouahed

2016-07-01

The Portland cements are increasingly used for the manufacture of cement materials (mortar or concrete). Sighting the increasing demand of the cement in the field of construction, and the wealth of our country of minerals. It is time to value these local materials in construction materials and in the manufacture of cement for the manufacture of a new type of cement or for the improvement of the cement of characteristics for several reasons either technical, or ecological or economic or to improve certain properties to the State fees or hardened. The uses of mineral additions remain associated to disadvantages on the time of solidification and the development of the mechanical resistance at the young age [8]. The objective of our work is to study the effects of the incorporation of additions minerals such the pozzolan (active addition) [3], slag of blast furnace (active addition) [4] and the sand dune powder (inert addition) on the physico-mechanical properties of compositions of mortar collaborated compositions according to different binary combinations basis of these additions. This will allow selecting of optimal dosages of these combinations the more efficient, from the point of view of mechanical resistanceas well. The results of this research work confirm that the rate of 10% of pozzolan, slag or powder of dune sand contributes positively on the development of resistance in the long term, at of this proportion time,there is a decrease in the latter except for the slag (20 - 40%) [4]Seems the more effective resistors and physical properties.

Using a logic model to evaluate the Kids Together early education inclusion program for children with disabilities and additional needs.

PubMed

Clapham, Kathleen; Manning, Claire; Williams, Kathryn; O'Brien, Ginger; Sutherland, Margaret

2017-04-01

Despite clear evidence that learning and social opportunities for children with disabilities and special needs are more effective in inclusive not segregated settings, there are few known effective inclusion programs available to children with disabilities, their families or teachers in the early years within Australia. The Kids Together program was developed to support children with disabilities/additional needs aged 0-8 years attending mainstream early learning environments. Using a key worker transdisciplinary team model, the program aligns with the individualised package approach of the National Disability Insurance Scheme (NDIS). This paper reports on the use of a logic model to underpin the process, outcomes and impact evaluation of the Kids Together program. The research team worked across 15 Early Childhood Education and Care (ECEC) centres and in home and community settings. A realist evaluation using mixed methods was undertaken to understand what works, for whom and in what contexts. The development of a logic model provided a structured way to explore how the program was implemented and achieved short, medium and long term outcomes within a complex community setting. Kids Together was shown to be a highly effective and innovative model for supporting the inclusion of children with disabilities/additional needs in a range of environments central for early childhood learning and development. The use of a logic model provided a visual representation of the Kids Together model and its component parts and enabled a theory of change to be inferred, showing how a coordinated and collaborative approached can work across multiple environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Expertise Development With Different Types of Automation: A Function of Different Cognitive Abilities.

PubMed

Jipp, Meike

2016-02-01

I explored whether different cognitive abilities (information-processing ability, working-memory capacity) are needed for expertise development when different types of automation (information vs. decision automation) are employed. It is well documented that expertise development and the employment of automation lead to improved performance. Here, it is argued that a learner's ability to reason about an activity may be hindered by the employment of information automation. Additional feedback needs to be processed, thus increasing the load on working memory and decelerating expertise development. By contrast, the employment of decision automation may stimulate reasoning, increase the initial load on information-processing ability, and accelerate expertise development. Authors of past research have not investigated the interrelations between automation assistance, individual differences, and expertise development. Sixty-one naive learners controlled simulated air traffic with two types of automation: information automation and decision automation. Their performance was captured across 16 trials. Well-established tests were used to assess information-processing ability and working-memory capacity. As expected, learners' performance benefited from expertise development and decision automation. Furthermore, individual differences moderated the effect of the type of automation on expertise development: The employment of only information automation increased the load on working memory during later expertise development. The employment of decision automation initially increased the need to process information. These findings highlight the importance of considering individual differences and expertise development when investigating human-automation interaction. The results are relevant for selecting automation configurations for expertise development. © 2015, Human Factors and Ergonomics Society.

FY15 Status of Immersion Phased Array Ultrasonic Probe Development and Performance Demonstration Results for Under Sodium Viewing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diaz, Aaron A.; Larche, Michael R.; Mathews, Royce

2015-09-01

This Technical Letter Report (TLR) describes work conducted at the Pacific Northwest National Laboratory (PNNL) during FY 2015 on the under-sodium viewing (USV) PNNL project 58745, Work Package AT-15PN230102. This TLR satisfies PNNL’s M3AT-15PN2301027 milestone, and is focused on summarizing the design, development, and evaluation of a two-dimensional matrix phased-array probe referred to as serial number 3 (SN3). In addition, this TLR also provides the results from a performance demonstration of in-sodium target detection trials at 260°C using a one-dimensional 22-element linear array developed in FY14 and referred to as serial number 2 (SN2).

The development of coal-based technologies for Department of Defense facilities. Volume 1, Technical report. Semiannual technical progress report, September 28, 1994--March 27, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, B.G.; Bartley, D.A.; Hatcher, P.

1996-10-15

This program is being conducted as a cooperative agreement between the Consortium for Coal Water Mixture Technology and the U.S. Department of Energy. Activities this reporting period are summarized by phase. Phase I is nearly completed. During this reporting period, coal beneficiation/preparation studies, engineering designs and economics for retrofitting the Crane, Indiana boiler to fire coal-based fuels, and a 1,000-hour demonstration of dry, micronized coal were completed. In addition, a demonstration-scale micronized-coal water mixture (MCWM) preparation circuit was constructed and a 1,000-hour demonstration firing MCWM began. Work in Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analysesmore » of coal use. Emissions reductions investigations involved literature surveys of NO{sub x}, SO{sub 2}, trace metals, volatile organic compounds, and fine particulate matter capture. In addition, vendors and engineering firms were contacted to identify the appropriate emissions technologies for the installation of commercial NO{sub x} and SO{sub 2} removal systems on the demonstration boiler. Information from the literature surveys and engineering firms will be used to identify, design, and install a control system(s). Work continued on the refinement and optimization of coal grinding and MCWM preparation procedures, and on the development of advanced processes for beneficiating high ash, high sulfur coals. Work also continued on determining the basic cost estimation of boiler retrofits, and evaluating environmental, regulatory, and regional economic impacts. In addition, the feasibility of technology adoption, and the public`s perception of the benefits and costs of coal usage was studied. A coal market analysis was completed. Work in Phase III focused on coal preparation studies, emissions reductions and economic analyses of coal use.« less

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eitouni, Hany; Yang, Jin; Pratt, Russell

2014-09-29

The purpose of this project was for Seeo to develop a high energy lithium based technology with targets of over 500 Wh/l and 325 Wh/kg. Seeo would leverage the work already achieved with its unique proprietary solid polymer DryLyteTM technology in cells which had a specific energy density of 220 Wh/kg. The development work was focused on establishing a dual electrolyte system, coated cathode particle techniques, various types of additives, and different conductive salts. The program had a duration of three years, with Seeo delivering the final cells at the end of 2014 for evaluation by a DOE laboratory.

Ammonia Analysis by Gas Chromatograph/Infrared Detector (GC/IRD)

NASA Technical Reports Server (NTRS)

Scott, Joseph P.; Whitfield, Steve W.

2003-01-01

Methods are being developed at Marshall Space Flight Center's Toxicity Lab on a CG/IRD System that will be used to detect ammonia in low part per million (ppm) levels. These methods will allow analysis of gas samples by syringe injections. The GC is equipped with a unique cryogenic-cooled inlet system that will enable our lab to make large injections of a gas sample. Although the initial focus of the work will be analysis of ammonia, this instrument could identify other compounds on a molecular level. If proper methods can be developed, the IRD could work as a powerful addition to our offgassing capabilities.

[Estimation of the quality of life 8-year-old child with bilateral anophthalmia].

PubMed

Sredzińska-Kita, Dorota; Mrugacz, Małgorzata; Bakunowicz-Łazarczyk, Alina

2009-01-01

The main aim of our work was to estimate the physical and psychomotor development and the arrangement to the daily life for a 8-year-old girl with inborn bilateral anophthalmia. The basic ophthalmic, pediatric and neurological examinations were performed with additional genetic and radiological examinations. The ophthalmic and MRI examination find out the absence of the eyeballs, optic nerves, optic chiasm, optic tracts and optic radiation. Anophthalmia limits in a big grade an independent life of the child. However, currently the girl's development indicates for good intellectual abilities what is promising for future independent life and professional work.

A novel classification and online platform for planning and documentation of medical applications of additive manufacturing.

PubMed

Tuomi, Jukka; Paloheimo, Kaija-Stiina; Vehviläinen, Juho; Björkstrand, Roy; Salmi, Mika; Huotilainen, Eero; Kontio, Risto; Rouse, Stephen; Gibson, Ian; Mäkitie, Antti A

2014-12-01

Additive manufacturing technologies are widely used in industrial settings and now increasingly also in several areas of medicine. Various techniques and numerous types of materials are used for these applications. There is a clear need to unify and harmonize the patterns of their use worldwide. We present a 5-class system to aid planning of these applications and related scientific work as well as communication between various actors involved in this field. An online, matrix-based platform and a database were developed for planning and documentation of various solutions. This platform will help the medical community to structurally develop both research innovations and clinical applications of additive manufacturing. The online platform can be accessed through http://www.medicalam.info. © The Author(s) 2014.

Zero valent iron simultaneously enhances methane production and sulfate reduction in anaerobic granular sludge reactors.

PubMed

Liu, Yiwen; Zhang, Yaobin; Ni, Bing-Jie

2015-05-15

Zero valent iron (ZVI) packed anaerobic granular sludge reactors have been developed for improved anaerobic wastewater treatment. In this work, a mathematical model is developed to describe the enhanced methane production and sulfate reduction in anaerobic granular sludge reactors with the addition of ZVI. The model is successfully calibrated and validated using long-term experimental data sets from two independent ZVI-enhanced anaerobic granular sludge reactors with different operational conditions. The model satisfactorily describes the chemical oxygen demand (COD) removal, sulfate reduction and methane production data from both systems. Results show ZVI directly promotes propionate degradation and methanogenesis to enhance methane production. Simultaneously, ZVI alleviates the inhibition of un-dissociated H2S on acetogens, methanogens and sulfate reducing bacteria (SRB) through buffering pH (Fe(0) + 2H(+) = Fe(2+) + H2) and iron sulfide precipitation, which improve the sulfate reduction capacity, especially under deterioration conditions. In addition, the enhancement of ZVI on methane production and sulfate reduction occurs mainly at relatively low COD/ [Formula: see text] ratio (e.g., 2-4.5) rather than high COD/ [Formula: see text] ratio (e.g., 16.7) compared to the reactor without ZVI addition. The model proposed in this work is expected to provide support for further development of a more efficient ZVI-based anaerobic granular system. Copyright © 2015 Elsevier Ltd. All rights reserved.

Water resources of the Raft River basin, Idaho-Utah

USGS Publications Warehouse

Nace, Raymond L.; ,

1961-01-01

Much arable land in the Raft River basin of Idaho lacks water for irrigation, and the potentially irrigable acreage far exceeds the amount that could be irrigated with the estimated total supply of water. Therefore, the amount of uncommitted water that could be intercepted and used within the basin is the limiting factor in further development of its native water supply. Water for additional irrigation might be obtained by constructing surface-storage works, by pumping ground water, or by importing surface water. Additional groundwater development is feasible. As an aid to orderly development and use of the water supplies, the report summarizes available geologic and hydrologic data and, by analysis and interpretation, derives an estimate of the recoverable water yield of the basin.

A Collective Study on Modeling and Simulation of Resistive Random Access Memory

NASA Astrophysics Data System (ADS)

Panda, Debashis; Sahu, Paritosh Piyush; Tseng, Tseung Yuen

2018-01-01

In this work, we provide a comprehensive discussion on the various models proposed for the design and description of resistive random access memory (RRAM), being a nascent technology is heavily reliant on accurate models to develop efficient working designs and standardize its implementation across devices. This review provides detailed information regarding the various physical methodologies considered for developing models for RRAM devices. It covers all the important models reported till now and elucidates their features and limitations. Various additional effects and anomalies arising from memristive system have been addressed, and the solutions provided by the models to these problems have been shown as well. All the fundamental concepts of RRAM model development such as device operation, switching dynamics, and current-voltage relationships are covered in detail in this work. Popular models proposed by Chua, HP Labs, Yakopcic, TEAM, Stanford/ASU, Ielmini, Berco-Tseng, and many others have been compared and analyzed extensively on various parameters. The working and implementations of the window functions like Joglekar, Biolek, Prodromakis, etc. has been presented and compared as well. New well-defined modeling concepts have been discussed which increase the applicability and accuracy of the models. The use of these concepts brings forth several improvements in the existing models, which have been enumerated in this work. Following the template presented, highly accurate models would be developed which will vastly help future model developers and the modeling community.

FY2016 Update on ILAW Glass Testing for Disposal at IDF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, E. E.; Swanberg, D. J.; Muller, Isabelle S.

2017-04-12

This status report provides a FY2016 update on work performed to collect information on the corrosion behavior of LAW glasses to support the IDF PA. In addition to the development of the baseline operating envelope for the WTP, since 2003, VSL has developed a wide range of LAW formulations that achieve considerably higher waste loadings than the WTP baseline formulations.

New Design and Improvement of Planetary Gear Trains

NASA Technical Reports Server (NTRS)

Handschuh, Robert (Technical Monitor); Litvin, Faydor L.; Fuentes, Alfonso; Vecchiato, Daniele; Gonzalez-Perez, Ignacio

2004-01-01

The development of new types of planetary and planetary face-gear drives is proposed. The new designs are based on regulating backlash between the gears and modifying the tooth surfaces to improve the design. The goal of this work is to obtain a nearly uniform distribution of load between the planet gears. In addition, a new type of planetary face-gear drive was developed in this project.

Problem Solving for Better Health Nursing: a working approach to the development and dissemination of applied research in developing countries.

PubMed

Hoyt, Pamela

2006-05-01

This article describes the international component of the Problem Solving for Better Health Nursing (PSBHN) program initiated by the Dreyfus Health Foundation (DHF) in 2002. PSBHN is operational in 14 countries in addition to the United States. A PSBHN initiative is described, and attention is given to lessons learned and plans for the future.

Do Child Tax Benefits Affect the Wellbeing of Children? Evidence from Canadian Child Benefit Expansions. NBER Working Paper No. 14624

ERIC Educational Resources Information Center

Milligan, Kevin; Stabile, Mark

2008-01-01

A vast literature has examined the impact of family income on the health and development outcomes of children. One channel through which increased income may operate is an improvement in a family's ability to provide food, shelter, clothing, books, and other expenditure-related inputs to a child's development. In addition to this channel, many…

46 CFR 35.03-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 35.03-25 Section 35.03-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Work Vests § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in...

46 CFR 35.03-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 35.03-25 Section 35.03-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Work Vests § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in...

46 CFR 35.03-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 35.03-25 Section 35.03-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Work Vests § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in...

46 CFR 35.03-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 35.03-25 Section 35.03-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Work Vests § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in...

46 CFR 35.03-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 35.03-25 Section 35.03-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Work Vests § 35.03-25 Additional requirements for hybrid work vests. (a) In addition to the other requirements in...

Shift Work and Shift Work Sleep Disorder: Clinical and Organizational Perspectives.

PubMed

Wickwire, Emerson M; Geiger-Brown, Jeanne; Scharf, Steven M; Drake, Christopher L

2017-05-01

Throughout the industrialized world, nearly one in five employees works some form of nontraditional shift. Such shift work is associated with numerous negative health consequences, ranging from cognitive complaints to cancer, as well as diminished quality of life. Furthermore, a substantial percentage of shift workers develop shift work disorder, a circadian rhythm sleep disorder characterized by excessive sleepiness, insomnia, or both as a result of shift work. In addition to adverse health consequences and diminished quality of life at the individual level, shift work disorder incurs significant costs to employers through diminished workplace performance and increased accidents and errors. Nonetheless, shift work will remain a vital component of the modern economy. This article reviews seminal and recent literature regarding shift work, with an eye toward real-world application in clinical and organizational settings. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Improving measures of work-related physical functioning.

PubMed

McDonough, Christine M; Ni, Pengsheng; Peterik, Kara; Marfeo, Elizabeth E; Marino, Molly E; Meterko, Mark; Rasch, Elizabeth K; Brandt, Diane E; Jette, Alan M; Chan, Leighton

2017-03-01

To expand content of the physical function domain of the Work Disability Functional Assessment Battery (WD-FAB), developed for the US Social Security Administration's (SSA) disability determination process. Newly developed questions were administered to 3532 recent SSA applicants for work disability benefits and 2025 US adults. Factor analyses and item response theory (IRT) methods were used to calibrate and link the new items to the existing WD-FAB, and computer-adaptive test simulations were conducted. Factor and IRT analyses supported integration of 44 new items into three existing WD-FAB scales and the addition of a new 11-item scale (Community Mobility). The final physical function domain consisting of: Basic Mobility (56 items), Upper Body Function (34 items), Fine Motor Function (45 items), and Community Mobility (11 items) demonstrated acceptable psychometric properties. The WD-FAB offers an important tool for enhancement of work disability determination. The FAB could provide relevant information about work-related functioning for initial assessment of claimants; identifying denied applicants who may benefit from interventions to improve work and health outcomes; enhancing periodic review of work disability beneficiaries; and assessing outcomes for policies, programs and services targeting people with work disability.

Improving Measures of Work-Related Physical Functioning

PubMed Central

McDonough, Christine M.; Ni, Pengsheng; Peterik, Kara; Marfeo, Elizabeth E.; Marino, Molly E.; Meterko, Mark; Rasch, Elizabeth K; Brandt, Diane E.; Jette, Alan M; Chan, Leighton

2016-01-01

Purpose To expand content of the physical function domain of the Work Disability Functional Assessment Battery (WD-FAB), developed for the US Social Security Administration’s (SSA) disability determination process. Methods Newly developed questions were administered to 3,532 recent SSA applicants for work disability benefits and 2,025 US adults. Factor analyses and item response theory (IRT) methods were used to calibrate and link the new items to existing WD-FAB, and computer-adaptive test simulations were conducted. Results Factor and IRT analyses supported integration of 44 new items into 3 existing WD-FAB scales and the addition of a new 11-item scale (Community Mobility). The final physical function domain consisting of: Basic Mobility (56 items), Upper Body Function (34 items), Fine Motor Function (45 items), and Community Mobility (11 items) demonstrated acceptable psychometric properties. Conclusions The WD-FAB offers an important tool for enhancement of work disability determination. The FAB could provide relevant information about work-related functioning for initial assessment of claimants, identifying denied applicants who may benefit from interventions to improve work and health outcomes; enhancing periodic review of work disability beneficiaries; and assessing outcomes for policies, programs and services targeting people with work disability. PMID:28005243

The meaning of work for two high school seniors.

PubMed

Dale, Lucinda; Boenker, Julie; Easter, Dana; Niederhaus, Sara; Stach, Allison; Szuter, Kristin

2006-01-01

The workplace is increasingly serving as an important context for the development of work behaviors, interpersonal skills, and values for high school students. A lack of qualitative studies regarding the meaning of the subjective aspects of work for teens is evident. The purpose of this research study was to understand the meaning of work for two high school seniors through qualitative inquiry. The researchers interviewed two participants in a conference room to maintain privacy. Interviews were audio taped, transcribed verbatim, and returned to the interviewees for member check. The researchers analyzed transcriptions, coded for identification of themes, and shared them with the participants to ensure accuracy. The meaning of work for both participants included themes of gaining financial freedom, learning job-specific skills, learning the general work skill of time management, sacrificing and rearranging leisure time spent with friends and family, and helping to define choices related to future work and co-workers. The meaning of work for the participant who owned his own business included additional themes of improving interpersonal communication, marketing, budgeting, taking initiative and responsibility, prioritizing, organizing, and decision-making, all required to develop and expand a successful business.

Occupational exposures associated with work-related asthma and work-related wheezing among U.S. workers.

PubMed

Arif, Ahmed A; Delclos, George L; Whitehead, Lawrence W; Tortolero, Susan R; Lee, Eun S

2003-10-01

National estimates of occupational asthma (OA) in the United States are sparse. Using data from the Third National Health and Nutrition Examination Survey (NHANES III) 1988-1994, we analyzed associations between occupation and work-related asthma and work-related wheezing among U.S. workers. This study identified several occupations that were at risk of developing work-related asthma and/or wheezing, with cleaners and equipment cleaners showing the highest risks. Other major occupations identified were farm and agriculture; entertainment; protective services; construction; mechanics and repairers; textile; fabricators and assemblers; other transportation and material moving occupations; freight, stock, and material movers; and motor vehicle operators. The population attributable risks for work-related asthma and work-related wheezing were 26% and 27%, respectively. This study adds evidence to the literature that identifies work-related asthma as an important public health problem. Several occupations are targeted for additional evaluation and study. Of particular interest are cleaners, which are being increasingly reported as a risk group for asthma. Future intervention strategies need to be developed for effective control and prevention of asthma in the workplace. Copyright 2003 Wiley-Liss, Inc.

Reactions in Portland cement-clay mixtures : final report.

DOT National Transportation Integrated Search

1970-01-01

This study was an extension of earlier work by Sherwood and Noble to determine the nature of the clay content of common Virginia soils and the strength development of those soils in cement mixtures. In addition attempts were made (1) to study the rel...

49 CFR 7.10 - Public records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... holidays, during regular working hours. The Saint Lawrence Seaway Development Corporation has facilities at... hours of operation are 10:00-17:00 eastern time. (b) Certain DOT components also maintain public record... facilities for manual records. Additional information on the location and hours of operations for inspection...

Becoming Responsible Learners: Community Matters

ERIC Educational Resources Information Center

Wiersema, Janice A.; Licklider, Barbara L.; Ebbers, Larry

2013-01-01

Students at Iowa State University had the opportunity to enroll in a two-year National Science Foundation (NFS) Scholarship for Service (SFS) leadership development program, in addition to their work within their majors. This interdisciplinary program included faculty and students in computer engineering, computer science, mathematics, political…

Portfolios for Majors in Professional Communication.

ERIC Educational Resources Information Center

Killingsworth, M. Jimmie; Sanders, Scott P.

1987-01-01

Suggests general principles for developing assignments where students prepare portfolios that reveal their overall communication skills in addition to the usual job search tools. Emphasizes that students should concentrate on including works in the portfolio with the criteria of quality, variety, professionalism, and maturity in mind. (SKC)

Division File of Extension Research Materials; Additions During 1968.

ERIC Educational Resources Information Center

Byrn, Darcie, Comp.

In this annotated bibliography of acquisitions during 1968 appear 265 Extension studies on administrative organization and management; training and staff development; mobilizing participation in Extension work; local leadership; program content and planning procedures; general effectiveness and progress in Extension; teaching methods, techniques,…

Extension of Ostwald Ripening Theory

NASA Technical Reports Server (NTRS)

Baird, J.; Naumann, R.

1985-01-01

The objective is to develop models based on the mean field approximation of Ostwald ripening to describe the growth of second phase droplets or crystallites. The models will include time variations in nucleation rate, control of saturation through addition of solute, precipitating agents, changes in temperature, and various surface kinetic effects. Numerical integration schemes have been developed and tested against the asymptotic solution of Liftshitz, Slyozov and Wagner (LSW). A second attractor (in addition to the LSW distribution) has been found and, contrary to the LSW theory, the final distribution is dependent on the initial distribution. A series of microgravity experiments is being planned to test this and other results from this work.

Serum androgenic hormones motivate sexual behavior in adolescent boys.

PubMed

Udry, J R; Billy, J O; Morris, N M; Groff, T R; Raj, M H

1985-01-01

In order to separate hormonal from social effects on adolescent male sexual behavior, serum hormone assays were performed and questionnaire data on sexual motivation and behavior were collected on a representative sample of 102 boys in grades 8, 9, and 10 of a public school system. Free testosterone was a strong predictor of sexual motivation and behavior, with no additional contribution of other hormones. Including measures of pubertal development and age (indexing the effects of social processes) indicated no additional effects. Free testosterone, therefore, appears to affect sexual motivation directly and does not work through the social interpretation of the accompanying pubertal development.

The Preventable Admissions Care Team (PACT): A Social Work-Led Model of Transitional Care.

PubMed

Basso Lipani, Maria; Holster, Kathleen; Bussey, Sarah

2015-10-01

In 2010, the Preventable Admissions Care Team (PACT), a social work-led transitional care model, was developed at Mount Sinai to reduce 30-day readmissions among high-risk patients. PACT begins with a comprehensive bedside assessment to identify the psychosocial drivers of readmission. In partnership with the patient and family, a patient-centered action plan is developed and carried out through phone calls, accompaniments, navigations and home visits, as needed, in the first 30 days following discharge. 620 patients were enrolled during the pilot from September 2010-August 2012. Outcomes demonstrated a 43% reduction in inpatient utilization and a 54% reduction in emergency department visits among enrollees. In addition, 93% of patients had a follow-up appointment within 7-10 days of discharge and 90% of patients attended the appointment. The success of PACT has led to additional funding from the Centers for Medicare and Medicaid Services under the Community-based Care Transitions Program and several managed care companies seeking population health management interventions for high risk members.

An Object-Oriented Finite Element Framework for Multiphysics Phase Field Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael R Tonks; Derek R Gaston; Paul C Millett

2012-01-01

The phase field approach is a powerful and popular method for modeling microstructure evolution. In this work, advanced numerical tools are used to create a phase field framework that facilitates rapid model development. This framework, called MARMOT, is based on Idaho National Laboratory's finite element Multiphysics Object-Oriented Simulation Environment. In MARMOT, the system of phase field partial differential equations (PDEs) are solved simultaneously with PDEs describing additional physics, such as solid mechanics and heat conduction, using the Jacobian-Free Newton Krylov Method. An object-oriented architecture is created by taking advantage of commonalities in phase fields models to facilitate development of newmore » models with very little written code. In addition, MARMOT provides access to mesh and time step adaptivity, reducing the cost for performing simulations with large disparities in both spatial and temporal scales. In this work, phase separation simulations are used to show the numerical performance of MARMOT. Deformation-induced grain growth and void growth simulations are included to demonstrate the muliphysics capability.« less

ICBP90 Regulation of DNA Methylation, Histone Ubiquitination, and Tumor Suppressor Gene Expression in Breast Cancer Cells

DTIC Science & Technology

2011-07-01

type and mutant plants via chromatin immunoprecipitation (ChIP). Additionally, differences in centromere structure between wild-type and VIM1 RING...contexts. The proposed work is ongoing, and so far the major accomplishments include creation of relevant plant lines and development of in vitro assays...a comparative proteomics approach in wild-type plants and RING domain mutants (Months 1 - 18) This work is in early stages, with the main

Accessible Geoscience - Digital Fieldwork

NASA Astrophysics Data System (ADS)

Meara, Rhian

2017-04-01

Accessible Geoscience is a developing field of pedagogic research aimed at widening participation in Geography, Earth and Environmental Science (GEES) subjects. These subjects are often less commonly associated with disabilities, ethnic minorities, low income socio-economic groups and females. While advancements and improvements have been made in the inclusivity of these subject areas in recent years, access and participation of disabled students remains low. While universities are legally obligated to provide reasonable adjustments to ensure accessibility, the assumed incompatibility of GEES subjects and disability often deters students from applying to study these courses at a university level. Instead of making reasonable adjustments if and when they are needed, universities should be aiming to develop teaching materials, spaces and opportunities which are accessible to all, which in turn will allow all groups to participate in the GEES subjects. With this in mind, the Swansea Geography Department wish to enhance the accessibility of our undergraduate degree by developing digital field work opportunities. In the first instance, we intend to digitise three afternoon excursions which are run as part of a 1st year undergraduate module. Each of the field trips will be digitized into English- and Welsh-medium formats. In addition, each field trip will be digitized into British Sign Language (BSL) to allow for accessibility for D/deaf and hard of hearing students. Subtitles will also be made available in each version. While the main focus of this work is to provide accessible fieldwork opportunities for students with disabilities, this work also has additional benefits. Students within the Geography Department will be able to revisit the field trips, to revise and complete associated coursework. The use of digitized field work should not replace opportunities for real field work, but its use by the full cohort of students will begin to "normalize" accessible field work and inclusivity within the GEES subject areas.

Research of aerohydrodynamic and aeroelastic processes on PNRPU HPC system

NASA Astrophysics Data System (ADS)

Modorskii, V. Ya.; Shevelev, N. A.

2016-10-01

Research of aerohydrodynamic and aeroelastic processes with the High Performance Computing Complex in PNIPU is actively conducted within the university priority development direction "Aviation engine and gas turbine technology". Work is carried out in two areas: development and use of domestic software and use of well-known foreign licensed applied software packets. In addition, the third direction associated with the verification of computational experiments - physical modeling, with unique proprietary experimental installations is being developed.

Sleep problems across development: a pathway to adolescent risk taking through working memory.

PubMed

Thomas, April Gile; Monahan, Kathryn C; Lukowski, Angela F; Cauffman, Elizabeth

2015-02-01

Problematic sleep can be detrimental to the development of important cognitive functions, such as working memory, and may have the potential for negative behavioral consequences, such as risk-taking. In this way, sleep problems may be particularly harmful for youth-whose cognitive abilities are still developing and who are more susceptible to risky behavior. Using data from a large, national, longitudinal study, continuity and change in sleep problems were examined from 2 to 15 years of age and associated with deficits in working memory at age 15 and risk taking behaviors at age 18. Participants (N = 1,364 children; 48.3% female) were assessed for sleep problems (parent-report), working memory (behavioral task), and risk taking behavior (youth self-report). The sample was predominantly White (80.4%); additional races represented in the sample included Black/African American (12.9%), Asian/Pacific Islander (1.6%), American Indian/Eskimo/Aleut (.4%), and Other (4.7%). The findings suggest that sleep problems are likely to cascade across development, with sleep problems demonstrating continuity from infancy to early childhood, early childhood to middle childhood, and middle childhood to adolescence. Although sleep problems in infancy, early childhood, and middle childhood were not directly related to adolescent working memory, sleep problems during adolescence were associated with poorer adolescent working memory. In turn, these deficits in working memory were related to greater risk taking in late adolescence. In summary, the present results suggest that sleep problems in earlier periods are indicative of risk for sleep problems later in development, but that sleep problems in adolescence contribute uniquely to deficits in working memory that, in turn, lead to risky behavior during late adolescence.

Development of an Ergonomics Checklist for Investigation of Work-Related Whole-Body Disorders in Farming - AWBA: Agricultural Whole-Body Assessment.

PubMed

Kong, Y K; Lee, S J; Lee, K S; Kim, G R; Kim, D M

2015-10-01

Researchers have been using various ergonomic tools to study occupational musculoskeletal diseases in industrial contexts. However, in agricultural work, where the work environment is poorer and the socio-psychological stress is high due to the high labor intensities of the industry, current research efforts have been scarce, and the number of available tools is small. In our preliminary studies, which focused on a limited number of body parts and other working elements, we developed separate evaluation tools for the upper and lower extremities. The current study was conducted to develop a whole-body ergonomic assessment tool for agricultural work that integrates the existing assessment tools for lower and upper extremities developed in the preliminary studies and to verify the relevance of the integrated assessment tool. To verify the relevance of the Agricultural Whole-Body Assessment (AWBA) tool, we selected 50 different postures that occur frequently in agricultural work. Our results showed that the AWBA-determined risk levels were similar to the subjective risk levels determined by experts. In addition, as the risk level increased, the average risk level increased to a similar extent. Moreover, the differences in risk levels between the AWBA and expert assessments were mostly smaller than the differences in risk levels between other assessment tools and the expert assessments in this study. In conclusion, the AWBA tool developed in this study was demonstrated to be appropriate for use as a tool for assessing various postures commonly assumed in agricultural work. Moreover, we believe that our verification of the assessment tools will contribute to the enhancement of the quality of activities designed to prevent and control work-related musculoskeletal diseases in other industries.

Mothers' work patterns and Children's cognitive achievement: Evidence from the India Human Development survey.

PubMed

Vikram, Kriti; Chen, Feinian; Desai, Sonalde

2018-05-01

As female labor force participation increases globally, the relationship between maternal employment and children's development remains unclear. Using data from the India Human Development Survey (2005), we investigate the link between maternal employment and children's arithmetic and reading achievement. We develop a work pattern typology that goes beyond standard measures of employment and captures work intensity and its compatibility with child-rearing in a transitional economy. We find that the relationship between maternal employment and children's outcomes is not unidimensional. For example, children of self-employed mothers are not disadvantaged compared to those with stay-at-home mothers, but maternal employment in salaried jobs or wage work outside the home is negatively associated with cognitive skills in children. However, this negative association is reversed at higher levels of maternal education, suggesting greater access to resources and flexibility associated with better jobs mitigate the negative aspects of maternal employment posed by time constraints. Additionally, maternal employment is associated with maternal involvement in schoolwork and financial investment in academic activities, providing evidence that both time and resources devoted to children's education are significant. Copyright © 2018 Elsevier Inc. All rights reserved.

1,6-Conjugate addition of zinc alkyls to para-quinone methides in a continuous-flow microreactor.

PubMed

Jadhav, Abhijeet S; Anand, Ramasamy Vijaya

2016-12-20

An efficient method for the synthesis of alkyl diarylmethanes through the 1,6-conjugate addition of dialkylzinc reagents to para-quinone methides (p-QMs) has been developed under continuous flow conditions using a microreactor. This protocol allows to access unsymmetrical alkyl diarylmethanes in moderate to excellent yields using a wide range of p-QMs and dialkylzinc reagents. Interestingly, this transformation worked well without the requirement of a catalyst.

Reverse-engineering of gene networks for regulating early blood development from single-cell measurements.

PubMed

Wei, Jiangyong; Hu, Xiaohua; Zou, Xiufen; Tian, Tianhai

2017-12-28

Recent advances in omics technologies have raised great opportunities to study large-scale regulatory networks inside the cell. In addition, single-cell experiments have measured the gene and protein activities in a large number of cells under the same experimental conditions. However, a significant challenge in computational biology and bioinformatics is how to derive quantitative information from the single-cell observations and how to develop sophisticated mathematical models to describe the dynamic properties of regulatory networks using the derived quantitative information. This work designs an integrated approach to reverse-engineer gene networks for regulating early blood development based on singel-cell experimental observations. The wanderlust algorithm is initially used to develop the pseudo-trajectory for the activities of a number of genes. Since the gene expression data in the developed pseudo-trajectory show large fluctuations, we then use Gaussian process regression methods to smooth the gene express data in order to obtain pseudo-trajectories with much less fluctuations. The proposed integrated framework consists of both bioinformatics algorithms to reconstruct the regulatory network and mathematical models using differential equations to describe the dynamics of gene expression. The developed approach is applied to study the network regulating early blood cell development. A graphic model is constructed for a regulatory network with forty genes and a dynamic model using differential equations is developed for a network of nine genes. Numerical results suggests that the proposed model is able to match experimental data very well. We also examine the networks with more regulatory relations and numerical results show that more regulations may exist. We test the possibility of auto-regulation but numerical simulations do not support the positive auto-regulation. In addition, robustness is used as an importantly additional criterion to select candidate networks. The research results in this work shows that the developed approach is an efficient and effective method to reverse-engineer gene networks using single-cell experimental observations.

Report of the In Situ Resources Utilization Workshop

NASA Technical Reports Server (NTRS)

Fairchild, Kyle (Editor); Mendell, Wendell W. (Editor)

1988-01-01

The results of a workshop of 50 representatives from the public and private sector which investigated the potential joint development of the key technologies and mechanisms that will enable the permanent habitation of space are presented. The workshop is an initial step to develop a joint public/private assessment of new technology requirements of future space options, to share knowledge on required technologies that may exist in the private sector, and to investigate potential joint technology development opportunities. The majority of the material was produced in 5 working groups: (1) Construction, Assembly, Automation and Robotics; (2) Prospecting, Mining, and Surface Transportation; (3) Biosystems and Life Support; (4) Materials Processing; and (5) Innovative Ventures. In addition to the results of the working groups, preliminary technology development recommendations to assist in near-term development priority decisions are presented. Finally, steps are outlined for potential new future activities and relationships among the public, private, and academic sectors.

Progress in the Development of a Prototype Reuse Enablement System

NASA Astrophysics Data System (ADS)

Marshall, J. J.; Downs, R. R.; Gilliam, L. J.; Wolfe, R. E.

2008-12-01

An important part of promoting software reuse is to ensure that reusable software assets are readily available to the software developers who want to use them. Through dialogs with the community, the NASA Earth Science Data Systems Software Reuse Working Group has learned that the lack of a centralized, domain- specific software repository or catalog system addressing the needs of the Earth science community is a major barrier to software reuse within the community. The Working Group has proposed the creation of such a reuse enablement system, which would provide capabilities for contributing and obtaining reusable software, to remove this barrier. The Working Group has recommended the development of a Reuse Enablement System to NASA and has performed a trade study to review systems with similar capabilities and to identify potential platforms for the proposed system. This was followed by an architecture study to determine an expeditious and cost-effective solution for this system. A number of software packages and systems were examined through both creating prototypes and examining existing systems that use the same software packages and systems. Based on the results of the architecture study, the Working Group developed a prototype of the proposed system using the recommended software package, through an iterative process of identifying needed capabilities and improving the system to provide those capabilities. Policies for the operation and maintenance of the system are being established for the system, and the identification of system policies also has contributed to the development process. Additionally, a test plan is being developed for formal testing of the prototype, to ensure that it meets all of the requirements previously developed by the Working Group. This poster summarizes the results of our work to date, focusing on the most recent activities.

Re-engineering a pharmacy work system and layout to facilitate patient counseling.

PubMed

Lin, A C; Jang, R; Sedani, D; Thomas, S; Barker, K N; Flynn, E A

1996-07-01

The development and evaluation of a new work system and facility design for a chain of community pharmacies are described. A new work system was developed to optimize utilization of pharmacist and technician time and allow the pharmacy to increase patient counseling without adding personnel. In the new system, pharmacists would review prescriptions, check technicians' work, and dispense prescriptions, counseling patients as needed; technicians would enter prescriptions into the pharmacy computer and fill them. The existing work system and design were evaluated in June and July of 1992 by observing, classifying, and recording activities of pharmacy personnel three days per week at six pharmacies in the chain. Pharmacy designs that would work with the new work system were created by a university design class after consultation with representatives of the pharmacy chain and the university's college of pharmacy. The pharmacy chain selected one design, and a detailed floor plan and specifications were created. To test how the new design and system would work at each of the six test pharmacies, a computer simulation program was developed and verified by using the data collected on the existing pharmacy operations. Computer simulation showed that, with the new design and system, increasing patient counseling would increase patient waiting time slightly but would not require additional personnel. The layout and work system in a chain of community pharmacies were redesigned to facilitate patient counseling and make the best use of employee time.

Development of Conceptual Framework to Understand Factors Associated with Return to Work among Cancer Survivors: A Systematic Review

PubMed Central

CHOW, Sze Loon; TING, Anselm Su; SU, Tin Tin

2014-01-01

Abstract This systematic review was conducted to develop a conceptual framework that addresses various factors associated with return to work among cancer survivors. Databases Medline, EMBASE, ProQuest, PubMed and ScienceDirect were systematically searched using medical subject headings [MeSH] for studies published in English from 1990 to 2013. Studies that described adult cancer patients’ self-reported data or patients’ point of view on factors associated with return to work or employment status following cancer diagnosis were included. Articles selection was conducted in three steps: selection based on title and abstract, retrieval of full text and additions of articles from reference lists and recommendations from experts. Disagreement in data extraction was solved by consultation of third reviewer. Out of twenty seven articles, breast cancer was the most studied type of cancer (30%) while colorectal cancer was studied independently in two articles (7.4%). Conceptual framework on return to work identifies factors under environmental, personal, work demand, work ability, health status and financial factors. Extensive search of scientific databases over last 24 years and the development of the conceptual frame-work are the strength of this review. Conceptual framework reveals the various factors including non-medical factors associated with return to work upon cancer diagnosis. It serves as a reminder to the policy makers to focus on modifiable factors as potential areas for intervention to assist cancer survivors return to work, especially those with little financial assistance and health insurance. PMID:28435811

Exploration Medical System Technical Development

NASA Technical Reports Server (NTRS)

McGuire, K.; Middour, C.; Cerro, J.; Burba, T.; Hanson, A.; Reilly, J.; Mindock, J.

2017-01-01

The Exploration Medical Capability (ExMC) Element systems engineering goals include defining the technical system needed to implement exploration medical capabilities for Mars. This past year, scenarios captured in the medical system concept of operations laid the foundation for systems engineering technical development work. The systems engineering team analyzed scenario content to identify interactions between the medical system, crewmembers, the exploration vehicle, and the ground system. This enabled the definition of functions the medical system must provide and interfaces to crewmembers and other systems. These analyses additionally lead to the development of a conceptual medical system architecture. The work supports the ExMC community-wide understanding of the functional exploration needs to be met by the medical system, the subsequent development of medical system requirements, and the system verification and validation approach utilizing terrestrial analogs and precursor exploration missions.

Biological Oxidation of DCE through Manganese Addition

DTIC Science & Technology

2008-08-01

indication that remediation has been incomplete and some environmental and human health risk may remain. Therefore, developing, testing and...Alamac) site in Lumberton, Robeson County, NC. Solutions-IES has worked on this site for ten years conducting groundwater assessment , remediation ...44 5.1.4 Site Remediation Efforts

Cooperative and Concurrent Enrollment and College Retention

ERIC Educational Resources Information Center

Foster, Regina

2010-01-01

Oklahoma has a unique system of high schools, technology centers and community colleges that work together to enable students to receive education in technical areas. Given Oklahoma's shortage of technical degree recipients, the Cooperative Alliance Program (CAP) was developed to encourage additional students to begin technical programs during…

Developing Student Communication Skills while Assisting Nonprofit Organizations

ERIC Educational Resources Information Center

Addams, H. Lon; Woodbury, Denise; Allred, Tony; Addams, Joel

2010-01-01

Business writing instructors work diligently at raising the level of student writing performance in business communication classes. Some students, however, need additional motivation to apply writing concepts and perform to their highest level. Typically, business students are confronted with hypothetical writing situations, such as claim letters,…

77 FR 793 - National Environmental Justice Advisory Council; Request for Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... or serve on Work Groups to develop recommendations, advice letters, and reports to address specific... above. In addition, EPA is seeking nominees with knowledge in community sustainability, public health... sustainability issues at the national, state, or local level; Excellent interpersonal and consensus-building...

Perspectives in Linguistics.

ERIC Educational Resources Information Center

Waterman, John T.

Intended for the student of linguistics or the structural grammarian, who must develop an awareness of their intellectual heritage, the present work surveys the study of language in ancient times, the medieval and early modern periods, the nineteenth century, and the twentieth century to 1950. (This second edition includes additional material on…

Evaluating the developmental trajectory of the episodic buffer component of working memory and its relation to word recognition in children.

PubMed

Wang, Shinmin; Allen, Richard J; Lee, Jun Ren; Hsieh, Chia-En

2015-05-01

The creation of temporary bound representation of information from different sources is one of the key abilities attributed to the episodic buffer component of working memory. Whereas the role of working memory in word learning has received substantial attention, very little is known about the link between the development of word recognition skills and the ability to bind information in the episodic buffer of working memory and how it may develop with age. This study examined the performance of Grade 2 children (8 years old), Grade 3 children (9 years old), and young adults on a task designed to measure their ability to bind visual and auditory-verbal information in working memory. Children's performance on this task significantly correlated with their word recognition skills even when chronological age, memory for individual elements, and other possible reading-related factors were taken into account. In addition, clear developmental trajectories were observed, with improvements in the ability to hold temporary bound information in working memory between Grades 2 and 3, and between the child and adult groups, that were independent from memory for the individual elements. These findings suggest that the capacity to temporarily bind novel auditory-verbal information to visual form in working memory is linked to the development of word recognition in children and improves with age. Copyright © 2015 Elsevier Inc. All rights reserved.

Work process, performance and professional profile of a Hearing Health Network: reference for satisfaction.

PubMed

Escarce, Andrezza Gonzalez; Lemos, Stela Maris Aguiar; Carvalho, Sirley Alves da Silva

2016-01-01

To analyze the correlation between the satisfaction of professionals from the Hearing Health Care network in two micro-regions of Minas Gerais state and the sociodemographic profile, work process, and work performance in the health service. This is a cross-sectional, observational, analytic study with a non-probabilistic sample including 34 professionals from the Hearing Health Care services. Data collection occurred through individual interviews in the municipality of professional practice. Associations between the Professional Satisfaction variable and the explanatory variables Sociodemographic Data, Work Routine, and Developed Actions were conducted. Professionals with graduate studies were more satisfied with the human resources policy and the activities developed, whereas health civil servants showed more satisfaction with the wage policy and the work schedule. The correlation analysis between work process and satisfaction revealed a moderate positive correlation between items such as Health Promotion Actions, Satisfaction with Diagnostic Equipment, and Satisfaction with Maintenance Equipment. The present study revealed a higher level of satisfaction among professionals with graduate studies (human resources policy and activities developed) and civil servants (wage policy and work schedule). The relevance of this study lies on the important role that health professionals play on the Health Care Network. Additionally, the study of satisfaction level can provide a search for improvements, considering that satisfied professionals not only improve service quality, but also show greater creativity, commitment, and performance.

Probing physical properties at the nanoscale using atomic force microscopy

NASA Astrophysics Data System (ADS)

Ditzler, Lindsay Rachel

Techniques that measure physical properties at the nanoscale with high sensitivity are significantly limited considering the number of new nanomaterials being developed. The development of atomic force microscopy (AFM) has lead to significant advancements in the ability to characterize physical properties of materials in all areas of science: chemistry, physics, engineering, and biology have made great scientific strides do to the versatility of the AFM. AFM is used for quantification of many physical properties such as morphology, electrical, mechanical, magnetic, electrochemical, binding interactions, and protein folding. This work examines the electrical and mechanical properties of materials applicable to the field of nano-electronics. As electronic devices are miniaturized the demand for materials with unique electrical properties, which can be developed and exploited, has increased. For example, discussed in this work, a derivative of tetrathiafulvalene, which exhibits a unique loss of conductivity upon compression of the self-assembled monolayer could be developed into a molecular switch. This work also compares tunable organic (tetraphenylethylene tetracarboxylic acid and bis(pyridine)s assemblies) and metal-organic (Silver-stilbizole coordination compounds) crystals which show high electrical conductivity. The electrical properties of these materials vary depending on their composition allowing for the development of compositionally tunable functional materials. Additional work was done to investigate the effects of molecular environment on redox active 11-ferroceneyl-1 undecanethiol (Fc) molecules. The redox process of mixed monolayers of Fc and decanethiol was measured using conductive probe atomic force microscopy and force spectroscopy. As the concentration of Fc increased large, variations in the force were observed. Using these variations the number of oxidized molecules in the monolayer was determined. AFM is additionally capable of investigating interactions at the nanoscale, such as ligand-receptor interactions. This work examines the interactions between the enzyme dihydrofolate reductase (DHFR), a widely investigated enzyme targeted for cancer and antimicrobial pharmaceutical, and methotrexate (MTX), a strong competitive inhibitor of DHFR. The DHFR was immobilized on a gold substrate, bound through a single surface cysteine, and maintained catalytic activity. AFM probe was functionalized with MTX and the interaction strength was measured using AFM. This work highlights the versatility of AFM, specifically force spectroscopy for the quantification of electrical, mechanical, and ligand-receptor interactions at the nanoscale.

Very Long (> 48 hours) Shifts and Cardiovascular Strain in Firefighters: a Theoretical Framework

PubMed Central

2014-01-01

Shift work and overtime have been implicated as important work-related risk factors for cardiovascular disease (CVD). Many firefighters who contractually work on a 24-hr work schedule, often do overtime (additional 24-hr shifts) which can result in working multiple, consecutive 24-hr shifts. Very little research has been conducted on firefighters at work that examines the impact of performing consecutive 24-hr shifts on cardiovascular physiology. Also, there have been no standard field methods for assessing in firefighters the cardiovascular changes that result from 24-hr shifts, what we call “cardiovascular strain”. The objective of this study, as the first step toward elucidating the role of very long (> 48 hrs) shifts in the development of CVD in firefighters, is to develop and describe a theoretical framework for studying cardiovascular strain in firefighters on very long shifts (i.e., > 2 consecutive 24-hr shifts). The developed theoretical framework was built on an extensive literature review, our recently completed studies with firefighters in Southern California, e-mail and discussions with several firefighters on their experiences of consecutive shifts, and our recently conducted feasibility study in a small group of firefighters of several ambulatory cardiovascular strain biomarkers (heart rate, heart rate variability, blood pressure, salivary cortisol, and salivary C-reactive protein). The theoretical framework developed in this study will facilitate future field studies on consecutive 24-hr shifts and cardiovascular health in firefighters. Also it will increase our understanding of the mechanisms by which shift work or long work hours can affect CVD, particularly through CVD biological risk factors, and thereby inform policy about sustainable work and rest schedules for firefighters. PMID:24602344

Very Long (> 48 hours) Shifts and Cardiovascular Strain in Firefighters: a Theoretical Framework.

PubMed

Choi, Bongkyoo; Schnall, Peter L; Dobson, Marnie; Garcia-Rivas, Javier; Kim, Hyoungryoul; Zaldivar, Frank; Israel, Leslie; Baker, Dean

2014-03-06

Shift work and overtime have been implicated as important work-related risk factors for cardiovascular disease (CVD). Many firefighters who contractually work on a 24-hr work schedule, often do overtime (additional 24-hr shifts) which can result in working multiple, consecutive 24-hr shifts. Very little research has been conducted on firefighters at work that examines the impact of performing consecutive 24-hr shifts on cardiovascular physiology. Also, there have been no standard field methods for assessing in firefighters the cardiovascular changes that result from 24-hr shifts, what we call "cardiovascular strain". The objective of this study, as the first step toward elucidating the role of very long (> 48 hrs) shifts in the development of CVD in firefighters, is to develop and describe a theoretical framework for studying cardiovascular strain in firefighters on very long shifts (i.e., > 2 consecutive 24-hr shifts). The developed theoretical framework was built on an extensive literature review, our recently completed studies with firefighters in Southern California, e-mail and discussions with several firefighters on their experiences of consecutive shifts, and our recently conducted feasibility study in a small group of firefighters of several ambulatory cardiovascular strain biomarkers (heart rate, heart rate variability, blood pressure, salivary cortisol, and salivary C-reactive protein). The theoretical framework developed in this study will facilitate future field studies on consecutive 24-hr shifts and cardiovascular health in firefighters. Also it will increase our understanding of the mechanisms by which shift work or long work hours can affect CVD, particularly through CVD biological risk factors, and thereby inform policy about sustainable work and rest schedules for firefighters.

Ionic liquids as lubricant additives: A review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Yan; Qu, Jun

In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication withmore » an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.« less

Ionic liquids as lubricant additives: A review

DOE PAGES

Zhou, Yan; Qu, Jun

2016-12-28

In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication withmore » an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.« less

Assessment of the U.S. Department of Defense Efforts to Develop an Effective Medical Logistics System within the Afghan National Security Forces

DTIC Science & Technology

2011-06-14

aggressively to strengthen measures aimed at ensuring a successful ANSF transition. Ongoing actions include: • Working with CURE International and the ANSF...sustainability include the following ongoing actions: • Working with CURE International and the MoD and MoI to complete, promulgate and implement Standards of Care...approximately June-August 2011. In addition, NTM-A/CSTC-A previously awarded an approximately $1.57M contract with the NGO CURE International to

Learning through vulnerability: a mentor-mentee experience.

PubMed

Jones, Kohar; Reis, Shmuel

2010-01-01

The following essay, drawn from the journals and work notebook of a family medicine resident and a visiting clinical mentor, chronicles their work together in an Advanced Clinical Mentoring program. This program included afternoons of direct clinical observation immediately followed by feedback sessions. In addition to addressing specific professional issues, such as time management, limiting patient encounters, agenda matching, and the One-Minute Preceptor model, the authors developed personally as they opened themselves to learning and growing as a clinician and a teacher.

Increasing the object recognition distance of compact open air on board vision system

NASA Astrophysics Data System (ADS)

Kirillov, Sergey; Kostkin, Ivan; Strotov, Valery; Dmitriev, Vladimir; Berdnikov, Vadim; Akopov, Eduard; Elyutin, Aleksey

2016-10-01

The aim of this work was developing an algorithm eliminating the atmospheric distortion and improves image quality. The proposed algorithm is entirely software without using additional hardware photographic equipment. . This algorithm does not required preliminary calibration. It can work equally effectively with the images obtained at a distances from 1 to 500 meters. An algorithm for the open air images improve designed for Raspberry Pi model B on-board vision systems is proposed. The results of experimental examination are given.

A compendium of computational fluid dynamics at the Langley Research Center

NASA Technical Reports Server (NTRS)

1980-01-01

Through numerous summary examples, the scope and general nature of the computational fluid dynamics (CFD) effort at Langley is identified. These summaries will help inform researchers in CFD and line management at Langley of the overall effort. In addition to the inhouse efforts, out of house CFD work supported by Langley through industrial contracts and university grants are included. Researchers were encouraged to include summaries of work in preliminary and tentative states of development as well as current research approaching definitive results.

Accommodating complexity and human behaviors in decision analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Backus, George A.; Siirola, John Daniel; Schoenwald, David Alan

2007-11-01

This is the final report for a LDRD effort to address human behavior in decision support systems. One sister LDRD effort reports the extension of this work to include actual human choices and additional simulation analyses. Another provides the background for this effort and the programmatic directions for future work. This specific effort considered the feasibility of five aspects of model development required for analysis viability. To avoid the use of classified information, healthcare decisions and the system embedding them became the illustrative example for assessment.

Ionic Liquids as Novel Lubricants and /or Lubricant Additives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu, J.; Viola, M. B.

2013-10-31

This ORNL-GM CRADA developed ionic liquids (ILs) as novel lubricants or oil additives for engine lubrication. A new group of oil-miscible ILs have been designed and synthesized with high thermal stability, non-corrosiveness, excellent wettability, and most importantly effective anti-scuffing/anti-wear and friction reduction characteristics. Mechanistic analysis attributes the superior lubricating performance of IL additives to their physical and chemical interactions with metallic surfaces. Working with a leading lubricant formulation company, the team has successfully developed a prototype low-viscosity engine oil using a phosphonium-phosphate IL as an anti-wear additive. Tribological bench tests of the IL-additized formulated oil showed 20-33% lower friction inmore » mixed and elastohydrodynamic lubrication and 38-92% lower wear in boundary lubrication when compared with commercial Mobil 1 and Mobil Clean 5W-30 engine oils. High-temperature, high load (HTHL) full-size engine tests confirmed the excellent anti-wear performance for the IL-additized engine oil. Sequence VID engine dynamometer tests demonstrated an improved fuel economy by >2% for this IL-additized engine oil benchmarked against the Mobil 1 5W-30 oil. In addition, accelerated catalyst aging tests suggest that the IL additive may potentially have less adverse impact on three-way catalysts compared to the conventional ZDDP. Follow-on research is needed for further development and optimization of IL chemistry and oil formulation to fully meet ILSAC GF-5 specifications and further enhance the automotive engine efficiency and durability.« less

A new flux-limited, two-dimensional, nonsymmetric tensor shock viscosity for DYNA2D: Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benson, D.J.

1988-08-15

A new artificial viscosity that is being developed for DYNA2D is described in this progress report. It incorporates the one- dimensional, flux-limited viscosity developed by Randy Christensen into a two-dimensional setting. In addition, it tries to overcome some of the difficulties associated with traditional bulk viscosity formulations by using an nonsymmetric viscosity tensor. A different nonsymmetric approach (and a symmetrized version of it) is being used in SHALE by Len Margolin with great success. In a later section of this paper, the results of DYNA2D and SHALE for the ''Saltzman problem'' are compared. The general organization of this report ismore » as follows: First it presents the one-dimensional, flux-limited viscosity developed by Christensen. An nonsymmetric tensor viscosity is then developed and the addition of flux-limiting to it is discussed. The issue of boundary conditions turns out to be crucial, and some issues associated with them are unresolved. The current boundary conditions and the issues associated with them are discussed. Example calculations are also given. The current work is summarized and future work is outlined in the first chapter. This brief progress report is the basis of a future journal paper. The work presented in here is unfinished, and some of the results and algorithms will undoubtedly be changed before the final paper. No attempt has been made to survey the results of others in this report, but a limited survey will be incorporated in the journal paper. 7 refs., 39 figs.« less

Additive manufacturing of optical components

NASA Astrophysics Data System (ADS)

Heinrich, Andreas; Rank, Manuel; Maillard, Philippe; Suckow, Anne; Bauckhage, Yannick; Rößler, Patrick; Lang, Johannes; Shariff, Fatin; Pekrul, Sven

2016-08-01

The development of additive manufacturing methods has enlarged rapidly in recent years. Thereby, the work mainly focuses on the realization of mechanical components, but the additive manufacturing technology offers a high potential in the field of optics as well. Owing to new design possibilities, completely new solutions are possible. This article briefly reviews and compares the most important additive manufacturing methods for polymer optics. Additionally, it points out the characteristics of additive manufactured polymer optics. Thereby, surface quality is of crucial importance. In order to improve it, appropriate post-processing steps are necessary (e.g. robot polishing or coating), which will be discussed. An essential part of this paper deals with various additive manufactured optical components and their use, especially in optical systems for shape metrology (e.g. borehole sensor, tilt sensor, freeform surface sensor, fisheye lens). The examples should demonstrate the potentials and limitations of optical components produced by additive manufacturing.

A Serious Game for Anterior Cruciate Ligament Rehabilitation: Software Development Aspects and Game Engagement Assessment.

PubMed

Cordeiro d'Ornellas, Marcos; Santos Machado, Alison; de Moraes, Jefferson Potiguara; Cervi Prado, Ana Lúcia

2017-01-01

This work presents the steps for developing a serious game that allows the interaction through natural gestures, whose main purpose is to contribute to the treatment of individuals who have suffered an injury to the anterior cruciate ligament (ACL). In addition to the serious game development process, the users' gaming experience were performed. Through the evaluation assessment, positive results were obtained in relation to various aspects of the game engagement, proving the playful factor of this activity.

Development, testing, and certification of Owens-Illinois model SEC-601 solar energy collector system

NASA Technical Reports Server (NTRS)

Parker, J. C.

1979-01-01

The final results are presented of the additional development work on the existing air-cooled solar energy collector subsystem for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the deliverable end items, lists program objectives, relates how they were accomplished, deals with problems encountered during fabrication and testing, and includes a certification statement of performance. The report shows that the products developed are marketable and suitable for public use.

Development of Oxidation Resistant Coatings on GRCop-84 Substrates by Cold Spray Process

NASA Technical Reports Server (NTRS)

Karthikeyan, J.

2007-01-01

GRCop-84, a Cu-CR-Nb alloy, has been developed for rocket engine liner applications. For maximum life additional oxidation protection is required to prevent blanching. NiCrAlY was identified as a suitable coating, and efforts were initiated to develop suitable coating techniques. Cold spray is one technique under consideration. Efforts at ASB Industries to produce dense, adherent coatings are detailed. The work culminated in the production of samples for testing at NASA Glenn Research Center.

The ALIVE program: developing a web-based professional development program for nursing leaders in the home healthcare sector.

PubMed

Lankshear, Sara; Huckstep, Sherri; Lefebre, Nancy; Leiterman, Janis; Simon, Deborah

2010-05-01

Home healthcare nurses often work in isolation and rarely have the opportunity to meet or congregate in one location. As a result, nurse leaders must possess unique leadership skills to supervise and manage a dispersed employee base from a distance. The nature of this dispersed workforce creates an additional challenge in the ability to identify future leaders, facilitate leadership capacity, and enhance skill development to prepare them for future leadership positions. The ALIVE (Actively Leading In Virtual Environments) web-based program was developed to meet the needs of leaders working in virtual environments such as the home healthcare sector. The program, developed through a partnership of three home healthcare agencies, used nursing leaders as content experts to guide program development and as participants in the pilot. Evaluation findings include the identification of key competencies for nursing leaders in the home healthcare sector, development of program learning objectives and participant feedback regarding program content and delivery.

Analysis and control of the METC fluid-bed gasifier. Quarterly report, October 1994--January 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farell, A.E.; Reddy, S.

1995-03-01

This document summarizes work performed for the period 10/1/94 to 2/1/95. The initial phase of the work focuses on developing a simple transfer function model of the Fluidized Bed Gasifier (FBG). This transfer function model will be developed based purely on the gasifier responses to step changes in gasifier inputs (including reactor air, convey air, cone nitrogen, FBG pressure, and coal feedrate). This transfer function model will represent a linear, dynamic model that is valid near the operating point at which the data was taken. In addition, a similar transfer function model will be developed using MGAS in order tomore » assess MGAS for use as a model of the FBG for control systems analysis.« less

Sub-micron lines patterning into silica using water developable chitosan bioresist films for eco-friendly positive tone e-beam and UV lithography

NASA Astrophysics Data System (ADS)

Caillau, Mathieu; Chevalier, Céline; Crémillieu, Pierre; Delair, Thierry; Soppera, Olivier; Leuschel, Benjamin; Ray, Cédric; Moulin, Christophe; Jonin, Christian; Benichou, Emmanuel; Brevet, Pierre-François; Yeromonahos, Christelle; Laurenceau, Emmanuelle; Chevolot, Yann; Leclercq, Jean-Louis

2018-03-01

Biopolymers represent natural, renewable and abundant materials. Their use is steadily growing in various areas (food, health, building …) but, in lithography, despite some works, resists, solvents and developers are still oil-based and hazardous chemicals. In this work, we replaced synthetic resist by chitosan, a natural, abundant and hydrophilic polysaccharide. High resolution sub-micron patterns were obtained through chitosan films as water developable, chemically unmodified, positive tone mask resist for an eco-friendly electron beam and deep-UV (193 nm) lithography process. Sub-micron patterns were also successfully obtained using a 248 nm photomasker thanks to the addition of biosourced photoactivator, riboflavin. Patterns were then transferred by plasma etching into silica even for high resolution patterns.

Structural Development of the Oat Plant

NASA Technical Reports Server (NTRS)

Kaufman, Peter B.; Brock, Thomas G.

1992-01-01

The anatomical structure and morphology of the oat plant (Avena sativa L.) have been reviewed previously by Hector (1936), Bonnett (1961a,b) and Coffman (1977). In addition, Bonnett published detailed accounts of oat panicle development (1937, 1961a,b). This work has been summarized by Esau in her book, Anatomy of Seed Plants, in 1977. It is not the purpose of the present authors to simply go over all this same material again in a repetitive fashion, but rather, to emphasize some of the more recent and previously overlooked work on structural development of the oat plant, with emphasis on the major cultivated species, A. sativa (see Stanton, 1955; Coffman, 1977 for descriptions of this species). The material presented here should be of use to oat breeders, agronomists, and plant physiologists.

Demonstration of Next-Generation PEM CHP Systems for Global Markets Using PBI Membrane Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vogel, John; Fritz Intwala, Katrina

Plug Power and BASF have conducted eight years of development work prior to this project, demonstrating the potential of PBI membranes to exceed many DOE technical targets. This project consisted of; 1.The development of a worldwide system architecture; 2.Stack and balance of plant module development; 3.Development of an improved, lower cost MEA electrode; 4.Receipt of an improved MEA from the EU consortium; 5.Integration of modules into a system; and 6.Delivery of system to EU consortium for additional integration of technologies and testing.

Nonequilibrium radiation and chemistry models for aerocapture vehicle flowfields

NASA Technical Reports Server (NTRS)

Carlson, Leland A.

1990-01-01

The primary tasks during January 1990 to June 1990 have been the development and evaluation of various electron and electron-electronic energy equation models, the continued development of improved nonequilibrium radiation models for molecules and atoms, and the continued development and investigation of precursor models and their effects. In addition, work was initiated to develop a vibrational model for the viscous shock layer (VSL) nonequilibrium chemistry blunt body engineering code. Also, an effort was started associated with the effects of including carbon species, say from an ablator, in the flowfield.

Effect of Sodium bicarbonate on Fire behaviour of tilled E- Glass Reinforced Epoxy Composites

NASA Astrophysics Data System (ADS)

Girish, S.; Devendra, K.; Bharath, K. N.

2016-09-01

Composites such as fibre reinforced polymers give us the good mechanical properties, but their fire behaviour is not appreciable and needs to be improved. In this work, E- glass fiber is used as a reinforcement material and Epoxy resin is used as a matrix with particulate sodium bi-carbonate (NaHCO3) is used as additive. The hand lay-up technique is adopted for the development of composites by varying percentage of additive. All the tests were conducted according to ASTM standards to study the Fire behaviour of the developed composites. The different fire properties like Ignition time, mass loss rate and flame propagation rate of Fiber Reinforced Polymers (FRP) with NaHCO3 are compared with neat FRPs. It is found that the ignition time increases as the percentage of additive is increased.

Natural gas storage in bedded salt formations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macha, G.

1996-09-01

In 1990 Western Resources Inc. (WRI) identified the need for additional natural gas storage capacity for its intrastate natural gas system operated in the state of Kansas. Western Resources primary need was identified as peak day deliverability with annual storage balancing a secondary objective. Consequently, an underground bedded salt storage facility, Yaggy Storage Field, was developed and placed in operation in November 1993. The current working capacity of the new field is 2.1 BCF. Seventy individual caverns are in service on the 300 acre site. The caverns vary in size from 310,000 CF to 2,600,000 CF. Additional capacity can bemore » added on the existing acreage by increasing the size of some of the smaller existing caverns by further solution mining and by development of an additional 30 potential well sites on the property.« less

Effect of moisture and aging on asphalt pavement life : part 1 - effect of moisture.

DOT National Transportation Integrated Search

1996-01-01

Considerable research has been carried out on the effect of water on asphalt mixtures, and test methods to investigate the effect of water have been developed. However, most of this work has been related to stripping and the effect of additives, wher...

Development and testing of the Junkeeper Control Corporation integrated programmable electronic controller and hydronics package

NASA Technical Reports Server (NTRS)

Hankins, J. D.

1979-01-01

Additional developmental work on the existing programmable electronic controller and hydronic package for use with solar heating and cooling systems is summarized. The controller/hydronics subsystems passed all acceptance tests and performance criteria. The subsystems were shown marketable for public use.

Creating Communities of Professional Practice in the Correctional Education Classroom

ERIC Educational Resources Information Center

DelliCarpini, Margo

2008-01-01

Meaningful professional development (PD) for correctional educators is not frequently addressed, though they work with students who are most at-risk in terms of academic success. In addition to the challenges that the students themselves face, there are obstacles inherent in administering educational programs in correctional facilities whose goals…

Career Development Programming Strategies for Transitioning Incarcerated Adolescents to the World of Work

ERIC Educational Resources Information Center

Waintrup, Miriam G.; Unruh, Deanne K.

2008-01-01

Formerly incarcerated adolescents with disabilities face additional barriers to a successful transition to adulthood when released from the youth correctional facility often with societal expectations of transitioning directly to adulthood. Employment and post-secondary enrollment may serve as protective factors and reduce the likelihood of future…

Vibrations and structureborne noise in space station

NASA Technical Reports Server (NTRS)

Vaicaitis, R.

1985-01-01

The related literature was reviewed and a preliminary analytical model was developed for simplified acoustic and structural geometries for pressurized and unpressurized space station modules. In addition to the analytical work, an experimental program on structureborne noise generation and transmission was started. A brief review of those accomplishments is given.

Methodology for determining economic impacts of raised medians : data collection for additional case studies

DOT National Transportation Integrated Search

1998-10-01

The objective of this four-year resaerch effort is to develop and test a methodology to estimate the economic impact of median design. This report summarizes the work performed in the second year. The secnd year of this study included collecting data...

National Council on the Handicapped. [Third] Annual Report.

ERIC Educational Resources Information Center

National Council on the Handicapped, Washington, DC.

During its third year of operation, the National Council on the Handicapped continued to develop priorities for the National Institute of Handicapped Research (NIHR) and worked to identify all research on disabilities and handicaps that is currently underway. In addition, the council's Committee on Services undertook a review and assessment of…

Introducing IT Strategy in an Introductory Course

ERIC Educational Resources Information Center

Woods, David M.

2016-01-01

Professionals working in technology fields face continuing challenges to be involved in the decision-making process about how technology is used by organizations rather than just implementing these decisions. Developing skills for thinking and acting strategically are key skills for our students. This has been recognized by the addition of an IS…

Small Oscillations via Conservation of Energy

ERIC Educational Resources Information Center

Troy, Tia; Reiner, Megan; Haugen, Andrew J.; Moore, Nathan T.

2017-01-01

The work describes an analogy-based small oscillations analysis of a standard static equilibrium lab problem. In addition to force analysis, a potential energy function for the system is developed, and by drawing out mathematical similarities to the simple harmonic oscillator, we are able to describe (and experimentally verify) the period of small…

Helping Youth Decide: A Workshop Guide.

ERIC Educational Resources Information Center

Duquette, Donna Marie; Boo, Katherine

This guide was written to complement the publication "Helping Youth Decide," a manual designed to help parents develop effective parent-child communication and help their children make responsible decisions during the adolescent years. The workshop guide is intended to assist people who work with families to provide additional information and…

Engineering Communication Interface: An Engineering Multi-Disciplinary Project

ERIC Educational Resources Information Center

Prescott, David; El-Sakran, Tharwat; Albasha, Lutfi; Aloul, Fadi; Al-Assaf, Yousef

2011-01-01

Well-developed professional communication skills, collaborative work practices, effective self-management and a clear understanding of social responsibility and ethical practices are essential for the new engineer who hopes to contribute to the profession and build a career. These attributes are in addition to the traditional sound knowledge of…

A Survey of Compensation for Graduate Assistantships in Student Affairs.

ERIC Educational Resources Information Center

Barratt, Will; Cooper, Diane

1994-01-01

Surveyed 53 coordinators of college student personnel/student development preparation programs to examine monetary compensation of graduate assistants, number of work hours required, duties, compensation in addition to or other than pay, course load restrictions, number of students enrolled in program with assistantships, and tuition costs.…

Gigabit Network Communications Research, Quarterly R and D Report Number 10

DTIC Science & Technology

1993-03-01

operation of the Internet and the research and development activities of the Internet community. It features reports from the IAB, the Internet ... Research Task Force and its research groups, and the Internet Engineering Task Force and its working groups in addition to the reports from approximately 30

Visual Literacy, Creativity and the Teaching of Argument

ERIC Educational Resources Information Center

Shivers, James; Levenson, Cyra; Tan, Mei

2017-01-01

A vibrant theory of change capable of fueling critical practice may be an indispensable feature of teaching argument in secondary education. According to the PIE model (Perception, Interpretation, Expression), layers of experience build a cognitive scaffold to support the development of critical skills. In addition, incorporating works of art and…

Math Attitudes of Computer Education and Instructional Technology Students

ERIC Educational Resources Information Center

Tekerek, Mehmet; Yeniterzi, Betul; Ercan, Orhan

2011-01-01

Computer Education and Instructional Technology (CEIT) Departments train computer teachers to fill gap of computer instructor in all grades of schools in Turkey. Additionally graduates can also work as instructional technologist or software developer. The curriculum of CEIT departments includes mathematics courses. The aim of this study is to…

Watching with New Eyes: Broadening the English Curriculum through Cinema Studies.

ERIC Educational Resources Information Center

Chipman, Bruce

One educator's interdisciplinary interests in literature, film, and culture studies led him to the establishment of "Film Study," an upper school English course in which students develop a sense of "film literacy" through detailed "reading" of visual images; in addition, students evolve a working critical vocabulary…

Experiences that develop the ability to think strategically.

PubMed

Goldman, Ellen; Cahill, Terrence; Filho, Rubens Pessanha

2009-01-01

The ability to think strategically is an admired and a sought-after leadership requirement, yet we know little about how it develops. The purpose of this study is to identify specific experiences that contribute to the development of an individual's ability to think strategically. We identified eight work experiences, including different types of organizational projects, processes, and relationships, that contribute to an individual's strategic thinking ability. We also delineate specific characteristics material to each experience. These characteristics indicate that considerable time and focus are required to develop the ability to think strategically. In addition, the experiences are not all accessed equally: Women are less likely to have nonrelational experiences, while chief executive officers are more likely to have the most challenging ones. In addition, we found differences regarding work-related continuing education activities. Respondents rated nonhealthcare conferences and reading behind all other identified experiences that contribute to strategic thinking ability. Individuals can implement several strategies to improve their strategic thinking ability, including deliberately incorporating the requisite experiences into their development plans, ensuring that the experiences incorporate the required characteristics, and improving the benefit received from attending educational programs in nonhealthcare industries. Organizations can implement several strategies to ensure the experiences are as effective as possible, such as appraising gender differences across the experiences and reviewing the organization's strategic planning processes for the characteristics that best encourage strategic thinking.

Shiftwork, work-family conflict among Italian nurses, and prevention efficacy.

PubMed

Camerino, Donatella; Sandri, Marco; Sartori, Samantha; Conway, Paul Maurice; Campanini, Paolo; Costa, Giovanni

2010-07-01

Shiftwork may be a demanding situation because it raises problems for reconciling work and nonwork activities; as such, this conflict may be mitigated by designing and implementing effective preventative actions at the workplace. There is a paucity of research directly examining the impact of work schedules and preventative measures at work on work-family conflict. Hence, the authors posed the following questions in their study: What is the impact of different work schedules on work-family conflict? Is a preventative culture associated with less work-family conflict? Is work-family conflict associated with specific health and well-being indicators and if so, how does work-family conflict affect well-being as compared with other potential determinants? A subset of 750 nurses ( approximately 10% of total workforce) were randomly selected from a larger sample. Nurses completed the Italian version of the NEXT questionnaire plus newly developed items to create an index on occupational safety and health prevention at work. Data were explored using two data mining techniques, Random Forests and Bayesian Networks, and modeled using hierarchical linear regression models. In all, 664 (88.5% of sample) nurses answered the questionnaire. The authors found that different work schedules had a differential impact on work-family conflict. In addition, effective risk communication between workers and people in charge of safety and health, and participation in preventative activities, quantitative workload, performing tasks not belonging to the nursing profession, and the number of weekends/month spent at work were all strongly associated with work-family conflict. The variable "time schedules" also acted as an effect modifier in the relationship between effective communication and participation in preventative activities and work-family conflict. In addition, quantitative demands played a role as a mediator (30% of total effect) in the relationship between effective communication and participation in preventative activities and work-family conflict. Work-family conflict was significantly associated with burnout, sleep, and presenteeism; its association with burnout was higher than other precursors. Shift schedules that involved night work implied different workload demands, less effective communication, and participation in preventative activities than the other work schedules considered. The presence of a preventative culture directly reduced work-family conflict and indirectly via reduction of work demands. The authors conclude that the development of a preventative culture among irregular and night shiftworkers can be effective in reducing work-family conflict, while positively increasing well-being and job performance.

Life-span development of visual working memory: when is feature binding difficult?

PubMed

Cowan, Nelson; Naveh-Benjamin, Moshe; Kilb, Angela; Saults, J Scott

2006-11-01

We asked whether the ability to keep in working memory the binding between a visual object and its spatial location changes with development across the life span more than memory for item information. Paired arrays of colored squares were identical or differed in the color of one square, and in the latter case, the changed color was unique on that trial (item change) or was duplicated elsewhere in the array (color-location binding change). Children (8-10 and 11-12 years old) and older adults (65-85 years old) showed deficits relative to young adults. These were only partly simulated by dividing attention in young adults. The older adults had an additional deficiency, specifically in binding information, which was evident only when item- and binding-change trials were mixed together. In that situation, the older adults often overlooked the more subtle, binding-type changes. Some working memory processes related to binding undergo life-span development in an inverted-U shape, whereas other, bias- and salience-related processes that influence the use of binding information seem to develop monotonically.

Investigation of the exposure to radon and progeny in the thermal spas of Loutraki (Attica-Greece): results from measurements and modelling.

PubMed

Nikolopoulos, Dimitrios; Vogiannis, Efstratios; Petraki, Ermioni; Zisos, Athanasios; Louizi, Anna

2010-01-01

Radon and progeny ((218)Po, (214)Pb, (214)Bi and (214)Po) in thermal spas are well known radioactive pollutants identified for additional radiation burden of patients due to the activity concentration peaks which appear during bath treatment or due to drinking of waters of high radon content. This burden affects additionally the working personnel of the spas. The present paper has focused on the thermal spas of Loutraki (Attica-Greece). The aim was the investigation of the health impact for patients and working personnel due to radon and progeny. Attention has been paid to radon and progeny transient concentration peaks (for bath treatment) and to radon of thermal waters (both for bath treatment and drinking therapy). Designed experiments have been carried out, which included radon and progeny activity concentration measurements in thermal waters and ambient air. Additionally, published models for description of radon and progeny transient concentration peaks were employed. The models were based on physicochemical processes involved and employed non linear first order derivative mass balance differential equations which were solved numerically with the aid of specially developed computer codes. The collected measurements were analysed incorporating these models. Results were checked via non linear statistical tests. Predictions and measurements were found in close agreement. Non linear parameters were estimated. The models were employed for dosimetric estimations of patients and working personnel. The effective doses of patients receiving bath treatment were found low but not negligible. The corresponding doses to patients receiving potable treatment were found high but below the proposed international limits. It was found that the working personnel are exposed to considerable effective doses, however well below the acceptable limits for workers. It was concluded that treatment and working in the Loutraki spas leads to intense variations of radon and progeny and consequently additional health impact both to patients and working personnel.

Study to define an approach for developing a computer-based system capable of automatic, unattended assembly/disassembly of spacecraft, phase 1

NASA Technical Reports Server (NTRS)

Nevins, J. L.; Defazio, T. L.; Seltzer, D. S.; Whitney, D. E.

1981-01-01

The initial set of requirements for additional studies necessary to implement a space-borne, computer-based work system capable of achieving assembly, disassembly, repair, or maintenance in space were developed. The specific functions required of a work system to perform repair and maintenance were discussed. Tasks and relevant technologies were identified and delineated. The interaction of spacecraft design and technology options, including a consideration of the strategic issues of repair versus retrieval-replacement or destruction by removal were considered along with the design tradeoffs for accomplishing each of the options. A concept system design and its accompanying experiment or test plan were discussed.

[Tomorrow's family doctor].

PubMed

Bischoff, T; Herzig, L; Aubert, J; Sommer, J; Haller, D M

2012-05-16

The profession of family doctor will undergo profound changes in the coming decade due to external, political, demographic and societal developments. Changes will also occur from within the profession affecting its content and its functioning. Other influences, in addition to generational developments (reduced working hours, feminisation, revaluation of the work-life balance), will come from collaboration with new professions, news structures as well as technical and human progress. In this transitional period it is important to uphold core values of family medicine, in particular coordination, continuity of care and the global approach to patients. In training future family doctors we must both prepare them for new skills and roles, and continue to share the core values with them.

Beyond pluralism: psychoanalysis and the workings of mind.

PubMed

Pine, Fred

2011-10-01

Subjects that Freud excluded or incompletely explored have been sites of theoretical expansion in over a century of observation: the role of the other, the self, the preoedipal period, action, the countertransference, limits to neutrality/anonymity/abstinence, the loci of the analytic drama, effects beyond interpretation, agency, and basic needs (versus wishes). These developments have led to conflicting theories and sect-like groupings within the field. Group psychological processes underlying this are discussed; and a broad and inclusive view of psychoanalysis is proposed under the heading of the study of the workings of mind. Additionally, substantial integrative proposals are offered with respect to the central tasks of individual development, theories of mind, the relational turn, and aspects of technique.

Developing an Extended Model of the Relation between Work Motivation and Health as Affected by the Work Ability as Part of a Corporate Age Management Approach

PubMed Central

Feißel, Annemarie; Peter, Richard; Swart, Enno

2018-01-01

Due to demographic changes, the employee structure in companies is changing dramatically. It will be necessary to offer employees suitable, age-adequate jobs. As one of its foremost goals, optimized business management strategies must create conditions for guaranteeing a person’s health, work ability, and work motivation. In the context of corporate age management concepts, the literature recommends to retain and integrate older employees in the organization. This paper aims at developing an extended model of the relation between work motivation and health as affected by work ability and at deriving a host of measures that enterprises can apply as part of a corporate age management policy to counteract the impact of demographic changes. The model also takes into consideration factors influencing the relation between work motivation and health as affected by work ability (socio-demographic parameters, occupation, work-related stress). Additionally, the extended model translates the literature-based results into a corporate setting by way of a corporate age management program. The model comprises a process focusing on retaining and promoting work ability in order to maintain or boost work motivation and health. The host of measures presented serves as a basis to preventively counter demographic change on an individual, interpersonal, and structural level. PMID:29673218

Developing an Extended Model of the Relation between Work Motivation and Health as Affected by the Work Ability as Part of a Corporate Age Management Approach.

PubMed

Feißel, Annemarie; Peter, Richard; Swart, Enno; March, Stefanie

2018-04-17

Due to demographic changes, the employee structure in companies is changing dramatically. It will be necessary to offer employees suitable, age-adequate jobs. As one of its foremost goals, optimized business management strategies must create conditions for guaranteeing a person’s health, work ability, and work motivation. In the context of corporate age management concepts, the literature recommends to retain and integrate older employees in the organization. This paper aims at developing an extended model of the relation between work motivation and health as affected by work ability and at deriving a host of measures that enterprises can apply as part of a corporate age management policy to counteract the impact of demographic changes. The model also takes into consideration factors influencing the relation between work motivation and health as affected by work ability (socio-demographic parameters, occupation, work-related stress). Additionally, the extended model translates the literature-based results into a corporate setting by way of a corporate age management program. The model comprises a process focusing on retaining and promoting work ability in order to maintain or boost work motivation and health. The host of measures presented serves as a basis to preventively counter demographic change on an individual, interpersonal, and structural level.

Bibliography of publications relating to ground water in Connecticut

USGS Publications Warehouse

Cushman, R.V.

1950-01-01

In 1939, when it became necessary to curtail the work being carried on by the Works Progress Administration, cooperation was arranged between the Federal Ecological Survey and the State Water Commission to continue investigations relative to the over-development of ground-water supplies in the New Haven area. From time to time additional funds have been made available to meet growing demands by the State for data on its ground-water supplied and the present cooperative program between the U.S. Geological Survey and the State Water Commission is a continuation of the original arrangement. It is estimated that about 14 per cont of the State has been covered by recent ground-water surveys and in addition some data are available for another 20 per cent of he State.

U.S. Department of Energy Pacific Region Clean Energy Application Center (PCEAC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lipman, Tim; Kammen, Dan; McDonell, Vince

2013-09-30

The U.S. Department of Energy Pacific Region Clean Energy Application Center (PCEAC) was formed in 2009 by the U.S. Department of Energy (DOE) and the California Energy Commission to provide education, outreach, and technical support to promote clean energy -- combined heat and power (CHP), district energy, and waste energy recovery (WHP) -- development in the Pacific Region. The region includes California, Nevada, Hawaii, and the Pacific territories. The PCEAC was operated as one of nine regional clean energy application centers, originally established in 2003/2004 as Regional Application Centers for combined heat and power (CHP). Under the Energy Independence andmore » Security Act of 2007, these centers received an expanded charter to also promote district energy and waste energy recovery, where economically and environmentally advantageous. The centers are working in a coordinated fashion to provide objective information on clean energy system technical and economic performance, direct technical assistance for clean energy projects and additional outreach activities to end users, policy, utility, and industry stakeholders. A key goal of the CEACs is to assist the U.S. in achieving the DOE goal to ramp up the implementation of CHP to account for 20% of U.S. generating capacity by 2030, which is estimated at a requirement for an additional 241 GW of installed clean technologies. Additional goals include meeting the Obama Administration goal of 40 GW of new CHP by 2020, key statewide goals such as renewable portfolio standards (RPS) in each state, California’s greenhouse gas emission reduction goals under AB32, and Governor Brown’s “Clean Energy Jobs Plan” goal of 6.5 GW of additional CHP over the next twenty years. The primary partners in the PCEAC are the Department of Civil and Environmental Engineering and the Energy and Resources Group (ERG) at UC Berkeley, the Advanced Power and Energy Program (APEP) at UC Irvine, and the Industrial Assessment Centers (IAC) at San Diego State University and San Francisco State University. The center also worked with a wide range of affiliated groups and industry, government, NGO, and academic stakeholders to conduct a series of CHP education and outreach, project technical support, and related activities for the Pacific region. Key PCEAC tasks have included: - Preparing, organizing and conducting educational seminars on various aspects of CHP - Conducting state baseline assessments for CHP - Working with state energy offices to prepare state CHP action plans - Providing technical support services including CHP/district energy project feasibility screenings - Working with state agencies on CHP policy development - Developing additional CHP educational materials The primary specific services that PCEAC has offered include: - A CHP “information clearinghouse “ website: http://www.pacificcleanenergy.org - Site evaluations and potential projects screenings - Assessment of CHP status, potential, and key issues for each state - Information and training workshops - Policy and regulatory guidance documents and other interactions These services were generally offered at no cost to client groups based on the DOE funding and additional activities supported by the California Energy Commission, except for the in-kind staff resources needed to provide input data and support to PCEAC assessments at host sites. Through these efforts, the PCEAC reached thousands of end-users and directly worked with several dozen organizations and potential CHP “host sites” from 2009-2013. The major activities and outcomes of PCEAC project work are described.« less

3D printed polymers toxicity profiling: a caution for biodevice applications

NASA Astrophysics Data System (ADS)

Zhu, Feng; Skommer, Joanna; Friedrich, Timo; Kaslin, Jan; Wlodkowic, Donald

2015-12-01

A recent revolution in additive manufacturing technologies and access to 3D Computer Assisted Design (CAD) software has spurred an explosive growth of new technologies in biomedical engineering. This includes biomodels for diagnosis, surgical training, hard and soft tissue replacement, biodevices and tissue engineering. Moreover, recent developments in high-definition additive manufacturing systems such as Multi-Jet Modelling (MJM) and Stereolithography (SLA), capable of reproducing feature sizes close to 100 μm, promise brand new capabilities in fabrication of optical-grade biomicrofluidic Lab-on-a-Chip and MEMS devices. Compared with other rapid prototyping technologies such as soft lithography and infrared laser micromachining in PMMA, SLA and MJM systems can enable user-friendly production of prototypes, superior feature reproduction quality and comparable levels of optical transparency. Prospectively they can revolutionize fabrication of microfluidic devices with complex geometric features and eliminate the need to use clean room environment and conventional microfabrication techniques. In this work we demonstrate preliminary data on toxicity profiling of a panel of common polymers used in 3D printing applications. The main motivation of our work was to evaluate toxicity profiles of most commonly used polymers using standardized biotests according to OECD guidelines for testing of chemic risk assessment. Our work for the first time provides a multispecies view of potential dangers and limitation for building biocompatible devices using FDM, SLA and MJM additive manufacturing systems. Our work shows that additive manufacturing holds significant promise for fabricating LOC and MEMS but requires caution when selecting systems and polymers due to toxicity exhibited by some 3D printing polymers.

Accounting for the professional work of pathologists performing autopsies.

PubMed

Sinard, John H

2013-02-01

With an increasing trend toward fee-code-based methods of measuring the clinical professional productivity of pathologists, those pathologists whose clinical activities include the performance of autopsies have been disadvantaged by the lack of generally accepted workload equivalents for autopsy performance and supervision. To develop recommended benchmarks to account for this important and often overlooked professional activity. Based on the professional experience of members of the Autopsy Committee of the College of American Pathologists, a survey of autopsy pathologists, and the limited additional material available in the literature, we developed recommended workload equivalents for the professional work associated with performing an autopsy, which we elected to express as multiples of established Current Procedural Terminology codes. As represented in Table 3 , we recommend that the professional work associated with a full adult autopsy be equivalent to 5.5 × 88309-26. Additional professional credit of 1.5 × 88309-26 should be added for evaluation of the brain and for a detailed clinical-pathologic discussion. The corresponding value for a fetal/neonatal autopsy is 4.0 × 88309-26. Although we recognize that autopsy practices vary significantly from institution to institution, it is hoped that our proposed guidelines will be a valuable starting point that individual practices can then adapt, taking into account the specifics of their practice environment.

Development ceramic composites based on Al2O3, SiO2 and IG-017 additive

NASA Astrophysics Data System (ADS)

Kurovics, E.; Shmakova, A.; Kanev, B.; Gömze, L. A.

2017-02-01

Based on high purity alumina and quartz powders and IG-017 bio-original additives the authors have developed new ceramic composite materials for different industrial purposes. The main goal was to fine a material and morphological structures of high performance ceramic composites as frames for development complex materials for extreme consumptions in the future. For this the mixed powders of Al2O3 , SiO2 and IG-017 bio-original additive were uniaxially pressed at different compaction pressures into disc shapes and were sintered in electric kiln under air (1) and nitrogrn (2) atmosphere. The grain size distributions of the raw materials were determined by laser granulometry. There thermo-physical properties were also determined by derivatography. The prepared and sintered specimens were tested on geometrical sizes, microstructure and morphology by scanning electron microscopy, porosity and water absorption. In this work the authors present the results of their research and investigation.

Using formative research to develop a worksite health promotion program for African American women.

PubMed

Zunker, Christie; Cox, Tiffany L; Wingo, Brooks C; Knight, Bern'Nadette; Jefferson, Wendy K; Ard, Jamy D

2008-01-01

To describe the development of a culturally appropriate worksite health promotion program (WHPP) designed to promote increased physical activity and improved nutrition in a high risk group of African American women. The program was based on EatRight, which is a lifestyle-oriented weight control program that focuses on food volume, rather than calories. Formative research included four nominal group technique (NGT) sessions conducted with 14 African American women from the selected worksite to gather input on job factors that affected their weight and daily life factors that affected their amount of physical activity. Their responses were used to adapt existing EatRight materials to target areas of special need for this unique group. Themes emerged from the NGT sessions that indicated stress at work and an environment of unhealthy eating, in addition to social eating and lack of social support for healthy eating added to unhealthy eating patterns at work. In response to physical activity, the primary themes included lack of time to exercise, stress of multiple family roles and responsibilities, and perceived physical barriers to physical activity. Based on the NGT themes, EatRight materials were adapted and additional topics (e.g., increasing social support, overcoming limitations, and time management) were included to develop a WHPP that addressed issues that the participants identified as relevant for their work and home lives. Conducting the NGT sessions and EatRight classes in the work environment, we were able to provide a convenient, familiar environment which fostered social support among participants. We believe that a culturally appropriate modification of EatRight holds great promise in addressing health disparities seen among African American women by offering education on lifestyle changes that will decrease weight through nutrition and physical activity.

Study on AC loss measurements of HTS power cable for standardizing

NASA Astrophysics Data System (ADS)

Mukoyama, Shinichi; Amemiya, Naoyuki; Watanabe, Kazuo; Iijima, Yasuhiro; Mido, Nobuhiro; Masuda, Takao; Morimura, Toshiya; Oya, Masayoshi; Nakano, Tetsutaro; Yamamoto, Kiyoshi

2017-09-01

High-temperature superconducting power cables (HTS cables) have been developed for more than 20 years. In addition of the cable developments, the test methods of the HTS cables have been discussed and proposed in many laboratories and companies. Recently the test methods of the HTS cables is required to standardize and to common in the world. CIGRE made the working group (B1-31) for the discussion of the test methods of the HTS cables as a power cable, and published the recommendation of the test method. Additionally, IEC TC20 submitted the New Work Item Proposal (NP) based on the recommendation of CIGRE this year, IEC TC20 and IEC TC90 started the standardization work on Testing of HTS AC cables. However, the individual test method that used to measure a performance of HTS cables hasn’t been established as world’s common methods. The AC loss is one of the most important properties to disseminate low loss and economical efficient HTS cables in the world. We regard to establish the method of the AC loss measurements in rational and in high accuracy. Japan is at a leading position in the AC loss study, because Japanese researchers have studied on the AC loss technically and scientifically, and also developed the effective technologies for the AC loss reduction. The JP domestic commission of TC90 made a working team to discussion the methods of the AC loss measurements for aiming an international standard finally. This paper reports about the AC loss measurement of two type of the HTS conductors, such as a HTS conductor without a HTS shield and a HTS conductor with a HTS shield. The AC loss measurement method is suggested by the electrical method..

Simplified training for hazardous materials management in developing countries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braithwaite, J.

1994-12-31

There are thousands of dangerous situations happening daily in developing countries around the world involving untrained workers and hazardous materials. There are very few if any agencies in developing countries that are charged with ensuring safe and healthful working conditions. In addition to the problem of regulation and enforcement, there are potential training problems due to the level of literacy and degree of scientific background of these workers. Many of these workers are refugees from poorly developed countries who are willing to work no matter what the conditions. Training methods (standards) accepted as state of the art in the Unitedmore » States and other developed countries may not work well under the conditions found in developing countries. Because these methods may not be appropriate, new and novel ways to train workers quickly, precisely and economically in hazardous materials management should be developed. One approach is to develop training programs that use easily recognizable graphics with minimal verbal instruction, programs similar to the type used to teach universal international driving regulations and safety. The program as outlined in this paper could be tailored to any sized plant and any hazardous material handling or exposure situation. The situation in many developing countries is critical, development of simplified training methods for workers exposed to hazardous materials hold valuable market potential and are an opportunity for many underdeveloped countries to develop indigenous expertise in hazardous materials management.« less

48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

Code of Federal Regulations, 2011 CFR

2011-10-01

... Requirements (AIR)-growth work 1352.271-72 Section 1352.271-72 Federal Acquisition Regulations System... Clauses 1352.271-72 Additional Item Requirements (AIR)—growth work As prescribed in 48 CFR 1371.103, insert the following clause: Additional Item Requirements (Air)—Growth Work (APR 2010) (a) This clause...

46 CFR 167.43-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Additional requirements for hybrid work vests. 167.43-25 Section 167.43-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In...

46 CFR 167.43-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Additional requirements for hybrid work vests. 167.43-25 Section 167.43-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In...

46 CFR 167.43-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Additional requirements for hybrid work vests. 167.43-25 Section 167.43-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In...

46 CFR 167.43-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Additional requirements for hybrid work vests. 167.43-25 Section 167.43-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In...

46 CFR 167.43-25 - Additional requirements for hybrid work vests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Additional requirements for hybrid work vests. 167.43-25 Section 167.43-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Work Vests § 167.43-25 Additional requirements for hybrid work vests. (a) In...

Kinetic modeling of α-hydrogen abstractions from unsaturated and saturated oxygenate compounds by hydrogen atoms.

PubMed

Paraskevas, Paschalis D; Sabbe, Maarten K; Reyniers, Marie-Françoise; Papayannakos, Nikos G; Marin, Guy B

2014-10-09

Hydrogen-abstraction reactions play a significant role in thermal biomass conversion processes, as well as regular gasification, pyrolysis, or combustion. In this work, a group additivity model is constructed that allows prediction of reaction rates and Arrhenius parameters of hydrogen abstractions by hydrogen atoms from alcohols, ethers, esters, peroxides, ketones, aldehydes, acids, and diketones in a broad temperature range (300-2000 K). A training set of 60 reactions was developed with rate coefficients and Arrhenius parameters calculated by the CBS-QB3 method in the high-pressure limit with tunneling corrections using Eckart tunneling coefficients. From this set of reactions, 15 group additive values were derived for the forward and the reverse reaction, 4 referring to primary and 11 to secondary contributions. The accuracy of the model is validated upon an ab initio and an experimental validation set of 19 and 21 reaction rates, respectively, showing that reaction rates can be predicted with a mean factor of deviation of 2 for the ab initio and 3 for the experimental values. Hence, this work illustrates that the developed group additive model can be reliably applied for the accurate prediction of kinetics of α-hydrogen abstractions by hydrogen atoms from a broad range of oxygenates.

Development of construction materials using nano-silica and aggregates recycled from construction and demolition waste.

PubMed

Mukharjee, Bibhuti Bhusan; Barai, Sudhirkumar V

2015-06-01

The present work addresses the development of novel construction materials utilising commercial grade nano-silica and recycled aggregates retrieved from construction and demolition waste. For this, experimental work has been carried out to examine the influence of nano-silica and recycled aggregates on compressive strength, modulus of elasticity, water absorption, density and volume of voids of concrete. Fully natural and recycled aggregate concrete mixes are designed by replacing cement with three levels (0.75%, 1.5% and 3%) of nano-silica. The results of the present investigation depict that improvement in early days compressive strength is achieved with the incorporation of nano-silica in addition to the restoration of reduction in compressive strength of recycled aggregate concrete mixes caused owing to the replacement of natural aggregates by recycled aggregates. Moreover, the increase in water absorption and volume of voids with a reduction of bulk density was detected with the incorporation of recycled aggregates in place of natural aggregates. However, enhancement in density and reduction in water absorption and volume of voids of recycled aggregate concrete resulted from the addition of nano-silica. In addition, the results of the study reveal that nano-silica has no significant effect on elastic modulus of concrete. © The Author(s) 2015.

Does learning to read shape verbal working memory?

PubMed

Demoulin, Catherine; Kolinsky, Régine

2016-06-01

Many experimental studies have investigated the relationship between the acquisition of reading and working memory in a unidirectional way, attempting to determine to what extent individual differences in working memory can predict reading achievement. In contrast, very little attention has been dedicated to the converse possibility that learning to read shapes the development of verbal memory processes. In this paper, we present available evidence that advocates a more prominent role for reading acquisition on verbal working memory and then discuss the potential mechanisms of such literacy effects. First, the early decoding activities might bolster the development of subvocal rehearsal, which, in turn, would enhance serial order performance in immediate memory tasks. In addition, learning to read and write in an alphabetical system allows the emergence of phonemic awareness and finely tuned phonological representations, as well as of orthographic representations. This could improve the quality, strength, and precision of lexical representations, and hence offer better support for the temporary encoding of memory items and/or for their retrieval.

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Top-of-License Nursing Practice: Describing Common Nursing Activities and Nurses' Experiences That Hinder Top-of-License Practice, Part 1.

PubMed

Buck, Jacalyn; Loversidge, Jacqueline; Chipps, Esther; Gallagher-Ford, Lynn; Genter, Lynne; Yen, Po-Yin

2018-05-01

The aims of this study were to describe nurses' perceptions of nursing activities and analyze for consistency with top-of-license (TOL) practice. The Advisory Board Company expert panel proposed 8 TOL core nursing responsibilities representing practice at its potential. Thus far, no empirical work has examined nursing practices relative to TOL, from staff nurses' points of view. This qualitative study used focus groups to explore perceptions of typical nursing activities. We analyzed activities for themes that described nurses' work during typical shifts. Nurses' full scope of work included TOL-consistent categories, as well as categories that did not exemplify TOL practice, such as nonnursing care. A proposed model was developed, which depicts nurses' total scope of work, inclusive of all activity categories. In addition, hindrances to TOL practice were also identified. Findings from this study can inform leadership imperatives and the development of innovative, sustainable nursing practice models that support nursing practice at TOL.

Master plan nurse duty roster using the 0-1 goal programming technique

NASA Astrophysics Data System (ADS)

Ismail, Wan Rosmanira; Jenal, Ruzzakiah

2013-04-01

The scheduling of nurses is particularly challenging because of the nature of the work which is around the clock. In addition, inefficient duty roster can have an effect on the nurses well being as well as their job satisfaction. In nurse scheduling problem (NSP), nurses are generally allocated to periods of work over a specified time horizon. A typical length of the schedule varies from a few weeks to a month. The schedule will be consistently rebuilt after the specified time period and will result in a time-consuming task for the administrative staff involved. Moreover, the task becomes overwhelming when the staff needs to consider the previous duty rosters in order to maintain the quality of schedules. Therefore, this study suggests the development of a master plan for a nurse duty roster for approximately one year. The master plan starts with the development of a blue print for the nurse duty roster using a 0-1 goal programming technique. The appropriate working period for this blue print is formulated based on the number of night shifts and the number of required nurses for night shift per schedule. Subsequently, the blue print is repeated to complete the annual nurse duty roster. These newly developed procedures were then tested on several data sets. The test results found that the master plan has successfully distributed the annual workload evenly among nurses. In addition, the master plan allows nurses to arrange their career and social activities in advance.

Small Payload Launch Integrated Testing Services (SPLITS) - SPSDL

NASA Technical Reports Server (NTRS)

Plotner, Benjamin

2013-01-01

My experience working on the Small Payload Launch Integrated Testing Services project has been both educational and rewarding. I have been given the opportunity to work on and experiment with a number of exciting projects and initiatives, each offering different challenges and opportunities for teamwork and collaboration. One of my assignments is to aid in the design and construction of a small-scale two stage rocket as part of a Rocket University initiative. My duties include programming a microcontroller to control the various sensors on the rocket as well as process and transmit data. Additionally, I am writing a graphical user interface application for the ground station that will receive the transmitted data from the rocket and display the information on screen along with a 3D rendering displaying the rocket orientation. Another project I am working on is to design and develop the avionics that will be used to control a high altitude balloon flight that will test a sensor called a Micro Dosimeter that will measure the total ionizing dose absorbed by electrical components during a flight. This includes assembling and soldering the various sensors and components, programming a microcontroller to input and process data from the Micro Dosimeter, and transmitting the data down to a ground station as well as save the data to an on-board SD card. Additionally, I am aiding in the setup and development of ITOS (Integrated Test and Operations System) capability in the SPSDL (Spaceport Processing System Development Lab).

Developing a Cognitive Training Strategy for First-Episode Schizophrenia: Integrating Bottom-Up and Top-Down Approaches

PubMed Central

Nuechterlein, Keith H.; Ventura, Joseph; Subotnik, Kenneth L.; Hayata, Jacqueline N.; Medalia, Alice; Bell, Morris D.

2014-01-01

It is clear that people with schizophrenia typically have cognitive problems in multiple domains as part of their illness. The cognitive deficits are among the main contributors to limitations in their everyday functioning, including their work recovery. Cognitive remediation has been applied successfully to help people with long-term, persistent schizophrenia to improve their cognitive functioning, but it is only beginning to be applied with individuals who have recently had a first episode of psychosis. Several different approaches to cognitive training have been developed. Some approaches emphasize extensive systematic practice with lower-level cognitive processes and building toward higher-level processes (“bottom-up”), while others emphasize greater focus on high-level cognitive processes that normally integrate and organize lower-level processes (“top-down”). Each approach has advantages and disadvantages for a disorder like schizophrenia, with its multiple levels of cognitive dysfunction. In addition, approaches to cognitive remediation differ in the extent to which they systematically facilitate transfer of learning to everyday functioning. We describe in this article the cognitive training approach that was developed for a UCLA study of people with a recent first episode of schizophrenia, a group that may benefit greatly from early intervention that focuses on cognition and recovery of work functioning. This approach integrated bottom-up and top-down computerized cognitive training and incorporated an additional weekly group session to bridge between computerized training and application to everyday work and school functioning. PMID:25489275

Children's need for favorable acoustics in schools

NASA Astrophysics Data System (ADS)

Nelson, Peggy B.

2003-10-01

Children continue to improve their understanding of speech in noise and reverberation throughout childhood and adolescence. They do not typically achieve adult performance levels until their late teenage years. As a result, schools that are designed to be acoustically adequate for adult understanding may be insufficient for full understanding by young children. In addition, children with hearing loss, those with attention problems, and those learning in a non-native language require even more favorable signal-to-noise ratios. This tutorial will review the literature gathered by the ANSl/ASA working group on classroom acoustics that shaped the recommendations of the working group. Special topics will include speech perception data from typically developing infants and children, from children with hearing loss, and from adults and children listening in a non-native language. In addition, the tutorial will overview recommendations contained within ANSI standard 12.60-2002: Acoustical Performance Criteria, Design Requirements, and Guidelines for Schools. The discussion will also include issues related to designing quiet classrooms and working with local schools and professionals.

Integration of vehicle yaw stabilisation and rollover prevention through nonlinear hierarchical control allocation

NASA Astrophysics Data System (ADS)

Alberding, Matthäus B.; Tjønnås, Johannes; Johansen, Tor A.

2014-12-01

This work presents an approach to rollover prevention that takes advantage of the modular structure and optimisation properties of the control allocation paradigm. It eliminates the need for a stabilising roll controller by introducing rollover prevention as a constraint on the control allocation problem. The major advantage of this approach is the control authority margin that remains with a high-level controller even during interventions for rollover prevention. In this work, the high-level control is assigned to a yaw stabilising controller. It could be replaced by any other controller. The constraint for rollover prevention could be replaced by or extended to different control objectives. This work uses differential braking for actuation. The use of additional or different actuators is possible. The developed control algorithm is computationally efficient and suitable for low-cost automotive electronic control units. The predictive design of the rollover prevention constraint does not require any sensor equipment in addition to the yaw controller. The method is validated using an industrial multi-body vehicle simulation environment.

Space Technology Mission Directorate: Game Changing Development

NASA Technical Reports Server (NTRS)

Gaddis, Stephen W.

2015-01-01

NASA and the aerospace community have deep roots in manufacturing technology and innovation. Through it's Game Changing Development Program and the Advanced Manufacturing Technology Project NASA develops and matures innovative, low-cost manufacturing processes and products. Launch vehicle propulsion systems are a particular area of interest since they typically comprise a large percentage of the total vehicle cost and development schedule. NASA is currently working to develop and utilize emerging technologies such as additive manufacturing (i.e. 3D printing) and computational materials and processing tools that could dramatically improve affordability, capability, and reduce schedule for rocket propulsion hardware.

An Update on the United Nations Millennium Development Goals.

PubMed

Campbell, Della Anne

The United Nations Millennium Development Goals initiative, designed to meet the needs of the world's poorest, ended in 2015. The purpose of this article is to describe the progress made through the Millennium Development Goals and the additional work needed to address vulnerable populations worldwide, especially women and children. A description of the subsequent Sustainable Development Goals, enacted to address the root causes of poverty and the universal need for development for all people, is provided. Copyright © 2017 AWHONN, the Association of Women’s Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights reserved.

Schedule-Aware Workflow Management Systems

NASA Astrophysics Data System (ADS)

Mans, Ronny S.; Russell, Nick C.; van der Aalst, Wil M. P.; Moleman, Arnold J.; Bakker, Piet J. M.

Contemporary workflow management systems offer work-items to users through specific work-lists. Users select the work-items they will perform without having a specific schedule in mind. However, in many environments work needs to be scheduled and performed at particular times. For example, in hospitals many work-items are linked to appointments, e.g., a doctor cannot perform surgery without reserving an operating theater and making sure that the patient is present. One of the problems when applying workflow technology in such domains is the lack of calendar-based scheduling support. In this paper, we present an approach that supports the seamless integration of unscheduled (flow) and scheduled (schedule) tasks. Using CPN Tools we have developed a specification and simulation model for schedule-aware workflow management systems. Based on this a system has been realized that uses YAWL, Microsoft Exchange Server 2007, Outlook, and a dedicated scheduling service. The approach is illustrated using a real-life case study at the AMC hospital in the Netherlands. In addition, we elaborate on the experiences obtained when developing and implementing a system of this scale using formal techniques.

Advancements in mass spectrometry for biological samples: Protein chemical cross-linking and metabolite analysis of plant tissues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, Adam

2015-01-01

This thesis presents work on advancements and applications of methodology for the analysis of biological samples using mass spectrometry. Included in this work are improvements to chemical cross-linking mass spectrometry (CXMS) for the study of protein structures and mass spectrometry imaging and quantitative analysis to study plant metabolites. Applications include using matrix-assisted laser desorption/ionization-mass spectrometry imaging (MALDI-MSI) to further explore metabolic heterogeneity in plant tissues and chemical interactions at the interface between plants and pests. Additional work was focused on developing liquid chromatography-mass spectrometry (LC-MS) methods to investigate metabolites associated with plant-pest interactions.

Fleet Safety: Developing & Sustaining an Effective Program With ANSI/ASSE Z15.1.

PubMed

Hammer, Brian S; Pratt, Stephanie G; Ross, Peggy

2014-03-01

Millions of U.S. workers are at risk for a work-related motor vehicle crash. Fatality data show that across all industries, motor vehicle crashes are consistently the leading cause of work-related fatalities. Of 43,025 work-related fatalities reported by BLS between 2003 and 2010, 10,202 were the result of single- or multiple-vehicle crashes of workers driving or riding in a vehicle on a public roadway, and 2,707 were pedestrian workers struck by a motor vehicle. During the same period, an additional 2,487 workers died in crashes that occurred off a public roadway or on industrial premises (BLS, 2013).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Messer, Bronson; Harris, James A; Parete-Koon, Suzanne T

We describe recent development work on the core-collapse supernova code CHIMERA. CHIMERA has consumed more than 100 million cpu-hours on Oak Ridge Leadership Computing Facility (OLCF) platforms in the past 3 years, ranking it among the most important applications at the OLCF. Most of the work described has been focused on exploiting the multicore nature of the current platform (Jaguar) via, e.g., multithreading using OpenMP. In addition, we have begun a major effort to marshal the computational power of GPUs with CHIMERA. The impending upgrade of Jaguar to Titan a 20+ PF machine with an NVIDIA GPU on many nodesmore » makes this work essential.« less

Parenting and Childhood Chronicity: making visible the invisible work.

PubMed

Ray, Lynne D

2002-12-01

The work required to raise a child with a chronic illness or disability is above and beyond that of raising a typical child. This article presents a model, Parenting and Childhood Chronicity (PACC), that was developed during an interpretive study with 43 parents of 34 children (aged 15 months to 16 years) with various chronic conditions, is presented. "Special needs parenting" describes the additional care that a child needs and includes medical care, parenting plus, and working the systems. "Minimizing consequences" reflects the struggle to balance the rest of family life and includes parenting siblings, maintaining relationships, and keeping yourself going. Copyright 2002, Elsevier Science (USA). All rights reserved.

Simulation of Attacks for Security in Wireless Sensor Network.

PubMed

Diaz, Alvaro; Sanchez, Pablo

2016-11-18

The increasing complexity and low-power constraints of current Wireless Sensor Networks (WSN) require efficient methodologies for network simulation and embedded software performance analysis of nodes. In addition, security is also a very important feature that has to be addressed in most WSNs, since they may work with sensitive data and operate in hostile unattended environments. In this paper, a methodology for security analysis of Wireless Sensor Networks is presented. The methodology allows designing attack-aware embedded software/firmware or attack countermeasures to provide security in WSNs. The proposed methodology includes attacker modeling and attack simulation with performance analysis (node's software execution time and power consumption estimation). After an analysis of different WSN attack types, an attacker model is proposed. This model defines three different types of attackers that can emulate most WSN attacks. In addition, this paper presents a virtual platform that is able to model the node hardware, embedded software and basic wireless channel features. This virtual simulation analyzes the embedded software behavior and node power consumption while it takes into account the network deployment and topology. Additionally, this simulator integrates the previously mentioned attacker model. Thus, the impact of attacks on power consumption and software behavior/execution-time can be analyzed. This provides developers with essential information about the effects that one or multiple attacks could have on the network, helping them to develop more secure WSN systems. This WSN attack simulator is an essential element of the attack-aware embedded software development methodology that is also introduced in this work.

Restraint of children with additional needs in motor vehicles: knowledge and challenges of paediatric occupational therapists in Victoria, Australia.

PubMed

Baker, Anne; Galvin, Jane; Vale, Lisa; Lindner, Helen

2012-02-01

This research project aimed to understand the challenges faced by occupational therapists when making recommendations regarding the restraint of children with additional needs in motor vehicles in Victoria, Australia. A cross-sectional survey design was used to explore current practice in relation to the prescription of motor vehicle restraints in Victoria, Australia. An electronic survey was sent to occupational therapists working with children aged from birth to 18 years in early intervention services, hospitals, schools, community services or private practice.   Challenges faced by occupational therapists related to a lack of knowledge of relevant standards and legal requirements, issues seating children with behavioural difficulties, families' inability to purchase recommended equipment and constraints as a result of funding issues. Further work is required to develop appropriate resources which support occupational therapists to make car seating recommendations for children with additional needs which comply with Australian legal requirements and standards. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

The development of environmental assessment tools to support the creation of dementia friendly care environments: Innovative practice.

PubMed

Waller, Sarah; Masterson, Abigail; Evans, Simon C

2017-02-01

The need for more dementia friendly design in hospitals and other care settings is now widely acknowledged. Working with 26 NHS Trusts in England as part of a Department of Health commissioned programme, The King's Fund developed a set of overarching design principles and an environmental assessment tool for hospital wards in 2012. Following requests from other sectors, additional tools were developed for hospitals, care homes, health centres and housing with care. The tools have proven to be effective in both disseminating the principles of dementia friendly design and in enabling the case to be made for improvements that have a positive effect on patient outcomes and staff morale. This paper reports on the development, use and review of the environmental assessment tools, including further work that is now being taken forward by The Association for Dementia Studies, University of Worcester.

Aerosol Modeling for the Global Model Initiative

NASA Technical Reports Server (NTRS)

Weisenstein, Debra K.; Ko, Malcolm K. W.

2001-01-01

The goal of this project is to develop an aerosol module to be used within the framework of the Global Modeling Initiative (GMI). The model development work will be preformed jointly by the University of Michigan and AER, using existing aerosol models at the two institutions as starting points. The GMI aerosol model will be tested, evaluated against observations, and then applied to assessment of the effects of aircraft sulfur emissions as needed by the NASA Subsonic Assessment in 2001. The work includes the following tasks: 1. Implementation of the sulfur cycle within GMI, including sources, sinks, and aqueous conversion of sulfur. Aerosol modules will be added as they are developed and the GMI schedule permits. 2. Addition of aerosol types other than sulfate particles, including dust, soot, organic carbon, and black carbon. 3. Development of new and more efficient parameterizations for treating sulfate aerosol nucleation, condensation, and coagulation among different particle sizes and types.

OpenCV and TYZX : video surveillance for tracking.

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Jim; Spencer, Andrew; Chu, Eric

2008-08-01

As part of the National Security Engineering Institute (NSEI) project, several sensors were developed in conjunction with an assessment algorithm. A camera system was developed in-house to track the locations of personnel within a secure room. In addition, a commercial, off-the-shelf (COTS) tracking system developed by TYZX was examined. TYZX is a Bay Area start-up that has developed its own tracking hardware and software which we use as COTS support for robust tracking. This report discusses the pros and cons of each camera system, how they work, a proposed data fusion method, and some visual results. Distributed, embedded image processingmore » solutions show the most promise in their ability to track multiple targets in complex environments and in real-time. Future work on the camera system may include three-dimensional volumetric tracking by using multiple simple cameras, Kalman or particle filtering, automated camera calibration and registration, and gesture or path recognition.« less

NASA SPoRT GOES-R Proving Ground Activities

NASA Technical Reports Server (NTRS)

Stano, Geoffrey T.; Fuell, Kevin K.; Jedloec, Gary J.

2010-01-01

The NASA Short-term Prediction Research and Transition (SPoRT) program is a partner with the GOES-R Proving Ground (PG) helping prepare forecasters understand the unique products to come from the GOES-R instrument suite. SPoRT is working collaboratively with other members of the GOES-R PG team and Algorithm Working Group (AWG) scientists to develop and disseminate a suite of proxy products that address specific forecast problems for the WFOs, Regional and National Support Centers, and other NOAA users. These products draw on SPoRT s expertise with the transition and evaluation of products into operations from the MODIS instrument and the North Alabama Lightning Mapping Array (NALMA). The MODIS instrument serves as an excellent proxy for the Advanced Baseline Imager (ABI) that will be aboard GOES-R. SPoRT has transitioned and evaluated several multi-channel MODIS products. The true and false color products are being used in natural hazard detection by several SPoRT partners to provide better observation of land features, such as fires, smoke plumes, and snow cover. Additionally, many of SPoRT s partners are coastal offices and already benefit from the MODIS sea surface temperature composite. This, along with other surface feature observations will be developed into ABI proxy products for diagnostic use in the forecast process as well as assimilation into forecast models. In addition to the MODIS instrument, the NALMA has proven very valuable to WFOs with access to these total lightning data. These data provide situational awareness and enhanced warning decision making to improve lead times for severe thunderstorm and tornado warnings. One effort by SPoRT scientists includes a lightning threat product to create short-term model forecasts of lightning activity. Additionally, SPoRT is working with the AWG to create GLM proxy data from several of the ground based total lightning networks, such as the NALMA. The evaluation will focus on the vastly improved spatial coverage of the GLM, but with the trade-off of lower resolution compared to the NALMA. In addition to the above tasks, SPoRT will make these data available in the NWS next generation display software, AWIPS II. This has already been successfully completed for the two basic GLM proxies. SPoRT will use these products to train forecasters on the capabilities of GOES-R and foster feedback to develop additional products, visualizations, and requirements beneficial to end users needs. These developments and feedback will be made available to the GOES-R Proving Ground for the upcoming 2010 Spring Program in Norman, Oklahoma.

Workgroup report: developing environmental health indicators for European children: World Health Organization Working Group.

PubMed

Pond, Kathy; Kim, Rokho; Carroquino, Maria-Jose; Pirard, Philippe; Gore, Fiona; Cucu, Alexandra; Nemer, Leda; MacKay, Morag; Smedje, Greta; Georgellis, Antonis; Dalbokova, Dafina; Krzyzanowski, Michal

2007-09-01

A working group coordinated by the World Health Organization developed a set of indicators to protect children's health from environmental risks and to support current and future European policy needs. On the basis of identified policy needs, the group developed a core set of 29 indicators for implementation plus an extended set of eight additional indicators for future development, focusing on exposure, health effects, and action. As far as possible, the indicators were designed to use existing information and are flexible enough to be developed further to meet the needs of policy makers and changing health priorities. These indicators cover most of the priority topic areas specified in the Children's Environment and Health Action Plan for Europe (CEHAPE) as adopted in the Fourth Ministerial Conference on Health and Environment in 2004, and will be used to monitor the implementation of CEHAPE. This effort can be viewed as an integral part of the Global Initiative on Children's Environmental Health Indicators, launched at the World Summit on Sustainable Development in 2002.

Drag reduction - Jet breakup correlation with kerosene-based additives

NASA Technical Reports Server (NTRS)

Hoyt, J. W.; Altman, R. L.; Taylor, J. J.

1980-01-01

The drag-reduction effectiveness of a number of high-polymer additives dissolved in aircraft fuel has been measured in a turbulent-flow rheometer. These solutions were further subjected to high elongational stress and breakup forces in a jet discharging in air. The jet was photographed using a high-resolution camera with special lighting. The object of the work was to study the possible spray-suppression ability of high-polymer additives to aircraft fuel and to correlate this with the drag-reducing properties of the additives. It was found, in fact, that the rheometer results indicate the most effective spray-suppressing additives. Using as a measure the minimum polymer concentration to give a maximum friction-reducing effect, the order of effectiveness of eight different polymer additives as spray-suppressing agents was predicted. These results may find application in the development of antimisting additives for aircraft fuel which may increase fire safety in case of crash or accident.

Women swell ranks of working poor.

PubMed

1996-01-01

Despite expanded global female employment (45% of women aged 15-64 years are economically active), women still comprise 70% of the world's 1 billion people living in poverty. Moreover, women's economic activities remain largely confined to low-wage, low-productivity forms of employment. A report by the International Labor Organization (ILO), prepared as a follow-up to the Fourth World Conference on Women and the World Summit for Social Development, identified discrimination in education as a central cause of female poverty and underemployment. Each additional year of schooling is estimated to increase a woman's earnings by 15%, compared to 11% for a man. At the workplace, women face inequalities in terms of hiring and promotion standards, access to training and retraining, access to credit, equal pay for equal work, and participation in economic decision making. In addition, even women in higher-level jobs in developing countries spend 31-42 hours per week in unpaid domestic activities. The ILO has concluded that increasing employment opportunities for women is not a sufficient goal. Required are actions to improve the terms and conditions of such employment, including equal pay for work of equal value, improved occupational safety and health, enhanced security in informal or atypical forms of work, guarantees of freedom of association and the right to organize and bargain collectively, and appropriate maternity protection and child care provisions. Finally, taxation and social welfare policies must be rewritten to accommodate the reality that women are no longer the dependent or secondary earner in families.

The Component Packaging Problem: A Vehicle for the Development of Multidisciplinary Design and Analysis Methodologies

NASA Technical Reports Server (NTRS)

Fadel, Georges; Bridgewood, Michael; Figliola, Richard; Greenstein, Joel; Kostreva, Michael; Nowaczyk, Ronald; Stevenson, Steve

1999-01-01

This report summarizes academic research which has resulted in an increased appreciation for multidisciplinary efforts among our students, colleagues and administrators. It has also generated a number of research ideas that emerged from the interaction between disciplines. Overall, 17 undergraduate students and 16 graduate students benefited directly from the NASA grant: an additional 11 graduate students were impacted and participated without financial support from NASA. The work resulted in 16 theses (with 7 to be completed in the near future), 67 papers or reports mostly published in 8 journals and/or presented at various conferences (a total of 83 papers, presentations and reports published based on NASA inspired or supported work). In addition, the faculty and students presented related work at many meetings, and continuing work has been proposed to NSF, the Army, Industry and other state and federal institutions to continue efforts in the direction of multidisciplinary and recently multi-objective design and analysis. The specific problem addressed is component packing which was solved as a multi-objective problem using iterative genetic algorithms and decomposition. Further testing and refinement of the methodology developed is presently under investigation. Teaming issues research and classes resulted in the publication of a web site, (http://design.eng.clemson.edu/psych4991) which provides pointers and techniques to interested parties. Specific advantages of using iterative genetic algorithms, hurdles faced and resolved, and institutional difficulties associated with multi-discipline teaming are described in some detail.

The solidification velocity of nickel and titanium alloys

NASA Astrophysics Data System (ADS)

Altgilbers, Alex Sho

2002-09-01

The solidification velocity of several Ni-Ti, Ni-Sn, Ni-Si, Ti-Al and Ti-Ni alloys were measured as a function of undercooling. From these results, a model for alloy solidification was developed that can be used to predict the solidification velocity as a function of undercooling more accurately. During this investigation a phenomenon was observed in the solidification velocity that is a direct result of the addition of the various alloying elements to nickel and titanium. The additions of the alloying elements resulted in an additional solidification velocity plateau at intermediate undercoolings. Past work has shown a solidification velocity plateau at high undercoolings can be attributed to residual oxygen. It is shown that a logistic growth model is a more accurate model for predicting the solidification of alloys. Additionally, a numerical model is developed from simple description of the effect of solute on the solidification velocity, which utilizes a Boltzmann logistic function to predict the plateaus that occur at intermediate undercoolings.

Southern California Edison Grid Integration Evaluation: Cooperative Research and Development Final Report, CRADA Number CRD-10-376

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mather, Barry

2015-07-09

The objective of this project is to use field verification to improve DOE’s ability to model and understand the impacts of, as well as develop solutions for, high penetration PV deployments in electrical utility distribution systems. The Participant will work with NREL to assess the existing distribution system at SCE facilities and assess adding additional PV systems into the electric power system.

Description of research interests and current work related to automating software design

NASA Technical Reports Server (NTRS)

Kaindl, Hermann

1992-01-01

Enclosed is a list of selected and recent publications. Most of these publications concern applied research in the areas of software engineering and human-computer interaction. It is felt that domain-specific knowledge plays a major role in software development. Additionally, it is believed that improvements in the general software development process (e.g., object-oriented approaches) will have to be combined with the use of large domain-specific knowledge bases.

Advanced Software Development Workstation Project, phase 3

NASA Technical Reports Server (NTRS)

1991-01-01

ACCESS provides a generic capability to develop software information system applications which are explicitly intended to facilitate software reuse. In addition, it provides the capability to retrofit existing large applications with a user friendly front end for preparation of input streams in a way that will reduce required training time, improve the productivity even of experienced users, and increase accuracy. Current and past work shows that ACCESS will be scalable to much larger object bases.

Upper Minnesota River Subbasins Study (Public Law 87-639). Stage 1. Report Alternatives.

DTIC Science & Technology

1980-01-01

cropland, pasture, range or woodland. This Includes farmsteads, farm roads,*feed lots, fence rowis, wildlife land, and rural nonfarm land. 32...HABITAT 7 EXCESS WATER ON AGRICULTURAL LAND 7 NEED FOR ADDITIONAL RECREATION OPPORTUNITIES 8 WATER SUPPLY NEED 8 NEED TO DEVELOP HYDROELECTRIC POWER 8...installation of works of improvement needed for flood prevention or the conser- vation, development , utilization and disposal of water, and for flood control

Social work role in developing and managing employee assistance programs in health care settings.

PubMed

Foster, Z; Hirsch, S; Zaske, K

1991-01-01

The hospital setting presents special needs for an Employee Assistance Program and special complications for sponsorship, development, and maintenance. What has been learned, how certain problems can be solved or avoided, how responsibility and accountability can be negotiated are presented by a team that has successfully established such a program at a large metropolitan medical center. In addition to successes, some unsolved problems are identified for further study.

The Life Cycle Completed. Extended Version with New Chapters on the Ninth Stage of Development by Joan M. Erikson.

ERIC Educational Resources Information Center

Erikson, Erik H.

This expanded edition of a 1982 book by Erik Erikson summarizes his work on the stages of the human life cycle, including chapters on psychosexuality and the cycle of generations, major stages in psychosocial development, and ego and ethos. An additional chapter on the ninth stage sets forth his philosophy on old age--i.e. the 80s and 90s--and how…

Overview of heat transfer and fluid flow problem areas encountered in Stirling engine modeling

NASA Technical Reports Server (NTRS)

Tew, Roy C., Jr.

1988-01-01

NASA Lewis Research Center has been managing Stirling engine development programs for over a decade. In addition to contractual programs, this work has included in-house engine testing and development of engine computer models. Attempts to validate Stirling engine computer models with test data have demonstrated that engine thermodynamic losses need better characterization. Various Stirling engine thermodynamic losses and efforts that are underway to characterize these losses are discussed.

Translations on Eastern Europe Political, Sociological, and Military Affairs No. 1359.

DTIC Science & Technology

1977-03-01

of the development of productive forces, science and technology and cannot ensure the right to work, an increase in the standard of living and the...winning of international peace and security. In this struggle the chief tool, in addition to political enlight - enment activity, is the organization...development of the trade exchange and to find and utilize new forms of cooperation in the economy, science, technology and culture. Mr Prime Minister

Development of STEP-NC Adaptor for Advanced Web Manufacturing System

NASA Astrophysics Data System (ADS)

Ajay Konapala, Mr.; Koona, Ramji, Dr.

2017-08-01

Information systems play a key role in the modern era of Information Technology. Rapid developments in IT & global competition calls for many changes in basic CAD/CAM/CAPP/CNC manufacturing chain of operations. ‘STEP-NC’ an enhancement to STEP for operating CNC machines, creating new opportunities for collaborative, concurrent, adaptive works across the manufacturing chain of operations. Schemas and data models defined by ISO14649 in liaison with ISO10303 standards made STEP-NC file rich with feature based, rather than mere point to point information of G/M Code format. But one needs to have a suitable information system to understand and modify these files. Various STEP-NC information systems are reviewed to understand the suitability of STEP-NC for web manufacturing. Present work also deals with the development of an adaptor which imports STEP-NC file, organizes its information, allowing modifications to entity values and finally generates a new STEP-NC file to export. The system is designed and developed to work on web to avail additional benefits through the web and also to be part of a proposed ‘Web based STEP-NC manufacturing platform’ which is under development and explained as future scope.

Forecasting supply and demand in nursing professions: impacts of occupational flexibility and employment structure in Germany.

PubMed

Maier, Tobias; Afentakis, Anja

2013-06-05

In light of Germany's ageing society, demand for nursing professionals is expected to increase in the coming years. This will pose a challenge for policy makers to increase the supply of nursing professionals. To portray the different possible developments in the supply of nursing professionals, we projected the supply of formally trained nurses and the potential supply of persons who are able to work in a nursing profession. This potential supply of nursing professionals was calculated on the basis of empirical information on occupational mobility provided by the German Microcensus 2005 (Labour Force Survey). We also calculated how the supply of full-time equivalents (FTEs) will develop if current employment structures develop in the direction of employment behaviour in nursing professions in eastern and western Germany. We then compared these different supply scenarios with two demand projections ('status quo' and 'compression of morbidity' scenarios) from Germany's Federal Statistical Office. Our results show that, even as early as 2005, meeting demand for FTEs in nursing professions was not arithmetically possible when only persons with formal qualification in a nursing profession were taken into account on the supply side. When additional semi-skilled nursing professionals are included in the calculation, a shortage of labour in nursing professions can be expected in 2018 when the employment structure for all nursing professionals remains the same as the employment structure seen in Germany in 2005 (demand: 'status quo scenario'). Furthermore, given an employment structure as in eastern Germany, where more nursing professionals work on a full-time basis with longer working hours, a theoretical shortage of nursing professionals could be delayed until 2024. Our analysis of occupational flexibility in the nursing field indicates that additional potential supply could be generated by especially training more young people for a nursing profession as they tend to stay in their initial occupation. Furthermore, the number of FTEs in nursing professions could be increased by promoting more full-time contracts in Western Germany. Additionally, employment contracts for just a small number of weekly working hours (marginal employment) cannot be considered an adequate instrument for keeping formally trained nursing professionals employed in the nursing field.

Efficacy of work-based training for direct care workers in assisted living.

PubMed

White, Diana L; Cadiz, David M

2013-01-01

This article reports on the efficacy of a work-based learning program for direct care workers in assisted living. The program goal was to improve skills and facilitate career development. The training program had positive impacts at both individual and organizational levels. Survey data found that workers felt more competent and self-confident about their abilities to work with residents. Furthermore, increasing satisfaction with the training program over time led to greater job satisfaction and a desire for additional education. Organizations have better outcomes when workers are well trained, feel empowered, and are satisfied with their work. Policy implications for assisted living settings and meeting the growing demand for a competent direct care workforce are discussed.

SOI-CMOS Process for Monolithic, Radiation-Tolerant, Science-Grade Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, George; Lee, Adam

In Phase I, Voxtel worked with Jazz and Sandia to document and simulate the processes necessary to implement a DH-BSI SOI CMOS imaging process. The development is based upon mature SOI CMOS process at both fabs, with the addition of only a few custom processing steps for integration and electrical interconnection of the fully-depleted photodetectors. In Phase I, Voxtel also characterized the Sandia process, including the CMOS7 design rules, and we developed the outline of a process option that included a “BOX etch”, that will permit a “detector in handle” SOI CMOS process to be developed The process flows weremore » developed in cooperation with both Jazz and Sandia process engineers, along with detailed TCAD modeling and testing of the photodiode array architectures. In addition, Voxtel tested the radiation performance of the Jazz’s CA18HJ process, using standard and circular-enclosed transistors.« less

The forgotten realm of the new and emerging psychosocial risk factors.

PubMed

Chirico, Francesco

2017-09-28

In Europe, employers of all private and public enterprises have a legal obligation to protect their employers by all the different types of workplace hazards to the safety and health of workers. The most important methods developed for the work-related stress risk assessment are based on the Cox's research commissioned by European Agency for Safety and Health at Work (EU-OSHA) and are the Management Standard HSE for work-related stress in United Kingdom, the START method in Germany, the Screening, Observation, Analysis, Expertise (SOBANE) in Belgium, and the National Institute for Prevention and Safety at Work (INAIL-ISPESL) model in Italy, the latter based on the British Management Standard. Unfortunately, the definition of "work-related stress" elaborated by EU-OSHA was criticized, because it is not completely equal to the broader "psychosocial risk," which includes new and emerging psychosocial risk factors, such as the combined exposure to physical and psychosocial risks, job insecurity, work intensification and high demands at work, high emotional load related to burnout, work-life balance problems, and violence and harassment at work. All these new emerging psychosocial hazards could require different and additional methodologies to save workers' health and safety. For this reason, the concept that stakeholders and policy makers should keep in mind in order to develop better national regulations and strategies is that work-related stress risk and psychosocial risk factors are not the same.

Do work ability and job involvement channel later personal goals in retirement? An 11-year follow-up study.

PubMed

Feldt, Taru; Hyvönen, Katriina; Oja-Lipasti, Terhi; Kinnunen, Ulla; Salmela-Aro, Katariina

2012-07-01

The present study investigates the role of work ability and job involvement in personal life goals later in retirement. The study is based on longitudinal research on Finnish employees working in managerial positions. At the study baseline (in 1996), 120 employed managers responded to a questionnaire regarding their work ability and job involvement, and 11 years later (in 2007) when they were retired, they responded to an open-ended question regarding their personal goals. The retired participants were 58-76 years old (M = 66 years), and they had been retired for 1-10 years (M = 4.3 years, SD = 2.9). On the basis of the participants' responses to the open-ended question, six main content categories of personal goals were formed. According to these categories, the personal goals in retirement focused on (1) hobbies and leisure time, (2) social relationships, (3) health and well-being, (4) housing and finance, (5) self-development and ideology, and (6) other activities. The managers with better work ability and job involvement at the baseline of the study had fewer personal goals related to health and well-being later in retirement. In addition, better work ability predicted more personal goals related to self-development and ideology views. The preceding work ability and job involvement seem to channel personal goal pursuit in retirement. Thus, sustaining employees' work ability and job involvement are not only essential for developing employees' ability to cope with work demands but also for their functional capacity in their later stages of life, such as in retirement.

Robert Bartini and His Contribution to the Development of Transport and Aviation

NASA Astrophysics Data System (ADS)

Težak, Sergej

2017-10-01

After the First World War, the young Soviet Union (USSR) desperately needed new engineers and scientists who would provide the new country with development of modern industry and transportation. At that time, Western European countries had knowledge and experience, especially in the field of aviation. One of the young engineers was Robert Bartini, who was educated in Austria-Hungary and Italy, and graduated from Milan Polytechnic Institute. In 1923, he fled Italy to escape Fascists and emigrated in Soviet Union. This article is a brief description of aircraft designer Robert Bartini and his role in the development of the military, passenger and transport aviation. In addition, it presents his vision of the intercontinental and continental high-speed transport, which was his focus in the last years of his work and creation. He worked as a researcher and expert in the former Soviet Union, therefore, more detailed and relevant information on his work has been revealed to the public in recent years. In Russia, he is very popular as a researcher and developer. There are many books about him in Russian and Italian language, but not in English. Thus, his work is still quite unknown in the West. He was born in Kanjiza (today Serbia) in 1897, and spent his youth in Fiume (Rijeka, today Croatia).

Mediation of adoption and use: a key strategy for mitigating unintended consequences of health IT implementation.

PubMed

Novak, Laurie L; Anders, Shilo; Gadd, Cynthia S; Lorenzi, Nancy M

2012-01-01

Without careful attention to the work of users, implementation of health IT can produce new risks and inefficiencies in care. This paper uses the technology use mediation framework to examine the work of a group of nurses who serve as mediators of the adoption and use of a barcode medication administration (BCMA) system in an inpatient setting. The study uses ethnographic methods to explore the mediators' work. Data included field notes from observations, documents, and email communications. This variety of sources enabled triangulation of findings between activities observed, discussed in meetings, and reported in emails. Mediation work integrated the BCMA tool with nursing practice, anticipating and solving implementation problems. Three themes of mediation work include: resolving challenges related to coordination, integrating the physical aspects of BCMA into everyday practice, and advocacy work. Previous work suggests the following factors impact mediation effectiveness: proximity to the context of use, understanding of users' practices and norms, credibility with users, and knowledge of the technology and users' technical abilities. We describe three additional factors observed in this case: 'influence on system developers,' 'influence on institutional authorities,' and 'understanding the network of organizational relationships that shape the users' work.' Institutionally supported clinicians who facilitate adoption and use of health IT systems can improve the safety and effectiveness of implementation through the management of unintended consequences. Additional research on technology use mediation can advance the science of implementation by providing decision-makers with theoretically durable, empirically grounded evidence for designing implementations.

U.S. Geological Survey Science for the Wyoming Landscape Conservation Initiative-2010 Annual Report

USGS Publications Warehouse

Bowen, Zachary H.; Aldridge, Cameron L.; Anderson, Patrick J.; Assal, Timothy J.; Biewick, Laura; Blecker, Steven W.; Boughton, Gregory K.; Bristol, R. Sky; Carr, Natasha B.; Chalfoun, Anna D.; Chong, Geneva W.; Clark, Melanie L.; Diffendorfer, Jay E.; Fedy, Bradley C.; Foster, Katharine; Garman, Steven L.; Germaine, Stephen S.; Holloway, JoAnn; Homer, Collin G.; Kauffman, Matthew J.; Keinath, Douglas; Latysh, Natalie; Manier, Daniel J.; McDougal, Robert R.; Melcher, Cynthia P.; Miller, Kirk A.; Montag, Jessica; Potter, Christopher J.; Schell, Spencer; Shafer, Sarah L.; Smith, David B.; Stillings, Lisa L.; Tuttle, Michele L.W.; Wilson, Anna B.

2011-01-01

This is the third report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual work activities. The first report described activities for 2007 and 2008, and the second report covered work activities for FY09. This third report covers work activities conducted in FY2010, and it continues the 2009 approach of reporting on all the individual activities to help give WLCI partners and other readers the full scope of what has been accomplished. New in this year's report is an additional section for each work activity that outlines the work planned for the following fiscal year. In FY2010, there were 35 ongoing/expanded, completed, or new projects conducted under the five major multi-disciplinary science and technical-assistance activities: (1) Baseline Synthesis; (2) Targeted Monitoring and Research; (3) Data and Information Management; (4) Integration and Coordination; and (5) Decisionmaking and Evaluation. The three new work activities were to (1) compile existing water data for the entire WLCI region and (2) develop regional curves (statistical models) for relating bankfull-channel geometry and discharge to drainages in the WLCI region, both of which will help guide long-term monitoring of water resources; and (3) initiate a groundwater-monitoring network to evaluate potential effects of energy-development activities on groundwater quality where groundwater is an important source of public/private water supplies. Results of the FY2009 work to develop methods for assessing soil organic matter and mercury indicated that selenium and arsenic levels may be elevated in the Muddy Creek Basin; thus, the focus of that activity was shifted in FY2010 to evaluate biogeochemical cycling of elements in the basin. In FY2010, two ongoing activities were expanded with the addition of more sampling plots: (a) the study of how greater sage-grouse (Centrocercus urophasianus) use vegetation-treatment areas (sites added to the Moxa Arch Natural Gas Development area) and (2) the study of cheatgrass (Bromus tectorum) occurrence in burn treatments of the Little Mountain Ecosystem. The activity that entails evaluating relationships between ungulate herbivory and fire on aspen (Populus tremuloides) recruitment also was expanded to include relationships between stand characteristics of and herbivory on aspen in various ecohydrological settings. The USGS continued compiling data and developing geospatial products from all of its WLCI activities to support (1) ranking and prioritizing of proposed conservation projects, (2) developing the WLCI Integrated Assessment, and (3) developing the WLCI 5-year Conservation Action Plan. Two activities were completed in FY2010: (1) the conceptual modeling and indicator selection for monitoring resource conditions across the WLCI region, and (2) the literature review on effects of oil and gas development in western regions of the United States, both of which are in the last stages of publication.

Maternal Employment and Parenting Through Middle Childhood: Contextualizing Factors

PubMed Central

Buehler, Cheryl; O’Brien, Marion; Swartout, Kevin M.; Zhou, Nan

2014-01-01

The authors used data from the National Institute of Child Health and Human Development Study of Early Child Care and Youth Development (N = 1,364) to examine maternal work hour status and parenting (sensitivity and learning opportunities) from infancy through middle childhood. Work hour status was conceptualized as nonemployment, part time, and full time. Adjusting for covariates, mothers employed part time had higher sensitivity scores and higher provision of child learning opportunity scores than did mothers who were not employed, and these differences characterized families during early childhood rather than middle childhood. Mothers’ provision of child learning opportunities was greater when employed full time (vs. part time) during early childhood. In addition to child age, mothers’ ethnic minority status and partner status moderated the association between maternal work hour status and mothers’ parenting. In general, the findings supported ideas forwarded by role expansionist theory. PMID:25530631

Hexagonalization of correlation functions II: two-particle contributions

NASA Astrophysics Data System (ADS)

Fleury, Thiago; Komatsu, Shota

2018-02-01

In this work, we compute one-loop planar five-point functions in N=4 super-Yang-Mills using integrability. As in the previous work, we decompose the correlation functions into hexagon form factors and glue them using the weight factors which depend on the cross-ratios. The main new ingredient in the computation, as compared to the four-point functions studied in the previous paper, is the two-particle mirror contribution. We develop techniques to evaluate it and find agreement with the perturbative results in all the cases we analyzed. In addition, we consider next-to-extremal four-point functions, which are known to be protected, and show that the sum of one-particle and two-particle contributions at one loop adds up to zero as expected. The tools developed in this work would be useful for computing higher-particle contributions which would be relevant for more complicated quantities such as higher-loop corrections and non-planar correlators.

Occupational health services for shift and night workers.

PubMed

Koller, M

1996-02-01

It is important for an occupational health service to plan health supervision and measures for shift and night workers considering the biorhythmic and psychosocial desynchronisation, as well as the frequent prevalence of combined effects of adverse environmental and working conditions. The measures taken should be preventive to reduce the expected health risks rather than being rehabilitative. Both a medical surveillance and a counselling service are recommended before and during engagement in shift and night work. Sleep, digestive, metabolic and cardiovascular troubles should be noted and followed up. Medical counselling is especially necessary in the first months of shift and night work exposure and then after long-term exposure. The postulate for timed surveillance and intervention is supported by data of our epidemiologic investigations. The importance of the single health measures is underlined by direct reference to the relevant literature. Recommendations that should be applied in all countries and enterprises are in accordance with the ILO Night Work Convention 1990a and include: (1) appropriate occupational health services provided for night and shift workers, including counselling; (2) first aid facilities during all shift hours; (3) the option of transfer to day work when certified unfit for night work for reasons of health; and (4) measures for women on night shifts, in particular special maternity protection (transfer to day work, social security benefits or an extension of maternity leave). Examples of occupational health services already installed in some states for shift and night workers, and information on future developments are given. Up to now the medical service has been implemented mostly on the basis of collective agreements rather than on the basis of legal provisions. The Austrian Night Shift/Heavy Work Law Regulations of 1981, revised 1993, are cited: workers exposed to night shifts under defined single or combined additional heavy workloads are entitled to a special health assessment, additional rest pauses, additional free time and early retirement depending on years of exposure.

The development of future thinking: young children's ability to construct event sequences to achieve future goals.

PubMed

Prabhakar, Janani; Hudson, Judith A

2014-11-01

Previous studies suggest that the ability to think about and act on the future emerges between 3 and 5 years of age. However, it is unclear what underlying processes change during the development of early future-oriented behavior. We report three experiments that tested the emergence of future thinking ability through children's ability to explicitly maintain future goals and construct future scenarios. Our main objectives were to examine the effects of goal structure and the effects of working memory demands on children's ability to construct future scenarios and make choices to satisfy future goals. The results indicate that 4-year-olds were able to successfully accomplish two temporally ordered goals even with high working memory demands and a complex goal structure, whereas 3-year-olds were able to accomplish two goals only when the working memory demands were low and the goal structure did not involve additional demands from inferential reasoning and contingencies between the temporally ordered goals. Results are discussed in terms of the development of future thinking in conjunction with working memory, inferential reasoning ability, and goal maintenance abilities. Copyright © 2014. Published by Elsevier Inc.

In-Silico Genomic Approaches To Understanding Lactation, Mammary Development, And Breast Cancer

USDA-ARS?s Scientific Manuscript database

Lactation-related traits are influenced by genetics. From a quantitative standpoint, these traits have been well studied in dairy species, but there has also been work on the genetics of lactation in humans and mice. In addition, there is evidence to support the notion that other mammary gland trait...

Johnson Space Center Overview

NASA Technical Reports Server (NTRS)

Gafka, Tammy; Terrier, Doug; Smith, James

2011-01-01

This slide presentation is a review of the work of Johnson Space Center. It includes a section on technology development areas, (i.e., composite structures, non-destructive evaluation, applied nanotechnology, additive manufacturing, and fracture and fatigue analytical methods), a section on structural analysis capabilities within NASA/JSC and a section on Friction stir welding and laser peening.

Workplace Literacy in the 90's: Definitions, Descriptions, Opportunities, and Cautions.

ERIC Educational Resources Information Center

Garay, Mary Sue

The globalization of business has influenced the development of customized, job-specific workplace literacy programs. Work-centered participatory literacy receives support from both business and labor and additional impetus from the National Literacy Act of 1991. The worker of the future will be a thinking and communicating problem solver. The…

POSTWEANING EXPOSURE TO GOSSYPOL RESULTS IN EPIDIDYMIS-SPECIFIC EFFECTS THROUGHOUT PUBERTY AND ADULTHOOD IN RATS

EPA Science Inventory

Gossypol, a yellow pigment found in cottonseeds, well known for its antifertility properties in animals, has been used as a contraceptive by men. The aims of this work were to evaluate the effects of gossypol throughout sexual development of male rats and to provide additional da...

Collection Development: Our World of Work

ERIC Educational Resources Information Center

Easton, Bonnie

2010-01-01

The current recession has hit American workers hard. According to the Bureau of Labor Statistics, ten percent of the U.S. workforce is unemployed (as of November 2009), the highest rate since April 1983. In addition, the labor market is experiencing record rates in the length of time job hunters remain unemployed, while companies receive hundreds…

Developing Curriculum: Knowledge and Skills Essential for an International Salesforce.

ERIC Educational Resources Information Center

Ruhland, Sheila K.

A study explored the additional knowledge and skills an international salesforce needs based upon 95 respondents from Wisconsin manufacturing companies. Six areas were evaluated by sales representatives involved with international sales and marketing to identify the education and training needed within the next 3 years by the work force. Four…

Load Modeling and Forecasting | Grid Modernization | NREL

Science.gov Websites

Load Modeling and Forecasting Load Modeling and Forecasting NREL's work in load modeling is focused resources (such as rooftop photovoltaic systems) and changing customer energy use profiles, new load models distribution system. In addition, NREL researchers are developing load models for individual appliances and

Professional versus Occupational Models of Work Competence

ERIC Educational Resources Information Center

Lester, Stan

2014-01-01

In addition to the familiar occupational standards that underpin National Vocational Qualifications, the UK has a parallel if less complete system of competence or practice standards that are developed and controlled by professional bodies. While there is a certain amount of overlap between the two types of standard, recent research points to a…

Recent Developments in Intergenerational Mobility. NBER Working Paper No. 15889

ERIC Educational Resources Information Center

Black, Sandra E.; Devereux, Paul J.

2010-01-01

Economists and social scientists have long been interested in intergenerational mobility, and documenting the persistence between parents and children's outcomes has been an active area of research. However, since Gary Solon's 1999 Chapter in the Handbook of Labor Economics, the literature has taken an interesting turn. In addition to focusing on…

Financing Education in a Climate of Change. Eighth Edition.

ERIC Educational Resources Information Center

Brimley, Vern, Jr.; Garfield, Rulon R.

Since the publication of the seventh edition of this textbook in 1999, there have been many new developments in the education finance arena. Those changes are discussed in this eighth edition. Additional new material includes Internet resources, new exercises for further "laboratory" work, updated figures and tables, and fresh information on court…

Personality Factors and Achievement Motivation of Women in Higher Education Administration.

ERIC Educational Resources Information Center

Lester, Patricia; Chu, Lily

Female and male higher education administrators in Texas and New Mexico were compared in terms of their sex role orientation, motivational factors, and administrative styles. In addition to individual interviews of the 68 administrators, a questionnaire was developed that included items from the Bem Sex Role Inventory, Work and Family Orientation…

Effective Engineering Presentations through Teaching Visual Literacy Skills.

ERIC Educational Resources Information Center

Kerns, H. Dan; And Others

This paper describes a faculty resource team in the Bradley University (Illinois) Department of Industrial Engineering that works with student project teams in an effort to improve their visualization and oral presentation skills. Students use state of the art technology to develop and display their visuals. In addition to technology, students are…

Problem Solving in Social Studies: Concepts and Critiques.

ERIC Educational Resources Information Center

Van Sickle, Ronald L.; Hoge, John D.

Recent developments in the field of cognitive psychology, particularly in the area of information processing, have shed light on the way people think in order to make decisions and solve problems. In addition, cooperative learning research has provided evidence of the effectiveness of cooperatively structured group work aimed at problem solving.…

Additive manufacturing of scaffolds with dexamethasone controlled release for enhanced bone regeneration.

PubMed

Costa, Pedro F; Puga, Ana M; Díaz-Gomez, Luis; Concheiro, Angel; Busch, Dirk H; Alvarez-Lorenzo, Carmen

2015-12-30

The adoption of additive manufacturing in tissue engineering and regenerative medicine (TERM) strategies greatly relies on the development of novel 3D printable materials with advanced properties. In this work we have developed a material for bone TERM applications with tunable bioerosion rate and dexamethasone release profile which can be further employed in fused deposition modelling (the most common and accessible 3D printing technology in the market). The developed material consisted of a blend of poly-ϵ-caprolactone (PCL) and poloxamine (Tetronic®) and was processed into a ready-to-use filament form by means of a simplified melt-based methodology, therefore eliminating the utilization of solvents. 3D scaffolds composed of various blend formulations were additively manufactured and analyzed revealing blend ratio-specific degradation rates and dexamethasone release profiles. Furthermore, in vitro culture studies revealed a similar blend ratio-specific trend concerning the osteoinductive activity of the fabricated scaffolds when these were seeded and cultured with human mesenchymal stem cells. The developed material enables to specifically address different regenerative requirements found in various tissue defects. The versatility of such strategy is further increased by the ability of additive manufacturing to accurately fabricate implants matching any given defect geometry. Copyright © 2015 Elsevier B.V. All rights reserved.

Filament Breakage Monitoring in Fused Deposition Modeling Using Acoustic Emission Technique

PubMed Central

Jin, Li; Yan, Youruiling; Mei, Yiming

2018-01-01

Polymers are being used in a wide range of Additive Manufacturing (AM) applications and have been shown to have tremendous potential for producing complex, individually customized parts. In order to improve part quality, it is essential to identify and monitor the process malfunctions of polymer-based AM. The present work endeavored to develop an alternative method for filament breakage identification in the Fused Deposition Modeling (FDM) AM process. The Acoustic Emission (AE) technique was applied due to the fact that it had the capability of detecting bursting and weak signals, especially from complex background noises. The mechanism of filament breakage was depicted thoroughly. The relationship between the process parameters and critical feed rate was obtained. In addition, the framework of filament breakage detection based on the instantaneous skewness and relative similarity of the AE raw waveform was illustrated. Afterwards, we conducted several filament breakage tests to validate their feasibility and effectiveness. Results revealed that the breakage could be successfully identified. Achievements of the present work could be further used to develop a comprehensive in situ FDM monitoring system with moderate cost. PMID:29494559

Modeling Off-Nominal Behavior in SysML

NASA Technical Reports Server (NTRS)

Day, John; Donahue, Kenny; Ingham, Mitch; Kadesch, Alex; Kennedy, Kit; Post, Ethan

2012-01-01

Fault Management is an essential part of the system engineering process that is limited in its effectiveness by the ad hoc nature of the applied approaches and methods. Providing a rigorous way to develop and describe off-nominal behavior is a necessary step in the improvement of fault management, and as a result, will enable safe, reliable and available systems even as system complexity increases... The basic concepts described in this paper provide a foundation to build a larger set of necessary concepts and relationships for precise modeling of off-nominal behavior, and a basis for incorporating these ideas into the overall systems engineering process.. The simple FMEA example provided applies the modeling patterns we have developed and illustrates how the information in the model can be used to reason about the system and derive typical fault management artifacts.. A key insight from the FMEA work was the utility of defining failure modes as the "inverse of intent", and deriving this from the behavior models.. Additional work is planned to extend these ideas and capabilities to other types of relevant information and additional products.

Process development for green part printing using binder jetting additive manufacturing

NASA Astrophysics Data System (ADS)

Miyanaji, Hadi; Orth, Morgan; Akbar, Junaid Muhammad; Yang, Li

2018-05-01

Originally developed decades ago, the binder jetting additive manufacturing (BJ-AM) process possesses various advantages compared to other additive manufacturing (AM) technologies such as broad material compatibility and technological expandability. However, the adoption of BJ-AM has been limited by the lack of knowledge with the fundamental understanding of the process principles and characteristics, as well as the relatively few systematic design guideline that are available. In this work, the process design considerations for BJ-AM in green part fabrication were discussed in detail in order to provide a comprehensive perspective of the design for additive manufacturing for the process. Various process factors, including binder saturation, in-process drying, powder spreading, powder feedstock characteristics, binder characteristics and post-process curing, could significantly affect the printing quality of the green parts such as geometrical accuracy and part integrity. For powder feedstock with low flowability, even though process parameters could be optimized to partially offset the printing feasibility issue, the qualities of the green parts will be intrinsically limited due to the existence of large internal voids that are inaccessible to the binder. In addition, during the process development, the balanced combination between the saturation level and in-process drying is of critical importance in the quality control of the green parts.

Perspective: creating an ethical workplace: reverberations of resident work hours reform.

PubMed

Lopez, Lenny; Katz, Joel T

2009-03-01

Medical professionals are a community of highly educated individuals with a commitment to a core set of ideals and principles. This community provides both technical and ethical socialization. The development of ethical physicians is highly linked to experiences in the training period. Moral traits are situation-sensitive psychological and behavioral dispositions. The consequence of long duty hours on the moral development of physicians is less understood. The clinical environment of medical training programs can be so intense as to lead to conditions that may actually deprofessionalize trainees. The dynamic relationship between individual character traits and the situational dependence of their expression suggests that a systems approach will help promote and nurture moral development. Ethical behavior can be supported by systems that make it more difficult to veer from the ideal. Work hours limits are a structural change that will help preserve public safety by preventing physicians from taking the moral shortcuts that can occur with increasing work and time pressures. Work hours rules are beneficial but insufficient to optimize an ethical work and training environment. Additional measures need to be put in place to ensure that ethical tensions are not created between the patient's well-being and the resident's adherence to work hours rules. The ethical ideals of physician autonomy, selflessness, and accountability to the patient must be protected through the judicious and flexible use of work hours limits, physician extenders, census caps, nonteaching services, and high-quality handoffs.

Characterizing and Mitigating Work Time Inflation in Task Parallel Programs

DOE PAGES

Olivier, Stephen L.; de Supinski, Bronis R.; Schulz, Martin; ...

2013-01-01

Task parallelism raises the level of abstraction in shared memory parallel programming to simplify the development of complex applications. However, task parallel applications can exhibit poor performance due to thread idleness, scheduling overheads, and work time inflation – additional time spent by threads in a multithreaded computation beyond the time required to perform the same work in a sequential computation. We identify the contributions of each factor to lost efficiency in various task parallel OpenMP applications and diagnose the causes of work time inflation in those applications. Increased data access latency can cause significant work time inflation in NUMA systems.more » Our locality framework for task parallel OpenMP programs mitigates this cause of work time inflation. Our extensions to the Qthreads library demonstrate that locality-aware scheduling can improve performance up to 3X compared to the Intel OpenMP task scheduler.« less

Improving return-to-work after childbirth: design of the Mom@Work study, a randomised controlled trial and cohort study.

PubMed

Stomp-van den Berg, Suzanne G M; van Poppel, Mireille N M; Hendriksen, Ingrid J M; Bruinvels, David J; Uegaki, Kimi; de Bruijne, Martine C; van Mechelen, Willem

2007-03-29

Many women suffer from health problems after giving birth, which can lead to sick leave. About 30% of Dutch workers are on sick leave after maternity leave. Structural contact of supervisors with employees on maternity leave, supported by early medical advice of occupational physicians, may increase the chances of return-to-work after maternity leave. In addition, to understand the process of sick leave and return-to-work after childbirth it is important to gain insight into which factors hinder return-to-work after childbirth, as well, as which prognostic factors lead to the development of postpartum health complaints. In this paper, the design of the Mom@Work study is described. The Mom@Work study is simultaneously a randomised controlled trial and a cohort study. Pregnant women working for at least 12 hours a week at one of the 15 participating companies are eligible to participate. The supervisors of these pregnant employees are randomised at 35 weeks pregnancy into the intervention group or control group. During maternity leave, supervisors in the intervention group contact their employee six weeks after delivery using a structured interview. When employees do not expect to return to their jobs at the end of their scheduled maternity leave due to health problems, the supervisor offers early support of the occupational physician. Supervisors in the control group have no structural contact with their employees during maternity leave. Measurements take place at 30 weeks pregnancy and at 6, 12, 24 and 52 weeks postpartum. In addition, cost data are collected. For the RCT, primary outcome measures are sick leave and return-to-work, and secondary outcome measures are costs, health, satisfaction with intervention and global feelings of recovery. Outcome measures for the cohort are pregnancy-related pelvic girdle pain, fatigue and depression. Finally, a number of prognostic factors for return-to-work and for the development of complaints will be measured. The Mom@Work study will provide important information about return-to-work of employees after giving birth. Results will give insight in prognosis of postpartum sick leave and complaints. Also, the role of supervisors and occupational physicians in successful return-to-work after childbirth will be clarified.

High performance polymer development

NASA Technical Reports Server (NTRS)

Hergenrother, Paul M.

1991-01-01

The term high performance as applied to polymers is generally associated with polymers that operate at high temperatures. High performance is used to describe polymers that perform at temperatures of 177 C or higher. In addition to temperature, other factors obviously influence the performance of polymers such as thermal cycling, stress level, and environmental effects. Some recent developments at NASA Langley in polyimides, poly(arylene ethers), and acetylenic terminated materials are discussed. The high performance/high temperature polymers discussed are representative of the type of work underway at NASA Langley Research Center. Further improvement in these materials as well as the development of new polymers will provide technology to help meet NASA future needs in high performance/high temperature applications. In addition, because of the combination of properties offered by many of these polymers, they should find use in many other applications.

Space Weather Action Plan Solar Radio Burst Phase 1 Benchmarks and the Steps to Phase 2

NASA Astrophysics Data System (ADS)

Biesecker, D. A.; White, S. M.; Gopalswamy, N.; Black, C.; Love, J. J.; Pierson, J.

2017-12-01

Solar radio bursts, when at the right frequency and when strong enough, can interfere with radar, communication, and tracking signals. In severe cases, radio bursts can inhibit the successful use of radio communications and disrupt a wide range of systems that are reliant on Position, Navigation, and Timing services on timescales ranging from minutes to hours across wide areas on the dayside of Earth. The White House's Space Weather Action Plan asked for solar radio burst intensity benchmarks for an event occurrence frequency of 1 in 100 years and also a theoretical maximum intensity benchmark. The benchmark team has developed preliminary (phase 1) benchmarks for the VHF (30-300 MHz), UHF (300-3000 MHz), GPS (1176-1602 MHz), F10.7 (2800 MHz), and Microwave (4000-20000) bands. The preliminary benchmarks were derived based on previously published work. Limitations in the published work will be addressed in phase 2 of the benchmark process. In addition, deriving theoretical maxima requires additional work, where it is even possible to, in order to meet the Action Plan objectives. In this presentation, we will present the phase 1 benchmarks, the basis used to derive them, and the limitations of that work. We will also discuss the work that needs to be done to complete the phase 2 benchmarks.

Stress measurements in Kuzbass mines using photoelastic sensors

NASA Astrophysics Data System (ADS)

Schastlivtsev, E.

1996-06-01

The basic amount of known measurements of stressed state in front of development workings' faces was carried out with the use of hydraulic sensors, which give an information about principal stresses without their separation. Besides, the availability of pipe-line and cumbersome equipment make more complicated and sometimes impossible the process of stresses' measurements during works in mining process. In our opinion, the borehole and photoelastic sensors at high degree satisfy with the conditions of stresses' measurements in front of mining workings' faces. The principal idea of the method is in the usage of proper face advancing aiming the estimation of the field stresses in its neighborhood. Borehole and photoelastic sensors, fixed in the advanced boreholes, drilled from the active face react to the field change of stresses or deformation caused by working face advancing. While obtaining this information we may judge about the distribution of additional stresses in rock of face's neighborhood and concentration of stresses in front of face. The usage of cavity (because of face advancing) in the quality of disturbing influence in combination with the properties of ring photoelastic sensor to given an information about magnitude and direction of secondary principle stresses, permits us to obtain rather a simple and not labor consuming method of investigation of field additional stresses in the working's face neighborhood.

Physiotherapy beyond Our Borders: Investigating Ideal Competencies for Canadian Physiotherapists Working in Resource-Poor Countries

PubMed Central

Cassady, Christina; Meru, Rehana; Chan, Nga Man Carmen; Engelhardt, Julie; Fraser, Michelle

2014-01-01

ABSTRACT Purpose: To explore the perspectives of Canadian physiotherapists with global health experience on the ideal competencies for Canadian physiotherapists working in resource-poor countries. Method: A qualitative interpretive methodology was used, and the Essential Competency Profile for Physiotherapists in Canada, 2009 (ECP), was employed as a starting point for investigation and analysis. Semi-structured one-on-one interviews (60–90 minutes) were conducted with 17 Canadian physiotherapists who have worked in resource-poor countries. Descriptive and thematic analyses were conducted collaboratively. Results: The seven ECP roles—Expert, Communicator, Collaborator, Manager, Advocate, Scholarly Practitioner, and Professional—were all viewed as important for Canadian physiotherapists working in resource-poor countries. Two roles, Communicator and Manager, have additional competencies that participants felt were important. Three novel roles—Global Health Learner, Critical Thinker, and Respectful Guest—were created to describe other competencies related to global health deemed crucial by participants. Conclusions: This is the first study to examine competencies required by Canadian physiotherapists working in resource-poor countries. In addition to the ECP roles, supplementary competencies are recommended for engagement in resource-poor countries. These findings align with ideas in current global health and international development literature. Future research should examine the relevance of these findings to resource-poor settings within Canada. PMID:24719503

Automated Work Package: Conceptual Design and Data Architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al Rashdan, Ahmad; Oxstrand, Johanna; Agarwal, Vivek

The automated work package (AWP) is one of the U.S. Department of Energy’s (DOE) Light Water Reactor Sustainability Program efforts to enhance the safety and economics of the nuclear power industry. An AWP is an adaptive and interactive work package that intelligently drives the work process according to the plant condition, resources status, and users progress. The AWP aims to automate several manual tasks of the work process to enhance human performance and reduce human errors. Electronic work packages (eWPs), studied by the Electric Power Research Institute (EPRI), are work packages that rely to various extent on electronic data processingmore » and presentation. AWPs are the future of eWPs. They are envisioned to incorporate the advanced technologies of the future, and thus address the unresolved deficiencies associated with the eWPs in a nuclear power plant. In order to define the AWP, it is necessary to develop an ideal envisioned scenario of the future work process without any current technology restriction. The approach followed to develop this scenario is specific to every stage of the work process execution. The scenario development resulted in fifty advanced functionalities that can be part of the AWP. To rank the importance of these functionalities, a survey was conducted involving several U.S. nuclear utilities. The survey aimed at determining the current need of the nuclear industry with respect to the current work process, i.e. what the industry is satisfied with, and where the industry envisions potential for improvement. The survey evaluated the most promising functionalities resulting from the scenario development. The results demonstrated a significant desire to adopt the majority of these functionalities. The results of the survey are expected to drive the Idaho National Laboratory (INL) AWP research and development (R&D). In order to facilitate this mission, a prototype AWP is needed. Since the vast majority of earlier efforts focused on the frontend aspects of the AWP, the backend data architecture was researched and developed in this effort. The backend design involved data architecture aspects. It was realized through this effort that the key aspects of this design are hierarchy, data configuration and live information, data templates and instances, the flow of work package execution, the introduction of properties, and the means to interface the backend to the frontend. After the backend design was developed, a data structure was built to reflect the developed data architecture. The data structure was developed to accommodate the fifty functionalities identified by the envisioned scenario development. The data structure was evaluated by incorporating an example work order from the nuclear power industry. The implementation resulted in several optimization iterations of the data structure. In addition, the rearrangement of the work order information to fit the data structure highlighted several possibilities for improvement in the current work order design, and significantly reduced the size of the work order.« less

The Clinical and Occupational Correlates of Work Productivity Loss Among Employed Patients With Depression

PubMed Central

Lerner, Debra; Adler, David A.; Chang, Hong; Berndt, Ernst R.; Irish, Julie T.; Lapitsky, Leueen; Hood, Maggie Y.; Reed, John; Rogers, William H.

2014-01-01

Employers who are developing strategies to reduce health-related productivity loss may benefit from aiming their interventions at the employees who need them most. We determined whether depression’s negative productivity impact varied with the type of work employees performed. Subjects (246 with depression and 143 controls) answered the Work Limitations Questionnaire and additional work questions. Occupational requirements were measured objectively. In multiple regression analyses, productivity was most influenced by depression severity (P < 0.01 in 5/5 models). However, certain occupations also significantly increased employee vulnerability to productivity loss. Losses increased when employees had occupations requiring proficiency in decision-making and communication and/or frequent customer contact (P < 0.05 in 3/5 models). The Work Limitations Questionnaire can help employers to reduce productivity loss by identifying health and productivity improvement priorities. PMID:15194895

Employers' knowledge and attitudes regarding organizational policy toward workers caring for aging family members.

PubMed

Katz, Ruth; Lowenstein, Ariela; Prilutzky, Dana; Halperin, Dafna

2011-04-01

The study examined employers' knowledge of and attitudes toward working carers who care for aging family members. The study was based on the ecological model. One hundred employers were interviewed using structured questionnaires and 13 employers by additional in-depth interviews. Both research instruments included areas of disruption to the organization, existing policies, and feasibility as to developing appropriate policies to support working carers. Results show that caregiving caused a disruption in workers' functioning mainly by being absent, leaving work early, and coming to work late. Usually, there was "no policy," and half of the employers did not support introducing such a policy. Women managers in public organizations, who had less seniority and less previous experience with working-carers, tended to be more positive about supportive policies. Recommendations are included.

Innovative Ideas on How Work–Family Research Can Have More Impact

PubMed Central

Kossek, Ellen Ernst; Baltes, Boris B.; Matthews, Russell A.

2011-01-01

The commentaries on our focal article agreed with its main premise that work–family research should follow new strategies to improve its practical impact, and made suggestions clustering into three main themes. The first theme built on our suggestion to improve the research focus, terminology, and framing of work-family research. These essays offered additional ideas such as decoupling work-family from work-life research, and examining contextual factors more deeply. The second theme focused on how to better apply the findings from work family research. These commentaries provided social change approaches for making work-family issues more central to key stakeholders and to organizations. The third theme focused on broadening our scope to the societal level. These editorials advocated tactics supporting the development of basic rights of work–life balance within and across nations. PMID:22247738

Summary of Environmental Data Analysis and Work Performed by Lawrence Livermore National Laboratory (LLNL) in Support of the Navajo Nation Abandoned Mine Lands Project at Tse Tah, Arizona

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taffet, Michael J.; Esser, Bradley K.; Madrid, Victor M.

This report summarizes work performed by Lawrence Livermore National Laboratory (LLNL) under Navajo Nation Services Contract CO9729 in support of the Navajo Abandoned Mine Lands Reclamation Program (NAMLRP). Due to restrictions on access to uranium mine waste sites at Tse Tah, Arizona that developed during the term of the contract, not all of the work scope could be performed. LLNL was able to interpret environmental monitoring data provided by NAMLRP. Summaries of these data evaluation activities are provided in this report. Additionally, during the contract period, LLNL provided technical guidance, instructional meetings, and review of relevant work performed by NAMLRPmore » and its contractors that was not contained in the contract work scope.« less

Women of the Manhattan Project

NASA Astrophysics Data System (ADS)

Marshall, Jill

2009-10-01

In the book Their Day in the Sun, Ruth Howes and Caroline Herzenberg documented more than 1000 women who worked on the Manhattan Project, preserving their legacy for generations to come. At the 2009 Chicago meeting, the AAPT Committee on Women in Physics celebrated the accomplishments of these women and the men who worked beside them. Howes presented an overview of the contributions of women to the development of the first nuclear weapon, and the session was honored with talks from two Manhattan project veterans, Ellen Cleminshaw Weaver, who worked at Oak Ridge, and Dorothy Marcus Gans, who worked as a technician in the Metallurgical Laboratory in Chicago. I will present a summary of the session, analyzing the effect of working on the project on the career trajectories of the women involved, and point listeners toward additional documentation of this history.

The management of advanced practitioner preparation: a work-based challenge.

PubMed

Livesley, Joan; Waters, Karen; Tarbuck, Paul

2009-07-01

This paper explores the collaborative development of a Master's level advanced practice programme in the context of the radical reform and remodelling of the UK's National Health Service. Some of the educational, managerial and practice challenges are discussed. Changes to education and training in response to key strategic reviews undertaken by the Greater Manchester Strategic Health Authority (North West of England) established a need to develop nurses and allied health care practitioners to advanced practitioner level. This paper considers how employers, commissioners and educationalists worked together to produce a Master's level programme to prepare nurses and other health care practitioners for sustainable advanced practice roles. Developing innovative and effective curricula to meet the needs of post graduate students from varied backgrounds preparing to practice in different contexts with different client groups is challenging. However, the development of individual learning pathways and work-based learning ensures that the student's work and intended advanced practice role remains at the centre of their learning. Analysis of each student's knowledge and skill deficits alongside an analysis of the organization's readiness to support them as qualified advanced practitioners (APs) is instrumental in ensuring that organizations are ready to support practitioners in new roles. Work-based learning and collaboration between students, employers and higher education institutions can be used to enable managers and students to unravel the network of factors which affect advanced practice in health and social care. Additionally, collaborative working can help to create opportunities to develop strategies that will facilitate change. Implications for nursing management Sustainable change concerned with the introduction of advanced practitioner roles present a real challenge for managers at a strategic and operational level. Commissioning flexible, collaborative and service-led educational programmes can assist in ensuring that change is sustainable and produce practitioners who are fit for practice, purpose and award.

The development of real-time stability supports visual working memory performance: Young children's feature binding can be improved through perceptual structure.

PubMed

Simmering, Vanessa R; Wood, Chelsey M

2017-08-01

Working memory is a basic cognitive process that predicts higher-level skills. A central question in theories of working memory development is the generality of the mechanisms proposed to explain improvements in performance. Prior theories have been closely tied to particular tasks and/or age groups, limiting their generalizability. The cognitive dynamics theory of visual working memory development has been proposed to overcome this limitation. From this perspective, developmental improvements arise through the coordination of cognitive processes to meet demands of different behavioral tasks. This notion is described as real-time stability, and can be probed through experiments that assess how changing task demands impact children's performance. The current studies test this account by probing visual working memory for colors and shapes in a change detection task that compares detection of changes to new features versus swaps in color-shape binding. In Experiment 1, 3- to 4-year-old children showed impairments specific to binding swaps, as predicted by decreased real-time stability early in development; 5- to 6-year-old children showed a slight advantage on binding swaps, but 7- to 8-year-old children and adults showed no difference across trial types. Experiment 2 tested the proposed explanation of young children's binding impairment through added perceptual structure, which supported the stability and precision of feature localization in memory-a process key to detecting binding swaps. This additional structure improved young children's binding swap detection, but not new-feature detection or adults' performance. These results provide further evidence for the cognitive dynamics and real-time stability explanation of visual working memory development. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

European approaches to work-related stress: a critical review on risk evaluation.

PubMed

Zoni, Silvia; Lucchini, Roberto G

2012-03-01

In recent years, various international organizations have raised awareness regarding psychosocial risks and work-related stress. European stakeholders have also taken action on these issues by producing important documents, such as position papers and government regulations, which are reviewed in this article. In particular, 4 European models that have been developed for the assessment and management of work-related stress are considered here. Although important advances have been made in the understanding of work-related stress, there are still gaps in the translation of this knowledge into effective practice at the enterprise level. There are additional problems regarding the methodology in the evaluation of work-related stress. The European models described in this article are based on holistic, global and participatory approaches, where the active role of and involvement of workers are always emphasized. The limitations of these models are in the lack of clarity on preventive intervention and, for two of them, the lack of instrument standardization for risk evaluation. The comparison among the European models to approach work-related stress, although with limitations and socio-cultural differences, offers the possibility for the development of a social dialogue that is important in defining the correct and practical methodology for work stress evaluation and prevention.

Performance assessment of an irreversible nano Brayton cycle operating with Maxwell-Boltzmann gas

NASA Astrophysics Data System (ADS)

Açıkkalp, Emin; Caner, Necmettin

2015-05-01

In the last decades, nano-technology has been developed very fast. According to this, nano-cycle thermodynamics should improve with a similar rate. In this paper, a nano-scale irreversible Brayton cycle working with helium is evaluated for different thermodynamic criteria. These are maximum work output, ecological function, ecological coefficient of performance, exergetic performance criteria and energy efficiency. Thermodynamic analysis was performed for these criteria and results were submitted numerically. In addition, these criteria are compared with each other and the most convenient methods for the optimum conditions are suggested.

Large angle magnetic suspension test fixture

NASA Technical Reports Server (NTRS)

Britcher, Colin P. (Principal Investigator); Huang, Jen-Kuang (Principal Investigator)

1996-01-01

Good progress is being made in several major areas. These include eddy current modelling and analysis, design optimization methods, wind tunnel Magnetic Suspension and Balance Systems (MSBS), payload pointing and vibration isolation systems, and system identification. In addition, another successful International Symposium has been completed, with the Proceedings being printed at the time of writing. These activities continue current work under this Grant and extend previous work on magnetic suspension systems and devices in the Guidance and Control Branch and will permit the demonstration of several new developments in the field of magnetic suspension technology.

Burrowing activities of the larval lamprey

USGS Publications Warehouse

Sawyer, Philip J.

1959-01-01

Since the appearance in 1950 of Applegate's work on the sea lamprey in Michigan (U. S. Fish and Wildl. Serv., Spec. Sci. Rept.; Fish, No. 55) and the subsequent development of means to control lampreys in the Great Lakes, biologists have accumulated much additional information on adult lampreys. Larval lampreys, however, are difficult animals to observe in the field, and many facets of their behavior are still unknown. While working with the U. S. Fish and Wildlife Service, I kept ammocetes in captivity, and was able to observe their burrowing activities.

Extravehicular Crewman Work System (ECWS) study program. Volume 3: Satellite service

NASA Technical Reports Server (NTRS)

Wilde, R. C.

1980-01-01

The satellite service portion of the Extravehicular Crewman Work System Study defines requirements and service equipment concepts for performing satellite service from the space shuttle orbiter. Both normal and contingency orbital satellite service is required. Service oriented satellite design practices are required to provide on orbit satellite service capability for the wide variety of satellites at the subsystem level. Development of additional satellite service equipment is required. The existing space transportation system provides a limited capability for performing satellite service tasks in the shuttle payload bay area.

Yet More Lessons From Complexity. Unity the key for Peace.

NASA Astrophysics Data System (ADS)

Puente, C. E.

2004-12-01

The last few decades have witnessed the development of a host of ideas aimed at understanding and predicting nature's ever present complexity. It is shown that such a work provides, through its detailed study of order and disorder, a suitable framework for visualizing the dynamics and consequences of mankind's ever present divisive traits. Specifically, this work explains how recent universal results pertaining to power-laws, self-organized criticality and space-filling transformations provide additional and pertinent reminders that point us to unity as an essential element for us to achieve peace.

Cockpit design and evaluation using interactive graphics

NASA Technical Reports Server (NTRS)

Evans, S. M.

1975-01-01

A general overview of the characteristics of an interactive graphics system which was developed to assist cockpit engineers design and evaluate work stations was presented. The manikin used in this COMputerized BIomechanical MAN-model (COMBIMAN) was described, as are provisions for generating work stations and assessing interactions between man and environment. The applications of the present system are explained, and critiques of COMBIMAN are presented. The limitations of the existing programs and the requirements of the designers necessitate future revisions and additions to the biomechanical and erogonomic properties of COMBIMAN. Some of these enhancements are discussed.

Worksheets for computing recommended notebook computer and workstation adjustments.

PubMed

Nanthavanij, Suebsak; Udomratana, Chatkate; Hansawad, Saowalak; Thepkanjana, Jayaporn; Tantasuwan, Wanchalerm

2013-01-01

This paper discusses the design and development of worksheets for helping notebook computer (NBC) users to compute NBC and workstation adjustments so as to assume an appropriate seated posture. The worksheets (one for male users, the other for female ones) require the following information: body height, NBC screen size, work surface height, and seat height. The worksheets contain tables for estimating recommended NBC base angle, NBC screen angle, body-NBC distance, work surface height, and seat height. Additionally, they include flow charts to help NBC users to determine necessary adjustment accessories and their settings.

[Certificate "Tropical and Travel Dermatology (DDA)": quality-assured medical education for dermatologists with a "migration perspective"].

PubMed

Elsner, P; Nenoff, P; Schliemann, S; Tittelbach, J; Reinel, D

2014-10-01

Under the conditions of economic pressure in the medical system and the DRG system for hospitals in Germany, so-called "uneconomic" services and fields of specialized dermatologic competence such as pediatric dermatology, trichology, occupational dermatology and tropical dermatology are increasingly being neglected. While hospitals tend to train fewer residents in these subspecialties, there is a demand for additional high-quality training opportunities that are certified by the German Dermatologic Academy (DDA). Tropical and travel-related skin diseases are more frequently observed in Germany which can be explained by the increased world-wide travel activities, but also by the international migration from developing countries into Europe. Furthermore, dermatologists trained in Germany are working more and more also internationally. Thus, they require knowledge and experience in tropical and travel-related dermatology. The certificate "Tropical and Travel Dermatology (DDA)" was developed and published in 2013 in a cooperation between the International Society for Dermatology in the Tropics in cooperation with the German Academy of Dermatology (DDA). It consists of 3 full day teaching modules (basic, additional and special seminar). The first seminar cycle in 2013/2014 showed a high demand from dermatologists in hospitals and private practices. While the basic and the special seminars were held in Germany, the additional seminar took place in cooperation with the Regional Dermatology Training Center (RDTC) in Moshi, Tanzania. Many attending dermatologists fulfilling the requirements for the new certificate have practiced in developing countries or plan to do so. In order to gain practical experience on the basis of the knowledge acquired in the qualifying seminars, the International Society for Dermatology in the Tropics supports dermatologists to find internships and work placements in dermatological units in developing countries.

Quiet Clean Short-Haul Experimental Engine (QCSEE): Acoustic treatment development and design

NASA Technical Reports Server (NTRS)

Clemons, A.

1979-01-01

Acoustic treatment designs for the quiet clean short-haul experimental engines are defined. The procedures used in the development of each noise-source suppressor device are presented and discussed in detail. A complete description of all treatment concepts considered and the test facilities utilized in obtaining background data used in treatment development are also described. Additional supporting investigations that are complementary to the treatment development work are presented. The expected suppression results for each treatment configuration are given in terms of delta SPL versus frequency and in terms of delta PNdB.

Computational Aeroelastic Analyses of a Low-Boom Supersonic Configuration

NASA Technical Reports Server (NTRS)

Silva, Walter A.; Sanetrik, Mark D.; Chwalowski, Pawel; Connolly, Joseph

2015-01-01

An overview of NASA's Commercial Supersonic Technology (CST) Aeroservoelasticity (ASE) element is provided with a focus on recent computational aeroelastic analyses of a low-boom supersonic configuration developed by Lockheed-Martin and referred to as the N+2 configuration. The overview includes details of the computational models developed to date including a linear finite element model (FEM), linear unsteady aerodynamic models, unstructured CFD grids, and CFD-based aeroelastic analyses. In addition, a summary of the work involving the development of aeroelastic reduced-order models (ROMs) and the development of an aero-propulso-servo-elastic (APSE) model is provided.

[Why child neuropsychiatry?].

PubMed

Göllnitz, G

1978-05-01

The author gives a brief survey of the development of Child-Neuropsychiatry in the G.D.R. and subsequently gives reasons for the decision in favor of the unity of neurology and psychiatry as applied to children and juveniles, which is in contrast to developments in other countries. In addition to hygienic, economic, organizational, and medical considerations, this decision was also determined by the fact that a Child-Neuropsychiatrist must, in his practical work as a subspecialist, be able to head a multiprofessional team and, thus, help assure optimum development of a child's personality.

Descriptive Summaries of the Research Development Test & Evaluation Army Appropriation FY 1982. Supporting Data FY 1982, Budget Estimate Submitted to Congress January 1981 (Amended 30 April 1981). Volume II.

DTIC Science & Technology

1981-01-01

the Position Location Reporting System/Joint Tactical Information Distributlo:; System Hybrid (ADDS) was approved by the Combat and Materiel Developers...Programs program. The establishment of a hybrid testbed will be Initiated in FY 1981 integrating the engint-ciag development models of Position...ad anticipated. 0.110 - This project was Increased by $1999 thousand in FT 1980 to support additional AD work on the hybrid collective protec- tion

Electrochemical concentration measurements for multianalyte mixtures in simulated electrorefiner salt

NASA Astrophysics Data System (ADS)

Rappleye, Devin Spencer

The development of electroanalytical techniques in multianalyte molten salt mixtures, such as those found in used nuclear fuel electrorefiners, would enable in situ, real-time concentration measurements. Such measurements are beneficial for process monitoring, optimization and control, as well as for international safeguards and nuclear material accountancy. Electroanalytical work in molten salts has been limited to single-analyte mixtures with a few exceptions. This work builds upon the knowledge of molten salt electrochemistry by performing electrochemical measurements on molten eutectic LiCl-KCl salt mixture containing two analytes, developing techniques for quantitatively analyzing the measured signals even with an additional signal from another analyte, correlating signals to concentration and identifying improvements in experimental and analytical methodologies. (Abstract shortened by ProQuest.).

Poverty reduction by improving health and social services in Vietnam.

PubMed

Gien, Lan; Taylor, Sharon; Barter, Ken; Tiep, Nguyen; Mai, Bui X; Lan, Nguyen T

2007-12-01

This article describes the development and implementation of a five-year plan for the reduction of poverty and the enhancement of human development through improving public health and social services in rural Vietnam. This plan was achieved by training the trainers and building capacity for the social workers. The project was a collaborative effort between the Schools of Nursing and Social Work at Memorial University, Newfoundland and Labrador, Canada and the University of Labor and Social Affairs, Hanoi, Vietnam. The collaboration was also committed to improving the quality of social work education and training in Vietnam. All the project's objectives were achieved beyond original expectations. The actual outcomes are sustainable and in addition gender equality has been a cross-cutting theme.

Engaging and Empowering the National Park Service to apply Earth Observations to Management Decisions

NASA Astrophysics Data System (ADS)

Clayton, A.; Ross, K. W.; Crepps, G.; Childs-Gleason, L. M.; Ruiz, M. L.; Rogers, L.; Allsbrook, K. N.

2017-12-01

Since 2015, the NASA DEVELOP National Program has partnered with the National Park Service (NPS) engaging more than 120 program participants, working on over 22 projects across approximately 27 unique park units. These projects examined a variety of cultural and environmental concerns facing the NPS including landscape disturbance, invasive species mapping, archaeological site preservation, and water resources monitoring. DEVELOP, part of NASA's Applied Sciences' Capacity Building program, conducts 10-week feasibility projects which demonstrate the utility of NASA's Earth observations as an additional tool for decision-making processes. This presentation will highlight several of these projects and discuss the progress of capacity building working with individual, regional, and institutional elements within the National Park Service.

Optimization of the lithium/thionyl chloride battery

NASA Technical Reports Server (NTRS)

White, Ralph E.

1987-01-01

The progress which has been made in modeling the lithium/thionyl chloride cell over the past year and proposed research for the coming year are discussed. A one-dimensional mathematical model for a lithium/thionyl chloride cell has been developed and used to investigate methods of improving cell performance. During the course of the work a problem was detected with the banded solver being used. It was replaced with one more reliable. Future work may take one of two directions. The one-dimensional model could be augmented to include additional features and to investigate in more detail the cell temperature behavior, or a simplified two-dimensional model for the spirally wound design of this battery could be developed to investigate the heat flow within the cell.

75 FR 78939 - Senior Community Service Employment Program; Notice of Proposed Rulemaking, Additional Indicator...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... Community Service Employment Program; Notice of Proposed Rulemaking, Additional Indicator on Volunteer Work... Senior Community Service Employment Program (SCSEP), Additional Indicator on Volunteer Work that was... number of exiting participants who enter volunteer work. The relevant Office of Management and Budget...

Integrated ergonomics approach toward designing night and shift work in developing countries based on experiences in Bali, Indonesia.

PubMed

Manuaba, A

2001-12-01

Recently, the effort in carrying out an integrated ergonomics approach known as "SHIP" (systemic, holistic, interdisciplinary and participatory) approach has been intensively undertaken in Bali with the aim of sustaining improvements being done. The People's Consultative Assembly of the Republic of Indonesia issued for the 1999-2004 period a "SHIP" Act on the Macro Guidelines of Tourism Development in which ergonomics and other factors must be considered comprehensively to attain sustainable development in tourism. Therefore the night and shift work that is recently increasingly applied in the tourism industry must also be designed and organized through this approach. In fact, however, economic factors have still been the predominant reason for workers to accept any type of night and shift work decided by the management, without taking into account possible impacts and consequences. For example, rapid forward rotation schemes seem more adapted to the hotel industry instead of traditional 6-6-6 rotation. Further, inter-city bus drivers are approved to work a 24-hour shift followed by one day off. These drivers often work an additional risky night shift after two consecutive night shifts so as to meet needed expenses for the family. Cultural or religious activities still presented constraints for workers as they carried out subsequently the night work. Therefore, proactive steps should be taken in a timely manner through the integrated SHIP approach in designing night and shift work so as to achieve work schedules compatible with both social life of shiftworkers and business concerns.

Examining Regionalization Efforts to Develop Lessons Learned and Consideration for Department of Defense Medical Facilities

DTIC Science & Technology

2017-03-23

Consideration for Department of Defense Medical Facilities Erik B. Schuh Follow this and additional works at: https://scholar.afit.edu/etd Part of the...Citation Schuh, Erik B., "Examining Regionalization Efforts to Develop Lessons Learned and Consideration for Department of Defense Medical Facilities...Consideration for Department of Defense Medical Facilities THESIS Erik B. Schuh, 2Lt, USAF AFIT-ENS-MS-17-M-156 DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY AIR

A Case Study in Design Thinking Applied Through Aviation Mission Support Tactical Advancements for the Next Generation (TANG)

DTIC Science & Technology

2017-12-01

This is an examination of the research, execution, and follow- on developments supporting the Design Thinking event explored through Case Study ...research, execution, and follow- on developments supporting the Design Thinking event explored through case study methods. Additionally, the lenses of...total there have been two Naval Postgraduate School (NPS) case study theses on U.S. Navy innovation events as well as other works examining the

Enhancement of Antiviral Agents Through the Use of Controlled-Release Technology.

DTIC Science & Technology

DL-lactide-co-glycolide) to be used as the polymeric excipients in the microencapsulation work. In addition, we have actively pursued development and testing of poly(I.C) and Je vaccine microcapsule formulations....of this research program are a) To develop a programmed-release delivery system ( microcapsule system) designed to enhance the immunogenic potential of...release microcapsule delivery systems that will enhance the effects of the following immune modulators and antiviral agents: muramyl tripeptide (MTP

Addition of Olfactory Stimuli to Virtual Reality Simulations for Medical Training Applications

DTIC Science & Technology

1996-11-01

surveyed and a working set of odorants were indentified or developed in sufficient quantities to support further testing. Extensive studies were performed...Olfactory Displays for HMD Systems 8 Ambulatory Olfactory HMD Display 11 Odor Display--Booth Environment 19 Odor Display in CAVE 20 Odor Survey and Odor...HMDs, it may be welcome in some scenarios such as those that might be used for training medics. Odorant Survey and Odor Development A second area of

Geologic report and recommendations for the cobalt mission to Morocco sponsored by The Trade and Development Program of the International Development Cooperation Agency

USGS Publications Warehouse

Foose, M.P.; Rossman, D.L.

1982-01-01

A mission sponsored by the Trade and Development Program (TDP) of the International Development Cooperation Agency (IDCA) went to Morocco to evaluate the possibility of finding additional sources of cobalt in that country, as well as other types of mineralization. Information obtained during this trip shows Morocco to be a country for which much geologic information is available and in which there are many favorable target areas for future exploration. Work in the Bou Azzer district (Morocco's principal cobalt district) shows that much excellent geologic work has been done in searching for additional deposits. However, a number of useful approaches to locate cobalt have not been tried, and their use might be successful. The potential for undiscovered deposits in the Bou Azzer region seems very high. The cobalt mineralization in the Siroua uplift is different from that in the Bou Azzer district. However, geologic similarities between the two areas suggest that a genetic link may exist between the two types of mineralization. This further indicates that cobalt deposits of the Bou Azzer types might be present in the Siroua region. Examination of the Bleida copper mine shows it to be a well-exposed volcanic hosted stratabound copper deposit. Large unexplored areas containing similar rocks occur near this deposit and may contain as yet undiscovered copper mineralization.

Large-area sheet task advanced dendritic web growth development

NASA Technical Reports Server (NTRS)

Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hopkins, R. H.; Meier, D.; Schruben, J.

1982-01-01

The computer code for calculating web temperature distribution was expanded to provide a graphics output in addition to numerical and punch card output. The new code was used to examine various modifications of the J419 configuration and, on the basis of the results, a new growth geometry was designed. Additionally, several mathematically defined temperature profiles were evaluated for the effects of the free boundary (growth front) on the thermal stress generation. Experimental growth runs were made with modified J419 configurations to complement the modeling work. A modified J435 configuration was evaluated.

Understanding the full breadth of cancer-related patient costs in Ontario: a qualitative exploration.

PubMed

Longo, Christopher J; Fitch, Margaret; Grignon, Michel; McAndrew, Alison

2016-11-01

This research informs existing work by examining the full scope of out-of-pocket costs and lost income, patients' private insurance behaviors, and their overall management of finances during their cancer treatment. The intent was to gain a deeper understanding of patient circumstances and the related costs. Participant qualitative interviews were conducted in person during outpatient clinic visits or by telephone and were recorded between June 2011 and July 2012. Interviews were transcribed verbatim and subjected to a descriptive qualitative analysis. The research team collaborated early in the process (after three subjects were enrolled) to develop a preliminary coding framework. The coding framework was modified to incorporate additional emerging content until saturation of data was evident. Transcripts were coded using the qualitative software NVivo version 9.0. Fifteen patients agreed to participate in the study and 14 completed the interview (seven breast, three colorectal, two lung, and two prostate). Consistent with existing published work, participants expressed concerns regarding expenses related to medications, complementary/alternative medicines, devices, parking and travel. These concerns were exacerbated if patients did not have insurance or lost insurance coverage due to loss of work. Although many acknowledged in hindsight that additional insurance would have helped, they also recognized that at the time of their diagnoses, it was not a viable option. Previously unidentified categorical costs identified in this study included modifications to housing arrangements or renovations, special clothing, fitness costs and the impact of an altered diet. We confirmed the results of earlier Canadian quantitative work. Additionally, cost categories not previously explored were identified, which will facilitate the development of an improved and more comprehensive quantitative questionnaire for future research. Many patients indicated that supplemental health insurance would have made their cancer journey less stressful, highlighting existing gaps in the government funded health care system.

Strategies for continuing professional development among younger, middle-aged, and older nurses: a biographical approach.

PubMed

Pool, Inge A; Poell, Rob F; Berings, Marjolein G M C; ten Cate, Olle

2015-05-01

A nursing career can last for more than 40 years, during which continuing professional development is essential. Nurses participate in a variety of learning activities that correspond with their developmental motives. Lifespan psychology shows that work-related motives change with age, leading to the expectation that motives for continuing professional development also change. Nevertheless, little is known about nurses' continuing professional development strategies in different age groups. To explore continuing professional development strategies among younger, middle-aged, and older nurses. A qualitative study using semi-structured interviews, from a biographical perspective. Data were analysed using a vertical process aimed at creating individual learning biographies, and a horizontal process directed at discovering differences and similarities between age groups. Twenty-one nurses in three age groups from general and academic hospitals in the Netherlands. In all age groups, daily work was an important trigger for professional development on the ward. Performing extra or new tasks appeared to be an additional trigger for undertaking learning activities external to the ward. Learning experiences in nurses' private lives also contributed to their continuing professional development. Besides these similarities, the data revealed differences in career stages and private lives, which appeared to be related to differences in continuing professional development strategy; 'gaining experience and building a career' held particularly true among younger nurses, 'work-life balance' and 'keeping work interesting and varied' to middle-aged nurses, and 'consistency at work' to older nurses. Professional development strategies can aim at performing daily patient care, extra tasks and other roles. Age differences in these strategies appear to relate to tenure, perspectives on the future, and situations at home. These insights could help hospitals to orientate continuing professional development approaches toward the needs of all age groups. This should be particularly relevant in the face of present demographic changes in the nursing workforce. Copyright © 2015 Elsevier Ltd. All rights reserved.

Electron beam additive manufacturing with wire - Analysis of the process

NASA Astrophysics Data System (ADS)

Weglowski, Marek St.; Błacha, Sylwester; Pilarczyk, Jan; Dutkiewicz, Jan; Rogal, Łukasz

2018-05-01

The electron beam additive manufacturing process with wire is a part of global trend to find fast and efficient methods for producing complex shapes elements from costly metal alloys such as stainless steels, nickel alloys, titanium alloys etc. whose production by other conventional technologies is unprofitable or technically impossible. Demand for additive manufacturing is linked to the development of new technologies in the automotive, aerospace and machinery industries. The aim of the presented work was to carried out research on electron beam additive manufacturing with a wire as a deposited (filler) material. The scope of the work was to investigate the influence of selected technological parameters such as: wire feed rate, beam current, travelling speed, acceleration voltage on stability of the deposition process and geometric dimensions of the padding welds. The research revealed that, at low beam currents, the deposition process is unstable. The padding weld reinforcement is non-uniform. Irregularity of the width, height and straightness of the padding welds can be observed. At too high acceleration voltage and beam current, burn-through of plate and excess penetration weld can be revealed. The achieved results and gained knowledge allowed to produce, based on EBAM with wire process, whole structure from stainless steel.

Synthesis of new high performance lubricants and solid lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lagow, Richard J.

1993-04-08

In our second year of funding we began the testing phase of a number of new classes of lubricants. Three different testing collaborations have already begun and a fourth one is In the works with Dr. Stephen Hsu of the National Institute of Standards and Technology. Dr. Hsu also plans to test some of the same materials for us that Shell Development is studying. With Dr. Bill Jones of NASA, we are studying the effects of branching an high temperature lubricant properties in perfluoropolyethers, Initially Bill Jones is comparing the lubrication and physical properties of perfluorotetraglyme and the following twomore » spherical perfluoropolyethers, Note that one contains a fluorocarbon chain and the other one contains a fluorocarbon ether chain. The synthesis of these was reported in the last progress report. With Professor Patricia Thiel of Iowa State University, we are working on studies of perfluoromethylene oxide ethers and have prepared a series of four of these polyethers to study in collaboration with her research group. These perfluoromethylene oxide ethers have the best low temperature properties of any known lubricants. Thiel's group is studying their interactions with metals under extreme conditions. Thirdly, we have also begun an Interaction with W. August Birke of Shell Development Company in Houston for whom we have already prepared samples of the chlorine-substituted fluorocarbon polyether lubricants whose structures appear on page 54 of our research proposal. Each of these four structures is thought to have potential as lubricant additives to motor oils. We also have underway syntheses of other fluorine-containing branched ether lubricants. These new materials which are also promising as antifriction additives for motor oils appear ahead of the perfluoro additives as Appendix I to the progress report. Additionally for Birke and Shell Development we have at their request prepared the novel compound perfluoro salicylic acid. This synthesis was suggested by the Shell staff who thought that esters of perfluoro salicylic acid might be an excellent antifriction additive for motor oil fuels. One of the best additives currently used in motor oils is the hydrocarbon ester of salicylic acid.« less

Support of US CLIVAR Project Office 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cummings, Donna

Director of JOSS, supervised the U.S. CLIVAR Project Office Director and helped direct the officer to enhance the goals and objectives of the U.S. CLIVAR Project and budget. Financial Manager of JOSS, worked to complete proposals and monitor compliance with award requirements and funding limitations and ensure the U.S. CLIVAR Project Office complied with UCAR policies and procedures. Project Coordinator administered the funding for the U.S. CLIVAR Project Office and was responsible for coordinating special projects that required additional support from JOSS technical staff. These projects included activities such as website updates, technology upgrades, production of printed reports, and developmentmore » of graphic elements like logos. Web Developer worked both on web development and graphic work and the work consisted of the following: Maintaining the site ? installing updates to Drupal CMS (Content Management System). Creating new templates for webpages and styling them with CSS and JavaScript/jQuery code. Fixing the styling on webpages that the content contributor/manager (Jenn Mays) created and has had trouble with. Creating new web forms for abstract uploading, subscriptions, and meeting registrations. Created 4 webpages for the ?ASP: Key Uncertainties in the Global Carbon-Cycle? meeting. Developed a document review form, instruction webpages, login redirect, dynamic table with form submissions for the US CLIVAR SSC Science Plan Document Review. This was open to the public from June 12, 2013 until July 10, 2013. During this time the user accounts had to be checked (daily) that were created by the public, to delete any spam ones. Graphics work: preparing images for general use on webpages, webpage banners, and for meeting name badges, creating a US CLIVAR letterhead, redesigning the US AMOC logo. System Administrator spent time working on the migration of the US CLIVAR site from the USGCRP office to UCAR here Boulder. This was done to increase the general speed of the site & to allow the web developer to work in it more efficiently. Main tasks were to Archive the old Site, create new development site for web developer, and move web address to new website when web developer was finished with development. There are no patients or equipment related to this proposals« less

Predictive Modeling of Fast-Curing Thermosets in Nozzle-Based Extrusion

NASA Technical Reports Server (NTRS)

Xie, Jingjin; Randolph, Robert; Simmons, Gary; Hull, Patrick V.; Mazzeo, Aaron D.

2017-01-01

This work presents an approach to modeling the dynamic spreading and curing behavior of thermosets in nozzle-based extrusions. Thermosets cover a wide range of materials, some of which permit low-temperature processing with subsequent high-temperature and high-strength working properties. Extruding thermosets may overcome the limited working temperatures and strengths of conventional thermoplastic materials used in additive manufacturing. This project aims to produce technology for the fabrication of thermoset-based structures leveraging advances made in nozzle-based extrusion, such as fused deposition modeling (FDM), material jetting, and direct writing. Understanding the synergistic interactions between spreading and fast curing of extruded thermosetting materials will provide essential insights for applications that require accurate dimensional controls, such as additive manufacturing [1], [2] and centrifugal coating/forming [3]. Two types of thermally curing thermosets -- one being a soft silicone (Ecoflex 0050) and the other being a toughened epoxy (G/Flex) -- served as the test materials in this work to obtain models for cure kinetics and viscosity. The developed models align with extensive measurements made with differential scanning calorimetry (DSC) and rheology. DSC monitors the change in the heat of reaction, which reflects the rate and degree of cure at different crosslinking stages. Rheology measures the change in complex viscosity, shear moduli, yield stress, and other properties dictated by chemical composition. By combining DSC and rheological measurements, it is possible to establish a set of models profiling the cure kinetics and chemorheology without prior knowledge of chemical composition, which is usually necessary for sophisticated mechanistic modeling. In this work, we conducted both isothermal and dynamic measurements with both DSC and rheology. With the developed models, numerical simulations yielded predictions of diameter and height of droplets, along with width and height of extruded lines cured at varied temperatures. Experimental results carried out on a goniometric platform and a nozzle-based 3D printer showed agreement with the numerical simulations. Finally, this presentation will show how the models are adaptable to the planning of tool paths and designs in additive manufacturing.

Cell source determines the immunological impact of biomimetic nanoparticles.

PubMed

Evangelopoulos, Michael; Parodi, Alessandro; Martinez, Jonathan O; Yazdi, Iman K; Cevenini, Armando; van de Ven, Anne L; Quattrocchi, Nicoletta; Boada, Christian; Taghipour, Nima; Corbo, Claudia; Brown, Brandon S; Scaria, Shilpa; Liu, Xuewu; Ferrari, Mauro; Tasciotti, Ennio

2016-03-01

Recently, engineering the surface of nanotherapeutics with biologics to provide them with superior biocompatibility and targeting towards pathological tissues has gained significant popularity. Although the functionalization of drug delivery vectors with cellular materials has been shown to provide synthetic particles with unique biological properties, these approaches may have undesirable immunological repercussions upon systemic administration. Herein, we comparatively analyzed unmodified multistage nanovectors and particles functionalized with murine and human leukocyte cellular membrane, dubbed Leukolike Vectors (LLV), and the immunological effects that may arise in vitro and in vivo. Previously, LLV demonstrated an avoidance of opsonization and phagocytosis, in addition to superior targeting of inflammation and prolonged circulation. In this work, we performed a comprehensive evaluation of the importance of the source of cellular membrane in increasing their systemic tolerance and minimizing an inflammatory response. Time-lapse microscopy revealed LLV developed using a cellular coating derived from a murine (i.e., syngeneic) source resulted in an active avoidance of uptake by macrophage cells. Additionally, LLV composed of a murine membrane were found to have decreased uptake in the liver with no significant effect on hepatic function. As biomimicry continues to develop, this work demonstrates the necessity to consider the source of biological material in the development of future drug delivery carriers. Copyright © 2015. Published by Elsevier Ltd.

Decent Work: A Psychological Perspective

PubMed Central

Blustein, David L.; Olle, Chad; Connors-Kellgren, Alice; Diamonti, A. J.

2016-01-01

This contribution, which serves as the lead article for the Research Topic entitled “From Meaning of Working to Meaningful Lives: The Challenges of Expanding Decent Work,” explores current challenges in the development and operationalization of decent work. Based on an initiative from the International Labor Organization [ILO] (1999) decent work represents an aspirational statement about the quality of work that should be available to all people who seek to work around the globe. Within recent years, several critiques have been raised about decent work from various disciplines, highlighting concerns about a retreat from the social justice ethos that had initially defined the concept. In addition, other scholars have observed that decent work has not included a focus on the role of meaning and purpose at work. To address these concerns, we propose that a psychological perspective can help to revitalize the decent work agenda by infusing a more specific focus on individual experiences and by reconnecting decent work to its social justice origins. As an illustration of the advantages of a psychological perspective, we explore the rise of precarious work and also connect the decent work agenda to the Psychology-of-Working Framework and Theory (Blustein, 2006; Duffy et al., 2016). PMID:27047430

Texas A&M University in the JET Collaboration - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fries, Rainer; Ko, Che-Ming

This final report summarizes the work done by PIs at Texas A&M University within the JET Topical Collaboration. The main focus of the group at Texas A&M has been the development and implementation of a hadronization model suitable to calculate hadronization of jet showers in heavy ion collisions event by event. The group successfully developed a hybrid model of parton recombination and remnant string fragmentation including recombination with thermal partons. A code realizing this model was developed and shared with other JET members. In addition, the group at Texas A&M worked on both open and hidden heavy flavor probes. Inmore » particular, they developed a description of heavy flavor hadronization based on recombination, and consistent with in-medium scattering rates of heavy quarks, and suggested the D s meson as a precise probe of the hadronization mechanism. Another noteworthy focus of their work was electromagnetic probes, in particular, dileptons and photons from interactions of jets with the medium. In the soft sector the group has made several contributions to modern topics, e.g. the splitting of elliptic flow between isospin partners and the role of the initial strong gluon fields.« less

Continued development of hybrid directional boring technology and New horizontal logging development for characterization, monitoring and instrument emplacement at environmental sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wemple, R.P.; Meyer, R.D.; Jacobson, R.D.

This work in partnership with industry is a continuation of cost- effective innovative, directional boring development begun in FY90 and planed to extend into FY94. Several demonstrations of the strategy of building hybrid hardware from utilities installation, geothermal, and soil mechanics technologies have been performed at Sandia National Laboratories (SNL) and at Charles Machine works (CMW) test sites as well as at a commercial refinery site. Additional tests at the SNL Directional Boring Test Range (DBTR) and a lagoon site are planned in calendar 1991. A new companion project to develop and demonstrate a hybrid capability for horizontal logging withmore » penetrometers, specialty instruments and samplers has been taken from concept to early prototype hardware. The project goal of extending the tracking/locating capability of the shallow boring equipment to 80in. is being pursued with encouraging results at 40in. depths. Boring costs, not including tailored well completions dictated by individual site parameters, are estimated at $20 to $50 per foot. Applications continue to emerge for this work and interest continues to be expressed by DoD and EPA researchers and environmental site engineers. 12 figs.« less

Implementation of renal key performance indicators: promoting improved clinical practice.

PubMed

Toussaint, Nigel D; McMahon, Lawrence P; Dowling, Gregory; Soding, Jenny; Safe, Maria; Knight, Richard; Fair, Kathleen; Linehan, Leanne; Walker, Rowan G; Power, David A

2015-03-01

In the Australian state of Victoria, the Renal Health Clinical Network (RHCN) of the Department of Health Victoria established a Renal Key Performance Indicator (KPI) Working Group in 2011. The group developed four KPIs related to chronic kidney disease and dialysis. A transplant working group of the RHCN developed two additional KPIs. The aim was to develop clinical indicators to measure performance of renal services to drive service improvement. A data collection and benchmarking programme was established, with data provided monthly to the Department using a purpose-designed website portal. The KPI Working Group is responsible for analysing data each quarter and ensuring indicators remain accurate and relevant. Each indicator has clear definitions and targets, and assess (i) patient education, (ii) timely creation of vascular access for haemodialysis, (iii) proportion of patients dialysing at home, (iv) incidence of dialysis-related peritonitis, (v) incidence of pre-emptive renal transplantation, and (vi) timely listing of patients for deceased donor transplantation. Most KPIs have demonstrated improved performance over time with limited gains notably in two: the proportion of patients dialysing at home (KPI 3) and timely listing patients for transplantation (KPI 6). KPI implementation has been established in Victoria for 2 years, providing performance data without additional funding. The six Victorian KPIs are measurable, relevant and modifiable, and implementation relies on enthusiasm and goodwill of physicians and nurses involved in collecting data. The KPIs require further evaluation, but adoption of a similar programme by other jurisdictions could lead to improved national outcomes. © 2014 Asian Pacific Society of Nephrology.

Supported Decision-Making: Implications from Positive Psychology for Assessment and Intervention in Rehabilitation and Employment.

PubMed

Uyanik, Hatice; Shogren, Karrie A; Blanck, Peter

2017-12-01

Purpose This article reviews existing literature on positive psychology, supported decision-making (SDM), employment, and disability. It examines interventions and assessments that have been empirically evaluated for the enhancement of decision-making and overall well-being of people with disabilities. Additionally, conceptual themes present in the literature were explored. Methods A systematic review was conducted across two databases (ERIC and PsychINFO) using various combination of keywords of 'disabilit*', work rehabilitation and employment terms, positive psychology terms, and SDM components. Seven database searches were conducted with diverse combinations of keywords, which identified 1425 results in total to be screened for relevance using their titles and abstracts. Database search was supplemented with hand searches of oft-cited journals, ancestral search, and supplemental search from grey literature. Results Only four studies were identified in the literature targeting SDM and positive psychology related constructs in the employment and job development context. Results across the studies indicated small to moderate impacts of the assessment and interventions on decision-making and engagement outcomes. Conceptually there are thematic areas of potential overlap, although they are limited in the explicit integration of theory in supported decision-making, positive psychology, disability, and employment. Conclusion Results suggest a need for additional scholarship in this area that focuses on theory development and integration as well as empirical work. Such work should examine the potential utility of considering positive psychological interventions when planning for SDM in the context of career development activities to enhance positive outcomes related to decision-making, self-determination, and other positive psychological constructs.

A gene-brain-cognition pathway for the effect of an Alzheimer׳s risk gene on working memory in young adults.

PubMed

Stevens, Benson W; DiBattista, Amanda M; William Rebeck, G; Green, Adam E

2014-08-01

Identifying pathways by which genetic Alzheimer׳s disease (AD) risk factors exert neurocognitive effects in young adults are essential for the effort to develop early interventions to forestall or prevent AD onset. Here, in a brain-imaging cohort of 59 young adults, we investigated effects of a variant within the clusterin (CLU) gene on working memory function and gray matter volume in cortical areas that support working memory. In addition, we investigated the extent to which effects of CLU genotype on working memory were independent of variation in the strongest AD risk factor gene apolipoprotein E (APOE). CLU is among the strongest genetic AD risk factors and, though it appears to share AD pathogenesis-related features with, APOE, it has been far less well studied. CLU genotype was associated with working memory performance in our study cohort. Notably, we found that variation in gray matter volume in a parietal region, previously implicated in maintenance of information for working memory, mediated the effect of CLU on working memory performance. APOE genotype did not affect working memory within our sample, and did not interact with CLU genotype. To our knowledge, this work represents the first evidence of a behavioral effect of CLU genotype in young people. In addition, this work identifies the first gene-brain-cognition mediation effect pathway for the transmission of the effect of an AD risk factor. Relative to conventional pairwise associations in cognitive neurogenetic research, gene-brain-cognition mediation modeling provides a more integrated understanding of how genetic effects transmit from gene to brain to cognitive function. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Nippon Foundation / GEBCO Indian Ocean Bathymetric Compilation Project

NASA Astrophysics Data System (ADS)

Wigley, R. A.; Hassan, N.; Chowdhury, M. Z.; Ranaweera, R.; Sy, X. L.; Runghen, H.; Arndt, J. E.

2014-12-01

The Indian Ocean Bathymetric Compilation (IOBC) project, undertaken by Nippon Foundation / GEBCO Scholars, is focused on building a regional bathymetric data compilation, of all publically-available bathymetric data within the Indian Ocean region from 30°N to 60° S and 10° to 147° E. One of the objectives of this project is the creation of a network of Nippon Foundation / GEBCO Scholars working together, derived from the thirty Scholars from fourteen nations bordering on the Indian Ocean who have graduated from this Postgraduate Certificate in Ocean Bathymetry (PCOB) training program training program at the University of New Hampshire. The IOBC project has provided students a working example during their course work and has been used as basis for student projects during their visits to another Laboratory at the end of their academic year. This multi-national, multi-disciplinary project team will continue to build on the skills gained during the PCOB program through additional training. The IOBC is being built using the methodology developed for the International Bathymetric Chart of the Southern Ocean (IBCSO) compilation (Arndt et al., 2013). This skill was transferred, through training workshops, to further support the ongoing development within the scholar's network. This capacity-building project is envisioned to connect other personnel from within all of the participating nations and organizations, resulting in additional capacity-building in this field of multi-resolution bathymetric grid generation in their home communities. An updated regional bathymetric map and grids of the Indian Ocean will be an invaluable tool for all fields of marine scientific research and resource management. In addition, it has implications for increased public safety by offering the best and most up-to-date depth data for modeling regional-scale oceanographic processes such as tsunami-wave propagation behavior amongst others.

Age-related changes in decision making: comparing informed and noninformed situations.

PubMed

Van Duijvenvoorde, Anna C K; Jansen, Brenda R J; Bredman, Joren C; Huizenga, Hilde M

2012-01-01

Advantageous decision making progressively develops into early adulthood, most specifically in complex and motivationally salient decision situations in which direct feedback on gains and losses is provided (Figner & Weber, 2011). However, the factors that underlie this developmental improvement in decision making are still not well understood. The current study therefore investigates 2 potential factors, long-term memory and working memory, by assigning a large developmental sample (7-29 years of age) to a condition with either high or low demands on long-term and working memory. The first condition featured an age-adapted version of the Iowa Gambling Task (IGT; Bechara, Damasio, Damasio, & Anderson, 1994; i.e., a noninformed situation), whereas the second condition provided an external store where explicit information on gains, losses, and probabilities per choice option was presented (i.e., an informed situation). Consistent with previous developmental IGT studies, children up to age 12 did not learn to prefer advantageous options in the noninformed condition. In contrast, all age groups learned to prefer the advantageous options in the informed conditions, although a slight developmental increase in advantageous decision making remained. These results indicate that lowering dependence on long-term and working memory improves children's advantageous decision making. The results additionally suggest that other factors, like inhibitory control processes, may play an additional role in the development of advantageous decision making.

The impact of structural adjustment and the changing nature of women's work in the People's Republic of China.

PubMed

Roy, S

2000-01-01

This paper examines the impact of structural adjustment and the changing nature of women's work in the People's Republic of China (PRC). It is noted that more than two-thirds of the developing countries have adopted structural adjustment policy packages as an answer to the economic crisis they are facing. Such an adjustment is a conscious change in the fundamental nature of economic relationships within a society. In relation to women, the structural changes have resulted to the collapse of many small and home-based industries, thus changing the role of women in economy. It is noted that although the policy shifts have created a wide range of job opportunities for women in other countries, in PRC gender inequalities exist in the economic area wherein women experience low employment and lack of work benefits. In addition, the fact that the rate of women's employment in China is higher than other developing and some developed countries worsens the situation as it indicates that more women suffer under the discriminatory employment system.

Reducing Risks to Women Linked to Shift Work, Long Work Hours, and Related Workplace Sleep and Fatigue Issues.

PubMed

Caruso, Claire C

2015-10-01

In the United States, an estimated 12% to 28% of working women are on shift work schedules, and 12% work more than 48 hours per week. Shift work and long work hours are associated with many health and safety risks, including obesity, injuries, and negative reproductive outcomes. Over time, the worker is at risk for developing a wide range of chronic diseases. These work schedules can also strain personal relationships, owing to fatigue and poor mood from sleep deprivation and reduced quality time to spend with family and friends. Worker errors from fatigue can lead to reduced quality of goods and services, negatively impacting the employer. In addition, mistakes by fatigued workers can have far-reaching negative effects on the community, ranging from medical care errors to motor vehicle crashes and industrial disasters that endanger others. To reduce the many risks that are linked to these demanding work hours, the National Institute for Occupational Safety and Health (NIOSH) conducts research, develops guidance and authoritative recommendations, and translates and disseminates scientific information to protect workers, their families, employers, and the community. The key message to reduce these risks is making sleep a priority in the employer's systems for organizing work and in the worker's personal life. The NIOSH website has freely available online training programs with suggestions for workers and their managers to help them better cope with this workplace hazard.

Active Temperature Compensation Using a High-Temperature, Fiber Optic, Hybrid Pressure and Temperature Sensor

NASA Astrophysics Data System (ADS)

Fielder, Robert S.; Palmer, Matthew E.; Davis, Matthew A.; Engelbrecht, Gordon P.

2006-01-01

Luna Innovations has developed a novel, fiber optic, hybrid pressure-temperature sensor system for extremely high-temperature environments that is capable of reliable operation up to 1050 °C. This system is based on the extremely high-temperature fiber optic sensors already demonstrated during previous work. The novelty of the sensors presented here lies in the fact that pressure and temperature are measured simultaneously with a single fiber and a single transducer. This hybrid approach will enable highly accurate active temperature compensation and sensor self-diagnostics not possible with other platforms. Hybrid pressure and temperature sensors were calibrated by varying both pressure and temperature. Implementing active temperature compensation resulted in a ten-fold reduction in the temperature-dependence of the pressure measurement. Sensors were tested for operability in a relatively high neutron dose environment up to 6.9×1017 n/cm2. In addition to harsh environment survivability, fiber optic sensors offer a number of intrinsic advantages for space nuclear power applications including extremely low mass, immunity to electromagnetic interference, self diagnostics / prognostics, and smart sensor capability. Deploying fiber optic sensors on future space exploration missions would provide a substantial improvement in spacecraft instrumentation. Additional development is needed, however, before these advantages can be realized. This paper will highlight recent demonstrations of fiber optic sensors in environments relevant to space nuclear applications. Successes and lessons learned will be highlighted. Additionally, development needs will be covered which will suggest a framework for a coherent plan to continue work in this area.

Simulation of Attacks for Security in Wireless Sensor Network

PubMed Central

Diaz, Alvaro; Sanchez, Pablo

2016-01-01

The increasing complexity and low-power constraints of current Wireless Sensor Networks (WSN) require efficient methodologies for network simulation and embedded software performance analysis of nodes. In addition, security is also a very important feature that has to be addressed in most WSNs, since they may work with sensitive data and operate in hostile unattended environments. In this paper, a methodology for security analysis of Wireless Sensor Networks is presented. The methodology allows designing attack-aware embedded software/firmware or attack countermeasures to provide security in WSNs. The proposed methodology includes attacker modeling and attack simulation with performance analysis (node’s software execution time and power consumption estimation). After an analysis of different WSN attack types, an attacker model is proposed. This model defines three different types of attackers that can emulate most WSN attacks. In addition, this paper presents a virtual platform that is able to model the node hardware, embedded software and basic wireless channel features. This virtual simulation analyzes the embedded software behavior and node power consumption while it takes into account the network deployment and topology. Additionally, this simulator integrates the previously mentioned attacker model. Thus, the impact of attacks on power consumption and software behavior/execution-time can be analyzed. This provides developers with essential information about the effects that one or multiple attacks could have on the network, helping them to develop more secure WSN systems. This WSN attack simulator is an essential element of the attack-aware embedded software development methodology that is also introduced in this work. PMID:27869710

75 FR 56653 - Suspension of Preparation of Environmental Impact Statement for the George Bush Intercontinental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

... development needs for the airport. HAS has determined that reevaluation of the Airport Master Plan (AMP.... Based on the results of the AMP, the airfield improvements being analyzed in the EIS included the... that additional planning work is necessary to ensure that the assumptions used in the AMP remain valid...

Electrophysiology of Perception and Processing of Phonological Information as Indices of Toddlers' Language Performance

ERIC Educational Resources Information Center

Harwood, Vanessa; Preston, Jonathan; Grela, Bernard; Roy, Dooti; Harold, Olivia; Turcios, Jacqueline; Andrada, Kiyomi; Landi, Nicole

2017-01-01

Purpose: The toddler years are a critical period for language development and growth. We investigated how event-related potentials (ERPs) to repeated and novel nonwords are associated with clinical assessments of language in young children. In addition, nonword repetition (NWR) was used to measure phonological working memory to determine the…

Fragment-Based Approaches to Enhance GTP Competitive KRAS G12C Inhibitors

DTIC Science & Technology

During the current period we completed work on a series of guanine nucleotide mimetics and published results. As part of this we developed and...reported a novel method of measuring small molecule binding to KRAS G12C active site. We also published 2 additional manuscripts about KRAS G12C directed

Early Childhood Education and Health Working in Partnership: The Critical Role Early Childhood Educators Can Play in Childhood Obesity Prevention

ERIC Educational Resources Information Center

Skouteris, Helen; Edwards, Susan; Morris, Heather; Cox, Rachael; Baur, Louise; Wolfenden, Luke; Huang, Terry T. K.

2017-01-01

Preschool children's interest in popular culture is linked to many determinants of obesity development including branded energy-dense foods and sedentary play using digital technologies. In addition, highly packaged foods and throwaway toys reinforce unsustainable environmental habits encouraged by immersive marketing systems. Interrupting the…

Reactions. Learning in Science Project. Working Paper No. 37.

ERIC Educational Resources Information Center

Schollum, Brendan

The concept of a chemical reaction (as opposed to physical mixing, dissolution, or change of state) is developed in this five-part unit. In addition, the ideas that chemical reactions involve the formation of new substances and that mass is conserved in a chemical reaction are stressed. Part 1 discusses unit objectives and considers teachers'…

Child Care Assistance in 2009. Spending Update

ERIC Educational Resources Information Center

Matthews, Hannah

2011-01-01

At the beginning of 2009, with the country facing the worst of the economic crisis, the president and Congress understood that Americans needed help paying for child care to get back to work in the recession. As part of the American Recovery and Reinvestment Act, they allocated an additional $2 billion for the Child Care and Development Block…

75 FR 739 - Use of Additional Portable Oxygen Concentrator Devices on Board Aircraft

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-06

...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0... approved by the Food and Drug Administration (FDA) reduce the risks typically associated with compressed... developed small portable oxygen concentrators (POC) that work by separating oxygen from nitrogen and other...

Exploring the Antecedents of Learning-Related Emotions and Their Relations with Achievement Outcomes

ERIC Educational Resources Information Center

Niculescu, Alexandra Corina; Tempelaar, Dirk; Dailey-Hebert, Amber; Segers, Mien; Gijselaers, Wim

2015-01-01

Recent work suggests that learning-related emotions (LREs) play a crucial role in performance especially in the first year of university, a period of transition for most students; however, additional research is needed to show how these emotions emerge. We developed a framework which links a course-contextualized antecedent--academic control in…

Planning Jobs for People. Annual Report, No. 5, 1 July 71-30 June 72.

ERIC Educational Resources Information Center

Economic Development Administration (DOC), Washington, DC.

The study reports on activities which include 59 management assistance projects resulting in 1,983 jobs and payrolls amounting to $9,097,000. In addition, the report describes work with local community leaders to make available information and techniques needed to provide public facilities in support of economic development. The report describes…

State Efforts to Promote Social and Emotional Learning in Students. A Status Report

ERIC Educational Resources Information Center

Dusenbury, Linda; Weissberg, Roger P.

2017-01-01

Momentum has been growing across the country to support statewide implementation of social and emotional learning (SEL) in preschool through high school. In this brief we present an update on states' involvement in articulating goals and developing guidelines for student SEL. [Additional support for this work was provided by Pure Edge, Inc.

Evaluation of the Tribological Behavior of Krytox 143AB with Nano-onions

NASA Technical Reports Server (NTRS)

Street, Kenneth W.; Marchetti, Mario; VanderWal, Randy L.; Tomasek, Aaron J.

2003-01-01

Nanoparticles have been widely developed over the past ten years and have found several applications. This work presents the use of carbon nano-onions, i.e. nanoparticles, as a potential additive in an oil for aerospace application. It was shown that these particles can provide adequate lubrication very similar to graphitic material.

Teaching Organizational Skills through Self-Regulated Learning Strategies

ERIC Educational Resources Information Center

Cahill, Susan M.

2008-01-01

This article presents a case story of how an occupational therapist worked with Joe, a junior high student with Asperger's Syndrome, to develop better organizational skills. Self-regulated learning strategies were used to teach Joe how to keep track of his assignments as well as his grades. In addition, the case story provides a clear example of…

Cadmium stannate selective optical films for solar energy applications

NASA Technical Reports Server (NTRS)

Haacke, G.

1975-01-01

Efforts concentrated on reducing the electrical sheet resistance of sputtered cadmium stannate films, installing and testing equipment for spray coating experiments, and sputter deposition of thin cadmium sulfide layers onto cadmium stannate electrodes. In addition, single crystal silicon wafers were coated with cadmium stannate. Work also continued on the development of the backwall CdS solar cell.

Mediation of adoption and use: a key strategy for mitigating unintended consequences of health IT implementation

PubMed Central

Anders, Shilo; Gadd, Cynthia S; Lorenzi, Nancy M

2012-01-01

Objective Without careful attention to the work of users, implementation of health IT can produce new risks and inefficiencies in care. This paper uses the technology use mediation framework to examine the work of a group of nurses who serve as mediators of the adoption and use of a barcode medication administration (BCMA) system in an inpatient setting. Materials and methods The study uses ethnographic methods to explore the mediators' work. Data included field notes from observations, documents, and email communications. This variety of sources enabled triangulation of findings between activities observed, discussed in meetings, and reported in emails. Results Mediation work integrated the BCMA tool with nursing practice, anticipating and solving implementation problems. Three themes of mediation work include: resolving challenges related to coordination, integrating the physical aspects of BCMA into everyday practice, and advocacy work. Discussion Previous work suggests the following factors impact mediation effectiveness: proximity to the context of use, understanding of users' practices and norms, credibility with users, and knowledge of the technology and users' technical abilities. We describe three additional factors observed in this case: ‘influence on system developers,’ ‘influence on institutional authorities,’ and ‘understanding the network of organizational relationships that shape the users' work.’ Conclusion Institutionally supported clinicians who facilitate adoption and use of health IT systems can improve the safety and effectiveness of implementation through the management of unintended consequences. Additional research on technology use mediation can advance the science of implementation by providing decision-makers with theoretically durable, empirically grounded evidence for designing implementations. PMID:22634157

Timing matters: length of leave and working mothers' daily reentry regrets.

PubMed

Wiese, Bettina S; Ritter, Johannes O

2012-11-01

Dealing with developmental tasks in work and family domains is an important challenge for young and middle-aged adults. We investigated a transition that has evolved into a normative task for women, namely, the retransition back to paid work following maternity leave. In a diary study with 149 mothers who had just returned to work, we examined the daily experienced regrets concerning this return. In addition to personal resources (i.e., emotional stability, feeling prepared for the transition) and financial requirements needed to return to work, daily experienced family stress predicted decisional regrets. Moreover, our results suggest that leave length is related to psychological resilience in the face of day-to-day stress experiences: Late returners reported fewer regrets in general and were unaffected by daily family stress. Return-to-work regrets, in turn, were predictive of withdrawal intentions. This underlines the relevancy of the timing of the transition back to work in terms of successful development during this life phase.

Toxicological effects of the different substances in tobacco smoke on human embryonic development by a systems chemo-biology approach.

PubMed

Feltes, Bruno César; de Faria Poloni, Joice; Notari, Daniel Luis; Bonatto, Diego

2013-01-01

The physiological and molecular effects of tobacco smoke in adult humans and the development of cancer have been well described. In contrast, how tobacco smoke affects embryonic development remains poorly understood. Morphological studies of the fetuses of smoking pregnant women have shown various physical deformities induced by constant fetal exposure to tobacco components, especially nicotine. In addition, nicotine exposure decreases fetal body weight and bone/cartilage growth in addition to decreasing cranial diameter and tibia length. Unfortunately, the molecular pathways leading to these morphological anomalies are not completely understood. In this study, we applied interactome data mining tools and small compound interaction networks to elucidate possible molecular pathways associated with the effects of tobacco smoke components during embryonic development in pregnant female smokers. Our analysis showed a relationship between nicotine and 50 additional harmful substances involved in a variety of biological process that can cause abnormal proliferation, impaired cell differentiation, and increased oxidative stress. We also describe how nicotine can negatively affect retinoic acid signaling and cell differentiation through inhibition of retinoic acid receptors. In addition, nicotine causes a stress reaction and/or a pro-inflammatory response that inhibits the agonistic action of retinoic acid. Moreover, we show that the effect of cigarette smoke on the developing fetus could represent systemic and aggressive impacts in the short term, causing malformations during certain stages of development. Our work provides the first approach describing how different tobacco constituents affect a broad range of biological process in human embryonic development.